From 7e36e2f5355ab87f8946041d044b34cda01e2077 Mon Sep 17 00:00:00 2001 From: Rod Whitby Date: Tue, 1 Apr 2008 10:53:23 +0100 Subject: [ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby Signed-off-by: Russell King --- arch/arm/configs/ixp4xx_defconfig | 9 +- arch/arm/mach-ixp4xx/Kconfig | 9 ++ arch/arm/mach-ixp4xx/Makefile | 2 + arch/arm/mach-ixp4xx/fsg-pci.c | 71 +++++++++ arch/arm/mach-ixp4xx/fsg-setup.c | 276 +++++++++++++++++++++++++++++++++ include/asm-arm/arch-ixp4xx/fsg.h | 50 ++++++ include/asm-arm/arch-ixp4xx/hardware.h | 1 + include/asm-arm/arch-ixp4xx/irqs.h | 7 + 8 files changed, 421 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-ixp4xx/fsg-pci.c create mode 100644 arch/arm/mach-ixp4xx/fsg-setup.c create mode 100644 include/asm-arm/arch-ixp4xx/fsg.h diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index efa0485d2f7e..fc14932e3abd 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -165,6 +165,7 @@ CONFIG_ARCH_PRPMC1100=y CONFIG_MACH_NAS100D=y CONFIG_MACH_DSMG600=y CONFIG_ARCH_IXDP4XX=y +CONFIG_MACH_FSG=y CONFIG_CPU_IXP46X=y CONFIG_CPU_IXP43X=y CONFIG_MACH_GTWX5715=y @@ -770,7 +771,7 @@ CONFIG_ATA=y # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set +CONFIG_SATA_VIA=y # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set @@ -1143,7 +1144,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set +CONFIG_SENSORS_W83781D=y # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set @@ -1334,8 +1335,8 @@ CONFIG_LEDS_CLASS=y # # LED drivers # -# CONFIG_LEDS_IXP4XX is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_FSG=y # # LED Triggers @@ -1367,7 +1368,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set +CONFIG_RTC_DRV_ISL1208=y CONFIG_RTC_DRV_X1205=y CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_PCF8583 is not set diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index e774447c0592..db8b5fe06c0d 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -125,6 +125,15 @@ config ARCH_IXDP4XX depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435 default y +config MACH_FSG + bool + prompt "Freecom FSG-3" + select PCI + help + Say 'Y' here if you want your kernel to support Freecom's + FSG-3 device. For more information on this platform, + see http://www.nslu2-linux.org/wiki/FSG3/HomePage + # # Certain registers and IRQs are only enabled if supporting IXP465 CPUs # diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index c1956882c48b..2e6bbf927a74 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o +obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o obj-y += common.o @@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o +obj-$(CONFIG_MACH_FSG) += fsg-setup.o obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c new file mode 100644 index 000000000000..f19f3f6feda1 --- /dev/null +++ b/arch/arm/mach-ixp4xx/fsg-pci.c @@ -0,0 +1,71 @@ +/* + * arch/arch/mach-ixp4xx/fsg-pci.c + * + * FSG board-level PCI initialization + * + * Author: Rod Whitby + * Maintainer: http://www.nslu2-linux.org/ + * + * based on ixdp425-pci.c: + * Copyright (C) 2002 Intel Corporation. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include + +#include +#include + +void __init fsg_pci_preinit(void) +{ + set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW); + set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW); + set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + static int pci_irq_table[FSG_PCI_IRQ_LINES] = { + IRQ_FSG_PCI_INTC, + IRQ_FSG_PCI_INTB, + IRQ_FSG_PCI_INTA, + }; + + int irq = -1; + slot = slot - 11; + + if (slot >= 1 && slot <= FSG_PCI_MAX_DEV && + pin >= 1 && pin <= FSG_PCI_IRQ_LINES) + irq = pci_irq_table[(slot - 1)]; + printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n", + __func__, slot, pin, irq); + + return irq; +} + +struct hw_pci fsg_pci __initdata = { + .nr_controllers = 1, + .preinit = fsg_pci_preinit, + .swizzle = pci_std_swizzle, + .setup = ixp4xx_setup, + .scan = ixp4xx_scan_bus, + .map_irq = fsg_map_irq, +}; + +int __init fsg_pci_init(void) +{ + if (machine_is_fsg()) + pci_common_init(&fsg_pci); + return 0; +} + +subsys_initcall(fsg_pci_init); diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c new file mode 100644 index 000000000000..0db3a909ae61 --- /dev/null +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -0,0 +1,276 @@ +/* + * arch/arm/mach-ixp4xx/fsg-setup.c + * + * FSG board-setup + * + * Copyright (C) 2008 Rod Whitby + * + * based on ixdp425-setup.c: + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * based on nslu2-power.c + * Copyright (C) 2005 Tower Technologies + * + * Author: Rod Whitby + * Maintainers: http://www.nslu2-linux.org/ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static struct flash_platform_data fsg_flash_data = { + .map_name = "cfi_probe", + .width = 2, +}; + +static struct resource fsg_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device fsg_flash = { + .name = "IXP4XX-Flash", + .id = 0, + .dev = { + .platform_data = &fsg_flash_data, + }, + .num_resources = 1, + .resource = &fsg_flash_resource, +}; + +static struct i2c_gpio_platform_data fsg_i2c_gpio_data = { + .sda_pin = FSG_SDA_PIN, + .scl_pin = FSG_SCL_PIN, +}; + +static struct platform_device fsg_i2c_gpio = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &fsg_i2c_gpio_data, + }, +}; + +static struct i2c_board_info __initdata fsg_i2c_board_info [] = { + { + I2C_BOARD_INFO("rtc-isl1208", 0x6f), + }, +}; + +static struct resource fsg_uart_resources[] = { + { + .start = IXP4XX_UART1_BASE_PHYS, + .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IXP4XX_UART2_BASE_PHYS, + .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, + .flags = IORESOURCE_MEM, + } +}; + +static struct plat_serial8250_port fsg_uart_data[] = { + { + .mapbase = IXP4XX_UART1_BASE_PHYS, + .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { } +}; + +static struct platform_device fsg_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = fsg_uart_data, + }, + .num_resources = ARRAY_SIZE(fsg_uart_resources), + .resource = fsg_uart_resources, +}; + +static struct platform_device fsg_leds = { + .name = "fsg-led", + .id = -1, +}; + +/* Built-in 10/100 Ethernet MAC interfaces */ +static struct eth_plat_info fsg_plat_eth[] = { + { + .phy = 5, + .rxq = 3, + .txreadyq = 20, + }, { + .phy = 4, + .rxq = 4, + .txreadyq = 21, + } +}; + +static struct platform_device fsg_eth[] = { + { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEB, + .dev = { + .platform_data = fsg_plat_eth, + }, + }, { + .name = "ixp4xx_eth", + .id = IXP4XX_ETH_NPEC, + .dev = { + .platform_data = fsg_plat_eth + 1, + }, + } +}; + +static struct platform_device *fsg_devices[] __initdata = { + &fsg_i2c_gpio, + &fsg_flash, + &fsg_leds, + &fsg_eth[0], + &fsg_eth[1], +}; + +static irqreturn_t fsg_power_handler(int irq, void *dev_id) +{ + /* Signal init to do the ctrlaltdel action, this will bypass init if + * it hasn't started and do a kernel_restart. + */ + ctrl_alt_del(); + + return IRQ_HANDLED; +} + +static irqreturn_t fsg_reset_handler(int irq, void *dev_id) +{ + /* This is the paper-clip reset which does an emergency reboot. */ + printk(KERN_INFO "Restarting system.\n"); + machine_restart(NULL); + + /* This should never be reached. */ + return IRQ_HANDLED; +} + +static void __init fsg_init(void) +{ + DECLARE_MAC_BUF(mac_buf); + uint8_t __iomem *f; + int i; + + ixp4xx_sys_init(); + + fsg_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); + fsg_flash_resource.end = + IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; + + *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; + *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; + + /* Configure CS2 for operation, 8bit and writable */ + *IXP4XX_EXP_CS2 = 0xbfff0002; + + i2c_register_board_info(0, fsg_i2c_board_info, + ARRAY_SIZE(fsg_i2c_board_info)); + + /* This is only useful on a modified machine, but it is valuable + * to have it first in order to see debug messages, and so that + * it does *not* get removed if platform_add_devices fails! + */ + (void)platform_device_register(&fsg_uart); + + platform_add_devices(fsg_devices, ARRAY_SIZE(fsg_devices)); + + if (request_irq(gpio_to_irq(FSG_RB_GPIO), &fsg_reset_handler, + IRQF_DISABLED | IRQF_TRIGGER_LOW, + "FSG reset button", NULL) < 0) { + + printk(KERN_DEBUG "Reset Button IRQ %d not available\n", + gpio_to_irq(FSG_RB_GPIO)); + } + + if (request_irq(gpio_to_irq(FSG_SB_GPIO), &fsg_power_handler, + IRQF_DISABLED | IRQF_TRIGGER_LOW, + "FSG power button", NULL) < 0) { + + printk(KERN_DEBUG "Power Button IRQ %d not available\n", + gpio_to_irq(FSG_SB_GPIO)); + } + + /* + * Map in a portion of the flash and read the MAC addresses. + * Since it is stored in BE in the flash itself, we need to + * byteswap it if we're in LE mode. + */ + f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000); + if (f) { +#ifdef __ARMEB__ + for (i = 0; i < 6; i++) { + fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i); + fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i); + } +#else + + /* + Endian-swapped reads from unaligned addresses are + required to extract the two MACs from the big-endian + Redboot config area in flash. + */ + + fsg_plat_eth[0].hwaddr[0] = readb(f + 0x3C0421); + fsg_plat_eth[0].hwaddr[1] = readb(f + 0x3C0420); + fsg_plat_eth[0].hwaddr[2] = readb(f + 0x3C0427); + fsg_plat_eth[0].hwaddr[3] = readb(f + 0x3C0426); + fsg_plat_eth[0].hwaddr[4] = readb(f + 0x3C0425); + fsg_plat_eth[0].hwaddr[5] = readb(f + 0x3C0424); + + fsg_plat_eth[1].hwaddr[0] = readb(f + 0x3C0439); + fsg_plat_eth[1].hwaddr[1] = readb(f + 0x3C043F); + fsg_plat_eth[1].hwaddr[2] = readb(f + 0x3C043E); + fsg_plat_eth[1].hwaddr[3] = readb(f + 0x3C043D); + fsg_plat_eth[1].hwaddr[4] = readb(f + 0x3C043C); + fsg_plat_eth[1].hwaddr[5] = readb(f + 0x3C0443); +#endif + iounmap(f); + } + printk(KERN_INFO "FSG: Using MAC address %s for port 0\n", + print_mac(mac_buf, fsg_plat_eth[0].hwaddr)); + printk(KERN_INFO "FSG: Using MAC address %s for port 1\n", + print_mac(mac_buf, fsg_plat_eth[1].hwaddr)); + +} + +MACHINE_START(FSG, "Freecom FSG-3") + /* Maintainer: www.nslu2-linux.org */ + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixp4xx_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = fsg_init, +MACHINE_END + diff --git a/include/asm-arm/arch-ixp4xx/fsg.h b/include/asm-arm/arch-ixp4xx/fsg.h new file mode 100644 index 000000000000..c0100cc7981c --- /dev/null +++ b/include/asm-arm/arch-ixp4xx/fsg.h @@ -0,0 +1,50 @@ +/* + * include/asm-arm/arch-ixp4xx/fsg.h + * + * Freecom FSG-3 platform specific definitions + * + * Author: Rod Whitby + * Author: Tomasz Chmielewski + * Maintainers: http://www.nslu2-linux.org + * + * Based on coyote.h by + * Copyright 2004 (c) MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_HARDWARE_H__ +#error "Do not include this directly, instead #include " +#endif + +#define FSG_SDA_PIN 12 +#define FSG_SCL_PIN 13 + +/* + * FSG PCI IRQs + */ +#define FSG_PCI_MAX_DEV 3 +#define FSG_PCI_IRQ_LINES 3 + + +/* PCI controller GPIO to IRQ pin mappings */ +#define FSG_PCI_INTA_PIN 6 +#define FSG_PCI_INTB_PIN 7 +#define FSG_PCI_INTC_PIN 5 + +/* Buttons */ + +#define FSG_SB_GPIO 4 /* sync button */ +#define FSG_RB_GPIO 9 /* reset button */ +#define FSG_UB_GPIO 10 /* usb button */ + +/* LEDs */ + +#define FSG_LED_WLAN_BIT 0 +#define FSG_LED_WAN_BIT 1 +#define FSG_LED_SATA_BIT 2 +#define FSG_LED_USB_BIT 4 +#define FSG_LED_RING_BIT 5 +#define FSG_LED_SYNC_BIT 7 diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h index 73e8dc36f6a4..fa723a627854 100644 --- a/include/asm-arm/arch-ixp4xx/hardware.h +++ b/include/asm-arm/arch-ixp4xx/hardware.h @@ -45,5 +45,6 @@ #include "nslu2.h" #include "nas100d.h" #include "dsmg600.h" +#include "fsg.h" #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h index 11801605047b..674af4a84147 100644 --- a/include/asm-arm/arch-ixp4xx/irqs.h +++ b/include/asm-arm/arch-ixp4xx/irqs.h @@ -128,4 +128,11 @@ #define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7 #define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6 +/* + * Freecom FSG-3 Board IRQs + */ +#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6 +#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7 +#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5 + #endif -- cgit v1.2.3 From e055d5bff318845f99c0fbf93245767fab8dce88 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 22 Apr 2008 01:43:27 +0100 Subject: [ARM] 5015/1: arm: remove ARCH_CO285 Trying to compile a kerel for ARCH_CO285 fails with the following error: <-- snip --> ... CC arch/arm/mach-footbridge/dc21285.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c: In function 'dc21285_base_address': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:54: error: 'PCICFG0_BASE' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:54: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:54: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:57: error: 'PCICFG1_BASE' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c: In function 'dc21285_scan_bus': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/arm/mach-footbridge/dc21285.c:286: error: implicit declaration of function 'pci_scan_bus' ... make[2]: *** [arch/arm/mach-footbridge/dc21285.o] Error 1 <-- snip --> This does not seem to be a recent breakage. The ARCH_CO285 support is old - kernel 2.2.0 contains first traces of it, an it seems to have been pretty complete in later 2.2 kernels. Since it seems to be completely dead code now this patch therefore removes it. Signed-off-by: Adrian Bunk Signed-off-by: Russell King --- arch/arm/Kconfig | 10 +-------- arch/arm/Makefile | 2 -- arch/arm/mach-footbridge/Makefile | 2 -- arch/arm/mach-footbridge/co285.c | 39 --------------------------------- arch/arm/mach-footbridge/common.c | 21 ------------------ arch/arm/mach-footbridge/ebsa285-leds.c | 2 +- arch/arm/mach-footbridge/time.c | 3 +-- include/asm-arm/arch-ebsa285/hardware.h | 26 ---------------------- include/asm-arm/arch-ebsa285/memory.h | 19 ---------------- include/asm-arm/arch-ebsa285/vmalloc.h | 4 ---- 10 files changed, 3 insertions(+), 125 deletions(-) delete mode 100644 arch/arm/mach-footbridge/co285.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4039a133006e..ab78d5c421fd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -232,14 +232,6 @@ config ARCH_CLPS711X help Support for Cirrus Logic 711x/721x based boards. -config ARCH_CO285 - bool "Co-EBSA285" - select FOOTBRIDGE - select FOOTBRIDGE_ADDIN - select HAVE_IDE - help - Support for Intel's EBSA285 companion chip. - config ARCH_EBSA110 bool "EBSA-110" select ISA @@ -784,7 +776,7 @@ source "mm/Kconfig" config LEDS bool "Timer and CPU usage LEDs" - depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \ + depends on ARCH_CDB89712 || ARCH_EBSA110 || \ ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \ ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 1a4649667ec8..79b8ca3400e0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -100,8 +100,6 @@ textofs-y := 0x00008000 incdir-$(CONFIG_ARCH_CLPS7500) := cl7500 machine-$(CONFIG_FOOTBRIDGE) := footbridge incdir-$(CONFIG_FOOTBRIDGE) := ebsa285 - machine-$(CONFIG_ARCH_CO285) := footbridge - incdir-$(CONFIG_ARCH_CO285) := ebsa285 machine-$(CONFIG_ARCH_SHARK) := shark machine-$(CONFIG_ARCH_SA1100) := sa1100 ifeq ($(CONFIG_ARCH_SA1100),y) diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index 0694ad6b6476..32f8609e4f85 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -14,12 +14,10 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o -leds-$(CONFIG_ARCH_CO285) += ebsa285-leds.o leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o -obj-$(CONFIG_ARCH_CO285) += co285.o dc21285-timer.o obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o diff --git a/arch/arm/mach-footbridge/co285.c b/arch/arm/mach-footbridge/co285.c deleted file mode 100644 index 4545576ad8d9..000000000000 --- a/arch/arm/mach-footbridge/co285.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * linux/arch/arm/mach-footbridge/co285.c - * - * CO285 machine fixup - */ -#include - -#include -#include - -#include - -#include "common.h" - -static void __init -fixup_coebsa285(struct machine_desc *desc, struct tag *tags, - char **cmdline, struct meminfo *mi) -{ - extern unsigned long boot_memory_end; - extern char boot_command_line[]; - - mi->nr_banks = 1; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].size = boot_memory_end; - mi->bank[0].node = 0; - - *cmdline = boot_command_line; -} - -MACHINE_START(CO285, "co-EBSA285") - /* Maintainer: Mark van Doesburg */ - .phys_io = DC21285_ARMCSR_BASE, - .io_pg_offst = ((0x7cf00000) >> 18) & 0xfffc, - .fixup = fixup_coebsa285, - .map_io = footbridge_map_io, - .init_irq = footbridge_init_irq, - .timer = &footbridge_timer, -MACHINE_END - diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index ef29fc34ce65..b08ab507c052 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -177,25 +177,6 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = { #endif }; -/* - * The CO-ebsa285 mapping. - */ -static struct map_desc co285_io_desc[] __initdata = { -#ifdef CONFIG_ARCH_CO285 - { - .virtual = PCIO_BASE, - .pfn = __phys_to_pfn(DC21285_PCI_IO), - .length = PCIO_SIZE, - .type = MT_DEVICE, - }, { - .virtual = PCIMEM_BASE, - .pfn = __phys_to_pfn(DC21285_PCI_MEM), - .length = PCIMEM_SIZE, - .type = MT_DEVICE, - }, -#endif -}; - void __init footbridge_map_io(void) { /* @@ -208,8 +189,6 @@ void __init footbridge_map_io(void) * Now, work out what we've got to map in addition on this * platform. */ - if (machine_is_co285()) - iotable_init(co285_io_desc, ARRAY_SIZE(co285_io_desc)); if (footbridge_cfn_mode()) iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); } diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c index a64e22226515..09c1fbc51876 100644 --- a/arch/arm/mach-footbridge/ebsa285-leds.c +++ b/arch/arm/mach-footbridge/ebsa285-leds.c @@ -128,7 +128,7 @@ static void ebsa285_leds_event(led_event_t evt) static int __init leds_init(void) { - if (machine_is_ebsa285() || machine_is_co285()) + if (machine_is_ebsa285()) leds_event = ebsa285_leds_event; leds_event(led_start); diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c index 5d02e95dede3..d5cfcda385d6 100644 --- a/arch/arm/mach-footbridge/time.c +++ b/arch/arm/mach-footbridge/time.c @@ -115,8 +115,7 @@ static int set_isa_cmos_time(void) void __init isa_rtc_init(void) { - if (machine_is_co285() || - machine_is_personal_server()) + if (machine_is_personal_server()) /* * Add-in 21285s shouldn't access the RTC */ diff --git a/include/asm-arm/arch-ebsa285/hardware.h b/include/asm-arm/arch-ebsa285/hardware.h index daad8ee2d194..74610c2c63d4 100644 --- a/include/asm-arm/arch-ebsa285/hardware.h +++ b/include/asm-arm/arch-ebsa285/hardware.h @@ -14,7 +14,6 @@ #include -#ifdef CONFIG_ARCH_FOOTBRIDGE /* Virtual Physical Size * 0xff800000 0x40000000 1MB X-Bus * 0xff000000 0x7c000000 1MB PCI I/O space @@ -50,31 +49,6 @@ #define PCIMEM_SIZE 0x01000000 #define PCIMEM_BASE 0xf0000000 -#elif defined(CONFIG_ARCH_CO285) -/* - * This is the COEBSA285 cut-down mapping - */ -#define PCIMEM_SIZE 0x80000000 -#define PCIMEM_BASE 0x80000000 - -#define WFLUSH_SIZE 0x01000000 -#define WFLUSH_BASE 0x7d000000 - -#define ARMCSR_SIZE 0x00100000 -#define ARMCSR_BASE 0x7cf00000 - -#define XBUS_SIZE 0x00020000 -#define XBUS_BASE 0x7cee0000 - -#define PCIO_SIZE 0x00010000 -#define PCIO_BASE 0x7ced0000 - -#else - -#error "Undefined footbridge architecture" - -#endif - #define XBUS_LEDS ((volatile unsigned char *)(XBUS_BASE + 0x12000)) #define XBUS_LED_AMBER (1 << 0) #define XBUS_LED_GREEN (1 << 1) diff --git a/include/asm-arm/arch-ebsa285/memory.h b/include/asm-arm/arch-ebsa285/memory.h index cbd7ae64bcc9..9019a3bf5ab9 100644 --- a/include/asm-arm/arch-ebsa285/memory.h +++ b/include/asm-arm/arch-ebsa285/memory.h @@ -42,8 +42,6 @@ extern unsigned long __bus_to_virt(unsigned long); #endif -#if defined(CONFIG_ARCH_FOOTBRIDGE) - /* Task size and page offset at 3GB */ #define TASK_SIZE UL(0xbf000000) #define PAGE_OFFSET UL(0xc0000000) @@ -53,23 +51,6 @@ extern unsigned long __bus_to_virt(unsigned long); */ #define FLUSH_BASE 0xf9000000 -#elif defined(CONFIG_ARCH_CO285) - -/* Task size and page offset at 1.5GB */ -#define TASK_SIZE UL(0x5f000000) -#define PAGE_OFFSET UL(0x60000000) - -/* - * Cache flushing area. - */ -#define FLUSH_BASE 0x7e000000 - -#else - -#error "Undefined footbridge architecture" - -#endif - /* * Physical DRAM offset. */ diff --git a/include/asm-arm/arch-ebsa285/vmalloc.h b/include/asm-arm/arch-ebsa285/vmalloc.h index 02598200997d..e487d7e8c8a6 100644 --- a/include/asm-arm/arch-ebsa285/vmalloc.h +++ b/include/asm-arm/arch-ebsa285/vmalloc.h @@ -7,8 +7,4 @@ */ -#ifdef CONFIG_ARCH_FOOTBRIDGE #define VMALLOC_END (PAGE_OFFSET + 0x30000000) -#else -#define VMALLOC_END (PAGE_OFFSET + 0x20000000) -#endif -- cgit v1.2.3 From 205bee6ad804d7034773b5978c74dde495df2301 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 13:57:26 +0100 Subject: [ARM] dyntick: Remove obsolete and unused ARM dyntick support dyntick is superseded by the clocksource/clockevent infrastructure, using the NO_HZ configuration option. No one implements dyntick on ARM anymore, so it's pointless keeping it around. Remove dyntick support. Signed-off-by: Russell King --- arch/arm/Kconfig | 21 ------ arch/arm/configs/at91cap9adk_defconfig | 1 - arch/arm/configs/at91rm9200dk_defconfig | 1 - arch/arm/configs/at91rm9200ek_defconfig | 1 - arch/arm/configs/at91sam9260ek_defconfig | 1 - arch/arm/configs/at91sam9261ek_defconfig | 1 - arch/arm/configs/at91sam9263ek_defconfig | 1 - arch/arm/configs/at91sam9rlek_defconfig | 1 - arch/arm/configs/ateb9200_defconfig | 1 - arch/arm/configs/cm_x270_defconfig | 1 - arch/arm/configs/collie_defconfig | 1 - arch/arm/configs/corgi_defconfig | 1 - arch/arm/configs/ecbat91_defconfig | 1 - arch/arm/configs/em_x270_defconfig | 1 - arch/arm/configs/ep93xx_defconfig | 1 - arch/arm/configs/eseries_pxa_defconfig | 1 - arch/arm/configs/iop13xx_defconfig | 1 - arch/arm/configs/iop32x_defconfig | 1 - arch/arm/configs/iop33x_defconfig | 1 - arch/arm/configs/ixp2000_defconfig | 1 - arch/arm/configs/ixp23xx_defconfig | 1 - arch/arm/configs/kafa_defconfig | 1 - arch/arm/configs/kb9202_defconfig | 1 - arch/arm/configs/ks8695_defconfig | 1 - arch/arm/configs/lpd270_defconfig | 1 - arch/arm/configs/lpd7a404_defconfig | 1 - arch/arm/configs/netx_defconfig | 1 - arch/arm/configs/onearm_defconfig | 1 - arch/arm/configs/picotux200_defconfig | 1 - arch/arm/configs/pnx4008_defconfig | 1 - arch/arm/configs/realview-smp_defconfig | 1 - arch/arm/configs/realview_defconfig | 1 - arch/arm/configs/rpc_defconfig | 1 - arch/arm/configs/s3c2410_defconfig | 1 - arch/arm/configs/sam9_l9260_defconfig | 1 - arch/arm/configs/spitz_defconfig | 1 - arch/arm/configs/tct_hammer_defconfig | 1 - arch/arm/configs/trizeps4_defconfig | 1 - arch/arm/configs/versatile_defconfig | 1 - arch/arm/kernel/process.c | 4 +- arch/arm/kernel/time.c | 120 ------------------------------- arch/arm/mach-omap1/pm.c | 7 -- arch/arm/mach-omap2/pm.c | 7 -- include/asm-arm/dyntick.h | 6 -- include/asm-arm/hw_irq.h | 11 --- include/asm-arm/mach/time.h | 22 ------ 46 files changed, 1 insertion(+), 235 deletions(-) delete mode 100644 include/asm-arm/dyntick.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b786e68914d4..167824e24edc 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -703,27 +703,6 @@ config PREEMPT Say Y here if you are building a kernel for a desktop, embedded or real-time system. Say N if you are unsure. -config NO_IDLE_HZ - bool "Dynamic tick timer" - depends on !GENERIC_CLOCKEVENTS - help - Select this option if you want to disable continuous timer ticks - and have them programmed to occur as required. This option saves - power as the system can remain in idle state for longer. - - By default dynamic tick is disabled during the boot, and can be - manually enabled with: - - echo 1 > /sys/devices/system/timer/timer0/dyn_tick - - Alternatively, if you want dynamic tick automatically enabled - during boot, pass "dyntick=enable" via the kernel command string. - - Please note that dynamic tick may affect the accuracy of - timekeeping on some platforms depending on the implementation. - Currently at least OMAP, PXA2xx and SA11x0 platforms are known - to have accurate timekeeping with dynamic tick. - config HZ int default 128 if ARCH_L7200 diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig index e32e73648129..b8e73e95598d 100644 --- a/arch/arm/configs/at91cap9adk_defconfig +++ b/arch/arm/configs/at91cap9adk_defconfig @@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index 2dbbbc3d4ac3..868fb7b9530b 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -169,7 +169,6 @@ CONFIG_AT91_CF=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index 6e994f7820c6..de43fc675616 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -160,7 +160,6 @@ CONFIG_ISA_DMA_API=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index f659c938473f..2011adfa6758 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -220,7 +220,6 @@ CONFIG_CPU_CP15_MMU=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index 3802e85f7483..4049768962d2 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index 32a0d74e0c89..fa1c5aecb5a8 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -213,7 +213,6 @@ CONFIG_CPU_CP15_MMU=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig index 98e6746d02be..d8ec5f9ca6ec 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rlek_defconfig @@ -211,7 +211,6 @@ CONFIG_CPU_CP15_MMU=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig index d846a492e5ce..85c80f723d8e 100644 --- a/arch/arm/configs/ateb9200_defconfig +++ b/arch/arm/configs/ateb9200_defconfig @@ -171,7 +171,6 @@ CONFIG_AT91_CF=m # Kernel Features # CONFIG_PREEMPT=y -CONFIG_NO_IDLE_HZ=y CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/cm_x270_defconfig b/arch/arm/configs/cm_x270_defconfig index 5cab08397ae7..33b201c3b309 100644 --- a/arch/arm/configs/cm_x270_defconfig +++ b/arch/arm/configs/cm_x270_defconfig @@ -194,7 +194,6 @@ CONFIG_PCI_HOST_ITE8152=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 4264e273202d..f7622e658163 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -166,7 +166,6 @@ CONFIG_PCMCIA_SA1100=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set CONFIG_ARCH_DISCONTIGMEM_ENABLE=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index e8980a9bb893..9b8748a8d9dd 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -165,7 +165,6 @@ CONFIG_PCMCIA_PXA2XX=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig index 90ed214e3673..cfeb817ad21a 100644 --- a/arch/arm/configs/ecbat91_defconfig +++ b/arch/arm/configs/ecbat91_defconfig @@ -230,7 +230,6 @@ CONFIG_AT91_CF=y # # CONFIG_TICK_ONESHOT is not set CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig index 6bea0901bdf0..d3114c23603b 100644 --- a/arch/arm/configs/em_x270_defconfig +++ b/arch/arm/configs/em_x270_defconfig @@ -197,7 +197,6 @@ CONFIG_XSCALE_PMU=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 24a701ab33e5..21aa013793c6 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -184,7 +184,6 @@ CONFIG_ARM_AMBA=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index ed487b90dbed..493ecee24f94 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -251,7 +251,6 @@ CONFIG_PCMCIA_PXA2XX=m # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index 988b4d13e76f..482e57061053 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -197,7 +197,6 @@ CONFIG_PCI_LEGACY=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index 83f40d4041a6..8612f58e1056 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -201,7 +201,6 @@ CONFIG_PCI_LEGACY=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index 917afb5ccfac..8b0098d19d08 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -197,7 +197,6 @@ CONFIG_PCI_LEGACY=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig index f8f9793b526f..84680db6c615 100644 --- a/arch/arm/configs/ixp2000_defconfig +++ b/arch/arm/configs/ixp2000_defconfig @@ -184,7 +184,6 @@ CONFIG_PCI=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig index 27cf022dd807..4a2f7b2372db 100644 --- a/arch/arm/configs/ixp23xx_defconfig +++ b/arch/arm/configs/ixp23xx_defconfig @@ -180,7 +180,6 @@ CONFIG_PCI=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig index ae51a40db6f9..6dd95a2c8d5d 100644 --- a/arch/arm/configs/kafa_defconfig +++ b/arch/arm/configs/kafa_defconfig @@ -162,7 +162,6 @@ CONFIG_CPU_TLB_V4WBI=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig index c16537d9d67a..8e74c66f239d 100644 --- a/arch/arm/configs/kb9202_defconfig +++ b/arch/arm/configs/kb9202_defconfig @@ -126,7 +126,6 @@ CONFIG_ISA_DMA_API=y # # Kernel Features # -# CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig index 8ab21a0719e9..6077f2cb88e4 100644 --- a/arch/arm/configs/ks8695_defconfig +++ b/arch/arm/configs/ks8695_defconfig @@ -174,7 +174,6 @@ CONFIG_PCCARD_NONSTATIC=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig index a3bf5833b87a..1a38d8e3fe66 100644 --- a/arch/arm/configs/lpd270_defconfig +++ b/arch/arm/configs/lpd270_defconfig @@ -173,7 +173,6 @@ CONFIG_XSCALE_PMU=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig index 46a0f7fe1fa5..7a2e932da1c6 100644 --- a/arch/arm/configs/lpd7a404_defconfig +++ b/arch/arm/configs/lpd7a404_defconfig @@ -148,7 +148,6 @@ CONFIG_ARM_AMBA=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set # CONFIG_AEABI is not set CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig index 57f32f39d0ff..0884f2370c3a 100644 --- a/arch/arm/configs/netx_defconfig +++ b/arch/arm/configs/netx_defconfig @@ -154,7 +154,6 @@ CONFIG_ARM_AMBA=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig index 650a248613e5..418ca2febbe3 100644 --- a/arch/arm/configs/onearm_defconfig +++ b/arch/arm/configs/onearm_defconfig @@ -202,7 +202,6 @@ CONFIG_AT91_CF=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig index 95a22f512805..14826f0dabde 100644 --- a/arch/arm/configs/picotux200_defconfig +++ b/arch/arm/configs/picotux200_defconfig @@ -201,7 +201,6 @@ CONFIG_ARM_THUMB=y # Kernel Features # # CONFIG_PREEMPT is not set -CONFIG_NO_IDLE_HZ=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig index b5e11aa2e290..811b8f60d19d 100644 --- a/arch/arm/configs/pnx4008_defconfig +++ b/arch/arm/configs/pnx4008_defconfig @@ -151,7 +151,6 @@ CONFIG_ARM_THUMB=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index fc39ba1a89f3..0c09b23167ec 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -177,7 +177,6 @@ CONFIG_NR_CPUS=4 CONFIG_HOTPLUG_CPU=y CONFIG_LOCAL_TIMERS=y # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index accbf529ce5b..907e54344dad 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -126,7 +126,6 @@ CONFIG_ISA_DMA_API=y # # Kernel Features # -# CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index 5ddecb9ddf01..f62d1817d2c6 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -190,7 +190,6 @@ CONFIG_ISA_DMA_API=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index f8a1645b3d4a..6d03763773bf 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -246,7 +246,6 @@ CONFIG_ISA=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=200 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig index 484dc9739dfc..8688362bcf7b 100644 --- a/arch/arm/configs/sam9_l9260_defconfig +++ b/arch/arm/configs/sam9_l9260_defconfig @@ -211,7 +211,6 @@ CONFIG_ARM_THUMB=y # # CONFIG_TICK_ONESHOT is not set CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index aa7a01179500..7d59fb1f1cea 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -164,7 +164,6 @@ CONFIG_PCMCIA_PXA2XX=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 576b8339f0d6..07dfb98df4f0 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -247,7 +247,6 @@ CONFIG_ARM_THUMB=y # # CONFIG_TICK_ONESHOT is not set # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=200 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index 6db6392806f9..8b7a431a8bfc 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -195,7 +195,6 @@ CONFIG_PCMCIA_PXA2XX=y # Kernel Features # CONFIG_PREEMPT=y -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index 48dca69addae..8355f88f7292 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -151,7 +151,6 @@ CONFIG_ARM_AMBA=y # Kernel Features # # CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set CONFIG_HZ=100 # CONFIG_AEABI is not set # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 46bf2ede6128..199b3680118b 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -133,10 +133,8 @@ static void default_idle(void) cpu_relax(); else { local_irq_disable(); - if (!need_resched()) { - timer_dyn_reprogram(); + if (!need_resched()) arch_idle(); - } local_irq_enable(); } } diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index b5867eca1d0b..cc5145b28e7f 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -365,108 +365,6 @@ static struct sysdev_class timer_sysclass = { .resume = timer_resume, }; -#ifdef CONFIG_NO_IDLE_HZ -static int timer_dyn_tick_enable(void) -{ - struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; - unsigned long flags; - int ret = -ENODEV; - - if (dyn_tick) { - spin_lock_irqsave(&dyn_tick->lock, flags); - ret = 0; - if (!(dyn_tick->state & DYN_TICK_ENABLED)) { - ret = dyn_tick->enable(); - - if (ret == 0) - dyn_tick->state |= DYN_TICK_ENABLED; - } - spin_unlock_irqrestore(&dyn_tick->lock, flags); - } - - return ret; -} - -static int timer_dyn_tick_disable(void) -{ - struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; - unsigned long flags; - int ret = -ENODEV; - - if (dyn_tick) { - spin_lock_irqsave(&dyn_tick->lock, flags); - ret = 0; - if (dyn_tick->state & DYN_TICK_ENABLED) { - ret = dyn_tick->disable(); - - if (ret == 0) - dyn_tick->state &= ~DYN_TICK_ENABLED; - } - spin_unlock_irqrestore(&dyn_tick->lock, flags); - } - - return ret; -} - -/* - * Reprogram the system timer for at least the calculated time interval. - * This function should be called from the idle thread with IRQs disabled, - * immediately before sleeping. - */ -void timer_dyn_reprogram(void) -{ - struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick; - unsigned long next, seq, flags; - - if (!dyn_tick) - return; - - spin_lock_irqsave(&dyn_tick->lock, flags); - if (dyn_tick->state & DYN_TICK_ENABLED) { - next = next_timer_interrupt(); - do { - seq = read_seqbegin(&xtime_lock); - dyn_tick->reprogram(next - jiffies); - } while (read_seqretry(&xtime_lock, seq)); - } - spin_unlock_irqrestore(&dyn_tick->lock, flags); -} - -static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf) -{ - return sprintf(buf, "%i\n", - (system_timer->dyn_tick->state & DYN_TICK_ENABLED) >> 1); -} - -static ssize_t timer_set_dyn_tick(struct sys_device *dev, const char *buf, - size_t count) -{ - unsigned int enable = simple_strtoul(buf, NULL, 2); - - if (enable) - timer_dyn_tick_enable(); - else - timer_dyn_tick_disable(); - - return count; -} -static SYSDEV_ATTR(dyn_tick, 0644, timer_show_dyn_tick, timer_set_dyn_tick); - -/* - * dyntick=enable|disable - */ -static char dyntick_str[4] __initdata = ""; - -static int __init dyntick_setup(char *str) -{ - if (str) - strlcpy(dyntick_str, str, sizeof(dyntick_str)); - return 1; -} - -__setup("dyntick=", dyntick_setup); -#endif - static int __init timer_init_sysfs(void) { int ret = sysdev_class_register(&timer_sysclass); @@ -475,19 +373,6 @@ static int __init timer_init_sysfs(void) ret = sysdev_register(&system_timer->dev); } -#ifdef CONFIG_NO_IDLE_HZ - if (ret == 0 && system_timer->dyn_tick) { - ret = sysdev_create_file(&system_timer->dev, &attr_dyn_tick); - - /* - * Turn on dynamic tick after calibrate delay - * for correct bogomips - */ - if (ret == 0 && dyntick_str[0] == 'e') - ret = timer_dyn_tick_enable(); - } -#endif - return ret; } @@ -500,10 +385,5 @@ void __init time_init(void) system_timer->offset = dummy_gettimeoffset; #endif system_timer->init(); - -#ifdef CONFIG_NO_IDLE_HZ - if (system_timer->dyn_tick) - spin_lock_init(&system_timer->dyn_tick->lock); -#endif } diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index e6c64e10b7ec..742f79e73bd7 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -116,13 +116,6 @@ void omap_pm_idle(void) return; } - /* - * Since an interrupt may set up a timer, we don't want to - * reprogram the hardware timer with interrupts enabled. - * Re-enable interrupts only after returning from idle. - */ - timer_dyn_reprogram(); - #ifdef CONFIG_OMAP_MPU_TIMER #warning Enable 32kHz OS timer in order to allow sleep states in idle use_idlect1 = use_idlect1 & ~(1 << 9); diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index aad781dcf1b1..d6c9de82ca0c 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -57,13 +57,6 @@ void omap2_pm_idle(void) return; } - /* - * Since an interrupt may set up a timer, we don't want to - * reprogram the hardware timer with interrupts enabled. - * Re-enable interrupts only after returning from idle. - */ - timer_dyn_reprogram(); - omap2_sram_idle(); local_fiq_enable(); local_irq_enable(); diff --git a/include/asm-arm/dyntick.h b/include/asm-arm/dyntick.h deleted file mode 100644 index 19fab2d2b760..000000000000 --- a/include/asm-arm/dyntick.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASMARM_DYNTICK_H -#define _ASMARM_DYNTICK_H - -#include - -#endif /* _ASMARM_DYNTICK_H */ diff --git a/include/asm-arm/hw_irq.h b/include/asm-arm/hw_irq.h index 98d594a973d6..f1a08a500604 100644 --- a/include/asm-arm/hw_irq.h +++ b/include/asm-arm/hw_irq.h @@ -6,15 +6,4 @@ #include -#if defined(CONFIG_NO_IDLE_HZ) -# include -# define handle_dynamic_tick(action) \ - if (!(action->flags & IRQF_TIMER) && system_timer->dyn_tick) { \ - write_seqlock(&xtime_lock); \ - if (system_timer->dyn_tick->state & DYN_TICK_ENABLED) \ - system_timer->dyn_tick->handler(irq, NULL); \ - write_sequnlock(&xtime_lock); \ - } -#endif - #endif diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h index 5dc357013b79..2fd36ea0130d 100644 --- a/include/asm-arm/mach/time.h +++ b/include/asm-arm/mach/time.h @@ -41,30 +41,8 @@ struct sys_timer { #ifndef CONFIG_GENERIC_TIME unsigned long (*offset)(void); #endif - -#ifdef CONFIG_NO_IDLE_HZ - struct dyn_tick_timer *dyn_tick; -#endif -}; - -#ifdef CONFIG_NO_IDLE_HZ - -#define DYN_TICK_ENABLED (1 << 1) - -struct dyn_tick_timer { - spinlock_t lock; - unsigned int state; /* Current state */ - int (*enable)(void); /* Enables dynamic tick */ - int (*disable)(void); /* Disables dynamic tick */ - void (*reprogram)(unsigned long); /* Reprograms the timer */ - int (*handler)(int, void *); }; -void timer_dyn_reprogram(void); -#else -#define timer_dyn_reprogram() do { } while (0) -#endif - extern struct sys_timer *system_timer; extern void timer_tick(void); -- cgit v1.2.3 From ee9c578527a93c66becb526c4a122c5358a959c5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 13:59:33 +0100 Subject: dyntick: Remove last reminants of dyntick support Remove the last reminants of dyntick support from the generic kernel. Signed-off-by: Russell King --- kernel/hrtimer.c | 2 +- kernel/sysctl.c | 12 ------------ kernel/timer.c | 10 +--------- 3 files changed, 2 insertions(+), 22 deletions(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 421be5fe5cc7..543d9ca9b4f4 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1078,7 +1078,7 @@ ktime_t hrtimer_get_remaining(const struct hrtimer *timer) } EXPORT_SYMBOL_GPL(hrtimer_get_remaining); -#if defined(CONFIG_NO_IDLE_HZ) || defined(CONFIG_NO_HZ) +#ifdef CONFIG_NO_HZ /** * hrtimer_get_next_event - get the time until next expiry event * diff --git a/kernel/sysctl.c b/kernel/sysctl.c index d7ffdc59816a..76426d930077 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -131,8 +131,6 @@ extern int sysctl_userprocess_debug; extern int spin_retry; #endif -extern int sysctl_hz_timer; - #ifdef CONFIG_BSD_PROCESS_ACCT extern int acct_parm[]; #endif @@ -561,16 +559,6 @@ static struct ctl_table kern_table[] = { .mode = 0644, .proc_handler = &proc_dointvec, }, -#endif -#ifdef CONFIG_NO_IDLE_HZ - { - .ctl_name = KERN_HZ_TIMER, - .procname = "hz_timer", - .data = &sysctl_hz_timer, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = &proc_dointvec, - }, #endif { .ctl_name = KERN_S390_USER_DEBUG_LOGGING, diff --git a/kernel/timer.c b/kernel/timer.c index ceacc6626572..ef3fa6906e8f 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -812,7 +812,7 @@ static inline void __run_timers(struct tvec_base *base) spin_unlock_irq(&base->lock); } -#if defined(CONFIG_NO_IDLE_HZ) || defined(CONFIG_NO_HZ) +#ifdef CONFIG_NO_HZ /* * Find out when the next timer event is due to happen. This * is used on S/390 to stop all activity when a cpus is idle. @@ -947,14 +947,6 @@ unsigned long get_next_timer_interrupt(unsigned long now) return cmp_next_hrtimer_event(now, expires); } - -#ifdef CONFIG_NO_IDLE_HZ -unsigned long next_timer_interrupt(void) -{ - return get_next_timer_interrupt(jiffies); -} -#endif - #endif #ifndef CONFIG_VIRT_CPU_ACCOUNTING -- cgit v1.2.3 From 150c9173031d43746d70582a17931350f3da8932 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 12 May 2008 17:37:21 +0100 Subject: dyntick: remove deferences from SH SH does not have a configuration option for NO_IDLE_HZ their Kconfig files, yet their defconfig files lists them. Remove those references. Signed-off-by: Russell King --- arch/sh/configs/landisk_defconfig | 1 - arch/sh/configs/lboxre2_defconfig | 1 - arch/sh/configs/se7705_defconfig | 1 - arch/sh/configs/se7712_defconfig | 1 - arch/sh/configs/se7750_defconfig | 1 - 5 files changed, 5 deletions(-) diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig index f52db125432f..38f934ab50c7 100644 --- a/arch/sh/configs/landisk_defconfig +++ b/arch/sh/configs/landisk_defconfig @@ -226,7 +226,6 @@ CONFIG_CPU_HAS_PTEA=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=33333333 # diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig index 9fa66d92a4e7..b68b6cdbb78f 100644 --- a/arch/sh/configs/lboxre2_defconfig +++ b/arch/sh/configs/lboxre2_defconfig @@ -231,7 +231,6 @@ CONFIG_CPU_HAS_PTEA=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=40000000 # diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig index 84717d854867..490dcbc2ce33 100644 --- a/arch/sh/configs/se7705_defconfig +++ b/arch/sh/configs/se7705_defconfig @@ -239,7 +239,6 @@ CONFIG_CPU_HAS_SR_RB=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=33333333 # diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig index 240a1cef69aa..2dd83af988f0 100644 --- a/arch/sh/configs/se7712_defconfig +++ b/arch/sh/configs/se7712_defconfig @@ -236,7 +236,6 @@ CONFIG_CPU_HAS_SR_RB=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=66666666 # diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig index c60b6fd4fc42..167786f9a9bd 100644 --- a/arch/sh/configs/se7750_defconfig +++ b/arch/sh/configs/se7750_defconfig @@ -235,7 +235,6 @@ CONFIG_CPU_HAS_PTEA=y # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 -# CONFIG_NO_IDLE_HZ is not set CONFIG_SH_PCLK_FREQ=33333333 # -- cgit v1.2.3 From 6fd592daae2182adc47f405e20d07f34f52d07dd Mon Sep 17 00:00:00 2001 From: "Carlos R. Mafra" Date: Mon, 5 May 2008 20:11:22 -0300 Subject: x86: clean up computation of HPET .mult variables While reading through the HPET code I realized that the computation of .mult variables could be done with less lines of code, resulting in a 1.6% text size saving for hpet.o So I propose the following patch, which applies against today's Linus -git tree. >From 0c6507e400e9ca5f7f14331e18f8c12baf75a9d3 Mon Sep 17 00:00:00 2001 From: Carlos R. Mafra Date: Mon, 5 May 2008 19:38:53 -0300 The computation of clocksource_hpet.mult tmp = (u64)hpet_period << HPET_SHIFT; do_div(tmp, FSEC_PER_NSEC); clocksource_hpet.mult = (u32)tmp; can be streamlined if we note that it is equal to clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT); Furthermore, the computation of hpet_clockevent.mult uint64_t hpet_freq; hpet_freq = 1000000000000000ULL; do_div(hpet_freq, hpet_period); hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, NSEC_PER_SEC, hpet_clockevent.shift); can also be streamlined with the observation that hpet_period and hpet_freq are inverse to each other (in proper units). So instead of computing hpet_freq and using (schematically) div_sc(hpet_freq, 10^9, shift) we use the trick of calling with the arguments in reverse order, div_sc(10^6, hpet_period, shift). The different power of ten is due to frequency being in Hertz (1/sec) and the period being in units of femtosecond. Explicitly, mult = (hpet_freq * 2^shift)/10^9 (before) mult = (10^6 * 2^shift)/hpet_period (after) because hpet_freq = 10^15/hpet_period. The comments in the code are also updated to reflect the changes. As a result, text data bss dec hex filename 2957 425 92 3474 d92 arch/x86/kernel/hpet.o 3006 425 92 3523 dc3 arch/x86/kernel/hpet.o.old a 1.6% reduction in text size. Signed-off-by: Carlos R. Mafra Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/hpet.c | 43 ++++++++++++++++++------------------------- 1 file changed, 18 insertions(+), 25 deletions(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 9b5cfcdfc426..ea230ec69057 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -17,7 +17,7 @@ /* FSEC = 10^-15 NSEC = 10^-9 */ -#define FSEC_PER_NSEC 1000000 +#define FSEC_PER_NSEC 1000000L /* * HPET address is set in acpi/boot.c, when an ACPI entry exists @@ -206,20 +206,19 @@ static void hpet_enable_legacy_int(void) static void hpet_legacy_clockevent_register(void) { - uint64_t hpet_freq; - /* Start HPET legacy interrupts */ hpet_enable_legacy_int(); /* - * The period is a femto seconds value. We need to calculate the - * scaled math multiplication factor for nanosecond to hpet tick - * conversion. + * The mult factor is defined as (include/linux/clockchips.h) + * mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h) + * hpet_period is in units of femtoseconds (per cycle), so + * mult/2^shift = cyc/ns = 10^6/hpet_period + * mult = (10^6 * 2^shift)/hpet_period + * mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period */ - hpet_freq = 1000000000000000ULL; - do_div(hpet_freq, hpet_period); - hpet_clockevent.mult = div_sc((unsigned long) hpet_freq, - NSEC_PER_SEC, hpet_clockevent.shift); + hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC, + hpet_period, hpet_clockevent.shift); /* Calculate the min / max delta */ hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, &hpet_clockevent); @@ -324,7 +323,7 @@ static struct clocksource clocksource_hpet = { static int hpet_clocksource_register(void) { - u64 tmp, start, now; + u64 start, now; cycle_t t1; /* Start the counter */ @@ -351,21 +350,15 @@ static int hpet_clocksource_register(void) return -ENODEV; } - /* Initialize and register HPET clocksource - * - * hpet period is in femto seconds per cycle - * so we need to convert this to ns/cyc units - * approximated by mult/2^shift - * - * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift - * fsec/cyc * 1ns/1000000fsec * 2^shift = mult - * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult - * (fsec/cyc << shift)/1000000 = mult - * (hpet_period << shift)/FSEC_PER_NSEC = mult + /* + * The definition of mult is (include/linux/clocksource.h) + * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc + * so we first need to convert hpet_period to ns/cyc units: + * mult/2^shift = ns/cyc = hpet_period/10^6 + * mult = (hpet_period * 2^shift)/10^6 + * mult = (hpet_period << shift)/FSEC_PER_NSEC */ - tmp = (u64)hpet_period << HPET_SHIFT; - do_div(tmp, FSEC_PER_NSEC); - clocksource_hpet.mult = (u32)tmp; + clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT); clocksource_register(&clocksource_hpet); -- cgit v1.2.3 From e8aa4667baf74dfd85fbaab86861465acb811085 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 9 May 2008 11:49:11 +0200 Subject: x86: enable hpet=force for AMD SB400 Add quirk to allow forced usage of HPET on ATI SB400. I stumbled over machines where HPET is enabled but not reported by BIOS. This patch configures the HPET base address and makes it known to the OS. Signed-off-by: Andreas Herrmann Signed-off-by: Thomas Gleixner --- arch/x86/kernel/quirks.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index d89a648fe710..5fe6bd5cc4c7 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -65,6 +65,7 @@ static enum { ICH_FORCE_HPET_RESUME, VT8237_FORCE_HPET_RESUME, NVIDIA_FORCE_HPET_RESUME, + ATI_FORCE_HPET_RESUME, } force_hpet_resume_type; static void __iomem *rcba_base; @@ -330,6 +331,31 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, vt8237_force_enable_hpet); +static void ati_force_hpet_resume(void) +{ + pci_write_config_dword(cached_dev, 0x14, 0xfed00000); + printk(KERN_DEBUG "Force enabled HPET at resume\n"); +} + +static void ati_force_enable_hpet(struct pci_dev *dev) +{ + u32 uninitialized_var(val); + + if (!hpet_force_user || hpet_address || force_hpet_address) + return; + + pci_write_config_dword(dev, 0x14, 0xfed00000); + pci_read_config_dword(dev, 0x14, &val); + force_hpet_address = val; + force_hpet_resume_type = ATI_FORCE_HPET_RESUME; + dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", + force_hpet_address); + cached_dev = dev; + return; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, + ati_force_enable_hpet); + /* * Undocumented chipset feature taken from LinuxBIOS. */ @@ -397,6 +423,9 @@ void force_hpet_resume(void) case NVIDIA_FORCE_HPET_RESUME: nvidia_force_hpet_resume(); return; + case ATI_FORCE_HPET_RESUME: + ati_force_hpet_resume(); + return; default: break; } -- cgit v1.2.3 From 7c4728f4a865067d96fb84f1d9c65e0ccd1f355d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 10 May 2008 21:42:14 +0200 Subject: x86: print info about available HPET quirk We have a lot of HPET quirks available which might force enable HPET even when the BIOS does not enable it. Some of those quirks depend on the command line option "hpet=force". Andrew pointed out that hoping that the user will find out about this boot option is not really helpful. Emit a kernel info which informs the user about the "hpet=force" boot option when we enter a quirk which depends on this option and the user did not provide it. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/quirks.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 5fe6bd5cc4c7..ddbf34d16a01 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -175,6 +175,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, static struct pci_dev *cached_dev; +static void hpet_print_force_info(void) +{ + printk(KERN_INFO "HPET not enabled in BIOS. " + "You might try hpet=force boot option\n"); +} + static void old_ich_force_hpet_resume(void) { u32 val; @@ -254,6 +260,8 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev) { if (hpet_force_user) old_ich_force_enable_hpet(dev); + else + hpet_print_force_info(); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, @@ -291,8 +299,13 @@ static void vt8237_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); return; + } pci_read_config_dword(dev, 0x68, &val); /* @@ -341,8 +354,13 @@ static void ati_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); return; + } pci_write_config_dword(dev, 0x14, 0xfed00000); pci_read_config_dword(dev, 0x14, &val); @@ -369,8 +387,13 @@ static void nvidia_force_enable_hpet(struct pci_dev *dev) { u32 uninitialized_var(val); - if (!hpet_force_user || hpet_address || force_hpet_address) + if (hpet_address || force_hpet_address) + return; + + if (!hpet_force_user) { + hpet_print_force_info(); return; + } pci_write_config_dword(dev, 0x44, 0xfed00001); pci_read_config_dword(dev, 0x44, &val); -- cgit v1.2.3 From 8edc5cc5ec880c96de8e6686fb0d7a5231e91c05 Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Mon, 12 May 2008 15:43:34 +0200 Subject: x86: remove 6 bank limitation in 64 bit MCE reporting code Eliminate the 6 bank restriction in 64 bit mce reporting code. This restriction is artificial (due to static creation of sysfs files) and 32 bit code does not have any such restriction. This change helps in reporting the details of machine checks on a machine check exception with errors in bank 6 and above on CPUs that support those banks. Without the patch, machine check errors in those banks are not reported. We still have 128 (MCE_EXTENDED_BANK) bank restriction instead of max 256 supported in hardware. That is not changed in the patch below as it will have some user level mcelog utility dependency, with bank 128 being used for thermal reporting currently. The patch below does not create sysfs control (bankNctl) for banks higher than 6 as well. That needs some pre-cleanup in /sysfs mce layout, removal of per cpu /sysfs entries for bankctl as they are really global system level control today. That change will follow. This basic change is critical to report the detailed errors on banks higher than 6. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/mce_64.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index e07e8c068ae0..f1f3f5e163b7 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -31,7 +31,7 @@ #include #define MISC_MCELOG_MINOR 227 -#define NR_BANKS 6 +#define NR_SYSFS_BANKS 6 atomic_t mce_entry; @@ -46,7 +46,7 @@ static int mce_dont_init; */ static int tolerant = 1; static int banks; -static unsigned long bank[NR_BANKS] = { [0 ... NR_BANKS-1] = ~0UL }; +static unsigned long bank[NR_SYSFS_BANKS] = { [0 ... NR_SYSFS_BANKS-1] = ~0UL }; static unsigned long notify_user; static int rip_msr; static int mce_bootlog = -1; @@ -209,7 +209,7 @@ void do_machine_check(struct pt_regs * regs, long error_code) barrier(); for (i = 0; i < banks; i++) { - if (!bank[i]) + if (i < NR_SYSFS_BANKS && !bank[i]) continue; m.misc = 0; @@ -444,9 +444,10 @@ static void mce_init(void *dummy) rdmsrl(MSR_IA32_MCG_CAP, cap); banks = cap & 0xff; - if (banks > NR_BANKS) { - printk(KERN_INFO "MCE: warning: using only %d banks\n", banks); - banks = NR_BANKS; + if (banks > MCE_EXTENDED_BANK) { + printk(KERN_INFO "MCE: warning: using only %d banks\n", + MCE_EXTENDED_BANK); + banks = MCE_EXTENDED_BANK; } /* Use accurate RIP reporting if available. */ if ((cap & (1<<9)) && ((cap >> 16) & 0xff) >= 9) @@ -462,7 +463,7 @@ static void mce_init(void *dummy) wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff); for (i = 0; i < banks; i++) { - wrmsrl(MSR_IA32_MC0_CTL+4*i, bank[i]); + wrmsrl(MSR_IA32_MC0_CTL+4*i, ~0UL); wrmsrl(MSR_IA32_MC0_STATUS+4*i, 0); } } @@ -766,7 +767,10 @@ DEFINE_PER_CPU(struct sys_device, device_mce); } \ static SYSDEV_ATTR(name, 0644, show_ ## name, set_ ## name); -/* TBD should generate these dynamically based on number of available banks */ +/* + * TBD should generate these dynamically based on number of available banks. + * Have only 6 contol banks in /sysfs until then. + */ ACCESSOR(bank0ctl,bank[0],mce_restart()) ACCESSOR(bank1ctl,bank[1],mce_restart()) ACCESSOR(bank2ctl,bank[2],mce_restart()) -- cgit v1.2.3 From 1c7d06d419dbe82c76fbb4d3e1fa61b2da2dc00b Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 30 Apr 2008 22:12:05 +0200 Subject: revert: thread_info.h change temporarily revert parts of "signals: x86 TS_RESTORE_SIGMASK". Signed-off-by: Ingo Molnar --- include/asm-x86/thread_info_32.h | 13 ++----------- include/asm-x86/thread_info_64.h | 13 ++----------- 2 files changed, 4 insertions(+), 22 deletions(-) diff --git a/include/asm-x86/thread_info_32.h b/include/asm-x86/thread_info_32.h index b6338829d1a8..531859962096 100644 --- a/include/asm-x86/thread_info_32.h +++ b/include/asm-x86/thread_info_32.h @@ -131,6 +131,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_SYSCALL_EMU 5 /* syscall emulation active */ #define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */ #define TIF_SECCOMP 7 /* secure computing */ +#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */ #define TIF_HRTICK_RESCHED 9 /* reprogram hrtick timer */ #define TIF_MEMDIE 16 #define TIF_DEBUG 17 /* uses debug registers */ @@ -150,6 +151,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) #define _TIF_DEBUG (1 << TIF_DEBUG) #define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) @@ -186,20 +188,9 @@ static inline struct thread_info *current_thread_info(void) this quantum (SMP) */ #define TS_POLLING 0x0002 /* True if in idle loop and not sleeping */ -#define TS_RESTORE_SIGMASK 0x0004 /* restore signal mask in do_signal() */ #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) -#ifndef __ASSEMBLY__ -#define HAVE_SET_RESTORE_SIGMASK 1 -static inline void set_restore_sigmask(void) -{ - struct thread_info *ti = current_thread_info(); - ti->status |= TS_RESTORE_SIGMASK; - set_bit(TIF_SIGPENDING, &ti->flags); -} -#endif /* !__ASSEMBLY__ */ - #endif /* __KERNEL__ */ #endif /* _ASM_THREAD_INFO_H */ diff --git a/include/asm-x86/thread_info_64.h b/include/asm-x86/thread_info_64.h index cb69f70abba1..ed664e874dec 100644 --- a/include/asm-x86/thread_info_64.h +++ b/include/asm-x86/thread_info_64.h @@ -109,6 +109,7 @@ static inline struct thread_info *stack_thread_info(void) #define TIF_IRET 5 /* force IRET */ #define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ #define TIF_SECCOMP 8 /* secure computing */ +#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ #define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ #define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ /* 16 free */ @@ -132,6 +133,7 @@ static inline struct thread_info *stack_thread_info(void) #define _TIF_IRET (1 << TIF_IRET) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) #define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) #define _TIF_IA32 (1 << TIF_IA32) @@ -176,20 +178,9 @@ static inline struct thread_info *stack_thread_info(void) #define TS_COMPAT 0x0002 /* 32bit syscall active */ #define TS_POLLING 0x0004 /* true if in idle loop and not sleeping */ -#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */ #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) -#ifndef __ASSEMBLY__ -#define HAVE_SET_RESTORE_SIGMASK 1 -static inline void set_restore_sigmask(void) -{ - struct thread_info *ti = current_thread_info(); - ti->status |= TS_RESTORE_SIGMASK; - set_bit(TIF_SIGPENDING, &ti->flags); -} -#endif /* !__ASSEMBLY__ */ - #endif /* __KERNEL__ */ #endif /* _ASM_THREAD_INFO_H */ -- cgit v1.2.3 From 2052e8d40ad58b1d364f900e70edfda62caa0874 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 12 May 2008 15:43:41 +0200 Subject: x86: merge thread_info.h Simple merge of both thread_info_32.h and thread_info_64.h into thread_info.h. Comments for #ifndef __ASM_THREAD_INFO_H and #ifdef __KERNEL__ are the same. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar --- include/asm-x86/thread_info.h | 366 ++++++++++++++++++++++++++++++++++++++- include/asm-x86/thread_info_32.h | 196 --------------------- include/asm-x86/thread_info_64.h | 186 -------------------- 3 files changed, 364 insertions(+), 384 deletions(-) delete mode 100644 include/asm-x86/thread_info_32.h delete mode 100644 include/asm-x86/thread_info_64.h diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 77244f17993f..d59384ac0ba6 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -1,10 +1,372 @@ +/* thread_info.h: low-level thread information + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ + #ifndef _ASM_X86_THREAD_INFO_H +#define _ASM_X86_THREAD_INFO_H + #ifdef CONFIG_X86_32 -# include "thread_info_32.h" +#include +#include + +#ifndef __ASSEMBLY__ +#include +#endif + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, + * the assembly constants must also be changed + */ +#ifndef __ASSEMBLY__ + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + unsigned long status; /* thread-synchronous flags */ + __u32 cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, + <0 => BUG */ + mm_segment_t addr_limit; /* thread address space: + 0-0xBFFFFFFF user-thread + 0-0xFFFFFFFF kernel-thread + */ + void *sysenter_return; + struct restart_block restart_block; + unsigned long previous_esp; /* ESP of the previous stack in + case of nested (IRQ) stacks + */ + __u8 supervisor_stack[0]; +}; + +#else /* !__ASSEMBLY__ */ + +#include + +#endif + +#define PREEMPT_ACTIVE 0x10000000 +#ifdef CONFIG_4KSTACKS +#define THREAD_SIZE (4096) #else -# include "thread_info_64.h" +#define THREAD_SIZE (8192) #endif +#define STACK_WARN (THREAD_SIZE/8) +/* + * macros/functions for gaining access to the thread information structure + * + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + + +/* how to get the current stack pointer from C */ +register unsigned long current_stack_pointer asm("esp") __used; + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + return (struct thread_info *) + (current_stack_pointer & ~(THREAD_SIZE - 1)); +} + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(tsk) ((struct thread_info *) \ + __get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(THREAD_SIZE))) +#else +#define alloc_thread_info(tsk) ((struct thread_info *) \ + __get_free_pages(GFP_KERNEL, get_order(THREAD_SIZE))) +#endif + +#else /* !__ASSEMBLY__ */ + +/* how to get the thread information struct from ASM */ +#define GET_THREAD_INFO(reg) \ + movl $-THREAD_SIZE, reg; \ + andl %esp, reg + +/* use this one if reg already contains %esp */ +#define GET_THREAD_INFO_WITH_ESP(reg) \ + andl $-THREAD_SIZE, reg + +#endif + +/* + * thread information flags + * - these are process state flags that various + * assembly files may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_SINGLESTEP 3 /* restore singlestep on return to + user mode */ +#define TIF_IRET 4 /* return with iret */ +#define TIF_SYSCALL_EMU 5 /* syscall emulation active */ +#define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */ +#define TIF_SECCOMP 7 /* secure computing */ +#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */ +#define TIF_HRTICK_RESCHED 9 /* reprogram hrtick timer */ +#define TIF_MEMDIE 16 +#define TIF_DEBUG 17 /* uses debug registers */ +#define TIF_IO_BITMAP 18 /* uses I/O bitmap */ +#define TIF_FREEZE 19 /* is freezing for suspend */ +#define TIF_NOTSC 20 /* TSC is not accessible in userland */ +#define TIF_FORCED_TF 21 /* true if TF in eflags artificially */ +#define TIF_DEBUGCTLMSR 22 /* uses thread_struct.debugctlmsr */ +#define TIF_DS_AREA_MSR 23 /* uses thread_struct.ds_area_msr */ +#define TIF_BTS_TRACE_TS 24 /* record scheduling event timestamps */ + +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) +#define _TIF_IRET (1 << TIF_IRET) +#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) +#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) +#define _TIF_DEBUG (1 << TIF_DEBUG) +#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) +#define _TIF_FREEZE (1 << TIF_FREEZE) +#define _TIF_NOTSC (1 << TIF_NOTSC) +#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) +#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) +#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) +#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) + +/* work to do on interrupt/exception return */ +#define _TIF_WORK_MASK \ + (0x0000FFFF & ~(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ + _TIF_SECCOMP | _TIF_SYSCALL_EMU)) +/* work to do on any return to u-space */ +#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) + +/* flags to check in __switch_to() */ +#define _TIF_WORK_CTXSW \ + (_TIF_IO_BITMAP | _TIF_NOTSC | _TIF_DEBUGCTLMSR | \ + _TIF_DS_AREA_MSR | _TIF_BTS_TRACE_TS) +#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW +#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW | _TIF_DEBUG) + + +/* + * Thread-synchronous status. + * + * This is different from the flags in that nobody else + * ever touches our thread-synchronous status, so we don't + * have to worry about atomic accesses. + */ +#define TS_USEDFPU 0x0001 /* FPU was used by this task + this quantum (SMP) */ +#define TS_POLLING 0x0002 /* True if in idle loop + and not sleeping */ + +#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) + +#else /* X86_32 */ + +#include +#include +#include + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + */ +#ifndef __ASSEMBLY__ +struct task_struct; +struct exec_domain; +#include + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + __u32 flags; /* low level flags */ + __u32 status; /* thread synchronous flags */ + __u32 cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, + <0 => BUG */ + mm_segment_t addr_limit; + struct restart_block restart_block; +#ifdef CONFIG_IA32_EMULATION + void __user *sysenter_return; +#endif +}; +#endif + +/* + * macros/functions for gaining access to the thread information structure + * preempt_count needs to be 1 initially, until the scheduler is functional. + */ +#ifndef __ASSEMBLY__ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; + ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE); + return ti; +} + +/* do not use in interrupt context */ +static inline struct thread_info *stack_thread_info(void) +{ + struct thread_info *ti; + asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1))); + return ti; +} + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO) +#else +#define THREAD_FLAGS GFP_KERNEL +#endif + +#define alloc_thread_info(tsk) \ + ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER)) + +#else /* !__ASSEMBLY__ */ + +/* how to get the thread information struct from ASM */ +#define GET_THREAD_INFO(reg) \ + movq %gs:pda_kernelstack,reg ; \ + subq $(THREAD_SIZE-PDA_STACKOFFSET),reg + +#endif + +/* + * thread information flags + * - these are process state flags that various assembly files + * may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + * Warning: layout of LSW is hardcoded in entry.S + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/ +#define TIF_IRET 5 /* force IRET */ +#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ +#define TIF_SECCOMP 8 /* secure computing */ +#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ +#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ +#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ +/* 16 free */ +#define TIF_IA32 17 /* 32bit process */ +#define TIF_FORK 18 /* ret_from_fork */ +#define TIF_ABI_PENDING 19 +#define TIF_MEMDIE 20 +#define TIF_DEBUG 21 /* uses debug registers */ +#define TIF_IO_BITMAP 22 /* uses I/O bitmap */ +#define TIF_FREEZE 23 /* is freezing for suspend */ +#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */ +#define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */ +#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */ +#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */ +#define TIF_NOTSC 28 /* TSC is not accessible in userland */ + +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_IRET (1 << TIF_IRET) +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) +#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) +#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) +#define _TIF_IA32 (1 << TIF_IA32) +#define _TIF_FORK (1 << TIF_FORK) +#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING) +#define _TIF_DEBUG (1 << TIF_DEBUG) +#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) +#define _TIF_FREEZE (1 << TIF_FREEZE) +#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) +#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) +#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) +#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) +#define _TIF_NOTSC (1 << TIF_NOTSC) + +/* work to do on interrupt/exception return */ +#define _TIF_WORK_MASK \ + (0x0000FFFF & \ + ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP|_TIF_SECCOMP)) +/* work to do on any return to user space */ +#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) + +#define _TIF_DO_NOTIFY_MASK \ + (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED) + +/* flags to check in __switch_to() */ +#define _TIF_WORK_CTXSW \ + (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS|_TIF_NOTSC) +#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW +#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) + +#define PREEMPT_ACTIVE 0x10000000 + +/* + * Thread-synchronous status. + * + * This is different from the flags in that nobody else + * ever touches our thread-synchronous status, so we don't + * have to worry about atomic accesses. + */ +#define TS_USEDFPU 0x0001 /* FPU was used by this task + this quantum (SMP) */ +#define TS_COMPAT 0x0002 /* 32bit syscall active */ +#define TS_POLLING 0x0004 /* true if in idle loop + and not sleeping */ + +#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) + +#endif /* !X86_32 */ + + #ifndef __ASSEMBLY__ extern void arch_task_cache_init(void); extern void free_thread_info(struct thread_info *ti); diff --git a/include/asm-x86/thread_info_32.h b/include/asm-x86/thread_info_32.h deleted file mode 100644 index 531859962096..000000000000 --- a/include/asm-x86/thread_info_32.h +++ /dev/null @@ -1,196 +0,0 @@ -/* thread_info.h: i386 low-level thread information - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#include -#include - -#ifndef __ASSEMBLY__ -#include -#endif - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, - * the assembly constants must also be changed - */ -#ifndef __ASSEMBLY__ - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - unsigned long status; /* thread-synchronous flags */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - mm_segment_t addr_limit; /* thread address space: - 0-0xBFFFFFFF user-thread - 0-0xFFFFFFFF kernel-thread - */ - void *sysenter_return; - struct restart_block restart_block; - unsigned long previous_esp; /* ESP of the previous stack in - case of nested (IRQ) stacks - */ - __u8 supervisor_stack[0]; -}; - -#else /* !__ASSEMBLY__ */ - -#include - -#endif - -#define PREEMPT_ACTIVE 0x10000000 -#ifdef CONFIG_4KSTACKS -#define THREAD_SIZE (4096) -#else -#define THREAD_SIZE (8192) -#endif - -#define STACK_WARN (THREAD_SIZE/8) -/* - * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#ifndef __ASSEMBLY__ - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - - -/* how to get the current stack pointer from C */ -register unsigned long current_stack_pointer asm("esp") __used; - -/* how to get the thread information struct from C */ -static inline struct thread_info *current_thread_info(void) -{ - return (struct thread_info *) - (current_stack_pointer & ~(THREAD_SIZE - 1)); -} - -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(tsk) ((struct thread_info *) \ - __get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(THREAD_SIZE))) -#else -#define alloc_thread_info(tsk) ((struct thread_info *) \ - __get_free_pages(GFP_KERNEL, get_order(THREAD_SIZE))) -#endif - -#else /* !__ASSEMBLY__ */ - -/* how to get the thread information struct from ASM */ -#define GET_THREAD_INFO(reg) \ - movl $-THREAD_SIZE, reg; \ - andl %esp, reg - -/* use this one if reg already contains %esp */ -#define GET_THREAD_INFO_WITH_ESP(reg) \ - andl $-THREAD_SIZE, reg - -#endif - -/* - * thread information flags - * - these are process state flags that various - * assembly files may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_SINGLESTEP 3 /* restore singlestep on return to - user mode */ -#define TIF_IRET 4 /* return with iret */ -#define TIF_SYSCALL_EMU 5 /* syscall emulation active */ -#define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */ -#define TIF_SECCOMP 7 /* secure computing */ -#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */ -#define TIF_HRTICK_RESCHED 9 /* reprogram hrtick timer */ -#define TIF_MEMDIE 16 -#define TIF_DEBUG 17 /* uses debug registers */ -#define TIF_IO_BITMAP 18 /* uses I/O bitmap */ -#define TIF_FREEZE 19 /* is freezing for suspend */ -#define TIF_NOTSC 20 /* TSC is not accessible in userland */ -#define TIF_FORCED_TF 21 /* true if TF in eflags artificially */ -#define TIF_DEBUGCTLMSR 22 /* uses thread_struct.debugctlmsr */ -#define TIF_DS_AREA_MSR 23 /* uses thread_struct.ds_area_msr */ -#define TIF_BTS_TRACE_TS 24 /* record scheduling event timestamps */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_IRET (1 << TIF_IRET) -#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) -#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) -#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) -#define _TIF_DEBUG (1 << TIF_DEBUG) -#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) -#define _TIF_FREEZE (1 << TIF_FREEZE) -#define _TIF_NOTSC (1 << TIF_NOTSC) -#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) -#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) -#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) -#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) - -/* work to do on interrupt/exception return */ -#define _TIF_WORK_MASK \ - (0x0000FFFF & ~(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SECCOMP | _TIF_SYSCALL_EMU)) -/* work to do on any return to u-space */ -#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) - -/* flags to check in __switch_to() */ -#define _TIF_WORK_CTXSW \ - (_TIF_IO_BITMAP | _TIF_NOTSC | _TIF_DEBUGCTLMSR | \ - _TIF_DS_AREA_MSR | _TIF_BTS_TRACE_TS) -#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW -#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW | _TIF_DEBUG) - - -/* - * Thread-synchronous status. - * - * This is different from the flags in that nobody else - * ever touches our thread-synchronous status, so we don't - * have to worry about atomic accesses. - */ -#define TS_USEDFPU 0x0001 /* FPU was used by this task - this quantum (SMP) */ -#define TS_POLLING 0x0002 /* True if in idle loop - and not sleeping */ - -#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ diff --git a/include/asm-x86/thread_info_64.h b/include/asm-x86/thread_info_64.h deleted file mode 100644 index ed664e874dec..000000000000 --- a/include/asm-x86/thread_info_64.h +++ /dev/null @@ -1,186 +0,0 @@ -/* thread_info.h: x86_64 low-level thread information - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#include -#include -#include - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - */ -#ifndef __ASSEMBLY__ -struct task_struct; -struct exec_domain; -#include - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - __u32 flags; /* low level flags */ - __u32 status; /* thread synchronous flags */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - mm_segment_t addr_limit; - struct restart_block restart_block; -#ifdef CONFIG_IA32_EMULATION - void __user *sysenter_return; -#endif -}; -#endif - -/* - * macros/functions for gaining access to the thread information structure - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#ifndef __ASSEMBLY__ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE); - return ti; -} - -/* do not use in interrupt context */ -static inline struct thread_info *stack_thread_info(void) -{ - struct thread_info *ti; - asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1))); - return ti; -} - -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO) -#else -#define THREAD_FLAGS GFP_KERNEL -#endif - -#define alloc_thread_info(tsk) \ - ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER)) - -#else /* !__ASSEMBLY__ */ - -/* how to get the thread information struct from ASM */ -#define GET_THREAD_INFO(reg) \ - movq %gs:pda_kernelstack,reg ; \ - subq $(THREAD_SIZE-PDA_STACKOFFSET),reg - -#endif - -/* - * thread information flags - * - these are process state flags that various assembly files - * may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - * Warning: layout of LSW is hardcoded in entry.S - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/ -#define TIF_IRET 5 /* force IRET */ -#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ -#define TIF_SECCOMP 8 /* secure computing */ -#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ -#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ -#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ -/* 16 free */ -#define TIF_IA32 17 /* 32bit process */ -#define TIF_FORK 18 /* ret_from_fork */ -#define TIF_ABI_PENDING 19 -#define TIF_MEMDIE 20 -#define TIF_DEBUG 21 /* uses debug registers */ -#define TIF_IO_BITMAP 22 /* uses I/O bitmap */ -#define TIF_FREEZE 23 /* is freezing for suspend */ -#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */ -#define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */ -#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */ -#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */ -#define TIF_NOTSC 28 /* TSC is not accessible in userland */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_IRET (1 << TIF_IRET) -#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) -#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) -#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) -#define _TIF_IA32 (1 << TIF_IA32) -#define _TIF_FORK (1 << TIF_FORK) -#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING) -#define _TIF_DEBUG (1 << TIF_DEBUG) -#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) -#define _TIF_FREEZE (1 << TIF_FREEZE) -#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) -#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) -#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) -#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) -#define _TIF_NOTSC (1 << TIF_NOTSC) - -/* work to do on interrupt/exception return */ -#define _TIF_WORK_MASK \ - (0x0000FFFF & \ - ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP|_TIF_SECCOMP)) -/* work to do on any return to user space */ -#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) - -#define _TIF_DO_NOTIFY_MASK \ - (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED) - -/* flags to check in __switch_to() */ -#define _TIF_WORK_CTXSW \ - (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS|_TIF_NOTSC) -#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW -#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) - -#define PREEMPT_ACTIVE 0x10000000 - -/* - * Thread-synchronous status. - * - * This is different from the flags in that nobody else - * ever touches our thread-synchronous status, so we don't - * have to worry about atomic accesses. - */ -#define TS_USEDFPU 0x0001 /* FPU was used by this task - this quantum (SMP) */ -#define TS_COMPAT 0x0002 /* 32bit syscall active */ -#define TS_POLLING 0x0004 /* true if in idle loop - and not sleeping */ - -#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ -- cgit v1.2.3 From 12a638e13c68bbe187782518dab375f4fa800fc4 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:33 -0700 Subject: x86: threadinfo: common include files Move shared includes to a common area in thread_info.h Adds asm/types.h for x86_64 and linux/compiler.h for x86_32. Not needed but we can avoid some ifdeffing and it simplifies later joining. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index d59384ac0ba6..d2dc1a3b5d65 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -7,9 +7,11 @@ #ifndef _ASM_X86_THREAD_INFO_H #define _ASM_X86_THREAD_INFO_H -#ifdef CONFIG_X86_32 #include #include +#include + +#ifdef CONFIG_X86_32 #ifndef __ASSEMBLY__ #include @@ -192,8 +194,6 @@ static inline struct thread_info *current_thread_info(void) #else /* X86_32 */ -#include -#include #include /* -- cgit v1.2.3 From f2ea3b1d4d7ab66d86da57899993282f3deb1f74 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:34 -0700 Subject: x86: threadinfo: merge thread sync state definitions Merge both. x86_64 has an additional TS_COMPAT that is harmless for 32 bit. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 22 +++------------------- 1 file changed, 3 insertions(+), 19 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index d2dc1a3b5d65..4b91f59de8fc 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -177,21 +177,6 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW | _TIF_DEBUG) - -/* - * Thread-synchronous status. - * - * This is different from the flags in that nobody else - * ever touches our thread-synchronous status, so we don't - * have to worry about atomic accesses. - */ -#define TS_USEDFPU 0x0001 /* FPU was used by this task - this quantum (SMP) */ -#define TS_POLLING 0x0002 /* True if in idle loop - and not sleeping */ - -#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) - #else /* X86_32 */ #include @@ -349,6 +334,8 @@ static inline struct thread_info *stack_thread_info(void) #define PREEMPT_ACTIVE 0x10000000 +#endif /* !X86_32 */ + /* * Thread-synchronous status. * @@ -358,15 +345,12 @@ static inline struct thread_info *stack_thread_info(void) */ #define TS_USEDFPU 0x0001 /* FPU was used by this task this quantum (SMP) */ -#define TS_COMPAT 0x0002 /* 32bit syscall active */ +#define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/ #define TS_POLLING 0x0004 /* true if in idle loop and not sleeping */ #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) -#endif /* !X86_32 */ - - #ifndef __ASSEMBLY__ extern void arch_task_cache_init(void); extern void free_thread_info(struct thread_info *ti); -- cgit v1.2.3 From 006c484bb3d9547e82a33a09668c9b54b912c8fb Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:35 -0700 Subject: x86: common thread_info definitions Merge the thread_info definition into one structure definition for both arches. The __u32 is equal to unsigned long for 32 bit. sysenter_return is used both for the IA32 emulation for 64 and x86_32. Avoid complicated #ifdef by simply always including it. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 55 ++++++++++--------------------------------- 1 file changed, 12 insertions(+), 43 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 4b91f59de8fc..71b0880d80b5 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -11,47 +11,42 @@ #include #include -#ifdef CONFIG_X86_32 - -#ifndef __ASSEMBLY__ -#include -#endif - /* * low level task data that entry.S needs immediate access to * - this struct should fit entirely inside of one cache line * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, - * the assembly constants must also be changed */ #ifndef __ASSEMBLY__ +struct task_struct; +struct exec_domain; +#include struct thread_info { struct task_struct *task; /* main task structure */ struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - unsigned long status; /* thread-synchronous flags */ + __u32 flags; /* low level flags */ + __u32 status; /* thread synchronous flags */ __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, + int preempt_count; /* 0 => preemptable, <0 => BUG */ - mm_segment_t addr_limit; /* thread address space: - 0-0xBFFFFFFF user-thread - 0-0xFFFFFFFF kernel-thread - */ - void *sysenter_return; + mm_segment_t addr_limit; struct restart_block restart_block; + void __user *sysenter_return; +#ifdef CONFIG_X86_32 unsigned long previous_esp; /* ESP of the previous stack in case of nested (IRQ) stacks */ __u8 supervisor_stack[0]; +#endif }; - #else /* !__ASSEMBLY__ */ #include #endif +#ifdef CONFIG_X86_32 + #define PREEMPT_ACTIVE 0x10000000 #ifdef CONFIG_4KSTACKS #define THREAD_SIZE (4096) @@ -181,32 +176,6 @@ static inline struct thread_info *current_thread_info(void) #include -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - */ -#ifndef __ASSEMBLY__ -struct task_struct; -struct exec_domain; -#include - -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - __u32 flags; /* low level flags */ - __u32 status; /* thread synchronous flags */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - mm_segment_t addr_limit; - struct restart_block restart_block; -#ifdef CONFIG_IA32_EMULATION - void __user *sysenter_return; -#endif -}; -#endif - /* * macros/functions for gaining access to the thread information structure * preempt_count needs to be 1 initially, until the scheduler is functional. -- cgit v1.2.3 From 3351cc03c0762353225a79507e38db4c1e656d52 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:36 -0700 Subject: x86: threadinfo: merge INIT_THREAD_INFO Both definitions are the same. So move to common x86 area. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 49 +++++++++++++++---------------------------- 1 file changed, 17 insertions(+), 32 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 71b0880d80b5..8cd52d4bfb0e 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -39,6 +39,23 @@ struct thread_info { __u8 supervisor_stack[0]; #endif }; + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + #else /* !__ASSEMBLY__ */ #include @@ -62,22 +79,6 @@ struct thread_info { */ #ifndef __ASSEMBLY__ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - /* how to get the current stack pointer from C */ register unsigned long current_stack_pointer asm("esp") __used; @@ -181,22 +182,6 @@ static inline struct thread_info *current_thread_info(void) * preempt_count needs to be 1 initially, until the scheduler is functional. */ #ifndef __ASSEMBLY__ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .addr_limit = KERNEL_DS, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; -- cgit v1.2.3 From 24e2de6e28a453cd114b06215df2f9931cd0c342 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:37 -0700 Subject: x86: thread_info: PREEMPT_ACTIVE Same for both 32 and 64 bit so simply put it in to the common area. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 8cd52d4bfb0e..f8d5cf516ac4 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -62,9 +62,10 @@ struct thread_info { #endif +#define PREEMPT_ACTIVE 0x10000000 + #ifdef CONFIG_X86_32 -#define PREEMPT_ACTIVE 0x10000000 #ifdef CONFIG_4KSTACKS #define THREAD_SIZE (4096) #else @@ -286,8 +287,6 @@ static inline struct thread_info *stack_thread_info(void) #define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) -#define PREEMPT_ACTIVE 0x10000000 - #endif /* !X86_32 */ /* -- cgit v1.2.3 From e57549b017552f7a493b366f5ccd4781801083e4 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:38 -0700 Subject: x86: thread_info: merge TIF_ flags. Both TIF lists are essentially the same. x86_32 also has TIF_SYSCALL_EMU which must be undefined for the 64 bit case. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 162 ++++++++++++++++-------------------------- 1 file changed, 61 insertions(+), 101 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index f8d5cf516ac4..983743a14b99 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -62,6 +62,67 @@ struct thread_info { #endif +/* + * thread information flags + * - these are process state flags that various assembly files + * may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + * Warning: layout of LSW is hardcoded in entry.S + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/ +#define TIF_IRET 5 /* force IRET */ +#ifdef CONFIG_X86_32 +#define TIF_SYSCALL_EMU 6 /* syscall emulation active */ +#endif +#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ +#define TIF_SECCOMP 8 /* secure computing */ +#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ +#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ +#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ +#define TIF_NOTSC 16 /* TSC is not accessible in userland */ +#define TIF_IA32 17 /* 32bit process */ +#define TIF_FORK 18 /* ret_from_fork */ +#define TIF_ABI_PENDING 19 +#define TIF_MEMDIE 20 +#define TIF_DEBUG 21 /* uses debug registers */ +#define TIF_IO_BITMAP 22 /* uses I/O bitmap */ +#define TIF_FREEZE 23 /* is freezing for suspend */ +#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */ +#define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */ +#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */ +#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */ + +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_IRET (1 << TIF_IRET) +#ifdef CONFIG_X86_32 +#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) +#else +#define _TIF_SYSCALL_EMU 0 +#endif +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) +#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) +#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) +#define _TIF_NOTSC (1 << TIF_NOTSC) +#define _TIF_IA32 (1 << TIF_IA32) +#define _TIF_FORK (1 << TIF_FORK) +#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING) +#define _TIF_DEBUG (1 << TIF_DEBUG) +#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) +#define _TIF_FREEZE (1 << TIF_FREEZE) +#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) +#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) +#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) +#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) + #define PREEMPT_ACTIVE 0x10000000 #ifdef CONFIG_X86_32 @@ -113,53 +174,6 @@ static inline struct thread_info *current_thread_info(void) #endif -/* - * thread information flags - * - these are process state flags that various - * assembly files may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_SINGLESTEP 3 /* restore singlestep on return to - user mode */ -#define TIF_IRET 4 /* return with iret */ -#define TIF_SYSCALL_EMU 5 /* syscall emulation active */ -#define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */ -#define TIF_SECCOMP 7 /* secure computing */ -#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */ -#define TIF_HRTICK_RESCHED 9 /* reprogram hrtick timer */ -#define TIF_MEMDIE 16 -#define TIF_DEBUG 17 /* uses debug registers */ -#define TIF_IO_BITMAP 18 /* uses I/O bitmap */ -#define TIF_FREEZE 19 /* is freezing for suspend */ -#define TIF_NOTSC 20 /* TSC is not accessible in userland */ -#define TIF_FORCED_TF 21 /* true if TF in eflags artificially */ -#define TIF_DEBUGCTLMSR 22 /* uses thread_struct.debugctlmsr */ -#define TIF_DS_AREA_MSR 23 /* uses thread_struct.ds_area_msr */ -#define TIF_BTS_TRACE_TS 24 /* record scheduling event timestamps */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_IRET (1 << TIF_IRET) -#define _TIF_SYSCALL_EMU (1 << TIF_SYSCALL_EMU) -#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) -#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) -#define _TIF_DEBUG (1 << TIF_DEBUG) -#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) -#define _TIF_FREEZE (1 << TIF_FREEZE) -#define _TIF_NOTSC (1 << TIF_NOTSC) -#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) -#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) -#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) -#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) - /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK \ (0x0000FFFF & ~(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ @@ -217,60 +231,6 @@ static inline struct thread_info *stack_thread_info(void) #endif -/* - * thread information flags - * - these are process state flags that various assembly files - * may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - * Warning: layout of LSW is hardcoded in entry.S - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_SINGLESTEP 4 /* reenable singlestep on user return*/ -#define TIF_IRET 5 /* force IRET */ -#define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ -#define TIF_SECCOMP 8 /* secure computing */ -#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ -#define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ -#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ -/* 16 free */ -#define TIF_IA32 17 /* 32bit process */ -#define TIF_FORK 18 /* ret_from_fork */ -#define TIF_ABI_PENDING 19 -#define TIF_MEMDIE 20 -#define TIF_DEBUG 21 /* uses debug registers */ -#define TIF_IO_BITMAP 22 /* uses I/O bitmap */ -#define TIF_FREEZE 23 /* is freezing for suspend */ -#define TIF_FORCED_TF 24 /* true if TF in eflags artificially */ -#define TIF_DEBUGCTLMSR 25 /* uses thread_struct.debugctlmsr */ -#define TIF_DS_AREA_MSR 26 /* uses thread_struct.ds_area_msr */ -#define TIF_BTS_TRACE_TS 27 /* record scheduling event timestamps */ -#define TIF_NOTSC 28 /* TSC is not accessible in userland */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_IRET (1 << TIF_IRET) -#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) -#define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) -#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) -#define _TIF_IA32 (1 << TIF_IA32) -#define _TIF_FORK (1 << TIF_FORK) -#define _TIF_ABI_PENDING (1 << TIF_ABI_PENDING) -#define _TIF_DEBUG (1 << TIF_DEBUG) -#define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) -#define _TIF_FREEZE (1 << TIF_FREEZE) -#define _TIF_FORCED_TF (1 << TIF_FORCED_TF) -#define _TIF_DEBUGCTLMSR (1 << TIF_DEBUGCTLMSR) -#define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) -#define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) -#define _TIF_NOTSC (1 << TIF_NOTSC) - /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK \ (0x0000FFFF & \ -- cgit v1.2.3 From 00c1bb133cf351fa3904b00a48a9cf535d018de6 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:39 -0700 Subject: x86: thread_info: merge tif masks The TIF masks are basically the same. x86_32 also has _TIF_SYSCALL_EMU which is zero for the 64 bit case. The tif masks become the same. x86_64 has an additional _TIF_DONOTIFY_MASK. Does not hurt for the 32 bit case since it is only used in x86_64 arch code. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 51 ++++++++++++++++++------------------------- 1 file changed, 21 insertions(+), 30 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 983743a14b99..b7cd41308e56 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -123,6 +123,27 @@ struct thread_info { #define _TIF_DS_AREA_MSR (1 << TIF_DS_AREA_MSR) #define _TIF_BTS_TRACE_TS (1 << TIF_BTS_TRACE_TS) +/* work to do on interrupt/exception return */ +#define _TIF_WORK_MASK \ + (0x0000FFFF & \ + ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP| \ + _TIF_SECCOMP|_TIF_SYSCALL_EMU)) + +/* work to do on any return to user space */ +#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) + +#define _TIF_DO_NOTIFY_MASK \ + (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED) + +/* flags to check in __switch_to() */ +#define _TIF_WORK_CTXSW \ + (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS| \ + _TIF_NOTSC) + +#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW +#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) + + #define PREEMPT_ACTIVE 0x10000000 #ifdef CONFIG_X86_32 @@ -174,20 +195,6 @@ static inline struct thread_info *current_thread_info(void) #endif -/* work to do on interrupt/exception return */ -#define _TIF_WORK_MASK \ - (0x0000FFFF & ~(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SECCOMP | _TIF_SYSCALL_EMU)) -/* work to do on any return to u-space */ -#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) - -/* flags to check in __switch_to() */ -#define _TIF_WORK_CTXSW \ - (_TIF_IO_BITMAP | _TIF_NOTSC | _TIF_DEBUGCTLMSR | \ - _TIF_DS_AREA_MSR | _TIF_BTS_TRACE_TS) -#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW -#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW | _TIF_DEBUG) - #else /* X86_32 */ #include @@ -231,22 +238,6 @@ static inline struct thread_info *stack_thread_info(void) #endif -/* work to do on interrupt/exception return */ -#define _TIF_WORK_MASK \ - (0x0000FFFF & \ - ~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP|_TIF_SECCOMP)) -/* work to do on any return to user space */ -#define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) - -#define _TIF_DO_NOTIFY_MASK \ - (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED) - -/* flags to check in __switch_to() */ -#define _TIF_WORK_CTXSW \ - (_TIF_IO_BITMAP|_TIF_DEBUGCTLMSR|_TIF_DS_AREA_MSR|_TIF_BTS_TRACE_TS|_TIF_NOTSC) -#define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW -#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) - #endif /* !X86_32 */ /* -- cgit v1.2.3 From b84200b3a0fafa167185201319940d8df62a8c7b Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Mon, 28 Apr 2008 18:52:40 -0700 Subject: x86: thread_info: merge thread_info allocation Make them similar so that both use THREAD_ORDER and THREAD_FLAGS and have a THREAD_SIZE definition that is setup in asm/page_xx.h Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/page_32.h | 8 ++++++++ include/asm-x86/thread_info.h | 37 +++++++++++-------------------------- 2 files changed, 19 insertions(+), 26 deletions(-) diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h index 424e82f8ae27..50b33ebcf851 100644 --- a/include/asm-x86/page_32.h +++ b/include/asm-x86/page_32.h @@ -13,6 +13,14 @@ */ #define __PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL) +#ifdef CONFIG_4KSTACKS +#define THREAD_ORDER 0 +#else +#define THREAD_ORDER 1 +#endif +#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER) + + #ifdef CONFIG_X86_PAE #define __PHYSICAL_MASK_SHIFT 36 #define __VIRTUAL_MASK_SHIFT 32 diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index b7cd41308e56..348f0e0faa3b 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -132,6 +132,7 @@ struct thread_info { /* work to do on any return to user space */ #define _TIF_ALLWORK_MASK (0x0000FFFF & ~_TIF_SECCOMP) +/* Only used for 64 bit */ #define _TIF_DO_NOTIFY_MASK \ (_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED) @@ -143,18 +144,21 @@ struct thread_info { #define _TIF_WORK_CTXSW_PREV _TIF_WORK_CTXSW #define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW|_TIF_DEBUG) - #define PREEMPT_ACTIVE 0x10000000 -#ifdef CONFIG_X86_32 - -#ifdef CONFIG_4KSTACKS -#define THREAD_SIZE (4096) +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO) #else -#define THREAD_SIZE (8192) +#define THREAD_FLAGS GFP_KERNEL #endif -#define STACK_WARN (THREAD_SIZE/8) +#define alloc_thread_info(tsk) \ + ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER)) + +#ifdef CONFIG_X86_32 + +#define STACK_WARN (THREAD_SIZE/8) /* * macros/functions for gaining access to the thread information structure * @@ -173,15 +177,6 @@ static inline struct thread_info *current_thread_info(void) (current_stack_pointer & ~(THREAD_SIZE - 1)); } -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(tsk) ((struct thread_info *) \ - __get_free_pages(GFP_KERNEL | __GFP_ZERO, get_order(THREAD_SIZE))) -#else -#define alloc_thread_info(tsk) ((struct thread_info *) \ - __get_free_pages(GFP_KERNEL, get_order(THREAD_SIZE))) -#endif - #else /* !__ASSEMBLY__ */ /* how to get the thread information struct from ASM */ @@ -219,16 +214,6 @@ static inline struct thread_info *stack_thread_info(void) return ti; } -/* thread information allocation */ -#ifdef CONFIG_DEBUG_STACK_USAGE -#define THREAD_FLAGS (GFP_KERNEL | __GFP_ZERO) -#else -#define THREAD_FLAGS GFP_KERNEL -#endif - -#define alloc_thread_info(tsk) \ - ((struct thread_info *)__get_free_pages(THREAD_FLAGS, THREAD_ORDER)) - #else /* !__ASSEMBLY__ */ /* how to get the thread information struct from ASM */ -- cgit v1.2.3 From 8a6c160a2a13d82c75a50af7282b906cce948df5 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 30 Apr 2008 22:13:44 +0200 Subject: x86: redo thread_info.h change redo Roland's "signals: x86 TS_RESTORE_SIGMASK" ontop of the unified thread_info.h file. Signed-off-by: Ingo Molnar --- include/asm-x86/thread_info.h | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 348f0e0faa3b..74481b72ae0f 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -80,7 +80,6 @@ struct thread_info { #endif #define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ #define TIF_SECCOMP 8 /* secure computing */ -#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ #define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ #define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ #define TIF_NOTSC 16 /* TSC is not accessible in userland */ @@ -108,7 +107,6 @@ struct thread_info { #endif #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) #define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) #define _TIF_NOTSC (1 << TIF_NOTSC) @@ -237,9 +235,20 @@ static inline struct thread_info *stack_thread_info(void) #define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/ #define TS_POLLING 0x0004 /* true if in idle loop and not sleeping */ +#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */ #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) +#ifndef __ASSEMBLY__ +#define HAVE_SET_RESTORE_SIGMASK 1 +static inline void set_restore_sigmask(void) +{ + struct thread_info *ti = current_thread_info(); + ti->status |= TS_RESTORE_SIGMASK; + set_bit(TIF_SIGPENDING, &ti->flags); +} +#endif /* !__ASSEMBLY__ */ + #ifndef __ASSEMBLY__ extern void arch_task_cache_init(void); extern void free_thread_info(struct thread_info *ti); -- cgit v1.2.3 From 41b3eae669fb1ef6ae4acaa937b4e4617a1aa078 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 22 Apr 2008 16:29:26 +0100 Subject: x86: minor polishing to top-level arch Makefile Use build target when creating compatibility link, and use $(boot) where possible. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar --- arch/x86/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 3cff3c894cf3..5df0d1e330b1 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -210,12 +210,12 @@ all: bzImage # KBUILD_IMAGE specify target image being built KBUILD_IMAGE := $(boot)/bzImage -zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage +zImage zlilo zdisk: KBUILD_IMAGE := $(boot)/zImage zImage bzImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE) $(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot - $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage + $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@ compressed: zImage -- cgit v1.2.3 From 6859a8402945cf1d74af75a2e1aa4e327a506ab4 Mon Sep 17 00:00:00 2001 From: Alan Mayer Date: Wed, 26 Mar 2008 16:11:31 -0500 Subject: x86: resize NR_IRQS for large machines On machines with very large numbers of cpus, tables that are dimensioned by NR_IRQS get very large, especially the irq_desc table. They are also very sparsely used. When the cpu count is > MAX_IO_APICS, use MAX_IO_APICS to set NR_IRQS, otherwise use NR_CPUS. Signed-off-by: Alan Mayer Reviewed-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/irq_64.h | 6 ++++++ include/linux/kernel_stat.h | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/include/asm-x86/irq_64.h b/include/asm-x86/irq_64.h index 083d35a62c94..7608176590b6 100644 --- a/include/asm-x86/irq_64.h +++ b/include/asm-x86/irq_64.h @@ -10,6 +10,8 @@ * */ +#include + #define TIMER_IRQ 0 /* @@ -31,7 +33,11 @@ #define FIRST_SYSTEM_VECTOR 0xef /* duplicated in hw_irq.h */ +#if NR_CPUS < MAX_IO_APICS #define NR_IRQS (NR_VECTORS + (32 * NR_CPUS)) +#else +#define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) +#endif #define NR_IRQ_VECTORS NR_IRQS static inline int irq_canonicalize(int irq) diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h index e8ffce898bf9..cf9f40a91c9c 100644 --- a/include/linux/kernel_stat.h +++ b/include/linux/kernel_stat.h @@ -1,11 +1,11 @@ #ifndef _LINUX_KERNEL_STAT_H #define _LINUX_KERNEL_STAT_H -#include #include #include #include #include +#include #include /* -- cgit v1.2.3 From 2e0884362d1fe36ef2d673d763d6ce35e2044e66 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 19:00:30 +0200 Subject: x86: move common declarations to hw_irq.h Move the common declarations from hw_irq_32/64 into hw_irq.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/asm-x86/hw_irq.h | 81 +++++++++++++++++++++++++++++++++++++++++++++ include/asm-x86/hw_irq_32.h | 61 ---------------------------------- include/asm-x86/hw_irq_64.h | 68 ------------------------------------- 3 files changed, 81 insertions(+), 129 deletions(-) diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h index bf025399d939..38af08ed43cf 100644 --- a/include/asm-x86/hw_irq.h +++ b/include/asm-x86/hw_irq.h @@ -1,5 +1,86 @@ +#ifndef _ASM_HW_IRQ_H +#define _ASM_HW_IRQ_H + +/* + * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar + * + * moved some of the old arch/i386/kernel/irq.h to here. VY + * + * IRQ/IPI changes taken from work by Thomas Radke + * + * + * hacked by Andi Kleen for x86-64. + * unified by tglx + */ + +#define NMI_VECTOR 0x02 + +#ifndef __ASSEMBLY__ + +#include +#include +#include + +#include +#include +#include + +#define platform_legacy_irq(irq) ((irq) < 16) + +/* Interrupt handlers registered during init_IRQ */ +extern void apic_timer_interrupt(void); +extern void error_interrupt(void); +extern void spurious_interrupt(void); +extern void thermal_interrupt(void); +extern void reschedule_interrupt(void); + +extern void invalidate_interrupt(void); +extern void invalidate_interrupt0(void); +extern void invalidate_interrupt1(void); +extern void invalidate_interrupt2(void); +extern void invalidate_interrupt3(void); +extern void invalidate_interrupt4(void); +extern void invalidate_interrupt5(void); +extern void invalidate_interrupt6(void); +extern void invalidate_interrupt7(void); + +extern void irq_move_cleanup_interrupt(void); +extern void threshold_interrupt(void); + +extern void call_function_interrupt(void); + +/* PIC specific functions */ +extern void disable_8259A_irq(unsigned int irq); +extern void enable_8259A_irq(unsigned int irq); +extern int i8259A_irq_pending(unsigned int irq); +extern void make_8259A_irq(unsigned int irq); +extern void init_8259A(int aeoi); + +/* IOAPIC */ +#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs)) +extern unsigned long io_apic_irqs; + +extern void init_VISWS_APIC_irqs(void); +extern void setup_IO_APIC(void); +extern void disable_IO_APIC(void); +extern void print_IO_APIC(void); +extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); +extern void setup_ioapic_dest(void); + +/* IPI functions */ +extern void send_IPI_self(int vector); +extern void send_IPI(int dest, int vector); + +/* Statistics */ +extern atomic_t irq_err_count; +extern atomic_t irq_mis_count; + +#endif /* !ASSEMBLY_ */ + #ifdef CONFIG_X86_32 # include "hw_irq_32.h" #else # include "hw_irq_64.h" #endif + +#endif diff --git a/include/asm-x86/hw_irq_32.h b/include/asm-x86/hw_irq_32.h index ea88054e03f3..89fca5af5958 100644 --- a/include/asm-x86/hw_irq_32.h +++ b/include/asm-x86/hw_irq_32.h @@ -1,66 +1,5 @@ -#ifndef _ASM_HW_IRQ_H -#define _ASM_HW_IRQ_H - -/* - * linux/include/asm/hw_irq.h - * - * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar - * - * moved some of the old arch/i386/kernel/irq.h to here. VY - * - * IRQ/IPI changes taken from work by Thomas Radke - * - */ - -#include -#include -#include -#include - -#define NMI_VECTOR 0x02 - -/* - * Various low-level irq details needed by irq.c, process.c, - * time.c, io_apic.c and smp.c - * - * Interrupt entry/exit code at both C and assembly level - */ extern void (*const interrupt[NR_IRQS])(void); -#ifdef CONFIG_SMP -void reschedule_interrupt(void); -void invalidate_interrupt(void); -void call_function_interrupt(void); -#endif - -#ifdef CONFIG_X86_LOCAL_APIC -void apic_timer_interrupt(void); -void error_interrupt(void); -void spurious_interrupt(void); -void thermal_interrupt(void); -#define platform_legacy_irq(irq) ((irq) < 16) -#endif - -void disable_8259A_irq(unsigned int irq); -void enable_8259A_irq(unsigned int irq); -int i8259A_irq_pending(unsigned int irq); -void make_8259A_irq(unsigned int irq); -void init_8259A(int aeoi); -void send_IPI_self(int vector); -void init_VISWS_APIC_irqs(void); -void setup_IO_APIC(void); -void disable_IO_APIC(void); -void print_IO_APIC(void); -int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); -void send_IPI(int dest, int vector); -void setup_ioapic_dest(void); - -extern unsigned long io_apic_irqs; - -extern atomic_t irq_err_count; -extern atomic_t irq_mis_count; -#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs)) -#endif /* _ASM_HW_IRQ_H */ diff --git a/include/asm-x86/hw_irq_64.h b/include/asm-x86/hw_irq_64.h index 0062ef390f67..28674576e9fe 100644 --- a/include/asm-x86/hw_irq_64.h +++ b/include/asm-x86/hw_irq_64.h @@ -1,28 +1,3 @@ -#ifndef _ASM_HW_IRQ_H -#define _ASM_HW_IRQ_H - -/* - * linux/include/asm/hw_irq.h - * - * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar - * - * moved some of the old arch/i386/kernel/irq.h to here. VY - * - * IRQ/IPI changes taken from work by Thomas Radke - * - * - * hacked by Andi Kleen for x86-64. - */ - -#ifndef __ASSEMBLY__ -#include -#include -#include -#include -#include -#endif - -#define NMI_VECTOR 0x02 /* * IDT vectors usable for external interrupt sources start * at 0x20: @@ -96,25 +71,6 @@ #ifndef __ASSEMBLY__ -/* Interrupt handlers registered during init_IRQ */ -void apic_timer_interrupt(void); -void spurious_interrupt(void); -void error_interrupt(void); -void reschedule_interrupt(void); -void call_function_interrupt(void); -void irq_move_cleanup_interrupt(void); -void invalidate_interrupt0(void); -void invalidate_interrupt1(void); -void invalidate_interrupt2(void); -void invalidate_interrupt3(void); -void invalidate_interrupt4(void); -void invalidate_interrupt5(void); -void invalidate_interrupt6(void); -void invalidate_interrupt7(void); -void thermal_interrupt(void); -void threshold_interrupt(void); -void i8254_timer_resume(void); - typedef int vector_irq_t[NR_VECTORS]; DECLARE_PER_CPU(vector_irq_t, vector_irq); extern void __setup_vector_irq(int cpu); @@ -127,29 +83,9 @@ extern spinlock_t vector_lock; * Interrupt entry/exit code at both C and assembly level */ -extern void disable_8259A_irq(unsigned int irq); -extern void enable_8259A_irq(unsigned int irq); -extern int i8259A_irq_pending(unsigned int irq); -extern void make_8259A_irq(unsigned int irq); -extern void init_8259A(int aeoi); -extern void send_IPI_self(int vector); -extern void init_VISWS_APIC_irqs(void); -extern void setup_IO_APIC(void); extern void enable_IO_APIC(void); -extern void disable_IO_APIC(void); -extern void print_IO_APIC(void); -extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); -extern void send_IPI(int dest, int vector); -extern void setup_ioapic_dest(void); extern void native_init_IRQ(void); -extern unsigned long io_apic_irqs; - -extern atomic_t irq_err_count; -extern atomic_t irq_mis_count; - -#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs)) - #include #define IRQ_NAME2(nr) nr##_interrupt(void) @@ -166,8 +102,4 @@ extern atomic_t irq_mis_count; "push $~(" #nr ") ; " \ "jmp common_interrupt"); -#define platform_legacy_irq(irq) ((irq) < 16) - #endif - -#endif /* _ASM_HW_IRQ_H */ -- cgit v1.2.3 From 9b7dc567d03d74a1fbae84e88949b6a60d922d82 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 20:10:09 +0200 Subject: x86: unify interrupt vector defines The interrupt vector defines are copied 4 times around with minimal differences. Move them all into asm-x86/irq_vectors.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/entry_32.S | 2 +- arch/x86/kernel/vmiclock_32.c | 3 +- arch/x86/mach-visws/visws_apic.c | 3 +- include/asm-x86/hw_irq.h | 12 +- include/asm-x86/hw_irq_64.h | 71 --------- include/asm-x86/irq_32.h | 2 +- include/asm-x86/irq_64.h | 29 +--- include/asm-x86/irq_vectors.h | 168 ++++++++++++++++++++++ include/asm-x86/mach-default/irq_vectors.h | 96 ------------- include/asm-x86/mach-default/irq_vectors_limits.h | 16 --- include/asm-x86/mach-visws/irq_vectors.h | 62 -------- include/asm-x86/mach-voyager/irq_vectors.h | 79 ---------- 12 files changed, 184 insertions(+), 359 deletions(-) create mode 100644 include/asm-x86/irq_vectors.h delete mode 100644 include/asm-x86/mach-default/irq_vectors.h delete mode 100644 include/asm-x86/mach-default/irq_vectors_limits.h delete mode 100644 include/asm-x86/mach-visws/irq_vectors.h delete mode 100644 include/asm-x86/mach-voyager/irq_vectors.h diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 2a609dc3271c..0c7f64b99e17 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -51,7 +51,7 @@ #include #include #include -#include "irq_vectors.h" +#include /* * We use macros for low-level operations which need to be overridden diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c index a2b030780aa9..ba7d19e102b1 100644 --- a/arch/x86/kernel/vmiclock_32.c +++ b/arch/x86/kernel/vmiclock_32.c @@ -33,8 +33,7 @@ #include #include #include - -#include +#include #define VMI_ONESHOT (VMI_ALARM_IS_ONESHOT | VMI_CYCLES_REAL | vmi_get_alarm_wiring()) #define VMI_PERIODIC (VMI_ALARM_IS_PERIODIC | VMI_CYCLES_REAL | vmi_get_alarm_wiring()) diff --git a/arch/x86/mach-visws/visws_apic.c b/arch/x86/mach-visws/visws_apic.c index cef9cb1d15ac..d8b2cfd85d92 100644 --- a/arch/x86/mach-visws/visws_apic.c +++ b/arch/x86/mach-visws/visws_apic.c @@ -21,10 +21,9 @@ #include #include #include +#include #include "cobalt.h" -#include "irq_vectors.h" - static DEFINE_SPINLOCK(cobalt_lock); diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h index 38af08ed43cf..a8c5e8bdaa49 100644 --- a/include/asm-x86/hw_irq.h +++ b/include/asm-x86/hw_irq.h @@ -13,7 +13,7 @@ * unified by tglx */ -#define NMI_VECTOR 0x02 +#include #ifndef __ASSEMBLY__ @@ -75,6 +75,16 @@ extern void send_IPI(int dest, int vector); extern atomic_t irq_err_count; extern atomic_t irq_mis_count; +/* Voyager functions */ +extern asmlinkage void vic_cpi_interrupt(void); +extern asmlinkage void vic_sys_interrupt(void); +extern asmlinkage void vic_cmn_interrupt(void); +extern asmlinkage void qic_timer_interrupt(void); +extern asmlinkage void qic_invalidate_interrupt(void); +extern asmlinkage void qic_reschedule_interrupt(void); +extern asmlinkage void qic_enable_irq_interrupt(void); +extern asmlinkage void qic_call_function_interrupt(void); + #endif /* !ASSEMBLY_ */ #ifdef CONFIG_X86_32 diff --git a/include/asm-x86/hw_irq_64.h b/include/asm-x86/hw_irq_64.h index 28674576e9fe..98c9d494a711 100644 --- a/include/asm-x86/hw_irq_64.h +++ b/include/asm-x86/hw_irq_64.h @@ -1,74 +1,3 @@ -/* - * IDT vectors usable for external interrupt sources start - * at 0x20: - */ -#define FIRST_EXTERNAL_VECTOR 0x20 - -#define IA32_SYSCALL_VECTOR 0x80 - - -/* Reserve the lowest usable priority level 0x20 - 0x2f for triggering - * cleanup after irq migration. - */ -#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR - -/* - * Vectors 0x30-0x3f are used for ISA interrupts. - */ -#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10) -#define IRQ1_VECTOR (IRQ0_VECTOR + 1) -#define IRQ2_VECTOR (IRQ0_VECTOR + 2) -#define IRQ3_VECTOR (IRQ0_VECTOR + 3) -#define IRQ4_VECTOR (IRQ0_VECTOR + 4) -#define IRQ5_VECTOR (IRQ0_VECTOR + 5) -#define IRQ6_VECTOR (IRQ0_VECTOR + 6) -#define IRQ7_VECTOR (IRQ0_VECTOR + 7) -#define IRQ8_VECTOR (IRQ0_VECTOR + 8) -#define IRQ9_VECTOR (IRQ0_VECTOR + 9) -#define IRQ10_VECTOR (IRQ0_VECTOR + 10) -#define IRQ11_VECTOR (IRQ0_VECTOR + 11) -#define IRQ12_VECTOR (IRQ0_VECTOR + 12) -#define IRQ13_VECTOR (IRQ0_VECTOR + 13) -#define IRQ14_VECTOR (IRQ0_VECTOR + 14) -#define IRQ15_VECTOR (IRQ0_VECTOR + 15) - -/* - * Special IRQ vectors used by the SMP architecture, 0xf0-0xff - * - * some of the following vectors are 'rare', they are merged - * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. - * TLB, reschedule and local APIC vectors are performance-critical. - */ -#define SPURIOUS_APIC_VECTOR 0xff -#define ERROR_APIC_VECTOR 0xfe -#define RESCHEDULE_VECTOR 0xfd -#define CALL_FUNCTION_VECTOR 0xfc -/* fb free - please don't readd KDB here because it's useless - (hint - think what a NMI bit does to a vector) */ -#define THERMAL_APIC_VECTOR 0xfa -#define THRESHOLD_APIC_VECTOR 0xf9 -/* f8 free */ -#define INVALIDATE_TLB_VECTOR_END 0xf7 -#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */ - -#define NUM_INVALIDATE_TLB_VECTORS 8 - -/* - * Local APIC timer IRQ vector is on a different priority level, - * to work around the 'lost local interrupt if more than 2 IRQ - * sources per level' errata. - */ -#define LOCAL_TIMER_VECTOR 0xef - -/* - * First APIC vector available to drivers: (vectors 0x30-0xee) - * we start at 0x41 to spread out vectors evenly between priority - * levels. (0x80 is the syscall vector) - */ -#define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2) -#define FIRST_SYSTEM_VECTOR 0xef /* duplicated in irq.h */ - - #ifndef __ASSEMBLY__ typedef int vector_irq_t[NR_VECTORS]; diff --git a/include/asm-x86/irq_32.h b/include/asm-x86/irq_32.h index 0b79f3185243..c5c7542f79ad 100644 --- a/include/asm-x86/irq_32.h +++ b/include/asm-x86/irq_32.h @@ -12,7 +12,7 @@ #include /* include comes from machine specific directory */ -#include "irq_vectors.h" +#include #include static inline int irq_canonicalize(int irq) diff --git a/include/asm-x86/irq_64.h b/include/asm-x86/irq_64.h index 7608176590b6..3037ec667bfb 100644 --- a/include/asm-x86/irq_64.h +++ b/include/asm-x86/irq_64.h @@ -11,34 +11,7 @@ */ #include - -#define TIMER_IRQ 0 - -/* - * 16 8259A IRQ's, 208 potential APIC interrupt sources. - * Right now the APIC is mostly only used for SMP. - * 256 vectors is an architectural limit. (we can have - * more than 256 devices theoretically, but they will - * have to use shared interrupts) - * Since vectors 0x00-0x1f are used/reserved for the CPU, - * the usable vector space is 0x20-0xff (224 vectors) - */ - -/* - * The maximum number of vectors supported by x86_64 processors - * is limited to 256. For processors other than x86_64, NR_VECTORS - * should be changed accordingly. - */ -#define NR_VECTORS 256 - -#define FIRST_SYSTEM_VECTOR 0xef /* duplicated in hw_irq.h */ - -#if NR_CPUS < MAX_IO_APICS -#define NR_IRQS (NR_VECTORS + (32 * NR_CPUS)) -#else -#define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) -#endif -#define NR_IRQ_VECTORS NR_IRQS +#include static inline int irq_canonicalize(int irq) { diff --git a/include/asm-x86/irq_vectors.h b/include/asm-x86/irq_vectors.h new file mode 100644 index 000000000000..daceaaf0a3a4 --- /dev/null +++ b/include/asm-x86/irq_vectors.h @@ -0,0 +1,168 @@ +#ifndef _ASM_IRQ_VECTORS_H +#define _ASM_IRQ_VECTORS_H + +#include + +#define NMI_VECTOR 0x02 + +/* + * IDT vectors usable for external interrupt sources start + * at 0x20: + */ +#define FIRST_EXTERNAL_VECTOR 0x20 + +#ifdef CONFIG_X86_32 +# define SYSCALL_VECTOR 0x80 +#else +# define IA32_SYSCALL_VECTOR 0x80 +#endif + +/* + * Vectors 0x20-0x2f are used for ISA interrupts on 32 bit. + * + * Reserve the lowest usable priority level 0x20 - 0x2f for triggering + * cleanup after irq migration on 64 bit. + */ +#define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR + +/* + * Vectors 0x30-0x3f are used for ISA interrupts on 64 bit + */ +#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10) +#define IRQ1_VECTOR (IRQ0_VECTOR + 1) +#define IRQ2_VECTOR (IRQ0_VECTOR + 2) +#define IRQ3_VECTOR (IRQ0_VECTOR + 3) +#define IRQ4_VECTOR (IRQ0_VECTOR + 4) +#define IRQ5_VECTOR (IRQ0_VECTOR + 5) +#define IRQ6_VECTOR (IRQ0_VECTOR + 6) +#define IRQ7_VECTOR (IRQ0_VECTOR + 7) +#define IRQ8_VECTOR (IRQ0_VECTOR + 8) +#define IRQ9_VECTOR (IRQ0_VECTOR + 9) +#define IRQ10_VECTOR (IRQ0_VECTOR + 10) +#define IRQ11_VECTOR (IRQ0_VECTOR + 11) +#define IRQ12_VECTOR (IRQ0_VECTOR + 12) +#define IRQ13_VECTOR (IRQ0_VECTOR + 13) +#define IRQ14_VECTOR (IRQ0_VECTOR + 14) +#define IRQ15_VECTOR (IRQ0_VECTOR + 15) + +/* + * Special IRQ vectors used by the SMP architecture, 0xf0-0xff + * + * some of the following vectors are 'rare', they are merged + * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. + * TLB, reschedule and local APIC vectors are performance-critical. + * + * Vectors 0xf0-0xfa are free (reserved for future Linux use). + */ +#ifdef CONFIG_X86_32 + +# define SPURIOUS_APIC_VECTOR 0xff +# define ERROR_APIC_VECTOR 0xfe +# define INVALIDATE_TLB_VECTOR 0xfd +# define RESCHEDULE_VECTOR 0xfc +# define CALL_FUNCTION_VECTOR 0xfb +# define THERMAL_APIC_VECTOR 0xf0 + +#else + +#define SPURIOUS_APIC_VECTOR 0xff +#define ERROR_APIC_VECTOR 0xfe +#define RESCHEDULE_VECTOR 0xfd +#define CALL_FUNCTION_VECTOR 0xfc +#define THERMAL_APIC_VECTOR 0xfa +#define THRESHOLD_APIC_VECTOR 0xf9 +#define INVALIDATE_TLB_VECTOR_END 0xf7 +#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */ + +#define NUM_INVALIDATE_TLB_VECTORS 8 + +#endif + +/* + * Local APIC timer IRQ vector is on a different priority level, + * to work around the 'lost local interrupt if more than 2 IRQ + * sources per level' errata. + */ +#define LOCAL_TIMER_VECTOR 0xef + +/* + * First APIC vector available to drivers: (vectors 0x30-0xee) we + * start at 0x31(0x41) to spread out vectors evenly between priority + * levels. (0x80 is the syscall vector) + */ +#ifdef CONFIG_X86_32 +# define FIRST_DEVICE_VECTOR 0x31 +#else +# define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2) +#endif + +#define FIRST_SYSTEM_VECTOR 0xef + +#define NR_VECTORS 256 + +#define FPU_IRQ 13 + +#define FIRST_VM86_IRQ 3 +#define LAST_VM86_IRQ 15 +#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) + +#if !defined(CONFIG_X86_VISWS) && !defined(CONFIG_X86_VOYAGER) + +# if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT) + +# define NR_IRQS 224 + +# if (224 >= 32 * NR_CPUS) +# define NR_IRQ_VECTORS NR_IRQS +# else +# define NR_IRQ_VECTORS (32 * NR_CPUS) +# endif + +# else /* IO_APIC || PARAVIRT */ + +# define NR_IRQS 16 +# define NR_IRQ_VECTORS NR_IRQS + +# endif + +#else /* !VISWS && !VOYAGER */ + +# define NR_IRQS 224 +# define NR_IRQ_VECTORS NR_IRQS + +#endif /* VISWS */ + +/* Voyager specific defines */ +/* These define the CPIs we use in linux */ +#define VIC_CPI_LEVEL0 0 +#define VIC_CPI_LEVEL1 1 +/* now the fake CPIs */ +#define VIC_TIMER_CPI 2 +#define VIC_INVALIDATE_CPI 3 +#define VIC_RESCHEDULE_CPI 4 +#define VIC_ENABLE_IRQ_CPI 5 +#define VIC_CALL_FUNCTION_CPI 6 + +/* Now the QIC CPIs: Since we don't need the two initial levels, + * these are 2 less than the VIC CPIs */ +#define QIC_CPI_OFFSET 1 +#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET) +#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET) +#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET) +#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET) +#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET) + +#define VIC_START_FAKE_CPI VIC_TIMER_CPI +#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_CPI + +/* this is the SYS_INT CPI. */ +#define VIC_SYS_INT 8 +#define VIC_CMN_INT 15 + +/* This is the boot CPI for alternate processors. It gets overwritten + * by the above once the system has activated all available processors */ +#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0 +#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8) + + +#endif /* _ASM_IRQ_VECTORS_H */ diff --git a/include/asm-x86/mach-default/irq_vectors.h b/include/asm-x86/mach-default/irq_vectors.h deleted file mode 100644 index 881c63ca61ad..000000000000 --- a/include/asm-x86/mach-default/irq_vectors.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * This file should contain #defines for all of the interrupt vector - * numbers used by this architecture. - * - * In addition, there are some standard defines: - * - * FIRST_EXTERNAL_VECTOR: - * The first free place for external interrupts - * - * SYSCALL_VECTOR: - * The IRQ vector a syscall makes the user to kernel transition - * under. - * - * TIMER_IRQ: - * The IRQ number the timer interrupt comes in at. - * - * NR_IRQS: - * The total number of interrupt vectors (including all the - * architecture specific interrupts) needed. - * - */ -#ifndef _ASM_IRQ_VECTORS_H -#define _ASM_IRQ_VECTORS_H - -/* - * IDT vectors usable for external interrupt sources start - * at 0x20: - */ -#define FIRST_EXTERNAL_VECTOR 0x20 - -#define SYSCALL_VECTOR 0x80 - -/* - * Vectors 0x20-0x2f are used for ISA interrupts. - */ - -/* - * Special IRQ vectors used by the SMP architecture, 0xf0-0xff - * - * some of the following vectors are 'rare', they are merged - * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. - * TLB, reschedule and local APIC vectors are performance-critical. - * - * Vectors 0xf0-0xfa are free (reserved for future Linux use). - */ -#define SPURIOUS_APIC_VECTOR 0xff -#define ERROR_APIC_VECTOR 0xfe -#define INVALIDATE_TLB_VECTOR 0xfd -#define RESCHEDULE_VECTOR 0xfc -#define CALL_FUNCTION_VECTOR 0xfb - -#define THERMAL_APIC_VECTOR 0xf0 -/* - * Local APIC timer IRQ vector is on a different priority level, - * to work around the 'lost local interrupt if more than 2 IRQ - * sources per level' errata. - */ -#define LOCAL_TIMER_VECTOR 0xef - -/* - * First APIC vector available to drivers: (vectors 0x30-0xee) - * we start at 0x31 to spread out vectors evenly between priority - * levels. (0x80 is the syscall vector) - */ -#define FIRST_DEVICE_VECTOR 0x31 -#define FIRST_SYSTEM_VECTOR 0xef - -#define TIMER_IRQ 0 - -/* - * 16 8259A IRQ's, 208 potential APIC interrupt sources. - * Right now the APIC is mostly only used for SMP. - * 256 vectors is an architectural limit. (we can have - * more than 256 devices theoretically, but they will - * have to use shared interrupts) - * Since vectors 0x00-0x1f are used/reserved for the CPU, - * the usable vector space is 0x20-0xff (224 vectors) - */ - -/* - * The maximum number of vectors supported by i386 processors - * is limited to 256. For processors other than i386, NR_VECTORS - * should be changed accordingly. - */ -#define NR_VECTORS 256 - -#include "irq_vectors_limits.h" - -#define FPU_IRQ 13 - -#define FIRST_VM86_IRQ 3 -#define LAST_VM86_IRQ 15 -#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) - - -#endif /* _ASM_IRQ_VECTORS_H */ diff --git a/include/asm-x86/mach-default/irq_vectors_limits.h b/include/asm-x86/mach-default/irq_vectors_limits.h deleted file mode 100644 index a90c7a60109f..000000000000 --- a/include/asm-x86/mach-default/irq_vectors_limits.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _ASM_IRQ_VECTORS_LIMITS_H -#define _ASM_IRQ_VECTORS_LIMITS_H - -#if defined(CONFIG_X86_IO_APIC) || defined(CONFIG_PARAVIRT) -#define NR_IRQS 224 -# if (224 >= 32 * NR_CPUS) -# define NR_IRQ_VECTORS NR_IRQS -# else -# define NR_IRQ_VECTORS (32 * NR_CPUS) -# endif -#else -#define NR_IRQS 16 -#define NR_IRQ_VECTORS NR_IRQS -#endif - -#endif /* _ASM_IRQ_VECTORS_LIMITS_H */ diff --git a/include/asm-x86/mach-visws/irq_vectors.h b/include/asm-x86/mach-visws/irq_vectors.h deleted file mode 100644 index cb572d8db505..000000000000 --- a/include/asm-x86/mach-visws/irq_vectors.h +++ /dev/null @@ -1,62 +0,0 @@ -#ifndef _ASM_IRQ_VECTORS_H -#define _ASM_IRQ_VECTORS_H - -/* - * IDT vectors usable for external interrupt sources start - * at 0x20: - */ -#define FIRST_EXTERNAL_VECTOR 0x20 - -#define SYSCALL_VECTOR 0x80 - -/* - * Vectors 0x20-0x2f are used for ISA interrupts. - */ - -/* - * Special IRQ vectors used by the SMP architecture, 0xf0-0xff - * - * some of the following vectors are 'rare', they are merged - * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. - * TLB, reschedule and local APIC vectors are performance-critical. - * - * Vectors 0xf0-0xfa are free (reserved for future Linux use). - */ -#define SPURIOUS_APIC_VECTOR 0xff -#define ERROR_APIC_VECTOR 0xfe -#define INVALIDATE_TLB_VECTOR 0xfd -#define RESCHEDULE_VECTOR 0xfc -#define CALL_FUNCTION_VECTOR 0xfb - -#define THERMAL_APIC_VECTOR 0xf0 -/* - * Local APIC timer IRQ vector is on a different priority level, - * to work around the 'lost local interrupt if more than 2 IRQ - * sources per level' errata. - */ -#define LOCAL_TIMER_VECTOR 0xef - -/* - * First APIC vector available to drivers: (vectors 0x30-0xee) - * we start at 0x31 to spread out vectors evenly between priority - * levels. (0x80 is the syscall vector) - */ -#define FIRST_DEVICE_VECTOR 0x31 -#define FIRST_SYSTEM_VECTOR 0xef - -#define TIMER_IRQ 0 - -/* - * IRQ definitions - */ -#define NR_VECTORS 256 -#define NR_IRQS 224 -#define NR_IRQ_VECTORS NR_IRQS - -#define FPU_IRQ 13 - -#define FIRST_VM86_IRQ 3 -#define LAST_VM86_IRQ 15 -#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) - -#endif /* _ASM_IRQ_VECTORS_H */ diff --git a/include/asm-x86/mach-voyager/irq_vectors.h b/include/asm-x86/mach-voyager/irq_vectors.h deleted file mode 100644 index 165421f5821c..000000000000 --- a/include/asm-x86/mach-voyager/irq_vectors.h +++ /dev/null @@ -1,79 +0,0 @@ -/* -*- mode: c; c-basic-offset: 8 -*- */ - -/* Copyright (C) 2002 - * - * Author: James.Bottomley@HansenPartnership.com - * - * linux/arch/i386/voyager/irq_vectors.h - * - * This file provides definitions for the VIC and QIC CPIs - */ - -#ifndef _ASM_IRQ_VECTORS_H -#define _ASM_IRQ_VECTORS_H - -/* - * IDT vectors usable for external interrupt sources start - * at 0x20: - */ -#define FIRST_EXTERNAL_VECTOR 0x20 - -#define SYSCALL_VECTOR 0x80 - -/* - * Vectors 0x20-0x2f are used for ISA interrupts. - */ - -/* These define the CPIs we use in linux */ -#define VIC_CPI_LEVEL0 0 -#define VIC_CPI_LEVEL1 1 -/* now the fake CPIs */ -#define VIC_TIMER_CPI 2 -#define VIC_INVALIDATE_CPI 3 -#define VIC_RESCHEDULE_CPI 4 -#define VIC_ENABLE_IRQ_CPI 5 -#define VIC_CALL_FUNCTION_CPI 6 - -/* Now the QIC CPIs: Since we don't need the two initial levels, - * these are 2 less than the VIC CPIs */ -#define QIC_CPI_OFFSET 1 -#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET) -#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET) -#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET) -#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET) -#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET) - -#define VIC_START_FAKE_CPI VIC_TIMER_CPI -#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_CPI - -/* this is the SYS_INT CPI. */ -#define VIC_SYS_INT 8 -#define VIC_CMN_INT 15 - -/* This is the boot CPI for alternate processors. It gets overwritten - * by the above once the system has activated all available processors */ -#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0 -#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8) - -#define NR_VECTORS 256 -#define NR_IRQS 224 -#define NR_IRQ_VECTORS NR_IRQS - -#define FPU_IRQ 13 - -#define FIRST_VM86_IRQ 3 -#define LAST_VM86_IRQ 15 -#define invalid_vm86_irq(irq) ((irq) < 3 || (irq) > 15) - -#ifndef __ASSEMBLY__ -extern asmlinkage void vic_cpi_interrupt(void); -extern asmlinkage void vic_sys_interrupt(void); -extern asmlinkage void vic_cmn_interrupt(void); -extern asmlinkage void qic_timer_interrupt(void); -extern asmlinkage void qic_invalidate_interrupt(void); -extern asmlinkage void qic_reschedule_interrupt(void); -extern asmlinkage void qic_enable_irq_interrupt(void); -extern asmlinkage void qic_call_function_interrupt(void); -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_IRQ_VECTORS_H */ -- cgit v1.2.3 From 0bc471d93051a19545257909bc2ed2ad3b389b54 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 21:55:12 +0200 Subject: x86: move BUILD_IRQ macro magic to i8259_64.c i8259_64.c is the only place which uses those macros. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/i8259_64.c | 14 ++++++++++++++ include/asm-x86/hw_irq_64.h | 14 -------------- 2 files changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index fa57a1568508..c4ae4769ce67 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -34,6 +34,20 @@ * interrupt-controller happy. */ +#define IRQ_NAME2(nr) nr##_interrupt(void) +#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) + +/* + * SMP has a few special interrupts for IPI messages + */ + +#define BUILD_IRQ(nr) \ + asmlinkage void IRQ_NAME(nr); \ + asm("\n.p2align\n" \ + "IRQ" #nr "_interrupt:\n\t" \ + "push $~(" #nr ") ; " \ + "jmp common_interrupt"); + #define BI(x,y) \ BUILD_IRQ(x##y) diff --git a/include/asm-x86/hw_irq_64.h b/include/asm-x86/hw_irq_64.h index 98c9d494a711..9305f7456a7f 100644 --- a/include/asm-x86/hw_irq_64.h +++ b/include/asm-x86/hw_irq_64.h @@ -17,18 +17,4 @@ extern void native_init_IRQ(void); #include -#define IRQ_NAME2(nr) nr##_interrupt(void) -#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) - -/* - * SMP has a few special interrupts for IPI messages - */ - -#define BUILD_IRQ(nr) \ - asmlinkage void IRQ_NAME(nr); \ - asm("\n.p2align\n" \ - "IRQ" #nr "_interrupt:\n\t" \ - "push $~(" #nr ") ; " \ - "jmp common_interrupt"); - #endif -- cgit v1.2.3 From 97e7b6f54c0d66586a658e985630cd63040311fb Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 22:02:25 +0200 Subject: x86: unify apic interrupt function declarations Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/asm-x86/hw_irq.h | 4 ++++ include/asm-x86/hw_irq_64.h | 3 --- include/asm-x86/irq_64.h | 2 ++ 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h index a8c5e8bdaa49..cdb09d77af03 100644 --- a/include/asm-x86/hw_irq.h +++ b/include/asm-x86/hw_irq.h @@ -67,6 +67,10 @@ extern void print_IO_APIC(void); extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn); extern void setup_ioapic_dest(void); +#ifdef CONFIG_X86_64 +extern void enable_IO_APIC(void); +#endif + /* IPI functions */ extern void send_IPI_self(int vector); extern void send_IPI(int dest, int vector); diff --git a/include/asm-x86/hw_irq_64.h b/include/asm-x86/hw_irq_64.h index 9305f7456a7f..428785b3634b 100644 --- a/include/asm-x86/hw_irq_64.h +++ b/include/asm-x86/hw_irq_64.h @@ -12,9 +12,6 @@ extern spinlock_t vector_lock; * Interrupt entry/exit code at both C and assembly level */ -extern void enable_IO_APIC(void); -extern void native_init_IRQ(void); - #include #endif diff --git a/include/asm-x86/irq_64.h b/include/asm-x86/irq_64.h index 3037ec667bfb..1ef233d15dc4 100644 --- a/include/asm-x86/irq_64.h +++ b/include/asm-x86/irq_64.h @@ -27,4 +27,6 @@ extern void fixup_irqs(cpumask_t map); #define __ARCH_HAS_DO_SOFTIRQ 1 +extern void native_init_IRQ(void); + #endif /* _ASM_IRQ_H */ -- cgit v1.2.3 From 22dc12d1f694b9af88e616ab758ff90c69d0fc83 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 22:10:39 +0200 Subject: x86: unify hwirq.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/asm-x86/hw_irq.h | 11 +++++++---- include/asm-x86/hw_irq_32.h | 5 ----- include/asm-x86/hw_irq_64.h | 17 ----------------- 3 files changed, 7 insertions(+), 26 deletions(-) delete mode 100644 include/asm-x86/hw_irq_32.h delete mode 100644 include/asm-x86/hw_irq_64.h diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h index cdb09d77af03..1db2dff1ef49 100644 --- a/include/asm-x86/hw_irq.h +++ b/include/asm-x86/hw_irq.h @@ -89,12 +89,15 @@ extern asmlinkage void qic_reschedule_interrupt(void); extern asmlinkage void qic_enable_irq_interrupt(void); extern asmlinkage void qic_call_function_interrupt(void); -#endif /* !ASSEMBLY_ */ - #ifdef CONFIG_X86_32 -# include "hw_irq_32.h" +extern void (*const interrupt[NR_IRQS])(void); #else -# include "hw_irq_64.h" +typedef int vector_irq_t[NR_VECTORS]; +DECLARE_PER_CPU(vector_irq_t, vector_irq); +extern void __setup_vector_irq(int cpu); +extern spinlock_t vector_lock; #endif +#endif /* !ASSEMBLY_ */ + #endif diff --git a/include/asm-x86/hw_irq_32.h b/include/asm-x86/hw_irq_32.h deleted file mode 100644 index 89fca5af5958..000000000000 --- a/include/asm-x86/hw_irq_32.h +++ /dev/null @@ -1,5 +0,0 @@ - -extern void (*const interrupt[NR_IRQS])(void); - - - diff --git a/include/asm-x86/hw_irq_64.h b/include/asm-x86/hw_irq_64.h deleted file mode 100644 index 428785b3634b..000000000000 --- a/include/asm-x86/hw_irq_64.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __ASSEMBLY__ - -typedef int vector_irq_t[NR_VECTORS]; -DECLARE_PER_CPU(vector_irq_t, vector_irq); -extern void __setup_vector_irq(int cpu); -extern spinlock_t vector_lock; - -/* - * Various low-level irq details needed by irq.c, process.c, - * time.c, io_apic.c and smp.c - * - * Interrupt entry/exit code at both C and assembly level - */ - -#include - -#endif -- cgit v1.2.3 From 22067d4501bfb47c8ca34144f68fad734178914d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 22:14:44 +0200 Subject: x86: unify irq.h Not much difference in those files. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/asm-x86/irq.h | 51 +++++++++++++++++++++++++++++++++++++++++++++--- include/asm-x86/irq_32.h | 51 ------------------------------------------------ include/asm-x86/irq_64.h | 32 ------------------------------ 3 files changed, 48 insertions(+), 86 deletions(-) delete mode 100644 include/asm-x86/irq_32.h delete mode 100644 include/asm-x86/irq_64.h diff --git a/include/asm-x86/irq.h b/include/asm-x86/irq.h index 7ba905465a53..1a2925757317 100644 --- a/include/asm-x86/irq.h +++ b/include/asm-x86/irq.h @@ -1,5 +1,50 @@ -#ifdef CONFIG_X86_32 -# include "irq_32.h" +#ifndef _ASM_IRQ_H +#define _ASM_IRQ_H +/* + * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar + * + * IRQ/IPI changes taken from work by Thomas Radke + * + */ + +#include +#include + +static inline int irq_canonicalize(int irq) +{ + return ((irq == 2) ? 9 : irq); +} + +#ifdef CONFIG_X86_LOCAL_APIC +# define ARCH_HAS_NMI_WATCHDOG +#endif + +#ifdef CONFIG_4KSTACKS + extern void irq_ctx_init(int cpu); + extern void irq_ctx_exit(int cpu); +# define __ARCH_HAS_DO_SOFTIRQ #else -# include "irq_64.h" +# define irq_ctx_init(cpu) do { } while (0) +# define irq_ctx_exit(cpu) do { } while (0) +# ifdef CONFIG_X86_64 +# define __ARCH_HAS_DO_SOFTIRQ +# endif +#endif + +#ifdef CONFIG_IRQBALANCE +extern int irqbalance_disable(char *str); +#endif + +#ifdef CONFIG_HOTPLUG_CPU +#include +extern void fixup_irqs(cpumask_t map); #endif + +extern unsigned int do_IRQ(struct pt_regs *regs); +extern void init_IRQ(void); +extern void native_init_IRQ(void); + +/* Interrupt vector management */ +extern DECLARE_BITMAP(used_vectors, NR_VECTORS); + +#endif /* _ASM_IRQ_H */ diff --git a/include/asm-x86/irq_32.h b/include/asm-x86/irq_32.h deleted file mode 100644 index c5c7542f79ad..000000000000 --- a/include/asm-x86/irq_32.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _ASM_IRQ_H -#define _ASM_IRQ_H - -/* - * linux/include/asm/irq.h - * - * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar - * - * IRQ/IPI changes taken from work by Thomas Radke - * - */ - -#include -/* include comes from machine specific directory */ -#include -#include - -static inline int irq_canonicalize(int irq) -{ - return ((irq == 2) ? 9 : irq); -} - -#ifdef CONFIG_X86_LOCAL_APIC -# define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */ -#endif - -#ifdef CONFIG_4KSTACKS - extern void irq_ctx_init(int cpu); - extern void irq_ctx_exit(int cpu); -# define __ARCH_HAS_DO_SOFTIRQ -#else -# define irq_ctx_init(cpu) do { } while (0) -# define irq_ctx_exit(cpu) do { } while (0) -#endif - -#ifdef CONFIG_IRQBALANCE -extern int irqbalance_disable(char *str); -#endif - -#ifdef CONFIG_HOTPLUG_CPU -extern void fixup_irqs(cpumask_t map); -#endif - -unsigned int do_IRQ(struct pt_regs *regs); -void init_IRQ(void); -void __init native_init_IRQ(void); - -/* Interrupt vector management */ -extern DECLARE_BITMAP(used_vectors, NR_VECTORS); - -#endif /* _ASM_IRQ_H */ diff --git a/include/asm-x86/irq_64.h b/include/asm-x86/irq_64.h deleted file mode 100644 index 1ef233d15dc4..000000000000 --- a/include/asm-x86/irq_64.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _ASM_IRQ_H -#define _ASM_IRQ_H - -/* - * linux/include/asm/irq.h - * - * (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar - * - * IRQ/IPI changes taken from work by Thomas Radke - * - */ - -#include -#include - -static inline int irq_canonicalize(int irq) -{ - return ((irq == 2) ? 9 : irq); -} - -#define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */ - -#ifdef CONFIG_HOTPLUG_CPU -#include -extern void fixup_irqs(cpumask_t map); -#endif - -#define __ARCH_HAS_DO_SOFTIRQ 1 - -extern void native_init_IRQ(void); - -#endif /* _ASM_IRQ_H */ -- cgit v1.2.3 From 88a83350bc1955fa9d8fca059e19bc360fcef2ba Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 23:19:26 +0200 Subject: x86: declare setup_apic_routing Global functions need a prototype. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/asm-x86/genapic_64.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h index 1de931b263ce..0f8504627c41 100644 --- a/include/asm-x86/genapic_64.h +++ b/include/asm-x86/genapic_64.h @@ -44,4 +44,6 @@ DECLARE_PER_CPU(int, x2apic_extra_bits); extern void uv_cpu_init(void); extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip); +extern void setup_apic_routing(void); + #endif -- cgit v1.2.3 From 1a331957efd214fc3a84f70956dfaec65e70c031 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 3 May 2008 00:30:50 +0200 Subject: x86: move eisa_set_level_irq declaration to header Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 2 -- include/asm-x86/hw_irq.h | 3 +++ 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index c49ebcc6c41e..671591fcc61d 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -507,8 +507,6 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity) * Make sure all (legacy) PCI IRQs are set as level-triggered. */ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) { - extern void eisa_set_level_irq(unsigned int irq); - if (triggering == ACPI_LEVEL_SENSITIVE) eisa_set_level_irq(gsi); } diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h index 1db2dff1ef49..1428b41dcbb9 100644 --- a/include/asm-x86/hw_irq.h +++ b/include/asm-x86/hw_irq.h @@ -79,6 +79,9 @@ extern void send_IPI(int dest, int vector); extern atomic_t irq_err_count; extern atomic_t irq_mis_count; +/* EISA */ +extern void eisa_set_level_irq(unsigned int irq); + /* Voyager functions */ extern asmlinkage void vic_cpi_interrupt(void); extern asmlinkage void vic_sys_interrupt(void); -- cgit v1.2.3 From 305b92a2323eeaa4b481f409d54f778dd7e21a46 Mon Sep 17 00:00:00 2001 From: Alan Mayer Date: Tue, 15 Apr 2008 15:36:56 -0500 Subject: x86: change FIRST_SYSTEM_VECTOR to a variable The SGI UV system needs several more system vectors than a vanilla x86_64 system. Rather than burden the other archs with extra system vectors that they don't use, change FIRST_SYSTEM_VECTOR to a variable, so that it can be dynamic. Signed-off-by: Alan Mayer Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic_32.c | 14 +++++++------- arch/x86/kernel/i8259_64.c | 30 +++++++++++++++--------------- arch/x86/kernel/io_apic_32.c | 8 ++++++-- arch/x86/kernel/io_apic_64.c | 6 +++++- include/asm-x86/desc.h | 22 ++++++++++++++++++++++ include/asm-x86/irq_vectors.h | 2 -- 6 files changed, 55 insertions(+), 27 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6c..807158e4b5d0 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -1351,13 +1351,13 @@ void __init smp_intr_init(void) * The reschedule interrupt is a CPU-to-CPU reschedule-helper * IPI, driven by wakeup. */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); /* IPI for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); + alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); } #endif @@ -1370,15 +1370,15 @@ void __init apic_intr_init(void) smp_intr_init(); #endif /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); /* thermal monitor LVT interrupt */ #ifdef CONFIG_X86_MCE_P4THERMAL - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); #endif } diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index c4ae4769ce67..1870e0e86559 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -493,33 +493,33 @@ void __init native_init_IRQ(void) * The reschedule interrupt is a CPU-to-CPU reschedule-helper * IPI, driven by wakeup. */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); /* IPIs for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); /* Low priority IPI to cleanup after moving an irq */ set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); #endif - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); if (!acpi_ioapic) setup_irq(2, &irq2); diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index a40d54fc1fdd..0ae4a9d00ce8 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -83,6 +83,10 @@ int mp_irq_entries; static int disable_timer_pin_1 __initdata; +int first_system_vector = 0xfe; + +char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; + /* * Rough estimation of how many shared IRQs there are, can * be changed anytime. @@ -1176,7 +1180,7 @@ static int __assign_irq_vector(int irq) offset = current_offset; next: vector += 8; - if (vector >= FIRST_SYSTEM_VECTOR) { + if (vector >= first_system_vector) { offset = (offset + 1) % 8; vector = FIRST_DEVICE_VECTOR + offset; } @@ -2269,7 +2273,7 @@ void __init setup_IO_APIC(void) int i; /* Reserve all the system vectors. */ - for (i = FIRST_SYSTEM_VECTOR; i < NR_VECTORS; i++) + for (i = first_system_vector; i < NR_VECTORS; i++) set_bit(i, used_vectors); enable_IO_APIC(); diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index ef1a8dfcc529..f1e1ae3e5c7d 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -82,6 +82,10 @@ struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { static int assign_irq_vector(int irq, cpumask_t mask); +int first_system_vector = 0xfe; + +char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; + #define __apicdebuginit __init int sis_apic_bug; /* not actually supported, dummy for compile */ @@ -730,7 +734,7 @@ static int __assign_irq_vector(int irq, cpumask_t mask) offset = current_offset; next: vector += 8; - if (vector >= FIRST_SYSTEM_VECTOR) { + if (vector >= first_system_vector) { /* If we run out of vectors on large boxen, must share them. */ offset = (offset + 1) % 8; vector = FIRST_DEVICE_VECTOR + offset; diff --git a/include/asm-x86/desc.h b/include/asm-x86/desc.h index 268a012bcd79..b3875d4b4fab 100644 --- a/include/asm-x86/desc.h +++ b/include/asm-x86/desc.h @@ -311,6 +311,28 @@ static inline void set_intr_gate(unsigned int n, void *addr) _set_gate(n, GATE_INTERRUPT, addr, 0, 0, __KERNEL_CS); } +#define SYS_VECTOR_FREE 0 +#define SYS_VECTOR_ALLOCED 1 + +extern int first_system_vector; +extern char system_vectors[]; + +static inline void alloc_system_vector(int vector) +{ + if (system_vectors[vector] == SYS_VECTOR_FREE) { + system_vectors[vector] = SYS_VECTOR_ALLOCED; + if (first_system_vector > vector) + first_system_vector = vector; + } else + BUG(); +} + +static inline void alloc_intr_gate(unsigned int n, void *addr) +{ + alloc_system_vector(n); + set_intr_gate(n, addr); +} + /* * This routine sets up an interrupt gate at directory privilege level 3. */ diff --git a/include/asm-x86/irq_vectors.h b/include/asm-x86/irq_vectors.h index daceaaf0a3a4..3cb6d8c77b39 100644 --- a/include/asm-x86/irq_vectors.h +++ b/include/asm-x86/irq_vectors.h @@ -96,8 +96,6 @@ # define FIRST_DEVICE_VECTOR (IRQ15_VECTOR + 2) #endif -#define FIRST_SYSTEM_VECTOR 0xef - #define NR_VECTORS 256 #define FPU_IRQ 13 -- cgit v1.2.3 From ce17833183bf0a08ce3d174a2088eff0a06f2080 Mon Sep 17 00:00:00 2001 From: Alan Mayer Date: Wed, 16 Apr 2008 15:17:20 -0500 Subject: x86: change FIRST_SYSTEM_VECTOR to a variable, fix Fixes the build error introduced by my FIRST_SYSTEM_VECTOR patch Signed-off-by: Alan Mayer Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apic_32.c | 4 ++++ arch/x86/kernel/io_apic_32.c | 4 ---- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 807158e4b5d0..d5767cb19d56 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -71,6 +71,10 @@ int local_apic_timer_disabled; int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); +int first_system_vector = 0xfe; + +char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; + /* * Debug level, exported for io_apic.c */ diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 0ae4a9d00ce8..76769ccb1425 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -83,10 +83,6 @@ int mp_irq_entries; static int disable_timer_pin_1 __initdata; -int first_system_vector = 0xfe; - -char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE}; - /* * Rough estimation of how many shared IRQs there are, can * be changed anytime. -- cgit v1.2.3 From 04b361abfdc522239e3a071f3afdebf5787d9f03 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 5 May 2008 12:36:38 +0200 Subject: i386: Execute stack overflow warning on interrupt stack v2 Previously the reporting printk would run on the process stack, which risks overflow an already low stack. Instead execute it on the interrupt stack. This makes it more likely for the printk to make it actually out. It adds one not taken test/branch more to the interrupt path when stack overflow checking is enabled. We could avoid that by duplicating more code, but that seemed not worth it. Based on an observation by Eric Sandeen. v2: Fix warnings in some configs Signed-off-by: Andi Kleen Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq_32.c | 49 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 33 insertions(+), 16 deletions(-) diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 147352df28b9..3f76561da815 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -61,6 +61,26 @@ static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; #endif +static void stack_overflow(void) +{ + printk("low stack detected by irq handler\n"); + dump_stack(); +} + +static inline void call_on_stack2(void *func, void *stack, + unsigned long arg1, unsigned long arg2) +{ + unsigned long bx; + asm volatile( + " xchgl %%ebx,%%esp \n" + " call *%%edi \n" + " movl %%ebx,%%esp \n" + : "=a" (arg1), "=d" (arg2), "=b" (bx) + : "0" (arg1), "1" (arg2), "2" (stack), + "D" (func) + : "memory", "cc", "ecx"); +} + /* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific @@ -76,6 +96,7 @@ unsigned int do_IRQ(struct pt_regs *regs) union irq_ctx *curctx, *irqctx; u32 *isp; #endif + int overflow = 0; if (unlikely((unsigned)irq >= NR_IRQS)) { printk(KERN_EMERG "%s: cannot handle IRQ %d\n", @@ -92,11 +113,8 @@ unsigned int do_IRQ(struct pt_regs *regs) __asm__ __volatile__("andl %%esp,%0" : "=r" (sp) : "0" (THREAD_SIZE - 1)); - if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { - printk("do_IRQ: stack overflow: %ld\n", - sp - sizeof(struct thread_info)); - dump_stack(); - } + if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) + overflow = 1; } #endif @@ -112,8 +130,6 @@ unsigned int do_IRQ(struct pt_regs *regs) * current stack (which is the irq stack already after all) */ if (curctx != irqctx) { - int arg1, arg2, bx; - /* build the stack frame on the IRQ stack */ isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); irqctx->tinfo.task = curctx->tinfo.task; @@ -127,18 +143,19 @@ unsigned int do_IRQ(struct pt_regs *regs) (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | (curctx->tinfo.preempt_count & SOFTIRQ_MASK); - asm volatile( - " xchgl %%ebx,%%esp \n" - " call *%%edi \n" - " movl %%ebx,%%esp \n" - : "=a" (arg1), "=d" (arg2), "=b" (bx) - : "0" (irq), "1" (desc), "2" (isp), - "D" (desc->handle_irq) - : "memory", "cc", "ecx" - ); + /* Execute warning on interrupt stack */ + if (unlikely(overflow)) + call_on_stack2(stack_overflow, isp, 0, 0); + + call_on_stack2(desc->handle_irq, isp, irq, (unsigned long)desc); } else #endif + { + /* AK: Slightly bogus here */ + if (overflow) + stack_overflow(); desc->handle_irq(irq, desc); + } irq_exit(); set_irq_regs(old_regs); -- cgit v1.2.3 From de9b10af1287bf25b9c0433de53a2e95ef611aa7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 5 May 2008 15:58:15 +0200 Subject: x86: janitor stack overflow warning patch Add KERN_WARNING to the printk as this could not be done in the original patch, which allegedly only moves code around. Un#ifdef do_IRQ. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq_32.c | 136 ++++++++++++++++++++++++++--------------------- 1 file changed, 75 insertions(+), 61 deletions(-) diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 3f76561da815..1c470d2e5af7 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -48,6 +48,29 @@ void ack_bad_irq(unsigned int irq) #endif } +#ifdef CONFIG_DEBUG_STACKOVERFLOW +/* Debugging check for stack overflow: is there less than 1KB free? */ +static int check_stack_overflow(void) +{ + long sp; + + __asm__ __volatile__("andl %%esp,%0" : + "=r" (sp) : "0" (THREAD_SIZE - 1)); + + return sp < (sizeof(struct thread_info) + STACK_WARN); +} + +static void print_stack_overflow(void) +{ + printk(KERN_WARNING "low stack detected by irq handler\n"); + dump_stack(); +} + +#else +static inline int check_stack_overflow(void) { return 0; } +static inline void print_stack_overflow(void) { } +#endif + #ifdef CONFIG_4KSTACKS /* * per-CPU IRQ handling contexts (thread information and stack) @@ -59,18 +82,12 @@ union irq_ctx { static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; -#endif - -static void stack_overflow(void) -{ - printk("low stack detected by irq handler\n"); - dump_stack(); -} -static inline void call_on_stack2(void *func, void *stack, - unsigned long arg1, unsigned long arg2) +static inline void call_on_stack(void *func, void *stack, + unsigned long arg1, void *arg2) { unsigned long bx; + asm volatile( " xchgl %%ebx,%%esp \n" " call *%%edi \n" @@ -81,22 +98,61 @@ static inline void call_on_stack2(void *func, void *stack, : "memory", "cc", "ecx"); } +static inline int +execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) +{ + union irq_ctx *curctx, *irqctx; + u32 *isp; + + curctx = (union irq_ctx *) current_thread_info(); + irqctx = hardirq_ctx[smp_processor_id()]; + + /* + * this is where we switch to the IRQ stack. However, if we are + * already using the IRQ stack (because we interrupted a hardirq + * handler) we can't do that and just have to keep using the + * current stack (which is the irq stack already after all) + */ + if (unlikely(curctx == irqctx)) + return 0; + + /* build the stack frame on the IRQ stack */ + isp = (u32 *) ((char*)irqctx + sizeof(*irqctx)); + irqctx->tinfo.task = curctx->tinfo.task; + irqctx->tinfo.previous_esp = current_stack_pointer; + + /* + * Copy the softirq bits in preempt_count so that the + * softirq checks work in the hardirq context. + */ + irqctx->tinfo.preempt_count = + (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | + (curctx->tinfo.preempt_count & SOFTIRQ_MASK); + + if (unlikely(overflow)) + call_on_stack(print_stack_overflow, isp, 0, NULL); + + call_on_stack(desc->handle_irq, isp, irq, desc); + + return 1; +} + +#else +static inline int +execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; } +#endif + /* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific * handlers). */ unsigned int do_IRQ(struct pt_regs *regs) -{ +{ struct pt_regs *old_regs; /* high bit used in ret_from_ code */ - int irq = ~regs->orig_ax; + int overflow, irq = ~regs->orig_ax; struct irq_desc *desc = irq_desc + irq; -#ifdef CONFIG_4KSTACKS - union irq_ctx *curctx, *irqctx; - u32 *isp; -#endif - int overflow = 0; if (unlikely((unsigned)irq >= NR_IRQS)) { printk(KERN_EMERG "%s: cannot handle IRQ %d\n", @@ -106,54 +162,12 @@ unsigned int do_IRQ(struct pt_regs *regs) old_regs = set_irq_regs(regs); irq_enter(); -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: is there less than 1KB free? */ - { - long sp; - - __asm__ __volatile__("andl %%esp,%0" : - "=r" (sp) : "0" (THREAD_SIZE - 1)); - if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) - overflow = 1; - } -#endif - -#ifdef CONFIG_4KSTACKS - curctx = (union irq_ctx *) current_thread_info(); - irqctx = hardirq_ctx[smp_processor_id()]; + overflow = check_stack_overflow(); - /* - * this is where we switch to the IRQ stack. However, if we are - * already using the IRQ stack (because we interrupted a hardirq - * handler) we can't do that and just have to keep using the - * current stack (which is the irq stack already after all) - */ - if (curctx != irqctx) { - /* build the stack frame on the IRQ stack */ - isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); - irqctx->tinfo.task = curctx->tinfo.task; - irqctx->tinfo.previous_esp = current_stack_pointer; - - /* - * Copy the softirq bits in preempt_count so that the - * softirq checks work in the hardirq context. - */ - irqctx->tinfo.preempt_count = - (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) | - (curctx->tinfo.preempt_count & SOFTIRQ_MASK); - - /* Execute warning on interrupt stack */ + if (!execute_on_irq_stack(overflow, desc, irq)) { if (unlikely(overflow)) - call_on_stack2(stack_overflow, isp, 0, 0); - - call_on_stack2(desc->handle_irq, isp, irq, (unsigned long)desc); - } else -#endif - { - /* AK: Slightly bogus here */ - if (overflow) - stack_overflow(); + print_stack_overflow(); desc->handle_irq(irq, desc); } -- cgit v1.2.3 From 403d8efc94cd02ae36e7db13c4edf1d06d7b7fac Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 5 May 2008 18:13:50 +0200 Subject: x86: irq_32 move 4kstacks code to one place Move the 4KSTACKS related code to one place. This allows to un#ifdef do_IRQ() and share the executed on stack for the stack overflow printk and the softirq call. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/irq_32.c | 163 ++++++++++++++++++++++------------------------- 1 file changed, 77 insertions(+), 86 deletions(-) diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 1c470d2e5af7..4e3e8ec60276 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -83,26 +83,28 @@ union irq_ctx { static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; -static inline void call_on_stack(void *func, void *stack, - unsigned long arg1, void *arg2) +static char softirq_stack[NR_CPUS * THREAD_SIZE] + __attribute__((__section__(".bss.page_aligned"))); + +static char hardirq_stack[NR_CPUS * THREAD_SIZE] + __attribute__((__section__(".bss.page_aligned"))); + +static void call_on_stack(void *func, void *stack) { - unsigned long bx; - - asm volatile( - " xchgl %%ebx,%%esp \n" - " call *%%edi \n" - " movl %%ebx,%%esp \n" - : "=a" (arg1), "=d" (arg2), "=b" (bx) - : "0" (arg1), "1" (arg2), "2" (stack), - "D" (func) - : "memory", "cc", "ecx"); + asm volatile("xchgl %%ebx,%%esp \n" + "call *%%edi \n" + "movl %%ebx,%%esp \n" + : "=b" (stack) + : "0" (stack), + "D"(func) + : "memory", "cc", "edx", "ecx", "eax"); } static inline int execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { union irq_ctx *curctx, *irqctx; - u32 *isp; + u32 *isp, arg1, arg2; curctx = (union irq_ctx *) current_thread_info(); irqctx = hardirq_ctx[smp_processor_id()]; @@ -130,64 +132,22 @@ execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) (curctx->tinfo.preempt_count & SOFTIRQ_MASK); if (unlikely(overflow)) - call_on_stack(print_stack_overflow, isp, 0, NULL); - - call_on_stack(desc->handle_irq, isp, irq, desc); - - return 1; -} - -#else -static inline int -execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; } -#endif - -/* - * do_IRQ handles all normal device IRQ's (the special - * SMP cross-CPU interrupts have their own specific - * handlers). - */ -unsigned int do_IRQ(struct pt_regs *regs) -{ - struct pt_regs *old_regs; - /* high bit used in ret_from_ code */ - int overflow, irq = ~regs->orig_ax; - struct irq_desc *desc = irq_desc + irq; - - if (unlikely((unsigned)irq >= NR_IRQS)) { - printk(KERN_EMERG "%s: cannot handle IRQ %d\n", - __func__, irq); - BUG(); - } - - old_regs = set_irq_regs(regs); - irq_enter(); - - overflow = check_stack_overflow(); - - if (!execute_on_irq_stack(overflow, desc, irq)) { - if (unlikely(overflow)) - print_stack_overflow(); - desc->handle_irq(irq, desc); - } - - irq_exit(); - set_irq_regs(old_regs); + call_on_stack(print_stack_overflow, isp); + + asm volatile("xchgl %%ebx,%%esp \n" + "call *%%edi \n" + "movl %%ebx,%%esp \n" + : "=a" (arg1), "=d" (arg2), "=b" (isp) + : "0" (irq), "1" (desc), "2" (isp), + "D" (desc->handle_irq) + : "memory", "cc", "ecx"); return 1; } -#ifdef CONFIG_4KSTACKS - -static char softirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__section__(".bss.page_aligned"))); - -static char hardirq_stack[NR_CPUS * THREAD_SIZE] - __attribute__((__section__(".bss.page_aligned"))); - /* * allocate per-cpu stacks for hardirq and for softirq processing */ -void irq_ctx_init(int cpu) +void __cpuinit irq_ctx_init(int cpu) { union irq_ctx *irqctx; @@ -195,25 +155,25 @@ void irq_ctx_init(int cpu) return; irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE]; - irqctx->tinfo.task = NULL; - irqctx->tinfo.exec_domain = NULL; - irqctx->tinfo.cpu = cpu; - irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; - irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); + irqctx->tinfo.task = NULL; + irqctx->tinfo.exec_domain = NULL; + irqctx->tinfo.cpu = cpu; + irqctx->tinfo.preempt_count = HARDIRQ_OFFSET; + irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); hardirq_ctx[cpu] = irqctx; irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE]; - irqctx->tinfo.task = NULL; - irqctx->tinfo.exec_domain = NULL; - irqctx->tinfo.cpu = cpu; - irqctx->tinfo.preempt_count = 0; - irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); + irqctx->tinfo.task = NULL; + irqctx->tinfo.exec_domain = NULL; + irqctx->tinfo.cpu = cpu; + irqctx->tinfo.preempt_count = 0; + irqctx->tinfo.addr_limit = MAKE_MM_SEG(0); softirq_ctx[cpu] = irqctx; - printk("CPU %u irqstacks, hard=%p soft=%p\n", - cpu,hardirq_ctx[cpu],softirq_ctx[cpu]); + printk(KERN_DEBUG "CPU %u irqstacks, hard=%p soft=%p\n", + cpu,hardirq_ctx[cpu],softirq_ctx[cpu]); } void irq_ctx_exit(int cpu) @@ -242,24 +202,55 @@ asmlinkage void do_softirq(void) /* build the stack frame on the softirq stack */ isp = (u32*) ((char*)irqctx + sizeof(*irqctx)); - asm volatile( - " xchgl %%ebx,%%esp \n" - " call __do_softirq \n" - " movl %%ebx,%%esp \n" - : "=b"(isp) - : "0"(isp) - : "memory", "cc", "edx", "ecx", "eax" - ); + call_on_stack(__do_softirq, isp); /* * Shouldnt happen, we returned above if in_interrupt(): - */ + */ WARN_ON_ONCE(softirq_count()); } local_irq_restore(flags); } + +#else +static inline int +execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; } #endif +/* + * do_IRQ handles all normal device IRQ's (the special + * SMP cross-CPU interrupts have their own specific + * handlers). + */ +unsigned int do_IRQ(struct pt_regs *regs) +{ + struct pt_regs *old_regs; + /* high bit used in ret_from_ code */ + int overflow, irq = ~regs->orig_ax; + struct irq_desc *desc = irq_desc + irq; + + if (unlikely((unsigned)irq >= NR_IRQS)) { + printk(KERN_EMERG "%s: cannot handle IRQ %d\n", + __func__, irq); + BUG(); + } + + old_regs = set_irq_regs(regs); + irq_enter(); + + overflow = check_stack_overflow(); + + if (!execute_on_irq_stack(overflow, desc, irq)) { + if (unlikely(overflow)) + print_stack_overflow(); + desc->handle_irq(irq, desc); + } + + irq_exit(); + set_irq_regs(old_regs); + return 1; +} + /* * Interrupt statistics: */ -- cgit v1.2.3 From 988f7b5789ccf5cfed14c72e28573a49f0cb4809 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Tue, 18 Mar 2008 17:00:22 -0700 Subject: x86: PAT export resource_wc in pci sysfs For the ranges with IORESOURCE_PREFETCH, export a new resource_wc interface in pci /sysfs along with resource (which is uncached). Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Acked-by: Jesse Barnes Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- Documentation/filesystems/sysfs-pci.txt | 1 + drivers/pci/pci-sysfs.c | 84 ++++++++++++++++++++++++--------- include/linux/pci.h | 1 + 3 files changed, 64 insertions(+), 22 deletions(-) diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt index 5daa2aaec2c5..68ef48839c04 100644 --- a/Documentation/filesystems/sysfs-pci.txt +++ b/Documentation/filesystems/sysfs-pci.txt @@ -36,6 +36,7 @@ files, each with their own function. local_cpus nearby CPU mask (cpumask, ro) resource PCI resource host addresses (ascii, ro) resource0..N PCI resource N, if present (binary, mmap) + resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap) rom PCI ROM resource, if present (binary, ro) subsystem_device PCI subsystem device (ascii, ro) subsystem_vendor PCI subsystem vendor (ascii, ro) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 271d41cc05ab..9ec7d3977a82 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -489,13 +489,14 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr, * @kobj: kobject for mapping * @attr: struct bin_attribute for the file being mapped * @vma: struct vm_area_struct passed into the mmap + * @write_combine: 1 for write_combine mapping * * Use the regular PCI mapping routines to map a PCI resource into userspace. * FIXME: write combining? maybe automatic for prefetchable regions? */ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, - struct vm_area_struct *vma) + struct vm_area_struct *vma, int write_combine) { struct pci_dev *pdev = to_pci_dev(container_of(kobj, struct device, kobj)); @@ -518,7 +519,21 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, vma->vm_pgoff += start >> PAGE_SHIFT; mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io; - return pci_mmap_page_range(pdev, vma, mmap_type, 0); + return pci_mmap_page_range(pdev, vma, mmap_type, write_combine); +} + +static int +pci_mmap_resource_uc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 0); +} + +static int +pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 1); } /** @@ -541,9 +556,46 @@ pci_remove_resource_files(struct pci_dev *pdev) sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); kfree(res_attr); } + + res_attr = pdev->res_attr_wc[i]; + if (res_attr) { + sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); + kfree(res_attr); + } } } +static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine) +{ + /* allocate attribute structure, piggyback attribute name */ + int name_len = write_combine ? 13 : 10; + struct bin_attribute *res_attr; + int retval; + + res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC); + if (res_attr) { + char *res_attr_name = (char *)(res_attr + 1); + + if (write_combine) { + pdev->res_attr_wc[num] = res_attr; + sprintf(res_attr_name, "resource%d_wc", num); + res_attr->mmap = pci_mmap_resource_wc; + } else { + pdev->res_attr[num] = res_attr; + sprintf(res_attr_name, "resource%d", num); + res_attr->mmap = pci_mmap_resource_uc; + } + res_attr->attr.name = res_attr_name; + res_attr->attr.mode = S_IRUSR | S_IWUSR; + res_attr->size = pci_resource_len(pdev, num); + res_attr->private = &pdev->resource[num]; + retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); + } else + retval = -ENOMEM; + + return retval; +} + /** * pci_create_resource_files - create resource files in sysfs for @dev * @dev: dev in question @@ -557,31 +609,19 @@ static int pci_create_resource_files(struct pci_dev *pdev) /* Expose the PCI resources from this device as files */ for (i = 0; i < PCI_ROM_RESOURCE; i++) { - struct bin_attribute *res_attr; /* skip empty resources */ if (!pci_resource_len(pdev, i)) continue; - /* allocate attribute structure, piggyback attribute name */ - res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC); - if (res_attr) { - char *res_attr_name = (char *)(res_attr + 1); - - pdev->res_attr[i] = res_attr; - sprintf(res_attr_name, "resource%d", i); - res_attr->attr.name = res_attr_name; - res_attr->attr.mode = S_IRUSR | S_IWUSR; - res_attr->size = pci_resource_len(pdev, i); - res_attr->mmap = pci_mmap_resource; - res_attr->private = &pdev->resource[i]; - retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); - if (retval) { - pci_remove_resource_files(pdev); - return retval; - } - } else { - return -ENOMEM; + retval = pci_create_attr(pdev, i, 0); + /* for prefetchable resources, create a WC mappable file */ + if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH) + retval = pci_create_attr(pdev, i, 1); + + if (retval) { + pci_remove_resource_files(pdev); + return retval; } } return 0; diff --git a/include/linux/pci.h b/include/linux/pci.h index 509159bcd4e7..d18b1dd49fab 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -206,6 +206,7 @@ struct pci_dev { struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */ int rom_attr_enabled; /* has display of the rom attribute been enabled? */ struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */ + struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */ #ifdef CONFIG_PCI_MSI struct list_head msi_list; #endif -- cgit v1.2.3 From 77b52b4c5c66175553ee59eb43f74366f1e54bde Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Mon, 5 May 2008 19:09:10 -0700 Subject: x86: add "debugpat" boot option enable debug messages by a boot option "debugpat". Signed-off-by: Venkatesh Pallipadi Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/pat.c | 27 ++++++++++++++++++++------- 1 file changed, 20 insertions(+), 7 deletions(-) diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 60adbe22efa0..1a82f4db8a46 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -42,6 +42,19 @@ static int nopat(char *str) early_param("nopat", nopat); #endif + +static int debug_enable; +static int __init pat_debug_setup(char *str) +{ + debug_enable = 1; + return 0; +} +__setup("debugpat", pat_debug_setup); + +#define dprintk(fmt, arg...) \ + do { if (debug_enable) printk(KERN_INFO fmt, ##arg); } while (0) + + static u64 __read_mostly boot_pat_state; enum { @@ -279,7 +292,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, struct memtype *saved_ptr; if (parse->start >= end) { - pr_debug("New Entry\n"); + dprintk("New Entry\n"); list_add(&new_entry->nd, parse->nd.prev); new_entry = NULL; break; @@ -329,7 +342,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, break; } - pr_debug("Overlap at 0x%Lx-0x%Lx\n", + dprintk("Overlap at 0x%Lx-0x%Lx\n", saved_ptr->start, saved_ptr->end); /* No conflict. Go ahead and add this new entry */ list_add(&new_entry->nd, saved_ptr->nd.prev); @@ -381,7 +394,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, break; } - pr_debug(KERN_INFO "Overlap at 0x%Lx-0x%Lx\n", + dprintk("Overlap at 0x%Lx-0x%Lx\n", saved_ptr->start, saved_ptr->end); /* No conflict. Go ahead and add this new entry */ list_add(&new_entry->nd, &saved_ptr->nd); @@ -403,16 +416,16 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, if (new_entry) { /* No conflict. Not yet added to the list. Add to the tail */ list_add_tail(&new_entry->nd, &memtype_list); - pr_debug("New Entry\n"); + dprintk("New Entry\n"); } if (ret_type) { - pr_debug( + dprintk( "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n", start, end, cattr_name(actual_type), cattr_name(req_type), cattr_name(*ret_type)); } else { - pr_debug( + dprintk( "reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s\n", start, end, cattr_name(actual_type), cattr_name(req_type)); @@ -453,7 +466,7 @@ int free_memtype(u64 start, u64 end) current->comm, current->pid, start, end); } - pr_debug("free_memtype request 0x%Lx-0x%Lx\n", start, end); + dprintk("free_memtype request 0x%Lx-0x%Lx\n", start, end); return err; } -- cgit v1.2.3 From f8096f92b87d81c55ed63964d27baa9ce5ffe508 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 22 Apr 2008 16:27:29 +0100 Subject: x86: separate cmpxchg8b checking from PAE checking .. allowing the former to be use in non-PAE kernels, too. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.cpu | 4 ++++ include/asm-x86/required-features.h | 6 +++++- 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 2ad6301849a1..3d22bb8175b4 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -399,6 +399,10 @@ config X86_TSC def_bool y depends on ((MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64 +config X86_CMPXCHG64 + def_bool y + depends on X86_PAE || X86_64 + # this should be set for all -march=.. options where the compiler # generates cmov. config X86_CMOV diff --git a/include/asm-x86/required-features.h b/include/asm-x86/required-features.h index 7400d3ad75c6..8c387198ca88 100644 --- a/include/asm-x86/required-features.h +++ b/include/asm-x86/required-features.h @@ -19,9 +19,13 @@ #if defined(CONFIG_X86_PAE) || defined(CONFIG_X86_64) # define NEED_PAE (1<<(X86_FEATURE_PAE & 31)) -# define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31)) #else # define NEED_PAE 0 +#endif + +#ifdef CONFIG_X86_CMPXCHG64 +# define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31)) +#else # define NEED_CX8 0 #endif -- cgit v1.2.3 From aa134f1b09df6beaa4d031a50d5fda1f3cebce6c Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 8 Apr 2008 10:49:03 +0200 Subject: x86: iommu: use symbolic constants, not hardcoded numbers Move symbolic constants into gart.h, and use them instead of hardcoded constant. Signed-off-by: Pavel Machek Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/pci-gart_64.c | 10 +++++----- drivers/char/agp/amd64-agp.c | 25 +++---------------------- include/asm-x86/gart.h | 21 +++++++++++++++++++++ 3 files changed, 29 insertions(+), 27 deletions(-) diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index c07455d1695f..bffcf455c857 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -598,13 +598,13 @@ static __init int init_k8_gatt(struct agp_kern_info *info) dev = k8_northbridges[i]; gatt_reg = __pa(gatt) >> 12; gatt_reg <<= 4; - pci_write_config_dword(dev, 0x98, gatt_reg); - pci_read_config_dword(dev, 0x90, &ctl); + pci_write_config_dword(dev, AMD64_GARTTABLEBASE, gatt_reg); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - ctl |= 1; - ctl &= ~((1<<4) | (1<<5)); + ctl |= GARTEN; + ctl &= ~(DISGARTCPU | DISGARTIO); - pci_write_config_dword(dev, 0x90, ctl); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } flush_gart(); diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index d8200ac8f8cb..25d64224cdbb 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -16,28 +16,9 @@ #include /* PAGE_SIZE */ #include #include +#include #include "agp.h" -/* PTE bits. */ -#define GPTE_VALID 1 -#define GPTE_COHERENT 2 - -/* Aperture control register bits. */ -#define GARTEN (1<<0) -#define DISGARTCPU (1<<4) -#define DISGARTIO (1<<5) - -/* GART cache control register bits. */ -#define INVGART (1<<0) -#define GARTPTEERR (1<<1) - -/* K8 On-cpu GART registers */ -#define AMD64_GARTAPERTURECTL 0x90 -#define AMD64_GARTAPERTUREBASE 0x94 -#define AMD64_GARTTABLEBASE 0x98 -#define AMD64_GARTCACHECTL 0x9c -#define AMD64_GARTEN (1<<0) - /* NVIDIA K8 registers */ #define NVIDIA_X86_64_0_APBASE 0x10 #define NVIDIA_X86_64_1_APBASE1 0x50 @@ -165,7 +146,7 @@ static int amd64_fetch_size(void) * In a multiprocessor x86-64 system, this function gets * called once for each CPU. */ -static u64 amd64_configure (struct pci_dev *hammer, u64 gatt_table) +static u64 amd64_configure(struct pci_dev *hammer, u64 gatt_table) { u64 aperturebase; u32 tmp; @@ -181,7 +162,7 @@ static u64 amd64_configure (struct pci_dev *hammer, u64 gatt_table) addr >>= 12; tmp = (u32) addr<<4; tmp &= ~0xf; - pci_write_config_dword (hammer, AMD64_GARTTABLEBASE, tmp); + pci_write_config_dword(hammer, AMD64_GARTTABLEBASE, tmp); /* Enable GART translation for this hammer. */ pci_read_config_dword(hammer, AMD64_GARTAPERTURECTL, &tmp); diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h index 90958ed993fa..248e5778e928 100644 --- a/include/asm-x86/gart.h +++ b/include/asm-x86/gart.h @@ -5,6 +5,7 @@ extern void pci_iommu_shutdown(void); extern void no_iommu_init(void); extern int force_iommu, no_iommu; extern int iommu_detected; +extern int agp_amd64_init(void); #ifdef CONFIG_GART_IOMMU extern void gart_iommu_init(void); extern void gart_iommu_shutdown(void); @@ -31,4 +32,24 @@ static inline void gart_iommu_shutdown(void) #endif +/* PTE bits. */ +#define GPTE_VALID 1 +#define GPTE_COHERENT 2 + +/* Aperture control register bits. */ +#define GARTEN (1<<0) +#define DISGARTCPU (1<<4) +#define DISGARTIO (1<<5) + +/* GART cache control register bits. */ +#define INVGART (1<<0) +#define GARTPTEERR (1<<1) + +/* K8 On-cpu GART registers */ +#define AMD64_GARTAPERTURECTL 0x90 +#define AMD64_GARTAPERTUREBASE 0x94 +#define AMD64_GARTTABLEBASE 0x98 +#define AMD64_GARTCACHECTL 0x9c +#define AMD64_GARTEN (1<<0) + #endif -- cgit v1.2.3 From 1edc1ab3f68168ec6815e6d630f38948a6da005a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 13 Apr 2008 01:11:41 -0700 Subject: x86: agp_gart size checking for buggy device while looking at Rafael J. Wysocki's system boot log, I found a funny printout: Node 0: aperture @ de000000 size 32 MB Aperture too small (32 MB) AGP bridge at 00:04:00 Aperture from AGP @ de000000 size 4096 MB (APSIZE 0) Aperture too small (0 MB) Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 4000000 ... agpgart: Detected AGP bridge 20 agpgart: Aperture pointing to RAM agpgart: Aperture from AGP @ de000000 size 4096 MB agpgart: Aperture too small (0 MB) agpgart: No usable aperture found. agpgart: Consider rebooting with iommu=memaper=2 to get a good aperture. it means BIOS allocated the correct gart on the NB and AGP bridge, but because a bug in the silicon (the agp bridge reports the wrong order, it wants 4G instead) the kernel will reject that allocation. Also, because the size is only 32MB, and we try to get another 64M for gart, late fix_northbridge can not revert that change because it still reads the wrong size from agp bridge. So try to double check the order value from the agp bridge, before calling aperture_valid(). [ mingo@elte.hu: 32-bit fix. ] Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 14 ++++++++++++++ drivers/char/agp/amd64-agp.c | 11 +++++++++++ 2 files changed, 25 insertions(+) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 479926d9e004..2e93b3132dff 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -138,6 +138,7 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) int nbits; u32 aper_low, aper_hi; u64 aper; + u32 old_order; printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func); apsizereg = read_pci_config_16(num, slot, func, cap + 0x14); @@ -146,6 +147,9 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) return 0; } + /* old_order could be the value from NB gart setting */ + old_order = *order; + apsize = apsizereg & 0xfff; /* Some BIOS use weird encodings not in the AGPv3 table. */ if (apsize & 0xff) @@ -159,6 +163,16 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) aper_hi = read_pci_config(num, slot, func, 0x14); aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); + /* + * On some sick chips, APSIZE is 0. It means it wants 4G + * so let double check that order, and lets trust AMD NB settings: + */ + if (aper + (32UL<<(20 + *order)) > 0x100000000UL) { + printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n", + 32 << *order, apsizereg); + *order = old_order; + } + printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", aper, 32 << *order, apsizereg); diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 25d64224cdbb..9e3939db76e8 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -312,6 +312,17 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, pci_read_config_dword(agp, 0x10, &aper_low); pci_read_config_dword(agp, 0x14, &aper_hi); aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); + + /* + * On some sick chips APSIZE is 0. This means it wants 4G + * so let double check that order, and lets trust the AMD NB settings + */ + if (aper + (32ULL<<(20 + order)) > 0x100000000ULL) { + printk(KERN_INFO "Aperture size %u MB is not right, using settings from NB\n", + 32 << order); + order = nb_order; + } + printk(KERN_INFO PFX "Aperture from AGP @ %Lx size %u MB\n", aper, 32 << order); if (order < 0 || !aperture_valid(aper, (32*1024*1024)< Date: Sun, 13 Apr 2008 18:42:31 -0700 Subject: x86: checking aperture size order some systems are using 32M for gart and agp when memory is less than 4G. Kernel will reject and try to allcate another 64M that is not needed, and we will waste 64M of perfectly good RAM. this patch adds a workaround by checking aper_base/order between NB and agp bridge. If they are the same, and memory size is less than 4G, it will allow it. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 47 ++++++++++++++++++++++++++++++++----------- drivers/char/agp/amd64-agp.c | 12 +++++------ 2 files changed, 41 insertions(+), 18 deletions(-) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 2e93b3132dff..8c325b7f2d9b 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -83,7 +83,7 @@ static u32 __init allocate_aperture(void) return (u32)__pa(p); } -static int __init aperture_valid(u64 aper_base, u32 aper_size) +static int __init aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) { if (!aper_base) return 0; @@ -96,8 +96,9 @@ static int __init aperture_valid(u64 aper_base, u32 aper_size) printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n"); return 0; } - if (aper_size < 64*1024*1024) { - printk(KERN_ERR "Aperture too small (%d MB)\n", aper_size>>20); + if (aper_size < min_size) { + printk(KERN_ERR "Aperture too small (%d MB) than (%d MB)\n", + aper_size>>20, min_size>>20); return 0; } @@ -167,7 +168,9 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) * On some sick chips, APSIZE is 0. It means it wants 4G * so let double check that order, and lets trust AMD NB settings: */ - if (aper + (32UL<<(20 + *order)) > 0x100000000UL) { + printk(KERN_INFO "Aperture from AGP @ %Lx old size %u MB\n", + aper, 32 << old_order); + if (aper + (32ULL<<(20 + *order)) > 0x100000000ULL) { printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n", 32 << *order, apsizereg); *order = old_order; @@ -176,7 +179,7 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", aper, 32 << *order, apsizereg); - if (!aperture_valid(aper, (32*1024*1024) << *order)) + if (!aperture_valid(aper, (32*1024*1024) << *order, 32<<20)) return 0; return (u32)aper; } @@ -302,8 +305,8 @@ void __init early_gart_iommu_check(void) fix = 1; if (gart_fix_e820 && !fix && aper_enabled) { - if (e820_any_mapped(aper_base, aper_base + aper_size, - E820_RAM)) { + if (!e820_all_mapped(aper_base, aper_base + aper_size, + E820_RESERVED)) { /* reserved it, so we can resuse it in second kernel */ printk(KERN_INFO "update e820 for GART\n"); add_memory_region(aper_base, aper_size, E820_RESERVED); @@ -324,8 +327,11 @@ void __init early_gart_iommu_check(void) } +static int __initdata printed_gart_size_msg; + void __init gart_iommu_hole_init(void) { + u32 agp_aper_base = 0, agp_aper_order = 0; u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u64 aper_base, last_aper_base = 0; int fix, num, valid_agp = 0; @@ -337,6 +343,9 @@ void __init gart_iommu_hole_init(void) printk(KERN_INFO "Checking aperture...\n"); + if (!fallback_aper_force) + agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp); + fix = 0; node = 0; for (num = 24; num < 32; num++) { @@ -355,9 +364,21 @@ void __init gart_iommu_hole_init(void) node, aper_base, aper_size >> 20); node++; - if (!aperture_valid(aper_base, aper_size)) { - fix = 1; - break; + if (!aperture_valid(aper_base, aper_size, 64<<20)) { + if (valid_agp && agp_aper_base && + agp_aper_base == aper_base && + agp_aper_order == aper_order) { + /* the same between two setting from NB and agp */ + if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) { + printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); + printk(KERN_ERR "please increase GART size in your BIOS setup\n"); + printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); + printed_gart_size_msg = 1; + } + } else { + fix = 1; + break; + } } if ((last_aper_order && aper_order != last_aper_order) || @@ -378,8 +399,10 @@ void __init gart_iommu_hole_init(void) return; } - if (!fallback_aper_force) - aper_alloc = search_agp_bridge(&aper_order, &valid_agp); + if (!fallback_aper_force) { + aper_alloc = agp_aper_base; + aper_order = agp_aper_order; + } if (aper_alloc) { /* Got the aperture from the AGP bridge */ diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 9e3939db76e8..9c24470a8252 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -245,11 +245,7 @@ static int __devinit aperture_valid(u64 aper, u32 size) printk(KERN_ERR PFX "No aperture\n"); return 0; } - if (size < 32*1024*1024) { - printk(KERN_ERR PFX "Aperture too small (%d MB)\n", size>>20); - return 0; - } - if ((u64)aper + size > 0x100000000ULL) { + if ((u64)aper + size > 0x100000000ULL) { printk(KERN_ERR PFX "Aperture out of bounds\n"); return 0; } @@ -257,6 +253,10 @@ static int __devinit aperture_valid(u64 aper, u32 size) printk(KERN_ERR PFX "Aperture pointing to RAM\n"); return 0; } + if (size < 32*1024*1024) { + printk(KERN_ERR PFX "Aperture too small (%d MB)\n", size>>20); + return 0; + } /* Request the Aperture. This catches cases when someone else already put a mapping in there - happens with some very broken BIOS @@ -317,7 +317,7 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, * On some sick chips APSIZE is 0. This means it wants 4G * so let double check that order, and lets trust the AMD NB settings */ - if (aper + (32ULL<<(20 + order)) > 0x100000000ULL) { + if (order >=0 && aper + (32ULL<<(20 + order)) > 0x100000000ULL) { printk(KERN_INFO "Aperture size %u MB is not right, using settings from NB\n", 32 << order); order = nb_order; -- cgit v1.2.3 From 7677b2ef6c0c4fddc84f6473f3863f40eb71821b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 14 Apr 2008 20:40:37 -0700 Subject: x86_64: allocate gart aperture from 512M because we try to reserve dma32 early, so we have chance to get aperture from 64M. with some sequence aperture allocated from RAM, could become E820_RESERVED. and then if doing a kexec with a big kernel that uncompressed size is above 64M we could have a range conflict with still using gart. So allocate gart aperture from 512M instead. Also change the fallback_aper_order to 5, because we don't have chance to get 2G or 4G aperture. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 20 +++++++++++++++++--- arch/x86/kernel/pci-dma.c | 6 +++++- 2 files changed, 22 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 8c325b7f2d9b..c63f8d9fad3e 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -55,8 +55,9 @@ static u32 __init allocate_aperture(void) u32 aper_size; void *p; - if (fallback_aper_order > 7) - fallback_aper_order = 7; + /* aper_size should <= 1G */ + if (fallback_aper_order > 5) + fallback_aper_order = 5; aper_size = (32 * 1024 * 1024) << fallback_aper_order; /* @@ -65,7 +66,20 @@ static u32 __init allocate_aperture(void) * memory. Unfortunately we cannot move it up because that would * make the IOMMU useless. */ - p = __alloc_bootmem_nopanic(aper_size, aper_size, 0); + /* + * using 512M as goal, in case kexec will load kernel_big + * that will do the on position decompress, and could overlap with + * that positon with gart that is used. + * sequende: + * kernel_small + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kernel_small(gart area become e820_reserved) + * ==> kexec (with kdump trigger path or previous doesn't shutdown gart) + * ==> kerne_big (uncompressed size will be big than 64M or 128M) + * so don't use 512M below as gart iommu, leave the space for kernel + * code for safe + */ + p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20); if (!p || __pa(p)+aper_size > 0xffffffff) { printk(KERN_ERR "Cannot allocate aperture memory hole (%p,%uK)\n", diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 0c37f16b6950..1a017f00e867 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -77,10 +77,14 @@ void __init dma32_reserve_bootmem(void) if (end_pfn <= MAX_DMA32_PFN) return; + /* + * check aperture_64.c allocate_aperture() for reason about + * using 512M as goal + */ align = 64ULL<<20; size = round_up(dma32_bootmem_size, align); dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align, - __pa(MAX_DMA_ADDRESS)); + 512ULL<<20); if (dma32_bootmem_ptr) dma32_bootmem_size = size; else -- cgit v1.2.3 From 55c0d721df80dcc505dc888e85d4ca51ea150ce9 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 19 Apr 2008 01:31:11 -0700 Subject: x86: clean up aperture_64.c 1. use symbolic register names where appropriate. 2. num to bus or slot changing 3. handle for new opteron for bus other than 0 Signed-off-by: Yinghai Lu Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/aperture_64.c | 230 +++++++++++++++++++++++++----------------- 1 file changed, 139 insertions(+), 91 deletions(-) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index c63f8d9fad3e..02f4dbaa4df4 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -35,6 +35,18 @@ int fallback_aper_force __initdata; int fix_aperture __initdata = 1; +struct bus_dev_range { + int bus; + int dev_base; + int dev_limit; +}; + +static struct bus_dev_range bus_dev_ranges[] __initdata = { + { 0x00, 0x18, 0x20}, + { 0xff, 0x00, 0x20}, + { 0xfe, 0x00, 0x20} +}; + static struct resource gart_resource = { .name = "GART", .flags = IORESOURCE_MEM, @@ -120,33 +132,33 @@ static int __init aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) } /* Find a PCI capability */ -static __u32 __init find_cap(int num, int slot, int func, int cap) +static __u32 __init find_cap(int bus, int slot, int func, int cap) { int bytes; u8 pos; - if (!(read_pci_config_16(num, slot, func, PCI_STATUS) & + if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) & PCI_STATUS_CAP_LIST)) return 0; - pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST); + pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST); for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) { u8 id; pos &= ~3; - id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID); + id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID); if (id == 0xff) break; if (id == cap) return pos; - pos = read_pci_config_byte(num, slot, func, + pos = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_NEXT); } return 0; } /* Read a standard AGPv3 bridge header */ -static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) +static __u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) { u32 apsize; u32 apsizereg; @@ -155,8 +167,8 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) u64 aper; u32 old_order; - printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func); - apsizereg = read_pci_config_16(num, slot, func, cap + 0x14); + printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func); + apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14); if (apsizereg == 0xffffffff) { printk(KERN_ERR "APSIZE in AGP bridge unreadable\n"); return 0; @@ -174,8 +186,8 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) if ((int)*order < 0) /* < 32MB */ *order = 0; - aper_low = read_pci_config(num, slot, func, 0x10); - aper_hi = read_pci_config(num, slot, func, 0x14); + aper_low = read_pci_config(bus, slot, func, 0x10); + aper_hi = read_pci_config(bus, slot, func, 0x14); aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32); /* @@ -213,15 +225,15 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order) */ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) { - int num, slot, func; + int bus, slot, func; /* Poor man's PCI discovery */ - for (num = 0; num < 256; num++) { + for (bus = 0; bus < 256; bus++) { for (slot = 0; slot < 32; slot++) { for (func = 0; func < 8; func++) { u32 class, cap; u8 type; - class = read_pci_config(num, slot, func, + class = read_pci_config(bus, slot, func, PCI_CLASS_REVISION); if (class == 0xffffffff) break; @@ -230,17 +242,17 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) case PCI_CLASS_BRIDGE_HOST: case PCI_CLASS_BRIDGE_OTHER: /* needed? */ /* AGP bridge? */ - cap = find_cap(num, slot, func, + cap = find_cap(bus, slot, func, PCI_CAP_ID_AGP); if (!cap) break; *valid_agp = 1; - return read_agp(num, slot, func, cap, + return read_agp(bus, slot, func, cap, order); } /* No multi-function device? */ - type = read_pci_config_byte(num, slot, func, + type = read_pci_config_byte(bus, slot, func, PCI_HEADER_TYPE); if (!(type & 0x80)) break; @@ -280,38 +292,49 @@ void __init early_gart_iommu_check(void) * or BIOS forget to put that in reserved. * try to update e820 to make that region as reserved. */ - int fix, num; + int fix, slot; u32 ctl; u32 aper_size = 0, aper_order = 0, last_aper_order = 0; u64 aper_base = 0, last_aper_base = 0; int aper_enabled = 0, last_aper_enabled = 0; + int i; if (!early_pci_allowed()) return; fix = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - ctl = read_pci_config(0, num, 3, 0x90); - aper_enabled = ctl & 1; - aper_order = (ctl >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; - - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base) || - (last_aper_enabled && aper_enabled != last_aper_enabled)) { - fix = 1; - break; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + aper_enabled = ctl & AMD64_GARTEN; + aper_order = (ctl >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + if ((last_aper_order && aper_order != last_aper_order) || + (last_aper_base && aper_base != last_aper_base) || + (last_aper_enabled && aper_enabled != last_aper_enabled)) { + fix = 1; + goto out; + } + last_aper_order = aper_order; + last_aper_base = aper_base; + last_aper_enabled = aper_enabled; } - last_aper_order = aper_order; - last_aper_base = aper_base; - last_aper_enabled = aper_enabled; } +out: if (!fix && !aper_enabled) return; @@ -330,13 +353,22 @@ void __init early_gart_iommu_check(void) } /* different nodes have different setting, disable them all at first*/ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; - ctl = read_pci_config(0, num, 3, 0x90); - ctl &= ~1; - write_pci_config(0, num, 3, 0x90, ctl); + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL); + ctl &= ~AMD64_GARTEN; + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl); + } } } @@ -348,8 +380,8 @@ void __init gart_iommu_hole_init(void) u32 agp_aper_base = 0, agp_aper_order = 0; u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0; u64 aper_base, last_aper_base = 0; - int fix, num, valid_agp = 0; - int node; + int fix, slot, valid_agp = 0; + int i, node; if (gart_iommu_aperture_disabled || !fix_aperture || !early_pci_allowed()) @@ -362,48 +394,58 @@ void __init gart_iommu_hole_init(void) fix = 0; node = 0; - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - iommu_detected = 1; - gart_iommu_aperture = 1; - - aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7; - aper_size = (32 * 1024 * 1024) << aper_order; - aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff; - aper_base <<= 25; - - printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", - node, aper_base, aper_size >> 20); - node++; - - if (!aperture_valid(aper_base, aper_size, 64<<20)) { - if (valid_agp && agp_aper_base && - agp_aper_base == aper_base && - agp_aper_order == aper_order) { - /* the same between two setting from NB and agp */ - if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) { - printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); - printk(KERN_ERR "please increase GART size in your BIOS setup\n"); - printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); - printed_gart_size_msg = 1; + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + iommu_detected = 1; + gart_iommu_aperture = 1; + + aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7; + aper_size = (32 * 1024 * 1024) << aper_order; + aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; + aper_base <<= 25; + + printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", + node, aper_base, aper_size >> 20); + node++; + + if (!aperture_valid(aper_base, aper_size, 64<<20)) { + if (valid_agp && agp_aper_base && + agp_aper_base == aper_base && + agp_aper_order == aper_order) { + /* the same between two setting from NB and agp */ + if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) { + printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); + printk(KERN_ERR "please increase GART size in your BIOS setup\n"); + printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); + printed_gart_size_msg = 1; + } + } else { + fix = 1; + goto out; } - } else { - fix = 1; - break; } - } - if ((last_aper_order && aper_order != last_aper_order) || - (last_aper_base && aper_base != last_aper_base)) { - fix = 1; - break; + if ((last_aper_order && aper_order != last_aper_order) || + (last_aper_base && aper_base != last_aper_base)) { + fix = 1; + goto out; + } + last_aper_order = aper_order; + last_aper_base = aper_base; } - last_aper_order = aper_order; - last_aper_base = aper_base; } +out: if (!fix && !fallback_aper_force) { if (last_aper_base) { unsigned long n = (32 * 1024 * 1024) << last_aper_order; @@ -452,16 +494,22 @@ void __init gart_iommu_hole_init(void) } /* Fix up the north bridges */ - for (num = 24; num < 32; num++) { - if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00))) - continue; - - /* - * Don't enable translation yet. That is done later. - * Assume this BIOS didn't initialise the GART so - * just overwrite all previous bits - */ - write_pci_config(0, num, 3, 0x90, aper_order<<1); - write_pci_config(0, num, 3, 0x94, aper_alloc>>25); + for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { + int bus; + int dev_base, dev_limit; + + bus = bus_dev_ranges[i].bus; + dev_base = bus_dev_ranges[i].dev_base; + dev_limit = bus_dev_ranges[i].dev_limit; + for (slot = dev_base; slot < dev_limit; slot++) { + if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00))) + continue; + + /* Don't enable translation yet. That is done later. + Assume this BIOS didn't initialise the GART so + just overwrite all previous bits */ + write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, aper_order << 1); + write_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE, aper_alloc >> 25); + } } } -- cgit v1.2.3 From 330fce23dab6e6a3d1979e55f27aba4c0c301331 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 19 Apr 2008 01:31:45 -0700 Subject: x86: reserve dma32 early for gart fix we can use free_bootmem() directly. Signed-off-by: Yinghai Lu Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/pci-dma.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 1a017f00e867..81862d0c7a9a 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -92,7 +92,6 @@ void __init dma32_reserve_bootmem(void) } static void __init dma32_free_bootmem(void) { - int node; if (end_pfn <= MAX_DMA32_PFN) return; @@ -100,9 +99,7 @@ static void __init dma32_free_bootmem(void) if (!dma32_bootmem_ptr) return; - for_each_online_node(node) - free_bootmem_node(NODE_DATA(node), __pa(dma32_bootmem_ptr), - dma32_bootmem_size); + free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size); dma32_bootmem_ptr = NULL; dma32_bootmem_size = 0; -- cgit v1.2.3 From 3bb6fbf9969a8bbe4892968659239273d092e78a Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 15 Apr 2008 12:43:57 +0200 Subject: x86 gart: factor out common code Cleanup gart handling on amd64 a bit: move common code into enable_gart_translation , and use symbolic register names where appropriate. Signed-off-by: Pavel Machek Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/pci-gart_64.c | 23 ++++++----------------- drivers/char/agp/amd64-agp.c | 29 +++++++++-------------------- include/asm-x86/gart.h | 17 +++++++++++++++++ 3 files changed, 32 insertions(+), 37 deletions(-) diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index bffcf455c857..1f99b62ff616 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -533,8 +533,8 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) unsigned aper_size = 0, aper_base_32, aper_order; u64 aper_base; - pci_read_config_dword(dev, 0x94, &aper_base_32); - pci_read_config_dword(dev, 0x90, &aper_order); + pci_read_config_dword(dev, AMD64_GARTAPERTUREBASE, &aper_base_32); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &aper_order); aper_order = (aper_order >> 1) & 7; aper_base = aper_base_32 & 0x7fff; @@ -592,19 +592,8 @@ static __init int init_k8_gatt(struct agp_kern_info *info) agp_gatt_table = gatt; for (i = 0; i < num_k8_northbridges; i++) { - u32 gatt_reg; - u32 ctl; - dev = k8_northbridges[i]; - gatt_reg = __pa(gatt) >> 12; - gatt_reg <<= 4; - pci_write_config_dword(dev, AMD64_GARTTABLEBASE, gatt_reg); - pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - - ctl |= GARTEN; - ctl &= ~(DISGARTCPU | DISGARTIO); - - pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); + enable_gart_translation(dev, __pa(gatt)); } flush_gart(); @@ -648,11 +637,11 @@ void gart_iommu_shutdown(void) u32 ctl; dev = k8_northbridges[i]; - pci_read_config_dword(dev, 0x90, &ctl); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); - ctl &= ~1; + ctl &= ~GARTEN; - pci_write_config_dword(dev, 0x90, ctl); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } } diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 9c24470a8252..e3c7ea07f57c 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -150,25 +150,14 @@ static u64 amd64_configure(struct pci_dev *hammer, u64 gatt_table) { u64 aperturebase; u32 tmp; - u64 addr, aper_base; + u64 aper_base; /* Address to map to */ - pci_read_config_dword (hammer, AMD64_GARTAPERTUREBASE, &tmp); + pci_read_config_dword(hammer, AMD64_GARTAPERTUREBASE, &tmp); aperturebase = tmp << 25; aper_base = (aperturebase & PCI_BASE_ADDRESS_MEM_MASK); - /* address of the mappings table */ - addr = (u64) gatt_table; - addr >>= 12; - tmp = (u32) addr<<4; - tmp &= ~0xf; - pci_write_config_dword(hammer, AMD64_GARTTABLEBASE, tmp); - - /* Enable GART translation for this hammer. */ - pci_read_config_dword(hammer, AMD64_GARTAPERTURECTL, &tmp); - tmp |= GARTEN; - tmp &= ~(DISGARTCPU | DISGARTIO); - pci_write_config_dword(hammer, AMD64_GARTAPERTURECTL, tmp); + enable_gart_translation(hammer, gatt_table); return aper_base; } @@ -207,9 +196,9 @@ static void amd64_cleanup(void) for (i = 0; i < num_k8_northbridges; i++) { struct pci_dev *dev = k8_northbridges[i]; /* disable gart translation */ - pci_read_config_dword (dev, AMD64_GARTAPERTURECTL, &tmp); + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &tmp); tmp &= ~AMD64_GARTEN; - pci_write_config_dword (dev, AMD64_GARTAPERTURECTL, tmp); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, tmp); } } @@ -289,9 +278,9 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, u32 nb_order, nb_base; u16 apsize; - pci_read_config_dword(nb, 0x90, &nb_order); + pci_read_config_dword(nb, AMD64_GARTAPERTURECTL, &nb_order); nb_order = (nb_order >> 1) & 7; - pci_read_config_dword(nb, 0x94, &nb_base); + pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base); nb_aper = nb_base << 25; if (aperture_valid(nb_aper, (32*1024*1024)<> 25); + pci_write_config_dword(nb, AMD64_GARTAPERTURECTL, order << 1); + pci_write_config_dword(nb, AMD64_GARTAPERTUREBASE, aper >> 25); return 0; } diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h index 248e5778e928..6f22786d2f0c 100644 --- a/include/asm-x86/gart.h +++ b/include/asm-x86/gart.h @@ -52,4 +52,21 @@ static inline void gart_iommu_shutdown(void) #define AMD64_GARTCACHECTL 0x9c #define AMD64_GARTEN (1<<0) +static inline void enable_gart_translation(struct pci_dev *dev, u64 addr) +{ + u32 tmp, ctl; + + /* address of the mappings table */ + addr >>= 12; + tmp = (u32) addr<<4; + tmp &= ~0xf; + pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp); + + /* Enable GART translation for this hammer. */ + pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl); + ctl |= GARTEN; + ctl &= ~(DISGARTCPU | DISGARTIO); + pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); +} + #endif -- cgit v1.2.3 From f784946ded3e734524d1f48a6a8286b8a152c3b9 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Fri, 2 May 2008 16:45:08 -0700 Subject: x86: use per_cpu data in nmi_32 use per_cpu for per CPU data. Signed-off-by: Hiroshi Shimamoto Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/nmi_32.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 11b14bbaa61e..69bdae555c18 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -293,9 +293,9 @@ void stop_apic_nmi_watchdog(void *unused) * here too!] */ -static unsigned int - last_irq_sums [NR_CPUS], - alert_counter [NR_CPUS]; +static DEFINE_PER_CPU(unsigned, last_irq_sum); +static DEFINE_PER_CPU(local_t, alert_counter); +static DEFINE_PER_CPU(int, nmi_touch); void touch_nmi_watchdog(void) { @@ -303,12 +303,13 @@ void touch_nmi_watchdog(void) unsigned cpu; /* - * Just reset the alert counters, (other CPUs might be - * spinning on locks we hold): + * Tell other CPUs to reset their alert counters. We cannot + * do it ourselves because the alert count increase is not + * atomic. */ for_each_present_cpu(cpu) { - if (alert_counter[cpu]) - alert_counter[cpu] = 0; + if (per_cpu(nmi_touch, cpu) != 1) + per_cpu(nmi_touch, cpu) = 1; } } @@ -358,22 +359,26 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) */ sum = per_cpu(irq_stat, cpu).apic_timer_irqs + per_cpu(irq_stat, cpu).irq0_irqs; + if (__get_cpu_var(nmi_touch)) { + __get_cpu_var(nmi_touch) = 0; + touched = 1; + } /* if the none of the timers isn't firing, this cpu isn't doing much */ - if (!touched && last_irq_sums[cpu] == sum) { + if (!touched && __get_cpu_var(last_irq_sum) == sum) { /* * Ayiee, looks like this CPU is stuck ... * wait a few IRQs (5 seconds) before doing the oops ... */ - alert_counter[cpu]++; - if (alert_counter[cpu] == 5*nmi_hz) + local_inc(&__get_cpu_var(alert_counter)); + if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) /* * die_nmi will return ONLY if NOTIFY_STOP happens.. */ die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP"); } else { - last_irq_sums[cpu] = sum; - alert_counter[cpu] = 0; + __get_cpu_var(last_irq_sum) = sum; + local_set(&__get_cpu_var(alert_counter), 0); } /* see if the nmi watchdog went off */ if (!__get_cpu_var(wd_enabled)) -- cgit v1.2.3 From f59a9310b97879159ef4d25227bc270278f1ee71 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Fri, 2 May 2008 16:44:52 -0700 Subject: x86: nmi and irq counters are unsigned in nmi_64.c __nmi_count, apic_timer_irqs and irq0_irqs are unsigned. Signed-off-by: Hiroshi Shimamoto Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/nmi_64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 5a29ded994fa..33cb8ecbb6dd 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -79,7 +79,7 @@ static __init void nmi_cpu_busy(void *data) int __init check_nmi_watchdog(void) { - int *prev_nmi_count; + unsigned int *prev_nmi_count; int cpu; if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) @@ -316,7 +316,7 @@ EXPORT_SYMBOL(touch_nmi_watchdog); notrace __kprobes int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) { - int sum; + unsigned int sum; int touched = 0; int cpu = smp_processor_id(); int rc = 0; -- cgit v1.2.3 From 622e3f28e50fe30cc199c735440cd7c75e0033b0 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sun, 4 May 2008 19:57:19 +0400 Subject: x86: 64-bit defconfig remake The current x86_64_defconfig contains a number of nonexistent symbols. Lets fix it. Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/configs/x86_64_defconfig | 627 ++++++++++++++++++++------------------ 1 file changed, 328 insertions(+), 299 deletions(-) diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 2d6f5b2809d2..2f1b35664998 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1,48 +1,65 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-git14 -# Fri Jul 20 09:53:15 2007 +# Linux kernel version: 2.6.26-rc1 +# Sun May 4 19:27:29 2008 # -CONFIG_X86_64=y CONFIG_64BIT=y +# CONFIG_X86_32 is not set +CONFIG_X86_64=y CONFIG_X86=y +CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig" +# CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_ZONE_DMA32=y +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y -CONFIG_QUICKLIST=y -CONFIG_NR_QUICK=2 -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_X86_CMPXCHG=y -CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_DMI=y -CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_HWEIGHT=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ZONE_DMA32=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_AUDIT_ARCH=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_64_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y +# CONFIG_KTIME_SCALAR is not set # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -51,14 +68,21 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CPUSETS is not set -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +# CONFIG_CGROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +# CONFIG_USER_NS is not set +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -66,6 +90,7 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -73,6 +98,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -85,6 +111,17 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -98,6 +135,7 @@ CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -111,107 +149,169 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Processor type and features # +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_SMP=y CONFIG_X86_PC=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_SUMMIT is not set +# CONFIG_X86_BIGSMP is not set +# CONFIG_X86_VISWS is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_ES7000 is not set +# CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set +# CONFIG_PARAVIRT_GUEST is not set +# CONFIG_MEMTEST_BOOTPARAM is not set +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set # CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +# CONFIG_MGEODEGX1 is not set +# CONFIG_MGEODE_LX is not set +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set CONFIG_GENERIC_CPU=y +CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_INTERNODE_CACHE_BYTES=128 -CONFIG_X86_TSC=y +CONFIG_X86_CMPXCHG=y +CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_GOOD_APIC=y -# CONFIG_MICROCODE is not set -CONFIG_X86_MSR=y -CONFIG_X86_CPUID=y -CONFIG_X86_HT=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_LOCAL_APIC=y -CONFIG_MTRR=y -CONFIG_SMP=y +CONFIG_X86_TSC=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=64 +CONFIG_X86_DEBUGCTLMSR=y +CONFIG_HPET_TIMER=y +CONFIG_HPET_EMULATE_RTC=y +CONFIG_DMI=y +CONFIG_GART_IOMMU=y +# CONFIG_CALGARY_IOMMU is not set +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +CONFIG_NR_CPUS=32 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_MCE=y +CONFIG_X86_MCE_INTEL=y +CONFIG_X86_MCE_AMD=y +# CONFIG_I8K is not set +# CONFIG_MICROCODE is not set +CONFIG_X86_MSR=y +CONFIG_X86_CPUID=y CONFIG_NUMA=y CONFIG_K8_NUMA=y -CONFIG_NODES_SHIFT=6 CONFIG_X86_64_ACPI_NUMA=y +CONFIG_NODES_SPAN_OTHER_NODES=y CONFIG_NUMA_EMU=y +CONFIG_NODES_SHIFT=6 +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +# CONFIG_SPARSEMEM_VMEMMAP is not set + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y -CONFIG_NR_CPUS=32 -CONFIG_PHYSICAL_ALIGN=0x200000 -CONFIG_HOTPLUG_CPU=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_HPET_TIMER=y -CONFIG_HPET_EMULATE_RTC=y -CONFIG_GART_IOMMU=y -# CONFIG_CALGARY_IOMMU is not set -CONFIG_SWIOTLB=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_START=0x200000 +CONFIG_MTRR=y +# CONFIG_X86_PAT is not set +# CONFIG_EFI is not set CONFIG_SECCOMP=y -# CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -CONFIG_K8_NB=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ISA_DMA_API=y -CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_SCHED_HRTICK=y +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PHYSICAL_START=0x200000 +# CONFIG_RELOCATABLE is not set +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_HOTPLUG_CPU=y +# CONFIG_COMPAT_VDSO is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # # Power management options # +CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +# CONFIG_SUSPEND is not set CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" - -# -# ACPI (Advanced Configuration and Power Interface) Support -# CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SLEEP_PROC_FS=y -CONFIG_ACPI_SLEEP_PROC_SLEEP=y CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y -# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_DOCK=y +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y +# CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set +# CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y @@ -230,7 +330,10 @@ CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -240,16 +343,19 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # CPUFreq processor drivers # +CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_POWERNOW_K8=y CONFIG_X86_POWERNOW_K8_ACPI=y # CONFIG_X86_SPEEDSTEP_CENTRINO is not set -CONFIG_X86_ACPI_CPUFREQ=y +CONFIG_X86_P4_CLOCKMOD=y # # shared options # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y -# CONFIG_X86_SPEEDSTEP_LIB is not set +CONFIG_X86_SPEEDSTEP_LIB=y +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y # # Bus options (PCI etc.) @@ -257,16 +363,18 @@ CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y +CONFIG_PCI_DOMAINS=y +# CONFIG_DMAR is not set CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_HT_IRQ is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_ISA_DMA_API=y +CONFIG_K8_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -274,10 +382,12 @@ CONFIG_PCI_MSI=y # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y # @@ -313,6 +423,7 @@ CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -334,8 +445,10 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -352,10 +465,6 @@ CONFIG_IPV6_SIT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -364,6 +473,7 @@ CONFIG_IPV6_SIT=y # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -385,6 +495,7 @@ CONFIG_IPV6_SIT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -416,7 +527,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -427,17 +538,20 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set +# CONFIG_INTEL_MENLOW is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set @@ -449,18 +563,21 @@ CONFIG_IDE_PROC_FS=y # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y @@ -487,9 +604,8 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -528,105 +644,16 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set -CONFIG_SCSI_SAS_ATTRS=y # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -CONFIG_SCSI_AIC79XX=y -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=4000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y +# CONFIG_SATA_PMP is not set CONFIG_SATA_AHCI=y -CONFIG_SATA_SVW=y -CONFIG_ATA_PIIX=y -# CONFIG_SATA_MV is not set -CONFIG_SATA_NV=y -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y # CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -CONFIG_SATA_VIA=y -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set +# CONFIG_ATA_SFF is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_DM=y @@ -637,16 +664,14 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# +# CONFIG_DM_UEVENT is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=y # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set +# CONFIG_FUSION_LOGGING is not set # # IEEE 1394 (FireWire) support @@ -687,6 +712,7 @@ CONFIG_NETDEVICES_MULTIQUEUE=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y +# CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set @@ -709,15 +735,21 @@ CONFIG_TULIP=y # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set CONFIG_AMD8111_ETH=y # CONFIG_AMD8111E_NAPI is not set # CONFIG_ADAPTEC_STARFIRE is not set CONFIG_B44=y +CONFIG_B44_PCI_AUTOSELECT=y +CONFIG_B44_PCICORE_AUTOSELECT=y +CONFIG_B44_PCI=y CONFIG_FORCEDETH=y # CONFIG_FORCEDETH_NAPI is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set @@ -729,6 +761,7 @@ CONFIG_8139TOO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -740,6 +773,10 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -755,12 +792,17 @@ CONFIG_BNX2=y CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -768,6 +810,8 @@ CONFIG_S2IO=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -776,7 +820,6 @@ CONFIG_S2IO=m # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -784,8 +827,8 @@ CONFIG_S2IO=m # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y @@ -807,7 +850,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -856,7 +898,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -880,7 +924,6 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y CONFIG_HW_RANDOM_AMD=y @@ -888,12 +931,6 @@ CONFIG_HW_RANDOM_AMD=y CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -CONFIG_AGP=y -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=y -# CONFIG_AGP_SIS is not set -# CONFIG_AGP_VIA is not set -# CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set CONFIG_RAW_DRIVER=y @@ -906,40 +943,69 @@ CONFIG_HPET_MMAP=y # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +CONFIG_SSB=y +CONFIG_SSB_SPROM=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_B43_PCI_BRIDGE is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # +CONFIG_AGP=y +CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=y +# CONFIG_AGP_SIS is not set +# CONFIG_AGP_VIA is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support @@ -971,6 +1037,7 @@ CONFIG_SOUND_PRIME=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +CONFIG_HIDRAW=y # # USB Input Devices @@ -985,6 +1052,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -993,18 +1061,19 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -1036,7 +1105,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1049,10 +1120,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1078,55 +1145,20 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# +CONFIG_DMADEVICES=y # # DMA Devices # -CONFIG_VIRTUALIZATION=y -# CONFIG_KVM is not set - -# -# Userspace I/O -# +# CONFIG_INTEL_IOATDMA is not set # CONFIG_UIO is not set # @@ -1136,6 +1168,7 @@ CONFIG_VIRTUALIZATION=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y +# CONFIG_ISCSI_IBFT_FIND is not set # # File systems @@ -1164,12 +1197,10 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1204,7 +1235,6 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1219,48 +1249,19 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1301,25 +1302,16 @@ CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Instrumentation Support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y @@ -1330,6 +1322,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1344,28 +1337,64 @@ CONFIG_TIMER_STATS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set -CONFIG_OPTIMIZE_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_RODATA is not set -# CONFIG_IOMMU_DEBUG is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +# CONFIG_SAMPLES is not set +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_NONPROMISC_DEVMEM is not set +CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_PER_CPU_MAPS is not set +# CONFIG_X86_PTDUMP is not set +# CONFIG_DEBUG_RODATA is not set +# CONFIG_DIRECT_GBPAGES is not set +# CONFIG_DEBUG_NX_TEST is not set +CONFIG_X86_MPPARSE=y +# CONFIG_IOMMU_DEBUG is not set +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +# CONFIG_DEBUG_BOOT_PARAMS is not set +# CONFIG_CPA_DEBUG is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_HAVE_KVM is not set +# CONFIG_VIRTUALIZATION is not set +# CONFIG_KVM is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set -- cgit v1.2.3 From b5d958ea66ac11b1190c24f042f517adf9229a98 Mon Sep 17 00:00:00 2001 From: Auke Kok Date: Wed, 9 Apr 2008 13:17:39 -0700 Subject: e1000e: set CONFIG_E1000E=y in x86 defconfigs This adds to the already default CONFIG_E1000=y in these files. Signed-off-by: Auke Kok Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/configs/i386_defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index ad7ddaaff588..73f2c3cb7cda 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -814,6 +814,10 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +CONFIG_E1000E=y +CONFIG_E1000E_ENABLED=y +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -- cgit v1.2.3 From 5cb04df8d3f03e37a19f2502591a84156be71772 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 4 May 2008 19:49:04 +0200 Subject: x86: defconfig updates refresh 32-bit defconfig too, and update the 64-bit configs as well, the defconfig should be much more useful by default, so most of the updates are the enabling of various options. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/configs/i386_defconfig | 1711 ++++++++++++++++++++++++++----------- arch/x86/configs/x86_64_defconfig | 1378 ++++++++++++++++++++++------- 2 files changed, 2291 insertions(+), 798 deletions(-) diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 73f2c3cb7cda..9bc34e2033ec 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -1,54 +1,103 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-git14 -# Fri Jul 20 09:53:15 2007 +# Linux kernel version: 2.6.26-rc1 +# Sun May 4 19:59:02 2008 # +# CONFIG_64BIT is not set CONFIG_X86_32=y +# CONFIG_X86_64 is not set +CONFIG_X86=y +CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig" +# CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y -CONFIG_SEMAPHORE_SLEEPERS=y -CONFIG_X86=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y -CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y +# CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_DMI=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +# CONFIG_RWSEM_GENERIC_SPINLOCK is not set +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME_VSYSCALL is not set +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ZONE_DMA32 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_AUDIT_ARCH is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_X86_SMP=y +CONFIG_X86_32_SMP=y +CONFIG_X86_HT=y +CONFIG_X86_BIOS_REBOOT=y +CONFIG_X86_TRAMPOLINE=y +CONFIG_KTIME_SCALAR=y # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CPUSETS is not set -CONFIG_SYSFS_DEPRECATED=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +# CONFIG_CGROUP_MEM_RES_CTLR is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_PROC_PID_CPUSET=y CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -56,13 +105,15 @@ CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -76,6 +127,17 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_MARKERS=y +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -87,10 +149,10 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LBD is not set +CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLK_DEV_BSG=y # # IO Schedulers @@ -103,7 +165,8 @@ CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Processor type and features @@ -111,18 +174,21 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y -# CONFIG_X86_PC is not set +CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set -CONFIG_X86_GENERICARCH=y +# CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set -# CONFIG_PARAVIRT is not set -CONFIG_X86_CYCLONE_TIMER=y +# CONFIG_X86_RDC321X is not set +# CONFIG_X86_VSMP is not set +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_PARAVIRT_GUEST is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set @@ -130,9 +196,8 @@ CONFIG_X86_CYCLONE_TIMER=y # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set -CONFIG_MPENTIUMIII=y +# CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set -# CONFIG_MCORE2 is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set @@ -147,14 +212,14 @@ CONFIG_MPENTIUMIII=y # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set -CONFIG_X86_GENERIC=y +# CONFIG_MPSC is not set +CONFIG_MCORE2=y +# CONFIG_GENERIC_CPU is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_CPU=y CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y @@ -162,106 +227,120 @@ CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=4 +CONFIG_X86_MINIMUM_CPU_FAMILY=6 +CONFIG_X86_DEBUGCTLMSR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y -CONFIG_NR_CPUS=32 -CONFIG_SCHED_SMT=y +CONFIG_DMI=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_NR_CPUS=4 +# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_NONFATAL=y -CONFIG_X86_MCE_P4THERMAL=y +# CONFIG_X86_MCE is not set CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set -CONFIG_MICROCODE=y -CONFIG_MICROCODE_OLD_INTERFACE=y +# CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y - -# -# Firmware Drivers -# -# CONFIG_EDD is not set -# CONFIG_DELL_RBU is not set -# CONFIG_DCDBAS is not set -CONFIG_DMIID=y # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_HIGHMEM=y -CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_NEED_NODE_MEMMAP_SIZE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y +# CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set + +# +# Memory hotplug is currently incompatible with Software Suspend +# +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y -CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y -# CONFIG_EFI is not set +# CONFIG_X86_PAT is not set +CONFIG_EFI=y # CONFIG_IRQBALANCE is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x100000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x100000 -# CONFIG_HOTPLUG_CPU is not set -CONFIG_COMPAT_VDSO=y +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_HOTPLUG_CPU=y +# CONFIG_COMPAT_VDSO is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # -# Power management options (ACPI, APM) +# Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y -# CONFIG_PM_DEBUG is not set - -# -# ACPI (Advanced Configuration and Power Interface) Support -# +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_TRACE=y +CONFIG_PM_TRACE_RTC=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROCFS_POWER=y +CONFIG_ACPI_SYSFS_POWER=y +CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y -# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_DOCK=y +# CONFIG_ACPI_BAY is not set CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set -CONFIG_ACPI_BLACKLIST_YEAR=2001 -CONFIG_ACPI_DEBUG=y +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ACPI_BLACKLIST_YEAR=0 +# CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y -# CONFIG_ACPI_CONTAINER is not set +CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # CONFIG_APM is not set @@ -271,15 +350,17 @@ CONFIG_X86_PM_TIMER=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_STAT is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers @@ -287,8 +368,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_X86_ACPI_CPUFREQ=y # CONFIG_X86_POWERNOW_K6 is not set # CONFIG_X86_POWERNOW_K7 is not set -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_POWERNOW_K8_ACPI=y +# CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_GX_SUSPMOD is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_SPEEDSTEP_ICH is not set @@ -302,43 +382,72 @@ CONFIG_X86_POWERNOW_K8_ACPI=y # # shared options # -CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y +# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y +# CONFIG_PCI_GOOLPC is not set CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y -# CONFIG_PCIEPORTBUS is not set +CONFIG_PCI_DOMAINS=y +CONFIG_PCIEPORTBUS=y +# CONFIG_HOTPLUG_PCI_PCIE is not set +CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set -# CONFIG_HT_IRQ is not set +CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set +# CONFIG_OLPC is not set CONFIG_K8_NB=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_IBM is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=y # # Networking @@ -349,59 +458,142 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set +CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set +CONFIG_TCP_MD5SIG=y +# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y -# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +# CONFIG_IPV6_MROUTE is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_FTP=y +CONFIG_NF_CONNTRACK_IRC=y +CONFIG_NF_CONNTRACK_SIP=y +CONFIG_NF_CT_NETLINK=y +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_MARK=y +CONFIG_NETFILTER_XT_TARGET_NFLOG=y +CONFIG_NETFILTER_XT_TARGET_SECMARK=y +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y +CONFIG_NETFILTER_XT_TARGET_TCPMSS=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +CONFIG_NETFILTER_XT_MATCH_MARK=y +CONFIG_NETFILTER_XT_MATCH_POLICY=y +CONFIG_NETFILTER_XT_MATCH_STATE=y + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +CONFIG_IP_NF_TARGET_ULOG=y +CONFIG_NF_NAT=y +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_NF_NAT_FTP=y +CONFIG_NF_NAT_IRC=y +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=y +CONFIG_IP_NF_MANGLE=y + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=y +CONFIG_IP6_NF_IPTABLES=y +CONFIG_IP6_NF_MATCH_IPV6HEADER=y +CONFIG_IP6_NF_FILTER=y +CONFIG_IP6_NF_TARGET_LOG=y +CONFIG_IP6_NF_TARGET_REJECT=y +CONFIG_IP6_NF_MANGLE=y # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -409,6 +601,7 @@ CONFIG_IPV6_SIT=y # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set +CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -416,28 +609,99 @@ CONFIG_IPV6_SIT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_NBYTE is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_TEXT is not set +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set -# CONFIG_HAMRADIO is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +# CONFIG_AX25 is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y # # Wireless # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -449,13 +713,15 @@ CONFIG_IPV6_SIT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y @@ -466,7 +732,7 @@ CONFIG_PNP=y # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -479,8 +745,8 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y @@ -489,73 +755,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ACER_WMI is not set +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_TC1100_WMI is not set +# CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -# CONFIG_BLK_DEV_HD_IDE is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_IDEPNP is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_RZ1000 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -# CONFIG_BLK_DEV_ATIIXP is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_CS5535 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_INTEL_MENLOW is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support @@ -564,8 +774,8 @@ CONFIG_BLK_DEV_IDEDMA=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) @@ -574,7 +784,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set @@ -582,7 +792,7 @@ CONFIG_CHR_DEV_SG=y # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set +CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m @@ -591,81 +801,37 @@ CONFIG_SCSI_WAIT_SCAN=m # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -CONFIG_BLK_DEV_3W_XXXX_RAID=y -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -CONFIG_SCSI_AIC7XXX=y -CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 -CONFIG_AIC7XXX_RESET_DELAY_MS=5000 -CONFIG_AIC7XXX_DEBUG_ENABLE=y -CONFIG_AIC7XXX_DEBUG_MASK=0 -CONFIG_AIC7XXX_REG_PRETTY_PRINT=y -# CONFIG_SCSI_AIC7XXX_OLD is not set -CONFIG_SCSI_AIC79XX=y -CONFIG_AIC79XX_CMDS_PER_DEVICE=32 -CONFIG_AIC79XX_RESET_DELAY_MS=4000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y -CONFIG_SATA_SVW=y +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set -CONFIG_SATA_NV=y +# CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set -CONFIG_SATA_VIA=y +# CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set +CONFIG_PATA_AMD=y # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set @@ -673,6 +839,7 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5535 is not set +# CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set @@ -686,11 +853,14 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set +CONFIG_PATA_OLDPIIX=y # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -702,65 +872,42 @@ CONFIG_SATA_VIA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_MD=y +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set - -# -# Fusion MPT device support -# -CONFIG_FUSION=y -CONFIG_FUSION_SPI=y -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set -CONFIG_FUSION_MAX_SGE=128 -# CONFIG_FUSION_CTL is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# - -# -# Texas Instruments PCILynx requires I2C -# -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -# CONFIG_IEEE1394_VIDEO1394 is not set -# CONFIG_IEEE1394_SBP2 is not set -# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y -# CONFIG_MAC_EMUMOUSEBTN is not set +CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -CONFIG_NETDEVICES_MULTIQUEUE=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set @@ -770,38 +917,40 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y +# CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set -CONFIG_TULIP=y -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set +# CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set +# CONFIG_PCMCIA_XIRCOM is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -CONFIG_B44=y +# CONFIG_B44 is not set CONFIG_FORCEDETH=y # CONFIG_FORCEDETH_NAPI is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -CONFIG_8139CP=y +# CONFIG_8139CP is not set CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -814,38 +963,75 @@ CONFIG_NETDEV_1000=y CONFIG_E1000=y # CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -CONFIG_E1000E=y -CONFIG_E1000E_ENABLED=y +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set -CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set +# CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y -CONFIG_BNX2=y +# CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set -# CONFIG_TR is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set +CONFIG_TR=y +# CONFIG_IBMOL is not set +# CONFIG_IBMLS is not set +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +CONFIG_ATH5K=y +# CONFIG_ATH5K_DEBUG is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWLCORE is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # # USB Network Adapters @@ -854,16 +1040,27 @@ CONFIG_NETDEV_10000=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_PCMCIA_IBMTR is not set # CONFIG_WAN is not set -# CONFIG_FDDI is not set +CONFIG_FDDI=y +# CONFIG_DEFXX is not set +# CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y @@ -874,18 +1071,17 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -910,17 +1106,63 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_JOYSTICK_XPAD is not set +CONFIG_INPUT_TABLET=y +# CONFIG_TABLET_USB_ACECAD is not set +# CONFIG_TABLET_USB_AIPTEK is not set +# CONFIG_TABLET_USB_GTCO is not set +# CONFIG_TABLET_USB_KBTAB is not set +# CONFIG_TABLET_USB_WACOM is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_APANEL is not set +# CONFIG_INPUT_WISTRON_BTNS is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y @@ -933,8 +1175,26 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -944,9 +1204,14 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support @@ -955,89 +1220,275 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_INTEL=y -CONFIG_HW_RANDOM_AMD=y +# CONFIG_HW_RANDOM_INTEL is not set +# CONFIG_HW_RANDOM_AMD is not set CONFIG_HW_RANDOM_GEODE=y CONFIG_HW_RANDOM_VIA=y -# CONFIG_NVRAM is not set -CONFIG_RTC=y +CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set -CONFIG_AGP=y -# CONFIG_AGP_ALI is not set -# CONFIG_AGP_ATI is not set -# CONFIG_AGP_AMD is not set -CONFIG_AGP_AMD64=y -CONFIG_AGP_INTEL=y -# CONFIG_AGP_NVIDIA is not set -# CONFIG_AGP_SIS is not set -# CONFIG_AGP_SWORKS is not set -# CONFIG_AGP_VIA is not set -# CONFIG_AGP_EFFICEON is not set -# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set # CONFIG_CS5535_GPIO is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 +# CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set -CONFIG_HPET_MMAP=y +# CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set - -# -# SPI support -# +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_I801=y +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_IT8712F_WDT is not set +# CONFIG_HP_WATCHDOG is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_SBC7240_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_AGP=y +# CONFIG_AGP_ALI is not set +# CONFIG_AGP_ATI is not set +# CONFIG_AGP_AMD is not set +CONFIG_AGP_AMD64=y +CONFIG_AGP_INTEL=y +# CONFIG_AGP_NVIDIA is not set +# CONFIG_AGP_SIS is not set +# CONFIG_AGP_SWORKS is not set +# CONFIG_AGP_VIA is not set +# CONFIG_AGP_EFFICEON is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_I810 is not set +# CONFIG_DRM_I830 is not set +CONFIG_DRM_I915=y +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_VESA is not set +CONFIG_FB_EFI=y +# CONFIG_FB_IMAC is not set +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I810 is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +# CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128 +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # # Sound @@ -1047,33 +1498,167 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_SEQ_DUMMY=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y + +# +# Generic devices +# +# CONFIG_SND_PCSP is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_CS5535AUDIO is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_ANALOG=y +CONFIG_SND_HDA_CODEC_SIGMATEL=y +CONFIG_SND_HDA_CODEC_VIA=y +CONFIG_SND_HDA_CODEC_ATIHDMI=y +CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CMEDIA=y +CONFIG_SND_HDA_CODEC_SI3054=y +CONFIG_SND_HDA_GENERIC=y +# CONFIG_SND_HDA_POWER_SAVE is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SIS7019 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# # # Open Sound System # -CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_HID_DEBUG=y +CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +CONFIG_USB_HIDINPUT_POWERBOOK=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_PANTHERLORD_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_ZEROPLUS_FF=y +CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options @@ -1081,18 +1666,18 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_PERSIST is not set +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1125,8 +1710,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices @@ -1138,10 +1725,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1167,90 +1750,125 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # -# USB DSL modem support +# LED drivers # +# CONFIG_LEDS_CLEVO_MAIL is not set # -# USB Gadget Support +# LED Triggers # -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC=y # -# LED devices +# Reporting subsystems # -# CONFIG_NEW_LEDS is not set +# CONFIG_EDAC_DEBUG is not set +# CONFIG_EDAC_MM_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set # -# LED drivers +# RTC interfaces # +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# LED Triggers +# I2C RTC drivers # -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # -# Real Time Clock +# SPI RTC drivers # -# CONFIG_RTC_CLASS is not set # -# DMA Engine support +# Platform RTC drivers # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Clients +# on-CPU RTC drivers # +CONFIG_DMADEVICES=y # # DMA Devices # -CONFIG_VIRTUALIZATION=y -# CONFIG_KVM is not set +# CONFIG_INTEL_IOATDMA is not set +# CONFIG_UIO is not set # -# Userspace I/O +# Firmware Drivers # -# CONFIG_UIO is not set +# CONFIG_EDD is not set +CONFIG_EFI_VARS=y +# CONFIG_DELL_RBU is not set +# CONFIG_DCDBAS is not set +CONFIG_DMIID=y +# CONFIG_ISCSI_IBFT_FIND is not set # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -# CONFIG_REISERFS_FS_SECURITY is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1260,8 +1878,8 @@ CONFIG_GENERIC_ACL=y # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set +CONFIG_JOLIET=y +CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # @@ -1279,13 +1897,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1293,6 +1911,7 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1300,33 +1919,15 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -1336,14 +1937,26 @@ CONFIG_SUNRPC=y # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -1378,37 +1991,33 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -# CONFIG_DEBUG_FS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1423,48 +2032,174 @@ CONFIG_TIMER_STATS=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set -# CONFIG_FRAME_POINTER is not set -CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y +# CONFIG_SAMPLES is not set +# CONFIG_KGDB is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_NONPROMISC_DEVMEM is not set CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_RODATA is not set +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_X86_PTDUMP is not set +CONFIG_DEBUG_RODATA=y +# CONFIG_DEBUG_RODATA_TEST is not set +CONFIG_DEBUG_NX_TEST=m # CONFIG_4KSTACKS is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_DOUBLEFAULT=y +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +CONFIG_DEBUG_BOOT_PARAMS=y +# CONFIG_CPA_DEBUG is not set # # Security options # -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_FILE_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_586 is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SALSA20_586 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_586 is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_PADLOCK is not set +# CONFIG_CRYPTO_DEV_GEODE is not set +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set +# CONFIG_LGUEST is not set +# CONFIG_VIRTIO_PCI is not set +# CONFIG_VIRTIO_BALLOON is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_X86_SMP=y -CONFIG_X86_HT=y -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_TRAMPOLINE=y -CONFIG_KTIME_SCALAR=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 2f1b35664998..ae5124e064d4 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc1 -# Sun May 4 19:27:29 2008 +# Sun May 4 19:59:57 2008 # CONFIG_64BIT=y # CONFIG_X86_32 is not set @@ -61,27 +61,42 @@ CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set # CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set +CONFIG_CGROUP_SCHED=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +# CONFIG_CGROUP_MEM_RES_CTLR is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_PROC_PID_CPUSET=y CONFIG_RELAY=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y -# CONFIG_USER_NS is not set +CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" @@ -93,7 +108,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -108,12 +123,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set -CONFIG_OPROFILE=y +CONFIG_MARKERS=y +# CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y @@ -133,15 +149,15 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_BLK_DEV_BSG=y CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set @@ -155,7 +171,7 @@ CONFIG_CLASSIC_RCU=y # Processor type and features # CONFIG_TICK_ONESHOT=y -# CONFIG_NO_HZ is not set +CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y @@ -171,7 +187,8 @@ CONFIG_X86_PC=y # CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set # CONFIG_PARAVIRT_GUEST is not set -# CONFIG_MEMTEST_BOOTPARAM is not set +CONFIG_MEMTEST_BOOTPARAM=y +CONFIG_MEMTEST_BOOTPARAM_VALUE=0 # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set @@ -196,14 +213,17 @@ CONFIG_X86_PC=y # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set -# CONFIG_MCORE2 is not set -CONFIG_GENERIC_CPU=y +CONFIG_MCORE2=y +# CONFIG_GENERIC_CPU is not set CONFIG_X86_CPU=y -CONFIG_X86_L1_CACHE_BYTES=128 -CONFIG_X86_INTERNODE_CACHE_BYTES=128 +CONFIG_X86_L1_CACHE_BYTES=64 +CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y -CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_GOOD_APIC=y +CONFIG_X86_INTEL_USERCOPY=y +CONFIG_X86_USE_PPRO_CHECKSUM=y +CONFIG_X86_P6_NOP=y CONFIG_X86_TSC=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 @@ -212,20 +232,19 @@ CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y -# CONFIG_CALGARY_IOMMU is not set +CONFIG_CALGARY_IOMMU=y +CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y -CONFIG_NR_CPUS=32 -CONFIG_SCHED_SMT=y +CONFIG_NR_CPUS=4 +# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y +# CONFIG_X86_MCE is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y @@ -234,7 +253,7 @@ CONFIG_NUMA=y CONFIG_K8_NUMA=y CONFIG_X86_64_ACPI_NUMA=y CONFIG_NODES_SPAN_OTHER_NODES=y -CONFIG_NUMA_EMU=y +# CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=6 CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -249,7 +268,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -# CONFIG_SPARSEMEM_VMEMMAP is not set +CONFIG_SPARSEMEM_VMEMMAP=y # # Memory hotplug is currently incompatible with Software Suspend @@ -263,18 +282,18 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MTRR=y # CONFIG_X86_PAT is not set -# CONFIG_EFI is not set +CONFIG_EFI=y CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set -CONFIG_HZ_250=y +# CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 +CONFIG_HZ_1000=y +CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x200000 -# CONFIG_RELOCATABLE is not set +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set @@ -286,10 +305,15 @@ CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y -# CONFIG_PM_DEBUG is not set +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_TRACE=y +CONFIG_PM_TRACE_RTC=y CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y -# CONFIG_SUSPEND is not set +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_ACPI=y @@ -327,35 +351,34 @@ CONFIG_ACPI_CONTAINER=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_STAT is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=y -CONFIG_X86_POWERNOW_K8=y -CONFIG_X86_POWERNOW_K8_ACPI=y +# CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set -CONFIG_X86_P4_CLOCKMOD=y +# CONFIG_X86_P4_CLOCKMOD is not set # # shared options # -CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y -CONFIG_X86_SPEEDSTEP_LIB=y +# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set +# CONFIG_X86_SPEEDSTEP_LIB is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y # # Bus options (PCI etc.) @@ -364,28 +387,53 @@ CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y -# CONFIG_DMAR is not set +CONFIG_DMAR=y +CONFIG_DMAR_GFX_WA=y +CONFIG_DMAR_FLOPPY_WA=y CONFIG_PCIEPORTBUS=y +# CONFIG_HOTPLUG_PCI_PCIE is not set CONFIG_PCIEAER=y # CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set -# CONFIG_HT_IRQ is not set +CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_ACPI is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y -CONFIG_IA32_AOUT=y +# CONFIG_IA32_AOUT is not set CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y @@ -399,22 +447,31 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set +CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set @@ -423,34 +480,109 @@ CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_VENO is not set +# CONFIG_TCP_CONG_YEAH is not set +# CONFIG_TCP_CONG_ILLINOIS is not set +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set +CONFIG_TCP_MD5SIG=y +# CONFIG_IP_VS is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_LOG=y +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_FTP=y +CONFIG_NF_CONNTRACK_IRC=y +CONFIG_NF_CONNTRACK_SIP=y +CONFIG_NF_CT_NETLINK=y +CONFIG_NETFILTER_XTABLES=y +CONFIG_NETFILTER_XT_TARGET_MARK=y +CONFIG_NETFILTER_XT_TARGET_NFLOG=y +CONFIG_NETFILTER_XT_TARGET_SECMARK=y +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y +CONFIG_NETFILTER_XT_TARGET_TCPMSS=y +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +CONFIG_NETFILTER_XT_MATCH_MARK=y +CONFIG_NETFILTER_XT_MATCH_POLICY=y +CONFIG_NETFILTER_XT_MATCH_STATE=y + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=y +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=y +CONFIG_IP_NF_TARGET_ULOG=y +CONFIG_NF_NAT=y +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_NF_NAT_FTP=y +CONFIG_NF_NAT_IRC=y +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=y +CONFIG_IP_NF_MANGLE=y + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=y +CONFIG_IP6_NF_IPTABLES=y +CONFIG_IP6_NF_MATCH_IPV6HEADER=y +CONFIG_IP6_NF_FILTER=y +CONFIG_IP6_NF_TARGET_LOG=y +CONFIG_IP6_NF_TARGET_REJECT=y +CONFIG_IP6_NF_MANGLE=y # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -458,6 +590,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set +CONFIG_LLC=y # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -465,25 +598,99 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_INGRESS is not set + +# +# Classification +# +CONFIG_NET_CLS=y +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +# CONFIG_NET_EMATCH_CMP is not set +# CONFIG_NET_EMATCH_NBYTE is not set +# CONFIG_NET_EMATCH_U32 is not set +# CONFIG_NET_EMATCH_META is not set +# CONFIG_NET_EMATCH_TEXT is not set +CONFIG_NET_CLS_ACT=y +# CONFIG_NET_ACT_POLICE is not set +# CONFIG_NET_ACT_GACT is not set +# CONFIG_NET_ACT_MIRRED is not set +# CONFIG_NET_ACT_IPT is not set +# CONFIG_NET_ACT_NAT is not set +# CONFIG_NET_ACT_PEDIT is not set +# CONFIG_NET_ACT_SIMP is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set -# CONFIG_HAMRADIO is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +# CONFIG_AX25 is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y # # Wireless # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set +CONFIG_CFG80211=y +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=y + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -500,9 +707,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set +CONFIG_DEBUG_DEVRES=y # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_PNP=y @@ -513,7 +721,7 @@ CONFIG_PNP=y # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -526,7 +734,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -536,77 +744,16 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ACER_WMI is not set +# CONFIG_ASUS_LAPTOP is not set +# CONFIG_FUJITSU_LAPTOP is not set +# CONFIG_MSI_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_ENCLOSURE_SERVICES is not set CONFIG_HAVE_IDE=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -CONFIG_BLK_DEV_IDEACPI=y -# CONFIG_IDE_TASK_IOCTL is not set -CONFIG_IDE_PROC_FS=y - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_PLATFORM is not set -# CONFIG_BLK_DEV_CMD640 is not set -# CONFIG_BLK_DEV_IDEPNP is not set -CONFIG_BLK_DEV_IDEDMA_SFF=y - -# -# PCI IDE chipsets support -# -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_PCIBUS_ORDER=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_RZ1000 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_BLK_DEV_ATIIXP=y -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -CONFIG_BLK_DEV_PIIX=y -# CONFIG_BLK_DEV_IT8213 is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -CONFIG_BLK_DEV_PDC202XX_NEW=y -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SIS5513 is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_BLK_DEV_TC86C001 is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_IDE is not set # # SCSI device support @@ -615,8 +762,8 @@ CONFIG_BLK_DEV_IDEDMA=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_PROC_FS is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) @@ -625,7 +772,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set @@ -642,76 +789,110 @@ CONFIG_SCSI_WAIT_SCAN=m # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y -# CONFIG_SATA_PMP is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set -# CONFIG_ATA_SFF is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +CONFIG_ATA_PIIX=y +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ACPI is not set +# CONFIG_PATA_ALI is not set +CONFIG_PATA_AMD=y +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +CONFIG_PATA_OLDPIIX=y +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_MD=y +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set +CONFIG_DM_MIRROR=y +CONFIG_DM_ZERO=y # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set -CONFIG_FUSION=y -CONFIG_FUSION_SPI=y -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set -CONFIG_FUSION_MAX_SGE=128 -# CONFIG_FUSION_CTL is not set -# CONFIG_FUSION_LOGGING is not set +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set -CONFIG_IEEE1394=y - -# -# Subsystem Options -# -# CONFIG_IEEE1394_VERBOSEDEBUG is not set - -# -# Controllers -# - -# -# Texas Instruments PCILynx requires I2C -# -CONFIG_IEEE1394_OHCI1394=y - -# -# Protocols -# -# CONFIG_IEEE1394_VIDEO1394 is not set -# CONFIG_IEEE1394_SBP2 is not set -# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set -# CONFIG_IEEE1394_ETH1394 is not set -# CONFIG_IEEE1394_DV1394 is not set -CONFIG_IEEE1394_RAWIO=y +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y -# CONFIG_MAC_EMUMOUSEBTN is not set +CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y -CONFIG_NETDEVICES_MULTIQUEUE=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set -CONFIG_TUN=y +# CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set @@ -722,18 +903,16 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y +# CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set -CONFIG_TULIP=y -# CONFIG_TULIP_MWI is not set -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set +# CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set +# CONFIG_PCMCIA_XIRCOM is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -741,13 +920,9 @@ CONFIG_TULIP=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set -CONFIG_AMD8111_ETH=y -# CONFIG_AMD8111E_NAPI is not set +# CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -CONFIG_B44=y -CONFIG_B44_PCI_AUTOSELECT=y -CONFIG_B44_PCICORE_AUTOSELECT=y -CONFIG_B44_PCI=y +# CONFIG_B44 is not set CONFIG_FORCEDETH=y # CONFIG_FORCEDETH_NAPI is not set # CONFIG_EEPRO100 is not set @@ -755,9 +930,9 @@ CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set -CONFIG_8139CP=y +# CONFIG_8139CP is not set CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set @@ -783,10 +958,11 @@ CONFIG_E1000=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set -# CONFIG_SKY2 is not set +CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y -CONFIG_BNX2=y +# CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y @@ -794,8 +970,7 @@ CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set -CONFIG_S2IO=m -# CONFIG_S2IO_NAPI is not set +# CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -803,15 +978,44 @@ CONFIG_S2IO=m # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set # CONFIG_SFC is not set -# CONFIG_TR is not set +CONFIG_TR=y +# CONFIG_IBMOL is not set +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_AIRO is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +CONFIG_ATH5K=y +# CONFIG_ATH5K_DEBUG is not set # CONFIG_IWLWIFI is not set +# CONFIG_IWLCORE is not set # CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # # USB Network Adapters @@ -821,8 +1025,19 @@ CONFIG_S2IO=m # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set # CONFIG_WAN is not set -# CONFIG_FDDI is not set +CONFIG_FDDI=y +# CONFIG_DEFXX is not set +# CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -839,14 +1054,14 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set +CONFIG_INPUT_FF_MEMLESS=y +CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set @@ -874,17 +1089,62 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_JOYSTICK=y +# CONFIG_JOYSTICK_ANALOG is not set +# CONFIG_JOYSTICK_A3D is not set +# CONFIG_JOYSTICK_ADI is not set +# CONFIG_JOYSTICK_COBRA is not set +# CONFIG_JOYSTICK_GF2K is not set +# CONFIG_JOYSTICK_GRIP is not set +# CONFIG_JOYSTICK_GRIP_MP is not set +# CONFIG_JOYSTICK_GUILLEMOT is not set +# CONFIG_JOYSTICK_INTERACT is not set +# CONFIG_JOYSTICK_SIDEWINDER is not set +# CONFIG_JOYSTICK_TMDC is not set +# CONFIG_JOYSTICK_IFORCE is not set +# CONFIG_JOYSTICK_WARRIOR is not set +# CONFIG_JOYSTICK_MAGELLAN is not set +# CONFIG_JOYSTICK_SPACEORB is not set +# CONFIG_JOYSTICK_SPACEBALL is not set +# CONFIG_JOYSTICK_STINGER is not set +# CONFIG_JOYSTICK_TWIDJOY is not set +# CONFIG_JOYSTICK_ZHENHUA is not set +# CONFIG_JOYSTICK_JOYDUMP is not set +# CONFIG_JOYSTICK_XPAD is not set +CONFIG_INPUT_TABLET=y +# CONFIG_TABLET_USB_ACECAD is not set +# CONFIG_TABLET_USB_AIPTEK is not set +# CONFIG_TABLET_USB_GTCO is not set +# CONFIG_TABLET_USB_KBTAB is not set +# CONFIG_TABLET_USB_WACOM is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_APANEL is not set +# CONFIG_INPUT_ATLAS_BTNS is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_UINPUT is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y -# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y @@ -897,9 +1157,25 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_DEVKMEM is not set -# CONFIG_SERIAL_NONSTANDARD is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_COMPUTONE is not set +# CONFIG_ROCKETPORT is not set +# CONFIG_CYCLADES is not set +# CONFIG_DIGIEPCA is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +# CONFIG_ISI is not set +# CONFIG_SYNCLINK is not set +# CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set +# CONFIG_N_HDLC is not set +# CONFIG_RISCOM8 is not set +# CONFIG_SPECIALIX is not set +# CONFIG_SX is not set +# CONFIG_RIO is not set +# CONFIG_STALDRV is not set # CONFIG_NOZOMI is not set # @@ -910,9 +1186,14 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support @@ -921,28 +1202,78 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_INTEL=y -CONFIG_HW_RANDOM_AMD=y -# CONFIG_NVRAM is not set -CONFIG_RTC=y +# CONFIG_HW_RANDOM_INTEL is not set +# CONFIG_HW_RANDOM_AMD is not set +CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set -CONFIG_RAW_DRIVER=y -CONFIG_MAX_RAW_DEVS=256 +# CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set -CONFIG_HPET_MMAP=y +# CONFIG_HPET_MMAP is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +CONFIG_I2C_I801=y +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y @@ -951,20 +1282,55 @@ CONFIG_POWER_SUPPLY=y # CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set CONFIG_THERMAL=y -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_IT8712F_WDT is not set +# CONFIG_HP_WATCHDOG is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y -CONFIG_SSB=y -CONFIG_SSB_SPROM=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -# CONFIG_SSB_B43_PCI_BRIDGE is not set -# CONFIG_SSB_DEBUG is not set -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -996,11 +1362,81 @@ CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set -# CONFIG_DRM is not set +CONFIG_DRM=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_I810 is not set +# CONFIG_DRM_I830 is not set +CONFIG_DRM_I915=y +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +# CONFIG_FB_VESA is not set +CONFIG_FB_EFI=y +# CONFIG_FB_IMAC is not set +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_INTEL is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_GEODE is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +# CONFIG_BACKLIGHT_PROGEAR is not set # # Display device support @@ -1012,9 +1448,14 @@ CONFIG_AGP_INTEL=y # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256 +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # # Sound @@ -1024,35 +1465,165 @@ CONFIG_SOUND=y # # Advanced Linux Sound Architecture # -# CONFIG_SND is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_SEQ_DUMMY=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y + +# +# Generic devices +# +# CONFIG_SND_PCSP is not set +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_ANALOG=y +CONFIG_SND_HDA_CODEC_SIGMATEL=y +CONFIG_SND_HDA_CODEC_VIA=y +CONFIG_SND_HDA_CODEC_ATIHDMI=y +CONFIG_SND_HDA_CODEC_CONEXANT=y +CONFIG_SND_HDA_CODEC_CMEDIA=y +CONFIG_SND_HDA_CODEC_SI3054=y +CONFIG_SND_HDA_GENERIC=y +# CONFIG_SND_HDA_POWER_SAVE is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# # # Open Sound System # -CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_OSS is not set +# CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_HID_DEBUG=y CONFIG_HIDRAW=y # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set +CONFIG_USB_HIDINPUT_POWERBOOK=y +CONFIG_HID_FF=y +CONFIG_HID_PID=y +CONFIG_LOGITECH_FF=y +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_PANTHERLORD_FF=y +CONFIG_THRUSTMASTER_FF=y +CONFIG_ZEROPLUS_FF=y +CONFIG_USB_HIDDEV=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options @@ -1060,7 +1631,7 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # @@ -1073,7 +1644,6 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_HCD_SSB is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y @@ -1108,7 +1678,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices @@ -1148,11 +1718,78 @@ CONFIG_USB_MON=y # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_CLEVO_MAIL is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -# CONFIG_RTC_CLASS is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +# CONFIG_EDAC_MM_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# CONFIG_DMADEVICES=y # @@ -1165,6 +1802,7 @@ CONFIG_DMADEVICES=y # Firmware Drivers # # CONFIG_EDD is not set +CONFIG_EFI_VARS=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y @@ -1173,25 +1811,16 @@ CONFIG_DMIID=y # # File systems # -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set -# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y -# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=y -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -# CONFIG_REISERFS_FS_SECURITY is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set @@ -1200,7 +1829,12 @@ CONFIG_FS_POSIX_ACL=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1211,7 +1845,7 @@ CONFIG_GENERIC_ACL=y # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set +CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # @@ -1229,6 +1863,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y @@ -1242,6 +1877,7 @@ CONFIG_HUGETLB_PAGE=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1255,15 +1891,38 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set @@ -1298,7 +1957,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y @@ -1309,21 +1968,22 @@ CONFIG_NLS_UTF8=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_SCHEDSTATS is not set +CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1340,7 +2000,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_FRAME_POINTER is not set +CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_KPROBES_SANITY_TEST is not set @@ -1348,20 +2008,21 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y # CONFIG_SAMPLES is not set # CONFIG_KGDB is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_NONPROMISC_DEVMEM is not set CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_X86_PTDUMP is not set -# CONFIG_DEBUG_RODATA is not set +CONFIG_DEBUG_RODATA=y # CONFIG_DIRECT_GBPAGES is not set -# CONFIG_DEBUG_NX_TEST is not set +# CONFIG_DEBUG_RODATA_TEST is not set +CONFIG_DEBUG_NX_TEST=m CONFIG_X86_MPPARSE=y # CONFIG_IOMMU_DEBUG is not set CONFIG_IO_DELAY_TYPE_0X80=0 @@ -1373,18 +2034,115 @@ CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 -# CONFIG_DEBUG_BOOT_PARAMS is not set +CONFIG_DEBUG_BOOT_PARAMS=y # CONFIG_CPA_DEBUG is not set # # Security options # -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set -# CONFIG_HAVE_KVM is not set -# CONFIG_VIRTUALIZATION is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +# CONFIG_SECURITY_NETWORK_XFRM is not set +CONFIG_SECURITY_CAPABILITIES=y +CONFIG_SECURITY_FILE_CAPABILITIES=y +# CONFIG_SECURITY_ROOTPLUG is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_X86_64 is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SALSA20_X86_64 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_TWOFISH_X86_64 is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_HAVE_KVM=y +CONFIG_VIRTUALIZATION=y # CONFIG_KVM is not set # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_BALLOON is not set -- cgit v1.2.3 From 205f93288093df69f9ab5f6981aef27b91088b28 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 5 May 2008 17:52:52 -0400 Subject: x86: add new cache descriptor The latest rev of Intel doc AP-485 details a new cache descriptor that we don't yet support. A 6MB 24-way assoc L2 cache. Signed-off-by: Dave Jones Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/intel_cacheinfo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 26d615dcb149..2c8afafa18e8 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -62,6 +62,7 @@ static struct _cache_table cache_table[] __cpuinitdata = { 0x4b, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size */ { 0x4c, LVL_3, 12288 }, /* 12-way set assoc, 64 byte line size */ { 0x4d, LVL_3, 16384 }, /* 16-way set assoc, 64 byte line size */ + { 0x4e, LVL_2, 6144 }, /* 24-way set assoc, 64 byte line size */ { 0x60, LVL_1_DATA, 16 }, /* 8-way set assoc, sectored cache, 64 byte line size */ { 0x66, LVL_1_DATA, 8 }, /* 4-way set assoc, sectored cache, 64 byte line size */ { 0x67, LVL_1_DATA, 16 }, /* 4-way set assoc, sectored cache, 64 byte line size */ -- cgit v1.2.3 From 0327318445d55808991a63137cfb698a90ab6adf Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 18 Apr 2008 17:49:15 -0700 Subject: x86_64: simplify the memtest parameter setting use CONFIG_MEMTEST only. if it is set, will have memtest=0 (disabled) need to have memtest=4 in command line to test more patterns. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 30 +++++++----------------------- arch/x86/mm/init_64.c | 5 +++-- 2 files changed, 10 insertions(+), 25 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fe361ae7ef2f..a1a9021146bc 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -419,35 +419,19 @@ config PARAVIRT endif -config MEMTEST_BOOTPARAM - bool "Memtest boot parameter" +config MEMTEST + bool "Memtest" depends on X86_64 default y help This option adds a kernel parameter 'memtest', which allows memtest - to be disabled at boot. If this option is selected, memtest - functionality can be disabled with memtest=0 on the kernel - command line. The purpose of this option is to allow a single - kernel image to be distributed with memtest built in, but not - necessarily enabled. - + to be set. + memtest=0, mean disabled; -- default + memtest=1, mean do 1 test pattern; + ... + memtest=4, mean do 4 test patterns. If you are unsure how to answer this question, answer Y. -config MEMTEST_BOOTPARAM_VALUE - int "Memtest boot parameter default value (0-4)" - depends on MEMTEST_BOOTPARAM - range 0 4 - default 0 - help - This option sets the default value for the kernel parameter - 'memtest', which allows memtest to be disabled at boot. If this - option is set to 0 (zero), the memtest kernel parameter will - default to 0, disabling memtest at bootup. If this option is - set to 4, the memtest kernel parameter will default to 4, - enabling memtest at bootup, and use that as pattern number. - - If you are unsure how to answer this question, answer 0. - config ACPI_SRAT def_bool y depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH) diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 32ba13b0f818..c6d81316db65 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -431,7 +431,7 @@ static void __init init_gbpages(void) direct_gbpages = 0; } -#ifdef CONFIG_MEMTEST_BOOTPARAM +#ifdef CONFIG_MEMTEST static void __init memtest(unsigned long start_phys, unsigned long size, unsigned pattern) @@ -493,7 +493,8 @@ static void __init memtest(unsigned long start_phys, unsigned long size, } -static int memtest_pattern __initdata = CONFIG_MEMTEST_BOOTPARAM_VALUE; +/* default is disabled */ +static int memtest_pattern __initdata; static int __init parse_memtest(char *arg) { -- cgit v1.2.3 From 88f85a55c0645c2b7e03bf34d2a90eddf6de34fa Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 12 May 2008 16:42:43 -0500 Subject: JFS: 0 is not valid errno value so return NULL from jfs_lookup Signed-off-by: Marcin Slusarz Signed-off-by: Dave Kleikamp Cc: jfs-discussion@lists.sourceforge.net Cc: Alexander Viro --- fs/jfs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c index 0ba6778edaa2..2aba82386810 100644 --- a/fs/jfs/namei.c +++ b/fs/jfs/namei.c @@ -1455,7 +1455,7 @@ static struct dentry *jfs_lookup(struct inode *dip, struct dentry *dentry, struc free_UCSname(&key); if (rc == -ENOENT) { d_add(dentry, NULL); - return ERR_PTR(0); + return NULL; } else if (rc) { jfs_err("jfs_lookup: dtSearch returned %d", rc); return ERR_PTR(rc); -- cgit v1.2.3 From b2e03ca7485cac033a0667d9e45e28d32fdee9a5 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 13 May 2008 08:22:10 -0500 Subject: JFS: switch to seq_files Signed-off-by: Alexey Dobriyan Signed-off-by: Dave Kleikamp --- fs/jfs/jfs_debug.c | 62 +++++++++++++++++++++------------------------- fs/jfs/jfs_debug.h | 10 ++++---- fs/jfs/jfs_logmgr.c | 35 ++++++++++++-------------- fs/jfs/jfs_metapage.c | 36 +++++++++++++-------------- fs/jfs/jfs_txnmgr.c | 68 +++++++++++++++++++++++---------------------------- fs/jfs/jfs_xtree.c | 36 +++++++++++++-------------- 6 files changed, 114 insertions(+), 133 deletions(-) diff --git a/fs/jfs/jfs_debug.c b/fs/jfs/jfs_debug.c index bf6ab19b86ee..6a73de84bcef 100644 --- a/fs/jfs/jfs_debug.c +++ b/fs/jfs/jfs_debug.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include "jfs_incore.h" #include "jfs_filsys.h" @@ -30,29 +31,19 @@ static struct proc_dir_entry *base; #ifdef CONFIG_JFS_DEBUG -static int loglevel_read(char *page, char **start, off_t off, - int count, int *eof, void *data) +static int jfs_loglevel_proc_show(struct seq_file *m, void *v) { - int len; - - len = sprintf(page, "%d\n", jfsloglevel); - - len -= off; - *start = page + off; - - if (len > count) - len = count; - else - *eof = 1; - - if (len < 0) - len = 0; + seq_printf(m, "%d\n", jfsloglevel); + return 0; +} - return len; +static int jfs_loglevel_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, jfs_loglevel_proc_show, NULL); } -static int loglevel_write(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t jfs_loglevel_proc_write(struct file *file, + const char __user *buffer, size_t count, loff_t *ppos) { char c; @@ -65,22 +56,30 @@ static int loglevel_write(struct file *file, const char __user *buffer, jfsloglevel = c - '0'; return count; } + +static const struct file_operations jfs_loglevel_proc_fops = { + .owner = THIS_MODULE, + .open = jfs_loglevel_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = jfs_loglevel_proc_write, +}; #endif static struct { const char *name; - read_proc_t *read_fn; - write_proc_t *write_fn; + const struct file_operations *proc_fops; } Entries[] = { #ifdef CONFIG_JFS_STATISTICS - { "lmstats", jfs_lmstats_read, }, - { "txstats", jfs_txstats_read, }, - { "xtstat", jfs_xtstat_read, }, - { "mpstat", jfs_mpstat_read, }, + { "lmstats", &jfs_lmstats_proc_fops, }, + { "txstats", &jfs_txstats_proc_fops, }, + { "xtstat", &jfs_xtstat_proc_fops, }, + { "mpstat", &jfs_mpstat_proc_fops, }, #endif #ifdef CONFIG_JFS_DEBUG - { "TxAnchor", jfs_txanchor_read, }, - { "loglevel", loglevel_read, loglevel_write } + { "TxAnchor", &jfs_txanchor_proc_fops, }, + { "loglevel", &jfs_loglevel_proc_fops } #endif }; #define NPROCENT ARRAY_SIZE(Entries) @@ -93,13 +92,8 @@ void jfs_proc_init(void) return; base->owner = THIS_MODULE; - for (i = 0; i < NPROCENT; i++) { - struct proc_dir_entry *p; - if ((p = create_proc_entry(Entries[i].name, 0, base))) { - p->read_proc = Entries[i].read_fn; - p->write_proc = Entries[i].write_fn; - } - } + for (i = 0; i < NPROCENT; i++) + proc_create(Entries[i].name, 0, base, Entries[i].proc_fops); } void jfs_proc_clean(void) diff --git a/fs/jfs/jfs_debug.h b/fs/jfs/jfs_debug.h index 044c1e654cc0..eafd1300a00b 100644 --- a/fs/jfs/jfs_debug.h +++ b/fs/jfs/jfs_debug.h @@ -62,7 +62,7 @@ extern void jfs_proc_clean(void); extern int jfsloglevel; -extern int jfs_txanchor_read(char *, char **, off_t, int, int *, void *); +extern const struct file_operations jfs_txanchor_proc_fops; /* information message: e.g., configuration, major event */ #define jfs_info(fmt, arg...) do { \ @@ -105,10 +105,10 @@ extern int jfs_txanchor_read(char *, char **, off_t, int, int *, void *); * ---------- */ #ifdef CONFIG_JFS_STATISTICS -extern int jfs_lmstats_read(char *, char **, off_t, int, int *, void *); -extern int jfs_txstats_read(char *, char **, off_t, int, int *, void *); -extern int jfs_mpstat_read(char *, char **, off_t, int, int *, void *); -extern int jfs_xtstat_read(char *, char **, off_t, int, int *, void *); +extern const struct file_operations jfs_lmstats_proc_fops; +extern const struct file_operations jfs_txstats_proc_fops; +extern const struct file_operations jfs_mpstat_proc_fops; +extern const struct file_operations jfs_xtstat_proc_fops; #define INCREMENT(x) ((x)++) #define DECREMENT(x) ((x)--) diff --git a/fs/jfs/jfs_logmgr.c b/fs/jfs/jfs_logmgr.c index 325a9679b95a..cd2ec2988b59 100644 --- a/fs/jfs/jfs_logmgr.c +++ b/fs/jfs/jfs_logmgr.c @@ -69,6 +69,7 @@ #include #include #include +#include #include "jfs_incore.h" #include "jfs_filsys.h" #include "jfs_metapage.h" @@ -2503,13 +2504,9 @@ exit: } #ifdef CONFIG_JFS_STATISTICS -int jfs_lmstats_read(char *buffer, char **start, off_t offset, int length, - int *eof, void *data) +static int jfs_lmstats_proc_show(struct seq_file *m, void *v) { - int len = 0; - off_t begin; - - len += sprintf(buffer, + seq_printf(m, "JFS Logmgr stats\n" "================\n" "commits = %d\n" @@ -2522,19 +2519,19 @@ int jfs_lmstats_read(char *buffer, char **start, off_t offset, int length, lmStat.pagedone, lmStat.full_page, lmStat.partial_page); + return 0; +} - begin = offset; - *start = buffer + begin; - len -= begin; - - if (len > length) - len = length; - else - *eof = 1; - - if (len < 0) - len = 0; - - return len; +static int jfs_lmstats_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, jfs_lmstats_proc_show, NULL); } + +const struct file_operations jfs_lmstats_proc_fops = { + .owner = THIS_MODULE, + .open = jfs_lmstats_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; #endif /* CONFIG_JFS_STATISTICS */ diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c index d1e64f2f2fcd..854ff0ec574f 100644 --- a/fs/jfs/jfs_metapage.c +++ b/fs/jfs/jfs_metapage.c @@ -19,10 +19,12 @@ #include #include +#include #include #include #include #include +#include #include "jfs_incore.h" #include "jfs_superblock.h" #include "jfs_filsys.h" @@ -804,13 +806,9 @@ void __invalidate_metapages(struct inode *ip, s64 addr, int len) } #ifdef CONFIG_JFS_STATISTICS -int jfs_mpstat_read(char *buffer, char **start, off_t offset, int length, - int *eof, void *data) +static int jfs_mpstat_proc_show(struct seq_file *m, void *v) { - int len = 0; - off_t begin; - - len += sprintf(buffer, + seq_printf(m, "JFS Metapage statistics\n" "=======================\n" "page allocations = %d\n" @@ -819,19 +817,19 @@ int jfs_mpstat_read(char *buffer, char **start, off_t offset, int length, mpStat.pagealloc, mpStat.pagefree, mpStat.lockwait); + return 0; +} - begin = offset; - *start = buffer + begin; - len -= begin; - - if (len > length) - len = length; - else - *eof = 1; - - if (len < 0) - len = 0; - - return len; +static int jfs_mpstat_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, jfs_mpstat_proc_show, NULL); } + +const struct file_operations jfs_mpstat_proc_fops = { + .owner = THIS_MODULE, + .open = jfs_mpstat_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; #endif diff --git a/fs/jfs/jfs_txnmgr.c b/fs/jfs/jfs_txnmgr.c index e7c60ae6b5b2..f26e4d03ada5 100644 --- a/fs/jfs/jfs_txnmgr.c +++ b/fs/jfs/jfs_txnmgr.c @@ -49,6 +49,7 @@ #include #include #include +#include #include "jfs_incore.h" #include "jfs_inode.h" #include "jfs_filsys.h" @@ -3009,11 +3010,8 @@ int jfs_sync(void *arg) } #if defined(CONFIG_PROC_FS) && defined(CONFIG_JFS_DEBUG) -int jfs_txanchor_read(char *buffer, char **start, off_t offset, int length, - int *eof, void *data) +static int jfs_txanchor_proc_show(struct seq_file *m, void *v) { - int len = 0; - off_t begin; char *freewait; char *freelockwait; char *lowlockwait; @@ -3025,7 +3023,7 @@ int jfs_txanchor_read(char *buffer, char **start, off_t offset, int length, lowlockwait = waitqueue_active(&TxAnchor.lowlockwait) ? "active" : "empty"; - len += sprintf(buffer, + seq_printf(m, "JFS TxAnchor\n" "============\n" "freetid = %d\n" @@ -3044,31 +3042,27 @@ int jfs_txanchor_read(char *buffer, char **start, off_t offset, int length, TxAnchor.tlocksInUse, jfs_tlocks_low, list_empty(&TxAnchor.unlock_queue) ? "" : "not "); + return 0; +} - begin = offset; - *start = buffer + begin; - len -= begin; - - if (len > length) - len = length; - else - *eof = 1; - - if (len < 0) - len = 0; - - return len; +static int jfs_txanchor_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, jfs_txanchor_proc_show, NULL); } + +const struct file_operations jfs_txanchor_proc_fops = { + .owner = THIS_MODULE, + .open = jfs_txanchor_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; #endif #if defined(CONFIG_PROC_FS) && defined(CONFIG_JFS_STATISTICS) -int jfs_txstats_read(char *buffer, char **start, off_t offset, int length, - int *eof, void *data) +static int jfs_txstats_proc_show(struct seq_file *m, void *v) { - int len = 0; - off_t begin; - - len += sprintf(buffer, + seq_printf(m, "JFS TxStats\n" "===========\n" "calls to txBegin = %d\n" @@ -3089,19 +3083,19 @@ int jfs_txstats_read(char *buffer, char **start, off_t offset, int length, TxStat.txBeginAnon_lockslow, TxStat.txLockAlloc, TxStat.txLockAlloc_freelock); + return 0; +} - begin = offset; - *start = buffer + begin; - len -= begin; - - if (len > length) - len = length; - else - *eof = 1; - - if (len < 0) - len = 0; - - return len; +static int jfs_txstats_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, jfs_txstats_proc_show, NULL); } + +const struct file_operations jfs_txstats_proc_fops = { + .owner = THIS_MODULE, + .open = jfs_txstats_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; #endif diff --git a/fs/jfs/jfs_xtree.c b/fs/jfs/jfs_xtree.c index 5a61ebf2cbcc..ae3acafb447b 100644 --- a/fs/jfs/jfs_xtree.c +++ b/fs/jfs/jfs_xtree.c @@ -20,7 +20,9 @@ */ #include +#include #include +#include #include "jfs_incore.h" #include "jfs_filsys.h" #include "jfs_metapage.h" @@ -4134,13 +4136,9 @@ s64 xtTruncate_pmap(tid_t tid, struct inode *ip, s64 committed_size) } #ifdef CONFIG_JFS_STATISTICS -int jfs_xtstat_read(char *buffer, char **start, off_t offset, int length, - int *eof, void *data) +static int jfs_xtstat_proc_show(struct seq_file *m, void *v) { - int len = 0; - off_t begin; - - len += sprintf(buffer, + seq_printf(m, "JFS Xtree statistics\n" "====================\n" "searches = %d\n" @@ -4149,19 +4147,19 @@ int jfs_xtstat_read(char *buffer, char **start, off_t offset, int length, xtStat.search, xtStat.fastSearch, xtStat.split); + return 0; +} - begin = offset; - *start = buffer + begin; - len -= begin; - - if (len > length) - len = length; - else - *eof = 1; - - if (len < 0) - len = 0; - - return len; +static int jfs_xtstat_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, jfs_xtstat_proc_show, NULL); } + +const struct file_operations jfs_xtstat_proc_fops = { + .owner = THIS_MODULE, + .open = jfs_xtstat_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; #endif -- cgit v1.2.3 From 54ef0ec22a39071a4e7fbedd201cecac9ac6e8a7 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Fri, 2 May 2008 14:40:38 -0500 Subject: [POWERPC] Delete unused fec_8xx net driver This driver has been superseded by fs_enet and is no longer in use. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala --- drivers/net/Kconfig | 1 - drivers/net/Makefile | 1 - drivers/net/fec_8xx/Kconfig | 20 - drivers/net/fec_8xx/Makefile | 12 - drivers/net/fec_8xx/fec_8xx-netta.c | 151 ----- drivers/net/fec_8xx/fec_8xx.h | 220 ------ drivers/net/fec_8xx/fec_main.c | 1264 ----------------------------------- drivers/net/fec_8xx/fec_mii.c | 418 ------------ 8 files changed, 2087 deletions(-) delete mode 100644 drivers/net/fec_8xx/Kconfig delete mode 100644 drivers/net/fec_8xx/Makefile delete mode 100644 drivers/net/fec_8xx/fec_8xx-netta.c delete mode 100644 drivers/net/fec_8xx/fec_8xx.h delete mode 100644 drivers/net/fec_8xx/fec_main.c delete mode 100644 drivers/net/fec_8xx/fec_mii.c diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index d27f54a2df77..009e8fdcfe5c 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1884,7 +1884,6 @@ config NE_H8300 Say Y here if you want to use the NE2000 compatible controller on the Renesas H8/300 processor. -source "drivers/net/fec_8xx/Kconfig" source "drivers/net/fs_enet/Kconfig" endif # NET_ETHERNET diff --git a/drivers/net/Makefile b/drivers/net/Makefile index dcbfe8421154..9010e58da0f2 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -217,7 +217,6 @@ obj-$(CONFIG_SMC91X) += smc91x.o obj-$(CONFIG_SMC911X) += smc911x.o obj-$(CONFIG_BFIN_MAC) += bfin_mac.o obj-$(CONFIG_DM9000) += dm9000.o -obj-$(CONFIG_FEC_8XX) += fec_8xx/ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o obj-$(CONFIG_MLX4_CORE) += mlx4/ diff --git a/drivers/net/fec_8xx/Kconfig b/drivers/net/fec_8xx/Kconfig deleted file mode 100644 index afb34ded26ee..000000000000 --- a/drivers/net/fec_8xx/Kconfig +++ /dev/null @@ -1,20 +0,0 @@ -config FEC_8XX - tristate "Motorola 8xx FEC driver" - depends on 8XX - select MII - -config FEC_8XX_GENERIC_PHY - bool "Support any generic PHY" - depends on FEC_8XX - default y - -config FEC_8XX_DM9161_PHY - bool "Support DM9161 PHY" - depends on FEC_8XX - default n - -config FEC_8XX_LXT971_PHY - bool "Support LXT971/LXT972 PHY" - depends on FEC_8XX - default n - diff --git a/drivers/net/fec_8xx/Makefile b/drivers/net/fec_8xx/Makefile deleted file mode 100644 index 70c54f8c48e5..000000000000 --- a/drivers/net/fec_8xx/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Makefile for the Motorola 8xx FEC ethernet controller -# - -obj-$(CONFIG_FEC_8XX) += fec_8xx.o - -fec_8xx-objs := fec_main.o fec_mii.o - -# the platform instantatiation objects -ifeq ($(CONFIG_NETTA),y) -fec_8xx-objs += fec_8xx-netta.o -endif diff --git a/drivers/net/fec_8xx/fec_8xx-netta.c b/drivers/net/fec_8xx/fec_8xx-netta.c deleted file mode 100644 index 79deee222e28..000000000000 --- a/drivers/net/fec_8xx/fec_8xx-netta.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * FEC instantatiation file for NETTA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "fec_8xx.h" - -/*************************************************/ - -static struct fec_platform_info fec1_info = { - .fec_no = 0, - .use_mdio = 1, - .phy_addr = 8, - .fec_irq = SIU_LEVEL1, - .phy_irq = CPM_IRQ_OFFSET + CPMVEC_PIO_PC6, - .rx_ring = 128, - .tx_ring = 16, - .rx_copybreak = 240, - .use_napi = 1, - .napi_weight = 17, -}; - -static struct fec_platform_info fec2_info = { - .fec_no = 1, - .use_mdio = 1, - .phy_addr = 2, - .fec_irq = SIU_LEVEL3, - .phy_irq = CPM_IRQ_OFFSET + CPMVEC_PIO_PC7, - .rx_ring = 128, - .tx_ring = 16, - .rx_copybreak = 240, - .use_napi = 1, - .napi_weight = 17, -}; - -static struct net_device *fec1_dev; -static struct net_device *fec2_dev; - -/* XXX custom u-boot & Linux startup needed */ -extern const char *__fw_getenv(const char *var); - -/* access ports */ -#define setbits32(_addr, _v) __fec_out32(&(_addr), __fec_in32(&(_addr)) | (_v)) -#define clrbits32(_addr, _v) __fec_out32(&(_addr), __fec_in32(&(_addr)) & ~(_v)) - -#define setbits16(_addr, _v) __fec_out16(&(_addr), __fec_in16(&(_addr)) | (_v)) -#define clrbits16(_addr, _v) __fec_out16(&(_addr), __fec_in16(&(_addr)) & ~(_v)) - -int fec_8xx_platform_init(void) -{ - immap_t *immap = (immap_t *)IMAP_ADDR; - bd_t *bd = (bd_t *) __res; - const char *s; - char *e; - int i; - - /* use MDC for MII */ - setbits16(immap->im_ioport.iop_pdpar, 0x0080); - clrbits16(immap->im_ioport.iop_pddir, 0x0080); - - /* configure FEC1 pins */ - setbits16(immap->im_ioport.iop_papar, 0xe810); - setbits16(immap->im_ioport.iop_padir, 0x0810); - clrbits16(immap->im_ioport.iop_padir, 0xe000); - - setbits32(immap->im_cpm.cp_pbpar, 0x00000001); - clrbits32(immap->im_cpm.cp_pbdir, 0x00000001); - - setbits32(immap->im_cpm.cp_cptr, 0x00000100); - clrbits32(immap->im_cpm.cp_cptr, 0x00000050); - - clrbits16(immap->im_ioport.iop_pcpar, 0x0200); - clrbits16(immap->im_ioport.iop_pcdir, 0x0200); - clrbits16(immap->im_ioport.iop_pcso, 0x0200); - setbits16(immap->im_ioport.iop_pcint, 0x0200); - - /* configure FEC2 pins */ - setbits32(immap->im_cpm.cp_pepar, 0x00039620); - setbits32(immap->im_cpm.cp_pedir, 0x00039620); - setbits32(immap->im_cpm.cp_peso, 0x00031000); - clrbits32(immap->im_cpm.cp_peso, 0x00008620); - - setbits32(immap->im_cpm.cp_cptr, 0x00000080); - clrbits32(immap->im_cpm.cp_cptr, 0x00000028); - - clrbits16(immap->im_ioport.iop_pcpar, 0x0200); - clrbits16(immap->im_ioport.iop_pcdir, 0x0200); - clrbits16(immap->im_ioport.iop_pcso, 0x0200); - setbits16(immap->im_ioport.iop_pcint, 0x0200); - - /* fill up */ - fec1_info.sys_clk = bd->bi_intfreq; - fec2_info.sys_clk = bd->bi_intfreq; - - s = __fw_getenv("ethaddr"); - if (s != NULL) { - for (i = 0; i < 6; i++) { - fec1_info.macaddr[i] = simple_strtoul(s, &e, 16); - if (*e) - s = e + 1; - } - } - - s = __fw_getenv("eth1addr"); - if (s != NULL) { - for (i = 0; i < 6; i++) { - fec2_info.macaddr[i] = simple_strtoul(s, &e, 16); - if (*e) - s = e + 1; - } - } - - fec_8xx_init_one(&fec1_info, &fec1_dev); - fec_8xx_init_one(&fec2_info, &fec2_dev); - - return fec1_dev != NULL && fec2_dev != NULL ? 0 : -1; -} - -void fec_8xx_platform_cleanup(void) -{ - if (fec2_dev != NULL) - fec_8xx_cleanup_one(fec2_dev); - - if (fec1_dev != NULL) - fec_8xx_cleanup_one(fec1_dev); -} diff --git a/drivers/net/fec_8xx/fec_8xx.h b/drivers/net/fec_8xx/fec_8xx.h deleted file mode 100644 index f3b1c6fbba8b..000000000000 --- a/drivers/net/fec_8xx/fec_8xx.h +++ /dev/null @@ -1,220 +0,0 @@ -#ifndef FEC_8XX_H -#define FEC_8XX_H - -#include -#include - -#include - -/* HW info */ - -/* CRC polynomium used by the FEC for the multicast group filtering */ -#define FEC_CRC_POLY 0x04C11DB7 - -#define MII_ADVERTISE_HALF (ADVERTISE_100HALF | \ - ADVERTISE_10HALF | ADVERTISE_CSMA) -#define MII_ADVERTISE_ALL (ADVERTISE_100FULL | \ - ADVERTISE_10FULL | MII_ADVERTISE_HALF) - -/* Interrupt events/masks. -*/ -#define FEC_ENET_HBERR 0x80000000U /* Heartbeat error */ -#define FEC_ENET_BABR 0x40000000U /* Babbling receiver */ -#define FEC_ENET_BABT 0x20000000U /* Babbling transmitter */ -#define FEC_ENET_GRA 0x10000000U /* Graceful stop complete */ -#define FEC_ENET_TXF 0x08000000U /* Full frame transmitted */ -#define FEC_ENET_TXB 0x04000000U /* A buffer was transmitted */ -#define FEC_ENET_RXF 0x02000000U /* Full frame received */ -#define FEC_ENET_RXB 0x01000000U /* A buffer was received */ -#define FEC_ENET_MII 0x00800000U /* MII interrupt */ -#define FEC_ENET_EBERR 0x00400000U /* SDMA bus error */ - -#define FEC_ECNTRL_PINMUX 0x00000004 -#define FEC_ECNTRL_ETHER_EN 0x00000002 -#define FEC_ECNTRL_RESET 0x00000001 - -#define FEC_RCNTRL_BC_REJ 0x00000010 -#define FEC_RCNTRL_PROM 0x00000008 -#define FEC_RCNTRL_MII_MODE 0x00000004 -#define FEC_RCNTRL_DRT 0x00000002 -#define FEC_RCNTRL_LOOP 0x00000001 - -#define FEC_TCNTRL_FDEN 0x00000004 -#define FEC_TCNTRL_HBC 0x00000002 -#define FEC_TCNTRL_GTS 0x00000001 - -/* values for MII phy_status */ - -#define PHY_CONF_ANE 0x0001 /* 1 auto-negotiation enabled */ -#define PHY_CONF_LOOP 0x0002 /* 1 loopback mode enabled */ -#define PHY_CONF_SPMASK 0x00f0 /* mask for speed */ -#define PHY_CONF_10HDX 0x0010 /* 10 Mbit half duplex supported */ -#define PHY_CONF_10FDX 0x0020 /* 10 Mbit full duplex supported */ -#define PHY_CONF_100HDX 0x0040 /* 100 Mbit half duplex supported */ -#define PHY_CONF_100FDX 0x0080 /* 100 Mbit full duplex supported */ - -#define PHY_STAT_LINK 0x0100 /* 1 up - 0 down */ -#define PHY_STAT_FAULT 0x0200 /* 1 remote fault */ -#define PHY_STAT_ANC 0x0400 /* 1 auto-negotiation complete */ -#define PHY_STAT_SPMASK 0xf000 /* mask for speed */ -#define PHY_STAT_10HDX 0x1000 /* 10 Mbit half duplex selected */ -#define PHY_STAT_10FDX 0x2000 /* 10 Mbit full duplex selected */ -#define PHY_STAT_100HDX 0x4000 /* 100 Mbit half duplex selected */ -#define PHY_STAT_100FDX 0x8000 /* 100 Mbit full duplex selected */ - -typedef struct phy_info { - unsigned int id; - const char *name; - void (*startup) (struct net_device * dev); - void (*shutdown) (struct net_device * dev); - void (*ack_int) (struct net_device * dev); -} phy_info_t; - -/* The FEC stores dest/src/type, data, and checksum for receive packets. - */ -#define MAX_MTU 1508 /* Allow fullsized pppoe packets over VLAN */ -#define MIN_MTU 46 /* this is data size */ -#define CRC_LEN 4 - -#define PKT_MAXBUF_SIZE (MAX_MTU+ETH_HLEN+CRC_LEN) -#define PKT_MINBUF_SIZE (MIN_MTU+ETH_HLEN+CRC_LEN) - -/* Must be a multiple of 4 */ -#define PKT_MAXBLR_SIZE ((PKT_MAXBUF_SIZE+3) & ~3) -/* This is needed so that invalidate_xxx wont invalidate too much */ -#define ENET_RX_FRSIZE L1_CACHE_ALIGN(PKT_MAXBUF_SIZE) - -/* platform interface */ - -struct fec_platform_info { - int fec_no; /* FEC index */ - int use_mdio; /* use external MII */ - int phy_addr; /* the phy address */ - int fec_irq, phy_irq; /* the irq for the controller */ - int rx_ring, tx_ring; /* number of buffers on rx */ - int sys_clk; /* system clock */ - __u8 macaddr[6]; /* mac address */ - int rx_copybreak; /* limit we copy small frames */ - int use_napi; /* use NAPI */ - int napi_weight; /* NAPI weight */ -}; - -/* forward declaration */ -struct fec; - -struct fec_enet_private { - spinlock_t lock; /* during all ops except TX pckt processing */ - spinlock_t tx_lock; /* during fec_start_xmit and fec_tx */ - struct net_device *dev; - struct napi_struct napi; - int fecno; - struct fec *fecp; - const struct fec_platform_info *fpi; - int rx_ring, tx_ring; - dma_addr_t ring_mem_addr; - void *ring_base; - struct sk_buff **rx_skbuff; - struct sk_buff **tx_skbuff; - cbd_t *rx_bd_base; /* Address of Rx and Tx buffers. */ - cbd_t *tx_bd_base; - cbd_t *dirty_tx; /* ring entries to be free()ed. */ - cbd_t *cur_rx; - cbd_t *cur_tx; - int tx_free; - struct net_device_stats stats; - struct timer_list phy_timer_list; - const struct phy_info *phy; - unsigned int fec_phy_speed; - __u32 msg_enable; - struct mii_if_info mii_if; -}; - -/***************************************************************************/ - -void fec_restart(struct net_device *dev, int duplex, int speed); -void fec_stop(struct net_device *dev); - -/***************************************************************************/ - -int fec_mii_read(struct net_device *dev, int phy_id, int location); -void fec_mii_write(struct net_device *dev, int phy_id, int location, int value); - -int fec_mii_phy_id_detect(struct net_device *dev); -void fec_mii_startup(struct net_device *dev); -void fec_mii_shutdown(struct net_device *dev); -void fec_mii_ack_int(struct net_device *dev); - -void fec_mii_link_status_change_check(struct net_device *dev, int init_media); - -/***************************************************************************/ - -#define FEC1_NO 0x00 -#define FEC2_NO 0x01 -#define FEC3_NO 0x02 - -int fec_8xx_init_one(const struct fec_platform_info *fpi, - struct net_device **devp); -int fec_8xx_cleanup_one(struct net_device *dev); - -/***************************************************************************/ - -#define DRV_MODULE_NAME "fec_8xx" -#define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "0.1" -#define DRV_MODULE_RELDATE "May 6, 2004" - -/***************************************************************************/ - -int fec_8xx_platform_init(void); -void fec_8xx_platform_cleanup(void); - -/***************************************************************************/ - -/* FEC access macros */ -#if defined(CONFIG_8xx) -/* for a 8xx __raw_xxx's are sufficient */ -#define __fec_out32(addr, x) __raw_writel(x, addr) -#define __fec_out16(addr, x) __raw_writew(x, addr) -#define __fec_in32(addr) __raw_readl(addr) -#define __fec_in16(addr) __raw_readw(addr) -#else -/* for others play it safe */ -#define __fec_out32(addr, x) out_be32(addr, x) -#define __fec_out16(addr, x) out_be16(addr, x) -#define __fec_in32(addr) in_be32(addr) -#define __fec_in16(addr) in_be16(addr) -#endif - -/* write */ -#define FW(_fecp, _reg, _v) __fec_out32(&(_fecp)->fec_ ## _reg, (_v)) - -/* read */ -#define FR(_fecp, _reg) __fec_in32(&(_fecp)->fec_ ## _reg) - -/* set bits */ -#define FS(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) | (_v)) - -/* clear bits */ -#define FC(_fecp, _reg, _v) FW(_fecp, _reg, FR(_fecp, _reg) & ~(_v)) - -/* buffer descriptor access macros */ - -/* write */ -#define CBDW_SC(_cbd, _sc) __fec_out16(&(_cbd)->cbd_sc, (_sc)) -#define CBDW_DATLEN(_cbd, _datlen) __fec_out16(&(_cbd)->cbd_datlen, (_datlen)) -#define CBDW_BUFADDR(_cbd, _bufaddr) __fec_out32(&(_cbd)->cbd_bufaddr, (_bufaddr)) - -/* read */ -#define CBDR_SC(_cbd) __fec_in16(&(_cbd)->cbd_sc) -#define CBDR_DATLEN(_cbd) __fec_in16(&(_cbd)->cbd_datlen) -#define CBDR_BUFADDR(_cbd) __fec_in32(&(_cbd)->cbd_bufaddr) - -/* set bits */ -#define CBDS_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) | (_sc)) - -/* clear bits */ -#define CBDC_SC(_cbd, _sc) CBDW_SC(_cbd, CBDR_SC(_cbd) & ~(_sc)) - -/***************************************************************************/ - -#endif diff --git a/drivers/net/fec_8xx/fec_main.c b/drivers/net/fec_8xx/fec_main.c deleted file mode 100644 index ca8d2e83ab03..000000000000 --- a/drivers/net/fec_8xx/fec_main.c +++ /dev/null @@ -1,1264 +0,0 @@ -/* - * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx. - * - * Copyright (c) 2003 Intracom S.A. - * by Pantelis Antoniou - * - * Heavily based on original FEC driver by Dan Malek - * and modifications by Joakim Tjernlund - * - * Released under the GPL - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "fec_8xx.h" - -/*************************************************/ - -#define FEC_MAX_MULTICAST_ADDRS 64 - -/*************************************************/ - -static char version[] __devinitdata = - DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")" "\n"; - -MODULE_AUTHOR("Pantelis Antoniou "); -MODULE_DESCRIPTION("Motorola 8xx FEC ethernet driver"); -MODULE_LICENSE("GPL"); - -int fec_8xx_debug = -1; /* -1 == use FEC_8XX_DEF_MSG_ENABLE as value */ -module_param(fec_8xx_debug, int, 0); -MODULE_PARM_DESC(fec_8xx_debug, - "FEC 8xx bitmapped debugging message enable value"); - - -/*************************************************/ - -/* - * Delay to wait for FEC reset command to complete (in us) - */ -#define FEC_RESET_DELAY 50 - -/*****************************************************************************************/ - -static void fec_whack_reset(fec_t * fecp) -{ - int i; - - /* - * Whack a reset. We should wait for this. - */ - FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET); - for (i = 0; - (FR(fecp, ecntrl) & FEC_ECNTRL_RESET) != 0 && i < FEC_RESET_DELAY; - i++) - udelay(1); - - if (i == FEC_RESET_DELAY) - printk(KERN_WARNING "FEC Reset timeout!\n"); - -} - -/****************************************************************************/ - -/* - * Transmitter timeout. - */ -#define TX_TIMEOUT (2*HZ) - -/****************************************************************************/ - -/* - * Returns the CRC needed when filling in the hash table for - * multicast group filtering - * pAddr must point to a MAC address (6 bytes) - */ -static __u32 fec_mulicast_calc_crc(char *pAddr) -{ - u8 byte; - int byte_count; - int bit_count; - __u32 crc = 0xffffffff; - u8 msb; - - for (byte_count = 0; byte_count < 6; byte_count++) { - byte = pAddr[byte_count]; - for (bit_count = 0; bit_count < 8; bit_count++) { - msb = crc >> 31; - crc <<= 1; - if (msb ^ (byte & 0x1)) { - crc ^= FEC_CRC_POLY; - } - byte >>= 1; - } - } - return (crc); -} - -/* - * Set or clear the multicast filter for this adaptor. - * Skeleton taken from sunlance driver. - * The CPM Ethernet implementation allows Multicast as well as individual - * MAC address filtering. Some of the drivers check to make sure it is - * a group multicast address, and discard those that are not. I guess I - * will do the same for now, but just remove the test if you want - * individual filtering as well (do the upper net layers want or support - * this kind of feature?). - */ -static void fec_set_multicast_list(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - fec_t *fecp = fep->fecp; - struct dev_mc_list *pmc; - __u32 crc; - int temp; - __u32 csrVal; - int hash_index; - __u32 hthi, htlo; - unsigned long flags; - - - if ((dev->flags & IFF_PROMISC) != 0) { - - spin_lock_irqsave(&fep->lock, flags); - FS(fecp, r_cntrl, FEC_RCNTRL_PROM); - spin_unlock_irqrestore(&fep->lock, flags); - - /* - * Log any net taps. - */ - printk(KERN_WARNING DRV_MODULE_NAME - ": %s: Promiscuous mode enabled.\n", dev->name); - return; - - } - - if ((dev->flags & IFF_ALLMULTI) != 0 || - dev->mc_count > FEC_MAX_MULTICAST_ADDRS) { - /* - * Catch all multicast addresses, set the filter to all 1's. - */ - hthi = 0xffffffffU; - htlo = 0xffffffffU; - } else { - hthi = 0; - htlo = 0; - - /* - * Now populate the hash table - */ - for (pmc = dev->mc_list; pmc != NULL; pmc = pmc->next) { - crc = fec_mulicast_calc_crc(pmc->dmi_addr); - temp = (crc & 0x3f) >> 1; - hash_index = ((temp & 0x01) << 4) | - ((temp & 0x02) << 2) | - ((temp & 0x04)) | - ((temp & 0x08) >> 2) | - ((temp & 0x10) >> 4); - csrVal = (1 << hash_index); - if (crc & 1) - hthi |= csrVal; - else - htlo |= csrVal; - } - } - - spin_lock_irqsave(&fep->lock, flags); - FC(fecp, r_cntrl, FEC_RCNTRL_PROM); - FW(fecp, hash_table_high, hthi); - FW(fecp, hash_table_low, htlo); - spin_unlock_irqrestore(&fep->lock, flags); -} - -static int fec_set_mac_address(struct net_device *dev, void *addr) -{ - struct sockaddr *mac = addr; - struct fec_enet_private *fep = netdev_priv(dev); - struct fec *fecp = fep->fecp; - int i; - __u32 addrhi, addrlo; - unsigned long flags; - - /* Get pointer to SCC area in parameter RAM. */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = mac->sa_data[i]; - - /* - * Set station address. - */ - addrhi = ((__u32) dev->dev_addr[0] << 24) | - ((__u32) dev->dev_addr[1] << 16) | - ((__u32) dev->dev_addr[2] << 8) | - (__u32) dev->dev_addr[3]; - addrlo = ((__u32) dev->dev_addr[4] << 24) | - ((__u32) dev->dev_addr[5] << 16); - - spin_lock_irqsave(&fep->lock, flags); - FW(fecp, addr_low, addrhi); - FW(fecp, addr_high, addrlo); - spin_unlock_irqrestore(&fep->lock, flags); - - return 0; -} - -/* - * This function is called to start or restart the FEC during a link - * change. This only happens when switching between half and full - * duplex. - */ -void fec_restart(struct net_device *dev, int duplex, int speed) -{ -#ifdef CONFIG_DUET - immap_t *immap = (immap_t *) IMAP_ADDR; - __u32 cptr; -#endif - struct fec_enet_private *fep = netdev_priv(dev); - struct fec *fecp = fep->fecp; - const struct fec_platform_info *fpi = fep->fpi; - cbd_t *bdp; - struct sk_buff *skb; - int i; - __u32 addrhi, addrlo; - - fec_whack_reset(fep->fecp); - - /* - * Set station address. - */ - addrhi = ((__u32) dev->dev_addr[0] << 24) | - ((__u32) dev->dev_addr[1] << 16) | - ((__u32) dev->dev_addr[2] << 8) | - (__u32) dev->dev_addr[3]; - addrlo = ((__u32) dev->dev_addr[4] << 24) | - ((__u32) dev->dev_addr[5] << 16); - FW(fecp, addr_low, addrhi); - FW(fecp, addr_high, addrlo); - - /* - * Reset all multicast. - */ - FW(fecp, hash_table_high, 0); - FW(fecp, hash_table_low, 0); - - /* - * Set maximum receive buffer size. - */ - FW(fecp, r_buff_size, PKT_MAXBLR_SIZE); - FW(fecp, r_hash, PKT_MAXBUF_SIZE); - - /* - * Set receive and transmit descriptor base. - */ - FW(fecp, r_des_start, iopa((__u32) (fep->rx_bd_base))); - FW(fecp, x_des_start, iopa((__u32) (fep->tx_bd_base))); - - fep->dirty_tx = fep->cur_tx = fep->tx_bd_base; - fep->tx_free = fep->tx_ring; - fep->cur_rx = fep->rx_bd_base; - - /* - * Reset SKB receive buffers - */ - for (i = 0; i < fep->rx_ring; i++) { - if ((skb = fep->rx_skbuff[i]) == NULL) - continue; - fep->rx_skbuff[i] = NULL; - dev_kfree_skb(skb); - } - - /* - * Initialize the receive buffer descriptors. - */ - for (i = 0, bdp = fep->rx_bd_base; i < fep->rx_ring; i++, bdp++) { - skb = dev_alloc_skb(ENET_RX_FRSIZE); - if (skb == NULL) { - printk(KERN_WARNING DRV_MODULE_NAME - ": %s Memory squeeze, unable to allocate skb\n", - dev->name); - fep->stats.rx_dropped++; - break; - } - fep->rx_skbuff[i] = skb; - skb->dev = dev; - CBDW_BUFADDR(bdp, dma_map_single(NULL, skb->data, - L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), - DMA_FROM_DEVICE)); - CBDW_DATLEN(bdp, 0); /* zero */ - CBDW_SC(bdp, BD_ENET_RX_EMPTY | - ((i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP)); - } - /* - * if we failed, fillup remainder - */ - for (; i < fep->rx_ring; i++, bdp++) { - fep->rx_skbuff[i] = NULL; - CBDW_SC(bdp, (i < fep->rx_ring - 1) ? 0 : BD_SC_WRAP); - } - - /* - * Reset SKB transmit buffers. - */ - for (i = 0; i < fep->tx_ring; i++) { - if ((skb = fep->tx_skbuff[i]) == NULL) - continue; - fep->tx_skbuff[i] = NULL; - dev_kfree_skb(skb); - } - - /* - * ...and the same for transmit. - */ - for (i = 0, bdp = fep->tx_bd_base; i < fep->tx_ring; i++, bdp++) { - fep->tx_skbuff[i] = NULL; - CBDW_BUFADDR(bdp, virt_to_bus(NULL)); - CBDW_DATLEN(bdp, 0); - CBDW_SC(bdp, (i < fep->tx_ring - 1) ? 0 : BD_SC_WRAP); - } - - /* - * Enable big endian and don't care about SDMA FC. - */ - FW(fecp, fun_code, 0x78000000); - - /* - * Set MII speed. - */ - FW(fecp, mii_speed, fep->fec_phy_speed); - - /* - * Clear any outstanding interrupt. - */ - FW(fecp, ievent, 0xffc0); - FW(fecp, ivec, (fpi->fec_irq / 2) << 29); - - /* - * adjust to speed (only for DUET & RMII) - */ -#ifdef CONFIG_DUET - cptr = in_be32(&immap->im_cpm.cp_cptr); - switch (fpi->fec_no) { - case 0: - /* - * check if in RMII mode - */ - if ((cptr & 0x100) == 0) - break; - - if (speed == 10) - cptr |= 0x0000010; - else if (speed == 100) - cptr &= ~0x0000010; - break; - case 1: - /* - * check if in RMII mode - */ - if ((cptr & 0x80) == 0) - break; - - if (speed == 10) - cptr |= 0x0000008; - else if (speed == 100) - cptr &= ~0x0000008; - break; - default: - break; - } - out_be32(&immap->im_cpm.cp_cptr, cptr); -#endif - - FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ - /* - * adjust to duplex mode - */ - if (duplex) { - FC(fecp, r_cntrl, FEC_RCNTRL_DRT); - FS(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD enable */ - } else { - FS(fecp, r_cntrl, FEC_RCNTRL_DRT); - FC(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD disable */ - } - - /* - * Enable interrupts we wish to service. - */ - FW(fecp, imask, FEC_ENET_TXF | FEC_ENET_TXB | - FEC_ENET_RXF | FEC_ENET_RXB); - - /* - * And last, enable the transmit and receive processing. - */ - FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); - FW(fecp, r_des_active, 0x01000000); -} - -void fec_stop(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - fec_t *fecp = fep->fecp; - struct sk_buff *skb; - int i; - - if ((FR(fecp, ecntrl) & FEC_ECNTRL_ETHER_EN) == 0) - return; /* already down */ - - FW(fecp, x_cntrl, 0x01); /* Graceful transmit stop */ - for (i = 0; ((FR(fecp, ievent) & 0x10000000) == 0) && - i < FEC_RESET_DELAY; i++) - udelay(1); - - if (i == FEC_RESET_DELAY) - printk(KERN_WARNING DRV_MODULE_NAME - ": %s FEC timeout on graceful transmit stop\n", - dev->name); - /* - * Disable FEC. Let only MII interrupts. - */ - FW(fecp, imask, 0); - FW(fecp, ecntrl, ~FEC_ECNTRL_ETHER_EN); - - /* - * Reset SKB transmit buffers. - */ - for (i = 0; i < fep->tx_ring; i++) { - if ((skb = fep->tx_skbuff[i]) == NULL) - continue; - fep->tx_skbuff[i] = NULL; - dev_kfree_skb(skb); - } - - /* - * Reset SKB receive buffers - */ - for (i = 0; i < fep->rx_ring; i++) { - if ((skb = fep->rx_skbuff[i]) == NULL) - continue; - fep->rx_skbuff[i] = NULL; - dev_kfree_skb(skb); - } -} - -/* common receive function */ -static int fec_enet_rx_common(struct fec_enet_private *ep, - struct net_device *dev, int budget) -{ - fec_t *fecp = fep->fecp; - const struct fec_platform_info *fpi = fep->fpi; - cbd_t *bdp; - struct sk_buff *skb, *skbn, *skbt; - int received = 0; - __u16 pkt_len, sc; - int curidx; - - /* - * First, grab all of the stats for the incoming packet. - * These get messed up if we get called due to a busy condition. - */ - bdp = fep->cur_rx; - - /* clear RX status bits for napi*/ - if (fpi->use_napi) - FW(fecp, ievent, FEC_ENET_RXF | FEC_ENET_RXB); - - while (((sc = CBDR_SC(bdp)) & BD_ENET_RX_EMPTY) == 0) { - - curidx = bdp - fep->rx_bd_base; - - /* - * Since we have allocated space to hold a complete frame, - * the last indicator should be set. - */ - if ((sc & BD_ENET_RX_LAST) == 0) - printk(KERN_WARNING DRV_MODULE_NAME - ": %s rcv is not +last\n", - dev->name); - - /* - * Check for errors. - */ - if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_CL | - BD_ENET_RX_NO | BD_ENET_RX_CR | BD_ENET_RX_OV)) { - fep->stats.rx_errors++; - /* Frame too long or too short. */ - if (sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) - fep->stats.rx_length_errors++; - /* Frame alignment */ - if (sc & (BD_ENET_RX_NO | BD_ENET_RX_CL)) - fep->stats.rx_frame_errors++; - /* CRC Error */ - if (sc & BD_ENET_RX_CR) - fep->stats.rx_crc_errors++; - /* FIFO overrun */ - if (sc & BD_ENET_RX_OV) - fep->stats.rx_crc_errors++; - - skbn = fep->rx_skbuff[curidx]; - BUG_ON(skbn == NULL); - - } else { - skb = fep->rx_skbuff[curidx]; - BUG_ON(skb == NULL); - - /* - * Process the incoming frame. - */ - fep->stats.rx_packets++; - pkt_len = CBDR_DATLEN(bdp) - 4; /* remove CRC */ - fep->stats.rx_bytes += pkt_len + 4; - - if (pkt_len <= fpi->rx_copybreak) { - /* +2 to make IP header L1 cache aligned */ - skbn = dev_alloc_skb(pkt_len + 2); - if (skbn != NULL) { - skb_reserve(skbn, 2); /* align IP header */ - skb_copy_from_linear_data(skb, - skbn->data, - pkt_len); - /* swap */ - skbt = skb; - skb = skbn; - skbn = skbt; - } - } else - skbn = dev_alloc_skb(ENET_RX_FRSIZE); - - if (skbn != NULL) { - skb_put(skb, pkt_len); /* Make room */ - skb->protocol = eth_type_trans(skb, dev); - received++; - if (!fpi->use_napi) - netif_rx(skb); - else - netif_receive_skb(skb); - } else { - printk(KERN_WARNING DRV_MODULE_NAME - ": %s Memory squeeze, dropping packet.\n", - dev->name); - fep->stats.rx_dropped++; - skbn = skb; - } - } - - fep->rx_skbuff[curidx] = skbn; - CBDW_BUFADDR(bdp, dma_map_single(NULL, skbn->data, - L1_CACHE_ALIGN(PKT_MAXBUF_SIZE), - DMA_FROM_DEVICE)); - CBDW_DATLEN(bdp, 0); - CBDW_SC(bdp, (sc & ~BD_ENET_RX_STATS) | BD_ENET_RX_EMPTY); - - /* - * Update BD pointer to next entry. - */ - if ((sc & BD_ENET_RX_WRAP) == 0) - bdp++; - else - bdp = fep->rx_bd_base; - - /* - * Doing this here will keep the FEC running while we process - * incoming frames. On a heavily loaded network, we should be - * able to keep up at the expense of system resources. - */ - FW(fecp, r_des_active, 0x01000000); - - if (received >= budget) - break; - - } - - fep->cur_rx = bdp; - - if (fpi->use_napi) { - if (received < budget) { - netif_rx_complete(dev, &fep->napi); - - /* enable RX interrupt bits */ - FS(fecp, imask, FEC_ENET_RXF | FEC_ENET_RXB); - } - } - - return received; -} - -static void fec_enet_tx(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - cbd_t *bdp; - struct sk_buff *skb; - int dirtyidx, do_wake; - __u16 sc; - - spin_lock(&fep->lock); - bdp = fep->dirty_tx; - - do_wake = 0; - while (((sc = CBDR_SC(bdp)) & BD_ENET_TX_READY) == 0) { - - dirtyidx = bdp - fep->tx_bd_base; - - if (fep->tx_free == fep->tx_ring) - break; - - skb = fep->tx_skbuff[dirtyidx]; - - /* - * Check for errors. - */ - if (sc & (BD_ENET_TX_HB | BD_ENET_TX_LC | - BD_ENET_TX_RL | BD_ENET_TX_UN | BD_ENET_TX_CSL)) { - fep->stats.tx_errors++; - if (sc & BD_ENET_TX_HB) /* No heartbeat */ - fep->stats.tx_heartbeat_errors++; - if (sc & BD_ENET_TX_LC) /* Late collision */ - fep->stats.tx_window_errors++; - if (sc & BD_ENET_TX_RL) /* Retrans limit */ - fep->stats.tx_aborted_errors++; - if (sc & BD_ENET_TX_UN) /* Underrun */ - fep->stats.tx_fifo_errors++; - if (sc & BD_ENET_TX_CSL) /* Carrier lost */ - fep->stats.tx_carrier_errors++; - } else - fep->stats.tx_packets++; - - if (sc & BD_ENET_TX_READY) - printk(KERN_WARNING DRV_MODULE_NAME - ": %s HEY! Enet xmit interrupt and TX_READY.\n", - dev->name); - - /* - * Deferred means some collisions occurred during transmit, - * but we eventually sent the packet OK. - */ - if (sc & BD_ENET_TX_DEF) - fep->stats.collisions++; - - /* - * Free the sk buffer associated with this last transmit. - */ - dev_kfree_skb_irq(skb); - fep->tx_skbuff[dirtyidx] = NULL; - - /* - * Update pointer to next buffer descriptor to be transmitted. - */ - if ((sc & BD_ENET_TX_WRAP) == 0) - bdp++; - else - bdp = fep->tx_bd_base; - - /* - * Since we have freed up a buffer, the ring is no longer - * full. - */ - if (!fep->tx_free++) - do_wake = 1; - } - - fep->dirty_tx = bdp; - - spin_unlock(&fep->lock); - - if (do_wake && netif_queue_stopped(dev)) - netif_wake_queue(dev); -} - -/* - * The interrupt handler. - * This is called from the MPC core interrupt. - */ -static irqreturn_t -fec_enet_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct fec_enet_private *fep; - const struct fec_platform_info *fpi; - fec_t *fecp; - __u32 int_events; - __u32 int_events_napi; - - if (unlikely(dev == NULL)) - return IRQ_NONE; - - fep = netdev_priv(dev); - fecp = fep->fecp; - fpi = fep->fpi; - - /* - * Get the interrupt events that caused us to be here. - */ - while ((int_events = FR(fecp, ievent) & FR(fecp, imask)) != 0) { - - if (!fpi->use_napi) - FW(fecp, ievent, int_events); - else { - int_events_napi = int_events & ~(FEC_ENET_RXF | FEC_ENET_RXB); - FW(fecp, ievent, int_events_napi); - } - - if ((int_events & (FEC_ENET_HBERR | FEC_ENET_BABR | - FEC_ENET_BABT | FEC_ENET_EBERR)) != 0) - printk(KERN_WARNING DRV_MODULE_NAME - ": %s FEC ERROR(s) 0x%x\n", - dev->name, int_events); - - if ((int_events & FEC_ENET_RXF) != 0) { - if (!fpi->use_napi) - fec_enet_rx_common(fep, dev, ~0); - else { - if (netif_rx_schedule_prep(dev, &fep->napi)) { - /* disable rx interrupts */ - FC(fecp, imask, FEC_ENET_RXF | FEC_ENET_RXB); - __netif_rx_schedule(dev, &fep->napi); - } else { - printk(KERN_ERR DRV_MODULE_NAME - ": %s driver bug! interrupt while in poll!\n", - dev->name); - FC(fecp, imask, FEC_ENET_RXF | FEC_ENET_RXB); - } - } - } - - if ((int_events & FEC_ENET_TXF) != 0) - fec_enet_tx(dev); - } - - return IRQ_HANDLED; -} - -/* This interrupt occurs when the PHY detects a link change. */ -static irqreturn_t -fec_mii_link_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct fec_enet_private *fep; - const struct fec_platform_info *fpi; - - if (unlikely(dev == NULL)) - return IRQ_NONE; - - fep = netdev_priv(dev); - fpi = fep->fpi; - - if (!fpi->use_mdio) - return IRQ_NONE; - - /* - * Acknowledge the interrupt if possible. If we have not - * found the PHY yet we can't process or acknowledge the - * interrupt now. Instead we ignore this interrupt for now, - * which we can do since it is edge triggered. It will be - * acknowledged later by fec_enet_open(). - */ - if (!fep->phy) - return IRQ_NONE; - - fec_mii_ack_int(dev); - fec_mii_link_status_change_check(dev, 0); - - return IRQ_HANDLED; -} - - -/**********************************************************************************/ - -static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - fec_t *fecp = fep->fecp; - cbd_t *bdp; - int curidx; - unsigned long flags; - - spin_lock_irqsave(&fep->tx_lock, flags); - - /* - * Fill in a Tx ring entry - */ - bdp = fep->cur_tx; - - if (!fep->tx_free || (CBDR_SC(bdp) & BD_ENET_TX_READY)) { - netif_stop_queue(dev); - spin_unlock_irqrestore(&fep->tx_lock, flags); - - /* - * Ooops. All transmit buffers are full. Bail out. - * This should not happen, since the tx queue should be stopped. - */ - printk(KERN_WARNING DRV_MODULE_NAME - ": %s tx queue full!.\n", dev->name); - return 1; - } - - curidx = bdp - fep->tx_bd_base; - /* - * Clear all of the status flags. - */ - CBDC_SC(bdp, BD_ENET_TX_STATS); - - /* - * Save skb pointer. - */ - fep->tx_skbuff[curidx] = skb; - - fep->stats.tx_bytes += skb->len; - - /* - * Push the data cache so the CPM does not get stale memory data. - */ - CBDW_BUFADDR(bdp, dma_map_single(NULL, skb->data, - skb->len, DMA_TO_DEVICE)); - CBDW_DATLEN(bdp, skb->len); - - dev->trans_start = jiffies; - - /* - * If this was the last BD in the ring, start at the beginning again. - */ - if ((CBDR_SC(bdp) & BD_ENET_TX_WRAP) == 0) - fep->cur_tx++; - else - fep->cur_tx = fep->tx_bd_base; - - if (!--fep->tx_free) - netif_stop_queue(dev); - - /* - * Trigger transmission start - */ - CBDS_SC(bdp, BD_ENET_TX_READY | BD_ENET_TX_INTR | - BD_ENET_TX_LAST | BD_ENET_TX_TC); - FW(fecp, x_des_active, 0x01000000); - - spin_unlock_irqrestore(&fep->tx_lock, flags); - - return 0; -} - -static void fec_timeout(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - fep->stats.tx_errors++; - - if (fep->tx_free) - netif_wake_queue(dev); - - /* check link status again */ - fec_mii_link_status_change_check(dev, 0); -} - -static int fec_enet_open(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - const struct fec_platform_info *fpi = fep->fpi; - unsigned long flags; - - napi_enable(&fep->napi); - - /* Install our interrupt handler. */ - if (request_irq(fpi->fec_irq, fec_enet_interrupt, 0, "fec", dev) != 0) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s Could not allocate FEC IRQ!", dev->name); - napi_disable(&fep->napi); - return -EINVAL; - } - - /* Install our phy interrupt handler */ - if (fpi->phy_irq != -1 && - request_irq(fpi->phy_irq, fec_mii_link_interrupt, 0, "fec-phy", - dev) != 0) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s Could not allocate PHY IRQ!", dev->name); - free_irq(fpi->fec_irq, dev); - napi_disable(&fep->napi); - return -EINVAL; - } - - if (fpi->use_mdio) { - fec_mii_startup(dev); - netif_carrier_off(dev); - fec_mii_link_status_change_check(dev, 1); - } else { - spin_lock_irqsave(&fep->lock, flags); - fec_restart(dev, 1, 100); /* XXX this sucks */ - spin_unlock_irqrestore(&fep->lock, flags); - - netif_carrier_on(dev); - netif_start_queue(dev); - } - return 0; -} - -static int fec_enet_close(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - const struct fec_platform_info *fpi = fep->fpi; - unsigned long flags; - - netif_stop_queue(dev); - napi_disable(&fep->napi); - netif_carrier_off(dev); - - if (fpi->use_mdio) - fec_mii_shutdown(dev); - - spin_lock_irqsave(&fep->lock, flags); - fec_stop(dev); - spin_unlock_irqrestore(&fep->lock, flags); - - /* release any irqs */ - if (fpi->phy_irq != -1) - free_irq(fpi->phy_irq, dev); - free_irq(fpi->fec_irq, dev); - - return 0; -} - -static struct net_device_stats *fec_enet_get_stats(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - return &fep->stats; -} - -static int fec_enet_poll(struct napi_struct *napi, int budget) -{ - struct fec_enet_private *fep = container_of(napi, struct fec_enet_private, napi); - struct net_device *dev = fep->dev; - - return fec_enet_rx_common(fep, dev, budget); -} - -/*************************************************************************/ - -static void fec_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strcpy(info->driver, DRV_MODULE_NAME); - strcpy(info->version, DRV_MODULE_VERSION); -} - -static int fec_get_regs_len(struct net_device *dev) -{ - return sizeof(fec_t); -} - -static void fec_get_regs(struct net_device *dev, struct ethtool_regs *regs, - void *p) -{ - struct fec_enet_private *fep = netdev_priv(dev); - unsigned long flags; - - if (regs->len < sizeof(fec_t)) - return; - - regs->version = 0; - spin_lock_irqsave(&fep->lock, flags); - memcpy_fromio(p, fep->fecp, sizeof(fec_t)); - spin_unlock_irqrestore(&fep->lock, flags); -} - -static int fec_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct fec_enet_private *fep = netdev_priv(dev); - unsigned long flags; - int rc; - - spin_lock_irqsave(&fep->lock, flags); - rc = mii_ethtool_gset(&fep->mii_if, cmd); - spin_unlock_irqrestore(&fep->lock, flags); - - return rc; -} - -static int fec_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct fec_enet_private *fep = netdev_priv(dev); - unsigned long flags; - int rc; - - spin_lock_irqsave(&fep->lock, flags); - rc = mii_ethtool_sset(&fep->mii_if, cmd); - spin_unlock_irqrestore(&fep->lock, flags); - - return rc; -} - -static int fec_nway_reset(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - return mii_nway_restart(&fep->mii_if); -} - -static __u32 fec_get_msglevel(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - return fep->msg_enable; -} - -static void fec_set_msglevel(struct net_device *dev, __u32 value) -{ - struct fec_enet_private *fep = netdev_priv(dev); - fep->msg_enable = value; -} - -static const struct ethtool_ops fec_ethtool_ops = { - .get_drvinfo = fec_get_drvinfo, - .get_regs_len = fec_get_regs_len, - .get_settings = fec_get_settings, - .set_settings = fec_set_settings, - .nway_reset = fec_nway_reset, - .get_link = ethtool_op_get_link, - .get_msglevel = fec_get_msglevel, - .set_msglevel = fec_set_msglevel, - .set_tx_csum = ethtool_op_set_tx_csum, /* local! */ - .set_sg = ethtool_op_set_sg, - .get_regs = fec_get_regs, -}; - -static int fec_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct fec_enet_private *fep = netdev_priv(dev); - struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&rq->ifr_data; - unsigned long flags; - int rc; - - if (!netif_running(dev)) - return -EINVAL; - - spin_lock_irqsave(&fep->lock, flags); - rc = generic_mii_ioctl(&fep->mii_if, mii, cmd, NULL); - spin_unlock_irqrestore(&fep->lock, flags); - return rc; -} - -int fec_8xx_init_one(const struct fec_platform_info *fpi, - struct net_device **devp) -{ - immap_t *immap = (immap_t *) IMAP_ADDR; - static int fec_8xx_version_printed = 0; - struct net_device *dev = NULL; - struct fec_enet_private *fep = NULL; - fec_t *fecp = NULL; - int i; - int err = 0; - int registered = 0; - __u32 siel; - - *devp = NULL; - - switch (fpi->fec_no) { - case 0: - fecp = &((immap_t *) IMAP_ADDR)->im_cpm.cp_fec; - break; -#ifdef CONFIG_DUET - case 1: - fecp = &((immap_t *) IMAP_ADDR)->im_cpm.cp_fec2; - break; -#endif - default: - return -EINVAL; - } - - if (fec_8xx_version_printed++ == 0) - printk(KERN_INFO "%s", version); - - i = sizeof(*fep) + (sizeof(struct sk_buff **) * - (fpi->rx_ring + fpi->tx_ring)); - - dev = alloc_etherdev(i); - if (!dev) { - err = -ENOMEM; - goto err; - } - - fep = netdev_priv(dev); - fep->dev = dev; - - /* partial reset of FEC */ - fec_whack_reset(fecp); - - /* point rx_skbuff, tx_skbuff */ - fep->rx_skbuff = (struct sk_buff **)&fep[1]; - fep->tx_skbuff = fep->rx_skbuff + fpi->rx_ring; - - fep->fecp = fecp; - fep->fpi = fpi; - - /* init locks */ - spin_lock_init(&fep->lock); - spin_lock_init(&fep->tx_lock); - - /* - * Set the Ethernet address. - */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = fpi->macaddr[i]; - - fep->ring_base = dma_alloc_coherent(NULL, - (fpi->tx_ring + fpi->rx_ring) * - sizeof(cbd_t), &fep->ring_mem_addr, - GFP_KERNEL); - if (fep->ring_base == NULL) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s dma alloc failed.\n", dev->name); - err = -ENOMEM; - goto err; - } - - /* - * Set receive and transmit descriptor base. - */ - fep->rx_bd_base = fep->ring_base; - fep->tx_bd_base = fep->rx_bd_base + fpi->rx_ring; - - /* initialize ring size variables */ - fep->tx_ring = fpi->tx_ring; - fep->rx_ring = fpi->rx_ring; - - /* SIU interrupt */ - if (fpi->phy_irq != -1 && - (fpi->phy_irq >= SIU_IRQ0 && fpi->phy_irq < SIU_LEVEL7)) { - - siel = in_be32(&immap->im_siu_conf.sc_siel); - if ((fpi->phy_irq & 1) == 0) - siel |= (0x80000000 >> fpi->phy_irq); - else - siel &= ~(0x80000000 >> (fpi->phy_irq & ~1)); - out_be32(&immap->im_siu_conf.sc_siel, siel); - } - - /* - * The FEC Ethernet specific entries in the device structure. - */ - dev->open = fec_enet_open; - dev->hard_start_xmit = fec_enet_start_xmit; - dev->tx_timeout = fec_timeout; - dev->watchdog_timeo = TX_TIMEOUT; - dev->stop = fec_enet_close; - dev->get_stats = fec_enet_get_stats; - dev->set_multicast_list = fec_set_multicast_list; - dev->set_mac_address = fec_set_mac_address; - netif_napi_add(dev, &fec->napi, - fec_enet_poll, fpi->napi_weight); - - dev->ethtool_ops = &fec_ethtool_ops; - dev->do_ioctl = fec_ioctl; - - fep->fec_phy_speed = - ((((fpi->sys_clk + 4999999) / 2500000) / 2) & 0x3F) << 1; - - init_timer(&fep->phy_timer_list); - - /* partial reset of FEC so that only MII works */ - FW(fecp, mii_speed, fep->fec_phy_speed); - FW(fecp, ievent, 0xffc0); - FW(fecp, ivec, (fpi->fec_irq / 2) << 29); - FW(fecp, imask, 0); - FW(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ - FW(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); - - netif_carrier_off(dev); - - err = register_netdev(dev); - if (err != 0) - goto err; - registered = 1; - - if (fpi->use_mdio) { - fep->mii_if.dev = dev; - fep->mii_if.mdio_read = fec_mii_read; - fep->mii_if.mdio_write = fec_mii_write; - fep->mii_if.phy_id_mask = 0x1f; - fep->mii_if.reg_num_mask = 0x1f; - fep->mii_if.phy_id = fec_mii_phy_id_detect(dev); - } - - *devp = dev; - - return 0; - - err: - if (dev != NULL) { - if (fecp != NULL) - fec_whack_reset(fecp); - - if (registered) - unregister_netdev(dev); - - if (fep != NULL) { - if (fep->ring_base) - dma_free_coherent(NULL, - (fpi->tx_ring + - fpi->rx_ring) * - sizeof(cbd_t), fep->ring_base, - fep->ring_mem_addr); - } - free_netdev(dev); - } - return err; -} - -int fec_8xx_cleanup_one(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - fec_t *fecp = fep->fecp; - const struct fec_platform_info *fpi = fep->fpi; - - fec_whack_reset(fecp); - - unregister_netdev(dev); - - dma_free_coherent(NULL, (fpi->tx_ring + fpi->rx_ring) * sizeof(cbd_t), - fep->ring_base, fep->ring_mem_addr); - - free_netdev(dev); - - return 0; -} - -/**************************************************************************************/ -/**************************************************************************************/ -/**************************************************************************************/ - -static int __init fec_8xx_init(void) -{ - return fec_8xx_platform_init(); -} - -static void __exit fec_8xx_cleanup(void) -{ - fec_8xx_platform_cleanup(); -} - -/**************************************************************************************/ -/**************************************************************************************/ -/**************************************************************************************/ - -module_init(fec_8xx_init); -module_exit(fec_8xx_cleanup); diff --git a/drivers/net/fec_8xx/fec_mii.c b/drivers/net/fec_8xx/fec_mii.c deleted file mode 100644 index 3b6ca29d31f2..000000000000 --- a/drivers/net/fec_8xx/fec_mii.c +++ /dev/null @@ -1,418 +0,0 @@ -/* - * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx. - * - * Copyright (c) 2003 Intracom S.A. - * by Pantelis Antoniou - * - * Heavily based on original FEC driver by Dan Malek - * and modifications by Joakim Tjernlund - * - * Released under the GPL - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -/*************************************************/ - -#include "fec_8xx.h" - -/*************************************************/ - -/* Make MII read/write commands for the FEC. -*/ -#define mk_mii_read(REG) (0x60020000 | ((REG & 0x1f) << 18)) -#define mk_mii_write(REG, VAL) (0x50020000 | ((REG & 0x1f) << 18) | (VAL & 0xffff)) -#define mk_mii_end 0 - -/*************************************************/ - -/* XXX both FECs use the MII interface of FEC1 */ -static DEFINE_SPINLOCK(fec_mii_lock); - -#define FEC_MII_LOOPS 10000 - -int fec_mii_read(struct net_device *dev, int phy_id, int location) -{ - struct fec_enet_private *fep = netdev_priv(dev); - fec_t *fecp; - int i, ret = -1; - unsigned long flags; - - /* XXX MII interface is only connected to FEC1 */ - fecp = &((immap_t *) IMAP_ADDR)->im_cpm.cp_fec; - - spin_lock_irqsave(&fec_mii_lock, flags); - - if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) { - FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ - FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); - FW(fecp, ievent, FEC_ENET_MII); - } - - /* Add PHY address to register command. */ - FW(fecp, mii_speed, fep->fec_phy_speed); - FW(fecp, mii_data, (phy_id << 23) | mk_mii_read(location)); - - for (i = 0; i < FEC_MII_LOOPS; i++) - if ((FR(fecp, ievent) & FEC_ENET_MII) != 0) - break; - - if (i < FEC_MII_LOOPS) { - FW(fecp, ievent, FEC_ENET_MII); - ret = FR(fecp, mii_data) & 0xffff; - } - - spin_unlock_irqrestore(&fec_mii_lock, flags); - - return ret; -} - -void fec_mii_write(struct net_device *dev, int phy_id, int location, int value) -{ - struct fec_enet_private *fep = netdev_priv(dev); - fec_t *fecp; - unsigned long flags; - int i; - - /* XXX MII interface is only connected to FEC1 */ - fecp = &((immap_t *) IMAP_ADDR)->im_cpm.cp_fec; - - spin_lock_irqsave(&fec_mii_lock, flags); - - if ((FR(fecp, r_cntrl) & FEC_RCNTRL_MII_MODE) == 0) { - FS(fecp, r_cntrl, FEC_RCNTRL_MII_MODE); /* MII enable */ - FS(fecp, ecntrl, FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN); - FW(fecp, ievent, FEC_ENET_MII); - } - - /* Add PHY address to register command. */ - FW(fecp, mii_speed, fep->fec_phy_speed); /* always adapt mii speed */ - FW(fecp, mii_data, (phy_id << 23) | mk_mii_write(location, value)); - - for (i = 0; i < FEC_MII_LOOPS; i++) - if ((FR(fecp, ievent) & FEC_ENET_MII) != 0) - break; - - if (i < FEC_MII_LOOPS) - FW(fecp, ievent, FEC_ENET_MII); - - spin_unlock_irqrestore(&fec_mii_lock, flags); -} - -/*************************************************/ - -#ifdef CONFIG_FEC_8XX_GENERIC_PHY - -/* - * Generic PHY support. - * Should work for all PHYs, but link change is detected by polling - */ - -static void generic_timer_callback(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct fec_enet_private *fep = netdev_priv(dev); - - fep->phy_timer_list.expires = jiffies + HZ / 2; - - add_timer(&fep->phy_timer_list); - - fec_mii_link_status_change_check(dev, 0); -} - -static void generic_startup(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - fep->phy_timer_list.expires = jiffies + HZ / 2; /* every 500ms */ - fep->phy_timer_list.data = (unsigned long)dev; - fep->phy_timer_list.function = generic_timer_callback; - add_timer(&fep->phy_timer_list); -} - -static void generic_shutdown(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - del_timer_sync(&fep->phy_timer_list); -} - -#endif - -#ifdef CONFIG_FEC_8XX_DM9161_PHY - -/* ------------------------------------------------------------------------- */ -/* The Davicom DM9161 is used on the NETTA board */ - -/* register definitions */ - -#define MII_DM9161_ACR 16 /* Aux. Config Register */ -#define MII_DM9161_ACSR 17 /* Aux. Config/Status Register */ -#define MII_DM9161_10TCSR 18 /* 10BaseT Config/Status Reg. */ -#define MII_DM9161_INTR 21 /* Interrupt Register */ -#define MII_DM9161_RECR 22 /* Receive Error Counter Reg. */ -#define MII_DM9161_DISCR 23 /* Disconnect Counter Register */ - -static void dm9161_startup(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - fec_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0000); -} - -static void dm9161_ack_int(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - fec_mii_read(dev, fep->mii_if.phy_id, MII_DM9161_INTR); -} - -static void dm9161_shutdown(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - fec_mii_write(dev, fep->mii_if.phy_id, MII_DM9161_INTR, 0x0f00); -} - -#endif - -#ifdef CONFIG_FEC_8XX_LXT971_PHY - -/* Support for LXT971/972 PHY */ - -#define MII_LXT971_PCR 16 /* Port Control Register */ -#define MII_LXT971_SR2 17 /* Status Register 2 */ -#define MII_LXT971_IER 18 /* Interrupt Enable Register */ -#define MII_LXT971_ISR 19 /* Interrupt Status Register */ -#define MII_LXT971_LCR 20 /* LED Control Register */ -#define MII_LXT971_TCR 30 /* Transmit Control Register */ - -static void lxt971_startup(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - fec_mii_write(dev, fep->mii_if.phy_id, MII_LXT971_IER, 0x00F2); -} - -static void lxt971_ack_int(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - fec_mii_read(dev, fep->mii_if.phy_id, MII_LXT971_ISR); -} - -static void lxt971_shutdown(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - - fec_mii_write(dev, fep->mii_if.phy_id, MII_LXT971_IER, 0x0000); -} -#endif - -/**********************************************************************************/ - -static const struct phy_info phy_info[] = { -#ifdef CONFIG_FEC_8XX_DM9161_PHY - { - .id = 0x00181b88, - .name = "DM9161", - .startup = dm9161_startup, - .ack_int = dm9161_ack_int, - .shutdown = dm9161_shutdown, - }, -#endif -#ifdef CONFIG_FEC_8XX_LXT971_PHY - { - .id = 0x0001378e, - .name = "LXT971/972", - .startup = lxt971_startup, - .ack_int = lxt971_ack_int, - .shutdown = lxt971_shutdown, - }, -#endif -#ifdef CONFIG_FEC_8XX_GENERIC_PHY - { - .id = 0, - .name = "GENERIC", - .startup = generic_startup, - .shutdown = generic_shutdown, - }, -#endif -}; - -/**********************************************************************************/ - -int fec_mii_phy_id_detect(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - const struct fec_platform_info *fpi = fep->fpi; - int i, r, start, end, phytype, physubtype; - const struct phy_info *phy; - int phy_hwid, phy_id; - - /* if no MDIO */ - if (fpi->use_mdio == 0) - return -1; - - phy_hwid = -1; - fep->phy = NULL; - - /* auto-detect? */ - if (fpi->phy_addr == -1) { - start = 0; - end = 32; - } else { /* direct */ - start = fpi->phy_addr; - end = start + 1; - } - - for (phy_id = start; phy_id < end; phy_id++) { - r = fec_mii_read(dev, phy_id, MII_PHYSID1); - if (r == -1 || (phytype = (r & 0xffff)) == 0xffff) - continue; - r = fec_mii_read(dev, phy_id, MII_PHYSID2); - if (r == -1 || (physubtype = (r & 0xffff)) == 0xffff) - continue; - phy_hwid = (phytype << 16) | physubtype; - if (phy_hwid != -1) - break; - } - - if (phy_hwid == -1) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s No PHY detected!\n", dev->name); - return -1; - } - - for (i = 0, phy = phy_info; i < ARRAY_SIZE(phy_info); i++, phy++) - if (phy->id == (phy_hwid >> 4) || phy->id == 0) - break; - - if (i >= ARRAY_SIZE(phy_info)) { - printk(KERN_ERR DRV_MODULE_NAME - ": %s PHY id 0x%08x is not supported!\n", - dev->name, phy_hwid); - return -1; - } - - fep->phy = phy; - - printk(KERN_INFO DRV_MODULE_NAME - ": %s Phy @ 0x%x, type %s (0x%08x)\n", - dev->name, phy_id, fep->phy->name, phy_hwid); - - return phy_id; -} - -void fec_mii_startup(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - const struct fec_platform_info *fpi = fep->fpi; - - if (!fpi->use_mdio || fep->phy == NULL) - return; - - if (fep->phy->startup == NULL) - return; - - (*fep->phy->startup) (dev); -} - -void fec_mii_shutdown(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - const struct fec_platform_info *fpi = fep->fpi; - - if (!fpi->use_mdio || fep->phy == NULL) - return; - - if (fep->phy->shutdown == NULL) - return; - - (*fep->phy->shutdown) (dev); -} - -void fec_mii_ack_int(struct net_device *dev) -{ - struct fec_enet_private *fep = netdev_priv(dev); - const struct fec_platform_info *fpi = fep->fpi; - - if (!fpi->use_mdio || fep->phy == NULL) - return; - - if (fep->phy->ack_int == NULL) - return; - - (*fep->phy->ack_int) (dev); -} - -/* helper function */ -static int mii_negotiated(struct mii_if_info *mii) -{ - int advert, lpa, val; - - if (!mii_link_ok(mii)) - return 0; - - val = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_BMSR); - if ((val & BMSR_ANEGCOMPLETE) == 0) - return 0; - - advert = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_ADVERTISE); - lpa = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_LPA); - - return mii_nway_result(advert & lpa); -} - -void fec_mii_link_status_change_check(struct net_device *dev, int init_media) -{ - struct fec_enet_private *fep = netdev_priv(dev); - unsigned int media; - unsigned long flags; - - if (mii_check_media(&fep->mii_if, netif_msg_link(fep), init_media) == 0) - return; - - media = mii_negotiated(&fep->mii_if); - - if (netif_carrier_ok(dev)) { - spin_lock_irqsave(&fep->lock, flags); - fec_restart(dev, !!(media & ADVERTISE_FULL), - (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)) ? - 100 : 10); - spin_unlock_irqrestore(&fep->lock, flags); - - netif_start_queue(dev); - } else { - netif_stop_queue(dev); - - spin_lock_irqsave(&fep->lock, flags); - fec_stop(dev); - spin_unlock_irqrestore(&fep->lock, flags); - - } -} -- cgit v1.2.3 From ee1a08f963c5abb5ec2d8c5defffecee7c3f84c8 Mon Sep 17 00:00:00 2001 From: Roel Kluin <12o3l@tiscali.nl> Date: Thu, 24 Apr 2008 08:32:26 +1000 Subject: [POWERPC] mpic_pasemi_msi: Failed allocation unnoticed bitmap_find_free_region(), called by mpic_msi_alloc_hwirqs() may return signed, but hwirq is unsigned. A failed allocation remains unnoticed. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/mpic_pasemi_msi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/sysdev/mpic_pasemi_msi.c b/arch/powerpc/sysdev/mpic_pasemi_msi.c index 33cbfb22ce3e..68aff6076675 100644 --- a/arch/powerpc/sysdev/mpic_pasemi_msi.c +++ b/arch/powerpc/sysdev/mpic_pasemi_msi.c @@ -95,6 +95,7 @@ static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) unsigned int virq; struct msi_desc *entry; struct msi_msg msg; + int ret; pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n", pdev, nvec, type); @@ -108,8 +109,9 @@ static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) * few MSIs for someone, but restrictions will apply to how the * sources can be changed independently. */ - hwirq = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK); - if (hwirq < 0) { + ret = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK); + hwirq = ret; + if (ret < 0) { pr_debug("pasemi_msi: failed allocating hwirq\n"); return hwirq; } -- cgit v1.2.3 From 9d5f525b86453da921360727112161254accc8c1 Mon Sep 17 00:00:00 2001 From: Roel Kluin <12o3l@tiscali.nl> Date: Thu, 24 Apr 2008 09:03:02 +1000 Subject: [POWERPC] mpic_u3msi: Failed allocation unnoticed bitmap_find_free_region(), called by mpic_msi_alloc_hwirqs() may return signed, but hwirq is unsigned. A failed allocation remains unnoticed. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/mpic_u3msi.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c index 1d5a40899b74..6e2f8686fdfc 100644 --- a/arch/powerpc/sysdev/mpic_u3msi.c +++ b/arch/powerpc/sysdev/mpic_u3msi.c @@ -115,17 +115,19 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) struct msi_desc *entry; struct msi_msg msg; u64 addr; + int ret; addr = find_ht_magic_addr(pdev); msg.address_lo = addr & 0xFFFFFFFF; msg.address_hi = addr >> 32; list_for_each_entry(entry, &pdev->msi_list, list) { - hwirq = mpic_msi_alloc_hwirqs(msi_mpic, 1); - if (hwirq < 0) { + ret = mpic_msi_alloc_hwirqs(msi_mpic, 1); + if (ret < 0) { pr_debug("u3msi: failed allocating hwirq\n"); - return hwirq; + return ret; } + hwirq = ret; virq = irq_create_mapping(msi_mpic->irqhost, hwirq); if (virq == NO_IRQ) { -- cgit v1.2.3 From 140b932f8cb6cced10b96860651a198b1b89cbb9 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Thu, 24 Apr 2008 23:16:00 +1000 Subject: [POWERPC] Create modalias file in sysfs for of_platform bus Create /sys/bus/of_platform/devices/*/modalias file to allow autoloading of modules. Modalias files are already present for many other bus types. This adds also a newline to the devspec files. Also create a devspec file for mac-io devices. They were created as a side effect. Use correct buffer size for mac-io modalias buffer. Tested on iBook1 and Efika. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- drivers/macintosh/macio_sysfs.c | 12 +++++++++++- drivers/of/device.c | 36 ++++++++++++++++++++---------------- drivers/of/platform.c | 3 +++ 3 files changed, 34 insertions(+), 17 deletions(-) diff --git a/drivers/macintosh/macio_sysfs.c b/drivers/macintosh/macio_sysfs.c index 112e5ef728f1..9e9453b58425 100644 --- a/drivers/macintosh/macio_sysfs.c +++ b/drivers/macintosh/macio_sysfs.c @@ -44,7 +44,7 @@ static ssize_t modalias_show (struct device *dev, struct device_attribute *attr, struct of_device *ofdev = to_of_device(dev); int len; - len = of_device_get_modalias(ofdev, buf, PAGE_SIZE); + len = of_device_get_modalias(ofdev, buf, PAGE_SIZE - 2); buf[len] = '\n'; buf[len+1] = 0; @@ -52,6 +52,15 @@ static ssize_t modalias_show (struct device *dev, struct device_attribute *attr, return len+1; } +static ssize_t devspec_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct of_device *ofdev; + + ofdev = to_of_device(dev); + return sprintf(buf, "%s\n", ofdev->node->full_name); +} + macio_config_of_attr (name, "%s\n"); macio_config_of_attr (type, "%s\n"); @@ -60,5 +69,6 @@ struct device_attribute macio_dev_attrs[] = { __ATTR_RO(type), __ATTR_RO(compatible), __ATTR_RO(modalias), + __ATTR_RO(devspec), __ATTR_NULL }; diff --git a/drivers/of/device.c b/drivers/of/device.c index 29681c4b700b..8fbfeee53c1e 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -48,16 +48,32 @@ void of_dev_put(struct of_device *dev) } EXPORT_SYMBOL(of_dev_put); -static ssize_t dev_show_devspec(struct device *dev, +static ssize_t devspec_show(struct device *dev, struct device_attribute *attr, char *buf) { struct of_device *ofdev; ofdev = to_of_device(dev); - return sprintf(buf, "%s", ofdev->node->full_name); + return sprintf(buf, "%s\n", ofdev->node->full_name); } -static DEVICE_ATTR(devspec, S_IRUGO, dev_show_devspec, NULL); +static ssize_t modalias_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct of_device *ofdev = to_of_device(dev); + ssize_t len = 0; + + len = of_device_get_modalias(ofdev, buf, PAGE_SIZE - 2); + buf[len] = '\n'; + buf[len+1] = 0; + return len+1; +} + +struct device_attribute of_platform_device_attrs[] = { + __ATTR_RO(devspec), + __ATTR_RO(modalias), + __ATTR_NULL +}; /** * of_release_dev - free an of device structure when all users of it are finished. @@ -78,25 +94,13 @@ EXPORT_SYMBOL(of_release_dev); int of_device_register(struct of_device *ofdev) { - int rc; - BUG_ON(ofdev->node == NULL); - - rc = device_register(&ofdev->dev); - if (rc) - return rc; - - rc = device_create_file(&ofdev->dev, &dev_attr_devspec); - if (rc) - device_unregister(&ofdev->dev); - - return rc; + return device_register(&ofdev->dev); } EXPORT_SYMBOL(of_device_register); void of_device_unregister(struct of_device *ofdev) { - device_remove_file(&ofdev->dev, &dev_attr_devspec); device_unregister(&ofdev->dev); } EXPORT_SYMBOL(of_device_unregister); diff --git a/drivers/of/platform.c b/drivers/of/platform.c index ca09a63a64db..298de0f95d70 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -17,6 +17,8 @@ #include #include +extern struct device_attribute of_platform_device_attrs[]; + static int of_platform_bus_match(struct device *dev, struct device_driver *drv) { struct of_device *of_dev = to_of_device(dev); @@ -103,6 +105,7 @@ int of_bus_type_init(struct bus_type *bus, const char *name) bus->suspend = of_platform_device_suspend; bus->resume = of_platform_device_resume; bus->shutdown = of_platform_device_shutdown; + bus->dev_attrs = of_platform_device_attrs; return bus_register(bus); } -- cgit v1.2.3 From 7a10174eeafe737f3ccfcece5bdff749c3b044e0 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Mon, 28 Apr 2008 17:30:37 +1000 Subject: [POWERPC] Define and use TLF_RESTORE_SIGMASK Replace TIF_RESTORE_SIGMASK with TLF_RESTORE_SIGMASK and define our own set_restore_sigmask() function. This saves the costly SMP-safe set_bit operation, which we do not need for the sigmask flag since TIF_SIGPENDING always has to be set too. Signed-off-by: Roland McGrath Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/entry_32.S | 4 ++-- arch/powerpc/kernel/signal.c | 12 ++++++------ arch/powerpc/kernel/signal_32.c | 2 +- arch/ppc/kernel/entry.S | 4 ++-- include/asm-powerpc/thread_info.h | 17 +++++++++++++---- 5 files changed, 24 insertions(+), 15 deletions(-) diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 0c8614d9875c..3a05e9f93d42 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -668,7 +668,7 @@ user_exc_return: /* r10 contains MSR_KERNEL here */ /* Check current_thread_info()->flags */ rlwinm r9,r1,0,0,(31-THREAD_SHIFT) lwz r9,TI_FLAGS(r9) - andi. r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED) + andi. r0,r9,_TIF_USER_WORK_MASK bne do_work restore_user: @@ -925,7 +925,7 @@ recheck: lwz r9,TI_FLAGS(r9) andi. r0,r9,_TIF_NEED_RESCHED bne- do_resched - andi. r0,r9,_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK + andi. r0,r9,_TIF_USER_WORK_MASK beq restore_user do_user_signal: /* r10 contains MSR_KERNEL here */ ori r10,r10,MSR_EE diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index a65a44fbe523..ad55488939c3 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -120,7 +120,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) int ret; int is32 = is_32bit_task(); - if (test_thread_flag(TIF_RESTORE_SIGMASK)) + if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK) oldset = ¤t->saved_sigmask; else if (!oldset) oldset = ¤t->blocked; @@ -131,9 +131,10 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) check_syscall_restart(regs, &ka, signr > 0); if (signr <= 0) { + struct thread_info *ti = current_thread_info(); /* No signal to deliver -- put the saved sigmask back */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) { - clear_thread_flag(TIF_RESTORE_SIGMASK); + if (ti->local_flags & _TLF_RESTORE_SIGMASK) { + ti->local_flags &= ~_TLF_RESTORE_SIGMASK; sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); } return 0; /* no signals delivered */ @@ -169,10 +170,9 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs) /* * A signal was successfully delivered; the saved sigmask is in - * its frame, and we can clear the TIF_RESTORE_SIGMASK flag. + * its frame, and we can clear the TLF_RESTORE_SIGMASK flag. */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); + current_thread_info()->local_flags &= ~_TLF_RESTORE_SIGMASK; } return ret; diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index ad6943468ee9..4ae16d179803 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -243,7 +243,7 @@ long sys_sigsuspend(old_sigset_t mask) current->state = TASK_INTERRUPTIBLE; schedule(); - set_thread_flag(TIF_RESTORE_SIGMASK); + set_restore_sigmask(); return -ERESTARTNOHAND; } diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index 5f3a5d068a5c..fcd830a292e2 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -647,7 +647,7 @@ user_exc_return: /* r10 contains MSR_KERNEL here */ /* Check current_thread_info()->flags */ rlwinm r9,r1,0,0,18 lwz r9,TI_FLAGS(r9) - andi. r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED) + andi. r0,r9,_TIF_USER_WORK_MASK bne do_work restore_user: @@ -898,7 +898,7 @@ recheck: lwz r9,TI_FLAGS(r9) andi. r0,r9,_TIF_NEED_RESCHED bne- do_resched - andi. r0,r9,_TIF_SIGPENDING + andi. r0,r9,_TIF_USER_WORK_MASK beq restore_user do_user_signal: /* r10 contains MSR_KERNEL here */ ori r10,r10,MSR_EE diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h index d030f5ce39ad..e079e81051fd 100644 --- a/include/asm-powerpc/thread_info.h +++ b/include/asm-powerpc/thread_info.h @@ -116,7 +116,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_SECCOMP 10 /* secure computing */ #define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */ #define TIF_NOERROR 12 /* Force successful syscall return */ -#define TIF_RESTORE_SIGMASK 13 /* Restore signal mask in do_signal */ #define TIF_FREEZE 14 /* Freezing for suspend */ #define TIF_RUNLATCH 15 /* Is the runlatch enabled? */ #define TIF_ABI_PENDING 16 /* 32/64 bit switch needed */ @@ -134,21 +133,31 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_SECCOMP (1<local_flags |= _TLF_RESTORE_SIGMASK; + set_bit(TIF_SIGPENDING, &ti->flags); +} +#endif /* !__ASSEMBLY__ */ #endif /* __KERNEL__ */ -- cgit v1.2.3 From 663276b7c6340e755ed62bed67a2b96f4fc3d513 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 30 Apr 2008 20:44:53 +1000 Subject: [POWERPC] Set lower flag bits in regs->trap to indicate debug level exception We use the low bits of regs->trap as flag bits. We already indicate critical and machine check level exceptions via this mechanism. Extend it to indicate debug level exceptions. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_booke.h | 2 +- include/asm-powerpc/ptrace.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index aefafc6330c9..721faef87095 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -272,7 +272,7 @@ label: /* continue normal handling for a critical exception... */ \ 2: mfspr r4,SPRN_DBSR; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc) + EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc) #define DEBUG_CRIT_EXCEPTION \ START_EXCEPTION(DebugCrit); \ diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h index 39023dde1cc4..38d87e5e569d 100644 --- a/include/asm-powerpc/ptrace.h +++ b/include/asm-powerpc/ptrace.h @@ -119,6 +119,7 @@ extern int ptrace_put_reg(struct task_struct *task, int regno, #ifndef __powerpc64__ #define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) != 0) #define IS_MCHECK_EXC(regs) (((regs)->trap & 4) != 0) +#define IS_DEBUG_EXC(regs) (((regs)->trap & 8) != 0) #endif /* ! __powerpc64__ */ #define TRAP(regs) ((regs)->trap & ~0xF) #ifdef __powerpc64__ -- cgit v1.2.3 From 683307da07afd3a7ee55269ee8cb70c8053b0923 Mon Sep 17 00:00:00 2001 From: Remi Machet Date: Thu, 1 May 2008 10:40:44 +1000 Subject: [POWERPC] Create of_buses for MV64x60 devices For each mv64360 entry in the OpenFirmware database, add the registration of an of_bus to take care of devices connected to the MV64x60 asynchronous devices controller. This change makes it possible for those devices to be detected by drivers that support the of_platform without having a custom call for each of them in the board file. Signed-off-by: Remi Machet Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/mv64x60_dev.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c index a132e0de8ca5..32e0ad0ebea8 100644 --- a/arch/powerpc/sysdev/mv64x60_dev.c +++ b/arch/powerpc/sysdev/mv64x60_dev.c @@ -15,6 +15,7 @@ #include #include #include +#include #include @@ -25,6 +26,11 @@ * PowerPC of_platform_bus_type. They support platform_bus_type instead. */ +static struct of_device_id __initdata of_mv64x60_devices[] = { + { .compatible = "marvell,mv64306-devctrl", }, + {} +}; + /* * Create MPSC platform devices */ @@ -484,6 +490,10 @@ static int __init mv64x60_device_setup(void) of_node_put(np); } + /* Now add every node that is on the device bus */ + for_each_compatible_node(np, NULL, "marvell,mv64360") + of_platform_bus_probe(np, of_mv64x60_devices, NULL); + return 0; } arch_initcall(mv64x60_device_setup); -- cgit v1.2.3 From 5f25f06529ecb4b20efc7ba00de599f5b9f4b63c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 May 2008 14:27:07 +1000 Subject: [POWERPC] Move declaration of init_bootmem_done into system.h ... instead of having an extern declaration in a .c file. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/init_32.c | 3 +-- include/asm-powerpc/system.h | 1 + 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 1952b4d3fa7f..45418590b6a9 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -43,6 +43,7 @@ #include #include #include +#include #include "mmu_decl.h" @@ -76,8 +77,6 @@ void MMU_init(void); /* XXX should be in current.h -- paulus */ extern struct task_struct *current_set[NR_CPUS]; -extern int init_bootmem_done; - /* * this tells the system to map all of ram with the segregs * (i.e. page tables) instead of the bats. diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 2b6559a6d113..df781adac6dd 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -190,6 +190,7 @@ extern struct task_struct *_switch(struct thread_struct *prev, extern unsigned int rtas_data; extern int mem_init_done; /* set on boot once kmalloc can be called */ +extern int init_bootmem_done; /* set on !NUMA once bootmem is available */ extern unsigned long memory_limit; extern unsigned long klimit; -- cgit v1.2.3 From 09de9ff872bca25ba717a7075c9ee49b1bdb56d2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 May 2008 14:27:07 +1000 Subject: [POWERPC] Fix sparse warnings in arch/powerpc/mm Make two vmemmap helpers static in init_64.c Make stab variables static in stab.c Make psize defs static in hash_utils_64.c Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_utils_64.c | 4 ++-- arch/powerpc/mm/init_64.c | 4 ++-- arch/powerpc/mm/stab.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 2b5a399f6fa6..1a4b4b36b0c6 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -117,7 +117,7 @@ static DEFINE_SPINLOCK(linear_map_hash_lock); /* Pre-POWER4 CPUs (4k pages only) */ -struct mmu_psize_def mmu_psize_defaults_old[] = { +static struct mmu_psize_def mmu_psize_defaults_old[] = { [MMU_PAGE_4K] = { .shift = 12, .sllp = 0, @@ -131,7 +131,7 @@ struct mmu_psize_def mmu_psize_defaults_old[] = { * * Support for 16Mb large pages */ -struct mmu_psize_def mmu_psize_defaults_gp[] = { +static struct mmu_psize_def mmu_psize_defaults_gp[] = { [MMU_PAGE_4K] = { .shift = 12, .sllp = 0, diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index c5ac532a0161..1e52e97d7409 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -183,7 +183,7 @@ void pgtable_cache_init(void) * do this by hand as the proffered address may not be correctly aligned. * Subtraction of non-aligned pointers produces undefined results. */ -unsigned long __meminit vmemmap_section_start(unsigned long page) +static unsigned long __meminit vmemmap_section_start(unsigned long page) { unsigned long offset = page - ((unsigned long)(vmemmap)); @@ -196,7 +196,7 @@ unsigned long __meminit vmemmap_section_start(unsigned long page) * which overlaps this vmemmap page is initialised then this page is * initialised already. */ -int __meminit vmemmap_populated(unsigned long start, int page_size) +static int __meminit vmemmap_populated(unsigned long start, int page_size) { unsigned long end = start + page_size; diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index efbbd13d93e5..60e6032a8088 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -30,8 +30,8 @@ struct stab_entry { }; #define NR_STAB_CACHE_ENTRIES 8 -DEFINE_PER_CPU(long, stab_cache_ptr); -DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]); +static DEFINE_PER_CPU(long, stab_cache_ptr); +static DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]); /* * Create a segment table entry for the given esid/vsid pair. -- cgit v1.2.3 From 572fb578de59efaaa8d197b0183db43b1128a06e Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 May 2008 14:27:08 +1000 Subject: [POWERPC] Move declaration of tce variables into mmu-hash64.h ... instead of having extern declarations in a .c file. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_utils_64.c | 2 -- include/asm-powerpc/mmu-hash64.h | 1 + 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 1a4b4b36b0c6..05f955f8df35 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -509,8 +509,6 @@ void __init htab_initialize(void) unsigned long base = 0, size = 0, limit; int i; - extern unsigned long tce_alloc_start, tce_alloc_end; - DBG(" -> htab_initialize()\n"); /* Initialize segment sizes */ diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h index 0dff76776044..f35d1e164da8 100644 --- a/include/asm-powerpc/mmu-hash64.h +++ b/include/asm-powerpc/mmu-hash64.h @@ -181,6 +181,7 @@ extern int mmu_io_psize; extern int mmu_kernel_ssize; extern int mmu_highuser_ssize; extern u16 mmu_slb_size; +extern unsigned long tce_alloc_start, tce_alloc_end; /* * If the processor supports 64k normal pages but not 64k cache -- cgit v1.2.3 From c884116ac375c5dd137109b58acaa9cf50164796 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 May 2008 14:27:09 +1000 Subject: [POWERPC] Remove duplicate variable definitions in mm/tlb_64.c Somewhere along the way (e28f7faf05159f1cfd564596f5e6178edba6bd49, "Four level pagetables for ppc64") we ended up with duplicate definitions for pte_freelist_cur and pte_freelist_force_free. Somehow this compiles, but it would be better to just have one definition for each. The two definitions we end up with can be static too! Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/tlb_64.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c index e2d867ce1c7e..509bc560159b 100644 --- a/arch/powerpc/mm/tlb_64.c +++ b/arch/powerpc/mm/tlb_64.c @@ -37,8 +37,8 @@ DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch); * include/asm-powerpc/tlb.h file -- tgall */ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); -DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur); -unsigned long pte_freelist_forced_free; +static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur); +static unsigned long pte_freelist_forced_free; struct pte_freelist_batch { @@ -47,9 +47,6 @@ struct pte_freelist_batch pgtable_free_t tables[0]; }; -DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur); -unsigned long pte_freelist_forced_free; - #define PTE_FREELIST_SIZE \ ((PAGE_SIZE - sizeof(struct pte_freelist_batch)) \ / sizeof(pgtable_free_t)) -- cgit v1.2.3 From 8fa29d22dcb2aec97f1a508cd3741c6e0b4a9434 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 May 2008 14:27:11 +1000 Subject: [POWERPC] sysdev/mpic_msi.c should include sysdev/mpic.h Some of the routines defined in mpic_msi.c are declared mpic.h, so the former should include the latter. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/mpic_msi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c index d272a52ecd24..de3e5e8bc324 100644 --- a/arch/powerpc/sysdev/mpic_msi.c +++ b/arch/powerpc/sysdev/mpic_msi.c @@ -16,6 +16,7 @@ #include #include +#include static void __mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq) { -- cgit v1.2.3 From 7d9e793463d854073f5c0dedea991a5b63336d6a Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 May 2008 14:27:13 +1000 Subject: [POWERPC] Add a declaration for xmon() Usually we call xmon() via debugger(), so this could be static. Sometimes when debugging it's nice to be able to call xmon() directly though, so add a declaration. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- include/asm-powerpc/xmon.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h index 88320a05f0a8..81477f24a188 100644 --- a/include/asm-powerpc/xmon.h +++ b/include/asm-powerpc/xmon.h @@ -15,6 +15,8 @@ #ifdef CONFIG_XMON extern void xmon_setup(void); extern void xmon_register_spus(struct list_head *list); +struct pt_regs; +extern int xmon(struct pt_regs *excp); #else static inline void xmon_setup(void) { }; static inline void xmon_register_spus(struct list_head *list) { }; -- cgit v1.2.3 From af3b74df1b2fa4dbfb0534818167f6393f5ae7c7 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 May 2008 14:27:15 +1000 Subject: [POWERPC] Move xmon_irq() declaration into xmon.h The typdef for irqreturn_t was moved into its own header a while back, so there's no reason we can't move xmon_irq() into xmon.h now. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/chrp/setup.c | 7 ------- arch/powerpc/platforms/powermac/pic.c | 8 +------- include/asm-powerpc/xmon.h | 3 +++ 3 files changed, 4 insertions(+), 14 deletions(-) diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 116babbaaf81..1ba7ce5aafae 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -63,13 +63,6 @@ static struct mpic *chrp_mpic; DEFINE_PER_CPU(struct timer_list, heartbeat_timer); unsigned long event_scan_interval; -/* - * XXX this should be in xmon.h, but putting it there means xmon.h - * has to include (to get irqreturn_t), which - * causes all sorts of problems. -- paulus - */ -extern irqreturn_t xmon_irq(int, void *); - extern unsigned long loops_per_jiffy; /* To be replaced by RTAS when available */ diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 829b8b02527b..6d149ae8ffa7 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -34,16 +34,10 @@ #include #include #include +#include #include "pmac.h" -/* - * XXX this should be in xmon.h, but putting it there means xmon.h - * has to include (to get irqreturn_t), which - * causes all sorts of problems. -- paulus - */ -extern irqreturn_t xmon_irq(int, void *); - #ifdef CONFIG_PPC32 struct pmac_irq_hw { unsigned int event; diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h index 81477f24a188..d83da3cbd085 100644 --- a/include/asm-powerpc/xmon.h +++ b/include/asm-powerpc/xmon.h @@ -12,11 +12,14 @@ #ifdef __KERNEL__ +#include + #ifdef CONFIG_XMON extern void xmon_setup(void); extern void xmon_register_spus(struct list_head *list); struct pt_regs; extern int xmon(struct pt_regs *excp); +extern irqreturn_t xmon_irq(int, void *); #else static inline void xmon_setup(void) { }; static inline void xmon_register_spus(struct list_head *list) { }; -- cgit v1.2.3 From 9f1067c2d98ac1c43f0c82892f5647774a6ac759 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 May 2008 14:27:16 +1000 Subject: [POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/xmon/xmon.c | 59 ++++++++++++++++++++++++------------------------ 1 file changed, 30 insertions(+), 29 deletions(-) diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 1702de9395ee..95f24c9822b1 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -154,7 +154,7 @@ static int do_spu_cmd(void); static void dump_tlb_44x(void); #endif -int xmon_no_auto_backtrace; +static int xmon_no_auto_backtrace; extern void xmon_enter(void); extern void xmon_leave(void); @@ -593,7 +593,7 @@ static int xmon_iabr_match(struct pt_regs *regs) { if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) != (MSR_IR|MSR_SF)) return 0; - if (iabr == 0) + if (iabr == NULL) return 0; xmon_core(regs, 0); return 1; @@ -1142,7 +1142,7 @@ bpt_cmds(void) } else { /* assume a breakpoint address */ bp = at_breakpoint(a); - if (bp == 0) { + if (bp == NULL) { printf("No breakpoint at %x\n", a); break; } @@ -1370,7 +1370,7 @@ static void print_bug_trap(struct pt_regs *regs) #endif } -void excprint(struct pt_regs *fp) +static void excprint(struct pt_regs *fp) { unsigned long trap; @@ -1408,7 +1408,7 @@ void excprint(struct pt_regs *fp) print_bug_trap(fp); } -void prregs(struct pt_regs *fp) +static void prregs(struct pt_regs *fp) { int n, trap; unsigned long base; @@ -1463,7 +1463,7 @@ void prregs(struct pt_regs *fp) printf("dar = "REG" dsisr = %.8lx\n", fp->dar, fp->dsisr); } -void cacheflush(void) +static void cacheflush(void) { int cmd; unsigned long nflush; @@ -1495,7 +1495,7 @@ void cacheflush(void) catch_memory_errors = 0; } -unsigned long +static unsigned long read_spr(int n) { unsigned int instrs[2]; @@ -1533,7 +1533,7 @@ read_spr(int n) return ret; } -void +static void write_spr(int n, unsigned long val) { unsigned int instrs[2]; @@ -1571,7 +1571,7 @@ static unsigned long regno; extern char exc_prolog; extern char dec_exc; -void super_regs(void) +static void super_regs(void) { int cmd; unsigned long val; @@ -1629,7 +1629,7 @@ void super_regs(void) /* * Stuff for reading and writing memory safely */ -int +static int mread(unsigned long adrs, void *buf, int size) { volatile int n; @@ -1666,7 +1666,7 @@ mread(unsigned long adrs, void *buf, int size) return n; } -int +static int mwrite(unsigned long adrs, void *buf, int size) { volatile int n; @@ -1731,7 +1731,7 @@ static int handle_fault(struct pt_regs *regs) #define SWAP(a, b, t) ((t) = (a), (a) = (b), (b) = (t)) -void +static void byterev(unsigned char *val, int size) { int t; @@ -1793,7 +1793,7 @@ static char *memex_subcmd_help_string = " x exit this mode\n" ""; -void +static void memex(void) { int cmd, inc, i, nslash; @@ -1944,7 +1944,7 @@ memex(void) } } -int +static int bsesc(void) { int c; @@ -1984,7 +1984,7 @@ static void xmon_rawdump (unsigned long adrs, long ndump) #define isxdigit(c) (('0' <= (c) && (c) <= '9') \ || ('a' <= (c) && (c) <= 'f') \ || ('A' <= (c) && (c) <= 'F')) -void +static void dump(void) { int c; @@ -2022,7 +2022,7 @@ dump(void) } } -void +static void prdump(unsigned long adrs, long ndump) { long n, m, c, r, nr; @@ -2066,7 +2066,7 @@ prdump(unsigned long adrs, long ndump) typedef int (*instruction_dump_func)(unsigned long inst, unsigned long addr); -int +static int generic_inst_dump(unsigned long adr, long count, int praddr, instruction_dump_func dump_func) { @@ -2104,7 +2104,7 @@ generic_inst_dump(unsigned long adr, long count, int praddr, return adr - first_adr; } -int +static int ppc_inst_dump(unsigned long adr, long count, int praddr) { return generic_inst_dump(adr, count, praddr, print_insn_powerpc); @@ -2126,7 +2126,7 @@ static unsigned long mval; /* byte value to set memory to */ static unsigned long mcount; /* # bytes to affect */ static unsigned long mdiffs; /* max # differences to print */ -void +static void memops(int cmd) { scanhex((void *)&mdest); @@ -2152,7 +2152,7 @@ memops(int cmd) } } -void +static void memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr) { unsigned n, prt; @@ -2170,7 +2170,7 @@ memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr) static unsigned mend; static unsigned mask; -void +static void memlocate(void) { unsigned a, n; @@ -2203,7 +2203,7 @@ memlocate(void) static unsigned long mskip = 0x1000; static unsigned long mlim = 0xffffffff; -void +static void memzcan(void) { unsigned char v; @@ -2230,7 +2230,7 @@ memzcan(void) printf("%.8x\n", a - mskip); } -void proccall(void) +static void proccall(void) { unsigned long args[8]; unsigned long ret; @@ -2388,7 +2388,7 @@ scanhex(unsigned long *vp) return 1; } -void +static void scannl(void) { int c; @@ -2399,7 +2399,7 @@ scannl(void) c = inchar(); } -int hexdigit(int c) +static int hexdigit(int c) { if( '0' <= c && c <= '9' ) return c - '0'; @@ -2430,13 +2430,13 @@ getstring(char *s, int size) static char line[256]; static char *lineptr; -void +static void flush_input(void) { lineptr = NULL; } -int +static int inchar(void) { if (lineptr == NULL || *lineptr == 0) { @@ -2449,7 +2449,7 @@ inchar(void) return *lineptr++; } -void +static void take_input(char *str) { lineptr = str; @@ -2618,7 +2618,8 @@ static void dump_tlb_44x(void) } } #endif /* CONFIG_44x */ -void xmon_init(int enable) + +static void xmon_init(int enable) { #ifdef CONFIG_PPC_ISERIES if (firmware_has_feature(FW_FEATURE_ISERIES)) -- cgit v1.2.3 From 1c8950ff87de950a3b6ccfb26650fc0a56278836 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 May 2008 14:27:17 +1000 Subject: [POWERPC] Make cpus_in_xmon static and remove extern mess from hvc_console.c This is a little messier than I'd like because xmon.h only exists on powerpc and we can't have a static inline and an extern declaration visible at the same time. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/xmon/xmon.c | 7 ++++++- drivers/char/hvc_console.c | 8 +------- drivers/char/hvc_console.h | 10 ++++++++++ include/asm-powerpc/xmon.h | 4 ++++ 4 files changed, 21 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 95f24c9822b1..6726da07c065 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -54,7 +54,7 @@ #define skipbl xmon_skipbl #ifdef CONFIG_SMP -cpumask_t cpus_in_xmon = CPU_MASK_NONE; +static cpumask_t cpus_in_xmon = CPU_MASK_NONE; static unsigned long xmon_taken = 1; static int xmon_owner; static int xmon_gate; @@ -327,6 +327,11 @@ static void release_output_lock(void) { xmon_speaker = 0; } + +int cpus_are_in_xmon(void) +{ + return !cpus_empty(cpus_in_xmon); +} #endif static int xmon_core(struct pt_regs *regs, int fromipi) diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index 44160d5ebca0..2f9759d625cc 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -675,12 +675,6 @@ static int hvc_poll(struct hvc_struct *hp) return poll_mask; } -#if defined(CONFIG_XMON) && defined(CONFIG_SMP) -extern cpumask_t cpus_in_xmon; -#else -static const cpumask_t cpus_in_xmon = CPU_MASK_NONE; -#endif - /* * This kthread is either polling or interrupt driven. This is determined by * calling hvc_poll() who determines whether a console adapter support @@ -698,7 +692,7 @@ static int khvcd(void *unused) hvc_kicked = 0; try_to_freeze(); wmb(); - if (cpus_empty(cpus_in_xmon)) { + if (!cpus_are_in_xmon()) { spin_lock(&hvc_structs_lock); list_for_each_entry(hp, &hvc_structs, next) { poll_mask |= hvc_poll(hp); diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h index 8c59818050e6..42ffb17e15df 100644 --- a/drivers/char/hvc_console.h +++ b/drivers/char/hvc_console.h @@ -60,4 +60,14 @@ extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int irq, /* remove a vterm from hvc tty operation (modele_exit or hotplug remove) */ extern int __devexit hvc_remove(struct hvc_struct *hp); + +#if defined(CONFIG_XMON) && defined(CONFIG_SMP) +#include +#else +static inline int cpus_are_in_xmon(void) +{ + return 0; +} +#endif + #endif // HVC_CONSOLE_H diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h index d83da3cbd085..5eb8e599e5cc 100644 --- a/include/asm-powerpc/xmon.h +++ b/include/asm-powerpc/xmon.h @@ -25,5 +25,9 @@ static inline void xmon_setup(void) { }; static inline void xmon_register_spus(struct list_head *list) { }; #endif +#if defined(CONFIG_XMON) && defined(CONFIG_SMP) +extern int cpus_are_in_xmon(void); +#endif + #endif /* __KERNEL __ */ #endif /* __ASM_POWERPC_XMON_H */ -- cgit v1.2.3 From 1c21a2937b1f342a8f5d580203c3396557d53b6e Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 May 2008 14:27:19 +1000 Subject: [POWERPC] Fix sparse warnings in arch/powerpc/kernel Make a few things static in lparcfg.c Make init and exit routines static in rtas_flash.c Make things static in rtas_pci.c Make some functions static in rtas.c Make fops static in rtas-proc.c Remove unneeded extern for do_gtod in smp.c Make clocksource_init() static in time.c Make last_tick_len and ticklen_to_xs static in time.c Move the declaration of the pvr per-cpu into smp.h Make kexec_smp_down() and kexec_stack static in machine_kexec_64.c Don't return void in arch_teardown_msi_irqs() in msi.c Move declaration of GregorianDay()into asm/time.h Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/lparcfg.c | 6 +++--- arch/powerpc/kernel/machine_kexec_64.c | 4 ++-- arch/powerpc/kernel/msi.c | 2 +- arch/powerpc/kernel/rtas-proc.c | 14 +++++++------- arch/powerpc/kernel/rtas.c | 6 +++--- arch/powerpc/kernel/rtas_flash.c | 4 ++-- arch/powerpc/kernel/rtas_pci.c | 4 ++-- arch/powerpc/kernel/smp.c | 4 ---- arch/powerpc/kernel/time.c | 10 +++++----- arch/powerpc/platforms/maple/time.c | 2 -- include/asm-powerpc/smp.h | 2 ++ include/asm-powerpc/time.h | 1 + 12 files changed, 28 insertions(+), 31 deletions(-) diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 1e656b43ad7f..827a5726a035 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -573,7 +573,7 @@ static int lparcfg_open(struct inode *inode, struct file *file) return single_open(file, lparcfg_data, NULL); } -const struct file_operations lparcfg_fops = { +static const struct file_operations lparcfg_fops = { .owner = THIS_MODULE, .read = seq_read, .write = lparcfg_write, @@ -581,7 +581,7 @@ const struct file_operations lparcfg_fops = { .release = single_release, }; -int __init lparcfg_init(void) +static int __init lparcfg_init(void) { struct proc_dir_entry *ent; mode_t mode = S_IRUSR | S_IRGRP | S_IROTH; @@ -601,7 +601,7 @@ int __init lparcfg_init(void) return 0; } -void __exit lparcfg_cleanup(void) +static void __exit lparcfg_cleanup(void) { if (proc_ppc64_lparcfg) remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent); diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index 704375bda73a..631dfd614b21 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -158,7 +158,7 @@ void kexec_copy_flush(struct kimage *image) * on calling the interrupts, but we would like to call it off irq level * so that the interrupt controller is clean. */ -void kexec_smp_down(void *arg) +static void kexec_smp_down(void *arg) { if (ppc_md.kexec_cpu_down) ppc_md.kexec_cpu_down(0, 1); @@ -249,7 +249,7 @@ static void kexec_prepare_cpus(void) * We could use a smaller stack if we don't care about anything using * current, but that audit has not been performed. */ -union thread_union kexec_stack +static union thread_union kexec_stack __attribute__((__section__(".data.init_task"))) = { }; /* Our assembly helper, in kexec_stub.S */ diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c index c62d1012c013..3bb7d3dd28be 100644 --- a/arch/powerpc/kernel/msi.c +++ b/arch/powerpc/kernel/msi.c @@ -34,5 +34,5 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) void arch_teardown_msi_irqs(struct pci_dev *dev) { - return ppc_md.teardown_msi_irqs(dev); + ppc_md.teardown_msi_irqs(dev); } diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index f9c6abc84a94..1be9fe38bcb5 100644 --- a/arch/powerpc/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c @@ -160,7 +160,7 @@ static int sensors_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_sensors_show, NULL); } -const struct file_operations ppc_rtas_sensors_operations = { +static const struct file_operations ppc_rtas_sensors_operations = { .open = sensors_open, .read = seq_read, .llseek = seq_lseek, @@ -172,7 +172,7 @@ static int poweron_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_poweron_show, NULL); } -const struct file_operations ppc_rtas_poweron_operations = { +static const struct file_operations ppc_rtas_poweron_operations = { .open = poweron_open, .read = seq_read, .llseek = seq_lseek, @@ -185,7 +185,7 @@ static int progress_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_progress_show, NULL); } -const struct file_operations ppc_rtas_progress_operations = { +static const struct file_operations ppc_rtas_progress_operations = { .open = progress_open, .read = seq_read, .llseek = seq_lseek, @@ -198,7 +198,7 @@ static int clock_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_clock_show, NULL); } -const struct file_operations ppc_rtas_clock_operations = { +static const struct file_operations ppc_rtas_clock_operations = { .open = clock_open, .read = seq_read, .llseek = seq_lseek, @@ -211,7 +211,7 @@ static int tone_freq_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_tone_freq_show, NULL); } -const struct file_operations ppc_rtas_tone_freq_operations = { +static const struct file_operations ppc_rtas_tone_freq_operations = { .open = tone_freq_open, .read = seq_read, .llseek = seq_lseek, @@ -224,7 +224,7 @@ static int tone_volume_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_tone_volume_show, NULL); } -const struct file_operations ppc_rtas_tone_volume_operations = { +static const struct file_operations ppc_rtas_tone_volume_operations = { .open = tone_volume_open, .read = seq_read, .llseek = seq_lseek, @@ -237,7 +237,7 @@ static int rmo_buf_open(struct inode *inode, struct file *file) return single_open(file, ppc_rtas_rmo_buf_show, NULL); } -const struct file_operations ppc_rtas_rmo_buf_ops = { +static const struct file_operations ppc_rtas_rmo_buf_ops = { .open = rmo_buf_open, .read = seq_read, .llseek = seq_lseek, diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 34843c318419..2a60bd3e3afa 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -340,8 +340,8 @@ int rtas_get_error_log_max(void) EXPORT_SYMBOL(rtas_get_error_log_max); -char rtas_err_buf[RTAS_ERROR_LOG_MAX]; -int rtas_last_error_token; +static char rtas_err_buf[RTAS_ERROR_LOG_MAX]; +static int rtas_last_error_token; /** Return a copy of the detailed error text associated with the * most recent failed call to rtas. Because the error text @@ -484,7 +484,7 @@ unsigned int rtas_busy_delay(int status) } EXPORT_SYMBOL(rtas_busy_delay); -int rtas_error_rc(int rtas_rc) +static int rtas_error_rc(int rtas_rc) { int rc; diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 0a5e22b22729..09ded5c424a9 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -731,7 +731,7 @@ static const struct file_operations validate_flash_operations = { .release = validate_flash_release, }; -int __init rtas_flash_init(void) +static int __init rtas_flash_init(void) { int rc; @@ -817,7 +817,7 @@ cleanup: return rc; } -void __exit rtas_flash_cleanup(void) +static void __exit rtas_flash_cleanup(void) { rtas_flash_term_hook = NULL; diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 3ab88a9dc70d..589a2797eac2 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -155,12 +155,12 @@ static int rtas_pci_write_config(struct pci_bus *bus, return PCIBIOS_DEVICE_NOT_FOUND; } -struct pci_ops rtas_pci_ops = { +static struct pci_ops rtas_pci_ops = { .read = rtas_pci_read_config, .write = rtas_pci_write_config, }; -int is_python(struct device_node *dev) +static int is_python(struct device_node *dev) { const char *model = of_get_property(dev, "model", NULL); diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 1457aa0a08f1..ba7989ffaeee 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -365,12 +365,8 @@ void smp_call_function_interrupt(void) } } -extern struct gettimeofday_struct do_gtod; - struct thread_info *current_set[NR_CPUS]; -DECLARE_PER_CPU(unsigned int, pvr); - static void __devinit smp_store_cpu_info(int id) { per_cpu(pvr, id) = mfspr(SPRN_PVR); diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 73401e83739a..c73fc33aa817 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -129,7 +129,7 @@ static unsigned long __initdata iSeries_recal_titan; static signed long __initdata iSeries_recal_tb; /* Forward declaration is only needed for iSereis compiles */ -void __init clocksource_init(void); +static void __init clocksource_init(void); #endif #define XSEC_PER_SEC (1024*1024) @@ -150,8 +150,8 @@ u64 tb_to_xs; unsigned tb_to_us; #define TICKLEN_SCALE NTP_SCALE_SHIFT -u64 last_tick_len; /* units are ns / 2^TICKLEN_SCALE */ -u64 ticklen_to_xs; /* 0.64 fraction */ +static u64 last_tick_len; /* units are ns / 2^TICKLEN_SCALE */ +static u64 ticklen_to_xs; /* 0.64 fraction */ /* If last_tick_len corresponds to about 1/HZ seconds, then last_tick_len << TICKLEN_SHIFT will be about 2^63. */ @@ -164,7 +164,7 @@ static u64 tb_to_ns_scale __read_mostly; static unsigned tb_to_ns_shift __read_mostly; static unsigned long boot_tb __read_mostly; -struct gettimeofday_struct do_gtod; +static struct gettimeofday_struct do_gtod; extern struct timezone sys_tz; static long timezone_offset; @@ -832,7 +832,7 @@ void update_vsyscall_tz(void) ++vdso_data->tb_update_count; } -void __init clocksource_init(void) +static void __init clocksource_init(void) { struct clocksource *clock; diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c index 9f7579b38c72..53bca132fb48 100644 --- a/arch/powerpc/platforms/maple/time.c +++ b/arch/powerpc/platforms/maple/time.c @@ -41,8 +41,6 @@ #define DBG(x...) #endif -extern void GregorianDay(struct rtc_time * tm); - static int maple_rtc_addr; static int maple_clock_read(int addr) diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h index 505f35bacaa9..1cd43e3d94fb 100644 --- a/include/asm-powerpc/smp.h +++ b/include/asm-powerpc/smp.h @@ -37,6 +37,8 @@ extern void cpu_die(void); extern void smp_send_debugger_break(int cpu); extern void smp_message_recv(int); +DECLARE_PER_CPU(unsigned int, pvr); + #ifdef CONFIG_HOTPLUG_CPU extern void fixup_irqs(cpumask_t map); int generic_cpu_disable(void); diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h index ce5de6e0e690..febd581ec9b0 100644 --- a/include/asm-powerpc/time.h +++ b/include/asm-powerpc/time.h @@ -33,6 +33,7 @@ extern unsigned tb_to_us; struct rtc_time; extern void to_tm(int tim, struct rtc_time * tm); +extern void GregorianDay(struct rtc_time *tm); extern time_t last_rtc_update; extern void generic_calibrate_decr(void); -- cgit v1.2.3 From 3ff1999b2c84e1486e80fbd3ca12b1663dc3408b Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 May 2008 14:27:21 +1000 Subject: [POWERPC] pseries/firmware.c should include pseries/pseries.h The declaration for fw_feature_init() is in pseries.h and implemented in firmware.c, so the latter should include the former. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/firmware.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c index 9d3a40f45974..5a707da3f5c2 100644 --- a/arch/powerpc/platforms/pseries/firmware.c +++ b/arch/powerpc/platforms/pseries/firmware.c @@ -26,6 +26,7 @@ #include #include +#include "pseries.h" typedef struct { unsigned long val; -- cgit v1.2.3 From 541b2755c2ef7dd2242ac606c115daa11e43ef69 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 8 May 2008 14:27:23 +1000 Subject: [POWERPC] Fix sparse warnings in arch/powerpc/platforms/pseries Don't return void in pseries/iommu.c Make mce_data_buf static in pseries/ras.c Make things static in pseries/rtasd.c Make things static in pseries/setup.c vtermno may as well be static in platforms/pseries/lpar.c Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/iommu.c | 15 +++++++++------ arch/powerpc/platforms/pseries/lpar.c | 2 +- arch/powerpc/platforms/pseries/ras.c | 2 +- arch/powerpc/platforms/pseries/rtasd.c | 4 ++-- arch/powerpc/platforms/pseries/setup.c | 4 ++-- 5 files changed, 15 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 176f1f39d2d5..9a12908510fb 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -135,9 +135,10 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, u64 rpn; long l, limit; - if (npages == 1) - return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, - direction); + if (npages == 1) { + tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, direction); + return; + } tcep = __get_cpu_var(tce_page); @@ -147,9 +148,11 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, if (!tcep) { tcep = (u64 *)__get_free_page(GFP_ATOMIC); /* If allocation fails, fall back to the loop implementation */ - if (!tcep) - return tce_build_pSeriesLP(tbl, tcenum, npages, - uaddr, direction); + if (!tcep) { + tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, + direction); + return; + } __get_cpu_var(tce_page) = tcep; } diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 2cbaedb17f3e..3b4651b6ee05 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -52,7 +52,7 @@ EXPORT_SYMBOL(plpar_hcall_norets); extern void pSeries_find_serial_port(void); -int vtermno; /* virtual terminal# for udbg */ +static int vtermno; /* virtual terminal# for udbg */ #define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) static void udbg_hvsi_putc(char c) diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 2b548afd1003..d20b96e22c2e 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -55,7 +55,7 @@ static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(ras_log_buf_lock); -char mce_data_buf[RTAS_ERROR_LOG_MAX]; +static char mce_data_buf[RTAS_ERROR_LOG_MAX]; static int ras_get_sensor_state_token; static int ras_check_exception_token; diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index 7d3e2b0bd4d2..c9ffd8c225f1 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -32,7 +32,7 @@ static DEFINE_SPINLOCK(rtasd_log_lock); -DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait); +static DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait); static char *rtas_log_buf; static unsigned long rtas_log_start; @@ -329,7 +329,7 @@ static unsigned int rtas_log_poll(struct file *file, poll_table * wait) return 0; } -const struct file_operations proc_rtas_log_operations = { +static const struct file_operations proc_rtas_log_operations = { .read = rtas_log_read, .poll = rtas_log_poll, .open = rtas_log_open, diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index f5d29f5b13c1..90beb444e1dd 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -109,7 +109,7 @@ static void __init fwnmi_init(void) fwnmi_active = 1; } -void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc) +static void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc) { unsigned int cascade_irq = i8259_irq(); if (cascade_irq != NO_IRQ) @@ -482,7 +482,7 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus) * possible with power button press. If ibm,power-off-ups token is used * it will allow auto poweron after power is restored. */ -void pSeries_power_off(void) +static void pSeries_power_off(void) { int rc; int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups"); -- cgit v1.2.3 From a560643e21e1ac10f7398b45111aecdd7f47a4a5 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 14 May 2008 14:30:48 +1000 Subject: [POWERPC] Defer processing of interrupts when the CPU wakes from sleep mode This provides a way to defer processing of an interrupt that wakes the processor out of sleep mode. On 32-bit platforms that use an interrupt to wake the processor, we have to have interrupts enabled in hardware at the point where we go to sleep, otherwise the processor will never wake up. However, because interrupts are logically disabled at this point, we don't want to process the interrupt straight away. This is handled by setting the _TLF_SLEEPING flag. When we get an interrupt and _TLF_SLEEPING is set, we firstly clear the MSR_EE (external interrupt enable) bit in the saved MSR value, and secondly we then return to the address in the link register, like we do for _TLF_NAPPING, but without actually handling the interrupt. Note that this is handled somewhat differently on powerbooks, so this new code will only be used on non-Apple machines. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/entry_32.S | 8 ++++++++ include/asm-powerpc/thread_info.h | 4 +++- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 3a05e9f93d42..888a364043a8 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -147,6 +147,7 @@ transfer_to_handler: lwz r12,TI_LOCAL_FLAGS(r9) mtcrf 0x01,r12 bt- 31-TLF_NAPPING,4f + bt- 31-TLF_SLEEPING,7f #endif /* CONFIG_6xx */ .globl transfer_to_handler_cont transfer_to_handler_cont: @@ -164,6 +165,13 @@ transfer_to_handler_cont: 4: rlwinm r12,r12,0,~_TLF_NAPPING stw r12,TI_LOCAL_FLAGS(r9) b power_save_6xx_restore + +7: rlwinm r12,r12,0,~_TLF_SLEEPING + stw r12,TI_LOCAL_FLAGS(r9) + lwz r9,_MSR(r11) /* if sleeping, clear MSR.EE */ + rlwinm r9,r9,0,~MSR_EE + lwz r12,_LINK(r11) /* and return to address in LR */ + b fast_exception_return #endif /* diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h index e079e81051fd..b705c2a7651a 100644 --- a/include/asm-powerpc/thread_info.h +++ b/include/asm-powerpc/thread_info.h @@ -144,9 +144,11 @@ static inline struct thread_info *current_thread_info(void) /* Bits in local_flags */ /* Don't move TLF_NAPPING without adjusting the code in entry_32.S */ #define TLF_NAPPING 0 /* idle thread enabled NAP mode */ -#define TLF_RESTORE_SIGMASK 1 /* Restore signal mask in do_signal */ +#define TLF_SLEEPING 1 /* suspend code enabled SLEEP mode */ +#define TLF_RESTORE_SIGMASK 2 /* Restore signal mask in do_signal */ #define _TLF_NAPPING (1 << TLF_NAPPING) +#define _TLF_SLEEPING (1 << TLF_SLEEPING) #define _TLF_RESTORE_SIGMASK (1 << TLF_RESTORE_SIGMASK) #ifndef __ASSEMBLY__ -- cgit v1.2.3 From 0b2cca804ee40495bc92449c3e22f3c3a3f2977a Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Tue, 29 Apr 2008 01:38:13 +1000 Subject: [POWERPC] Add 6xx-style HID0_SLEEP support. This adds a function to put a 6xx/7xx/7xxx/83xx family CPU into sleep mode, and return after an interrupt has occurred. It expects to be called with interrupts disabled, and returns with interrupts disabled. Interrupts are enabled while the processor is asleep, but the interrupt that wakes the processor is not handled; it is still pending when this function returns. Signed-off-by: Scott Wood Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/6xx-suspend.S | 52 +++++++++++++++++++++++++++++++++++++++ arch/powerpc/sysdev/Makefile | 4 +++ include/asm-powerpc/mpc6xx.h | 6 +++++ 3 files changed, 62 insertions(+) create mode 100644 arch/powerpc/sysdev/6xx-suspend.S create mode 100644 include/asm-powerpc/mpc6xx.h diff --git a/arch/powerpc/sysdev/6xx-suspend.S b/arch/powerpc/sysdev/6xx-suspend.S new file mode 100644 index 000000000000..21cda085d926 --- /dev/null +++ b/arch/powerpc/sysdev/6xx-suspend.S @@ -0,0 +1,52 @@ +/* + * Enter and leave sleep state on chips with 6xx-style HID0 + * power management bits, which don't leave sleep state via reset. + * + * Author: Scott Wood + * + * Copyright (c) 2006-2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include + +_GLOBAL(mpc6xx_enter_standby) + mflr r4 + + mfspr r5, SPRN_HID0 + rlwinm r5, r5, 0, ~(HID0_DOZE | HID0_NAP) + oris r5, r5, HID0_SLEEP@h + mtspr SPRN_HID0, r5 + isync + + lis r5, ret_from_standby@h + ori r5, r5, ret_from_standby@l + mtlr r5 + + rlwinm r5, r1, 0, 0, 31-THREAD_SHIFT + lwz r6, TI_LOCAL_FLAGS(r5) + ori r6, r6, _TLF_SLEEPING + stw r6, TI_LOCAL_FLAGS(r5) + + mfmsr r5 + ori r5, r5, MSR_EE + oris r5, r5, MSR_POW@h + sync + mtmsr r5 + isync + +1: b 1b + +ret_from_standby: + mfspr r5, SPRN_HID0 + rlwinm r5, r5, 0, ~HID0_SLEEP + mtspr SPRN_HID0, r5 + + mtlr r4 + blr diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 6d386d0071a0..2cc50520a698 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -44,3 +44,7 @@ obj-$(CONFIG_PPC_DCR) += dcr.o obj-$(CONFIG_8xx) += mpc8xx_pic.o cpm1.o obj-$(CONFIG_UCODE_PATCH) += micropatch.o endif + +ifeq ($(CONFIG_SUSPEND),y) +obj-$(CONFIG_6xx) += 6xx-suspend.o +endif diff --git a/include/asm-powerpc/mpc6xx.h b/include/asm-powerpc/mpc6xx.h new file mode 100644 index 000000000000..effc2291beb2 --- /dev/null +++ b/include/asm-powerpc/mpc6xx.h @@ -0,0 +1,6 @@ +#ifndef __ASM_POWERPC_MPC6xx_H +#define __ASM_POWERPC_MPC6xx_H + +void mpc6xx_enter_standby(void); + +#endif -- cgit v1.2.3 From 7bc228b1ef71f395aeb89bdf81bf95556b08b374 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 15 May 2008 05:16:44 +1000 Subject: [POWERPC] Get most of ioctl.h content from Now that allows overriding of the most commonly changed macros, take advantage of that. Signed-off-by: Robert P. J. Day Signed-off-by: Paul Mackerras --- include/asm-powerpc/ioctl.h | 58 +-------------------------------------------- 1 file changed, 1 insertion(+), 57 deletions(-) diff --git a/include/asm-powerpc/ioctl.h b/include/asm-powerpc/ioctl.h index 8eb99848c402..57d68304218b 100644 --- a/include/asm-powerpc/ioctl.h +++ b/include/asm-powerpc/ioctl.h @@ -1,69 +1,13 @@ #ifndef _ASM_POWERPC_IOCTL_H #define _ASM_POWERPC_IOCTL_H - -/* - * this was copied from the alpha as it's a bit cleaner there. - * -- Cort - */ - -#define _IOC_NRBITS 8 -#define _IOC_TYPEBITS 8 #define _IOC_SIZEBITS 13 #define _IOC_DIRBITS 3 -#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) -#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) -#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) -#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) - -#define _IOC_NRSHIFT 0 -#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS) -#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS) -#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS) - -/* - * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit. - * And this turns out useful to catch old ioctl numbers in header - * files for us. - */ #define _IOC_NONE 1U #define _IOC_READ 2U #define _IOC_WRITE 4U -#define _IOC(dir,type,nr,size) \ - (((dir) << _IOC_DIRSHIFT) | \ - ((type) << _IOC_TYPESHIFT) | \ - ((nr) << _IOC_NRSHIFT) | \ - ((size) << _IOC_SIZESHIFT)) - -/* provoke compile error for invalid uses of size argument */ -extern unsigned int __invalid_size_argument_for_IOC; -#define _IOC_TYPECHECK(t) \ - ((sizeof(t) == sizeof(t[1]) && \ - sizeof(t) < (1 << _IOC_SIZEBITS)) ? \ - sizeof(t) : __invalid_size_argument_for_IOC) - -/* used to create numbers */ -#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0) -#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size))) -#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size))) -#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size))) -#define _IOR_BAD(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size)) -#define _IOW_BAD(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size)) -#define _IOWR_BAD(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size)) - -/* used to decode them.. */ -#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) -#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) -#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) -#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK) - -/* various drivers, such as the pcmcia stuff, need these... */ -#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) -#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) -#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) -#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT) -#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) +#include #endif /* _ASM_POWERPC_IOCTL_H */ -- cgit v1.2.3 From 09e67ca2c523544e6b38aa570a5f62a0cf20b87b Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 16 May 2008 11:57:45 +1000 Subject: [POWERPC] Move of_device_get_modalias to drivers/of Commit 140b932f8cb6cced10b96860651a198b1b89cbb9 ("Create modalias file in sysfs for of_platform bus") needs this to avoid breaking the sparc builds. Just move the code and add whitespace around some binary operators. Signed-off-by: Stephen Rothwell Acked-by: David S. Miller Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/of_device.c | 48 ----------------------------------------- drivers/of/device.c | 48 +++++++++++++++++++++++++++++++++++++++++ include/asm-powerpc/of_device.h | 2 -- include/linux/of_device.h | 3 +++ 4 files changed, 51 insertions(+), 50 deletions(-) diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c index 5748ddb47d9f..e9be908f199b 100644 --- a/arch/powerpc/kernel/of_device.c +++ b/arch/powerpc/kernel/of_device.c @@ -89,54 +89,6 @@ struct of_device *of_device_alloc(struct device_node *np, } EXPORT_SYMBOL(of_device_alloc); -ssize_t of_device_get_modalias(struct of_device *ofdev, - char *str, ssize_t len) -{ - const char *compat; - int cplen, i; - ssize_t tsize, csize, repend; - - /* Name & Type */ - csize = snprintf(str, len, "of:N%sT%s", - ofdev->node->name, ofdev->node->type); - - /* Get compatible property if any */ - compat = of_get_property(ofdev->node, "compatible", &cplen); - if (!compat) - return csize; - - /* Find true end (we tolerate multiple \0 at the end */ - for (i=(cplen-1); i>=0 && !compat[i]; i--) - cplen--; - if (!cplen) - return csize; - cplen++; - - /* Check space (need cplen+1 chars including final \0) */ - tsize = csize + cplen; - repend = tsize; - - if (csize>=len) /* @ the limit, all is already filled */ - return tsize; - - if (tsize>=len) { /* limit compat list */ - cplen = len-csize-1; - repend = len; - } - - /* Copy and do char replacement */ - memcpy(&str[csize+1], compat, cplen); - for (i=csize; idev); } EXPORT_SYMBOL(of_device_unregister); + +ssize_t of_device_get_modalias(struct of_device *ofdev, + char *str, ssize_t len) +{ + const char *compat; + int cplen, i; + ssize_t tsize, csize, repend; + + /* Name & Type */ + csize = snprintf(str, len, "of:N%sT%s", + ofdev->node->name, ofdev->node->type); + + /* Get compatible property if any */ + compat = of_get_property(ofdev->node, "compatible", &cplen); + if (!compat) + return csize; + + /* Find true end (we tolerate multiple \0 at the end */ + for (i = (cplen - 1); i >= 0 && !compat[i]; i--) + cplen--; + if (!cplen) + return csize; + cplen++; + + /* Check space (need cplen+1 chars including final \0) */ + tsize = csize + cplen; + repend = tsize; + + if (csize >= len) /* @ the limit, all is already filled */ + return tsize; + + if (tsize >= len) { /* limit compat list */ + cplen = len - csize - 1; + repend = len; + } + + /* Copy and do char replacement */ + memcpy(&str[csize + 1], compat, cplen); + for (i = csize; i < repend; i++) { + char c = str[i]; + if (c == '\0') + str[i] = 'C'; + else if (c == ' ') + str[i] = '_'; + } + + return tsize; +} diff --git a/include/asm-powerpc/of_device.h b/include/asm-powerpc/of_device.h index 6526e139a463..3c123990ca2e 100644 --- a/include/asm-powerpc/of_device.h +++ b/include/asm-powerpc/of_device.h @@ -21,8 +21,6 @@ extern struct of_device *of_device_alloc(struct device_node *np, const char *bus_id, struct device *parent); -extern ssize_t of_device_get_modalias(struct of_device *ofdev, - char *str, ssize_t len); extern int of_device_uevent(struct device *dev, struct kobj_uevent_env *env); diff --git a/include/linux/of_device.h b/include/linux/of_device.h index afe338217d91..d3a74e00a3e1 100644 --- a/include/linux/of_device.h +++ b/include/linux/of_device.h @@ -24,4 +24,7 @@ static inline void of_device_free(struct of_device *dev) of_release_dev(&dev->dev); } +extern ssize_t of_device_get_modalias(struct of_device *ofdev, + char *str, ssize_t len); + #endif /* _LINUX_OF_DEVICE_H */ -- cgit v1.2.3 From 493d35863dbb692c38c1415fd83d88dfb902ae37 Mon Sep 17 00:00:00 2001 From: Jeremy Kerr Date: Wed, 14 May 2008 16:22:58 -0700 Subject: mutex-debug: check mutex magic before owner Currently, the mutex debug code checks the lock->owner before lock->magic, so a corrupt mutex will most likely result in failing the owner check, rather than the magic check. This change to debug_mutex_unlock does the magic check first, so we have a better idea of what breaks. Signed-off-by: Jeremy Kerr Acked-by: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/mutex-debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/mutex-debug.c b/kernel/mutex-debug.c index 3aaa06c561de..1d94160eb532 100644 --- a/kernel/mutex-debug.c +++ b/kernel/mutex-debug.c @@ -79,8 +79,8 @@ void debug_mutex_unlock(struct mutex *lock) if (unlikely(!debug_locks)) return; - DEBUG_LOCKS_WARN_ON(lock->owner != current_thread_info()); DEBUG_LOCKS_WARN_ON(lock->magic != lock); + DEBUG_LOCKS_WARN_ON(lock->owner != current_thread_info()); DEBUG_LOCKS_WARN_ON(!lock->wait_list.prev && !lock->wait_list.next); DEBUG_LOCKS_WARN_ON(lock->owner != current_thread_info()); } -- cgit v1.2.3 From dedd4915af40cff6614707c50dcae43d17beadec Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 17 May 2008 08:28:33 +0200 Subject: bitops: fix build in struct thread_info we can move flags from u32 to natural size - assembly code uses offsetof. Signed-off-by: Ingo Molnar --- include/asm-x86/thread_info.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 74481b72ae0f..25d710532561 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -24,10 +24,10 @@ struct exec_domain; struct thread_info { struct task_struct *task; /* main task structure */ struct exec_domain *exec_domain; /* execution domain */ - __u32 flags; /* low level flags */ + unsigned long flags; /* low level flags */ __u32 status; /* thread synchronous flags */ __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, + int preempt_count; /* 0 => preemptable, <0 => BUG */ mm_segment_t addr_limit; struct restart_block restart_block; -- cgit v1.2.3 From 75bd2ef1457998791cfc89cd59927574488fc22a Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 15 May 2008 09:09:23 -0600 Subject: bsg: cdev lock_kernel() pushdown Push the cdev lock_kernel call into bsg_open(). Signed-off-by: Jonathan Corbet --- block/bsg.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/block/bsg.c b/block/bsg.c index f0b7cd343216..dbe3ffd505ca 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -834,7 +835,11 @@ static struct bsg_device *bsg_get_device(struct inode *inode, struct file *file) static int bsg_open(struct inode *inode, struct file *file) { - struct bsg_device *bd = bsg_get_device(inode, file); + struct bsg_device *bd; + + lock_kernel(); + bd = bsg_get_device(inode, file); + unlock_kernel(); if (IS_ERR(bd)) return PTR_ERR(bd); -- cgit v1.2.3 From 0c401df37ef9f45f35390a5574e24cbf3f916acf Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 15 May 2008 09:10:18 -0600 Subject: cris: cdev lock_kernel() pushdown Push the cdev lock_kernel() call into cris drivers. Signed-off-by: Jonathan Corbet --- arch/cris/arch-v10/drivers/gpio.c | 3 +++ arch/cris/arch-v10/drivers/sync_serial.c | 34 +++++++++++++++++++------------ arch/cris/arch-v32/drivers/mach-a3/gpio.c | 4 ++++ arch/cris/arch-v32/drivers/mach-fs/gpio.c | 5 ++++- arch/cris/arch-v32/drivers/sync_serial.c | 33 ++++++++++++++++++------------ 5 files changed, 52 insertions(+), 27 deletions(-) diff --git a/arch/cris/arch-v10/drivers/gpio.c b/arch/cris/arch-v10/drivers/gpio.c index 68a998bd1069..86048e697eb5 100644 --- a/arch/cris/arch-v10/drivers/gpio.c +++ b/arch/cris/arch-v10/drivers/gpio.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -323,6 +324,7 @@ gpio_open(struct inode *inode, struct file *filp) if (!priv) return -ENOMEM; + lock_kernel(); priv->minor = p; /* initialize the io/alarm struct */ @@ -357,6 +359,7 @@ gpio_open(struct inode *inode, struct file *filp) alarmlist = priv; spin_unlock_irqrestore(&gpio_lock, flags); + unlock_kernel(); return 0; } diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c index 069546e342c5..91fea623c7c9 100644 --- a/arch/cris/arch-v10/drivers/sync_serial.c +++ b/arch/cris/arch-v10/drivers/sync_serial.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -443,18 +444,21 @@ static int sync_serial_open(struct inode *inode, struct file *file) int dev = MINOR(inode->i_rdev); struct sync_port *port; int mode; + int err = -EBUSY; + lock_kernel(); DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev)); if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) { DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); - return -ENODEV; + err = -ENODEV; + goto out; } port = &ports[dev]; /* Allow open this device twice (assuming one reader and one writer) */ if (port->busy == 2) { DEBUG(printk(KERN_DEBUG "Device is busy.. \n")); - return -EBUSY; + goto out; } if (port->init_irqs) { if (port->use_dma) { @@ -465,14 +469,14 @@ static int sync_serial_open(struct inode *inode, struct file *file) &ports[0])) { printk(KERN_CRIT "Can't alloc " "sync serial port 1 IRQ"); - return -EBUSY; + goto out; } else if (request_irq(25, rx_interrupt, 0, "synchronous serial 1 dma rx", &ports[0])) { free_irq(24, &port[0]); printk(KERN_CRIT "Can't alloc " "sync serial port 1 IRQ"); - return -EBUSY; + goto out; } else if (cris_request_dma(8, "synchronous serial 1 dma tr", DMA_VERBOSE_ON_ERROR, @@ -482,7 +486,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) printk(KERN_CRIT "Can't alloc " "sync serial port 1 " "TX DMA channel"); - return -EBUSY; + goto out; } else if (cris_request_dma(9, "synchronous serial 1 dma rec", DMA_VERBOSE_ON_ERROR, @@ -493,7 +497,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) printk(KERN_CRIT "Can't alloc " "sync serial port 1 " "RX DMA channel"); - return -EBUSY; + goto out; } #endif RESET_DMA(8); WAIT_DMA(8); @@ -520,14 +524,14 @@ static int sync_serial_open(struct inode *inode, struct file *file) &ports[1])) { printk(KERN_CRIT "Can't alloc " "sync serial port 3 IRQ"); - return -EBUSY; + goto out; } else if (request_irq(21, rx_interrupt, 0, "synchronous serial 3 dma rx", &ports[1])) { free_irq(20, &ports[1]); printk(KERN_CRIT "Can't alloc " "sync serial port 3 IRQ"); - return -EBUSY; + goto out; } else if (cris_request_dma(4, "synchronous serial 3 dma tr", DMA_VERBOSE_ON_ERROR, @@ -537,7 +541,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) printk(KERN_CRIT "Can't alloc " "sync serial port 3 " "TX DMA channel"); - return -EBUSY; + goto out; } else if (cris_request_dma(5, "synchronous serial 3 dma rec", DMA_VERBOSE_ON_ERROR, @@ -548,7 +552,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) printk(KERN_CRIT "Can't alloc " "sync serial port 3 " "RX DMA channel"); - return -EBUSY; + goto out; } #endif RESET_DMA(4); WAIT_DMA(4); @@ -581,7 +585,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) &ports[0])) { printk(KERN_CRIT "Can't alloc " "sync serial manual irq"); - return -EBUSY; + goto out; } } else if (port == &ports[1]) { if (request_irq(8, @@ -591,7 +595,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) &ports[1])) { printk(KERN_CRIT "Can't alloc " "sync serial manual irq"); - return -EBUSY; + goto out; } } port->init_irqs = 0; @@ -620,7 +624,11 @@ static int sync_serial_open(struct inode *inode, struct file *file) *R_IRQ_MASK1_SET = 1 << port->data_avail_bit; DEBUG(printk(KERN_DEBUG "sser%d rec started\n", dev)); } - return 0; + ret = 0; + +out: + unlock_kernel(); + return ret; } static int sync_serial_release(struct inode *inode, struct file *file) diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c index de107dad9f4f..ef98608e5067 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c +++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -390,6 +391,8 @@ static int gpio_open(struct inode *inode, struct file *filp) if (!priv) return -ENOMEM; + + lock_kernel(); memset(priv, 0, sizeof(*priv)); priv->minor = p; @@ -412,6 +415,7 @@ static int gpio_open(struct inode *inode, struct file *filp) spin_unlock_irq(&gpio_lock); } + unlock_kernel(); return 0; } diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c index 7863fd4efc2b..fe1fde893887 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c +++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -426,9 +427,10 @@ gpio_open(struct inode *inode, struct file *filp) return -EINVAL; priv = kmalloc(sizeof(struct gpio_private), GFP_KERNEL); - if (!priv) return -ENOMEM; + + lock_kernel(); memset(priv, 0, sizeof(*priv)); priv->minor = p; @@ -449,6 +451,7 @@ gpio_open(struct inode *inode, struct file *filp) alarmlist = priv; spin_unlock_irq(&alarm_lock); + unlock_kernel(); return 0; } diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c index 47c377df6fb3..d2a0fbf5341f 100644 --- a/arch/cris/arch-v32/drivers/sync_serial.c +++ b/arch/cris/arch-v32/drivers/sync_serial.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -429,23 +430,26 @@ static inline int sync_data_avail_to_end(struct sync_port *port) static int sync_serial_open(struct inode *inode, struct file *file) { int dev = iminor(inode); + int ret = -EBUSY; sync_port *port; reg_dma_rw_cfg cfg = {.en = regk_dma_yes}; reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes}; + lock_kernel(); DEBUG(printk(KERN_DEBUG "Open sync serial port %d\n", dev)); if (dev < 0 || dev >= NBR_PORTS || !ports[dev].enabled) { DEBUG(printk(KERN_DEBUG "Invalid minor %d\n", dev)); - return -ENODEV; + ret = -ENODEV; + goto out; } port = &ports[dev]; /* Allow open this device twice (assuming one reader and one writer) */ if (port->busy == 2) { DEBUG(printk(KERN_DEBUG "Device is busy.. \n")); - return -EBUSY; + goto out; } @@ -459,7 +463,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) "synchronous serial 0 dma tr", &ports[0])) { printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ"); - return -EBUSY; + goto out; } else if (request_irq(DMA_IN_INTR_VECT, rx_interrupt, 0, @@ -467,7 +471,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) &ports[0])) { free_irq(DMA_OUT_INTR_VECT, &port[0]); printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ"); - return -EBUSY; + goto out; } else if (crisv32_request_dma(OUT_DMA_NBR, "synchronous serial 0 dma tr", DMA_VERBOSE_ON_ERROR, @@ -476,7 +480,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) free_irq(DMA_OUT_INTR_VECT, &port[0]); free_irq(DMA_IN_INTR_VECT, &port[0]); printk(KERN_CRIT "Can't allocate sync serial port 0 TX DMA channel"); - return -EBUSY; + goto out; } else if (crisv32_request_dma(IN_DMA_NBR, "synchronous serial 0 dma rec", DMA_VERBOSE_ON_ERROR, @@ -486,7 +490,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) free_irq(DMA_OUT_INTR_VECT, &port[0]); free_irq(DMA_IN_INTR_VECT, &port[0]); printk(KERN_CRIT "Can't allocate sync serial port 1 RX DMA channel"); - return -EBUSY; + goto out; } #endif } @@ -499,7 +503,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) "synchronous serial 1 dma tr", &ports[1])) { printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ"); - return -EBUSY; + goto out; } else if (request_irq(DMA7_INTR_VECT, rx_interrupt, 0, @@ -507,7 +511,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) &ports[1])) { free_irq(DMA6_INTR_VECT, &ports[1]); printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ"); - return -EBUSY; + goto out; } else if (crisv32_request_dma( SYNC_SER1_TX_DMA_NBR, "synchronous serial 1 dma tr", @@ -517,7 +521,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) free_irq(DMA6_INTR_VECT, &ports[1]); free_irq(DMA7_INTR_VECT, &ports[1]); printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel"); - return -EBUSY; + goto out; } else if (crisv32_request_dma( SYNC_SER1_RX_DMA_NBR, "synchronous serial 3 dma rec", @@ -528,7 +532,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) free_irq(DMA6_INTR_VECT, &ports[1]); free_irq(DMA7_INTR_VECT, &ports[1]); printk(KERN_CRIT "Can't allocate sync serial port 3 RX DMA channel"); - return -EBUSY; + goto out; } #endif } @@ -554,7 +558,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) "synchronous serial manual irq", &ports[0])) { printk("Can't allocate sync serial manual irq"); - return -EBUSY; + goto out; } } #ifdef CONFIG_ETRAXFS @@ -565,7 +569,7 @@ static int sync_serial_open(struct inode *inode, struct file *file) "synchronous serial manual irq", &ports[1])) { printk(KERN_CRIT "Can't allocate sync serial manual irq"); - return -EBUSY; + goto out; } } #endif @@ -578,7 +582,10 @@ static int sync_serial_open(struct inode *inode, struct file *file) } /* port->init_irqs */ port->busy++; - return 0; + ret = 0; +out: + unlock_kernel(); + return ret; } static int sync_serial_release(struct inode *inode, struct file *file) -- cgit v1.2.3 From 7558da942e51933b5e6aa5e851d4da1df0cd6752 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 15 May 2008 09:10:50 -0600 Subject: mips: cdev lock_kernel() pushdown Push the cdev lock_kernel() call into MIPS-specific drivers. Signed-off-by: Jonathan Corbet --- arch/mips/kernel/rtlx.c | 7 ++++++- arch/mips/kernel/vpe.c | 12 +++++++++--- arch/mips/sibyte/common/sb_tbprof.c | 25 ++++++++++++++++++------- 3 files changed, 33 insertions(+), 11 deletions(-) diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index b88f1c18ff4d..b55641961232 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -392,8 +393,12 @@ out: static int file_open(struct inode *inode, struct file *filp) { int minor = iminor(inode); + int err; - return rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1); + lock_kernel(); + err = rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1); + unlock_kernel(); + return err; } static int file_release(struct inode *inode, struct file *filp) diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 2794501ff302..972b2d2b8401 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include #include @@ -1050,17 +1051,20 @@ static int vpe_open(struct inode *inode, struct file *filp) enum vpe_state state; struct vpe_notifications *not; struct vpe *v; - int ret; + int ret, err = 0; + lock_kernel(); if (minor != iminor(inode)) { /* assume only 1 device at the moment. */ printk(KERN_WARNING "VPE loader: only vpe1 is supported\n"); - return -ENODEV; + err = -ENODEV; + goto out; } if ((v = get_vpe(tclimit)) == NULL) { printk(KERN_WARNING "VPE loader: unable to get vpe\n"); - return -ENODEV; + err = -ENODEV; + goto out; } state = xchg(&v->state, VPE_STATE_INUSE); @@ -1100,6 +1104,8 @@ static int vpe_open(struct inode *inode, struct file *filp) v->shared_ptr = NULL; v->__start = 0; +out: + unlock_kernel(); return 0; } diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c index 63b444eaf01e..28b012ab8dcb 100644 --- a/arch/mips/sibyte/common/sb_tbprof.c +++ b/arch/mips/sibyte/common/sb_tbprof.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -402,18 +403,26 @@ static int sbprof_zbprof_stop(void) static int sbprof_tb_open(struct inode *inode, struct file *filp) { int minor; + int err = 0; + lock_kernel(); minor = iminor(inode); - if (minor != 0) - return -ENODEV; + if (minor != 0) { + err = -ENODEV; + goto out; + } - if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) - return -EBUSY; + if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) { + err = -EBUSY; + goto out; + } memset(&sbp, 0, sizeof(struct sbprof_tb)); sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES); - if (!sbp.sbprof_tbbuf) - return -ENOMEM; + if (!sbp.sbprof_tbbuf) { + err = -ENOMEM; + goto out; + } memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES); init_waitqueue_head(&sbp.tb_sync); init_waitqueue_head(&sbp.tb_read); @@ -421,7 +430,9 @@ static int sbprof_tb_open(struct inode *inode, struct file *filp) sbp.open = SB_OPEN; - return 0; + out: + unlock_kernel(); + return err; } static int sbprof_tb_release(struct inode *inode, struct file *filp) -- cgit v1.2.3 From 1fa984b583a809423ddb1d88fa46484071f85f80 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 15 May 2008 09:11:26 -0600 Subject: sh: cdev lock_kernel() pushdown Push the cdev lock_kernel() call down into the sh gio driver. Signed-off-by: Jonathan Corbet --- arch/sh/boards/landisk/gio.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c index 17025080db35..0c15b0a50b99 100644 --- a/arch/sh/boards/landisk/gio.c +++ b/arch/sh/boards/landisk/gio.c @@ -14,6 +14,7 @@ */ #include #include +#include #include #include #include @@ -32,17 +33,20 @@ static int openCnt; static int gio_open(struct inode *inode, struct file *filp) { int minor; + int ret = -ENOENT; + lock_kernel(); minor = MINOR(inode->i_rdev); if (minor < DEVCOUNT) { if (openCnt > 0) { - return -EALREADY; + ret = -EALREADY; } else { openCnt++; - return 0; + ret = 0; } } - return -ENOENT; + unlock_kernel(); + return ret; } static int gio_close(struct inode *inode, struct file *filp) -- cgit v1.2.3 From 5119e92efc733d730b34f9605a5ae61fdc4bf649 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 15 May 2008 09:12:01 -0600 Subject: x86: cdev lock_kernel() pushdown Push the cdev lock_kernel() call down into the x86 msr and cpuid drivers. Signed-off-by: Jonathan Corbet --- arch/x86/kernel/cpuid.c | 25 +++++++++++++++++-------- arch/x86/kernel/msr.c | 16 ++++++++++++---- 2 files changed, 29 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index daff52a62248..71f1c2654bec 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -107,15 +108,23 @@ static ssize_t cpuid_read(struct file *file, char __user *buf, static int cpuid_open(struct inode *inode, struct file *file) { - unsigned int cpu = iminor(file->f_path.dentry->d_inode); - struct cpuinfo_x86 *c = &cpu_data(cpu); - - if (cpu >= NR_CPUS || !cpu_online(cpu)) - return -ENXIO; /* No such CPU */ + unsigned int cpu; + struct cpuinfo_x86 *c; + int ret = 0; + + lock_kernel(); + + cpu = iminor(file->f_path.dentry->d_inode); + if (cpu >= NR_CPUS || !cpu_online(cpu)) { + ret = -ENXIO; /* No such CPU */ + goto out; + } + c = &cpu_data(cpu); if (c->cpuid_level < 0) - return -EIO; /* CPUID not supported */ - - return 0; + ret = -EIO; /* CPUID not supported */ +out: + unlock_kernel(); + return ret; } /* diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 1f3abe048e93..a153b3905f60 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -117,12 +117,20 @@ static int msr_open(struct inode *inode, struct file *file) { unsigned int cpu = iminor(file->f_path.dentry->d_inode); struct cpuinfo_x86 *c = &cpu_data(cpu); + int ret = 0; - if (cpu >= NR_CPUS || !cpu_online(cpu)) - return -ENXIO; /* No such CPU */ - if (!cpu_has(c, X86_FEATURE_MSR)) - return -EIO; /* MSR not supported */ + lock_kernel(); + cpu = iminor(file->f_path.dentry->d_inode); + if (cpu >= NR_CPUS || !cpu_online(cpu)) { + ret = -ENXIO; /* No such CPU */ + goto out; + } + c = &cpu_data(cpu); + if (!cpu_has(c, X86_FEATURE_MSR)) + ret = -EIO; /* MSR not supported */ +out: + unlock_kernel(); return 0; } -- cgit v1.2.3 From 3db633ee352bfe20d4a2b0c3c8a46ce31a6c7149 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 15 May 2008 09:21:02 -0600 Subject: i2c: cdev lock_kernel() pushdown Signed-off-by: Jonathan Corbet --- drivers/i2c/i2c-dev.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index d34c14c81c29..006a5857256a 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -34,6 +34,7 @@ #include #include #include +#include #include static struct i2c_driver i2cdev_driver; @@ -441,14 +442,20 @@ static int i2cdev_open(struct inode *inode, struct file *file) struct i2c_client *client; struct i2c_adapter *adap; struct i2c_dev *i2c_dev; + int ret = 0; + lock_kernel(); i2c_dev = i2c_dev_get_by_minor(minor); - if (!i2c_dev) - return -ENODEV; + if (!i2c_dev) { + ret = -ENODEV; + goto out; + } adap = i2c_get_adapter(i2c_dev->adap->nr); - if (!adap) - return -ENODEV; + if (!adap) { + ret = -ENODEV; + goto out; + } /* This creates an anonymous i2c_client, which may later be * pointed to some address using I2C_SLAVE or I2C_SLAVE_FORCE. @@ -460,7 +467,8 @@ static int i2cdev_open(struct inode *inode, struct file *file) client = kzalloc(sizeof(*client), GFP_KERNEL); if (!client) { i2c_put_adapter(adap); - return -ENOMEM; + ret = -ENOMEM; + goto out; } snprintf(client->name, I2C_NAME_SIZE, "i2c-dev %d", adap->nr); client->driver = &i2cdev_driver; @@ -468,7 +476,9 @@ static int i2cdev_open(struct inode *inode, struct file *file) client->adapter = adap; file->private_data = client; - return 0; +out: + unlock_kernel(); + return ret; } static int i2cdev_release(struct inode *inode, struct file *file) -- cgit v1.2.3 From 0911810755fc9f15659cc3cb43912633b90027a0 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 15 May 2008 09:21:33 -0600 Subject: cosa: cdev lock_kernel() pushdown Signed-off-by: Jonathan Corbet --- drivers/net/wan/cosa.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index b0fce1387eaf..5827324e9d9f 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -92,6 +92,7 @@ #include #include #include +#include #undef COSA_SLOW_IO /* for testing purposes only */ @@ -970,15 +971,21 @@ static int cosa_open(struct inode *inode, struct file *file) struct channel_data *chan; unsigned long flags; int n; + int ret = 0; + lock_kernel(); if ((n=iminor(file->f_path.dentry->d_inode)>>CARD_MINOR_BITS) - >= nr_cards) - return -ENODEV; + >= nr_cards) { + ret = -ENODEV; + goto out; + } cosa = cosa_cards+n; if ((n=iminor(file->f_path.dentry->d_inode) - & ((1<= cosa->nchannels) - return -ENODEV; + & ((1<= cosa->nchannels) { + ret = -ENODEV; + goto out; + } chan = cosa->chan + n; file->private_data = chan; @@ -987,7 +994,8 @@ static int cosa_open(struct inode *inode, struct file *file) if (chan->usage < 0) { /* in netdev mode */ spin_unlock_irqrestore(&cosa->lock, flags); - return -EBUSY; + ret = -EBUSY; + goto out; } cosa->usage++; chan->usage++; @@ -996,7 +1004,9 @@ static int cosa_open(struct inode *inode, struct file *file) chan->setup_rx = chrdev_setup_rx; chan->rx_done = chrdev_rx_done; spin_unlock_irqrestore(&cosa->lock, flags); - return 0; +out: + unlock_kernel(); + return ret; } static int cosa_release(struct inode *inode, struct file *file) -- cgit v1.2.3 From 0bec0bba7a507bdaf07312fcabdc00b5576abb32 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Thu, 15 May 2008 09:25:03 -0600 Subject: pcmcia: cdev lock_kernel() pushdown Signed-off-by: Jonathan Corbet --- drivers/pcmcia/pcmcia_ioctl.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c index 5f186abca108..138396ef5be9 100644 --- a/drivers/pcmcia/pcmcia_ioctl.c +++ b/drivers/pcmcia/pcmcia_ioctl.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #define IN_CARD_SERVICES @@ -397,20 +398,27 @@ static int ds_open(struct inode *inode, struct file *file) struct pcmcia_socket *s; user_info_t *user; static int warning_printed = 0; + int ret = 0; ds_dbg(0, "ds_open(socket %d)\n", i); + lock_kernel(); s = pcmcia_get_socket_by_nr(i); - if (!s) - return -ENODEV; + if (!s) { + ret = -ENODEV; + goto out; + } s = pcmcia_get_socket(s); - if (!s) - return -ENODEV; + if (!s) { + ret = -ENODEV; + goto out; + } if ((file->f_flags & O_ACCMODE) != O_RDONLY) { if (s->pcmcia_state.busy) { pcmcia_put_socket(s); - return -EBUSY; + ret = -EBUSY; + goto out; } else s->pcmcia_state.busy = 1; @@ -419,7 +427,8 @@ static int ds_open(struct inode *inode, struct file *file) user = kmalloc(sizeof(user_info_t), GFP_KERNEL); if (!user) { pcmcia_put_socket(s); - return -ENOMEM; + ret = -ENOMEM; + goto out; } user->event_tail = user->event_head = 0; user->next = s->user; @@ -441,7 +450,9 @@ static int ds_open(struct inode *inode, struct file *file) if (s->pcmcia_state.present) queue_event(user, CS_EVENT_CARD_INSERTION); - return 0; +out: + unlock_kernel(); + return ret; } /* ds_open */ /*====================================================================*/ -- cgit v1.2.3 From 8b09dee67f484e9b42114b1a1f068e080fd7aa56 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:21:05 +0200 Subject: rcupreempt: remove duplicate prototypes rcu_batches_completed and rcu_patches_completed_bh are both declared in rcuclassic.h and rcupreempt.h. This patch removes the extra prototypes for them from rcupdate.h. rcu_batches_completed_bh is defined as a static inline in the rcupreempt.h header file. Trying to export this as EXPORT_SYMBOL_GPL causes linking problems with the powerpc linker. There's no need to export a static inlined function. Modules must be compiled with the same type of RCU implementation as the kernel they are for. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- include/linux/rcupdate.h | 2 -- kernel/rcupreempt.c | 2 -- 2 files changed, 4 deletions(-) diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index d42dbec06083..ec2fc5b32646 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -224,8 +224,6 @@ extern void call_rcu_bh(struct rcu_head *head, /* Exported common interfaces */ extern void synchronize_rcu(void); extern void rcu_barrier(void); -extern long rcu_batches_completed(void); -extern long rcu_batches_completed_bh(void); /* Internal to kernel */ extern void rcu_init(void); diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index e1cdf196a515..5e02b7740702 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -217,8 +217,6 @@ long rcu_batches_completed(void) } EXPORT_SYMBOL_GPL(rcu_batches_completed); -EXPORT_SYMBOL_GPL(rcu_batches_completed_bh); - void __rcu_read_lock(void) { int idx; -- cgit v1.2.3 From 4446a36ff8c74ac3b32feb009b651048e129c6af Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 12 May 2008 21:21:05 +0200 Subject: rcu: add call_rcu_sched() Fourth cut of patch to provide the call_rcu_sched(). This is again to synchronize_sched() as call_rcu() is to synchronize_rcu(). Should be fine for experimental and -rt use, but not ready for inclusion. With some luck, I will be able to tell Andrew to come out of hiding on the next round. Passes multi-day rcutorture sessions with concurrent CPU hotplugging. Fixes since the first version include a bug that could result in indefinite blocking (spotted by Gautham Shenoy), better resiliency against CPU-hotplug operations, and other minor fixes. Fixes since the second version include reworking grace-period detection to avoid deadlocks that could happen when running concurrently with CPU hotplug, adding Mathieu's fix to avoid the softlockup messages, as well as Mathieu's fix to allow use earlier in boot. Fixes since the third version include a wrong-CPU bug spotted by Andrew, getting rid of the obsolete synchronize_kernel API that somehow snuck back in, merging spin_unlock() and local_irq_restore() in a few places, commenting the code that checks for quiescent states based on interrupting from user-mode execution or the idle loop, removing some inline attributes, and some code-style changes. Known/suspected shortcomings: o I still do not entirely trust the sleep/wakeup logic. Next step will be to use a private snapshot of the CPU online mask in rcu_sched_grace_period() -- if the CPU wasn't there at the start of the grace period, we don't need to hear from it. And the bit about accounting for changes in online CPUs inside of rcu_sched_grace_period() is ugly anyway. o It might be good for rcu_sched_grace_period() to invoke resched_cpu() when a given CPU wasn't responding quickly, but resched_cpu() is declared static... This patch also fixes a long-standing bug in the earlier preemptable-RCU implementation of synchronize_rcu() that could result in loss of concurrent external changes to a task's CPU affinity mask. I still cannot remember who reported this... Signed-off-by: Paul E. McKenney Signed-off-by: Mathieu Desnoyers Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/rcuclassic.h | 3 + include/linux/rcupdate.h | 22 +++ include/linux/rcupreempt.h | 42 ++++- init/main.c | 1 + kernel/rcupdate.c | 20 +-- kernel/rcupreempt.c | 414 ++++++++++++++++++++++++++++++++++++++++----- 6 files changed, 434 insertions(+), 68 deletions(-) diff --git a/include/linux/rcuclassic.h b/include/linux/rcuclassic.h index b3aa05baab8a..8c774905dcfe 100644 --- a/include/linux/rcuclassic.h +++ b/include/linux/rcuclassic.h @@ -151,7 +151,10 @@ extern struct lockdep_map rcu_lock_map; #define __synchronize_sched() synchronize_rcu() +#define call_rcu_sched(head, func) call_rcu(head, func) + extern void __rcu_init(void); +#define rcu_init_sched() do { } while (0) extern void rcu_check_callbacks(int cpu, int user); extern void rcu_restart_cpu(int cpu); diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index ec2fc5b32646..411969cb5243 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -40,6 +40,7 @@ #include #include #include +#include /** * struct rcu_head - callback structure for use with RCU @@ -168,6 +169,27 @@ struct rcu_head { (p) = (v); \ }) +/* Infrastructure to implement the synchronize_() primitives. */ + +struct rcu_synchronize { + struct rcu_head head; + struct completion completion; +}; + +extern void wakeme_after_rcu(struct rcu_head *head); + +#define synchronize_rcu_xxx(name, func) \ +void name(void) \ +{ \ + struct rcu_synchronize rcu; \ + \ + init_completion(&rcu.completion); \ + /* Will wake me after RCU finished. */ \ + func(&rcu.head, wakeme_after_rcu); \ + /* Wait for it. */ \ + wait_for_completion(&rcu.completion); \ +} + /** * synchronize_sched - block until all CPUs have exited any non-preemptive * kernel code sequences. diff --git a/include/linux/rcupreempt.h b/include/linux/rcupreempt.h index 8a05c7e20bc4..f04b64eca636 100644 --- a/include/linux/rcupreempt.h +++ b/include/linux/rcupreempt.h @@ -40,10 +40,39 @@ #include #include -#define rcu_qsctr_inc(cpu) +struct rcu_dyntick_sched { + int dynticks; + int dynticks_snap; + int sched_qs; + int sched_qs_snap; + int sched_dynticks_snap; +}; + +DECLARE_PER_CPU(struct rcu_dyntick_sched, rcu_dyntick_sched); + +static inline void rcu_qsctr_inc(int cpu) +{ + struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); + + rdssp->sched_qs++; +} #define rcu_bh_qsctr_inc(cpu) #define call_rcu_bh(head, rcu) call_rcu(head, rcu) +/** + * call_rcu_sched - Queue RCU callback for invocation after sched grace period. + * @head: structure to be used for queueing the RCU updates. + * @func: actual update function to be invoked after the grace period + * + * The update function will be invoked some time after a full + * synchronize_sched()-style grace period elapses, in other words after + * all currently executing preempt-disabled sections of code (including + * hardirq handlers, NMI handlers, and local_irq_save() blocks) have + * completed. + */ +extern void call_rcu_sched(struct rcu_head *head, + void (*func)(struct rcu_head *head)); + extern void __rcu_read_lock(void) __acquires(RCU); extern void __rcu_read_unlock(void) __releases(RCU); extern int rcu_pending(int cpu); @@ -55,6 +84,7 @@ extern int rcu_needs_cpu(int cpu); extern void __synchronize_sched(void); extern void __rcu_init(void); +extern void rcu_init_sched(void); extern void rcu_check_callbacks(int cpu, int user); extern void rcu_restart_cpu(int cpu); extern long rcu_batches_completed(void); @@ -81,20 +111,20 @@ extern struct rcupreempt_trace *rcupreempt_trace_cpu(int cpu); struct softirq_action; #ifdef CONFIG_NO_HZ -DECLARE_PER_CPU(long, dynticks_progress_counter); +DECLARE_PER_CPU(struct rcu_dyntick_sched, rcu_dyntick_sched); static inline void rcu_enter_nohz(void) { smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */ - __get_cpu_var(dynticks_progress_counter)++; - WARN_ON(__get_cpu_var(dynticks_progress_counter) & 0x1); + __get_cpu_var(rcu_dyntick_sched).dynticks++; + WARN_ON(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1); } static inline void rcu_exit_nohz(void) { - __get_cpu_var(dynticks_progress_counter)++; smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */ - WARN_ON(!(__get_cpu_var(dynticks_progress_counter) & 0x1)); + __get_cpu_var(rcu_dyntick_sched).dynticks++; + WARN_ON(!(__get_cpu_var(rcu_dyntick_sched).dynticks & 0x1)); } #else /* CONFIG_NO_HZ */ diff --git a/init/main.c b/init/main.c index f7fb20021d48..a9cc3e0803de 100644 --- a/init/main.c +++ b/init/main.c @@ -758,6 +758,7 @@ static void __init do_initcalls(void) */ static void __init do_basic_setup(void) { + rcu_init_sched(); /* needed by module_init stage. */ /* drivers will send hotplug events */ init_workqueues(); usermodehelper_init(); diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c index c09605f8d16c..a4e329d92883 100644 --- a/kernel/rcupdate.c +++ b/kernel/rcupdate.c @@ -39,18 +39,12 @@ #include #include #include -#include #include #include #include #include #include -struct rcu_synchronize { - struct rcu_head head; - struct completion completion; -}; - static DEFINE_PER_CPU(struct rcu_head, rcu_barrier_head) = {NULL}; static atomic_t rcu_barrier_cpu_count; static DEFINE_MUTEX(rcu_barrier_mutex); @@ -60,7 +54,7 @@ static struct completion rcu_barrier_completion; * Awaken the corresponding synchronize_rcu() instance now that a * grace period has elapsed. */ -static void wakeme_after_rcu(struct rcu_head *head) +void wakeme_after_rcu(struct rcu_head *head) { struct rcu_synchronize *rcu; @@ -77,17 +71,7 @@ static void wakeme_after_rcu(struct rcu_head *head) * sections are delimited by rcu_read_lock() and rcu_read_unlock(), * and may be nested. */ -void synchronize_rcu(void) -{ - struct rcu_synchronize rcu; - - init_completion(&rcu.completion); - /* Will wake me after RCU finished */ - call_rcu(&rcu.head, wakeme_after_rcu); - - /* Wait for it */ - wait_for_completion(&rcu.completion); -} +synchronize_rcu_xxx(synchronize_rcu, call_rcu) EXPORT_SYMBOL_GPL(synchronize_rcu); static void rcu_barrier_callback(struct rcu_head *notused) diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index 5e02b7740702..aaa7976bd85f 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include #include @@ -87,9 +88,14 @@ struct rcu_data { struct rcu_head **nexttail; struct rcu_head *waitlist[GP_STAGES]; struct rcu_head **waittail[GP_STAGES]; - struct rcu_head *donelist; + struct rcu_head *donelist; /* from waitlist & waitschedlist */ struct rcu_head **donetail; long rcu_flipctr[2]; + struct rcu_head *nextschedlist; + struct rcu_head **nextschedtail; + struct rcu_head *waitschedlist; + struct rcu_head **waitschedtail; + int rcu_sched_sleeping; #ifdef CONFIG_RCU_TRACE struct rcupreempt_trace trace; #endif /* #ifdef CONFIG_RCU_TRACE */ @@ -131,11 +137,24 @@ enum rcu_try_flip_states { rcu_try_flip_waitmb_state, }; +/* + * States for rcu_ctrlblk.rcu_sched_sleep. + */ + +enum rcu_sched_sleep_states { + rcu_sched_not_sleeping, /* Not sleeping, callbacks need GP. */ + rcu_sched_sleep_prep, /* Thinking of sleeping, rechecking. */ + rcu_sched_sleeping, /* Sleeping, awaken if GP needed. */ +}; + struct rcu_ctrlblk { spinlock_t fliplock; /* Protect state-machine transitions. */ long completed; /* Number of last completed batch. */ enum rcu_try_flip_states rcu_try_flip_state; /* The current state of the rcu state machine */ + spinlock_t schedlock; /* Protect rcu_sched sleep state. */ + enum rcu_sched_sleep_states sched_sleep; /* rcu_sched state. */ + wait_queue_head_t sched_wq; /* Place for rcu_sched to sleep. */ }; static DEFINE_PER_CPU(struct rcu_data, rcu_data); @@ -143,8 +162,12 @@ static struct rcu_ctrlblk rcu_ctrlblk = { .fliplock = __SPIN_LOCK_UNLOCKED(rcu_ctrlblk.fliplock), .completed = 0, .rcu_try_flip_state = rcu_try_flip_idle_state, + .schedlock = __SPIN_LOCK_UNLOCKED(rcu_ctrlblk.schedlock), + .sched_sleep = rcu_sched_not_sleeping, + .sched_wq = __WAIT_QUEUE_HEAD_INITIALIZER(rcu_ctrlblk.sched_wq), }; +static struct task_struct *rcu_sched_grace_period_task; #ifdef CONFIG_RCU_TRACE static char *rcu_try_flip_state_names[] = @@ -207,6 +230,8 @@ static DEFINE_PER_CPU_SHARED_ALIGNED(enum rcu_mb_flag_values, rcu_mb_flag) */ #define RCU_TRACE_RDP(f, rdp) RCU_TRACE(f, &((rdp)->trace)); +#define RCU_SCHED_BATCH_TIME (HZ / 50) + /* * Return the number of RCU batches processed thus far. Useful * for debug and statistics. @@ -411,32 +436,34 @@ static void __rcu_advance_callbacks(struct rcu_data *rdp) } } -#ifdef CONFIG_NO_HZ +DEFINE_PER_CPU_SHARED_ALIGNED(struct rcu_dyntick_sched, rcu_dyntick_sched) = { + .dynticks = 1, +}; -DEFINE_PER_CPU(long, dynticks_progress_counter) = 1; -static DEFINE_PER_CPU(long, rcu_dyntick_snapshot); +#ifdef CONFIG_NO_HZ static DEFINE_PER_CPU(int, rcu_update_flag); /** * rcu_irq_enter - Called from Hard irq handlers and NMI/SMI. * * If the CPU was idle with dynamic ticks active, this updates the - * dynticks_progress_counter to let the RCU handling know that the + * rcu_dyntick_sched.dynticks to let the RCU handling know that the * CPU is active. */ void rcu_irq_enter(void) { int cpu = smp_processor_id(); + struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); if (per_cpu(rcu_update_flag, cpu)) per_cpu(rcu_update_flag, cpu)++; /* * Only update if we are coming from a stopped ticks mode - * (dynticks_progress_counter is even). + * (rcu_dyntick_sched.dynticks is even). */ if (!in_interrupt() && - (per_cpu(dynticks_progress_counter, cpu) & 0x1) == 0) { + (rdssp->dynticks & 0x1) == 0) { /* * The following might seem like we could have a race * with NMI/SMIs. But this really isn't a problem. @@ -459,12 +486,12 @@ void rcu_irq_enter(void) * RCU read-side critical sections on this CPU would * have already completed. */ - per_cpu(dynticks_progress_counter, cpu)++; + rdssp->dynticks++; /* * The following memory barrier ensures that any * rcu_read_lock() primitives in the irq handler * are seen by other CPUs to follow the above - * increment to dynticks_progress_counter. This is + * increment to rcu_dyntick_sched.dynticks. This is * required in order for other CPUs to correctly * determine when it is safe to advance the RCU * grace-period state machine. @@ -472,7 +499,7 @@ void rcu_irq_enter(void) smp_mb(); /* see above block comment. */ /* * Since we can't determine the dynamic tick mode from - * the dynticks_progress_counter after this routine, + * the rcu_dyntick_sched.dynticks after this routine, * we use a second flag to acknowledge that we came * from an idle state with ticks stopped. */ @@ -480,7 +507,7 @@ void rcu_irq_enter(void) /* * If we take an NMI/SMI now, they will also increment * the rcu_update_flag, and will not update the - * dynticks_progress_counter on exit. That is for + * rcu_dyntick_sched.dynticks on exit. That is for * this IRQ to do. */ } @@ -490,12 +517,13 @@ void rcu_irq_enter(void) * rcu_irq_exit - Called from exiting Hard irq context. * * If the CPU was idle with dynamic ticks active, update the - * dynticks_progress_counter to put let the RCU handling be + * rcu_dyntick_sched.dynticks to put let the RCU handling be * aware that the CPU is going back to idle with no ticks. */ void rcu_irq_exit(void) { int cpu = smp_processor_id(); + struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); /* * rcu_update_flag is set if we interrupted the CPU @@ -503,7 +531,7 @@ void rcu_irq_exit(void) * Once this occurs, we keep track of interrupt nesting * because a NMI/SMI could also come in, and we still * only want the IRQ that started the increment of the - * dynticks_progress_counter to be the one that modifies + * rcu_dyntick_sched.dynticks to be the one that modifies * it on exit. */ if (per_cpu(rcu_update_flag, cpu)) { @@ -515,28 +543,29 @@ void rcu_irq_exit(void) /* * If an NMI/SMI happens now we are still - * protected by the dynticks_progress_counter being odd. + * protected by the rcu_dyntick_sched.dynticks being odd. */ /* * The following memory barrier ensures that any * rcu_read_unlock() primitives in the irq handler * are seen by other CPUs to preceed the following - * increment to dynticks_progress_counter. This + * increment to rcu_dyntick_sched.dynticks. This * is required in order for other CPUs to determine * when it is safe to advance the RCU grace-period * state machine. */ smp_mb(); /* see above block comment. */ - per_cpu(dynticks_progress_counter, cpu)++; - WARN_ON(per_cpu(dynticks_progress_counter, cpu) & 0x1); + rdssp->dynticks++; + WARN_ON(rdssp->dynticks & 0x1); } } static void dyntick_save_progress_counter(int cpu) { - per_cpu(rcu_dyntick_snapshot, cpu) = - per_cpu(dynticks_progress_counter, cpu); + struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); + + rdssp->dynticks_snap = rdssp->dynticks; } static inline int @@ -544,9 +573,10 @@ rcu_try_flip_waitack_needed(int cpu) { long curr; long snap; + struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); - curr = per_cpu(dynticks_progress_counter, cpu); - snap = per_cpu(rcu_dyntick_snapshot, cpu); + curr = rdssp->dynticks; + snap = rdssp->dynticks_snap; smp_mb(); /* force ordering with cpu entering/leaving dynticks. */ /* @@ -580,9 +610,10 @@ rcu_try_flip_waitmb_needed(int cpu) { long curr; long snap; + struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); - curr = per_cpu(dynticks_progress_counter, cpu); - snap = per_cpu(rcu_dyntick_snapshot, cpu); + curr = rdssp->dynticks; + snap = rdssp->dynticks_snap; smp_mb(); /* force ordering with cpu entering/leaving dynticks. */ /* @@ -609,14 +640,86 @@ rcu_try_flip_waitmb_needed(int cpu) return 1; } +static void dyntick_save_progress_counter_sched(int cpu) +{ + struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); + + rdssp->sched_dynticks_snap = rdssp->dynticks; +} + +static int rcu_qsctr_inc_needed_dyntick(int cpu) +{ + long curr; + long snap; + struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); + + curr = rdssp->dynticks; + snap = rdssp->sched_dynticks_snap; + smp_mb(); /* force ordering with cpu entering/leaving dynticks. */ + + /* + * If the CPU remained in dynticks mode for the entire time + * and didn't take any interrupts, NMIs, SMIs, or whatever, + * then it cannot be in the middle of an rcu_read_lock(), so + * the next rcu_read_lock() it executes must use the new value + * of the counter. Therefore, this CPU has been in a quiescent + * state the entire time, and we don't need to wait for it. + */ + + if ((curr == snap) && ((curr & 0x1) == 0)) + return 0; + + /* + * If the CPU passed through or entered a dynticks idle phase with + * no active irq handlers, then, as above, this CPU has already + * passed through a quiescent state. + */ + + if ((curr - snap) > 2 || (snap & 0x1) == 0) + return 0; + + /* We need this CPU to go through a quiescent state. */ + + return 1; +} + #else /* !CONFIG_NO_HZ */ -# define dyntick_save_progress_counter(cpu) do { } while (0) -# define rcu_try_flip_waitack_needed(cpu) (1) -# define rcu_try_flip_waitmb_needed(cpu) (1) +# define dyntick_save_progress_counter(cpu) do { } while (0) +# define rcu_try_flip_waitack_needed(cpu) (1) +# define rcu_try_flip_waitmb_needed(cpu) (1) + +# define dyntick_save_progress_counter_sched(cpu) do { } while (0) +# define rcu_qsctr_inc_needed_dyntick(cpu) (1) #endif /* CONFIG_NO_HZ */ +static void save_qsctr_sched(int cpu) +{ + struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); + + rdssp->sched_qs_snap = rdssp->sched_qs; +} + +static inline int rcu_qsctr_inc_needed(int cpu) +{ + struct rcu_dyntick_sched *rdssp = &per_cpu(rcu_dyntick_sched, cpu); + + /* + * If there has been a quiescent state, no more need to wait + * on this CPU. + */ + + if (rdssp->sched_qs != rdssp->sched_qs_snap) { + smp_mb(); /* force ordering with cpu entering schedule(). */ + return 0; + } + + /* We need this CPU to go through a quiescent state. */ + + return 1; +} + /* * Get here when RCU is idle. Decide whether we need to * move out of idle state, and return non-zero if so. @@ -819,6 +922,26 @@ void rcu_check_callbacks(int cpu, int user) unsigned long flags; struct rcu_data *rdp = RCU_DATA_CPU(cpu); + /* + * If this CPU took its interrupt from user mode or from the + * idle loop, and this is not a nested interrupt, then + * this CPU has to have exited all prior preept-disable + * sections of code. So increment the counter to note this. + * + * The memory barrier is needed to handle the case where + * writes from a preempt-disable section of code get reordered + * into schedule() by this CPU's write buffer. So the memory + * barrier makes sure that the rcu_qsctr_inc() is seen by other + * CPUs to happen after any such write. + */ + + if (user || + (idle_cpu(cpu) && !in_softirq() && + hardirq_count() <= (1 << HARDIRQ_SHIFT))) { + smp_mb(); /* Guard against aggressive schedule(). */ + rcu_qsctr_inc(cpu); + } + rcu_check_mb(cpu); if (rcu_ctrlblk.completed == rdp->completed) rcu_try_flip(); @@ -869,6 +992,8 @@ void rcu_offline_cpu(int cpu) struct rcu_head *list = NULL; unsigned long flags; struct rcu_data *rdp = RCU_DATA_CPU(cpu); + struct rcu_head *schedlist = NULL; + struct rcu_head **schedtail = &schedlist; struct rcu_head **tail = &list; /* @@ -882,6 +1007,11 @@ void rcu_offline_cpu(int cpu) rcu_offline_cpu_enqueue(rdp->waitlist[i], rdp->waittail[i], list, tail); rcu_offline_cpu_enqueue(rdp->nextlist, rdp->nexttail, list, tail); + rcu_offline_cpu_enqueue(rdp->waitschedlist, rdp->waitschedtail, + schedlist, schedtail); + rcu_offline_cpu_enqueue(rdp->nextschedlist, rdp->nextschedtail, + schedlist, schedtail); + rdp->rcu_sched_sleeping = 0; spin_unlock_irqrestore(&rdp->lock, flags); rdp->waitlistcount = 0; @@ -916,22 +1046,40 @@ void rcu_offline_cpu(int cpu) * fix. */ - local_irq_save(flags); + local_irq_save(flags); /* disable preempt till we know what lock. */ rdp = RCU_DATA_ME(); spin_lock(&rdp->lock); *rdp->nexttail = list; if (list) rdp->nexttail = tail; + *rdp->nextschedtail = schedlist; + if (schedlist) + rdp->nextschedtail = schedtail; spin_unlock_irqrestore(&rdp->lock, flags); } void __devinit rcu_online_cpu(int cpu) { unsigned long flags; + struct rcu_data *rdp; spin_lock_irqsave(&rcu_ctrlblk.fliplock, flags); cpu_set(cpu, rcu_cpu_online_map); spin_unlock_irqrestore(&rcu_ctrlblk.fliplock, flags); + + /* + * The rcu_sched grace-period processing might have bypassed + * this CPU, given that it was not in the rcu_cpu_online_map + * when the grace-period scan started. This means that the + * grace-period task might sleep. So make sure that if this + * should happen, the first callback posted to this CPU will + * wake up the grace-period task if need be. + */ + + rdp = RCU_DATA_CPU(cpu); + spin_lock_irqsave(&rdp->lock, flags); + rdp->rcu_sched_sleeping = 1; + spin_unlock_irqrestore(&rdp->lock, flags); } #else /* #ifdef CONFIG_HOTPLUG_CPU */ @@ -986,31 +1134,196 @@ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) *rdp->nexttail = head; rdp->nexttail = &head->next; RCU_TRACE_RDP(rcupreempt_trace_next_add, rdp); - spin_unlock(&rdp->lock); - local_irq_restore(flags); + spin_unlock_irqrestore(&rdp->lock, flags); } EXPORT_SYMBOL_GPL(call_rcu); +void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) +{ + unsigned long flags; + struct rcu_data *rdp; + int wake_gp = 0; + + head->func = func; + head->next = NULL; + local_irq_save(flags); + rdp = RCU_DATA_ME(); + spin_lock(&rdp->lock); + *rdp->nextschedtail = head; + rdp->nextschedtail = &head->next; + if (rdp->rcu_sched_sleeping) { + + /* Grace-period processing might be sleeping... */ + + rdp->rcu_sched_sleeping = 0; + wake_gp = 1; + } + spin_unlock_irqrestore(&rdp->lock, flags); + if (wake_gp) { + + /* Wake up grace-period processing, unless someone beat us. */ + + spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags); + if (rcu_ctrlblk.sched_sleep != rcu_sched_sleeping) + wake_gp = 0; + rcu_ctrlblk.sched_sleep = rcu_sched_not_sleeping; + spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags); + if (wake_gp) + wake_up_interruptible(&rcu_ctrlblk.sched_wq); + } +} +EXPORT_SYMBOL_GPL(call_rcu_sched); + /* * Wait until all currently running preempt_disable() code segments * (including hardware-irq-disable segments) complete. Note that * in -rt this does -not- necessarily result in all currently executing * interrupt -handlers- having completed. */ -void __synchronize_sched(void) +synchronize_rcu_xxx(__synchronize_sched, call_rcu_sched) +EXPORT_SYMBOL_GPL(__synchronize_sched); + +/* + * kthread function that manages call_rcu_sched grace periods. + */ +static int rcu_sched_grace_period(void *arg) { - cpumask_t oldmask; + int couldsleep; /* might sleep after current pass. */ + int couldsleepnext = 0; /* might sleep after next pass. */ int cpu; + unsigned long flags; + struct rcu_data *rdp; + int ret; - if (sched_getaffinity(0, &oldmask) < 0) - oldmask = cpu_possible_map; - for_each_online_cpu(cpu) { - sched_setaffinity(0, &cpumask_of_cpu(cpu)); - schedule(); - } - sched_setaffinity(0, &oldmask); + /* + * Each pass through the following loop handles one + * rcu_sched grace period cycle. + */ + do { + /* Save each CPU's current state. */ + + for_each_online_cpu(cpu) { + dyntick_save_progress_counter_sched(cpu); + save_qsctr_sched(cpu); + } + + /* + * Sleep for about an RCU grace-period's worth to + * allow better batching and to consume less CPU. + */ + schedule_timeout_interruptible(RCU_SCHED_BATCH_TIME); + + /* + * If there was nothing to do last time, prepare to + * sleep at the end of the current grace period cycle. + */ + couldsleep = couldsleepnext; + couldsleepnext = 1; + if (couldsleep) { + spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags); + rcu_ctrlblk.sched_sleep = rcu_sched_sleep_prep; + spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags); + } + + /* + * Wait on each CPU in turn to have either visited + * a quiescent state or been in dynticks-idle mode. + */ + for_each_online_cpu(cpu) { + while (rcu_qsctr_inc_needed(cpu) && + rcu_qsctr_inc_needed_dyntick(cpu)) { + /* resched_cpu(cpu); @@@ */ + schedule_timeout_interruptible(1); + } + } + + /* Advance callbacks for each CPU. */ + + for_each_online_cpu(cpu) { + + rdp = RCU_DATA_CPU(cpu); + spin_lock_irqsave(&rdp->lock, flags); + + /* + * We are running on this CPU irq-disabled, so no + * CPU can go offline until we re-enable irqs. + * The current CPU might have already gone + * offline (between the for_each_offline_cpu and + * the spin_lock_irqsave), but in that case all its + * callback lists will be empty, so no harm done. + * + * Advance the callbacks! We share normal RCU's + * donelist, since callbacks are invoked the + * same way in either case. + */ + if (rdp->waitschedlist != NULL) { + *rdp->donetail = rdp->waitschedlist; + rdp->donetail = rdp->waitschedtail; + + /* + * Next rcu_check_callbacks() will + * do the required raise_softirq(). + */ + } + if (rdp->nextschedlist != NULL) { + rdp->waitschedlist = rdp->nextschedlist; + rdp->waitschedtail = rdp->nextschedtail; + couldsleep = 0; + couldsleepnext = 0; + } else { + rdp->waitschedlist = NULL; + rdp->waitschedtail = &rdp->waitschedlist; + } + rdp->nextschedlist = NULL; + rdp->nextschedtail = &rdp->nextschedlist; + + /* Mark sleep intention. */ + + rdp->rcu_sched_sleeping = couldsleep; + + spin_unlock_irqrestore(&rdp->lock, flags); + } + + /* If we saw callbacks on the last scan, go deal with them. */ + + if (!couldsleep) + continue; + + /* Attempt to block... */ + + spin_lock_irqsave(&rcu_ctrlblk.schedlock, flags); + if (rcu_ctrlblk.sched_sleep != rcu_sched_sleep_prep) { + + /* + * Someone posted a callback after we scanned. + * Go take care of it. + */ + spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags); + couldsleepnext = 0; + continue; + } + + /* Block until the next person posts a callback. */ + + rcu_ctrlblk.sched_sleep = rcu_sched_sleeping; + spin_unlock_irqrestore(&rcu_ctrlblk.schedlock, flags); + ret = 0; + __wait_event_interruptible(rcu_ctrlblk.sched_wq, + rcu_ctrlblk.sched_sleep != rcu_sched_sleeping, + ret); + + /* + * Signals would prevent us from sleeping, and we cannot + * do much with them in any case. So flush them. + */ + if (ret) + flush_signals(current); + couldsleepnext = 0; + + } while (!kthread_should_stop()); + + return (0); } -EXPORT_SYMBOL_GPL(__synchronize_sched); /* * Check to see if any future RCU-related work will need to be done @@ -1027,7 +1340,9 @@ int rcu_needs_cpu(int cpu) return (rdp->donelist != NULL || !!rdp->waitlistcount || - rdp->nextlist != NULL); + rdp->nextlist != NULL || + rdp->nextschedlist != NULL || + rdp->waitschedlist != NULL); } int rcu_pending(int cpu) @@ -1038,7 +1353,9 @@ int rcu_pending(int cpu) if (rdp->donelist != NULL || !!rdp->waitlistcount || - rdp->nextlist != NULL) + rdp->nextlist != NULL || + rdp->nextschedlist != NULL || + rdp->waitschedlist != NULL) return 1; /* The RCU core needs an acknowledgement from this CPU. */ @@ -1105,6 +1422,11 @@ void __init __rcu_init(void) rdp->donetail = &rdp->donelist; rdp->rcu_flipctr[0] = 0; rdp->rcu_flipctr[1] = 0; + rdp->nextschedlist = NULL; + rdp->nextschedtail = &rdp->nextschedlist; + rdp->waitschedlist = NULL; + rdp->waitschedtail = &rdp->waitschedlist; + rdp->rcu_sched_sleeping = 0; } register_cpu_notifier(&rcu_nb); @@ -1127,11 +1449,15 @@ void __init __rcu_init(void) } /* - * Deprecated, use synchronize_rcu() or synchronize_sched() instead. + * Late-boot-time RCU initialization that must wait until after scheduler + * has been initialized. */ -void synchronize_kernel(void) +void __init rcu_init_sched(void) { - synchronize_rcu(); + rcu_sched_grace_period_task = kthread_run(rcu_sched_grace_period, + NULL, + "rcu_sched_grace_period"); + WARN_ON(IS_ERR(rcu_sched_grace_period_task)); } #ifdef CONFIG_RCU_TRACE -- cgit v1.2.3 From 8db559b83009bed92e1b5dd13a651ff273d9ff62 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 12 May 2008 21:21:05 +0200 Subject: rcu: add memory barriers and comments to rcu_check_callbacks() Add comments to the logic that infers quiescent states when interrupting from either user mode or the idle loop. Also add a memory barrier: it appears that James Huang was in fact onto something, as the scheduler is much less synchronization happy than it once was, so we can no longer rely on its memory barriers in all cases. Signed-off-by: Paul E. McKenney Reported-by: James Huang Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/rcuclassic.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c index f4ffbd0f306f..d8348792f9f5 100644 --- a/kernel/rcuclassic.c +++ b/kernel/rcuclassic.c @@ -502,10 +502,38 @@ void rcu_check_callbacks(int cpu, int user) if (user || (idle_cpu(cpu) && !in_softirq() && hardirq_count() <= (1 << HARDIRQ_SHIFT))) { + + /* + * Get here if this CPU took its interrupt from user + * mode or from the idle loop, and if this is not a + * nested interrupt. In this case, the CPU is in + * a quiescent state, so count it. + * + * Also do a memory barrier. This is needed to handle + * the case where writes from a preempt-disable section + * of code get reordered into schedule() by this CPU's + * write buffer. The memory barrier makes sure that + * the rcu_qsctr_inc() and rcu_bh_qsctr_inc() are see + * by other CPUs to happen after any such write. + */ + + smp_mb(); /* See above block comment. */ rcu_qsctr_inc(cpu); rcu_bh_qsctr_inc(cpu); - } else if (!in_softirq()) + + } else if (!in_softirq()) { + + /* + * Get here if this CPU did not take its interrupt from + * softirq, in other words, if it is not interrupting + * a rcu_bh read-side critical section. This is an _bh + * critical section, so count it. The memory barrier + * is needed for the same reason as is the above one. + */ + + smp_mb(); /* See above block comment. */ rcu_bh_qsctr_inc(cpu); + } raise_rcu_softirq(); } -- cgit v1.2.3 From 70f12f848d3e981479b4f6f751e73c14f7c13e5b Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 12 May 2008 21:21:05 +0200 Subject: rcu: add rcu_barrier_sched() and rcu_barrier_bh() Add rcu_barrier_sched() and rcu_barrier_bh(). With these in place, rcutorture no longer gives the occasional oops when repeatedly starting and stopping torturing rcu_bh. Also adds the API needed to flush out pre-existing call_rcu_sched() callbacks. Signed-off-by: Paul E. McKenney Signed-off-by: Mathieu Desnoyers Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/rcupdate.h | 2 ++ kernel/rcupdate.c | 55 ++++++++++++++++++++++++++++++++++++++++++------ 2 files changed, 51 insertions(+), 6 deletions(-) diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 411969cb5243..e8b4039cfb2f 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -246,6 +246,8 @@ extern void call_rcu_bh(struct rcu_head *head, /* Exported common interfaces */ extern void synchronize_rcu(void); extern void rcu_barrier(void); +extern void rcu_barrier_bh(void); +extern void rcu_barrier_sched(void); /* Internal to kernel */ extern void rcu_init(void); diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c index a4e329d92883..4a74b8d48d90 100644 --- a/kernel/rcupdate.c +++ b/kernel/rcupdate.c @@ -45,6 +45,12 @@ #include #include +enum rcu_barrier { + RCU_BARRIER_STD, + RCU_BARRIER_BH, + RCU_BARRIER_SCHED, +}; + static DEFINE_PER_CPU(struct rcu_head, rcu_barrier_head) = {NULL}; static atomic_t rcu_barrier_cpu_count; static DEFINE_MUTEX(rcu_barrier_mutex); @@ -83,19 +89,30 @@ static void rcu_barrier_callback(struct rcu_head *notused) /* * Called with preemption disabled, and from cross-cpu IRQ context. */ -static void rcu_barrier_func(void *notused) +static void rcu_barrier_func(void *type) { int cpu = smp_processor_id(); struct rcu_head *head = &per_cpu(rcu_barrier_head, cpu); atomic_inc(&rcu_barrier_cpu_count); - call_rcu(head, rcu_barrier_callback); + switch ((enum rcu_barrier)type) { + case RCU_BARRIER_STD: + call_rcu(head, rcu_barrier_callback); + break; + case RCU_BARRIER_BH: + call_rcu_bh(head, rcu_barrier_callback); + break; + case RCU_BARRIER_SCHED: + call_rcu_sched(head, rcu_barrier_callback); + break; + } } -/** - * rcu_barrier - Wait until all the in-flight RCUs are complete. +/* + * Orchestrate the specified type of RCU barrier, waiting for all + * RCU callbacks of the specified type to complete. */ -void rcu_barrier(void) +static void _rcu_barrier(enum rcu_barrier type) { BUG_ON(in_interrupt()); /* Take cpucontrol mutex to protect against CPU hotplug */ @@ -111,13 +128,39 @@ void rcu_barrier(void) * until all the callbacks are queued. */ rcu_read_lock(); - on_each_cpu(rcu_barrier_func, NULL, 0, 1); + on_each_cpu(rcu_barrier_func, (void *)type, 0, 1); rcu_read_unlock(); wait_for_completion(&rcu_barrier_completion); mutex_unlock(&rcu_barrier_mutex); } + +/** + * rcu_barrier - Wait until all in-flight call_rcu() callbacks complete. + */ +void rcu_barrier(void) +{ + _rcu_barrier(RCU_BARRIER_STD); +} EXPORT_SYMBOL_GPL(rcu_barrier); +/** + * rcu_barrier_bh - Wait until all in-flight call_rcu_bh() callbacks complete. + */ +void rcu_barrier_bh(void) +{ + _rcu_barrier(RCU_BARRIER_BH); +} +EXPORT_SYMBOL_GPL(rcu_barrier_bh); + +/** + * rcu_barrier_sched - Wait for in-flight call_rcu_sched() callbacks. + */ +void rcu_barrier_sched(void) +{ + _rcu_barrier(RCU_BARRIER_SCHED); +} +EXPORT_SYMBOL_GPL(rcu_barrier_sched); + void __init rcu_init(void) { __rcu_init(); -- cgit v1.2.3 From 2326974df29988181b6b69ed6fbf42b17adf916f Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 12 May 2008 21:21:05 +0200 Subject: rcu: add call_rcu_sched() and friends to rcutorture Add entry to rcu_torture_ops allowing the correct barrier function to be used upon exit from rcutorture. Also add torture options for the new call_rcu_sched() API. Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/rcutorture.c | 34 +++++++++++++++++++++++++++++++--- 1 file changed, 31 insertions(+), 3 deletions(-) diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c index 33acc424667e..0334b6a8baca 100644 --- a/kernel/rcutorture.c +++ b/kernel/rcutorture.c @@ -192,6 +192,7 @@ struct rcu_torture_ops { int (*completed)(void); void (*deferredfree)(struct rcu_torture *p); void (*sync)(void); + void (*cb_barrier)(void); int (*stats)(char *page); char *name; }; @@ -265,6 +266,7 @@ static struct rcu_torture_ops rcu_ops = { .completed = rcu_torture_completed, .deferredfree = rcu_torture_deferred_free, .sync = synchronize_rcu, + .cb_barrier = rcu_barrier, .stats = NULL, .name = "rcu" }; @@ -304,6 +306,7 @@ static struct rcu_torture_ops rcu_sync_ops = { .completed = rcu_torture_completed, .deferredfree = rcu_sync_torture_deferred_free, .sync = synchronize_rcu, + .cb_barrier = NULL, .stats = NULL, .name = "rcu_sync" }; @@ -364,6 +367,7 @@ static struct rcu_torture_ops rcu_bh_ops = { .completed = rcu_bh_torture_completed, .deferredfree = rcu_bh_torture_deferred_free, .sync = rcu_bh_torture_synchronize, + .cb_barrier = rcu_barrier_bh, .stats = NULL, .name = "rcu_bh" }; @@ -377,6 +381,7 @@ static struct rcu_torture_ops rcu_bh_sync_ops = { .completed = rcu_bh_torture_completed, .deferredfree = rcu_sync_torture_deferred_free, .sync = rcu_bh_torture_synchronize, + .cb_barrier = NULL, .stats = NULL, .name = "rcu_bh_sync" }; @@ -458,6 +463,7 @@ static struct rcu_torture_ops srcu_ops = { .completed = srcu_torture_completed, .deferredfree = rcu_sync_torture_deferred_free, .sync = srcu_torture_synchronize, + .cb_barrier = NULL, .stats = srcu_torture_stats, .name = "srcu" }; @@ -482,6 +488,11 @@ static int sched_torture_completed(void) return 0; } +static void rcu_sched_torture_deferred_free(struct rcu_torture *p) +{ + call_rcu_sched(&p->rtort_rcu, rcu_torture_cb); +} + static void sched_torture_synchronize(void) { synchronize_sched(); @@ -494,12 +505,27 @@ static struct rcu_torture_ops sched_ops = { .readdelay = rcu_read_delay, /* just reuse rcu's version. */ .readunlock = sched_torture_read_unlock, .completed = sched_torture_completed, - .deferredfree = rcu_sync_torture_deferred_free, + .deferredfree = rcu_sched_torture_deferred_free, .sync = sched_torture_synchronize, + .cb_barrier = rcu_barrier_sched, .stats = NULL, .name = "sched" }; +static struct rcu_torture_ops sched_ops_sync = { + .init = rcu_sync_torture_init, + .cleanup = NULL, + .readlock = sched_torture_read_lock, + .readdelay = rcu_read_delay, /* just reuse rcu's version. */ + .readunlock = sched_torture_read_unlock, + .completed = sched_torture_completed, + .deferredfree = rcu_sync_torture_deferred_free, + .sync = sched_torture_synchronize, + .cb_barrier = NULL, + .stats = NULL, + .name = "sched_sync" +}; + /* * RCU torture writer kthread. Repeatedly substitutes a new structure * for that pointed to by rcu_torture_current, freeing the old structure @@ -848,7 +874,9 @@ rcu_torture_cleanup(void) stats_task = NULL; /* Wait for all RCU callbacks to fire. */ - rcu_barrier(); + + if (cur_ops->cb_barrier != NULL) + cur_ops->cb_barrier(); rcu_torture_stats_print(); /* -After- the stats thread is stopped! */ @@ -868,7 +896,7 @@ rcu_torture_init(void) int firsterr = 0; static struct rcu_torture_ops *torture_ops[] = { &rcu_ops, &rcu_sync_ops, &rcu_bh_ops, &rcu_bh_sync_ops, - &srcu_ops, &sched_ops, }; + &srcu_ops, &sched_ops, &sched_ops_sync, }; /* Process args and tell the world that the torturer is on the job. */ for (i = 0; i < ARRAY_SIZE(torture_ops); i++) { -- cgit v1.2.3 From 32300751b4079cb5688453baa94711579d4285d5 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 12 May 2008 21:21:05 +0200 Subject: sched: 1Q08 RCU doc update, add call_rcu_sched() Long-delayed update to the RCU documentation, including adding the new call_rcu_sched() and rcu_barrier_sched() APIs. Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- Documentation/RCU/NMI-RCU.txt | 3 ++ Documentation/RCU/RTFP.txt | 108 ++++++++++++++++++++++++++++++++++++++++ Documentation/RCU/checklist.txt | 89 ++++++++++++++++++++++----------- Documentation/RCU/whatisRCU.txt | 58 ++++++++++++++------- 4 files changed, 210 insertions(+), 48 deletions(-) diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.txt index c64158ecde43..a6d32e65d222 100644 --- a/Documentation/RCU/NMI-RCU.txt +++ b/Documentation/RCU/NMI-RCU.txt @@ -93,6 +93,9 @@ Since NMI handlers disable preemption, synchronize_sched() is guaranteed not to return until all ongoing NMI handlers exit. It is therefore safe to free up the handler's data as soon as synchronize_sched() returns. +Important note: for this to work, the architecture in question must +invoke irq_enter() and irq_exit() on NMI entry and exit, respectively. + Answer to Quick Quiz diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt index 39ad8f56783a..9f711d2df91b 100644 --- a/Documentation/RCU/RTFP.txt +++ b/Documentation/RCU/RTFP.txt @@ -52,6 +52,10 @@ of each iteration. Unfortunately, chaotic relaxation requires highly structured data, such as the matrices used in scientific programs, and is thus inapplicable to most data structures in operating-system kernels. +In 1992, Henry (now Alexia) Massalin completed a dissertation advising +parallel programmers to defer processing when feasible to simplify +synchronization. RCU makes extremely heavy use of this advice. + In 1993, Jacobson [Jacobson93] verbally described what is perhaps the simplest deferred-free technique: simply waiting a fixed amount of time before freeing blocks awaiting deferred free. Jacobson did not describe @@ -138,6 +142,13 @@ blocking in read-side critical sections appeared [PaulEMcKenney2006c], Robert Olsson described an RCU-protected trie-hash combination [RobertOlsson2006a]. +2007 saw the journal version of the award-winning RCU paper from 2006 +[ThomasEHart2007a], as well as a paper demonstrating use of Promela +and Spin to mechanically verify an optimization to Oleg Nesterov's +QRCU [PaulEMcKenney2007QRCUspin], a design document describing +preemptible RCU [PaulEMcKenney2007PreemptibleRCU], and the three-part +LWN "What is RCU?" series [PaulEMcKenney2007WhatIsRCUFundamentally, +PaulEMcKenney2008WhatIsRCUUsage, and PaulEMcKenney2008WhatIsRCUAPI]. Bibtex Entries @@ -202,6 +213,20 @@ Bibtex Entries ,Year="1991" } +@phdthesis{HMassalinPhD +,author="H. Massalin" +,title="Synthesis: An Efficient Implementation of Fundamental Operating +System Services" +,school="Columbia University" +,address="New York, NY" +,year="1992" +,annotation=" + Mondo optimizing compiler. + Wait-free stuff. + Good advice: defer work to avoid synchronization. +" +} + @unpublished{Jacobson93 ,author="Van Jacobson" ,title="Avoid Read-Side Locking Via Delayed Free" @@ -635,3 +660,86 @@ Revised: " } +@unpublished{PaulEMcKenney2007PreemptibleRCU +,Author="Paul E. McKenney" +,Title="The design of preemptible read-copy-update" +,month="October" +,day="8" +,year="2007" +,note="Available: +\url{http://lwn.net/Articles/253651/} +[Viewed October 25, 2007]" +,annotation=" + LWN article describing the design of preemptible RCU. +" +} + +######################################################################## +# +# "What is RCU?" LWN series. +# + +@unpublished{PaulEMcKenney2007WhatIsRCUFundamentally +,Author="Paul E. McKenney and Jonathan Walpole" +,Title="What is {RCU}, Fundamentally?" +,month="December" +,day="17" +,year="2007" +,note="Available: +\url{http://lwn.net/Articles/262464/} +[Viewed December 27, 2007]" +,annotation=" + Lays out the three basic components of RCU: (1) publish-subscribe, + (2) wait for pre-existing readers to complete, and (2) maintain + multiple versions. +" +} + +@unpublished{PaulEMcKenney2008WhatIsRCUUsage +,Author="Paul E. McKenney" +,Title="What is {RCU}? Part 2: Usage" +,month="January" +,day="4" +,year="2008" +,note="Available: +\url{http://lwn.net/Articles/263130/} +[Viewed January 4, 2008]" +,annotation=" + Lays out six uses of RCU: + 1. RCU is a Reader-Writer Lock Replacement + 2. RCU is a Restricted Reference-Counting Mechanism + 3. RCU is a Bulk Reference-Counting Mechanism + 4. RCU is a Poor Man's Garbage Collector + 5. RCU is a Way of Providing Existence Guarantees + 6. RCU is a Way of Waiting for Things to Finish +" +} + +@unpublished{PaulEMcKenney2008WhatIsRCUAPI +,Author="Paul E. McKenney" +,Title="{RCU} part 3: the {RCU} {API}" +,month="January" +,day="17" +,year="2008" +,note="Available: +\url{http://lwn.net/Articles/264090/} +[Viewed January 10, 2008]" +,annotation=" + Gives an overview of the Linux-kernel RCU API and a brief annotated RCU + bibliography. +" +} + +@article{DinakarGuniguntala2008IBMSysJ +,author="D. Guniguntala and P. E. McKenney and J. Triplett and J. Walpole" +,title="The read-copy-update mechanism for supporting real-time applications on shared-memory multiprocessor systems with {Linux}" +,Year="2008" +,Month="April" +,journal="IBM Systems Journal" +,volume="47" +,number="2" +,pages="@@-@@" +,annotation=" + RCU, realtime RCU, sleepable RCU, performance. +" +} diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index 42b01bc2e1b4..cf5562cbe356 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -13,10 +13,13 @@ over a rather long period of time, but improvements are always welcome! detailed performance measurements show that RCU is nonetheless the right tool for the job. - The other exception would be where performance is not an issue, - and RCU provides a simpler implementation. An example of this - situation is the dynamic NMI code in the Linux 2.6 kernel, - at least on architectures where NMIs are rare. + Another exception is where performance is not an issue, and RCU + provides a simpler implementation. An example of this situation + is the dynamic NMI code in the Linux 2.6 kernel, at least on + architectures where NMIs are rare. + + Yet another exception is where the low real-time latency of RCU's + read-side primitives is critically important. 1. Does the update code have proper mutual exclusion? @@ -39,9 +42,10 @@ over a rather long period of time, but improvements are always welcome! 2. Do the RCU read-side critical sections make proper use of rcu_read_lock() and friends? These primitives are needed - to suppress preemption (or bottom halves, in the case of - rcu_read_lock_bh()) in the read-side critical sections, - and are also an excellent aid to readability. + to prevent grace periods from ending prematurely, which + could result in data being unceremoniously freed out from + under your read-side code, which can greatly increase the + actuarial risk of your kernel. As a rough rule of thumb, any dereference of an RCU-protected pointer must be covered by rcu_read_lock() or rcu_read_lock_bh() @@ -54,15 +58,30 @@ over a rather long period of time, but improvements are always welcome! be running while updates are in progress. There are a number of ways to handle this concurrency, depending on the situation: - a. Make updates appear atomic to readers. For example, + a. Use the RCU variants of the list and hlist update + primitives to add, remove, and replace elements on an + RCU-protected list. Alternatively, use the RCU-protected + trees that have been added to the Linux kernel. + + This is almost always the best approach. + + b. Proceed as in (a) above, but also maintain per-element + locks (that are acquired by both readers and writers) + that guard per-element state. Of course, fields that + the readers refrain from accessing can be guarded by the + update-side lock. + + This works quite well, also. + + c. Make updates appear atomic to readers. For example, pointer updates to properly aligned fields will appear atomic, as will individual atomic primitives. Operations performed under a lock and sequences of multiple atomic primitives will -not- appear to be atomic. - This is almost always the best approach. + This can work, but is starting to get a bit tricky. - b. Carefully order the updates and the reads so that + d. Carefully order the updates and the reads so that readers see valid data at all phases of the update. This is often more difficult than it sounds, especially given modern CPUs' tendency to reorder memory references. @@ -123,18 +142,22 @@ over a rather long period of time, but improvements are always welcome! when publicizing a pointer to a structure that can be traversed by an RCU read-side critical section. -5. If call_rcu(), or a related primitive such as call_rcu_bh(), - is used, the callback function must be written to be called - from softirq context. In particular, it cannot block. +5. If call_rcu(), or a related primitive such as call_rcu_bh() or + call_rcu_sched(), is used, the callback function must be + written to be called from softirq context. In particular, + it cannot block. 6. Since synchronize_rcu() can block, it cannot be called from - any sort of irq context. + any sort of irq context. Ditto for synchronize_sched() and + synchronize_srcu(). 7. If the updater uses call_rcu(), then the corresponding readers must use rcu_read_lock() and rcu_read_unlock(). If the updater uses call_rcu_bh(), then the corresponding readers must use - rcu_read_lock_bh() and rcu_read_unlock_bh(). Mixing things up - will result in confusion and broken kernels. + rcu_read_lock_bh() and rcu_read_unlock_bh(). If the updater + uses call_rcu_sched(), then the corresponding readers must + disable preemption. Mixing things up will result in confusion + and broken kernels. One exception to this rule: rcu_read_lock() and rcu_read_unlock() may be substituted for rcu_read_lock_bh() and rcu_read_unlock_bh() @@ -143,9 +166,9 @@ over a rather long period of time, but improvements are always welcome! such cases is a must, of course! And the jury is still out on whether the increased speed is worth it. -8. Although synchronize_rcu() is a bit slower than is call_rcu(), - it usually results in simpler code. So, unless update - performance is critically important or the updaters cannot block, +8. Although synchronize_rcu() is slower than is call_rcu(), it + usually results in simpler code. So, unless update performance + is critically important or the updaters cannot block, synchronize_rcu() should be used in preference to call_rcu(). An especially important property of the synchronize_rcu() @@ -187,23 +210,23 @@ over a rather long period of time, but improvements are always welcome! number of updates per grace period. 9. All RCU list-traversal primitives, which include - list_for_each_rcu(), list_for_each_entry_rcu(), + rcu_dereference(), list_for_each_rcu(), list_for_each_entry_rcu(), list_for_each_continue_rcu(), and list_for_each_safe_rcu(), - must be within an RCU read-side critical section. RCU + must be either within an RCU read-side critical section or + must be protected by appropriate update-side locks. RCU read-side critical sections are delimited by rcu_read_lock() and rcu_read_unlock(), or by similar primitives such as rcu_read_lock_bh() and rcu_read_unlock_bh(). - Use of the _rcu() list-traversal primitives outside of an - RCU read-side critical section causes no harm other than - a slight performance degradation on Alpha CPUs. It can - also be quite helpful in reducing code bloat when common - code is shared between readers and updaters. + The reason that it is permissible to use RCU list-traversal + primitives when the update-side lock is held is that doing so + can be quite helpful in reducing code bloat when common code is + shared between readers and updaters. 10. Conversely, if you are in an RCU read-side critical section, - you -must- use the "_rcu()" variants of the list macros. - Failing to do so will break Alpha and confuse people reading - your code. + and you don't hold the appropriate update-side lock, you -must- + use the "_rcu()" variants of the list macros. Failing to do so + will break Alpha and confuse people reading your code. 11. Note that synchronize_rcu() -only- guarantees to wait until all currently executing rcu_read_lock()-protected RCU read-side @@ -230,6 +253,14 @@ over a rather long period of time, but improvements are always welcome! must use whatever locking or other synchronization is required to safely access and/or modify that data structure. + RCU callbacks are -usually- executed on the same CPU that executed + the corresponding call_rcu(), call_rcu_bh(), or call_rcu_sched(), + but are by -no- means guaranteed to be. For example, if a given + CPU goes offline while having an RCU callback pending, then that + RCU callback will execute on some surviving CPU. (If this was + not the case, a self-spawning RCU callback would prevent the + victim CPU from ever going offline.) + 14. SRCU (srcu_read_lock(), srcu_read_unlock(), and synchronize_srcu()) may only be invoked from process context. Unlike other forms of RCU, it -is- permissible to block in an SRCU read-side critical diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index e0d6d99b8f9b..e04d643a9f57 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -1,3 +1,11 @@ +Please note that the "What is RCU?" LWN series is an excellent place +to start learning about RCU: + +1. What is RCU, Fundamentally? http://lwn.net/Articles/262464/ +2. What is RCU? Part 2: Usage http://lwn.net/Articles/263130/ +3. RCU part 3: the RCU API http://lwn.net/Articles/264090/ + + What is RCU? RCU is a synchronization mechanism that was added to the Linux kernel @@ -772,26 +780,18 @@ Linux-kernel source code, but it helps to have a full list of the APIs, since there does not appear to be a way to categorize them in docbook. Here is the list, by category. -Markers for RCU read-side critical sections: - - rcu_read_lock - rcu_read_unlock - rcu_read_lock_bh - rcu_read_unlock_bh - srcu_read_lock - srcu_read_unlock - RCU pointer/list traversal: rcu_dereference + list_for_each_entry_rcu + hlist_for_each_entry_rcu + list_for_each_rcu (to be deprecated in favor of list_for_each_entry_rcu) - list_for_each_entry_rcu list_for_each_continue_rcu (to be deprecated in favor of new list_for_each_entry_continue_rcu) - hlist_for_each_entry_rcu -RCU pointer update: +RCU pointer/list update: rcu_assign_pointer list_add_rcu @@ -799,16 +799,36 @@ RCU pointer update: list_del_rcu list_replace_rcu hlist_del_rcu + hlist_add_after_rcu + hlist_add_before_rcu hlist_add_head_rcu + hlist_replace_rcu + list_splice_init_rcu() -RCU grace period: +RCU: Critical sections Grace period Barrier + + rcu_read_lock synchronize_net rcu_barrier + rcu_read_unlock synchronize_rcu + call_rcu + + +bh: Critical sections Grace period Barrier + + rcu_read_lock_bh call_rcu_bh rcu_barrier_bh + rcu_read_unlock_bh + + +sched: Critical sections Grace period Barrier + + [preempt_disable] synchronize_sched rcu_barrier_sched + [and friends] call_rcu_sched + + +SRCU: Critical sections Grace period Barrier + + srcu_read_lock synchronize_srcu N/A + srcu_read_unlock - synchronize_net - synchronize_sched - synchronize_rcu - synchronize_srcu - call_rcu - call_rcu_bh See the comment headers in the source code (or the docbook generated from them) for more information. -- cgit v1.2.3 From 82524746c27fa418c250a56dd7606b9d3fc79826 Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Mon, 12 May 2008 21:21:05 +0200 Subject: rcu: split list.h and move rcu-protected lists into rculist.h Move rcu-protected lists from list.h into a new header file rculist.h. This is done because list are a very used primitive structure all over the kernel and it's currently impossible to include other header files in this list.h without creating some circular dependencies. For example, list.h implements rcu-protected list and uses rcu_dereference() without including rcupdate.h. It actually compiles because users of rcu_dereference() are macros. Others RCU functions could be used too but aren't probably because of this. Therefore this patch creates rculist.h which includes rcupdates without to many changes/troubles. Signed-off-by: Franck Bui-Huu Acked-by: Paul E. McKenney Acked-by: Josh Triplett Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- arch/ia64/sn/kernel/irq.c | 1 + crypto/async_tx/async_tx.c | 1 + drivers/infiniband/hw/ipath/ipath_verbs.c | 1 + drivers/infiniband/hw/ipath/ipath_verbs_mcast.c | 3 +- drivers/net/macvlan.c | 2 +- include/linux/dcache.h | 1 + include/linux/list.h | 367 ---------------------- include/linux/rculist.h | 396 ++++++++++++++++++++++++ kernel/pid.c | 1 + lib/textsearch.c | 1 + net/802/psnap.c | 1 + net/8021q/vlan.c | 1 + net/bridge/br_fdb.c | 1 + net/bridge/br_stp.c | 1 + net/netlabel/netlabel_domainhash.c | 3 +- 15 files changed, 409 insertions(+), 372 deletions(-) create mode 100644 include/linux/rculist.h diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 53351c3cd7b1..96c31b4180c3 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include diff --git a/crypto/async_tx/async_tx.c b/crypto/async_tx/async_tx.c index c6e772fc5ccd..095c798d3170 100644 --- a/crypto/async_tx/async_tx.c +++ b/crypto/async_tx/async_tx.c @@ -23,6 +23,7 @@ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * */ +#include #include #include diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c index e0ec540042bf..5d830d87ebca 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs.c @@ -35,6 +35,7 @@ #include #include #include +#include #include "ipath_kernel.h" #include "ipath_verbs.h" diff --git a/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c b/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c index 9e5abf9c309d..d73e32232879 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c @@ -31,8 +31,7 @@ * SOFTWARE. */ -#include -#include +#include #include "ipath_verbs.h" diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index c36a03ae9bfb..860d75d81f82 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -20,7 +20,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 2a6639407c80..1f5cebf10a23 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -3,6 +3,7 @@ #include #include +#include #include #include #include diff --git a/include/linux/list.h b/include/linux/list.h index 08cf4f651889..139ec41d9c2e 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -84,65 +84,6 @@ static inline void list_add_tail(struct list_head *new, struct list_head *head) __list_add(new, head->prev, head); } -/* - * Insert a new entry between two known consecutive entries. - * - * This is only for internal list manipulation where we know - * the prev/next entries already! - */ -static inline void __list_add_rcu(struct list_head * new, - struct list_head * prev, struct list_head * next) -{ - new->next = next; - new->prev = prev; - smp_wmb(); - next->prev = new; - prev->next = new; -} - -/** - * list_add_rcu - add a new entry to rcu-protected list - * @new: new entry to be added - * @head: list head to add it after - * - * Insert a new entry after the specified head. - * This is good for implementing stacks. - * - * The caller must take whatever precautions are necessary - * (such as holding appropriate locks) to avoid racing - * with another list-mutation primitive, such as list_add_rcu() - * or list_del_rcu(), running on this same list. - * However, it is perfectly legal to run concurrently with - * the _rcu list-traversal primitives, such as - * list_for_each_entry_rcu(). - */ -static inline void list_add_rcu(struct list_head *new, struct list_head *head) -{ - __list_add_rcu(new, head, head->next); -} - -/** - * list_add_tail_rcu - add a new entry to rcu-protected list - * @new: new entry to be added - * @head: list head to add it before - * - * Insert a new entry before the specified head. - * This is useful for implementing queues. - * - * The caller must take whatever precautions are necessary - * (such as holding appropriate locks) to avoid racing - * with another list-mutation primitive, such as list_add_tail_rcu() - * or list_del_rcu(), running on this same list. - * However, it is perfectly legal to run concurrently with - * the _rcu list-traversal primitives, such as - * list_for_each_entry_rcu(). - */ -static inline void list_add_tail_rcu(struct list_head *new, - struct list_head *head) -{ - __list_add_rcu(new, head->prev, head); -} - /* * Delete a list entry by making the prev/next entries * point to each other. @@ -173,36 +114,6 @@ static inline void list_del(struct list_head *entry) extern void list_del(struct list_head *entry); #endif -/** - * list_del_rcu - deletes entry from list without re-initialization - * @entry: the element to delete from the list. - * - * Note: list_empty() on entry does not return true after this, - * the entry is in an undefined state. It is useful for RCU based - * lockfree traversal. - * - * In particular, it means that we can not poison the forward - * pointers that may still be used for walking the list. - * - * The caller must take whatever precautions are necessary - * (such as holding appropriate locks) to avoid racing - * with another list-mutation primitive, such as list_del_rcu() - * or list_add_rcu(), running on this same list. - * However, it is perfectly legal to run concurrently with - * the _rcu list-traversal primitives, such as - * list_for_each_entry_rcu(). - * - * Note that the caller is not permitted to immediately free - * the newly deleted entry. Instead, either synchronize_rcu() - * or call_rcu() must be used to defer freeing until an RCU - * grace period has elapsed. - */ -static inline void list_del_rcu(struct list_head *entry) -{ - __list_del(entry->prev, entry->next); - entry->prev = LIST_POISON2; -} - /** * list_replace - replace old entry by new one * @old : the element to be replaced @@ -226,25 +137,6 @@ static inline void list_replace_init(struct list_head *old, INIT_LIST_HEAD(old); } -/** - * list_replace_rcu - replace old entry by new one - * @old : the element to be replaced - * @new : the new element to insert - * - * The @old entry will be replaced with the @new entry atomically. - * Note: @old should not be empty. - */ -static inline void list_replace_rcu(struct list_head *old, - struct list_head *new) -{ - new->next = old->next; - new->prev = old->prev; - smp_wmb(); - new->next->prev = new; - new->prev->next = new; - old->prev = LIST_POISON2; -} - /** * list_del_init - deletes entry from list and reinitialize it. * @entry: the element to delete from the list. @@ -368,62 +260,6 @@ static inline void list_splice_init(struct list_head *list, } } -/** - * list_splice_init_rcu - splice an RCU-protected list into an existing list. - * @list: the RCU-protected list to splice - * @head: the place in the list to splice the first list into - * @sync: function to sync: synchronize_rcu(), synchronize_sched(), ... - * - * @head can be RCU-read traversed concurrently with this function. - * - * Note that this function blocks. - * - * Important note: the caller must take whatever action is necessary to - * prevent any other updates to @head. In principle, it is possible - * to modify the list as soon as sync() begins execution. - * If this sort of thing becomes necessary, an alternative version - * based on call_rcu() could be created. But only if -really- - * needed -- there is no shortage of RCU API members. - */ -static inline void list_splice_init_rcu(struct list_head *list, - struct list_head *head, - void (*sync)(void)) -{ - struct list_head *first = list->next; - struct list_head *last = list->prev; - struct list_head *at = head->next; - - if (list_empty(head)) - return; - - /* "first" and "last" tracking list, so initialize it. */ - - INIT_LIST_HEAD(list); - - /* - * At this point, the list body still points to the source list. - * Wait for any readers to finish using the list before splicing - * the list body into the new list. Any new readers will see - * an empty list. - */ - - sync(); - - /* - * Readers are finished with the source list, so perform splice. - * The order is important if the new list is global and accessible - * to concurrent RCU readers. Note that RCU readers are not - * permitted to traverse the prev pointers without excluding - * this function. - */ - - last->next = at; - smp_wmb(); - head->next = first; - first->prev = head; - at->prev = last; -} - /** * list_entry - get the struct for this entry * @ptr: the &struct list_head pointer. @@ -629,57 +465,6 @@ static inline void list_splice_init_rcu(struct list_head *list, &pos->member != (head); \ pos = n, n = list_entry(n->member.prev, typeof(*n), member)) -/** - * list_for_each_rcu - iterate over an rcu-protected list - * @pos: the &struct list_head to use as a loop cursor. - * @head: the head for your list. - * - * This list-traversal primitive may safely run concurrently with - * the _rcu list-mutation primitives such as list_add_rcu() - * as long as the traversal is guarded by rcu_read_lock(). - */ -#define list_for_each_rcu(pos, head) \ - for (pos = rcu_dereference((head)->next); \ - prefetch(pos->next), pos != (head); \ - pos = rcu_dereference(pos->next)) - -#define __list_for_each_rcu(pos, head) \ - for (pos = rcu_dereference((head)->next); \ - pos != (head); \ - pos = rcu_dereference(pos->next)) - -/** - * list_for_each_entry_rcu - iterate over rcu list of given type - * @pos: the type * to use as a loop cursor. - * @head: the head for your list. - * @member: the name of the list_struct within the struct. - * - * This list-traversal primitive may safely run concurrently with - * the _rcu list-mutation primitives such as list_add_rcu() - * as long as the traversal is guarded by rcu_read_lock(). - */ -#define list_for_each_entry_rcu(pos, head, member) \ - for (pos = list_entry(rcu_dereference((head)->next), typeof(*pos), member); \ - prefetch(pos->member.next), &pos->member != (head); \ - pos = list_entry(rcu_dereference(pos->member.next), typeof(*pos), member)) - - -/** - * list_for_each_continue_rcu - * @pos: the &struct list_head to use as a loop cursor. - * @head: the head for your list. - * - * Iterate over an rcu-protected list, continuing after current point. - * - * This list-traversal primitive may safely run concurrently with - * the _rcu list-mutation primitives such as list_add_rcu() - * as long as the traversal is guarded by rcu_read_lock(). - */ -#define list_for_each_continue_rcu(pos, head) \ - for ((pos) = rcu_dereference((pos)->next); \ - prefetch((pos)->next), (pos) != (head); \ - (pos) = rcu_dereference((pos)->next)) - /* * Double linked lists with a single pointer list head. * Mostly useful for hash tables where the two pointer list head is @@ -730,31 +515,6 @@ static inline void hlist_del(struct hlist_node *n) n->pprev = LIST_POISON2; } -/** - * hlist_del_rcu - deletes entry from hash list without re-initialization - * @n: the element to delete from the hash list. - * - * Note: list_unhashed() on entry does not return true after this, - * the entry is in an undefined state. It is useful for RCU based - * lockfree traversal. - * - * In particular, it means that we can not poison the forward - * pointers that may still be used for walking the hash list. - * - * The caller must take whatever precautions are necessary - * (such as holding appropriate locks) to avoid racing - * with another list-mutation primitive, such as hlist_add_head_rcu() - * or hlist_del_rcu(), running on this same list. - * However, it is perfectly legal to run concurrently with - * the _rcu list-traversal primitives, such as - * hlist_for_each_entry(). - */ -static inline void hlist_del_rcu(struct hlist_node *n) -{ - __hlist_del(n); - n->pprev = LIST_POISON2; -} - static inline void hlist_del_init(struct hlist_node *n) { if (!hlist_unhashed(n)) { @@ -763,27 +523,6 @@ static inline void hlist_del_init(struct hlist_node *n) } } -/** - * hlist_replace_rcu - replace old entry by new one - * @old : the element to be replaced - * @new : the new element to insert - * - * The @old entry will be replaced with the @new entry atomically. - */ -static inline void hlist_replace_rcu(struct hlist_node *old, - struct hlist_node *new) -{ - struct hlist_node *next = old->next; - - new->next = next; - new->pprev = old->pprev; - smp_wmb(); - if (next) - new->next->pprev = &new->next; - *new->pprev = new; - old->pprev = LIST_POISON2; -} - static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h) { struct hlist_node *first = h->first; @@ -794,38 +533,6 @@ static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h) n->pprev = &h->first; } - -/** - * hlist_add_head_rcu - * @n: the element to add to the hash list. - * @h: the list to add to. - * - * Description: - * Adds the specified element to the specified hlist, - * while permitting racing traversals. - * - * The caller must take whatever precautions are necessary - * (such as holding appropriate locks) to avoid racing - * with another list-mutation primitive, such as hlist_add_head_rcu() - * or hlist_del_rcu(), running on this same list. - * However, it is perfectly legal to run concurrently with - * the _rcu list-traversal primitives, such as - * hlist_for_each_entry_rcu(), used to prevent memory-consistency - * problems on Alpha CPUs. Regardless of the type of CPU, the - * list-traversal primitive must be guarded by rcu_read_lock(). - */ -static inline void hlist_add_head_rcu(struct hlist_node *n, - struct hlist_head *h) -{ - struct hlist_node *first = h->first; - n->next = first; - n->pprev = &h->first; - smp_wmb(); - if (first) - first->pprev = &n->next; - h->first = n; -} - /* next must be != NULL */ static inline void hlist_add_before(struct hlist_node *n, struct hlist_node *next) @@ -847,63 +554,6 @@ static inline void hlist_add_after(struct hlist_node *n, next->next->pprev = &next->next; } -/** - * hlist_add_before_rcu - * @n: the new element to add to the hash list. - * @next: the existing element to add the new element before. - * - * Description: - * Adds the specified element to the specified hlist - * before the specified node while permitting racing traversals. - * - * The caller must take whatever precautions are necessary - * (such as holding appropriate locks) to avoid racing - * with another list-mutation primitive, such as hlist_add_head_rcu() - * or hlist_del_rcu(), running on this same list. - * However, it is perfectly legal to run concurrently with - * the _rcu list-traversal primitives, such as - * hlist_for_each_entry_rcu(), used to prevent memory-consistency - * problems on Alpha CPUs. - */ -static inline void hlist_add_before_rcu(struct hlist_node *n, - struct hlist_node *next) -{ - n->pprev = next->pprev; - n->next = next; - smp_wmb(); - next->pprev = &n->next; - *(n->pprev) = n; -} - -/** - * hlist_add_after_rcu - * @prev: the existing element to add the new element after. - * @n: the new element to add to the hash list. - * - * Description: - * Adds the specified element to the specified hlist - * after the specified node while permitting racing traversals. - * - * The caller must take whatever precautions are necessary - * (such as holding appropriate locks) to avoid racing - * with another list-mutation primitive, such as hlist_add_head_rcu() - * or hlist_del_rcu(), running on this same list. - * However, it is perfectly legal to run concurrently with - * the _rcu list-traversal primitives, such as - * hlist_for_each_entry_rcu(), used to prevent memory-consistency - * problems on Alpha CPUs. - */ -static inline void hlist_add_after_rcu(struct hlist_node *prev, - struct hlist_node *n) -{ - n->next = prev->next; - n->pprev = &prev->next; - smp_wmb(); - prev->next = n; - if (n->next) - n->next->pprev = &n->next; -} - #define hlist_entry(ptr, type, member) container_of(ptr,type,member) #define hlist_for_each(pos, head) \ @@ -964,21 +614,4 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ pos = n) -/** - * hlist_for_each_entry_rcu - iterate over rcu list of given type - * @tpos: the type * to use as a loop cursor. - * @pos: the &struct hlist_node to use as a loop cursor. - * @head: the head for your list. - * @member: the name of the hlist_node within the struct. - * - * This list-traversal primitive may safely run concurrently with - * the _rcu list-mutation primitives such as hlist_add_head_rcu() - * as long as the traversal is guarded by rcu_read_lock(). - */ -#define hlist_for_each_entry_rcu(tpos, pos, head, member) \ - for (pos = rcu_dereference((head)->first); \ - pos && ({ prefetch(pos->next); 1;}) && \ - ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1;}); \ - pos = rcu_dereference(pos->next)) - #endif diff --git a/include/linux/rculist.h b/include/linux/rculist.h new file mode 100644 index 000000000000..aa9b3eb15683 --- /dev/null +++ b/include/linux/rculist.h @@ -0,0 +1,396 @@ +#ifndef _LINUX_RCULIST_H +#define _LINUX_RCULIST_H + +#ifdef __KERNEL__ + +/* + * RCU-protected list version + */ +#include + +/* + * Insert a new entry between two known consecutive entries. + * + * This is only for internal list manipulation where we know + * the prev/next entries already! + */ +static inline void __list_add_rcu(struct list_head *new, + struct list_head *prev, struct list_head *next) +{ + new->next = next; + new->prev = prev; + smp_wmb(); + next->prev = new; + prev->next = new; +} + +/** + * list_add_rcu - add a new entry to rcu-protected list + * @new: new entry to be added + * @head: list head to add it after + * + * Insert a new entry after the specified head. + * This is good for implementing stacks. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as list_add_rcu() + * or list_del_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * list_for_each_entry_rcu(). + */ +static inline void list_add_rcu(struct list_head *new, struct list_head *head) +{ + __list_add_rcu(new, head, head->next); +} + +/** + * list_add_tail_rcu - add a new entry to rcu-protected list + * @new: new entry to be added + * @head: list head to add it before + * + * Insert a new entry before the specified head. + * This is useful for implementing queues. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as list_add_tail_rcu() + * or list_del_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * list_for_each_entry_rcu(). + */ +static inline void list_add_tail_rcu(struct list_head *new, + struct list_head *head) +{ + __list_add_rcu(new, head->prev, head); +} + +/** + * list_del_rcu - deletes entry from list without re-initialization + * @entry: the element to delete from the list. + * + * Note: list_empty() on entry does not return true after this, + * the entry is in an undefined state. It is useful for RCU based + * lockfree traversal. + * + * In particular, it means that we can not poison the forward + * pointers that may still be used for walking the list. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as list_del_rcu() + * or list_add_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * list_for_each_entry_rcu(). + * + * Note that the caller is not permitted to immediately free + * the newly deleted entry. Instead, either synchronize_rcu() + * or call_rcu() must be used to defer freeing until an RCU + * grace period has elapsed. + */ +static inline void list_del_rcu(struct list_head *entry) +{ + __list_del(entry->prev, entry->next); + entry->prev = LIST_POISON2; +} + +/** + * list_replace_rcu - replace old entry by new one + * @old : the element to be replaced + * @new : the new element to insert + * + * The @old entry will be replaced with the @new entry atomically. + * Note: @old should not be empty. + */ +static inline void list_replace_rcu(struct list_head *old, + struct list_head *new) +{ + new->next = old->next; + new->prev = old->prev; + smp_wmb(); + new->next->prev = new; + new->prev->next = new; + old->prev = LIST_POISON2; +} + +/** + * list_splice_init_rcu - splice an RCU-protected list into an existing list. + * @list: the RCU-protected list to splice + * @head: the place in the list to splice the first list into + * @sync: function to sync: synchronize_rcu(), synchronize_sched(), ... + * + * @head can be RCU-read traversed concurrently with this function. + * + * Note that this function blocks. + * + * Important note: the caller must take whatever action is necessary to + * prevent any other updates to @head. In principle, it is possible + * to modify the list as soon as sync() begins execution. + * If this sort of thing becomes necessary, an alternative version + * based on call_rcu() could be created. But only if -really- + * needed -- there is no shortage of RCU API members. + */ +static inline void list_splice_init_rcu(struct list_head *list, + struct list_head *head, + void (*sync)(void)) +{ + struct list_head *first = list->next; + struct list_head *last = list->prev; + struct list_head *at = head->next; + + if (list_empty(head)) + return; + + /* "first" and "last" tracking list, so initialize it. */ + + INIT_LIST_HEAD(list); + + /* + * At this point, the list body still points to the source list. + * Wait for any readers to finish using the list before splicing + * the list body into the new list. Any new readers will see + * an empty list. + */ + + sync(); + + /* + * Readers are finished with the source list, so perform splice. + * The order is important if the new list is global and accessible + * to concurrent RCU readers. Note that RCU readers are not + * permitted to traverse the prev pointers without excluding + * this function. + */ + + last->next = at; + smp_wmb(); + head->next = first; + first->prev = head; + at->prev = last; +} + +/** + * list_for_each_rcu - iterate over an rcu-protected list + * @pos: the &struct list_head to use as a loop cursor. + * @head: the head for your list. + * + * This list-traversal primitive may safely run concurrently with + * the _rcu list-mutation primitives such as list_add_rcu() + * as long as the traversal is guarded by rcu_read_lock(). + */ +#define list_for_each_rcu(pos, head) \ + for (pos = (head)->next; \ + prefetch(rcu_dereference(pos)->next), pos != (head); \ + pos = pos->next) + +#define __list_for_each_rcu(pos, head) \ + for (pos = (head)->next; \ + rcu_dereference(pos) != (head); \ + pos = pos->next) + +/** + * list_for_each_safe_rcu + * @pos: the &struct list_head to use as a loop cursor. + * @n: another &struct list_head to use as temporary storage + * @head: the head for your list. + * + * Iterate over an rcu-protected list, safe against removal of list entry. + * + * This list-traversal primitive may safely run concurrently with + * the _rcu list-mutation primitives such as list_add_rcu() + * as long as the traversal is guarded by rcu_read_lock(). + */ +#define list_for_each_safe_rcu(pos, n, head) \ + for (pos = (head)->next; \ + n = rcu_dereference(pos)->next, pos != (head); \ + pos = n) + +/** + * list_for_each_entry_rcu - iterate over rcu list of given type + * @pos: the type * to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the list_struct within the struct. + * + * This list-traversal primitive may safely run concurrently with + * the _rcu list-mutation primitives such as list_add_rcu() + * as long as the traversal is guarded by rcu_read_lock(). + */ +#define list_for_each_entry_rcu(pos, head, member) \ + for (pos = list_entry((head)->next, typeof(*pos), member); \ + prefetch(rcu_dereference(pos)->member.next), \ + &pos->member != (head); \ + pos = list_entry(pos->member.next, typeof(*pos), member)) + + +/** + * list_for_each_continue_rcu + * @pos: the &struct list_head to use as a loop cursor. + * @head: the head for your list. + * + * Iterate over an rcu-protected list, continuing after current point. + * + * This list-traversal primitive may safely run concurrently with + * the _rcu list-mutation primitives such as list_add_rcu() + * as long as the traversal is guarded by rcu_read_lock(). + */ +#define list_for_each_continue_rcu(pos, head) \ + for ((pos) = (pos)->next; \ + prefetch(rcu_dereference((pos))->next), (pos) != (head); \ + (pos) = (pos)->next) + +/** + * hlist_del_rcu - deletes entry from hash list without re-initialization + * @n: the element to delete from the hash list. + * + * Note: list_unhashed() on entry does not return true after this, + * the entry is in an undefined state. It is useful for RCU based + * lockfree traversal. + * + * In particular, it means that we can not poison the forward + * pointers that may still be used for walking the hash list. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as hlist_add_head_rcu() + * or hlist_del_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * hlist_for_each_entry(). + */ +static inline void hlist_del_rcu(struct hlist_node *n) +{ + __hlist_del(n); + n->pprev = LIST_POISON2; +} + +/** + * hlist_replace_rcu - replace old entry by new one + * @old : the element to be replaced + * @new : the new element to insert + * + * The @old entry will be replaced with the @new entry atomically. + */ +static inline void hlist_replace_rcu(struct hlist_node *old, + struct hlist_node *new) +{ + struct hlist_node *next = old->next; + + new->next = next; + new->pprev = old->pprev; + smp_wmb(); + if (next) + new->next->pprev = &new->next; + *new->pprev = new; + old->pprev = LIST_POISON2; +} + +/** + * hlist_add_head_rcu + * @n: the element to add to the hash list. + * @h: the list to add to. + * + * Description: + * Adds the specified element to the specified hlist, + * while permitting racing traversals. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as hlist_add_head_rcu() + * or hlist_del_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * hlist_for_each_entry_rcu(), used to prevent memory-consistency + * problems on Alpha CPUs. Regardless of the type of CPU, the + * list-traversal primitive must be guarded by rcu_read_lock(). + */ +static inline void hlist_add_head_rcu(struct hlist_node *n, + struct hlist_head *h) +{ + struct hlist_node *first = h->first; + n->next = first; + n->pprev = &h->first; + smp_wmb(); + if (first) + first->pprev = &n->next; + h->first = n; +} + +/** + * hlist_add_before_rcu + * @n: the new element to add to the hash list. + * @next: the existing element to add the new element before. + * + * Description: + * Adds the specified element to the specified hlist + * before the specified node while permitting racing traversals. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as hlist_add_head_rcu() + * or hlist_del_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * hlist_for_each_entry_rcu(), used to prevent memory-consistency + * problems on Alpha CPUs. + */ +static inline void hlist_add_before_rcu(struct hlist_node *n, + struct hlist_node *next) +{ + n->pprev = next->pprev; + n->next = next; + smp_wmb(); + next->pprev = &n->next; + *(n->pprev) = n; +} + +/** + * hlist_add_after_rcu + * @prev: the existing element to add the new element after. + * @n: the new element to add to the hash list. + * + * Description: + * Adds the specified element to the specified hlist + * after the specified node while permitting racing traversals. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as hlist_add_head_rcu() + * or hlist_del_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * hlist_for_each_entry_rcu(), used to prevent memory-consistency + * problems on Alpha CPUs. + */ +static inline void hlist_add_after_rcu(struct hlist_node *prev, + struct hlist_node *n) +{ + n->next = prev->next; + n->pprev = &prev->next; + smp_wmb(); + prev->next = n; + if (n->next) + n->next->pprev = &n->next; +} + +/** + * hlist_for_each_entry_rcu - iterate over rcu list of given type + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + * + * This list-traversal primitive may safely run concurrently with + * the _rcu list-mutation primitives such as hlist_add_head_rcu() + * as long as the traversal is guarded by rcu_read_lock(). + */ +#define hlist_for_each_entry_rcu(tpos, pos, head, member) \ + for (pos = (head)->first; \ + rcu_dereference(pos) && ({ prefetch(pos->next); 1; }) && \ + ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \ + pos = pos->next) + +#endif /* __KERNEL__ */ +#endif diff --git a/kernel/pid.c b/kernel/pid.c index 20d59fa2d493..30bd5d4b2ac7 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include diff --git a/lib/textsearch.c b/lib/textsearch.c index be8bda3862f5..a3e500ad51d7 100644 --- a/lib/textsearch.c +++ b/lib/textsearch.c @@ -97,6 +97,7 @@ #include #include #include +#include #include #include #include diff --git a/net/802/psnap.c b/net/802/psnap.c index 31128cb92a23..ea4643931446 100644 --- a/net/802/psnap.c +++ b/net/802/psnap.c @@ -20,6 +20,7 @@ #include #include #include +#include static LIST_HEAD(snap_list); static DEFINE_SPINLOCK(snap_lock); diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 2a739adaa92b..e7ddbfa0e02f 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c index 72c5976a5ce3..142060f02054 100644 --- a/net/bridge/br_fdb.c +++ b/net/bridge/br_fdb.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c index e38034aa56f5..9e96ffcd29a3 100644 --- a/net/bridge/br_stp.c +++ b/net/bridge/br_stp.c @@ -13,6 +13,7 @@ * 2 of the License, or (at your option) any later version. */ #include +#include #include "br_private.h" #include "br_private_stp.h" diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c index 02c2f7c0b255..643c032a3a57 100644 --- a/net/netlabel/netlabel_domainhash.c +++ b/net/netlabel/netlabel_domainhash.c @@ -30,8 +30,7 @@ */ #include -#include -#include +#include #include #include #include -- cgit v1.2.3 From 10aa9d2cf9878757b003023d33ff90a37aa3044b Mon Sep 17 00:00:00 2001 From: Franck Bui-Huu Date: Mon, 12 May 2008 21:21:06 +0200 Subject: rculist.h: use the rcu API Make almost all list mutation primitives use rcu_assign_pointer(). The main point of this being readability improvement. Signed-off-by: Franck Bui-Huu Cc: "Paul E. McKenney" Cc: Josh Triplett Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- include/linux/rculist.h | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) diff --git a/include/linux/rculist.h b/include/linux/rculist.h index aa9b3eb15683..8d2c81fccfe5 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -7,6 +7,7 @@ * RCU-protected list version */ #include +#include /* * Insert a new entry between two known consecutive entries. @@ -19,9 +20,8 @@ static inline void __list_add_rcu(struct list_head *new, { new->next = next; new->prev = prev; - smp_wmb(); + rcu_assign_pointer(prev->next, new); next->prev = new; - prev->next = new; } /** @@ -110,9 +110,8 @@ static inline void list_replace_rcu(struct list_head *old, { new->next = old->next; new->prev = old->prev; - smp_wmb(); + rcu_assign_pointer(new->prev->next, new); new->next->prev = new; - new->prev->next = new; old->prev = LIST_POISON2; } @@ -166,8 +165,7 @@ static inline void list_splice_init_rcu(struct list_head *list, */ last->next = at; - smp_wmb(); - head->next = first; + rcu_assign_pointer(head->next, first); first->prev = head; at->prev = last; } @@ -280,10 +278,9 @@ static inline void hlist_replace_rcu(struct hlist_node *old, new->next = next; new->pprev = old->pprev; - smp_wmb(); + rcu_assign_pointer(*new->pprev, new); if (next) new->next->pprev = &new->next; - *new->pprev = new; old->pprev = LIST_POISON2; } @@ -310,12 +307,12 @@ static inline void hlist_add_head_rcu(struct hlist_node *n, struct hlist_head *h) { struct hlist_node *first = h->first; + n->next = first; n->pprev = &h->first; - smp_wmb(); + rcu_assign_pointer(h->first, n); if (first) first->pprev = &n->next; - h->first = n; } /** @@ -341,9 +338,8 @@ static inline void hlist_add_before_rcu(struct hlist_node *n, { n->pprev = next->pprev; n->next = next; - smp_wmb(); + rcu_assign_pointer(*(n->pprev), n); next->pprev = &n->next; - *(n->pprev) = n; } /** @@ -369,8 +365,7 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, { n->next = prev->next; n->pprev = &prev->next; - smp_wmb(); - prev->next = n; + rcu_assign_pointer(prev->next, n); if (n->next) n->next->pprev = &n->next; } -- cgit v1.2.3 From d7c0651390b6a03ad53f99faec0ba88109d7191d Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 12 May 2008 21:21:06 +0200 Subject: rcu: fix rcu_try_flip_waitack_needed() to prevent grace-period stall The comment was correct -- need to make the code match the comment. Without this patch, if a CPU goes dynticks idle (and stays there forever) in just the right phase of preemptible-RCU grace-period processing, grace periods stall. The offending sequence of events (courtesy of Promela/spin, at least after I got the liveness criterion coded correctly...) is as follows: o CPU 0 is in dynticks-idle mode. Its dynticks_progress_counter is (say) 10. o CPU 0 takes an interrupt, so rcu_irq_enter() increments CPU 0's dynticks_progress_counter to 11. o CPU 1 is doing RCU grace-period processing in rcu_try_flip_idle(), sees rcu_pending(), so invokes dyntick_save_progress_counter(), which in turn takes a snapshot of CPU 0's dynticks_progress_counter into CPU 0's rcu_dyntick_snapshot -- now set to 11. CPU 1 then updates the RCU grace-period state to rcu_try_flip_waitack(). o CPU 0 returns from its interrupt, so rcu_irq_exit() increments CPU 0's dynticks_progress_counter to 12. o CPU 1 later invokes rcu_try_flip_waitack(), which notices that CPU 0 has not yet responded, and hence in turn invokes rcu_try_flip_waitack_needed(). This function examines the state of CPU 0's dynticks_progress_counter and rcu_dyntick_snapshot variables, which it copies to curr (== 12) and snap (== 11), respectively. Because curr!=snap, the first condition fails. Because curr-snap is only 1 and snap is odd, the second condition fails. rcu_try_flip_waitack_needed() therefore incorrectly concludes that it must wait for CPU 0 to explicitly acknowledge the counter flip. o CPU 0 remains forever in dynticks-idle mode, never taking any more hardware interrupts or any NMIs, and never running any more tasks. (Of course, -something- will usually eventually happen, which might be why we haven't seen this one in the wild. Still should be fixed!) Therefore the grace period never ends. Fix is to make the code match the comment, as shown below. With this fix, the above scenario would be satisfied with curr being even, and allow the grace period to proceed. Signed-off-by: Paul E. McKenney Cc: Peter Zijlstra Cc: Josh Triplett Cc: Dipankar Sarma Cc: Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/rcupreempt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index aaa7976bd85f..27d0748d8d32 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -597,7 +597,7 @@ rcu_try_flip_waitack_needed(int cpu) * that this CPU already acknowledged the counter. */ - if ((curr - snap) > 2 || (snap & 0x1) == 0) + if ((curr - snap) > 2 || (curr & 0x1) == 0) return 0; /* We need this CPU to explicitly acknowledge the counter flip. */ -- cgit v1.2.3 From 78b0e0e9b27b62c4b22f05a147f7a80fa58b1ae3 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 12 May 2008 21:21:06 +0200 Subject: RCU, rculist.h: fix list iterators RCU list iterators: should prefetch ever be optimised out with no side-effects, the current version will lose the barrier completely. Pointed-out-by: Linus Torvalds Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar --- include/linux/rculist.h | 48 +++++++++++++++--------------------------------- 1 file changed, 15 insertions(+), 33 deletions(-) diff --git a/include/linux/rculist.h b/include/linux/rculist.h index 8d2c81fccfe5..b0f39be08b6c 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -180,31 +180,14 @@ static inline void list_splice_init_rcu(struct list_head *list, * as long as the traversal is guarded by rcu_read_lock(). */ #define list_for_each_rcu(pos, head) \ - for (pos = (head)->next; \ - prefetch(rcu_dereference(pos)->next), pos != (head); \ - pos = pos->next) + for (pos = rcu_dereference((head)->next); \ + prefetch(pos->next), pos != (head); \ + pos = rcu_dereference(pos->next)) #define __list_for_each_rcu(pos, head) \ - for (pos = (head)->next; \ - rcu_dereference(pos) != (head); \ - pos = pos->next) - -/** - * list_for_each_safe_rcu - * @pos: the &struct list_head to use as a loop cursor. - * @n: another &struct list_head to use as temporary storage - * @head: the head for your list. - * - * Iterate over an rcu-protected list, safe against removal of list entry. - * - * This list-traversal primitive may safely run concurrently with - * the _rcu list-mutation primitives such as list_add_rcu() - * as long as the traversal is guarded by rcu_read_lock(). - */ -#define list_for_each_safe_rcu(pos, n, head) \ - for (pos = (head)->next; \ - n = rcu_dereference(pos)->next, pos != (head); \ - pos = n) + for (pos = rcu_dereference((head)->next); \ + pos != (head); \ + pos = rcu_dereference(pos->next)) /** * list_for_each_entry_rcu - iterate over rcu list of given type @@ -217,10 +200,9 @@ static inline void list_splice_init_rcu(struct list_head *list, * as long as the traversal is guarded by rcu_read_lock(). */ #define list_for_each_entry_rcu(pos, head, member) \ - for (pos = list_entry((head)->next, typeof(*pos), member); \ - prefetch(rcu_dereference(pos)->member.next), \ - &pos->member != (head); \ - pos = list_entry(pos->member.next, typeof(*pos), member)) + for (pos = list_entry(rcu_dereference((head)->next), typeof(*pos), member); \ + prefetch(pos->member.next), &pos->member != (head); \ + pos = list_entry(rcu_dereference(pos->member.next), typeof(*pos), member)) /** @@ -235,9 +217,9 @@ static inline void list_splice_init_rcu(struct list_head *list, * as long as the traversal is guarded by rcu_read_lock(). */ #define list_for_each_continue_rcu(pos, head) \ - for ((pos) = (pos)->next; \ - prefetch(rcu_dereference((pos))->next), (pos) != (head); \ - (pos) = (pos)->next) + for ((pos) = rcu_dereference((pos)->next); \ + prefetch((pos)->next), (pos) != (head); \ + (pos) = rcu_dereference((pos)->next)) /** * hlist_del_rcu - deletes entry from hash list without re-initialization @@ -382,10 +364,10 @@ static inline void hlist_add_after_rcu(struct hlist_node *prev, * as long as the traversal is guarded by rcu_read_lock(). */ #define hlist_for_each_entry_rcu(tpos, pos, head, member) \ - for (pos = (head)->first; \ - rcu_dereference(pos) && ({ prefetch(pos->next); 1; }) && \ + for (pos = rcu_dereference((head)->first); \ + pos && ({ prefetch(pos->next); 1; }) && \ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; }); \ - pos = pos->next) + pos = rcu_dereference(pos->next)) #endif /* __KERNEL__ */ #endif -- cgit v1.2.3 From e19a98967f49cb63352b3db4818983ea2cec24ba Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Wed, 14 May 2008 16:23:00 -0700 Subject: rcu: remove duplicated include in kernel/rcupreempt_trace.c Removed duplicated include file in kernel/rcupreempt_trace.c Signed-off-by: Huang Weiyi Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/rcupreempt_trace.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/rcupreempt_trace.c b/kernel/rcupreempt_trace.c index 49ac4947af24..5edf82c34bbc 100644 --- a/kernel/rcupreempt_trace.c +++ b/kernel/rcupreempt_trace.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 247ab1a80595100bd7ea61d174f8b7b7e5f8d4bb Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Wed, 14 May 2008 16:23:00 -0700 Subject: rcu: remove duplicated include in kernel/rcupreempt.c Removed duplicated include file in kernel/rcupreempt.c. Signed-off-by: Huang Weiyi Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/rcupreempt.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index 27d0748d8d32..b8e4cdae4e8d 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -51,7 +51,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 711bbdd659b685b45d3f28b29a00f17be6484f38 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 17 May 2008 08:26:25 +0200 Subject: rculist.h: fix include in net/netfilter/nf_conntrack_netlink.c this file has rculist dependency but did not explicitly include it, which broke the build. Signed-off-by: Ingo Molnar --- net/netfilter/nf_conntrack_netlink.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 0edefcfc5949..077bcd228799 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 4f9c16ccfa26691dbb9a5d9e7d5098eb934ccdbe Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 30 Apr 2008 16:20:19 +0200 Subject: [ALSA] soc - tlv320aic3x - revisit clock setup This patch cleans up the clocking setup for aic3x codecs. It drops the dividers table and determines the PLL control values programatically. Under certain conditions, the PLL is disabled entirely which could save some power. Signed-off-by: Daniel Mack Acked-by: Jarkko Nikula Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/codecs/tlv320aic3x.c | 225 +++++++++++++++++------------------------ sound/soc/codecs/tlv320aic3x.h | 4 + 2 files changed, 95 insertions(+), 134 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 09b1661b8a3a..738b3b634d74 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -49,7 +49,7 @@ #include "tlv320aic3x.h" #define AUDIO_NAME "aic3x" -#define AIC3X_VERSION "0.1" +#define AIC3X_VERSION "0.2" /* codec private data */ struct aic3x_priv { @@ -648,81 +648,6 @@ static int aic3x_add_widgets(struct snd_soc_codec *codec) return 0; } -struct aic3x_rate_divs { - u32 mclk; - u32 rate; - u32 fsref_reg; - u8 sr_reg:4; - u8 pllj_reg; - u16 plld_reg; -}; - -/* AIC3X codec mclk clock divider coefficients */ -static const struct aic3x_rate_divs aic3x_divs[] = { - /* 8k */ - {12000000, 8000, 48000, 0xa, 16, 3840}, - {19200000, 8000, 48000, 0xa, 10, 2400}, - {22579200, 8000, 48000, 0xa, 8, 7075}, - {33868800, 8000, 48000, 0xa, 5, 8049}, - /* 11.025k */ - {12000000, 11025, 44100, 0x6, 15, 528}, - {19200000, 11025, 44100, 0x6, 9, 4080}, - {22579200, 11025, 44100, 0x6, 8, 0}, - {33868800, 11025, 44100, 0x6, 5, 3333}, - /* 16k */ - {12000000, 16000, 48000, 0x4, 16, 3840}, - {19200000, 16000, 48000, 0x4, 10, 2400}, - {22579200, 16000, 48000, 0x4, 8, 7075}, - {33868800, 16000, 48000, 0x4, 5, 8049}, - /* 22.05k */ - {12000000, 22050, 44100, 0x2, 15, 528}, - {19200000, 22050, 44100, 0x2, 9, 4080}, - {22579200, 22050, 44100, 0x2, 8, 0}, - {33868800, 22050, 44100, 0x2, 5, 3333}, - /* 32k */ - {12000000, 32000, 48000, 0x1, 16, 3840}, - {19200000, 32000, 48000, 0x1, 10, 2400}, - {22579200, 32000, 48000, 0x1, 8, 7075}, - {33868800, 32000, 48000, 0x1, 5, 8049}, - /* 44.1k */ - {12000000, 44100, 44100, 0x0, 15, 528}, - {19200000, 44100, 44100, 0x0, 9, 4080}, - {22579200, 44100, 44100, 0x0, 8, 0}, - {33868800, 44100, 44100, 0x0, 5, 3333}, - /* 48k */ - {12000000, 48000, 48000, 0x0, 16, 3840}, - {19200000, 48000, 48000, 0x0, 10, 2400}, - {22579200, 48000, 48000, 0x0, 8, 7075}, - {33868800, 48000, 48000, 0x0, 5, 8049}, - /* 64k */ - {12000000, 64000, 96000, 0x1, 16, 3840}, - {19200000, 64000, 96000, 0x1, 10, 2400}, - {22579200, 64000, 96000, 0x1, 8, 7075}, - {33868800, 64000, 96000, 0x1, 5, 8049}, - /* 88.2k */ - {12000000, 88200, 88200, 0x0, 15, 528}, - {19200000, 88200, 88200, 0x0, 9, 4080}, - {22579200, 88200, 88200, 0x0, 8, 0}, - {33868800, 88200, 88200, 0x0, 5, 3333}, - /* 96k */ - {12000000, 96000, 96000, 0x0, 16, 3840}, - {19200000, 96000, 96000, 0x0, 10, 2400}, - {22579200, 96000, 96000, 0x0, 8, 7075}, - {33868800, 96000, 96000, 0x0, 5, 8049}, -}; - -static inline int aic3x_get_divs(int mclk, int rate) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(aic3x_divs); i++) { - if (aic3x_divs[i].rate == rate && aic3x_divs[i].mclk == mclk) - return i; - } - - return 0; -} - static int aic3x_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { @@ -730,49 +655,107 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream, struct snd_soc_device *socdev = rtd->socdev; struct snd_soc_codec *codec = socdev->codec; struct aic3x_priv *aic3x = codec->private_data; - int i; - u8 data, pll_p, pll_r, pll_j; - u16 pll_d; - - i = aic3x_get_divs(aic3x->sysclk, params_rate(params)); + int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0; + u8 data, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1; + u16 pll_d = 1; - /* Route Left DAC to left channel input and - * right DAC to right channel input */ - data = (LDAC2LCH | RDAC2RCH); - switch (aic3x_divs[i].fsref_reg) { - case 44100: - data |= FSREF_44100; + /* select data word length */ + data = + aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLB) & (~(0x3 << 4)); + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: break; - case 48000: - data |= FSREF_48000; + case SNDRV_PCM_FORMAT_S20_3LE: + data |= (0x01 << 4); break; - case 88200: - data |= FSREF_44100 | DUAL_RATE_MODE; + case SNDRV_PCM_FORMAT_S24_LE: + data |= (0x02 << 4); break; - case 96000: - data |= FSREF_48000 | DUAL_RATE_MODE; + case SNDRV_PCM_FORMAT_S32_LE: + data |= (0x03 << 4); break; } + aic3x_write(codec, AIC3X_ASD_INTF_CTRLB, data); + + /* Fsref can be 44100 or 48000 */ + fsref = (params_rate(params) % 11025 == 0) ? 44100 : 48000; + + /* Try to find a value for Q which allows us to bypass the PLL and + * generate CODEC_CLK directly. */ + for (pll_q = 2; pll_q < 18; pll_q++) + if (aic3x->sysclk / (128 * pll_q) == fsref) { + bypass_pll = 1; + break; + } + + if (bypass_pll) { + pll_q &= 0xf; + aic3x_write(codec, AIC3X_PLL_PROGA_REG, pll_q << PLLQ_SHIFT); + aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_CLKDIV); + } else + aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_PLLDIV); + + /* Route Left DAC to left channel input and + * right DAC to right channel input */ + data = (LDAC2LCH | RDAC2RCH); + data |= (fsref == 44100) ? FSREF_44100 : FSREF_48000; + if (params_rate(params) >= 64000) + data |= DUAL_RATE_MODE; aic3x_write(codec, AIC3X_CODEC_DATAPATH_REG, data); /* codec sample rate select */ - data = aic3x_divs[i].sr_reg; + data = (fsref * 20) / params_rate(params); + if (params_rate(params) < 64000) + data /= 2; + data /= 5; + data -= 2; data |= (data << 4); aic3x_write(codec, AIC3X_SAMPLE_RATE_SEL_REG, data); - /* Use PLL for generation Fsref by equation: - * Fsref = (MCLK * K * R)/(2048 * P); - * Fix P = 2 and R = 1 and calculate K, if - * K = J.D, i.e. J - an interger portion of K and D is the fractional - * one with 4 digits of precision; - * Example: - * For MCLK = 22.5792 MHz and Fsref = 48kHz: - * Select P = 2, R= 1, K = 8.7074, which results in J = 8, D = 7074 + if (bypass_pll) + return 0; + + /* Use PLL + * find an apropriate setup for j, d, r and p by iterating over + * p and r - j and d are calculated for each fraction. + * Up to 128 values are probed, the closest one wins the game. + * The sysclk is divided by 1000 to prevent integer overflows. */ - pll_p = 2; - pll_r = 1; - pll_j = aic3x_divs[i].pllj_reg; - pll_d = aic3x_divs[i].plld_reg; + codec_clk = (2048 * fsref) / (aic3x->sysclk / 1000); + + for (r = 1; r <= 16; r++) + for (p = 1; p <= 8; p++) { + int clk, tmp = (codec_clk * pll_r * 10) / pll_p; + u8 j = tmp / 10000; + u16 d = tmp % 10000; + + if (j > 63) + continue; + + if (d != 0 && aic3x->sysclk < 10000000) + continue; + + /* This is actually 1000 * ((j + (d/10000)) * r) / p + * The term had to be converted to get rid of the + * division by 10000 */ + clk = ((10000 * j * r) + (d * r)) / (10 * p); + + /* check whether this values get closer than the best + * ones we had before */ + if (abs(codec_clk - clk) < abs(codec_clk - last_clk)) { + pll_j = j; pll_d = d; pll_r = r; pll_p = p; + last_clk = clk; + } + + /* Early exit for exact matches */ + if (clk == codec_clk) + break; + } + + if (last_clk == 0) { + printk(KERN_ERR "%s(): unable to setup PLL\n", __func__); + return -EINVAL; + } data = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG); aic3x_write(codec, AIC3X_PLL_PROGA_REG, data | (pll_p << PLLP_SHIFT)); @@ -782,24 +765,6 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream, aic3x_write(codec, AIC3X_PLL_PROGD_REG, (pll_d & 0x3F) << PLLD_LSB_SHIFT); - /* select data word length */ - data = - aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLB) & (~(0x3 << 4)); - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S16_LE: - break; - case SNDRV_PCM_FORMAT_S20_3LE: - data |= (0x01 << 4); - break; - case SNDRV_PCM_FORMAT_S24_LE: - data |= (0x02 << 4); - break; - case SNDRV_PCM_FORMAT_S32_LE: - data |= (0x03 << 4); - break; - } - aic3x_write(codec, AIC3X_ASD_INTF_CTRLB, data); - return 0; } @@ -826,16 +791,8 @@ static int aic3x_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai, struct snd_soc_codec *codec = codec_dai->codec; struct aic3x_priv *aic3x = codec->private_data; - switch (freq) { - case 12000000: - case 19200000: - case 22579200: - case 33868800: - aic3x->sysclk = freq; - return 0; - } - - return -EINVAL; + aic3x->sysclk = freq; + return 0; } static int aic3x_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h index d0cdeeb629de..d49d001e6e4c 100644 --- a/sound/soc/codecs/tlv320aic3x.h +++ b/sound/soc/codecs/tlv320aic3x.h @@ -109,6 +109,7 @@ #define LLOPM_CTRL 86 #define RLOPM_CTRL 93 /* Clock generation control register */ +#define AIC3X_GPIOB_REG 101 #define AIC3X_CLKGEN_CTRL_REG 102 /* Page select register bits */ @@ -128,12 +129,15 @@ /* PLL registers bitfields */ #define PLLP_SHIFT 0 +#define PLLQ_SHIFT 3 #define PLLR_SHIFT 0 #define PLLJ_SHIFT 2 #define PLLD_MSB_SHIFT 0 #define PLLD_LSB_SHIFT 2 /* Clock generation register bits */ +#define CODEC_CLKIN_PLLDIV 0 +#define CODEC_CLKIN_CLKDIV 1 #define PLL_CLKIN_SHIFT 4 #define MCLK_SOURCE 0x0 #define PLL_CLKDIV_SHIFT 0 -- cgit v1.2.3 From 54e7e6167d29a4a98207884b2fbd28b0b3fe91f6 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 30 Apr 2008 16:20:52 +0200 Subject: [ALSA] soc - tlv320aic3x - add GPIO support This patch adds support for AIC3x GPIO lines. They can be configured for many possible functions as well as be driven manually. I also introduced i2c read functionality since the GPIO state register has to be read from hardware every time and can not be served from cache. Signed-off-by: Daniel Mack Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/codecs/tlv320aic3x.c | 53 ++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/tlv320aic3x.h | 49 +++++++++++++++++++++++++++++++++++++- 2 files changed, 101 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 738b3b634d74..957996e0eba2 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -138,6 +138,20 @@ static int aic3x_write(struct snd_soc_codec *codec, unsigned int reg, return -EIO; } +/* + * read from the aic3x register space + */ +static int aic3x_read(struct snd_soc_codec *codec, unsigned int reg, + u8 *value) +{ + *value = reg & 0xff; + if (codec->hw_read(codec->control_data, value, 1) != 1) + return -EIO; + + aic3x_write_reg_cache(codec, reg, *value); + return 0; +} + #define SOC_DAPM_SINGLE_AIC3X(xname, reg, shift, mask, invert) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ .info = snd_soc_info_volsw, \ @@ -911,6 +925,33 @@ static int aic3x_dapm_event(struct snd_soc_codec *codec, int event) return 0; } +void aic3x_set_gpio(struct snd_soc_codec *codec, int gpio, int state) +{ + u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG; + u8 bit = gpio ? 3: 0; + u8 val = aic3x_read_reg_cache(codec, reg) & ~(1 << bit); + aic3x_write(codec, reg, val | (!!state << bit)); +} +EXPORT_SYMBOL_GPL(aic3x_set_gpio); + +int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio) +{ + u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG; + u8 val, bit = gpio ? 2: 1; + + aic3x_read(codec, reg, &val); + return (val >> bit) & 1; +} +EXPORT_SYMBOL_GPL(aic3x_get_gpio); + +int aic3x_headset_detected(struct snd_soc_codec *codec) +{ + u8 val; + aic3x_read(codec, AIC3X_RT_IRQ_FLAGS_REG, &val); + return (val >> 2) & 1; +} +EXPORT_SYMBOL_GPL(aic3x_headset_detected); + #define AIC3X_RATES SNDRV_PCM_RATE_8000_96000 #define AIC3X_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) @@ -977,6 +1018,7 @@ static int aic3x_resume(struct platform_device *pdev) static int aic3x_init(struct snd_soc_device *socdev) { struct snd_soc_codec *codec = socdev->codec; + struct aic3x_setup_data *setup = socdev->codec_data; int reg, ret = 0; codec->name = "aic3x"; @@ -1067,6 +1109,10 @@ static int aic3x_init(struct snd_soc_device *socdev) /* off, with power on */ aic3x_dapm_event(codec, SNDRV_CTL_POWER_D3hot); + /* setup GPIO functions */ + aic3x_write(codec, AIC3X_GPIO1_REG, (setup->gpio_func[0] & 0xf) << 4); + aic3x_write(codec, AIC3X_GPIO2_REG, (setup->gpio_func[1] & 0xf) << 4); + aic3x_add_controls(codec); aic3x_add_widgets(codec); ret = snd_soc_register_card(socdev); @@ -1174,6 +1220,12 @@ static struct i2c_client client_template = { .name = "AIC3X", .driver = &aic3x_i2c_driver, }; + +static int aic3x_i2c_read(struct i2c_client *client, u8 *value, int len) +{ + value[0] = i2c_smbus_read_byte_data(client, value[0]); + return (len == 1); +} #endif static int aic3x_probe(struct platform_device *pdev) @@ -1208,6 +1260,7 @@ static int aic3x_probe(struct platform_device *pdev) if (setup->i2c_address) { normal_i2c[0] = setup->i2c_address; codec->hw_write = (hw_write_t) i2c_master_send; + codec->hw_read = (hw_read_t) aic3x_i2c_read; ret = i2c_add_driver(&aic3x_i2c_driver); if (ret != 0) printk(KERN_ERR "can't add i2c driver"); diff --git a/sound/soc/codecs/tlv320aic3x.h b/sound/soc/codecs/tlv320aic3x.h index d49d001e6e4c..c1dd1ac0ceac 100644 --- a/sound/soc/codecs/tlv320aic3x.h +++ b/sound/soc/codecs/tlv320aic3x.h @@ -108,8 +108,14 @@ #define DACR1_2_RLOPM_VOL 92 #define LLOPM_CTRL 86 #define RLOPM_CTRL 93 -/* Clock generation control register */ +/* GPIO/IRQ registers */ +#define AIC3X_STICKY_IRQ_FLAGS_REG 96 +#define AIC3X_RT_IRQ_FLAGS_REG 97 +#define AIC3X_GPIO1_REG 98 +#define AIC3X_GPIO2_REG 99 +#define AIC3X_GPIOA_REG 100 #define AIC3X_GPIOB_REG 101 +/* Clock generation control register */ #define AIC3X_CLKGEN_CTRL_REG 102 /* Page select register bits */ @@ -175,8 +181,49 @@ /* Default input volume */ #define DEFAULT_GAIN 0x20 +/* GPIO API */ +enum { + AIC3X_GPIO1_FUNC_DISABLED = 0, + AIC3X_GPIO1_FUNC_AUDIO_WORDCLK_ADC = 1, + AIC3X_GPIO1_FUNC_CLOCK_MUX = 2, + AIC3X_GPIO1_FUNC_CLOCK_MUX_DIV2 = 3, + AIC3X_GPIO1_FUNC_CLOCK_MUX_DIV4 = 4, + AIC3X_GPIO1_FUNC_CLOCK_MUX_DIV8 = 5, + AIC3X_GPIO1_FUNC_SHORT_CIRCUIT_IRQ = 6, + AIC3X_GPIO1_FUNC_AGC_NOISE_IRQ = 7, + AIC3X_GPIO1_FUNC_INPUT = 8, + AIC3X_GPIO1_FUNC_OUTPUT = 9, + AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK = 10, + AIC3X_GPIO1_FUNC_AUDIO_WORDCLK = 11, + AIC3X_GPIO1_FUNC_BUTTON_IRQ = 12, + AIC3X_GPIO1_FUNC_HEADSET_DETECT_IRQ = 13, + AIC3X_GPIO1_FUNC_HEADSET_DETECT_OR_BUTTON_IRQ = 14, + AIC3X_GPIO1_FUNC_ALL_IRQ = 16 +}; + +enum { + AIC3X_GPIO2_FUNC_DISABLED = 0, + AIC3X_GPIO2_FUNC_HEADSET_DETECT_IRQ = 2, + AIC3X_GPIO2_FUNC_INPUT = 3, + AIC3X_GPIO2_FUNC_OUTPUT = 4, + AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT = 5, + AIC3X_GPIO2_FUNC_AUDIO_BITCLK = 8, + AIC3X_GPIO2_FUNC_HEADSET_DETECT_OR_BUTTON_IRQ = 9, + AIC3X_GPIO2_FUNC_ALL_IRQ = 10, + AIC3X_GPIO2_FUNC_SHORT_CIRCUIT_OR_AGC_IRQ = 11, + AIC3X_GPIO2_FUNC_HEADSET_OR_BUTTON_PRESS_OR_SHORT_CIRCUIT_IRQ = 12, + AIC3X_GPIO2_FUNC_SHORT_CIRCUIT_IRQ = 13, + AIC3X_GPIO2_FUNC_AGC_NOISE_IRQ = 14, + AIC3X_GPIO2_FUNC_BUTTON_PRESS_IRQ = 15 +}; + +void aic3x_set_gpio(struct snd_soc_codec *codec, int gpio, int state); +int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio); +int aic3x_headset_detected(struct snd_soc_codec *codec); + struct aic3x_setup_data { unsigned short i2c_address; + unsigned int gpio_func[2]; }; extern struct snd_soc_codec_dai aic3x_dai; -- cgit v1.2.3 From eeec12bf7b7d80d1c9cae5aae0dff7e2f928c64b Mon Sep 17 00:00:00 2001 From: Graeme Gregory Date: Wed, 30 Apr 2008 19:27:40 +0200 Subject: [ALSA] soc - DAPM - add hook to read state of DAPM widget This adds a hook to read the power state of a DAPM widget, I use this in the gta02 driver to expose certain DAPM widgets in the mixer for ease of audio routing. Signed-off-by: Graeme Gregory Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/soc-dapm.h | 2 ++ sound/soc/soc-dapm.c | 23 +++++++++++++++++++++++ 2 files changed, 25 insertions(+) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index a105b01e06d5..40cc695b69b6 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -223,6 +223,8 @@ int snd_soc_dapm_sys_add(struct device *dev); /* dapm audio endpoint control */ int snd_soc_dapm_set_endpoint(struct snd_soc_codec *codec, char *pin, int status); +int snd_soc_dapm_get_endpoint_status(struct snd_soc_codec *codec, + char *pin); int snd_soc_dapm_sync_endpoints(struct snd_soc_codec *codec); /* dapm widget types */ diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index af3326c63504..9fd5ee818e89 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1342,6 +1342,29 @@ int snd_soc_dapm_set_endpoint(struct snd_soc_codec *codec, } EXPORT_SYMBOL_GPL(snd_soc_dapm_set_endpoint); +/** + * snd_soc_dapm_get_endpoint_status - get audio endpoint status + * @codec: audio codec + * @endpoint: audio signal endpoint (or start point) + * + * Get audio endpoint status - connected or disconnected. + * + * Returns status + */ +int snd_soc_dapm_get_endpoint_status(struct snd_soc_codec *codec, + char *endpoint) +{ + struct snd_soc_dapm_widget *w; + + list_for_each_entry(w, &codec->dapm_widgets, list) { + if (!strcmp(w->name, endpoint)) + return w->connected; + } + + return 0; +} +EXPORT_SYMBOL_GPL(snd_soc_dapm_get_endpoint); + /** * snd_soc_dapm_free - free dapm resources * @socdev: SoC device -- cgit v1.2.3 From 650f6b13318bce6a8d59bfa48fe15b5832623cbc Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 1 May 2008 10:49:18 +0200 Subject: [ALSA] sound: fix export symbol typo Signed-off-by: Stephen Rothwell Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/soc-dapm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 9fd5ee818e89..c60200ccde60 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1363,7 +1363,7 @@ int snd_soc_dapm_get_endpoint_status(struct snd_soc_codec *codec, return 0; } -EXPORT_SYMBOL_GPL(snd_soc_dapm_get_endpoint); +EXPORT_SYMBOL_GPL(snd_soc_dapm_get_endpoint_status); /** * snd_soc_dapm_free - free dapm resources -- cgit v1.2.3 From 1894c59fdb63692f5ba2576875cc558b856935ca Mon Sep 17 00:00:00 2001 From: Tim Niemeyer Date: Mon, 5 May 2008 14:16:12 +0200 Subject: [ALSA] soc - Patch to add debug messages to the neo1973_wm8753 (GTA01) sound driver Signed-off-by: Tim Niemeyer Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/s3c24xx/neo1973_wm8753.c | 46 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index 0e9d1c5f2484..e469186a407d 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -43,6 +43,14 @@ #include "s3c24xx-pcm.h" #include "s3c24xx-i2s.h" +/* Debugging stuff */ +#define S3C24XX_SOC_NEO1973_WM8753_DEBUG 0 +#if S3C24XX_SOC_NEO1973_WM8753_DEBUG +#define DBG(x...) printk(KERN_DEBUG "s3c24xx-soc-neo1973-wm8753: " x) +#else +#define DBG(x...) +#endif + /* define the scenarios */ #define NEO_AUDIO_OFF 0 #define NEO_GSM_CALL_AUDIO_HANDSET 1 @@ -67,6 +75,8 @@ static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream, int ret = 0; unsigned long iis_clkrate; + DBG("Entered %s\n", __func__); + iis_clkrate = s3c24xx_i2s_get_clockrate(); switch (params_rate(params)) { @@ -151,6 +161,8 @@ static int neo1973_hifi_hw_free(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; + DBG("Entered %s\n", __func__); + /* disable the PLL */ return codec_dai->dai_ops.set_pll(codec_dai, WM8753_PLL1, 0, 0); } @@ -172,6 +184,8 @@ static int neo1973_voice_hw_params(struct snd_pcm_substream *substream, int ret = 0; unsigned long iis_clkrate; + DBG("Entered %s\n", __func__); + iis_clkrate = s3c24xx_i2s_get_clockrate(); if (params_rate(params) != 8000) @@ -213,6 +227,8 @@ static int neo1973_voice_hw_free(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; + DBG("Entered %s\n", __func__); + /* disable the PLL */ return codec_dai->dai_ops.set_pll(codec_dai, WM8753_PLL2, 0, 0); } @@ -233,6 +249,8 @@ static int neo1973_get_scenario(struct snd_kcontrol *kcontrol, static int set_scenario_endpoints(struct snd_soc_codec *codec, int scenario) { + DBG("Entered %s\n", __func__); + switch (neo1973_scenario) { case NEO_AUDIO_OFF: snd_soc_dapm_set_endpoint(codec, "Audio Out", 0); @@ -315,6 +333,8 @@ static int neo1973_set_scenario(struct snd_kcontrol *kcontrol, { struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + DBG("Entered %s\n", __func__); + if (neo1973_scenario == ucontrol->value.integer.value[0]) return 0; @@ -327,6 +347,8 @@ static u8 lm4857_regs[4] = {0x00, 0x40, 0x80, 0xC0}; static void lm4857_write_regs(void) { + DBG("Entered %s\n", __func__); + if (i2c_master_send(i2c, lm4857_regs, 4) != 4) printk(KERN_ERR "lm4857: i2c write failed\n"); } @@ -338,6 +360,8 @@ static int lm4857_get_reg(struct snd_kcontrol *kcontrol, int shift = (kcontrol->private_value >> 8) & 0x0F; int mask = (kcontrol->private_value >> 16) & 0xFF; + DBG("Entered %s\n", __func__); + ucontrol->value.integer.value[0] = (lm4857_regs[reg] >> shift) & mask; return 0; } @@ -364,6 +388,8 @@ static int lm4857_get_mode(struct snd_kcontrol *kcontrol, { u8 value = lm4857_regs[LM4857_CTRL] & 0x0F; + DBG("Entered %s\n", __func__); + if (value) value -= 5; @@ -376,6 +402,8 @@ static int lm4857_set_mode(struct snd_kcontrol *kcontrol, { u8 value = ucontrol->value.integer.value[0]; + DBG("Entered %s\n", __func__); + if (value) value += 5; @@ -483,6 +511,8 @@ static int neo1973_wm8753_init(struct snd_soc_codec *codec) { int i, err; + DBG("Entered %s\n", __func__); + /* set up NC codec pins */ snd_soc_dapm_set_endpoint(codec, "LOUT2", 0); snd_soc_dapm_set_endpoint(codec, "ROUT2", 0); @@ -583,6 +613,8 @@ static int lm4857_amp_probe(struct i2c_adapter *adap, int addr, int kind) { int ret; + DBG("Entered %s\n", __func__); + client_template.adapter = adap; client_template.addr = addr; @@ -606,6 +638,8 @@ exit_err: static int lm4857_i2c_detach(struct i2c_client *client) { + DBG("Entered %s\n", __func__); + i2c_detach_client(client); kfree(client); return 0; @@ -613,6 +647,8 @@ static int lm4857_i2c_detach(struct i2c_client *client) static int lm4857_i2c_attach(struct i2c_adapter *adap) { + DBG("Entered %s\n", __func__); + return i2c_probe(adap, &addr_data, lm4857_amp_probe); } @@ -620,6 +656,8 @@ static u8 lm4857_state; static int lm4857_suspend(struct i2c_client *dev, pm_message_t state) { + DBG("Entered %s\n", __func__); + dev_dbg(&dev->dev, "lm4857_suspend\n"); lm4857_state = lm4857_regs[LM4857_CTRL] & 0xf; if (lm4857_state) { @@ -631,6 +669,8 @@ static int lm4857_suspend(struct i2c_client *dev, pm_message_t state) static int lm4857_resume(struct i2c_client *dev) { + DBG("Entered %s\n", __func__); + if (lm4857_state) { lm4857_regs[LM4857_CTRL] |= (lm4857_state & 0x0f); lm4857_write_regs(); @@ -640,6 +680,8 @@ static int lm4857_resume(struct i2c_client *dev) static void lm4857_shutdown(struct i2c_client *dev) { + DBG("Entered %s\n", __func__); + dev_dbg(&dev->dev, "lm4857_shutdown\n"); lm4857_regs[LM4857_CTRL] &= 0xf0; lm4857_write_regs(); @@ -671,6 +713,8 @@ static int __init neo1973_init(void) { int ret; + DBG("Entered %s\n", __func__); + neo1973_snd_device = platform_device_alloc("soc-audio", -1); if (!neo1973_snd_device) return -ENOMEM; @@ -691,6 +735,8 @@ static int __init neo1973_init(void) static void __exit neo1973_exit(void) { + DBG("Entered %s\n", __func__); + i2c_del_driver(&lm4857_i2c_driver); platform_device_unregister(neo1973_snd_device); } -- cgit v1.2.3 From 87af38dafe4f930921b9217c21ec6d72cad56bcc Mon Sep 17 00:00:00 2001 From: Daniel Jacobowitz Date: Wed, 7 May 2008 12:05:10 +0200 Subject: [ALSA] ac97 - Add virtual master control to VT1616/VT1617A codec. Enable VMASTER for VT1616 / VT1617A codec. Signed-off-by: Daniel Jacobowitz Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/drivers/Kconfig | 1 + sound/pci/ac97/ac97_patch.c | 76 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 77 insertions(+) diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig index 602b58e3b55d..159137bf4c11 100644 --- a/sound/drivers/Kconfig +++ b/sound/drivers/Kconfig @@ -58,6 +58,7 @@ config SND_AC97_CODEC tristate select SND_PCM select AC97_BUS + select SND_VMASTER config SND_DUMMY tristate "Dummy (/dev/null) soundcard" diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 1292dcee072d..92817f7d46d2 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -3352,8 +3352,66 @@ AC97_SINGLE("Downmix LFE and Center to Front", 0x5a, 12, 1, 0), AC97_SINGLE("Downmix Surround to Front", 0x5a, 11, 1, 0), }; +static const char *slave_vols_vt1616[] = { + "Front Playback Volume", + "Surround Playback Volume", + "Center Playback Volume", + "LFE Playback Volume", + NULL +}; + +static const char *slave_sws_vt1616[] = { + "Front Playback Switch", + "Surround Playback Switch", + "Center Playback Switch", + "LFE Playback Switch", + NULL +}; + +/* find a mixer control element with the given name */ +static struct snd_kcontrol *snd_ac97_find_mixer_ctl(struct snd_ac97 *ac97, + const char *name) +{ + struct snd_ctl_elem_id id; + memset(&id, 0, sizeof(id)); + id.iface = SNDRV_CTL_ELEM_IFACE_MIXER; + strcpy(id.name, name); + return snd_ctl_find_id(ac97->bus->card, &id); +} + +/* create a virtual master control and add slaves */ +int snd_ac97_add_vmaster(struct snd_ac97 *ac97, char *name, + const unsigned int *tlv, const char **slaves) +{ + struct snd_kcontrol *kctl; + const char **s; + int err; + + kctl = snd_ctl_make_virtual_master(name, tlv); + if (!kctl) + return -ENOMEM; + err = snd_ctl_add(ac97->bus->card, kctl); + if (err < 0) + return err; + + for (s = slaves; *s; s++) { + struct snd_kcontrol *sctl; + + sctl = snd_ac97_find_mixer_ctl(ac97, *s); + if (!sctl) { + snd_printdd("Cannot find slave %s, skipped\n", *s); + continue; + } + err = snd_ctl_add_slave(kctl, sctl); + if (err < 0) + return err; + } + return 0; +} + static int patch_vt1616_specific(struct snd_ac97 * ac97) { + struct snd_kcontrol *kctl; int err; if (snd_ac97_try_bit(ac97, 0x5a, 9)) @@ -3361,6 +3419,24 @@ static int patch_vt1616_specific(struct snd_ac97 * ac97) return err; if ((err = patch_build_controls(ac97, &snd_ac97_controls_vt1616[1], ARRAY_SIZE(snd_ac97_controls_vt1616) - 1)) < 0) return err; + + /* There is already a misnamed master switch. Rename it. */ + kctl = snd_ac97_find_mixer_ctl(ac97, "Master Playback Volume"); + if (!kctl) + return -EINVAL; + + snd_ac97_rename_vol_ctl(ac97, "Master Playback", "Front Playback"); + + err = snd_ac97_add_vmaster(ac97, "Master Playback Volume", + kctl->tlv.p, slave_vols_vt1616); + if (err < 0) + return err; + + err = snd_ac97_add_vmaster(ac97, "Master Playback Switch", + NULL, slave_sws_vt1616); + if (err < 0) + return err; + return 0; } -- cgit v1.2.3 From 48008b598bb9cfffbd871512f49d84eb5b885a00 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 8 May 2008 13:01:32 +0200 Subject: [ALSA] i2c: cs8427.c use put_unaligned helper Signed-off-by: Harvey Harrison Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/i2c/cs8427.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/sound/i2c/cs8427.c b/sound/i2c/cs8427.c index e57e9cbe6a0f..9c3d361accfb 100644 --- a/sound/i2c/cs8427.c +++ b/sound/i2c/cs8427.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -264,10 +265,7 @@ int snd_cs8427_create(struct snd_i2c_bus *bus, goto __fail; } /* write default channel status bytes */ - buf[0] = ((unsigned char)(SNDRV_PCM_DEFAULT_CON_SPDIF >> 0)); - buf[1] = ((unsigned char)(SNDRV_PCM_DEFAULT_CON_SPDIF >> 8)); - buf[2] = ((unsigned char)(SNDRV_PCM_DEFAULT_CON_SPDIF >> 16)); - buf[3] = ((unsigned char)(SNDRV_PCM_DEFAULT_CON_SPDIF >> 24)); + put_unaligned_le32(SNDRV_PCM_DEFAULT_CON_SPDIF, buf); memset(buf + 4, 0, 24 - 4); if (snd_cs8427_send_corudata(device, 0, buf, 24) < 0) goto __fail; -- cgit v1.2.3 From f3e9d5d1fd6a164611043c053de585a35d76d6a9 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Thu, 8 May 2008 15:42:15 +0200 Subject: [ALSA] snd_usb_caiaq: add support for 'Session I/O' interface This patch adds suport for Native Instruments new 'Guitar Rig Session I/O' audio hardware. Signed-off-by: Daniel Mack Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/usb/caiaq/caiaq-audio.c | 1 + sound/usb/caiaq/caiaq-device.c | 12 +++++++++--- sound/usb/caiaq/caiaq-device.h | 1 + 3 files changed, 11 insertions(+), 3 deletions(-) diff --git a/sound/usb/caiaq/caiaq-audio.c b/sound/usb/caiaq/caiaq-audio.c index 24970a5c888f..b3a603325835 100644 --- a/sound/usb/caiaq/caiaq-audio.c +++ b/sound/usb/caiaq/caiaq-audio.c @@ -637,6 +637,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev) switch (dev->chip.usb_id) { case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1): case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): + case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_SESSIONIO): dev->samplerates |= SNDRV_PCM_RATE_88200; dev->samplerates |= SNDRV_PCM_RATE_192000; break; diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c index a972f77bd785..83175083e50f 100644 --- a/sound/usb/caiaq/caiaq-device.c +++ b/sound/usb/caiaq/caiaq-device.c @@ -42,14 +42,15 @@ #endif MODULE_AUTHOR("Daniel Mack "); -MODULE_DESCRIPTION("caiaq USB audio, version 1.3.6"); +MODULE_DESCRIPTION("caiaq USB audio, version 1.3.8"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2}," "{Native Instruments, RigKontrol3}," "{Native Instruments, Kore Controller}," "{Native Instruments, Kore Controller 2}," - "{Native Instruments, Audio Kontrol 1}" - "{Native Instruments, Audio 8 DJ}}"); + "{Native Instruments, Audio Kontrol 1}," + "{Native Instruments, Audio 8 DJ}," + "{Native Instruments, Session I/O}}"); static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */ static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */ @@ -110,6 +111,11 @@ static struct usb_device_id snd_usb_id_table[] = { .idVendor = USB_VID_NATIVEINSTRUMENTS, .idProduct = USB_PID_AUDIO8DJ }, + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, + .idVendor = USB_VID_NATIVEINSTRUMENTS, + .idProduct = USB_PID_SESSIONIO + }, { /* terminator */ } }; diff --git a/sound/usb/caiaq/caiaq-device.h b/sound/usb/caiaq/caiaq-device.h index 96a491379c60..f9fbdbae269d 100644 --- a/sound/usb/caiaq/caiaq-device.h +++ b/sound/usb/caiaq/caiaq-device.h @@ -11,6 +11,7 @@ #define USB_PID_KORECONTROLLER2 0x4712 #define USB_PID_AK1 0x0815 #define USB_PID_AUDIO8DJ 0x1978 +#define USB_PID_SESSIONIO 0x1915 #define EP1_BUFSIZE 64 #define CAIAQ_USB_STR_LEN 0xff -- cgit v1.2.3 From c17cf06bfc4417a79d452c266e819c510f6a8344 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 9 May 2008 12:45:56 +0200 Subject: [ALSA] Remove unneeded ugly hack for i386 in memalloc.c The hack for dma_alloc_coherent() is no longer needed on 2.6.26 since the base code was improved. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/core/memalloc.c | 62 --------------------------------------------------- 1 file changed, 62 deletions(-) diff --git a/sound/core/memalloc.c b/sound/core/memalloc.c index 23b7bc02728b..f5d6d8d12979 100644 --- a/sound/core/memalloc.c +++ b/sound/core/memalloc.c @@ -79,68 +79,6 @@ struct snd_mem_list { #define snd_assert(expr, args...) /**/ #endif -/* - * Hacks - */ - -#if defined(__i386__) -/* - * A hack to allocate large buffers via dma_alloc_coherent() - * - * since dma_alloc_coherent always tries GFP_DMA when the requested - * pci memory region is below 32bit, it happens quite often that even - * 2 order of pages cannot be allocated. - * - * so in the following, we allocate at first without dma_mask, so that - * allocation will be done without GFP_DMA. if the area doesn't match - * with the requested region, then realloate with the original dma_mask - * again. - * - * Really, we want to move this type of thing into dma_alloc_coherent() - * so dma_mask doesn't have to be messed with. - */ - -static void *snd_dma_hack_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, - gfp_t flags) -{ - void *ret; - u64 dma_mask, coherent_dma_mask; - - if (dev == NULL || !dev->dma_mask) - return dma_alloc_coherent(dev, size, dma_handle, flags); - dma_mask = *dev->dma_mask; - coherent_dma_mask = dev->coherent_dma_mask; - *dev->dma_mask = 0xffffffff; /* do without masking */ - dev->coherent_dma_mask = 0xffffffff; /* do without masking */ - ret = dma_alloc_coherent(dev, size, dma_handle, flags); - *dev->dma_mask = dma_mask; /* restore */ - dev->coherent_dma_mask = coherent_dma_mask; /* restore */ - if (ret) { - /* obtained address is out of range? */ - if (((unsigned long)*dma_handle + size - 1) & ~dma_mask) { - /* reallocate with the proper mask */ - dma_free_coherent(dev, size, ret, *dma_handle); - ret = dma_alloc_coherent(dev, size, dma_handle, flags); - } - } else { - /* wish to success now with the proper mask... */ - if (dma_mask != 0xffffffffUL) { - /* allocation with GFP_ATOMIC to avoid the long stall */ - flags &= ~GFP_KERNEL; - flags |= GFP_ATOMIC; - ret = dma_alloc_coherent(dev, size, dma_handle, flags); - } - } - return ret; -} - -/* redefine dma_alloc_coherent for some architectures */ -#undef dma_alloc_coherent -#define dma_alloc_coherent snd_dma_hack_alloc_coherent - -#endif /* arch */ - /* * * Generic memory allocators -- cgit v1.2.3 From d023dc0aa25d6a4f7dd0d109179a2077d22a7ad2 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 13 May 2008 09:18:27 +0200 Subject: [ALSA] oxygen: fix version in MODULE_LICENSE Adjust the MODULE_LICENSE strings to properly reflect the actual license. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- sound/pci/oxygen/hifier.c | 2 +- sound/pci/oxygen/oxygen.c | 2 +- sound/pci/oxygen/oxygen_lib.c | 2 +- sound/pci/oxygen/virtuoso.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c index 090dd4354a28..c5d2c86cacb2 100644 --- a/sound/pci/oxygen/hifier.c +++ b/sound/pci/oxygen/hifier.c @@ -28,7 +28,7 @@ MODULE_AUTHOR("Clemens Ladisch "); MODULE_DESCRIPTION("TempoTec HiFier driver"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c index 63f185c1ed1e..c1b30cc75935 100644 --- a/sound/pci/oxygen/oxygen.c +++ b/sound/pci/oxygen/oxygen.c @@ -43,7 +43,7 @@ MODULE_AUTHOR("Clemens Ladisch "); MODULE_DESCRIPTION("C-Media CMI8788 driver"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_SUPPORTED_DEVICE("{{C-Media,CMI8788}}"); static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c index 897697d43506..6e3879527dcd 100644 --- a/sound/pci/oxygen/oxygen_lib.c +++ b/sound/pci/oxygen/oxygen_lib.c @@ -32,7 +32,7 @@ MODULE_AUTHOR("Clemens Ladisch "); MODULE_DESCRIPTION("C-Media CMI8788 helper library"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); static irqreturn_t oxygen_interrupt(int dummy, void *dev_id) diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index 7f84fa5deca2..4618a622a296 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -79,7 +79,7 @@ MODULE_AUTHOR("Clemens Ladisch "); MODULE_DESCRIPTION("Asus AVx00 driver"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); MODULE_SUPPORTED_DEVICE("{{Asus,AV100},{Asus,AV200}}"); static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; -- cgit v1.2.3 From c13650079ba3bed1c0bdd9bf4a13274be7676ff6 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 13 May 2008 09:19:53 +0200 Subject: [ALSA] oxygen: add symbol for I/O space size Remove another magic number - add a symbol for the size of the PCI I/O range. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- sound/pci/oxygen/oxygen.h | 2 ++ sound/pci/oxygen/oxygen_lib.c | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/pci/oxygen/oxygen.h b/sound/pci/oxygen/oxygen.h index a71c6e059260..6c6efede4d2f 100644 --- a/sound/pci/oxygen/oxygen.h +++ b/sound/pci/oxygen/oxygen.h @@ -16,6 +16,8 @@ #define PCM_AC97 5 #define PCM_COUNT 6 +#define OXYGEN_IO_SIZE 0x100 + /* model-specific configuration of outputs/inputs */ #define PLAYBACK_0_TO_I2S 0x001 #define PLAYBACK_1_TO_SPDIF 0x004 diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c index 6e3879527dcd..60bc15917349 100644 --- a/sound/pci/oxygen/oxygen_lib.c +++ b/sound/pci/oxygen/oxygen_lib.c @@ -173,7 +173,7 @@ static void oxygen_proc_read(struct snd_info_entry *entry, int i, j; snd_iprintf(buffer, "CMI8788\n\n"); - for (i = 0; i < 0x100; i += 0x10) { + for (i = 0; i < OXYGEN_IO_SIZE; i += 0x10) { snd_iprintf(buffer, "%02x:", i); for (j = 0; j < 0x10; ++j) snd_iprintf(buffer, " %02x", oxygen_read8(chip, i + j)); @@ -455,7 +455,7 @@ int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, } if (!(pci_resource_flags(pci, 0) & IORESOURCE_IO) || - pci_resource_len(pci, 0) < 0x100) { + pci_resource_len(pci, 0) < OXYGEN_IO_SIZE) { snd_printk(KERN_ERR "invalid PCI I/O range\n"); err = -ENXIO; goto err_pci_regions; -- cgit v1.2.3 From e58aee95806c9d2bbcfc84cb85ce958e360165ef Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 13 May 2008 09:20:51 +0200 Subject: [ALSA] oxygen: save register writes Save the written values of all CMI8788 and AC97 registers and of some of the DAC/ADC registers so that it is possible to restore the register state later. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- sound/pci/oxygen/oxygen.c | 17 +++++++++++--- sound/pci/oxygen/oxygen.h | 6 +++++ sound/pci/oxygen/oxygen_io.c | 22 ++++++++++++++---- sound/pci/oxygen/virtuoso.c | 54 ++++++++++++++++++++++++-------------------- 4 files changed, 67 insertions(+), 32 deletions(-) diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c index c1b30cc75935..8287ac28fe78 100644 --- a/sound/pci/oxygen/oxygen.c +++ b/sound/pci/oxygen/oxygen.c @@ -80,6 +80,7 @@ MODULE_DEVICE_TABLE(pci, oxygen_ids); struct generic_data { u8 ak4396_ctl2; + u16 saved_wm8785_registers[2]; }; static void ak4396_write(struct oxygen *chip, unsigned int codec, @@ -99,12 +100,16 @@ static void ak4396_write(struct oxygen *chip, unsigned int codec, static void wm8785_write(struct oxygen *chip, u8 reg, unsigned int value) { + struct generic_data *data = chip->model_data; + oxygen_write_spi(chip, OXYGEN_SPI_TRIGGER | OXYGEN_SPI_DATA_LENGTH_2 | OXYGEN_SPI_CLOCK_160 | (3 << OXYGEN_SPI_CODEC_SHIFT) | OXYGEN_SPI_CEN_LATCH_CLOCK_LO, (reg << 9) | value); + if (reg < ARRAY_SIZE(data->saved_wm8785_registers)) + data->saved_wm8785_registers[reg] = value; } static void ak4396_init(struct oxygen *chip) @@ -135,10 +140,16 @@ static void ak5385_init(struct oxygen *chip) static void wm8785_init(struct oxygen *chip) { + struct generic_data *data = chip->model_data; + + data->saved_wm8785_registers[0] = WM8785_MCR_SLAVE | + WM8785_OSR_SINGLE | WM8785_FORMAT_LJUST; + data->saved_wm8785_registers[1] = WM8785_WL_24; + wm8785_write(chip, WM8785_R7, 0); - wm8785_write(chip, WM8785_R0, WM8785_MCR_SLAVE | - WM8785_OSR_SINGLE | WM8785_FORMAT_LJUST); - wm8785_write(chip, WM8785_R1, WM8785_WL_24); + wm8785_write(chip, WM8785_R0, data->saved_wm8785_registers[0]); + wm8785_write(chip, WM8785_R1, data->saved_wm8785_registers[1]); + snd_component_add(chip->card, "WM8785"); } diff --git a/sound/pci/oxygen/oxygen.h b/sound/pci/oxygen/oxygen.h index 6c6efede4d2f..29c9fa4964b2 100644 --- a/sound/pci/oxygen/oxygen.h +++ b/sound/pci/oxygen/oxygen.h @@ -80,6 +80,12 @@ struct oxygen { struct work_struct spdif_input_bits_work; struct work_struct gpio_work; wait_queue_head_t ac97_waitqueue; + union { + u8 _8[OXYGEN_IO_SIZE]; + __le16 _16[OXYGEN_IO_SIZE / 2]; + __le32 _32[OXYGEN_IO_SIZE / 4]; + } saved_registers; + u16 saved_ac97_registers[2][0x40]; }; struct oxygen_model { diff --git a/sound/pci/oxygen/oxygen_io.c b/sound/pci/oxygen/oxygen_io.c index 5569606ee87f..83f135f80df4 100644 --- a/sound/pci/oxygen/oxygen_io.c +++ b/sound/pci/oxygen/oxygen_io.c @@ -44,18 +44,21 @@ EXPORT_SYMBOL(oxygen_read32); void oxygen_write8(struct oxygen *chip, unsigned int reg, u8 value) { outb(value, chip->addr + reg); + chip->saved_registers._8[reg] = value; } EXPORT_SYMBOL(oxygen_write8); void oxygen_write16(struct oxygen *chip, unsigned int reg, u16 value) { outw(value, chip->addr + reg); + chip->saved_registers._16[reg / 2] = cpu_to_le16(value); } EXPORT_SYMBOL(oxygen_write16); void oxygen_write32(struct oxygen *chip, unsigned int reg, u32 value) { outl(value, chip->addr + reg); + chip->saved_registers._32[reg / 4] = cpu_to_le32(value); } EXPORT_SYMBOL(oxygen_write32); @@ -63,7 +66,10 @@ void oxygen_write8_masked(struct oxygen *chip, unsigned int reg, u8 value, u8 mask) { u8 tmp = inb(chip->addr + reg); - outb((tmp & ~mask) | (value & mask), chip->addr + reg); + tmp &= ~mask; + tmp |= value & mask; + outb(tmp, chip->addr + reg); + chip->saved_registers._8[reg] = tmp; } EXPORT_SYMBOL(oxygen_write8_masked); @@ -71,7 +77,10 @@ void oxygen_write16_masked(struct oxygen *chip, unsigned int reg, u16 value, u16 mask) { u16 tmp = inw(chip->addr + reg); - outw((tmp & ~mask) | (value & mask), chip->addr + reg); + tmp &= ~mask; + tmp |= value & mask; + outw(tmp, chip->addr + reg); + chip->saved_registers._16[reg / 2] = cpu_to_le16(tmp); } EXPORT_SYMBOL(oxygen_write16_masked); @@ -79,7 +88,10 @@ void oxygen_write32_masked(struct oxygen *chip, unsigned int reg, u32 value, u32 mask) { u32 tmp = inl(chip->addr + reg); - outl((tmp & ~mask) | (value & mask), chip->addr + reg); + tmp &= ~mask; + tmp |= value & mask; + outl(tmp, chip->addr + reg); + chip->saved_registers._32[reg / 4] = cpu_to_le32(tmp); } EXPORT_SYMBOL(oxygen_write32_masked); @@ -128,8 +140,10 @@ void oxygen_write_ac97(struct oxygen *chip, unsigned int codec, oxygen_write32(chip, OXYGEN_AC97_REGS, reg); /* require two "completed" writes, just to be sure */ if (oxygen_ac97_wait(chip, OXYGEN_AC97_INT_WRITE_DONE) >= 0 && - ++succeeded >= 2) + ++succeeded >= 2) { + chip->saved_ac97_registers[codec][index / 2] = data; return; + } } snd_printk(KERN_ERR "AC'97 write timeout\n"); } diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index 4618a622a296..110786b2e3b8 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -132,6 +132,9 @@ struct xonar_data { u8 ext_power_int_reg; u8 ext_power_bit; u8 has_power; + u8 pcm1796_oversampling; + u8 cs4398_fm; + u8 cs4362a_fm; }; static void pcm1796_write(struct oxygen *chip, unsigned int codec, @@ -186,12 +189,13 @@ static void xonar_d2_init(struct oxygen *chip) data->anti_pop_delay = 300; data->output_enable_bit = GPIO_D2_OUTPUT_ENABLE; + data->pcm1796_oversampling = PCM1796_OS_64; for (i = 0; i < 4; ++i) { pcm1796_write(chip, i, 18, PCM1796_MUTE | PCM1796_DMF_DISABLED | PCM1796_FMT_24_LJUST | PCM1796_ATLD); pcm1796_write(chip, i, 19, PCM1796_FLT_SHARP | PCM1796_ATS_1); - pcm1796_write(chip, i, 20, PCM1796_OS_64); + pcm1796_write(chip, i, 20, data->pcm1796_oversampling); pcm1796_write(chip, i, 21, 0); pcm1796_write(chip, i, 16, 0x0f); /* set ATL/ATR after ATLD */ pcm1796_write(chip, i, 17, 0x0f); @@ -226,6 +230,9 @@ static void xonar_dx_init(struct oxygen *chip) data->ext_power_reg = OXYGEN_GPI_DATA; data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK; data->ext_power_bit = GPI_DX_EXT_POWER; + data->cs4398_fm = CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST; + data->cs4362a_fm = CS4362A_FM_SINGLE | + CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L; oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS, OXYGEN_2WIRE_LENGTH_8 | @@ -236,8 +243,7 @@ static void xonar_dx_init(struct oxygen *chip) cs4398_write(chip, 8, CS4398_CPEN | CS4398_PDN); cs4362a_write(chip, 0x01, CS4362A_PDN | CS4362A_CPEN); /* configure */ - cs4398_write(chip, 2, CS4398_FM_SINGLE | - CS4398_DEM_NONE | CS4398_DIF_LJUST); + cs4398_write(chip, 2, data->cs4398_fm); cs4398_write(chip, 3, CS4398_ATAPI_B_R | CS4398_ATAPI_A_L); cs4398_write(chip, 4, CS4398_MUTEP_LOW | CS4398_PAMUTE); cs4398_write(chip, 5, 0xfe); @@ -249,16 +255,13 @@ static void xonar_dx_init(struct oxygen *chip) CS4362A_RMP_UP | CS4362A_ZERO_CROSS | CS4362A_SOFT_RAMP); cs4362a_write(chip, 0x04, CS4362A_RMP_DN | CS4362A_DEM_NONE); cs4362a_write(chip, 0x05, 0); - cs4362a_write(chip, 0x06, CS4362A_FM_SINGLE | - CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L); + cs4362a_write(chip, 0x06, data->cs4362a_fm); cs4362a_write(chip, 0x07, 0x7f | CS4362A_MUTE); cs4362a_write(chip, 0x08, 0x7f | CS4362A_MUTE); - cs4362a_write(chip, 0x09, CS4362A_FM_SINGLE | - CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L); + cs4362a_write(chip, 0x09, data->cs4362a_fm); cs4362a_write(chip, 0x0a, 0x7f | CS4362A_MUTE); cs4362a_write(chip, 0x0b, 0x7f | CS4362A_MUTE); - cs4362a_write(chip, 0x0c, CS4362A_FM_SINGLE | - CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L); + cs4362a_write(chip, 0x0c, data->cs4362a_fm); cs4362a_write(chip, 0x0d, 0x7f | CS4362A_MUTE); cs4362a_write(chip, 0x0e, 0x7f | CS4362A_MUTE); /* clear power down */ @@ -294,12 +297,13 @@ static void xonar_dx_cleanup(struct oxygen *chip) static void set_pcm1796_params(struct oxygen *chip, struct snd_pcm_hw_params *params) { + struct xonar_data *data = chip->model_data; unsigned int i; - u8 value; - value = params_rate(params) >= 96000 ? PCM1796_OS_32 : PCM1796_OS_64; + data->pcm1796_oversampling = + params_rate(params) >= 96000 ? PCM1796_OS_32 : PCM1796_OS_64; for (i = 0; i < 4; ++i) - pcm1796_write(chip, i, 20, value); + pcm1796_write(chip, i, 20, data->pcm1796_oversampling); } static void update_pcm1796_volume(struct oxygen *chip) @@ -342,24 +346,24 @@ static void set_cs53x1_params(struct oxygen *chip, static void set_cs43xx_params(struct oxygen *chip, struct snd_pcm_hw_params *params) { - u8 fm_cs4398, fm_cs4362a; + struct xonar_data *data = chip->model_data; - fm_cs4398 = CS4398_DEM_NONE | CS4398_DIF_LJUST; - fm_cs4362a = CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L; + data->cs4398_fm = CS4398_DEM_NONE | CS4398_DIF_LJUST; + data->cs4362a_fm = CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L; if (params_rate(params) <= 50000) { - fm_cs4398 |= CS4398_FM_SINGLE; - fm_cs4362a |= CS4362A_FM_SINGLE; + data->cs4398_fm |= CS4398_FM_SINGLE; + data->cs4362a_fm |= CS4362A_FM_SINGLE; } else if (params_rate(params) <= 100000) { - fm_cs4398 |= CS4398_FM_DOUBLE; - fm_cs4362a |= CS4362A_FM_DOUBLE; + data->cs4398_fm |= CS4398_FM_DOUBLE; + data->cs4362a_fm |= CS4362A_FM_DOUBLE; } else { - fm_cs4398 |= CS4398_FM_QUAD; - fm_cs4362a |= CS4362A_FM_QUAD; + data->cs4398_fm |= CS4398_FM_QUAD; + data->cs4362a_fm |= CS4362A_FM_QUAD; } - cs4398_write(chip, 2, fm_cs4398); - cs4362a_write(chip, 0x06, fm_cs4362a); - cs4362a_write(chip, 0x09, fm_cs4362a); - cs4362a_write(chip, 0x0c, fm_cs4362a); + cs4398_write(chip, 2, data->cs4398_fm); + cs4362a_write(chip, 0x06, data->cs4362a_fm); + cs4362a_write(chip, 0x09, data->cs4362a_fm); + cs4362a_write(chip, 0x0c, data->cs4362a_fm); } static void update_cs4362a_volumes(struct oxygen *chip) -- cgit v1.2.3 From bbbfb5526650cb9d01c5c230a4e3cbbc18474c41 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 13 May 2008 09:21:48 +0200 Subject: [ALSA] oxygen: simplify DAC volume initialization When initializing the DAC volume registers, we can just use the generic volume update functions instead of setting the registers manually. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- sound/pci/oxygen/hifier.c | 15 +++--- sound/pci/oxygen/oxygen.c | 27 +++++----- sound/pci/oxygen/virtuoso.c | 123 ++++++++++++++++++++------------------------ 3 files changed, 77 insertions(+), 88 deletions(-) diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c index c5d2c86cacb2..0e425d554505 100644 --- a/sound/pci/oxygen/hifier.c +++ b/sound/pci/oxygen/hifier.c @@ -62,6 +62,12 @@ static void ak4396_write(struct oxygen *chip, u8 reg, u8 value) AK4396_WRITE | (reg << 8) | value); } +static void update_ak4396_volume(struct oxygen *chip) +{ + ak4396_write(chip, AK4396_LCH_ATT, chip->dac_volume[0]); + ak4396_write(chip, AK4396_RCH_ATT, chip->dac_volume[1]); +} + static void hifier_init(struct oxygen *chip) { struct hifier_data *data = chip->model_data; @@ -70,8 +76,7 @@ static void hifier_init(struct oxygen *chip) ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN); ak4396_write(chip, AK4396_CONTROL_2, data->ak4396_ctl2); ak4396_write(chip, AK4396_CONTROL_3, AK4396_PCM); - ak4396_write(chip, AK4396_LCH_ATT, 0); - ak4396_write(chip, AK4396_RCH_ATT, 0); + update_ak4396_volume(chip); snd_component_add(chip->card, "AK4396"); snd_component_add(chip->card, "CS5340"); @@ -100,12 +105,6 @@ static void set_ak4396_params(struct oxygen *chip, ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN); } -static void update_ak4396_volume(struct oxygen *chip) -{ - ak4396_write(chip, AK4396_LCH_ATT, chip->dac_volume[0]); - ak4396_write(chip, AK4396_RCH_ATT, chip->dac_volume[1]); -} - static void update_ak4396_mute(struct oxygen *chip) { struct hifier_data *data = chip->model_data; diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c index 8287ac28fe78..ad8d950fddc6 100644 --- a/sound/pci/oxygen/oxygen.c +++ b/sound/pci/oxygen/oxygen.c @@ -112,6 +112,18 @@ static void wm8785_write(struct oxygen *chip, u8 reg, unsigned int value) data->saved_wm8785_registers[reg] = value; } +static void update_ak4396_volume(struct oxygen *chip) +{ + unsigned int i; + + for (i = 0; i < 4; ++i) { + ak4396_write(chip, i, + AK4396_LCH_ATT, chip->dac_volume[i * 2]); + ak4396_write(chip, i, + AK4396_RCH_ATT, chip->dac_volume[i * 2 + 1]); + } +} + static void ak4396_init(struct oxygen *chip) { struct generic_data *data = chip->model_data; @@ -125,9 +137,8 @@ static void ak4396_init(struct oxygen *chip) AK4396_CONTROL_2, data->ak4396_ctl2); ak4396_write(chip, i, AK4396_CONTROL_3, AK4396_PCM); - ak4396_write(chip, i, AK4396_LCH_ATT, 0); - ak4396_write(chip, i, AK4396_RCH_ATT, 0); } + update_ak4396_volume(chip); snd_component_add(chip->card, "AK4396"); } @@ -194,18 +205,6 @@ static void set_ak4396_params(struct oxygen *chip, } } -static void update_ak4396_volume(struct oxygen *chip) -{ - unsigned int i; - - for (i = 0; i < 4; ++i) { - ak4396_write(chip, i, - AK4396_LCH_ATT, chip->dac_volume[i * 2]); - ak4396_write(chip, i, - AK4396_RCH_ATT, chip->dac_volume[i * 2 + 1]); - } -} - static void update_ak4396_mute(struct oxygen *chip) { struct generic_data *data = chip->model_data; diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index 110786b2e3b8..bd9e28583518 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -182,6 +182,28 @@ static void xonar_common_init(struct oxygen *chip) oxygen_set_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit); } +static void update_pcm1796_volume(struct oxygen *chip) +{ + unsigned int i; + + for (i = 0; i < 4; ++i) { + pcm1796_write(chip, i, 16, chip->dac_volume[i * 2]); + pcm1796_write(chip, i, 17, chip->dac_volume[i * 2 + 1]); + } +} + +static void update_pcm1796_mute(struct oxygen *chip) +{ + unsigned int i; + u8 value; + + value = PCM1796_DMF_DISABLED | PCM1796_FMT_24_LJUST | PCM1796_ATLD; + if (chip->dac_mute) + value |= PCM1796_MUTE; + for (i = 0; i < 4; ++i) + pcm1796_write(chip, i, 18, value); +} + static void xonar_d2_init(struct oxygen *chip) { struct xonar_data *data = chip->model_data; @@ -192,14 +214,12 @@ static void xonar_d2_init(struct oxygen *chip) data->pcm1796_oversampling = PCM1796_OS_64; for (i = 0; i < 4; ++i) { - pcm1796_write(chip, i, 18, PCM1796_MUTE | PCM1796_DMF_DISABLED | - PCM1796_FMT_24_LJUST | PCM1796_ATLD); pcm1796_write(chip, i, 19, PCM1796_FLT_SHARP | PCM1796_ATS_1); pcm1796_write(chip, i, 20, data->pcm1796_oversampling); pcm1796_write(chip, i, 21, 0); - pcm1796_write(chip, i, 16, 0x0f); /* set ATL/ATR after ATLD */ - pcm1796_write(chip, i, 17, 0x0f); } + update_pcm1796_mute(chip); /* set ATLD before ATL/ATR */ + update_pcm1796_volume(chip); oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_D2_ALT); oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, GPIO_D2_ALT); @@ -221,6 +241,37 @@ static void xonar_d2x_init(struct oxygen *chip) xonar_d2_init(chip); } +static void update_cs4362a_volumes(struct oxygen *chip) +{ + u8 mute; + + mute = chip->dac_mute ? CS4362A_MUTE : 0; + cs4362a_write(chip, 7, (127 - chip->dac_volume[2]) | mute); + cs4362a_write(chip, 8, (127 - chip->dac_volume[3]) | mute); + cs4362a_write(chip, 10, (127 - chip->dac_volume[4]) | mute); + cs4362a_write(chip, 11, (127 - chip->dac_volume[5]) | mute); + cs4362a_write(chip, 13, (127 - chip->dac_volume[6]) | mute); + cs4362a_write(chip, 14, (127 - chip->dac_volume[7]) | mute); +} + +static void update_cs43xx_volume(struct oxygen *chip) +{ + cs4398_write(chip, 5, (127 - chip->dac_volume[0]) * 2); + cs4398_write(chip, 6, (127 - chip->dac_volume[1]) * 2); + update_cs4362a_volumes(chip); +} + +static void update_cs43xx_mute(struct oxygen *chip) +{ + u8 reg; + + reg = CS4398_MUTEP_LOW | CS4398_PAMUTE; + if (chip->dac_mute) + reg |= CS4398_MUTE_B | CS4398_MUTE_A; + cs4398_write(chip, 4, reg); + update_cs4362a_volumes(chip); +} + static void xonar_dx_init(struct oxygen *chip) { struct xonar_data *data = chip->model_data; @@ -245,9 +296,6 @@ static void xonar_dx_init(struct oxygen *chip) /* configure */ cs4398_write(chip, 2, data->cs4398_fm); cs4398_write(chip, 3, CS4398_ATAPI_B_R | CS4398_ATAPI_A_L); - cs4398_write(chip, 4, CS4398_MUTEP_LOW | CS4398_PAMUTE); - cs4398_write(chip, 5, 0xfe); - cs4398_write(chip, 6, 0xfe); cs4398_write(chip, 7, CS4398_RMP_DN | CS4398_RMP_UP | CS4398_ZERO_CROSS | CS4398_SOFT_RAMP); cs4362a_write(chip, 0x02, CS4362A_DIF_LJUST); @@ -256,14 +304,10 @@ static void xonar_dx_init(struct oxygen *chip) cs4362a_write(chip, 0x04, CS4362A_RMP_DN | CS4362A_DEM_NONE); cs4362a_write(chip, 0x05, 0); cs4362a_write(chip, 0x06, data->cs4362a_fm); - cs4362a_write(chip, 0x07, 0x7f | CS4362A_MUTE); - cs4362a_write(chip, 0x08, 0x7f | CS4362A_MUTE); cs4362a_write(chip, 0x09, data->cs4362a_fm); - cs4362a_write(chip, 0x0a, 0x7f | CS4362A_MUTE); - cs4362a_write(chip, 0x0b, 0x7f | CS4362A_MUTE); cs4362a_write(chip, 0x0c, data->cs4362a_fm); - cs4362a_write(chip, 0x0d, 0x7f | CS4362A_MUTE); - cs4362a_write(chip, 0x0e, 0x7f | CS4362A_MUTE); + update_cs43xx_volume(chip); + update_cs43xx_mute(chip); /* clear power down */ cs4398_write(chip, 8, CS4398_CPEN); cs4362a_write(chip, 0x01, CS4362A_CPEN); @@ -306,28 +350,6 @@ static void set_pcm1796_params(struct oxygen *chip, pcm1796_write(chip, i, 20, data->pcm1796_oversampling); } -static void update_pcm1796_volume(struct oxygen *chip) -{ - unsigned int i; - - for (i = 0; i < 4; ++i) { - pcm1796_write(chip, i, 16, chip->dac_volume[i * 2]); - pcm1796_write(chip, i, 17, chip->dac_volume[i * 2 + 1]); - } -} - -static void update_pcm1796_mute(struct oxygen *chip) -{ - unsigned int i; - u8 value; - - value = PCM1796_FMT_24_LJUST | PCM1796_ATLD; - if (chip->dac_mute) - value |= PCM1796_MUTE; - for (i = 0; i < 4; ++i) - pcm1796_write(chip, i, 18, value); -} - static void set_cs53x1_params(struct oxygen *chip, struct snd_pcm_hw_params *params) { @@ -366,37 +388,6 @@ static void set_cs43xx_params(struct oxygen *chip, cs4362a_write(chip, 0x0c, data->cs4362a_fm); } -static void update_cs4362a_volumes(struct oxygen *chip) -{ - u8 mute; - - mute = chip->dac_mute ? CS4362A_MUTE : 0; - cs4362a_write(chip, 7, (127 - chip->dac_volume[2]) | mute); - cs4362a_write(chip, 8, (127 - chip->dac_volume[3]) | mute); - cs4362a_write(chip, 10, (127 - chip->dac_volume[4]) | mute); - cs4362a_write(chip, 11, (127 - chip->dac_volume[5]) | mute); - cs4362a_write(chip, 13, (127 - chip->dac_volume[6]) | mute); - cs4362a_write(chip, 14, (127 - chip->dac_volume[7]) | mute); -} - -static void update_cs43xx_volume(struct oxygen *chip) -{ - cs4398_write(chip, 5, (127 - chip->dac_volume[0]) * 2); - cs4398_write(chip, 6, (127 - chip->dac_volume[1]) * 2); - update_cs4362a_volumes(chip); -} - -static void update_cs43xx_mute(struct oxygen *chip) -{ - u8 reg; - - reg = CS4398_MUTEP_LOW | CS4398_PAMUTE; - if (chip->dac_mute) - reg |= CS4398_MUTE_B | CS4398_MUTE_A; - cs4398_write(chip, 4, reg); - update_cs4362a_volumes(chip); -} - static void xonar_gpio_changed(struct oxygen *chip) { struct xonar_data *data = chip->model_data; -- cgit v1.2.3 From 75146fc0f9368ea41419792ac8bfdd19273b4473 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 13 May 2008 09:22:43 +0200 Subject: [ALSA] oxygen: separate out hardware initialization code Create separate functions for the code that initializes the hardware, as opposed to initializing internal driver state, so that they can be reused for resume support. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- sound/pci/oxygen/hifier.c | 11 +++++++-- sound/pci/oxygen/oxygen.c | 26 ++++++++++++++++------ sound/pci/oxygen/virtuoso.c | 54 ++++++++++++++++++++++++++++----------------- 3 files changed, 62 insertions(+), 29 deletions(-) diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c index 0e425d554505..6e45a58ad14b 100644 --- a/sound/pci/oxygen/hifier.c +++ b/sound/pci/oxygen/hifier.c @@ -68,15 +68,22 @@ static void update_ak4396_volume(struct oxygen *chip) ak4396_write(chip, AK4396_RCH_ATT, chip->dac_volume[1]); } -static void hifier_init(struct oxygen *chip) +static void hifier_registers_init(struct oxygen *chip) { struct hifier_data *data = chip->model_data; - data->ak4396_ctl2 = AK4396_SMUTE | AK4396_DEM_OFF | AK4396_DFS_NORMAL; ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN); ak4396_write(chip, AK4396_CONTROL_2, data->ak4396_ctl2); ak4396_write(chip, AK4396_CONTROL_3, AK4396_PCM); update_ak4396_volume(chip); +} + +static void hifier_init(struct oxygen *chip) +{ + struct hifier_data *data = chip->model_data; + + data->ak4396_ctl2 = AK4396_SMUTE | AK4396_DEM_OFF | AK4396_DFS_NORMAL; + hifier_registers_init(chip); snd_component_add(chip->card, "AK4396"); snd_component_add(chip->card, "CS5340"); diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c index ad8d950fddc6..800ae304a247 100644 --- a/sound/pci/oxygen/oxygen.c +++ b/sound/pci/oxygen/oxygen.c @@ -124,12 +124,11 @@ static void update_ak4396_volume(struct oxygen *chip) } } -static void ak4396_init(struct oxygen *chip) +static void ak4396_registers_init(struct oxygen *chip) { struct generic_data *data = chip->model_data; unsigned int i; - data->ak4396_ctl2 = AK4396_SMUTE | AK4396_DEM_OFF | AK4396_DFS_NORMAL; for (i = 0; i < 4; ++i) { ak4396_write(chip, i, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN); @@ -139,6 +138,14 @@ static void ak4396_init(struct oxygen *chip) AK4396_CONTROL_3, AK4396_PCM); } update_ak4396_volume(chip); +} + +static void ak4396_init(struct oxygen *chip) +{ + struct generic_data *data = chip->model_data; + + data->ak4396_ctl2 = AK4396_SMUTE | AK4396_DEM_OFF | AK4396_DFS_NORMAL; + ak4396_registers_init(chip); snd_component_add(chip->card, "AK4396"); } @@ -149,18 +156,23 @@ static void ak5385_init(struct oxygen *chip) snd_component_add(chip->card, "AK5385"); } -static void wm8785_init(struct oxygen *chip) +static void wm8785_registers_init(struct oxygen *chip) { struct generic_data *data = chip->model_data; - data->saved_wm8785_registers[0] = WM8785_MCR_SLAVE | - WM8785_OSR_SINGLE | WM8785_FORMAT_LJUST; - data->saved_wm8785_registers[1] = WM8785_WL_24; - wm8785_write(chip, WM8785_R7, 0); wm8785_write(chip, WM8785_R0, data->saved_wm8785_registers[0]); wm8785_write(chip, WM8785_R1, data->saved_wm8785_registers[1]); +} +static void wm8785_init(struct oxygen *chip) +{ + struct generic_data *data = chip->model_data; + + data->saved_wm8785_registers[0] = WM8785_MCR_SLAVE | + WM8785_OSR_SINGLE | WM8785_FORMAT_LJUST; + data->saved_wm8785_registers[1] = WM8785_WL_24; + wm8785_registers_init(chip); snd_component_add(chip->card, "WM8785"); } diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index bd9e28583518..e95dc5717ed7 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -204,15 +204,11 @@ static void update_pcm1796_mute(struct oxygen *chip) pcm1796_write(chip, i, 18, value); } -static void xonar_d2_init(struct oxygen *chip) +static void pcm1796_init(struct oxygen *chip) { struct xonar_data *data = chip->model_data; unsigned int i; - data->anti_pop_delay = 300; - data->output_enable_bit = GPIO_D2_OUTPUT_ENABLE; - data->pcm1796_oversampling = PCM1796_OS_64; - for (i = 0; i < 4; ++i) { pcm1796_write(chip, i, 19, PCM1796_FLT_SHARP | PCM1796_ATS_1); pcm1796_write(chip, i, 20, data->pcm1796_oversampling); @@ -220,6 +216,17 @@ static void xonar_d2_init(struct oxygen *chip) } update_pcm1796_mute(chip); /* set ATLD before ATL/ATR */ update_pcm1796_volume(chip); +} + +static void xonar_d2_init(struct oxygen *chip) +{ + struct xonar_data *data = chip->model_data; + + data->anti_pop_delay = 300; + data->output_enable_bit = GPIO_D2_OUTPUT_ENABLE; + data->pcm1796_oversampling = PCM1796_OS_64; + + pcm1796_init(chip); oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_D2_ALT); oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, GPIO_D2_ALT); @@ -272,24 +279,10 @@ static void update_cs43xx_mute(struct oxygen *chip) update_cs4362a_volumes(chip); } -static void xonar_dx_init(struct oxygen *chip) +static void cs43xx_init(struct oxygen *chip) { struct xonar_data *data = chip->model_data; - data->anti_pop_delay = 800; - data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE; - data->ext_power_reg = OXYGEN_GPI_DATA; - data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK; - data->ext_power_bit = GPI_DX_EXT_POWER; - data->cs4398_fm = CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST; - data->cs4362a_fm = CS4362A_FM_SINGLE | - CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L; - - oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS, - OXYGEN_2WIRE_LENGTH_8 | - OXYGEN_2WIRE_INTERRUPT_MASK | - OXYGEN_2WIRE_SPEED_FAST); - /* set CPEN (control port mode) and power down */ cs4398_write(chip, 8, CS4398_CPEN | CS4398_PDN); cs4362a_write(chip, 0x01, CS4362A_PDN | CS4362A_CPEN); @@ -311,6 +304,27 @@ static void xonar_dx_init(struct oxygen *chip) /* clear power down */ cs4398_write(chip, 8, CS4398_CPEN); cs4362a_write(chip, 0x01, CS4362A_CPEN); +} + +static void xonar_dx_init(struct oxygen *chip) +{ + struct xonar_data *data = chip->model_data; + + data->anti_pop_delay = 800; + data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE; + data->ext_power_reg = OXYGEN_GPI_DATA; + data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK; + data->ext_power_bit = GPI_DX_EXT_POWER; + data->cs4398_fm = CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST; + data->cs4362a_fm = CS4362A_FM_SINGLE | + CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L; + + oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS, + OXYGEN_2WIRE_LENGTH_8 | + OXYGEN_2WIRE_INTERRUPT_MASK | + OXYGEN_2WIRE_SPEED_FAST); + + cs43xx_init(chip); oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_DX_FRONT_PANEL | GPIO_DX_INPUT_ROUTE); -- cgit v1.2.3 From 92215f3a178080bd9d7c65879499e9474e54d55c Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 13 May 2008 09:23:02 +0200 Subject: [ALSA] virtuoso: add xonar_enable_output() Move the setting of the output enable GPIO bit to a separate function. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- sound/pci/oxygen/virtuoso.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index e95dc5717ed7..abd5313d19b5 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -162,6 +162,14 @@ static void cs4362a_write(struct oxygen *chip, u8 reg, u8 value) oxygen_write_i2c(chip, I2C_DEVICE_CS4362A, reg, value); } +static void xonar_enable_output(struct oxygen *chip) +{ + struct xonar_data *data = chip->model_data; + + msleep(data->anti_pop_delay); + oxygen_set_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit); +} + static void xonar_common_init(struct oxygen *chip) { struct xonar_data *data = chip->model_data; @@ -173,13 +181,12 @@ static void xonar_common_init(struct oxygen *chip) data->has_power = !!(oxygen_read8(chip, data->ext_power_reg) & data->ext_power_bit); } - oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_CS53x1_M_MASK); + oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, + GPIO_CS53x1_M_MASK | data->output_enable_bit); oxygen_write16_masked(chip, OXYGEN_GPIO_DATA, GPIO_CS53x1_M_SINGLE, GPIO_CS53x1_M_MASK); oxygen_ac97_set_bits(chip, 0, CM9780_JACK, CM9780_FMIC2MIC); - msleep(data->anti_pop_delay); - oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, data->output_enable_bit); - oxygen_set_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit); + xonar_enable_output(chip); } static void update_pcm1796_volume(struct oxygen *chip) -- cgit v1.2.3 From 4a4bc53bc52978dd6c918531921da925fd047d95 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 13 May 2008 09:24:39 +0200 Subject: [ALSA] oxygen: add PM support Add suspend/resume support. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- sound/pci/oxygen/hifier.c | 5 +++ sound/pci/oxygen/oxygen.c | 12 +++++ sound/pci/oxygen/oxygen.h | 6 +++ sound/pci/oxygen/oxygen_lib.c | 100 ++++++++++++++++++++++++++++++++++++++++++ sound/pci/oxygen/oxygen_pcm.c | 1 + sound/pci/oxygen/virtuoso.c | 22 ++++++++++ 6 files changed, 146 insertions(+) diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c index 6e45a58ad14b..7442460583dd 100644 --- a/sound/pci/oxygen/hifier.c +++ b/sound/pci/oxygen/hifier.c @@ -146,6 +146,7 @@ static const struct oxygen_model model_hifier = { .init = hifier_init, .control_filter = hifier_control_filter, .cleanup = hifier_cleanup, + .resume = hifier_registers_init, .set_dac_params = set_ak4396_params, .set_adc_params = set_cs5340_params, .update_dac_volume = update_ak4396_volume, @@ -186,6 +187,10 @@ static struct pci_driver hifier_driver = { .id_table = hifier_ids, .probe = hifier_probe, .remove = __devexit_p(oxygen_pci_remove), +#ifdef CONFIG_PM + .suspend = oxygen_pci_suspend, + .resume = oxygen_pci_resume, +#endif }; static int __init alsa_card_hifier_init(void) diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c index 800ae304a247..7c8ae31eb468 100644 --- a/sound/pci/oxygen/oxygen.c +++ b/sound/pci/oxygen/oxygen.c @@ -192,6 +192,12 @@ static void generic_cleanup(struct oxygen *chip) { } +static void generic_resume(struct oxygen *chip) +{ + ak4396_registers_init(chip); + wm8785_registers_init(chip); +} + static void set_ak4396_params(struct oxygen *chip, struct snd_pcm_hw_params *params) { @@ -278,6 +284,7 @@ static const struct oxygen_model model_generic = { .owner = THIS_MODULE, .init = generic_init, .cleanup = generic_cleanup, + .resume = generic_resume, .set_dac_params = set_ak4396_params, .set_adc_params = set_wm8785_params, .update_dac_volume = update_ak4396_volume, @@ -305,6 +312,7 @@ static const struct oxygen_model model_meridian = { .owner = THIS_MODULE, .init = meridian_init, .cleanup = generic_cleanup, + .resume = ak4396_registers_init, .set_dac_params = set_ak4396_params, .set_adc_params = set_ak5385_params, .update_dac_volume = update_ak4396_volume, @@ -353,6 +361,10 @@ static struct pci_driver oxygen_driver = { .id_table = oxygen_ids, .probe = generic_oxygen_probe, .remove = __devexit_p(oxygen_pci_remove), +#ifdef CONFIG_PM + .suspend = oxygen_pci_suspend, + .resume = oxygen_pci_resume, +#endif }; static int __init alsa_card_oxygen_init(void) diff --git a/sound/pci/oxygen/oxygen.h b/sound/pci/oxygen/oxygen.h index 29c9fa4964b2..74a644880074 100644 --- a/sound/pci/oxygen/oxygen.h +++ b/sound/pci/oxygen/oxygen.h @@ -97,6 +97,8 @@ struct oxygen_model { int (*control_filter)(struct snd_kcontrol_new *template); int (*mixer_init)(struct oxygen *chip); void (*cleanup)(struct oxygen *chip); + void (*suspend)(struct oxygen *chip); + void (*resume)(struct oxygen *chip); void (*pcm_hardware_filter)(unsigned int channel, struct snd_pcm_hardware *hardware); void (*set_dac_params)(struct oxygen *chip, @@ -125,6 +127,10 @@ struct oxygen_model { int oxygen_pci_probe(struct pci_dev *pci, int index, char *id, const struct oxygen_model *model); void oxygen_pci_remove(struct pci_dev *pci); +#ifdef CONFIG_PM +int oxygen_pci_suspend(struct pci_dev *pci, pm_message_t state); +int oxygen_pci_resume(struct pci_dev *pci); +#endif /* oxygen_mixer.c */ diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c index 60bc15917349..22f37851045e 100644 --- a/sound/pci/oxygen/oxygen_lib.c +++ b/sound/pci/oxygen/oxygen_lib.c @@ -314,6 +314,10 @@ static void oxygen_init(struct oxygen *chip) OXYGEN_SPDIF_LOCK_MASK | OXYGEN_SPDIF_RATE_MASK); oxygen_write32(chip, OXYGEN_SPDIF_OUTPUT_BITS, chip->spdif_bits); + oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS, + OXYGEN_2WIRE_LENGTH_8 | + OXYGEN_2WIRE_INTERRUPT_MASK | + OXYGEN_2WIRE_SPEED_STANDARD); oxygen_clear_bits8(chip, OXYGEN_MPU401_CONTROL, OXYGEN_MPU401_LOOPBACK); oxygen_write8(chip, OXYGEN_GPI_INTERRUPT_MASK, 0); oxygen_write16(chip, OXYGEN_GPIO_INTERRUPT_MASK, 0); @@ -534,3 +538,99 @@ void oxygen_pci_remove(struct pci_dev *pci) pci_set_drvdata(pci, NULL); } EXPORT_SYMBOL(oxygen_pci_remove); + +#ifdef CONFIG_PM +int oxygen_pci_suspend(struct pci_dev *pci, pm_message_t state) +{ + struct snd_card *card = pci_get_drvdata(pci); + struct oxygen *chip = card->private_data; + unsigned int i, saved_interrupt_mask; + + snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); + + for (i = 0; i < PCM_COUNT; ++i) + if (chip->streams[i]) + snd_pcm_suspend(chip->streams[i]); + + if (chip->model->suspend) + chip->model->suspend(chip); + + spin_lock_irq(&chip->reg_lock); + saved_interrupt_mask = chip->interrupt_mask; + chip->interrupt_mask = 0; + oxygen_write16(chip, OXYGEN_DMA_STATUS, 0); + oxygen_write16(chip, OXYGEN_INTERRUPT_MASK, 0); + spin_unlock_irq(&chip->reg_lock); + + synchronize_irq(chip->irq); + flush_scheduled_work(); + chip->interrupt_mask = saved_interrupt_mask; + + pci_disable_device(pci); + pci_save_state(pci); + pci_set_power_state(pci, pci_choose_state(pci, state)); + return 0; +} +EXPORT_SYMBOL(oxygen_pci_suspend); + +static const u32 registers_to_restore[OXYGEN_IO_SIZE / 32] = { + 0xffffffff, 0x00ff077f, 0x00011d08, 0x007f00ff, + 0x00300000, 0x00000fe4, 0x0ff7001f, 0x00000000 +}; +static const u32 ac97_registers_to_restore[2][0x40 / 32] = { + { 0x18284fa2, 0x03060000 }, + { 0x00007fa6, 0x00200000 } +}; + +static inline int is_bit_set(const u32 *bitmap, unsigned int bit) +{ + return bitmap[bit / 32] & (1 << (bit & 31)); +} + +static void oxygen_restore_ac97(struct oxygen *chip, unsigned int codec) +{ + unsigned int i; + + oxygen_write_ac97(chip, codec, AC97_RESET, 0); + msleep(1); + for (i = 1; i < 0x40; ++i) + if (is_bit_set(ac97_registers_to_restore[codec], i)) + oxygen_write_ac97(chip, codec, i * 2, + chip->saved_ac97_registers[codec][i]); +} + +int oxygen_pci_resume(struct pci_dev *pci) +{ + struct snd_card *card = pci_get_drvdata(pci); + struct oxygen *chip = card->private_data; + unsigned int i; + + pci_set_power_state(pci, PCI_D0); + pci_restore_state(pci); + if (pci_enable_device(pci) < 0) { + snd_printk(KERN_ERR "cannot reenable device"); + snd_card_disconnect(card); + return -EIO; + } + pci_set_master(pci); + + oxygen_write16(chip, OXYGEN_DMA_STATUS, 0); + oxygen_write16(chip, OXYGEN_INTERRUPT_MASK, 0); + for (i = 0; i < OXYGEN_IO_SIZE; ++i) + if (is_bit_set(registers_to_restore, i)) + oxygen_write8(chip, i, chip->saved_registers._8[i]); + if (chip->has_ac97_0) + oxygen_restore_ac97(chip, 0); + if (chip->has_ac97_1) + oxygen_restore_ac97(chip, 1); + + if (chip->model->resume) + chip->model->resume(chip); + + oxygen_write16(chip, OXYGEN_INTERRUPT_MASK, chip->interrupt_mask); + + snd_power_change_state(card, SNDRV_CTL_POWER_D0); + return 0; +} +EXPORT_SYMBOL(oxygen_pci_resume); +#endif /* CONFIG_PM */ diff --git a/sound/pci/oxygen/oxygen_pcm.c b/sound/pci/oxygen/oxygen_pcm.c index b17c405e069d..9680aa35f81f 100644 --- a/sound/pci/oxygen/oxygen_pcm.c +++ b/sound/pci/oxygen/oxygen_pcm.c @@ -517,6 +517,7 @@ static int oxygen_trigger(struct snd_pcm_substream *substream, int cmd) switch (cmd) { case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_SUSPEND: pausing = 0; break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index abd5313d19b5..9a2c16bf94e0 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -359,6 +359,18 @@ static void xonar_dx_cleanup(struct oxygen *chip) oxygen_clear_bits8(chip, OXYGEN_FUNCTION, OXYGEN_FUNCTION_RESET_CODEC); } +static void xonar_d2_resume(struct oxygen *chip) +{ + pcm1796_init(chip); + xonar_enable_output(chip); +} + +static void xonar_dx_resume(struct oxygen *chip) +{ + cs43xx_init(chip); + xonar_enable_output(chip); +} + static void set_pcm1796_params(struct oxygen *chip, struct snd_pcm_hw_params *params) { @@ -551,6 +563,8 @@ static const struct oxygen_model xonar_models[] = { .control_filter = xonar_d2_control_filter, .mixer_init = xonar_mixer_init, .cleanup = xonar_cleanup, + .suspend = xonar_cleanup, + .resume = xonar_d2_resume, .set_dac_params = set_pcm1796_params, .set_adc_params = set_cs53x1_params, .update_dac_volume = update_pcm1796_volume, @@ -579,6 +593,8 @@ static const struct oxygen_model xonar_models[] = { .control_filter = xonar_d2_control_filter, .mixer_init = xonar_mixer_init, .cleanup = xonar_cleanup, + .suspend = xonar_cleanup, + .resume = xonar_d2_resume, .set_dac_params = set_pcm1796_params, .set_adc_params = set_cs53x1_params, .update_dac_volume = update_pcm1796_volume, @@ -608,6 +624,8 @@ static const struct oxygen_model xonar_models[] = { .control_filter = xonar_dx_control_filter, .mixer_init = xonar_dx_mixer_init, .cleanup = xonar_dx_cleanup, + .suspend = xonar_dx_cleanup, + .resume = xonar_dx_resume, .set_dac_params = set_cs43xx_params, .set_adc_params = set_cs53x1_params, .update_dac_volume = update_cs43xx_volume, @@ -652,6 +670,10 @@ static struct pci_driver xonar_driver = { .id_table = xonar_ids, .probe = xonar_probe, .remove = __devexit_p(oxygen_pci_remove), +#ifdef CONFIG_PM + .suspend = oxygen_pci_suspend, + .resume = oxygen_pci_resume, +#endif }; static int __init alsa_card_xonar_init(void) -- cgit v1.2.3 From d55d7a1cbbd069f8368ec5c67480d319e7b227b9 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 13 May 2008 09:25:39 +0200 Subject: [ALSA] oxygen: add symbols for buffer/period size constraints Introduce symbols for the buffer/period size constraints so that their limits and relationships become clearer. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- sound/pci/oxygen/oxygen_pcm.c | 46 ++++++++++++++++++++++++++++--------------- 1 file changed, 30 insertions(+), 16 deletions(-) diff --git a/sound/pci/oxygen/oxygen_pcm.c b/sound/pci/oxygen/oxygen_pcm.c index 9680aa35f81f..09a16e459de9 100644 --- a/sound/pci/oxygen/oxygen_pcm.c +++ b/sound/pci/oxygen/oxygen_pcm.c @@ -24,6 +24,16 @@ #include #include "oxygen.h" +/* most DMA channels have a 16-bit counter for 32-bit words */ +#define BUFFER_BYTES_MAX ((1 << 16) * 4) +/* the multichannel DMA channel has a 24-bit counter */ +#define BUFFER_BYTES_MAX_MULTICH ((1 << 24) * 4) + +#define PERIOD_BYTES_MIN 64 + +#define DEFAULT_BUFFER_BYTES (BUFFER_BYTES_MAX / 2) +#define DEFAULT_BUFFER_BYTES_MULTICH (1024 * 1024) + static const struct snd_pcm_hardware oxygen_stereo_hardware = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | @@ -44,11 +54,11 @@ static const struct snd_pcm_hardware oxygen_stereo_hardware = { .rate_max = 192000, .channels_min = 2, .channels_max = 2, - .buffer_bytes_max = 256 * 1024, - .period_bytes_min = 128, - .period_bytes_max = 128 * 1024, + .buffer_bytes_max = BUFFER_BYTES_MAX, + .period_bytes_min = PERIOD_BYTES_MIN, + .period_bytes_max = BUFFER_BYTES_MAX / 2, .periods_min = 2, - .periods_max = 2048, + .periods_max = BUFFER_BYTES_MAX / PERIOD_BYTES_MIN, }; static const struct snd_pcm_hardware oxygen_multichannel_hardware = { .info = SNDRV_PCM_INFO_MMAP | @@ -70,11 +80,11 @@ static const struct snd_pcm_hardware oxygen_multichannel_hardware = { .rate_max = 192000, .channels_min = 2, .channels_max = 8, - .buffer_bytes_max = 2048 * 1024, - .period_bytes_min = 128, - .period_bytes_max = 256 * 1024, + .buffer_bytes_max = BUFFER_BYTES_MAX_MULTICH, + .period_bytes_min = PERIOD_BYTES_MIN, + .period_bytes_max = BUFFER_BYTES_MAX_MULTICH / 2, .periods_min = 2, - .periods_max = 16384, + .periods_max = BUFFER_BYTES_MAX_MULTICH / PERIOD_BYTES_MIN, }; static const struct snd_pcm_hardware oxygen_ac97_hardware = { .info = SNDRV_PCM_INFO_MMAP | @@ -88,11 +98,11 @@ static const struct snd_pcm_hardware oxygen_ac97_hardware = { .rate_max = 48000, .channels_min = 2, .channels_max = 2, - .buffer_bytes_max = 256 * 1024, - .period_bytes_min = 128, - .period_bytes_max = 128 * 1024, + .buffer_bytes_max = BUFFER_BYTES_MAX, + .period_bytes_min = PERIOD_BYTES_MIN, + .period_bytes_max = BUFFER_BYTES_MAX / 2, .periods_min = 2, - .periods_max = 2048, + .periods_max = BUFFER_BYTES_MAX / PERIOD_BYTES_MIN, }; static const struct snd_pcm_hardware *const oxygen_hardware[PCM_COUNT] = { @@ -664,12 +674,14 @@ int oxygen_pcm_init(struct oxygen *chip) snd_pcm_lib_preallocate_pages(pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream, SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci), - 512 * 1024, 2048 * 1024); + DEFAULT_BUFFER_BYTES_MULTICH, + BUFFER_BYTES_MAX_MULTICH); if (ins) snd_pcm_lib_preallocate_pages(pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream, SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci), - 128 * 1024, 256 * 1024); + DEFAULT_BUFFER_BYTES, + BUFFER_BYTES_MAX); } outs = !!(chip->model->pcm_dev_cfg & PLAYBACK_1_TO_SPDIF); @@ -689,7 +701,8 @@ int oxygen_pcm_init(struct oxygen *chip) strcpy(pcm->name, "Digital"); snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci), - 128 * 1024, 256 * 1024); + DEFAULT_BUFFER_BYTES, + BUFFER_BYTES_MAX); } if (chip->has_ac97_1) { @@ -719,7 +732,8 @@ int oxygen_pcm_init(struct oxygen *chip) strcpy(pcm->name, outs ? "Front Panel" : "Analog 2"); snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(chip->pci), - 128 * 1024, 256 * 1024); + DEFAULT_BUFFER_BYTES, + BUFFER_BYTES_MAX); } return 0; } -- cgit v1.2.3 From ca1f30ad6c3f002d1d9b9355a53b8bbf2fe70588 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 13 May 2008 09:26:01 +0200 Subject: [ALSA] virtuoso: restrict period time to less than 10 s Add a constraint for the period time so that there are less than ten seconds between interrupts so that ALSA does not assume that the device is dead. Signed-off-by: Clemens Ladisch Signed-off-by: Jaroslav Kysela --- sound/pci/oxygen/oxygen_pcm.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/oxygen/oxygen_pcm.c b/sound/pci/oxygen/oxygen_pcm.c index 09a16e459de9..c4ad65a3406f 100644 --- a/sound/pci/oxygen/oxygen_pcm.c +++ b/sound/pci/oxygen/oxygen_pcm.c @@ -165,6 +165,12 @@ static int oxygen_open(struct snd_pcm_substream *substream, if (err < 0) return err; } + if (channel == PCM_MULTICH) { + err = snd_pcm_hw_constraint_minmax + (runtime, SNDRV_PCM_HW_PARAM_PERIOD_TIME, 0, 8192000); + if (err < 0) + return err; + } snd_pcm_set_sync(substream); chip->streams[channel] = substream; -- cgit v1.2.3 From 4ba1327ab8ce179c40862f3dedb4ebaaa491d737 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 13 May 2008 14:51:19 +0200 Subject: [ALSA] soc - DAPM - Add bulk control registration Most SoC drivers cut'n'paste a loop iterating over an array to register their DAPM controls. Provide a function they can call instead. Signed-off-by: Mark Brown Cc: Graeme Gregory Cc: Frank Mandarino Cc: Jarkko Nikula Cc: Richard Purdie Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/soc-dapm.h | 3 +++ sound/soc/soc-dapm.c | 27 +++++++++++++++++++++++++++ 2 files changed, 30 insertions(+) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 40cc695b69b6..1f30616afe71 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -205,6 +205,9 @@ int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); int snd_soc_dapm_new_control(struct snd_soc_codec *codec, const struct snd_soc_dapm_widget *widget); +int snd_soc_dapm_new_controls(struct snd_soc_codec *codec, + const struct snd_soc_dapm_widget *widget, + int num); /* dapm path setup */ int snd_soc_dapm_connect_input(struct snd_soc_codec *codec, diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index c60200ccde60..811d65271012 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1233,6 +1233,33 @@ int snd_soc_dapm_new_control(struct snd_soc_codec *codec, } EXPORT_SYMBOL_GPL(snd_soc_dapm_new_control); +/** + * snd_soc_dapm_new_controls - create new dapm controls + * @codec: audio codec + * @widget: widget array + * @num: number of widgets + * + * Creates new DAPM controls based upon the templates. + * + * Returns 0 for success else error. + */ +int snd_soc_dapm_new_controls(struct snd_soc_codec *codec, + const struct snd_soc_dapm_widget *widget, + int num) +{ + int i, ret; + + for (i = 0; i < num; i++) { + ret = snd_soc_dapm_new_control(codec, widget); + if (ret < 0) + return ret; + widget++; + } + return 0; +} +EXPORT_SYMBOL_GPL(snd_soc_dapm_new_controls); + + /** * snd_soc_dapm_stream_event - send a stream event to the dapm core * @codec: audio codec -- cgit v1.2.3 From 105f1c28442301237d20b05a3d52d9987614016f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 13 May 2008 14:52:19 +0200 Subject: [ALSA] soc - DAPM - Bulk route registration ASoC codecs and machine drivers that use DAPM routes all cut'n'paste a loop iterating over a null terminated array of routes. Factor out this into a bulk registration function, improving the error reporting for most users, and deprecate the old API to help out of tree users pick up the changes. Signed-off-by: Mark Brown Cc: Graeme Gregory Cc: Frank Mandarino Cc: Jarkko Nikula Cc: Richard Purdie Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/soc-dapm.h | 17 +++++++++++- sound/soc/soc-dapm.c | 72 ++++++++++++++++++++++++++++++++++++++---------- 2 files changed, 73 insertions(+), 16 deletions(-) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 1f30616afe71..bf4cf0c1d37f 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -193,6 +193,7 @@ struct snd_soc_dapm_widget; enum snd_soc_dapm_type; struct snd_soc_dapm_path; struct snd_soc_dapm_pin; +struct snd_soc_dapm_route; /* dapm controls */ int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol, @@ -210,10 +211,12 @@ int snd_soc_dapm_new_controls(struct snd_soc_codec *codec, int num); /* dapm path setup */ -int snd_soc_dapm_connect_input(struct snd_soc_codec *codec, +int __deprecated snd_soc_dapm_connect_input(struct snd_soc_codec *codec, const char *sink_name, const char *control_name, const char *src_name); int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec); void snd_soc_dapm_free(struct snd_soc_device *socdev); +int snd_soc_dapm_add_routes(struct snd_soc_codec *codec, + const struct snd_soc_dapm_route *route, int num); /* dapm events */ int snd_soc_dapm_stream_event(struct snd_soc_codec *codec, char *stream, @@ -250,6 +253,18 @@ enum snd_soc_dapm_type { snd_soc_dapm_post, /* machine specific post widget - exec last */ }; +/* + * DAPM audio route definition. + * + * Defines an audio route originating at source via control and finishing + * at sink. + */ +struct snd_soc_dapm_route { + const char *sink; + const char *control; + const char *source; +}; + /* dapm audio path between two widgets */ struct snd_soc_dapm_path { char *name; diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 811d65271012..1ef6d94b8357 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -841,21 +841,8 @@ int snd_soc_dapm_sync_endpoints(struct snd_soc_codec *codec) } EXPORT_SYMBOL_GPL(snd_soc_dapm_sync_endpoints); -/** - * snd_soc_dapm_connect_input - connect dapm widgets - * @codec: audio codec - * @sink: name of target widget - * @control: mixer control name - * @source: name of source name - * - * Connects 2 dapm widgets together via a named audio path. The sink is - * the widget receiving the audio signal, whilst the source is the sender - * of the audio signal. - * - * Returns 0 for success else error. - */ -int snd_soc_dapm_connect_input(struct snd_soc_codec *codec, const char *sink, - const char * control, const char *source) +static int snd_soc_dapm_add_route(struct snd_soc_codec *codec, + const char *sink, const char *control, const char *source) { struct snd_soc_dapm_path *path; struct snd_soc_dapm_widget *wsource = NULL, *wsink = NULL, *w; @@ -957,8 +944,63 @@ err: kfree(path); return ret; } + +/** + * snd_soc_dapm_connect_input - connect dapm widgets + * @codec: audio codec + * @sink: name of target widget + * @control: mixer control name + * @source: name of source name + * + * Connects 2 dapm widgets together via a named audio path. The sink is + * the widget receiving the audio signal, whilst the source is the sender + * of the audio signal. + * + * This function has been deprecated in favour of snd_soc_dapm_add_routes(). + * + * Returns 0 for success else error. + */ +int snd_soc_dapm_connect_input(struct snd_soc_codec *codec, const char *sink, + const char *control, const char *source) +{ + return snd_soc_dapm_add_route(codec, sink, control, source); +} EXPORT_SYMBOL_GPL(snd_soc_dapm_connect_input); +/** + * snd_soc_dapm_add_routes - Add routes between DAPM widgets + * @codec: codec + * @route: audio routes + * @num: number of routes + * + * Connects 2 dapm widgets together via a named audio path. The sink is + * the widget receiving the audio signal, whilst the source is the sender + * of the audio signal. + * + * Returns 0 for success else error. On error all resources can be freed + * with a call to snd_soc_card_free(). + */ +int snd_soc_dapm_add_routes(struct snd_soc_codec *codec, + const struct snd_soc_dapm_route *route, int num) +{ + int i, ret; + + for (i = 0; i < num; i++) { + ret = snd_soc_dapm_add_route(codec, route->sink, + route->control, route->source); + if (ret < 0) { + printk(KERN_ERR "Failed to add route %s->%s\n", + route->source, + route->sink); + return ret; + } + route++; + } + + return 0; +} +EXPORT_SYMBOL_GPL(snd_soc_dapm_add_routes); + /** * snd_soc_dapm_new_widgets - add new dapm widgets * @codec: audio codec -- cgit v1.2.3 From d0cc0d3a95cc3c022ee118072d243d3670ec1663 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 13 May 2008 14:55:22 +0200 Subject: [ALSA] soc - tlv320aic3x - Convert to use bulk registration APIs Signed-off-by: Mark Brown Cc: Jarkko Nikula Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/codecs/tlv320aic3x.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 957996e0eba2..cb8365ac0c02 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -497,7 +497,7 @@ static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = { SND_SOC_DAPM_INPUT("LINE2R"), }; -static const char *intercon[][3] = { +static const struct snd_soc_dapm_route intercon[] = { /* Left Output */ {"Left DAC Mux", "DAC_L1", "Left DAC"}, {"Left DAC Mux", "DAC_L2", "Left DAC"}, @@ -641,22 +641,15 @@ static const char *intercon[][3] = { {"Right Line Out", NULL, "Right Line2 Bypass Mixer"}, {"Mono Out", NULL, "Right Line2 Bypass Mixer"}, {"Right HP Out", NULL, "Right Line2 Bypass Mixer"}, - - /* terminator */ - {NULL, NULL, NULL}, }; static int aic3x_add_widgets(struct snd_soc_codec *codec) { - int i; - - for (i = 0; i < ARRAY_SIZE(aic3x_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &aic3x_dapm_widgets[i]); + snd_soc_dapm_new_controls(codec, aic3x_dapm_widgets, + ARRAY_SIZE(aic3x_dapm_widgets)); /* set up audio path interconnects */ - for (i = 0; intercon[i][0] != NULL; i++) - snd_soc_dapm_connect_input(codec, intercon[i][0], - intercon[i][1], intercon[i][2]); + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); snd_soc_dapm_new_widgets(codec); return 0; -- cgit v1.2.3 From 25191c45aec54cd01b53391bb0b0e1e60377a5fc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 13 May 2008 14:55:48 +0200 Subject: [ALSA] soc - Zaurus - Convert to bulk DAPM registration APIs Signed-off-by: Mark Brown Cc: Richard Purdie Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/pxa/corgi.c | 12 ++++-------- sound/soc/pxa/poodle.c | 14 +++++--------- sound/soc/pxa/spitz.c | 14 +++++--------- sound/soc/pxa/tosa.c | 14 ++++---------- 4 files changed, 18 insertions(+), 36 deletions(-) diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index 7f32a1167572..852f16d963a1 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -247,7 +247,7 @@ SND_SOC_DAPM_HP("Headset Jack", NULL), }; /* Corgi machine audio map (connections to the codec pins) */ -static const char *audio_map[][3] = { +static const struct snd_soc_dapm_route audio_map[] = { /* headset Jack - in = micin, out = LHPOUT*/ {"Headset Jack", NULL, "LHPOUT"}, @@ -265,8 +265,6 @@ static const char *audio_map[][3] = { /* Same as the above but no mic bias for line signals */ {"MICIN", NULL, "Line Jack"}, - - {NULL, NULL, NULL}, }; static const char *jack_function[] = {"Headphone", "Mic", "Line", "Headset", @@ -303,13 +301,11 @@ static int corgi_wm8731_init(struct snd_soc_codec *codec) } /* Add corgi specific widgets */ - for (i = 0; i < ARRAY_SIZE(wm8731_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &wm8731_dapm_widgets[i]); + snd_soc_dapm_new_controls(codec, wm8731_dapm_widgets, + ARRAY_SIZE(wm8731_dapm_widgets)); /* Set up corgi specific audio path audio_map */ - for (i = 0; audio_map[i][0] != NULL; i++) - snd_soc_dapm_connect_input(codec, audio_map[i][0], - audio_map[i][1], audio_map[i][2]); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); snd_soc_dapm_sync_endpoints(codec); return 0; diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index 7e830b218943..810f1fe158ab 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -215,8 +215,8 @@ SND_SOC_DAPM_HP("Headphone Jack", NULL), SND_SOC_DAPM_SPK("Ext Spk", poodle_amp_event), }; -/* Corgi machine audio_mapnections to the codec pins */ -static const char *audio_map[][3] = { +/* Corgi machine connections to the codec pins */ +static const struct snd_soc_dapm_route audio_map[] = { /* headphone connected to LHPOUT1, RHPOUT1 */ {"Headphone Jack", NULL, "LHPOUT"}, @@ -225,8 +225,6 @@ static const char *audio_map[][3] = { /* speaker connected to LOUT, ROUT */ {"Ext Spk", NULL, "ROUT"}, {"Ext Spk", NULL, "LOUT"}, - - {NULL, NULL, NULL}, }; static const char *jack_function[] = {"Off", "Headphone"}; @@ -263,13 +261,11 @@ static int poodle_wm8731_init(struct snd_soc_codec *codec) } /* Add poodle specific widgets */ - for (i = 0; i < ARRAY_SIZE(wm8731_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &wm8731_dapm_widgets[i]); + snd_soc_dapm_new_controls(codec, wm8731_dapm_widgets, + ARRAY_SIZE(wm8731_dapm_widgets)); /* Set up poodle specific audio path audio_map */ - for (i = 0; audio_map[i][0] != NULL; i++) - snd_soc_dapm_connect_input(codec, audio_map[i][0], - audio_map[i][1], audio_map[i][2]); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); snd_soc_dapm_sync_endpoints(codec); return 0; diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c index d8b8372db00e..73a6df8709e1 100644 --- a/sound/soc/pxa/spitz.c +++ b/sound/soc/pxa/spitz.c @@ -250,7 +250,7 @@ static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = { }; /* Spitz machine audio_map */ -static const char *audio_map[][3] = { +static const struct snd_soc_dapm_route audio_map[] = { /* headphone connected to LOUT1, ROUT1 */ {"Headphone Jack", NULL, "LOUT1"}, @@ -269,8 +269,6 @@ static const char *audio_map[][3] = { /* line is connected to input 1 - no bias */ {"LINPUT1", NULL, "Line Jack"}, - - {NULL, NULL, NULL}, }; static const char *jack_function[] = {"Headphone", "Mic", "Line", "Headset", @@ -313,13 +311,11 @@ static int spitz_wm8750_init(struct snd_soc_codec *codec) } /* Add spitz specific widgets */ - for (i = 0; i < ARRAY_SIZE(wm8750_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &wm8750_dapm_widgets[i]); + snd_soc_dapm_new_controls(codec, wm8750_dapm_widgets, + ARRAY_SIZE(wm8750_dapm_widgets)); - /* Set up spitz specific audio path audio_map */ - for (i = 0; audio_map[i][0] != NULL; i++) - snd_soc_dapm_connect_input(codec, audio_map[i][0], - audio_map[i][1], audio_map[i][2]); + /* Set up spitz specific audio paths */ + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); snd_soc_dapm_sync_endpoints(codec); return 0; diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index 7346d7e5d066..fda2aa056d53 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -154,7 +154,7 @@ SND_SOC_DAPM_SPK("Speaker", NULL), }; /* tosa audio map */ -static const char *audio_map[][3] = { +static const snd_soc_dapm_route audio_map[] = { /* headphone connected to HPOUTL, HPOUTR */ {"Headphone Jack", NULL, "HPOUTL"}, @@ -173,8 +173,6 @@ static const char *audio_map[][3] = { {"Headset Jack", NULL, "HPOUTR"}, {"LINEINR", NULL, "Mic Bias"}, {"Mic Bias", NULL, "Headset Jack"}, - - {NULL, NULL, NULL}, }; static const char *jack_function[] = {"Headphone", "Mic", "Line", "Headset", @@ -208,15 +206,11 @@ static int tosa_ac97_init(struct snd_soc_codec *codec) } /* add tosa specific widgets */ - for (i = 0; i < ARRAY_SIZE(tosa_dapm_widgets); i++) { - snd_soc_dapm_new_control(codec, &tosa_dapm_widgets[i]); - } + snd_soc_dapm_new_controls(codec, &tosa_dapm_widgets, + ARRAY_SIZE(tosa_dapm_widgets)); /* set up tosa specific audio path audio_map */ - for (i = 0; audio_map[i][0] != NULL; i++) { - snd_soc_dapm_connect_input(codec, audio_map[i][0], - audio_map[i][1], audio_map[i][2]); - } + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); snd_soc_dapm_sync_endpoints(codec); return 0; -- cgit v1.2.3 From 51e6a8411a9440f0fdba6cdd7d779e74f89debc4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 13 May 2008 14:57:37 +0200 Subject: [ALSA] soc - eti_b1_wm8731 - Convert to use bulk DAPM control registration Signed-off-by: Mark Brown Cc: Frank Mandarino Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/at91/eti_b1_wm8731.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) diff --git a/sound/soc/at91/eti_b1_wm8731.c b/sound/soc/at91/eti_b1_wm8731.c index 1347dcf3f80b..4a383a4a0ff1 100644 --- a/sound/soc/at91/eti_b1_wm8731.c +++ b/sound/soc/at91/eti_b1_wm8731.c @@ -191,7 +191,7 @@ static const struct snd_soc_dapm_widget eti_b1_dapm_widgets[] = { SND_SOC_DAPM_SPK("Ext Spk", NULL), }; -static const char *intercon[][3] = { +static const struct snd_soc_dapm_route intercon[] = { /* speaker connected to LHPOUT */ {"Ext Spk", NULL, "LHPOUT"}, @@ -199,9 +199,6 @@ static const char *intercon[][3] = { /* mic is connected to Mic Jack, with WM8731 Mic Bias */ {"MICIN", NULL, "Mic Bias"}, {"Mic Bias", NULL, "Int Mic"}, - - /* terminator */ - {NULL, NULL, NULL}, }; /* @@ -209,20 +206,14 @@ static const char *intercon[][3] = { */ static int eti_b1_wm8731_init(struct snd_soc_codec *codec) { - int i; - DBG("eti_b1_wm8731_init() called\n"); /* Add specific widgets */ - for(i = 0; i < ARRAY_SIZE(eti_b1_dapm_widgets); i++) { - snd_soc_dapm_new_control(codec, &eti_b1_dapm_widgets[i]); - } + snd_soc_dapm_new_controls(codec, eti_b1_dapm_widgets, + ARRAY_SIZE(eti_b1_dapm_widgets)); /* Set up specific audio path interconnects */ - for(i = 0; intercon[i][0] != NULL; i++) { - snd_soc_dapm_connect_input(codec, intercon[i][0], - intercon[i][1], intercon[i][2]); - } + snd_soc_dapm_add_route(codec, intercon, ARRAY_SIZE(intercon)); /* not connected */ snd_soc_dapm_set_endpoint(codec, "RLINEIN", 0); -- cgit v1.2.3 From 8f3112d7a847c2933a42ce29f17899f585d09106 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 13 May 2008 14:58:03 +0200 Subject: [ALSA] soc - neo1973_wm8753 - Convert to bulk DAPM registration APIs Signed-off-by: Mark Brown Cc: Graeme Gregory Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/s3c24xx/neo1973_wm8753.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index e469186a407d..79c5027273cb 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -425,8 +425,7 @@ static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = { }; -/* example machine audio_mapnections */ -static const char *audio_map[][3] = { +static const struct snd_soc_dapm_route dapm_routes[] = { /* Connections to the lm4857 amp */ {"Audio Out", NULL, "LOUT1"}, @@ -449,8 +448,6 @@ static const char *audio_map[][3] = { /* Connect the ALC pins */ {"ACIN", NULL, "ACOP"}, - - {NULL, NULL, NULL}, }; static const char *lm4857_mode[] = { @@ -526,8 +523,8 @@ static int neo1973_wm8753_init(struct snd_soc_codec *codec) set_scenario_endpoints(codec, NEO_AUDIO_OFF); /* Add neo1973 specific widgets */ - for (i = 0; i < ARRAY_SIZE(wm8753_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &wm8753_dapm_widgets[i]); + snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets, + ARRAY_SIZE(wm8753_dapm_widgets)); /* add neo1973 specific controls */ for (i = 0; i < ARRAY_SIZE(wm8753_neo1973_controls); i++) { @@ -538,11 +535,9 @@ static int neo1973_wm8753_init(struct snd_soc_codec *codec) return err; } - /* set up neo1973 specific audio path audio_mapnects */ - for (i = 0; audio_map[i][0] != NULL; i++) { - snd_soc_dapm_connect_input(codec, audio_map[i][0], - audio_map[i][1], audio_map[i][2]); - } + /* set up neo1973 specific audio routes */ + err = snd_soc_dapm_add_routes(codec, dapm_routes, + ARRAY_SIZE(dapm_routes)); snd_soc_dapm_sync_endpoints(codec); return 0; -- cgit v1.2.3 From acf497f996aa08f03c62a3150abd7939ae23de4c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 13 May 2008 14:58:30 +0200 Subject: [ALSA] soc - davinci-evm - Update for bulk DAPM registration APIs Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/davinci/davinci-evm.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index fcd165240333..4c70a0ed3397 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -71,7 +71,7 @@ static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = { }; /* davinci-evm machine audio_mapnections to the codec pins */ -static const char *audio_map[][3] = { +static const struct snd_soc_dapm_route audio_map[] = { /* Headphone connected to HPLOUT, HPROUT */ {"Headphone Jack", NULL, "HPLOUT"}, {"Headphone Jack", NULL, "HPROUT"}, @@ -90,23 +90,17 @@ static const char *audio_map[][3] = { {"LINE2L", NULL, "Line In"}, {"LINE1R", NULL, "Line In"}, {"LINE2R", NULL, "Line In"}, - - {NULL, NULL, NULL}, }; /* Logic for a aic3x as connected on a davinci-evm */ static int evm_aic3x_init(struct snd_soc_codec *codec) { - int i; - /* Add davinci-evm specific widgets */ - for (i = 0; i < ARRAY_SIZE(aic3x_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &aic3x_dapm_widgets[i]); + snd_soc_dapm_new_controls(codec, aic3x_dapm_widgets, + ARRAY_SIZE(aic3x_dapm_widgets)); /* Set up davinci-evm specific audio path audio_map */ - for (i = 0; audio_map[i][0] != NULL; i++) - snd_soc_dapm_connect_input(codec, audio_map[i][0], - audio_map[i][1], audio_map[i][2]); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); /* not connected */ snd_soc_dapm_set_endpoint(codec, "MONO_LOUT", 0); -- cgit v1.2.3 From 1a2505988ea650b61bd07722e99080a40ff27653 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 13 May 2008 14:58:57 +0200 Subject: [ALSA] soc - n810 - Update for bulk DAPM registration APIs Signed-off-by: Mark Brown Cc: Jarkko Nikula Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/omap/n810.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index 6533563a6011..c2afffbe8da6 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -177,7 +177,7 @@ static const struct snd_soc_dapm_widget aic33_dapm_widgets[] = { SND_SOC_DAPM_HP("Headphone Jack", n810_jack_event), }; -static const char *audio_map[][3] = { +static const struct snd_soc_dapm_route audio_map[] = { {"Headphone Jack", NULL, "HPLOUT"}, {"Headphone Jack", NULL, "HPROUT"}, @@ -217,13 +217,11 @@ static int n810_aic33_init(struct snd_soc_codec *codec) } /* Add N810 specific widgets */ - for (i = 0; i < ARRAY_SIZE(aic33_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &aic33_dapm_widgets[i]); + snd_soc_dapm_new_controls(codec, aic33_dapm_widgets, + ARRAY_SIZE(aic33_dapm_widgets)); /* Set up N810 specific audio path audio_map */ - for (i = 0; i < ARRAY_SIZE(audio_map); i++) - snd_soc_dapm_connect_input(codec, audio_map[i][0], - audio_map[i][1], audio_map[i][2]); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); snd_soc_dapm_sync_endpoints(codec); -- cgit v1.2.3 From f99a633a151686a599413bef758253dfd04887d1 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 15 May 2008 11:01:36 +0200 Subject: [ALSA] ASoC: Convert N810 machine driver to use gpiolib Use gpiolib since it is now available for OMAPs. Change also references to HW version RX44 to product name N810. Signed-off-by: Jarkko Nikula Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/omap/n810.c | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-) diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index c2afffbe8da6..c32487b6c7b0 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -30,15 +30,15 @@ #include #include -#include +#include #include #include "omap-mcbsp.h" #include "omap-pcm.h" #include "../codecs/tlv320aic3x.h" -#define RX44_HEADSET_AMP_GPIO 10 -#define RX44_SPEAKER_AMP_GPIO 101 +#define N810_HEADSET_AMP_GPIO 10 +#define N810_SPEAKER_AMP_GPIO 101 static struct clk *sys_clkout2; static struct clk *sys_clkout2_src; @@ -154,9 +154,9 @@ static int n810_spk_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { if (SND_SOC_DAPM_EVENT_ON(event)) - omap_set_gpio_dataout(RX44_SPEAKER_AMP_GPIO, 1); + gpio_set_value(N810_SPEAKER_AMP_GPIO, 1); else - omap_set_gpio_dataout(RX44_SPEAKER_AMP_GPIO, 0); + gpio_set_value(N810_SPEAKER_AMP_GPIO, 0); return 0; } @@ -165,9 +165,9 @@ static int n810_jack_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { if (SND_SOC_DAPM_EVENT_ON(event)) - omap_set_gpio_dataout(RX44_HEADSET_AMP_GPIO, 1); + gpio_set_value(N810_HEADSET_AMP_GPIO, 1); else - omap_set_gpio_dataout(RX44_HEADSET_AMP_GPIO, 0); + gpio_set_value(N810_HEADSET_AMP_GPIO, 0); return 0; } @@ -303,12 +303,12 @@ static int __init n810_soc_init(void) clk_set_parent(sys_clkout2_src, func96m_clk); clk_set_rate(sys_clkout2, 12000000); - if (omap_request_gpio(RX44_HEADSET_AMP_GPIO) < 0) + if (gpio_request(N810_HEADSET_AMP_GPIO, "hs_amp") < 0) BUG(); - if (omap_request_gpio(RX44_SPEAKER_AMP_GPIO) < 0) + if (gpio_request(N810_SPEAKER_AMP_GPIO, "spk_amp") < 0) BUG(); - omap_set_gpio_direction(RX44_HEADSET_AMP_GPIO, 0); - omap_set_gpio_direction(RX44_SPEAKER_AMP_GPIO, 0); + gpio_direction_output(N810_HEADSET_AMP_GPIO, 0); + gpio_direction_output(N810_SPEAKER_AMP_GPIO, 0); return 0; err2: @@ -323,6 +323,9 @@ err1: static void __exit n810_soc_exit(void) { + gpio_free(N810_SPEAKER_AMP_GPIO); + gpio_free(N810_HEADSET_AMP_GPIO); + platform_device_unregister(n810_snd_device); } -- cgit v1.2.3 From 02330fbaaded5b603cba112e4bbf62cdadec159a Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Fri, 16 May 2008 12:18:29 +0200 Subject: [ALSA] PCI168 snd-azt3328 Linux driver: another huge update - figured out 'Digital(ly) Enhanced Game Port' functionality, implemented support for it (eliminating gameport polling overhead) - removed optional joystick activation, gameport now enabled unconditionally, since we now support it via the PCI I/O space, not via conflict-prone legacy I/O (which I was thus able to DISABLE now)! - fix playback bug (a muted wave output would get unmuted upon start of playback, of course this is not what we want, thus remember mute state) - implement partial power management: when idle, lower clock rate and disable codec (reduced noise!), and disable gameport circuit when unused - instantiate OPL3 timer, too - much better implementation of snd_azf3328_mixer_write_volume_gradually() - slightly optimized interrupt handling - lots of cleanup This time, I also found a way to verify proper OPL3 operation via MIDI file playback (emulation via synth hardware). Signed-off-by: Andreas Mohr Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/pci/azt3328.c | 1192 ++++++++++++++++++++++++++++++++++----------------- sound/pci/azt3328.h | 197 +++++++-- 2 files changed, 968 insertions(+), 421 deletions(-) diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c index 5f63af6b88a2..b832333c3023 100644 --- a/sound/pci/azt3328.c +++ b/sound/pci/azt3328.c @@ -1,6 +1,6 @@ /* * azt3328.c - driver for Aztech AZF3328 based soundcards (e.g. PCI168). - * Copyright (C) 2002, 2005, 2006, 2007 by Andreas Mohr + * Copyright (C) 2002, 2005 - 2008 by Andreas Mohr * * Framework borrowed from Bart Hartgers's als4000.c. * Driver developed on PCI168 AP(W) version (PCI rev. 10, subsystem ID 1801), @@ -35,9 +35,20 @@ * (3 weeks' worth of evenings filled with driver work). * (and no, I did NOT go the easy way: to pick up a SB PCI128 for 9 Euros) * + * It is quite likely that the AZF3328 chip is the PCI cousin of the + * AZF3318 ("azt1020 pnp", "MM Pro 16") ISA chip, given very similar specs. + * * The AZF3328 chip (note: AZF3328, *not* AZT3328, that's just the driver name - * for compatibility reasons) has the following features: + * for compatibility reasons) from Azfin (joint-venture of Aztech and Fincitec, + * Fincitec acquired by National Semiconductor in 2002, together with the + * Fincitec-related company ARSmikro) has the following features: * + * - compatibility & compliance: + * - Microsoft PC 97 ("PC 97 Hardware Design Guide", + * http://www.microsoft.com/whdc/archive/pcguides.mspx) + * - Microsoft PC 98 Baseline Audio + * - MPU401 UART + * - Sound Blaster Emulation (DOS Box) * - builtin AC97 conformant codec (SNR over 80dB) * Note that "conformant" != "compliant"!! this chip's mixer register layout * *differs* from the standard AC97 layout: @@ -48,21 +59,28 @@ * addresses illegally. So far unfortunately it looks like the very flexible * ALSA AC97 support is still not enough to easily compensate for such a * grave layout violation despite all tweaks and quirks mechanisms it offers. - * - builtin genuine OPL3 + * - builtin genuine OPL3 - verified to work fine, 20080506 * - full duplex 16bit playback/record at independent sampling rate - * - MPU401 (+ legacy address support) FIXME: how to enable legacy addr?? + * - MPU401 (+ legacy address support, claimed by one official spec sheet) + * FIXME: how to enable legacy addr?? * - game port (legacy address support) - * - builtin 3D enhancement (said to be YAMAHA Ymersion) * - builtin DirectInput support, helps reduce CPU overhead (interrupt-driven - * features supported) + * features supported). - See common term "Digital Enhanced Game Port"... + * (probably DirectInput 3.0 spec - confirm) + * - builtin 3D enhancement (said to be YAMAHA Ymersion) * - built-in General DirectX timer having a 20 bits counter * with 1us resolution (see below!) - * - I2S serial port for external DAC + * - I2S serial output port for external DAC * - supports 33MHz PCI spec 2.1, PCI power management 1.0, compliant with ACPI * - supports hardware volume control * - single chip low cost solution (128 pin QFP) * - supports programmable Sub-vendor and Sub-system ID * required for Microsoft's logo compliance (FIXME: where?) + * At least the Trident 4D Wave DX has one bit somewhere + * to enable writes to PCI subsystem VID registers, that should be it. + * This might easily be in extended PCI reg space, since PCI168 also has + * some custom data starting at 0x80. What kind of config settings + * are located in our extended PCI space anyway?? * - PCI168 AP(W) card: power amplifier with 4 Watts/channel at 4 Ohms * * Note that this driver now is actually *better* than the Windows driver, @@ -74,6 +92,24 @@ * - "timidity -iAv -B2,8 -Os -EFreverb=0" * - "pmidi -p 128:0 jazz.mid" * + * OPL3 hardware playback testing, try something like: + * cat /proc/asound/hwdep + * and + * aconnect -o + * Then use + * sbiload -Dhw:x,y --opl3 /usr/share/sounds/opl3/std.o3 ......./drums.o3 + * where x,y is the xx-yy number as given in hwdep. + * Then try + * pmidi -p a:b jazz.mid + * where a:b is the client number plus 0 usually, as given by aconnect above. + * Oh, and make sure to unmute the FM mixer control (doh!) + * NOTE: power use during OPL3 playback is _VERY_ high (70W --> 90W!) + * despite no CPU activity, possibly due to hindering ACPI idling somehow. + * Shouldn't be a problem of the AZF3328 chip itself, I'd hope. + * Higher PCM / FM mixer levels seem to conflict (causes crackling), + * at least sometimes. Maybe even use with hardware sequencer timer above :) + * adplay/adplug-utils might soon offer hardware-based OPL3 playback, too. + * * Certain PCI versions of this card are susceptible to DMA traffic underruns * in some systems (resulting in sound crackling/clicking/popping), * probably because they don't have a DMA FIFO buffer or so. @@ -87,6 +123,8 @@ * better than a VIA, yet ironically I still get crackling, like many other * people with the same chipset. * Possible remedies: + * - use speaker (amplifier) output instead of headphone output + * (in case crackling is due to overloaded output clipping) * - plug card into a different PCI slot, preferrably one that isn't shared * too much (this helps a lot, but not completely!) * - get rid of PCI VGA card, use AGP instead @@ -94,18 +132,23 @@ * - fiddle with PCI latency settings (setpci -v -s BUSID latency_timer=XX) * Not too helpful. * - Disable ACPI/power management/"Auto Detect RAM/PCI Clk" in BIOS - * + * * BUGS - * - full-duplex might *still* be problematic, not fully tested recently + * - full-duplex might *still* be problematic, however a recent test was fine * - (non-bug) "Bass/Treble or 3D settings don't work" - they do get evaluated * if you set PCM output switch to "pre 3D" instead of "post 3D". * If this can't be set, then get a mixer application that Isn't Stupid (tm) * (e.g. kmix, gamix) - unfortunately several are!! - * + * - locking is not entirely clean, especially the audio stream activity + * ints --> may be racy + * - an _unconnected_ secondary joystick at the gameport will be reported + * to be "active" (floating values, not precisely -1) due to the way we need + * to read the Digital Enhanced Game Port. Not sure whether it is fixable. + * * TODO * - test MPU401 MIDI playback etc. - * - add some power micro-management (disable various units of the card - * as long as they're unused). However this requires I/O ports which I + * - add more power micro-management (disable various units of the card + * as long as they're unused). However this requires more I/O ports which I * haven't figured out yet and which thus might not even exist... * The standard suspend/resume functionality could probably make use of * some improvement, too... @@ -113,6 +156,7 @@ * - figure out some cleverly evil scheme to possibly make ALSA AC97 code * fully accept our quite incompatible ""AC97"" mixer and thus save some * code (but I'm not too optimistic that doing this is possible at all) + * - use MMIO (memory-mapped I/O)? Slightly faster access, e.g. for gameport. */ #include @@ -138,7 +182,7 @@ MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Aztech,AZF3328}}"); #if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE)) -#define SUPPORT_JOYSTICK 1 +#define SUPPORT_GAMEPORT 1 #endif #define DEBUG_MISC 0 @@ -147,13 +191,14 @@ MODULE_SUPPORTED_DEVICE("{{Aztech,AZF3328}}"); #define DEBUG_PLAY_REC 0 #define DEBUG_IO 0 #define DEBUG_TIMER 0 +#define DEBUG_GAME 0 #define MIXER_TESTING 0 #if DEBUG_MISC #define snd_azf3328_dbgmisc(format, args...) printk(KERN_ERR format, ##args) #else #define snd_azf3328_dbgmisc(format, args...) -#endif +#endif #if DEBUG_CALLS #define snd_azf3328_dbgcalls(format, args...) printk(format, ##args) @@ -163,25 +208,31 @@ MODULE_SUPPORTED_DEVICE("{{Aztech,AZF3328}}"); #define snd_azf3328_dbgcalls(format, args...) #define snd_azf3328_dbgcallenter() #define snd_azf3328_dbgcallleave() -#endif +#endif #if DEBUG_MIXER #define snd_azf3328_dbgmixer(format, args...) printk(format, ##args) #else #define snd_azf3328_dbgmixer(format, args...) -#endif +#endif #if DEBUG_PLAY_REC #define snd_azf3328_dbgplay(format, args...) printk(KERN_ERR format, ##args) #else #define snd_azf3328_dbgplay(format, args...) -#endif +#endif #if DEBUG_MISC #define snd_azf3328_dbgtimer(format, args...) printk(KERN_ERR format, ##args) #else #define snd_azf3328_dbgtimer(format, args...) -#endif +#endif + +#if DEBUG_GAME +#define snd_azf3328_dbggame(format, args...) printk(KERN_ERR format, ##args) +#else +#define snd_azf3328_dbggame(format, args...) +#endif static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ module_param_array(index, int, NULL, 0444); @@ -195,39 +246,44 @@ static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card * module_param_array(enable, bool, NULL, 0444); MODULE_PARM_DESC(enable, "Enable AZF3328 soundcard."); -#ifdef SUPPORT_JOYSTICK -static int joystick[SNDRV_CARDS]; -module_param_array(joystick, bool, NULL, 0444); -MODULE_PARM_DESC(joystick, "Enable joystick for AZF3328 soundcard."); -#endif - static int seqtimer_scaling = 128; module_param(seqtimer_scaling, int, 0444); MODULE_PARM_DESC(seqtimer_scaling, "Set 1024000Hz sequencer timer scale factor (lockup danger!). Default 128."); +struct snd_azf3328_audio_stream { + struct snd_pcm_substream *substream; + int enabled; + int running; + unsigned long portbase; +}; + +enum snd_azf3328_stream_index { + AZF_PLAYBACK = 0, + AZF_CAPTURE = 1, +}; + struct snd_azf3328 { /* often-used fields towards beginning, then grouped */ - unsigned long codec_port; - unsigned long io2_port; - unsigned long mpu_port; - unsigned long synth_port; - unsigned long mixer_port; + + unsigned long codec_io; /* usually 0xb000, size 128 */ + unsigned long game_io; /* usually 0xb400, size 8 */ + unsigned long mpu_io; /* usually 0xb800, size 4 */ + unsigned long opl3_io; /* usually 0xbc00, size 8 */ + unsigned long mixer_io; /* usually 0xc000, size 64 */ spinlock_t reg_lock; struct snd_timer *timer; - + struct snd_pcm *pcm; - struct snd_pcm_substream *playback_substream; - struct snd_pcm_substream *capture_substream; - unsigned int is_playing; - unsigned int is_recording; + struct snd_azf3328_audio_stream audio_stream[2]; struct snd_card *card; struct snd_rawmidi *rmidi; -#ifdef SUPPORT_JOYSTICK +#ifdef SUPPORT_GAMEPORT struct gameport *gameport; + int axes[4]; #endif struct pci_dev *pci; @@ -236,10 +292,10 @@ struct snd_azf3328 { #ifdef CONFIG_PM /* register value containers for power management * Note: not always full I/O range preserved (just like Win driver!) */ - u16 saved_regs_codec [AZF_IO_SIZE_CODEC_PM / 2]; - u16 saved_regs_io2 [AZF_IO_SIZE_IO2_PM / 2]; - u16 saved_regs_mpu [AZF_IO_SIZE_MPU_PM / 2]; - u16 saved_regs_synth[AZF_IO_SIZE_SYNTH_PM / 2]; + u16 saved_regs_codec[AZF_IO_SIZE_CODEC_PM / 2]; + u16 saved_regs_game [AZF_IO_SIZE_GAME_PM / 2]; + u16 saved_regs_mpu [AZF_IO_SIZE_MPU_PM / 2]; + u16 saved_regs_opl3 [AZF_IO_SIZE_OPL3_PM / 2]; u16 saved_regs_mixer[AZF_IO_SIZE_MIXER_PM / 2]; #endif }; @@ -252,126 +308,181 @@ static const struct pci_device_id snd_azf3328_ids[] = { MODULE_DEVICE_TABLE(pci, snd_azf3328_ids); + +static int +snd_azf3328_io_reg_setb(unsigned reg, u8 mask, int do_set) +{ + u8 prev = inb(reg), new; + + new = (do_set) ? (prev|mask) : (prev & ~mask); + /* we need to always write the new value no matter whether it differs + * or not, since some register bits don't indicate their setting */ + outb(new, reg); + if (new != prev) + return 1; + + return 0; +} + +static int +snd_azf3328_io_reg_setw(unsigned reg, u16 mask, int do_set) +{ + u16 prev = inw(reg), new; + + new = (do_set) ? (prev|mask) : (prev & ~mask); + /* we need to always write the new value no matter whether it differs + * or not, since some register bits don't indicate their setting */ + outw(new, reg); + if (new != prev) + return 1; + + return 0; +} + static inline void -snd_azf3328_codec_outb(const struct snd_azf3328 *chip, int reg, u8 value) +snd_azf3328_codec_outb(const struct snd_azf3328 *chip, unsigned reg, u8 value) { - outb(value, chip->codec_port + reg); + outb(value, chip->codec_io + reg); } static inline u8 -snd_azf3328_codec_inb(const struct snd_azf3328 *chip, int reg) +snd_azf3328_codec_inb(const struct snd_azf3328 *chip, unsigned reg) { - return inb(chip->codec_port + reg); + return inb(chip->codec_io + reg); } static inline void -snd_azf3328_codec_outw(const struct snd_azf3328 *chip, int reg, u16 value) +snd_azf3328_codec_outw(const struct snd_azf3328 *chip, unsigned reg, u16 value) { - outw(value, chip->codec_port + reg); + outw(value, chip->codec_io + reg); } static inline u16 -snd_azf3328_codec_inw(const struct snd_azf3328 *chip, int reg) +snd_azf3328_codec_inw(const struct snd_azf3328 *chip, unsigned reg) +{ + return inw(chip->codec_io + reg); +} + +static inline void +snd_azf3328_codec_outl(const struct snd_azf3328 *chip, unsigned reg, u32 value) +{ + outl(value, chip->codec_io + reg); +} + +static inline u32 +snd_azf3328_codec_inl(const struct snd_azf3328 *chip, unsigned reg) { - return inw(chip->codec_port + reg); + return inl(chip->codec_io + reg); } static inline void -snd_azf3328_codec_outl(const struct snd_azf3328 *chip, int reg, u32 value) +snd_azf3328_game_outb(const struct snd_azf3328 *chip, unsigned reg, u8 value) { - outl(value, chip->codec_port + reg); + outb(value, chip->game_io + reg); } static inline void -snd_azf3328_io2_outb(const struct snd_azf3328 *chip, int reg, u8 value) +snd_azf3328_game_outw(const struct snd_azf3328 *chip, unsigned reg, u16 value) { - outb(value, chip->io2_port + reg); + outw(value, chip->game_io + reg); } static inline u8 -snd_azf3328_io2_inb(const struct snd_azf3328 *chip, int reg) +snd_azf3328_game_inb(const struct snd_azf3328 *chip, unsigned reg) +{ + return inb(chip->game_io + reg); +} + +static inline u16 +snd_azf3328_game_inw(const struct snd_azf3328 *chip, unsigned reg) { - return inb(chip->io2_port + reg); + return inw(chip->game_io + reg); } static inline void -snd_azf3328_mixer_outw(const struct snd_azf3328 *chip, int reg, u16 value) +snd_azf3328_mixer_outw(const struct snd_azf3328 *chip, unsigned reg, u16 value) { - outw(value, chip->mixer_port + reg); + outw(value, chip->mixer_io + reg); } static inline u16 -snd_azf3328_mixer_inw(const struct snd_azf3328 *chip, int reg) +snd_azf3328_mixer_inw(const struct snd_azf3328 *chip, unsigned reg) { - return inw(chip->mixer_port + reg); + return inw(chip->mixer_io + reg); } -static void -snd_azf3328_mixer_set_mute(const struct snd_azf3328 *chip, int reg, int do_mute) +#define AZF_MUTE_BIT 0x80 + +static int +snd_azf3328_mixer_set_mute(const struct snd_azf3328 *chip, + unsigned reg, int do_mute +) { - unsigned long portbase = chip->mixer_port + reg + 1; - unsigned char oldval; + unsigned long portbase = chip->mixer_io + reg + 1; + int updated; /* the mute bit is on the *second* (i.e. right) register of a * left/right channel setting */ - oldval = inb(portbase); - if (do_mute) - oldval |= 0x80; - else - oldval &= ~0x80; - outb(oldval, portbase); + updated = snd_azf3328_io_reg_setb(portbase, AZF_MUTE_BIT, do_mute); + + /* indicate whether it was muted before */ + return (do_mute) ? !updated : updated; } static void -snd_azf3328_mixer_write_volume_gradually(const struct snd_azf3328 *chip, int reg, unsigned char dst_vol_left, unsigned char dst_vol_right, int chan_sel, int delay) +snd_azf3328_mixer_write_volume_gradually(const struct snd_azf3328 *chip, + unsigned reg, + unsigned char dst_vol_left, + unsigned char dst_vol_right, + int chan_sel, int delay +) { - unsigned long portbase = chip->mixer_port + reg; + unsigned long portbase = chip->mixer_io + reg; unsigned char curr_vol_left = 0, curr_vol_right = 0; - int left_done = 0, right_done = 0; - + int left_change = 0, right_change = 0; + snd_azf3328_dbgcallenter(); - if (chan_sel & SET_CHAN_LEFT) + + if (chan_sel & SET_CHAN_LEFT) { curr_vol_left = inb(portbase + 1); - else - left_done = 1; - if (chan_sel & SET_CHAN_RIGHT) + + /* take care of muting flag contained in left channel */ + if (curr_vol_left & AZF_MUTE_BIT) + dst_vol_left |= AZF_MUTE_BIT; + else + dst_vol_left &= ~AZF_MUTE_BIT; + + left_change = (curr_vol_left > dst_vol_left) ? -1 : 1; + } + + if (chan_sel & SET_CHAN_RIGHT) { curr_vol_right = inb(portbase + 0); - else - right_done = 1; - - /* take care of muting flag (0x80) contained in left channel */ - if (curr_vol_left & 0x80) - dst_vol_left |= 0x80; - else - dst_vol_left &= ~0x80; + + right_change = (curr_vol_right > dst_vol_right) ? -1 : 1; + } do { - if (!left_done) { - if (curr_vol_left > dst_vol_left) - curr_vol_left--; - else - if (curr_vol_left < dst_vol_left) - curr_vol_left++; - else - left_done = 1; - outb(curr_vol_left, portbase + 1); + if (left_change) { + if (curr_vol_left != dst_vol_left) { + curr_vol_left += left_change; + outb(curr_vol_left, portbase + 1); + } else + left_change = 0; } - if (!right_done) { - if (curr_vol_right > dst_vol_right) - curr_vol_right--; - else - if (curr_vol_right < dst_vol_right) - curr_vol_right++; - else - right_done = 1; + if (right_change) { + if (curr_vol_right != dst_vol_right) { + curr_vol_right += right_change; + /* during volume change, the right channel is crackling * somewhat more than the left channel, unfortunately. * This seems to be a hardware issue. */ - outb(curr_vol_right, portbase + 0); + outb(curr_vol_right, portbase + 0); + } else + right_change = 0; } if (delay) mdelay(delay); - } while ((!left_done) || (!right_done)); + } while ((left_change) || (right_change)); snd_azf3328_dbgcallleave(); } @@ -379,7 +490,7 @@ snd_azf3328_mixer_write_volume_gradually(const struct snd_azf3328 *chip, int reg * general mixer element */ struct azf3328_mixer_reg { - unsigned int reg; + unsigned reg; unsigned int lchan_shift, rchan_shift; unsigned int mask; unsigned int invert: 1; @@ -544,13 +655,14 @@ snd_azf3328_info_mixer_enum(struct snd_kcontrol *kcontrol, "Mix", "Mic" }; static const char * const texts3[] = { - "Mic", "CD", "Video", "Aux", + "Mic", "CD", "Video", "Aux", "Line", "Mix", "Mix Mono", "Phone" }; static const char * const texts4[] = { "pre 3D", "post 3D" }; struct azf3328_mixer_reg reg; + const char *p = NULL; snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; @@ -561,18 +673,20 @@ snd_azf3328_info_mixer_enum(struct snd_kcontrol *kcontrol, if (reg.reg == IDX_MIXER_ADVCTL2) { switch(reg.lchan_shift) { case 8: /* modem out sel */ - strcpy(uinfo->value.enumerated.name, texts1[uinfo->value.enumerated.item]); + p = texts1[uinfo->value.enumerated.item]; break; case 9: /* mono sel source */ - strcpy(uinfo->value.enumerated.name, texts2[uinfo->value.enumerated.item]); + p = texts2[uinfo->value.enumerated.item]; break; case 15: /* PCM Out Path */ - strcpy(uinfo->value.enumerated.name, texts4[uinfo->value.enumerated.item]); + p = texts4[uinfo->value.enumerated.item]; break; } } else - strcpy(uinfo->value.enumerated.name, texts3[uinfo->value.enumerated.item] -); + if (reg.reg == IDX_MIXER_REC_SELECT) + p = texts3[uinfo->value.enumerated.item]; + + strcpy(uinfo->value.enumerated.name, p); return 0; } @@ -583,7 +697,7 @@ snd_azf3328_get_mixer_enum(struct snd_kcontrol *kcontrol, struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); struct azf3328_mixer_reg reg; unsigned short val; - + snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); val = snd_azf3328_mixer_inw(chip, reg.reg); if (reg.reg == IDX_MIXER_REC_SELECT) { @@ -605,7 +719,7 @@ snd_azf3328_put_mixer_enum(struct snd_kcontrol *kcontrol, struct snd_azf3328 *chip = snd_kcontrol_chip(kcontrol); struct azf3328_mixer_reg reg; unsigned int oreg, nreg, val; - + snd_azf3328_mixer_reg_decode(®, kcontrol->private_value); oreg = snd_azf3328_mixer_inw(chip, reg.reg); val = oreg; @@ -717,15 +831,16 @@ snd_azf3328_mixer_new(struct snd_azf3328 *chip) snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000); /* mute and zero volume channels */ - for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_init_values); idx++) { + for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_init_values); ++idx) { snd_azf3328_mixer_outw(chip, snd_azf3328_init_values[idx][0], snd_azf3328_init_values[idx][1]); } - + /* add mixer controls */ sw = snd_azf3328_mixer_controls; - for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_mixer_controls); idx++, sw++) { + for (idx = 0; idx < ARRAY_SIZE(snd_azf3328_mixer_controls); + ++idx, ++sw) { if ((err = snd_ctl_add(chip->card, snd_ctl_new1(sw, chip))) < 0) return err; } @@ -757,8 +872,8 @@ snd_azf3328_hw_free(struct snd_pcm_substream *substream) } static void -snd_azf3328_setfmt(struct snd_azf3328 *chip, - unsigned int reg, +snd_azf3328_codec_setfmt(struct snd_azf3328 *chip, + unsigned reg, unsigned int bitrate, unsigned int format_width, unsigned int channels @@ -769,24 +884,25 @@ snd_azf3328_setfmt(struct snd_azf3328 *chip, snd_azf3328_dbgcallenter(); switch (bitrate) { - case 4000: val |= SOUNDFORMAT_FREQ_SUSPECTED_4000; break; - case 4800: val |= SOUNDFORMAT_FREQ_SUSPECTED_4800; break; - case 5512: val |= SOUNDFORMAT_FREQ_5510; break; /* the AZF3328 names it "5510" for some strange reason */ - case 6620: val |= SOUNDFORMAT_FREQ_6620; break; - case 8000: val |= SOUNDFORMAT_FREQ_8000; break; - case 9600: val |= SOUNDFORMAT_FREQ_9600; break; - case 11025: val |= SOUNDFORMAT_FREQ_11025; break; - case 13240: val |= SOUNDFORMAT_FREQ_SUSPECTED_13240; break; - case 16000: val |= SOUNDFORMAT_FREQ_16000; break; - case 22050: val |= SOUNDFORMAT_FREQ_22050; break; - case 32000: val |= SOUNDFORMAT_FREQ_32000; break; - case 44100: val |= SOUNDFORMAT_FREQ_44100; break; - case 48000: val |= SOUNDFORMAT_FREQ_48000; break; - case 66200: val |= SOUNDFORMAT_FREQ_SUSPECTED_66200; break; + case AZF_FREQ_4000: val |= SOUNDFORMAT_FREQ_SUSPECTED_4000; break; + case AZF_FREQ_4800: val |= SOUNDFORMAT_FREQ_SUSPECTED_4800; break; + case AZF_FREQ_5512: + /* the AZF3328 names it "5510" for some strange reason */ + val |= SOUNDFORMAT_FREQ_5510; break; + case AZF_FREQ_6620: val |= SOUNDFORMAT_FREQ_6620; break; + case AZF_FREQ_8000: val |= SOUNDFORMAT_FREQ_8000; break; + case AZF_FREQ_9600: val |= SOUNDFORMAT_FREQ_9600; break; + case AZF_FREQ_11025: val |= SOUNDFORMAT_FREQ_11025; break; + case AZF_FREQ_13240: val |= SOUNDFORMAT_FREQ_SUSPECTED_13240; break; + case AZF_FREQ_16000: val |= SOUNDFORMAT_FREQ_16000; break; + case AZF_FREQ_22050: val |= SOUNDFORMAT_FREQ_22050; break; + case AZF_FREQ_32000: val |= SOUNDFORMAT_FREQ_32000; break; default: snd_printk(KERN_WARNING "unknown bitrate %d, assuming 44.1kHz!\n", bitrate); - val |= SOUNDFORMAT_FREQ_44100; - break; + /* fall-through */ + case AZF_FREQ_44100: val |= SOUNDFORMAT_FREQ_44100; break; + case AZF_FREQ_48000: val |= SOUNDFORMAT_FREQ_48000; break; + case AZF_FREQ_66200: val |= SOUNDFORMAT_FREQ_SUSPECTED_66200; break; } /* val = 0xff07; 3m27.993s (65301Hz; -> 64000Hz???) hmm, 66120, 65967, 66123 */ /* val = 0xff09; 17m15.098s (13123,478Hz; -> 12000Hz???) hmm, 13237.2Hz? */ @@ -805,10 +921,10 @@ snd_azf3328_setfmt(struct snd_azf3328 *chip, val |= SOUNDFORMAT_FLAG_16BIT; spin_lock_irqsave(&chip->reg_lock, flags); - + /* set bitrate/format */ snd_azf3328_codec_outw(chip, reg, val); - + /* changing the bitrate/format settings switches off the * audio output with an annoying click in case of 8/16bit format change * (maybe shutting down DAC/ADC?), thus immediately @@ -830,31 +946,81 @@ snd_azf3328_setfmt(struct snd_azf3328 *chip, snd_azf3328_dbgcallleave(); } +static inline void +snd_azf3328_codec_setfmt_lowpower(struct snd_azf3328 *chip, + unsigned reg +) +{ + /* choose lowest frequency for low power consumption. + * While this will cause louder noise due to rather coarse frequency, + * it should never matter since output should always + * get disabled properly when idle anyway. */ + snd_azf3328_codec_setfmt(chip, reg, AZF_FREQ_4000, 8, 1); +} + +static inline void +snd_azf3328_codec_enable(struct snd_azf3328 *chip, int enable) +{ + /* no idea what exactly is being done here, but I strongly assume it's + * PM related */ + snd_azf3328_io_reg_setw( + chip->codec_io+IDX_IO_6AH, + IO_6A_PAUSE_PLAYBACK_BIT8, + !enable + ); +} + +static void +snd_azf3328_codec_activity(struct snd_azf3328 *chip, + enum snd_azf3328_stream_index stream_type, + int enable +) +{ + int need_change = (chip->audio_stream[stream_type].running != enable); + + snd_azf3328_dbgplay( + "codec_activity: type %d, enable %d, need_change %d\n", + stream_type, enable, need_change + ); + if (need_change) { + enum snd_azf3328_stream_index other = + (stream_type == AZF_PLAYBACK) ? + AZF_CAPTURE : AZF_PLAYBACK; + /* small check to prevent shutting down the other party + * in case it's active */ + if ((enable) || !(chip->audio_stream[other].running)) + snd_azf3328_codec_enable(chip, enable); + + /* ...and adjust clock, too + * (reduce noise and power consumption) */ + if (!enable) + snd_azf3328_codec_setfmt_lowpower( + chip, + chip->audio_stream[stream_type].portbase + + IDX_IO_PLAY_SOUNDFORMAT + ); + } + chip->audio_stream[stream_type].running = enable; +} + static void snd_azf3328_setdmaa(struct snd_azf3328 *chip, long unsigned int addr, unsigned int count, unsigned int size, - int do_recording) + enum snd_azf3328_stream_index stream_type +) { - unsigned long flags, portbase; - unsigned int is_running; - snd_azf3328_dbgcallenter(); - if (do_recording) { - /* access capture registers, i.e. skip playback reg section */ - portbase = chip->codec_port + 0x20; - is_running = chip->is_recording; - } else { - /* access the playback register section */ - portbase = chip->codec_port + 0x00; - is_running = chip->is_playing; - } + if (!chip->audio_stream[stream_type].running) { + /* AZF3328 uses a two buffer pointer DMA playback approach */ + + unsigned long flags, portbase, addr_area2; + + /* width 32bit (prevent overflow): */ + unsigned long count_areas, count_tmp; - /* AZF3328 uses a two buffer pointer DMA playback approach */ - if (!is_running) { - unsigned long addr_area2; - unsigned long count_areas, count_tmp; /* width 32bit -- overflow!! */ + portbase = chip->audio_stream[stream_type].portbase; count_areas = size/2; addr_area2 = addr+count_areas; count_areas--; /* max. index */ @@ -884,11 +1050,11 @@ snd_azf3328_playback_prepare(struct snd_pcm_substream *substream) snd_azf3328_dbgcallenter(); #if 0 - snd_azf3328_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT, + snd_azf3328_codec_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT, runtime->rate, snd_pcm_format_width(runtime->format), runtime->channels); - snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, 0); + snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, AZF_PLAYBACK); #endif snd_azf3328_dbgcallleave(); return 0; @@ -906,11 +1072,11 @@ snd_azf3328_capture_prepare(struct snd_pcm_substream *substream) snd_azf3328_dbgcallenter(); #if 0 - snd_azf3328_setfmt(chip, IDX_IO_REC_SOUNDFORMAT, + snd_azf3328_codec_setfmt(chip, IDX_IO_REC_SOUNDFORMAT, runtime->rate, snd_pcm_format_width(runtime->format), runtime->channels); - snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, 1); + snd_azf3328_setdmaa(chip, runtime->dma_addr, count, size, AZF_CAPTURE); #endif snd_azf3328_dbgcallleave(); return 0; @@ -923,6 +1089,7 @@ snd_azf3328_playback_trigger(struct snd_pcm_substream *substream, int cmd) struct snd_pcm_runtime *runtime = substream->runtime; int result = 0; unsigned int status1; + int previously_muted; snd_azf3328_dbgcalls("snd_azf3328_playback_trigger cmd %d\n", cmd); @@ -930,20 +1097,23 @@ snd_azf3328_playback_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_START: snd_azf3328_dbgplay("START PLAYBACK\n"); - /* mute WaveOut */ - snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1); + /* mute WaveOut (avoid clicking during setup) */ + previously_muted = + snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1); - snd_azf3328_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT, + snd_azf3328_codec_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT, runtime->rate, snd_pcm_format_width(runtime->format), runtime->channels); spin_lock(&chip->reg_lock); - /* stop playback */ + /* first, remember current value: */ status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS); + + /* stop playback */ status1 &= ~DMA_RESUME; snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); - + /* FIXME: clear interrupts or what??? */ snd_azf3328_codec_outw(chip, IDX_IO_PLAY_IRQTYPE, 0xffff); spin_unlock(&chip->reg_lock); @@ -951,7 +1121,7 @@ snd_azf3328_playback_trigger(struct snd_pcm_substream *substream, int cmd) snd_azf3328_setdmaa(chip, runtime->dma_addr, snd_pcm_lib_period_bytes(substream), snd_pcm_lib_buffer_bytes(substream), - 0); + AZF_PLAYBACK); spin_lock(&chip->reg_lock); #ifdef WIN9X @@ -978,30 +1148,35 @@ snd_azf3328_playback_trigger(struct snd_pcm_substream *substream, int cmd) DMA_SOMETHING_ELSE); #endif spin_unlock(&chip->reg_lock); + snd_azf3328_codec_activity(chip, AZF_PLAYBACK, 1); /* now unmute WaveOut */ - snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0); + if (!previously_muted) + snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0); - chip->is_playing = 1; snd_azf3328_dbgplay("STARTED PLAYBACK\n"); break; case SNDRV_PCM_TRIGGER_RESUME: snd_azf3328_dbgplay("RESUME PLAYBACK\n"); /* resume playback if we were active */ - if (chip->is_playing) + spin_lock(&chip->reg_lock); + if (chip->audio_stream[AZF_PLAYBACK].running) snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS) | DMA_RESUME); + spin_unlock(&chip->reg_lock); break; case SNDRV_PCM_TRIGGER_STOP: snd_azf3328_dbgplay("STOP PLAYBACK\n"); - /* mute WaveOut */ - snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1); + /* mute WaveOut (avoid clicking during setup) */ + previously_muted = + snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1); spin_lock(&chip->reg_lock); - /* stop playback */ + /* first, remember current value: */ status1 = snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS); + /* stop playback */ status1 &= ~DMA_RESUME; snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); @@ -1013,10 +1188,12 @@ snd_azf3328_playback_trigger(struct snd_pcm_substream *substream, int cmd) status1 &= ~DMA_PLAY_SOMETHING1; snd_azf3328_codec_outw(chip, IDX_IO_PLAY_FLAGS, status1); spin_unlock(&chip->reg_lock); - + snd_azf3328_codec_activity(chip, AZF_PLAYBACK, 0); + /* now unmute WaveOut */ - snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0); - chip->is_playing = 0; + if (!previously_muted) + snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 0); + snd_azf3328_dbgplay("STOPPED PLAYBACK\n"); break; case SNDRV_PCM_TRIGGER_SUSPEND: @@ -1035,7 +1212,7 @@ snd_azf3328_playback_trigger(struct snd_pcm_substream *substream, int cmd) printk(KERN_ERR "FIXME: unknown trigger mode!\n"); return -EINVAL; } - + snd_azf3328_dbgcallleave(); return result; } @@ -1057,17 +1234,19 @@ snd_azf3328_capture_trigger(struct snd_pcm_substream *substream, int cmd) snd_azf3328_dbgplay("START CAPTURE\n"); - snd_azf3328_setfmt(chip, IDX_IO_REC_SOUNDFORMAT, + snd_azf3328_codec_setfmt(chip, IDX_IO_REC_SOUNDFORMAT, runtime->rate, snd_pcm_format_width(runtime->format), runtime->channels); spin_lock(&chip->reg_lock); - /* stop recording */ + /* first, remember current value: */ status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS); + + /* stop recording */ status1 &= ~DMA_RESUME; snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); - + /* FIXME: clear interrupts or what??? */ snd_azf3328_codec_outw(chip, IDX_IO_REC_IRQTYPE, 0xffff); spin_unlock(&chip->reg_lock); @@ -1075,7 +1254,7 @@ snd_azf3328_capture_trigger(struct snd_pcm_substream *substream, int cmd) snd_azf3328_setdmaa(chip, runtime->dma_addr, snd_pcm_lib_period_bytes(substream), snd_pcm_lib_buffer_bytes(substream), - 1); + AZF_CAPTURE); spin_lock(&chip->reg_lock); #ifdef WIN9X @@ -1102,24 +1281,27 @@ snd_azf3328_capture_trigger(struct snd_pcm_substream *substream, int cmd) DMA_SOMETHING_ELSE); #endif spin_unlock(&chip->reg_lock); + snd_azf3328_codec_activity(chip, AZF_CAPTURE, 1); - chip->is_recording = 1; snd_azf3328_dbgplay("STARTED CAPTURE\n"); break; case SNDRV_PCM_TRIGGER_RESUME: snd_azf3328_dbgplay("RESUME CAPTURE\n"); /* resume recording if we were active */ - if (chip->is_recording) + spin_lock(&chip->reg_lock); + if (chip->audio_stream[AZF_CAPTURE].running) snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS) | DMA_RESUME); + spin_unlock(&chip->reg_lock); break; case SNDRV_PCM_TRIGGER_STOP: snd_azf3328_dbgplay("STOP CAPTURE\n"); spin_lock(&chip->reg_lock); - /* stop recording */ + /* first, remember current value: */ status1 = snd_azf3328_codec_inw(chip, IDX_IO_REC_FLAGS); + /* stop recording */ status1 &= ~DMA_RESUME; snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); @@ -1129,8 +1311,8 @@ snd_azf3328_capture_trigger(struct snd_pcm_substream *substream, int cmd) status1 &= ~DMA_PLAY_SOMETHING1; snd_azf3328_codec_outw(chip, IDX_IO_REC_FLAGS, status1); spin_unlock(&chip->reg_lock); - - chip->is_recording = 0; + snd_azf3328_codec_activity(chip, AZF_CAPTURE, 0); + snd_azf3328_dbgplay("STOPPED CAPTURE\n"); break; case SNDRV_PCM_TRIGGER_SUSPEND: @@ -1149,7 +1331,7 @@ snd_azf3328_capture_trigger(struct snd_pcm_substream *substream, int cmd) printk(KERN_ERR "FIXME: unknown trigger mode!\n"); return -EINVAL; } - + snd_azf3328_dbgcallleave(); return result; } @@ -1162,11 +1344,11 @@ snd_azf3328_playback_pointer(struct snd_pcm_substream *substream) snd_pcm_uframes_t frmres; #ifdef QUERY_HARDWARE - bufptr = inl(chip->codec_port+IDX_IO_PLAY_DMA_START_1); + bufptr = snd_azf3328_codec_inl(chip, IDX_IO_PLAY_DMA_START_1); #else bufptr = substream->runtime->dma_addr; #endif - result = inl(chip->codec_port+IDX_IO_PLAY_DMA_CURRPOS); + result = snd_azf3328_codec_inl(chip, IDX_IO_PLAY_DMA_CURRPOS); /* calculate offset */ result -= bufptr; @@ -1183,11 +1365,11 @@ snd_azf3328_capture_pointer(struct snd_pcm_substream *substream) snd_pcm_uframes_t frmres; #ifdef QUERY_HARDWARE - bufptr = inl(chip->codec_port+IDX_IO_REC_DMA_START_1); + bufptr = snd_azf3328_codec_inl(chip, IDX_IO_REC_DMA_START_1); #else bufptr = substream->runtime->dma_addr; #endif - result = inl(chip->codec_port+IDX_IO_REC_DMA_CURRPOS); + result = snd_azf3328_codec_inl(chip, IDX_IO_REC_DMA_CURRPOS); /* calculate offset */ result -= bufptr; @@ -1196,27 +1378,233 @@ snd_azf3328_capture_pointer(struct snd_pcm_substream *substream) return frmres; } +/******************************************************************/ + +#ifdef SUPPORT_GAMEPORT +static inline void +snd_azf3328_gameport_irq_enable(struct snd_azf3328 *chip, int enable) +{ + snd_azf3328_io_reg_setb( + chip->game_io+IDX_GAME_HWCONFIG, + GAME_HWCFG_IRQ_ENABLE, + enable + ); +} + +static inline void +snd_azf3328_gameport_legacy_address_enable(struct snd_azf3328 *chip, int enable) +{ + snd_azf3328_io_reg_setb( + chip->game_io+IDX_GAME_HWCONFIG, + GAME_HWCFG_LEGACY_ADDRESS_ENABLE, + enable + ); +} + +static inline void +snd_azf3328_gameport_axis_circuit_enable(struct snd_azf3328 *chip, int enable) +{ + snd_azf3328_io_reg_setw( + chip->codec_io+IDX_IO_6AH, + IO_6A_SOMETHING2_GAMEPORT, + !enable + ); +} + +static inline void +snd_azf3328_gameport_interrupt(struct snd_azf3328 *chip) +{ + /* + * skeleton handler only + * (we do not want axis reading in interrupt handler - too much load!) + */ + snd_azf3328_dbggame("gameport irq\n"); + + /* this should ACK the gameport IRQ properly, hopefully. */ + snd_azf3328_game_inw(chip, IDX_GAME_AXIS_VALUE); +} + +static int +snd_azf3328_gameport_open(struct gameport *gameport, int mode) +{ + struct snd_azf3328 *chip = gameport_get_port_data(gameport); + int res; + + snd_azf3328_dbggame("gameport_open, mode %d\n", mode); + switch (mode) { + case GAMEPORT_MODE_COOKED: + case GAMEPORT_MODE_RAW: + res = 0; + break; + default: + res = -1; + break; + } + + snd_azf3328_gameport_axis_circuit_enable(chip, (res == 0)); + + return res; +} + +static void +snd_azf3328_gameport_close(struct gameport *gameport) +{ + struct snd_azf3328 *chip = gameport_get_port_data(gameport); + + snd_azf3328_dbggame("gameport_close\n"); + snd_azf3328_gameport_axis_circuit_enable(chip, 0); +} + +static int +snd_azf3328_gameport_cooked_read(struct gameport *gameport, + int *axes, + int *buttons +) +{ + struct snd_azf3328 *chip = gameport_get_port_data(gameport); + int i; + u8 val; + unsigned long flags; + + snd_assert(chip, return 0); + + spin_lock_irqsave(&chip->reg_lock, flags); + val = snd_azf3328_game_inb(chip, IDX_GAME_LEGACY_COMPATIBLE); + *buttons = (~(val) >> 4) & 0xf; + + /* ok, this one is a bit dirty: cooked_read is being polled by a timer, + * thus we're atomic and cannot actively wait in here + * (which would be useful for us since it probably would be better + * to trigger a measurement in here, then wait a short amount of + * time until it's finished, then read values of _this_ measurement). + * + * Thus we simply resort to reading values if they're available already + * and trigger the next measurement. + */ + + val = snd_azf3328_game_inb(chip, IDX_GAME_AXES_CONFIG); + if (val & GAME_AXES_SAMPLING_READY) { + for (i = 0; i < 4; ++i) { + /* configure the axis to read */ + val = (i << 4) | 0x0f; + snd_azf3328_game_outb(chip, IDX_GAME_AXES_CONFIG, val); + + chip->axes[i] = snd_azf3328_game_inw( + chip, IDX_GAME_AXIS_VALUE + ); + } + } + + /* trigger next axes sampling, to be evaluated the next time we + * enter this function */ + + /* for some very, very strange reason we cannot enable + * Measurement Ready monitoring for all axes here, + * at least not when only one joystick connected */ + val = 0x03; /* we're able to monitor axes 1 and 2 only */ + snd_azf3328_game_outb(chip, IDX_GAME_AXES_CONFIG, val); + + snd_azf3328_game_outw(chip, IDX_GAME_AXIS_VALUE, 0xffff); + spin_unlock_irqrestore(&chip->reg_lock, flags); + + for (i = 0; i < 4; i++) { + axes[i] = chip->axes[i]; + if (axes[i] == 0xffff) + axes[i] = -1; + } + + snd_azf3328_dbggame("cooked_read: axes %d %d %d %d buttons %d\n", + axes[0], axes[1], axes[2], axes[3], *buttons + ); + + return 0; +} + +static int __devinit +snd_azf3328_gameport(struct snd_azf3328 *chip, int dev) +{ + struct gameport *gp; + + int io_port = chip->game_io; + + chip->gameport = gp = gameport_allocate_port(); + if (!gp) { + printk(KERN_ERR "azt3328: cannot alloc memory for gameport\n"); + return -ENOMEM; + } + + gameport_set_name(gp, "AZF3328 Gameport"); + gameport_set_phys(gp, "pci%s/gameport0", pci_name(chip->pci)); + gameport_set_dev_parent(gp, &chip->pci->dev); + gp->io = io_port; + gameport_set_port_data(gp, chip); + + gp->open = snd_azf3328_gameport_open; + gp->close = snd_azf3328_gameport_close; + gp->fuzz = 16; /* seems ok */ + gp->cooked_read = snd_azf3328_gameport_cooked_read; + + /* DISABLE legacy address: we don't need it! */ + snd_azf3328_gameport_legacy_address_enable(chip, 0); + + snd_azf3328_gameport_axis_circuit_enable(chip, 0); + + gameport_register_port(chip->gameport); + + return 0; +} + +static void +snd_azf3328_gameport_free(struct snd_azf3328 *chip) +{ + if (chip->gameport) { + gameport_unregister_port(chip->gameport); + chip->gameport = NULL; + } + snd_azf3328_gameport_irq_enable(chip, 0); +} +#else +static inline int +snd_azf3328_gameport(struct snd_azf3328 *chip, int dev) { return -ENOSYS; } +static inline void +snd_azf3328_gameport_free(struct snd_azf3328 *chip) { } +static inline void +snd_azf3328_gameport_interrupt(struct snd_azf3328 *chip) +{ + printk(KERN_WARNING "huh, game port IRQ occurred!?\n"); +} +#endif /* SUPPORT_GAMEPORT */ + +/******************************************************************/ + static irqreturn_t snd_azf3328_interrupt(int irq, void *dev_id) { struct snd_azf3328 *chip = dev_id; u8 status, which; +#if DEBUG_PLAY_REC static unsigned long irq_count; +#endif status = snd_azf3328_codec_inb(chip, IDX_IO_IRQSTATUS); /* fast path out, to ease interrupt sharing */ - if (!(status & (IRQ_PLAYBACK|IRQ_RECORDING|IRQ_MPU401|IRQ_TIMER))) + if (!(status & + (IRQ_PLAYBACK|IRQ_RECORDING|IRQ_GAMEPORT|IRQ_MPU401|IRQ_TIMER) + )) return IRQ_NONE; /* must be interrupt for another device */ snd_azf3328_dbgplay("Interrupt %ld!\nIDX_IO_PLAY_FLAGS %04x, IDX_IO_PLAY_IRQTYPE %04x, IDX_IO_IRQSTATUS %04x\n", - irq_count, + irq_count++ /* debug-only */, snd_azf3328_codec_inw(chip, IDX_IO_PLAY_FLAGS), snd_azf3328_codec_inw(chip, IDX_IO_PLAY_IRQTYPE), status); - + if (status & IRQ_TIMER) { - /* snd_azf3328_dbgplay("timer %ld\n", inl(chip->codec_port+IDX_IO_TIMER_VALUE) & TIMER_VALUE_MASK); */ + /* snd_azf3328_dbgplay("timer %ld\n", + snd_azf3328_codec_inl(chip, IDX_IO_TIMER_VALUE) + & TIMER_VALUE_MASK + ); */ if (chip->timer) snd_timer_interrupt(chip->timer, chip->timer->sticks); /* ACK timer */ @@ -1232,11 +1620,16 @@ snd_azf3328_interrupt(int irq, void *dev_id) snd_azf3328_codec_outb(chip, IDX_IO_PLAY_IRQTYPE, which); spin_unlock(&chip->reg_lock); - if (chip->pcm && chip->playback_substream) { - snd_pcm_period_elapsed(chip->playback_substream); + if (chip->pcm && chip->audio_stream[AZF_PLAYBACK].substream) { + snd_pcm_period_elapsed( + chip->audio_stream[AZF_PLAYBACK].substream + ); snd_azf3328_dbgplay("PLAY period done (#%x), @ %x\n", which, - inl(chip->codec_port+IDX_IO_PLAY_DMA_CURRPOS)); + snd_azf3328_codec_inl( + chip, IDX_IO_PLAY_DMA_CURRPOS + ) + ); } else snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n"); if (which & IRQ_PLAY_SOMETHING) @@ -1249,16 +1642,23 @@ snd_azf3328_interrupt(int irq, void *dev_id) snd_azf3328_codec_outb(chip, IDX_IO_REC_IRQTYPE, which); spin_unlock(&chip->reg_lock); - if (chip->pcm && chip->capture_substream) { - snd_pcm_period_elapsed(chip->capture_substream); + if (chip->pcm && chip->audio_stream[AZF_CAPTURE].substream) { + snd_pcm_period_elapsed( + chip->audio_stream[AZF_CAPTURE].substream + ); snd_azf3328_dbgplay("REC period done (#%x), @ %x\n", which, - inl(chip->codec_port+IDX_IO_REC_DMA_CURRPOS)); + snd_azf3328_codec_inl( + chip, IDX_IO_REC_DMA_CURRPOS + ) + ); } else snd_azf3328_dbgplay("azt3328: ouch, irq handler problem!\n"); if (which & IRQ_REC_SOMETHING) snd_azf3328_dbgplay("azt3328: unknown rec IRQ type occurred, please report!\n"); } + if (status & IRQ_GAMEPORT) + snd_azf3328_gameport_interrupt(chip); /* MPU401 has less critical IRQ requirements * than timer and playback/recording, right? */ if (status & IRQ_MPU401) { @@ -1268,7 +1668,6 @@ snd_azf3328_interrupt(int irq, void *dev_id) * If so, then I don't know how... */ snd_azf3328_dbgplay("azt3328: MPU401 IRQ\n"); } - irq_count++; return IRQ_HANDLED; } @@ -1287,8 +1686,8 @@ static const struct snd_pcm_hardware snd_azf3328_playback = .rates = SNDRV_PCM_RATE_5512 | SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_KNOT, - .rate_min = 4000, - .rate_max = 66200, + .rate_min = AZF_FREQ_4000, + .rate_max = AZF_FREQ_66200, .channels_min = 1, .channels_max = 2, .buffer_bytes_max = 65536, @@ -1315,8 +1714,8 @@ static const struct snd_pcm_hardware snd_azf3328_capture = .rates = SNDRV_PCM_RATE_5512 | SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_KNOT, - .rate_min = 4000, - .rate_max = 66200, + .rate_min = AZF_FREQ_4000, + .rate_max = AZF_FREQ_66200, .channels_min = 1, .channels_max = 2, .buffer_bytes_max = 65536, @@ -1329,10 +1728,24 @@ static const struct snd_pcm_hardware snd_azf3328_capture = static unsigned int snd_azf3328_fixed_rates[] = { - 4000, 4800, 5512, 6620, 8000, 9600, 11025, 13240, 16000, 22050, 32000, - 44100, 48000, 66200 }; + AZF_FREQ_4000, + AZF_FREQ_4800, + AZF_FREQ_5512, + AZF_FREQ_6620, + AZF_FREQ_8000, + AZF_FREQ_9600, + AZF_FREQ_11025, + AZF_FREQ_13240, + AZF_FREQ_16000, + AZF_FREQ_22050, + AZF_FREQ_32000, + AZF_FREQ_44100, + AZF_FREQ_48000, + AZF_FREQ_66200 +}; + static struct snd_pcm_hw_constraint_list snd_azf3328_hw_constraints_rates = { - .count = ARRAY_SIZE(snd_azf3328_fixed_rates), + .count = ARRAY_SIZE(snd_azf3328_fixed_rates), .list = snd_azf3328_fixed_rates, .mask = 0, }; @@ -1346,7 +1759,7 @@ snd_azf3328_playback_open(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; snd_azf3328_dbgcallenter(); - chip->playback_substream = substream; + chip->audio_stream[AZF_PLAYBACK].substream = substream; runtime->hw = snd_azf3328_playback; snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &snd_azf3328_hw_constraints_rates); @@ -1361,7 +1774,7 @@ snd_azf3328_capture_open(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; snd_azf3328_dbgcallenter(); - chip->capture_substream = substream; + chip->audio_stream[AZF_CAPTURE].substream = substream; runtime->hw = snd_azf3328_capture; snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &snd_azf3328_hw_constraints_rates); @@ -1375,7 +1788,7 @@ snd_azf3328_playback_close(struct snd_pcm_substream *substream) struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); snd_azf3328_dbgcallenter(); - chip->playback_substream = NULL; + chip->audio_stream[AZF_PLAYBACK].substream = NULL; snd_azf3328_dbgcallleave(); return 0; } @@ -1386,7 +1799,7 @@ snd_azf3328_capture_close(struct snd_pcm_substream *substream) struct snd_azf3328 *chip = snd_pcm_substream_chip(substream); snd_azf3328_dbgcallenter(); - chip->capture_substream = NULL; + chip->audio_stream[AZF_CAPTURE].substream = NULL; snd_azf3328_dbgcallleave(); return 0; } @@ -1441,102 +1854,8 @@ snd_azf3328_pcm(struct snd_azf3328 *chip, int device) /******************************************************************/ -#ifdef SUPPORT_JOYSTICK -static int __devinit -snd_azf3328_config_joystick(struct snd_azf3328 *chip, int dev) -{ - struct gameport *gp; - struct resource *r; - - if (!joystick[dev]) - return -ENODEV; - - if (!(r = request_region(0x200, 8, "AZF3328 gameport"))) { - printk(KERN_WARNING "azt3328: cannot reserve joystick ports\n"); - return -EBUSY; - } - - chip->gameport = gp = gameport_allocate_port(); - if (!gp) { - printk(KERN_ERR "azt3328: cannot allocate memory for gameport\n"); - release_and_free_resource(r); - return -ENOMEM; - } - - gameport_set_name(gp, "AZF3328 Gameport"); - gameport_set_phys(gp, "pci%s/gameport0", pci_name(chip->pci)); - gameport_set_dev_parent(gp, &chip->pci->dev); - gp->io = 0x200; - gameport_set_port_data(gp, r); - - snd_azf3328_io2_outb(chip, IDX_IO2_LEGACY_ADDR, - snd_azf3328_io2_inb(chip, IDX_IO2_LEGACY_ADDR) | LEGACY_JOY); - - gameport_register_port(chip->gameport); - - return 0; -} - -static void -snd_azf3328_free_joystick(struct snd_azf3328 *chip) -{ - if (chip->gameport) { - struct resource *r = gameport_get_port_data(chip->gameport); - - gameport_unregister_port(chip->gameport); - chip->gameport = NULL; - /* disable gameport */ - snd_azf3328_io2_outb(chip, IDX_IO2_LEGACY_ADDR, - snd_azf3328_io2_inb(chip, IDX_IO2_LEGACY_ADDR) & ~LEGACY_JOY); - release_and_free_resource(r); - } -} -#else -static inline int -snd_azf3328_config_joystick(struct snd_azf3328 *chip, int dev) { return -ENOSYS; } -static inline void -snd_azf3328_free_joystick(struct snd_azf3328 *chip) { } -#endif - -/******************************************************************/ - -static int -snd_azf3328_free(struct snd_azf3328 *chip) -{ - if (chip->irq < 0) - goto __end_hw; - - /* reset (close) mixer */ - snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1); /* first mute master volume */ - snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000); - - /* interrupt setup - mask everything (FIXME!) */ - /* well, at least we know how to disable the timer IRQ */ - snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x00); - - if (chip->irq >= 0) - synchronize_irq(chip->irq); -__end_hw: - snd_azf3328_free_joystick(chip); - if (chip->irq >= 0) - free_irq(chip->irq, chip); - pci_release_regions(chip->pci); - pci_disable_device(chip->pci); - - kfree(chip); - return 0; -} - -static int -snd_azf3328_dev_free(struct snd_device *device) -{ - struct snd_azf3328 *chip = device->device_data; - return snd_azf3328_free(chip); -} - -/******************************************************************/ - -/*** NOTE: the physical timer resolution actually is 1024000 ticks per second, +/*** NOTE: the physical timer resolution actually is 1024000 ticks per second + *** (probably derived from main crystal via a divider of 24), *** but announcing those attributes to user-space would make programs *** configure the timer to a 1 tick value, resulting in an absolutely fatal *** timer IRQ storm. @@ -1564,7 +1883,7 @@ snd_azf3328_timer_start(struct snd_timer *timer) delay = 49; /* minimum time is 49 ticks */ } snd_azf3328_dbgtimer("setting timer countdown value %d, add COUNTDOWN|IRQ\n", delay); - delay |= TIMER_ENABLE_COUNTDOWN | TIMER_ENABLE_IRQ; + delay |= TIMER_COUNTDOWN_ENABLE | TIMER_IRQ_ENABLE; spin_lock_irqsave(&chip->reg_lock, flags); snd_azf3328_codec_outl(chip, IDX_IO_TIMER_VALUE, delay); spin_unlock_irqrestore(&chip->reg_lock, flags); @@ -1582,7 +1901,7 @@ snd_azf3328_timer_stop(struct snd_timer *timer) chip = snd_timer_chip(timer); spin_lock_irqsave(&chip->reg_lock, flags); /* disable timer countdown and interrupt */ - /* FIXME: should we write TIMER_ACK_IRQ here? */ + /* FIXME: should we write TIMER_IRQ_ACK here? */ snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0); spin_unlock_irqrestore(&chip->reg_lock, flags); snd_azf3328_dbgcallleave(); @@ -1626,9 +1945,10 @@ snd_azf3328_timer(struct snd_azf3328 *chip, int device) snd_azf3328_timer_hw.resolution *= seqtimer_scaling; snd_azf3328_timer_hw.ticks /= seqtimer_scaling; - if ((err = snd_timer_new(chip->card, "AZF3328", &tid, &timer)) < 0) { + + err = snd_timer_new(chip->card, "AZF3328", &tid, &timer); + if (err < 0) goto out; - } strcpy(timer->name, "AZF3328 timer"); timer->private_data = chip; @@ -1636,6 +1956,8 @@ snd_azf3328_timer(struct snd_azf3328 *chip, int device) chip->timer = timer; + snd_azf3328_timer_stop(timer); + err = 0; out: @@ -1645,10 +1967,44 @@ out: /******************************************************************/ +static int +snd_azf3328_free(struct snd_azf3328 *chip) +{ + if (chip->irq < 0) + goto __end_hw; + + /* reset (close) mixer: + * first mute master volume, then reset + */ + snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1); + snd_azf3328_mixer_outw(chip, IDX_MIXER_RESET, 0x0000); + + snd_azf3328_timer_stop(chip->timer); + snd_azf3328_gameport_free(chip); + + if (chip->irq >= 0) + synchronize_irq(chip->irq); +__end_hw: + if (chip->irq >= 0) + free_irq(chip->irq, chip); + pci_release_regions(chip->pci); + pci_disable_device(chip->pci); + + kfree(chip); + return 0; +} + +static int +snd_azf3328_dev_free(struct snd_device *device) +{ + struct snd_azf3328 *chip = device->device_data; + return snd_azf3328_free(chip); +} + #if 0 /* check whether a bit can be modified */ static void -snd_azf3328_test_bit(unsigned int reg, int bit) +snd_azf3328_test_bit(unsigned unsigned reg, int bit) { unsigned char val, valoff, valon; @@ -1659,42 +2015,74 @@ snd_azf3328_test_bit(unsigned int reg, int bit) outb(val|(1 << bit), reg); valon = inb(reg); - + outb(val, reg); - printk(KERN_ERR "reg %04x bit %d: %02x %02x %02x\n", reg, bit, val, valoff, valon); + printk(KERN_ERR "reg %04x bit %d: %02x %02x %02x\n", + reg, bit, val, valoff, valon + ); } #endif -#if DEBUG_MISC -static void +static inline void snd_azf3328_debug_show_ports(const struct snd_azf3328 *chip) { +#if DEBUG_MISC u16 tmp; - snd_azf3328_dbgmisc("codec_port 0x%lx, io2_port 0x%lx, mpu_port 0x%lx, synth_port 0x%lx, mixer_port 0x%lx, irq %d\n", chip->codec_port, chip->io2_port, chip->mpu_port, chip->synth_port, chip->mixer_port, chip->irq); - - snd_azf3328_dbgmisc("io2 %02x %02x %02x %02x %02x %02x\n", snd_azf3328_io2_inb(chip, 0), snd_azf3328_io2_inb(chip, 1), snd_azf3328_io2_inb(chip, 2), snd_azf3328_io2_inb(chip, 3), snd_azf3328_io2_inb(chip, 4), snd_azf3328_io2_inb(chip, 5)); - - for (tmp=0; tmp <= 0x01; tmp += 1) - snd_azf3328_dbgmisc("0x%02x: opl 0x%04x, mpu300 0x%04x, mpu310 0x%04x, mpu320 0x%04x, mpu330 0x%04x\n", tmp, inb(0x388 + tmp), inb(0x300 + tmp), inb(0x310 + tmp), inb(0x320 + tmp), inb(0x330 + tmp)); + snd_azf3328_dbgmisc( + "codec_io 0x%lx, game_io 0x%lx, mpu_io 0x%lx, " + "opl3_io 0x%lx, mixer_io 0x%lx, irq %d\n", + chip->codec_io, chip->game_io, chip->mpu_io, + chip->opl3_io, chip->mixer_io, chip->irq + ); + + snd_azf3328_dbgmisc("game %02x %02x %02x %02x %02x %02x\n", + snd_azf3328_game_inb(chip, 0), + snd_azf3328_game_inb(chip, 1), + snd_azf3328_game_inb(chip, 2), + snd_azf3328_game_inb(chip, 3), + snd_azf3328_game_inb(chip, 4), + snd_azf3328_game_inb(chip, 5) + ); + + for (tmp = 0; tmp < 0x07; tmp += 1) + snd_azf3328_dbgmisc("mpu_io 0x%04x\n", inb(chip->mpu_io + tmp)); + + for (tmp = 0; tmp <= 0x07; tmp += 1) + snd_azf3328_dbgmisc("0x%02x: game200 0x%04x, game208 0x%04x\n", + tmp, inb(0x200 + tmp), inb(0x208 + tmp)); + + for (tmp = 0; tmp <= 0x01; tmp += 1) + snd_azf3328_dbgmisc( + "0x%02x: mpu300 0x%04x, mpu310 0x%04x, mpu320 0x%04x, " + "mpu330 0x%04x opl388 0x%04x opl38c 0x%04x\n", + tmp, + inb(0x300 + tmp), + inb(0x310 + tmp), + inb(0x320 + tmp), + inb(0x330 + tmp), + inb(0x388 + tmp), + inb(0x38c + tmp) + ); for (tmp = 0; tmp < AZF_IO_SIZE_CODEC; tmp += 2) - snd_azf3328_dbgmisc("codec 0x%02x: 0x%04x\n", tmp, snd_azf3328_codec_inw(chip, tmp)); + snd_azf3328_dbgmisc("codec 0x%02x: 0x%04x\n", + tmp, snd_azf3328_codec_inw(chip, tmp) + ); for (tmp = 0; tmp < AZF_IO_SIZE_MIXER; tmp += 2) - snd_azf3328_dbgmisc("mixer 0x%02x: 0x%04x\n", tmp, snd_azf3328_mixer_inw(chip, tmp)); + snd_azf3328_dbgmisc("mixer 0x%02x: 0x%04x\n", + tmp, snd_azf3328_mixer_inw(chip, tmp) + ); +#endif /* DEBUG_MISC */ } -#else -static inline void -snd_azf3328_debug_show_ports(const struct snd_azf3328 *chip) {} -#endif static int __devinit snd_azf3328_create(struct snd_card *card, - struct pci_dev *pci, - unsigned long device_type, - struct snd_azf3328 ** rchip) + struct pci_dev *pci, + unsigned long device_type, + struct snd_azf3328 **rchip) { struct snd_azf3328 *chip; int err; @@ -1705,7 +2093,8 @@ snd_azf3328_create(struct snd_card *card, *rchip = NULL; - if ((err = pci_enable_device(pci)) < 0) + err = pci_enable_device(pci); + if (err < 0) return err; chip = kzalloc(sizeof(*chip), GFP_KERNEL); @@ -1721,20 +2110,25 @@ snd_azf3328_create(struct snd_card *card, /* check if we can restrict PCI DMA transfers to 24 bits */ if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 || pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) { - snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n"); + snd_printk(KERN_ERR "architecture does not support " + "24bit PCI busmaster DMA\n" + ); err = -ENXIO; goto out_err; } - if ((err = pci_request_regions(pci, "Aztech AZF3328")) < 0) { + err = pci_request_regions(pci, "Aztech AZF3328"); + if (err < 0) goto out_err; - } - chip->codec_port = pci_resource_start(pci, 0); - chip->io2_port = pci_resource_start(pci, 1); - chip->mpu_port = pci_resource_start(pci, 2); - chip->synth_port = pci_resource_start(pci, 3); - chip->mixer_port = pci_resource_start(pci, 4); + chip->codec_io = pci_resource_start(pci, 0); + chip->game_io = pci_resource_start(pci, 1); + chip->mpu_io = pci_resource_start(pci, 2); + chip->opl3_io = pci_resource_start(pci, 3); + chip->mixer_io = pci_resource_start(pci, 4); + + chip->audio_stream[AZF_PLAYBACK].portbase = chip->codec_io + 0x00; + chip->audio_stream[AZF_CAPTURE].portbase = chip->codec_io + 0x20; if (request_irq(pci->irq, snd_azf3328_interrupt, IRQF_SHARED, card->shortname, chip)) { @@ -1747,29 +2141,29 @@ snd_azf3328_create(struct snd_card *card, synchronize_irq(chip->irq); snd_azf3328_debug_show_ports(chip); - - if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) { + + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); + if (err < 0) goto out_err; - } /* create mixer interface & switches */ - if ((err = snd_azf3328_mixer_new(chip)) < 0) + err = snd_azf3328_mixer_new(chip); + if (err < 0) goto out_err; -#if 0 - /* set very low bitrate to reduce noise and power consumption? */ - snd_azf3328_setfmt(chip, IDX_IO_PLAY_SOUNDFORMAT, 5512, 8, 1); -#endif + /* shutdown codecs to save power */ + /* have snd_azf3328_codec_activity() act properly */ + chip->audio_stream[AZF_PLAYBACK].running = 1; + snd_azf3328_codec_activity(chip, AZF_PLAYBACK, 0); /* standard chip init stuff */ - /* default IRQ init value */ + /* default IRQ init value */ tmp = DMA_PLAY_SOMETHING2|DMA_EPILOGUE_SOMETHING|DMA_SOMETHING_ELSE; spin_lock_irq(&chip->reg_lock); snd_azf3328_codec_outb(chip, IDX_IO_PLAY_FLAGS, tmp); snd_azf3328_codec_outb(chip, IDX_IO_REC_FLAGS, tmp); snd_azf3328_codec_outb(chip, IDX_IO_SOMETHING_FLAGS, tmp); - snd_azf3328_codec_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x00); /* disable timer */ spin_unlock_irq(&chip->reg_lock); snd_card_set_dev(card, &pci->dev); @@ -1805,52 +2199,61 @@ snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) return -ENOENT; } - card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0 ); + card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0); if (card == NULL) return -ENOMEM; strcpy(card->driver, "AZF3328"); strcpy(card->shortname, "Aztech AZF3328 (PCI168)"); - if ((err = snd_azf3328_create(card, pci, pci_id->driver_data, &chip)) < 0) { + err = snd_azf3328_create(card, pci, pci_id->driver_data, &chip); + if (err < 0) goto out_err; - } card->private_data = chip; - if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_MPU401, - chip->mpu_port, MPU401_INFO_INTEGRATED, - pci->irq, 0, &chip->rmidi)) < 0) { - snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n", chip->mpu_port); + err = snd_mpu401_uart_new( + card, 0, MPU401_HW_MPU401, chip->mpu_io, MPU401_INFO_INTEGRATED, + pci->irq, 0, &chip->rmidi + ); + if (err < 0) { + snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n", + chip->mpu_io + ); goto out_err; } - if ((err = snd_azf3328_timer(chip, 0)) < 0) { + err = snd_azf3328_timer(chip, 0); + if (err < 0) goto out_err; - } - if ((err = snd_azf3328_pcm(chip, 0)) < 0) { + err = snd_azf3328_pcm(chip, 0); + if (err < 0) goto out_err; - } - if (snd_opl3_create(card, chip->synth_port, chip->synth_port+2, + if (snd_opl3_create(card, chip->opl3_io, chip->opl3_io+2, OPL3_HW_AUTO, 1, &opl3) < 0) { snd_printk(KERN_ERR "azf3328: no OPL3 device at 0x%lx-0x%lx?\n", - chip->synth_port, chip->synth_port+2 ); + chip->opl3_io, chip->opl3_io+2 + ); } else { - if ((err = snd_opl3_hwdep_new(opl3, 0, 1, NULL)) < 0) { + /* need to use IDs 1, 2 since ID 0 is snd_azf3328_timer above */ + err = snd_opl3_timer_new(opl3, 1, 2); + if (err < 0) + goto out_err; + err = snd_opl3_hwdep_new(opl3, 0, 1, NULL); + if (err < 0) goto out_err; - } } opl3->private_data = chip; sprintf(card->longname, "%s at 0x%lx, irq %i", - card->shortname, chip->codec_port, chip->irq); + card->shortname, chip->codec_io, chip->irq); - if ((err = snd_card_register(card)) < 0) { + err = snd_card_register(card); + if (err < 0) goto out_err; - } #ifdef MODULE printk( @@ -1861,19 +2264,18 @@ snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) 1024000 / seqtimer_scaling, seqtimer_scaling); #endif - if (snd_azf3328_config_joystick(chip, dev) < 0) - snd_azf3328_io2_outb(chip, IDX_IO2_LEGACY_ADDR, - snd_azf3328_io2_inb(chip, IDX_IO2_LEGACY_ADDR) & ~LEGACY_JOY); + snd_azf3328_gameport(chip, dev); pci_set_drvdata(pci, card); dev++; err = 0; goto out; - + out_err: + snd_printk(KERN_ERR "azf3328: something failed, exiting\n"); snd_card_free(card); - + out: snd_azf3328_dbgcallleave(); return err; @@ -1894,27 +2296,27 @@ snd_azf3328_suspend(struct pci_dev *pci, pm_message_t state) { struct snd_card *card = pci_get_drvdata(pci); struct snd_azf3328 *chip = card->private_data; - int reg; + unsigned reg; snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); - + snd_pcm_suspend_all(chip->pcm); - for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; reg++) - chip->saved_regs_mixer[reg] = inw(chip->mixer_port + reg * 2); + for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; ++reg) + chip->saved_regs_mixer[reg] = inw(chip->mixer_io + reg * 2); /* make sure to disable master volume etc. to prevent looping sound */ snd_azf3328_mixer_set_mute(chip, IDX_MIXER_PLAY_MASTER, 1); snd_azf3328_mixer_set_mute(chip, IDX_MIXER_WAVEOUT, 1); - - for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; reg++) - chip->saved_regs_codec[reg] = inw(chip->codec_port + reg * 2); - for (reg = 0; reg < AZF_IO_SIZE_IO2_PM / 2; reg++) - chip->saved_regs_io2[reg] = inw(chip->io2_port + reg * 2); - for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; reg++) - chip->saved_regs_mpu[reg] = inw(chip->mpu_port + reg * 2); - for (reg = 0; reg < AZF_IO_SIZE_SYNTH_PM / 2; reg++) - chip->saved_regs_synth[reg] = inw(chip->synth_port + reg * 2); + + for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; ++reg) + chip->saved_regs_codec[reg] = inw(chip->codec_io + reg * 2); + for (reg = 0; reg < AZF_IO_SIZE_GAME_PM / 2; ++reg) + chip->saved_regs_game[reg] = inw(chip->game_io + reg * 2); + for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; ++reg) + chip->saved_regs_mpu[reg] = inw(chip->mpu_io + reg * 2); + for (reg = 0; reg < AZF_IO_SIZE_OPL3_PM / 2; ++reg) + chip->saved_regs_opl3[reg] = inw(chip->opl3_io + reg * 2); pci_disable_device(pci); pci_save_state(pci); @@ -1927,7 +2329,7 @@ snd_azf3328_resume(struct pci_dev *pci) { struct snd_card *card = pci_get_drvdata(pci); struct snd_azf3328 *chip = card->private_data; - int reg; + unsigned reg; pci_set_power_state(pci, PCI_D0); pci_restore_state(pci); @@ -1939,23 +2341,21 @@ snd_azf3328_resume(struct pci_dev *pci) } pci_set_master(pci); - for (reg = 0; reg < AZF_IO_SIZE_IO2_PM / 2; reg++) - outw(chip->saved_regs_io2[reg], chip->io2_port + reg * 2); - for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; reg++) - outw(chip->saved_regs_mpu[reg], chip->mpu_port + reg * 2); - for (reg = 0; reg < AZF_IO_SIZE_SYNTH_PM / 2; reg++) - outw(chip->saved_regs_synth[reg], chip->synth_port + reg * 2); - for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; reg++) - outw(chip->saved_regs_mixer[reg], chip->mixer_port + reg * 2); - for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; reg++) - outw(chip->saved_regs_codec[reg], chip->codec_port + reg * 2); + for (reg = 0; reg < AZF_IO_SIZE_GAME_PM / 2; ++reg) + outw(chip->saved_regs_game[reg], chip->game_io + reg * 2); + for (reg = 0; reg < AZF_IO_SIZE_MPU_PM / 2; ++reg) + outw(chip->saved_regs_mpu[reg], chip->mpu_io + reg * 2); + for (reg = 0; reg < AZF_IO_SIZE_OPL3_PM / 2; ++reg) + outw(chip->saved_regs_opl3[reg], chip->opl3_io + reg * 2); + for (reg = 0; reg < AZF_IO_SIZE_MIXER_PM / 2; ++reg) + outw(chip->saved_regs_mixer[reg], chip->mixer_io + reg * 2); + for (reg = 0; reg < AZF_IO_SIZE_CODEC_PM / 2; ++reg) + outw(chip->saved_regs_codec[reg], chip->codec_io + reg * 2); snd_power_change_state(card, SNDRV_CTL_POWER_D0); return 0; } -#endif - - +#endif /* CONFIG_PM */ static struct pci_driver driver = { diff --git a/sound/pci/azt3328.h b/sound/pci/azt3328.h index 679fa992e2bc..3448fd626f80 100644 --- a/sound/pci/azt3328.h +++ b/sound/pci/azt3328.h @@ -54,7 +54,10 @@ #define SOUNDFORMAT_XTAL1 0x00 #define SOUNDFORMAT_XTAL2 0x01 /* all _SUSPECTED_ values are not used by Windows drivers, so we don't - * have any hard facts, only rough measurements */ + * have any hard facts, only rough measurements. + * All we know is that the crystal used on the board has 24.576MHz, + * like many soundcards (which results in the frequencies below when + * using certain divider values selected by the values below) */ #define SOUNDFORMAT_FREQ_SUSPECTED_4000 0x0c | SOUNDFORMAT_XTAL1 #define SOUNDFORMAT_FREQ_SUSPECTED_4800 0x0a | SOUNDFORMAT_XTAL1 #define SOUNDFORMAT_FREQ_5510 0x0c | SOUNDFORMAT_XTAL2 @@ -72,6 +75,26 @@ #define SOUNDFORMAT_FLAG_16BIT 0x0010 #define SOUNDFORMAT_FLAG_2CHANNELS 0x0020 +/* define frequency helpers, for maximum value safety */ +enum { +#define AZF_FREQ(rate) AZF_FREQ_##rate = rate + AZF_FREQ(4000), + AZF_FREQ(4800), + AZF_FREQ(5512), + AZF_FREQ(6620), + AZF_FREQ(8000), + AZF_FREQ(9600), + AZF_FREQ(11025), + AZF_FREQ(13240), + AZF_FREQ(16000), + AZF_FREQ(22050), + AZF_FREQ(32000), + AZF_FREQ(44100), + AZF_FREQ(48000), + AZF_FREQ(66200), +#undef AZF_FREQ +} AZF_FREQUENCIES; + /** recording area (see also: playback bit flag definitions) **/ #define IDX_IO_REC_FLAGS 0x20 /* ??, PU:0x0000 */ #define IDX_IO_REC_IRQTYPE 0x22 /* ??, PU:0x0000 */ @@ -97,40 +120,164 @@ /** DirectX timer, main interrupt area (FIXME: and something else?) **/ #define IDX_IO_TIMER_VALUE 0x60 /* found this timer area by pure luck :-) */ - #define TIMER_VALUE_MASK 0x000fffffUL /* timer countdown value; triggers IRQ when timer is finished */ - #define TIMER_ENABLE_COUNTDOWN 0x01000000UL /* activate the timer countdown */ - #define TIMER_ENABLE_IRQ 0x02000000UL /* trigger timer IRQ on zero transition */ - #define TIMER_ACK_IRQ 0x04000000UL /* being set in IRQ handler in case port 0x00 (hmm, not port 0x64!?!?) had 0x0020 set upon IRQ handler */ + /* timer countdown value; triggers IRQ when timer is finished */ + #define TIMER_VALUE_MASK 0x000fffffUL + /* activate timer countdown */ + #define TIMER_COUNTDOWN_ENABLE 0x01000000UL + /* trigger timer IRQ on zero transition */ + #define TIMER_IRQ_ENABLE 0x02000000UL + /* being set in IRQ handler in case port 0x00 (hmm, not port 0x64!?!?) + * had 0x0020 set upon IRQ handler */ + #define TIMER_IRQ_ACK 0x04000000UL #define IDX_IO_IRQSTATUS 0x64 - #define IRQ_PLAYBACK 0x0001 - #define IRQ_RECORDING 0x0002 - #define IRQ_MPU401 0x0010 - #define IRQ_TIMER 0x0020 /* DirectX timer */ - #define IRQ_UNKNOWN1 0x0040 /* probably unused, or possibly I2S port? or gameport IRQ? */ - #define IRQ_UNKNOWN2 0x0080 /* probably unused, or possibly I2S port? or gameport IRQ? */ + /* some IRQ bit in here might also be used to signal a power-management timer + * timeout, to request shutdown of the chip (e.g. AD1815JS has such a thing). + * Some OPL3 hardware (e.g. in LM4560) has some special timer hardware which + * can trigger an OPL3 timer IRQ, so maybe there's such a thing as well... */ + + #define IRQ_PLAYBACK 0x0001 + #define IRQ_RECORDING 0x0002 + #define IRQ_UNKNOWN1 0x0004 /* most probably I2S port */ + #define IRQ_GAMEPORT 0x0008 /* Interrupt of Digital(ly) Enhanced Game Port */ + #define IRQ_MPU401 0x0010 + #define IRQ_TIMER 0x0020 /* DirectX timer */ + #define IRQ_UNKNOWN2 0x0040 /* probably unused, or possibly I2S port? */ + #define IRQ_UNKNOWN3 0x0080 /* probably unused, or possibly I2S port? */ #define IDX_IO_66H 0x66 /* writing 0xffff returns 0x0000 */ -#define IDX_IO_SOME_VALUE 0x68 /* this is set to e.g. 0x3ff or 0x300, and writable; maybe some buffer limit, but I couldn't find out more, PU:0x00ff */ -#define IDX_IO_6AH 0x6A /* this WORD can be set to have bits 0x0028 activated (FIXME: correct??); actually inhibits PCM playback!!! maybe power management?? */ - #define IO_6A_PAUSE_PLAYBACK 0x0200 /* bit 9; sure, this pauses playback, but what the heck is this really about?? */ -#define IDX_IO_6CH 0x6C -#define IDX_IO_6EH 0x6E /* writing 0xffff returns 0x83fe */ -/* further I/O indices not saved/restored, so probably not used */ + /* this is set to e.g. 0x3ff or 0x300, and writable; + * maybe some buffer limit, but I couldn't find out more, PU:0x00ff: */ +#define IDX_IO_SOME_VALUE 0x68 + #define IO_68_RANDOM_TOGGLE1 0x0100 /* toggles randomly */ + #define IO_68_RANDOM_TOGGLE2 0x0200 /* toggles randomly */ + /* umm, nope, behaviour of these bits changes depending on what we wrote + * to 0x6b!! */ + +/* this WORD can be set to have bits 0x0028 activated (FIXME: correct??); + * actually inhibits PCM playback!!! maybe power management??: */ +#define IDX_IO_6AH 0x6A + /* bit 5: enabling this will activate permanent counting of bytes 2/3 + * at gameport I/O (0xb402/3) (equal values each) and cause + * gameport legacy I/O at 0x0200 to be _DISABLED_! + * Is this Digital Enhanced Game Port Enable??? Or maybe it's Testmode + * for Enhanced Digital Gameport (see 4D Wave DX card): */ + #define IO_6A_SOMETHING1_GAMEPORT 0x0020 + /* bit 8; sure, this _pauses_ playback (later resumes at same spot!), + * but what the heck is this really about??: */ + #define IO_6A_PAUSE_PLAYBACK_BIT8 0x0100 + /* bit 9; sure, this _pauses_ playback (later resumes at same spot!), + * but what the heck is this really about??: */ + #define IO_6A_PAUSE_PLAYBACK_BIT9 0x0200 + /* BIT8 and BIT9 are _NOT_ able to affect OPL3 MIDI playback, + * thus it suggests influence on PCM only!! + * However OTOH there seems to be no bit anywhere around here + * which is able to disable OPL3... */ + /* bit 10: enabling this actually changes values at legacy gameport + * I/O address (0x200); is this enabling of the Digital Enhanced Game Port??? + * Or maybe this simply switches off the NE558 circuit, since enabling this + * still lets us evaluate button states, but not axis states */ + #define IO_6A_SOMETHING2_GAMEPORT 0x0400 + /* writing 0x0300: causes quite some crackling during + * PC activity such as switching windows (PCI traffic?? + * --> FIFO/timing settings???) */ + /* writing 0x0100 plus/or 0x0200 inhibits playback */ + /* since the Windows .INF file has Flag_Enable_JoyStick and + * Flag_Enable_SB_DOS_Emulation directly together, it stands to reason + * that some other bit in this same register might be responsible + * for SB DOS Emulation activation (note that the file did NOT define + * a switch for OPL3!) */ +#define IDX_IO_6CH 0x6C /* unknown; fully read-writable */ +#define IDX_IO_6EH 0x6E + /* writing 0xffff returns 0x83fe (or 0x03fe only). + * writing 0x83 (and only 0x83!!) to 0x6f will cause 0x6c to switch + * from 0000 to ffff. */ +/* further I/O indices not saved/restored and not readable after writing, + * so probably not used */ -/*** I/O 2 area port indices ***/ + +/*** Gameport area port indices ***/ /* (only 0x06 of 0x08 bytes saved/restored by Windows driver) */ -#define AZF_IO_SIZE_IO2 0x08 -#define AZF_IO_SIZE_IO2_PM 0x06 +#define AZF_IO_SIZE_GAME 0x08 +#define AZF_IO_SIZE_GAME_PM 0x06 + +enum { + AZF_GAME_LEGACY_IO_PORT = 0x200 +} AZF_GAME_CONFIGS; + +#define IDX_GAME_LEGACY_COMPATIBLE 0x00 + /* in some operation mode, writing anything to this port + * triggers an interrupt: + * yup, that's in case IDX_GAME_01H has one of the + * axis measurement bits enabled + * (and of course one needs to have GAME_HWCFG_IRQ_ENABLE, too) */ + +#define IDX_GAME_AXES_CONFIG 0x01 + /* NOTE: layout of this register awfully similar (read: "identical??") + * to AD1815JS.pdf (p.29) */ + + /* enables axis 1 (X axis) measurement: */ + #define GAME_AXES_ENABLE_1 0x01 + /* enables axis 2 (Y axis) measurement: */ + #define GAME_AXES_ENABLE_2 0x02 + /* enables axis 3 (X axis) measurement: */ + #define GAME_AXES_ENABLE_3 0x04 + /* enables axis 4 (Y axis) measurement: */ + #define GAME_AXES_ENABLE_4 0x08 + /* selects the current axis to read the measured value of + * (at IDX_GAME_AXIS_VALUE): + * 00 = axis 1, 01 = axis 2, 10 = axis 3, 11 = axis 4: */ + #define GAME_AXES_READ_MASK 0x30 + /* enable to have the latch continuously accept ADC values + * (and continuously cause interrupts in case interrupts are enabled); + * AD1815JS.pdf says it's ~16ms interval there: */ + #define GAME_AXES_LATCH_ENABLE 0x40 + /* joystick data (measured axes) ready for reading: */ + #define GAME_AXES_SAMPLING_READY 0x80 + + /* NOTE: other card specs (SiS960 and others!) state that the + * game position latches should be frozen when reading and be freed + * (== reset?) after reading!!! + * Freezing most likely means disabling 0x40 (GAME_AXES_LATCH_ENABLE), + * but how to free the value? */ + /* An internet search for "gameport latch ADC" should provide some insight + * into how to program such a gameport system. */ + + /* writing 0xf0 to 01H once reset both counters to 0, in some special mode!? + * yup, in case 6AH 0x20 is not enabled + * (and 0x40 is sufficient, 0xf0 is not needed) */ + +#define IDX_GAME_AXIS_VALUE 0x02 + /* R: value of currently configured axis (word value!); + * W: trigger axis measurement */ + +#define IDX_GAME_HWCONFIG 0x04 + /* note: bits 4 to 7 are never set (== 0) when reading! + * --> reserved bits? */ + /* enables IRQ notification upon axes measurement ready: */ + #define GAME_HWCFG_IRQ_ENABLE 0x01 + /* these bits choose a different frequency for the + * internal ADC counter increment. + * hmm, seems to be a combo of bits: + * 00 --> standard frequency + * 10 --> 1/2 + * 01 --> 1/20 + * 11 --> 1/200: */ + #define GAME_HWCFG_ADC_COUNTER_FREQ_MASK 0x06 -#define IDX_IO2_LEGACY_ADDR 0x04 - #define LEGACY_SOMETHING 0x01 /* OPL3?? */ - #define LEGACY_JOY 0x08 + /* enable gameport legacy I/O address (0x200) + * I was unable to locate any configurability for a different address: */ + #define GAME_HWCFG_LEGACY_ADDRESS_ENABLE 0x08 +/*** MPU401 ***/ #define AZF_IO_SIZE_MPU 0x04 #define AZF_IO_SIZE_MPU_PM 0x04 -#define AZF_IO_SIZE_SYNTH 0x08 -#define AZF_IO_SIZE_SYNTH_PM 0x06 +/*** OPL3 synth ***/ +#define AZF_IO_SIZE_OPL3 0x08 +#define AZF_IO_SIZE_OPL3_PM 0x06 +/* hmm, given that a standard OPL3 has 4 registers only, + * there might be some enhanced functionality lurking at the end + * (especially since register 0x04 has a "non-empty" value 0xfe) */ /*** mixer I/O area port indices ***/ /* (only 0x22 of 0x40 bytes saved/restored by Windows driver) -- cgit v1.2.3 From 9ad593f6d326e7a4664e3856520f6c042f82a37f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 16 May 2008 12:34:47 +0200 Subject: [ALSA] hda - Fix DMA position inaccuracy Many HD-audio controllers seem inaccurate about the IRQ timing of PCM period updates. This has caused problems on audio quality; e.g. JACK doesn't work with two periods. This patch fixes the problem by checking the current DMA position at IRQ handler and delays the period-update via a workq if it's inaccurate. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/pci/hda/hda_intel.c | 124 +++++++++++++++++++++++++++++++++++++++------- 1 file changed, 106 insertions(+), 18 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index b3a618eb42cd..6ba7ac01d9f6 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -285,6 +285,7 @@ struct azx_dev { u32 *posbuf; /* position buffer pointer */ unsigned int bufsize; /* size of the play buffer in bytes */ + unsigned int period_bytes; /* size of the period in bytes */ unsigned int frags; /* number for period in the play buffer */ unsigned int fifo_size; /* FIFO size */ @@ -301,11 +302,10 @@ struct azx_dev { */ unsigned char stream_tag; /* assigned stream */ unsigned char index; /* stream index */ - /* for sanity check of position buffer */ - unsigned int period_intr; unsigned int opened :1; unsigned int running :1; + unsigned int irq_pending: 1; }; /* CORB/RIRB */ @@ -369,6 +369,9 @@ struct azx { /* for debugging */ unsigned int last_cmd; /* last issued command (to sync) */ + + /* for pending irqs */ + struct work_struct irq_pending_work; }; /* driver types */ @@ -908,6 +911,8 @@ static void azx_init_pci(struct azx *chip) } +static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev); + /* * interrupt handler */ @@ -930,11 +935,18 @@ static irqreturn_t azx_interrupt(int irq, void *dev_id) azx_dev = &chip->azx_dev[i]; if (status & azx_dev->sd_int_sta_mask) { azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK); - if (azx_dev->substream && azx_dev->running) { - azx_dev->period_intr++; + if (!azx_dev->substream || !azx_dev->running) + continue; + /* check whether this IRQ is really acceptable */ + if (azx_position_ok(chip, azx_dev)) { + azx_dev->irq_pending = 0; spin_unlock(&chip->reg_lock); snd_pcm_period_elapsed(azx_dev->substream); spin_lock(&chip->reg_lock); + } else { + /* bogus IRQ, process it later */ + azx_dev->irq_pending = 1; + schedule_work(&chip->irq_pending_work); } } } @@ -973,6 +985,7 @@ static int azx_setup_periods(struct snd_pcm_substream *substream, azx_sd_writel(azx_dev, SD_BDLPU, 0); period_bytes = snd_pcm_lib_period_bytes(substream); + azx_dev->period_bytes = period_bytes; periods = azx_dev->bufsize / period_bytes; /* program the initial BDL entries */ @@ -1421,27 +1434,16 @@ static int azx_pcm_trigger(struct snd_pcm_substream *substream, int cmd) return 0; } -static snd_pcm_uframes_t azx_pcm_pointer(struct snd_pcm_substream *substream) +static unsigned int azx_get_position(struct azx *chip, + struct azx_dev *azx_dev) { - struct azx_pcm *apcm = snd_pcm_substream_chip(substream); - struct azx *chip = apcm->chip; - struct azx_dev *azx_dev = get_azx_dev(substream); unsigned int pos; if (chip->position_fix == POS_FIX_POSBUF || chip->position_fix == POS_FIX_AUTO) { /* use the position buffer */ pos = le32_to_cpu(*azx_dev->posbuf); - if (chip->position_fix == POS_FIX_AUTO && - azx_dev->period_intr == 1 && !pos) { - printk(KERN_WARNING - "hda-intel: Invalid position buffer, " - "using LPIB read method instead.\n"); - chip->position_fix = POS_FIX_NONE; - goto read_lpib; - } } else { - read_lpib: /* read LPIB */ pos = azx_sd_readl(azx_dev, SD_LPIB); if (chip->position_fix == POS_FIX_FIFO) @@ -1449,7 +1451,90 @@ static snd_pcm_uframes_t azx_pcm_pointer(struct snd_pcm_substream *substream) } if (pos >= azx_dev->bufsize) pos = 0; - return bytes_to_frames(substream->runtime, pos); + return pos; +} + +static snd_pcm_uframes_t azx_pcm_pointer(struct snd_pcm_substream *substream) +{ + struct azx_pcm *apcm = snd_pcm_substream_chip(substream); + struct azx *chip = apcm->chip; + struct azx_dev *azx_dev = get_azx_dev(substream); + return bytes_to_frames(substream->runtime, + azx_get_position(chip, azx_dev)); +} + +/* + * Check whether the current DMA position is acceptable for updating + * periods. Returns non-zero if it's OK. + * + * Many HD-audio controllers appear pretty inaccurate about + * the update-IRQ timing. The IRQ is issued before actually the + * data is processed. So, we need to process it afterwords in a + * workqueue. + */ +static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev) +{ + unsigned int pos; + + pos = azx_get_position(chip, azx_dev); + if (chip->position_fix == POS_FIX_AUTO) { + if (!pos) { + printk(KERN_WARNING + "hda-intel: Invalid position buffer, " + "using LPIB read method instead.\n"); + chip->position_fix = POS_FIX_NONE; + pos = azx_get_position(chip, azx_dev); + } else + chip->position_fix = POS_FIX_POSBUF; + } + + if (pos % azx_dev->period_bytes > azx_dev->period_bytes / 2) + return 0; /* NG - it's below the period boundary */ + return 1; /* OK, it's fine */ +} + +/* + * The work for pending PCM period updates. + */ +static void azx_irq_pending_work(struct work_struct *work) +{ + struct azx *chip = container_of(work, struct azx, irq_pending_work); + int i, pending; + + for (;;) { + pending = 0; + spin_lock_irq(&chip->reg_lock); + for (i = 0; i < chip->num_streams; i++) { + struct azx_dev *azx_dev = &chip->azx_dev[i]; + if (!azx_dev->irq_pending || + !azx_dev->substream || + !azx_dev->running) + continue; + if (azx_position_ok(chip, azx_dev)) { + azx_dev->irq_pending = 0; + spin_unlock(&chip->reg_lock); + snd_pcm_period_elapsed(azx_dev->substream); + spin_lock(&chip->reg_lock); + } else + pending++; + } + spin_unlock_irq(&chip->reg_lock); + if (!pending) + return; + cond_resched(); + } +} + +/* clear irq_pending flags and assure no on-going workq */ +static void azx_clear_irq_pending(struct azx *chip) +{ + int i; + + spin_lock_irq(&chip->reg_lock); + for (i = 0; i < chip->num_streams; i++) + chip->azx_dev[i].irq_pending = 0; + spin_unlock_irq(&chip->reg_lock); + flush_scheduled_work(); } static struct snd_pcm_ops azx_pcm_ops = { @@ -1676,6 +1761,7 @@ static int azx_suspend(struct pci_dev *pci, pm_message_t state) int i; snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); + azx_clear_irq_pending(chip); for (i = 0; i < AZX_MAX_PCMS; i++) snd_pcm_suspend_all(chip->pcm[i]); if (chip->initialized) @@ -1732,6 +1818,7 @@ static int azx_free(struct azx *chip) int i; if (chip->initialized) { + azx_clear_irq_pending(chip); for (i = 0; i < chip->num_streams; i++) azx_stream_stop(chip, &chip->azx_dev[i]); azx_stop_chip(chip); @@ -1857,6 +1944,7 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, chip->irq = -1; chip->driver_type = driver_type; chip->msi = enable_msi; + INIT_WORK(&chip->irq_pending_work, azx_irq_pending_work); chip->position_fix = check_position_fix(chip, position_fix[dev]); check_probe_mask(chip, dev); -- cgit v1.2.3 From b2efbbfba24efc8456d68d5af42d082ab1c2febc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 19 May 2008 12:30:58 +0200 Subject: [ALSA] ASoC: Remove in-code changelogs The overwhelming majority just say 'initial version' anyway. Signed-off-by: Mark Brown Acked-by: Ben Dooks Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/codecs/ac97.c | 3 --- sound/soc/codecs/wm9712.c | 3 --- sound/soc/codecs/wm9713.c | 3 --- sound/soc/pxa/corgi.c | 4 ---- sound/soc/pxa/pxa2xx-i2s.c | 3 --- sound/soc/pxa/spitz.c | 3 --- sound/soc/pxa/tosa.c | 3 --- sound/soc/s3c24xx/neo1973_wm8753.c | 4 ---- sound/soc/s3c24xx/s3c2443-ac97.c | 3 --- sound/soc/s3c24xx/s3c24xx-i2s.c | 5 ----- sound/soc/s3c24xx/s3c24xx-pcm.c | 4 ---- sound/soc/s3c24xx/smdk2443_wm9710.c | 3 --- sound/soc/soc-core.c | 4 ---- sound/soc/soc-dapm.c | 5 ----- 14 files changed, 50 deletions(-) diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c index 2a1ffe396908..7bf2081b46fb 100644 --- a/sound/soc/codecs/ac97.c +++ b/sound/soc/codecs/ac97.c @@ -10,9 +10,6 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * Revision history - * 17th Oct 2005 Initial version. - * * Generic AC97 support. */ diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 76c1e2d33e7d..89efe40c7c33 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -9,9 +9,6 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * - * Revision history - * 4th Feb 2006 Initial version. */ #include diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index 1f241161445c..9e6b2fd7262b 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -10,9 +10,6 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * Revision history - * 4th Feb 2006 Initial version. - * * Features:- * * o Support for AC97 Codec, Voice DAC and Aux DAC diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c index 852f16d963a1..edeea63e80e8 100644 --- a/sound/soc/pxa/corgi.c +++ b/sound/soc/pxa/corgi.c @@ -11,10 +11,6 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * - * Revision history - * 30th Nov 2005 Initial version. - * */ #include diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 425071030970..35090c2870ff 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -9,9 +9,6 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * - * Revision history - * 12th Aug 2005 Initial version. */ #include diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c index 73a6df8709e1..092b5c776b40 100644 --- a/sound/soc/pxa/spitz.c +++ b/sound/soc/pxa/spitz.c @@ -12,9 +12,6 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * Revision history - * 30th Nov 2005 Initial version. - * */ #include diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index fda2aa056d53..465ff0f458ef 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -12,9 +12,6 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * Revision history - * 30th Nov 2005 Initial version. - * * GPIO's * 1 - Jack Insertion * 5 - Hookswitch (headset answer/hang up switch) diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c index 79c5027273cb..c1a0161bc72e 100644 --- a/sound/soc/s3c24xx/neo1973_wm8753.c +++ b/sound/soc/s3c24xx/neo1973_wm8753.c @@ -10,10 +10,6 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * Revision history - * 20th Jan 2007 Initial version. - * 05th Feb 2007 Rename all to Neo1973 - * */ #include diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c index e81d9a6c83da..0eed140dcd9b 100644 --- a/sound/soc/s3c24xx/s3c2443-ac97.c +++ b/sound/soc/s3c24xx/s3c2443-ac97.c @@ -10,9 +10,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Revision history - * 21st Mar 2007 Initial Version */ #include diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c index 1ed6afd45459..ddf87246c77b 100644 --- a/sound/soc/s3c24xx/s3c24xx-i2s.c +++ b/sound/soc/s3c24xx/s3c24xx-i2s.c @@ -12,11 +12,6 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * - * - * Revision history - * 11th Dec 2006 Merged with Simtec driver - * 10th Nov 2006 Initial version. */ #include diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c index 7806ae614617..ef599745159c 100644 --- a/sound/soc/s3c24xx/s3c24xx-pcm.c +++ b/sound/soc/s3c24xx/s3c24xx-pcm.c @@ -12,10 +12,6 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * - * Revision history - * 11th Dec 2006 Merged with Simtec driver - * 10th Nov 2006 Initial version. */ #include diff --git a/sound/soc/s3c24xx/smdk2443_wm9710.c b/sound/soc/s3c24xx/smdk2443_wm9710.c index b4a56302b9ab..8515d6ff03f2 100644 --- a/sound/soc/s3c24xx/smdk2443_wm9710.c +++ b/sound/soc/s3c24xx/smdk2443_wm9710.c @@ -10,9 +10,6 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * Revision history - * 8th Mar 2007 Initial version. - * */ #include diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index e148db940cfc..0318d8abe3e8 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -14,10 +14,6 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * Revision history - * 12th Aug 2005 Initial version. - * 25th Oct 2005 Working Codec, Interface and Platform registration. - * * TODO: * o Add hw rules to enforce rates, etc. * o More testing with other codecs/machines. diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 1ef6d94b8357..8a3192bcee78 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -10,11 +10,6 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * Revision history - * 12th Aug 2005 Initial version. - * 25th Oct 2005 Implemented path power domain. - * 18th Dec 2005 Implemented machine and stream level power domain. - * * Features: * o Changes power status of internal codec blocks depending on the * dynamic configuration of codec internal audio paths and active -- cgit v1.2.3 From 1ef6ab75c7deef931d6308af282ed7d8e480e77f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 19 May 2008 12:31:55 +0200 Subject: [ALSA] ASoC: Make CPU and codec DAI operations have same type The CPU and codec DAI operations differ only in the presence of the digital mute operation for the codec so they may as well be the same type. Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/soc.h | 30 ++++++------------------------ 1 file changed, 6 insertions(+), 24 deletions(-) diff --git a/include/sound/soc.h b/include/sound/soc.h index d3c8c033dff8..73accbcfbd2d 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -272,9 +272,9 @@ struct snd_soc_ops { int (*trigger)(struct snd_pcm_substream *, int); }; -/* ASoC codec DAI ops */ -struct snd_soc_codec_ops { - /* codec DAI clocking configuration */ +/* ASoC DAI ops */ +struct snd_soc_dai_ops { + /* DAI clocking configuration */ int (*set_sysclk)(struct snd_soc_codec_dai *codec_dai, int clk_id, unsigned int freq, int dir); int (*set_pll)(struct snd_soc_codec_dai *codec_dai, @@ -282,7 +282,7 @@ struct snd_soc_codec_ops { int (*set_clkdiv)(struct snd_soc_codec_dai *codec_dai, int div_id, int div); - /* CPU DAI format configuration */ + /* DAI format configuration */ int (*set_fmt)(struct snd_soc_codec_dai *codec_dai, unsigned int fmt); int (*set_tdm_slot)(struct snd_soc_codec_dai *codec_dai, @@ -293,24 +293,6 @@ struct snd_soc_codec_ops { int (*digital_mute)(struct snd_soc_codec_dai *, int mute); }; -/* ASoC cpu DAI ops */ -struct snd_soc_cpu_ops { - /* CPU DAI clocking configuration */ - int (*set_sysclk)(struct snd_soc_cpu_dai *cpu_dai, - int clk_id, unsigned int freq, int dir); - int (*set_clkdiv)(struct snd_soc_cpu_dai *cpu_dai, - int div_id, int div); - int (*set_pll)(struct snd_soc_cpu_dai *cpu_dai, - int pll_id, unsigned int freq_in, unsigned int freq_out); - - /* CPU DAI format configuration */ - int (*set_fmt)(struct snd_soc_cpu_dai *cpu_dai, - unsigned int fmt); - int (*set_tdm_slot)(struct snd_soc_cpu_dai *cpu_dai, - unsigned int mask, int slots); - int (*set_tristate)(struct snd_soc_cpu_dai *, int tristate); -}; - /* SoC Codec DAI */ struct snd_soc_codec_dai { char *name; @@ -328,7 +310,7 @@ struct snd_soc_codec_dai { /* ops */ struct snd_soc_ops ops; - struct snd_soc_codec_ops dai_ops; + struct snd_soc_dai_ops dai_ops; /* DAI private data */ void *private_data; @@ -352,7 +334,7 @@ struct snd_soc_cpu_dai { /* ops */ struct snd_soc_ops ops; - struct snd_soc_cpu_ops dai_ops; + struct snd_soc_dai_ops dai_ops; /* DAI capabilities */ struct snd_soc_pcm_stream capture; -- cgit v1.2.3 From 1a189b97190d3f0f8cf0379a799d3555b2d648bb Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 13 Apr 2008 21:41:55 +0100 Subject: [ARM] pxa: Add bare bones PWM API Signed-off-by: Russell King --- arch/arm/Kconfig | 3 +++ include/linux/pwm.h | 31 +++++++++++++++++++++++++++++++ 2 files changed, 34 insertions(+) create mode 100644 include/linux/pwm.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b786e68914d4..c274dbb89a83 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -22,6 +22,9 @@ config ARM Europe. There is an ARM Linux project with a web page at . +config HAVE_PWM + bool + config SYS_SUPPORTS_APM_EMULATION bool diff --git a/include/linux/pwm.h b/include/linux/pwm.h new file mode 100644 index 000000000000..3945f803d514 --- /dev/null +++ b/include/linux/pwm.h @@ -0,0 +1,31 @@ +#ifndef __LINUX_PWM_H +#define __LINUX_PWM_H + +struct pwm_device; + +/* + * pwm_request - request a PWM device + */ +struct pwm_device *pwm_request(int pwm_id, const char *label); + +/* + * pwm_free - free a PWM device + */ +void pwm_free(struct pwm_device *pwm); + +/* + * pwm_config - change a PWM device configuration + */ +int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns); + +/* + * pwm_enable - start a PWM output toggling + */ +int pwm_enable(struct pwm_device *pwm); + +/* + * pwm_disable - stop a PWM output toggling + */ +void pwm_disable(struct pwm_device *pwm); + +#endif /* __ASM_ARCH_PWM_H */ -- cgit v1.2.3 From 75540c1ac3c7bd72ac8e092058f9714875239995 Mon Sep 17 00:00:00 2001 From: eric miao Date: Sun, 13 Apr 2008 21:44:04 +0100 Subject: [ARM] pxa: Add PXA support for PWM API Patch mainly from Eric Miao, with minor edits by rmk. Note: PWM0 and PWM2 share the same register I/O space and clock gating on pxa{27x, 3xx}, thus PWM2 is treated in the driver as a child PWM of PWM0. And this is also true for PWM1/3. Signed-off-by: eric miao Signed-off-by: Russell King --- arch/arm/mach-pxa/Kconfig | 5 + arch/arm/mach-pxa/Makefile | 1 + arch/arm/mach-pxa/devices.c | 60 +++++++++ arch/arm/mach-pxa/devices.h | 5 + arch/arm/mach-pxa/pwm.c | 299 ++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-pxa/pxa25x.c | 6 +- arch/arm/mach-pxa/pxa27x.c | 5 +- arch/arm/mach-pxa/pxa3xx.c | 4 + 8 files changed, 382 insertions(+), 3 deletions(-) create mode 100644 arch/arm/mach-pxa/pwm.c diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 5da7a6820492..9c01505b1825 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -273,4 +273,9 @@ config PXA_SSP tristate help Enable support for PXA2xx SSP ports + +config PXA_PWM + tristate + help + Enable support for PXA2xx/PXA3xx PWM controllers endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 0e6d05bb81aa..02cbc3cfbe01 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o # Generic drivers that other drivers may depend upon obj-$(CONFIG_PXA_SSP) += ssp.o +obj-$(CONFIG_PXA_PWM) += pwm.o # SoC-specific code obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa25x.o diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index d6c05b6eab35..794a1076db73 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -280,6 +280,36 @@ struct platform_device pxa_device_rtc = { #ifdef CONFIG_PXA25x +static struct resource pxa25x_resource_pwm0[] = { + [0] = { + .start = 0x40b00000, + .end = 0x40b0000f, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device pxa25x_device_pwm0 = { + .name = "pxa25x-pwm", + .id = 0, + .resource = pxa25x_resource_pwm0, + .num_resources = ARRAY_SIZE(pxa25x_resource_pwm0), +}; + +static struct resource pxa25x_resource_pwm1[] = { + [0] = { + .start = 0x40c00000, + .end = 0x40c0000f, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device pxa25x_device_pwm1 = { + .name = "pxa25x-pwm", + .id = 1, + .resource = pxa25x_resource_pwm1, + .num_resources = ARRAY_SIZE(pxa25x_resource_pwm1), +}; + static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32); static struct resource pxa25x_resource_ssp[] = { @@ -568,6 +598,36 @@ struct platform_device pxa27x_device_ssp3 = { .num_resources = ARRAY_SIZE(pxa27x_resource_ssp3), }; +static struct resource pxa27x_resource_pwm0[] = { + [0] = { + .start = 0x40b00000, + .end = 0x40b0001f, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device pxa27x_device_pwm0 = { + .name = "pxa27x-pwm", + .id = 0, + .resource = pxa27x_resource_pwm0, + .num_resources = ARRAY_SIZE(pxa27x_resource_pwm0), +}; + +static struct resource pxa27x_resource_pwm1[] = { + [0] = { + .start = 0x40c00000, + .end = 0x40c0001f, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device pxa27x_device_pwm1 = { + .name = "pxa27x-pwm", + .id = 1, + .resource = pxa27x_resource_pwm1, + .num_resources = ARRAY_SIZE(pxa27x_resource_pwm1), +}; + static struct resource pxa27x_resource_camera[] = { [0] = { .start = 0x50000000, diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index fcab017f27ee..e620a3373d42 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -24,4 +24,9 @@ extern struct platform_device pxa27x_device_ssp2; extern struct platform_device pxa27x_device_ssp3; extern struct platform_device pxa3xx_device_ssp4; +extern struct platform_device pxa25x_device_pwm0; +extern struct platform_device pxa25x_device_pwm1; +extern struct platform_device pxa27x_device_pwm0; +extern struct platform_device pxa27x_device_pwm1; + void __init pxa_register_device(struct platform_device *dev, void *data); diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c new file mode 100644 index 000000000000..70fb3ca6a058 --- /dev/null +++ b/arch/arm/mach-pxa/pwm.c @@ -0,0 +1,299 @@ +/* + * linux/arch/arm/mach-pxa/pwm.c + * + * simple driver for PWM (Pulse Width Modulator) controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * 2008-02-13 initial version + * eric miao + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* PWM registers and bits definitions */ +#define PWMCR (0x00) +#define PWMDCR (0x04) +#define PWMPCR (0x08) + +#define PWMCR_SD (1 << 6) +#define PWMDCR_FD (1 << 10) + +struct pwm_device { + struct list_head node; + struct platform_device *pdev; + + const char *label; + struct clk *clk; + void __iomem *mmio_base; + + unsigned int use_count; + unsigned int pwm_id; +}; + +/* + * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE + * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE + */ +int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) +{ + unsigned long long c; + unsigned long period_cycles, prescale, pv, dc; + + if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) + return -EINVAL; + + c = clk_get_rate(pwm->clk); + c = c * period_ns; + do_div(c, 1000000000); + period_cycles = c; + + if (period_cycles < 0) + period_cycles = 1; + prescale = (period_cycles - 1) / 1024; + pv = period_cycles / (prescale + 1) - 1; + + if (prescale > 63) + return -EINVAL; + + if (duty_ns == period_ns) + dc = PWMDCR_FD; + else + dc = (pv + 1) * duty_ns / period_ns; + + /* NOTE: the clock to PWM has to be enabled first + * before writing to the registers + */ + clk_enable(pwm->clk); + __raw_writel(prescale, pwm->mmio_base + PWMCR); + __raw_writel(dc, pwm->mmio_base + PWMDCR); + __raw_writel(pv, pwm->mmio_base + PWMPCR); + clk_disable(pwm->clk); + + return 0; +} +EXPORT_SYMBOL(pwm_config); + +int pwm_enable(struct pwm_device *pwm) +{ + return clk_enable(pwm->clk); +} +EXPORT_SYMBOL(pwm_enable); + +void pwm_disable(struct pwm_device *pwm) +{ + clk_disable(pwm->clk); +} +EXPORT_SYMBOL(pwm_disable); + +static DEFINE_MUTEX(pwm_lock); +static LIST_HEAD(pwm_list); + +struct pwm_device *pwm_request(int pwm_id, const char *label) +{ + struct pwm_device *pwm; + int found = 0; + + mutex_lock(&pwm_lock); + + list_for_each_entry(pwm, &pwm_list, node) { + if (pwm->pwm_id == pwm_id && pwm->use_count == 0) { + pwm->use_count++; + pwm->label = label; + found = 1; + break; + } + } + + mutex_unlock(&pwm_lock); + + return (found) ? pwm : NULL; +} +EXPORT_SYMBOL(pwm_request); + +void pwm_free(struct pwm_device *pwm) +{ + mutex_lock(&pwm_lock); + + if (pwm->use_count) { + pwm->use_count--; + pwm->label = NULL; + } else + pr_warning("PWM device already freed\n"); + + mutex_unlock(&pwm_lock); +} +EXPORT_SYMBOL(pwm_free); + +static inline void __add_pwm(struct pwm_device *pwm) +{ + mutex_lock(&pwm_lock); + list_add_tail(&pwm->node, &pwm_list); + mutex_unlock(&pwm_lock); +} + +static struct pwm_device *pwm_probe(struct platform_device *pdev, + unsigned int pwm_id, struct pwm_device *parent_pwm) +{ + struct pwm_device *pwm; + struct resource *r; + int ret = 0; + + pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); + if (pwm == NULL) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return ERR_PTR(-ENOMEM); + } + + pwm->clk = clk_get(&pdev->dev, "PWMCLK"); + if (IS_ERR(pwm->clk)) { + ret = PTR_ERR(pwm->clk); + goto err_free; + } + + pwm->use_count = 0; + pwm->pwm_id = pwm_id; + pwm->pdev = pdev; + + if (parent_pwm != NULL) { + /* registers for the second PWM has offset of 0x10 */ + pwm->mmio_base = parent_pwm->mmio_base + 0x10; + __add_pwm(pwm); + return pwm; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + + r = request_mem_region(r->start, r->end - r->start + 1, pdev->name); + if (r == NULL) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + ret = -EBUSY; + goto err_free_clk; + } + + pwm->mmio_base = ioremap(r->start, r->end - r->start + 1); + if (pwm->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + ret = -ENODEV; + goto err_free_mem; + } + + __add_pwm(pwm); + platform_set_drvdata(pdev, pwm); + return pwm; + +err_free_mem: + release_mem_region(r->start, r->end - r->start + 1); +err_free_clk: + clk_put(pwm->clk); +err_free: + kfree(pwm); + return ERR_PTR(ret); +} + +static int __devinit pxa25x_pwm_probe(struct platform_device *pdev) +{ + struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL); + + if (IS_ERR(pwm)) + return PTR_ERR(pwm); + + return 0; +} + +static int __devinit pxa27x_pwm_probe(struct platform_device *pdev) +{ + struct pwm_device *pwm; + + pwm = pwm_probe(pdev, pdev->id * 2, NULL); + if (IS_ERR(pwm)) + return PTR_ERR(pwm); + + pwm = pwm_probe(pdev, pdev->id * 2 + 1, pwm); + if (IS_ERR(pwm)) + return PTR_ERR(pwm); + + return 0; +} + +static int __devexit pwm_remove(struct platform_device *pdev) +{ + struct pwm_device *pwm; + struct resource *r; + + pwm = platform_get_drvdata(pdev); + if (pwm == NULL) + return -ENODEV; + + mutex_lock(&pwm_lock); + list_del(&pwm->node); + mutex_unlock(&pwm_lock); + + iounmap(pwm->mmio_base); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(r->start, r->end - r->start + 1); + + clk_put(pwm->clk); + kfree(pwm); + return 0; +} + +static struct platform_driver pxa25x_pwm_driver = { + .driver = { + .name = "pxa25x-pwm", + }, + .probe = pxa25x_pwm_probe, + .remove = __devexit_p(pwm_remove), +}; + +static struct platform_driver pxa27x_pwm_driver = { + .driver = { + .name = "pxa27x-pwm", + }, + .probe = pxa27x_pwm_probe, + .remove = __devexit_p(pwm_remove), +}; + +static int __init pwm_init(void) +{ + int ret = 0; + + ret = platform_driver_register(&pxa25x_pwm_driver); + if (ret) { + printk(KERN_ERR "failed to register pxa25x_pwm_driver\n"); + return ret; + } + + ret = platform_driver_register(&pxa27x_pwm_driver); + if (ret) { + printk(KERN_ERR "failed to register pxa27x_pwm_driver\n"); + return ret; + } + + return ret; +} +arch_initcall(pwm_init); + +static void __exit pwm_exit(void) +{ + platform_driver_unregister(&pxa25x_pwm_driver); + platform_driver_unregister(&pxa27x_pwm_driver); +} +module_exit(pwm_exit); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index e5b417d14bb0..2bed3f98d41c 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -129,12 +129,12 @@ static struct clk pxa25x_clks[] = { INIT_CKEN("SSPCLK", SSP, 3686400, 0, &pxa25x_device_ssp.dev), INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev), INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev), + INIT_CKEN("PWMCLK", PWM0, 3686400, 0, &pxa25x_device_pwm0.dev), + INIT_CKEN("PWMCLK", PWM1, 3686400, 0, &pxa25x_device_pwm1.dev), INIT_CKEN("AC97CLK", AC97, 24576000, 0, NULL), /* - INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), - INIT_CKEN("PWMCLK", PWM0, 3686400, 0, NULL), INIT_CKEN("I2SCLK", I2S, 14745600, 0, NULL), */ INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL), @@ -269,6 +269,8 @@ static struct platform_device *pxa25x_devices[] __initdata = { &pxa25x_device_ssp, &pxa25x_device_nssp, &pxa25x_device_assp, + &pxa25x_device_pwm0, + &pxa25x_device_pwm1, }; static struct sys_device pxa25x_sysdev[] = { diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 7e945836e129..bc2e80f69673 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -157,12 +157,13 @@ static struct clk pxa27x_clks[] = { INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev), INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), + INIT_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev), + INIT_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev), INIT_CKEN("AC97CLK", AC97, 24576000, 0, NULL), INIT_CKEN("AC97CONFCLK", AC97CONF, 24576000, 0, NULL), /* - INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL), INIT_CKEN("MSLCLK", MSL, 48000000, 0, NULL), INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL), INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL), @@ -363,6 +364,8 @@ static struct platform_device *devices[] __initdata = { &pxa27x_device_ssp1, &pxa27x_device_ssp2, &pxa27x_device_ssp3, + &pxa27x_device_pwm0, + &pxa27x_device_pwm1, }; static struct sys_device pxa27x_sysdev[] = { diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 644550bfa330..0f717df1fdb2 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -239,6 +239,8 @@ static struct clk pxa3xx_clks[] = { PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev), PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev), PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev), + PXA3xx_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev), + PXA3xx_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev), PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev), PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev), @@ -530,6 +532,8 @@ static struct platform_device *devices[] __initdata = { &pxa27x_device_ssp2, &pxa27x_device_ssp3, &pxa3xx_device_ssp4, + &pxa27x_device_pwm0, + &pxa27x_device_pwm1, }; static struct sys_device pxa3xx_sysdev[] = { -- cgit v1.2.3 From 02a8e76979f9b439642e67955edb865c112926f6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 17:15:32 +0100 Subject: [ARM] pxa: corgibl_limit_intensity build errors If CONFIG_BACKLIGHT_CORGI is not selected, then corgibl_limit_intensity() is not present. However, both corgi_pm.c and sharp_pm.c reference this symbol, resulting in a link error. Wrap the references with the relevant ifdefs, and avoid the resulting NULL pointer dereference by making the code in sharpsl_pm.c also conditional on the config symbol. Signed-off-by: Russell King --- arch/arm/common/sharpsl_pm.c | 2 ++ arch/arm/mach-pxa/corgi_pm.c | 2 ++ arch/arm/mach-pxa/spitz_pm.c | 2 ++ 3 files changed, 6 insertions(+) diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 5bba5255b119..5736c987c80d 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -157,6 +157,7 @@ static void sharpsl_battery_thread(struct work_struct *private_) dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage, sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); +#ifdef CONFIG_BACKLIGHT_CORGI /* If battery is low. limit backlight intensity to save power. */ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) || @@ -169,6 +170,7 @@ static void sharpsl_battery_thread(struct work_struct *private_) sharpsl_pm.machinfo->backlight_limit(0); sharpsl_pm.flags &= ~SHARPSL_BL_LIMIT; } +#endif /* Suspend if critical battery level */ if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE) diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 0a85f706e887..ae91c4b1135c 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -204,7 +204,9 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = { .read_devdata = corgipm_read_devdata, .charger_wakeup = corgi_charger_wakeup, .should_wakeup = corgi_should_wakeup, +#ifdef CONFIG_BACKLIGHT_CORGI .backlight_limit = corgibl_limit_intensity, +#endif .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, .charge_on_temp = SHARPSL_CHARGE_ON_TEMP, .charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH, diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 23f050feb208..48396f4eb265 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -207,7 +207,9 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = { .read_devdata = spitzpm_read_devdata, .charger_wakeup = spitz_charger_wakeup, .should_wakeup = spitz_should_wakeup, +#ifdef CONFIG_BACKLIGHT_CORGI .backlight_limit = corgibl_limit_intensity, +#endif .charge_on_volt = SHARPSL_CHARGE_ON_VOLT, .charge_on_temp = SHARPSL_CHARGE_ON_TEMP, .charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH, -- cgit v1.2.3 From 284d115ec9b70d7c38752d10ad393a198db07a4b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 17:32:16 +0100 Subject: [ARM] pxa: separate PXA25x and PXA27x UDC register definitions The PXA25x and PXA27x USB device controller register definitions are different. Currently, they live side by side in pxa-regs.h, but only one set is available depending on the setting of PXA25x or PXA27x. This means that if we build to support both PXA25x and PXA27x, the PXA27x definitions are unavailable, even to PXA27x specific code. Remove these definitions from pxa-regs.h, and place them in separate files. Include these files where appropriate. Note: according to the dependencies in drivers/usb/gadget/Kconfig, we do not support the UDC on PXA27x nor PXA3xx CPUs, so remove the platform devices from pxa27x.c and pxa3xx.c. Signed-off-by: Russell King --- arch/arm/mach-pxa/em-x270.c | 1 + arch/arm/mach-pxa/pxa27x.c | 2 +- arch/arm/mach-pxa/pxa3xx.c | 2 +- drivers/usb/gadget/pxa2xx_udc.c | 10 +- include/asm-arm/arch-pxa/pxa-regs.h | 412 ---------------------------------- include/asm-arm/arch-pxa/pxa25x-udc.h | 163 ++++++++++++++ include/asm-arm/arch-pxa/pxa27x-udc.h | 256 +++++++++++++++++++++ 7 files changed, 430 insertions(+), 416 deletions(-) create mode 100644 include/asm-arm/arch-pxa/pxa25x-udc.h create mode 100644 include/asm-arm/arch-pxa/pxa27x-udc.h diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index edc4f07a230d..1269ac991505 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -24,6 +24,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 7e945836e129..cdaf573e0f17 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -353,7 +353,7 @@ void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info) } static struct platform_device *devices[] __initdata = { - &pxa_device_udc, +/* &pxa_device_udc, The UDC driver is PXA25x only */ &pxa_device_ffuart, &pxa_device_btuart, &pxa_device_stuart, diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 644550bfa330..7fbe78649dad 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -520,7 +520,7 @@ void __init pxa3xx_init_irq(void) */ static struct platform_device *devices[] __initdata = { - &pxa_device_udc, +/* &pxa_device_udc, The UDC driver is PXA25x only */ &pxa_device_ffuart, &pxa_device_btuart, &pxa_device_stuart, diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 08f699b1fc57..63db96adc0b0 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -46,19 +46,25 @@ #include #include #include +#include #include #include #include -#include #include #include #include -#include #include #include +/* + * This driver is PXA25x only. Grab the right register definitions. + */ +#ifdef CONFIG_ARCH_PXA +#include +#endif + #include diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 4b2ea1e95c57..68d742877308 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -599,418 +599,6 @@ #define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ -/* - * USB Device Controller - * PXA25x and PXA27x USB device controller registers are different. - */ -#if defined(CONFIG_PXA25x) - -#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ -#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ -#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ - -#define UDCCR __REG(0x40600000) /* UDC Control Register */ -#define UDCCR_UDE (1 << 0) /* UDC enable */ -#define UDCCR_UDA (1 << 1) /* UDC active */ -#define UDCCR_RSM (1 << 2) /* Device resume */ -#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ -#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ -#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ -#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ -#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ - -#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ -#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ -#define UDCCS0_IPR (1 << 1) /* IN packet ready */ -#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ -#define UDCCS0_SST (1 << 4) /* Sent stall */ -#define UDCCS0_FST (1 << 5) /* Force stall */ -#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ -#define UDCCS0_SA (1 << 7) /* Setup active */ - -/* Bulk IN - Endpoint 1,6,11 */ -#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ - -#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_BI_SST (1 << 4) /* Sent stall */ -#define UDCCS_BI_FST (1 << 5) /* Force stall */ -#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ - -/* Bulk OUT - Endpoint 2,7,12 */ -#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ - -#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_BO_DME (1 << 3) /* DMA enable */ -#define UDCCS_BO_SST (1 << 4) /* Sent stall */ -#define UDCCS_BO_FST (1 << 5) /* Force stall */ -#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ - -/* Isochronous IN - Endpoint 3,8,13 */ -#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ - -#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ - -/* Isochronous OUT - Endpoint 4,9,14 */ -#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ - -#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */ -#define UDCCS_IO_DME (1 << 3) /* DMA enable */ -#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ - -/* Interrupt IN - Endpoint 5,10,15 */ -#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ - -#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_INT_SST (1 << 4) /* Sent stall */ -#define UDCCS_INT_FST (1 << 5) /* Force stall */ -#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ - -#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ -#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ -#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ -#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ -#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ -#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ -#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ -#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ -#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */ -#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */ -#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */ -#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ -#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ -#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ -#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ -#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ -#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ -#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ -#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ -#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ -#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ -#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ -#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ -#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ - -#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ - -#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ -#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ -#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ -#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ -#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ -#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ -#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ -#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ - -#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ - -#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ -#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ -#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ -#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ -#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ -#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ -#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ -#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ - -#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ - -#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ -#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ -#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ -#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ -#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ -#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ -#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ -#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ - -#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ - -#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ -#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ -#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ -#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ -#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ -#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ -#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ -#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ - -#elif defined(CONFIG_PXA27x) - -#define UDCCR __REG(0x40600000) /* UDC Control Register */ -#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ -#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation - Protocol Port Support */ -#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol - Support */ -#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol - Enable */ -#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ -#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ -#define UDCCR_ACN_S 11 -#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ -#define UDCCR_AIN_S 8 -#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface - Setting Number */ -#define UDCCR_AAISN_S 5 -#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active - Configuration */ -#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration - Error */ -#define UDCCR_UDR (1 << 2) /* UDC Resume */ -#define UDCCR_UDA (1 << 1) /* UDC Active */ -#define UDCCR_UDE (1 << 0) /* UDC Enable */ - -#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */ -#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */ -#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ -#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ - -#define UDC_INT_FIFOERROR (0x2) -#define UDC_INT_PACKETCMP (0x1) - -#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ -#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ -#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ -#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ -#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ - -#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ -#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ -#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */ -#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */ -#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */ -#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */ -#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */ - -#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ -#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ -#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ -#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt - Rising Edge Interrupt Enable */ -#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt - Falling Edge Interrupt Enable */ -#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge - Interrupt Enable */ -#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising - Edge Interrupt Enable */ -#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling - Edge Interrupt Enable */ -#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge - Interrupt Enable */ -#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge - Interrupt Enable */ - -#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */ - -#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */ -#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */ -#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */ -#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */ -#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */ -#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */ -#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */ -#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */ -#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */ -#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */ -#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ -#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */ -#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */ -#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */ - -#define UDCCSN(x) __REG2(0x40600100, (x) << 2) -#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ -#define UDCCSR0_SA (1 << 7) /* Setup Active */ -#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ -#define UDCCSR0_FST (1 << 5) /* Force Stall */ -#define UDCCSR0_SST (1 << 4) /* Sent Stall */ -#define UDCCSR0_DME (1 << 3) /* DMA Enable */ -#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ -#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ -#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ - -#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */ -#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */ -#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */ -#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */ -#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */ -#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */ -#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */ -#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */ -#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */ -#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */ -#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */ -#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */ -#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */ -#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */ -#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */ -#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */ -#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */ -#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */ -#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */ -#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */ -#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */ -#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */ -#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */ - -#define UDCCSR_DPE (1 << 9) /* Data Packet Error */ -#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ -#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ -#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ -#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ -#define UDCCSR_FST (1 << 5) /* Force STALL */ -#define UDCCSR_SST (1 << 4) /* Sent STALL */ -#define UDCCSR_DME (1 << 3) /* DMA Enable */ -#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ -#define UDCCSR_PC (1 << 1) /* Packet Complete */ -#define UDCCSR_FS (1 << 0) /* FIFO needs service */ - -#define UDCBCN(x) __REG2(0x40600200, (x)<<2) -#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */ -#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */ -#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */ -#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */ -#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */ -#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */ -#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */ -#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */ -#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */ -#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */ -#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */ -#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */ -#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */ -#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */ -#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */ -#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */ -#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */ -#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */ -#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */ -#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */ -#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */ -#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */ -#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */ -#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */ - -#define UDCDN(x) __REG2(0x40600300, (x)<<2) -#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2)) -#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x)))) -#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */ -#define UDCDRA __REG(0x40600304) /* Data Register - EPA */ -#define UDCDRB __REG(0x40600308) /* Data Register - EPB */ -#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */ -#define UDCDRD __REG(0x40600310) /* Data Register - EPD */ -#define UDCDRE __REG(0x40600314) /* Data Register - EPE */ -#define UDCDRF __REG(0x40600318) /* Data Register - EPF */ -#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */ -#define UDCDRH __REG(0x40600320) /* Data Register - EPH */ -#define UDCDRI __REG(0x40600324) /* Data Register - EPI */ -#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */ -#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */ -#define UDCDRL __REG(0x40600330) /* Data Register - EPL */ -#define UDCDRM __REG(0x40600334) /* Data Register - EPM */ -#define UDCDRN __REG(0x40600338) /* Data Register - EPN */ -#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */ -#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */ -#define UDCDRR __REG(0x40600344) /* Data Register - EPR */ -#define UDCDRS __REG(0x40600348) /* Data Register - EPS */ -#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */ -#define UDCDRU __REG(0x40600350) /* Data Register - EPU */ -#define UDCDRV __REG(0x40600354) /* Data Register - EPV */ -#define UDCDRW __REG(0x40600358) /* Data Register - EPW */ -#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */ - -#define UDCCN(x) __REG2(0x40600400, (x)<<2) -#define UDCCRA __REG(0x40600404) /* Configuration register EPA */ -#define UDCCRB __REG(0x40600408) /* Configuration register EPB */ -#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */ -#define UDCCRD __REG(0x40600410) /* Configuration register EPD */ -#define UDCCRE __REG(0x40600414) /* Configuration register EPE */ -#define UDCCRF __REG(0x40600418) /* Configuration register EPF */ -#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */ -#define UDCCRH __REG(0x40600420) /* Configuration register EPH */ -#define UDCCRI __REG(0x40600424) /* Configuration register EPI */ -#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */ -#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */ -#define UDCCRL __REG(0x40600430) /* Configuration register EPL */ -#define UDCCRM __REG(0x40600434) /* Configuration register EPM */ -#define UDCCRN __REG(0x40600438) /* Configuration register EPN */ -#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */ -#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */ -#define UDCCRR __REG(0x40600444) /* Configuration register EPR */ -#define UDCCRS __REG(0x40600448) /* Configuration register EPS */ -#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */ -#define UDCCRU __REG(0x40600450) /* Configuration register EPU */ -#define UDCCRV __REG(0x40600454) /* Configuration register EPV */ -#define UDCCRW __REG(0x40600458) /* Configuration register EPW */ -#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */ - -#define UDCCONR_CN (0x03 << 25) /* Configuration Number */ -#define UDCCONR_CN_S (25) -#define UDCCONR_IN (0x07 << 22) /* Interface Number */ -#define UDCCONR_IN_S (22) -#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ -#define UDCCONR_AISN_S (19) -#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ -#define UDCCONR_EN_S (15) -#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ -#define UDCCONR_ET_S (13) -#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ -#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ -#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ -#define UDCCONR_ET_NU (0x00 << 13) /* Not used */ -#define UDCCONR_ED (1 << 12) /* Endpoint Direction */ -#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ -#define UDCCONR_MPS_S (2) -#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ -#define UDCCONR_EE (1 << 0) /* Endpoint Enable */ - - -#define UDC_INT_FIFOERROR (0x2) -#define UDC_INT_PACKETCMP (0x1) - -#define UDC_FNR_MASK (0x7ff) - -#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST) -#define UDC_BCR_MASK (0x3ff) -#endif - /* * Fast Infrared Communication Port */ diff --git a/include/asm-arm/arch-pxa/pxa25x-udc.h b/include/asm-arm/arch-pxa/pxa25x-udc.h new file mode 100644 index 000000000000..840305916b6d --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa25x-udc.h @@ -0,0 +1,163 @@ +#ifndef _ASM_ARCH_PXA25X_UDC_H +#define _ASM_ARCH_PXA25X_UDC_H + +#ifdef _ASM_ARCH_PXA27X_UDC_H +#error You can't include both PXA25x and PXA27x UDC support +#endif + +#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */ +#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */ +#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */ + +#define UDCCR __REG(0x40600000) /* UDC Control Register */ +#define UDCCR_UDE (1 << 0) /* UDC enable */ +#define UDCCR_UDA (1 << 1) /* UDC active */ +#define UDCCR_RSM (1 << 2) /* Device resume */ +#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */ +#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */ +#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */ +#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */ +#define UDCCR_REM (1 << 7) /* Reset interrupt mask */ + +#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */ +#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ +#define UDCCS0_IPR (1 << 1) /* IN packet ready */ +#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */ +#define UDCCS0_SST (1 << 4) /* Sent stall */ +#define UDCCS0_FST (1 << 5) /* Force stall */ +#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ +#define UDCCS0_SA (1 << 7) /* Setup active */ + +/* Bulk IN - Endpoint 1,6,11 */ +#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */ +#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ +#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ + +#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_BI_SST (1 << 4) /* Sent stall */ +#define UDCCS_BI_FST (1 << 5) /* Force stall */ +#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ + +/* Bulk OUT - Endpoint 2,7,12 */ +#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */ +#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ +#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ + +#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ +#define UDCCS_BO_DME (1 << 3) /* DMA enable */ +#define UDCCS_BO_SST (1 << 4) /* Sent stall */ +#define UDCCS_BO_FST (1 << 5) /* Force stall */ +#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ + +/* Isochronous IN - Endpoint 3,8,13 */ +#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ +#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ +#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ + +#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ + +/* Isochronous OUT - Endpoint 4,9,14 */ +#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ +#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ +#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ + +#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ +#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ +#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */ +#define UDCCS_IO_DME (1 << 3) /* DMA enable */ +#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ +#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ + +/* Interrupt IN - Endpoint 5,10,15 */ +#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ +#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ +#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ + +#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ +#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ +#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ +#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ +#define UDCCS_INT_SST (1 << 4) /* Sent stall */ +#define UDCCS_INT_FST (1 << 5) /* Force stall */ +#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ + +#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ +#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */ +#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */ +#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ +#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ +#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ +#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ +#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ +#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */ +#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */ +#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */ +#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ +#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ +#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ +#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ +#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ +#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ +#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ +#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ +#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ +#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ +#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ +#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ +#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ + +#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */ + +#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ +#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ +#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ +#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ +#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ +#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ +#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ +#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ + +#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */ + +#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ +#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ +#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ +#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ +#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ +#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ +#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ +#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ + +#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */ + +#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */ +#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */ +#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */ +#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */ +#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */ +#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */ +#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */ +#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */ + +#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */ + +#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */ +#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */ +#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */ +#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */ +#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */ +#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */ +#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */ +#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */ + +#endif diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h new file mode 100644 index 000000000000..9cf0b1f88112 --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa27x-udc.h @@ -0,0 +1,256 @@ +#ifndef _ASM_ARCH_PXA27X_UDC_H +#define _ASM_ARCH_PXA27X_UDC_H + +#ifdef _ASM_ARCH_PXA25X_UDC_H +#error You can't include both PXA25x and PXA27x UDC support +#endif + +#define UDCCR __REG(0x40600000) /* UDC Control Register */ +#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ +#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation + Protocol Port Support */ +#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol + Support */ +#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol + Enable */ +#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ +#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ +#define UDCCR_ACN_S 11 +#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ +#define UDCCR_AIN_S 8 +#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface + Setting Number */ +#define UDCCR_AAISN_S 5 +#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active + Configuration */ +#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration + Error */ +#define UDCCR_UDR (1 << 2) /* UDC Resume */ +#define UDCCR_UDA (1 << 1) /* UDC Active */ +#define UDCCR_UDE (1 << 0) /* UDC Enable */ + +#define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */ +#define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */ +#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ +#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ + +#define UDC_INT_FIFOERROR (0x2) +#define UDC_INT_PACKETCMP (0x1) + +#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) +#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ +#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ +#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ +#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ +#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ + +#define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ +#define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ +#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) +#define UDCISR1_IRCC (1 << 31) /* IntReq - Configuration Change */ +#define UDCISR1_IRSOF (1 << 30) /* IntReq - Start of Frame */ +#define UDCISR1_IRRU (1 << 29) /* IntReq - Resume */ +#define UDCISR1_IRSU (1 << 28) /* IntReq - Suspend */ +#define UDCISR1_IRRS (1 << 27) /* IntReq - Reset */ + +#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ +#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ +#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ +#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt + Rising Edge Interrupt Enable */ +#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt + Falling Edge Interrupt Enable */ +#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge + Interrupt Enable */ +#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising + Edge Interrupt Enable */ +#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling + Edge Interrupt Enable */ +#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge + Interrupt Enable */ +#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge + Interrupt Enable */ + +#define UP2OCR __REG(0x40600020) /* USB Port 2 Output Control register */ + +#define UP2OCR_CPVEN (1 << 0) /* Charge Pump Vbus Enable */ +#define UP2OCR_CPVPE (1 << 1) /* Charge Pump Vbus Pulse Enable */ +#define UP2OCR_DPPDE (1 << 2) /* Host Port 2 Transceiver D+ Pull Down Enable */ +#define UP2OCR_DMPDE (1 << 3) /* Host Port 2 Transceiver D- Pull Down Enable */ +#define UP2OCR_DPPUE (1 << 4) /* Host Port 2 Transceiver D+ Pull Up Enable */ +#define UP2OCR_DMPUE (1 << 5) /* Host Port 2 Transceiver D- Pull Up Enable */ +#define UP2OCR_DPPUBE (1 << 6) /* Host Port 2 Transceiver D+ Pull Up Bypass Enable */ +#define UP2OCR_DMPUBE (1 << 7) /* Host Port 2 Transceiver D- Pull Up Bypass Enable */ +#define UP2OCR_EXSP (1 << 8) /* External Transceiver Speed Control */ +#define UP2OCR_EXSUS (1 << 9) /* External Transceiver Speed Enable */ +#define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ +#define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */ +#define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */ +#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */ + +#define UDCCSN(x) __REG2(0x40600100, (x) << 2) +#define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ +#define UDCCSR0_SA (1 << 7) /* Setup Active */ +#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ +#define UDCCSR0_FST (1 << 5) /* Force Stall */ +#define UDCCSR0_SST (1 << 4) /* Sent Stall */ +#define UDCCSR0_DME (1 << 3) /* DMA Enable */ +#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ +#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ +#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ + +#define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */ +#define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */ +#define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */ +#define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */ +#define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */ +#define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */ +#define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */ +#define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */ +#define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */ +#define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */ +#define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */ +#define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */ +#define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */ +#define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */ +#define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */ +#define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */ +#define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */ +#define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */ +#define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */ +#define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */ +#define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */ +#define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */ +#define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */ + +#define UDCCSR_DPE (1 << 9) /* Data Packet Error */ +#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ +#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ +#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ +#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ +#define UDCCSR_FST (1 << 5) /* Force STALL */ +#define UDCCSR_SST (1 << 4) /* Sent STALL */ +#define UDCCSR_DME (1 << 3) /* DMA Enable */ +#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ +#define UDCCSR_PC (1 << 1) /* Packet Complete */ +#define UDCCSR_FS (1 << 0) /* FIFO needs service */ + +#define UDCBCN(x) __REG2(0x40600200, (x)<<2) +#define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */ +#define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */ +#define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */ +#define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */ +#define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */ +#define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */ +#define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */ +#define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */ +#define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */ +#define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */ +#define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */ +#define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */ +#define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */ +#define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */ +#define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */ +#define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */ +#define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */ +#define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */ +#define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */ +#define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */ +#define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */ +#define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */ +#define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */ +#define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */ + +#define UDCDN(x) __REG2(0x40600300, (x)<<2) +#define PHYS_UDCDN(x) (0x40600300 + ((x)<<2)) +#define PUDCDN(x) (volatile u32 *)(io_p2v(PHYS_UDCDN((x)))) +#define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */ +#define UDCDRA __REG(0x40600304) /* Data Register - EPA */ +#define UDCDRB __REG(0x40600308) /* Data Register - EPB */ +#define UDCDRC __REG(0x4060030C) /* Data Register - EPC */ +#define UDCDRD __REG(0x40600310) /* Data Register - EPD */ +#define UDCDRE __REG(0x40600314) /* Data Register - EPE */ +#define UDCDRF __REG(0x40600318) /* Data Register - EPF */ +#define UDCDRG __REG(0x4060031C) /* Data Register - EPG */ +#define UDCDRH __REG(0x40600320) /* Data Register - EPH */ +#define UDCDRI __REG(0x40600324) /* Data Register - EPI */ +#define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */ +#define UDCDRK __REG(0x4060032C) /* Data Register - EPK */ +#define UDCDRL __REG(0x40600330) /* Data Register - EPL */ +#define UDCDRM __REG(0x40600334) /* Data Register - EPM */ +#define UDCDRN __REG(0x40600338) /* Data Register - EPN */ +#define UDCDRP __REG(0x4060033C) /* Data Register - EPP */ +#define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */ +#define UDCDRR __REG(0x40600344) /* Data Register - EPR */ +#define UDCDRS __REG(0x40600348) /* Data Register - EPS */ +#define UDCDRT __REG(0x4060034C) /* Data Register - EPT */ +#define UDCDRU __REG(0x40600350) /* Data Register - EPU */ +#define UDCDRV __REG(0x40600354) /* Data Register - EPV */ +#define UDCDRW __REG(0x40600358) /* Data Register - EPW */ +#define UDCDRX __REG(0x4060035C) /* Data Register - EPX */ + +#define UDCCN(x) __REG2(0x40600400, (x)<<2) +#define UDCCRA __REG(0x40600404) /* Configuration register EPA */ +#define UDCCRB __REG(0x40600408) /* Configuration register EPB */ +#define UDCCRC __REG(0x4060040C) /* Configuration register EPC */ +#define UDCCRD __REG(0x40600410) /* Configuration register EPD */ +#define UDCCRE __REG(0x40600414) /* Configuration register EPE */ +#define UDCCRF __REG(0x40600418) /* Configuration register EPF */ +#define UDCCRG __REG(0x4060041C) /* Configuration register EPG */ +#define UDCCRH __REG(0x40600420) /* Configuration register EPH */ +#define UDCCRI __REG(0x40600424) /* Configuration register EPI */ +#define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */ +#define UDCCRK __REG(0x4060042C) /* Configuration register EPK */ +#define UDCCRL __REG(0x40600430) /* Configuration register EPL */ +#define UDCCRM __REG(0x40600434) /* Configuration register EPM */ +#define UDCCRN __REG(0x40600438) /* Configuration register EPN */ +#define UDCCRP __REG(0x4060043C) /* Configuration register EPP */ +#define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */ +#define UDCCRR __REG(0x40600444) /* Configuration register EPR */ +#define UDCCRS __REG(0x40600448) /* Configuration register EPS */ +#define UDCCRT __REG(0x4060044C) /* Configuration register EPT */ +#define UDCCRU __REG(0x40600450) /* Configuration register EPU */ +#define UDCCRV __REG(0x40600454) /* Configuration register EPV */ +#define UDCCRW __REG(0x40600458) /* Configuration register EPW */ +#define UDCCRX __REG(0x4060045C) /* Configuration register EPX */ + +#define UDCCONR_CN (0x03 << 25) /* Configuration Number */ +#define UDCCONR_CN_S (25) +#define UDCCONR_IN (0x07 << 22) /* Interface Number */ +#define UDCCONR_IN_S (22) +#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ +#define UDCCONR_AISN_S (19) +#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ +#define UDCCONR_EN_S (15) +#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ +#define UDCCONR_ET_S (13) +#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ +#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ +#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ +#define UDCCONR_ET_NU (0x00 << 13) /* Not used */ +#define UDCCONR_ED (1 << 12) /* Endpoint Direction */ +#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ +#define UDCCONR_MPS_S (2) +#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ +#define UDCCONR_EE (1 << 0) /* Endpoint Enable */ + + +#define UDC_INT_FIFOERROR (0x2) +#define UDC_INT_PACKETCMP (0x1) + +#define UDC_FNR_MASK (0x7ff) + +#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST) +#define UDC_BCR_MASK (0x3ff) + +#endif -- cgit v1.2.3 From 0be9898adb6f58fee44f0fec0bbc0eac997ea9eb Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 19 May 2008 12:31:28 +0200 Subject: [ALSA] ASoC: Clarify API for bias configuration Currently the ASoC core configures the bias levels in the system using a callback on codecs and machines called 'dapm_event', passing it PCI style power levels as SNDRV_CTL_POWER_ constants. This is more obscure than it needs to be and has caused confusion to driver authors, especially given that DAPM is also performing power management. Address this by renaming the callback function to 'set_bias_level' and using constants explicitly representing the off, standby, pre-on and on states which DAPM transitions through. Also unexport the API for setting bias level: there are currently no in-tree users of this API other than the core itself and it is likely that the core would need to be extended to cater for any users. Signed-off-by: Mark Brown Cc: Jarkko Nikula Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- include/sound/soc-dapm.h | 3 ++- include/sound/soc.h | 28 +++++++++++++++++++++++---- sound/soc/codecs/tlv320aic3x.c | 26 ++++++++++++------------- sound/soc/codecs/wm8731.c | 28 +++++++++++++-------------- sound/soc/codecs/wm8750.c | 36 +++++++++++++++++----------------- sound/soc/codecs/wm8753.c | 36 +++++++++++++++++----------------- sound/soc/codecs/wm9712.c | 28 +++++++++++++-------------- sound/soc/codecs/wm9713.c | 26 ++++++++++++------------- sound/soc/soc-core.c | 25 ++++++++++++------------ sound/soc/soc-dapm.c | 44 ++++++++++++++++++++---------------------- 10 files changed, 150 insertions(+), 130 deletions(-) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index bf4cf0c1d37f..f8223fae5804 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -221,7 +221,8 @@ int snd_soc_dapm_add_routes(struct snd_soc_codec *codec, /* dapm events */ int snd_soc_dapm_stream_event(struct snd_soc_codec *codec, char *stream, int event); -int snd_soc_dapm_device_event(struct snd_soc_device *socdev, int event); +int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev, + enum snd_soc_bias_level level); /* dapm sys fs - used by the core */ int snd_soc_dapm_sys_add(struct device *dev); diff --git a/include/sound/soc.h b/include/sound/soc.h index 73accbcfbd2d..bca9538d9e50 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -102,6 +102,24 @@ .get = xhandler_get, .put = xhandler_put, \ .private_value = (unsigned long)&xenum } +/* + * Bias levels + * + * @ON: Bias is fully on for audio playback and capture operations. + * @PREPARE: Prepare for audio operations. Called before DAPM switching for + * stream start and stop operations. + * @STANDBY: Low power standby state when no playback/capture operations are + * in progress. NOTE: The transition time between STANDBY and ON + * should be as fast as possible and no longer than 10ms. + * @OFF: Power Off. No restrictions on transition times. + */ +enum snd_soc_bias_level { + SND_SOC_BIAS_ON, + SND_SOC_BIAS_PREPARE, + SND_SOC_BIAS_STANDBY, + SND_SOC_BIAS_OFF, +}; + /* * Digital Audio Interface (DAI) types */ @@ -356,7 +374,8 @@ struct snd_soc_codec { struct mutex mutex; /* callbacks */ - int (*dapm_event)(struct snd_soc_codec *codec, int event); + int (*set_bias_level)(struct snd_soc_codec *, + enum snd_soc_bias_level level); /* runtime */ struct snd_card *card; @@ -378,8 +397,8 @@ struct snd_soc_codec { /* dapm */ struct list_head dapm_widgets; struct list_head dapm_paths; - unsigned int dapm_state; - unsigned int suspend_dapm_state; + enum snd_soc_bias_level bias_level; + enum snd_soc_bias_level suspend_bias_level; struct delayed_work delayed_work; /* codec DAI's */ @@ -449,7 +468,8 @@ struct snd_soc_machine { int (*resume_post)(struct platform_device *pdev); /* callbacks */ - int (*dapm_event)(struct snd_soc_machine *, int event); + int (*set_bias_level)(struct snd_soc_machine *, + enum snd_soc_bias_level level); /* CPU <--> Codec DAI links */ struct snd_soc_dai_link *dai_link; diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index cb8365ac0c02..dc8a38d9e53a 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -847,13 +847,14 @@ static int aic3x_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, return 0; } -static int aic3x_dapm_event(struct snd_soc_codec *codec, int event) +static int aic3x_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) { struct aic3x_priv *aic3x = codec->private_data; u8 reg; - switch (event) { - case SNDRV_CTL_POWER_D0: + switch (level) { + case SND_SOC_BIAS_ON: /* all power is driven by DAPM system */ if (aic3x->master) { /* enable pll */ @@ -862,10 +863,9 @@ static int aic3x_dapm_event(struct snd_soc_codec *codec, int event) reg | PLL_ENABLE); } break; - case SNDRV_CTL_POWER_D1: - case SNDRV_CTL_POWER_D2: + case SND_SOC_BIAS_PREPARE: break; - case SNDRV_CTL_POWER_D3hot: + case SND_SOC_BIAS_STANDBY: /* * all power is driven by DAPM system, * so output power is safe if bypass was set @@ -877,7 +877,7 @@ static int aic3x_dapm_event(struct snd_soc_codec *codec, int event) reg & ~PLL_ENABLE); } break; - case SNDRV_CTL_POWER_D3cold: + case SND_SOC_BIAS_OFF: /* force all power off */ reg = aic3x_read_reg_cache(codec, LINE1L_2_LADC_CTRL); aic3x_write(codec, LINE1L_2_LADC_CTRL, reg & ~LADC_PWR_ON); @@ -913,7 +913,7 @@ static int aic3x_dapm_event(struct snd_soc_codec *codec, int event) } break; } - codec->dapm_state = event; + codec->bias_level = level; return 0; } @@ -979,7 +979,7 @@ static int aic3x_suspend(struct platform_device *pdev, pm_message_t state) struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_codec *codec = socdev->codec; - aic3x_dapm_event(codec, SNDRV_CTL_POWER_D3cold); + aic3x_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; } @@ -999,7 +999,7 @@ static int aic3x_resume(struct platform_device *pdev) codec->hw_write(codec->control_data, data, 2); } - aic3x_dapm_event(codec, codec->suspend_dapm_state); + aic3x_set_bias_level(codec, codec->suspend_bias_level); return 0; } @@ -1018,7 +1018,7 @@ static int aic3x_init(struct snd_soc_device *socdev) codec->owner = THIS_MODULE; codec->read = aic3x_read_reg_cache; codec->write = aic3x_write; - codec->dapm_event = aic3x_dapm_event; + codec->set_bias_level = aic3x_set_bias_level; codec->dai = &aic3x_dai; codec->num_dai = 1; codec->reg_cache_size = sizeof(aic3x_reg); @@ -1100,7 +1100,7 @@ static int aic3x_init(struct snd_soc_device *socdev) aic3x_write(codec, LINE2R_2_MONOLOPM_VOL, DEFAULT_VOL); /* off, with power on */ - aic3x_dapm_event(codec, SNDRV_CTL_POWER_D3hot); + aic3x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); /* setup GPIO functions */ aic3x_write(codec, AIC3X_GPIO1_REG, (setup->gpio_func[0] & 0xf) << 4); @@ -1271,7 +1271,7 @@ static int aic3x_remove(struct platform_device *pdev) /* power down chip */ if (codec->control_data) - aic3x_dapm_event(codec, SNDRV_CTL_POWER_D3); + aic3x_set_bias_level(codec, SND_SOC_BIAS_OFF); snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 0cf9265fca8f..0f28aa4bcccb 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -435,29 +435,29 @@ static int wm8731_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, return 0; } -static int wm8731_dapm_event(struct snd_soc_codec *codec, int event) +static int wm8731_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) { u16 reg = wm8731_read_reg_cache(codec, WM8731_PWR) & 0xff7f; - switch (event) { - case SNDRV_CTL_POWER_D0: /* full On */ + switch (level) { + case SND_SOC_BIAS_ON: /* vref/mid, osc on, dac unmute */ wm8731_write(codec, WM8731_PWR, reg); break; - case SNDRV_CTL_POWER_D1: /* partial On */ - case SNDRV_CTL_POWER_D2: /* partial On */ + case SND_SOC_BIAS_PREPARE: break; - case SNDRV_CTL_POWER_D3hot: /* Off, with power */ + case SND_SOC_BIAS_STANDBY: /* everything off except vref/vmid, */ wm8731_write(codec, WM8731_PWR, reg | 0x0040); break; - case SNDRV_CTL_POWER_D3cold: /* Off, without power */ + case SND_SOC_BIAS_OFF: /* everything off, dac mute, inactive */ wm8731_write(codec, WM8731_ACTIVE, 0x0); wm8731_write(codec, WM8731_PWR, 0xffff); break; } - codec->dapm_state = event; + codec->bias_level = level; return 0; } @@ -503,7 +503,7 @@ static int wm8731_suspend(struct platform_device *pdev, pm_message_t state) struct snd_soc_codec *codec = socdev->codec; wm8731_write(codec, WM8731_ACTIVE, 0x0); - wm8731_dapm_event(codec, SNDRV_CTL_POWER_D3cold); + wm8731_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; } @@ -521,8 +521,8 @@ static int wm8731_resume(struct platform_device *pdev) data[1] = cache[i] & 0x00ff; codec->hw_write(codec->control_data, data, 2); } - wm8731_dapm_event(codec, SNDRV_CTL_POWER_D3hot); - wm8731_dapm_event(codec, codec->suspend_dapm_state); + wm8731_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + wm8731_set_bias_level(codec, codec->suspend_bias_level); return 0; } @@ -539,7 +539,7 @@ static int wm8731_init(struct snd_soc_device *socdev) codec->owner = THIS_MODULE; codec->read = wm8731_read_reg_cache; codec->write = wm8731_write; - codec->dapm_event = wm8731_dapm_event; + codec->set_bias_level = wm8731_set_bias_level; codec->dai = &wm8731_dai; codec->num_dai = 1; codec->reg_cache_size = sizeof(wm8731_reg); @@ -557,7 +557,7 @@ static int wm8731_init(struct snd_soc_device *socdev) } /* power on device */ - wm8731_dapm_event(codec, SNDRV_CTL_POWER_D3hot); + wm8731_set_bias_level(codec, SND_SOC_BIAS_STANDBY); /* set the update bits */ reg = wm8731_read_reg_cache(codec, WM8731_LOUT1V); @@ -730,7 +730,7 @@ static int wm8731_remove(struct platform_device *pdev) struct snd_soc_codec *codec = socdev->codec; if (codec->control_data) - wm8731_dapm_event(codec, SNDRV_CTL_POWER_D3cold); + wm8731_set_bias_level(codec, SND_SOC_BIAS_OFF); snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c index 16cd5d4d5ad9..62423f4493b0 100644 --- a/sound/soc/codecs/wm8750.c +++ b/sound/soc/codecs/wm8750.c @@ -686,29 +686,29 @@ static int wm8750_mute(struct snd_soc_codec_dai *dai, int mute) return 0; } -static int wm8750_dapm_event(struct snd_soc_codec *codec, int event) +static int wm8750_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) { u16 pwr_reg = wm8750_read_reg_cache(codec, WM8750_PWR1) & 0xfe3e; - switch (event) { - case SNDRV_CTL_POWER_D0: /* full On */ + switch (level) { + case SND_SOC_BIAS_ON: /* set vmid to 50k and unmute dac */ wm8750_write(codec, WM8750_PWR1, pwr_reg | 0x00c0); break; - case SNDRV_CTL_POWER_D1: /* partial On */ - case SNDRV_CTL_POWER_D2: /* partial On */ + case SND_SOC_BIAS_PREPARE: /* set vmid to 5k for quick power up */ wm8750_write(codec, WM8750_PWR1, pwr_reg | 0x01c1); break; - case SNDRV_CTL_POWER_D3hot: /* Off, with power */ + case SND_SOC_BIAS_STANDBY: /* mute dac and set vmid to 500k, enable VREF */ wm8750_write(codec, WM8750_PWR1, pwr_reg | 0x0141); break; - case SNDRV_CTL_POWER_D3cold: /* Off, without power */ + case SND_SOC_BIAS_OFF: wm8750_write(codec, WM8750_PWR1, 0x0001); break; } - codec->dapm_state = event; + codec->bias_level = level; return 0; } @@ -748,7 +748,7 @@ static void wm8750_work(struct work_struct *work) { struct snd_soc_codec *codec = container_of(work, struct snd_soc_codec, delayed_work.work); - wm8750_dapm_event(codec, codec->dapm_state); + wm8750_set_bias_level(codec, codec->bias_level); } static int wm8750_suspend(struct platform_device *pdev, pm_message_t state) @@ -756,7 +756,7 @@ static int wm8750_suspend(struct platform_device *pdev, pm_message_t state) struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_codec *codec = socdev->codec; - wm8750_dapm_event(codec, SNDRV_CTL_POWER_D3cold); + wm8750_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; } @@ -777,12 +777,12 @@ static int wm8750_resume(struct platform_device *pdev) codec->hw_write(codec->control_data, data, 2); } - wm8750_dapm_event(codec, SNDRV_CTL_POWER_D3hot); + wm8750_set_bias_level(codec, SND_SOC_BIAS_STANDBY); /* charge wm8750 caps */ - if (codec->suspend_dapm_state == SNDRV_CTL_POWER_D0) { - wm8750_dapm_event(codec, SNDRV_CTL_POWER_D2); - codec->dapm_state = SNDRV_CTL_POWER_D0; + if (codec->suspend_bias_level == SND_SOC_BIAS_ON) { + wm8750_set_bias_level(codec, SND_SOC_BIAS_PREPARE); + codec->bias_level = SND_SOC_BIAS_ON; schedule_delayed_work(&codec->delayed_work, msecs_to_jiffies(1000)); } @@ -803,7 +803,7 @@ static int wm8750_init(struct snd_soc_device *socdev) codec->owner = THIS_MODULE; codec->read = wm8750_read_reg_cache; codec->write = wm8750_write; - codec->dapm_event = wm8750_dapm_event; + codec->set_bias_level = wm8750_set_bias_level; codec->dai = &wm8750_dai; codec->num_dai = 1; codec->reg_cache_size = sizeof(wm8750_reg); @@ -821,8 +821,8 @@ static int wm8750_init(struct snd_soc_device *socdev) } /* charge output caps */ - wm8750_dapm_event(codec, SNDRV_CTL_POWER_D2); - codec->dapm_state = SNDRV_CTL_POWER_D3hot; + wm8750_set_bias_level(codec, SND_SOC_BIAS_PREPARE); + codec->bias_level = SND_SOC_BIAS_STANDBY; schedule_delayed_work(&codec->delayed_work, msecs_to_jiffies(1000)); /* set the update bits */ @@ -1021,7 +1021,7 @@ static int wm8750_remove(struct platform_device *pdev) struct snd_soc_codec *codec = socdev->codec; if (codec->control_data) - wm8750_dapm_event(codec, SNDRV_CTL_POWER_D3cold); + wm8750_set_bias_level(codec, SND_SOC_BIAS_OFF); run_delayed_work(&codec->delayed_work); snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index fb41826c4c4c..9032b0c07c86 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -1274,29 +1274,29 @@ static int wm8753_mute(struct snd_soc_codec_dai *dai, int mute) return 0; } -static int wm8753_dapm_event(struct snd_soc_codec *codec, int event) +static int wm8753_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) { u16 pwr_reg = wm8753_read_reg_cache(codec, WM8753_PWR1) & 0xfe3e; - switch (event) { - case SNDRV_CTL_POWER_D0: /* full On */ + switch (level) { + case SND_SOC_BIAS_ON: /* set vmid to 50k and unmute dac */ wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x00c0); break; - case SNDRV_CTL_POWER_D1: /* partial On */ - case SNDRV_CTL_POWER_D2: /* partial On */ + case SND_SOC_BIAS_PREPARE: /* set vmid to 5k for quick power up */ wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x01c1); break; - case SNDRV_CTL_POWER_D3hot: /* Off, with power */ + case SND_SOC_BIAS_STANDBY: /* mute dac and set vmid to 500k, enable VREF */ wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x0141); break; - case SNDRV_CTL_POWER_D3cold: /* Off, without power */ + case SND_SOC_BIAS_OFF: wm8753_write(codec, WM8753_PWR1, 0x0001); break; } - codec->dapm_state = event; + codec->bias_level = level; return 0; } @@ -1500,7 +1500,7 @@ static void wm8753_work(struct work_struct *work) { struct snd_soc_codec *codec = container_of(work, struct snd_soc_codec, delayed_work.work); - wm8753_dapm_event(codec, codec->dapm_state); + wm8753_set_bias_level(codec, codec->bias_level); } static int wm8753_suspend(struct platform_device *pdev, pm_message_t state) @@ -1512,7 +1512,7 @@ static int wm8753_suspend(struct platform_device *pdev, pm_message_t state) if (!codec->card) return 0; - wm8753_dapm_event(codec, SNDRV_CTL_POWER_D3cold); + wm8753_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; } @@ -1537,12 +1537,12 @@ static int wm8753_resume(struct platform_device *pdev) codec->hw_write(codec->control_data, data, 2); } - wm8753_dapm_event(codec, SNDRV_CTL_POWER_D3hot); + wm8753_set_bias_level(codec, SND_SOC_BIAS_STANDBY); /* charge wm8753 caps */ - if (codec->suspend_dapm_state == SNDRV_CTL_POWER_D0) { - wm8753_dapm_event(codec, SNDRV_CTL_POWER_D2); - codec->dapm_state = SNDRV_CTL_POWER_D0; + if (codec->suspend_bias_level == SND_SOC_BIAS_ON) { + wm8753_set_bias_level(codec, SND_SOC_BIAS_PREPARE); + codec->bias_level = SND_SOC_BIAS_ON; schedule_delayed_work(&codec->delayed_work, msecs_to_jiffies(caps_charge)); } @@ -1563,7 +1563,7 @@ static int wm8753_init(struct snd_soc_device *socdev) codec->owner = THIS_MODULE; codec->read = wm8753_read_reg_cache; codec->write = wm8753_write; - codec->dapm_event = wm8753_dapm_event; + codec->set_bias_level = wm8753_set_bias_level; codec->dai = wm8753_dai; codec->num_dai = 2; codec->reg_cache_size = sizeof(wm8753_reg); @@ -1584,8 +1584,8 @@ static int wm8753_init(struct snd_soc_device *socdev) } /* charge output caps */ - wm8753_dapm_event(codec, SNDRV_CTL_POWER_D2); - codec->dapm_state = SNDRV_CTL_POWER_D3hot; + wm8753_set_bias_level(codec, SND_SOC_BIAS_PREPARE); + codec->bias_level = SND_SOC_BIAS_STANDBY; schedule_delayed_work(&codec->delayed_work, msecs_to_jiffies(caps_charge)); @@ -1792,7 +1792,7 @@ static int wm8753_remove(struct platform_device *pdev) struct snd_soc_codec *codec = socdev->codec; if (codec->control_data) - wm8753_dapm_event(codec, SNDRV_CTL_POWER_D3cold); + wm8753_set_bias_level(codec, SND_SOC_BIAS_OFF); run_delayed_work(&codec->delayed_work); snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 89efe40c7c33..e26cfcf0b4fc 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -571,23 +571,23 @@ struct snd_soc_codec_dai wm9712_dai[] = { }; EXPORT_SYMBOL_GPL(wm9712_dai); -static int wm9712_dapm_event(struct snd_soc_codec *codec, int event) +static int wm9712_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) { - switch (event) { - case SNDRV_CTL_POWER_D0: /* full On */ - case SNDRV_CTL_POWER_D1: /* partial On */ - case SNDRV_CTL_POWER_D2: /* partial On */ + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: break; - case SNDRV_CTL_POWER_D3hot: /* Off, with power */ + case SND_SOC_BIAS_STANDBY: ac97_write(codec, AC97_POWERDOWN, 0x0000); break; - case SNDRV_CTL_POWER_D3cold: /* Off, without power */ + case SND_SOC_BIAS_OFF: /* disable everything including AC link */ ac97_write(codec, AC97_EXTENDED_MSTATUS, 0xffff); ac97_write(codec, AC97_POWERDOWN, 0xffff); break; } - codec->dapm_state = event; + codec->bias_level = level; return 0; } @@ -615,7 +615,7 @@ static int wm9712_soc_suspend(struct platform_device *pdev, struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_codec *codec = socdev->codec; - wm9712_dapm_event(codec, SNDRV_CTL_POWER_D3cold); + wm9712_set_bias_level(codec, SND_SOC_BIAS_OFF); return 0; } @@ -632,7 +632,7 @@ static int wm9712_soc_resume(struct platform_device *pdev) return ret; } - wm9712_dapm_event(codec, SNDRV_CTL_POWER_D3hot); + wm9712_set_bias_level(codec, SND_SOC_BIAS_STANDBY); if (ret == 0) { /* Sync reg_cache with the hardware after cold reset */ @@ -644,8 +644,8 @@ static int wm9712_soc_resume(struct platform_device *pdev) } } - if (codec->suspend_dapm_state == SNDRV_CTL_POWER_D0) - wm9712_dapm_event(codec, SNDRV_CTL_POWER_D0); + if (codec->suspend_bias_level == SND_SOC_BIAS_ON) + wm9712_set_bias_level(codec, SND_SOC_BIAS_ON); return ret; } @@ -679,7 +679,7 @@ static int wm9712_soc_probe(struct platform_device *pdev) codec->num_dai = ARRAY_SIZE(wm9712_dai); codec->write = ac97_write; codec->read = ac97_read; - codec->dapm_event = wm9712_dapm_event; + codec->set_bias_level = wm9712_set_bias_level; INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -703,7 +703,7 @@ static int wm9712_soc_probe(struct platform_device *pdev) /* set alc mux to none */ ac97_write(codec, AC97_VIDEO, ac97_read(codec, AC97_VIDEO) | 0x3000); - wm9712_dapm_event(codec, SNDRV_CTL_POWER_D3hot); + wm9712_set_bias_level(codec, SND_SOC_BIAS_STANDBY); wm9712_add_controls(codec); wm9712_add_widgets(codec); ret = snd_soc_register_card(socdev); diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index 9e6b2fd7262b..4863636e9d56 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -1094,33 +1094,33 @@ int wm9713_reset(struct snd_soc_codec *codec, int try_warm) } EXPORT_SYMBOL_GPL(wm9713_reset); -static int wm9713_dapm_event(struct snd_soc_codec *codec, int event) +static int wm9713_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) { u16 reg; - switch (event) { - case SNDRV_CTL_POWER_D0: /* full On */ + switch (level) { + case SND_SOC_BIAS_ON: /* enable thermal shutdown */ reg = ac97_read(codec, AC97_EXTENDED_MID) & 0x1bff; ac97_write(codec, AC97_EXTENDED_MID, reg); break; - case SNDRV_CTL_POWER_D1: /* partial On */ - case SNDRV_CTL_POWER_D2: /* partial On */ + case SND_SOC_BIAS_PREPARE: break; - case SNDRV_CTL_POWER_D3hot: /* Off, with power */ + case SND_SOC_BIAS_STANDBY: /* enable master bias and vmid */ reg = ac97_read(codec, AC97_EXTENDED_MID) & 0x3bff; ac97_write(codec, AC97_EXTENDED_MID, reg); ac97_write(codec, AC97_POWERDOWN, 0x0000); break; - case SNDRV_CTL_POWER_D3cold: /* Off, without power */ + case SND_SOC_BIAS_OFF: /* disable everything including AC link */ ac97_write(codec, AC97_EXTENDED_MID, 0xffff); ac97_write(codec, AC97_EXTENDED_MSTATUS, 0xffff); ac97_write(codec, AC97_POWERDOWN, 0xffff); break; } - codec->dapm_state = event; + codec->bias_level = level; return 0; } @@ -1157,7 +1157,7 @@ static int wm9713_soc_resume(struct platform_device *pdev) return ret; } - wm9713_dapm_event(codec, SNDRV_CTL_POWER_D3hot); + wm9713_set_bias_level(codec, SND_SOC_BIAS_STANDBY); /* do we need to re-start the PLL ? */ if (wm9713->pll_out) @@ -1173,8 +1173,8 @@ static int wm9713_soc_resume(struct platform_device *pdev) } } - if (codec->suspend_dapm_state == SNDRV_CTL_POWER_D0) - wm9713_dapm_event(codec, SNDRV_CTL_POWER_D0); + if (codec->suspend_bias_level == SND_SOC_BIAS_ON) + wm9713_set_bias_level(codec, SND_SOC_BIAS_ON); return ret; } @@ -1213,7 +1213,7 @@ static int wm9713_soc_probe(struct platform_device *pdev) codec->num_dai = ARRAY_SIZE(wm9713_dai); codec->write = ac97_write; codec->read = ac97_read; - codec->dapm_event = wm9713_dapm_event; + codec->set_bias_level = wm9713_set_bias_level; INIT_LIST_HEAD(&codec->dapm_widgets); INIT_LIST_HEAD(&codec->dapm_paths); @@ -1235,7 +1235,7 @@ static int wm9713_soc_probe(struct platform_device *pdev) goto reset_err; } - wm9713_dapm_event(codec, SNDRV_CTL_POWER_D3hot); + wm9713_set_bias_level(codec, SND_SOC_BIAS_STANDBY); /* unmute the adc - move to kcontrol */ reg = ac97_read(codec, AC97_CD) & 0x7fff; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 0318d8abe3e8..a05b3450aee8 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -283,12 +283,12 @@ static void close_delayed_work(struct work_struct *work) /* are we waiting on this codec DAI stream */ if (codec_dai->pop_wait == 1) { - /* power down the codec to D1 if no longer active */ + /* Reduce power if no longer active */ if (codec->active == 0) { dbg("pop wq D1 %s %s\n", codec->name, codec_dai->playback.stream_name); - snd_soc_dapm_device_event(socdev, - SNDRV_CTL_POWER_D1); + snd_soc_dapm_set_bias_level(socdev, + SND_SOC_BIAS_PREPARE); } codec_dai->pop_wait = 0; @@ -296,12 +296,12 @@ static void close_delayed_work(struct work_struct *work) codec_dai->playback.stream_name, SND_SOC_DAPM_STREAM_STOP); - /* power down the codec power domain if no longer active */ + /* Fall into standby if no longer active */ if (codec->active == 0) { dbg("pop wq D3 %s %s\n", codec->name, codec_dai->playback.stream_name); - snd_soc_dapm_device_event(socdev, - SNDRV_CTL_POWER_D3hot); + snd_soc_dapm_set_bias_level(socdev, + SND_SOC_BIAS_STANDBY); } } } @@ -361,8 +361,8 @@ static int soc_codec_close(struct snd_pcm_substream *substream) SND_SOC_DAPM_STREAM_STOP); if (codec->active == 0 && codec_dai->pop_wait == 0) - snd_soc_dapm_device_event(socdev, - SNDRV_CTL_POWER_D3hot); + snd_soc_dapm_set_bias_level(socdev, + SND_SOC_BIAS_STANDBY); } mutex_unlock(&pcm_mutex); @@ -435,9 +435,10 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream) } } else { /* no delayed work - do we need to power up codec */ - if (codec->dapm_state != SNDRV_CTL_POWER_D0) { + if (codec->bias_level != SND_SOC_BIAS_ON) { - snd_soc_dapm_device_event(socdev, SNDRV_CTL_POWER_D1); + snd_soc_dapm_set_bias_level(socdev, + SND_SOC_BIAS_PREPARE); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) snd_soc_dapm_stream_event(codec, @@ -448,7 +449,7 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream) codec_dai->capture.stream_name, SND_SOC_DAPM_STREAM_START); - snd_soc_dapm_device_event(socdev, SNDRV_CTL_POWER_D0); + snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_ON); if (codec_dai->dai_ops.digital_mute) codec_dai->dai_ops.digital_mute(codec_dai, 0); @@ -658,7 +659,7 @@ static int soc_suspend(struct platform_device *pdev, pm_message_t state) /* close any waiting streams and save state */ run_delayed_work(&socdev->delayed_work); - codec->suspend_dapm_state = codec->dapm_state; + codec->suspend_bias_level = codec->bias_level; for(i = 0; i < codec->num_dai; i++) { char *stream = codec->dai[i].playback.stream_name; diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 8a3192bcee78..728f3ac2f304 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -763,21 +763,18 @@ static ssize_t dapm_widget_show(struct device *dev, } } - switch(codec->dapm_state){ - case SNDRV_CTL_POWER_D0: - state = "D0"; + switch (codec->bias_level) { + case SND_SOC_BIAS_ON: + state = "On"; break; - case SNDRV_CTL_POWER_D1: - state = "D1"; + case SND_SOC_BIAS_PREPARE: + state = "Prepare"; break; - case SNDRV_CTL_POWER_D2: - state = "D2"; + case SND_SOC_BIAS_STANDBY: + state = "Standby"; break; - case SNDRV_CTL_POWER_D3hot: - state = "D3hot"; - break; - case SNDRV_CTL_POWER_D3cold: - state = "D3cold"; + case SND_SOC_BIAS_OFF: + state = "Off"; break; } count += sprintf(buf + count, "PM State: %s\n", state); @@ -1358,27 +1355,28 @@ int snd_soc_dapm_stream_event(struct snd_soc_codec *codec, EXPORT_SYMBOL_GPL(snd_soc_dapm_stream_event); /** - * snd_soc_dapm_device_event - send a device event to the dapm core + * snd_soc_dapm_set_bias_level - set the bias level for the system * @socdev: audio device - * @event: device event + * @level: level to configure * - * Sends a device event to the dapm core. The core then makes any - * necessary machine or codec power changes.. + * Configure the bias (power) levels for the SoC audio device. * * Returns 0 for success else error. */ -int snd_soc_dapm_device_event(struct snd_soc_device *socdev, int event) +int snd_soc_dapm_set_bias_level(struct snd_soc_device *socdev, + enum snd_soc_bias_level level) { struct snd_soc_codec *codec = socdev->codec; struct snd_soc_machine *machine = socdev->machine; + int ret = 0; - if (machine->dapm_event) - machine->dapm_event(machine, event); - if (codec->dapm_event) - codec->dapm_event(codec, event); - return 0; + if (machine->set_bias_level) + ret = machine->set_bias_level(machine, level); + if (ret == 0 && codec->set_bias_level) + ret = codec->set_bias_level(codec, level); + + return ret; } -EXPORT_SYMBOL_GPL(snd_soc_dapm_device_event); /** * snd_soc_dapm_set_endpoint - set audio endpoint status -- cgit v1.2.3 From 3ff3f64ba04b3e5a86dce5239b10268798f68ad7 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 19 May 2008 12:32:25 +0200 Subject: [ALSA] ASoC: core checkpatch cleanups Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/soc-core.c | 100 +++++++++++++++++++++++++++------------------------ 1 file changed, 54 insertions(+), 46 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index a05b3450aee8..a3f091e0843a 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -108,9 +108,9 @@ static int soc_ac97_dev_register(struct snd_soc_codec *codec) } #endif -static inline const char* get_dai_name(int type) +static inline const char *get_dai_name(int type) { - switch(type) { + switch (type) { case SND_SOC_DAI_AC97_BUS: case SND_SOC_DAI_AC97: return "AC97"; @@ -178,9 +178,11 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) /* Check that the codec and cpu DAI's are compatible */ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { runtime->hw.rate_min = - max(codec_dai->playback.rate_min, cpu_dai->playback.rate_min); + max(codec_dai->playback.rate_min, + cpu_dai->playback.rate_min); runtime->hw.rate_max = - min(codec_dai->playback.rate_max, cpu_dai->playback.rate_max); + min(codec_dai->playback.rate_max, + cpu_dai->playback.rate_max); runtime->hw.channels_min = max(codec_dai->playback.channels_min, cpu_dai->playback.channels_min); @@ -193,9 +195,11 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) codec_dai->playback.rates & cpu_dai->playback.rates; } else { runtime->hw.rate_min = - max(codec_dai->capture.rate_min, cpu_dai->capture.rate_min); + max(codec_dai->capture.rate_min, + cpu_dai->capture.rate_min); runtime->hw.rate_max = - min(codec_dai->capture.rate_max, cpu_dai->capture.rate_max); + min(codec_dai->capture.rate_max, + cpu_dai->capture.rate_max); runtime->hw.channels_min = max(codec_dai->capture.channels_min, cpu_dai->capture.channels_min); @@ -225,7 +229,7 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) goto machine_err; } - dbg("asoc: %s <-> %s info:\n",codec_dai->name, cpu_dai->name); + dbg("asoc: %s <-> %s info:\n", codec_dai->name, cpu_dai->name); dbg("asoc: rate mask 0x%x\n", runtime->hw.rates); dbg("asoc: min ch %d max ch %d\n", runtime->hw.channels_min, runtime->hw.channels_max); @@ -272,7 +276,7 @@ static void close_delayed_work(struct work_struct *work) int i; mutex_lock(&pcm_mutex); - for(i = 0; i < codec->num_dai; i++) { + for (i = 0; i < codec->num_dai; i++) { codec_dai = &codec->dai[i]; dbg("pop wq checking: %s status: %s waiting: %s\n", @@ -511,7 +515,7 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream, if (cpu_dai->ops.hw_params) { ret = cpu_dai->ops.hw_params(substream, params); if (ret < 0) { - printk(KERN_ERR "asoc: can't set interface %s hw params\n", + printk(KERN_ERR "asoc: interface %s hw params failed\n", cpu_dai->name); goto interface_err; } @@ -520,7 +524,7 @@ static int soc_pcm_hw_params(struct snd_pcm_substream *substream, if (platform->pcm_ops->hw_params) { ret = platform->pcm_ops->hw_params(substream, params); if (ret < 0) { - printk(KERN_ERR "asoc: can't set platform %s hw params\n", + printk(KERN_ERR "asoc: platform %s hw params failed\n", platform->name); goto platform_err; } @@ -539,7 +543,7 @@ interface_err: codec_dai->ops.hw_free(substream); codec_err: - if(machine->ops && machine->ops->hw_free) + if (machine->ops && machine->ops->hw_free) machine->ops->hw_free(substream); mutex_unlock(&pcm_mutex); @@ -628,15 +632,15 @@ static struct snd_pcm_ops soc_pcm_ops = { /* powers down audio subsystem for suspend */ static int soc_suspend(struct platform_device *pdev, pm_message_t state) { - struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_machine *machine = socdev->machine; - struct snd_soc_platform *platform = socdev->platform; - struct snd_soc_codec_device *codec_dev = socdev->codec_dev; + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_machine *machine = socdev->machine; + struct snd_soc_platform *platform = socdev->platform; + struct snd_soc_codec_device *codec_dev = socdev->codec_dev; struct snd_soc_codec *codec = socdev->codec; int i; /* mute any active DAC's */ - for(i = 0; i < machine->num_links; i++) { + for (i = 0; i < machine->num_links; i++) { struct snd_soc_codec_dai *dai = machine->dai_link[i].codec_dai; if (dai->dai_ops.digital_mute && dai->playback.active) dai->dai_ops.digital_mute(dai, 1); @@ -649,7 +653,7 @@ static int soc_suspend(struct platform_device *pdev, pm_message_t state) if (machine->suspend_pre) machine->suspend_pre(pdev, state); - for(i = 0; i < machine->num_links; i++) { + for (i = 0; i < machine->num_links; i++) { struct snd_soc_cpu_dai *cpu_dai = machine->dai_link[i].cpu_dai; if (cpu_dai->suspend && cpu_dai->type != SND_SOC_DAI_AC97) cpu_dai->suspend(pdev, cpu_dai); @@ -661,7 +665,7 @@ static int soc_suspend(struct platform_device *pdev, pm_message_t state) run_delayed_work(&socdev->delayed_work); codec->suspend_bias_level = codec->bias_level; - for(i = 0; i < codec->num_dai; i++) { + for (i = 0; i < codec->num_dai; i++) { char *stream = codec->dai[i].playback.stream_name; if (stream != NULL) snd_soc_dapm_stream_event(codec, stream, @@ -675,7 +679,7 @@ static int soc_suspend(struct platform_device *pdev, pm_message_t state) if (codec_dev->suspend) codec_dev->suspend(pdev, state); - for(i = 0; i < machine->num_links; i++) { + for (i = 0; i < machine->num_links; i++) { struct snd_soc_cpu_dai *cpu_dai = machine->dai_link[i].cpu_dai; if (cpu_dai->suspend && cpu_dai->type == SND_SOC_DAI_AC97) cpu_dai->suspend(pdev, cpu_dai); @@ -690,17 +694,17 @@ static int soc_suspend(struct platform_device *pdev, pm_message_t state) /* powers up audio subsystem after a suspend */ static int soc_resume(struct platform_device *pdev) { - struct snd_soc_device *socdev = platform_get_drvdata(pdev); - struct snd_soc_machine *machine = socdev->machine; - struct snd_soc_platform *platform = socdev->platform; - struct snd_soc_codec_device *codec_dev = socdev->codec_dev; + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_machine *machine = socdev->machine; + struct snd_soc_platform *platform = socdev->platform; + struct snd_soc_codec_device *codec_dev = socdev->codec_dev; struct snd_soc_codec *codec = socdev->codec; int i; if (machine->resume_pre) machine->resume_pre(pdev); - for(i = 0; i < machine->num_links; i++) { + for (i = 0; i < machine->num_links; i++) { struct snd_soc_cpu_dai *cpu_dai = machine->dai_link[i].cpu_dai; if (cpu_dai->resume && cpu_dai->type == SND_SOC_DAI_AC97) cpu_dai->resume(pdev, cpu_dai); @@ -709,8 +713,8 @@ static int soc_resume(struct platform_device *pdev) if (codec_dev->resume) codec_dev->resume(pdev); - for(i = 0; i < codec->num_dai; i++) { - char* stream = codec->dai[i].playback.stream_name; + for (i = 0; i < codec->num_dai; i++) { + char *stream = codec->dai[i].playback.stream_name; if (stream != NULL) snd_soc_dapm_stream_event(codec, stream, SND_SOC_DAPM_STREAM_RESUME); @@ -720,14 +724,14 @@ static int soc_resume(struct platform_device *pdev) SND_SOC_DAPM_STREAM_RESUME); } - /* unmute any active DAC's */ - for(i = 0; i < machine->num_links; i++) { + /* unmute any active DACs */ + for (i = 0; i < machine->num_links; i++) { struct snd_soc_codec_dai *dai = machine->dai_link[i].codec_dai; if (dai->dai_ops.digital_mute && dai->playback.active) dai->dai_ops.digital_mute(dai, 0); } - for(i = 0; i < machine->num_links; i++) { + for (i = 0; i < machine->num_links; i++) { struct snd_soc_cpu_dai *cpu_dai = machine->dai_link[i].cpu_dai; if (cpu_dai->resume && cpu_dai->type != SND_SOC_DAI_AC97) cpu_dai->resume(pdev, cpu_dai); @@ -757,7 +761,7 @@ static int soc_probe(struct platform_device *pdev) if (machine->probe) { ret = machine->probe(pdev); - if(ret < 0) + if (ret < 0) return ret; } @@ -765,20 +769,20 @@ static int soc_probe(struct platform_device *pdev) struct snd_soc_cpu_dai *cpu_dai = machine->dai_link[i].cpu_dai; if (cpu_dai->probe) { ret = cpu_dai->probe(pdev); - if(ret < 0) + if (ret < 0) goto cpu_dai_err; } } if (codec_dev->probe) { ret = codec_dev->probe(pdev); - if(ret < 0) + if (ret < 0) goto cpu_dai_err; } if (platform->probe) { ret = platform->probe(pdev); - if(ret < 0) + if (ret < 0) goto platform_err; } @@ -865,7 +869,7 @@ static int soc_new_pcm(struct snd_soc_device *socdev, codec_dai->codec = socdev->codec; /* check client and interface hw capabilities */ - sprintf(new_name, "%s %s-%s-%d",dai_link->stream_name, codec_dai->name, + sprintf(new_name, "%s %s-%s-%d", dai_link->stream_name, codec_dai->name, get_dai_name(cpu_dai->type), num); if (codec_dai->playback.channels_min) @@ -876,7 +880,8 @@ static int soc_new_pcm(struct snd_soc_device *socdev, ret = snd_pcm_new(codec->card, new_name, codec->pcm_devs++, playback, capture, &pcm); if (ret < 0) { - printk(KERN_ERR "asoc: can't create pcm for codec %s\n", codec->name); + printk(KERN_ERR "asoc: can't create pcm for codec %s\n", + codec->name); kfree(rtd); return ret; } @@ -925,8 +930,9 @@ static ssize_t codec_reg_show(struct device *dev, step = codec->reg_cache_step; count += sprintf(buf, "%s registers\n", codec->name); - for(i = 0; i < codec->reg_cache_size; i += step) - count += sprintf(buf + count, "%2x: %4x\n", i, codec->read(codec, i)); + for (i = 0; i < codec->reg_cache_size; i += step) + count += sprintf(buf + count, "%2x: %4x\n", i, + codec->read(codec, i)); return count; } @@ -1069,7 +1075,7 @@ int snd_soc_new_pcms(struct snd_soc_device *socdev, int idx, const char *xid) strncpy(codec->card->driver, codec->name, sizeof(codec->card->driver)); /* create the pcms */ - for(i = 0; i < machine->num_links; i++) { + for (i = 0; i < machine->num_links; i++) { ret = soc_new_pcm(socdev, &machine->dai_link[i], i); if (ret < 0) { printk(KERN_ERR "asoc: can't create pcm %s\n", @@ -1099,7 +1105,7 @@ int snd_soc_register_card(struct snd_soc_device *socdev) struct snd_soc_machine *machine = socdev->machine; int ret = 0, i, ac97 = 0, err = 0; - for(i = 0; i < machine->num_links; i++) { + for (i = 0; i < machine->num_links; i++) { if (socdev->machine->dai_link[i].init) { err = socdev->machine->dai_link[i].init(codec); if (err < 0) { @@ -1108,7 +1114,7 @@ int snd_soc_register_card(struct snd_soc_device *socdev) continue; } } - if (socdev->machine->dai_link[i].codec_dai->type == + if (socdev->machine->dai_link[i].codec_dai->type == SND_SOC_DAI_AC97_BUS) ac97 = 1; } @@ -1119,7 +1125,7 @@ int snd_soc_register_card(struct snd_soc_device *socdev) ret = snd_card_register(codec->card); if (ret < 0) { - printk(KERN_ERR "asoc: failed to register soundcard for codec %s\n", + printk(KERN_ERR "asoc: failed to register soundcard for %s\n", codec->name); goto out; } @@ -1143,7 +1149,7 @@ int snd_soc_register_card(struct snd_soc_device *socdev) err = device_create_file(socdev->dev, &dev_attr_codec_reg); if (err < 0) - printk(KERN_WARNING "asoc: failed to add codec sysfs entries\n"); + printk(KERN_WARNING "asoc: failed to add codec sysfs files\n"); mutex_unlock(&codec->mutex); @@ -1169,7 +1175,7 @@ void snd_soc_free_pcms(struct snd_soc_device *socdev) mutex_lock(&codec->mutex); #ifdef CONFIG_SND_SOC_AC97_BUS - for(i = 0; i < codec->num_dai; i++) { + for (i = 0; i < codec->num_dai; i++) { codec_dai = &codec->dai[i]; if (codec_dai->type == SND_SOC_DAI_AC97_BUS && codec->ac97) { soc_ac97_dev_unregister(codec); @@ -1279,7 +1285,8 @@ int snd_soc_get_enum_double(struct snd_kcontrol *kcontrol, for (bitmask = 1; bitmask < e->mask; bitmask <<= 1) ; val = snd_soc_read(codec, e->reg); - ucontrol->value.enumerated.item[0] = (val >> e->shift_l) & (bitmask - 1); + ucontrol->value.enumerated.item[0] + = (val >> e->shift_l) & (bitmask - 1); if (e->shift_l != e->shift_r) ucontrol->value.enumerated.item[1] = (val >> e->shift_r) & (bitmask - 1); @@ -1573,7 +1580,8 @@ int snd_soc_put_volsw_2r(struct snd_kcontrol *kcontrol, val = val << shift; val2 = val2 << shift; - if ((err = snd_soc_update_bits(codec, reg, val_mask, val)) < 0) + err = snd_soc_update_bits(codec, reg, val_mask, val); + if (err < 0) return err; err = snd_soc_update_bits(codec, reg2, val_mask, val2); @@ -1589,7 +1597,7 @@ static int __devinit snd_soc_init(void) static void snd_soc_exit(void) { - platform_driver_unregister(&soc_driver); + platform_driver_unregister(&soc_driver); } module_init(snd_soc_init); -- cgit v1.2.3 From a65f0568f6cc8433877fb71dd7d36b551854b0bc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 13 May 2008 14:54:43 +0200 Subject: [ALSA] soc - Convert Wolfson codec drivers to use bulk DAPM registration Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/codecs/wm8731.c | 16 ++++------------ sound/soc/codecs/wm8750.c | 16 ++++------------ sound/soc/codecs/wm8753.c | 17 ++++------------- sound/soc/codecs/wm9712.c | 15 ++++----------- sound/soc/codecs/wm9713.c | 15 ++++----------- 5 files changed, 20 insertions(+), 59 deletions(-) diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 0f28aa4bcccb..5acf43ab104e 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -193,7 +193,7 @@ SND_SOC_DAPM_INPUT("RLINEIN"), SND_SOC_DAPM_INPUT("LLINEIN"), }; -static const char *intercon[][3] = { +static const struct snd_soc_dapm_route intercon[] = { /* output mixer */ {"Output Mixer", "Line Bypass Switch", "Line Input"}, {"Output Mixer", "HiFi Playback Switch", "DAC"}, @@ -214,22 +214,14 @@ static const char *intercon[][3] = { {"Line Input", NULL, "LLINEIN"}, {"Line Input", NULL, "RLINEIN"}, {"Mic Bias", NULL, "MICIN"}, - - /* terminator */ - {NULL, NULL, NULL}, }; static int wm8731_add_widgets(struct snd_soc_codec *codec) { - int i; - - for (i = 0; i < ARRAY_SIZE(wm8731_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &wm8731_dapm_widgets[i]); + snd_soc_dapm_new_controls(codec, wm8731_dapm_widgets, + ARRAY_SIZE(wm8731_dapm_widgets)); - /* set up audio path interconnects */ - for (i = 0; intercon[i][0] != NULL; i++) - snd_soc_dapm_connect_input(codec, intercon[i][0], - intercon[i][1], intercon[i][2]); + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); snd_soc_dapm_new_widgets(codec); return 0; diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c index 62423f4493b0..1f11ad24551a 100644 --- a/sound/soc/codecs/wm8750.c +++ b/sound/soc/codecs/wm8750.c @@ -378,7 +378,7 @@ static const struct snd_soc_dapm_widget wm8750_dapm_widgets[] = { SND_SOC_DAPM_INPUT("RINPUT3"), }; -static const char *audio_map[][3] = { +static const struct snd_soc_dapm_route audio_map[] = { /* left mixer */ {"Left Mixer", "Playback Switch", "Left DAC"}, {"Left Mixer", "Left Bypass Switch", "Left Line Mux"}, @@ -470,22 +470,14 @@ static const char *audio_map[][3] = { /* ADC */ {"Left ADC", NULL, "Left ADC Mux"}, {"Right ADC", NULL, "Right ADC Mux"}, - - /* terminator */ - {NULL, NULL, NULL}, }; static int wm8750_add_widgets(struct snd_soc_codec *codec) { - int i; - - for (i = 0; i < ARRAY_SIZE(wm8750_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &wm8750_dapm_widgets[i]); + snd_soc_dapm_new_controls(codec, wm8750_dapm_widgets, + ARRAY_SIZE(wm8750_dapm_widgets)); - /* set up audio path audio_mapnects */ - for (i = 0; audio_map[i][0] != NULL; i++) - snd_soc_dapm_connect_input(codec, audio_map[i][0], - audio_map[i][1], audio_map[i][2]); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); snd_soc_dapm_new_widgets(codec); return 0; diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c index 9032b0c07c86..c32e6326be6c 100644 --- a/sound/soc/codecs/wm8753.c +++ b/sound/soc/codecs/wm8753.c @@ -523,7 +523,7 @@ SND_SOC_DAPM_INPUT("MIC2"), SND_SOC_DAPM_VMID("VREF"), }; -static const char *audio_map[][3] = { +static const struct snd_soc_dapm_route audio_map[] = { /* left mixer */ {"Left Mixer", "Left Playback Switch", "Left DAC"}, {"Left Mixer", "Voice Playback Switch", "Voice DAC"}, @@ -674,23 +674,14 @@ static const char *audio_map[][3] = { /* ACOP */ {"ACOP", NULL, "ALC Mixer"}, - - /* terminator */ - {NULL, NULL, NULL}, }; static int wm8753_add_widgets(struct snd_soc_codec *codec) { - int i; + snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets, + ARRAY_SIZE(wm8753_dapm_widgets)); - for (i = 0; i < ARRAY_SIZE(wm8753_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &wm8753_dapm_widgets[i]); - - /* set up the WM8753 audio map */ - for (i = 0; audio_map[i][0] != NULL; i++) { - snd_soc_dapm_connect_input(codec, audio_map[i][0], - audio_map[i][1], audio_map[i][2]); - } + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); snd_soc_dapm_new_widgets(codec); return 0; diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index e26cfcf0b4fc..d9789f1c8903 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -348,7 +348,7 @@ SND_SOC_DAPM_INPUT("MIC1"), SND_SOC_DAPM_INPUT("MIC2"), }; -static const char *audio_map[][3] = { +static const struct snd_soc_dapm_route audio_map[] = { /* virtual mixer - mixes left & right channels for spk and mono */ {"AC97 Mixer", NULL, "Left DAC"}, {"AC97 Mixer", NULL, "Right DAC"}, @@ -443,21 +443,14 @@ static const char *audio_map[][3] = { {"Speaker PGA", NULL, "Speaker Mux"}, {"LOUT2", NULL, "Speaker PGA"}, {"ROUT2", NULL, "Speaker PGA"}, - - {NULL, NULL, NULL}, }; static int wm9712_add_widgets(struct snd_soc_codec *codec) { - int i; - - for (i = 0; i < ARRAY_SIZE(wm9712_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &wm9712_dapm_widgets[i]); + snd_soc_dapm_new_controls(codec, wm9712_dapm_widgets, + ARRAY_SIZE(wm9712_dapm_widgets)); - /* set up audio path connects */ - for (i = 0; audio_map[i][0] != NULL; i++) - snd_soc_dapm_connect_input(codec, audio_map[i][0], - audio_map[i][1], audio_map[i][2]); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); snd_soc_dapm_new_widgets(codec); return 0; diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index 4863636e9d56..4f516a5a5616 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -453,7 +453,7 @@ SND_SOC_DAPM_INPUT("MIC2B"), SND_SOC_DAPM_VMID("VMID"), }; -static const char *audio_map[][3] = { +static const struct snd_soc_dapm_route audio_map[] = { /* left HP mixer */ {"Left HP Mixer", "PC Beep Playback Switch", "PCBEEP"}, {"Left HP Mixer", "Voice Playback Switch", "Voice DAC"}, @@ -604,21 +604,14 @@ static const char *audio_map[][3] = { {"Capture Mono Mux", "Stereo", "Capture Mixer"}, {"Capture Mono Mux", "Left", "Left Capture Source"}, {"Capture Mono Mux", "Right", "Right Capture Source"}, - - {NULL, NULL, NULL}, }; static int wm9713_add_widgets(struct snd_soc_codec *codec) { - int i; - - for (i = 0; i < ARRAY_SIZE(wm9713_dapm_widgets); i++) - snd_soc_dapm_new_control(codec, &wm9713_dapm_widgets[i]); + snd_soc_dapm_new_controls(codec, wm9713_dapm_widgets, + ARRAY_SIZE(wm9713_dapm_widgets)); - /* set up audio path audio_mapnects */ - for (i = 0; audio_map[i][0] != NULL; i++) - snd_soc_dapm_connect_input(codec, audio_map[i][0], - audio_map[i][1], audio_map[i][2]); + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); snd_soc_dapm_new_widgets(codec); return 0; -- cgit v1.2.3 From 33e5b22285f63ede858c00456f3ffbc2ea79d6cf Mon Sep 17 00:00:00 2001 From: Werner Almesberger Date: Mon, 14 Apr 2008 14:26:44 +0200 Subject: [ALSA] soc - Fix s3c24xx-i2s LR sync while timer ticks are disabled When timer ticks are disabled when calling sound/soc/s3c24xx/s3c24xx-i2s.c:s3c24xx_snd_lrsync and the LR signal never happens, we loop forever. This has been observed in the following call chain: snd_pcm_common_ioctl1 -> snd_pcm_action_lock_irq -> snd_pcm_action_single -> snd_pcm_do_resume -> soc_pcm_trigger -> s3c24xx_i2s_trigger The patch below changes the timeout mechanism to use udelay, which doesn't need timer ticks. Signed-off-by: Werner Almesberger Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- sound/soc/s3c24xx/s3c24xx-i2s.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/s3c24xx/s3c24xx-i2s.c b/sound/soc/s3c24xx/s3c24xx-i2s.c index ddf87246c77b..4c52f7946d9e 100644 --- a/sound/soc/s3c24xx/s3c24xx-i2s.c +++ b/sound/soc/s3c24xx/s3c24xx-i2s.c @@ -175,7 +175,7 @@ static void s3c24xx_snd_rxctrl(int on) static int s3c24xx_snd_lrsync(void) { u32 iiscon; - unsigned long timeout = jiffies + msecs_to_jiffies(5); + int timeout = 50; /* 5ms */ DBG("Entered %s\n", __func__); @@ -184,8 +184,9 @@ static int s3c24xx_snd_lrsync(void) if (iiscon & S3C2410_IISCON_LRINDEX) break; - if (time_after(jiffies, timeout)) + if (!timeout--) return -ETIMEDOUT; + udelay(100); } return 0; -- cgit v1.2.3 From b9ada4281c48076bdb252813be24ddb57e17cade Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 20 May 2008 11:01:08 +0100 Subject: x86: reinstate numa remap for SPARSEMEM on x86 NUMA systems Recent kernels have been panic'ing trying to allocate memory early in boot, in __alloc_pages: BUG: unable to handle kernel paging request at 00001568 IP: [] __alloc_pages+0x33/0x2cc *pdpt = 00000000013a5001 *pde = 0000000000000000 Oops: 0000 [#1] SMP Modules linked in: Pid: 1, comm: swapper Not tainted (2.6.25 #78) EIP: 0060:[] EFLAGS: 00010246 CPU: 0 EIP is at __alloc_pages+0x33/0x2cc EAX: 00001564 EBX: 000412d0 ECX: 00001564 EDX: 000005c3 ESI: f78012a0 EDI: 00000001 EBP: 00001564 ESP: f7871e50 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=f7870000 task=f786f670 task.ti=f7870000) Stack: 00000000 f786f670 00000010 00000000 0000b700 000412d0 f78012a0 00000001 00000000 c105b64d 00000000 000412d0 f78012a0 f7803120 00000000 c105c1c5 00000010 f7803144 000412d0 00000001 f7803130 f7803120 f78012a0 00000001 Call Trace: [] kmem_getpages+0x94/0x129 [] cache_grow+0x8f/0x123 [] ____cache_alloc_node+0xb9/0xe4 [] kmem_cache_alloc_node+0x92/0xd2 [] build_sched_domains+0x536/0x70d [] do_flush_tlb_all+0x0/0x3f [] do_flush_tlb_all+0x0/0x3f [] interleave_nodes+0x23/0x5a [] alternate_node_alloc+0x43/0x5b [] arch_init_sched_domains+0x46/0x51 [] kernel_init+0x0/0x82 [] sched_init_smp+0x10/0xbb [] kernel_init+0x43/0x82 [] kernel_thread_helper+0x7/0x10 Debugging this showed that the NODE_DATA() for nodes other than node 0 were all NULL. Tracing this back showed that the NODE_DATA() pointers were being initialised to each nodes remap space. However under SPARSEMEM remap is disabled which leads to the pgdat's being placed incorrectly at kernel virtual address 0. Leading to the panic when attempting to allocate memory from these nodes. Numa remap was disabled in the commit below. This occured while fixing problems triggered when attempting to boot x86_32 NUMA SPARSEMEM kernels on non-numa hardware. x86: make NUMA work on 32-bit commit 1b000a5dbeb2f34bc03d45ebdf3f6d24a60c3aed The real problem is believed to be related to other alignment issues in the regions blocked out from the bootmem allocator for small memory systems, and has been fixed separately. Therefore re-enable remap for SPARSMEM, which fixes pgdat allocation issues. Testing confirms that SPARSMEM NUMA kernels will boot correctly with this part of the change reverted. Signed-off-by: Andy Whitcroft Acked-by: Mel Gorman Signed-off-by: Ingo Molnar --- arch/x86/mm/discontig_32.c | 34 ++++++---------------------------- 1 file changed, 6 insertions(+), 28 deletions(-) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 914ccf983687..026201f143a8 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -164,16 +164,13 @@ static void __init allocate_pgdat(int nid) } } -#ifdef CONFIG_DISCONTIGMEM /* - * In the discontig memory model, a portion of the kernel virtual area (KVA) - * is reserved and portions of nodes are mapped using it. This is to allow - * node-local memory to be allocated for structures that would normally require - * ZONE_NORMAL. The memory is allocated with alloc_remap() and callers - * should be prepared to allocate from the bootmem allocator instead. This KVA - * mechanism is incompatible with SPARSEMEM as it makes assumptions about the - * layout of memory that are broken if alloc_remap() succeeds for some of the - * map and fails for others + * In the DISCONTIGMEM and SPARSEMEM memory model, a portion of the kernel + * virtual address space (KVA) is reserved and portions of nodes are mapped + * using it. This is to allow node-local memory to be allocated for + * structures that would normally require ZONE_NORMAL. The memory is + * allocated with alloc_remap() and callers should be prepared to allocate + * from the bootmem allocator instead. */ static unsigned long node_remap_start_pfn[MAX_NUMNODES]; static void *node_remap_end_vaddr[MAX_NUMNODES]; @@ -290,25 +287,6 @@ static void init_remap_allocator(int nid) (ulong) pfn_to_kaddr(highstart_pfn + node_remap_offset[nid] + node_remap_size[nid])); } -#else -void *alloc_remap(int nid, unsigned long size) -{ - return NULL; -} - -static unsigned long calculate_numa_remap_pages(void) -{ - return 0; -} - -static void init_remap_allocator(int nid) -{ -} - -void __init remap_numa_kva(void) -{ -} -#endif /* CONFIG_DISCONTIGMEM */ extern void setup_bootmem_allocator(void); unsigned long __init setup_memory(void) -- cgit v1.2.3 From 84d6bd0e272e6eace1e7e4c501f32bddfb665bb2 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Tue, 20 May 2008 11:01:19 +0100 Subject: x86: cope with no remap space being allocated for a numa node When allocating the pgdat's for numa nodes on x86_32 we attempt to place them in the numa remap space for that node. However should the node not have any remap space allocated (such as due to having non-ram pages in the remap location in the node) then we will incorrectly place the pgdat at zero. Check we have remap available, falling back to node 0 memory where we do not. Signed-off-by: Andy Whitcroft Acked-by: Mel Gorman Signed-off-by: Ingo Molnar --- arch/x86/mm/discontig_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 026201f143a8..435c343c14bc 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -156,7 +156,7 @@ static void __init propagate_e820_map_node(int nid) */ static void __init allocate_pgdat(int nid) { - if (nid && node_has_online_mem(nid)) + if (nid && node_has_online_mem(nid) && node_remap_start_vaddr[nid]) NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid]; else { NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(min_low_pfn)); -- cgit v1.2.3 From aea3bfbcfb0453217c8da6cfdc1b2394d214bee5 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Tue, 20 May 2008 14:22:44 +0200 Subject: [ALSA] ice1724: fix MIDI The VT1724 MIDI port is not MPU-401 compatible; remove the hacks that try to make the MPU-401 library work with it, and just use some simple device-specific code. Signed-off-by: Clemens Ladisch Tested-by: Pavel Hofman --- sound/pci/Kconfig | 2 +- sound/pci/ice1712/envy24ht.h | 10 +- sound/pci/ice1712/ice1712.h | 2 + sound/pci/ice1712/ice1724.c | 213 +++++++++++++++++++++++++++++++++---------- 4 files changed, 177 insertions(+), 50 deletions(-) diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 7e4742109572..d95fbb2b5b9f 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -692,7 +692,7 @@ config SND_ICE1712 config SND_ICE1724 tristate "ICE/VT1724/1720 (Envy24HT/PT)" depends on SND - select SND_MPU401_UART + select SND_RAWMIDI select SND_AC97_CODEC select SND_VMASTER help diff --git a/sound/pci/ice1712/envy24ht.h b/sound/pci/ice1712/envy24ht.h index 43b9e3e858be..a0c5e009bb4a 100644 --- a/sound/pci/ice1712/envy24ht.h +++ b/sound/pci/ice1712/envy24ht.h @@ -93,9 +93,13 @@ enum { #define VT1724_REG_MPU_TXFIFO 0x0a /*byte ro. number of bytes in TX fifo*/ #define VT1724_REG_MPU_RXFIFO 0x0b /*byte ro. number of bytes in RX fifo*/ -//are these 2 the wrong way around? they don't seem to be used yet anyway -#define VT1724_REG_MPU_CTRL 0x0c /* byte */ -#define VT1724_REG_MPU_DATA 0x0d /* byte */ +#define VT1724_REG_MPU_DATA 0x0c /* byte */ +#define VT1724_REG_MPU_CTRL 0x0d /* byte */ +#define VT1724_MPU_UART 0x01 +#define VT1724_MPU_TX_EMPTY 0x02 +#define VT1724_MPU_TX_FULL 0x04 +#define VT1724_MPU_RX_EMPTY 0x08 +#define VT1724_MPU_RX_FULL 0x10 #define VT1724_REG_MPU_FIFO_WM 0x0e /*byte set the high/low watermarks for RX/TX fifos*/ #define VT1724_MPU_RX_FIFO 0x20 //1=rx fifo watermark 0=tx fifo watermark diff --git a/sound/pci/ice1712/ice1712.h b/sound/pci/ice1712/ice1712.h index 3208901c740e..762fbd7a7507 100644 --- a/sound/pci/ice1712/ice1712.h +++ b/sound/pci/ice1712/ice1712.h @@ -333,6 +333,8 @@ struct snd_ice1712 { unsigned int has_spdif: 1; /* VT1720/4 - has SPDIF I/O */ unsigned int force_pdma4: 1; /* VT1720/4 - PDMA4 as non-spdif */ unsigned int force_rdma1: 1; /* VT1720/4 - RDMA1 as non-spdif */ + unsigned int midi_output: 1; /* VT1720/4: MIDI output triggered */ + unsigned int midi_input: 1; /* VT1720/4: MIDI input triggered */ unsigned int num_total_dacs; /* total DACs */ unsigned int num_total_adcs; /* total ADCs */ unsigned int cur_rate; /* current rate */ diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c index 67350901772c..e596d777d9dd 100644 --- a/sound/pci/ice1712/ice1724.c +++ b/sound/pci/ice1712/ice1724.c @@ -32,7 +32,7 @@ #include #include #include -#include +#include #include #include @@ -223,30 +223,153 @@ static unsigned int snd_vt1724_get_gpio_data(struct snd_ice1712 *ice) } /* - * MPU401 accessor + * MIDI */ -static unsigned char snd_vt1724_mpu401_read(struct snd_mpu401 *mpu, - unsigned long addr) + +static void vt1724_midi_clear_rx(struct snd_ice1712 *ice) +{ + unsigned int count; + + for (count = inb(ICEREG1724(ice, MPU_RXFIFO)); count > 0; --count) + inb(ICEREG1724(ice, MPU_DATA)); +} + +static inline struct snd_rawmidi_substream * +get_rawmidi_substream(struct snd_ice1712 *ice, unsigned int stream) { - /* fix status bits to the standard position */ - /* only RX_EMPTY and TX_FULL are checked */ - if (addr == MPU401C(mpu)) - return (inb(addr) & 0x0c) << 4; + return list_first_entry(&ice->rmidi[0]->streams[stream].substreams, + struct snd_rawmidi_substream, list); +} + +static void vt1724_midi_write(struct snd_ice1712 *ice) +{ + struct snd_rawmidi_substream *s; + int count, i; + u8 buffer[32]; + + s = get_rawmidi_substream(ice, SNDRV_RAWMIDI_STREAM_OUTPUT); + count = 31 - inb(ICEREG1724(ice, MPU_TXFIFO)); + if (count > 0) { + count = snd_rawmidi_transmit(s, buffer, count); + for (i = 0; i < count; ++i) + outb(buffer[i], ICEREG1724(ice, MPU_DATA)); + } +} + +static void vt1724_midi_read(struct snd_ice1712 *ice) +{ + struct snd_rawmidi_substream *s; + int count, i; + u8 buffer[32]; + + s = get_rawmidi_substream(ice, SNDRV_RAWMIDI_STREAM_INPUT); + count = inb(ICEREG1724(ice, MPU_RXFIFO)); + if (count > 0) { + count = min(count, 32); + for (i = 0; i < count; ++i) + buffer[i] = inb(ICEREG1724(ice, MPU_DATA)); + snd_rawmidi_receive(s, buffer, count); + } +} + +static void vt1724_enable_midi_irq(struct snd_rawmidi_substream *substream, + u8 flag, int enable) +{ + struct snd_ice1712 *ice = substream->rmidi->private_data; + u8 mask; + + spin_lock_irq(&ice->reg_lock); + mask = inb(ICEREG1724(ice, IRQMASK)); + if (enable) + mask &= ~flag; else - return inb(addr); + mask |= flag; + outb(mask, ICEREG1724(ice, IRQMASK)); + spin_unlock_irq(&ice->reg_lock); } -static void snd_vt1724_mpu401_write(struct snd_mpu401 *mpu, - unsigned char data, unsigned long addr) +static int vt1724_midi_output_open(struct snd_rawmidi_substream *s) { - if (addr == MPU401C(mpu)) { - if (data == MPU401_ENTER_UART) - outb(0x01, addr); - /* what else? */ - } else - outb(data, addr); + vt1724_enable_midi_irq(s, VT1724_IRQ_MPU_TX, 1); + return 0; +} + +static int vt1724_midi_output_close(struct snd_rawmidi_substream *s) +{ + vt1724_enable_midi_irq(s, VT1724_IRQ_MPU_TX, 0); + return 0; } +static void vt1724_midi_output_trigger(struct snd_rawmidi_substream *s, int up) +{ + struct snd_ice1712 *ice = s->rmidi->private_data; + unsigned long flags; + + spin_lock_irqsave(&ice->reg_lock, flags); + if (up) { + ice->midi_output = 1; + vt1724_midi_write(ice); + } else { + ice->midi_output = 0; + } + spin_unlock_irqrestore(&ice->reg_lock, flags); +} + +static void vt1724_midi_output_drain(struct snd_rawmidi_substream *s) +{ + struct snd_ice1712 *ice = s->rmidi->private_data; + unsigned long timeout; + + /* 32 bytes should be transmitted in less than about 12 ms */ + timeout = jiffies + msecs_to_jiffies(15); + do { + if (inb(ICEREG1724(ice, MPU_CTRL)) & VT1724_MPU_TX_EMPTY) + break; + schedule_timeout_uninterruptible(1); + } while (time_after(timeout, jiffies)); +} + +static struct snd_rawmidi_ops vt1724_midi_output_ops = { + .open = vt1724_midi_output_open, + .close = vt1724_midi_output_close, + .trigger = vt1724_midi_output_trigger, + .drain = vt1724_midi_output_drain, +}; + +static int vt1724_midi_input_open(struct snd_rawmidi_substream *s) +{ + vt1724_midi_clear_rx(s->rmidi->private_data); + vt1724_enable_midi_irq(s, VT1724_IRQ_MPU_RX, 1); + return 0; +} + +static int vt1724_midi_input_close(struct snd_rawmidi_substream *s) +{ + vt1724_enable_midi_irq(s, VT1724_IRQ_MPU_RX, 0); + return 0; +} + +static void vt1724_midi_input_trigger(struct snd_rawmidi_substream *s, int up) +{ + struct snd_ice1712 *ice = s->rmidi->private_data; + unsigned long flags; + + spin_lock_irqsave(&ice->reg_lock, flags); + if (up) { + ice->midi_input = 1; + vt1724_midi_read(ice); + } else { + ice->midi_input = 0; + } + spin_unlock_irqrestore(&ice->reg_lock, flags); +} + +static struct snd_rawmidi_ops vt1724_midi_input_ops = { + .open = vt1724_midi_input_open, + .close = vt1724_midi_input_close, + .trigger = vt1724_midi_input_trigger, +}; + /* * Interrupt handler @@ -278,13 +401,10 @@ static irqreturn_t snd_vt1724_interrupt(int irq, void *dev_id) #endif handled = 1; if (status & VT1724_IRQ_MPU_TX) { - if (ice->rmidi[0]) - snd_mpu401_uart_interrupt_tx(irq, - ice->rmidi[0]->private_data); - else /* disable TX to be sure */ - outb(inb(ICEREG1724(ice, IRQMASK)) | - VT1724_IRQ_MPU_TX, - ICEREG1724(ice, IRQMASK)); + spin_lock(&ice->reg_lock); + if (ice->midi_output) + vt1724_midi_write(ice); + spin_unlock(&ice->reg_lock); /* Due to mysterical reasons, MPU_TX is always * generated (and can't be cleared) when a PCM * playback is going. So let's ignore at the @@ -293,13 +413,12 @@ static irqreturn_t snd_vt1724_interrupt(int irq, void *dev_id) status_mask &= ~VT1724_IRQ_MPU_TX; } if (status & VT1724_IRQ_MPU_RX) { - if (ice->rmidi[0]) - snd_mpu401_uart_interrupt(irq, - ice->rmidi[0]->private_data); - else /* disable RX to be sure */ - outb(inb(ICEREG1724(ice, IRQMASK)) | - VT1724_IRQ_MPU_RX, - ICEREG1724(ice, IRQMASK)); + spin_lock(&ice->reg_lock); + if (ice->midi_input) + vt1724_midi_read(ice); + else + vt1724_midi_clear_rx(ice); + spin_unlock(&ice->reg_lock); } /* ack MPU irq */ outb(status, ICEREG1724(ice, IRQSTAT)); @@ -2425,28 +2544,30 @@ static int __devinit snd_vt1724_probe(struct pci_dev *pci, if (! c->no_mpu401) { if (ice->eeprom.data[ICE_EEP2_SYSCONF] & VT1724_CFG_MPU401) { - struct snd_mpu401 *mpu; - if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_ICE1712, - ICEREG1724(ice, MPU_CTRL), - (MPU401_INFO_INTEGRATED | - MPU401_INFO_NO_ACK | - MPU401_INFO_TX_IRQ), - ice->irq, 0, - &ice->rmidi[0])) < 0) { + struct snd_rawmidi *rmidi; + + err = snd_rawmidi_new(card, "MIDI", 0, 1, 1, &rmidi); + if (err < 0) { snd_card_free(card); return err; } - mpu = ice->rmidi[0]->private_data; - mpu->read = snd_vt1724_mpu401_read; - mpu->write = snd_vt1724_mpu401_write; - /* unmask MPU RX/TX irqs */ - outb(inb(ICEREG1724(ice, IRQMASK)) & - ~(VT1724_IRQ_MPU_RX | VT1724_IRQ_MPU_TX), - ICEREG1724(ice, IRQMASK)); + ice->rmidi[0] = rmidi; + rmidi->private_data = ice; + strcpy(rmidi->name, "ICE1724 MIDI"); + rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT | + SNDRV_RAWMIDI_INFO_INPUT | + SNDRV_RAWMIDI_INFO_DUPLEX; + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT, + &vt1724_midi_output_ops); + snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT, + &vt1724_midi_input_ops); + /* set watermarks */ outb(VT1724_MPU_RX_FIFO | 0x1, ICEREG1724(ice, MPU_FIFO_WM)); outb(0x1, ICEREG1724(ice, MPU_FIFO_WM)); + /* set UART mode */ + outb(VT1724_MPU_UART, ICEREG1724(ice, MPU_CTRL)); } } -- cgit v1.2.3 From 6536d2891ba2c4e837ba8478dc13bb173ed24a23 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Wed, 21 May 2008 10:45:16 -0500 Subject: JFS: skip bad iput() call in error path If jfs_iget() fails, we can't call iput() on the returned error. Thanks to Eric Sesterhenn's fuzzer testing for reporting the problem. Signed-off-by: Dave Kleikamp --- fs/jfs/super.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/jfs/super.c b/fs/jfs/super.c index 50ea65451732..0288e6d7936a 100644 --- a/fs/jfs/super.c +++ b/fs/jfs/super.c @@ -499,7 +499,7 @@ static int jfs_fill_super(struct super_block *sb, void *data, int silent) inode = jfs_iget(sb, ROOT_I); if (IS_ERR(inode)) { ret = PTR_ERR(inode); - goto out_no_root; + goto out_no_rw; } sb->s_root = d_alloc_root(inode); if (!sb->s_root) @@ -521,9 +521,8 @@ static int jfs_fill_super(struct super_block *sb, void *data, int silent) return 0; out_no_root: - jfs_err("jfs_read_super: get root inode failed"); - if (inode) - iput(inode); + jfs_err("jfs_read_super: get root dentry failed"); + iput(inode); out_no_rw: rc = jfs_umount(sb); -- cgit v1.2.3 From 2ba4cc319ab26c56205d4f23724c4748a553c845 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 13 May 2008 15:37:05 +0200 Subject: rcu: fix nf_conntrack_helper.c build bug Signed-off-by: Ingo Molnar --- net/netfilter/nf_conntrack_helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index 7d1b11703741..8e0b4c8f62a8 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From 0abbc78a0137fee60ef092f0b20a3d3d7e7e0cc2 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 20 May 2008 16:27:17 +0200 Subject: x86, aperture_64: use symbolic constants Factor-out common aperture_valid code. Signed-off-by: Pavel Machek Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 23 +---------------------- drivers/char/agp/amd64-agp.c | 22 ++++------------------ include/asm-x86/gart.h | 24 ++++++++++++++++++++++++ 3 files changed, 29 insertions(+), 40 deletions(-) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 02f4dbaa4df4..5373f7834d8a 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -109,27 +109,6 @@ static u32 __init allocate_aperture(void) return (u32)__pa(p); } -static int __init aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) -{ - if (!aper_base) - return 0; - - if (aper_base + aper_size > 0x100000000UL) { - printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n"); - return 0; - } - if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { - printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n"); - return 0; - } - if (aper_size < min_size) { - printk(KERN_ERR "Aperture too small (%d MB) than (%d MB)\n", - aper_size>>20, min_size>>20); - return 0; - } - - return 1; -} /* Find a PCI capability */ static __u32 __init find_cap(int bus, int slot, int func, int cap) @@ -344,7 +323,7 @@ out: if (gart_fix_e820 && !fix && aper_enabled) { if (!e820_all_mapped(aper_base, aper_base + aper_size, E820_RESERVED)) { - /* reserved it, so we can resuse it in second kernel */ + /* reserve it, so we can reuse it in second kernel */ printk(KERN_INFO "update e820 for GART\n"); add_memory_region(aper_base, aper_size, E820_RESERVED); update_e820(); diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index e3c7ea07f57c..f5af65ac8c78 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -228,24 +228,10 @@ static const struct agp_bridge_driver amd_8151_driver = { }; /* Some basic sanity checks for the aperture. */ -static int __devinit aperture_valid(u64 aper, u32 size) +static int __devinit agp_aperture_valid(u64 aper, u32 size) { - if (aper == 0) { - printk(KERN_ERR PFX "No aperture\n"); + if (!aperture_valid(aper, size, 32*1024*1024)) return 0; - } - if ((u64)aper + size > 0x100000000ULL) { - printk(KERN_ERR PFX "Aperture out of bounds\n"); - return 0; - } - if (e820_any_mapped(aper, aper + size, E820_RAM)) { - printk(KERN_ERR PFX "Aperture pointing to RAM\n"); - return 0; - } - if (size < 32*1024*1024) { - printk(KERN_ERR PFX "Aperture too small (%d MB)\n", size>>20); - return 0; - } /* Request the Aperture. This catches cases when someone else already put a mapping in there - happens with some very broken BIOS @@ -282,7 +268,7 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, nb_order = (nb_order >> 1) & 7; pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base); nb_aper = nb_base << 25; - if (aperture_valid(nb_aper, (32*1024*1024)< + extern void pci_iommu_shutdown(void); extern void no_iommu_init(void); extern int force_iommu, no_iommu; @@ -69,4 +71,26 @@ static inline void enable_gart_translation(struct pci_dev *dev, u64 addr) pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl); } +static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size) +{ + if (!aper_base) + return 0; + + if (aper_base + aper_size > 0x100000000ULL) { + printk(KERN_ERR "Aperture beyond 4GB. Ignoring.\n"); + return 0; + } + if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { + printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n"); + return 0; + } + if (aper_size < min_size) { + printk(KERN_ERR "Aperture too small (%d MB) than (%d MB)\n", + aper_size>>20, min_size>>20); + return 0; + } + + return 1; +} + #endif -- cgit v1.2.3 From f70c5253b41444fd2779e1f76bfe25811d9b8c23 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 12:22:36 +0100 Subject: [RTC] remove references to asm/mach/time.h asm/mach/time.h is the ARM header file for setting up kernel ticker timekeeping (be that the old jiffy interrupt or the new clocksource.) RTC drivers have no business using this header file, and in fact do not require it. Build tested on at91sam9rl, omap and s3c2410 configurations. Acked-by: Alessandro Zummo Acked-by: Andrew Victor Signed-off-by: Russell King --- drivers/rtc/rtc-at91rm9200.c | 2 -- drivers/rtc/rtc-at91sam9.c | 1 - drivers/rtc/rtc-omap.c | 1 - drivers/rtc/rtc-s3c.c | 2 -- 4 files changed, 6 deletions(-) diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index 39e64ab1ecb7..2af1e6fb71c0 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -31,8 +31,6 @@ #include #include -#include - #include diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 38d8742a4bdf..f0246ef413a4 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -19,7 +19,6 @@ #include #include -#include #include #include diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 58f81c774943..eb23d8423f42 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -22,7 +22,6 @@ #include #include -#include /* The OMAP1 RTC is a year/month/day/hours/minutes/seconds BCD clock diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index f26e0cad8f16..2c6e4671e388 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -28,8 +28,6 @@ #include #include -#include - #include /* I have yet to find an S3C implementation with more than one -- cgit v1.2.3 From 2dba8518b7761aee3ba757b298efa15dd34eff18 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 12:08:04 +0100 Subject: [RTC] rtc-pl031: use proper resources, use proper apis, clean up includes Clean up PL031 RTC includes, make driver use proper resource checking, and use amba bus specific accessors. Acked-by: Alessandro Zummo Signed-off-by: Russell King --- drivers/rtc/rtc-pl031.c | 36 +++++++++++++++--------------------- 1 file changed, 15 insertions(+), 21 deletions(-) diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 2fd49edcc712..08b4610ec5a6 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -12,23 +12,12 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - -#include #include #include #include -#include #include -#include -#include -#include - #include - -#include -#include -#include -#include +#include /* * Register definitions @@ -142,13 +131,12 @@ static int pl031_remove(struct amba_device *adev) { struct pl031_local *ldata = dev_get_drvdata(&adev->dev); - if (ldata) { - dev_set_drvdata(&adev->dev, NULL); - free_irq(adev->irq[0], ldata->rtc); - rtc_device_unregister(ldata->rtc); - iounmap(ldata->base); - kfree(ldata); - } + amba_set_drvdata(adev, NULL); + free_irq(adev->irq[0], ldata->rtc); + rtc_device_unregister(ldata->rtc); + iounmap(ldata->base); + kfree(ldata); + amba_release_regions(adev); return 0; } @@ -158,13 +146,15 @@ static int pl031_probe(struct amba_device *adev, void *id) int ret; struct pl031_local *ldata; + ret = amba_request_regions(adev, NULL); + if (ret) + goto err_req; ldata = kmalloc(sizeof(struct pl031_local), GFP_KERNEL); if (!ldata) { ret = -ENOMEM; goto out; } - dev_set_drvdata(&adev->dev, ldata); ldata->base = ioremap(adev->res.start, adev->res.end - adev->res.start + 1); @@ -173,6 +163,8 @@ static int pl031_probe(struct amba_device *adev, void *id) goto out_no_remap; } + amba_set_drvdata(adev, ldata); + if (request_irq(adev->irq[0], pl031_interrupt, IRQF_DISABLED, "rtc-pl031", ldata->rtc)) { ret = -EIO; @@ -192,10 +184,12 @@ out_no_rtc: free_irq(adev->irq[0], ldata->rtc); out_no_irq: iounmap(ldata->base); + amba_set_drvdata(adev, NULL); out_no_remap: - dev_set_drvdata(&adev->dev, NULL); kfree(ldata); out: + amba_release_regions(adev); +err_req: return ret; } -- cgit v1.2.3 From a190901c6b5f1f4a31681e8c69d811a4f9426e2b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 12:08:36 +0100 Subject: [RTC] rtc-pl030: add driver, remove old non-rtc lib driver Convert Integrator PL030 RTC driver to use the RTC class interfaces. Acked-by: Alessandro Zummo Signed-off-by: Russell King --- arch/arm/mach-integrator/Makefile | 2 +- arch/arm/mach-integrator/time.c | 223 -------------------------------------- drivers/rtc/Kconfig | 10 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-pl030.c | 217 +++++++++++++++++++++++++++++++++++++ 5 files changed, 229 insertions(+), 224 deletions(-) delete mode 100644 arch/arm/mach-integrator/time.c create mode 100644 drivers/rtc/rtc-pl030.c diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index 158daaf9e3b0..6a5ef8d30b10 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y := clock.o core.o lm.o time.o +obj-y := clock.o core.o lm.o obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o diff --git a/arch/arm/mach-integrator/time.c b/arch/arm/mach-integrator/time.c deleted file mode 100644 index 8508a0db3eaf..000000000000 --- a/arch/arm/mach-integrator/time.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - * linux/arch/arm/mach-integrator/time.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -#define RTC_DR (0) -#define RTC_MR (4) -#define RTC_STAT (8) -#define RTC_EOI (8) -#define RTC_LR (12) -#define RTC_CR (16) -#define RTC_CR_MIE (1 << 0) - -extern int (*set_rtc)(void); -static void __iomem *rtc_base; - -static int integrator_set_rtc(void) -{ - __raw_writel(xtime.tv_sec, rtc_base + RTC_LR); - return 1; -} - -static int integrator_rtc_read_alarm(struct rtc_wkalrm *alrm) -{ - rtc_time_to_tm(readl(rtc_base + RTC_MR), &alrm->time); - return 0; -} - -static inline int integrator_rtc_set_alarm(struct rtc_wkalrm *alrm) -{ - unsigned long time; - int ret; - - /* - * At the moment, we can only deal with non-wildcarded alarm times. - */ - ret = rtc_valid_tm(&alrm->time); - if (ret == 0) - ret = rtc_tm_to_time(&alrm->time, &time); - if (ret == 0) - writel(time, rtc_base + RTC_MR); - return ret; -} - -static int integrator_rtc_read_time(struct rtc_time *tm) -{ - rtc_time_to_tm(readl(rtc_base + RTC_DR), tm); - return 0; -} - -/* - * Set the RTC time. Unfortunately, we can't accurately set - * the point at which the counter updates. - * - * Also, since RTC_LR is transferred to RTC_CR on next rising - * edge of the 1Hz clock, we must write the time one second - * in advance. - */ -static inline int integrator_rtc_set_time(struct rtc_time *tm) -{ - unsigned long time; - int ret; - - ret = rtc_tm_to_time(tm, &time); - if (ret == 0) - writel(time + 1, rtc_base + RTC_LR); - - return ret; -} - -static struct rtc_ops rtc_ops = { - .owner = THIS_MODULE, - .read_time = integrator_rtc_read_time, - .set_time = integrator_rtc_set_time, - .read_alarm = integrator_rtc_read_alarm, - .set_alarm = integrator_rtc_set_alarm, -}; - -static irqreturn_t arm_rtc_interrupt(int irq, void *dev_id) -{ - writel(0, rtc_base + RTC_EOI); - return IRQ_HANDLED; -} - -static int rtc_probe(struct amba_device *dev, void *id) -{ - int ret; - - if (rtc_base) - return -EBUSY; - - ret = amba_request_regions(dev, NULL); - if (ret) - goto out; - - rtc_base = ioremap(dev->res.start, SZ_4K); - if (!rtc_base) { - ret = -ENOMEM; - goto res_out; - } - - __raw_writel(0, rtc_base + RTC_CR); - __raw_writel(0, rtc_base + RTC_EOI); - - xtime.tv_sec = __raw_readl(rtc_base + RTC_DR); - - /* note that 'dev' is merely used for irq disambiguation; - * it is not actually referenced in the irq handler - */ - ret = request_irq(dev->irq[0], arm_rtc_interrupt, IRQF_DISABLED, - "rtc-pl030", dev); - if (ret) - goto map_out; - - ret = register_rtc(&rtc_ops); - if (ret) - goto irq_out; - - set_rtc = integrator_set_rtc; - return 0; - - irq_out: - free_irq(dev->irq[0], dev); - map_out: - iounmap(rtc_base); - rtc_base = NULL; - res_out: - amba_release_regions(dev); - out: - return ret; -} - -static int rtc_remove(struct amba_device *dev) -{ - set_rtc = NULL; - - writel(0, rtc_base + RTC_CR); - - free_irq(dev->irq[0], dev); - unregister_rtc(&rtc_ops); - - iounmap(rtc_base); - rtc_base = NULL; - amba_release_regions(dev); - - return 0; -} - -static struct timespec rtc_delta; - -static int rtc_suspend(struct amba_device *dev, pm_message_t state) -{ - struct timespec rtc; - - rtc.tv_sec = readl(rtc_base + RTC_DR); - rtc.tv_nsec = 0; - save_time_delta(&rtc_delta, &rtc); - - return 0; -} - -static int rtc_resume(struct amba_device *dev) -{ - struct timespec rtc; - - rtc.tv_sec = readl(rtc_base + RTC_DR); - rtc.tv_nsec = 0; - restore_time_delta(&rtc_delta, &rtc); - - return 0; -} - -static struct amba_id rtc_ids[] = { - { - .id = 0x00041030, - .mask = 0x000fffff, - }, - { 0, 0 }, -}; - -static struct amba_driver rtc_driver = { - .drv = { - .name = "rtc-pl030", - }, - .probe = rtc_probe, - .remove = rtc_remove, - .suspend = rtc_suspend, - .resume = rtc_resume, - .id_table = rtc_ids, -}; - -static int __init integrator_rtc_init(void) -{ - return amba_driver_register(&rtc_driver); -} - -static void __exit integrator_rtc_exit(void) -{ - amba_driver_unregister(&rtc_driver); -} - -module_init(integrator_rtc_init); -module_exit(integrator_rtc_exit); diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 6cc2c0330230..1b26eeb52c97 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -458,6 +458,16 @@ config RTC_DRV_VR41XX To compile this driver as a module, choose M here: the module will be called rtc-vr41xx. +config RTC_DRV_PL030 + tristate "ARM AMBA PL030 RTC" + depends on ARM_AMBA + help + If you say Y here you will get access to ARM AMBA + PrimeCell PL030 RTC found on certain ARM SOCs. + + To compile this driver as a module, choose M here: the + module will be called rtc-pl030. + config RTC_DRV_PL031 tristate "ARM AMBA PL031 RTC" depends on ARM_AMBA diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 872f1218ff9f..af3ee6652ce5 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o +obj-$(CONFIG_RTC_DRV_PL030) += rtc-pl030.o obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c new file mode 100644 index 000000000000..8448eeb9d675 --- /dev/null +++ b/drivers/rtc/rtc-pl030.c @@ -0,0 +1,217 @@ +/* + * linux/drivers/rtc/rtc-pl030.c + * + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include + +#define RTC_DR (0) +#define RTC_MR (4) +#define RTC_STAT (8) +#define RTC_EOI (8) +#define RTC_LR (12) +#define RTC_CR (16) +#define RTC_CR_MIE (1 << 0) + +struct pl030_rtc { + struct rtc_device *rtc; + void __iomem *base; +}; + +static irqreturn_t pl030_interrupt(int irq, void *dev_id) +{ + struct pl030_rtc *rtc = dev_id; + writel(0, rtc->base + RTC_EOI); + return IRQ_HANDLED; +} + +static int pl030_open(struct device *dev) +{ + return 0; +} + +static void pl030_release(struct device *dev) +{ +} + +static int pl030_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) +{ + return -ENOIOCTLCMD; +} + +static int pl030_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct pl030_rtc *rtc = dev_get_drvdata(dev); + + rtc_time_to_tm(readl(rtc->base + RTC_MR), &alrm->time); + return 0; +} + +static int pl030_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct pl030_rtc *rtc = dev_get_drvdata(dev); + unsigned long time; + int ret; + + /* + * At the moment, we can only deal with non-wildcarded alarm times. + */ + ret = rtc_valid_tm(&alrm->time); + if (ret == 0) + ret = rtc_tm_to_time(&alrm->time, &time); + if (ret == 0) + writel(time, rtc->base + RTC_MR); + return ret; +} + +static int pl030_read_time(struct device *dev, struct rtc_time *tm) +{ + struct pl030_rtc *rtc = dev_get_drvdata(dev); + + rtc_time_to_tm(readl(rtc->base + RTC_DR), tm); + + return 0; +} + +/* + * Set the RTC time. Unfortunately, we can't accurately set + * the point at which the counter updates. + * + * Also, since RTC_LR is transferred to RTC_CR on next rising + * edge of the 1Hz clock, we must write the time one second + * in advance. + */ +static int pl030_set_time(struct device *dev, struct rtc_time *tm) +{ + struct pl030_rtc *rtc = dev_get_drvdata(dev); + unsigned long time; + int ret; + + ret = rtc_tm_to_time(tm, &time); + if (ret == 0) + writel(time + 1, rtc->base + RTC_LR); + + return ret; +} + +static const struct rtc_class_ops pl030_ops = { + .open = pl030_open, + .release = pl030_release, + .ioctl = pl030_ioctl, + .read_time = pl030_read_time, + .set_time = pl030_set_time, + .read_alarm = pl030_read_alarm, + .set_alarm = pl030_set_alarm, +}; + +static int pl030_probe(struct amba_device *dev, void *id) +{ + struct pl030_rtc *rtc; + int ret; + + ret = amba_request_regions(dev, NULL); + if (ret) + goto err_req; + + rtc = kmalloc(sizeof(*rtc), GFP_KERNEL); + if (!rtc) { + ret = -ENOMEM; + goto err_rtc; + } + + rtc->base = ioremap(dev->res.start, SZ_4K); + if (!rtc->base) { + ret = -ENOMEM; + goto err_map; + } + + __raw_writel(0, rtc->base + RTC_CR); + __raw_writel(0, rtc->base + RTC_EOI); + + amba_set_drvdata(dev, rtc); + + ret = request_irq(dev->irq[0], pl030_interrupt, IRQF_DISABLED, + "rtc-pl030", rtc); + if (ret) + goto err_irq; + + rtc->rtc = rtc_device_register("pl030", &dev->dev, &pl030_ops, + THIS_MODULE); + if (IS_ERR(rtc->rtc)) { + ret = PTR_ERR(rtc->rtc); + goto err_reg; + } + + return 0; + + err_reg: + free_irq(dev->irq[0], rtc); + err_irq: + iounmap(rtc->base); + err_map: + kfree(rtc); + err_rtc: + amba_release_regions(dev); + err_req: + return ret; +} + +static int pl030_remove(struct amba_device *dev) +{ + struct pl030_rtc *rtc = amba_get_drvdata(dev); + + amba_set_drvdata(dev, NULL); + + writel(0, rtc->base + RTC_CR); + + free_irq(dev->irq[0], rtc); + rtc_device_unregister(rtc->rtc); + iounmap(rtc->base); + kfree(rtc); + amba_release_regions(dev); + + return 0; +} + +static struct amba_id pl030_ids[] = { + { + .id = 0x00041030, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; + +static struct amba_driver pl030_driver = { + .drv = { + .name = "rtc-pl030", + }, + .probe = pl030_probe, + .remove = pl030_remove, + .id_table = pl030_ids, +}; + +static int __init pl030_init(void) +{ + return amba_driver_register(&pl030_driver); +} + +static void __exit pl030_exit(void) +{ + amba_driver_unregister(&pl030_driver); +} + +module_init(pl030_init); +module_exit(pl030_exit); + +MODULE_AUTHOR("Russell King "); +MODULE_DESCRIPTION("ARM AMBA PL030 RTC Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 7da285b626860eb6d35e08ae33eba90f0e83ad58 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 12:26:48 +0100 Subject: [RTC] remove unused asm/rtc.h includes from ARM RTC drivers On ARM, asm/rtc.h only contains definitions for the predecessor to the RTC class support. RTC class drivers should not be including this include. Build tested on at91sam9rl and s3c2410 configurations. Acked-by: Alessandro Zummo Signed-off-by: Russell King --- drivers/rtc/rtc-at91rm9200.c | 2 -- drivers/rtc/rtc-s3c.c | 2 -- 2 files changed, 4 deletions(-) diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c index 2af1e6fb71c0..9c3db934cc24 100644 --- a/drivers/rtc/rtc-at91rm9200.c +++ b/drivers/rtc/rtc-at91rm9200.c @@ -29,8 +29,6 @@ #include #include -#include - #include diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 2c6e4671e388..fed86e507fdf 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -26,8 +26,6 @@ #include #include #include -#include - #include /* I have yet to find an S3C implementation with more than one -- cgit v1.2.3 From 797276ec9e4d2ee210e11068a2ce815394fe8c58 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 12:30:41 +0100 Subject: [RTC] rtc-sa1100: remove dependence on asm/rtc.h Move the two functions rtc-sa1100 wants from the old ARM RTC library into the rtc-sa1100 driver. Acked-by: Alessandro Zummo Signed-off-by: Russell King --- drivers/rtc/rtc-sa1100.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 82f62d25f921..e31a687b44b9 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -33,7 +33,6 @@ #include #include -#include #ifdef CONFIG_ARCH_PXA #include @@ -47,6 +46,42 @@ static unsigned long rtc_freq = 1024; static struct rtc_time rtc_alarm; static DEFINE_SPINLOCK(sa1100_rtc_lock); +static inline int rtc_periodic_alarm(struct rtc_time *tm) +{ + return (tm->tm_year == -1) || + ((unsigned)tm->tm_mon >= 12) || + ((unsigned)(tm->tm_mday - 1) >= 31) || + ((unsigned)tm->tm_hour > 23) || + ((unsigned)tm->tm_min > 59) || + ((unsigned)tm->tm_sec > 59); +} + +/* + * Calculate the next alarm time given the requested alarm time mask + * and the current time. + */ +static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm) +{ + unsigned long next_time; + unsigned long now_time; + + next->tm_year = now->tm_year; + next->tm_mon = now->tm_mon; + next->tm_mday = now->tm_mday; + next->tm_hour = alrm->tm_hour; + next->tm_min = alrm->tm_min; + next->tm_sec = alrm->tm_sec; + + rtc_tm_to_time(now, &now_time); + rtc_tm_to_time(next, &next_time); + + if (next_time < now_time) { + /* Advance one day */ + next_time += 60 * 60 * 24; + rtc_time_to_tm(next_time, next); + } +} + static int rtc_update_alarm(struct rtc_time *alrm) { struct rtc_time alarm_tm, now_tm; -- cgit v1.2.3 From bedd78ca786c1d18c2a2785c7e40593dc9c9870f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 20 Apr 2008 12:31:29 +0100 Subject: [RTC] remove old ARM rtc library code Now that all drivers using it are gone, remove the old ARM RTC library. Acked-by: Alessandro Zummo Signed-off-by: Russell King --- arch/arm/common/Makefile | 1 - arch/arm/common/rtctime.c | 434 ---------------------------------------------- include/asm-arm/rtc.h | 43 ----- 3 files changed, 478 deletions(-) delete mode 100644 arch/arm/common/rtctime.c delete mode 100644 include/asm-arm/rtc.h diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 3d0b9fa42f84..325e4b6a6afb 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -2,7 +2,6 @@ # Makefile for the linux kernel. # -obj-y += rtctime.o obj-$(CONFIG_ARM_GIC) += gic.o obj-$(CONFIG_ARM_VIC) += vic.o obj-$(CONFIG_ICST525) += icst525.o diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c deleted file mode 100644 index aa8f7739c822..000000000000 --- a/arch/arm/common/rtctime.c +++ /dev/null @@ -1,434 +0,0 @@ -/* - * linux/arch/arm/common/rtctime.c - * - * Copyright (C) 2003 Deep Blue Solutions Ltd. - * Based on sa1100-rtc.c, Nils Faerber, CIH, Nicolas Pitre. - * Based on rtc.c by Paul Gortmaker - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -static DECLARE_WAIT_QUEUE_HEAD(rtc_wait); -static struct fasync_struct *rtc_async_queue; - -/* - * rtc_lock protects rtc_irq_data - */ -static DEFINE_SPINLOCK(rtc_lock); -static unsigned long rtc_irq_data; - -/* - * rtc_sem protects rtc_inuse and rtc_ops - */ -static DEFINE_MUTEX(rtc_mutex); -static unsigned long rtc_inuse; -static struct rtc_ops *rtc_ops; - -#define rtc_epoch 1900UL - -/* - * Calculate the next alarm time given the requested alarm time mask - * and the current time. - */ -void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm) -{ - unsigned long next_time; - unsigned long now_time; - - next->tm_year = now->tm_year; - next->tm_mon = now->tm_mon; - next->tm_mday = now->tm_mday; - next->tm_hour = alrm->tm_hour; - next->tm_min = alrm->tm_min; - next->tm_sec = alrm->tm_sec; - - rtc_tm_to_time(now, &now_time); - rtc_tm_to_time(next, &next_time); - - if (next_time < now_time) { - /* Advance one day */ - next_time += 60 * 60 * 24; - rtc_time_to_tm(next_time, next); - } -} -EXPORT_SYMBOL(rtc_next_alarm_time); - -static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm) -{ - memset(tm, 0, sizeof(struct rtc_time)); - return ops->read_time(tm); -} - -static inline int rtc_arm_set_time(struct rtc_ops *ops, struct rtc_time *tm) -{ - int ret; - - ret = rtc_valid_tm(tm); - if (ret == 0) - ret = ops->set_time(tm); - - return ret; -} - -static inline int rtc_arm_read_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm) -{ - int ret = -EINVAL; - if (ops->read_alarm) { - memset(alrm, 0, sizeof(struct rtc_wkalrm)); - ret = ops->read_alarm(alrm); - } - return ret; -} - -static inline int rtc_arm_set_alarm(struct rtc_ops *ops, struct rtc_wkalrm *alrm) -{ - int ret = -EINVAL; - if (ops->set_alarm) - ret = ops->set_alarm(alrm); - return ret; -} - -void rtc_update(unsigned long num, unsigned long events) -{ - spin_lock(&rtc_lock); - rtc_irq_data = (rtc_irq_data + (num << 8)) | events; - spin_unlock(&rtc_lock); - - wake_up_interruptible(&rtc_wait); - kill_fasync(&rtc_async_queue, SIGIO, POLL_IN); -} -EXPORT_SYMBOL(rtc_update); - - -static ssize_t -rtc_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) -{ - DECLARE_WAITQUEUE(wait, current); - unsigned long data; - ssize_t ret; - - if (count < sizeof(unsigned long)) - return -EINVAL; - - add_wait_queue(&rtc_wait, &wait); - do { - __set_current_state(TASK_INTERRUPTIBLE); - - spin_lock_irq(&rtc_lock); - data = rtc_irq_data; - rtc_irq_data = 0; - spin_unlock_irq(&rtc_lock); - - if (data != 0) { - ret = 0; - break; - } - if (file->f_flags & O_NONBLOCK) { - ret = -EAGAIN; - break; - } - if (signal_pending(current)) { - ret = -ERESTARTSYS; - break; - } - schedule(); - } while (1); - set_current_state(TASK_RUNNING); - remove_wait_queue(&rtc_wait, &wait); - - if (ret == 0) { - ret = put_user(data, (unsigned long __user *)buf); - if (ret == 0) - ret = sizeof(unsigned long); - } - return ret; -} - -static unsigned int rtc_poll(struct file *file, poll_table *wait) -{ - unsigned long data; - - poll_wait(file, &rtc_wait, wait); - - spin_lock_irq(&rtc_lock); - data = rtc_irq_data; - spin_unlock_irq(&rtc_lock); - - return data != 0 ? POLLIN | POLLRDNORM : 0; -} - -static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) -{ - struct rtc_ops *ops = file->private_data; - struct rtc_time tm; - struct rtc_wkalrm alrm; - void __user *uarg = (void __user *)arg; - int ret = -EINVAL; - - switch (cmd) { - case RTC_ALM_READ: - ret = rtc_arm_read_alarm(ops, &alrm); - if (ret) - break; - ret = copy_to_user(uarg, &alrm.time, sizeof(tm)); - if (ret) - ret = -EFAULT; - break; - - case RTC_ALM_SET: - ret = copy_from_user(&alrm.time, uarg, sizeof(tm)); - if (ret) { - ret = -EFAULT; - break; - } - alrm.enabled = 0; - alrm.pending = 0; - alrm.time.tm_mday = -1; - alrm.time.tm_mon = -1; - alrm.time.tm_year = -1; - alrm.time.tm_wday = -1; - alrm.time.tm_yday = -1; - alrm.time.tm_isdst = -1; - ret = rtc_arm_set_alarm(ops, &alrm); - break; - - case RTC_RD_TIME: - ret = rtc_arm_read_time(ops, &tm); - if (ret) - break; - ret = copy_to_user(uarg, &tm, sizeof(tm)); - if (ret) - ret = -EFAULT; - break; - - case RTC_SET_TIME: - if (!capable(CAP_SYS_TIME)) { - ret = -EACCES; - break; - } - ret = copy_from_user(&tm, uarg, sizeof(tm)); - if (ret) { - ret = -EFAULT; - break; - } - ret = rtc_arm_set_time(ops, &tm); - break; - - case RTC_EPOCH_SET: -#ifndef rtc_epoch - /* - * There were no RTC clocks before 1900. - */ - if (arg < 1900) { - ret = -EINVAL; - break; - } - if (!capable(CAP_SYS_TIME)) { - ret = -EACCES; - break; - } - rtc_epoch = arg; - ret = 0; -#endif - break; - - case RTC_EPOCH_READ: - ret = put_user(rtc_epoch, (unsigned long __user *)uarg); - break; - - case RTC_WKALM_SET: - ret = copy_from_user(&alrm, uarg, sizeof(alrm)); - if (ret) { - ret = -EFAULT; - break; - } - ret = rtc_arm_set_alarm(ops, &alrm); - break; - - case RTC_WKALM_RD: - ret = rtc_arm_read_alarm(ops, &alrm); - if (ret) - break; - ret = copy_to_user(uarg, &alrm, sizeof(alrm)); - if (ret) - ret = -EFAULT; - break; - - default: - if (ops->ioctl) - ret = ops->ioctl(cmd, arg); - break; - } - return ret; -} - -static int rtc_open(struct inode *inode, struct file *file) -{ - int ret; - - mutex_lock(&rtc_mutex); - - if (rtc_inuse) { - ret = -EBUSY; - } else if (!rtc_ops || !try_module_get(rtc_ops->owner)) { - ret = -ENODEV; - } else { - file->private_data = rtc_ops; - - ret = rtc_ops->open ? rtc_ops->open() : 0; - if (ret == 0) { - spin_lock_irq(&rtc_lock); - rtc_irq_data = 0; - spin_unlock_irq(&rtc_lock); - - rtc_inuse = 1; - } - } - mutex_unlock(&rtc_mutex); - - return ret; -} - -static int rtc_release(struct inode *inode, struct file *file) -{ - struct rtc_ops *ops = file->private_data; - - if (ops->release) - ops->release(); - - spin_lock_irq(&rtc_lock); - rtc_irq_data = 0; - spin_unlock_irq(&rtc_lock); - - module_put(rtc_ops->owner); - rtc_inuse = 0; - - return 0; -} - -static int rtc_fasync(int fd, struct file *file, int on) -{ - return fasync_helper(fd, file, on, &rtc_async_queue); -} - -static const struct file_operations rtc_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = rtc_read, - .poll = rtc_poll, - .ioctl = rtc_ioctl, - .open = rtc_open, - .release = rtc_release, - .fasync = rtc_fasync, -}; - -static struct miscdevice rtc_miscdev = { - .minor = RTC_MINOR, - .name = "rtc", - .fops = &rtc_fops, -}; - - -static int rtc_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data) -{ - struct rtc_ops *ops = data; - struct rtc_wkalrm alrm; - struct rtc_time tm; - char *p = page; - - if (rtc_arm_read_time(ops, &tm) == 0) { - p += sprintf(p, - "rtc_time\t: %02d:%02d:%02d\n" - "rtc_date\t: %04d-%02d-%02d\n" - "rtc_epoch\t: %04lu\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, - tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, - rtc_epoch); - } - - if (rtc_arm_read_alarm(ops, &alrm) == 0) { - p += sprintf(p, "alrm_time\t: "); - if ((unsigned int)alrm.time.tm_hour <= 24) - p += sprintf(p, "%02d:", alrm.time.tm_hour); - else - p += sprintf(p, "**:"); - if ((unsigned int)alrm.time.tm_min <= 59) - p += sprintf(p, "%02d:", alrm.time.tm_min); - else - p += sprintf(p, "**:"); - if ((unsigned int)alrm.time.tm_sec <= 59) - p += sprintf(p, "%02d\n", alrm.time.tm_sec); - else - p += sprintf(p, "**\n"); - - p += sprintf(p, "alrm_date\t: "); - if ((unsigned int)alrm.time.tm_year <= 200) - p += sprintf(p, "%04d-", alrm.time.tm_year + 1900); - else - p += sprintf(p, "****-"); - if ((unsigned int)alrm.time.tm_mon <= 11) - p += sprintf(p, "%02d-", alrm.time.tm_mon + 1); - else - p += sprintf(p, "**-"); - if ((unsigned int)alrm.time.tm_mday <= 31) - p += sprintf(p, "%02d\n", alrm.time.tm_mday); - else - p += sprintf(p, "**\n"); - p += sprintf(p, "alrm_wakeup\t: %s\n", - alrm.enabled ? "yes" : "no"); - p += sprintf(p, "alrm_pending\t: %s\n", - alrm.pending ? "yes" : "no"); - } - - if (ops->proc) - p += ops->proc(p); - - return p - page; -} - -int register_rtc(struct rtc_ops *ops) -{ - int ret = -EBUSY; - - mutex_lock(&rtc_mutex); - if (rtc_ops == NULL) { - rtc_ops = ops; - - ret = misc_register(&rtc_miscdev); - if (ret == 0) - create_proc_read_entry("driver/rtc", 0, NULL, - rtc_read_proc, ops); - } - mutex_unlock(&rtc_mutex); - - return ret; -} -EXPORT_SYMBOL(register_rtc); - -void unregister_rtc(struct rtc_ops *rtc) -{ - mutex_lock(&rtc_mutex); - if (rtc == rtc_ops) { - remove_proc_entry("driver/rtc", NULL); - misc_deregister(&rtc_miscdev); - rtc_ops = NULL; - } - mutex_unlock(&rtc_mutex); -} -EXPORT_SYMBOL(unregister_rtc); diff --git a/include/asm-arm/rtc.h b/include/asm-arm/rtc.h deleted file mode 100644 index 1a5c9232a91e..000000000000 --- a/include/asm-arm/rtc.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * linux/include/asm-arm/rtc.h - * - * Copyright (C) 2003 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef ASMARM_RTC_H -#define ASMARM_RTC_H - -struct module; - -struct rtc_ops { - struct module *owner; - int (*open)(void); - void (*release)(void); - int (*ioctl)(unsigned int, unsigned long); - - int (*read_time)(struct rtc_time *); - int (*set_time)(struct rtc_time *); - int (*read_alarm)(struct rtc_wkalrm *); - int (*set_alarm)(struct rtc_wkalrm *); - int (*proc)(char *buf); -}; - -void rtc_next_alarm_time(struct rtc_time *, struct rtc_time *, struct rtc_time *); -void rtc_update(unsigned long, unsigned long); -int register_rtc(struct rtc_ops *); -void unregister_rtc(struct rtc_ops *); - -static inline int rtc_periodic_alarm(struct rtc_time *tm) -{ - return (tm->tm_year == -1) || - ((unsigned)tm->tm_mon >= 12) || - ((unsigned)(tm->tm_mday - 1) >= 31) || - ((unsigned)tm->tm_hour > 23) || - ((unsigned)tm->tm_min > 59) || - ((unsigned)tm->tm_sec > 59); -} - -#endif -- cgit v1.2.3 From 0748aca6f0af917591dcfd70dccac770a25d4f71 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 13 May 2008 10:34:20 +0200 Subject: x86: remove useless static current_tsc_khz variable current_tsc_khz is just written by the init code and never used again. Remove it. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/tsc_32.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index e4790728b224..d53b1040cbb7 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -283,7 +283,6 @@ core_initcall(cpufreq_tsc); /* clock source code */ -static unsigned long current_tsc_khz; static struct clocksource clocksource_tsc; /* @@ -434,9 +433,8 @@ void __init tsc_init(void) unsynchronized_tsc(); check_geode_tsc_reliable(); - current_tsc_khz = tsc_khz; - clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz, - clocksource_tsc.shift); + clocksource_tsc.mult = clocksource_khz2mult(tsc_khz, + clocksource_tsc.shift); /* lower the rating if we already know its unstable: */ if (check_tsc_unstable()) { clocksource_tsc.rating = 0; -- cgit v1.2.3 From 3843fc2575e3389f4f0ad0420a720240a5746a5d Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 9 May 2008 12:05:57 +0100 Subject: xen: remove support for non-PAE 32-bit Non-PAE operation has been deprecated in Xen for a while, and is rarely tested or used. xen-unstable has now officially dropped non-PAE support. Since Xen/pvops' non-PAE support has also been broken for a while, we may as well completely drop it altogether. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/xen/Kconfig | 2 +- arch/x86/xen/enlighten.c | 51 ++++++++++++++++------------------------------ arch/x86/xen/mmu.c | 19 ++--------------- arch/x86/xen/mmu.h | 24 ++++++---------------- arch/x86/xen/xen-head.S | 4 ---- include/asm-x86/xen/page.h | 4 ---- 6 files changed, 27 insertions(+), 77 deletions(-) diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 2e641be2737e..525b108411bd 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -6,7 +6,7 @@ config XEN bool "Xen guest support" select PARAVIRT depends on X86_32 - depends on X86_CMPXCHG && X86_TSC && !(X86_VISWS || X86_VOYAGER) + depends on X86_CMPXCHG && X86_TSC && X86_PAE && !(X86_VISWS || X86_VOYAGER) help This is the Linux Xen port. Enabling this will allow the kernel to boot in a paravirtualized environment under the diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c8a56e457d61..a05b7721bc81 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -785,38 +785,35 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte) static __init void xen_pagetable_setup_start(pgd_t *base) { pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base; + int i; /* special set_pte for pagetable initialization */ pv_mmu_ops.set_pte = xen_set_pte_init; init_mm.pgd = base; /* - * copy top-level of Xen-supplied pagetable into place. For - * !PAE we can use this as-is, but for PAE it is a stand-in - * while we copy the pmd pages. + * copy top-level of Xen-supplied pagetable into place. This + * is a stand-in while we copy the pmd pages. */ memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t)); - if (PTRS_PER_PMD > 1) { - int i; - /* - * For PAE, need to allocate new pmds, rather than - * share Xen's, since Xen doesn't like pmd's being - * shared between address spaces. - */ - for (i = 0; i < PTRS_PER_PGD; i++) { - if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) { - pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE); + /* + * For PAE, need to allocate new pmds, rather than + * share Xen's, since Xen doesn't like pmd's being + * shared between address spaces. + */ + for (i = 0; i < PTRS_PER_PGD; i++) { + if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) { + pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE); - memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]), - PAGE_SIZE); + memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]), + PAGE_SIZE); - make_lowmem_page_readonly(pmd); + make_lowmem_page_readonly(pmd); - set_pgd(&base[i], __pgd(1 + __pa(pmd))); - } else - pgd_clear(&base[i]); - } + set_pgd(&base[i], __pgd(1 + __pa(pmd))); + } else + pgd_clear(&base[i]); } /* make sure zero_page is mapped RO so we can use it in pagetables */ @@ -873,17 +870,7 @@ static __init void xen_pagetable_setup_done(pgd_t *base) /* Actually pin the pagetable down, but we can't set PG_pinned yet because the page structures don't exist yet. */ - { - unsigned level; - -#ifdef CONFIG_X86_PAE - level = MMUEXT_PIN_L3_TABLE; -#else - level = MMUEXT_PIN_L2_TABLE; -#endif - - pin_pagetable_pfn(level, PFN_DOWN(__pa(base))); - } + pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base))); } /* This is called once we have the cpu_possible_map */ @@ -1093,7 +1080,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .make_pte = xen_make_pte, .make_pgd = xen_make_pgd, -#ifdef CONFIG_X86_PAE .set_pte_atomic = xen_set_pte_atomic, .set_pte_present = xen_set_pte_at, .set_pud = xen_set_pud, @@ -1102,7 +1088,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .make_pmd = xen_make_pmd, .pmd_val = xen_pmd_val, -#endif /* PAE */ .activate_mm = xen_activate_mm, .dup_mmap = xen_dup_mmap, diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 126766d43aea..07c2653ec335 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -222,7 +222,7 @@ pmdval_t xen_pmd_val(pmd_t pmd) ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT; return ret; } -#ifdef CONFIG_X86_PAE + void xen_set_pud(pud_t *ptr, pud_t val) { struct multicall_space mcs; @@ -272,12 +272,6 @@ pmd_t xen_make_pmd(pmdval_t pmd) return native_make_pmd(pmd); } -#else /* !PAE */ -void xen_set_pte(pte_t *ptep, pte_t pte) -{ - *ptep = pte; -} -#endif /* CONFIG_X86_PAE */ /* (Yet another) pagetable walker. This one is intended for pinning a @@ -430,8 +424,6 @@ static int pin_page(struct page *page, enum pt_level level) read-only, and can be pinned. */ void xen_pgd_pin(pgd_t *pgd) { - unsigned level; - xen_mc_batch(); if (pgd_walk(pgd, pin_page, TASK_SIZE)) { @@ -441,14 +433,7 @@ void xen_pgd_pin(pgd_t *pgd) xen_mc_batch(); } -#ifdef CONFIG_X86_PAE - level = MMUEXT_PIN_L3_TABLE; -#else - level = MMUEXT_PIN_L2_TABLE; -#endif - - xen_do_pin(level, PFN_DOWN(__pa(pgd))); - + xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd))); xen_mc_issue(0); } diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index b5e189b1519d..5fe961caffd4 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -37,14 +37,13 @@ void xen_exit_mmap(struct mm_struct *mm); void xen_pgd_pin(pgd_t *pgd); //void xen_pgd_unpin(pgd_t *pgd); -#ifdef CONFIG_X86_PAE -unsigned long long xen_pte_val(pte_t); -unsigned long long xen_pmd_val(pmd_t); -unsigned long long xen_pgd_val(pgd_t); +pteval_t xen_pte_val(pte_t); +pmdval_t xen_pmd_val(pmd_t); +pgdval_t xen_pgd_val(pgd_t); -pte_t xen_make_pte(unsigned long long); -pmd_t xen_make_pmd(unsigned long long); -pgd_t xen_make_pgd(unsigned long long); +pte_t xen_make_pte(pteval_t); +pmd_t xen_make_pmd(pmdval_t); +pgd_t xen_make_pgd(pgdval_t); void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval); @@ -53,15 +52,4 @@ void xen_set_pud(pud_t *ptr, pud_t val); void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); void xen_pmd_clear(pmd_t *pmdp); - -#else -unsigned long xen_pte_val(pte_t); -unsigned long xen_pmd_val(pmd_t); -unsigned long xen_pgd_val(pgd_t); - -pte_t xen_make_pte(unsigned long); -pmd_t xen_make_pmd(unsigned long); -pgd_t xen_make_pgd(unsigned long); -#endif - #endif /* _XEN_MMU_H */ diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 288d587ce73c..2ab5f42f34d8 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -30,11 +30,7 @@ ENTRY(hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, .long startup_xen) ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz "!writable_page_tables|pae_pgdir_above_4gb") -#ifdef CONFIG_X86_PAE ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes") -#else - ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "no") -#endif ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic") #endif /*CONFIG_XEN */ diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h index baf3a4dce28c..e11f24038b1d 100644 --- a/include/asm-x86/xen/page.h +++ b/include/asm-x86/xen/page.h @@ -150,13 +150,9 @@ static inline pte_t __pte_ma(pteval_t x) return (pte_t) { .pte = x }; } -#ifdef CONFIG_X86_PAE #define pmd_val_ma(v) ((v).pmd) #define pud_val_ma(v) ((v).pgd.pgd) #define __pmd_ma(x) ((pmd_t) { (x) } ) -#else /* !X86_PAE */ -#define pmd_val_ma(v) ((v).pud.pgd.pgd) -#endif /* CONFIG_X86_PAE */ #define pgd_val_ma(x) ((x).pgd) -- cgit v1.2.3 From b478458aeebfc55fe409abec43794ac72a623c79 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:39 +0200 Subject: x86: avoid re-loading LDT in unrelated address spaces Performance optimization. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/ldt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index 0224c3637c73..21f2bae98c15 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -20,9 +20,9 @@ #include #ifdef CONFIG_SMP -static void flush_ldt(void *null) +static void flush_ldt(void *current_mm) { - if (current->active_mm) + if (current->active_mm == current_mm) load_LDT(¤t->active_mm->context); } #endif @@ -68,7 +68,7 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload) load_LDT(pc); mask = cpumask_of_cpu(smp_processor_id()); if (!cpus_equal(current->mm->cpu_vm_mask, mask)) - smp_call_function(flush_ldt, NULL, 1, 1); + smp_call_function(flush_ldt, current->mm, 1, 1); preempt_enable(); #else load_LDT(pc); -- cgit v1.2.3 From 873b274a41c0cfe58b2eb0a7722424eb367b905b Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 13:02:23 -0400 Subject: x86: Add Centaur and Transmeta CPUs to PAT whitelist Unconditionally enable PAT support on Centaur and Transmeta CPUs. All known models that advertise PAT have no known errata. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/addon_cpuid_features.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index c2e1ce33c7cb..d8b3e4a9d663 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -62,6 +62,9 @@ void __cpuinit validate_pat_support(struct cpuinfo_x86 *c) if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15)) return; break; + case X86_VENDOR_CENTAUR: + case X86_VENDOR_TRANSMETA: + return; } pat_disable(cpu_has_pat ? -- cgit v1.2.3 From c3ed64295f0fed9131b42122234b1ce4a4a266cf Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Fri, 16 May 2008 10:44:39 -0700 Subject: x86: change maximum NR_CPUS to 4096 and MAX_NUMNODES to 512 * Change the range of NR_CPUS from 2-255 to 2-4096 and change the range of MAX_NUMNODES (NODES_SHIFT) from 1-32768 to 1-512. * Alter comment about how much each increment of NR_CPUS consumes. (This was found by configuring for 256 cpus and then 512 cpus and dividing the difference by 256.) Signed-off-by: Mike Travis Cc: Andrew Morton Cc: Dave Jones Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fe361ae7ef2f..bbafeac89116 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -565,18 +565,18 @@ config IOMMU_HELPER def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB) config NR_CPUS - int "Maximum number of CPUs (2-255)" - range 2 255 + int "Maximum number of CPUs (2-4096)" + range 2 4096 depends on SMP default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000 default "8" help This allows you to specify the maximum number of CPUs which this - kernel will support. The maximum supported value is 255 and the + kernel will support. The maximum supported value is 4096 and the minimum value which makes sense is 2. This is purely to save memory - each supported CPU adds - approximately eight kilobytes to the kernel image. + approximately one kilobyte to the kernel image. config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" @@ -968,8 +968,8 @@ config NUMA_EMU number of nodes. This is only useful for debugging. config NODES_SHIFT - int "Max num nodes shift(1-15)" - range 1 15 if X86_64 + int "Max num nodes shift(1-9)" + range 1 9 if X86_64 default "6" if X86_64 default "4" if X86_NUMAQ default "3" -- cgit v1.2.3 From 21451155d8858773ee764e9218de2ca0f4d6fc38 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 30 Apr 2008 00:05:24 +1000 Subject: [POWERPC] of/gpio: Use dynamic base allocation Since the "gpiolib: dynamic gpio number allocation" patch was recently merged into Linus' tree (commit 8d0aab2f16c4fa170f32e7a74a52cd0122bbafef), we can use dynamic GPIO base allocation now. This, in turn, removes number of gpios per chip constraint. Signed-off-by: Anton Vorontsov Signed-off-by: Paul Mackerras --- drivers/of/gpio.c | 38 +------------------------------------- 1 file changed, 1 insertion(+), 37 deletions(-) diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c index 000681e98f2c..1c9cab844f10 100644 --- a/drivers/of/gpio.c +++ b/drivers/of/gpio.c @@ -137,38 +137,6 @@ int of_gpio_simple_xlate(struct of_gpio_chip *of_gc, struct device_node *np, } EXPORT_SYMBOL(of_gpio_simple_xlate); -/* Should be sufficient for now, later we'll use dynamic bases. */ -#if defined(CONFIG_PPC32) || defined(CONFIG_SPARC32) -#define GPIOS_PER_CHIP 32 -#else -#define GPIOS_PER_CHIP 64 -#endif - -static int of_get_gpiochip_base(struct device_node *np) -{ - struct device_node *gc = NULL; - int gpiochip_base = 0; - - while ((gc = of_find_all_nodes(gc))) { - if (!of_get_property(gc, "gpio-controller", NULL)) - continue; - - if (gc != np) { - gpiochip_base += GPIOS_PER_CHIP; - continue; - } - - of_node_put(gc); - - if (gpiochip_base >= ARCH_NR_GPIOS) - return -ENOSPC; - - return gpiochip_base; - } - - return -ENOENT; -} - /** * of_mm_gpiochip_add - Add memory mapped GPIO chip (bank) * @np: device node of the GPIO chip @@ -205,11 +173,7 @@ int of_mm_gpiochip_add(struct device_node *np, if (!mm_gc->regs) goto err1; - gc->base = of_get_gpiochip_base(np); - if (gc->base < 0) { - ret = gc->base; - goto err1; - } + gc->base = -1; if (!of_gc->xlate) of_gc->xlate = of_gpio_simple_xlate; -- cgit v1.2.3 From 2ca7633dc73405ee775a2e9b7961b47a38bc882d Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Sun, 11 May 2008 10:40:47 +1000 Subject: [POWERPC] Tweak VDSO linker script to avoid upsetting old binutils This works around bugs in older binutils' objcopy. The placement of these sections does not really matter, but it confused the buggy old BFD libraries. Signed-off-by: Roland McGrath Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/vdso64/vdso64.lds.S | 6 +++--- include/asm-powerpc/ppc_asm.h | 6 ++++++ 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S index 932b3fdb34b9..7d6585f90277 100644 --- a/arch/powerpc/kernel/vdso64/vdso64.lds.S +++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S @@ -43,15 +43,15 @@ SECTIONS .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) } .rodata1 : { *(.rodata1) } + .dynamic : { *(.dynamic) } :text :dynamic + .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr .eh_frame : { KEEP (*(.eh_frame)) } :text .gcc_except_table : { *(.gcc_except_table) } + .rela.dyn ALIGN(8) : { *(.rela.dyn) } .opd ALIGN(8) : { KEEP (*(.opd)) } .got ALIGN(8) : { *(.got .toc) } - .rela.dyn ALIGN(8) : { *(.rela.dyn) } - - .dynamic : { *(.dynamic) } :text :dynamic _end = .; PROVIDE(end = .); diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h index 2dbd4e7884fa..ef96bfd4ef4c 100644 --- a/include/asm-powerpc/ppc_asm.h +++ b/include/asm-powerpc/ppc_asm.h @@ -356,6 +356,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) #define toreal(rd) #define fromreal(rd) +/* + * We use addis to ensure compatibility with the "classic" ppc versions of + * these macros, which use rs = 0 to get the tophys offset in rd, rather than + * converting the address in r0, and so this version has to do that too + * (i.e. set register rd to 0 when rs == 0). + */ #define tophys(rd,rs) \ addis rd,rs,0 -- cgit v1.2.3 From 475ca391b490a683d66bf19999a8a7a24913f139 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 22 May 2008 06:59:23 +1000 Subject: [POWERPC] mpic: Deal with bogus NIRQ in Feature Reporting Register Some chips (like the SoCs from Freescale) report the wrong value in NIRQ and this causes issues if its doesn't match or exceed the value of irq_count. Add a flag that board code can set to just use irq_count instead of FRR[NIRQ]. Eventually we'll add a device tree property with the number of sources. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/sysdev/mpic.c | 9 ++++++--- include/asm-powerpc/mpic.h | 2 ++ 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 8619f2a3f1f6..466e2183e86c 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1144,9 +1144,12 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK) >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1; if (isu_size == 0) - mpic->num_sources = - ((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK) - >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1; + if (flags & MPIC_BROKEN_FRR_NIRQS) + mpic->num_sources = mpic->irq_count; + else + mpic->num_sources = + ((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK) + >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1; /* Map the per-CPU registers */ for (i = 0; i < mpic->num_cpus; i++) { diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h index 943c5a3fac8a..6802570f4240 100644 --- a/include/asm-powerpc/mpic.h +++ b/include/asm-powerpc/mpic.h @@ -353,6 +353,8 @@ struct mpic #define MPIC_ENABLE_MCK 0x00000200 /* Disable bias among target selection, spread interrupts evenly */ #define MPIC_NO_BIAS 0x00000400 +/* Ignore NIRQS as reported by FRR */ +#define MPIC_BROKEN_FRR_NIRQS 0x00000800 /* MPIC HW modification ID */ #define MPIC_REGSET_MASK 0xf0000000 -- cgit v1.2.3 From 72cac213fda6a2dd402e91692b70e175795eab7d Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 May 2008 14:21:30 +1000 Subject: [POWERPC] Add debugging trigger to Axon MSI code This adds some debugging code to the Axon MSI driver. It creates a file per MSIC in /sys/kernel/debug/powerpc, which allows the user to trigger a fake MSI interrupt by writing to the file. This can be used to test some of the MSI generation path. In particular, that the MSIC recognises a write to the MSI address, generates an interrupt and writes the MSI packet into the ring buffer. All the code is inside #ifdef DEBUG so it causes no harm unless it's enabled. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/axon_msi.c | 58 ++++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index c39f5c225f2e..8b055bce27fe 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -69,8 +70,19 @@ struct axon_msic { dma_addr_t fifo_phys; dcr_host_t dcr_host; u32 read_offset; +#ifdef DEBUG + u32 __iomem *trigger; +#endif }; +#ifdef DEBUG +void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic); +#else +static inline void axon_msi_debug_setup(struct device_node *dn, + struct axon_msic *msic) { } +#endif + + static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val) { pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n); @@ -381,6 +393,8 @@ static int axon_msi_probe(struct of_device *device, ppc_md.teardown_msi_irqs = axon_msi_teardown_msi_irqs; ppc_md.msi_check_device = axon_msi_check_device; + axon_msi_debug_setup(dn, msic); + printk(KERN_DEBUG "axon_msi: setup MSIC on %s\n", dn->full_name); return 0; @@ -418,3 +432,47 @@ static int __init axon_msi_init(void) return of_register_platform_driver(&axon_msi_driver); } subsys_initcall(axon_msi_init); + + +#ifdef DEBUG +static int msic_set(void *data, u64 val) +{ + struct axon_msic *msic = data; + out_le32(msic->trigger, val); + return 0; +} + +static int msic_get(void *data, u64 *val) +{ + *val = 0; + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(fops_msic, msic_get, msic_set, "%llu\n"); + +void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic) +{ + char name[8]; + u64 addr; + + addr = of_translate_address(dn, of_get_property(dn, "reg", NULL)); + if (addr == OF_BAD_ADDR) { + pr_debug("axon_msi: couldn't translate reg property\n"); + return; + } + + msic->trigger = ioremap(addr, 0x4); + if (!msic->trigger) { + pr_debug("axon_msi: ioremap failed\n"); + return; + } + + snprintf(name, sizeof(name), "msic_%d", of_node_to_nid(dn)); + + if (!debugfs_create_file(name, 0600, powerpc_debugfs_root, + msic, &fops_msic)) { + pr_debug("axon_msi: debugfs_create_file failed!\n"); + return; + } +} +#endif /* DEBUG */ -- cgit v1.2.3 From 80d267f9aee6f1b5df602b5a19fb7b4923f17db2 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Fri, 23 May 2008 14:22:21 +1000 Subject: [POWERPC] Remove unnecessary cast in arch_deref_entry_point() func_descr_t->entry is already an unsigned long. Mea culpa. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/kprobes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index c176c513566b..23545a2f51f3 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -498,7 +498,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, #ifdef CONFIG_PPC64 unsigned long arch_deref_entry_point(void *entry) { - return (unsigned long)(((func_descr_t *)entry)->entry); + return ((func_descr_t *)entry)->entry; } #endif -- cgit v1.2.3 From bd3bff9e20f454b242d979ec2f9a4dca0d5fa06f Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:41 +0200 Subject: sched: add latency tracer callbacks to the scheduler add 3 lightweight callbacks to the tracer backend. zero impact if tracing is turned off. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/sched.h | 26 ++++++++++++++++++++++++++ kernel/sched.c | 3 +++ 2 files changed, 29 insertions(+) diff --git a/include/linux/sched.h b/include/linux/sched.h index 5395a6176f4b..717cab8a0c83 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2117,6 +2117,32 @@ static inline void arch_pick_mmap_layout(struct mm_struct *mm) } #endif +#ifdef CONFIG_CONTEXT_SWITCH_TRACER +extern void +ftrace_ctx_switch(struct task_struct *prev, struct task_struct *next); +#else +static inline void +ftrace_ctx_switch(struct task_struct *prev, struct task_struct *next) +{ +} +#endif + +#ifdef CONFIG_SCHED_TRACER +extern void +ftrace_wake_up_task(struct task_struct *wakee, struct task_struct *curr); +extern void +ftrace_wake_up_new_task(struct task_struct *wakee, struct task_struct *curr); +#else +static inline void +ftrace_wake_up_task(struct task_struct *wakee, struct task_struct *curr) +{ +} +static inline void +ftrace_wake_up_new_task(struct task_struct *wakee, struct task_struct *curr) +{ +} +#endif + extern long sched_setaffinity(pid_t pid, const cpumask_t *new_mask); extern long sched_getaffinity(pid_t pid, cpumask_t *mask); diff --git a/kernel/sched.c b/kernel/sched.c index cfa222a91539..463dcdb36ef8 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2467,6 +2467,7 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync) out_activate: #endif /* CONFIG_SMP */ + ftrace_wake_up_task(p, rq->curr); schedstat_inc(p, se.nr_wakeups); if (sync) schedstat_inc(p, se.nr_wakeups_sync); @@ -2611,6 +2612,7 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags) p->sched_class->task_new(rq, p); inc_nr_running(rq); } + ftrace_wake_up_new_task(p, rq->curr); check_preempt_curr(rq, p); #ifdef CONFIG_SMP if (p->sched_class->task_wake_up) @@ -2783,6 +2785,7 @@ context_switch(struct rq *rq, struct task_struct *prev, struct mm_struct *mm, *oldmm; prepare_task_switch(rq, prev, next); + ftrace_ctx_switch(prev, next); mm = next->mm; oldmm = prev->active_mm; /* -- cgit v1.2.3 From 7c731e0a495e25e79dc1e9e68772a67a55721a65 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:41 +0200 Subject: ftrace: make the task state char-string visible to all The tracer wants to be able to convert the state number into a user visible character. This patch pulls that conversion string out the scheduler into the header. This way if it were to ever change, other parts of the kernel will know. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/sched.h | 2 ++ kernel/sched.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 717cab8a0c83..6e26f1fdbfe2 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2237,6 +2237,8 @@ static inline void mm_init_owner(struct mm_struct *mm, struct task_struct *p) } #endif /* CONFIG_MM_OWNER */ +#define TASK_STATE_TO_CHAR_STR "RSDTtZX" + #endif /* __KERNEL__ */ #endif diff --git a/kernel/sched.c b/kernel/sched.c index 463dcdb36ef8..73e600852365 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5729,7 +5729,7 @@ out_unlock: return retval; } -static const char stat_nam[] = "RSDTtZX"; +static const char stat_nam[] = TASK_STATE_TO_CHAR_STR; void sched_show_task(struct task_struct *p) { -- cgit v1.2.3 From 502825282e6f79c975a644afc124432ec1744de4 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:41 +0200 Subject: ftrace: add preempt_enable/disable notrace macros The tracer may need to call preempt_enable and disable functions for time keeping and such. The trace gets ugly when we see these functions show up for all traces. To make the output cleaner this patch adds preempt_enable_notrace and preempt_disable_notrace to be used by tracer (and debugging) functions. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/preempt.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/include/linux/preempt.h b/include/linux/preempt.h index 23f0c54175cd..36b03d50bf40 100644 --- a/include/linux/preempt.h +++ b/include/linux/preempt.h @@ -52,6 +52,34 @@ do { \ preempt_check_resched(); \ } while (0) +/* For debugging and tracer internals only! */ +#define add_preempt_count_notrace(val) \ + do { preempt_count() += (val); } while (0) +#define sub_preempt_count_notrace(val) \ + do { preempt_count() -= (val); } while (0) +#define inc_preempt_count_notrace() add_preempt_count_notrace(1) +#define dec_preempt_count_notrace() sub_preempt_count_notrace(1) + +#define preempt_disable_notrace() \ +do { \ + inc_preempt_count_notrace(); \ + barrier(); \ +} while (0) + +#define preempt_enable_no_resched_notrace() \ +do { \ + barrier(); \ + dec_preempt_count_notrace(); \ +} while (0) + +/* preempt_check_resched is OK to trace */ +#define preempt_enable_notrace() \ +do { \ + preempt_enable_no_resched_notrace(); \ + barrier(); \ + preempt_check_resched(); \ +} while (0) + #else #define preempt_disable() do { } while (0) @@ -59,6 +87,10 @@ do { \ #define preempt_enable() do { } while (0) #define preempt_check_resched() do { } while (0) +#define preempt_disable_notrace() do { } while (0) +#define preempt_enable_no_resched_notrace() do { } while (0) +#define preempt_enable_notrace() do { } while (0) + #endif #ifdef CONFIG_PREEMPT_NOTIFIERS -- cgit v1.2.3 From ffdc1a09ae7e2cbd714a446ee38a27f625b5f1c8 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:41 +0200 Subject: tracing: add notrace to linkage.h notrace signals that a function should not be traced. Most of the time this is used by tracers to annotate code that cannot be traced - it's in a volatile state (such as in user vdso context or NMI context) or it's in the tracer internals. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/linkage.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/linux/linkage.h b/include/linux/linkage.h index 2119610b24f8..14f329c64ba8 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -3,6 +3,8 @@ #include +#define notrace __attribute__((no_instrument_function)) + #ifdef __cplusplus #define CPP_ASMLINKAGE extern "C" #else -- cgit v1.2.3 From 23adec554a7648f99c8acc0caf49c66320cd2b84 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:41 +0200 Subject: x86: add notrace annotations to vsyscall. Add the notrace annotations to the vsyscall functions - there we are not in kernel context yet, so the tracer function cannot (and must not) be called. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/vsyscall_64.c | 3 ++- arch/x86/vdso/vclock_gettime.c | 15 ++++++++------- arch/x86/vdso/vgetcpu.c | 3 ++- include/asm-x86/vsyscall.h | 3 ++- 4 files changed, 14 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index 61efa2f7d564..4063dfa2a02d 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -42,7 +42,8 @@ #include #include -#define __vsyscall(nr) __attribute__ ((unused,__section__(".vsyscall_" #nr))) +#define __vsyscall(nr) \ + __attribute__ ((unused, __section__(".vsyscall_" #nr))) notrace #define __syscall_clobber "r11","cx","memory" /* diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c index 23476c2ebfc4..5cb8f754c52d 100644 --- a/arch/x86/vdso/vclock_gettime.c +++ b/arch/x86/vdso/vclock_gettime.c @@ -23,7 +23,7 @@ #define gtod vdso_vsyscall_gtod_data -static long vdso_fallback_gettime(long clock, struct timespec *ts) +notrace static long vdso_fallback_gettime(long clock, struct timespec *ts) { long ret; asm("syscall" : "=a" (ret) : @@ -31,7 +31,7 @@ static long vdso_fallback_gettime(long clock, struct timespec *ts) return ret; } -static inline long vgetns(void) +notrace static inline long vgetns(void) { long v; cycles_t (*vread)(void); @@ -40,7 +40,7 @@ static inline long vgetns(void) return (v * gtod->clock.mult) >> gtod->clock.shift; } -static noinline int do_realtime(struct timespec *ts) +notrace static noinline int do_realtime(struct timespec *ts) { unsigned long seq, ns; do { @@ -54,7 +54,8 @@ static noinline int do_realtime(struct timespec *ts) } /* Copy of the version in kernel/time.c which we cannot directly access */ -static void vset_normalized_timespec(struct timespec *ts, long sec, long nsec) +notrace static void +vset_normalized_timespec(struct timespec *ts, long sec, long nsec) { while (nsec >= NSEC_PER_SEC) { nsec -= NSEC_PER_SEC; @@ -68,7 +69,7 @@ static void vset_normalized_timespec(struct timespec *ts, long sec, long nsec) ts->tv_nsec = nsec; } -static noinline int do_monotonic(struct timespec *ts) +notrace static noinline int do_monotonic(struct timespec *ts) { unsigned long seq, ns, secs; do { @@ -82,7 +83,7 @@ static noinline int do_monotonic(struct timespec *ts) return 0; } -int __vdso_clock_gettime(clockid_t clock, struct timespec *ts) +notrace int __vdso_clock_gettime(clockid_t clock, struct timespec *ts) { if (likely(gtod->sysctl_enabled && gtod->clock.vread)) switch (clock) { @@ -96,7 +97,7 @@ int __vdso_clock_gettime(clockid_t clock, struct timespec *ts) int clock_gettime(clockid_t, struct timespec *) __attribute__((weak, alias("__vdso_clock_gettime"))); -int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) +notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) { long ret; if (likely(gtod->sysctl_enabled && gtod->clock.vread)) { diff --git a/arch/x86/vdso/vgetcpu.c b/arch/x86/vdso/vgetcpu.c index c8097f17f8a9..9fbc6b20026b 100644 --- a/arch/x86/vdso/vgetcpu.c +++ b/arch/x86/vdso/vgetcpu.c @@ -13,7 +13,8 @@ #include #include "vextern.h" -long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused) +notrace long +__vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused) { unsigned int p; diff --git a/include/asm-x86/vsyscall.h b/include/asm-x86/vsyscall.h index 17b3700949bf..6b66ff905af0 100644 --- a/include/asm-x86/vsyscall.h +++ b/include/asm-x86/vsyscall.h @@ -24,7 +24,8 @@ enum vsyscall_num { ((unused, __section__ (".vsyscall_gtod_data"),aligned(16))) #define __section_vsyscall_clock __attribute__ \ ((unused, __section__ (".vsyscall_clock"),aligned(16))) -#define __vsyscall_fn __attribute__ ((unused,__section__(".vsyscall_fn"))) +#define __vsyscall_fn \ + __attribute__ ((unused, __section__(".vsyscall_fn"))) notrace #define VGETCPU_RDTSCP 1 #define VGETCPU_LSL 2 -- cgit v1.2.3 From 6e766410c4babd37bc7cd5e25009c179781742c8 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 12 May 2008 21:20:41 +0200 Subject: ftrace: annotate core code that should not be traced Mark with "notrace" functions in core code that should not be traced. The "notrace" attribute will prevent gcc from adding a call to ftrace on the annotated funtions. Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- lib/smp_processor_id.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/smp_processor_id.c b/lib/smp_processor_id.c index 6c90fb90e19c..e555ab62fbad 100644 --- a/lib/smp_processor_id.c +++ b/lib/smp_processor_id.c @@ -7,7 +7,7 @@ #include #include -unsigned int debug_smp_processor_id(void) +notrace unsigned int debug_smp_processor_id(void) { unsigned long preempt_count = preempt_count(); int this_cpu = raw_smp_processor_id(); -- cgit v1.2.3 From 16444a8a40d4c7b4f6de34af0cae1f76a4f6c901 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Mon, 12 May 2008 21:20:42 +0200 Subject: ftrace: add basic support for gcc profiler instrumentation If CONFIG_FTRACE is selected and /proc/sys/kernel/ftrace_enabled is set to a non-zero value the ftrace routine will be called everytime we enter a kernel function that is not marked with the "notrace" attribute. The ftrace routine will then call a registered function if a function happens to be registered. [ This code has been highly hacked by Steven Rostedt and Ingo Molnar, so don't blame Arnaldo for all of this ;-) ] Update: It is now possible to register more than one ftrace function. If only one ftrace function is registered, that will be the function that ftrace calls directly. If more than one function is registered, then ftrace will call a function that will loop through the functions to call. Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- Makefile | 4 ++ arch/x86/Kconfig | 1 + arch/x86/kernel/entry_32.S | 27 +++++++++ arch/x86/kernel/entry_64.S | 37 ++++++++++++ include/linux/ftrace.h | 38 +++++++++++++ kernel/Makefile | 1 + kernel/trace/Kconfig | 5 ++ kernel/trace/Makefile | 3 + kernel/trace/ftrace.c | 138 +++++++++++++++++++++++++++++++++++++++++++++ lib/Kconfig.debug | 2 + 10 files changed, 256 insertions(+) create mode 100644 include/linux/ftrace.h create mode 100644 kernel/trace/Kconfig create mode 100644 kernel/trace/Makefile create mode 100644 kernel/trace/ftrace.c diff --git a/Makefile b/Makefile index 20b32351906b..b4a273f19b52 100644 --- a/Makefile +++ b/Makefile @@ -528,6 +528,10 @@ KBUILD_CFLAGS += -g KBUILD_AFLAGS += -gdwarf-2 endif +ifdef CONFIG_FTRACE +KBUILD_CFLAGS += -pg +endif + # We trigger additional mismatches with less inlining ifdef CONFIG_DEBUG_SECTION_MISMATCH KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fe361ae7ef2f..c742dfeb0dbe 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -23,6 +23,7 @@ config X86 select HAVE_OPROFILE select HAVE_KPROBES select HAVE_KRETPROBES + select HAVE_FTRACE select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64) select HAVE_ARCH_KGDB if !X86_VOYAGER diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 2a609dc3271c..f47b9b5440d2 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -1109,6 +1109,33 @@ ENDPROC(xen_failsafe_callback) #endif /* CONFIG_XEN */ +#ifdef CONFIG_FTRACE +ENTRY(mcount) + cmpl $ftrace_stub, ftrace_trace_function + jnz trace + +.globl ftrace_stub +ftrace_stub: + ret + + /* taken from glibc */ +trace: + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %eax + movl 0x4(%ebp), %edx + + call *ftrace_trace_function + + popl %edx + popl %ecx + popl %eax + + jmp ftrace_stub +END(mcount) +#endif + .section .rodata,"a" #include "syscall_table_32.S" diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 556a8df522a7..f046e0c64883 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -54,6 +54,43 @@ .code64 +#ifdef CONFIG_FTRACE +ENTRY(mcount) + cmpq $ftrace_stub, ftrace_trace_function + jnz trace +.globl ftrace_stub +ftrace_stub: + retq + +trace: + /* taken from glibc */ + subq $0x38, %rsp + movq %rax, (%rsp) + movq %rcx, 8(%rsp) + movq %rdx, 16(%rsp) + movq %rsi, 24(%rsp) + movq %rdi, 32(%rsp) + movq %r8, 40(%rsp) + movq %r9, 48(%rsp) + + movq 0x38(%rsp), %rdi + movq 8(%rbp), %rsi + + call *ftrace_trace_function + + movq 48(%rsp), %r9 + movq 40(%rsp), %r8 + movq 32(%rsp), %rdi + movq 24(%rsp), %rsi + movq 16(%rsp), %rdx + movq 8(%rsp), %rcx + movq (%rsp), %rax + addq $0x38, %rsp + + jmp ftrace_stub +END(mcount) +#endif + #ifndef CONFIG_PREEMPT #define retint_kernel retint_restore_args #endif diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h new file mode 100644 index 000000000000..b96ef14c249a --- /dev/null +++ b/include/linux/ftrace.h @@ -0,0 +1,38 @@ +#ifndef _LINUX_FTRACE_H +#define _LINUX_FTRACE_H + +#ifdef CONFIG_FTRACE + +#include + +#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) +#define CALLER_ADDR1 ((unsigned long)__builtin_return_address(1)) +#define CALLER_ADDR2 ((unsigned long)__builtin_return_address(2)) + +typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip); + +struct ftrace_ops { + ftrace_func_t func; + struct ftrace_ops *next; +}; + +/* + * The ftrace_ops must be a static and should also + * be read_mostly. These functions do modify read_mostly variables + * so use them sparely. Never free an ftrace_op or modify the + * next pointer after it has been registered. Even after unregistering + * it, the next pointer may still be used internally. + */ +int register_ftrace_function(struct ftrace_ops *ops); +int unregister_ftrace_function(struct ftrace_ops *ops); +void clear_ftrace_function(void); + +extern void ftrace_stub(unsigned long a0, unsigned long a1); +extern void mcount(void); + +#else /* !CONFIG_FTRACE */ +# define register_ftrace_function(ops) do { } while (0) +# define unregister_ftrace_function(ops) do { } while (0) +# define clear_ftrace_function(ops) do { } while (0) +#endif /* CONFIG_FTRACE */ +#endif /* _LINUX_FTRACE_H */ diff --git a/kernel/Makefile b/kernel/Makefile index 1c9938addb9d..fa05f6d8bdbf 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o obj-$(CONFIG_TASKSTATS) += taskstats.o tsacct.o obj-$(CONFIG_MARKERS) += marker.o obj-$(CONFIG_LATENCYTOP) += latencytop.o +obj-$(CONFIG_FTRACE) += trace/ ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y) # According to Alan Modra , the -fno-omit-frame-pointer is diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig new file mode 100644 index 000000000000..8185c91417bc --- /dev/null +++ b/kernel/trace/Kconfig @@ -0,0 +1,5 @@ +# +# Architectures that offer an FTRACE implementation should select HAVE_FTRACE: +# +config HAVE_FTRACE + bool diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile new file mode 100644 index 000000000000..bf4fd215a6a9 --- /dev/null +++ b/kernel/trace/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_FTRACE) += libftrace.o + +libftrace-y := ftrace.o diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c new file mode 100644 index 000000000000..b6a80b98a3fb --- /dev/null +++ b/kernel/trace/ftrace.c @@ -0,0 +1,138 @@ +/* + * Infrastructure for profiling code inserted by 'gcc -pg'. + * + * Copyright (C) 2007-2008 Steven Rostedt + * Copyright (C) 2004-2008 Ingo Molnar + * + * Originally ported from the -rt patch by: + * Copyright (C) 2007 Arnaldo Carvalho de Melo + * + * Based on code in the latency_tracer, that is: + * + * Copyright (C) 2004-2006 Ingo Molnar + * Copyright (C) 2004 William Lee Irwin III + */ + +#include +#include + +static DEFINE_SPINLOCK(ftrace_func_lock); +static struct ftrace_ops ftrace_list_end __read_mostly = +{ + .func = ftrace_stub, +}; + +static struct ftrace_ops *ftrace_list __read_mostly = &ftrace_list_end; +ftrace_func_t ftrace_trace_function __read_mostly = ftrace_stub; + +/* mcount is defined per arch in assembly */ +EXPORT_SYMBOL(mcount); + +notrace void ftrace_list_func(unsigned long ip, unsigned long parent_ip) +{ + struct ftrace_ops *op = ftrace_list; + + /* in case someone actually ports this to alpha! */ + read_barrier_depends(); + + while (op != &ftrace_list_end) { + /* silly alpha */ + read_barrier_depends(); + op->func(ip, parent_ip); + op = op->next; + }; +} + +/** + * register_ftrace_function - register a function for profiling + * @ops - ops structure that holds the function for profiling. + * + * Register a function to be called by all functions in the + * kernel. + * + * Note: @ops->func and all the functions it calls must be labeled + * with "notrace", otherwise it will go into a + * recursive loop. + */ +int register_ftrace_function(struct ftrace_ops *ops) +{ + unsigned long flags; + + spin_lock_irqsave(&ftrace_func_lock, flags); + ops->next = ftrace_list; + /* + * We are entering ops into the ftrace_list but another + * CPU might be walking that list. We need to make sure + * the ops->next pointer is valid before another CPU sees + * the ops pointer included into the ftrace_list. + */ + smp_wmb(); + ftrace_list = ops; + /* + * For one func, simply call it directly. + * For more than one func, call the chain. + */ + if (ops->next == &ftrace_list_end) + ftrace_trace_function = ops->func; + else + ftrace_trace_function = ftrace_list_func; + spin_unlock_irqrestore(&ftrace_func_lock, flags); + + return 0; +} + +/** + * unregister_ftrace_function - unresgister a function for profiling. + * @ops - ops structure that holds the function to unregister + * + * Unregister a function that was added to be called by ftrace profiling. + */ +int unregister_ftrace_function(struct ftrace_ops *ops) +{ + unsigned long flags; + struct ftrace_ops **p; + int ret = 0; + + spin_lock_irqsave(&ftrace_func_lock, flags); + + /* + * If we are the only function, then the ftrace pointer is + * pointing directly to that function. + */ + if (ftrace_list == ops && ops->next == &ftrace_list_end) { + ftrace_trace_function = ftrace_stub; + ftrace_list = &ftrace_list_end; + goto out; + } + + for (p = &ftrace_list; *p != &ftrace_list_end; p = &(*p)->next) + if (*p == ops) + break; + + if (*p != ops) { + ret = -1; + goto out; + } + + *p = (*p)->next; + + /* If we only have one func left, then call that directly */ + if (ftrace_list->next == &ftrace_list_end) + ftrace_trace_function = ftrace_list->func; + + out: + spin_unlock_irqrestore(&ftrace_func_lock, flags); + + return 0; +} + +/** + * clear_ftrace_function - reset the ftrace function + * + * This NULLs the ftrace function and in essence stops + * tracing. There may be lag + */ +void clear_ftrace_function(void) +{ + ftrace_trace_function = ftrace_stub; +} diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index d2099f41aa1e..d8b6279a9b42 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -634,6 +634,8 @@ config LATENCYTOP Enable this option if you want to use the LatencyTOP tool to find out which userspace is blocking on what kernel operations. +source kernel/trace/Kconfig + config PROVIDE_OHCI1394_DMA_INIT bool "Remote debugging over FireWire early on boot" depends on PCI && X86 -- cgit v1.2.3 From bc0c38d139ec7fcd5c030aea16b008f3732e42ac Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:42 +0200 Subject: ftrace: latency tracer infrastructure This patch adds the latency tracer infrastructure. This patch does not add anything that will select and turn it on, but will be used by later patches. If it were to be compiled, it would add the following files to the debugfs: The root tracing directory: /debugfs/tracing/ This patch also adds the following files: available_tracers list of available tracers. Currently no tracers are available. Looking into this file only shows "none" which is used to unregister all tracers. current_tracer The trace that is currently active. Empty on start up. To switch to a tracer simply echo one of the tracers that are listed in available_tracers: example: (used with later patches) echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer tracing_enabled echoing "1" into this file starts the ftrace function tracing (if sysctl kernel.ftrace_enabled=1) echoing "0" turns it off. latency_trace This file is readonly and holds the result of the trace. trace This file outputs a easier to read version of the trace. iter_ctrl Controls the way the output of traces look. So far there's two controls: echoing in "symonly" will only show the kallsyms variables without the addresses (if kallsyms was configured) echoing in "verbose" will change the output to show a lot more data, but not very easy to understand by humans. echoing in "nosymonly" turns off symonly. echoing in "noverbose" turns off verbose. Signed-off-by: Steven Rostedt Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/Makefile | 1 + kernel/trace/Kconfig | 5 + kernel/trace/Makefile | 2 + kernel/trace/trace.c | 1547 +++++++++++++++++++++++++++++++++++++++++++++++++ kernel/trace/trace.h | 184 ++++++ 5 files changed, 1739 insertions(+) create mode 100644 kernel/trace/trace.c create mode 100644 kernel/trace/trace.h diff --git a/kernel/Makefile b/kernel/Makefile index fa05f6d8bdbf..7e344e7b0cb3 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -70,6 +70,7 @@ obj-$(CONFIG_TASKSTATS) += taskstats.o tsacct.o obj-$(CONFIG_MARKERS) += marker.o obj-$(CONFIG_LATENCYTOP) += latencytop.o obj-$(CONFIG_FTRACE) += trace/ +obj-$(CONFIG_TRACING) += trace/ ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y) # According to Alan Modra , the -fno-omit-frame-pointer is diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 8185c91417bc..ce70677afbf9 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -3,3 +3,8 @@ # config HAVE_FTRACE bool + +config TRACING + bool + select DEBUG_FS + diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index bf4fd215a6a9..7af403175255 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -1,3 +1,5 @@ obj-$(CONFIG_FTRACE) += libftrace.o +obj-$(CONFIG_TRACING) += trace.o + libftrace-y := ftrace.o diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c new file mode 100644 index 000000000000..1b8eca7650d4 --- /dev/null +++ b/kernel/trace/trace.c @@ -0,0 +1,1547 @@ +/* + * ring buffer based function tracer + * + * Copyright (C) 2007-2008 Steven Rostedt + * Copyright (C) 2008 Ingo Molnar + * + * Originally taken from the RT patch by: + * Arnaldo Carvalho de Melo + * + * Based on code from the latency_tracer, that is: + * Copyright (C) 2004-2006 Ingo Molnar + * Copyright (C) 2004 William Lee Irwin III + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "trace.h" + +unsigned long __read_mostly tracing_max_latency = (cycle_t)ULONG_MAX; +unsigned long __read_mostly tracing_thresh; + +static long notrace +ns2usecs(cycle_t nsec) +{ + nsec += 500; + do_div(nsec, 1000); + return nsec; +} + +static atomic_t tracer_counter; +static struct trace_array global_trace; + +static DEFINE_PER_CPU(struct trace_array_cpu, global_trace_cpu); + +static struct trace_array max_tr; + +static DEFINE_PER_CPU(struct trace_array_cpu, max_data); + +static int tracer_enabled; +static unsigned long trace_nr_entries = 4096UL; + +static struct tracer *trace_types __read_mostly; +static struct tracer *current_trace __read_mostly; +static int max_tracer_type_len; + +static DEFINE_MUTEX(trace_types_lock); + +static int __init set_nr_entries(char *str) +{ + if (!str) + return 0; + trace_nr_entries = simple_strtoul(str, &str, 0); + return 1; +} +__setup("trace_entries=", set_nr_entries); + +enum trace_type { + __TRACE_FIRST_TYPE = 0, + + TRACE_FN, + TRACE_CTX, + + __TRACE_LAST_TYPE +}; + +enum trace_flag_type { + TRACE_FLAG_IRQS_OFF = 0x01, + TRACE_FLAG_NEED_RESCHED = 0x02, + TRACE_FLAG_HARDIRQ = 0x04, + TRACE_FLAG_SOFTIRQ = 0x08, +}; + +enum trace_iterator_flags { + TRACE_ITER_PRINT_PARENT = 0x01, + TRACE_ITER_SYM_OFFSET = 0x02, + TRACE_ITER_SYM_ADDR = 0x04, + TRACE_ITER_VERBOSE = 0x08, +}; + +#define TRACE_ITER_SYM_MASK \ + (TRACE_ITER_PRINT_PARENT|TRACE_ITER_SYM_OFFSET|TRACE_ITER_SYM_ADDR) + +/* These must match the bit postions above */ +static const char *trace_options[] = { + "print-parent", + "sym-offset", + "sym-addr", + "verbose", + NULL +}; + +static unsigned trace_flags; + + +/* + * Copy the new maximum trace into the separate maximum-trace + * structure. (this way the maximum trace is permanently saved, + * for later retrieval via /debugfs/tracing/latency_trace) + */ +static void notrace +__update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) +{ + struct trace_array_cpu *data = tr->data[cpu]; + + max_tr.cpu = cpu; + max_tr.time_start = data->preempt_timestamp; + + data = max_tr.data[cpu]; + data->saved_latency = tracing_max_latency; + + memcpy(data->comm, tsk->comm, TASK_COMM_LEN); + data->pid = tsk->pid; + data->uid = tsk->uid; + data->nice = tsk->static_prio - 20 - MAX_RT_PRIO; + data->policy = tsk->policy; + data->rt_priority = tsk->rt_priority; + + /* record this tasks comm */ + tracing_record_cmdline(current); +} + +notrace void +update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) +{ + struct trace_array_cpu *data; + void *save_trace; + int i; + + /* clear out all the previous traces */ + for_each_possible_cpu(i) { + data = tr->data[i]; + save_trace = max_tr.data[i]->trace; + memcpy(max_tr.data[i], data, sizeof(*data)); + data->trace = save_trace; + } + + __update_max_tr(tr, tsk, cpu); +} + +/** + * update_max_tr_single - only copy one trace over, and reset the rest + * @tr - tracer + * @tsk - task with the latency + * @cpu - the cpu of the buffer to copy. + */ +notrace void +update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu) +{ + struct trace_array_cpu *data = tr->data[cpu]; + void *save_trace; + int i; + + for_each_possible_cpu(i) + tracing_reset(max_tr.data[i]); + + save_trace = max_tr.data[cpu]->trace; + memcpy(max_tr.data[cpu], data, sizeof(*data)); + data->trace = save_trace; + + __update_max_tr(tr, tsk, cpu); +} + +int register_tracer(struct tracer *type) +{ + struct tracer *t; + int len; + int ret = 0; + + if (!type->name) { + pr_info("Tracer must have a name\n"); + return -1; + } + + mutex_lock(&trace_types_lock); + for (t = trace_types; t; t = t->next) { + if (strcmp(type->name, t->name) == 0) { + /* already found */ + pr_info("Trace %s already registered\n", + type->name); + ret = -1; + goto out; + } + } + + type->next = trace_types; + trace_types = type; + len = strlen(type->name); + if (len > max_tracer_type_len) + max_tracer_type_len = len; + out: + mutex_unlock(&trace_types_lock); + + return ret; +} + +void unregister_tracer(struct tracer *type) +{ + struct tracer **t; + int len; + + mutex_lock(&trace_types_lock); + for (t = &trace_types; *t; t = &(*t)->next) { + if (*t == type) + goto found; + } + pr_info("Trace %s not registered\n", type->name); + goto out; + + found: + *t = (*t)->next; + if (strlen(type->name) != max_tracer_type_len) + goto out; + + max_tracer_type_len = 0; + for (t = &trace_types; *t; t = &(*t)->next) { + len = strlen((*t)->name); + if (len > max_tracer_type_len) + max_tracer_type_len = len; + } + out: + mutex_unlock(&trace_types_lock); +} + +void notrace tracing_reset(struct trace_array_cpu *data) +{ + data->trace_idx = 0; + atomic_set(&data->underrun, 0); +} + +#ifdef CONFIG_FTRACE +static void notrace +function_trace_call(unsigned long ip, unsigned long parent_ip) +{ + struct trace_array *tr = &global_trace; + struct trace_array_cpu *data; + unsigned long flags; + long disabled; + int cpu; + + if (unlikely(!tracer_enabled)) + return; + + raw_local_irq_save(flags); + cpu = raw_smp_processor_id(); + data = tr->data[cpu]; + disabled = atomic_inc_return(&data->disabled); + + if (likely(disabled == 1)) + ftrace(tr, data, ip, parent_ip, flags); + + atomic_dec(&data->disabled); + raw_local_irq_restore(flags); +} + +static struct ftrace_ops trace_ops __read_mostly = +{ + .func = function_trace_call, +}; +#endif + +notrace void tracing_start_function_trace(void) +{ + register_ftrace_function(&trace_ops); +} + +notrace void tracing_stop_function_trace(void) +{ + unregister_ftrace_function(&trace_ops); +} + +#define SAVED_CMDLINES 128 +static unsigned map_pid_to_cmdline[PID_MAX_DEFAULT+1]; +static unsigned map_cmdline_to_pid[SAVED_CMDLINES]; +static char saved_cmdlines[SAVED_CMDLINES][TASK_COMM_LEN]; +static int cmdline_idx; +static DEFINE_SPINLOCK(trace_cmdline_lock); +atomic_t trace_record_cmdline_disabled; + +static void trace_init_cmdlines(void) +{ + memset(&map_pid_to_cmdline, -1, sizeof(map_pid_to_cmdline)); + memset(&map_cmdline_to_pid, -1, sizeof(map_cmdline_to_pid)); + cmdline_idx = 0; +} + +notrace void trace_stop_cmdline_recording(void); + +static void notrace trace_save_cmdline(struct task_struct *tsk) +{ + unsigned map; + unsigned idx; + + if (!tsk->pid || unlikely(tsk->pid > PID_MAX_DEFAULT)) + return; + + /* + * It's not the end of the world if we don't get + * the lock, but we also don't want to spin + * nor do we want to disable interrupts, + * so if we miss here, then better luck next time. + */ + if (!spin_trylock(&trace_cmdline_lock)) + return; + + idx = map_pid_to_cmdline[tsk->pid]; + if (idx >= SAVED_CMDLINES) { + idx = (cmdline_idx + 1) % SAVED_CMDLINES; + + map = map_cmdline_to_pid[idx]; + if (map <= PID_MAX_DEFAULT) + map_pid_to_cmdline[map] = (unsigned)-1; + + map_pid_to_cmdline[tsk->pid] = idx; + + cmdline_idx = idx; + } + + memcpy(&saved_cmdlines[idx], tsk->comm, TASK_COMM_LEN); + + spin_unlock(&trace_cmdline_lock); +} + +static notrace char *trace_find_cmdline(int pid) +{ + char *cmdline = "<...>"; + unsigned map; + + if (!pid) + return ""; + + if (pid > PID_MAX_DEFAULT) + goto out; + + map = map_pid_to_cmdline[pid]; + if (map >= SAVED_CMDLINES) + goto out; + + cmdline = saved_cmdlines[map]; + + out: + return cmdline; +} + +notrace void tracing_record_cmdline(struct task_struct *tsk) +{ + if (atomic_read(&trace_record_cmdline_disabled)) + return; + + trace_save_cmdline(tsk); +} + +static inline notrace struct trace_entry * +tracing_get_trace_entry(struct trace_array *tr, + struct trace_array_cpu *data) +{ + unsigned long idx, idx_next; + struct trace_entry *entry; + + idx = data->trace_idx; + idx_next = idx + 1; + + if (unlikely(idx_next >= tr->entries)) { + atomic_inc(&data->underrun); + idx_next = 0; + } + + data->trace_idx = idx_next; + + if (unlikely(idx_next != 0 && atomic_read(&data->underrun))) + atomic_inc(&data->underrun); + + entry = data->trace + idx * TRACE_ENTRY_SIZE; + + return entry; +} + +static inline notrace void +tracing_generic_entry_update(struct trace_entry *entry, + unsigned long flags) +{ + struct task_struct *tsk = current; + unsigned long pc; + + pc = preempt_count(); + + entry->idx = atomic_inc_return(&tracer_counter); + entry->preempt_count = pc & 0xff; + entry->pid = tsk->pid; + entry->t = now(raw_smp_processor_id()); + entry->flags = (irqs_disabled_flags(flags) ? TRACE_FLAG_IRQS_OFF : 0) | + ((pc & HARDIRQ_MASK) ? TRACE_FLAG_HARDIRQ : 0) | + ((pc & SOFTIRQ_MASK) ? TRACE_FLAG_SOFTIRQ : 0) | + (need_resched() ? TRACE_FLAG_NEED_RESCHED : 0); +} + +notrace void +ftrace(struct trace_array *tr, struct trace_array_cpu *data, + unsigned long ip, unsigned long parent_ip, + unsigned long flags) +{ + struct trace_entry *entry; + + entry = tracing_get_trace_entry(tr, data); + tracing_generic_entry_update(entry, flags); + entry->type = TRACE_FN; + entry->fn.ip = ip; + entry->fn.parent_ip = parent_ip; +} + +notrace void +tracing_sched_switch_trace(struct trace_array *tr, + struct trace_array_cpu *data, + struct task_struct *prev, struct task_struct *next, + unsigned long flags) +{ + struct trace_entry *entry; + + entry = tracing_get_trace_entry(tr, data); + tracing_generic_entry_update(entry, flags); + entry->type = TRACE_CTX; + entry->ctx.prev_pid = prev->pid; + entry->ctx.prev_prio = prev->prio; + entry->ctx.prev_state = prev->state; + entry->ctx.next_pid = next->pid; + entry->ctx.next_prio = next->prio; +} + +enum trace_file_type { + TRACE_FILE_LAT_FMT = 1, +}; + +static struct trace_entry * +trace_entry_idx(struct trace_array *tr, unsigned long idx, int cpu) +{ + struct trace_entry *array = tr->data[cpu]->trace; + unsigned long underrun; + + if (idx >= tr->entries) + return NULL; + + underrun = atomic_read(&tr->data[cpu]->underrun); + if (underrun) + idx = ((underrun - 1) + idx) % tr->entries; + else if (idx >= tr->data[cpu]->trace_idx) + return NULL; + + return &array[idx]; +} + +static struct notrace trace_entry * +find_next_entry(struct trace_iterator *iter, int *ent_cpu) +{ + struct trace_array *tr = iter->tr; + struct trace_entry *ent, *next = NULL; + int next_cpu = -1; + int cpu; + + for_each_possible_cpu(cpu) { + if (!tr->data[cpu]->trace) + continue; + ent = trace_entry_idx(tr, iter->next_idx[cpu], cpu); + if (ent && + (!next || (long)(next->idx - ent->idx) > 0)) { + next = ent; + next_cpu = cpu; + } + } + + if (ent_cpu) + *ent_cpu = next_cpu; + + return next; +} + +static void *find_next_entry_inc(struct trace_iterator *iter) +{ + struct trace_entry *next; + int next_cpu = -1; + + next = find_next_entry(iter, &next_cpu); + + if (next) { + iter->next_idx[next_cpu]++; + iter->idx++; + } + iter->ent = next; + iter->cpu = next_cpu; + + return next ? iter : NULL; +} + +static void notrace * +s_next(struct seq_file *m, void *v, loff_t *pos) +{ + struct trace_iterator *iter = m->private; + void *ent; + void *last_ent = iter->ent; + int i = (int)*pos; + + (*pos)++; + + /* can't go backwards */ + if (iter->idx > i) + return NULL; + + if (iter->idx < 0) + ent = find_next_entry_inc(iter); + else + ent = iter; + + while (ent && iter->idx < i) + ent = find_next_entry_inc(iter); + + iter->pos = *pos; + + if (last_ent && !ent) + seq_puts(m, "\n\nvim:ft=help\n"); + + return ent; +} + +static void *s_start(struct seq_file *m, loff_t *pos) +{ + struct trace_iterator *iter = m->private; + void *p = NULL; + loff_t l = 0; + int i; + + mutex_lock(&trace_types_lock); + + if (!current_trace || current_trace != iter->trace) + return NULL; + + atomic_inc(&trace_record_cmdline_disabled); + + /* let the tracer grab locks here if needed */ + if (current_trace->start) + current_trace->start(iter); + + if (*pos != iter->pos) { + iter->ent = NULL; + iter->cpu = 0; + iter->idx = -1; + + for (i = 0; i < NR_CPUS; i++) + iter->next_idx[i] = 0; + + for (p = iter; p && l < *pos; p = s_next(m, p, &l)) + ; + + } else { + l = *pos; + p = s_next(m, p, &l); + } + + return p; +} + +static void s_stop(struct seq_file *m, void *p) +{ + struct trace_iterator *iter = m->private; + + atomic_dec(&trace_record_cmdline_disabled); + + /* let the tracer release locks here if needed */ + if (current_trace && current_trace == iter->trace && iter->trace->stop) + iter->trace->stop(iter); + + mutex_unlock(&trace_types_lock); +} + +static void +seq_print_sym_short(struct seq_file *m, const char *fmt, unsigned long address) +{ +#ifdef CONFIG_KALLSYMS + char str[KSYM_SYMBOL_LEN]; + + kallsyms_lookup(address, NULL, NULL, NULL, str); + + seq_printf(m, fmt, str); +#endif +} + +static void +seq_print_sym_offset(struct seq_file *m, const char *fmt, unsigned long address) +{ +#ifdef CONFIG_KALLSYMS + char str[KSYM_SYMBOL_LEN]; + + sprint_symbol(str, address); + seq_printf(m, fmt, str); +#endif +} + +#ifndef CONFIG_64BIT +# define IP_FMT "%08lx" +#else +# define IP_FMT "%016lx" +#endif + +static void notrace +seq_print_ip_sym(struct seq_file *m, unsigned long ip, unsigned long sym_flags) +{ + if (!ip) { + seq_printf(m, "0"); + return; + } + + if (sym_flags & TRACE_ITER_SYM_OFFSET) + seq_print_sym_offset(m, "%s", ip); + else + seq_print_sym_short(m, "%s", ip); + + if (sym_flags & TRACE_ITER_SYM_ADDR) + seq_printf(m, " <" IP_FMT ">", ip); +} + +static void notrace print_lat_help_header(struct seq_file *m) +{ + seq_puts(m, "# _------=> CPU# \n"); + seq_puts(m, "# / _-----=> irqs-off \n"); + seq_puts(m, "# | / _----=> need-resched \n"); + seq_puts(m, "# || / _---=> hardirq/softirq \n"); + seq_puts(m, "# ||| / _--=> preempt-depth \n"); + seq_puts(m, "# |||| / \n"); + seq_puts(m, "# ||||| delay \n"); + seq_puts(m, "# cmd pid ||||| time | caller \n"); + seq_puts(m, "# \\ / ||||| \\ | / \n"); +} + +static void notrace print_func_help_header(struct seq_file *m) +{ + seq_puts(m, "# TASK-PID CPU# TIMESTAMP FUNCTION\n"); + seq_puts(m, "# | | | | |\n"); +} + + +static void notrace +print_trace_header(struct seq_file *m, struct trace_iterator *iter) +{ + unsigned long sym_flags = (trace_flags & TRACE_ITER_SYM_MASK); + struct trace_array *tr = iter->tr; + struct trace_array_cpu *data = tr->data[tr->cpu]; + struct tracer *type = current_trace; + unsigned long underruns = 0; + unsigned long underrun; + unsigned long entries = 0; + int cpu; + const char *name = "preemption"; + + if (type) + name = type->name; + + for_each_possible_cpu(cpu) { + if (tr->data[cpu]->trace) { + underrun = atomic_read(&tr->data[cpu]->underrun); + if (underrun) { + underruns += underrun; + entries += tr->entries; + } else + entries += tr->data[cpu]->trace_idx; + } + } + + seq_printf(m, "%s latency trace v1.1.5 on %s\n", + name, UTS_RELEASE); + seq_puts(m, "-----------------------------------" + "---------------------------------\n"); + seq_printf(m, " latency: %lu us, #%lu/%lu, CPU#%d |" + " (M:%s VP:%d, KP:%d, SP:%d HP:%d", + data->saved_latency, + entries, + (entries + underruns), + tr->cpu, +#if defined(CONFIG_PREEMPT_NONE) + "server", +#elif defined(CONFIG_PREEMPT_VOLUNTARY) + "desktop", +#elif defined(CONFIG_PREEMPT_DESKTOP) + "preempt", +#else + "unknown", +#endif + /* These are reserved for later use */ + 0, 0, 0, 0); +#ifdef CONFIG_SMP + seq_printf(m, " #P:%d)\n", num_online_cpus()); +#else + seq_puts(m, ")\n"); +#endif + seq_puts(m, " -----------------\n"); + seq_printf(m, " | task: %.16s-%d " + "(uid:%d nice:%ld policy:%ld rt_prio:%ld)\n", + data->comm, data->pid, data->uid, data->nice, + data->policy, data->rt_priority); + seq_puts(m, " -----------------\n"); + + if (data->critical_start) { + seq_puts(m, " => started at: "); + seq_print_ip_sym(m, data->critical_start, sym_flags); + seq_puts(m, "\n => ended at: "); + seq_print_ip_sym(m, data->critical_end, sym_flags); + seq_puts(m, "\n"); + } + + seq_puts(m, "\n"); +} + +unsigned long nsecs_to_usecs(unsigned long nsecs) +{ + return nsecs / 1000; +} + +static void notrace +lat_print_generic(struct seq_file *m, struct trace_entry *entry, int cpu) +{ + int hardirq, softirq; + char *comm; + + comm = trace_find_cmdline(entry->pid); + + seq_printf(m, "%8.8s-%-5d ", comm, entry->pid); + seq_printf(m, "%d", cpu); + seq_printf(m, "%c%c", + (entry->flags & TRACE_FLAG_IRQS_OFF) ? 'd' : '.', + ((entry->flags & TRACE_FLAG_NEED_RESCHED) ? 'N' : '.')); + + hardirq = entry->flags & TRACE_FLAG_HARDIRQ; + softirq = entry->flags & TRACE_FLAG_SOFTIRQ; + if (hardirq && softirq) + seq_putc(m, 'H'); + else { + if (hardirq) + seq_putc(m, 'h'); + else { + if (softirq) + seq_putc(m, 's'); + else + seq_putc(m, '.'); + } + } + + if (entry->preempt_count) + seq_printf(m, "%x", entry->preempt_count); + else + seq_puts(m, "."); +} + +unsigned long preempt_mark_thresh = 100; + +static void notrace +lat_print_timestamp(struct seq_file *m, unsigned long long abs_usecs, + unsigned long rel_usecs) +{ + seq_printf(m, " %4lldus", abs_usecs); + if (rel_usecs > preempt_mark_thresh) + seq_puts(m, "!: "); + else if (rel_usecs > 1) + seq_puts(m, "+: "); + else + seq_puts(m, " : "); +} + +static const char state_to_char[] = TASK_STATE_TO_CHAR_STR; + +static void notrace +print_lat_fmt(struct seq_file *m, struct trace_iterator *iter, + unsigned int trace_idx, int cpu) +{ + unsigned long sym_flags = (trace_flags & TRACE_ITER_SYM_MASK); + struct trace_entry *next_entry = find_next_entry(iter, NULL); + unsigned long verbose = (trace_flags & TRACE_ITER_VERBOSE); + struct trace_entry *entry = iter->ent; + unsigned long abs_usecs; + unsigned long rel_usecs; + char *comm; + int S; + + if (!next_entry) + next_entry = entry; + rel_usecs = ns2usecs(next_entry->t - entry->t); + abs_usecs = ns2usecs(entry->t - iter->tr->time_start); + + if (verbose) { + comm = trace_find_cmdline(entry->pid); + seq_printf(m, "%16s %5d %d %d %08x %08x [%08lx]" + " %ld.%03ldms (+%ld.%03ldms): ", + comm, + entry->pid, cpu, entry->flags, + entry->preempt_count, trace_idx, + ns2usecs(entry->t), + abs_usecs/1000, + abs_usecs % 1000, rel_usecs/1000, rel_usecs % 1000); + } else { + lat_print_generic(m, entry, cpu); + lat_print_timestamp(m, abs_usecs, rel_usecs); + } + switch (entry->type) { + case TRACE_FN: + seq_print_ip_sym(m, entry->fn.ip, sym_flags); + seq_puts(m, " ("); + seq_print_ip_sym(m, entry->fn.parent_ip, sym_flags); + seq_puts(m, ")\n"); + break; + case TRACE_CTX: + S = entry->ctx.prev_state < sizeof(state_to_char) ? + state_to_char[entry->ctx.prev_state] : 'X'; + comm = trace_find_cmdline(entry->ctx.next_pid); + seq_printf(m, " %d:%d:%c --> %d:%d %s\n", + entry->ctx.prev_pid, + entry->ctx.prev_prio, + S, + entry->ctx.next_pid, + entry->ctx.next_prio, + comm); + break; + } +} + +static void notrace +print_trace_fmt(struct seq_file *m, struct trace_iterator *iter) +{ + unsigned long sym_flags = (trace_flags & TRACE_ITER_SYM_MASK); + struct trace_entry *entry = iter->ent; + unsigned long usec_rem; + unsigned long long t; + unsigned long secs; + char *comm; + int S; + + comm = trace_find_cmdline(iter->ent->pid); + + t = ns2usecs(entry->t); + usec_rem = do_div(t, 1000000ULL); + secs = (unsigned long)t; + + seq_printf(m, "%16s-%-5d ", comm, entry->pid); + seq_printf(m, "[%02d] ", iter->cpu); + seq_printf(m, "%5lu.%06lu: ", secs, usec_rem); + + switch (entry->type) { + case TRACE_FN: + seq_print_ip_sym(m, entry->fn.ip, sym_flags); + if ((sym_flags & TRACE_ITER_PRINT_PARENT) && + entry->fn.parent_ip) { + seq_printf(m, " <-"); + seq_print_ip_sym(m, entry->fn.parent_ip, sym_flags); + } + break; + case TRACE_CTX: + S = entry->ctx.prev_state < sizeof(state_to_char) ? + state_to_char[entry->ctx.prev_state] : 'X'; + seq_printf(m, " %d:%d:%c ==> %d:%d\n", + entry->ctx.prev_pid, + entry->ctx.prev_prio, + S, + entry->ctx.next_pid, + entry->ctx.next_prio); + break; + } + seq_printf(m, "\n"); +} + +static int trace_empty(struct trace_iterator *iter) +{ + struct trace_array_cpu *data; + int cpu; + + for_each_possible_cpu(cpu) { + data = iter->tr->data[cpu]; + + if (data->trace && + (data->trace_idx || + atomic_read(&data->underrun))) + return 0; + } + return 1; +} + +static int s_show(struct seq_file *m, void *v) +{ + struct trace_iterator *iter = v; + + if (iter->ent == NULL) { + if (iter->tr) { + seq_printf(m, "# tracer: %s\n", iter->trace->name); + seq_puts(m, "#\n"); + } + if (iter->iter_flags & TRACE_FILE_LAT_FMT) { + /* print nothing if the buffers are empty */ + if (trace_empty(iter)) + return 0; + print_trace_header(m, iter); + if (!(trace_flags & TRACE_ITER_VERBOSE)) + print_lat_help_header(m); + } else { + if (!(trace_flags & TRACE_ITER_VERBOSE)) + print_func_help_header(m); + } + } else { + if (iter->iter_flags & TRACE_FILE_LAT_FMT) + print_lat_fmt(m, iter, iter->idx, iter->cpu); + else + print_trace_fmt(m, iter); + } + + return 0; +} + +static struct seq_operations tracer_seq_ops = { + .start = s_start, + .next = s_next, + .stop = s_stop, + .show = s_show, +}; + +static struct trace_iterator notrace * +__tracing_open(struct inode *inode, struct file *file, int *ret) +{ + struct trace_iterator *iter; + + iter = kzalloc(sizeof(*iter), GFP_KERNEL); + if (!iter) { + *ret = -ENOMEM; + goto out; + } + + mutex_lock(&trace_types_lock); + if (current_trace && current_trace->print_max) + iter->tr = &max_tr; + else + iter->tr = inode->i_private; + iter->trace = current_trace; + iter->pos = -1; + + /* TODO stop tracer */ + *ret = seq_open(file, &tracer_seq_ops); + if (!*ret) { + struct seq_file *m = file->private_data; + m->private = iter; + + /* stop the trace while dumping */ + if (iter->tr->ctrl) + tracer_enabled = 0; + + if (iter->trace && iter->trace->open) + iter->trace->open(iter); + } else { + kfree(iter); + iter = NULL; + } + mutex_unlock(&trace_types_lock); + + out: + return iter; +} + +int tracing_open_generic(struct inode *inode, struct file *filp) +{ + filp->private_data = inode->i_private; + return 0; +} + +int tracing_release(struct inode *inode, struct file *file) +{ + struct seq_file *m = (struct seq_file *)file->private_data; + struct trace_iterator *iter = m->private; + + mutex_lock(&trace_types_lock); + if (iter->trace && iter->trace->close) + iter->trace->close(iter); + + /* reenable tracing if it was previously enabled */ + if (iter->tr->ctrl) + tracer_enabled = 1; + mutex_unlock(&trace_types_lock); + + seq_release(inode, file); + kfree(iter); + return 0; +} + +static int tracing_open(struct inode *inode, struct file *file) +{ + int ret; + + __tracing_open(inode, file, &ret); + + return ret; +} + +static int tracing_lt_open(struct inode *inode, struct file *file) +{ + struct trace_iterator *iter; + int ret; + + iter = __tracing_open(inode, file, &ret); + + if (!ret) + iter->iter_flags |= TRACE_FILE_LAT_FMT; + + return ret; +} + + +static void notrace * +t_next(struct seq_file *m, void *v, loff_t *pos) +{ + struct tracer *t = m->private; + + (*pos)++; + + if (t) + t = t->next; + + m->private = t; + + return t; +} + +static void *t_start(struct seq_file *m, loff_t *pos) +{ + struct tracer *t = m->private; + loff_t l = 0; + + mutex_lock(&trace_types_lock); + for (; t && l < *pos; t = t_next(m, t, &l)) + ; + + return t; +} + +static void t_stop(struct seq_file *m, void *p) +{ + mutex_unlock(&trace_types_lock); +} + +static int t_show(struct seq_file *m, void *v) +{ + struct tracer *t = v; + + if (!t) + return 0; + + seq_printf(m, "%s", t->name); + if (t->next) + seq_putc(m, ' '); + else + seq_putc(m, '\n'); + + return 0; +} + +static struct seq_operations show_traces_seq_ops = { + .start = t_start, + .next = t_next, + .stop = t_stop, + .show = t_show, +}; + +static int show_traces_open(struct inode *inode, struct file *file) +{ + int ret; + + ret = seq_open(file, &show_traces_seq_ops); + if (!ret) { + struct seq_file *m = file->private_data; + m->private = trace_types; + } + + return ret; +} + +static struct file_operations tracing_fops = { + .open = tracing_open, + .read = seq_read, + .llseek = seq_lseek, + .release = tracing_release, +}; + +static struct file_operations tracing_lt_fops = { + .open = tracing_lt_open, + .read = seq_read, + .llseek = seq_lseek, + .release = tracing_release, +}; + +static struct file_operations show_traces_fops = { + .open = show_traces_open, + .read = seq_read, + .release = seq_release, +}; + +static ssize_t +tracing_iter_ctrl_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char *buf; + int r = 0; + int len = 0; + int i; + + /* calulate max size */ + for (i = 0; trace_options[i]; i++) { + len += strlen(trace_options[i]); + len += 3; /* "no" and space */ + } + + /* +2 for \n and \0 */ + buf = kmalloc(len + 2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + for (i = 0; trace_options[i]; i++) { + if (trace_flags & (1 << i)) + r += sprintf(buf + r, "%s ", trace_options[i]); + else + r += sprintf(buf + r, "no%s ", trace_options[i]); + } + + r += sprintf(buf + r, "\n"); + WARN_ON(r >= len + 2); + + r = simple_read_from_buffer(ubuf, cnt, ppos, + buf, r); + + kfree(buf); + + return r; +} + +static ssize_t +tracing_iter_ctrl_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char buf[64]; + char *cmp = buf; + int neg = 0; + int i; + + if (cnt > 63) + cnt = 63; + + if (copy_from_user(&buf, ubuf, cnt)) + return -EFAULT; + + buf[cnt] = 0; + + if (strncmp(buf, "no", 2) == 0) { + neg = 1; + cmp += 2; + } + + for (i = 0; trace_options[i]; i++) { + int len = strlen(trace_options[i]); + + if (strncmp(cmp, trace_options[i], len) == 0) { + if (neg) + trace_flags &= ~(1 << i); + else + trace_flags |= (1 << i); + break; + } + } + + filp->f_pos += cnt; + + return cnt; +} + +static struct file_operations tracing_iter_fops = { + .open = tracing_open_generic, + .read = tracing_iter_ctrl_read, + .write = tracing_iter_ctrl_write, +}; + +static ssize_t +tracing_ctrl_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + struct trace_array *tr = filp->private_data; + char buf[64]; + int r; + + r = sprintf(buf, "%ld\n", tr->ctrl); + return simple_read_from_buffer(ubuf, cnt, ppos, + buf, r); +} + +static ssize_t +tracing_ctrl_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + struct trace_array *tr = filp->private_data; + long val; + char buf[64]; + + if (cnt > 63) + cnt = 63; + + if (copy_from_user(&buf, ubuf, cnt)) + return -EFAULT; + + buf[cnt] = 0; + + val = simple_strtoul(buf, NULL, 10); + + val = !!val; + + mutex_lock(&trace_types_lock); + if (tr->ctrl ^ val) { + if (val) + tracer_enabled = 1; + else + tracer_enabled = 0; + + tr->ctrl = val; + + if (current_trace && current_trace->ctrl_update) + current_trace->ctrl_update(tr); + } + mutex_unlock(&trace_types_lock); + + filp->f_pos += cnt; + + return cnt; +} + +static ssize_t +tracing_set_trace_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char buf[max_tracer_type_len+2]; + int r; + + mutex_lock(&trace_types_lock); + if (current_trace) + r = sprintf(buf, "%s\n", current_trace->name); + else + r = sprintf(buf, "\n"); + mutex_unlock(&trace_types_lock); + + return simple_read_from_buffer(ubuf, cnt, ppos, + buf, r); +} + +static ssize_t +tracing_set_trace_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + struct trace_array *tr = &global_trace; + struct tracer *t; + char buf[max_tracer_type_len+1]; + int i; + + if (cnt > max_tracer_type_len) + cnt = max_tracer_type_len; + + if (copy_from_user(&buf, ubuf, cnt)) + return -EFAULT; + + buf[cnt] = 0; + + /* strip ending whitespace. */ + for (i = cnt - 1; i > 0 && isspace(buf[i]); i--) + buf[i] = 0; + + mutex_lock(&trace_types_lock); + for (t = trace_types; t; t = t->next) { + if (strcmp(t->name, buf) == 0) + break; + } + if (!t || t == current_trace) + goto out; + + if (current_trace && current_trace->reset) + current_trace->reset(tr); + + current_trace = t; + if (t->init) + t->init(tr); + + out: + mutex_unlock(&trace_types_lock); + + filp->f_pos += cnt; + + return cnt; +} + +static ssize_t +tracing_max_lat_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + unsigned long *ptr = filp->private_data; + char buf[64]; + int r; + + r = snprintf(buf, 64, "%ld\n", + *ptr == (unsigned long)-1 ? -1 : nsecs_to_usecs(*ptr)); + if (r > 64) + r = 64; + return simple_read_from_buffer(ubuf, cnt, ppos, + buf, r); +} + +static ssize_t +tracing_max_lat_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + long *ptr = filp->private_data; + long val; + char buf[64]; + + if (cnt > 63) + cnt = 63; + + if (copy_from_user(&buf, ubuf, cnt)) + return -EFAULT; + + buf[cnt] = 0; + + val = simple_strtoul(buf, NULL, 10); + + *ptr = val * 1000; + + return cnt; +} + +static struct file_operations tracing_max_lat_fops = { + .open = tracing_open_generic, + .read = tracing_max_lat_read, + .write = tracing_max_lat_write, +}; + +static struct file_operations tracing_ctrl_fops = { + .open = tracing_open_generic, + .read = tracing_ctrl_read, + .write = tracing_ctrl_write, +}; + +static struct file_operations set_tracer_fops = { + .open = tracing_open_generic, + .read = tracing_set_trace_read, + .write = tracing_set_trace_write, +}; + +#ifdef CONFIG_DYNAMIC_FTRACE + +static ssize_t +tracing_read_long(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + unsigned long *p = filp->private_data; + char buf[64]; + int r; + + r = sprintf(buf, "%ld\n", *p); + return simple_read_from_buffer(ubuf, cnt, ppos, + buf, r); +} + +static struct file_operations tracing_read_long_fops = { + .open = tracing_open_generic, + .read = tracing_read_long, +}; +#endif + +static struct dentry *d_tracer; + +struct dentry *tracing_init_dentry(void) +{ + static int once; + + if (d_tracer) + return d_tracer; + + d_tracer = debugfs_create_dir("tracing", NULL); + + if (!d_tracer && !once) { + once = 1; + pr_warning("Could not create debugfs directory 'tracing'\n"); + return NULL; + } + + return d_tracer; +} + +static __init void tracer_init_debugfs(void) +{ + struct dentry *d_tracer; + struct dentry *entry; + + d_tracer = tracing_init_dentry(); + + entry = debugfs_create_file("tracing_enabled", 0644, d_tracer, + &global_trace, &tracing_ctrl_fops); + if (!entry) + pr_warning("Could not create debugfs 'tracing_enabled' entry\n"); + + entry = debugfs_create_file("iter_ctrl", 0644, d_tracer, + NULL, &tracing_iter_fops); + if (!entry) + pr_warning("Could not create debugfs 'iter_ctrl' entry\n"); + + entry = debugfs_create_file("latency_trace", 0444, d_tracer, + &global_trace, &tracing_lt_fops); + if (!entry) + pr_warning("Could not create debugfs 'latency_trace' entry\n"); + + entry = debugfs_create_file("trace", 0444, d_tracer, + &global_trace, &tracing_fops); + if (!entry) + pr_warning("Could not create debugfs 'trace' entry\n"); + + entry = debugfs_create_file("available_tracers", 0444, d_tracer, + &global_trace, &show_traces_fops); + if (!entry) + pr_warning("Could not create debugfs 'trace' entry\n"); + + entry = debugfs_create_file("current_tracer", 0444, d_tracer, + &global_trace, &set_tracer_fops); + if (!entry) + pr_warning("Could not create debugfs 'trace' entry\n"); + + entry = debugfs_create_file("tracing_max_latency", 0644, d_tracer, + &tracing_max_latency, + &tracing_max_lat_fops); + if (!entry) + pr_warning("Could not create debugfs " + "'tracing_max_latency' entry\n"); + + entry = debugfs_create_file("tracing_thresh", 0644, d_tracer, + &tracing_thresh, &tracing_max_lat_fops); + if (!entry) + pr_warning("Could not create debugfs " + "'tracing_threash' entry\n"); + +#ifdef CONFIG_DYNAMIC_FTRACE + entry = debugfs_create_file("dyn_ftrace_total_info", 0444, d_tracer, + &ftrace_update_tot_cnt, + &tracing_read_long_fops); + if (!entry) + pr_warning("Could not create debugfs " + "'dyn_ftrace_total_info' entry\n"); +#endif +} + +/* dummy trace to disable tracing */ +static struct tracer no_tracer __read_mostly = +{ + .name = "none", +}; + +static inline notrace int page_order(const unsigned long size) +{ + const unsigned long nr_pages = DIV_ROUND_UP(size, PAGE_SIZE); + return ilog2(roundup_pow_of_two(nr_pages)); +} + +__init static int tracer_alloc_buffers(void) +{ + const int order = page_order(trace_nr_entries * TRACE_ENTRY_SIZE); + const unsigned long size = (1UL << order) << PAGE_SHIFT; + struct trace_entry *array; + int i; + + for_each_possible_cpu(i) { + global_trace.data[i] = &per_cpu(global_trace_cpu, i); + max_tr.data[i] = &per_cpu(max_data, i); + + array = (struct trace_entry *) + __get_free_pages(GFP_KERNEL, order); + if (array == NULL) { + printk(KERN_ERR "tracer: failed to allocate" + " %ld bytes for trace buffer!\n", size); + goto free_buffers; + } + global_trace.data[i]->trace = array; + +/* Only allocate if we are actually using the max trace */ +#ifdef CONFIG_TRACER_MAX_TRACE + array = (struct trace_entry *) + __get_free_pages(GFP_KERNEL, order); + if (array == NULL) { + printk(KERN_ERR "wakeup tracer: failed to allocate" + " %ld bytes for trace buffer!\n", size); + goto free_buffers; + } + max_tr.data[i]->trace = array; +#endif + } + + /* + * Since we allocate by orders of pages, we may be able to + * round up a bit. + */ + global_trace.entries = size / TRACE_ENTRY_SIZE; + max_tr.entries = global_trace.entries; + + pr_info("tracer: %ld bytes allocated for %ld", + size, trace_nr_entries); + pr_info(" entries of %ld bytes\n", (long)TRACE_ENTRY_SIZE); + pr_info(" actual entries %ld\n", global_trace.entries); + + tracer_init_debugfs(); + + trace_init_cmdlines(); + + register_tracer(&no_tracer); + current_trace = &no_tracer; + + return 0; + + free_buffers: + for (i-- ; i >= 0; i--) { + struct trace_array_cpu *data = global_trace.data[i]; + + if (data && data->trace) { + free_pages((unsigned long)data->trace, order); + data->trace = NULL; + } + +#ifdef CONFIG_TRACER_MAX_TRACE + data = max_tr.data[i]; + if (data && data->trace) { + free_pages((unsigned long)data->trace, order); + data->trace = NULL; + } +#endif + } + return -ENOMEM; +} + +device_initcall(tracer_alloc_buffers); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h new file mode 100644 index 000000000000..3173a93561d4 --- /dev/null +++ b/kernel/trace/trace.h @@ -0,0 +1,184 @@ +#ifndef _LINUX_KERNEL_TRACE_H +#define _LINUX_KERNEL_TRACE_H + +#include +#include +#include +#include + +/* + * Function trace entry - function address and parent function addres: + */ +struct ftrace_entry { + unsigned long ip; + unsigned long parent_ip; +}; + +/* + * Context switch trace entry - which task (and prio) we switched from/to: + */ +struct ctx_switch_entry { + unsigned int prev_pid; + unsigned char prev_prio; + unsigned char prev_state; + unsigned int next_pid; + unsigned char next_prio; +}; + +/* + * The trace entry - the most basic unit of tracing. This is what + * is printed in the end as a single line in the trace output, such as: + * + * bash-15816 [01] 235.197585: idle_cpu <- irq_enter + */ +struct trace_entry { + char type; + char cpu; + char flags; + char preempt_count; + int pid; + cycle_t t; + unsigned long idx; + union { + struct ftrace_entry fn; + struct ctx_switch_entry ctx; + }; +}; + +#define TRACE_ENTRY_SIZE sizeof(struct trace_entry) + +/* + * The CPU trace array - it consists of thousands of trace entries + * plus some other descriptor data: (for example which task started + * the trace, etc.) + */ +struct trace_array_cpu { + void *trace; + unsigned long trace_idx; + atomic_t disabled; + atomic_t underrun; + unsigned long saved_latency; + unsigned long critical_start; + unsigned long critical_end; + unsigned long critical_sequence; + unsigned long nice; + unsigned long policy; + unsigned long rt_priority; + cycle_t preempt_timestamp; + pid_t pid; + uid_t uid; + char comm[TASK_COMM_LEN]; +}; + +struct trace_iterator; + +/* + * The trace array - an array of per-CPU trace arrays. This is the + * highest level data structure that individual tracers deal with. + * They have on/off state as well: + */ +struct trace_array { + unsigned long entries; + long ctrl; + int cpu; + cycle_t time_start; + struct trace_array_cpu *data[NR_CPUS]; +}; + +/* + * A specific tracer, represented by methods that operate on a trace array: + */ +struct tracer { + const char *name; + void (*init)(struct trace_array *tr); + void (*reset)(struct trace_array *tr); + void (*open)(struct trace_iterator *iter); + void (*close)(struct trace_iterator *iter); + void (*start)(struct trace_iterator *iter); + void (*stop)(struct trace_iterator *iter); + void (*ctrl_update)(struct trace_array *tr); + struct tracer *next; + int print_max; +}; + +/* + * Trace iterator - used by printout routines who present trace + * results to users and which routines might sleep, etc: + */ +struct trace_iterator { + struct trace_array *tr; + struct tracer *trace; + struct trace_entry *ent; + unsigned long iter_flags; + loff_t pos; + unsigned long next_idx[NR_CPUS]; + int cpu; + int idx; +}; + +void notrace tracing_reset(struct trace_array_cpu *data); +int tracing_open_generic(struct inode *inode, struct file *filp); +struct dentry *tracing_init_dentry(void); +void ftrace(struct trace_array *tr, + struct trace_array_cpu *data, + unsigned long ip, + unsigned long parent_ip, + unsigned long flags); +void tracing_sched_switch_trace(struct trace_array *tr, + struct trace_array_cpu *data, + struct task_struct *prev, + struct task_struct *next, + unsigned long flags); +void tracing_record_cmdline(struct task_struct *tsk); + +void tracing_start_function_trace(void); +void tracing_stop_function_trace(void); +int register_tracer(struct tracer *type); +void unregister_tracer(struct tracer *type); + +extern unsigned long nsecs_to_usecs(unsigned long nsecs); + +extern unsigned long tracing_max_latency; +extern unsigned long tracing_thresh; + +void update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu); +void update_max_tr_single(struct trace_array *tr, + struct task_struct *tsk, int cpu); + +static inline notrace cycle_t now(int cpu) +{ + return cpu_clock(cpu); +} + +#ifdef CONFIG_SCHED_TRACER +extern void notrace +wakeup_sched_switch(struct task_struct *prev, struct task_struct *next); +#else +static inline void +wakeup_sched_switch(struct task_struct *prev, struct task_struct *next) +{ +} +#endif + +#ifdef CONFIG_CONTEXT_SWITCH_TRACER +typedef void +(*tracer_switch_func_t)(void *private, + struct task_struct *prev, + struct task_struct *next); + +struct tracer_switch_ops { + tracer_switch_func_t func; + void *private; + struct tracer_switch_ops *next; +}; + +extern int register_tracer_switch(struct tracer_switch_ops *ops); +extern int unregister_tracer_switch(struct tracer_switch_ops *ops); + +#endif /* CONFIG_CONTEXT_SWITCH_TRACER */ + +#ifdef CONFIG_DYNAMIC_FTRACE +extern unsigned long ftrace_update_tot_cnt; +#endif + +#endif /* _LINUX_KERNEL_TRACE_H */ -- cgit v1.2.3 From 1b29b01887e6032dcaf818c14999c7a39593b4e7 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:42 +0200 Subject: ftrace: function tracer This is a simple trace that uses the ftrace infrastructure. It is designed to be fast and small, and easy to use. It is useful to record things that happen over a very short period of time, and not to analyze the system in general. Updates: available_tracers "function" is added to this file. current_tracer To enable the function tracer: echo function > /debugfs/tracing/current_tracer To disable the tracer: echo disable > /debugfs/tracing/current_tracer The output of the function_trace file is as follows "echo noverbose > /debugfs/tracing/iter_ctrl" preemption latency trace v1.1.5 on 2.6.24-rc7-tst Signed-off-by: Ingo Molnar -------------------------------------------------------------------- latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4) ----------------- | task: -0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 0d.h. 1595128us+: set_normalized_timespec+0x8/0x2d (ktime_get_ts+0x4a/0x4e ) swapper-0 0d.h. 1595131us+: _spin_lock+0x8/0x18 (hrtimer_interrupt+0x6e/0x1b0 ) Or with verbose turned on: "echo verbose > /debugfs/tracing/iter_ctrl" preemption latency trace v1.1.5 on 2.6.24-rc7-tst -------------------------------------------------------------------- latency: 0 us, #419428/4361791, CPU#1 | (M:desktop VP:0, KP:0, SP:0 HP:0 #P:4) ----------------- | task: -0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- swapper 0 0 9 00000000 00000000 [f3675f41] 1595.128ms (+0.003ms): set_normalized_timespec+0x8/0x2d (ktime_get_ts+0x4a/0x4e ) swapper 0 0 9 00000000 00000001 [f3675f45] 1595.131ms (+0.003ms): _spin_lock+0x8/0x18 (hrtimer_interrupt+0x6e/0x1b0 ) swapper 0 0 9 00000000 00000002 [f3675f48] 1595.135ms (+0.003ms): _spin_lock+0x8/0x18 (hrtimer_interrupt+0x6e/0x1b0 ) The "trace" file is not affected by the verbose mode, but is by the symonly. echo "nosymonly" > /debugfs/tracing/iter_ctrl tracer: [ 81.479967] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a [ 81.479967] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a [ 81.479968] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24 [ 81.479968] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78 [ 81.479968] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70 [ 81.479969] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77 [ 81.479969] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24 echo "symonly" > /debugfs/tracing/iter_ctrl tracer: [ 81.479913] CPU 0: bash:3154 register_ftrace_function+0x5f/0x66 <-- _spin_unlock_irqrestore+0xe/0x5a [ 81.479913] CPU 0: bash:3154 _spin_unlock_irqrestore+0x3e/0x5a <-- sub_preempt_count+0xc/0x7a [ 81.479913] CPU 0: bash:3154 sub_preempt_count+0x30/0x7a <-- in_lock_functions+0x9/0x24 [ 81.479914] CPU 0: bash:3154 vfs_write+0x11d/0x155 <-- dnotify_parent+0x12/0x78 [ 81.479914] CPU 0: bash:3154 dnotify_parent+0x2d/0x78 <-- _spin_lock+0xe/0x70 [ 81.479914] CPU 0: bash:3154 _spin_lock+0x1b/0x70 <-- add_preempt_count+0xe/0x77 [ 81.479914] CPU 0: bash:3154 add_preempt_count+0x3e/0x77 <-- in_lock_functions+0x9/0x24 Signed-off-by: Steven Rostedt Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/Kconfig | 13 ++++++++ kernel/trace/Makefile | 1 + kernel/trace/trace_functions.c | 73 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 87 insertions(+) create mode 100644 kernel/trace/trace_functions.c diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index ce70677afbf9..1399f372b5dc 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -8,3 +8,16 @@ config TRACING bool select DEBUG_FS +config FTRACE + bool "Kernel Function Tracer" + depends on DEBUG_KERNEL && HAVE_FTRACE + select FRAME_POINTER + select TRACING + help + Enable the kernel to trace every kernel function. This is done + by using a compiler feature to insert a small, 5-byte No-Operation + instruction to the beginning of every kernel function, which NOP + sequence is then dynamically patched into a tracer call when + tracing is enabled by the administrator. If it's runtime disabled + (the bootup default), then the overhead of the instructions is very + small and not measurable even in micro-benchmarks. diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index 7af403175255..6bb5e50b4a40 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_FTRACE) += libftrace.o obj-$(CONFIG_TRACING) += trace.o +obj-$(CONFIG_FTRACE) += trace_functions.o libftrace-y := ftrace.o diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c new file mode 100644 index 000000000000..82988c5336e0 --- /dev/null +++ b/kernel/trace/trace_functions.c @@ -0,0 +1,73 @@ +/* + * ring buffer based function tracer + * + * Copyright (C) 2007-2008 Steven Rostedt + * Copyright (C) 2008 Ingo Molnar + * + * Based on code from the latency_tracer, that is: + * + * Copyright (C) 2004-2006 Ingo Molnar + * Copyright (C) 2004 William Lee Irwin III + */ +#include +#include +#include +#include + +#include "trace.h" + +static notrace void function_reset(struct trace_array *tr) +{ + int cpu; + + tr->time_start = now(tr->cpu); + + for_each_online_cpu(cpu) + tracing_reset(tr->data[cpu]); +} + +static notrace void start_function_trace(struct trace_array *tr) +{ + function_reset(tr); + tracing_start_function_trace(); +} + +static notrace void stop_function_trace(struct trace_array *tr) +{ + tracing_stop_function_trace(); +} + +static notrace void function_trace_init(struct trace_array *tr) +{ + if (tr->ctrl) + start_function_trace(tr); +} + +static notrace void function_trace_reset(struct trace_array *tr) +{ + if (tr->ctrl) + stop_function_trace(tr); +} + +static notrace void function_trace_ctrl_update(struct trace_array *tr) +{ + if (tr->ctrl) + start_function_trace(tr); + else + stop_function_trace(tr); +} + +static struct tracer function_trace __read_mostly = +{ + .name = "ftrace", + .init = function_trace_init, + .reset = function_trace_reset, + .ctrl_update = function_trace_ctrl_update, +}; + +static __init int init_function_trace(void) +{ + return register_tracer(&function_trace); +} + +device_initcall(init_function_trace); -- cgit v1.2.3 From 35e8e302e5d6e32675df2fc1dd3a53dfa6630dc1 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:42 +0200 Subject: ftrace: add tracing of context switches This patch adds context switch tracing, of the format of: _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | pid:prio:state \ / ||||| \ | / swapper-0 1d..3 137us+: 0:140:R --> 2912:120 sshd-2912 1d..3 216us+: 2912:120:S --> 0:140 swapper-0 1d..3 261us+: 0:140:R --> 2912:120 bash-2920 0d..3 267us+: 2920:120:S --> 0:140 sshd-2912 1d..3 330us!: 2912:120:S --> 0:140 swapper-0 1d..3 2389us+: 0:140:R --> 2847:120 yum-upda-2847 1d..3 2411us!: 2847:120:S --> 0:140 swapper-0 0d..3 11089us+: 0:140:R --> 3139:120 gdm-bina-3139 0d..3 11113us!: 3139:120:S --> 0:140 swapper-0 1d..3 102328us+: 0:140:R --> 2847:120 yum-upda-2847 1d..3 102348us!: 2847:120:S --> 0:140 "sched_switch" is added to /debugfs/tracing/available_tracers [ Eugene Teo Cc: Mathieu Desnoyers Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/Kconfig | 11 ++++ kernel/trace/Makefile | 1 + kernel/trace/trace_sched_switch.c | 116 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 128 insertions(+) create mode 100644 kernel/trace/trace_sched_switch.c diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 1399f372b5dc..5d6aa92866cd 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -13,6 +13,7 @@ config FTRACE depends on DEBUG_KERNEL && HAVE_FTRACE select FRAME_POINTER select TRACING + select CONTEXT_SWITCH_TRACER help Enable the kernel to trace every kernel function. This is done by using a compiler feature to insert a small, 5-byte No-Operation @@ -21,3 +22,13 @@ config FTRACE tracing is enabled by the administrator. If it's runtime disabled (the bootup default), then the overhead of the instructions is very small and not measurable even in micro-benchmarks. + +config CONTEXT_SWITCH_TRACER + bool "Trace process context switches" + depends on DEBUG_KERNEL + select TRACING + select MARKERS + help + This tracer gets called from the context switch and records + all switching of tasks. + diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index 6bb5e50b4a40..6b54ceb7f16e 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_FTRACE) += libftrace.o obj-$(CONFIG_TRACING) += trace.o +obj-$(CONFIG_CONTEXT_SWITCH_TRACER) += trace_sched_switch.o obj-$(CONFIG_FTRACE) += trace_functions.o libftrace-y := ftrace.o diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c new file mode 100644 index 000000000000..3e4771d3b890 --- /dev/null +++ b/kernel/trace/trace_sched_switch.c @@ -0,0 +1,116 @@ +/* + * trace context switch + * + * Copyright (C) 2007 Steven Rostedt + * + */ +#include +#include +#include +#include +#include +#include +#include + +#include "trace.h" + +static struct trace_array *ctx_trace; +static int __read_mostly tracer_enabled; + +static void notrace +ctx_switch_func(struct task_struct *prev, struct task_struct *next) +{ + struct trace_array *tr = ctx_trace; + struct trace_array_cpu *data; + unsigned long flags; + long disabled; + int cpu; + + if (!tracer_enabled) + return; + + raw_local_irq_save(flags); + cpu = raw_smp_processor_id(); + data = tr->data[cpu]; + disabled = atomic_inc_return(&data->disabled); + + if (likely(disabled == 1)) + tracing_sched_switch_trace(tr, data, prev, next, flags); + + atomic_dec(&data->disabled); + raw_local_irq_restore(flags); +} + +void ftrace_ctx_switch(struct task_struct *prev, struct task_struct *next) +{ + tracing_record_cmdline(prev); + + /* + * If tracer_switch_func only points to the local + * switch func, it still needs the ptr passed to it. + */ + ctx_switch_func(prev, next); + + /* + * Chain to the wakeup tracer (this is a NOP if disabled): + */ + wakeup_sched_switch(prev, next); +} + +static notrace void sched_switch_reset(struct trace_array *tr) +{ + int cpu; + + tr->time_start = now(tr->cpu); + + for_each_online_cpu(cpu) + tracing_reset(tr->data[cpu]); +} + +static notrace void start_sched_trace(struct trace_array *tr) +{ + sched_switch_reset(tr); + tracer_enabled = 1; +} + +static notrace void stop_sched_trace(struct trace_array *tr) +{ + tracer_enabled = 0; +} + +static notrace void sched_switch_trace_init(struct trace_array *tr) +{ + ctx_trace = tr; + + if (tr->ctrl) + start_sched_trace(tr); +} + +static notrace void sched_switch_trace_reset(struct trace_array *tr) +{ + if (tr->ctrl) + stop_sched_trace(tr); +} + +static void sched_switch_trace_ctrl_update(struct trace_array *tr) +{ + /* When starting a new trace, reset the buffers */ + if (tr->ctrl) + start_sched_trace(tr); + else + stop_sched_trace(tr); +} + +static struct tracer sched_switch_trace __read_mostly = +{ + .name = "sched_switch", + .init = sched_switch_trace_init, + .reset = sched_switch_trace_reset, + .ctrl_update = sched_switch_trace_ctrl_update, +}; + +__init static int init_sched_switch_trace(void) +{ + return register_tracer(&sched_switch_trace); +} +device_initcall(init_sched_switch_trace); -- cgit v1.2.3 From 352ad25aa4a189c667cb2af333948d34692a2d27 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:42 +0200 Subject: ftrace: tracer for scheduler wakeup latency This patch adds the tracer that tracks the wakeup latency of the highest priority waking task. "wakeup" is added to /debugfs/tracing/available_tracers Also added to /debugfs/tracing tracing_max_latency holds the current max latency for the wakeup wakeup_thresh if set to other than zero, a log will be recorded for every wakeup that takes longer than the number entered in here (usecs for all counters) (deletes previous trace) Examples: (with ftrace_enabled = 0) ============ preemption latency trace v1.1.5 on 2.6.24-rc8 Signed-off-by: Ingo Molnar -------------------------------------------------------------------- latency: 26 us, #2/2, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: migration/0-3 (uid:0 nice:-5 policy:1 rt_prio:99) ----------------- _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / quilt-8551 0d..3 0us+: wake_up_process+0x15/0x17 (sched_exec+0xc9/0x100 ) quilt-8551 0d..4 26us : sched_switch_callback+0x73/0x81 (schedule+0x483/0x6d5 ) vim:ft=help ============ (with ftrace_enabled = 1) ============ preemption latency trace v1.1.5 on 2.6.24-rc8 -------------------------------------------------------------------- latency: 36 us, #45/45, CPU#0 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: migration/1-5 (uid:0 nice:-5 policy:1 rt_prio:99) ----------------- _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / bash-10653 1d..3 0us : wake_up_process+0x15/0x17 (sched_exec+0xc9/0x100 ) bash-10653 1d..3 1us : try_to_wake_up+0x271/0x2e7 (sub_preempt_count+0xc/0x7a ) bash-10653 1d..2 2us : try_to_wake_up+0x296/0x2e7 (update_rq_clock+0x9/0x20 ) bash-10653 1d..2 2us : update_rq_clock+0x1e/0x20 (__update_rq_clock+0xc/0x90 ) bash-10653 1d..2 3us : __update_rq_clock+0x1b/0x90 (sched_clock+0x9/0x29 ) bash-10653 1d..2 4us : try_to_wake_up+0x2a6/0x2e7 (activate_task+0xc/0x3f ) bash-10653 1d..2 4us : activate_task+0x2d/0x3f (enqueue_task+0xe/0x66 ) bash-10653 1d..2 5us : enqueue_task+0x5b/0x66 (enqueue_task_rt+0x9/0x3c ) bash-10653 1d..2 6us : try_to_wake_up+0x2ba/0x2e7 (check_preempt_wakeup+0x12/0x99 ) [...] bash-10653 1d..5 33us : tracing_record_cmdline+0xcf/0xd4 (_spin_unlock+0x9/0x33 ) bash-10653 1d..5 34us : _spin_unlock+0x19/0x33 (sub_preempt_count+0xc/0x7a ) bash-10653 1d..4 35us : wakeup_sched_switch+0x65/0x2ff (_spin_lock_irqsave+0xc/0xa9 ) bash-10653 1d..4 35us : _spin_lock_irqsave+0x19/0xa9 (add_preempt_count+0xe/0x77 ) bash-10653 1d..4 36us : sched_switch_callback+0x73/0x81 (schedule+0x483/0x6d5 ) vim:ft=help ============ The [...] was added here to not waste your email box space. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 23 ++- kernel/trace/Kconfig | 13 ++ kernel/trace/Makefile | 1 + kernel/trace/trace_sched_wakeup.c | 310 ++++++++++++++++++++++++++++++++++++++ 4 files changed, 343 insertions(+), 4 deletions(-) create mode 100644 kernel/trace/trace_sched_wakeup.c diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index b96ef14c249a..db8a5e7abe41 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -5,10 +5,6 @@ #include -#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) -#define CALLER_ADDR1 ((unsigned long)__builtin_return_address(1)) -#define CALLER_ADDR2 ((unsigned long)__builtin_return_address(2)) - typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip); struct ftrace_ops { @@ -35,4 +31,23 @@ extern void mcount(void); # define unregister_ftrace_function(ops) do { } while (0) # define clear_ftrace_function(ops) do { } while (0) #endif /* CONFIG_FTRACE */ + + +#ifdef CONFIG_FRAME_POINTER +/* TODO: need to fix this for ARM */ +# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) +# define CALLER_ADDR1 ((unsigned long)__builtin_return_address(1)) +# define CALLER_ADDR2 ((unsigned long)__builtin_return_address(2)) +# define CALLER_ADDR3 ((unsigned long)__builtin_return_address(3)) +# define CALLER_ADDR4 ((unsigned long)__builtin_return_address(4)) +# define CALLER_ADDR5 ((unsigned long)__builtin_return_address(5)) +#else +# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) +# define CALLER_ADDR1 0UL +# define CALLER_ADDR2 0UL +# define CALLER_ADDR3 0UL +# define CALLER_ADDR4 0UL +# define CALLER_ADDR5 0UL +#endif + #endif /* _LINUX_FTRACE_H */ diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 5d6aa92866cd..892ecc94a82b 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -4,6 +4,9 @@ config HAVE_FTRACE bool +config TRACER_MAX_TRACE + bool + config TRACING bool select DEBUG_FS @@ -23,6 +26,16 @@ config FTRACE (the bootup default), then the overhead of the instructions is very small and not measurable even in micro-benchmarks. +config SCHED_TRACER + bool "Scheduling Latency Tracer" + depends on DEBUG_KERNEL + select TRACING + select CONTEXT_SWITCH_TRACER + select TRACER_MAX_TRACE + help + This tracer tracks the latency of the highest priority task + to be scheduled in, starting from the point it has woken up. + config CONTEXT_SWITCH_TRACER bool "Trace process context switches" depends on DEBUG_KERNEL diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index 6b54ceb7f16e..5508cdb19aea 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -3,5 +3,6 @@ obj-$(CONFIG_FTRACE) += libftrace.o obj-$(CONFIG_TRACING) += trace.o obj-$(CONFIG_CONTEXT_SWITCH_TRACER) += trace_sched_switch.o obj-$(CONFIG_FTRACE) += trace_functions.o +obj-$(CONFIG_SCHED_TRACER) += trace_sched_wakeup.o libftrace-y := ftrace.o diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c new file mode 100644 index 000000000000..7c3ccefcf4c3 --- /dev/null +++ b/kernel/trace/trace_sched_wakeup.c @@ -0,0 +1,310 @@ +/* + * trace task wakeup timings + * + * Copyright (C) 2007-2008 Steven Rostedt + * Copyright (C) 2008 Ingo Molnar + * + * Based on code from the latency_tracer, that is: + * + * Copyright (C) 2004-2006 Ingo Molnar + * Copyright (C) 2004 William Lee Irwin III + */ +#include +#include +#include +#include +#include +#include + +#include "trace.h" + +static struct trace_array *wakeup_trace; +static int __read_mostly tracer_enabled; + +static struct task_struct *wakeup_task; +static int wakeup_cpu; +static unsigned wakeup_prio = -1; + +static DEFINE_SPINLOCK(wakeup_lock); + +static void notrace __wakeup_reset(struct trace_array *tr); + +/* + * Should this new latency be reported/recorded? + */ +static int notrace report_latency(cycle_t delta) +{ + if (tracing_thresh) { + if (delta < tracing_thresh) + return 0; + } else { + if (delta <= tracing_max_latency) + return 0; + } + return 1; +} + +void notrace +wakeup_sched_switch(struct task_struct *prev, struct task_struct *next) +{ + unsigned long latency = 0, t0 = 0, t1 = 0; + struct trace_array *tr = wakeup_trace; + struct trace_array_cpu *data; + cycle_t T0, T1, delta; + unsigned long flags; + long disabled; + int cpu; + + if (unlikely(!tracer_enabled)) + return; + + /* + * When we start a new trace, we set wakeup_task to NULL + * and then set tracer_enabled = 1. We want to make sure + * that another CPU does not see the tracer_enabled = 1 + * and the wakeup_task with an older task, that might + * actually be the same as next. + */ + smp_rmb(); + + if (next != wakeup_task) + return; + + /* The task we are waitng for is waking up */ + data = tr->data[wakeup_cpu]; + + /* disable local data, not wakeup_cpu data */ + cpu = raw_smp_processor_id(); + disabled = atomic_inc_return(&tr->data[cpu]->disabled); + if (likely(disabled != 1)) + goto out; + + spin_lock_irqsave(&wakeup_lock, flags); + + /* We could race with grabbing wakeup_lock */ + if (unlikely(!tracer_enabled || next != wakeup_task)) + goto out_unlock; + + ftrace(tr, data, CALLER_ADDR1, CALLER_ADDR2, flags); + + /* + * usecs conversion is slow so we try to delay the conversion + * as long as possible: + */ + T0 = data->preempt_timestamp; + T1 = now(cpu); + delta = T1-T0; + + if (!report_latency(delta)) + goto out_unlock; + + latency = nsecs_to_usecs(delta); + + tracing_max_latency = delta; + t0 = nsecs_to_usecs(T0); + t1 = nsecs_to_usecs(T1); + + update_max_tr(tr, wakeup_task, wakeup_cpu); + + if (tracing_thresh) { + printk(KERN_INFO "(%16s-%-5d|#%d): %lu us wakeup latency " + "violates %lu us threshold.\n" + " => started at timestamp %lu: ", + wakeup_task->comm, wakeup_task->pid, + raw_smp_processor_id(), + latency, nsecs_to_usecs(tracing_thresh), t0); + } else { + printk(KERN_INFO "(%16s-%-5d|#%d): new %lu us maximum " + "wakeup latency.\n => started at timestamp %lu: ", + wakeup_task->comm, wakeup_task->pid, + cpu, latency, t0); + } + + printk(KERN_CONT " ended at timestamp %lu: ", t1); + dump_stack(); + t1 = nsecs_to_usecs(now(cpu)); + printk(KERN_CONT " dump-end timestamp %lu\n\n", t1); + +out_unlock: + __wakeup_reset(tr); + spin_unlock_irqrestore(&wakeup_lock, flags); +out: + atomic_dec(&tr->data[cpu]->disabled); +} + +static void notrace __wakeup_reset(struct trace_array *tr) +{ + struct trace_array_cpu *data; + int cpu; + + assert_spin_locked(&wakeup_lock); + + for_each_possible_cpu(cpu) { + data = tr->data[cpu]; + tracing_reset(data); + } + + wakeup_cpu = -1; + wakeup_prio = -1; + + if (wakeup_task) + put_task_struct(wakeup_task); + + wakeup_task = NULL; +} + +static void notrace wakeup_reset(struct trace_array *tr) +{ + unsigned long flags; + + spin_lock_irqsave(&wakeup_lock, flags); + __wakeup_reset(tr); + spin_unlock_irqrestore(&wakeup_lock, flags); +} + +static notrace void +wakeup_check_start(struct trace_array *tr, struct task_struct *p, + struct task_struct *curr) +{ + int cpu = smp_processor_id(); + unsigned long flags; + long disabled; + + if (likely(!rt_task(p)) || + p->prio >= wakeup_prio || + p->prio >= curr->prio) + return; + + disabled = atomic_inc_return(&tr->data[cpu]->disabled); + if (unlikely(disabled != 1)) + goto out; + + /* interrupts should be off from try_to_wake_up */ + spin_lock(&wakeup_lock); + + /* check for races. */ + if (!tracer_enabled || p->prio >= wakeup_prio) + goto out_locked; + + /* reset the trace */ + __wakeup_reset(tr); + + wakeup_cpu = task_cpu(p); + wakeup_prio = p->prio; + + wakeup_task = p; + get_task_struct(wakeup_task); + + local_save_flags(flags); + + tr->data[wakeup_cpu]->preempt_timestamp = now(cpu); + ftrace(tr, tr->data[wakeup_cpu], CALLER_ADDR1, CALLER_ADDR2, flags); + +out_locked: + spin_unlock(&wakeup_lock); +out: + atomic_dec(&tr->data[cpu]->disabled); +} + +notrace void +ftrace_wake_up_task(struct task_struct *wakee, struct task_struct *curr) +{ + if (likely(!tracer_enabled)) + return; + + wakeup_check_start(wakeup_trace, wakee, curr); +} + +notrace void +ftrace_wake_up_new_task(struct task_struct *wakee, struct task_struct *curr) +{ + if (likely(!tracer_enabled)) + return; + + wakeup_check_start(wakeup_trace, wakee, curr); +} + +static notrace void start_wakeup_tracer(struct trace_array *tr) +{ + wakeup_reset(tr); + + /* + * Don't let the tracer_enabled = 1 show up before + * the wakeup_task is reset. This may be overkill since + * wakeup_reset does a spin_unlock after setting the + * wakeup_task to NULL, but I want to be safe. + * This is a slow path anyway. + */ + smp_wmb(); + + tracer_enabled = 1; + + return; +} + +static notrace void stop_wakeup_tracer(struct trace_array *tr) +{ + tracer_enabled = 0; +} + +static notrace void wakeup_tracer_init(struct trace_array *tr) +{ + wakeup_trace = tr; + + if (tr->ctrl) + start_wakeup_tracer(tr); +} + +static notrace void wakeup_tracer_reset(struct trace_array *tr) +{ + if (tr->ctrl) { + stop_wakeup_tracer(tr); + /* make sure we put back any tasks we are tracing */ + wakeup_reset(tr); + } +} + +static void wakeup_tracer_ctrl_update(struct trace_array *tr) +{ + if (tr->ctrl) + start_wakeup_tracer(tr); + else + stop_wakeup_tracer(tr); +} + +static void notrace wakeup_tracer_open(struct trace_iterator *iter) +{ + /* stop the trace while dumping */ + if (iter->tr->ctrl) + stop_wakeup_tracer(iter->tr); +} + +static void notrace wakeup_tracer_close(struct trace_iterator *iter) +{ + /* forget about any processes we were recording */ + if (iter->tr->ctrl) + start_wakeup_tracer(iter->tr); +} + +static struct tracer wakeup_tracer __read_mostly = +{ + .name = "wakeup", + .init = wakeup_tracer_init, + .reset = wakeup_tracer_reset, + .open = wakeup_tracer_open, + .close = wakeup_tracer_close, + .ctrl_update = wakeup_tracer_ctrl_update, + .print_max = 1, +}; + +__init static int init_wakeup_tracer(void) +{ + int ret; + + ret = register_tracer(&wakeup_tracer); + if (ret) + return ret; + + return 0; +} +device_initcall(init_wakeup_tracer); -- cgit v1.2.3 From 81d68a96a39844853b37f20cc8282d9b65b78ef3 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:42 +0200 Subject: ftrace: trace irq disabled critical timings This patch adds latency tracing for critical timings (how long interrupts are disabled for). "irqsoff" is added to /debugfs/tracing/available_tracers Note: tracing_max_latency also holds the max latency for irqsoff (in usecs). (default to large number so one must start latency tracing) tracing_thresh threshold (in usecs) to always print out if irqs off is detected to be longer than stated here. If irq_thresh is non-zero, then max_irq_latency is ignored. Here's an example of a trace with ftrace_enabled = 0 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 Signed-off-by: Ingo Molnar -------------------------------------------------------------------- latency: 100 us, #3/3, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1d.s3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1d.s3 100us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1d.s3 100us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= And this is a trace with ftrace_enabled == 1 ======= preemption latency trace v1.1.5 on 2.6.24-rc7 -------------------------------------------------------------------- latency: 102 us, #12/12, CPU#1 | (M:rt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- => started at: _spin_lock_irqsave+0x2a/0xb7 => ended at: _spin_unlock_irqrestore+0x32/0x5f _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / swapper-0 1dNs3 0us+: _spin_lock_irqsave+0x2a/0xb7 (e1000_update_stats+0x47/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_read_phy_reg+0x16/0x225 [e1000] (e1000_update_stats+0x5e2/0x64c [e1000]) swapper-0 1dNs3 46us : e1000_swfw_sync_acquire+0x10/0x99 [e1000] (e1000_read_phy_reg+0x49/0x225 [e1000]) swapper-0 1dNs3 46us : e1000_get_hw_eeprom_semaphore+0x12/0xa6 [e1000] (e1000_swfw_sync_acquire+0x36/0x99 [e1000]) swapper-0 1dNs3 47us : __const_udelay+0x9/0x47 (e1000_read_phy_reg+0x116/0x225 [e1000]) swapper-0 1dNs3 47us+: __delay+0x9/0x50 (__const_udelay+0x45/0x47) swapper-0 1dNs3 97us : preempt_schedule+0xc/0x84 (__delay+0x4e/0x50) swapper-0 1dNs3 98us : e1000_swfw_sync_release+0xc/0x55 [e1000] (e1000_read_phy_reg+0x211/0x225 [e1000]) swapper-0 1dNs3 99us+: e1000_put_hw_eeprom_semaphore+0x9/0x35 [e1000] (e1000_swfw_sync_release+0x50/0x55 [e1000]) swapper-0 1dNs3 101us : _spin_unlock_irqrestore+0xe/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : _spin_unlock_irqrestore+0x32/0x5f (e1000_update_stats+0x641/0x64c [e1000]) swapper-0 1dNs3 102us : trace_hardirqs_on_caller+0x75/0x89 (_spin_unlock_irqrestore+0x32/0x5f) vim:ft=help ======= Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process_64.c | 3 + arch/x86/lib/Makefile | 1 + arch/x86/lib/thunk_32.S | 47 +++++ arch/x86/lib/thunk_64.S | 19 +- include/asm-x86/irqflags.h | 24 +-- include/linux/ftrace.h | 8 + include/linux/irqflags.h | 12 +- kernel/fork.c | 2 +- kernel/lockdep.c | 23 ++- kernel/printk.c | 2 + kernel/trace/Kconfig | 18 ++ kernel/trace/Makefile | 1 + kernel/trace/trace_irqsoff.c | 402 +++++++++++++++++++++++++++++++++++++++++++ 13 files changed, 531 insertions(+), 31 deletions(-) create mode 100644 arch/x86/lib/thunk_32.S create mode 100644 kernel/trace/trace_irqsoff.c diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index e2319f39988b..dd349c92f051 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -165,7 +165,10 @@ void cpu_idle(void) */ local_irq_disable(); enter_idle(); + /* Don't trace irqs off for idle */ + stop_critical_timings(); idle(); + start_critical_timings(); /* In many cases the interrupt that ended idle has already called exit_idle. But some idle loops can be woken up without interrupt. */ diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 76f60f52a885..84aa2883fe15 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_SMP) := msr-on-cpu.o lib-y := delay_$(BITS).o +lib-y += thunk_$(BITS).o lib-y += usercopy_$(BITS).o getuser_$(BITS).o putuser_$(BITS).o lib-y += memcpy_$(BITS).o diff --git a/arch/x86/lib/thunk_32.S b/arch/x86/lib/thunk_32.S new file mode 100644 index 000000000000..650b11e00ecc --- /dev/null +++ b/arch/x86/lib/thunk_32.S @@ -0,0 +1,47 @@ +/* + * Trampoline to trace irqs off. (otherwise CALLER_ADDR1 might crash) + * Copyright 2008 by Steven Rostedt, Red Hat, Inc + * (inspired by Andi Kleen's thunk_64.S) + * Subject to the GNU public license, v.2. No warranty of any kind. + */ + + #include + +#define ARCH_TRACE_IRQS_ON \ + pushl %eax; \ + pushl %ecx; \ + pushl %edx; \ + call trace_hardirqs_on; \ + popl %edx; \ + popl %ecx; \ + popl %eax; + +#define ARCH_TRACE_IRQS_OFF \ + pushl %eax; \ + pushl %ecx; \ + pushl %edx; \ + call trace_hardirqs_off; \ + popl %edx; \ + popl %ecx; \ + popl %eax; + +#ifdef CONFIG_TRACE_IRQFLAGS + /* put return address in eax (arg1) */ + .macro thunk_ra name,func + .globl \name +\name: + pushl %eax + pushl %ecx + pushl %edx + /* Place EIP in the arg1 */ + movl 3*4(%esp), %eax + call \func + popl %edx + popl %ecx + popl %eax + ret + .endm + + thunk_ra trace_hardirqs_on_thunk,trace_hardirqs_on_caller + thunk_ra trace_hardirqs_off_thunk,trace_hardirqs_off_caller +#endif diff --git a/arch/x86/lib/thunk_64.S b/arch/x86/lib/thunk_64.S index e009251d4e9f..bf9a7d5a5428 100644 --- a/arch/x86/lib/thunk_64.S +++ b/arch/x86/lib/thunk_64.S @@ -2,6 +2,7 @@ * Save registers before calling assembly functions. This avoids * disturbance of register allocation in some inline assembly constructs. * Copyright 2001,2002 by Andi Kleen, SuSE Labs. + * Added trace_hardirqs callers - Copyright 2007 Steven Rostedt, Red Hat, Inc. * Subject to the GNU public license, v.2. No warranty of any kind. */ @@ -42,8 +43,22 @@ #endif #ifdef CONFIG_TRACE_IRQFLAGS - thunk trace_hardirqs_on_thunk,trace_hardirqs_on - thunk trace_hardirqs_off_thunk,trace_hardirqs_off + /* put return address in rdi (arg1) */ + .macro thunk_ra name,func + .globl \name +\name: + CFI_STARTPROC + SAVE_ARGS + /* SAVE_ARGS pushs 9 elements */ + /* the next element would be the rip */ + movq 9*8(%rsp), %rdi + call \func + jmp restore + CFI_ENDPROC + .endm + + thunk_ra trace_hardirqs_on_thunk,trace_hardirqs_on_caller + thunk_ra trace_hardirqs_off_thunk,trace_hardirqs_off_caller #endif #ifdef CONFIG_DEBUG_LOCK_ALLOC diff --git a/include/asm-x86/irqflags.h b/include/asm-x86/irqflags.h index c242527f970e..24d71b1eb189 100644 --- a/include/asm-x86/irqflags.h +++ b/include/asm-x86/irqflags.h @@ -179,8 +179,6 @@ static inline void trace_hardirqs_fixup(void) * have a reliable stack. x86_64 only. */ #define SWAPGS_UNSAFE_STACK swapgs -#define ARCH_TRACE_IRQS_ON call trace_hardirqs_on_thunk -#define ARCH_TRACE_IRQS_OFF call trace_hardirqs_off_thunk #define ARCH_LOCKDEP_SYS_EXIT call lockdep_sys_exit_thunk #define ARCH_LOCKDEP_SYS_EXIT_IRQ \ TRACE_IRQS_ON; \ @@ -192,24 +190,6 @@ static inline void trace_hardirqs_fixup(void) TRACE_IRQS_OFF; #else -#define ARCH_TRACE_IRQS_ON \ - pushl %eax; \ - pushl %ecx; \ - pushl %edx; \ - call trace_hardirqs_on; \ - popl %edx; \ - popl %ecx; \ - popl %eax; - -#define ARCH_TRACE_IRQS_OFF \ - pushl %eax; \ - pushl %ecx; \ - pushl %edx; \ - call trace_hardirqs_off; \ - popl %edx; \ - popl %ecx; \ - popl %eax; - #define ARCH_LOCKDEP_SYS_EXIT \ pushl %eax; \ pushl %ecx; \ @@ -223,8 +203,8 @@ static inline void trace_hardirqs_fixup(void) #endif #ifdef CONFIG_TRACE_IRQFLAGS -# define TRACE_IRQS_ON ARCH_TRACE_IRQS_ON -# define TRACE_IRQS_OFF ARCH_TRACE_IRQS_OFF +# define TRACE_IRQS_ON call trace_hardirqs_on_thunk; +# define TRACE_IRQS_OFF call trace_hardirqs_off_thunk; #else # define TRACE_IRQS_ON # define TRACE_IRQS_OFF diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index db8a5e7abe41..0a20445dcbcc 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -50,4 +50,12 @@ extern void mcount(void); # define CALLER_ADDR5 0UL #endif +#ifdef CONFIG_IRQSOFF_TRACER + extern void notrace time_hardirqs_on(unsigned long a0, unsigned long a1); + extern void notrace time_hardirqs_off(unsigned long a0, unsigned long a1); +#else +# define time_hardirqs_on(a0, a1) do { } while (0) +# define time_hardirqs_off(a0, a1) do { } while (0) +#endif + #endif /* _LINUX_FTRACE_H */ diff --git a/include/linux/irqflags.h b/include/linux/irqflags.h index e600c4e9b8c5..5b711d4e9fd9 100644 --- a/include/linux/irqflags.h +++ b/include/linux/irqflags.h @@ -12,10 +12,10 @@ #define _LINUX_TRACE_IRQFLAGS_H #ifdef CONFIG_TRACE_IRQFLAGS - extern void trace_hardirqs_on(void); - extern void trace_hardirqs_off(void); extern void trace_softirqs_on(unsigned long ip); extern void trace_softirqs_off(unsigned long ip); + extern void trace_hardirqs_on(void); + extern void trace_hardirqs_off(void); # define trace_hardirq_context(p) ((p)->hardirq_context) # define trace_softirq_context(p) ((p)->softirq_context) # define trace_hardirqs_enabled(p) ((p)->hardirqs_enabled) @@ -41,6 +41,14 @@ # define INIT_TRACE_IRQFLAGS #endif +#ifdef CONFIG_IRQSOFF_TRACER + extern void stop_critical_timings(void); + extern void start_critical_timings(void); +#else +# define stop_critical_timings() do { } while (0) +# define start_critical_timings() do { } while (0) +#endif + #ifdef CONFIG_TRACE_IRQFLAGS_SUPPORT #include diff --git a/kernel/fork.c b/kernel/fork.c index 19908b26cf80..d66d676dc362 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -909,7 +909,7 @@ static struct task_struct *copy_process(unsigned long clone_flags, rt_mutex_init_task(p); -#ifdef CONFIG_TRACE_IRQFLAGS +#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_LOCKDEP) DEBUG_LOCKS_WARN_ON(!p->hardirqs_enabled); DEBUG_LOCKS_WARN_ON(!p->softirqs_enabled); #endif diff --git a/kernel/lockdep.c b/kernel/lockdep.c index 81a4e4a3f087..e21924365ea3 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -39,6 +39,7 @@ #include #include #include +#include #include @@ -982,7 +983,7 @@ check_noncircular(struct lock_class *source, unsigned int depth) return 1; } -#ifdef CONFIG_TRACE_IRQFLAGS +#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_PROVE_LOCKING) /* * Forwards and backwards subgraph searching, for the purposes of * proving that two subgraphs can be connected by a new dependency @@ -1680,7 +1681,7 @@ valid_state(struct task_struct *curr, struct held_lock *this, static int mark_lock(struct task_struct *curr, struct held_lock *this, enum lock_usage_bit new_bit); -#ifdef CONFIG_TRACE_IRQFLAGS +#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_PROVE_LOCKING) /* * print irq inversion bug: @@ -2013,11 +2014,13 @@ void early_boot_irqs_on(void) /* * Hardirqs will be enabled: */ -void trace_hardirqs_on(void) +void notrace trace_hardirqs_on_caller(unsigned long a0) { struct task_struct *curr = current; unsigned long ip; + time_hardirqs_on(CALLER_ADDR0, a0); + if (unlikely(!debug_locks || current->lockdep_recursion)) return; @@ -2055,16 +2058,23 @@ void trace_hardirqs_on(void) curr->hardirq_enable_event = ++curr->irq_events; debug_atomic_inc(&hardirqs_on_events); } +EXPORT_SYMBOL(trace_hardirqs_on_caller); +void notrace trace_hardirqs_on(void) +{ + trace_hardirqs_on_caller(CALLER_ADDR0); +} EXPORT_SYMBOL(trace_hardirqs_on); /* * Hardirqs were disabled: */ -void trace_hardirqs_off(void) +void notrace trace_hardirqs_off_caller(unsigned long a0) { struct task_struct *curr = current; + time_hardirqs_off(CALLER_ADDR0, a0); + if (unlikely(!debug_locks || current->lockdep_recursion)) return; @@ -2082,7 +2092,12 @@ void trace_hardirqs_off(void) } else debug_atomic_inc(&redundant_hardirqs_off); } +EXPORT_SYMBOL(trace_hardirqs_off_caller); +void notrace trace_hardirqs_off(void) +{ + trace_hardirqs_off_caller(CALLER_ADDR0); +} EXPORT_SYMBOL(trace_hardirqs_off); /* diff --git a/kernel/printk.c b/kernel/printk.c index 8fb01c32aa3b..ae7d5b9e535d 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1041,7 +1041,9 @@ void release_console_sem(void) _log_end = log_end; con_start = log_end; /* Flush */ spin_unlock(&logbuf_lock); + stop_critical_timings(); /* don't trace print latency */ call_console_drivers(_con_start, _log_end); + start_critical_timings(); local_irq_restore(flags); } console_locked = 0; diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 892ecc94a82b..896df1cf6adc 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -26,6 +26,24 @@ config FTRACE (the bootup default), then the overhead of the instructions is very small and not measurable even in micro-benchmarks. +config IRQSOFF_TRACER + bool "Interrupts-off Latency Tracer" + default n + depends on TRACE_IRQFLAGS_SUPPORT + depends on GENERIC_TIME + select TRACE_IRQFLAGS + select TRACING + select TRACER_MAX_TRACE + help + This option measures the time spent in irqs-off critical + sections, with microsecond accuracy. + + The default measurement method is a maximum search, which is + disabled by default and can be runtime (re-)started + via: + + echo 0 > /debugfs/tracing/tracing_max_latency + config SCHED_TRACER bool "Scheduling Latency Tracer" depends on DEBUG_KERNEL diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index 5508cdb19aea..46be8647fb65 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_FTRACE) += libftrace.o obj-$(CONFIG_TRACING) += trace.o obj-$(CONFIG_CONTEXT_SWITCH_TRACER) += trace_sched_switch.o obj-$(CONFIG_FTRACE) += trace_functions.o +obj-$(CONFIG_IRQSOFF_TRACER) += trace_irqsoff.o obj-$(CONFIG_SCHED_TRACER) += trace_sched_wakeup.o libftrace-y := ftrace.o diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c new file mode 100644 index 000000000000..a9131b0cf1a5 --- /dev/null +++ b/kernel/trace/trace_irqsoff.c @@ -0,0 +1,402 @@ +/* + * trace irqs off criticall timings + * + * Copyright (C) 2007-2008 Steven Rostedt + * Copyright (C) 2008 Ingo Molnar + * + * From code in the latency_tracer, that is: + * + * Copyright (C) 2004-2006 Ingo Molnar + * Copyright (C) 2004 William Lee Irwin III + */ +#include +#include +#include +#include +#include +#include + +#include "trace.h" + +static struct trace_array *irqsoff_trace __read_mostly; +static int tracer_enabled __read_mostly; + +/* + * Sequence count - we record it when starting a measurement and + * skip the latency if the sequence has changed - some other section + * did a maximum and could disturb our measurement with serial console + * printouts, etc. Truly coinciding maximum latencies should be rare + * and what happens together happens separately as well, so this doesnt + * decrease the validity of the maximum found: + */ +static __cacheline_aligned_in_smp unsigned long max_sequence; + +#ifdef CONFIG_FTRACE +/* + * irqsoff uses its own tracer function to keep the overhead down: + */ +static void notrace +irqsoff_tracer_call(unsigned long ip, unsigned long parent_ip) +{ + struct trace_array *tr = irqsoff_trace; + struct trace_array_cpu *data; + unsigned long flags; + long disabled; + int cpu; + + if (likely(!tracer_enabled)) + return; + + local_save_flags(flags); + + if (!irqs_disabled_flags(flags)) + return; + + cpu = raw_smp_processor_id(); + data = tr->data[cpu]; + disabled = atomic_inc_return(&data->disabled); + + if (likely(disabled == 1)) + ftrace(tr, data, ip, parent_ip, flags); + + atomic_dec(&data->disabled); +} + +static struct ftrace_ops trace_ops __read_mostly = +{ + .func = irqsoff_tracer_call, +}; +#endif /* CONFIG_FTRACE */ + +/* + * Should this new latency be reported/recorded? + */ +static int notrace report_latency(cycle_t delta) +{ + if (tracing_thresh) { + if (delta < tracing_thresh) + return 0; + } else { + if (delta <= tracing_max_latency) + return 0; + } + return 1; +} + +static void notrace +check_critical_timing(struct trace_array *tr, + struct trace_array_cpu *data, + unsigned long parent_ip, + int cpu) +{ + unsigned long latency, t0, t1; + cycle_t T0, T1, T2, delta; + unsigned long flags; + + /* + * usecs conversion is slow so we try to delay the conversion + * as long as possible: + */ + T0 = data->preempt_timestamp; + T1 = now(cpu); + delta = T1-T0; + + local_save_flags(flags); + + if (!report_latency(delta)) + goto out; + + ftrace(tr, data, CALLER_ADDR0, parent_ip, flags); + /* + * Update the timestamp, because the trace entry above + * might change it (it can only get larger so the latency + * is fair to be reported): + */ + T2 = now(cpu); + + delta = T2-T0; + + latency = nsecs_to_usecs(delta); + + if (data->critical_sequence != max_sequence) + goto out; + + tracing_max_latency = delta; + t0 = nsecs_to_usecs(T0); + t1 = nsecs_to_usecs(T1); + + data->critical_end = parent_ip; + + update_max_tr_single(tr, current, cpu); + + if (tracing_thresh) + printk(KERN_INFO "(%16s-%-5d|#%d): %lu us critical section " + "violates %lu us threshold.\n" + " => started at timestamp %lu: ", + current->comm, current->pid, + raw_smp_processor_id(), + latency, nsecs_to_usecs(tracing_thresh), t0); + else + printk(KERN_INFO "(%16s-%-5d|#%d):" + " new %lu us maximum-latency " + "critical section.\n => started at timestamp %lu: ", + current->comm, current->pid, + raw_smp_processor_id(), + latency, t0); + + print_symbol(KERN_CONT "<%s>\n", data->critical_start); + printk(KERN_CONT " => ended at timestamp %lu: ", t1); + print_symbol(KERN_CONT "<%s>\n", data->critical_end); + dump_stack(); + t1 = nsecs_to_usecs(now(cpu)); + printk(KERN_CONT " => dump-end timestamp %lu\n\n", t1); + + max_sequence++; + +out: + data->critical_sequence = max_sequence; + data->preempt_timestamp = now(cpu); + tracing_reset(data); + ftrace(tr, data, CALLER_ADDR0, parent_ip, flags); +} + +static inline void notrace +start_critical_timing(unsigned long ip, unsigned long parent_ip) +{ + int cpu; + struct trace_array *tr = irqsoff_trace; + struct trace_array_cpu *data; + unsigned long flags; + + if (likely(!tracer_enabled)) + return; + + cpu = raw_smp_processor_id(); + data = tr->data[cpu]; + + if (unlikely(!data) || unlikely(!data->trace) || + data->critical_start || atomic_read(&data->disabled)) + return; + + atomic_inc(&data->disabled); + + data->critical_sequence = max_sequence; + data->preempt_timestamp = now(cpu); + data->critical_start = parent_ip; + tracing_reset(data); + + local_save_flags(flags); + ftrace(tr, data, ip, parent_ip, flags); + + atomic_dec(&data->disabled); +} + +static inline void notrace +stop_critical_timing(unsigned long ip, unsigned long parent_ip) +{ + int cpu; + struct trace_array *tr = irqsoff_trace; + struct trace_array_cpu *data; + unsigned long flags; + + if (likely(!tracer_enabled)) + return; + + cpu = raw_smp_processor_id(); + data = tr->data[cpu]; + + if (unlikely(!data) || unlikely(!data->trace) || + !data->critical_start || atomic_read(&data->disabled)) + return; + + atomic_inc(&data->disabled); + local_save_flags(flags); + ftrace(tr, data, ip, parent_ip, flags); + check_critical_timing(tr, data, parent_ip, cpu); + data->critical_start = 0; + atomic_dec(&data->disabled); +} + +void notrace start_critical_timings(void) +{ + unsigned long flags; + + local_save_flags(flags); + + if (irqs_disabled_flags(flags)) + start_critical_timing(CALLER_ADDR0, CALLER_ADDR1); +} + +void notrace stop_critical_timings(void) +{ + unsigned long flags; + + local_save_flags(flags); + + if (irqs_disabled_flags(flags)) + stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); +} + +#ifdef CONFIG_PROVE_LOCKING +void notrace time_hardirqs_on(unsigned long a0, unsigned long a1) +{ + unsigned long flags; + + local_save_flags(flags); + + if (irqs_disabled_flags(flags)) + stop_critical_timing(a0, a1); +} + +void notrace time_hardirqs_off(unsigned long a0, unsigned long a1) +{ + unsigned long flags; + + local_save_flags(flags); + + if (irqs_disabled_flags(flags)) + start_critical_timing(a0, a1); +} + +#else /* !CONFIG_PROVE_LOCKING */ + +/* + * Stubs: + */ + +void early_boot_irqs_off(void) +{ +} + +void early_boot_irqs_on(void) +{ +} + +void trace_softirqs_on(unsigned long ip) +{ +} + +void trace_softirqs_off(unsigned long ip) +{ +} + +inline void print_irqtrace_events(struct task_struct *curr) +{ +} + +/* + * We are only interested in hardirq on/off events: + */ +void notrace trace_hardirqs_on(void) +{ + unsigned long flags; + + local_save_flags(flags); + + if (irqs_disabled_flags(flags)) + stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); +} +EXPORT_SYMBOL(trace_hardirqs_on); + +void notrace trace_hardirqs_off(void) +{ + unsigned long flags; + + local_save_flags(flags); + + if (irqs_disabled_flags(flags)) + start_critical_timing(CALLER_ADDR0, CALLER_ADDR1); +} +EXPORT_SYMBOL(trace_hardirqs_off); + +void notrace trace_hardirqs_on_caller(unsigned long caller_addr) +{ + unsigned long flags; + + local_save_flags(flags); + + if (irqs_disabled_flags(flags)) + stop_critical_timing(CALLER_ADDR0, caller_addr); +} +EXPORT_SYMBOL(trace_hardirqs_on_caller); + +void notrace trace_hardirqs_off_caller(unsigned long caller_addr) +{ + unsigned long flags; + + local_save_flags(flags); + + if (irqs_disabled_flags(flags)) + start_critical_timing(CALLER_ADDR0, caller_addr); +} +EXPORT_SYMBOL(trace_hardirqs_off_caller); + +#endif /* CONFIG_PROVE_LOCKING */ + +static void start_irqsoff_tracer(struct trace_array *tr) +{ + tracer_enabled = 1; + register_ftrace_function(&trace_ops); +} + +static void stop_irqsoff_tracer(struct trace_array *tr) +{ + unregister_ftrace_function(&trace_ops); + tracer_enabled = 0; +} + +static void irqsoff_tracer_init(struct trace_array *tr) +{ + irqsoff_trace = tr; + /* make sure that the tracer is visibel */ + smp_wmb(); + + if (tr->ctrl) + start_irqsoff_tracer(tr); +} + +static void irqsoff_tracer_reset(struct trace_array *tr) +{ + if (tr->ctrl) + stop_irqsoff_tracer(tr); +} + +static void irqsoff_tracer_ctrl_update(struct trace_array *tr) +{ + if (tr->ctrl) + start_irqsoff_tracer(tr); + else + stop_irqsoff_tracer(tr); +} + +static void notrace irqsoff_tracer_open(struct trace_iterator *iter) +{ + /* stop the trace while dumping */ + if (iter->tr->ctrl) + stop_irqsoff_tracer(iter->tr); +} + +static void notrace irqsoff_tracer_close(struct trace_iterator *iter) +{ + if (iter->tr->ctrl) + start_irqsoff_tracer(iter->tr); +} + +static struct tracer irqsoff_tracer __read_mostly = +{ + .name = "irqsoff", + .init = irqsoff_tracer_init, + .reset = irqsoff_tracer_reset, + .open = irqsoff_tracer_open, + .close = irqsoff_tracer_close, + .ctrl_update = irqsoff_tracer_ctrl_update, + .print_max = 1, +}; + +__init static int init_irqsoff_tracer(void) +{ + register_tracer(&irqsoff_tracer); + + return 0; +} +device_initcall(init_irqsoff_tracer); -- cgit v1.2.3 From 6cd8a4bb2f97527a9ceb30bc77ea4e959c6a95e3 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:42 +0200 Subject: ftrace: trace preempt off critical timings Add preempt off timings. A lot of kernel core code is taken from the RT patch latency trace that was written by Ingo Molnar. This adds "preemptoff" and "preemptirqsoff" to /debugfs/tracing/available_tracers Now instead of just tracing irqs off, preemption off can be selected to be recorded. When this is selected, it shares the same files as irqs off timings. One can either trace preemption off, irqs off, or one or the other off. By echoing "preemptoff" into /debugfs/tracing/current_tracer, recording of preempt off only is performed. "irqsoff" will only record the time irqs are disabled, but "preemptirqsoff" will take the total time irqs or preemption are disabled. Runtime switching of these options is now supported by simpling echoing in the appropriate trace name into /debugfs/tracing/current_tracer. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/process_32.c | 3 + include/linux/ftrace.h | 8 ++ include/linux/irqflags.h | 3 +- include/linux/preempt.h | 2 +- kernel/sched.c | 24 +++++- kernel/trace/Kconfig | 25 ++++++ kernel/trace/Makefile | 1 + kernel/trace/trace_irqsoff.c | 184 +++++++++++++++++++++++++++++++------------ 8 files changed, 197 insertions(+), 53 deletions(-) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index f8476dfbb60d..a30aa1f2607a 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -185,7 +185,10 @@ void cpu_idle(void) local_irq_disable(); __get_cpu_var(irq_stat).idle_timestamp = jiffies; + /* Don't trace irqs off for idle */ + stop_critical_timings(); idle(); + start_critical_timings(); } tick_nohz_restart_sched_tick(); preempt_enable_no_resched(); diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 0a20445dcbcc..740c97dcf9cb 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -58,4 +58,12 @@ extern void mcount(void); # define time_hardirqs_off(a0, a1) do { } while (0) #endif +#ifdef CONFIG_PREEMPT_TRACER + extern void notrace trace_preempt_on(unsigned long a0, unsigned long a1); + extern void notrace trace_preempt_off(unsigned long a0, unsigned long a1); +#else +# define trace_preempt_on(a0, a1) do { } while (0) +# define trace_preempt_off(a0, a1) do { } while (0) +#endif + #endif /* _LINUX_FTRACE_H */ diff --git a/include/linux/irqflags.h b/include/linux/irqflags.h index 5b711d4e9fd9..2b1c2e58566e 100644 --- a/include/linux/irqflags.h +++ b/include/linux/irqflags.h @@ -41,7 +41,8 @@ # define INIT_TRACE_IRQFLAGS #endif -#ifdef CONFIG_IRQSOFF_TRACER +#if defined(CONFIG_IRQSOFF_TRACER) || \ + defined(CONFIG_PREEMPT_TRACER) extern void stop_critical_timings(void); extern void start_critical_timings(void); #else diff --git a/include/linux/preempt.h b/include/linux/preempt.h index 36b03d50bf40..72b1a10a59b6 100644 --- a/include/linux/preempt.h +++ b/include/linux/preempt.h @@ -10,7 +10,7 @@ #include #include -#ifdef CONFIG_DEBUG_PREEMPT +#if defined(CONFIG_DEBUG_PREEMPT) || defined(CONFIG_PREEMPT_TRACER) extern void add_preempt_count(int val); extern void sub_preempt_count(int val); #else diff --git a/kernel/sched.c b/kernel/sched.c index 73e600852365..328494e28df2 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -70,6 +70,7 @@ #include #include #include +#include #include #include @@ -4365,26 +4366,44 @@ void scheduler_tick(void) #endif } -#if defined(CONFIG_PREEMPT) && defined(CONFIG_DEBUG_PREEMPT) +#if defined(CONFIG_PREEMPT) && (defined(CONFIG_DEBUG_PREEMPT) || \ + defined(CONFIG_PREEMPT_TRACER)) + +static inline unsigned long get_parent_ip(unsigned long addr) +{ + if (in_lock_functions(addr)) { + addr = CALLER_ADDR2; + if (in_lock_functions(addr)) + addr = CALLER_ADDR3; + } + return addr; +} void __kprobes add_preempt_count(int val) { +#ifdef CONFIG_DEBUG_PREEMPT /* * Underflow? */ if (DEBUG_LOCKS_WARN_ON((preempt_count() < 0))) return; +#endif preempt_count() += val; +#ifdef CONFIG_DEBUG_PREEMPT /* * Spinlock count overflowing soon? */ DEBUG_LOCKS_WARN_ON((preempt_count() & PREEMPT_MASK) >= PREEMPT_MASK - 10); +#endif + if (preempt_count() == val) + trace_preempt_off(CALLER_ADDR0, get_parent_ip(CALLER_ADDR1)); } EXPORT_SYMBOL(add_preempt_count); void __kprobes sub_preempt_count(int val) { +#ifdef CONFIG_DEBUG_PREEMPT /* * Underflow? */ @@ -4396,7 +4415,10 @@ void __kprobes sub_preempt_count(int val) if (DEBUG_LOCKS_WARN_ON((val < PREEMPT_MASK) && !(preempt_count() & PREEMPT_MASK))) return; +#endif + if (preempt_count() == val) + trace_preempt_on(CALLER_ADDR0, get_parent_ip(CALLER_ADDR1)); preempt_count() -= val; } EXPORT_SYMBOL(sub_preempt_count); diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 896df1cf6adc..6430016b98e8 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -44,6 +44,31 @@ config IRQSOFF_TRACER echo 0 > /debugfs/tracing/tracing_max_latency + (Note that kernel size and overhead increases with this option + enabled. This option and the preempt-off timing option can be + used together or separately.) + +config PREEMPT_TRACER + bool "Preemption-off Latency Tracer" + default n + depends on GENERIC_TIME + depends on PREEMPT + select TRACING + select TRACER_MAX_TRACE + help + This option measures the time spent in preemption off critical + sections, with microsecond accuracy. + + The default measurement method is a maximum search, which is + disabled by default and can be runtime (re-)started + via: + + echo 0 > /debugfs/tracing/tracing_max_latency + + (Note that kernel size and overhead increases with this option + enabled. This option and the irqs-off timing option can be + used together or separately.) + config SCHED_TRACER bool "Scheduling Latency Tracer" depends on DEBUG_KERNEL diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index 46be8647fb65..3fec653d6533 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_TRACING) += trace.o obj-$(CONFIG_CONTEXT_SWITCH_TRACER) += trace_sched_switch.o obj-$(CONFIG_FTRACE) += trace_functions.o obj-$(CONFIG_IRQSOFF_TRACER) += trace_irqsoff.o +obj-$(CONFIG_PREEMPT_TRACER) += trace_irqsoff.o obj-$(CONFIG_SCHED_TRACER) += trace_sched_wakeup.o libftrace-y := ftrace.o diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index a9131b0cf1a5..8b1231633dc5 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -21,6 +21,36 @@ static struct trace_array *irqsoff_trace __read_mostly; static int tracer_enabled __read_mostly; +static DEFINE_PER_CPU(int, tracing_cpu); + +enum { + TRACER_IRQS_OFF = (1 << 1), + TRACER_PREEMPT_OFF = (1 << 2), +}; + +static int trace_type __read_mostly; + +#ifdef CONFIG_PREEMPT_TRACER +static inline int notrace +preempt_trace(void) +{ + return ((trace_type & TRACER_PREEMPT_OFF) && preempt_count()); +} +#else +# define preempt_trace() (0) +#endif + +#ifdef CONFIG_IRQSOFF_TRACER +static inline int notrace +irq_trace(void) +{ + return ((trace_type & TRACER_IRQS_OFF) && + irqs_disabled()); +} +#else +# define irq_trace() (0) +#endif + /* * Sequence count - we record it when starting a measurement and * skip the latency if the sequence has changed - some other section @@ -44,14 +74,11 @@ irqsoff_tracer_call(unsigned long ip, unsigned long parent_ip) long disabled; int cpu; - if (likely(!tracer_enabled)) + if (likely(!__get_cpu_var(tracing_cpu))) return; local_save_flags(flags); - if (!irqs_disabled_flags(flags)) - return; - cpu = raw_smp_processor_id(); data = tr->data[cpu]; disabled = atomic_inc_return(&data->disabled); @@ -171,23 +198,29 @@ start_critical_timing(unsigned long ip, unsigned long parent_ip) if (likely(!tracer_enabled)) return; + if (__get_cpu_var(tracing_cpu)) + return; + cpu = raw_smp_processor_id(); data = tr->data[cpu]; if (unlikely(!data) || unlikely(!data->trace) || - data->critical_start || atomic_read(&data->disabled)) + atomic_read(&data->disabled)) return; atomic_inc(&data->disabled); data->critical_sequence = max_sequence; data->preempt_timestamp = now(cpu); - data->critical_start = parent_ip; + data->critical_start = parent_ip ? : ip; tracing_reset(data); local_save_flags(flags); + ftrace(tr, data, ip, parent_ip, flags); + __get_cpu_var(tracing_cpu) = 1; + atomic_dec(&data->disabled); } @@ -199,7 +232,13 @@ stop_critical_timing(unsigned long ip, unsigned long parent_ip) struct trace_array_cpu *data; unsigned long flags; - if (likely(!tracer_enabled)) + /* Always clear the tracing cpu on stopping the trace */ + if (unlikely(__get_cpu_var(tracing_cpu))) + __get_cpu_var(tracing_cpu) = 0; + else + return; + + if (!tracer_enabled) return; cpu = raw_smp_processor_id(); @@ -212,49 +251,35 @@ stop_critical_timing(unsigned long ip, unsigned long parent_ip) atomic_inc(&data->disabled); local_save_flags(flags); ftrace(tr, data, ip, parent_ip, flags); - check_critical_timing(tr, data, parent_ip, cpu); + check_critical_timing(tr, data, parent_ip ? : ip, cpu); data->critical_start = 0; atomic_dec(&data->disabled); } +/* start and stop critical timings used to for stoppage (in idle) */ void notrace start_critical_timings(void) { - unsigned long flags; - - local_save_flags(flags); - - if (irqs_disabled_flags(flags)) + if (preempt_trace() || irq_trace()) start_critical_timing(CALLER_ADDR0, CALLER_ADDR1); } void notrace stop_critical_timings(void) { - unsigned long flags; - - local_save_flags(flags); - - if (irqs_disabled_flags(flags)) + if (preempt_trace() || irq_trace()) stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); } +#ifdef CONFIG_IRQSOFF_TRACER #ifdef CONFIG_PROVE_LOCKING void notrace time_hardirqs_on(unsigned long a0, unsigned long a1) { - unsigned long flags; - - local_save_flags(flags); - - if (irqs_disabled_flags(flags)) + if (!preempt_trace() && irq_trace()) stop_critical_timing(a0, a1); } void notrace time_hardirqs_off(unsigned long a0, unsigned long a1) { - unsigned long flags; - - local_save_flags(flags); - - if (irqs_disabled_flags(flags)) + if (!preempt_trace() && irq_trace()) start_critical_timing(a0, a1); } @@ -289,49 +314,46 @@ inline void print_irqtrace_events(struct task_struct *curr) */ void notrace trace_hardirqs_on(void) { - unsigned long flags; - - local_save_flags(flags); - - if (irqs_disabled_flags(flags)) + if (!preempt_trace() && irq_trace()) stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); } EXPORT_SYMBOL(trace_hardirqs_on); void notrace trace_hardirqs_off(void) { - unsigned long flags; - - local_save_flags(flags); - - if (irqs_disabled_flags(flags)) + if (!preempt_trace() && irq_trace()) start_critical_timing(CALLER_ADDR0, CALLER_ADDR1); } EXPORT_SYMBOL(trace_hardirqs_off); void notrace trace_hardirqs_on_caller(unsigned long caller_addr) { - unsigned long flags; - - local_save_flags(flags); - - if (irqs_disabled_flags(flags)) + if (!preempt_trace() && irq_trace()) stop_critical_timing(CALLER_ADDR0, caller_addr); } EXPORT_SYMBOL(trace_hardirqs_on_caller); void notrace trace_hardirqs_off_caller(unsigned long caller_addr) { - unsigned long flags; - - local_save_flags(flags); - - if (irqs_disabled_flags(flags)) + if (!preempt_trace() && irq_trace()) start_critical_timing(CALLER_ADDR0, caller_addr); } EXPORT_SYMBOL(trace_hardirqs_off_caller); #endif /* CONFIG_PROVE_LOCKING */ +#endif /* CONFIG_IRQSOFF_TRACER */ + +#ifdef CONFIG_PREEMPT_TRACER +void notrace trace_preempt_on(unsigned long a0, unsigned long a1) +{ + stop_critical_timing(a0, a1); +} + +void notrace trace_preempt_off(unsigned long a0, unsigned long a1) +{ + start_critical_timing(a0, a1); +} +#endif /* CONFIG_PREEMPT_TRACER */ static void start_irqsoff_tracer(struct trace_array *tr) { @@ -345,7 +367,7 @@ static void stop_irqsoff_tracer(struct trace_array *tr) tracer_enabled = 0; } -static void irqsoff_tracer_init(struct trace_array *tr) +static void __irqsoff_tracer_init(struct trace_array *tr) { irqsoff_trace = tr; /* make sure that the tracer is visibel */ @@ -382,6 +404,13 @@ static void notrace irqsoff_tracer_close(struct trace_iterator *iter) start_irqsoff_tracer(iter->tr); } +#ifdef CONFIG_IRQSOFF_TRACER +static void irqsoff_tracer_init(struct trace_array *tr) +{ + trace_type = TRACER_IRQS_OFF; + + __irqsoff_tracer_init(tr); +} static struct tracer irqsoff_tracer __read_mostly = { .name = "irqsoff", @@ -392,10 +421,65 @@ static struct tracer irqsoff_tracer __read_mostly = .ctrl_update = irqsoff_tracer_ctrl_update, .print_max = 1, }; +# define register_irqsoff(trace) register_tracer(&trace) +#else +# define register_irqsoff(trace) do { } while (0) +#endif + +#ifdef CONFIG_PREEMPT_TRACER +static void preemptoff_tracer_init(struct trace_array *tr) +{ + trace_type = TRACER_PREEMPT_OFF; + + __irqsoff_tracer_init(tr); +} + +static struct tracer preemptoff_tracer __read_mostly = +{ + .name = "preemptoff", + .init = preemptoff_tracer_init, + .reset = irqsoff_tracer_reset, + .open = irqsoff_tracer_open, + .close = irqsoff_tracer_close, + .ctrl_update = irqsoff_tracer_ctrl_update, + .print_max = 1, +}; +# define register_preemptoff(trace) register_tracer(&trace) +#else +# define register_preemptoff(trace) do { } while (0) +#endif + +#if defined(CONFIG_IRQSOFF_TRACER) && \ + defined(CONFIG_PREEMPT_TRACER) + +static void preemptirqsoff_tracer_init(struct trace_array *tr) +{ + trace_type = TRACER_IRQS_OFF | TRACER_PREEMPT_OFF; + + __irqsoff_tracer_init(tr); +} + +static struct tracer preemptirqsoff_tracer __read_mostly = +{ + .name = "preemptirqsoff", + .init = preemptirqsoff_tracer_init, + .reset = irqsoff_tracer_reset, + .open = irqsoff_tracer_open, + .close = irqsoff_tracer_close, + .ctrl_update = irqsoff_tracer_ctrl_update, + .print_max = 1, +}; + +# define register_preemptirqsoff(trace) register_tracer(&trace) +#else +# define register_preemptirqsoff(trace) do { } while (0) +#endif __init static int init_irqsoff_tracer(void) { - register_tracer(&irqsoff_tracer); + register_irqsoff(irqsoff_tracer); + register_preemptoff(preemptoff_tracer); + register_preemptirqsoff(preemptirqsoff_tracer); return 0; } -- cgit v1.2.3 From 3d0833953e1b98b79ddf491dd49229eef9baeac1 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:42 +0200 Subject: ftrace: dynamic enabling/disabling of function calls This patch adds a feature to dynamically replace the ftrace code with the jmps to allow a kernel with ftrace configured to run as fast as it can without it configured. The way this works, is on bootup (if ftrace is enabled), a ftrace function is registered to record the instruction pointer of all places that call the function. Later, if there's still any code to patch, a kthread is awoken (rate limited to at most once a second) that performs a stop_machine, and replaces all the code that was called with a jmp over the call to ftrace. It only replaces what was found the previous time. Typically the system reaches equilibrium quickly after bootup and there's no code patching needed at all. e.g. call ftrace /* 5 bytes */ is replaced with jmp 3f /* jmp is 2 bytes and we jump 3 forward */ 3: When we want to enable ftrace for function tracing, the IP recording is removed, and stop_machine is called again to replace all the locations of that were recorded back to the call of ftrace. When it is disabled, we replace the code back to the jmp. Allocation is done by the kthread. If the ftrace recording function is called, and we don't have any record slots available, then we simply skip that call. Once a second a new page (if needed) is allocated for recording new ftrace function calls. A large batch is allocated at boot up to get most of the calls there. Because we do this via stop_machine, we don't have to worry about another CPU executing a ftrace call as we modify it. But we do need to worry about NMI's so all functions that might be called via nmi must be annotated with notrace_nmi. When this code is configured in, the NMI code will not call notrace. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 1 + arch/x86/kernel/ftrace.c | 237 +++++++++++++++++++++++++++++++ include/linux/ftrace.h | 18 +++ kernel/trace/Kconfig | 17 +++ kernel/trace/ftrace.c | 356 ++++++++++++++++++++++++++++++++++++++++++----- 5 files changed, 597 insertions(+), 32 deletions(-) create mode 100644 arch/x86/kernel/ftrace.c diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..e142091524b0 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -56,6 +56,7 @@ obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o obj-$(CONFIG_X86_IO_APIC) += io_apic_$(BITS).o obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o +obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o obj-$(CONFIG_KEXEC) += relocate_kernel_$(BITS).o crash.o obj-$(CONFIG_CRASH_DUMP) += crash_dump_$(BITS).o diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c new file mode 100644 index 000000000000..5dd58136ef02 --- /dev/null +++ b/arch/x86/kernel/ftrace.c @@ -0,0 +1,237 @@ +/* + * Code for replacing ftrace calls with jumps. + * + * Copyright (C) 2007-2008 Steven Rostedt + * + * Thanks goes to Ingo Molnar, for suggesting the idea. + * Mathieu Desnoyers, for suggesting postponing the modifications. + * Arjan van de Ven, for keeping me straight, and explaining to me + * the dangers of modifying code on the run. + */ + +#include +#include +#include +#include +#include +#include + +#define CALL_BACK 5 + +#define JMPFWD 0x03eb + +static unsigned short ftrace_jmp = JMPFWD; + +struct ftrace_record { + struct dyn_ftrace rec; + int failed; +} __attribute__((packed)); + +struct ftrace_page { + struct ftrace_page *next; + int index; + struct ftrace_record records[]; +} __attribute__((packed)); + +#define ENTRIES_PER_PAGE \ + ((PAGE_SIZE - sizeof(struct ftrace_page)) / sizeof(struct ftrace_record)) + +/* estimate from running different kernels */ +#define NR_TO_INIT 10000 + +#define MCOUNT_ADDR ((long)(&mcount)) + +union ftrace_code_union { + char code[5]; + struct { + char e8; + int offset; + } __attribute__((packed)); +}; + +static struct ftrace_page *ftrace_pages_start; +static struct ftrace_page *ftrace_pages; + +notrace struct dyn_ftrace *ftrace_alloc_shutdown_node(unsigned long ip) +{ + struct ftrace_record *rec; + unsigned short save; + + ip -= CALL_BACK; + save = *(short *)ip; + + /* If this was already converted, skip it */ + if (save == JMPFWD) + return NULL; + + if (ftrace_pages->index == ENTRIES_PER_PAGE) { + if (!ftrace_pages->next) + return NULL; + ftrace_pages = ftrace_pages->next; + } + + rec = &ftrace_pages->records[ftrace_pages->index++]; + + return &rec->rec; +} + +static int notrace +ftrace_modify_code(unsigned long ip, unsigned char *old_code, + unsigned char *new_code) +{ + unsigned short old = *(unsigned short *)old_code; + unsigned short new = *(unsigned short *)new_code; + unsigned short replaced; + int faulted = 0; + + /* + * Note: Due to modules and __init, code can + * disappear and change, we need to protect against faulting + * as well as code changing. + * + * No real locking needed, this code is run through + * kstop_machine. + */ + asm volatile ( + "1: lock\n" + " cmpxchg %w3, (%2)\n" + "2:\n" + ".section .fixup, \"ax\"\n" + " movl $1, %0\n" + "3: jmp 2b\n" + ".previous\n" + _ASM_EXTABLE(1b, 3b) + : "=r"(faulted), "=a"(replaced) + : "r"(ip), "r"(new), "0"(faulted), "a"(old) + : "memory"); + sync_core(); + + if (replaced != old) + faulted = 2; + + return faulted; +} + +static int notrace ftrace_calc_offset(long ip) +{ + return (int)(MCOUNT_ADDR - ip); +} + +notrace void ftrace_code_disable(struct dyn_ftrace *rec) +{ + unsigned long ip; + union ftrace_code_union save; + struct ftrace_record *r = + container_of(rec, struct ftrace_record, rec); + + ip = rec->ip; + + save.e8 = 0xe8; + save.offset = ftrace_calc_offset(ip); + + /* move the IP back to the start of the call */ + ip -= CALL_BACK; + + r->failed = ftrace_modify_code(ip, save.code, (char *)&ftrace_jmp); +} + +static void notrace ftrace_replace_code(int saved) +{ + unsigned char *new = NULL, *old = NULL; + struct ftrace_record *rec; + struct ftrace_page *pg; + unsigned long ip; + int i; + + if (saved) + old = (char *)&ftrace_jmp; + else + new = (char *)&ftrace_jmp; + + for (pg = ftrace_pages_start; pg; pg = pg->next) { + for (i = 0; i < pg->index; i++) { + union ftrace_code_union calc; + rec = &pg->records[i]; + + /* don't modify code that has already faulted */ + if (rec->failed) + continue; + + ip = rec->rec.ip; + + calc.e8 = 0xe8; + calc.offset = ftrace_calc_offset(ip); + + if (saved) + new = calc.code; + else + old = calc.code; + + ip -= CALL_BACK; + + rec->failed = ftrace_modify_code(ip, old, new); + } + } + +} + +notrace void ftrace_startup_code(void) +{ + ftrace_replace_code(1); +} + +notrace void ftrace_shutdown_code(void) +{ + ftrace_replace_code(0); +} + +notrace void ftrace_shutdown_replenish(void) +{ + if (ftrace_pages->next) + return; + + /* allocate another page */ + ftrace_pages->next = (void *)get_zeroed_page(GFP_KERNEL); +} + +notrace int ftrace_shutdown_arch_init(void) +{ + struct ftrace_page *pg; + int cnt; + int i; + + /* allocate a few pages */ + ftrace_pages_start = (void *)get_zeroed_page(GFP_KERNEL); + if (!ftrace_pages_start) + return -1; + + /* + * Allocate a few more pages. + * + * TODO: have some parser search vmlinux before + * final linking to find all calls to ftrace. + * Then we can: + * a) know how many pages to allocate. + * and/or + * b) set up the table then. + * + * The dynamic code is still necessary for + * modules. + */ + + pg = ftrace_pages = ftrace_pages_start; + + cnt = NR_TO_INIT / ENTRIES_PER_PAGE; + + for (i = 0; i < cnt; i++) { + pg->next = (void *)get_zeroed_page(GFP_KERNEL); + + /* If we fail, we'll try later anyway */ + if (!pg->next) + break; + + pg = pg->next; + } + + return 0; +} diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 740c97dcf9cb..90dbc0ee2046 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -32,6 +32,24 @@ extern void mcount(void); # define clear_ftrace_function(ops) do { } while (0) #endif /* CONFIG_FTRACE */ +#ifdef CONFIG_DYNAMIC_FTRACE +# define FTRACE_HASHBITS 10 +# define FTRACE_HASHSIZE (1< +#include +#include +#include +#include +#include #include +#include +#include +#include + +#include "trace.h" -static DEFINE_SPINLOCK(ftrace_func_lock); +static DEFINE_SPINLOCK(ftrace_lock); static struct ftrace_ops ftrace_list_end __read_mostly = { .func = ftrace_stub, @@ -44,21 +53,21 @@ notrace void ftrace_list_func(unsigned long ip, unsigned long parent_ip) } /** - * register_ftrace_function - register a function for profiling - * @ops - ops structure that holds the function for profiling. - * - * Register a function to be called by all functions in the - * kernel. + * clear_ftrace_function - reset the ftrace function * - * Note: @ops->func and all the functions it calls must be labeled - * with "notrace", otherwise it will go into a - * recursive loop. + * This NULLs the ftrace function and in essence stops + * tracing. There may be lag */ -int register_ftrace_function(struct ftrace_ops *ops) +void clear_ftrace_function(void) { - unsigned long flags; + ftrace_trace_function = ftrace_stub; +} + +static int notrace __register_ftrace_function(struct ftrace_ops *ops) +{ + /* Should never be called by interrupts */ + spin_lock(&ftrace_lock); - spin_lock_irqsave(&ftrace_func_lock, flags); ops->next = ftrace_list; /* * We are entering ops into the ftrace_list but another @@ -68,6 +77,7 @@ int register_ftrace_function(struct ftrace_ops *ops) */ smp_wmb(); ftrace_list = ops; + /* * For one func, simply call it directly. * For more than one func, call the chain. @@ -76,28 +86,22 @@ int register_ftrace_function(struct ftrace_ops *ops) ftrace_trace_function = ops->func; else ftrace_trace_function = ftrace_list_func; - spin_unlock_irqrestore(&ftrace_func_lock, flags); + + spin_unlock(&ftrace_lock); return 0; } -/** - * unregister_ftrace_function - unresgister a function for profiling. - * @ops - ops structure that holds the function to unregister - * - * Unregister a function that was added to be called by ftrace profiling. - */ -int unregister_ftrace_function(struct ftrace_ops *ops) +static int notrace __unregister_ftrace_function(struct ftrace_ops *ops) { - unsigned long flags; struct ftrace_ops **p; int ret = 0; - spin_lock_irqsave(&ftrace_func_lock, flags); + spin_lock(&ftrace_lock); /* - * If we are the only function, then the ftrace pointer is - * pointing directly to that function. + * If we are removing the last function, then simply point + * to the ftrace_stub. */ if (ftrace_list == ops && ops->next == &ftrace_list_end) { ftrace_trace_function = ftrace_stub; @@ -117,22 +121,310 @@ int unregister_ftrace_function(struct ftrace_ops *ops) *p = (*p)->next; /* If we only have one func left, then call that directly */ - if (ftrace_list->next == &ftrace_list_end) + if (ftrace_list == &ftrace_list_end || + ftrace_list->next == &ftrace_list_end) ftrace_trace_function = ftrace_list->func; out: - spin_unlock_irqrestore(&ftrace_func_lock, flags); + spin_unlock(&ftrace_lock); + + return ret; +} + +#ifdef CONFIG_DYNAMIC_FTRACE + +static struct hlist_head ftrace_hash[FTRACE_HASHSIZE]; + +static DEFINE_PER_CPU(int, ftrace_shutdown_disable_cpu); + +static DEFINE_SPINLOCK(ftrace_shutdown_lock); +static DEFINE_MUTEX(ftraced_lock); + +static int ftraced_trigger; +static int ftraced_suspend; + +static int ftrace_record_suspend; + +static inline int +notrace ftrace_ip_in_hash(unsigned long ip, unsigned long key) +{ + struct dyn_ftrace *p; + struct hlist_node *t; + int found = 0; + + hlist_for_each_entry(p, t, &ftrace_hash[key], node) { + if (p->ip == ip) { + found = 1; + break; + } + } + + return found; +} + +static inline void notrace +ftrace_add_hash(struct dyn_ftrace *node, unsigned long key) +{ + hlist_add_head(&node->node, &ftrace_hash[key]); +} + +static void notrace +ftrace_record_ip(unsigned long ip, unsigned long parent_ip) +{ + struct dyn_ftrace *node; + unsigned long flags; + unsigned long key; + int resched; + int atomic; + + resched = need_resched(); + preempt_disable_notrace(); + + /* We simply need to protect against recursion */ + __get_cpu_var(ftrace_shutdown_disable_cpu)++; + if (__get_cpu_var(ftrace_shutdown_disable_cpu) != 1) + goto out; + + if (unlikely(ftrace_record_suspend)) + goto out; + + key = hash_long(ip, FTRACE_HASHBITS); + + WARN_ON_ONCE(key >= FTRACE_HASHSIZE); + + if (ftrace_ip_in_hash(ip, key)) + goto out; + + atomic = irqs_disabled(); + + spin_lock_irqsave(&ftrace_shutdown_lock, flags); + + /* This ip may have hit the hash before the lock */ + if (ftrace_ip_in_hash(ip, key)) + goto out_unlock; + + /* + * There's a slight race that the ftraced will update the + * hash and reset here. The arch alloc is responsible + * for seeing if the IP has already changed, and if + * it has, the alloc will fail. + */ + node = ftrace_alloc_shutdown_node(ip); + if (!node) + goto out_unlock; + + node->ip = ip; + + ftrace_add_hash(node, key); + + ftraced_trigger = 1; + + out_unlock: + spin_unlock_irqrestore(&ftrace_shutdown_lock, flags); + out: + __get_cpu_var(ftrace_shutdown_disable_cpu)--; + + /* prevent recursion with scheduler */ + if (resched) + preempt_enable_no_resched_notrace(); + else + preempt_enable_notrace(); +} + +static struct ftrace_ops ftrace_shutdown_ops __read_mostly = +{ + .func = ftrace_record_ip, +}; + + +static int notrace __ftrace_modify_code(void *data) +{ + void (*func)(void) = data; + + func(); + return 0; +} + +static void notrace ftrace_run_startup_code(void) +{ + stop_machine_run(__ftrace_modify_code, ftrace_startup_code, NR_CPUS); +} + +static void notrace ftrace_run_shutdown_code(void) +{ + stop_machine_run(__ftrace_modify_code, ftrace_shutdown_code, NR_CPUS); +} + +static void notrace ftrace_startup(void) +{ + mutex_lock(&ftraced_lock); + ftraced_suspend++; + if (ftraced_suspend != 1) + goto out; + __unregister_ftrace_function(&ftrace_shutdown_ops); + + ftrace_run_startup_code(); + out: + mutex_unlock(&ftraced_lock); +} + +static void notrace ftrace_shutdown(void) +{ + mutex_lock(&ftraced_lock); + ftraced_suspend--; + if (ftraced_suspend) + goto out; + + ftrace_run_shutdown_code(); + + __register_ftrace_function(&ftrace_shutdown_ops); + out: + mutex_unlock(&ftraced_lock); +} + +static cycle_t ftrace_update_time; +static unsigned long ftrace_update_cnt; +unsigned long ftrace_update_tot_cnt; + +static int notrace __ftrace_update_code(void *ignore) +{ + struct dyn_ftrace *p; + struct hlist_head head; + struct hlist_node *t; + cycle_t start, stop; + int i; + + /* Don't be calling ftrace ops now */ + __unregister_ftrace_function(&ftrace_shutdown_ops); + + start = now(raw_smp_processor_id()); + ftrace_update_cnt = 0; + + /* No locks needed, the machine is stopped! */ + for (i = 0; i < FTRACE_HASHSIZE; i++) { + if (hlist_empty(&ftrace_hash[i])) + continue; + + head = ftrace_hash[i]; + INIT_HLIST_HEAD(&ftrace_hash[i]); + + /* all CPUS are stopped, we are safe to modify code */ + hlist_for_each_entry(p, t, &head, node) { + ftrace_code_disable(p); + ftrace_update_cnt++; + } + + } + + stop = now(raw_smp_processor_id()); + ftrace_update_time = stop - start; + ftrace_update_tot_cnt += ftrace_update_cnt; + + __register_ftrace_function(&ftrace_shutdown_ops); return 0; } +static void notrace ftrace_update_code(void) +{ + stop_machine_run(__ftrace_update_code, NULL, NR_CPUS); +} + +static int notrace ftraced(void *ignore) +{ + unsigned long usecs; + + set_current_state(TASK_INTERRUPTIBLE); + + while (!kthread_should_stop()) { + + /* check once a second */ + schedule_timeout(HZ); + + mutex_lock(&ftraced_lock); + if (ftraced_trigger && !ftraced_suspend) { + ftrace_record_suspend++; + ftrace_update_code(); + usecs = nsecs_to_usecs(ftrace_update_time); + if (ftrace_update_tot_cnt > 100000) { + ftrace_update_tot_cnt = 0; + pr_info("hm, dftrace overflow: %lu change%s" + " (%lu total) in %lu usec%s\n", + ftrace_update_cnt, + ftrace_update_cnt != 1 ? "s" : "", + ftrace_update_tot_cnt, + usecs, usecs != 1 ? "s" : ""); + WARN_ON_ONCE(1); + } + ftraced_trigger = 0; + ftrace_record_suspend--; + } + mutex_unlock(&ftraced_lock); + + ftrace_shutdown_replenish(); + + set_current_state(TASK_INTERRUPTIBLE); + } + __set_current_state(TASK_RUNNING); + return 0; +} + +static int __init notrace ftrace_shutdown_init(void) +{ + struct task_struct *p; + int ret; + + ret = ftrace_shutdown_arch_init(); + if (ret) + return ret; + + p = kthread_run(ftraced, NULL, "ftraced"); + if (IS_ERR(p)) + return -1; + + __register_ftrace_function(&ftrace_shutdown_ops); + + return 0; +} + +core_initcall(ftrace_shutdown_init); +#else +# define ftrace_startup() do { } while (0) +# define ftrace_shutdown() do { } while (0) +#endif /* CONFIG_DYNAMIC_FTRACE */ + /** - * clear_ftrace_function - reset the ftrace function + * register_ftrace_function - register a function for profiling + * @ops - ops structure that holds the function for profiling. * - * This NULLs the ftrace function and in essence stops - * tracing. There may be lag + * Register a function to be called by all functions in the + * kernel. + * + * Note: @ops->func and all the functions it calls must be labeled + * with "notrace", otherwise it will go into a + * recursive loop. */ -void clear_ftrace_function(void) +int register_ftrace_function(struct ftrace_ops *ops) { - ftrace_trace_function = ftrace_stub; + ftrace_startup(); + + return __register_ftrace_function(ops); +} + +/** + * unregister_ftrace_function - unresgister a function for profiling. + * @ops - ops structure that holds the function to unregister + * + * Unregister a function that was added to be called by ftrace profiling. + */ +int unregister_ftrace_function(struct ftrace_ops *ops) +{ + int ret; + + ret = __unregister_ftrace_function(ops); + + if (ftrace_list == &ftrace_list_end) + ftrace_shutdown(); + + return ret; } -- cgit v1.2.3 From b0fc494fae96a7089f3651cb451f461c7291244c Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:43 +0200 Subject: ftrace: add ftrace_enabled sysctl to disable mcount function This patch adds back the sysctl ftrace_enabled. This time it is defaulted to on, if DYNAMIC_FTRACE is configured. When ftrace_enabled is disabled, the ftrace function is set to the stub return. If DYNAMIC_FTRACE is also configured, on ftrace_enabled = 0, the registered ftrace functions will all be set to jmps, but no more new calls to ftrace recording (used to find the ftrace calling sites) will be called. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 6 +++ kernel/sysctl.c | 11 +++++ kernel/trace/ftrace.c | 125 ++++++++++++++++++++++++++++++++++++++++++------- 3 files changed, 124 insertions(+), 18 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 90dbc0ee2046..ccd8537dbdb7 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -5,6 +5,12 @@ #include +extern int ftrace_enabled; +extern int +ftrace_enable_sysctl(struct ctl_table *table, int write, + struct file *filp, void __user *buffer, size_t *lenp, + loff_t *ppos); + typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip); struct ftrace_ops { diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 29116652dca8..efaf7c5500e9 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include @@ -455,6 +456,16 @@ static struct ctl_table kern_table[] = { .mode = 0644, .proc_handler = &proc_dointvec, }, +#ifdef CONFIG_FTRACE + { + .ctl_name = CTL_UNNUMBERED, + .procname = "ftrace_enabled", + .data = &ftrace_enabled, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &ftrace_enable_sysctl, + }, +#endif #ifdef CONFIG_KMOD { .ctl_name = KERN_MODPROBE, diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index d1ae2ba25274..d3de37299ba4 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -20,12 +20,24 @@ #include #include #include +#include #include #include #include "trace.h" +#ifdef CONFIG_DYNAMIC_FTRACE +# define FTRACE_ENABLED_INIT 1 +#else +# define FTRACE_ENABLED_INIT 0 +#endif + +int ftrace_enabled = FTRACE_ENABLED_INIT; +static int last_ftrace_enabled = FTRACE_ENABLED_INIT; + static DEFINE_SPINLOCK(ftrace_lock); +static DEFINE_MUTEX(ftrace_sysctl_lock); + static struct ftrace_ops ftrace_list_end __read_mostly = { .func = ftrace_stub, @@ -78,14 +90,16 @@ static int notrace __register_ftrace_function(struct ftrace_ops *ops) smp_wmb(); ftrace_list = ops; - /* - * For one func, simply call it directly. - * For more than one func, call the chain. - */ - if (ops->next == &ftrace_list_end) - ftrace_trace_function = ops->func; - else - ftrace_trace_function = ftrace_list_func; + if (ftrace_enabled) { + /* + * For one func, simply call it directly. + * For more than one func, call the chain. + */ + if (ops->next == &ftrace_list_end) + ftrace_trace_function = ops->func; + else + ftrace_trace_function = ftrace_list_func; + } spin_unlock(&ftrace_lock); @@ -120,10 +134,12 @@ static int notrace __unregister_ftrace_function(struct ftrace_ops *ops) *p = (*p)->next; - /* If we only have one func left, then call that directly */ - if (ftrace_list == &ftrace_list_end || - ftrace_list->next == &ftrace_list_end) - ftrace_trace_function = ftrace_list->func; + if (ftrace_enabled) { + /* If we only have one func left, then call that directly */ + if (ftrace_list == &ftrace_list_end || + ftrace_list->next == &ftrace_list_end) + ftrace_trace_function = ftrace_list->func; + } out: spin_unlock(&ftrace_lock); @@ -263,7 +279,8 @@ static void notrace ftrace_startup(void) goto out; __unregister_ftrace_function(&ftrace_shutdown_ops); - ftrace_run_startup_code(); + if (ftrace_enabled) + ftrace_run_startup_code(); out: mutex_unlock(&ftraced_lock); } @@ -275,13 +292,32 @@ static void notrace ftrace_shutdown(void) if (ftraced_suspend) goto out; - ftrace_run_shutdown_code(); + if (ftrace_enabled) + ftrace_run_shutdown_code(); __register_ftrace_function(&ftrace_shutdown_ops); out: mutex_unlock(&ftraced_lock); } +static void notrace ftrace_startup_sysctl(void) +{ + mutex_lock(&ftraced_lock); + /* ftraced_suspend is true if we want ftrace running */ + if (ftraced_suspend) + ftrace_run_startup_code(); + mutex_unlock(&ftraced_lock); +} + +static void notrace ftrace_shutdown_sysctl(void) +{ + mutex_lock(&ftraced_lock); + /* ftraced_suspend is true if ftrace is running */ + if (ftraced_suspend) + ftrace_run_shutdown_code(); + mutex_unlock(&ftraced_lock); +} + static cycle_t ftrace_update_time; static unsigned long ftrace_update_cnt; unsigned long ftrace_update_tot_cnt; @@ -341,8 +377,9 @@ static int notrace ftraced(void *ignore) /* check once a second */ schedule_timeout(HZ); + mutex_lock(&ftrace_sysctl_lock); mutex_lock(&ftraced_lock); - if (ftraced_trigger && !ftraced_suspend) { + if (ftrace_enabled && ftraced_trigger && !ftraced_suspend) { ftrace_record_suspend++; ftrace_update_code(); usecs = nsecs_to_usecs(ftrace_update_time); @@ -360,6 +397,7 @@ static int notrace ftraced(void *ignore) ftrace_record_suspend--; } mutex_unlock(&ftraced_lock); + mutex_unlock(&ftrace_sysctl_lock); ftrace_shutdown_replenish(); @@ -389,8 +427,10 @@ static int __init notrace ftrace_shutdown_init(void) core_initcall(ftrace_shutdown_init); #else -# define ftrace_startup() do { } while (0) -# define ftrace_shutdown() do { } while (0) +# define ftrace_startup() do { } while (0) +# define ftrace_shutdown() do { } while (0) +# define ftrace_startup_sysctl() do { } while (0) +# define ftrace_shutdown_sysctl() do { } while (0) #endif /* CONFIG_DYNAMIC_FTRACE */ /** @@ -406,9 +446,15 @@ core_initcall(ftrace_shutdown_init); */ int register_ftrace_function(struct ftrace_ops *ops) { + int ret; + + mutex_lock(&ftrace_sysctl_lock); ftrace_startup(); - return __register_ftrace_function(ops); + ret = __register_ftrace_function(ops); + mutex_unlock(&ftrace_sysctl_lock); + + return ret; } /** @@ -421,10 +467,53 @@ int unregister_ftrace_function(struct ftrace_ops *ops) { int ret; + mutex_lock(&ftrace_sysctl_lock); ret = __unregister_ftrace_function(ops); if (ftrace_list == &ftrace_list_end) ftrace_shutdown(); + mutex_unlock(&ftrace_sysctl_lock); + + return ret; +} + +notrace int +ftrace_enable_sysctl(struct ctl_table *table, int write, + struct file *filp, void __user *buffer, size_t *lenp, + loff_t *ppos) +{ + int ret; + + mutex_lock(&ftrace_sysctl_lock); + + ret = proc_dointvec(table, write, filp, buffer, lenp, ppos); + + if (ret || !write || (last_ftrace_enabled == ftrace_enabled)) + goto out; + + last_ftrace_enabled = ftrace_enabled; + + if (ftrace_enabled) { + + ftrace_startup_sysctl(); + + /* we are starting ftrace again */ + if (ftrace_list != &ftrace_list_end) { + if (ftrace_list->next == &ftrace_list_end) + ftrace_trace_function = ftrace_list->func; + else + ftrace_trace_function = ftrace_list_func; + } + + } else { + /* stopping ftrace calls (just send to ftrace_stub) */ + ftrace_trace_function = ftrace_stub; + + ftrace_shutdown_sysctl(); + } + + out: + mutex_unlock(&ftrace_sysctl_lock); return ret; } -- cgit v1.2.3 From dfa60aba04dae7833d75b2e2be124bb7cfb8239f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:43 +0200 Subject: ftrace: use nops instead of jmp This patch patches the call to mcount with nops instead of a jmp over the mcount call. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/alternative.c | 4 ++-- arch/x86/kernel/ftrace.c | 40 ++++++++++++++++++++++++---------------- include/asm-x86/alternative.h | 2 ++ 3 files changed, 28 insertions(+), 18 deletions(-) diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 65c7857a90dd..de240ba2e288 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -143,7 +143,7 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = { #ifdef CONFIG_X86_64 extern char __vsyscall_0; -static inline const unsigned char*const * find_nop_table(void) +const unsigned char *const *find_nop_table(void) { return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL || boot_cpu_data.x86 < 6 ? k8_nops : p6_nops; @@ -162,7 +162,7 @@ static const struct nop { { -1, NULL } }; -static const unsigned char*const * find_nop_table(void) +const unsigned char *const *find_nop_table(void) { const unsigned char *const *noptable = intel_nops; int i; diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 5dd58136ef02..2e060c58b860 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -16,11 +16,12 @@ #include #include -#define CALL_BACK 5 +#include -#define JMPFWD 0x03eb +#define CALL_BACK 5 -static unsigned short ftrace_jmp = JMPFWD; +/* Long is fine, even if it is only 4 bytes ;-) */ +static long *ftrace_nop; struct ftrace_record { struct dyn_ftrace rec; @@ -55,13 +56,13 @@ static struct ftrace_page *ftrace_pages; notrace struct dyn_ftrace *ftrace_alloc_shutdown_node(unsigned long ip) { struct ftrace_record *rec; - unsigned short save; + unsigned long save; ip -= CALL_BACK; - save = *(short *)ip; + save = *(long *)ip; /* If this was already converted, skip it */ - if (save == JMPFWD) + if (save == *ftrace_nop) return NULL; if (ftrace_pages->index == ENTRIES_PER_PAGE) { @@ -79,9 +80,10 @@ static int notrace ftrace_modify_code(unsigned long ip, unsigned char *old_code, unsigned char *new_code) { - unsigned short old = *(unsigned short *)old_code; - unsigned short new = *(unsigned short *)new_code; - unsigned short replaced; + unsigned replaced; + unsigned old = *(unsigned *)old_code; /* 4 bytes */ + unsigned new = *(unsigned *)new_code; /* 4 bytes */ + unsigned char newch = new_code[4]; int faulted = 0; /* @@ -94,7 +96,9 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, */ asm volatile ( "1: lock\n" - " cmpxchg %w3, (%2)\n" + " cmpxchg %3, (%2)\n" + " jnz 2f\n" + " movb %b4, 4(%2)\n" "2:\n" ".section .fixup, \"ax\"\n" " movl $1, %0\n" @@ -102,11 +106,12 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, ".previous\n" _ASM_EXTABLE(1b, 3b) : "=r"(faulted), "=a"(replaced) - : "r"(ip), "r"(new), "0"(faulted), "a"(old) + : "r"(ip), "r"(new), "r"(newch), + "0"(faulted), "a"(old) : "memory"); sync_core(); - if (replaced != old) + if (replaced != old && replaced != new) faulted = 2; return faulted; @@ -132,7 +137,7 @@ notrace void ftrace_code_disable(struct dyn_ftrace *rec) /* move the IP back to the start of the call */ ip -= CALL_BACK; - r->failed = ftrace_modify_code(ip, save.code, (char *)&ftrace_jmp); + r->failed = ftrace_modify_code(ip, save.code, (char *)ftrace_nop); } static void notrace ftrace_replace_code(int saved) @@ -144,9 +149,9 @@ static void notrace ftrace_replace_code(int saved) int i; if (saved) - old = (char *)&ftrace_jmp; + old = (char *)ftrace_nop; else - new = (char *)&ftrace_jmp; + new = (char *)ftrace_nop; for (pg = ftrace_pages_start; pg; pg = pg->next) { for (i = 0; i < pg->index; i++) { @@ -194,12 +199,15 @@ notrace void ftrace_shutdown_replenish(void) ftrace_pages->next = (void *)get_zeroed_page(GFP_KERNEL); } -notrace int ftrace_shutdown_arch_init(void) +notrace int __init ftrace_shutdown_arch_init(void) { + const unsigned char *const *noptable = find_nop_table(); struct ftrace_page *pg; int cnt; int i; + ftrace_nop = (unsigned long *)noptable[CALL_BACK]; + /* allocate a few pages */ ftrace_pages_start = (void *)get_zeroed_page(GFP_KERNEL); if (!ftrace_pages_start) diff --git a/include/asm-x86/alternative.h b/include/asm-x86/alternative.h index 1f6a9ca10126..f6aa18eadf71 100644 --- a/include/asm-x86/alternative.h +++ b/include/asm-x86/alternative.h @@ -72,6 +72,8 @@ static inline void alternatives_smp_module_del(struct module *mod) {} static inline void alternatives_smp_switch(int smp) {} #endif /* CONFIG_SMP */ +const unsigned char *const *find_nop_table(void); + /* * Alternative instructions for different CPU types or capabilities. * -- cgit v1.2.3 From 3c1720f00bb619302ba19d55986ab565e74d06db Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:43 +0200 Subject: ftrace: move memory management out of arch code This patch moves the memory management of the ftrace records out of the arch code and into the generic code making the arch code simpler. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/ftrace.c | 183 ++++++++--------------------------------------- include/linux/ftrace.h | 18 +++-- kernel/trace/ftrace.c | 154 ++++++++++++++++++++++++++++++++++++++- 3 files changed, 192 insertions(+), 163 deletions(-) diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 2e060c58b860..b69795efa226 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -23,25 +23,6 @@ /* Long is fine, even if it is only 4 bytes ;-) */ static long *ftrace_nop; -struct ftrace_record { - struct dyn_ftrace rec; - int failed; -} __attribute__((packed)); - -struct ftrace_page { - struct ftrace_page *next; - int index; - struct ftrace_record records[]; -} __attribute__((packed)); - -#define ENTRIES_PER_PAGE \ - ((PAGE_SIZE - sizeof(struct ftrace_page)) / sizeof(struct ftrace_record)) - -/* estimate from running different kernels */ -#define NR_TO_INIT 10000 - -#define MCOUNT_ADDR ((long)(&mcount)) - union ftrace_code_union { char code[5]; struct { @@ -50,33 +31,41 @@ union ftrace_code_union { } __attribute__((packed)); }; -static struct ftrace_page *ftrace_pages_start; -static struct ftrace_page *ftrace_pages; - -notrace struct dyn_ftrace *ftrace_alloc_shutdown_node(unsigned long ip) +notrace int ftrace_ip_converted(unsigned long ip) { - struct ftrace_record *rec; unsigned long save; ip -= CALL_BACK; save = *(long *)ip; - /* If this was already converted, skip it */ - if (save == *ftrace_nop) - return NULL; + return save == *ftrace_nop; +} - if (ftrace_pages->index == ENTRIES_PER_PAGE) { - if (!ftrace_pages->next) - return NULL; - ftrace_pages = ftrace_pages->next; - } +static int notrace ftrace_calc_offset(long ip, long addr) +{ + return (int)(addr - ip); +} - rec = &ftrace_pages->records[ftrace_pages->index++]; +notrace unsigned char *ftrace_nop_replace(void) +{ + return (char *)ftrace_nop; +} + +notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) +{ + static union ftrace_code_union calc; - return &rec->rec; + calc.e8 = 0xe8; + calc.offset = ftrace_calc_offset(ip, addr); + + /* + * No locking needed, this must be called via kstop_machine + * which in essence is like running on a uniprocessor machine. + */ + return calc.code; } -static int notrace +notrace int ftrace_modify_code(unsigned long ip, unsigned char *old_code, unsigned char *new_code) { @@ -86,6 +75,9 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, unsigned char newch = new_code[4]; int faulted = 0; + /* move the IP back to the start of the call */ + ip -= CALL_BACK; + /* * Note: Due to modules and __init, code can * disappear and change, we need to protect against faulting @@ -117,129 +109,12 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, return faulted; } -static int notrace ftrace_calc_offset(long ip) -{ - return (int)(MCOUNT_ADDR - ip); -} - -notrace void ftrace_code_disable(struct dyn_ftrace *rec) -{ - unsigned long ip; - union ftrace_code_union save; - struct ftrace_record *r = - container_of(rec, struct ftrace_record, rec); - - ip = rec->ip; - - save.e8 = 0xe8; - save.offset = ftrace_calc_offset(ip); - - /* move the IP back to the start of the call */ - ip -= CALL_BACK; - - r->failed = ftrace_modify_code(ip, save.code, (char *)ftrace_nop); -} - -static void notrace ftrace_replace_code(int saved) -{ - unsigned char *new = NULL, *old = NULL; - struct ftrace_record *rec; - struct ftrace_page *pg; - unsigned long ip; - int i; - - if (saved) - old = (char *)ftrace_nop; - else - new = (char *)ftrace_nop; - - for (pg = ftrace_pages_start; pg; pg = pg->next) { - for (i = 0; i < pg->index; i++) { - union ftrace_code_union calc; - rec = &pg->records[i]; - - /* don't modify code that has already faulted */ - if (rec->failed) - continue; - - ip = rec->rec.ip; - - calc.e8 = 0xe8; - calc.offset = ftrace_calc_offset(ip); - - if (saved) - new = calc.code; - else - old = calc.code; - - ip -= CALL_BACK; - - rec->failed = ftrace_modify_code(ip, old, new); - } - } - -} - -notrace void ftrace_startup_code(void) -{ - ftrace_replace_code(1); -} - -notrace void ftrace_shutdown_code(void) -{ - ftrace_replace_code(0); -} - -notrace void ftrace_shutdown_replenish(void) -{ - if (ftrace_pages->next) - return; - - /* allocate another page */ - ftrace_pages->next = (void *)get_zeroed_page(GFP_KERNEL); -} - -notrace int __init ftrace_shutdown_arch_init(void) +int __init ftrace_dyn_arch_init(void) { const unsigned char *const *noptable = find_nop_table(); - struct ftrace_page *pg; - int cnt; - int i; ftrace_nop = (unsigned long *)noptable[CALL_BACK]; - /* allocate a few pages */ - ftrace_pages_start = (void *)get_zeroed_page(GFP_KERNEL); - if (!ftrace_pages_start) - return -1; - - /* - * Allocate a few more pages. - * - * TODO: have some parser search vmlinux before - * final linking to find all calls to ftrace. - * Then we can: - * a) know how many pages to allocate. - * and/or - * b) set up the table then. - * - * The dynamic code is still necessary for - * modules. - */ - - pg = ftrace_pages = ftrace_pages_start; - - cnt = NR_TO_INIT / ENTRIES_PER_PAGE; - - for (i = 0; i < cnt; i++) { - pg->next = (void *)get_zeroed_page(GFP_KERNEL); - - /* If we fail, we'll try later anyway */ - if (!pg->next) - break; - - pg = pg->next; - } - return 0; } + diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index ccd8537dbdb7..d509ad6c9cb8 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -42,19 +42,23 @@ extern void mcount(void); # define FTRACE_HASHBITS 10 # define FTRACE_HASHSIZE (1<node, &ftrace_hash[key]); } +static notrace struct dyn_ftrace *ftrace_alloc_shutdown_node(unsigned long ip) +{ + /* If this was already converted, skip it */ + if (ftrace_ip_converted(ip)) + return NULL; + + if (ftrace_pages->index == ENTRIES_PER_PAGE) { + if (!ftrace_pages->next) + return NULL; + ftrace_pages = ftrace_pages->next; + } + + return &ftrace_pages->records[ftrace_pages->index++]; +} + static void notrace ftrace_record_ip(unsigned long ip, unsigned long parent_ip) { @@ -252,6 +282,62 @@ static struct ftrace_ops ftrace_shutdown_ops __read_mostly = .func = ftrace_record_ip, }; +#define MCOUNT_ADDR ((long)(&mcount)) + +static void notrace ftrace_replace_code(int saved) +{ + unsigned char *new = NULL, *old = NULL; + struct dyn_ftrace *rec; + struct ftrace_page *pg; + unsigned long ip; + int failed; + int i; + + if (saved) + old = ftrace_nop_replace(); + else + new = ftrace_nop_replace(); + + for (pg = ftrace_pages_start; pg; pg = pg->next) { + for (i = 0; i < pg->index; i++) { + rec = &pg->records[i]; + + /* don't modify code that has already faulted */ + if (rec->flags & FTRACE_FL_FAILED) + continue; + + ip = rec->ip; + + if (saved) + new = ftrace_call_replace(ip, MCOUNT_ADDR); + else + old = ftrace_call_replace(ip, MCOUNT_ADDR); + + failed = ftrace_modify_code(ip, old, new); + if (failed) + rec->flags |= FTRACE_FL_FAILED; + } + } +} + +static notrace void ftrace_startup_code(void) +{ + ftrace_replace_code(1); +} + +static notrace void ftrace_shutdown_code(void) +{ + ftrace_replace_code(0); +} + +static notrace void ftrace_shutdown_replenish(void) +{ + if (ftrace_pages->next) + return; + + /* allocate another page */ + ftrace_pages->next = (void *)get_zeroed_page(GFP_KERNEL); +} static int notrace __ftrace_modify_code(void *data) { @@ -261,6 +347,23 @@ static int notrace __ftrace_modify_code(void *data) return 0; } +static notrace void +ftrace_code_disable(struct dyn_ftrace *rec, unsigned long addr) +{ + unsigned long ip; + unsigned char *nop, *call; + int failed; + + ip = rec->ip; + + nop = ftrace_nop_replace(); + call = ftrace_call_replace(ip, addr); + + failed = ftrace_modify_code(ip, call, nop); + if (failed) + rec->flags |= FTRACE_FL_FAILED; +} + static void notrace ftrace_run_startup_code(void) { stop_machine_run(__ftrace_modify_code, ftrace_startup_code, NR_CPUS); @@ -346,7 +449,7 @@ static int notrace __ftrace_update_code(void *ignore) /* all CPUS are stopped, we are safe to modify code */ hlist_for_each_entry(p, t, &head, node) { - ftrace_code_disable(p); + ftrace_code_disable(p, MCOUNT_ADDR); ftrace_update_cnt++; } @@ -407,12 +510,59 @@ static int notrace ftraced(void *ignore) return 0; } +static int __init ftrace_dyn_table_alloc(void) +{ + struct ftrace_page *pg; + int cnt; + int i; + int ret; + + ret = ftrace_dyn_arch_init(); + if (ret) + return ret; + + /* allocate a few pages */ + ftrace_pages_start = (void *)get_zeroed_page(GFP_KERNEL); + if (!ftrace_pages_start) + return -1; + + /* + * Allocate a few more pages. + * + * TODO: have some parser search vmlinux before + * final linking to find all calls to ftrace. + * Then we can: + * a) know how many pages to allocate. + * and/or + * b) set up the table then. + * + * The dynamic code is still necessary for + * modules. + */ + + pg = ftrace_pages = ftrace_pages_start; + + cnt = NR_TO_INIT / ENTRIES_PER_PAGE; + + for (i = 0; i < cnt; i++) { + pg->next = (void *)get_zeroed_page(GFP_KERNEL); + + /* If we fail, we'll try later anyway */ + if (!pg->next) + break; + + pg = pg->next; + } + + return 0; +} + static int __init notrace ftrace_shutdown_init(void) { struct task_struct *p; int ret; - ret = ftrace_shutdown_arch_init(); + ret = ftrace_dyn_table_alloc(); if (ret) return ret; -- cgit v1.2.3 From d61f82d06672f57fca410da6f7fffd15867db622 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:43 +0200 Subject: ftrace: use dynamic patching for updating mcount calls This patch replaces the indirect call to the mcount function pointer with a direct call that will be patched by the dynamic ftrace routines. On boot up, the mcount function calls the ftace_stub function. When the dynamic ftrace code is initialized, the ftrace_stub is replaced with a call to the ftrace_record_ip, which records the instruction pointers of the locations that call it. Later, the ftraced daemon will call kstop_machine and patch all the locations to nops. When a ftrace is enabled, the original calls to mcount will now be set top call ftrace_caller, which will do a direct call to the registered ftrace function. This direct call is also patched when the function that should be called is updated. All patching is performed by a kstop_machine routine to prevent any type of race conditions that is associated with modifying code on the fly. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/entry_32.S | 47 +++++++++++- arch/x86/kernel/entry_64.S | 67 ++++++++++++++++- arch/x86/kernel/ftrace.c | 41 +++++++++- include/linux/ftrace.h | 7 +- kernel/trace/ftrace.c | 183 ++++++++++++++++++++++++++------------------- 5 files changed, 261 insertions(+), 84 deletions(-) diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index f47b9b5440d2..e6517ce0b824 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -1110,10 +1110,50 @@ ENDPROC(xen_failsafe_callback) #endif /* CONFIG_XEN */ #ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE + +ENTRY(mcount) + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %eax + +.globl mcount_call +mcount_call: + call ftrace_stub + + popl %edx + popl %ecx + popl %eax + + ret +END(mcount) + +ENTRY(ftrace_caller) + pushl %eax + pushl %ecx + pushl %edx + movl 0xc(%esp), %eax + movl 0x4(%ebp), %edx + +.globl ftrace_call +ftrace_call: + call ftrace_stub + + popl %edx + popl %ecx + popl %eax + +.globl ftrace_stub +ftrace_stub: + ret +END(ftrace_caller) + +#else /* ! CONFIG_DYNAMIC_FTRACE */ + ENTRY(mcount) cmpl $ftrace_stub, ftrace_trace_function jnz trace - .globl ftrace_stub ftrace_stub: ret @@ -1126,7 +1166,7 @@ trace: movl 0xc(%esp), %eax movl 0x4(%ebp), %edx - call *ftrace_trace_function + call *ftrace_trace_function popl %edx popl %ecx @@ -1134,7 +1174,8 @@ trace: jmp ftrace_stub END(mcount) -#endif +#endif /* CONFIG_DYNAMIC_FTRACE */ +#endif /* CONFIG_FTRACE */ .section .rodata,"a" #include "syscall_table_32.S" diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index f046e0c64883..fe25e5febca3 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -55,6 +55,70 @@ .code64 #ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE +ENTRY(mcount) + + subq $0x38, %rsp + movq %rax, (%rsp) + movq %rcx, 8(%rsp) + movq %rdx, 16(%rsp) + movq %rsi, 24(%rsp) + movq %rdi, 32(%rsp) + movq %r8, 40(%rsp) + movq %r9, 48(%rsp) + + movq 0x38(%rsp), %rdi + +.globl mcount_call +mcount_call: + call ftrace_stub + + movq 48(%rsp), %r9 + movq 40(%rsp), %r8 + movq 32(%rsp), %rdi + movq 24(%rsp), %rsi + movq 16(%rsp), %rdx + movq 8(%rsp), %rcx + movq (%rsp), %rax + addq $0x38, %rsp + + retq +END(mcount) + +ENTRY(ftrace_caller) + + /* taken from glibc */ + subq $0x38, %rsp + movq %rax, (%rsp) + movq %rcx, 8(%rsp) + movq %rdx, 16(%rsp) + movq %rsi, 24(%rsp) + movq %rdi, 32(%rsp) + movq %r8, 40(%rsp) + movq %r9, 48(%rsp) + + movq 0x38(%rsp), %rdi + movq 8(%rbp), %rsi + +.globl ftrace_call +ftrace_call: + call ftrace_stub + + movq 48(%rsp), %r9 + movq 40(%rsp), %r8 + movq 32(%rsp), %rdi + movq 24(%rsp), %rsi + movq 16(%rsp), %rdx + movq 8(%rsp), %rcx + movq (%rsp), %rax + addq $0x38, %rsp + +.globl ftrace_stub +ftrace_stub: + retq +END(ftrace_caller) + +#else /* ! CONFIG_DYNAMIC_FTRACE */ ENTRY(mcount) cmpq $ftrace_stub, ftrace_trace_function jnz trace @@ -89,7 +153,8 @@ trace: jmp ftrace_stub END(mcount) -#endif +#endif /* CONFIG_DYNAMIC_FTRACE */ +#endif /* CONFIG_FTRACE */ #ifndef CONFIG_PREEMPT #define retint_kernel retint_restore_args diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index b69795efa226..9f44623e0072 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -109,10 +109,49 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, return faulted; } -int __init ftrace_dyn_arch_init(void) +notrace int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned long ip = (unsigned long)(&ftrace_call); + unsigned char old[5], *new; + int ret; + + ip += CALL_BACK; + + memcpy(old, &ftrace_call, 5); + new = ftrace_call_replace(ip, (unsigned long)func); + ret = ftrace_modify_code(ip, old, new); + + return ret; +} + +notrace int ftrace_mcount_set(unsigned long *data) +{ + unsigned long ip = (long)(&mcount_call); + unsigned long *addr = data; + unsigned char old[5], *new; + + /* ip is at the location, but modify code will subtact this */ + ip += CALL_BACK; + + /* + * Replace the mcount stub with a pointer to the + * ip recorder function. + */ + memcpy(old, &mcount_call, 5); + new = ftrace_call_replace(ip, *addr); + *addr = ftrace_modify_code(ip, old, new); + + return 0; +} + +int __init ftrace_dyn_arch_init(void *data) { const unsigned char *const *noptable = find_nop_table(); + /* This is running in kstop_machine */ + + ftrace_mcount_set(data); + ftrace_nop = (unsigned long *)noptable[CALL_BACK]; return 0; diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index d509ad6c9cb8..b0dd0093058f 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -56,9 +56,14 @@ struct dyn_ftrace { extern int ftrace_ip_converted(unsigned long ip); extern unsigned char *ftrace_nop_replace(void); extern unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr); -extern int ftrace_dyn_arch_init(void); +extern int ftrace_dyn_arch_init(void *data); +extern int ftrace_mcount_set(unsigned long *data); extern int ftrace_modify_code(unsigned long ip, unsigned char *old_code, unsigned char *new_code); +extern int ftrace_update_ftrace_func(ftrace_func_t func); +extern void ftrace_caller(void); +extern void ftrace_call(void); +extern void mcount_call(void); #endif #ifdef CONFIG_FRAME_POINTER diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index f6d9af3bf66b..88544f9bc0ed 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -26,14 +26,8 @@ #include "trace.h" -#ifdef CONFIG_DYNAMIC_FTRACE -# define FTRACE_ENABLED_INIT 1 -#else -# define FTRACE_ENABLED_INIT 0 -#endif - -int ftrace_enabled = FTRACE_ENABLED_INIT; -static int last_ftrace_enabled = FTRACE_ENABLED_INIT; +int ftrace_enabled; +static int last_ftrace_enabled; static DEFINE_SPINLOCK(ftrace_lock); static DEFINE_MUTEX(ftrace_sysctl_lock); @@ -149,6 +143,14 @@ static int notrace __unregister_ftrace_function(struct ftrace_ops *ops) #ifdef CONFIG_DYNAMIC_FTRACE +enum { + FTRACE_ENABLE_CALLS = (1 << 0), + FTRACE_DISABLE_CALLS = (1 << 1), + FTRACE_UPDATE_TRACE_FUNC = (1 << 2), + FTRACE_ENABLE_MCOUNT = (1 << 3), + FTRACE_DISABLE_MCOUNT = (1 << 4), +}; + static struct hlist_head ftrace_hash[FTRACE_HASHSIZE]; static DEFINE_PER_CPU(int, ftrace_shutdown_disable_cpu); @@ -199,12 +201,8 @@ ftrace_add_hash(struct dyn_ftrace *node, unsigned long key) hlist_add_head(&node->node, &ftrace_hash[key]); } -static notrace struct dyn_ftrace *ftrace_alloc_shutdown_node(unsigned long ip) +static notrace struct dyn_ftrace *ftrace_alloc_dyn_node(unsigned long ip) { - /* If this was already converted, skip it */ - if (ftrace_ip_converted(ip)) - return NULL; - if (ftrace_pages->index == ENTRIES_PER_PAGE) { if (!ftrace_pages->next) return NULL; @@ -215,7 +213,7 @@ static notrace struct dyn_ftrace *ftrace_alloc_shutdown_node(unsigned long ip) } static void notrace -ftrace_record_ip(unsigned long ip, unsigned long parent_ip) +ftrace_record_ip(unsigned long ip) { struct dyn_ftrace *node; unsigned long flags; @@ -223,6 +221,9 @@ ftrace_record_ip(unsigned long ip, unsigned long parent_ip) int resched; int atomic; + if (!ftrace_enabled) + return; + resched = need_resched(); preempt_disable_notrace(); @@ -251,11 +252,12 @@ ftrace_record_ip(unsigned long ip, unsigned long parent_ip) /* * There's a slight race that the ftraced will update the - * hash and reset here. The arch alloc is responsible - * for seeing if the IP has already changed, and if - * it has, the alloc will fail. + * hash and reset here. If it is already converted, skip it. */ - node = ftrace_alloc_shutdown_node(ip); + if (ftrace_ip_converted(ip)) + goto out_unlock; + + node = ftrace_alloc_dyn_node(ip); if (!node) goto out_unlock; @@ -277,11 +279,7 @@ ftrace_record_ip(unsigned long ip, unsigned long parent_ip) preempt_enable_notrace(); } -static struct ftrace_ops ftrace_shutdown_ops __read_mostly = -{ - .func = ftrace_record_ip, -}; - +#define FTRACE_ADDR ((long)(&ftrace_caller)) #define MCOUNT_ADDR ((long)(&mcount)) static void notrace ftrace_replace_code(int saved) @@ -309,9 +307,9 @@ static void notrace ftrace_replace_code(int saved) ip = rec->ip; if (saved) - new = ftrace_call_replace(ip, MCOUNT_ADDR); + new = ftrace_call_replace(ip, FTRACE_ADDR); else - old = ftrace_call_replace(ip, MCOUNT_ADDR); + old = ftrace_call_replace(ip, FTRACE_ADDR); failed = ftrace_modify_code(ip, old, new); if (failed) @@ -320,16 +318,6 @@ static void notrace ftrace_replace_code(int saved) } } -static notrace void ftrace_startup_code(void) -{ - ftrace_replace_code(1); -} - -static notrace void ftrace_shutdown_code(void) -{ - ftrace_replace_code(0); -} - static notrace void ftrace_shutdown_replenish(void) { if (ftrace_pages->next) @@ -339,16 +327,8 @@ static notrace void ftrace_shutdown_replenish(void) ftrace_pages->next = (void *)get_zeroed_page(GFP_KERNEL); } -static int notrace __ftrace_modify_code(void *data) -{ - void (*func)(void) = data; - - func(); - return 0; -} - static notrace void -ftrace_code_disable(struct dyn_ftrace *rec, unsigned long addr) +ftrace_code_disable(struct dyn_ftrace *rec) { unsigned long ip; unsigned char *nop, *call; @@ -357,67 +337,113 @@ ftrace_code_disable(struct dyn_ftrace *rec, unsigned long addr) ip = rec->ip; nop = ftrace_nop_replace(); - call = ftrace_call_replace(ip, addr); + call = ftrace_call_replace(ip, MCOUNT_ADDR); failed = ftrace_modify_code(ip, call, nop); if (failed) rec->flags |= FTRACE_FL_FAILED; } -static void notrace ftrace_run_startup_code(void) +static int notrace __ftrace_modify_code(void *data) { - stop_machine_run(__ftrace_modify_code, ftrace_startup_code, NR_CPUS); + unsigned long addr; + int *command = data; + + if (*command & FTRACE_ENABLE_CALLS) + ftrace_replace_code(1); + else if (*command & FTRACE_DISABLE_CALLS) + ftrace_replace_code(0); + + if (*command & FTRACE_UPDATE_TRACE_FUNC) + ftrace_update_ftrace_func(ftrace_trace_function); + + if (*command & FTRACE_ENABLE_MCOUNT) { + addr = (unsigned long)ftrace_record_ip; + ftrace_mcount_set(&addr); + } else if (*command & FTRACE_DISABLE_MCOUNT) { + addr = (unsigned long)ftrace_stub; + ftrace_mcount_set(&addr); + } + + return 0; } -static void notrace ftrace_run_shutdown_code(void) +static void notrace ftrace_run_update_code(int command) { - stop_machine_run(__ftrace_modify_code, ftrace_shutdown_code, NR_CPUS); + stop_machine_run(__ftrace_modify_code, &command, NR_CPUS); } +static ftrace_func_t saved_ftrace_func; + static void notrace ftrace_startup(void) { + int command = 0; + mutex_lock(&ftraced_lock); ftraced_suspend++; - if (ftraced_suspend != 1) + if (ftraced_suspend == 1) + command |= FTRACE_ENABLE_CALLS; + + if (saved_ftrace_func != ftrace_trace_function) { + saved_ftrace_func = ftrace_trace_function; + command |= FTRACE_UPDATE_TRACE_FUNC; + } + + if (!command || !ftrace_enabled) goto out; - __unregister_ftrace_function(&ftrace_shutdown_ops); - if (ftrace_enabled) - ftrace_run_startup_code(); + ftrace_run_update_code(command); out: mutex_unlock(&ftraced_lock); } static void notrace ftrace_shutdown(void) { + int command = 0; + mutex_lock(&ftraced_lock); ftraced_suspend--; - if (ftraced_suspend) - goto out; + if (!ftraced_suspend) + command |= FTRACE_DISABLE_CALLS; - if (ftrace_enabled) - ftrace_run_shutdown_code(); + if (saved_ftrace_func != ftrace_trace_function) { + saved_ftrace_func = ftrace_trace_function; + command |= FTRACE_UPDATE_TRACE_FUNC; + } - __register_ftrace_function(&ftrace_shutdown_ops); + if (!command || !ftrace_enabled) + goto out; + + ftrace_run_update_code(command); out: mutex_unlock(&ftraced_lock); } static void notrace ftrace_startup_sysctl(void) { + int command = FTRACE_ENABLE_MCOUNT; + mutex_lock(&ftraced_lock); + /* Force update next time */ + saved_ftrace_func = NULL; /* ftraced_suspend is true if we want ftrace running */ if (ftraced_suspend) - ftrace_run_startup_code(); + command |= FTRACE_ENABLE_CALLS; + + ftrace_run_update_code(command); mutex_unlock(&ftraced_lock); } static void notrace ftrace_shutdown_sysctl(void) { + int command = FTRACE_DISABLE_MCOUNT; + mutex_lock(&ftraced_lock); /* ftraced_suspend is true if ftrace is running */ if (ftraced_suspend) - ftrace_run_shutdown_code(); + command |= FTRACE_DISABLE_CALLS; + + ftrace_run_update_code(command); mutex_unlock(&ftraced_lock); } @@ -430,11 +456,13 @@ static int notrace __ftrace_update_code(void *ignore) struct dyn_ftrace *p; struct hlist_head head; struct hlist_node *t; + int save_ftrace_enabled; cycle_t start, stop; int i; - /* Don't be calling ftrace ops now */ - __unregister_ftrace_function(&ftrace_shutdown_ops); + /* Don't be recording funcs now */ + save_ftrace_enabled = ftrace_enabled; + ftrace_enabled = 0; start = now(raw_smp_processor_id()); ftrace_update_cnt = 0; @@ -449,7 +477,7 @@ static int notrace __ftrace_update_code(void *ignore) /* all CPUS are stopped, we are safe to modify code */ hlist_for_each_entry(p, t, &head, node) { - ftrace_code_disable(p, MCOUNT_ADDR); + ftrace_code_disable(p); ftrace_update_cnt++; } @@ -459,7 +487,7 @@ static int notrace __ftrace_update_code(void *ignore) ftrace_update_time = stop - start; ftrace_update_tot_cnt += ftrace_update_cnt; - __register_ftrace_function(&ftrace_shutdown_ops); + ftrace_enabled = save_ftrace_enabled; return 0; } @@ -515,11 +543,6 @@ static int __init ftrace_dyn_table_alloc(void) struct ftrace_page *pg; int cnt; int i; - int ret; - - ret = ftrace_dyn_arch_init(); - if (ret) - return ret; /* allocate a few pages */ ftrace_pages_start = (void *)get_zeroed_page(GFP_KERNEL); @@ -557,11 +580,19 @@ static int __init ftrace_dyn_table_alloc(void) return 0; } -static int __init notrace ftrace_shutdown_init(void) +static int __init notrace ftrace_dynamic_init(void) { struct task_struct *p; + unsigned long addr; int ret; + addr = (unsigned long)ftrace_record_ip; + stop_machine_run(ftrace_dyn_arch_init, &addr, NR_CPUS); + + /* ftrace_dyn_arch_init places the return code in addr */ + if (addr) + return addr; + ret = ftrace_dyn_table_alloc(); if (ret) return ret; @@ -570,12 +601,12 @@ static int __init notrace ftrace_shutdown_init(void) if (IS_ERR(p)) return -1; - __register_ftrace_function(&ftrace_shutdown_ops); + last_ftrace_enabled = ftrace_enabled = 1; return 0; } -core_initcall(ftrace_shutdown_init); +core_initcall(ftrace_dynamic_init); #else # define ftrace_startup() do { } while (0) # define ftrace_shutdown() do { } while (0) @@ -599,9 +630,8 @@ int register_ftrace_function(struct ftrace_ops *ops) int ret; mutex_lock(&ftrace_sysctl_lock); - ftrace_startup(); - ret = __register_ftrace_function(ops); + ftrace_startup(); mutex_unlock(&ftrace_sysctl_lock); return ret; @@ -619,10 +649,7 @@ int unregister_ftrace_function(struct ftrace_ops *ops) mutex_lock(&ftrace_sysctl_lock); ret = __unregister_ftrace_function(ops); - - if (ftrace_list == &ftrace_list_end) - ftrace_shutdown(); - + ftrace_shutdown(); mutex_unlock(&ftrace_sysctl_lock); return ret; -- cgit v1.2.3 From 5072c59fd45e9976d02ee6f18c7336ef97623cbc Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:43 +0200 Subject: ftrace: add filter select functions to trace This patch adds two files to the debugfs system: /debugfs/tracing/available_filter_functions and /debugfs/tracing/set_ftrace_filter The available_filter_functions lists all functions that has been recorded by the ftraced that has called the ftrace_record_ip function. This is to allow users to see what functions have been converted to nops and can be enabled for tracing. To enable functions, simply echo the names (whitespace delimited) into set_ftrace_filter. Simple wildcards are also allowed. echo 'scheduler' > /debugfs/tracing/set_ftrace_filter Will have only the scheduler be activated when tracing is enabled. echo 'sched_*' > /debugfs/tracing/set_ftrace_filter Will have only the functions starting with 'sched_' be activated. echo '*lock' > /debugfs/tracing/set_ftrace_filter Will have only functions ending with 'lock' be activated. echo '*lock*' > /debugfs/tracing/set_ftrace_filter Will have only functions with 'lock' in its name be activated. Note: 'sched*lock' will not work. The only wildcards that are allowed is an asterisk and the beginning and or end of the string passed in. Multiple names can be passed in with whitespace delimited: echo 'scheduler *lock *acpi*' > /debugfs/tracing/set_ftrace_filter is also the same as: echo 'scheduler' > /debugfs/tracing/set_ftrace_filter echo '*lock' >> /debugfs/tracing/set_ftrace_filter echo '*acpi*' >> /debugfs/tracing/set_ftrace_filter Appending does just that. It appends to the list. To disable all filters simply echo an empty line in: echo > /debugfs/tracing/set_ftrace_filter Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 4 +- kernel/trace/ftrace.c | 527 +++++++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 513 insertions(+), 18 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index b0dd0093058f..f5911d2d42c3 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -43,7 +43,9 @@ extern void mcount(void); # define FTRACE_HASHSIZE (1< #include #include +#include +#include #include #include #include -#include +#include #include #include +#include #include #include "trace.h" @@ -151,12 +154,15 @@ enum { FTRACE_DISABLE_MCOUNT = (1 << 4), }; +static int ftrace_filtered; + static struct hlist_head ftrace_hash[FTRACE_HASHSIZE]; static DEFINE_PER_CPU(int, ftrace_shutdown_disable_cpu); static DEFINE_SPINLOCK(ftrace_shutdown_lock); static DEFINE_MUTEX(ftraced_lock); +static DEFINE_MUTEX(ftrace_filter_lock); struct ftrace_page { struct ftrace_page *next; @@ -282,16 +288,82 @@ ftrace_record_ip(unsigned long ip) #define FTRACE_ADDR ((long)(&ftrace_caller)) #define MCOUNT_ADDR ((long)(&mcount)) -static void notrace ftrace_replace_code(int saved) +static void notrace +__ftrace_replace_code(struct dyn_ftrace *rec, + unsigned char *old, unsigned char *new, int enable) +{ + unsigned long ip; + int failed; + + ip = rec->ip; + + if (ftrace_filtered && enable) { + unsigned long fl; + /* + * If filtering is on: + * + * If this record is set to be filtered and + * is enabled then do nothing. + * + * If this record is set to be filtered and + * it is not enabled, enable it. + * + * If this record is not set to be filtered + * and it is not enabled do nothing. + * + * If this record is not set to be filtered and + * it is enabled, disable it. + */ + fl = rec->flags & (FTRACE_FL_FILTER | FTRACE_FL_ENABLED); + + if ((fl == (FTRACE_FL_FILTER | FTRACE_FL_ENABLED)) || + (fl == 0)) + return; + + /* + * If it is enabled disable it, + * otherwise enable it! + */ + if (fl == FTRACE_FL_ENABLED) { + /* swap new and old */ + new = old; + old = ftrace_call_replace(ip, FTRACE_ADDR); + rec->flags &= ~FTRACE_FL_ENABLED; + } else { + new = ftrace_call_replace(ip, FTRACE_ADDR); + rec->flags |= FTRACE_FL_ENABLED; + } + } else { + + if (enable) + new = ftrace_call_replace(ip, FTRACE_ADDR); + else + old = ftrace_call_replace(ip, FTRACE_ADDR); + + if (enable) { + if (rec->flags & FTRACE_FL_ENABLED) + return; + rec->flags |= FTRACE_FL_ENABLED; + } else { + if (!(rec->flags & FTRACE_FL_ENABLED)) + return; + rec->flags &= ~FTRACE_FL_ENABLED; + } + } + + failed = ftrace_modify_code(ip, old, new); + if (failed) + rec->flags |= FTRACE_FL_FAILED; +} + +static void notrace ftrace_replace_code(int enable) { unsigned char *new = NULL, *old = NULL; struct dyn_ftrace *rec; struct ftrace_page *pg; - unsigned long ip; - int failed; int i; - if (saved) + if (enable) old = ftrace_nop_replace(); else new = ftrace_nop_replace(); @@ -304,16 +376,7 @@ static void notrace ftrace_replace_code(int saved) if (rec->flags & FTRACE_FL_FAILED) continue; - ip = rec->ip; - - if (saved) - new = ftrace_call_replace(ip, FTRACE_ADDR); - else - old = ftrace_call_replace(ip, FTRACE_ADDR); - - failed = ftrace_modify_code(ip, old, new); - if (failed) - rec->flags |= FTRACE_FL_FAILED; + __ftrace_replace_code(rec, old, new, enable); } } } @@ -580,6 +643,436 @@ static int __init ftrace_dyn_table_alloc(void) return 0; } +enum { + FTRACE_ITER_FILTER = (1 << 0), + FTRACE_ITER_CONT = (1 << 1), +}; + +#define FTRACE_BUFF_MAX (KSYM_SYMBOL_LEN+4) /* room for wildcards */ + +struct ftrace_iterator { + loff_t pos; + struct ftrace_page *pg; + unsigned idx; + unsigned flags; + unsigned char buffer[FTRACE_BUFF_MAX+1]; + unsigned buffer_idx; + unsigned filtered; +}; + +static void notrace * +t_next(struct seq_file *m, void *v, loff_t *pos) +{ + struct ftrace_iterator *iter = m->private; + struct dyn_ftrace *rec = NULL; + + (*pos)++; + + retry: + if (iter->idx >= iter->pg->index) { + if (iter->pg->next) { + iter->pg = iter->pg->next; + iter->idx = 0; + goto retry; + } + } else { + rec = &iter->pg->records[iter->idx++]; + if ((rec->flags & FTRACE_FL_FAILED) || + ((iter->flags & FTRACE_ITER_FILTER) && + !(rec->flags & FTRACE_FL_FILTER))) { + rec = NULL; + goto retry; + } + } + + iter->pos = *pos; + + return rec; +} + +static void *t_start(struct seq_file *m, loff_t *pos) +{ + struct ftrace_iterator *iter = m->private; + void *p = NULL; + loff_t l = -1; + + if (*pos != iter->pos) { + for (p = t_next(m, p, &l); p && l < *pos; p = t_next(m, p, &l)) + ; + } else { + l = *pos; + p = t_next(m, p, &l); + } + + return p; +} + +static void t_stop(struct seq_file *m, void *p) +{ +} + +static int t_show(struct seq_file *m, void *v) +{ + struct dyn_ftrace *rec = v; + char str[KSYM_SYMBOL_LEN]; + + if (!rec) + return 0; + + kallsyms_lookup(rec->ip, NULL, NULL, NULL, str); + + seq_printf(m, "%s\n", str); + + return 0; +} + +static struct seq_operations show_ftrace_seq_ops = { + .start = t_start, + .next = t_next, + .stop = t_stop, + .show = t_show, +}; + +static int notrace +ftrace_avail_open(struct inode *inode, struct file *file) +{ + struct ftrace_iterator *iter; + int ret; + + iter = kzalloc(sizeof(*iter), GFP_KERNEL); + if (!iter) + return -ENOMEM; + + iter->pg = ftrace_pages_start; + iter->pos = -1; + + ret = seq_open(file, &show_ftrace_seq_ops); + if (!ret) { + struct seq_file *m = file->private_data; + m->private = iter; + } else + kfree(iter); + + return ret; +} + +int ftrace_avail_release(struct inode *inode, struct file *file) +{ + struct seq_file *m = (struct seq_file *)file->private_data; + struct ftrace_iterator *iter = m->private; + + seq_release(inode, file); + kfree(iter); + return 0; +} + +static void notrace ftrace_filter_reset(void) +{ + struct ftrace_page *pg; + struct dyn_ftrace *rec; + unsigned i; + + /* keep kstop machine from running */ + preempt_disable(); + ftrace_filtered = 0; + pg = ftrace_pages_start; + while (pg) { + for (i = 0; i < pg->index; i++) { + rec = &pg->records[i]; + if (rec->flags & FTRACE_FL_FAILED) + continue; + rec->flags &= ~FTRACE_FL_FILTER; + } + pg = pg->next; + } + preempt_enable(); +} + +static int notrace +ftrace_filter_open(struct inode *inode, struct file *file) +{ + struct ftrace_iterator *iter; + int ret = 0; + + iter = kzalloc(sizeof(*iter), GFP_KERNEL); + if (!iter) + return -ENOMEM; + + mutex_lock(&ftrace_filter_lock); + if ((file->f_mode & FMODE_WRITE) && + !(file->f_flags & O_APPEND)) + ftrace_filter_reset(); + + if (file->f_mode & FMODE_READ) { + iter->pg = ftrace_pages_start; + iter->pos = -1; + iter->flags = FTRACE_ITER_FILTER; + + ret = seq_open(file, &show_ftrace_seq_ops); + if (!ret) { + struct seq_file *m = file->private_data; + m->private = iter; + } else + kfree(iter); + } else + file->private_data = iter; + mutex_unlock(&ftrace_filter_lock); + + return ret; +} + +static ssize_t notrace +ftrace_filter_read(struct file *file, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + if (file->f_mode & FMODE_READ) + return seq_read(file, ubuf, cnt, ppos); + else + return -EPERM; +} + +static loff_t notrace +ftrace_filter_lseek(struct file *file, loff_t offset, int origin) +{ + loff_t ret; + + if (file->f_mode & FMODE_READ) + ret = seq_lseek(file, offset, origin); + else + file->f_pos = ret = 1; + + return ret; +} + +enum { + MATCH_FULL, + MATCH_FRONT_ONLY, + MATCH_MIDDLE_ONLY, + MATCH_END_ONLY, +}; + +static void notrace +ftrace_match(unsigned char *buff, int len) +{ + char str[KSYM_SYMBOL_LEN]; + char *search = NULL; + struct ftrace_page *pg; + struct dyn_ftrace *rec; + int type = MATCH_FULL; + unsigned i, match = 0, search_len = 0; + + for (i = 0; i < len; i++) { + if (buff[i] == '*') { + if (!i) { + search = buff + i + 1; + type = MATCH_END_ONLY; + search_len = len - (i + 1); + } else { + if (type == MATCH_END_ONLY) { + type = MATCH_MIDDLE_ONLY; + } else { + match = i; + type = MATCH_FRONT_ONLY; + } + buff[i] = 0; + break; + } + } + } + + /* keep kstop machine from running */ + preempt_disable(); + ftrace_filtered = 1; + pg = ftrace_pages_start; + while (pg) { + for (i = 0; i < pg->index; i++) { + int matched = 0; + char *ptr; + + rec = &pg->records[i]; + if (rec->flags & FTRACE_FL_FAILED) + continue; + kallsyms_lookup(rec->ip, NULL, NULL, NULL, str); + switch (type) { + case MATCH_FULL: + if (strcmp(str, buff) == 0) + matched = 1; + break; + case MATCH_FRONT_ONLY: + if (memcmp(str, buff, match) == 0) + matched = 1; + break; + case MATCH_MIDDLE_ONLY: + if (strstr(str, search)) + matched = 1; + break; + case MATCH_END_ONLY: + ptr = strstr(str, search); + if (ptr && (ptr[search_len] == 0)) + matched = 1; + break; + } + if (matched) + rec->flags |= FTRACE_FL_FILTER; + } + pg = pg->next; + } + preempt_enable(); +} + +static ssize_t notrace +ftrace_filter_write(struct file *file, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + struct ftrace_iterator *iter; + char ch; + size_t read = 0; + ssize_t ret; + + if (!cnt || cnt < 0) + return 0; + + mutex_lock(&ftrace_filter_lock); + + if (file->f_mode & FMODE_READ) { + struct seq_file *m = file->private_data; + iter = m->private; + } else + iter = file->private_data; + + if (!*ppos) { + iter->flags &= ~FTRACE_ITER_CONT; + iter->buffer_idx = 0; + } + + ret = get_user(ch, ubuf++); + if (ret) + goto out; + read++; + cnt--; + + if (!(iter->flags & ~FTRACE_ITER_CONT)) { + /* skip white space */ + while (cnt && isspace(ch)) { + ret = get_user(ch, ubuf++); + if (ret) + goto out; + read++; + cnt--; + } + + + if (isspace(ch)) { + file->f_pos += read; + ret = read; + goto out; + } + + iter->buffer_idx = 0; + } + + while (cnt && !isspace(ch)) { + if (iter->buffer_idx < FTRACE_BUFF_MAX) + iter->buffer[iter->buffer_idx++] = ch; + else { + ret = -EINVAL; + goto out; + } + ret = get_user(ch, ubuf++); + if (ret) + goto out; + read++; + cnt--; + } + + if (isspace(ch)) { + iter->filtered++; + iter->buffer[iter->buffer_idx] = 0; + ftrace_match(iter->buffer, iter->buffer_idx); + iter->buffer_idx = 0; + } else + iter->flags |= FTRACE_ITER_CONT; + + + file->f_pos += read; + + ret = read; + out: + mutex_unlock(&ftrace_filter_lock); + + return ret; +} + +static int notrace +ftrace_filter_release(struct inode *inode, struct file *file) +{ + struct seq_file *m = (struct seq_file *)file->private_data; + struct ftrace_iterator *iter; + + mutex_lock(&ftrace_filter_lock); + if (file->f_mode & FMODE_READ) { + iter = m->private; + + seq_release(inode, file); + } else + iter = file->private_data; + + if (iter->buffer_idx) { + iter->filtered++; + iter->buffer[iter->buffer_idx] = 0; + ftrace_match(iter->buffer, iter->buffer_idx); + } + + mutex_lock(&ftrace_sysctl_lock); + mutex_lock(&ftraced_lock); + if (iter->filtered && ftraced_suspend && ftrace_enabled) + ftrace_run_update_code(FTRACE_ENABLE_CALLS); + mutex_unlock(&ftraced_lock); + mutex_unlock(&ftrace_sysctl_lock); + + kfree(iter); + mutex_unlock(&ftrace_filter_lock); + return 0; +} + +static struct file_operations ftrace_avail_fops = { + .open = ftrace_avail_open, + .read = seq_read, + .llseek = seq_lseek, + .release = ftrace_avail_release, +}; + +static struct file_operations ftrace_filter_fops = { + .open = ftrace_filter_open, + .read = ftrace_filter_read, + .write = ftrace_filter_write, + .llseek = ftrace_filter_lseek, + .release = ftrace_filter_release, +}; + +static __init int ftrace_init_debugfs(void) +{ + struct dentry *d_tracer; + struct dentry *entry; + + d_tracer = tracing_init_dentry(); + + entry = debugfs_create_file("available_filter_functions", 0444, + d_tracer, NULL, &ftrace_avail_fops); + if (!entry) + pr_warning("Could not create debugfs " + "'available_filter_functions' entry\n"); + + entry = debugfs_create_file("set_ftrace_filter", 0644, d_tracer, + NULL, &ftrace_filter_fops); + if (!entry) + pr_warning("Could not create debugfs " + "'set_ftrace_filter' entry\n"); + return 0; +} + +fs_initcall(ftrace_init_debugfs); + static int __init notrace ftrace_dynamic_init(void) { struct task_struct *p; @@ -657,14 +1150,14 @@ int unregister_ftrace_function(struct ftrace_ops *ops) notrace int ftrace_enable_sysctl(struct ctl_table *table, int write, - struct file *filp, void __user *buffer, size_t *lenp, + struct file *file, void __user *buffer, size_t *lenp, loff_t *ppos) { int ret; mutex_lock(&ftrace_sysctl_lock); - ret = proc_dointvec(table, write, filp, buffer, lenp, ppos); + ret = proc_dointvec(table, write, file, buffer, lenp, ppos); if (ret || !write || (last_ftrace_enabled == ftrace_enabled)) goto out; -- cgit v1.2.3 From 4c11d7aed389375253b59e2b1865eec96663c65d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:43 +0200 Subject: ftrace: convert single large buffer into single pages. Allocating large buffers for the tracer may fail easily. This patch converts the buffer from a large ordered allocation to single pages. It uses the struct page LRU field to link the pages together. Later patches may also implement dynamic increasing and decreasing of the trace buffers. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 245 +++++++++++++++++++++++++++++++++++++++------------ kernel/trace/trace.h | 8 +- 2 files changed, 195 insertions(+), 58 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 1b8eca7650d4..d7ad030a4c49 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -49,7 +50,7 @@ static struct trace_array max_tr; static DEFINE_PER_CPU(struct trace_array_cpu, max_data); static int tracer_enabled; -static unsigned long trace_nr_entries = 4096UL; +static unsigned long trace_nr_entries = 16384UL; static struct tracer *trace_types __read_mostly; static struct tracer *current_trace __read_mostly; @@ -57,6 +58,8 @@ static int max_tracer_type_len; static DEFINE_MUTEX(trace_types_lock); +#define ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(struct trace_entry)) + static int __init set_nr_entries(char *str) { if (!str) @@ -103,6 +106,7 @@ static const char *trace_options[] = { static unsigned trace_flags; +static DEFINE_SPINLOCK(ftrace_max_lock); /* * Copy the new maximum trace into the separate maximum-trace @@ -136,17 +140,23 @@ update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) { struct trace_array_cpu *data; void *save_trace; + struct list_head save_pages; int i; + WARN_ON_ONCE(!irqs_disabled()); + spin_lock(&ftrace_max_lock); /* clear out all the previous traces */ for_each_possible_cpu(i) { data = tr->data[i]; save_trace = max_tr.data[i]->trace; + save_pages = max_tr.data[i]->trace_pages; memcpy(max_tr.data[i], data, sizeof(*data)); data->trace = save_trace; + data->trace_pages = save_pages; } __update_max_tr(tr, tsk, cpu); + spin_unlock(&ftrace_max_lock); } /** @@ -160,16 +170,22 @@ update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu) { struct trace_array_cpu *data = tr->data[cpu]; void *save_trace; + struct list_head save_pages; int i; + WARN_ON_ONCE(!irqs_disabled()); + spin_lock(&ftrace_max_lock); for_each_possible_cpu(i) tracing_reset(max_tr.data[i]); save_trace = max_tr.data[cpu]->trace; + save_pages = max_tr.data[cpu]->trace_pages; memcpy(max_tr.data[cpu], data, sizeof(*data)); data->trace = save_trace; + data->trace_pages = save_pages; __update_max_tr(tr, tsk, cpu); + spin_unlock(&ftrace_max_lock); } int register_tracer(struct tracer *type) @@ -236,7 +252,8 @@ void unregister_tracer(struct tracer *type) void notrace tracing_reset(struct trace_array_cpu *data) { data->trace_idx = 0; - atomic_set(&data->underrun, 0); + data->trace_current = data->trace; + data->trace_current_idx = 0; } #ifdef CONFIG_FTRACE @@ -367,21 +384,27 @@ tracing_get_trace_entry(struct trace_array *tr, { unsigned long idx, idx_next; struct trace_entry *entry; + struct page *page; + struct list_head *next; - idx = data->trace_idx; + data->trace_idx++; + idx = data->trace_current_idx; idx_next = idx + 1; - if (unlikely(idx_next >= tr->entries)) { - atomic_inc(&data->underrun); + entry = data->trace_current + idx * TRACE_ENTRY_SIZE; + + if (unlikely(idx_next >= ENTRIES_PER_PAGE)) { + page = virt_to_page(data->trace_current); + if (unlikely(&page->lru == data->trace_pages.prev)) + next = data->trace_pages.next; + else + next = page->lru.next; + page = list_entry(next, struct page, lru); + data->trace_current = page_address(page); idx_next = 0; } - data->trace_idx = idx_next; - - if (unlikely(idx_next != 0 && atomic_read(&data->underrun))) - atomic_inc(&data->underrun); - - entry = data->trace + idx * TRACE_ENTRY_SIZE; + data->trace_current_idx = idx_next; return entry; } @@ -442,21 +465,38 @@ enum trace_file_type { }; static struct trace_entry * -trace_entry_idx(struct trace_array *tr, unsigned long idx, int cpu) +trace_entry_idx(struct trace_array *tr, struct trace_array_cpu *data, + struct trace_iterator *iter, int cpu) { - struct trace_entry *array = tr->data[cpu]->trace; - unsigned long underrun; + struct page *page; + struct trace_entry *array; - if (idx >= tr->entries) + if (iter->next_idx[cpu] >= tr->entries || + iter->next_idx[cpu] >= data->trace_idx) return NULL; - underrun = atomic_read(&tr->data[cpu]->underrun); - if (underrun) - idx = ((underrun - 1) + idx) % tr->entries; - else if (idx >= tr->data[cpu]->trace_idx) - return NULL; + if (!iter->next_page[cpu]) { + /* + * Initialize. If the count of elements in + * this buffer is greater than the max entries + * we had an underrun. Which means we looped around. + * We can simply use the current pointer as our + * starting point. + */ + if (data->trace_idx >= tr->entries) { + page = virt_to_page(data->trace_current); + iter->next_page[cpu] = &page->lru; + iter->next_page_idx[cpu] = data->trace_current_idx; + } else { + iter->next_page[cpu] = data->trace_pages.next; + iter->next_page_idx[cpu] = 0; + } + } - return &array[idx]; + page = list_entry(iter->next_page[cpu], struct page, lru); + array = page_address(page); + + return &array[iter->next_page_idx[cpu]]; } static struct notrace trace_entry * @@ -470,7 +510,7 @@ find_next_entry(struct trace_iterator *iter, int *ent_cpu) for_each_possible_cpu(cpu) { if (!tr->data[cpu]->trace) continue; - ent = trace_entry_idx(tr, iter->next_idx[cpu], cpu); + ent = trace_entry_idx(tr, tr->data[cpu], iter, cpu); if (ent && (!next || (long)(next->idx - ent->idx) > 0)) { next = ent; @@ -492,8 +532,19 @@ static void *find_next_entry_inc(struct trace_iterator *iter) next = find_next_entry(iter, &next_cpu); if (next) { - iter->next_idx[next_cpu]++; iter->idx++; + iter->next_idx[next_cpu]++; + iter->next_page_idx[next_cpu]++; + if (iter->next_page_idx[next_cpu] >= ENTRIES_PER_PAGE) { + struct trace_array_cpu *data = iter->tr->data[next_cpu]; + + iter->next_page_idx[next_cpu] = 0; + iter->next_page[next_cpu] = + iter->next_page[next_cpu]->next; + if (iter->next_page[next_cpu] == &data->trace_pages) + iter->next_page[next_cpu] = + data->trace_pages.next; + } } iter->ent = next; iter->cpu = next_cpu; @@ -554,14 +605,16 @@ static void *s_start(struct seq_file *m, loff_t *pos) iter->cpu = 0; iter->idx = -1; - for (i = 0; i < NR_CPUS; i++) + for_each_possible_cpu(i) { iter->next_idx[i] = 0; + iter->next_page[i] = NULL; + } for (p = iter; p && l < *pos; p = s_next(m, p, &l)) ; } else { - l = *pos; + l = *pos - 1; p = s_next(m, p, &l); } @@ -654,9 +707,8 @@ print_trace_header(struct seq_file *m, struct trace_iterator *iter) struct trace_array *tr = iter->tr; struct trace_array_cpu *data = tr->data[tr->cpu]; struct tracer *type = current_trace; - unsigned long underruns = 0; - unsigned long underrun; - unsigned long entries = 0; + unsigned long total = 0; + unsigned long entries = 0; int cpu; const char *name = "preemption"; @@ -665,11 +717,10 @@ print_trace_header(struct seq_file *m, struct trace_iterator *iter) for_each_possible_cpu(cpu) { if (tr->data[cpu]->trace) { - underrun = atomic_read(&tr->data[cpu]->underrun); - if (underrun) { - underruns += underrun; + total += tr->data[cpu]->trace_idx; + if (tr->data[cpu]->trace_idx > tr->entries) entries += tr->entries; - } else + else entries += tr->data[cpu]->trace_idx; } } @@ -682,7 +733,7 @@ print_trace_header(struct seq_file *m, struct trace_iterator *iter) " (M:%s VP:%d, KP:%d, SP:%d HP:%d", data->saved_latency, entries, - (entries + underruns), + total, tr->cpu, #if defined(CONFIG_PREEMPT_NONE) "server", @@ -882,8 +933,7 @@ static int trace_empty(struct trace_iterator *iter) data = iter->tr->data[cpu]; if (data->trace && - (data->trace_idx || - atomic_read(&data->underrun))) + data->trace_idx) return 0; } return 1; @@ -1464,42 +1514,109 @@ static struct tracer no_tracer __read_mostly = .name = "none", }; -static inline notrace int page_order(const unsigned long size) +static int trace_alloc_page(void) { - const unsigned long nr_pages = DIV_ROUND_UP(size, PAGE_SIZE); - return ilog2(roundup_pow_of_two(nr_pages)); + struct trace_array_cpu *data; + void *array; + struct page *page, *tmp; + LIST_HEAD(pages); + int i; + + /* first allocate a page for each CPU */ + for_each_possible_cpu(i) { + array = (void *)__get_free_page(GFP_KERNEL); + if (array == NULL) { + printk(KERN_ERR "tracer: failed to allocate page" + "for trace buffer!\n"); + goto free_pages; + } + + page = virt_to_page(array); + list_add(&page->lru, &pages); + +/* Only allocate if we are actually using the max trace */ +#ifdef CONFIG_TRACER_MAX_TRACE + array = (void *)__get_free_page(GFP_KERNEL); + if (array == NULL) { + printk(KERN_ERR "tracer: failed to allocate page" + "for trace buffer!\n"); + goto free_pages; + } + page = virt_to_page(array); + list_add(&page->lru, &pages); +#endif + } + + /* Now that we successfully allocate a page per CPU, add them */ + for_each_possible_cpu(i) { + data = global_trace.data[i]; + page = list_entry(pages.next, struct page, lru); + list_del(&page->lru); + list_add_tail(&page->lru, &data->trace_pages); + ClearPageLRU(page); + +#ifdef CONFIG_TRACER_MAX_TRACE + data = max_tr.data[i]; + page = list_entry(pages.next, struct page, lru); + list_del(&page->lru); + list_add_tail(&page->lru, &data->trace_pages); + SetPageLRU(page); +#endif + } + global_trace.entries += ENTRIES_PER_PAGE; + + return 0; + + free_pages: + list_for_each_entry_safe(page, tmp, &pages, lru) { + list_del(&page->lru); + __free_page(page); + } + return -ENOMEM; } __init static int tracer_alloc_buffers(void) { - const int order = page_order(trace_nr_entries * TRACE_ENTRY_SIZE); - const unsigned long size = (1UL << order) << PAGE_SHIFT; - struct trace_entry *array; + struct trace_array_cpu *data; + void *array; + struct page *page; + int pages = 0; int i; + /* Allocate the first page for all buffers */ for_each_possible_cpu(i) { - global_trace.data[i] = &per_cpu(global_trace_cpu, i); + data = global_trace.data[i] = &per_cpu(global_trace_cpu, i); max_tr.data[i] = &per_cpu(max_data, i); - array = (struct trace_entry *) - __get_free_pages(GFP_KERNEL, order); + array = (void *)__get_free_page(GFP_KERNEL); if (array == NULL) { - printk(KERN_ERR "tracer: failed to allocate" - " %ld bytes for trace buffer!\n", size); + printk(KERN_ERR "tracer: failed to allocate page" + "for trace buffer!\n"); goto free_buffers; } - global_trace.data[i]->trace = array; + data->trace = array; + + /* set the array to the list */ + INIT_LIST_HEAD(&data->trace_pages); + page = virt_to_page(array); + list_add(&page->lru, &data->trace_pages); + /* use the LRU flag to differentiate the two buffers */ + ClearPageLRU(page); /* Only allocate if we are actually using the max trace */ #ifdef CONFIG_TRACER_MAX_TRACE - array = (struct trace_entry *) - __get_free_pages(GFP_KERNEL, order); + array = (void *)__get_free_page(GFP_KERNEL); if (array == NULL) { - printk(KERN_ERR "wakeup tracer: failed to allocate" - " %ld bytes for trace buffer!\n", size); + printk(KERN_ERR "tracer: failed to allocate page" + "for trace buffer!\n"); goto free_buffers; } max_tr.data[i]->trace = array; + + INIT_LIST_HEAD(&max_tr.data[i]->trace_pages); + page = virt_to_page(array); + list_add(&page->lru, &max_tr.data[i]->trace_pages); + SetPageLRU(page); #endif } @@ -1507,11 +1624,18 @@ __init static int tracer_alloc_buffers(void) * Since we allocate by orders of pages, we may be able to * round up a bit. */ - global_trace.entries = size / TRACE_ENTRY_SIZE; + global_trace.entries = ENTRIES_PER_PAGE; max_tr.entries = global_trace.entries; + pages++; + + while (global_trace.entries < trace_nr_entries) { + if (trace_alloc_page()) + break; + pages++; + } - pr_info("tracer: %ld bytes allocated for %ld", - size, trace_nr_entries); + pr_info("tracer: %d pages allocated for %ld", + pages, trace_nr_entries); pr_info(" entries of %ld bytes\n", (long)TRACE_ENTRY_SIZE); pr_info(" actual entries %ld\n", global_trace.entries); @@ -1526,17 +1650,26 @@ __init static int tracer_alloc_buffers(void) free_buffers: for (i-- ; i >= 0; i--) { + struct page *page, *tmp; struct trace_array_cpu *data = global_trace.data[i]; if (data && data->trace) { - free_pages((unsigned long)data->trace, order); + list_for_each_entry_safe(page, tmp, + &data->trace_pages, lru) { + list_del(&page->lru); + __free_page(page); + } data->trace = NULL; } #ifdef CONFIG_TRACER_MAX_TRACE data = max_tr.data[i]; if (data && data->trace) { - free_pages((unsigned long)data->trace, order); + list_for_each_entry_safe(page, tmp, + &data->trace_pages, lru) { + list_del(&page->lru); + __free_page(page); + } data->trace = NULL; } #endif diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 3173a93561d4..83e257e38084 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -54,9 +54,11 @@ struct trace_entry { */ struct trace_array_cpu { void *trace; + void *trace_current; + unsigned trace_current_idx; + struct list_head trace_pages; unsigned long trace_idx; atomic_t disabled; - atomic_t underrun; unsigned long saved_latency; unsigned long critical_start; unsigned long critical_end; @@ -112,8 +114,10 @@ struct trace_iterator { unsigned long iter_flags; loff_t pos; unsigned long next_idx[NR_CPUS]; + struct list_head *next_page[NR_CPUS]; + unsigned next_page_idx[NR_CPUS]; + long idx; int cpu; - int idx; }; void notrace tracing_reset(struct trace_array_cpu *data); -- cgit v1.2.3 From f43fdad8627fec2d21df92799b254dceb66c9c3c Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:43 +0200 Subject: ftrace: fix kexec disable the tracer while kexec pulls the rug from under the old kernel. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/machine_kexec_32.c | 4 ++++ arch/x86/kernel/machine_kexec_64.c | 4 ++++ include/linux/ftrace.h | 7 +++++++ 3 files changed, 15 insertions(+) diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index d0b234c9fc31..88923fd7a6fc 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -11,6 +11,8 @@ #include #include #include +#include + #include #include #include @@ -107,6 +109,8 @@ NORET_TYPE void machine_kexec(struct kimage *image) unsigned long page_list[PAGES_NR]; void *control_page; + tracer_disable(); + /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index 576a03db4511..1558fdc174f9 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -11,6 +11,8 @@ #include #include #include +#include + #include #include #include @@ -184,6 +186,8 @@ NORET_TYPE void machine_kexec(struct kimage *image) unsigned long page_list[PAGES_NR]; void *control_page; + tracer_disable(); + /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index f5911d2d42c3..a42390c1d6e1 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -68,6 +68,13 @@ extern void ftrace_call(void); extern void mcount_call(void); #endif +static inline void tracer_disable(void) +{ +#ifdef CONFIG_FTRACE + ftrace_enabled = 0; +#endif +} + #ifdef CONFIG_FRAME_POINTER /* TODO: need to fix this for ARM */ # define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) -- cgit v1.2.3 From 5568b139f4d196273958ae2947a736fdf1ffeece Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:44 +0200 Subject: ftrace: debug smp_processor_id, use notrace preempt disable The debug smp_processor_id caused a recursive fault in debugging the irqsoff tracer. The tracer used a smp_processor_id in the ftrace callback, and this function called preempt_disable which also is traced. This caused a recursive fault (stack overload). Since using smp_processor_id without debugging on does not cause faults with the tracer (even when the tracer is wrong), the debug version should not cause a system reboot. This changes the debug_smp_processor_id to use the notrace versions of preempt_disable and enable. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- lib/smp_processor_id.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/smp_processor_id.c b/lib/smp_processor_id.c index e555ab62fbad..3b4dc098181e 100644 --- a/lib/smp_processor_id.c +++ b/lib/smp_processor_id.c @@ -37,7 +37,7 @@ notrace unsigned int debug_smp_processor_id(void) /* * Avoid recursion: */ - preempt_disable(); + preempt_disable_notrace(); if (!printk_ratelimit()) goto out_enable; @@ -49,7 +49,7 @@ notrace unsigned int debug_smp_processor_id(void) dump_stack(); out_enable: - preempt_enable_no_resched(); + preempt_enable_no_resched_notrace(); out: return this_cpu; } -- cgit v1.2.3 From 361943ad0ba3f16e66859e30a408915e008ba91e Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:44 +0200 Subject: ftrace: irqs off smp_processor_id() fix The irqsoff function tracer did a __get_cpu_var to determine if it should trace the function or not. The problem is that __get_cpu_var can preempt between getting the CPU and reading the cpu variable. This means that the cpu variable that is being read is not from the cpu being run on. At worst, this can give a false positive, where we trace the function when we should not. It will never give a false negative since we only want to trace when interrupts are disabled and we never preempt when they are. This fix adds a check after reading the irq flags to only trace if the interrupts are actually disabled. It also changes the reading of the cpu variable to use a raw_smp_processor_id since we now don't care if we preempt. We still catch that fact. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_irqsoff.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index 8b1231633dc5..bd3f88198308 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -74,12 +74,21 @@ irqsoff_tracer_call(unsigned long ip, unsigned long parent_ip) long disabled; int cpu; - if (likely(!__get_cpu_var(tracing_cpu))) + /* + * Does not matter if we preempt. We test the flags + * afterward, to see if irqs are disabled or not. + * If we preempt and get a false positive, the flags + * test will fail. + */ + cpu = raw_smp_processor_id(); + if (likely(!per_cpu(tracing_cpu, cpu))) return; local_save_flags(flags); + /* slight chance to get a false positive on tracing_cpu */ + if (!irqs_disabled_flags(flags)) + return; - cpu = raw_smp_processor_id(); data = tr->data[cpu]; disabled = atomic_inc_return(&data->disabled); -- cgit v1.2.3 From 0764d23cf066c52de42b653144605b481d3fbdbc Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:44 +0200 Subject: ftrace: lockdep notrace annotations Add notrace annotations to lockdep to keep ftrace from causing recursive problems with lock tracing and debugging. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/lockdep.c | 23 ++++++++++++----------- kernel/spinlock.c | 2 +- 2 files changed, 13 insertions(+), 12 deletions(-) diff --git a/kernel/lockdep.c b/kernel/lockdep.c index e21924365ea3..ac46847ba0c9 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -271,14 +271,14 @@ static struct list_head chainhash_table[CHAINHASH_SIZE]; ((key1) >> (64-MAX_LOCKDEP_KEYS_BITS)) ^ \ (key2)) -void lockdep_off(void) +notrace void lockdep_off(void) { current->lockdep_recursion++; } EXPORT_SYMBOL(lockdep_off); -void lockdep_on(void) +notrace void lockdep_on(void) { current->lockdep_recursion--; } @@ -1041,7 +1041,7 @@ find_usage_forwards(struct lock_class *source, unsigned int depth) * Return 1 otherwise and keep unchanged. * Return 0 on error. */ -static noinline int +static noinline notrace int find_usage_backwards(struct lock_class *source, unsigned int depth) { struct lock_list *entry; @@ -1591,7 +1591,7 @@ static inline int validate_chain(struct task_struct *curr, * We are building curr_chain_key incrementally, so double-check * it from scratch, to make sure that it's done correctly: */ -static void check_chain_key(struct task_struct *curr) +static notrace void check_chain_key(struct task_struct *curr) { #ifdef CONFIG_DEBUG_LOCKDEP struct held_lock *hlock, *prev_hlock = NULL; @@ -1967,7 +1967,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this, /* * Mark all held locks with a usage bit: */ -static int +static notrace int mark_held_locks(struct task_struct *curr, int hardirq) { enum lock_usage_bit usage_bit; @@ -2260,8 +2260,8 @@ static inline int separate_irq_context(struct task_struct *curr, /* * Mark a lock with a usage bit, and validate the state transition: */ -static int mark_lock(struct task_struct *curr, struct held_lock *this, - enum lock_usage_bit new_bit) +static notrace int mark_lock(struct task_struct *curr, struct held_lock *this, + enum lock_usage_bit new_bit) { unsigned int new_mask = 1 << new_bit, ret = 1; @@ -2663,7 +2663,7 @@ __lock_release(struct lockdep_map *lock, int nested, unsigned long ip) /* * Check whether we follow the irq-flags state precisely: */ -static void check_flags(unsigned long flags) +static notrace void check_flags(unsigned long flags) { #if defined(CONFIG_DEBUG_LOCKDEP) && defined(CONFIG_TRACE_IRQFLAGS) if (!debug_locks) @@ -2700,8 +2700,8 @@ static void check_flags(unsigned long flags) * We are not always called with irqs disabled - do that here, * and also avoid lockdep recursion: */ -void lock_acquire(struct lockdep_map *lock, unsigned int subclass, - int trylock, int read, int check, unsigned long ip) +notrace void lock_acquire(struct lockdep_map *lock, unsigned int subclass, + int trylock, int read, int check, unsigned long ip) { unsigned long flags; @@ -2723,7 +2723,8 @@ void lock_acquire(struct lockdep_map *lock, unsigned int subclass, EXPORT_SYMBOL_GPL(lock_acquire); -void lock_release(struct lockdep_map *lock, int nested, unsigned long ip) +notrace void lock_release(struct lockdep_map *lock, int nested, + unsigned long ip) { unsigned long flags; diff --git a/kernel/spinlock.c b/kernel/spinlock.c index ae28c8245123..a1fb54c93cdd 100644 --- a/kernel/spinlock.c +++ b/kernel/spinlock.c @@ -436,7 +436,7 @@ int __lockfunc _spin_trylock_bh(spinlock_t *lock) } EXPORT_SYMBOL(_spin_trylock_bh); -int in_lock_functions(unsigned long addr) +notrace int in_lock_functions(unsigned long addr) { /* Linker adds these: start and end of __lockfunc functions */ extern char __lock_text_start[], __lock_text_end[]; -- cgit v1.2.3 From 18cef379d30f5ded20cc31d7f2d342639d39919d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:44 +0200 Subject: ftrace: don't use raw_local_irq_save/restore Using raw_local_irq_save/restore confuses lockdep. It's fine to use the normal ones. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 4 ++-- kernel/trace/trace_sched_switch.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index d7ad030a4c49..9175ce91b8f6 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -269,7 +269,7 @@ function_trace_call(unsigned long ip, unsigned long parent_ip) if (unlikely(!tracer_enabled)) return; - raw_local_irq_save(flags); + local_irq_save(flags); cpu = raw_smp_processor_id(); data = tr->data[cpu]; disabled = atomic_inc_return(&data->disabled); @@ -278,7 +278,7 @@ function_trace_call(unsigned long ip, unsigned long parent_ip) ftrace(tr, data, ip, parent_ip, flags); atomic_dec(&data->disabled); - raw_local_irq_restore(flags); + local_irq_restore(flags); } static struct ftrace_ops trace_ops __read_mostly = diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index 3e4771d3b890..2715267be469 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -29,7 +29,7 @@ ctx_switch_func(struct task_struct *prev, struct task_struct *next) if (!tracer_enabled) return; - raw_local_irq_save(flags); + local_irq_save(flags); cpu = raw_smp_processor_id(); data = tr->data[cpu]; disabled = atomic_inc_return(&data->disabled); @@ -38,7 +38,7 @@ ctx_switch_func(struct task_struct *prev, struct task_struct *next) tracing_sched_switch_trace(tr, data, prev, next, flags); atomic_dec(&data->disabled); - raw_local_irq_restore(flags); + local_irq_restore(flags); } void ftrace_ctx_switch(struct task_struct *prev, struct task_struct *next) -- cgit v1.2.3 From 89b2f97819dd074297bbe3e19eaa4afcc98845ad Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:44 +0200 Subject: ftrace: fix updates to max trace This patch fixes some bugs to the updating of the max trace that was caused by implementing the new buffering. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 6 +++++- kernel/trace/trace_irqsoff.c | 27 +++++++++++++++------------ 2 files changed, 20 insertions(+), 13 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 9175ce91b8f6..95966561ba3d 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -153,6 +153,7 @@ update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) memcpy(max_tr.data[i], data, sizeof(*data)); data->trace = save_trace; data->trace_pages = save_pages; + tracing_reset(data); } __update_max_tr(tr, tsk, cpu); @@ -183,6 +184,7 @@ update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu) memcpy(max_tr.data[cpu], data, sizeof(*data)); data->trace = save_trace; data->trace_pages = save_pages; + tracing_reset(data); __update_max_tr(tr, tsk, cpu); spin_unlock(&ftrace_max_lock); @@ -877,6 +879,8 @@ print_lat_fmt(struct seq_file *m, struct trace_iterator *iter, entry->ctx.next_prio, comm); break; + default: + seq_printf(m, "Unknown type %d\n", entry->type); } } @@ -1625,7 +1629,6 @@ __init static int tracer_alloc_buffers(void) * round up a bit. */ global_trace.entries = ENTRIES_PER_PAGE; - max_tr.entries = global_trace.entries; pages++; while (global_trace.entries < trace_nr_entries) { @@ -1633,6 +1636,7 @@ __init static int tracer_alloc_buffers(void) break; pages++; } + max_tr.entries = global_trace.entries; pr_info("tracer: %d pages allocated for %ld", pages, trace_nr_entries); diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index bd3f88198308..74165f611f36 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -23,6 +23,8 @@ static int tracer_enabled __read_mostly; static DEFINE_PER_CPU(int, tracing_cpu); +static DEFINE_SPINLOCK(max_trace_lock); + enum { TRACER_IRQS_OFF = (1 << 1), TRACER_PREEMPT_OFF = (1 << 2), @@ -126,7 +128,7 @@ check_critical_timing(struct trace_array *tr, int cpu) { unsigned long latency, t0, t1; - cycle_t T0, T1, T2, delta; + cycle_t T0, T1, delta; unsigned long flags; /* @@ -142,20 +144,18 @@ check_critical_timing(struct trace_array *tr, if (!report_latency(delta)) goto out; - ftrace(tr, data, CALLER_ADDR0, parent_ip, flags); - /* - * Update the timestamp, because the trace entry above - * might change it (it can only get larger so the latency - * is fair to be reported): - */ - T2 = now(cpu); + spin_lock(&max_trace_lock); - delta = T2-T0; + /* check if we are still the max latency */ + if (!report_latency(delta)) + goto out_unlock; + + ftrace(tr, data, CALLER_ADDR0, parent_ip, flags); latency = nsecs_to_usecs(delta); if (data->critical_sequence != max_sequence) - goto out; + goto out_unlock; tracing_max_latency = delta; t0 = nsecs_to_usecs(T0); @@ -189,6 +189,9 @@ check_critical_timing(struct trace_array *tr, max_sequence++; +out_unlock: + spin_unlock(&max_trace_lock); + out: data->critical_sequence = max_sequence; data->preempt_timestamp = now(cpu); @@ -366,14 +369,14 @@ void notrace trace_preempt_off(unsigned long a0, unsigned long a1) static void start_irqsoff_tracer(struct trace_array *tr) { - tracer_enabled = 1; register_ftrace_function(&trace_ops); + tracer_enabled = 1; } static void stop_irqsoff_tracer(struct trace_array *tr) { - unregister_ftrace_function(&trace_ops); tracer_enabled = 0; + unregister_ftrace_function(&trace_ops); } static void __irqsoff_tracer_init(struct trace_array *tr) -- cgit v1.2.3 From 57f50be14d57b0dbf88dd019e7bb0ff3a3dc7b81 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:44 +0200 Subject: ftrace: fix max latency Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 95966561ba3d..9bad2379115a 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -69,6 +69,11 @@ static int __init set_nr_entries(char *str) } __setup("trace_entries=", set_nr_entries); +unsigned long nsecs_to_usecs(unsigned long nsecs) +{ + return nsecs / 1000; +} + enum trace_type { __TRACE_FIRST_TYPE = 0, @@ -733,7 +738,7 @@ print_trace_header(struct seq_file *m, struct trace_iterator *iter) "---------------------------------\n"); seq_printf(m, " latency: %lu us, #%lu/%lu, CPU#%d |" " (M:%s VP:%d, KP:%d, SP:%d HP:%d", - data->saved_latency, + nsecs_to_usecs(data->saved_latency), entries, total, tr->cpu, @@ -771,11 +776,6 @@ print_trace_header(struct seq_file *m, struct trace_iterator *iter) seq_puts(m, "\n"); } -unsigned long nsecs_to_usecs(unsigned long nsecs) -{ - return nsecs / 1000; -} - static void notrace lat_print_generic(struct seq_file *m, struct trace_entry *entry, int cpu) { -- cgit v1.2.3 From e1c08bdd9fa73e44096e5a82c0d5928b04ab02c8 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:44 +0200 Subject: ftrace: force recording Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 4 ++++ kernel/trace/ftrace.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index a42390c1d6e1..2c1670c65236 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -54,6 +54,8 @@ struct dyn_ftrace { unsigned long flags; }; +int ftrace_force_update(void); + /* defined in arch */ extern int ftrace_ip_converted(unsigned long ip); extern unsigned char *ftrace_nop_replace(void); @@ -66,6 +68,8 @@ extern int ftrace_update_ftrace_func(ftrace_func_t func); extern void ftrace_caller(void); extern void ftrace_call(void); extern void mcount_call(void); +#else +# define ftrace_force_update() do { } while (0) #endif static inline void tracer_disable(void) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 97d5cb7b7e75..4facf5ceeb86 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -146,6 +146,10 @@ static int notrace __unregister_ftrace_function(struct ftrace_ops *ops) #ifdef CONFIG_DYNAMIC_FTRACE +static struct task_struct *ftraced_task; +static DECLARE_WAIT_QUEUE_HEAD(ftraced_waiters); +static unsigned long ftraced_iteration_counter; + enum { FTRACE_ENABLE_CALLS = (1 << 0), FTRACE_DISABLE_CALLS = (1 << 1), @@ -590,9 +594,12 @@ static int notrace ftraced(void *ignore) ftraced_trigger = 0; ftrace_record_suspend--; } + ftraced_iteration_counter++; mutex_unlock(&ftraced_lock); mutex_unlock(&ftrace_sysctl_lock); + wake_up_interruptible(&ftraced_waiters); + ftrace_shutdown_replenish(); set_current_state(TASK_INTERRUPTIBLE); @@ -1050,6 +1057,49 @@ static struct file_operations ftrace_filter_fops = { .release = ftrace_filter_release, }; +/** + * ftrace_force_update - force an update to all recording ftrace functions + * + * The ftrace dynamic update daemon only wakes up once a second. + * There may be cases where an update needs to be done immediately + * for tests or internal kernel tracing to begin. This function + * wakes the daemon to do an update and will not return until the + * update is complete. + */ +int ftrace_force_update(void) +{ + unsigned long last_counter; + DECLARE_WAITQUEUE(wait, current); + int ret = 0; + + if (!ftraced_task) + return -ENODEV; + + mutex_lock(&ftraced_lock); + last_counter = ftraced_iteration_counter; + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&ftraced_waiters, &wait); + + do { + mutex_unlock(&ftraced_lock); + wake_up_process(ftraced_task); + schedule(); + mutex_lock(&ftraced_lock); + if (signal_pending(current)) { + ret = -EINTR; + break; + } + set_current_state(TASK_INTERRUPTIBLE); + } while (last_counter == ftraced_iteration_counter); + + mutex_unlock(&ftraced_lock); + remove_wait_queue(&ftraced_waiters, &wait); + set_current_state(TASK_RUNNING); + + return ret; +} + static __init int ftrace_init_debugfs(void) { struct dentry *d_tracer; @@ -1095,6 +1145,7 @@ static int __init notrace ftrace_dynamic_init(void) return -1; last_ftrace_enabled = ftrace_enabled = 1; + ftraced_task = p; return 0; } -- cgit v1.2.3 From 60a11774b38fef1ab90b18c5353bd1c7c4d311c8 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:44 +0200 Subject: ftrace: add self-tests Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/Kconfig | 13 ++ kernel/trace/trace.c | 63 +++++- kernel/trace/trace.h | 31 +++ kernel/trace/trace_functions.c | 3 + kernel/trace/trace_irqsoff.c | 9 + kernel/trace/trace_sched_switch.c | 3 + kernel/trace/trace_sched_wakeup.c | 3 + kernel/trace/trace_selftest.c | 415 ++++++++++++++++++++++++++++++++++++++ 8 files changed, 538 insertions(+), 2 deletions(-) create mode 100644 kernel/trace/trace_selftest.c diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index cad9db1dee02..3f73a1710242 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -105,3 +105,16 @@ config DYNAMIC_FTRACE wakes up once a second and checks to see if any ftrace calls were made. If so, it runs stop_machine (stops all CPUS) and modifies the code to jump over the call to ftrace. + +config FTRACE_SELFTEST + bool + +config FTRACE_STARTUP_TEST + bool "Perform a startup test on ftrace" + depends on TRACING + select FTRACE_SELFTEST + help + This option performs a series of startup tests on ftrace. On bootup + a series of tests are made to verify that the tracer is + functioning properly. It will do tests on all the configured + tracers of ftrace. diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 9bad2379115a..f6d026f17dbb 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -32,6 +32,8 @@ unsigned long __read_mostly tracing_max_latency = (cycle_t)ULONG_MAX; unsigned long __read_mostly tracing_thresh; +static int tracing_disabled = 1; + static long notrace ns2usecs(cycle_t nsec) { @@ -217,11 +219,48 @@ int register_tracer(struct tracer *type) } } +#ifdef CONFIG_FTRACE_STARTUP_TEST + if (type->selftest) { + struct tracer *saved_tracer = current_trace; + struct trace_array_cpu *data; + struct trace_array *tr = &global_trace; + int saved_ctrl = tr->ctrl; + int i; + /* + * Run a selftest on this tracer. + * Here we reset the trace buffer, and set the current + * tracer to be this tracer. The tracer can then run some + * internal tracing to verify that everything is in order. + * If we fail, we do not register this tracer. + */ + for_each_possible_cpu(i) { + if (!data->trace) + continue; + data = tr->data[i]; + tracing_reset(data); + } + current_trace = type; + tr->ctrl = 0; + /* the test is responsible for initializing and enabling */ + pr_info("Testing tracer %s: ", type->name); + ret = type->selftest(type, tr); + /* the test is responsible for resetting too */ + current_trace = saved_tracer; + tr->ctrl = saved_ctrl; + if (ret) { + printk(KERN_CONT "FAILED!\n"); + goto out; + } + printk(KERN_CONT "PASSED\n"); + } +#endif + type->next = trace_types; trace_types = type; len = strlen(type->name); if (len > max_tracer_type_len) max_tracer_type_len = len; + out: mutex_unlock(&trace_types_lock); @@ -985,6 +1024,11 @@ __tracing_open(struct inode *inode, struct file *file, int *ret) { struct trace_iterator *iter; + if (tracing_disabled) { + *ret = -ENODEV; + return NULL; + } + iter = kzalloc(sizeof(*iter), GFP_KERNEL); if (!iter) { *ret = -ENOMEM; @@ -1023,6 +1067,9 @@ __tracing_open(struct inode *inode, struct file *file, int *ret) int tracing_open_generic(struct inode *inode, struct file *filp) { + if (tracing_disabled) + return -ENODEV; + filp->private_data = inode->i_private; return 0; } @@ -1128,6 +1175,9 @@ static int show_traces_open(struct inode *inode, struct file *file) { int ret; + if (tracing_disabled) + return -ENODEV; + ret = seq_open(file, &show_traces_seq_ops); if (!ret) { struct seq_file *m = file->private_data; @@ -1452,6 +1502,11 @@ struct dentry *tracing_init_dentry(void) return d_tracer; } +#ifdef CONFIG_FTRACE_SELFTEST +/* Let selftest have access to static functions in this file */ +#include "trace_selftest.c" +#endif + static __init void tracer_init_debugfs(void) { struct dentry *d_tracer; @@ -1585,6 +1640,7 @@ __init static int tracer_alloc_buffers(void) void *array; struct page *page; int pages = 0; + int ret = -ENOMEM; int i; /* Allocate the first page for all buffers */ @@ -1650,6 +1706,9 @@ __init static int tracer_alloc_buffers(void) register_tracer(&no_tracer); current_trace = &no_tracer; + /* All seems OK, enable tracing */ + tracing_disabled = 0; + return 0; free_buffers: @@ -1678,7 +1737,7 @@ __init static int tracer_alloc_buffers(void) } #endif } - return -ENOMEM; + return ret; } -device_initcall(tracer_alloc_buffers); +fs_initcall(tracer_alloc_buffers); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 83e257e38084..88edbf1f6788 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -99,6 +99,10 @@ struct tracer { void (*start)(struct trace_iterator *iter); void (*stop)(struct trace_iterator *iter); void (*ctrl_update)(struct trace_array *tr); +#ifdef CONFIG_FTRACE_STARTUP_TEST + int (*selftest)(struct tracer *trace, + struct trace_array *tr); +#endif struct tracer *next; int print_max; }; @@ -185,4 +189,31 @@ extern int unregister_tracer_switch(struct tracer_switch_ops *ops); extern unsigned long ftrace_update_tot_cnt; #endif +#ifdef CONFIG_FTRACE_STARTUP_TEST +#ifdef CONFIG_FTRACE +extern int trace_selftest_startup_function(struct tracer *trace, + struct trace_array *tr); +#endif +#ifdef CONFIG_IRQSOFF_TRACER +extern int trace_selftest_startup_irqsoff(struct tracer *trace, + struct trace_array *tr); +#endif +#ifdef CONFIG_PREEMPT_TRACER +extern int trace_selftest_startup_preemptoff(struct tracer *trace, + struct trace_array *tr); +#endif +#if defined(CONFIG_IRQSOFF_TRACER) && defined(CONFIG_PREEMPT_TRACER) +extern int trace_selftest_startup_preemptirqsoff(struct tracer *trace, + struct trace_array *tr); +#endif +#ifdef CONFIG_SCHED_TRACER +extern int trace_selftest_startup_wakeup(struct tracer *trace, + struct trace_array *tr); +#endif +#ifdef CONFIG_CONTEXT_SWITCH_TRACER +extern int trace_selftest_startup_sched_switch(struct tracer *trace, + struct trace_array *tr); +#endif +#endif /* CONFIG_FTRACE_STARTUP_TEST */ + #endif /* _LINUX_KERNEL_TRACE_H */ diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c index 82988c5336e0..5d8ad7a09605 100644 --- a/kernel/trace/trace_functions.c +++ b/kernel/trace/trace_functions.c @@ -63,6 +63,9 @@ static struct tracer function_trace __read_mostly = .init = function_trace_init, .reset = function_trace_reset, .ctrl_update = function_trace_ctrl_update, +#ifdef CONFIG_FTRACE_SELFTEST + .selftest = trace_selftest_startup_function, +#endif }; static __init int init_function_trace(void) diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index 74165f611f36..14183b8f79c5 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -432,6 +432,9 @@ static struct tracer irqsoff_tracer __read_mostly = .close = irqsoff_tracer_close, .ctrl_update = irqsoff_tracer_ctrl_update, .print_max = 1, +#ifdef CONFIG_FTRACE_SELFTEST + .selftest = trace_selftest_startup_irqsoff, +#endif }; # define register_irqsoff(trace) register_tracer(&trace) #else @@ -455,6 +458,9 @@ static struct tracer preemptoff_tracer __read_mostly = .close = irqsoff_tracer_close, .ctrl_update = irqsoff_tracer_ctrl_update, .print_max = 1, +#ifdef CONFIG_FTRACE_SELFTEST + .selftest = trace_selftest_startup_preemptoff, +#endif }; # define register_preemptoff(trace) register_tracer(&trace) #else @@ -480,6 +486,9 @@ static struct tracer preemptirqsoff_tracer __read_mostly = .close = irqsoff_tracer_close, .ctrl_update = irqsoff_tracer_ctrl_update, .print_max = 1, +#ifdef CONFIG_FTRACE_SELFTEST + .selftest = trace_selftest_startup_preemptirqsoff, +#endif }; # define register_preemptirqsoff(trace) register_tracer(&trace) diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index 2715267be469..6c9284103a62 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -107,6 +107,9 @@ static struct tracer sched_switch_trace __read_mostly = .init = sched_switch_trace_init, .reset = sched_switch_trace_reset, .ctrl_update = sched_switch_trace_ctrl_update, +#ifdef CONFIG_FTRACE_SELFTEST + .selftest = trace_selftest_startup_sched_switch, +#endif }; __init static int init_sched_switch_trace(void) diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 7c3ccefcf4c3..3d10ff01f805 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -295,6 +295,9 @@ static struct tracer wakeup_tracer __read_mostly = .close = wakeup_tracer_close, .ctrl_update = wakeup_tracer_ctrl_update, .print_max = 1, +#ifdef CONFIG_FTRACE_SELFTEST + .selftest = trace_selftest_startup_wakeup, +#endif }; __init static int init_wakeup_tracer(void) diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c new file mode 100644 index 000000000000..ef4d3cc009f5 --- /dev/null +++ b/kernel/trace/trace_selftest.c @@ -0,0 +1,415 @@ +/* Include in trace.c */ + +#include + +static inline int trace_valid_entry(struct trace_entry *entry) +{ + switch (entry->type) { + case TRACE_FN: + case TRACE_CTX: + return 1; + } + return 0; +} + +static int +trace_test_buffer_cpu(struct trace_array *tr, struct trace_array_cpu *data) +{ + struct page *page; + struct trace_entry *entries; + int idx = 0; + int i; + + page = list_entry(data->trace_pages.next, struct page, lru); + entries = page_address(page); + + if (data->trace != entries) + goto failed; + + /* + * The starting trace buffer always has valid elements, + * if any element exits. + */ + entries = data->trace; + + for (i = 0; i < tr->entries; i++) { + + if (i < data->trace_idx && + !trace_valid_entry(&entries[idx])) { + printk(KERN_CONT ".. invalid entry %d ", entries[idx].type); + goto failed; + } + + idx++; + if (idx >= ENTRIES_PER_PAGE) { + page = virt_to_page(entries); + if (page->lru.next == &data->trace_pages) { + if (i != tr->entries - 1) { + printk(KERN_CONT ".. entries buffer mismatch"); + goto failed; + } + } else { + page = list_entry(page->lru.next, struct page, lru); + entries = page_address(page); + } + idx = 0; + } + } + + page = virt_to_page(entries); + if (page->lru.next != &data->trace_pages) { + printk(KERN_CONT ".. too many entries"); + goto failed; + } + + return 0; + + failed: + printk(KERN_CONT ".. corrupted trace buffer .. "); + return -1; +} + +/* + * Test the trace buffer to see if all the elements + * are still sane. + */ +static int trace_test_buffer(struct trace_array *tr, unsigned long *count) +{ + unsigned long cnt = 0; + int cpu; + int ret = 0; + + for_each_possible_cpu(cpu) { + if (!tr->data[cpu]->trace) + continue; + + cnt += tr->data[cpu]->trace_idx; + printk("%d: count = %ld\n", cpu, cnt); + + ret = trace_test_buffer_cpu(tr, tr->data[cpu]); + if (ret) + break; + } + + if (count) + *count = cnt; + + return ret; +} + +#ifdef CONFIG_FTRACE +/* + * Simple verification test of ftrace function tracer. + * Enable ftrace, sleep 1/10 second, and then read the trace + * buffer to see if all is in order. + */ +int +trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr) +{ + unsigned long count; + int ret; + + /* make sure functions have been recorded */ + ret = ftrace_force_update(); + if (ret) { + printk(KERN_CONT ".. ftraced failed .. "); + return ret; + } + + /* start the tracing */ + tr->ctrl = 1; + trace->init(tr); + /* Sleep for a 1/10 of a second */ + msleep(100); + /* stop the tracing. */ + tr->ctrl = 0; + trace->ctrl_update(tr); + /* check the trace buffer */ + ret = trace_test_buffer(tr, &count); + trace->reset(tr); + + if (!ret && !count) { + printk(KERN_CONT ".. no entries found .."); + ret = -1; + } + + return ret; +} +#endif /* CONFIG_FTRACE */ + +#ifdef CONFIG_IRQSOFF_TRACER +int +trace_selftest_startup_irqsoff(struct tracer *trace, struct trace_array *tr) +{ + unsigned long save_max = tracing_max_latency; + unsigned long count; + int ret; + + /* start the tracing */ + tr->ctrl = 1; + trace->init(tr); + /* reset the max latency */ + tracing_max_latency = 0; + /* disable interrupts for a bit */ + local_irq_disable(); + udelay(100); + local_irq_enable(); + /* stop the tracing. */ + tr->ctrl = 0; + trace->ctrl_update(tr); + /* check both trace buffers */ + ret = trace_test_buffer(tr, NULL); + if (!ret) + ret = trace_test_buffer(&max_tr, &count); + trace->reset(tr); + + if (!ret && !count) { + printk(KERN_CONT ".. no entries found .."); + ret = -1; + } + + tracing_max_latency = save_max; + + return ret; +} +#endif /* CONFIG_IRQSOFF_TRACER */ + +#ifdef CONFIG_PREEMPT_TRACER +int +trace_selftest_startup_preemptoff(struct tracer *trace, struct trace_array *tr) +{ + unsigned long save_max = tracing_max_latency; + unsigned long count; + int ret; + + /* start the tracing */ + tr->ctrl = 1; + trace->init(tr); + /* reset the max latency */ + tracing_max_latency = 0; + /* disable preemption for a bit */ + preempt_disable(); + udelay(100); + preempt_enable(); + /* stop the tracing. */ + tr->ctrl = 0; + trace->ctrl_update(tr); + /* check both trace buffers */ + ret = trace_test_buffer(tr, NULL); + if (!ret) + ret = trace_test_buffer(&max_tr, &count); + trace->reset(tr); + + if (!ret && !count) { + printk(KERN_CONT ".. no entries found .."); + ret = -1; + } + + tracing_max_latency = save_max; + + return ret; +} +#endif /* CONFIG_PREEMPT_TRACER */ + +#if defined(CONFIG_IRQSOFF_TRACER) && defined(CONFIG_PREEMPT_TRACER) +int +trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) +{ + unsigned long save_max = tracing_max_latency; + unsigned long count; + int ret; + + /* start the tracing */ + tr->ctrl = 1; + trace->init(tr); + + /* reset the max latency */ + tracing_max_latency = 0; + + /* disable preemption and interrupts for a bit */ + preempt_disable(); + local_irq_disable(); + udelay(100); + preempt_enable(); + /* reverse the order of preempt vs irqs */ + local_irq_enable(); + + /* stop the tracing. */ + tr->ctrl = 0; + trace->ctrl_update(tr); + /* check both trace buffers */ + ret = trace_test_buffer(tr, NULL); + if (ret) + goto out; + + ret = trace_test_buffer(&max_tr, &count); + if (ret) + goto out; + + if (!ret && !count) { + printk(KERN_CONT ".. no entries found .."); + ret = -1; + goto out; + } + + /* do the test by disabling interrupts first this time */ + tracing_max_latency = 0; + tr->ctrl = 1; + trace->ctrl_update(tr); + preempt_disable(); + local_irq_disable(); + udelay(100); + preempt_enable(); + /* reverse the order of preempt vs irqs */ + local_irq_enable(); + + /* stop the tracing. */ + tr->ctrl = 0; + trace->ctrl_update(tr); + /* check both trace buffers */ + ret = trace_test_buffer(tr, NULL); + if (ret) + goto out; + + ret = trace_test_buffer(&max_tr, &count); + + if (!ret && !count) { + printk(KERN_CONT ".. no entries found .."); + ret = -1; + goto out; + } + + out: + trace->reset(tr); + tracing_max_latency = save_max; + + return ret; +} +#endif /* CONFIG_IRQSOFF_TRACER && CONFIG_PREEMPT_TRACER */ + +#ifdef CONFIG_SCHED_TRACER +static int trace_wakeup_test_thread(void *data) +{ + struct completion *x = data; + + /* Make this a RT thread, doesn't need to be too high */ + + rt_mutex_setprio(current, MAX_RT_PRIO - 5); + + /* Make it know we have a new prio */ + complete(x); + + /* now go to sleep and let the test wake us up */ + set_current_state(TASK_INTERRUPTIBLE); + schedule(); + + /* we are awake, now wait to disappear */ + while (!kthread_should_stop()) { + /* + * This is an RT task, do short sleeps to let + * others run. + */ + msleep(100); + } + + return 0; +} + +int +trace_selftest_startup_wakeup(struct tracer *trace, struct trace_array *tr) +{ + unsigned long save_max = tracing_max_latency; + struct task_struct *p; + struct completion isrt; + unsigned long count; + int ret; + + init_completion(&isrt); + + /* create a high prio thread */ + p = kthread_run(trace_wakeup_test_thread, &isrt, "ftrace-test"); + if (!IS_ERR(p)) { + printk(KERN_CONT "Failed to create ftrace wakeup test thread "); + return -1; + } + + /* make sure the thread is running at an RT prio */ + wait_for_completion(&isrt); + + /* start the tracing */ + tr->ctrl = 1; + trace->init(tr); + /* reset the max latency */ + tracing_max_latency = 0; + + /* sleep to let the RT thread sleep too */ + msleep(100); + + /* + * Yes this is slightly racy. It is possible that for some + * strange reason that the RT thread we created, did not + * call schedule for 100ms after doing the completion, + * and we do a wakeup on a task that already is awake. + * But that is extremely unlikely, and the worst thing that + * happens in such a case, is that we disable tracing. + * Honestly, if this race does happen something is horrible + * wrong with the system. + */ + + wake_up_process(p); + + /* stop the tracing. */ + tr->ctrl = 0; + trace->ctrl_update(tr); + /* check both trace buffers */ + ret = trace_test_buffer(tr, NULL); + if (!ret) + ret = trace_test_buffer(&max_tr, &count); + + + trace->reset(tr); + + tracing_max_latency = save_max; + + /* kill the thread */ + kthread_stop(p); + + if (!ret && !count) { + printk(KERN_CONT ".. no entries found .."); + ret = -1; + } + + return ret; +} +#endif /* CONFIG_SCHED_TRACER */ + +#ifdef CONFIG_CONTEXT_SWITCH_TRACER +int +trace_selftest_startup_sched_switch(struct tracer *trace, struct trace_array *tr) +{ + unsigned long count; + int ret; + + /* start the tracing */ + tr->ctrl = 1; + trace->init(tr); + /* Sleep for a 1/10 of a second */ + msleep(100); + /* stop the tracing. */ + tr->ctrl = 0; + trace->ctrl_update(tr); + /* check the trace buffer */ + ret = trace_test_buffer(tr, &count); + trace->reset(tr); + + if (!ret && !count) { + printk(KERN_CONT ".. no entries found .."); + ret = -1; + } + + return ret; +} +#endif /* CONFIG_CONTEXT_SWITCH_TRACER */ + +#ifdef CONFIG_DYNAMIC_FTRACE +#endif /* CONFIG_DYNAMIC_FTRACE */ -- cgit v1.2.3 From c7aafc549766b87819285d3480648fc652a47bc4 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:45 +0200 Subject: ftrace: cleanups factor out code and clean it up. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 2 +- kernel/trace/ftrace.c | 8 +-- kernel/trace/trace.c | 144 ++++++++++++++++++++++++-------------- kernel/trace/trace.h | 8 ++- kernel/trace/trace_irqsoff.c | 32 ++++----- kernel/trace/trace_sched_wakeup.c | 18 ++--- kernel/trace/trace_selftest.c | 25 ++++--- 7 files changed, 134 insertions(+), 103 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 2c1670c65236..953a36d6a199 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -69,7 +69,7 @@ extern void ftrace_caller(void); extern void ftrace_call(void); extern void mcount_call(void); #else -# define ftrace_force_update() do { } while (0) +# define ftrace_force_update() ({ 0; }) #endif static inline void tracer_disable(void) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 4facf5ceeb86..6d4d2e86debc 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -1152,10 +1152,10 @@ static int __init notrace ftrace_dynamic_init(void) core_initcall(ftrace_dynamic_init); #else -# define ftrace_startup() do { } while (0) -# define ftrace_shutdown() do { } while (0) -# define ftrace_startup_sysctl() do { } while (0) -# define ftrace_shutdown_sysctl() do { } while (0) +# define ftrace_startup() do { } while (0) +# define ftrace_shutdown() do { } while (0) +# define ftrace_startup_sysctl() do { } while (0) +# define ftrace_shutdown_sysctl() do { } while (0) #endif /* CONFIG_DYNAMIC_FTRACE */ /** diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index f6d026f17dbb..61d2f0228866 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -142,12 +142,59 @@ __update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) tracing_record_cmdline(current); } +void check_pages(struct trace_array_cpu *data) +{ + struct page *page, *tmp; + + BUG_ON(data->trace_pages.next->prev != &data->trace_pages); + BUG_ON(data->trace_pages.prev->next != &data->trace_pages); + + list_for_each_entry_safe(page, tmp, &data->trace_pages, lru) { + BUG_ON(page->lru.next->prev != &page->lru); + BUG_ON(page->lru.prev->next != &page->lru); + } +} + +void *head_page(struct trace_array_cpu *data) +{ + struct page *page; + + check_pages(data); + if (list_empty(&data->trace_pages)) + return NULL; + + page = list_entry(data->trace_pages.next, struct page, lru); + BUG_ON(&page->lru == &data->trace_pages); + + return page_address(page); +} + +notrace static void +flip_trace(struct trace_array_cpu *tr1, struct trace_array_cpu *tr2) +{ + struct list_head flip_pages; + + INIT_LIST_HEAD(&flip_pages); + + tr1->trace_current = NULL; + memcpy(&tr1->trace_current_idx, &tr2->trace_current_idx, + sizeof(struct trace_array_cpu) - + offsetof(struct trace_array_cpu, trace_current_idx)); + + check_pages(tr1); + check_pages(tr2); + list_splice_init(&tr1->trace_pages, &flip_pages); + list_splice_init(&tr2->trace_pages, &tr1->trace_pages); + list_splice_init(&flip_pages, &tr2->trace_pages); + BUG_ON(!list_empty(&flip_pages)); + check_pages(tr1); + check_pages(tr2); +} + notrace void update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) { struct trace_array_cpu *data; - void *save_trace; - struct list_head save_pages; int i; WARN_ON_ONCE(!irqs_disabled()); @@ -155,11 +202,7 @@ update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) /* clear out all the previous traces */ for_each_possible_cpu(i) { data = tr->data[i]; - save_trace = max_tr.data[i]->trace; - save_pages = max_tr.data[i]->trace_pages; - memcpy(max_tr.data[i], data, sizeof(*data)); - data->trace = save_trace; - data->trace_pages = save_pages; + flip_trace(max_tr.data[i], data); tracing_reset(data); } @@ -177,8 +220,6 @@ notrace void update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu) { struct trace_array_cpu *data = tr->data[cpu]; - void *save_trace; - struct list_head save_pages; int i; WARN_ON_ONCE(!irqs_disabled()); @@ -186,11 +227,8 @@ update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu) for_each_possible_cpu(i) tracing_reset(max_tr.data[i]); - save_trace = max_tr.data[cpu]->trace; - save_pages = max_tr.data[cpu]->trace_pages; - memcpy(max_tr.data[cpu], data, sizeof(*data)); - data->trace = save_trace; - data->trace_pages = save_pages; + flip_trace(max_tr.data[cpu], data); + tracing_reset(data); __update_max_tr(tr, tsk, cpu); @@ -234,9 +272,9 @@ int register_tracer(struct tracer *type) * If we fail, we do not register this tracer. */ for_each_possible_cpu(i) { - if (!data->trace) - continue; data = tr->data[i]; + if (!head_page(data)) + continue; tracing_reset(data); } current_trace = type; @@ -298,7 +336,7 @@ void unregister_tracer(struct tracer *type) void notrace tracing_reset(struct trace_array_cpu *data) { data->trace_idx = 0; - data->trace_current = data->trace; + data->trace_current = head_page(data); data->trace_current_idx = 0; } @@ -425,26 +463,31 @@ notrace void tracing_record_cmdline(struct task_struct *tsk) } static inline notrace struct trace_entry * -tracing_get_trace_entry(struct trace_array *tr, - struct trace_array_cpu *data) +tracing_get_trace_entry(struct trace_array *tr, struct trace_array_cpu *data) { unsigned long idx, idx_next; struct trace_entry *entry; - struct page *page; struct list_head *next; + struct page *page; data->trace_idx++; idx = data->trace_current_idx; idx_next = idx + 1; + BUG_ON(idx * TRACE_ENTRY_SIZE >= PAGE_SIZE); + entry = data->trace_current + idx * TRACE_ENTRY_SIZE; if (unlikely(idx_next >= ENTRIES_PER_PAGE)) { page = virt_to_page(data->trace_current); - if (unlikely(&page->lru == data->trace_pages.prev)) - next = data->trace_pages.next; - else - next = page->lru.next; + /* + * Roundrobin - but skip the head (which is not a real page): + */ + next = page->lru.next; + if (unlikely(next == &data->trace_pages)) + next = next->next; + BUG_ON(next == &data->trace_pages); + page = list_entry(next, struct page, lru); data->trace_current = page_address(page); idx_next = 0; @@ -456,18 +499,17 @@ tracing_get_trace_entry(struct trace_array *tr, } static inline notrace void -tracing_generic_entry_update(struct trace_entry *entry, - unsigned long flags) +tracing_generic_entry_update(struct trace_entry *entry, unsigned long flags) { struct task_struct *tsk = current; unsigned long pc; pc = preempt_count(); - entry->idx = atomic_inc_return(&tracer_counter); - entry->preempt_count = pc & 0xff; - entry->pid = tsk->pid; - entry->t = now(raw_smp_processor_id()); + entry->idx = atomic_inc_return(&tracer_counter); + entry->preempt_count = pc & 0xff; + entry->pid = tsk->pid; + entry->t = now(raw_smp_processor_id()); entry->flags = (irqs_disabled_flags(flags) ? TRACE_FLAG_IRQS_OFF : 0) | ((pc & HARDIRQ_MASK) ? TRACE_FLAG_HARDIRQ : 0) | ((pc & SOFTIRQ_MASK) ? TRACE_FLAG_SOFTIRQ : 0) | @@ -476,16 +518,15 @@ tracing_generic_entry_update(struct trace_entry *entry, notrace void ftrace(struct trace_array *tr, struct trace_array_cpu *data, - unsigned long ip, unsigned long parent_ip, - unsigned long flags) + unsigned long ip, unsigned long parent_ip, unsigned long flags) { struct trace_entry *entry; - entry = tracing_get_trace_entry(tr, data); + entry = tracing_get_trace_entry(tr, data); tracing_generic_entry_update(entry, flags); - entry->type = TRACE_FN; - entry->fn.ip = ip; - entry->fn.parent_ip = parent_ip; + entry->type = TRACE_FN; + entry->fn.ip = ip; + entry->fn.parent_ip = parent_ip; } notrace void @@ -496,7 +537,7 @@ tracing_sched_switch_trace(struct trace_array *tr, { struct trace_entry *entry; - entry = tracing_get_trace_entry(tr, data); + entry = tracing_get_trace_entry(tr, data); tracing_generic_entry_update(entry, flags); entry->type = TRACE_CTX; entry->ctx.prev_pid = prev->pid; @@ -540,6 +581,8 @@ trace_entry_idx(struct trace_array *tr, struct trace_array_cpu *data, } page = list_entry(iter->next_page[cpu], struct page, lru); + BUG_ON(&data->trace_pages == &page->lru); + array = page_address(page); return &array[iter->next_page_idx[cpu]]; @@ -554,7 +597,7 @@ find_next_entry(struct trace_iterator *iter, int *ent_cpu) int cpu; for_each_possible_cpu(cpu) { - if (!tr->data[cpu]->trace) + if (!head_page(tr->data[cpu])) continue; ent = trace_entry_idx(tr, tr->data[cpu], iter, cpu); if (ent && @@ -762,7 +805,7 @@ print_trace_header(struct seq_file *m, struct trace_iterator *iter) name = type->name; for_each_possible_cpu(cpu) { - if (tr->data[cpu]->trace) { + if (head_page(tr->data[cpu])) { total += tr->data[cpu]->trace_idx; if (tr->data[cpu]->trace_idx > tr->entries) entries += tr->entries; @@ -975,8 +1018,7 @@ static int trace_empty(struct trace_iterator *iter) for_each_possible_cpu(cpu) { data = iter->tr->data[cpu]; - if (data->trace && - data->trace_idx) + if (head_page(data) && data->trace_idx) return 0; } return 1; @@ -1576,9 +1618,9 @@ static struct tracer no_tracer __read_mostly = static int trace_alloc_page(void) { struct trace_array_cpu *data; - void *array; struct page *page, *tmp; LIST_HEAD(pages); + void *array; int i; /* first allocate a page for each CPU */ @@ -1610,14 +1652,14 @@ static int trace_alloc_page(void) for_each_possible_cpu(i) { data = global_trace.data[i]; page = list_entry(pages.next, struct page, lru); - list_del(&page->lru); + list_del_init(&page->lru); list_add_tail(&page->lru, &data->trace_pages); ClearPageLRU(page); #ifdef CONFIG_TRACER_MAX_TRACE data = max_tr.data[i]; page = list_entry(pages.next, struct page, lru); - list_del(&page->lru); + list_del_init(&page->lru); list_add_tail(&page->lru, &data->trace_pages); SetPageLRU(page); #endif @@ -1628,7 +1670,7 @@ static int trace_alloc_page(void) free_pages: list_for_each_entry_safe(page, tmp, &pages, lru) { - list_del(&page->lru); + list_del_init(&page->lru); __free_page(page); } return -ENOMEM; @@ -1654,7 +1696,6 @@ __init static int tracer_alloc_buffers(void) "for trace buffer!\n"); goto free_buffers; } - data->trace = array; /* set the array to the list */ INIT_LIST_HEAD(&data->trace_pages); @@ -1671,7 +1712,6 @@ __init static int tracer_alloc_buffers(void) "for trace buffer!\n"); goto free_buffers; } - max_tr.data[i]->trace = array; INIT_LIST_HEAD(&max_tr.data[i]->trace_pages); page = virt_to_page(array); @@ -1716,24 +1756,22 @@ __init static int tracer_alloc_buffers(void) struct page *page, *tmp; struct trace_array_cpu *data = global_trace.data[i]; - if (data && data->trace) { + if (data) { list_for_each_entry_safe(page, tmp, &data->trace_pages, lru) { - list_del(&page->lru); + list_del_init(&page->lru); __free_page(page); } - data->trace = NULL; } #ifdef CONFIG_TRACER_MAX_TRACE data = max_tr.data[i]; - if (data && data->trace) { + if (data) { list_for_each_entry_safe(page, tmp, &data->trace_pages, lru) { - list_del(&page->lru); + list_del_init(&page->lru); __free_page(page); } - data->trace = NULL; } #endif } diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 88edbf1f6788..cc1d34b8b771 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -53,12 +53,12 @@ struct trace_entry { * the trace, etc.) */ struct trace_array_cpu { - void *trace; void *trace_current; - unsigned trace_current_idx; struct list_head trace_pages; - unsigned long trace_idx; atomic_t disabled; + /* these fields get copied into max-trace: */ + unsigned trace_current_idx; + unsigned long trace_idx; unsigned long saved_latency; unsigned long critical_start; unsigned long critical_end; @@ -216,4 +216,6 @@ extern int trace_selftest_startup_sched_switch(struct tracer *trace, #endif #endif /* CONFIG_FTRACE_STARTUP_TEST */ +extern void *head_page(struct trace_array_cpu *data); + #endif /* _LINUX_KERNEL_TRACE_H */ diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index 14183b8f79c5..2dfebb67fdfb 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -144,7 +144,7 @@ check_critical_timing(struct trace_array *tr, if (!report_latency(delta)) goto out; - spin_lock(&max_trace_lock); + spin_lock_irqsave(&max_trace_lock, flags); /* check if we are still the max latency */ if (!report_latency(delta)) @@ -165,32 +165,24 @@ check_critical_timing(struct trace_array *tr, update_max_tr_single(tr, current, cpu); - if (tracing_thresh) - printk(KERN_INFO "(%16s-%-5d|#%d): %lu us critical section " - "violates %lu us threshold.\n" - " => started at timestamp %lu: ", + if (tracing_thresh) { + printk(KERN_INFO "(%16s-%-5d|#%d):" + " %lu us critical section violates %lu us threshold.\n", current->comm, current->pid, raw_smp_processor_id(), - latency, nsecs_to_usecs(tracing_thresh), t0); - else + latency, nsecs_to_usecs(tracing_thresh)); + } else { printk(KERN_INFO "(%16s-%-5d|#%d):" - " new %lu us maximum-latency " - "critical section.\n => started at timestamp %lu: ", + " new %lu us maximum-latency critical section.\n", current->comm, current->pid, raw_smp_processor_id(), - latency, t0); - - print_symbol(KERN_CONT "<%s>\n", data->critical_start); - printk(KERN_CONT " => ended at timestamp %lu: ", t1); - print_symbol(KERN_CONT "<%s>\n", data->critical_end); - dump_stack(); - t1 = nsecs_to_usecs(now(cpu)); - printk(KERN_CONT " => dump-end timestamp %lu\n\n", t1); + latency); + } max_sequence++; out_unlock: - spin_unlock(&max_trace_lock); + spin_unlock_irqrestore(&max_trace_lock, flags); out: data->critical_sequence = max_sequence; @@ -216,7 +208,7 @@ start_critical_timing(unsigned long ip, unsigned long parent_ip) cpu = raw_smp_processor_id(); data = tr->data[cpu]; - if (unlikely(!data) || unlikely(!data->trace) || + if (unlikely(!data) || unlikely(!head_page(data)) || atomic_read(&data->disabled)) return; @@ -256,7 +248,7 @@ stop_critical_timing(unsigned long ip, unsigned long parent_ip) cpu = raw_smp_processor_id(); data = tr->data[cpu]; - if (unlikely(!data) || unlikely(!data->trace) || + if (unlikely(!data) || unlikely(!head_page(data)) || !data->critical_start || atomic_read(&data->disabled)) return; diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 3d10ff01f805..688df965f3f2 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -107,24 +107,18 @@ wakeup_sched_switch(struct task_struct *prev, struct task_struct *next) update_max_tr(tr, wakeup_task, wakeup_cpu); if (tracing_thresh) { - printk(KERN_INFO "(%16s-%-5d|#%d): %lu us wakeup latency " - "violates %lu us threshold.\n" - " => started at timestamp %lu: ", + printk(KERN_INFO "(%16s-%-5d|#%d):" + " %lu us wakeup latency violates %lu us threshold.\n", wakeup_task->comm, wakeup_task->pid, raw_smp_processor_id(), - latency, nsecs_to_usecs(tracing_thresh), t0); + latency, nsecs_to_usecs(tracing_thresh)); } else { - printk(KERN_INFO "(%16s-%-5d|#%d): new %lu us maximum " - "wakeup latency.\n => started at timestamp %lu: ", + printk(KERN_INFO "(%16s-%-5d|#%d):" + " new %lu us maximum wakeup latency.\n", wakeup_task->comm, wakeup_task->pid, - cpu, latency, t0); + cpu, latency); } - printk(KERN_CONT " ended at timestamp %lu: ", t1); - dump_stack(); - t1 = nsecs_to_usecs(now(cpu)); - printk(KERN_CONT " dump-end timestamp %lu\n\n", t1); - out_unlock: __wakeup_reset(tr); spin_unlock_irqrestore(&wakeup_lock, flags); diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index ef4d3cc009f5..c01874c3b1f9 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -1,6 +1,7 @@ /* Include in trace.c */ #include +#include static inline int trace_valid_entry(struct trace_entry *entry) { @@ -15,28 +16,29 @@ static inline int trace_valid_entry(struct trace_entry *entry) static int trace_test_buffer_cpu(struct trace_array *tr, struct trace_array_cpu *data) { - struct page *page; struct trace_entry *entries; + struct page *page; int idx = 0; int i; + BUG_ON(list_empty(&data->trace_pages)); page = list_entry(data->trace_pages.next, struct page, lru); entries = page_address(page); - if (data->trace != entries) + if (head_page(data) != entries) goto failed; /* * The starting trace buffer always has valid elements, - * if any element exits. + * if any element exists. */ - entries = data->trace; + entries = head_page(data); for (i = 0; i < tr->entries; i++) { - if (i < data->trace_idx && - !trace_valid_entry(&entries[idx])) { - printk(KERN_CONT ".. invalid entry %d ", entries[idx].type); + if (i < data->trace_idx && !trace_valid_entry(&entries[idx])) { + printk(KERN_CONT ".. invalid entry %d ", + entries[idx].type); goto failed; } @@ -80,11 +82,10 @@ static int trace_test_buffer(struct trace_array *tr, unsigned long *count) int ret = 0; for_each_possible_cpu(cpu) { - if (!tr->data[cpu]->trace) + if (!head_page(tr->data[cpu])) continue; cnt += tr->data[cpu]->trace_idx; - printk("%d: count = %ld\n", cpu, cnt); ret = trace_test_buffer_cpu(tr, tr->data[cpu]); if (ret) @@ -117,6 +118,8 @@ trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr) } /* start the tracing */ + ftrace_enabled = 1; + tr->ctrl = 1; trace->init(tr); /* Sleep for a 1/10 of a second */ @@ -124,6 +127,8 @@ trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr) /* stop the tracing. */ tr->ctrl = 0; trace->ctrl_update(tr); + ftrace_enabled = 0; + /* check the trace buffer */ ret = trace_test_buffer(tr, &count); trace->reset(tr); @@ -328,7 +333,7 @@ trace_selftest_startup_wakeup(struct tracer *trace, struct trace_array *tr) /* create a high prio thread */ p = kthread_run(trace_wakeup_test_thread, &isrt, "ftrace-test"); - if (!IS_ERR(p)) { + if (IS_ERR(p)) { printk(KERN_CONT "Failed to create ftrace wakeup test thread "); return -1; } -- cgit v1.2.3 From 7bd2f24c2f769e3f8f1d4fc8b9fddf689825f6a7 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:45 +0200 Subject: ftrace: add README make it easier for newbies to find their way around. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 40 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 39 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 61d2f0228866..c736dd2e068d 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -995,6 +995,7 @@ print_trace_fmt(struct seq_file *m, struct trace_iterator *iter) seq_printf(m, " <-"); seq_print_ip_sym(m, entry->fn.parent_ip, sym_flags); } + seq_printf(m, "\n"); break; case TRACE_CTX: S = entry->ctx.prev_state < sizeof(state_to_char) ? @@ -1007,7 +1008,6 @@ print_trace_fmt(struct seq_file *m, struct trace_iterator *iter) entry->ctx.next_prio); break; } - seq_printf(m, "\n"); } static int trace_empty(struct trace_iterator *iter) @@ -1332,6 +1332,39 @@ static struct file_operations tracing_iter_fops = { .write = tracing_iter_ctrl_write, }; +static const char readme_msg[] = + "tracing mini-HOWTO:\n\n" + "# mkdir /debug\n" + "# mount -t debugfs nodev /debug\n\n" + "# cat /debug/tracing/available_tracers\n" + "wakeup preemptirqsoff preemptoff irqsoff ftrace sched_switch none\n\n" + "# cat /debug/tracing/current_tracer\n" + "none\n" + "# echo sched_switch > /debug/tracing/current_tracer\n" + "# cat /debug/tracing/current_tracer\n" + "sched_switch\n" + "# cat /debug/tracing/iter_ctrl\n" + "noprint-parent nosym-offset nosym-addr noverbose\n" + "# echo print-parent > /debug/tracing/iter_ctrl\n" + "# echo 1 > /debug/tracing/tracing_enabled\n" + "# cat /debug/tracing/trace > /tmp/trace.txt\n" + "echo 0 > /debug/tracing/tracing_enabled\n" +; + +static ssize_t +tracing_readme_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + return simple_read_from_buffer(ubuf, cnt, ppos, + readme_msg, strlen(readme_msg)); +} + +static struct file_operations tracing_readme_fops = { + .open = tracing_open_generic, + .read = tracing_readme_read, +}; + + static ssize_t tracing_ctrl_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos) @@ -1598,6 +1631,11 @@ static __init void tracer_init_debugfs(void) if (!entry) pr_warning("Could not create debugfs " "'tracing_threash' entry\n"); + entry = debugfs_create_file("README", 0644, d_tracer, + NULL, &tracing_readme_fops); + if (!entry) + pr_warning("Could not create debugfs 'README' entry\n"); + #ifdef CONFIG_DYNAMIC_FTRACE entry = debugfs_create_file("dyn_ftrace_total_info", 0444, d_tracer, -- cgit v1.2.3 From 77a2b37d227483fe52aead242652aee406c25bf0 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:45 +0200 Subject: ftrace: startup tester on dynamic tracing. This patch adds a startup self test on dynamic code modification and filters. The test filters on a specific function, makes sure that no other function is traced, exectutes the function, then makes sure that the function is traced. This patch also fixes a slight bug with the ftrace selftest, where tracer_enabled was not being set. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 2 + kernel/trace/ftrace.c | 19 +++++++ kernel/trace/trace_selftest.c | 113 ++++++++++++++++++++++++++++++++++++++++-- 3 files changed, 130 insertions(+), 4 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 953a36d6a199..a842d96c6343 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -55,6 +55,7 @@ struct dyn_ftrace { }; int ftrace_force_update(void); +void ftrace_set_filter(unsigned char *buf, int len, int reset); /* defined in arch */ extern int ftrace_ip_converted(unsigned long ip); @@ -70,6 +71,7 @@ extern void ftrace_call(void); extern void mcount_call(void); #else # define ftrace_force_update() ({ 0; }) +# define ftrace_set_filter(buf, len, reset) do { } while (0) #endif static inline void tracer_disable(void) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 6d4d2e86debc..5e9389faaf75 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -1010,6 +1010,25 @@ ftrace_filter_write(struct file *file, const char __user *ubuf, return ret; } +/** + * ftrace_set_filter - set a function to filter on in ftrace + * @buf - the string that holds the function filter text. + * @len - the length of the string. + * @reset - non zero to reset all filters before applying this filter. + * + * Filters denote which functions should be enabled when tracing is enabled. + * If @buf is NULL and reset is set, all functions will be enabled for tracing. + */ +notrace void ftrace_set_filter(unsigned char *buf, int len, int reset) +{ + mutex_lock(&ftrace_filter_lock); + if (reset) + ftrace_filter_reset(); + if (buf) + ftrace_match(buf, len); + mutex_unlock(&ftrace_filter_lock); +} + static int notrace ftrace_filter_release(struct inode *inode, struct file *file) { diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index c01874c3b1f9..4c8a1b2d8231 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -99,6 +99,100 @@ static int trace_test_buffer(struct trace_array *tr, unsigned long *count) } #ifdef CONFIG_FTRACE + +#ifdef CONFIG_DYNAMIC_FTRACE + +#define DYN_FTRACE_TEST_NAME trace_selftest_dynamic_test_func +#define __STR(x) #x +#define STR(x) __STR(x) +static int DYN_FTRACE_TEST_NAME(void) +{ + /* used to call mcount */ + return 0; +} + +/* Test dynamic code modification and ftrace filters */ +int trace_selftest_startup_dynamic_tracing(struct tracer *trace, + struct trace_array *tr, + int (*func)(void)) +{ + unsigned long count; + int ret; + int save_ftrace_enabled = ftrace_enabled; + int save_tracer_enabled = tracer_enabled; + + /* The ftrace test PASSED */ + printk(KERN_CONT "PASSED\n"); + pr_info("Testing dynamic ftrace: "); + + /* enable tracing, and record the filter function */ + ftrace_enabled = 1; + tracer_enabled = 1; + + /* passed in by parameter to fool gcc from optimizing */ + func(); + + /* update the records */ + ret = ftrace_force_update(); + if (ret) { + printk(KERN_CONT ".. ftraced failed .. "); + return ret; + } + + /* filter only on our function */ + ftrace_set_filter(STR(DYN_FTRACE_TEST_NAME), + sizeof(STR(DYN_FTRACE_TEST_NAME)), 1); + + /* enable tracing */ + tr->ctrl = 1; + trace->init(tr); + /* Sleep for a 1/10 of a second */ + msleep(100); + + /* we should have nothing in the buffer */ + ret = trace_test_buffer(tr, &count); + if (ret) + goto out; + + if (count) { + ret = -1; + printk(KERN_CONT ".. filter did not filter .. "); + goto out; + } + + /* call our function again */ + func(); + + /* sleep again */ + msleep(100); + + /* stop the tracing. */ + tr->ctrl = 0; + trace->ctrl_update(tr); + ftrace_enabled = 0; + + /* check the trace buffer */ + ret = trace_test_buffer(tr, &count); + trace->reset(tr); + + /* we should only have one item */ + if (!ret && count != 1) { + printk(KERN_CONT ".. filter failed .."); + ret = -1; + goto out; + } + out: + ftrace_enabled = save_ftrace_enabled; + tracer_enabled = save_tracer_enabled; + + /* Enable tracing on all functions again */ + ftrace_set_filter(NULL, 0, 1); + + return ret; +} +#else +# define trace_selftest_startup_dynamic_tracing(trace, tr, func) ({ 0; }) +#endif /* CONFIG_DYNAMIC_FTRACE */ /* * Simple verification test of ftrace function tracer. * Enable ftrace, sleep 1/10 second, and then read the trace @@ -109,8 +203,13 @@ trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr) { unsigned long count; int ret; + int save_ftrace_enabled = ftrace_enabled; + int save_tracer_enabled = tracer_enabled; - /* make sure functions have been recorded */ + /* make sure msleep has been recorded */ + msleep(1); + + /* force the recorded functions to be traced */ ret = ftrace_force_update(); if (ret) { printk(KERN_CONT ".. ftraced failed .. "); @@ -119,6 +218,7 @@ trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr) /* start the tracing */ ftrace_enabled = 1; + tracer_enabled = 1; tr->ctrl = 1; trace->init(tr); @@ -136,8 +236,16 @@ trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr) if (!ret && !count) { printk(KERN_CONT ".. no entries found .."); ret = -1; + goto out; } + ret = trace_selftest_startup_dynamic_tracing(trace, tr, + DYN_FTRACE_TEST_NAME); + + out: + ftrace_enabled = save_ftrace_enabled; + tracer_enabled = save_tracer_enabled; + return ret; } #endif /* CONFIG_FTRACE */ @@ -415,6 +523,3 @@ trace_selftest_startup_sched_switch(struct tracer *trace, struct trace_array *tr return ret; } #endif /* CONFIG_CONTEXT_SWITCH_TRACER */ - -#ifdef CONFIG_DYNAMIC_FTRACE -#endif /* CONFIG_DYNAMIC_FTRACE */ -- cgit v1.2.3 From 4e3c3333f3bd7eedfd21b1155b3c7cd24fc7f754 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:45 +0200 Subject: ftrace: fix time offset fix time offset calculations and ordering, plus make code more consistent. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 75 ++++++++++++++++++++++++++++++++++++++-------------- kernel/trace/trace.h | 9 ++++++- 2 files changed, 63 insertions(+), 21 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index c736dd2e068d..8755a4370484 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -120,7 +120,7 @@ static DEFINE_SPINLOCK(ftrace_max_lock); * structure. (this way the maximum trace is permanently saved, * for later retrieval via /debugfs/tracing/latency_trace) */ -static void notrace +static notrace void __update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) { struct trace_array_cpu *data = tr->data[cpu]; @@ -333,15 +333,16 @@ void unregister_tracer(struct tracer *type) mutex_unlock(&trace_types_lock); } -void notrace tracing_reset(struct trace_array_cpu *data) +notrace void tracing_reset(struct trace_array_cpu *data) { data->trace_idx = 0; data->trace_current = head_page(data); data->trace_current_idx = 0; + data->time_offset = 0; } #ifdef CONFIG_FTRACE -static void notrace +static notrace void function_trace_call(unsigned long ip, unsigned long parent_ip) { struct trace_array *tr = &global_trace; @@ -398,7 +399,7 @@ static void trace_init_cmdlines(void) notrace void trace_stop_cmdline_recording(void); -static void notrace trace_save_cmdline(struct task_struct *tsk) +static notrace void trace_save_cmdline(struct task_struct *tsk) { unsigned map; unsigned idx; @@ -624,6 +625,7 @@ static void *find_next_entry_inc(struct trace_iterator *iter) iter->idx++; iter->next_idx[next_cpu]++; iter->next_page_idx[next_cpu]++; + if (iter->next_page_idx[next_cpu] >= ENTRIES_PER_PAGE) { struct trace_array_cpu *data = iter->tr->data[next_cpu]; @@ -635,19 +637,21 @@ static void *find_next_entry_inc(struct trace_iterator *iter) data->trace_pages.next; } } + iter->prev_ent = iter->ent; + iter->prev_cpu = iter->cpu; + iter->ent = next; iter->cpu = next_cpu; return next ? iter : NULL; } -static void notrace * -s_next(struct seq_file *m, void *v, loff_t *pos) +static notrace void *s_next(struct seq_file *m, void *v, loff_t *pos) { struct trace_iterator *iter = m->private; - void *ent; void *last_ent = iter->ent; int i = (int)*pos; + void *ent; (*pos)++; @@ -693,6 +697,8 @@ static void *s_start(struct seq_file *m, loff_t *pos) iter->ent = NULL; iter->cpu = 0; iter->idx = -1; + iter->prev_ent = NULL; + iter->prev_cpu = -1; for_each_possible_cpu(i) { iter->next_idx[i] = 0; @@ -752,7 +758,7 @@ seq_print_sym_offset(struct seq_file *m, const char *fmt, unsigned long address) # define IP_FMT "%016lx" #endif -static void notrace +static notrace void seq_print_ip_sym(struct seq_file *m, unsigned long ip, unsigned long sym_flags) { if (!ip) { @@ -769,7 +775,7 @@ seq_print_ip_sym(struct seq_file *m, unsigned long ip, unsigned long sym_flags) seq_printf(m, " <" IP_FMT ">", ip); } -static void notrace print_lat_help_header(struct seq_file *m) +static notrace void print_lat_help_header(struct seq_file *m) { seq_puts(m, "# _------=> CPU# \n"); seq_puts(m, "# / _-----=> irqs-off \n"); @@ -782,14 +788,14 @@ static void notrace print_lat_help_header(struct seq_file *m) seq_puts(m, "# \\ / ||||| \\ | / \n"); } -static void notrace print_func_help_header(struct seq_file *m) +static notrace void print_func_help_header(struct seq_file *m) { seq_puts(m, "# TASK-PID CPU# TIMESTAMP FUNCTION\n"); seq_puts(m, "# | | | | |\n"); } -static void notrace +static notrace void print_trace_header(struct seq_file *m, struct trace_iterator *iter) { unsigned long sym_flags = (trace_flags & TRACE_ITER_SYM_MASK); @@ -858,7 +864,7 @@ print_trace_header(struct seq_file *m, struct trace_iterator *iter) seq_puts(m, "\n"); } -static void notrace +static notrace void lat_print_generic(struct seq_file *m, struct trace_entry *entry, int cpu) { int hardirq, softirq; @@ -895,7 +901,7 @@ lat_print_generic(struct seq_file *m, struct trace_entry *entry, int cpu) unsigned long preempt_mark_thresh = 100; -static void notrace +static notrace void lat_print_timestamp(struct seq_file *m, unsigned long long abs_usecs, unsigned long rel_usecs) { @@ -910,7 +916,7 @@ lat_print_timestamp(struct seq_file *m, unsigned long long abs_usecs, static const char state_to_char[] = TASK_STATE_TO_CHAR_STR; -static void notrace +static notrace void print_lat_fmt(struct seq_file *m, struct trace_iterator *iter, unsigned int trace_idx, int cpu) { @@ -966,20 +972,50 @@ print_lat_fmt(struct seq_file *m, struct trace_iterator *iter, } } -static void notrace +static notrace void sync_time_offset(struct trace_iterator *iter) +{ + struct trace_array_cpu *prev_array, *array; + struct trace_entry *prev_entry, *entry; + cycle_t prev_t, t; + + entry = iter->ent; + prev_entry = iter->prev_ent; + if (!prev_entry) + return; + + prev_array = iter->tr->data[iter->prev_cpu]; + array = iter->tr->data[iter->cpu]; + + prev_t = prev_entry->t + prev_array->time_offset; + t = entry->t + array->time_offset; + + /* + * If time goes backwards we increase the offset of + * the current array, to not have observable time warps. + * This will quickly synchronize the time offsets of + * multiple CPUs: + */ + if (t < prev_t) + array->time_offset += prev_t - t; +} + +static notrace void print_trace_fmt(struct seq_file *m, struct trace_iterator *iter) { unsigned long sym_flags = (trace_flags & TRACE_ITER_SYM_MASK); - struct trace_entry *entry = iter->ent; + struct trace_entry *entry; unsigned long usec_rem; unsigned long long t; unsigned long secs; char *comm; int S; + sync_time_offset(iter); + entry = iter->ent; + comm = trace_find_cmdline(iter->ent->pid); - t = ns2usecs(entry->t); + t = ns2usecs(entry->t + iter->tr->data[iter->cpu]->time_offset); usec_rem = do_div(t, 1000000ULL); secs = (unsigned long)t; @@ -1158,7 +1194,7 @@ static int tracing_lt_open(struct inode *inode, struct file *file) } -static void notrace * +static notrace void * t_next(struct seq_file *m, void *v, loff_t *pos) { struct tracer *t = m->private; @@ -1374,8 +1410,7 @@ tracing_ctrl_read(struct file *filp, char __user *ubuf, int r; r = sprintf(buf, "%ld\n", tr->ctrl); - return simple_read_from_buffer(ubuf, cnt, ppos, - buf, r); + return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); } static ssize_t diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index cc1d34b8b771..5df8ff2b84a7 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -56,6 +56,8 @@ struct trace_array_cpu { void *trace_current; struct list_head trace_pages; atomic_t disabled; + cycle_t time_offset; + /* these fields get copied into max-trace: */ unsigned trace_current_idx; unsigned long trace_idx; @@ -114,14 +116,19 @@ struct tracer { struct trace_iterator { struct trace_array *tr; struct tracer *trace; + struct trace_entry *ent; + int cpu; + + struct trace_entry *prev_ent; + int prev_cpu; + unsigned long iter_flags; loff_t pos; unsigned long next_idx[NR_CPUS]; struct list_head *next_page[NR_CPUS]; unsigned next_page_idx[NR_CPUS]; long idx; - int cpu; }; void notrace tracing_reset(struct trace_array_cpu *data); -- cgit v1.2.3 From 08bafa0efcf29fe18ec39c2147077b597368b018 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:45 +0200 Subject: ftrace: disable all tracers on corrupted buffer If the trace buffer is detected to be corrupted, then we disable all tracers. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_selftest.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index 4c8a1b2d8231..a6f1ed75f836 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -67,6 +67,8 @@ trace_test_buffer_cpu(struct trace_array *tr, struct trace_array_cpu *data) return 0; failed: + /* disable tracing */ + tracing_disabled = 1; printk(KERN_CONT ".. corrupted trace buffer .. "); return -1; } -- cgit v1.2.3 From 1d4db00a5e30c7b8f8dc2a1b19e886fd942be143 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:45 +0200 Subject: ftrace: reset selftests The tests may leave stuff in the buffers. This resets the buffers after each test is run. If a test fails, it does not reset the buffer to avoid touching a buffer that is corrupted. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 8755a4370484..6580e7ed04be 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -289,6 +289,13 @@ int register_tracer(struct tracer *type) printk(KERN_CONT "FAILED!\n"); goto out; } + /* Only reset on passing, to avoid touching corrupted buffers */ + for_each_possible_cpu(i) { + data = tr->data[i]; + if (!head_page(data)) + continue; + tracing_reset(data); + } printk(KERN_CONT "PASSED\n"); } #endif -- cgit v1.2.3 From 93a588f459da134be6ab17c4104e28441beb0d22 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:45 +0200 Subject: ftrace: change buffers to producer consumer This patch changes the way the CPU trace buffers are handled. Instead of always starting from the trace page head, the logic is changed to a producer consumer logic. This allows for the buffers to be drained while they are alive. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 103 ++++++++++++++++++++++++++++++--------------------- kernel/trace/trace.h | 6 ++- 2 files changed, 65 insertions(+), 44 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 6580e7ed04be..777b859e1c2e 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -176,10 +176,9 @@ flip_trace(struct trace_array_cpu *tr1, struct trace_array_cpu *tr2) INIT_LIST_HEAD(&flip_pages); - tr1->trace_current = NULL; - memcpy(&tr1->trace_current_idx, &tr2->trace_current_idx, + memcpy(&tr1->trace_head_idx, &tr2->trace_head_idx, sizeof(struct trace_array_cpu) - - offsetof(struct trace_array_cpu, trace_current_idx)); + offsetof(struct trace_array_cpu, trace_head_idx)); check_pages(tr1); check_pages(tr2); @@ -228,7 +227,6 @@ update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu) tracing_reset(max_tr.data[i]); flip_trace(max_tr.data[cpu], data); - tracing_reset(data); __update_max_tr(tr, tsk, cpu); @@ -343,9 +341,9 @@ void unregister_tracer(struct tracer *type) notrace void tracing_reset(struct trace_array_cpu *data) { data->trace_idx = 0; - data->trace_current = head_page(data); - data->trace_current_idx = 0; - data->time_offset = 0; + data->trace_head = data->trace_tail = head_page(data); + data->trace_head_idx = 0; + data->trace_tail_idx = 0; } #ifdef CONFIG_FTRACE @@ -470,38 +468,65 @@ notrace void tracing_record_cmdline(struct task_struct *tsk) trace_save_cmdline(tsk); } +static inline notrace struct list_head * +trace_next_list(struct trace_array_cpu *data, struct list_head *next) +{ + /* + * Roundrobin - but skip the head (which is not a real page): + */ + next = next->next; + if (unlikely(next == &data->trace_pages)) + next = next->next; + BUG_ON(next == &data->trace_pages); + + return next; +} + +static inline notrace void * +trace_next_page(struct trace_array_cpu *data, void *addr) +{ + struct list_head *next; + struct page *page; + + page = virt_to_page(addr); + + next = trace_next_list(data, &page->lru); + page = list_entry(next, struct page, lru); + + return page_address(page); +} + static inline notrace struct trace_entry * tracing_get_trace_entry(struct trace_array *tr, struct trace_array_cpu *data) { unsigned long idx, idx_next; struct trace_entry *entry; - struct list_head *next; - struct page *page; data->trace_idx++; - idx = data->trace_current_idx; + idx = data->trace_head_idx; idx_next = idx + 1; BUG_ON(idx * TRACE_ENTRY_SIZE >= PAGE_SIZE); - entry = data->trace_current + idx * TRACE_ENTRY_SIZE; + entry = data->trace_head + idx * TRACE_ENTRY_SIZE; if (unlikely(idx_next >= ENTRIES_PER_PAGE)) { - page = virt_to_page(data->trace_current); - /* - * Roundrobin - but skip the head (which is not a real page): - */ - next = page->lru.next; - if (unlikely(next == &data->trace_pages)) - next = next->next; - BUG_ON(next == &data->trace_pages); - - page = list_entry(next, struct page, lru); - data->trace_current = page_address(page); + data->trace_head = trace_next_page(data, data->trace_head); idx_next = 0; } - data->trace_current_idx = idx_next; + if (data->trace_head == data->trace_tail && + idx_next == data->trace_tail_idx) { + /* overrun */ + data->trace_tail_idx++; + if (data->trace_tail_idx >= ENTRIES_PER_PAGE) { + data->trace_tail = + trace_next_page(data, data->trace_tail); + data->trace_tail_idx = 0; + } + } + + data->trace_head_idx = idx_next; return entry; } @@ -571,21 +596,11 @@ trace_entry_idx(struct trace_array *tr, struct trace_array_cpu *data, return NULL; if (!iter->next_page[cpu]) { - /* - * Initialize. If the count of elements in - * this buffer is greater than the max entries - * we had an underrun. Which means we looped around. - * We can simply use the current pointer as our - * starting point. - */ - if (data->trace_idx >= tr->entries) { - page = virt_to_page(data->trace_current); - iter->next_page[cpu] = &page->lru; - iter->next_page_idx[cpu] = data->trace_current_idx; - } else { - iter->next_page[cpu] = data->trace_pages.next; - iter->next_page_idx[cpu] = 0; - } + /* Initialize the iterator for this cpu trace buffer */ + WARN_ON(!data->trace_tail); + page = virt_to_page(data->trace_tail); + iter->next_page[cpu] = &page->lru; + iter->next_page_idx[cpu] = data->trace_tail_idx; } page = list_entry(iter->next_page[cpu], struct page, lru); @@ -593,6 +608,12 @@ trace_entry_idx(struct trace_array *tr, struct trace_array_cpu *data, array = page_address(page); + /* Still possible to catch up to the tail */ + if (iter->next_idx[cpu] && array == data->trace_tail && + iter->next_page_idx[cpu] == data->trace_tail_idx) + return NULL; + + WARN_ON(iter->next_page_idx[cpu] >= ENTRIES_PER_PAGE); return &array[iter->next_page_idx[cpu]]; } @@ -638,10 +659,8 @@ static void *find_next_entry_inc(struct trace_iterator *iter) iter->next_page_idx[next_cpu] = 0; iter->next_page[next_cpu] = - iter->next_page[next_cpu]->next; - if (iter->next_page[next_cpu] == &data->trace_pages) - iter->next_page[next_cpu] = - data->trace_pages.next; + trace_next_list(data, iter->next_page[next_cpu]); + } } iter->prev_ent = iter->ent; diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 5df8ff2b84a7..0ce127455b4b 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -53,13 +53,15 @@ struct trace_entry { * the trace, etc.) */ struct trace_array_cpu { - void *trace_current; struct list_head trace_pages; atomic_t disabled; cycle_t time_offset; /* these fields get copied into max-trace: */ - unsigned trace_current_idx; + unsigned trace_head_idx; + unsigned trace_tail_idx; + void *trace_head; /* producer */ + void *trace_tail; /* consumer */ unsigned long trace_idx; unsigned long saved_latency; unsigned long critical_start; -- cgit v1.2.3 From 214023c3d13a71525e463b5e54e360b926b4dc90 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:46 +0200 Subject: ftrace: add a buffer for output Later patches will need to print the same things as the seq output does. But those outputs will not use the seq utility. This patch adds a buffer to the iterator, that can be used by either the seq utility or other output. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 202 ++++++++++++++++++++++++++++++++++----------------- kernel/trace/trace.h | 6 ++ 2 files changed, 140 insertions(+), 68 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 777b859e1c2e..d39f4faec7c3 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -169,6 +169,66 @@ void *head_page(struct trace_array_cpu *data) return page_address(page); } +static notrace int +trace_seq_printf(struct trace_seq *s, const char *fmt, ...) +{ + int len = (PAGE_SIZE - 1) - s->len; + va_list ap; + + if (!len) + return 0; + + va_start(ap, fmt); + len = vsnprintf(s->buffer + s->len, len, fmt, ap); + va_end(ap); + + s->len += len; + + return len; +} + +static notrace int +trace_seq_puts(struct trace_seq *s, const char *str) +{ + int len = strlen(str); + + if (len > ((PAGE_SIZE - 1) - s->len)) + len = (PAGE_SIZE - 1) - s->len; + + memcpy(s->buffer + s->len, str, len); + s->len += len; + + return len; +} + +static notrace int +trace_seq_putc(struct trace_seq *s, unsigned char c) +{ + if (s->len >= (PAGE_SIZE - 1)) + return 0; + + s->buffer[s->len++] = c; + + return 1; +} + +static notrace void +trace_seq_reset(struct trace_seq *s) +{ + s->len = 0; +} + +static notrace void +trace_print_seq(struct seq_file *m, struct trace_seq *s) +{ + int len = s->len >= PAGE_SIZE ? PAGE_SIZE - 1 : s->len; + + s->buffer[len] = 0; + seq_puts(m, s->buffer); + + trace_seq_reset(s); +} + notrace static void flip_trace(struct trace_array_cpu *tr1, struct trace_array_cpu *tr2) { @@ -756,25 +816,26 @@ static void s_stop(struct seq_file *m, void *p) } static void -seq_print_sym_short(struct seq_file *m, const char *fmt, unsigned long address) +seq_print_sym_short(struct trace_seq *s, const char *fmt, unsigned long address) { #ifdef CONFIG_KALLSYMS char str[KSYM_SYMBOL_LEN]; kallsyms_lookup(address, NULL, NULL, NULL, str); - seq_printf(m, fmt, str); + trace_seq_printf(s, fmt, str); #endif } static void -seq_print_sym_offset(struct seq_file *m, const char *fmt, unsigned long address) +seq_print_sym_offset(struct trace_seq *s, const char *fmt, + unsigned long address) { #ifdef CONFIG_KALLSYMS char str[KSYM_SYMBOL_LEN]; sprint_symbol(str, address); - seq_printf(m, fmt, str); + trace_seq_printf(s, fmt, str); #endif } @@ -785,20 +846,20 @@ seq_print_sym_offset(struct seq_file *m, const char *fmt, unsigned long address) #endif static notrace void -seq_print_ip_sym(struct seq_file *m, unsigned long ip, unsigned long sym_flags) +seq_print_ip_sym(struct trace_seq *s, unsigned long ip, unsigned long sym_flags) { if (!ip) { - seq_printf(m, "0"); + trace_seq_printf(s, "0"); return; } if (sym_flags & TRACE_ITER_SYM_OFFSET) - seq_print_sym_offset(m, "%s", ip); + seq_print_sym_offset(s, "%s", ip); else - seq_print_sym_short(m, "%s", ip); + seq_print_sym_short(s, "%s", ip); if (sym_flags & TRACE_ITER_SYM_ADDR) - seq_printf(m, " <" IP_FMT ">", ip); + trace_seq_printf(s, " <" IP_FMT ">", ip); } static notrace void print_lat_help_header(struct seq_file *m) @@ -881,9 +942,11 @@ print_trace_header(struct seq_file *m, struct trace_iterator *iter) if (data->critical_start) { seq_puts(m, " => started at: "); - seq_print_ip_sym(m, data->critical_start, sym_flags); + seq_print_ip_sym(&iter->seq, data->critical_start, sym_flags); + trace_print_seq(m, &iter->seq); seq_puts(m, "\n => ended at: "); - seq_print_ip_sym(m, data->critical_end, sym_flags); + seq_print_ip_sym(&iter->seq, data->critical_end, sym_flags); + trace_print_seq(m, &iter->seq); seq_puts(m, "\n"); } @@ -891,61 +954,61 @@ print_trace_header(struct seq_file *m, struct trace_iterator *iter) } static notrace void -lat_print_generic(struct seq_file *m, struct trace_entry *entry, int cpu) +lat_print_generic(struct trace_seq *s, struct trace_entry *entry, int cpu) { int hardirq, softirq; char *comm; comm = trace_find_cmdline(entry->pid); - seq_printf(m, "%8.8s-%-5d ", comm, entry->pid); - seq_printf(m, "%d", cpu); - seq_printf(m, "%c%c", - (entry->flags & TRACE_FLAG_IRQS_OFF) ? 'd' : '.', - ((entry->flags & TRACE_FLAG_NEED_RESCHED) ? 'N' : '.')); + trace_seq_printf(s, "%8.8s-%-5d ", comm, entry->pid); + trace_seq_printf(s, "%d", cpu); + trace_seq_printf(s, "%c%c", + (entry->flags & TRACE_FLAG_IRQS_OFF) ? 'd' : '.', + ((entry->flags & TRACE_FLAG_NEED_RESCHED) ? 'N' : '.')); hardirq = entry->flags & TRACE_FLAG_HARDIRQ; softirq = entry->flags & TRACE_FLAG_SOFTIRQ; if (hardirq && softirq) - seq_putc(m, 'H'); + trace_seq_putc(s, 'H'); else { if (hardirq) - seq_putc(m, 'h'); + trace_seq_putc(s, 'h'); else { if (softirq) - seq_putc(m, 's'); + trace_seq_putc(s, 's'); else - seq_putc(m, '.'); + trace_seq_putc(s, '.'); } } if (entry->preempt_count) - seq_printf(m, "%x", entry->preempt_count); + trace_seq_printf(s, "%x", entry->preempt_count); else - seq_puts(m, "."); + trace_seq_puts(s, "."); } unsigned long preempt_mark_thresh = 100; static notrace void -lat_print_timestamp(struct seq_file *m, unsigned long long abs_usecs, +lat_print_timestamp(struct trace_seq *s, unsigned long long abs_usecs, unsigned long rel_usecs) { - seq_printf(m, " %4lldus", abs_usecs); + trace_seq_printf(s, " %4lldus", abs_usecs); if (rel_usecs > preempt_mark_thresh) - seq_puts(m, "!: "); + trace_seq_puts(s, "!: "); else if (rel_usecs > 1) - seq_puts(m, "+: "); + trace_seq_puts(s, "+: "); else - seq_puts(m, " : "); + trace_seq_puts(s, " : "); } static const char state_to_char[] = TASK_STATE_TO_CHAR_STR; static notrace void -print_lat_fmt(struct seq_file *m, struct trace_iterator *iter, - unsigned int trace_idx, int cpu) +print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) { + struct trace_seq *s = &iter->seq; unsigned long sym_flags = (trace_flags & TRACE_ITER_SYM_MASK); struct trace_entry *next_entry = find_next_entry(iter, NULL); unsigned long verbose = (trace_flags & TRACE_ITER_VERBOSE); @@ -962,39 +1025,40 @@ print_lat_fmt(struct seq_file *m, struct trace_iterator *iter, if (verbose) { comm = trace_find_cmdline(entry->pid); - seq_printf(m, "%16s %5d %d %d %08x %08x [%08lx]" - " %ld.%03ldms (+%ld.%03ldms): ", - comm, - entry->pid, cpu, entry->flags, - entry->preempt_count, trace_idx, - ns2usecs(entry->t), - abs_usecs/1000, - abs_usecs % 1000, rel_usecs/1000, rel_usecs % 1000); + trace_seq_printf(s, "%16s %5d %d %d %08x %08x [%08lx]" + " %ld.%03ldms (+%ld.%03ldms): ", + comm, + entry->pid, cpu, entry->flags, + entry->preempt_count, trace_idx, + ns2usecs(entry->t), + abs_usecs/1000, + abs_usecs % 1000, rel_usecs/1000, + rel_usecs % 1000); } else { - lat_print_generic(m, entry, cpu); - lat_print_timestamp(m, abs_usecs, rel_usecs); + lat_print_generic(s, entry, cpu); + lat_print_timestamp(s, abs_usecs, rel_usecs); } switch (entry->type) { case TRACE_FN: - seq_print_ip_sym(m, entry->fn.ip, sym_flags); - seq_puts(m, " ("); - seq_print_ip_sym(m, entry->fn.parent_ip, sym_flags); - seq_puts(m, ")\n"); + seq_print_ip_sym(s, entry->fn.ip, sym_flags); + trace_seq_puts(s, " ("); + seq_print_ip_sym(s, entry->fn.parent_ip, sym_flags); + trace_seq_puts(s, ")\n"); break; case TRACE_CTX: S = entry->ctx.prev_state < sizeof(state_to_char) ? state_to_char[entry->ctx.prev_state] : 'X'; comm = trace_find_cmdline(entry->ctx.next_pid); - seq_printf(m, " %d:%d:%c --> %d:%d %s\n", - entry->ctx.prev_pid, - entry->ctx.prev_prio, - S, - entry->ctx.next_pid, - entry->ctx.next_prio, - comm); + trace_seq_printf(s, " %d:%d:%c --> %d:%d %s\n", + entry->ctx.prev_pid, + entry->ctx.prev_prio, + S, + entry->ctx.next_pid, + entry->ctx.next_prio, + comm); break; default: - seq_printf(m, "Unknown type %d\n", entry->type); + trace_seq_printf(s, "Unknown type %d\n", entry->type); } } @@ -1026,8 +1090,9 @@ static notrace void sync_time_offset(struct trace_iterator *iter) } static notrace void -print_trace_fmt(struct seq_file *m, struct trace_iterator *iter) +print_trace_fmt(struct trace_iterator *iter) { + struct trace_seq *s = &iter->seq; unsigned long sym_flags = (trace_flags & TRACE_ITER_SYM_MASK); struct trace_entry *entry; unsigned long usec_rem; @@ -1045,29 +1110,29 @@ print_trace_fmt(struct seq_file *m, struct trace_iterator *iter) usec_rem = do_div(t, 1000000ULL); secs = (unsigned long)t; - seq_printf(m, "%16s-%-5d ", comm, entry->pid); - seq_printf(m, "[%02d] ", iter->cpu); - seq_printf(m, "%5lu.%06lu: ", secs, usec_rem); + trace_seq_printf(s, "%16s-%-5d ", comm, entry->pid); + trace_seq_printf(s, "[%02d] ", iter->cpu); + trace_seq_printf(s, "%5lu.%06lu: ", secs, usec_rem); switch (entry->type) { case TRACE_FN: - seq_print_ip_sym(m, entry->fn.ip, sym_flags); + seq_print_ip_sym(s, entry->fn.ip, sym_flags); if ((sym_flags & TRACE_ITER_PRINT_PARENT) && entry->fn.parent_ip) { - seq_printf(m, " <-"); - seq_print_ip_sym(m, entry->fn.parent_ip, sym_flags); + trace_seq_printf(s, " <-"); + seq_print_ip_sym(s, entry->fn.parent_ip, sym_flags); } - seq_printf(m, "\n"); + trace_seq_printf(s, "\n"); break; case TRACE_CTX: S = entry->ctx.prev_state < sizeof(state_to_char) ? state_to_char[entry->ctx.prev_state] : 'X'; - seq_printf(m, " %d:%d:%c ==> %d:%d\n", - entry->ctx.prev_pid, - entry->ctx.prev_prio, - S, - entry->ctx.next_pid, - entry->ctx.next_prio); + trace_seq_printf(s, " %d:%d:%c ==> %d:%d\n", + entry->ctx.prev_pid, + entry->ctx.prev_prio, + S, + entry->ctx.next_pid, + entry->ctx.next_prio); break; } } @@ -1108,9 +1173,10 @@ static int s_show(struct seq_file *m, void *v) } } else { if (iter->iter_flags & TRACE_FILE_LAT_FMT) - print_lat_fmt(m, iter, iter->idx, iter->cpu); + print_lat_fmt(iter, iter->idx, iter->cpu); else - print_trace_fmt(m, iter); + print_trace_fmt(iter); + trace_print_seq(m, &iter->seq); } return 0; diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 0ce127455b4b..f5b32ca0b457 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -111,11 +111,17 @@ struct tracer { int print_max; }; +struct trace_seq { + unsigned char buffer[PAGE_SIZE]; + unsigned int len; +}; + /* * Trace iterator - used by printout routines who present trace * results to users and which routines might sleep, etc: */ struct trace_iterator { + struct trace_seq seq; struct trace_array *tr; struct tracer *trace; -- cgit v1.2.3 From b3806b4316306dc9c542eff6c23d7d42918f3504 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:46 +0200 Subject: ftrace: user run time file reading This patch creates a file called trace_pipe in the tracing debug directory. This file is a consumer of the trace buffers. This means that reads of this file consumes the entries from the trace buffers so that they will not be read a second time, as contrast to the static buffers latency_trace and trace. Reading from the trace_pipe will remove the entries from trace and latency_trace too. The advantage that trace_pipe has is that it can record live traces. It will block when there is nothing in the buffer, and read the entries as they are entered. An EOF happens when tracing is disabled (tracing_enabled = 0). Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 353 ++++++++++++++++++++++++++++++++++++++++++++------- kernel/trace/trace.h | 2 + 2 files changed, 309 insertions(+), 46 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index d39f4faec7c3..a40687a4413a 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -174,15 +174,20 @@ trace_seq_printf(struct trace_seq *s, const char *fmt, ...) { int len = (PAGE_SIZE - 1) - s->len; va_list ap; + int ret; if (!len) return 0; va_start(ap, fmt); - len = vsnprintf(s->buffer + s->len, len, fmt, ap); + ret = vsnprintf(s->buffer + s->len, len, fmt, ap); va_end(ap); - s->len += len; + /* If we can't write it all, don't bother writing anything */ + if (ret > len) + return 0; + + s->len += ret; return len; } @@ -193,7 +198,7 @@ trace_seq_puts(struct trace_seq *s, const char *str) int len = strlen(str); if (len > ((PAGE_SIZE - 1) - s->len)) - len = (PAGE_SIZE - 1) - s->len; + return 0; memcpy(s->buffer + s->len, str, len); s->len += len; @@ -615,11 +620,13 @@ ftrace(struct trace_array *tr, struct trace_array_cpu *data, { struct trace_entry *entry; + spin_lock(&data->lock); entry = tracing_get_trace_entry(tr, data); tracing_generic_entry_update(entry, flags); entry->type = TRACE_FN; entry->fn.ip = ip; entry->fn.parent_ip = parent_ip; + spin_unlock(&data->lock); } notrace void @@ -630,6 +637,7 @@ tracing_sched_switch_trace(struct trace_array *tr, { struct trace_entry *entry; + spin_lock(&data->lock); entry = tracing_get_trace_entry(tr, data); tracing_generic_entry_update(entry, flags); entry->type = TRACE_CTX; @@ -638,6 +646,7 @@ tracing_sched_switch_trace(struct trace_array *tr, entry->ctx.prev_state = prev->state; entry->ctx.next_pid = next->pid; entry->ctx.next_prio = next->prio; + spin_unlock(&data->lock); } enum trace_file_type { @@ -652,7 +661,9 @@ trace_entry_idx(struct trace_array *tr, struct trace_array_cpu *data, struct trace_entry *array; if (iter->next_idx[cpu] >= tr->entries || - iter->next_idx[cpu] >= data->trace_idx) + iter->next_idx[cpu] >= data->trace_idx || + (data->trace_head == data->trace_tail && + data->trace_head_idx == data->trace_tail_idx)) return NULL; if (!iter->next_page[cpu]) { @@ -702,33 +713,57 @@ find_next_entry(struct trace_iterator *iter, int *ent_cpu) return next; } -static void *find_next_entry_inc(struct trace_iterator *iter) +static notrace void +trace_iterator_increment(struct trace_iterator *iter) { - struct trace_entry *next; - int next_cpu = -1; + iter->idx++; + iter->next_idx[iter->cpu]++; + iter->next_page_idx[iter->cpu]++; + if (iter->next_page_idx[iter->cpu] >= ENTRIES_PER_PAGE) { + struct trace_array_cpu *data = iter->tr->data[iter->cpu]; - next = find_next_entry(iter, &next_cpu); + iter->next_page_idx[iter->cpu] = 0; + iter->next_page[iter->cpu] = + trace_next_list(data, iter->next_page[iter->cpu]); + } +} - if (next) { - iter->idx++; - iter->next_idx[next_cpu]++; - iter->next_page_idx[next_cpu]++; +static notrace void +trace_consume(struct trace_iterator *iter) +{ + struct trace_array_cpu *data = iter->tr->data[iter->cpu]; + + data->trace_tail_idx++; + if (data->trace_tail_idx >= ENTRIES_PER_PAGE) { + data->trace_tail = trace_next_page(data, data->trace_tail); + data->trace_tail_idx = 0; + } - if (iter->next_page_idx[next_cpu] >= ENTRIES_PER_PAGE) { - struct trace_array_cpu *data = iter->tr->data[next_cpu]; + /* Check if we empty it, then reset the index */ + if (data->trace_head == data->trace_tail && + data->trace_head_idx == data->trace_tail_idx) + data->trace_idx = 0; - iter->next_page_idx[next_cpu] = 0; - iter->next_page[next_cpu] = - trace_next_list(data, iter->next_page[next_cpu]); + trace_iterator_increment(iter); +} + +static notrace void * +find_next_entry_inc(struct trace_iterator *iter) +{ + struct trace_entry *next; + int next_cpu = -1; + + next = find_next_entry(iter, &next_cpu); - } - } iter->prev_ent = iter->ent; iter->prev_cpu = iter->cpu; iter->ent = next; iter->cpu = next_cpu; + if (next) + trace_iterator_increment(iter); + return next ? iter : NULL; } @@ -815,7 +850,7 @@ static void s_stop(struct seq_file *m, void *p) mutex_unlock(&trace_types_lock); } -static void +static int seq_print_sym_short(struct trace_seq *s, const char *fmt, unsigned long address) { #ifdef CONFIG_KALLSYMS @@ -823,11 +858,12 @@ seq_print_sym_short(struct trace_seq *s, const char *fmt, unsigned long address) kallsyms_lookup(address, NULL, NULL, NULL, str); - trace_seq_printf(s, fmt, str); + return trace_seq_printf(s, fmt, str); #endif + return 1; } -static void +static int seq_print_sym_offset(struct trace_seq *s, const char *fmt, unsigned long address) { @@ -835,8 +871,9 @@ seq_print_sym_offset(struct trace_seq *s, const char *fmt, char str[KSYM_SYMBOL_LEN]; sprint_symbol(str, address); - trace_seq_printf(s, fmt, str); + return trace_seq_printf(s, fmt, str); #endif + return 1; } #ifndef CONFIG_64BIT @@ -845,21 +882,25 @@ seq_print_sym_offset(struct trace_seq *s, const char *fmt, # define IP_FMT "%016lx" #endif -static notrace void +static notrace int seq_print_ip_sym(struct trace_seq *s, unsigned long ip, unsigned long sym_flags) { - if (!ip) { - trace_seq_printf(s, "0"); - return; - } + int ret; + + if (!ip) + return trace_seq_printf(s, "0"); if (sym_flags & TRACE_ITER_SYM_OFFSET) - seq_print_sym_offset(s, "%s", ip); + ret = seq_print_sym_offset(s, "%s", ip); else - seq_print_sym_short(s, "%s", ip); + ret = seq_print_sym_short(s, "%s", ip); + + if (!ret) + return 0; if (sym_flags & TRACE_ITER_SYM_ADDR) - trace_seq_printf(s, " <" IP_FMT ">", ip); + ret = trace_seq_printf(s, " <" IP_FMT ">", ip); + return ret; } static notrace void print_lat_help_header(struct seq_file *m) @@ -1089,7 +1130,7 @@ static notrace void sync_time_offset(struct trace_iterator *iter) array->time_offset += prev_t - t; } -static notrace void +static notrace int print_trace_fmt(struct trace_iterator *iter) { struct trace_seq *s = &iter->seq; @@ -1100,6 +1141,7 @@ print_trace_fmt(struct trace_iterator *iter) unsigned long secs; char *comm; int S; + int ret; sync_time_offset(iter); entry = iter->ent; @@ -1110,31 +1152,49 @@ print_trace_fmt(struct trace_iterator *iter) usec_rem = do_div(t, 1000000ULL); secs = (unsigned long)t; - trace_seq_printf(s, "%16s-%-5d ", comm, entry->pid); - trace_seq_printf(s, "[%02d] ", iter->cpu); - trace_seq_printf(s, "%5lu.%06lu: ", secs, usec_rem); + ret = trace_seq_printf(s, "%16s-%-5d ", comm, entry->pid); + if (!ret) + return 0; + ret = trace_seq_printf(s, "[%02d] ", iter->cpu); + if (!ret) + return 0; + ret = trace_seq_printf(s, "%5lu.%06lu: ", secs, usec_rem); + if (!ret) + return 0; switch (entry->type) { case TRACE_FN: - seq_print_ip_sym(s, entry->fn.ip, sym_flags); + ret = seq_print_ip_sym(s, entry->fn.ip, sym_flags); + if (!ret) + return 0; if ((sym_flags & TRACE_ITER_PRINT_PARENT) && entry->fn.parent_ip) { - trace_seq_printf(s, " <-"); - seq_print_ip_sym(s, entry->fn.parent_ip, sym_flags); + ret = trace_seq_printf(s, " <-"); + if (!ret) + return 0; + ret = seq_print_ip_sym(s, entry->fn.parent_ip, + sym_flags); + if (!ret) + return 0; } - trace_seq_printf(s, "\n"); + ret = trace_seq_printf(s, "\n"); + if (!ret) + return 0; break; case TRACE_CTX: S = entry->ctx.prev_state < sizeof(state_to_char) ? state_to_char[entry->ctx.prev_state] : 'X'; - trace_seq_printf(s, " %d:%d:%c ==> %d:%d\n", - entry->ctx.prev_pid, - entry->ctx.prev_prio, - S, - entry->ctx.next_pid, - entry->ctx.next_prio); + ret = trace_seq_printf(s, " %d:%d:%c ==> %d:%d\n", + entry->ctx.prev_pid, + entry->ctx.prev_prio, + S, + entry->ctx.next_pid, + entry->ctx.next_prio); + if (!ret) + return 0; break; } + return 1; } static int trace_empty(struct trace_iterator *iter) @@ -1145,7 +1205,9 @@ static int trace_empty(struct trace_iterator *iter) for_each_possible_cpu(cpu) { data = iter->tr->data[cpu]; - if (head_page(data) && data->trace_idx) + if (head_page(data) && data->trace_idx && + (data->trace_tail != data->trace_head || + data->trace_tail_idx != data->trace_head_idx)) return 0; } return 1; @@ -1645,6 +1707,192 @@ tracing_max_lat_write(struct file *filp, const char __user *ubuf, return cnt; } +static atomic_t tracing_reader; + +static int tracing_open_pipe(struct inode *inode, struct file *filp) +{ + struct trace_iterator *iter; + + if (tracing_disabled) + return -ENODEV; + + /* We only allow for reader of the pipe */ + if (atomic_inc_return(&tracing_reader) != 1) { + atomic_dec(&tracing_reader); + return -EBUSY; + } + + /* create a buffer to store the information to pass to userspace */ + iter = kzalloc(sizeof(*iter), GFP_KERNEL); + if (!iter) + return -ENOMEM; + + iter->tr = &global_trace; + + filp->private_data = iter; + + return 0; +} + +static int tracing_release_pipe(struct inode *inode, struct file *file) +{ + struct trace_iterator *iter = file->private_data; + + kfree(iter); + atomic_dec(&tracing_reader); + + return 0; +} + +/* + * Consumer reader. + */ +static ssize_t +tracing_read_pipe(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + struct trace_iterator *iter = filp->private_data; + struct trace_array_cpu *data; + static cpumask_t mask; + struct trace_entry *entry; + static int start; + unsigned long flags; + int read = 0; + int cpu; + int len; + int ret; + + /* return any leftover data */ + if (iter->seq.len > start) { + len = iter->seq.len - start; + if (cnt > len) + cnt = len; + ret = copy_to_user(ubuf, iter->seq.buffer + start, cnt); + if (ret) + cnt = -EFAULT; + + start += len; + + return cnt; + } + + trace_seq_reset(&iter->seq); + start = 0; + + while (trace_empty(iter)) { + /* + * This is a make-shift waitqueue. The reason we don't use + * an actual wait queue is because: + * 1) we only ever have one waiter + * 2) the tracing, traces all functions, we don't want + * the overhead of calling wake_up and friends + * (and tracing them too) + * Anyway, this is really very primitive wakeup. + */ + set_current_state(TASK_INTERRUPTIBLE); + iter->tr->waiter = current; + + /* sleep for one second, and try again. */ + schedule_timeout(HZ); + + iter->tr->waiter = NULL; + + if (signal_pending(current)) + return -EINTR; + + /* + * We block until we read something and tracing is disabled. + * We still block if tracing is disabled, but we have never + * read anything. This allows a user to cat this file, and + * then enable tracing. But after we have read something, + * we give an EOF when tracing is again disabled. + * + * iter->pos will be 0 if we haven't read anything. + */ + if (!tracer_enabled && iter->pos) + break; + + continue; + } + + /* stop when tracing is finished */ + if (trace_empty(iter)) + return 0; + + if (cnt >= PAGE_SIZE) + cnt = PAGE_SIZE - 1; + + memset(iter, 0, sizeof(*iter)); + iter->tr = &global_trace; + iter->pos = -1; + + /* + * We need to stop all tracing on all CPUS to read the + * the next buffer. This is a bit expensive, but is + * not done often. We fill all what we can read, + * and then release the locks again. + */ + + cpus_clear(mask); + local_irq_save(flags); + for_each_possible_cpu(cpu) { + data = iter->tr->data[cpu]; + + if (!head_page(data) || !data->trace_idx) + continue; + + atomic_inc(&data->disabled); + spin_lock(&data->lock); + cpu_set(cpu, mask); + } + + while ((entry = find_next_entry(iter, &cpu))) { + + if (!entry) + break; + + iter->ent = entry; + iter->cpu = cpu; + + ret = print_trace_fmt(iter); + if (!ret) + break; + + trace_consume(iter); + + if (iter->seq.len >= cnt) + break; + + } + + for_each_possible_cpu(cpu) { + data = iter->tr->data[cpu]; + + if (!cpu_isset(cpu, mask)) + continue; + spin_unlock(&data->lock); + atomic_dec(&data->disabled); + } + local_irq_restore(flags); + + /* Now copy what we have to the user */ + read = iter->seq.len; + if (read > cnt) + read = cnt; + + ret = copy_to_user(ubuf, iter->seq.buffer, read); + + if (read < iter->seq.len) + start = read; + else + trace_seq_reset(&iter->seq); + + if (ret) + read = -EFAULT; + + return read; +} + static struct file_operations tracing_max_lat_fops = { .open = tracing_open_generic, .read = tracing_max_lat_read, @@ -1663,6 +1911,12 @@ static struct file_operations set_tracer_fops = { .write = tracing_set_trace_write, }; +static struct file_operations tracing_pipe_fops = { + .open = tracing_open_pipe, + .read = tracing_read_pipe, + .release = tracing_release_pipe, +}; + #ifdef CONFIG_DYNAMIC_FTRACE static ssize_t @@ -1763,6 +2017,11 @@ static __init void tracer_init_debugfs(void) if (!entry) pr_warning("Could not create debugfs 'README' entry\n"); + entry = debugfs_create_file("trace_pipe", 0644, d_tracer, + NULL, &tracing_pipe_fops); + if (!entry) + pr_warning("Could not create debugfs " + "'tracing_threash' entry\n"); #ifdef CONFIG_DYNAMIC_FTRACE entry = debugfs_create_file("dyn_ftrace_total_info", 0444, d_tracer, @@ -1816,6 +2075,7 @@ static int trace_alloc_page(void) /* Now that we successfully allocate a page per CPU, add them */ for_each_possible_cpu(i) { data = global_trace.data[i]; + spin_lock_init(&data->lock); page = list_entry(pages.next, struct page, lru); list_del_init(&page->lru); list_add_tail(&page->lru, &data->trace_pages); @@ -1823,6 +2083,7 @@ static int trace_alloc_page(void) #ifdef CONFIG_TRACER_MAX_TRACE data = max_tr.data[i]; + spin_lock_init(&data->lock); page = list_entry(pages.next, struct page, lru); list_del_init(&page->lru); list_add_tail(&page->lru, &data->trace_pages); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index f5b32ca0b457..29a7ea59de50 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -55,6 +55,7 @@ struct trace_entry { struct trace_array_cpu { struct list_head trace_pages; atomic_t disabled; + spinlock_t lock; cycle_t time_offset; /* these fields get copied into max-trace: */ @@ -88,6 +89,7 @@ struct trace_array { long ctrl; int cpu; cycle_t time_start; + struct task_struct *waiter; struct trace_array_cpu *data[NR_CPUS]; }; -- cgit v1.2.3 From d4c5a2f5870939d837293de87b41dda0012a4572 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:46 +0200 Subject: ftrace: fix locking we can hold all cpu trace buffer locks at once - put each into a separate lock class. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 8 +++----- kernel/trace/trace.h | 1 + 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index a40687a4413a..b3811ca74071 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1865,11 +1865,8 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, } - for_each_possible_cpu(cpu) { + for_each_cpu_mask(cpu, mask) { data = iter->tr->data[cpu]; - - if (!cpu_isset(cpu, mask)) - continue; spin_unlock(&data->lock); atomic_dec(&data->disabled); } @@ -2076,6 +2073,7 @@ static int trace_alloc_page(void) for_each_possible_cpu(i) { data = global_trace.data[i]; spin_lock_init(&data->lock); + lockdep_set_class(&data->lock, &data->lock_key); page = list_entry(pages.next, struct page, lru); list_del_init(&page->lru); list_add_tail(&page->lru, &data->trace_pages); @@ -2084,6 +2082,7 @@ static int trace_alloc_page(void) #ifdef CONFIG_TRACER_MAX_TRACE data = max_tr.data[i]; spin_lock_init(&data->lock); + lockdep_set_class(&data->lock, &data->lock_key); page = list_entry(pages.next, struct page, lru); list_del_init(&page->lru); list_add_tail(&page->lru, &data->trace_pages); @@ -2203,5 +2202,4 @@ __init static int tracer_alloc_buffers(void) } return ret; } - fs_initcall(tracer_alloc_buffers); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 29a7ea59de50..b0408356f0e0 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -56,6 +56,7 @@ struct trace_array_cpu { struct list_head trace_pages; atomic_t disabled; spinlock_t lock; + struct lock_class_key lock_key; cycle_t time_offset; /* these fields get copied into max-trace: */ -- cgit v1.2.3 From 4bf39a9411a4ce8712954e03a9bd1592ee345919 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:46 +0200 Subject: ftrace: cleanups no code changed. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/ftrace.c | 5 +++- kernel/trace/trace.c | 72 +++++++++++++++++++++++++-------------------------- 2 files changed, 39 insertions(+), 38 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 5e9389faaf75..97c40865a93e 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -756,9 +756,11 @@ ftrace_avail_open(struct inode *inode, struct file *file) ret = seq_open(file, &show_ftrace_seq_ops); if (!ret) { struct seq_file *m = file->private_data; + m->private = iter; - } else + } else { kfree(iter); + } return ret; } @@ -770,6 +772,7 @@ int ftrace_avail_release(struct inode *inode, struct file *file) seq_release(inode, file); kfree(iter); + return 0; } diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b3811ca74071..4550afda9607 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1245,10 +1245,10 @@ static int s_show(struct seq_file *m, void *v) } static struct seq_operations tracer_seq_ops = { - .start = s_start, - .next = s_next, - .stop = s_stop, - .show = s_show, + .start = s_start, + .next = s_next, + .stop = s_stop, + .show = s_show, }; static struct trace_iterator notrace * @@ -1397,10 +1397,10 @@ static int t_show(struct seq_file *m, void *v) } static struct seq_operations show_traces_seq_ops = { - .start = t_start, - .next = t_next, - .stop = t_stop, - .show = t_show, + .start = t_start, + .next = t_next, + .stop = t_stop, + .show = t_show, }; static int show_traces_open(struct inode *inode, struct file *file) @@ -1420,17 +1420,17 @@ static int show_traces_open(struct inode *inode, struct file *file) } static struct file_operations tracing_fops = { - .open = tracing_open, - .read = seq_read, - .llseek = seq_lseek, - .release = tracing_release, + .open = tracing_open, + .read = seq_read, + .llseek = seq_lseek, + .release = tracing_release, }; static struct file_operations tracing_lt_fops = { - .open = tracing_lt_open, - .read = seq_read, - .llseek = seq_lseek, - .release = tracing_release, + .open = tracing_lt_open, + .read = seq_read, + .llseek = seq_lseek, + .release = tracing_release, }; static struct file_operations show_traces_fops = { @@ -1620,8 +1620,7 @@ tracing_set_trace_read(struct file *filp, char __user *ubuf, r = sprintf(buf, "\n"); mutex_unlock(&trace_types_lock); - return simple_read_from_buffer(ubuf, cnt, ppos, - buf, r); + return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); } static ssize_t @@ -1680,8 +1679,7 @@ tracing_max_lat_read(struct file *filp, char __user *ubuf, *ptr == (unsigned long)-1 ? -1 : nsecs_to_usecs(*ptr)); if (r > 64) r = 64; - return simple_read_from_buffer(ubuf, cnt, ppos, - buf, r); + return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); } static ssize_t @@ -1891,27 +1889,27 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, } static struct file_operations tracing_max_lat_fops = { - .open = tracing_open_generic, - .read = tracing_max_lat_read, - .write = tracing_max_lat_write, + .open = tracing_open_generic, + .read = tracing_max_lat_read, + .write = tracing_max_lat_write, }; static struct file_operations tracing_ctrl_fops = { - .open = tracing_open_generic, - .read = tracing_ctrl_read, - .write = tracing_ctrl_write, + .open = tracing_open_generic, + .read = tracing_ctrl_read, + .write = tracing_ctrl_write, }; static struct file_operations set_tracer_fops = { - .open = tracing_open_generic, - .read = tracing_set_trace_read, - .write = tracing_set_trace_write, + .open = tracing_open_generic, + .read = tracing_set_trace_read, + .write = tracing_set_trace_write, }; static struct file_operations tracing_pipe_fops = { - .open = tracing_open_pipe, - .read = tracing_read_pipe, - .release = tracing_release_pipe, + .open = tracing_open_pipe, + .read = tracing_read_pipe, + .release = tracing_release_pipe, }; #ifdef CONFIG_DYNAMIC_FTRACE @@ -1925,13 +1923,13 @@ tracing_read_long(struct file *filp, char __user *ubuf, int r; r = sprintf(buf, "%ld\n", *p); - return simple_read_from_buffer(ubuf, cnt, ppos, - buf, r); + + return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); } static struct file_operations tracing_read_long_fops = { - .open = tracing_open_generic, - .read = tracing_read_long, + .open = tracing_open_generic, + .read = tracing_read_long, }; #endif @@ -2033,7 +2031,7 @@ static __init void tracer_init_debugfs(void) /* dummy trace to disable tracing */ static struct tracer no_tracer __read_mostly = { - .name = "none", + .name = "none", }; static int trace_alloc_page(void) -- cgit v1.2.3 From 750ed1a40783432d0dcb0e6c2e813a12615d7664 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:46 +0200 Subject: ftrace: timestamp syncing, prepare rename and uninline now() to ftrace_now(). Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/ftrace.c | 4 ++-- kernel/trace/trace.c | 7 ++++++- kernel/trace/trace.h | 5 +---- kernel/trace/trace_functions.c | 2 +- kernel/trace/trace_irqsoff.c | 6 +++--- kernel/trace/trace_sched_switch.c | 2 +- kernel/trace/trace_sched_wakeup.c | 4 ++-- 7 files changed, 16 insertions(+), 14 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 97c40865a93e..a15e068535f8 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -531,7 +531,7 @@ static int notrace __ftrace_update_code(void *ignore) save_ftrace_enabled = ftrace_enabled; ftrace_enabled = 0; - start = now(raw_smp_processor_id()); + start = ftrace_now(raw_smp_processor_id()); ftrace_update_cnt = 0; /* No locks needed, the machine is stopped! */ @@ -550,7 +550,7 @@ static int notrace __ftrace_update_code(void *ignore) } - stop = now(raw_smp_processor_id()); + stop = ftrace_now(raw_smp_processor_id()); ftrace_update_time = stop - start; ftrace_update_tot_cnt += ftrace_update_cnt; diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 4550afda9607..e3778ab0d3f7 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -42,6 +42,11 @@ ns2usecs(cycle_t nsec) return nsec; } +notrace cycle_t ftrace_now(int cpu) +{ + return cpu_clock(cpu); +} + static atomic_t tracer_counter; static struct trace_array global_trace; @@ -607,7 +612,7 @@ tracing_generic_entry_update(struct trace_entry *entry, unsigned long flags) entry->idx = atomic_inc_return(&tracer_counter); entry->preempt_count = pc & 0xff; entry->pid = tsk->pid; - entry->t = now(raw_smp_processor_id()); + entry->t = ftrace_now(raw_smp_processor_id()); entry->flags = (irqs_disabled_flags(flags) ? TRACE_FLAG_IRQS_OFF : 0) | ((pc & HARDIRQ_MASK) ? TRACE_FLAG_HARDIRQ : 0) | ((pc & SOFTIRQ_MASK) ? TRACE_FLAG_SOFTIRQ : 0) | diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index b0408356f0e0..30cad677e9d0 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -171,10 +171,7 @@ void update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu); void update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu); -static inline notrace cycle_t now(int cpu) -{ - return cpu_clock(cpu); -} +extern notrace cycle_t ftrace_now(int cpu); #ifdef CONFIG_SCHED_TRACER extern void notrace diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c index 5d8ad7a09605..e5d34b78fc99 100644 --- a/kernel/trace/trace_functions.c +++ b/kernel/trace/trace_functions.c @@ -20,7 +20,7 @@ static notrace void function_reset(struct trace_array *tr) { int cpu; - tr->time_start = now(tr->cpu); + tr->time_start = ftrace_now(tr->cpu); for_each_online_cpu(cpu) tracing_reset(tr->data[cpu]); diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index 2dfebb67fdfb..d2a6e6f1ad2d 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -136,7 +136,7 @@ check_critical_timing(struct trace_array *tr, * as long as possible: */ T0 = data->preempt_timestamp; - T1 = now(cpu); + T1 = ftrace_now(cpu); delta = T1-T0; local_save_flags(flags); @@ -186,7 +186,7 @@ out_unlock: out: data->critical_sequence = max_sequence; - data->preempt_timestamp = now(cpu); + data->preempt_timestamp = ftrace_now(cpu); tracing_reset(data); ftrace(tr, data, CALLER_ADDR0, parent_ip, flags); } @@ -215,7 +215,7 @@ start_critical_timing(unsigned long ip, unsigned long parent_ip) atomic_inc(&data->disabled); data->critical_sequence = max_sequence; - data->preempt_timestamp = now(cpu); + data->preempt_timestamp = ftrace_now(cpu); data->critical_start = parent_ip ? : ip; tracing_reset(data); diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index 6c9284103a62..8d656672da93 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -61,7 +61,7 @@ static notrace void sched_switch_reset(struct trace_array *tr) { int cpu; - tr->time_start = now(tr->cpu); + tr->time_start = ftrace_now(tr->cpu); for_each_online_cpu(cpu) tracing_reset(tr->data[cpu]); diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 688df965f3f2..b7df825c3af9 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -92,7 +92,7 @@ wakeup_sched_switch(struct task_struct *prev, struct task_struct *next) * as long as possible: */ T0 = data->preempt_timestamp; - T1 = now(cpu); + T1 = ftrace_now(cpu); delta = T1-T0; if (!report_latency(delta)) @@ -191,7 +191,7 @@ wakeup_check_start(struct trace_array *tr, struct task_struct *p, local_save_flags(flags); - tr->data[wakeup_cpu]->preempt_timestamp = now(cpu); + tr->data[wakeup_cpu]->preempt_timestamp = ftrace_now(cpu); ftrace(tr, tr->data[wakeup_cpu], CALLER_ADDR1, CALLER_ADDR2, flags); out_locked: -- cgit v1.2.3 From 53c37c17aafcf50f7c6fddaf01dda8f9d7e31ddf Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:46 +0200 Subject: ftrace: fast, scalable, synchronized timestamps implement globally synchronized, fast and scalable time source for tracing. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index e3778ab0d3f7..9a931c7c2da3 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -42,9 +42,61 @@ ns2usecs(cycle_t nsec) return nsec; } +static const int time_sync_freq_max = 128; +static const cycle_t time_sync_thresh = 100000; + +static DEFINE_PER_CPU(cycle_t, time_offset); +static DEFINE_PER_CPU(cycle_t, prev_cpu_time); +static DEFINE_PER_CPU(int, time_sync_count); +static DEFINE_PER_CPU(int, time_sync_freq); + +/* + * Global lock which we take every now and then to synchronize + * the CPUs time. This method is not warp-safe, but it's good + * enough to synchronize slowly diverging time sources and thus + * it's good enough for tracing: + */ +static DEFINE_SPINLOCK(time_sync_lock); +static cycle_t prev_global_time; + +static notrace cycle_t __ftrace_now_sync(cycles_t time, int cpu) +{ + unsigned long flags; + + spin_lock_irqsave(&time_sync_lock, flags); + + /* + * Update the synchronization frequency: + */ + if (per_cpu(time_sync_freq, cpu) < time_sync_freq_max) + per_cpu(time_sync_freq, cpu) *= 2; + per_cpu(time_sync_count, cpu) = per_cpu(time_sync_freq, cpu); + + if (time < prev_global_time) { + per_cpu(time_offset, cpu) += prev_global_time - time; + time = prev_global_time; + } else { + prev_global_time = time; + } + + spin_unlock_irqrestore(&time_sync_lock, flags); + + return time; +} + notrace cycle_t ftrace_now(int cpu) { - return cpu_clock(cpu); + cycle_t prev_cpu_time, time, delta_time; + + prev_cpu_time = per_cpu(prev_cpu_time, cpu); + time = sched_clock() + per_cpu(time_offset, cpu); + delta_time = time-prev_cpu_time; + + if (unlikely(delta_time > time_sync_thresh || + --per_cpu(time_sync_count, cpu) <= 0)) + time = __ftrace_now_sync(time, cpu); + + return time; } static atomic_t tracer_counter; -- cgit v1.2.3 From cdd31cd2d7a0dcbec2cce3974f7129dd4fc8c879 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:46 +0200 Subject: ftrace: remove-idx-sync remove idx syncing - it's expensive on SMP. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 40 +++++----------------------------------- kernel/trace/trace.h | 2 -- 2 files changed, 5 insertions(+), 37 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 9a931c7c2da3..ce8ceb8aea6a 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -99,7 +99,6 @@ notrace cycle_t ftrace_now(int cpu) return time; } -static atomic_t tracer_counter; static struct trace_array global_trace; static DEFINE_PER_CPU(struct trace_array_cpu, global_trace_cpu); @@ -661,7 +660,6 @@ tracing_generic_entry_update(struct trace_entry *entry, unsigned long flags) pc = preempt_count(); - entry->idx = atomic_inc_return(&tracer_counter); entry->preempt_count = pc & 0xff; entry->pid = tsk->pid; entry->t = ftrace_now(raw_smp_processor_id()); @@ -757,8 +755,10 @@ find_next_entry(struct trace_iterator *iter, int *ent_cpu) if (!head_page(tr->data[cpu])) continue; ent = trace_entry_idx(tr, tr->data[cpu], iter, cpu); - if (ent && - (!next || (long)(next->idx - ent->idx) > 0)) { + /* + * Pick the entry with the smallest timestamp: + */ + if (ent && (!next || ent->t < next->t)) { next = ent; next_cpu = cpu; } @@ -800,8 +800,6 @@ trace_consume(struct trace_iterator *iter) if (data->trace_head == data->trace_tail && data->trace_head_idx == data->trace_tail_idx) data->trace_idx = 0; - - trace_iterator_increment(iter); } static notrace void * @@ -1160,33 +1158,6 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) } } -static notrace void sync_time_offset(struct trace_iterator *iter) -{ - struct trace_array_cpu *prev_array, *array; - struct trace_entry *prev_entry, *entry; - cycle_t prev_t, t; - - entry = iter->ent; - prev_entry = iter->prev_ent; - if (!prev_entry) - return; - - prev_array = iter->tr->data[iter->prev_cpu]; - array = iter->tr->data[iter->cpu]; - - prev_t = prev_entry->t + prev_array->time_offset; - t = entry->t + array->time_offset; - - /* - * If time goes backwards we increase the offset of - * the current array, to not have observable time warps. - * This will quickly synchronize the time offsets of - * multiple CPUs: - */ - if (t < prev_t) - array->time_offset += prev_t - t; -} - static notrace int print_trace_fmt(struct trace_iterator *iter) { @@ -1200,12 +1171,11 @@ print_trace_fmt(struct trace_iterator *iter) int S; int ret; - sync_time_offset(iter); entry = iter->ent; comm = trace_find_cmdline(iter->ent->pid); - t = ns2usecs(entry->t + iter->tr->data[iter->cpu]->time_offset); + t = ns2usecs(entry->t); usec_rem = do_div(t, 1000000ULL); secs = (unsigned long)t; diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 30cad677e9d0..27fa2d06f499 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -38,7 +38,6 @@ struct trace_entry { char preempt_count; int pid; cycle_t t; - unsigned long idx; union { struct ftrace_entry fn; struct ctx_switch_entry ctx; @@ -57,7 +56,6 @@ struct trace_array_cpu { atomic_t disabled; spinlock_t lock; struct lock_class_key lock_key; - cycle_t time_offset; /* these fields get copied into max-trace: */ unsigned trace_head_idx; -- cgit v1.2.3 From 8c523a9d82dbc4f3f7d972df8c0f1eacd83d0d55 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:46 +0200 Subject: ftrace: clean-up-pipe-iteration Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ce8ceb8aea6a..42f1926acf73 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -770,12 +770,12 @@ find_next_entry(struct trace_iterator *iter, int *ent_cpu) return next; } -static notrace void -trace_iterator_increment(struct trace_iterator *iter) +static notrace void trace_iterator_increment(struct trace_iterator *iter) { iter->idx++; iter->next_idx[iter->cpu]++; iter->next_page_idx[iter->cpu]++; + if (iter->next_page_idx[iter->cpu] >= ENTRIES_PER_PAGE) { struct trace_array_cpu *data = iter->tr->data[iter->cpu]; @@ -785,8 +785,7 @@ trace_iterator_increment(struct trace_iterator *iter) } } -static notrace void -trace_consume(struct trace_iterator *iter) +static notrace void trace_consume(struct trace_iterator *iter) { struct trace_array_cpu *data = iter->tr->data[iter->cpu]; @@ -802,8 +801,7 @@ trace_consume(struct trace_iterator *iter) data->trace_idx = 0; } -static notrace void * -find_next_entry_inc(struct trace_iterator *iter) +static notrace void *find_next_entry_inc(struct trace_iterator *iter) { struct trace_entry *next; int next_cpu = -1; @@ -1871,14 +1869,7 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, cpu_set(cpu, mask); } - while ((entry = find_next_entry(iter, &cpu))) { - - if (!entry) - break; - - iter->ent = entry; - iter->cpu = cpu; - + while ((entry = find_next_entry_inc(iter)) != NULL) { ret = print_trace_fmt(iter); if (!ret) break; @@ -1887,7 +1878,6 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, if (iter->seq.len >= cnt) break; - } for_each_cpu_mask(cpu, mask) { -- cgit v1.2.3 From f9896bf30928922a3913a3810a4ab7908da6cfe7 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:47 +0200 Subject: ftrace: add raw output Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 63 +++++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 55 insertions(+), 8 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 42f1926acf73..bebd263f582f 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -153,6 +153,7 @@ enum trace_iterator_flags { TRACE_ITER_SYM_OFFSET = 0x02, TRACE_ITER_SYM_ADDR = 0x04, TRACE_ITER_VERBOSE = 0x08, + TRACE_ITER_RAW = 0x10, }; #define TRACE_ITER_SYM_MASK \ @@ -164,6 +165,7 @@ static const char *trace_options[] = { "sym-offset", "sym-addr", "verbose", + "raw", NULL }; @@ -1099,7 +1101,7 @@ lat_print_timestamp(struct trace_seq *s, unsigned long long abs_usecs, static const char state_to_char[] = TASK_STATE_TO_CHAR_STR; -static notrace void +static notrace int print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) { struct trace_seq *s = &iter->seq; @@ -1154,10 +1156,10 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) default: trace_seq_printf(s, "Unknown type %d\n", entry->type); } + return 1; } -static notrace int -print_trace_fmt(struct trace_iterator *iter) +static notrace int print_trace_fmt(struct trace_iterator *iter) { struct trace_seq *s = &iter->seq; unsigned long sym_flags = (trace_flags & TRACE_ITER_SYM_MASK); @@ -1222,6 +1224,43 @@ print_trace_fmt(struct trace_iterator *iter) return 1; } +static notrace int print_raw_fmt(struct trace_iterator *iter) +{ + struct trace_seq *s = &iter->seq; + struct trace_entry *entry; + int ret; + int S; + + entry = iter->ent; + + ret = trace_seq_printf(s, "%d %d %llu ", + entry->pid, iter->cpu, entry->t); + if (!ret) + return 0; + + switch (entry->type) { + case TRACE_FN: + ret = trace_seq_printf(s, "%x %x\n", + entry->fn.ip, entry->fn.parent_ip); + if (!ret) + return 0; + break; + case TRACE_CTX: + S = entry->ctx.prev_state < sizeof(state_to_char) ? + state_to_char[entry->ctx.prev_state] : 'X'; + ret = trace_seq_printf(s, "%d %d %c %d %d\n", + entry->ctx.prev_pid, + entry->ctx.prev_prio, + S, + entry->ctx.next_pid, + entry->ctx.next_prio); + if (!ret) + return 0; + break; + } + return 1; +} + static int trace_empty(struct trace_iterator *iter) { struct trace_array_cpu *data; @@ -1238,6 +1277,17 @@ static int trace_empty(struct trace_iterator *iter) return 1; } +static int print_trace_line(struct trace_iterator *iter) +{ + if (trace_flags & TRACE_ITER_RAW) + return print_raw_fmt(iter); + + if (iter->iter_flags & TRACE_FILE_LAT_FMT) + return print_lat_fmt(iter, iter->idx, iter->cpu); + + return print_trace_fmt(iter); +} + static int s_show(struct seq_file *m, void *v) { struct trace_iterator *iter = v; @@ -1259,10 +1309,7 @@ static int s_show(struct seq_file *m, void *v) print_func_help_header(m); } } else { - if (iter->iter_flags & TRACE_FILE_LAT_FMT) - print_lat_fmt(iter, iter->idx, iter->cpu); - else - print_trace_fmt(iter); + print_trace_line(iter); trace_print_seq(m, &iter->seq); } @@ -1870,7 +1917,7 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, } while ((entry = find_next_entry_inc(iter)) != NULL) { - ret = print_trace_fmt(iter); + ret = print_trace_line(iter); if (!ret) break; -- cgit v1.2.3 From cb0f12aae8d085140d37ada351aa5a8e76c3f9b0 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:47 +0200 Subject: ftrace: bin-output Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index bebd263f582f..d78cbc4fc519 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -154,6 +154,7 @@ enum trace_iterator_flags { TRACE_ITER_SYM_ADDR = 0x04, TRACE_ITER_VERBOSE = 0x08, TRACE_ITER_RAW = 0x10, + TRACE_ITER_BIN = 0x20, }; #define TRACE_ITER_SYM_MASK \ @@ -166,6 +167,7 @@ static const char *trace_options[] = { "sym-addr", "verbose", "raw", + "bin", NULL }; @@ -275,6 +277,18 @@ trace_seq_putc(struct trace_seq *s, unsigned char c) return 1; } +static notrace int +trace_seq_putmem(struct trace_seq *s, void *mem, size_t len) +{ + if (len > ((PAGE_SIZE - 1) - s->len)) + return 0; + + memcpy(s->buffer + s->len, mem, len); + s->len += len; + + return len; +} + static notrace void trace_seq_reset(struct trace_seq *s) { @@ -1261,6 +1275,39 @@ static notrace int print_raw_fmt(struct trace_iterator *iter) return 1; } +#define SEQ_PUT_FIELD_RET(s, x) \ +do { \ + if (!trace_seq_putmem(s, &(x), sizeof(x))) \ + return 0; \ +} while (0) + +static notrace int print_bin_fmt(struct trace_iterator *iter) +{ + struct trace_seq *s = &iter->seq; + struct trace_entry *entry; + + entry = iter->ent; + + SEQ_PUT_FIELD_RET(s, entry->pid); + SEQ_PUT_FIELD_RET(s, entry->cpu); + SEQ_PUT_FIELD_RET(s, entry->t); + + switch (entry->type) { + case TRACE_FN: + SEQ_PUT_FIELD_RET(s, entry->fn.ip); + SEQ_PUT_FIELD_RET(s, entry->fn.parent_ip); + break; + case TRACE_CTX: + SEQ_PUT_FIELD_RET(s, entry->ctx.prev_pid); + SEQ_PUT_FIELD_RET(s, entry->ctx.prev_prio); + SEQ_PUT_FIELD_RET(s, entry->ctx.prev_state); + SEQ_PUT_FIELD_RET(s, entry->ctx.next_pid); + SEQ_PUT_FIELD_RET(s, entry->ctx.next_prio); + break; + } + return 1; +} + static int trace_empty(struct trace_iterator *iter) { struct trace_array_cpu *data; @@ -1279,6 +1326,9 @@ static int trace_empty(struct trace_iterator *iter) static int print_trace_line(struct trace_iterator *iter) { + if (trace_flags & TRACE_ITER_BIN) + return print_bin_fmt(iter); + if (trace_flags & TRACE_ITER_RAW) return print_raw_fmt(iter); -- cgit v1.2.3 From f0a920d5752e1788c0cba2add103076bcc0f7a49 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:47 +0200 Subject: ftrace: add trace_special() for ad-hoc tracing. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ kernel/trace/trace.h | 15 +++++++++++++++ 2 files changed, 59 insertions(+) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index d78cbc4fc519..fa13059eb462 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -137,6 +137,7 @@ enum trace_type { TRACE_FN, TRACE_CTX, + TRACE_SPECIAL, __TRACE_LAST_TYPE }; @@ -700,6 +701,22 @@ ftrace(struct trace_array *tr, struct trace_array_cpu *data, spin_unlock(&data->lock); } +notrace void +trace_special(struct trace_array *tr, struct trace_array_cpu *data, + unsigned long arg1, unsigned long arg2, unsigned long arg3) +{ + struct trace_entry *entry; + + spin_lock(&data->lock); + entry = tracing_get_trace_entry(tr, data); + tracing_generic_entry_update(entry, 0); + entry->type = TRACE_SPECIAL; + entry->special.arg1 = arg1; + entry->special.arg2 = arg2; + entry->special.arg3 = arg3; + spin_unlock(&data->lock); +} + notrace void tracing_sched_switch_trace(struct trace_array *tr, struct trace_array_cpu *data, @@ -1167,6 +1184,12 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) entry->ctx.next_prio, comm); break; + case TRACE_SPECIAL: + trace_seq_printf(s, " %lx %lx %lx\n", + entry->special.arg1, + entry->special.arg2, + entry->special.arg3); + break; default: trace_seq_printf(s, "Unknown type %d\n", entry->type); } @@ -1234,6 +1257,14 @@ static notrace int print_trace_fmt(struct trace_iterator *iter) if (!ret) return 0; break; + case TRACE_SPECIAL: + ret = trace_seq_printf(s, " %lx %lx %lx\n", + entry->special.arg1, + entry->special.arg2, + entry->special.arg3); + if (!ret) + return 0; + break; } return 1; } @@ -1271,6 +1302,14 @@ static notrace int print_raw_fmt(struct trace_iterator *iter) if (!ret) return 0; break; + case TRACE_SPECIAL: + ret = trace_seq_printf(s, " %lx %lx %lx\n", + entry->special.arg1, + entry->special.arg2, + entry->special.arg3); + if (!ret) + return 0; + break; } return 1; } @@ -1304,6 +1343,11 @@ static notrace int print_bin_fmt(struct trace_iterator *iter) SEQ_PUT_FIELD_RET(s, entry->ctx.next_pid); SEQ_PUT_FIELD_RET(s, entry->ctx.next_prio); break; + case TRACE_SPECIAL: + SEQ_PUT_FIELD_RET(s, entry->special.arg1); + SEQ_PUT_FIELD_RET(s, entry->special.arg2); + SEQ_PUT_FIELD_RET(s, entry->special.arg3); + break; } return 1; } diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 27fa2d06f499..7bdfef35c05a 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -25,6 +25,15 @@ struct ctx_switch_entry { unsigned char next_prio; }; +/* + * Special (free-form) trace entry: + */ +struct special_entry { + unsigned long arg1; + unsigned long arg2; + unsigned long arg3; +}; + /* * The trace entry - the most basic unit of tracing. This is what * is printed in the end as a single line in the trace output, such as: @@ -41,6 +50,7 @@ struct trace_entry { union { struct ftrace_entry fn; struct ctx_switch_entry ctx; + struct special_entry special; }; }; @@ -154,6 +164,11 @@ void tracing_sched_switch_trace(struct trace_array *tr, struct task_struct *next, unsigned long flags); void tracing_record_cmdline(struct task_struct *tsk); +void trace_special(struct trace_array *tr, + struct trace_array_cpu *data, + unsigned long arg1, + unsigned long arg2, + unsigned long arg3); void tracing_start_function_trace(void); void tracing_stop_function_trace(void); -- cgit v1.2.3 From dcb6308f2b56720599f6b9d5a01c33e67e69bde4 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:48 +0200 Subject: ftrace, locking fix should be an irq-safe lock ... Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index fa13059eb462..70f94fa92c10 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -691,14 +691,15 @@ ftrace(struct trace_array *tr, struct trace_array_cpu *data, unsigned long ip, unsigned long parent_ip, unsigned long flags) { struct trace_entry *entry; + unsigned long irq_flags; - spin_lock(&data->lock); + spin_lock_irqsave(&data->lock, irq_flags); entry = tracing_get_trace_entry(tr, data); tracing_generic_entry_update(entry, flags); entry->type = TRACE_FN; entry->fn.ip = ip; entry->fn.parent_ip = parent_ip; - spin_unlock(&data->lock); + spin_unlock_irqrestore(&data->lock, irq_flags); } notrace void @@ -706,15 +707,16 @@ trace_special(struct trace_array *tr, struct trace_array_cpu *data, unsigned long arg1, unsigned long arg2, unsigned long arg3) { struct trace_entry *entry; + unsigned long irq_flags; - spin_lock(&data->lock); + spin_lock_irqsave(&data->lock, irq_flags); entry = tracing_get_trace_entry(tr, data); tracing_generic_entry_update(entry, 0); entry->type = TRACE_SPECIAL; entry->special.arg1 = arg1; entry->special.arg2 = arg2; entry->special.arg3 = arg3; - spin_unlock(&data->lock); + spin_unlock_irqrestore(&data->lock, irq_flags); } notrace void @@ -724,8 +726,9 @@ tracing_sched_switch_trace(struct trace_array *tr, unsigned long flags) { struct trace_entry *entry; + unsigned long irq_flags; - spin_lock(&data->lock); + spin_lock_irqsave(&data->lock, irq_flags); entry = tracing_get_trace_entry(tr, data); tracing_generic_entry_update(entry, flags); entry->type = TRACE_CTX; @@ -734,7 +737,7 @@ tracing_sched_switch_trace(struct trace_array *tr, entry->ctx.prev_state = prev->state; entry->ctx.next_pid = next->pid; entry->ctx.next_prio = next->prio; - spin_unlock(&data->lock); + spin_unlock_irqrestore(&data->lock, irq_flags); } enum trace_file_type { -- cgit v1.2.3 From 088b1e427dbba2af93cb6a7d39258c10ff58dd27 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:48 +0200 Subject: ftrace: pipe fixes Some fixes for better output with the trace pipe. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 70f94fa92c10..c56fc5e60133 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -770,11 +770,6 @@ trace_entry_idx(struct trace_array *tr, struct trace_array_cpu *data, array = page_address(page); - /* Still possible to catch up to the tail */ - if (iter->next_idx[cpu] && array == data->trace_tail && - iter->next_page_idx[cpu] == data->trace_tail_idx) - return NULL; - WARN_ON(iter->next_page_idx[cpu] >= ENTRIES_PER_PAGE); return &array[iter->next_page_idx[cpu]]; } @@ -1921,7 +1916,6 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, struct trace_iterator *iter = filp->private_data; struct trace_array_cpu *data; static cpumask_t mask; - struct trace_entry *entry; static int start; unsigned long flags; int read = 0; @@ -2013,10 +2007,15 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, cpu_set(cpu, mask); } - while ((entry = find_next_entry_inc(iter)) != NULL) { + while (find_next_entry_inc(iter) != NULL) { + int len = iter->seq.len; + ret = print_trace_line(iter); - if (!ret) + if (!ret) { + /* don't print partial lines */ + iter->seq.len = len; break; + } trace_consume(iter); -- cgit v1.2.3 From 37ad508419f0fdfda7b378756eb1f35cfd26d96d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:48 +0200 Subject: ftrace - fix dynamic ftrace memory leak The ftrace dynamic function update allocates a record to store the instruction pointers that are being modified. If the modified instruction pointer fails to update, then the record is marked as failed and nothing more is done. Worse, if the modification fails, but the record ip function is still called, it will allocate a new record and try again. In just a matter of time, will this cause a serious memory leak and crash the system. This patch plugs this memory leak. When a record fails, it is included back into the pool of records to be used. Now a record may fail over and over again, but the number of allocated records will not increase. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 7 ++++--- kernel/trace/ftrace.c | 45 ++++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 46 insertions(+), 6 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index a842d96c6343..61e757bd2350 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -43,9 +43,10 @@ extern void mcount(void); # define FTRACE_HASHSIZE (1<node, &ftrace_hash[key]); } +static notrace void ftrace_free_rec(struct dyn_ftrace *rec) +{ + /* no locking, only called from kstop_machine */ + + rec->ip = (unsigned long)ftrace_free_records; + ftrace_free_records = rec; + rec->flags |= FTRACE_FL_FREE; +} + static notrace struct dyn_ftrace *ftrace_alloc_dyn_node(unsigned long ip) { + struct dyn_ftrace *rec; + + /* First check for freed records */ + if (ftrace_free_records) { + rec = ftrace_free_records; + + /* todo, disable tracing altogether on this warning */ + if (unlikely(!(rec->flags & FTRACE_FL_FREE))) { + WARN_ON_ONCE(1); + ftrace_free_records = NULL; + return NULL; + } + + ftrace_free_records = (void *)rec->ip; + memset(rec, 0, sizeof(*rec)); + return rec; + } + if (ftrace_pages->index == ENTRIES_PER_PAGE) { if (!ftrace_pages->next) return NULL; @@ -356,8 +385,16 @@ __ftrace_replace_code(struct dyn_ftrace *rec, } failed = ftrace_modify_code(ip, old, new); - if (failed) - rec->flags |= FTRACE_FL_FAILED; + if (failed) { + unsigned long key; + /* It is possible that the function hasn't been converted yet */ + key = hash_long(ip, FTRACE_HASHBITS); + if (!ftrace_ip_in_hash(ip, key)) { + rec->flags |= FTRACE_FL_FAILED; + ftrace_free_rec(rec); + } + + } } static void notrace ftrace_replace_code(int enable) @@ -407,8 +444,10 @@ ftrace_code_disable(struct dyn_ftrace *rec) call = ftrace_call_replace(ip, MCOUNT_ADDR); failed = ftrace_modify_code(ip, call, nop); - if (failed) + if (failed) { rec->flags |= FTRACE_FL_FAILED; + ftrace_free_rec(rec); + } } static int notrace __ftrace_modify_code(void *data) -- cgit v1.2.3 From 4eebcc81a33fbc45e28542b50197ed7b3c486d90 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:48 +0200 Subject: ftrace: disable tracing on failure Since ftrace touches practically every function. If we detect any anomaly, we want to fully disable ftrace. This patch adds code to try shutdown ftrace as much as possible without doing any more harm is something is detected not quite correct. This only kills ftrace, this patch does have checks for other parts of the tracer (irqsoff, wakeup, etc.). Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 3 ++ kernel/trace/ftrace.c | 112 ++++++++++++++++++++++++++++++++++++++---- kernel/trace/trace_selftest.c | 4 ++ 3 files changed, 110 insertions(+), 9 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 61e757bd2350..4650a3160b7f 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -58,6 +58,9 @@ struct dyn_ftrace { int ftrace_force_update(void); void ftrace_set_filter(unsigned char *buf, int len, int reset); +/* totally disable ftrace - can not re-enable after this */ +void ftrace_kill(void); + /* defined in arch */ extern int ftrace_ip_converted(unsigned long ip); extern unsigned char *ftrace_nop_replace(void); diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 8e02aa690b2b..ff42345dd78e 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -29,9 +29,16 @@ #include "trace.h" -int ftrace_enabled; +/* ftrace_enabled is a method to turn ftrace on or off */ +int ftrace_enabled __read_mostly; static int last_ftrace_enabled; +/* + * ftrace_disabled is set when an anomaly is discovered. + * ftrace_disabled is much stronger than ftrace_enabled. + */ +static int ftrace_disabled __read_mostly; + static DEFINE_SPINLOCK(ftrace_lock); static DEFINE_MUTEX(ftrace_sysctl_lock); @@ -230,10 +237,11 @@ static notrace struct dyn_ftrace *ftrace_alloc_dyn_node(unsigned long ip) if (ftrace_free_records) { rec = ftrace_free_records; - /* todo, disable tracing altogether on this warning */ if (unlikely(!(rec->flags & FTRACE_FL_FREE))) { WARN_ON_ONCE(1); ftrace_free_records = NULL; + ftrace_disabled = 1; + ftrace_enabled = 0; return NULL; } @@ -260,7 +268,7 @@ ftrace_record_ip(unsigned long ip) int resched; int atomic; - if (!ftrace_enabled) + if (!ftrace_enabled || ftrace_disabled) return; resched = need_resched(); @@ -485,6 +493,9 @@ static void notrace ftrace_startup(void) { int command = 0; + if (unlikely(ftrace_disabled)) + return; + mutex_lock(&ftraced_lock); ftraced_suspend++; if (ftraced_suspend == 1) @@ -507,6 +518,9 @@ static void notrace ftrace_shutdown(void) { int command = 0; + if (unlikely(ftrace_disabled)) + return; + mutex_lock(&ftraced_lock); ftraced_suspend--; if (!ftraced_suspend) @@ -529,6 +543,9 @@ static void notrace ftrace_startup_sysctl(void) { int command = FTRACE_ENABLE_MCOUNT; + if (unlikely(ftrace_disabled)) + return; + mutex_lock(&ftraced_lock); /* Force update next time */ saved_ftrace_func = NULL; @@ -544,6 +561,9 @@ static void notrace ftrace_shutdown_sysctl(void) { int command = FTRACE_DISABLE_MCOUNT; + if (unlikely(ftrace_disabled)) + return; + mutex_lock(&ftraced_lock); /* ftraced_suspend is true if ftrace is running */ if (ftraced_suspend) @@ -600,6 +620,9 @@ static int notrace __ftrace_update_code(void *ignore) static void notrace ftrace_update_code(void) { + if (unlikely(ftrace_disabled)) + return; + stop_machine_run(__ftrace_update_code, NULL, NR_CPUS); } @@ -614,6 +637,9 @@ static int notrace ftraced(void *ignore) /* check once a second */ schedule_timeout(HZ); + if (unlikely(ftrace_disabled)) + continue; + mutex_lock(&ftrace_sysctl_lock); mutex_lock(&ftraced_lock); if (ftrace_enabled && ftraced_trigger && !ftraced_suspend) { @@ -628,6 +654,7 @@ static int notrace ftraced(void *ignore) ftrace_update_cnt != 1 ? "s" : "", ftrace_update_tot_cnt, usecs, usecs != 1 ? "s" : ""); + ftrace_disabled = 1; WARN_ON_ONCE(1); } ftraced_trigger = 0; @@ -785,6 +812,9 @@ ftrace_avail_open(struct inode *inode, struct file *file) struct ftrace_iterator *iter; int ret; + if (unlikely(ftrace_disabled)) + return -ENODEV; + iter = kzalloc(sizeof(*iter), GFP_KERNEL); if (!iter) return -ENOMEM; @@ -843,6 +873,9 @@ ftrace_filter_open(struct inode *inode, struct file *file) struct ftrace_iterator *iter; int ret = 0; + if (unlikely(ftrace_disabled)) + return -ENODEV; + iter = kzalloc(sizeof(*iter), GFP_KERNEL); if (!iter) return -ENOMEM; @@ -1063,6 +1096,9 @@ ftrace_filter_write(struct file *file, const char __user *ubuf, */ notrace void ftrace_set_filter(unsigned char *buf, int len, int reset) { + if (unlikely(ftrace_disabled)) + return; + mutex_lock(&ftrace_filter_lock); if (reset) ftrace_filter_reset(); @@ -1133,7 +1169,7 @@ int ftrace_force_update(void) DECLARE_WAITQUEUE(wait, current); int ret = 0; - if (!ftraced_task) + if (unlikely(ftrace_disabled)) return -ENODEV; mutex_lock(&ftraced_lock); @@ -1142,6 +1178,11 @@ int ftrace_force_update(void) set_current_state(TASK_INTERRUPTIBLE); add_wait_queue(&ftraced_waiters, &wait); + if (unlikely(!ftraced_task)) { + ret = -ENODEV; + goto out; + } + do { mutex_unlock(&ftraced_lock); wake_up_process(ftraced_task); @@ -1154,6 +1195,7 @@ int ftrace_force_update(void) set_current_state(TASK_INTERRUPTIBLE); } while (last_counter == ftraced_iteration_counter); + out: mutex_unlock(&ftraced_lock); remove_wait_queue(&ftraced_waiters, &wait); set_current_state(TASK_RUNNING); @@ -1161,6 +1203,22 @@ int ftrace_force_update(void) return ret; } +static void ftrace_force_shutdown(void) +{ + struct task_struct *task; + int command = FTRACE_DISABLE_CALLS | FTRACE_UPDATE_TRACE_FUNC; + + mutex_lock(&ftraced_lock); + task = ftraced_task; + ftraced_task = NULL; + ftraced_suspend = -1; + ftrace_run_update_code(command); + mutex_unlock(&ftraced_lock); + + if (task) + kthread_stop(task); +} + static __init int ftrace_init_debugfs(void) { struct dentry *d_tracer; @@ -1194,21 +1252,29 @@ static int __init notrace ftrace_dynamic_init(void) stop_machine_run(ftrace_dyn_arch_init, &addr, NR_CPUS); /* ftrace_dyn_arch_init places the return code in addr */ - if (addr) - return addr; + if (addr) { + ret = (int)addr; + goto failed; + } ret = ftrace_dyn_table_alloc(); if (ret) - return ret; + goto failed; p = kthread_run(ftraced, NULL, "ftraced"); - if (IS_ERR(p)) - return -1; + if (IS_ERR(p)) { + ret = -1; + goto failed; + } last_ftrace_enabled = ftrace_enabled = 1; ftraced_task = p; return 0; + + failed: + ftrace_disabled = 1; + return ret; } core_initcall(ftrace_dynamic_init); @@ -1217,8 +1283,30 @@ core_initcall(ftrace_dynamic_init); # define ftrace_shutdown() do { } while (0) # define ftrace_startup_sysctl() do { } while (0) # define ftrace_shutdown_sysctl() do { } while (0) +# define ftrace_force_shutdown() do { } while (0) #endif /* CONFIG_DYNAMIC_FTRACE */ +/** + * ftrace_kill - totally shutdown ftrace + * + * This is a safety measure. If something was detected that seems + * wrong, calling this function will keep ftrace from doing + * any more modifications, and updates. + * used when something went wrong. + */ +void ftrace_kill(void) +{ + mutex_lock(&ftrace_sysctl_lock); + ftrace_disabled = 1; + ftrace_enabled = 0; + + clear_ftrace_function(); + mutex_unlock(&ftrace_sysctl_lock); + + /* Try to totally disable ftrace */ + ftrace_force_shutdown(); +} + /** * register_ftrace_function - register a function for profiling * @ops - ops structure that holds the function for profiling. @@ -1234,6 +1322,9 @@ int register_ftrace_function(struct ftrace_ops *ops) { int ret; + if (unlikely(ftrace_disabled)) + return -1; + mutex_lock(&ftrace_sysctl_lock); ret = __register_ftrace_function(ops); ftrace_startup(); @@ -1267,6 +1358,9 @@ ftrace_enable_sysctl(struct ctl_table *table, int write, { int ret; + if (unlikely(ftrace_disabled)) + return -ENODEV; + mutex_lock(&ftrace_sysctl_lock); ret = proc_dointvec(table, write, file, buffer, lenp, ppos); diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index a6f1ed75f836..85715b86a342 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -248,6 +248,10 @@ trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr) ftrace_enabled = save_ftrace_enabled; tracer_enabled = save_tracer_enabled; + /* kill ftrace totally if we failed */ + if (ret) + ftrace_kill(); + return ret; } #endif /* CONFIG_FTRACE */ -- cgit v1.2.3 From 26994ead1fc8cced63f17e9848edc1771036664e Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:48 +0200 Subject: ftrace: enabled tracing by default This patch is the correct way to have tracing enabled by default. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index c56fc5e60133..3dc6eac85b11 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -107,7 +107,7 @@ static struct trace_array max_tr; static DEFINE_PER_CPU(struct trace_array_cpu, max_data); -static int tracer_enabled; +static int tracer_enabled = 1; static unsigned long trace_nr_entries = 16384UL; static struct tracer *trace_types __read_mostly; @@ -2268,6 +2268,8 @@ __init static int tracer_alloc_buffers(void) int ret = -ENOMEM; int i; + global_trace.ctrl = tracer_enabled; + /* Allocate the first page for all buffers */ for_each_possible_cpu(i) { data = global_trace.data[i] = &per_cpu(global_trace_cpu, i); -- cgit v1.2.3 From 0fd9e0dac9026df09986a4b201518ae015814aef Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:48 +0200 Subject: ftrace: use cpu clock again Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 54 +--------------------------------------------------- 1 file changed, 1 insertion(+), 53 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 3dc6eac85b11..d74c039305ad 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -42,61 +42,9 @@ ns2usecs(cycle_t nsec) return nsec; } -static const int time_sync_freq_max = 128; -static const cycle_t time_sync_thresh = 100000; - -static DEFINE_PER_CPU(cycle_t, time_offset); -static DEFINE_PER_CPU(cycle_t, prev_cpu_time); -static DEFINE_PER_CPU(int, time_sync_count); -static DEFINE_PER_CPU(int, time_sync_freq); - -/* - * Global lock which we take every now and then to synchronize - * the CPUs time. This method is not warp-safe, but it's good - * enough to synchronize slowly diverging time sources and thus - * it's good enough for tracing: - */ -static DEFINE_SPINLOCK(time_sync_lock); -static cycle_t prev_global_time; - -static notrace cycle_t __ftrace_now_sync(cycles_t time, int cpu) -{ - unsigned long flags; - - spin_lock_irqsave(&time_sync_lock, flags); - - /* - * Update the synchronization frequency: - */ - if (per_cpu(time_sync_freq, cpu) < time_sync_freq_max) - per_cpu(time_sync_freq, cpu) *= 2; - per_cpu(time_sync_count, cpu) = per_cpu(time_sync_freq, cpu); - - if (time < prev_global_time) { - per_cpu(time_offset, cpu) += prev_global_time - time; - time = prev_global_time; - } else { - prev_global_time = time; - } - - spin_unlock_irqrestore(&time_sync_lock, flags); - - return time; -} - notrace cycle_t ftrace_now(int cpu) { - cycle_t prev_cpu_time, time, delta_time; - - prev_cpu_time = per_cpu(prev_cpu_time, cpu); - time = sched_clock() + per_cpu(time_offset, cpu); - delta_time = time-prev_cpu_time; - - if (unlikely(delta_time > time_sync_thresh || - --per_cpu(time_sync_count, cpu) <= 0)) - time = __ftrace_now_sync(time, cpu); - - return time; + return cpu_clock(cpu); } static struct trace_array global_trace; -- cgit v1.2.3 From 2e0f57618529a2739a5e1570e6c445c9c966b595 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:49 +0200 Subject: ftrace: build fix Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 111 ++++++++++++++++++++++++----------------- kernel/trace/trace_functions.c | 2 +- 2 files changed, 67 insertions(+), 46 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index d74c039305ad..71b25b79b3de 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -432,47 +432,6 @@ notrace void tracing_reset(struct trace_array_cpu *data) data->trace_tail_idx = 0; } -#ifdef CONFIG_FTRACE -static notrace void -function_trace_call(unsigned long ip, unsigned long parent_ip) -{ - struct trace_array *tr = &global_trace; - struct trace_array_cpu *data; - unsigned long flags; - long disabled; - int cpu; - - if (unlikely(!tracer_enabled)) - return; - - local_irq_save(flags); - cpu = raw_smp_processor_id(); - data = tr->data[cpu]; - disabled = atomic_inc_return(&data->disabled); - - if (likely(disabled == 1)) - ftrace(tr, data, ip, parent_ip, flags); - - atomic_dec(&data->disabled); - local_irq_restore(flags); -} - -static struct ftrace_ops trace_ops __read_mostly = -{ - .func = function_trace_call, -}; -#endif - -notrace void tracing_start_function_trace(void) -{ - register_ftrace_function(&trace_ops); -} - -notrace void tracing_stop_function_trace(void) -{ - unregister_ftrace_function(&trace_ops); -} - #define SAVED_CMDLINES 128 static unsigned map_pid_to_cmdline[PID_MAX_DEFAULT+1]; static unsigned map_cmdline_to_pid[SAVED_CMDLINES]; @@ -635,8 +594,8 @@ tracing_generic_entry_update(struct trace_entry *entry, unsigned long flags) } notrace void -ftrace(struct trace_array *tr, struct trace_array_cpu *data, - unsigned long ip, unsigned long parent_ip, unsigned long flags) +__ftrace(struct trace_array *tr, struct trace_array_cpu *data, + unsigned long ip, unsigned long parent_ip, unsigned long flags) { struct trace_entry *entry; unsigned long irq_flags; @@ -650,6 +609,14 @@ ftrace(struct trace_array *tr, struct trace_array_cpu *data, spin_unlock_irqrestore(&data->lock, irq_flags); } +notrace void +ftrace(struct trace_array *tr, struct trace_array_cpu *data, + unsigned long ip, unsigned long parent_ip, unsigned long flags) +{ + if (likely(!atomic_read(&data->disabled))) + __ftrace(tr, data, ip, parent_ip, flags); +} + notrace void trace_special(struct trace_array *tr, struct trace_array_cpu *data, unsigned long arg1, unsigned long arg2, unsigned long arg3) @@ -688,6 +655,47 @@ tracing_sched_switch_trace(struct trace_array *tr, spin_unlock_irqrestore(&data->lock, irq_flags); } +#ifdef CONFIG_FTRACE +static notrace void +function_trace_call(unsigned long ip, unsigned long parent_ip) +{ + struct trace_array *tr = &global_trace; + struct trace_array_cpu *data; + unsigned long flags; + long disabled; + int cpu; + + if (unlikely(!tracer_enabled)) + return; + + local_irq_save(flags); + cpu = raw_smp_processor_id(); + data = tr->data[cpu]; + disabled = atomic_inc_return(&data->disabled); + + if (likely(disabled == 1)) + __ftrace(tr, data, ip, parent_ip, flags); + + atomic_dec(&data->disabled); + local_irq_restore(flags); +} + +static struct ftrace_ops trace_ops __read_mostly = +{ + .func = function_trace_call, +}; + +notrace void tracing_start_function_trace(void) +{ + register_ftrace_function(&trace_ops); +} + +notrace void tracing_stop_function_trace(void) +{ + unregister_ftrace_function(&trace_ops); +} +#endif + enum trace_file_type { TRACE_FILE_LAT_FMT = 1, }; @@ -722,7 +730,7 @@ trace_entry_idx(struct trace_array *tr, struct trace_array_cpu *data, return &array[iter->next_page_idx[cpu]]; } -static struct notrace trace_entry * +static struct trace_entry * notrace find_next_entry(struct trace_iterator *iter, int *ent_cpu) { struct trace_array *tr = iter->tr; @@ -1866,6 +1874,7 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, static cpumask_t mask; static int start; unsigned long flags; + int ftrace_save; int read = 0; int cpu; int len; @@ -1944,6 +1953,9 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, cpus_clear(mask); local_irq_save(flags); + ftrace_save = ftrace_enabled; + ftrace_enabled = 0; + smp_wmb(); for_each_possible_cpu(cpu) { data = iter->tr->data[cpu]; @@ -1951,10 +1963,14 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, continue; atomic_inc(&data->disabled); - spin_lock(&data->lock); cpu_set(cpu, mask); } + for_each_cpu_mask(cpu, mask) { + data = iter->tr->data[cpu]; + spin_lock(&data->lock); + } + while (find_next_entry_inc(iter) != NULL) { int len = iter->seq.len; @@ -1974,8 +1990,13 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, for_each_cpu_mask(cpu, mask) { data = iter->tr->data[cpu]; spin_unlock(&data->lock); + } + + for_each_cpu_mask(cpu, mask) { + data = iter->tr->data[cpu]; atomic_dec(&data->disabled); } + ftrace_enabled = ftrace_save; local_irq_restore(flags); /* Now copy what we have to the user */ diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c index e5d34b78fc99..69a0eb00a0a5 100644 --- a/kernel/trace/trace_functions.c +++ b/kernel/trace/trace_functions.c @@ -9,10 +9,10 @@ * Copyright (C) 2004-2006 Ingo Molnar * Copyright (C) 2004 William Lee Irwin III */ -#include #include #include #include +#include #include "trace.h" -- cgit v1.2.3 From 5e3ca0ec76fce92daa4eed0d02de9c79b1fe3920 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:49 +0200 Subject: ftrace: introduce the "hex" output method Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 92 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 71b25b79b3de..6974b212e938 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -103,7 +103,8 @@ enum trace_iterator_flags { TRACE_ITER_SYM_ADDR = 0x04, TRACE_ITER_VERBOSE = 0x08, TRACE_ITER_RAW = 0x10, - TRACE_ITER_BIN = 0x20, + TRACE_ITER_HEX = 0x20, + TRACE_ITER_BIN = 0x40, }; #define TRACE_ITER_SYM_MASK \ @@ -116,6 +117,7 @@ static const char *trace_options[] = { "sym-addr", "verbose", "raw", + "hex", "bin", NULL }; @@ -238,6 +240,47 @@ trace_seq_putmem(struct trace_seq *s, void *mem, size_t len) return len; } +#define HEX_CHARS 17 + +static notrace int +trace_seq_putmem_hex(struct trace_seq *s, void *mem, size_t len) +{ + unsigned char hex[HEX_CHARS]; + unsigned char *data; + unsigned char byte; + int i, j; + + BUG_ON(len >= HEX_CHARS); + + data = mem; + +#ifdef __BIG_ENDIAN + for (i = 0, j = 0; i < len; i++) { +#else + for (i = len-1, j = 0; i >= 0; i--) { +#endif + byte = data[i]; + + hex[j] = byte & 0x0f; + if (hex[j] >= 10) + hex[j] += 'a' - 10; + else + hex[j] += '0'; + j++; + + hex[j] = byte >> 4; + if (hex[j] >= 10) + hex[j] += 'a' - 10; + else + hex[j] += '0'; + j++; + } + hex[j] = ' '; + j++; + + return trace_seq_putmem(s, hex, j); +} + static notrace void trace_seq_reset(struct trace_seq *s) { @@ -1274,6 +1317,51 @@ do { \ return 0; \ } while (0) +#define SEQ_PUT_HEX_FIELD_RET(s, x) \ +do { \ + if (!trace_seq_putmem_hex(s, &(x), sizeof(x))) \ + return 0; \ +} while (0) + +static notrace int print_hex_fmt(struct trace_iterator *iter) +{ + struct trace_seq *s = &iter->seq; + unsigned char newline = '\n'; + struct trace_entry *entry; + int S; + + entry = iter->ent; + + SEQ_PUT_HEX_FIELD_RET(s, entry->pid); + SEQ_PUT_HEX_FIELD_RET(s, iter->cpu); + SEQ_PUT_HEX_FIELD_RET(s, entry->t); + + switch (entry->type) { + case TRACE_FN: + SEQ_PUT_HEX_FIELD_RET(s, entry->fn.ip); + SEQ_PUT_HEX_FIELD_RET(s, entry->fn.parent_ip); + break; + case TRACE_CTX: + S = entry->ctx.prev_state < sizeof(state_to_char) ? + state_to_char[entry->ctx.prev_state] : 'X'; + SEQ_PUT_HEX_FIELD_RET(s, entry->ctx.prev_pid); + SEQ_PUT_HEX_FIELD_RET(s, entry->ctx.prev_prio); + SEQ_PUT_HEX_FIELD_RET(s, S); + SEQ_PUT_HEX_FIELD_RET(s, entry->ctx.next_pid); + SEQ_PUT_HEX_FIELD_RET(s, entry->ctx.next_prio); + SEQ_PUT_HEX_FIELD_RET(s, entry->fn.parent_ip); + break; + case TRACE_SPECIAL: + SEQ_PUT_HEX_FIELD_RET(s, entry->special.arg1); + SEQ_PUT_HEX_FIELD_RET(s, entry->special.arg2); + SEQ_PUT_HEX_FIELD_RET(s, entry->special.arg3); + break; + } + SEQ_PUT_FIELD_RET(s, newline); + + return 1; +} + static notrace int print_bin_fmt(struct trace_iterator *iter) { struct trace_seq *s = &iter->seq; @@ -1327,6 +1415,9 @@ static int print_trace_line(struct trace_iterator *iter) if (trace_flags & TRACE_ITER_BIN) return print_bin_fmt(iter); + if (trace_flags & TRACE_ITER_HEX) + return print_hex_fmt(iter); + if (trace_flags & TRACE_ITER_RAW) return print_raw_fmt(iter); -- cgit v1.2.3 From 2577046740fe6d77864128c6187c11125c2449ea Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:49 +0200 Subject: ftrace: build fix no need to backmerge, only affects ftrace-enabled kernels. (which is not the default) Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 6974b212e938..958c4d77a67b 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1965,7 +1965,9 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, static cpumask_t mask; static int start; unsigned long flags; +#ifdef CONFIG_FTRACE int ftrace_save; +#endif int read = 0; int cpu; int len; @@ -2044,8 +2046,10 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, cpus_clear(mask); local_irq_save(flags); +#ifdef CONFIG_FTRACE ftrace_save = ftrace_enabled; ftrace_enabled = 0; +#endif smp_wmb(); for_each_possible_cpu(cpu) { data = iter->tr->data[cpu]; @@ -2087,7 +2091,9 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, data = iter->tr->data[cpu]; atomic_dec(&data->disabled); } +#ifdef CONFIG_FTRACE ftrace_enabled = ftrace_save; +#endif local_irq_restore(flags); /* Now copy what we have to the user */ -- cgit v1.2.3 From aeaee8a2c9cb4489f166ca0e39c568e8254faaa6 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:49 +0200 Subject: ftrace: build fix Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 4650a3160b7f..08fbef1744cc 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -58,9 +58,6 @@ struct dyn_ftrace { int ftrace_force_update(void); void ftrace_set_filter(unsigned char *buf, int len, int reset); -/* totally disable ftrace - can not re-enable after this */ -void ftrace_kill(void); - /* defined in arch */ extern int ftrace_ip_converted(unsigned long ip); extern unsigned char *ftrace_nop_replace(void); @@ -74,10 +71,13 @@ extern void ftrace_caller(void); extern void ftrace_call(void); extern void mcount_call(void); #else -# define ftrace_force_update() ({ 0; }) -# define ftrace_set_filter(buf, len, reset) do { } while (0) +# define ftrace_force_update() ({ 0; }) +# define ftrace_set_filter(buf, len, reset) do { } while (0) #endif +/* totally disable ftrace - can not re-enable after this */ +void ftrace_kill(void); + static inline void tracer_disable(void) { #ifdef CONFIG_FTRACE -- cgit v1.2.3 From 2a2cc8f7c4d0dfd75720867f7dc58d24f075edfc Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Pedersen Date: Mon, 12 May 2008 21:20:49 +0200 Subject: ftrace: allow the event pipe to be polled Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 39 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 958c4d77a67b..d041578affd0 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -63,6 +64,7 @@ static struct tracer *current_trace __read_mostly; static int max_tracer_type_len; static DEFINE_MUTEX(trace_types_lock); +static DECLARE_WAIT_QUEUE_HEAD (trace_wait); #define ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(struct trace_entry)) @@ -105,6 +107,7 @@ enum trace_iterator_flags { TRACE_ITER_RAW = 0x10, TRACE_ITER_HEX = 0x20, TRACE_ITER_BIN = 0x40, + TRACE_ITER_BLOCK = 0x80, }; #define TRACE_ITER_SYM_MASK \ @@ -119,6 +122,7 @@ static const char *trace_options[] = { "raw", "hex", "bin", + "block", NULL }; @@ -650,6 +654,9 @@ __ftrace(struct trace_array *tr, struct trace_array_cpu *data, entry->fn.ip = ip; entry->fn.parent_ip = parent_ip; spin_unlock_irqrestore(&data->lock, irq_flags); + + if (!(trace_flags & TRACE_ITER_BLOCK)) + wake_up (&trace_wait); } notrace void @@ -675,6 +682,9 @@ trace_special(struct trace_array *tr, struct trace_array_cpu *data, entry->special.arg2 = arg2; entry->special.arg3 = arg3; spin_unlock_irqrestore(&data->lock, irq_flags); + + if (!(trace_flags & TRACE_ITER_BLOCK)) + wake_up (&trace_wait); } notrace void @@ -696,6 +706,9 @@ tracing_sched_switch_trace(struct trace_array *tr, entry->ctx.next_pid = next->pid; entry->ctx.next_prio = next->prio; spin_unlock_irqrestore(&data->lock, irq_flags); + + if (!(trace_flags & TRACE_ITER_BLOCK)) + wake_up (&trace_wait); } #ifdef CONFIG_FTRACE @@ -1765,7 +1778,6 @@ static struct file_operations tracing_readme_fops = { .read = tracing_readme_read, }; - static ssize_t tracing_ctrl_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos) @@ -1953,6 +1965,28 @@ static int tracing_release_pipe(struct inode *inode, struct file *file) return 0; } +static unsigned int +tracing_poll_pipe(struct file *filp, poll_table *poll_table) +{ + struct trace_iterator *iter = filp->private_data; + + if (trace_flags & TRACE_ITER_BLOCK) { + /* + * Always select as readable when in blocking mode + */ + return POLLIN | POLLRDNORM; + } + else { + if (!trace_empty(iter)) + return POLLIN | POLLRDNORM; + poll_wait(filp, &trace_wait, poll_table); + if (!trace_empty(iter)) + return POLLIN | POLLRDNORM; + + return 0; + } +} + /* * Consumer reader. */ @@ -1991,6 +2025,8 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, start = 0; while (trace_empty(iter)) { + if (!(trace_flags & TRACE_ITER_BLOCK)) + return -EWOULDBLOCK; /* * This is a make-shift waitqueue. The reason we don't use * an actual wait queue is because: @@ -2134,6 +2170,7 @@ static struct file_operations set_tracer_fops = { static struct file_operations tracing_pipe_fops = { .open = tracing_open_pipe, + .poll = tracing_poll_pipe, .read = tracing_read_pipe, .release = tracing_release_pipe, }; -- cgit v1.2.3 From 6fb44b717c10ecf37beaaebd312f3afa93fed714 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:49 +0200 Subject: ftrace: add trace_function api for other tracers to use A new check was added in the ftrace function that wont trace if the CPU trace buffer is disabled. Unfortunately, other tracers used ftrace() to write to the buffer after they disabled it. The new disable check makes these calls into a nop. This patch changes the __ftrace that is called without the check into a new api for the other tracers to use, called "trace_function". The other tracers use this interface instead when the trace CPU buffer is already disabled. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 8 ++++---- kernel/trace/trace.h | 5 +++++ kernel/trace/trace_irqsoff.c | 10 +++++----- kernel/trace/trace_sched_wakeup.c | 5 +++-- 4 files changed, 17 insertions(+), 11 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index d041578affd0..9022c357032a 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -641,8 +641,8 @@ tracing_generic_entry_update(struct trace_entry *entry, unsigned long flags) } notrace void -__ftrace(struct trace_array *tr, struct trace_array_cpu *data, - unsigned long ip, unsigned long parent_ip, unsigned long flags) +trace_function(struct trace_array *tr, struct trace_array_cpu *data, + unsigned long ip, unsigned long parent_ip, unsigned long flags) { struct trace_entry *entry; unsigned long irq_flags; @@ -664,7 +664,7 @@ ftrace(struct trace_array *tr, struct trace_array_cpu *data, unsigned long ip, unsigned long parent_ip, unsigned long flags) { if (likely(!atomic_read(&data->disabled))) - __ftrace(tr, data, ip, parent_ip, flags); + trace_function(tr, data, ip, parent_ip, flags); } notrace void @@ -730,7 +730,7 @@ function_trace_call(unsigned long ip, unsigned long parent_ip) disabled = atomic_inc_return(&data->disabled); if (likely(disabled == 1)) - __ftrace(tr, data, ip, parent_ip, flags); + trace_function(tr, data, ip, parent_ip, flags); atomic_dec(&data->disabled); local_irq_restore(flags); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 7bdfef35c05a..faf9f67246ac 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -169,6 +169,11 @@ void trace_special(struct trace_array *tr, unsigned long arg1, unsigned long arg2, unsigned long arg3); +void trace_function(struct trace_array *tr, + struct trace_array_cpu *data, + unsigned long ip, + unsigned long parent_ip, + unsigned long flags); void tracing_start_function_trace(void); void tracing_stop_function_trace(void); diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index d2a6e6f1ad2d..3269f4ff5172 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -95,7 +95,7 @@ irqsoff_tracer_call(unsigned long ip, unsigned long parent_ip) disabled = atomic_inc_return(&data->disabled); if (likely(disabled == 1)) - ftrace(tr, data, ip, parent_ip, flags); + trace_function(tr, data, ip, parent_ip, flags); atomic_dec(&data->disabled); } @@ -150,7 +150,7 @@ check_critical_timing(struct trace_array *tr, if (!report_latency(delta)) goto out_unlock; - ftrace(tr, data, CALLER_ADDR0, parent_ip, flags); + trace_function(tr, data, CALLER_ADDR0, parent_ip, flags); latency = nsecs_to_usecs(delta); @@ -188,7 +188,7 @@ out: data->critical_sequence = max_sequence; data->preempt_timestamp = ftrace_now(cpu); tracing_reset(data); - ftrace(tr, data, CALLER_ADDR0, parent_ip, flags); + trace_function(tr, data, CALLER_ADDR0, parent_ip, flags); } static inline void notrace @@ -221,7 +221,7 @@ start_critical_timing(unsigned long ip, unsigned long parent_ip) local_save_flags(flags); - ftrace(tr, data, ip, parent_ip, flags); + trace_function(tr, data, ip, parent_ip, flags); __get_cpu_var(tracing_cpu) = 1; @@ -254,7 +254,7 @@ stop_critical_timing(unsigned long ip, unsigned long parent_ip) atomic_inc(&data->disabled); local_save_flags(flags); - ftrace(tr, data, ip, parent_ip, flags); + trace_function(tr, data, ip, parent_ip, flags); check_critical_timing(tr, data, parent_ip ? : ip, cpu); data->critical_start = 0; atomic_dec(&data->disabled); diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index b7df825c3af9..3549e4154f1f 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -85,7 +85,7 @@ wakeup_sched_switch(struct task_struct *prev, struct task_struct *next) if (unlikely(!tracer_enabled || next != wakeup_task)) goto out_unlock; - ftrace(tr, data, CALLER_ADDR1, CALLER_ADDR2, flags); + trace_function(tr, data, CALLER_ADDR1, CALLER_ADDR2, flags); /* * usecs conversion is slow so we try to delay the conversion @@ -192,7 +192,8 @@ wakeup_check_start(struct trace_array *tr, struct task_struct *p, local_save_flags(flags); tr->data[wakeup_cpu]->preempt_timestamp = ftrace_now(cpu); - ftrace(tr, tr->data[wakeup_cpu], CALLER_ADDR1, CALLER_ADDR2, flags); + trace_function(tr, tr->data[wakeup_cpu], + CALLER_ADDR1, CALLER_ADDR2, flags); out_locked: spin_unlock(&wakeup_lock); -- cgit v1.2.3 From 9ff9cdb2d3b0971f89e899b3420aadd91bddc215 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:50 +0200 Subject: ftrace: cleanups clean up recent code. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/ftrace.c | 5 +++-- kernel/trace/trace_irqsoff.c | 2 +- kernel/trace/trace_selftest.c | 2 +- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index ff42345dd78e..425b1fec3d83 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -197,8 +197,8 @@ static int ftrace_record_suspend; static struct dyn_ftrace *ftrace_free_records; -static inline int -notrace ftrace_ip_in_hash(unsigned long ip, unsigned long key) +static inline int notrace +ftrace_ip_in_hash(unsigned long ip, unsigned long key) { struct dyn_ftrace *p; struct hlist_node *t; @@ -1249,6 +1249,7 @@ static int __init notrace ftrace_dynamic_init(void) int ret; addr = (unsigned long)ftrace_record_ip; + stop_machine_run(ftrace_dyn_arch_init, &addr, NR_CPUS); /* ftrace_dyn_arch_init places the return code in addr */ diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index 3269f4ff5172..2ac0d09db6fb 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -309,7 +309,7 @@ void trace_softirqs_off(unsigned long ip) { } -inline void print_irqtrace_events(struct task_struct *curr) +inline notrace void print_irqtrace_events(struct task_struct *curr) { } diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index 85715b86a342..546307de6e3d 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -3,7 +3,7 @@ #include #include -static inline int trace_valid_entry(struct trace_entry *entry) +static notrace inline int trace_valid_entry(struct trace_entry *entry) { switch (entry->type) { case TRACE_FN: -- cgit v1.2.3 From caf8cdebfb6c1cff50ea8077f1a07c2333d6d1fd Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:50 +0200 Subject: ftrace: remove address of function names PowerPC is very fragile when it comes to use of function names and function addresses. ftrace needs to either use all function addresses or function names (i.e. my_func as suppose to &my_func). This patch chooses to use the names and not the addresses, and makes ftrace consistent. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/ftrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 425b1fec3d83..57350cbd1f61 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -326,8 +326,8 @@ ftrace_record_ip(unsigned long ip) preempt_enable_notrace(); } -#define FTRACE_ADDR ((long)(&ftrace_caller)) -#define MCOUNT_ADDR ((long)(&mcount)) +#define FTRACE_ADDR ((long)(ftrace_caller)) +#define MCOUNT_ADDR ((long)(mcount)) static void notrace __ftrace_replace_code(struct dyn_ftrace *rec, -- cgit v1.2.3 From 3594136ad67a54d77bcb2547e70011754a2f91d5 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:50 +0200 Subject: ftrace: do not profile lib/string.o Most archs define the string and memory compare functions in assembly. Some do not. But these functions may be used in some archs at early boot up. Since most archs define this code in assembly and they are not usually traced, there's no need to trace them when they are not defined in assembly. This patch removes the -pg from the CFLAGS for lib/string.o. This prevents the string functions use in either vdso or early bootup from crashing the system. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- lib/Makefile | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/lib/Makefile b/lib/Makefile index 74b0cfb1fcc3..6ca9e6ee1e33 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -8,6 +8,14 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \ sha1.o irq_regs.o reciprocal_div.o argv_split.o \ proportions.o prio_heap.o ratelimit.o +ifdef CONFIG_FTRACE +# Do not profile string.o, since it may be used in early boot or vdso +ORIG_CFLAGS := $(KBUILD_CFLAGS) +KBUILD_CFLAGS = $(if $(subst string,,$(basename $(notdir $@))), \ + $(ORIG_CFLAGS), \ + $(subst -pg,,$(ORIG_CFLAGS))) +endif + lib-$(CONFIG_MMU) += ioremap.o lib-$(CONFIG_SMP) += cpumask.o -- cgit v1.2.3 From b53dde9d34f2df396540988ebc65c33400f57b04 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:51 +0200 Subject: ftrace: disable -pg for the tracer itself Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/Makefile | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index 3fec653d6533..c25a6cd6a529 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -1,3 +1,11 @@ + +# Do not instrument the tracer itself: + +ifdef CONFIG_FTRACE +ORIG_CFLAGS := $(KBUILD_CFLAGS) +KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS)) +endif + obj-$(CONFIG_FTRACE) += libftrace.o obj-$(CONFIG_TRACING) += trace.o -- cgit v1.2.3 From e309b41dd65aa953f86765eeeecc941d8e1e8b8f Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:51 +0200 Subject: ftrace: remove notrace now that we have a kbuild method for notrace, no need to pollute the C code with the annotations. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/ftrace.c | 66 +++++++++++++-------------- kernel/trace/trace.c | 94 +++++++++++++++++++-------------------- kernel/trace/trace.h | 6 +-- kernel/trace/trace_functions.c | 12 ++--- kernel/trace/trace_irqsoff.c | 40 ++++++++--------- kernel/trace/trace_sched_switch.c | 12 ++--- kernel/trace/trace_sched_wakeup.c | 28 ++++++------ kernel/trace/trace_selftest.c | 2 +- 8 files changed, 130 insertions(+), 130 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 57350cbd1f61..281d97a3208c 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -53,7 +53,7 @@ ftrace_func_t ftrace_trace_function __read_mostly = ftrace_stub; /* mcount is defined per arch in assembly */ EXPORT_SYMBOL(mcount); -notrace void ftrace_list_func(unsigned long ip, unsigned long parent_ip) +void ftrace_list_func(unsigned long ip, unsigned long parent_ip) { struct ftrace_ops *op = ftrace_list; @@ -79,7 +79,7 @@ void clear_ftrace_function(void) ftrace_trace_function = ftrace_stub; } -static int notrace __register_ftrace_function(struct ftrace_ops *ops) +static int __register_ftrace_function(struct ftrace_ops *ops) { /* Should never be called by interrupts */ spin_lock(&ftrace_lock); @@ -110,7 +110,7 @@ static int notrace __register_ftrace_function(struct ftrace_ops *ops) return 0; } -static int notrace __unregister_ftrace_function(struct ftrace_ops *ops) +static int __unregister_ftrace_function(struct ftrace_ops *ops) { struct ftrace_ops **p; int ret = 0; @@ -197,7 +197,7 @@ static int ftrace_record_suspend; static struct dyn_ftrace *ftrace_free_records; -static inline int notrace +static inline int ftrace_ip_in_hash(unsigned long ip, unsigned long key) { struct dyn_ftrace *p; @@ -214,13 +214,13 @@ ftrace_ip_in_hash(unsigned long ip, unsigned long key) return found; } -static inline void notrace +static inline void ftrace_add_hash(struct dyn_ftrace *node, unsigned long key) { hlist_add_head(&node->node, &ftrace_hash[key]); } -static notrace void ftrace_free_rec(struct dyn_ftrace *rec) +static void ftrace_free_rec(struct dyn_ftrace *rec) { /* no locking, only called from kstop_machine */ @@ -229,7 +229,7 @@ static notrace void ftrace_free_rec(struct dyn_ftrace *rec) rec->flags |= FTRACE_FL_FREE; } -static notrace struct dyn_ftrace *ftrace_alloc_dyn_node(unsigned long ip) +static struct dyn_ftrace *ftrace_alloc_dyn_node(unsigned long ip) { struct dyn_ftrace *rec; @@ -259,7 +259,7 @@ static notrace struct dyn_ftrace *ftrace_alloc_dyn_node(unsigned long ip) return &ftrace_pages->records[ftrace_pages->index++]; } -static void notrace +static void ftrace_record_ip(unsigned long ip) { struct dyn_ftrace *node; @@ -329,7 +329,7 @@ ftrace_record_ip(unsigned long ip) #define FTRACE_ADDR ((long)(ftrace_caller)) #define MCOUNT_ADDR ((long)(mcount)) -static void notrace +static void __ftrace_replace_code(struct dyn_ftrace *rec, unsigned char *old, unsigned char *new, int enable) { @@ -405,7 +405,7 @@ __ftrace_replace_code(struct dyn_ftrace *rec, } } -static void notrace ftrace_replace_code(int enable) +static void ftrace_replace_code(int enable) { unsigned char *new = NULL, *old = NULL; struct dyn_ftrace *rec; @@ -430,7 +430,7 @@ static void notrace ftrace_replace_code(int enable) } } -static notrace void ftrace_shutdown_replenish(void) +static void ftrace_shutdown_replenish(void) { if (ftrace_pages->next) return; @@ -439,7 +439,7 @@ static notrace void ftrace_shutdown_replenish(void) ftrace_pages->next = (void *)get_zeroed_page(GFP_KERNEL); } -static notrace void +static void ftrace_code_disable(struct dyn_ftrace *rec) { unsigned long ip; @@ -458,7 +458,7 @@ ftrace_code_disable(struct dyn_ftrace *rec) } } -static int notrace __ftrace_modify_code(void *data) +static int __ftrace_modify_code(void *data) { unsigned long addr; int *command = data; @@ -482,14 +482,14 @@ static int notrace __ftrace_modify_code(void *data) return 0; } -static void notrace ftrace_run_update_code(int command) +static void ftrace_run_update_code(int command) { stop_machine_run(__ftrace_modify_code, &command, NR_CPUS); } static ftrace_func_t saved_ftrace_func; -static void notrace ftrace_startup(void) +static void ftrace_startup(void) { int command = 0; @@ -514,7 +514,7 @@ static void notrace ftrace_startup(void) mutex_unlock(&ftraced_lock); } -static void notrace ftrace_shutdown(void) +static void ftrace_shutdown(void) { int command = 0; @@ -539,7 +539,7 @@ static void notrace ftrace_shutdown(void) mutex_unlock(&ftraced_lock); } -static void notrace ftrace_startup_sysctl(void) +static void ftrace_startup_sysctl(void) { int command = FTRACE_ENABLE_MCOUNT; @@ -557,7 +557,7 @@ static void notrace ftrace_startup_sysctl(void) mutex_unlock(&ftraced_lock); } -static void notrace ftrace_shutdown_sysctl(void) +static void ftrace_shutdown_sysctl(void) { int command = FTRACE_DISABLE_MCOUNT; @@ -577,7 +577,7 @@ static cycle_t ftrace_update_time; static unsigned long ftrace_update_cnt; unsigned long ftrace_update_tot_cnt; -static int notrace __ftrace_update_code(void *ignore) +static int __ftrace_update_code(void *ignore) { struct dyn_ftrace *p; struct hlist_head head; @@ -618,7 +618,7 @@ static int notrace __ftrace_update_code(void *ignore) return 0; } -static void notrace ftrace_update_code(void) +static void ftrace_update_code(void) { if (unlikely(ftrace_disabled)) return; @@ -626,7 +626,7 @@ static void notrace ftrace_update_code(void) stop_machine_run(__ftrace_update_code, NULL, NR_CPUS); } -static int notrace ftraced(void *ignore) +static int ftraced(void *ignore) { unsigned long usecs; @@ -733,7 +733,7 @@ struct ftrace_iterator { unsigned filtered; }; -static void notrace * +static void * t_next(struct seq_file *m, void *v, loff_t *pos) { struct ftrace_iterator *iter = m->private; @@ -806,7 +806,7 @@ static struct seq_operations show_ftrace_seq_ops = { .show = t_show, }; -static int notrace +static int ftrace_avail_open(struct inode *inode, struct file *file) { struct ftrace_iterator *iter; @@ -845,7 +845,7 @@ int ftrace_avail_release(struct inode *inode, struct file *file) return 0; } -static void notrace ftrace_filter_reset(void) +static void ftrace_filter_reset(void) { struct ftrace_page *pg; struct dyn_ftrace *rec; @@ -867,7 +867,7 @@ static void notrace ftrace_filter_reset(void) preempt_enable(); } -static int notrace +static int ftrace_filter_open(struct inode *inode, struct file *file) { struct ftrace_iterator *iter; @@ -903,7 +903,7 @@ ftrace_filter_open(struct inode *inode, struct file *file) return ret; } -static ssize_t notrace +static ssize_t ftrace_filter_read(struct file *file, char __user *ubuf, size_t cnt, loff_t *ppos) { @@ -913,7 +913,7 @@ ftrace_filter_read(struct file *file, char __user *ubuf, return -EPERM; } -static loff_t notrace +static loff_t ftrace_filter_lseek(struct file *file, loff_t offset, int origin) { loff_t ret; @@ -933,7 +933,7 @@ enum { MATCH_END_ONLY, }; -static void notrace +static void ftrace_match(unsigned char *buff, int len) { char str[KSYM_SYMBOL_LEN]; @@ -1002,7 +1002,7 @@ ftrace_match(unsigned char *buff, int len) preempt_enable(); } -static ssize_t notrace +static ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf, size_t cnt, loff_t *ppos) { @@ -1094,7 +1094,7 @@ ftrace_filter_write(struct file *file, const char __user *ubuf, * Filters denote which functions should be enabled when tracing is enabled. * If @buf is NULL and reset is set, all functions will be enabled for tracing. */ -notrace void ftrace_set_filter(unsigned char *buf, int len, int reset) +void ftrace_set_filter(unsigned char *buf, int len, int reset) { if (unlikely(ftrace_disabled)) return; @@ -1107,7 +1107,7 @@ notrace void ftrace_set_filter(unsigned char *buf, int len, int reset) mutex_unlock(&ftrace_filter_lock); } -static int notrace +static int ftrace_filter_release(struct inode *inode, struct file *file) { struct seq_file *m = (struct seq_file *)file->private_data; @@ -1242,7 +1242,7 @@ static __init int ftrace_init_debugfs(void) fs_initcall(ftrace_init_debugfs); -static int __init notrace ftrace_dynamic_init(void) +static int __init ftrace_dynamic_init(void) { struct task_struct *p; unsigned long addr; @@ -1352,7 +1352,7 @@ int unregister_ftrace_function(struct ftrace_ops *ops) return ret; } -notrace int +int ftrace_enable_sysctl(struct ctl_table *table, int write, struct file *file, void __user *buffer, size_t *lenp, loff_t *ppos) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 9022c357032a..f5898051fdd9 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -35,7 +35,7 @@ unsigned long __read_mostly tracing_thresh; static int tracing_disabled = 1; -static long notrace +static long ns2usecs(cycle_t nsec) { nsec += 500; @@ -43,7 +43,7 @@ ns2usecs(cycle_t nsec) return nsec; } -notrace cycle_t ftrace_now(int cpu) +cycle_t ftrace_now(int cpu) { return cpu_clock(cpu); } @@ -135,7 +135,7 @@ static DEFINE_SPINLOCK(ftrace_max_lock); * structure. (this way the maximum trace is permanently saved, * for later retrieval via /debugfs/tracing/latency_trace) */ -static notrace void +static void __update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) { struct trace_array_cpu *data = tr->data[cpu]; @@ -184,7 +184,7 @@ void *head_page(struct trace_array_cpu *data) return page_address(page); } -static notrace int +static int trace_seq_printf(struct trace_seq *s, const char *fmt, ...) { int len = (PAGE_SIZE - 1) - s->len; @@ -207,7 +207,7 @@ trace_seq_printf(struct trace_seq *s, const char *fmt, ...) return len; } -static notrace int +static int trace_seq_puts(struct trace_seq *s, const char *str) { int len = strlen(str); @@ -221,7 +221,7 @@ trace_seq_puts(struct trace_seq *s, const char *str) return len; } -static notrace int +static int trace_seq_putc(struct trace_seq *s, unsigned char c) { if (s->len >= (PAGE_SIZE - 1)) @@ -232,7 +232,7 @@ trace_seq_putc(struct trace_seq *s, unsigned char c) return 1; } -static notrace int +static int trace_seq_putmem(struct trace_seq *s, void *mem, size_t len) { if (len > ((PAGE_SIZE - 1) - s->len)) @@ -246,7 +246,7 @@ trace_seq_putmem(struct trace_seq *s, void *mem, size_t len) #define HEX_CHARS 17 -static notrace int +static int trace_seq_putmem_hex(struct trace_seq *s, void *mem, size_t len) { unsigned char hex[HEX_CHARS]; @@ -285,13 +285,13 @@ trace_seq_putmem_hex(struct trace_seq *s, void *mem, size_t len) return trace_seq_putmem(s, hex, j); } -static notrace void +static void trace_seq_reset(struct trace_seq *s) { s->len = 0; } -static notrace void +static void trace_print_seq(struct seq_file *m, struct trace_seq *s) { int len = s->len >= PAGE_SIZE ? PAGE_SIZE - 1 : s->len; @@ -302,7 +302,7 @@ trace_print_seq(struct seq_file *m, struct trace_seq *s) trace_seq_reset(s); } -notrace static void +static void flip_trace(struct trace_array_cpu *tr1, struct trace_array_cpu *tr2) { struct list_head flip_pages; @@ -323,7 +323,7 @@ flip_trace(struct trace_array_cpu *tr1, struct trace_array_cpu *tr2) check_pages(tr2); } -notrace void +void update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) { struct trace_array_cpu *data; @@ -348,7 +348,7 @@ update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) * @tsk - task with the latency * @cpu - the cpu of the buffer to copy. */ -notrace void +void update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu) { struct trace_array_cpu *data = tr->data[cpu]; @@ -471,7 +471,7 @@ void unregister_tracer(struct tracer *type) mutex_unlock(&trace_types_lock); } -notrace void tracing_reset(struct trace_array_cpu *data) +void tracing_reset(struct trace_array_cpu *data) { data->trace_idx = 0; data->trace_head = data->trace_tail = head_page(data); @@ -494,9 +494,9 @@ static void trace_init_cmdlines(void) cmdline_idx = 0; } -notrace void trace_stop_cmdline_recording(void); +void trace_stop_cmdline_recording(void); -static notrace void trace_save_cmdline(struct task_struct *tsk) +static void trace_save_cmdline(struct task_struct *tsk) { unsigned map; unsigned idx; @@ -531,7 +531,7 @@ static notrace void trace_save_cmdline(struct task_struct *tsk) spin_unlock(&trace_cmdline_lock); } -static notrace char *trace_find_cmdline(int pid) +static char *trace_find_cmdline(int pid) { char *cmdline = "<...>"; unsigned map; @@ -552,7 +552,7 @@ static notrace char *trace_find_cmdline(int pid) return cmdline; } -notrace void tracing_record_cmdline(struct task_struct *tsk) +void tracing_record_cmdline(struct task_struct *tsk) { if (atomic_read(&trace_record_cmdline_disabled)) return; @@ -560,7 +560,7 @@ notrace void tracing_record_cmdline(struct task_struct *tsk) trace_save_cmdline(tsk); } -static inline notrace struct list_head * +static inline struct list_head * trace_next_list(struct trace_array_cpu *data, struct list_head *next) { /* @@ -574,7 +574,7 @@ trace_next_list(struct trace_array_cpu *data, struct list_head *next) return next; } -static inline notrace void * +static inline void * trace_next_page(struct trace_array_cpu *data, void *addr) { struct list_head *next; @@ -588,7 +588,7 @@ trace_next_page(struct trace_array_cpu *data, void *addr) return page_address(page); } -static inline notrace struct trace_entry * +static inline struct trace_entry * tracing_get_trace_entry(struct trace_array *tr, struct trace_array_cpu *data) { unsigned long idx, idx_next; @@ -623,7 +623,7 @@ tracing_get_trace_entry(struct trace_array *tr, struct trace_array_cpu *data) return entry; } -static inline notrace void +static inline void tracing_generic_entry_update(struct trace_entry *entry, unsigned long flags) { struct task_struct *tsk = current; @@ -640,7 +640,7 @@ tracing_generic_entry_update(struct trace_entry *entry, unsigned long flags) (need_resched() ? TRACE_FLAG_NEED_RESCHED : 0); } -notrace void +void trace_function(struct trace_array *tr, struct trace_array_cpu *data, unsigned long ip, unsigned long parent_ip, unsigned long flags) { @@ -659,7 +659,7 @@ trace_function(struct trace_array *tr, struct trace_array_cpu *data, wake_up (&trace_wait); } -notrace void +void ftrace(struct trace_array *tr, struct trace_array_cpu *data, unsigned long ip, unsigned long parent_ip, unsigned long flags) { @@ -667,7 +667,7 @@ ftrace(struct trace_array *tr, struct trace_array_cpu *data, trace_function(tr, data, ip, parent_ip, flags); } -notrace void +void trace_special(struct trace_array *tr, struct trace_array_cpu *data, unsigned long arg1, unsigned long arg2, unsigned long arg3) { @@ -687,7 +687,7 @@ trace_special(struct trace_array *tr, struct trace_array_cpu *data, wake_up (&trace_wait); } -notrace void +void tracing_sched_switch_trace(struct trace_array *tr, struct trace_array_cpu *data, struct task_struct *prev, struct task_struct *next, @@ -712,7 +712,7 @@ tracing_sched_switch_trace(struct trace_array *tr, } #ifdef CONFIG_FTRACE -static notrace void +static void function_trace_call(unsigned long ip, unsigned long parent_ip) { struct trace_array *tr = &global_trace; @@ -741,12 +741,12 @@ static struct ftrace_ops trace_ops __read_mostly = .func = function_trace_call, }; -notrace void tracing_start_function_trace(void) +void tracing_start_function_trace(void) { register_ftrace_function(&trace_ops); } -notrace void tracing_stop_function_trace(void) +void tracing_stop_function_trace(void) { unregister_ftrace_function(&trace_ops); } @@ -786,7 +786,7 @@ trace_entry_idx(struct trace_array *tr, struct trace_array_cpu *data, return &array[iter->next_page_idx[cpu]]; } -static struct trace_entry * notrace +static struct trace_entry * find_next_entry(struct trace_iterator *iter, int *ent_cpu) { struct trace_array *tr = iter->tr; @@ -813,7 +813,7 @@ find_next_entry(struct trace_iterator *iter, int *ent_cpu) return next; } -static notrace void trace_iterator_increment(struct trace_iterator *iter) +static void trace_iterator_increment(struct trace_iterator *iter) { iter->idx++; iter->next_idx[iter->cpu]++; @@ -828,7 +828,7 @@ static notrace void trace_iterator_increment(struct trace_iterator *iter) } } -static notrace void trace_consume(struct trace_iterator *iter) +static void trace_consume(struct trace_iterator *iter) { struct trace_array_cpu *data = iter->tr->data[iter->cpu]; @@ -844,7 +844,7 @@ static notrace void trace_consume(struct trace_iterator *iter) data->trace_idx = 0; } -static notrace void *find_next_entry_inc(struct trace_iterator *iter) +static void *find_next_entry_inc(struct trace_iterator *iter) { struct trace_entry *next; int next_cpu = -1; @@ -863,7 +863,7 @@ static notrace void *find_next_entry_inc(struct trace_iterator *iter) return next ? iter : NULL; } -static notrace void *s_next(struct seq_file *m, void *v, loff_t *pos) +static void *s_next(struct seq_file *m, void *v, loff_t *pos) { struct trace_iterator *iter = m->private; void *last_ent = iter->ent; @@ -978,7 +978,7 @@ seq_print_sym_offset(struct trace_seq *s, const char *fmt, # define IP_FMT "%016lx" #endif -static notrace int +static int seq_print_ip_sym(struct trace_seq *s, unsigned long ip, unsigned long sym_flags) { int ret; @@ -999,7 +999,7 @@ seq_print_ip_sym(struct trace_seq *s, unsigned long ip, unsigned long sym_flags) return ret; } -static notrace void print_lat_help_header(struct seq_file *m) +static void print_lat_help_header(struct seq_file *m) { seq_puts(m, "# _------=> CPU# \n"); seq_puts(m, "# / _-----=> irqs-off \n"); @@ -1012,14 +1012,14 @@ static notrace void print_lat_help_header(struct seq_file *m) seq_puts(m, "# \\ / ||||| \\ | / \n"); } -static notrace void print_func_help_header(struct seq_file *m) +static void print_func_help_header(struct seq_file *m) { seq_puts(m, "# TASK-PID CPU# TIMESTAMP FUNCTION\n"); seq_puts(m, "# | | | | |\n"); } -static notrace void +static void print_trace_header(struct seq_file *m, struct trace_iterator *iter) { unsigned long sym_flags = (trace_flags & TRACE_ITER_SYM_MASK); @@ -1090,7 +1090,7 @@ print_trace_header(struct seq_file *m, struct trace_iterator *iter) seq_puts(m, "\n"); } -static notrace void +static void lat_print_generic(struct trace_seq *s, struct trace_entry *entry, int cpu) { int hardirq, softirq; @@ -1127,7 +1127,7 @@ lat_print_generic(struct trace_seq *s, struct trace_entry *entry, int cpu) unsigned long preempt_mark_thresh = 100; -static notrace void +static void lat_print_timestamp(struct trace_seq *s, unsigned long long abs_usecs, unsigned long rel_usecs) { @@ -1142,7 +1142,7 @@ lat_print_timestamp(struct trace_seq *s, unsigned long long abs_usecs, static const char state_to_char[] = TASK_STATE_TO_CHAR_STR; -static notrace int +static int print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) { struct trace_seq *s = &iter->seq; @@ -1206,7 +1206,7 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) return 1; } -static notrace int print_trace_fmt(struct trace_iterator *iter) +static int print_trace_fmt(struct trace_iterator *iter) { struct trace_seq *s = &iter->seq; unsigned long sym_flags = (trace_flags & TRACE_ITER_SYM_MASK); @@ -1279,7 +1279,7 @@ static notrace int print_trace_fmt(struct trace_iterator *iter) return 1; } -static notrace int print_raw_fmt(struct trace_iterator *iter) +static int print_raw_fmt(struct trace_iterator *iter) { struct trace_seq *s = &iter->seq; struct trace_entry *entry; @@ -1336,7 +1336,7 @@ do { \ return 0; \ } while (0) -static notrace int print_hex_fmt(struct trace_iterator *iter) +static int print_hex_fmt(struct trace_iterator *iter) { struct trace_seq *s = &iter->seq; unsigned char newline = '\n'; @@ -1375,7 +1375,7 @@ static notrace int print_hex_fmt(struct trace_iterator *iter) return 1; } -static notrace int print_bin_fmt(struct trace_iterator *iter) +static int print_bin_fmt(struct trace_iterator *iter) { struct trace_seq *s = &iter->seq; struct trace_entry *entry; @@ -1475,7 +1475,7 @@ static struct seq_operations tracer_seq_ops = { .show = s_show, }; -static struct trace_iterator notrace * +static struct trace_iterator * __tracing_open(struct inode *inode, struct file *file, int *ret) { struct trace_iterator *iter; @@ -1572,7 +1572,7 @@ static int tracing_lt_open(struct inode *inode, struct file *file) } -static notrace void * +static void * t_next(struct seq_file *m, void *v, loff_t *pos) { struct tracer *t = m->private; diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index faf9f67246ac..2b7352bf1ce6 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -150,7 +150,7 @@ struct trace_iterator { long idx; }; -void notrace tracing_reset(struct trace_array_cpu *data); +void tracing_reset(struct trace_array_cpu *data); int tracing_open_generic(struct inode *inode, struct file *filp); struct dentry *tracing_init_dentry(void); void ftrace(struct trace_array *tr, @@ -189,10 +189,10 @@ void update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu); void update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu); -extern notrace cycle_t ftrace_now(int cpu); +extern cycle_t ftrace_now(int cpu); #ifdef CONFIG_SCHED_TRACER -extern void notrace +extern void wakeup_sched_switch(struct task_struct *prev, struct task_struct *next); #else static inline void diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c index 69a0eb00a0a5..4165d34bd28a 100644 --- a/kernel/trace/trace_functions.c +++ b/kernel/trace/trace_functions.c @@ -16,7 +16,7 @@ #include "trace.h" -static notrace void function_reset(struct trace_array *tr) +static void function_reset(struct trace_array *tr) { int cpu; @@ -26,30 +26,30 @@ static notrace void function_reset(struct trace_array *tr) tracing_reset(tr->data[cpu]); } -static notrace void start_function_trace(struct trace_array *tr) +static void start_function_trace(struct trace_array *tr) { function_reset(tr); tracing_start_function_trace(); } -static notrace void stop_function_trace(struct trace_array *tr) +static void stop_function_trace(struct trace_array *tr) { tracing_stop_function_trace(); } -static notrace void function_trace_init(struct trace_array *tr) +static void function_trace_init(struct trace_array *tr) { if (tr->ctrl) start_function_trace(tr); } -static notrace void function_trace_reset(struct trace_array *tr) +static void function_trace_reset(struct trace_array *tr) { if (tr->ctrl) stop_function_trace(tr); } -static notrace void function_trace_ctrl_update(struct trace_array *tr) +static void function_trace_ctrl_update(struct trace_array *tr) { if (tr->ctrl) start_function_trace(tr); diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index 2ac0d09db6fb..7a4dc014b8ab 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -33,7 +33,7 @@ enum { static int trace_type __read_mostly; #ifdef CONFIG_PREEMPT_TRACER -static inline int notrace +static inline int preempt_trace(void) { return ((trace_type & TRACER_PREEMPT_OFF) && preempt_count()); @@ -43,7 +43,7 @@ preempt_trace(void) #endif #ifdef CONFIG_IRQSOFF_TRACER -static inline int notrace +static inline int irq_trace(void) { return ((trace_type & TRACER_IRQS_OFF) && @@ -67,7 +67,7 @@ static __cacheline_aligned_in_smp unsigned long max_sequence; /* * irqsoff uses its own tracer function to keep the overhead down: */ -static void notrace +static void irqsoff_tracer_call(unsigned long ip, unsigned long parent_ip) { struct trace_array *tr = irqsoff_trace; @@ -109,7 +109,7 @@ static struct ftrace_ops trace_ops __read_mostly = /* * Should this new latency be reported/recorded? */ -static int notrace report_latency(cycle_t delta) +static int report_latency(cycle_t delta) { if (tracing_thresh) { if (delta < tracing_thresh) @@ -121,7 +121,7 @@ static int notrace report_latency(cycle_t delta) return 1; } -static void notrace +static void check_critical_timing(struct trace_array *tr, struct trace_array_cpu *data, unsigned long parent_ip, @@ -191,7 +191,7 @@ out: trace_function(tr, data, CALLER_ADDR0, parent_ip, flags); } -static inline void notrace +static inline void start_critical_timing(unsigned long ip, unsigned long parent_ip) { int cpu; @@ -228,7 +228,7 @@ start_critical_timing(unsigned long ip, unsigned long parent_ip) atomic_dec(&data->disabled); } -static inline void notrace +static inline void stop_critical_timing(unsigned long ip, unsigned long parent_ip) { int cpu; @@ -261,13 +261,13 @@ stop_critical_timing(unsigned long ip, unsigned long parent_ip) } /* start and stop critical timings used to for stoppage (in idle) */ -void notrace start_critical_timings(void) +void start_critical_timings(void) { if (preempt_trace() || irq_trace()) start_critical_timing(CALLER_ADDR0, CALLER_ADDR1); } -void notrace stop_critical_timings(void) +void stop_critical_timings(void) { if (preempt_trace() || irq_trace()) stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); @@ -275,13 +275,13 @@ void notrace stop_critical_timings(void) #ifdef CONFIG_IRQSOFF_TRACER #ifdef CONFIG_PROVE_LOCKING -void notrace time_hardirqs_on(unsigned long a0, unsigned long a1) +void time_hardirqs_on(unsigned long a0, unsigned long a1) { if (!preempt_trace() && irq_trace()) stop_critical_timing(a0, a1); } -void notrace time_hardirqs_off(unsigned long a0, unsigned long a1) +void time_hardirqs_off(unsigned long a0, unsigned long a1) { if (!preempt_trace() && irq_trace()) start_critical_timing(a0, a1); @@ -309,35 +309,35 @@ void trace_softirqs_off(unsigned long ip) { } -inline notrace void print_irqtrace_events(struct task_struct *curr) +inline void print_irqtrace_events(struct task_struct *curr) { } /* * We are only interested in hardirq on/off events: */ -void notrace trace_hardirqs_on(void) +void trace_hardirqs_on(void) { if (!preempt_trace() && irq_trace()) stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); } EXPORT_SYMBOL(trace_hardirqs_on); -void notrace trace_hardirqs_off(void) +void trace_hardirqs_off(void) { if (!preempt_trace() && irq_trace()) start_critical_timing(CALLER_ADDR0, CALLER_ADDR1); } EXPORT_SYMBOL(trace_hardirqs_off); -void notrace trace_hardirqs_on_caller(unsigned long caller_addr) +void trace_hardirqs_on_caller(unsigned long caller_addr) { if (!preempt_trace() && irq_trace()) stop_critical_timing(CALLER_ADDR0, caller_addr); } EXPORT_SYMBOL(trace_hardirqs_on_caller); -void notrace trace_hardirqs_off_caller(unsigned long caller_addr) +void trace_hardirqs_off_caller(unsigned long caller_addr) { if (!preempt_trace() && irq_trace()) start_critical_timing(CALLER_ADDR0, caller_addr); @@ -348,12 +348,12 @@ EXPORT_SYMBOL(trace_hardirqs_off_caller); #endif /* CONFIG_IRQSOFF_TRACER */ #ifdef CONFIG_PREEMPT_TRACER -void notrace trace_preempt_on(unsigned long a0, unsigned long a1) +void trace_preempt_on(unsigned long a0, unsigned long a1) { stop_critical_timing(a0, a1); } -void notrace trace_preempt_off(unsigned long a0, unsigned long a1) +void trace_preempt_off(unsigned long a0, unsigned long a1) { start_critical_timing(a0, a1); } @@ -395,14 +395,14 @@ static void irqsoff_tracer_ctrl_update(struct trace_array *tr) stop_irqsoff_tracer(tr); } -static void notrace irqsoff_tracer_open(struct trace_iterator *iter) +static void irqsoff_tracer_open(struct trace_iterator *iter) { /* stop the trace while dumping */ if (iter->tr->ctrl) stop_irqsoff_tracer(iter->tr); } -static void notrace irqsoff_tracer_close(struct trace_iterator *iter) +static void irqsoff_tracer_close(struct trace_iterator *iter) { if (iter->tr->ctrl) start_irqsoff_tracer(iter->tr); diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index 8d656672da93..b738eaca1dbe 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -17,7 +17,7 @@ static struct trace_array *ctx_trace; static int __read_mostly tracer_enabled; -static void notrace +static void ctx_switch_func(struct task_struct *prev, struct task_struct *next) { struct trace_array *tr = ctx_trace; @@ -57,7 +57,7 @@ void ftrace_ctx_switch(struct task_struct *prev, struct task_struct *next) wakeup_sched_switch(prev, next); } -static notrace void sched_switch_reset(struct trace_array *tr) +static void sched_switch_reset(struct trace_array *tr) { int cpu; @@ -67,18 +67,18 @@ static notrace void sched_switch_reset(struct trace_array *tr) tracing_reset(tr->data[cpu]); } -static notrace void start_sched_trace(struct trace_array *tr) +static void start_sched_trace(struct trace_array *tr) { sched_switch_reset(tr); tracer_enabled = 1; } -static notrace void stop_sched_trace(struct trace_array *tr) +static void stop_sched_trace(struct trace_array *tr) { tracer_enabled = 0; } -static notrace void sched_switch_trace_init(struct trace_array *tr) +static void sched_switch_trace_init(struct trace_array *tr) { ctx_trace = tr; @@ -86,7 +86,7 @@ static notrace void sched_switch_trace_init(struct trace_array *tr) start_sched_trace(tr); } -static notrace void sched_switch_trace_reset(struct trace_array *tr) +static void sched_switch_trace_reset(struct trace_array *tr) { if (tr->ctrl) stop_sched_trace(tr); diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 3549e4154f1f..662679c78b66 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -27,12 +27,12 @@ static unsigned wakeup_prio = -1; static DEFINE_SPINLOCK(wakeup_lock); -static void notrace __wakeup_reset(struct trace_array *tr); +static void __wakeup_reset(struct trace_array *tr); /* * Should this new latency be reported/recorded? */ -static int notrace report_latency(cycle_t delta) +static int report_latency(cycle_t delta) { if (tracing_thresh) { if (delta < tracing_thresh) @@ -44,7 +44,7 @@ static int notrace report_latency(cycle_t delta) return 1; } -void notrace +void wakeup_sched_switch(struct task_struct *prev, struct task_struct *next) { unsigned long latency = 0, t0 = 0, t1 = 0; @@ -126,7 +126,7 @@ out: atomic_dec(&tr->data[cpu]->disabled); } -static void notrace __wakeup_reset(struct trace_array *tr) +static void __wakeup_reset(struct trace_array *tr) { struct trace_array_cpu *data; int cpu; @@ -147,7 +147,7 @@ static void notrace __wakeup_reset(struct trace_array *tr) wakeup_task = NULL; } -static void notrace wakeup_reset(struct trace_array *tr) +static void wakeup_reset(struct trace_array *tr) { unsigned long flags; @@ -156,7 +156,7 @@ static void notrace wakeup_reset(struct trace_array *tr) spin_unlock_irqrestore(&wakeup_lock, flags); } -static notrace void +static void wakeup_check_start(struct trace_array *tr, struct task_struct *p, struct task_struct *curr) { @@ -201,7 +201,7 @@ out: atomic_dec(&tr->data[cpu]->disabled); } -notrace void +void ftrace_wake_up_task(struct task_struct *wakee, struct task_struct *curr) { if (likely(!tracer_enabled)) @@ -210,7 +210,7 @@ ftrace_wake_up_task(struct task_struct *wakee, struct task_struct *curr) wakeup_check_start(wakeup_trace, wakee, curr); } -notrace void +void ftrace_wake_up_new_task(struct task_struct *wakee, struct task_struct *curr) { if (likely(!tracer_enabled)) @@ -219,7 +219,7 @@ ftrace_wake_up_new_task(struct task_struct *wakee, struct task_struct *curr) wakeup_check_start(wakeup_trace, wakee, curr); } -static notrace void start_wakeup_tracer(struct trace_array *tr) +static void start_wakeup_tracer(struct trace_array *tr) { wakeup_reset(tr); @@ -237,12 +237,12 @@ static notrace void start_wakeup_tracer(struct trace_array *tr) return; } -static notrace void stop_wakeup_tracer(struct trace_array *tr) +static void stop_wakeup_tracer(struct trace_array *tr) { tracer_enabled = 0; } -static notrace void wakeup_tracer_init(struct trace_array *tr) +static void wakeup_tracer_init(struct trace_array *tr) { wakeup_trace = tr; @@ -250,7 +250,7 @@ static notrace void wakeup_tracer_init(struct trace_array *tr) start_wakeup_tracer(tr); } -static notrace void wakeup_tracer_reset(struct trace_array *tr) +static void wakeup_tracer_reset(struct trace_array *tr) { if (tr->ctrl) { stop_wakeup_tracer(tr); @@ -267,14 +267,14 @@ static void wakeup_tracer_ctrl_update(struct trace_array *tr) stop_wakeup_tracer(tr); } -static void notrace wakeup_tracer_open(struct trace_iterator *iter) +static void wakeup_tracer_open(struct trace_iterator *iter) { /* stop the trace while dumping */ if (iter->tr->ctrl) stop_wakeup_tracer(iter->tr); } -static void notrace wakeup_tracer_close(struct trace_iterator *iter) +static void wakeup_tracer_close(struct trace_iterator *iter) { /* forget about any processes we were recording */ if (iter->tr->ctrl) diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index 546307de6e3d..85715b86a342 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -3,7 +3,7 @@ #include #include -static notrace inline int trace_valid_entry(struct trace_entry *entry) +static inline int trace_valid_entry(struct trace_entry *entry) { switch (entry->type) { case TRACE_FN: -- cgit v1.2.3 From 57422797dc009fc83766bcf230d29dbe6e08e21e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:51 +0200 Subject: ftrace: add wakeup events to sched tracer Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 42 +++++++++++++++++++++++++++++++++++---- kernel/trace/trace.h | 12 +++++++++++ kernel/trace/trace_sched_switch.c | 36 +++++++++++++++++++++++++++++++++ kernel/trace/trace_sched_wakeup.c | 2 +- kernel/trace/trace_selftest.c | 1 + 5 files changed, 88 insertions(+), 5 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index f5898051fdd9..192c1354a7e0 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -57,7 +57,7 @@ static struct trace_array max_tr; static DEFINE_PER_CPU(struct trace_array_cpu, max_data); static int tracer_enabled = 1; -static unsigned long trace_nr_entries = 16384UL; +static unsigned long trace_nr_entries = 65536UL; static struct tracer *trace_types __read_mostly; static struct tracer *current_trace __read_mostly; @@ -87,6 +87,7 @@ enum trace_type { TRACE_FN, TRACE_CTX, + TRACE_WAKE, TRACE_SPECIAL, __TRACE_LAST_TYPE @@ -711,6 +712,30 @@ tracing_sched_switch_trace(struct trace_array *tr, wake_up (&trace_wait); } +void +tracing_sched_wakeup_trace(struct trace_array *tr, + struct trace_array_cpu *data, + struct task_struct *wakee, struct task_struct *curr, + unsigned long flags) +{ + struct trace_entry *entry; + unsigned long irq_flags; + + spin_lock_irqsave(&data->lock, irq_flags); + entry = tracing_get_trace_entry(tr, data); + tracing_generic_entry_update(entry, flags); + entry->type = TRACE_WAKE; + entry->ctx.prev_pid = curr->pid; + entry->ctx.prev_prio = curr->prio; + entry->ctx.prev_state = curr->state; + entry->ctx.next_pid = wakee->pid; + entry->ctx.next_prio = wakee->prio; + spin_unlock_irqrestore(&data->lock, irq_flags); + + if (!(trace_flags & TRACE_ITER_BLOCK)) + wake_up(&trace_wait); +} + #ifdef CONFIG_FTRACE static void function_trace_call(unsigned long ip, unsigned long parent_ip) @@ -1183,13 +1208,14 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) trace_seq_puts(s, ")\n"); break; case TRACE_CTX: + case TRACE_WAKE: S = entry->ctx.prev_state < sizeof(state_to_char) ? state_to_char[entry->ctx.prev_state] : 'X'; comm = trace_find_cmdline(entry->ctx.next_pid); - trace_seq_printf(s, " %d:%d:%c --> %d:%d %s\n", + trace_seq_printf(s, " %5d:%3d:%c %s %5d:%3d %s\n", entry->ctx.prev_pid, entry->ctx.prev_prio, - S, + S, entry->type == TRACE_CTX ? "==>" : " +", entry->ctx.next_pid, entry->ctx.next_prio, comm); @@ -1256,12 +1282,14 @@ static int print_trace_fmt(struct trace_iterator *iter) return 0; break; case TRACE_CTX: + case TRACE_WAKE: S = entry->ctx.prev_state < sizeof(state_to_char) ? state_to_char[entry->ctx.prev_state] : 'X'; - ret = trace_seq_printf(s, " %d:%d:%c ==> %d:%d\n", + ret = trace_seq_printf(s, " %5d:%3d:%c %s %5d:%3d\n", entry->ctx.prev_pid, entry->ctx.prev_prio, S, + entry->type == TRACE_CTX ? "==>" : " +", entry->ctx.next_pid, entry->ctx.next_prio); if (!ret) @@ -1301,8 +1329,11 @@ static int print_raw_fmt(struct trace_iterator *iter) return 0; break; case TRACE_CTX: + case TRACE_WAKE: S = entry->ctx.prev_state < sizeof(state_to_char) ? state_to_char[entry->ctx.prev_state] : 'X'; + if (entry->type == TRACE_WAKE) + S = '+'; ret = trace_seq_printf(s, "%d %d %c %d %d\n", entry->ctx.prev_pid, entry->ctx.prev_prio, @@ -1355,8 +1386,11 @@ static int print_hex_fmt(struct trace_iterator *iter) SEQ_PUT_HEX_FIELD_RET(s, entry->fn.parent_ip); break; case TRACE_CTX: + case TRACE_WAKE: S = entry->ctx.prev_state < sizeof(state_to_char) ? state_to_char[entry->ctx.prev_state] : 'X'; + if (entry->type == TRACE_WAKE) + S = '+'; SEQ_PUT_HEX_FIELD_RET(s, entry->ctx.prev_pid); SEQ_PUT_HEX_FIELD_RET(s, entry->ctx.prev_prio); SEQ_PUT_HEX_FIELD_RET(s, S); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 2b7352bf1ce6..90e0ba0f6eba 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -164,6 +164,12 @@ void tracing_sched_switch_trace(struct trace_array *tr, struct task_struct *next, unsigned long flags); void tracing_record_cmdline(struct task_struct *tsk); + +void tracing_sched_wakeup_trace(struct trace_array *tr, + struct trace_array_cpu *data, + struct task_struct *wakee, + struct task_struct *cur, + unsigned long flags); void trace_special(struct trace_array *tr, struct trace_array_cpu *data, unsigned long arg1, @@ -194,11 +200,17 @@ extern cycle_t ftrace_now(int cpu); #ifdef CONFIG_SCHED_TRACER extern void wakeup_sched_switch(struct task_struct *prev, struct task_struct *next); +extern void +wakeup_sched_wakeup(struct task_struct *wakee, struct task_struct *curr); #else static inline void wakeup_sched_switch(struct task_struct *prev, struct task_struct *next) { } +static inline void +wakeup_sched_wakeup(struct task_struct *wakee, struct task_struct *curr) +{ +} #endif #ifdef CONFIG_CONTEXT_SWITCH_TRACER diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index b738eaca1dbe..8b1cf1a3aee0 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -41,6 +41,29 @@ ctx_switch_func(struct task_struct *prev, struct task_struct *next) local_irq_restore(flags); } +static void wakeup_func(struct task_struct *wakee, struct task_struct *curr) +{ + struct trace_array *tr = ctx_trace; + struct trace_array_cpu *data; + unsigned long flags; + long disabled; + int cpu; + + if (!tracer_enabled) + return; + + local_irq_save(flags); + cpu = raw_smp_processor_id(); + data = tr->data[cpu]; + disabled = atomic_inc_return(&data->disabled); + + if (likely(disabled == 1)) + tracing_sched_wakeup_trace(tr, data, wakee, curr, flags); + + atomic_dec(&data->disabled); + local_irq_restore(flags); +} + void ftrace_ctx_switch(struct task_struct *prev, struct task_struct *next) { tracing_record_cmdline(prev); @@ -57,6 +80,19 @@ void ftrace_ctx_switch(struct task_struct *prev, struct task_struct *next) wakeup_sched_switch(prev, next); } +void +ftrace_wake_up_task(struct task_struct *wakee, struct task_struct *curr) +{ + tracing_record_cmdline(curr); + + wakeup_func(wakee, curr); + + /* + * Chain to the wakeup tracer (this is a NOP if disabled): + */ + wakeup_sched_wakeup(wakee, curr); +} + static void sched_switch_reset(struct trace_array *tr) { int cpu; diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 662679c78b66..87fa7b253b57 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -202,7 +202,7 @@ out: } void -ftrace_wake_up_task(struct task_struct *wakee, struct task_struct *curr) +wakeup_sched_wakeup(struct task_struct *wakee, struct task_struct *curr) { if (likely(!tracer_enabled)) return; diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index 85715b86a342..39dd452647da 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -8,6 +8,7 @@ static inline int trace_valid_entry(struct trace_entry *entry) switch (entry->type) { case TRACE_FN: case TRACE_CTX: + case TRACE_WAKE: return 1; } return 0; -- cgit v1.2.3 From 86387f7ee5d3273ff4859e2c64ce656639b6ca65 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:51 +0200 Subject: ftrace: add stack tracing Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 2 + kernel/trace/Kconfig | 1 + kernel/trace/trace.c | 103 ++++++++++++++++++++++++++++++++++++++++--------- kernel/trace/trace.h | 11 ++++++ 4 files changed, 99 insertions(+), 18 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 08fbef1744cc..0d3714e7110b 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -93,6 +93,7 @@ static inline void tracer_disable(void) # define CALLER_ADDR3 ((unsigned long)__builtin_return_address(3)) # define CALLER_ADDR4 ((unsigned long)__builtin_return_address(4)) # define CALLER_ADDR5 ((unsigned long)__builtin_return_address(5)) +# define CALLER_ADDR6 ((unsigned long)__builtin_return_address(6)) #else # define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) # define CALLER_ADDR1 0UL @@ -100,6 +101,7 @@ static inline void tracer_disable(void) # define CALLER_ADDR3 0UL # define CALLER_ADDR4 0UL # define CALLER_ADDR5 0UL +# define CALLER_ADDR6 0UL #endif #ifdef CONFIG_IRQSOFF_TRACER diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 3f73a1710242..eb1988ed84b7 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -10,6 +10,7 @@ config TRACER_MAX_TRACE config TRACING bool select DEBUG_FS + select STACKTRACE config FTRACE bool "Kernel Function Tracer" diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 192c1354a7e0..b4b1b4fe99fd 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -28,6 +28,8 @@ #include #include +#include + #include "trace.h" unsigned long __read_mostly tracing_max_latency = (cycle_t)ULONG_MAX; @@ -88,6 +90,7 @@ enum trace_type { TRACE_FN, TRACE_CTX, TRACE_WAKE, + TRACE_STACK, TRACE_SPECIAL, __TRACE_LAST_TYPE @@ -109,6 +112,7 @@ enum trace_iterator_flags { TRACE_ITER_HEX = 0x20, TRACE_ITER_BIN = 0x40, TRACE_ITER_BLOCK = 0x80, + TRACE_ITER_STACKTRACE = 0x100, }; #define TRACE_ITER_SYM_MASK \ @@ -124,10 +128,11 @@ static const char *trace_options[] = { "hex", "bin", "block", + "stacktrace", NULL }; -static unsigned trace_flags; +static unsigned trace_flags = TRACE_ITER_PRINT_PARENT | TRACE_ITER_STACKTRACE; static DEFINE_SPINLOCK(ftrace_max_lock); @@ -657,7 +662,7 @@ trace_function(struct trace_array *tr, struct trace_array_cpu *data, spin_unlock_irqrestore(&data->lock, irq_flags); if (!(trace_flags & TRACE_ITER_BLOCK)) - wake_up (&trace_wait); + wake_up(&trace_wait); } void @@ -685,13 +690,39 @@ trace_special(struct trace_array *tr, struct trace_array_cpu *data, spin_unlock_irqrestore(&data->lock, irq_flags); if (!(trace_flags & TRACE_ITER_BLOCK)) - wake_up (&trace_wait); + wake_up(&trace_wait); +} + +void __trace_stack(struct trace_array *tr, + struct trace_array_cpu *data, + unsigned long flags, + int skip) +{ + struct trace_entry *entry; + struct stack_trace trace; + + if (!(trace_flags & TRACE_ITER_STACKTRACE)) + return; + + entry = tracing_get_trace_entry(tr, data); + tracing_generic_entry_update(entry, flags); + entry->type = TRACE_STACK; + + memset(&entry->stack, 0, sizeof(entry->stack)); + + trace.nr_entries = 0; + trace.max_entries = FTRACE_STACK_ENTRIES; + trace.skip = skip; + trace.entries = entry->stack.caller; + + save_stack_trace(&trace); } void tracing_sched_switch_trace(struct trace_array *tr, struct trace_array_cpu *data, - struct task_struct *prev, struct task_struct *next, + struct task_struct *prev, + struct task_struct *next, unsigned long flags) { struct trace_entry *entry; @@ -706,16 +737,18 @@ tracing_sched_switch_trace(struct trace_array *tr, entry->ctx.prev_state = prev->state; entry->ctx.next_pid = next->pid; entry->ctx.next_prio = next->prio; + __trace_stack(tr, data, flags, 4); spin_unlock_irqrestore(&data->lock, irq_flags); if (!(trace_flags & TRACE_ITER_BLOCK)) - wake_up (&trace_wait); + wake_up(&trace_wait); } void tracing_sched_wakeup_trace(struct trace_array *tr, struct trace_array_cpu *data, - struct task_struct *wakee, struct task_struct *curr, + struct task_struct *wakee, + struct task_struct *curr, unsigned long flags) { struct trace_entry *entry; @@ -730,6 +763,7 @@ tracing_sched_wakeup_trace(struct trace_array *tr, entry->ctx.prev_state = curr->state; entry->ctx.next_pid = wakee->pid; entry->ctx.next_prio = wakee->prio; + __trace_stack(tr, data, flags, 5); spin_unlock_irqrestore(&data->lock, irq_flags); if (!(trace_flags & TRACE_ITER_BLOCK)) @@ -1179,6 +1213,7 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) unsigned long rel_usecs; char *comm; int S; + int i; if (!next_entry) next_entry = entry; @@ -1197,8 +1232,10 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) abs_usecs % 1000, rel_usecs/1000, rel_usecs % 1000); } else { - lat_print_generic(s, entry, cpu); - lat_print_timestamp(s, abs_usecs, rel_usecs); + if (entry->type != TRACE_STACK) { + lat_print_generic(s, entry, cpu); + lat_print_timestamp(s, abs_usecs, rel_usecs); + } } switch (entry->type) { case TRACE_FN: @@ -1226,6 +1263,14 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) entry->special.arg2, entry->special.arg3); break; + case TRACE_STACK: + for (i = 0; i < FTRACE_STACK_ENTRIES; i++) { + if (i) + trace_seq_puts(s, " <= "); + seq_print_ip_sym(s, entry->stack.caller[i], sym_flags); + } + trace_seq_puts(s, "\n"); + break; default: trace_seq_printf(s, "Unknown type %d\n", entry->type); } @@ -1241,8 +1286,9 @@ static int print_trace_fmt(struct trace_iterator *iter) unsigned long long t; unsigned long secs; char *comm; - int S; int ret; + int S; + int i; entry = iter->ent; @@ -1252,15 +1298,17 @@ static int print_trace_fmt(struct trace_iterator *iter) usec_rem = do_div(t, 1000000ULL); secs = (unsigned long)t; - ret = trace_seq_printf(s, "%16s-%-5d ", comm, entry->pid); - if (!ret) - return 0; - ret = trace_seq_printf(s, "[%02d] ", iter->cpu); - if (!ret) - return 0; - ret = trace_seq_printf(s, "%5lu.%06lu: ", secs, usec_rem); - if (!ret) - return 0; + if (entry->type != TRACE_STACK) { + ret = trace_seq_printf(s, "%16s-%-5d ", comm, entry->pid); + if (!ret) + return 0; + ret = trace_seq_printf(s, "[%02d] ", iter->cpu); + if (!ret) + return 0; + ret = trace_seq_printf(s, "%5lu.%06lu: ", secs, usec_rem); + if (!ret) + return 0; + } switch (entry->type) { case TRACE_FN: @@ -1303,6 +1351,22 @@ static int print_trace_fmt(struct trace_iterator *iter) if (!ret) return 0; break; + case TRACE_STACK: + for (i = 0; i < FTRACE_STACK_ENTRIES; i++) { + if (i) { + ret = trace_seq_puts(s, " <= "); + if (!ret) + return 0; + } + ret = seq_print_ip_sym(s, entry->stack.caller[i], + sym_flags); + if (!ret) + return 0; + } + ret = trace_seq_puts(s, "\n"); + if (!ret) + return 0; + break; } return 1; } @@ -1344,6 +1408,7 @@ static int print_raw_fmt(struct trace_iterator *iter) return 0; break; case TRACE_SPECIAL: + case TRACE_STACK: ret = trace_seq_printf(s, " %lx %lx %lx\n", entry->special.arg1, entry->special.arg2, @@ -1399,6 +1464,7 @@ static int print_hex_fmt(struct trace_iterator *iter) SEQ_PUT_HEX_FIELD_RET(s, entry->fn.parent_ip); break; case TRACE_SPECIAL: + case TRACE_STACK: SEQ_PUT_HEX_FIELD_RET(s, entry->special.arg1); SEQ_PUT_HEX_FIELD_RET(s, entry->special.arg2); SEQ_PUT_HEX_FIELD_RET(s, entry->special.arg3); @@ -1433,6 +1499,7 @@ static int print_bin_fmt(struct trace_iterator *iter) SEQ_PUT_FIELD_RET(s, entry->ctx.next_prio); break; case TRACE_SPECIAL: + case TRACE_STACK: SEQ_PUT_FIELD_RET(s, entry->special.arg1); SEQ_PUT_FIELD_RET(s, entry->special.arg2); SEQ_PUT_FIELD_RET(s, entry->special.arg3); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 90e0ba0f6eba..387bdcf45e28 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -34,6 +34,16 @@ struct special_entry { unsigned long arg3; }; +/* + * Stack-trace entry: + */ + +#define FTRACE_STACK_ENTRIES 5 + +struct stack_entry { + unsigned long caller[FTRACE_STACK_ENTRIES]; +}; + /* * The trace entry - the most basic unit of tracing. This is what * is printed in the end as a single line in the trace output, such as: @@ -51,6 +61,7 @@ struct trace_entry { struct ftrace_entry fn; struct ctx_switch_entry ctx; struct special_entry special; + struct stack_entry stack; }; }; -- cgit v1.2.3 From 8ac0fca4ccb355ce50471d7aa3f10f5900b28b95 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:51 +0200 Subject: ftrace: sched tracer fix Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/sched.h | 6 ------ kernel/sched.c | 2 +- kernel/trace/trace_sched_wakeup.c | 13 +++---------- 3 files changed, 4 insertions(+), 17 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 6e26f1fdbfe2..05744f9cb096 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2130,17 +2130,11 @@ ftrace_ctx_switch(struct task_struct *prev, struct task_struct *next) #ifdef CONFIG_SCHED_TRACER extern void ftrace_wake_up_task(struct task_struct *wakee, struct task_struct *curr); -extern void -ftrace_wake_up_new_task(struct task_struct *wakee, struct task_struct *curr); #else static inline void ftrace_wake_up_task(struct task_struct *wakee, struct task_struct *curr) { } -static inline void -ftrace_wake_up_new_task(struct task_struct *wakee, struct task_struct *curr) -{ -} #endif extern long sched_setaffinity(pid_t pid, const cpumask_t *new_mask); diff --git a/kernel/sched.c b/kernel/sched.c index 328494e28df2..53ab1174664f 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2613,7 +2613,7 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags) p->sched_class->task_new(rq, p); inc_nr_running(rq); } - ftrace_wake_up_new_task(p, rq->curr); + ftrace_wake_up_task(p, rq->curr); check_preempt_curr(rq, p); #ifdef CONFIG_SMP if (p->sched_class->task_wake_up) diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 87fa7b253b57..2a012423f9d0 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -201,20 +201,13 @@ out: atomic_dec(&tr->data[cpu]->disabled); } -void -wakeup_sched_wakeup(struct task_struct *wakee, struct task_struct *curr) +void wakeup_sched_wakeup(struct task_struct *wakee, struct task_struct *curr) { if (likely(!tracer_enabled)) return; - wakeup_check_start(wakeup_trace, wakee, curr); -} - -void -ftrace_wake_up_new_task(struct task_struct *wakee, struct task_struct *curr) -{ - if (likely(!tracer_enabled)) - return; + tracing_record_cmdline(curr); + tracing_record_cmdline(wakee); wakeup_check_start(wakeup_trace, wakee, curr); } -- cgit v1.2.3 From 4c1f4d4f0175129934d5dbc19a39296430937a05 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:51 +0200 Subject: ftrace: make nostacktrace the default Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b4b1b4fe99fd..0e4b7119e263 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -132,7 +132,7 @@ static const char *trace_options[] = { NULL }; -static unsigned trace_flags = TRACE_ITER_PRINT_PARENT | TRACE_ITER_STACKTRACE; +static unsigned trace_flags = TRACE_ITER_PRINT_PARENT; static DEFINE_SPINLOCK(ftrace_max_lock); -- cgit v1.2.3 From 4e65551905fb0300ae7e667cbaa41ee2e3f29a13 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:52 +0200 Subject: ftrace: sched tracer, trace full rbtree Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/sched.h | 32 ++++++++++++++++------- kernel/sched.c | 35 ++++++++++++++++++++++--- kernel/trace/trace.c | 55 ++++++++++++++++----------------------- kernel/trace/trace.h | 14 ++++++++++ kernel/trace/trace_sched_switch.c | 24 +++++++++++------ 5 files changed, 108 insertions(+), 52 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 05744f9cb096..652d380ae563 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2119,20 +2119,34 @@ static inline void arch_pick_mmap_layout(struct mm_struct *mm) #ifdef CONFIG_CONTEXT_SWITCH_TRACER extern void -ftrace_ctx_switch(struct task_struct *prev, struct task_struct *next); +ftrace_ctx_switch(void *rq, struct task_struct *prev, struct task_struct *next); +extern void +ftrace_wake_up_task(void *rq, struct task_struct *wakee, + struct task_struct *curr); +extern void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data); +extern void +__trace_special(void *__tr, void *__data, + unsigned long arg1, unsigned long arg2, unsigned long arg3); #else static inline void -ftrace_ctx_switch(struct task_struct *prev, struct task_struct *next) +ftrace_ctx_switch(void *rq, struct task_struct *prev, struct task_struct *next) +{ +} +static inline void +sched_trace_special(unsigned long p1, unsigned long p2, unsigned long p3) +{ +} +static inline void +ftrace_wake_up_task(void *rq, struct task_struct *wakee, + struct task_struct *curr) +{ +} +static inline void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data) { } -#endif - -#ifdef CONFIG_SCHED_TRACER -extern void -ftrace_wake_up_task(struct task_struct *wakee, struct task_struct *curr); -#else static inline void -ftrace_wake_up_task(struct task_struct *wakee, struct task_struct *curr) +__trace_special(void *__tr, void *__data, + unsigned long arg1, unsigned long arg2, unsigned long arg3) { } #endif diff --git a/kernel/sched.c b/kernel/sched.c index 53ab1174664f..b9208a0e33a0 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2394,6 +2394,35 @@ static int sched_balance_self(int cpu, int flag) #endif /* CONFIG_SMP */ +#ifdef CONFIG_CONTEXT_SWITCH_TRACER + +void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data) +{ + struct sched_entity *se; + struct task_struct *p; + struct rb_node *curr; + struct rq *rq = __rq; + + curr = first_fair(&rq->cfs); + if (!curr) + return; + + while (curr) { + se = rb_entry(curr, struct sched_entity, run_node); + if (!entity_is_task(se)) + continue; + + p = task_of(se); + + __trace_special(__tr, __data, + p->pid, p->se.vruntime, p->se.sum_exec_runtime); + + curr = rb_next(curr); + } +} + +#endif + /*** * try_to_wake_up - wake up a thread * @p: the to-be-woken-up thread @@ -2468,7 +2497,7 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync) out_activate: #endif /* CONFIG_SMP */ - ftrace_wake_up_task(p, rq->curr); + ftrace_wake_up_task(rq, p, rq->curr); schedstat_inc(p, se.nr_wakeups); if (sync) schedstat_inc(p, se.nr_wakeups_sync); @@ -2613,7 +2642,7 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags) p->sched_class->task_new(rq, p); inc_nr_running(rq); } - ftrace_wake_up_task(p, rq->curr); + ftrace_wake_up_task(rq, p, rq->curr); check_preempt_curr(rq, p); #ifdef CONFIG_SMP if (p->sched_class->task_wake_up) @@ -2786,7 +2815,7 @@ context_switch(struct rq *rq, struct task_struct *prev, struct mm_struct *mm, *oldmm; prepare_task_switch(rq, prev, next); - ftrace_ctx_switch(prev, next); + ftrace_ctx_switch(rq, prev, next); mm = next->mm; oldmm = prev->active_mm; /* diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 0e4b7119e263..65173b14b914 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -66,7 +66,18 @@ static struct tracer *current_trace __read_mostly; static int max_tracer_type_len; static DEFINE_MUTEX(trace_types_lock); -static DECLARE_WAIT_QUEUE_HEAD (trace_wait); +static DECLARE_WAIT_QUEUE_HEAD(trace_wait); + +unsigned long trace_flags = TRACE_ITER_PRINT_PARENT; + +/* + * FIXME: where should this be called? + */ +void trace_wake_up(void) +{ + if (!(trace_flags & TRACE_ITER_BLOCK)) + wake_up(&trace_wait); +} #define ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(struct trace_entry)) @@ -103,18 +114,6 @@ enum trace_flag_type { TRACE_FLAG_SOFTIRQ = 0x08, }; -enum trace_iterator_flags { - TRACE_ITER_PRINT_PARENT = 0x01, - TRACE_ITER_SYM_OFFSET = 0x02, - TRACE_ITER_SYM_ADDR = 0x04, - TRACE_ITER_VERBOSE = 0x08, - TRACE_ITER_RAW = 0x10, - TRACE_ITER_HEX = 0x20, - TRACE_ITER_BIN = 0x40, - TRACE_ITER_BLOCK = 0x80, - TRACE_ITER_STACKTRACE = 0x100, -}; - #define TRACE_ITER_SYM_MASK \ (TRACE_ITER_PRINT_PARENT|TRACE_ITER_SYM_OFFSET|TRACE_ITER_SYM_ADDR) @@ -132,8 +131,6 @@ static const char *trace_options[] = { NULL }; -static unsigned trace_flags = TRACE_ITER_PRINT_PARENT; - static DEFINE_SPINLOCK(ftrace_max_lock); /* @@ -660,9 +657,6 @@ trace_function(struct trace_array *tr, struct trace_array_cpu *data, entry->fn.ip = ip; entry->fn.parent_ip = parent_ip; spin_unlock_irqrestore(&data->lock, irq_flags); - - if (!(trace_flags & TRACE_ITER_BLOCK)) - wake_up(&trace_wait); } void @@ -673,10 +667,14 @@ ftrace(struct trace_array *tr, struct trace_array_cpu *data, trace_function(tr, data, ip, parent_ip, flags); } +#ifdef CONFIG_CONTEXT_SWITCH_TRACER + void -trace_special(struct trace_array *tr, struct trace_array_cpu *data, - unsigned long arg1, unsigned long arg2, unsigned long arg3) +__trace_special(void *__tr, void *__data, + unsigned long arg1, unsigned long arg2, unsigned long arg3) { + struct trace_array_cpu *data = __data; + struct trace_array *tr = __tr; struct trace_entry *entry; unsigned long irq_flags; @@ -688,11 +686,10 @@ trace_special(struct trace_array *tr, struct trace_array_cpu *data, entry->special.arg2 = arg2; entry->special.arg3 = arg3; spin_unlock_irqrestore(&data->lock, irq_flags); - - if (!(trace_flags & TRACE_ITER_BLOCK)) - wake_up(&trace_wait); } +#endif + void __trace_stack(struct trace_array *tr, struct trace_array_cpu *data, unsigned long flags, @@ -739,9 +736,6 @@ tracing_sched_switch_trace(struct trace_array *tr, entry->ctx.next_prio = next->prio; __trace_stack(tr, data, flags, 4); spin_unlock_irqrestore(&data->lock, irq_flags); - - if (!(trace_flags & TRACE_ITER_BLOCK)) - wake_up(&trace_wait); } void @@ -765,9 +759,6 @@ tracing_sched_wakeup_trace(struct trace_array *tr, entry->ctx.next_prio = wakee->prio; __trace_stack(tr, data, flags, 5); spin_unlock_irqrestore(&data->lock, irq_flags); - - if (!(trace_flags & TRACE_ITER_BLOCK)) - wake_up(&trace_wait); } #ifdef CONFIG_FTRACE @@ -1258,7 +1249,7 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) comm); break; case TRACE_SPECIAL: - trace_seq_printf(s, " %lx %lx %lx\n", + trace_seq_printf(s, " %ld %ld %ld\n", entry->special.arg1, entry->special.arg2, entry->special.arg3); @@ -1344,7 +1335,7 @@ static int print_trace_fmt(struct trace_iterator *iter) return 0; break; case TRACE_SPECIAL: - ret = trace_seq_printf(s, " %lx %lx %lx\n", + ret = trace_seq_printf(s, " %ld %ld %ld\n", entry->special.arg1, entry->special.arg2, entry->special.arg3); @@ -1409,7 +1400,7 @@ static int print_raw_fmt(struct trace_iterator *iter) break; case TRACE_SPECIAL: case TRACE_STACK: - ret = trace_seq_printf(s, " %lx %lx %lx\n", + ret = trace_seq_printf(s, " %ld %ld %ld\n", entry->special.arg1, entry->special.arg2, entry->special.arg3); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 387bdcf45e28..75e237475674 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -274,4 +274,18 @@ extern int trace_selftest_startup_sched_switch(struct tracer *trace, extern void *head_page(struct trace_array_cpu *data); +extern unsigned long trace_flags; + +enum trace_iterator_flags { + TRACE_ITER_PRINT_PARENT = 0x01, + TRACE_ITER_SYM_OFFSET = 0x02, + TRACE_ITER_SYM_ADDR = 0x04, + TRACE_ITER_VERBOSE = 0x08, + TRACE_ITER_RAW = 0x10, + TRACE_ITER_HEX = 0x20, + TRACE_ITER_BIN = 0x40, + TRACE_ITER_BLOCK = 0x80, + TRACE_ITER_STACKTRACE = 0x100, +}; + #endif /* _LINUX_KERNEL_TRACE_H */ diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index 8b1cf1a3aee0..12658b3f2b28 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -18,7 +18,7 @@ static struct trace_array *ctx_trace; static int __read_mostly tracer_enabled; static void -ctx_switch_func(struct task_struct *prev, struct task_struct *next) +ctx_switch_func(void *__rq, struct task_struct *prev, struct task_struct *next) { struct trace_array *tr = ctx_trace; struct trace_array_cpu *data; @@ -34,14 +34,17 @@ ctx_switch_func(struct task_struct *prev, struct task_struct *next) data = tr->data[cpu]; disabled = atomic_inc_return(&data->disabled); - if (likely(disabled == 1)) + if (likely(disabled == 1)) { tracing_sched_switch_trace(tr, data, prev, next, flags); + ftrace_all_fair_tasks(__rq, tr, data); + } atomic_dec(&data->disabled); local_irq_restore(flags); } -static void wakeup_func(struct task_struct *wakee, struct task_struct *curr) +static void +wakeup_func(void *__rq, struct task_struct *wakee, struct task_struct *curr) { struct trace_array *tr = ctx_trace; struct trace_array_cpu *data; @@ -57,14 +60,18 @@ static void wakeup_func(struct task_struct *wakee, struct task_struct *curr) data = tr->data[cpu]; disabled = atomic_inc_return(&data->disabled); - if (likely(disabled == 1)) + if (likely(disabled == 1)) { tracing_sched_wakeup_trace(tr, data, wakee, curr, flags); + ftrace_all_fair_tasks(__rq, tr, data); + } atomic_dec(&data->disabled); local_irq_restore(flags); } -void ftrace_ctx_switch(struct task_struct *prev, struct task_struct *next) +void +ftrace_ctx_switch(void *__rq, struct task_struct *prev, + struct task_struct *next) { tracing_record_cmdline(prev); @@ -72,7 +79,7 @@ void ftrace_ctx_switch(struct task_struct *prev, struct task_struct *next) * If tracer_switch_func only points to the local * switch func, it still needs the ptr passed to it. */ - ctx_switch_func(prev, next); + ctx_switch_func(__rq, prev, next); /* * Chain to the wakeup tracer (this is a NOP if disabled): @@ -81,11 +88,12 @@ void ftrace_ctx_switch(struct task_struct *prev, struct task_struct *next) } void -ftrace_wake_up_task(struct task_struct *wakee, struct task_struct *curr) +ftrace_wake_up_task(void *__rq, struct task_struct *wakee, + struct task_struct *curr) { tracing_record_cmdline(curr); - wakeup_func(wakee, curr); + wakeup_func(__rq, wakee, curr); /* * Chain to the wakeup tracer (this is a NOP if disabled): -- cgit v1.2.3 From 24cd5d111e8c713e62cda7ca1d01232402e3d3c9 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:52 +0200 Subject: ftrace: trace curr/next tasks Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/sched.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index b9208a0e33a0..673b588b713b 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2398,8 +2398,8 @@ static int sched_balance_self(int cpu, int flag) void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data) { - struct sched_entity *se; struct task_struct *p; + struct sched_entity *se; struct rb_node *curr; struct rq *rq = __rq; @@ -2407,6 +2407,17 @@ void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data) if (!curr) return; + if (rq->cfs.curr) { + p = task_of(rq->cfs.curr); + __trace_special(__tr, __data, + p->pid, p->se.vruntime, p->se.sum_exec_runtime); + } + if (rq->cfs.next) { + p = task_of(rq->cfs.next); + __trace_special(__tr, __data, + p->pid, p->se.vruntime, p->se.sum_exec_runtime); + } + while (curr) { se = rb_entry(curr, struct sched_entity, run_node); if (!entity_is_task(se)) -- cgit v1.2.3 From 017730c11241e26577673eb9d957cfc66172ea91 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:52 +0200 Subject: ftrace: fix wakeups Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/sched.h | 2 ++ kernel/sched.c | 18 ++++++++++++++++++ kernel/trace/trace.c | 15 +++++++++++---- 3 files changed, 31 insertions(+), 4 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 652d380ae563..a3970b563757 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -246,6 +246,8 @@ extern asmlinkage void schedule_tail(struct task_struct *prev); extern void init_idle(struct task_struct *idle, int cpu); extern void init_idle_bootup_task(struct task_struct *idle); +extern int runqueue_is_locked(void); + extern cpumask_t nohz_cpu_mask; #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ) extern int select_nohz_load_balancer(int cpu); diff --git a/kernel/sched.c b/kernel/sched.c index 673b588b713b..9ca4a2e6a236 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -642,6 +642,24 @@ static inline void update_rq_clock(struct rq *rq) # define const_debug static const #endif +/** + * runqueue_is_locked + * + * Returns true if the current cpu runqueue is locked. + * This interface allows printk to be called with the runqueue lock + * held and know whether or not it is OK to wake up the klogd. + */ +int runqueue_is_locked(void) +{ + int cpu = get_cpu(); + struct rq *rq = cpu_rq(cpu); + int ret; + + ret = spin_is_locked(&rq->lock); + put_cpu(); + return ret; +} + /* * Debugging: various feature bits */ diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 65173b14b914..2ca9d66aa74e 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -70,12 +70,13 @@ static DECLARE_WAIT_QUEUE_HEAD(trace_wait); unsigned long trace_flags = TRACE_ITER_PRINT_PARENT; -/* - * FIXME: where should this be called? - */ void trace_wake_up(void) { - if (!(trace_flags & TRACE_ITER_BLOCK)) + /* + * The runqueue_is_locked() can fail, but this is the best we + * have for now: + */ + if (!(trace_flags & TRACE_ITER_BLOCK) && !runqueue_is_locked()) wake_up(&trace_wait); } @@ -657,6 +658,8 @@ trace_function(struct trace_array *tr, struct trace_array_cpu *data, entry->fn.ip = ip; entry->fn.parent_ip = parent_ip; spin_unlock_irqrestore(&data->lock, irq_flags); + + trace_wake_up(); } void @@ -686,6 +689,8 @@ __trace_special(void *__tr, void *__data, entry->special.arg2 = arg2; entry->special.arg3 = arg3; spin_unlock_irqrestore(&data->lock, irq_flags); + + trace_wake_up(); } #endif @@ -759,6 +764,8 @@ tracing_sched_wakeup_trace(struct trace_array *tr, entry->ctx.next_prio = wakee->prio; __trace_stack(tr, data, flags, 5); spin_unlock_irqrestore(&data->lock, irq_flags); + + trace_wake_up(); } #ifdef CONFIG_FTRACE -- cgit v1.2.3 From 1a3c3034336320554a3342572dae98d69e054fc7 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:52 +0200 Subject: ftrace: fix __trace_special() Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/sched.h | 20 ++++++++++++-------- kernel/trace/trace.c | 4 ---- 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index a3970b563757..5b186bed54bc 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2119,6 +2119,18 @@ static inline void arch_pick_mmap_layout(struct mm_struct *mm) } #endif +#ifdef CONFIG_TRACING +extern void +__trace_special(void *__tr, void *__data, + unsigned long arg1, unsigned long arg2, unsigned long arg3); +#else +static inline void +__trace_special(void *__tr, void *__data, + unsigned long arg1, unsigned long arg2, unsigned long arg3) +{ +} +#endif + #ifdef CONFIG_CONTEXT_SWITCH_TRACER extern void ftrace_ctx_switch(void *rq, struct task_struct *prev, struct task_struct *next); @@ -2126,9 +2138,6 @@ extern void ftrace_wake_up_task(void *rq, struct task_struct *wakee, struct task_struct *curr); extern void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data); -extern void -__trace_special(void *__tr, void *__data, - unsigned long arg1, unsigned long arg2, unsigned long arg3); #else static inline void ftrace_ctx_switch(void *rq, struct task_struct *prev, struct task_struct *next) @@ -2146,11 +2155,6 @@ ftrace_wake_up_task(void *rq, struct task_struct *wakee, static inline void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data) { } -static inline void -__trace_special(void *__tr, void *__data, - unsigned long arg1, unsigned long arg2, unsigned long arg3) -{ -} #endif extern long sched_setaffinity(pid_t pid, const cpumask_t *new_mask); diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 2ca9d66aa74e..65d2c0a61ed4 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -670,8 +670,6 @@ ftrace(struct trace_array *tr, struct trace_array_cpu *data, trace_function(tr, data, ip, parent_ip, flags); } -#ifdef CONFIG_CONTEXT_SWITCH_TRACER - void __trace_special(void *__tr, void *__data, unsigned long arg1, unsigned long arg2, unsigned long arg3) @@ -693,8 +691,6 @@ __trace_special(void *__tr, void *__data, trace_wake_up(); } -#endif - void __trace_stack(struct trace_array *tr, struct trace_array_cpu *data, unsigned long flags, -- cgit v1.2.3 From 4ac3ba41d372e3a9e420b36bc43589662b188a14 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:52 +0200 Subject: ftrace: trace scheduler rbtree Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 1 + kernel/trace/trace.h | 1 + kernel/trace/trace_sched_switch.c | 6 ++++-- 3 files changed, 6 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 65d2c0a61ed4..06380dc1ebe0 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -129,6 +129,7 @@ static const char *trace_options[] = { "bin", "block", "stacktrace", + "sched-tree", NULL }; diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 75e237475674..a52015702a28 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -286,6 +286,7 @@ enum trace_iterator_flags { TRACE_ITER_BIN = 0x40, TRACE_ITER_BLOCK = 0x80, TRACE_ITER_STACKTRACE = 0x100, + TRACE_ITER_SCHED_TREE = 0x200, }; #endif /* _LINUX_KERNEL_TRACE_H */ diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index 12658b3f2b28..5555b906a666 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -36,7 +36,8 @@ ctx_switch_func(void *__rq, struct task_struct *prev, struct task_struct *next) if (likely(disabled == 1)) { tracing_sched_switch_trace(tr, data, prev, next, flags); - ftrace_all_fair_tasks(__rq, tr, data); + if (trace_flags & TRACE_ITER_SCHED_TREE) + ftrace_all_fair_tasks(__rq, tr, data); } atomic_dec(&data->disabled); @@ -62,7 +63,8 @@ wakeup_func(void *__rq, struct task_struct *wakee, struct task_struct *curr) if (likely(disabled == 1)) { tracing_sched_wakeup_trace(tr, data, wakee, curr, flags); - ftrace_all_fair_tasks(__rq, tr, data); + if (trace_flags & TRACE_ITER_SCHED_TREE) + ftrace_all_fair_tasks(__rq, tr, data); } atomic_dec(&data->disabled); -- cgit v1.2.3 From c7078de1aaf562a31b20984409c38cc1b40fa8a3 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:52 +0200 Subject: ftrace: add tracing_cpumask Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 70 insertions(+), 8 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 06380dc1ebe0..18f0ab88ca85 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -70,6 +70,23 @@ static DECLARE_WAIT_QUEUE_HEAD(trace_wait); unsigned long trace_flags = TRACE_ITER_PRINT_PARENT; +/* + * Only trace on a CPU if the bitmask is set: + */ +static cpumask_t tracing_cpumask __read_mostly = CPU_MASK_ALL; + +/* + * The tracer itself will not take this lock, but still we want + * to provide a consistent cpumask to user-space: + */ +static DEFINE_MUTEX(tracing_cpumask_update_lock); + +/* + * Temporary storage for the character representation of the + * CPU bitmask: + */ +static char mask_str[NR_CPUS]; + void trace_wake_up(void) { /* @@ -1754,9 +1771,49 @@ static struct file_operations tracing_lt_fops = { }; static struct file_operations show_traces_fops = { - .open = show_traces_open, - .read = seq_read, - .release = seq_release, + .open = show_traces_open, + .read = seq_read, + .release = seq_release, +}; + +static ssize_t +tracing_cpumask_read(struct file *filp, char __user *ubuf, + size_t count, loff_t *ppos) +{ + int err; + + count = min(count, (size_t)NR_CPUS); + + mutex_lock(&tracing_cpumask_update_lock); + cpumask_scnprintf(mask_str, NR_CPUS, tracing_cpumask); + err = copy_to_user(ubuf, mask_str, count); + if (err) + count = -EFAULT; + mutex_unlock(&tracing_cpumask_update_lock); + + return count; +} + +static ssize_t +tracing_cpumask_write(struct file *filp, const char __user *ubuf, + size_t count, loff_t *ppos) +{ + int err; + + mutex_lock(&tracing_cpumask_update_lock); + err = cpumask_parse_user(ubuf, count, tracing_cpumask); + mutex_unlock(&tracing_cpumask_update_lock); + + if (err) + return err; + + return count; +} + +static struct file_operations tracing_cpumask_fops = { + .open = tracing_open_generic, + .read = tracing_cpumask_read, + .write = tracing_cpumask_write, }; static ssize_t @@ -1837,9 +1894,9 @@ tracing_iter_ctrl_write(struct file *filp, const char __user *ubuf, } static struct file_operations tracing_iter_fops = { - .open = tracing_open_generic, - .read = tracing_iter_ctrl_read, - .write = tracing_iter_ctrl_write, + .open = tracing_open_generic, + .read = tracing_iter_ctrl_read, + .write = tracing_iter_ctrl_write, }; static const char readme_msg[] = @@ -1870,8 +1927,8 @@ tracing_readme_read(struct file *filp, char __user *ubuf, } static struct file_operations tracing_readme_fops = { - .open = tracing_open_generic, - .read = tracing_readme_read, + .open = tracing_open_generic, + .read = tracing_readme_read, }; static ssize_t @@ -2334,6 +2391,11 @@ static __init void tracer_init_debugfs(void) if (!entry) pr_warning("Could not create debugfs 'iter_ctrl' entry\n"); + entry = debugfs_create_file("tracing_cpumask", 0644, d_tracer, + NULL, &tracing_cpumask_fops); + if (!entry) + pr_warning("Could not create debugfs 'tracing_cpumask' entry\n"); + entry = debugfs_create_file("latency_trace", 0444, d_tracer, &global_trace, &tracing_lt_fops); if (!entry) -- cgit v1.2.3 From 36dfe9252bd4c9b55e8454363fb7e444c92c5030 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:52 +0200 Subject: ftrace: make use of tracing_cpumask Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 95 +++++++++++++++++++++++++++++++++++----------------- 1 file changed, 64 insertions(+), 31 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 18f0ab88ca85..3ae17e254fc3 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -70,23 +70,6 @@ static DECLARE_WAIT_QUEUE_HEAD(trace_wait); unsigned long trace_flags = TRACE_ITER_PRINT_PARENT; -/* - * Only trace on a CPU if the bitmask is set: - */ -static cpumask_t tracing_cpumask __read_mostly = CPU_MASK_ALL; - -/* - * The tracer itself will not take this lock, but still we want - * to provide a consistent cpumask to user-space: - */ -static DEFINE_MUTEX(tracing_cpumask_update_lock); - -/* - * Temporary storage for the character representation of the - * CPU bitmask: - */ -static char mask_str[NR_CPUS]; - void trace_wake_up(void) { /* @@ -1776,19 +1759,46 @@ static struct file_operations show_traces_fops = { .release = seq_release, }; +/* + * Only trace on a CPU if the bitmask is set: + */ +static cpumask_t tracing_cpumask = CPU_MASK_ALL; + +/* + * When tracing/tracing_cpu_mask is modified then this holds + * the new bitmask we are about to install: + */ +static cpumask_t tracing_cpumask_new; + +/* + * The tracer itself will not take this lock, but still we want + * to provide a consistent cpumask to user-space: + */ +static DEFINE_MUTEX(tracing_cpumask_update_lock); + +/* + * Temporary storage for the character representation of the + * CPU bitmask (and one more byte for the newline): + */ +static char mask_str[NR_CPUS + 1]; + static ssize_t tracing_cpumask_read(struct file *filp, char __user *ubuf, size_t count, loff_t *ppos) { - int err; - - count = min(count, (size_t)NR_CPUS); + int len; mutex_lock(&tracing_cpumask_update_lock); - cpumask_scnprintf(mask_str, NR_CPUS, tracing_cpumask); - err = copy_to_user(ubuf, mask_str, count); - if (err) - count = -EFAULT; + + len = cpumask_scnprintf(mask_str, count, tracing_cpumask); + if (count - len < 2) { + count = -EINVAL; + goto out_err; + } + len += sprintf(mask_str + len, "\n"); + count = simple_read_from_buffer(ubuf, count, ppos, mask_str, NR_CPUS+1); + +out_err: mutex_unlock(&tracing_cpumask_update_lock); return count; @@ -1798,16 +1808,40 @@ static ssize_t tracing_cpumask_write(struct file *filp, const char __user *ubuf, size_t count, loff_t *ppos) { - int err; + int err, cpu; mutex_lock(&tracing_cpumask_update_lock); - err = cpumask_parse_user(ubuf, count, tracing_cpumask); - mutex_unlock(&tracing_cpumask_update_lock); - + err = cpumask_parse_user(ubuf, count, tracing_cpumask_new); if (err) - return err; + goto err_unlock; + + spin_lock_irq(&ftrace_max_lock); + for_each_possible_cpu(cpu) { + /* + * Increase/decrease the disabled counter if we are + * about to flip a bit in the cpumask: + */ + if (cpu_isset(cpu, tracing_cpumask) && + !cpu_isset(cpu, tracing_cpumask_new)) { + atomic_inc(&global_trace.data[cpu]->disabled); + } + if (!cpu_isset(cpu, tracing_cpumask) && + cpu_isset(cpu, tracing_cpumask_new)) { + atomic_dec(&global_trace.data[cpu]->disabled); + } + } + spin_unlock_irq(&ftrace_max_lock); + + tracing_cpumask = tracing_cpumask_new; + + mutex_unlock(&tracing_cpumask_update_lock); return count; + +err_unlock: + mutex_unlock(&tracing_cpumask_update_lock); + + return err; } static struct file_operations tracing_cpumask_fops = { @@ -1846,8 +1880,7 @@ tracing_iter_ctrl_read(struct file *filp, char __user *ubuf, r += sprintf(buf + r, "\n"); WARN_ON(r >= len + 2); - r = simple_read_from_buffer(ubuf, cnt, ppos, - buf, r); + r = simple_read_from_buffer(ubuf, cnt, ppos, buf, r); kfree(buf); -- cgit v1.2.3 From d9af56fbd8b37181bffaad060f74aa2e17382874 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:53 +0200 Subject: ftrace: fix cmdline tracing Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_sched_switch.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index 5555b906a666..5a217e863586 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -29,6 +29,8 @@ ctx_switch_func(void *__rq, struct task_struct *prev, struct task_struct *next) if (!tracer_enabled) return; + tracing_record_cmdline(prev); + local_irq_save(flags); cpu = raw_smp_processor_id(); data = tr->data[cpu]; @@ -56,6 +58,8 @@ wakeup_func(void *__rq, struct task_struct *wakee, struct task_struct *curr) if (!tracer_enabled) return; + tracing_record_cmdline(curr); + local_irq_save(flags); cpu = raw_smp_processor_id(); data = tr->data[cpu]; @@ -75,8 +79,6 @@ void ftrace_ctx_switch(void *__rq, struct task_struct *prev, struct task_struct *next) { - tracing_record_cmdline(prev); - /* * If tracer_switch_func only points to the local * switch func, it still needs the ptr passed to it. @@ -93,8 +95,6 @@ void ftrace_wake_up_task(void *__rq, struct task_struct *wakee, struct task_struct *curr) { - tracing_record_cmdline(curr); - wakeup_func(__rq, wakee, curr); /* -- cgit v1.2.3 From 442e544ce52d4415a024920b84fb95c5f9aa0855 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:53 +0200 Subject: ftrace: iter ctrl fix Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 3ae17e254fc3..688b4cf72d99 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1920,6 +1920,11 @@ tracing_iter_ctrl_write(struct file *filp, const char __user *ubuf, break; } } + /* + * If no option could be set, return an error: + */ + if (!trace_options[i]) + return -EINVAL; filp->f_pos += cnt; -- cgit v1.2.3 From f29c73fe3404f8799ed57aaf48859e0b55fc071f Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:53 +0200 Subject: ftrace: include cpu in stacktrace Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 688b4cf72d99..3a4032492fcb 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1227,10 +1227,8 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) abs_usecs % 1000, rel_usecs/1000, rel_usecs % 1000); } else { - if (entry->type != TRACE_STACK) { - lat_print_generic(s, entry, cpu); - lat_print_timestamp(s, abs_usecs, rel_usecs); - } + lat_print_generic(s, entry, cpu); + lat_print_timestamp(s, abs_usecs, rel_usecs); } switch (entry->type) { case TRACE_FN: @@ -1293,17 +1291,15 @@ static int print_trace_fmt(struct trace_iterator *iter) usec_rem = do_div(t, 1000000ULL); secs = (unsigned long)t; - if (entry->type != TRACE_STACK) { - ret = trace_seq_printf(s, "%16s-%-5d ", comm, entry->pid); - if (!ret) - return 0; - ret = trace_seq_printf(s, "[%02d] ", iter->cpu); - if (!ret) - return 0; - ret = trace_seq_printf(s, "%5lu.%06lu: ", secs, usec_rem); - if (!ret) - return 0; - } + ret = trace_seq_printf(s, "%16s-%-5d ", comm, entry->pid); + if (!ret) + return 0; + ret = trace_seq_printf(s, "[%02d] ", iter->cpu); + if (!ret) + return 0; + ret = trace_seq_printf(s, "%5lu.%06lu: ", secs, usec_rem); + if (!ret) + return 0; switch (entry->type) { case TRACE_FN: -- cgit v1.2.3 From 36fc25a9f48deacd8aa08cd2d1c186a4e412604f Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:53 +0200 Subject: ftrace: sched tree fix Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/sched.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 9ca4a2e6a236..3bc7c5362998 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2414,6 +2414,23 @@ static int sched_balance_self(int cpu, int flag) #ifdef CONFIG_CONTEXT_SWITCH_TRACER +void ftrace_task(struct task_struct *p, void *__tr, void *__data) +{ +#if 0 + /* + * trace timeline tree + */ + __trace_special(__tr, __data, + p->pid, p->se.vruntime, p->se.sum_exec_runtime); +#else + /* + * trace balance metrics + */ + __trace_special(__tr, __data, + p->pid, p->se.avg_overlap, 0); +#endif +} + void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data) { struct task_struct *p; @@ -2421,32 +2438,22 @@ void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data) struct rb_node *curr; struct rq *rq = __rq; - curr = first_fair(&rq->cfs); - if (!curr) - return; - if (rq->cfs.curr) { p = task_of(rq->cfs.curr); - __trace_special(__tr, __data, - p->pid, p->se.vruntime, p->se.sum_exec_runtime); + ftrace_task(p, __tr, __data); } if (rq->cfs.next) { p = task_of(rq->cfs.next); - __trace_special(__tr, __data, - p->pid, p->se.vruntime, p->se.sum_exec_runtime); + ftrace_task(p, __tr, __data); } - while (curr) { + for (curr = first_fair(&rq->cfs); curr; curr = rb_next(curr)) { se = rb_entry(curr, struct sched_entity, run_node); if (!entity_is_task(se)) continue; p = task_of(se); - - __trace_special(__tr, __data, - p->pid, p->se.vruntime, p->se.sum_exec_runtime); - - curr = rb_next(curr); + ftrace_task(p, __tr, __data); } } -- cgit v1.2.3 From 88a4216c3ec4281fc7e6725cc3a3ccd01fb1aa14 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:53 +0200 Subject: ftrace: sched special Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/sched.h | 6 ++++++ kernel/sched_fair.c | 3 +++ kernel/trace/trace.c | 6 +++--- kernel/trace/trace_sched_switch.c | 24 ++++++++++++++++++++++++ 4 files changed, 36 insertions(+), 3 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 5b186bed54bc..360ca99033d2 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2138,6 +2138,8 @@ extern void ftrace_wake_up_task(void *rq, struct task_struct *wakee, struct task_struct *curr); extern void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data); +extern void +ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3); #else static inline void ftrace_ctx_switch(void *rq, struct task_struct *prev, struct task_struct *next) @@ -2155,6 +2157,10 @@ ftrace_wake_up_task(void *rq, struct task_struct *wakee, static inline void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data) { } +static inline void +ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) +{ +} #endif extern long sched_setaffinity(pid_t pid, const cpumask_t *new_mask); diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index e24ecd39c4b8..dc1856f10795 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1061,6 +1061,8 @@ wake_affine(struct rq *rq, struct sched_domain *this_sd, struct rq *this_rq, if (!(this_sd->flags & SD_WAKE_AFFINE)) return 0; + ftrace_special(__LINE__, curr->se.avg_overlap, sync); + ftrace_special(__LINE__, p->se.avg_overlap, -1); /* * If the currently running task will sleep within * a reasonable amount of time then attract this newly @@ -1238,6 +1240,7 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p) if (unlikely(se == pse)) return; + ftrace_special(__LINE__, p->pid, se->last_wakeup); cfs_rq_of(pse)->next = pse; /* diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 3a4032492fcb..b87a26414892 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1251,7 +1251,7 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) comm); break; case TRACE_SPECIAL: - trace_seq_printf(s, " %ld %ld %ld\n", + trace_seq_printf(s, "# %ld %ld %ld\n", entry->special.arg1, entry->special.arg2, entry->special.arg3); @@ -1335,7 +1335,7 @@ static int print_trace_fmt(struct trace_iterator *iter) return 0; break; case TRACE_SPECIAL: - ret = trace_seq_printf(s, " %ld %ld %ld\n", + ret = trace_seq_printf(s, "# %ld %ld %ld\n", entry->special.arg1, entry->special.arg2, entry->special.arg3); @@ -1400,7 +1400,7 @@ static int print_raw_fmt(struct trace_iterator *iter) break; case TRACE_SPECIAL: case TRACE_STACK: - ret = trace_seq_printf(s, " %ld %ld %ld\n", + ret = trace_seq_printf(s, "# %ld %ld %ld\n", entry->special.arg1, entry->special.arg2, entry->special.arg3); diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index 5a217e863586..bddf676914ed 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -103,6 +103,30 @@ ftrace_wake_up_task(void *__rq, struct task_struct *wakee, wakeup_sched_wakeup(wakee, curr); } +void +ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) +{ + struct trace_array *tr = ctx_trace; + struct trace_array_cpu *data; + unsigned long flags; + long disabled; + int cpu; + + if (!tracer_enabled) + return; + + local_irq_save(flags); + cpu = raw_smp_processor_id(); + data = tr->data[cpu]; + disabled = atomic_inc_return(&data->disabled); + + if (likely(disabled == 1)) + __trace_special(tr, data, arg1, arg2, arg3); + + atomic_dec(&data->disabled); + local_irq_restore(flags); +} + static void sched_switch_reset(struct trace_array *tr) { int cpu; -- cgit v1.2.3 From bac524d3f3dfeffa3a9d44f2c64035b88bcaacb4 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 12 May 2008 21:20:53 +0200 Subject: ftrace: trace next state Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 35 +++++++++++++++++++++++++---------- kernel/trace/trace.h | 1 + 2 files changed, 26 insertions(+), 10 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b87a26414892..b63fe909f87b 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -736,6 +736,7 @@ tracing_sched_switch_trace(struct trace_array *tr, entry->ctx.prev_state = prev->state; entry->ctx.next_pid = next->pid; entry->ctx.next_prio = next->prio; + entry->ctx.next_state = next->state; __trace_stack(tr, data, flags, 4); spin_unlock_irqrestore(&data->lock, irq_flags); } @@ -759,6 +760,7 @@ tracing_sched_wakeup_trace(struct trace_array *tr, entry->ctx.prev_state = curr->state; entry->ctx.next_pid = wakee->pid; entry->ctx.next_prio = wakee->prio; + entry->ctx.next_state = wakee->state; __trace_stack(tr, data, flags, 5); spin_unlock_irqrestore(&data->lock, irq_flags); @@ -1207,7 +1209,7 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) unsigned long abs_usecs; unsigned long rel_usecs; char *comm; - int S; + int S, T; int i; if (!next_entry) @@ -1241,14 +1243,17 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) case TRACE_WAKE: S = entry->ctx.prev_state < sizeof(state_to_char) ? state_to_char[entry->ctx.prev_state] : 'X'; + T = entry->ctx.next_state < sizeof(state_to_char) ? + state_to_char[entry->ctx.next_state] : 'X'; + comm = trace_find_cmdline(entry->ctx.next_pid); - trace_seq_printf(s, " %5d:%3d:%c %s %5d:%3d %s\n", + trace_seq_printf(s, " %5d:%3d:%c %s %5d:%3d:%c %s\n", entry->ctx.prev_pid, entry->ctx.prev_prio, S, entry->type == TRACE_CTX ? "==>" : " +", entry->ctx.next_pid, entry->ctx.next_prio, - comm); + T, comm); break; case TRACE_SPECIAL: trace_seq_printf(s, "# %ld %ld %ld\n", @@ -1280,7 +1285,7 @@ static int print_trace_fmt(struct trace_iterator *iter) unsigned long secs; char *comm; int ret; - int S; + int S, T; int i; entry = iter->ent; @@ -1324,13 +1329,16 @@ static int print_trace_fmt(struct trace_iterator *iter) case TRACE_WAKE: S = entry->ctx.prev_state < sizeof(state_to_char) ? state_to_char[entry->ctx.prev_state] : 'X'; - ret = trace_seq_printf(s, " %5d:%3d:%c %s %5d:%3d\n", + T = entry->ctx.next_state < sizeof(state_to_char) ? + state_to_char[entry->ctx.next_state] : 'X'; + ret = trace_seq_printf(s, " %5d:%3d:%c %s %5d:%3d:%c\n", entry->ctx.prev_pid, entry->ctx.prev_prio, S, entry->type == TRACE_CTX ? "==>" : " +", entry->ctx.next_pid, - entry->ctx.next_prio); + entry->ctx.next_prio, + T); if (!ret) return 0; break; @@ -1367,7 +1375,7 @@ static int print_raw_fmt(struct trace_iterator *iter) struct trace_seq *s = &iter->seq; struct trace_entry *entry; int ret; - int S; + int S, T; entry = iter->ent; @@ -1387,14 +1395,17 @@ static int print_raw_fmt(struct trace_iterator *iter) case TRACE_WAKE: S = entry->ctx.prev_state < sizeof(state_to_char) ? state_to_char[entry->ctx.prev_state] : 'X'; + T = entry->ctx.next_state < sizeof(state_to_char) ? + state_to_char[entry->ctx.next_state] : 'X'; if (entry->type == TRACE_WAKE) S = '+'; - ret = trace_seq_printf(s, "%d %d %c %d %d\n", + ret = trace_seq_printf(s, "%d %d %c %d %d %c\n", entry->ctx.prev_pid, entry->ctx.prev_prio, S, entry->ctx.next_pid, - entry->ctx.next_prio); + entry->ctx.next_prio, + T); if (!ret) return 0; break; @@ -1428,7 +1439,7 @@ static int print_hex_fmt(struct trace_iterator *iter) struct trace_seq *s = &iter->seq; unsigned char newline = '\n'; struct trace_entry *entry; - int S; + int S, T; entry = iter->ent; @@ -1445,6 +1456,8 @@ static int print_hex_fmt(struct trace_iterator *iter) case TRACE_WAKE: S = entry->ctx.prev_state < sizeof(state_to_char) ? state_to_char[entry->ctx.prev_state] : 'X'; + T = entry->ctx.next_state < sizeof(state_to_char) ? + state_to_char[entry->ctx.next_state] : 'X'; if (entry->type == TRACE_WAKE) S = '+'; SEQ_PUT_HEX_FIELD_RET(s, entry->ctx.prev_pid); @@ -1453,6 +1466,7 @@ static int print_hex_fmt(struct trace_iterator *iter) SEQ_PUT_HEX_FIELD_RET(s, entry->ctx.next_pid); SEQ_PUT_HEX_FIELD_RET(s, entry->ctx.next_prio); SEQ_PUT_HEX_FIELD_RET(s, entry->fn.parent_ip); + SEQ_PUT_HEX_FIELD_RET(s, T); break; case TRACE_SPECIAL: case TRACE_STACK: @@ -1488,6 +1502,7 @@ static int print_bin_fmt(struct trace_iterator *iter) SEQ_PUT_FIELD_RET(s, entry->ctx.prev_state); SEQ_PUT_FIELD_RET(s, entry->ctx.next_pid); SEQ_PUT_FIELD_RET(s, entry->ctx.next_prio); + SEQ_PUT_FIELD_RET(s, entry->ctx.next_state); break; case TRACE_SPECIAL: case TRACE_STACK: diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index a52015702a28..96951a8d09a4 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -23,6 +23,7 @@ struct ctx_switch_entry { unsigned char prev_state; unsigned int next_pid; unsigned char next_prio; + unsigned char next_state; }; /* -- cgit v1.2.3 From 5429db2d26a59903c81a4f6c6dae7eb9daaea5fc Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 12 May 2008 21:20:53 +0200 Subject: ftrace: fix wakeup callback Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 3bc7c5362998..1ec3fb2efee6 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2533,7 +2533,6 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync) out_activate: #endif /* CONFIG_SMP */ - ftrace_wake_up_task(rq, p, rq->curr); schedstat_inc(p, se.nr_wakeups); if (sync) schedstat_inc(p, se.nr_wakeups_sync); @@ -2548,6 +2547,7 @@ out_activate: success = 1; out_running: + ftrace_wake_up_task(rq, p, rq->curr); check_preempt_curr(rq, p); p->state = TASK_RUNNING; -- cgit v1.2.3 From 694379e9ed4f2f6babe111bf001c69e2e263338b Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:54 +0200 Subject: ftrace: make it more available in the Kconfig Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/Kconfig | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index eb1988ed84b7..ebc158e6d59a 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -14,7 +14,7 @@ config TRACING config FTRACE bool "Kernel Function Tracer" - depends on DEBUG_KERNEL && HAVE_FTRACE + depends on HAVE_FTRACE select FRAME_POINTER select TRACING select CONTEXT_SWITCH_TRACER @@ -72,7 +72,6 @@ config PREEMPT_TRACER config SCHED_TRACER bool "Scheduling Latency Tracer" - depends on DEBUG_KERNEL select TRACING select CONTEXT_SWITCH_TRACER select TRACER_MAX_TRACE @@ -82,7 +81,6 @@ config SCHED_TRACER config CONTEXT_SWITCH_TRACER bool "Trace process context switches" - depends on DEBUG_KERNEL select TRACING select MARKERS help -- cgit v1.2.3 From 8f96da02c14d722ad9a3713cd7273ce28c9036ad Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:54 +0200 Subject: ftrace: remove wakeup from function trace trace_function is called by mcount and calling wake_up from that can have unpredictable results. This patch removes the wakeup from trace_function. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b63fe909f87b..736dcfb3ed01 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -659,8 +659,6 @@ trace_function(struct trace_array *tr, struct trace_array_cpu *data, entry->fn.ip = ip; entry->fn.parent_ip = parent_ip; spin_unlock_irqrestore(&data->lock, irq_flags); - - trace_wake_up(); } void -- cgit v1.2.3 From 4fe8c3048cd8280a54256bca9cac2007bd546c33 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:54 +0200 Subject: ftrace: printk and trace irqsoff and wakeups printk called from wakeup critical timings and irqs off can cause deadlocks since printk might do a wakeup itself. If the call to printk happens with the runqueue lock held, it can deadlock. This patch protects the printk from being called in trace irqs off with a test to see if the runqueue for the current CPU is locked. If it is locked, the printk is skipped. The wakeup always holds the runqueue lock, so the printk is simply removed. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_irqsoff.c | 26 ++++++++++++++------------ kernel/trace/trace_sched_wakeup.c | 13 ------------- 2 files changed, 14 insertions(+), 25 deletions(-) diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index 7a4dc014b8ab..d0c1748b1e2c 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -165,18 +165,20 @@ check_critical_timing(struct trace_array *tr, update_max_tr_single(tr, current, cpu); - if (tracing_thresh) { - printk(KERN_INFO "(%16s-%-5d|#%d):" - " %lu us critical section violates %lu us threshold.\n", - current->comm, current->pid, - raw_smp_processor_id(), - latency, nsecs_to_usecs(tracing_thresh)); - } else { - printk(KERN_INFO "(%16s-%-5d|#%d):" - " new %lu us maximum-latency critical section.\n", - current->comm, current->pid, - raw_smp_processor_id(), - latency); + if (!runqueue_is_locked()) { + if (tracing_thresh) { + printk(KERN_INFO "(%16s-%-5d|#%d): %lu us critical" + " section violates %lu us threshold.\n", + current->comm, current->pid, + raw_smp_processor_id(), + latency, nsecs_to_usecs(tracing_thresh)); + } else { + printk(KERN_INFO "(%16s-%-5d|#%d): new %lu us" + " maximum-latency critical section.\n", + current->comm, current->pid, + raw_smp_processor_id(), + latency); + } } max_sequence++; diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 2a012423f9d0..5948011006bc 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -106,19 +106,6 @@ wakeup_sched_switch(struct task_struct *prev, struct task_struct *next) update_max_tr(tr, wakeup_task, wakeup_cpu); - if (tracing_thresh) { - printk(KERN_INFO "(%16s-%-5d|#%d):" - " %lu us wakeup latency violates %lu us threshold.\n", - wakeup_task->comm, wakeup_task->pid, - raw_smp_processor_id(), - latency, nsecs_to_usecs(tracing_thresh)); - } else { - printk(KERN_INFO "(%16s-%-5d|#%d):" - " new %lu us maximum wakeup latency.\n", - wakeup_task->comm, wakeup_task->pid, - cpu, latency); - } - out_unlock: __wakeup_reset(tr); spin_unlock_irqrestore(&wakeup_lock, flags); -- cgit v1.2.3 From 06fa75ab566c50e01bfd7b055bde85cf9b1bc98a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:54 +0200 Subject: ftrace: add TRACE_STACK and TRACE_SPECIAL to selftest validation The selftest validation code checks for valid entries in the trace buffer. TRACE_STACK and TRACE_SPECIAL have been added to the code but not to the validator. This patch adds the two to prevent them from flagging a failure in the selftest. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_selftest.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index 39dd452647da..92f4acb7740c 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -9,6 +9,8 @@ static inline int trace_valid_entry(struct trace_entry *entry) case TRACE_FN: case TRACE_CTX: case TRACE_WAKE: + case TRACE_STACK: + case TRACE_SPECIAL: return 1; } return 0; @@ -180,7 +182,7 @@ int trace_selftest_startup_dynamic_tracing(struct tracer *trace, /* we should only have one item */ if (!ret && count != 1) { - printk(KERN_CONT ".. filter failed .."); + printk(KERN_CONT ".. filter failed count=%ld ..", count); ret = -1; goto out; } -- cgit v1.2.3 From d05cdb25d80f06f77aa6bddb53cd1390d4d91a0b Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:54 +0200 Subject: ftrace: fix dynamic ftrace selftest With the adding of the configuration changes in the Makefile to prevent tracing of functions in the ftrace code, all tracing of all the ftrace code has been removed. Unfortunately, one of the selftests, relied on a function to be traced. With the new change, the function was no longer traced and the test failed. This patch separates out the test function into its own file so that we can add the "-pg" flag to the compilation of that function and the adding of the mcount call to that function. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/Makefile | 4 ++++ kernel/trace/trace.h | 2 ++ kernel/trace/trace_selftest.c | 6 ------ kernel/trace/trace_selftest_dynamic.c | 7 +++++++ 4 files changed, 13 insertions(+), 6 deletions(-) create mode 100644 kernel/trace/trace_selftest_dynamic.c diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index c25a6cd6a529..d9efbbfa2bdf 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -4,6 +4,10 @@ ifdef CONFIG_FTRACE ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS)) + +# selftest needs instrumentation +CFLAGS_trace_selftest_dynamic.o = -pg +obj-y += trace_selftest_dynamic.o endif obj-$(CONFIG_FTRACE) += libftrace.o diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 96951a8d09a4..98cbfd05d754 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -244,6 +244,8 @@ extern int unregister_tracer_switch(struct tracer_switch_ops *ops); #ifdef CONFIG_DYNAMIC_FTRACE extern unsigned long ftrace_update_tot_cnt; +#define DYN_FTRACE_TEST_NAME trace_selftest_dynamic_test_func +extern int DYN_FTRACE_TEST_NAME(void); #endif #ifdef CONFIG_FTRACE_STARTUP_TEST diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index 92f4acb7740c..83e55a2000cc 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -107,14 +107,8 @@ static int trace_test_buffer(struct trace_array *tr, unsigned long *count) #ifdef CONFIG_DYNAMIC_FTRACE -#define DYN_FTRACE_TEST_NAME trace_selftest_dynamic_test_func #define __STR(x) #x #define STR(x) __STR(x) -static int DYN_FTRACE_TEST_NAME(void) -{ - /* used to call mcount */ - return 0; -} /* Test dynamic code modification and ftrace filters */ int trace_selftest_startup_dynamic_tracing(struct tracer *trace, diff --git a/kernel/trace/trace_selftest_dynamic.c b/kernel/trace/trace_selftest_dynamic.c new file mode 100644 index 000000000000..54dd77cce5bf --- /dev/null +++ b/kernel/trace/trace_selftest_dynamic.c @@ -0,0 +1,7 @@ +#include "trace.h" + +int DYN_FTRACE_TEST_NAME(void) +{ + /* used to call mcount */ + return 0; +} -- cgit v1.2.3 From 4d9493c90f8e6e1b164aede3814010a290161abb Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:54 +0200 Subject: ftrace: remove add-hoc code Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/sched.c | 47 --------------------------------------- kernel/sched_fair.c | 3 --- kernel/trace/trace_sched_switch.c | 10 ++------- 3 files changed, 2 insertions(+), 58 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 1ec3fb2efee6..ad95cca4e42e 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2412,53 +2412,6 @@ static int sched_balance_self(int cpu, int flag) #endif /* CONFIG_SMP */ -#ifdef CONFIG_CONTEXT_SWITCH_TRACER - -void ftrace_task(struct task_struct *p, void *__tr, void *__data) -{ -#if 0 - /* - * trace timeline tree - */ - __trace_special(__tr, __data, - p->pid, p->se.vruntime, p->se.sum_exec_runtime); -#else - /* - * trace balance metrics - */ - __trace_special(__tr, __data, - p->pid, p->se.avg_overlap, 0); -#endif -} - -void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data) -{ - struct task_struct *p; - struct sched_entity *se; - struct rb_node *curr; - struct rq *rq = __rq; - - if (rq->cfs.curr) { - p = task_of(rq->cfs.curr); - ftrace_task(p, __tr, __data); - } - if (rq->cfs.next) { - p = task_of(rq->cfs.next); - ftrace_task(p, __tr, __data); - } - - for (curr = first_fair(&rq->cfs); curr; curr = rb_next(curr)) { - se = rb_entry(curr, struct sched_entity, run_node); - if (!entity_is_task(se)) - continue; - - p = task_of(se); - ftrace_task(p, __tr, __data); - } -} - -#endif - /*** * try_to_wake_up - wake up a thread * @p: the to-be-woken-up thread diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index dc1856f10795..e24ecd39c4b8 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1061,8 +1061,6 @@ wake_affine(struct rq *rq, struct sched_domain *this_sd, struct rq *this_rq, if (!(this_sd->flags & SD_WAKE_AFFINE)) return 0; - ftrace_special(__LINE__, curr->se.avg_overlap, sync); - ftrace_special(__LINE__, p->se.avg_overlap, -1); /* * If the currently running task will sleep within * a reasonable amount of time then attract this newly @@ -1240,7 +1238,6 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p) if (unlikely(se == pse)) return; - ftrace_special(__LINE__, p->pid, se->last_wakeup); cfs_rq_of(pse)->next = pse; /* diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index bddf676914ed..5671db0e1827 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -36,11 +36,8 @@ ctx_switch_func(void *__rq, struct task_struct *prev, struct task_struct *next) data = tr->data[cpu]; disabled = atomic_inc_return(&data->disabled); - if (likely(disabled == 1)) { + if (likely(disabled == 1)) tracing_sched_switch_trace(tr, data, prev, next, flags); - if (trace_flags & TRACE_ITER_SCHED_TREE) - ftrace_all_fair_tasks(__rq, tr, data); - } atomic_dec(&data->disabled); local_irq_restore(flags); @@ -65,11 +62,8 @@ wakeup_func(void *__rq, struct task_struct *wakee, struct task_struct *curr) data = tr->data[cpu]; disabled = atomic_inc_return(&data->disabled); - if (likely(disabled == 1)) { + if (likely(disabled == 1)) tracing_sched_wakeup_trace(tr, data, wakee, curr, flags); - if (trace_flags & TRACE_ITER_SCHED_TREE) - ftrace_all_fair_tasks(__rq, tr, data); - } atomic_dec(&data->disabled); local_irq_restore(flags); -- cgit v1.2.3 From c5f888cae49dfe3e86d9d1e0dab2b63ceb057be3 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:55 +0200 Subject: ftrace: irqsoff use raw_smp_processor_id This patch changes the use of __get_cpu_var to explicitly calling raw_smp_processor_id and using the per_cpu() macro. On some debug configurations, the use of __get_cpu_var may cause ftrace to trigger and this can cause problems with the irqsoff tracing. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_irqsoff.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index d0c1748b1e2c..761f3ec66c50 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -204,14 +204,14 @@ start_critical_timing(unsigned long ip, unsigned long parent_ip) if (likely(!tracer_enabled)) return; - if (__get_cpu_var(tracing_cpu)) + cpu = raw_smp_processor_id(); + + if (per_cpu(tracing_cpu, cpu)) return; - cpu = raw_smp_processor_id(); data = tr->data[cpu]; - if (unlikely(!data) || unlikely(!head_page(data)) || - atomic_read(&data->disabled)) + if (unlikely(!data) || atomic_read(&data->disabled)) return; atomic_inc(&data->disabled); @@ -225,7 +225,7 @@ start_critical_timing(unsigned long ip, unsigned long parent_ip) trace_function(tr, data, ip, parent_ip, flags); - __get_cpu_var(tracing_cpu) = 1; + per_cpu(tracing_cpu, cpu) = 1; atomic_dec(&data->disabled); } @@ -238,16 +238,16 @@ stop_critical_timing(unsigned long ip, unsigned long parent_ip) struct trace_array_cpu *data; unsigned long flags; + cpu = raw_smp_processor_id(); /* Always clear the tracing cpu on stopping the trace */ - if (unlikely(__get_cpu_var(tracing_cpu))) - __get_cpu_var(tracing_cpu) = 0; + if (unlikely(per_cpu(tracing_cpu, cpu))) + per_cpu(tracing_cpu, cpu) = 0; else return; if (!tracer_enabled) return; - cpu = raw_smp_processor_id(); data = tr->data[cpu]; if (unlikely(!data) || unlikely(!head_page(data)) || @@ -255,6 +255,7 @@ stop_critical_timing(unsigned long ip, unsigned long parent_ip) return; atomic_inc(&data->disabled); + local_save_flags(flags); trace_function(tr, data, ip, parent_ip, flags); check_critical_timing(tr, data, parent_ip ? : ip, cpu); @@ -376,7 +377,7 @@ static void stop_irqsoff_tracer(struct trace_array *tr) static void __irqsoff_tracer_init(struct trace_array *tr) { irqsoff_trace = tr; - /* make sure that the tracer is visibel */ + /* make sure that the tracer is visible */ smp_wmb(); if (tr->ctrl) -- cgit v1.2.3 From 92205c2343527a863d660360599a4bf8cede77b0 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:55 +0200 Subject: ftrace: user raw_spin_lock in tracing Lock debugging enabled cause huge performance problems for tracing. Having the lock verification happening for every function that is called because mcount calls spin_lock can cripple the system. This patch converts the spin_locks used by ftrace into raw_spin_locks. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 51 ++++++++++++++++++++++++++++++--------------------- kernel/trace/trace.h | 2 +- 2 files changed, 31 insertions(+), 22 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 736dcfb3ed01..3009aafa4dde 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -133,7 +133,8 @@ static const char *trace_options[] = { NULL }; -static DEFINE_SPINLOCK(ftrace_max_lock); +static raw_spinlock_t ftrace_max_lock = + (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED; /* * Copy the new maximum trace into the separate maximum-trace @@ -335,7 +336,7 @@ update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) int i; WARN_ON_ONCE(!irqs_disabled()); - spin_lock(&ftrace_max_lock); + __raw_spin_lock(&ftrace_max_lock); /* clear out all the previous traces */ for_each_possible_cpu(i) { data = tr->data[i]; @@ -344,7 +345,7 @@ update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) } __update_max_tr(tr, tsk, cpu); - spin_unlock(&ftrace_max_lock); + __raw_spin_unlock(&ftrace_max_lock); } /** @@ -360,7 +361,7 @@ update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu) int i; WARN_ON_ONCE(!irqs_disabled()); - spin_lock(&ftrace_max_lock); + __raw_spin_lock(&ftrace_max_lock); for_each_possible_cpu(i) tracing_reset(max_tr.data[i]); @@ -368,7 +369,7 @@ update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu) tracing_reset(data); __update_max_tr(tr, tsk, cpu); - spin_unlock(&ftrace_max_lock); + __raw_spin_unlock(&ftrace_max_lock); } int register_tracer(struct tracer *type) @@ -652,13 +653,15 @@ trace_function(struct trace_array *tr, struct trace_array_cpu *data, struct trace_entry *entry; unsigned long irq_flags; - spin_lock_irqsave(&data->lock, irq_flags); + raw_local_irq_save(irq_flags); + __raw_spin_lock(&data->lock); entry = tracing_get_trace_entry(tr, data); tracing_generic_entry_update(entry, flags); entry->type = TRACE_FN; entry->fn.ip = ip; entry->fn.parent_ip = parent_ip; - spin_unlock_irqrestore(&data->lock, irq_flags); + __raw_spin_unlock(&data->lock); + raw_local_irq_restore(irq_flags); } void @@ -678,14 +681,16 @@ __trace_special(void *__tr, void *__data, struct trace_entry *entry; unsigned long irq_flags; - spin_lock_irqsave(&data->lock, irq_flags); + raw_local_irq_save(irq_flags); + __raw_spin_lock(&data->lock); entry = tracing_get_trace_entry(tr, data); tracing_generic_entry_update(entry, 0); entry->type = TRACE_SPECIAL; entry->special.arg1 = arg1; entry->special.arg2 = arg2; entry->special.arg3 = arg3; - spin_unlock_irqrestore(&data->lock, irq_flags); + __raw_spin_unlock(&data->lock); + raw_local_irq_restore(irq_flags); trace_wake_up(); } @@ -725,7 +730,8 @@ tracing_sched_switch_trace(struct trace_array *tr, struct trace_entry *entry; unsigned long irq_flags; - spin_lock_irqsave(&data->lock, irq_flags); + raw_local_irq_save(irq_flags); + __raw_spin_lock(&data->lock); entry = tracing_get_trace_entry(tr, data); tracing_generic_entry_update(entry, flags); entry->type = TRACE_CTX; @@ -736,7 +742,8 @@ tracing_sched_switch_trace(struct trace_array *tr, entry->ctx.next_prio = next->prio; entry->ctx.next_state = next->state; __trace_stack(tr, data, flags, 4); - spin_unlock_irqrestore(&data->lock, irq_flags); + __raw_spin_unlock(&data->lock); + raw_local_irq_restore(irq_flags); } void @@ -749,7 +756,8 @@ tracing_sched_wakeup_trace(struct trace_array *tr, struct trace_entry *entry; unsigned long irq_flags; - spin_lock_irqsave(&data->lock, irq_flags); + raw_local_irq_save(irq_flags); + __raw_spin_lock(&data->lock); entry = tracing_get_trace_entry(tr, data); tracing_generic_entry_update(entry, flags); entry->type = TRACE_WAKE; @@ -760,7 +768,8 @@ tracing_sched_wakeup_trace(struct trace_array *tr, entry->ctx.next_prio = wakee->prio; entry->ctx.next_state = wakee->state; __trace_stack(tr, data, flags, 5); - spin_unlock_irqrestore(&data->lock, irq_flags); + __raw_spin_unlock(&data->lock); + raw_local_irq_restore(irq_flags); trace_wake_up(); } @@ -1824,7 +1833,8 @@ tracing_cpumask_write(struct file *filp, const char __user *ubuf, if (err) goto err_unlock; - spin_lock_irq(&ftrace_max_lock); + raw_local_irq_disable(); + __raw_spin_lock(&ftrace_max_lock); for_each_possible_cpu(cpu) { /* * Increase/decrease the disabled counter if we are @@ -1839,7 +1849,8 @@ tracing_cpumask_write(struct file *filp, const char __user *ubuf, atomic_dec(&global_trace.data[cpu]->disabled); } } - spin_unlock_irq(&ftrace_max_lock); + __raw_spin_unlock(&ftrace_max_lock); + raw_local_irq_enable(); tracing_cpumask = tracing_cpumask_new; @@ -2299,7 +2310,7 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, for_each_cpu_mask(cpu, mask) { data = iter->tr->data[cpu]; - spin_lock(&data->lock); + __raw_spin_lock(&data->lock); } while (find_next_entry_inc(iter) != NULL) { @@ -2320,7 +2331,7 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, for_each_cpu_mask(cpu, mask) { data = iter->tr->data[cpu]; - spin_unlock(&data->lock); + __raw_spin_unlock(&data->lock); } for_each_cpu_mask(cpu, mask) { @@ -2538,8 +2549,7 @@ static int trace_alloc_page(void) /* Now that we successfully allocate a page per CPU, add them */ for_each_possible_cpu(i) { data = global_trace.data[i]; - spin_lock_init(&data->lock); - lockdep_set_class(&data->lock, &data->lock_key); + data->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED; page = list_entry(pages.next, struct page, lru); list_del_init(&page->lru); list_add_tail(&page->lru, &data->trace_pages); @@ -2547,8 +2557,7 @@ static int trace_alloc_page(void) #ifdef CONFIG_TRACER_MAX_TRACE data = max_tr.data[i]; - spin_lock_init(&data->lock); - lockdep_set_class(&data->lock, &data->lock_key); + data->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED; page = list_entry(pages.next, struct page, lru); list_del_init(&page->lru); list_add_tail(&page->lru, &data->trace_pages); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 98cbfd05d754..25cba28eb9ba 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -76,7 +76,7 @@ struct trace_entry { struct trace_array_cpu { struct list_head trace_pages; atomic_t disabled; - spinlock_t lock; + raw_spinlock_t lock; struct lock_class_key lock_key; /* these fields get copied into max-trace: */ -- cgit v1.2.3 From 9d0a420b737f72d84fabebf29634d800cbf54538 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:55 +0200 Subject: ftrace: remove function tracing from spinlock debug The debug functions in spin_lock debugging pollute the output of the function tracer. This patch adds the debug files in the lib director to those that should not be compiled with mcount tracing. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- lib/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/lib/Makefile b/lib/Makefile index 6ca9e6ee1e33..d97ad1100b6f 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -10,8 +10,9 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \ ifdef CONFIG_FTRACE # Do not profile string.o, since it may be used in early boot or vdso +# Also do not profile any debug utilities ORIG_CFLAGS := $(KBUILD_CFLAGS) -KBUILD_CFLAGS = $(if $(subst string,,$(basename $(notdir $@))), \ +KBUILD_CFLAGS = $(if $(filter-out %debug debug% string%,$(basename $(notdir $@))), \ $(ORIG_CFLAGS), \ $(subst -pg,,$(ORIG_CFLAGS))) endif -- cgit v1.2.3 From 1d09daa55d2e9bab7e7d30f0d05e5a7bc60b2a4a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:55 +0200 Subject: ftrace: use Makefile to remove tracing from lockdep This patch removes the "notrace" annotation from lockdep and adds the debugging files in the kernel director to those that should not be compiled with "-pg" mcount tracing. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/Makefile | 8 ++++++++ kernel/lockdep.c | 26 +++++++++++++------------- 2 files changed, 21 insertions(+), 13 deletions(-) diff --git a/kernel/Makefile b/kernel/Makefile index 7e344e7b0cb3..d2f80ea4cd9a 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -11,6 +11,14 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o profile.o \ hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o +ifdef CONFIG_FTRACE +# Do not profile debug utilities +ORIG_CFLAGS := $(KBUILD_CFLAGS) +KBUILD_CFLAGS = $(if $(filter-out lockdep% %debug,$(basename $(notdir $@))), \ + $(ORIG_CFLAGS), \ + $(subst -pg,,$(ORIG_CFLAGS))) +endif + obj-$(CONFIG_SYSCTL_SYSCALL_CHECK) += sysctl_check.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-y += time/ diff --git a/kernel/lockdep.c b/kernel/lockdep.c index ac46847ba0c9..90a440cbd6de 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -271,14 +271,14 @@ static struct list_head chainhash_table[CHAINHASH_SIZE]; ((key1) >> (64-MAX_LOCKDEP_KEYS_BITS)) ^ \ (key2)) -notrace void lockdep_off(void) +void lockdep_off(void) { current->lockdep_recursion++; } EXPORT_SYMBOL(lockdep_off); -notrace void lockdep_on(void) +void lockdep_on(void) { current->lockdep_recursion--; } @@ -1041,7 +1041,7 @@ find_usage_forwards(struct lock_class *source, unsigned int depth) * Return 1 otherwise and keep unchanged. * Return 0 on error. */ -static noinline notrace int +static noinline int find_usage_backwards(struct lock_class *source, unsigned int depth) { struct lock_list *entry; @@ -1591,7 +1591,7 @@ static inline int validate_chain(struct task_struct *curr, * We are building curr_chain_key incrementally, so double-check * it from scratch, to make sure that it's done correctly: */ -static notrace void check_chain_key(struct task_struct *curr) +static void check_chain_key(struct task_struct *curr) { #ifdef CONFIG_DEBUG_LOCKDEP struct held_lock *hlock, *prev_hlock = NULL; @@ -1967,7 +1967,7 @@ static int mark_lock_irq(struct task_struct *curr, struct held_lock *this, /* * Mark all held locks with a usage bit: */ -static notrace int +static int mark_held_locks(struct task_struct *curr, int hardirq) { enum lock_usage_bit usage_bit; @@ -2014,7 +2014,7 @@ void early_boot_irqs_on(void) /* * Hardirqs will be enabled: */ -void notrace trace_hardirqs_on_caller(unsigned long a0) +void trace_hardirqs_on_caller(unsigned long a0) { struct task_struct *curr = current; unsigned long ip; @@ -2060,7 +2060,7 @@ void notrace trace_hardirqs_on_caller(unsigned long a0) } EXPORT_SYMBOL(trace_hardirqs_on_caller); -void notrace trace_hardirqs_on(void) +void trace_hardirqs_on(void) { trace_hardirqs_on_caller(CALLER_ADDR0); } @@ -2069,7 +2069,7 @@ EXPORT_SYMBOL(trace_hardirqs_on); /* * Hardirqs were disabled: */ -void notrace trace_hardirqs_off_caller(unsigned long a0) +void trace_hardirqs_off_caller(unsigned long a0) { struct task_struct *curr = current; @@ -2094,7 +2094,7 @@ void notrace trace_hardirqs_off_caller(unsigned long a0) } EXPORT_SYMBOL(trace_hardirqs_off_caller); -void notrace trace_hardirqs_off(void) +void trace_hardirqs_off(void) { trace_hardirqs_off_caller(CALLER_ADDR0); } @@ -2260,7 +2260,7 @@ static inline int separate_irq_context(struct task_struct *curr, /* * Mark a lock with a usage bit, and validate the state transition: */ -static notrace int mark_lock(struct task_struct *curr, struct held_lock *this, +static int mark_lock(struct task_struct *curr, struct held_lock *this, enum lock_usage_bit new_bit) { unsigned int new_mask = 1 << new_bit, ret = 1; @@ -2663,7 +2663,7 @@ __lock_release(struct lockdep_map *lock, int nested, unsigned long ip) /* * Check whether we follow the irq-flags state precisely: */ -static notrace void check_flags(unsigned long flags) +static void check_flags(unsigned long flags) { #if defined(CONFIG_DEBUG_LOCKDEP) && defined(CONFIG_TRACE_IRQFLAGS) if (!debug_locks) @@ -2700,7 +2700,7 @@ static notrace void check_flags(unsigned long flags) * We are not always called with irqs disabled - do that here, * and also avoid lockdep recursion: */ -notrace void lock_acquire(struct lockdep_map *lock, unsigned int subclass, +void lock_acquire(struct lockdep_map *lock, unsigned int subclass, int trylock, int read, int check, unsigned long ip) { unsigned long flags; @@ -2723,7 +2723,7 @@ notrace void lock_acquire(struct lockdep_map *lock, unsigned int subclass, EXPORT_SYMBOL_GPL(lock_acquire); -notrace void lock_release(struct lockdep_map *lock, int nested, +void lock_release(struct lockdep_map *lock, int nested, unsigned long ip) { unsigned long flags; -- cgit v1.2.3 From c1d2327b36f2261ffa8ff7227321ba900c7eee7f Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:55 +0200 Subject: ftrace: restrict tracing to HAVE_FTRACE architectures Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index ebc158e6d59a..f3005717bcd0 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -32,6 +32,7 @@ config IRQSOFF_TRACER default n depends on TRACE_IRQFLAGS_SUPPORT depends on GENERIC_TIME + depends on HAVE_FTRACE select TRACE_IRQFLAGS select TRACING select TRACER_MAX_TRACE @@ -54,6 +55,7 @@ config PREEMPT_TRACER default n depends on GENERIC_TIME depends on PREEMPT + depends on HAVE_FTRACE select TRACING select TRACER_MAX_TRACE help @@ -72,6 +74,7 @@ config PREEMPT_TRACER config SCHED_TRACER bool "Scheduling Latency Tracer" + depends on HAVE_FTRACE select TRACING select CONTEXT_SWITCH_TRACER select TRACER_MAX_TRACE @@ -81,6 +84,7 @@ config SCHED_TRACER config CONTEXT_SWITCH_TRACER bool "Trace process context switches" + depends on HAVE_FTRACE select TRACING select MARKERS help -- cgit v1.2.3 From 07a267cdd2fd7d1de9455b1e36a1635ace7276c7 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:55 +0200 Subject: ftrace: add UNINTERRUPTIBLE state for kftraced on disable When dynamic ftrace fails and sets itself disabled, the ftraced daemon will go back to sleep everytime it wakes up. The setting of the ftraced state to UNINTERRUPTIBLE is skipped in this process, and the daemon takes up 100% of the CPU. This patch makes sure the ftraced daemon sets itself to UNINTERRUPTIBLE in that loop. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/ftrace.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 281d97a3208c..40f64f7cd850 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -630,10 +630,10 @@ static int ftraced(void *ignore) { unsigned long usecs; - set_current_state(TASK_INTERRUPTIBLE); - while (!kthread_should_stop()) { + set_current_state(TASK_INTERRUPTIBLE); + /* check once a second */ schedule_timeout(HZ); @@ -667,8 +667,6 @@ static int ftraced(void *ignore) wake_up_interruptible(&ftraced_waiters); ftrace_shutdown_replenish(); - - set_current_state(TASK_INTERRUPTIBLE); } __set_current_state(TASK_RUNNING); return 0; -- cgit v1.2.3 From d15f57f23eaba975309a153b23699cd0c0236974 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:56 +0200 Subject: ftrace: fix mutex unlock in trace output If the trace output changes on reading the trace files, there is a chance that the start function will return NULL. If the start function of a sequence returns NULL the stop equivalent is not called. In this case, all locks that are taken must be released even if they are released in the stop function. This patch fixes a case that a mutex was not released on return of NULL in the start sequence function. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 3009aafa4dde..ea11f4ebfae1 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -964,8 +964,10 @@ static void *s_start(struct seq_file *m, loff_t *pos) mutex_lock(&trace_types_lock); - if (!current_trace || current_trace != iter->trace) + if (!current_trace || current_trace != iter->trace) { + mutex_unlock(&trace_types_lock); return NULL; + } atomic_inc(&trace_record_cmdline_disabled); -- cgit v1.2.3 From 30afdcb1de0a37a2086145a82ca3febebe47d019 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:56 +0200 Subject: ftrace: selftest protect againt max flip There is a slight race condition in the selftest where the max update of the wakeup and irqs/preemption off tests can be doing a max update as the buffers are being tested. If this happens the system can crash with a GPF. This patch adds the max update spinlock around the checking of the buffers to prevent such a race. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_selftest.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index 83e55a2000cc..395274e783b3 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -82,10 +82,12 @@ trace_test_buffer_cpu(struct trace_array *tr, struct trace_array_cpu *data) */ static int trace_test_buffer(struct trace_array *tr, unsigned long *count) { - unsigned long cnt = 0; - int cpu; - int ret = 0; + unsigned long flags, cnt = 0; + int cpu, ret = 0; + /* Don't allow flipping of max traces now */ + raw_local_irq_save(flags); + __raw_spin_lock(&ftrace_max_lock); for_each_possible_cpu(cpu) { if (!head_page(tr->data[cpu])) continue; @@ -96,6 +98,8 @@ static int trace_test_buffer(struct trace_array *tr, unsigned long *count) if (ret) break; } + __raw_spin_unlock(&ftrace_max_lock); + raw_local_irq_restore(flags); if (count) *count = cnt; -- cgit v1.2.3 From a56be3fe2f65f9f776e727bfd382e35db75911d6 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:56 +0200 Subject: ftrace: fix the fault label in updating code The fault label to jump to on fault of updating the code was misplaced preventing the fault from being recorded. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/ftrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 9f44623e0072..498608c015fb 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -93,8 +93,8 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, " movb %b4, 4(%2)\n" "2:\n" ".section .fixup, \"ax\"\n" - " movl $1, %0\n" - "3: jmp 2b\n" + "3: movl $1, %0\n" + " jmp 2b\n" ".previous\n" _ASM_EXTABLE(1b, 3b) : "=r"(faulted), "=a"(replaced) -- cgit v1.2.3 From 8f0f996e80b980fba07d11961d96a5fefb60976a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:56 +0200 Subject: ftrace: dont write protect kernel text Dynamic ftrace cant work when the kernel has its text write protected. This patch keeps the kernel from being write protected when dynamic ftrace is in place. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/init_32.c | 4 ++++ arch/x86/mm/init_64.c | 10 ++++++++-- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index ec30d10154b6..f96eca21ad8f 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -710,6 +710,8 @@ void mark_rodata_ro(void) unsigned long start = PFN_ALIGN(_text); unsigned long size = PFN_ALIGN(_etext) - start; +#ifndef CONFIG_DYNAMIC_FTRACE + /* Dynamic tracing modifies the kernel text section */ set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT); printk(KERN_INFO "Write protecting the kernel text: %luk\n", size >> 10); @@ -722,6 +724,8 @@ void mark_rodata_ro(void) printk(KERN_INFO "Testing CPA: write protecting again\n"); set_pages_ro(virt_to_page(start), size>>PAGE_SHIFT); #endif +#endif /* CONFIG_DYNAMIC_FTRACE */ + start += size; size = (unsigned long)__end_rodata - start; set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT); diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 32ba13b0f818..41824e776b6c 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -766,6 +766,13 @@ EXPORT_SYMBOL_GPL(rodata_test_data); void mark_rodata_ro(void) { unsigned long start = PFN_ALIGN(_stext), end = PFN_ALIGN(__end_rodata); + unsigned long rodata_start = + ((unsigned long)__start_rodata + PAGE_SIZE - 1) & PAGE_MASK; + +#ifdef CONFIG_DYNAMIC_FTRACE + /* Dynamic tracing modifies the kernel text section */ + start = rodata_start; +#endif printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n", (end - start) >> 10); @@ -775,8 +782,7 @@ void mark_rodata_ro(void) * The rodata section (but not the kernel text!) should also be * not-executable. */ - start = ((unsigned long)__start_rodata + PAGE_SIZE - 1) & PAGE_MASK; - set_memory_nx(start, (end - start) >> PAGE_SHIFT); + set_memory_nx(rodata_start, (end - start) >> PAGE_SHIFT); rodata_test(); -- cgit v1.2.3 From 86069782d62e731b4835a0cf8eb7d1d0e17cf306 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:56 +0200 Subject: x86: add a list for custom page fault handlers. Provides kernel modules a way to register custom page fault handlers. On every page fault this will call a list of registered functions. The functions may handle the fault and force do_page_fault() to return immediately. This functionality is similar to the now removed page fault notifiers. Custom page fault handlers are used by debugging and reverse engineering tools. Mmiotrace is one such tool and a patch to add it into the tree will follow. The custom page fault handlers are called earlier in do_page_fault() than the page fault notifiers were. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 8 +++++++ arch/x86/mm/fault.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++++ include/asm-x86/kdebug.h | 9 ++++++++ 3 files changed, 73 insertions(+) diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index ac1e31ba4795..9431a8399844 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -168,6 +168,14 @@ config IOMMU_LEAK Add a simple leak tracer to the IOMMU code. This is useful when you are debugging a buggy device driver that leaks IOMMU mappings. +config PAGE_FAULT_HANDLERS + bool "Custom page fault handlers" + depends on DEBUG_KERNEL + help + Allow the use of custom page fault handlers. A kernel module may + register a function that is called on every page fault. Custom + handlers are used by some debugging and reverse engineering tools. + # # IO delay types: # diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index fd7e1798c75a..343f5c1aacc8 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -49,6 +49,60 @@ #define PF_RSVD (1<<3) #define PF_INSTR (1<<4) +#ifdef CONFIG_PAGE_FAULT_HANDLERS +static HLIST_HEAD(pf_handlers); /* protected by RCU */ +static DEFINE_SPINLOCK(pf_handlers_writer); + +void register_page_fault_handler(struct pf_handler *new_pfh) +{ + unsigned long flags; + spin_lock_irqsave(&pf_handlers_writer, flags); + hlist_add_head_rcu(&new_pfh->hlist, &pf_handlers); + spin_unlock_irqrestore(&pf_handlers_writer, flags); +} +EXPORT_SYMBOL_GPL(register_page_fault_handler); + +/** + * unregister_page_fault_handler: + * The caller must ensure @old_pfh is not in use anymore before freeing it. + * This function does not guarantee it. The list of handlers is protected by + * RCU, so you can do this by e.g. calling synchronize_rcu(). + */ +void unregister_page_fault_handler(struct pf_handler *old_pfh) +{ + unsigned long flags; + spin_lock_irqsave(&pf_handlers_writer, flags); + hlist_del_rcu(&old_pfh->hlist); + spin_unlock_irqrestore(&pf_handlers_writer, flags); +} +EXPORT_SYMBOL_GPL(unregister_page_fault_handler); +#endif + +/* returns non-zero if do_page_fault() should return */ +static int handle_custom_pf(struct pt_regs *regs, unsigned long error_code, + unsigned long address) +{ +#ifdef CONFIG_PAGE_FAULT_HANDLERS + int ret = 0; + struct pf_handler *cur; + struct hlist_node *ncur; + + if (hlist_empty(&pf_handlers)) + return 0; + + rcu_read_lock(); + hlist_for_each_entry_rcu(cur, ncur, &pf_handlers, hlist) { + ret = cur->handler(regs, error_code, address); + if (ret) + break; + } + rcu_read_unlock(); + return ret; +#else + return 0; +#endif +} + static inline int notify_page_fault(struct pt_regs *regs) { #ifdef CONFIG_KPROBES @@ -601,6 +655,8 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) if (notify_page_fault(regs)) return; + if (handle_custom_pf(regs, error_code, address)) + return; /* * We fault-in kernel-space virtual memory on-demand. The diff --git a/include/asm-x86/kdebug.h b/include/asm-x86/kdebug.h index 96651bb59ba1..a80f2d6cc737 100644 --- a/include/asm-x86/kdebug.h +++ b/include/asm-x86/kdebug.h @@ -35,4 +35,13 @@ extern void show_regs(struct pt_regs *regs); extern unsigned long oops_begin(void); extern void oops_end(unsigned long, struct pt_regs *, int signr); +struct pf_handler { + struct hlist_node hlist; + int (*handler)(struct pt_regs *regs, unsigned long error_code, + unsigned long address); +}; + +extern void register_page_fault_handler(struct pf_handler *new_pfh); +extern void unregister_page_fault_handler(struct pf_handler *old_pfh); + #endif -- cgit v1.2.3 From 72829bc3d63cdc592d8f7dd86ad3b3fe8900fb74 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 23 May 2008 21:37:28 +0200 Subject: ftrace: move enums to ftrace.h and make helper function global picked from the mmiotracer patches to distangle the patch queues. Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 24 ++++++++---------------- kernel/trace/trace.h | 15 +++++++++++++++ 2 files changed, 23 insertions(+), 16 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ea11f4ebfae1..0eef0503febd 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -37,7 +37,7 @@ unsigned long __read_mostly tracing_thresh; static int tracing_disabled = 1; -static long +long ns2usecs(cycle_t nsec) { nsec += 500; @@ -96,18 +96,6 @@ unsigned long nsecs_to_usecs(unsigned long nsecs) return nsecs / 1000; } -enum trace_type { - __TRACE_FIRST_TYPE = 0, - - TRACE_FN, - TRACE_CTX, - TRACE_WAKE, - TRACE_STACK, - TRACE_SPECIAL, - - __TRACE_LAST_TYPE -}; - enum trace_flag_type { TRACE_FLAG_IRQS_OFF = 0x01, TRACE_FLAG_NEED_RESCHED = 0x02, @@ -190,7 +178,7 @@ void *head_page(struct trace_array_cpu *data) return page_address(page); } -static int +int trace_seq_printf(struct trace_seq *s, const char *fmt, ...) { int len = (PAGE_SIZE - 1) - s->len; @@ -205,7 +193,7 @@ trace_seq_printf(struct trace_seq *s, const char *fmt, ...) va_end(ap); /* If we can't write it all, don't bother writing anything */ - if (ret > len) + if (ret >= len) return 0; s->len += ret; @@ -638,7 +626,7 @@ tracing_generic_entry_update(struct trace_entry *entry, unsigned long flags) pc = preempt_count(); entry->preempt_count = pc & 0xff; - entry->pid = tsk->pid; + entry->pid = (tsk) ? tsk->pid : 0; entry->t = ftrace_now(raw_smp_processor_id()); entry->flags = (irqs_disabled_flags(flags) ? TRACE_FLAG_IRQS_OFF : 0) | ((pc & HARDIRQ_MASK) ? TRACE_FLAG_HARDIRQ : 0) | @@ -1541,6 +1529,9 @@ static int trace_empty(struct trace_iterator *iter) static int print_trace_line(struct trace_iterator *iter) { + if (iter->trace && iter->trace->print_line) + return iter->trace->print_line(iter); + if (trace_flags & TRACE_ITER_BIN) return print_bin_fmt(iter); @@ -2162,6 +2153,7 @@ static int tracing_open_pipe(struct inode *inode, struct file *filp) return -ENOMEM; iter->tr = &global_trace; + iter->trace = current_trace; filp->private_data = iter; diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 25cba28eb9ba..b0ca7473671b 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -6,6 +6,18 @@ #include #include +enum trace_type { + __TRACE_FIRST_TYPE = 0, + + TRACE_FN, + TRACE_CTX, + TRACE_WAKE, + TRACE_STACK, + TRACE_SPECIAL, + + __TRACE_LAST_TYPE +}; + /* * Function trace entry - function address and parent function addres: */ @@ -130,6 +142,7 @@ struct tracer { int (*selftest)(struct tracer *trace, struct trace_array *tr); #endif + int (*print_line)(struct trace_iterator *iter); struct tracer *next; int print_max; }; @@ -276,6 +289,8 @@ extern int trace_selftest_startup_sched_switch(struct tracer *trace, #endif /* CONFIG_FTRACE_STARTUP_TEST */ extern void *head_page(struct trace_array_cpu *data); +extern int trace_seq_printf(struct trace_seq *s, const char *fmt, ...); +extern long ns2usecs(cycle_t nsec); extern unsigned long trace_flags; -- cgit v1.2.3 From d17d969160c18b631a19c2b34d260691402650f8 Mon Sep 17 00:00:00 2001 From: Ankita Garg Date: Mon, 12 May 2008 21:20:58 +0200 Subject: ftrace: fix conversion of task state to char in latency tracer The conversion of task states to a character in the sched_switch tracer (part of latency tracer infrastructure), seems to be incorrect. We currently do it by indexing into the state_to_char array using the state value. The state values do not map directly into the array index and are thus incorrect. The following patch addresses this issue. This is also what is being done even in the show_task() routine in kernel/sched.c The patch has been compile and run tested. Signed-off-by: Ankita Garg Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 0eef0503febd..9197782d15c9 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1208,6 +1208,7 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) char *comm; int S, T; int i; + unsigned state; if (!next_entry) next_entry = entry; @@ -1238,11 +1239,11 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) break; case TRACE_CTX: case TRACE_WAKE: - S = entry->ctx.prev_state < sizeof(state_to_char) ? - state_to_char[entry->ctx.prev_state] : 'X'; T = entry->ctx.next_state < sizeof(state_to_char) ? state_to_char[entry->ctx.next_state] : 'X'; + state = entry->ctx.prev_state ? __ffs(entry->ctx.prev_state) + 1 : 0; + S = state < sizeof(state_to_char) - 1 ? state_to_char[state] : 'X'; comm = trace_find_cmdline(entry->ctx.next_pid); trace_seq_printf(s, " %5d:%3d:%c %s %5d:%3d:%c %s\n", entry->ctx.prev_pid, -- cgit v1.2.3 From 8487c23765b6e0444ec6b5f1530766d63fe68e35 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:58 +0200 Subject: ftrace: allow trace_pipe to block on all reads We expect things like "cat" to block on reads to trace_pipe. That's what trace_pipe is for. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 9197782d15c9..fd4ecc292005 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2231,8 +2231,6 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, start = 0; while (trace_empty(iter)) { - if (!(trace_flags & TRACE_ITER_BLOCK)) - return -EWOULDBLOCK; /* * This is a make-shift waitqueue. The reason we don't use * an actual wait queue is because: -- cgit v1.2.3 From b5685aede3b7b65e72ddc73b951aa1f70798a614 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:58 +0200 Subject: ftrace: restore iterator trace in pipe read The trace iterator is reset in the read. We still need to restore the tracer that the trace_pipe was opened with. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index fd4ecc292005..d141fc98f3a8 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2202,6 +2202,8 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, { struct trace_iterator *iter = filp->private_data; struct trace_array_cpu *data; + struct trace_array *tr = iter->tr; + struct tracer *tracer = iter->trace; static cpumask_t mask; static int start; unsigned long flags; @@ -2274,7 +2276,8 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, cnt = PAGE_SIZE - 1; memset(iter, 0, sizeof(*iter)); - iter->tr = &global_trace; + iter->tr = tr; + iter->trace = tracer; iter->pos = -1; /* -- cgit v1.2.3 From 845279972f1736c3463c9cebd1bad92a0a347176 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:58 +0200 Subject: ftrace: return EOF in trace_pipe on change of tracer Break out of while loop with EOF when the current_trace changes. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index d141fc98f3a8..2af940433e96 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2253,6 +2253,9 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, if (signal_pending(current)) return -EINTR; + if (iter->trace != current_trace) + return 0; + /* * We block until we read something and tracing is disabled. * We still block if tracing is disabled, but we have never -- cgit v1.2.3 From 2dc8f09571a61d9cb3dc47bba6608689dfe15d16 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:58 +0200 Subject: ftrace: trace_pipe implement NONBLOCK This patch implements "NONBLOCK" for trace_pipe. If the trace_pipe is opened with O_NONBLOCK, then the trace_pipe read will not block when buffer is empty. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 2af940433e96..3b4eaf36ed5d 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2233,6 +2233,10 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, start = 0; while (trace_empty(iter)) { + + if ((filp->f_flags & O_NONBLOCK)) + return -EAGAIN; + /* * This is a make-shift waitqueue. The reason we don't use * an actual wait queue is because: -- cgit v1.2.3 From 05bd68c514579e007b46e4fa0461b78416a3f4c2 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:59 +0200 Subject: ftrace: user proper API for setting RT prios in selftest The wakeup selftest used an internal API for setting the test task priority. This patch fixes it to use the proper API for performing such a task. Thanks goes to Randy Dunlap for pointing out this build failure. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_selftest.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index 395274e783b3..a5f6001c3332 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -410,11 +410,11 @@ trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array * #ifdef CONFIG_SCHED_TRACER static int trace_wakeup_test_thread(void *data) { - struct completion *x = data; - /* Make this a RT thread, doesn't need to be too high */ + struct sched_param param = { .sched_priority = 5 }; + struct completion *x = data; - rt_mutex_setprio(current, MAX_RT_PRIO - 5); + sched_setscheduler(current, SCHED_FIFO, ¶m); /* Make it know we have a new prio */ complete(x); -- cgit v1.2.3 From a98a3c3fde3ae7614f19758a043691b6f59dac53 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:20:59 +0200 Subject: ftrace: trace_entries to dynamically change trace buffer size This patch adds /debug/tracing/trace_entries that allows users to see as well as modify the number of trace entries the buffers hold. The number of entries only increments in ENTRIES_PER_PAGE which is calculated by the size of an entry with the number of entries that can fit in a page. The user does not need to use an exact size, but the entries will be rounded to one of the increments. Trying to set the entries to 0 will return with -EINVAL. To avoid race conditions, the modification of the buffer size can only be done when tracing is completely disabled (current_tracer == none). A info message will be printed if a user tries to modify the buffer size when not set to none. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 145 ++++++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 137 insertions(+), 8 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 3b4eaf36ed5d..4723e012151d 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -35,6 +35,15 @@ unsigned long __read_mostly tracing_max_latency = (cycle_t)ULONG_MAX; unsigned long __read_mostly tracing_thresh; +/* dummy trace to disable tracing */ +static struct tracer no_tracer __read_mostly = +{ + .name = "none", +}; + +static int trace_alloc_page(void); +static int trace_free_page(void); + static int tracing_disabled = 1; long @@ -2364,6 +2373,70 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, return read; } +static ssize_t +tracing_entries_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + struct trace_array *tr = filp->private_data; + char buf[64]; + int r; + + r = sprintf(buf, "%lu\n", tr->entries); + return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); +} + +static ssize_t +tracing_entries_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + unsigned long val; + char buf[64]; + + if (cnt > 63) + cnt = 63; + + if (copy_from_user(&buf, ubuf, cnt)) + return -EFAULT; + + buf[cnt] = 0; + + val = simple_strtoul(buf, NULL, 10); + + /* must have at least 1 entry */ + if (!val) + return -EINVAL; + + mutex_lock(&trace_types_lock); + + if (current_trace != &no_tracer) { + cnt = -EBUSY; + pr_info("ftrace: set current_tracer to none" + " before modifying buffer size\n"); + goto out; + } + + if (val > global_trace.entries) { + while (global_trace.entries < val) { + if (trace_alloc_page()) { + cnt = -ENOMEM; + goto out; + } + } + } else { + /* include the number of entries in val (inc of page entries) */ + while (global_trace.entries > val + (ENTRIES_PER_PAGE - 1)) + trace_free_page(); + } + + filp->f_pos += cnt; + + out: + max_tr.entries = global_trace.entries; + mutex_unlock(&trace_types_lock); + + return cnt; +} + static struct file_operations tracing_max_lat_fops = { .open = tracing_open_generic, .read = tracing_max_lat_read, @@ -2389,6 +2462,12 @@ static struct file_operations tracing_pipe_fops = { .release = tracing_release_pipe, }; +static struct file_operations tracing_entries_fops = { + .open = tracing_open_generic, + .read = tracing_entries_read, + .write = tracing_entries_write, +}; + #ifdef CONFIG_DYNAMIC_FTRACE static ssize_t @@ -2500,6 +2579,12 @@ static __init void tracer_init_debugfs(void) pr_warning("Could not create debugfs " "'tracing_threash' entry\n"); + entry = debugfs_create_file("trace_entries", 0644, d_tracer, + &global_trace, &tracing_entries_fops); + if (!entry) + pr_warning("Could not create debugfs " + "'tracing_threash' entry\n"); + #ifdef CONFIG_DYNAMIC_FTRACE entry = debugfs_create_file("dyn_ftrace_total_info", 0444, d_tracer, &ftrace_update_tot_cnt, @@ -2510,12 +2595,6 @@ static __init void tracer_init_debugfs(void) #endif } -/* dummy trace to disable tracing */ -static struct tracer no_tracer __read_mostly = -{ - .name = "none", -}; - static int trace_alloc_page(void) { struct trace_array_cpu *data; @@ -2552,7 +2631,6 @@ static int trace_alloc_page(void) /* Now that we successfully allocate a page per CPU, add them */ for_each_possible_cpu(i) { data = global_trace.data[i]; - data->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED; page = list_entry(pages.next, struct page, lru); list_del_init(&page->lru); list_add_tail(&page->lru, &data->trace_pages); @@ -2560,7 +2638,6 @@ static int trace_alloc_page(void) #ifdef CONFIG_TRACER_MAX_TRACE data = max_tr.data[i]; - data->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED; page = list_entry(pages.next, struct page, lru); list_del_init(&page->lru); list_add_tail(&page->lru, &data->trace_pages); @@ -2579,6 +2656,55 @@ static int trace_alloc_page(void) return -ENOMEM; } +static int trace_free_page(void) +{ + struct trace_array_cpu *data; + struct page *page; + struct list_head *p; + int i; + int ret = 0; + + /* free one page from each buffer */ + for_each_possible_cpu(i) { + data = global_trace.data[i]; + p = data->trace_pages.next; + if (p == &data->trace_pages) { + /* should never happen */ + WARN_ON(1); + tracing_disabled = 1; + ret = -1; + break; + } + page = list_entry(p, struct page, lru); + ClearPageLRU(page); + list_del(&page->lru); + __free_page(page); + + tracing_reset(data); + +#ifdef CONFIG_TRACER_MAX_TRACE + data = max_tr.data[i]; + p = data->trace_pages.next; + if (p == &data->trace_pages) { + /* should never happen */ + WARN_ON(1); + tracing_disabled = 1; + ret = -1; + break; + } + page = list_entry(p, struct page, lru); + ClearPageLRU(page); + list_del(&page->lru); + __free_page(page); + + tracing_reset(data); +#endif + } + global_trace.entries -= ENTRIES_PER_PAGE; + + return ret; +} + __init static int tracer_alloc_buffers(void) { struct trace_array_cpu *data; @@ -2609,6 +2735,9 @@ __init static int tracer_alloc_buffers(void) /* use the LRU flag to differentiate the two buffers */ ClearPageLRU(page); + data->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED; + max_tr.data[i]->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED; + /* Only allocate if we are actually using the max trace */ #ifdef CONFIG_TRACER_MAX_TRACE array = (void *)__get_free_page(GFP_KERNEL); -- cgit v1.2.3 From bb065afb8ebd07a03155502dba29ebf0f6fe67e8 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:21:00 +0200 Subject: lockdep: update lockdep_recursion on graph_lock With the introduction of ftrace, it is possible to recurse into the lockdep functions via the mcount call. To prevent possible lockups, updating the lockdep_recursion counter on grabbing the internal lockdep_lock should prevent deadlocks. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/lockdep.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/lockdep.c b/kernel/lockdep.c index 90a440cbd6de..65548eff029e 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -82,6 +82,8 @@ static int graph_lock(void) __raw_spin_unlock(&lockdep_lock); return 0; } + /* prevent any recursions within lockdep from causing deadlocks */ + current->lockdep_recursion++; return 1; } @@ -90,6 +92,7 @@ static inline int graph_unlock(void) if (debug_locks && !__raw_spin_is_locked(&lockdep_lock)) return DEBUG_LOCKS_WARN_ON(1); + current->lockdep_recursion--; __raw_spin_unlock(&lockdep_lock); return 0; } -- cgit v1.2.3 From 93dcc6ea096c51cc30ad0f6647ed05fead2439bf Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 21:21:00 +0200 Subject: ftrace: simplify hexprint simplify hex to ascii conversion. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- kernel/trace/trace.c | 23 +++++------------------ 1 file changed, 5 insertions(+), 18 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 4723e012151d..627e39936ea7 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -248,19 +248,18 @@ trace_seq_putmem(struct trace_seq *s, void *mem, size_t len) } #define HEX_CHARS 17 +static const char hex2asc[] = "0123456789abcdef"; static int trace_seq_putmem_hex(struct trace_seq *s, void *mem, size_t len) { unsigned char hex[HEX_CHARS]; - unsigned char *data; + unsigned char *data = mem; unsigned char byte; int i, j; BUG_ON(len >= HEX_CHARS); - data = mem; - #ifdef __BIG_ENDIAN for (i = 0, j = 0; i < len; i++) { #else @@ -268,22 +267,10 @@ trace_seq_putmem_hex(struct trace_seq *s, void *mem, size_t len) #endif byte = data[i]; - hex[j] = byte & 0x0f; - if (hex[j] >= 10) - hex[j] += 'a' - 10; - else - hex[j] += '0'; - j++; - - hex[j] = byte >> 4; - if (hex[j] >= 10) - hex[j] += 'a' - 10; - else - hex[j] += '0'; - j++; + hex[j++] = hex2asc[byte & 0x0f]; + hex[j++] = hex2asc[byte >> 4]; } - hex[j] = ' '; - j++; + hex[j++] = ' '; return trace_seq_putmem(s, hex, j); } -- cgit v1.2.3 From afc2abc0ae4265730a0fc48618012193a09a1d10 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:21:00 +0200 Subject: ftrace: cleanups no code changed. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 627e39936ea7..d6b60576f991 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -1155,12 +1155,12 @@ lat_print_generic(struct trace_seq *s, struct trace_entry *entry, int cpu) hardirq = entry->flags & TRACE_FLAG_HARDIRQ; softirq = entry->flags & TRACE_FLAG_SOFTIRQ; - if (hardirq && softirq) + if (hardirq && softirq) { trace_seq_putc(s, 'H'); - else { - if (hardirq) + } else { + if (hardirq) { trace_seq_putc(s, 'h'); - else { + } else { if (softirq) trace_seq_putc(s, 's'); else @@ -2177,8 +2177,7 @@ tracing_poll_pipe(struct file *filp, poll_table *poll_table) * Always select as readable when in blocking mode */ return POLLIN | POLLRDNORM; - } - else { + } else { if (!trace_empty(iter)) return POLLIN | POLLRDNORM; poll_wait(filp, &trace_wait, poll_table); -- cgit v1.2.3 From cffae437cdfbc8a5370d38cefbff1dfe34dad6ca Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:21:00 +0200 Subject: ftrace: simple clean ups Andrew Morton mentioned some clean ups that should be done to ftrace. This patch does some of the simple clean ups. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index d6b60576f991..0a367362ba2f 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -36,8 +36,7 @@ unsigned long __read_mostly tracing_max_latency = (cycle_t)ULONG_MAX; unsigned long __read_mostly tracing_thresh; /* dummy trace to disable tracing */ -static struct tracer no_tracer __read_mostly = -{ +static struct tracer no_tracer __read_mostly = { .name = "none", }; @@ -1906,8 +1905,8 @@ tracing_iter_ctrl_write(struct file *filp, const char __user *ubuf, int neg = 0; int i; - if (cnt > 63) - cnt = 63; + if (cnt >= sizeof(buf)) + return -EINVAL; if (copy_from_user(&buf, ubuf, cnt)) return -EFAULT; @@ -1999,8 +1998,8 @@ tracing_ctrl_write(struct file *filp, const char __user *ubuf, long val; char buf[64]; - if (cnt > 63) - cnt = 63; + if (cnt >= sizeof(buf)) + return -EINVAL; if (copy_from_user(&buf, ubuf, cnt)) return -EFAULT; @@ -2099,10 +2098,10 @@ tracing_max_lat_read(struct file *filp, char __user *ubuf, char buf[64]; int r; - r = snprintf(buf, 64, "%ld\n", + r = snprintf(buf, sizeof(buf), "%ld\n", *ptr == (unsigned long)-1 ? -1 : nsecs_to_usecs(*ptr)); - if (r > 64) - r = 64; + if (r > sizeof(buf)) + r = sizeof(buf); return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); } @@ -2114,8 +2113,8 @@ tracing_max_lat_write(struct file *filp, const char __user *ubuf, long val; char buf[64]; - if (cnt > 63) - cnt = 63; + if (cnt >= sizeof(buf)) + return -EINVAL; if (copy_from_user(&buf, ubuf, cnt)) return -EFAULT; @@ -2378,8 +2377,8 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, unsigned long val; char buf[64]; - if (cnt > 63) - cnt = 63; + if (cnt >= sizeof(buf)) + return -EINVAL; if (copy_from_user(&buf, ubuf, cnt)) return -EFAULT; -- cgit v1.2.3 From c6caeeb142cd3a03c46107aac45c8effc02bbadb Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:21:00 +0200 Subject: ftrace: replace simple_strtoul with strict_strtoul Andrew Morton suggested using strict_strtoul over simple_strtoul. This patch replaces them in ftrace. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 0a367362ba2f..290e9da7aa9a 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -92,9 +92,16 @@ void trace_wake_up(void) static int __init set_nr_entries(char *str) { + unsigned long nr_entries; + int ret; + if (!str) return 0; - trace_nr_entries = simple_strtoul(str, &str, 0); + ret = strict_strtoul(str, 0, &nr_entries); + /* nr_entries can not be zero */ + if (ret < 0 || nr_entries == 0) + return 0; + trace_nr_entries = nr_entries; return 1; } __setup("trace_entries=", set_nr_entries); @@ -1995,8 +2002,9 @@ tracing_ctrl_write(struct file *filp, const char __user *ubuf, size_t cnt, loff_t *ppos) { struct trace_array *tr = filp->private_data; - long val; char buf[64]; + long val; + int ret; if (cnt >= sizeof(buf)) return -EINVAL; @@ -2006,7 +2014,9 @@ tracing_ctrl_write(struct file *filp, const char __user *ubuf, buf[cnt] = 0; - val = simple_strtoul(buf, NULL, 10); + ret = strict_strtoul(buf, 10, &val); + if (ret < 0) + return ret; val = !!val; @@ -2110,8 +2120,9 @@ tracing_max_lat_write(struct file *filp, const char __user *ubuf, size_t cnt, loff_t *ppos) { long *ptr = filp->private_data; - long val; char buf[64]; + long val; + int ret; if (cnt >= sizeof(buf)) return -EINVAL; @@ -2121,7 +2132,9 @@ tracing_max_lat_write(struct file *filp, const char __user *ubuf, buf[cnt] = 0; - val = simple_strtoul(buf, NULL, 10); + ret = strict_strtoul(buf, 10, &val); + if (ret < 0) + return ret; *ptr = val * 1000; @@ -2376,6 +2389,7 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, { unsigned long val; char buf[64]; + int ret; if (cnt >= sizeof(buf)) return -EINVAL; @@ -2385,7 +2399,9 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, buf[cnt] = 0; - val = simple_strtoul(buf, NULL, 10); + ret = strict_strtoul(buf, 10, &val); + if (ret < 0) + return ret; /* must have at least 1 entry */ if (!val) -- cgit v1.2.3 From ab46428c6969d50ecf6f6e97b7a84abba6274368 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:21:00 +0200 Subject: ftrace: modulize the number of CPU buffers Currently ftrace allocates a trace buffer for every possible CPU. Work is being done to change it to only online CPUs and add hooks to hotplug CPUS. This patch lays out the infrastructure for such a change. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 38 ++++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 14 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 290e9da7aa9a..5da391c5fb0d 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -35,6 +35,12 @@ unsigned long __read_mostly tracing_max_latency = (cycle_t)ULONG_MAX; unsigned long __read_mostly tracing_thresh; +static unsigned long __read_mostly tracing_nr_buffers; +static cpumask_t __read_mostly tracing_buffer_mask; + +#define for_each_tracing_cpu(cpu) \ + for_each_cpu_mask(cpu, tracing_buffer_mask) + /* dummy trace to disable tracing */ static struct tracer no_tracer __read_mostly = { .name = "none", @@ -328,7 +334,7 @@ update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) WARN_ON_ONCE(!irqs_disabled()); __raw_spin_lock(&ftrace_max_lock); /* clear out all the previous traces */ - for_each_possible_cpu(i) { + for_each_tracing_cpu(i) { data = tr->data[i]; flip_trace(max_tr.data[i], data); tracing_reset(data); @@ -352,7 +358,7 @@ update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu) WARN_ON_ONCE(!irqs_disabled()); __raw_spin_lock(&ftrace_max_lock); - for_each_possible_cpu(i) + for_each_tracing_cpu(i) tracing_reset(max_tr.data[i]); flip_trace(max_tr.data[cpu], data); @@ -398,7 +404,7 @@ int register_tracer(struct tracer *type) * internal tracing to verify that everything is in order. * If we fail, we do not register this tracer. */ - for_each_possible_cpu(i) { + for_each_tracing_cpu(i) { data = tr->data[i]; if (!head_page(data)) continue; @@ -417,7 +423,7 @@ int register_tracer(struct tracer *type) goto out; } /* Only reset on passing, to avoid touching corrupted buffers */ - for_each_possible_cpu(i) { + for_each_tracing_cpu(i) { data = tr->data[i]; if (!head_page(data)) continue; @@ -847,7 +853,7 @@ find_next_entry(struct trace_iterator *iter, int *ent_cpu) int next_cpu = -1; int cpu; - for_each_possible_cpu(cpu) { + for_each_tracing_cpu(cpu) { if (!head_page(tr->data[cpu])) continue; ent = trace_entry_idx(tr, tr->data[cpu], iter, cpu); @@ -972,7 +978,7 @@ static void *s_start(struct seq_file *m, loff_t *pos) iter->prev_ent = NULL; iter->prev_cpu = -1; - for_each_possible_cpu(i) { + for_each_tracing_cpu(i) { iter->next_idx[i] = 0; iter->next_page[i] = NULL; } @@ -1089,7 +1095,7 @@ print_trace_header(struct seq_file *m, struct trace_iterator *iter) if (type) name = type->name; - for_each_possible_cpu(cpu) { + for_each_tracing_cpu(cpu) { if (head_page(tr->data[cpu])) { total += tr->data[cpu]->trace_idx; if (tr->data[cpu]->trace_idx > tr->entries) @@ -1519,7 +1525,7 @@ static int trace_empty(struct trace_iterator *iter) struct trace_array_cpu *data; int cpu; - for_each_possible_cpu(cpu) { + for_each_tracing_cpu(cpu) { data = iter->tr->data[cpu]; if (head_page(data) && data->trace_idx && @@ -1831,7 +1837,7 @@ tracing_cpumask_write(struct file *filp, const char __user *ubuf, raw_local_irq_disable(); __raw_spin_lock(&ftrace_max_lock); - for_each_possible_cpu(cpu) { + for_each_tracing_cpu(cpu) { /* * Increase/decrease the disabled counter if we are * about to flip a bit in the cpumask: @@ -2308,7 +2314,7 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, ftrace_enabled = 0; #endif smp_wmb(); - for_each_possible_cpu(cpu) { + for_each_tracing_cpu(cpu) { data = iter->tr->data[cpu]; if (!head_page(data) || !data->trace_idx) @@ -2605,7 +2611,7 @@ static int trace_alloc_page(void) int i; /* first allocate a page for each CPU */ - for_each_possible_cpu(i) { + for_each_tracing_cpu(i) { array = (void *)__get_free_page(GFP_KERNEL); if (array == NULL) { printk(KERN_ERR "tracer: failed to allocate page" @@ -2630,7 +2636,7 @@ static int trace_alloc_page(void) } /* Now that we successfully allocate a page per CPU, add them */ - for_each_possible_cpu(i) { + for_each_tracing_cpu(i) { data = global_trace.data[i]; page = list_entry(pages.next, struct page, lru); list_del_init(&page->lru); @@ -2666,7 +2672,7 @@ static int trace_free_page(void) int ret = 0; /* free one page from each buffer */ - for_each_possible_cpu(i) { + for_each_tracing_cpu(i) { data = global_trace.data[i]; p = data->trace_pages.next; if (p == &data->trace_pages) { @@ -2717,8 +2723,12 @@ __init static int tracer_alloc_buffers(void) global_trace.ctrl = tracer_enabled; + /* TODO: make the number of buffers hot pluggable with CPUS */ + tracing_nr_buffers = num_possible_cpus(); + tracing_buffer_mask = cpu_possible_map; + /* Allocate the first page for all buffers */ - for_each_possible_cpu(i) { + for_each_tracing_cpu(i) { data = global_trace.data[i] = &per_cpu(global_trace_cpu, i); max_tr.data[i] = &per_cpu(max_data, i); -- cgit v1.2.3 From 4fcdae83cebda24b519a89d3dd976081fff1ca80 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:21:00 +0200 Subject: ftrace: comment code This is first installment of adding documentation to the ftrace. Expect many more patches of this kind in the near future. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++++++- kernel/trace/trace.h | 7 +++ 2 files changed, 141 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 5da391c5fb0d..a102b11eacf2 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -64,26 +64,79 @@ cycle_t ftrace_now(int cpu) return cpu_clock(cpu); } +/* + * The global_trace is the descriptor that holds the tracing + * buffers for the live tracing. For each CPU, it contains + * a link list of pages that will store trace entries. The + * page descriptor of the pages in the memory is used to hold + * the link list by linking the lru item in the page descriptor + * to each of the pages in the buffer per CPU. + * + * For each active CPU there is a data field that holds the + * pages for the buffer for that CPU. Each CPU has the same number + * of pages allocated for its buffer. + */ static struct trace_array global_trace; static DEFINE_PER_CPU(struct trace_array_cpu, global_trace_cpu); +/* + * The max_tr is used to snapshot the global_trace when a maximum + * latency is reached. Some tracers will use this to store a maximum + * trace while it continues examining live traces. + * + * The buffers for the max_tr are set up the same as the global_trace. + * When a snapshot is taken, the link list of the max_tr is swapped + * with the link list of the global_trace and the buffers are reset for + * the global_trace so the tracing can continue. + */ static struct trace_array max_tr; static DEFINE_PER_CPU(struct trace_array_cpu, max_data); +/* tracer_enabled is used to toggle activation of a tracer */ static int tracer_enabled = 1; + +/* + * trace_nr_entries is the number of entries that is allocated + * for a buffer. Note, the number of entries is always rounded + * to ENTRIES_PER_PAGE. + */ static unsigned long trace_nr_entries = 65536UL; +/* trace_types holds a link list of available tracers. */ static struct tracer *trace_types __read_mostly; + +/* current_trace points to the tracer that is currently active */ static struct tracer *current_trace __read_mostly; + +/* + * max_tracer_type_len is used to simplify the allocating of + * buffers to read userspace tracer names. We keep track of + * the longest tracer name registered. + */ static int max_tracer_type_len; +/* + * trace_types_lock is used to protect the trace_types list. + * This lock is also used to keep user access serialized. + * Accesses from userspace will grab this lock while userspace + * activities happen inside the kernel. + */ static DEFINE_MUTEX(trace_types_lock); + +/* trace_wait is a waitqueue for tasks blocked on trace_poll */ static DECLARE_WAIT_QUEUE_HEAD(trace_wait); +/* trace_flags holds iter_ctrl options */ unsigned long trace_flags = TRACE_ITER_PRINT_PARENT; +/** + * trace_wake_up - wake up tasks waiting for trace input + * + * Simply wakes up any task that is blocked on the trace_wait + * queue. These is used with trace_poll for tasks polling the trace. + */ void trace_wake_up(void) { /* @@ -117,6 +170,14 @@ unsigned long nsecs_to_usecs(unsigned long nsecs) return nsecs / 1000; } +/* + * trace_flag_type is an enumeration that holds different + * states when a trace occurs. These are: + * IRQS_OFF - interrupts were disabled + * NEED_RESCED - reschedule is requested + * HARDIRQ - inside an interrupt handler + * SOFTIRQ - inside a softirq handler + */ enum trace_flag_type { TRACE_FLAG_IRQS_OFF = 0x01, TRACE_FLAG_NEED_RESCHED = 0x02, @@ -124,10 +185,14 @@ enum trace_flag_type { TRACE_FLAG_SOFTIRQ = 0x08, }; +/* + * TRACE_ITER_SYM_MASK masks the options in trace_flags that + * control the output of kernel symbols. + */ #define TRACE_ITER_SYM_MASK \ (TRACE_ITER_PRINT_PARENT|TRACE_ITER_SYM_OFFSET|TRACE_ITER_SYM_ADDR) -/* These must match the bit postions above */ +/* These must match the bit postions in trace_iterator_flags */ static const char *trace_options[] = { "print-parent", "sym-offset", @@ -142,6 +207,15 @@ static const char *trace_options[] = { NULL }; +/* + * ftrace_max_lock is used to protect the swapping of buffers + * when taking a max snapshot. The buffers themselves are + * protected by per_cpu spinlocks. But the action of the swap + * needs its own lock. + * + * This is defined as a raw_spinlock_t in order to help + * with performance when lockdep debugging is enabled. + */ static raw_spinlock_t ftrace_max_lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED; @@ -172,6 +246,13 @@ __update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) tracing_record_cmdline(current); } +/** + * check_pages - integrity check of trace buffers + * + * As a safty measure we check to make sure the data pages have not + * been corrupted. TODO: configure to disable this because it adds + * a bit of overhead. + */ void check_pages(struct trace_array_cpu *data) { struct page *page, *tmp; @@ -185,6 +266,13 @@ void check_pages(struct trace_array_cpu *data) } } +/** + * head_page - page address of the first page in per_cpu buffer. + * + * head_page returns the page address of the first page in + * a per_cpu buffer. This also preforms various consistency + * checks to make sure the buffer has not been corrupted. + */ void *head_page(struct trace_array_cpu *data) { struct page *page; @@ -199,6 +287,17 @@ void *head_page(struct trace_array_cpu *data) return page_address(page); } +/** + * trace_seq_printf - sequence printing of trace information + * @s: trace sequence descriptor + * @fmt: printf format string + * + * The tracer may use either sequence operations or its own + * copy to user routines. To simplify formating of a trace + * trace_seq_printf is used to store strings into a special + * buffer (@s). Then the output may be either used by + * the sequencer or pulled into another buffer. + */ int trace_seq_printf(struct trace_seq *s, const char *fmt, ...) { @@ -222,6 +321,16 @@ trace_seq_printf(struct trace_seq *s, const char *fmt, ...) return len; } +/** + * trace_seq_puts - trace sequence printing of simple string + * @s: trace sequence descriptor + * @str: simple string to record + * + * The tracer may use either the sequence operations or its own + * copy to user routines. This function records a simple string + * into a special buffer (@s) for later retrieval by a sequencer + * or other mechanism. + */ static int trace_seq_puts(struct trace_seq *s, const char *str) { @@ -304,6 +413,13 @@ trace_print_seq(struct seq_file *m, struct trace_seq *s) trace_seq_reset(s); } +/* + * flip the trace buffers between two trace descriptors. + * This usually is the buffers between the global_trace and + * the max_tr to record a snapshot of a current trace. + * + * The ftrace_max_lock must be held. + */ static void flip_trace(struct trace_array_cpu *tr1, struct trace_array_cpu *tr2) { @@ -325,6 +441,15 @@ flip_trace(struct trace_array_cpu *tr1, struct trace_array_cpu *tr2) check_pages(tr2); } +/** + * update_max_tr - snapshot all trace buffers from global_trace to max_tr + * @tr: tracer + * @tsk: the task with the latency + * @cpu: The cpu that initiated the trace. + * + * Flip the buffers between the @tr and the max_tr and record information + * about which task was the cause of this latency. + */ void update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) { @@ -349,6 +474,8 @@ update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) * @tr - tracer * @tsk - task with the latency * @cpu - the cpu of the buffer to copy. + * + * Flip the trace of a single CPU buffer between the @tr and the max_tr. */ void update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu) @@ -368,6 +495,12 @@ update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu) __raw_spin_unlock(&ftrace_max_lock); } +/** + * register_tracer - register a tracer with the ftrace system. + * @type - the plugin for the tracer + * + * Register a new plugin tracer. + */ int register_tracer(struct tracer *type) { struct tracer *t; diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index b0ca7473671b..21c29ee13e53 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -294,6 +294,13 @@ extern long ns2usecs(cycle_t nsec); extern unsigned long trace_flags; +/* + * trace_iterator_flags is an enumeration that defines bit + * positions into trace_flags that controls the output. + * + * NOTE: These bits must match the trace_options array in + * trace.c. + */ enum trace_iterator_flags { TRACE_ITER_PRINT_PARENT = 0x01, TRACE_ITER_SYM_OFFSET = 0x02, -- cgit v1.2.3 From 25b0b44a1c732ccfc58095cdd8438955a0a19fff Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:21:00 +0200 Subject: ftrace: fix comm on function trace output In cleaning up of the sched_switch code, the function trace recording of task comms was removed. This patch adds back the recording of comms for function trace. The output of ftrace now has the task comm instead of <...>. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 7 ++++++- kernel/trace/trace.h | 2 ++ kernel/trace/trace_functions.c | 2 ++ kernel/trace/trace_sched_switch.c | 7 +++++-- 4 files changed, 15 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index a102b11eacf2..1281969103b8 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -620,7 +620,12 @@ static unsigned map_cmdline_to_pid[SAVED_CMDLINES]; static char saved_cmdlines[SAVED_CMDLINES][TASK_COMM_LEN]; static int cmdline_idx; static DEFINE_SPINLOCK(trace_cmdline_lock); -atomic_t trace_record_cmdline_disabled; + +/* trace in all context switches */ +atomic_t trace_record_cmdline_enabled __read_mostly; + +/* temporary disable recording */ +atomic_t trace_record_cmdline_disabled __read_mostly; static void trace_init_cmdlines(void) { diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 21c29ee13e53..8991c5efcc74 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -216,6 +216,8 @@ extern unsigned long nsecs_to_usecs(unsigned long nsecs); extern unsigned long tracing_max_latency; extern unsigned long tracing_thresh; +extern atomic_t trace_record_cmdline_enabled; + void update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu); void update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu); diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c index 4165d34bd28a..0a084656d7cf 100644 --- a/kernel/trace/trace_functions.c +++ b/kernel/trace/trace_functions.c @@ -29,12 +29,14 @@ static void function_reset(struct trace_array *tr) static void start_function_trace(struct trace_array *tr) { function_reset(tr); + atomic_inc(&trace_record_cmdline_enabled); tracing_start_function_trace(); } static void stop_function_trace(struct trace_array *tr) { tracing_stop_function_trace(); + atomic_dec(&trace_record_cmdline_enabled); } static void function_trace_init(struct trace_array *tr) diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index 5671db0e1827..a3376478fc2c 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -29,8 +29,6 @@ ctx_switch_func(void *__rq, struct task_struct *prev, struct task_struct *next) if (!tracer_enabled) return; - tracing_record_cmdline(prev); - local_irq_save(flags); cpu = raw_smp_processor_id(); data = tr->data[cpu]; @@ -73,6 +71,9 @@ void ftrace_ctx_switch(void *__rq, struct task_struct *prev, struct task_struct *next) { + if (unlikely(atomic_read(&trace_record_cmdline_enabled))) + tracing_record_cmdline(prev); + /* * If tracer_switch_func only points to the local * switch func, it still needs the ptr passed to it. @@ -134,11 +135,13 @@ static void sched_switch_reset(struct trace_array *tr) static void start_sched_trace(struct trace_array *tr) { sched_switch_reset(tr); + atomic_inc(&trace_record_cmdline_enabled); tracer_enabled = 1; } static void stop_sched_trace(struct trace_array *tr) { + atomic_dec(&trace_record_cmdline_enabled); tracer_enabled = 0; } -- cgit v1.2.3 From 72b59d67f80983f7bb587b086fb4cb1bc95263a4 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:01 +0200 Subject: x86_64: fix kernel rodata NX setting Without CONFIG_DYNAMIC_FTRACE, mark_rodata_ro() would mark a wrong number of pages as no-execute. The bug was introduced in the patch "ftrace: dont write protect kernel text". The symptom was machine reboot after a CPU hotplug. Signed-off-by: Pekka Paalanen Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/init_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 41824e776b6c..295be1d07b82 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -782,7 +782,7 @@ void mark_rodata_ro(void) * The rodata section (but not the kernel text!) should also be * not-executable. */ - set_memory_nx(rodata_start, (end - start) >> PAGE_SHIFT); + set_memory_nx(rodata_start, (end - rodata_start) >> PAGE_SHIFT); rodata_test(); -- cgit v1.2.3 From 53d0aa773053ab18287781e25d52c5faf9e0e09e Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:21:01 +0200 Subject: ftrace: add logic to record overruns This patch sets up the infrastructure to record overruns of the tracing buffer. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 16 +++++++++++----- kernel/trace/trace.h | 6 +++++- 2 files changed, 16 insertions(+), 6 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 1281969103b8..b9126ef46a9e 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -609,6 +609,7 @@ void unregister_tracer(struct tracer *type) void tracing_reset(struct trace_array_cpu *data) { data->trace_idx = 0; + data->overrun = 0; data->trace_head = data->trace_tail = head_page(data); data->trace_head_idx = 0; data->trace_tail_idx = 0; @@ -750,6 +751,7 @@ tracing_get_trace_entry(struct trace_array *tr, struct trace_array_cpu *data) if (data->trace_head == data->trace_tail && idx_next == data->trace_tail_idx) { /* overrun */ + data->overrun++; data->trace_tail_idx++; if (data->trace_tail_idx >= ENTRIES_PER_PAGE) { data->trace_tail = @@ -2353,8 +2355,6 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, { struct trace_iterator *iter = filp->private_data; struct trace_array_cpu *data; - struct trace_array *tr = iter->tr; - struct tracer *tracer = iter->trace; static cpumask_t mask; static int start; unsigned long flags; @@ -2433,10 +2433,11 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, if (cnt >= PAGE_SIZE) cnt = PAGE_SIZE - 1; - memset(iter, 0, sizeof(*iter)); - iter->tr = tr; - iter->trace = tracer; + /* reset all but tr, trace, and overruns */ iter->pos = -1; + memset(&iter->seq, 0, + sizeof(struct trace_iterator) - + offsetof(struct trace_iterator, seq)); /* * We need to stop all tracing on all CPUS to read the @@ -2465,6 +2466,11 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, for_each_cpu_mask(cpu, mask) { data = iter->tr->data[cpu]; __raw_spin_lock(&data->lock); + + if (data->overrun > iter->last_overrun[cpu]) + iter->overrun[cpu] += + data->overrun - iter->last_overrun[cpu]; + iter->last_overrun[cpu] = data->overrun; } while (find_next_entry_inc(iter) != NULL) { diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 8991c5efcc74..c1ec134ac356 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -97,6 +97,7 @@ struct trace_array_cpu { void *trace_head; /* producer */ void *trace_tail; /* consumer */ unsigned long trace_idx; + unsigned long overrun; unsigned long saved_latency; unsigned long critical_start; unsigned long critical_end; @@ -157,10 +158,13 @@ struct trace_seq { * results to users and which routines might sleep, etc: */ struct trace_iterator { - struct trace_seq seq; struct trace_array *tr; struct tracer *trace; + long last_overrun[NR_CPUS]; + long overrun[NR_CPUS]; + /* The below is zeroed out in pipe_read */ + struct trace_seq seq; struct trace_entry *ent; int cpu; -- cgit v1.2.3 From 107bad8bef5ab2c3a3bff7648c18c9dc3abdc13b Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:21:01 +0200 Subject: ftrace: add trace pipe header pluggin This patch adds a method for open_pipe and open_read to the pluggins so that they can add a header to the trace pipe call. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 38 +++++++++++++++++++++++++++++++------- kernel/trace/trace.h | 5 +++++ 2 files changed, 36 insertions(+), 7 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b9126ef46a9e..32f9106d612c 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2307,11 +2307,15 @@ static int tracing_open_pipe(struct inode *inode, struct file *filp) if (!iter) return -ENOMEM; + mutex_lock(&trace_types_lock); iter->tr = &global_trace; iter->trace = current_trace; - filp->private_data = iter; + if (iter->trace->pipe_open) + iter->trace->pipe_open(iter); + mutex_unlock(&trace_types_lock); + return 0; } @@ -2380,13 +2384,24 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, return cnt; } + mutex_lock(&trace_types_lock); + if (iter->trace->read) { + ret = iter->trace->read(iter, filp, ubuf, cnt, ppos); + if (ret) { + read = ret; + goto out; + } + } + trace_seq_reset(&iter->seq); start = 0; while (trace_empty(iter)) { - if ((filp->f_flags & O_NONBLOCK)) - return -EAGAIN; + if ((filp->f_flags & O_NONBLOCK)) { + read = -EAGAIN; + goto out; + } /* * This is a make-shift waitqueue. The reason we don't use @@ -2400,16 +2415,22 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, set_current_state(TASK_INTERRUPTIBLE); iter->tr->waiter = current; + mutex_unlock(&trace_types_lock); + /* sleep for one second, and try again. */ schedule_timeout(HZ); + mutex_lock(&trace_types_lock); + iter->tr->waiter = NULL; - if (signal_pending(current)) - return -EINTR; + if (signal_pending(current)) { + read = -EINTR; + goto out; + } if (iter->trace != current_trace) - return 0; + goto out; /* * We block until we read something and tracing is disabled. @@ -2428,7 +2449,7 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, /* stop when tracing is finished */ if (trace_empty(iter)) - return 0; + goto out; if (cnt >= PAGE_SIZE) cnt = PAGE_SIZE - 1; @@ -2518,6 +2539,9 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, if (ret) read = -EFAULT; +out: + mutex_unlock(&trace_types_lock); + return read; } diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index c1ec134ac356..ee53d706066f 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -135,9 +135,13 @@ struct tracer { void (*init)(struct trace_array *tr); void (*reset)(struct trace_array *tr); void (*open)(struct trace_iterator *iter); + void (*pipe_open)(struct trace_iterator *iter); void (*close)(struct trace_iterator *iter); void (*start)(struct trace_iterator *iter); void (*stop)(struct trace_iterator *iter); + ssize_t (*read)(struct trace_iterator *iter, + struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos); void (*ctrl_update)(struct trace_array *tr); #ifdef CONFIG_FTRACE_STARTUP_TEST int (*selftest)(struct tracer *trace, @@ -160,6 +164,7 @@ struct trace_seq { struct trace_iterator { struct trace_array *tr; struct tracer *trace; + void *private; long last_overrun[NR_CPUS]; long overrun[NR_CPUS]; -- cgit v1.2.3 From 2f1dafe50cc4e58a239fd81bd47f87f32042a1ee Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:01 +0200 Subject: x86: fix SMP alternatives: use mutex instead of spinlock, text_poke is sleepable text_poke is sleepable. The original fix by Mathieu Desnoyers . Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/alternative.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index de240ba2e288..2763cb37b553 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -1,6 +1,6 @@ #include #include -#include +#include #include #include #include @@ -279,7 +279,7 @@ struct smp_alt_module { struct list_head next; }; static LIST_HEAD(smp_alt_modules); -static DEFINE_SPINLOCK(smp_alt); +static DEFINE_MUTEX(smp_alt); static int smp_mode = 1; /* protected by smp_alt */ void alternatives_smp_module_add(struct module *mod, char *name, @@ -312,12 +312,12 @@ void alternatives_smp_module_add(struct module *mod, char *name, __func__, smp->locks, smp->locks_end, smp->text, smp->text_end, smp->name); - spin_lock(&smp_alt); + mutex_lock(&smp_alt); list_add_tail(&smp->next, &smp_alt_modules); if (boot_cpu_has(X86_FEATURE_UP)) alternatives_smp_unlock(smp->locks, smp->locks_end, smp->text, smp->text_end); - spin_unlock(&smp_alt); + mutex_unlock(&smp_alt); } void alternatives_smp_module_del(struct module *mod) @@ -327,17 +327,17 @@ void alternatives_smp_module_del(struct module *mod) if (smp_alt_once || noreplace_smp) return; - spin_lock(&smp_alt); + mutex_lock(&smp_alt); list_for_each_entry(item, &smp_alt_modules, next) { if (mod != item->mod) continue; list_del(&item->next); - spin_unlock(&smp_alt); + mutex_unlock(&smp_alt); DPRINTK("%s: %s\n", __func__, item->name); kfree(item); return; } - spin_unlock(&smp_alt); + mutex_unlock(&smp_alt); } void alternatives_smp_switch(int smp) @@ -359,7 +359,7 @@ void alternatives_smp_switch(int smp) return; BUG_ON(!smp && (num_online_cpus() > 1)); - spin_lock(&smp_alt); + mutex_lock(&smp_alt); /* * Avoid unnecessary switches because it forces JIT based VMs to @@ -383,7 +383,7 @@ void alternatives_smp_switch(int smp) mod->text, mod->text_end); } smp_mode = smp; - spin_unlock(&smp_alt); + mutex_unlock(&smp_alt); } #endif -- cgit v1.2.3 From 4823ed7eadf35e4b57ce581327e21d39585f1f32 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:21:01 +0200 Subject: ftrace: fix setting of pos in read_pipe In resetting the iterator in read_pipe, the reset of pos was postitioned in the wrong location with respect to the memset operation. The current code sets pos, incorrectly, to zero. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 32f9106d612c..49e16630628a 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2455,10 +2455,10 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, cnt = PAGE_SIZE - 1; /* reset all but tr, trace, and overruns */ - iter->pos = -1; memset(&iter->seq, 0, sizeof(struct trace_iterator) - offsetof(struct trace_iterator, seq)); + iter->pos = -1; /* * We need to stop all tracing on all CPUS to read the -- cgit v1.2.3 From 9fe068e92f6290e89e19adc521441661a1229f00 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:21:02 +0200 Subject: ftrace: trace faster Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 49e16630628a..ca0d6ff74c11 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2417,8 +2417,8 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, mutex_unlock(&trace_types_lock); - /* sleep for one second, and try again. */ - schedule_timeout(HZ); + /* sleep for 100 msecs, and try again. */ + schedule_timeout(HZ/10); mutex_lock(&trace_types_lock); -- cgit v1.2.3 From a4feb8348b62fe76a63cdb5569f5c920f5283c06 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:21:02 +0200 Subject: ftrace: special stacktrace Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 47 ++++++++++++++++++++++++----------------------- 1 file changed, 24 insertions(+), 23 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ca0d6ff74c11..c232d8248a09 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -808,29 +808,6 @@ ftrace(struct trace_array *tr, struct trace_array_cpu *data, trace_function(tr, data, ip, parent_ip, flags); } -void -__trace_special(void *__tr, void *__data, - unsigned long arg1, unsigned long arg2, unsigned long arg3) -{ - struct trace_array_cpu *data = __data; - struct trace_array *tr = __tr; - struct trace_entry *entry; - unsigned long irq_flags; - - raw_local_irq_save(irq_flags); - __raw_spin_lock(&data->lock); - entry = tracing_get_trace_entry(tr, data); - tracing_generic_entry_update(entry, 0); - entry->type = TRACE_SPECIAL; - entry->special.arg1 = arg1; - entry->special.arg2 = arg2; - entry->special.arg3 = arg3; - __raw_spin_unlock(&data->lock); - raw_local_irq_restore(irq_flags); - - trace_wake_up(); -} - void __trace_stack(struct trace_array *tr, struct trace_array_cpu *data, unsigned long flags, @@ -856,6 +833,30 @@ void __trace_stack(struct trace_array *tr, save_stack_trace(&trace); } +void +__trace_special(void *__tr, void *__data, + unsigned long arg1, unsigned long arg2, unsigned long arg3) +{ + struct trace_array_cpu *data = __data; + struct trace_array *tr = __tr; + struct trace_entry *entry; + unsigned long irq_flags; + + raw_local_irq_save(irq_flags); + __raw_spin_lock(&data->lock); + entry = tracing_get_trace_entry(tr, data); + tracing_generic_entry_update(entry, 0); + entry->type = TRACE_SPECIAL; + entry->special.arg1 = arg1; + entry->special.arg2 = arg2; + entry->special.arg3 = arg3; + __trace_stack(tr, data, irq_flags, 4); + __raw_spin_unlock(&data->lock); + raw_local_irq_restore(irq_flags); + + trace_wake_up(); +} + void tracing_sched_switch_trace(struct trace_array *tr, struct trace_array_cpu *data, -- cgit v1.2.3 From 2bb6f8d6389cbfadd657e7dc069f6986abf35e4f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:21:02 +0200 Subject: ftrace: use raw_smp_processor_id for mcount functions Due to debug hooks in the kernel that can change the way smp_processor_id works, use raw_smp_processor_id in mcount called functions (namely ftrace_record_ip). Currently we annotate most debug functions from calling mcount, but we should not rely on that to prevent kernel lockups. This patch uses the raw_smp_processor_id to prevent a recusive crash that can happen if a debug hook in smp_processor_id calls mcount. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/ftrace.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 40f64f7cd850..af5ad8949abb 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -267,6 +267,7 @@ ftrace_record_ip(unsigned long ip) unsigned long key; int resched; int atomic; + int cpu; if (!ftrace_enabled || ftrace_disabled) return; @@ -274,9 +275,15 @@ ftrace_record_ip(unsigned long ip) resched = need_resched(); preempt_disable_notrace(); - /* We simply need to protect against recursion */ - __get_cpu_var(ftrace_shutdown_disable_cpu)++; - if (__get_cpu_var(ftrace_shutdown_disable_cpu) != 1) + /* + * We simply need to protect against recursion. + * Use the the raw version of smp_processor_id and not + * __get_cpu_var which can call debug hooks that can + * cause a recursive crash here. + */ + cpu = raw_smp_processor_id(); + per_cpu(ftrace_shutdown_disable_cpu, cpu)++; + if (per_cpu(ftrace_shutdown_disable_cpu, cpu) != 1) goto out; if (unlikely(ftrace_record_suspend)) @@ -317,7 +324,7 @@ ftrace_record_ip(unsigned long ip) out_unlock: spin_unlock_irqrestore(&ftrace_shutdown_lock, flags); out: - __get_cpu_var(ftrace_shutdown_disable_cpu)--; + per_cpu(ftrace_shutdown_disable_cpu, cpu)--; /* prevent recursion with scheduler */ if (resched) -- cgit v1.2.3 From 6c6c27969a4c6024e6c8838829546c02aaddca18 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:02 +0200 Subject: ftrace: add readpos to struct trace_seq; add trace_seq_to_user() Refactor code from tracing_read_pipe() and create trace_seq_to_user(). Moved trace_seq_reset() call before iter->trace->read() call so that when all leftover data is returned, trace_seq is reset automatically. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 73 ++++++++++++++++++++++++++-------------------------- kernel/trace/trace.h | 3 +++ 2 files changed, 39 insertions(+), 37 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index c232d8248a09..82ced406aacf 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -400,6 +400,26 @@ static void trace_seq_reset(struct trace_seq *s) { s->len = 0; + s->readpos = 0; +} + +ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf, size_t cnt) +{ + int len; + int ret; + + if (s->len <= s->readpos) + return -EBUSY; + + len = s->len - s->readpos; + if (cnt > len) + cnt = len; + ret = copy_to_user(ubuf, s->buffer + s->readpos, cnt); + if (ret) + return -EFAULT; + + s->readpos += len; + return cnt; } static void @@ -2361,46 +2381,32 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, struct trace_iterator *iter = filp->private_data; struct trace_array_cpu *data; static cpumask_t mask; - static int start; unsigned long flags; #ifdef CONFIG_FTRACE int ftrace_save; #endif - int read = 0; int cpu; - int len; - int ret; + ssize_t sret; /* return any leftover data */ - if (iter->seq.len > start) { - len = iter->seq.len - start; - if (cnt > len) - cnt = len; - ret = copy_to_user(ubuf, iter->seq.buffer + start, cnt); - if (ret) - cnt = -EFAULT; - - start += len; + sret = trace_seq_to_user(&iter->seq, ubuf, cnt); + if (sret != -EBUSY) + return sret; + sret = 0; - return cnt; - } + trace_seq_reset(&iter->seq); mutex_lock(&trace_types_lock); if (iter->trace->read) { - ret = iter->trace->read(iter, filp, ubuf, cnt, ppos); - if (ret) { - read = ret; + sret = iter->trace->read(iter, filp, ubuf, cnt, ppos); + if (sret) goto out; - } } - trace_seq_reset(&iter->seq); - start = 0; - while (trace_empty(iter)) { if ((filp->f_flags & O_NONBLOCK)) { - read = -EAGAIN; + sret = -EAGAIN; goto out; } @@ -2426,7 +2432,7 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, iter->tr->waiter = NULL; if (signal_pending(current)) { - read = -EINTR; + sret = -EINTR; goto out; } @@ -2496,6 +2502,7 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, } while (find_next_entry_inc(iter) != NULL) { + int ret; int len = iter->seq.len; ret = print_trace_line(iter); @@ -2526,24 +2533,16 @@ tracing_read_pipe(struct file *filp, char __user *ubuf, local_irq_restore(flags); /* Now copy what we have to the user */ - read = iter->seq.len; - if (read > cnt) - read = cnt; - - ret = copy_to_user(ubuf, iter->seq.buffer, read); - - if (read < iter->seq.len) - start = read; - else + sret = trace_seq_to_user(&iter->seq, ubuf, cnt); + if (iter->seq.readpos >= iter->seq.len) trace_seq_reset(&iter->seq); - - if (ret) - read = -EFAULT; + if (sret == -EBUSY) + sret = 0; out: mutex_unlock(&trace_types_lock); - return read; + return sret; } static ssize_t diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index ee53d706066f..8845033ab49d 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -155,6 +155,7 @@ struct tracer { struct trace_seq { unsigned char buffer[PAGE_SIZE]; unsigned int len; + unsigned int readpos; }; /* @@ -301,6 +302,8 @@ extern int trace_selftest_startup_sched_switch(struct tracer *trace, extern void *head_page(struct trace_array_cpu *data); extern int trace_seq_printf(struct trace_seq *s, const char *fmt, ...); +extern ssize_t trace_seq_to_user(struct trace_seq *s, char __user *ubuf, + size_t cnt); extern long ns2usecs(cycle_t nsec); extern unsigned long trace_flags; -- cgit v1.2.3 From 3eefae994d9224fb7771a3ddb683868363c23510 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 12 May 2008 21:21:04 +0200 Subject: ftrace: limit trace entries Currently there is no protection from the root user to use up all of memory for trace buffers. If the root user allocates too many entries, the OOM killer might start kill off all tasks. This patch adds an algorith to check the following condition: pages_requested > (freeable_memory + current_trace_buffer_pages) / 4 If the above is met then the allocation fails. The above prevents more than 1/4th of freeable memory from being used by trace buffers. To determine the freeable_memory, I made determine_dirtyable_memory in mm/page-writeback.c global. Special thanks goes to Peter Zijlstra for suggesting the above calculation. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/writeback.h | 2 ++ kernel/trace/trace.c | 38 ++++++++++++++++++++++++++++++++++++++ mm/page-writeback.c | 10 +++++++--- 3 files changed, 47 insertions(+), 3 deletions(-) diff --git a/include/linux/writeback.h b/include/linux/writeback.h index f462439cc288..bd91987c065f 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -105,6 +105,8 @@ extern int vm_highmem_is_dirtyable; extern int block_dump; extern int laptop_mode; +extern unsigned long determine_dirtyable_memory(void); + extern int dirty_ratio_handler(struct ctl_table *table, int write, struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos); diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 82ced406aacf..2824cf48cdca 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -27,6 +27,7 @@ #include #include #include +#include #include @@ -51,6 +52,8 @@ static int trace_free_page(void); static int tracing_disabled = 1; +static unsigned long tracing_pages_allocated; + long ns2usecs(cycle_t nsec) { @@ -2591,12 +2594,41 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, } if (val > global_trace.entries) { + long pages_requested; + unsigned long freeable_pages; + + /* make sure we have enough memory before mapping */ + pages_requested = + (val + (ENTRIES_PER_PAGE-1)) / ENTRIES_PER_PAGE; + + /* account for each buffer (and max_tr) */ + pages_requested *= tracing_nr_buffers * 2; + + /* Check for overflow */ + if (pages_requested < 0) { + cnt = -ENOMEM; + goto out; + } + + freeable_pages = determine_dirtyable_memory(); + + /* we only allow to request 1/4 of useable memory */ + if (pages_requested > + ((freeable_pages + tracing_pages_allocated) / 4)) { + cnt = -ENOMEM; + goto out; + } + while (global_trace.entries < val) { if (trace_alloc_page()) { cnt = -ENOMEM; goto out; } + /* double check that we don't go over the known pages */ + if (tracing_pages_allocated > pages_requested) + break; } + } else { /* include the number of entries in val (inc of page entries) */ while (global_trace.entries > val + (ENTRIES_PER_PAGE - 1)) @@ -2776,6 +2808,7 @@ static int trace_alloc_page(void) struct page *page, *tmp; LIST_HEAD(pages); void *array; + unsigned pages_allocated = 0; int i; /* first allocate a page for each CPU */ @@ -2787,6 +2820,7 @@ static int trace_alloc_page(void) goto free_pages; } + pages_allocated++; page = virt_to_page(array); list_add(&page->lru, &pages); @@ -2798,6 +2832,7 @@ static int trace_alloc_page(void) "for trace buffer!\n"); goto free_pages; } + pages_allocated++; page = virt_to_page(array); list_add(&page->lru, &pages); #endif @@ -2819,6 +2854,7 @@ static int trace_alloc_page(void) SetPageLRU(page); #endif } + tracing_pages_allocated += pages_allocated; global_trace.entries += ENTRIES_PER_PAGE; return 0; @@ -2853,6 +2889,8 @@ static int trace_free_page(void) page = list_entry(p, struct page, lru); ClearPageLRU(page); list_del(&page->lru); + tracing_pages_allocated--; + tracing_pages_allocated--; __free_page(page); tracing_reset(data); diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 789b6adbef37..b38f700825fc 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -126,8 +126,6 @@ static void background_writeout(unsigned long _min_pages); static struct prop_descriptor vm_completions; static struct prop_descriptor vm_dirties; -static unsigned long determine_dirtyable_memory(void); - /* * couple the period to the dirty_ratio: * @@ -347,7 +345,13 @@ static unsigned long highmem_dirtyable_memory(unsigned long total) #endif } -static unsigned long determine_dirtyable_memory(void) +/** + * determine_dirtyable_memory - amount of memory that may be used + * + * Returns the numebr of pages that can currently be freed and used + * by the kernel for direct mappings. + */ +unsigned long determine_dirtyable_memory(void) { unsigned long x; -- cgit v1.2.3 From dc102a8fae2d0d6bf5223fc549247f2e23959ae6 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Mon, 12 May 2008 21:21:09 +0200 Subject: Markers - remove extra format argument Denys Vlasenko : > Not in this patch, but I noticed: > > #define __trace_mark(name, call_private, format, args...) \ > do { \ > static const char __mstrtab_##name[] \ > __attribute__((section("__markers_strings"))) \ > = #name "\0" format; \ > static struct marker __mark_##name \ > __attribute__((section("__markers"), aligned(8))) = \ > { __mstrtab_##name, &__mstrtab_##name[sizeof(#name)], \ > 0, 0, marker_probe_cb, \ > { __mark_empty_function, NULL}, NULL }; \ > __mark_check_format(format, ## args); \ > if (unlikely(__mark_##name.state)) { \ > (*__mark_##name.call) \ > (&__mark_##name, call_private, \ > format, ## args); \ > } \ > } while (0) > > In this call: > > (*__mark_##name.call) \ > (&__mark_##name, call_private, \ > format, ## args); \ > > you make gcc allocate duplicate format string. You can use > &__mstrtab_##name[sizeof(#name)] instead since it holds the same string, > or drop ", format," above and "const char *fmt" from here: > > void (*call)(const struct marker *mdata, /* Probe wrapper */ > void *call_private, const char *fmt, ...); > > since mdata->format is the same and all callees which need it can take it there. Very good point. I actually thought about dropping it, since it would remove an unnecessary argument from the stack. And actually, since I now have the marker_probe_cb sitting between the marker site and the callbacks, there is no API change required. Thanks :) Mathieu Signed-off-by: Mathieu Desnoyers CC: Denys Vlasenko Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/marker.h | 11 +++++------ kernel/marker.c | 30 ++++++++++++++---------------- 2 files changed, 19 insertions(+), 22 deletions(-) diff --git a/include/linux/marker.h b/include/linux/marker.h index 430f6adf9762..338533abb47b 100644 --- a/include/linux/marker.h +++ b/include/linux/marker.h @@ -44,8 +44,8 @@ struct marker { */ char state; /* Marker state. */ char ptype; /* probe type : 0 : single, 1 : multi */ - void (*call)(const struct marker *mdata, /* Probe wrapper */ - void *call_private, const char *fmt, ...); + /* Probe wrapper */ + void (*call)(const struct marker *mdata, void *call_private, ...); struct marker_probe_closure single; struct marker_probe_closure *multi; } __attribute__((aligned(8))); @@ -72,8 +72,7 @@ struct marker { __mark_check_format(format, ## args); \ if (unlikely(__mark_##name.state)) { \ (*__mark_##name.call) \ - (&__mark_##name, call_private, \ - format, ## args); \ + (&__mark_##name, call_private, ## args);\ } \ } while (0) @@ -117,9 +116,9 @@ static inline void __printf(1, 2) ___mark_check_format(const char *fmt, ...) extern marker_probe_func __mark_empty_function; extern void marker_probe_cb(const struct marker *mdata, - void *call_private, const char *fmt, ...); + void *call_private, ...); extern void marker_probe_cb_noarg(const struct marker *mdata, - void *call_private, const char *fmt, ...); + void *call_private, ...); /* * Connect a probe to a marker. diff --git a/kernel/marker.c b/kernel/marker.c index b5a9fe1d50d5..1abfb923b761 100644 --- a/kernel/marker.c +++ b/kernel/marker.c @@ -55,8 +55,8 @@ static DEFINE_MUTEX(markers_mutex); struct marker_entry { struct hlist_node hlist; char *format; - void (*call)(const struct marker *mdata, /* Probe wrapper */ - void *call_private, const char *fmt, ...); + /* Probe wrapper */ + void (*call)(const struct marker *mdata, void *call_private, ...); struct marker_probe_closure single; struct marker_probe_closure *multi; int refcount; /* Number of times armed. 0 if disarmed. */ @@ -91,15 +91,13 @@ EXPORT_SYMBOL_GPL(__mark_empty_function); * marker_probe_cb Callback that prepares the variable argument list for probes. * @mdata: pointer of type struct marker * @call_private: caller site private data - * @fmt: format string * @...: Variable argument list. * * Since we do not use "typical" pointer based RCU in the 1 argument case, we * need to put a full smp_rmb() in this branch. This is why we do not use * rcu_dereference() for the pointer read. */ -void marker_probe_cb(const struct marker *mdata, void *call_private, - const char *fmt, ...) +void marker_probe_cb(const struct marker *mdata, void *call_private, ...) { va_list args; char ptype; @@ -120,8 +118,9 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, /* Must read the ptr before private data. They are not data * dependant, so we put an explicit smp_rmb() here. */ smp_rmb(); - va_start(args, fmt); - func(mdata->single.probe_private, call_private, fmt, &args); + va_start(args, call_private); + func(mdata->single.probe_private, call_private, mdata->format, + &args); va_end(args); } else { struct marker_probe_closure *multi; @@ -136,9 +135,9 @@ void marker_probe_cb(const struct marker *mdata, void *call_private, smp_read_barrier_depends(); multi = mdata->multi; for (i = 0; multi[i].func; i++) { - va_start(args, fmt); - multi[i].func(multi[i].probe_private, call_private, fmt, - &args); + va_start(args, call_private); + multi[i].func(multi[i].probe_private, call_private, + mdata->format, &args); va_end(args); } } @@ -150,13 +149,11 @@ EXPORT_SYMBOL_GPL(marker_probe_cb); * marker_probe_cb Callback that does not prepare the variable argument list. * @mdata: pointer of type struct marker * @call_private: caller site private data - * @fmt: format string * @...: Variable argument list. * * Should be connected to markers "MARK_NOARGS". */ -void marker_probe_cb_noarg(const struct marker *mdata, - void *call_private, const char *fmt, ...) +void marker_probe_cb_noarg(const struct marker *mdata, void *call_private, ...) { va_list args; /* not initialized */ char ptype; @@ -172,7 +169,8 @@ void marker_probe_cb_noarg(const struct marker *mdata, /* Must read the ptr before private data. They are not data * dependant, so we put an explicit smp_rmb() here. */ smp_rmb(); - func(mdata->single.probe_private, call_private, fmt, &args); + func(mdata->single.probe_private, call_private, mdata->format, + &args); } else { struct marker_probe_closure *multi; int i; @@ -186,8 +184,8 @@ void marker_probe_cb_noarg(const struct marker *mdata, smp_read_barrier_depends(); multi = mdata->multi; for (i = 0; multi[i].func; i++) - multi[i].func(multi[i].probe_private, call_private, fmt, - &args); + multi[i].func(multi[i].probe_private, call_private, + mdata->format, &args); } preempt_enable(); } -- cgit v1.2.3 From 0aa977f592f17004f9d1d545f2e1bb9ea71896c3 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Mon, 12 May 2008 21:21:10 +0200 Subject: Markers - define non optimized marker To support the forthcoming "immediate values" marker optimization, we must have a way to declare markers in few code paths that does not use instruction modification based enable. This will be the case of printk(), some traps and eventually lockdep instrumentation. Changelog : - Fix reversed boolean logic of "generic". Signed-off-by: Mathieu Desnoyers Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/marker.h | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) diff --git a/include/linux/marker.h b/include/linux/marker.h index 338533abb47b..1290653f9241 100644 --- a/include/linux/marker.h +++ b/include/linux/marker.h @@ -58,8 +58,12 @@ struct marker { * Make sure the alignment of the structure in the __markers section will * not add unwanted padding between the beginning of the section and the * structure. Force alignment to the same alignment as the section start. + * + * The "generic" argument controls which marker enabling mechanism must be used. + * If generic is true, a variable read is used. + * If generic is false, immediate values are used. */ -#define __trace_mark(name, call_private, format, args...) \ +#define __trace_mark(generic, name, call_private, format, args...) \ do { \ static const char __mstrtab_##name[] \ __attribute__((section("__markers_strings"))) \ @@ -79,7 +83,7 @@ struct marker { extern void marker_update_probe_range(struct marker *begin, struct marker *end); #else /* !CONFIG_MARKERS */ -#define __trace_mark(name, call_private, format, args...) \ +#define __trace_mark(generic, name, call_private, format, args...) \ __mark_check_format(format, ## args) static inline void marker_update_probe_range(struct marker *begin, struct marker *end) @@ -87,15 +91,30 @@ static inline void marker_update_probe_range(struct marker *begin, #endif /* CONFIG_MARKERS */ /** - * trace_mark - Marker + * trace_mark - Marker using code patching * @name: marker name, not quoted. * @format: format string * @args...: variable argument list * - * Places a marker. + * Places a marker using optimized code patching technique (imv_read()) + * to be enabled when immediate values are present. */ #define trace_mark(name, format, args...) \ - __trace_mark(name, NULL, format, ## args) + __trace_mark(0, name, NULL, format, ## args) + +/** + * _trace_mark - Marker using variable read + * @name: marker name, not quoted. + * @format: format string + * @args...: variable argument list + * + * Places a marker using a standard memory read (_imv_read()) to be + * enabled. Should be used for markers in code paths where instruction + * modification based enabling is not welcome. (__init and __exit functions, + * lockdep, some traps, printk). + */ +#define _trace_mark(name, format, args...) \ + __trace_mark(1, name, NULL, format, ## args) /** * MARK_NOARGS - Format string for a marker with no argument. -- cgit v1.2.3 From 5b82a1b08a00b2adca3d9dd9777efff40b7aaaa1 Mon Sep 17 00:00:00 2001 From: Mathieu Desnoyers Date: Mon, 12 May 2008 21:21:10 +0200 Subject: Port ftrace to markers Porting ftrace to the marker infrastructure. Don't need to chain to the wakeup tracer from the sched tracer, because markers support multiple probes connected. Signed-off-by: Mathieu Desnoyers CC: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/sched.h | 32 ------- kernel/sched.c | 14 +++- kernel/trace/trace.h | 20 +---- kernel/trace/trace_sched_switch.c | 171 +++++++++++++++++++++++++++++++------- kernel/trace/trace_sched_wakeup.c | 106 +++++++++++++++++++++-- 5 files changed, 255 insertions(+), 88 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 360ca99033d2..c0b1c69b55ce 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2131,38 +2131,6 @@ __trace_special(void *__tr, void *__data, } #endif -#ifdef CONFIG_CONTEXT_SWITCH_TRACER -extern void -ftrace_ctx_switch(void *rq, struct task_struct *prev, struct task_struct *next); -extern void -ftrace_wake_up_task(void *rq, struct task_struct *wakee, - struct task_struct *curr); -extern void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data); -extern void -ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3); -#else -static inline void -ftrace_ctx_switch(void *rq, struct task_struct *prev, struct task_struct *next) -{ -} -static inline void -sched_trace_special(unsigned long p1, unsigned long p2, unsigned long p3) -{ -} -static inline void -ftrace_wake_up_task(void *rq, struct task_struct *wakee, - struct task_struct *curr) -{ -} -static inline void ftrace_all_fair_tasks(void *__rq, void *__tr, void *__data) -{ -} -static inline void -ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) -{ -} -#endif - extern long sched_setaffinity(pid_t pid, const cpumask_t *new_mask); extern long sched_getaffinity(pid_t pid, cpumask_t *mask); diff --git a/kernel/sched.c b/kernel/sched.c index ad95cca4e42e..e2e985eeee78 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2500,7 +2500,9 @@ out_activate: success = 1; out_running: - ftrace_wake_up_task(rq, p, rq->curr); + trace_mark(kernel_sched_wakeup, + "pid %d state %ld ## rq %p task %p rq->curr %p", + p->pid, p->state, rq, p, rq->curr); check_preempt_curr(rq, p); p->state = TASK_RUNNING; @@ -2631,7 +2633,9 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags) p->sched_class->task_new(rq, p); inc_nr_running(rq); } - ftrace_wake_up_task(rq, p, rq->curr); + trace_mark(kernel_sched_wakeup_new, + "pid %d state %ld ## rq %p task %p rq->curr %p", + p->pid, p->state, rq, p, rq->curr); check_preempt_curr(rq, p); #ifdef CONFIG_SMP if (p->sched_class->task_wake_up) @@ -2804,7 +2808,11 @@ context_switch(struct rq *rq, struct task_struct *prev, struct mm_struct *mm, *oldmm; prepare_task_switch(rq, prev, next); - ftrace_ctx_switch(rq, prev, next); + trace_mark(kernel_sched_schedule, + "prev_pid %d next_pid %d prev_state %ld " + "## rq %p prev %p next %p", + prev->pid, next->pid, prev->state, + rq, prev, next); mm = next->mm; oldmm = prev->active_mm; /* diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 8845033ab49d..f5de0601b408 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -234,25 +234,10 @@ void update_max_tr_single(struct trace_array *tr, extern cycle_t ftrace_now(int cpu); -#ifdef CONFIG_SCHED_TRACER -extern void -wakeup_sched_switch(struct task_struct *prev, struct task_struct *next); -extern void -wakeup_sched_wakeup(struct task_struct *wakee, struct task_struct *curr); -#else -static inline void -wakeup_sched_switch(struct task_struct *prev, struct task_struct *next) -{ -} -static inline void -wakeup_sched_wakeup(struct task_struct *wakee, struct task_struct *curr) -{ -} -#endif - #ifdef CONFIG_CONTEXT_SWITCH_TRACER typedef void (*tracer_switch_func_t)(void *private, + void *__rq, struct task_struct *prev, struct task_struct *next); @@ -262,9 +247,6 @@ struct tracer_switch_ops { struct tracer_switch_ops *next; }; -extern int register_tracer_switch(struct tracer_switch_ops *ops); -extern int unregister_tracer_switch(struct tracer_switch_ops *ops); - #endif /* CONFIG_CONTEXT_SWITCH_TRACER */ #ifdef CONFIG_DYNAMIC_FTRACE diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index a3376478fc2c..d25ffa5eaf2b 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -16,11 +16,14 @@ static struct trace_array *ctx_trace; static int __read_mostly tracer_enabled; +static atomic_t sched_ref; static void -ctx_switch_func(void *__rq, struct task_struct *prev, struct task_struct *next) +sched_switch_func(void *private, void *__rq, struct task_struct *prev, + struct task_struct *next) { - struct trace_array *tr = ctx_trace; + struct trace_array **ptr = private; + struct trace_array *tr = *ptr; struct trace_array_cpu *data; unsigned long flags; long disabled; @@ -41,10 +44,40 @@ ctx_switch_func(void *__rq, struct task_struct *prev, struct task_struct *next) local_irq_restore(flags); } +static notrace void +sched_switch_callback(void *probe_data, void *call_data, + const char *format, va_list *args) +{ + struct task_struct *prev; + struct task_struct *next; + struct rq *__rq; + + if (!atomic_read(&sched_ref)) + return; + + /* skip prev_pid %d next_pid %d prev_state %ld */ + (void)va_arg(*args, int); + (void)va_arg(*args, int); + (void)va_arg(*args, long); + __rq = va_arg(*args, typeof(__rq)); + prev = va_arg(*args, typeof(prev)); + next = va_arg(*args, typeof(next)); + + tracing_record_cmdline(prev); + + /* + * If tracer_switch_func only points to the local + * switch func, it still needs the ptr passed to it. + */ + sched_switch_func(probe_data, __rq, prev, next); +} + static void -wakeup_func(void *__rq, struct task_struct *wakee, struct task_struct *curr) +wakeup_func(void *private, void *__rq, struct task_struct *wakee, struct + task_struct *curr) { - struct trace_array *tr = ctx_trace; + struct trace_array **ptr = private; + struct trace_array *tr = *ptr; struct trace_array_cpu *data; unsigned long flags; long disabled; @@ -67,35 +100,29 @@ wakeup_func(void *__rq, struct task_struct *wakee, struct task_struct *curr) local_irq_restore(flags); } -void -ftrace_ctx_switch(void *__rq, struct task_struct *prev, - struct task_struct *next) +static notrace void +wake_up_callback(void *probe_data, void *call_data, + const char *format, va_list *args) { - if (unlikely(atomic_read(&trace_record_cmdline_enabled))) - tracing_record_cmdline(prev); + struct task_struct *curr; + struct task_struct *task; + struct rq *__rq; - /* - * If tracer_switch_func only points to the local - * switch func, it still needs the ptr passed to it. - */ - ctx_switch_func(__rq, prev, next); + if (likely(!tracer_enabled)) + return; - /* - * Chain to the wakeup tracer (this is a NOP if disabled): - */ - wakeup_sched_switch(prev, next); -} + /* Skip pid %d state %ld */ + (void)va_arg(*args, int); + (void)va_arg(*args, long); + /* now get the meat: "rq %p task %p rq->curr %p" */ + __rq = va_arg(*args, typeof(__rq)); + task = va_arg(*args, typeof(task)); + curr = va_arg(*args, typeof(curr)); -void -ftrace_wake_up_task(void *__rq, struct task_struct *wakee, - struct task_struct *curr) -{ - wakeup_func(__rq, wakee, curr); + tracing_record_cmdline(task); + tracing_record_cmdline(curr); - /* - * Chain to the wakeup tracer (this is a NOP if disabled): - */ - wakeup_sched_wakeup(wakee, curr); + wakeup_func(probe_data, __rq, task, curr); } void @@ -132,15 +159,95 @@ static void sched_switch_reset(struct trace_array *tr) tracing_reset(tr->data[cpu]); } +static int tracing_sched_register(void) +{ + int ret; + + ret = marker_probe_register("kernel_sched_wakeup", + "pid %d state %ld ## rq %p task %p rq->curr %p", + wake_up_callback, + &ctx_trace); + if (ret) { + pr_info("wakeup trace: Couldn't add marker" + " probe to kernel_sched_wakeup\n"); + return ret; + } + + ret = marker_probe_register("kernel_sched_wakeup_new", + "pid %d state %ld ## rq %p task %p rq->curr %p", + wake_up_callback, + &ctx_trace); + if (ret) { + pr_info("wakeup trace: Couldn't add marker" + " probe to kernel_sched_wakeup_new\n"); + goto fail_deprobe; + } + + ret = marker_probe_register("kernel_sched_schedule", + "prev_pid %d next_pid %d prev_state %ld " + "## rq %p prev %p next %p", + sched_switch_callback, + &ctx_trace); + if (ret) { + pr_info("sched trace: Couldn't add marker" + " probe to kernel_sched_schedule\n"); + goto fail_deprobe_wake_new; + } + + return ret; +fail_deprobe_wake_new: + marker_probe_unregister("kernel_sched_wakeup_new", + wake_up_callback, + &ctx_trace); +fail_deprobe: + marker_probe_unregister("kernel_sched_wakeup", + wake_up_callback, + &ctx_trace); + return ret; +} + +static void tracing_sched_unregister(void) +{ + marker_probe_unregister("kernel_sched_schedule", + sched_switch_callback, + &ctx_trace); + marker_probe_unregister("kernel_sched_wakeup_new", + wake_up_callback, + &ctx_trace); + marker_probe_unregister("kernel_sched_wakeup", + wake_up_callback, + &ctx_trace); +} + +void tracing_start_sched_switch(void) +{ + long ref; + + ref = atomic_inc_return(&sched_ref); + if (ref == 1) + tracing_sched_register(); +} + +void tracing_stop_sched_switch(void) +{ + long ref; + + ref = atomic_dec_and_test(&sched_ref); + if (ref) + tracing_sched_unregister(); +} + static void start_sched_trace(struct trace_array *tr) { sched_switch_reset(tr); atomic_inc(&trace_record_cmdline_enabled); tracer_enabled = 1; + tracing_start_sched_switch(); } static void stop_sched_trace(struct trace_array *tr) { + tracing_stop_sched_switch(); atomic_dec(&trace_record_cmdline_enabled); tracer_enabled = 0; } @@ -181,6 +288,14 @@ static struct tracer sched_switch_trace __read_mostly = __init static int init_sched_switch_trace(void) { + int ret = 0; + + if (atomic_read(&sched_ref)) + ret = tracing_sched_register(); + if (ret) { + pr_info("error registering scheduler trace\n"); + return ret; + } return register_tracer(&sched_switch_trace); } device_initcall(init_sched_switch_trace); diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 5948011006bc..5d2fb48e47f8 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "trace.h" @@ -44,11 +45,13 @@ static int report_latency(cycle_t delta) return 1; } -void -wakeup_sched_switch(struct task_struct *prev, struct task_struct *next) +static void notrace +wakeup_sched_switch(void *private, void *rq, struct task_struct *prev, + struct task_struct *next) { unsigned long latency = 0, t0 = 0, t1 = 0; - struct trace_array *tr = wakeup_trace; + struct trace_array **ptr = private; + struct trace_array *tr = *ptr; struct trace_array_cpu *data; cycle_t T0, T1, delta; unsigned long flags; @@ -113,6 +116,31 @@ out: atomic_dec(&tr->data[cpu]->disabled); } +static notrace void +sched_switch_callback(void *probe_data, void *call_data, + const char *format, va_list *args) +{ + struct task_struct *prev; + struct task_struct *next; + struct rq *__rq; + + /* skip prev_pid %d next_pid %d prev_state %ld */ + (void)va_arg(*args, int); + (void)va_arg(*args, int); + (void)va_arg(*args, long); + __rq = va_arg(*args, typeof(__rq)); + prev = va_arg(*args, typeof(prev)); + next = va_arg(*args, typeof(next)); + + tracing_record_cmdline(prev); + + /* + * If tracer_switch_func only points to the local + * switch func, it still needs the ptr passed to it. + */ + wakeup_sched_switch(probe_data, __rq, prev, next); +} + static void __wakeup_reset(struct trace_array *tr) { struct trace_array_cpu *data; @@ -188,19 +216,68 @@ out: atomic_dec(&tr->data[cpu]->disabled); } -void wakeup_sched_wakeup(struct task_struct *wakee, struct task_struct *curr) +static notrace void +wake_up_callback(void *probe_data, void *call_data, + const char *format, va_list *args) { + struct trace_array **ptr = probe_data; + struct trace_array *tr = *ptr; + struct task_struct *curr; + struct task_struct *task; + struct rq *__rq; + if (likely(!tracer_enabled)) return; + /* Skip pid %d state %ld */ + (void)va_arg(*args, int); + (void)va_arg(*args, long); + /* now get the meat: "rq %p task %p rq->curr %p" */ + __rq = va_arg(*args, typeof(__rq)); + task = va_arg(*args, typeof(task)); + curr = va_arg(*args, typeof(curr)); + + tracing_record_cmdline(task); tracing_record_cmdline(curr); - tracing_record_cmdline(wakee); - wakeup_check_start(wakeup_trace, wakee, curr); + wakeup_check_start(tr, task, curr); } static void start_wakeup_tracer(struct trace_array *tr) { + int ret; + + ret = marker_probe_register("kernel_sched_wakeup", + "pid %d state %ld ## rq %p task %p rq->curr %p", + wake_up_callback, + &wakeup_trace); + if (ret) { + pr_info("wakeup trace: Couldn't add marker" + " probe to kernel_sched_wakeup\n"); + return; + } + + ret = marker_probe_register("kernel_sched_wakeup_new", + "pid %d state %ld ## rq %p task %p rq->curr %p", + wake_up_callback, + &wakeup_trace); + if (ret) { + pr_info("wakeup trace: Couldn't add marker" + " probe to kernel_sched_wakeup_new\n"); + goto fail_deprobe; + } + + ret = marker_probe_register("kernel_sched_schedule", + "prev_pid %d next_pid %d prev_state %ld " + "## rq %p prev %p next %p", + sched_switch_callback, + &wakeup_trace); + if (ret) { + pr_info("sched trace: Couldn't add marker" + " probe to kernel_sched_schedule\n"); + goto fail_deprobe_wake_new; + } + wakeup_reset(tr); /* @@ -215,11 +292,28 @@ static void start_wakeup_tracer(struct trace_array *tr) tracer_enabled = 1; return; +fail_deprobe_wake_new: + marker_probe_unregister("kernel_sched_wakeup_new", + wake_up_callback, + &wakeup_trace); +fail_deprobe: + marker_probe_unregister("kernel_sched_wakeup", + wake_up_callback, + &wakeup_trace); } static void stop_wakeup_tracer(struct trace_array *tr) { tracer_enabled = 0; + marker_probe_unregister("kernel_sched_schedule", + sched_switch_callback, + &wakeup_trace); + marker_probe_unregister("kernel_sched_wakeup_new", + wake_up_callback, + &wakeup_trace); + marker_probe_unregister("kernel_sched_wakeup", + wake_up_callback, + &wakeup_trace); } static void wakeup_tracer_init(struct trace_array *tr) -- cgit v1.2.3 From 74f4e369fc5b52433ad824cef32d3bf1304549be Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:21:15 +0200 Subject: ftrace: stacktrace fix Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 8 ++++++++ kernel/semaphore.c | 2 ++ kernel/trace/trace.c | 4 ++-- kernel/trace/trace.h | 2 +- 4 files changed, 13 insertions(+), 3 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 0d3714e7110b..017ab44d572a 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -120,4 +120,12 @@ static inline void tracer_disable(void) # define trace_preempt_off(a0, a1) do { } while (0) #endif +#ifdef CONFIG_CONTEXT_SWITCH_TRACER +extern void +ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3); +#else +static inline void +ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) { } +#endif + #endif /* _LINUX_FTRACE_H */ diff --git a/kernel/semaphore.c b/kernel/semaphore.c index 5c2942e768cd..1a064adab658 100644 --- a/kernel/semaphore.c +++ b/kernel/semaphore.c @@ -31,6 +31,7 @@ #include #include #include +#include static noinline void __down(struct semaphore *sem); static noinline int __down_interruptible(struct semaphore *sem); @@ -53,6 +54,7 @@ void down(struct semaphore *sem) { unsigned long flags; + ftrace_special(sem->count, 0, __LINE__); spin_lock_irqsave(&sem->lock, flags); if (likely(sem->count > 0)) sem->count--; diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 2824cf48cdca..3271916ff033 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -901,7 +901,7 @@ tracing_sched_switch_trace(struct trace_array *tr, entry->ctx.next_pid = next->pid; entry->ctx.next_prio = next->prio; entry->ctx.next_state = next->state; - __trace_stack(tr, data, flags, 4); + __trace_stack(tr, data, flags, 5); __raw_spin_unlock(&data->lock); raw_local_irq_restore(irq_flags); } @@ -927,7 +927,7 @@ tracing_sched_wakeup_trace(struct trace_array *tr, entry->ctx.next_pid = wakee->pid; entry->ctx.next_prio = wakee->prio; entry->ctx.next_state = wakee->state; - __trace_stack(tr, data, flags, 5); + __trace_stack(tr, data, flags, 6); __raw_spin_unlock(&data->lock); raw_local_irq_restore(irq_flags); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index f5de0601b408..c460e85e94ed 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -51,7 +51,7 @@ struct special_entry { * Stack-trace entry: */ -#define FTRACE_STACK_ENTRIES 5 +#define FTRACE_STACK_ENTRIES 8 struct stack_entry { unsigned long caller[FTRACE_STACK_ENTRIES]; -- cgit v1.2.3 From aa5e5ceaf52a882a29d9b86531a20733f5116066 Mon Sep 17 00:00:00 2001 From: David Miller Date: Tue, 13 May 2008 22:06:56 -0700 Subject: ftrace: remove packed attribute on ftrace_page. It causes unaligned access traps on platforms like sparc (ftrace_page may be marked packed, but once we return a dyn_ftrace sub-object from this array to another piece of code, the "packed" part of the typing information doesn't propagate). But also, it didn't serve any purpose either. Even if packed, on 64-bit or 32-bit, it didn't give us any more dyn_ftrace entries per-page. Signed-off-by: David S. Miller Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/ftrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index af5ad8949abb..07b2a14943f8 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -177,9 +177,9 @@ static DEFINE_MUTEX(ftrace_filter_lock); struct ftrace_page { struct ftrace_page *next; - int index; + unsigned long index; struct dyn_ftrace records[]; -} __attribute__((packed)); +}; #define ENTRIES_PER_PAGE \ ((PAGE_SIZE - sizeof(struct ftrace_page)) / sizeof(struct dyn_ftrace)) -- cgit v1.2.3 From d05f5f9906740474eb768823004ffcd775b12ca6 Mon Sep 17 00:00:00 2001 From: David Miller Date: Tue, 13 May 2008 22:06:59 -0700 Subject: sparc64: add ftrace support. Signed-off-by: David S. Miller Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/sparc64/Kconfig | 1 + arch/sparc64/Kconfig.debug | 2 +- arch/sparc64/kernel/Makefile | 1 + arch/sparc64/kernel/ftrace.c | 99 ++++++++++++++++++++++++++++++++++++++++++++ arch/sparc64/lib/mcount.S | 58 ++++++++++++++++++++++++-- 5 files changed, 156 insertions(+), 5 deletions(-) create mode 100644 arch/sparc64/kernel/ftrace.c diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index eb36f3b746b8..a480df6e6012 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -11,6 +11,7 @@ config SPARC config SPARC64 bool default y + select HAVE_FTRACE select HAVE_IDE select HAVE_LMB select HAVE_ARCH_KGDB diff --git a/arch/sparc64/Kconfig.debug b/arch/sparc64/Kconfig.debug index 6a4d28a4076d..d6d32d178fc8 100644 --- a/arch/sparc64/Kconfig.debug +++ b/arch/sparc64/Kconfig.debug @@ -33,7 +33,7 @@ config DEBUG_PAGEALLOC config MCOUNT bool - depends on STACK_DEBUG + depends on STACK_DEBUG || FTRACE default y config FRAME_POINTER diff --git a/arch/sparc64/kernel/Makefile b/arch/sparc64/kernel/Makefile index ec4f5ebb1ca6..418b5782096e 100644 --- a/arch/sparc64/kernel/Makefile +++ b/arch/sparc64/kernel/Makefile @@ -14,6 +14,7 @@ obj-y := process.o setup.o cpu.o idprom.o \ power.o sbus.o sparc64_ksyms.o chmc.o \ visemul.o prom.o of_device.o hvapi.o sstate.o mdesc.o +obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_PCI) += ebus.o pci_common.o \ pci_psycho.o pci_sabre.o pci_schizo.o \ diff --git a/arch/sparc64/kernel/ftrace.c b/arch/sparc64/kernel/ftrace.c new file mode 100644 index 000000000000..f449e6df6c4a --- /dev/null +++ b/arch/sparc64/kernel/ftrace.c @@ -0,0 +1,99 @@ +#include +#include +#include +#include +#include +#include + +static const u32 ftrace_nop = 0x01000000; + +notrace int ftrace_ip_converted(unsigned long ip) +{ + u32 insn = *(u32 *) ip; + + return (insn == ftrace_nop); +} + +notrace unsigned char *ftrace_nop_replace(void) +{ + return (char *)&ftrace_nop; +} + +notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) +{ + static u32 call; + s32 off; + + off = ((s32)addr - (s32)ip); + call = 0x40000000 | ((u32)off >> 2); + + return (unsigned char *) &call; +} + +notrace int +ftrace_modify_code(unsigned long ip, unsigned char *old_code, + unsigned char *new_code) +{ + u32 old = *(u32 *)old_code; + u32 new = *(u32 *)new_code; + u32 replaced; + int faulted; + + __asm__ __volatile__( + "1: cas [%[ip]], %[old], %[new]\n" + " flush %[ip]\n" + " mov 0, %[faulted]\n" + "2:\n" + " .section .fixup,#alloc,#execinstr\n" + " .align 4\n" + "3: sethi %%hi(2b), %[faulted]\n" + " jmpl %[faulted] + %%lo(2b), %%g0\n" + " mov 1, %[faulted]\n" + " .previous\n" + " .section __ex_table,\"a\"\n" + " .align 4\n" + " .word 1b, 3b\n" + " .previous\n" + : "=r" (replaced), [faulted] "=r" (faulted) + : [new] "0" (new), [old] "r" (old), [ip] "r" (ip) + : "memory"); + + if (replaced != old && replaced != new) + faulted = 2; + + return faulted; +} + +notrace int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned long ip = (unsigned long)(&ftrace_call); + unsigned char old[4], *new; + + memcpy(old, &ftrace_call, 4); + new = ftrace_call_replace(ip, (unsigned long)func); + return ftrace_modify_code(ip, old, new); +} + +notrace int ftrace_mcount_set(unsigned long *data) +{ + unsigned long ip = (long)(&mcount_call); + unsigned long *addr = data; + unsigned char old[4], *new; + + /* + * Replace the mcount stub with a pointer to the + * ip recorder function. + */ + memcpy(old, &mcount_call, 4); + new = ftrace_call_replace(ip, *addr); + *addr = ftrace_modify_code(ip, old, new); + + return 0; +} + + +int __init ftrace_dyn_arch_init(void *data) +{ + ftrace_mcount_set(data); + return 0; +} diff --git a/arch/sparc64/lib/mcount.S b/arch/sparc64/lib/mcount.S index 9e4534b485c7..7735a7a60533 100644 --- a/arch/sparc64/lib/mcount.S +++ b/arch/sparc64/lib/mcount.S @@ -28,10 +28,13 @@ ovstack: .skip OVSTACKSIZE #endif .text - .align 32 - .globl mcount, _mcount -mcount: + .align 32 + .globl _mcount + .type _mcount,#function + .globl mcount + .type mcount,#function _mcount: +mcount: #ifdef CONFIG_STACK_DEBUG /* * Check whether %sp is dangerously low. @@ -55,6 +58,53 @@ _mcount: or %g3, %lo(panicstring), %o0 call prom_halt nop +1: +#endif +#ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE + mov %o7, %o0 + .globl mcount_call +mcount_call: + call ftrace_stub + mov %o0, %o7 +#else + sethi %hi(ftrace_trace_function), %g1 + sethi %hi(ftrace_stub), %g2 + ldx [%g1 + %lo(ftrace_trace_function)], %g1 + or %g2, %lo(ftrace_stub), %g2 + cmp %g1, %g2 + be,pn %icc, 1f + mov %i7, %o1 + jmpl %g1, %g0 + mov %o7, %o0 + /* not reached */ +1: #endif -1: retl +#endif + retl nop + .size _mcount,.-_mcount + .size mcount,.-mcount + +#ifdef CONFIG_FTRACE + .globl ftrace_stub + .type ftrace_stub,#function +ftrace_stub: + retl + nop + .size ftrace_stub,.-ftrace_stub +#ifdef CONFIG_DYNAMIC_FTRACE + .globl ftrace_caller + .type ftrace_caller,#function +ftrace_caller: + mov %i7, %o1 + mov %o7, %o0 + .globl ftrace_call +ftrace_call: + call ftrace_stub + mov %o0, %o7 + retl + nop + .size ftrace_caller,.-ftrace_caller +#endif +#endif -- cgit v1.2.3 From 37135677e653537ffc6e7def679443272a1c03c3 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 14 May 2008 08:10:31 +0200 Subject: ftrace: fix mcount export bug David S. Miller noticed the following bug: the -pg instrumentation function callback is named differently on each platform. On x86 it is mcount, on sparc it is _mcount. So the export does not make sense in kernel/trace/ftrace.c - move it to x86. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i386_ksyms_32.c | 9 ++++++++- arch/x86/kernel/x8664_ksyms_64.c | 11 +++++++++-- kernel/trace/ftrace.c | 3 --- 3 files changed, 17 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c index deb43785e923..29999dbb754c 100644 --- a/arch/x86/kernel/i386_ksyms_32.c +++ b/arch/x86/kernel/i386_ksyms_32.c @@ -1,7 +1,14 @@ +#include #include + #include -#include #include +#include + +#ifdef CONFIG_FTRACE +/* mcount is defined in assembly */ +EXPORT_SYMBOL(mcount); +#endif /* Networking helper routines. */ EXPORT_SYMBOL(csum_partial_copy_generic); diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c index f6c05d0410fb..122885bc5f3b 100644 --- a/arch/x86/kernel/x8664_ksyms_64.c +++ b/arch/x86/kernel/x8664_ksyms_64.c @@ -1,15 +1,22 @@ /* Exports for assembly files. All C exports should go in the respective C files. */ +#include #include -#include #include +#include + #include -#include #include +#include #include +#ifdef CONFIG_FTRACE +/* mcount is defined in assembly */ +EXPORT_SYMBOL(mcount); +#endif + EXPORT_SYMBOL(kernel_thread); EXPORT_SYMBOL(__get_user_1); diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 07b2a14943f8..a3e47f43f8a0 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -50,9 +50,6 @@ static struct ftrace_ops ftrace_list_end __read_mostly = static struct ftrace_ops *ftrace_list __read_mostly = &ftrace_list_end; ftrace_func_t ftrace_trace_function __read_mostly = ftrace_stub; -/* mcount is defined per arch in assembly */ -EXPORT_SYMBOL(mcount); - void ftrace_list_func(unsigned long ip, unsigned long parent_ip) { struct ftrace_ops *op = ftrace_list; -- cgit v1.2.3 From 2d8b820b2e81954754277723379ae9ed5de316fa Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 23 Feb 2008 16:55:50 +0100 Subject: ftrace: cleanups factor out code and clean it up. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/ftrace.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index a3e47f43f8a0..89bd9a6f52ec 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -18,13 +18,13 @@ #include #include #include -#include #include -#include +#include #include +#include #include -#include #include +#include #include #include "trace.h" -- cgit v1.2.3 From d49dbf33f0bf8748ee3662b973eb57e60525d622 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 16 May 2008 10:41:53 +0200 Subject: ftrace: fix include file dependency Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 017ab44d572a..911d5d80b49f 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -4,6 +4,7 @@ #ifdef CONFIG_FTRACE #include +#include extern int ftrace_enabled; extern int -- cgit v1.2.3 From 489f139614596cbc956a06f5e4bb41288e276fe3 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 25 Feb 2008 13:38:05 +0100 Subject: ftrace: fix build bug Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 911d5d80b49f..922e23d0196f 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -106,16 +106,16 @@ static inline void tracer_disable(void) #endif #ifdef CONFIG_IRQSOFF_TRACER - extern void notrace time_hardirqs_on(unsigned long a0, unsigned long a1); - extern void notrace time_hardirqs_off(unsigned long a0, unsigned long a1); + extern void time_hardirqs_on(unsigned long a0, unsigned long a1); + extern void time_hardirqs_off(unsigned long a0, unsigned long a1); #else # define time_hardirqs_on(a0, a1) do { } while (0) # define time_hardirqs_off(a0, a1) do { } while (0) #endif #ifdef CONFIG_PREEMPT_TRACER - extern void notrace trace_preempt_on(unsigned long a0, unsigned long a1); - extern void notrace trace_preempt_off(unsigned long a0, unsigned long a1); + extern void trace_preempt_on(unsigned long a0, unsigned long a1); + extern void trace_preempt_off(unsigned long a0, unsigned long a1); #else # define trace_preempt_on(a0, a1) do { } while (0) # define trace_preempt_off(a0, a1) do { } while (0) -- cgit v1.2.3 From e0eca07badc023a675a61906020b397da20f07c3 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 14 May 2008 23:49:43 -0400 Subject: ftrace, POWERPC: add irqs_disabled_flags to ppc PPC doesn't have the irqs_disabled_flags needed by ftrace. This patch adds it. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-powerpc/hw_irq.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h index ad8c9f7fd0e3..f75a5fc64d2e 100644 --- a/include/asm-powerpc/hw_irq.h +++ b/include/asm-powerpc/hw_irq.h @@ -59,6 +59,11 @@ extern void iseries_handle_interrupts(void); get_paca()->hard_enabled = 0; \ } while(0) +static inline int irqs_disabled_flags(unsigned long flags) +{ + return flags == 0; +} + #else #if defined(CONFIG_BOOKE) @@ -113,6 +118,11 @@ static inline void local_irq_save_ptr(unsigned long *flags) #define hard_irq_enable() local_irq_enable() #define hard_irq_disable() local_irq_disable() +static inline int irqs_disabled_flags(unsigned long flags) +{ + return (flags & MSR_EE) == 0; +} + #endif /* CONFIG_PPC64 */ /* -- cgit v1.2.3 From 4e491d14f2506b218d678935c25a7027b79178b1 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 14 May 2008 23:49:44 -0400 Subject: ftrace: support for PowerPC This patch adds full support for ftrace for PowerPC (both 64 and 32 bit). This includes dynamic tracing and function filtering. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/powerpc/Kconfig | 3 +- arch/powerpc/kernel/Makefile | 14 +++ arch/powerpc/kernel/entry_32.S | 130 ++++++++++++++++++++++++ arch/powerpc/kernel/entry_64.S | 62 ++++++++++++ arch/powerpc/kernel/ftrace.c | 165 +++++++++++++++++++++++++++++++ arch/powerpc/kernel/io.c | 3 +- arch/powerpc/kernel/irq.c | 6 +- arch/powerpc/kernel/setup_32.c | 11 ++- arch/powerpc/kernel/setup_64.c | 5 + arch/powerpc/platforms/powermac/Makefile | 5 + kernel/trace/trace_selftest.c | 11 ++- 11 files changed, 405 insertions(+), 10 deletions(-) create mode 100644 arch/powerpc/kernel/ftrace.c diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 3934e2659407..62d034adbd43 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -105,11 +105,12 @@ config ARCH_NO_VIRT_TO_BUS config PPC bool default y + select HAVE_FTRACE select HAVE_IDE - select HAVE_OPROFILE select HAVE_KPROBES select HAVE_KRETPROBES select HAVE_LMB + select HAVE_OPROFILE config EARLY_PRINTK bool diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 2346d271fbfd..f3f5e2641432 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,6 +12,18 @@ CFLAGS_prom_init.o += -fPIC CFLAGS_btext.o += -fPIC endif +ifdef CONFIG_FTRACE +# Do not trace early boot code +CFLAGS_REMOVE_cputable.o = -pg +CFLAGS_REMOVE_prom_init.o = -pg + +ifdef CONFIG_DYNAMIC_FTRACE +# dynamic ftrace setup. +CFLAGS_REMOVE_ftrace.o = -pg +endif + +endif + obj-y := cputable.o ptrace.o syscalls.o \ irq.o align.o signal_32.o pmc.o vdso.o \ init_task.o process.o systbl.o idle.o \ @@ -78,6 +90,8 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \ obj-$(CONFIG_AUDIT) += audit.o obj64-$(CONFIG_AUDIT) += compat_audit.o +obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o + obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o ifneq ($(CONFIG_PPC_INDIRECT_IO),y) diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 0c8614d9875c..0e6221889ca9 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -1035,3 +1035,133 @@ machine_check_in_rtas: /* XXX load up BATs and panic */ #endif /* CONFIG_PPC_RTAS */ + +#ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE +_GLOBAL(mcount) +_GLOBAL(_mcount) + stwu r1,-48(r1) + stw r3, 12(r1) + stw r4, 16(r1) + stw r5, 20(r1) + stw r6, 24(r1) + mflr r3 + stw r7, 28(r1) + mfcr r5 + stw r8, 32(r1) + stw r9, 36(r1) + stw r10,40(r1) + stw r3, 44(r1) + stw r5, 8(r1) + .globl mcount_call +mcount_call: + bl ftrace_stub + nop + lwz r6, 8(r1) + lwz r0, 44(r1) + lwz r3, 12(r1) + mtctr r0 + lwz r4, 16(r1) + mtcr r6 + lwz r5, 20(r1) + lwz r6, 24(r1) + lwz r0, 52(r1) + lwz r7, 28(r1) + lwz r8, 32(r1) + mtlr r0 + lwz r9, 36(r1) + lwz r10,40(r1) + addi r1, r1, 48 + bctr + +_GLOBAL(ftrace_caller) + /* Based off of objdump optput from glibc */ + stwu r1,-48(r1) + stw r3, 12(r1) + stw r4, 16(r1) + stw r5, 20(r1) + stw r6, 24(r1) + mflr r3 + lwz r4, 52(r1) + mfcr r5 + stw r7, 28(r1) + stw r8, 32(r1) + stw r9, 36(r1) + stw r10,40(r1) + stw r3, 44(r1) + stw r5, 8(r1) +.globl ftrace_call +ftrace_call: + bl ftrace_stub + nop + lwz r6, 8(r1) + lwz r0, 44(r1) + lwz r3, 12(r1) + mtctr r0 + lwz r4, 16(r1) + mtcr r6 + lwz r5, 20(r1) + lwz r6, 24(r1) + lwz r0, 52(r1) + lwz r7, 28(r1) + lwz r8, 32(r1) + mtlr r0 + lwz r9, 36(r1) + lwz r10,40(r1) + addi r1, r1, 48 + bctr +#else +_GLOBAL(mcount) +_GLOBAL(_mcount) + stwu r1,-48(r1) + stw r3, 12(r1) + stw r4, 16(r1) + stw r5, 20(r1) + stw r6, 24(r1) + mflr r3 + lwz r4, 52(r1) + mfcr r5 + stw r7, 28(r1) + stw r8, 32(r1) + stw r9, 36(r1) + stw r10,40(r1) + stw r3, 44(r1) + stw r5, 8(r1) + + LOAD_REG_ADDR(r5, ftrace_trace_function) +#if 0 + mtctr r3 + mr r1, r5 + bctrl +#endif + lwz r5,0(r5) +#if 1 + mtctr r5 + bctrl +#else + bl ftrace_stub +#endif + nop + + lwz r6, 8(r1) + lwz r0, 44(r1) + lwz r3, 12(r1) + mtctr r0 + lwz r4, 16(r1) + mtcr r6 + lwz r5, 20(r1) + lwz r6, 24(r1) + lwz r0, 52(r1) + lwz r7, 28(r1) + lwz r8, 32(r1) + mtlr r0 + lwz r9, 36(r1) + lwz r10,40(r1) + addi r1, r1, 48 + bctr +#endif + +_GLOBAL(ftrace_stub) + blr + +#endif /* CONFIG_MCOUNT */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index c0db5b769e55..2c4d9e056ead 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -870,3 +870,65 @@ _GLOBAL(enter_prom) ld r0,16(r1) mtlr r0 blr + +#ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE +_GLOBAL(mcount) +_GLOBAL(_mcount) + /* Taken from output of objdump from lib64/glibc */ + mflr r3 + stdu r1, -112(r1) + std r3, 128(r1) + .globl mcount_call +mcount_call: + bl ftrace_stub + nop + ld r0, 128(r1) + mtlr r0 + addi r1, r1, 112 + blr + +_GLOBAL(ftrace_caller) + /* Taken from output of objdump from lib64/glibc */ + mflr r3 + ld r11, 0(r1) + stdu r1, -112(r1) + std r3, 128(r1) + ld r4, 16(r11) +.globl ftrace_call +ftrace_call: + bl ftrace_stub + nop + ld r0, 128(r1) + mtlr r0 + addi r1, r1, 112 +_GLOBAL(ftrace_stub) + blr +#else +_GLOBAL(mcount) + blr + +_GLOBAL(_mcount) + /* Taken from output of objdump from lib64/glibc */ + mflr r3 + ld r11, 0(r1) + stdu r1, -112(r1) + std r3, 128(r1) + ld r4, 16(r11) + + + LOAD_REG_ADDR(r5,ftrace_trace_function) + ld r5,0(r5) + ld r5,0(r5) + mtctr r5 + bctrl + + nop + ld r0, 128(r1) + mtlr r0 + addi r1, r1, 112 +_GLOBAL(ftrace_stub) + blr + +#endif +#endif diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c new file mode 100644 index 000000000000..5a4993fefa45 --- /dev/null +++ b/arch/powerpc/kernel/ftrace.c @@ -0,0 +1,165 @@ +/* + * Code for replacing ftrace calls with jumps. + * + * Copyright (C) 2007-2008 Steven Rostedt + * + * Thanks goes out to P.A. Semi, Inc for supplying me with a PPC64 box. + * + */ + +#include +#include +#include +#include +#include +#include + +#include + +#define CALL_BACK 4 + +static unsigned int ftrace_nop = 0x60000000; + +#ifdef CONFIG_PPC32 +# define GET_ADDR(addr) addr +#else +/* PowerPC64's functions are data that points to the functions */ +# define GET_ADDR(addr) *(unsigned long *)addr +#endif + +notrace int ftrace_ip_converted(unsigned long ip) +{ + unsigned int save; + + ip -= CALL_BACK; + save = *(unsigned int *)ip; + + return save == ftrace_nop; +} + +static unsigned int notrace ftrace_calc_offset(long ip, long addr) +{ + return (int)((addr + CALL_BACK) - ip); +} + +notrace unsigned char *ftrace_nop_replace(void) +{ + return (char *)&ftrace_nop; +} + +notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) +{ + static unsigned int op; + + addr = GET_ADDR(addr); + + /* Set to "bl addr" */ + op = 0x48000001 | (ftrace_calc_offset(ip, addr) & 0x03fffffe); + + /* + * No locking needed, this must be called via kstop_machine + * which in essence is like running on a uniprocessor machine. + */ + return (unsigned char *)&op; +} + +#ifdef CONFIG_PPC64 +# define _ASM_ALIGN " .align 3 " +# define _ASM_PTR " .llong " +#else +# define _ASM_ALIGN " .align 2 " +# define _ASM_PTR " .long " +#endif + +notrace int +ftrace_modify_code(unsigned long ip, unsigned char *old_code, + unsigned char *new_code) +{ + unsigned replaced; + unsigned old = *(unsigned *)old_code; + unsigned new = *(unsigned *)new_code; + int faulted = 0; + + /* move the IP back to the start of the call */ + ip -= CALL_BACK; + + /* + * Note: Due to modules and __init, code can + * disappear and change, we need to protect against faulting + * as well as code changing. + * + * No real locking needed, this code is run through + * kstop_machine. + */ + asm volatile ( + "1: lwz %1, 0(%2)\n" + " cmpw %1, %5\n" + " bne 2f\n" + " stwu %3, 0(%2)\n" + "2:\n" + ".section .fixup, \"ax\"\n" + "3: li %0, 1\n" + " b 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + _ASM_ALIGN "\n" + _ASM_PTR "1b, 3b\n" + ".previous" + : "=r"(faulted), "=r"(replaced) + : "r"(ip), "r"(new), + "0"(faulted), "r"(old) + : "memory"); + + if (replaced != old && replaced != new) + faulted = 2; + + if (!faulted) + flush_icache_range(ip, ip + 8); + + return faulted; +} + +notrace int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned long ip = (unsigned long)(&ftrace_call); + unsigned char old[4], *new; + int ret; + + ip += CALL_BACK; + + memcpy(old, &ftrace_call, 4); + new = ftrace_call_replace(ip, (unsigned long)func); + ret = ftrace_modify_code(ip, old, new); + + return ret; +} + +notrace int ftrace_mcount_set(unsigned long *data) +{ + unsigned long ip = (long)(&mcount_call); + unsigned long *addr = data; + unsigned char old[4], *new; + + /* ip is at the location, but modify code will subtact this */ + ip += CALL_BACK; + + /* + * Replace the mcount stub with a pointer to the + * ip recorder function. + */ + memcpy(old, &mcount_call, 4); + new = ftrace_call_replace(ip, *addr); + *addr = ftrace_modify_code(ip, old, new); + + return 0; +} + +int __init ftrace_dyn_arch_init(void *data) +{ + /* This is running in kstop_machine */ + + ftrace_mcount_set(data); + + return 0; +} + diff --git a/arch/powerpc/kernel/io.c b/arch/powerpc/kernel/io.c index e31aca9208eb..1882bf419fa6 100644 --- a/arch/powerpc/kernel/io.c +++ b/arch/powerpc/kernel/io.c @@ -120,7 +120,8 @@ EXPORT_SYMBOL(_outsl_ns); #define IO_CHECK_ALIGN(v,a) ((((unsigned long)(v)) & ((a) - 1)) == 0) -void _memset_io(volatile void __iomem *addr, int c, unsigned long n) +notrace void +_memset_io(volatile void __iomem *addr, int c, unsigned long n) { void *p = (void __force *)addr; u32 lc = c; diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 2f73f705d564..6e01eb0a3315 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -98,7 +98,7 @@ EXPORT_SYMBOL(irq_desc); int distribute_irqs = 1; -static inline unsigned long get_hard_enabled(void) +static inline notrace unsigned long get_hard_enabled(void) { unsigned long enabled; @@ -108,13 +108,13 @@ static inline unsigned long get_hard_enabled(void) return enabled; } -static inline void set_soft_enabled(unsigned long enable) +static inline notrace void set_soft_enabled(unsigned long enable) { __asm__ __volatile__("stb %0,%1(13)" : : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled))); } -void raw_local_irq_restore(unsigned long en) +notrace void raw_local_irq_restore(unsigned long en) { /* * get_paca()->soft_enabled = en; diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 5112a4aa801d..22f8e2bacd32 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -47,6 +47,11 @@ #include #endif +#ifdef CONFIG_FTRACE +extern void _mcount(void); +EXPORT_SYMBOL(_mcount); +#endif + extern void bootx_init(unsigned long r4, unsigned long phys); int boot_cpuid; @@ -81,7 +86,7 @@ int ucache_bsize; * from the address that it was linked at, so we must use RELOC/PTRRELOC * to access static data (including strings). -- paulus */ -unsigned long __init early_init(unsigned long dt_ptr) +notrace unsigned long __init early_init(unsigned long dt_ptr) { unsigned long offset = reloc_offset(); struct cpu_spec *spec; @@ -111,7 +116,7 @@ unsigned long __init early_init(unsigned long dt_ptr) * This is called very early on the boot process, after a minimal * MMU environment has been set up but before MMU_init is called. */ -void __init machine_init(unsigned long dt_ptr, unsigned long phys) +notrace void __init machine_init(unsigned long dt_ptr, unsigned long phys) { /* Enable early debugging if any specified (see udbg.h) */ udbg_early_init(); @@ -133,7 +138,7 @@ void __init machine_init(unsigned long dt_ptr, unsigned long phys) #ifdef CONFIG_BOOKE_WDT /* Checks wdt=x and wdt_period=xx command-line option */ -int __init early_parse_wdt(char *p) +notrace int __init early_parse_wdt(char *p) { if (p && strncmp(p, "0", 1) != 0) booke_wdt_enabled = 1; diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 098fd96a394a..277bf18cbbcc 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -85,6 +85,11 @@ struct ppc64_caches ppc64_caches = { }; EXPORT_SYMBOL_GPL(ppc64_caches); +#ifdef CONFIG_FTRACE +extern void _mcount(void); +EXPORT_SYMBOL(_mcount); +#endif + /* * These are used in binfmt_elf.c to put aux entries on the stack * for each elf executable being started. diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index 4d72c8f72159..89774177b209 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -1,5 +1,10 @@ CFLAGS_bootx_init.o += -fPIC +ifdef CONFIG_FTRACE +# Do not trace early boot code +CFLAGS_REMOVE_bootx_init.o = -pg +endif + obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o pfunc_core.o \ pfunc_base.o diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index a5f6001c3332..3877dd9102f1 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -123,6 +123,7 @@ int trace_selftest_startup_dynamic_tracing(struct tracer *trace, int ret; int save_ftrace_enabled = ftrace_enabled; int save_tracer_enabled = tracer_enabled; + char *func_name; /* The ftrace test PASSED */ printk(KERN_CONT "PASSED\n"); @@ -142,9 +143,15 @@ int trace_selftest_startup_dynamic_tracing(struct tracer *trace, return ret; } + /* + * Some archs *cough*PowerPC*cough* add charachters to the + * start of the function names. We simply put a '*' to + * accomodate them. + */ + func_name = "*" STR(DYN_FTRACE_TEST_NAME); + /* filter only on our function */ - ftrace_set_filter(STR(DYN_FTRACE_TEST_NAME), - sizeof(STR(DYN_FTRACE_TEST_NAME)), 1); + ftrace_set_filter(func_name, strlen(func_name), 1); /* enable tracing */ tr->ctrl = 1; -- cgit v1.2.3 From 656ee82cc855027b2e994ad218519b09fa652cc1 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 14 May 2008 21:30:29 -0400 Subject: kbuild: create new CFLAGS_REMOVE_(basename).o option We currently have a way to add special CFLAGS to code, but we do not have a way to remove them if needed. With the case of ftrace, some files should simply not be profiled. Adding the -pg flag to these files is simply a waste, and adding "notrace" to each and every function is ugly. Currently we put in "Makefile turd" [1] to stop the compiler from adding -pg to certain files. This was clumsy and awkward. This patch now adds the revese of CFLAGS_(basename).o with CFLAGS_REMOVE_(basename).o. This allows developers to prevent certain CFLAGS from being used to compile files. For example, we can now do CFLAGS_REMOVE_string.o = -pg to remove the -pg option from the string.o file in the lib directory. Note: a space delimited list of options may be added to the REMOVE macro. [1] - what David Miller called the workaronud to remove -pg Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- scripts/Makefile.lib | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 8e440233c27d..ea48b82a3707 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -96,7 +96,8 @@ basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))" modname_flags = $(if $(filter 1,$(words $(modname))),\ -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") -_c_flags = $(KBUILD_CFLAGS) $(ccflags-y) $(CFLAGS_$(basetarget).o) +orig_c_flags = $(KBUILD_CFLAGS) $(ccflags-y) $(CFLAGS_$(basetarget).o) +_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags)) _a_flags = $(KBUILD_AFLAGS) $(asflags-y) $(AFLAGS_$(basetarget).o) _cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F)) -- cgit v1.2.3 From 6ec562328fda585be2d7f472cfac99d3b44d362a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 14 May 2008 21:30:30 -0400 Subject: ftrace: use the new kbuild CFLAGS_REMOVE for kernel directory This patch removes the Makefile turd and uses the nice CFLAGS_REMOVE macro in the kernel directory. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/Makefile | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/kernel/Makefile b/kernel/Makefile index d2f80ea4cd9a..ca2433e84873 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -11,12 +11,16 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o profile.o \ hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o +CFLAGS_REMOVE_sched.o = -pg -mno-spe + ifdef CONFIG_FTRACE -# Do not profile debug utilities -ORIG_CFLAGS := $(KBUILD_CFLAGS) -KBUILD_CFLAGS = $(if $(filter-out lockdep% %debug,$(basename $(notdir $@))), \ - $(ORIG_CFLAGS), \ - $(subst -pg,,$(ORIG_CFLAGS))) +# Do not trace debug files and internal ftrace files +CFLAGS_REMOVE_lockdep.o = -pg +CFLAGS_REMOVE_lockdep_proc.o = -pg +CFLAGS_REMOVE_mutex-debug.o = -pg +CFLAGS_REMOVE_rtmutex-debug.o = -pg +CFLAGS_REMOVE_cgroup-debug.o = -pg +CFLAGS_REMOVE_sched_clock.o = -pg endif obj-$(CONFIG_SYSCTL_SYSCALL_CHECK) += sysctl_check.o -- cgit v1.2.3 From 654e4787689faffdd2137fe91f59fd3ef3363ad2 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 14 May 2008 21:30:31 -0400 Subject: ftrace: use the new kbuild CFLAGS_REMOVE for lib directory This patch removes the Makefile turd and uses the nice CFLAGS_REMOVE macro in the lib directory. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- lib/Makefile | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/lib/Makefile b/lib/Makefile index d97ad1100b6f..4b836a53c08f 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -10,11 +10,11 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \ ifdef CONFIG_FTRACE # Do not profile string.o, since it may be used in early boot or vdso +CFLAGS_REMOVE_string.o = -pg # Also do not profile any debug utilities -ORIG_CFLAGS := $(KBUILD_CFLAGS) -KBUILD_CFLAGS = $(if $(filter-out %debug debug% string%,$(basename $(notdir $@))), \ - $(ORIG_CFLAGS), \ - $(subst -pg,,$(ORIG_CFLAGS))) +CFLAGS_REMOVE_spinlock_debug.o = -pg +CFLAGS_REMOVE_list_debug.o = -pg +CFLAGS_REMOVE_debugobjects.o = -pg endif lib-$(CONFIG_MMU) += ioremap.o -- cgit v1.2.3 From 7fa09f24b477ad41b821713eba757b3aa7a2864a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 14 May 2008 21:30:32 -0400 Subject: ftrace: use the new kbuild CFLAGS_REMOVE for x86/kernel directory This patch removes the Makefile turd and uses the nice CFLAGS_REMOVE macro in the x86/kernel directory. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index e142091524b0..739d49acd2f1 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -6,6 +6,13 @@ extra-y := head_$(BITS).o head$(BITS).o init_task.o vmlinux.lds CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE) +ifdef CONFIG_FTRACE +# Do not profile debug utilities +CFLAGS_REMOVE_tsc_64.o = -pg +CFLAGS_REMOVE_tsc_32.o = -pg +CFLAGS_REMOVE_rtc.o = -pg +endif + # # vsyscalls (which work on the user stack) should have # no stack-protector checks: -- cgit v1.2.3 From 677aa9f77e8de3791b481a0cec6c8b84d1eec626 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Sat, 17 May 2008 00:01:36 -0400 Subject: ftrace: add have dynamic ftrace config for archs Now that ftrace is being ported to other architectures, it has become apparent that DYNAMIC_FTRACE is dependent on whether or not that architecture implements dynamic ftrace. FTRACE itself may be ported to an architecture without porting dynamic ftrace. This patch adds HAVE_DYNAMIC_FTRACE to allow architectures to port ftrace without having to also port the dynamic aspect as well. Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/powerpc/Kconfig | 1 + arch/sparc64/Kconfig | 1 + arch/x86/Kconfig | 1 + kernel/trace/Kconfig | 4 ++++ 4 files changed, 7 insertions(+) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 62d034adbd43..a5e9912e2d37 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -105,6 +105,7 @@ config ARCH_NO_VIRT_TO_BUS config PPC bool default y + select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE select HAVE_IDE select HAVE_KPROBES diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index a480df6e6012..fca9246470b1 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -11,6 +11,7 @@ config SPARC config SPARC64 bool default y + select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE select HAVE_IDE select HAVE_LMB diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index c742dfeb0dbe..fc86c54e791e 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -23,6 +23,7 @@ config X86 select HAVE_OPROFILE select HAVE_KPROBES select HAVE_KRETPROBES + select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64) select HAVE_ARCH_KGDB if !X86_VOYAGER diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index f3005717bcd0..5c2295b29f2c 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -4,6 +4,9 @@ config HAVE_FTRACE bool +config HAVE_DYNAMIC_FTRACE + bool + config TRACER_MAX_TRACE bool @@ -94,6 +97,7 @@ config CONTEXT_SWITCH_TRACER config DYNAMIC_FTRACE bool "enable/disable ftrace tracepoints dynamically" depends on FTRACE + depends on HAVE_DYNAMIC_FTRACE default y help This option will modify all the calls to ftrace dynamically -- cgit v1.2.3 From f06c38103ea9dbca27c3f4d77f444ddefb5477cd Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:47 +0200 Subject: ftrace: add sysprof plugin very first baby version. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/Kconfig | 8 +++++ kernel/trace/Makefile | 1 + kernel/trace/trace_sysprof.c | 80 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 89 insertions(+) create mode 100644 kernel/trace/trace_sysprof.c diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 5c2295b29f2c..e101c9a85f0f 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -75,6 +75,14 @@ config PREEMPT_TRACER enabled. This option and the irqs-off timing option can be used together or separately.) +config SYSPROF_TRACER + bool "Sysprof Tracer" + depends on DEBUG_KERNEL + select TRACING + help + This tracer provides the trace needed by the 'Sysprof' userspace + tool. + config SCHED_TRACER bool "Scheduling Latency Tracer" depends on HAVE_FTRACE diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index d9efbbfa2bdf..7aec123ec1d8 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_FTRACE) += libftrace.o obj-$(CONFIG_TRACING) += trace.o obj-$(CONFIG_CONTEXT_SWITCH_TRACER) += trace_sched_switch.o +obj-$(CONFIG_SYSPROF_TRACER) += trace_sysprof.o obj-$(CONFIG_FTRACE) += trace_functions.o obj-$(CONFIG_IRQSOFF_TRACER) += trace_irqsoff.o obj-$(CONFIG_PREEMPT_TRACER) += trace_irqsoff.o diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c new file mode 100644 index 000000000000..6c139bc1be7e --- /dev/null +++ b/kernel/trace/trace_sysprof.c @@ -0,0 +1,80 @@ +/* + * trace stack traces + * + * Copyright (C) 2007 Steven Rostedt + * Copyright (C) 2008 Ingo Molnar + * + */ +#include +#include +#include +#include +#include +#include +#include + +#include "trace.h" + +static struct trace_array *ctx_trace; +static int __read_mostly tracer_enabled; + +static notrace void stack_reset(struct trace_array *tr) +{ + int cpu; + + tr->time_start = ftrace_now(tr->cpu); + + for_each_online_cpu(cpu) + tracing_reset(tr->data[cpu]); +} + +static notrace void start_stack_trace(struct trace_array *tr) +{ + stack_reset(tr); + tracer_enabled = 1; +} + +static notrace void stop_stack_trace(struct trace_array *tr) +{ + tracer_enabled = 0; +} + +static notrace void stack_trace_init(struct trace_array *tr) +{ + ctx_trace = tr; + + if (tr->ctrl) + start_stack_trace(tr); +} + +static notrace void stack_trace_reset(struct trace_array *tr) +{ + if (tr->ctrl) + stop_stack_trace(tr); +} + +static void stack_trace_ctrl_update(struct trace_array *tr) +{ + /* When starting a new trace, reset the buffers */ + if (tr->ctrl) + start_stack_trace(tr); + else + stop_stack_trace(tr); +} + +static struct tracer stack_trace __read_mostly = +{ + .name = "sysprof", + .init = stack_trace_init, + .reset = stack_trace_reset, + .ctrl_update = stack_trace_ctrl_update, +#ifdef CONFIG_FTRACE_SELFTEST + .selftest = trace_selftest_startup_stack, +#endif +}; + +__init static int init_stack_trace(void) +{ + return register_tracer(&stack_trace); +} +device_initcall(init_stack_trace); -- cgit v1.2.3 From 0075fa80305f3231a2d5df97b00d7f55a48ea27e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:47 +0200 Subject: ftrace: extend sysprof plugin add per CPU hrtimers. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_sysprof.c | 67 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 63 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index 6c139bc1be7e..ba55b871b3d9 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -5,19 +5,76 @@ * Copyright (C) 2008 Ingo Molnar * */ -#include -#include -#include #include +#include +#include #include -#include #include +#include +#include #include "trace.h" static struct trace_array *ctx_trace; static int __read_mostly tracer_enabled; +static const unsigned long sample_period = 1000000; + +/* + * Per CPU hrtimers that do the profiling: + */ +static DEFINE_PER_CPU(struct hrtimer, stack_trace_hrtimer); + +static enum hrtimer_restart stack_trace_timer_fn(struct hrtimer *hrtimer) +{ + /* trace here */ + panic_timeout++; + + hrtimer_forward_now(hrtimer, ns_to_ktime(sample_period)); + + return HRTIMER_RESTART; +} + +static void start_stack_timer(int cpu) +{ + struct hrtimer *hrtimer = &per_cpu(stack_trace_hrtimer, cpu); + + hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + hrtimer->function = stack_trace_timer_fn; + hrtimer->cb_mode = HRTIMER_CB_IRQSAFE_NO_SOFTIRQ; + + hrtimer_start(hrtimer, ns_to_ktime(sample_period), HRTIMER_MODE_REL); +} + +static void start_stack_timers(void) +{ + cpumask_t saved_mask = current->cpus_allowed; + int cpu; + + for_each_online_cpu(cpu) { + set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); + start_stack_timer(cpu); + printk("started timer on cpu%d\n", cpu); + } + set_cpus_allowed_ptr(current, &saved_mask); +} + +static void stop_stack_timer(int cpu) +{ + struct hrtimer *hrtimer = &per_cpu(stack_trace_hrtimer, cpu); + + hrtimer_cancel(hrtimer); + printk("cancelled timer on cpu%d\n", cpu); +} + +static void stop_stack_timers(void) +{ + int cpu; + + for_each_online_cpu(cpu) + stop_stack_timer(cpu); +} + static notrace void stack_reset(struct trace_array *tr) { int cpu; @@ -31,11 +88,13 @@ static notrace void stack_reset(struct trace_array *tr) static notrace void start_stack_trace(struct trace_array *tr) { stack_reset(tr); + start_stack_timers(); tracer_enabled = 1; } static notrace void stop_stack_trace(struct trace_array *tr) { + stop_stack_timers(); tracer_enabled = 0; } -- cgit v1.2.3 From 56a08bdcff20f0022bd9160c1093e56f763499aa Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:47 +0200 Subject: ftrace: extend sysprof plugin some more Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_sysprof.c | 80 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 76 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index ba55b871b3d9..b1137c11ef8b 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -3,7 +3,7 @@ * * Copyright (C) 2007 Steven Rostedt * Copyright (C) 2008 Ingo Molnar - * + * Copyright (C) 2004, 2005, Soeren Sandmann */ #include #include @@ -11,13 +11,17 @@ #include #include #include +#include #include #include "trace.h" -static struct trace_array *ctx_trace; +static struct trace_array *sysprof_trace; static int __read_mostly tracer_enabled; +/* + * 10 msecs for now: + */ static const unsigned long sample_period = 1000000; /* @@ -25,10 +29,78 @@ static const unsigned long sample_period = 1000000; */ static DEFINE_PER_CPU(struct hrtimer, stack_trace_hrtimer); +struct stack_frame { + const void __user *next_fp; + unsigned long return_address; +}; + +static int copy_stack_frame(const void __user *fp, struct stack_frame *frame) +{ + if (!access_ok(VERIFY_READ, fp, sizeof(*frame))) + return 0; + + if (__copy_from_user_inatomic(frame, frame_pointer, sizeof(*frame))) + return 0; + + return 1; +} + +#define SYSPROF_MAX_ADDRESSES 512 + +static void timer_notify(struct pt_regs *regs, int cpu) +{ + const void __user *frame_pointer; + struct trace_array_cpu *data; + struct stack_frame frame; + struct trace_array *tr; + int is_user; + int i; + + if (!regs) + return; + + tr = sysprof_trace; + data = tr->data[cpu]; + is_user = user_mode(regs); + + if (!current || current->pid == 0) + return; + + if (is_user && current->state != TASK_RUNNING) + return; + + if (!is_user) { + /* kernel */ + ftrace(tr, data, current->pid, 1, 0); + return; + + } + + trace_special(tr, data, 0, current->pid, regs->ip); + + frame_pointer = (void __user *)regs->bp; + + for (i = 0; i < SYSPROF_MAX_ADDRESSES; i++) { + if (!copy_stack_frame(frame_pointer, &frame)) + break; + if ((unsigned long)frame_pointer < regs->sp) + break; + + trace_special(tr, data, 1, frame.return_address, + (unsigned long)frame_pointer); + frame_pointer = frame.next_fp; + } + + trace_special(tr, data, 2, current->pid, i); + + if (i == SYSPROF_MAX_ADDRESSES) + trace_special(tr, data, -1, -1, -1); +} + static enum hrtimer_restart stack_trace_timer_fn(struct hrtimer *hrtimer) { /* trace here */ - panic_timeout++; + timer_notify(get_irq_regs(), smp_processor_id()); hrtimer_forward_now(hrtimer, ns_to_ktime(sample_period)); @@ -100,7 +172,7 @@ static notrace void stop_stack_trace(struct trace_array *tr) static notrace void stack_trace_init(struct trace_array *tr) { - ctx_trace = tr; + sysprof_trace = tr; if (tr->ctrl) start_stack_trace(tr); -- cgit v1.2.3 From a6dd24f8d00cbccb560b19a723e6fb9bdfb20799 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:47 +0200 Subject: ftrace: sysprof-plugin, add self-tests Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.h | 4 ++++ kernel/trace/trace_selftest.c | 28 ++++++++++++++++++++++++++++ kernel/trace/trace_sysprof.c | 6 +++--- 3 files changed, 35 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index c460e85e94ed..b2198bc830ae 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -280,6 +280,10 @@ extern int trace_selftest_startup_wakeup(struct tracer *trace, extern int trace_selftest_startup_sched_switch(struct tracer *trace, struct trace_array *tr); #endif +#ifdef CONFIG_SYSPROF_TRACER +extern int trace_selftest_startup_sysprof(struct tracer *trace, + struct trace_array *tr); +#endif #endif /* CONFIG_FTRACE_STARTUP_TEST */ extern void *head_page(struct trace_array_cpu *data); diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index 3877dd9102f1..033a6fb2e5ff 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -537,3 +537,31 @@ trace_selftest_startup_sched_switch(struct tracer *trace, struct trace_array *tr return ret; } #endif /* CONFIG_CONTEXT_SWITCH_TRACER */ + +#ifdef CONFIG_SYSPROF_TRACER +int +trace_selftest_startup_sysprof(struct tracer *trace, struct trace_array *tr) +{ + unsigned long count; + int ret; + + /* start the tracing */ + tr->ctrl = 1; + trace->init(tr); + /* Sleep for a 1/10 of a second */ + msleep(100); + /* stop the tracing. */ + tr->ctrl = 0; + trace->ctrl_update(tr); + /* check the trace buffer */ + ret = trace_test_buffer(tr, &count); + trace->reset(tr); + + if (!ret && !count) { + printk(KERN_CONT ".. no entries found .."); + ret = -1; + } + + return ret; +} +#endif /* CONFIG_SYSPROF_TRACER */ diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index b1137c11ef8b..b78f12f77fca 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -126,7 +126,7 @@ static void start_stack_timers(void) for_each_online_cpu(cpu) { set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); start_stack_timer(cpu); - printk("started timer on cpu%d\n", cpu); + printk(KERN_INFO "started sysprof timer on cpu%d\n", cpu); } set_cpus_allowed_ptr(current, &saved_mask); } @@ -136,7 +136,7 @@ static void stop_stack_timer(int cpu) struct hrtimer *hrtimer = &per_cpu(stack_trace_hrtimer, cpu); hrtimer_cancel(hrtimer); - printk("cancelled timer on cpu%d\n", cpu); + printk(KERN_INFO "cancelled sysprof timer on cpu%d\n", cpu); } static void stop_stack_timers(void) @@ -200,7 +200,7 @@ static struct tracer stack_trace __read_mostly = .reset = stack_trace_reset, .ctrl_update = stack_trace_ctrl_update, #ifdef CONFIG_FTRACE_SELFTEST - .selftest = trace_selftest_startup_stack, + .selftest = trace_selftest_startup_sysprof, #endif }; -- cgit v1.2.3 From 842af315e8b0adad58fc642eaa5e6f53525e0534 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:47 +0200 Subject: ftrace: sysprof plugin improvement add sample maximum depth. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_sysprof.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index b78f12f77fca..7f6fcccffb88 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -23,6 +23,7 @@ static int __read_mostly tracer_enabled; * 10 msecs for now: */ static const unsigned long sample_period = 1000000; +static const unsigned int sample_max_depth = 512; /* * Per CPU hrtimers that do the profiling: @@ -45,8 +46,6 @@ static int copy_stack_frame(const void __user *fp, struct stack_frame *frame) return 1; } -#define SYSPROF_MAX_ADDRESSES 512 - static void timer_notify(struct pt_regs *regs, int cpu) { const void __user *frame_pointer; @@ -80,7 +79,7 @@ static void timer_notify(struct pt_regs *regs, int cpu) frame_pointer = (void __user *)regs->bp; - for (i = 0; i < SYSPROF_MAX_ADDRESSES; i++) { + for (i = 0; i < sample_max_depth; i++) { if (!copy_stack_frame(frame_pointer, &frame)) break; if ((unsigned long)frame_pointer < regs->sp) @@ -93,7 +92,7 @@ static void timer_notify(struct pt_regs *regs, int cpu) trace_special(tr, data, 2, current->pid, i); - if (i == SYSPROF_MAX_ADDRESSES) + if (i == sample_max_depth) trace_special(tr, data, -1, -1, -1); } @@ -126,7 +125,6 @@ static void start_stack_timers(void) for_each_online_cpu(cpu) { set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)); start_stack_timer(cpu); - printk(KERN_INFO "started sysprof timer on cpu%d\n", cpu); } set_cpus_allowed_ptr(current, &saved_mask); } @@ -136,7 +134,6 @@ static void stop_stack_timer(int cpu) struct hrtimer *hrtimer = &per_cpu(stack_trace_hrtimer, cpu); hrtimer_cancel(hrtimer); - printk(KERN_INFO "cancelled sysprof timer on cpu%d\n", cpu); } static void stop_stack_timers(void) -- cgit v1.2.3 From ef4ab15ff34fd9c65e92bee70f58e7179da881c5 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:48 +0200 Subject: ftrace: make sysprof dependent on x86 for now that's the only tested platform for now. If there's interest we can make it generic easily. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/Kconfig | 2 +- kernel/trace/trace_selftest.c | 5 ----- 2 files changed, 1 insertion(+), 6 deletions(-) diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index e101c9a85f0f..9b49526ac0b5 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -77,7 +77,7 @@ config PREEMPT_TRACER config SYSPROF_TRACER bool "Sysprof Tracer" - depends on DEBUG_KERNEL + depends on DEBUG_KERNEL && X86 select TRACING help This tracer provides the trace needed by the 'Sysprof' userspace diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index 033a6fb2e5ff..5588ecc40985 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -557,11 +557,6 @@ trace_selftest_startup_sysprof(struct tracer *trace, struct trace_array *tr) ret = trace_test_buffer(tr, &count); trace->reset(tr); - if (!ret && !count) { - printk(KERN_CONT ".. no entries found .."); - ret = -1; - } - return ret; } #endif /* CONFIG_SYSPROF_TRACER */ -- cgit v1.2.3 From 9f6b4e3f4a24f2590f1c96f117fc45fbea9b0fa4 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:48 +0200 Subject: ftrace: sysprof fix Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_sysprof.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index 7f6fcccffb88..f9a09fe705b0 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -37,21 +37,26 @@ struct stack_frame { static int copy_stack_frame(const void __user *fp, struct stack_frame *frame) { + int ret; + if (!access_ok(VERIFY_READ, fp, sizeof(*frame))) return 0; - if (__copy_from_user_inatomic(frame, frame_pointer, sizeof(*frame))) - return 0; + ret = 1; + pagefault_disable(); + if (__copy_from_user_inatomic(frame, fp, sizeof(*frame))) + ret = 0; + pagefault_enable(); - return 1; + return ret; } static void timer_notify(struct pt_regs *regs, int cpu) { - const void __user *frame_pointer; struct trace_array_cpu *data; struct stack_frame frame; struct trace_array *tr; + const void __user *fp; int is_user; int i; @@ -77,21 +82,26 @@ static void timer_notify(struct pt_regs *regs, int cpu) trace_special(tr, data, 0, current->pid, regs->ip); - frame_pointer = (void __user *)regs->bp; + fp = (void __user *)regs->bp; for (i = 0; i < sample_max_depth; i++) { - if (!copy_stack_frame(frame_pointer, &frame)) + frame.next_fp = 0; + frame.return_address = 0; + if (!copy_stack_frame(fp, &frame)) break; - if ((unsigned long)frame_pointer < regs->sp) + if ((unsigned long)fp < regs->sp) break; trace_special(tr, data, 1, frame.return_address, - (unsigned long)frame_pointer); - frame_pointer = frame.next_fp; + (unsigned long)fp); + fp = frame.next_fp; } trace_special(tr, data, 2, current->pid, i); + /* + * Special trace entry if we overflow the max depth: + */ if (i == sample_max_depth) trace_special(tr, data, -1, -1, -1); } -- cgit v1.2.3 From d618b3e6e50970a6248ac857653fdd49bcd3c045 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:49 +0200 Subject: ftrace: sysprof updates make the sample period configurable. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 3 ++ kernel/trace/trace.h | 2 ++ kernel/trace/trace_sysprof.c | 70 ++++++++++++++++++++++++++++++++++++++++++-- 3 files changed, 73 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 3271916ff033..95b7c48a9a1d 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2800,6 +2800,9 @@ static __init void tracer_init_debugfs(void) pr_warning("Could not create debugfs " "'dyn_ftrace_total_info' entry\n"); #endif +#ifdef CONFIG_SYSPROF_TRACER + init_tracer_sysprof_debugfs(d_tracer); +#endif } static int trace_alloc_page(void) diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index b2198bc830ae..b7f85d9c80d7 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -188,6 +188,8 @@ struct trace_iterator { void tracing_reset(struct trace_array_cpu *data); int tracing_open_generic(struct inode *inode, struct file *filp); struct dentry *tracing_init_dentry(void); +void init_tracer_sysprof_debugfs(struct dentry *d_tracer); + void ftrace(struct trace_array *tr, struct trace_array_cpu *data, unsigned long ip, diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index f9a09fe705b0..19406236b67b 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -20,11 +20,12 @@ static struct trace_array *sysprof_trace; static int __read_mostly tracer_enabled; /* - * 10 msecs for now: + * 1 msec sample interval by default: */ -static const unsigned long sample_period = 1000000; +static unsigned long sample_period = 1000000; static const unsigned int sample_max_depth = 512; +static DEFINE_MUTEX(sample_timer_lock); /* * Per CPU hrtimers that do the profiling: */ @@ -166,15 +167,19 @@ static notrace void stack_reset(struct trace_array *tr) static notrace void start_stack_trace(struct trace_array *tr) { + mutex_lock(&sample_timer_lock); stack_reset(tr); start_stack_timers(); tracer_enabled = 1; + mutex_unlock(&sample_timer_lock); } static notrace void stop_stack_trace(struct trace_array *tr) { + mutex_lock(&sample_timer_lock); stop_stack_timers(); tracer_enabled = 0; + mutex_unlock(&sample_timer_lock); } static notrace void stack_trace_init(struct trace_array *tr) @@ -216,3 +221,64 @@ __init static int init_stack_trace(void) return register_tracer(&stack_trace); } device_initcall(init_stack_trace); + +#define MAX_LONG_DIGITS 22 + +static ssize_t +sysprof_sample_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char buf[MAX_LONG_DIGITS]; + int r; + + r = sprintf(buf, "%ld\n", nsecs_to_usecs(sample_period)); + + return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); +} + +static ssize_t +sysprof_sample_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char buf[MAX_LONG_DIGITS]; + unsigned long val; + + if (cnt > MAX_LONG_DIGITS-1) + cnt = MAX_LONG_DIGITS-1; + + if (copy_from_user(&buf, ubuf, cnt)) + return -EFAULT; + + buf[cnt] = 0; + + val = simple_strtoul(buf, NULL, 10); + /* + * Enforce a minimum sample period of 100 usecs: + */ + if (val < 100) + val = 100; + + mutex_lock(&sample_timer_lock); + stop_stack_timers(); + sample_period = val * 1000; + start_stack_timers(); + mutex_unlock(&sample_timer_lock); + + return cnt; +} + +static struct file_operations sysprof_sample_fops = { + .read = sysprof_sample_read, + .write = sysprof_sample_write, +}; + +void init_tracer_sysprof_debugfs(struct dentry *d_tracer) +{ + struct dentry *entry; + + entry = debugfs_create_file("sysprof_sample_period", 0644, + d_tracer, NULL, &sysprof_sample_fops); + if (entry) + return; + pr_warning("Could not create debugfs 'dyn_ftrace_total_info' entry\n"); +} -- cgit v1.2.3 From ada6b835067dc022f11cdae1c313a3710d3d977c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 23 May 2008 23:50:41 +0200 Subject: ftrace: remove notrace Remove the notrace annotations. The build logic takes care of that. Signed-off-by: Thomas Gleixner --- kernel/trace/trace_sysprof.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index 19406236b67b..3b1e4ba9180d 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -155,7 +155,7 @@ static void stop_stack_timers(void) stop_stack_timer(cpu); } -static notrace void stack_reset(struct trace_array *tr) +static void stack_reset(struct trace_array *tr) { int cpu; @@ -165,7 +165,7 @@ static notrace void stack_reset(struct trace_array *tr) tracing_reset(tr->data[cpu]); } -static notrace void start_stack_trace(struct trace_array *tr) +static void start_stack_trace(struct trace_array *tr) { mutex_lock(&sample_timer_lock); stack_reset(tr); @@ -174,7 +174,7 @@ static notrace void start_stack_trace(struct trace_array *tr) mutex_unlock(&sample_timer_lock); } -static notrace void stop_stack_trace(struct trace_array *tr) +static void stop_stack_trace(struct trace_array *tr) { mutex_lock(&sample_timer_lock); stop_stack_timers(); @@ -182,7 +182,7 @@ static notrace void stop_stack_trace(struct trace_array *tr) mutex_unlock(&sample_timer_lock); } -static notrace void stack_trace_init(struct trace_array *tr) +static void stack_trace_init(struct trace_array *tr) { sysprof_trace = tr; @@ -190,7 +190,7 @@ static notrace void stack_trace_init(struct trace_array *tr) start_stack_trace(tr); } -static notrace void stack_trace_reset(struct trace_array *tr) +static void stack_trace_reset(struct trace_array *tr) { if (tr->ctrl) stop_stack_trace(tr); -- cgit v1.2.3 From 9caee613d3b860ae81b79370eeae9ac967c07536 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 23 May 2008 23:55:54 +0200 Subject: ftrace: fix __trace_special() Signed-off-by: Thomas Gleixner --- kernel/trace/trace_sysprof.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index 3b1e4ba9180d..76dd953eeccd 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -81,7 +81,7 @@ static void timer_notify(struct pt_regs *regs, int cpu) } - trace_special(tr, data, 0, current->pid, regs->ip); + __trace_special(tr, data, 0, current->pid, regs->ip); fp = (void __user *)regs->bp; @@ -93,18 +93,18 @@ static void timer_notify(struct pt_regs *regs, int cpu) if ((unsigned long)fp < regs->sp) break; - trace_special(tr, data, 1, frame.return_address, + __trace_special(tr, data, 1, frame.return_address, (unsigned long)fp); fp = frame.next_fp; } - trace_special(tr, data, 2, current->pid, i); + __trace_special(tr, data, 2, current->pid, i); /* * Special trace entry if we overflow the max depth: */ if (i == sample_max_depth) - trace_special(tr, data, -1, -1, -1); + __trace_special(tr, data, -1, -1, -1); } static enum hrtimer_restart stack_trace_timer_fn(struct hrtimer *hrtimer) -- cgit v1.2.3 From 5fc4511c756860149b81aead6eca5bdf5c438ea7 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 23 May 2008 23:58:21 +0200 Subject: ftrace: make it more available in the Kconfig Signed-off-by: Thomas Gleixner --- kernel/trace/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index 9b49526ac0b5..e101c9a85f0f 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -77,7 +77,7 @@ config PREEMPT_TRACER config SYSPROF_TRACER bool "Sysprof Tracer" - depends on DEBUG_KERNEL && X86 + depends on DEBUG_KERNEL select TRACING help This tracer provides the trace needed by the 'Sysprof' userspace -- cgit v1.2.3 From cd2134b1dda92fd450e6a1e12b1c7960dd6a2178 Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Pedersen Date: Mon, 12 May 2008 21:20:54 +0200 Subject: sysprof: kernel trace add kernel backtracing to the sysprof tracer. change the format of the data, so that type=0 means beginning of stack trace, 1 means kernel address, 2 means user address, and 3 means end of trace. EIP addresses are no longer distinguished from return addresses, mostly because sysprof userspace doesn't make use of it. It may be worthwhile adding this back in though, just in case it becomes interesting. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_sysprof.c | 89 +++++++++++++++++++++++++++++++++++++++----- 1 file changed, 80 insertions(+), 9 deletions(-) diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index 76dd953eeccd..ebcb66d054cc 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -14,6 +14,8 @@ #include #include +#include + #include "trace.h" static struct trace_array *sysprof_trace; @@ -52,6 +54,77 @@ static int copy_stack_frame(const void __user *fp, struct stack_frame *frame) return ret; } +struct backtrace_info { + struct trace_array_cpu *data; + struct trace_array *tr; + int pos; +}; + +static void +backtrace_warning_symbol(void *data, char *msg, unsigned long symbol) +{ + /* Ignore warnings */ +} + +static void backtrace_warning(void *data, char *msg) +{ + /* Ignore warnings */ +} + +static int backtrace_stack(void *data, char *name) +{ + /* Don't bother with IRQ stacks for now */ + return -1; +} + +static void backtrace_address(void *data, unsigned long addr, int reliable) +{ + struct backtrace_info *info = data; + + if (info->pos < sample_max_depth && reliable) { + __trace_special(info->tr, info->data, 1, addr, 0); + + info->pos++; + } +} + +const static struct stacktrace_ops backtrace_ops = { + .warning = backtrace_warning, + .warning_symbol = backtrace_warning_symbol, + .stack = backtrace_stack, + .address = backtrace_address, +}; + +static struct pt_regs * +trace_kernel(struct pt_regs *regs, struct trace_array *tr, + struct trace_array_cpu *data) +{ + struct backtrace_info info; + unsigned long bp; + char *user_stack; + char *stack; + + info.tr = tr; + info.data = data; + info.pos = 1; + + __trace_special(info.tr, info.data, 1, regs->ip, 0); + + stack = ((char *)regs + sizeof(struct pt_regs)); +#ifdef CONFIG_FRAME_POINTER + bp = regs->bp; +#else + bp = 0; +#endif + + dump_trace(NULL, regs, (void *)stack, bp, &backtrace_ops, &info); + + /* Now trace the user stack */ + user_stack = ((char *)current->thread.sp0 - sizeof(struct pt_regs)); + + return (struct pt_regs *)user_stack; +} + static void timer_notify(struct pt_regs *regs, int cpu) { struct trace_array_cpu *data; @@ -74,17 +147,15 @@ static void timer_notify(struct pt_regs *regs, int cpu) if (is_user && current->state != TASK_RUNNING) return; - if (!is_user) { - /* kernel */ - ftrace(tr, data, current->pid, 1, 0); - return; + __trace_special(tr, data, 0, 0, current->pid); - } - - __trace_special(tr, data, 0, current->pid, regs->ip); + if (!is_user) + regs = trace_kernel(regs, tr, data); fp = (void __user *)regs->bp; + __trace_special(tr, data, 2, regs->ip, 0); + for (i = 0; i < sample_max_depth; i++) { frame.next_fp = 0; frame.return_address = 0; @@ -93,12 +164,12 @@ static void timer_notify(struct pt_regs *regs, int cpu) if ((unsigned long)fp < regs->sp) break; - __trace_special(tr, data, 1, frame.return_address, + __trace_special(tr, data, 2, frame.return_address, (unsigned long)fp); fp = frame.next_fp; } - __trace_special(tr, data, 2, current->pid, i); + __trace_special(tr, data, 3, current->pid, i); /* * Special trace entry if we overflow the max depth: -- cgit v1.2.3 From 8a9e94c1fbfdac45a3b6811b880777c4116aa309 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:54 +0200 Subject: sysprof: update copyrights Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_sysprof.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index ebcb66d054cc..fe23d6dba7f1 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -1,9 +1,9 @@ /* * trace stack traces * + * Copyright (C) 2004-2008, Soeren Sandmann * Copyright (C) 2007 Steven Rostedt * Copyright (C) 2008 Ingo Molnar - * Copyright (C) 2004, 2005, Soeren Sandmann */ #include #include -- cgit v1.2.3 From cf3271a73b612a03da00681ecd9bfefab37c74c9 Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Mon, 12 May 2008 05:28:50 +0200 Subject: ftrace/sysprof: don't trace the user stack if we are a kernel thread. Check that current->mm is non-NULL before attempting to trace the user stack. Also take depth of the kernel stack into account when comparing against sample_max_depth. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_sysprof.c | 50 +++++++++++++++++++++++++------------------- 1 file changed, 29 insertions(+), 21 deletions(-) diff --git a/kernel/trace/trace_sysprof.c b/kernel/trace/trace_sysprof.c index fe23d6dba7f1..2301e1e7c606 100644 --- a/kernel/trace/trace_sysprof.c +++ b/kernel/trace/trace_sysprof.c @@ -95,13 +95,12 @@ const static struct stacktrace_ops backtrace_ops = { .address = backtrace_address, }; -static struct pt_regs * +static int trace_kernel(struct pt_regs *regs, struct trace_array *tr, struct trace_array_cpu *data) { struct backtrace_info info; unsigned long bp; - char *user_stack; char *stack; info.tr = tr; @@ -119,10 +118,7 @@ trace_kernel(struct pt_regs *regs, struct trace_array *tr, dump_trace(NULL, regs, (void *)stack, bp, &backtrace_ops, &info); - /* Now trace the user stack */ - user_stack = ((char *)current->thread.sp0 - sizeof(struct pt_regs)); - - return (struct pt_regs *)user_stack; + return info.pos; } static void timer_notify(struct pt_regs *regs, int cpu) @@ -150,32 +146,44 @@ static void timer_notify(struct pt_regs *regs, int cpu) __trace_special(tr, data, 0, 0, current->pid); if (!is_user) - regs = trace_kernel(regs, tr, data); + i = trace_kernel(regs, tr, data); + else + i = 0; - fp = (void __user *)regs->bp; + /* + * Trace user stack if we are not a kernel thread + */ + if (current->mm && i < sample_max_depth) { + regs = (struct pt_regs *)current->thread.sp0 - 1; - __trace_special(tr, data, 2, regs->ip, 0); + fp = (void __user *)regs->bp; - for (i = 0; i < sample_max_depth; i++) { - frame.next_fp = 0; - frame.return_address = 0; - if (!copy_stack_frame(fp, &frame)) - break; - if ((unsigned long)fp < regs->sp) - break; + __trace_special(tr, data, 2, regs->ip, 0); - __trace_special(tr, data, 2, frame.return_address, - (unsigned long)fp); - fp = frame.next_fp; - } + while (i < sample_max_depth) { + frame.next_fp = 0; + frame.return_address = 0; + if (!copy_stack_frame(fp, &frame)) + break; + if ((unsigned long)fp < regs->sp) + break; - __trace_special(tr, data, 3, current->pid, i); + __trace_special(tr, data, 2, frame.return_address, + (unsigned long)fp); + fp = frame.next_fp; + + i++; + } + + } /* * Special trace entry if we overflow the max depth: */ if (i == sample_max_depth) __trace_special(tr, data, -1, -1, -1); + + __trace_special(tr, data, 3, current->pid, i); } static enum hrtimer_restart stack_trace_timer_fn(struct hrtimer *hrtimer) -- cgit v1.2.3 From bfeeeeb991cf75081e6c2f74d44ae5da05b50a94 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 12 May 2008 21:21:14 +0200 Subject: stacktrace: don't crash on invalid stack trace structs This patch makes the stacktrace printout code \warn when the entries pointer is unset rather than crashing when trying to access it in an attempt to make it a bit more robust. I was saving a stacktrace into an skb and forgot to copy it across skb copies... I have since fixed the code, but it would have been easier had the kernel not crashed in an interrupt. Signed-off-by: Johannes Berg Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/stacktrace.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/stacktrace.c b/kernel/stacktrace.c index b71816e47a30..0914d0cbc83c 100644 --- a/kernel/stacktrace.c +++ b/kernel/stacktrace.c @@ -13,6 +13,9 @@ void print_stack_trace(struct stack_trace *trace, int spaces) { int i, j; + if (WARN_ON(!trace->entries)) + return; + for (i = 0; i < trace->nr_entries; i++) { unsigned long ip = trace->entries[i]; -- cgit v1.2.3 From 8b7d89d02ef3c6a7c73d6596f28cea7632850af4 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:56 +0200 Subject: x86: mmiotrace - trace memory mapped IO Mmiotrace is a tool for trapping memory mapped IO (MMIO) accesses within the kernel. It is used for debugging and especially for reverse engineering evil binary drivers. Mmiotrace works by wrapping the ioremap family of kernel functions and marking the returned pages as not present. Access to the IO memory triggers a page fault, which will be handled by mmiotrace's custom page fault handler. This will single-step the faulted instruction with the MMIO page marked as present. Access logs are directed to user space via relay and debug_fs. This page fault approach is necessary, because binary drivers have readl/writel etc. calls inlined and therefore extremely difficult to trap with with e.g. kprobes. This patch depends on the custom page fault handlers patch. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 27 ++ arch/x86/kernel/Makefile | 2 + arch/x86/kernel/init_task.c | 1 + arch/x86/kernel/mmiotrace/Makefile | 4 + arch/x86/kernel/mmiotrace/kmmio.c | 391 ++++++++++++++++++++++ arch/x86/kernel/mmiotrace/kmmio.h | 58 ++++ arch/x86/kernel/mmiotrace/mmio-mod.c | 527 ++++++++++++++++++++++++++++++ arch/x86/kernel/mmiotrace/pf_in.c | 489 +++++++++++++++++++++++++++ arch/x86/kernel/mmiotrace/pf_in.h | 39 +++ arch/x86/kernel/mmiotrace/testmmiotrace.c | 77 +++++ include/linux/mmiotrace.h | 62 ++++ 11 files changed, 1677 insertions(+) create mode 100644 arch/x86/kernel/mmiotrace/Makefile create mode 100644 arch/x86/kernel/mmiotrace/kmmio.c create mode 100644 arch/x86/kernel/mmiotrace/kmmio.h create mode 100644 arch/x86/kernel/mmiotrace/mmio-mod.c create mode 100644 arch/x86/kernel/mmiotrace/pf_in.c create mode 100644 arch/x86/kernel/mmiotrace/pf_in.h create mode 100644 arch/x86/kernel/mmiotrace/testmmiotrace.c create mode 100644 include/linux/mmiotrace.h diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 9431a8399844..7c6496e2225e 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -176,6 +176,33 @@ config PAGE_FAULT_HANDLERS register a function that is called on every page fault. Custom handlers are used by some debugging and reverse engineering tools. +config MMIOTRACE + tristate "Memory mapped IO tracing" + depends on DEBUG_KERNEL && PAGE_FAULT_HANDLERS && RELAY && DEBUG_FS + default n + help + This will build a kernel module called mmiotrace. + + Mmiotrace traces Memory Mapped I/O access and is meant for debugging + and reverse engineering. The kernel module offers wrapped + versions of the ioremap family of functions. The driver to be traced + must be modified to call these wrappers. A user space program is + required to collect the MMIO data. + + See http://nouveau.freedesktop.org/wiki/MmioTrace + If you are not helping to develop drivers, say N. + +config MMIOTRACE_TEST + tristate "Test module for mmiotrace" + depends on MMIOTRACE && m + default n + help + This is a dumb module for testing mmiotrace. It is very dangerous + as it will write garbage to IO memory starting at a given address. + However, it should be safe to use on e.g. unused portion of VRAM. + + Say N, unless you absolutely know what you are doing. + # # IO delay types: # diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 739d49acd2f1..a51ac153685e 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -79,6 +79,8 @@ obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_MMIOTRACE) += mmiotrace/ + obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_K8_NB) += k8.o diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c index a4f93b4120c1..027a5b6a12b2 100644 --- a/arch/x86/kernel/init_task.c +++ b/arch/x86/kernel/init_task.c @@ -15,6 +15,7 @@ static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); struct mm_struct init_mm = INIT_MM(init_mm); EXPORT_UNUSED_SYMBOL(init_mm); /* will be removed in 2.6.26 */ +EXPORT_SYMBOL_GPL(init_mm); /* * Initial thread structure. diff --git a/arch/x86/kernel/mmiotrace/Makefile b/arch/x86/kernel/mmiotrace/Makefile new file mode 100644 index 000000000000..d6905f7f981b --- /dev/null +++ b/arch/x86/kernel/mmiotrace/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_MMIOTRACE) += mmiotrace.o +mmiotrace-objs := pf_in.o kmmio.o mmio-mod.o + +obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c new file mode 100644 index 000000000000..8ba48f9c91b4 --- /dev/null +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -0,0 +1,391 @@ +/* Support for MMIO probes. + * Benfit many code from kprobes + * (C) 2002 Louis Zhuang . + * 2007 Alexander Eichner + * 2008 Pekka Paalanen + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "kmmio.h" + +#define KMMIO_HASH_BITS 6 +#define KMMIO_TABLE_SIZE (1 << KMMIO_HASH_BITS) +#define KMMIO_PAGE_HASH_BITS 4 +#define KMMIO_PAGE_TABLE_SIZE (1 << KMMIO_PAGE_HASH_BITS) + +struct kmmio_context { + struct kmmio_fault_page *fpage; + struct kmmio_probe *probe; + unsigned long saved_flags; + int active; +}; + +static int kmmio_page_fault(struct pt_regs *regs, unsigned long error_code, + unsigned long address); +static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, + void *args); + +static DEFINE_SPINLOCK(kmmio_lock); + +/* These are protected by kmmio_lock */ +unsigned int kmmio_count; +static unsigned int handler_registered; +static struct list_head kmmio_page_table[KMMIO_PAGE_TABLE_SIZE]; +static LIST_HEAD(kmmio_probes); + +static struct kmmio_context kmmio_ctx[NR_CPUS]; + +static struct pf_handler kmmio_pf_hook = { + .handler = kmmio_page_fault +}; + +static struct notifier_block nb_die = { + .notifier_call = kmmio_die_notifier +}; + +int init_kmmio(void) +{ + int i; + for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) + INIT_LIST_HEAD(&kmmio_page_table[i]); + + register_die_notifier(&nb_die); + return 0; +} + +void cleanup_kmmio(void) +{ + /* + * Assume the following have been already cleaned by calling + * unregister_kmmio_probe() appropriately: + * kmmio_page_table, kmmio_probes + */ + if (handler_registered) { + unregister_page_fault_handler(&kmmio_pf_hook); + synchronize_rcu(); + } + unregister_die_notifier(&nb_die); +} + +/* + * this is basically a dynamic stabbing problem: + * Could use the existing prio tree code or + * Possible better implementations: + * The Interval Skip List: A Data Structure for Finding All Intervals That + * Overlap a Point (might be simple) + * Space Efficient Dynamic Stabbing with Fast Queries - Mikkel Thorup + */ +/* Get the kmmio at this addr (if any). You must be holding kmmio_lock. */ +static struct kmmio_probe *get_kmmio_probe(unsigned long addr) +{ + struct kmmio_probe *p; + list_for_each_entry(p, &kmmio_probes, list) { + if (addr >= p->addr && addr <= (p->addr + p->len)) + return p; + } + return NULL; +} + +static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) +{ + struct list_head *head, *tmp; + + page &= PAGE_MASK; + head = &kmmio_page_table[hash_long(page, KMMIO_PAGE_HASH_BITS)]; + list_for_each(tmp, head) { + struct kmmio_fault_page *p + = list_entry(tmp, struct kmmio_fault_page, list); + if (p->page == page) + return p; + } + + return NULL; +} + +static void arm_kmmio_fault_page(unsigned long page, int *large) +{ + unsigned long address = page & PAGE_MASK; + pgd_t *pgd = pgd_offset_k(address); + pud_t *pud = pud_offset(pgd, address); + pmd_t *pmd = pmd_offset(pud, address); + pte_t *pte = pte_offset_kernel(pmd, address); + + if (pmd_large(*pmd)) { + set_pmd(pmd, __pmd(pmd_val(*pmd) & ~_PAGE_PRESENT)); + if (large) + *large = 1; + } else { + set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT)); + } + + __flush_tlb_one(page); +} + +static void disarm_kmmio_fault_page(unsigned long page, int *large) +{ + unsigned long address = page & PAGE_MASK; + pgd_t *pgd = pgd_offset_k(address); + pud_t *pud = pud_offset(pgd, address); + pmd_t *pmd = pmd_offset(pud, address); + pte_t *pte = pte_offset_kernel(pmd, address); + + if (large && *large) { + set_pmd(pmd, __pmd(pmd_val(*pmd) | _PAGE_PRESENT)); + *large = 0; + } else { + set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT)); + } + + __flush_tlb_one(page); +} + +/* + * Interrupts are disabled on entry as trap3 is an interrupt gate + * and they remain disabled thorough out this function. + */ +static int kmmio_handler(struct pt_regs *regs, unsigned long addr) +{ + struct kmmio_context *ctx; + int cpu; + + /* + * Preemption is now disabled to prevent process switch during + * single stepping. We can only handle one active kmmio trace + * per cpu, so ensure that we finish it before something else + * gets to run. + * + * XXX what if an interrupt occurs between returning from + * do_page_fault() and entering the single-step exception handler? + * And that interrupt triggers a kmmio trap? + */ + preempt_disable(); + cpu = smp_processor_id(); + ctx = &kmmio_ctx[cpu]; + + /* interrupts disabled and CPU-local data => atomicity guaranteed. */ + if (ctx->active) { + /* + * This avoids a deadlock with kmmio_lock. + * If this page fault really was due to kmmio trap, + * all hell breaks loose. + */ + printk(KERN_EMERG "mmiotrace: recursive probe hit on CPU %d, " + "for address %lu. Ignoring.\n", + cpu, addr); + goto no_kmmio; + } + ctx->active++; + + /* + * Acquire the kmmio lock to prevent changes affecting + * get_kmmio_fault_page() and get_kmmio_probe(), since we save their + * returned pointers. + * The lock is released in post_kmmio_handler(). + * XXX: could/should get_kmmio_*() be using RCU instead of spinlock? + */ + spin_lock(&kmmio_lock); + + ctx->fpage = get_kmmio_fault_page(addr); + if (!ctx->fpage) { + /* this page fault is not caused by kmmio */ + goto no_kmmio_locked; + } + + ctx->probe = get_kmmio_probe(addr); + ctx->saved_flags = (regs->flags & (TF_MASK|IF_MASK)); + + if (ctx->probe && ctx->probe->pre_handler) + ctx->probe->pre_handler(ctx->probe, regs, addr); + + regs->flags |= TF_MASK; + regs->flags &= ~IF_MASK; + + /* We hold lock, now we set present bit in PTE and single step. */ + disarm_kmmio_fault_page(ctx->fpage->page, NULL); + + return 1; + +no_kmmio_locked: + spin_unlock(&kmmio_lock); + ctx->active--; +no_kmmio: + preempt_enable_no_resched(); + /* page fault not handled by kmmio */ + return 0; +} + +/* + * Interrupts are disabled on entry as trap1 is an interrupt gate + * and they remain disabled thorough out this function. + * And we hold kmmio lock. + */ +static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + struct kmmio_context *ctx = &kmmio_ctx[cpu]; + + if (!ctx->active) + return 0; + + if (ctx->probe && ctx->probe->post_handler) + ctx->probe->post_handler(ctx->probe, condition, regs); + + arm_kmmio_fault_page(ctx->fpage->page, NULL); + + regs->flags &= ~TF_MASK; + regs->flags |= ctx->saved_flags; + + /* These were acquired in kmmio_handler(). */ + ctx->active--; + spin_unlock(&kmmio_lock); + preempt_enable_no_resched(); + + /* + * if somebody else is singlestepping across a probe point, flags + * will have TF set, in which case, continue the remaining processing + * of do_debug, as if this is not a probe hit. + */ + if (regs->flags & TF_MASK) + return 0; + + return 1; +} + +static int add_kmmio_fault_page(unsigned long page) +{ + struct kmmio_fault_page *f; + + page &= PAGE_MASK; + f = get_kmmio_fault_page(page); + if (f) { + f->count++; + return 0; + } + + f = kmalloc(sizeof(*f), GFP_ATOMIC); + if (!f) + return -1; + + f->count = 1; + f->page = page; + list_add(&f->list, + &kmmio_page_table[hash_long(f->page, KMMIO_PAGE_HASH_BITS)]); + + arm_kmmio_fault_page(f->page, NULL); + + return 0; +} + +static void release_kmmio_fault_page(unsigned long page) +{ + struct kmmio_fault_page *f; + + page &= PAGE_MASK; + f = get_kmmio_fault_page(page); + if (!f) + return; + + f->count--; + if (!f->count) { + disarm_kmmio_fault_page(f->page, NULL); + list_del(&f->list); + } +} + +int register_kmmio_probe(struct kmmio_probe *p) +{ + int ret = 0; + unsigned long size = 0; + + spin_lock_irq(&kmmio_lock); + kmmio_count++; + if (get_kmmio_probe(p->addr)) { + ret = -EEXIST; + goto out; + } + list_add(&p->list, &kmmio_probes); + /*printk("adding fault pages...\n");*/ + while (size < p->len) { + if (add_kmmio_fault_page(p->addr + size)) + printk(KERN_ERR "mmio: Unable to set page fault.\n"); + size += PAGE_SIZE; + } + + if (!handler_registered) { + register_page_fault_handler(&kmmio_pf_hook); + handler_registered++; + } + +out: + spin_unlock_irq(&kmmio_lock); + /* + * XXX: What should I do here? + * Here was a call to global_flush_tlb(), but it does not exist + * anymore. + */ + return ret; +} + +void unregister_kmmio_probe(struct kmmio_probe *p) +{ + unsigned long size = 0; + + spin_lock_irq(&kmmio_lock); + while (size < p->len) { + release_kmmio_fault_page(p->addr + size); + size += PAGE_SIZE; + } + list_del(&p->list); + kmmio_count--; + spin_unlock_irq(&kmmio_lock); +} + +/* + * According to 2.6.20, mainly x86_64 arch: + * This is being called from do_page_fault(), via the page fault notifier + * chain. The chain is called for both user space faults and kernel space + * faults (address >= TASK_SIZE64), except not on faults serviced by + * vmalloc_fault(). + * + * We may be in an interrupt or a critical section. Also prefecthing may + * trigger a page fault. We may be in the middle of process switch. + * The page fault hook functionality has put us inside RCU read lock. + * + * Local interrupts are disabled, so preemption cannot happen. + * Do not enable interrupts, do not sleep, and watch out for other CPUs. + */ +static int kmmio_page_fault(struct pt_regs *regs, unsigned long error_code, + unsigned long address) +{ + if (is_kmmio_active()) + if (kmmio_handler(regs, address) == 1) + return -1; + return 0; +} + +static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, + void *args) +{ + struct die_args *arg = args; + + if (val == DIE_DEBUG) + if (post_kmmio_handler(arg->err, arg->regs) == 1) + return NOTIFY_STOP; + + return NOTIFY_DONE; +} diff --git a/arch/x86/kernel/mmiotrace/kmmio.h b/arch/x86/kernel/mmiotrace/kmmio.h new file mode 100644 index 000000000000..85b7f68a3b8a --- /dev/null +++ b/arch/x86/kernel/mmiotrace/kmmio.h @@ -0,0 +1,58 @@ +#ifndef _LINUX_KMMIO_H +#define _LINUX_KMMIO_H + +#include +#include +#include +#include +#include +#include +#include + +struct kmmio_probe; +struct kmmio_fault_page; +struct pt_regs; + +typedef void (*kmmio_pre_handler_t)(struct kmmio_probe *, + struct pt_regs *, unsigned long addr); +typedef void (*kmmio_post_handler_t)(struct kmmio_probe *, + unsigned long condition, struct pt_regs *); + +struct kmmio_probe { + struct list_head list; + + /* start location of the probe point */ + unsigned long addr; + + /* length of the probe region */ + unsigned long len; + + /* Called before addr is executed. */ + kmmio_pre_handler_t pre_handler; + + /* Called after addr is executed, unless... */ + kmmio_post_handler_t post_handler; +}; + +struct kmmio_fault_page { + struct list_head list; + + /* location of the fault page */ + unsigned long page; + + int count; +}; + +/* kmmio is active by some kmmio_probes? */ +static inline int is_kmmio_active(void) +{ + extern unsigned int kmmio_count; + return kmmio_count; +} + +int init_kmmio(void); +void cleanup_kmmio(void); +int register_kmmio_probe(struct kmmio_probe *p); +void unregister_kmmio_probe(struct kmmio_probe *p); + +#endif /* _LINUX_KMMIO_H */ diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c new file mode 100644 index 000000000000..73561fe85f03 --- /dev/null +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -0,0 +1,527 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2005 + * Jeff Muizelaar, 2006, 2007 + * Pekka Paalanen, 2008 + * + * Derived from the read-mod example from relay-examples by Tom Zanussi. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for ISA_START_ADDRESS */ + +#include "kmmio.h" +#include "pf_in.h" + +/* This app's relay channel files will appear in /debug/mmio-trace */ +#define APP_DIR "mmio-trace" +/* the marker injection file in /proc */ +#define MARKER_FILE "mmio-marker" + +#define MODULE_NAME "mmiotrace" + +struct trap_reason { + unsigned long addr; + unsigned long ip; + enum reason_type type; + int active_traces; +}; + +static struct trap_reason pf_reason[NR_CPUS]; +static struct mm_io_header_rw cpu_trace[NR_CPUS]; + +static struct file_operations mmio_fops = { + .owner = THIS_MODULE, +}; + +static const size_t subbuf_size = 256*1024; +static struct rchan *chan; +static struct dentry *dir; +static int suspended; /* XXX should this be per cpu? */ +static struct proc_dir_entry *proc_marker_file; + +/* module parameters */ +static unsigned int n_subbufs = 32*4; +static unsigned long filter_offset; +static int nommiotrace; +static int ISA_trace; +static int trace_pc; + +module_param(n_subbufs, uint, 0); +module_param(filter_offset, ulong, 0); +module_param(nommiotrace, bool, 0); +module_param(ISA_trace, bool, 0); +module_param(trace_pc, bool, 0); + +MODULE_PARM_DESC(n_subbufs, "Number of 256kB buffers, default 128."); +MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); +MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); +MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); +MODULE_PARM_DESC(trace_pc, "Record address of faulting instructions."); + +static void record_timestamp(struct mm_io_header *header) +{ + struct timespec now; + + getnstimeofday(&now); + header->sec = now.tv_sec; + header->nsec = now.tv_nsec; +} + +/* + * Write callback for the /proc entry: + * Read a marker and write it to the mmio trace log + */ +static int write_marker(struct file *file, const char __user *buffer, + unsigned long count, void *data) +{ + char *event = NULL; + struct mm_io_header *headp; + int len = (count > 65535) ? 65535 : count; + + event = kzalloc(sizeof(*headp) + len, GFP_KERNEL); + if (!event) + return -ENOMEM; + + headp = (struct mm_io_header *)event; + headp->type = MMIO_MAGIC | (MMIO_MARKER << MMIO_OPCODE_SHIFT); + headp->data_len = len; + record_timestamp(headp); + + if (copy_from_user(event + sizeof(*headp), buffer, len)) { + kfree(event); + return -EFAULT; + } + + relay_write(chan, event, sizeof(*headp) + len); + kfree(event); + return len; +} + +static void print_pte(unsigned long address) +{ + pgd_t *pgd = pgd_offset_k(address); + pud_t *pud = pud_offset(pgd, address); + pmd_t *pmd = pmd_offset(pud, address); + if (pmd_large(*pmd)) { + printk(KERN_EMERG MODULE_NAME ": 4MB pages are not " + "currently supported: %lx\n", + address); + BUG(); + } + printk(KERN_DEBUG MODULE_NAME ": pte for 0x%lx: 0x%lx 0x%lx\n", + address, + pte_val(*pte_offset_kernel(pmd, address)), + pte_val(*pte_offset_kernel(pmd, address)) & _PAGE_PRESENT); +} + +/* + * For some reason the pre/post pairs have been called in an + * unmatched order. Report and die. + */ +static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) +{ + const unsigned long cpu = smp_processor_id(); + printk(KERN_EMERG MODULE_NAME ": unexpected fault for address: %lx, " + "last fault for address: %lx\n", + addr, pf_reason[cpu].addr); + print_pte(addr); +#ifdef __i386__ + print_symbol(KERN_EMERG "faulting EIP is at %s\n", regs->ip); + print_symbol(KERN_EMERG "last faulting EIP was at %s\n", + pf_reason[cpu].ip); + printk(KERN_EMERG + "eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", + regs->ax, regs->bx, regs->cx, regs->dx); + printk(KERN_EMERG + "esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", + regs->si, regs->di, regs->bp, regs->sp); +#else + print_symbol(KERN_EMERG "faulting RIP is at %s\n", regs->ip); + print_symbol(KERN_EMERG "last faulting RIP was at %s\n", + pf_reason[cpu].ip); + printk(KERN_EMERG "rax: %016lx rcx: %016lx rdx: %016lx\n", + regs->ax, regs->cx, regs->dx); + printk(KERN_EMERG "rsi: %016lx rdi: %016lx " + "rbp: %016lx rsp: %016lx\n", + regs->si, regs->di, regs->bp, regs->sp); +#endif + BUG(); +} + +static void pre(struct kmmio_probe *p, struct pt_regs *regs, + unsigned long addr) +{ + const unsigned long cpu = smp_processor_id(); + const unsigned long instptr = instruction_pointer(regs); + const enum reason_type type = get_ins_type(instptr); + + /* it doesn't make sense to have more than one active trace per cpu */ + if (pf_reason[cpu].active_traces) + die_kmmio_nesting_error(regs, addr); + else + pf_reason[cpu].active_traces++; + + pf_reason[cpu].type = type; + pf_reason[cpu].addr = addr; + pf_reason[cpu].ip = instptr; + + cpu_trace[cpu].header.type = MMIO_MAGIC; + cpu_trace[cpu].header.pid = 0; + cpu_trace[cpu].header.data_len = sizeof(struct mm_io_rw); + cpu_trace[cpu].rw.address = addr; + + /* + * Only record the program counter when requested. + * It may taint clean-room reverse engineering. + */ + if (trace_pc) + cpu_trace[cpu].rw.pc = instptr; + else + cpu_trace[cpu].rw.pc = 0; + + record_timestamp(&cpu_trace[cpu].header); + + switch (type) { + case REG_READ: + cpu_trace[cpu].header.type |= + (MMIO_READ << MMIO_OPCODE_SHIFT) | + (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); + break; + case REG_WRITE: + cpu_trace[cpu].header.type |= + (MMIO_WRITE << MMIO_OPCODE_SHIFT) | + (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); + cpu_trace[cpu].rw.value = get_ins_reg_val(instptr, regs); + break; + case IMM_WRITE: + cpu_trace[cpu].header.type |= + (MMIO_WRITE << MMIO_OPCODE_SHIFT) | + (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); + cpu_trace[cpu].rw.value = get_ins_imm_val(instptr); + break; + default: + { + unsigned char *ip = (unsigned char *)instptr; + cpu_trace[cpu].header.type |= + (MMIO_UNKNOWN_OP << MMIO_OPCODE_SHIFT); + cpu_trace[cpu].rw.value = (*ip) << 16 | + *(ip + 1) << 8 | + *(ip + 2); + } + } +} + +static void post(struct kmmio_probe *p, unsigned long condition, + struct pt_regs *regs) +{ + const unsigned long cpu = smp_processor_id(); + + /* this should always return the active_trace count to 0 */ + pf_reason[cpu].active_traces--; + if (pf_reason[cpu].active_traces) { + printk(KERN_EMERG MODULE_NAME ": unexpected post handler"); + BUG(); + } + + switch (pf_reason[cpu].type) { + case REG_READ: + cpu_trace[cpu].rw.value = get_ins_reg_val(pf_reason[cpu].ip, + regs); + break; + default: + break; + } + relay_write(chan, &cpu_trace[cpu], sizeof(struct mm_io_header_rw)); +} + +/* + * subbuf_start() relay callback. + * + * Defined so that we know when events are dropped due to the buffer-full + * condition. + */ +static int subbuf_start_handler(struct rchan_buf *buf, void *subbuf, + void *prev_subbuf, size_t prev_padding) +{ + if (relay_buf_full(buf)) { + if (!suspended) { + suspended = 1; + printk(KERN_ERR MODULE_NAME + ": cpu %d buffer full!!!\n", + smp_processor_id()); + } + return 0; + } else if (suspended) { + suspended = 0; + printk(KERN_ERR MODULE_NAME + ": cpu %d buffer no longer full.\n", + smp_processor_id()); + } + + return 1; +} + +/* file_create() callback. Creates relay file in debugfs. */ +static struct dentry *create_buf_file_handler(const char *filename, + struct dentry *parent, + int mode, + struct rchan_buf *buf, + int *is_global) +{ + struct dentry *buf_file; + + mmio_fops.read = relay_file_operations.read; + mmio_fops.open = relay_file_operations.open; + mmio_fops.poll = relay_file_operations.poll; + mmio_fops.mmap = relay_file_operations.mmap; + mmio_fops.release = relay_file_operations.release; + mmio_fops.splice_read = relay_file_operations.splice_read; + + buf_file = debugfs_create_file(filename, mode, parent, buf, + &mmio_fops); + + return buf_file; +} + +/* file_remove() default callback. Removes relay file in debugfs. */ +static int remove_buf_file_handler(struct dentry *dentry) +{ + debugfs_remove(dentry); + return 0; +} + +static struct rchan_callbacks relay_callbacks = { + .subbuf_start = subbuf_start_handler, + .create_buf_file = create_buf_file_handler, + .remove_buf_file = remove_buf_file_handler, +}; + +/* + * create_channel - creates channel /debug/APP_DIR/cpuXXX + * Returns channel on success, NULL otherwise + */ +static struct rchan *create_channel(unsigned size, unsigned n) +{ + return relay_open("cpu", dir, size, n, &relay_callbacks, NULL); +} + +/* destroy_channel - destroys channel /debug/APP_DIR/cpuXXX */ +static void destroy_channel(void) +{ + if (chan) { + relay_close(chan); + chan = NULL; + } +} + +struct remap_trace { + struct list_head list; + struct kmmio_probe probe; +}; +static LIST_HEAD(trace_list); +static DEFINE_SPINLOCK(trace_list_lock); + +static void do_ioremap_trace_core(unsigned long offset, unsigned long size, + void __iomem *addr) +{ + struct remap_trace *trace = kmalloc(sizeof(*trace), GFP_KERNEL); + struct mm_io_header_map event = { + .header = { + .type = MMIO_MAGIC | + (MMIO_PROBE << MMIO_OPCODE_SHIFT), + .sec = 0, + .nsec = 0, + .pid = 0, + .data_len = sizeof(struct mm_io_map) + }, + .map = { + .phys = offset, + .addr = (unsigned long)addr, + .len = size, + .pc = 0 + } + }; + record_timestamp(&event.header); + + *trace = (struct remap_trace) { + .probe = { + .addr = (unsigned long)addr, + .len = size, + .pre_handler = pre, + .post_handler = post, + } + }; + + relay_write(chan, &event, sizeof(event)); + spin_lock(&trace_list_lock); + list_add_tail(&trace->list, &trace_list); + spin_unlock(&trace_list_lock); + if (!nommiotrace) + register_kmmio_probe(&trace->probe); +} + +static void ioremap_trace_core(unsigned long offset, unsigned long size, + void __iomem *addr) +{ + if ((filter_offset) && (offset != filter_offset)) + return; + + /* Don't trace the low PCI/ISA area, it's always mapped.. */ + if (!ISA_trace && (offset < ISA_END_ADDRESS) && + (offset + size > ISA_START_ADDRESS)) { + printk(KERN_NOTICE MODULE_NAME ": Ignoring map of low " + "PCI/ISA area (0x%lx-0x%lx)\n", + offset, offset + size); + return; + } + do_ioremap_trace_core(offset, size, addr); +} + +void __iomem *ioremap_cache_trace(unsigned long offset, unsigned long size) +{ + void __iomem *p = ioremap_cache(offset, size); + printk(KERN_DEBUG MODULE_NAME ": ioremap_cache(0x%lx, 0x%lx) = %p\n", + offset, size, p); + ioremap_trace_core(offset, size, p); + return p; +} +EXPORT_SYMBOL(ioremap_cache_trace); + +void __iomem *ioremap_nocache_trace(unsigned long offset, unsigned long size) +{ + void __iomem *p = ioremap_nocache(offset, size); + printk(KERN_DEBUG MODULE_NAME ": ioremap_nocache(0x%lx, 0x%lx) = %p\n", + offset, size, p); + ioremap_trace_core(offset, size, p); + return p; +} +EXPORT_SYMBOL(ioremap_nocache_trace); + +void iounmap_trace(volatile void __iomem *addr) +{ + struct mm_io_header_map event = { + .header = { + .type = MMIO_MAGIC | + (MMIO_UNPROBE << MMIO_OPCODE_SHIFT), + .sec = 0, + .nsec = 0, + .pid = 0, + .data_len = sizeof(struct mm_io_map) + }, + .map = { + .phys = 0, + .addr = (unsigned long)addr, + .len = 0, + .pc = 0 + } + }; + struct remap_trace *trace; + struct remap_trace *tmp; + printk(KERN_DEBUG MODULE_NAME ": Unmapping %p.\n", addr); + record_timestamp(&event.header); + + spin_lock(&trace_list_lock); + list_for_each_entry_safe(trace, tmp, &trace_list, list) { + if ((unsigned long)addr == trace->probe.addr) { + if (!nommiotrace) + unregister_kmmio_probe(&trace->probe); + list_del(&trace->list); + kfree(trace); + break; + } + } + spin_unlock(&trace_list_lock); + relay_write(chan, &event, sizeof(event)); + iounmap(addr); +} +EXPORT_SYMBOL(iounmap_trace); + +static void clear_trace_list(void) +{ + struct remap_trace *trace; + struct remap_trace *tmp; + + spin_lock(&trace_list_lock); + list_for_each_entry_safe(trace, tmp, &trace_list, list) { + printk(KERN_WARNING MODULE_NAME ": purging non-iounmapped " + "trace @0x%08lx, size 0x%lx.\n", + trace->probe.addr, trace->probe.len); + if (!nommiotrace) + unregister_kmmio_probe(&trace->probe); + list_del(&trace->list); + kfree(trace); + break; + } + spin_unlock(&trace_list_lock); +} + +static int __init init(void) +{ + if (n_subbufs < 2) + return -EINVAL; + + dir = debugfs_create_dir(APP_DIR, NULL); + if (!dir) { + printk(KERN_ERR MODULE_NAME + ": Couldn't create relay app directory.\n"); + return -ENOMEM; + } + + chan = create_channel(subbuf_size, n_subbufs); + if (!chan) { + debugfs_remove(dir); + printk(KERN_ERR MODULE_NAME + ": relay app channel creation failed\n"); + return -ENOMEM; + } + + init_kmmio(); + + proc_marker_file = create_proc_entry(MARKER_FILE, 0, NULL); + if (proc_marker_file) + proc_marker_file->write_proc = write_marker; + + printk(KERN_DEBUG MODULE_NAME ": loaded.\n"); + if (nommiotrace) + printk(KERN_DEBUG MODULE_NAME ": MMIO tracing disabled.\n"); + if (ISA_trace) + printk(KERN_WARNING MODULE_NAME + ": Warning! low ISA range will be traced.\n"); + return 0; +} + +static void __exit cleanup(void) +{ + printk(KERN_DEBUG MODULE_NAME ": unload...\n"); + clear_trace_list(); + cleanup_kmmio(); + remove_proc_entry(MARKER_FILE, NULL); + destroy_channel(); + if (dir) + debugfs_remove(dir); +} + +module_init(init); +module_exit(cleanup); +MODULE_LICENSE("GPL"); diff --git a/arch/x86/kernel/mmiotrace/pf_in.c b/arch/x86/kernel/mmiotrace/pf_in.c new file mode 100644 index 000000000000..67ea520dde62 --- /dev/null +++ b/arch/x86/kernel/mmiotrace/pf_in.c @@ -0,0 +1,489 @@ +/* + * Fault Injection Test harness (FI) + * Copyright (C) Intel Crop. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + * + */ + +/* $Id: pf_in.c,v 1.1.1.1 2002/11/12 05:56:32 brlock Exp $ + * Copyright by Intel Crop., 2002 + * Louis Zhuang (louis.zhuang@intel.com) + * + * Bjorn Steinbrink (B.Steinbrink@gmx.de), 2007 + */ + +#include +#include /* struct pt_regs */ +#include "pf_in.h" + +#ifdef __i386__ +/* IA32 Manual 3, 2-1 */ +static unsigned char prefix_codes[] = { + 0xF0, 0xF2, 0xF3, 0x2E, 0x36, 0x3E, 0x26, 0x64, + 0x65, 0x2E, 0x3E, 0x66, 0x67 +}; +/* IA32 Manual 3, 3-432*/ +static unsigned int reg_rop[] = { + 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +static unsigned int reg_wop[] = { 0x88, 0x89 }; +static unsigned int imm_wop[] = { 0xC6, 0xC7 }; +/* IA32 Manual 3, 3-432*/ +static unsigned int rw8[] = { 0x88, 0x8A, 0xC6 }; +static unsigned int rw32[] = { + 0x89, 0x8B, 0xC7, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +static unsigned int mw8[] = { 0x88, 0x8A, 0xC6, 0xB60F, 0xBE0F }; +static unsigned int mw16[] = { 0xB70F, 0xBF0F }; +static unsigned int mw32[] = { 0x89, 0x8B, 0xC7 }; +static unsigned int mw64[] = {}; +#else /* not __i386__ */ +static unsigned char prefix_codes[] = { + 0x66, 0x67, 0x2E, 0x3E, 0x26, 0x64, 0x65, 0x36, + 0xF0, 0xF3, 0xF2, + /* REX Prefixes */ + 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f +}; +/* AMD64 Manual 3, Appendix A*/ +static unsigned int reg_rop[] = { + 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +static unsigned int reg_wop[] = { 0x88, 0x89 }; +static unsigned int imm_wop[] = { 0xC6, 0xC7 }; +static unsigned int rw8[] = { 0xC6, 0x88, 0x8A }; +static unsigned int rw32[] = { + 0xC7, 0x89, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +/* 8 bit only */ +static unsigned int mw8[] = { 0xC6, 0x88, 0x8A, 0xB60F, 0xBE0F }; +/* 16 bit only */ +static unsigned int mw16[] = { 0xB70F, 0xBF0F }; +/* 16 or 32 bit */ +static unsigned int mw32[] = { 0xC7 }; +/* 16, 32 or 64 bit */ +static unsigned int mw64[] = { 0x89, 0x8B }; +#endif /* not __i386__ */ + +static int skip_prefix(unsigned char *addr, int *shorted, int *enlarged, + int *rexr) +{ + int i; + unsigned char *p = addr; + *shorted = 0; + *enlarged = 0; + *rexr = 0; + +restart: + for (i = 0; i < ARRAY_SIZE(prefix_codes); i++) { + if (*p == prefix_codes[i]) { + if (*p == 0x66) + *shorted = 1; +#ifdef __amd64__ + if ((*p & 0xf8) == 0x48) + *enlarged = 1; + if ((*p & 0xf4) == 0x44) + *rexr = 1; +#endif + p++; + goto restart; + } + } + + return (p - addr); +} + +static int get_opcode(unsigned char *addr, unsigned int *opcode) +{ + int len; + + if (*addr == 0x0F) { + /* 0x0F is extension instruction */ + *opcode = *(unsigned short *)addr; + len = 2; + } else { + *opcode = *addr; + len = 1; + } + + return len; +} + +#define CHECK_OP_TYPE(opcode, array, type) \ + for (i = 0; i < ARRAY_SIZE(array); i++) { \ + if (array[i] == opcode) { \ + rv = type; \ + goto exit; \ + } \ + } + +enum reason_type get_ins_type(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char *p; + int shorted, enlarged, rexr; + int i; + enum reason_type rv = OTHERS; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + + CHECK_OP_TYPE(opcode, reg_rop, REG_READ); + CHECK_OP_TYPE(opcode, reg_wop, REG_WRITE); + CHECK_OP_TYPE(opcode, imm_wop, IMM_WRITE); + +exit: + return rv; +} +#undef CHECK_OP_TYPE + +static unsigned int get_ins_reg_width(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char *p; + int i, shorted, enlarged, rexr; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + + for (i = 0; i < ARRAY_SIZE(rw8); i++) + if (rw8[i] == opcode) + return 1; + + for (i = 0; i < ARRAY_SIZE(rw32); i++) + if (rw32[i] == opcode) + return (shorted ? 2 : (enlarged ? 8 : 4)); + + printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); + return 0; +} + +unsigned int get_ins_mem_width(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char *p; + int i, shorted, enlarged, rexr; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + + for (i = 0; i < ARRAY_SIZE(mw8); i++) + if (mw8[i] == opcode) + return 1; + + for (i = 0; i < ARRAY_SIZE(mw16); i++) + if (mw16[i] == opcode) + return 2; + + for (i = 0; i < ARRAY_SIZE(mw32); i++) + if (mw32[i] == opcode) + return shorted ? 2 : 4; + + for (i = 0; i < ARRAY_SIZE(mw64); i++) + if (mw64[i] == opcode) + return shorted ? 2 : (enlarged ? 8 : 4); + + printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); + return 0; +} + +/* + * Define register ident in mod/rm byte. + * Note: these are NOT the same as in ptrace-abi.h. + */ +enum { + arg_AL = 0, + arg_CL = 1, + arg_DL = 2, + arg_BL = 3, + arg_AH = 4, + arg_CH = 5, + arg_DH = 6, + arg_BH = 7, + + arg_AX = 0, + arg_CX = 1, + arg_DX = 2, + arg_BX = 3, + arg_SP = 4, + arg_BP = 5, + arg_SI = 6, + arg_DI = 7, +#ifdef __amd64__ + arg_R8 = 8, + arg_R9 = 9, + arg_R10 = 10, + arg_R11 = 11, + arg_R12 = 12, + arg_R13 = 13, + arg_R14 = 14, + arg_R15 = 15 +#endif +}; + +static unsigned char *get_reg_w8(int no, struct pt_regs *regs) +{ + unsigned char *rv = NULL; + + switch (no) { + case arg_AL: + rv = (unsigned char *)®s->ax; + break; + case arg_BL: + rv = (unsigned char *)®s->bx; + break; + case arg_CL: + rv = (unsigned char *)®s->cx; + break; + case arg_DL: + rv = (unsigned char *)®s->dx; + break; + case arg_AH: + rv = 1 + (unsigned char *)®s->ax; + break; + case arg_BH: + rv = 1 + (unsigned char *)®s->bx; + break; + case arg_CH: + rv = 1 + (unsigned char *)®s->cx; + break; + case arg_DH: + rv = 1 + (unsigned char *)®s->dx; + break; +#ifdef __amd64__ + case arg_R8: + rv = (unsigned char *)®s->r8; + break; + case arg_R9: + rv = (unsigned char *)®s->r9; + break; + case arg_R10: + rv = (unsigned char *)®s->r10; + break; + case arg_R11: + rv = (unsigned char *)®s->r11; + break; + case arg_R12: + rv = (unsigned char *)®s->r12; + break; + case arg_R13: + rv = (unsigned char *)®s->r13; + break; + case arg_R14: + rv = (unsigned char *)®s->r14; + break; + case arg_R15: + rv = (unsigned char *)®s->r15; + break; +#endif + default: + printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); + break; + } + return rv; +} + +static unsigned long *get_reg_w32(int no, struct pt_regs *regs) +{ + unsigned long *rv = NULL; + + switch (no) { + case arg_AX: + rv = ®s->ax; + break; + case arg_BX: + rv = ®s->bx; + break; + case arg_CX: + rv = ®s->cx; + break; + case arg_DX: + rv = ®s->dx; + break; + case arg_SP: + rv = ®s->sp; + break; + case arg_BP: + rv = ®s->bp; + break; + case arg_SI: + rv = ®s->si; + break; + case arg_DI: + rv = ®s->di; + break; +#ifdef __amd64__ + case arg_R8: + rv = ®s->r8; + break; + case arg_R9: + rv = ®s->r9; + break; + case arg_R10: + rv = ®s->r10; + break; + case arg_R11: + rv = ®s->r11; + break; + case arg_R12: + rv = ®s->r12; + break; + case arg_R13: + rv = ®s->r13; + break; + case arg_R14: + rv = ®s->r14; + break; + case arg_R15: + rv = ®s->r15; + break; +#endif + default: + printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); + } + + return rv; +} + +unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs) +{ + unsigned int opcode; + unsigned char mod_rm; + int reg; + unsigned char *p; + int i, shorted, enlarged, rexr; + unsigned long rv; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + for (i = 0; i < ARRAY_SIZE(reg_rop); i++) + if (reg_rop[i] == opcode) { + rv = REG_READ; + goto do_work; + } + + for (i = 0; i < ARRAY_SIZE(reg_wop); i++) + if (reg_wop[i] == opcode) { + rv = REG_WRITE; + goto do_work; + } + + printk(KERN_ERR "mmiotrace: Not a register instruction, opcode " + "0x%02x\n", opcode); + goto err; + +do_work: + mod_rm = *p; + reg = ((mod_rm >> 3) & 0x7) | (rexr << 3); + switch (get_ins_reg_width(ins_addr)) { + case 1: + return *get_reg_w8(reg, regs); + + case 2: + return *(unsigned short *)get_reg_w32(reg, regs); + + case 4: + return *(unsigned int *)get_reg_w32(reg, regs); + +#ifdef __amd64__ + case 8: + return *(unsigned long *)get_reg_w32(reg, regs); +#endif + + default: + printk(KERN_ERR "mmiotrace: Error width# %d\n", reg); + } + +err: + return 0; +} + +unsigned long get_ins_imm_val(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char mod_rm; + unsigned char mod; + unsigned char *p; + int i, shorted, enlarged, rexr; + unsigned long rv; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + for (i = 0; i < ARRAY_SIZE(imm_wop); i++) + if (imm_wop[i] == opcode) { + rv = IMM_WRITE; + goto do_work; + } + + printk(KERN_ERR "mmiotrace: Not an immediate instruction, opcode " + "0x%02x\n", opcode); + goto err; + +do_work: + mod_rm = *p; + mod = mod_rm >> 6; + p++; + switch (mod) { + case 0: + /* if r/m is 5 we have a 32 disp (IA32 Manual 3, Table 2-2) */ + /* AMD64: XXX Check for address size prefix? */ + if ((mod_rm & 0x7) == 0x5) + p += 4; + break; + + case 1: + p += 1; + break; + + case 2: + p += 4; + break; + + case 3: + default: + printk(KERN_ERR "mmiotrace: not a memory access instruction " + "at 0x%lx, rm_mod=0x%02x\n", + ins_addr, mod_rm); + } + + switch (get_ins_reg_width(ins_addr)) { + case 1: + return *(unsigned char *)p; + + case 2: + return *(unsigned short *)p; + + case 4: + return *(unsigned int *)p; + +#ifdef __amd64__ + case 8: + return *(unsigned long *)p; +#endif + + default: + printk(KERN_ERR "mmiotrace: Error: width.\n"); + } + +err: + return 0; +} diff --git a/arch/x86/kernel/mmiotrace/pf_in.h b/arch/x86/kernel/mmiotrace/pf_in.h new file mode 100644 index 000000000000..e05341a51a27 --- /dev/null +++ b/arch/x86/kernel/mmiotrace/pf_in.h @@ -0,0 +1,39 @@ +/* + * Fault Injection Test harness (FI) + * Copyright (C) Intel Crop. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + * + */ + +#ifndef __PF_H_ +#define __PF_H_ + +enum reason_type { + NOT_ME, /* page fault is not in regions */ + NOTHING, /* access others point in regions */ + REG_READ, /* read from addr to reg */ + REG_WRITE, /* write from reg to addr */ + IMM_WRITE, /* write from imm to addr */ + OTHERS /* Other instructions can not intercept */ +}; + +enum reason_type get_ins_type(unsigned long ins_addr); +unsigned int get_ins_mem_width(unsigned long ins_addr); +unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs); +unsigned long get_ins_imm_val(unsigned long ins_addr); + +#endif /* __PF_H_ */ diff --git a/arch/x86/kernel/mmiotrace/testmmiotrace.c b/arch/x86/kernel/mmiotrace/testmmiotrace.c new file mode 100644 index 000000000000..40e66b0e6480 --- /dev/null +++ b/arch/x86/kernel/mmiotrace/testmmiotrace.c @@ -0,0 +1,77 @@ +/* + * Written by Pekka Paalanen, 2008 + */ +#include +#include + +extern void __iomem *ioremap_nocache_trace(unsigned long offset, + unsigned long size); +extern void iounmap_trace(volatile void __iomem *addr); + +#define MODULE_NAME "testmmiotrace" + +static unsigned long mmio_address; +module_param(mmio_address, ulong, 0); +MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB."); + +static void do_write_test(void __iomem *p) +{ + unsigned int i; + for (i = 0; i < 256; i++) + iowrite8(i, p + i); + for (i = 1024; i < (5 * 1024); i += 2) + iowrite16(i * 12 + 7, p + i); + for (i = (5 * 1024); i < (16 * 1024); i += 4) + iowrite32(i * 212371 + 13, p + i); +} + +static void do_read_test(void __iomem *p) +{ + unsigned int i; + volatile unsigned int v; + for (i = 0; i < 256; i++) + v = ioread8(p + i); + for (i = 1024; i < (5 * 1024); i += 2) + v = ioread16(p + i); + for (i = (5 * 1024); i < (16 * 1024); i += 4) + v = ioread32(p + i); +} + +static void do_test(void) +{ + void __iomem *p = ioremap_nocache_trace(mmio_address, 0x4000); + if (!p) { + printk(KERN_ERR MODULE_NAME ": could not ioremap IO memory, " + "aborting.\n"); + return; + } + do_write_test(p); + do_read_test(p); + iounmap_trace(p); +} + +static int __init init(void) +{ + if (mmio_address == 0) { + printk(KERN_ERR MODULE_NAME ": you have to use the module " + "argument mmio_address.\n"); + printk(KERN_ERR MODULE_NAME ": DO NOT LOAD THIS MODULE UNLESS" + " YOU REALLY KNOW WHAT YOU ARE DOING!\n"); + return -ENXIO; + } + + printk(KERN_WARNING MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx " + "in PCI address space, and writing " + "rubbish in there.\n", mmio_address); + do_test(); + return 0; +} + +static void __exit cleanup(void) +{ + printk(KERN_DEBUG MODULE_NAME ": unloaded.\n"); +} + +module_init(init); +module_exit(cleanup); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h new file mode 100644 index 000000000000..cb247825f3ec --- /dev/null +++ b/include/linux/mmiotrace.h @@ -0,0 +1,62 @@ +#ifndef MMIOTRACE_H +#define MMIOTRACE_H + +#include + +#define MMIO_VERSION 0x04 + +/* mm_io_header.type */ +#define MMIO_OPCODE_MASK 0xff +#define MMIO_OPCODE_SHIFT 0 +#define MMIO_WIDTH_MASK 0xff00 +#define MMIO_WIDTH_SHIFT 8 +#define MMIO_MAGIC (0x6f000000 | (MMIO_VERSION<<16)) +#define MMIO_MAGIC_MASK 0xffff0000 + +enum mm_io_opcode { /* payload type: */ + MMIO_READ = 0x1, /* struct mm_io_rw */ + MMIO_WRITE = 0x2, /* struct mm_io_rw */ + MMIO_PROBE = 0x3, /* struct mm_io_map */ + MMIO_UNPROBE = 0x4, /* struct mm_io_map */ + MMIO_MARKER = 0x5, /* raw char data */ + MMIO_UNKNOWN_OP = 0x6, /* struct mm_io_rw */ +}; + +struct mm_io_header { + __u32 type; + __u32 sec; /* timestamp */ + __u32 nsec; + __u32 pid; /* PID of the process, or 0 for kernel core */ + __u16 data_len; /* length of the following payload */ +}; + +struct mm_io_rw { + __u64 address; /* virtual address of register */ + __u64 value; + __u64 pc; /* optional program counter */ +}; + +struct mm_io_map { + __u64 phys; /* base address in PCI space */ + __u64 addr; /* base virtual address */ + __u64 len; /* mapping size */ + __u64 pc; /* optional program counter */ +}; + + +/* + * These structures are used to allow a single relay_write() + * call to write a full packet. + */ + +struct mm_io_header_rw { + struct mm_io_header header; + struct mm_io_rw rw; +} __attribute__((packed)); + +struct mm_io_header_map { + struct mm_io_header header; + struct mm_io_map map; +} __attribute__((packed)); + +#endif /* MMIOTRACE_H */ -- cgit v1.2.3 From 75bb88350e0501b3cf5ac096a1008757844414a9 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:56 +0200 Subject: x86 mmiotrace: use lookup_address() Use lookup_address() from pageattr.c instead of doing the same manually. Also had to EXPORT_SYMBOL_GPL(lookup_address) to make this work for modules. This also fixes "undefined symbol 'init_mm'" compile error for x86_32. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mmiotrace/kmmio.c | 46 ++++++++++++++++++++++++------------ arch/x86/kernel/mmiotrace/mmio-mod.c | 19 +++++++++------ arch/x86/mm/pageattr.c | 1 + 3 files changed, 44 insertions(+), 22 deletions(-) diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index 8ba48f9c91b4..28411dadb8b3 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "kmmio.h" @@ -117,40 +118,55 @@ static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) return NULL; } -static void arm_kmmio_fault_page(unsigned long page, int *large) +static void arm_kmmio_fault_page(unsigned long page, int *page_level) { unsigned long address = page & PAGE_MASK; - pgd_t *pgd = pgd_offset_k(address); - pud_t *pud = pud_offset(pgd, address); - pmd_t *pmd = pmd_offset(pud, address); - pte_t *pte = pte_offset_kernel(pmd, address); + int level; + pte_t *pte = lookup_address(address, &level); - if (pmd_large(*pmd)) { + if (!pte) { + printk(KERN_ERR "Error in %s: no pte for page 0x%08lx\n", + __FUNCTION__, page); + return; + } + + if (level == PG_LEVEL_2M) { + pmd_t *pmd = (pmd_t *)pte; set_pmd(pmd, __pmd(pmd_val(*pmd) & ~_PAGE_PRESENT)); - if (large) - *large = 1; } else { + /* PG_LEVEL_4K */ set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT)); } + if (page_level) + *page_level = level; + __flush_tlb_one(page); } -static void disarm_kmmio_fault_page(unsigned long page, int *large) +static void disarm_kmmio_fault_page(unsigned long page, int *page_level) { unsigned long address = page & PAGE_MASK; - pgd_t *pgd = pgd_offset_k(address); - pud_t *pud = pud_offset(pgd, address); - pmd_t *pmd = pmd_offset(pud, address); - pte_t *pte = pte_offset_kernel(pmd, address); + int level; + pte_t *pte = lookup_address(address, &level); - if (large && *large) { + if (!pte) { + printk(KERN_ERR "Error in %s: no pte for page 0x%08lx\n", + __FUNCTION__, page); + return; + } + + if (level == PG_LEVEL_2M) { + pmd_t *pmd = (pmd_t *)pte; set_pmd(pmd, __pmd(pmd_val(*pmd) | _PAGE_PRESENT)); - *large = 0; } else { + /* PG_LEVEL_4K */ set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT)); } + if (page_level) + *page_level = level; + __flush_tlb_one(page); } diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index 73561fe85f03..e43947d218a5 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -120,19 +120,24 @@ static int write_marker(struct file *file, const char __user *buffer, static void print_pte(unsigned long address) { - pgd_t *pgd = pgd_offset_k(address); - pud_t *pud = pud_offset(pgd, address); - pmd_t *pmd = pmd_offset(pud, address); - if (pmd_large(*pmd)) { + int level; + pte_t *pte = lookup_address(address, &level); + + if (!pte) { + printk(KERN_ERR "Error in %s: no pte for page 0x%08lx\n", + __FUNCTION__, address); + return; + } + + if (level == PG_LEVEL_2M) { printk(KERN_EMERG MODULE_NAME ": 4MB pages are not " "currently supported: %lx\n", address); BUG(); } printk(KERN_DEBUG MODULE_NAME ": pte for 0x%lx: 0x%lx 0x%lx\n", - address, - pte_val(*pte_offset_kernel(pmd, address)), - pte_val(*pte_offset_kernel(pmd, address)) & _PAGE_PRESENT); + address, pte_val(*pte), + pte_val(*pte) & _PAGE_PRESENT); } /* diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 60bcb5b6a37e..57970f2935c0 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -227,6 +227,7 @@ pte_t *lookup_address(unsigned long address, unsigned int *level) return pte_offset_kernel(pmd, address); } +EXPORT_SYMBOL_GPL(lookup_address); /* * Set the new pmd in all the pgds we know about: -- cgit v1.2.3 From fe1ffafa80f6673101c6560c2bacfe3df10372ee Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:56 +0200 Subject: x86 mmiotrace: fix relay-buffer-full flag for SMP Relay has per-cpu buffers, but mmiotrace was using only a single flag for detecting buffer full/not-full transitions. The new code makes this per-cpu and actually counts missed events. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mmiotrace/mmio-mod.c | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index e43947d218a5..0019dcdf6158 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -29,6 +29,7 @@ #include #include #include /* for ISA_START_ADDRESS */ +#include #include "kmmio.h" #include "pf_in.h" @@ -47,9 +48,13 @@ struct trap_reason { int active_traces; }; +/* Accessed per-cpu. */ static struct trap_reason pf_reason[NR_CPUS]; static struct mm_io_header_rw cpu_trace[NR_CPUS]; +/* Access to this is not per-cpu. */ +static atomic_t dropped[NR_CPUS]; + static struct file_operations mmio_fops = { .owner = THIS_MODULE, }; @@ -57,7 +62,6 @@ static struct file_operations mmio_fops = { static const size_t subbuf_size = 256*1024; static struct rchan *chan; static struct dentry *dir; -static int suspended; /* XXX should this be per cpu? */ static struct proc_dir_entry *proc_marker_file; /* module parameters */ @@ -269,19 +273,21 @@ static void post(struct kmmio_probe *p, unsigned long condition, static int subbuf_start_handler(struct rchan_buf *buf, void *subbuf, void *prev_subbuf, size_t prev_padding) { + unsigned int cpu = buf->cpu; + atomic_t *drop = &dropped[cpu]; + int count; if (relay_buf_full(buf)) { - if (!suspended) { - suspended = 1; - printk(KERN_ERR MODULE_NAME - ": cpu %d buffer full!!!\n", - smp_processor_id()); + if (atomic_inc_return(drop) == 1) { + printk(KERN_ERR MODULE_NAME ": cpu %d buffer full!\n", + cpu); } return 0; - } else if (suspended) { - suspended = 0; + } else if ((count = atomic_read(drop))) { printk(KERN_ERR MODULE_NAME - ": cpu %d buffer no longer full.\n", - smp_processor_id()); + ": cpu %d buffer no longer full, " + "missed %d events.\n", + cpu, count); + atomic_sub(count, drop); } return 1; -- cgit v1.2.3 From 63ffa3e456c1a9884a3ebac997d91e3fdae18d78 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:57 +0200 Subject: x86 mmiotrace: comment about user space ABI Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/mmiotrace.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h index cb247825f3ec..6ec288f1fe24 100644 --- a/include/linux/mmiotrace.h +++ b/include/linux/mmiotrace.h @@ -3,6 +3,10 @@ #include +/* + * If you change anything here, you must bump MMIO_VERSION. + * This is the relay data format for user space. + */ #define MMIO_VERSION 0x04 /* mm_io_header.type */ @@ -23,7 +27,7 @@ enum mm_io_opcode { /* payload type: */ }; struct mm_io_header { - __u32 type; + __u32 type; /* see MMIO_* macros above */ __u32 sec; /* timestamp */ __u32 nsec; __u32 pid; /* PID of the process, or 0 for kernel core */ -- cgit v1.2.3 From 10c43d2eb50c9a5ad60388b9d3c41c31150049e6 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:57 +0200 Subject: x86: explicit call to mmiotrace in do_page_fault() The custom page fault handler list is replaced with a single function pointer. All related functions and variables are renamed for mmiotrace. Signed-off-by: Pekka Paalanen Cc: Christoph Hellwig Cc: Arjan van de Ven Cc: pq@iki.fi Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 14 ++++----- arch/x86/kernel/mmiotrace/kmmio.c | 14 ++++----- arch/x86/mm/fault.c | 66 ++++++++++++++++++++------------------- include/asm-x86/kdebug.h | 12 +++---- 4 files changed, 52 insertions(+), 54 deletions(-) diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 7c6496e2225e..9491c0ae03a3 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -168,20 +168,18 @@ config IOMMU_LEAK Add a simple leak tracer to the IOMMU code. This is useful when you are debugging a buggy device driver that leaks IOMMU mappings. -config PAGE_FAULT_HANDLERS - bool "Custom page fault handlers" - depends on DEBUG_KERNEL - help - Allow the use of custom page fault handlers. A kernel module may - register a function that is called on every page fault. Custom - handlers are used by some debugging and reverse engineering tools. +config MMIOTRACE_HOOKS + bool + default n config MMIOTRACE tristate "Memory mapped IO tracing" - depends on DEBUG_KERNEL && PAGE_FAULT_HANDLERS && RELAY && DEBUG_FS + depends on DEBUG_KERNEL && RELAY && DEBUG_FS + select MMIOTRACE_HOOKS default n help This will build a kernel module called mmiotrace. + Making this a built-in is heavily discouraged. Mmiotrace traces Memory Mapped I/O access and is meant for debugging and reverse engineering. The kernel module offers wrapped diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index 28411dadb8b3..e759f7c3878f 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -51,10 +51,6 @@ static LIST_HEAD(kmmio_probes); static struct kmmio_context kmmio_ctx[NR_CPUS]; -static struct pf_handler kmmio_pf_hook = { - .handler = kmmio_page_fault -}; - static struct notifier_block nb_die = { .notifier_call = kmmio_die_notifier }; @@ -77,7 +73,8 @@ void cleanup_kmmio(void) * kmmio_page_table, kmmio_probes */ if (handler_registered) { - unregister_page_fault_handler(&kmmio_pf_hook); + if (mmiotrace_unregister_pf(&kmmio_page_fault)) + BUG(); synchronize_rcu(); } unregister_die_notifier(&nb_die); @@ -343,8 +340,11 @@ int register_kmmio_probe(struct kmmio_probe *p) } if (!handler_registered) { - register_page_fault_handler(&kmmio_pf_hook); - handler_registered++; + if (mmiotrace_register_pf(&kmmio_page_fault)) + printk(KERN_ERR "mmiotrace: Cannot register page " + "fault handler.\n"); + else + handler_registered++; } out: diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 343f5c1aacc8..e9a086a1a9ff 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -49,53 +49,55 @@ #define PF_RSVD (1<<3) #define PF_INSTR (1<<4) -#ifdef CONFIG_PAGE_FAULT_HANDLERS -static HLIST_HEAD(pf_handlers); /* protected by RCU */ -static DEFINE_SPINLOCK(pf_handlers_writer); +#ifdef CONFIG_MMIOTRACE_HOOKS +static pf_handler_func mmiotrace_pf_handler; /* protected by RCU */ +static DEFINE_SPINLOCK(mmiotrace_handler_lock); -void register_page_fault_handler(struct pf_handler *new_pfh) +int mmiotrace_register_pf(pf_handler_func new_pfh) { + int ret = 0; unsigned long flags; - spin_lock_irqsave(&pf_handlers_writer, flags); - hlist_add_head_rcu(&new_pfh->hlist, &pf_handlers); - spin_unlock_irqrestore(&pf_handlers_writer, flags); + spin_lock_irqsave(&mmiotrace_handler_lock, flags); + if (mmiotrace_pf_handler) + ret = -EBUSY; + else + mmiotrace_pf_handler = new_pfh; + spin_unlock_irqrestore(&mmiotrace_handler_lock, flags); + return ret; } -EXPORT_SYMBOL_GPL(register_page_fault_handler); +EXPORT_SYMBOL_GPL(mmiotrace_register_pf); /** - * unregister_page_fault_handler: + * mmiotrace_unregister_pf: * The caller must ensure @old_pfh is not in use anymore before freeing it. - * This function does not guarantee it. The list of handlers is protected by - * RCU, so you can do this by e.g. calling synchronize_rcu(). + * This function does not guarantee it. The handler function pointer is + * protected by RCU, so you can do this by e.g. calling synchronize_rcu(). */ -void unregister_page_fault_handler(struct pf_handler *old_pfh) +int mmiotrace_unregister_pf(pf_handler_func old_pfh) { + int ret = 0; unsigned long flags; - spin_lock_irqsave(&pf_handlers_writer, flags); - hlist_del_rcu(&old_pfh->hlist); - spin_unlock_irqrestore(&pf_handlers_writer, flags); + spin_lock_irqsave(&mmiotrace_handler_lock, flags); + if (mmiotrace_pf_handler != old_pfh) + ret = -EPERM; + else + mmiotrace_pf_handler = NULL; + spin_unlock_irqrestore(&mmiotrace_handler_lock, flags); + return ret; } -EXPORT_SYMBOL_GPL(unregister_page_fault_handler); -#endif +EXPORT_SYMBOL_GPL(mmiotrace_unregister_pf); +#endif /* CONFIG_MMIOTRACE_HOOKS */ /* returns non-zero if do_page_fault() should return */ -static int handle_custom_pf(struct pt_regs *regs, unsigned long error_code, - unsigned long address) +static inline int call_mmiotrace(struct pt_regs *regs, + unsigned long error_code, + unsigned long address) { -#ifdef CONFIG_PAGE_FAULT_HANDLERS +#ifdef CONFIG_MMIOTRACE_HOOKS int ret = 0; - struct pf_handler *cur; - struct hlist_node *ncur; - - if (hlist_empty(&pf_handlers)) - return 0; - rcu_read_lock(); - hlist_for_each_entry_rcu(cur, ncur, &pf_handlers, hlist) { - ret = cur->handler(regs, error_code, address); - if (ret) - break; - } + if (mmiotrace_pf_handler) + ret = mmiotrace_pf_handler(regs, error_code, address); rcu_read_unlock(); return ret; #else @@ -655,7 +657,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) if (notify_page_fault(regs)) return; - if (handle_custom_pf(regs, error_code, address)) + if (call_mmiotrace(regs, error_code, address)) return; /* diff --git a/include/asm-x86/kdebug.h b/include/asm-x86/kdebug.h index a80f2d6cc737..7063281040da 100644 --- a/include/asm-x86/kdebug.h +++ b/include/asm-x86/kdebug.h @@ -35,13 +35,11 @@ extern void show_regs(struct pt_regs *regs); extern unsigned long oops_begin(void); extern void oops_end(unsigned long, struct pt_regs *, int signr); -struct pf_handler { - struct hlist_node hlist; - int (*handler)(struct pt_regs *regs, unsigned long error_code, - unsigned long address); -}; +typedef int (*pf_handler_func)(struct pt_regs *regs, + unsigned long error_code, + unsigned long address); -extern void register_page_fault_handler(struct pf_handler *new_pfh); -extern void unregister_page_fault_handler(struct pf_handler *old_pfh); +extern int mmiotrace_register_pf(pf_handler_func new_pfh); +extern int mmiotrace_unregister_pf(pf_handler_func old_pfh); #endif -- cgit v1.2.3 From f513638030ca384b0bace4df64f0b82f6ae1e4c6 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:57 +0200 Subject: x86 mmiotrace: Use percpu instead of arrays. Signed-off-by: Pekka Paalanen Cc: Eric Dumazet Cc: pq@iki.fi Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mmiotrace/kmmio.c | 27 ++++++------ arch/x86/kernel/mmiotrace/mmio-mod.c | 80 +++++++++++++++++++----------------- 2 files changed, 58 insertions(+), 49 deletions(-) diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index e759f7c3878f..5e239d0b8467 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -49,7 +50,8 @@ static unsigned int handler_registered; static struct list_head kmmio_page_table[KMMIO_PAGE_TABLE_SIZE]; static LIST_HEAD(kmmio_probes); -static struct kmmio_context kmmio_ctx[NR_CPUS]; +/* Accessed per-cpu */ +static DEFINE_PER_CPU(struct kmmio_context, kmmio_ctx); static struct notifier_block nb_die = { .notifier_call = kmmio_die_notifier @@ -173,8 +175,7 @@ static void disarm_kmmio_fault_page(unsigned long page, int *page_level) */ static int kmmio_handler(struct pt_regs *regs, unsigned long addr) { - struct kmmio_context *ctx; - int cpu; + struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); /* * Preemption is now disabled to prevent process switch during @@ -187,8 +188,6 @@ static int kmmio_handler(struct pt_regs *regs, unsigned long addr) * And that interrupt triggers a kmmio trap? */ preempt_disable(); - cpu = smp_processor_id(); - ctx = &kmmio_ctx[cpu]; /* interrupts disabled and CPU-local data => atomicity guaranteed. */ if (ctx->active) { @@ -199,7 +198,7 @@ static int kmmio_handler(struct pt_regs *regs, unsigned long addr) */ printk(KERN_EMERG "mmiotrace: recursive probe hit on CPU %d, " "for address %lu. Ignoring.\n", - cpu, addr); + smp_processor_id(), addr); goto no_kmmio; } ctx->active++; @@ -231,6 +230,7 @@ static int kmmio_handler(struct pt_regs *regs, unsigned long addr) /* We hold lock, now we set present bit in PTE and single step. */ disarm_kmmio_fault_page(ctx->fpage->page, NULL); + put_cpu_var(kmmio_ctx); return 1; no_kmmio_locked: @@ -238,6 +238,7 @@ no_kmmio_locked: ctx->active--; no_kmmio: preempt_enable_no_resched(); + put_cpu_var(kmmio_ctx); /* page fault not handled by kmmio */ return 0; } @@ -249,11 +250,11 @@ no_kmmio: */ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) { - int cpu = smp_processor_id(); - struct kmmio_context *ctx = &kmmio_ctx[cpu]; + int ret = 0; + struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); if (!ctx->active) - return 0; + goto out; if (ctx->probe && ctx->probe->post_handler) ctx->probe->post_handler(ctx->probe, condition, regs); @@ -273,10 +274,12 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) * will have TF set, in which case, continue the remaining processing * of do_debug, as if this is not a probe hit. */ - if (regs->flags & TF_MASK) - return 0; + if (!(regs->flags & TF_MASK)) + ret = 1; - return 1; +out: + put_cpu_var(kmmio_ctx); + return ret; } static int add_kmmio_fault_page(unsigned long page) diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index 0019dcdf6158..f9c609266d83 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -30,6 +30,7 @@ #include #include /* for ISA_START_ADDRESS */ #include +#include #include "kmmio.h" #include "pf_in.h" @@ -49,11 +50,11 @@ struct trap_reason { }; /* Accessed per-cpu. */ -static struct trap_reason pf_reason[NR_CPUS]; -static struct mm_io_header_rw cpu_trace[NR_CPUS]; +static DEFINE_PER_CPU(struct trap_reason, pf_reason); +static DEFINE_PER_CPU(struct mm_io_header_rw, cpu_trace); /* Access to this is not per-cpu. */ -static atomic_t dropped[NR_CPUS]; +static DEFINE_PER_CPU(atomic_t, dropped); static struct file_operations mmio_fops = { .owner = THIS_MODULE, @@ -150,15 +151,15 @@ static void print_pte(unsigned long address) */ static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) { - const unsigned long cpu = smp_processor_id(); + const struct trap_reason *my_reason = &get_cpu_var(pf_reason); printk(KERN_EMERG MODULE_NAME ": unexpected fault for address: %lx, " "last fault for address: %lx\n", - addr, pf_reason[cpu].addr); + addr, my_reason->addr); print_pte(addr); #ifdef __i386__ print_symbol(KERN_EMERG "faulting EIP is at %s\n", regs->ip); print_symbol(KERN_EMERG "last faulting EIP was at %s\n", - pf_reason[cpu].ip); + my_reason->ip); printk(KERN_EMERG "eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", regs->ax, regs->bx, regs->cx, regs->dx); @@ -168,100 +169,105 @@ static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) #else print_symbol(KERN_EMERG "faulting RIP is at %s\n", regs->ip); print_symbol(KERN_EMERG "last faulting RIP was at %s\n", - pf_reason[cpu].ip); + my_reason->ip); printk(KERN_EMERG "rax: %016lx rcx: %016lx rdx: %016lx\n", regs->ax, regs->cx, regs->dx); printk(KERN_EMERG "rsi: %016lx rdi: %016lx " "rbp: %016lx rsp: %016lx\n", regs->si, regs->di, regs->bp, regs->sp); #endif + put_cpu_var(pf_reason); BUG(); } static void pre(struct kmmio_probe *p, struct pt_regs *regs, unsigned long addr) { - const unsigned long cpu = smp_processor_id(); + struct trap_reason *my_reason = &get_cpu_var(pf_reason); + struct mm_io_header_rw *my_trace = &get_cpu_var(cpu_trace); const unsigned long instptr = instruction_pointer(regs); const enum reason_type type = get_ins_type(instptr); /* it doesn't make sense to have more than one active trace per cpu */ - if (pf_reason[cpu].active_traces) + if (my_reason->active_traces) die_kmmio_nesting_error(regs, addr); else - pf_reason[cpu].active_traces++; + my_reason->active_traces++; - pf_reason[cpu].type = type; - pf_reason[cpu].addr = addr; - pf_reason[cpu].ip = instptr; + my_reason->type = type; + my_reason->addr = addr; + my_reason->ip = instptr; - cpu_trace[cpu].header.type = MMIO_MAGIC; - cpu_trace[cpu].header.pid = 0; - cpu_trace[cpu].header.data_len = sizeof(struct mm_io_rw); - cpu_trace[cpu].rw.address = addr; + my_trace->header.type = MMIO_MAGIC; + my_trace->header.pid = 0; + my_trace->header.data_len = sizeof(struct mm_io_rw); + my_trace->rw.address = addr; /* * Only record the program counter when requested. * It may taint clean-room reverse engineering. */ if (trace_pc) - cpu_trace[cpu].rw.pc = instptr; + my_trace->rw.pc = instptr; else - cpu_trace[cpu].rw.pc = 0; + my_trace->rw.pc = 0; - record_timestamp(&cpu_trace[cpu].header); + record_timestamp(&my_trace->header); switch (type) { case REG_READ: - cpu_trace[cpu].header.type |= + my_trace->header.type |= (MMIO_READ << MMIO_OPCODE_SHIFT) | (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); break; case REG_WRITE: - cpu_trace[cpu].header.type |= + my_trace->header.type |= (MMIO_WRITE << MMIO_OPCODE_SHIFT) | (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); - cpu_trace[cpu].rw.value = get_ins_reg_val(instptr, regs); + my_trace->rw.value = get_ins_reg_val(instptr, regs); break; case IMM_WRITE: - cpu_trace[cpu].header.type |= + my_trace->header.type |= (MMIO_WRITE << MMIO_OPCODE_SHIFT) | (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); - cpu_trace[cpu].rw.value = get_ins_imm_val(instptr); + my_trace->rw.value = get_ins_imm_val(instptr); break; default: { unsigned char *ip = (unsigned char *)instptr; - cpu_trace[cpu].header.type |= + my_trace->header.type |= (MMIO_UNKNOWN_OP << MMIO_OPCODE_SHIFT); - cpu_trace[cpu].rw.value = (*ip) << 16 | - *(ip + 1) << 8 | - *(ip + 2); + my_trace->rw.value = (*ip) << 16 | *(ip + 1) << 8 | + *(ip + 2); } } + put_cpu_var(cpu_trace); + put_cpu_var(pf_reason); } static void post(struct kmmio_probe *p, unsigned long condition, struct pt_regs *regs) { - const unsigned long cpu = smp_processor_id(); + struct trap_reason *my_reason = &get_cpu_var(pf_reason); + struct mm_io_header_rw *my_trace = &get_cpu_var(cpu_trace); /* this should always return the active_trace count to 0 */ - pf_reason[cpu].active_traces--; - if (pf_reason[cpu].active_traces) { + my_reason->active_traces--; + if (my_reason->active_traces) { printk(KERN_EMERG MODULE_NAME ": unexpected post handler"); BUG(); } - switch (pf_reason[cpu].type) { + switch (my_reason->type) { case REG_READ: - cpu_trace[cpu].rw.value = get_ins_reg_val(pf_reason[cpu].ip, - regs); + my_trace->rw.value = get_ins_reg_val(my_reason->ip, regs); break; default: break; } - relay_write(chan, &cpu_trace[cpu], sizeof(struct mm_io_header_rw)); + relay_write(chan, my_trace, sizeof(*my_trace)); + put_cpu_var(cpu_trace); + put_cpu_var(pf_reason); } /* @@ -274,7 +280,7 @@ static int subbuf_start_handler(struct rchan_buf *buf, void *subbuf, void *prev_subbuf, size_t prev_padding) { unsigned int cpu = buf->cpu; - atomic_t *drop = &dropped[cpu]; + atomic_t *drop = &per_cpu(dropped, cpu); int count; if (relay_buf_full(buf)) { if (atomic_inc_return(drop) == 1) { -- cgit v1.2.3 From 0fd0e3da4557c479b820b9a4a7afa25b4637ddf2 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:57 +0200 Subject: x86: mmiotrace full patch, preview 1 kmmio.c handles the list of mmio probes with callbacks, list of traced pages, and attaching into the page fault handler and die notifier. It arms, traps and disarms the given pages, this is the core of mmiotrace. mmio-mod.c is a user interface, hooking into ioremap functions and registering the mmio probes. It also decodes the required information from trapped mmio accesses via the pre and post callbacks in each probe. Currently, hooking into ioremap functions works by redefining the symbols of the target (binary) kernel module, so that it calls the traced versions of the functions. The most notable changes done since the last discussion are: - kmmio.c is a built-in, not part of the module - direct call from fault.c to kmmio.c, removing all dynamic hooks - prepare for unregistering probes at any time - make kmmio re-initializable and accessible to more than one user - rewrite kmmio locking to remove all spinlocks from page fault path Can I abuse call_rcu() like I do in kmmio.c:unregister_kmmio_probe() or is there a better way? The function called via call_rcu() itself calls call_rcu() again, will this work or break? There I need a second grace period for RCU after the first grace period for page faults. Mmiotrace itself (mmio-mod.c) is still a module, I am going to attack that next. At some point I will start looking into how to make mmiotrace a tracer component of ftrace (thanks for the hint, Ingo). Ftrace should make the user space part of mmiotracing as simple as 'cat /debug/trace/mmio > dump.txt'. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/init_task.c | 1 - arch/x86/kernel/mmiotrace/Makefile | 8 +- arch/x86/kernel/mmiotrace/kmmio.c | 349 ++++++++++++++++++++---------- arch/x86/kernel/mmiotrace/kmmio.h | 58 ----- arch/x86/kernel/mmiotrace/mmio-mod.c | 81 ++++--- arch/x86/kernel/mmiotrace/pf_in.c | 2 +- arch/x86/kernel/mmiotrace/testmmiotrace.c | 13 +- arch/x86/mm/fault.c | 59 +---- include/asm-x86/kdebug.h | 7 - include/linux/mmiotrace.h | 38 ++++ 10 files changed, 335 insertions(+), 281 deletions(-) delete mode 100644 arch/x86/kernel/mmiotrace/kmmio.h diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c index 027a5b6a12b2..a4f93b4120c1 100644 --- a/arch/x86/kernel/init_task.c +++ b/arch/x86/kernel/init_task.c @@ -15,7 +15,6 @@ static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); struct mm_struct init_mm = INIT_MM(init_mm); EXPORT_UNUSED_SYMBOL(init_mm); /* will be removed in 2.6.26 */ -EXPORT_SYMBOL_GPL(init_mm); /* * Initial thread structure. diff --git a/arch/x86/kernel/mmiotrace/Makefile b/arch/x86/kernel/mmiotrace/Makefile index d6905f7f981b..cf1e747b463e 100644 --- a/arch/x86/kernel/mmiotrace/Makefile +++ b/arch/x86/kernel/mmiotrace/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_MMIOTRACE) += mmiotrace.o -mmiotrace-objs := pf_in.o kmmio.o mmio-mod.o - -obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o +obj-$(CONFIG_MMIOTRACE_HOOKS) += kmmio.o +obj-$(CONFIG_MMIOTRACE) += mmiotrace.o +mmiotrace-objs := pf_in.o mmio-mod.o +obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index 5e239d0b8467..539a9b19588f 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -6,6 +6,7 @@ */ #include +#include #include #include #include @@ -17,70 +18,119 @@ #include #include #include +#include #include #include #include #include #include -#include "kmmio.h" +#include -#define KMMIO_HASH_BITS 6 -#define KMMIO_TABLE_SIZE (1 << KMMIO_HASH_BITS) #define KMMIO_PAGE_HASH_BITS 4 #define KMMIO_PAGE_TABLE_SIZE (1 << KMMIO_PAGE_HASH_BITS) +struct kmmio_fault_page { + struct list_head list; + struct kmmio_fault_page *release_next; + unsigned long page; /* location of the fault page */ + + /* + * Number of times this page has been registered as a part + * of a probe. If zero, page is disarmed and this may be freed. + * Used only by writers (RCU). + */ + int count; +}; + +struct kmmio_delayed_release { + struct rcu_head rcu; + struct kmmio_fault_page *release_list; +}; + struct kmmio_context { struct kmmio_fault_page *fpage; struct kmmio_probe *probe; unsigned long saved_flags; + unsigned long addr; int active; }; -static int kmmio_page_fault(struct pt_regs *regs, unsigned long error_code, - unsigned long address); static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args); +static DECLARE_MUTEX(kmmio_init_mutex); static DEFINE_SPINLOCK(kmmio_lock); /* These are protected by kmmio_lock */ +static int kmmio_initialized; unsigned int kmmio_count; -static unsigned int handler_registered; + +/* Read-protected by RCU, write-protected by kmmio_lock. */ static struct list_head kmmio_page_table[KMMIO_PAGE_TABLE_SIZE]; static LIST_HEAD(kmmio_probes); +static struct list_head *kmmio_page_list(unsigned long page) +{ + return &kmmio_page_table[hash_long(page, KMMIO_PAGE_HASH_BITS)]; +} + /* Accessed per-cpu */ static DEFINE_PER_CPU(struct kmmio_context, kmmio_ctx); +/* protected by kmmio_init_mutex */ static struct notifier_block nb_die = { .notifier_call = kmmio_die_notifier }; -int init_kmmio(void) +/** + * Makes sure kmmio is initialized and usable. + * This must be called before any other kmmio function defined here. + * May sleep. + */ +void reference_kmmio(void) { - int i; - for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) - INIT_LIST_HEAD(&kmmio_page_table[i]); - - register_die_notifier(&nb_die); - return 0; + down(&kmmio_init_mutex); + spin_lock_irq(&kmmio_lock); + if (!kmmio_initialized) { + int i; + for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) + INIT_LIST_HEAD(&kmmio_page_table[i]); + if (register_die_notifier(&nb_die)) + BUG(); + } + kmmio_initialized++; + spin_unlock_irq(&kmmio_lock); + up(&kmmio_init_mutex); } +EXPORT_SYMBOL_GPL(reference_kmmio); -void cleanup_kmmio(void) +/** + * Clean up kmmio after use. This must be called for every call to + * reference_kmmio(). All probes registered after the corresponding + * reference_kmmio() must have been unregistered when calling this. + * May sleep. + */ +void unreference_kmmio(void) { - /* - * Assume the following have been already cleaned by calling - * unregister_kmmio_probe() appropriately: - * kmmio_page_table, kmmio_probes - */ - if (handler_registered) { - if (mmiotrace_unregister_pf(&kmmio_page_fault)) - BUG(); - synchronize_rcu(); + bool unreg = false; + + down(&kmmio_init_mutex); + spin_lock_irq(&kmmio_lock); + + if (kmmio_initialized == 1) { + BUG_ON(is_kmmio_active()); + unreg = true; } - unregister_die_notifier(&nb_die); + kmmio_initialized--; + BUG_ON(kmmio_initialized < 0); + spin_unlock_irq(&kmmio_lock); + + if (unreg) + unregister_die_notifier(&nb_die); /* calls sync_rcu() */ + up(&kmmio_init_mutex); } +EXPORT_SYMBOL(unreference_kmmio); /* * this is basically a dynamic stabbing problem: @@ -90,33 +140,33 @@ void cleanup_kmmio(void) * Overlap a Point (might be simple) * Space Efficient Dynamic Stabbing with Fast Queries - Mikkel Thorup */ -/* Get the kmmio at this addr (if any). You must be holding kmmio_lock. */ +/* Get the kmmio at this addr (if any). You must be holding RCU read lock. */ static struct kmmio_probe *get_kmmio_probe(unsigned long addr) { struct kmmio_probe *p; - list_for_each_entry(p, &kmmio_probes, list) { + list_for_each_entry_rcu(p, &kmmio_probes, list) { if (addr >= p->addr && addr <= (p->addr + p->len)) return p; } return NULL; } +/* You must be holding RCU read lock. */ static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) { - struct list_head *head, *tmp; + struct list_head *head; + struct kmmio_fault_page *p; page &= PAGE_MASK; - head = &kmmio_page_table[hash_long(page, KMMIO_PAGE_HASH_BITS)]; - list_for_each(tmp, head) { - struct kmmio_fault_page *p - = list_entry(tmp, struct kmmio_fault_page, list); + head = kmmio_page_list(page); + list_for_each_entry_rcu(p, head, list) { if (p->page == page) return p; } - return NULL; } +/** Mark the given page as not present. Access to it will trigger a fault. */ static void arm_kmmio_fault_page(unsigned long page, int *page_level) { unsigned long address = page & PAGE_MASK; @@ -124,8 +174,8 @@ static void arm_kmmio_fault_page(unsigned long page, int *page_level) pte_t *pte = lookup_address(address, &level); if (!pte) { - printk(KERN_ERR "Error in %s: no pte for page 0x%08lx\n", - __FUNCTION__, page); + pr_err("kmmio: Error in %s: no pte for page 0x%08lx\n", + __func__, page); return; } @@ -143,6 +193,7 @@ static void arm_kmmio_fault_page(unsigned long page, int *page_level) __flush_tlb_one(page); } +/** Mark the given page as present. */ static void disarm_kmmio_fault_page(unsigned long page, int *page_level) { unsigned long address = page & PAGE_MASK; @@ -150,8 +201,8 @@ static void disarm_kmmio_fault_page(unsigned long page, int *page_level) pte_t *pte = lookup_address(address, &level); if (!pte) { - printk(KERN_ERR "Error in %s: no pte for page 0x%08lx\n", - __FUNCTION__, page); + pr_err("kmmio: Error in %s: no pte for page 0x%08lx\n", + __func__, page); return; } @@ -169,13 +220,25 @@ static void disarm_kmmio_fault_page(unsigned long page, int *page_level) __flush_tlb_one(page); } +/* + * This is being called from do_page_fault(). + * + * We may be in an interrupt or a critical section. Also prefecthing may + * trigger a page fault. We may be in the middle of process switch. + * We cannot take any locks, because we could be executing especially + * within a kmmio critical section. + * + * Local interrupts are disabled, so preemption cannot happen. + * Do not enable interrupts, do not sleep, and watch out for other CPUs. + */ /* * Interrupts are disabled on entry as trap3 is an interrupt gate * and they remain disabled thorough out this function. */ -static int kmmio_handler(struct pt_regs *regs, unsigned long addr) +int kmmio_handler(struct pt_regs *regs, unsigned long addr) { - struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); + struct kmmio_context *ctx; + struct kmmio_fault_page *faultpage; /* * Preemption is now disabled to prevent process switch during @@ -186,40 +249,40 @@ static int kmmio_handler(struct pt_regs *regs, unsigned long addr) * XXX what if an interrupt occurs between returning from * do_page_fault() and entering the single-step exception handler? * And that interrupt triggers a kmmio trap? + * XXX If we tracing an interrupt service routine or whatever, is + * this enough to keep it on the current cpu? */ preempt_disable(); - /* interrupts disabled and CPU-local data => atomicity guaranteed. */ + rcu_read_lock(); + faultpage = get_kmmio_fault_page(addr); + if (!faultpage) { + /* + * Either this page fault is not caused by kmmio, or + * another CPU just pulled the kmmio probe from under + * our feet. In the latter case all hell breaks loose. + */ + goto no_kmmio; + } + + ctx = &get_cpu_var(kmmio_ctx); if (ctx->active) { /* - * This avoids a deadlock with kmmio_lock. + * Prevent overwriting already in-flight context. * If this page fault really was due to kmmio trap, * all hell breaks loose. */ - printk(KERN_EMERG "mmiotrace: recursive probe hit on CPU %d, " - "for address %lu. Ignoring.\n", + pr_emerg("kmmio: recursive probe hit on CPU %d, " + "for address 0x%08lx. Ignoring.\n", smp_processor_id(), addr); - goto no_kmmio; + goto no_kmmio_ctx; } ctx->active++; - /* - * Acquire the kmmio lock to prevent changes affecting - * get_kmmio_fault_page() and get_kmmio_probe(), since we save their - * returned pointers. - * The lock is released in post_kmmio_handler(). - * XXX: could/should get_kmmio_*() be using RCU instead of spinlock? - */ - spin_lock(&kmmio_lock); - - ctx->fpage = get_kmmio_fault_page(addr); - if (!ctx->fpage) { - /* this page fault is not caused by kmmio */ - goto no_kmmio_locked; - } - + ctx->fpage = faultpage; ctx->probe = get_kmmio_probe(addr); ctx->saved_flags = (regs->flags & (TF_MASK|IF_MASK)); + ctx->addr = addr; if (ctx->probe && ctx->probe->pre_handler) ctx->probe->pre_handler(ctx->probe, regs, addr); @@ -227,46 +290,62 @@ static int kmmio_handler(struct pt_regs *regs, unsigned long addr) regs->flags |= TF_MASK; regs->flags &= ~IF_MASK; - /* We hold lock, now we set present bit in PTE and single step. */ + /* Now we set present bit in PTE and single step. */ disarm_kmmio_fault_page(ctx->fpage->page, NULL); put_cpu_var(kmmio_ctx); + rcu_read_unlock(); return 1; -no_kmmio_locked: - spin_unlock(&kmmio_lock); - ctx->active--; +no_kmmio_ctx: + put_cpu_var(kmmio_ctx); no_kmmio: + rcu_read_unlock(); preempt_enable_no_resched(); - put_cpu_var(kmmio_ctx); - /* page fault not handled by kmmio */ - return 0; + return 0; /* page fault not handled by kmmio */ } /* * Interrupts are disabled on entry as trap1 is an interrupt gate * and they remain disabled thorough out this function. - * And we hold kmmio lock. + * This must always get called as the pair to kmmio_handler(). */ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) { int ret = 0; + struct kmmio_probe *probe; + struct kmmio_fault_page *faultpage; struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); if (!ctx->active) goto out; + rcu_read_lock(); + + faultpage = get_kmmio_fault_page(ctx->addr); + probe = get_kmmio_probe(ctx->addr); + if (faultpage != ctx->fpage || probe != ctx->probe) { + /* + * The trace setup changed after kmmio_handler() and before + * running this respective post handler. User does not want + * the result anymore. + */ + ctx->probe = NULL; + ctx->fpage = NULL; + } + if (ctx->probe && ctx->probe->post_handler) ctx->probe->post_handler(ctx->probe, condition, regs); - arm_kmmio_fault_page(ctx->fpage->page, NULL); + if (ctx->fpage) + arm_kmmio_fault_page(ctx->fpage->page, NULL); regs->flags &= ~TF_MASK; regs->flags |= ctx->saved_flags; /* These were acquired in kmmio_handler(). */ ctx->active--; - spin_unlock(&kmmio_lock); + BUG_ON(ctx->active); preempt_enable_no_resched(); /* @@ -277,11 +356,13 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) if (!(regs->flags & TF_MASK)) ret = 1; + rcu_read_unlock(); out: put_cpu_var(kmmio_ctx); return ret; } +/* You must be holding kmmio_lock. */ static int add_kmmio_fault_page(unsigned long page) { struct kmmio_fault_page *f; @@ -289,6 +370,8 @@ static int add_kmmio_fault_page(unsigned long page) page &= PAGE_MASK; f = get_kmmio_fault_page(page); if (f) { + if (!f->count) + arm_kmmio_fault_page(f->page, NULL); f->count++; return 0; } @@ -299,15 +382,16 @@ static int add_kmmio_fault_page(unsigned long page) f->count = 1; f->page = page; - list_add(&f->list, - &kmmio_page_table[hash_long(f->page, KMMIO_PAGE_HASH_BITS)]); + list_add_rcu(&f->list, kmmio_page_list(f->page)); arm_kmmio_fault_page(f->page, NULL); return 0; } -static void release_kmmio_fault_page(unsigned long page) +/* You must be holding kmmio_lock. */ +static void release_kmmio_fault_page(unsigned long page, + struct kmmio_fault_page **release_list) { struct kmmio_fault_page *f; @@ -317,9 +401,11 @@ static void release_kmmio_fault_page(unsigned long page) return; f->count--; + BUG_ON(f->count < 0); if (!f->count) { disarm_kmmio_fault_page(f->page, NULL); - list_del(&f->list); + f->release_next = *release_list; + *release_list = f; } } @@ -334,68 +420,113 @@ int register_kmmio_probe(struct kmmio_probe *p) ret = -EEXIST; goto out; } - list_add(&p->list, &kmmio_probes); - /*printk("adding fault pages...\n");*/ + list_add_rcu(&p->list, &kmmio_probes); while (size < p->len) { if (add_kmmio_fault_page(p->addr + size)) - printk(KERN_ERR "mmio: Unable to set page fault.\n"); + pr_err("kmmio: Unable to set page fault.\n"); size += PAGE_SIZE; } - - if (!handler_registered) { - if (mmiotrace_register_pf(&kmmio_page_fault)) - printk(KERN_ERR "mmiotrace: Cannot register page " - "fault handler.\n"); - else - handler_registered++; - } - out: spin_unlock_irq(&kmmio_lock); /* * XXX: What should I do here? * Here was a call to global_flush_tlb(), but it does not exist - * anymore. + * anymore. It seems it's not needed after all. */ return ret; } +EXPORT_SYMBOL(register_kmmio_probe); +static void rcu_free_kmmio_fault_pages(struct rcu_head *head) +{ + struct kmmio_delayed_release *dr = container_of( + head, + struct kmmio_delayed_release, + rcu); + struct kmmio_fault_page *p = dr->release_list; + while (p) { + struct kmmio_fault_page *next = p->release_next; + BUG_ON(p->count); + kfree(p); + p = next; + } + kfree(dr); +} + +static void remove_kmmio_fault_pages(struct rcu_head *head) +{ + struct kmmio_delayed_release *dr = container_of( + head, + struct kmmio_delayed_release, + rcu); + struct kmmio_fault_page *p = dr->release_list; + struct kmmio_fault_page **prevp = &dr->release_list; + unsigned long flags; + spin_lock_irqsave(&kmmio_lock, flags); + while (p) { + if (!p->count) + list_del_rcu(&p->list); + else + *prevp = p->release_next; + prevp = &p->release_next; + p = p->release_next; + } + spin_unlock_irqrestore(&kmmio_lock, flags); + /* This is the real RCU destroy call. */ + call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages); +} + +/* + * Remove a kmmio probe. You have to synchronize_rcu() before you can be + * sure that the callbacks will not be called anymore. + * + * Unregistering a kmmio fault page has three steps: + * 1. release_kmmio_fault_page() + * Disarm the page, wait a grace period to let all faults finish. + * 2. remove_kmmio_fault_pages() + * Remove the pages from kmmio_page_table. + * 3. rcu_free_kmmio_fault_pages() + * Actally free the kmmio_fault_page structs as with RCU. + */ void unregister_kmmio_probe(struct kmmio_probe *p) { unsigned long size = 0; + struct kmmio_fault_page *release_list = NULL; + struct kmmio_delayed_release *drelease; spin_lock_irq(&kmmio_lock); while (size < p->len) { - release_kmmio_fault_page(p->addr + size); + release_kmmio_fault_page(p->addr + size, &release_list); size += PAGE_SIZE; } - list_del(&p->list); + list_del_rcu(&p->list); kmmio_count--; spin_unlock_irq(&kmmio_lock); -} -/* - * According to 2.6.20, mainly x86_64 arch: - * This is being called from do_page_fault(), via the page fault notifier - * chain. The chain is called for both user space faults and kernel space - * faults (address >= TASK_SIZE64), except not on faults serviced by - * vmalloc_fault(). - * - * We may be in an interrupt or a critical section. Also prefecthing may - * trigger a page fault. We may be in the middle of process switch. - * The page fault hook functionality has put us inside RCU read lock. - * - * Local interrupts are disabled, so preemption cannot happen. - * Do not enable interrupts, do not sleep, and watch out for other CPUs. - */ -static int kmmio_page_fault(struct pt_regs *regs, unsigned long error_code, - unsigned long address) -{ - if (is_kmmio_active()) - if (kmmio_handler(regs, address) == 1) - return -1; - return 0; + drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC); + if (!drelease) { + pr_crit("kmmio: leaking kmmio_fault_page objects.\n"); + return; + } + drelease->release_list = release_list; + + /* + * This is not really RCU here. We have just disarmed a set of + * pages so that they cannot trigger page faults anymore. However, + * we cannot remove the pages from kmmio_page_table, + * because a probe hit might be in flight on another CPU. The + * pages are collected into a list, and they will be removed from + * kmmio_page_table when it is certain that no probe hit related to + * these pages can be in flight. RCU grace period sounds like a + * good choice. + * + * If we removed the pages too early, kmmio page fault handler might + * not find the respective kmmio_fault_page and determine it's not + * a kmmio fault, when it actually is. This would lead to madness. + */ + call_rcu(&drelease->rcu, remove_kmmio_fault_pages); } +EXPORT_SYMBOL(unregister_kmmio_probe); static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args) diff --git a/arch/x86/kernel/mmiotrace/kmmio.h b/arch/x86/kernel/mmiotrace/kmmio.h deleted file mode 100644 index 85b7f68a3b8a..000000000000 --- a/arch/x86/kernel/mmiotrace/kmmio.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _LINUX_KMMIO_H -#define _LINUX_KMMIO_H - -#include -#include -#include -#include -#include -#include -#include - -struct kmmio_probe; -struct kmmio_fault_page; -struct pt_regs; - -typedef void (*kmmio_pre_handler_t)(struct kmmio_probe *, - struct pt_regs *, unsigned long addr); -typedef void (*kmmio_post_handler_t)(struct kmmio_probe *, - unsigned long condition, struct pt_regs *); - -struct kmmio_probe { - struct list_head list; - - /* start location of the probe point */ - unsigned long addr; - - /* length of the probe region */ - unsigned long len; - - /* Called before addr is executed. */ - kmmio_pre_handler_t pre_handler; - - /* Called after addr is executed, unless... */ - kmmio_post_handler_t post_handler; -}; - -struct kmmio_fault_page { - struct list_head list; - - /* location of the fault page */ - unsigned long page; - - int count; -}; - -/* kmmio is active by some kmmio_probes? */ -static inline int is_kmmio_active(void) -{ - extern unsigned int kmmio_count; - return kmmio_count; -} - -int init_kmmio(void); -void cleanup_kmmio(void); -int register_kmmio_probe(struct kmmio_probe *p); -void unregister_kmmio_probe(struct kmmio_probe *p); - -#endif /* _LINUX_KMMIO_H */ diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index f9c609266d83..e1a508588f03 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -32,7 +32,6 @@ #include #include -#include "kmmio.h" #include "pf_in.h" /* This app's relay channel files will appear in /debug/mmio-trace */ @@ -129,18 +128,17 @@ static void print_pte(unsigned long address) pte_t *pte = lookup_address(address, &level); if (!pte) { - printk(KERN_ERR "Error in %s: no pte for page 0x%08lx\n", - __FUNCTION__, address); + pr_err(MODULE_NAME ": Error in %s: no pte for page 0x%08lx\n", + __func__, address); return; } if (level == PG_LEVEL_2M) { - printk(KERN_EMERG MODULE_NAME ": 4MB pages are not " - "currently supported: %lx\n", - address); + pr_emerg(MODULE_NAME ": 4MB pages are not currently " + "supported: %lx\n", address); BUG(); } - printk(KERN_DEBUG MODULE_NAME ": pte for 0x%lx: 0x%lx 0x%lx\n", + pr_info(MODULE_NAME ": pte for 0x%lx: 0x%lx 0x%lx\n", address, pte_val(*pte), pte_val(*pte) & _PAGE_PRESENT); } @@ -152,7 +150,7 @@ static void print_pte(unsigned long address) static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) { const struct trap_reason *my_reason = &get_cpu_var(pf_reason); - printk(KERN_EMERG MODULE_NAME ": unexpected fault for address: %lx, " + pr_emerg(MODULE_NAME ": unexpected fault for address: %lx, " "last fault for address: %lx\n", addr, my_reason->addr); print_pte(addr); @@ -160,20 +158,17 @@ static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) print_symbol(KERN_EMERG "faulting EIP is at %s\n", regs->ip); print_symbol(KERN_EMERG "last faulting EIP was at %s\n", my_reason->ip); - printk(KERN_EMERG - "eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", + pr_emerg("eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", regs->ax, regs->bx, regs->cx, regs->dx); - printk(KERN_EMERG - "esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", + pr_emerg("esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", regs->si, regs->di, regs->bp, regs->sp); #else print_symbol(KERN_EMERG "faulting RIP is at %s\n", regs->ip); print_symbol(KERN_EMERG "last faulting RIP was at %s\n", my_reason->ip); - printk(KERN_EMERG "rax: %016lx rcx: %016lx rdx: %016lx\n", + pr_emerg("rax: %016lx rcx: %016lx rdx: %016lx\n", regs->ax, regs->cx, regs->dx); - printk(KERN_EMERG "rsi: %016lx rdi: %016lx " - "rbp: %016lx rsp: %016lx\n", + pr_emerg("rsi: %016lx rdi: %016lx rbp: %016lx rsp: %016lx\n", regs->si, regs->di, regs->bp, regs->sp); #endif put_cpu_var(pf_reason); @@ -251,10 +246,15 @@ static void post(struct kmmio_probe *p, unsigned long condition, struct trap_reason *my_reason = &get_cpu_var(pf_reason); struct mm_io_header_rw *my_trace = &get_cpu_var(cpu_trace); + /* + * XXX: This might not get called, if the probe is removed while + * trace hit is on flight. + */ + /* this should always return the active_trace count to 0 */ my_reason->active_traces--; if (my_reason->active_traces) { - printk(KERN_EMERG MODULE_NAME ": unexpected post handler"); + pr_emerg(MODULE_NAME ": unexpected post handler"); BUG(); } @@ -283,16 +283,15 @@ static int subbuf_start_handler(struct rchan_buf *buf, void *subbuf, atomic_t *drop = &per_cpu(dropped, cpu); int count; if (relay_buf_full(buf)) { - if (atomic_inc_return(drop) == 1) { - printk(KERN_ERR MODULE_NAME ": cpu %d buffer full!\n", - cpu); - } + if (atomic_inc_return(drop) == 1) + pr_err(MODULE_NAME ": cpu %d buffer full!\n", cpu); return 0; - } else if ((count = atomic_read(drop))) { - printk(KERN_ERR MODULE_NAME - ": cpu %d buffer no longer full, " - "missed %d events.\n", - cpu, count); + } + count = atomic_read(drop); + if (count) { + pr_err(MODULE_NAME ": cpu %d buffer no longer full, " + "missed %d events.\n", + cpu, count); atomic_sub(count, drop); } @@ -407,8 +406,8 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, /* Don't trace the low PCI/ISA area, it's always mapped.. */ if (!ISA_trace && (offset < ISA_END_ADDRESS) && (offset + size > ISA_START_ADDRESS)) { - printk(KERN_NOTICE MODULE_NAME ": Ignoring map of low " - "PCI/ISA area (0x%lx-0x%lx)\n", + pr_notice(MODULE_NAME ": Ignoring map of low PCI/ISA area " + "(0x%lx-0x%lx)\n", offset, offset + size); return; } @@ -418,7 +417,7 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, void __iomem *ioremap_cache_trace(unsigned long offset, unsigned long size) { void __iomem *p = ioremap_cache(offset, size); - printk(KERN_DEBUG MODULE_NAME ": ioremap_cache(0x%lx, 0x%lx) = %p\n", + pr_debug(MODULE_NAME ": ioremap_cache(0x%lx, 0x%lx) = %p\n", offset, size, p); ioremap_trace_core(offset, size, p); return p; @@ -428,7 +427,7 @@ EXPORT_SYMBOL(ioremap_cache_trace); void __iomem *ioremap_nocache_trace(unsigned long offset, unsigned long size) { void __iomem *p = ioremap_nocache(offset, size); - printk(KERN_DEBUG MODULE_NAME ": ioremap_nocache(0x%lx, 0x%lx) = %p\n", + pr_debug(MODULE_NAME ": ioremap_nocache(0x%lx, 0x%lx) = %p\n", offset, size, p); ioremap_trace_core(offset, size, p); return p; @@ -455,7 +454,7 @@ void iounmap_trace(volatile void __iomem *addr) }; struct remap_trace *trace; struct remap_trace *tmp; - printk(KERN_DEBUG MODULE_NAME ": Unmapping %p.\n", addr); + pr_debug(MODULE_NAME ": Unmapping %p.\n", addr); record_timestamp(&event.header); spin_lock(&trace_list_lock); @@ -481,7 +480,7 @@ static void clear_trace_list(void) spin_lock(&trace_list_lock); list_for_each_entry_safe(trace, tmp, &trace_list, list) { - printk(KERN_WARNING MODULE_NAME ": purging non-iounmapped " + pr_warning(MODULE_NAME ": purging non-iounmapped " "trace @0x%08lx, size 0x%lx.\n", trace->probe.addr, trace->probe.len); if (!nommiotrace) @@ -500,39 +499,37 @@ static int __init init(void) dir = debugfs_create_dir(APP_DIR, NULL); if (!dir) { - printk(KERN_ERR MODULE_NAME - ": Couldn't create relay app directory.\n"); + pr_err(MODULE_NAME ": Couldn't create relay app directory.\n"); return -ENOMEM; } chan = create_channel(subbuf_size, n_subbufs); if (!chan) { debugfs_remove(dir); - printk(KERN_ERR MODULE_NAME - ": relay app channel creation failed\n"); + pr_err(MODULE_NAME ": relay app channel creation failed\n"); return -ENOMEM; } - init_kmmio(); + reference_kmmio(); proc_marker_file = create_proc_entry(MARKER_FILE, 0, NULL); if (proc_marker_file) proc_marker_file->write_proc = write_marker; - printk(KERN_DEBUG MODULE_NAME ": loaded.\n"); + pr_debug(MODULE_NAME ": loaded.\n"); if (nommiotrace) - printk(KERN_DEBUG MODULE_NAME ": MMIO tracing disabled.\n"); + pr_info(MODULE_NAME ": MMIO tracing disabled.\n"); if (ISA_trace) - printk(KERN_WARNING MODULE_NAME - ": Warning! low ISA range will be traced.\n"); + pr_warning(MODULE_NAME ": Warning! low ISA range will be " + "traced.\n"); return 0; } static void __exit cleanup(void) { - printk(KERN_DEBUG MODULE_NAME ": unload...\n"); + pr_debug(MODULE_NAME ": unload...\n"); clear_trace_list(); - cleanup_kmmio(); + unreference_kmmio(); remove_proc_entry(MARKER_FILE, NULL); destroy_channel(); if (dir) diff --git a/arch/x86/kernel/mmiotrace/pf_in.c b/arch/x86/kernel/mmiotrace/pf_in.c index 67ea520dde62..efa1911e20ca 100644 --- a/arch/x86/kernel/mmiotrace/pf_in.c +++ b/arch/x86/kernel/mmiotrace/pf_in.c @@ -19,7 +19,7 @@ * */ -/* $Id: pf_in.c,v 1.1.1.1 2002/11/12 05:56:32 brlock Exp $ +/* Id: pf_in.c,v 1.1.1.1 2002/11/12 05:56:32 brlock Exp * Copyright by Intel Crop., 2002 * Louis Zhuang (louis.zhuang@intel.com) * diff --git a/arch/x86/kernel/mmiotrace/testmmiotrace.c b/arch/x86/kernel/mmiotrace/testmmiotrace.c index 40e66b0e6480..5ecff578672b 100644 --- a/arch/x86/kernel/mmiotrace/testmmiotrace.c +++ b/arch/x86/kernel/mmiotrace/testmmiotrace.c @@ -41,8 +41,7 @@ static void do_test(void) { void __iomem *p = ioremap_nocache_trace(mmio_address, 0x4000); if (!p) { - printk(KERN_ERR MODULE_NAME ": could not ioremap IO memory, " - "aborting.\n"); + pr_err(MODULE_NAME ": could not ioremap, aborting.\n"); return; } do_write_test(p); @@ -53,14 +52,14 @@ static void do_test(void) static int __init init(void) { if (mmio_address == 0) { - printk(KERN_ERR MODULE_NAME ": you have to use the module " - "argument mmio_address.\n"); - printk(KERN_ERR MODULE_NAME ": DO NOT LOAD THIS MODULE UNLESS" + pr_err(MODULE_NAME ": you have to use the module argument " + "mmio_address.\n"); + pr_err(MODULE_NAME ": DO NOT LOAD THIS MODULE UNLESS" " YOU REALLY KNOW WHAT YOU ARE DOING!\n"); return -ENXIO; } - printk(KERN_WARNING MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx " + pr_warning(MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx " "in PCI address space, and writing " "rubbish in there.\n", mmio_address); do_test(); @@ -69,7 +68,7 @@ static int __init init(void) static void __exit cleanup(void) { - printk(KERN_DEBUG MODULE_NAME ": unloaded.\n"); + pr_debug(MODULE_NAME ": unloaded.\n"); } module_init(init); diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index e9a086a1a9ff..8c828a68d3b6 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -49,60 +50,14 @@ #define PF_RSVD (1<<3) #define PF_INSTR (1<<4) -#ifdef CONFIG_MMIOTRACE_HOOKS -static pf_handler_func mmiotrace_pf_handler; /* protected by RCU */ -static DEFINE_SPINLOCK(mmiotrace_handler_lock); - -int mmiotrace_register_pf(pf_handler_func new_pfh) -{ - int ret = 0; - unsigned long flags; - spin_lock_irqsave(&mmiotrace_handler_lock, flags); - if (mmiotrace_pf_handler) - ret = -EBUSY; - else - mmiotrace_pf_handler = new_pfh; - spin_unlock_irqrestore(&mmiotrace_handler_lock, flags); - return ret; -} -EXPORT_SYMBOL_GPL(mmiotrace_register_pf); - -/** - * mmiotrace_unregister_pf: - * The caller must ensure @old_pfh is not in use anymore before freeing it. - * This function does not guarantee it. The handler function pointer is - * protected by RCU, so you can do this by e.g. calling synchronize_rcu(). - */ -int mmiotrace_unregister_pf(pf_handler_func old_pfh) -{ - int ret = 0; - unsigned long flags; - spin_lock_irqsave(&mmiotrace_handler_lock, flags); - if (mmiotrace_pf_handler != old_pfh) - ret = -EPERM; - else - mmiotrace_pf_handler = NULL; - spin_unlock_irqrestore(&mmiotrace_handler_lock, flags); - return ret; -} -EXPORT_SYMBOL_GPL(mmiotrace_unregister_pf); -#endif /* CONFIG_MMIOTRACE_HOOKS */ - -/* returns non-zero if do_page_fault() should return */ -static inline int call_mmiotrace(struct pt_regs *regs, - unsigned long error_code, - unsigned long address) +static inline int kmmio_fault(struct pt_regs *regs, unsigned long addr) { #ifdef CONFIG_MMIOTRACE_HOOKS - int ret = 0; - rcu_read_lock(); - if (mmiotrace_pf_handler) - ret = mmiotrace_pf_handler(regs, error_code, address); - rcu_read_unlock(); - return ret; -#else - return 0; + if (unlikely(is_kmmio_active())) + if (kmmio_handler(regs, addr) == 1) + return -1; #endif + return 0; } static inline int notify_page_fault(struct pt_regs *regs) @@ -657,7 +612,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) if (notify_page_fault(regs)) return; - if (call_mmiotrace(regs, error_code, address)) + if (unlikely(kmmio_fault(regs, address))) return; /* diff --git a/include/asm-x86/kdebug.h b/include/asm-x86/kdebug.h index 7063281040da..96651bb59ba1 100644 --- a/include/asm-x86/kdebug.h +++ b/include/asm-x86/kdebug.h @@ -35,11 +35,4 @@ extern void show_regs(struct pt_regs *regs); extern unsigned long oops_begin(void); extern void oops_end(unsigned long, struct pt_regs *, int signr); -typedef int (*pf_handler_func)(struct pt_regs *regs, - unsigned long error_code, - unsigned long address); - -extern int mmiotrace_register_pf(pf_handler_func new_pfh); -extern int mmiotrace_unregister_pf(pf_handler_func old_pfh); - #endif diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h index 6ec288f1fe24..d87a6cd8b686 100644 --- a/include/linux/mmiotrace.h +++ b/include/linux/mmiotrace.h @@ -3,6 +3,44 @@ #include +#ifdef __KERNEL__ + +#include + +struct kmmio_probe; +struct pt_regs; + +typedef void (*kmmio_pre_handler_t)(struct kmmio_probe *, + struct pt_regs *, unsigned long addr); +typedef void (*kmmio_post_handler_t)(struct kmmio_probe *, + unsigned long condition, struct pt_regs *); + +struct kmmio_probe { + struct list_head list; + unsigned long addr; /* start location of the probe point */ + unsigned long len; /* length of the probe region */ + kmmio_pre_handler_t pre_handler; /* Called before addr is executed. */ + kmmio_post_handler_t post_handler; /* Called after addr is executed */ +}; + +/* kmmio is active by some kmmio_probes? */ +static inline int is_kmmio_active(void) +{ + extern unsigned int kmmio_count; + return kmmio_count; +} + +extern void reference_kmmio(void); +extern void unreference_kmmio(void); +extern int register_kmmio_probe(struct kmmio_probe *p); +extern void unregister_kmmio_probe(struct kmmio_probe *p); + +/* Called from page fault handler. */ +extern int kmmio_handler(struct pt_regs *regs, unsigned long addr); + +#endif /* __KERNEL__ */ + + /* * If you change anything here, you must bump MMIO_VERSION. * This is the relay data format for user space. -- cgit v1.2.3 From d61fc44853f46fb002228b18aa5f30db21fcd4ac Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:57 +0200 Subject: x86: mmiotrace, preview 2 Kconfig.debug, Makefile and testmmiotrace.c style fixes. Use real mutex instead of mutex. Fix failure path in register probe func. kmmio: RCU read-locked over single stepping. Generate mapping id's. Make mmio-mod.c built-in and rewrite its locking. Add debugfs file to enable/disable mmiotracing. kmmio: use irqsave spinlocks. Lots of cleanups in mmio-mod.c Marker file moved from /proc into debugfs. Call mmiotrace entrypoints directly from ioremap.c. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 20 +- arch/x86/kernel/mmiotrace/Makefile | 2 +- arch/x86/kernel/mmiotrace/kmmio.c | 72 +++--- arch/x86/kernel/mmiotrace/mmio-mod.c | 397 ++++++++++++++++++++---------- arch/x86/kernel/mmiotrace/testmmiotrace.c | 15 +- arch/x86/mm/ioremap.c | 9 +- include/linux/mmiotrace.h | 18 +- 7 files changed, 332 insertions(+), 201 deletions(-) diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 9491c0ae03a3..aa0d6462b1fc 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -170,22 +170,19 @@ config IOMMU_LEAK config MMIOTRACE_HOOKS bool - default n config MMIOTRACE - tristate "Memory mapped IO tracing" + bool "Memory mapped IO tracing" depends on DEBUG_KERNEL && RELAY && DEBUG_FS select MMIOTRACE_HOOKS - default n + default y help - This will build a kernel module called mmiotrace. - Making this a built-in is heavily discouraged. - - Mmiotrace traces Memory Mapped I/O access and is meant for debugging - and reverse engineering. The kernel module offers wrapped - versions of the ioremap family of functions. The driver to be traced - must be modified to call these wrappers. A user space program is - required to collect the MMIO data. + Mmiotrace traces Memory Mapped I/O access and is meant for + debugging and reverse engineering. It is called from the ioremap + implementation and works via page faults. A user space program is + required to collect the MMIO data from debugfs files. + Tracing is disabled by default and can be enabled from a debugfs + file. See http://nouveau.freedesktop.org/wiki/MmioTrace If you are not helping to develop drivers, say N. @@ -193,7 +190,6 @@ config MMIOTRACE config MMIOTRACE_TEST tristate "Test module for mmiotrace" depends on MMIOTRACE && m - default n help This is a dumb module for testing mmiotrace. It is very dangerous as it will write garbage to IO memory starting at a given address. diff --git a/arch/x86/kernel/mmiotrace/Makefile b/arch/x86/kernel/mmiotrace/Makefile index cf1e747b463e..dbcd8d50fb8d 100644 --- a/arch/x86/kernel/mmiotrace/Makefile +++ b/arch/x86/kernel/mmiotrace/Makefile @@ -1,4 +1,4 @@ obj-$(CONFIG_MMIOTRACE_HOOKS) += kmmio.o obj-$(CONFIG_MMIOTRACE) += mmiotrace.o -mmiotrace-objs := pf_in.o mmio-mod.o +mmiotrace-y := pf_in.o mmio-mod.o obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index 539a9b19588f..efb467933087 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -59,7 +60,7 @@ struct kmmio_context { static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, void *args); -static DECLARE_MUTEX(kmmio_init_mutex); +static DEFINE_MUTEX(kmmio_init_mutex); static DEFINE_SPINLOCK(kmmio_lock); /* These are protected by kmmio_lock */ @@ -90,7 +91,7 @@ static struct notifier_block nb_die = { */ void reference_kmmio(void) { - down(&kmmio_init_mutex); + mutex_lock(&kmmio_init_mutex); spin_lock_irq(&kmmio_lock); if (!kmmio_initialized) { int i; @@ -101,7 +102,7 @@ void reference_kmmio(void) } kmmio_initialized++; spin_unlock_irq(&kmmio_lock); - up(&kmmio_init_mutex); + mutex_unlock(&kmmio_init_mutex); } EXPORT_SYMBOL_GPL(reference_kmmio); @@ -115,7 +116,7 @@ void unreference_kmmio(void) { bool unreg = false; - down(&kmmio_init_mutex); + mutex_lock(&kmmio_init_mutex); spin_lock_irq(&kmmio_lock); if (kmmio_initialized == 1) { @@ -128,7 +129,7 @@ void unreference_kmmio(void) if (unreg) unregister_die_notifier(&nb_die); /* calls sync_rcu() */ - up(&kmmio_init_mutex); + mutex_unlock(&kmmio_init_mutex); } EXPORT_SYMBOL(unreference_kmmio); @@ -244,17 +245,13 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) * Preemption is now disabled to prevent process switch during * single stepping. We can only handle one active kmmio trace * per cpu, so ensure that we finish it before something else - * gets to run. - * - * XXX what if an interrupt occurs between returning from - * do_page_fault() and entering the single-step exception handler? - * And that interrupt triggers a kmmio trap? - * XXX If we tracing an interrupt service routine or whatever, is - * this enough to keep it on the current cpu? + * gets to run. We also hold the RCU read lock over single + * stepping to avoid looking up the probe and kmmio_fault_page + * again. */ preempt_disable(); - rcu_read_lock(); + faultpage = get_kmmio_fault_page(addr); if (!faultpage) { /* @@ -287,14 +284,24 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) if (ctx->probe && ctx->probe->pre_handler) ctx->probe->pre_handler(ctx->probe, regs, addr); + /* + * Enable single-stepping and disable interrupts for the faulting + * context. Local interrupts must not get enabled during stepping. + */ regs->flags |= TF_MASK; regs->flags &= ~IF_MASK; /* Now we set present bit in PTE and single step. */ disarm_kmmio_fault_page(ctx->fpage->page, NULL); + /* + * If another cpu accesses the same page while we are stepping, + * the access will not be caught. It will simply succeed and the + * only downside is we lose the event. If this becomes a problem, + * the user should drop to single cpu before tracing. + */ + put_cpu_var(kmmio_ctx); - rcu_read_unlock(); return 1; no_kmmio_ctx: @@ -313,32 +320,15 @@ no_kmmio: static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) { int ret = 0; - struct kmmio_probe *probe; - struct kmmio_fault_page *faultpage; struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); if (!ctx->active) goto out; - rcu_read_lock(); - - faultpage = get_kmmio_fault_page(ctx->addr); - probe = get_kmmio_probe(ctx->addr); - if (faultpage != ctx->fpage || probe != ctx->probe) { - /* - * The trace setup changed after kmmio_handler() and before - * running this respective post handler. User does not want - * the result anymore. - */ - ctx->probe = NULL; - ctx->fpage = NULL; - } - if (ctx->probe && ctx->probe->post_handler) ctx->probe->post_handler(ctx->probe, condition, regs); - if (ctx->fpage) - arm_kmmio_fault_page(ctx->fpage->page, NULL); + arm_kmmio_fault_page(ctx->fpage->page, NULL); regs->flags &= ~TF_MASK; regs->flags |= ctx->saved_flags; @@ -346,6 +336,7 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) /* These were acquired in kmmio_handler(). */ ctx->active--; BUG_ON(ctx->active); + rcu_read_unlock(); preempt_enable_no_resched(); /* @@ -355,8 +346,6 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) */ if (!(regs->flags & TF_MASK)) ret = 1; - - rcu_read_unlock(); out: put_cpu_var(kmmio_ctx); return ret; @@ -411,15 +400,16 @@ static void release_kmmio_fault_page(unsigned long page, int register_kmmio_probe(struct kmmio_probe *p) { + unsigned long flags; int ret = 0; unsigned long size = 0; - spin_lock_irq(&kmmio_lock); - kmmio_count++; + spin_lock_irqsave(&kmmio_lock, flags); if (get_kmmio_probe(p->addr)) { ret = -EEXIST; goto out; } + kmmio_count++; list_add_rcu(&p->list, &kmmio_probes); while (size < p->len) { if (add_kmmio_fault_page(p->addr + size)) @@ -427,7 +417,7 @@ int register_kmmio_probe(struct kmmio_probe *p) size += PAGE_SIZE; } out: - spin_unlock_irq(&kmmio_lock); + spin_unlock_irqrestore(&kmmio_lock, flags); /* * XXX: What should I do here? * Here was a call to global_flush_tlb(), but it does not exist @@ -478,7 +468,8 @@ static void remove_kmmio_fault_pages(struct rcu_head *head) /* * Remove a kmmio probe. You have to synchronize_rcu() before you can be - * sure that the callbacks will not be called anymore. + * sure that the callbacks will not be called anymore. Only after that + * you may actually release your struct kmmio_probe. * * Unregistering a kmmio fault page has three steps: * 1. release_kmmio_fault_page() @@ -490,18 +481,19 @@ static void remove_kmmio_fault_pages(struct rcu_head *head) */ void unregister_kmmio_probe(struct kmmio_probe *p) { + unsigned long flags; unsigned long size = 0; struct kmmio_fault_page *release_list = NULL; struct kmmio_delayed_release *drelease; - spin_lock_irq(&kmmio_lock); + spin_lock_irqsave(&kmmio_lock, flags); while (size < p->len) { release_kmmio_fault_page(p->addr + size, &release_list); size += PAGE_SIZE; } list_del_rcu(&p->list); kmmio_count--; - spin_unlock_irq(&kmmio_lock); + spin_unlock_irqrestore(&kmmio_lock, flags); drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC); if (!drelease) { diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index e1a508588f03..738644061e4e 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -19,6 +19,8 @@ * * Derived from the read-mod example from relay-examples by Tom Zanussi. */ +#define DEBUG 1 + #include #include #include @@ -34,12 +36,12 @@ #include "pf_in.h" -/* This app's relay channel files will appear in /debug/mmio-trace */ -#define APP_DIR "mmio-trace" -/* the marker injection file in /proc */ -#define MARKER_FILE "mmio-marker" +#define NAME "mmiotrace: " -#define MODULE_NAME "mmiotrace" +/* This app's relay channel files will appear in /debug/mmio-trace */ +static const char APP_DIR[] = "mmio-trace"; +/* the marker injection file in /debug/APP_DIR */ +static const char MARKER_FILE[] = "mmio-marker"; struct trap_reason { unsigned long addr; @@ -48,6 +50,15 @@ struct trap_reason { int active_traces; }; +struct remap_trace { + struct list_head list; + struct kmmio_probe probe; + unsigned long phys; + unsigned long id; +}; + +static const size_t subbuf_size = 256*1024; + /* Accessed per-cpu. */ static DEFINE_PER_CPU(struct trap_reason, pf_reason); static DEFINE_PER_CPU(struct mm_io_header_rw, cpu_trace); @@ -55,33 +66,53 @@ static DEFINE_PER_CPU(struct mm_io_header_rw, cpu_trace); /* Access to this is not per-cpu. */ static DEFINE_PER_CPU(atomic_t, dropped); -static struct file_operations mmio_fops = { - .owner = THIS_MODULE, -}; +static struct dentry *dir; +static struct dentry *enabled_file; +static struct dentry *marker_file; -static const size_t subbuf_size = 256*1024; +static DEFINE_MUTEX(mmiotrace_mutex); +static DEFINE_SPINLOCK(trace_lock); +static atomic_t mmiotrace_enabled; +static LIST_HEAD(trace_list); /* struct remap_trace */ static struct rchan *chan; -static struct dentry *dir; -static struct proc_dir_entry *proc_marker_file; + +/* + * Locking in this file: + * - mmiotrace_mutex enforces enable/disable_mmiotrace() critical sections. + * - mmiotrace_enabled may be modified only when holding mmiotrace_mutex + * and trace_lock. + * - Routines depending on is_enabled() must take trace_lock. + * - trace_list users must hold trace_lock. + * - is_enabled() guarantees that chan is valid. + * - pre/post callbacks assume the effect of is_enabled() being true. + */ /* module parameters */ -static unsigned int n_subbufs = 32*4; -static unsigned long filter_offset; -static int nommiotrace; -static int ISA_trace; -static int trace_pc; +static unsigned int n_subbufs = 32*4; +static unsigned long filter_offset; +static int nommiotrace; +static int ISA_trace; +static int trace_pc; +static int enable_now; module_param(n_subbufs, uint, 0); module_param(filter_offset, ulong, 0); module_param(nommiotrace, bool, 0); module_param(ISA_trace, bool, 0); module_param(trace_pc, bool, 0); +module_param(enable_now, bool, 0); MODULE_PARM_DESC(n_subbufs, "Number of 256kB buffers, default 128."); MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); MODULE_PARM_DESC(trace_pc, "Record address of faulting instructions."); +MODULE_PARM_DESC(enable_now, "Start mmiotracing immediately on module load."); + +static bool is_enabled(void) +{ + return atomic_read(&mmiotrace_enabled); +} static void record_timestamp(struct mm_io_header *header) { @@ -93,15 +124,15 @@ static void record_timestamp(struct mm_io_header *header) } /* - * Write callback for the /proc entry: + * Write callback for the debugfs entry: * Read a marker and write it to the mmio trace log */ -static int write_marker(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t write_marker(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) { char *event = NULL; struct mm_io_header *headp; - int len = (count > 65535) ? 65535 : count; + ssize_t len = (count > 65535) ? 65535 : count; event = kzalloc(sizeof(*headp) + len, GFP_KERNEL); if (!event) @@ -117,7 +148,12 @@ static int write_marker(struct file *file, const char __user *buffer, return -EFAULT; } - relay_write(chan, event, sizeof(*headp) + len); + spin_lock_irq(&trace_lock); + if (is_enabled()) + relay_write(chan, event, sizeof(*headp) + len); + else + len = -EINVAL; + spin_unlock_irq(&trace_lock); kfree(event); return len; } @@ -128,19 +164,18 @@ static void print_pte(unsigned long address) pte_t *pte = lookup_address(address, &level); if (!pte) { - pr_err(MODULE_NAME ": Error in %s: no pte for page 0x%08lx\n", + pr_err(NAME "Error in %s: no pte for page 0x%08lx\n", __func__, address); return; } if (level == PG_LEVEL_2M) { - pr_emerg(MODULE_NAME ": 4MB pages are not currently " - "supported: %lx\n", address); + pr_emerg(NAME "4MB pages are not currently supported: " + "0x%08lx\n", address); BUG(); } - pr_info(MODULE_NAME ": pte for 0x%lx: 0x%lx 0x%lx\n", - address, pte_val(*pte), - pte_val(*pte) & _PAGE_PRESENT); + pr_info(NAME "pte for 0x%lx: 0x%lx 0x%lx\n", address, pte_val(*pte), + pte_val(*pte) & _PAGE_PRESENT); } /* @@ -150,22 +185,18 @@ static void print_pte(unsigned long address) static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) { const struct trap_reason *my_reason = &get_cpu_var(pf_reason); - pr_emerg(MODULE_NAME ": unexpected fault for address: %lx, " - "last fault for address: %lx\n", + pr_emerg(NAME "unexpected fault for address: 0x%08lx, " + "last fault for address: 0x%08lx\n", addr, my_reason->addr); print_pte(addr); + print_symbol(KERN_EMERG "faulting IP is at %s\n", regs->ip); + print_symbol(KERN_EMERG "last faulting IP was at %s\n", my_reason->ip); #ifdef __i386__ - print_symbol(KERN_EMERG "faulting EIP is at %s\n", regs->ip); - print_symbol(KERN_EMERG "last faulting EIP was at %s\n", - my_reason->ip); pr_emerg("eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", regs->ax, regs->bx, regs->cx, regs->dx); pr_emerg("esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", regs->si, regs->di, regs->bp, regs->sp); #else - print_symbol(KERN_EMERG "faulting RIP is at %s\n", regs->ip); - print_symbol(KERN_EMERG "last faulting RIP was at %s\n", - my_reason->ip); pr_emerg("rax: %016lx rcx: %016lx rdx: %016lx\n", regs->ax, regs->cx, regs->dx); pr_emerg("rsi: %016lx rdi: %016lx rbp: %016lx rsp: %016lx\n", @@ -197,6 +228,10 @@ static void pre(struct kmmio_probe *p, struct pt_regs *regs, my_trace->header.pid = 0; my_trace->header.data_len = sizeof(struct mm_io_rw); my_trace->rw.address = addr; + /* + * struct remap_trace *trace = p->user_data; + * phys = addr - trace->probe.addr + trace->phys; + */ /* * Only record the program counter when requested. @@ -246,15 +281,10 @@ static void post(struct kmmio_probe *p, unsigned long condition, struct trap_reason *my_reason = &get_cpu_var(pf_reason); struct mm_io_header_rw *my_trace = &get_cpu_var(cpu_trace); - /* - * XXX: This might not get called, if the probe is removed while - * trace hit is on flight. - */ - /* this should always return the active_trace count to 0 */ my_reason->active_traces--; if (my_reason->active_traces) { - pr_emerg(MODULE_NAME ": unexpected post handler"); + pr_emerg(NAME "unexpected post handler"); BUG(); } @@ -284,20 +314,23 @@ static int subbuf_start_handler(struct rchan_buf *buf, void *subbuf, int count; if (relay_buf_full(buf)) { if (atomic_inc_return(drop) == 1) - pr_err(MODULE_NAME ": cpu %d buffer full!\n", cpu); + pr_err(NAME "cpu %d buffer full!\n", cpu); return 0; } count = atomic_read(drop); if (count) { - pr_err(MODULE_NAME ": cpu %d buffer no longer full, " - "missed %d events.\n", - cpu, count); + pr_err(NAME "cpu %d buffer no longer full, missed %d events.\n", + cpu, count); atomic_sub(count, drop); } return 1; } +static struct file_operations mmio_fops = { + .owner = THIS_MODULE, +}; + /* file_create() callback. Creates relay file in debugfs. */ static struct dentry *create_buf_file_handler(const char *filename, struct dentry *parent, @@ -333,34 +366,10 @@ static struct rchan_callbacks relay_callbacks = { .remove_buf_file = remove_buf_file_handler, }; -/* - * create_channel - creates channel /debug/APP_DIR/cpuXXX - * Returns channel on success, NULL otherwise - */ -static struct rchan *create_channel(unsigned size, unsigned n) -{ - return relay_open("cpu", dir, size, n, &relay_callbacks, NULL); -} - -/* destroy_channel - destroys channel /debug/APP_DIR/cpuXXX */ -static void destroy_channel(void) -{ - if (chan) { - relay_close(chan); - chan = NULL; - } -} - -struct remap_trace { - struct list_head list; - struct kmmio_probe probe; -}; -static LIST_HEAD(trace_list); -static DEFINE_SPINLOCK(trace_list_lock); - -static void do_ioremap_trace_core(unsigned long offset, unsigned long size, +static void ioremap_trace_core(unsigned long offset, unsigned long size, void __iomem *addr) { + static atomic_t next_id; struct remap_trace *trace = kmalloc(sizeof(*trace), GFP_KERNEL); struct mm_io_header_map event = { .header = { @@ -380,61 +389,49 @@ static void do_ioremap_trace_core(unsigned long offset, unsigned long size, }; record_timestamp(&event.header); + if (!trace) { + pr_err(NAME "kmalloc failed in ioremap\n"); + return; + } + *trace = (struct remap_trace) { .probe = { .addr = (unsigned long)addr, .len = size, .pre_handler = pre, .post_handler = post, - } + .user_data = trace + }, + .phys = offset, + .id = atomic_inc_return(&next_id) }; + spin_lock_irq(&trace_lock); + if (!is_enabled()) + goto not_enabled; + relay_write(chan, &event, sizeof(event)); - spin_lock(&trace_list_lock); list_add_tail(&trace->list, &trace_list); - spin_unlock(&trace_list_lock); if (!nommiotrace) register_kmmio_probe(&trace->probe); + +not_enabled: + spin_unlock_irq(&trace_lock); } -static void ioremap_trace_core(unsigned long offset, unsigned long size, - void __iomem *addr) +void +mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr) { - if ((filter_offset) && (offset != filter_offset)) + if (!is_enabled()) /* recheck and proper locking in *_core() */ return; - /* Don't trace the low PCI/ISA area, it's always mapped.. */ - if (!ISA_trace && (offset < ISA_END_ADDRESS) && - (offset + size > ISA_START_ADDRESS)) { - pr_notice(MODULE_NAME ": Ignoring map of low PCI/ISA area " - "(0x%lx-0x%lx)\n", - offset, offset + size); + pr_debug(NAME "ioremap_*(0x%lx, 0x%lx) = %p\n", offset, size, addr); + if ((filter_offset) && (offset != filter_offset)) return; - } - do_ioremap_trace_core(offset, size, addr); -} - -void __iomem *ioremap_cache_trace(unsigned long offset, unsigned long size) -{ - void __iomem *p = ioremap_cache(offset, size); - pr_debug(MODULE_NAME ": ioremap_cache(0x%lx, 0x%lx) = %p\n", - offset, size, p); - ioremap_trace_core(offset, size, p); - return p; + ioremap_trace_core(offset, size, addr); } -EXPORT_SYMBOL(ioremap_cache_trace); -void __iomem *ioremap_nocache_trace(unsigned long offset, unsigned long size) -{ - void __iomem *p = ioremap_nocache(offset, size); - pr_debug(MODULE_NAME ": ioremap_nocache(0x%lx, 0x%lx) = %p\n", - offset, size, p); - ioremap_trace_core(offset, size, p); - return p; -} -EXPORT_SYMBOL(ioremap_nocache_trace); - -void iounmap_trace(volatile void __iomem *addr) +static void iounmap_trace_core(volatile void __iomem *addr) { struct mm_io_header_map event = { .header = { @@ -454,84 +451,212 @@ void iounmap_trace(volatile void __iomem *addr) }; struct remap_trace *trace; struct remap_trace *tmp; - pr_debug(MODULE_NAME ": Unmapping %p.\n", addr); + struct remap_trace *found_trace = NULL; + + pr_debug(NAME "Unmapping %p.\n", addr); record_timestamp(&event.header); - spin_lock(&trace_list_lock); + spin_lock_irq(&trace_lock); + if (!is_enabled()) + goto not_enabled; + list_for_each_entry_safe(trace, tmp, &trace_list, list) { if ((unsigned long)addr == trace->probe.addr) { if (!nommiotrace) unregister_kmmio_probe(&trace->probe); list_del(&trace->list); - kfree(trace); + found_trace = trace; break; } } - spin_unlock(&trace_list_lock); relay_write(chan, &event, sizeof(event)); - iounmap(addr); + +not_enabled: + spin_unlock_irq(&trace_lock); + if (found_trace) { + synchronize_rcu(); /* unregister_kmmio_probe() requirement */ + kfree(found_trace); + } +} + +void mmiotrace_iounmap(volatile void __iomem *addr) +{ + might_sleep(); + if (is_enabled()) /* recheck and proper locking in *_core() */ + iounmap_trace_core(addr); } -EXPORT_SYMBOL(iounmap_trace); static void clear_trace_list(void) { struct remap_trace *trace; struct remap_trace *tmp; - spin_lock(&trace_list_lock); - list_for_each_entry_safe(trace, tmp, &trace_list, list) { - pr_warning(MODULE_NAME ": purging non-iounmapped " + /* + * No locking required, because the caller ensures we are in a + * critical section via mutex, and is_enabled() is false, + * i.e. nothing can traverse or modify this list. + * Caller also ensures is_enabled() cannot change. + */ + list_for_each_entry(trace, &trace_list, list) { + pr_notice(NAME "purging non-iounmapped " "trace @0x%08lx, size 0x%lx.\n", trace->probe.addr, trace->probe.len); if (!nommiotrace) unregister_kmmio_probe(&trace->probe); + } + synchronize_rcu(); /* unregister_kmmio_probe() requirement */ + + list_for_each_entry_safe(trace, tmp, &trace_list, list) { list_del(&trace->list); kfree(trace); + } +} + +static ssize_t read_enabled_file_bool(struct file *file, + char __user *user_buf, size_t count, loff_t *ppos) +{ + char buf[3]; + + if (is_enabled()) + buf[0] = '1'; + else + buf[0] = '0'; + buf[1] = '\n'; + buf[2] = '\0'; + return simple_read_from_buffer(user_buf, count, ppos, buf, 2); +} + +static void enable_mmiotrace(void); +static void disable_mmiotrace(void); + +static ssize_t write_enabled_file_bool(struct file *file, + const char __user *user_buf, size_t count, loff_t *ppos) +{ + char buf[32]; + int buf_size = min(count, (sizeof(buf)-1)); + + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + switch (buf[0]) { + case 'y': + case 'Y': + case '1': + enable_mmiotrace(); + break; + case 'n': + case 'N': + case '0': + disable_mmiotrace(); break; } - spin_unlock(&trace_list_lock); + + return count; +} + +/* this ripped from kernel/kprobes.c */ +static struct file_operations fops_enabled = { + .owner = THIS_MODULE, + .read = read_enabled_file_bool, + .write = write_enabled_file_bool +}; + +static struct file_operations fops_marker = { + .owner = THIS_MODULE, + .write = write_marker +}; + +static void enable_mmiotrace(void) +{ + mutex_lock(&mmiotrace_mutex); + if (is_enabled()) + goto out; + + chan = relay_open("cpu", dir, subbuf_size, n_subbufs, + &relay_callbacks, NULL); + if (!chan) { + pr_err(NAME "relay app channel creation failed.\n"); + goto out; + } + + reference_kmmio(); + + marker_file = debugfs_create_file("marker", 0660, dir, NULL, + &fops_marker); + if (!marker_file) + pr_err(NAME "marker file creation failed.\n"); + + if (nommiotrace) + pr_info(NAME "MMIO tracing disabled.\n"); + if (ISA_trace) + pr_warning(NAME "Warning! low ISA range will be traced.\n"); + spin_lock_irq(&trace_lock); + atomic_inc(&mmiotrace_enabled); + spin_unlock_irq(&trace_lock); + pr_info(NAME "enabled.\n"); +out: + mutex_unlock(&mmiotrace_mutex); +} + +static void disable_mmiotrace(void) +{ + mutex_lock(&mmiotrace_mutex); + if (!is_enabled()) + goto out; + + spin_lock_irq(&trace_lock); + atomic_dec(&mmiotrace_enabled); + BUG_ON(is_enabled()); + spin_unlock_irq(&trace_lock); + + clear_trace_list(); /* guarantees: no more kmmio callbacks */ + unreference_kmmio(); + if (marker_file) { + debugfs_remove(marker_file); + marker_file = NULL; + } + if (chan) { + relay_close(chan); + chan = NULL; + } + + pr_info(NAME "disabled.\n"); +out: + mutex_unlock(&mmiotrace_mutex); } static int __init init(void) { + pr_debug(NAME "load...\n"); if (n_subbufs < 2) return -EINVAL; dir = debugfs_create_dir(APP_DIR, NULL); if (!dir) { - pr_err(MODULE_NAME ": Couldn't create relay app directory.\n"); + pr_err(NAME "Couldn't create relay app directory.\n"); return -ENOMEM; } - chan = create_channel(subbuf_size, n_subbufs); - if (!chan) { + enabled_file = debugfs_create_file("enabled", 0600, dir, NULL, + &fops_enabled); + if (!enabled_file) { + pr_err(NAME "Couldn't create enabled file.\n"); debugfs_remove(dir); - pr_err(MODULE_NAME ": relay app channel creation failed\n"); return -ENOMEM; } - reference_kmmio(); - - proc_marker_file = create_proc_entry(MARKER_FILE, 0, NULL); - if (proc_marker_file) - proc_marker_file->write_proc = write_marker; + if (enable_now) + enable_mmiotrace(); - pr_debug(MODULE_NAME ": loaded.\n"); - if (nommiotrace) - pr_info(MODULE_NAME ": MMIO tracing disabled.\n"); - if (ISA_trace) - pr_warning(MODULE_NAME ": Warning! low ISA range will be " - "traced.\n"); return 0; } static void __exit cleanup(void) { - pr_debug(MODULE_NAME ": unload...\n"); - clear_trace_list(); - unreference_kmmio(); - remove_proc_entry(MARKER_FILE, NULL); - destroy_channel(); + pr_debug(NAME "unload...\n"); + if (enabled_file) + debugfs_remove(enabled_file); + disable_mmiotrace(); if (dir) debugfs_remove(dir); } diff --git a/arch/x86/kernel/mmiotrace/testmmiotrace.c b/arch/x86/kernel/mmiotrace/testmmiotrace.c index 5ecff578672b..cfa60b227c8d 100644 --- a/arch/x86/kernel/mmiotrace/testmmiotrace.c +++ b/arch/x86/kernel/mmiotrace/testmmiotrace.c @@ -4,10 +4,6 @@ #include #include -extern void __iomem *ioremap_nocache_trace(unsigned long offset, - unsigned long size); -extern void iounmap_trace(volatile void __iomem *addr); - #define MODULE_NAME "testmmiotrace" static unsigned long mmio_address; @@ -28,25 +24,24 @@ static void do_write_test(void __iomem *p) static void do_read_test(void __iomem *p) { unsigned int i; - volatile unsigned int v; for (i = 0; i < 256; i++) - v = ioread8(p + i); + ioread8(p + i); for (i = 1024; i < (5 * 1024); i += 2) - v = ioread16(p + i); + ioread16(p + i); for (i = (5 * 1024); i < (16 * 1024); i += 4) - v = ioread32(p + i); + ioread32(p + i); } static void do_test(void) { - void __iomem *p = ioremap_nocache_trace(mmio_address, 0x4000); + void __iomem *p = ioremap_nocache(mmio_address, 0x4000); if (!p) { pr_err(MODULE_NAME ": could not ioremap, aborting.\n"); return; } do_write_test(p); do_read_test(p); - iounmap_trace(p); + iounmap(p); } static int __init init(void) diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 71bb3159031a..8927c878544d 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -126,6 +127,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, unsigned long new_prot_val; pgprot_t prot; int retval; + void __iomem *ret_addr; /* Don't allow wraparound or zero size */ last_addr = phys_addr + size - 1; @@ -233,7 +235,10 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, return NULL; } - return (void __iomem *) (vaddr + offset); + ret_addr = (void __iomem *) (vaddr + offset); + mmiotrace_ioremap(phys_addr, size, ret_addr); + + return ret_addr; } /** @@ -325,6 +330,8 @@ void iounmap(volatile void __iomem *addr) addr = (volatile void __iomem *) (PAGE_MASK & (unsigned long __force)addr); + mmiotrace_iounmap(addr); + /* Use the vm area unlocked, assuming the caller ensures there isn't another iounmap for the same address in parallel. Reuse of the virtual address is prevented by diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h index d87a6cd8b686..cb5efd0c7f51 100644 --- a/include/linux/mmiotrace.h +++ b/include/linux/mmiotrace.h @@ -16,11 +16,12 @@ typedef void (*kmmio_post_handler_t)(struct kmmio_probe *, unsigned long condition, struct pt_regs *); struct kmmio_probe { - struct list_head list; + struct list_head list; /* kmmio internal list */ unsigned long addr; /* start location of the probe point */ unsigned long len; /* length of the probe region */ kmmio_pre_handler_t pre_handler; /* Called before addr is executed. */ kmmio_post_handler_t post_handler; /* Called after addr is executed */ + void *user_data; }; /* kmmio is active by some kmmio_probes? */ @@ -38,6 +39,21 @@ extern void unregister_kmmio_probe(struct kmmio_probe *p); /* Called from page fault handler. */ extern int kmmio_handler(struct pt_regs *regs, unsigned long addr); +/* Called from ioremap.c */ +#ifdef CONFIG_MMIOTRACE +extern void +mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr); +extern void mmiotrace_iounmap(volatile void __iomem *addr); +#else +static inline void +mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr) +{ +} +static inline void mmiotrace_iounmap(volatile void __iomem *addr) +{ +} +#endif /* CONFIG_MMIOTRACE_HOOKS */ + #endif /* __KERNEL__ */ -- cgit v1.2.3 From f984b51e0779a6dd30feedc41404013ca54e5d05 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:57 +0200 Subject: ftrace: add mmiotrace plugin On Sat, 22 Mar 2008 13:07:47 +0100 Ingo Molnar wrote: > > > i'd suggest the following: pull x86.git and sched-devel.git into a > > > single tree [the two will combine without rejects]. Then try to add a > > > kernel/tracing/trace_mmiotrace.c ftrace plugin. The trace_sysprof.c > > > plugin might be a good example. > > > > I did this and now I have mmiotrace enabled/disabled via the tracing > > framework (what do we call this, since ftrace is one of the tracers?). > > cool! could you send the patches for that? (even if they are not fully > functional yet) Patch attached in the end. Nice to see how much code disappeared. I tried to mark all the features I had to break with XXX-comments. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 3 +- arch/x86/kernel/mmiotrace/mmio-mod.c | 208 +++++------------------------------ include/linux/mmiotrace.h | 6 + kernel/trace/Makefile | 1 + kernel/trace/trace_mmiotrace.c | 84 ++++++++++++++ 5 files changed, 123 insertions(+), 179 deletions(-) create mode 100644 kernel/trace/trace_mmiotrace.c diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index aa0d6462b1fc..7e4b8494078e 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -173,7 +173,8 @@ config MMIOTRACE_HOOKS config MMIOTRACE bool "Memory mapped IO tracing" - depends on DEBUG_KERNEL && RELAY && DEBUG_FS + depends on DEBUG_KERNEL && RELAY + select TRACING select MMIOTRACE_HOOKS default y help diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index 738644061e4e..c7a67d7e482b 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -22,9 +22,8 @@ #define DEBUG 1 #include -#include #include -#include +#include #include #include #include @@ -63,18 +62,18 @@ static const size_t subbuf_size = 256*1024; static DEFINE_PER_CPU(struct trap_reason, pf_reason); static DEFINE_PER_CPU(struct mm_io_header_rw, cpu_trace); +#if 0 /* XXX: no way gather this info anymore */ /* Access to this is not per-cpu. */ static DEFINE_PER_CPU(atomic_t, dropped); +#endif static struct dentry *dir; -static struct dentry *enabled_file; static struct dentry *marker_file; static DEFINE_MUTEX(mmiotrace_mutex); static DEFINE_SPINLOCK(trace_lock); static atomic_t mmiotrace_enabled; static LIST_HEAD(trace_list); /* struct remap_trace */ -static struct rchan *chan; /* * Locking in this file: @@ -93,36 +92,24 @@ static unsigned long filter_offset; static int nommiotrace; static int ISA_trace; static int trace_pc; -static int enable_now; module_param(n_subbufs, uint, 0); module_param(filter_offset, ulong, 0); module_param(nommiotrace, bool, 0); module_param(ISA_trace, bool, 0); module_param(trace_pc, bool, 0); -module_param(enable_now, bool, 0); MODULE_PARM_DESC(n_subbufs, "Number of 256kB buffers, default 128."); MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); MODULE_PARM_DESC(trace_pc, "Record address of faulting instructions."); -MODULE_PARM_DESC(enable_now, "Start mmiotracing immediately on module load."); static bool is_enabled(void) { return atomic_read(&mmiotrace_enabled); } -static void record_timestamp(struct mm_io_header *header) -{ - struct timespec now; - - getnstimeofday(&now); - header->sec = now.tv_sec; - header->nsec = now.tv_nsec; -} - /* * Write callback for the debugfs entry: * Read a marker and write it to the mmio trace log @@ -141,7 +128,6 @@ static ssize_t write_marker(struct file *file, const char __user *buffer, headp = (struct mm_io_header *)event; headp->type = MMIO_MAGIC | (MMIO_MARKER << MMIO_OPCODE_SHIFT); headp->data_len = len; - record_timestamp(headp); if (copy_from_user(event + sizeof(*headp), buffer, len)) { kfree(event); @@ -149,9 +135,11 @@ static ssize_t write_marker(struct file *file, const char __user *buffer, } spin_lock_irq(&trace_lock); +#if 0 /* XXX: convert this to use tracing */ if (is_enabled()) relay_write(chan, event, sizeof(*headp) + len); else +#endif len = -EINVAL; spin_unlock_irq(&trace_lock); kfree(event); @@ -242,7 +230,11 @@ static void pre(struct kmmio_probe *p, struct pt_regs *regs, else my_trace->rw.pc = 0; - record_timestamp(&my_trace->header); + /* + * XXX: the timestamp recorded will be *after* the tracing has been + * done, not at the time we hit the instruction. SMP implications + * on event ordering? + */ switch (type) { case REG_READ: @@ -295,77 +287,19 @@ static void post(struct kmmio_probe *p, unsigned long condition, default: break; } - relay_write(chan, my_trace, sizeof(*my_trace)); + + /* + * XXX: Several required values are ignored: + * - mapping id + * - program counter + * Also the address should be physical, not virtual. + */ + mmio_trace_record(my_trace->header.type, my_trace->rw.address, + my_trace->rw.value); put_cpu_var(cpu_trace); put_cpu_var(pf_reason); } -/* - * subbuf_start() relay callback. - * - * Defined so that we know when events are dropped due to the buffer-full - * condition. - */ -static int subbuf_start_handler(struct rchan_buf *buf, void *subbuf, - void *prev_subbuf, size_t prev_padding) -{ - unsigned int cpu = buf->cpu; - atomic_t *drop = &per_cpu(dropped, cpu); - int count; - if (relay_buf_full(buf)) { - if (atomic_inc_return(drop) == 1) - pr_err(NAME "cpu %d buffer full!\n", cpu); - return 0; - } - count = atomic_read(drop); - if (count) { - pr_err(NAME "cpu %d buffer no longer full, missed %d events.\n", - cpu, count); - atomic_sub(count, drop); - } - - return 1; -} - -static struct file_operations mmio_fops = { - .owner = THIS_MODULE, -}; - -/* file_create() callback. Creates relay file in debugfs. */ -static struct dentry *create_buf_file_handler(const char *filename, - struct dentry *parent, - int mode, - struct rchan_buf *buf, - int *is_global) -{ - struct dentry *buf_file; - - mmio_fops.read = relay_file_operations.read; - mmio_fops.open = relay_file_operations.open; - mmio_fops.poll = relay_file_operations.poll; - mmio_fops.mmap = relay_file_operations.mmap; - mmio_fops.release = relay_file_operations.release; - mmio_fops.splice_read = relay_file_operations.splice_read; - - buf_file = debugfs_create_file(filename, mode, parent, buf, - &mmio_fops); - - return buf_file; -} - -/* file_remove() default callback. Removes relay file in debugfs. */ -static int remove_buf_file_handler(struct dentry *dentry) -{ - debugfs_remove(dentry); - return 0; -} - -static struct rchan_callbacks relay_callbacks = { - .subbuf_start = subbuf_start_handler, - .create_buf_file = create_buf_file_handler, - .remove_buf_file = remove_buf_file_handler, -}; - static void ioremap_trace_core(unsigned long offset, unsigned long size, void __iomem *addr) { @@ -387,7 +321,6 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, .pc = 0 } }; - record_timestamp(&event.header); if (!trace) { pr_err(NAME "kmalloc failed in ioremap\n"); @@ -410,7 +343,10 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, if (!is_enabled()) goto not_enabled; - relay_write(chan, &event, sizeof(event)); + /* + * XXX: Insufficient data recorded! + */ + mmio_trace_record(event.header.type, event.map.addr, event.map.len); list_add_tail(&trace->list, &trace_list); if (!nommiotrace) register_kmmio_probe(&trace->probe); @@ -454,7 +390,6 @@ static void iounmap_trace_core(volatile void __iomem *addr) struct remap_trace *found_trace = NULL; pr_debug(NAME "Unmapping %p.\n", addr); - record_timestamp(&event.header); spin_lock_irq(&trace_lock); if (!is_enabled()) @@ -469,7 +404,8 @@ static void iounmap_trace_core(volatile void __iomem *addr) break; } } - relay_write(chan, &event, sizeof(event)); + mmio_trace_record(event.header.type, event.map.addr, + found_trace ? found_trace->id : -1); not_enabled: spin_unlock_irq(&trace_lock); @@ -512,77 +448,23 @@ static void clear_trace_list(void) } } -static ssize_t read_enabled_file_bool(struct file *file, - char __user *user_buf, size_t count, loff_t *ppos) -{ - char buf[3]; - - if (is_enabled()) - buf[0] = '1'; - else - buf[0] = '0'; - buf[1] = '\n'; - buf[2] = '\0'; - return simple_read_from_buffer(user_buf, count, ppos, buf, 2); -} - -static void enable_mmiotrace(void); -static void disable_mmiotrace(void); - -static ssize_t write_enabled_file_bool(struct file *file, - const char __user *user_buf, size_t count, loff_t *ppos) -{ - char buf[32]; - int buf_size = min(count, (sizeof(buf)-1)); - - if (copy_from_user(buf, user_buf, buf_size)) - return -EFAULT; - - switch (buf[0]) { - case 'y': - case 'Y': - case '1': - enable_mmiotrace(); - break; - case 'n': - case 'N': - case '0': - disable_mmiotrace(); - break; - } - - return count; -} - -/* this ripped from kernel/kprobes.c */ -static struct file_operations fops_enabled = { - .owner = THIS_MODULE, - .read = read_enabled_file_bool, - .write = write_enabled_file_bool -}; - static struct file_operations fops_marker = { .owner = THIS_MODULE, .write = write_marker }; -static void enable_mmiotrace(void) +void enable_mmiotrace(void) { mutex_lock(&mmiotrace_mutex); if (is_enabled()) goto out; - chan = relay_open("cpu", dir, subbuf_size, n_subbufs, - &relay_callbacks, NULL); - if (!chan) { - pr_err(NAME "relay app channel creation failed.\n"); - goto out; - } - reference_kmmio(); +#if 0 /* XXX: tracing does not support text entries */ marker_file = debugfs_create_file("marker", 0660, dir, NULL, &fops_marker); +#endif if (!marker_file) pr_err(NAME "marker file creation failed.\n"); @@ -598,7 +480,7 @@ out: mutex_unlock(&mmiotrace_mutex); } -static void disable_mmiotrace(void) +void disable_mmiotrace(void) { mutex_lock(&mmiotrace_mutex); if (!is_enabled()) @@ -615,17 +497,13 @@ static void disable_mmiotrace(void) debugfs_remove(marker_file); marker_file = NULL; } - if (chan) { - relay_close(chan); - chan = NULL; - } pr_info(NAME "disabled.\n"); out: mutex_unlock(&mmiotrace_mutex); } -static int __init init(void) +int __init init_mmiotrace(void) { pr_debug(NAME "load...\n"); if (n_subbufs < 2) @@ -636,31 +514,5 @@ static int __init init(void) pr_err(NAME "Couldn't create relay app directory.\n"); return -ENOMEM; } - - enabled_file = debugfs_create_file("enabled", 0600, dir, NULL, - &fops_enabled); - if (!enabled_file) { - pr_err(NAME "Couldn't create enabled file.\n"); - debugfs_remove(dir); - return -ENOMEM; - } - - if (enable_now) - enable_mmiotrace(); - return 0; } - -static void __exit cleanup(void) -{ - pr_debug(NAME "unload...\n"); - if (enabled_file) - debugfs_remove(enabled_file); - disable_mmiotrace(); - if (dir) - debugfs_remove(dir); -} - -module_init(init); -module_exit(cleanup); -MODULE_LICENSE("GPL"); diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h index cb5efd0c7f51..579b3b06c90e 100644 --- a/include/linux/mmiotrace.h +++ b/include/linux/mmiotrace.h @@ -54,6 +54,12 @@ static inline void mmiotrace_iounmap(volatile void __iomem *addr) } #endif /* CONFIG_MMIOTRACE_HOOKS */ +/* in kernel/trace/trace_mmiotrace.c */ +extern int __init init_mmiotrace(void); +extern void enable_mmiotrace(void); +extern void disable_mmiotrace(void); +extern void mmio_trace_record(u32 type, unsigned long addr, unsigned long arg); + #endif /* __KERNEL__ */ diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index d9efbbfa2bdf..c44a7dce9086 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -18,5 +18,6 @@ obj-$(CONFIG_FTRACE) += trace_functions.o obj-$(CONFIG_IRQSOFF_TRACER) += trace_irqsoff.o obj-$(CONFIG_PREEMPT_TRACER) += trace_irqsoff.o obj-$(CONFIG_SCHED_TRACER) += trace_sched_wakeup.o +obj-$(CONFIG_MMIOTRACE) += trace_mmiotrace.o libftrace-y := ftrace.o diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c new file mode 100644 index 000000000000..e4dd03cc5aa6 --- /dev/null +++ b/kernel/trace/trace_mmiotrace.c @@ -0,0 +1,84 @@ +/* + * Memory mapped I/O tracing + * + * Copyright (C) 2008 Pekka Paalanen + */ + +#define DEBUG 1 + +#include +#include + +#include "trace.h" + +extern void +__trace_special(void *__tr, void *__data, + unsigned long arg1, unsigned long arg2, unsigned long arg3); + +static struct trace_array *mmio_trace_array; + + +static void mmio_trace_init(struct trace_array *tr) +{ + pr_debug("in %s\n", __func__); + mmio_trace_array = tr; + if (tr->ctrl) + enable_mmiotrace(); +} + +static void mmio_trace_reset(struct trace_array *tr) +{ + pr_debug("in %s\n", __func__); + if (tr->ctrl) + disable_mmiotrace(); +} + +static void mmio_trace_ctrl_update(struct trace_array *tr) +{ + pr_debug("in %s\n", __func__); + if (tr->ctrl) + enable_mmiotrace(); + else + disable_mmiotrace(); +} + +static struct tracer mmio_tracer __read_mostly = +{ + .name = "mmiotrace", + .init = mmio_trace_init, + .reset = mmio_trace_reset, + .ctrl_update = mmio_trace_ctrl_update, +}; + +__init static int init_mmio_trace(void) +{ + int ret = init_mmiotrace(); + if (ret) + return ret; + return register_tracer(&mmio_tracer); +} +device_initcall(init_mmio_trace); + +void mmio_trace_record(u32 type, unsigned long addr, unsigned long arg) +{ + struct trace_array *tr = mmio_trace_array; + struct trace_array_cpu *data = tr->data[smp_processor_id()]; + + if (!current || current->pid == 0) { + /* + * XXX: This is a problem. We need to able to record, no + * matter what. tracing_generic_entry_update() would crash. + */ + static unsigned limit; + if (limit++ < 12) + pr_err("Error in %s: no current.\n", __func__); + return; + } + if (!tr || !data) { + static unsigned limit; + if (limit++ < 12) + pr_err("%s: no tr or data\n", __func__); + return; + } + __trace_special(tr, data, type, addr, arg); +} -- cgit v1.2.3 From bd8ac686c73c7e925fcfe0b02dc4e7b947127864 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:57 +0200 Subject: ftrace: mmiotrace, updates here is a patch that makes mmiotrace work almost well within the tracing framework. The patch applies on top of my previous patch. I have my own output formatting in place now. Summary of changes: - fix the NULL dereference that was due to not calling tracing_reset() - add print_line() callback into struct tracer - implement print_line() for mmiotrace, producing up-to-spec text - add my output header, but that is not really called in the right place - rewrote the main structs in mmiotrace - added two new trace entry types: TRACE_MMIO_RW and TRACE_MMIO_MAP - made some functions in trace.c non-static - check current==NULL in tracing_generic_entry_update() - fix(?) comparison in trace_seq_printf() Things seem to work fine except a few issues. Markers (text lines injected into mmiotrace log) are missing, I did not feel hacking them in before we have variable length entries. My output header is printed only for 'trace' file, but not 'trace_pipe'. For some reason, despite my quick fix, iter->trace is NULL in print_trace_line() when called from 'trace_pipe' file, which means I don't get proper output formatting. I only tried by loading nouveau.ko, which just detects the card, and that is traced fine. I didn't try further. Map, two reads and unmap. Works perfectly. I am missing the information about overflows, I'd prefer to have a counter for lost events. I didn't try, but I guess currently there is no way of knowning when it overflows? So, not too far from being fully operational, it seems :-) And looking at the diffstat, there also is some 700-900 lines of user space code that just became obsolete. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 2 +- arch/x86/kernel/mmiotrace/mmio-mod.c | 140 ++++++++++---------------------- include/linux/mmiotrace.h | 85 ++++++-------------- kernel/trace/trace.c | 34 ++++++++ kernel/trace/trace.h | 14 ++++ kernel/trace/trace_mmiotrace.c | 151 ++++++++++++++++++++++++++++------- 6 files changed, 238 insertions(+), 188 deletions(-) diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 7e4b8494078e..1d6de0d67f99 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -173,7 +173,7 @@ config MMIOTRACE_HOOKS config MMIOTRACE bool "Memory mapped IO tracing" - depends on DEBUG_KERNEL && RELAY + depends on DEBUG_KERNEL select TRACING select MMIOTRACE_HOOKS default y diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index c7a67d7e482b..62abc281a512 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -37,11 +37,6 @@ #define NAME "mmiotrace: " -/* This app's relay channel files will appear in /debug/mmio-trace */ -static const char APP_DIR[] = "mmio-trace"; -/* the marker injection file in /debug/APP_DIR */ -static const char MARKER_FILE[] = "mmio-marker"; - struct trap_reason { unsigned long addr; unsigned long ip; @@ -56,18 +51,15 @@ struct remap_trace { unsigned long id; }; -static const size_t subbuf_size = 256*1024; - /* Accessed per-cpu. */ static DEFINE_PER_CPU(struct trap_reason, pf_reason); -static DEFINE_PER_CPU(struct mm_io_header_rw, cpu_trace); +static DEFINE_PER_CPU(struct mmiotrace_rw, cpu_trace); #if 0 /* XXX: no way gather this info anymore */ /* Access to this is not per-cpu. */ static DEFINE_PER_CPU(atomic_t, dropped); #endif -static struct dentry *dir; static struct dentry *marker_file; static DEFINE_MUTEX(mmiotrace_mutex); @@ -82,24 +74,21 @@ static LIST_HEAD(trace_list); /* struct remap_trace */ * and trace_lock. * - Routines depending on is_enabled() must take trace_lock. * - trace_list users must hold trace_lock. - * - is_enabled() guarantees that chan is valid. + * - is_enabled() guarantees that mmio_trace_record is allowed. * - pre/post callbacks assume the effect of is_enabled() being true. */ /* module parameters */ -static unsigned int n_subbufs = 32*4; static unsigned long filter_offset; static int nommiotrace; static int ISA_trace; static int trace_pc; -module_param(n_subbufs, uint, 0); module_param(filter_offset, ulong, 0); module_param(nommiotrace, bool, 0); module_param(ISA_trace, bool, 0); module_param(trace_pc, bool, 0); -MODULE_PARM_DESC(n_subbufs, "Number of 256kB buffers, default 128."); MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); @@ -110,6 +99,7 @@ static bool is_enabled(void) return atomic_read(&mmiotrace_enabled); } +#if 0 /* XXX: needs rewrite */ /* * Write callback for the debugfs entry: * Read a marker and write it to the mmio trace log @@ -145,6 +135,7 @@ static ssize_t write_marker(struct file *file, const char __user *buffer, kfree(event); return len; } +#endif static void print_pte(unsigned long address) { @@ -198,9 +189,10 @@ static void pre(struct kmmio_probe *p, struct pt_regs *regs, unsigned long addr) { struct trap_reason *my_reason = &get_cpu_var(pf_reason); - struct mm_io_header_rw *my_trace = &get_cpu_var(cpu_trace); + struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); const unsigned long instptr = instruction_pointer(regs); const enum reason_type type = get_ins_type(instptr); + struct remap_trace *trace = p->user_data; /* it doesn't make sense to have more than one active trace per cpu */ if (my_reason->active_traces) @@ -212,23 +204,17 @@ static void pre(struct kmmio_probe *p, struct pt_regs *regs, my_reason->addr = addr; my_reason->ip = instptr; - my_trace->header.type = MMIO_MAGIC; - my_trace->header.pid = 0; - my_trace->header.data_len = sizeof(struct mm_io_rw); - my_trace->rw.address = addr; - /* - * struct remap_trace *trace = p->user_data; - * phys = addr - trace->probe.addr + trace->phys; - */ + my_trace->phys = addr - trace->probe.addr + trace->phys; + my_trace->map_id = trace->id; /* * Only record the program counter when requested. * It may taint clean-room reverse engineering. */ if (trace_pc) - my_trace->rw.pc = instptr; + my_trace->pc = instptr; else - my_trace->rw.pc = 0; + my_trace->pc = 0; /* * XXX: the timestamp recorded will be *after* the tracing has been @@ -238,28 +224,25 @@ static void pre(struct kmmio_probe *p, struct pt_regs *regs, switch (type) { case REG_READ: - my_trace->header.type |= - (MMIO_READ << MMIO_OPCODE_SHIFT) | - (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); + my_trace->opcode = MMIO_READ; + my_trace->width = get_ins_mem_width(instptr); break; case REG_WRITE: - my_trace->header.type |= - (MMIO_WRITE << MMIO_OPCODE_SHIFT) | - (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); - my_trace->rw.value = get_ins_reg_val(instptr, regs); + my_trace->opcode = MMIO_WRITE; + my_trace->width = get_ins_mem_width(instptr); + my_trace->value = get_ins_reg_val(instptr, regs); break; case IMM_WRITE: - my_trace->header.type |= - (MMIO_WRITE << MMIO_OPCODE_SHIFT) | - (get_ins_mem_width(instptr) << MMIO_WIDTH_SHIFT); - my_trace->rw.value = get_ins_imm_val(instptr); + my_trace->opcode = MMIO_WRITE; + my_trace->width = get_ins_mem_width(instptr); + my_trace->value = get_ins_imm_val(instptr); break; default: { unsigned char *ip = (unsigned char *)instptr; - my_trace->header.type |= - (MMIO_UNKNOWN_OP << MMIO_OPCODE_SHIFT); - my_trace->rw.value = (*ip) << 16 | *(ip + 1) << 8 | + my_trace->opcode = MMIO_UNKNOWN_OP; + my_trace->width = 0; + my_trace->value = (*ip) << 16 | *(ip + 1) << 8 | *(ip + 2); } } @@ -271,7 +254,7 @@ static void post(struct kmmio_probe *p, unsigned long condition, struct pt_regs *regs) { struct trap_reason *my_reason = &get_cpu_var(pf_reason); - struct mm_io_header_rw *my_trace = &get_cpu_var(cpu_trace); + struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); /* this should always return the active_trace count to 0 */ my_reason->active_traces--; @@ -282,20 +265,13 @@ static void post(struct kmmio_probe *p, unsigned long condition, switch (my_reason->type) { case REG_READ: - my_trace->rw.value = get_ins_reg_val(my_reason->ip, regs); + my_trace->value = get_ins_reg_val(my_reason->ip, regs); break; default: break; } - /* - * XXX: Several required values are ignored: - * - mapping id - * - program counter - * Also the address should be physical, not virtual. - */ - mmio_trace_record(my_trace->header.type, my_trace->rw.address, - my_trace->rw.value); + mmio_trace_rw(my_trace); put_cpu_var(cpu_trace); put_cpu_var(pf_reason); } @@ -305,21 +281,11 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, { static atomic_t next_id; struct remap_trace *trace = kmalloc(sizeof(*trace), GFP_KERNEL); - struct mm_io_header_map event = { - .header = { - .type = MMIO_MAGIC | - (MMIO_PROBE << MMIO_OPCODE_SHIFT), - .sec = 0, - .nsec = 0, - .pid = 0, - .data_len = sizeof(struct mm_io_map) - }, - .map = { - .phys = offset, - .addr = (unsigned long)addr, - .len = size, - .pc = 0 - } + struct mmiotrace_map map = { + .phys = offset, + .virt = (unsigned long)addr, + .len = size, + .opcode = MMIO_PROBE }; if (!trace) { @@ -338,15 +304,13 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, .phys = offset, .id = atomic_inc_return(&next_id) }; + map.map_id = trace->id; spin_lock_irq(&trace_lock); if (!is_enabled()) goto not_enabled; - /* - * XXX: Insufficient data recorded! - */ - mmio_trace_record(event.header.type, event.map.addr, event.map.len); + mmio_trace_mapping(&map); list_add_tail(&trace->list, &trace_list); if (!nommiotrace) register_kmmio_probe(&trace->probe); @@ -369,21 +333,11 @@ mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr) static void iounmap_trace_core(volatile void __iomem *addr) { - struct mm_io_header_map event = { - .header = { - .type = MMIO_MAGIC | - (MMIO_UNPROBE << MMIO_OPCODE_SHIFT), - .sec = 0, - .nsec = 0, - .pid = 0, - .data_len = sizeof(struct mm_io_map) - }, - .map = { - .phys = 0, - .addr = (unsigned long)addr, - .len = 0, - .pc = 0 - } + struct mmiotrace_map map = { + .phys = 0, + .virt = (unsigned long)addr, + .len = 0, + .opcode = MMIO_UNPROBE }; struct remap_trace *trace; struct remap_trace *tmp; @@ -404,8 +358,8 @@ static void iounmap_trace_core(volatile void __iomem *addr) break; } } - mmio_trace_record(event.header.type, event.map.addr, - found_trace ? found_trace->id : -1); + map.map_id = (found_trace) ? found_trace->id : -1; + mmio_trace_mapping(&map); not_enabled: spin_unlock_irq(&trace_lock); @@ -448,10 +402,12 @@ static void clear_trace_list(void) } } +#if 0 /* XXX: out of order */ static struct file_operations fops_marker = { .owner = THIS_MODULE, .write = write_marker }; +#endif void enable_mmiotrace(void) { @@ -464,9 +420,9 @@ void enable_mmiotrace(void) #if 0 /* XXX: tracing does not support text entries */ marker_file = debugfs_create_file("marker", 0660, dir, NULL, &fops_marker); -#endif if (!marker_file) pr_err(NAME "marker file creation failed.\n"); +#endif if (nommiotrace) pr_info(NAME "MMIO tracing disabled.\n"); @@ -502,17 +458,3 @@ void disable_mmiotrace(void) out: mutex_unlock(&mmiotrace_mutex); } - -int __init init_mmiotrace(void) -{ - pr_debug(NAME "load...\n"); - if (n_subbufs < 2) - return -EINVAL; - - dir = debugfs_create_dir(APP_DIR, NULL); - if (!dir) { - pr_err(NAME "Couldn't create relay app directory.\n"); - return -ENOMEM; - } - return 0; -} diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h index 579b3b06c90e..c88a9c197d22 100644 --- a/include/linux/mmiotrace.h +++ b/include/linux/mmiotrace.h @@ -54,73 +54,38 @@ static inline void mmiotrace_iounmap(volatile void __iomem *addr) } #endif /* CONFIG_MMIOTRACE_HOOKS */ -/* in kernel/trace/trace_mmiotrace.c */ -extern int __init init_mmiotrace(void); -extern void enable_mmiotrace(void); -extern void disable_mmiotrace(void); -extern void mmio_trace_record(u32 type, unsigned long addr, unsigned long arg); - -#endif /* __KERNEL__ */ - - -/* - * If you change anything here, you must bump MMIO_VERSION. - * This is the relay data format for user space. - */ -#define MMIO_VERSION 0x04 - -/* mm_io_header.type */ -#define MMIO_OPCODE_MASK 0xff -#define MMIO_OPCODE_SHIFT 0 -#define MMIO_WIDTH_MASK 0xff00 -#define MMIO_WIDTH_SHIFT 8 -#define MMIO_MAGIC (0x6f000000 | (MMIO_VERSION<<16)) -#define MMIO_MAGIC_MASK 0xffff0000 - -enum mm_io_opcode { /* payload type: */ - MMIO_READ = 0x1, /* struct mm_io_rw */ - MMIO_WRITE = 0x2, /* struct mm_io_rw */ - MMIO_PROBE = 0x3, /* struct mm_io_map */ - MMIO_UNPROBE = 0x4, /* struct mm_io_map */ +enum mm_io_opcode { + MMIO_READ = 0x1, /* struct mmiotrace_rw */ + MMIO_WRITE = 0x2, /* struct mmiotrace_rw */ + MMIO_PROBE = 0x3, /* struct mmiotrace_map */ + MMIO_UNPROBE = 0x4, /* struct mmiotrace_map */ MMIO_MARKER = 0x5, /* raw char data */ - MMIO_UNKNOWN_OP = 0x6, /* struct mm_io_rw */ + MMIO_UNKNOWN_OP = 0x6, /* struct mmiotrace_rw */ }; -struct mm_io_header { - __u32 type; /* see MMIO_* macros above */ - __u32 sec; /* timestamp */ - __u32 nsec; - __u32 pid; /* PID of the process, or 0 for kernel core */ - __u16 data_len; /* length of the following payload */ +struct mmiotrace_rw { + unsigned long phys; /* PCI address of register */ + unsigned long value; + unsigned long pc; /* optional program counter */ + int map_id; + unsigned char opcode; /* one of MMIO_{READ,WRITE,UNKNOWN_OP} */ + unsigned char width; /* size of register access in bytes */ }; -struct mm_io_rw { - __u64 address; /* virtual address of register */ - __u64 value; - __u64 pc; /* optional program counter */ +struct mmiotrace_map { + unsigned long phys; /* base address in PCI space */ + unsigned long virt; /* base virtual address */ + unsigned long len; /* mapping size */ + int map_id; + unsigned char opcode; /* MMIO_PROBE or MMIO_UNPROBE */ }; -struct mm_io_map { - __u64 phys; /* base address in PCI space */ - __u64 addr; /* base virtual address */ - __u64 len; /* mapping size */ - __u64 pc; /* optional program counter */ -}; - - -/* - * These structures are used to allow a single relay_write() - * call to write a full packet. - */ - -struct mm_io_header_rw { - struct mm_io_header header; - struct mm_io_rw rw; -} __attribute__((packed)); +/* in kernel/trace/trace_mmiotrace.c */ +extern void enable_mmiotrace(void); +extern void disable_mmiotrace(void); +extern void mmio_trace_rw(struct mmiotrace_rw *rw); +extern void mmio_trace_mapping(struct mmiotrace_map *map); -struct mm_io_header_map { - struct mm_io_header header; - struct mm_io_map map; -} __attribute__((packed)); +#endif /* __KERNEL__ */ #endif /* MMIOTRACE_H */ diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 3271916ff033..d14fe49e9638 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -831,6 +831,40 @@ ftrace(struct trace_array *tr, struct trace_array_cpu *data, trace_function(tr, data, ip, parent_ip, flags); } +#ifdef CONFIG_MMIOTRACE +void __trace_mmiotrace_rw(struct trace_array *tr, struct trace_array_cpu *data, + struct mmiotrace_rw *rw) +{ + struct trace_entry *entry; + unsigned long irq_flags; + + spin_lock_irqsave(&data->lock, irq_flags); + entry = tracing_get_trace_entry(tr, data); + tracing_generic_entry_update(entry, 0); + entry->type = TRACE_MMIO_RW; + entry->mmiorw = *rw; + spin_unlock_irqrestore(&data->lock, irq_flags); + + trace_wake_up(); +} + +void __trace_mmiotrace_map(struct trace_array *tr, struct trace_array_cpu *data, + struct mmiotrace_map *map) +{ + struct trace_entry *entry; + unsigned long irq_flags; + + spin_lock_irqsave(&data->lock, irq_flags); + entry = tracing_get_trace_entry(tr, data); + tracing_generic_entry_update(entry, 0); + entry->type = TRACE_MMIO_MAP; + entry->mmiomap = *map; + spin_unlock_irqrestore(&data->lock, irq_flags); + + trace_wake_up(); +} +#endif + void __trace_stack(struct trace_array *tr, struct trace_array_cpu *data, unsigned long flags, diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index c460e85e94ed..0ef9ef74c806 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -5,6 +5,7 @@ #include #include #include +#include enum trace_type { __TRACE_FIRST_TYPE = 0, @@ -14,6 +15,8 @@ enum trace_type { TRACE_WAKE, TRACE_STACK, TRACE_SPECIAL, + TRACE_MMIO_RW, + TRACE_MMIO_MAP, __TRACE_LAST_TYPE }; @@ -75,6 +78,8 @@ struct trace_entry { struct ctx_switch_entry ctx; struct special_entry special; struct stack_entry stack; + struct mmiotrace_rw mmiorw; + struct mmiotrace_map mmiomap; }; }; @@ -255,6 +260,15 @@ extern unsigned long ftrace_update_tot_cnt; extern int DYN_FTRACE_TEST_NAME(void); #endif +#ifdef CONFIG_MMIOTRACE +extern void __trace_mmiotrace_rw(struct trace_array *tr, + struct trace_array_cpu *data, + struct mmiotrace_rw *rw); +extern void __trace_mmiotrace_map(struct trace_array *tr, + struct trace_array_cpu *data, + struct mmiotrace_map *map); +#endif + #ifdef CONFIG_FTRACE_STARTUP_TEST #ifdef CONFIG_FTRACE extern int trace_selftest_startup_function(struct tracer *trace, diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c index e4dd03cc5aa6..3a12b1ad0c63 100644 --- a/kernel/trace/trace_mmiotrace.c +++ b/kernel/trace/trace_mmiotrace.c @@ -11,19 +11,26 @@ #include "trace.h" -extern void -__trace_special(void *__tr, void *__data, - unsigned long arg1, unsigned long arg2, unsigned long arg3); - static struct trace_array *mmio_trace_array; +static void mmio_reset_data(struct trace_array *tr) +{ + int cpu; + + tr->time_start = ftrace_now(tr->cpu); + + for_each_online_cpu(cpu) + tracing_reset(tr->data[cpu]); +} static void mmio_trace_init(struct trace_array *tr) { pr_debug("in %s\n", __func__); mmio_trace_array = tr; - if (tr->ctrl) + if (tr->ctrl) { + mmio_reset_data(tr); enable_mmiotrace(); + } } static void mmio_trace_reset(struct trace_array *tr) @@ -31,15 +38,110 @@ static void mmio_trace_reset(struct trace_array *tr) pr_debug("in %s\n", __func__); if (tr->ctrl) disable_mmiotrace(); + mmio_reset_data(tr); + mmio_trace_array = NULL; } static void mmio_trace_ctrl_update(struct trace_array *tr) { pr_debug("in %s\n", __func__); - if (tr->ctrl) + if (tr->ctrl) { + mmio_reset_data(tr); enable_mmiotrace(); - else + } else { disable_mmiotrace(); + } +} + +/* XXX: This is not called for trace_pipe file! */ +void mmio_print_header(struct trace_iterator *iter) +{ + struct trace_seq *s = &iter->seq; + trace_seq_printf(s, "VERSION broken 20070824\n"); + /* TODO: print /proc/bus/pci/devices contents as PCIDEV lines */ +} + +static int mmio_print_rw(struct trace_iterator *iter) +{ + struct trace_entry *entry = iter->ent; + struct mmiotrace_rw *rw = &entry->mmiorw; + struct trace_seq *s = &iter->seq; + unsigned long long t = ns2usecs(entry->t); + unsigned long usec_rem = do_div(t, 1000000ULL); + unsigned secs = (unsigned long)t; + int ret = 1; + + switch (entry->mmiorw.opcode) { + case MMIO_READ: + ret = trace_seq_printf(s, + "R %d %lu.%06lu %d 0x%lx 0x%lx 0x%lx %d\n", + rw->width, secs, usec_rem, rw->map_id, rw->phys, + rw->value, rw->pc, entry->pid); + break; + case MMIO_WRITE: + ret = trace_seq_printf(s, + "W %d %lu.%06lu %d 0x%lx 0x%lx 0x%lx %d\n", + rw->width, secs, usec_rem, rw->map_id, rw->phys, + rw->value, rw->pc, entry->pid); + break; + case MMIO_UNKNOWN_OP: + ret = trace_seq_printf(s, + "UNKNOWN %lu.%06lu %d 0x%lx %02x,%02x,%02x 0x%lx %d\n", + secs, usec_rem, rw->map_id, rw->phys, + (rw->value >> 16) & 0xff, (rw->value >> 8) & 0xff, + (rw->value >> 0) & 0xff, rw->pc, entry->pid); + break; + default: + ret = trace_seq_printf(s, "rw what?\n"); + break; + } + if (ret) + return 1; + return 0; +} + +static int mmio_print_map(struct trace_iterator *iter) +{ + struct trace_entry *entry = iter->ent; + struct mmiotrace_map *m = &entry->mmiomap; + struct trace_seq *s = &iter->seq; + unsigned long long t = ns2usecs(entry->t); + unsigned long usec_rem = do_div(t, 1000000ULL); + unsigned secs = (unsigned long)t; + int ret = 1; + + switch (entry->mmiorw.opcode) { + case MMIO_PROBE: + ret = trace_seq_printf(s, + "MAP %lu.%06lu %d 0x%lx 0x%lx 0x%lx 0x%lx %d\n", + secs, usec_rem, m->map_id, m->phys, m->virt, m->len, + 0UL, entry->pid); + break; + case MMIO_UNPROBE: + ret = trace_seq_printf(s, + "UNMAP %lu.%06lu %d 0x%lx %d\n", + secs, usec_rem, m->map_id, 0UL, entry->pid); + break; + default: + ret = trace_seq_printf(s, "map what?\n"); + break; + } + if (ret) + return 1; + return 0; +} + +/* return 0 to abort printing without consuming current entry in pipe mode */ +static int mmio_print_line(struct trace_iterator *iter) +{ + switch (iter->ent->type) { + case TRACE_MMIO_RW: + return mmio_print_rw(iter); + case TRACE_MMIO_MAP: + return mmio_print_map(iter); + default: + return 1; /* ignore unknown entries */ + } } static struct tracer mmio_tracer __read_mostly = @@ -47,38 +149,31 @@ static struct tracer mmio_tracer __read_mostly = .name = "mmiotrace", .init = mmio_trace_init, .reset = mmio_trace_reset, + .open = mmio_print_header, .ctrl_update = mmio_trace_ctrl_update, + .print_line = mmio_print_line, }; __init static int init_mmio_trace(void) { - int ret = init_mmiotrace(); - if (ret) - return ret; return register_tracer(&mmio_tracer); } device_initcall(init_mmio_trace); -void mmio_trace_record(u32 type, unsigned long addr, unsigned long arg) +void mmio_trace_rw(struct mmiotrace_rw *rw) { struct trace_array *tr = mmio_trace_array; struct trace_array_cpu *data = tr->data[smp_processor_id()]; + __trace_mmiotrace_rw(tr, data, rw); +} - if (!current || current->pid == 0) { - /* - * XXX: This is a problem. We need to able to record, no - * matter what. tracing_generic_entry_update() would crash. - */ - static unsigned limit; - if (limit++ < 12) - pr_err("Error in %s: no current.\n", __func__); - return; - } - if (!tr || !data) { - static unsigned limit; - if (limit++ < 12) - pr_err("%s: no tr or data\n", __func__); - return; - } - __trace_special(tr, data, type, addr, arg); +void mmio_trace_mapping(struct mmiotrace_map *map) +{ + struct trace_array *tr = mmio_trace_array; + struct trace_array_cpu *data; + + preempt_disable(); + data = tr->data[smp_processor_id()]; + __trace_mmiotrace_map(tr, data, map); + preempt_enable(); } -- cgit v1.2.3 From 138295373ccf7625fcb0218dfea114837983bc39 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:58 +0200 Subject: ftrace: mmiotrace update, #2 another weekend, another patch. This should apply on top of my previous patch from March 23rd. Summary of changes: - Print PCI device list in output header - work around recursive probe hits on SMP - refactor dis/arm_kmmio_fault_page() and add check for page levels - remove un/reference_kmmio(), the die notifier hook is registered permanently into the list - explicitly check for single stepping in die notifier callback I have tested this version on my UP Athlon64 desktop with Nouveau, and SMP Core 2 Duo laptop with the proprietary nvidia driver. Both systems are 64-bit. One previously unknown bug crept into daylight: the ftrace framework's output routines print the first entry last after buffer has wrapped around. The most important regressions compared to non-ftrace mmiotrace at this time are: - failure of trace_pipe file - illegal lines in output file - unaware of losing data due to buffer full Personally I'd like to see these three solved before submitting to mainline. Other issues may come up once we know when we lose events. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mmiotrace/kmmio.c | 186 ++++++++++++++--------------------- arch/x86/kernel/mmiotrace/mmio-mod.c | 3 - include/linux/mmiotrace.h | 2 - kernel/trace/trace_mmiotrace.c | 47 ++++++++- 4 files changed, 120 insertions(+), 118 deletions(-) diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index efb467933087..cd0d95fe4fe6 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -5,15 +5,12 @@ * 2008 Pekka Paalanen */ -#include #include #include #include #include #include -#include #include -#include #include #include #include @@ -22,10 +19,9 @@ #include #include #include -#include #include -#include - +#include +#include #include #define KMMIO_PAGE_HASH_BITS 4 @@ -57,14 +53,9 @@ struct kmmio_context { int active; }; -static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, - void *args); - -static DEFINE_MUTEX(kmmio_init_mutex); static DEFINE_SPINLOCK(kmmio_lock); -/* These are protected by kmmio_lock */ -static int kmmio_initialized; +/* Protected by kmmio_lock */ unsigned int kmmio_count; /* Read-protected by RCU, write-protected by kmmio_lock. */ @@ -79,60 +70,6 @@ static struct list_head *kmmio_page_list(unsigned long page) /* Accessed per-cpu */ static DEFINE_PER_CPU(struct kmmio_context, kmmio_ctx); -/* protected by kmmio_init_mutex */ -static struct notifier_block nb_die = { - .notifier_call = kmmio_die_notifier -}; - -/** - * Makes sure kmmio is initialized and usable. - * This must be called before any other kmmio function defined here. - * May sleep. - */ -void reference_kmmio(void) -{ - mutex_lock(&kmmio_init_mutex); - spin_lock_irq(&kmmio_lock); - if (!kmmio_initialized) { - int i; - for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) - INIT_LIST_HEAD(&kmmio_page_table[i]); - if (register_die_notifier(&nb_die)) - BUG(); - } - kmmio_initialized++; - spin_unlock_irq(&kmmio_lock); - mutex_unlock(&kmmio_init_mutex); -} -EXPORT_SYMBOL_GPL(reference_kmmio); - -/** - * Clean up kmmio after use. This must be called for every call to - * reference_kmmio(). All probes registered after the corresponding - * reference_kmmio() must have been unregistered when calling this. - * May sleep. - */ -void unreference_kmmio(void) -{ - bool unreg = false; - - mutex_lock(&kmmio_init_mutex); - spin_lock_irq(&kmmio_lock); - - if (kmmio_initialized == 1) { - BUG_ON(is_kmmio_active()); - unreg = true; - } - kmmio_initialized--; - BUG_ON(kmmio_initialized < 0); - spin_unlock_irq(&kmmio_lock); - - if (unreg) - unregister_die_notifier(&nb_die); /* calls sync_rcu() */ - mutex_unlock(&kmmio_init_mutex); -} -EXPORT_SYMBOL(unreference_kmmio); - /* * this is basically a dynamic stabbing problem: * Could use the existing prio tree code or @@ -167,58 +104,56 @@ static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) return NULL; } -/** Mark the given page as not present. Access to it will trigger a fault. */ -static void arm_kmmio_fault_page(unsigned long page, int *page_level) +static void set_page_present(unsigned long addr, bool present, int *pglevel) { - unsigned long address = page & PAGE_MASK; + pteval_t pteval; + pmdval_t pmdval; int level; - pte_t *pte = lookup_address(address, &level); + pmd_t *pmd; + pte_t *pte = lookup_address(addr, &level); if (!pte) { - pr_err("kmmio: Error in %s: no pte for page 0x%08lx\n", - __func__, page); + pr_err("kmmio: no pte for page 0x%08lx\n", addr); return; } - if (level == PG_LEVEL_2M) { - pmd_t *pmd = (pmd_t *)pte; - set_pmd(pmd, __pmd(pmd_val(*pmd) & ~_PAGE_PRESENT)); - } else { - /* PG_LEVEL_4K */ - set_pte(pte, __pte(pte_val(*pte) & ~_PAGE_PRESENT)); + if (pglevel) + *pglevel = level; + + switch (level) { + case PG_LEVEL_2M: + pmd = (pmd_t *)pte; + pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT; + if (present) + pmdval |= _PAGE_PRESENT; + set_pmd(pmd, __pmd(pmdval)); + break; + + case PG_LEVEL_4K: + pteval = pte_val(*pte) & ~_PAGE_PRESENT; + if (present) + pteval |= _PAGE_PRESENT; + set_pte_atomic(pte, __pte(pteval)); + break; + + default: + pr_err("kmmio: unexpected page level 0x%x.\n", level); + return; } - if (page_level) - *page_level = level; + __flush_tlb_one(addr); +} - __flush_tlb_one(page); +/** Mark the given page as not present. Access to it will trigger a fault. */ +static void arm_kmmio_fault_page(unsigned long page, int *page_level) +{ + set_page_present(page & PAGE_MASK, false, page_level); } /** Mark the given page as present. */ static void disarm_kmmio_fault_page(unsigned long page, int *page_level) { - unsigned long address = page & PAGE_MASK; - int level; - pte_t *pte = lookup_address(address, &level); - - if (!pte) { - pr_err("kmmio: Error in %s: no pte for page 0x%08lx\n", - __func__, page); - return; - } - - if (level == PG_LEVEL_2M) { - pmd_t *pmd = (pmd_t *)pte; - set_pmd(pmd, __pmd(pmd_val(*pmd) | _PAGE_PRESENT)); - } else { - /* PG_LEVEL_4K */ - set_pte(pte, __pte(pte_val(*pte) | _PAGE_PRESENT)); - } - - if (page_level) - *page_level = level; - - __flush_tlb_one(page); + set_page_present(page & PAGE_MASK, true, page_level); } /* @@ -240,6 +175,7 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) { struct kmmio_context *ctx; struct kmmio_fault_page *faultpage; + int ret = 0; /* default to fault not handled */ /* * Preemption is now disabled to prevent process switch during @@ -257,21 +193,35 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) /* * Either this page fault is not caused by kmmio, or * another CPU just pulled the kmmio probe from under - * our feet. In the latter case all hell breaks loose. + * our feet. The latter case should not be possible. */ goto no_kmmio; } ctx = &get_cpu_var(kmmio_ctx); if (ctx->active) { + disarm_kmmio_fault_page(faultpage->page, NULL); + if (addr == ctx->addr) { + /* + * On SMP we sometimes get recursive probe hits on the + * same address. Context is already saved, fall out. + */ + pr_debug("kmmio: duplicate probe hit on CPU %d, for " + "address 0x%08lx.\n", + smp_processor_id(), addr); + ret = 1; + goto no_kmmio_ctx; + } /* * Prevent overwriting already in-flight context. - * If this page fault really was due to kmmio trap, - * all hell breaks loose. + * This should not happen, let's hope disarming at least + * prevents a panic. */ pr_emerg("kmmio: recursive probe hit on CPU %d, " "for address 0x%08lx. Ignoring.\n", smp_processor_id(), addr); + pr_emerg("kmmio: previous hit was at 0x%08lx.\n", + ctx->addr); goto no_kmmio_ctx; } ctx->active++; @@ -302,14 +252,14 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) */ put_cpu_var(kmmio_ctx); - return 1; + return 1; /* fault handled */ no_kmmio_ctx: put_cpu_var(kmmio_ctx); no_kmmio: rcu_read_unlock(); preempt_enable_no_resched(); - return 0; /* page fault not handled by kmmio */ + return ret; } /* @@ -322,8 +272,11 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) int ret = 0; struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); - if (!ctx->active) + if (!ctx->active) { + pr_debug("kmmio: spurious debug trap on CPU %d.\n", + smp_processor_id()); goto out; + } if (ctx->probe && ctx->probe->post_handler) ctx->probe->post_handler(ctx->probe, condition, regs); @@ -525,9 +478,22 @@ static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, { struct die_args *arg = args; - if (val == DIE_DEBUG) + if (val == DIE_DEBUG && (arg->err & DR_STEP)) if (post_kmmio_handler(arg->err, arg->regs) == 1) return NOTIFY_STOP; return NOTIFY_DONE; } + +static struct notifier_block nb_die = { + .notifier_call = kmmio_die_notifier +}; + +static int __init init_kmmio(void) +{ + int i; + for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) + INIT_LIST_HEAD(&kmmio_page_table[i]); + return register_die_notifier(&nb_die); +} +fs_initcall(init_kmmio); /* should be before device_initcall() */ diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c index 62abc281a512..8256546d49bf 100644 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ b/arch/x86/kernel/mmiotrace/mmio-mod.c @@ -415,8 +415,6 @@ void enable_mmiotrace(void) if (is_enabled()) goto out; - reference_kmmio(); - #if 0 /* XXX: tracing does not support text entries */ marker_file = debugfs_create_file("marker", 0660, dir, NULL, &fops_marker); @@ -448,7 +446,6 @@ void disable_mmiotrace(void) spin_unlock_irq(&trace_lock); clear_trace_list(); /* guarantees: no more kmmio callbacks */ - unreference_kmmio(); if (marker_file) { debugfs_remove(marker_file); marker_file = NULL; diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h index c88a9c197d22..dd6b64b160fc 100644 --- a/include/linux/mmiotrace.h +++ b/include/linux/mmiotrace.h @@ -31,8 +31,6 @@ static inline int is_kmmio_active(void) return kmmio_count; } -extern void reference_kmmio(void); -extern void unreference_kmmio(void); extern int register_kmmio_probe(struct kmmio_probe *p); extern void unregister_kmmio_probe(struct kmmio_probe *p); diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c index 3a12b1ad0c63..361472b5788c 100644 --- a/kernel/trace/trace_mmiotrace.c +++ b/kernel/trace/trace_mmiotrace.c @@ -8,6 +8,7 @@ #include #include +#include #include "trace.h" @@ -53,12 +54,52 @@ static void mmio_trace_ctrl_update(struct trace_array *tr) } } +static int mmio_print_pcidev(struct trace_seq *s, const struct pci_dev *dev) +{ + int ret = 0; + int i; + resource_size_t start, end; + const struct pci_driver *drv = pci_dev_driver(dev); + + /* XXX: incomplete checks for trace_seq_printf() return value */ + ret += trace_seq_printf(s, "PCIDEV %02x%02x %04x%04x %x", + dev->bus->number, dev->devfn, + dev->vendor, dev->device, dev->irq); + /* + * XXX: is pci_resource_to_user() appropriate, since we are + * supposed to interpret the __ioremap() phys_addr argument based on + * these printed values? + */ + for (i = 0; i < 7; i++) { + pci_resource_to_user(dev, i, &dev->resource[i], &start, &end); + ret += trace_seq_printf(s, " %llx", + (unsigned long long)(start | + (dev->resource[i].flags & PCI_REGION_FLAG_MASK))); + } + for (i = 0; i < 7; i++) { + pci_resource_to_user(dev, i, &dev->resource[i], &start, &end); + ret += trace_seq_printf(s, " %llx", + dev->resource[i].start < dev->resource[i].end ? + (unsigned long long)(end - start) + 1 : 0); + } + if (drv) + ret += trace_seq_printf(s, " %s\n", drv->name); + else + ret += trace_seq_printf(s, " \n"); + return ret; +} + /* XXX: This is not called for trace_pipe file! */ -void mmio_print_header(struct trace_iterator *iter) +static void mmio_print_header(struct trace_iterator *iter) { struct trace_seq *s = &iter->seq; - trace_seq_printf(s, "VERSION broken 20070824\n"); - /* TODO: print /proc/bus/pci/devices contents as PCIDEV lines */ + struct pci_dev *dev = NULL; + + trace_seq_printf(s, "VERSION 20070824\n"); + + for_each_pci_dev(dev) + mmio_print_pcidev(s, dev); + /* XXX: return value? What if header is very long? */ } static int mmio_print_rw(struct trace_iterator *iter) -- cgit v1.2.3 From 801a175bf601f9a9d5e86e92dee9adeeb6625da8 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:58 +0200 Subject: mmiotrace: ftrace fix Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index d14fe49e9638..4dcc4e85c5d6 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -838,12 +838,16 @@ void __trace_mmiotrace_rw(struct trace_array *tr, struct trace_array_cpu *data, struct trace_entry *entry; unsigned long irq_flags; - spin_lock_irqsave(&data->lock, irq_flags); + raw_local_irq_save(irq_flags); + __raw_spin_lock(&data->lock); + entry = tracing_get_trace_entry(tr, data); tracing_generic_entry_update(entry, 0); entry->type = TRACE_MMIO_RW; entry->mmiorw = *rw; - spin_unlock_irqrestore(&data->lock, irq_flags); + + __raw_spin_unlock(&data->lock); + raw_local_irq_restore(irq_flags); trace_wake_up(); } @@ -854,12 +858,16 @@ void __trace_mmiotrace_map(struct trace_array *tr, struct trace_array_cpu *data, struct trace_entry *entry; unsigned long irq_flags; - spin_lock_irqsave(&data->lock, irq_flags); + raw_local_irq_save(irq_flags); + __raw_spin_lock(&data->lock); + entry = tracing_get_trace_entry(tr, data); tracing_generic_entry_update(entry, 0); entry->type = TRACE_MMIO_MAP; entry->mmiomap = *map; - spin_unlock_irqrestore(&data->lock, irq_flags); + + __raw_spin_unlock(&data->lock); + raw_local_irq_restore(irq_flags); trace_wake_up(); } -- cgit v1.2.3 From 49023168261a7f9a2fd4a1ca1adbfea922556015 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:20:58 +0200 Subject: mmiotrace: cleanup Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mmiotrace/kmmio.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c index cd0d95fe4fe6..3ad27b8504a5 100644 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ b/arch/x86/kernel/mmiotrace/kmmio.c @@ -228,7 +228,7 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) ctx->fpage = faultpage; ctx->probe = get_kmmio_probe(addr); - ctx->saved_flags = (regs->flags & (TF_MASK|IF_MASK)); + ctx->saved_flags = (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF)); ctx->addr = addr; if (ctx->probe && ctx->probe->pre_handler) @@ -238,8 +238,8 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) * Enable single-stepping and disable interrupts for the faulting * context. Local interrupts must not get enabled during stepping. */ - regs->flags |= TF_MASK; - regs->flags &= ~IF_MASK; + regs->flags |= X86_EFLAGS_TF; + regs->flags &= ~X86_EFLAGS_IF; /* Now we set present bit in PTE and single step. */ disarm_kmmio_fault_page(ctx->fpage->page, NULL); @@ -283,7 +283,7 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) arm_kmmio_fault_page(ctx->fpage->page, NULL); - regs->flags &= ~TF_MASK; + regs->flags &= ~X86_EFLAGS_TF; regs->flags |= ctx->saved_flags; /* These were acquired in kmmio_handler(). */ @@ -297,7 +297,7 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) * will have TF set, in which case, continue the remaining processing * of do_debug, as if this is not a probe hit. */ - if (!(regs->flags & TF_MASK)) + if (!(regs->flags & X86_EFLAGS_TF)) ret = 1; out: put_cpu_var(kmmio_ctx); -- cgit v1.2.3 From ff3a3e9ba5e4273a8bc10570adab4a390fb90757 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:59 +0200 Subject: x86 mmiotrace: move files into arch/x86/mm/. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 2 - arch/x86/kernel/mmiotrace/Makefile | 4 - arch/x86/kernel/mmiotrace/kmmio.c | 499 ------------------------------ arch/x86/kernel/mmiotrace/mmio-mod.c | 457 --------------------------- arch/x86/kernel/mmiotrace/pf_in.c | 489 ----------------------------- arch/x86/kernel/mmiotrace/pf_in.h | 39 --- arch/x86/kernel/mmiotrace/testmmiotrace.c | 71 ----- arch/x86/mm/Makefile | 5 + arch/x86/mm/kmmio.c | 499 ++++++++++++++++++++++++++++++ arch/x86/mm/mmio-mod.c | 457 +++++++++++++++++++++++++++ arch/x86/mm/pf_in.c | 489 +++++++++++++++++++++++++++++ arch/x86/mm/pf_in.h | 39 +++ arch/x86/mm/testmmiotrace.c | 71 +++++ 13 files changed, 1560 insertions(+), 1561 deletions(-) delete mode 100644 arch/x86/kernel/mmiotrace/Makefile delete mode 100644 arch/x86/kernel/mmiotrace/kmmio.c delete mode 100644 arch/x86/kernel/mmiotrace/mmio-mod.c delete mode 100644 arch/x86/kernel/mmiotrace/pf_in.c delete mode 100644 arch/x86/kernel/mmiotrace/pf_in.h delete mode 100644 arch/x86/kernel/mmiotrace/testmmiotrace.c create mode 100644 arch/x86/mm/kmmio.c create mode 100644 arch/x86/mm/mmio-mod.c create mode 100644 arch/x86/mm/pf_in.c create mode 100644 arch/x86/mm/pf_in.h create mode 100644 arch/x86/mm/testmmiotrace.c diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index a51ac153685e..739d49acd2f1 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -79,8 +79,6 @@ obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_MMIOTRACE) += mmiotrace/ - obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_K8_NB) += k8.o diff --git a/arch/x86/kernel/mmiotrace/Makefile b/arch/x86/kernel/mmiotrace/Makefile deleted file mode 100644 index dbcd8d50fb8d..000000000000 --- a/arch/x86/kernel/mmiotrace/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -obj-$(CONFIG_MMIOTRACE_HOOKS) += kmmio.o -obj-$(CONFIG_MMIOTRACE) += mmiotrace.o -mmiotrace-y := pf_in.o mmio-mod.o -obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o diff --git a/arch/x86/kernel/mmiotrace/kmmio.c b/arch/x86/kernel/mmiotrace/kmmio.c deleted file mode 100644 index 3ad27b8504a5..000000000000 --- a/arch/x86/kernel/mmiotrace/kmmio.c +++ /dev/null @@ -1,499 +0,0 @@ -/* Support for MMIO probes. - * Benfit many code from kprobes - * (C) 2002 Louis Zhuang . - * 2007 Alexander Eichner - * 2008 Pekka Paalanen - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define KMMIO_PAGE_HASH_BITS 4 -#define KMMIO_PAGE_TABLE_SIZE (1 << KMMIO_PAGE_HASH_BITS) - -struct kmmio_fault_page { - struct list_head list; - struct kmmio_fault_page *release_next; - unsigned long page; /* location of the fault page */ - - /* - * Number of times this page has been registered as a part - * of a probe. If zero, page is disarmed and this may be freed. - * Used only by writers (RCU). - */ - int count; -}; - -struct kmmio_delayed_release { - struct rcu_head rcu; - struct kmmio_fault_page *release_list; -}; - -struct kmmio_context { - struct kmmio_fault_page *fpage; - struct kmmio_probe *probe; - unsigned long saved_flags; - unsigned long addr; - int active; -}; - -static DEFINE_SPINLOCK(kmmio_lock); - -/* Protected by kmmio_lock */ -unsigned int kmmio_count; - -/* Read-protected by RCU, write-protected by kmmio_lock. */ -static struct list_head kmmio_page_table[KMMIO_PAGE_TABLE_SIZE]; -static LIST_HEAD(kmmio_probes); - -static struct list_head *kmmio_page_list(unsigned long page) -{ - return &kmmio_page_table[hash_long(page, KMMIO_PAGE_HASH_BITS)]; -} - -/* Accessed per-cpu */ -static DEFINE_PER_CPU(struct kmmio_context, kmmio_ctx); - -/* - * this is basically a dynamic stabbing problem: - * Could use the existing prio tree code or - * Possible better implementations: - * The Interval Skip List: A Data Structure for Finding All Intervals That - * Overlap a Point (might be simple) - * Space Efficient Dynamic Stabbing with Fast Queries - Mikkel Thorup - */ -/* Get the kmmio at this addr (if any). You must be holding RCU read lock. */ -static struct kmmio_probe *get_kmmio_probe(unsigned long addr) -{ - struct kmmio_probe *p; - list_for_each_entry_rcu(p, &kmmio_probes, list) { - if (addr >= p->addr && addr <= (p->addr + p->len)) - return p; - } - return NULL; -} - -/* You must be holding RCU read lock. */ -static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) -{ - struct list_head *head; - struct kmmio_fault_page *p; - - page &= PAGE_MASK; - head = kmmio_page_list(page); - list_for_each_entry_rcu(p, head, list) { - if (p->page == page) - return p; - } - return NULL; -} - -static void set_page_present(unsigned long addr, bool present, int *pglevel) -{ - pteval_t pteval; - pmdval_t pmdval; - int level; - pmd_t *pmd; - pte_t *pte = lookup_address(addr, &level); - - if (!pte) { - pr_err("kmmio: no pte for page 0x%08lx\n", addr); - return; - } - - if (pglevel) - *pglevel = level; - - switch (level) { - case PG_LEVEL_2M: - pmd = (pmd_t *)pte; - pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT; - if (present) - pmdval |= _PAGE_PRESENT; - set_pmd(pmd, __pmd(pmdval)); - break; - - case PG_LEVEL_4K: - pteval = pte_val(*pte) & ~_PAGE_PRESENT; - if (present) - pteval |= _PAGE_PRESENT; - set_pte_atomic(pte, __pte(pteval)); - break; - - default: - pr_err("kmmio: unexpected page level 0x%x.\n", level); - return; - } - - __flush_tlb_one(addr); -} - -/** Mark the given page as not present. Access to it will trigger a fault. */ -static void arm_kmmio_fault_page(unsigned long page, int *page_level) -{ - set_page_present(page & PAGE_MASK, false, page_level); -} - -/** Mark the given page as present. */ -static void disarm_kmmio_fault_page(unsigned long page, int *page_level) -{ - set_page_present(page & PAGE_MASK, true, page_level); -} - -/* - * This is being called from do_page_fault(). - * - * We may be in an interrupt or a critical section. Also prefecthing may - * trigger a page fault. We may be in the middle of process switch. - * We cannot take any locks, because we could be executing especially - * within a kmmio critical section. - * - * Local interrupts are disabled, so preemption cannot happen. - * Do not enable interrupts, do not sleep, and watch out for other CPUs. - */ -/* - * Interrupts are disabled on entry as trap3 is an interrupt gate - * and they remain disabled thorough out this function. - */ -int kmmio_handler(struct pt_regs *regs, unsigned long addr) -{ - struct kmmio_context *ctx; - struct kmmio_fault_page *faultpage; - int ret = 0; /* default to fault not handled */ - - /* - * Preemption is now disabled to prevent process switch during - * single stepping. We can only handle one active kmmio trace - * per cpu, so ensure that we finish it before something else - * gets to run. We also hold the RCU read lock over single - * stepping to avoid looking up the probe and kmmio_fault_page - * again. - */ - preempt_disable(); - rcu_read_lock(); - - faultpage = get_kmmio_fault_page(addr); - if (!faultpage) { - /* - * Either this page fault is not caused by kmmio, or - * another CPU just pulled the kmmio probe from under - * our feet. The latter case should not be possible. - */ - goto no_kmmio; - } - - ctx = &get_cpu_var(kmmio_ctx); - if (ctx->active) { - disarm_kmmio_fault_page(faultpage->page, NULL); - if (addr == ctx->addr) { - /* - * On SMP we sometimes get recursive probe hits on the - * same address. Context is already saved, fall out. - */ - pr_debug("kmmio: duplicate probe hit on CPU %d, for " - "address 0x%08lx.\n", - smp_processor_id(), addr); - ret = 1; - goto no_kmmio_ctx; - } - /* - * Prevent overwriting already in-flight context. - * This should not happen, let's hope disarming at least - * prevents a panic. - */ - pr_emerg("kmmio: recursive probe hit on CPU %d, " - "for address 0x%08lx. Ignoring.\n", - smp_processor_id(), addr); - pr_emerg("kmmio: previous hit was at 0x%08lx.\n", - ctx->addr); - goto no_kmmio_ctx; - } - ctx->active++; - - ctx->fpage = faultpage; - ctx->probe = get_kmmio_probe(addr); - ctx->saved_flags = (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF)); - ctx->addr = addr; - - if (ctx->probe && ctx->probe->pre_handler) - ctx->probe->pre_handler(ctx->probe, regs, addr); - - /* - * Enable single-stepping and disable interrupts for the faulting - * context. Local interrupts must not get enabled during stepping. - */ - regs->flags |= X86_EFLAGS_TF; - regs->flags &= ~X86_EFLAGS_IF; - - /* Now we set present bit in PTE and single step. */ - disarm_kmmio_fault_page(ctx->fpage->page, NULL); - - /* - * If another cpu accesses the same page while we are stepping, - * the access will not be caught. It will simply succeed and the - * only downside is we lose the event. If this becomes a problem, - * the user should drop to single cpu before tracing. - */ - - put_cpu_var(kmmio_ctx); - return 1; /* fault handled */ - -no_kmmio_ctx: - put_cpu_var(kmmio_ctx); -no_kmmio: - rcu_read_unlock(); - preempt_enable_no_resched(); - return ret; -} - -/* - * Interrupts are disabled on entry as trap1 is an interrupt gate - * and they remain disabled thorough out this function. - * This must always get called as the pair to kmmio_handler(). - */ -static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) -{ - int ret = 0; - struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); - - if (!ctx->active) { - pr_debug("kmmio: spurious debug trap on CPU %d.\n", - smp_processor_id()); - goto out; - } - - if (ctx->probe && ctx->probe->post_handler) - ctx->probe->post_handler(ctx->probe, condition, regs); - - arm_kmmio_fault_page(ctx->fpage->page, NULL); - - regs->flags &= ~X86_EFLAGS_TF; - regs->flags |= ctx->saved_flags; - - /* These were acquired in kmmio_handler(). */ - ctx->active--; - BUG_ON(ctx->active); - rcu_read_unlock(); - preempt_enable_no_resched(); - - /* - * if somebody else is singlestepping across a probe point, flags - * will have TF set, in which case, continue the remaining processing - * of do_debug, as if this is not a probe hit. - */ - if (!(regs->flags & X86_EFLAGS_TF)) - ret = 1; -out: - put_cpu_var(kmmio_ctx); - return ret; -} - -/* You must be holding kmmio_lock. */ -static int add_kmmio_fault_page(unsigned long page) -{ - struct kmmio_fault_page *f; - - page &= PAGE_MASK; - f = get_kmmio_fault_page(page); - if (f) { - if (!f->count) - arm_kmmio_fault_page(f->page, NULL); - f->count++; - return 0; - } - - f = kmalloc(sizeof(*f), GFP_ATOMIC); - if (!f) - return -1; - - f->count = 1; - f->page = page; - list_add_rcu(&f->list, kmmio_page_list(f->page)); - - arm_kmmio_fault_page(f->page, NULL); - - return 0; -} - -/* You must be holding kmmio_lock. */ -static void release_kmmio_fault_page(unsigned long page, - struct kmmio_fault_page **release_list) -{ - struct kmmio_fault_page *f; - - page &= PAGE_MASK; - f = get_kmmio_fault_page(page); - if (!f) - return; - - f->count--; - BUG_ON(f->count < 0); - if (!f->count) { - disarm_kmmio_fault_page(f->page, NULL); - f->release_next = *release_list; - *release_list = f; - } -} - -int register_kmmio_probe(struct kmmio_probe *p) -{ - unsigned long flags; - int ret = 0; - unsigned long size = 0; - - spin_lock_irqsave(&kmmio_lock, flags); - if (get_kmmio_probe(p->addr)) { - ret = -EEXIST; - goto out; - } - kmmio_count++; - list_add_rcu(&p->list, &kmmio_probes); - while (size < p->len) { - if (add_kmmio_fault_page(p->addr + size)) - pr_err("kmmio: Unable to set page fault.\n"); - size += PAGE_SIZE; - } -out: - spin_unlock_irqrestore(&kmmio_lock, flags); - /* - * XXX: What should I do here? - * Here was a call to global_flush_tlb(), but it does not exist - * anymore. It seems it's not needed after all. - */ - return ret; -} -EXPORT_SYMBOL(register_kmmio_probe); - -static void rcu_free_kmmio_fault_pages(struct rcu_head *head) -{ - struct kmmio_delayed_release *dr = container_of( - head, - struct kmmio_delayed_release, - rcu); - struct kmmio_fault_page *p = dr->release_list; - while (p) { - struct kmmio_fault_page *next = p->release_next; - BUG_ON(p->count); - kfree(p); - p = next; - } - kfree(dr); -} - -static void remove_kmmio_fault_pages(struct rcu_head *head) -{ - struct kmmio_delayed_release *dr = container_of( - head, - struct kmmio_delayed_release, - rcu); - struct kmmio_fault_page *p = dr->release_list; - struct kmmio_fault_page **prevp = &dr->release_list; - unsigned long flags; - spin_lock_irqsave(&kmmio_lock, flags); - while (p) { - if (!p->count) - list_del_rcu(&p->list); - else - *prevp = p->release_next; - prevp = &p->release_next; - p = p->release_next; - } - spin_unlock_irqrestore(&kmmio_lock, flags); - /* This is the real RCU destroy call. */ - call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages); -} - -/* - * Remove a kmmio probe. You have to synchronize_rcu() before you can be - * sure that the callbacks will not be called anymore. Only after that - * you may actually release your struct kmmio_probe. - * - * Unregistering a kmmio fault page has three steps: - * 1. release_kmmio_fault_page() - * Disarm the page, wait a grace period to let all faults finish. - * 2. remove_kmmio_fault_pages() - * Remove the pages from kmmio_page_table. - * 3. rcu_free_kmmio_fault_pages() - * Actally free the kmmio_fault_page structs as with RCU. - */ -void unregister_kmmio_probe(struct kmmio_probe *p) -{ - unsigned long flags; - unsigned long size = 0; - struct kmmio_fault_page *release_list = NULL; - struct kmmio_delayed_release *drelease; - - spin_lock_irqsave(&kmmio_lock, flags); - while (size < p->len) { - release_kmmio_fault_page(p->addr + size, &release_list); - size += PAGE_SIZE; - } - list_del_rcu(&p->list); - kmmio_count--; - spin_unlock_irqrestore(&kmmio_lock, flags); - - drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC); - if (!drelease) { - pr_crit("kmmio: leaking kmmio_fault_page objects.\n"); - return; - } - drelease->release_list = release_list; - - /* - * This is not really RCU here. We have just disarmed a set of - * pages so that they cannot trigger page faults anymore. However, - * we cannot remove the pages from kmmio_page_table, - * because a probe hit might be in flight on another CPU. The - * pages are collected into a list, and they will be removed from - * kmmio_page_table when it is certain that no probe hit related to - * these pages can be in flight. RCU grace period sounds like a - * good choice. - * - * If we removed the pages too early, kmmio page fault handler might - * not find the respective kmmio_fault_page and determine it's not - * a kmmio fault, when it actually is. This would lead to madness. - */ - call_rcu(&drelease->rcu, remove_kmmio_fault_pages); -} -EXPORT_SYMBOL(unregister_kmmio_probe); - -static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, - void *args) -{ - struct die_args *arg = args; - - if (val == DIE_DEBUG && (arg->err & DR_STEP)) - if (post_kmmio_handler(arg->err, arg->regs) == 1) - return NOTIFY_STOP; - - return NOTIFY_DONE; -} - -static struct notifier_block nb_die = { - .notifier_call = kmmio_die_notifier -}; - -static int __init init_kmmio(void) -{ - int i; - for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) - INIT_LIST_HEAD(&kmmio_page_table[i]); - return register_die_notifier(&nb_die); -} -fs_initcall(init_kmmio); /* should be before device_initcall() */ diff --git a/arch/x86/kernel/mmiotrace/mmio-mod.c b/arch/x86/kernel/mmiotrace/mmio-mod.c deleted file mode 100644 index 8256546d49bf..000000000000 --- a/arch/x86/kernel/mmiotrace/mmio-mod.c +++ /dev/null @@ -1,457 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) IBM Corporation, 2005 - * Jeff Muizelaar, 2006, 2007 - * Pekka Paalanen, 2008 - * - * Derived from the read-mod example from relay-examples by Tom Zanussi. - */ -#define DEBUG 1 - -#include -#include -#include -#include -#include -#include -#include -#include -#include /* for ISA_START_ADDRESS */ -#include -#include - -#include "pf_in.h" - -#define NAME "mmiotrace: " - -struct trap_reason { - unsigned long addr; - unsigned long ip; - enum reason_type type; - int active_traces; -}; - -struct remap_trace { - struct list_head list; - struct kmmio_probe probe; - unsigned long phys; - unsigned long id; -}; - -/* Accessed per-cpu. */ -static DEFINE_PER_CPU(struct trap_reason, pf_reason); -static DEFINE_PER_CPU(struct mmiotrace_rw, cpu_trace); - -#if 0 /* XXX: no way gather this info anymore */ -/* Access to this is not per-cpu. */ -static DEFINE_PER_CPU(atomic_t, dropped); -#endif - -static struct dentry *marker_file; - -static DEFINE_MUTEX(mmiotrace_mutex); -static DEFINE_SPINLOCK(trace_lock); -static atomic_t mmiotrace_enabled; -static LIST_HEAD(trace_list); /* struct remap_trace */ - -/* - * Locking in this file: - * - mmiotrace_mutex enforces enable/disable_mmiotrace() critical sections. - * - mmiotrace_enabled may be modified only when holding mmiotrace_mutex - * and trace_lock. - * - Routines depending on is_enabled() must take trace_lock. - * - trace_list users must hold trace_lock. - * - is_enabled() guarantees that mmio_trace_record is allowed. - * - pre/post callbacks assume the effect of is_enabled() being true. - */ - -/* module parameters */ -static unsigned long filter_offset; -static int nommiotrace; -static int ISA_trace; -static int trace_pc; - -module_param(filter_offset, ulong, 0); -module_param(nommiotrace, bool, 0); -module_param(ISA_trace, bool, 0); -module_param(trace_pc, bool, 0); - -MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); -MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); -MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); -MODULE_PARM_DESC(trace_pc, "Record address of faulting instructions."); - -static bool is_enabled(void) -{ - return atomic_read(&mmiotrace_enabled); -} - -#if 0 /* XXX: needs rewrite */ -/* - * Write callback for the debugfs entry: - * Read a marker and write it to the mmio trace log - */ -static ssize_t write_marker(struct file *file, const char __user *buffer, - size_t count, loff_t *ppos) -{ - char *event = NULL; - struct mm_io_header *headp; - ssize_t len = (count > 65535) ? 65535 : count; - - event = kzalloc(sizeof(*headp) + len, GFP_KERNEL); - if (!event) - return -ENOMEM; - - headp = (struct mm_io_header *)event; - headp->type = MMIO_MAGIC | (MMIO_MARKER << MMIO_OPCODE_SHIFT); - headp->data_len = len; - - if (copy_from_user(event + sizeof(*headp), buffer, len)) { - kfree(event); - return -EFAULT; - } - - spin_lock_irq(&trace_lock); -#if 0 /* XXX: convert this to use tracing */ - if (is_enabled()) - relay_write(chan, event, sizeof(*headp) + len); - else -#endif - len = -EINVAL; - spin_unlock_irq(&trace_lock); - kfree(event); - return len; -} -#endif - -static void print_pte(unsigned long address) -{ - int level; - pte_t *pte = lookup_address(address, &level); - - if (!pte) { - pr_err(NAME "Error in %s: no pte for page 0x%08lx\n", - __func__, address); - return; - } - - if (level == PG_LEVEL_2M) { - pr_emerg(NAME "4MB pages are not currently supported: " - "0x%08lx\n", address); - BUG(); - } - pr_info(NAME "pte for 0x%lx: 0x%lx 0x%lx\n", address, pte_val(*pte), - pte_val(*pte) & _PAGE_PRESENT); -} - -/* - * For some reason the pre/post pairs have been called in an - * unmatched order. Report and die. - */ -static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) -{ - const struct trap_reason *my_reason = &get_cpu_var(pf_reason); - pr_emerg(NAME "unexpected fault for address: 0x%08lx, " - "last fault for address: 0x%08lx\n", - addr, my_reason->addr); - print_pte(addr); - print_symbol(KERN_EMERG "faulting IP is at %s\n", regs->ip); - print_symbol(KERN_EMERG "last faulting IP was at %s\n", my_reason->ip); -#ifdef __i386__ - pr_emerg("eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", - regs->ax, regs->bx, regs->cx, regs->dx); - pr_emerg("esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", - regs->si, regs->di, regs->bp, regs->sp); -#else - pr_emerg("rax: %016lx rcx: %016lx rdx: %016lx\n", - regs->ax, regs->cx, regs->dx); - pr_emerg("rsi: %016lx rdi: %016lx rbp: %016lx rsp: %016lx\n", - regs->si, regs->di, regs->bp, regs->sp); -#endif - put_cpu_var(pf_reason); - BUG(); -} - -static void pre(struct kmmio_probe *p, struct pt_regs *regs, - unsigned long addr) -{ - struct trap_reason *my_reason = &get_cpu_var(pf_reason); - struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); - const unsigned long instptr = instruction_pointer(regs); - const enum reason_type type = get_ins_type(instptr); - struct remap_trace *trace = p->user_data; - - /* it doesn't make sense to have more than one active trace per cpu */ - if (my_reason->active_traces) - die_kmmio_nesting_error(regs, addr); - else - my_reason->active_traces++; - - my_reason->type = type; - my_reason->addr = addr; - my_reason->ip = instptr; - - my_trace->phys = addr - trace->probe.addr + trace->phys; - my_trace->map_id = trace->id; - - /* - * Only record the program counter when requested. - * It may taint clean-room reverse engineering. - */ - if (trace_pc) - my_trace->pc = instptr; - else - my_trace->pc = 0; - - /* - * XXX: the timestamp recorded will be *after* the tracing has been - * done, not at the time we hit the instruction. SMP implications - * on event ordering? - */ - - switch (type) { - case REG_READ: - my_trace->opcode = MMIO_READ; - my_trace->width = get_ins_mem_width(instptr); - break; - case REG_WRITE: - my_trace->opcode = MMIO_WRITE; - my_trace->width = get_ins_mem_width(instptr); - my_trace->value = get_ins_reg_val(instptr, regs); - break; - case IMM_WRITE: - my_trace->opcode = MMIO_WRITE; - my_trace->width = get_ins_mem_width(instptr); - my_trace->value = get_ins_imm_val(instptr); - break; - default: - { - unsigned char *ip = (unsigned char *)instptr; - my_trace->opcode = MMIO_UNKNOWN_OP; - my_trace->width = 0; - my_trace->value = (*ip) << 16 | *(ip + 1) << 8 | - *(ip + 2); - } - } - put_cpu_var(cpu_trace); - put_cpu_var(pf_reason); -} - -static void post(struct kmmio_probe *p, unsigned long condition, - struct pt_regs *regs) -{ - struct trap_reason *my_reason = &get_cpu_var(pf_reason); - struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); - - /* this should always return the active_trace count to 0 */ - my_reason->active_traces--; - if (my_reason->active_traces) { - pr_emerg(NAME "unexpected post handler"); - BUG(); - } - - switch (my_reason->type) { - case REG_READ: - my_trace->value = get_ins_reg_val(my_reason->ip, regs); - break; - default: - break; - } - - mmio_trace_rw(my_trace); - put_cpu_var(cpu_trace); - put_cpu_var(pf_reason); -} - -static void ioremap_trace_core(unsigned long offset, unsigned long size, - void __iomem *addr) -{ - static atomic_t next_id; - struct remap_trace *trace = kmalloc(sizeof(*trace), GFP_KERNEL); - struct mmiotrace_map map = { - .phys = offset, - .virt = (unsigned long)addr, - .len = size, - .opcode = MMIO_PROBE - }; - - if (!trace) { - pr_err(NAME "kmalloc failed in ioremap\n"); - return; - } - - *trace = (struct remap_trace) { - .probe = { - .addr = (unsigned long)addr, - .len = size, - .pre_handler = pre, - .post_handler = post, - .user_data = trace - }, - .phys = offset, - .id = atomic_inc_return(&next_id) - }; - map.map_id = trace->id; - - spin_lock_irq(&trace_lock); - if (!is_enabled()) - goto not_enabled; - - mmio_trace_mapping(&map); - list_add_tail(&trace->list, &trace_list); - if (!nommiotrace) - register_kmmio_probe(&trace->probe); - -not_enabled: - spin_unlock_irq(&trace_lock); -} - -void -mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr) -{ - if (!is_enabled()) /* recheck and proper locking in *_core() */ - return; - - pr_debug(NAME "ioremap_*(0x%lx, 0x%lx) = %p\n", offset, size, addr); - if ((filter_offset) && (offset != filter_offset)) - return; - ioremap_trace_core(offset, size, addr); -} - -static void iounmap_trace_core(volatile void __iomem *addr) -{ - struct mmiotrace_map map = { - .phys = 0, - .virt = (unsigned long)addr, - .len = 0, - .opcode = MMIO_UNPROBE - }; - struct remap_trace *trace; - struct remap_trace *tmp; - struct remap_trace *found_trace = NULL; - - pr_debug(NAME "Unmapping %p.\n", addr); - - spin_lock_irq(&trace_lock); - if (!is_enabled()) - goto not_enabled; - - list_for_each_entry_safe(trace, tmp, &trace_list, list) { - if ((unsigned long)addr == trace->probe.addr) { - if (!nommiotrace) - unregister_kmmio_probe(&trace->probe); - list_del(&trace->list); - found_trace = trace; - break; - } - } - map.map_id = (found_trace) ? found_trace->id : -1; - mmio_trace_mapping(&map); - -not_enabled: - spin_unlock_irq(&trace_lock); - if (found_trace) { - synchronize_rcu(); /* unregister_kmmio_probe() requirement */ - kfree(found_trace); - } -} - -void mmiotrace_iounmap(volatile void __iomem *addr) -{ - might_sleep(); - if (is_enabled()) /* recheck and proper locking in *_core() */ - iounmap_trace_core(addr); -} - -static void clear_trace_list(void) -{ - struct remap_trace *trace; - struct remap_trace *tmp; - - /* - * No locking required, because the caller ensures we are in a - * critical section via mutex, and is_enabled() is false, - * i.e. nothing can traverse or modify this list. - * Caller also ensures is_enabled() cannot change. - */ - list_for_each_entry(trace, &trace_list, list) { - pr_notice(NAME "purging non-iounmapped " - "trace @0x%08lx, size 0x%lx.\n", - trace->probe.addr, trace->probe.len); - if (!nommiotrace) - unregister_kmmio_probe(&trace->probe); - } - synchronize_rcu(); /* unregister_kmmio_probe() requirement */ - - list_for_each_entry_safe(trace, tmp, &trace_list, list) { - list_del(&trace->list); - kfree(trace); - } -} - -#if 0 /* XXX: out of order */ -static struct file_operations fops_marker = { - .owner = THIS_MODULE, - .write = write_marker -}; -#endif - -void enable_mmiotrace(void) -{ - mutex_lock(&mmiotrace_mutex); - if (is_enabled()) - goto out; - -#if 0 /* XXX: tracing does not support text entries */ - marker_file = debugfs_create_file("marker", 0660, dir, NULL, - &fops_marker); - if (!marker_file) - pr_err(NAME "marker file creation failed.\n"); -#endif - - if (nommiotrace) - pr_info(NAME "MMIO tracing disabled.\n"); - if (ISA_trace) - pr_warning(NAME "Warning! low ISA range will be traced.\n"); - spin_lock_irq(&trace_lock); - atomic_inc(&mmiotrace_enabled); - spin_unlock_irq(&trace_lock); - pr_info(NAME "enabled.\n"); -out: - mutex_unlock(&mmiotrace_mutex); -} - -void disable_mmiotrace(void) -{ - mutex_lock(&mmiotrace_mutex); - if (!is_enabled()) - goto out; - - spin_lock_irq(&trace_lock); - atomic_dec(&mmiotrace_enabled); - BUG_ON(is_enabled()); - spin_unlock_irq(&trace_lock); - - clear_trace_list(); /* guarantees: no more kmmio callbacks */ - if (marker_file) { - debugfs_remove(marker_file); - marker_file = NULL; - } - - pr_info(NAME "disabled.\n"); -out: - mutex_unlock(&mmiotrace_mutex); -} diff --git a/arch/x86/kernel/mmiotrace/pf_in.c b/arch/x86/kernel/mmiotrace/pf_in.c deleted file mode 100644 index efa1911e20ca..000000000000 --- a/arch/x86/kernel/mmiotrace/pf_in.c +++ /dev/null @@ -1,489 +0,0 @@ -/* - * Fault Injection Test harness (FI) - * Copyright (C) Intel Crop. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, - * USA. - * - */ - -/* Id: pf_in.c,v 1.1.1.1 2002/11/12 05:56:32 brlock Exp - * Copyright by Intel Crop., 2002 - * Louis Zhuang (louis.zhuang@intel.com) - * - * Bjorn Steinbrink (B.Steinbrink@gmx.de), 2007 - */ - -#include -#include /* struct pt_regs */ -#include "pf_in.h" - -#ifdef __i386__ -/* IA32 Manual 3, 2-1 */ -static unsigned char prefix_codes[] = { - 0xF0, 0xF2, 0xF3, 0x2E, 0x36, 0x3E, 0x26, 0x64, - 0x65, 0x2E, 0x3E, 0x66, 0x67 -}; -/* IA32 Manual 3, 3-432*/ -static unsigned int reg_rop[] = { - 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F -}; -static unsigned int reg_wop[] = { 0x88, 0x89 }; -static unsigned int imm_wop[] = { 0xC6, 0xC7 }; -/* IA32 Manual 3, 3-432*/ -static unsigned int rw8[] = { 0x88, 0x8A, 0xC6 }; -static unsigned int rw32[] = { - 0x89, 0x8B, 0xC7, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F -}; -static unsigned int mw8[] = { 0x88, 0x8A, 0xC6, 0xB60F, 0xBE0F }; -static unsigned int mw16[] = { 0xB70F, 0xBF0F }; -static unsigned int mw32[] = { 0x89, 0x8B, 0xC7 }; -static unsigned int mw64[] = {}; -#else /* not __i386__ */ -static unsigned char prefix_codes[] = { - 0x66, 0x67, 0x2E, 0x3E, 0x26, 0x64, 0x65, 0x36, - 0xF0, 0xF3, 0xF2, - /* REX Prefixes */ - 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, - 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f -}; -/* AMD64 Manual 3, Appendix A*/ -static unsigned int reg_rop[] = { - 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F -}; -static unsigned int reg_wop[] = { 0x88, 0x89 }; -static unsigned int imm_wop[] = { 0xC6, 0xC7 }; -static unsigned int rw8[] = { 0xC6, 0x88, 0x8A }; -static unsigned int rw32[] = { - 0xC7, 0x89, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F -}; -/* 8 bit only */ -static unsigned int mw8[] = { 0xC6, 0x88, 0x8A, 0xB60F, 0xBE0F }; -/* 16 bit only */ -static unsigned int mw16[] = { 0xB70F, 0xBF0F }; -/* 16 or 32 bit */ -static unsigned int mw32[] = { 0xC7 }; -/* 16, 32 or 64 bit */ -static unsigned int mw64[] = { 0x89, 0x8B }; -#endif /* not __i386__ */ - -static int skip_prefix(unsigned char *addr, int *shorted, int *enlarged, - int *rexr) -{ - int i; - unsigned char *p = addr; - *shorted = 0; - *enlarged = 0; - *rexr = 0; - -restart: - for (i = 0; i < ARRAY_SIZE(prefix_codes); i++) { - if (*p == prefix_codes[i]) { - if (*p == 0x66) - *shorted = 1; -#ifdef __amd64__ - if ((*p & 0xf8) == 0x48) - *enlarged = 1; - if ((*p & 0xf4) == 0x44) - *rexr = 1; -#endif - p++; - goto restart; - } - } - - return (p - addr); -} - -static int get_opcode(unsigned char *addr, unsigned int *opcode) -{ - int len; - - if (*addr == 0x0F) { - /* 0x0F is extension instruction */ - *opcode = *(unsigned short *)addr; - len = 2; - } else { - *opcode = *addr; - len = 1; - } - - return len; -} - -#define CHECK_OP_TYPE(opcode, array, type) \ - for (i = 0; i < ARRAY_SIZE(array); i++) { \ - if (array[i] == opcode) { \ - rv = type; \ - goto exit; \ - } \ - } - -enum reason_type get_ins_type(unsigned long ins_addr) -{ - unsigned int opcode; - unsigned char *p; - int shorted, enlarged, rexr; - int i; - enum reason_type rv = OTHERS; - - p = (unsigned char *)ins_addr; - p += skip_prefix(p, &shorted, &enlarged, &rexr); - p += get_opcode(p, &opcode); - - CHECK_OP_TYPE(opcode, reg_rop, REG_READ); - CHECK_OP_TYPE(opcode, reg_wop, REG_WRITE); - CHECK_OP_TYPE(opcode, imm_wop, IMM_WRITE); - -exit: - return rv; -} -#undef CHECK_OP_TYPE - -static unsigned int get_ins_reg_width(unsigned long ins_addr) -{ - unsigned int opcode; - unsigned char *p; - int i, shorted, enlarged, rexr; - - p = (unsigned char *)ins_addr; - p += skip_prefix(p, &shorted, &enlarged, &rexr); - p += get_opcode(p, &opcode); - - for (i = 0; i < ARRAY_SIZE(rw8); i++) - if (rw8[i] == opcode) - return 1; - - for (i = 0; i < ARRAY_SIZE(rw32); i++) - if (rw32[i] == opcode) - return (shorted ? 2 : (enlarged ? 8 : 4)); - - printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); - return 0; -} - -unsigned int get_ins_mem_width(unsigned long ins_addr) -{ - unsigned int opcode; - unsigned char *p; - int i, shorted, enlarged, rexr; - - p = (unsigned char *)ins_addr; - p += skip_prefix(p, &shorted, &enlarged, &rexr); - p += get_opcode(p, &opcode); - - for (i = 0; i < ARRAY_SIZE(mw8); i++) - if (mw8[i] == opcode) - return 1; - - for (i = 0; i < ARRAY_SIZE(mw16); i++) - if (mw16[i] == opcode) - return 2; - - for (i = 0; i < ARRAY_SIZE(mw32); i++) - if (mw32[i] == opcode) - return shorted ? 2 : 4; - - for (i = 0; i < ARRAY_SIZE(mw64); i++) - if (mw64[i] == opcode) - return shorted ? 2 : (enlarged ? 8 : 4); - - printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); - return 0; -} - -/* - * Define register ident in mod/rm byte. - * Note: these are NOT the same as in ptrace-abi.h. - */ -enum { - arg_AL = 0, - arg_CL = 1, - arg_DL = 2, - arg_BL = 3, - arg_AH = 4, - arg_CH = 5, - arg_DH = 6, - arg_BH = 7, - - arg_AX = 0, - arg_CX = 1, - arg_DX = 2, - arg_BX = 3, - arg_SP = 4, - arg_BP = 5, - arg_SI = 6, - arg_DI = 7, -#ifdef __amd64__ - arg_R8 = 8, - arg_R9 = 9, - arg_R10 = 10, - arg_R11 = 11, - arg_R12 = 12, - arg_R13 = 13, - arg_R14 = 14, - arg_R15 = 15 -#endif -}; - -static unsigned char *get_reg_w8(int no, struct pt_regs *regs) -{ - unsigned char *rv = NULL; - - switch (no) { - case arg_AL: - rv = (unsigned char *)®s->ax; - break; - case arg_BL: - rv = (unsigned char *)®s->bx; - break; - case arg_CL: - rv = (unsigned char *)®s->cx; - break; - case arg_DL: - rv = (unsigned char *)®s->dx; - break; - case arg_AH: - rv = 1 + (unsigned char *)®s->ax; - break; - case arg_BH: - rv = 1 + (unsigned char *)®s->bx; - break; - case arg_CH: - rv = 1 + (unsigned char *)®s->cx; - break; - case arg_DH: - rv = 1 + (unsigned char *)®s->dx; - break; -#ifdef __amd64__ - case arg_R8: - rv = (unsigned char *)®s->r8; - break; - case arg_R9: - rv = (unsigned char *)®s->r9; - break; - case arg_R10: - rv = (unsigned char *)®s->r10; - break; - case arg_R11: - rv = (unsigned char *)®s->r11; - break; - case arg_R12: - rv = (unsigned char *)®s->r12; - break; - case arg_R13: - rv = (unsigned char *)®s->r13; - break; - case arg_R14: - rv = (unsigned char *)®s->r14; - break; - case arg_R15: - rv = (unsigned char *)®s->r15; - break; -#endif - default: - printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); - break; - } - return rv; -} - -static unsigned long *get_reg_w32(int no, struct pt_regs *regs) -{ - unsigned long *rv = NULL; - - switch (no) { - case arg_AX: - rv = ®s->ax; - break; - case arg_BX: - rv = ®s->bx; - break; - case arg_CX: - rv = ®s->cx; - break; - case arg_DX: - rv = ®s->dx; - break; - case arg_SP: - rv = ®s->sp; - break; - case arg_BP: - rv = ®s->bp; - break; - case arg_SI: - rv = ®s->si; - break; - case arg_DI: - rv = ®s->di; - break; -#ifdef __amd64__ - case arg_R8: - rv = ®s->r8; - break; - case arg_R9: - rv = ®s->r9; - break; - case arg_R10: - rv = ®s->r10; - break; - case arg_R11: - rv = ®s->r11; - break; - case arg_R12: - rv = ®s->r12; - break; - case arg_R13: - rv = ®s->r13; - break; - case arg_R14: - rv = ®s->r14; - break; - case arg_R15: - rv = ®s->r15; - break; -#endif - default: - printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); - } - - return rv; -} - -unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs) -{ - unsigned int opcode; - unsigned char mod_rm; - int reg; - unsigned char *p; - int i, shorted, enlarged, rexr; - unsigned long rv; - - p = (unsigned char *)ins_addr; - p += skip_prefix(p, &shorted, &enlarged, &rexr); - p += get_opcode(p, &opcode); - for (i = 0; i < ARRAY_SIZE(reg_rop); i++) - if (reg_rop[i] == opcode) { - rv = REG_READ; - goto do_work; - } - - for (i = 0; i < ARRAY_SIZE(reg_wop); i++) - if (reg_wop[i] == opcode) { - rv = REG_WRITE; - goto do_work; - } - - printk(KERN_ERR "mmiotrace: Not a register instruction, opcode " - "0x%02x\n", opcode); - goto err; - -do_work: - mod_rm = *p; - reg = ((mod_rm >> 3) & 0x7) | (rexr << 3); - switch (get_ins_reg_width(ins_addr)) { - case 1: - return *get_reg_w8(reg, regs); - - case 2: - return *(unsigned short *)get_reg_w32(reg, regs); - - case 4: - return *(unsigned int *)get_reg_w32(reg, regs); - -#ifdef __amd64__ - case 8: - return *(unsigned long *)get_reg_w32(reg, regs); -#endif - - default: - printk(KERN_ERR "mmiotrace: Error width# %d\n", reg); - } - -err: - return 0; -} - -unsigned long get_ins_imm_val(unsigned long ins_addr) -{ - unsigned int opcode; - unsigned char mod_rm; - unsigned char mod; - unsigned char *p; - int i, shorted, enlarged, rexr; - unsigned long rv; - - p = (unsigned char *)ins_addr; - p += skip_prefix(p, &shorted, &enlarged, &rexr); - p += get_opcode(p, &opcode); - for (i = 0; i < ARRAY_SIZE(imm_wop); i++) - if (imm_wop[i] == opcode) { - rv = IMM_WRITE; - goto do_work; - } - - printk(KERN_ERR "mmiotrace: Not an immediate instruction, opcode " - "0x%02x\n", opcode); - goto err; - -do_work: - mod_rm = *p; - mod = mod_rm >> 6; - p++; - switch (mod) { - case 0: - /* if r/m is 5 we have a 32 disp (IA32 Manual 3, Table 2-2) */ - /* AMD64: XXX Check for address size prefix? */ - if ((mod_rm & 0x7) == 0x5) - p += 4; - break; - - case 1: - p += 1; - break; - - case 2: - p += 4; - break; - - case 3: - default: - printk(KERN_ERR "mmiotrace: not a memory access instruction " - "at 0x%lx, rm_mod=0x%02x\n", - ins_addr, mod_rm); - } - - switch (get_ins_reg_width(ins_addr)) { - case 1: - return *(unsigned char *)p; - - case 2: - return *(unsigned short *)p; - - case 4: - return *(unsigned int *)p; - -#ifdef __amd64__ - case 8: - return *(unsigned long *)p; -#endif - - default: - printk(KERN_ERR "mmiotrace: Error: width.\n"); - } - -err: - return 0; -} diff --git a/arch/x86/kernel/mmiotrace/pf_in.h b/arch/x86/kernel/mmiotrace/pf_in.h deleted file mode 100644 index e05341a51a27..000000000000 --- a/arch/x86/kernel/mmiotrace/pf_in.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Fault Injection Test harness (FI) - * Copyright (C) Intel Crop. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, - * USA. - * - */ - -#ifndef __PF_H_ -#define __PF_H_ - -enum reason_type { - NOT_ME, /* page fault is not in regions */ - NOTHING, /* access others point in regions */ - REG_READ, /* read from addr to reg */ - REG_WRITE, /* write from reg to addr */ - IMM_WRITE, /* write from imm to addr */ - OTHERS /* Other instructions can not intercept */ -}; - -enum reason_type get_ins_type(unsigned long ins_addr); -unsigned int get_ins_mem_width(unsigned long ins_addr); -unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs); -unsigned long get_ins_imm_val(unsigned long ins_addr); - -#endif /* __PF_H_ */ diff --git a/arch/x86/kernel/mmiotrace/testmmiotrace.c b/arch/x86/kernel/mmiotrace/testmmiotrace.c deleted file mode 100644 index cfa60b227c8d..000000000000 --- a/arch/x86/kernel/mmiotrace/testmmiotrace.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Written by Pekka Paalanen, 2008 - */ -#include -#include - -#define MODULE_NAME "testmmiotrace" - -static unsigned long mmio_address; -module_param(mmio_address, ulong, 0); -MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB."); - -static void do_write_test(void __iomem *p) -{ - unsigned int i; - for (i = 0; i < 256; i++) - iowrite8(i, p + i); - for (i = 1024; i < (5 * 1024); i += 2) - iowrite16(i * 12 + 7, p + i); - for (i = (5 * 1024); i < (16 * 1024); i += 4) - iowrite32(i * 212371 + 13, p + i); -} - -static void do_read_test(void __iomem *p) -{ - unsigned int i; - for (i = 0; i < 256; i++) - ioread8(p + i); - for (i = 1024; i < (5 * 1024); i += 2) - ioread16(p + i); - for (i = (5 * 1024); i < (16 * 1024); i += 4) - ioread32(p + i); -} - -static void do_test(void) -{ - void __iomem *p = ioremap_nocache(mmio_address, 0x4000); - if (!p) { - pr_err(MODULE_NAME ": could not ioremap, aborting.\n"); - return; - } - do_write_test(p); - do_read_test(p); - iounmap(p); -} - -static int __init init(void) -{ - if (mmio_address == 0) { - pr_err(MODULE_NAME ": you have to use the module argument " - "mmio_address.\n"); - pr_err(MODULE_NAME ": DO NOT LOAD THIS MODULE UNLESS" - " YOU REALLY KNOW WHAT YOU ARE DOING!\n"); - return -ENXIO; - } - - pr_warning(MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx " - "in PCI address space, and writing " - "rubbish in there.\n", mmio_address); - do_test(); - return 0; -} - -static void __exit cleanup(void) -{ - pr_debug(MODULE_NAME ": unloaded.\n"); -} - -module_init(init); -module_exit(cleanup); -MODULE_LICENSE("GPL"); diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index b7b3e4c7cfc9..07dab503c9e3 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -8,6 +8,11 @@ obj-$(CONFIG_X86_PTDUMP) += dump_pagetables.o obj-$(CONFIG_HIGHMEM) += highmem_32.o +obj-$(CONFIG_MMIOTRACE_HOOKS) += kmmio.o +obj-$(CONFIG_MMIOTRACE) += mmiotrace.o +mmiotrace-y := pf_in.o mmio-mod.o +obj-$(CONFIG_MMIOTRACE_TEST) += testmmiotrace.o + ifeq ($(CONFIG_X86_32),y) obj-$(CONFIG_NUMA) += discontig_32.o else diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c new file mode 100644 index 000000000000..3ad27b8504a5 --- /dev/null +++ b/arch/x86/mm/kmmio.c @@ -0,0 +1,499 @@ +/* Support for MMIO probes. + * Benfit many code from kprobes + * (C) 2002 Louis Zhuang . + * 2007 Alexander Eichner + * 2008 Pekka Paalanen + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define KMMIO_PAGE_HASH_BITS 4 +#define KMMIO_PAGE_TABLE_SIZE (1 << KMMIO_PAGE_HASH_BITS) + +struct kmmio_fault_page { + struct list_head list; + struct kmmio_fault_page *release_next; + unsigned long page; /* location of the fault page */ + + /* + * Number of times this page has been registered as a part + * of a probe. If zero, page is disarmed and this may be freed. + * Used only by writers (RCU). + */ + int count; +}; + +struct kmmio_delayed_release { + struct rcu_head rcu; + struct kmmio_fault_page *release_list; +}; + +struct kmmio_context { + struct kmmio_fault_page *fpage; + struct kmmio_probe *probe; + unsigned long saved_flags; + unsigned long addr; + int active; +}; + +static DEFINE_SPINLOCK(kmmio_lock); + +/* Protected by kmmio_lock */ +unsigned int kmmio_count; + +/* Read-protected by RCU, write-protected by kmmio_lock. */ +static struct list_head kmmio_page_table[KMMIO_PAGE_TABLE_SIZE]; +static LIST_HEAD(kmmio_probes); + +static struct list_head *kmmio_page_list(unsigned long page) +{ + return &kmmio_page_table[hash_long(page, KMMIO_PAGE_HASH_BITS)]; +} + +/* Accessed per-cpu */ +static DEFINE_PER_CPU(struct kmmio_context, kmmio_ctx); + +/* + * this is basically a dynamic stabbing problem: + * Could use the existing prio tree code or + * Possible better implementations: + * The Interval Skip List: A Data Structure for Finding All Intervals That + * Overlap a Point (might be simple) + * Space Efficient Dynamic Stabbing with Fast Queries - Mikkel Thorup + */ +/* Get the kmmio at this addr (if any). You must be holding RCU read lock. */ +static struct kmmio_probe *get_kmmio_probe(unsigned long addr) +{ + struct kmmio_probe *p; + list_for_each_entry_rcu(p, &kmmio_probes, list) { + if (addr >= p->addr && addr <= (p->addr + p->len)) + return p; + } + return NULL; +} + +/* You must be holding RCU read lock. */ +static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) +{ + struct list_head *head; + struct kmmio_fault_page *p; + + page &= PAGE_MASK; + head = kmmio_page_list(page); + list_for_each_entry_rcu(p, head, list) { + if (p->page == page) + return p; + } + return NULL; +} + +static void set_page_present(unsigned long addr, bool present, int *pglevel) +{ + pteval_t pteval; + pmdval_t pmdval; + int level; + pmd_t *pmd; + pte_t *pte = lookup_address(addr, &level); + + if (!pte) { + pr_err("kmmio: no pte for page 0x%08lx\n", addr); + return; + } + + if (pglevel) + *pglevel = level; + + switch (level) { + case PG_LEVEL_2M: + pmd = (pmd_t *)pte; + pmdval = pmd_val(*pmd) & ~_PAGE_PRESENT; + if (present) + pmdval |= _PAGE_PRESENT; + set_pmd(pmd, __pmd(pmdval)); + break; + + case PG_LEVEL_4K: + pteval = pte_val(*pte) & ~_PAGE_PRESENT; + if (present) + pteval |= _PAGE_PRESENT; + set_pte_atomic(pte, __pte(pteval)); + break; + + default: + pr_err("kmmio: unexpected page level 0x%x.\n", level); + return; + } + + __flush_tlb_one(addr); +} + +/** Mark the given page as not present. Access to it will trigger a fault. */ +static void arm_kmmio_fault_page(unsigned long page, int *page_level) +{ + set_page_present(page & PAGE_MASK, false, page_level); +} + +/** Mark the given page as present. */ +static void disarm_kmmio_fault_page(unsigned long page, int *page_level) +{ + set_page_present(page & PAGE_MASK, true, page_level); +} + +/* + * This is being called from do_page_fault(). + * + * We may be in an interrupt or a critical section. Also prefecthing may + * trigger a page fault. We may be in the middle of process switch. + * We cannot take any locks, because we could be executing especially + * within a kmmio critical section. + * + * Local interrupts are disabled, so preemption cannot happen. + * Do not enable interrupts, do not sleep, and watch out for other CPUs. + */ +/* + * Interrupts are disabled on entry as trap3 is an interrupt gate + * and they remain disabled thorough out this function. + */ +int kmmio_handler(struct pt_regs *regs, unsigned long addr) +{ + struct kmmio_context *ctx; + struct kmmio_fault_page *faultpage; + int ret = 0; /* default to fault not handled */ + + /* + * Preemption is now disabled to prevent process switch during + * single stepping. We can only handle one active kmmio trace + * per cpu, so ensure that we finish it before something else + * gets to run. We also hold the RCU read lock over single + * stepping to avoid looking up the probe and kmmio_fault_page + * again. + */ + preempt_disable(); + rcu_read_lock(); + + faultpage = get_kmmio_fault_page(addr); + if (!faultpage) { + /* + * Either this page fault is not caused by kmmio, or + * another CPU just pulled the kmmio probe from under + * our feet. The latter case should not be possible. + */ + goto no_kmmio; + } + + ctx = &get_cpu_var(kmmio_ctx); + if (ctx->active) { + disarm_kmmio_fault_page(faultpage->page, NULL); + if (addr == ctx->addr) { + /* + * On SMP we sometimes get recursive probe hits on the + * same address. Context is already saved, fall out. + */ + pr_debug("kmmio: duplicate probe hit on CPU %d, for " + "address 0x%08lx.\n", + smp_processor_id(), addr); + ret = 1; + goto no_kmmio_ctx; + } + /* + * Prevent overwriting already in-flight context. + * This should not happen, let's hope disarming at least + * prevents a panic. + */ + pr_emerg("kmmio: recursive probe hit on CPU %d, " + "for address 0x%08lx. Ignoring.\n", + smp_processor_id(), addr); + pr_emerg("kmmio: previous hit was at 0x%08lx.\n", + ctx->addr); + goto no_kmmio_ctx; + } + ctx->active++; + + ctx->fpage = faultpage; + ctx->probe = get_kmmio_probe(addr); + ctx->saved_flags = (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF)); + ctx->addr = addr; + + if (ctx->probe && ctx->probe->pre_handler) + ctx->probe->pre_handler(ctx->probe, regs, addr); + + /* + * Enable single-stepping and disable interrupts for the faulting + * context. Local interrupts must not get enabled during stepping. + */ + regs->flags |= X86_EFLAGS_TF; + regs->flags &= ~X86_EFLAGS_IF; + + /* Now we set present bit in PTE and single step. */ + disarm_kmmio_fault_page(ctx->fpage->page, NULL); + + /* + * If another cpu accesses the same page while we are stepping, + * the access will not be caught. It will simply succeed and the + * only downside is we lose the event. If this becomes a problem, + * the user should drop to single cpu before tracing. + */ + + put_cpu_var(kmmio_ctx); + return 1; /* fault handled */ + +no_kmmio_ctx: + put_cpu_var(kmmio_ctx); +no_kmmio: + rcu_read_unlock(); + preempt_enable_no_resched(); + return ret; +} + +/* + * Interrupts are disabled on entry as trap1 is an interrupt gate + * and they remain disabled thorough out this function. + * This must always get called as the pair to kmmio_handler(). + */ +static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) +{ + int ret = 0; + struct kmmio_context *ctx = &get_cpu_var(kmmio_ctx); + + if (!ctx->active) { + pr_debug("kmmio: spurious debug trap on CPU %d.\n", + smp_processor_id()); + goto out; + } + + if (ctx->probe && ctx->probe->post_handler) + ctx->probe->post_handler(ctx->probe, condition, regs); + + arm_kmmio_fault_page(ctx->fpage->page, NULL); + + regs->flags &= ~X86_EFLAGS_TF; + regs->flags |= ctx->saved_flags; + + /* These were acquired in kmmio_handler(). */ + ctx->active--; + BUG_ON(ctx->active); + rcu_read_unlock(); + preempt_enable_no_resched(); + + /* + * if somebody else is singlestepping across a probe point, flags + * will have TF set, in which case, continue the remaining processing + * of do_debug, as if this is not a probe hit. + */ + if (!(regs->flags & X86_EFLAGS_TF)) + ret = 1; +out: + put_cpu_var(kmmio_ctx); + return ret; +} + +/* You must be holding kmmio_lock. */ +static int add_kmmio_fault_page(unsigned long page) +{ + struct kmmio_fault_page *f; + + page &= PAGE_MASK; + f = get_kmmio_fault_page(page); + if (f) { + if (!f->count) + arm_kmmio_fault_page(f->page, NULL); + f->count++; + return 0; + } + + f = kmalloc(sizeof(*f), GFP_ATOMIC); + if (!f) + return -1; + + f->count = 1; + f->page = page; + list_add_rcu(&f->list, kmmio_page_list(f->page)); + + arm_kmmio_fault_page(f->page, NULL); + + return 0; +} + +/* You must be holding kmmio_lock. */ +static void release_kmmio_fault_page(unsigned long page, + struct kmmio_fault_page **release_list) +{ + struct kmmio_fault_page *f; + + page &= PAGE_MASK; + f = get_kmmio_fault_page(page); + if (!f) + return; + + f->count--; + BUG_ON(f->count < 0); + if (!f->count) { + disarm_kmmio_fault_page(f->page, NULL); + f->release_next = *release_list; + *release_list = f; + } +} + +int register_kmmio_probe(struct kmmio_probe *p) +{ + unsigned long flags; + int ret = 0; + unsigned long size = 0; + + spin_lock_irqsave(&kmmio_lock, flags); + if (get_kmmio_probe(p->addr)) { + ret = -EEXIST; + goto out; + } + kmmio_count++; + list_add_rcu(&p->list, &kmmio_probes); + while (size < p->len) { + if (add_kmmio_fault_page(p->addr + size)) + pr_err("kmmio: Unable to set page fault.\n"); + size += PAGE_SIZE; + } +out: + spin_unlock_irqrestore(&kmmio_lock, flags); + /* + * XXX: What should I do here? + * Here was a call to global_flush_tlb(), but it does not exist + * anymore. It seems it's not needed after all. + */ + return ret; +} +EXPORT_SYMBOL(register_kmmio_probe); + +static void rcu_free_kmmio_fault_pages(struct rcu_head *head) +{ + struct kmmio_delayed_release *dr = container_of( + head, + struct kmmio_delayed_release, + rcu); + struct kmmio_fault_page *p = dr->release_list; + while (p) { + struct kmmio_fault_page *next = p->release_next; + BUG_ON(p->count); + kfree(p); + p = next; + } + kfree(dr); +} + +static void remove_kmmio_fault_pages(struct rcu_head *head) +{ + struct kmmio_delayed_release *dr = container_of( + head, + struct kmmio_delayed_release, + rcu); + struct kmmio_fault_page *p = dr->release_list; + struct kmmio_fault_page **prevp = &dr->release_list; + unsigned long flags; + spin_lock_irqsave(&kmmio_lock, flags); + while (p) { + if (!p->count) + list_del_rcu(&p->list); + else + *prevp = p->release_next; + prevp = &p->release_next; + p = p->release_next; + } + spin_unlock_irqrestore(&kmmio_lock, flags); + /* This is the real RCU destroy call. */ + call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages); +} + +/* + * Remove a kmmio probe. You have to synchronize_rcu() before you can be + * sure that the callbacks will not be called anymore. Only after that + * you may actually release your struct kmmio_probe. + * + * Unregistering a kmmio fault page has three steps: + * 1. release_kmmio_fault_page() + * Disarm the page, wait a grace period to let all faults finish. + * 2. remove_kmmio_fault_pages() + * Remove the pages from kmmio_page_table. + * 3. rcu_free_kmmio_fault_pages() + * Actally free the kmmio_fault_page structs as with RCU. + */ +void unregister_kmmio_probe(struct kmmio_probe *p) +{ + unsigned long flags; + unsigned long size = 0; + struct kmmio_fault_page *release_list = NULL; + struct kmmio_delayed_release *drelease; + + spin_lock_irqsave(&kmmio_lock, flags); + while (size < p->len) { + release_kmmio_fault_page(p->addr + size, &release_list); + size += PAGE_SIZE; + } + list_del_rcu(&p->list); + kmmio_count--; + spin_unlock_irqrestore(&kmmio_lock, flags); + + drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC); + if (!drelease) { + pr_crit("kmmio: leaking kmmio_fault_page objects.\n"); + return; + } + drelease->release_list = release_list; + + /* + * This is not really RCU here. We have just disarmed a set of + * pages so that they cannot trigger page faults anymore. However, + * we cannot remove the pages from kmmio_page_table, + * because a probe hit might be in flight on another CPU. The + * pages are collected into a list, and they will be removed from + * kmmio_page_table when it is certain that no probe hit related to + * these pages can be in flight. RCU grace period sounds like a + * good choice. + * + * If we removed the pages too early, kmmio page fault handler might + * not find the respective kmmio_fault_page and determine it's not + * a kmmio fault, when it actually is. This would lead to madness. + */ + call_rcu(&drelease->rcu, remove_kmmio_fault_pages); +} +EXPORT_SYMBOL(unregister_kmmio_probe); + +static int kmmio_die_notifier(struct notifier_block *nb, unsigned long val, + void *args) +{ + struct die_args *arg = args; + + if (val == DIE_DEBUG && (arg->err & DR_STEP)) + if (post_kmmio_handler(arg->err, arg->regs) == 1) + return NOTIFY_STOP; + + return NOTIFY_DONE; +} + +static struct notifier_block nb_die = { + .notifier_call = kmmio_die_notifier +}; + +static int __init init_kmmio(void) +{ + int i; + for (i = 0; i < KMMIO_PAGE_TABLE_SIZE; i++) + INIT_LIST_HEAD(&kmmio_page_table[i]); + return register_die_notifier(&nb_die); +} +fs_initcall(init_kmmio); /* should be before device_initcall() */ diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c new file mode 100644 index 000000000000..8256546d49bf --- /dev/null +++ b/arch/x86/mm/mmio-mod.c @@ -0,0 +1,457 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2005 + * Jeff Muizelaar, 2006, 2007 + * Pekka Paalanen, 2008 + * + * Derived from the read-mod example from relay-examples by Tom Zanussi. + */ +#define DEBUG 1 + +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for ISA_START_ADDRESS */ +#include +#include + +#include "pf_in.h" + +#define NAME "mmiotrace: " + +struct trap_reason { + unsigned long addr; + unsigned long ip; + enum reason_type type; + int active_traces; +}; + +struct remap_trace { + struct list_head list; + struct kmmio_probe probe; + unsigned long phys; + unsigned long id; +}; + +/* Accessed per-cpu. */ +static DEFINE_PER_CPU(struct trap_reason, pf_reason); +static DEFINE_PER_CPU(struct mmiotrace_rw, cpu_trace); + +#if 0 /* XXX: no way gather this info anymore */ +/* Access to this is not per-cpu. */ +static DEFINE_PER_CPU(atomic_t, dropped); +#endif + +static struct dentry *marker_file; + +static DEFINE_MUTEX(mmiotrace_mutex); +static DEFINE_SPINLOCK(trace_lock); +static atomic_t mmiotrace_enabled; +static LIST_HEAD(trace_list); /* struct remap_trace */ + +/* + * Locking in this file: + * - mmiotrace_mutex enforces enable/disable_mmiotrace() critical sections. + * - mmiotrace_enabled may be modified only when holding mmiotrace_mutex + * and trace_lock. + * - Routines depending on is_enabled() must take trace_lock. + * - trace_list users must hold trace_lock. + * - is_enabled() guarantees that mmio_trace_record is allowed. + * - pre/post callbacks assume the effect of is_enabled() being true. + */ + +/* module parameters */ +static unsigned long filter_offset; +static int nommiotrace; +static int ISA_trace; +static int trace_pc; + +module_param(filter_offset, ulong, 0); +module_param(nommiotrace, bool, 0); +module_param(ISA_trace, bool, 0); +module_param(trace_pc, bool, 0); + +MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); +MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); +MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); +MODULE_PARM_DESC(trace_pc, "Record address of faulting instructions."); + +static bool is_enabled(void) +{ + return atomic_read(&mmiotrace_enabled); +} + +#if 0 /* XXX: needs rewrite */ +/* + * Write callback for the debugfs entry: + * Read a marker and write it to the mmio trace log + */ +static ssize_t write_marker(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) +{ + char *event = NULL; + struct mm_io_header *headp; + ssize_t len = (count > 65535) ? 65535 : count; + + event = kzalloc(sizeof(*headp) + len, GFP_KERNEL); + if (!event) + return -ENOMEM; + + headp = (struct mm_io_header *)event; + headp->type = MMIO_MAGIC | (MMIO_MARKER << MMIO_OPCODE_SHIFT); + headp->data_len = len; + + if (copy_from_user(event + sizeof(*headp), buffer, len)) { + kfree(event); + return -EFAULT; + } + + spin_lock_irq(&trace_lock); +#if 0 /* XXX: convert this to use tracing */ + if (is_enabled()) + relay_write(chan, event, sizeof(*headp) + len); + else +#endif + len = -EINVAL; + spin_unlock_irq(&trace_lock); + kfree(event); + return len; +} +#endif + +static void print_pte(unsigned long address) +{ + int level; + pte_t *pte = lookup_address(address, &level); + + if (!pte) { + pr_err(NAME "Error in %s: no pte for page 0x%08lx\n", + __func__, address); + return; + } + + if (level == PG_LEVEL_2M) { + pr_emerg(NAME "4MB pages are not currently supported: " + "0x%08lx\n", address); + BUG(); + } + pr_info(NAME "pte for 0x%lx: 0x%lx 0x%lx\n", address, pte_val(*pte), + pte_val(*pte) & _PAGE_PRESENT); +} + +/* + * For some reason the pre/post pairs have been called in an + * unmatched order. Report and die. + */ +static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) +{ + const struct trap_reason *my_reason = &get_cpu_var(pf_reason); + pr_emerg(NAME "unexpected fault for address: 0x%08lx, " + "last fault for address: 0x%08lx\n", + addr, my_reason->addr); + print_pte(addr); + print_symbol(KERN_EMERG "faulting IP is at %s\n", regs->ip); + print_symbol(KERN_EMERG "last faulting IP was at %s\n", my_reason->ip); +#ifdef __i386__ + pr_emerg("eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", + regs->ax, regs->bx, regs->cx, regs->dx); + pr_emerg("esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", + regs->si, regs->di, regs->bp, regs->sp); +#else + pr_emerg("rax: %016lx rcx: %016lx rdx: %016lx\n", + regs->ax, regs->cx, regs->dx); + pr_emerg("rsi: %016lx rdi: %016lx rbp: %016lx rsp: %016lx\n", + regs->si, regs->di, regs->bp, regs->sp); +#endif + put_cpu_var(pf_reason); + BUG(); +} + +static void pre(struct kmmio_probe *p, struct pt_regs *regs, + unsigned long addr) +{ + struct trap_reason *my_reason = &get_cpu_var(pf_reason); + struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); + const unsigned long instptr = instruction_pointer(regs); + const enum reason_type type = get_ins_type(instptr); + struct remap_trace *trace = p->user_data; + + /* it doesn't make sense to have more than one active trace per cpu */ + if (my_reason->active_traces) + die_kmmio_nesting_error(regs, addr); + else + my_reason->active_traces++; + + my_reason->type = type; + my_reason->addr = addr; + my_reason->ip = instptr; + + my_trace->phys = addr - trace->probe.addr + trace->phys; + my_trace->map_id = trace->id; + + /* + * Only record the program counter when requested. + * It may taint clean-room reverse engineering. + */ + if (trace_pc) + my_trace->pc = instptr; + else + my_trace->pc = 0; + + /* + * XXX: the timestamp recorded will be *after* the tracing has been + * done, not at the time we hit the instruction. SMP implications + * on event ordering? + */ + + switch (type) { + case REG_READ: + my_trace->opcode = MMIO_READ; + my_trace->width = get_ins_mem_width(instptr); + break; + case REG_WRITE: + my_trace->opcode = MMIO_WRITE; + my_trace->width = get_ins_mem_width(instptr); + my_trace->value = get_ins_reg_val(instptr, regs); + break; + case IMM_WRITE: + my_trace->opcode = MMIO_WRITE; + my_trace->width = get_ins_mem_width(instptr); + my_trace->value = get_ins_imm_val(instptr); + break; + default: + { + unsigned char *ip = (unsigned char *)instptr; + my_trace->opcode = MMIO_UNKNOWN_OP; + my_trace->width = 0; + my_trace->value = (*ip) << 16 | *(ip + 1) << 8 | + *(ip + 2); + } + } + put_cpu_var(cpu_trace); + put_cpu_var(pf_reason); +} + +static void post(struct kmmio_probe *p, unsigned long condition, + struct pt_regs *regs) +{ + struct trap_reason *my_reason = &get_cpu_var(pf_reason); + struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); + + /* this should always return the active_trace count to 0 */ + my_reason->active_traces--; + if (my_reason->active_traces) { + pr_emerg(NAME "unexpected post handler"); + BUG(); + } + + switch (my_reason->type) { + case REG_READ: + my_trace->value = get_ins_reg_val(my_reason->ip, regs); + break; + default: + break; + } + + mmio_trace_rw(my_trace); + put_cpu_var(cpu_trace); + put_cpu_var(pf_reason); +} + +static void ioremap_trace_core(unsigned long offset, unsigned long size, + void __iomem *addr) +{ + static atomic_t next_id; + struct remap_trace *trace = kmalloc(sizeof(*trace), GFP_KERNEL); + struct mmiotrace_map map = { + .phys = offset, + .virt = (unsigned long)addr, + .len = size, + .opcode = MMIO_PROBE + }; + + if (!trace) { + pr_err(NAME "kmalloc failed in ioremap\n"); + return; + } + + *trace = (struct remap_trace) { + .probe = { + .addr = (unsigned long)addr, + .len = size, + .pre_handler = pre, + .post_handler = post, + .user_data = trace + }, + .phys = offset, + .id = atomic_inc_return(&next_id) + }; + map.map_id = trace->id; + + spin_lock_irq(&trace_lock); + if (!is_enabled()) + goto not_enabled; + + mmio_trace_mapping(&map); + list_add_tail(&trace->list, &trace_list); + if (!nommiotrace) + register_kmmio_probe(&trace->probe); + +not_enabled: + spin_unlock_irq(&trace_lock); +} + +void +mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr) +{ + if (!is_enabled()) /* recheck and proper locking in *_core() */ + return; + + pr_debug(NAME "ioremap_*(0x%lx, 0x%lx) = %p\n", offset, size, addr); + if ((filter_offset) && (offset != filter_offset)) + return; + ioremap_trace_core(offset, size, addr); +} + +static void iounmap_trace_core(volatile void __iomem *addr) +{ + struct mmiotrace_map map = { + .phys = 0, + .virt = (unsigned long)addr, + .len = 0, + .opcode = MMIO_UNPROBE + }; + struct remap_trace *trace; + struct remap_trace *tmp; + struct remap_trace *found_trace = NULL; + + pr_debug(NAME "Unmapping %p.\n", addr); + + spin_lock_irq(&trace_lock); + if (!is_enabled()) + goto not_enabled; + + list_for_each_entry_safe(trace, tmp, &trace_list, list) { + if ((unsigned long)addr == trace->probe.addr) { + if (!nommiotrace) + unregister_kmmio_probe(&trace->probe); + list_del(&trace->list); + found_trace = trace; + break; + } + } + map.map_id = (found_trace) ? found_trace->id : -1; + mmio_trace_mapping(&map); + +not_enabled: + spin_unlock_irq(&trace_lock); + if (found_trace) { + synchronize_rcu(); /* unregister_kmmio_probe() requirement */ + kfree(found_trace); + } +} + +void mmiotrace_iounmap(volatile void __iomem *addr) +{ + might_sleep(); + if (is_enabled()) /* recheck and proper locking in *_core() */ + iounmap_trace_core(addr); +} + +static void clear_trace_list(void) +{ + struct remap_trace *trace; + struct remap_trace *tmp; + + /* + * No locking required, because the caller ensures we are in a + * critical section via mutex, and is_enabled() is false, + * i.e. nothing can traverse or modify this list. + * Caller also ensures is_enabled() cannot change. + */ + list_for_each_entry(trace, &trace_list, list) { + pr_notice(NAME "purging non-iounmapped " + "trace @0x%08lx, size 0x%lx.\n", + trace->probe.addr, trace->probe.len); + if (!nommiotrace) + unregister_kmmio_probe(&trace->probe); + } + synchronize_rcu(); /* unregister_kmmio_probe() requirement */ + + list_for_each_entry_safe(trace, tmp, &trace_list, list) { + list_del(&trace->list); + kfree(trace); + } +} + +#if 0 /* XXX: out of order */ +static struct file_operations fops_marker = { + .owner = THIS_MODULE, + .write = write_marker +}; +#endif + +void enable_mmiotrace(void) +{ + mutex_lock(&mmiotrace_mutex); + if (is_enabled()) + goto out; + +#if 0 /* XXX: tracing does not support text entries */ + marker_file = debugfs_create_file("marker", 0660, dir, NULL, + &fops_marker); + if (!marker_file) + pr_err(NAME "marker file creation failed.\n"); +#endif + + if (nommiotrace) + pr_info(NAME "MMIO tracing disabled.\n"); + if (ISA_trace) + pr_warning(NAME "Warning! low ISA range will be traced.\n"); + spin_lock_irq(&trace_lock); + atomic_inc(&mmiotrace_enabled); + spin_unlock_irq(&trace_lock); + pr_info(NAME "enabled.\n"); +out: + mutex_unlock(&mmiotrace_mutex); +} + +void disable_mmiotrace(void) +{ + mutex_lock(&mmiotrace_mutex); + if (!is_enabled()) + goto out; + + spin_lock_irq(&trace_lock); + atomic_dec(&mmiotrace_enabled); + BUG_ON(is_enabled()); + spin_unlock_irq(&trace_lock); + + clear_trace_list(); /* guarantees: no more kmmio callbacks */ + if (marker_file) { + debugfs_remove(marker_file); + marker_file = NULL; + } + + pr_info(NAME "disabled.\n"); +out: + mutex_unlock(&mmiotrace_mutex); +} diff --git a/arch/x86/mm/pf_in.c b/arch/x86/mm/pf_in.c new file mode 100644 index 000000000000..efa1911e20ca --- /dev/null +++ b/arch/x86/mm/pf_in.c @@ -0,0 +1,489 @@ +/* + * Fault Injection Test harness (FI) + * Copyright (C) Intel Crop. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + * + */ + +/* Id: pf_in.c,v 1.1.1.1 2002/11/12 05:56:32 brlock Exp + * Copyright by Intel Crop., 2002 + * Louis Zhuang (louis.zhuang@intel.com) + * + * Bjorn Steinbrink (B.Steinbrink@gmx.de), 2007 + */ + +#include +#include /* struct pt_regs */ +#include "pf_in.h" + +#ifdef __i386__ +/* IA32 Manual 3, 2-1 */ +static unsigned char prefix_codes[] = { + 0xF0, 0xF2, 0xF3, 0x2E, 0x36, 0x3E, 0x26, 0x64, + 0x65, 0x2E, 0x3E, 0x66, 0x67 +}; +/* IA32 Manual 3, 3-432*/ +static unsigned int reg_rop[] = { + 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +static unsigned int reg_wop[] = { 0x88, 0x89 }; +static unsigned int imm_wop[] = { 0xC6, 0xC7 }; +/* IA32 Manual 3, 3-432*/ +static unsigned int rw8[] = { 0x88, 0x8A, 0xC6 }; +static unsigned int rw32[] = { + 0x89, 0x8B, 0xC7, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +static unsigned int mw8[] = { 0x88, 0x8A, 0xC6, 0xB60F, 0xBE0F }; +static unsigned int mw16[] = { 0xB70F, 0xBF0F }; +static unsigned int mw32[] = { 0x89, 0x8B, 0xC7 }; +static unsigned int mw64[] = {}; +#else /* not __i386__ */ +static unsigned char prefix_codes[] = { + 0x66, 0x67, 0x2E, 0x3E, 0x26, 0x64, 0x65, 0x36, + 0xF0, 0xF3, 0xF2, + /* REX Prefixes */ + 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, + 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f +}; +/* AMD64 Manual 3, Appendix A*/ +static unsigned int reg_rop[] = { + 0x8A, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +static unsigned int reg_wop[] = { 0x88, 0x89 }; +static unsigned int imm_wop[] = { 0xC6, 0xC7 }; +static unsigned int rw8[] = { 0xC6, 0x88, 0x8A }; +static unsigned int rw32[] = { + 0xC7, 0x89, 0x8B, 0xB60F, 0xB70F, 0xBE0F, 0xBF0F +}; +/* 8 bit only */ +static unsigned int mw8[] = { 0xC6, 0x88, 0x8A, 0xB60F, 0xBE0F }; +/* 16 bit only */ +static unsigned int mw16[] = { 0xB70F, 0xBF0F }; +/* 16 or 32 bit */ +static unsigned int mw32[] = { 0xC7 }; +/* 16, 32 or 64 bit */ +static unsigned int mw64[] = { 0x89, 0x8B }; +#endif /* not __i386__ */ + +static int skip_prefix(unsigned char *addr, int *shorted, int *enlarged, + int *rexr) +{ + int i; + unsigned char *p = addr; + *shorted = 0; + *enlarged = 0; + *rexr = 0; + +restart: + for (i = 0; i < ARRAY_SIZE(prefix_codes); i++) { + if (*p == prefix_codes[i]) { + if (*p == 0x66) + *shorted = 1; +#ifdef __amd64__ + if ((*p & 0xf8) == 0x48) + *enlarged = 1; + if ((*p & 0xf4) == 0x44) + *rexr = 1; +#endif + p++; + goto restart; + } + } + + return (p - addr); +} + +static int get_opcode(unsigned char *addr, unsigned int *opcode) +{ + int len; + + if (*addr == 0x0F) { + /* 0x0F is extension instruction */ + *opcode = *(unsigned short *)addr; + len = 2; + } else { + *opcode = *addr; + len = 1; + } + + return len; +} + +#define CHECK_OP_TYPE(opcode, array, type) \ + for (i = 0; i < ARRAY_SIZE(array); i++) { \ + if (array[i] == opcode) { \ + rv = type; \ + goto exit; \ + } \ + } + +enum reason_type get_ins_type(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char *p; + int shorted, enlarged, rexr; + int i; + enum reason_type rv = OTHERS; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + + CHECK_OP_TYPE(opcode, reg_rop, REG_READ); + CHECK_OP_TYPE(opcode, reg_wop, REG_WRITE); + CHECK_OP_TYPE(opcode, imm_wop, IMM_WRITE); + +exit: + return rv; +} +#undef CHECK_OP_TYPE + +static unsigned int get_ins_reg_width(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char *p; + int i, shorted, enlarged, rexr; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + + for (i = 0; i < ARRAY_SIZE(rw8); i++) + if (rw8[i] == opcode) + return 1; + + for (i = 0; i < ARRAY_SIZE(rw32); i++) + if (rw32[i] == opcode) + return (shorted ? 2 : (enlarged ? 8 : 4)); + + printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); + return 0; +} + +unsigned int get_ins_mem_width(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char *p; + int i, shorted, enlarged, rexr; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + + for (i = 0; i < ARRAY_SIZE(mw8); i++) + if (mw8[i] == opcode) + return 1; + + for (i = 0; i < ARRAY_SIZE(mw16); i++) + if (mw16[i] == opcode) + return 2; + + for (i = 0; i < ARRAY_SIZE(mw32); i++) + if (mw32[i] == opcode) + return shorted ? 2 : 4; + + for (i = 0; i < ARRAY_SIZE(mw64); i++) + if (mw64[i] == opcode) + return shorted ? 2 : (enlarged ? 8 : 4); + + printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode); + return 0; +} + +/* + * Define register ident in mod/rm byte. + * Note: these are NOT the same as in ptrace-abi.h. + */ +enum { + arg_AL = 0, + arg_CL = 1, + arg_DL = 2, + arg_BL = 3, + arg_AH = 4, + arg_CH = 5, + arg_DH = 6, + arg_BH = 7, + + arg_AX = 0, + arg_CX = 1, + arg_DX = 2, + arg_BX = 3, + arg_SP = 4, + arg_BP = 5, + arg_SI = 6, + arg_DI = 7, +#ifdef __amd64__ + arg_R8 = 8, + arg_R9 = 9, + arg_R10 = 10, + arg_R11 = 11, + arg_R12 = 12, + arg_R13 = 13, + arg_R14 = 14, + arg_R15 = 15 +#endif +}; + +static unsigned char *get_reg_w8(int no, struct pt_regs *regs) +{ + unsigned char *rv = NULL; + + switch (no) { + case arg_AL: + rv = (unsigned char *)®s->ax; + break; + case arg_BL: + rv = (unsigned char *)®s->bx; + break; + case arg_CL: + rv = (unsigned char *)®s->cx; + break; + case arg_DL: + rv = (unsigned char *)®s->dx; + break; + case arg_AH: + rv = 1 + (unsigned char *)®s->ax; + break; + case arg_BH: + rv = 1 + (unsigned char *)®s->bx; + break; + case arg_CH: + rv = 1 + (unsigned char *)®s->cx; + break; + case arg_DH: + rv = 1 + (unsigned char *)®s->dx; + break; +#ifdef __amd64__ + case arg_R8: + rv = (unsigned char *)®s->r8; + break; + case arg_R9: + rv = (unsigned char *)®s->r9; + break; + case arg_R10: + rv = (unsigned char *)®s->r10; + break; + case arg_R11: + rv = (unsigned char *)®s->r11; + break; + case arg_R12: + rv = (unsigned char *)®s->r12; + break; + case arg_R13: + rv = (unsigned char *)®s->r13; + break; + case arg_R14: + rv = (unsigned char *)®s->r14; + break; + case arg_R15: + rv = (unsigned char *)®s->r15; + break; +#endif + default: + printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); + break; + } + return rv; +} + +static unsigned long *get_reg_w32(int no, struct pt_regs *regs) +{ + unsigned long *rv = NULL; + + switch (no) { + case arg_AX: + rv = ®s->ax; + break; + case arg_BX: + rv = ®s->bx; + break; + case arg_CX: + rv = ®s->cx; + break; + case arg_DX: + rv = ®s->dx; + break; + case arg_SP: + rv = ®s->sp; + break; + case arg_BP: + rv = ®s->bp; + break; + case arg_SI: + rv = ®s->si; + break; + case arg_DI: + rv = ®s->di; + break; +#ifdef __amd64__ + case arg_R8: + rv = ®s->r8; + break; + case arg_R9: + rv = ®s->r9; + break; + case arg_R10: + rv = ®s->r10; + break; + case arg_R11: + rv = ®s->r11; + break; + case arg_R12: + rv = ®s->r12; + break; + case arg_R13: + rv = ®s->r13; + break; + case arg_R14: + rv = ®s->r14; + break; + case arg_R15: + rv = ®s->r15; + break; +#endif + default: + printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no); + } + + return rv; +} + +unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs) +{ + unsigned int opcode; + unsigned char mod_rm; + int reg; + unsigned char *p; + int i, shorted, enlarged, rexr; + unsigned long rv; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + for (i = 0; i < ARRAY_SIZE(reg_rop); i++) + if (reg_rop[i] == opcode) { + rv = REG_READ; + goto do_work; + } + + for (i = 0; i < ARRAY_SIZE(reg_wop); i++) + if (reg_wop[i] == opcode) { + rv = REG_WRITE; + goto do_work; + } + + printk(KERN_ERR "mmiotrace: Not a register instruction, opcode " + "0x%02x\n", opcode); + goto err; + +do_work: + mod_rm = *p; + reg = ((mod_rm >> 3) & 0x7) | (rexr << 3); + switch (get_ins_reg_width(ins_addr)) { + case 1: + return *get_reg_w8(reg, regs); + + case 2: + return *(unsigned short *)get_reg_w32(reg, regs); + + case 4: + return *(unsigned int *)get_reg_w32(reg, regs); + +#ifdef __amd64__ + case 8: + return *(unsigned long *)get_reg_w32(reg, regs); +#endif + + default: + printk(KERN_ERR "mmiotrace: Error width# %d\n", reg); + } + +err: + return 0; +} + +unsigned long get_ins_imm_val(unsigned long ins_addr) +{ + unsigned int opcode; + unsigned char mod_rm; + unsigned char mod; + unsigned char *p; + int i, shorted, enlarged, rexr; + unsigned long rv; + + p = (unsigned char *)ins_addr; + p += skip_prefix(p, &shorted, &enlarged, &rexr); + p += get_opcode(p, &opcode); + for (i = 0; i < ARRAY_SIZE(imm_wop); i++) + if (imm_wop[i] == opcode) { + rv = IMM_WRITE; + goto do_work; + } + + printk(KERN_ERR "mmiotrace: Not an immediate instruction, opcode " + "0x%02x\n", opcode); + goto err; + +do_work: + mod_rm = *p; + mod = mod_rm >> 6; + p++; + switch (mod) { + case 0: + /* if r/m is 5 we have a 32 disp (IA32 Manual 3, Table 2-2) */ + /* AMD64: XXX Check for address size prefix? */ + if ((mod_rm & 0x7) == 0x5) + p += 4; + break; + + case 1: + p += 1; + break; + + case 2: + p += 4; + break; + + case 3: + default: + printk(KERN_ERR "mmiotrace: not a memory access instruction " + "at 0x%lx, rm_mod=0x%02x\n", + ins_addr, mod_rm); + } + + switch (get_ins_reg_width(ins_addr)) { + case 1: + return *(unsigned char *)p; + + case 2: + return *(unsigned short *)p; + + case 4: + return *(unsigned int *)p; + +#ifdef __amd64__ + case 8: + return *(unsigned long *)p; +#endif + + default: + printk(KERN_ERR "mmiotrace: Error: width.\n"); + } + +err: + return 0; +} diff --git a/arch/x86/mm/pf_in.h b/arch/x86/mm/pf_in.h new file mode 100644 index 000000000000..e05341a51a27 --- /dev/null +++ b/arch/x86/mm/pf_in.h @@ -0,0 +1,39 @@ +/* + * Fault Injection Test harness (FI) + * Copyright (C) Intel Crop. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, + * USA. + * + */ + +#ifndef __PF_H_ +#define __PF_H_ + +enum reason_type { + NOT_ME, /* page fault is not in regions */ + NOTHING, /* access others point in regions */ + REG_READ, /* read from addr to reg */ + REG_WRITE, /* write from reg to addr */ + IMM_WRITE, /* write from imm to addr */ + OTHERS /* Other instructions can not intercept */ +}; + +enum reason_type get_ins_type(unsigned long ins_addr); +unsigned int get_ins_mem_width(unsigned long ins_addr); +unsigned long get_ins_reg_val(unsigned long ins_addr, struct pt_regs *regs); +unsigned long get_ins_imm_val(unsigned long ins_addr); + +#endif /* __PF_H_ */ diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c new file mode 100644 index 000000000000..cfa60b227c8d --- /dev/null +++ b/arch/x86/mm/testmmiotrace.c @@ -0,0 +1,71 @@ +/* + * Written by Pekka Paalanen, 2008 + */ +#include +#include + +#define MODULE_NAME "testmmiotrace" + +static unsigned long mmio_address; +module_param(mmio_address, ulong, 0); +MODULE_PARM_DESC(mmio_address, "Start address of the mapping of 16 kB."); + +static void do_write_test(void __iomem *p) +{ + unsigned int i; + for (i = 0; i < 256; i++) + iowrite8(i, p + i); + for (i = 1024; i < (5 * 1024); i += 2) + iowrite16(i * 12 + 7, p + i); + for (i = (5 * 1024); i < (16 * 1024); i += 4) + iowrite32(i * 212371 + 13, p + i); +} + +static void do_read_test(void __iomem *p) +{ + unsigned int i; + for (i = 0; i < 256; i++) + ioread8(p + i); + for (i = 1024; i < (5 * 1024); i += 2) + ioread16(p + i); + for (i = (5 * 1024); i < (16 * 1024); i += 4) + ioread32(p + i); +} + +static void do_test(void) +{ + void __iomem *p = ioremap_nocache(mmio_address, 0x4000); + if (!p) { + pr_err(MODULE_NAME ": could not ioremap, aborting.\n"); + return; + } + do_write_test(p); + do_read_test(p); + iounmap(p); +} + +static int __init init(void) +{ + if (mmio_address == 0) { + pr_err(MODULE_NAME ": you have to use the module argument " + "mmio_address.\n"); + pr_err(MODULE_NAME ": DO NOT LOAD THIS MODULE UNLESS" + " YOU REALLY KNOW WHAT YOU ARE DOING!\n"); + return -ENXIO; + } + + pr_warning(MODULE_NAME ": WARNING: mapping 16 kB @ 0x%08lx " + "in PCI address space, and writing " + "rubbish in there.\n", mmio_address); + do_test(); + return 0; +} + +static void __exit cleanup(void) +{ + pr_debug(MODULE_NAME ": unloaded.\n"); +} + +module_init(init); +module_exit(cleanup); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From e4b37ee68609037ffcaa2fcfae47cd31a605bb9e Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:59 +0200 Subject: x86 mmiotrace: remove ISA_trace parameter. This had become a no-op. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/mmio-mod.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 8256546d49bf..ab2bb776d310 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -81,17 +81,14 @@ static LIST_HEAD(trace_list); /* struct remap_trace */ /* module parameters */ static unsigned long filter_offset; static int nommiotrace; -static int ISA_trace; static int trace_pc; module_param(filter_offset, ulong, 0); module_param(nommiotrace, bool, 0); -module_param(ISA_trace, bool, 0); module_param(trace_pc, bool, 0); MODULE_PARM_DESC(filter_offset, "Start address of traced mappings."); MODULE_PARM_DESC(nommiotrace, "Disable actual MMIO tracing."); -MODULE_PARM_DESC(ISA_trace, "Do not exclude the low ISA range."); MODULE_PARM_DESC(trace_pc, "Record address of faulting instructions."); static bool is_enabled(void) @@ -424,8 +421,6 @@ void enable_mmiotrace(void) if (nommiotrace) pr_info(NAME "MMIO tracing disabled.\n"); - if (ISA_trace) - pr_warning(NAME "Warning! low ISA range will be traced.\n"); spin_lock_irq(&trace_lock); atomic_inc(&mmiotrace_enabled); spin_unlock_irq(&trace_lock); -- cgit v1.2.3 From 736ca61fa81874b3fee205a593251b1869d0bcf1 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:59 +0200 Subject: x86 mmiotrace: Do not print bogus pid Non-zero pid indicates the MMIO access originated in user space. We do not catch that kind of accesses yet, so always print zero for now. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/trace/trace_mmiotrace.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c index 361472b5788c..79be4a18ec1e 100644 --- a/kernel/trace/trace_mmiotrace.c +++ b/kernel/trace/trace_mmiotrace.c @@ -117,20 +117,20 @@ static int mmio_print_rw(struct trace_iterator *iter) ret = trace_seq_printf(s, "R %d %lu.%06lu %d 0x%lx 0x%lx 0x%lx %d\n", rw->width, secs, usec_rem, rw->map_id, rw->phys, - rw->value, rw->pc, entry->pid); + rw->value, rw->pc, 0); break; case MMIO_WRITE: ret = trace_seq_printf(s, "W %d %lu.%06lu %d 0x%lx 0x%lx 0x%lx %d\n", rw->width, secs, usec_rem, rw->map_id, rw->phys, - rw->value, rw->pc, entry->pid); + rw->value, rw->pc, 0); break; case MMIO_UNKNOWN_OP: ret = trace_seq_printf(s, "UNKNOWN %lu.%06lu %d 0x%lx %02x,%02x,%02x 0x%lx %d\n", secs, usec_rem, rw->map_id, rw->phys, (rw->value >> 16) & 0xff, (rw->value >> 8) & 0xff, - (rw->value >> 0) & 0xff, rw->pc, entry->pid); + (rw->value >> 0) & 0xff, rw->pc, 0); break; default: ret = trace_seq_printf(s, "rw what?\n"); -- cgit v1.2.3 From c6c67c1afcce71335b18ed8769b1165c468bfb03 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:20:59 +0200 Subject: mmiotrace: add user documentation Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- Documentation/tracers/mmiotrace.txt | 153 ++++++++++++++++++++++++++++++++++++ arch/x86/Kconfig.debug | 8 +- 2 files changed, 156 insertions(+), 5 deletions(-) create mode 100644 Documentation/tracers/mmiotrace.txt diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/tracers/mmiotrace.txt new file mode 100644 index 000000000000..84246f703875 --- /dev/null +++ b/Documentation/tracers/mmiotrace.txt @@ -0,0 +1,153 @@ + In-kernel memory-mapped I/O tracing + + +Home page and links to optional user space tools: + + http://nouveau.freedesktop.org/wiki/MmioTrace + +MMIO tracing was originally developed by Intel around 2003 for their Fault +Injection Test Harness. In Dec 2006 - Jan 2007, using the code from Intel, +Jeff Muizelaar created a tool for tracing MMIO accesses with the Nouveau +project in mind. Since then many people have contributed. + +Mmiotrace was built for reverse engineering any memory-mapped IO device with +the Nouveau project as the first real user. Only x86 and x86_64 architectures +are supported. + +Out-of-tree mmiotrace was originally modified for mainline inclusion and +ftrace framework by Pekka Paalanen . + + +Preparation +----------- + +Mmiotrace feature is compiled in by the CONFIG_MMIOTRACE option. Tracing is +disabled by default, so it is safe to have this set to yes. SMP systems are +supported, but tracing is unreliable and may miss events if more than one CPU +is on-line, therefore mmiotrace takes all but one CPU off-line during run-time +activation [not implemented]. + + +Usage Quick Reference +--------------------- + +$ mount -t debugfs debugfs /debug +$ echo mmiotrace > /debug/tracing/current_tracer +$ cat /debug/tracing/trace_pipe > mydump.txt & +Start X or whatever. +$ echo "X is up" > /debug/tracing/marker +$ echo none > /debug/tracing/current_tracer +Check kernel log. + + +Usage +----- + +Make sure debugfs is mounted to /debug. If not, (requires root privileges) +$ mount -t debugfs debugfs /debug + +Check that the driver you are about to trace is not loaded. + +Activate mmiotrace (requires root privileges): +$ echo mmiotrace > /debug/tracing/current_tracer + +Start storing the trace: +$ cat /debug/tracing/trace_pipe > mydump.txt & +The 'cat' process should stay running (sleeping) in the background. + +Load the driver you want to trace and use it. Mmiotrace will only catch MMIO +accesses to areas that are ioremapped while mmiotrace is active. + +[Unimplemented feature:] +During tracing you can place comments (markers) into the trace by +$ echo "X is up" > /debug/tracing/marker +This makes it easier to see which part of the (huge) trace corresponds to +which action. It is recommended to place descriptive markers about what you +do. + +Shut down mmiotrace (requires root privileges): +$ echo none > /debug/tracing/current_tracer +The 'cat' process exits. If it does not, kill it by 'fg' and pressing ctrl+c. + +[This feature is not implemented yet!] +Check your kernel log. If there are messages about mmiotrace losing events, +this is due to buffer overrun, and the trace is incomplete. You should enlarge +the buffers and try again. [How?] + +If you are doing a trace for a driver project, e.g. Nouveau, you should also +do the following before sending your results: +$ lspci -vvv > lspci.txt +$ dmesg > dmesg.txt +$ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt +and then send the .tar.gz file. The trace compresses considerably. Replace +"pciid" and "nick" with the PCI ID or model name of your piece of hardware +under investigation and your nick name. + + +How Mmiotrace Works +------------------- + +Access to hardware IO-memory is gained by mapping addresses from PCI bus by +calling one of the ioremap_*() functions. Mmiotrace is hooked into the +__ioremap() function and gets called whenever a mapping is created. Mapping is +an event that is recorded into the trace log. Note, that ISA range mappings +are not caught, since the mapping always exists and is returned directly. + +MMIO accesses are recorded via page faults. Just before __ioremap() returns, +the mapped pages are marked as not present. Any access to the pages causes a +fault. The page fault handler calls mmiotrace to handle the fault. Mmiotrace +marks the page present, sets TF flag to achieve single stepping and exits the +fault handler. The instruction that faulted is executed and debug trap is +entered. Here mmiotrace again marks the page as not present. The instruction +is decoded to get the type of operation (read/write), data width and the value +read or written. These are stored to the trace log. + +Setting the page present in the page fault handler has a race condition on SMP +machines. During the single stepping other CPUs may run freely on that page +and events can be missed without a notice. Re-enabling other CPUs during +tracing is discouraged. + + +Trace Log Format +---------------- + +The raw log is text and easily filtered with e.g. grep and awk. One record is +one line in the log. A record starts with a keyword, followed by keyword +dependant arguments. Arguments are separated by a space, or continue until the +end of line. The format for version 20070824 is as follows: + +Explanation Keyword Space separated arguments +--------------------------------------------------------------------------- + +read event R width, timestamp, map id, physical, value, PC, PID +write event W width, timestamp, map id, physical, value, PC, PID +ioremap event MAP timestamp, map id, physical, virtual, length, PC, PID +iounmap event UNMAP timestamp, map id, PC, PID +marker MARK timestamp, text +version VERSION the string "20070824" +info for reader LSPCI one line from lspci -v +PCI address map PCIDEV space separated /proc/bus/pci/devices data +unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID + +Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual +is a kernel virtual address. Width is the data width in bytes and value is the +data value. Map id is an arbitrary id number identifying the mapping that was +used in an operation. PC is the program counter and PID is process id. PC is +zero if it is not recorded. PID is always zero as tracing MMIO accesses +originating in user space memory is not yet supported. + +For instance, the following awk filter will pass all 32-bit writes that target +physical addresses in the range [0xfb73ce40, 0xfb800000[ + +$ awk '/W 4 / { adr=strtonum($5); if (adr >= 0xfb73ce40 && +adr < 0xfb800000) print; }' + + +Tools for Developers +-------------------- + +The user space tools include utilities for: +- replacing numeric addresses and values with hardware register names +- replaying MMIO logs, i.e., re-executing the recorded writes + + diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 1d6de0d67f99..b28ace2be1a3 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -180,12 +180,10 @@ config MMIOTRACE help Mmiotrace traces Memory Mapped I/O access and is meant for debugging and reverse engineering. It is called from the ioremap - implementation and works via page faults. A user space program is - required to collect the MMIO data from debugfs files. - Tracing is disabled by default and can be enabled from a debugfs - file. + implementation and works via page faults. Tracing is disabled by + default and can be enabled run-time. - See http://nouveau.freedesktop.org/wiki/MmioTrace + See Documentation/tracers/mmiotrace.txt. If you are not helping to develop drivers, say N. config MMIOTRACE_TEST -- cgit v1.2.3 From 0663bb6cd9a457fbd8ca95c627bb762d07321a39 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 12 May 2008 21:20:59 +0200 Subject: mmiotrace: fix printk format Fix gcc printk format warnings: next-20080415/arch/x86/mm/mmio-mod.c: In function 'print_pte': next-20080415/arch/x86/mm/mmio-mod.c:154: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'pteval_t' next-20080415/arch/x86/mm/mmio-mod.c:154: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'pteval_t' next-20080415/arch/x86/mm/mmio-mod.c: At top level: next-20080415/arch/x86/mm/mmio-mod.c:403: warning: 'downed_cpus' defined but not used Signed-off-by: Randy Dunlap Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/mmio-mod.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index ab2bb776d310..6d6cac84c045 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -150,8 +150,9 @@ static void print_pte(unsigned long address) "0x%08lx\n", address); BUG(); } - pr_info(NAME "pte for 0x%lx: 0x%lx 0x%lx\n", address, pte_val(*pte), - pte_val(*pte) & _PAGE_PRESENT); + pr_info(NAME "pte for 0x%lx: 0x%llx 0x%llx\n", address, + (unsigned long long)pte_val(*pte), + (unsigned long long)pte_val(*pte) & _PAGE_PRESENT); } /* -- cgit v1.2.3 From 37b3619257d3190f47f233d7ed626d4b9916462c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 12 May 2008 21:20:59 +0200 Subject: x86/mmiotrace: uses/depends on PCI Don't try to build mmiotrace when CONFIG_PCI=n. next-20080416/kernel/trace/trace_mmiotrace.c: In function 'mmio_print_pcidev': next-20080416/kernel/trace/trace_mmiotrace.c:62: error: implicit declaration of function 'pci_dev_driver' Signed-off-by: Randy Dunlap Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig.debug | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index b28ace2be1a3..1e53df0ba08c 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -173,7 +173,7 @@ config MMIOTRACE_HOOKS config MMIOTRACE bool "Memory mapped IO tracing" - depends on DEBUG_KERNEL + depends on DEBUG_KERNEL && PCI select TRACING select MMIOTRACE_HOOKS default y @@ -181,7 +181,7 @@ config MMIOTRACE Mmiotrace traces Memory Mapped I/O access and is meant for debugging and reverse engineering. It is called from the ioremap implementation and works via page faults. Tracing is disabled by - default and can be enabled run-time. + default and can be enabled at run-time. See Documentation/tracers/mmiotrace.txt. If you are not helping to develop drivers, say N. -- cgit v1.2.3 From 7423d1115f18627666d475fccc7c62394406ff8c Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:02 +0200 Subject: x86 mmiotrace: dynamically disable non-boot CPUs From 8979ee55cb6a429c4edd72ebec2244b849f6a79a Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Sat, 12 Apr 2008 00:18:57 +0300 Mmiotrace is not reliable with multiple CPUs and may miss events. Drop to single CPU when mmiotrace is activated. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- arch/x86/mm/mmio-mod.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 6d6cac84c045..1f77d8532037 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -32,6 +32,7 @@ #include /* for ISA_START_ADDRESS */ #include #include +#include #include "pf_in.h" @@ -400,6 +401,64 @@ static void clear_trace_list(void) } } +#ifdef CONFIG_HOTPLUG_CPU +static cpumask_t downed_cpus; + +static void enter_uniprocessor(void) +{ + int cpu; + int err; + + get_online_cpus(); + downed_cpus = cpu_online_map; + cpu_clear(first_cpu(cpu_online_map), downed_cpus); + if (num_online_cpus() > 1) + pr_notice(NAME "Disabling non-boot CPUs...\n"); + put_online_cpus(); + + for_each_cpu_mask(cpu, downed_cpus) { + err = cpu_down(cpu); + if (!err) { + pr_info(NAME "CPU%d is down.\n", cpu); + } else { + pr_err(NAME "Error taking CPU%d down: %d\n", cpu, err); + } + } + if (num_online_cpus() > 1) + pr_warning(NAME "multiple CPUs still online, " + "may miss events.\n"); +} + +static void leave_uniprocessor(void) +{ + int cpu; + int err; + + if (cpus_weight(downed_cpus) == 0) + return; + pr_notice(NAME "Re-enabling CPUs...\n"); + for_each_cpu_mask(cpu, downed_cpus) { + err = cpu_up(cpu); + if (!err) + pr_info(NAME "enabled CPU%d.\n", cpu); + else + pr_err(NAME "cannot re-enable CPU%d: %d\n", cpu, err); + } +} + +#else /* !CONFIG_HOTPLUG_CPU */ +static void enter_uniprocessor(void) +{ + if (num_online_cpus() > 1) + pr_warning(NAME "multiple CPUs are online, may miss events. " + "Suggest booting with maxcpus=1 kernel argument.\n"); +} + +static void leave_uniprocessor(void) +{ +} +#endif + #if 0 /* XXX: out of order */ static struct file_operations fops_marker = { .owner = THIS_MODULE, @@ -422,6 +481,7 @@ void enable_mmiotrace(void) if (nommiotrace) pr_info(NAME "MMIO tracing disabled.\n"); + enter_uniprocessor(); spin_lock_irq(&trace_lock); atomic_inc(&mmiotrace_enabled); spin_unlock_irq(&trace_lock); @@ -442,6 +502,7 @@ void disable_mmiotrace(void) spin_unlock_irq(&trace_lock); clear_trace_list(); /* guarantees: no more kmmio callbacks */ + leave_uniprocessor(); if (marker_file) { debugfs_remove(marker_file); marker_file = NULL; -- cgit v1.2.3 From d0a7e8ca5b996d36219e6fc002907291c8ee677b Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:02 +0200 Subject: mmiotrace: print header using the read hook. Now the header is printed only for `trace_pipe' file. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- kernel/trace/trace_mmiotrace.c | 60 +++++++++++++++++++++++++++++++++++++----- 1 file changed, 53 insertions(+), 7 deletions(-) diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c index 79be4a18ec1e..6d2edbdde939 100644 --- a/kernel/trace/trace_mmiotrace.c +++ b/kernel/trace/trace_mmiotrace.c @@ -12,6 +12,10 @@ #include "trace.h" +struct header_iter { + struct pci_dev *dev; +}; + static struct trace_array *mmio_trace_array; static void mmio_reset_data(struct trace_array *tr) @@ -89,17 +93,57 @@ static int mmio_print_pcidev(struct trace_seq *s, const struct pci_dev *dev) return ret; } -/* XXX: This is not called for trace_pipe file! */ -static void mmio_print_header(struct trace_iterator *iter) +static void destroy_header_iter(struct header_iter *hiter) +{ + if (!hiter) + return; + pci_dev_put(hiter->dev); + kfree(hiter); +} + +static void mmio_pipe_open(struct trace_iterator *iter) { + struct header_iter *hiter; struct trace_seq *s = &iter->seq; - struct pci_dev *dev = NULL; trace_seq_printf(s, "VERSION 20070824\n"); - for_each_pci_dev(dev) - mmio_print_pcidev(s, dev); - /* XXX: return value? What if header is very long? */ + hiter = kzalloc(sizeof(*hiter), GFP_KERNEL); + if (!hiter) + return; + + hiter->dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); + iter->private = hiter; +} + +/* XXX: This is not called when the pipe is closed! */ +static void mmio_close(struct trace_iterator *iter) +{ + struct header_iter *hiter = iter->private; + destroy_header_iter(hiter); + iter->private = NULL; +} + +static ssize_t mmio_read(struct trace_iterator *iter, struct file *filp, + char __user *ubuf, size_t cnt, loff_t *ppos) +{ + ssize_t ret; + struct header_iter *hiter = iter->private; + struct trace_seq *s = &iter->seq; + + if (!hiter) + return 0; + + mmio_print_pcidev(s, hiter->dev); + hiter->dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, hiter->dev); + + if (!hiter->dev) { + destroy_header_iter(hiter); + iter->private = NULL; + } + + ret = trace_seq_to_user(s, ubuf, cnt); + return (ret == -EBUSY) ? 0 : ret; } static int mmio_print_rw(struct trace_iterator *iter) @@ -190,7 +234,9 @@ static struct tracer mmio_tracer __read_mostly = .name = "mmiotrace", .init = mmio_trace_init, .reset = mmio_trace_reset, - .open = mmio_print_header, + .pipe_open = mmio_pipe_open, + .close = mmio_close, + .read = mmio_read, .ctrl_update = mmio_trace_ctrl_update, .print_line = mmio_print_line, }; -- cgit v1.2.3 From 2039238b79b51a50f8477f53f33750e1c3fc146a Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:02 +0200 Subject: mmiotrace: print overrun counts Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- kernel/trace/trace_mmiotrace.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c index 6d2edbdde939..d0f649a2203d 100644 --- a/kernel/trace/trace_mmiotrace.c +++ b/kernel/trace/trace_mmiotrace.c @@ -17,11 +17,13 @@ struct header_iter { }; static struct trace_array *mmio_trace_array; +static bool overrun_detected; static void mmio_reset_data(struct trace_array *tr) { int cpu; + overrun_detected = false; tr->time_start = ftrace_now(tr->cpu); for_each_online_cpu(cpu) @@ -124,12 +126,34 @@ static void mmio_close(struct trace_iterator *iter) iter->private = NULL; } +static unsigned long count_overruns(struct trace_iterator *iter) +{ + int cpu; + unsigned long cnt = 0; + for_each_online_cpu(cpu) { + cnt += iter->overrun[cpu]; + iter->overrun[cpu] = 0; + } + return cnt; +} + static ssize_t mmio_read(struct trace_iterator *iter, struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos) { ssize_t ret; struct header_iter *hiter = iter->private; struct trace_seq *s = &iter->seq; + unsigned long n; + + n = count_overruns(iter); + if (n) { + /* XXX: This is later than where events were lost. */ + trace_seq_printf(s, "MARK 0.000000 Lost %lu events.\n", n); + if (!overrun_detected) + pr_warning("mmiotrace has lost events.\n"); + overrun_detected = true; + goto print_out; + } if (!hiter) return 0; @@ -142,6 +166,7 @@ static ssize_t mmio_read(struct trace_iterator *iter, struct file *filp, iter->private = NULL; } +print_out: ret = trace_seq_to_user(s, ubuf, cnt); return (ret == -EBUSY) ? 0 : ret; } -- cgit v1.2.3 From e0fd5c2fa188311667267c02a702ae699a9fc2bd Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:02 +0200 Subject: mmiotrace: do not print bogus pid for maps either Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- kernel/trace/trace_mmiotrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c index d0f649a2203d..3c1dacdc2d85 100644 --- a/kernel/trace/trace_mmiotrace.c +++ b/kernel/trace/trace_mmiotrace.c @@ -225,12 +225,12 @@ static int mmio_print_map(struct trace_iterator *iter) ret = trace_seq_printf(s, "MAP %lu.%06lu %d 0x%lx 0x%lx 0x%lx 0x%lx %d\n", secs, usec_rem, m->map_id, m->phys, m->virt, m->len, - 0UL, entry->pid); + 0UL, 0); break; case MMIO_UNPROBE: ret = trace_seq_printf(s, "UNMAP %lu.%06lu %d 0x%lx %d\n", - secs, usec_rem, m->map_id, 0UL, entry->pid); + secs, usec_rem, m->map_id, 0UL, 0); break; default: ret = trace_seq_printf(s, "map what?\n"); -- cgit v1.2.3 From 6f6f394d9ca61fcc73ecfd2f2bf58e92dc1ab269 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:03 +0200 Subject: doc: update mmiotrace doc to current status Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- Documentation/tracers/mmiotrace.txt | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/tracers/mmiotrace.txt index 84246f703875..a4afb560a45b 100644 --- a/Documentation/tracers/mmiotrace.txt +++ b/Documentation/tracers/mmiotrace.txt @@ -25,7 +25,8 @@ Mmiotrace feature is compiled in by the CONFIG_MMIOTRACE option. Tracing is disabled by default, so it is safe to have this set to yes. SMP systems are supported, but tracing is unreliable and may miss events if more than one CPU is on-line, therefore mmiotrace takes all but one CPU off-line during run-time -activation [not implemented]. +activation. You can re-enable CPUs by hand, but you have been warned, there +is no way to automatically detect if you are losing events due to CPUs racing. Usage Quick Reference @@ -37,7 +38,7 @@ $ cat /debug/tracing/trace_pipe > mydump.txt & Start X or whatever. $ echo "X is up" > /debug/tracing/marker $ echo none > /debug/tracing/current_tracer -Check kernel log. +Check for lost events. Usage @@ -67,12 +68,22 @@ do. Shut down mmiotrace (requires root privileges): $ echo none > /debug/tracing/current_tracer -The 'cat' process exits. If it does not, kill it by 'fg' and pressing ctrl+c. - -[This feature is not implemented yet!] -Check your kernel log. If there are messages about mmiotrace losing events, -this is due to buffer overrun, and the trace is incomplete. You should enlarge -the buffers and try again. [How?] +The 'cat' process exits. If it does not, kill it by issuing 'fg' command and +pressing ctrl+c. + +Check that mmiotrace did not lose events due to a buffer filling up. Either +$ grep -i lost mydump.txt +which tells you exactly how many events were lost, or use +$ dmesg +to view your kernel log and look for "mmiotrace has lost events" warning. If +events were lost, the trace is incomplete. You should enlarge the buffers and +try again. Buffers are enlarged by first seeing how large the current buffers +are: +$ cat /debug/tracing/trace_entries +gives you a number. Approximately double this number and write it back, for +instance: +$ echo 128000 > /debug/tracing/trace_entries +Then start again from the top. If you are doing a trace for a driver project, e.g. Nouveau, you should also do the following before sending your results: -- cgit v1.2.3 From 970e6fa03885f32cc43e42cb08c73a5f54cd8bd9 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:03 +0200 Subject: mmiotrace: code style cleanups From c2da03771e29159627c5c7b9509ec70bce9f91ee Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 28 Apr 2008 21:25:22 +0300 Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- arch/x86/mm/kmmio.c | 4 ++-- arch/x86/mm/mmio-mod.c | 7 +++---- arch/x86/mm/testmmiotrace.c | 2 +- include/linux/mmiotrace.h | 6 +----- 4 files changed, 7 insertions(+), 12 deletions(-) diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 3ad27b8504a5..6a92d9111b64 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -17,10 +17,10 @@ #include #include #include -#include +#include #include #include -#include +#include #include #include diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 1f77d8532037..a8d2a0019da4 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include #include @@ -418,11 +418,10 @@ static void enter_uniprocessor(void) for_each_cpu_mask(cpu, downed_cpus) { err = cpu_down(cpu); - if (!err) { + if (!err) pr_info(NAME "CPU%d is down.\n", cpu); - } else { + else pr_err(NAME "Error taking CPU%d down: %d\n", cpu, err); - } } if (num_online_cpus() > 1) pr_warning(NAME "multiple CPUs still online, " diff --git a/arch/x86/mm/testmmiotrace.c b/arch/x86/mm/testmmiotrace.c index cfa60b227c8d..d877c5b423ef 100644 --- a/arch/x86/mm/testmmiotrace.c +++ b/arch/x86/mm/testmmiotrace.c @@ -2,7 +2,7 @@ * Written by Pekka Paalanen, 2008 */ #include -#include +#include #define MODULE_NAME "testmmiotrace" diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h index dd6b64b160fc..de8e91258da7 100644 --- a/include/linux/mmiotrace.h +++ b/include/linux/mmiotrace.h @@ -1,9 +1,7 @@ #ifndef MMIOTRACE_H #define MMIOTRACE_H -#include - -#ifdef __KERNEL__ +#include #include @@ -84,6 +82,4 @@ extern void disable_mmiotrace(void); extern void mmio_trace_rw(struct mmiotrace_rw *rw); extern void mmio_trace_mapping(struct mmiotrace_map *map); -#endif /* __KERNEL__ */ - #endif /* MMIOTRACE_H */ -- cgit v1.2.3 From 87e547fe41a8b57d6d80afc67a0031fbe477eb0d Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:03 +0200 Subject: x86 mmiotrace: fix page-unaligned ioremaps mmiotrace_ioremap() expects to receive the original unaligned map phys address and size. Also fix {un,}register_kmmio_probe() to deal properly with unaligned size. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- arch/x86/mm/ioremap.c | 4 +++- arch/x86/mm/kmmio.c | 13 +++++++++++-- arch/x86/mm/mmio-mod.c | 1 + 3 files changed, 15 insertions(+), 3 deletions(-) diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 8927c878544d..a7c80a6e8622 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -123,6 +123,8 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, { unsigned long pfn, offset, vaddr; resource_size_t last_addr; + const resource_size_t unaligned_phys_addr = phys_addr; + const unsigned long unaligned_size = size; struct vm_struct *area; unsigned long new_prot_val; pgprot_t prot; @@ -236,7 +238,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, } ret_addr = (void __iomem *) (vaddr + offset); - mmiotrace_ioremap(phys_addr, size, ret_addr); + mmiotrace_ioremap(unaligned_phys_addr, unaligned_size, ret_addr); return ret_addr; } diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 6a92d9111b64..93b1797666cb 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -351,11 +351,19 @@ static void release_kmmio_fault_page(unsigned long page, } } +/* + * With page-unaligned ioremaps, one or two armed pages may contain + * addresses from outside the intended mapping. Events for these addresses + * are currently silently dropped. The events may result only from programming + * mistakes by accessing addresses before the beginning or past the end of a + * mapping. + */ int register_kmmio_probe(struct kmmio_probe *p) { unsigned long flags; int ret = 0; unsigned long size = 0; + const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK); spin_lock_irqsave(&kmmio_lock, flags); if (get_kmmio_probe(p->addr)) { @@ -364,7 +372,7 @@ int register_kmmio_probe(struct kmmio_probe *p) } kmmio_count++; list_add_rcu(&p->list, &kmmio_probes); - while (size < p->len) { + while (size < size_lim) { if (add_kmmio_fault_page(p->addr + size)) pr_err("kmmio: Unable to set page fault.\n"); size += PAGE_SIZE; @@ -436,11 +444,12 @@ void unregister_kmmio_probe(struct kmmio_probe *p) { unsigned long flags; unsigned long size = 0; + const unsigned long size_lim = p->len + (p->addr & ~PAGE_MASK); struct kmmio_fault_page *release_list = NULL; struct kmmio_delayed_release *drelease; spin_lock_irqsave(&kmmio_lock, flags); - while (size < p->len) { + while (size < size_lim) { release_kmmio_fault_page(p->addr + size, &release_list); size += PAGE_SIZE; } diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index a8d2a0019da4..278998c1998f 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -280,6 +280,7 @@ static void ioremap_trace_core(unsigned long offset, unsigned long size, { static atomic_t next_id; struct remap_trace *trace = kmalloc(sizeof(*trace), GFP_KERNEL); + /* These are page-unaligned. */ struct mmiotrace_map map = { .phys = offset, .virt = (unsigned long)addr, -- cgit v1.2.3 From dee310d0adf41019aca476052ac3085ff286d9be Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:03 +0200 Subject: x86 mmiotrace: use resource_size_t for phys addresses Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- arch/x86/mm/mmio-mod.c | 11 ++++++----- include/linux/mmiotrace.h | 14 +++++++------- kernel/trace/trace_mmiotrace.c | 20 ++++++++++++-------- 3 files changed, 25 insertions(+), 20 deletions(-) diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 278998c1998f..3b04a0126121 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -48,7 +48,7 @@ struct trap_reason { struct remap_trace { struct list_head list; struct kmmio_probe probe; - unsigned long phys; + resource_size_t phys; unsigned long id; }; @@ -275,7 +275,7 @@ static void post(struct kmmio_probe *p, unsigned long condition, put_cpu_var(pf_reason); } -static void ioremap_trace_core(unsigned long offset, unsigned long size, +static void ioremap_trace_core(resource_size_t offset, unsigned long size, void __iomem *addr) { static atomic_t next_id; @@ -319,13 +319,14 @@ not_enabled: spin_unlock_irq(&trace_lock); } -void -mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr) +void mmiotrace_ioremap(resource_size_t offset, unsigned long size, + void __iomem *addr) { if (!is_enabled()) /* recheck and proper locking in *_core() */ return; - pr_debug(NAME "ioremap_*(0x%lx, 0x%lx) = %p\n", offset, size, addr); + pr_debug(NAME "ioremap_*(0x%llx, 0x%lx) = %p\n", + (unsigned long long)offset, size, addr); if ((filter_offset) && (offset != filter_offset)) return; ioremap_trace_core(offset, size, addr); diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h index de8e91258da7..5cbbc374e945 100644 --- a/include/linux/mmiotrace.h +++ b/include/linux/mmiotrace.h @@ -2,7 +2,6 @@ #define MMIOTRACE_H #include - #include struct kmmio_probe; @@ -37,14 +36,15 @@ extern int kmmio_handler(struct pt_regs *regs, unsigned long addr); /* Called from ioremap.c */ #ifdef CONFIG_MMIOTRACE -extern void -mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr); +extern void mmiotrace_ioremap(resource_size_t offset, unsigned long size, + void __iomem *addr); extern void mmiotrace_iounmap(volatile void __iomem *addr); #else -static inline void -mmiotrace_ioremap(unsigned long offset, unsigned long size, void __iomem *addr) +static inline void mmiotrace_ioremap(resource_size_t offset, + unsigned long size, void __iomem *addr) { } + static inline void mmiotrace_iounmap(volatile void __iomem *addr) { } @@ -60,7 +60,7 @@ enum mm_io_opcode { }; struct mmiotrace_rw { - unsigned long phys; /* PCI address of register */ + resource_size_t phys; /* PCI address of register */ unsigned long value; unsigned long pc; /* optional program counter */ int map_id; @@ -69,7 +69,7 @@ struct mmiotrace_rw { }; struct mmiotrace_map { - unsigned long phys; /* base address in PCI space */ + resource_size_t phys; /* base address in PCI space */ unsigned long virt; /* base virtual address */ unsigned long len; /* mapping size */ int map_id; diff --git a/kernel/trace/trace_mmiotrace.c b/kernel/trace/trace_mmiotrace.c index 3c1dacdc2d85..b13dc19dcbb4 100644 --- a/kernel/trace/trace_mmiotrace.c +++ b/kernel/trace/trace_mmiotrace.c @@ -184,20 +184,23 @@ static int mmio_print_rw(struct trace_iterator *iter) switch (entry->mmiorw.opcode) { case MMIO_READ: ret = trace_seq_printf(s, - "R %d %lu.%06lu %d 0x%lx 0x%lx 0x%lx %d\n", - rw->width, secs, usec_rem, rw->map_id, rw->phys, + "R %d %lu.%06lu %d 0x%llx 0x%lx 0x%lx %d\n", + rw->width, secs, usec_rem, rw->map_id, + (unsigned long long)rw->phys, rw->value, rw->pc, 0); break; case MMIO_WRITE: ret = trace_seq_printf(s, - "W %d %lu.%06lu %d 0x%lx 0x%lx 0x%lx %d\n", - rw->width, secs, usec_rem, rw->map_id, rw->phys, + "W %d %lu.%06lu %d 0x%llx 0x%lx 0x%lx %d\n", + rw->width, secs, usec_rem, rw->map_id, + (unsigned long long)rw->phys, rw->value, rw->pc, 0); break; case MMIO_UNKNOWN_OP: ret = trace_seq_printf(s, - "UNKNOWN %lu.%06lu %d 0x%lx %02x,%02x,%02x 0x%lx %d\n", - secs, usec_rem, rw->map_id, rw->phys, + "UNKNOWN %lu.%06lu %d 0x%llx %02x,%02x,%02x 0x%lx %d\n", + secs, usec_rem, rw->map_id, + (unsigned long long)rw->phys, (rw->value >> 16) & 0xff, (rw->value >> 8) & 0xff, (rw->value >> 0) & 0xff, rw->pc, 0); break; @@ -223,8 +226,9 @@ static int mmio_print_map(struct trace_iterator *iter) switch (entry->mmiorw.opcode) { case MMIO_PROBE: ret = trace_seq_printf(s, - "MAP %lu.%06lu %d 0x%lx 0x%lx 0x%lx 0x%lx %d\n", - secs, usec_rem, m->map_id, m->phys, m->virt, m->len, + "MAP %lu.%06lu %d 0x%llx 0x%lx 0x%lx 0x%lx %d\n", + secs, usec_rem, m->map_id, + (unsigned long long)m->phys, m->virt, m->len, 0UL, 0); break; case MMIO_UNPROBE: -- cgit v1.2.3 From a50445d76c22a34ae149704ea5adaef171c8acb7 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:03 +0200 Subject: mmiotrace: rename kmmio_probe::user_data to :private. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- arch/x86/mm/mmio-mod.c | 4 ++-- include/linux/mmiotrace.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 3b04a0126121..ed0e0e90b3ef 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -191,7 +191,7 @@ static void pre(struct kmmio_probe *p, struct pt_regs *regs, struct mmiotrace_rw *my_trace = &get_cpu_var(cpu_trace); const unsigned long instptr = instruction_pointer(regs); const enum reason_type type = get_ins_type(instptr); - struct remap_trace *trace = p->user_data; + struct remap_trace *trace = p->private; /* it doesn't make sense to have more than one active trace per cpu */ if (my_reason->active_traces) @@ -299,7 +299,7 @@ static void ioremap_trace_core(resource_size_t offset, unsigned long size, .len = size, .pre_handler = pre, .post_handler = post, - .user_data = trace + .private = trace }, .phys = offset, .id = atomic_inc_return(&next_id) diff --git a/include/linux/mmiotrace.h b/include/linux/mmiotrace.h index 5cbbc374e945..61d19e1b7a0b 100644 --- a/include/linux/mmiotrace.h +++ b/include/linux/mmiotrace.h @@ -18,7 +18,7 @@ struct kmmio_probe { unsigned long len; /* length of the probe region */ kmmio_pre_handler_t pre_handler; /* Called before addr is executed. */ kmmio_post_handler_t post_handler; /* Called after addr is executed */ - void *user_data; + void *private; }; /* kmmio is active by some kmmio_probes? */ -- cgit v1.2.3 From 790e2a290b499b0400254e6870ec27969065d122 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 12 May 2008 21:21:14 +0200 Subject: x86 mmiotrace: page level is unsigned Fixes some sparse warnings. Signed-off-by: Pekka Paalanen Signed-off-by: Ingo Molnar --- arch/x86/mm/kmmio.c | 13 +++++++------ arch/x86/mm/mmio-mod.c | 2 +- 2 files changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 93b1797666cb..b65871e6bba6 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -104,11 +104,12 @@ static struct kmmio_fault_page *get_kmmio_fault_page(unsigned long page) return NULL; } -static void set_page_present(unsigned long addr, bool present, int *pglevel) +static void set_page_present(unsigned long addr, bool present, + unsigned int *pglevel) { pteval_t pteval; pmdval_t pmdval; - int level; + unsigned int level; pmd_t *pmd; pte_t *pte = lookup_address(addr, &level); @@ -145,15 +146,15 @@ static void set_page_present(unsigned long addr, bool present, int *pglevel) } /** Mark the given page as not present. Access to it will trigger a fault. */ -static void arm_kmmio_fault_page(unsigned long page, int *page_level) +static void arm_kmmio_fault_page(unsigned long page, unsigned int *pglevel) { - set_page_present(page & PAGE_MASK, false, page_level); + set_page_present(page & PAGE_MASK, false, pglevel); } /** Mark the given page as present. */ -static void disarm_kmmio_fault_page(unsigned long page, int *page_level) +static void disarm_kmmio_fault_page(unsigned long page, unsigned int *pglevel) { - set_page_present(page & PAGE_MASK, true, page_level); + set_page_present(page & PAGE_MASK, true, pglevel); } /* diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index ed0e0e90b3ef..e7397e108beb 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -137,7 +137,7 @@ static ssize_t write_marker(struct file *file, const char __user *buffer, static void print_pte(unsigned long address) { - int level; + unsigned int level; pte_t *pte = lookup_address(address, &level); if (!pte) { -- cgit v1.2.3 From 4d2df795f0c3eb91f97a666f47716121a2f166ed Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 15:00:46 +0200 Subject: sysprof: make it depend on X86 Signed-off-by: Thomas Gleixner --- kernel/trace/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index e101c9a85f0f..263e9e6bbd60 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -77,7 +77,7 @@ config PREEMPT_TRACER config SYSPROF_TRACER bool "Sysprof Tracer" - depends on DEBUG_KERNEL + depends on X86 select TRACING help This tracer provides the trace needed by the 'Sysprof' userspace -- cgit v1.2.3 From 40bd21740012132afb62d78ac3e6b82372b2fbc2 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:44:02 +0200 Subject: x86: automatical unification of i8259.c Make conversion of i8259 very mechanical -- i8259 was generated by --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/i8259.c | 368 +++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/i8259_32.c | 295 ------------------------------------ arch/x86/kernel/i8259_64.c | 309 ------------------------------------- include/asm-x86/i8259.h | 2 + 5 files changed, 371 insertions(+), 605 deletions(-) create mode 100644 arch/x86/kernel/i8259.c diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..f71a76ef2596 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c new file mode 100644 index 000000000000..2decba6b0101 --- /dev/null +++ b/arch/x86/kernel/i8259.c @@ -0,0 +1,368 @@ +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#include +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#ifndef CONFIG_X86_64 +#include +#else /* CONFIG_X86_64 */ +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#ifndef CONFIG_X86_64 +#include +#endif /* ! CONFIG_X86_64 */ +#include + +/* + * This is the 'legacy' 8259A Programmable Interrupt Controller, + * present in the majority of PC/AT boxes. + * plus some generic x86 specific things if generic specifics makes + * any sense at all. + */ + +static int i8259A_auto_eoi; +DEFINE_SPINLOCK(i8259A_lock); +static void mask_and_ack_8259A(unsigned int); + +struct irq_chip i8259A_chip = { + .name = "XT-PIC", + .mask = disable_8259A_irq, + .disable = disable_8259A_irq, + .unmask = enable_8259A_irq, + .mask_ack = mask_and_ack_8259A, +}; + +/* + * 8259A PIC functions to handle ISA devices: + */ + +/* + * This contains the irq mask for both 8259A irq controllers, + */ +unsigned int cached_irq_mask = 0xffff; + +/* + * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) + * boards the timer interrupt is not really connected to any IO-APIC pin, + * it's fed to the master 8259A's IR0 line only. + * + * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. + * this 'mixed mode' IRQ handling costs nothing because it's only used + * at IRQ setup time. + */ +unsigned long io_apic_irqs; + +void disable_8259A_irq(unsigned int irq) +{ + unsigned int mask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask |= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +void enable_8259A_irq(unsigned int irq) +{ + unsigned int mask = ~(1 << irq); + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask &= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +int i8259A_irq_pending(unsigned int irq) +{ + unsigned int mask = 1<> 8); + spin_unlock_irqrestore(&i8259A_lock, flags); + + return ret; +} + +void make_8259A_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + io_apic_irqs &= ~(1<> 8); + outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + return value; +} + +/* + * Careful! The 8259A is a fragile beast, it pretty + * much _has_ to be done exactly like this (mask it + * first, _then_ send the EOI, and the order of EOI + * to the two 8259s is important! + */ +static void mask_and_ack_8259A(unsigned int irq) +{ + unsigned int irqmask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + /* + * Lightweight spurious IRQ detection. We do not want + * to overdo spurious IRQ handling - it's usually a sign + * of hardware problems, so we only do the checks we can + * do without slowing down good hardware unnecessarily. + * + * Note that IRQ7 and IRQ15 (the two spurious IRQs + * usually resulting from the 8259A-1|2 PICs) occur + * even if the IRQ is masked in the 8259A. Thus we + * can check spurious 8259A IRQs without doing the + * quite slow i8259A_irq_real() call for every IRQ. + * This does not cover 100% of spurious interrupts, + * but should be enough to warn the user that there + * is something bad going on ... + */ + if (cached_irq_mask & irqmask) + goto spurious_8259A_irq; + cached_irq_mask |= irqmask; + +handle_real_irq: + if (irq & 8) { + inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ + outb(cached_slave_mask, PIC_SLAVE_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to slave */ + outb(0x60+(irq&7),PIC_SLAVE_CMD); + /* 'Specific EOI' to master-IRQ2 */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } else { + inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ + outb(cached_master_mask, PIC_MASTER_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to master */ + outb(0x60+irq,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } + spin_unlock_irqrestore(&i8259A_lock, flags); + return; + +spurious_8259A_irq: + /* + * this is the slow path - should happen rarely. + */ + if (i8259A_irq_real(irq)) + /* + * oops, the IRQ _is_ in service according to the + * 8259A - not spurious, go handle it. + */ + goto handle_real_irq; + + { + static int spurious_irq_mask; + /* + * At this point we can be sure the IRQ is spurious, + * lets ACK and report it. [once per IRQ] + */ + if (!(spurious_irq_mask & irqmask)) { +#ifndef CONFIG_X86_64 + printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); +#else /* CONFIG_X86_64 */ + printk(KERN_DEBUG + "spurious 8259A interrupt: IRQ%d.\n", irq); +#endif /* CONFIG_X86_64 */ + spurious_irq_mask |= irqmask; + } + atomic_inc(&irq_err_count); + /* + * Theoretically we do not have to handle this IRQ, + * but in Linux this does not cause problems and is + * simpler for us. + */ + goto handle_real_irq; + } +} + +static char irq_trigger[2]; +/** + * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ + */ +static void restore_ELCR(char *trigger) +{ + outb(trigger[0], 0x4d0); + outb(trigger[1], 0x4d1); +} + +static void save_ELCR(char *trigger) +{ + /* IRQ 0,1,2,8,13 are marked as reserved */ + trigger[0] = inb(0x4d0) & 0xF8; + trigger[1] = inb(0x4d1) & 0xDE; +} + +static int i8259A_resume(struct sys_device *dev) +{ + init_8259A(i8259A_auto_eoi); + restore_ELCR(irq_trigger); + return 0; +} + +static int i8259A_suspend(struct sys_device *dev, pm_message_t state) +{ + save_ELCR(irq_trigger); + return 0; +} + +static int i8259A_shutdown(struct sys_device *dev) +{ + /* Put the i8259A into a quiescent state that + * the kernel initialization code can get it + * out of. + */ + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ + return 0; +} + +static struct sysdev_class i8259_sysdev_class = { + .name = "i8259", + .suspend = i8259A_suspend, + .resume = i8259A_resume, + .shutdown = i8259A_shutdown, +}; + +static struct sys_device device_i8259A = { + .id = 0, + .cls = &i8259_sysdev_class, +}; + +static int __init i8259A_init_sysfs(void) +{ + int error = sysdev_class_register(&i8259_sysdev_class); + if (!error) + error = sysdev_register(&device_i8259A); + return error; +} + +device_initcall(i8259A_init_sysfs); + +void init_8259A(int auto_eoi) +{ + unsigned long flags; + + i8259A_auto_eoi = auto_eoi; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ + + /* + * outb_pic - this has to work on a wide range of PC hardware. + */ + outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ + outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ + outb_pic(0x04, PIC_MASTER_IMR); +#endif /* CONFIG_X86_64 */ + if (auto_eoi) /* master does Auto EOI */ + outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); + else /* master expects normal EOI */ + outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); + + outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); + /* 8259A-2 is a slave on master's IR2 */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); + /* (slave's support for AEOI in flat mode is to be investigated) */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); + +#endif /* CONFIG_X86_64 */ + if (auto_eoi) + /* + * In AEOI mode we just have to mask the interrupt + * when acking. + */ + i8259A_chip.mask_ack = disable_8259A_irq; + else + i8259A_chip.mask_ack = mask_and_ack_8259A; + + udelay(100); /* wait for 8259A to initialize */ + + outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ + outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c index fe631967d625..d66914287ee1 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259_32.c @@ -21,302 +21,7 @@ #include #include -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ - outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} /* * Note that on a 486, we don't want to do a SIGFPE on an irq13 diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index fa57a1568508..a95d2bd27e9d 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -87,315 +87,6 @@ static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = #undef IRQ #undef IRQLIST_16 -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - * this file should become arch/i386/kernel/irq.c when the old irq.c - * moves to arch independent land - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); - /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG - "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); - /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); - /* 8259A-2 is a slave on master's IR2 */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); - /* (slave's support for AEOI in flat mode is to be investigated) */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); - - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - diff --git a/include/asm-x86/i8259.h b/include/asm-x86/i8259.h index 45d4df3e51e6..2f98df91f1f2 100644 --- a/include/asm-x86/i8259.h +++ b/include/asm-x86/i8259.h @@ -55,4 +55,6 @@ static inline void outb_pic(unsigned char value, unsigned int port) udelay(2); } +extern struct irq_chip i8259A_chip; + #endif /* __ASM_I8259_H__ */ -- cgit v1.2.3 From 6b4d3afbe722ee71b8da346c2c4393938440c471 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:47:24 +0200 Subject: x86: i8259.c: remove #ifdefs around includes Remove #ifdefs around includes; including too much should be always safe. Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 2decba6b0101..8b7eb0cb2e7e 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -1,14 +1,10 @@ -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include #include #include -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include @@ -16,24 +12,17 @@ #include #include -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include -#ifndef CONFIG_X86_64 #include -#else /* CONFIG_X86_64 */ #include -#endif /* CONFIG_X86_64 */ #include #include #include #include -#ifndef CONFIG_X86_64 #include -#endif /* ! CONFIG_X86_64 */ #include /* -- cgit v1.2.3 From 4f6f3bac18c80ff6cf072d90796755c69cc4c748 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:52:52 +0200 Subject: x86: i8259.c: remove trivial ifdefs Remove #ifdefs where the only difference is formatting of comments. Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 20 +++----------------- 1 file changed, 3 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 8b7eb0cb2e7e..433e49edfd4f 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -175,24 +175,14 @@ handle_real_irq: if (irq & 8) { inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ outb(cached_slave_mask, PIC_SLAVE_IMR); -#ifndef CONFIG_X86_64 - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ -#else /* CONFIG_X86_64 */ /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); + outb(0x60+(irq&7), PIC_SLAVE_CMD); /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); -#endif /* CONFIG_X86_64 */ + outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); } else { inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ outb(cached_master_mask, PIC_MASTER_IMR); -#ifndef CONFIG_X86_64 - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ -#else /* CONFIG_X86_64 */ - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); -#endif /* CONFIG_X86_64 */ + outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ } spin_unlock_irqrestore(&i8259A_lock, flags); return; @@ -215,12 +205,8 @@ spurious_8259A_irq: * lets ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { -#ifndef CONFIG_X86_64 - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); -#else /* CONFIG_X86_64 */ printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); -#endif /* CONFIG_X86_64 */ spurious_irq_mask |= irqmask; } atomic_inc(&irq_err_count); -- cgit v1.2.3 From 4d9a6e6128dd8ada0d2feed2a9bb6506043e4655 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:57:52 +0200 Subject: x86: i8259: cleanup codingstyle Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 433e49edfd4f..7a0fda8f01b5 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -129,14 +129,14 @@ static inline int i8259A_irq_real(unsigned int irq) int irqmask = 1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */ return value; } -- cgit v1.2.3 From f20b11e716936f85850654c49e06a1f955b9e5fc Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 15:59:58 +0200 Subject: x86: rename the i8259_32/64.c leftovers to initirq_32/64.c The leftovers of the i8259 unification have nothing to do with i8259 at all. They contain interrupt init code and the i8259_xx name is just misleading now. Rename them to initirq_32/64.c Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/i8259_32.c | 114 ------------------------ arch/x86/kernel/i8259_64.c | 203 ------------------------------------------- arch/x86/kernel/irqinit_32.c | 114 ++++++++++++++++++++++++ arch/x86/kernel/irqinit_64.c | 203 +++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 318 insertions(+), 318 deletions(-) delete mode 100644 arch/x86/kernel/i8259_32.c delete mode 100644 arch/x86/kernel/i8259_64.c create mode 100644 arch/x86/kernel/irqinit_32.c create mode 100644 arch/x86/kernel/irqinit_64.c diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index f71a76ef2596..2a53ad2cb450 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o irqinit_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c deleted file mode 100644 index d66914287ee1..000000000000 --- a/arch/x86/kernel/i8259_32.c +++ /dev/null @@ -1,114 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - - -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ - - -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - extern void math_error(void __user *); - outb(0,0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->ip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { - .handler = math_error_irq, - .mask = CPU_MASK_NONE, - .name = "fpu", -}; - -void __init init_ISA_irqs (void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); -#endif - init_8259A(0); - - /* - * 16 old-style INTA-cycle interrupts: - */ - for (i = 0; i < 16; i++) { - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - /* all the set up before the call gates are initialised */ - pre_intr_init_hook(); - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (i >= NR_IRQS) - break; - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (!test_bit(vector, used_vectors)) - set_intr_gate(vector, interrupt[i]); - } - - /* setup after call gates are initialised (usually add in - * the architecture specific gates) - */ - intr_init_hook(); - - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -} diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c deleted file mode 100644 index a95d2bd27e9d..000000000000 --- a/arch/x86/kernel/i8259_64.c +++ /dev/null @@ -1,203 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Common place to define all x86 IRQ vectors - * - * This builds up the IRQ handler stubs using some ugly macros in irq.h - * - * These macros create the low-level assembly IRQ routines that save - * register context and call do_IRQ(). do_IRQ() then does all the - * operations that are needed to keep the AT (or SMP IOAPIC) - * interrupt-controller happy. - */ - -#define BI(x,y) \ - BUILD_IRQ(x##y) - -#define BUILD_16_IRQS(x) \ - BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ - BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ - BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ - BI(x,c) BI(x,d) BI(x,e) BI(x,f) - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) -BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) -BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) -BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) - -#undef BUILD_16_IRQS -#undef BI - - -#define IRQ(x,y) \ - IRQ##x##y##_interrupt - -#define IRQLIST_16(x) \ - IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ - IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ - IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ - IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) - -/* for the irq vectors */ -static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { - IRQLIST_16(0x2), IRQLIST_16(0x3), - IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), - IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), - IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) -}; - -#undef IRQ -#undef IRQLIST_16 - - - - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ - -static struct irqaction irq2 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -void __init init_ISA_irqs (void) -{ - int i; - - init_bsp_APIC(); - init_8259A(0); - - for (i = 0; i < NR_IRQS; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - - if (i < 16) { - /* - * 16 old-style INTA-cycle interrupts: - */ - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } else { - /* - * 'high' PCI IRQs filled in on demand - */ - irq_desc[i].chip = &no_irq_chip; - } - } -} - -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - init_ISA_irqs(); - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (vector != IA32_SYSCALL_VECTOR) - set_intr_gate(vector, interrupt[i]); - } - -#ifdef CONFIG_SMP - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); -#endif - set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); - - /* self generated IPI for local APIC timer */ - set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - if (!acpi_ioapic) - setup_irq(2, &irq2); -} diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c new file mode 100644 index 000000000000..d66914287ee1 --- /dev/null +++ b/arch/x86/kernel/irqinit_32.c @@ -0,0 +1,114 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + + +/* + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ + + +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + extern void math_error(void __user *); + outb(0,0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->ip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. + */ +static struct irqaction fpu_irq = { + .handler = math_error_irq, + .mask = CPU_MASK_NONE, + .name = "fpu", +}; + +void __init init_ISA_irqs (void) +{ + int i; + +#ifdef CONFIG_X86_LOCAL_APIC + init_bsp_APIC(); +#endif + init_8259A(0); + + /* + * 16 old-style INTA-cycle interrupts: + */ + for (i = 0; i < 16; i++) { + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } +} + +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + /* all the set up before the call gates are initialised */ + pre_intr_init_hook(); + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (i >= NR_IRQS) + break; + /* SYSCALL_VECTOR was reserved in trap_init. */ + if (!test_bit(vector, used_vectors)) + set_intr_gate(vector, interrupt[i]); + } + + /* setup after call gates are initialised (usually add in + * the architecture specific gates) + */ + intr_init_hook(); + + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +} diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c new file mode 100644 index 000000000000..a95d2bd27e9d --- /dev/null +++ b/arch/x86/kernel/irqinit_64.c @@ -0,0 +1,203 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Common place to define all x86 IRQ vectors + * + * This builds up the IRQ handler stubs using some ugly macros in irq.h + * + * These macros create the low-level assembly IRQ routines that save + * register context and call do_IRQ(). do_IRQ() then does all the + * operations that are needed to keep the AT (or SMP IOAPIC) + * interrupt-controller happy. + */ + +#define BI(x,y) \ + BUILD_IRQ(x##y) + +#define BUILD_16_IRQS(x) \ + BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ + BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ + BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ + BI(x,c) BI(x,d) BI(x,e) BI(x,f) + +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) +BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) +BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) +BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) + +#undef BUILD_16_IRQS +#undef BI + + +#define IRQ(x,y) \ + IRQ##x##y##_interrupt + +#define IRQLIST_16(x) \ + IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ + IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ + IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ + IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) + +/* for the irq vectors */ +static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { + IRQLIST_16(0x2), IRQLIST_16(0x3), + IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), + IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), + IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) +}; + +#undef IRQ +#undef IRQLIST_16 + + + + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ + +static struct irqaction irq2 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; +DEFINE_PER_CPU(vector_irq_t, vector_irq) = { + [0 ... IRQ0_VECTOR - 1] = -1, + [IRQ0_VECTOR] = 0, + [IRQ1_VECTOR] = 1, + [IRQ2_VECTOR] = 2, + [IRQ3_VECTOR] = 3, + [IRQ4_VECTOR] = 4, + [IRQ5_VECTOR] = 5, + [IRQ6_VECTOR] = 6, + [IRQ7_VECTOR] = 7, + [IRQ8_VECTOR] = 8, + [IRQ9_VECTOR] = 9, + [IRQ10_VECTOR] = 10, + [IRQ11_VECTOR] = 11, + [IRQ12_VECTOR] = 12, + [IRQ13_VECTOR] = 13, + [IRQ14_VECTOR] = 14, + [IRQ15_VECTOR] = 15, + [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 +}; + +void __init init_ISA_irqs (void) +{ + int i; + + init_bsp_APIC(); + init_8259A(0); + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + + if (i < 16) { + /* + * 16 old-style INTA-cycle interrupts: + */ + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } else { + /* + * 'high' PCI IRQs filled in on demand + */ + irq_desc[i].chip = &no_irq_chip; + } + } +} + +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + init_ISA_irqs(); + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (vector != IA32_SYSCALL_VECTOR) + set_intr_gate(vector, interrupt[i]); + } + +#ifdef CONFIG_SMP + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + set_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + set_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); +#endif + set_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + set_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); + + /* self generated IPI for local APIC timer */ + set_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + set_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + set_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + if (!acpi_ioapic) + setup_irq(2, &irq2); +} -- cgit v1.2.3 From fce39665abb71d01d74ac74eb13dd69a799dfc2f Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: x86: make init_ISA_irqs() static Moved to i8259 branch to avoid conflicts. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c index a95d2bd27e9d..64bc0f14285f 100644 --- a/arch/x86/kernel/irqinit_64.c +++ b/arch/x86/kernel/irqinit_64.c @@ -120,7 +120,7 @@ DEFINE_PER_CPU(vector_irq_t, vector_irq) = { [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 }; -void __init init_ISA_irqs (void) +static void __init init_ISA_irqs (void) { int i; -- cgit v1.2.3 From 21fd5132b223a10bdf17713dd0bf321cbd6471d2 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:44:02 +0200 Subject: x86: automatical unification of i8259.c Make conversion of i8259 very mechanical -- i8259 was generated by diff -D, with too different parts left in i8259_32 and i8259_64.c. Only "by hand" changes were removal of #ifdef from middle of the comment (prevented compilation) and removal of one static to allow splitting into files. Of course, it will need some cleanups now, and those will follow. Signed-of-by: Pavel Machek --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/i8259.c | 368 +++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/i8259_32.c | 295 ------------------------------------ arch/x86/kernel/i8259_64.c | 309 ------------------------------------- include/asm-x86/i8259.h | 2 + 5 files changed, 371 insertions(+), 605 deletions(-) create mode 100644 arch/x86/kernel/i8259.c diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..f71a76ef2596 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c new file mode 100644 index 000000000000..2decba6b0101 --- /dev/null +++ b/arch/x86/kernel/i8259.c @@ -0,0 +1,368 @@ +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#include +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_X86_64 +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#ifndef CONFIG_X86_64 +#include +#else /* CONFIG_X86_64 */ +#include +#endif /* CONFIG_X86_64 */ +#include +#include +#include +#include +#ifndef CONFIG_X86_64 +#include +#endif /* ! CONFIG_X86_64 */ +#include + +/* + * This is the 'legacy' 8259A Programmable Interrupt Controller, + * present in the majority of PC/AT boxes. + * plus some generic x86 specific things if generic specifics makes + * any sense at all. + */ + +static int i8259A_auto_eoi; +DEFINE_SPINLOCK(i8259A_lock); +static void mask_and_ack_8259A(unsigned int); + +struct irq_chip i8259A_chip = { + .name = "XT-PIC", + .mask = disable_8259A_irq, + .disable = disable_8259A_irq, + .unmask = enable_8259A_irq, + .mask_ack = mask_and_ack_8259A, +}; + +/* + * 8259A PIC functions to handle ISA devices: + */ + +/* + * This contains the irq mask for both 8259A irq controllers, + */ +unsigned int cached_irq_mask = 0xffff; + +/* + * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) + * boards the timer interrupt is not really connected to any IO-APIC pin, + * it's fed to the master 8259A's IR0 line only. + * + * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. + * this 'mixed mode' IRQ handling costs nothing because it's only used + * at IRQ setup time. + */ +unsigned long io_apic_irqs; + +void disable_8259A_irq(unsigned int irq) +{ + unsigned int mask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask |= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +void enable_8259A_irq(unsigned int irq) +{ + unsigned int mask = ~(1 << irq); + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + cached_irq_mask &= mask; + if (irq & 8) + outb(cached_slave_mask, PIC_SLAVE_IMR); + else + outb(cached_master_mask, PIC_MASTER_IMR); + spin_unlock_irqrestore(&i8259A_lock, flags); +} + +int i8259A_irq_pending(unsigned int irq) +{ + unsigned int mask = 1<> 8); + spin_unlock_irqrestore(&i8259A_lock, flags); + + return ret; +} + +void make_8259A_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + io_apic_irqs &= ~(1<> 8); + outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + return value; +} + +/* + * Careful! The 8259A is a fragile beast, it pretty + * much _has_ to be done exactly like this (mask it + * first, _then_ send the EOI, and the order of EOI + * to the two 8259s is important! + */ +static void mask_and_ack_8259A(unsigned int irq) +{ + unsigned int irqmask = 1 << irq; + unsigned long flags; + + spin_lock_irqsave(&i8259A_lock, flags); + /* + * Lightweight spurious IRQ detection. We do not want + * to overdo spurious IRQ handling - it's usually a sign + * of hardware problems, so we only do the checks we can + * do without slowing down good hardware unnecessarily. + * + * Note that IRQ7 and IRQ15 (the two spurious IRQs + * usually resulting from the 8259A-1|2 PICs) occur + * even if the IRQ is masked in the 8259A. Thus we + * can check spurious 8259A IRQs without doing the + * quite slow i8259A_irq_real() call for every IRQ. + * This does not cover 100% of spurious interrupts, + * but should be enough to warn the user that there + * is something bad going on ... + */ + if (cached_irq_mask & irqmask) + goto spurious_8259A_irq; + cached_irq_mask |= irqmask; + +handle_real_irq: + if (irq & 8) { + inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ + outb(cached_slave_mask, PIC_SLAVE_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to slave */ + outb(0x60+(irq&7),PIC_SLAVE_CMD); + /* 'Specific EOI' to master-IRQ2 */ + outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } else { + inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ + outb(cached_master_mask, PIC_MASTER_IMR); +#ifndef CONFIG_X86_64 + outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ +#else /* CONFIG_X86_64 */ + /* 'Specific EOI' to master */ + outb(0x60+irq,PIC_MASTER_CMD); +#endif /* CONFIG_X86_64 */ + } + spin_unlock_irqrestore(&i8259A_lock, flags); + return; + +spurious_8259A_irq: + /* + * this is the slow path - should happen rarely. + */ + if (i8259A_irq_real(irq)) + /* + * oops, the IRQ _is_ in service according to the + * 8259A - not spurious, go handle it. + */ + goto handle_real_irq; + + { + static int spurious_irq_mask; + /* + * At this point we can be sure the IRQ is spurious, + * lets ACK and report it. [once per IRQ] + */ + if (!(spurious_irq_mask & irqmask)) { +#ifndef CONFIG_X86_64 + printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); +#else /* CONFIG_X86_64 */ + printk(KERN_DEBUG + "spurious 8259A interrupt: IRQ%d.\n", irq); +#endif /* CONFIG_X86_64 */ + spurious_irq_mask |= irqmask; + } + atomic_inc(&irq_err_count); + /* + * Theoretically we do not have to handle this IRQ, + * but in Linux this does not cause problems and is + * simpler for us. + */ + goto handle_real_irq; + } +} + +static char irq_trigger[2]; +/** + * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ + */ +static void restore_ELCR(char *trigger) +{ + outb(trigger[0], 0x4d0); + outb(trigger[1], 0x4d1); +} + +static void save_ELCR(char *trigger) +{ + /* IRQ 0,1,2,8,13 are marked as reserved */ + trigger[0] = inb(0x4d0) & 0xF8; + trigger[1] = inb(0x4d1) & 0xDE; +} + +static int i8259A_resume(struct sys_device *dev) +{ + init_8259A(i8259A_auto_eoi); + restore_ELCR(irq_trigger); + return 0; +} + +static int i8259A_suspend(struct sys_device *dev, pm_message_t state) +{ + save_ELCR(irq_trigger); + return 0; +} + +static int i8259A_shutdown(struct sys_device *dev) +{ + /* Put the i8259A into a quiescent state that + * the kernel initialization code can get it + * out of. + */ + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ + return 0; +} + +static struct sysdev_class i8259_sysdev_class = { + .name = "i8259", + .suspend = i8259A_suspend, + .resume = i8259A_resume, + .shutdown = i8259A_shutdown, +}; + +static struct sys_device device_i8259A = { + .id = 0, + .cls = &i8259_sysdev_class, +}; + +static int __init i8259A_init_sysfs(void) +{ + int error = sysdev_class_register(&i8259_sysdev_class); + if (!error) + error = sysdev_register(&device_i8259A); + return error; +} + +device_initcall(i8259A_init_sysfs); + +void init_8259A(int auto_eoi) +{ + unsigned long flags; + + i8259A_auto_eoi = auto_eoi; + + spin_lock_irqsave(&i8259A_lock, flags); + + outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ + outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ + + /* + * outb_pic - this has to work on a wide range of PC hardware. + */ + outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ + outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ + outb_pic(0x04, PIC_MASTER_IMR); +#endif /* CONFIG_X86_64 */ + if (auto_eoi) /* master does Auto EOI */ + outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); + else /* master expects normal EOI */ + outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); + + outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ +#ifndef CONFIG_X86_64 + outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ +#else /* CONFIG_X86_64 */ + /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); + /* 8259A-2 is a slave on master's IR2 */ + outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); + /* (slave's support for AEOI in flat mode is to be investigated) */ + outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); + +#endif /* CONFIG_X86_64 */ + if (auto_eoi) + /* + * In AEOI mode we just have to mask the interrupt + * when acking. + */ + i8259A_chip.mask_ack = disable_8259A_irq; + else + i8259A_chip.mask_ack = mask_and_ack_8259A; + + udelay(100); /* wait for 8259A to initialize */ + + outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ + outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ + + spin_unlock_irqrestore(&i8259A_lock, flags); +} diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c index fe631967d625..d66914287ee1 100644 --- a/arch/x86/kernel/i8259_32.c +++ b/arch/x86/kernel/i8259_32.c @@ -21,302 +21,7 @@ #include #include -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ - outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} /* * Note that on a 486, we don't want to do a SIGFPE on an irq13 diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index 1870e0e86559..b44095efcf83 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -101,315 +101,6 @@ static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = #undef IRQ #undef IRQLIST_16 -/* - * This is the 'legacy' 8259A Programmable Interrupt Controller, - * present in the majority of PC/AT boxes. - * plus some generic x86 specific things if generic specifics makes - * any sense at all. - * this file should become arch/i386/kernel/irq.c when the old irq.c - * moves to arch independent land - */ - -static int i8259A_auto_eoi; -DEFINE_SPINLOCK(i8259A_lock); -static void mask_and_ack_8259A(unsigned int); - -static struct irq_chip i8259A_chip = { - .name = "XT-PIC", - .mask = disable_8259A_irq, - .disable = disable_8259A_irq, - .unmask = enable_8259A_irq, - .mask_ack = mask_and_ack_8259A, -}; - -/* - * 8259A PIC functions to handle ISA devices: - */ - -/* - * This contains the irq mask for both 8259A irq controllers, - */ -unsigned int cached_irq_mask = 0xffff; - -/* - * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) - * boards the timer interrupt is not really connected to any IO-APIC pin, - * it's fed to the master 8259A's IR0 line only. - * - * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. - * this 'mixed mode' IRQ handling costs nothing because it's only used - * at IRQ setup time. - */ -unsigned long io_apic_irqs; - -void disable_8259A_irq(unsigned int irq) -{ - unsigned int mask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask |= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -void enable_8259A_irq(unsigned int irq) -{ - unsigned int mask = ~(1 << irq); - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - cached_irq_mask &= mask; - if (irq & 8) - outb(cached_slave_mask, PIC_SLAVE_IMR); - else - outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); -} - -int i8259A_irq_pending(unsigned int irq) -{ - unsigned int mask = 1<> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); - - return ret; -} - -void make_8259A_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - io_apic_irqs &= ~(1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ - return value; -} - -/* - * Careful! The 8259A is a fragile beast, it pretty - * much _has_ to be done exactly like this (mask it - * first, _then_ send the EOI, and the order of EOI - * to the two 8259s is important! - */ -static void mask_and_ack_8259A(unsigned int irq) -{ - unsigned int irqmask = 1 << irq; - unsigned long flags; - - spin_lock_irqsave(&i8259A_lock, flags); - /* - * Lightweight spurious IRQ detection. We do not want - * to overdo spurious IRQ handling - it's usually a sign - * of hardware problems, so we only do the checks we can - * do without slowing down good hardware unnecessarily. - * - * Note that IRQ7 and IRQ15 (the two spurious IRQs - * usually resulting from the 8259A-1|2 PICs) occur - * even if the IRQ is masked in the 8259A. Thus we - * can check spurious 8259A IRQs without doing the - * quite slow i8259A_irq_real() call for every IRQ. - * This does not cover 100% of spurious interrupts, - * but should be enough to warn the user that there - * is something bad going on ... - */ - if (cached_irq_mask & irqmask) - goto spurious_8259A_irq; - cached_irq_mask |= irqmask; - -handle_real_irq: - if (irq & 8) { - inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ - outb(cached_slave_mask, PIC_SLAVE_IMR); - /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); - /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); - } else { - inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ - outb(cached_master_mask, PIC_MASTER_IMR); - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); - } - spin_unlock_irqrestore(&i8259A_lock, flags); - return; - -spurious_8259A_irq: - /* - * this is the slow path - should happen rarely. - */ - if (i8259A_irq_real(irq)) - /* - * oops, the IRQ _is_ in service according to the - * 8259A - not spurious, go handle it. - */ - goto handle_real_irq; - - { - static int spurious_irq_mask; - /* - * At this point we can be sure the IRQ is spurious, - * lets ACK and report it. [once per IRQ] - */ - if (!(spurious_irq_mask & irqmask)) { - printk(KERN_DEBUG - "spurious 8259A interrupt: IRQ%d.\n", irq); - spurious_irq_mask |= irqmask; - } - atomic_inc(&irq_err_count); - /* - * Theoretically we do not have to handle this IRQ, - * but in Linux this does not cause problems and is - * simpler for us. - */ - goto handle_real_irq; - } -} - -static char irq_trigger[2]; -/** - * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ - */ -static void restore_ELCR(char *trigger) -{ - outb(trigger[0], 0x4d0); - outb(trigger[1], 0x4d1); -} - -static void save_ELCR(char *trigger) -{ - /* IRQ 0,1,2,8,13 are marked as reserved */ - trigger[0] = inb(0x4d0) & 0xF8; - trigger[1] = inb(0x4d1) & 0xDE; -} - -static int i8259A_resume(struct sys_device *dev) -{ - init_8259A(i8259A_auto_eoi); - restore_ELCR(irq_trigger); - return 0; -} - -static int i8259A_suspend(struct sys_device *dev, pm_message_t state) -{ - save_ELCR(irq_trigger); - return 0; -} - -static int i8259A_shutdown(struct sys_device *dev) -{ - /* Put the i8259A into a quiescent state that - * the kernel initialization code can get it - * out of. - */ - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ - return 0; -} - -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", - .suspend = i8259A_suspend, - .resume = i8259A_resume, - .shutdown = i8259A_shutdown, -}; - -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - -static int __init i8259A_init_sysfs(void) -{ - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; -} - -device_initcall(i8259A_init_sysfs); - -void init_8259A(int auto_eoi) -{ - unsigned long flags; - - i8259A_auto_eoi = auto_eoi; - - spin_lock_irqsave(&i8259A_lock, flags); - - outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ - outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ - - /* - * outb_pic - this has to work on a wide range of PC hardware. - */ - outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ - outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); - /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); - if (auto_eoi) /* master does Auto EOI */ - outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); - else /* master expects normal EOI */ - outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); - - outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ - outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); - /* 8259A-2 is a slave on master's IR2 */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); - /* (slave's support for AEOI in flat mode is to be investigated) */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); - - if (auto_eoi) - /* - * In AEOI mode we just have to mask the interrupt - * when acking. - */ - i8259A_chip.mask_ack = disable_8259A_irq; - else - i8259A_chip.mask_ack = mask_and_ack_8259A; - - udelay(100); /* wait for 8259A to initialize */ - - outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ - outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - - spin_unlock_irqrestore(&i8259A_lock, flags); -} - diff --git a/include/asm-x86/i8259.h b/include/asm-x86/i8259.h index 45d4df3e51e6..2f98df91f1f2 100644 --- a/include/asm-x86/i8259.h +++ b/include/asm-x86/i8259.h @@ -55,4 +55,6 @@ static inline void outb_pic(unsigned char value, unsigned int port) udelay(2); } +extern struct irq_chip i8259A_chip; + #endif /* __ASM_I8259_H__ */ -- cgit v1.2.3 From 15d613cb25efd978dd55592d011a6ffc487b3432 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:47:24 +0200 Subject: x86: i8259.c: remove #ifdefs around includes Remove #ifdefs around includes; including too much should be always safe. Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 2decba6b0101..8b7eb0cb2e7e 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -1,14 +1,10 @@ -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include #include #include -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include @@ -16,24 +12,17 @@ #include #include -#ifdef CONFIG_X86_64 #include -#endif /* CONFIG_X86_64 */ #include #include #include -#ifndef CONFIG_X86_64 #include -#else /* CONFIG_X86_64 */ #include -#endif /* CONFIG_X86_64 */ #include #include #include #include -#ifndef CONFIG_X86_64 #include -#endif /* ! CONFIG_X86_64 */ #include /* -- cgit v1.2.3 From 3e8631d27088f394b6788829e238a60bf07d47ab Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:52:52 +0200 Subject: x86: i8259.c: remove trivial ifdefs Remove #ifdefs where the only difference is formatting of comments. Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 20 +++----------------- 1 file changed, 3 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 8b7eb0cb2e7e..433e49edfd4f 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -175,24 +175,14 @@ handle_real_irq: if (irq & 8) { inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ outb(cached_slave_mask, PIC_SLAVE_IMR); -#ifndef CONFIG_X86_64 - outb(0x60+(irq&7),PIC_SLAVE_CMD);/* 'Specific EOI' to slave */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); /* 'Specific EOI' to master-IRQ2 */ -#else /* CONFIG_X86_64 */ /* 'Specific EOI' to slave */ - outb(0x60+(irq&7),PIC_SLAVE_CMD); + outb(0x60+(irq&7), PIC_SLAVE_CMD); /* 'Specific EOI' to master-IRQ2 */ - outb(0x60+PIC_CASCADE_IR,PIC_MASTER_CMD); -#endif /* CONFIG_X86_64 */ + outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); } else { inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ outb(cached_master_mask, PIC_MASTER_IMR); -#ifndef CONFIG_X86_64 - outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */ -#else /* CONFIG_X86_64 */ - /* 'Specific EOI' to master */ - outb(0x60+irq,PIC_MASTER_CMD); -#endif /* CONFIG_X86_64 */ + outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ } spin_unlock_irqrestore(&i8259A_lock, flags); return; @@ -215,12 +205,8 @@ spurious_8259A_irq: * lets ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { -#ifndef CONFIG_X86_64 - printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); -#else /* CONFIG_X86_64 */ printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); -#endif /* CONFIG_X86_64 */ spurious_irq_mask |= irqmask; } atomic_inc(&irq_err_count); -- cgit v1.2.3 From 680afbf989d697b9ba1382017a73c8cfa53b3f89 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 21 May 2008 11:57:52 +0200 Subject: x86: i8259: cleanup codingstyle Signed-off-by: Pavel Machek Cc: macro@ds2.pg.gda.pl Signed-off-by: Thomas Gleixner --- arch/x86/kernel/i8259.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 433e49edfd4f..7a0fda8f01b5 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -129,14 +129,14 @@ static inline int i8259A_irq_real(unsigned int irq) int irqmask = 1<> 8); - outb(0x0A,PIC_SLAVE_CMD); /* back to the IRR register */ + outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */ return value; } -- cgit v1.2.3 From d23b200a75f78e62744c3c25d078855eec8a689b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: x86: make init_ISA_irqs() static Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/i8259_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c index b44095efcf83..31f49e8f46a7 100644 --- a/arch/x86/kernel/i8259_64.c +++ b/arch/x86/kernel/i8259_64.c @@ -134,7 +134,7 @@ DEFINE_PER_CPU(vector_irq_t, vector_irq) = { [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 }; -void __init init_ISA_irqs (void) +static void __init init_ISA_irqs (void) { int i; -- cgit v1.2.3 From ec42418f1973e1f77da1fcca3be59c0acb878a9d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 15:59:58 +0200 Subject: x86: rename the i8259_32/64.c leftovers to irqinit_32/64.c The leftovers of the i8259 unification have nothing to do with i8259 at all. They contain interrupt init code and the i8259_xx name is just misleading now. Rename them to irqinit_32/64.c Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/i8259_32.c | 114 ----------------------- arch/x86/kernel/i8259_64.c | 217 ------------------------------------------- arch/x86/kernel/irqinit_32.c | 114 +++++++++++++++++++++++ arch/x86/kernel/irqinit_64.c | 217 +++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 332 insertions(+), 332 deletions(-) delete mode 100644 arch/x86/kernel/i8259_32.c delete mode 100644 arch/x86/kernel/i8259_64.c create mode 100644 arch/x86/kernel/irqinit_32.c create mode 100644 arch/x86/kernel/irqinit_64.c diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index f71a76ef2596..2a53ad2cb450 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -18,7 +18,7 @@ CFLAGS_tsc_64.o := $(nostackp) obj-y := process_$(BITS).o signal_$(BITS).o entry_$(BITS).o obj-y += traps_$(BITS).o irq_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o -obj-y += setup_$(BITS).o i8259.o i8259_$(BITS).o setup.o +obj-y += setup_$(BITS).o i8259.o irqinit_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o diff --git a/arch/x86/kernel/i8259_32.c b/arch/x86/kernel/i8259_32.c deleted file mode 100644 index d66914287ee1..000000000000 --- a/arch/x86/kernel/i8259_32.c +++ /dev/null @@ -1,114 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - - -/* - * Note that on a 486, we don't want to do a SIGFPE on an irq13 - * as the irq is unreliable, and exception 16 works correctly - * (ie as explained in the intel literature). On a 386, you - * can't use exception 16 due to bad IBM design, so we have to - * rely on the less exact irq13. - * - * Careful.. Not only is IRQ13 unreliable, but it is also - * leads to races. IBM designers who came up with it should - * be shot. - */ - - -static irqreturn_t math_error_irq(int cpl, void *dev_id) -{ - extern void math_error(void __user *); - outb(0,0xF0); - if (ignore_fpu_irq || !boot_cpu_data.hard_math) - return IRQ_NONE; - math_error((void __user *)get_irq_regs()->ip); - return IRQ_HANDLED; -} - -/* - * New motherboards sometimes make IRQ 13 be a PCI interrupt, - * so allow interrupt sharing. - */ -static struct irqaction fpu_irq = { - .handler = math_error_irq, - .mask = CPU_MASK_NONE, - .name = "fpu", -}; - -void __init init_ISA_irqs (void) -{ - int i; - -#ifdef CONFIG_X86_LOCAL_APIC - init_bsp_APIC(); -#endif - init_8259A(0); - - /* - * 16 old-style INTA-cycle interrupts: - */ - for (i = 0; i < 16; i++) { - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } -} - -/* Overridden in paravirt.c */ -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - /* all the set up before the call gates are initialised */ - pre_intr_init_hook(); - - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (i >= NR_IRQS) - break; - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (!test_bit(vector, used_vectors)) - set_intr_gate(vector, interrupt[i]); - } - - /* setup after call gates are initialised (usually add in - * the architecture specific gates) - */ - intr_init_hook(); - - /* - * External FPU? Set up irq13 if so, for - * original braindamaged IBM FERR coupling. - */ - if (boot_cpu_data.hard_math && !cpu_has_fpu) - setup_irq(FPU_IRQ, &fpu_irq); - - irq_ctx_init(smp_processor_id()); -} diff --git a/arch/x86/kernel/i8259_64.c b/arch/x86/kernel/i8259_64.c deleted file mode 100644 index 31f49e8f46a7..000000000000 --- a/arch/x86/kernel/i8259_64.c +++ /dev/null @@ -1,217 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Common place to define all x86 IRQ vectors - * - * This builds up the IRQ handler stubs using some ugly macros in irq.h - * - * These macros create the low-level assembly IRQ routines that save - * register context and call do_IRQ(). do_IRQ() then does all the - * operations that are needed to keep the AT (or SMP IOAPIC) - * interrupt-controller happy. - */ - -#define IRQ_NAME2(nr) nr##_interrupt(void) -#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) - -/* - * SMP has a few special interrupts for IPI messages - */ - -#define BUILD_IRQ(nr) \ - asmlinkage void IRQ_NAME(nr); \ - asm("\n.p2align\n" \ - "IRQ" #nr "_interrupt:\n\t" \ - "push $~(" #nr ") ; " \ - "jmp common_interrupt"); - -#define BI(x,y) \ - BUILD_IRQ(x##y) - -#define BUILD_16_IRQS(x) \ - BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ - BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ - BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ - BI(x,c) BI(x,d) BI(x,e) BI(x,f) - -/* - * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: - * (these are usually mapped to vectors 0x30-0x3f) - */ - -/* - * The IO-APIC gives us many more interrupt sources. Most of these - * are unused but an SMP system is supposed to have enough memory ... - * sometimes (mostly wrt. hw bugs) we get corrupted vectors all - * across the spectrum, so we really want to be prepared to get all - * of these. Plus, more powerful systems might have more than 64 - * IO-APIC registers. - * - * (these are usually mapped into the 0x30-0xff vector range) - */ - BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) -BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) -BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) -BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) - -#undef BUILD_16_IRQS -#undef BI - - -#define IRQ(x,y) \ - IRQ##x##y##_interrupt - -#define IRQLIST_16(x) \ - IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ - IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ - IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ - IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) - -/* for the irq vectors */ -static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { - IRQLIST_16(0x2), IRQLIST_16(0x3), - IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), - IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), - IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) -}; - -#undef IRQ -#undef IRQLIST_16 - - - - -/* - * IRQ2 is cascade interrupt to second interrupt controller - */ - -static struct irqaction irq2 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "cascade", -}; -DEFINE_PER_CPU(vector_irq_t, vector_irq) = { - [0 ... IRQ0_VECTOR - 1] = -1, - [IRQ0_VECTOR] = 0, - [IRQ1_VECTOR] = 1, - [IRQ2_VECTOR] = 2, - [IRQ3_VECTOR] = 3, - [IRQ4_VECTOR] = 4, - [IRQ5_VECTOR] = 5, - [IRQ6_VECTOR] = 6, - [IRQ7_VECTOR] = 7, - [IRQ8_VECTOR] = 8, - [IRQ9_VECTOR] = 9, - [IRQ10_VECTOR] = 10, - [IRQ11_VECTOR] = 11, - [IRQ12_VECTOR] = 12, - [IRQ13_VECTOR] = 13, - [IRQ14_VECTOR] = 14, - [IRQ15_VECTOR] = 15, - [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 -}; - -static void __init init_ISA_irqs (void) -{ - int i; - - init_bsp_APIC(); - init_8259A(0); - - for (i = 0; i < NR_IRQS; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - - if (i < 16) { - /* - * 16 old-style INTA-cycle interrupts: - */ - set_irq_chip_and_handler_name(i, &i8259A_chip, - handle_level_irq, "XT"); - } else { - /* - * 'high' PCI IRQs filled in on demand - */ - irq_desc[i].chip = &no_irq_chip; - } - } -} - -void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); - -void __init native_init_IRQ(void) -{ - int i; - - init_ISA_irqs(); - /* - * Cover the whole vector space, no vector can escape - * us. (some of these will be overridden and become - * 'special' SMP interrupts) - */ - for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { - int vector = FIRST_EXTERNAL_VECTOR + i; - if (vector != IA32_SYSCALL_VECTOR) - set_intr_gate(vector, interrupt[i]); - } - -#ifdef CONFIG_SMP - /* - * The reschedule interrupt is a CPU-to-CPU reschedule-helper - * IPI, driven by wakeup. - */ - alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - - /* IPIs for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); - alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); - - /* IPI for generic function call */ - alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); - - /* Low priority IPI to cleanup after moving an irq */ - set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); -#endif - alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); - alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); - - /* self generated IPI for local APIC timer */ - alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); - - /* IPI vectors for APIC spurious and error interrupts */ - alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); - alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); - - if (!acpi_ioapic) - setup_irq(2, &irq2); -} diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c new file mode 100644 index 000000000000..d66914287ee1 --- /dev/null +++ b/arch/x86/kernel/irqinit_32.c @@ -0,0 +1,114 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + + +/* + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ + + +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + extern void math_error(void __user *); + outb(0,0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->ip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. + */ +static struct irqaction fpu_irq = { + .handler = math_error_irq, + .mask = CPU_MASK_NONE, + .name = "fpu", +}; + +void __init init_ISA_irqs (void) +{ + int i; + +#ifdef CONFIG_X86_LOCAL_APIC + init_bsp_APIC(); +#endif + init_8259A(0); + + /* + * 16 old-style INTA-cycle interrupts: + */ + for (i = 0; i < 16; i++) { + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } +} + +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + /* all the set up before the call gates are initialised */ + pre_intr_init_hook(); + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (i >= NR_IRQS) + break; + /* SYSCALL_VECTOR was reserved in trap_init. */ + if (!test_bit(vector, used_vectors)) + set_intr_gate(vector, interrupt[i]); + } + + /* setup after call gates are initialised (usually add in + * the architecture specific gates) + */ + intr_init_hook(); + + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +} diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c new file mode 100644 index 000000000000..31f49e8f46a7 --- /dev/null +++ b/arch/x86/kernel/irqinit_64.c @@ -0,0 +1,217 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Common place to define all x86 IRQ vectors + * + * This builds up the IRQ handler stubs using some ugly macros in irq.h + * + * These macros create the low-level assembly IRQ routines that save + * register context and call do_IRQ(). do_IRQ() then does all the + * operations that are needed to keep the AT (or SMP IOAPIC) + * interrupt-controller happy. + */ + +#define IRQ_NAME2(nr) nr##_interrupt(void) +#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) + +/* + * SMP has a few special interrupts for IPI messages + */ + +#define BUILD_IRQ(nr) \ + asmlinkage void IRQ_NAME(nr); \ + asm("\n.p2align\n" \ + "IRQ" #nr "_interrupt:\n\t" \ + "push $~(" #nr ") ; " \ + "jmp common_interrupt"); + +#define BI(x,y) \ + BUILD_IRQ(x##y) + +#define BUILD_16_IRQS(x) \ + BI(x,0) BI(x,1) BI(x,2) BI(x,3) \ + BI(x,4) BI(x,5) BI(x,6) BI(x,7) \ + BI(x,8) BI(x,9) BI(x,a) BI(x,b) \ + BI(x,c) BI(x,d) BI(x,e) BI(x,f) + +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + BUILD_16_IRQS(0x2) BUILD_16_IRQS(0x3) +BUILD_16_IRQS(0x4) BUILD_16_IRQS(0x5) BUILD_16_IRQS(0x6) BUILD_16_IRQS(0x7) +BUILD_16_IRQS(0x8) BUILD_16_IRQS(0x9) BUILD_16_IRQS(0xa) BUILD_16_IRQS(0xb) +BUILD_16_IRQS(0xc) BUILD_16_IRQS(0xd) BUILD_16_IRQS(0xe) BUILD_16_IRQS(0xf) + +#undef BUILD_16_IRQS +#undef BI + + +#define IRQ(x,y) \ + IRQ##x##y##_interrupt + +#define IRQLIST_16(x) \ + IRQ(x,0), IRQ(x,1), IRQ(x,2), IRQ(x,3), \ + IRQ(x,4), IRQ(x,5), IRQ(x,6), IRQ(x,7), \ + IRQ(x,8), IRQ(x,9), IRQ(x,a), IRQ(x,b), \ + IRQ(x,c), IRQ(x,d), IRQ(x,e), IRQ(x,f) + +/* for the irq vectors */ +static void (*__initdata interrupt[NR_VECTORS - FIRST_EXTERNAL_VECTOR])(void) = { + IRQLIST_16(0x2), IRQLIST_16(0x3), + IRQLIST_16(0x4), IRQLIST_16(0x5), IRQLIST_16(0x6), IRQLIST_16(0x7), + IRQLIST_16(0x8), IRQLIST_16(0x9), IRQLIST_16(0xa), IRQLIST_16(0xb), + IRQLIST_16(0xc), IRQLIST_16(0xd), IRQLIST_16(0xe), IRQLIST_16(0xf) +}; + +#undef IRQ +#undef IRQLIST_16 + + + + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ + +static struct irqaction irq2 = { + .handler = no_action, + .mask = CPU_MASK_NONE, + .name = "cascade", +}; +DEFINE_PER_CPU(vector_irq_t, vector_irq) = { + [0 ... IRQ0_VECTOR - 1] = -1, + [IRQ0_VECTOR] = 0, + [IRQ1_VECTOR] = 1, + [IRQ2_VECTOR] = 2, + [IRQ3_VECTOR] = 3, + [IRQ4_VECTOR] = 4, + [IRQ5_VECTOR] = 5, + [IRQ6_VECTOR] = 6, + [IRQ7_VECTOR] = 7, + [IRQ8_VECTOR] = 8, + [IRQ9_VECTOR] = 9, + [IRQ10_VECTOR] = 10, + [IRQ11_VECTOR] = 11, + [IRQ12_VECTOR] = 12, + [IRQ13_VECTOR] = 13, + [IRQ14_VECTOR] = 14, + [IRQ15_VECTOR] = 15, + [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 +}; + +static void __init init_ISA_irqs (void) +{ + int i; + + init_bsp_APIC(); + init_8259A(0); + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + + if (i < 16) { + /* + * 16 old-style INTA-cycle interrupts: + */ + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } else { + /* + * 'high' PCI IRQs filled in on demand + */ + irq_desc[i].chip = &no_irq_chip; + } + } +} + +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +void __init native_init_IRQ(void) +{ + int i; + + init_ISA_irqs(); + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) { + int vector = FIRST_EXTERNAL_VECTOR + i; + if (vector != IA32_SYSCALL_VECTOR) + set_intr_gate(vector, interrupt[i]); + } + +#ifdef CONFIG_SMP + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); +#endif + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); + + /* self generated IPI for local APIC timer */ + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + if (!acpi_ioapic) + setup_irq(2, &irq2); +} -- cgit v1.2.3 From 3711ccb07b7f0a13f4f1aa16a8fdca9c930f21ca Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 17:24:34 +0200 Subject: x86: fixup the fallout of the bitops changes Signed-off-by: Thomas Gleixner --- include/asm-x86/thread_info.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 25d710532561..895339d2bc0b 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -245,7 +245,7 @@ static inline void set_restore_sigmask(void) { struct thread_info *ti = current_thread_info(); ti->status |= TS_RESTORE_SIGMASK; - set_bit(TIF_SIGPENDING, &ti->flags); + set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags); } #endif /* !__ASSEMBLY__ */ -- cgit v1.2.3 From 81d50bb254ed53a0da45a65988e4e1fa08e8a541 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Thu, 15 May 2008 19:42:49 -0700 Subject: posix-timers: print RT watchdog message It's useful to detect which process is killed by RT watchdog. Signed-off-by: Hiroshi Shimamoto Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/posix-cpu-timers.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index f1525ad06cb3..c42a03aef36f 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -1037,6 +1037,9 @@ static void check_thread_timers(struct task_struct *tsk, sig->rlim[RLIMIT_RTTIME].rlim_cur += USEC_PER_SEC; } + printk(KERN_INFO + "RT Watchdog Timeout: %s[%d]\n", + tsk->comm, task_pid_nr(tsk)); __group_send_sig_info(SIGXCPU, SEND_SIG_PRIV, tsk); } } -- cgit v1.2.3 From 7f6f3a39d258adf51f0fb1fe0dab52272a1c61a4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 23:12:18 +0200 Subject: namespacecheck: fix kernel printk.c Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/printk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/printk.c b/kernel/printk.c index 8fb01c32aa3b..b620e3d96136 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -231,7 +231,7 @@ static inline void boot_delay_msec(void) /* * Return the number of unread characters in the log buffer. */ -int log_buf_get_len(void) +static int log_buf_get_len(void) { return logged_chars; } @@ -270,7 +270,7 @@ int log_buf_copy(char *dest, int idx, int len) /* * Extract a single character from the log buffer. */ -int log_buf_read(int idx) +static int log_buf_read(int idx) { char ret; -- cgit v1.2.3 From 42fdfa238a23643226910acf922ea930b3286032 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 23:14:51 +0200 Subject: namespacecheck: more kernel/printk.c fixes [ Stephen Rothwell : build fix ] Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/linux/kernel.h | 6 ------ kernel/printk.c | 13 ------------- 2 files changed, 19 deletions(-) diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 792bf0aa779b..f2a668c195bf 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -184,9 +184,6 @@ asmlinkage int vprintk(const char *fmt, va_list args) __attribute__ ((format (printf, 1, 0))); asmlinkage int printk(const char * fmt, ...) __attribute__ ((format (printf, 1, 2))) __cold; -extern int log_buf_get_len(void); -extern int log_buf_read(int idx); -extern int log_buf_copy(char *dest, int idx, int len); extern int printk_ratelimit_jiffies; extern int printk_ratelimit_burst; @@ -202,9 +199,6 @@ static inline int vprintk(const char *s, va_list args) { return 0; } static inline int printk(const char *s, ...) __attribute__ ((format (printf, 1, 2))); static inline int __cold printk(const char *s, ...) { return 0; } -static inline int log_buf_get_len(void) { return 0; } -static inline int log_buf_read(int idx) { return 0; } -static inline int log_buf_copy(char *dest, int idx, int len) { return 0; } static inline int printk_ratelimit(void) { return 0; } static inline int __printk_ratelimit(int ratelimit_jiffies, \ int ratelimit_burst) { return 0; } diff --git a/kernel/printk.c b/kernel/printk.c index b620e3d96136..55d16e57499a 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -267,19 +267,6 @@ int log_buf_copy(char *dest, int idx, int len) return ret; } -/* - * Extract a single character from the log buffer. - */ -static int log_buf_read(int idx) -{ - char ret; - - if (log_buf_copy(&ret, idx, 1) == 1) - return ret; - else - return -1; -} - /* * Commands to do_syslog: * -- cgit v1.2.3 From 3b8945e8d40645eecdb7d2357ca531f9b4dd9f71 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 12 May 2008 21:21:04 +0200 Subject: printk: clean up recursion check related static variables Make printk_recursion_bug_msg static and drop printk prefix from recursion variables. Signed-off-by: Tejun Heo Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/printk.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/kernel/printk.c b/kernel/printk.c index 55d16e57499a..8b42f87e311d 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -652,16 +652,14 @@ static int acquire_console_semaphore_for_printk(unsigned int cpu) spin_unlock(&logbuf_lock); return retval; } - -const char printk_recursion_bug_msg [] = - KERN_CRIT "BUG: recent printk recursion!\n"; -static int printk_recursion_bug; +static const char recursion_bug_msg [] = + KERN_CRIT "BUG: recent printk recursion!\n"; +static int recursion_bug; +static int log_level_unknown = 1; +static char printk_buf[1024]; asmlinkage int vprintk(const char *fmt, va_list args) { - static int log_level_unknown = 1; - static char printk_buf[1024]; - unsigned long flags; int printed_len = 0; int this_cpu; @@ -686,7 +684,7 @@ asmlinkage int vprintk(const char *fmt, va_list args) * it can be printed at the next appropriate moment: */ if (!oops_in_progress) { - printk_recursion_bug = 1; + recursion_bug = 1; goto out_restore_irqs; } zap_locks(); @@ -696,10 +694,10 @@ asmlinkage int vprintk(const char *fmt, va_list args) spin_lock(&logbuf_lock); printk_cpu = this_cpu; - if (printk_recursion_bug) { - printk_recursion_bug = 0; - strcpy(printk_buf, printk_recursion_bug_msg); - printed_len = sizeof(printk_recursion_bug_msg); + if (recursion_bug) { + recursion_bug = 0; + strcpy(printk_buf, recursion_bug_msg); + printed_len = sizeof(recursion_bug_msg); } /* Emit the output into the temporary buffer */ printed_len += vscnprintf(printk_buf + printed_len, -- cgit v1.2.3 From cd3a1b8562d28490b334a61d5eb05df3d722d91e Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Mon, 12 May 2008 21:21:04 +0200 Subject: printk: don't prefer unsuited consoles on registration console election: If some console happens to be registered first which does not provide a tty binding (!console->device), it prevents that more suited consoles which are registered later on can enter the candidate pool for console_device(). This is observable with KGDB's console which may already be registered (and exploited!) during early debugger connections, that is before any regular console registration. This patch fixes the issue by postponing the final, automated preferred_console selection until someone with a non-NULL device handler comes around. Signed-off-by: Jan Kiszka Cc: Jason Wessel Cc: Gerd Hoffmann Cc: Michael Ellerman Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/printk.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/kernel/printk.c b/kernel/printk.c index 8b42f87e311d..7d5556152234 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1157,8 +1157,11 @@ void register_console(struct console *console) console->index = 0; if (console->setup == NULL || console->setup(console, NULL) == 0) { - console->flags |= CON_ENABLED | CON_CONSDEV; - preferred_console = 0; + console->flags |= CON_ENABLED; + if (console->device) { + console->flags |= CON_CONSDEV; + preferred_console = 0; + } } } -- cgit v1.2.3 From ac60ad7413ca8208094609a3b88ed9b1ed012fbc Mon Sep 17 00:00:00 2001 From: Nick Andrew Date: Mon, 12 May 2008 21:21:04 +0200 Subject: printk: refactor processing of line severity tokens Restructure the logic of vprintk() so the processing of the leading 3 characters of each input line is in one place, regardless whether printk_time is enabled. This makes the code smaller and easier to understand. size reduction in kernel/printk.o: text data bss dec hex filename 6157 397 1049804 1056358 101e66 printk.o.before 6117 397 1049804 1056318 101e3e printk.o.after and some style uncleanlinesses removed as well as a side-effect: Before: total: 19 errors, 22 warnings, 1340 lines checked After: total: 17 errors, 22 warnings, 1333 lines checked Signed-off-by: Nick Andrew Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/printk.c | 61 +++++++++++++++++++++++++-------------------------------- 1 file changed, 27 insertions(+), 34 deletions(-) diff --git a/kernel/printk.c b/kernel/printk.c index 7d5556152234..98ca1b76277f 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -655,13 +655,13 @@ static int acquire_console_semaphore_for_printk(unsigned int cpu) static const char recursion_bug_msg [] = KERN_CRIT "BUG: recent printk recursion!\n"; static int recursion_bug; -static int log_level_unknown = 1; + static int new_text_line = 1; static char printk_buf[1024]; asmlinkage int vprintk(const char *fmt, va_list args) { - unsigned long flags; int printed_len = 0; + unsigned long flags; int this_cpu; char *p; @@ -703,61 +703,54 @@ asmlinkage int vprintk(const char *fmt, va_list args) printed_len += vscnprintf(printk_buf + printed_len, sizeof(printk_buf) - printed_len, fmt, args); + /* * Copy the output into log_buf. If the caller didn't provide * appropriate log level tags, we insert them here */ for (p = printk_buf; *p; p++) { - if (log_level_unknown) { - /* log_level_unknown signals the start of a new line */ + if (new_text_line) { + int current_log_level = default_message_loglevel; + /* If a token, set current_log_level and skip over */ + if (p[0] == '<' && p[1] >= '0' && p[1] <= '7' && + p[2] == '>') { + current_log_level = p[1] - '0'; + p += 3; + printed_len -= 3; + } + + /* Always output the token */ + emit_log_char('<'); + emit_log_char(current_log_level + '0'); + emit_log_char('>'); + printed_len += 3; + new_text_line = 0; + if (printk_time) { - int loglev_char; + /* Follow the token with the time */ char tbuf[50], *tp; unsigned tlen; unsigned long long t; unsigned long nanosec_rem; - /* - * force the log level token to be - * before the time output. - */ - if (p[0] == '<' && p[1] >='0' && - p[1] <= '7' && p[2] == '>') { - loglev_char = p[1]; - p += 3; - printed_len -= 3; - } else { - loglev_char = default_message_loglevel - + '0'; - } t = cpu_clock(printk_cpu); nanosec_rem = do_div(t, 1000000000); - tlen = sprintf(tbuf, - "<%c>[%5lu.%06lu] ", - loglev_char, - (unsigned long)t, - nanosec_rem/1000); + tlen = sprintf(tbuf, "[%5lu.%06lu] ", + (unsigned long) t, + nanosec_rem / 1000); for (tp = tbuf; tp < tbuf + tlen; tp++) emit_log_char(*tp); printed_len += tlen; - } else { - if (p[0] != '<' || p[1] < '0' || - p[1] > '7' || p[2] != '>') { - emit_log_char('<'); - emit_log_char(default_message_loglevel - + '0'); - emit_log_char('>'); - printed_len += 3; - } } - log_level_unknown = 0; + if (!*p) break; } + emit_log_char(*p); if (*p == '\n') - log_level_unknown = 1; + new_text_line = 1; } /* -- cgit v1.2.3 From 091593080533a752ce66d12858d8c4105c8e1793 Mon Sep 17 00:00:00 2001 From: Nick Andrew Date: Mon, 12 May 2008 21:21:04 +0200 Subject: printk: remember the message level for multi-line output printk(KERN_ALERT "Danger Will Robinson!\nAlien Approaching!\n"); At present this will result in one message at ALERT level and one at the current default message loglevel (e.g. WARNING). This is non-intuitive. Modify vprintk() to remember the message loglevel each time it is specified and use it for subsequent lines of output which do not specify one, within the same call to printk. Signed-off-by: Nick Andrew Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/printk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/printk.c b/kernel/printk.c index 98ca1b76277f..475fc22a2857 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -661,6 +661,7 @@ static char printk_buf[1024]; asmlinkage int vprintk(const char *fmt, va_list args) { int printed_len = 0; + int current_log_level = default_message_loglevel; unsigned long flags; int this_cpu; char *p; @@ -710,7 +711,6 @@ asmlinkage int vprintk(const char *fmt, va_list args) */ for (p = printk_buf; *p; p++) { if (new_text_line) { - int current_log_level = default_message_loglevel; /* If a token, set current_log_level and skip over */ if (p[0] == '<' && p[1] >= '0' && p[1] <= '7' && p[2] == '>') { -- cgit v1.2.3 From 6360b1fbb4a939efd34fc770c2ebd927c55506e0 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:41 +0200 Subject: move BUG_TABLE into RODATA Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/avr32/kernel/vmlinux.lds.S | 2 -- arch/parisc/kernel/vmlinux.lds.S | 1 - arch/powerpc/kernel/vmlinux.lds.S | 2 -- arch/s390/kernel/vmlinux.lds.S | 1 - arch/sh/kernel/vmlinux_32.lds.S | 1 - arch/sh/kernel/vmlinux_64.lds.S | 1 - arch/x86/kernel/vmlinux_32.lds.S | 8 +++----- arch/x86/kernel/vmlinux_64.lds.S | 10 ++++------ include/asm-generic/vmlinux.lds.h | 6 ++++++ 9 files changed, 13 insertions(+), 19 deletions(-) diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S index 481cfd40c053..bc932c9b4272 100644 --- a/arch/avr32/kernel/vmlinux.lds.S +++ b/arch/avr32/kernel/vmlinux.lds.S @@ -93,8 +93,6 @@ SECTIONS __stop___ex_table = .; } - BUG_TABLE - RODATA . = ALIGN(THREAD_SIZE); diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index 50b4a3a25d0a..ff7d4ff4675a 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -66,7 +66,6 @@ SECTIONS _etext = .; RODATA - BUG_TABLE /* writeable */ /* Make sure this is page aligned so diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 0c3000bf8d75..53d57d17a894 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -64,8 +64,6 @@ SECTIONS NOTES - BUG_TABLE - /* * Init sections discarded at runtime */ diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index b4607155e8d0..76c1e60c92f3 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -40,7 +40,6 @@ SECTIONS _etext = .; /* End of text section */ NOTES :text :note - BUG_TABLE :text RODATA diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S index c7113786ecd4..7b4b82bd1156 100644 --- a/arch/sh/kernel/vmlinux_32.lds.S +++ b/arch/sh/kernel/vmlinux_32.lds.S @@ -44,7 +44,6 @@ SECTIONS _etext = .; /* End of text section */ - BUG_TABLE NOTES RO_DATA(PAGE_SIZE) diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S index d1e177009a41..33fa46451406 100644 --- a/arch/sh/kernel/vmlinux_64.lds.S +++ b/arch/sh/kernel/vmlinux_64.lds.S @@ -65,7 +65,6 @@ SECTIONS _etext = .; /* End of text section */ - BUG_TABLE NOTES RO_DATA(PAGE_SIZE) diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S index ce5ed083a1e9..aa0855471c79 100644 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -49,16 +49,14 @@ SECTIONS _etext = .; /* End of text section */ } :text = 0x9090 + NOTES :text :note + . = ALIGN(16); /* Exception table */ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { __start___ex_table = .; *(__ex_table) __stop___ex_table = .; - } - - NOTES :text :note - - BUG_TABLE :text + } :text = 0x9090 . = ALIGN(4); .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index fad3674b06a5..d123747af1e4 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -19,7 +19,7 @@ PHDRS { data PT_LOAD FLAGS(7); /* RWE */ user PT_LOAD FLAGS(7); /* RWE */ data.init PT_LOAD FLAGS(7); /* RWE */ - note PT_NOTE FLAGS(4); /* R__ */ + note PT_NOTE FLAGS(0); /* ___ */ } SECTIONS { @@ -40,16 +40,14 @@ SECTIONS _etext = .; /* End of text section */ } :text = 0x9090 + NOTES :text :note + . = ALIGN(16); /* Exception table */ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { __start___ex_table = .; *(__ex_table) __stop___ex_table = .; - } - - NOTES :text :note - - BUG_TABLE :text + } :text = 0x9090 RODATA diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index f054778e916c..dd2cc8122ad8 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -67,6 +67,8 @@ *(.rodata1) \ } \ \ + BUG_TABLE \ + \ /* PCI quirks */ \ .pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \ @@ -310,6 +312,7 @@ .stab.indexstr 0 : { *(.stab.indexstr) } \ .comment 0 : { *(.comment) } +#ifdef CONFIG_GENERIC_BUG #define BUG_TABLE \ . = ALIGN(8); \ __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \ @@ -317,6 +320,9 @@ *(__bug_table) \ __stop___bug_table = .; \ } +#else +#define BUG_TABLE +#endif #define NOTES \ .notes : AT(ADDR(.notes) - LOAD_OFFSET) { \ -- cgit v1.2.3 From 63687a528c39a67c1a213cdffa09feb0e6af9dbe Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:41 +0200 Subject: x86: move tracedata to RODATA .. allowing it to be write-protected just as other read-only data under CONFIG_DEBUG_RODATA. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/vmlinux_32.lds.S | 7 ------- arch/x86/kernel/vmlinux_64.lds.S | 7 ------- drivers/base/power/trace.c | 2 +- include/asm-generic/vmlinux.lds.h | 14 ++++++++++++++ include/asm-x86/resume-trace.h | 2 +- include/linux/resume-trace.h | 2 +- 6 files changed, 17 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S index ce5ed083a1e9..2674f5796275 100644 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -60,13 +60,6 @@ SECTIONS BUG_TABLE :text - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - RODATA /* writeable */ diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index fad3674b06a5..687041bfbae5 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -53,13 +53,6 @@ SECTIONS RODATA - . = ALIGN(4); - .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { - __tracedata_start = .; - *(.tracedata) - __tracedata_end = .; - } - . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ /* Data */ .data : AT(ADDR(.data) - LOAD_OFFSET) { diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c index 2b4b392dcbc1..87a7f1d02578 100644 --- a/drivers/base/power/trace.c +++ b/drivers/base/power/trace.c @@ -153,7 +153,7 @@ EXPORT_SYMBOL(set_trace_device); * it's not any guarantee, but it's a high _likelihood_ that * the match is valid). */ -void generate_resume_trace(void *tracedata, unsigned int user) +void generate_resume_trace(const void *tracedata, unsigned int user) { unsigned short lineno = *(unsigned short *)tracedata; const char *file = *(const char **)(tracedata + 2); diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index f054778e916c..f1992dc5c424 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -93,6 +93,8 @@ VMLINUX_SYMBOL(__end_rio_route_ops) = .; \ } \ \ + TRACEDATA \ + \ /* Kernel symbol table: Normal symbols */ \ __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___ksymtab) = .; \ @@ -318,6 +320,18 @@ __stop___bug_table = .; \ } +#ifdef CONFIG_PM_TRACE +#define TRACEDATA \ + . = ALIGN(4); \ + .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \ + __tracedata_start = .; \ + *(.tracedata) \ + __tracedata_end = .; \ + } +#else +#define TRACEDATA +#endif + #define NOTES \ .notes : AT(ADDR(.notes) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start_notes) = .; \ diff --git a/include/asm-x86/resume-trace.h b/include/asm-x86/resume-trace.h index 2557514d7ef6..8d9f0b41ee86 100644 --- a/include/asm-x86/resume-trace.h +++ b/include/asm-x86/resume-trace.h @@ -6,7 +6,7 @@ #define TRACE_RESUME(user) \ do { \ if (pm_trace_enabled) { \ - void *tracedata; \ + const void *tracedata; \ asm volatile(_ASM_MOV_UL " $1f,%0\n" \ ".section .tracedata,\"a\"\n" \ "1:\t.word %c1\n\t" \ diff --git a/include/linux/resume-trace.h b/include/linux/resume-trace.h index f3f4f28c6960..c9ba2fdf807d 100644 --- a/include/linux/resume-trace.h +++ b/include/linux/resume-trace.h @@ -8,7 +8,7 @@ extern int pm_trace_enabled; struct device; extern void set_trace_device(struct device *); -extern void generate_resume_trace(void *tracedata, unsigned int user); +extern void generate_resume_trace(const void *tracedata, unsigned int user); #define TRACE_DEVICE(dev) do { \ if (pm_trace_enabled) \ -- cgit v1.2.3 From a2eddfa95919a730e0e5ed17e9c303fe5ba249cd Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:41 +0200 Subject: x86: make /proc/stat account for all interrupts LAPIC interrupts, which don't go through the generic interrupt handling code, aren't accounted for in /proc/stat. Hence this patch adds a mechanism architectures can use to accordingly adjust the statistics. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/irq_32.c | 38 ++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/irq_64.c | 28 ++++++++++++++++++++++++++++ fs/proc/proc_misc.c | 9 +++++++++ include/asm-x86/hardirq.h | 6 ++++++ 4 files changed, 81 insertions(+) diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 147352df28b9..468acd04aa2e 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -313,16 +313,20 @@ skip: per_cpu(irq_stat,j).irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_thermal_count); seq_printf(p, " Thermal event interrupts\n"); +#endif +#ifdef CONFIG_X86_LOCAL_APIC seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", per_cpu(irq_stat,j).irq_spurious_count); seq_printf(p, " Spurious interrupts\n"); +#endif seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count)); #if defined(CONFIG_X86_IO_APIC) seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count)); @@ -331,6 +335,40 @@ skip: return 0; } +/* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = nmi_count(cpu); + +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).apic_timer_irqs; +#endif +#ifdef CONFIG_SMP + sum += per_cpu(irq_stat, cpu).irq_resched_count; + sum += per_cpu(irq_stat, cpu).irq_call_count; + sum += per_cpu(irq_stat, cpu).irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += per_cpu(irq_stat, cpu).irq_thermal_count; +#endif +#ifdef CONFIG_X86_LOCAL_APIC + sum += per_cpu(irq_stat, cpu).irq_spurious_count; +#endif + return sum; +} + +u64 arch_irq_stat(void) +{ + u64 sum = atomic_read(&irq_err_count); + +#ifdef CONFIG_X86_IO_APIC + sum += atomic_read(&irq_mis_count); +#endif + return sum; +} + #ifdef CONFIG_HOTPLUG_CPU #include diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c index 3aac15466a91..1f78b238d8d2 100644 --- a/arch/x86/kernel/irq_64.c +++ b/arch/x86/kernel/irq_64.c @@ -135,6 +135,7 @@ skip: seq_printf(p, "%10u ", cpu_pda(j)->irq_tlb_count); seq_printf(p, " TLB shootdowns\n"); #endif +#ifdef CONFIG_X86_MCE seq_printf(p, "TRM: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_thermal_count); @@ -143,6 +144,7 @@ skip: for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_threshold_count); seq_printf(p, " Threshold APIC interrupts\n"); +#endif seq_printf(p, "SPU: "); for_each_online_cpu(j) seq_printf(p, "%10u ", cpu_pda(j)->irq_spurious_count); @@ -152,6 +154,32 @@ skip: return 0; } +/* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = cpu_pda(cpu)->__nmi_count; + + sum += cpu_pda(cpu)->apic_timer_irqs; +#ifdef CONFIG_SMP + sum += cpu_pda(cpu)->irq_resched_count; + sum += cpu_pda(cpu)->irq_call_count; + sum += cpu_pda(cpu)->irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + sum += cpu_pda(cpu)->irq_thermal_count; + sum += cpu_pda(cpu)->irq_threshold_count; +#endif + sum += cpu_pda(cpu)->irq_spurious_count; + return sum; +} + +u64 arch_irq_stat(void) +{ + return atomic_read(&irq_err_count); +} + /* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index 74a323d2b850..903e617bec58 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -472,6 +472,13 @@ static const struct file_operations proc_vmalloc_operations = { }; #endif +#ifndef arch_irq_stat_cpu +#define arch_irq_stat_cpu(cpu) 0 +#endif +#ifndef arch_irq_stat +#define arch_irq_stat() 0 +#endif + static int show_stat(struct seq_file *p, void *v) { int i; @@ -509,7 +516,9 @@ static int show_stat(struct seq_file *p, void *v) sum += temp; per_irq_sum[j] += temp; } + sum += arch_irq_stat_cpu(i); } + sum += arch_irq_stat(); seq_printf(p, "cpu %llu %llu %llu %llu %llu %llu %llu %llu %llu\n", (unsigned long long)cputime64_to_clock_t(user), diff --git a/include/asm-x86/hardirq.h b/include/asm-x86/hardirq.h index 314434d664e7..000787df66e6 100644 --- a/include/asm-x86/hardirq.h +++ b/include/asm-x86/hardirq.h @@ -3,3 +3,9 @@ #else # include "hardirq_64.h" #endif + +extern u64 arch_irq_stat_cpu(unsigned int cpu); +#define arch_irq_stat_cpu arch_irq_stat_cpu + +extern u64 arch_irq_stat(void); +#define arch_irq_stat arch_irq_stat -- cgit v1.2.3 From 962cf36c5bf6d2840b8d66ee9a606fae2f540bbd Mon Sep 17 00:00:00 2001 From: "Carlos R. Mafra" Date: Thu, 15 May 2008 11:15:37 -0300 Subject: Remove argument from open_softirq which is always NULL As git-grep shows, open_softirq() is always called with the last argument being NULL block/blk-core.c: open_softirq(BLOCK_SOFTIRQ, blk_done_softirq, NULL); kernel/hrtimer.c: open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq, NULL); kernel/rcuclassic.c: open_softirq(RCU_SOFTIRQ, rcu_process_callbacks, NULL); kernel/rcupreempt.c: open_softirq(RCU_SOFTIRQ, rcu_process_callbacks, NULL); kernel/sched.c: open_softirq(SCHED_SOFTIRQ, run_rebalance_domains, NULL); kernel/softirq.c: open_softirq(TASKLET_SOFTIRQ, tasklet_action, NULL); kernel/softirq.c: open_softirq(HI_SOFTIRQ, tasklet_hi_action, NULL); kernel/timer.c: open_softirq(TIMER_SOFTIRQ, run_timer_softirq, NULL); net/core/dev.c: open_softirq(NET_TX_SOFTIRQ, net_tx_action, NULL); net/core/dev.c: open_softirq(NET_RX_SOFTIRQ, net_rx_action, NULL); This observation has already been made by Matthew Wilcox in June 2002 (http://www.cs.helsinki.fi/linux/linux-kernel/2002-25/0687.html) "I notice that none of the current softirq routines use the data element passed to them." and the situation hasn't changed since them. So it appears we can safely remove that extra argument to save 128 (54) bytes of kernel data (text). Signed-off-by: Carlos R. Mafra Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- block/blk-core.c | 2 +- include/linux/interrupt.h | 3 +-- kernel/hrtimer.c | 2 +- kernel/rcuclassic.c | 2 +- kernel/rcupreempt.c | 2 +- kernel/sched.c | 2 +- kernel/softirq.c | 7 +++---- kernel/timer.c | 2 +- net/core/dev.c | 4 ++-- 9 files changed, 12 insertions(+), 14 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 6a9cc0d22a61..75fdc65136e8 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2048,7 +2048,7 @@ int __init blk_dev_init(void) for_each_possible_cpu(i) INIT_LIST_HEAD(&per_cpu(blk_cpu_done, i)); - open_softirq(BLOCK_SOFTIRQ, blk_done_softirq, NULL); + open_softirq(BLOCK_SOFTIRQ, blk_done_softirq); register_hotcpu_notifier(&blk_cpu_notifier); return 0; diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index f1fc7470d26c..a86186dd0474 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -285,12 +285,11 @@ enum struct softirq_action { void (*action)(struct softirq_action *); - void *data; }; asmlinkage void do_softirq(void); asmlinkage void __do_softirq(void); -extern void open_softirq(int nr, void (*action)(struct softirq_action*), void *data); +extern void open_softirq(int nr, void (*action)(struct softirq_action *)); extern void softirq_init(void); #define __raise_softirq_irqoff(nr) do { or_softirq_pending(1UL << (nr)); } while (0) extern void raise_softirq_irqoff(unsigned int nr); diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 421be5fe5cc7..861b4088092a 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1669,7 +1669,7 @@ void __init hrtimers_init(void) (void *)(long)smp_processor_id()); register_cpu_notifier(&hrtimers_nb); #ifdef CONFIG_HIGH_RES_TIMERS - open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq, NULL); + open_softirq(HRTIMER_SOFTIRQ, run_hrtimer_softirq); #endif } diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c index f4ffbd0f306f..f6e01f3ae9c6 100644 --- a/kernel/rcuclassic.c +++ b/kernel/rcuclassic.c @@ -529,7 +529,7 @@ static void __cpuinit rcu_online_cpu(int cpu) rcu_init_percpu_data(cpu, &rcu_ctrlblk, rdp); rcu_init_percpu_data(cpu, &rcu_bh_ctrlblk, bh_rdp); - open_softirq(RCU_SOFTIRQ, rcu_process_callbacks, NULL); + open_softirq(RCU_SOFTIRQ, rcu_process_callbacks); } static int __cpuinit rcu_cpu_notify(struct notifier_block *self, diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index e1cdf196a515..9dd827db359f 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -1125,7 +1125,7 @@ void __init __rcu_init(void) for_each_online_cpu(cpu) rcu_cpu_notify(&rcu_nb, CPU_UP_PREPARE, (void *)(long) cpu); - open_softirq(RCU_SOFTIRQ, rcu_process_callbacks, NULL); + open_softirq(RCU_SOFTIRQ, rcu_process_callbacks); } /* diff --git a/kernel/sched.c b/kernel/sched.c index cfa222a91539..56ea3a203a5a 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -8154,7 +8154,7 @@ void __init sched_init(void) #endif #ifdef CONFIG_SMP - open_softirq(SCHED_SOFTIRQ, run_rebalance_domains, NULL); + open_softirq(SCHED_SOFTIRQ, run_rebalance_domains); #endif #ifdef CONFIG_RT_MUTEXES diff --git a/kernel/softirq.c b/kernel/softirq.c index 36e061740047..059256874e9b 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -347,9 +347,8 @@ void raise_softirq(unsigned int nr) local_irq_restore(flags); } -void open_softirq(int nr, void (*action)(struct softirq_action*), void *data) +void open_softirq(int nr, void (*action)(struct softirq_action *)) { - softirq_vec[nr].data = data; softirq_vec[nr].action = action; } @@ -503,8 +502,8 @@ void __init softirq_init(void) &per_cpu(tasklet_hi_vec, cpu).head; } - open_softirq(TASKLET_SOFTIRQ, tasklet_action, NULL); - open_softirq(HI_SOFTIRQ, tasklet_hi_action, NULL); + open_softirq(TASKLET_SOFTIRQ, tasklet_action); + open_softirq(HI_SOFTIRQ, tasklet_hi_action); } static int ksoftirqd(void * __bind_cpu) diff --git a/kernel/timer.c b/kernel/timer.c index ceacc6626572..b4da888497fa 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1502,7 +1502,7 @@ void __init init_timers(void) BUG_ON(err == NOTIFY_BAD); register_cpu_notifier(&timers_nb); - open_softirq(TIMER_SOFTIRQ, run_timer_softirq, NULL); + open_softirq(TIMER_SOFTIRQ, run_timer_softirq); } /** diff --git a/net/core/dev.c b/net/core/dev.c index 582963077877..cf0e16731dc7 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4563,8 +4563,8 @@ static int __init net_dev_init(void) dev_boot_phase = 0; - open_softirq(NET_TX_SOFTIRQ, net_tx_action, NULL); - open_softirq(NET_RX_SOFTIRQ, net_rx_action, NULL); + open_softirq(NET_TX_SOFTIRQ, net_tx_action); + open_softirq(NET_RX_SOFTIRQ, net_rx_action); hotcpu_notifier(dev_cpu_callback, 0); dst_init(); -- cgit v1.2.3 From c2c14fb7afcc67b48724571506e095fccc65a670 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: x86: tsc_64.c make constant UL arch/x86/kernel/tsc_64.c:245:13: warning: constant 0x100000000 is so big it is long Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/tsc_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c index fcc16e58609e..c19b0e273ef1 100644 --- a/arch/x86/kernel/tsc_64.c +++ b/arch/x86/kernel/tsc_64.c @@ -242,7 +242,7 @@ void __init tsc_calibrate(void) if (hpet) { printk(KERN_INFO "TSC calibrated against HPET\n"); if (hpet2 < hpet1) - hpet2 += 0x100000000; + hpet2 += 0x100000000UL; hpet2 -= hpet1; tsc1 = (hpet2 * hpet_readl(HPET_PERIOD)) / 1000000; } else { -- cgit v1.2.3 From e6b0edef3453677b13e175a104a83eb36d062dd3 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Mon, 12 May 2008 15:43:38 +0200 Subject: x86: clean up vdso_enabled type on x86_64 This fixes type of "vdso_enabled" on X86_64 to match extern in asm/elf.h. Signed-off-by: OGAWA Hirofumi Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/vdso/vma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index 3fdd51497a83..19a6cfaf5db9 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -16,7 +16,7 @@ #include "vextern.h" /* Just for VMAGIC. */ #undef VEXTERN -int vdso_enabled = 1; +unsigned int __read_mostly vdso_enabled = 1; extern char vdso_start[], vdso_end[]; extern unsigned short vdso_sync_cpuid; -- cgit v1.2.3 From 46dd98a5c0b907f94742579ab605be1933a37abd Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:10:39 -0700 Subject: arch/x86/mm/pat.c: use boot_cpu_has() arch/x86/mm/pat.c: In function 'phys_mem_access_prot_allowed': arch/x86/mm/pat.c:526: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type arch/x86/mm/pat.c:526: warning: passing argument 2 of 'variable_test_bit' from incompatible pointer type arch/x86/mm/pat.c:527: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type arch/x86/mm/pat.c:527: warning: passing argument 2 of 'variable_test_bit' from incompatible pointer type arch/x86/mm/pat.c:528: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type arch/x86/mm/pat.c:528: warning: passing argument 2 of 'variable_test_bit' from incompatible pointer type arch/x86/mm/pat.c:529: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type arch/x86/mm/pat.c:529: warning: passing argument 2 of 'variable_test_bit' from incompatible pointer type Don't open-code test_bit() on a __u32 Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- arch/x86/mm/pat.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index a1cbea0b79b1..e83b770676d5 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -536,10 +536,10 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, * we maintain the tradition of paranoia in this code. */ if (!pat_wc_enabled && - ! ( test_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_K6_MTRR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) || - test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability)) && + ! ( boot_cpu_has(X86_FEATURE_MTRR) || + boot_cpu_has(X86_FEATURE_K6_MTRR) || + boot_cpu_has(X86_FEATURE_CYRIX_ARR) || + boot_cpu_has(X86_FEATURE_CENTAUR_MCR)) && (pfn << PAGE_SHIFT) >= __pa(high_memory)) { flags = _PAGE_CACHE_UC; } -- cgit v1.2.3 From 5136dea5734cfddbc6d7ccb7ead85a3ac7ce3de2 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:10:41 -0700 Subject: x86: bitops take an unsigned long * All (or most) other architectures do this. So should x86. Fix. Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/bitops.h | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/include/asm-x86/bitops.h b/include/asm-x86/bitops.h index ee4b3ead6a43..7d2494bdc660 100644 --- a/include/asm-x86/bitops.h +++ b/include/asm-x86/bitops.h @@ -43,7 +43,7 @@ * Note that @nr may be almost arbitrarily large; this function is not * restricted to acting on a single-word quantity. */ -static inline void set_bit(int nr, volatile void *addr) +static inline void set_bit(int nr, volatile unsigned long *addr) { asm volatile(LOCK_PREFIX "bts %1,%0" : ADDR : "Ir" (nr) : "memory"); } @@ -57,7 +57,7 @@ static inline void set_bit(int nr, volatile void *addr) * If it's called on the same region of memory simultaneously, the effect * may be that only one operation succeeds. */ -static inline void __set_bit(int nr, volatile void *addr) +static inline void __set_bit(int nr, volatile unsigned long *addr) { asm volatile("bts %1,%0" : ADDR : "Ir" (nr) : "memory"); } @@ -72,7 +72,7 @@ static inline void __set_bit(int nr, volatile void *addr) * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() * in order to ensure changes are visible on other processors. */ -static inline void clear_bit(int nr, volatile void *addr) +static inline void clear_bit(int nr, volatile unsigned long *addr) { asm volatile(LOCK_PREFIX "btr %1,%0" : ADDR : "Ir" (nr)); } @@ -85,13 +85,13 @@ static inline void clear_bit(int nr, volatile void *addr) * clear_bit() is atomic and implies release semantics before the memory * operation. It can be used for an unlock. */ -static inline void clear_bit_unlock(unsigned nr, volatile void *addr) +static inline void clear_bit_unlock(unsigned nr, volatile unsigned long *addr) { barrier(); clear_bit(nr, addr); } -static inline void __clear_bit(int nr, volatile void *addr) +static inline void __clear_bit(int nr, volatile unsigned long *addr) { asm volatile("btr %1,%0" : ADDR : "Ir" (nr)); } @@ -108,7 +108,7 @@ static inline void __clear_bit(int nr, volatile void *addr) * No memory barrier is required here, because x86 cannot reorder stores past * older loads. Same principle as spin_unlock. */ -static inline void __clear_bit_unlock(unsigned nr, volatile void *addr) +static inline void __clear_bit_unlock(unsigned nr, volatile unsigned long *addr) { barrier(); __clear_bit(nr, addr); @@ -126,7 +126,7 @@ static inline void __clear_bit_unlock(unsigned nr, volatile void *addr) * If it's called on the same region of memory simultaneously, the effect * may be that only one operation succeeds. */ -static inline void __change_bit(int nr, volatile void *addr) +static inline void __change_bit(int nr, volatile unsigned long *addr) { asm volatile("btc %1,%0" : ADDR : "Ir" (nr)); } @@ -140,7 +140,7 @@ static inline void __change_bit(int nr, volatile void *addr) * Note that @nr may be almost arbitrarily large; this function is not * restricted to acting on a single-word quantity. */ -static inline void change_bit(int nr, volatile void *addr) +static inline void change_bit(int nr, volatile unsigned long *addr) { asm volatile(LOCK_PREFIX "btc %1,%0" : ADDR : "Ir" (nr)); } @@ -153,7 +153,7 @@ static inline void change_bit(int nr, volatile void *addr) * This operation is atomic and cannot be reordered. * It also implies a memory barrier. */ -static inline int test_and_set_bit(int nr, volatile void *addr) +static inline int test_and_set_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -170,7 +170,7 @@ static inline int test_and_set_bit(int nr, volatile void *addr) * * This is the same as test_and_set_bit on x86. */ -static inline int test_and_set_bit_lock(int nr, volatile void *addr) +static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr) { return test_and_set_bit(nr, addr); } @@ -184,7 +184,7 @@ static inline int test_and_set_bit_lock(int nr, volatile void *addr) * If two examples of this operation race, one can appear to succeed * but actually fail. You must protect multiple accesses with a lock. */ -static inline int __test_and_set_bit(int nr, volatile void *addr) +static inline int __test_and_set_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -203,7 +203,7 @@ static inline int __test_and_set_bit(int nr, volatile void *addr) * This operation is atomic and cannot be reordered. * It also implies a memory barrier. */ -static inline int test_and_clear_bit(int nr, volatile void *addr) +static inline int test_and_clear_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -223,7 +223,7 @@ static inline int test_and_clear_bit(int nr, volatile void *addr) * If two examples of this operation race, one can appear to succeed * but actually fail. You must protect multiple accesses with a lock. */ -static inline int __test_and_clear_bit(int nr, volatile void *addr) +static inline int __test_and_clear_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -235,7 +235,7 @@ static inline int __test_and_clear_bit(int nr, volatile void *addr) } /* WARNING: non atomic and it can be reordered! */ -static inline int __test_and_change_bit(int nr, volatile void *addr) +static inline int __test_and_change_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -255,7 +255,7 @@ static inline int __test_and_change_bit(int nr, volatile void *addr) * This operation is atomic and cannot be reordered. * It also implies a memory barrier. */ -static inline int test_and_change_bit(int nr, volatile void *addr) +static inline int test_and_change_bit(int nr, volatile unsigned long *addr) { int oldbit; @@ -266,13 +266,13 @@ static inline int test_and_change_bit(int nr, volatile void *addr) return oldbit; } -static inline int constant_test_bit(int nr, const volatile void *addr) +static inline int constant_test_bit(int nr, const volatile unsigned long *addr) { return ((1UL << (nr % BITS_PER_LONG)) & (((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0; } -static inline int variable_test_bit(int nr, volatile const void *addr) +static inline int variable_test_bit(int nr, volatile const unsigned long *addr) { int oldbit; -- cgit v1.2.3 From eef8f871d84b5df1a24902a4e4700188be1aff2c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:34 +0200 Subject: x86: vsmp_64 add missing includes sparse mutters: arch/x86/kernel/vsmp_64.c:126:5: warning: symbol 'is_vsmp_box' was not declared. Should it be static? arch/x86/kernel/vsmp_64.c:145:13: warning: symbol 'vsmp_init' was not declared. Should it be static? Include the appropriate headers. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/vsmp_64.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c index ba8c0b75ab0a..0c029e8959c7 100644 --- a/arch/x86/kernel/vsmp_64.c +++ b/arch/x86/kernel/vsmp_64.c @@ -15,9 +15,12 @@ #include #include #include + +#include #include #include #include +#include #if defined CONFIG_PCI && defined CONFIG_PARAVIRT /* -- cgit v1.2.3 From 535694f361419ca195fd915dd5038c926334e1be Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: x86: boot/printfc use NULL instead 0 Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/boot/printf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/boot/printf.c b/arch/x86/boot/printf.c index c1d00c0274c4..50e47cdbdddd 100644 --- a/arch/x86/boot/printf.c +++ b/arch/x86/boot/printf.c @@ -56,7 +56,7 @@ static char *number(char *str, long num, int base, int size, int precision, if (type & LEFT) type &= ~ZEROPAD; if (base < 2 || base > 36) - return 0; + return NULL; c = (type & ZEROPAD) ? '0' : ' '; sign = 0; if (type & SIGN) { -- cgit v1.2.3 From 635ee418381566f03819408e1303ef21fcf2d41c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: x86: create prototype for (un)map_devmem Global functions need a prototype. Add it. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- include/asm-x86/page.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h index dc936dddf161..ed165097520f 100644 --- a/include/asm-x86/page.h +++ b/include/asm-x86/page.h @@ -51,8 +51,15 @@ #ifndef __ASSEMBLY__ +typedef struct { pgdval_t pgd; } pgd_t; +typedef struct { pgprotval_t pgprot; } pgprot_t; + extern int page_is_ram(unsigned long pagenr); extern int devmem_is_allowed(unsigned long pagenr); +extern void map_devmem(unsigned long pfn, unsigned long size, + pgprot_t vma_prot); +extern void unmap_devmem(unsigned long pfn, unsigned long size, + pgprot_t vma_prot); extern unsigned long max_pfn_mapped; @@ -74,9 +81,6 @@ static inline void copy_user_page(void *to, void *from, unsigned long vaddr, alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) #define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE -typedef struct { pgdval_t pgd; } pgd_t; -typedef struct { pgprotval_t pgprot; } pgprot_t; - static inline pgd_t native_make_pgd(pgdval_t val) { return (pgd_t) { val }; -- cgit v1.2.3 From 0eafe234a2571f51ef9f7e8baddb58c828750771 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: x86: k8topology add missing header k8_scan_nodes is global and needs a prototype. Add the header file which contains it. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/k8topology_64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 1f476e477844..48471199887d 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c @@ -22,6 +22,7 @@ #include #include #include +#include static __init int find_northbridge(void) { -- cgit v1.2.3 From d34c08958fa36c7a8c3f8d9c0ebe6ec1ab744a68 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: x86: k8topology fix shadow variable sparse mutters: arch/x86/mm/k8topology_64.c:108:7: warning: symbol 'nodeid' shadows an earlier one Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/k8topology_64.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 48471199887d..36c6c4a91353 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c @@ -76,10 +76,10 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) { unsigned long prevbase; struct bootnode nodes[8]; - int nodeid, i, nb; + int i, nb; unsigned char nodeids[8]; int found = 0; - u32 reg; + u32 nodeid, reg; unsigned numnodes; unsigned cores; unsigned bits; @@ -106,7 +106,6 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end) prevbase = 0; for (i = 0; i < 8; i++) { unsigned long base, limit; - u32 nodeid; base = read_pci_config(0, nb, 1, 0x40 + i*8); limit = read_pci_config(0, nb, 1, 0x44 + i*8); -- cgit v1.2.3 From 55d4f22abc9f011c5db982f83377cdd38bb9a2a3 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: x86: k8topology cleanup variable declarations Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/k8topology_64.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 36c6c4a91353..0ea66b532c35 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c @@ -74,17 +74,12 @@ static __init void early_get_boot_cpu_id(void) int __init k8_scan_nodes(unsigned long start, unsigned long end) { + unsigned numnodes, cores, bits, apicid_base; unsigned long prevbase; struct bootnode nodes[8]; - int i, nb; unsigned char nodeids[8]; - int found = 0; + int i, j, nb, found = 0; u32 nodeid, reg; - unsigned numnodes; - unsigned cores; - unsigned bits; - int j; - unsigned apicid_base; if (!early_pci_allowed()) return -1; -- cgit v1.2.3 From d1097635deed7196c2a859f285c29267779ca45a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 23:42:01 +0200 Subject: x86: move mmconfig declarations to header arch/x86/kernel/mmconf-fam10h_64.c is missing the prototypes, which are decalred in arch/x86/kernel/setup_64.c. Move the prototypes and the inline stubs to the appropriate header file. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/mmconf-fam10h_64.c | 1 + arch/x86/kernel/setup_64.c | 13 +------------ include/asm-x86/mmconfig.h | 12 ++++++++++++ 3 files changed, 14 insertions(+), 12 deletions(-) create mode 100644 include/asm-x86/mmconfig.h diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index edc5fbfe85c0..fdfdc550b366 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "../pci/pci.h" diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff1286ad8a..341230db74e1 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -71,6 +71,7 @@ #include #include #include +#include #include #ifdef CONFIG_PARAVIRT @@ -293,18 +294,6 @@ static void __init parse_setup_data(void) } } -#ifdef CONFIG_PCI_MMCONFIG -extern void __cpuinit fam10h_check_enable_mmcfg(void); -extern void __init check_enable_amd_mmconf_dmi(void); -#else -void __cpuinit fam10h_check_enable_mmcfg(void) -{ -} -void __init check_enable_amd_mmconf_dmi(void) -{ -} -#endif - /* * setup_arch - architecture-specific boot-time initializations * diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h new file mode 100644 index 000000000000..95beda07c6fa --- /dev/null +++ b/include/asm-x86/mmconfig.h @@ -0,0 +1,12 @@ +#ifndef _ASM_MMCONFIG_H +#define _ASM_MMCONFIG_H + +#ifdef CONFIG_PCI_MMCONFIG +extern void __cpuinit fam10h_check_enable_mmcfg(void); +extern void __init check_enable_amd_mmconf_dmi(void); +#else +static inline void fam10h_check_enable_mmcfg(void) { } +static inline void check_enable_amd_mmconf_dmi(void) { } +#endif + +#endif -- cgit v1.2.3 From 11034d55975be6d8b955a6eb11e87fc67ec086c2 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: x86: init64.c include initrd.h free_initrd_mem needs a prototype, which is in linux/initrd.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/init_64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 32ba13b0f818..18123096cdb9 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From e0b32d768cad17af07af3aced67498bde98296c9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:37 +0200 Subject: x86: make command_line static in setup_64.c Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 341230db74e1..78c1be69c6d3 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -119,7 +119,7 @@ EXPORT_SYMBOL_GPL(edid_info); extern int root_mountflags; -char __initdata command_line[COMMAND_LINE_SIZE]; +static char __initdata command_line[COMMAND_LINE_SIZE]; static struct resource standard_io_resources[] = { { .name = "dma1", .start = 0x00, .end = 0x1f, -- cgit v1.2.3 From 968cbfad1a727b5689ae620f4d970abf6ce73340 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:37 +0200 Subject: x86: make __pci_mmcfg_init static in mmconfig-shared.c Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/pci/mmconfig-shared.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 0cfebecf2a8f..23faaa890ffc 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -374,7 +374,7 @@ reject: static int __initdata known_bridge; -void __init __pci_mmcfg_init(int early) +static void __init __pci_mmcfg_init(int early) { /* MMCONFIG disabled */ if ((pci_probe & PCI_PROBE_MMCONF) == 0) -- cgit v1.2.3 From 311f83494830fec17f086401a5b43984bb447cd2 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 12 May 2008 15:43:37 +0200 Subject: x86: kernel/pci-dma.c cleanups This patch contains the following cleanups: - make the following needlessly global code static: - dma_alloc_pages() Signed-off-by: Adrian Bunk Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/pci-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index c5ef1af8e79d..5bc29ca4196e 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -357,7 +357,7 @@ int dma_supported(struct device *dev, u64 mask) EXPORT_SYMBOL(dma_supported); /* Allocate DMA memory on node near device */ -noinline struct page * +static noinline struct page * dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) { int node; -- cgit v1.2.3 From cca7c0850fa0381639bf84dd06ee900e16346373 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 12 May 2008 15:43:37 +0200 Subject: x86_64: fix mm.txt documentation Commit 85eb69a16aab5a394ce043c2131319eae35e6493 introduced 512 MiB sized kernel and 1.5 GiB sized module space but omitted to change documentation properly. Fix that. [Wasn't the hole intentional protection hole?] Signed-off-by: Jiri Slaby Cc: Andi Kleen Cc: hpa@zytor.com Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- Documentation/x86_64/mm.txt | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/Documentation/x86_64/mm.txt b/Documentation/x86_64/mm.txt index b89b6d2bebfa..efce75097369 100644 --- a/Documentation/x86_64/mm.txt +++ b/Documentation/x86_64/mm.txt @@ -11,9 +11,8 @@ ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB) ... unused hole ... -ffffffff80000000 - ffffffff82800000 (=40 MB) kernel text mapping, from phys 0 -... unused hole ... -ffffffff88000000 - fffffffffff00000 (=1919 MB) module mapping space +ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0 +ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space The direct mapping covers all memory in the system up to the highest memory address (this means in some cases it can also include PCI memory -- cgit v1.2.3 From 6a1673ae2201931ce34bf7ba9f90928c864d8334 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:38 +0200 Subject: x86: make memory_add_physaddr_to_nid depend on MEMORY_HOTPLUG memory_add_physaddr_to_nid() is only used in the CONFIG_MEMORY_HOTPLUG_SPARSE || CONFIG_ACPI_HOTPLUG_MEMORY case. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/srat_64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 3890234e5b26..f6d0584cbf38 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -522,6 +522,7 @@ int __node_distance(int a, int b) EXPORT_SYMBOL(__node_distance); +#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) || defined(CONFIG_ACPI_HOTPLUG_MEMORY) int memory_add_physaddr_to_nid(u64 start) { int i, ret = 0; @@ -533,4 +534,4 @@ int memory_add_physaddr_to_nid(u64 start) return ret; } EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); - +#endif -- cgit v1.2.3 From 4e50e62ce52f39b5f45e82f68b18254458b429bb Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:43:38 +0200 Subject: x86: eliminate duplicate consistency checks in init_32.c Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/init_32.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index ec30d10154b6..4834c0fcb6b7 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -571,17 +571,6 @@ void __init mem_init(void) #endif bad_ppro = ppro_with_ram_bug(); -#ifdef CONFIG_HIGHMEM - /* check that fixmap and pkmap do not overlap */ - if (PKMAP_BASE + LAST_PKMAP*PAGE_SIZE >= FIXADDR_START) { - printk(KERN_ERR - "fixmap and kmap areas overlap - this will crash\n"); - printk(KERN_ERR "pkstart: %lxh pkend: %lxh fixstart %lxh\n", - PKMAP_BASE, PKMAP_BASE + LAST_PKMAP*PAGE_SIZE, - FIXADDR_START); - BUG(); - } -#endif /* this will put all low memory onto the freelists */ totalram_pages += free_all_bootmem(); @@ -614,7 +603,6 @@ void __init mem_init(void) (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)) ); -#if 1 /* double-sanity-check paranoia */ printk(KERN_INFO "virtual kernel memory layout:\n" " fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n" #ifdef CONFIG_HIGHMEM @@ -655,7 +643,6 @@ void __init mem_init(void) #endif BUG_ON(VMALLOC_START > VMALLOC_END); BUG_ON((unsigned long)high_memory > VMALLOC_START); -#endif /* double-sanity-check paranoia */ if (boot_cpu_data.wp_works_ok < 0) test_wp_bit(); -- cgit v1.2.3 From 4c8ab98249fa3cead320ec0ee4cde9960b951989 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:43:38 +0200 Subject: i386: move FIX_ACPI_* into non-permanent range .. as they are used at early boot time only. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/fixmap_32.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/asm-x86/fixmap_32.h b/include/asm-x86/fixmap_32.h index 4b96148e90c1..f0df7ee96816 100644 --- a/include/asm-x86/fixmap_32.h +++ b/include/asm-x86/fixmap_32.h @@ -79,10 +79,6 @@ enum fixed_addresses { FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, #endif -#ifdef CONFIG_ACPI - FIX_ACPI_BEGIN, - FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1, -#endif #ifdef CONFIG_PCI_MMCONFIG FIX_PCIE_MCFG, #endif @@ -103,6 +99,10 @@ enum fixed_addresses { (__end_of_permanent_fixed_addresses & 511), FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS*FIX_BTMAPS_NESTING - 1, FIX_WP_TEST, +#ifdef CONFIG_ACPI + FIX_ACPI_BEGIN, + FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1, +#endif #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT FIX_OHCI1394_BASE, #endif -- cgit v1.2.3 From ebdd561a19d7917ac49fff9c355aa4833c504bf1 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:43:38 +0200 Subject: x86: constify data in reboot.c Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/reboot.c | 18 +++++++++--------- arch/x86/kernel/reboot_fixups_32.c | 4 ++-- include/asm-x86/reboot.h | 2 +- 3 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index f6be7d5f82f8..f8a62160e151 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -27,7 +27,7 @@ void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -static long no_idt[3]; +static const struct desc_ptr no_idt = {}; static int reboot_mode; enum reboot_type reboot_type = BOOT_KBD; int reboot_force; @@ -201,15 +201,15 @@ core_initcall(reboot_init); controller to pulse the CPU reset line, which is more thorough, but doesn't work with at least one type of 486 motherboard. It is easy to stop this code working; hence the copious comments. */ -static unsigned long long +static const unsigned long long real_mode_gdt_entries [3] = { 0x0000000000000000ULL, /* Null descriptor */ - 0x00009a000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ - 0x000092000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ + 0x00009b000000ffffULL, /* 16-bit real-mode 64k code at 0x00000000 */ + 0x000093000100ffffULL /* 16-bit real-mode 64k data at 0x00000100 */ }; -static struct desc_ptr +static const struct desc_ptr real_mode_gdt = { sizeof (real_mode_gdt_entries) - 1, (long)real_mode_gdt_entries }, real_mode_idt = { 0x3ff, 0 }; @@ -231,7 +231,7 @@ real_mode_idt = { 0x3ff, 0 }; More could be done here to set up the registers as if a CPU reset had occurred; hopefully real BIOSs don't assume much. */ -static unsigned char real_mode_switch [] = +static const unsigned char real_mode_switch [] = { 0x66, 0x0f, 0x20, 0xc0, /* movl %cr0,%eax */ 0x66, 0x83, 0xe0, 0x11, /* andl $0x00000011,%eax */ @@ -245,7 +245,7 @@ static unsigned char real_mode_switch [] = 0x24, 0x10, /* f: andb $0x10,al */ 0x66, 0x0f, 0x22, 0xc0 /* movl %eax,%cr0 */ }; -static unsigned char jump_to_bios [] = +static const unsigned char jump_to_bios [] = { 0xea, 0x00, 0x00, 0xff, 0xff /* ljmp $0xffff,$0x0000 */ }; @@ -255,7 +255,7 @@ static unsigned char jump_to_bios [] = * specified by the code and length parameters. * We assume that length will aways be less that 100! */ -void machine_real_restart(unsigned char *code, int length) +void machine_real_restart(const unsigned char *code, int length) { local_irq_disable(); @@ -368,7 +368,7 @@ static void native_machine_emergency_restart(void) } case BOOT_TRIPLE: - load_idt((const struct desc_ptr *)&no_idt); + load_idt(&no_idt); __asm__ __volatile__("int3"); reboot_type = BOOT_KBD; diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c index dec0b5ec25c2..61a837743fe5 100644 --- a/arch/x86/kernel/reboot_fixups_32.c +++ b/arch/x86/kernel/reboot_fixups_32.c @@ -49,7 +49,7 @@ struct device_fixup { void (*reboot_fixup)(struct pci_dev *); }; -static struct device_fixup fixups_table[] = { +static const struct device_fixup fixups_table[] = { { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset }, { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset }, @@ -64,7 +64,7 @@ static struct device_fixup fixups_table[] = { */ void mach_reboot_fixups(void) { - struct device_fixup *cur; + const struct device_fixup *cur; struct pci_dev *dev; int i; diff --git a/include/asm-x86/reboot.h b/include/asm-x86/reboot.h index e63741f19392..206f355786dc 100644 --- a/include/asm-x86/reboot.h +++ b/include/asm-x86/reboot.h @@ -14,8 +14,8 @@ struct machine_ops { extern struct machine_ops machine_ops; -void machine_real_restart(unsigned char *code, int length); void native_machine_crash_shutdown(struct pt_regs *regs); void native_machine_shutdown(void); +void machine_real_restart(const unsigned char *code, int length); #endif /* _ASM_REBOOT_H */ -- cgit v1.2.3 From 9831bfb201a8e00415d0f9e5b5a50d902a90b2db Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 12 May 2008 15:43:38 +0200 Subject: x86 - hide X86_VM_MASK from userland programs v3 X86_VM_MASK is kernel specific flags so hide it from userland programs. It should be defined *before* ptrace.h inclusion because of circular link between these files Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/vm86.h | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/include/asm-x86/vm86.h b/include/asm-x86/vm86.h index 074b357146df..cbf4a0effa75 100644 --- a/include/asm-x86/vm86.h +++ b/include/asm-x86/vm86.h @@ -14,12 +14,6 @@ #include -#ifdef CONFIG_VM86 -#define X86_VM_MASK X86_EFLAGS_VM -#else -#define X86_VM_MASK 0 /* No VM86 support */ -#endif - #define BIOSSEG 0x0f000 #define CPU_086 0 @@ -133,6 +127,13 @@ struct vm86plus_struct { }; #ifdef __KERNEL__ + +#ifdef CONFIG_VM86 +#define X86_VM_MASK X86_EFLAGS_VM +#else +#define X86_VM_MASK 0 /* No VM86 support */ +#endif + /* * This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86 * mode - the main change is that the old segment descriptors aren't -- cgit v1.2.3 From 369101da7e3f6f971b7303922d2978b8483241c6 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 12 May 2008 15:43:38 +0200 Subject: x86: head_64.S cleanup - use predefined flags from processor-flags.h We should better use already defined flags from processor-flags.h instead of defining own ones [>>> object code check >>>] original md5sum: 9cfa6dbf045a046bb5dfb85f8bcfe8c4 arch/x86/kernel/head_64.o text data bss dec hex filename 37361 4432 8192 49985 c341 arch/x86/kernel/head_64.o patched md5sum: 9cfa6dbf045a046bb5dfb85f8bcfe8c4 arch/x86/kernel/head_64.o text data bss dec hex filename 37361 4432 8192 49985 c341 arch/x86/kernel/head_64.o [<<< object code check <<<] Signed-off-by: Cyrill Gorcunov Acked-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_64.S | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 10a1955bb1d1..2f59ca8bd16c 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -18,6 +18,7 @@ #include #include #include +#include #ifdef CONFIG_PARAVIRT #include @@ -184,14 +185,10 @@ ENTRY(secondary_startup_64) 1: wrmsr /* Make changes effective */ /* Setup cr0 */ -#define CR0_PM 1 /* protected mode */ -#define CR0_MP (1<<1) -#define CR0_ET (1<<4) -#define CR0_NE (1<<5) -#define CR0_WP (1<<16) -#define CR0_AM (1<<18) -#define CR0_PAGING (1<<31) - movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax +#define CR0_STATE (X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | \ + X86_CR0_NE | X86_CR0_WP | X86_CR0_AM | \ + X86_CR0_PG) + movl $CR0_STATE, %eax /* Make changes effective */ movq %rax, %cr0 -- cgit v1.2.3 From e83e31f41a623262714d9c56dde7dfc51ac078f7 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 12 May 2008 15:43:39 +0200 Subject: x86: compressed/head_64.S cleanup - use predefined flags from processor-flags.h We should better use already defined flags from processor-flags.h instead of defining own ones [>>> object code check >>>] original md5sum: 129f24be6df396fb7d8bf998c01fc716 arch/x86/boot/compressed/head_64.o text data bss dec hex filename 705 48 45056 45809 b2f1 arch/x86/boot/compressed/head_64.o patched md5sum: 129f24be6df396fb7d8bf998c01fc716 arch/x86/boot/compressed/head_64-new.o text data bss dec hex filename 705 48 45056 45809 b2f1 arch/x86/boot/compressed/head_64-new.o [<<< object code check <<<] Signed-off-by: Cyrill Gorcunov Acked-by: H. Peter Anvin Signed-off-by: Ingo Molnar --- arch/x86/boot/compressed/head_64.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index d8819efac81d..1d5dff4123e1 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -30,6 +30,7 @@ #include #include #include +#include #include .section ".text.head" @@ -109,7 +110,7 @@ startup_32: /* Enable PAE mode */ xorl %eax, %eax - orl $(1 << 5), %eax + orl $(X86_CR4_PAE), %eax movl %eax, %cr4 /* @@ -170,7 +171,7 @@ startup_32: pushl %eax /* Enter paged protected Mode, activating Long Mode */ - movl $0x80000001, %eax /* Enable Paging and Protected mode */ + movl $(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */ movl %eax, %cr0 /* Jump from 32bit compatibility mode into 64bit mode. */ -- cgit v1.2.3 From 2cc74111c78dbc7b26c41b4e87cfebfc3aed49c4 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 11 May 2008 19:35:54 +0800 Subject: x86: ipi.c: removed duplicated include Removed duplicated include in arch/x86/kernel/ipi.c. Signed-off-by: Huang Weiyi Cc: mingo@redhat.com Cc: hpa@zytor.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/ipi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c index c0df7b89ca23..9d98cda39ad9 100644 --- a/arch/x86/kernel/ipi.c +++ b/arch/x86/kernel/ipi.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3 From 883b7af932b4435eb4798cfa4fec0848639c2a87 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 11 May 2008 19:36:57 +0800 Subject: x86: smpboot.c: removed duplicated include Removed duplicated include in arch/x86/kernel/smpboot.c. Signed-off-by: Huang Weiyi Cc: mingo@redhat.com Cc: hpa@zytor.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/smpboot.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 38988491c622..0974fc0997b9 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -59,7 +59,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 2237ce2057b82561f7ea27ed30153571f404112d Mon Sep 17 00:00:00 2001 From: Fernando Luis Vazquez Cao Date: Fri, 16 May 2008 11:01:26 +0900 Subject: x86: cleanup, remove duplicate declaration of unknown_nmi_panic Signed-off-by: Fernando Luis Vazquez Cao Signed-off-by: Ingo Molnar --- include/asm-x86/nmi.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 1e363021e72f..8455bf36d8df 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -46,7 +46,6 @@ extern void nmi_watchdog_default(void); extern int check_nmi_watchdog(void); extern int nmi_watchdog_enabled; -extern int unknown_nmi_panic; extern int avail_to_resrv_perfctr_nmi_bit(unsigned int); extern int avail_to_resrv_perfctr_nmi(unsigned int); extern int reserve_perfctr_nmi(unsigned int); -- cgit v1.2.3 From 05139d8fb445d9a3569071af1c5920fc46191b7b Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Tue, 13 May 2008 21:14:22 +0400 Subject: x86: head_64.S cleanup - use straight move to CR4 register Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_64.S | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 2f59ca8bd16c..7475b4c91f05 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -155,9 +155,7 @@ ENTRY(secondary_startup_64) */ /* Enable PAE mode and PGE */ - xorq %rax, %rax - btsq $5, %rax - btsq $7, %rax + movl $(X86_CR4_PAE | X86_CR4_PGE), %eax movq %rax, %cr4 /* Setup early boot stage 4 level pagetables. */ -- cgit v1.2.3 From 0e192b99d7d09f08b445c31ee7c7f3d0bfb27345 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Tue, 13 May 2008 20:55:40 +0400 Subject: x86: head_64.S cleanup - use PMD_SHIFT instead of numeric constant Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_64.S | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 7475b4c91f05..d8ed3259e6e4 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -322,11 +322,11 @@ early_idt_ripmsg: ENTRY(name) /* Automate the creation of 1 to 1 mapping pmd entries */ -#define PMDS(START, PERM, COUNT) \ - i = 0 ; \ - .rept (COUNT) ; \ - .quad (START) + (i << 21) + (PERM) ; \ - i = i + 1 ; \ +#define PMDS(START, PERM, COUNT) \ + i = 0 ; \ + .rept (COUNT) ; \ + .quad (START) + (i << PMD_SHIFT) + (PERM) ; \ + i = i + 1 ; \ .endr /* -- cgit v1.2.3 From 23eb271b9186531e1eb704dda9ab37abcfd0ca4a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:10:39 -0700 Subject: x86: setup_force_cpu_cap(): don't do clear_bit(non-unsigned-long) Another hack to make proper prototyping of x86 bitops viable. Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar --- include/asm-x86/cpufeature.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 0d609c837a41..78b47e7404eb 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -142,11 +142,11 @@ extern const char * const x86_power_flags[32]; #define clear_cpu_cap(c, bit) clear_bit(bit, (unsigned long *)((c)->x86_capability)) #define setup_clear_cpu_cap(bit) do { \ clear_cpu_cap(&boot_cpu_data, bit); \ - set_bit(bit, cleared_cpu_caps); \ + set_bit(bit, (unsigned long *)cleared_cpu_caps); \ } while (0) #define setup_force_cpu_cap(bit) do { \ set_cpu_cap(&boot_cpu_data, bit); \ - clear_bit(bit, cleared_cpu_caps); \ + clear_bit(bit, (unsigned long *)cleared_cpu_caps); \ } while (0) #define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU) -- cgit v1.2.3 From bfe4bb1526945e446d2912bef2e1e2cbd2c7349e Mon Sep 17 00:00:00 2001 From: Miklos Vajna Date: Sat, 17 May 2008 22:48:13 +0200 Subject: x86: janitor work in bugs.c Just moved trailing statements to the next line, removed space before open/close parenthesis, wrapped long lines. Signed-off-by: Miklos Vajna Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/bugs.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 170d2f5523b2..1b1c56bb338f 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -59,8 +59,12 @@ static void __init check_fpu(void) return; } -/* trap_init() enabled FXSR and company _before_ testing for FP problems here. */ - /* Test for the divl bug.. */ + /* + * trap_init() enabled FXSR and company _before_ testing for FP + * problems here. + * + * Test for the divl bug.. + */ __asm__("fninit\n\t" "fldl %1\n\t" "fdivl %2\n\t" @@ -108,10 +112,15 @@ static void __init check_popad(void) "movl $12345678,%%eax; movl $0,%%edi; pusha; popa; movl (%%edx,%%edi),%%ecx " : "=&a" (res) : "d" (inp) - : "ecx", "edi" ); - /* If this fails, it means that any user program may lock the CPU hard. Too bad. */ - if (res != 12345678) printk( "Buggy.\n" ); - else printk( "OK.\n" ); + : "ecx", "edi"); + /* + * If this fails, it means that any user program may lock the + * CPU hard. Too bad. + */ + if (res != 12345678) + printk("Buggy.\n"); + else + printk("OK.\n"); #endif } @@ -137,7 +146,8 @@ static void __init check_config(void) * i486+ only features! (WP works in supervisor mode and the * new "invlpg" and "bswap" instructions) */ -#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_BSWAP) +#if defined(CONFIG_X86_WP_WORKS_OK) || defined(CONFIG_X86_INVLPG) || \ + defined(CONFIG_X86_BSWAP) if (boot_cpu_data.x86 == 3) panic("Kernel requires i486+ for 'invlpg' and other features"); #endif @@ -170,6 +180,7 @@ void __init check_bugs(void) check_fpu(); check_hlt(); check_popad(); - init_utsname()->machine[1] = '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); + init_utsname()->machine[1] = + '0' + (boot_cpu_data.x86 > 6 ? 6 : boot_cpu_data.x86); alternative_instructions(); } -- cgit v1.2.3 From f0766440dda7ace8a43b030f75e2dcb82449fb85 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Fri, 9 May 2008 19:09:48 -0700 Subject: x86: unify current.h Simply stitch these together. There are just two definitions that are shared but the file is resonably small and putting these things together shows that further unifications requires a unification of the per cpu / pda handling between both arches. Signed-off-by: Christoph Lameter Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/current.h | 42 ++++++++++++++++++++++++++++++++++++++---- include/asm-x86/current_32.h | 17 ----------------- include/asm-x86/current_64.h | 27 --------------------------- 3 files changed, 38 insertions(+), 48 deletions(-) delete mode 100644 include/asm-x86/current_32.h delete mode 100644 include/asm-x86/current_64.h diff --git a/include/asm-x86/current.h b/include/asm-x86/current.h index d2526d3f7346..7515c19d4988 100644 --- a/include/asm-x86/current.h +++ b/include/asm-x86/current.h @@ -1,5 +1,39 @@ +#ifndef _X86_CURRENT_H +#define _X86_CURRENT_H + #ifdef CONFIG_X86_32 -# include "current_32.h" -#else -# include "current_64.h" -#endif +#include +#include + +struct task_struct; + +DECLARE_PER_CPU(struct task_struct *, current_task); +static __always_inline struct task_struct *get_current(void) +{ + return x86_read_percpu(current_task); +} + +#else /* X86_32 */ + +#ifndef __ASSEMBLY__ +#include + +struct task_struct; + +static __always_inline struct task_struct *get_current(void) +{ + return read_pda(pcurrent); +} + +#else /* __ASSEMBLY__ */ + +#include +#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg + +#endif /* __ASSEMBLY__ */ + +#endif /* X86_32 */ + +#define current get_current() + +#endif /* X86_CURRENT_H */ diff --git a/include/asm-x86/current_32.h b/include/asm-x86/current_32.h deleted file mode 100644 index 5af9bdb97a16..000000000000 --- a/include/asm-x86/current_32.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _I386_CURRENT_H -#define _I386_CURRENT_H - -#include -#include - -struct task_struct; - -DECLARE_PER_CPU(struct task_struct *, current_task); -static __always_inline struct task_struct *get_current(void) -{ - return x86_read_percpu(current_task); -} - -#define current get_current() - -#endif /* !(_I386_CURRENT_H) */ diff --git a/include/asm-x86/current_64.h b/include/asm-x86/current_64.h deleted file mode 100644 index 2d368ede2fc1..000000000000 --- a/include/asm-x86/current_64.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef _X86_64_CURRENT_H -#define _X86_64_CURRENT_H - -#if !defined(__ASSEMBLY__) -struct task_struct; - -#include - -static inline struct task_struct *get_current(void) -{ - struct task_struct *t = read_pda(pcurrent); - return t; -} - -#define current get_current() - -#else - -#ifndef ASM_OFFSET_H -#include -#endif - -#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg - -#endif - -#endif /* !(_X86_64_CURRENT_H) */ -- cgit v1.2.3 From 2141261a11524acbfce86a5a213bbaea08794bbb Mon Sep 17 00:00:00 2001 From: Miklos Vajna Date: Tue, 13 May 2008 13:35:25 +0200 Subject: x86: janitor work in video-vga.c Just moved an open brace to the previous line. Signed-off-by: Miklos Vajna Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/boot/video-vga.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c index 40ecb8d7688c..b939cb476dec 100644 --- a/arch/x86/boot/video-vga.c +++ b/arch/x86/boot/video-vga.c @@ -259,8 +259,7 @@ static int vga_probe(void) return mode_count[adapter]; } -__videocard video_vga = -{ +__videocard video_vga = { .card_name = "VGA", .probe = vga_probe, .set_mode = vga_set_mode, -- cgit v1.2.3 From 78d64fc21d2aa425c65de49765cddecc84d595a4 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 12 May 2008 15:44:39 +0200 Subject: x86: include/asm-x86/string_32.h - style only Looked at this file because of __memcpy warnings. Thought it could use a style/checkpatch cleanup. No change in vmlinux. [tglx: fixed the remaining issues ] Signed-off-by: Joe Perches Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- include/asm-x86/string_32.h | 316 +++++++++++++++++++++++++------------------- 1 file changed, 181 insertions(+), 135 deletions(-) diff --git a/include/asm-x86/string_32.h b/include/asm-x86/string_32.h index b49369ad9a61..8d0c593c4413 100644 --- a/include/asm-x86/string_32.h +++ b/include/asm-x86/string_32.h @@ -29,81 +29,116 @@ extern char *strchr(const char *s, int c); #define __HAVE_ARCH_STRLEN extern size_t strlen(const char *s); -static __always_inline void * __memcpy(void * to, const void * from, size_t n) +static __always_inline void *__memcpy(void *to, const void *from, size_t n) { -int d0, d1, d2; -__asm__ __volatile__( - "rep ; movsl\n\t" - "movl %4,%%ecx\n\t" - "andl $3,%%ecx\n\t" - "jz 1f\n\t" - "rep ; movsb\n\t" - "1:" - : "=&c" (d0), "=&D" (d1), "=&S" (d2) - : "0" (n/4), "g" (n), "1" ((long) to), "2" ((long) from) - : "memory"); -return (to); + int d0, d1, d2; + asm volatile("rep ; movsl\n\t" + "movl %4,%%ecx\n\t" + "andl $3,%%ecx\n\t" + "jz 1f\n\t" + "rep ; movsb\n\t" + "1:" + : "=&c" (d0), "=&D" (d1), "=&S" (d2) + : "0" (n / 4), "g" (n), "1" ((long)to), "2" ((long)from) + : "memory"); + return to; } /* * This looks ugly, but the compiler can optimize it totally, * as the count is constant. */ -static __always_inline void * __constant_memcpy(void * to, const void * from, size_t n) +static __always_inline void *__constant_memcpy(void *to, const void *from, + size_t n) { long esi, edi; - if (!n) return to; -#if 1 /* want to do small copies with non-string ops? */ + if (!n) + return to; + switch (n) { - case 1: *(char*)to = *(char*)from; return to; - case 2: *(short*)to = *(short*)from; return to; - case 4: *(int*)to = *(int*)from; return to; -#if 1 /* including those doable with two moves? */ - case 3: *(short*)to = *(short*)from; - *((char*)to+2) = *((char*)from+2); return to; - case 5: *(int*)to = *(int*)from; - *((char*)to+4) = *((char*)from+4); return to; - case 6: *(int*)to = *(int*)from; - *((short*)to+2) = *((short*)from+2); return to; - case 8: *(int*)to = *(int*)from; - *((int*)to+1) = *((int*)from+1); return to; -#endif + case 1: + *(char *)to = *(char *)from; + return to; + case 2: + *(short *)to = *(short *)from; + return to; + case 4: + *(int *)to = *(int *)from; + return to; + + case 3: + *(short *)to = *(short *)from; + *((char *)to + 2) = *((char *)from + 2); + return to; + case 5: + *(int *)to = *(int *)from; + *((char *)to + 4) = *((char *)from + 4); + return to; + case 6: + *(int *)to = *(int *)from; + *((short *)to + 2) = *((short *)from + 2); + return to; + case 8: + *(int *)to = *(int *)from; + *((int *)to + 1) = *((int *)from + 1); + return to; } -#endif - esi = (long) from; - edi = (long) to; - if (n >= 5*4) { + + esi = (long)from; + edi = (long)to; + if (n >= 5 * 4) { /* large block: use rep prefix */ int ecx; - __asm__ __volatile__( - "rep ; movsl" - : "=&c" (ecx), "=&D" (edi), "=&S" (esi) - : "0" (n/4), "1" (edi),"2" (esi) - : "memory" + asm volatile("rep ; movsl" + : "=&c" (ecx), "=&D" (edi), "=&S" (esi) + : "0" (n / 4), "1" (edi), "2" (esi) + : "memory" ); } else { /* small block: don't clobber ecx + smaller code */ - if (n >= 4*4) __asm__ __volatile__("movsl" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - if (n >= 3*4) __asm__ __volatile__("movsl" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - if (n >= 2*4) __asm__ __volatile__("movsl" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - if (n >= 1*4) __asm__ __volatile__("movsl" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); + if (n >= 4 * 4) + asm volatile("movsl" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + if (n >= 3 * 4) + asm volatile("movsl" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + if (n >= 2 * 4) + asm volatile("movsl" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + if (n >= 1 * 4) + asm volatile("movsl" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); } switch (n % 4) { /* tail */ - case 0: return to; - case 1: __asm__ __volatile__("movsb" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - return to; - case 2: __asm__ __volatile__("movsw" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - return to; - default: __asm__ __volatile__("movsw\n\tmovsb" - :"=&D"(edi),"=&S"(esi):"0"(edi),"1"(esi):"memory"); - return to; + case 0: + return to; + case 1: + asm volatile("movsb" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + return to; + case 2: + asm volatile("movsw" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + return to; + default: + asm volatile("movsw\n\tmovsb" + : "=&D"(edi), "=&S"(esi) + : "0"(edi), "1"(esi) + : "memory"); + return to; } } @@ -117,87 +152,86 @@ static __always_inline void * __constant_memcpy(void * to, const void * from, si * This CPU favours 3DNow strongly (eg AMD Athlon) */ -static inline void * __constant_memcpy3d(void * to, const void * from, size_t len) +static inline void *__constant_memcpy3d(void *to, const void *from, size_t len) { if (len < 512) return __constant_memcpy(to, from, len); return _mmx_memcpy(to, from, len); } -static __inline__ void *__memcpy3d(void *to, const void *from, size_t len) +static inline void *__memcpy3d(void *to, const void *from, size_t len) { if (len < 512) return __memcpy(to, from, len); return _mmx_memcpy(to, from, len); } -#define memcpy(t, f, n) \ -(__builtin_constant_p(n) ? \ - __constant_memcpy3d((t),(f),(n)) : \ - __memcpy3d((t),(f),(n))) +#define memcpy(t, f, n) \ + (__builtin_constant_p((n)) \ + ? __constant_memcpy3d((t), (f), (n)) \ + : __memcpy3d((t), (f), (n))) #else /* * No 3D Now! */ - -#define memcpy(t, f, n) \ -(__builtin_constant_p(n) ? \ - __constant_memcpy((t),(f),(n)) : \ - __memcpy((t),(f),(n))) + +#define memcpy(t, f, n) \ + (__builtin_constant_p((n)) \ + ? __constant_memcpy((t), (f), (n)) \ + : __memcpy((t), (f), (n))) #endif #define __HAVE_ARCH_MEMMOVE -void *memmove(void * dest,const void * src, size_t n); +void *memmove(void *dest, const void *src, size_t n); #define memcmp __builtin_memcmp #define __HAVE_ARCH_MEMCHR -extern void *memchr(const void * cs,int c,size_t count); +extern void *memchr(const void *cs, int c, size_t count); -static inline void * __memset_generic(void * s, char c,size_t count) +static inline void *__memset_generic(void *s, char c, size_t count) { -int d0, d1; -__asm__ __volatile__( - "rep\n\t" - "stosb" - : "=&c" (d0), "=&D" (d1) - :"a" (c),"1" (s),"0" (count) - :"memory"); -return s; + int d0, d1; + asm volatile("rep\n\t" + "stosb" + : "=&c" (d0), "=&D" (d1) + : "a" (c), "1" (s), "0" (count) + : "memory"); + return s; } /* we might want to write optimized versions of these later */ -#define __constant_count_memset(s,c,count) __memset_generic((s),(c),(count)) +#define __constant_count_memset(s, c, count) __memset_generic((s), (c), (count)) /* - * memset(x,0,y) is a reasonably common thing to do, so we want to fill + * memset(x, 0, y) is a reasonably common thing to do, so we want to fill * things 32 bits at a time even when we don't know the size of the * area at compile-time.. */ -static __always_inline void * __constant_c_memset(void * s, unsigned long c, size_t count) +static __always_inline +void *__constant_c_memset(void *s, unsigned long c, size_t count) { -int d0, d1; -__asm__ __volatile__( - "rep ; stosl\n\t" - "testb $2,%b3\n\t" - "je 1f\n\t" - "stosw\n" - "1:\ttestb $1,%b3\n\t" - "je 2f\n\t" - "stosb\n" - "2:" - :"=&c" (d0), "=&D" (d1) - :"a" (c), "q" (count), "0" (count/4), "1" ((long) s) - :"memory"); -return (s); + int d0, d1; + asm volatile("rep ; stosl\n\t" + "testb $2,%b3\n\t" + "je 1f\n\t" + "stosw\n" + "1:\ttestb $1,%b3\n\t" + "je 2f\n\t" + "stosb\n" + "2:" + : "=&c" (d0), "=&D" (d1) + : "a" (c), "q" (count), "0" (count/4), "1" ((long)s) + : "memory"); + return s; } /* Added by Gertjan van Wingerde to make minix and sysv module work */ #define __HAVE_ARCH_STRNLEN -extern size_t strnlen(const char * s, size_t count); +extern size_t strnlen(const char *s, size_t count); /* end of additional stuff */ #define __HAVE_ARCH_STRSTR @@ -207,66 +241,78 @@ extern char *strstr(const char *cs, const char *ct); * This looks horribly ugly, but the compiler can optimize it totally, * as we by now know that both pattern and count is constant.. */ -static __always_inline void * __constant_c_and_count_memset(void * s, unsigned long pattern, size_t count) +static __always_inline +void *__constant_c_and_count_memset(void *s, unsigned long pattern, + size_t count) { switch (count) { + case 0: + return s; + case 1: + *(unsigned char *)s = pattern & 0xff; + return s; + case 2: + *(unsigned short *)s = pattern & 0xffff; + return s; + case 3: + *(unsigned short *)s = pattern & 0xffff; + *((unsigned char *)s + 2) = pattern & 0xff; + return s; + case 4: + *(unsigned long *)s = pattern; + return s; + } + +#define COMMON(x) \ + asm volatile("rep ; stosl" \ + x \ + : "=&c" (d0), "=&D" (d1) \ + : "a" (pattern), "0" (count/4), "1" ((long)s) \ + : "memory") + + { + int d0, d1; + switch (count % 4) { case 0: + COMMON(""); return s; case 1: - *(unsigned char *)s = pattern & 0xff; + COMMON("\n\tstosb"); return s; case 2: - *(unsigned short *)s = pattern & 0xffff; + COMMON("\n\tstosw"); return s; - case 3: - *(unsigned short *)s = pattern & 0xffff; - *(2+(unsigned char *)s) = pattern & 0xff; + default: + COMMON("\n\tstosw\n\tstosb"); return s; - case 4: - *(unsigned long *)s = pattern; - return s; - } -#define COMMON(x) \ -__asm__ __volatile__( \ - "rep ; stosl" \ - x \ - : "=&c" (d0), "=&D" (d1) \ - : "a" (pattern),"0" (count/4),"1" ((long) s) \ - : "memory") -{ - int d0, d1; - switch (count % 4) { - case 0: COMMON(""); return s; - case 1: COMMON("\n\tstosb"); return s; - case 2: COMMON("\n\tstosw"); return s; - default: COMMON("\n\tstosw\n\tstosb"); return s; + } } -} - + #undef COMMON } -#define __constant_c_x_memset(s, c, count) \ -(__builtin_constant_p(count) ? \ - __constant_c_and_count_memset((s),(c),(count)) : \ - __constant_c_memset((s),(c),(count))) +#define __constant_c_x_memset(s, c, count) \ + (__builtin_constant_p(count) \ + ? __constant_c_and_count_memset((s), (c), (count)) \ + : __constant_c_memset((s), (c), (count))) -#define __memset(s, c, count) \ -(__builtin_constant_p(count) ? \ - __constant_count_memset((s),(c),(count)) : \ - __memset_generic((s),(c),(count))) +#define __memset(s, c, count) \ + (__builtin_constant_p(count) \ + ? __constant_count_memset((s), (c), (count)) \ + : __memset_generic((s), (c), (count))) #define __HAVE_ARCH_MEMSET -#define memset(s, c, count) \ -(__builtin_constant_p(c) ? \ - __constant_c_x_memset((s),(0x01010101UL*(unsigned char)(c)),(count)) : \ - __memset((s),(c),(count))) +#define memset(s, c, count) \ + (__builtin_constant_p(c) \ + ? __constant_c_x_memset((s), (0x01010101UL * (unsigned char)(c)), \ + (count)) \ + : __memset((s), (c), (count))) /* * find the first occurrence of byte 'c', or 1 past the area if none */ #define __HAVE_ARCH_MEMSCAN -extern void *memscan(void * addr, int c, size_t size); +extern void *memscan(void *addr, int c, size_t size); #endif /* __KERNEL__ */ -- cgit v1.2.3 From 83cd1daa1dc3400e5ca2255818641233ebb30680 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 12 May 2008 15:44:39 +0200 Subject: x86: eliminate dead code in x86_64 entry.S Remove the not longer used handlers for reserved vectors. Signed-off-by: Jan Beulich Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/entry_64.S | 4 ---- arch/x86/kernel/traps_64.c | 3 --- 2 files changed, 7 deletions(-) diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 556a8df522a7..1f1751dfb2f3 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -1120,10 +1120,6 @@ ENTRY(coprocessor_segment_overrun) zeroentry do_coprocessor_segment_overrun END(coprocessor_segment_overrun) -ENTRY(reserved) - zeroentry do_reserved -END(reserved) - /* runs on exception stack */ ENTRY(double_fault) XCPT_FRAME diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index adff76ea97c4..ec6d3b2130c4 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -71,7 +71,6 @@ asmlinkage void general_protection(void); asmlinkage void page_fault(void); asmlinkage void coprocessor_error(void); asmlinkage void simd_coprocessor_error(void); -asmlinkage void reserved(void); asmlinkage void alignment_check(void); asmlinkage void machine_check(void); asmlinkage void spurious_interrupt_bug(void); @@ -702,12 +701,10 @@ DO_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip) DO_ERROR( 4, SIGSEGV, "overflow", overflow) DO_ERROR( 5, SIGSEGV, "bounds", bounds) DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip) -DO_ERROR( 7, SIGSEGV, "device not available", device_not_available) DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) -DO_ERROR(18, SIGSEGV, "reserved", reserved) /* Runs on IST stack */ asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code) -- cgit v1.2.3 From 48e239572271cf79412d90753a721242a765f7d9 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 24 May 2008 17:24:34 +0200 Subject: x86: fixup the fallout of the bitops changes Signed-off-by: Thomas Gleixner --- arch/x86/mm/pgtable.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index 50159764f694..ee1d6d39edd4 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -255,7 +255,7 @@ int ptep_test_and_clear_young(struct vm_area_struct *vma, if (pte_young(*ptep)) ret = test_and_clear_bit(_PAGE_BIT_ACCESSED, - &ptep->pte); + (unsigned long *) &ptep->pte); if (ret) pte_update(vma->vm_mm, addr, ptep); -- cgit v1.2.3 From 668a6c3654560aef8741642478973e205a4f02bf Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 19 May 2008 13:35:24 +0200 Subject: - fix mmioftrace + rcu merge interaction Signed-off-by: Thomas Gleixner --- arch/x86/mm/kmmio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index b65871e6bba6..93d82038af4b 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -6,6 +6,7 @@ */ #include +#include #include #include #include -- cgit v1.2.3 From c9fea78dc9775981bed2da379568c8a8fddd1fb6 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 19 May 2008 13:53:39 +0200 Subject: x86: make NUMAQ depend on PCI NUMAQ depends on the existence of PCI hardware, and requiring PCI makes this subarch simpler and avoids build failures if PCI is disabled. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bbafeac89116..029372813ae2 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -270,7 +270,7 @@ config X86_VOYAGER config X86_NUMAQ bool "NUMAQ (IBM/Sequent)" - depends on SMP && X86_32 + depends on SMP && X86_32 && PCI select NUMA help This option is used for getting Linux to run on a (IBM/Sequent) NUMA -- cgit v1.2.3 From 1ac97018169c5a13feaa90d9671f2d6ba2d9e86e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 19 May 2008 14:10:14 +0200 Subject: x86: untangle pci dependencies make PCI-less subarches not build with PCI - instead of complicating the PCI dependencies. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 029372813ae2..78700f5faf62 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -258,7 +258,7 @@ config X86_ELAN config X86_VOYAGER bool "Voyager (NCR)" - depends on X86_32 && (SMP || BROKEN) + depends on X86_32 && (SMP || BROKEN) && !PCI help Voyager is an MCA-based 32-way capable SMP architecture proprietary to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based. @@ -300,7 +300,7 @@ config X86_BIGSMP config X86_VISWS bool "SGI 320/540 (Visual Workstation)" - depends on X86_32 + depends on X86_32 && !PCI help The SGI Visual Workstation series is an IA32-based workstation based on SGI systems chips with some legacy PC hardware attached. @@ -344,7 +344,7 @@ config X86_RDC321X config X86_VSMP bool "Support for ScaleMP vSMP" select PARAVIRT - depends on X86_64 + depends on X86_64 && !PCI help Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is supposed to run on these EM64T-based machines. Only choose this option @@ -1477,8 +1477,7 @@ endmenu menu "Bus options (PCI etc.)" config PCI - bool "PCI support" if !X86_VISWS && !X86_VSMP - depends on !X86_VOYAGER + bool "PCI support" default y select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) help -- cgit v1.2.3 From 0da72a4aeb4482c64c1142a2e36b556d13374937 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 30 Apr 2008 20:11:51 +0200 Subject: x86: fix sparse warning in mtrr/generic.c arch/x86/kernel/cpu/mtrr/generic.c:216:12: warning: symbol 'lo' shadows an earlier one Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/generic.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 5d241ce94a44..0625d4158e58 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -213,12 +213,12 @@ void __init get_mtrr_state(void) mtrr_state.enabled = (lo & 0xc00) >> 10; if (amd_special_default_mtrr()) { - unsigned lo, hi; + unsigned low, high; /* TOP_MEM2 */ - rdmsr(MSR_K8_TOP_MEM2, lo, hi); - tom2 = hi; + rdmsr(MSR_K8_TOP_MEM2, low, high); + tom2 = high; tom2 <<= 32; - tom2 |= lo; + tom2 |= low; tom2 &= 0xffffff8000000ULL; } if (mtrr_show) { -- cgit v1.2.3 From 0dbfafa5fcd4dd189e2adc7b6ed9e0405e846d79 Mon Sep 17 00:00:00 2001 From: Alexander van Heukelum Date: Wed, 23 Apr 2008 15:09:05 +0200 Subject: x86: move i386 memory setup code to e820_32.c The x86_64 code has centralized the memory setup code in e820_64.c. This patch copies that approach to i386: - early_param("mem", ...) parsing is moved from setup_32.c to e820_32.c. - setup_memory_map() and finish_e820_parsing() are factored out from setup_arch(), and declarations are added to e820_32.h. - print_memory_map() is made static and removed from e820_32.h. - user_defined_memmap is marked as __initdata. Signed-off-by: Alexander van Heukelum Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/e820_32.c | 60 ++++++++++++++++++++++++++++++++++++++++++++-- arch/x86/kernel/setup_32.c | 50 ++------------------------------------ include/asm-x86/e820_32.h | 4 +++- 3 files changed, 63 insertions(+), 51 deletions(-) diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index ed733e7cf4e6..31ea2bb8c91a 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -30,7 +30,6 @@ unsigned long pci_mem_start = 0x10000000; #ifdef CONFIG_PCI EXPORT_SYMBOL(pci_mem_start); #endif -extern int user_defined_memmap; static struct resource system_rom_resource = { .name = "System ROM", @@ -584,7 +583,7 @@ void __init e820_register_memory(void) pci_mem_start, gapstart, gapsize); } -void __init print_memory_map(char *who) +static void __init print_memory_map(char *who) { int i; @@ -692,6 +691,54 @@ e820_all_mapped(unsigned long s, unsigned long e, unsigned type) return 0; } +/* Overridden in paravirt.c if CONFIG_PARAVIRT */ +char * __init __attribute__((weak)) memory_setup(void) +{ + return machine_specific_memory_setup(); +} + +void __init setup_memory_map(void) +{ + printk(KERN_INFO "BIOS-provided physical RAM map:\n"); + print_memory_map(memory_setup()); +} + +static int __initdata user_defined_memmap; + +/* + * "mem=nopentium" disables the 4MB page tables. + * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM + * to , overriding the bios size. + * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from + * to +, overriding the bios size. + * + * HPA tells me bootloaders need to parse mem=, so no new + * option should be mem= [also see Documentation/i386/boot.txt] + */ +static int __init parse_mem(char *arg) +{ + if (!arg) + return -EINVAL; + + if (strcmp(arg, "nopentium") == 0) { + setup_clear_cpu_cap(X86_FEATURE_PSE); + } else { + /* If the user specifies memory size, we + * limit the BIOS-provided memory map to + * that size. exactmap can be used to specify + * the exact map. mem=number can be used to + * trim the existing memory map. + */ + unsigned long long mem_size; + + mem_size = memparse(arg, &arg); + limit_regions(mem_size); + user_defined_memmap = 1; + } + return 0; +} +early_param("mem", parse_mem); + static int __init parse_memmap(char *arg) { if (!arg) @@ -762,6 +809,15 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, new_type); } } + +void __init finish_e820_parsing(void) +{ + if (user_defined_memmap) { + printk(KERN_INFO "user-defined physical RAM map:\n"); + print_memory_map("user"); + } +} + void __init update_e820(void) { u8 nr_map; diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 2c5f8b213e86..b54c79c91efd 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -237,42 +237,6 @@ static inline void copy_edd(void) } #endif -int __initdata user_defined_memmap; - -/* - * "mem=nopentium" disables the 4MB page tables. - * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM - * to , overriding the bios size. - * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from - * to +, overriding the bios size. - * - * HPA tells me bootloaders need to parse mem=, so no new - * option should be mem= [also see Documentation/i386/boot.txt] - */ -static int __init parse_mem(char *arg) -{ - if (!arg) - return -EINVAL; - - if (strcmp(arg, "nopentium") == 0) { - setup_clear_cpu_cap(X86_FEATURE_PSE); - } else { - /* If the user specifies memory size, we - * limit the BIOS-provided memory map to - * that size. exactmap can be used to specify - * the exact map. mem=number can be used to - * trim the existing memory map. - */ - unsigned long long mem_size; - - mem_size = memparse(arg, &arg); - limit_regions(mem_size); - user_defined_memmap = 1; - } - return 0; -} -early_param("mem", parse_mem); - #ifdef CONFIG_PROC_VMCORE /* elfcorehdr= specifies the location of elf core header * stored by the crashed kernel. @@ -725,12 +689,6 @@ static void set_mca_bus(int x) static void set_mca_bus(int x) { } #endif -/* Overridden in paravirt.c if CONFIG_PARAVIRT */ -char * __init __attribute__((weak)) memory_setup(void) -{ - return machine_specific_memory_setup(); -} - #ifdef CONFIG_NUMA /* * In the golden day, when everything among i386 and x86_64 will be @@ -786,8 +744,7 @@ void __init setup_arch(char **cmdline_p) #endif ARCH_SETUP - printk(KERN_INFO "BIOS-provided physical RAM map:\n"); - print_memory_map(memory_setup()); + setup_memory_map(); copy_edd(); @@ -807,10 +764,7 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); - if (user_defined_memmap) { - printk(KERN_INFO "user-defined physical RAM map:\n"); - print_memory_map("user"); - } + finish_e820_parsing(); strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h index a9f7c6ec32bf..e1f10c60901f 100644 --- a/include/asm-x86/e820_32.h +++ b/include/asm-x86/e820_32.h @@ -18,6 +18,9 @@ #ifndef __ASSEMBLY__ +extern void setup_memory_map(void); +extern void finish_e820_parsing(void); + extern struct e820map e820; extern void update_e820(void); @@ -32,7 +35,6 @@ extern void update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type); extern void e820_register_memory(void); extern void limit_regions(unsigned long long size); -extern void print_memory_map(char *who); extern void init_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); -- cgit v1.2.3 From 95ffa2438d0e9c48779f0106b1c0eb36165e759c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 29 Apr 2008 03:52:33 -0700 Subject: x86: mtrr cleanup for converting continuous to discrete layout, v8 some BIOS like to use continus MTRR layout, and X driver can not add WB entries for graphical cards when 4g or more RAM installed. the patch will change MTRR to discrete. mtrr_chunk_size= could be used to have smaller continuous block to hold holes. default is 256m, could be set according to size of graphics card memory. mtrr_gran_size= could be used to send smallest mtrr block to avoid run out of MTRRs v2: fix -1 for UC checking v3: default to disable, and need use enable_mtrr_cleanup to enable this feature skip the var state change warning. remove next_basek in range_to_mtrr() v4: correct warning mask. v5: CONFIG_MTRR_SANITIZER v6: fix 1g, 2g, 512 aligment with extra hole v7: gran_sizek to prevent running out of MTRRs. v8: fix hole_basek caculation caused when removing next_basek gran_sizek using when basek is 0. need to apply [PATCH] x86: fix trimming e820 with MTRR holes. right after this one. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- Documentation/kernel-parameters.txt | 14 ++ arch/x86/Kconfig | 26 ++ arch/x86/kernel/cpu/mtrr/generic.c | 32 ++- arch/x86/kernel/cpu/mtrr/main.c | 467 +++++++++++++++++++++++++++++++++++- arch/x86/kernel/cpu/mtrr/mtrr.h | 3 + 5 files changed, 528 insertions(+), 14 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e07c432c731f..44427607b7c6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -599,6 +599,20 @@ and is between 256 and 4096 characters. It is defined in the file See drivers/char/README.epca and Documentation/digiepca.txt. + disable_mtrr_cleanup [X86] + enable_mtrr_cleanup [X86] + The kernel tries to adjust MTRR layout from continuous + to discrete, to make X server driver able to add WB + entry later. This parameter enables/disables that. + + mtrr_chunk_size=nn[KMG] [X86] + used for mtrr cleanup. It is largest continous chunk + that could hold holes aka. UC entries. + + mtrr_gran_size=nn[KMG] [X86] + used for mtrr cleanup. It is granity of mtrr block. + Big value could prevent small alignment use up MTRRs. + disable_mtrr_trim [X86, Intel and AMD only] By default the kernel will trim any uncacheable memory out of your available memory pool based on diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fe361ae7ef2f..97a1764a3d20 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1092,6 +1092,32 @@ config MTRR See for more information. +config MTRR_SANITIZER + def_bool y + prompt "MTRR cleanup support" + depends on MTRR + help + Convert MTRR layout from continuous to discrete, so some X driver + could add WB entries. + + Say N here if you see bootup problems (boot crash, boot hang, + spontaneous reboots). + + Could be disabled with disable_mtrr_cleanup. Also mtrr_chunk_size + could be used to send largest mtrr entry size for continuous block + to hold holes (aka. UC entries) + + If unsure, say Y. + +config MTRR_SANITIZER_ENABLE_DEFAULT + def_bool y + prompt "Enable MTRR cleanup by default" + depends on MTRR_SANITIZER + help + Enable mtrr cleanup by default + + If unsure, say Y. + config X86_PAT bool prompt "x86 PAT support" diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 0625d4158e58..5aae648600bf 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -37,7 +37,7 @@ static struct fixed_range_block fixed_range_blocks[] = { static unsigned long smp_changes_mask; static struct mtrr_state mtrr_state = {}; static int mtrr_state_set; -static u64 tom2; +u64 mtrr_tom2; #undef MODULE_PARAM_PREFIX #define MODULE_PARAM_PREFIX "mtrr." @@ -139,8 +139,8 @@ u8 mtrr_type_lookup(u64 start, u64 end) } } - if (tom2) { - if (start >= (1ULL<<32) && (end < tom2)) + if (mtrr_tom2) { + if (start >= (1ULL<<32) && (end < mtrr_tom2)) return MTRR_TYPE_WRBACK; } @@ -158,6 +158,20 @@ get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr) rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi); } +/* fill the MSR pair relating to a var range */ +void fill_mtrr_var_range(unsigned int index, + u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi) +{ + struct mtrr_var_range *vr; + + vr = mtrr_state.var_ranges; + + vr[index].base_lo = base_lo; + vr[index].base_hi = base_hi; + vr[index].mask_lo = mask_lo; + vr[index].mask_hi = mask_hi; +} + static void get_fixed_ranges(mtrr_type * frs) { @@ -216,10 +230,10 @@ void __init get_mtrr_state(void) unsigned low, high; /* TOP_MEM2 */ rdmsr(MSR_K8_TOP_MEM2, low, high); - tom2 = high; - tom2 <<= 32; - tom2 |= low; - tom2 &= 0xffffff8000000ULL; + mtrr_tom2 = high; + mtrr_tom2 <<= 32; + mtrr_tom2 |= low; + mtrr_tom2 &= 0xffffff8000000ULL; } if (mtrr_show) { int high_width; @@ -251,9 +265,9 @@ void __init get_mtrr_state(void) else printk(KERN_INFO "MTRR %u disabled\n", i); } - if (tom2) { + if (mtrr_tom2) { printk(KERN_INFO "TOM2: %016llx aka %lldM\n", - tom2, tom2>>20); + mtrr_tom2, mtrr_tom2>>20); } } mtrr_state_set = 1; diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 6a1e278d9323..8a6f68b45e3e 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include @@ -609,6 +610,452 @@ static struct sysdev_driver mtrr_sysdev_driver = { .resume = mtrr_restore, }; +#ifdef CONFIG_MTRR_SANITIZER + +#ifdef CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT +static int enable_mtrr_cleanup __initdata = 1; +#else +static int enable_mtrr_cleanup __initdata; +#endif + +#else + +static int enable_mtrr_cleanup __initdata = -1; + +#endif + +static int __init disable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 0; + return 0; +} +early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup); + +static int __init enable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 1; + return 0; +} +early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); + +#define RANGE_NUM 256 + +struct res_range { + unsigned long start; + unsigned long end; +}; + +static int __init add_range(struct res_range *range, int nr_range, unsigned long start, + unsigned long end, int merge) +{ + int i; + + if (!merge) + goto addit; + + /* try to merge it with old one */ + for (i = 0; i < nr_range; i++) { + unsigned long final_start, final_end; + unsigned long common_start, common_end; + + if (!range[i].end) + continue; + + common_start = max(range[i].start, start); + common_end = min(range[i].end, end); + if (common_start > common_end + 1) + continue; + + final_start = min(range[i].start, start); + final_end = max(range[i].end, end); + + range[i].start = final_start; + range[i].end = final_end; + return nr_range; + } + +addit: + /* need to add that */ + if (nr_range >= RANGE_NUM) + return nr_range; + + range[nr_range].start = start; + range[nr_range].end = end; + + nr_range++; + + return nr_range; + +} +static void __init subtract_range(struct res_range *range, unsigned long start, + unsigned long end) +{ + int i; + int j; + + for (j = 0; j < RANGE_NUM; j++) { + if (!range[j].end) + continue; + + if (start <= range[j].start && end >= range[j].end) { + range[j].start = 0; + range[j].end = 0; + continue; + } + + if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) { + range[j].start = end + 1; + continue; + } + + + if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) { + range[j].end = start - 1; + continue; + } + + if (start > range[j].start && end < range[j].end) { + /* find the new spare */ + for (i = 0; i < RANGE_NUM; i++) { + if (range[i].end == 0) + break; + } + if (i < RANGE_NUM) { + range[i].end = range[j].end; + range[i].start = end + 1; + } else { + printk(KERN_ERR "run of slot in ranges\n"); + } + range[j].end = start - 1; + continue; + } + } +} + +static int __init cmp_range(const void *x1, const void *x2) +{ + const struct res_range *r1 = x1; + const struct res_range *r2 = x2; + long start1, start2; + + start1 = r1->start; + start2 = r2->start; + + return start1 - start2; +} + +struct var_mtrr_state { + unsigned long range_startk, range_sizek; + unsigned long chunk_sizek; + unsigned long gran_sizek; + unsigned int reg; + unsigned address_bits; +}; + +static void __init set_var_mtrr( + unsigned int reg, unsigned long basek, unsigned long sizek, + unsigned char type, unsigned address_bits) +{ + u32 base_lo, base_hi, mask_lo, mask_hi; + unsigned address_mask_high; + + if (!sizek) { + fill_mtrr_var_range(reg, 0, 0, 0, 0); + return; + } + + address_mask_high = ((1u << (address_bits - 32u)) - 1u); + + base_hi = basek >> 22; + base_lo = basek << 10; + + if (sizek < 4*1024*1024) { + mask_hi = address_mask_high; + mask_lo = ~((sizek << 10) - 1); + } else { + mask_hi = address_mask_high & (~((sizek >> 22) - 1)); + mask_lo = 0; + } + + base_lo |= type; + mask_lo |= 0x800; + fill_mtrr_var_range(reg, base_lo, base_hi, mask_lo, mask_hi); +} + +static unsigned int __init range_to_mtrr(unsigned int reg, + unsigned long range_startk, unsigned long range_sizek, + unsigned char type, unsigned address_bits) +{ + if (!range_sizek || (reg >= num_var_ranges)) + return reg; + + while (range_sizek) { + unsigned long max_align, align; + unsigned long sizek; + /* Compute the maximum size I can make a range */ + if (range_startk) + max_align = ffs(range_startk) - 1; + else + max_align = 32; + align = fls(range_sizek) - 1; + if (align > max_align) + align = max_align; + + sizek = 1 << align; + printk(KERN_INFO "Setting variable MTRR %d, base: %ldMB, range: %ldMB, type %s\n", + reg, range_startk >> 10, sizek >> 10, + (type == MTRR_TYPE_UNCACHABLE)?"UC": + ((type == MTRR_TYPE_WRBACK)?"WB":"Other") + ); + set_var_mtrr(reg++, range_startk, sizek, type, address_bits); + range_startk += sizek; + range_sizek -= sizek; + if (reg >= num_var_ranges) + break; + } + return reg; +} + +static void __init range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) +{ + unsigned long hole_basek, hole_sizek; + unsigned long range0_basek, range0_sizek; + unsigned long range_basek, range_sizek; + unsigned long chunk_sizek; + unsigned long gran_sizek; + + hole_basek = 0; + hole_sizek = 0; + chunk_sizek = state->chunk_sizek; + gran_sizek = state->gran_sizek; + + /* align with gran size, prevent small block used up MTRRs */ + range_basek = ALIGN(state->range_startk, gran_sizek); + if ((range_basek > basek) && basek) + return; + range_sizek = ALIGN(state->range_sizek - (range_basek - state->range_startk), gran_sizek); + + while (range_basek + range_sizek > (state->range_startk + state->range_sizek)) { + range_sizek -= gran_sizek; + if (!range_sizek) + return; + } + state->range_startk = range_basek; + state->range_sizek = range_sizek; + + /* try to append some small hole */ + range0_basek = state->range_startk; + range0_sizek = ALIGN(state->range_sizek, chunk_sizek); + if ((range0_sizek == state->range_sizek) || + ((range0_basek + range0_sizek - chunk_sizek > basek) && basek)) { + printk(KERN_INFO "rangeX: %016lx - %016lx\n", range0_basek<<10, (range0_basek + state->range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + state->range_sizek, MTRR_TYPE_WRBACK, state->address_bits); + return; + } + + + range0_sizek -= chunk_sizek; + printk(KERN_INFO "range0: %016lx - %016lx\n", range0_basek<<10, (range0_basek + range0_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + range0_sizek, MTRR_TYPE_WRBACK, state->address_bits); + + range_basek = range0_basek + range0_sizek; + range_sizek = chunk_sizek; + if (range_sizek - (state->range_sizek - range0_sizek) < (chunk_sizek >> 1)) { + hole_sizek = range_sizek - (state->range_sizek - range0_sizek); + hole_basek = range_basek + range_sizek - hole_sizek; + } else + range_sizek = state->range_sizek - range0_sizek; + + printk(KERN_INFO "range: %016lx - %016lx\n", range_basek<<10, (range_basek + range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range_basek, + range_sizek, MTRR_TYPE_WRBACK, state->address_bits); + if (hole_sizek) { + printk(KERN_INFO "hole: %016lx - %016lx\n", hole_basek<<10, (hole_basek + hole_sizek)<<10); + state->reg = range_to_mtrr(state->reg, hole_basek, + hole_sizek, MTRR_TYPE_UNCACHABLE, state->address_bits); + } +} + +static void __init set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, unsigned long size_pfn) +{ + unsigned long basek, sizek; + + if (state->reg >= num_var_ranges) + return; + + basek = base_pfn << (PAGE_SHIFT - 10); + sizek = size_pfn << (PAGE_SHIFT - 10); + + /* See if I can merge with the last range */ + if ((basek <= 1024) || (state->range_startk + state->range_sizek == basek)) { + unsigned long endk = basek + sizek; + state->range_sizek = endk - state->range_startk; + return; + } + /* Write the range mtrrs */ + if (state->range_sizek != 0) { + range_to_mtrr_with_hole(state, basek); + + state->range_startk = 0; + state->range_sizek = 0; + } + /* Allocate an msr */ + state->range_startk = basek; + state->range_sizek = sizek; +} + +/* mininum size of mtrr block that can take hole */ +static u64 mtrr_chunk_size __initdata = (256ULL<<20); + +static int __init parse_mtrr_chunk_size_opt(char *p) +{ + if (!p) + return -EINVAL; + mtrr_chunk_size = memparse(p, &p); + return 0; +} +early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt); + +/* granity of mtrr of block */ +static u64 mtrr_gran_size __initdata = (64ULL<<20); + +static int __init parse_mtrr_gran_size_opt(char *p) +{ + if (!p) + return -EINVAL; + mtrr_gran_size = memparse(p, &p); + return 0; +} +early_param("mtrr_gran_size", parse_mtrr_gran_size_opt); + +static void __init x86_setup_var_mtrrs(struct res_range *range, int nr_range, unsigned address_bits) +{ + struct var_mtrr_state var_state; + int i; + + var_state.range_startk = 0; + var_state.range_sizek = 0; + var_state.reg = 0; + var_state.address_bits = address_bits; + var_state.chunk_sizek = mtrr_chunk_size >> 10; + var_state.gran_sizek = mtrr_gran_size >> 10; + + /* Write the range etc */ + for (i = 0; i < nr_range; i++) + set_var_mtrr_range(&var_state, range[i].start, range[i].end - range[i].start + 1); + + /* Write the last range */ + range_to_mtrr_with_hole(&var_state, 0); + printk(KERN_INFO "DONE variable MTRRs\n"); + /* Clear out the extra MTRR's */ + while (var_state.reg < num_var_ranges) + set_var_mtrr(var_state.reg++, 0, 0, 0, var_state.address_bits); +} + +static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, unsigned long extra_remove_base, unsigned long extra_remove_size) +{ + unsigned long i, base, size; + mtrr_type type; + + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + if (type != MTRR_TYPE_WRBACK) + continue; + nr_range = add_range(range, nr_range, base, base + size - 1, 1); + } + printk(KERN_INFO "After WB checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + + /* take out UC ranges */ + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + if (type != MTRR_TYPE_UNCACHABLE) + continue; + if (!size) + continue; + subtract_range(range, base, base + size - 1); + } + if (extra_remove_size) + subtract_range(range, extra_remove_base, extra_remove_base + extra_remove_size - 1); + + /* get new range num */ + nr_range = 0; + for (i = 0; i < RANGE_NUM; i++) { + if (!range[i].end) + continue; + nr_range++; + } + printk(KERN_INFO "After UC checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + + /* sort the ranges */ + sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); + printk(KERN_INFO "After sorting\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + + return nr_range; +} + +static int __init mtrr_cleanup(unsigned address_bits) +{ + unsigned long i, base, size, def, dummy; + mtrr_type type; + struct res_range range[RANGE_NUM]; + int nr_range; + unsigned long extra_remove_base, extra_remove_size; + + /* extra one for all 0 */ + int num[MTRR_NUM_TYPES + 1]; + + if (!is_cpu(INTEL) || enable_mtrr_cleanup < 1) + return 0; + rdmsr(MTRRdefType_MSR, def, dummy); + def &= 0xff; + if (def != MTRR_TYPE_UNCACHABLE) + return 0; + + /* check entries number */ + memset(num, 0, sizeof(num)); + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + if (type >= MTRR_NUM_TYPES) + continue; + if (!size) + type = MTRR_NUM_TYPES; + num[type]++; + } + + /* check if we got UC entries */ + if (!num[MTRR_TYPE_UNCACHABLE]) + return 0; + + /* check if we only had WB and UC */ + if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] != + num_var_ranges - num[MTRR_NUM_TYPES]) + return 0; + + memset(range, 0, sizeof(range)); + extra_remove_size = 0; + if (mtrr_tom2) { + extra_remove_base = 1 << (32 - PAGE_SHIFT); + extra_remove_size = (mtrr_tom2>>PAGE_SHIFT) - extra_remove_base; + } + nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base, extra_remove_size); + + /* convert ranges to var ranges state */ + x86_setup_var_mtrrs(range, nr_range, address_bits); + + return 1; + +} + static int disable_mtrr_trim; static int __init disable_mtrr_trim_setup(char *str) @@ -729,18 +1176,21 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) */ void __init mtrr_bp_init(void) { + u32 phys_addr; init_ifs(); + phys_addr = 32; + if (cpu_has_mtrr) { mtrr_if = &generic_mtrr_ops; size_or_mask = 0xff000000; /* 36 bits */ size_and_mask = 0x00f00000; + phys_addr = 36; /* This is an AMD specific MSR, but we assume(hope?) that Intel will implement it to when they extend the address bus of the Xeon. */ if (cpuid_eax(0x80000000) >= 0x80000008) { - u32 phys_addr; phys_addr = cpuid_eax(0x80000008) & 0xff; /* CPUID workaround for Intel 0F33/0F34 CPU */ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && @@ -758,6 +1208,7 @@ void __init mtrr_bp_init(void) don't support PAE */ size_or_mask = 0xfff00000; /* 32 bits */ size_and_mask = 0; + phys_addr = 32; } } else { switch (boot_cpu_data.x86_vendor) { @@ -791,8 +1242,13 @@ void __init mtrr_bp_init(void) if (mtrr_if) { set_num_var_ranges(); init_table(); - if (use_intel()) + if (use_intel()) { get_mtrr_state(); + + if (mtrr_cleanup(phys_addr)) + mtrr_if->set_all(); + + } } } @@ -829,9 +1285,10 @@ static int __init mtrr_init_finialize(void) { if (!mtrr_if) return 0; - if (use_intel()) - mtrr_state_warn(); - else { + if (use_intel()) { + if (enable_mtrr_cleanup < 1) + mtrr_state_warn(); + } else { /* The CPUs haven't MTRR and seem to not support SMP. They have * specific drivers, we use a tricky method to support * suspend/resume for them. diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h index 2cc77eb6fea3..2dc4ec656b23 100644 --- a/arch/x86/kernel/cpu/mtrr/mtrr.h +++ b/arch/x86/kernel/cpu/mtrr/mtrr.h @@ -81,6 +81,8 @@ void set_mtrr_done(struct set_mtrr_context *ctxt); void set_mtrr_cache_disable(struct set_mtrr_context *ctxt); void set_mtrr_prepare_save(struct set_mtrr_context *ctxt); +void fill_mtrr_var_range(unsigned int index, + u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi); void get_mtrr_state(void); extern void set_mtrr_ops(struct mtrr_ops * ops); @@ -92,6 +94,7 @@ extern struct mtrr_ops * mtrr_if; #define use_intel() (mtrr_if && mtrr_if->use_intel_if == 1) extern unsigned int num_var_ranges; +extern u64 mtrr_tom2; void mtrr_state_warn(void); const char *mtrr_attrib_to_str(int x); -- cgit v1.2.3 From 42651f15824d003e8357693ab72c4dbb3e280836 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 29 Apr 2008 01:59:49 -0700 Subject: x86: fix trimming e820 with MTRR holes. converting MTRR layout from continous to discrete, some time could run out of MTRRs. So add gran_sizek to prevent that by dumpping small RAM piece less than gran_sizek. previous trimming only can handle highest_pfn from mtrr to end_pfn from e820. when have more than 4g RAM installed, there will be holes below 4g. so need to check ram below 4g is coverred well. need to be applied after [PATCH] x86: mtrr cleanup for converting continuous to discrete layout v7 Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/mtrr/main.c | 101 +++++++++++++++++++++++++++++++++------- arch/x86/kernel/e820_32.c | 7 ++- arch/x86/kernel/e820_64.c | 6 ++- include/asm-x86/e820_32.h | 2 +- include/asm-x86/e820_64.h | 2 +- 5 files changed, 97 insertions(+), 21 deletions(-) diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 8a6f68b45e3e..9ab5c16b0d52 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -1095,6 +1095,17 @@ int __init amd_special_default_mtrr(void) return 0; } +static u64 __init real_trim_memory(unsigned long start_pfn, unsigned long limit_pfn) +{ + u64 trim_start, trim_size; + trim_start = start_pfn; + trim_start <<= PAGE_SHIFT; + trim_size = limit_pfn; + trim_size <<= PAGE_SHIFT; + trim_size -= trim_start; + return update_memory_range(trim_start, trim_size, E820_RAM, + E820_RESERVED); +} /** * mtrr_trim_uncached_memory - trim RAM not covered by MTRRs * @end_pfn: ending page frame number @@ -1110,8 +1121,13 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) { unsigned long i, base, size, highest_pfn = 0, def, dummy; mtrr_type type; - u64 trim_start, trim_size; + struct res_range range[RANGE_NUM]; + int nr_range; + u64 total_real_trim_size; + int changed; + /* extra one for all 0 */ + int num[MTRR_NUM_TYPES + 1]; /* * Make sure we only trim uncachable memory on machines that * support the Intel MTRR architecture: @@ -1123,9 +1139,6 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) if (def != MTRR_TYPE_UNCACHABLE) return 0; - if (amd_special_default_mtrr()) - return 0; - /* Find highest cached pfn */ for (i = 0; i < num_var_ranges; i++) { mtrr_if->get(i, &base, &size, &type); @@ -1145,26 +1158,80 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) return 0; } - if (highest_pfn < end_pfn) { + /* check entries number */ + memset(num, 0, sizeof(num)); + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + if (type >= MTRR_NUM_TYPES) + continue; + if (!size) + type = MTRR_NUM_TYPES; + num[type]++; + } + + /* no entry for WB? */ + if (!num[MTRR_TYPE_WRBACK]) + return 0; + + /* check if we only had WB and UC */ + if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] != + num_var_ranges - num[MTRR_NUM_TYPES]) + return 0; + + memset(range, 0, sizeof(range)); + nr_range = 0; + if (mtrr_tom2) { + range[nr_range].start = (1ULL<<(32 - PAGE_SHIFT)); + range[nr_range].end = (mtrr_tom2 >> PAGE_SHIFT) - 1; + if (highest_pfn < range[nr_range].end + 1) + highest_pfn = range[nr_range].end + 1; + nr_range++; + } + nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0); + + changed = 0; + total_real_trim_size = 0; + + /* check the top at first */ + i = nr_range - 1; + if (range[i].end + 1 < end_pfn) { + total_real_trim_size += real_trim_memory(range[i].end + 1, end_pfn); + } + + if (total_real_trim_size) { printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" - " all of memory, losing %luMB of RAM.\n", - (end_pfn - highest_pfn) >> (20 - PAGE_SHIFT)); + " all of memory, losing %lluMB of RAM.\n", + total_real_trim_size >> 20); WARN_ON(1); - printk(KERN_INFO "update e820 for mtrr\n"); - trim_start = highest_pfn; - trim_start <<= PAGE_SHIFT; - trim_size = end_pfn; - trim_size <<= PAGE_SHIFT; - trim_size -= trim_start; - update_memory_range(trim_start, trim_size, E820_RAM, - E820_RESERVED); + printk(KERN_INFO "update e820 for mtrr -- end_pfn\n"); update_e820(); - return 1; + changed = 1; } - return 0; + total_real_trim_size = 0; + if (range[0].start) + total_real_trim_size += real_trim_memory(0, range[0].start); + + for (i = 0; i < nr_range - 1; i--) { + if (range[i].end + 1 < range[i+1].start) + total_real_trim_size += real_trim_memory(range[i].end + 1, range[i+1].start); + } + + if (total_real_trim_size) { + printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" + " all of memory, losing %lluMB of RAM.\n", + total_real_trim_size >> 20); + + WARN_ON(1); + + printk(KERN_INFO "update e820 for mtrr -- holes\n"); + update_e820(); + changed = 1; + } + + return changed; } /** diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index 31ea2bb8c91a..857f706273a8 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -783,10 +783,11 @@ static int __init parse_memmap(char *arg) return 0; } early_param("memmap", parse_memmap); -void __init update_memory_range(u64 start, u64 size, unsigned old_type, +u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type) { int i; + u64 real_updated_size = 0; BUG_ON(old_type == new_type); @@ -798,6 +799,7 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, /* totally covered? */ if (ei->addr >= start && ei->size <= size) { ei->type = new_type; + real_updated_size += ei->size; continue; } /* partially covered */ @@ -807,7 +809,10 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, continue; add_memory_region(final_start, final_end - final_start, new_type); + real_updated_size += final_end - final_start; } + + return real_updated_size; } void __init finish_e820_parsing(void) diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 124480c0008d..848b2cd2d1dd 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -829,10 +829,11 @@ void __init finish_e820_parsing(void) } } -void __init update_memory_range(u64 start, u64 size, unsigned old_type, +u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type) { int i; + u64 real_updated_size = 0; BUG_ON(old_type == new_type); @@ -844,6 +845,7 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, /* totally covered? */ if (ei->addr >= start && ei->size <= size) { ei->type = new_type; + real_updated_size += ei->size; continue; } /* partially covered */ @@ -853,7 +855,9 @@ void __init update_memory_range(u64 start, u64 size, unsigned old_type, continue; add_memory_region(final_start, final_end - final_start, new_type); + real_updated_size += final_end - final_start; } + return real_updated_size; } void __init update_e820(void) diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h index e1f10c60901f..af0711b220df 100644 --- a/include/asm-x86/e820_32.h +++ b/include/asm-x86/e820_32.h @@ -31,7 +31,7 @@ extern void propagate_e820_map(void); extern void register_bootmem_low_pages(unsigned long max_low_pfn); extern void add_memory_region(unsigned long long start, unsigned long long size, int type); -extern void update_memory_range(u64 start, u64 size, unsigned old_type, +extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type); extern void e820_register_memory(void); extern void limit_regions(unsigned long long size); diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h index 71c4d685d30d..6ae3e2803286 100644 --- a/include/asm-x86/e820_64.h +++ b/include/asm-x86/e820_64.h @@ -21,7 +21,7 @@ extern unsigned long find_e820_area_size(unsigned long start, unsigned long align); extern void add_memory_region(unsigned long start, unsigned long size, int type); -extern void update_memory_range(u64 start, u64 size, unsigned old_type, +extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type); extern void setup_memory_region(void); extern void contig_e820_setup(void); -- cgit v1.2.3 From 8a374026c265476b1acfc3c186a66d59ebdb2cda Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 29 Apr 2008 20:25:16 -0700 Subject: x86: fix trimming e820 with MTRR holes. - fix v2: process hole then end_pfn fix update_memory_range with whole cover comparing Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/mtrr/main.c | 44 ++++++++++++++--------------------------- arch/x86/kernel/e820_32.c | 3 ++- arch/x86/kernel/e820_64.c | 3 ++- 3 files changed, 19 insertions(+), 31 deletions(-) diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 9ab5c16b0d52..5a2a4c146333 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -1098,11 +1098,12 @@ int __init amd_special_default_mtrr(void) static u64 __init real_trim_memory(unsigned long start_pfn, unsigned long limit_pfn) { u64 trim_start, trim_size; - trim_start = start_pfn; + trim_start = start_pfn; trim_start <<= PAGE_SHIFT; trim_size = limit_pfn; trim_size <<= PAGE_SHIFT; trim_size -= trim_start; + return update_memory_range(trim_start, trim_size, E820_RAM, E820_RESERVED); } @@ -1124,7 +1125,6 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) struct res_range range[RANGE_NUM]; int nr_range; u64 total_real_trim_size; - int changed; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1189,49 +1189,35 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) } nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0); - changed = 0; - total_real_trim_size = 0; - - /* check the top at first */ - i = nr_range - 1; - if (range[i].end + 1 < end_pfn) { - total_real_trim_size += real_trim_memory(range[i].end + 1, end_pfn); - } - - if (total_real_trim_size) { - printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" - " all of memory, losing %lluMB of RAM.\n", - total_real_trim_size >> 20); - - WARN_ON(1); - - printk(KERN_INFO "update e820 for mtrr -- end_pfn\n"); - update_e820(); - changed = 1; - } - total_real_trim_size = 0; + /* check the head */ if (range[0].start) total_real_trim_size += real_trim_memory(0, range[0].start); - - for (i = 0; i < nr_range - 1; i--) { + /* check the holes */ + for (i = 0; i < nr_range - 1; i++) { if (range[i].end + 1 < range[i+1].start) total_real_trim_size += real_trim_memory(range[i].end + 1, range[i+1].start); } + /* check the top */ + i = nr_range - 1; + if (range[i].end + 1 < end_pfn) + total_real_trim_size += real_trim_memory(range[i].end + 1, end_pfn); if (total_real_trim_size) { printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" " all of memory, losing %lluMB of RAM.\n", total_real_trim_size >> 20); - WARN_ON(1); + if (enable_mtrr_cleanup < 1) + WARN_ON(1); - printk(KERN_INFO "update e820 for mtrr -- holes\n"); + printk(KERN_INFO "update e820 for mtrr\n"); update_e820(); - changed = 1; + + return 1; } - return changed; + return 0; } /** diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index 857f706273a8..751d517d802c 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -797,7 +797,8 @@ u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, if (ei->type != old_type) continue; /* totally covered? */ - if (ei->addr >= start && ei->size <= size) { + if (ei->addr >= start && + (ei->addr + ei->size) <= (start + size)) { ei->type = new_type; real_updated_size += ei->size; continue; diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 848b2cd2d1dd..c45b4dea4055 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -843,7 +843,8 @@ u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, if (ei->type != old_type) continue; /* totally covered? */ - if (ei->addr >= start && ei->size <= size) { + if (ei->addr >= start && + (ei->addr + ei->size) <= (start + size)) { ei->type = new_type; real_updated_size += ei->size; continue; -- cgit v1.2.3 From f5098d62c1d1cede8ff23d01bbf50a421f110562 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 29 Apr 2008 20:25:58 -0700 Subject: x86: mtrr cleanup for converting continuous to discrete layout v8 - fix v9: address format change requests by Ingo more case handling in range_to_var_with_hole Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 9 +-- arch/x86/kernel/cpu/mtrr/main.c | 164 ++++++++++++++++++++++------------------ 2 files changed, 94 insertions(+), 79 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 97a1764a3d20..f417fe33d852 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1110,13 +1110,12 @@ config MTRR_SANITIZER If unsure, say Y. config MTRR_SANITIZER_ENABLE_DEFAULT - def_bool y - prompt "Enable MTRR cleanup by default" + int "MTRR cleanup enable value (0-1)" + range 0 1 + default "0" depends on MTRR_SANITIZER help - Enable mtrr cleanup by default - - If unsure, say Y. + Enable mtrr cleanup default value config X86_PAT bool diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 5a2a4c146333..79597d3c3431 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -611,17 +611,9 @@ static struct sysdev_driver mtrr_sysdev_driver = { }; #ifdef CONFIG_MTRR_SANITIZER - -#ifdef CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT -static int enable_mtrr_cleanup __initdata = 1; -#else -static int enable_mtrr_cleanup __initdata; -#endif - +static int enable_mtrr_cleanup __initdata = CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT; #else - static int enable_mtrr_cleanup __initdata = -1; - #endif static int __init disable_mtrr_cleanup_setup(char *str) @@ -640,6 +632,7 @@ static int __init enable_mtrr_cleanup_setup(char *str) } early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); +/* should be related to MTRR_VAR_RANGES nums */ #define RANGE_NUM 256 struct res_range { @@ -647,13 +640,27 @@ struct res_range { unsigned long end; }; -static int __init add_range(struct res_range *range, int nr_range, unsigned long start, - unsigned long end, int merge) +static int __init +add_range(struct res_range *range, int nr_range, unsigned long start, + unsigned long end) { - int i; + /* out of slots */ + if (nr_range >= RANGE_NUM) + return nr_range; - if (!merge) - goto addit; + range[nr_range].start = start; + range[nr_range].end = end; + + nr_range++; + + return nr_range; +} + +static int __init +add_range_with_merge(struct res_range *range, int nr_range, unsigned long start, + unsigned long end) +{ + int i; /* try to merge it with old one */ for (i = 0; i < nr_range; i++) { @@ -676,24 +683,14 @@ static int __init add_range(struct res_range *range, int nr_range, unsigned long return nr_range; } -addit: /* need to add that */ - if (nr_range >= RANGE_NUM) - return nr_range; - - range[nr_range].start = start; - range[nr_range].end = end; - - nr_range++; - - return nr_range; - + return add_range(range, nr_range, start, end); } -static void __init subtract_range(struct res_range *range, unsigned long start, - unsigned long end) + +static void __init +subtract_range(struct res_range *range, unsigned long start, unsigned long end) { - int i; - int j; + int i, j; for (j = 0; j < RANGE_NUM; j++) { if (!range[j].end) @@ -747,46 +744,47 @@ static int __init cmp_range(const void *x1, const void *x2) } struct var_mtrr_state { - unsigned long range_startk, range_sizek; - unsigned long chunk_sizek; - unsigned long gran_sizek; - unsigned int reg; - unsigned address_bits; + unsigned long range_startk; + unsigned long range_sizek; + unsigned long chunk_sizek; + unsigned long gran_sizek; + unsigned int reg; + unsigned int address_bits; }; -static void __init set_var_mtrr( - unsigned int reg, unsigned long basek, unsigned long sizek, - unsigned char type, unsigned address_bits) +static void __init +set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, + unsigned char type, unsigned address_bits) { u32 base_lo, base_hi, mask_lo, mask_hi; - unsigned address_mask_high; + u64 base, mask; if (!sizek) { fill_mtrr_var_range(reg, 0, 0, 0, 0); return; } - address_mask_high = ((1u << (address_bits - 32u)) - 1u); + mask = (1ULL << address_bits) - 1; + mask &= ~((((u64)sizek) << 10) - 1); - base_hi = basek >> 22; - base_lo = basek << 10; + base = ((u64)basek) << 10; - if (sizek < 4*1024*1024) { - mask_hi = address_mask_high; - mask_lo = ~((sizek << 10) - 1); - } else { - mask_hi = address_mask_high & (~((sizek >> 22) - 1)); - mask_lo = 0; - } + base |= type; + mask |= 0x800; + + base_lo = base & ((1ULL<<32) - 1); + base_hi = base >> 32; + + mask_lo = mask & ((1ULL<<32) - 1); + mask_hi = mask >> 32; - base_lo |= type; - mask_lo |= 0x800; fill_mtrr_var_range(reg, base_lo, base_hi, mask_lo, mask_hi); } -static unsigned int __init range_to_mtrr(unsigned int reg, - unsigned long range_startk, unsigned long range_sizek, - unsigned char type, unsigned address_bits) +static unsigned int __init +range_to_mtrr(unsigned int reg, unsigned long range_startk, + unsigned long range_sizek, unsigned char type, + unsigned address_bits) { if (!range_sizek || (reg >= num_var_ranges)) return reg; @@ -794,6 +792,7 @@ static unsigned int __init range_to_mtrr(unsigned int reg, while (range_sizek) { unsigned long max_align, align; unsigned long sizek; + /* Compute the maximum size I can make a range */ if (range_startk) max_align = ffs(range_startk) - 1; @@ -818,7 +817,8 @@ static unsigned int __init range_to_mtrr(unsigned int reg, return reg; } -static void __init range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) +static void __init +range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) { unsigned long hole_basek, hole_sizek; unsigned long range0_basek, range0_sizek; @@ -848,23 +848,31 @@ static void __init range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigne /* try to append some small hole */ range0_basek = state->range_startk; range0_sizek = ALIGN(state->range_sizek, chunk_sizek); - if ((range0_sizek == state->range_sizek) || - ((range0_basek + range0_sizek - chunk_sizek > basek) && basek)) { + if (range0_sizek == state->range_sizek) { printk(KERN_INFO "rangeX: %016lx - %016lx\n", range0_basek<<10, (range0_basek + state->range_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, state->range_sizek, MTRR_TYPE_WRBACK, state->address_bits); return; + } else if (basek) { + while (range0_basek + range0_sizek - chunk_sizek > basek) { + range0_sizek -= chunk_sizek; + if (!range0_sizek) + break; + } } - range0_sizek -= chunk_sizek; + if (range0_sizek > chunk_sizek) + range0_sizek -= chunk_sizek; printk(KERN_INFO "range0: %016lx - %016lx\n", range0_basek<<10, (range0_basek + range0_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, range0_sizek, MTRR_TYPE_WRBACK, state->address_bits); range_basek = range0_basek + range0_sizek; range_sizek = chunk_sizek; - if (range_sizek - (state->range_sizek - range0_sizek) < (chunk_sizek >> 1)) { + + if ((range_sizek - (state->range_sizek - range0_sizek) < (chunk_sizek >> 1)) && + (range_basek + range_sizek <= basek)) { hole_sizek = range_sizek - (state->range_sizek - range0_sizek); hole_basek = range_basek + range_sizek - hole_sizek; } else @@ -880,7 +888,9 @@ static void __init range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigne } } -static void __init set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, unsigned long size_pfn) +static void __init +set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, + unsigned long size_pfn) { unsigned long basek, sizek; @@ -921,7 +931,7 @@ static int __init parse_mtrr_chunk_size_opt(char *p) early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt); /* granity of mtrr of block */ -static u64 mtrr_gran_size __initdata = (64ULL<<20); +static u64 mtrr_gran_size __initdata = (1ULL<<20); static int __init parse_mtrr_gran_size_opt(char *p) { @@ -932,17 +942,19 @@ static int __init parse_mtrr_gran_size_opt(char *p) } early_param("mtrr_gran_size", parse_mtrr_gran_size_opt); -static void __init x86_setup_var_mtrrs(struct res_range *range, int nr_range, unsigned address_bits) +static void __init +x86_setup_var_mtrrs(struct res_range *range, int nr_range, + unsigned address_bits) { struct var_mtrr_state var_state; int i; - var_state.range_startk = 0; - var_state.range_sizek = 0; - var_state.reg = 0; - var_state.address_bits = address_bits; - var_state.chunk_sizek = mtrr_chunk_size >> 10; - var_state.gran_sizek = mtrr_gran_size >> 10; + var_state.range_startk = 0; + var_state.range_sizek = 0; + var_state.reg = 0; + var_state.address_bits = address_bits; + var_state.chunk_sizek = mtrr_chunk_size >> 10; + var_state.gran_sizek = mtrr_gran_size >> 10; /* Write the range etc */ for (i = 0; i < nr_range; i++) @@ -952,11 +964,16 @@ static void __init x86_setup_var_mtrrs(struct res_range *range, int nr_range, un range_to_mtrr_with_hole(&var_state, 0); printk(KERN_INFO "DONE variable MTRRs\n"); /* Clear out the extra MTRR's */ - while (var_state.reg < num_var_ranges) - set_var_mtrr(var_state.reg++, 0, 0, 0, var_state.address_bits); + while (var_state.reg < num_var_ranges) { + set_var_mtrr(var_state.reg, 0, 0, 0, var_state.address_bits); + var_state.reg++; + } } -static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, unsigned long extra_remove_base, unsigned long extra_remove_size) +static int __init +x86_get_mtrr_mem_range(struct res_range *range, int nr_range, + unsigned long extra_remove_base, + unsigned long extra_remove_size) { unsigned long i, base, size; mtrr_type type; @@ -965,7 +982,7 @@ static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, mtrr_if->get(i, &base, &size, &type); if (type != MTRR_TYPE_WRBACK) continue; - nr_range = add_range(range, nr_range, base, base + size - 1, 1); + nr_range = add_range_with_merge(range, nr_range, base, base + size - 1); } printk(KERN_INFO "After WB checking\n"); for (i = 0; i < nr_range; i++) @@ -1005,11 +1022,11 @@ static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, static int __init mtrr_cleanup(unsigned address_bits) { + unsigned long extra_remove_base, extra_remove_size; unsigned long i, base, size, def, dummy; - mtrr_type type; struct res_range range[RANGE_NUM]; + mtrr_type type; int nr_range; - unsigned long extra_remove_base, extra_remove_size; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1053,7 +1070,6 @@ static int __init mtrr_cleanup(unsigned address_bits) x86_setup_var_mtrrs(range, nr_range, address_bits); return 1; - } static int disable_mtrr_trim; -- cgit v1.2.3 From 12031a624af7816ec7660b82be648aa3703b4ebe Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 2 May 2008 02:40:22 -0700 Subject: x86: mtrr cleanup for converting continuous to discrete - auto detect v4 Loop through mtrr chunk_size and gran_size from 1M to 2G to find out the optimal value so user does not need to add mtrr_chunk_size and mtrr_gran_size to the kernel command line. If optimal value is not found, print out all list to help select less optimal value. Add mtrr_spare_reg_nr= so user could set 2 instead of 1, if the card need more entries. v2: find the one with more spare entries v3: fix hole_basek offset v4: tight the compare between range and range_new loop stop with 4g Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Gabriel C Cc: Mika Fischer Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 13 +- arch/x86/Kconfig | 9 + arch/x86/kernel/cpu/mtrr/main.c | 610 +++++++++++++++++++++++++++--------- 3 files changed, 484 insertions(+), 148 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 44427607b7c6..2000977af776 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -610,8 +610,17 @@ and is between 256 and 4096 characters. It is defined in the file that could hold holes aka. UC entries. mtrr_gran_size=nn[KMG] [X86] - used for mtrr cleanup. It is granity of mtrr block. - Big value could prevent small alignment use up MTRRs. + Used for mtrr cleanup. It is granularity of mtrr block. + Default is 1. + Large value could prevent small alignment from + using up MTRRs. + + mtrr_spare_reg_nr=n [X86] + Format: + Range: 0,7 : spare reg number + Default : 1 + Used for mtrr cleanup. It is spare mtrr entries number. + Set to 2 or more if your graphical card needs more. disable_mtrr_trim [X86, Intel and AMD only] By default the kernel will trim any uncacheable diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index f417fe33d852..9e9761504422 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1117,6 +1117,15 @@ config MTRR_SANITIZER_ENABLE_DEFAULT help Enable mtrr cleanup default value +config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT + int "MTRR cleanup spare reg num (0-7)" + range 0 7 + default "1" + depends on MTRR_SANITIZER + help + mtrr cleanup spare entries default, it can be changed via + mtrr_spare_reg_nr= + config X86_PAT bool prompt "x86 PAT support" diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 79597d3c3431..e6c162c379ac 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -610,28 +610,6 @@ static struct sysdev_driver mtrr_sysdev_driver = { .resume = mtrr_restore, }; -#ifdef CONFIG_MTRR_SANITIZER -static int enable_mtrr_cleanup __initdata = CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT; -#else -static int enable_mtrr_cleanup __initdata = -1; -#endif - -static int __init disable_mtrr_cleanup_setup(char *str) -{ - if (enable_mtrr_cleanup != -1) - enable_mtrr_cleanup = 0; - return 0; -} -early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup); - -static int __init enable_mtrr_cleanup_setup(char *str) -{ - if (enable_mtrr_cleanup != -1) - enable_mtrr_cleanup = 1; - return 0; -} -early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); - /* should be related to MTRR_VAR_RANGES nums */ #define RANGE_NUM 256 @@ -702,13 +680,15 @@ subtract_range(struct res_range *range, unsigned long start, unsigned long end) continue; } - if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) { + if (start <= range[j].start && end < range[j].end && + range[j].start < end + 1) { range[j].start = end + 1; continue; } - if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) { + if (start > range[j].start && end >= range[j].end && + range[j].end > start - 1) { range[j].end = start - 1; continue; } @@ -743,18 +723,123 @@ static int __init cmp_range(const void *x1, const void *x2) return start1 - start2; } +struct var_mtrr_range_state { + unsigned long base_pfn; + unsigned long size_pfn; + mtrr_type type; +}; + +struct var_mtrr_range_state __initdata range_state[RANGE_NUM]; + +static int __init +x86_get_mtrr_mem_range(struct res_range *range, int nr_range, + unsigned long extra_remove_base, + unsigned long extra_remove_size) +{ + unsigned long i, base, size; + mtrr_type type; + + for (i = 0; i < num_var_ranges; i++) { + type = range_state[i].type; + if (type != MTRR_TYPE_WRBACK) + continue; + base = range_state[i].base_pfn; + size = range_state[i].size_pfn; + nr_range = add_range_with_merge(range, nr_range, base, + base + size - 1); + } + printk(KERN_DEBUG "After WB checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + + /* take out UC ranges */ + for (i = 0; i < num_var_ranges; i++) { + type = range_state[i].type; + if (type != MTRR_TYPE_UNCACHABLE) + continue; + size = range_state[i].size_pfn; + if (!size) + continue; + base = range_state[i].base_pfn; + subtract_range(range, base, base + size - 1); + } + if (extra_remove_size) + subtract_range(range, extra_remove_base, + extra_remove_base + extra_remove_size - 1); + + /* get new range num */ + nr_range = 0; + for (i = 0; i < RANGE_NUM; i++) { + if (!range[i].end) + continue; + nr_range++; + } + printk(KERN_DEBUG "After UC checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + + /* sort the ranges */ + sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); + printk(KERN_DEBUG "After sorting\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + + /* clear those is not used */ + for (i = nr_range; i < RANGE_NUM; i++) + memset(&range[i], 0, sizeof(range[i])); + + return nr_range; +} + +static struct res_range __initdata range[RANGE_NUM]; + +#ifdef CONFIG_MTRR_SANITIZER + +static unsigned long __init sum_ranges(struct res_range *range, int nr_range) +{ + unsigned long sum; + int i; + + sum = 0; + for (i = 0; i < nr_range; i++) + sum += range[i].end + 1 - range[i].start; + + return sum; +} + +static int enable_mtrr_cleanup __initdata = + CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT; + +static int __init disable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 0; + return 0; +} +early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup); + +static int __init enable_mtrr_cleanup_setup(char *str) +{ + if (enable_mtrr_cleanup != -1) + enable_mtrr_cleanup = 1; + return 0; +} +early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); + struct var_mtrr_state { unsigned long range_startk; unsigned long range_sizek; unsigned long chunk_sizek; unsigned long gran_sizek; unsigned int reg; - unsigned int address_bits; }; static void __init set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, - unsigned char type, unsigned address_bits) + unsigned char type, unsigned int address_bits) { u32 base_lo, base_hi, mask_lo, mask_hi; u64 base, mask; @@ -781,10 +866,34 @@ set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, fill_mtrr_var_range(reg, base_lo, base_hi, mask_lo, mask_hi); } +static void __init +save_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek, + unsigned char type) +{ + range_state[reg].base_pfn = basek >> (PAGE_SHIFT - 10); + range_state[reg].size_pfn = sizek >> (PAGE_SHIFT - 10); + range_state[reg].type = type; +} + +static void __init +set_var_mtrr_all(unsigned int address_bits) +{ + unsigned long basek, sizek; + unsigned char type; + unsigned int reg; + + for (reg = 0; reg < num_var_ranges; reg++) { + basek = range_state[reg].base_pfn << (PAGE_SHIFT - 10); + sizek = range_state[reg].size_pfn << (PAGE_SHIFT - 10); + type = range_state[reg].type; + + set_var_mtrr(reg, basek, sizek, type, address_bits); + } +} + static unsigned int __init range_to_mtrr(unsigned int reg, unsigned long range_startk, - unsigned long range_sizek, unsigned char type, - unsigned address_bits) + unsigned long range_sizek, unsigned char type) { if (!range_sizek || (reg >= num_var_ranges)) return reg; @@ -803,12 +912,13 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk, align = max_align; sizek = 1 << align; - printk(KERN_INFO "Setting variable MTRR %d, base: %ldMB, range: %ldMB, type %s\n", + printk(KERN_DEBUG "Setting variable MTRR %d, base: %ldMB, " + "range: %ldMB, type %s\n", reg, range_startk >> 10, sizek >> 10, (type == MTRR_TYPE_UNCACHABLE)?"UC": ((type == MTRR_TYPE_WRBACK)?"WB":"Other") ); - set_var_mtrr(reg++, range_startk, sizek, type, address_bits); + save_var_mtrr(reg++, range_startk, sizek, type); range_startk += sizek; range_sizek -= sizek; if (reg >= num_var_ranges) @@ -817,10 +927,12 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk, return reg; } -static void __init -range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) +static unsigned __init +range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, + unsigned long sizek) { unsigned long hole_basek, hole_sizek; + unsigned long second_basek, second_sizek; unsigned long range0_basek, range0_sizek; unsigned long range_basek, range_sizek; unsigned long chunk_sizek; @@ -828,64 +940,95 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek) hole_basek = 0; hole_sizek = 0; + second_basek = 0; + second_sizek = 0; chunk_sizek = state->chunk_sizek; gran_sizek = state->gran_sizek; /* align with gran size, prevent small block used up MTRRs */ range_basek = ALIGN(state->range_startk, gran_sizek); if ((range_basek > basek) && basek) - return; - range_sizek = ALIGN(state->range_sizek - (range_basek - state->range_startk), gran_sizek); + return second_sizek; + state->range_sizek -= (range_basek - state->range_startk); + range_sizek = ALIGN(state->range_sizek, gran_sizek); - while (range_basek + range_sizek > (state->range_startk + state->range_sizek)) { + while (range_sizek > state->range_sizek) { range_sizek -= gran_sizek; if (!range_sizek) - return; + return 0; } - state->range_startk = range_basek; state->range_sizek = range_sizek; /* try to append some small hole */ range0_basek = state->range_startk; range0_sizek = ALIGN(state->range_sizek, chunk_sizek); if (range0_sizek == state->range_sizek) { - printk(KERN_INFO "rangeX: %016lx - %016lx\n", range0_basek<<10, (range0_basek + state->range_sizek)<<10); - state->reg = range_to_mtrr(state->reg, range0_basek, - state->range_sizek, MTRR_TYPE_WRBACK, state->address_bits); - return; - } else if (basek) { - while (range0_basek + range0_sizek - chunk_sizek > basek) { + printk(KERN_DEBUG "rangeX: %016lx - %016lx\n", range0_basek<<10, + (range0_basek + state->range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + state->range_sizek, MTRR_TYPE_WRBACK); + return 0; + } + + range0_sizek -= chunk_sizek; + if (range0_sizek && sizek) { + while (range0_basek + range0_sizek > (basek + sizek)) { range0_sizek -= chunk_sizek; if (!range0_sizek) break; } } + if (range0_sizek) { + printk(KERN_DEBUG "range0: %016lx - %016lx\n", range0_basek<<10, + (range0_basek + range0_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range0_basek, + range0_sizek, MTRR_TYPE_WRBACK); - if (range0_sizek > chunk_sizek) - range0_sizek -= chunk_sizek; - printk(KERN_INFO "range0: %016lx - %016lx\n", range0_basek<<10, (range0_basek + range0_sizek)<<10); - state->reg = range_to_mtrr(state->reg, range0_basek, - range0_sizek, MTRR_TYPE_WRBACK, state->address_bits); + } range_basek = range0_basek + range0_sizek; range_sizek = chunk_sizek; - if ((range_sizek - (state->range_sizek - range0_sizek) < (chunk_sizek >> 1)) && - (range_basek + range_sizek <= basek)) { - hole_sizek = range_sizek - (state->range_sizek - range0_sizek); - hole_basek = range_basek + range_sizek - hole_sizek; - } else + if (range_basek + range_sizek > basek && + range_basek + range_sizek <= (basek + sizek)) { + /* one hole */ + second_basek = basek; + second_sizek = range_basek + range_sizek - basek; + } + + /* if last piece, only could one hole near end */ + if ((second_basek || !basek) && + range_sizek - (state->range_sizek - range0_sizek) - second_sizek < + (chunk_sizek >> 1)) { + /* + * one hole in middle (second_sizek is 0) or at end + * (second_sizek is 0 ) + */ + hole_sizek = range_sizek - (state->range_sizek - range0_sizek) + - second_sizek; + hole_basek = range_basek + range_sizek - hole_sizek + - second_sizek; + } else { + /* fallback for big hole, or several holes */ range_sizek = state->range_sizek - range0_sizek; + second_basek = 0; + second_sizek = 0; + } - printk(KERN_INFO "range: %016lx - %016lx\n", range_basek<<10, (range_basek + range_sizek)<<10); - state->reg = range_to_mtrr(state->reg, range_basek, - range_sizek, MTRR_TYPE_WRBACK, state->address_bits); + printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10, + (range_basek + range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range_basek, range_sizek, + MTRR_TYPE_WRBACK); if (hole_sizek) { - printk(KERN_INFO "hole: %016lx - %016lx\n", hole_basek<<10, (hole_basek + hole_sizek)<<10); - state->reg = range_to_mtrr(state->reg, hole_basek, - hole_sizek, MTRR_TYPE_UNCACHABLE, state->address_bits); + printk(KERN_DEBUG "hole: %016lx - %016lx\n", hole_basek<<10, + (hole_basek + hole_sizek)<<10); + state->reg = range_to_mtrr(state->reg, hole_basek, hole_sizek, + MTRR_TYPE_UNCACHABLE); + } + + return second_sizek; } static void __init @@ -893,6 +1036,7 @@ set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, unsigned long size_pfn) { unsigned long basek, sizek; + unsigned long second_sizek = 0; if (state->reg >= num_var_ranges) return; @@ -901,21 +1045,19 @@ set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn, sizek = size_pfn << (PAGE_SHIFT - 10); /* See if I can merge with the last range */ - if ((basek <= 1024) || (state->range_startk + state->range_sizek == basek)) { + if ((basek <= 1024) || + (state->range_startk + state->range_sizek == basek)) { unsigned long endk = basek + sizek; state->range_sizek = endk - state->range_startk; return; } /* Write the range mtrrs */ - if (state->range_sizek != 0) { - range_to_mtrr_with_hole(state, basek); + if (state->range_sizek != 0) + second_sizek = range_to_mtrr_with_hole(state, basek, sizek); - state->range_startk = 0; - state->range_sizek = 0; - } /* Allocate an msr */ - state->range_startk = basek; - state->range_sizek = sizek; + state->range_startk = basek + second_sizek; + state->range_sizek = sizek - second_sizek; } /* mininum size of mtrr block that can take hole */ @@ -931,7 +1073,7 @@ static int __init parse_mtrr_chunk_size_opt(char *p) early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt); /* granity of mtrr of block */ -static u64 mtrr_gran_size __initdata = (1ULL<<20); +static u64 mtrr_gran_size __initdata; static int __init parse_mtrr_gran_size_opt(char *p) { @@ -942,91 +1084,84 @@ static int __init parse_mtrr_gran_size_opt(char *p) } early_param("mtrr_gran_size", parse_mtrr_gran_size_opt); -static void __init +static int nr_mtrr_spare_reg __initdata = + CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT; + +static int __init parse_mtrr_spare_reg(char *arg) +{ + if (arg) + nr_mtrr_spare_reg = simple_strtoul(arg, NULL, 0); + return 0; +} + +early_param("mtrr_spare_reg_nr", parse_mtrr_spare_reg); + +static int __init x86_setup_var_mtrrs(struct res_range *range, int nr_range, - unsigned address_bits) + u64 chunk_size, u64 gran_size) { struct var_mtrr_state var_state; int i; + int num_reg; var_state.range_startk = 0; var_state.range_sizek = 0; var_state.reg = 0; - var_state.address_bits = address_bits; - var_state.chunk_sizek = mtrr_chunk_size >> 10; - var_state.gran_sizek = mtrr_gran_size >> 10; + var_state.chunk_sizek = chunk_size >> 10; + var_state.gran_sizek = gran_size >> 10; + + memset(range_state, 0, sizeof(range_state)); /* Write the range etc */ for (i = 0; i < nr_range; i++) - set_var_mtrr_range(&var_state, range[i].start, range[i].end - range[i].start + 1); + set_var_mtrr_range(&var_state, range[i].start, + range[i].end - range[i].start + 1); /* Write the last range */ - range_to_mtrr_with_hole(&var_state, 0); - printk(KERN_INFO "DONE variable MTRRs\n"); + if (var_state.range_sizek != 0) + range_to_mtrr_with_hole(&var_state, 0, 0); + printk(KERN_DEBUG "DONE variable MTRRs\n"); + + num_reg = var_state.reg; /* Clear out the extra MTRR's */ while (var_state.reg < num_var_ranges) { - set_var_mtrr(var_state.reg, 0, 0, 0, var_state.address_bits); + save_var_mtrr(var_state.reg, 0, 0, 0); var_state.reg++; } -} - -static int __init -x86_get_mtrr_mem_range(struct res_range *range, int nr_range, - unsigned long extra_remove_base, - unsigned long extra_remove_size) -{ - unsigned long i, base, size; - mtrr_type type; - - for (i = 0; i < num_var_ranges; i++) { - mtrr_if->get(i, &base, &size, &type); - if (type != MTRR_TYPE_WRBACK) - continue; - nr_range = add_range_with_merge(range, nr_range, base, base + size - 1); - } - printk(KERN_INFO "After WB checking\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); - /* take out UC ranges */ - for (i = 0; i < num_var_ranges; i++) { - mtrr_if->get(i, &base, &size, &type); - if (type != MTRR_TYPE_UNCACHABLE) - continue; - if (!size) - continue; - subtract_range(range, base, base + size - 1); - } - if (extra_remove_size) - subtract_range(range, extra_remove_base, extra_remove_base + extra_remove_size - 1); + return num_reg; +} - /* get new range num */ - nr_range = 0; - for (i = 0; i < RANGE_NUM; i++) { - if (!range[i].end) - continue; - nr_range++; - } - printk(KERN_INFO "After UC checking\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); +struct mtrr_cleanup_result { + unsigned long gran_sizek; + unsigned long chunk_sizek; + unsigned long lose_cover_sizek; + unsigned int num_reg; + int bad; +}; - /* sort the ranges */ - sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); - printk(KERN_INFO "After sorting\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_INFO "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); +/* + * gran_size: 1M, 2M, ..., 2G + * chunk size: gran_size, ..., 4G + * so we need (2+13)*6 + */ +#define NUM_RESULT 90 +#define PSHIFT (PAGE_SHIFT - 10) - return nr_range; -} +static struct mtrr_cleanup_result __initdata result[NUM_RESULT]; +static struct res_range __initdata range_new[RANGE_NUM]; +static unsigned long __initdata min_loss_pfn[RANGE_NUM]; static int __init mtrr_cleanup(unsigned address_bits) { unsigned long extra_remove_base, extra_remove_size; unsigned long i, base, size, def, dummy; - struct res_range range[RANGE_NUM]; mtrr_type type; - int nr_range; + int nr_range, nr_range_new; + u64 chunk_size, gran_size; + unsigned long range_sums, range_sums_new; + int index_good; + int num_reg_good; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1038,10 +1173,20 @@ static int __init mtrr_cleanup(unsigned address_bits) if (def != MTRR_TYPE_UNCACHABLE) return 0; + /* get it and store it aside */ + memset(range_state, 0, sizeof(range_state)); + for (i = 0; i < num_var_ranges; i++) { + mtrr_if->get(i, &base, &size, &type); + range_state[i].base_pfn = base; + range_state[i].size_pfn = size; + range_state[i].type = type; + } + /* check entries number */ memset(num, 0, sizeof(num)); for (i = 0; i < num_var_ranges; i++) { - mtrr_if->get(i, &base, &size, &type); + type = range_state[i].type; + size = range_state[i].size_pfn; if (type >= MTRR_NUM_TYPES) continue; if (!size) @@ -1062,15 +1207,172 @@ static int __init mtrr_cleanup(unsigned address_bits) extra_remove_size = 0; if (mtrr_tom2) { extra_remove_base = 1 << (32 - PAGE_SHIFT); - extra_remove_size = (mtrr_tom2>>PAGE_SHIFT) - extra_remove_base; + extra_remove_size = + (mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base; + } + nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base, + extra_remove_size); + range_sums = sum_ranges(range, nr_range); + printk(KERN_INFO "total RAM coverred: %ldM\n", + range_sums >> (20 - PAGE_SHIFT)); + + if (mtrr_chunk_size && mtrr_gran_size) { + int num_reg; + + /* convert ranges to var ranges state */ + num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size, + mtrr_gran_size); + + /* we got new setting in range_state, check it */ + memset(range_new, 0, sizeof(range_new)); + nr_range_new = x86_get_mtrr_mem_range(range_new, 0, + extra_remove_base, + extra_remove_size); + range_sums_new = sum_ranges(range_new, nr_range_new); + + i = 0; + result[i].chunk_sizek = mtrr_chunk_size >> 10; + result[i].gran_sizek = mtrr_gran_size >> 10; + result[i].num_reg = num_reg; + if (range_sums < range_sums_new) { + result[i].lose_cover_sizek = + (range_sums_new - range_sums) << PSHIFT; + result[i].bad = 1; + } else + result[i].lose_cover_sizek = + (range_sums - range_sums_new) << PSHIFT; + + printk(KERN_INFO " %sgran_size: %ldM \tchunk_size: %ldM \t", + result[i].bad?" BAD ":"", result[i].gran_sizek >> 10, + result[i].chunk_sizek >> 10); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", + result[i].num_reg, result[i].bad?"-":"", + result[i].lose_cover_sizek >> 10); + if (!result[i].bad) { + set_var_mtrr_all(address_bits); + return 1; + } + printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, " + "will find optimal one\n"); + memset(result, 0, sizeof(result[0])); + } + + i = 0; + memset(min_loss_pfn, 0xff, sizeof(min_loss_pfn)); + memset(result, 0, sizeof(result)); + for (gran_size = (1ULL<<20); gran_size < (1ULL<<32); gran_size <<= 1) { + for (chunk_size = gran_size; chunk_size < (1ULL<<33); + chunk_size <<= 1) { + int num_reg; + + printk(KERN_INFO + "\ngran_size: %lldM chunk_size_size: %lldM\n", + gran_size >> 20, chunk_size >> 20); + if (i >= NUM_RESULT) + continue; + + /* convert ranges to var ranges state */ + num_reg = x86_setup_var_mtrrs(range, nr_range, + chunk_size, gran_size); + + /* we got new setting in range_state, check it */ + memset(range_new, 0, sizeof(range_new)); + nr_range_new = x86_get_mtrr_mem_range(range_new, 0, + extra_remove_base, extra_remove_size); + range_sums_new = sum_ranges(range_new, nr_range_new); + + result[i].chunk_sizek = chunk_size >> 10; + result[i].gran_sizek = gran_size >> 10; + result[i].num_reg = num_reg; + if (range_sums < range_sums_new) { + result[i].lose_cover_sizek = + (range_sums_new - range_sums) << PSHIFT; + result[i].bad = 1; + } else + result[i].lose_cover_sizek = + (range_sums - range_sums_new) << PSHIFT; + + /* double check it */ + if (!result[i].bad && !result[i].lose_cover_sizek) { + if (nr_range_new != nr_range || + memcmp(range, range_new, sizeof(range))) + result[i].bad = 1; + } + + if (!result[i].bad && (range_sums - range_sums_new < + min_loss_pfn[num_reg])) { + min_loss_pfn[num_reg] = + range_sums - range_sums_new; + } + i++; + } } - nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base, extra_remove_size); - /* convert ranges to var ranges state */ - x86_setup_var_mtrrs(range, nr_range, address_bits); + /* print out all */ + for (i = 0; i < NUM_RESULT; i++) { + printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", + result[i].bad?"*BAD* ":" ", result[i].gran_sizek >> 10, + result[i].chunk_sizek >> 10); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", + result[i].num_reg, result[i].bad?"-":"", + result[i].lose_cover_sizek >> 10); + } - return 1; + /* try to find the optimal index */ + if (nr_mtrr_spare_reg >= num_var_ranges) + nr_mtrr_spare_reg = num_var_ranges - 1; + num_reg_good = -1; + for (i = 1; i < num_var_ranges + 1 - nr_mtrr_spare_reg; i++) { + if (!min_loss_pfn[i]) { + num_reg_good = i; + break; + } + } + + index_good = -1; + if (num_reg_good != -1) { + for (i = 0; i < NUM_RESULT; i++) { + if (!result[i].bad && + result[i].num_reg == num_reg_good && + !result[i].lose_cover_sizek) { + index_good = i; + break; + } + } + } + + if (index_good != -1) { + printk(KERN_INFO "Found optimal setting for mtrr clean up\n"); + i = index_good; + printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t", + result[i].gran_sizek >> 10, + result[i].chunk_sizek >> 10); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %ldM \n", + result[i].num_reg, + result[i].lose_cover_sizek >> 10); + /* convert ranges to var ranges state */ + chunk_size = result[i].chunk_sizek; + chunk_size <<= 10; + gran_size = result[i].gran_sizek; + gran_size <<= 10; + x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size); + set_var_mtrr_all(address_bits); + return 1; + } + + printk(KERN_INFO "mtrr_cleanup: can not find optimal value\n"); + printk(KERN_INFO "please specify mtrr_gran_size/mtrr_chunk_size\n"); + + return 0; } +#else +static int __init mtrr_cleanup(unsigned address_bits) +{ + return 0; +} +#endif + +static int __initdata changed_by_mtrr_cleanup; static int disable_mtrr_trim; @@ -1111,7 +1413,8 @@ int __init amd_special_default_mtrr(void) return 0; } -static u64 __init real_trim_memory(unsigned long start_pfn, unsigned long limit_pfn) +static u64 __init real_trim_memory(unsigned long start_pfn, + unsigned long limit_pfn) { u64 trim_start, trim_size; trim_start = start_pfn; @@ -1138,9 +1441,8 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) { unsigned long i, base, size, highest_pfn = 0, def, dummy; mtrr_type type; - struct res_range range[RANGE_NUM]; int nr_range; - u64 total_real_trim_size; + u64 total_trim_size; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1155,11 +1457,22 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) if (def != MTRR_TYPE_UNCACHABLE) return 0; - /* Find highest cached pfn */ + /* get it and store it aside */ + memset(range_state, 0, sizeof(range_state)); for (i = 0; i < num_var_ranges; i++) { mtrr_if->get(i, &base, &size, &type); + range_state[i].base_pfn = base; + range_state[i].size_pfn = size; + range_state[i].type = type; + } + + /* Find highest cached pfn */ + for (i = 0; i < num_var_ranges; i++) { + type = range_state[i].type; if (type != MTRR_TYPE_WRBACK) continue; + base = range_state[i].base_pfn; + size = range_state[i].size_pfn; if (highest_pfn < base + size) highest_pfn = base + size; } @@ -1177,9 +1490,10 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) /* check entries number */ memset(num, 0, sizeof(num)); for (i = 0; i < num_var_ranges; i++) { - mtrr_if->get(i, &base, &size, &type); + type = range_state[i].type; if (type >= MTRR_NUM_TYPES) continue; + size = range_state[i].size_pfn; if (!size) type = MTRR_NUM_TYPES; num[type]++; @@ -1205,26 +1519,28 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn) } nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0); - total_real_trim_size = 0; + total_trim_size = 0; /* check the head */ if (range[0].start) - total_real_trim_size += real_trim_memory(0, range[0].start); + total_trim_size += real_trim_memory(0, range[0].start); /* check the holes */ for (i = 0; i < nr_range - 1; i++) { if (range[i].end + 1 < range[i+1].start) - total_real_trim_size += real_trim_memory(range[i].end + 1, range[i+1].start); + total_trim_size += real_trim_memory(range[i].end + 1, + range[i+1].start); } /* check the top */ i = nr_range - 1; if (range[i].end + 1 < end_pfn) - total_real_trim_size += real_trim_memory(range[i].end + 1, end_pfn); + total_trim_size += real_trim_memory(range[i].end + 1, + end_pfn); - if (total_real_trim_size) { + if (total_trim_size) { printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover" " all of memory, losing %lluMB of RAM.\n", - total_real_trim_size >> 20); + total_trim_size >> 20); - if (enable_mtrr_cleanup < 1) + if (!changed_by_mtrr_cleanup) WARN_ON(1); printk(KERN_INFO "update e820 for mtrr\n"); @@ -1314,8 +1630,10 @@ void __init mtrr_bp_init(void) if (use_intel()) { get_mtrr_state(); - if (mtrr_cleanup(phys_addr)) + if (mtrr_cleanup(phys_addr)) { + changed_by_mtrr_cleanup = 1; mtrr_if->set_all(); + } } } @@ -1355,7 +1673,7 @@ static int __init mtrr_init_finialize(void) if (!mtrr_if) return 0; if (use_intel()) { - if (enable_mtrr_cleanup < 1) + if (!changed_by_mtrr_cleanup) mtrr_state_warn(); } else { /* The CPUs haven't MTRR and seem to not support SMP. They have -- cgit v1.2.3 From 833e78bfeeef628f0201349a0a05a54f48f07884 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 5 May 2008 15:57:38 -0700 Subject: x86: process fam 10h like k8 with fixed mtrr setting otherwise fixed MTRR for family 10h may not be changed. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/mtrr/generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 5aae648600bf..a83f5cd78885 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -342,7 +342,7 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords) if (lo != msrwords[0] || hi != msrwords[1]) { if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD && - boot_cpu_data.x86 == 15 && + (boot_cpu_data.x86 >= 0x0f && boot_cpu_data.x86 <= 0x11) && ((msrwords[0] | msrwords[1]) & K8_MTRR_RDMEM_WRMEM_MASK)) k8_enable_fixed_iorrs(); mtrr_wrmsr(msr, msrwords[0], msrwords[1]); -- cgit v1.2.3 From b79cd8f1268bab57ff85b19d131f7f23deab2dee Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 11 May 2008 00:30:15 -0700 Subject: x86: make e820.c to have common functions remove the duplicated copy of these functions. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/e820.c | 475 +++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_32.c | 411 +-------------------------------------- arch/x86/kernel/e820_64.c | 444 ------------------------------------------ arch/x86/kernel/setup_32.c | 2 +- include/asm-x86/e820.h | 14 ++ include/asm-x86/e820_32.h | 12 -- include/asm-x86/e820_64.h | 12 -- 8 files changed, 496 insertions(+), 876 deletions(-) create mode 100644 arch/x86/kernel/e820.c diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..5369a4e36f17 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -22,7 +22,7 @@ obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o -obj-y += bootflag.o e820_$(BITS).o +obj-y += bootflag.o e820_$(BITS).o e820.o obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o obj-$(CONFIG_X86_64) += bugs_64.o diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c new file mode 100644 index 000000000000..2cb686f60d0d --- /dev/null +++ b/arch/x86/kernel/e820.c @@ -0,0 +1,475 @@ +/* + * Handle the memory map. + * The functions here do the job until bootmem takes over. + * + * Getting sanitize_e820_map() in sync with i386 version by applying change: + * - Provisions for empty E820 memory regions (reported by certain BIOSes). + * Alex Achenbach , December 2002. + * Venkatesh Pallipadi + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +struct e820map e820; + +/* For PCI or other memory-mapped resources */ +unsigned long pci_mem_start = 0xaeedbabe; +#ifdef CONFIG_PCI +EXPORT_SYMBOL(pci_mem_start); +#endif + +/* + * This function checks if any part of the range is mapped + * with type. + */ +int +e820_any_mapped(u64 start, u64 end, unsigned type) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (type && ei->type != type) + continue; + if (ei->addr >= end || ei->addr + ei->size <= start) + continue; + return 1; + } + return 0; +} +EXPORT_SYMBOL_GPL(e820_any_mapped); + +/* + * This function checks if the entire range is mapped with type. + * + * Note: this function only works correct if the e820 table is sorted and + * not-overlapping, which is the case + */ +int __init e820_all_mapped(u64 start, u64 end, unsigned type) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (type && ei->type != type) + continue; + /* is the region (part) in overlap with the current region ?*/ + if (ei->addr >= end || ei->addr + ei->size <= start) + continue; + + /* if the region is at the beginning of we move + * start to the end of the region since it's ok until there + */ + if (ei->addr <= start) + start = ei->addr + ei->size; + /* + * if start is now at or beyond end, we're done, full + * coverage + */ + if (start >= end) + return 1; + } + return 0; +} + +/* + * Add a memory region to the kernel e820 map. + */ +void __init add_memory_region(u64 start, u64 size, int type) +{ + int x = e820.nr_map; + + if (x == E820MAX) { + printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); + return; + } + + e820.map[x].addr = start; + e820.map[x].size = size; + e820.map[x].type = type; + e820.nr_map++; +} + +void __init e820_print_map(char *who) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + printk(KERN_INFO " %s: %016Lx - %016Lx ", who, + (unsigned long long) e820.map[i].addr, + (unsigned long long) + (e820.map[i].addr + e820.map[i].size)); + switch (e820.map[i].type) { + case E820_RAM: + printk(KERN_CONT "(usable)\n"); + break; + case E820_RESERVED: + printk(KERN_CONT "(reserved)\n"); + break; + case E820_ACPI: + printk(KERN_CONT "(ACPI data)\n"); + break; + case E820_NVS: + printk(KERN_CONT "(ACPI NVS)\n"); + break; + default: + printk(KERN_CONT "type %u\n", e820.map[i].type); + break; + } + } +} + +/* + * Sanitize the BIOS e820 map. + * + * Some e820 responses include overlapping entries. The following + * replaces the original e820 map with a new one, removing overlaps. + * + */ +int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map) +{ + struct change_member { + struct e820entry *pbios; /* pointer to original bios entry */ + unsigned long long addr; /* address for this change point */ + }; + static struct change_member change_point_list[2*E820MAX] __initdata; + static struct change_member *change_point[2*E820MAX] __initdata; + static struct e820entry *overlap_list[E820MAX] __initdata; + static struct e820entry new_bios[E820MAX] __initdata; + struct change_member *change_tmp; + unsigned long current_type, last_type; + unsigned long long last_addr; + int chgidx, still_changing; + int overlap_entries; + int new_bios_entry; + int old_nr, new_nr, chg_nr; + int i; + + /* + Visually we're performing the following + (1,2,3,4 = memory types)... + + Sample memory map (w/overlaps): + ____22__________________ + ______________________4_ + ____1111________________ + _44_____________________ + 11111111________________ + ____________________33__ + ___________44___________ + __________33333_________ + ______________22________ + ___________________2222_ + _________111111111______ + _____________________11_ + _________________4______ + + Sanitized equivalent (no overlap): + 1_______________________ + _44_____________________ + ___1____________________ + ____22__________________ + ______11________________ + _________1______________ + __________3_____________ + ___________44___________ + _____________33_________ + _______________2________ + ________________1_______ + _________________4______ + ___________________2____ + ____________________33__ + ______________________4_ + */ + + /* if there's only one memory region, don't bother */ + if (*pnr_map < 2) + return -1; + + old_nr = *pnr_map; + + /* bail out if we find any unreasonable addresses in bios map */ + for (i = 0; i < old_nr; i++) + if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) + return -1; + + /* create pointers for initial change-point information (for sorting) */ + for (i = 0; i < 2 * old_nr; i++) + change_point[i] = &change_point_list[i]; + + /* record all known change-points (starting and ending addresses), + omitting those that are for empty memory regions */ + chgidx = 0; + for (i = 0; i < old_nr; i++) { + if (biosmap[i].size != 0) { + change_point[chgidx]->addr = biosmap[i].addr; + change_point[chgidx++]->pbios = &biosmap[i]; + change_point[chgidx]->addr = biosmap[i].addr + + biosmap[i].size; + change_point[chgidx++]->pbios = &biosmap[i]; + } + } + chg_nr = chgidx; + + /* sort change-point list by memory addresses (low -> high) */ + still_changing = 1; + while (still_changing) { + still_changing = 0; + for (i = 1; i < chg_nr; i++) { + unsigned long long curaddr, lastaddr; + unsigned long long curpbaddr, lastpbaddr; + + curaddr = change_point[i]->addr; + lastaddr = change_point[i - 1]->addr; + curpbaddr = change_point[i]->pbios->addr; + lastpbaddr = change_point[i - 1]->pbios->addr; + + /* + * swap entries, when: + * + * curaddr > lastaddr or + * curaddr == lastaddr and curaddr == curpbaddr and + * lastaddr != lastpbaddr + */ + if (curaddr < lastaddr || + (curaddr == lastaddr && curaddr == curpbaddr && + lastaddr != lastpbaddr)) { + change_tmp = change_point[i]; + change_point[i] = change_point[i-1]; + change_point[i-1] = change_tmp; + still_changing = 1; + } + } + } + + /* create a new bios memory map, removing overlaps */ + overlap_entries = 0; /* number of entries in the overlap table */ + new_bios_entry = 0; /* index for creating new bios map entries */ + last_type = 0; /* start with undefined memory type */ + last_addr = 0; /* start with 0 as last starting address */ + + /* loop through change-points, determining affect on the new bios map */ + for (chgidx = 0; chgidx < chg_nr; chgidx++) { + /* keep track of all overlapping bios entries */ + if (change_point[chgidx]->addr == + change_point[chgidx]->pbios->addr) { + /* + * add map entry to overlap list (> 1 entry + * implies an overlap) + */ + overlap_list[overlap_entries++] = + change_point[chgidx]->pbios; + } else { + /* + * remove entry from list (order independent, + * so swap with last) + */ + for (i = 0; i < overlap_entries; i++) { + if (overlap_list[i] == + change_point[chgidx]->pbios) + overlap_list[i] = + overlap_list[overlap_entries-1]; + } + overlap_entries--; + } + /* + * if there are overlapping entries, decide which + * "type" to use (larger value takes precedence -- + * 1=usable, 2,3,4,4+=unusable) + */ + current_type = 0; + for (i = 0; i < overlap_entries; i++) + if (overlap_list[i]->type > current_type) + current_type = overlap_list[i]->type; + /* + * continue building up new bios map based on this + * information + */ + if (current_type != last_type) { + if (last_type != 0) { + new_bios[new_bios_entry].size = + change_point[chgidx]->addr - last_addr; + /* + * move forward only if the new size + * was non-zero + */ + if (new_bios[new_bios_entry].size != 0) + /* + * no more space left for new + * bios entries ? + */ + if (++new_bios_entry >= E820MAX) + break; + } + if (current_type != 0) { + new_bios[new_bios_entry].addr = + change_point[chgidx]->addr; + new_bios[new_bios_entry].type = current_type; + last_addr = change_point[chgidx]->addr; + } + last_type = current_type; + } + } + /* retain count for new bios entries */ + new_nr = new_bios_entry; + + /* copy new bios mapping into original location */ + memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry)); + *pnr_map = new_nr; + + return 0; +} + +/* + * Copy the BIOS e820 map into a safe place. + * + * Sanity-check it while we're at it.. + * + * If we're lucky and live on a modern system, the setup code + * will have given us a memory map that we can use to properly + * set up memory. If we aren't, we'll fake a memory map. + */ +int __init copy_e820_map(struct e820entry *biosmap, int nr_map) +{ + /* Only one memory region (or negative)? Ignore it */ + if (nr_map < 2) + return -1; + + do { + u64 start = biosmap->addr; + u64 size = biosmap->size; + u64 end = start + size; + u32 type = biosmap->type; + + /* Overflow in 64 bits? Ignore the memory map. */ + if (start > end) + return -1; + + add_memory_region(start, size, type); + } while (biosmap++, --nr_map); + return 0; +} + +u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, + unsigned new_type) +{ + int i; + u64 real_updated_size = 0; + + BUG_ON(old_type == new_type); + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + u64 final_start, final_end; + if (ei->type != old_type) + continue; + /* totally covered? */ + if (ei->addr >= start && + (ei->addr + ei->size) <= (start + size)) { + ei->type = new_type; + real_updated_size += ei->size; + continue; + } + /* partially covered */ + final_start = max(start, ei->addr); + final_end = min(start + size, ei->addr + ei->size); + if (final_start >= final_end) + continue; + add_memory_region(final_start, final_end - final_start, + new_type); + real_updated_size += final_end - final_start; + } + return real_updated_size; +} + +void __init update_e820(void) +{ + u8 nr_map; + + nr_map = e820.nr_map; + if (sanitize_e820_map(e820.map, &nr_map)) + return; + e820.nr_map = nr_map; + printk(KERN_INFO "modified physical RAM map:\n"); + e820_print_map("modified"); +} + +/* + * Search for the biggest gap in the low 32 bits of the e820 + * memory space. We pass this space to PCI to assign MMIO resources + * for hotplug or unconfigured devices in. + * Hopefully the BIOS let enough space left. + */ +__init void e820_setup_gap(void) +{ + unsigned long gapstart, gapsize, round; + unsigned long long last; + int i; + int found = 0; + + last = 0x100000000ull; + gapstart = 0x10000000; + gapsize = 0x400000; + i = e820.nr_map; + while (--i >= 0) { + unsigned long long start = e820.map[i].addr; + unsigned long long end = start + e820.map[i].size; + + /* + * Since "last" is at most 4GB, we know we'll + * fit in 32 bits if this condition is true + */ + if (last > end) { + unsigned long gap = last - end; + + if (gap > gapsize) { + gapsize = gap; + gapstart = end; + found = 1; + } + } + if (start < last) + last = start; + } + +#ifdef CONFIG_X86_64 + if (!found) { + gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024; + printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit " + "address range\n" + KERN_ERR "PCI: Unassigned devices with 32bit resource " + "registers may break!\n"); + } +#endif + + /* + * See how much we want to round up: start off with + * rounding to the next 1MB area. + */ + round = 0x100000; + while ((gapsize >> 4) > round) + round += round; + /* Fun with two's complement */ + pci_mem_start = (gapstart + round) & -round; + + printk(KERN_INFO + "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n", + pci_mem_start, gapstart, gapsize); +} + diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index 751d517d802c..dfe25751038b 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -16,21 +16,6 @@ #include #include -struct e820map e820; -struct change_member { - struct e820entry *pbios; /* pointer to original bios entry */ - unsigned long long addr; /* address for this change point */ -}; -static struct change_member change_point_list[2*E820MAX] __initdata; -static struct change_member *change_point[2*E820MAX] __initdata; -static struct e820entry *overlap_list[E820MAX] __initdata; -static struct e820entry new_bios[E820MAX] __initdata; -/* For PCI or other memory-mapped resources */ -unsigned long pci_mem_start = 0x10000000; -#ifdef CONFIG_PCI -EXPORT_SYMBOL(pci_mem_start); -#endif - static struct resource system_rom_resource = { .name = "System ROM", .start = 0xf0000, @@ -254,223 +239,6 @@ void __init e820_mark_nosave_regions(void) } #endif -void __init add_memory_region(unsigned long long start, - unsigned long long size, int type) -{ - int x; - - x = e820.nr_map; - - if (x == E820MAX) { - printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); - return; - } - - e820.map[x].addr = start; - e820.map[x].size = size; - e820.map[x].type = type; - e820.nr_map++; -} /* add_memory_region */ - -/* - * Sanitize the BIOS e820 map. - * - * Some e820 responses include overlapping entries. The following - * replaces the original e820 map with a new one, removing overlaps. - * - */ -int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map) -{ - struct change_member *change_tmp; - unsigned long current_type, last_type; - unsigned long long last_addr; - int chgidx, still_changing; - int overlap_entries; - int new_bios_entry; - int old_nr, new_nr, chg_nr; - int i; - - /* - Visually we're performing the following (1,2,3,4 = memory types)... - - Sample memory map (w/overlaps): - ____22__________________ - ______________________4_ - ____1111________________ - _44_____________________ - 11111111________________ - ____________________33__ - ___________44___________ - __________33333_________ - ______________22________ - ___________________2222_ - _________111111111______ - _____________________11_ - _________________4______ - - Sanitized equivalent (no overlap): - 1_______________________ - _44_____________________ - ___1____________________ - ____22__________________ - ______11________________ - _________1______________ - __________3_____________ - ___________44___________ - _____________33_________ - _______________2________ - ________________1_______ - _________________4______ - ___________________2____ - ____________________33__ - ______________________4_ - */ - /* if there's only one memory region, don't bother */ - if (*pnr_map < 2) { - return -1; - } - - old_nr = *pnr_map; - - /* bail out if we find any unreasonable addresses in bios map */ - for (i=0; iaddr = biosmap[i].addr; - change_point[chgidx++]->pbios = &biosmap[i]; - change_point[chgidx]->addr = biosmap[i].addr + biosmap[i].size; - change_point[chgidx++]->pbios = &biosmap[i]; - } - } - chg_nr = chgidx; /* true number of change-points */ - - /* sort change-point list by memory addresses (low -> high) */ - still_changing = 1; - while (still_changing) { - still_changing = 0; - for (i=1; i < chg_nr; i++) { - /* if > , swap */ - /* or, if current= & last=, swap */ - if ((change_point[i]->addr < change_point[i-1]->addr) || - ((change_point[i]->addr == change_point[i-1]->addr) && - (change_point[i]->addr == change_point[i]->pbios->addr) && - (change_point[i-1]->addr != change_point[i-1]->pbios->addr)) - ) - { - change_tmp = change_point[i]; - change_point[i] = change_point[i-1]; - change_point[i-1] = change_tmp; - still_changing=1; - } - } - } - - /* create a new bios memory map, removing overlaps */ - overlap_entries=0; /* number of entries in the overlap table */ - new_bios_entry=0; /* index for creating new bios map entries */ - last_type = 0; /* start with undefined memory type */ - last_addr = 0; /* start with 0 as last starting address */ - /* loop through change-points, determining affect on the new bios map */ - for (chgidx=0; chgidx < chg_nr; chgidx++) - { - /* keep track of all overlapping bios entries */ - if (change_point[chgidx]->addr == change_point[chgidx]->pbios->addr) - { - /* add map entry to overlap list (> 1 entry implies an overlap) */ - overlap_list[overlap_entries++]=change_point[chgidx]->pbios; - } - else - { - /* remove entry from list (order independent, so swap with last) */ - for (i=0; ipbios) - overlap_list[i] = overlap_list[overlap_entries-1]; - } - overlap_entries--; - } - /* if there are overlapping entries, decide which "type" to use */ - /* (larger value takes precedence -- 1=usable, 2,3,4,4+=unusable) */ - current_type = 0; - for (i=0; itype > current_type) - current_type = overlap_list[i]->type; - /* continue building up new bios map based on this information */ - if (current_type != last_type) { - if (last_type != 0) { - new_bios[new_bios_entry].size = - change_point[chgidx]->addr - last_addr; - /* move forward only if the new size was non-zero */ - if (new_bios[new_bios_entry].size != 0) - if (++new_bios_entry >= E820MAX) - break; /* no more space left for new bios entries */ - } - if (current_type != 0) { - new_bios[new_bios_entry].addr = change_point[chgidx]->addr; - new_bios[new_bios_entry].type = current_type; - last_addr=change_point[chgidx]->addr; - } - last_type = current_type; - } - } - new_nr = new_bios_entry; /* retain count for new bios entries */ - - /* copy new bios mapping into original location */ - memcpy(biosmap, new_bios, new_nr*sizeof(struct e820entry)); - *pnr_map = new_nr; - - return 0; -} - -/* - * Copy the BIOS e820 map into a safe place. - * - * Sanity-check it while we're at it.. - * - * If we're lucky and live on a modern system, the setup code - * will have given us a memory map that we can use to properly - * set up memory. If we aren't, we'll fake a memory map. - * - * We check to see that the memory map contains at least 2 elements - * before we'll use it, because the detection code in setup.S may - * not be perfect and most every PC known to man has two memory - * regions: one from 0 to 640k, and one from 1mb up. (The IBM - * thinkpad 560x, for example, does not cooperate with the memory - * detection code.) - */ -int __init copy_e820_map(struct e820entry *biosmap, int nr_map) -{ - /* Only one memory region (or negative)? Ignore it */ - if (nr_map < 2) - return -1; - - do { - u64 start = biosmap->addr; - u64 size = biosmap->size; - u64 end = start + size; - u32 type = biosmap->type; - - /* Overflow in 64 bits? Ignore the memory map. */ - if (start > end) - return -1; - - add_memory_region(start, size, type); - } while (biosmap++, --nr_map); - - return 0; -} - /* * Find the highest page frame number we have available */ @@ -535,86 +303,12 @@ void __init register_bootmem_low_pages(unsigned long max_low_pfn) } } -void __init e820_register_memory(void) -{ - unsigned long gapstart, gapsize, round; - unsigned long long last; - int i; - - /* - * Search for the biggest gap in the low 32 bits of the e820 - * memory space. - */ - last = 0x100000000ull; - gapstart = 0x10000000; - gapsize = 0x400000; - i = e820.nr_map; - while (--i >= 0) { - unsigned long long start = e820.map[i].addr; - unsigned long long end = start + e820.map[i].size; - - /* - * Since "last" is at most 4GB, we know we'll - * fit in 32 bits if this condition is true - */ - if (last > end) { - unsigned long gap = last - end; - - if (gap > gapsize) { - gapsize = gap; - gapstart = end; - } - } - if (start < last) - last = start; - } - - /* - * See how much we want to round up: start off with - * rounding to the next 1MB area. - */ - round = 0x100000; - while ((gapsize >> 4) > round) - round += round; - /* Fun with two's complement */ - pci_mem_start = (gapstart + round) & -round; - - printk("Allocating PCI resources starting at %08lx (gap: %08lx:%08lx)\n", - pci_mem_start, gapstart, gapsize); -} - -static void __init print_memory_map(char *who) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - printk(" %s: %016Lx - %016Lx ", who, - e820.map[i].addr, - e820.map[i].addr + e820.map[i].size); - switch (e820.map[i].type) { - case E820_RAM: printk("(usable)\n"); - break; - case E820_RESERVED: - printk("(reserved)\n"); - break; - case E820_ACPI: - printk("(ACPI data)\n"); - break; - case E820_NVS: - printk("(ACPI NVS)\n"); - break; - default: printk("type %u\n", e820.map[i].type); - break; - } - } -} - void __init limit_regions(unsigned long long size) { unsigned long long current_addr; int i; - print_memory_map("limit_regions start"); + e820_print_map("limit_regions start"); for (i = 0; i < e820.nr_map; i++) { current_addr = e820.map[i].addr + e820.map[i].size; if (current_addr < size) @@ -633,62 +327,10 @@ void __init limit_regions(unsigned long long size) e820.nr_map = i + 1; e820.map[i].size -= current_addr - size; } - print_memory_map("limit_regions endfor"); + e820_print_map("limit_regions endfor"); return; } - print_memory_map("limit_regions endfunc"); -} - -/* - * This function checks if any part of the range is mapped - * with type. - */ -int -e820_any_mapped(u64 start, u64 end, unsigned type) -{ - int i; - for (i = 0; i < e820.nr_map; i++) { - const struct e820entry *ei = &e820.map[i]; - if (type && ei->type != type) - continue; - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - return 1; - } - return 0; -} -EXPORT_SYMBOL_GPL(e820_any_mapped); - - /* - * This function checks if the entire range is mapped with type. - * - * Note: this function only works correct if the e820 table is sorted and - * not-overlapping, which is the case - */ -int __init -e820_all_mapped(unsigned long s, unsigned long e, unsigned type) -{ - u64 start = s; - u64 end = e; - int i; - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - if (type && ei->type != type) - continue; - /* is the region (part) in overlap with the current region ?*/ - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - /* if the region is at the beginning of we move - * start to the end of the region since it's ok until there - */ - if (ei->addr <= start) - start = ei->addr + ei->size; - /* if start is now at or beyond end, we're done, full - * coverage */ - if (start >= end) - return 1; /* we're done */ - } - return 0; + e820_print_map("limit_regions endfunc"); } /* Overridden in paravirt.c if CONFIG_PARAVIRT */ @@ -700,7 +342,7 @@ char * __init __attribute__((weak)) memory_setup(void) void __init setup_memory_map(void) { printk(KERN_INFO "BIOS-provided physical RAM map:\n"); - print_memory_map(memory_setup()); + e820_print_map(memory_setup()); } static int __initdata user_defined_memmap; @@ -783,55 +425,12 @@ static int __init parse_memmap(char *arg) return 0; } early_param("memmap", parse_memmap); -u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, - unsigned new_type) -{ - int i; - u64 real_updated_size = 0; - - BUG_ON(old_type == new_type); - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - u64 final_start, final_end; - if (ei->type != old_type) - continue; - /* totally covered? */ - if (ei->addr >= start && - (ei->addr + ei->size) <= (start + size)) { - ei->type = new_type; - real_updated_size += ei->size; - continue; - } - /* partially covered */ - final_start = max(start, ei->addr); - final_end = min(start + size, ei->addr + ei->size); - if (final_start >= final_end) - continue; - add_memory_region(final_start, final_end - final_start, - new_type); - real_updated_size += final_end - final_start; - } - - return real_updated_size; -} void __init finish_e820_parsing(void) { if (user_defined_memmap) { printk(KERN_INFO "user-defined physical RAM map:\n"); - print_memory_map("user"); + e820_print_map("user"); } } -void __init update_e820(void) -{ - u8 nr_map; - - nr_map = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr_map)) - return; - e820.nr_map = nr_map; - printk(KERN_INFO "modified physical RAM map:\n"); - print_memory_map("modified"); -} diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index c45b4dea4055..28a14eb65d3d 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -29,8 +29,6 @@ #include #include -struct e820map e820; - /* * PFN of last memory page. */ @@ -176,62 +174,6 @@ again: } return changed; } -/* - * This function checks if any part of the range is mapped - * with type. - */ -int -e820_any_mapped(unsigned long start, unsigned long end, unsigned type) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (type && ei->type != type) - continue; - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - return 1; - } - return 0; -} -EXPORT_SYMBOL_GPL(e820_any_mapped); - -/* - * This function checks if the entire range is mapped with type. - * - * Note: this function only works correct if the e820 table is sorted and - * not-overlapping, which is the case - */ -int __init e820_all_mapped(unsigned long start, unsigned long end, - unsigned type) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (type && ei->type != type) - continue; - /* is the region (part) in overlap with the current region ?*/ - if (ei->addr >= end || ei->addr + ei->size <= start) - continue; - - /* if the region is at the beginning of we move - * start to the end of the region since it's ok until there - */ - if (ei->addr <= start) - start = ei->addr + ei->size; - /* - * if start is now at or beyond end, we're done, full - * coverage - */ - if (start >= end) - return 1; - } - return 0; -} /* * Find a free area with specified alignment in a specific range. @@ -434,24 +376,6 @@ e820_register_active_regions(int nid, unsigned long start_pfn, add_active_range(nid, ei_startpfn, ei_endpfn); } -/* - * Add a memory region to the kernel e820 map. - */ -void __init add_memory_region(unsigned long start, unsigned long size, int type) -{ - int x = e820.nr_map; - - if (x == E820MAX) { - printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); - return; - } - - e820.map[x].addr = start; - e820.map[x].size = size; - e820.map[x].type = type; - e820.nr_map++; -} - /* * Find the hole size (in bytes) in the memory range. * @start: starting address of the memory range to scan @@ -473,266 +397,6 @@ unsigned long __init e820_hole_size(unsigned long start, unsigned long end) return end - start - (ram << PAGE_SHIFT); } -static void __init e820_print_map(char *who) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - printk(KERN_INFO " %s: %016Lx - %016Lx ", who, - (unsigned long long) e820.map[i].addr, - (unsigned long long) - (e820.map[i].addr + e820.map[i].size)); - switch (e820.map[i].type) { - case E820_RAM: - printk(KERN_CONT "(usable)\n"); - break; - case E820_RESERVED: - printk(KERN_CONT "(reserved)\n"); - break; - case E820_ACPI: - printk(KERN_CONT "(ACPI data)\n"); - break; - case E820_NVS: - printk(KERN_CONT "(ACPI NVS)\n"); - break; - default: - printk(KERN_CONT "type %u\n", e820.map[i].type); - break; - } - } -} - -/* - * Sanitize the BIOS e820 map. - * - * Some e820 responses include overlapping entries. The following - * replaces the original e820 map with a new one, removing overlaps. - * - */ -static int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map) -{ - struct change_member { - struct e820entry *pbios; /* pointer to original bios entry */ - unsigned long long addr; /* address for this change point */ - }; - static struct change_member change_point_list[2*E820MAX] __initdata; - static struct change_member *change_point[2*E820MAX] __initdata; - static struct e820entry *overlap_list[E820MAX] __initdata; - static struct e820entry new_bios[E820MAX] __initdata; - struct change_member *change_tmp; - unsigned long current_type, last_type; - unsigned long long last_addr; - int chgidx, still_changing; - int overlap_entries; - int new_bios_entry; - int old_nr, new_nr, chg_nr; - int i; - - /* - Visually we're performing the following - (1,2,3,4 = memory types)... - - Sample memory map (w/overlaps): - ____22__________________ - ______________________4_ - ____1111________________ - _44_____________________ - 11111111________________ - ____________________33__ - ___________44___________ - __________33333_________ - ______________22________ - ___________________2222_ - _________111111111______ - _____________________11_ - _________________4______ - - Sanitized equivalent (no overlap): - 1_______________________ - _44_____________________ - ___1____________________ - ____22__________________ - ______11________________ - _________1______________ - __________3_____________ - ___________44___________ - _____________33_________ - _______________2________ - ________________1_______ - _________________4______ - ___________________2____ - ____________________33__ - ______________________4_ - */ - - /* if there's only one memory region, don't bother */ - if (*pnr_map < 2) - return -1; - - old_nr = *pnr_map; - - /* bail out if we find any unreasonable addresses in bios map */ - for (i = 0; i < old_nr; i++) - if (biosmap[i].addr + biosmap[i].size < biosmap[i].addr) - return -1; - - /* create pointers for initial change-point information (for sorting) */ - for (i = 0; i < 2 * old_nr; i++) - change_point[i] = &change_point_list[i]; - - /* record all known change-points (starting and ending addresses), - omitting those that are for empty memory regions */ - chgidx = 0; - for (i = 0; i < old_nr; i++) { - if (biosmap[i].size != 0) { - change_point[chgidx]->addr = biosmap[i].addr; - change_point[chgidx++]->pbios = &biosmap[i]; - change_point[chgidx]->addr = biosmap[i].addr + - biosmap[i].size; - change_point[chgidx++]->pbios = &biosmap[i]; - } - } - chg_nr = chgidx; - - /* sort change-point list by memory addresses (low -> high) */ - still_changing = 1; - while (still_changing) { - still_changing = 0; - for (i = 1; i < chg_nr; i++) { - unsigned long long curaddr, lastaddr; - unsigned long long curpbaddr, lastpbaddr; - - curaddr = change_point[i]->addr; - lastaddr = change_point[i - 1]->addr; - curpbaddr = change_point[i]->pbios->addr; - lastpbaddr = change_point[i - 1]->pbios->addr; - - /* - * swap entries, when: - * - * curaddr > lastaddr or - * curaddr == lastaddr and curaddr == curpbaddr and - * lastaddr != lastpbaddr - */ - if (curaddr < lastaddr || - (curaddr == lastaddr && curaddr == curpbaddr && - lastaddr != lastpbaddr)) { - change_tmp = change_point[i]; - change_point[i] = change_point[i-1]; - change_point[i-1] = change_tmp; - still_changing = 1; - } - } - } - - /* create a new bios memory map, removing overlaps */ - overlap_entries = 0; /* number of entries in the overlap table */ - new_bios_entry = 0; /* index for creating new bios map entries */ - last_type = 0; /* start with undefined memory type */ - last_addr = 0; /* start with 0 as last starting address */ - - /* loop through change-points, determining affect on the new bios map */ - for (chgidx = 0; chgidx < chg_nr; chgidx++) { - /* keep track of all overlapping bios entries */ - if (change_point[chgidx]->addr == - change_point[chgidx]->pbios->addr) { - /* - * add map entry to overlap list (> 1 entry - * implies an overlap) - */ - overlap_list[overlap_entries++] = - change_point[chgidx]->pbios; - } else { - /* - * remove entry from list (order independent, - * so swap with last) - */ - for (i = 0; i < overlap_entries; i++) { - if (overlap_list[i] == - change_point[chgidx]->pbios) - overlap_list[i] = - overlap_list[overlap_entries-1]; - } - overlap_entries--; - } - /* - * if there are overlapping entries, decide which - * "type" to use (larger value takes precedence -- - * 1=usable, 2,3,4,4+=unusable) - */ - current_type = 0; - for (i = 0; i < overlap_entries; i++) - if (overlap_list[i]->type > current_type) - current_type = overlap_list[i]->type; - /* - * continue building up new bios map based on this - * information - */ - if (current_type != last_type) { - if (last_type != 0) { - new_bios[new_bios_entry].size = - change_point[chgidx]->addr - last_addr; - /* - * move forward only if the new size - * was non-zero - */ - if (new_bios[new_bios_entry].size != 0) - /* - * no more space left for new - * bios entries ? - */ - if (++new_bios_entry >= E820MAX) - break; - } - if (current_type != 0) { - new_bios[new_bios_entry].addr = - change_point[chgidx]->addr; - new_bios[new_bios_entry].type = current_type; - last_addr = change_point[chgidx]->addr; - } - last_type = current_type; - } - } - /* retain count for new bios entries */ - new_nr = new_bios_entry; - - /* copy new bios mapping into original location */ - memcpy(biosmap, new_bios, new_nr * sizeof(struct e820entry)); - *pnr_map = new_nr; - - return 0; -} - -/* - * Copy the BIOS e820 map into a safe place. - * - * Sanity-check it while we're at it.. - * - * If we're lucky and live on a modern system, the setup code - * will have given us a memory map that we can use to properly - * set up memory. If we aren't, we'll fake a memory map. - */ -static int __init copy_e820_map(struct e820entry *biosmap, int nr_map) -{ - /* Only one memory region (or negative)? Ignore it */ - if (nr_map < 2) - return -1; - - do { - u64 start = biosmap->addr; - u64 size = biosmap->size; - u64 end = start + size; - u32 type = biosmap->type; - - /* Overflow in 64 bits? Ignore the memory map. */ - if (start > end) - return -1; - - add_memory_region(start, size, type); - } while (biosmap++, --nr_map); - return 0; -} - static void early_panic(char *msg) { early_printk(msg); @@ -829,114 +493,6 @@ void __init finish_e820_parsing(void) } } -u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, - unsigned new_type) -{ - int i; - u64 real_updated_size = 0; - - BUG_ON(old_type == new_type); - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - u64 final_start, final_end; - if (ei->type != old_type) - continue; - /* totally covered? */ - if (ei->addr >= start && - (ei->addr + ei->size) <= (start + size)) { - ei->type = new_type; - real_updated_size += ei->size; - continue; - } - /* partially covered */ - final_start = max(start, ei->addr); - final_end = min(start + size, ei->addr + ei->size); - if (final_start >= final_end) - continue; - add_memory_region(final_start, final_end - final_start, - new_type); - real_updated_size += final_end - final_start; - } - return real_updated_size; -} - -void __init update_e820(void) -{ - u8 nr_map; - - nr_map = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr_map)) - return; - e820.nr_map = nr_map; - printk(KERN_INFO "modified physical RAM map:\n"); - e820_print_map("modified"); -} - -unsigned long pci_mem_start = 0xaeedbabe; -EXPORT_SYMBOL(pci_mem_start); - -/* - * Search for the biggest gap in the low 32 bits of the e820 - * memory space. We pass this space to PCI to assign MMIO resources - * for hotplug or unconfigured devices in. - * Hopefully the BIOS let enough space left. - */ -__init void e820_setup_gap(void) -{ - unsigned long gapstart, gapsize, round; - unsigned long last; - int i; - int found = 0; - - last = 0x100000000ull; - gapstart = 0x10000000; - gapsize = 0x400000; - i = e820.nr_map; - while (--i >= 0) { - unsigned long long start = e820.map[i].addr; - unsigned long long end = start + e820.map[i].size; - - /* - * Since "last" is at most 4GB, we know we'll - * fit in 32 bits if this condition is true - */ - if (last > end) { - unsigned long gap = last - end; - - if (gap > gapsize) { - gapsize = gap; - gapstart = end; - found = 1; - } - } - if (start < last) - last = start; - } - - if (!found) { - gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024; - printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit " - "address range\n" - KERN_ERR "PCI: Unassigned devices with 32bit resource " - "registers may break!\n"); - } - - /* - * See how much we want to round up: start off with - * rounding to the next 1MB area. - */ - round = 0x100000; - while ((gapsize >> 4) > round) - round += round; - /* Fun with two's complement */ - pci_mem_start = (gapstart + round) & -round; - - printk(KERN_INFO - "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n", - pci_mem_start, gapstart, gapsize); -} - int __init arch_get_ram_range(int slot, u64 *addr, u64 *size) { int i; diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index b54c79c91efd..5faeab69edd9 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -875,7 +875,7 @@ void __init setup_arch(char **cmdline_p) get_smp_config(); #endif - e820_register_memory(); + e820_setup_gap(); e820_mark_nosave_regions(); #ifdef CONFIG_VT diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 7004251fc66b..b5b519feba1d 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -20,6 +20,20 @@ struct e820map { __u32 nr_map; struct e820entry map[E820MAX]; }; + +extern struct e820map e820; + +extern int e820_any_mapped(u64 start, u64 end, unsigned type); +extern int e820_all_mapped(u64 start, u64 end, unsigned type); +extern void add_memory_region(u64 start, u64 size, int type); +extern void e820_print_map(char *who); +extern int sanitize_e820_map(struct e820entry *biosmap, char *pnr_map); +extern int copy_e820_map(struct e820entry *biosmap, int nr_map); +extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, + unsigned new_type); +extern void update_e820(void); +extern void e820_setup_gap(void); + #endif /* __ASSEMBLY__ */ #define ISA_START_ADDRESS 0xa0000 diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h index af0711b220df..9576b438fbd9 100644 --- a/include/asm-x86/e820_32.h +++ b/include/asm-x86/e820_32.h @@ -21,19 +21,8 @@ extern void setup_memory_map(void); extern void finish_e820_parsing(void); -extern struct e820map e820; -extern void update_e820(void); - -extern int e820_all_mapped(unsigned long start, unsigned long end, - unsigned type); -extern int e820_any_mapped(u64 start, u64 end, unsigned type); extern void propagate_e820_map(void); extern void register_bootmem_low_pages(unsigned long max_low_pfn); -extern void add_memory_region(unsigned long long start, - unsigned long long size, int type); -extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, - unsigned new_type); -extern void e820_register_memory(void); extern void limit_regions(unsigned long long size); extern void init_iomem_resources(struct resource *code_resource, struct resource *data_resource, @@ -47,6 +36,5 @@ static inline void e820_mark_nosave_regions(void) } #endif - #endif/*!__ASSEMBLY__*/ #endif/*__E820_HEADER*/ diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h index 6ae3e2803286..9fac77e01441 100644 --- a/include/asm-x86/e820_64.h +++ b/include/asm-x86/e820_64.h @@ -19,34 +19,22 @@ extern unsigned long find_e820_area(unsigned long start, unsigned long end, extern unsigned long find_e820_area_size(unsigned long start, unsigned long *sizep, unsigned long align); -extern void add_memory_region(unsigned long start, unsigned long size, - int type); -extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, - unsigned new_type); extern void setup_memory_region(void); extern void contig_e820_setup(void); extern unsigned long e820_end_of_ram(void); extern void e820_reserve_resources(void); extern void e820_mark_nosave_regions(void); -extern int e820_any_mapped(unsigned long start, unsigned long end, - unsigned type); -extern int e820_all_mapped(unsigned long start, unsigned long end, - unsigned type); extern int e820_any_non_reserved(unsigned long start, unsigned long end); extern int is_memory_any_valid(unsigned long start, unsigned long end); extern int e820_all_non_reserved(unsigned long start, unsigned long end); extern int is_memory_all_valid(unsigned long start, unsigned long end); extern unsigned long e820_hole_size(unsigned long start, unsigned long end); -extern void e820_setup_gap(void); extern void e820_register_active_regions(int nid, unsigned long start_pfn, unsigned long end_pfn); extern void finish_e820_parsing(void); -extern struct e820map e820; -extern void update_e820(void); - extern void reserve_early(unsigned long start, unsigned long end, char *name); extern void free_early(unsigned long start, unsigned long end); extern void early_res_to_bootmem(unsigned long start, unsigned long end); -- cgit v1.2.3 From 8004dd965b13b01a96def054d420f6df7ff22d53 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 12 May 2008 17:40:39 -0700 Subject: x86: amd opteron TOM2 mask val fix there is a typo in the mask value, need to remove that extra 0, to avoid 4bit clearing. Signed-off-by: Yinghal Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/generic.c | 2 +- arch/x86/pci/k8-bus_64.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index a83f5cd78885..509bd3d9eacd 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -233,7 +233,7 @@ void __init get_mtrr_state(void) mtrr_tom2 = high; mtrr_tom2 <<= 32; mtrr_tom2 |= low; - mtrr_tom2 &= 0xffffff8000000ULL; + mtrr_tom2 &= 0xffffff800000ULL; } if (mtrr_show) { int high_width; diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/k8-bus_64.c index 5c2799c20e47..bfefdf0f40d4 100644 --- a/arch/x86/pci/k8-bus_64.c +++ b/arch/x86/pci/k8-bus_64.c @@ -384,7 +384,7 @@ static int __init early_fill_mp_bus_info(void) /* need to take out [0, TOM) for RAM*/ address = MSR_K8_TOP_MEM1; rdmsrl(address, val); - end = (val & 0xffffff8000000ULL); + end = (val & 0xffffff800000ULL); printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20); if (end < (1ULL<<32)) update_range(range, 0, end - 1); @@ -478,7 +478,7 @@ static int __init early_fill_mp_bus_info(void) /* TOP_MEM2 */ address = MSR_K8_TOP_MEM2; rdmsrl(address, val); - end = (val & 0xffffff8000000ULL); + end = (val & 0xffffff800000ULL); printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20); update_range(range, 1ULL<<32, end - 1); } -- cgit v1.2.3 From 3f03c54a34fa3da680b3341dd3ba965ef3394bd1 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 9 May 2008 22:40:52 -0700 Subject: x86: mtrr cleanup for converting continuous to discrete layout - fix #2 disable the noisy print out. also use the one the less spare mtrr reg. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/main.c | 79 +++++++++++++++++++++++++---------------- 1 file changed, 48 insertions(+), 31 deletions(-) diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index e6c162c379ac..0642201784e0 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -730,6 +730,7 @@ struct var_mtrr_range_state { }; struct var_mtrr_range_state __initdata range_state[RANGE_NUM]; +static int __initdata debug_print; static int __init x86_get_mtrr_mem_range(struct res_range *range, int nr_range, @@ -748,10 +749,12 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range, nr_range = add_range_with_merge(range, nr_range, base, base + size - 1); } - printk(KERN_DEBUG "After WB checking\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + if (debug_print) { + printk(KERN_DEBUG "After WB checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + } /* take out UC ranges */ for (i = 0; i < num_var_ranges; i++) { @@ -775,17 +778,21 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range, continue; nr_range++; } - printk(KERN_DEBUG "After UC checking\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", - range[i].start, range[i].end + 1); + if (debug_print) { + printk(KERN_DEBUG "After UC checking\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + range[i].start, range[i].end + 1); + } /* sort the ranges */ sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); - printk(KERN_DEBUG "After sorting\n"); - for (i = 0; i < nr_range; i++) - printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", + if (debug_print) { + printk(KERN_DEBUG "After sorting\n"); + for (i = 0; i < nr_range; i++) + printk(KERN_DEBUG "MTRR MAP PFN: %016lx - %016lx\n", range[i].start, range[i].end + 1); + } /* clear those is not used */ for (i = nr_range; i < RANGE_NUM; i++) @@ -912,12 +919,13 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk, align = max_align; sizek = 1 << align; - printk(KERN_DEBUG "Setting variable MTRR %d, base: %ldMB, " - "range: %ldMB, type %s\n", - reg, range_startk >> 10, sizek >> 10, - (type == MTRR_TYPE_UNCACHABLE)?"UC": - ((type == MTRR_TYPE_WRBACK)?"WB":"Other") - ); + if (debug_print) + printk(KERN_DEBUG "Setting variable MTRR %d, " + "base: %ldMB, range: %ldMB, type %s\n", + reg, range_startk >> 10, sizek >> 10, + (type == MTRR_TYPE_UNCACHABLE)?"UC": + ((type == MTRR_TYPE_WRBACK)?"WB":"Other") + ); save_var_mtrr(reg++, range_startk, sizek, type); range_startk += sizek; range_sizek -= sizek; @@ -963,7 +971,9 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, range0_basek = state->range_startk; range0_sizek = ALIGN(state->range_sizek, chunk_sizek); if (range0_sizek == state->range_sizek) { - printk(KERN_DEBUG "rangeX: %016lx - %016lx\n", range0_basek<<10, + if (debug_print) + printk(KERN_DEBUG "rangeX: %016lx - %016lx\n", + range0_basek<<10, (range0_basek + state->range_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, state->range_sizek, MTRR_TYPE_WRBACK); @@ -980,7 +990,9 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, } if (range0_sizek) { - printk(KERN_DEBUG "range0: %016lx - %016lx\n", range0_basek<<10, + if (debug_print) + printk(KERN_DEBUG "range0: %016lx - %016lx\n", + range0_basek<<10, (range0_basek + range0_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, range0_sizek, MTRR_TYPE_WRBACK); @@ -1016,13 +1028,15 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, second_sizek = 0; } - printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10, + if (debug_print) + printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10, (range_basek + range_sizek)<<10); state->reg = range_to_mtrr(state->reg, range_basek, range_sizek, MTRR_TYPE_WRBACK); if (hole_sizek) { - printk(KERN_DEBUG "hole: %016lx - %016lx\n", hole_basek<<10, - (hole_basek + hole_sizek)<<10); + if (debug_print) + printk(KERN_DEBUG "hole: %016lx - %016lx\n", + hole_basek<<10, (hole_basek + hole_sizek)<<10); state->reg = range_to_mtrr(state->reg, hole_basek, hole_sizek, MTRR_TYPE_UNCACHABLE); @@ -1120,7 +1134,6 @@ x86_setup_var_mtrrs(struct res_range *range, int nr_range, /* Write the last range */ if (var_state.range_sizek != 0) range_to_mtrr_with_hole(&var_state, 0, 0); - printk(KERN_DEBUG "DONE variable MTRRs\n"); num_reg = var_state.reg; /* Clear out the extra MTRR's */ @@ -1219,6 +1232,7 @@ static int __init mtrr_cleanup(unsigned address_bits) if (mtrr_chunk_size && mtrr_gran_size) { int num_reg; + debug_print = 1; /* convert ranges to var ranges state */ num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size, mtrr_gran_size); @@ -1242,8 +1256,8 @@ static int __init mtrr_cleanup(unsigned address_bits) result[i].lose_cover_sizek = (range_sums - range_sums_new) << PSHIFT; - printk(KERN_INFO " %sgran_size: %ldM \tchunk_size: %ldM \t", - result[i].bad?" BAD ":"", result[i].gran_sizek >> 10, + printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", + result[i].bad?"*BAD*":" ", result[i].gran_sizek >> 10, result[i].chunk_sizek >> 10); printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", result[i].num_reg, result[i].bad?"-":"", @@ -1254,6 +1268,7 @@ static int __init mtrr_cleanup(unsigned address_bits) } printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, " "will find optimal one\n"); + debug_print = 0; memset(result, 0, sizeof(result[0])); } @@ -1265,9 +1280,10 @@ static int __init mtrr_cleanup(unsigned address_bits) chunk_size <<= 1) { int num_reg; - printk(KERN_INFO + if (debug_print) + printk(KERN_INFO "\ngran_size: %lldM chunk_size_size: %lldM\n", - gran_size >> 20, chunk_size >> 20); + gran_size >> 20, chunk_size >> 20); if (i >= NUM_RESULT) continue; @@ -1310,10 +1326,10 @@ static int __init mtrr_cleanup(unsigned address_bits) /* print out all */ for (i = 0; i < NUM_RESULT; i++) { - printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", + printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", result[i].bad?"*BAD* ":" ", result[i].gran_sizek >> 10, result[i].chunk_sizek >> 10); - printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", + printk(KERN_CONT "num_reg: %d \tlose RAM: %s%ldM\n", result[i].num_reg, result[i].bad?"-":"", result[i].lose_cover_sizek >> 10); } @@ -1322,7 +1338,7 @@ static int __init mtrr_cleanup(unsigned address_bits) if (nr_mtrr_spare_reg >= num_var_ranges) nr_mtrr_spare_reg = num_var_ranges - 1; num_reg_good = -1; - for (i = 1; i < num_var_ranges + 1 - nr_mtrr_spare_reg; i++) { + for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) { if (!min_loss_pfn[i]) { num_reg_good = i; break; @@ -1344,10 +1360,10 @@ static int __init mtrr_cleanup(unsigned address_bits) if (index_good != -1) { printk(KERN_INFO "Found optimal setting for mtrr clean up\n"); i = index_good; - printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t", + printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t", result[i].gran_sizek >> 10, result[i].chunk_sizek >> 10); - printk(KERN_CONT "num_reg: %d \tlose cover RAM: %ldM \n", + printk(KERN_CONT "num_reg: %d \tlose RAM: %ldM\n", result[i].num_reg, result[i].lose_cover_sizek >> 10); /* convert ranges to var ranges state */ @@ -1355,6 +1371,7 @@ static int __init mtrr_cleanup(unsigned address_bits) chunk_size <<= 10; gran_size = result[i].gran_sizek; gran_size <<= 10; + debug_print = 1; x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size); set_var_mtrr_all(address_bits); return 1; -- cgit v1.2.3 From e3f8ba81fdce852abe36a33eed7b243c4a0acfac Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:04 -0700 Subject: x86 boot: include missing smp.h header The patch: x86: convert cpu_to_apicid to be a per cpu variable introduced a dependency of ipi.h on smp.h in x86 builds with an allnoconfig. Including smp.h in ipi.h fixes the build error: In file included from arch/x86/kernel/traps_64.c:48: include/asm/ipi.h: In function 'send_IPI_mask_sequence': include/asm/ipi.h:114: error: 'per_cpu__x86_cpu_to_apicid' undeclared (first use in this function) Signed-off-by: Paul Jackson Cc: Mike Travis Signed-off-by: Ingo Molnar --- include/asm-x86/ipi.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-x86/ipi.h b/include/asm-x86/ipi.h index ecc80f341f37..196d63c28aa4 100644 --- a/include/asm-x86/ipi.h +++ b/include/asm-x86/ipi.h @@ -20,6 +20,7 @@ #include #include +#include /* * the following functions deal with sending IPIs between CPUs. -- cgit v1.2.3 From e9197bf0114661195bee35e7795cfc42164d9b2c Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:10 -0700 Subject: x86 boot: remove some unused extern function declarations Remove three extern declarations for routines that don't exist. Fix a typo in a comment. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/mm/numa_64.c | 2 +- include/linux/efi.h | 4 ---- 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index c5066d519e5d..afb07ffb931d 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -233,7 +233,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, else bootmap_start = round_up(start, PAGE_SIZE); /* - * SMP_CAHCE_BYTES could be enough, but init_bootmem_node like + * SMP_CACHE_BYTES could be enough, but init_bootmem_node like * to use that to align to PAGE_SIZE */ bootmap = early_node_mem(nodeid, bootmap_start, end, diff --git a/include/linux/efi.h b/include/linux/efi.h index a5f359a7ad0e..807373d467f7 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -287,7 +287,6 @@ efi_guid_unparse(efi_guid_t *guid, char *out) extern void efi_init (void); extern void *efi_get_pal_addr (void); extern void efi_map_pal_code (void); -extern void efi_map_memmap(void); extern void efi_memmap_walk (efi_freemem_callback_t callback, void *arg); extern void efi_gettimeofday (struct timespec *ts); extern void efi_enter_virtual_mode (void); /* switch EFI to virtual mode, if possible */ @@ -295,14 +294,11 @@ extern u64 efi_get_iobase (void); extern u32 efi_mem_type (unsigned long phys_addr); extern u64 efi_mem_attributes (unsigned long phys_addr); extern u64 efi_mem_attribute (unsigned long phys_addr, unsigned long size); -extern int efi_mem_attribute_range (unsigned long phys_addr, unsigned long size, - u64 attr); extern int __init efi_uart_console_only (void); extern void efi_initialize_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); extern unsigned long efi_get_time(void); extern int efi_set_rtc_mmss(unsigned long nowtime); -extern int is_available_memory(efi_memory_desc_t * md); extern struct efi_memory_map memmap; /** -- cgit v1.2.3 From cb5dd7c104c64d7ba8ff4dd3eec3d9b92c378937 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:16 -0700 Subject: x86 boot: add header comment to dmi.h stating what it is The "dmi.h" file did not state anywhere in the file what "DMI" was. For those who know, it's obvious. For the rest of us, I added a brief opening comment. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- drivers/firmware/dmi_scan.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index c5e3ed7e903b..455575be3560 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -8,6 +8,11 @@ #include #include +/* + * DMI stands for "Desktop Management Interface". It is part + * of and an antecedent to, SMBIOS, which stands for System + * Management BIOS. See further: http://www.dmtf.org/standards + */ static char dmi_empty_string[] = " "; static const char * __init dmi_string_nosave(const struct dmi_header *dm, u8 s) -- cgit v1.2.3 From c801ed3860fe2f84281d4cae4c3e6ca87e81e890 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:23 -0700 Subject: x86 boot: simplify pageblock_bits enum declaration The use of #defines with '##' pre-processor concatenation is a useful way to form several symbol names with a common pattern. But when there is just a single name obtained from that #define, it's just obfuscation. Better to just write the plain symbol name, as is. The following patch is a result of my wasting ten minutes looking through the kernel to figure out what 'PB_migrate_end' meant, and forgetting what I came to do, by the time I figured out that the #define PB_range macro defined it. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- include/linux/pageblock-flags.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/include/linux/pageblock-flags.h b/include/linux/pageblock-flags.h index e875905f7b12..e8c06122be36 100644 --- a/include/linux/pageblock-flags.h +++ b/include/linux/pageblock-flags.h @@ -25,13 +25,11 @@ #include -/* Macro to aid the definition of ranges of bits */ -#define PB_range(name, required_bits) \ - name, name ## _end = (name + required_bits) - 1 - /* Bit indices that affect a whole block of pages */ enum pageblock_bits { - PB_range(PB_migrate, 3), /* 3 bits required for migrate types */ + PB_migrate, + PB_migrate_end = PB_migrate + 3 - 1, + /* 3 bits required for migrate types */ NR_PAGEBLOCK_BITS }; -- cgit v1.2.3 From b25e31cec7788ccba5749d10f8f4343fffff4750 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:28 -0700 Subject: x86 boot: minor code format fixes in e820 and efi routines Standardize a few pointer declarations to not have the extra space after the '*' character. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820_64.c | 2 +- arch/x86/kernel/efi_64.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 28a14eb65d3d..c10b4aece5e4 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -404,7 +404,7 @@ static void early_panic(char *msg) } /* We're not void only for x86 32-bit compat */ -char * __init machine_specific_memory_setup(void) +char *__init machine_specific_memory_setup(void) { char *who = "BIOS-e820"; /* diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c index d0060fdcccac..21a7b759687a 100644 --- a/arch/x86/kernel/efi_64.c +++ b/arch/x86/kernel/efi_64.c @@ -103,7 +103,7 @@ void __init efi_reserve_bootmem(void) memmap.nr_map * memmap.desc_size); } -void __iomem * __init efi_ioremap(unsigned long phys_addr, unsigned long size) +void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size) { static unsigned pages_mapped __initdata; unsigned i, pages; -- cgit v1.2.3 From c3965bd15118742d72b4bc1a290d37b3f081eb98 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:34 -0700 Subject: x86 boot: proper use of ARRAY_SIZE instead of repeated E820MAX constant This patch is motivated by a subsequent patch which will allow for more memory map entries on EFI supported systems than can be passed via the x86 legacy BIOS E820 interface. The legacy interface is limited to E820MAX == 128 memory entries, and that "E820MAX" manifest constant was used as the size for several arrays and loops over those arrays. The primary change in this patch is to change code loop sizes over those arrays from using the constant E820MAX, to using the ARRAY_SIZE() macro evaluated for the array being looped. That way, a subsequent patch can change the size of some of these arrays, without breaking this code. This patch also adds a parameter to the sanitize_e820_map() routine, which had an implicit size for the array passed it of E820MAX entries. This new parameter explicitly passes the size of said array. Once again, this will allow a subsequent patch to change that array size for some calls to sanitize_e820_map() without breaking the code. As part of enhancing the sanitize_e820_map() interface this way, I further combined the unnecessarily distinct x86_32 and x86_64 declarations for this routine into a single, commonly used, declaration. This patch in itself should make no difference to the resulting kernel binary. [ mingo@elte.hu: merged to -tip ] Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/boot/memory.c | 3 ++- arch/x86/kernel/e820.c | 9 +++++---- arch/x86/kernel/e820_64.c | 6 ++++-- arch/x86/mach-default/setup.c | 4 +++- arch/x86/mach-voyager/setup.c | 4 +++- include/asm-x86/e820.h | 3 ++- include/asm-x86/setup.h | 1 - 7 files changed, 19 insertions(+), 11 deletions(-) diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c index acad32eb4290..53165c97336b 100644 --- a/arch/x86/boot/memory.c +++ b/arch/x86/boot/memory.c @@ -13,6 +13,7 @@ */ #include "boot.h" +#include #define SMAP 0x534d4150 /* ASCII "SMAP" */ @@ -53,7 +54,7 @@ static int detect_memory_e820(void) count++; desc++; - } while (next && count < E820MAX); + } while (next && count < ARRAY_SIZE(boot_params.e820_map)); return boot_params.e820_entries = count; } diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 2cb686f60d0d..2396b9da8027 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -95,7 +95,7 @@ void __init add_memory_region(u64 start, u64 size, int type) { int x = e820.nr_map; - if (x == E820MAX) { + if (x == ARRAY_SIZE(e820.map)) { printk(KERN_ERR "Ooops! Too many entries in the memory map!\n"); return; } @@ -142,7 +142,8 @@ void __init e820_print_map(char *who) * replaces the original e820 map with a new one, removing overlaps. * */ -int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map) +int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, + char *pnr_map) { struct change_member { struct e820entry *pbios; /* pointer to original bios entry */ @@ -314,7 +315,7 @@ int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map) * no more space left for new * bios entries ? */ - if (++new_bios_entry >= E820MAX) + if (++new_bios_entry >= max_nr_map) break; } if (current_type != 0) { @@ -403,7 +404,7 @@ void __init update_e820(void) u8 nr_map; nr_map = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr_map)) + if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map)) return; e820.nr_map = nr_map; printk(KERN_INFO "modified physical RAM map:\n"); diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index c10b4aece5e4..58dc6eee4d4f 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -413,7 +413,9 @@ char *__init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ - sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries); + sanitize_e820_map(boot_params.e820_map, + ARRAY_SIZE(boot_params.e820_map), + &boot_params.e820_entries); if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) early_panic("Cannot find a valid memory map"); printk(KERN_INFO "BIOS-provided physical RAM map:\n"); @@ -484,7 +486,7 @@ void __init finish_e820_parsing(void) if (userdef) { char nr = e820.nr_map; - if (sanitize_e820_map(e820.map, &nr) < 0) + if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0) early_panic("Invalid user supplied memory map"); e820.nr_map = nr; diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c index 0c28a071824c..38a856c4fc07 100644 --- a/arch/x86/mach-default/setup.c +++ b/arch/x86/mach-default/setup.c @@ -163,7 +163,9 @@ char * __init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ - sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries); + sanitize_e820_map(boot_params.e820_map, + ARRAY_SIZE(boot_params.e820_map), + &boot_params.e820_entries); if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { unsigned long mem_size; diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c index 5ae5466b9eb9..662b5c0a77d6 100644 --- a/arch/x86/mach-voyager/setup.c +++ b/arch/x86/mach-voyager/setup.c @@ -111,7 +111,9 @@ char *__init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ - sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries); + sanitize_e820_map(boot_params.e820_map, + ARRAY_SIZE(boot_params.e820_map), + &boot_params.e820_entries); if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { unsigned long mem_size; diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index b5b519feba1d..65c891d2a4cb 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -27,7 +27,8 @@ extern int e820_any_mapped(u64 start, u64 end, unsigned type); extern int e820_all_mapped(u64 start, u64 end, unsigned type); extern void add_memory_region(u64 start, u64 size, int type); extern void e820_print_map(char *who); -extern int sanitize_e820_map(struct e820entry *biosmap, char *pnr_map); +extern int +sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, char *pnr_map); extern int copy_e820_map(struct e820entry *biosmap, int nr_map); extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type); diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h index fa6763af8d26..ffa0f540fc7f 100644 --- a/include/asm-x86/setup.h +++ b/include/asm-x86/setup.h @@ -56,7 +56,6 @@ char * __init machine_specific_memory_setup(void); char *memory_setup(void); int __init copy_e820_map(struct e820entry *biosmap, int nr_map); -int __init sanitize_e820_map(struct e820entry *biosmap, char *pnr_map); void __init add_memory_region(unsigned long long start, unsigned long long size, int type); -- cgit v1.2.3 From 028b785888c523baccdf27af0cdbf1deb92edec0 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:40 -0700 Subject: x86 boot: extend some internal memory map arrays to handle larger EFI input Extend internal boot time memory tables to allow for up to three entries per node, which may be larger than the 128 E820MAX entries handled by the legacy BIOS E820 interface. The EFI interface, if present, is capable of passing memory map entries for these larger node counts. This patch requires an earlier patch that rewrote code depending on these array sizes from using E820MAX explicitly to size loops, to instead using ARRAY_SIZE() of the applicable array. Another patch following this one will provide the code to pick up additional memory entries passed via the EFI interface from the BIOS and insert them in the following, now enlarged, arrays. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 8 ++++---- include/asm-x86/e820.h | 37 ++++++++++++++++++++++++++++++++++++- 2 files changed, 40 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 2396b9da8027..3f7777b255aa 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -149,10 +149,10 @@ int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, struct e820entry *pbios; /* pointer to original bios entry */ unsigned long long addr; /* address for this change point */ }; - static struct change_member change_point_list[2*E820MAX] __initdata; - static struct change_member *change_point[2*E820MAX] __initdata; - static struct e820entry *overlap_list[E820MAX] __initdata; - static struct e820entry new_bios[E820MAX] __initdata; +static struct change_member change_point_list[2*E820_X_MAX] __initdata; +static struct change_member *change_point[2*E820_X_MAX] __initdata; +static struct e820entry *overlap_list[E820_X_MAX] __initdata; +static struct e820entry new_bios[E820_X_MAX] __initdata; struct change_member *change_tmp; unsigned long current_type, last_type; unsigned long long last_addr; diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 65c891d2a4cb..ab18457a95c0 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -2,6 +2,41 @@ #define __ASM_E820_H #define E820MAP 0x2d0 /* our map */ #define E820MAX 128 /* number of entries in E820MAP */ + +/* + * Legacy E820 BIOS limits us to 128 (E820MAX) nodes due to the + * constrained space in the zeropage. If we have more nodes than + * that, and if we've booted off EFI firmware, then the EFI tables + * passed us from the EFI firmware can list more nodes. Size our + * internal memory map tables to have room for these additional + * nodes, based on up to three entries per node for which the + * kernel was built: MAX_NUMNODES == (1 << CONFIG_NODES_SHIFT), + * plus E820MAX, allowing space for the possible duplicate E820 + * entries that might need room in the same arrays, prior to the + * call to sanitize_e820_map() to remove duplicates. The allowance + * of three memory map entries per node is "enough" entries for + * the initial hardware platform motivating this mechanism to make + * use of additional EFI map entries. Future platforms may want + * to allow more than three entries per node or otherwise refine + * this size. + */ + +/* + * Odd: 'make headers_check' complains about numa.h if I try + * to collapse the next two #ifdef lines to a single line: + * #if defined(__KERNEL__) && defined(CONFIG_EFI) + */ +#ifdef __KERNEL__ +#ifdef CONFIG_EFI +#include +#define E820_X_MAX (E820MAX + 3 * MAX_NUMNODES) +#else /* ! CONFIG_EFI */ +#define E820_X_MAX E820MAX +#endif +#else /* ! __KERNEL__ */ +#define E820_X_MAX E820MAX +#endif + #define E820NR 0x1e8 /* # entries in E820MAP */ #define E820_RAM 1 @@ -18,7 +53,7 @@ struct e820entry { struct e820map { __u32 nr_map; - struct e820entry map[E820MAX]; + struct e820entry map[E820_X_MAX]; }; extern struct e820map e820; -- cgit v1.2.3 From 6e9bcc796b120d17b08dde7ab958b82ddb899889 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:46 -0700 Subject: x86 boot: change sanitize_e820_map parameter from byte to int to allow bigger memory maps The map size counter passed into, and back out of, sanitize_e820_map(), was an eight bit type (char or u8), as derived from its origins in legacy BIOS E820 structures. This patch changes that type to an 'int', to allow this sanitize routine to also be used on larger maps (larger than the 256 count that fits in a char). The legacy BIOS E820 interface of course does not change; that remains at 8 bits for this count, holding up to E820MAX == 128 entries. But the kernel internals can handle more when those additional memory map entries are passed from the BIOS via EFI interfaces. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 5 +++-- arch/x86/kernel/e820_64.c | 7 +++++-- arch/x86/mach-default/setup.c | 5 ++++- arch/x86/mach-voyager/setup.c | 5 ++++- include/asm-x86/e820.h | 2 +- 5 files changed, 17 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 3f7777b255aa..91abf5b2fb94 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -143,7 +143,7 @@ void __init e820_print_map(char *who) * */ int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, - char *pnr_map) + int *pnr_map) { struct change_member { struct e820entry *pbios; /* pointer to original bios entry */ @@ -204,6 +204,7 @@ static struct e820entry new_bios[E820_X_MAX] __initdata; return -1; old_nr = *pnr_map; + BUG_ON(old_nr > max_nr_map); /* bail out if we find any unreasonable addresses in bios map */ for (i = 0; i < old_nr; i++) @@ -401,7 +402,7 @@ u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, void __init update_e820(void) { - u8 nr_map; + int nr_map; nr_map = e820.nr_map; if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map)) diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 58dc6eee4d4f..354fbb221709 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -407,15 +407,18 @@ static void early_panic(char *msg) char *__init machine_specific_memory_setup(void) { char *who = "BIOS-e820"; + int new_nr; /* * Try to copy the BIOS-supplied E820-map. * * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ + new_nr = boot_params.e820_entries; sanitize_e820_map(boot_params.e820_map, ARRAY_SIZE(boot_params.e820_map), - &boot_params.e820_entries); + &new_nr); + boot_params.e820_entries = new_nr; if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) early_panic("Cannot find a valid memory map"); printk(KERN_INFO "BIOS-provided physical RAM map:\n"); @@ -484,7 +487,7 @@ early_param("memmap", parse_memmap_opt); void __init finish_e820_parsing(void) { if (userdef) { - char nr = e820.nr_map; + int nr = e820.nr_map; if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0) early_panic("Invalid user supplied memory map"); diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c index 38a856c4fc07..56b4c39cb7fa 100644 --- a/arch/x86/mach-default/setup.c +++ b/arch/x86/mach-default/setup.c @@ -153,6 +153,7 @@ late_initcall(print_ipi_mode); char * __init machine_specific_memory_setup(void) { char *who; + int new_nr; who = "BIOS-e820"; @@ -163,9 +164,11 @@ char * __init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ + new_nr = boot_params.e820_entries; sanitize_e820_map(boot_params.e820_map, ARRAY_SIZE(boot_params.e820_map), - &boot_params.e820_entries); + &new_nr); + boot_params.e820_entries = new_nr; if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { unsigned long mem_size; diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c index 662b5c0a77d6..f4aca9fa9546 100644 --- a/arch/x86/mach-voyager/setup.c +++ b/arch/x86/mach-voyager/setup.c @@ -62,6 +62,7 @@ void __init time_init_hook(void) char *__init machine_specific_memory_setup(void) { char *who; + int new_nr; who = "NOT VOYAGER"; @@ -111,9 +112,11 @@ char *__init machine_specific_memory_setup(void) * Otherwise fake a memory map; one section from 0k->640k, * the next section from 1mb->appropriate_mem_k */ + new_nr = boot_params.e820_entries; sanitize_e820_map(boot_params.e820_map, ARRAY_SIZE(boot_params.e820_map), - &boot_params.e820_entries); + &new_nr); + boot_params.e820_entries = new_nr; if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { unsigned long mem_size; diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index ab18457a95c0..1eb13b881437 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -63,7 +63,7 @@ extern int e820_all_mapped(u64 start, u64 end, unsigned type); extern void add_memory_region(u64 start, u64 size, int type); extern void e820_print_map(char *who); extern int -sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, char *pnr_map); +sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, int *pnr_map); extern int copy_e820_map(struct e820entry *biosmap, int nr_map); extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, unsigned new_type); -- cgit v1.2.3 From 5b7eb2e9ef4e467a1248537b47a63bab265be3cc Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:52 -0700 Subject: x86 boot: longer comment explaining sanitize_e820_map routine Elaborate on the comment for sanitize_e820_map(), epxlaining more what it does, what it inputs, and what it returns. Rearrange the placement of this comment to fit kernel conventions, before the routine's code rather than buried inside it. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 94 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 56 insertions(+), 38 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 91abf5b2fb94..41c480ae47df 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -139,9 +139,64 @@ void __init e820_print_map(char *who) * Sanitize the BIOS e820 map. * * Some e820 responses include overlapping entries. The following - * replaces the original e820 map with a new one, removing overlaps. + * replaces the original e820 map with a new one, removing overlaps, + * and resolving conflicting memory types in favor of highest + * numbered type. * + * The input parameter biosmap points to an array of 'struct + * e820entry' which on entry has elements in the range [0, *pnr_map) + * valid, and which has space for up to max_nr_map entries. + * On return, the resulting sanitized e820 map entries will be in + * overwritten in the same location, starting at biosmap. + * + * The integer pointed to by pnr_map must be valid on entry (the + * current number of valid entries located at biosmap) and will + * be updated on return, with the new number of valid entries + * (something no more than max_nr_map.) + * + * The return value from sanitize_e820_map() is zero if it + * successfully 'sanitized' the map entries passed in, and is -1 + * if it did nothing, which can happen if either of (1) it was + * only passed one map entry, or (2) any of the input map entries + * were invalid (start + size < start, meaning that the size was + * so big the described memory range wrapped around through zero.) + * + * Visually we're performing the following + * (1,2,3,4 = memory types)... + * + * Sample memory map (w/overlaps): + * ____22__________________ + * ______________________4_ + * ____1111________________ + * _44_____________________ + * 11111111________________ + * ____________________33__ + * ___________44___________ + * __________33333_________ + * ______________22________ + * ___________________2222_ + * _________111111111______ + * _____________________11_ + * _________________4______ + * + * Sanitized equivalent (no overlap): + * 1_______________________ + * _44_____________________ + * ___1____________________ + * ____22__________________ + * ______11________________ + * _________1______________ + * __________3_____________ + * ___________44___________ + * _____________33_________ + * _______________2________ + * ________________1_______ + * _________________4______ + * ___________________2____ + * ____________________33__ + * ______________________4_ */ + int __init sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, int *pnr_map) { @@ -162,43 +217,6 @@ static struct e820entry new_bios[E820_X_MAX] __initdata; int old_nr, new_nr, chg_nr; int i; - /* - Visually we're performing the following - (1,2,3,4 = memory types)... - - Sample memory map (w/overlaps): - ____22__________________ - ______________________4_ - ____1111________________ - _44_____________________ - 11111111________________ - ____________________33__ - ___________44___________ - __________33333_________ - ______________22________ - ___________________2222_ - _________111111111______ - _____________________11_ - _________________4______ - - Sanitized equivalent (no overlap): - 1_______________________ - _44_____________________ - ___1____________________ - ____22__________________ - ______11________________ - _________1______________ - __________3_____________ - ___________44___________ - _____________33_________ - _______________2________ - ________________1_______ - _________________4______ - ___________________2____ - ____________________33__ - ______________________4_ - */ - /* if there's only one memory region, don't bother */ if (*pnr_map < 2) return -1; -- cgit v1.2.3 From 69c9189320c46b14e5ae3ad4b3a0d35cc63cba20 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Wed, 14 May 2008 08:15:58 -0700 Subject: x86 boot: add code to add BIOS provided EFI memory entries to kernel Add to the kernels boot memory map 'memmap' entries found in the EFI memory descriptors passed in from the BIOS. On EFI systems, up to E820MAX == 128 memory map entries can be passed via the legacy E820 interface (limited by the size of the 'zeropage'). These entries can be duplicated in the EFI descriptors also passed from the BIOS, and possibly more entries passed by the EFI interface, which does not have the E820MAX limit on number of memory map entries. This code doesn't worry about the likely duplicate, overlapping or (unlikely) conflicting entries between the EFI map and the E820 map. It just dumps all the EFI entries into the memmap[] array (which already has the E820 entries) and lets the existing routine sanitize_e820_map() sort the mess out. Signed-off-by: Paul Jackson Signed-off-by: Ingo Molnar --- arch/x86/kernel/efi.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index 77d424cf68b3..4a1a26d5931f 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -213,6 +213,31 @@ unsigned long efi_get_time(void) eft.minute, eft.second); } +/* + * Tell the kernel about the EFI memory map. This might include + * more than the max 128 entries that can fit in the e820 legacy + * (zeropage) memory map. + */ + +static void __init add_efi_memmap(void) +{ + void *p; + + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + efi_memory_desc_t *md = p; + unsigned long long start = md->phys_addr; + unsigned long long size = md->num_pages << EFI_PAGE_SHIFT; + int e820_type; + + if (md->attribute & EFI_MEMORY_WB) + e820_type = E820_RAM; + else + e820_type = E820_RESERVED; + add_memory_region(start, size, e820_type); + } + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); +} + #if EFI_DEBUG static void __init print_efi_memmap(void) { @@ -370,6 +395,7 @@ void __init efi_init(void) if (memmap.desc_size != sizeof(efi_memory_desc_t)) printk(KERN_WARNING "Kernel-defined memdesc" "doesn't match the one from EFI!\n"); + add_efi_memmap(); /* Setup for EFI runtime service */ reboot_type = BOOT_EFI; -- cgit v1.2.3 From a4c81cf684350797939416c99effb9d3ae46bca6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 18 May 2008 01:18:57 -0700 Subject: x86: extend e820 ealy_res support 32bit move early_res related from e820_64.c to e820.c make edba detection to be done in head32.c remove smp_alloc_memory, because we have fixed trampoline address now. Signed-off-by: Yinghai Lu arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 -------------------------------- arch/x86/kernel/head32.c | 76 ++++++++++++ arch/x86/kernel/setup_32.c | 109 +++--------------- arch/x86/kernel/smpboot.c | 17 -- arch/x86/kernel/trampoline.c | 2 arch/x86/mach-voyager/voyager_smp.c | 9 - include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 - include/asm-x86/smp.h | 1 10 files changed, 320 insertions(+), 319 deletions(-) Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 214 ++++++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_64.c | 196 --------------------------------- arch/x86/kernel/head32.c | 76 +++++++++++++ arch/x86/kernel/setup_32.c | 109 ++++-------------- arch/x86/kernel/smpboot.c | 17 --- arch/x86/kernel/trampoline.c | 2 +- arch/x86/mach-voyager/voyager_smp.c | 9 -- include/asm-x86/e820.h | 6 + include/asm-x86/e820_64.h | 9 -- include/asm-x86/smp.h | 1 - 10 files changed, 320 insertions(+), 319 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 41c480ae47df..35da8cdbe5e6 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -22,7 +22,9 @@ #include #include #include +#include #include +#include struct e820map e820; @@ -493,3 +495,215 @@ __init void e820_setup_gap(void) pci_mem_start, gapstart, gapsize); } + +/* + * Early reserved memory areas. + */ +#define MAX_EARLY_RES 20 + +struct early_res { + u64 start, end; + char name[16]; +}; +static struct early_res early_res[MAX_EARLY_RES] __initdata = { + { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */ +#if defined(CONFIG_X86_64) && defined(CONFIG_X86_TRAMPOLINE) + { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" }, +#endif +#if defined(CONFIG_X86_32) && defined(CONFIG_SMP) + /* + * But first pinch a few for the stack/trampoline stuff + * FIXME: Don't need the extra page at 4K, but need to fix + * trampoline before removing it. (see the GDT stuff) + */ + { PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE" }, + /* + * Has to be in very low memory so we can execute + * real-mode AP code. + */ + { TRAMPOLINE_BASE, TRAMPOLINE_BASE + PAGE_SIZE, "TRAMPOLINE" }, +#endif + {} +}; + +void __init reserve_early(u64 start, u64 end, char *name) +{ + int i; + struct early_res *r; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + r = &early_res[i]; + if (end > r->start && start < r->end) + panic("Overlapping early reservations %llx-%llx %s to %llx-%llx %s\n", + start, end - 1, name?name:"", r->start, + r->end - 1, r->name); + } + if (i >= MAX_EARLY_RES) + panic("Too many early reservations"); + r = &early_res[i]; + r->start = start; + r->end = end; + if (name) + strncpy(r->name, name, sizeof(r->name) - 1); +} + +void __init free_early(u64 start, u64 end) +{ + struct early_res *r; + int i, j; + + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + r = &early_res[i]; + if (start == r->start && end == r->end) + break; + } + if (i >= MAX_EARLY_RES || !early_res[i].end) + panic("free_early on not reserved area: %llx-%llx!", + start, end); + + for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++) + ; + + memmove(&early_res[i], &early_res[i + 1], + (j - 1 - i) * sizeof(struct early_res)); + + early_res[j - 1].end = 0; +} + +void __init early_res_to_bootmem(u64 start, u64 end) +{ + int i; + u64 final_start, final_end; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + struct early_res *r = &early_res[i]; + final_start = max(start, r->start); + final_end = min(end, r->end); + if (final_start >= final_end) + continue; + printk(KERN_INFO " early res: %d [%llx-%llx] %s\n", i, + final_start, final_end - 1, r->name); +#ifdef CONFIG_X86_64 + reserve_bootmem_generic(final_start, final_end - final_start); +#else + reserve_bootmem(final_start, final_end - final_start, + BOOTMEM_DEFAULT); +#endif + } +} + +/* Check for already reserved areas */ +static inline int __init bad_addr(u64 *addrp, u64 size, u64 align) +{ + int i; + u64 addr = *addrp, last; + int changed = 0; +again: + last = addr + size; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + struct early_res *r = &early_res[i]; + if (last >= r->start && addr < r->end) { + *addrp = addr = round_up(r->end, align); + changed = 1; + goto again; + } + } + return changed; +} + +/* Check for already reserved areas */ +static inline int __init bad_addr_size(u64 *addrp, u64 *sizep, u64 align) +{ + int i; + u64 addr = *addrp, last; + u64 size = *sizep; + int changed = 0; +again: + last = addr + size; + for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { + struct early_res *r = &early_res[i]; + if (last > r->start && addr < r->start) { + size = r->start - addr; + changed = 1; + goto again; + } + if (last > r->end && addr < r->end) { + addr = round_up(r->end, align); + size = last - addr; + changed = 1; + goto again; + } + if (last <= r->end && addr >= r->start) { + (*sizep)++; + return 0; + } + } + if (changed) { + *addrp = addr; + *sizep = size; + } + return changed; +} + +/* + * Find a free area with specified alignment in a specific range. + */ +u64 __init find_e820_area(u64 start, u64 end, u64 size, u64 align) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + u64 addr, last; + u64 ei_last; + + if (ei->type != E820_RAM) + continue; + addr = round_up(ei->addr, align); + ei_last = ei->addr + ei->size; + if (addr < start) + addr = round_up(start, align); + if (addr >= ei_last) + continue; + while (bad_addr(&addr, size, align) && addr+size <= ei_last) + ; + last = addr + size; + if (last > ei_last) + continue; + if (last > end) + continue; + return addr; + } + return -1ULL; +} + +/* + * Find next free range after *start + */ +u64 __init find_e820_area_size(u64 start, u64 *sizep, u64 align) +{ + int i; + + for (i = 0; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + u64 addr, last; + u64 ei_last; + + if (ei->type != E820_RAM) + continue; + addr = round_up(ei->addr, align); + ei_last = ei->addr + ei->size; + if (addr < start) + addr = round_up(start, align); + if (addr >= ei_last) + continue; + *sizep = ei_last - addr; + while (bad_addr_size(&addr, sizep, align) && + addr + *sizep <= ei_last) + ; + last = addr + *sizep; + if (last > ei_last) + continue; + return addr; + } + return -1UL; + +} diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 354fbb221709..07941b554519 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -46,202 +46,6 @@ unsigned long max_pfn_mapped; */ static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT; -/* - * Early reserved memory areas. - */ -#define MAX_EARLY_RES 20 - -struct early_res { - unsigned long start, end; - char name[16]; -}; -static struct early_res early_res[MAX_EARLY_RES] __initdata = { - { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */ -#ifdef CONFIG_X86_TRAMPOLINE - { TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" }, -#endif - {} -}; - -void __init reserve_early(unsigned long start, unsigned long end, char *name) -{ - int i; - struct early_res *r; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - r = &early_res[i]; - if (end > r->start && start < r->end) - panic("Overlapping early reservations %lx-%lx %s to %lx-%lx %s\n", - start, end - 1, name?name:"", r->start, r->end - 1, r->name); - } - if (i >= MAX_EARLY_RES) - panic("Too many early reservations"); - r = &early_res[i]; - r->start = start; - r->end = end; - if (name) - strncpy(r->name, name, sizeof(r->name) - 1); -} - -void __init free_early(unsigned long start, unsigned long end) -{ - struct early_res *r; - int i, j; - - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - r = &early_res[i]; - if (start == r->start && end == r->end) - break; - } - if (i >= MAX_EARLY_RES || !early_res[i].end) - panic("free_early on not reserved area: %lx-%lx!", start, end); - - for (j = i + 1; j < MAX_EARLY_RES && early_res[j].end; j++) - ; - - memmove(&early_res[i], &early_res[i + 1], - (j - 1 - i) * sizeof(struct early_res)); - - early_res[j - 1].end = 0; -} - -void __init early_res_to_bootmem(unsigned long start, unsigned long end) -{ - int i; - unsigned long final_start, final_end; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - struct early_res *r = &early_res[i]; - final_start = max(start, r->start); - final_end = min(end, r->end); - if (final_start >= final_end) - continue; - printk(KERN_INFO " early res: %d [%lx-%lx] %s\n", i, - final_start, final_end - 1, r->name); - reserve_bootmem_generic(final_start, final_end - final_start); - } -} - -/* Check for already reserved areas */ -static inline int __init -bad_addr(unsigned long *addrp, unsigned long size, unsigned long align) -{ - int i; - unsigned long addr = *addrp, last; - int changed = 0; -again: - last = addr + size; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - struct early_res *r = &early_res[i]; - if (last >= r->start && addr < r->end) { - *addrp = addr = round_up(r->end, align); - changed = 1; - goto again; - } - } - return changed; -} - -/* Check for already reserved areas */ -static inline int __init -bad_addr_size(unsigned long *addrp, unsigned long *sizep, unsigned long align) -{ - int i; - unsigned long addr = *addrp, last; - unsigned long size = *sizep; - int changed = 0; -again: - last = addr + size; - for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) { - struct early_res *r = &early_res[i]; - if (last > r->start && addr < r->start) { - size = r->start - addr; - changed = 1; - goto again; - } - if (last > r->end && addr < r->end) { - addr = round_up(r->end, align); - size = last - addr; - changed = 1; - goto again; - } - if (last <= r->end && addr >= r->start) { - (*sizep)++; - return 0; - } - } - if (changed) { - *addrp = addr; - *sizep = size; - } - return changed; -} - -/* - * Find a free area with specified alignment in a specific range. - */ -unsigned long __init find_e820_area(unsigned long start, unsigned long end, - unsigned long size, unsigned long align) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - unsigned long addr, last; - unsigned long ei_last; - - if (ei->type != E820_RAM) - continue; - addr = round_up(ei->addr, align); - ei_last = ei->addr + ei->size; - if (addr < start) - addr = round_up(start, align); - if (addr >= ei_last) - continue; - while (bad_addr(&addr, size, align) && addr+size <= ei_last) - ; - last = addr + size; - if (last > ei_last) - continue; - if (last > end) - continue; - return addr; - } - return -1UL; -} - -/* - * Find next free range after *start - */ -unsigned long __init find_e820_area_size(unsigned long start, - unsigned long *sizep, - unsigned long align) -{ - int i; - - for (i = 0; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - unsigned long addr, last; - unsigned long ei_last; - - if (ei->type != E820_RAM) - continue; - addr = round_up(ei->addr, align); - ei_last = ei->addr + ei->size; - if (addr < start) - addr = round_up(start, align); - if (addr >= ei_last) - continue; - *sizep = ei_last - addr; - while (bad_addr_size(&addr, sizep, align) && - addr + *sizep <= ei_last) - ; - last = addr + *sizep; - if (last > ei_last) - continue; - return addr; - } - return -1UL; - -} /* * Find the highest page frame number we have available */ diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 3db059058927..c216d3c2a991 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -8,7 +8,83 @@ #include #include +#include +#include +#include +#include + +#define BIOS_LOWMEM_KILOBYTES 0x413 + +/* + * The BIOS places the EBDA/XBDA at the top of conventional + * memory, and usually decreases the reported amount of + * conventional memory (int 0x12) too. This also contains a + * workaround for Dell systems that neglect to reserve EBDA. + * The same workaround also avoids a problem with the AMD768MPX + * chipset: reserve a page before VGA to prevent PCI prefetch + * into it (errata #56). Usually the page is reserved anyways, + * unless you have no PS/2 mouse plugged in. + */ +static void __init reserve_ebda_region(void) +{ + unsigned int lowmem, ebda_addr; + + /* To determine the position of the EBDA and the */ + /* end of conventional memory, we need to look at */ + /* the BIOS data area. In a paravirtual environment */ + /* that area is absent. We'll just have to assume */ + /* that the paravirt case can handle memory setup */ + /* correctly, without our help. */ + if (paravirt_enabled()) + return; + + /* end of low (conventional) memory */ + lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES); + lowmem <<= 10; + + /* start of EBDA area */ + ebda_addr = get_bios_ebda(); + + /* Fixup: bios puts an EBDA in the top 64K segment */ + /* of conventional memory, but does not adjust lowmem. */ + if ((lowmem - ebda_addr) <= 0x10000) + lowmem = ebda_addr; + + /* Fixup: bios does not report an EBDA at all. */ + /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */ + if ((ebda_addr == 0) && (lowmem >= 0x9f000)) + lowmem = 0x9f000; + + /* Paranoia: should never happen, but... */ + if ((lowmem == 0) || (lowmem >= 0x100000)) + lowmem = 0x9f000; + + /* reserve all memory between lowmem and the 1MB mark */ + reserve_early(lowmem, 0x100000, "BIOS reserved"); +} + void __init i386_start_kernel(void) { + reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS"); + +#ifdef CONFIG_BLK_DEV_INITRD + /* Reserve INITRD */ + if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) { + u64 ramdisk_image = boot_params.hdr.ramdisk_image; + u64 ramdisk_size = boot_params.hdr.ramdisk_size; + u64 ramdisk_end = ramdisk_image + ramdisk_size; + reserve_early(ramdisk_image, ramdisk_end, "RAMDISK"); + } +#endif + reserve_early(__pa_symbol(&_end), init_pg_tables_end, "INIT_PG_TABLE"); + + reserve_ebda_region(); + + /* + * At this point everything still needed from the boot loader + * or BIOS or kernel text should be early reserved or marked not + * RAM in e820. All other memory is free game. + */ + start_kernel(); } diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 5faeab69edd9..fed482c62450 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -359,56 +359,6 @@ unsigned long __init find_max_low_pfn(void) return max_low_pfn; } -#define BIOS_LOWMEM_KILOBYTES 0x413 - -/* - * The BIOS places the EBDA/XBDA at the top of conventional - * memory, and usually decreases the reported amount of - * conventional memory (int 0x12) too. This also contains a - * workaround for Dell systems that neglect to reserve EBDA. - * The same workaround also avoids a problem with the AMD768MPX - * chipset: reserve a page before VGA to prevent PCI prefetch - * into it (errata #56). Usually the page is reserved anyways, - * unless you have no PS/2 mouse plugged in. - */ -static void __init reserve_ebda_region(void) -{ - unsigned int lowmem, ebda_addr; - - /* To determine the position of the EBDA and the */ - /* end of conventional memory, we need to look at */ - /* the BIOS data area. In a paravirtual environment */ - /* that area is absent. We'll just have to assume */ - /* that the paravirt case can handle memory setup */ - /* correctly, without our help. */ - if (paravirt_enabled()) - return; - - /* end of low (conventional) memory */ - lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES); - lowmem <<= 10; - - /* start of EBDA area */ - ebda_addr = get_bios_ebda(); - - /* Fixup: bios puts an EBDA in the top 64K segment */ - /* of conventional memory, but does not adjust lowmem. */ - if ((lowmem - ebda_addr) <= 0x10000) - lowmem = ebda_addr; - - /* Fixup: bios does not report an EBDA at all. */ - /* Some old Dells seem to need 4k anyhow (bugzilla 2990) */ - if ((ebda_addr == 0) && (lowmem >= 0x9f000)) - lowmem = 0x9f000; - - /* Paranoia: should never happen, but... */ - if ((lowmem == 0) || (lowmem >= 0x100000)) - lowmem = 0x9f000; - - /* reserve all memory between lowmem and the 1MB mark */ - reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT); -} - #ifndef CONFIG_NEED_MULTIPLE_NODES static void __init setup_bootmem_allocator(void); static unsigned long __init setup_memory(void) @@ -522,25 +472,32 @@ static void __init reserve_initrd(void) unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT; unsigned long ramdisk_here; - initrd_start = 0; - if (!boot_params.hdr.type_of_loader || !ramdisk_image || !ramdisk_size) return; /* No initrd provided by bootloader */ + initrd_start = 0; + if (ramdisk_end < ramdisk_image) { + free_bootmem(ramdisk_image, ramdisk_size); printk(KERN_ERR "initrd wraps around end of memory, " "disabling initrd\n"); return; } if (ramdisk_size >= end_of_lowmem/2) { + free_bootmem(ramdisk_image, ramdisk_size); printk(KERN_ERR "initrd too large to handle, " "disabling initrd\n"); return; } + if (ramdisk_end <= end_of_lowmem) { /* All in lowmem, easy case */ - reserve_bootmem(ramdisk_image, ramdisk_size, BOOTMEM_DEFAULT); + /* + * don't need to reserve again, already reserved early + * in i386_start_kernel, and early_res_to_bootmem + * convert that to reserved in bootmem + */ initrd_start = ramdisk_image + PAGE_OFFSET; initrd_end = initrd_start+ramdisk_size; return; @@ -582,6 +539,8 @@ static void __init relocate_initrd(void) p = (char *)__va(ramdisk_image); memcpy(q, p, clen); q += clen; + /* need to free these low pages...*/ + free_bootmem(ramdisk_image, clen); ramdisk_image += clen; ramdisk_size -= clen; } @@ -600,47 +559,28 @@ static void __init relocate_initrd(void) ramdisk_image += clen; ramdisk_size -= clen; } + /* high pages is not converted by early_res_to_bootmem */ } #endif /* CONFIG_BLK_DEV_INITRD */ void __init setup_bootmem_allocator(void) { - unsigned long bootmap_size; + unsigned long bootmap_size, bootmap; /* * Initialize the boot-time allocator (with low memory only): */ - bootmap_size = init_bootmem(min_low_pfn, max_low_pfn); - + bootmap_size = bootmem_bootmap_pages(max_low_pfn)<> PAGE_SHIFT, max_low_pfn); register_bootmem_low_pages(max_low_pfn); + early_res_to_bootmem(0, max_low_pfn<llc_shared_map; } -#ifdef CONFIG_X86_32 -/* - * We are called very early to get the low memory for the - * SMP bootup trampoline page. - */ -void __init smp_alloc_memory(void) -{ - trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE); - /* - * Has to be in very low memory so we can execute - * real-mode AP code. - */ - if (__pa(trampoline_base) >= 0x9F000) - BUG(); -} -#endif - static void impress_friends(void) { int cpu; diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c index abbf199adebb..1106fac6024d 100644 --- a/arch/x86/kernel/trampoline.c +++ b/arch/x86/kernel/trampoline.c @@ -2,7 +2,7 @@ #include -/* ready for x86_64, no harm for x86, since it will overwrite after alloc */ +/* ready for x86_64 and x86 */ unsigned char *trampoline_base = __va(TRAMPOLINE_BASE); /* diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 8acbf0cdf1a5..7bbebbfe8c4e 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -1137,15 +1137,6 @@ void flush_tlb_all(void) on_each_cpu(do_flush_tlb_all, 0, 1, 1); } -/* used to set up the trampoline for other CPUs when the memory manager - * is sorted out */ -void __init smp_alloc_memory(void) -{ - trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE); - if (__pa(trampoline_base) >= 0x93000) - BUG(); -} - /* send a reschedule CPI to one CPU by physical CPU number*/ static void voyager_smp_send_reschedule(int cpu) { diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 1eb13b881437..5a58e2bb1d78 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -70,6 +70,12 @@ extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, extern void update_e820(void); extern void e820_setup_gap(void); +extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align); +extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align); +extern void reserve_early(u64 start, u64 end, char *name); +extern void free_early(u64 start, u64 end); +extern void early_res_to_bootmem(u64 start, u64 end); + #endif /* __ASSEMBLY__ */ #define ISA_START_ADDRESS 0xa0000 diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h index 9fac77e01441..37f176a02bc6 100644 --- a/include/asm-x86/e820_64.h +++ b/include/asm-x86/e820_64.h @@ -14,11 +14,6 @@ #include #ifndef __ASSEMBLY__ -extern unsigned long find_e820_area(unsigned long start, unsigned long end, - unsigned long size, unsigned long align); -extern unsigned long find_e820_area_size(unsigned long start, - unsigned long *sizep, - unsigned long align); extern void setup_memory_region(void); extern void contig_e820_setup(void); extern unsigned long e820_end_of_ram(void); @@ -35,10 +30,6 @@ extern void e820_register_active_regions(int nid, unsigned long start_pfn, extern void finish_e820_parsing(void); -extern void reserve_early(unsigned long start, unsigned long end, char *name); -extern void free_early(unsigned long start, unsigned long end); -extern void early_res_to_bootmem(unsigned long start, unsigned long end); - #endif/*!__ASSEMBLY__*/ #endif/*__E820_HEADER*/ diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h index 1ebaa5cd3112..514e52b95cef 100644 --- a/include/asm-x86/smp.h +++ b/include/asm-x86/smp.h @@ -201,7 +201,6 @@ extern void cpu_exit_clear(void); extern void cpu_uninit(void); #endif -extern void smp_alloc_memory(void); extern void lock_ipi_call_lock(void); extern void unlock_ipi_call_lock(void); #endif /* __ASSEMBLY__ */ -- cgit v1.2.3 From ba5b14cc0311af6ed20dc25aa98a1d5ea6f2e6c0 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 21 May 2008 18:40:18 -0700 Subject: x86: extend e820 ealy_res support 32bit - fix use find_e820_area to find addess for new RAMDISK, instead of using ram blindly also print out low ram and bootmap info Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/kernel/setup_32.c | 55 ++++++++++++++++++++++++++-------------------- 1 file changed, 31 insertions(+), 24 deletions(-) diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index fed482c62450..3c451d143eba 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -466,11 +466,11 @@ static bool do_relocate_initrd = false; static void __init reserve_initrd(void) { - unsigned long ramdisk_image = boot_params.hdr.ramdisk_image; - unsigned long ramdisk_size = boot_params.hdr.ramdisk_size; - unsigned long ramdisk_end = ramdisk_image + ramdisk_size; - unsigned long end_of_lowmem = max_low_pfn << PAGE_SHIFT; - unsigned long ramdisk_here; + u64 ramdisk_image = boot_params.hdr.ramdisk_image; + u64 ramdisk_size = boot_params.hdr.ramdisk_size; + u64 ramdisk_end = ramdisk_image + ramdisk_size; + u64 end_of_lowmem = max_low_pfn << PAGE_SHIFT; + u64 ramdisk_here; if (!boot_params.hdr.type_of_loader || !ramdisk_image || !ramdisk_size) @@ -478,14 +478,8 @@ static void __init reserve_initrd(void) initrd_start = 0; - if (ramdisk_end < ramdisk_image) { - free_bootmem(ramdisk_image, ramdisk_size); - printk(KERN_ERR "initrd wraps around end of memory, " - "disabling initrd\n"); - return; - } if (ramdisk_size >= end_of_lowmem/2) { - free_bootmem(ramdisk_image, ramdisk_size); + free_early(ramdisk_image, ramdisk_image + ramdisk_size - 1); printk(KERN_ERR "initrd too large to handle, " "disabling initrd\n"); return; @@ -495,8 +489,7 @@ static void __init reserve_initrd(void) /* All in lowmem, easy case */ /* * don't need to reserve again, already reserved early - * in i386_start_kernel, and early_res_to_bootmem - * convert that to reserved in bootmem + * in i386_start_kernel */ initrd_start = ramdisk_image + PAGE_OFFSET; initrd_end = initrd_start+ramdisk_size; @@ -504,11 +497,14 @@ static void __init reserve_initrd(void) } /* We need to move the initrd down into lowmem */ - ramdisk_here = (end_of_lowmem - ramdisk_size) & PAGE_MASK; + ramdisk_here = find_e820_area(min_low_pfn<> PAGE_SHIFT, max_low_pfn); + printk(KERN_INFO " low ram: %08lx - %08lx\n", + min_low_pfn< Date: Mon, 12 May 2008 15:43:35 +0200 Subject: x86: move mp_ioapic_routing to mpparse and make it static mpparse is the only user of mp_ioapic_routing. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 2 -- arch/x86/kernel/mpparse.c | 4 ++-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index c49ebcc6c41e..6f20fa92bbaf 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -331,8 +331,6 @@ acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long e #ifdef CONFIG_X86_IO_APIC -struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; - static int __init acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end) { diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 404683b94e79..bb7213335991 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -1,5 +1,5 @@ /* - * Intel Multiprocessor Specification 1.1 and 1.4 +2 * Intel Multiprocessor Specification 1.1 and 1.4 * compliant MP-table parsing routines. * * (c) 1995 Alan Cox, Building #3 @@ -805,7 +805,7 @@ int es7000_plat; #define MP_ISA_BUS 0 -extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; +static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; static int mp_find_ioapic(int gsi) { -- cgit v1.2.3 From a91eea6df383f26fc4fcbefcbdb5aee8facd17fd Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:37 +0200 Subject: x86: fix shadow variables of global end_pnf in e820_64.c Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820_64.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 07941b554519..5a9bc9244dc6 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -51,21 +51,21 @@ static unsigned long __initdata end_user_pfn = MAXMEM>>PAGE_SHIFT; */ unsigned long __init e820_end_of_ram(void) { - unsigned long end_pfn; + unsigned long last_pfn; - end_pfn = find_max_pfn_with_active_regions(); + last_pfn = find_max_pfn_with_active_regions(); - if (end_pfn > max_pfn_mapped) - max_pfn_mapped = end_pfn; + if (last_pfn > max_pfn_mapped) + max_pfn_mapped = last_pfn; if (max_pfn_mapped > MAXMEM>>PAGE_SHIFT) max_pfn_mapped = MAXMEM>>PAGE_SHIFT; - if (end_pfn > end_user_pfn) - end_pfn = end_user_pfn; - if (end_pfn > max_pfn_mapped) - end_pfn = max_pfn_mapped; + if (last_pfn > end_user_pfn) + last_pfn = end_user_pfn; + if (last_pfn > max_pfn_mapped) + last_pfn = max_pfn_mapped; printk(KERN_INFO "max_pfn_mapped = %lu\n", max_pfn_mapped); - return end_pfn; + return last_pfn; } /* @@ -124,12 +124,12 @@ void __init e820_mark_nosave_regions(void) } /* - * Finds an active region in the address range from start_pfn to end_pfn and + * Finds an active region in the address range from start_pfn to last_pfn and * returns its range in ei_startpfn and ei_endpfn for the e820 entry. */ static int __init e820_find_active_region(const struct e820entry *ei, unsigned long start_pfn, - unsigned long end_pfn, + unsigned long last_pfn, unsigned long *ei_startpfn, unsigned long *ei_endpfn) { @@ -146,14 +146,14 @@ static int __init e820_find_active_region(const struct e820entry *ei, /* Skip if map is outside the node */ if (ei->type != E820_RAM || *ei_endpfn <= start_pfn || - *ei_startpfn >= end_pfn) + *ei_startpfn >= last_pfn) return 0; /* Check for overlaps */ if (*ei_startpfn < start_pfn) *ei_startpfn = start_pfn; - if (*ei_endpfn > end_pfn) - *ei_endpfn = end_pfn; + if (*ei_endpfn > last_pfn) + *ei_endpfn = last_pfn; /* Obey end_user_pfn to save on memmap */ if (*ei_startpfn >= end_user_pfn) @@ -167,7 +167,7 @@ static int __init e820_find_active_region(const struct e820entry *ei, /* Walk the e820 map and register active regions within a node */ void __init e820_register_active_regions(int nid, unsigned long start_pfn, - unsigned long end_pfn) + unsigned long last_pfn) { unsigned long ei_startpfn; unsigned long ei_endpfn; @@ -175,7 +175,7 @@ e820_register_active_regions(int nid, unsigned long start_pfn, for (i = 0; i < e820.nr_map; i++) if (e820_find_active_region(&e820.map[i], - start_pfn, end_pfn, + start_pfn, last_pfn, &ei_startpfn, &ei_endpfn)) add_active_range(nid, ei_startpfn, ei_endpfn); } @@ -188,13 +188,13 @@ e820_register_active_regions(int nid, unsigned long start_pfn, unsigned long __init e820_hole_size(unsigned long start, unsigned long end) { unsigned long start_pfn = start >> PAGE_SHIFT; - unsigned long end_pfn = end >> PAGE_SHIFT; + unsigned long last_pfn = end >> PAGE_SHIFT; unsigned long ei_startpfn, ei_endpfn, ram = 0; int i; for (i = 0; i < e820.nr_map; i++) { if (e820_find_active_region(&e820.map[i], - start_pfn, end_pfn, + start_pfn, last_pfn, &ei_startpfn, &ei_endpfn)) ram += ei_endpfn - ei_startpfn; } -- cgit v1.2.3 From 4a139a7fdec8964cecf7a3564ee7ae327141d495 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:37 +0200 Subject: x86: include pci.h in e820_64.c global pci_mem_start needs a declaration. include pci.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820_64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 5a9bc9244dc6..3b2e0b1bb49b 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From 11a62a056093a7f25f1595fbd8bd5f93559572b6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 12 May 2008 15:43:38 +0200 Subject: x86: cleanup print out for mptable the new output is: MPTABLE: OEM ID: SUN MPTABLE: Product ID: 4600 M2 MPTABLE: APIC at: 0x instead of it all in one line with <6> and double Product ID... Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mpparse.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index bb7213335991..5a18b2b9852e 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -113,7 +113,7 @@ static void __init MP_bus_info(struct mpc_config_bus *m) #ifdef CONFIG_X86_NUMAQ mpc_oem_bus_info(m, str, translation_table[mpc_record]); #else - Dprintk("Bus #%d is %s\n", m->mpc_busid, str); + printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str); #endif #if MAX_MP_BUSSES < 256 @@ -183,7 +183,7 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m) static void __init MP_intsrc_info(struct mpc_config_intsrc *m) { mp_irqs[mp_irq_entries] = *m; - Dprintk("Int: type %d, pol %d, trig %d, bus %d," + printk(KERN_INFO "Int: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC INT %02x\n", m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, @@ -196,7 +196,7 @@ static void __init MP_intsrc_info(struct mpc_config_intsrc *m) static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m) { - Dprintk("Lint: type %d, pol %d, trig %d, bus %d," + printk(KERN_INFO "Lint: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC LINT %02x\n", m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid, @@ -309,16 +309,15 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) } memcpy(oem, mpc->mpc_oem, 8); oem[8] = 0; - printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem); + printk(KERN_INFO "MPTABLE: OEM ID: %s\n", oem); memcpy(str, mpc->mpc_productid, 12); str[12] = 0; - printk("Product ID: %s ", str); #ifdef CONFIG_X86_32 mps_oem_check(mpc, oem, str); #endif - printk(KERN_INFO "MPTABLE: Product ID: %s ", str); + printk(KERN_INFO "MPTABLE: Product ID: %s\n", str); printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic); @@ -689,7 +688,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, unsigned int *bp = phys_to_virt(base); struct intel_mp_floating *mpf; - Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length); + printk(KERN_DEBUG "Scan SMP from %p for %ld bytes.\n", bp, length); BUILD_BUG_ON(sizeof(*mpf) != 16); while (length > 0) { -- cgit v1.2.3 From 32c5061265caf201d6a2c0d02181e2b68769c22c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:02:51 +0400 Subject: x86: move es7000_plat out of mpparse.c Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/mpparse.c | 11 ++++++----- arch/x86/mach-es7000/es7000plat.c | 2 ++ include/asm-x86/system.h | 1 - 3 files changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 5a18b2b9852e..ff1342325efc 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -793,15 +793,14 @@ void __init find_smp_config(void) ACPI-based MP Configuration -------------------------------------------------------------------------- */ -/* - * Keep this outside and initialized to 0, for !CONFIG_ACPI builds: - */ -int es7000_plat; - #ifdef CONFIG_ACPI #ifdef CONFIG_X86_IO_APIC +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) +extern int es7000_plat; +#endif + #define MP_ISA_BUS 0 static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; @@ -928,11 +927,13 @@ void __init mp_config_acpi_legacy_irqs(void) set_bit(MP_ISA_BUS, mp_bus_not_pci); Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) /* * Older generations of ES7000 have no legacy identity mappings */ if (es7000_plat == 1) return; +#endif /* * Locate the IOAPIC that manages the ISA IRQs (0-15). diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/mach-es7000/es7000plat.c index f5d6f7d8b86e..a41c77a47227 100644 --- a/arch/x86/mach-es7000/es7000plat.c +++ b/arch/x86/mach-es7000/es7000plat.c @@ -52,6 +52,8 @@ static struct mip_reg *host_reg; static int mip_port; static unsigned long mip_addr, host_addr; +int es7000_plat; + /* * GSI override for ES7000 platforms. */ diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h index a2f04cd79b29..9f7f63ba0042 100644 --- a/include/asm-x86/system.h +++ b/include/asm-x86/system.h @@ -303,7 +303,6 @@ static inline void clflush(volatile void *__p) void disable_hlt(void); void enable_hlt(void); -extern int es7000_plat; void cpu_idle_wait(void); extern unsigned long arch_align_stack(unsigned long sp); -- cgit v1.2.3 From 11113f84c72bd832dc4e76122e613b0e623e2346 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:02:57 +0400 Subject: x86: complete move ACPI from mpparse.c Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 304 ++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/mpparse.c | 299 +------------------------------------------ 2 files changed, 305 insertions(+), 298 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 6f20fa92bbaf..b2ad09c4c6ae 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -846,6 +846,310 @@ static int __init acpi_parse_madt_lapic_entries(void) #endif /* CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_X86_IO_APIC +#define MP_ISA_BUS 0 + +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) +extern int es7000_plat; +#endif + +static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; + +static int mp_find_ioapic(int gsi) +{ + int i = 0; + + /* Find the IOAPIC that manages this GSI. */ + for (i = 0; i < nr_ioapics; i++) { + if ((gsi >= mp_ioapic_routing[i].gsi_base) + && (gsi <= mp_ioapic_routing[i].gsi_end)) + return i; + } + + printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); + return -1; +} + +static u8 __init uniq_ioapic_id(u8 id) +{ +#ifdef CONFIG_X86_32 + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) + return io_apic_get_unique_id(nr_ioapics, id); + else + return id; +#else + int i; + DECLARE_BITMAP(used, 256); + bitmap_zero(used, 256); + for (i = 0; i < nr_ioapics; i++) { + struct mpc_config_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->mpc_apicid, used); + } + if (!test_bit(id, used)) + return id; + return find_first_zero_bit(used, 256); +#endif +} + +static int bad_ioapic(unsigned long address) +{ + if (nr_ioapics >= MAX_IO_APICS) { + printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded " + "(found %d)\n", MAX_IO_APICS, nr_ioapics); + panic("Recompile kernel with bigger MAX_IO_APICS!\n"); + } + if (!address) { + printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address" + " found in table, skipping!\n"); + return 1; + } + return 0; +} + +void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) +{ + int idx = 0; + + if (bad_ioapic(address)) + return; + + idx = nr_ioapics; + + mp_ioapics[idx].mpc_type = MP_IOAPIC; + mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; + mp_ioapics[idx].mpc_apicaddr = address; + + set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); + mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); +#ifdef CONFIG_X86_32 + mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); +#else + mp_ioapics[idx].mpc_apicver = 0; +#endif + /* + * Build basic GSI lookup table to facilitate gsi->io_apic lookups + * and to prevent reprogramming of IOAPIC pins (PCI GSIs). + */ + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; + mp_ioapic_routing[idx].gsi_base = gsi_base; + mp_ioapic_routing[idx].gsi_end = gsi_base + + io_apic_get_redir_entries(idx); + + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " + "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, + mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, + mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); + + nr_ioapics++; +} + +void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) +{ + int ioapic = -1; + int pin = -1; + + /* + * Convert 'gsi' to 'ioapic.pin'. + */ + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return; + pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + + /* + * TBD: This check is for faulty timer entries, where the override + * erroneously sets the trigger to level, resulting in a HUGE + * increase of timer interrupts! + */ + if ((bus_irq == 0) && (trigger == 3)) + trigger = 1; + + mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mpc_irqflag = (trigger << 2) | polarity; + mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mpc_srcbusirq = bus_irq; /* IRQ */ + mp_irqs[mp_irq_entries].mpc_dstapic = + mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ + mp_irqs[mp_irq_entries].mpc_dstirq = pin; /* INTIN# */ + + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); + +} + +void __init mp_config_acpi_legacy_irqs(void) +{ + int i = 0; + int ioapic = -1; + +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) + /* + * Fabricate the legacy ISA bus (bus #31). + */ + mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; +#endif + set_bit(MP_ISA_BUS, mp_bus_not_pci); + Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); + +#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) + /* + * Older generations of ES7000 have no legacy identity mappings + */ + if (es7000_plat == 1) + return; +#endif + + /* + * Locate the IOAPIC that manages the ISA IRQs (0-15). + */ + ioapic = mp_find_ioapic(0); + if (ioapic < 0) + return; + + mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mpc_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; +#ifdef CONFIG_X86_IO_APIC + mp_irqs[mp_irq_entries].mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; +#endif + /* + * Use the default configuration for the IRQs 0-15. Unless + * overridden by (MADT) interrupt source override entries. + */ + for (i = 0; i < 16; i++) { + int idx; + + for (idx = 0; idx < mp_irq_entries; idx++) { + struct mpc_config_intsrc *irq = mp_irqs + idx; + + /* Do we already have a mapping for this ISA IRQ? */ + if (irq->mpc_srcbus == MP_ISA_BUS + && irq->mpc_srcbusirq == i) + break; + + /* Do we already have a mapping for this IOAPIC pin */ + if ((irq->mpc_dstapic == + mp_irqs[mp_irq_entries].mpc_dstapic) && + (irq->mpc_dstirq == i)) + break; + } + + if (idx != mp_irq_entries) { + printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); + continue; /* IRQ already used */ + } + + mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mpc_srcbusirq = i; /* Identity mapped */ + mp_irqs[mp_irq_entries].mpc_dstirq = i; + + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); + } +} + +int mp_register_gsi(u32 gsi, int triggering, int polarity) +{ + int ioapic; + int ioapic_pin; +#ifdef CONFIG_X86_32 +#define MAX_GSI_NUM 4096 +#define IRQ_COMPRESSION_START 64 + + static int pci_irq = IRQ_COMPRESSION_START; + /* + * Mapping between Global System Interrupts, which + * represent all possible interrupts, and IRQs + * assigned to actual devices. + */ + static int gsi_to_irq[MAX_GSI_NUM]; +#else + + if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) + return gsi; +#endif + + /* Don't set up the ACPI SCI because it's already set up */ + if (acpi_gbl_FADT.sci_interrupt == gsi) + return gsi; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) { + printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); + return gsi; + } + + ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; + +#ifdef CONFIG_X86_32 + if (ioapic_renumber_irq) + gsi = ioapic_renumber_irq(ioapic, gsi); +#endif + + /* + * Avoid pin reprogramming. PRTs typically include entries + * with redundant pin->gsi mappings (but unique PCI devices); + * we only program the IOAPIC on the first. + */ + if (ioapic_pin > MP_MAX_IOAPIC_PIN) { + printk(KERN_ERR "Invalid reference to IOAPIC pin " + "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + ioapic_pin); + return gsi; + } + if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { + Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", + mp_ioapic_routing[ioapic].apic_id, ioapic_pin); +#ifdef CONFIG_X86_32 + return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); +#else + return gsi; +#endif + } + + set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); +#ifdef CONFIG_X86_32 + /* + * For GSI >= 64, use IRQ compression + */ + if ((gsi >= IRQ_COMPRESSION_START) + && (triggering == ACPI_LEVEL_SENSITIVE)) { + /* + * For PCI devices assign IRQs in order, avoiding gaps + * due to unused I/O APIC pins. + */ + int irq = gsi; + if (gsi < MAX_GSI_NUM) { + /* + * Retain the VIA chipset work-around (gsi > 15), but + * avoid a problem where the 8254 timer (IRQ0) is setup + * via an override (so it's not on pin 0 of the ioapic), + * and at the same time, the pin 0 interrupt is a PCI + * type. The gsi > 15 test could cause these two pins + * to be shared as IRQ0, and they are not shareable. + * So test for this condition, and if necessary, avoid + * the pin collision. + */ + gsi = pci_irq++; + /* + * Don't assign IRQ used by ACPI SCI + */ + if (gsi == acpi_gbl_FADT.sci_interrupt) + gsi = pci_irq++; + gsi_to_irq[irq] = gsi; + } else { + printk(KERN_ERR "GSI %u is too high\n", gsi); + return gsi; + } + } +#endif + io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, + triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + return gsi; +} + /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index ff1342325efc..d05b70c329c4 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -1,5 +1,5 @@ /* -2 * Intel Multiprocessor Specification 1.1 and 1.4 + * Intel Multiprocessor Specification 1.1 and 1.4 * compliant MP-table parsing routines. * * (c) 1995 Alan Cox, Building #3 @@ -788,300 +788,3 @@ void __init find_smp_config(void) { __find_smp_config(1); } - -/* -------------------------------------------------------------------------- - ACPI-based MP Configuration - -------------------------------------------------------------------------- */ - -#ifdef CONFIG_ACPI - -#ifdef CONFIG_X86_IO_APIC - -#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) -extern int es7000_plat; -#endif - -#define MP_ISA_BUS 0 - -static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; - -static int mp_find_ioapic(int gsi) -{ - int i = 0; - - /* Find the IOAPIC that manages this GSI. */ - for (i = 0; i < nr_ioapics; i++) { - if ((gsi >= mp_ioapic_routing[i].gsi_base) - && (gsi <= mp_ioapic_routing[i].gsi_end)) - return i; - } - - printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); - return -1; -} - -static u8 __init uniq_ioapic_id(u8 id) -{ -#ifdef CONFIG_X86_32 - if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && - !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return io_apic_get_unique_id(nr_ioapics, id); - else - return id; -#else - int i; - DECLARE_BITMAP(used, 256); - bitmap_zero(used, 256); - for (i = 0; i < nr_ioapics; i++) { - struct mpc_config_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->mpc_apicid, used); - } - if (!test_bit(id, used)) - return id; - return find_first_zero_bit(used, 256); -#endif -} - -void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) -{ - int idx = 0; - - if (bad_ioapic(address)) - return; - - idx = nr_ioapics; - - mp_ioapics[idx].mpc_type = MP_IOAPIC; - mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mpc_apicaddr = address; - - set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); -#ifdef CONFIG_X86_32 - mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); -#else - mp_ioapics[idx].mpc_apicver = 0; -#endif - /* - * Build basic GSI lookup table to facilitate gsi->io_apic lookups - * and to prevent reprogramming of IOAPIC pins (PCI GSIs). - */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; - mp_ioapic_routing[idx].gsi_base = gsi_base; - mp_ioapic_routing[idx].gsi_end = gsi_base + - io_apic_get_redir_entries(idx); - - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, - mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); - - nr_ioapics++; -} - -void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) -{ - struct mpc_config_intsrc intsrc; - int ioapic = -1; - int pin = -1; - - /* - * Convert 'gsi' to 'ioapic.pin'. - */ - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) - return; - pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - - /* - * TBD: This check is for faulty timer entries, where the override - * erroneously sets the trigger to level, resulting in a HUGE - * increase of timer interrupts! - */ - if ((bus_irq == 0) && (trigger == 3)) - trigger = 1; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_irqflag = (trigger << 2) | polarity; - intsrc.mpc_srcbus = MP_ISA_BUS; - intsrc.mpc_srcbusirq = bus_irq; /* IRQ */ - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ - intsrc.mpc_dstirq = pin; /* INTIN# */ - - MP_intsrc_info(&intsrc); -} - -void __init mp_config_acpi_legacy_irqs(void) -{ - struct mpc_config_intsrc intsrc; - int i = 0; - int ioapic = -1; - -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) - /* - * Fabricate the legacy ISA bus (bus #31). - */ - mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA; -#endif - set_bit(MP_ISA_BUS, mp_bus_not_pci); - Dprintk("Bus #%d is ISA\n", MP_ISA_BUS); - -#if defined(CONFIG_X86_ES7000) || defined(CONFIG_X86_GENERICARCH) - /* - * Older generations of ES7000 have no legacy identity mappings - */ - if (es7000_plat == 1) - return; -#endif - - /* - * Locate the IOAPIC that manages the ISA IRQs (0-15). - */ - ioapic = mp_find_ioapic(0); - if (ioapic < 0) - return; - - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqflag = 0; /* Conforming */ - intsrc.mpc_srcbus = MP_ISA_BUS; -#ifdef CONFIG_X86_IO_APIC - intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; -#endif - /* - * Use the default configuration for the IRQs 0-15. Unless - * overridden by (MADT) interrupt source override entries. - */ - for (i = 0; i < 16; i++) { - int idx; - - for (idx = 0; idx < mp_irq_entries; idx++) { - struct mpc_config_intsrc *irq = mp_irqs + idx; - - /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mpc_srcbus == MP_ISA_BUS - && irq->mpc_srcbusirq == i) - break; - - /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mpc_dstapic == intsrc.mpc_dstapic) && - (irq->mpc_dstirq == i)) - break; - } - - if (idx != mp_irq_entries) { - printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i); - continue; /* IRQ already used */ - } - - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_srcbusirq = i; /* Identity mapped */ - intsrc.mpc_dstirq = i; - - MP_intsrc_info(&intsrc); - } -} - -int mp_register_gsi(u32 gsi, int triggering, int polarity) -{ - int ioapic; - int ioapic_pin; -#ifdef CONFIG_X86_32 -#define MAX_GSI_NUM 4096 -#define IRQ_COMPRESSION_START 64 - - static int pci_irq = IRQ_COMPRESSION_START; - /* - * Mapping between Global System Interrupts, which - * represent all possible interrupts, and IRQs - * assigned to actual devices. - */ - static int gsi_to_irq[MAX_GSI_NUM]; -#else - - if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) - return gsi; -#endif - - /* Don't set up the ACPI SCI because it's already set up */ - if (acpi_gbl_FADT.sci_interrupt == gsi) - return gsi; - - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) { - printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); - return gsi; - } - - ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base; - -#ifdef CONFIG_X86_32 - if (ioapic_renumber_irq) - gsi = ioapic_renumber_irq(ioapic, gsi); -#endif - - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ - if (ioapic_pin > MP_MAX_IOAPIC_PIN) { - printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, - ioapic_pin); - return gsi; - } - if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { - Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n", - mp_ioapic_routing[ioapic].apic_id, ioapic_pin); -#ifdef CONFIG_X86_32 - return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); -#else - return gsi; -#endif - } - - set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); -#ifdef CONFIG_X86_32 - /* - * For GSI >= 64, use IRQ compression - */ - if ((gsi >= IRQ_COMPRESSION_START) - && (triggering == ACPI_LEVEL_SENSITIVE)) { - /* - * For PCI devices assign IRQs in order, avoiding gaps - * due to unused I/O APIC pins. - */ - int irq = gsi; - if (gsi < MAX_GSI_NUM) { - /* - * Retain the VIA chipset work-around (gsi > 15), but - * avoid a problem where the 8254 timer (IRQ0) is setup - * via an override (so it's not on pin 0 of the ioapic), - * and at the same time, the pin 0 interrupt is a PCI - * type. The gsi > 15 test could cause these two pins - * to be shared as IRQ0, and they are not shareable. - * So test for this condition, and if necessary, avoid - * the pin collision. - */ - gsi = pci_irq++; - /* - * Don't assign IRQ used by ACPI SCI - */ - if (gsi == acpi_gbl_FADT.sci_interrupt) - gsi = pci_irq++; - gsi_to_irq[irq] = gsi; - } else { - printk(KERN_ERR "GSI %u is too high\n", gsi); - return gsi; - } - } -#endif - io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, - triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - return gsi; -} - -#endif /* CONFIG_X86_IO_APIC */ -#endif /* CONFIG_ACPI */ -- cgit v1.2.3 From 5f8951487ddbacbc949e9ffae574f94791f9b4dd Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:03:04 +0400 Subject: x86: make mp_ioapic_routing definition local Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 7 ++++++- include/asm-x86/io_apic.h | 7 ------- 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index b2ad09c4c6ae..f75c2030f4b5 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -852,7 +852,12 @@ static int __init acpi_parse_madt_lapic_entries(void) extern int es7000_plat; #endif -static struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS]; +static struct { + int apic_id; + int gsi_base; + int gsi_end; + DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); +} mp_ioapic_routing[MAX_IO_APICS]; static int mp_find_ioapic(int gsi) { diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h index d593e14f0341..2ef96f0596e2 100644 --- a/include/asm-x86/io_apic.h +++ b/include/asm-x86/io_apic.h @@ -112,13 +112,6 @@ extern int nr_ioapic_registers[MAX_IO_APICS]; #define MP_MAX_IOAPIC_PIN 127 -struct mp_ioapic_routing { - int apic_id; - int gsi_base; - int gsi_end; - DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); -}; - /* I/O APIC entries */ extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; -- cgit v1.2.3 From ec2cd0a22e2715f776a934e01c4f8ea098324fe1 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:03:10 +0400 Subject: x86: make struct config_ioapic not MPspec specific Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 28 ++++++++++++------------ arch/x86/kernel/apic_32.c | 2 +- arch/x86/kernel/io_apic_32.c | 52 ++++++++++++++++++++++---------------------- arch/x86/kernel/io_apic_64.c | 26 +++++++++++----------- arch/x86/kernel/mpparse.c | 8 +++++-- include/asm-x86/io_apic.h | 10 ++++++++- 6 files changed, 69 insertions(+), 57 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index f75c2030f4b5..a26dd91faf0f 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -887,8 +887,8 @@ static u8 __init uniq_ioapic_id(u8 id) DECLARE_BITMAP(used, 256); bitmap_zero(used, 256); for (i = 0; i < nr_ioapics; i++) { - struct mpc_config_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->mpc_apicid, used); + struct mp_config_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->mp_apicid, used); } if (!test_bit(id, used)) return id; @@ -920,29 +920,29 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) idx = nr_ioapics; - mp_ioapics[idx].mpc_type = MP_IOAPIC; - mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mpc_apicaddr = address; + mp_ioapics[idx].mp_type = MP_IOAPIC; + mp_ioapics[idx].mp_flags = MPC_APIC_USABLE; + mp_ioapics[idx].mp_apicaddr = address; set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id); + mp_ioapics[idx].mp_apicid = uniq_ioapic_id(id); #ifdef CONFIG_X86_32 - mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx); + mp_ioapics[idx].mp_apicver = io_apic_get_version(idx); #else - mp_ioapics[idx].mpc_apicver = 0; + mp_ioapics[idx].mp_apicver = 0; #endif /* * Build basic GSI lookup table to facilitate gsi->io_apic lookups * and to prevent reprogramming of IOAPIC pins (PCI GSIs). */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid; + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mp_apicid; mp_ioapic_routing[idx].gsi_base = gsi_base; mp_ioapic_routing[idx].gsi_end = gsi_base + io_apic_get_redir_entries(idx); - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, - mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr, + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, " + "GSI %d-%d\n", idx, mp_ioapics[idx].mp_apicid, + mp_ioapics[idx].mp_apicver, mp_ioapics[idx].mp_apicaddr, mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); nr_ioapics++; @@ -975,7 +975,7 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; mp_irqs[mp_irq_entries].mpc_srcbusirq = bus_irq; /* IRQ */ mp_irqs[mp_irq_entries].mpc_dstapic = - mp_ioapics[ioapic].mpc_apicid; /* APIC ID */ + mp_ioapics[ioapic].mp_apicid; /* APIC ID */ mp_irqs[mp_irq_entries].mpc_dstirq = pin; /* INTIN# */ if (++mp_irq_entries == MAX_IRQ_SOURCES) @@ -1016,7 +1016,7 @@ void __init mp_config_acpi_legacy_irqs(void) mp_irqs[mp_irq_entries].mpc_irqflag = 0; /* Conforming */ mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; #ifdef CONFIG_X86_IO_APIC - mp_irqs[mp_irq_entries].mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; + mp_irqs[mp_irq_entries].mpc_dstapic = mp_ioapics[ioapic].mp_apicid; #endif /* * Use the default configuration for the IRQs 0-15. Unless diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6c..fa1be1d62916 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -1202,7 +1202,7 @@ void __init init_apic_mappings(void) for (i = 0; i < nr_ioapics; i++) { if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mpc_apicaddr; + ioapic_phys = mp_ioapics[i].mp_apicaddr; if (!ioapic_phys) { printk(KERN_ERR "WARNING: bogus zero IO-APIC " diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index a40d54fc1fdd..5af1b717236c 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -72,7 +72,7 @@ int sis_apic_bug = -1; int nr_ioapic_registers[MAX_IO_APICS]; /* I/O APIC entries */ -struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; +struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ @@ -110,7 +110,7 @@ struct io_apic { static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) { return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) - + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); + + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK); } static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) @@ -802,7 +802,7 @@ static int find_irq_entry(int apic, int pin, int type) for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || + (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mp_apicid || mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && mp_irqs[i].mpc_dstirq == pin) return i; @@ -844,7 +844,7 @@ static int __init find_isa_irq_apic(int irq, int type) if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic) return apic; } } @@ -872,7 +872,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) int lbus = mp_irqs[i].mpc_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic || mp_irqs[i].mpc_dstapic == MP_APIC_ALL) break; @@ -1250,12 +1250,12 @@ static void __init setup_IO_APIC_irqs(void) if (first_notcon) { apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", - mp_ioapics[apic].mpc_apicid, + mp_ioapics[apic].mp_apicid, pin); first_notcon = 0; } else apic_printk(APIC_VERBOSE, ", %d-%d", - mp_ioapics[apic].mpc_apicid, pin); + mp_ioapics[apic].mp_apicid, pin); continue; } @@ -1357,7 +1357,7 @@ void __init print_IO_APIC(void) printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (i = 0; i < nr_ioapics; i++) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); + mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]); /* * We are a bit conservative about what we expect. We have to @@ -1376,7 +1376,7 @@ void __init print_IO_APIC(void) reg_03.raw = io_apic_read(apic, 3); spin_unlock_irqrestore(&ioapic_lock, flags); - printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); + printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid); printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); @@ -1749,14 +1749,14 @@ static void __init setup_ioapic_ids_from_mpc(void) reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - old_id = mp_ioapics[apic].mpc_apicid; + old_id = mp_ioapics[apic].mp_apicid; - if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { + if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", - apic, mp_ioapics[apic].mpc_apicid); + apic, mp_ioapics[apic].mp_apicid); printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", reg_00.bits.ID); - mp_ioapics[apic].mpc_apicid = reg_00.bits.ID; + mp_ioapics[apic].mp_apicid = reg_00.bits.ID; } /* @@ -1765,9 +1765,9 @@ static void __init setup_ioapic_ids_from_mpc(void) * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (check_apicid_used(phys_id_present_map, - mp_ioapics[apic].mpc_apicid)) { + mp_ioapics[apic].mp_apicid)) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", - apic, mp_ioapics[apic].mpc_apicid); + apic, mp_ioapics[apic].mp_apicid); for (i = 0; i < get_physical_broadcast(); i++) if (!physid_isset(i, phys_id_present_map)) break; @@ -1776,13 +1776,13 @@ static void __init setup_ioapic_ids_from_mpc(void) printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", i); physid_set(i, phys_id_present_map); - mp_ioapics[apic].mpc_apicid = i; + mp_ioapics[apic].mp_apicid = i; } else { physid_mask_t tmp; - tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid); + tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid); apic_printk(APIC_VERBOSE, "Setting %d in the " "phys_id_present_map\n", - mp_ioapics[apic].mpc_apicid); + mp_ioapics[apic].mp_apicid); physids_or(phys_id_present_map, phys_id_present_map, tmp); } @@ -1791,11 +1791,11 @@ static void __init setup_ioapic_ids_from_mpc(void) * We need to adjust the IRQ routing table * if the ID changed. */ - if (old_id != mp_ioapics[apic].mpc_apicid) + if (old_id != mp_ioapics[apic].mp_apicid) for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].mpc_dstapic == old_id) mp_irqs[i].mpc_dstapic - = mp_ioapics[apic].mpc_apicid; + = mp_ioapics[apic].mp_apicid; /* * Read the right value from the MPC table and @@ -1803,9 +1803,9 @@ static void __init setup_ioapic_ids_from_mpc(void) */ apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", - mp_ioapics[apic].mpc_apicid); + mp_ioapics[apic].mp_apicid); - reg_00.bits.ID = mp_ioapics[apic].mpc_apicid; + reg_00.bits.ID = mp_ioapics[apic].mp_apicid; spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0, reg_00.raw); spin_unlock_irqrestore(&ioapic_lock, flags); @@ -1816,7 +1816,7 @@ static void __init setup_ioapic_ids_from_mpc(void) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid) + if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid) printk("could not set ID!\n"); else apic_printk(APIC_VERBOSE, " ok.\n"); @@ -2355,8 +2355,8 @@ static int ioapic_resume(struct sys_device *dev) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(dev->id, 0); - if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { - reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; + if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) { + reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid; io_apic_write(dev->id, 0, reg_00.raw); } spin_unlock_irqrestore(&ioapic_lock, flags); @@ -2789,7 +2789,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry " "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic, - mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq, + mp_ioapics[ioapic].mp_apicid, pin, entry.vector, irq, edge_level, active_high_low); ioapic_register_intr(irq, entry.vector, edge_level); diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index ef1a8dfcc529..4555ad8c2070 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -104,7 +104,7 @@ DEFINE_SPINLOCK(vector_lock); int nr_ioapic_registers[MAX_IO_APICS]; /* I/O APIC entries */ -struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; +struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ @@ -140,7 +140,7 @@ struct io_apic { static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) { return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) - + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); + + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK); } static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) @@ -454,7 +454,7 @@ static int find_irq_entry(int apic, int pin, int type) for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || + (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mp_apicid || mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && mp_irqs[i].mpc_dstirq == pin) return i; @@ -496,7 +496,7 @@ static int __init find_isa_irq_apic(int irq, int type) if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic) return apic; } } @@ -524,7 +524,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) int lbus = mp_irqs[i].mpc_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic || mp_irqs[i].mpc_dstapic == MP_APIC_ALL) break; @@ -846,7 +846,7 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> " "IRQ %d Mode:%i Active:%i)\n", - apic, mp_ioapics[apic].mpc_apicid, pin, cfg->vector, + apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector, irq, trigger, polarity); /* @@ -887,10 +887,10 @@ static void __init setup_IO_APIC_irqs(void) idx = find_irq_entry(apic,pin,mp_INT); if (idx == -1) { if (first_notcon) { - apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin); + apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mp_apicid, pin); first_notcon = 0; } else - apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin); + apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mp_apicid, pin); continue; } if (!first_notcon) { @@ -965,7 +965,7 @@ void __apicdebuginit print_IO_APIC(void) printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (i = 0; i < nr_ioapics; i++) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); + mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]); /* * We are a bit conservative about what we expect. We have to @@ -983,7 +983,7 @@ void __apicdebuginit print_IO_APIC(void) spin_unlock_irqrestore(&ioapic_lock, flags); printk("\n"); - printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); + printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid); printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); @@ -1841,8 +1841,8 @@ static int ioapic_resume(struct sys_device *dev) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(dev->id, 0); - if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { - reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; + if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) { + reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid; io_apic_write(dev->id, 0, reg_00.raw); } spin_unlock_irqrestore(&ioapic_lock, flags); @@ -2336,7 +2336,7 @@ void __init ioapic_init_mappings(void) ioapic_res = ioapic_setup_resources(); for (i = 0; i < nr_ioapics; i++) { if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mpc_apicaddr; + ioapic_phys = mp_ioapics[i].mp_apicaddr; } else { ioapic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index d05b70c329c4..9f1e5bf7f0fb 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -176,7 +176,11 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m) if (bad_ioapic(m->mpc_apicaddr)) return; - mp_ioapics[nr_ioapics] = *m; + mp_ioapics[nr_ioapics].mp_apicaddr = m->mpc_apicaddr; + mp_ioapics[nr_ioapics].mp_apicid = m->mpc_apicid; + mp_ioapics[nr_ioapics].mp_type = m->mpc_type; + mp_ioapics[nr_ioapics].mp_apicver = m->mpc_apicver; + mp_ioapics[nr_ioapics].mp_flags = m->mpc_flags; nr_ioapics++; } @@ -426,7 +430,7 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type) intsrc.mpc_type = MP_INTSRC; intsrc.mpc_irqflag = 0; /* conforming */ intsrc.mpc_srcbus = 0; - intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid; + intsrc.mpc_dstapic = mp_ioapics[0].mp_apicid; intsrc.mpc_irqtype = mp_INT; diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h index 2ef96f0596e2..ade76c0d03ae 100644 --- a/include/asm-x86/io_apic.h +++ b/include/asm-x86/io_apic.h @@ -112,8 +112,16 @@ extern int nr_ioapic_registers[MAX_IO_APICS]; #define MP_MAX_IOAPIC_PIN 127 +struct mp_config_ioapic { + unsigned long mp_apicaddr; + unsigned int mp_apicid; + unsigned char mp_type; + unsigned char mp_apicver; + unsigned char mp_flags; +}; + /* I/O APIC entries */ -extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS]; +extern struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; /* # of MP IRQ source entries */ extern int mp_irq_entries; -- cgit v1.2.3 From 2fddb6e28e903a3ab1704cc5aac01be5a59dc05b Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Wed, 14 May 2008 19:03:17 +0400 Subject: x86: make config_irqsrc not MPspec specific Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 43 +++++++++++++++-------------- arch/x86/kernel/io_apic_32.c | 64 ++++++++++++++++++++++---------------------- arch/x86/kernel/io_apic_64.c | 58 +++++++++++++++++++-------------------- arch/x86/kernel/mpparse.c | 8 +++++- include/asm-x86/io_apic.h | 12 ++++++++- 5 files changed, 100 insertions(+), 85 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index a26dd91faf0f..276ec058f683 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -969,14 +969,14 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) if ((bus_irq == 0) && (trigger == 3)) trigger = 1; - mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; - mp_irqs[mp_irq_entries].mpc_irqflag = (trigger << 2) | polarity; - mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; - mp_irqs[mp_irq_entries].mpc_srcbusirq = bus_irq; /* IRQ */ - mp_irqs[mp_irq_entries].mpc_dstapic = + mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mp_irqflag = (trigger << 2) | polarity; + mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mp_srcbusirq = bus_irq; /* IRQ */ + mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; /* APIC ID */ - mp_irqs[mp_irq_entries].mpc_dstirq = pin; /* INTIN# */ + mp_irqs[mp_irq_entries].mp_dstirq = pin; /* INTIN# */ if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); @@ -1012,12 +1012,11 @@ void __init mp_config_acpi_legacy_irqs(void) if (ioapic < 0) return; - mp_irqs[mp_irq_entries].mpc_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mpc_irqflag = 0; /* Conforming */ - mp_irqs[mp_irq_entries].mpc_srcbus = MP_ISA_BUS; -#ifdef CONFIG_X86_IO_APIC - mp_irqs[mp_irq_entries].mpc_dstapic = mp_ioapics[ioapic].mp_apicid; -#endif + mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; + /* * Use the default configuration for the IRQs 0-15. Unless * overridden by (MADT) interrupt source override entries. @@ -1026,17 +1025,17 @@ void __init mp_config_acpi_legacy_irqs(void) int idx; for (idx = 0; idx < mp_irq_entries; idx++) { - struct mpc_config_intsrc *irq = mp_irqs + idx; + struct mp_config_intsrc *irq = mp_irqs + idx; /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mpc_srcbus == MP_ISA_BUS - && irq->mpc_srcbusirq == i) + if (irq->mp_srcbus == MP_ISA_BUS + && irq->mp_srcbusirq == i) break; /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mpc_dstapic == - mp_irqs[mp_irq_entries].mpc_dstapic) && - (irq->mpc_dstirq == i)) + if ((irq->mp_dstapic == + mp_irqs[mp_irq_entries].mp_dstapic) && + (irq->mp_dstirq == i)) break; } @@ -1045,9 +1044,9 @@ void __init mp_config_acpi_legacy_irqs(void) continue; /* IRQ already used */ } - mp_irqs[mp_irq_entries].mpc_irqtype = mp_INT; - mp_irqs[mp_irq_entries].mpc_srcbusirq = i; /* Identity mapped */ - mp_irqs[mp_irq_entries].mpc_dstirq = i; + mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; + mp_irqs[mp_irq_entries].mp_srcbusirq = i; /* Identity mapped */ + mp_irqs[mp_irq_entries].mp_dstirq = i; if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 5af1b717236c..ea68c3e5ba1d 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -76,7 +76,7 @@ struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ -struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; +struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; @@ -801,10 +801,10 @@ static int find_irq_entry(int apic, int pin, int type) int i; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mp_apicid || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && - mp_irqs[i].mpc_dstirq == pin) + if (mp_irqs[i].mp_irqtype == type && + (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) && + mp_irqs[i].mp_dstirq == pin) return i; return -1; @@ -818,13 +818,13 @@ static int __init find_isa_irq_pin(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) - return mp_irqs[i].mpc_dstirq; + return mp_irqs[i].mp_dstirq; } return -1; } @@ -834,17 +834,17 @@ static int __init find_isa_irq_apic(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) break; } if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic) return apic; } } @@ -869,23 +869,23 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) return -1; } for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) break; if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].mpc_irqtype && + !mp_irqs[i].mp_irqtype && (bus == lbus) && - (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq); if (!(apic || IO_APIC_IRQ(irq))) continue; - if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) + if (pin == (mp_irqs[i].mp_srcbusirq & 3)) return irq; /* * Use the first all-but-pin matching entry as a @@ -952,7 +952,7 @@ static int EISA_ELCR(unsigned int irq) * EISA conforming in the MP table, that means its trigger type must * be read in from the ELCR */ -#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq)) +#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mp_srcbusirq)) #define default_EISA_polarity(idx) default_ISA_polarity(idx) /* PCI interrupts are always polarity one level triggered, @@ -969,13 +969,13 @@ static int EISA_ELCR(unsigned int irq) static int MPBIOS_polarity(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int polarity; /* * Determine IRQ line polarity (high active or low active): */ - switch (mp_irqs[idx].mpc_irqflag & 3) + switch (mp_irqs[idx].mp_irqflag & 3) { case 0: /* conforms, ie. bus-type dependent polarity */ { @@ -1012,13 +1012,13 @@ static int MPBIOS_polarity(int idx) static int MPBIOS_trigger(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int trigger; /* * Determine IRQ trigger mode (edge or level sensitive): */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + switch ((mp_irqs[idx].mp_irqflag>>2) & 3) { case 0: /* conforms, ie. bus-type dependent */ { @@ -1097,16 +1097,16 @@ static inline int irq_trigger(int idx) static int pin_2_irq(int idx, int apic, int pin) { int irq, i; - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; /* * Debugging check, we are in big trouble if this message pops up! */ - if (mp_irqs[idx].mpc_dstirq != pin) + if (mp_irqs[idx].mp_dstirq != pin) printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); if (test_bit(bus, mp_bus_not_pci)) - irq = mp_irqs[idx].mpc_srcbusirq; + irq = mp_irqs[idx].mp_srcbusirq; else { /* * PCI IRQs are mapped in order @@ -1793,8 +1793,8 @@ static void __init setup_ioapic_ids_from_mpc(void) */ if (old_id != mp_ioapics[apic].mp_apicid) for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_dstapic == old_id) - mp_irqs[i].mpc_dstapic + if (mp_irqs[i].mp_dstapic == old_id) + mp_irqs[i].mp_dstapic = mp_ioapics[apic].mp_apicid; /* @@ -2810,8 +2810,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) return -1; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == mp_INT && - mp_irqs[i].mpc_srcbusirq == bus_irq) + if (mp_irqs[i].mp_irqtype == mp_INT && + mp_irqs[i].mp_srcbusirq == bus_irq) break; if (i >= mp_irq_entries) return -1; diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 4555ad8c2070..e7f1476ed537 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -108,7 +108,7 @@ struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ -struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; +struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; @@ -453,10 +453,10 @@ static int find_irq_entry(int apic, int pin, int type) int i; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mp_apicid || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && - mp_irqs[i].mpc_dstirq == pin) + if (mp_irqs[i].mp_irqtype == type && + (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) && + mp_irqs[i].mp_dstirq == pin) return i; return -1; @@ -470,13 +470,13 @@ static int __init find_isa_irq_pin(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) - return mp_irqs[i].mpc_dstirq; + return mp_irqs[i].mp_dstirq; } return -1; } @@ -486,17 +486,17 @@ static int __init find_isa_irq_apic(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) + (mp_irqs[i].mp_irqtype == type) && + (mp_irqs[i].mp_srcbusirq == irq)) break; } if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic) return apic; } } @@ -521,23 +521,23 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) return -1; } for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; + int lbus = mp_irqs[i].mp_srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mpc_dstapic || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) + if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic || + mp_irqs[i].mp_dstapic == MP_APIC_ALL) break; if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].mpc_irqtype && + !mp_irqs[i].mp_irqtype && (bus == lbus) && - (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq); if (!(apic || IO_APIC_IRQ(irq))) continue; - if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) + if (pin == (mp_irqs[i].mp_srcbusirq & 3)) return irq; /* * Use the first all-but-pin matching entry as a @@ -565,13 +565,13 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) static int MPBIOS_polarity(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int polarity; /* * Determine IRQ line polarity (high active or low active): */ - switch (mp_irqs[idx].mpc_irqflag & 3) + switch (mp_irqs[idx].mp_irqflag & 3) { case 0: /* conforms, ie. bus-type dependent polarity */ if (test_bit(bus, mp_bus_not_pci)) @@ -607,13 +607,13 @@ static int MPBIOS_polarity(int idx) static int MPBIOS_trigger(int idx) { - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; int trigger; /* * Determine IRQ trigger mode (edge or level sensitive): */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + switch ((mp_irqs[idx].mp_irqflag>>2) & 3) { case 0: /* conforms, ie. bus-type dependent */ if (test_bit(bus, mp_bus_not_pci)) @@ -660,16 +660,16 @@ static inline int irq_trigger(int idx) static int pin_2_irq(int idx, int apic, int pin) { int irq, i; - int bus = mp_irqs[idx].mpc_srcbus; + int bus = mp_irqs[idx].mp_srcbus; /* * Debugging check, we are in big trouble if this message pops up! */ - if (mp_irqs[idx].mpc_dstirq != pin) + if (mp_irqs[idx].mp_dstirq != pin) printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); if (test_bit(bus, mp_bus_not_pci)) { - irq = mp_irqs[idx].mpc_srcbusirq; + irq = mp_irqs[idx].mp_srcbusirq; } else { /* * PCI IRQs are mapped in order @@ -2242,8 +2242,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) return -1; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == mp_INT && - mp_irqs[i].mpc_srcbusirq == bus_irq) + if (mp_irqs[i].mp_irqtype == mp_INT && + mp_irqs[i].mp_srcbusirq == bus_irq) break; if (i >= mp_irq_entries) return -1; diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 9f1e5bf7f0fb..59f051db236d 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -186,12 +186,18 @@ static void __init MP_ioapic_info(struct mpc_config_ioapic *m) static void __init MP_intsrc_info(struct mpc_config_intsrc *m) { - mp_irqs[mp_irq_entries] = *m; printk(KERN_INFO "Int: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC INT %02x\n", m->mpc_irqtype, m->mpc_irqflag & 3, (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus, m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq); + mp_irqs[mp_irq_entries].mp_dstapic = m->mpc_dstapic; + mp_irqs[mp_irq_entries].mp_type = m->mpc_type; + mp_irqs[mp_irq_entries].mp_irqtype = m->mpc_irqtype; + mp_irqs[mp_irq_entries].mp_irqflag = m->mpc_irqflag; + mp_irqs[mp_irq_entries].mp_srcbus = m->mpc_srcbus; + mp_irqs[mp_irq_entries].mp_srcbusirq = m->mpc_srcbusirq; + mp_irqs[mp_irq_entries].mp_dstirq = m->mpc_dstirq; if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); } diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h index ade76c0d03ae..86d8c3bdcca4 100644 --- a/include/asm-x86/io_apic.h +++ b/include/asm-x86/io_apic.h @@ -120,6 +120,16 @@ struct mp_config_ioapic { unsigned char mp_flags; }; +struct mp_config_intsrc { + unsigned int mp_dstapic; + unsigned char mp_type; + unsigned char mp_irqtype; + unsigned short mp_irqflag; + unsigned char mp_srcbus; + unsigned char mp_srcbusirq; + unsigned char mp_dstirq; +}; + /* I/O APIC entries */ extern struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; @@ -127,7 +137,7 @@ extern struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; extern int mp_irq_entries; /* MP IRQ source entries */ -extern struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; +extern struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* non-0 if default (table-less) MP configuration */ extern int mpc_default_type; -- cgit v1.2.3 From 59f4519ad7ade61123e90085b0dadb2ea197bd87 Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Sun, 18 May 2008 05:24:41 +0200 Subject: x86: initialize all fields of mp_irqs[mp_irq_entries] Commit "x86: make config_irqsrc not MPspec specific" introduced some uses of uninitialized fields in mp_config_acpi_legacy_irqs(). I need the following patch to get sched-devel/master to boot. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/acpi/boot.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 276ec058f683..6170c6aeaf79 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1012,11 +1012,6 @@ void __init mp_config_acpi_legacy_irqs(void) if (ioapic < 0) return; - mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ - mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; - mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; - /* * Use the default configuration for the IRQs 0-15. Unless * overridden by (MADT) interrupt source override entries. @@ -1044,6 +1039,10 @@ void __init mp_config_acpi_legacy_irqs(void) continue; /* IRQ already used */ } + mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; mp_irqs[mp_irq_entries].mp_srcbusirq = i; /* Identity mapped */ mp_irqs[mp_irq_entries].mp_dstirq = i; -- cgit v1.2.3 From aafbdf71f1d3aeffd679b1a86e1b28f71515856c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Thu, 22 May 2008 12:26:15 +0400 Subject: x86: fix mpparse/acpi interaction Sitsofe Wheeler reported boot problems on linux-next. It looks like the same issue as found by Soeren Sandman in 7575217f656a93, "x86: initialize all fields of mp_irqs[mp_irq_entries]". But his fix is also not complete, as dstapic is used before it assigned. Reported-by: Sitsofe Wheeler Bisected-by: Sitsofe Wheeler Signed-off-by: Alexey Starikovskiy Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/acpi/boot.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 6170c6aeaf79..2ddfabae382b 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1019,6 +1019,11 @@ void __init mp_config_acpi_legacy_irqs(void) for (i = 0; i < 16; i++) { int idx; + mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; + for (idx = 0; idx < mp_irq_entries; idx++) { struct mp_config_intsrc *irq = mp_irqs + idx; @@ -1039,10 +1044,6 @@ void __init mp_config_acpi_legacy_irqs(void) continue; /* IRQ already used */ } - mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ - mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; - mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; mp_irqs[mp_irq_entries].mp_srcbusirq = i; /* Identity mapped */ mp_irqs[mp_irq_entries].mp_dstirq = i; -- cgit v1.2.3 From bf62f3981c7076714e3b9f5fa6989a806cad02bf Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 20 May 2008 20:10:58 -0700 Subject: x86: move e820_mark_nosave_regions to e820.c and make e820_mark_nosave_regions to take limit_pfn to use max_low_pfn for 32bit and end_pfn for 64bit Signed-off-by: Yinghai Lu Cc: Andrew Morton Signed-off-by: Thomas Gleixner --- arch/x86/kernel/e820.c | 32 ++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_32.c | 32 -------------------------------- arch/x86/kernel/e820_64.c | 32 -------------------------------- arch/x86/kernel/setup_32.c | 2 +- arch/x86/kernel/setup_64.c | 2 +- include/asm-x86/e820.h | 9 +++++++++ include/asm-x86/e820_32.h | 8 -------- include/asm-x86/e820_64.h | 1 - 8 files changed, 43 insertions(+), 75 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 35da8cdbe5e6..0cd9132c9450 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -495,6 +496,37 @@ __init void e820_setup_gap(void) pci_mem_start, gapstart, gapsize); } +#if defined(CONFIG_X86_64) || \ + (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION)) +/** + * Find the ranges of physical addresses that do not correspond to + * e820 RAM areas and mark the corresponding pages as nosave for + * hibernation (32 bit) or software suspend and suspend to RAM (64 bit). + * + * This function requires the e820 map to be sorted and without any + * overlapping entries and assumes the first e820 area to be RAM. + */ +void __init e820_mark_nosave_regions(unsigned long limit_pfn) +{ + int i; + unsigned long pfn; + + pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size); + for (i = 1; i < e820.nr_map; i++) { + struct e820entry *ei = &e820.map[i]; + + if (pfn < PFN_UP(ei->addr)) + register_nosave_region(pfn, PFN_UP(ei->addr)); + + pfn = PFN_DOWN(ei->addr + ei->size); + if (ei->type != E820_RAM) + register_nosave_region(PFN_UP(ei->addr), pfn); + + if (pfn >= limit_pfn) + break; + } +} +#endif /* * Early reserved memory areas. diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index dfe25751038b..db760d4706af 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -9,7 +9,6 @@ #include #include #include -#include #include #include @@ -208,37 +207,6 @@ void __init init_iomem_resources(struct resource *code_resource, } } -#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION) -/** - * e820_mark_nosave_regions - Find the ranges of physical addresses that do not - * correspond to e820 RAM areas and mark the corresponding pages as nosave for - * hibernation. - * - * This function requires the e820 map to be sorted and without any - * overlapping entries and assumes the first e820 area to be RAM. - */ -void __init e820_mark_nosave_regions(void) -{ - int i; - unsigned long pfn; - - pfn = PFN_DOWN(e820.map[0].addr + e820.map[0].size); - for (i = 1; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (pfn < PFN_UP(ei->addr)) - register_nosave_region(pfn, PFN_UP(ei->addr)); - - pfn = PFN_DOWN(ei->addr + ei->size); - if (ei->type != E820_RAM) - register_nosave_region(PFN_UP(ei->addr), pfn); - - if (pfn >= max_low_pfn) - break; - } -} -#endif - /* * Find the highest page frame number we have available */ diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 3b2e0b1bb49b..5e063e72b24a 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include @@ -93,37 +92,6 @@ void __init e820_reserve_resources(void) } } -/* - * Find the ranges of physical addresses that do not correspond to - * e820 RAM areas and mark the corresponding pages as nosave for software - * suspend and suspend to RAM. - * - * This function requires the e820 map to be sorted and without any - * overlapping entries and assumes the first e820 area to be RAM. - */ -void __init e820_mark_nosave_regions(void) -{ - int i; - unsigned long paddr; - - paddr = round_down(e820.map[0].addr + e820.map[0].size, PAGE_SIZE); - for (i = 1; i < e820.nr_map; i++) { - struct e820entry *ei = &e820.map[i]; - - if (paddr < ei->addr) - register_nosave_region(PFN_DOWN(paddr), - PFN_UP(ei->addr)); - - paddr = round_down(ei->addr + ei->size, PAGE_SIZE); - if (ei->type != E820_RAM) - register_nosave_region(PFN_UP(ei->addr), - PFN_DOWN(paddr)); - - if (paddr >= (end_pfn << PAGE_SHIFT)) - break; - } -} - /* * Finds an active region in the address range from start_pfn to last_pfn and * returns its range in ei_startpfn and ei_endpfn for the e820 entry. diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 3c451d143eba..e1173aecf69a 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -820,7 +820,7 @@ void __init setup_arch(char **cmdline_p) #endif e820_setup_gap(); - e820_mark_nosave_regions(); + e820_mark_nosave_regions(max_low_pfn); #ifdef CONFIG_VT #if defined(CONFIG_VGA_CONSOLE) diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff1286ad8a..975a5da46e49 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -516,7 +516,7 @@ void __init setup_arch(char **cmdline_p) * We trust e820 completely. No explicit ROM probing in memory. */ e820_reserve_resources(); - e820_mark_nosave_regions(); + e820_mark_nosave_regions(end_pfn); /* request I/O space for devices used on all i[345]86 PCs */ for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 5a58e2bb1d78..4266a2c5f2e8 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -70,6 +70,15 @@ extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, extern void update_e820(void); extern void e820_setup_gap(void); +#if defined(CONFIG_X86_64) || \ + (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION)) +extern void e820_mark_nosave_regions(unsigned long limit_pfn); +#else +static inline void e820_mark_nosave_regions(unsigned long limit_pfn) +{ +} +#endif + extern u64 find_e820_area(u64 start, u64 end, u64 size, u64 align); extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align); extern void reserve_early(u64 start, u64 end, char *name); diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h index 9576b438fbd9..7ace82570a36 100644 --- a/include/asm-x86/e820_32.h +++ b/include/asm-x86/e820_32.h @@ -28,13 +28,5 @@ extern void init_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); -#if defined(CONFIG_PM) && defined(CONFIG_HIBERNATION) -extern void e820_mark_nosave_regions(void); -#else -static inline void e820_mark_nosave_regions(void) -{ -} -#endif - #endif/*!__ASSEMBLY__*/ #endif/*__E820_HEADER*/ diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h index 37f176a02bc6..917963ccab69 100644 --- a/include/asm-x86/e820_64.h +++ b/include/asm-x86/e820_64.h @@ -18,7 +18,6 @@ extern void setup_memory_region(void); extern void contig_e820_setup(void); extern unsigned long e820_end_of_ram(void); extern void e820_reserve_resources(void); -extern void e820_mark_nosave_regions(void); extern int e820_any_non_reserved(unsigned long start, unsigned long end); extern int is_memory_any_valid(unsigned long start, unsigned long end); extern int e820_all_non_reserved(unsigned long start, unsigned long end); -- cgit v1.2.3 From b3e2416465bc9140bfd209f247e6a789f68f0d19 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 23 May 2008 01:54:44 +0400 Subject: x86: Set pic_mode only if local apic code is present --- arch/x86/kernel/mpparse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 59f051db236d..e61523a13ecd 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -609,7 +609,7 @@ static void __init __get_smp_config(unsigned early) printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification); -#ifdef CONFIG_X86_32 +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32) if (mpf->mpf_feature2 & (1 << 7)) { printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); pic_mode = 1; -- cgit v1.2.3 From f3918352909f839a7b0dbf9b3f81d2e183c46f88 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 23 May 2008 01:54:51 +0400 Subject: x86: move pic_mode to apic_32.c --- arch/x86/kernel/apic_32.c | 2 ++ arch/x86/kernel/mpparse.c | 2 -- arch/x86/mach-visws/mpparse.c | 2 -- 3 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index fa1be1d62916..848c603457fe 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -76,6 +76,8 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); */ int apic_verbosity; +int pic_mode; + static unsigned int calibration_result; static int lapic_next_event(unsigned long delta, diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index e61523a13ecd..b72c04602ad2 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -48,8 +48,6 @@ int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 }; static int mp_current_pci_id; -int pic_mode; - /* * Intel MP BIOS table parsing routines: */ diff --git a/arch/x86/mach-visws/mpparse.c b/arch/x86/mach-visws/mpparse.c index 57484e91ab90..b7d063e7de1f 100644 --- a/arch/x86/mach-visws/mpparse.c +++ b/arch/x86/mach-visws/mpparse.c @@ -11,8 +11,6 @@ /* Have we found an MP table */ int smp_found_config; -int pic_mode; - extern unsigned int __cpuinitdata maxcpus; /* -- cgit v1.2.3 From bab4b27c00c4880737c18bb91138b1a7dd94164c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 19 May 2008 19:47:03 +0400 Subject: x86: move smp_found_config --- arch/x86/kernel/apic_32.c | 3 +++ arch/x86/kernel/apic_64.c | 3 +++ arch/x86/kernel/mpparse.c | 8 ++++---- arch/x86/mach-visws/mpparse.c | 5 ++--- arch/x86/mach-voyager/voyager_smp.c | 5 ----- 5 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 848c603457fe..c304759f0834 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -78,6 +78,9 @@ int apic_verbosity; int pic_mode; +/* Have we found an MP table */ +int smp_found_config; + static unsigned int calibration_result; static int lapic_next_event(unsigned long delta, diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 5910020c3f24..54087f920f2f 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -56,6 +56,9 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); */ int apic_verbosity; +/* Have we found an MP table */ +int smp_found_config; + static struct resource lapic_resource = { .name = "Local APIC", .flags = IORESOURCE_MEM | IORESOURCE_BUSY, diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index b72c04602ad2..d67cd7600a21 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -32,9 +32,6 @@ #include #endif -/* Have we found an MP table */ -int smp_found_config; - /* * Various Linux-internal data structures created from the * MP-table. @@ -639,7 +636,9 @@ static void __init __get_smp_config(unsigned early) * override the defaults. */ if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) { +#ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 0; +#endif printk(KERN_ERR "BIOS bug, MP table errors detected!...\n"); printk(KERN_ERR "... disabling SMP support. " @@ -706,8 +705,9 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, !mpf_checksum((unsigned char *)bp, 16) && ((mpf->mpf_specification == 1) || (mpf->mpf_specification == 4))) { - +#ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 1; +#endif mpf_found = mpf; #ifdef CONFIG_X86_32 printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n", diff --git a/arch/x86/mach-visws/mpparse.c b/arch/x86/mach-visws/mpparse.c index b7d063e7de1f..a2fb78c0d154 100644 --- a/arch/x86/mach-visws/mpparse.c +++ b/arch/x86/mach-visws/mpparse.c @@ -8,9 +8,6 @@ #include "cobalt.h" #include "mach_apic.h" -/* Have we found an MP table */ -int smp_found_config; - extern unsigned int __cpuinitdata maxcpus; /* @@ -74,7 +71,9 @@ void __init find_smp_config(void) if (ncpus > maxcpus) ncpus = maxcpus; +#ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 1; +#endif while (ncpus--) MP_processor_info(mp++); diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 7bbebbfe8c4e..8dedd01e909f 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -59,11 +59,6 @@ __u32 voyager_quad_processors = 0; * activity count. Finally exported by i386_ksyms.c */ static int voyager_extended_cpus = 1; -/* Have we found an SMP box - used by time.c to do the profiling - interrupt for timeslicing; do not set to 1 until the per CPU timer - interrupt is active */ -int smp_found_config = 0; - /* Used for the invalidate map that's also checked in the spinlock */ static volatile unsigned long smp_invalidate_needed; -- cgit v1.2.3 From ce6444d39fdea29dcf145d2d95fe9cdc850aa53c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 19 May 2008 19:47:09 +0400 Subject: x86: mp_bus_id_to_pci_bus is not needed --- arch/x86/kernel/io_apic_32.c | 2 +- arch/x86/kernel/io_apic_64.c | 2 +- arch/x86/kernel/mpparse.c | 10 ---------- include/asm-x86/mpspec.h | 2 -- 4 files changed, 2 insertions(+), 14 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index ea68c3e5ba1d..17b2e8f862d3 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -864,7 +864,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, " "slot:%d, pin:%d.\n", bus, slot, pin); - if (mp_bus_id_to_pci_bus[bus] == -1) { + if (test_bit(bus, mp_bus_not_pci)) { printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus); return -1; } diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index e7f1476ed537..9637675ea555 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -516,7 +516,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", bus, slot, pin); - if (mp_bus_id_to_pci_bus[bus] == -1) { + if (test_bit(bus, mp_bus_not_pci)) { apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus); return -1; } diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index d67cd7600a21..83dfd6696c2a 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -41,13 +41,6 @@ int mp_bus_id_to_type[MAX_MP_BUSSES]; #endif DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); -int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 }; - -static int mp_current_pci_id; - -/* - * Intel MP BIOS table parsing routines: - */ /* * Checksum an MP configuration block. @@ -101,7 +94,6 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m) static void __init MP_bus_info(struct mpc_config_bus *m) { char str[7]; - memcpy(str, m->mpc_bustype, 6); str[6] = 0; @@ -130,8 +122,6 @@ static void __init MP_bus_info(struct mpc_config_bus *m) mpc_oem_pci_bus(m, translation_table[mpc_record]); #endif clear_bit(m->mpc_busid, mp_bus_not_pci); - mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id; - mp_current_pci_id++; #if defined(CONFIG_EISA) || defined (CONFIG_MCA) mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI; } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) { diff --git a/include/asm-x86/mpspec.h b/include/asm-x86/mpspec.h index 57a991b9c053..b785ddd8d761 100644 --- a/include/asm-x86/mpspec.h +++ b/include/asm-x86/mpspec.h @@ -32,8 +32,6 @@ extern int mp_bus_id_to_type[MAX_MP_BUSSES]; extern DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); -extern int mp_bus_id_to_pci_bus[MAX_MP_BUSSES]; - extern unsigned int boot_cpu_physical_apicid; extern int smp_found_config; extern int mpc_default_type; -- cgit v1.2.3 From 8732fc4b237fca3bd3cb0ec87ca8fb90271b0baf Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Mon, 19 May 2008 19:47:16 +0400 Subject: x86: move mp_bus_not_pci from mpparse.c --- arch/x86/kernel/io_apic_32.c | 6 ++++++ arch/x86/kernel/io_apic_64.c | 2 ++ arch/x86/kernel/mpparse.c | 10 ---------- 3 files changed, 8 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 17b2e8f862d3..2285b81ad1d5 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -81,6 +81,12 @@ struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; +#if defined (CONFIG_MCA) || defined (CONFIG_EISA) +int mp_bus_id_to_type[MAX_MP_BUSSES]; +#endif + +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); + static int disable_timer_pin_1 __initdata; /* diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 9637675ea555..339cf6f926dc 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -113,6 +113,8 @@ struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; +DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); + /* * Rough estimation of how many shared IRQs there are, can * be changed anytime. diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 83dfd6696c2a..e8e041ed84d6 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -32,16 +32,6 @@ #include #endif -/* - * Various Linux-internal data structures created from the - * MP-table. - */ -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) -int mp_bus_id_to_type[MAX_MP_BUSSES]; -#endif - -DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); - /* * Checksum an MP configuration block. */ -- cgit v1.2.3 From 136ef671df04dc157afa0d4b96c7bd23ba072c9c Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 20 May 2008 00:29:59 +0400 Subject: x86: allow MPPARSE to be deselected in SMP configs --- arch/x86/Kconfig.debug | 2 +- arch/x86/kernel/setup_32.c | 2 +- arch/x86/kernel/setup_64.c | 4 ++++ 3 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index ac1e31ba4795..d5b364b43a02 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -127,7 +127,7 @@ config 4KSTACKS config X86_FIND_SMP_CONFIG def_bool y - depends on X86_LOCAL_APIC || X86_VOYAGER + depends on X86_MPPARSE || X86_VOYAGER || X86_VISWS depends on X86_32 config X86_MPPARSE diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index e1173aecf69a..c04e8c91daf7 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -814,7 +814,7 @@ void __init setup_arch(char **cmdline_p) "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n"); #endif #endif -#ifdef CONFIG_X86_LOCAL_APIC +#if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS) if (smp_found_config) get_smp_config(); #endif diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 975a5da46e49..89e6cca5d693 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -456,10 +456,12 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_reserve_bootmem(); +#ifdef CONFIG_X86_MPPARSE /* * Find and reserve possible boot-time SMP configuration: */ find_smp_config(); +#endif #ifdef CONFIG_BLK_DEV_INITRD if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) { unsigned long ramdisk_image = boot_params.hdr.ramdisk_image; @@ -502,11 +504,13 @@ void __init setup_arch(char **cmdline_p) init_cpu_to_node(); +#ifdef CONFIG_X86_MPPARSE /* * get boot-time SMP configuration: */ if (smp_found_config) get_smp_config(); +#endif init_apic_mappings(); ioapic_init_mappings(); -- cgit v1.2.3 From b764a15f679942a7bc9d4f9645299e1defcc5b43 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 22 May 2008 21:22:04 +0100 Subject: x86: Switch apm to unlocked_kernel This pushes the lock a fair way down and the final kill looks like it should be an easy project for someone who wants to have a shot at it. Signed-off-by: Alan Cox Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/apm_32.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index bf9290e29013..00e6d1370954 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -228,6 +228,7 @@ #include #include #include +#include #include #include @@ -1149,7 +1150,7 @@ static void queue_event(apm_event_t event, struct apm_user *sender) as->event_tail = 0; } as->events[as->event_head] = event; - if ((!as->suser) || (!as->writer)) + if (!as->suser || !as->writer) continue; switch (event) { case APM_SYS_SUSPEND: @@ -1396,7 +1397,7 @@ static void apm_mainloop(void) static int check_apm_user(struct apm_user *as, const char *func) { - if ((as == NULL) || (as->magic != APM_BIOS_MAGIC)) { + if (as == NULL || as->magic != APM_BIOS_MAGIC) { printk(KERN_ERR "apm: %s passed bad filp\n", func); return 1; } @@ -1459,18 +1460,19 @@ static unsigned int do_poll(struct file *fp, poll_table *wait) return 0; } -static int do_ioctl(struct inode *inode, struct file *filp, - u_int cmd, u_long arg) +static long do_ioctl(struct file *filp, u_int cmd, u_long arg) { struct apm_user *as; + int ret; as = filp->private_data; if (check_apm_user(as, "ioctl")) return -EIO; - if ((!as->suser) || (!as->writer)) + if (!as->suser || !as->writer) return -EPERM; switch (cmd) { case APM_IOC_STANDBY: + lock_kernel(); if (as->standbys_read > 0) { as->standbys_read--; as->standbys_pending--; @@ -1479,8 +1481,10 @@ static int do_ioctl(struct inode *inode, struct file *filp, queue_event(APM_USER_STANDBY, as); if (standbys_pending <= 0) standby(); + unlock_kernel(); break; case APM_IOC_SUSPEND: + lock_kernel(); if (as->suspends_read > 0) { as->suspends_read--; as->suspends_pending--; @@ -1488,16 +1492,17 @@ static int do_ioctl(struct inode *inode, struct file *filp, } else queue_event(APM_USER_SUSPEND, as); if (suspends_pending <= 0) { - return suspend(1); + ret = suspend(1); } else { as->suspend_wait = 1; wait_event_interruptible(apm_suspend_waitqueue, as->suspend_wait == 0); - return as->suspend_result; + ret = as->suspend_result; } - break; + unlock_kernel(); + return ret; default: - return -EINVAL; + return -ENOTTY; } return 0; } @@ -1860,7 +1865,7 @@ static const struct file_operations apm_bios_fops = { .owner = THIS_MODULE, .read = do_read, .poll = do_poll, - .ioctl = do_ioctl, + .unlocked_ioctl = do_ioctl, .open = do_open, .release = do_release, }; -- cgit v1.2.3 From 886dd58258e6ddebe20e7aebef7b167a24bad7ee Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 15:44:38 +0200 Subject: debugging: make stacktrace independent from DEBUG_KERNEL Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- lib/Kconfig.debug | 1 - 1 file changed, 1 deletion(-) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index d2099f41aa1e..9c17fb9d1d5e 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -419,7 +419,6 @@ config DEBUG_LOCKING_API_SELFTESTS config STACKTRACE bool - depends on DEBUG_KERNEL depends on STACKTRACE_SUPPORT config DEBUG_KOBJECT -- cgit v1.2.3 From c6531cce6e6e4b99bcda46b6268d6f2d9e30aea4 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:21:14 +0200 Subject: sched: do not trace sched_clock The tracer uses sched_clock, so do not trace it. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- kernel/sched.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index e2e985eeee78..6590a828138f 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -884,12 +884,12 @@ static unsigned long long __cpu_clock(int cpu) * For kernel-internal use: high-speed (but slightly incorrect) per-cpu * clock constructed from sched_clock(): */ -unsigned long long cpu_clock(int cpu) +unsigned long long notrace cpu_clock(int cpu) { unsigned long long prev_cpu_time, time, delta_time; unsigned long flags; - local_irq_save(flags); + raw_local_irq_save(flags); prev_cpu_time = per_cpu(prev_cpu_time, cpu); time = __cpu_clock(cpu) + per_cpu(time_offset, cpu); delta_time = time-prev_cpu_time; @@ -898,7 +898,7 @@ unsigned long long cpu_clock(int cpu) time = __sync_cpu_clock(time, cpu); per_cpu(prev_cpu_time, cpu) = time; } - local_irq_restore(flags); + raw_local_irq_restore(flags); return time; } -- cgit v1.2.3 From 2e4db9d2c5db9c9dd3e1d1ec3263bc4a990ff8df Mon Sep 17 00:00:00 2001 From: Fernando Luis Vazquez Cao Date: Mon, 19 May 2008 14:23:44 -0700 Subject: x86: remove duplicate declaration of unknown_nmi_panic Signed-off-by: Fernando Luis Vazquez Cao Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- include/asm-x86/nmi.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 1e363021e72f..8455bf36d8df 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -46,7 +46,6 @@ extern void nmi_watchdog_default(void); extern int check_nmi_watchdog(void); extern int nmi_watchdog_enabled; -extern int unknown_nmi_panic; extern int avail_to_resrv_perfctr_nmi_bit(unsigned int); extern int avail_to_resrv_perfctr_nmi(unsigned int); extern int reserve_perfctr_nmi(unsigned int); -- cgit v1.2.3 From 85cc35fa7255d113b5383a9c8536c363274bb475 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 25 May 2008 21:21:36 +0200 Subject: x86: fix mpparse fallout UP builds with LOCAL_APIC=y and IO_APIC=n fail with a missing reference to mp_bus_not_pci. Distangle the mpparse code some more and move the ioapic specific bus check into a separate function. This code needs sume urgent un#ifdef surgery all over the place. Signed-off-by: Thomas Gleixner --- arch/x86/kernel/mpparse.c | 73 ++++++++++++++++++++++++++--------------------- 1 file changed, 41 insertions(+), 32 deletions(-) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index e8e041ed84d6..9f3792d55044 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -81,6 +81,7 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m) generic_processor_info(apicid, m->mpc_apicver); } +#ifdef CONFIG_X86_IO_APIC static void __init MP_bus_info(struct mpc_config_bus *m) { char str[7]; @@ -122,6 +123,7 @@ static void __init MP_bus_info(struct mpc_config_bus *m) } else printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str); } +#endif #ifdef CONFIG_X86_IO_APIC @@ -336,7 +338,9 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early) { struct mpc_config_bus *m = (struct mpc_config_bus *)mpt; +#ifdef CONFIG_X86_IO_APIC MP_bus_info(m); +#endif mpt += sizeof(*m); count += sizeof(*m); break; @@ -472,40 +476,11 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type) MP_intsrc_info(&intsrc); } -#endif -static inline void __init construct_default_ISA_mptable(int mpc_default_type) +static void construct_ioapic_table(int mpc_default_type) { - struct mpc_config_processor processor; - struct mpc_config_bus bus; -#ifdef CONFIG_X86_IO_APIC struct mpc_config_ioapic ioapic; -#endif - struct mpc_config_lintsrc lintsrc; - int linttypes[2] = { mp_ExtINT, mp_NMI }; - int i; - - /* - * local APIC has default address - */ - mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; - - /* - * 2 CPUs, numbered 0 & 1. - */ - processor.mpc_type = MP_PROCESSOR; - /* Either an integrated APIC or a discrete 82489DX. */ - processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; - processor.mpc_cpuflag = CPU_ENABLED; - processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | - (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; - processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; - processor.mpc_reserved[0] = 0; - processor.mpc_reserved[1] = 0; - for (i = 0; i < 2; i++) { - processor.mpc_apicid = i; - MP_processor_info(&processor); - } + struct mpc_config_bus bus; bus.mpc_type = MP_BUS; bus.mpc_busid = 0; @@ -534,7 +509,6 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) MP_bus_info(&bus); } -#ifdef CONFIG_X86_IO_APIC ioapic.mpc_type = MP_IOAPIC; ioapic.mpc_apicid = 2; ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; @@ -546,7 +520,42 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) * We set up most of the low 16 IO-APIC pins according to MPS rules. */ construct_default_ioirq_mptable(mpc_default_type); +} +#else +static inline void construct_ioapic_table(int mpc_default_type) { } #endif + +static inline void __init construct_default_ISA_mptable(int mpc_default_type) +{ + struct mpc_config_processor processor; + struct mpc_config_lintsrc lintsrc; + int linttypes[2] = { mp_ExtINT, mp_NMI }; + int i; + + /* + * local APIC has default address + */ + mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; + + /* + * 2 CPUs, numbered 0 & 1. + */ + processor.mpc_type = MP_PROCESSOR; + /* Either an integrated APIC or a discrete 82489DX. */ + processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01; + processor.mpc_cpuflag = CPU_ENABLED; + processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | + (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; + processor.mpc_featureflag = boot_cpu_data.x86_capability[0]; + processor.mpc_reserved[0] = 0; + processor.mpc_reserved[1] = 0; + for (i = 0; i < 2; i++) { + processor.mpc_apicid = i; + MP_processor_info(&processor); + } + + construct_ioapic_table(mpc_default_type); + lintsrc.mpc_type = MP_LINTSRC; lintsrc.mpc_irqflag = 0; /* conforming */ lintsrc.mpc_srcbusid = 0; -- cgit v1.2.3 From ddca03c98a7f7ad5ab09967ff52d4ed60358c896 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:31 +0400 Subject: x86: nmi - unify die_nmi() interface By slightly changing 32bit mode die_nmi() we may unify the interface and make it common for both (32/64bit) modes Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 7 +++---- arch/x86/kernel/traps_32.c | 8 +++++--- include/asm-x86/nmi.h | 2 +- 3 files changed, 9 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 69bdae555c18..bd04a28f7a5c 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -320,8 +320,6 @@ void touch_nmi_watchdog(void) } EXPORT_SYMBOL(touch_nmi_watchdog); -extern void die_nmi(struct pt_regs *, const char *msg); - notrace __kprobes int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) { @@ -375,7 +373,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) /* * die_nmi will return ONLY if NOTIFY_STOP happens.. */ - die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP"); + die_nmi("BUG: NMI Watchdog detected LOCKUP", + regs, 0); } else { __get_cpu_var(last_irq_sum) = sum; local_set(&__get_cpu_var(alert_counter), 0); @@ -406,7 +405,7 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) char buf[64]; sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(regs, buf); + die_nmi(buf, regs, 0); return 0; } diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c index bde6f63e15d5..f31e6651fa6f 100644 --- a/arch/x86/kernel/traps_32.c +++ b/arch/x86/kernel/traps_32.c @@ -755,9 +755,9 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs) static DEFINE_SPINLOCK(nmi_print_lock); -void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg) +void notrace __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic) { - if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP) + if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) == NOTIFY_STOP) return; spin_lock(&nmi_print_lock); @@ -766,10 +766,12 @@ void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg) * to get a message out: */ bust_spinlocks(1); - printk(KERN_EMERG "%s", msg); + printk(KERN_EMERG "%s", str); printk(" on CPU%d, ip %08lx, registers:\n", smp_processor_id(), regs->ip); show_registers(regs); + if (do_panic) + panic("Non maskable interrupt"); console_silent(); spin_unlock(&nmi_print_lock); bust_spinlocks(0); diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 8455bf36d8df..7cd5b6a88138 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -38,12 +38,12 @@ static inline void unset_nmi_pm_callback(struct pm_dev *dev) #ifdef CONFIG_X86_64 extern void default_do_nmi(struct pt_regs *); -extern void die_nmi(char *str, struct pt_regs *regs, int do_panic); extern void nmi_watchdog_default(void); #else #define nmi_watchdog_default() do {} while (0) #endif +extern void die_nmi(char *str, struct pt_regs *regs, int do_panic); extern int check_nmi_watchdog(void); extern int nmi_watchdog_enabled; extern int avail_to_resrv_perfctr_nmi_bit(unsigned int); -- cgit v1.2.3 From e56b3a12c45e439169f2d1f7194be397667320a6 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:32 +0400 Subject: x86: nmi - die_nmi() output message unification Make 64bit die_nmi() to produce the same message as 32bit mode has Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_64.c | 4 ++-- arch/x86/kernel/traps_64.c | 4 +++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 33cb8ecbb6dd..1a98705270a2 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -358,8 +358,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) */ local_inc(&__get_cpu_var(alert_counter)); if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) - die_nmi("NMI Watchdog detected LOCKUP on CPU %d\n", regs, - panic_on_timeout); + die_nmi("NMI Watchdog detected LOCKUP", + regs, panic_on_timeout); } else { __get_cpu_var(last_irq_sum) = sum; local_set(&__get_cpu_var(alert_counter), 0); diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index adff76ea97c4..6a048ce3c787 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -614,7 +614,9 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic) * We are in trouble anyway, lets at least try * to get a message out. */ - printk(str, smp_processor_id()); + printk(KERN_EMERG "%s", str); + printk(" on CPU%d, ip %08lx, registers:\n", + smp_processor_id(), regs->ip); show_registers(regs); if (kexec_should_crash(current)) crash_kexec(regs); -- cgit v1.2.3 From c6425b9f143a75bbcd0a7684b4df40e20d0b2f32 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:33 +0400 Subject: x86: move do_nmi(), stop_nmi() and restart_nmi() to traps_64.c traps_32.c already holds these functions so do the same for traps_64.c Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_64.c | 25 ------------------------- arch/x86/kernel/traps_64.c | 24 ++++++++++++++++++++++++ 2 files changed, 24 insertions(+), 25 deletions(-) diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 1a98705270a2..c1ea671525e5 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -30,7 +30,6 @@ int unknown_nmi_panic; int nmi_watchdog_enabled; -int panic_on_unrecovered_nmi; static cpumask_t backtrace_mask = CPU_MASK_NONE; @@ -383,30 +382,6 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) return rc; } -static unsigned ignore_nmis; - -asmlinkage notrace __kprobes void -do_nmi(struct pt_regs *regs, long error_code) -{ - nmi_enter(); - add_pda(__nmi_count,1); - if (!ignore_nmis) - default_do_nmi(regs); - nmi_exit(); -} - -void stop_nmi(void) -{ - acpi_nmi_disable(); - ignore_nmis++; -} - -void restart_nmi(void) -{ - ignore_nmis--; - acpi_nmi_enable(); -} - #ifdef CONFIG_SYSCTL static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index 6a048ce3c787..e4a380797dc1 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -76,7 +76,9 @@ asmlinkage void alignment_check(void); asmlinkage void machine_check(void); asmlinkage void spurious_interrupt_bug(void); +int panic_on_unrecovered_nmi; static unsigned int code_bytes = 64; +static unsigned ignore_nmis; static inline void conditional_sti(struct pt_regs *regs) { @@ -867,6 +869,28 @@ asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs) io_check_error(reason, regs); } +asmlinkage notrace __kprobes void +do_nmi(struct pt_regs *regs, long error_code) +{ + nmi_enter(); + add_pda(__nmi_count, 1); + if (!ignore_nmis) + default_do_nmi(regs); + nmi_exit(); +} + +void stop_nmi(void) +{ + acpi_nmi_disable(); + ignore_nmis++; +} + +void restart_nmi(void) +{ + ignore_nmis--; + acpi_nmi_enable(); +} + /* runs on IST stack. */ asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code) { -- cgit v1.2.3 From d1b946b97d71423f365fa797d1428e1847c0bec1 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:34 +0400 Subject: x86: nmi_32.c - add "panic" option Allow to pass "panic" option in 32bit mode Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index bd04a28f7a5c..4437fe1edabc 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -42,6 +42,7 @@ static cpumask_t backtrace_mask = CPU_MASK_NONE; * 0: the lapic NMI watchdog is disabled, but can be enabled */ atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ +static int panic_on_timeout; unsigned int nmi_watchdog = NMI_DEFAULT; static unsigned int nmi_hz = HZ; @@ -140,6 +141,14 @@ static int __init setup_nmi_watchdog(char *str) { int nmi; + if (!strncmp(str, "panic", 5)) { + panic_on_timeout = 1; + str = strchr(str, ','); + if (!str) + return 1; + ++str; + } + get_option(&str, &nmi); if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) @@ -374,7 +383,7 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) * die_nmi will return ONLY if NOTIFY_STOP happens.. */ die_nmi("BUG: NMI Watchdog detected LOCKUP", - regs, 0); + regs, panic_on_timeout); } else { __get_cpu_var(last_irq_sum) = sum; local_set(&__get_cpu_var(alert_counter), 0); -- cgit v1.2.3 From 4b82b277707a39b97271439c475f186f63ec4692 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:35 +0400 Subject: x86: nmi_32.c - add nmi_watchdog_default helper Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 19 +++++++++++++------ include/asm-x86/nmi.h | 4 +--- 2 files changed, 14 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 4437fe1edabc..7714e8478213 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -51,6 +51,17 @@ static DEFINE_PER_CPU(short, wd_enabled); static int endflag __initdata = 0; +/* Run after command line and cpu_init init, but before all other checks */ +void nmi_watchdog_default(void) +{ + if (nmi_watchdog != NMI_DEFAULT) + return; + if (lapic_watchdog_ok()) + nmi_watchdog = NMI_LOCAL_APIC; + else + nmi_watchdog = NMI_IO_APIC; +} + #ifdef CONFIG_SMP /* The performance counters used by NMI_LOCAL_APIC don't trigger when * the CPU is idle. To make sure the NMI watchdog really ticks on all @@ -437,12 +448,8 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, return -EIO; } - if (nmi_watchdog == NMI_DEFAULT) { - if (lapic_watchdog_ok()) - nmi_watchdog = NMI_LOCAL_APIC; - else - nmi_watchdog = NMI_IO_APIC; - } + /* if nmi_watchdog is not set yet, then set it */ + nmi_watchdog_default(); if (nmi_watchdog == NMI_LOCAL_APIC) { if (nmi_watchdog_enabled) diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 7cd5b6a88138..1e8f34d7ab68 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -38,11 +38,9 @@ static inline void unset_nmi_pm_callback(struct pm_dev *dev) #ifdef CONFIG_X86_64 extern void default_do_nmi(struct pt_regs *); -extern void nmi_watchdog_default(void); -#else -#define nmi_watchdog_default() do {} while (0) #endif +extern void nmi_watchdog_default(void); extern void die_nmi(char *str, struct pt_regs *regs, int do_panic); extern int check_nmi_watchdog(void); extern int nmi_watchdog_enabled; -- cgit v1.2.3 From ad63ba169d45ccb6594eb35a6c31c421fe70ff45 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:36 +0400 Subject: x86: nmi_32/64.c - use apic_write_around instead of apic_write apic_write_around will be expanded to apic_write in 64bit mode anyway. Only a few CPUs (well, old CPUs to be precise) requires such an action. In general it should not hurt and could be cleaned up for apic_write (just in case) Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 2 +- arch/x86/kernel/nmi_64.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 7714e8478213..ec5842b4dd68 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -248,7 +248,7 @@ void acpi_nmi_enable(void) static void __acpi_nmi_disable(void *__unused) { - apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); + apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); } /* diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index c1ea671525e5..f546e3164a74 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -215,7 +215,7 @@ late_initcall(init_lapic_nmi_sysfs); static void __acpi_nmi_enable(void *__unused) { - apic_write(APIC_LVT0, APIC_DM_NMI); + apic_write_around(APIC_LVT0, APIC_DM_NMI); } /* @@ -229,7 +229,7 @@ void acpi_nmi_enable(void) static void __acpi_nmi_disable(void *__unused) { - apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); + apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); } /* -- cgit v1.2.3 From 6c8decdf14b17d42f6eb817d310642f4d6598a19 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:37 +0400 Subject: x86: nmi_32.c - unknown_nmi_panic_callback should always panic Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index ec5842b4dd68..d0b0684bde9e 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -425,7 +425,7 @@ static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) char buf[64]; sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf, regs, 0); + die_nmi(buf, regs, 1); /* Always panic here */ return 0; } -- cgit v1.2.3 From 96f9dcb10755e96eae706b9e869c0dc25adb3d74 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:38 +0400 Subject: x86: nmi_64.c - use for_each_possible_cpu helper Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index f546e3164a74..d98b21cd4928 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -98,7 +98,7 @@ int __init check_nmi_watchdog(void) smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); #endif - for (cpu = 0; cpu < NR_CPUS; cpu++) + for_each_possible_cpu(cpu) prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count; local_irq_enable(); mdelay((20*1000)/nmi_hz); // wait 20 ticks -- cgit v1.2.3 From 7c2ba83f9a479eee6f302147767a30f3187fbd4b Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:39 +0400 Subject: x86: nmi_32.c cleanup - use for_each_online_cpu helper Since cpu_online_map is touched (by for_each_online_cpu) at moment when cpu_callin_map is already filled up we can get rid of its checking at all Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index d0b0684bde9e..c6d0777aaf90 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -108,13 +108,7 @@ int __init check_nmi_watchdog(void) local_irq_enable(); mdelay((20*1000)/nmi_hz); // wait 20 ticks - for_each_possible_cpu(cpu) { -#ifdef CONFIG_SMP - /* Check cpu_callin_map here because that is set - after the timer is started. */ - if (!cpu_isset(cpu, cpu_callin_map)) - continue; -#endif + for_each_online_cpu(cpu) { if (!per_cpu(wd_enabled, cpu)) continue; if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { -- cgit v1.2.3 From fd5cea02de100197a4c26d9e103508cf09b50a82 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:40 +0400 Subject: x86: nmi_32/64.c - add helper functions to hide arch specific data Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_32.c | 44 ++++++++++++++++++++++++++++++++------------ arch/x86/kernel/nmi_64.c | 42 +++++++++++++++++++++++++++++++----------- 2 files changed, 63 insertions(+), 23 deletions(-) diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index c6d0777aaf90..a94dbedf2b74 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -51,6 +51,26 @@ static DEFINE_PER_CPU(short, wd_enabled); static int endflag __initdata = 0; +static inline unsigned int get_nmi_count(int cpu) +{ + return nmi_count(cpu); +} + +static inline int mce_in_progress(void) +{ + return 0; +} + +/* + * Take the local apic timer and PIT/HPET into account. We don't + * know which one is active, when we have highres/dyntick on + */ +static inline unsigned int get_timer_irqs(int cpu) +{ + return per_cpu(irq_stat, cpu).apic_timer_irqs + + per_cpu(irq_stat, cpu).irq0_irqs; +} + /* Run after command line and cpu_init init, but before all other checks */ void nmi_watchdog_default(void) { @@ -104,19 +124,19 @@ int __init check_nmi_watchdog(void) #endif for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = nmi_count(cpu); + prev_nmi_count[cpu] = get_nmi_count(cpu); local_irq_enable(); mdelay((20*1000)/nmi_hz); // wait 20 ticks for_each_online_cpu(cpu) { if (!per_cpu(wd_enabled, cpu)) continue; - if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { + if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { printk(KERN_WARNING "WARNING: CPU#%d: NMI " "appears to be stuck (%d->%d)!\n", cpu, prev_nmi_count[cpu], - nmi_count(cpu)); + get_nmi_count(cpu)); per_cpu(wd_enabled, cpu) = 0; atomic_dec(&nmi_active); } @@ -355,6 +375,13 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) touched = 1; } + sum = get_timer_irqs(cpu); + + if (__get_cpu_var(nmi_touch)) { + __get_cpu_var(nmi_touch) = 0; + touched = 1; + } + if (cpu_isset(cpu, backtrace_mask)) { static DEFINE_SPINLOCK(lock); /* Serialise the printks */ @@ -365,16 +392,9 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) cpu_clear(cpu, backtrace_mask); } - /* - * Take the local apic timer and PIT/HPET into account. We don't - * know which one is active, when we have highres/dyntick on - */ - sum = per_cpu(irq_stat, cpu).apic_timer_irqs + - per_cpu(irq_stat, cpu).irq0_irqs; - if (__get_cpu_var(nmi_touch)) { - __get_cpu_var(nmi_touch) = 0; + /* Could check oops_in_progress here too, but it's safer not to */ + if (mce_in_progress()) touched = 1; - } /* if the none of the timers isn't firing, this cpu isn't doing much */ if (!touched && __get_cpu_var(last_irq_sum) == sum) { diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index d98b21cd4928..c6802447262c 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -47,6 +47,30 @@ static unsigned int nmi_hz = HZ; static DEFINE_PER_CPU(short, wd_enabled); +static int endflag __initdata = 0; + +static inline unsigned int get_nmi_count(int cpu) +{ + return cpu_pda(cpu)->__nmi_count; +} + +static inline int mce_in_progress(void) +{ +#ifdef CONFIG_X86_MCE + return atomic_read(&mce_entry) > 0; +#endif + return 0; +} + +/* + * Take the local apic timer and PIT/HPET into account. We don't + * know which one is active, when we have highres/dyntick on + */ +static inline unsigned int get_timer_irqs(int cpu) +{ + return read_pda(apic_timer_irqs) + read_pda(irq0_irqs); +} + /* Run after command line and cpu_init init, but before all other checks */ void nmi_watchdog_default(void) { @@ -55,8 +79,6 @@ void nmi_watchdog_default(void) nmi_watchdog = NMI_NONE; } -static int endflag __initdata = 0; - #ifdef CONFIG_SMP /* The performance counters used by NMI_LOCAL_APIC don't trigger when * the CPU is idle. To make sure the NMI watchdog really ticks on all @@ -99,19 +121,19 @@ int __init check_nmi_watchdog(void) #endif for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count; + prev_nmi_count[cpu] = get_nmi_count(cpu); local_irq_enable(); mdelay((20*1000)/nmi_hz); // wait 20 ticks for_each_online_cpu(cpu) { if (!per_cpu(wd_enabled, cpu)) continue; - if (cpu_pda(cpu)->__nmi_count - prev_nmi_count[cpu] <= 5) { + if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { printk(KERN_WARNING "WARNING: CPU#%d: NMI " "appears to be stuck (%d->%d)!\n", cpu, prev_nmi_count[cpu], - cpu_pda(cpu)->__nmi_count); + get_nmi_count(cpu)); per_cpu(wd_enabled, cpu) = 0; atomic_dec(&nmi_active); } @@ -327,7 +349,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) touched = 1; } - sum = read_pda(apic_timer_irqs) + read_pda(irq0_irqs); + sum = get_timer_irqs(cpu); + if (__get_cpu_var(nmi_touch)) { __get_cpu_var(nmi_touch) = 0; touched = 1; @@ -343,12 +366,9 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) cpu_clear(cpu, backtrace_mask); } -#ifdef CONFIG_X86_MCE - /* Could check oops_in_progress here too, but it's safer - not too */ - if (atomic_read(&mce_entry) > 0) + if (mce_in_progress()) touched = 1; -#endif + /* if the apic timer isn't firing, this cpu isn't doing much */ if (!touched && __get_cpu_var(last_irq_sum) == sum) { /* -- cgit v1.2.3 From 1798bc22b2790bf2a956588e6b17c36ef79ceff7 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 24 May 2008 19:36:41 +0400 Subject: x86: nmi_32/64.c - merge down nmi_32.c and nmi_64.c to nmi.c Signed-off-by: Cyrill Gorcunov Cc: hpa@zytor.com Cc: mingo@redhat.com Signed-off-by: Thomas Gleixner --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/nmi.c | 533 +++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/nmi_32.c | 506 -------------------------------------------- arch/x86/kernel/nmi_64.c | 477 ------------------------------------------ 4 files changed, 534 insertions(+), 984 deletions(-) create mode 100644 arch/x86/kernel/nmi.c delete mode 100644 arch/x86/kernel/nmi_32.c delete mode 100644 arch/x86/kernel/nmi_64.c diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3b4720..d5dd6668225f 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -53,7 +53,7 @@ obj-$(CONFIG_X86_32_SMP) += smpcommon.o obj-$(CONFIG_X86_64_SMP) += tsc_sync.o smpcommon.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o obj-$(CONFIG_X86_MPPARSE) += mpparse.o -obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi_$(BITS).o +obj-$(CONFIG_X86_LOCAL_APIC) += apic_$(BITS).o nmi.o obj-$(CONFIG_X86_IO_APIC) += io_apic_$(BITS).o obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o obj-$(CONFIG_KEXEC) += machine_kexec_$(BITS).o diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c new file mode 100644 index 000000000000..69a839fc1eb0 --- /dev/null +++ b/arch/x86/kernel/nmi.c @@ -0,0 +1,533 @@ +/* + * NMI watchdog support on APIC systems + * + * Started by Ingo Molnar + * + * Fixes: + * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. + * Mikael Pettersson : Power Management for local APIC NMI watchdog. + * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog. + * Pavel Machek and + * Mikael Pettersson : PM converted to driver model. Disable/enable API. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include + +int unknown_nmi_panic; +int nmi_watchdog_enabled; + +static cpumask_t backtrace_mask = CPU_MASK_NONE; + +/* nmi_active: + * >0: the lapic NMI watchdog is active, but can be disabled + * <0: the lapic NMI watchdog has not been set up, and cannot + * be enabled + * 0: the lapic NMI watchdog is disabled, but can be enabled + */ +atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ +static int panic_on_timeout; + +unsigned int nmi_watchdog = NMI_DEFAULT; + +static unsigned int nmi_hz = HZ; +static DEFINE_PER_CPU(short, wd_enabled); +static int endflag __initdata = 0; + +static inline unsigned int get_nmi_count(int cpu) +{ +#ifdef CONFIG_X86_64 + return cpu_pda(cpu)->__nmi_count; +#else + return nmi_count(cpu); +#endif +} + +static inline int mce_in_progress(void) +{ +#if defined(CONFIX_X86_64) && defined(CONFIG_X86_MCE) + return atomic_read(&mce_entry) > 0; +#endif + return 0; +} + +/* + * Take the local apic timer and PIT/HPET into account. We don't + * know which one is active, when we have highres/dyntick on + */ +static inline unsigned int get_timer_irqs(int cpu) +{ +#ifdef CONFIG_X86_64 + return read_pda(apic_timer_irqs) + read_pda(irq0_irqs); +#else + return per_cpu(irq_stat, cpu).apic_timer_irqs + + per_cpu(irq_stat, cpu).irq0_irqs; +#endif +} + +/* Run after command line and cpu_init init, but before all other checks */ +void nmi_watchdog_default(void) +{ + if (nmi_watchdog != NMI_DEFAULT) + return; +#ifdef CONFIG_X86_64 + nmi_watchdog = NMI_NONE; +#else + if (lapic_watchdog_ok()) + nmi_watchdog = NMI_LOCAL_APIC; + else + nmi_watchdog = NMI_IO_APIC; +#endif +} + +#ifdef CONFIG_SMP +/* + * The performance counters used by NMI_LOCAL_APIC don't trigger when + * the CPU is idle. To make sure the NMI watchdog really ticks on all + * CPUs during the test make them busy. + */ +static __init void nmi_cpu_busy(void *data) +{ + local_irq_enable_in_hardirq(); + /* + * Intentionally don't use cpu_relax here. This is + * to make sure that the performance counter really ticks, + * even if there is a simulator or similar that catches the + * pause instruction. On a real HT machine this is fine because + * all other CPUs are busy with "useless" delay loops and don't + * care if they get somewhat less cycles. + */ + while (endflag == 0) + mb(); +} +#endif + +int __init check_nmi_watchdog(void) +{ + unsigned int *prev_nmi_count; + int cpu; + + if (nmi_watchdog == NMI_NONE || nmi_watchdog == NMI_DISABLED) + return 0; + + if (!atomic_read(&nmi_active)) + return 0; + + prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); + if (!prev_nmi_count) + goto error; + + printk(KERN_INFO "Testing NMI watchdog ... "); + +#ifdef CONFIG_SMP + if (nmi_watchdog == NMI_LOCAL_APIC) + smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); +#endif + + for_each_possible_cpu(cpu) + prev_nmi_count[cpu] = get_nmi_count(cpu); + local_irq_enable(); + mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */ + + for_each_online_cpu(cpu) { + if (!per_cpu(wd_enabled, cpu)) + continue; + if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { + printk(KERN_WARNING "WARNING: CPU#%d: NMI " + "appears to be stuck (%d->%d)!\n", + cpu, + prev_nmi_count[cpu], + get_nmi_count(cpu)); + per_cpu(wd_enabled, cpu) = 0; + atomic_dec(&nmi_active); + } + } + endflag = 1; + if (!atomic_read(&nmi_active)) { + kfree(prev_nmi_count); + atomic_set(&nmi_active, -1); + goto error; + } + printk("OK.\n"); + + /* + * now that we know it works we can reduce NMI frequency to + * something more reasonable; makes a difference in some configs + */ + if (nmi_watchdog == NMI_LOCAL_APIC) + nmi_hz = lapic_adjust_nmi_hz(1); + + kfree(prev_nmi_count); + return 0; + +error: +#ifdef CONFIG_X86_32 + timer_ack = !cpu_has_tsc; +#endif + return -1; +} + +static int __init setup_nmi_watchdog(char *str) +{ + int nmi; + + if (!strncmp(str, "panic", 5)) { + panic_on_timeout = 1; + str = strchr(str, ','); + if (!str) + return 1; + ++str; + } + + get_option(&str, &nmi); + + if (nmi >= NMI_INVALID || nmi < NMI_NONE) + return 0; + + nmi_watchdog = nmi; + return 1; +} +__setup("nmi_watchdog=", setup_nmi_watchdog); + +/* + * Suspend/resume support + */ +#ifdef CONFIG_PM + +static int nmi_pm_active; /* nmi_active before suspend */ + +static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) +{ + /* only CPU0 goes here, other CPUs should be offline */ + nmi_pm_active = atomic_read(&nmi_active); + stop_apic_nmi_watchdog(NULL); + BUG_ON(atomic_read(&nmi_active) != 0); + return 0; +} + +static int lapic_nmi_resume(struct sys_device *dev) +{ + /* only CPU0 goes here, other CPUs should be offline */ + if (nmi_pm_active > 0) { + setup_apic_nmi_watchdog(NULL); + touch_nmi_watchdog(); + } + return 0; +} + +static struct sysdev_class nmi_sysclass = { + .name = "lapic_nmi", + .resume = lapic_nmi_resume, + .suspend = lapic_nmi_suspend, +}; + +static struct sys_device device_lapic_nmi = { + .id = 0, + .cls = &nmi_sysclass, +}; + +static int __init init_lapic_nmi_sysfs(void) +{ + int error; + + /* + * should really be a BUG_ON but b/c this is an + * init call, it just doesn't work. -dcz + */ + if (nmi_watchdog != NMI_LOCAL_APIC) + return 0; + + if (atomic_read(&nmi_active) < 0) + return 0; + + error = sysdev_class_register(&nmi_sysclass); + if (!error) + error = sysdev_register(&device_lapic_nmi); + return error; +} + +/* must come after the local APIC's device_initcall() */ +late_initcall(init_lapic_nmi_sysfs); + +#endif /* CONFIG_PM */ + +static void __acpi_nmi_enable(void *__unused) +{ + apic_write_around(APIC_LVT0, APIC_DM_NMI); +} + +/* + * Enable timer based NMIs on all CPUs: + */ +void acpi_nmi_enable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); +} + +static void __acpi_nmi_disable(void *__unused) +{ + apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); +} + +/* + * Disable timer based NMIs on all CPUs: + */ +void acpi_nmi_disable(void) +{ + if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) + on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); +} + +void setup_apic_nmi_watchdog(void *unused) +{ + if (__get_cpu_var(wd_enabled)) + return; + + /* cheap hack to support suspend/resume */ + /* if cpu0 is not active neither should the other cpus */ + if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0) + return; + + switch (nmi_watchdog) { + case NMI_LOCAL_APIC: + /* enable it before to avoid race with handler */ + __get_cpu_var(wd_enabled) = 1; + if (lapic_watchdog_init(nmi_hz) < 0) { + __get_cpu_var(wd_enabled) = 0; + return; + } + /* FALL THROUGH */ + case NMI_IO_APIC: + __get_cpu_var(wd_enabled) = 1; + atomic_inc(&nmi_active); + } +} + +void stop_apic_nmi_watchdog(void *unused) +{ + /* only support LOCAL and IO APICs for now */ + if (nmi_watchdog != NMI_LOCAL_APIC && + nmi_watchdog != NMI_IO_APIC) + return; + if (__get_cpu_var(wd_enabled) == 0) + return; + if (nmi_watchdog == NMI_LOCAL_APIC) + lapic_watchdog_stop(); + __get_cpu_var(wd_enabled) = 0; + atomic_dec(&nmi_active); +} + +/* + * the best way to detect whether a CPU has a 'hard lockup' problem + * is to check it's local APIC timer IRQ counts. If they are not + * changing then that CPU has some problem. + * + * as these watchdog NMI IRQs are generated on every CPU, we only + * have to check the current processor. + * + * since NMIs don't listen to _any_ locks, we have to be extremely + * careful not to rely on unsafe variables. The printk might lock + * up though, so we have to break up any console locks first ... + * [when there will be more tty-related locks, break them up here too!] + */ + +static DEFINE_PER_CPU(unsigned, last_irq_sum); +static DEFINE_PER_CPU(local_t, alert_counter); +static DEFINE_PER_CPU(int, nmi_touch); + +void touch_nmi_watchdog(void) +{ + if (nmi_watchdog > 0) { + unsigned cpu; + + /* + * Tell other CPUs to reset their alert counters. We cannot + * do it ourselves because the alert count increase is not + * atomic. + */ + for_each_present_cpu(cpu) { + if (per_cpu(nmi_touch, cpu) != 1) + per_cpu(nmi_touch, cpu) = 1; + } + } + + /* + * Tickle the softlockup detector too: + */ + touch_softlockup_watchdog(); +} +EXPORT_SYMBOL(touch_nmi_watchdog); + +notrace __kprobes int +nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) +{ + /* + * Since current_thread_info()-> is always on the stack, and we + * always switch the stack NMI-atomically, it's safe to use + * smp_processor_id(). + */ + unsigned int sum; + int touched = 0; + int cpu = smp_processor_id(); + int rc = 0; + + /* check for other users first */ + if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) + == NOTIFY_STOP) { + rc = 1; + touched = 1; + } + + sum = get_timer_irqs(cpu); + + if (__get_cpu_var(nmi_touch)) { + __get_cpu_var(nmi_touch) = 0; + touched = 1; + } + + if (cpu_isset(cpu, backtrace_mask)) { + static DEFINE_SPINLOCK(lock); /* Serialise the printks */ + + spin_lock(&lock); + printk("NMI backtrace for cpu %d\n", cpu); + dump_stack(); + spin_unlock(&lock); + cpu_clear(cpu, backtrace_mask); + } + + /* Could check oops_in_progress here too, but it's safer not to */ + if (mce_in_progress()) + touched = 1; + + /* if the none of the timers isn't firing, this cpu isn't doing much */ + if (!touched && __get_cpu_var(last_irq_sum) == sum) { + /* + * Ayiee, looks like this CPU is stuck ... + * wait a few IRQs (5 seconds) before doing the oops ... + */ + local_inc(&__get_cpu_var(alert_counter)); + if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz) + /* + * die_nmi will return ONLY if NOTIFY_STOP happens.. + */ + die_nmi("BUG: NMI Watchdog detected LOCKUP", + regs, panic_on_timeout); + } else { + __get_cpu_var(last_irq_sum) = sum; + local_set(&__get_cpu_var(alert_counter), 0); + } + + /* see if the nmi watchdog went off */ + if (!__get_cpu_var(wd_enabled)) + return rc; + switch (nmi_watchdog) { + case NMI_LOCAL_APIC: + rc |= lapic_wd_event(nmi_hz); + break; + case NMI_IO_APIC: + /* + * don't know how to accurately check for this. + * just assume it was a watchdog timer interrupt + * This matches the old behaviour. + */ + rc = 1; + break; + } + return rc; +} + +#ifdef CONFIG_SYSCTL + +static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) +{ + unsigned char reason = get_nmi_reason(); + char buf[64]; + + sprintf(buf, "NMI received for unknown reason %02x\n", reason); + die_nmi(buf, regs, 1); /* Always panic here */ + return 0; +} + +/* + * proc handler for /proc/sys/kernel/nmi + */ +int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, + void __user *buffer, size_t *length, loff_t *ppos) +{ + int old_state; + + nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; + old_state = nmi_watchdog_enabled; + proc_dointvec(table, write, file, buffer, length, ppos); + if (!!old_state == !!nmi_watchdog_enabled) + return 0; + + if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { + printk(KERN_WARNING + "NMI watchdog is permanently disabled\n"); + return -EIO; + } + + /* if nmi_watchdog is not set yet, then set it */ + nmi_watchdog_default(); + + if (nmi_watchdog == NMI_LOCAL_APIC) { + if (nmi_watchdog_enabled) + enable_lapic_nmi_watchdog(); + else + disable_lapic_nmi_watchdog(); + } else { + printk(KERN_WARNING + "NMI watchdog doesn't know what hardware to touch\n"); + return -EIO; + } + return 0; +} + +#endif /* CONFIG_SYSCTL */ + +int do_nmi_callback(struct pt_regs *regs, int cpu) +{ +#ifdef CONFIG_SYSCTL + if (unknown_nmi_panic) + return unknown_nmi_panic_callback(regs, cpu); +#endif + return 0; +} + +void __trigger_all_cpu_backtrace(void) +{ + int i; + + backtrace_mask = cpu_online_map; + /* Wait for up to 10 seconds for all CPUs to do the backtrace */ + for (i = 0; i < 10 * 1000; i++) { + if (cpus_empty(backtrace_mask)) + break; + mdelay(1); + } +} + +EXPORT_SYMBOL(nmi_active); +EXPORT_SYMBOL(nmi_watchdog); + diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c deleted file mode 100644 index a94dbedf2b74..000000000000 --- a/arch/x86/kernel/nmi_32.c +++ /dev/null @@ -1,506 +0,0 @@ -/* - * NMI watchdog support on APIC systems - * - * Started by Ingo Molnar - * - * Fixes: - * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. - * Mikael Pettersson : Power Management for local APIC NMI watchdog. - * Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog. - * Pavel Machek and - * Mikael Pettersson : PM converted to driver model. Disable/enable API. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "mach_traps.h" - -int unknown_nmi_panic; -int nmi_watchdog_enabled; - -static cpumask_t backtrace_mask = CPU_MASK_NONE; - -/* nmi_active: - * >0: the lapic NMI watchdog is active, but can be disabled - * <0: the lapic NMI watchdog has not been set up, and cannot - * be enabled - * 0: the lapic NMI watchdog is disabled, but can be enabled - */ -atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -static int panic_on_timeout; - -unsigned int nmi_watchdog = NMI_DEFAULT; -static unsigned int nmi_hz = HZ; - -static DEFINE_PER_CPU(short, wd_enabled); - -static int endflag __initdata = 0; - -static inline unsigned int get_nmi_count(int cpu) -{ - return nmi_count(cpu); -} - -static inline int mce_in_progress(void) -{ - return 0; -} - -/* - * Take the local apic timer and PIT/HPET into account. We don't - * know which one is active, when we have highres/dyntick on - */ -static inline unsigned int get_timer_irqs(int cpu) -{ - return per_cpu(irq_stat, cpu).apic_timer_irqs + - per_cpu(irq_stat, cpu).irq0_irqs; -} - -/* Run after command line and cpu_init init, but before all other checks */ -void nmi_watchdog_default(void) -{ - if (nmi_watchdog != NMI_DEFAULT) - return; - if (lapic_watchdog_ok()) - nmi_watchdog = NMI_LOCAL_APIC; - else - nmi_watchdog = NMI_IO_APIC; -} - -#ifdef CONFIG_SMP -/* The performance counters used by NMI_LOCAL_APIC don't trigger when - * the CPU is idle. To make sure the NMI watchdog really ticks on all - * CPUs during the test make them busy. - */ -static __init void nmi_cpu_busy(void *data) -{ - local_irq_enable_in_hardirq(); - /* Intentionally don't use cpu_relax here. This is - to make sure that the performance counter really ticks, - even if there is a simulator or similar that catches the - pause instruction. On a real HT machine this is fine because - all other CPUs are busy with "useless" delay loops and don't - care if they get somewhat less cycles. */ - while (endflag == 0) - mb(); -} -#endif - -int __init check_nmi_watchdog(void) -{ - unsigned int *prev_nmi_count; - int cpu; - - if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) - return 0; - - if (!atomic_read(&nmi_active)) - return 0; - - prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); - if (!prev_nmi_count) - goto error; - - printk(KERN_INFO "Testing NMI watchdog ... "); - -#ifdef CONFIG_SMP - if (nmi_watchdog == NMI_LOCAL_APIC) - smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); -#endif - - for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = get_nmi_count(cpu); - local_irq_enable(); - mdelay((20*1000)/nmi_hz); // wait 20 ticks - - for_each_online_cpu(cpu) { - if (!per_cpu(wd_enabled, cpu)) - continue; - if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { - printk(KERN_WARNING "WARNING: CPU#%d: NMI " - "appears to be stuck (%d->%d)!\n", - cpu, - prev_nmi_count[cpu], - get_nmi_count(cpu)); - per_cpu(wd_enabled, cpu) = 0; - atomic_dec(&nmi_active); - } - } - endflag = 1; - if (!atomic_read(&nmi_active)) { - kfree(prev_nmi_count); - atomic_set(&nmi_active, -1); - goto error; - } - printk("OK.\n"); - - /* now that we know it works we can reduce NMI frequency to - something more reasonable; makes a difference in some configs */ - if (nmi_watchdog == NMI_LOCAL_APIC) - nmi_hz = lapic_adjust_nmi_hz(1); - - kfree(prev_nmi_count); - return 0; -error: - timer_ack = !cpu_has_tsc; - - return -1; -} - -static int __init setup_nmi_watchdog(char *str) -{ - int nmi; - - if (!strncmp(str, "panic", 5)) { - panic_on_timeout = 1; - str = strchr(str, ','); - if (!str) - return 1; - ++str; - } - - get_option(&str, &nmi); - - if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) - return 0; - - nmi_watchdog = nmi; - return 1; -} - -__setup("nmi_watchdog=", setup_nmi_watchdog); - - -/* Suspend/resume support */ - -#ifdef CONFIG_PM - -static int nmi_pm_active; /* nmi_active before suspend */ - -static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) -{ - /* only CPU0 goes here, other CPUs should be offline */ - nmi_pm_active = atomic_read(&nmi_active); - stop_apic_nmi_watchdog(NULL); - BUG_ON(atomic_read(&nmi_active) != 0); - return 0; -} - -static int lapic_nmi_resume(struct sys_device *dev) -{ - /* only CPU0 goes here, other CPUs should be offline */ - if (nmi_pm_active > 0) { - setup_apic_nmi_watchdog(NULL); - touch_nmi_watchdog(); - } - return 0; -} - - -static struct sysdev_class nmi_sysclass = { - .name = "lapic_nmi", - .resume = lapic_nmi_resume, - .suspend = lapic_nmi_suspend, -}; - -static struct sys_device device_lapic_nmi = { - .id = 0, - .cls = &nmi_sysclass, -}; - -static int __init init_lapic_nmi_sysfs(void) -{ - int error; - - /* should really be a BUG_ON but b/c this is an - * init call, it just doesn't work. -dcz - */ - if (nmi_watchdog != NMI_LOCAL_APIC) - return 0; - - if (atomic_read(&nmi_active) < 0) - return 0; - - error = sysdev_class_register(&nmi_sysclass); - if (!error) - error = sysdev_register(&device_lapic_nmi); - return error; -} -/* must come after the local APIC's device_initcall() */ -late_initcall(init_lapic_nmi_sysfs); - -#endif /* CONFIG_PM */ - -static void __acpi_nmi_enable(void *__unused) -{ - apic_write_around(APIC_LVT0, APIC_DM_NMI); -} - -/* - * Enable timer based NMIs on all CPUs: - */ -void acpi_nmi_enable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); -} - -static void __acpi_nmi_disable(void *__unused) -{ - apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); -} - -/* - * Disable timer based NMIs on all CPUs: - */ -void acpi_nmi_disable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); -} - -void setup_apic_nmi_watchdog(void *unused) -{ - if (__get_cpu_var(wd_enabled)) - return; - - /* cheap hack to support suspend/resume */ - /* if cpu0 is not active neither should the other cpus */ - if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) - return; - - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - __get_cpu_var(wd_enabled) = 1; /* enable it before to avoid race with handler */ - if (lapic_watchdog_init(nmi_hz) < 0) { - __get_cpu_var(wd_enabled) = 0; - return; - } - /* FALL THROUGH */ - case NMI_IO_APIC: - __get_cpu_var(wd_enabled) = 1; - atomic_inc(&nmi_active); - } -} - -void stop_apic_nmi_watchdog(void *unused) -{ - /* only support LOCAL and IO APICs for now */ - if ((nmi_watchdog != NMI_LOCAL_APIC) && - (nmi_watchdog != NMI_IO_APIC)) - return; - if (__get_cpu_var(wd_enabled) == 0) - return; - if (nmi_watchdog == NMI_LOCAL_APIC) - lapic_watchdog_stop(); - __get_cpu_var(wd_enabled) = 0; - atomic_dec(&nmi_active); -} - -/* - * the best way to detect whether a CPU has a 'hard lockup' problem - * is to check it's local APIC timer IRQ counts. If they are not - * changing then that CPU has some problem. - * - * as these watchdog NMI IRQs are generated on every CPU, we only - * have to check the current processor. - * - * since NMIs don't listen to _any_ locks, we have to be extremely - * careful not to rely on unsafe variables. The printk might lock - * up though, so we have to break up any console locks first ... - * [when there will be more tty-related locks, break them up - * here too!] - */ - -static DEFINE_PER_CPU(unsigned, last_irq_sum); -static DEFINE_PER_CPU(local_t, alert_counter); -static DEFINE_PER_CPU(int, nmi_touch); - -void touch_nmi_watchdog(void) -{ - if (nmi_watchdog > 0) { - unsigned cpu; - - /* - * Tell other CPUs to reset their alert counters. We cannot - * do it ourselves because the alert count increase is not - * atomic. - */ - for_each_present_cpu(cpu) { - if (per_cpu(nmi_touch, cpu) != 1) - per_cpu(nmi_touch, cpu) = 1; - } - } - - /* - * Tickle the softlockup detector too: - */ - touch_softlockup_watchdog(); -} -EXPORT_SYMBOL(touch_nmi_watchdog); - -notrace __kprobes int -nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) -{ - - /* - * Since current_thread_info()-> is always on the stack, and we - * always switch the stack NMI-atomically, it's safe to use - * smp_processor_id(). - */ - unsigned int sum; - int touched = 0; - int cpu = smp_processor_id(); - int rc = 0; - - /* check for other users first */ - if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) - == NOTIFY_STOP) { - rc = 1; - touched = 1; - } - - sum = get_timer_irqs(cpu); - - if (__get_cpu_var(nmi_touch)) { - __get_cpu_var(nmi_touch) = 0; - touched = 1; - } - - if (cpu_isset(cpu, backtrace_mask)) { - static DEFINE_SPINLOCK(lock); /* Serialise the printks */ - - spin_lock(&lock); - printk("NMI backtrace for cpu %d\n", cpu); - dump_stack(); - spin_unlock(&lock); - cpu_clear(cpu, backtrace_mask); - } - - /* Could check oops_in_progress here too, but it's safer not to */ - if (mce_in_progress()) - touched = 1; - - /* if the none of the timers isn't firing, this cpu isn't doing much */ - if (!touched && __get_cpu_var(last_irq_sum) == sum) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - local_inc(&__get_cpu_var(alert_counter)); - if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) - /* - * die_nmi will return ONLY if NOTIFY_STOP happens.. - */ - die_nmi("BUG: NMI Watchdog detected LOCKUP", - regs, panic_on_timeout); - } else { - __get_cpu_var(last_irq_sum) = sum; - local_set(&__get_cpu_var(alert_counter), 0); - } - /* see if the nmi watchdog went off */ - if (!__get_cpu_var(wd_enabled)) - return rc; - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - rc |= lapic_wd_event(nmi_hz); - break; - case NMI_IO_APIC: - /* don't know how to accurately check for this. - * just assume it was a watchdog timer interrupt - * This matches the old behaviour. - */ - rc = 1; - break; - } - return rc; -} - -#ifdef CONFIG_SYSCTL - -static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) -{ - unsigned char reason = get_nmi_reason(); - char buf[64]; - - sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf, regs, 1); /* Always panic here */ - return 0; -} - -/* - * proc handler for /proc/sys/kernel/nmi - */ -int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, - void __user *buffer, size_t *length, loff_t *ppos) -{ - int old_state; - - nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; - old_state = nmi_watchdog_enabled; - proc_dointvec(table, write, file, buffer, length, ppos); - if (!!old_state == !!nmi_watchdog_enabled) - return 0; - - if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { - printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); - return -EIO; - } - - /* if nmi_watchdog is not set yet, then set it */ - nmi_watchdog_default(); - - if (nmi_watchdog == NMI_LOCAL_APIC) { - if (nmi_watchdog_enabled) - enable_lapic_nmi_watchdog(); - else - disable_lapic_nmi_watchdog(); - } else { - printk( KERN_WARNING - "NMI watchdog doesn't know what hardware to touch\n"); - return -EIO; - } - return 0; -} - -#endif - -int do_nmi_callback(struct pt_regs *regs, int cpu) -{ -#ifdef CONFIG_SYSCTL - if (unknown_nmi_panic) - return unknown_nmi_panic_callback(regs, cpu); -#endif - return 0; -} - -void __trigger_all_cpu_backtrace(void) -{ - int i; - - backtrace_mask = cpu_online_map; - /* Wait for up to 10 seconds for all CPUs to do the backtrace */ - for (i = 0; i < 10 * 1000; i++) { - if (cpus_empty(backtrace_mask)) - break; - mdelay(1); - } -} - -EXPORT_SYMBOL(nmi_active); -EXPORT_SYMBOL(nmi_watchdog); diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c deleted file mode 100644 index c6802447262c..000000000000 --- a/arch/x86/kernel/nmi_64.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * NMI watchdog support on APIC systems - * - * Started by Ingo Molnar - * - * Fixes: - * Mikael Pettersson : AMD K7 support for local APIC NMI watchdog. - * Mikael Pettersson : Power Management for local APIC NMI watchdog. - * Pavel Machek and - * Mikael Pettersson : PM converted to driver model. Disable/enable API. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -int unknown_nmi_panic; -int nmi_watchdog_enabled; - -static cpumask_t backtrace_mask = CPU_MASK_NONE; - -/* nmi_active: - * >0: the lapic NMI watchdog is active, but can be disabled - * <0: the lapic NMI watchdog has not been set up, and cannot - * be enabled - * 0: the lapic NMI watchdog is disabled, but can be enabled - */ -atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -static int panic_on_timeout; - -unsigned int nmi_watchdog = NMI_DEFAULT; -static unsigned int nmi_hz = HZ; - -static DEFINE_PER_CPU(short, wd_enabled); - -static int endflag __initdata = 0; - -static inline unsigned int get_nmi_count(int cpu) -{ - return cpu_pda(cpu)->__nmi_count; -} - -static inline int mce_in_progress(void) -{ -#ifdef CONFIG_X86_MCE - return atomic_read(&mce_entry) > 0; -#endif - return 0; -} - -/* - * Take the local apic timer and PIT/HPET into account. We don't - * know which one is active, when we have highres/dyntick on - */ -static inline unsigned int get_timer_irqs(int cpu) -{ - return read_pda(apic_timer_irqs) + read_pda(irq0_irqs); -} - -/* Run after command line and cpu_init init, but before all other checks */ -void nmi_watchdog_default(void) -{ - if (nmi_watchdog != NMI_DEFAULT) - return; - nmi_watchdog = NMI_NONE; -} - -#ifdef CONFIG_SMP -/* The performance counters used by NMI_LOCAL_APIC don't trigger when - * the CPU is idle. To make sure the NMI watchdog really ticks on all - * CPUs during the test make them busy. - */ -static __init void nmi_cpu_busy(void *data) -{ - local_irq_enable_in_hardirq(); - /* Intentionally don't use cpu_relax here. This is - to make sure that the performance counter really ticks, - even if there is a simulator or similar that catches the - pause instruction. On a real HT machine this is fine because - all other CPUs are busy with "useless" delay loops and don't - care if they get somewhat less cycles. */ - while (endflag == 0) - mb(); -} -#endif - -int __init check_nmi_watchdog(void) -{ - unsigned int *prev_nmi_count; - int cpu; - - if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DISABLED)) - return 0; - - if (!atomic_read(&nmi_active)) - return 0; - - prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); - if (!prev_nmi_count) - return -1; - - printk(KERN_INFO "Testing NMI watchdog ... "); - -#ifdef CONFIG_SMP - if (nmi_watchdog == NMI_LOCAL_APIC) - smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); -#endif - - for_each_possible_cpu(cpu) - prev_nmi_count[cpu] = get_nmi_count(cpu); - local_irq_enable(); - mdelay((20*1000)/nmi_hz); // wait 20 ticks - - for_each_online_cpu(cpu) { - if (!per_cpu(wd_enabled, cpu)) - continue; - if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { - printk(KERN_WARNING "WARNING: CPU#%d: NMI " - "appears to be stuck (%d->%d)!\n", - cpu, - prev_nmi_count[cpu], - get_nmi_count(cpu)); - per_cpu(wd_enabled, cpu) = 0; - atomic_dec(&nmi_active); - } - } - endflag = 1; - if (!atomic_read(&nmi_active)) { - kfree(prev_nmi_count); - atomic_set(&nmi_active, -1); - return -1; - } - printk("OK.\n"); - - /* now that we know it works we can reduce NMI frequency to - something more reasonable; makes a difference in some configs */ - if (nmi_watchdog == NMI_LOCAL_APIC) - nmi_hz = lapic_adjust_nmi_hz(1); - - kfree(prev_nmi_count); - return 0; -} - -static int __init setup_nmi_watchdog(char *str) -{ - int nmi; - - if (!strncmp(str,"panic",5)) { - panic_on_timeout = 1; - str = strchr(str, ','); - if (!str) - return 1; - ++str; - } - - get_option(&str, &nmi); - - if ((nmi >= NMI_INVALID) || (nmi < NMI_NONE)) - return 0; - - nmi_watchdog = nmi; - return 1; -} - -__setup("nmi_watchdog=", setup_nmi_watchdog); - -#ifdef CONFIG_PM - -static int nmi_pm_active; /* nmi_active before suspend */ - -static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state) -{ - /* only CPU0 goes here, other CPUs should be offline */ - nmi_pm_active = atomic_read(&nmi_active); - stop_apic_nmi_watchdog(NULL); - BUG_ON(atomic_read(&nmi_active) != 0); - return 0; -} - -static int lapic_nmi_resume(struct sys_device *dev) -{ - /* only CPU0 goes here, other CPUs should be offline */ - if (nmi_pm_active > 0) { - setup_apic_nmi_watchdog(NULL); - touch_nmi_watchdog(); - } - return 0; -} - -static struct sysdev_class nmi_sysclass = { - .name = "lapic_nmi", - .resume = lapic_nmi_resume, - .suspend = lapic_nmi_suspend, -}; - -static struct sys_device device_lapic_nmi = { - .id = 0, - .cls = &nmi_sysclass, -}; - -static int __init init_lapic_nmi_sysfs(void) -{ - int error; - - /* should really be a BUG_ON but b/c this is an - * init call, it just doesn't work. -dcz - */ - if (nmi_watchdog != NMI_LOCAL_APIC) - return 0; - - if (atomic_read(&nmi_active) < 0) - return 0; - - error = sysdev_class_register(&nmi_sysclass); - if (!error) - error = sysdev_register(&device_lapic_nmi); - return error; -} -/* must come after the local APIC's device_initcall() */ -late_initcall(init_lapic_nmi_sysfs); - -#endif /* CONFIG_PM */ - -static void __acpi_nmi_enable(void *__unused) -{ - apic_write_around(APIC_LVT0, APIC_DM_NMI); -} - -/* - * Enable timer based NMIs on all CPUs: - */ -void acpi_nmi_enable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_enable, NULL, 0, 1); -} - -static void __acpi_nmi_disable(void *__unused) -{ - apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED); -} - -/* - * Disable timer based NMIs on all CPUs: - */ -void acpi_nmi_disable(void) -{ - if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC) - on_each_cpu(__acpi_nmi_disable, NULL, 0, 1); -} - -void setup_apic_nmi_watchdog(void *unused) -{ - if (__get_cpu_var(wd_enabled)) - return; - - /* cheap hack to support suspend/resume */ - /* if cpu0 is not active neither should the other cpus */ - if ((smp_processor_id() != 0) && (atomic_read(&nmi_active) <= 0)) - return; - - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - __get_cpu_var(wd_enabled) = 1; - if (lapic_watchdog_init(nmi_hz) < 0) { - __get_cpu_var(wd_enabled) = 0; - return; - } - /* FALL THROUGH */ - case NMI_IO_APIC: - __get_cpu_var(wd_enabled) = 1; - atomic_inc(&nmi_active); - } -} - -void stop_apic_nmi_watchdog(void *unused) -{ - /* only support LOCAL and IO APICs for now */ - if ((nmi_watchdog != NMI_LOCAL_APIC) && - (nmi_watchdog != NMI_IO_APIC)) - return; - if (__get_cpu_var(wd_enabled) == 0) - return; - if (nmi_watchdog == NMI_LOCAL_APIC) - lapic_watchdog_stop(); - __get_cpu_var(wd_enabled) = 0; - atomic_dec(&nmi_active); -} - -/* - * the best way to detect whether a CPU has a 'hard lockup' problem - * is to check it's local APIC timer IRQ counts. If they are not - * changing then that CPU has some problem. - * - * as these watchdog NMI IRQs are generated on every CPU, we only - * have to check the current processor. - */ - -static DEFINE_PER_CPU(unsigned, last_irq_sum); -static DEFINE_PER_CPU(local_t, alert_counter); -static DEFINE_PER_CPU(int, nmi_touch); - -void touch_nmi_watchdog(void) -{ - if (nmi_watchdog > 0) { - unsigned cpu; - - /* - * Tell other CPUs to reset their alert counters. We cannot - * do it ourselves because the alert count increase is not - * atomic. - */ - for_each_present_cpu(cpu) { - if (per_cpu(nmi_touch, cpu) != 1) - per_cpu(nmi_touch, cpu) = 1; - } - } - - touch_softlockup_watchdog(); -} -EXPORT_SYMBOL(touch_nmi_watchdog); - -notrace __kprobes int -nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) -{ - unsigned int sum; - int touched = 0; - int cpu = smp_processor_id(); - int rc = 0; - - /* check for other users first */ - if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) - == NOTIFY_STOP) { - rc = 1; - touched = 1; - } - - sum = get_timer_irqs(cpu); - - if (__get_cpu_var(nmi_touch)) { - __get_cpu_var(nmi_touch) = 0; - touched = 1; - } - - if (cpu_isset(cpu, backtrace_mask)) { - static DEFINE_SPINLOCK(lock); /* Serialise the printks */ - - spin_lock(&lock); - printk("NMI backtrace for cpu %d\n", cpu); - dump_stack(); - spin_unlock(&lock); - cpu_clear(cpu, backtrace_mask); - } - - if (mce_in_progress()) - touched = 1; - - /* if the apic timer isn't firing, this cpu isn't doing much */ - if (!touched && __get_cpu_var(last_irq_sum) == sum) { - /* - * Ayiee, looks like this CPU is stuck ... - * wait a few IRQs (5 seconds) before doing the oops ... - */ - local_inc(&__get_cpu_var(alert_counter)); - if (local_read(&__get_cpu_var(alert_counter)) == 5*nmi_hz) - die_nmi("NMI Watchdog detected LOCKUP", - regs, panic_on_timeout); - } else { - __get_cpu_var(last_irq_sum) = sum; - local_set(&__get_cpu_var(alert_counter), 0); - } - - /* see if the nmi watchdog went off */ - if (!__get_cpu_var(wd_enabled)) - return rc; - switch (nmi_watchdog) { - case NMI_LOCAL_APIC: - rc |= lapic_wd_event(nmi_hz); - break; - case NMI_IO_APIC: - /* don't know how to accurately check for this. - * just assume it was a watchdog timer interrupt - * This matches the old behaviour. - */ - rc = 1; - break; - } - return rc; -} - -#ifdef CONFIG_SYSCTL - -static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu) -{ - unsigned char reason = get_nmi_reason(); - char buf[64]; - - sprintf(buf, "NMI received for unknown reason %02x\n", reason); - die_nmi(buf, regs, 1); /* Always panic here */ - return 0; -} - -/* - * proc handler for /proc/sys/kernel/nmi - */ -int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, - void __user *buffer, size_t *length, loff_t *ppos) -{ - int old_state; - - nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0; - old_state = nmi_watchdog_enabled; - proc_dointvec(table, write, file, buffer, length, ppos); - if (!!old_state == !!nmi_watchdog_enabled) - return 0; - - if (atomic_read(&nmi_active) < 0 || nmi_watchdog == NMI_DISABLED) { - printk( KERN_WARNING "NMI watchdog is permanently disabled\n"); - return -EIO; - } - - /* if nmi_watchdog is not set yet, then set it */ - nmi_watchdog_default(); - - if (nmi_watchdog == NMI_LOCAL_APIC) { - if (nmi_watchdog_enabled) - enable_lapic_nmi_watchdog(); - else - disable_lapic_nmi_watchdog(); - } else { - printk( KERN_WARNING - "NMI watchdog doesn't know what hardware to touch\n"); - return -EIO; - } - return 0; -} - -#endif - -int do_nmi_callback(struct pt_regs *regs, int cpu) -{ -#ifdef CONFIG_SYSCTL - if (unknown_nmi_panic) - return unknown_nmi_panic_callback(regs, cpu); -#endif - return 0; -} - -void __trigger_all_cpu_backtrace(void) -{ - int i; - - backtrace_mask = cpu_online_map; - /* Wait for up to 10 seconds for all CPUs to do the backtrace */ - for (i = 0; i < 10 * 1000; i++) { - if (cpus_empty(backtrace_mask)) - break; - mdelay(1); - } -} - -EXPORT_SYMBOL(nmi_active); -EXPORT_SYMBOL(nmi_watchdog); -- cgit v1.2.3 From 4b6011bc6ec71660859139ac8d28b7d0badd681c Mon Sep 17 00:00:00 2001 From: Sven Wegener Date: Sun, 25 May 2008 21:16:36 +0200 Subject: x86: Remove obsolete LOCK macro from include/asm-x86/atomic_64.h Commit d167a518 "[PATCH] x86_64: x86_64 version of the smp alternative patch." has left the LOCK macro in include/asm-x86_64/atomic.h, which is now include/asm-x86/atomic_64.h. Its scope should be local to the file, other architectures don't provide it, I couldn't find an in-tree user of it and allyesconfig, allmodconfig and allnoconfig build fine without it, so this patch removes it. Signed-off-by: Sven Wegener Signed-off-by: Thomas Gleixner --- include/asm-x86/atomic_64.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/include/asm-x86/atomic_64.h b/include/asm-x86/atomic_64.h index 3e0cd7d38335..fe589c153db8 100644 --- a/include/asm-x86/atomic_64.h +++ b/include/asm-x86/atomic_64.h @@ -11,12 +11,6 @@ * resource counting etc.. */ -#ifdef CONFIG_SMP -#define LOCK "lock ; " -#else -#define LOCK "" -#endif - /* * Make sure gcc doesn't try to be clever and move things around * on us. We need to use _exactly_ the address the user gave us, -- cgit v1.2.3 From 1a20d3ecf5c2a6435df2b756435b1eb1c657d45b Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 26 May 2008 13:36:53 -0700 Subject: x86: string_32.h: workaround for broken gcc 4.0 gcc 4.0 fails to allocate %eax for the pattern operand in the rep store instructions used by memset; force it to do so by declaring a register variable. Signed-off-by: H. Peter Anvin --- include/asm-x86/string_32.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/include/asm-x86/string_32.h b/include/asm-x86/string_32.h index 8d0c593c4413..193578cd1fd9 100644 --- a/include/asm-x86/string_32.h +++ b/include/asm-x86/string_32.h @@ -267,11 +267,18 @@ void *__constant_c_and_count_memset(void *s, unsigned long pattern, asm volatile("rep ; stosl" \ x \ : "=&c" (d0), "=&D" (d1) \ - : "a" (pattern), "0" (count/4), "1" ((long)s) \ + : "a" (eax), "0" (count/4), "1" ((long)s) \ : "memory") { int d0, d1; +#if __GNUC__ == 4 && __GNUC_MINOR__ == 0 + /* Workaround for broken gcc 4.0 */ + register unsigned long eax asm("%eax") = pattern; +#else + unsigned long eax = pattern; +#endif + switch (count % 4) { case 0: COMMON(""); -- cgit v1.2.3 From 19384c0314342222b18d4c7f09cdce1ca74dfd2a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 22 May 2008 00:22:16 -0400 Subject: ftrace: limit use of check pages The check_pages function is called often enough that it can cause problems with trace outputs or even bringing the system to a halt. This patch limits the check_pages to the places that are most likely to have problems. The check is made at the flip between the global array and the max save array, as well as when the size of the buffers changes and the self tests. This patch also removes the BUG_ON from check_pages and replaces it with a WARN_ON and disabling of the tracer. Signed-off-by: Steven Rostedt Cc: pq@iki.fi Cc: proski@gnu.org Cc: sandmann@redhat.com Cc: a.p.zijlstra@chello.nl Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 32 +++++++++++++++++++++++--------- kernel/trace/trace_selftest.c | 1 + 2 files changed, 24 insertions(+), 9 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 3271916ff033..0567f51bbea4 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -249,24 +249,32 @@ __update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu) tracing_record_cmdline(current); } +#define CHECK_COND(cond) \ + if (unlikely(cond)) { \ + tracing_disabled = 1; \ + WARN_ON(1); \ + return -1; \ + } + /** * check_pages - integrity check of trace buffers * * As a safty measure we check to make sure the data pages have not - * been corrupted. TODO: configure to disable this because it adds - * a bit of overhead. + * been corrupted. */ -void check_pages(struct trace_array_cpu *data) +int check_pages(struct trace_array_cpu *data) { struct page *page, *tmp; - BUG_ON(data->trace_pages.next->prev != &data->trace_pages); - BUG_ON(data->trace_pages.prev->next != &data->trace_pages); + CHECK_COND(data->trace_pages.next->prev != &data->trace_pages); + CHECK_COND(data->trace_pages.prev->next != &data->trace_pages); list_for_each_entry_safe(page, tmp, &data->trace_pages, lru) { - BUG_ON(page->lru.next->prev != &page->lru); - BUG_ON(page->lru.prev->next != &page->lru); + CHECK_COND(page->lru.next->prev != &page->lru); + CHECK_COND(page->lru.prev->next != &page->lru); } + + return 0; } /** @@ -280,7 +288,6 @@ void *head_page(struct trace_array_cpu *data) { struct page *page; - check_pages(data); if (list_empty(&data->trace_pages)) return NULL; @@ -2566,7 +2573,7 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, { unsigned long val; char buf[64]; - int ret; + int i, ret; if (cnt >= sizeof(buf)) return -EINVAL; @@ -2635,8 +2642,15 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, trace_free_page(); } + /* check integrity */ + for_each_tracing_cpu(i) + check_pages(global_trace.data[i]); + filp->f_pos += cnt; + /* If check pages failed, return ENOMEM */ + if (tracing_disabled) + cnt = -ENOMEM; out: max_tr.entries = global_trace.entries; mutex_unlock(&trace_types_lock); diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c index 3877dd9102f1..18c5423bc977 100644 --- a/kernel/trace/trace_selftest.c +++ b/kernel/trace/trace_selftest.c @@ -28,6 +28,7 @@ trace_test_buffer_cpu(struct trace_array *tr, struct trace_array_cpu *data) page = list_entry(data->trace_pages.next, struct page, lru); entries = page_address(page); + check_pages(data); if (head_page(data) != entries) goto failed; -- cgit v1.2.3 From 4902f8849da6d2805bd291551a6dfd48f1b4f604 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 22 May 2008 00:22:18 -0400 Subject: ftrace: move ftrace_special to trace.c Move the ftrace_special out of sched_switch to trace.c. Signed-off-by: Steven Rostedt Cc: pq@iki.fi Cc: proski@gnu.org Cc: sandmann@redhat.com Cc: a.p.zijlstra@chello.nl Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 27 +++++++++++++++++++++++++-- kernel/trace/trace_sched_switch.c | 24 ------------------------ 2 files changed, 25 insertions(+), 26 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 0567f51bbea4..583fe24903d3 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -941,6 +941,30 @@ tracing_sched_wakeup_trace(struct trace_array *tr, trace_wake_up(); } +void +ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) +{ + struct trace_array *tr = &global_trace; + struct trace_array_cpu *data; + unsigned long flags; + long disabled; + int cpu; + + if (tracing_disabled || current_trace == &no_tracer || !tr->ctrl) + return; + + local_irq_save(flags); + cpu = raw_smp_processor_id(); + data = tr->data[cpu]; + disabled = atomic_inc_return(&data->disabled); + + if (likely(disabled == 1)) + __trace_special(tr, data, arg1, arg2, arg3); + + atomic_dec(&data->disabled); + local_irq_restore(flags); +} + #ifdef CONFIG_FTRACE static void function_trace_call(unsigned long ip, unsigned long parent_ip) @@ -2941,8 +2965,6 @@ __init static int tracer_alloc_buffers(void) int ret = -ENOMEM; int i; - global_trace.ctrl = tracer_enabled; - /* TODO: make the number of buffers hot pluggable with CPUS */ tracing_nr_buffers = num_possible_cpus(); tracing_buffer_mask = cpu_possible_map; @@ -3012,6 +3034,7 @@ __init static int tracer_alloc_buffers(void) current_trace = &no_tracer; /* All seems OK, enable tracing */ + global_trace.ctrl = tracer_enabled; tracing_disabled = 0; return 0; diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index d25ffa5eaf2b..798ec0dc863c 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -125,30 +125,6 @@ wake_up_callback(void *probe_data, void *call_data, wakeup_func(probe_data, __rq, task, curr); } -void -ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) -{ - struct trace_array *tr = ctx_trace; - struct trace_array_cpu *data; - unsigned long flags; - long disabled; - int cpu; - - if (!tracer_enabled) - return; - - local_irq_save(flags); - cpu = raw_smp_processor_id(); - data = tr->data[cpu]; - disabled = atomic_inc_return(&data->disabled); - - if (likely(disabled == 1)) - __trace_special(tr, data, arg1, arg2, arg3); - - atomic_dec(&data->disabled); - local_irq_restore(flags); -} - static void sched_switch_reset(struct trace_array *tr) { int cpu; -- cgit v1.2.3 From 7e18d8e701b6798a5df11e0a16881a60ab1018b6 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 22 May 2008 00:22:19 -0400 Subject: ftrace: add function tracing to wake up tracing This patch adds function tracing to the functions that are called on the CPU of the task being traced. Signed-off-by: Steven Rostedt Cc: pq@iki.fi Cc: proski@gnu.org Cc: sandmann@redhat.com Cc: a.p.zijlstra@chello.nl Signed-off-by: Thomas Gleixner --- kernel/trace/trace_sched_wakeup.c | 67 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 66 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 5d2fb48e47f8..bf7e91caef57 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -30,6 +30,69 @@ static DEFINE_SPINLOCK(wakeup_lock); static void __wakeup_reset(struct trace_array *tr); +#ifdef CONFIG_FTRACE +/* + * irqsoff uses its own tracer function to keep the overhead down: + */ +static void +wakeup_tracer_call(unsigned long ip, unsigned long parent_ip) +{ + struct trace_array *tr = wakeup_trace; + struct trace_array_cpu *data; + unsigned long flags; + long disabled; + int resched; + int cpu; + + if (likely(!wakeup_task)) + return; + + resched = need_resched(); + preempt_disable_notrace(); + + cpu = raw_smp_processor_id(); + data = tr->data[cpu]; + disabled = atomic_inc_return(&data->disabled); + if (unlikely(disabled != 1)) + goto out; + + spin_lock_irqsave(&wakeup_lock, flags); + + if (unlikely(!wakeup_task)) + goto unlock; + + /* + * The task can't disappear because it needs to + * wake up first, and we have the wakeup_lock. + */ + if (task_cpu(wakeup_task) != cpu) + goto unlock; + + trace_function(tr, data, ip, parent_ip, flags); + + unlock: + spin_unlock_irqrestore(&wakeup_lock, flags); + + out: + atomic_dec(&data->disabled); + + /* + * To prevent recursion from the scheduler, if the + * resched flag was set before we entered, then + * don't reschedule. + */ + if (resched) + preempt_enable_no_resched_notrace(); + else + preempt_enable_notrace(); +} + +static struct ftrace_ops trace_ops __read_mostly = +{ + .func = wakeup_tracer_call, +}; +#endif /* CONFIG_FTRACE */ + /* * Should this new latency be reported/recorded? */ @@ -73,7 +136,7 @@ wakeup_sched_switch(void *private, void *rq, struct task_struct *prev, if (next != wakeup_task) return; - /* The task we are waitng for is waking up */ + /* The task we are waiting for is waking up */ data = tr->data[wakeup_cpu]; /* disable local data, not wakeup_cpu data */ @@ -290,6 +353,7 @@ static void start_wakeup_tracer(struct trace_array *tr) smp_wmb(); tracer_enabled = 1; + register_ftrace_function(&trace_ops); return; fail_deprobe_wake_new: @@ -305,6 +369,7 @@ fail_deprobe: static void stop_wakeup_tracer(struct trace_array *tr) { tracer_enabled = 0; + unregister_ftrace_function(&trace_ops); marker_probe_unregister("kernel_sched_schedule", sched_switch_callback, &wakeup_trace); -- cgit v1.2.3 From da89a7a2536c46e76a1a4351a70a8b8417e5fed1 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 22 May 2008 00:22:20 -0400 Subject: ftrace: remove printks from irqsoff trace Printing out new max latencies was fine for the old RT tracer. But for mainline it is a bit messy. We also need to test if the run queue is locked before we can do the print. This means that we may not be printing out latencies if the run queue is locked on another CPU. This produces inconsistencies in the output. This patch simply removes the print altogether. Signed-off-by: Steven Rostedt Cc: pq@iki.fi Cc: proski@gnu.org Cc: sandmann@redhat.com Cc: a.p.zijlstra@chello.nl Signed-off-by: Thomas Gleixner --- kernel/trace/trace_irqsoff.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index 761f3ec66c50..421d6fe3650e 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -165,22 +165,6 @@ check_critical_timing(struct trace_array *tr, update_max_tr_single(tr, current, cpu); - if (!runqueue_is_locked()) { - if (tracing_thresh) { - printk(KERN_INFO "(%16s-%-5d|#%d): %lu us critical" - " section violates %lu us threshold.\n", - current->comm, current->pid, - raw_smp_processor_id(), - latency, nsecs_to_usecs(tracing_thresh)); - } else { - printk(KERN_INFO "(%16s-%-5d|#%d): new %lu us" - " maximum-latency critical section.\n", - current->comm, current->pid, - raw_smp_processor_id(), - latency); - } - } - max_sequence++; out_unlock: -- cgit v1.2.3 From 41c52c0db9607e59f90da7da5309489fa06e887f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 22 May 2008 11:46:33 -0400 Subject: ftrace: set_ftrace_notrace feature While debugging latencies in the RT kernel, I found that it would be nice to be able to filter away functions from the trace than just to filter on functions. I added a new interface to the debugfs tracing directory called set_ftrace_notrace When dynamic frace is enabled, this lets you filter away functions that will not be recorded in the trace. It is similar to adding 'notrace' to those functions but by doing it without recompiling the kernel. Here's how set_ftrace_filter and set_ftrace_notrace interact. Remember, if set_ftrace_filter is set, it removes all functions from the trace execpt for those listed in the set_ftrace_filter. set_ftrace_notrace will prevent those functions from being traced. If you were to set one function in both set_ftrace_filter and set_ftrace_notrace and that function was the same, then you would end up with an empty trace. the set of functions to trace is: set_ftrace_filter == empty then all functions not in set_ftrace_notrace else set of the set_ftrace_filter and not in set of set_ftrace_notrace. Signed-off-by: Steven Rostedt Signed-off-by: Thomas Gleixner --- include/linux/ftrace.h | 1 + kernel/trace/ftrace.c | 170 +++++++++++++++++++++++++++++++++++++------------ 2 files changed, 131 insertions(+), 40 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 922e23d0196f..ffbbd54a720e 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -48,6 +48,7 @@ enum { FTRACE_FL_FAILED = (1 << 1), FTRACE_FL_FILTER = (1 << 2), FTRACE_FL_ENABLED = (1 << 3), + FTRACE_FL_NOTRACE = (1 << 4), }; struct dyn_ftrace { diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 89bd9a6f52ec..2552454609cf 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -170,7 +170,7 @@ static DEFINE_PER_CPU(int, ftrace_shutdown_disable_cpu); static DEFINE_SPINLOCK(ftrace_shutdown_lock); static DEFINE_MUTEX(ftraced_lock); -static DEFINE_MUTEX(ftrace_filter_lock); +static DEFINE_MUTEX(ftrace_regex_lock); struct ftrace_page { struct ftrace_page *next; @@ -337,13 +337,12 @@ static void __ftrace_replace_code(struct dyn_ftrace *rec, unsigned char *old, unsigned char *new, int enable) { - unsigned long ip; + unsigned long ip, fl; int failed; ip = rec->ip; if (ftrace_filtered && enable) { - unsigned long fl; /* * If filtering is on: * @@ -356,13 +355,16 @@ __ftrace_replace_code(struct dyn_ftrace *rec, * If this record is not set to be filtered * and it is not enabled do nothing. * + * If this record is set not to trace then + * do nothing. + * * If this record is not set to be filtered and * it is enabled, disable it. */ fl = rec->flags & (FTRACE_FL_FILTER | FTRACE_FL_ENABLED); if ((fl == (FTRACE_FL_FILTER | FTRACE_FL_ENABLED)) || - (fl == 0)) + (fl == 0) || (rec->flags & FTRACE_FL_NOTRACE)) return; /* @@ -380,9 +382,17 @@ __ftrace_replace_code(struct dyn_ftrace *rec, } } else { - if (enable) + if (enable) { + /* + * If this record is set not to trace and is + * not enabled, do nothing. + */ + fl = rec->flags & (FTRACE_FL_NOTRACE | FTRACE_FL_ENABLED); + if (fl == FTRACE_FL_NOTRACE) + return; + new = ftrace_call_replace(ip, FTRACE_ADDR); - else + } else old = ftrace_call_replace(ip, FTRACE_ADDR); if (enable) { @@ -721,6 +731,7 @@ static int __init ftrace_dyn_table_alloc(void) enum { FTRACE_ITER_FILTER = (1 << 0), FTRACE_ITER_CONT = (1 << 1), + FTRACE_ITER_NOTRACE = (1 << 2), }; #define FTRACE_BUFF_MAX (KSYM_SYMBOL_LEN+4) /* room for wildcards */ @@ -754,7 +765,9 @@ t_next(struct seq_file *m, void *v, loff_t *pos) rec = &iter->pg->records[iter->idx++]; if ((rec->flags & FTRACE_FL_FAILED) || ((iter->flags & FTRACE_ITER_FILTER) && - !(rec->flags & FTRACE_FL_FILTER))) { + !(rec->flags & FTRACE_FL_FILTER)) || + ((iter->flags & FTRACE_ITER_NOTRACE) && + !(rec->flags & FTRACE_FL_NOTRACE))) { rec = NULL; goto retry; } @@ -847,22 +860,24 @@ int ftrace_avail_release(struct inode *inode, struct file *file) return 0; } -static void ftrace_filter_reset(void) +static void ftrace_filter_reset(int enable) { struct ftrace_page *pg; struct dyn_ftrace *rec; + unsigned long type = enable ? FTRACE_FL_FILTER : FTRACE_FL_NOTRACE; unsigned i; /* keep kstop machine from running */ preempt_disable(); - ftrace_filtered = 0; + if (enable) + ftrace_filtered = 0; pg = ftrace_pages_start; while (pg) { for (i = 0; i < pg->index; i++) { rec = &pg->records[i]; if (rec->flags & FTRACE_FL_FAILED) continue; - rec->flags &= ~FTRACE_FL_FILTER; + rec->flags &= ~type; } pg = pg->next; } @@ -870,7 +885,7 @@ static void ftrace_filter_reset(void) } static int -ftrace_filter_open(struct inode *inode, struct file *file) +ftrace_regex_open(struct inode *inode, struct file *file, int enable) { struct ftrace_iterator *iter; int ret = 0; @@ -882,15 +897,16 @@ ftrace_filter_open(struct inode *inode, struct file *file) if (!iter) return -ENOMEM; - mutex_lock(&ftrace_filter_lock); + mutex_lock(&ftrace_regex_lock); if ((file->f_mode & FMODE_WRITE) && !(file->f_flags & O_APPEND)) - ftrace_filter_reset(); + ftrace_filter_reset(enable); if (file->f_mode & FMODE_READ) { iter->pg = ftrace_pages_start; iter->pos = -1; - iter->flags = FTRACE_ITER_FILTER; + iter->flags = enable ? FTRACE_ITER_FILTER : + FTRACE_ITER_NOTRACE; ret = seq_open(file, &show_ftrace_seq_ops); if (!ret) { @@ -900,13 +916,25 @@ ftrace_filter_open(struct inode *inode, struct file *file) kfree(iter); } else file->private_data = iter; - mutex_unlock(&ftrace_filter_lock); + mutex_unlock(&ftrace_regex_lock); return ret; } +static int +ftrace_filter_open(struct inode *inode, struct file *file) +{ + return ftrace_regex_open(inode, file, 1); +} + +static int +ftrace_notrace_open(struct inode *inode, struct file *file) +{ + return ftrace_regex_open(inode, file, 0); +} + static ssize_t -ftrace_filter_read(struct file *file, char __user *ubuf, +ftrace_regex_read(struct file *file, char __user *ubuf, size_t cnt, loff_t *ppos) { if (file->f_mode & FMODE_READ) @@ -916,7 +944,7 @@ ftrace_filter_read(struct file *file, char __user *ubuf, } static loff_t -ftrace_filter_lseek(struct file *file, loff_t offset, int origin) +ftrace_regex_lseek(struct file *file, loff_t offset, int origin) { loff_t ret; @@ -936,13 +964,14 @@ enum { }; static void -ftrace_match(unsigned char *buff, int len) +ftrace_match(unsigned char *buff, int len, int enable) { char str[KSYM_SYMBOL_LEN]; char *search = NULL; struct ftrace_page *pg; struct dyn_ftrace *rec; int type = MATCH_FULL; + unsigned long flag = enable ? FTRACE_FL_FILTER : FTRACE_FL_NOTRACE; unsigned i, match = 0, search_len = 0; for (i = 0; i < len; i++) { @@ -966,7 +995,8 @@ ftrace_match(unsigned char *buff, int len) /* keep kstop machine from running */ preempt_disable(); - ftrace_filtered = 1; + if (enable) + ftrace_filtered = 1; pg = ftrace_pages_start; while (pg) { for (i = 0; i < pg->index; i++) { @@ -997,7 +1027,7 @@ ftrace_match(unsigned char *buff, int len) break; } if (matched) - rec->flags |= FTRACE_FL_FILTER; + rec->flags |= flag; } pg = pg->next; } @@ -1005,8 +1035,8 @@ ftrace_match(unsigned char *buff, int len) } static ssize_t -ftrace_filter_write(struct file *file, const char __user *ubuf, - size_t cnt, loff_t *ppos) +ftrace_regex_write(struct file *file, const char __user *ubuf, + size_t cnt, loff_t *ppos, int enable) { struct ftrace_iterator *iter; char ch; @@ -1016,7 +1046,7 @@ ftrace_filter_write(struct file *file, const char __user *ubuf, if (!cnt || cnt < 0) return 0; - mutex_lock(&ftrace_filter_lock); + mutex_lock(&ftrace_regex_lock); if (file->f_mode & FMODE_READ) { struct seq_file *m = file->private_data; @@ -1045,7 +1075,6 @@ ftrace_filter_write(struct file *file, const char __user *ubuf, cnt--; } - if (isspace(ch)) { file->f_pos += read; ret = read; @@ -1072,7 +1101,7 @@ ftrace_filter_write(struct file *file, const char __user *ubuf, if (isspace(ch)) { iter->filtered++; iter->buffer[iter->buffer_idx] = 0; - ftrace_match(iter->buffer, iter->buffer_idx); + ftrace_match(iter->buffer, iter->buffer_idx, enable); iter->buffer_idx = 0; } else iter->flags |= FTRACE_ITER_CONT; @@ -1082,11 +1111,39 @@ ftrace_filter_write(struct file *file, const char __user *ubuf, ret = read; out: - mutex_unlock(&ftrace_filter_lock); + mutex_unlock(&ftrace_regex_lock); return ret; } +static ssize_t +ftrace_filter_write(struct file *file, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + return ftrace_regex_write(file, ubuf, cnt, ppos, 1); +} + +static ssize_t +ftrace_notrace_write(struct file *file, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + return ftrace_regex_write(file, ubuf, cnt, ppos, 0); +} + +static void +ftrace_set_regex(unsigned char *buf, int len, int reset, int enable) +{ + if (unlikely(ftrace_disabled)) + return; + + mutex_lock(&ftrace_regex_lock); + if (reset) + ftrace_filter_reset(enable); + if (buf) + ftrace_match(buf, len, enable); + mutex_unlock(&ftrace_regex_lock); +} + /** * ftrace_set_filter - set a function to filter on in ftrace * @buf - the string that holds the function filter text. @@ -1098,24 +1155,31 @@ ftrace_filter_write(struct file *file, const char __user *ubuf, */ void ftrace_set_filter(unsigned char *buf, int len, int reset) { - if (unlikely(ftrace_disabled)) - return; + ftrace_set_regex(buf, len, reset, 1); +} - mutex_lock(&ftrace_filter_lock); - if (reset) - ftrace_filter_reset(); - if (buf) - ftrace_match(buf, len); - mutex_unlock(&ftrace_filter_lock); +/** + * ftrace_set_notrace - set a function to not trace in ftrace + * @buf - the string that holds the function notrace text. + * @len - the length of the string. + * @reset - non zero to reset all filters before applying this filter. + * + * Notrace Filters denote which functions should not be enabled when tracing + * is enabled. If @buf is NULL and reset is set, all functions will be enabled + * for tracing. + */ +void ftrace_set_notrace(unsigned char *buf, int len, int reset) +{ + ftrace_set_regex(buf, len, reset, 0); } static int -ftrace_filter_release(struct inode *inode, struct file *file) +ftrace_regex_release(struct inode *inode, struct file *file, int enable) { struct seq_file *m = (struct seq_file *)file->private_data; struct ftrace_iterator *iter; - mutex_lock(&ftrace_filter_lock); + mutex_lock(&ftrace_regex_lock); if (file->f_mode & FMODE_READ) { iter = m->private; @@ -1126,7 +1190,7 @@ ftrace_filter_release(struct inode *inode, struct file *file) if (iter->buffer_idx) { iter->filtered++; iter->buffer[iter->buffer_idx] = 0; - ftrace_match(iter->buffer, iter->buffer_idx); + ftrace_match(iter->buffer, iter->buffer_idx, enable); } mutex_lock(&ftrace_sysctl_lock); @@ -1137,10 +1201,22 @@ ftrace_filter_release(struct inode *inode, struct file *file) mutex_unlock(&ftrace_sysctl_lock); kfree(iter); - mutex_unlock(&ftrace_filter_lock); + mutex_unlock(&ftrace_regex_lock); return 0; } +static int +ftrace_filter_release(struct inode *inode, struct file *file) +{ + return ftrace_regex_release(inode, file, 1); +} + +static int +ftrace_notrace_release(struct inode *inode, struct file *file) +{ + return ftrace_regex_release(inode, file, 0); +} + static struct file_operations ftrace_avail_fops = { .open = ftrace_avail_open, .read = seq_read, @@ -1150,12 +1226,20 @@ static struct file_operations ftrace_avail_fops = { static struct file_operations ftrace_filter_fops = { .open = ftrace_filter_open, - .read = ftrace_filter_read, + .read = ftrace_regex_read, .write = ftrace_filter_write, - .llseek = ftrace_filter_lseek, + .llseek = ftrace_regex_lseek, .release = ftrace_filter_release, }; +static struct file_operations ftrace_notrace_fops = { + .open = ftrace_notrace_open, + .read = ftrace_regex_read, + .write = ftrace_notrace_write, + .llseek = ftrace_regex_lseek, + .release = ftrace_notrace_release, +}; + /** * ftrace_force_update - force an update to all recording ftrace functions * @@ -1239,6 +1323,12 @@ static __init int ftrace_init_debugfs(void) if (!entry) pr_warning("Could not create debugfs " "'set_ftrace_filter' entry\n"); + + entry = debugfs_create_file("set_ftrace_notrace", 0644, d_tracer, + NULL, &ftrace_notrace_fops); + if (!entry) + pr_warning("Could not create debugfs " + "'set_ftrace_notrace' entry\n"); return 0; } -- cgit v1.2.3 From 41bc8144d02028133bcd1d545023c6f49e8b2411 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 22 May 2008 11:49:22 -0400 Subject: ftrace: fix up cmdline recording The new work with converting the trace hooks over to markers broke the command line recording of ftrace. This patch fixes it again. Signed-off-by: Steven Rostedt Cc: Peter Zijlstra Cc: Mathieu Desnoyers Signed-off-by: Thomas Gleixner --- kernel/trace/trace.c | 3 --- kernel/trace/trace.h | 4 ++-- kernel/trace/trace_functions.c | 4 ++-- kernel/trace/trace_sched_switch.c | 21 +++++++++++++++------ 4 files changed, 19 insertions(+), 13 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 583fe24903d3..0feae23d9893 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -652,9 +652,6 @@ static char saved_cmdlines[SAVED_CMDLINES][TASK_COMM_LEN]; static int cmdline_idx; static DEFINE_SPINLOCK(trace_cmdline_lock); -/* trace in all context switches */ -atomic_t trace_record_cmdline_enabled __read_mostly; - /* temporary disable recording */ atomic_t trace_record_cmdline_disabled __read_mostly; diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index c460e85e94ed..6b8bd8800d04 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -218,6 +218,8 @@ void trace_function(struct trace_array *tr, void tracing_start_function_trace(void); void tracing_stop_function_trace(void); +void tracing_start_cmdline_record(void); +void tracing_stop_cmdline_record(void); int register_tracer(struct tracer *type); void unregister_tracer(struct tracer *type); @@ -226,8 +228,6 @@ extern unsigned long nsecs_to_usecs(unsigned long nsecs); extern unsigned long tracing_max_latency; extern unsigned long tracing_thresh; -extern atomic_t trace_record_cmdline_enabled; - void update_max_tr(struct trace_array *tr, struct task_struct *tsk, int cpu); void update_max_tr_single(struct trace_array *tr, struct task_struct *tsk, int cpu); diff --git a/kernel/trace/trace_functions.c b/kernel/trace/trace_functions.c index 0a084656d7cf..7ee7dcd76b7d 100644 --- a/kernel/trace/trace_functions.c +++ b/kernel/trace/trace_functions.c @@ -29,14 +29,14 @@ static void function_reset(struct trace_array *tr) static void start_function_trace(struct trace_array *tr) { function_reset(tr); - atomic_inc(&trace_record_cmdline_enabled); + tracing_start_cmdline_record(); tracing_start_function_trace(); } static void stop_function_trace(struct trace_array *tr) { tracing_stop_function_trace(); - atomic_dec(&trace_record_cmdline_enabled); + tracing_stop_cmdline_record(); } static void function_trace_init(struct trace_array *tr) diff --git a/kernel/trace/trace_sched_switch.c b/kernel/trace/trace_sched_switch.c index 798ec0dc863c..c16935d3bc5c 100644 --- a/kernel/trace/trace_sched_switch.c +++ b/kernel/trace/trace_sched_switch.c @@ -29,6 +29,9 @@ sched_switch_func(void *private, void *__rq, struct task_struct *prev, long disabled; int cpu; + tracing_record_cmdline(prev); + tracing_record_cmdline(next); + if (!tracer_enabled) return; @@ -63,8 +66,6 @@ sched_switch_callback(void *probe_data, void *call_data, prev = va_arg(*args, typeof(prev)); next = va_arg(*args, typeof(next)); - tracing_record_cmdline(prev); - /* * If tracer_switch_func only points to the local * switch func, it still needs the ptr passed to it. @@ -213,18 +214,26 @@ void tracing_stop_sched_switch(void) tracing_sched_unregister(); } +void tracing_start_cmdline_record(void) +{ + tracing_start_sched_switch(); +} + +void tracing_stop_cmdline_record(void) +{ + tracing_stop_sched_switch(); +} + static void start_sched_trace(struct trace_array *tr) { sched_switch_reset(tr); - atomic_inc(&trace_record_cmdline_enabled); tracer_enabled = 1; - tracing_start_sched_switch(); + tracing_start_cmdline_record(); } static void stop_sched_trace(struct trace_array *tr) { - tracing_stop_sched_switch(); - atomic_dec(&trace_record_cmdline_enabled); + tracing_stop_cmdline_record(); tracer_enabled = 0; } -- cgit v1.2.3 From ccbfac2923c9febaeaf07a50054027a92b502718 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 22 May 2008 14:31:07 -0400 Subject: ftrace: powerpc clean ups This patch cleans up the ftrace code in PowerPC based on the comments from Michael Ellerman. Signed-off-by: Steven Rostedt Cc: Michael Ellerman Cc: proski@gnu.org Cc: a.p.zijlstra@chello.nl Cc: Pekka Paalanen Cc: Steven Rostedt Cc: linuxppc-dev@ozlabs.org Cc: Soeren Sandmann Pedersen Cc: paulus@samba.org Signed-off-by: Thomas Gleixner --- arch/powerpc/kernel/entry_32.S | 11 ++--------- arch/powerpc/kernel/ftrace.c | 8 +++++++- arch/powerpc/kernel/ppc_ksyms.c | 5 +++++ arch/powerpc/kernel/setup_32.c | 5 ----- arch/powerpc/kernel/setup_64.c | 5 ----- include/asm-powerpc/ftrace.h | 6 ++++++ 6 files changed, 20 insertions(+), 20 deletions(-) create mode 100644 include/asm-powerpc/ftrace.h diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 0e6221889ca9..3b1dd29d9f91 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -1129,18 +1129,11 @@ _GLOBAL(_mcount) stw r5, 8(r1) LOAD_REG_ADDR(r5, ftrace_trace_function) -#if 0 - mtctr r3 - mr r1, r5 - bctrl -#endif lwz r5,0(r5) -#if 1 + mtctr r5 bctrl -#else - bl ftrace_stub -#endif + nop lwz r6, 8(r1) diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 5a4993fefa45..69ed41223468 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -51,10 +51,16 @@ notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) { static unsigned int op; + /* + * It would be nice to just use create_function_call, but that will + * update the code itself. Here we need to just return the + * instruction that is going to be modified, without modifying the + * code. + */ addr = GET_ADDR(addr); /* Set to "bl addr" */ - op = 0x48000001 | (ftrace_calc_offset(ip, addr) & 0x03fffffe); + op = 0x48000001 | (ftrace_calc_offset(ip, addr) & 0x03fffffc); /* * No locking needed, this must be called via kstop_machine diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index cf6b5a7d8b3f..4300db52662a 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -43,6 +43,7 @@ #include #include #include +#include #ifdef CONFIG_PPC32 extern void transfer_to_handler(void); @@ -68,6 +69,10 @@ EXPORT_SYMBOL(single_step_exception); EXPORT_SYMBOL(sys_sigreturn); #endif +#ifdef CONFIG_FTRACE +EXPORT_SYMBOL(_mcount); +#endif + EXPORT_SYMBOL(strcpy); EXPORT_SYMBOL(strncpy); EXPORT_SYMBOL(strcat); diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 22f8e2bacd32..19e8fcb9cea8 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -47,11 +47,6 @@ #include #endif -#ifdef CONFIG_FTRACE -extern void _mcount(void); -EXPORT_SYMBOL(_mcount); -#endif - extern void bootx_init(unsigned long r4, unsigned long phys); int boot_cpuid; diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 277bf18cbbcc..098fd96a394a 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -85,11 +85,6 @@ struct ppc64_caches ppc64_caches = { }; EXPORT_SYMBOL_GPL(ppc64_caches); -#ifdef CONFIG_FTRACE -extern void _mcount(void); -EXPORT_SYMBOL(_mcount); -#endif - /* * These are used in binfmt_elf.c to put aux entries on the stack * for each elf executable being started. diff --git a/include/asm-powerpc/ftrace.h b/include/asm-powerpc/ftrace.h new file mode 100644 index 000000000000..b1bfa704b6e5 --- /dev/null +++ b/include/asm-powerpc/ftrace.h @@ -0,0 +1,6 @@ +#ifndef _ASM_POWERPC_FTRACE +#define _ASM_POWERPC_FTRACE + +extern void _mcount(void); + +#endif -- cgit v1.2.3 From ffdaa3582b6b39d625d585d07e329ffdc925e971 Mon Sep 17 00:00:00 2001 From: Abhishek Sagar Date: Sat, 24 May 2008 23:45:02 +0530 Subject: ftrace: safe traversal of ftrace_hash hlist Hi Steven, I noticed that concurrent instances of ftrace_record_ip() have a race between ftrace_hash list traversal during ftrace_ip_in_hash() (before acquiring ftrace_shutdown_lock) and ftrace_add_hash(). If it's so then this should fix it. Signed-off-by: Abhishek Sagar Cc: rostedt@goodmis.org Signed-off-by: Thomas Gleixner --- kernel/trace/ftrace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 2552454609cf..9b7c54f8a62f 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -201,7 +201,7 @@ ftrace_ip_in_hash(unsigned long ip, unsigned long key) struct hlist_node *t; int found = 0; - hlist_for_each_entry(p, t, &ftrace_hash[key], node) { + hlist_for_each_entry_rcu(p, t, &ftrace_hash[key], node) { if (p->ip == ip) { found = 1; break; @@ -214,7 +214,7 @@ ftrace_ip_in_hash(unsigned long ip, unsigned long key) static inline void ftrace_add_hash(struct dyn_ftrace *node, unsigned long key) { - hlist_add_head(&node->node, &ftrace_hash[key]); + hlist_add_head_rcu(&node->node, &ftrace_hash[key]); } static void ftrace_free_rec(struct dyn_ftrace *rec) -- cgit v1.2.3 From 492a7ea5bcf263ee02a9eb6a3ab0222a1946fade Mon Sep 17 00:00:00 2001 From: Abhishek Sagar Date: Sun, 25 May 2008 00:10:04 +0530 Subject: ftrace: fix updating of ftrace_update_cnt Hi Ingo/Steven, Ftrace currently maintains an update count which includes false updates, i.e, updates which failed. If anything, such failures should be tracked by some separate variable, but this patch provides a minimal fix. Signed-off-by: Abhishek Sagar Cc: rostedt@goodmis.org Signed-off-by: Thomas Gleixner --- kernel/trace/ftrace.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 9b7c54f8a62f..1843edc098a6 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -453,7 +453,7 @@ static void ftrace_shutdown_replenish(void) ftrace_pages->next = (void *)get_zeroed_page(GFP_KERNEL); } -static void +static int ftrace_code_disable(struct dyn_ftrace *rec) { unsigned long ip; @@ -469,7 +469,9 @@ ftrace_code_disable(struct dyn_ftrace *rec) if (failed) { rec->flags |= FTRACE_FL_FAILED; ftrace_free_rec(rec); + return 0; } + return 1; } static int __ftrace_modify_code(void *data) @@ -617,8 +619,8 @@ static int __ftrace_update_code(void *ignore) /* all CPUS are stopped, we are safe to modify code */ hlist_for_each_entry(p, t, &head, node) { - ftrace_code_disable(p); - ftrace_update_cnt++; + if (ftrace_code_disable(p)) + ftrace_update_cnt++; } } -- cgit v1.2.3 From d031476408ae0f5196e3c579f519dfdefb099b67 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 23 May 2008 14:41:19 +0100 Subject: hrtimer: remove warning in hres_timers_resume hres_timers_resume() warns if there appears to be more than one cpu online. This warning makes sense when the suspend/resume mechanism offlines all cpus but one during the suspend/resume process. However, Xen suspend does not need to offline the other cpus; it merely keeps them tied up in stop_machine() while the virtual machine is suspended. The warning hres_timers_resume issues is therefore spurious. Signed-off-by: Jeremy Fitzhardinge Cc: xen-devel Cc: "Rafael J. Wysocki" Signed-off-by: Thomas Gleixner --- kernel/hrtimer.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 421be5fe5cc7..493c4b8b8cba 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -632,8 +632,6 @@ void clock_was_set(void) */ void hres_timers_resume(void) { - WARN_ON_ONCE(num_online_cpus() > 1); - /* Retrigger the CPU local events: */ retrigger_next_event(NULL); } -- cgit v1.2.3 From 900cfa46191a7d87cf1891924cb90499287fd235 Mon Sep 17 00:00:00 2001 From: "Carlos R. Mafra" Date: Thu, 22 May 2008 19:25:11 -0300 Subject: hrtimer: Remove unused variables in ktime_divns() The variables dns and inc are not used, remove them. Signed-off-by: Carlos R. Mafra Cc: tglx@linutronix.de Signed-off-by: Thomas Gleixner --- kernel/hrtimer.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 493c4b8b8cba..635739d219da 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -300,11 +300,10 @@ EXPORT_SYMBOL_GPL(ktime_sub_ns); */ u64 ktime_divns(const ktime_t kt, s64 div) { - u64 dclc, inc, dns; + u64 dclc; int sft = 0; - dclc = dns = ktime_to_ns(kt); - inc = div; + dclc = ktime_to_ns(kt); /* Make sure the divisor is less than 2^32: */ while (div >> 32) { sft++; -- cgit v1.2.3 From 4226ab93d8ae3fd895abe45879fe34d489a98718 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:30:58 +0100 Subject: x86: use pteval_t for _PAGE_FOO Rather than making _PAGE_* constants signed, and then relying on sign-extension to make sure that masks derived from them are wide enough, just explicitly type them pteval_t. This guarantees that they and any derived values are the right size for the current pte format. The reliance on sign extension is fragile, and invokes some very subtle corners of the C type system. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- include/asm-x86/pgtable.h | 49 +++++++++++++++++++++-------------------------- 1 file changed, 22 insertions(+), 27 deletions(-) diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h index 97c271b2910b..fab3ecb54b68 100644 --- a/include/asm-x86/pgtable.h +++ b/include/asm-x86/pgtable.h @@ -20,30 +20,25 @@ #define _PAGE_BIT_PAT_LARGE 12 /* On 2MB or 1GB pages */ #define _PAGE_BIT_NX 63 /* No execute: only valid after cpuid check */ -/* - * Note: we use _AC(1, L) instead of _AC(1, UL) so that we get a - * sign-extended value on 32-bit with all 1's in the upper word, - * which preserves the upper pte values on 64-bit ptes: - */ -#define _PAGE_PRESENT (_AC(1, L)<<_PAGE_BIT_PRESENT) -#define _PAGE_RW (_AC(1, L)<<_PAGE_BIT_RW) -#define _PAGE_USER (_AC(1, L)<<_PAGE_BIT_USER) -#define _PAGE_PWT (_AC(1, L)<<_PAGE_BIT_PWT) -#define _PAGE_PCD (_AC(1, L)<<_PAGE_BIT_PCD) -#define _PAGE_ACCESSED (_AC(1, L)<<_PAGE_BIT_ACCESSED) -#define _PAGE_DIRTY (_AC(1, L)<<_PAGE_BIT_DIRTY) -#define _PAGE_PSE (_AC(1, L)<<_PAGE_BIT_PSE) /* 2MB page */ -#define _PAGE_GLOBAL (_AC(1, L)<<_PAGE_BIT_GLOBAL) /* Global TLB entry */ -#define _PAGE_UNUSED1 (_AC(1, L)<<_PAGE_BIT_UNUSED1) -#define _PAGE_UNUSED2 (_AC(1, L)<<_PAGE_BIT_UNUSED2) -#define _PAGE_UNUSED3 (_AC(1, L)<<_PAGE_BIT_UNUSED3) -#define _PAGE_PAT (_AC(1, L)<<_PAGE_BIT_PAT) -#define _PAGE_PAT_LARGE (_AC(1, L)<<_PAGE_BIT_PAT_LARGE) +#define _PAGE_PRESENT (_AT(pteval_t, 1) << _PAGE_BIT_PRESENT) +#define _PAGE_RW (_AT(pteval_t, 1) << _PAGE_BIT_RW) +#define _PAGE_USER (_AT(pteval_t, 1) << _PAGE_BIT_USER) +#define _PAGE_PWT (_AT(pteval_t, 1) << _PAGE_BIT_PWT) +#define _PAGE_PCD (_AT(pteval_t, 1) << _PAGE_BIT_PCD) +#define _PAGE_ACCESSED (_AT(pteval_t, 1) << _PAGE_BIT_ACCESSED) +#define _PAGE_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_DIRTY) +#define _PAGE_PSE (_AT(pteval_t, 1) << _PAGE_BIT_PSE) +#define _PAGE_GLOBAL (_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL) +#define _PAGE_UNUSED1 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1) +#define _PAGE_UNUSED2 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED2) +#define _PAGE_UNUSED3 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED3) +#define _PAGE_PAT (_AT(pteval_t, 1) << _PAGE_BIT_PAT) +#define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE) #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE) -#define _PAGE_NX (_AC(1, ULL) << _PAGE_BIT_NX) +#define _PAGE_NX (_AT(pteval_t, 1) << _PAGE_BIT_NX) #else -#define _PAGE_NX 0 +#define _PAGE_NX (_AT(pteval_t, 0)) #endif /* If _PAGE_PRESENT is clear, we use these: */ @@ -210,22 +205,22 @@ static inline int pmd_large(pmd_t pte) static inline pte_t pte_mkclean(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_DIRTY); + return __pte(pte_val(pte) & ~_PAGE_DIRTY); } static inline pte_t pte_mkold(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_ACCESSED); + return __pte(pte_val(pte) & ~_PAGE_ACCESSED); } static inline pte_t pte_wrprotect(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_RW); + return __pte(pte_val(pte) & ~_PAGE_RW); } static inline pte_t pte_mkexec(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_NX); + return __pte(pte_val(pte) & ~_PAGE_NX); } static inline pte_t pte_mkdirty(pte_t pte) @@ -250,7 +245,7 @@ static inline pte_t pte_mkhuge(pte_t pte) static inline pte_t pte_clrhuge(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_PSE); + return __pte(pte_val(pte) & ~_PAGE_PSE); } static inline pte_t pte_mkglobal(pte_t pte) @@ -260,7 +255,7 @@ static inline pte_t pte_mkglobal(pte_t pte) static inline pte_t pte_clrglobal(pte_t pte) { - return __pte(pte_val(pte) & ~(pteval_t)_PAGE_GLOBAL); + return __pte(pte_val(pte) & ~_PAGE_GLOBAL); } static inline pte_t pte_mkspecial(pte_t pte) -- cgit v1.2.3 From 4e09e21ccb0dfe7ee8d5641192e0072e83bd916b Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:03 +0100 Subject: x86: use symbolic constant in stts() Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- include/asm-x86/system.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-x86/system.h b/include/asm-x86/system.h index a2f04cd79b29..7e4c133795a1 100644 --- a/include/asm-x86/system.h +++ b/include/asm-x86/system.h @@ -289,7 +289,7 @@ static inline void native_wbinvd(void) #endif/* CONFIG_PARAVIRT */ -#define stts() write_cr0(8 | read_cr0()) +#define stts() write_cr0(read_cr0() | X86_CR0_TS) #endif /* __KERNEL__ */ -- cgit v1.2.3 From 0acf10d8fbd52926217d3933d196b33fe2468f18 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:30:59 +0100 Subject: xen: add raw console write functions for debug Add a couple of functions which can write directly to the Xen console for debugging. This output ends up on the host's dom0 console (assuming it allows the domain to write there). Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/char/hvc_xen.c | 26 ++++++++++++++++++++++++++ include/xen/hvc-console.h | 3 +++ 2 files changed, 29 insertions(+) diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index dd68f8541c2d..e97d9d168325 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -157,3 +157,29 @@ struct console xenboot_console = { .write = xenboot_write_console, .flags = CON_PRINTBUFFER | CON_BOOT, }; + +void xen_raw_console_write(const char *str) +{ + int len = strlen(str); + + while(len > 0) { + int rc = HYPERVISOR_console_io(CONSOLEIO_write, len, (char *)str); + if (rc <= 0) + break; + + str += rc; + len -= rc; + } +} + +void xen_raw_printk(const char *fmt, ...) +{ + static char buf[512]; + va_list ap; + + va_start(ap, fmt); + vsnprintf(buf, sizeof(buf), fmt, ap); + va_end(ap); + + xen_raw_console_write(buf); +} diff --git a/include/xen/hvc-console.h b/include/xen/hvc-console.h index 21c0ecfd786d..efc3237ab990 100644 --- a/include/xen/hvc-console.h +++ b/include/xen/hvc-console.h @@ -3,4 +3,7 @@ extern struct console xenboot_console; +void xen_raw_console_write(const char *str); +void xen_raw_printk(const char *fmt, ...); + #endif /* XEN_HVC_CONSOLE_H */ -- cgit v1.2.3 From 0922abdc3982ae54cbe1b24ac5aa91a260eca1bb Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:00 +0100 Subject: xen: make early console also write to debug console When using "earlyprintk=xen", also write the console output to the raw debug console. This will appear on dom0's console if the hypervisor has been compiled to allow it. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/char/hvc_xen.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index e97d9d168325..2413af342a81 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -134,12 +134,27 @@ module_init(xen_init); module_exit(xen_fini); console_initcall(xen_cons_init); +static void raw_console_write(const char *str, int len) +{ + while(len > 0) { + int rc = HYPERVISOR_console_io(CONSOLEIO_write, len, (char *)str); + if (rc <= 0) + break; + + str += rc; + len -= rc; + } +} + +#ifdef CONFIG_EARLY_PRINTK static void xenboot_write_console(struct console *console, const char *string, unsigned len) { unsigned int linelen, off = 0; const char *pos; + raw_console_write(string, len); + while (off < len && NULL != (pos = strchr(string+off, '\n'))) { linelen = pos-string+off; if (off + linelen > len) @@ -155,21 +170,13 @@ static void xenboot_write_console(struct console *console, const char *string, struct console xenboot_console = { .name = "xenboot", .write = xenboot_write_console, - .flags = CON_PRINTBUFFER | CON_BOOT, + .flags = CON_PRINTBUFFER | CON_BOOT | CON_ANYTIME, }; +#endif /* CONFIG_EARLY_PRINTK */ void xen_raw_console_write(const char *str) { - int len = strlen(str); - - while(len > 0) { - int rc = HYPERVISOR_console_io(CONSOLEIO_write, len, (char *)str); - if (rc <= 0) - break; - - str += rc; - len -= rc; - } + raw_console_write(str, strlen(str)); } void xen_raw_printk(const char *fmt, ...) -- cgit v1.2.3 From 7b1333aa4cb546ddeb9c05098a53d9a777623a05 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:01 +0100 Subject: xen: use hypercall rather than clts Xen will trap and emulate clts, but its better to use a hypercall. Also, xenner doesn't handle clts. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 28 ++++++++++++++++++++++++++-- include/asm-x86/xen/hypercall.h | 7 +++++++ 2 files changed, 33 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index a05b7721bc81..446f4cd649e6 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -607,6 +607,30 @@ static void xen_flush_tlb_others(const cpumask_t *cpus, struct mm_struct *mm, xen_mc_issue(PARAVIRT_LAZY_MMU); } +static void xen_clts(void) +{ + struct multicall_space mcs; + + mcs = xen_mc_entry(0); + + MULTI_fpu_taskswitch(mcs.mc, 0); + + xen_mc_issue(PARAVIRT_LAZY_CPU); +} + +static void xen_write_cr0(unsigned long cr0) +{ + struct multicall_space mcs; + + /* Only pay attention to cr0.TS; everything else is + ignored. */ + mcs = xen_mc_entry(0); + + MULTI_fpu_taskswitch(mcs.mc, (cr0 & X86_CR0_TS) != 0); + + xen_mc_issue(PARAVIRT_LAZY_CPU); +} + static void xen_write_cr2(unsigned long cr2) { x86_read_percpu(xen_vcpu)->arch.cr2 = cr2; @@ -978,10 +1002,10 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = { .set_debugreg = xen_set_debugreg, .get_debugreg = xen_get_debugreg, - .clts = native_clts, + .clts = xen_clts, .read_cr0 = native_read_cr0, - .write_cr0 = native_write_cr0, + .write_cr0 = xen_write_cr0, .read_cr4 = native_read_cr4, .read_cr4_safe = native_read_cr4_safe, diff --git a/include/asm-x86/xen/hypercall.h b/include/asm-x86/xen/hypercall.h index c2ccd997ed35..897ff79cca3b 100644 --- a/include/asm-x86/xen/hypercall.h +++ b/include/asm-x86/xen/hypercall.h @@ -314,6 +314,13 @@ HYPERVISOR_nmi_op(unsigned long op, unsigned long arg) return _hypercall2(int, nmi_op, op, arg); } +static inline void +MULTI_fpu_taskswitch(struct multicall_entry *mcl, int set) +{ + mcl->op = __HYPERVISOR_fpu_taskswitch; + mcl->args[0] = set; +} + static inline void MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va, pte_t new_val, unsigned long flags) -- cgit v1.2.3 From 349c709f42453707f74bece0d9d35ee5b3842893 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:02 +0100 Subject: xen: use new sched_op Use the new sched_op hypercall, mainly because xenner doesn't support the old one. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 6 ++++-- include/asm-x86/xen/hypercall.h | 4 ++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 446f4cd649e6..35ddaf50180a 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -254,7 +254,7 @@ static void xen_irq_enable(void) static void xen_safe_halt(void) { /* Blocking includes an implicit local_irq_enable(). */ - if (HYPERVISOR_sched_op(SCHEDOP_block, 0) != 0) + if (HYPERVISOR_sched_op(SCHEDOP_block, NULL) != 0) BUG(); } @@ -1138,11 +1138,13 @@ static const struct smp_ops xen_smp_ops __initdata = { static void xen_reboot(int reason) { + struct sched_shutdown r = { .reason = reason }; + #ifdef CONFIG_SMP smp_send_stop(); #endif - if (HYPERVISOR_sched_op(SCHEDOP_shutdown, reason)) + if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r)) BUG(); } diff --git a/include/asm-x86/xen/hypercall.h b/include/asm-x86/xen/hypercall.h index 897ff79cca3b..2a4f9b41d684 100644 --- a/include/asm-x86/xen/hypercall.h +++ b/include/asm-x86/xen/hypercall.h @@ -176,9 +176,9 @@ HYPERVISOR_fpu_taskswitch(int set) } static inline int -HYPERVISOR_sched_op(int cmd, unsigned long arg) +HYPERVISOR_sched_op(int cmd, void *arg) { - return _hypercall2(int, sched_op, cmd, arg); + return _hypercall2(int, sched_op_new, cmd, arg); } static inline long -- cgit v1.2.3 From 2956a3511c8c5dccb1d4739ead17c7c3c23a24b7 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:04 +0100 Subject: xen: allow some cr4 updates The guest can legitimately change things like cr4.OSFXSR and OSXMMEXCPT, so let it. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 35ddaf50180a..f6876485ee7d 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -648,8 +648,10 @@ static unsigned long xen_read_cr2_direct(void) static void xen_write_cr4(unsigned long cr4) { - /* Just ignore cr4 changes; Xen doesn't allow us to do - anything anyway. */ + cr4 &= ~X86_CR4_PGE; + cr4 &= ~X86_CR4_PSE; + + native_write_cr4(cr4); } static unsigned long xen_read_cr3(void) -- cgit v1.2.3 From 239d1fc04ed0b58d638096b12a7f6d50269d30c9 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:05 +0100 Subject: xen: don't worry about preempt during xen_irq_enable() When enabling interrupts, we don't need to worry about preemption, because we either enter with interrupts disabled - so no preemption - or the caller is confused and is re-enabling interrupts on some indeterminate processor. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index f6876485ee7d..4a372b71239d 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -235,13 +235,13 @@ static void xen_irq_enable(void) { struct vcpu_info *vcpu; - /* There's a one instruction preempt window here. We need to - make sure we're don't switch CPUs between getting the vcpu - pointer and updating the mask. */ - preempt_disable(); + /* We don't need to worry about being preempted here, since + either a) interrupts are disabled, so no preemption, or b) + the caller is confused and is trying to re-enable interrupts + on an indeterminate processor. */ + vcpu = x86_read_percpu(xen_vcpu); vcpu->evtchn_upcall_mask = 0; - preempt_enable_no_resched(); /* Doesn't matter if we get preempted here, because any pending event will get dealt with anyway. */ -- cgit v1.2.3 From a15af1c9ea2750a9ff01e51615c45950bad8221b Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:06 +0100 Subject: x86/paravirt: add pte_flags to just get pte flags Add pte_flags() to extract the flags from a pte. This is a special case of pte_val() which is only guaranteed to return the pte's flags correctly; the page number may be corrupted or missing. The intent is to allow paravirt implementations to return pte flags without having to do any translation of the page number (most notably, Xen). Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/kernel/paravirt.c | 1 + arch/x86/xen/enlighten.c | 1 + drivers/lguest/lg.h | 1 - include/asm-x86/page.h | 1 + include/asm-x86/paravirt.h | 15 +++++++++++++++ include/asm-x86/pgtable.h | 16 ++++++++-------- 6 files changed, 26 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 74f0c5ea2a03..c98d54688180 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -403,6 +403,7 @@ struct pv_mmu_ops pv_mmu_ops = { #endif /* PAGETABLE_LEVELS >= 3 */ .pte_val = native_pte_val, + .pte_flags = native_pte_val, .pgd_val = native_pgd_val, .make_pte = native_make_pte, diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 4a372b71239d..1b4b5fa498b3 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1101,6 +1101,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .set_pmd = xen_set_pmd, .pte_val = xen_pte_val, + .pte_flags = native_pte_val, .pgd_val = xen_pgd_val, .make_pte = xen_make_pte, diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h index 005bd045d2eb..5faefeaf6790 100644 --- a/drivers/lguest/lg.h +++ b/drivers/lguest/lg.h @@ -136,7 +136,6 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user); * first step in the migration to the kernel types. pte_pfn is already defined * in the kernel. */ #define pgd_flags(x) (pgd_val(x) & ~PAGE_MASK) -#define pte_flags(x) (pte_val(x) & ~PAGE_MASK) #define pgd_pfn(x) (pgd_val(x) >> PAGE_SHIFT) /* interrupts_and_traps.c: */ diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h index dc936dddf161..a1e2b9470f25 100644 --- a/include/asm-x86/page.h +++ b/include/asm-x86/page.h @@ -160,6 +160,7 @@ static inline pteval_t native_pte_val(pte_t pte) #endif #define pte_val(x) native_pte_val(x) +#define pte_flags(x) native_pte_val(x) #define __pte(x) native_make_pte(x) #endif /* CONFIG_PARAVIRT */ diff --git a/include/asm-x86/paravirt.h b/include/asm-x86/paravirt.h index 0f13b945e240..5ea37a48eecb 100644 --- a/include/asm-x86/paravirt.h +++ b/include/asm-x86/paravirt.h @@ -239,6 +239,7 @@ struct pv_mmu_ops { unsigned long addr, pte_t *ptep); pteval_t (*pte_val)(pte_t); + pteval_t (*pte_flags)(pte_t); pte_t (*make_pte)(pteval_t pte); pgdval_t (*pgd_val)(pgd_t); @@ -996,6 +997,20 @@ static inline pteval_t pte_val(pte_t pte) return ret; } +static inline pteval_t pte_flags(pte_t pte) +{ + pteval_t ret; + + if (sizeof(pteval_t) > sizeof(long)) + ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_flags, + pte.pte, (u64)pte.pte >> 32); + else + ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_flags, + pte.pte); + + return ret; +} + static inline pgd_t __pgd(pgdval_t val) { pgdval_t ret; diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h index 97c271b2910b..47a852cb8c92 100644 --- a/include/asm-x86/pgtable.h +++ b/include/asm-x86/pgtable.h @@ -164,37 +164,37 @@ extern struct list_head pgd_list; */ static inline int pte_dirty(pte_t pte) { - return pte_val(pte) & _PAGE_DIRTY; + return pte_flags(pte) & _PAGE_DIRTY; } static inline int pte_young(pte_t pte) { - return pte_val(pte) & _PAGE_ACCESSED; + return pte_flags(pte) & _PAGE_ACCESSED; } static inline int pte_write(pte_t pte) { - return pte_val(pte) & _PAGE_RW; + return pte_flags(pte) & _PAGE_RW; } static inline int pte_file(pte_t pte) { - return pte_val(pte) & _PAGE_FILE; + return pte_flags(pte) & _PAGE_FILE; } static inline int pte_huge(pte_t pte) { - return pte_val(pte) & _PAGE_PSE; + return pte_flags(pte) & _PAGE_PSE; } static inline int pte_global(pte_t pte) { - return pte_val(pte) & _PAGE_GLOBAL; + return pte_flags(pte) & _PAGE_GLOBAL; } static inline int pte_exec(pte_t pte) { - return !(pte_val(pte) & _PAGE_NX); + return !(pte_flags(pte) & _PAGE_NX); } static inline int pte_special(pte_t pte) @@ -305,7 +305,7 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot) return __pgprot(preservebits | addbits); } -#define pte_pgprot(x) __pgprot(pte_val(x) & ~PTE_MASK) +#define pte_pgprot(x) __pgprot(pte_flags(x) & ~PTE_MASK) #define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask) -- cgit v1.2.3 From 9e124fe16ff24746d6de5a2ad685266d7bce0e08 Mon Sep 17 00:00:00 2001 From: Markus Armbruster Date: Mon, 26 May 2008 23:31:07 +0100 Subject: xen: Enable console tty by default in domU if it's not a dummy Without console= arguments on the kernel command line, the first console to register becomes enabled and the preferred console (the one behind /dev/console). This is normally tty (assuming CONFIG_VT_CONSOLE is enabled, which it commonly is). This is okay as long tty is a useful console. But unless we have the PV framebuffer, and it is enabled for this domain, tty0 in domU is merely a dummy. In that case, we want the preferred console to be the Xen console hvc0, and we want it without having to fiddle with the kernel command line. Commit b8c2d3dfbc117dff26058fbac316b8acfc2cb5f7 did that for us. Since we now have the PV framebuffer, we want to enable and prefer tty again, but only when PVFB is enabled. But even then we still want to enable the Xen console as well. Problem: when tty registers, we can't yet know whether the PVFB is enabled. By the time we can know (xenstore is up), the console setup game is over. Solution: enable console tty by default, but keep hvc as the preferred console. Change the preferred console to tty when PVFB probes successfully, unless we've been given console kernel parameters. Signed-off-by: Markus Armbruster Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 4 +++- drivers/video/xen-fbfront.c | 25 +++++++++++++++++++++++++ include/linux/console.h | 2 ++ kernel/printk.c | 3 +++ 4 files changed, 33 insertions(+), 1 deletion(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 1b4b5fa498b3..6cfb708408e9 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1256,8 +1256,10 @@ asmlinkage void __init xen_start_kernel(void) ? __pa(xen_start_info->mod_start) : 0; boot_params.hdr.ramdisk_size = xen_start_info->mod_len; - if (!is_initial_xendomain()) + if (!is_initial_xendomain()) { + add_preferred_console("tty", 0, NULL); add_preferred_console("hvc", 0, NULL); + } /* Start the world */ start_kernel(); diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index 619a6f8d65a2..4e10876e62fc 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -18,6 +18,7 @@ * frame buffer. */ +#include #include #include #include @@ -48,6 +49,7 @@ struct xenfb_info { static u32 xenfb_mem_len = XENFB_WIDTH * XENFB_HEIGHT * XENFB_DEPTH / 8; +static void xenfb_make_preferred_console(void); static int xenfb_remove(struct xenbus_device *); static void xenfb_init_shared_page(struct xenfb_info *); static int xenfb_connect_backend(struct xenbus_device *, struct xenfb_info *); @@ -348,6 +350,7 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, if (ret < 0) goto error; + xenfb_make_preferred_console(); return 0; error_nomem: @@ -358,6 +361,28 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, return ret; } +static __devinit void +xenfb_make_preferred_console(void) +{ + struct console *c; + + if (console_set_on_cmdline) + return; + + acquire_console_sem(); + for (c = console_drivers; c; c = c->next) { + if (!strcmp(c->name, "tty") && c->index == 0) + break; + } + release_console_sem(); + if (c) { + unregister_console(c); + c->flags |= CON_CONSDEV; + c->flags &= ~CON_PRINTBUFFER; /* don't print again */ + register_console(c); + } +} + static int xenfb_resume(struct xenbus_device *dev) { struct xenfb_info *info = dev->dev.driver_data; diff --git a/include/linux/console.h b/include/linux/console.h index a4f27fbdf549..248e6e3b9b73 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -108,6 +108,8 @@ struct console { struct console *next; }; +extern int console_set_on_cmdline; + extern int add_preferred_console(char *name, int idx, char *options); extern int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options); extern void register_console(struct console *); diff --git a/kernel/printk.c b/kernel/printk.c index 8fb01c32aa3b..028ed75d4864 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -121,6 +121,8 @@ struct console_cmdline static struct console_cmdline console_cmdline[MAX_CMDLINECONSOLES]; static int selected_console = -1; static int preferred_console = -1; +int console_set_on_cmdline; +EXPORT_SYMBOL(console_set_on_cmdline); /* Flag: console code may call schedule() */ static int console_may_schedule; @@ -890,6 +892,7 @@ static int __init console_setup(char *str) *s = 0; __add_preferred_console(buf, idx, options, brl_options); + console_set_on_cmdline = 1; return 1; } __setup("console=", console_setup); -- cgit v1.2.3 From 6ba0e7b36c7cc1745b3cbeda244d14edae3ad058 Mon Sep 17 00:00:00 2001 From: Markus Armbruster Date: Mon, 26 May 2008 23:31:08 +0100 Subject: xen pvfb: Pointer z-axis (mouse wheel) support Add z-axis motion to pointer events. Backward compatible, because there's space for the z-axis in union xenkbd_in_event, and old backends zero it. Derived from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/57dfe0098000 http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/1edfea26a2a9 http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/c3ff0b26f664 Signed-off-by: Pat Campbell Signed-off-by: Markus Armbruster Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/input/xen-kbdfront.c | 8 +++++++- include/xen/interface/io/kbdif.h | 2 ++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c index 0f47f4697cdf..9da4452786fa 100644 --- a/drivers/input/xen-kbdfront.c +++ b/drivers/input/xen-kbdfront.c @@ -66,6 +66,9 @@ static irqreturn_t input_handler(int rq, void *dev_id) case XENKBD_TYPE_MOTION: input_report_rel(dev, REL_X, event->motion.rel_x); input_report_rel(dev, REL_Y, event->motion.rel_y); + if (event->motion.rel_z) + input_report_rel(dev, REL_WHEEL, + -event->motion.rel_z); break; case XENKBD_TYPE_KEY: dev = NULL; @@ -84,6 +87,9 @@ static irqreturn_t input_handler(int rq, void *dev_id) case XENKBD_TYPE_POS: input_report_abs(dev, ABS_X, event->pos.abs_x); input_report_abs(dev, ABS_Y, event->pos.abs_y); + if (event->pos.rel_z) + input_report_rel(dev, REL_WHEEL, + -event->pos.rel_z); break; } if (dev) @@ -152,7 +158,7 @@ static int __devinit xenkbd_probe(struct xenbus_device *dev, ptr->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS); for (i = BTN_LEFT; i <= BTN_TASK; i++) set_bit(i, ptr->keybit); - ptr->relbit[0] = BIT(REL_X) | BIT(REL_Y); + ptr->relbit[0] = BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL); input_set_abs_params(ptr, ABS_X, 0, XENFB_WIDTH, 0, 0); input_set_abs_params(ptr, ABS_Y, 0, XENFB_HEIGHT, 0, 0); diff --git a/include/xen/interface/io/kbdif.h b/include/xen/interface/io/kbdif.h index fb97f4284ffd..8066c7849fbe 100644 --- a/include/xen/interface/io/kbdif.h +++ b/include/xen/interface/io/kbdif.h @@ -49,6 +49,7 @@ struct xenkbd_motion { uint8_t type; /* XENKBD_TYPE_MOTION */ int32_t rel_x; /* relative X motion */ int32_t rel_y; /* relative Y motion */ + int32_t rel_z; /* relative Z motion (wheel) */ }; struct xenkbd_key { @@ -61,6 +62,7 @@ struct xenkbd_position { uint8_t type; /* XENKBD_TYPE_POS */ int32_t abs_x; /* absolute X position (in FB pixels) */ int32_t abs_y; /* absolute Y position (in FB pixels) */ + int32_t rel_z; /* relative Z motion (wheel) */ }; #define XENKBD_IN_EVENT_SIZE 40 -- cgit v1.2.3 From 1e892c959da42278e60b21f5ecfd6fba0efff313 Mon Sep 17 00:00:00 2001 From: Markus Armbruster Date: Mon, 26 May 2008 23:31:09 +0100 Subject: xen pvfb: Module aliases to support module autoloading These are mostly for completeness and consistency with the other frontends, as PVFB is typically compiled in rather than a module. Derived from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/5e294e29a43e While there, add module descriptions. Signed-off-by: Markus Armbruster Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/input/xen-kbdfront.c | 2 ++ drivers/video/xen-fbfront.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c index 9da4452786fa..eaf69cf5b444 100644 --- a/drivers/input/xen-kbdfront.c +++ b/drivers/input/xen-kbdfront.c @@ -343,4 +343,6 @@ static void __exit xenkbd_cleanup(void) module_init(xenkbd_init); module_exit(xenkbd_cleanup); +MODULE_DESCRIPTION("Xen virtual keyboard/pointer device frontend"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("xen:vkbd"); diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index 4e10876e62fc..5553e517563e 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -572,4 +572,6 @@ static void __exit xenfb_cleanup(void) module_init(xenfb_init); module_exit(xenfb_cleanup); +MODULE_DESCRIPTION("Xen virtual framebuffer device frontend"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("xen:vfb"); -- cgit v1.2.3 From f4ad1ebd7a0fae2782ef9f76c0b94b536742c3e8 Mon Sep 17 00:00:00 2001 From: Markus Armbruster Date: Mon, 26 May 2008 23:31:10 +0100 Subject: xen pvfb: Zero unused bytes in events sent to backend This isn't a security flaw (the backend can see all our memory anyway). But it's the right thing to do all the same. Signed-off-by: Markus Armbruster Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/video/xen-fbfront.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index 5553e517563e..291eef695594 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -61,6 +61,7 @@ static void xenfb_do_update(struct xenfb_info *info, union xenfb_out_event event; u32 prod; + memset(&event, 0, sizeof(event)); event.type = XENFB_TYPE_UPDATE; event.update.x = x; event.update.y = y; -- cgit v1.2.3 From e4dcff1f6e7582f76c2c9990b1d9111bbc8e26ef Mon Sep 17 00:00:00 2001 From: Markus Armbruster Date: Mon, 26 May 2008 23:31:11 +0100 Subject: xen pvfb: Dynamic mode support (screen resizing) The pvfb backend indicates dynamic mode support by creating node feature_resize with a non-zero value in its xenstore directory. xen-fbfront sends a resize notification event on mode change. Fully backwards compatible both ways. Framebuffer size and initial resolution can be controlled through kernel parameter xen_fbfront.video. The backend enforces a separate size limit, which it advertises in node videoram in its xenstore directory. xen-kbdfront gets the maximum screen resolution from nodes width and height in the backend's xenstore directory instead of hardcoding it. Additional goodie: support for larger framebuffers (512M on a 64-bit system with 4K pages). Changing the number of bits per pixels dynamically is not supported, yet. Ported from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/92f7b3144f41 http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/bfc040135633 Signed-off-by: Pat Campbell Signed-off-by: Markus Armbruster Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/input/xen-kbdfront.c | 10 +++ drivers/video/xen-fbfront.c | 183 +++++++++++++++++++++++++++++++++------- include/xen/interface/io/fbif.h | 29 +++++-- 3 files changed, 188 insertions(+), 34 deletions(-) diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c index eaf69cf5b444..9ce3b3baf3a2 100644 --- a/drivers/input/xen-kbdfront.c +++ b/drivers/input/xen-kbdfront.c @@ -300,6 +300,16 @@ InitWait: */ if (dev->state != XenbusStateConnected) goto InitWait; /* no InitWait seen yet, fudge it */ + + /* Set input abs params to match backend screen res */ + if (xenbus_scanf(XBT_NIL, info->xbdev->otherend, + "width", "%d", &val) > 0) + input_set_abs_params(info->ptr, ABS_X, 0, val, 0, 0); + + if (xenbus_scanf(XBT_NIL, info->xbdev->otherend, + "height", "%d", &val) > 0) + input_set_abs_params(info->ptr, ABS_Y, 0, val, 0, 0); + break; case XenbusStateClosing: diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index 291eef695594..47ed39b52f9c 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -43,23 +43,47 @@ struct xenfb_info { struct xenfb_page *page; unsigned long *mfns; int update_wanted; /* XENFB_TYPE_UPDATE wanted */ + int feature_resize; /* XENFB_TYPE_RESIZE ok */ + struct xenfb_resize resize; /* protected by resize_lock */ + int resize_dpy; /* ditto */ + spinlock_t resize_lock; struct xenbus_device *xbdev; }; -static u32 xenfb_mem_len = XENFB_WIDTH * XENFB_HEIGHT * XENFB_DEPTH / 8; +#define XENFB_DEFAULT_FB_LEN (XENFB_WIDTH * XENFB_HEIGHT * XENFB_DEPTH / 8) + +enum { KPARAM_MEM, KPARAM_WIDTH, KPARAM_HEIGHT, KPARAM_CNT }; +static int video[KPARAM_CNT] = { 2, XENFB_WIDTH, XENFB_HEIGHT }; +module_param_array(video, int, NULL, 0); +MODULE_PARM_DESC(video, + "Video memory size in MB, width, height in pixels (default 2,800,600)"); static void xenfb_make_preferred_console(void); static int xenfb_remove(struct xenbus_device *); -static void xenfb_init_shared_page(struct xenfb_info *); +static void xenfb_init_shared_page(struct xenfb_info *, struct fb_info *); static int xenfb_connect_backend(struct xenbus_device *, struct xenfb_info *); static void xenfb_disconnect_backend(struct xenfb_info *); +static void xenfb_send_event(struct xenfb_info *info, + union xenfb_out_event *event) +{ + u32 prod; + + prod = info->page->out_prod; + /* caller ensures !xenfb_queue_full() */ + mb(); /* ensure ring space available */ + XENFB_OUT_RING_REF(info->page, prod) = *event; + wmb(); /* ensure ring contents visible */ + info->page->out_prod = prod + 1; + + notify_remote_via_irq(info->irq); +} + static void xenfb_do_update(struct xenfb_info *info, int x, int y, int w, int h) { union xenfb_out_event event; - u32 prod; memset(&event, 0, sizeof(event)); event.type = XENFB_TYPE_UPDATE; @@ -68,14 +92,19 @@ static void xenfb_do_update(struct xenfb_info *info, event.update.width = w; event.update.height = h; - prod = info->page->out_prod; /* caller ensures !xenfb_queue_full() */ - mb(); /* ensure ring space available */ - XENFB_OUT_RING_REF(info->page, prod) = event; - wmb(); /* ensure ring contents visible */ - info->page->out_prod = prod + 1; + xenfb_send_event(info, &event); +} - notify_remote_via_irq(info->irq); +static void xenfb_do_resize(struct xenfb_info *info) +{ + union xenfb_out_event event; + + memset(&event, 0, sizeof(event)); + event.resize = info->resize; + + /* caller ensures !xenfb_queue_full() */ + xenfb_send_event(info, &event); } static int xenfb_queue_full(struct xenfb_info *info) @@ -87,12 +116,28 @@ static int xenfb_queue_full(struct xenfb_info *info) return prod - cons == XENFB_OUT_RING_LEN; } +static void xenfb_handle_resize_dpy(struct xenfb_info *info) +{ + unsigned long flags; + + spin_lock_irqsave(&info->resize_lock, flags); + if (info->resize_dpy) { + if (!xenfb_queue_full(info)) { + info->resize_dpy = 0; + xenfb_do_resize(info); + } + } + spin_unlock_irqrestore(&info->resize_lock, flags); +} + static void xenfb_refresh(struct xenfb_info *info, int x1, int y1, int w, int h) { unsigned long flags; - int y2 = y1 + h - 1; int x2 = x1 + w - 1; + int y2 = y1 + h - 1; + + xenfb_handle_resize_dpy(info); if (!info->update_wanted) return; @@ -225,6 +270,57 @@ static ssize_t xenfb_write(struct fb_info *p, const char __user *buf, return res; } +static int +xenfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +{ + struct xenfb_info *xenfb_info; + int required_mem_len; + + xenfb_info = info->par; + + if (!xenfb_info->feature_resize) { + if (var->xres == video[KPARAM_WIDTH] && + var->yres == video[KPARAM_HEIGHT] && + var->bits_per_pixel == xenfb_info->page->depth) { + return 0; + } + return -EINVAL; + } + + /* Can't resize past initial width and height */ + if (var->xres > video[KPARAM_WIDTH] || var->yres > video[KPARAM_HEIGHT]) + return -EINVAL; + + required_mem_len = var->xres * var->yres * xenfb_info->page->depth / 8; + if (var->bits_per_pixel == xenfb_info->page->depth && + var->xres <= info->fix.line_length / (XENFB_DEPTH / 8) && + required_mem_len <= info->fix.smem_len) { + var->xres_virtual = var->xres; + var->yres_virtual = var->yres; + return 0; + } + return -EINVAL; +} + +static int xenfb_set_par(struct fb_info *info) +{ + struct xenfb_info *xenfb_info; + unsigned long flags; + + xenfb_info = info->par; + + spin_lock_irqsave(&xenfb_info->resize_lock, flags); + xenfb_info->resize.type = XENFB_TYPE_RESIZE; + xenfb_info->resize.width = info->var.xres; + xenfb_info->resize.height = info->var.yres; + xenfb_info->resize.stride = info->fix.line_length; + xenfb_info->resize.depth = info->var.bits_per_pixel; + xenfb_info->resize.offset = 0; + xenfb_info->resize_dpy = 1; + spin_unlock_irqrestore(&xenfb_info->resize_lock, flags); + return 0; +} + static struct fb_ops xenfb_fb_ops = { .owner = THIS_MODULE, .fb_read = fb_sys_read, @@ -233,6 +329,8 @@ static struct fb_ops xenfb_fb_ops = { .fb_fillrect = xenfb_fillrect, .fb_copyarea = xenfb_copyarea, .fb_imageblit = xenfb_imageblit, + .fb_check_var = xenfb_check_var, + .fb_set_par = xenfb_set_par, }; static irqreturn_t xenfb_event_handler(int rq, void *dev_id) @@ -261,6 +359,8 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, { struct xenfb_info *info; struct fb_info *fb_info; + int fb_size; + int val; int ret; info = kzalloc(sizeof(*info), GFP_KERNEL); @@ -268,18 +368,35 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, xenbus_dev_fatal(dev, -ENOMEM, "allocating info structure"); return -ENOMEM; } + + /* Limit kernel param videoram amount to what is in xenstore */ + if (xenbus_scanf(XBT_NIL, dev->otherend, "videoram", "%d", &val) == 1) { + if (val < video[KPARAM_MEM]) + video[KPARAM_MEM] = val; + } + + /* If requested res does not fit in available memory, use default */ + fb_size = video[KPARAM_MEM] * 1024 * 1024; + if (video[KPARAM_WIDTH] * video[KPARAM_HEIGHT] * XENFB_DEPTH / 8 + > fb_size) { + video[KPARAM_WIDTH] = XENFB_WIDTH; + video[KPARAM_HEIGHT] = XENFB_HEIGHT; + fb_size = XENFB_DEFAULT_FB_LEN; + } + dev->dev.driver_data = info; info->xbdev = dev; info->irq = -1; info->x1 = info->y1 = INT_MAX; spin_lock_init(&info->dirty_lock); + spin_lock_init(&info->resize_lock); - info->fb = vmalloc(xenfb_mem_len); + info->fb = vmalloc(fb_size); if (info->fb == NULL) goto error_nomem; - memset(info->fb, 0, xenfb_mem_len); + memset(info->fb, 0, fb_size); - info->nr_pages = (xenfb_mem_len + PAGE_SIZE - 1) >> PAGE_SHIFT; + info->nr_pages = (fb_size + PAGE_SIZE - 1) >> PAGE_SHIFT; info->mfns = vmalloc(sizeof(unsigned long) * info->nr_pages); if (!info->mfns) @@ -290,8 +407,6 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, if (!info->page) goto error_nomem; - xenfb_init_shared_page(info); - /* abusing framebuffer_alloc() to allocate pseudo_palette */ fb_info = framebuffer_alloc(sizeof(u32) * 256, NULL); if (fb_info == NULL) @@ -304,9 +419,9 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, fb_info->screen_base = info->fb; fb_info->fbops = &xenfb_fb_ops; - fb_info->var.xres_virtual = fb_info->var.xres = info->page->width; - fb_info->var.yres_virtual = fb_info->var.yres = info->page->height; - fb_info->var.bits_per_pixel = info->page->depth; + fb_info->var.xres_virtual = fb_info->var.xres = video[KPARAM_WIDTH]; + fb_info->var.yres_virtual = fb_info->var.yres = video[KPARAM_HEIGHT]; + fb_info->var.bits_per_pixel = XENFB_DEPTH; fb_info->var.red = (struct fb_bitfield){16, 8, 0}; fb_info->var.green = (struct fb_bitfield){8, 8, 0}; @@ -318,9 +433,9 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, fb_info->var.vmode = FB_VMODE_NONINTERLACED; fb_info->fix.visual = FB_VISUAL_TRUECOLOR; - fb_info->fix.line_length = info->page->line_length; + fb_info->fix.line_length = fb_info->var.xres * XENFB_DEPTH / 8; fb_info->fix.smem_start = 0; - fb_info->fix.smem_len = xenfb_mem_len; + fb_info->fix.smem_len = fb_size; strcpy(fb_info->fix.id, "xen"); fb_info->fix.type = FB_TYPE_PACKED_PIXELS; fb_info->fix.accel = FB_ACCEL_NONE; @@ -337,6 +452,8 @@ static int __devinit xenfb_probe(struct xenbus_device *dev, fb_info->fbdefio = &xenfb_defio; fb_deferred_io_init(fb_info); + xenfb_init_shared_page(info, fb_info); + ret = register_framebuffer(fb_info); if (ret) { fb_deferred_io_cleanup(fb_info); @@ -389,7 +506,7 @@ static int xenfb_resume(struct xenbus_device *dev) struct xenfb_info *info = dev->dev.driver_data; xenfb_disconnect_backend(info); - xenfb_init_shared_page(info); + xenfb_init_shared_page(info, info->fb_info); return xenfb_connect_backend(dev, info); } @@ -417,20 +534,23 @@ static unsigned long vmalloc_to_mfn(void *address) return pfn_to_mfn(vmalloc_to_pfn(address)); } -static void xenfb_init_shared_page(struct xenfb_info *info) +static void xenfb_init_shared_page(struct xenfb_info *info, + struct fb_info *fb_info) { int i; + int epd = PAGE_SIZE / sizeof(info->mfns[0]); for (i = 0; i < info->nr_pages; i++) info->mfns[i] = vmalloc_to_mfn(info->fb + i * PAGE_SIZE); - info->page->pd[0] = vmalloc_to_mfn(info->mfns); - info->page->pd[1] = 0; - info->page->width = XENFB_WIDTH; - info->page->height = XENFB_HEIGHT; - info->page->depth = XENFB_DEPTH; - info->page->line_length = (info->page->depth / 8) * info->page->width; - info->page->mem_length = xenfb_mem_len; + for (i = 0; i * epd < info->nr_pages; i++) + info->page->pd[i] = vmalloc_to_mfn(&info->mfns[i * epd]); + + info->page->width = fb_info->var.xres; + info->page->height = fb_info->var.yres; + info->page->depth = fb_info->var.bits_per_pixel; + info->page->line_length = fb_info->fix.line_length; + info->page->mem_length = fb_info->fix.smem_len; info->page->in_cons = info->page->in_prod = 0; info->page->out_cons = info->page->out_prod = 0; } @@ -530,6 +650,11 @@ InitWait: val = 0; if (val) info->update_wanted = 1; + + if (xenbus_scanf(XBT_NIL, dev->otherend, + "feature-resize", "%d", &val) < 0) + val = 0; + info->feature_resize = val; break; case XenbusStateClosing: diff --git a/include/xen/interface/io/fbif.h b/include/xen/interface/io/fbif.h index 5a934dd7796d..974a51ed9165 100644 --- a/include/xen/interface/io/fbif.h +++ b/include/xen/interface/io/fbif.h @@ -49,11 +49,27 @@ struct xenfb_update { int32_t height; /* rect height */ }; +/* + * Framebuffer resize notification event + * Capable backend sets feature-resize in xenstore. + */ +#define XENFB_TYPE_RESIZE 3 + +struct xenfb_resize { + uint8_t type; /* XENFB_TYPE_RESIZE */ + int32_t width; /* width in pixels */ + int32_t height; /* height in pixels */ + int32_t stride; /* stride in bytes */ + int32_t depth; /* depth in bits */ + int32_t offset; /* start offset within framebuffer */ +}; + #define XENFB_OUT_EVENT_SIZE 40 union xenfb_out_event { uint8_t type; struct xenfb_update update; + struct xenfb_resize resize; char pad[XENFB_OUT_EVENT_SIZE]; }; @@ -105,15 +121,18 @@ struct xenfb_page { * Each directory page holds PAGE_SIZE / sizeof(*pd) * framebuffer pages, and can thus map up to PAGE_SIZE * * PAGE_SIZE / sizeof(*pd) bytes. With PAGE_SIZE == 4096 and - * sizeof(unsigned long) == 4, that's 4 Megs. Two directory - * pages should be enough for a while. + * sizeof(unsigned long) == 4/8, that's 4 Megs 32 bit and 2 + * Megs 64 bit. 256 directories give enough room for a 512 + * Meg framebuffer with a max resolution of 12,800x10,240. + * Should be enough for a while with room leftover for + * expansion. */ - unsigned long pd[2]; + unsigned long pd[256]; }; /* - * Wart: xenkbd needs to know resolution. Put it here until a better - * solution is found, but don't leak it to the backend. + * Wart: xenkbd needs to know default resolution. Put it here until a + * better solution is found, but don't leak it to the backend. */ #ifdef __KERNEL__ #define XENFB_WIDTH 800 -- cgit v1.2.3 From 83abc70a4c6e306f4c1672e25884322f797e4fcb Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:12 +0100 Subject: xen: make earlyprintk=xen work again For some perverse reason, if you call add_preferred_console() it prevents setup_early_printk() from successfully enabling the boot console - unless you make it a preferred console too... Also, make xenboot console output distinct from normal console output, since it gets repeated when the console handover happens, and the duplicated output is confusing without disambiguation. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner Cc: Markus Armbruster Cc: Gerd Hoffmann --- arch/x86/xen/enlighten.c | 1 + drivers/char/hvc_xen.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 6cfb708408e9..5c0635a8bffd 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1257,6 +1257,7 @@ asmlinkage void __init xen_start_kernel(void) boot_params.hdr.ramdisk_size = xen_start_info->mod_len; if (!is_initial_xendomain()) { + add_preferred_console("xenboot", 0, NULL); add_preferred_console("tty", 0, NULL); add_preferred_console("hvc", 0, NULL); } diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index 2413af342a81..d5fe0a8952fa 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -155,6 +155,7 @@ static void xenboot_write_console(struct console *console, const char *string, raw_console_write(string, len); + write_console(0, "(early) ", 8); while (off < len && NULL != (pos = strchr(string+off, '\n'))) { linelen = pos-string+off; if (off + linelen > len) -- cgit v1.2.3 From ec9b2065d4d3b797604c09a569083dd9ff951b1b Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Mon, 26 May 2008 23:31:13 +0100 Subject: xen: Move manage.c to drivers/xen for ia64/xen support move arch/x86/xen/manage.c under drivers/xen/to share codes with x86 and ia64. ia64/xen also uses manage.c Signed-off-by: Isaku Yamahata Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/Makefile | 2 +- arch/x86/xen/manage.c | 143 -------------------------------------------------- drivers/xen/Makefile | 2 +- drivers/xen/manage.c | 143 ++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 145 insertions(+), 145 deletions(-) delete mode 100644 arch/x86/xen/manage.c create mode 100644 drivers/xen/manage.c diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 3d8df981d5fd..40b119b6b103 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -1,4 +1,4 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o \ - time.o manage.o xen-asm.o grant-table.o + time.o xen-asm.o grant-table.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/x86/xen/manage.c b/arch/x86/xen/manage.c deleted file mode 100644 index aa7af9e6abc0..000000000000 --- a/arch/x86/xen/manage.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * Handle extern requests for shutdown, reboot and sysrq - */ -#include -#include -#include -#include - -#include - -#define SHUTDOWN_INVALID -1 -#define SHUTDOWN_POWEROFF 0 -#define SHUTDOWN_SUSPEND 2 -/* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only - * report a crash, not be instructed to crash! - * HALT is the same as POWEROFF, as far as we're concerned. The tools use - * the distinction when we return the reason code to them. - */ -#define SHUTDOWN_HALT 4 - -/* Ignore multiple shutdown requests. */ -static int shutting_down = SHUTDOWN_INVALID; - -static void shutdown_handler(struct xenbus_watch *watch, - const char **vec, unsigned int len) -{ - char *str; - struct xenbus_transaction xbt; - int err; - - if (shutting_down != SHUTDOWN_INVALID) - return; - - again: - err = xenbus_transaction_start(&xbt); - if (err) - return; - - str = (char *)xenbus_read(xbt, "control", "shutdown", NULL); - /* Ignore read errors and empty reads. */ - if (XENBUS_IS_ERR_READ(str)) { - xenbus_transaction_end(xbt, 1); - return; - } - - xenbus_write(xbt, "control", "shutdown", ""); - - err = xenbus_transaction_end(xbt, 0); - if (err == -EAGAIN) { - kfree(str); - goto again; - } - - if (strcmp(str, "poweroff") == 0 || - strcmp(str, "halt") == 0) - orderly_poweroff(false); - else if (strcmp(str, "reboot") == 0) - ctrl_alt_del(); - else { - printk(KERN_INFO "Ignoring shutdown request: %s\n", str); - shutting_down = SHUTDOWN_INVALID; - } - - kfree(str); -} - -static void sysrq_handler(struct xenbus_watch *watch, const char **vec, - unsigned int len) -{ - char sysrq_key = '\0'; - struct xenbus_transaction xbt; - int err; - - again: - err = xenbus_transaction_start(&xbt); - if (err) - return; - if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) { - printk(KERN_ERR "Unable to read sysrq code in " - "control/sysrq\n"); - xenbus_transaction_end(xbt, 1); - return; - } - - if (sysrq_key != '\0') - xenbus_printf(xbt, "control", "sysrq", "%c", '\0'); - - err = xenbus_transaction_end(xbt, 0); - if (err == -EAGAIN) - goto again; - - if (sysrq_key != '\0') - handle_sysrq(sysrq_key, NULL); -} - -static struct xenbus_watch shutdown_watch = { - .node = "control/shutdown", - .callback = shutdown_handler -}; - -static struct xenbus_watch sysrq_watch = { - .node = "control/sysrq", - .callback = sysrq_handler -}; - -static int setup_shutdown_watcher(void) -{ - int err; - - err = register_xenbus_watch(&shutdown_watch); - if (err) { - printk(KERN_ERR "Failed to set shutdown watcher\n"); - return err; - } - - err = register_xenbus_watch(&sysrq_watch); - if (err) { - printk(KERN_ERR "Failed to set sysrq watcher\n"); - return err; - } - - return 0; -} - -static int shutdown_event(struct notifier_block *notifier, - unsigned long event, - void *data) -{ - setup_shutdown_watcher(); - return NOTIFY_DONE; -} - -static int __init setup_shutdown_event(void) -{ - static struct notifier_block xenstore_notifier = { - .notifier_call = shutdown_event - }; - register_xenstore_notifier(&xenstore_notifier); - - return 0; -} - -subsys_initcall(setup_shutdown_event); diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile index 37af04f1ffd9..363286c54290 100644 --- a/drivers/xen/Makefile +++ b/drivers/xen/Makefile @@ -1,4 +1,4 @@ -obj-y += grant-table.o features.o events.o +obj-y += grant-table.o features.o events.o manage.o obj-y += xenbus/ obj-$(CONFIG_XEN_XENCOMM) += xencomm.o obj-$(CONFIG_XEN_BALLOON) += balloon.o diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c new file mode 100644 index 000000000000..aa7af9e6abc0 --- /dev/null +++ b/drivers/xen/manage.c @@ -0,0 +1,143 @@ +/* + * Handle extern requests for shutdown, reboot and sysrq + */ +#include +#include +#include +#include + +#include + +#define SHUTDOWN_INVALID -1 +#define SHUTDOWN_POWEROFF 0 +#define SHUTDOWN_SUSPEND 2 +/* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only + * report a crash, not be instructed to crash! + * HALT is the same as POWEROFF, as far as we're concerned. The tools use + * the distinction when we return the reason code to them. + */ +#define SHUTDOWN_HALT 4 + +/* Ignore multiple shutdown requests. */ +static int shutting_down = SHUTDOWN_INVALID; + +static void shutdown_handler(struct xenbus_watch *watch, + const char **vec, unsigned int len) +{ + char *str; + struct xenbus_transaction xbt; + int err; + + if (shutting_down != SHUTDOWN_INVALID) + return; + + again: + err = xenbus_transaction_start(&xbt); + if (err) + return; + + str = (char *)xenbus_read(xbt, "control", "shutdown", NULL); + /* Ignore read errors and empty reads. */ + if (XENBUS_IS_ERR_READ(str)) { + xenbus_transaction_end(xbt, 1); + return; + } + + xenbus_write(xbt, "control", "shutdown", ""); + + err = xenbus_transaction_end(xbt, 0); + if (err == -EAGAIN) { + kfree(str); + goto again; + } + + if (strcmp(str, "poweroff") == 0 || + strcmp(str, "halt") == 0) + orderly_poweroff(false); + else if (strcmp(str, "reboot") == 0) + ctrl_alt_del(); + else { + printk(KERN_INFO "Ignoring shutdown request: %s\n", str); + shutting_down = SHUTDOWN_INVALID; + } + + kfree(str); +} + +static void sysrq_handler(struct xenbus_watch *watch, const char **vec, + unsigned int len) +{ + char sysrq_key = '\0'; + struct xenbus_transaction xbt; + int err; + + again: + err = xenbus_transaction_start(&xbt); + if (err) + return; + if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) { + printk(KERN_ERR "Unable to read sysrq code in " + "control/sysrq\n"); + xenbus_transaction_end(xbt, 1); + return; + } + + if (sysrq_key != '\0') + xenbus_printf(xbt, "control", "sysrq", "%c", '\0'); + + err = xenbus_transaction_end(xbt, 0); + if (err == -EAGAIN) + goto again; + + if (sysrq_key != '\0') + handle_sysrq(sysrq_key, NULL); +} + +static struct xenbus_watch shutdown_watch = { + .node = "control/shutdown", + .callback = shutdown_handler +}; + +static struct xenbus_watch sysrq_watch = { + .node = "control/sysrq", + .callback = sysrq_handler +}; + +static int setup_shutdown_watcher(void) +{ + int err; + + err = register_xenbus_watch(&shutdown_watch); + if (err) { + printk(KERN_ERR "Failed to set shutdown watcher\n"); + return err; + } + + err = register_xenbus_watch(&sysrq_watch); + if (err) { + printk(KERN_ERR "Failed to set sysrq watcher\n"); + return err; + } + + return 0; +} + +static int shutdown_event(struct notifier_block *notifier, + unsigned long event, + void *data) +{ + setup_shutdown_watcher(); + return NOTIFY_DONE; +} + +static int __init setup_shutdown_event(void) +{ + static struct notifier_block xenstore_notifier = { + .notifier_call = shutdown_event + }; + register_xenstore_notifier(&xenstore_notifier); + + return 0; +} + +subsys_initcall(setup_shutdown_event); -- cgit v1.2.3 From a90971ebddc81330f59203dee9803512aa4e2ef6 Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Mon, 26 May 2008 23:31:14 +0100 Subject: xen: compilation fix to balloon driver for ia64 support fix compilation error of ballon driver on ia64. extent_start member is pointer argument. On x86 pointer argument for xen hypercall is passed as virtual address. On the other hand, ia64 and ppc, pointer argument is passed in pseudo physical address. (guest physicall address.) So they must be passed as handle and convert right before issuing hypercall. CC drivers/xen/balloon.o linux-2.6-x86/drivers/xen/balloon.c: In function 'increase_reservation': linux-2.6-x86/drivers/xen/balloon.c:228: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'decrease_reservation': linux-2.6-x86/drivers/xen/balloon.c:324: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'dealloc_pte_fn': linux-2.6-x86/drivers/xen/balloon.c:486: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'alloc_empty_pages_and_pagevec': linux-2.6-x86/drivers/xen/balloon.c:522: error: incompatible types in assignment make[2]: *** [drivers/xen/balloon.o] Error 1 Signed-off-by: Isaku Yamahata Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/xen/balloon.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index ab25ba6cbbb9..097ba02ac809 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -225,7 +225,7 @@ static int increase_reservation(unsigned long nr_pages) page = balloon_next_page(page); } - reservation.extent_start = (unsigned long)frame_list; + set_xen_guest_handle(reservation.extent_start, frame_list); reservation.nr_extents = nr_pages; rc = HYPERVISOR_memory_op( XENMEM_populate_physmap, &reservation); @@ -321,7 +321,7 @@ static int decrease_reservation(unsigned long nr_pages) balloon_append(pfn_to_page(pfn)); } - reservation.extent_start = (unsigned long)frame_list; + set_xen_guest_handle(reservation.extent_start, frame_list); reservation.nr_extents = nr_pages; ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation); BUG_ON(ret != nr_pages); @@ -483,7 +483,7 @@ static int dealloc_pte_fn( .extent_order = 0, .domid = DOMID_SELF }; - reservation.extent_start = (unsigned long)&mfn; + set_xen_guest_handle(reservation.extent_start, &mfn); set_pte_at(&init_mm, addr, pte, __pte_ma(0ull)); set_phys_to_machine(__pa(addr) >> PAGE_SHIFT, INVALID_P2M_ENTRY); ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation); @@ -519,7 +519,7 @@ static struct page **alloc_empty_pages_and_pagevec(int nr_pages) .extent_order = 0, .domid = DOMID_SELF }; - reservation.extent_start = (unsigned long)&gmfn; + set_xen_guest_handle(reservation.extent_start, &gmfn); ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation); if (ret == 1) -- cgit v1.2.3 From bfdab126cfa6fe3c2ddb8b6007a38202b510b6c1 Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Mon, 26 May 2008 23:31:15 +0100 Subject: xen: add missing definitions in include/xen/interface/memory.h which ia64/xen needs Add xen handles realted definitions for xen memory which ia64/xen needs. Pointer argumsnts for ia64/xen hypercall are passed in pseudo physical address (guest physical address) so that it is required to convert guest kernel virtual address into pseudo physical address. The xen guest handle represents such arguments. Signed-off-by: Isaku Yamahata Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- include/xen/interface/memory.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h index da768469aa92..af36ead16817 100644 --- a/include/xen/interface/memory.h +++ b/include/xen/interface/memory.h @@ -29,7 +29,7 @@ struct xen_memory_reservation { * OUT: GMFN bases of extents that were allocated * (NB. This command also updates the mach_to_phys translation table) */ - ulong extent_start; + GUEST_HANDLE(ulong) extent_start; /* Number of extents, and size/alignment of each (2^extent_order pages). */ unsigned long nr_extents; @@ -50,6 +50,7 @@ struct xen_memory_reservation { domid_t domid; }; +DEFINE_GUEST_HANDLE_STRUCT(xen_memory_reservation); /* * Returns the maximum machine frame number of mapped RAM in this system. @@ -85,7 +86,7 @@ struct xen_machphys_mfn_list { * any large discontiguities in the machine address space, 2MB gaps in * the machphys table will be represented by an MFN base of zero. */ - ulong extent_start; + GUEST_HANDLE(ulong) extent_start; /* * Number of extents written to the above array. This will be smaller @@ -93,6 +94,7 @@ struct xen_machphys_mfn_list { */ unsigned int nr_extents; }; +DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list); /* * Sets the GPFN at which a particular page appears in the specified guest's @@ -115,6 +117,7 @@ struct xen_add_to_physmap { /* GPFN where the source mapping page should appear. */ unsigned long gpfn; }; +DEFINE_GUEST_HANDLE_STRUCT(xen_add_to_physmap); /* * Translates a list of domain-specific GPFNs into MFNs. Returns a -ve error @@ -129,13 +132,14 @@ struct xen_translate_gpfn_list { unsigned long nr_gpfns; /* List of GPFNs to translate. */ - ulong gpfn_list; + GUEST_HANDLE(ulong) gpfn_list; /* * Output list to contain MFN translations. May be the same as the input * list (in which case each input GPFN is overwritten with the output MFN). */ - ulong mfn_list; + GUEST_HANDLE(ulong) mfn_list; }; +DEFINE_GUEST_HANDLE_STRUCT(xen_translate_gpfn_list); #endif /* __XEN_PUBLIC_MEMORY_H__ */ -- cgit v1.2.3 From 38bb5ab4179572f4d24d3ca7188172a31ca51a69 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:16 +0100 Subject: xen: count resched interrupts properly Make sure resched interrupts appear in /proc/interrupts in the proper place. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/smp.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 94e69000f982..74ab8968c525 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -65,6 +65,12 @@ static struct call_data_struct *call_data; */ static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id) { +#ifdef CONFIG_X86_32 + __get_cpu_var(irq_stat).irq_resched_count++; +#else + add_pda(irq_resched_count, 1); +#endif + return IRQ_HANDLED; } -- cgit v1.2.3 From 955d6f1778da5a9795f2dfb07f760006f194609a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 26 May 2008 23:31:17 +0100 Subject: xen: drivers/xen/balloon.c: make a function static Make the needlessly global balloon_set_new_target() static. Signed-off-by: Adrian Bunk Acked-by: Chris Wright Signed-off-by: Andrew Morton Signed-off-by: Thomas Gleixner --- drivers/xen/balloon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 097ba02ac809..591bc29b55f5 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -368,7 +368,7 @@ static void balloon_process(struct work_struct *work) } /* Resets the Xen limit, sets new target, and kicks off processing. */ -void balloon_set_new_target(unsigned long target) +static void balloon_set_new_target(unsigned long target) { /* No need for lock. Not read-modify-write updates. */ balloon_stats.hard_limit = ~0UL; -- cgit v1.2.3 From d451bb7aa852627bdf7be7937dc3d9d9f261b235 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:18 +0100 Subject: xen: make phys_to_machine structure dynamic We now support the use of memory hotplug, so the physical to machine page mapping structure must be dynamic. This is implemented as a two-level radix tree structure, which allows us to efficiently incrementally allocate memory for the p2m table as new pages are added. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 2 +- arch/x86/xen/mmu.c | 85 ++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/xen/setup.c | 2 -- arch/x86/xen/xen-ops.h | 2 ++ include/asm-x86/xen/page.h | 20 ++++------- 5 files changed, 94 insertions(+), 17 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 5c0635a8bffd..73d3c84a3495 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1221,7 +1221,7 @@ asmlinkage void __init xen_start_kernel(void) /* Get mfn list */ if (!xen_feature(XENFEAT_auto_translated_physmap)) - phys_to_machine_mapping = (unsigned long *)xen_start_info->mfn_list; + xen_build_dynamic_phys_to_machine(); pgd = (pgd_t *)xen_start_info->pt_base; diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 07c2653ec335..c3b27dec6f03 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -56,6 +56,91 @@ #include "multicalls.h" #include "mmu.h" +/* + * This should probably be a config option. On 32-bit, it costs 1 + * page/gig of memory; on 64-bit its 2 pages/gig. If we want it to be + * completely unbounded we can add another level to the p2m structure. + */ +#define MAX_GUEST_PAGES (16ull * 1024*1024*1024 / PAGE_SIZE) +#define P2M_ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(unsigned long)) + +static unsigned long *p2m_top[MAX_GUEST_PAGES / P2M_ENTRIES_PER_PAGE]; + +static inline unsigned p2m_top_index(unsigned long pfn) +{ + BUG_ON(pfn >= MAX_GUEST_PAGES); + return pfn / P2M_ENTRIES_PER_PAGE; +} + +static inline unsigned p2m_index(unsigned long pfn) +{ + return pfn % P2M_ENTRIES_PER_PAGE; +} + +void __init xen_build_dynamic_phys_to_machine(void) +{ + unsigned pfn; + unsigned long *mfn_list = (unsigned long *)xen_start_info->mfn_list; + + BUG_ON(xen_start_info->nr_pages >= MAX_GUEST_PAGES); + + for(pfn = 0; + pfn < xen_start_info->nr_pages; + pfn += P2M_ENTRIES_PER_PAGE) { + unsigned topidx = p2m_top_index(pfn); + + p2m_top[topidx] = &mfn_list[pfn]; + } +} + +unsigned long get_phys_to_machine(unsigned long pfn) +{ + unsigned topidx, idx; + + topidx = p2m_top_index(pfn); + if (p2m_top[topidx] == NULL) + return INVALID_P2M_ENTRY; + + idx = p2m_index(pfn); + return p2m_top[topidx][idx]; +} + +static void alloc_p2m(unsigned long **pp) +{ + unsigned long *p; + unsigned i; + + p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL); + BUG_ON(p == NULL); + + for(i = 0; i < P2M_ENTRIES_PER_PAGE; i++) + p[i] = INVALID_P2M_ENTRY; + + if (cmpxchg(pp, NULL, p) != NULL) + free_page((unsigned long)p); +} + +void set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + unsigned topidx, idx; + + if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) { + BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); + return; + } + + topidx = p2m_top_index(pfn); + if (p2m_top[topidx] == NULL) { + /* no need to allocate a page to store an invalid entry */ + if (mfn == INVALID_P2M_ENTRY) + return; + alloc_p2m(&p2m_top[topidx]); + } + + idx = p2m_index(pfn); + p2m_top[topidx][idx] = mfn; +} + xmaddr_t arbitrary_virt_to_machine(unsigned long address) { unsigned int level; diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 82517e4a752a..37f8f0b8f743 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -27,8 +27,6 @@ extern const char xen_hypervisor_callback[]; extern const char xen_failsafe_callback[]; -unsigned long *phys_to_machine_mapping; -EXPORT_SYMBOL(phys_to_machine_mapping); /** * machine_specific_memory_setup - Hook for machine specific memory setup. diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index f1063ae08037..7bdc8c5c9244 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -22,6 +22,8 @@ void __init xen_arch_setup(void); void __init xen_init_IRQ(void); void xen_enable_sysenter(void); +void __init xen_build_dynamic_phys_to_machine(void); + void xen_setup_timer(int cpu); void xen_setup_cpu_clockevents(void); unsigned long xen_cpu_khz(void); diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h index e11f24038b1d..293344f8102e 100644 --- a/include/asm-x86/xen/page.h +++ b/include/asm-x86/xen/page.h @@ -26,15 +26,15 @@ typedef struct xpaddr { #define FOREIGN_FRAME_BIT (1UL<<31) #define FOREIGN_FRAME(m) ((m) | FOREIGN_FRAME_BIT) -extern unsigned long *phys_to_machine_mapping; +extern unsigned long get_phys_to_machine(unsigned long pfn); +extern void set_phys_to_machine(unsigned long pfn, unsigned long mfn); static inline unsigned long pfn_to_mfn(unsigned long pfn) { if (xen_feature(XENFEAT_auto_translated_physmap)) return pfn; - return phys_to_machine_mapping[(unsigned int)(pfn)] & - ~FOREIGN_FRAME_BIT; + return get_phys_to_machine(pfn) & ~FOREIGN_FRAME_BIT; } static inline int phys_to_machine_mapping_valid(unsigned long pfn) @@ -42,7 +42,7 @@ static inline int phys_to_machine_mapping_valid(unsigned long pfn) if (xen_feature(XENFEAT_auto_translated_physmap)) return 1; - return (phys_to_machine_mapping[pfn] != INVALID_P2M_ENTRY); + return get_phys_to_machine(pfn) != INVALID_P2M_ENTRY; } static inline unsigned long mfn_to_pfn(unsigned long mfn) @@ -106,20 +106,12 @@ static inline unsigned long mfn_to_local_pfn(unsigned long mfn) unsigned long pfn = mfn_to_pfn(mfn); if ((pfn < max_mapnr) && !xen_feature(XENFEAT_auto_translated_physmap) - && (phys_to_machine_mapping[pfn] != mfn)) + && (get_phys_to_machine(pfn) != mfn)) return max_mapnr; /* force !pfn_valid() */ + /* XXX fixme; not true with sparsemem */ return pfn; } -static inline void set_phys_to_machine(unsigned long pfn, unsigned long mfn) -{ - if (xen_feature(XENFEAT_auto_translated_physmap)) { - BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY); - return; - } - phys_to_machine_mapping[pfn] = mfn; -} - /* VIRT <-> MACHINE conversion */ #define virt_to_machine(v) (phys_to_machine(XPADDR(__pa(v)))) #define virt_to_mfn(v) (pfn_to_mfn(PFN_DOWN(__pa(v)))) -- cgit v1.2.3 From 8006ec3e911f93d702e1d4a4e387e244ab434924 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:19 +0100 Subject: xen: add configurable max domain size Add a config option to set the max size of a Xen domain. This is used to scale the size of the physical-to-machine array; it ends up using around 1 page/GByte, so there's no reason to be very restrictive. For a 32-bit guest, the default value of 8GB is probably sufficient; there's not much point in giving a 32-bit machine much more memory than that. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/Kconfig | 10 ++++++++++ arch/x86/xen/mmu.c | 25 ++++++++++++------------- arch/x86/xen/setup.c | 3 +++ include/asm-x86/xen/page.h | 5 +++++ 4 files changed, 30 insertions(+), 13 deletions(-) diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 525b108411bd..d0f1c7c5dc3d 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -11,3 +11,13 @@ config XEN This is the Linux Xen port. Enabling this will allow the kernel to boot in a paravirtualized environment under the Xen hypervisor. + +config XEN_MAX_DOMAIN_MEMORY + int "Maximum allowed size of a domain in gigabytes" + default 8 + depends on XEN + help + The pseudo-physical to machine address array is sized + according to the maximum possible memory size of a Xen + domain. This array uses 1 page per gigabyte, so there's no + need to be too stingy here. \ No newline at end of file diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index c3b27dec6f03..644232aa7bfb 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -56,19 +56,13 @@ #include "multicalls.h" #include "mmu.h" -/* - * This should probably be a config option. On 32-bit, it costs 1 - * page/gig of memory; on 64-bit its 2 pages/gig. If we want it to be - * completely unbounded we can add another level to the p2m structure. - */ -#define MAX_GUEST_PAGES (16ull * 1024*1024*1024 / PAGE_SIZE) #define P2M_ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(unsigned long)) -static unsigned long *p2m_top[MAX_GUEST_PAGES / P2M_ENTRIES_PER_PAGE]; +static unsigned long *p2m_top[MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE]; static inline unsigned p2m_top_index(unsigned long pfn) { - BUG_ON(pfn >= MAX_GUEST_PAGES); + BUG_ON(pfn >= MAX_DOMAIN_PAGES); return pfn / P2M_ENTRIES_PER_PAGE; } @@ -81,12 +75,9 @@ void __init xen_build_dynamic_phys_to_machine(void) { unsigned pfn; unsigned long *mfn_list = (unsigned long *)xen_start_info->mfn_list; + unsigned long max_pfn = min(MAX_DOMAIN_PAGES, xen_start_info->nr_pages); - BUG_ON(xen_start_info->nr_pages >= MAX_GUEST_PAGES); - - for(pfn = 0; - pfn < xen_start_info->nr_pages; - pfn += P2M_ENTRIES_PER_PAGE) { + for(pfn = 0; pfn < max_pfn; pfn += P2M_ENTRIES_PER_PAGE) { unsigned topidx = p2m_top_index(pfn); p2m_top[topidx] = &mfn_list[pfn]; @@ -97,6 +88,9 @@ unsigned long get_phys_to_machine(unsigned long pfn) { unsigned topidx, idx; + if (unlikely(pfn >= MAX_DOMAIN_PAGES)) + return INVALID_P2M_ENTRY; + topidx = p2m_top_index(pfn); if (p2m_top[topidx] == NULL) return INVALID_P2M_ENTRY; @@ -129,6 +123,11 @@ void set_phys_to_machine(unsigned long pfn, unsigned long mfn) return; } + if (unlikely(pfn >= MAX_DOMAIN_PAGES)) { + BUG_ON(mfn != INVALID_P2M_ENTRY); + return; + } + topidx = p2m_top_index(pfn); if (p2m_top[topidx] == NULL) { /* no need to allocate a page to store an invalid entry */ diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 37f8f0b8f743..488447878a9d 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -16,6 +16,7 @@ #include #include +#include #include #include #include @@ -36,6 +37,8 @@ char * __init xen_memory_setup(void) { unsigned long max_pfn = xen_start_info->nr_pages; + max_pfn = min(MAX_DOMAIN_PAGES, max_pfn); + e820.nr_map = 0; add_memory_region(0, LOWMEMSIZE(), E820_RAM); add_memory_region(HIGH_MEMORY, PFN_PHYS(max_pfn)-HIGH_MEMORY, E820_RAM); diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h index 293344f8102e..377c04591c15 100644 --- a/include/asm-x86/xen/page.h +++ b/include/asm-x86/xen/page.h @@ -26,6 +26,11 @@ typedef struct xpaddr { #define FOREIGN_FRAME_BIT (1UL<<31) #define FOREIGN_FRAME(m) ((m) | FOREIGN_FRAME_BIT) +/* Maximum amount of memory we can handle in a domain in pages */ +#define MAX_DOMAIN_PAGES \ + ((unsigned long)((u64)CONFIG_XEN_MAX_DOMAIN_MEMORY * 1024 * 1024 * 1024 / PAGE_SIZE)) + + extern unsigned long get_phys_to_machine(unsigned long pfn); extern void set_phys_to_machine(unsigned long pfn, unsigned long mfn); -- cgit v1.2.3 From cf0923ea295ba08ae656ef04164a43cb6553ba99 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:20 +0100 Subject: xen: efficiently support a holey p2m table When using sparsemem and memory hotplug, the kernel's pseudo-physical address space can be discontigious. Previously this was dealt with by having the upper parts of the radix tree stubbed off. Unfortunately, this is incompatible with save/restore, which requires a complete p2m table. The solution is to have a special distinguished all-invalid p2m leaf page, which we can point all the hole areas at. This allows the tools to see a complete p2m table, but it only costs a page for all memory holes. It also simplifies the code since it removes a few special cases. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/mmu.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 644232aa7bfb..da7b45b05066 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -57,8 +57,17 @@ #include "mmu.h" #define P2M_ENTRIES_PER_PAGE (PAGE_SIZE / sizeof(unsigned long)) +#define TOP_ENTRIES (MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE) -static unsigned long *p2m_top[MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE]; +/* Placeholder for holes in the address space */ +static unsigned long p2m_missing[P2M_ENTRIES_PER_PAGE] + __attribute__((section(".data.page_aligned"))) = + { [ 0 ... P2M_ENTRIES_PER_PAGE-1 ] = ~0UL }; + + /* Array of pointers to pages containing p2m entries */ +static unsigned long *p2m_top[TOP_ENTRIES] + __attribute__((section(".data.page_aligned"))) = + { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] }; static inline unsigned p2m_top_index(unsigned long pfn) { @@ -92,9 +101,6 @@ unsigned long get_phys_to_machine(unsigned long pfn) return INVALID_P2M_ENTRY; topidx = p2m_top_index(pfn); - if (p2m_top[topidx] == NULL) - return INVALID_P2M_ENTRY; - idx = p2m_index(pfn); return p2m_top[topidx][idx]; } @@ -110,7 +116,7 @@ static void alloc_p2m(unsigned long **pp) for(i = 0; i < P2M_ENTRIES_PER_PAGE; i++) p[i] = INVALID_P2M_ENTRY; - if (cmpxchg(pp, NULL, p) != NULL) + if (cmpxchg(pp, p2m_missing, p) != p2m_missing) free_page((unsigned long)p); } @@ -129,7 +135,7 @@ void set_phys_to_machine(unsigned long pfn, unsigned long mfn) } topidx = p2m_top_index(pfn); - if (p2m_top[topidx] == NULL) { + if (p2m_top[topidx] == p2m_missing) { /* no need to allocate a page to store an invalid entry */ if (mfn == INVALID_P2M_ENTRY) return; -- cgit v1.2.3 From a0d695c821544947342a2d372ec4108bc813b979 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:21 +0100 Subject: xen: make dummy_shared_info non-static Rename dummy_shared_info to xen_dummy_shared_info and make it non-static, in anticipation of users outside of enlighten.c Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 6 +++--- arch/x86/xen/xen-ops.h | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 73d3c84a3495..d9faaa26c104 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -75,13 +75,13 @@ DEFINE_PER_CPU(unsigned long, xen_current_cr3); /* actual vcpu cr3 */ struct start_info *xen_start_info; EXPORT_SYMBOL_GPL(xen_start_info); -static /* __initdata */ struct shared_info dummy_shared_info; +struct shared_info xen_dummy_shared_info; /* * Point at some empty memory to start with. We map the real shared_info * page as soon as fixmap is up and running. */ -struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info; +struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; /* * Flag to determine whether vcpu info placement is available on all @@ -104,7 +104,7 @@ static void __init xen_vcpu_setup(int cpu) int err; struct vcpu_info *vcpup; - BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info); + BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; if (!have_vcpu_info_placement) diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 7bdc8c5c9244..826d6e4c3dac 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -15,6 +15,7 @@ DECLARE_PER_CPU(unsigned long, xen_cr3); DECLARE_PER_CPU(unsigned long, xen_current_cr3); extern struct start_info *xen_start_info; +extern struct shared_info xen_dummy_shared_info; extern struct shared_info *HYPERVISOR_shared_info; char * __init xen_memory_setup(void); -- cgit v1.2.3 From d5edbc1f75420935b1ec7e65df10c8f81cea82de Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:22 +0100 Subject: xen: add p2m mfn_list_list When saving a domain, the Xen tools need to remap all our mfns to portable pfns. In order to remap our p2m table, it needs to know where all its pages are, so maintain the references to the p2m table for it to use. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/enlighten.c | 2 ++ arch/x86/xen/mmu.c | 39 ++++++++++++++++++++++++++++++++++++--- arch/x86/xen/xen-ops.h | 2 ++ 3 files changed, 40 insertions(+), 3 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index d9faaa26c104..ce67dc8f36af 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -880,6 +880,8 @@ static __init void setup_shared_info(void) /* In UP this is as good a place as any to set up shared info */ xen_setup_vcpu_info_placement(); #endif + + xen_setup_mfn_list_list(); } static __init void xen_pagetable_setup_done(pgd_t *base) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index da7b45b05066..4740cda36563 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -69,6 +69,13 @@ static unsigned long *p2m_top[TOP_ENTRIES] __attribute__((section(".data.page_aligned"))) = { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] }; +/* Arrays of p2m arrays expressed in mfns used for save/restore */ +static unsigned long p2m_top_mfn[TOP_ENTRIES] + __attribute__((section(".bss.page_aligned"))); + +static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE] + __attribute__((section(".bss.page_aligned"))); + static inline unsigned p2m_top_index(unsigned long pfn) { BUG_ON(pfn >= MAX_DOMAIN_PAGES); @@ -80,11 +87,35 @@ static inline unsigned p2m_index(unsigned long pfn) return pfn % P2M_ENTRIES_PER_PAGE; } +/* Build the parallel p2m_top_mfn structures */ +void xen_setup_mfn_list_list(void) +{ + unsigned pfn, idx; + + for(pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_ENTRIES_PER_PAGE) { + unsigned topidx = p2m_top_index(pfn); + + p2m_top_mfn[topidx] = virt_to_mfn(p2m_top[topidx]); + } + + for(idx = 0; idx < ARRAY_SIZE(p2m_top_mfn_list); idx++) { + unsigned topidx = idx * P2M_ENTRIES_PER_PAGE; + p2m_top_mfn_list[idx] = virt_to_mfn(&p2m_top_mfn[topidx]); + } + + BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info); + + HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list = + virt_to_mfn(p2m_top_mfn_list); + HYPERVISOR_shared_info->arch.max_pfn = xen_start_info->nr_pages; +} + +/* Set up p2m_top to point to the domain-builder provided p2m pages */ void __init xen_build_dynamic_phys_to_machine(void) { - unsigned pfn; unsigned long *mfn_list = (unsigned long *)xen_start_info->mfn_list; unsigned long max_pfn = min(MAX_DOMAIN_PAGES, xen_start_info->nr_pages); + unsigned pfn; for(pfn = 0; pfn < max_pfn; pfn += P2M_ENTRIES_PER_PAGE) { unsigned topidx = p2m_top_index(pfn); @@ -105,7 +136,7 @@ unsigned long get_phys_to_machine(unsigned long pfn) return p2m_top[topidx][idx]; } -static void alloc_p2m(unsigned long **pp) +static void alloc_p2m(unsigned long **pp, unsigned long *mfnp) { unsigned long *p; unsigned i; @@ -118,6 +149,8 @@ static void alloc_p2m(unsigned long **pp) if (cmpxchg(pp, p2m_missing, p) != p2m_missing) free_page((unsigned long)p); + else + *mfnp = virt_to_mfn(p); } void set_phys_to_machine(unsigned long pfn, unsigned long mfn) @@ -139,7 +172,7 @@ void set_phys_to_machine(unsigned long pfn, unsigned long mfn) /* no need to allocate a page to store an invalid entry */ if (mfn == INVALID_P2M_ENTRY) return; - alloc_p2m(&p2m_top[topidx]); + alloc_p2m(&p2m_top[topidx], &p2m_top_mfn[topidx]); } idx = p2m_index(pfn); diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 826d6e4c3dac..a1bc89a8f169 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -18,6 +18,8 @@ extern struct start_info *xen_start_info; extern struct shared_info xen_dummy_shared_info; extern struct shared_info *HYPERVISOR_shared_info; +void xen_setup_mfn_list_list(void); + char * __init xen_memory_setup(void); void __init xen_arch_setup(void); void __init xen_init_IRQ(void); -- cgit v1.2.3 From eb1e305f4ef201e549ffd475b7dcbcd4ec36d7dc Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:23 +0100 Subject: xen: add rebind_evtchn_irq Add rebind_evtchn_irq(), which will rebind an device driver's existing irq to a new event channel on restore. Since the new event channel will be masked and bound to vcpu0, we update the state accordingly and unmask the irq once everything is set up. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/xen/events.c | 27 +++++++++++++++++++++++++++ include/xen/events.h | 1 + 2 files changed, 28 insertions(+) diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 4f0f22b020ea..f64e9798129c 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -557,6 +557,33 @@ out: put_cpu(); } +/* Rebind a new event channel to an existing irq. */ +void rebind_evtchn_irq(int evtchn, int irq) +{ + /* Make sure the irq is masked, since the new event channel + will also be masked. */ + disable_irq(irq); + + spin_lock(&irq_mapping_update_lock); + + /* After resume the irq<->evtchn mappings are all cleared out */ + BUG_ON(evtchn_to_irq[evtchn] != -1); + /* Expect irq to have been bound before, + so the bindcount should be non-0 */ + BUG_ON(irq_bindcount[irq] == 0); + + evtchn_to_irq[evtchn] = irq; + irq_info[irq] = mk_irq_info(IRQT_EVTCHN, 0, evtchn); + + spin_unlock(&irq_mapping_update_lock); + + /* new event channels are always bound to cpu 0 */ + irq_set_affinity(irq, cpumask_of_cpu(0)); + + /* Unmask the event channel. */ + enable_irq(irq); +} + /* Rebind an evtchn so that it gets delivered to a specific cpu */ static void rebind_irq_to_cpu(unsigned irq, unsigned tcpu) { diff --git a/include/xen/events.h b/include/xen/events.h index acd8e062c85f..a82ec0c45c38 100644 --- a/include/xen/events.h +++ b/include/xen/events.h @@ -32,6 +32,7 @@ void unbind_from_irqhandler(unsigned int irq, void *dev_id); void xen_send_IPI_one(unsigned int cpu, enum ipi_vector vector); int resend_irq_on_evtchn(unsigned int irq); +void rebind_evtchn_irq(int evtchn, int irq); static inline void notify_remote_via_evtchn(int port) { -- cgit v1.2.3 From 0f2287ad7c61f10b2a22a06e2a66cdbbbfc44ad0 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:24 +0100 Subject: xen: fix unbind_from_irq() Rearrange the tests in unbind_from_irq() so that we can still unbind an irq even if the underlying event channel is bad. This allows a device driver to shuffle its irqs on save/restore before the underlying event channels have been fixed up. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/xen/events.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/xen/events.c b/drivers/xen/events.c index f64e9798129c..70375a690761 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -355,7 +355,7 @@ static void unbind_from_irq(unsigned int irq) spin_lock(&irq_mapping_update_lock); - if (VALID_EVTCHN(evtchn) && (--irq_bindcount[irq] == 0)) { + if ((--irq_bindcount[irq] == 0) && VALID_EVTCHN(evtchn)) { close.port = evtchn; if (HYPERVISOR_event_channel_op(EVTCHNOP_close, &close) != 0) BUG(); @@ -375,7 +375,7 @@ static void unbind_from_irq(unsigned int irq) evtchn_to_irq[evtchn] = -1; irq_info[irq] = IRQ_UNBOUND; - dynamic_irq_init(irq); + dynamic_irq_cleanup(irq); } spin_unlock(&irq_mapping_update_lock); -- cgit v1.2.3 From 6b9b732d0e396a3f1a95977162a8624aafce38a1 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:25 +0100 Subject: xen-console: add save/restore Add code to: 1. Deal with the console page being canonicalized. During save, the console's mfn in the start_info structure is canonicalized to a pfn. In order to deal with that, we always use a copy of the pfn and indirect off that all the time. However, we fall back to using the mfn if the pfn hasn't been initialized yet. 2. Restore the console event channel, and rebind it to the existing irq. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/char/hvc_xen.c | 25 +++++++++++++++++++++---- include/xen/hvc-console.h | 2 ++ 2 files changed, 23 insertions(+), 4 deletions(-) diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index d5fe0a8952fa..db2ae4216279 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -39,9 +39,14 @@ static int xencons_irq; /* ------------------------------------------------------------------ */ +static unsigned long console_pfn = ~0ul; + static inline struct xencons_interface *xencons_interface(void) { - return mfn_to_virt(xen_start_info->console.domU.mfn); + if (console_pfn == ~0ul) + return mfn_to_virt(xen_start_info->console.domU.mfn); + else + return __va(console_pfn << PAGE_SHIFT); } static inline void notify_daemon(void) @@ -101,20 +106,32 @@ static int __init xen_init(void) { struct hvc_struct *hp; - if (!is_running_on_xen()) - return 0; + if (!is_running_on_xen() || + is_initial_xendomain() || + !xen_start_info->console.domU.evtchn) + return -ENODEV; xencons_irq = bind_evtchn_to_irq(xen_start_info->console.domU.evtchn); if (xencons_irq < 0) - xencons_irq = 0 /* NO_IRQ */; + xencons_irq = 0; /* NO_IRQ */ + hp = hvc_alloc(HVC_COOKIE, xencons_irq, &hvc_ops, 256); if (IS_ERR(hp)) return PTR_ERR(hp); hvc = hp; + + console_pfn = mfn_to_pfn(xen_start_info->console.domU.mfn); + return 0; } +void xen_console_resume(void) +{ + if (xencons_irq) + rebind_evtchn_irq(xen_start_info->console.domU.evtchn, xencons_irq); +} + static void __exit xen_fini(void) { if (hvc) diff --git a/include/xen/hvc-console.h b/include/xen/hvc-console.h index efc3237ab990..fd5483a059bb 100644 --- a/include/xen/hvc-console.h +++ b/include/xen/hvc-console.h @@ -3,6 +3,8 @@ extern struct console xenboot_console; +void xen_console_resume(void); + void xen_raw_console_write(const char *str); void xen_raw_printk(const char *fmt, ...); -- cgit v1.2.3 From 7d88d32a4670af583c896e5ecd3929b78538ca62 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:26 +0100 Subject: xenbus: rebind irq on restore When restoring, rebind the existing xenbus irq to the new xenbus event channel. (It turns out in practice that this is always the same, and is never updated on restore. That's a bug, but Xeno-linux has been like this for a long time, so it can't really be fixed.) Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- drivers/xen/xenbus/xenbus_comms.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/xen/xenbus/xenbus_comms.c b/drivers/xen/xenbus/xenbus_comms.c index 6efbe3f29ca5..090c61ee8fd0 100644 --- a/drivers/xen/xenbus/xenbus_comms.c +++ b/drivers/xen/xenbus/xenbus_comms.c @@ -203,7 +203,6 @@ int xb_read(void *data, unsigned len) int xb_init_comms(void) { struct xenstore_domain_interface *intf = xen_store_interface; - int err; if (intf->req_prod != intf->req_cons) printk(KERN_ERR "XENBUS request ring is not quiescent " @@ -216,18 +215,20 @@ int xb_init_comms(void) intf->rsp_cons = intf->rsp_prod; } - if (xenbus_irq) - unbind_from_irqhandler(xenbus_irq, &xb_waitq); + if (xenbus_irq) { + /* Already have an irq; assume we're resuming */ + rebind_evtchn_irq(xen_store_evtchn, xenbus_irq); + } else { + int err; + err = bind_evtchn_to_irqhandler(xen_store_evtchn, wake_waiting, + 0, "xenbus", &xb_waitq); + if (err <= 0) { + printk(KERN_ERR "XENBUS request irq failed %i\n", err); + return err; + } - err = bind_evtchn_to_irqhandler( - xen_store_evtchn, wake_waiting, - 0, "xenbus", &xb_waitq); - if (err <= 0) { - printk(KERN_ERR "XENBUS request irq failed %i\n", err); - return err; + xenbus_irq = err; } - xenbus_irq = err; - return 0; } -- cgit v1.2.3 From 0e91398f2a5d4eb6b07df8115917d0d1cf3e9b58 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:27 +0100 Subject: xen: implement save/restore This patch implements Xen save/restore and migration. Saving is triggered via xenbus, which is polled in drivers/xen/manage.c. When a suspend request comes in, the kernel prepares itself for saving by: 1 - Freeze all processes. This is primarily to prevent any partially-completed pagetable updates from confusing the suspend process. If CONFIG_PREEMPT isn't defined, then this isn't necessary. 2 - Suspend xenbus and other devices 3 - Stop_machine, to make sure all the other vcpus are quiescent. The Xen tools require the domain to run its save off vcpu0. 4 - Within the stop_machine state, it pins any unpinned pgds (under construction or destruction), performs canonicalizes various other pieces of state (mostly converting mfns to pfns), and finally 5 - Suspend the domain Restore reverses the steps used to save the domain, ending when all the frozen processes are thawed. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/Makefile | 2 +- arch/x86/xen/enlighten.c | 6 +-- arch/x86/xen/mmu.c | 46 +++++++++++++++++ arch/x86/xen/smp.c | 2 +- arch/x86/xen/suspend.c | 42 +++++++++++++++ arch/x86/xen/time.c | 8 +++ arch/x86/xen/xen-ops.h | 4 ++ drivers/xen/events.c | 83 +++++++++++++++++++++++++++++ drivers/xen/grant-table.c | 4 +- drivers/xen/manage.c | 126 ++++++++++++++++++++++++++++++++++++++++----- include/linux/page-flags.h | 1 + include/xen/events.h | 3 ++ include/xen/grant_table.h | 3 ++ include/xen/xen-ops.h | 9 ++++ 14 files changed, 318 insertions(+), 21 deletions(-) create mode 100644 arch/x86/xen/suspend.c diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 40b119b6b103..2ba2d1649131 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -1,4 +1,4 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o \ - time.o xen-asm.o grant-table.o + time.o xen-asm.o grant-table.o suspend.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index ce67dc8f36af..b94f63ac228b 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -857,7 +857,7 @@ static __init void xen_pagetable_setup_start(pgd_t *base) PFN_DOWN(__pa(xen_start_info->pt_base))); } -static __init void setup_shared_info(void) +void xen_setup_shared_info(void) { if (!xen_feature(XENFEAT_auto_translated_physmap)) { unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP); @@ -894,7 +894,7 @@ static __init void xen_pagetable_setup_done(pgd_t *base) pv_mmu_ops.release_pmd = xen_release_pmd; pv_mmu_ops.set_pte = xen_set_pte; - setup_shared_info(); + xen_setup_shared_info(); /* Actually pin the pagetable down, but we can't set PG_pinned yet because the page structures don't exist yet. */ @@ -902,7 +902,7 @@ static __init void xen_pagetable_setup_done(pgd_t *base) } /* This is called once we have the cpu_possible_map */ -void __init xen_setup_vcpu_info_placement(void) +void xen_setup_vcpu_info_placement(void) { int cpu; diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 4740cda36563..e95955968ba3 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -560,6 +560,29 @@ void xen_pgd_pin(pgd_t *pgd) xen_mc_issue(0); } +/* + * On save, we need to pin all pagetables to make sure they get their + * mfns turned into pfns. Search the list for any unpinned pgds and pin + * them (unpinned pgds are not currently in use, probably because the + * process is under construction or destruction). + */ +void xen_mm_pin_all(void) +{ + unsigned long flags; + struct page *page; + + spin_lock_irqsave(&pgd_lock, flags); + + list_for_each_entry(page, &pgd_list, lru) { + if (!PagePinned(page)) { + xen_pgd_pin((pgd_t *)page_address(page)); + SetPageSavePinned(page); + } + } + + spin_unlock_irqrestore(&pgd_lock, flags); +} + /* The init_mm pagetable is really pinned as soon as its created, but that's before we have page structures to store the bits. So do all the book-keeping now. */ @@ -617,6 +640,29 @@ static void xen_pgd_unpin(pgd_t *pgd) xen_mc_issue(0); } +/* + * On resume, undo any pinning done at save, so that the rest of the + * kernel doesn't see any unexpected pinned pagetables. + */ +void xen_mm_unpin_all(void) +{ + unsigned long flags; + struct page *page; + + spin_lock_irqsave(&pgd_lock, flags); + + list_for_each_entry(page, &pgd_list, lru) { + if (PageSavePinned(page)) { + BUG_ON(!PagePinned(page)); + printk("unpinning pinned %p\n", page_address(page)); + xen_pgd_unpin((pgd_t *)page_address(page)); + ClearPageSavePinned(page); + } + } + + spin_unlock_irqrestore(&pgd_lock, flags); +} + void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next) { spin_lock(&next->page_table_lock); diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 74ab8968c525..d2e3c20127d7 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -35,7 +35,7 @@ #include "xen-ops.h" #include "mmu.h" -static cpumask_t xen_cpu_initialized_map; +cpumask_t xen_cpu_initialized_map; static DEFINE_PER_CPU(int, resched_irq) = -1; static DEFINE_PER_CPU(int, callfunc_irq) = -1; static DEFINE_PER_CPU(int, debug_irq) = -1; diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c new file mode 100644 index 000000000000..7620a16fe535 --- /dev/null +++ b/arch/x86/xen/suspend.c @@ -0,0 +1,42 @@ +#include + +#include +#include +#include + +#include +#include + +#include "xen-ops.h" +#include "mmu.h" + +void xen_pre_suspend(void) +{ + xen_start_info->store_mfn = mfn_to_pfn(xen_start_info->store_mfn); + xen_start_info->console.domU.mfn = + mfn_to_pfn(xen_start_info->console.domU.mfn); + + BUG_ON(!irqs_disabled()); + + HYPERVISOR_shared_info = &xen_dummy_shared_info; + if (HYPERVISOR_update_va_mapping(fix_to_virt(FIX_PARAVIRT_BOOTMAP), + __pte_ma(0), 0)) + BUG(); +} + +void xen_post_suspend(int suspend_cancelled) +{ + if (suspend_cancelled) { + xen_start_info->store_mfn = + pfn_to_mfn(xen_start_info->store_mfn); + xen_start_info->console.domU.mfn = + pfn_to_mfn(xen_start_info->console.domU.mfn); + } else { +#ifdef CONFIG_SMP + xen_cpu_initialized_map = cpu_online_map; +#endif + } + + xen_setup_shared_info(); +} + diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index c39e1a5aa241..0bef256e5f2d 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -572,6 +572,14 @@ void xen_setup_cpu_clockevents(void) clockevents_register_device(&__get_cpu_var(xen_clock_events)); } +void xen_time_suspend(void) +{ +} + +void xen_time_resume(void) +{ +} + __init void xen_time_init(void) { int cpu = smp_processor_id(); diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index a1bc89a8f169..a0503acad664 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -9,6 +9,7 @@ extern const char xen_hypervisor_callback[]; extern const char xen_failsafe_callback[]; +struct trap_info; void xen_copy_trap_info(struct trap_info *traps); DECLARE_PER_CPU(unsigned long, xen_cr3); @@ -19,6 +20,7 @@ extern struct shared_info xen_dummy_shared_info; extern struct shared_info *HYPERVISOR_shared_info; void xen_setup_mfn_list_list(void); +void xen_setup_shared_info(void); char * __init xen_memory_setup(void); void __init xen_arch_setup(void); @@ -59,6 +61,8 @@ int xen_smp_call_function_single(int cpu, void (*func) (void *info), void *info, int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info, int wait); +extern cpumask_t xen_cpu_initialized_map; + /* Declare an asm function, along with symbols needed to make it inlineable */ diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 70375a690761..73d78dc9b875 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -674,6 +674,89 @@ static int retrigger_dynirq(unsigned int irq) return ret; } +static void restore_cpu_virqs(unsigned int cpu) +{ + struct evtchn_bind_virq bind_virq; + int virq, irq, evtchn; + + for (virq = 0; virq < NR_VIRQS; virq++) { + if ((irq = per_cpu(virq_to_irq, cpu)[virq]) == -1) + continue; + + BUG_ON(irq_info[irq].type != IRQT_VIRQ); + BUG_ON(irq_info[irq].index != virq); + + /* Get a new binding from Xen. */ + bind_virq.virq = virq; + bind_virq.vcpu = cpu; + if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_virq, + &bind_virq) != 0) + BUG(); + evtchn = bind_virq.port; + + /* Record the new mapping. */ + evtchn_to_irq[evtchn] = irq; + irq_info[irq] = mk_irq_info(IRQT_VIRQ, virq, evtchn); + bind_evtchn_to_cpu(evtchn, cpu); + + /* Ready for use. */ + unmask_evtchn(evtchn); + } +} + +static void restore_cpu_ipis(unsigned int cpu) +{ + struct evtchn_bind_ipi bind_ipi; + int ipi, irq, evtchn; + + for (ipi = 0; ipi < XEN_NR_IPIS; ipi++) { + if ((irq = per_cpu(ipi_to_irq, cpu)[ipi]) == -1) + continue; + + BUG_ON(irq_info[irq].type != IRQT_IPI); + BUG_ON(irq_info[irq].index != ipi); + + /* Get a new binding from Xen. */ + bind_ipi.vcpu = cpu; + if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_ipi, + &bind_ipi) != 0) + BUG(); + evtchn = bind_ipi.port; + + /* Record the new mapping. */ + evtchn_to_irq[evtchn] = irq; + irq_info[irq] = mk_irq_info(IRQT_IPI, ipi, evtchn); + bind_evtchn_to_cpu(evtchn, cpu); + + /* Ready for use. */ + unmask_evtchn(evtchn); + + } +} + +void xen_irq_resume(void) +{ + unsigned int cpu, irq, evtchn; + + init_evtchn_cpu_bindings(); + + /* New event-channel space is not 'live' yet. */ + for (evtchn = 0; evtchn < NR_EVENT_CHANNELS; evtchn++) + mask_evtchn(evtchn); + + /* No IRQ <-> event-channel mappings. */ + for (irq = 0; irq < NR_IRQS; irq++) + irq_info[irq].evtchn = 0; /* zap event-channel binding */ + + for (evtchn = 0; evtchn < NR_EVENT_CHANNELS; evtchn++) + evtchn_to_irq[evtchn] = -1; + + for_each_possible_cpu(cpu) { + restore_cpu_virqs(cpu); + restore_cpu_ipis(cpu); + } +} + static struct irq_chip xen_dynamic_chip __read_mostly = { .name = "xen-dyn", .mask = disable_dynirq, diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 52b6b41b909d..e9e11168616a 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -471,14 +471,14 @@ static int gnttab_map(unsigned int start_idx, unsigned int end_idx) return 0; } -static int gnttab_resume(void) +int gnttab_resume(void) { if (max_nr_grant_frames() < nr_grant_frames) return -ENOSYS; return gnttab_map(0, nr_grant_frames - 1); } -static int gnttab_suspend(void) +int gnttab_suspend(void) { arch_gnttab_unmap_shared(shared, nr_grant_frames); return 0; diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index aa7af9e6abc0..ba85fa2cff33 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -5,21 +5,113 @@ #include #include #include +#include +#include #include - -#define SHUTDOWN_INVALID -1 -#define SHUTDOWN_POWEROFF 0 -#define SHUTDOWN_SUSPEND 2 -/* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only - * report a crash, not be instructed to crash! - * HALT is the same as POWEROFF, as far as we're concerned. The tools use - * the distinction when we return the reason code to them. - */ -#define SHUTDOWN_HALT 4 +#include +#include +#include +#include + +#include +#include + +enum shutdown_state { + SHUTDOWN_INVALID = -1, + SHUTDOWN_POWEROFF = 0, + SHUTDOWN_SUSPEND = 2, + /* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only + report a crash, not be instructed to crash! + HALT is the same as POWEROFF, as far as we're concerned. The tools use + the distinction when we return the reason code to them. */ + SHUTDOWN_HALT = 4, +}; /* Ignore multiple shutdown requests. */ -static int shutting_down = SHUTDOWN_INVALID; +static enum shutdown_state shutting_down = SHUTDOWN_INVALID; + +static int xen_suspend(void *data) +{ + int *cancelled = data; + + BUG_ON(!irqs_disabled()); + + load_cr3(swapper_pg_dir); + + xen_mm_pin_all(); + gnttab_suspend(); + xen_time_suspend(); + xen_pre_suspend(); + + /* + * This hypercall returns 1 if suspend was cancelled + * or the domain was merely checkpointed, and 0 if it + * is resuming in a new domain. + */ + *cancelled = HYPERVISOR_suspend(virt_to_mfn(xen_start_info)); + + xen_post_suspend(*cancelled); + xen_time_resume(); + gnttab_resume(); + xen_mm_unpin_all(); + + if (!*cancelled) { + xen_irq_resume(); + xen_console_resume(); + } + + return 0; +} + +static void do_suspend(void) +{ + int err; + int cancelled = 1; + + shutting_down = SHUTDOWN_SUSPEND; + +#ifdef CONFIG_PREEMPT + /* If the kernel is preemptible, we need to freeze all the processes + to prevent them from being in the middle of a pagetable update + during suspend. */ + err = freeze_processes(); + if (err) { + printk(KERN_ERR "xen suspend: freeze failed %d\n", err); + return; + } +#endif + + err = device_suspend(PMSG_SUSPEND); + if (err) { + printk(KERN_ERR "xen suspend: device_suspend %d\n", err); + goto out; + } + + printk("suspending xenbus...\n"); + /* XXX use normal device tree? */ + xenbus_suspend(); + + err = stop_machine_run(xen_suspend, &cancelled, 0); + if (err) { + printk(KERN_ERR "failed to start xen_suspend: %d\n", err); + goto out; + } + + if (!cancelled) + xenbus_resume(); + else + xenbus_suspend_cancel(); + + device_resume(); + + +out: +#ifdef CONFIG_PREEMPT + thaw_processes(); +#endif + shutting_down = SHUTDOWN_INVALID; +} static void shutdown_handler(struct xenbus_watch *watch, const char **vec, unsigned int len) @@ -52,11 +144,17 @@ static void shutdown_handler(struct xenbus_watch *watch, } if (strcmp(str, "poweroff") == 0 || - strcmp(str, "halt") == 0) + strcmp(str, "halt") == 0) { + shutting_down = SHUTDOWN_POWEROFF; orderly_poweroff(false); - else if (strcmp(str, "reboot") == 0) + } else if (strcmp(str, "reboot") == 0) { + shutting_down = SHUTDOWN_POWEROFF; /* ? */ ctrl_alt_del(); - else { +#ifdef CONFIG_PM_SLEEP + } else if (strcmp(str, "suspend") == 0) { + do_suspend(); +#endif + } else { printk(KERN_INFO "Ignoring shutdown request: %s\n", str); shutting_down = SHUTDOWN_INVALID; } diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 590cff32415d..02955a1c3d76 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -157,6 +157,7 @@ PAGEFLAG(Active, active) __CLEARPAGEFLAG(Active, active) __PAGEFLAG(Slab, slab) PAGEFLAG(Checked, owner_priv_1) /* Used by some filesystems */ PAGEFLAG(Pinned, owner_priv_1) TESTSCFLAG(Pinned, owner_priv_1) /* Xen */ +PAGEFLAG(SavePinned, dirty); /* Xen */ PAGEFLAG(Reserved, reserved) __CLEARPAGEFLAG(Reserved, reserved) PAGEFLAG(Private, private) __CLEARPAGEFLAG(Private, private) __SETPAGEFLAG(Private, private) diff --git a/include/xen/events.h b/include/xen/events.h index a82ec0c45c38..67c4436554a9 100644 --- a/include/xen/events.h +++ b/include/xen/events.h @@ -41,4 +41,7 @@ static inline void notify_remote_via_evtchn(int port) } extern void notify_remote_via_irq(int irq); + +extern void xen_irq_resume(void); + #endif /* _XEN_EVENTS_H */ diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h index 466204846121..a40f1cd91be1 100644 --- a/include/xen/grant_table.h +++ b/include/xen/grant_table.h @@ -51,6 +51,9 @@ struct gnttab_free_callback { u16 count; }; +int gnttab_suspend(void); +int gnttab_resume(void); + int gnttab_grant_foreign_access(domid_t domid, unsigned long frame, int readonly); diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index 10ddfe0142d0..5d7a6db54a8c 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -5,4 +5,13 @@ DECLARE_PER_CPU(struct vcpu_info *, xen_vcpu); +void xen_pre_suspend(void); +void xen_post_suspend(int suspend_cancelled); + +void xen_mm_pin_all(void); +void xen_mm_unpin_all(void); + +void xen_time_suspend(void); +void xen_time_resume(void); + #endif /* INCLUDE_XEN_OPS_H */ -- cgit v1.2.3 From 359cdd3f866b6219a6729e313faf2221397f3278 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 26 May 2008 23:31:28 +0100 Subject: xen: maintain clock offset over save/restore Hook into the device model to make sure that timekeeping's resume handler is called. This deals with our clocksource's non-monotonicity over the save/restore. Explicitly call clock_has_changed() to make sure that all the timers get retriggered properly. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/xen/time.c | 8 -------- drivers/xen/manage.c | 15 ++++++++++++--- include/xen/xen-ops.h | 3 --- 3 files changed, 12 insertions(+), 14 deletions(-) diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 0bef256e5f2d..c39e1a5aa241 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -572,14 +572,6 @@ void xen_setup_cpu_clockevents(void) clockevents_register_device(&__get_cpu_var(xen_clock_events)); } -void xen_time_suspend(void) -{ -} - -void xen_time_resume(void) -{ -} - __init void xen_time_init(void) { int cpu = smp_processor_id(); diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index ba85fa2cff33..675c3dd23962 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -34,14 +34,21 @@ static enum shutdown_state shutting_down = SHUTDOWN_INVALID; static int xen_suspend(void *data) { int *cancelled = data; + int err; BUG_ON(!irqs_disabled()); load_cr3(swapper_pg_dir); + err = device_power_down(PMSG_SUSPEND); + if (err) { + printk(KERN_ERR "xen_suspend: device_power_down failed: %d\n", + err); + return err; + } + xen_mm_pin_all(); gnttab_suspend(); - xen_time_suspend(); xen_pre_suspend(); /* @@ -52,10 +59,11 @@ static int xen_suspend(void *data) *cancelled = HYPERVISOR_suspend(virt_to_mfn(xen_start_info)); xen_post_suspend(*cancelled); - xen_time_resume(); gnttab_resume(); xen_mm_unpin_all(); + device_power_up(); + if (!*cancelled) { xen_irq_resume(); xen_console_resume(); @@ -105,7 +113,8 @@ static void do_suspend(void) device_resume(); - + /* Make sure timer events get retriggered on all CPUs */ + clock_was_set(); out: #ifdef CONFIG_PREEMPT thaw_processes(); diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index 5d7a6db54a8c..a706d6a78960 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -11,7 +11,4 @@ void xen_post_suspend(int suspend_cancelled); void xen_mm_pin_all(void); void xen_mm_unpin_all(void); -void xen_time_suspend(void); -void xen_time_resume(void); - #endif /* INCLUDE_XEN_OPS_H */ -- cgit v1.2.3 From 3945e2c9abf8e00c2edc4aa29215ddfad1cd8cf7 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 25 May 2008 10:00:09 -0700 Subject: x86: extend e820 ealy_res support 32bit - fix #2 remove extra -1 in reseve_early calling panic if can not find space for new RAMDISK Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Jeremy Fitzhardinge Signed-off-by: Thomas Gleixner --- arch/x86/kernel/setup_32.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index c04e8c91daf7..08b47a2f7af0 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -479,7 +479,7 @@ static void __init reserve_initrd(void) initrd_start = 0; if (ramdisk_size >= end_of_lowmem/2) { - free_early(ramdisk_image, ramdisk_image + ramdisk_size - 1); + free_early(ramdisk_image, ramdisk_end); printk(KERN_ERR "initrd too large to handle, " "disabling initrd\n"); return; @@ -501,9 +501,13 @@ static void __init reserve_initrd(void) end_of_lowmem, ramdisk_size, PAGE_SIZE); + if (ramdisk_here == -1ULL) + panic("Cannot find place for new RAMDISK of size %lld\n", + ramdisk_size); + /* Note: this includes all the lowmem currently occupied by the initrd, we rely on that fact to keep the data intact. */ - reserve_early(ramdisk_here, ramdisk_here + ramdisk_size - 1, + reserve_early(ramdisk_here, ramdisk_here + ramdisk_size, "NEW RAMDISK"); initrd_start = ramdisk_here + PAGE_OFFSET; initrd_end = initrd_start + ramdisk_size; @@ -579,15 +583,15 @@ void __init setup_bootmem_allocator(void) PAGE_SIZE); if (bootmap == -1L) panic("Cannot find bootmem map of size %ld\n", bootmap_size); - reserve_early(bootmap, bootmap + bootmap_size - 1, "BOOTMAP"); + reserve_early(bootmap, bootmap + bootmap_size, "BOOTMAP"); #ifdef CONFIG_BLK_DEV_INITRD reserve_initrd(); #endif bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, max_low_pfn); printk(KERN_INFO " low ram: %08lx - %08lx\n", min_low_pfn< Date: Mon, 19 May 2008 16:21:33 +0200 Subject: [ALSA] usb-audio - Support for Roland SonicCell sound module Added entry into usbquirks.h to recognize Roland SonicCell sound module by mostly duplicating the entry for the Roland SH-201. USB MIDI works just fine, though the USB audio is a little unreliable (but still works well enough). Signed-off-by: Chris Mennie Signed-off-by: Takashi Iwai --- sound/usb/usbquirks.h | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index 82a8d14c26af..b7ab3ee7647e 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -1379,6 +1379,39 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, +{ + /* Roland SonicCell */ + USB_DEVICE(0x0582, 0x00c2), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "Roland", + .product_name = "SonicCell", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = 1, + .type = QUIRK_AUDIO_STANDARD_INTERFACE + }, + { + .ifnum = 2, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = & (const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0001, + .in_cables = 0x0001 + } + }, + { + .ifnum = -1 + } + } + } +}, + + /* Guillemot devices */ { /* -- cgit v1.2.3 From a72e72469a166c825196c3f20dabd352877fec2b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 20 May 2008 01:06:55 +0300 Subject: [ALSA] remove CVS keywords This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk Signed-off-by: Takashi Iwai --- include/sound/uda1341.h | 2 -- sound/arm/sa11xx-uda1341.c | 2 -- sound/i2c/l3/uda1341.c | 2 -- sound/pci/au88x0/au88x0_game.c | 2 -- 4 files changed, 8 deletions(-) diff --git a/include/sound/uda1341.h b/include/sound/uda1341.h index 2e564bfb37fe..110d5dc3a2be 100644 --- a/include/sound/uda1341.h +++ b/include/sound/uda1341.h @@ -15,8 +15,6 @@ * features support */ -/* $Id: uda1341.h,v 1.8 2005/11/17 14:17:21 tiwai Exp $ */ - #define UDA1341_ALSA_NAME "snd-uda1341" /* diff --git a/sound/arm/sa11xx-uda1341.c b/sound/arm/sa11xx-uda1341.c index 0eff33ca0f79..faeddf3ecedb 100644 --- a/sound/arm/sa11xx-uda1341.c +++ b/sound/arm/sa11xx-uda1341.c @@ -21,8 +21,6 @@ * merged HAL layer (patches from Brian) */ -/* $Id: sa11xx-uda1341.c,v 1.27 2005/12/07 09:13:42 cladisch Exp $ */ - /*************************************************************************************************** * * To understand what Alsa Drivers should be doing look at "Writing an Alsa Driver" by Takashi Iwai diff --git a/sound/i2c/l3/uda1341.c b/sound/i2c/l3/uda1341.c index bfa5d2c3608b..1f4942ea1414 100644 --- a/sound/i2c/l3/uda1341.c +++ b/sound/i2c/l3/uda1341.c @@ -17,8 +17,6 @@ * 2002-05-12 Tomas Kasparek another code cleanup */ -/* $Id: uda1341.c,v 1.18 2005/11/17 14:17:21 tiwai Exp $ */ - #include #include #include diff --git a/sound/pci/au88x0/au88x0_game.c b/sound/pci/au88x0/au88x0_game.c index bc212f41a38a..e291aa59742e 100644 --- a/sound/pci/au88x0/au88x0_game.c +++ b/sound/pci/au88x0/au88x0_game.c @@ -1,6 +1,4 @@ /* - * $Id: au88x0_game.c,v 1.9 2003/09/22 03:51:28 mjander Exp $ - * * Manuel Jander. * * Based on the work of: -- cgit v1.2.3 From 06b5fb97cec1a3ca61d10164118b00fe98a6a866 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 20 May 2008 00:59:35 +0300 Subject: sound: sound/oss/: remove CVS keywords This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk Signed-off-by: Takashi Iwai --- sound/oss/msnd.c | 2 -- sound/oss/msnd.h | 2 -- sound/oss/msnd_classic.h | 2 -- sound/oss/msnd_pinnacle.c | 5 ----- sound/oss/msnd_pinnacle.h | 2 -- 5 files changed, 13 deletions(-) diff --git a/sound/oss/msnd.c b/sound/oss/msnd.c index ba38d6200099..e4282d93a1aa 100644 --- a/sound/oss/msnd.c +++ b/sound/oss/msnd.c @@ -20,8 +20,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * $Id: msnd.c,v 1.17 1999/03/21 16:50:09 andrewtv Exp $ - * ********************************************************************/ #include diff --git a/sound/oss/msnd.h b/sound/oss/msnd.h index d0ca582c4583..61b3955481c5 100644 --- a/sound/oss/msnd.h +++ b/sound/oss/msnd.h @@ -24,8 +24,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * $Id: msnd.h,v 1.36 1999/03/21 17:05:42 andrewtv Exp $ - * ********************************************************************/ #ifndef __MSND_H #define __MSND_H diff --git a/sound/oss/msnd_classic.h b/sound/oss/msnd_classic.h index 7ffea5267f96..1a17dde2f650 100644 --- a/sound/oss/msnd_classic.h +++ b/sound/oss/msnd_classic.h @@ -24,8 +24,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * $Id: msnd_classic.h,v 1.10 1999/03/21 17:36:09 andrewtv Exp $ - * ********************************************************************/ #ifndef __MSND_CLASSIC_H #define __MSND_CLASSIC_H diff --git a/sound/oss/msnd_pinnacle.c b/sound/oss/msnd_pinnacle.c index f1f49ebf752e..bf27e008f465 100644 --- a/sound/oss/msnd_pinnacle.c +++ b/sound/oss/msnd_pinnacle.c @@ -29,13 +29,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * $Id: msnd_pinnacle.c,v 1.8 2000/12/30 00:33:21 sycamore Exp $ - * * 12-3-2000 Modified IO port validation Steve Sycamore * - * - * $$$: msnd_pinnacle.c,v 1.75 1999/03/21 16:50:09 andrewtv $$$ $ - * ********************************************************************/ #include diff --git a/sound/oss/msnd_pinnacle.h b/sound/oss/msnd_pinnacle.h index cce911487004..c18d66cbbe3f 100644 --- a/sound/oss/msnd_pinnacle.h +++ b/sound/oss/msnd_pinnacle.h @@ -24,8 +24,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * $Id: msnd_pinnacle.h,v 1.11 1999/03/21 17:36:09 andrewtv Exp $ - * ********************************************************************/ #ifndef __MSND_PINNACLE_H #define __MSND_PINNACLE_H -- cgit v1.2.3 From 89fe5117928b2c1272c9376362131ded561c91ad Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 23 May 2008 16:10:37 +0200 Subject: sound: Convert to menuconfig Convert menu in sound Kconfig files to menuconfig and if. Signed-off-by: Takashi Iwai --- sound/Kconfig | 34 ++++++++----------- sound/aoa/Kconfig | 11 +++---- sound/aoa/codecs/Kconfig | 4 --- sound/aoa/fabrics/Kconfig | 1 - sound/aoa/soundbus/Kconfig | 1 - sound/arm/Kconfig | 21 ++++++++---- sound/core/Kconfig | 19 ++--------- sound/drivers/Kconfig | 71 +++++++++++++++++++--------------------- sound/isa/Kconfig | 51 +++++++++++------------------ sound/mips/Kconfig | 14 +++++--- sound/parisc/Kconfig | 13 +++++--- sound/pci/Kconfig | 81 ++++++++-------------------------------------- sound/pcmcia/Kconfig | 15 ++++++--- sound/ppc/Kconfig | 26 +++++++-------- sound/sh/Kconfig | 16 ++++++--- sound/soc/Kconfig | 17 +++++----- sound/soc/at91/Kconfig | 2 +- sound/soc/codecs/Kconfig | 10 ++---- sound/soc/davinci/Kconfig | 2 +- sound/soc/fsl/Kconfig | 2 +- sound/soc/pxa/Kconfig | 2 +- sound/soc/s3c24xx/Kconfig | 4 +-- sound/soc/sh/Kconfig | 5 ++- sound/sparc/Kconfig | 17 ++++++---- sound/spi/Kconfig | 13 ++++++-- sound/usb/Kconfig | 16 +++++---- 26 files changed, 203 insertions(+), 265 deletions(-) diff --git a/sound/Kconfig b/sound/Kconfig index 4247406160e7..a37bee094eba 100644 --- a/sound/Kconfig +++ b/sound/Kconfig @@ -1,11 +1,9 @@ # sound/Config.in # -menu "Sound" - depends on HAS_IOMEM - -config SOUND +menuconfig SOUND tristate "Sound card support" + depends on HAS_IOMEM help If you have a sound card in your computer, i.e. if it can say more than an occasional beep, say Y. Be sure to have all the information @@ -28,22 +26,22 @@ config SOUND and read ; the module will be called soundcore. +if SOUND + source "sound/oss/dmasound/Kconfig" if !M68K -menu "Advanced Linux Sound Architecture" - depends on SOUND!=n - -config SND +menuconfig SND tristate "Advanced Linux Sound Architecture" - depends on SOUND help Say 'Y' or 'M' to enable ALSA (Advanced Linux Sound Architecture), the new base sound system. For more information, see +if SND + source "sound/core/Kconfig" source "sound/drivers/Kconfig" @@ -58,9 +56,7 @@ source "sound/aoa/Kconfig" source "sound/arm/Kconfig" -if SPI source "sound/spi/Kconfig" -endif source "sound/mips/Kconfig" @@ -80,22 +76,20 @@ source "sound/parisc/Kconfig" source "sound/soc/Kconfig" -endmenu +endif # SND -menu "Open Sound System" - depends on SOUND!=n - -config SOUND_PRIME +menuconfig SOUND_PRIME tristate "Open Sound System (DEPRECATED)" - depends on SOUND help Say 'Y' or 'M' to enable Open Sound System drivers. +if SOUND_PRIME + source "sound/oss/Kconfig" -endmenu +endif # SOUND_PRIME -endif +endif # !M68K config AC97_BUS tristate @@ -105,4 +99,4 @@ config AC97_BUS sound although they're sharing the AC97 bus. Concerned drivers should "select" this. -endmenu +endif # SOUND diff --git a/sound/aoa/Kconfig b/sound/aoa/Kconfig index 5d5813cec4c8..c081e18b9540 100644 --- a/sound/aoa/Kconfig +++ b/sound/aoa/Kconfig @@ -1,18 +1,17 @@ -menu "Apple Onboard Audio driver" - depends on SND!=n && PPC_PMAC - -config SND_AOA +menuconfig SND_AOA tristate "Apple Onboard Audio driver" - depends on SND + depends on PPC_PMAC select SND_PCM ---help--- This option enables the new driver for the various Apple Onboard Audio components. +if SND_AOA + source "sound/aoa/fabrics/Kconfig" source "sound/aoa/codecs/Kconfig" source "sound/aoa/soundbus/Kconfig" -endmenu +endif # SND_AOA diff --git a/sound/aoa/codecs/Kconfig b/sound/aoa/codecs/Kconfig index d5fbd6016e93..808eb11ebacd 100644 --- a/sound/aoa/codecs/Kconfig +++ b/sound/aoa/codecs/Kconfig @@ -1,6 +1,5 @@ config SND_AOA_ONYX tristate "support Onyx chip" - depends on SND_AOA select I2C select I2C_POWERMAC ---help--- @@ -10,7 +9,6 @@ config SND_AOA_ONYX #config SND_AOA_TOPAZ # tristate "support Topaz chips" -# depends on SND_AOA # ---help--- # This option enables support for the Topaz (CS84xx) # codec chips found in the latest Apple machines, @@ -19,7 +17,6 @@ config SND_AOA_ONYX config SND_AOA_TAS tristate "support TAS chips" - depends on SND_AOA select I2C select I2C_POWERMAC ---help--- @@ -29,7 +26,6 @@ config SND_AOA_TAS config SND_AOA_TOONIE tristate "support Toonie chip" - depends on SND_AOA ---help--- This option enables support for the toonie codec found in the Mac Mini. If you have a Mac Mini and diff --git a/sound/aoa/fabrics/Kconfig b/sound/aoa/fabrics/Kconfig index 50d7021ff677..3ca475a886b1 100644 --- a/sound/aoa/fabrics/Kconfig +++ b/sound/aoa/fabrics/Kconfig @@ -1,6 +1,5 @@ config SND_AOA_FABRIC_LAYOUT tristate "layout-id fabric" - depends on SND_AOA select SND_AOA_SOUNDBUS select SND_AOA_SOUNDBUS_I2S ---help--- diff --git a/sound/aoa/soundbus/Kconfig b/sound/aoa/soundbus/Kconfig index 7368b7ddfe0d..839d1137b9b2 100644 --- a/sound/aoa/soundbus/Kconfig +++ b/sound/aoa/soundbus/Kconfig @@ -1,6 +1,5 @@ config SND_AOA_SOUNDBUS tristate "Apple Soundbus support" - depends on SOUND select SND_PCM ---help--- This option enables the generic driver for the soundbus diff --git a/sound/arm/Kconfig b/sound/arm/Kconfig index 2e4a5e0d16db..351e19ea3785 100644 --- a/sound/arm/Kconfig +++ b/sound/arm/Kconfig @@ -1,11 +1,19 @@ # ALSA ARM drivers -menu "ALSA ARM devices" - depends on SND!=n && ARM +menuconfig SND_ARM + bool "ARM sound devices" + depends on ARM + default y + help + Support for sound devices specific to ARM architectures. + Drivers that are implemented on ASoC can be found in + "ALSA for SoC audio support" section. + +if SND_ARM config SND_SA11XX_UDA1341 tristate "SA11xx UDA1341TS driver (iPaq H3600)" - depends on ARCH_SA1100 && SND && L3 + depends on ARCH_SA1100 && L3 select SND_PCM help Say Y here if you have a Compaq iPaq H3x00 handheld computer @@ -16,7 +24,7 @@ config SND_SA11XX_UDA1341 config SND_ARMAACI tristate "ARM PrimeCell PL041 AC Link support" - depends on SND && ARM_AMBA + depends on ARM_AMBA select SND_PCM select SND_AC97_CODEC @@ -26,11 +34,12 @@ config SND_PXA2XX_PCM config SND_PXA2XX_AC97 tristate "AC97 driver for the Intel PXA2xx chip" - depends on ARCH_PXA && SND + depends on ARCH_PXA select SND_PXA2XX_PCM select SND_AC97_CODEC help Say Y or M if you want to support any AC97 codec attached to the PXA2xx AC97 interface. -endmenu +endif # SND_ARM + diff --git a/sound/core/Kconfig b/sound/core/Kconfig index a8d71c6c8e75..db2111375784 100644 --- a/sound/core/Kconfig +++ b/sound/core/Kconfig @@ -1,24 +1,19 @@ # ALSA soundcard-configuration config SND_TIMER tristate - depends on SND config SND_PCM tristate select SND_TIMER - depends on SND config SND_HWDEP tristate - depends on SND config SND_RAWMIDI tristate - depends on SND config SND_SEQUENCER tristate "Sequencer support" - depends on SND select SND_TIMER help Say Y or M to enable MIDI sequencer and router support. This @@ -44,11 +39,9 @@ config SND_SEQ_DUMMY config SND_OSSEMUL bool - depends on SND config SND_MIXER_OSS tristate "OSS Mixer API" - depends on SND select SND_OSSEMUL help To enable OSS mixer API emulation (/dev/mixer*), say Y here @@ -61,7 +54,6 @@ config SND_MIXER_OSS config SND_PCM_OSS tristate "OSS PCM (digital audio) API" - depends on SND select SND_OSSEMUL select SND_PCM help @@ -84,7 +76,7 @@ config SND_PCM_OSS_PLUGINS config SND_SEQUENCER_OSS bool "OSS Sequencer API" - depends on SND && SND_SEQUENCER + depends on SND_SEQUENCER select SND_OSSEMUL help Say Y here to enable OSS sequencer emulation (both @@ -98,7 +90,7 @@ config SND_SEQUENCER_OSS config SND_RTCTIMER tristate "RTC Timer support" - depends on SND && RTC + depends on RTC select SND_TIMER help Say Y here to enable RTC timer support for ALSA. ALSA uses @@ -123,7 +115,6 @@ config SND_SEQ_RTCTIMER_DEFAULT config SND_DYNAMIC_MINORS bool "Dynamic device file minor numbers" - depends on SND help If you say Y here, the minor numbers of ALSA device files in /dev/snd/ are allocated dynamically. This allows you to have @@ -134,7 +125,6 @@ config SND_DYNAMIC_MINORS config SND_SUPPORT_OLD_API bool "Support old ALSA API" - depends on SND default y help Say Y here to support the obsolete ALSA PCM API (ver.0.9.0 rc3 @@ -142,7 +132,7 @@ config SND_SUPPORT_OLD_API config SND_VERBOSE_PROCFS bool "Verbose procfs contents" - depends on SND && PROC_FS + depends on PROC_FS default y help Say Y here to include code for verbose procfs contents (provides @@ -151,7 +141,6 @@ config SND_VERBOSE_PROCFS config SND_VERBOSE_PRINTK bool "Verbose printk" - depends on SND help Say Y here to enable verbose log messages. These messages will help to identify source file and position containing @@ -161,7 +150,6 @@ config SND_VERBOSE_PRINTK config SND_DEBUG bool "Debug" - depends on SND help Say Y here to enable ALSA debug code. @@ -184,4 +172,3 @@ config SND_PCM_XRUN_DEBUG config SND_VMASTER bool - depends on SND diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig index 159137bf4c11..79b4d3f25665 100644 --- a/sound/drivers/Kconfig +++ b/sound/drivers/Kconfig @@ -1,15 +1,41 @@ -# ALSA generic drivers +config SND_MPU401_UART + tristate + select SND_RAWMIDI -menu "Generic devices" - depends on SND!=n +config SND_OPL3_LIB + tristate + select SND_TIMER + select SND_HWDEP +config SND_OPL4_LIB + tristate + select SND_TIMER + select SND_HWDEP + +config SND_VX_LIB + tristate + select SND_HWDEP + select SND_PCM + +config SND_AC97_CODEC + tristate + select SND_PCM + select AC97_BUS + select SND_VMASTER + +menuconfig SND_DRIVERS + bool "Generic sound devices" + default y + help + Support for generic sound devices. + +if SND_DRIVERS config SND_PCSP tristate "PC-Speaker support (READ HELP!)" depends on PCSPKR_PLATFORM && X86_PC && HIGH_RES_TIMERS depends on INPUT depends on EXPERIMENTAL - depends on SND select SND_PCM help If you don't have a sound card in your computer, you can include a @@ -35,34 +61,8 @@ config SND_PCSP Say M if you don't. Say Y only if you really know what you do. -config SND_MPU401_UART - tristate - select SND_RAWMIDI - -config SND_OPL3_LIB - tristate - select SND_TIMER - select SND_HWDEP - -config SND_OPL4_LIB - tristate - select SND_TIMER - select SND_HWDEP - -config SND_VX_LIB - tristate - select SND_HWDEP - select SND_PCM - -config SND_AC97_CODEC - tristate - select SND_PCM - select AC97_BUS - select SND_VMASTER - config SND_DUMMY tristate "Dummy (/dev/null) soundcard" - depends on SND select SND_PCM help Say Y here to include the dummy driver. This driver does @@ -91,7 +91,6 @@ config SND_VIRMIDI config SND_MTPAV tristate "MOTU MidiTimePiece AV multiport MIDI" - depends on SND select SND_RAWMIDI help To use a MOTU MidiTimePiece AV multiport MIDI adapter @@ -103,7 +102,7 @@ config SND_MTPAV config SND_MTS64 tristate "ESI Miditerminal 4140 driver" - depends on SND && PARPORT + depends on PARPORT select SND_RAWMIDI help The ESI Miditerminal 4140 is a 4 In 4 Out MIDI Interface with @@ -116,7 +115,6 @@ config SND_MTS64 config SND_SERIAL_U16550 tristate "UART16550 serial MIDI driver" - depends on SND select SND_RAWMIDI help To include support for MIDI serial port interfaces, say Y here @@ -132,7 +130,6 @@ config SND_SERIAL_U16550 config SND_MPU401 tristate "Generic MPU-401 UART driver" - depends on SND select SND_MPU401_UART help Say Y here to include support for MIDI ports compatible with @@ -143,7 +140,7 @@ config SND_MPU401 config SND_PORTMAN2X4 tristate "Portman 2x4 driver" - depends on SND && PARPORT + depends on PARPORT select SND_RAWMIDI help Say Y here to include support for Midiman Portman 2x4 parallel @@ -154,7 +151,7 @@ config SND_PORTMAN2X4 config SND_ML403_AC97CR tristate "Xilinx ML403 AC97 Controller Reference" - depends on SND && XILINX_VIRTEX + depends on XILINX_VIRTEX select SND_AC97_CODEC help Say Y here to include support for the @@ -164,4 +161,4 @@ config SND_ML403_AC97CR To compile this driver as a module, choose M here: the module will be called snd-ml403_ac97cr. -endmenu +endif # SND_DRIVERS diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index 2639a6ab8f2e..4575ba865910 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -21,12 +21,17 @@ config SND_SB16_DSP select SND_PCM select SND_SB_COMMON -menu "ISA devices" - depends on SND!=n && ISA && ISA_DMA_API +menuconfig SND_ISA + bool "ISA sound devices" + depends on ISA && ISA_DMA_API + default y + help + Support for sound devices connected via the ISA bus. + +if SND_ISA config SND_ADLIB tristate "AdLib FM card" - depends on SND select SND_OPL3_LIB help Say Y here to include support for AdLib FM cards. @@ -36,7 +41,7 @@ config SND_ADLIB config SND_AD1816A tristate "Analog Devices SoundPort AD1816A" - depends on SND && PNP && ISA + depends on PNP select ISAPNP select SND_OPL3_LIB select SND_MPU401_UART @@ -50,7 +55,6 @@ config SND_AD1816A config SND_AD1848 tristate "Generic AD1848/CS4248 driver" - depends on SND select SND_AD1848_LIB help Say Y here to include support for AD1848 (Analog Devices) or @@ -64,7 +68,7 @@ config SND_AD1848 config SND_ALS100 tristate "Avance Logic ALS100/ALS120" - depends on SND && PNP && ISA + depends on PNP select ISAPNP select SND_OPL3_LIB select SND_MPU401_UART @@ -78,7 +82,7 @@ config SND_ALS100 config SND_AZT2320 tristate "Aztech Systems AZT2320" - depends on SND && PNP && ISA + depends on PNP select ISAPNP select SND_OPL3_LIB select SND_MPU401_UART @@ -92,7 +96,6 @@ config SND_AZT2320 config SND_CMI8330 tristate "C-Media CMI8330" - depends on SND select SND_AD1848_LIB select SND_SB16_DSP help @@ -104,7 +107,6 @@ config SND_CMI8330 config SND_CS4231 tristate "Generic Cirrus Logic CS4231 driver" - depends on SND select SND_MPU401_UART select SND_CS4231_LIB help @@ -116,7 +118,6 @@ config SND_CS4231 config SND_CS4232 tristate "Generic Cirrus Logic CS4232 driver" - depends on SND select SND_OPL3_LIB select SND_MPU401_UART select SND_CS4231_LIB @@ -129,7 +130,6 @@ config SND_CS4232 config SND_CS4236 tristate "Generic Cirrus Logic CS4236+ driver" - depends on SND select SND_OPL3_LIB select SND_MPU401_UART select SND_CS4231_LIB @@ -142,7 +142,7 @@ config SND_CS4236 config SND_DT019X tristate "Diamond Technologies DT-019X, Avance Logic ALS-007" - depends on SND && PNP && ISA + depends on PNP select ISAPNP select SND_OPL3_LIB select SND_MPU401_UART @@ -156,7 +156,7 @@ config SND_DT019X config SND_ES968 tristate "Generic ESS ES968 driver" - depends on SND && PNP && ISA + depends on PNP select ISAPNP select SND_MPU401_UART select SND_SB8_DSP @@ -168,7 +168,6 @@ config SND_ES968 config SND_ES1688 tristate "Generic ESS ES688/ES1688 driver" - depends on SND select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM @@ -181,7 +180,6 @@ config SND_ES1688 config SND_ES18XX tristate "Generic ESS ES18xx driver" - depends on SND select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM @@ -193,7 +191,7 @@ config SND_ES18XX config SND_SC6000 tristate "Gallant SC-6000, Audio Excel DSP 16" - depends on SND && HAS_IOPORT + depends on HAS_IOPORT select SND_AD1848_LIB select SND_OPL3_LIB select SND_MPU401_UART @@ -209,7 +207,6 @@ config SND_GUS_SYNTH config SND_GUSCLASSIC tristate "Gravis UltraSound Classic" - depends on SND select SND_RAWMIDI select SND_PCM select SND_GUS_SYNTH @@ -222,7 +219,6 @@ config SND_GUSCLASSIC config SND_GUSEXTREME tristate "Gravis UltraSound Extreme" - depends on SND select SND_HWDEP select SND_MPU401_UART select SND_PCM @@ -236,7 +232,6 @@ config SND_GUSEXTREME config SND_GUSMAX tristate "Gravis UltraSound MAX" - depends on SND select SND_RAWMIDI select SND_CS4231_LIB select SND_GUS_SYNTH @@ -249,7 +244,7 @@ config SND_GUSMAX config SND_INTERWAVE tristate "AMD InterWave, Gravis UltraSound PnP" - depends on SND && PNP && ISA + depends on PNP select SND_RAWMIDI select SND_CS4231_LIB select SND_GUS_SYNTH @@ -263,7 +258,7 @@ config SND_INTERWAVE config SND_INTERWAVE_STB tristate "AMD InterWave + TEA6330T (UltraSound 32-Pro)" - depends on SND && PNP && ISA + depends on PNP select SND_RAWMIDI select SND_CS4231_LIB select SND_GUS_SYNTH @@ -277,7 +272,6 @@ config SND_INTERWAVE_STB config SND_OPL3SA2 tristate "Yamaha OPL3-SA2/SA3" - depends on SND select SND_OPL3_LIB select SND_MPU401_UART select SND_CS4231_LIB @@ -290,7 +284,6 @@ config SND_OPL3SA2 config SND_OPTI92X_AD1848 tristate "OPTi 82C92x - AD1848" - depends on SND select SND_OPL3_LIB select SND_OPL4_LIB select SND_MPU401_UART @@ -304,7 +297,6 @@ config SND_OPTI92X_AD1848 config SND_OPTI92X_CS4231 tristate "OPTi 82C92x - CS4231" - depends on SND select SND_OPL3_LIB select SND_OPL4_LIB select SND_MPU401_UART @@ -318,7 +310,6 @@ config SND_OPTI92X_CS4231 config SND_OPTI93X tristate "OPTi 82C93x" - depends on SND select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM @@ -331,7 +322,6 @@ config SND_OPTI93X config SND_MIRO tristate "Miro miroSOUND PCM1pro/PCM12/PCM20radio driver" - depends on SND select SND_OPL4_LIB select SND_CS4231_LIB select SND_MPU401_UART @@ -345,7 +335,6 @@ config SND_MIRO config SND_SB8 tristate "Sound Blaster 1.0/2.0/Pro (8-bit)" - depends on SND select SND_OPL3_LIB select SND_RAWMIDI select SND_SB8_DSP @@ -358,7 +347,6 @@ config SND_SB8 config SND_SB16 tristate "Sound Blaster 16 (PnP)" - depends on SND select SND_OPL3_LIB select SND_MPU401_UART select SND_SB16_DSP @@ -371,7 +359,6 @@ config SND_SB16 config SND_SBAWE tristate "Sound Blaster AWE (32,64) (PnP)" - depends on SND select SND_OPL3_LIB select SND_MPU401_UART select SND_SB16_DSP @@ -402,7 +389,6 @@ config SND_SB16_CSP_FIRMWARE_IN_KERNEL config SND_SGALAXY tristate "Aztech Sound Galaxy" - depends on SND select SND_AD1848_LIB help Say Y here to include support for Aztech Sound Galaxy @@ -413,7 +399,6 @@ config SND_SGALAXY config SND_SSCAPE tristate "Ensoniq SoundScape PnP driver" - depends on SND select SND_HWDEP select SND_MPU401_UART select SND_CS4231_LIB @@ -426,7 +411,6 @@ config SND_SSCAPE config SND_WAVEFRONT tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)" - depends on SND select FW_LOADER select SND_OPL3_LIB select SND_MPU401_UART @@ -448,4 +432,5 @@ config SND_WAVEFRONT_FIRMWARE_IN_KERNEL you need to install the firmware files from the alsa-firmware package. -endmenu +endif # SND_ISA + diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig index 531f8ba96a71..bb26f6cf4c0a 100644 --- a/sound/mips/Kconfig +++ b/sound/mips/Kconfig @@ -1,15 +1,21 @@ # ALSA MIPS drivers -menu "ALSA MIPS devices" - depends on SND!=n && MIPS +menuconfig SND_MIPS + bool "MIPS sound devices" + depends on MIPS + default y + help + Support for sound devices of MIPS architectures. + +if SND_MIPS config SND_AU1X00 tristate "Au1x00 AC97 Port Driver" - depends on (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && SND + depends on SOC_AU1000 || SOC_AU1100 || SOC_AU1500 select SND_PCM select SND_AC97_CODEC help ALSA Sound driver for the Au1x00's AC97 port. -endmenu +endif # SND_MIPS diff --git a/sound/parisc/Kconfig b/sound/parisc/Kconfig index a5a7f9d75d05..9b61d95010f0 100644 --- a/sound/parisc/Kconfig +++ b/sound/parisc/Kconfig @@ -1,15 +1,20 @@ # ALSA PA-RISC drivers -menu "GSC devices" - depends on SND!=n && GSC +menuconfig SND_GSC + bool "GSC sound devices" + depends on GSC + default y + help + Support for GSC sound devices on PA-RISC architectures. + +if SND_GSC config SND_HARMONY tristate "Harmony/Vivace sound chip" - depends on SND select SND_PCM help Say 'Y' or 'M' to include support for the Harmony/Vivace sound chip found in most GSC-based PA-RISC workstations. It's frequently provided as part of the Lasi multi-function IC. -endmenu +endif # SND_GSC diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index d95fbb2b5b9f..b148c0b3ef3f 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -1,11 +1,16 @@ # ALSA PCI drivers -menu "PCI devices" - depends on SND!=n && PCI +menuconfig SND_PCI + bool "PCI sound devices" + depends on PCI + default y + help + Support for sound devices connected via the PCI bus. + +if SND_PCI config SND_AD1889 tristate "Analog Devices AD1889" - depends on SND select SND_AC97_CODEC help Say Y here to include support for the integrated AC97 sound @@ -17,7 +22,6 @@ config SND_AD1889 config SND_ALS300 tristate "Avance Logic ALS300/ALS300+" - depends on SND select SND_PCM select SND_AC97_CODEC select SND_OPL3_LIB @@ -29,7 +33,7 @@ config SND_ALS300 config SND_ALS4000 tristate "Avance Logic ALS4000" - depends on SND && ISA_DMA_API + depends on ISA_DMA_API select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM @@ -43,7 +47,6 @@ config SND_ALS4000 config SND_ALI5451 tristate "ALi M5451 PCI Audio Controller" - depends on SND select SND_MPU401_UART select SND_AC97_CODEC help @@ -57,7 +60,6 @@ config SND_ALI5451 config SND_ATIIXP tristate "ATI IXP AC97 Controller" - depends on SND select SND_AC97_CODEC help Say Y here to include support for the integrated AC97 sound @@ -69,7 +71,6 @@ config SND_ATIIXP config SND_ATIIXP_MODEM tristate "ATI IXP Modem" - depends on SND select SND_AC97_CODEC help Say Y here to include support for the integrated MC97 modem on @@ -80,7 +81,6 @@ config SND_ATIIXP_MODEM config SND_AU8810 tristate "Aureal Advantage" - depends on SND select SND_MPU401_UART select SND_AC97_CODEC help @@ -95,7 +95,6 @@ config SND_AU8810 config SND_AU8820 tristate "Aureal Vortex" - depends on SND select SND_MPU401_UART select SND_AC97_CODEC help @@ -109,7 +108,6 @@ config SND_AU8820 config SND_AU8830 tristate "Aureal Vortex 2" - depends on SND select SND_MPU401_UART select SND_AC97_CODEC help @@ -124,7 +122,6 @@ config SND_AU8830 config SND_AW2 tristate "Emagic Audiowerk 2" - depends on SND help Say Y here to include support for Emagic Audiowerk 2 soundcards. @@ -139,7 +136,7 @@ config SND_AW2 config SND_AZT3328 tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)" - depends on SND && EXPERIMENTAL + depends on EXPERIMENTAL select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM @@ -152,7 +149,6 @@ config SND_AZT3328 config SND_BT87X tristate "Bt87x Audio Capture" - depends on SND select SND_PCM help If you want to record audio from TV cards based on @@ -174,7 +170,6 @@ config SND_BT87X_OVERCLOCK config SND_CA0106 tristate "SB Audigy LS / Live 24bit" - depends on SND select SND_AC97_CODEC select SND_RAWMIDI select SND_VMASTER @@ -187,7 +182,6 @@ config SND_CA0106 config SND_CMIPCI tristate "C-Media 8338, 8738, 8768, 8770" - depends on SND select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM @@ -201,13 +195,11 @@ config SND_CMIPCI config SND_OXYGEN_LIB tristate - depends on SND select SND_PCM select SND_MPU401_UART config SND_OXYGEN tristate "C-Media 8788 (Oxygen)" - depends on SND select SND_OXYGEN_LIB help Say Y here to include support for sound cards based on the @@ -225,7 +217,6 @@ config SND_OXYGEN config SND_CS4281 tristate "Cirrus Logic (Sound Fusion) CS4281" - depends on SND select SND_OPL3_LIB select SND_RAWMIDI select SND_AC97_CODEC @@ -237,7 +228,6 @@ config SND_CS4281 config SND_CS46XX tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x" - depends on SND select SND_RAWMIDI select SND_AC97_CODEC help @@ -258,7 +248,7 @@ config SND_CS46XX_NEW_DSP config SND_CS5530 tristate "CS5530 Audio" - depends on SND && ISA_DMA_API + depends on ISA_DMA_API select SND_SB16_DSP help Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips. @@ -268,7 +258,7 @@ config SND_CS5530 config SND_CS5535AUDIO tristate "CS5535/CS5536 Audio" - depends on SND && X86 && !X86_64 + depends on X86 && !X86_64 select SND_PCM select SND_AC97_CODEC help @@ -286,7 +276,6 @@ config SND_CS5535AUDIO config SND_DARLA20 tristate "(Echoaudio) Darla20" - depends on SND select FW_LOADER select SND_PCM help @@ -297,7 +286,6 @@ config SND_DARLA20 config SND_GINA20 tristate "(Echoaudio) Gina20" - depends on SND select FW_LOADER select SND_PCM help @@ -308,7 +296,6 @@ config SND_GINA20 config SND_LAYLA20 tristate "(Echoaudio) Layla20" - depends on SND select FW_LOADER select SND_RAWMIDI select SND_PCM @@ -320,7 +307,6 @@ config SND_LAYLA20 config SND_DARLA24 tristate "(Echoaudio) Darla24" - depends on SND select FW_LOADER select SND_PCM help @@ -331,7 +317,6 @@ config SND_DARLA24 config SND_GINA24 tristate "(Echoaudio) Gina24" - depends on SND select FW_LOADER select SND_PCM help @@ -342,7 +327,6 @@ config SND_GINA24 config SND_LAYLA24 tristate "(Echoaudio) Layla24" - depends on SND select FW_LOADER select SND_RAWMIDI select SND_PCM @@ -354,7 +338,6 @@ config SND_LAYLA24 config SND_MONA tristate "(Echoaudio) Mona" - depends on SND select FW_LOADER select SND_RAWMIDI select SND_PCM @@ -366,7 +349,6 @@ config SND_MONA config SND_MIA tristate "(Echoaudio) Mia" - depends on SND select FW_LOADER select SND_RAWMIDI select SND_PCM @@ -378,7 +360,6 @@ config SND_MIA config SND_ECHO3G tristate "(Echoaudio) 3G cards" - depends on SND select FW_LOADER select SND_RAWMIDI select SND_PCM @@ -390,7 +371,6 @@ config SND_ECHO3G config SND_INDIGO tristate "(Echoaudio) Indigo" - depends on SND select FW_LOADER select SND_PCM help @@ -401,7 +381,6 @@ config SND_INDIGO config SND_INDIGOIO tristate "(Echoaudio) Indigo IO" - depends on SND select FW_LOADER select SND_PCM help @@ -412,7 +391,6 @@ config SND_INDIGOIO config SND_INDIGODJ tristate "(Echoaudio) Indigo DJ" - depends on SND select FW_LOADER select SND_PCM help @@ -423,7 +401,6 @@ config SND_INDIGODJ config SND_EMU10K1 tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)" - depends on SND select FW_LOADER select SND_HWDEP select SND_RAWMIDI @@ -441,7 +418,6 @@ config SND_EMU10K1 config SND_EMU10K1X tristate "Emu10k1X (Dell OEM Version)" - depends on SND select SND_AC97_CODEC select SND_RAWMIDI help @@ -453,7 +429,6 @@ config SND_EMU10K1X config SND_ENS1370 tristate "(Creative) Ensoniq AudioPCI 1370" - depends on SND select SND_RAWMIDI select SND_PCM help @@ -464,7 +439,6 @@ config SND_ENS1370 config SND_ENS1371 tristate "(Creative) Ensoniq AudioPCI 1371/1373" - depends on SND select SND_RAWMIDI select SND_AC97_CODEC help @@ -476,7 +450,6 @@ config SND_ENS1371 config SND_ES1938 tristate "ESS ES1938/1946/1969 (Solo-1)" - depends on SND select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC @@ -489,7 +462,6 @@ config SND_ES1938 config SND_ES1968 tristate "ESS ES1968/1978 (Maestro-1/2/2E)" - depends on SND select SND_MPU401_UART select SND_AC97_CODEC help @@ -501,7 +473,6 @@ config SND_ES1968 config SND_FM801 tristate "ForteMedia FM801" - depends on SND select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC @@ -528,7 +499,6 @@ config SND_FM801_TEA575X config SND_HDA_INTEL tristate "Intel HD Audio" - depends on SND select SND_PCM select SND_VMASTER help @@ -637,7 +607,6 @@ config SND_HDA_POWER_SAVE_DEFAULT config SND_HDSP tristate "RME Hammerfall DSP Audio" - depends on SND select SND_HWDEP select SND_RAWMIDI select SND_PCM @@ -650,7 +619,6 @@ config SND_HDSP config SND_HDSPM tristate "RME Hammerfall DSP MADI" - depends on SND select SND_HWDEP select SND_RAWMIDI select SND_PCM @@ -663,7 +631,6 @@ config SND_HDSPM config SND_HIFIER tristate "TempoTec HiFier Fantasia" - depends on SND select SND_OXYGEN_LIB help Say Y here to include support for the MediaTek/TempoTec HiFier @@ -674,7 +641,6 @@ config SND_HIFIER config SND_ICE1712 tristate "ICEnsemble ICE1712 (Envy24)" - depends on SND select SND_MPU401_UART select SND_AC97_CODEC help @@ -691,7 +657,6 @@ config SND_ICE1712 config SND_ICE1724 tristate "ICE/VT1724/1720 (Envy24HT/PT)" - depends on SND select SND_RAWMIDI select SND_AC97_CODEC select SND_VMASTER @@ -709,7 +674,6 @@ config SND_ICE1724 config SND_INTEL8X0 tristate "Intel/SiS/nVidia/AMD/ALi AC97 Controller" - depends on SND select SND_AC97_CODEC help Say Y here to include support for the integrated AC97 sound @@ -722,7 +686,6 @@ config SND_INTEL8X0 config SND_INTEL8X0M tristate "Intel/SiS/nVidia/AMD MC97 Modem" - depends on SND select SND_AC97_CODEC help Say Y here to include support for the integrated MC97 modem on @@ -733,7 +696,6 @@ config SND_INTEL8X0M config SND_KORG1212 tristate "Korg 1212 IO" - depends on SND select FW_LOADER if !SND_KORG1212_FIRMWARE_IN_KERNEL select SND_PCM help @@ -753,7 +715,6 @@ config SND_KORG1212_FIRMWARE_IN_KERNEL config SND_MAESTRO3 tristate "ESS Allegro/Maestro3" - depends on SND select FW_LOADER if !SND_MAESTRO3_FIRMWARE_IN_KERNEL select SND_AC97_CODEC help @@ -774,7 +735,6 @@ config SND_MAESTRO3_FIRMWARE_IN_KERNEL config SND_MIXART tristate "Digigram miXart" - depends on SND select SND_HWDEP select SND_PCM help @@ -786,7 +746,6 @@ config SND_MIXART config SND_NM256 tristate "NeoMagic NM256AV/ZX" - depends on SND select SND_AC97_CODEC help Say Y here to include support for NeoMagic NM256AV/ZX chips. @@ -796,7 +755,6 @@ config SND_NM256 config SND_PCXHR tristate "Digigram PCXHR" - depends on SND select SND_PCM select SND_HWDEP help @@ -807,7 +765,6 @@ config SND_PCXHR config SND_RIPTIDE tristate "Conexant Riptide" - depends on SND select FW_LOADER select SND_OPL3_LIB select SND_MPU401_UART @@ -820,7 +777,6 @@ config SND_RIPTIDE config SND_RME32 tristate "RME Digi32, 32/8, 32 PRO" - depends on SND select SND_PCM help Say Y to include support for RME Digi32, Digi32 PRO and @@ -832,7 +788,6 @@ config SND_RME32 config SND_RME96 tristate "RME Digi96, 96/8, 96/8 PRO" - depends on SND select SND_PCM help Say Y here to include support for RME Digi96, Digi96/8 and @@ -843,7 +798,6 @@ config SND_RME96 config SND_RME9652 tristate "RME Digi9652 (Hammerfall)" - depends on SND select SND_PCM help Say Y here to include support for RME Hammerfall (RME @@ -854,7 +808,7 @@ config SND_RME9652 config SND_SIS7019 tristate "SiS 7019 Audio Accelerator" - depends on SND && X86 && !X86_64 + depends on X86 && !X86_64 select SND_AC97_CODEC help Say Y here to include support for the SiS 7019 Audio Accelerator. @@ -864,7 +818,6 @@ config SND_SIS7019 config SND_SONICVIBES tristate "S3 SonicVibes" - depends on SND select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC @@ -877,7 +830,6 @@ config SND_SONICVIBES config SND_TRIDENT tristate "Trident 4D-Wave DX/NX; SiS 7018" - depends on SND select SND_MPU401_UART select SND_AC97_CODEC help @@ -889,7 +841,6 @@ config SND_TRIDENT config SND_VIA82XX tristate "VIA 82C686A/B, 8233/8235 AC97 Controller" - depends on SND select SND_MPU401_UART select SND_AC97_CODEC help @@ -901,7 +852,6 @@ config SND_VIA82XX config SND_VIA82XX_MODEM tristate "VIA 82C686A/B, 8233 based Modems" - depends on SND select SND_AC97_CODEC help Say Y here to include support for the integrated MC97 modem on @@ -912,7 +862,6 @@ config SND_VIA82XX_MODEM config SND_VIRTUOSO tristate "Asus Virtuoso 100/200 (Xonar)" - depends on SND select SND_OXYGEN_LIB help Say Y here to include support for sound cards based on the @@ -923,7 +872,6 @@ config SND_VIRTUOSO config SND_VX222 tristate "Digigram VX222" - depends on SND select SND_VX_LIB help Say Y here to include support for Digigram VX222 soundcards. @@ -933,7 +881,6 @@ config SND_VX222 config SND_YMFPCI tristate "Yamaha YMF724/740/744/754" - depends on SND select FW_LOADER if !SND_YMFPCI_FIRMWARE_IN_KERNEL select SND_OPL3_LIB select SND_MPU401_UART @@ -975,4 +922,4 @@ config SND_AC97_POWER_SAVE_DEFAULT The default time-out value in seconds for AC97 automatic power-save mode. 0 means to disable the power-save mode. -endmenu +endif # SND_PCI diff --git a/sound/pcmcia/Kconfig b/sound/pcmcia/Kconfig index c9fa1a2bc58b..7fbb190adf6d 100644 --- a/sound/pcmcia/Kconfig +++ b/sound/pcmcia/Kconfig @@ -1,11 +1,16 @@ # ALSA PCMCIA drivers -menu "PCMCIA devices" - depends on SND!=n && PCMCIA +menuconfig SND_PCMCIA + bool "PCMCIA sound devices" + depends on PCMCIA + default y + help + Support for sound devices connected via the PCMCIA bus. + +if SND_PCMCIA && PCMCIA config SND_VXPOCKET tristate "Digigram VXpocket" - depends on SND && PCMCIA select SND_VX_LIB help Say Y here to include support for Digigram VXpocket and @@ -16,7 +21,6 @@ config SND_VXPOCKET config SND_PDAUDIOCF tristate "Sound Core PDAudioCF" - depends on SND && PCMCIA select SND_PCM help Say Y here to include support for Sound Core PDAudioCF @@ -25,4 +29,5 @@ config SND_PDAUDIOCF To compile this driver as a module, choose M here: the module will be called snd-pdaudiocf. -endmenu +endif # SND_PCMCIA + diff --git a/sound/ppc/Kconfig b/sound/ppc/Kconfig index cacb0b136883..777de2b17178 100644 --- a/sound/ppc/Kconfig +++ b/sound/ppc/Kconfig @@ -1,17 +1,17 @@ # ALSA PowerMac drivers -menu "ALSA PowerMac devices" - depends on SND!=n && PPC - -comment "ALSA PowerMac requires I2C" - depends on SND && I2C=n +menuconfig SND_PPC + bool "PowerPC sound devices" + depends on PPC64 || PPC32 + default y + help + Support for sound devices specific to PowerPC architectures. -comment "ALSA PowerMac requires INPUT" - depends on SND && INPUT=n +if SND_PPC config SND_POWERMAC tristate "PowerMac (AWACS, DACA, Burgundy, Tumbler, Keywest)" - depends on SND && I2C && INPUT && PPC_PMAC + depends on I2C && INPUT && PPC_PMAC select SND_PCM help Say Y here to include support for the integrated sound device. @@ -32,14 +32,9 @@ config SND_POWERMAC_AUTO_DRC Note that you can turn on/off DRC manually even without this option. -endmenu - -menu "ALSA PowerPC devices" - depends on SND!=n && ( PPC64 || PPC32 ) - config SND_PS3 tristate "PS3 Audio support" - depends on SND && PS3_PS3AV + depends on PS3_PS3AV select SND_PCM default m help @@ -52,4 +47,5 @@ config SND_PS3_DEFAULT_START_DELAY int "Startup delay time in ms" depends on SND_PS3 default "2000" -endmenu + +endif # SND_PPC diff --git a/sound/sh/Kconfig b/sound/sh/Kconfig index b7e08ef22a94..cfc143985802 100644 --- a/sound/sh/Kconfig +++ b/sound/sh/Kconfig @@ -1,14 +1,22 @@ # ALSA SH drivers -menu "SUPERH devices" - depends on SND!=n && SUPERH +menuconfig SND_SUPERH + bool "SUPERH sound devices" + depends on SUPERH + default y + help + Support for sound devices specific to SUPERH architectures. + Drivers that are implemented on ASoC can be found in + "ALSA for SoC audio support" section. + +if SND_SUPERH config SND_AICA tristate "Dreamcast Yamaha AICA sound" - depends on SH_DREAMCAST && SND + depends on SH_DREAMCAST select SND_PCM help ALSA Sound driver for the SEGA Dreamcast console. -endmenu +endif # SND_SUPERH diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index 18f28ac4bfe8..fd7bc4f89072 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -2,15 +2,8 @@ # SoC audio configuration # -menu "System on Chip audio support" - depends on SND!=n - -config SND_SOC_AC97_BUS - bool - -config SND_SOC +menuconfig SND_SOC tristate "ALSA for SoC audio support" - depends on SND select SND_PCM ---help--- @@ -23,6 +16,11 @@ config SND_SOC This ASoC audio support can also be built as a module. If so, the module will be called snd-soc-core. +if SND_SOC + +config SND_SOC_AC97_BUS + bool + # All the supported Soc's source "sound/soc/at91/Kconfig" source "sound/soc/pxa/Kconfig" @@ -35,4 +33,5 @@ source "sound/soc/omap/Kconfig" # Supported codecs source "sound/soc/codecs/Kconfig" -endmenu +endif # SND_SOC + diff --git a/sound/soc/at91/Kconfig b/sound/soc/at91/Kconfig index 5cb93fd3a407..905186502e00 100644 --- a/sound/soc/at91/Kconfig +++ b/sound/soc/at91/Kconfig @@ -1,6 +1,6 @@ config SND_AT91_SOC tristate "SoC Audio for the Atmel AT91 System-on-Chip" - depends on ARCH_AT91 && SND_SOC + depends on ARCH_AT91 help Say Y or M if you want to add support for codecs attached to the AT91 SSC interface. You will also need diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 3903ab7dfa4a..d4a5fe42f6e0 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1,31 +1,25 @@ config SND_SOC_AC97_CODEC tristate - depends on SND_SOC + select SND_AC97_CODEC config SND_SOC_WM8731 tristate - depends on SND_SOC config SND_SOC_WM8750 tristate - depends on SND_SOC config SND_SOC_WM8753 tristate - depends on SND_SOC config SND_SOC_WM9712 tristate - depends on SND_SOC config SND_SOC_WM9713 tristate - depends on SND_SOC # Cirrus Logic CS4270 Codec config SND_SOC_CS4270 tristate - depends on SND_SOC # Cirrus Logic CS4270 Codec Hardware Mute Support # Select if you have external muting circuitry attached to your CS4270. @@ -43,4 +37,4 @@ config SND_SOC_CS4270_VD33_ERRATA config SND_SOC_TLV320AIC3X tristate - depends on SND_SOC && I2C + depends on I2C diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig index 20680c551aab..8f7e33834902 100644 --- a/sound/soc/davinci/Kconfig +++ b/sound/soc/davinci/Kconfig @@ -1,6 +1,6 @@ config SND_DAVINCI_SOC tristate "SoC Audio for the TI DAVINCI chip" - depends on ARCH_DAVINCI && SND_SOC + depends on ARCH_DAVINCI help Say Y or M if you want to add support for codecs attached to the DAVINCI AC97 or I2S interface. You will also need diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 257101f44e9e..19802e27df4b 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -2,7 +2,7 @@ menu "ALSA SoC audio for Freescale SOCs" config SND_SOC_MPC8610 bool "ALSA SoC support for the MPC8610 SOC" - depends on SND_SOC && MPC8610_HPCD + depends on MPC8610_HPCD default y if MPC8610 help Say Y if you want to add support for codecs attached to the SSI diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 484f883459e0..18a40dc8ad9d 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -1,6 +1,6 @@ config SND_PXA2XX_SOC tristate "SoC Audio for the Intel PXA2xx chip" - depends on ARCH_PXA && SND_SOC + depends on ARCH_PXA help Say Y or M if you want to add support for codecs attached to the PXA2xx AC97, I2S or SSP interface. You will also need diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index 1f6dbfc4caa8..b9f2353effeb 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -1,7 +1,6 @@ config SND_S3C24XX_SOC tristate "SoC Audio for the Samsung S3C24XX chips" - depends on ARCH_S3C2410 && SND_SOC - select SND_PCM + depends on ARCH_S3C2410 help Say Y or M if you want to add support for codecs attached to the S3C24XX AC97, I2S or SSP interface. You will also need @@ -16,7 +15,6 @@ config SND_S3C2412_SOC_I2S config SND_S3C2443_SOC_AC97 tristate select AC97_BUS - select SND_AC97_CODEC select SND_SOC_AC97_BUS config SND_S3C24XX_SOC_NEO1973_WM8753 diff --git a/sound/soc/sh/Kconfig b/sound/soc/sh/Kconfig index 4c1e013381c9..54bd604012af 100644 --- a/sound/soc/sh/Kconfig +++ b/sound/soc/sh/Kconfig @@ -3,7 +3,7 @@ menu "SoC Audio support for SuperH" config SND_SOC_PCM_SH7760 tristate "SoC Audio support for Renesas SH7760" - depends on CPU_SUBTYPE_SH7760 && SND_SOC && SH_DMABRG + depends on CPU_SUBTYPE_SH7760 && SH_DMABRG help Enable this option for SH7760 AC97/I2S audio support. @@ -13,10 +13,9 @@ config SND_SOC_PCM_SH7760 ## config SND_SOC_SH4_HAC + tristate select AC97_BUS select SND_SOC_AC97_BUS - select SND_AC97_CODEC - tristate config SND_SOC_SH4_SSI tristate diff --git a/sound/sparc/Kconfig b/sound/sparc/Kconfig index 079e22af074c..d75deba5617d 100644 --- a/sound/sparc/Kconfig +++ b/sound/sparc/Kconfig @@ -1,11 +1,17 @@ # ALSA Sparc drivers -menu "ALSA Sparc devices" - depends on SND!=n && SPARC +menuconfig SND_SPARC + bool "Sparc sound devices" + depends on SPARC + default y + help + Support for sound devices specific to Sun SPARC architectures. + +if SND_SPARC config SND_SUN_AMD7930 tristate "Sun AMD7930" - depends on SBUS && SND + depends on SBUS select SND_PCM help Say Y here to include support for AMD7930 sound device on Sun. @@ -15,7 +21,6 @@ config SND_SUN_AMD7930 config SND_SUN_CS4231 tristate "Sun CS4231" - depends on SND select SND_PCM help Say Y here to include support for CS4231 sound device on Sun. @@ -25,7 +30,7 @@ config SND_SUN_CS4231 config SND_SUN_DBRI tristate "Sun DBRI" - depends on SND && SBUS + depends on SBUS select SND_PCM help Say Y here to include support for DBRI sound device on Sun. @@ -33,4 +38,4 @@ config SND_SUN_DBRI To compile this driver as a module, choose M here: the module will be called snd-sun-dbri. -endmenu +endif # SND_SPARC diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig index 0d08c29213c8..e6485be2e6f7 100644 --- a/sound/spi/Kconfig +++ b/sound/spi/Kconfig @@ -1,7 +1,13 @@ #SPI drivers -menu "SPI devices" - depends on SND != n +menuconfig SND_SPI + bool "SPI sound devices" + depends on SPI + default y + help + Support for sound devices connected via the SPI bus. + +if SND_SPI config SND_AT73C213 tristate "Atmel AT73C213 DAC driver" @@ -28,4 +34,5 @@ config SND_AT73C213_TARGET_BITRATE Set to 48000 Hz by default. -endmenu +endif # SND_SPI + diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig index 9351b8a765b9..ffcdc8f4ef66 100644 --- a/sound/usb/Kconfig +++ b/sound/usb/Kconfig @@ -1,11 +1,16 @@ # ALSA USB drivers -menu "USB devices" - depends on SND!=n && USB!=n +menuconfig SND_USB + bool "USB sound devices" + depends on USB + default y + help + Support for sound devices connected via the USB bus. + +if SND_USB && USB config SND_USB_AUDIO tristate "USB Audio/MIDI driver" - depends on SND && USB select SND_HWDEP select SND_RAWMIDI select SND_PCM @@ -18,7 +23,7 @@ config SND_USB_AUDIO config SND_USB_USX2Y tristate "Tascam US-122, US-224 and US-428 USB driver" - depends on SND && USB && (X86 || PPC || ALPHA) + depends on X86 || PPC || ALPHA select SND_HWDEP select SND_RAWMIDI select SND_PCM @@ -31,7 +36,6 @@ config SND_USB_USX2Y config SND_USB_CAIAQ tristate "Native Instruments USB audio devices" - depends on SND && USB select SND_HWDEP select SND_RAWMIDI select SND_PCM @@ -63,5 +67,5 @@ config SND_USB_CAIAQ_INPUT * Native Instruments Kore Controller 2 * Native Instruments Audio Kontrol 1 -endmenu +endif # SND_USB -- cgit v1.2.3 From 6938d6b2a90d5e2ffaef037852652a1333502519 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 23 May 2008 16:11:26 +0200 Subject: [ALSA] Fix AC97 kconfig items The kconfig items related with AC97-powersave must be outside the CONFIG_SND_PCI range. And it'd be better together with CONFIG_SND_AC97. Signed-off-by: Takashi Iwai --- sound/drivers/Kconfig | 21 +++++++++++++++++++++ sound/pci/Kconfig | 21 --------------------- 2 files changed, 21 insertions(+), 21 deletions(-) diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig index 79b4d3f25665..255fd18b9aec 100644 --- a/sound/drivers/Kconfig +++ b/sound/drivers/Kconfig @@ -161,4 +161,25 @@ config SND_ML403_AC97CR To compile this driver as a module, choose M here: the module will be called snd-ml403_ac97cr. +config SND_AC97_POWER_SAVE + bool "AC97 Power-Saving Mode" + depends on SND_AC97_CODEC && EXPERIMENTAL + default n + help + Say Y here to enable the aggressive power-saving support of + AC97 codecs. In this mode, the power-mode is dynamically + controlled at each open/close. + + The mode is activated by passing power_save=1 option to + snd-ac97-codec driver. You can toggle it dynamically over + sysfs, too. + +config SND_AC97_POWER_SAVE_DEFAULT + int "Default time-out for AC97 power-save mode" + depends on SND_AC97_POWER_SAVE + default 0 + help + The default time-out value in seconds for AC97 automatic + power-save mode. 0 means to disable the power-save mode. + endif # SND_DRIVERS diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index b148c0b3ef3f..8fe5dac39428 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -901,25 +901,4 @@ config SND_YMFPCI_FIRMWARE_IN_KERNEL for the YMFPCI driver. If you choose N here, you need to install the firmware files from the alsa-firmware package. -config SND_AC97_POWER_SAVE - bool "AC97 Power-Saving Mode" - depends on SND_AC97_CODEC && EXPERIMENTAL - default n - help - Say Y here to enable the aggressive power-saving support of - AC97 codecs. In this mode, the power-mode is dynamically - controlled at each open/close. - - The mode is activated by passing power_save=1 option to - snd-ac97-codec driver. You can toggle it dynamically over - sysfs, too. - -config SND_AC97_POWER_SAVE_DEFAULT - int "Default time-out for AC97 power-save mode" - depends on SND_AC97_POWER_SAVE - default 0 - help - The default time-out value in seconds for AC97 automatic - power-save mode. 0 means to disable the power-save mode. - endif # SND_PCI -- cgit v1.2.3 From 62cf872a8eec1f11aacbec0ac3fe3698bfa9b403 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 20 May 2008 12:15:15 +0200 Subject: [ALSA] Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE to represent its meaning more better. This config isn't provided only for the detection but for more verbose debug prints in general. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 2 +- .../sound/alsa/DocBook/writing-an-alsa-driver.tmpl | 4 ++-- include/sound/core.h | 8 ++++---- sound/core/Kconfig | 10 ++++++---- sound/pci/hda/hda_codec.c | 2 +- sound/pci/hda/hda_hwdep.c | 2 +- sound/pci/pcxhr/pcxhr.c | 4 ++-- sound/pci/pcxhr/pcxhr_core.c | 18 +++++++++--------- 8 files changed, 26 insertions(+), 24 deletions(-) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 0bbee38acd26..e59569462cb9 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1091,7 +1091,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This occurs when the access to non-existing or non-working codec slot (likely a modem one) causes a stall of the communication via HD-audio bus. You can see which codec slots are probed by enabling - CONFIG_SND_DEBUG_DETECT, or simply from the file name of the codec + CONFIG_SND_DEBUG_VERBOSE, or simply from the file name of the codec proc files. Then limit the slots to probe by probe_mask option. For example, probe_mask=1 means to probe only the first slot, and probe_mask=4 means only the third slot. diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl index b03df4d4795c..e13c4e67029f 100644 --- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl +++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl @@ -6127,8 +6127,8 @@ struct _snd_pcm_runtime { snd_printdd() is compiled in only when - CONFIG_SND_DEBUG_DETECT is set. Please note - that DEBUG_DETECT is not set as default + CONFIG_SND_DEBUG_VERBOSE is set. Please note + that CONFIG_SND_DEBUG_VERBOSE is not set as default even if you configure the alsa-driver with option. You need to give explicitly option instead. diff --git a/include/sound/core.h b/include/sound/core.h index 695ee53488a3..558b96284bd2 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -412,13 +412,13 @@ void snd_verbose_printd(const char *file, int line, const char *format, ...) #endif /* CONFIG_SND_DEBUG */ -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE /** * snd_printdd - debug printk * @format: format string * * Works like snd_printk() for debugging purposes. - * Ignored when CONFIG_SND_DEBUG_DETECT is not set. + * Ignored when CONFIG_SND_DEBUG_VERBOSE is not set. */ #define snd_printdd(format, args...) snd_printk(format, ##args) #else @@ -442,7 +442,7 @@ struct snd_pci_quirk { unsigned short subvendor; /* PCI subvendor ID */ unsigned short subdevice; /* PCI subdevice ID */ int value; /* value */ -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE const char *name; /* name of the device (optional) */ #endif }; @@ -450,7 +450,7 @@ struct snd_pci_quirk { #define _SND_PCI_QUIRK_ID(vend,dev) \ .subvendor = (vend), .subdevice = (dev) #define SND_PCI_QUIRK_ID(vend,dev) {_SND_PCI_QUIRK_ID(vend, dev)} -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE #define SND_PCI_QUIRK(vend,dev,xname,val) \ {_SND_PCI_QUIRK_ID(vend, dev), .value = (val), .name = (xname)} #else diff --git a/sound/core/Kconfig b/sound/core/Kconfig index db2111375784..335d45ecde6a 100644 --- a/sound/core/Kconfig +++ b/sound/core/Kconfig @@ -153,12 +153,14 @@ config SND_DEBUG help Say Y here to enable ALSA debug code. -config SND_DEBUG_DETECT - bool "Debug detection" +config SND_DEBUG_VERBOSE + bool "More verbose debug" depends on SND_DEBUG help - Say Y here to enable extra-verbose log messages printed when - detecting devices. + Say Y here to enable extra-verbose debugging messages. + + Let me repeat: it enables EXTRA-VERBOSE DEBUGGING messages. + So, say Y only if you are ready to be annoyed. config SND_PCM_XRUN_DEBUG bool "Enable PCM ring buffer overrun/underrun debugging" diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index a6be6e3e8716..d2e1093f8e97 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2335,7 +2335,7 @@ int snd_hda_check_board_config(struct hda_codec *codec, if (!tbl) return -1; if (tbl->value >= 0 && tbl->value < num_configs) { -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE char tmp[10]; const char *model = NULL; if (models) diff --git a/sound/pci/hda/hda_hwdep.c b/sound/pci/hda/hda_hwdep.c index 2177d9af5334..6e18a422d993 100644 --- a/sound/pci/hda/hda_hwdep.c +++ b/sound/pci/hda/hda_hwdep.c @@ -88,7 +88,7 @@ static int hda_hwdep_ioctl_compat(struct snd_hwdep *hw, struct file *file, static int hda_hwdep_open(struct snd_hwdep *hw, struct file *file) { -#ifndef CONFIG_SND_DEBUG_DETECT +#ifndef CONFIG_SND_DEBUG_VERBOSE if (!capable(CAP_SYS_RAWIO)) return -EACCES; #endif diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c index 7fdcdc8c6b64..2c7e25336795 100644 --- a/sound/pci/pcxhr/pcxhr.c +++ b/sound/pci/pcxhr/pcxhr.c @@ -516,7 +516,7 @@ static void pcxhr_trigger_tasklet(unsigned long arg) int capture_mask = 0; int playback_mask = 0; -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE struct timeval my_tv1, my_tv2; do_gettimeofday(&my_tv1); #endif @@ -623,7 +623,7 @@ static void pcxhr_trigger_tasklet(unsigned long arg) mutex_unlock(&mgr->setup_mutex); -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE do_gettimeofday(&my_tv2); snd_printdd("***TRIGGER TASKLET*** TIME = %ld (err = %x)\n", (long)(my_tv2.tv_usec - my_tv1.tv_usec), err); diff --git a/sound/pci/pcxhr/pcxhr_core.c b/sound/pci/pcxhr/pcxhr_core.c index 78aa81feaa4a..abe5c59b72df 100644 --- a/sound/pci/pcxhr/pcxhr_core.c +++ b/sound/pci/pcxhr/pcxhr_core.c @@ -473,7 +473,7 @@ static struct pcxhr_cmd_info pcxhr_dsp_cmds[] = { [CMD_AUDIO_LEVEL_ADJUST] = { 0xc22000, 0, RMH_SSIZE_FIXED }, }; -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE static char* cmd_names[] = { [CMD_VERSION] = "CMD_VERSION", [CMD_SUPPORTED] = "CMD_SUPPORTED", @@ -549,7 +549,7 @@ static int pcxhr_read_rmh_status(struct pcxhr_mgr *mgr, struct pcxhr_rmh *rmh) } } } -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE if (rmh->cmd_idx < CMD_LAST_INDEX) snd_printdd(" stat[%d]=%x\n", i, data); #endif @@ -597,7 +597,7 @@ static int pcxhr_send_msg_nolock(struct pcxhr_mgr *mgr, struct pcxhr_rmh *rmh) data |= 0x008000; /* MASK_MORE_THAN_1_WORD_COMMAND */ else data &= 0xff7fff; /* MASK_1_WORD_COMMAND */ -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE if (rmh->cmd_idx < CMD_LAST_INDEX) snd_printdd("MSG cmd[0]=%x (%s)\n", data, cmd_names[rmh->cmd_idx]); #endif @@ -624,7 +624,7 @@ static int pcxhr_send_msg_nolock(struct pcxhr_mgr *mgr, struct pcxhr_rmh *rmh) for (i=1; i < rmh->cmd_len; i++) { /* send other words */ data = rmh->cmd[i]; -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE if (rmh->cmd_idx < CMD_LAST_INDEX) snd_printdd(" cmd[%d]=%x\n", i, data); #endif @@ -847,7 +847,7 @@ int pcxhr_set_pipe_state(struct pcxhr_mgr *mgr, int playback_mask, int capture_m int state, i, err; int audio_mask; -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE struct timeval my_tv1, my_tv2; do_gettimeofday(&my_tv1); #endif @@ -894,7 +894,7 @@ int pcxhr_set_pipe_state(struct pcxhr_mgr *mgr, int playback_mask, int capture_m if (err) return err; } -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE do_gettimeofday(&my_tv2); snd_printdd("***SET PIPE STATE*** TIME = %ld (err = %x)\n", (long)(my_tv2.tv_usec - my_tv1.tv_usec), err); @@ -951,7 +951,7 @@ static int pcxhr_handle_async_err(struct pcxhr_mgr *mgr, u32 err, enum pcxhr_async_err_src err_src, int pipe, int is_capture) { -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE static char* err_src_name[] = { [PCXHR_ERR_PIPE] = "Pipe", [PCXHR_ERR_STREAM] = "Stream", @@ -1169,7 +1169,7 @@ irqreturn_t pcxhr_interrupt(int irq, void *dev_id) mgr->dsp_time_last, dsp_time_new); mgr->dsp_time_err++; } -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE if (dsp_time_diff == 0) snd_printdd("ERROR DSP TIME NO DIFF time(%d)\n", dsp_time_new); else if (dsp_time_diff >= (2*PCXHR_GRANULARITY)) @@ -1208,7 +1208,7 @@ irqreturn_t pcxhr_interrupt(int irq, void *dev_id) mgr->src_it_dsp = reg; tasklet_hi_schedule(&mgr->msg_taskq); } -#ifdef CONFIG_SND_DEBUG_DETECT +#ifdef CONFIG_SND_DEBUG_VERBOSE if (reg & PCXHR_FATAL_DSP_ERR) snd_printdd("FATAL DSP ERROR : %x\n", reg); #endif -- cgit v1.2.3 From 142054a389ebf7972b4eee822ad7c55ff852b649 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 26 May 2008 12:59:16 +0300 Subject: [ALSA] Add EM-X270 ASoC driver This patch adds ASoC support for EM-X270 machine. Signed-off-by: Mike Rapoport Signed-off-by: Takashi Iwai --- sound/soc/pxa/Kconfig | 9 +++++ sound/soc/pxa/Makefile | 3 +- sound/soc/pxa/em-x270.c | 102 ++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 113 insertions(+), 1 deletion(-) create mode 100644 sound/soc/pxa/em-x270.c diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 18a40dc8ad9d..12f6ac99b04c 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -62,3 +62,12 @@ config SND_PXA2XX_SOC_E800 help Say Y if you want to add support for SoC audio on the Toshiba e800 PDA + +config SND_PXA2XX_SOC_EM_X270 + tristate "SoC Audio support for CompuLab EM-x270" + depends on SND_PXA2XX_SOC && MACH_EM_X270 + select SND_PXA2XX_SOC_AC97 + select SND_SOC_WM9712 + help + Say Y if you want to add support for SoC audio on + CompuLab EM-x270. diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index 04e5646f75ba..5bc8edf9dca9 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -13,10 +13,11 @@ snd-soc-poodle-objs := poodle.o snd-soc-tosa-objs := tosa.o snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o +snd-soc-em-x270-objs := em-x270.o obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o obj-$(CONFIG_SND_PXA2XX_SOC_TOSA) += snd-soc-tosa.o obj-$(CONFIG_SND_PXA2XX_SOC_E800) += snd-soc-e800.o obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o - +obj-$(CONFIG_SND_PXA2XX_SOC_EM_X270) += snd-soc-em-x270.o diff --git a/sound/soc/pxa/em-x270.c b/sound/soc/pxa/em-x270.c new file mode 100644 index 000000000000..02dcac39cdf6 --- /dev/null +++ b/sound/soc/pxa/em-x270.c @@ -0,0 +1,102 @@ +/* + * em-x270.c -- SoC audio for EM-X270 + * + * Copyright 2007 CompuLab, Ltd. + * + * Author: Mike Rapoport + * + * Copied from tosa.c: + * Copyright 2005 Wolfson Microelectronics PLC. + * Copyright 2005 Openedhand Ltd. + * + * Authors: Liam Girdwood + * Richard Purdie + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "../codecs/wm9712.h" +#include "pxa2xx-pcm.h" +#include "pxa2xx-ac97.h" + +static struct snd_soc_dai_link em_x270_dai[] = { + { + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI], + .codec_dai = &wm9712_dai[WM9712_DAI_AC97_HIFI], + }, + { + .name = "AC97 Aux", + .stream_name = "AC97 Aux", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX], + .codec_dai = &wm9712_dai[WM9712_DAI_AC97_AUX], + }, +}; + +static struct snd_soc_machine em_x270 = { + .name = "EM-X270", + .dai_link = em_x270_dai, + .num_links = ARRAY_SIZE(em_x270_dai), +}; + +static struct snd_soc_device em_x270_snd_devdata = { + .machine = &em_x270, + .platform = &pxa2xx_soc_platform, + .codec_dev = &soc_codec_dev_wm9712, +}; + +static struct platform_device *em_x270_snd_device; + +static int __init em_x270_init(void) +{ + int ret; + + if (!machine_is_em_x270()) + return -ENODEV; + + em_x270_snd_device = platform_device_alloc("soc-audio", -1); + if (!em_x270_snd_device) + return -ENOMEM; + + platform_set_drvdata(em_x270_snd_device, &em_x270_snd_devdata); + em_x270_snd_devdata.dev = &em_x270_snd_device->dev; + ret = platform_device_add(em_x270_snd_device); + + if (ret) + platform_device_put(em_x270_snd_device); + + return ret; +} + +static void __exit em_x270_exit(void) +{ + platform_device_unregister(em_x270_snd_device); +} + +module_init(em_x270_init); +module_exit(em_x270_exit); + +/* Module information */ +MODULE_AUTHOR("Mike Rapoport"); +MODULE_DESCRIPTION("ALSA SoC EM-X270"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From f269002e61446ed3410d8ca5f06ebca1e2760cb5 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 27 May 2008 11:44:55 +0200 Subject: [ALSA] hda - Add support of Teradici controller Add the new PCI ID 0x6549 0x1200 Teradici controller. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 6ba7ac01d9f6..7f62196989a1 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -197,6 +197,10 @@ enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; #define ATIHDMI_NUM_CAPTURE 0 #define ATIHDMI_NUM_PLAYBACK 1 +/* TERA has 4 playback and 3 capture */ +#define TERA_NUM_CAPTURE 3 +#define TERA_NUM_PLAYBACK 4 + /* this number is statically defined for simplicity */ #define MAX_AZX_DEV 16 @@ -384,6 +388,7 @@ enum { AZX_DRIVER_SIS, AZX_DRIVER_ULI, AZX_DRIVER_NVIDIA, + AZX_DRIVER_TERA, }; static char *driver_short_names[] __devinitdata = { @@ -395,6 +400,7 @@ static char *driver_short_names[] __devinitdata = { [AZX_DRIVER_SIS] = "HDA SIS966", [AZX_DRIVER_ULI] = "HDA ULI M5461", [AZX_DRIVER_NVIDIA] = "HDA NVidia", + [AZX_DRIVER_TERA] = "HDA Teradici", }; /* @@ -1106,6 +1112,7 @@ static unsigned int azx_max_codecs[] __devinitdata = { [AZX_DRIVER_SIS] = 3, /* FIXME: correct? */ [AZX_DRIVER_ULI] = 3, /* FIXME: correct? */ [AZX_DRIVER_NVIDIA] = 3, /* FIXME: correct? */ + [AZX_DRIVER_TERA] = 1, }; static int __devinit azx_codec_create(struct azx *chip, const char *model, @@ -2229,6 +2236,8 @@ static struct pci_device_id azx_ids[] = { { PCI_DEVICE(0x10de, 0x0bd5), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0bd6), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0bd7), .driver_data = AZX_DRIVER_NVIDIA }, + /* Teradici */ + { PCI_DEVICE(0x6549, 0x1200), .driver_data = AZX_DRIVER_TERA }, { 0, } }; MODULE_DEVICE_TABLE(pci, azx_ids); -- cgit v1.2.3 From abbc9d1b25637b1948a4718fa8f7b257233136bc Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 27 May 2008 11:48:01 +0200 Subject: [ALSA] hda - Add ICH9 controller support (8086:2911) Added the missing PCI ID for ICH9 controller (8086:2911) Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 7f62196989a1..6e2dc4f5ca7a 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2184,6 +2184,7 @@ static struct pci_device_id azx_ids[] = { { PCI_DEVICE(0x8086, 0x27d8), .driver_data = AZX_DRIVER_ICH }, { PCI_DEVICE(0x8086, 0x269a), .driver_data = AZX_DRIVER_ICH }, { PCI_DEVICE(0x8086, 0x284b), .driver_data = AZX_DRIVER_ICH }, + { PCI_DEVICE(0x8086, 0x2911), .driver_data = AZX_DRIVER_ICH }, { PCI_DEVICE(0x8086, 0x293e), .driver_data = AZX_DRIVER_ICH }, { PCI_DEVICE(0x8086, 0x293f), .driver_data = AZX_DRIVER_ICH }, { PCI_DEVICE(0x8086, 0x3a3e), .driver_data = AZX_DRIVER_ICH }, -- cgit v1.2.3 From 6dda9f4a95905f2b38e79e3737da5e25397e6acb Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 27 May 2008 12:05:31 +0200 Subject: [ALSA] hda - Add ALC663 support Added the support of ALC663 codec, including specific models for ASUS M51VA, ASUS G71V, ASUS H13 and ASUS G50V. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 6 +- sound/pci/hda/patch_realtek.c | 289 +++++++++++++++++++++++- 2 files changed, 291 insertions(+), 4 deletions(-) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index e59569462cb9..f48939e97aba 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -845,7 +845,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ALC269 basic Basic preset - ALC662 + ALC662/663 3stack-dig 3-stack (2-channel) with SPDIF 3stack-6ch 3-stack (6-channel) 3stack-6ch-dig 3-stack (6-channel) with SPDIF @@ -853,6 +853,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. lenovo-101e Lenovo laptop eeepc-p701 ASUS Eeepc P701 eeepc-ep20 ASUS Eeepc EP20 + m51va ASUS M51VA + g71v ASUS G71V + h13 ASUS H13 + g50v ASUS G50V auto auto-config reading BIOS (default) ALC882/885 diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b0a2a262ece2..c659588e26d3 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -163,6 +163,10 @@ enum { ALC662_LENOVO_101E, ALC662_ASUS_EEEPC_P701, ALC662_ASUS_EEEPC_EP20, + ALC663_ASUS_M51VA, + ALC663_ASUS_G71V, + ALC663_ASUS_H13, + ALC663_ASUS_G50V, ALC662_AUTO, ALC662_MODEL_LAST, }; @@ -13251,6 +13255,23 @@ static struct hda_input_mux alc662_eeepc_capture_source = { }, }; +static struct hda_input_mux alc663_capture_source = { + .num_items = 3, + .items = { + { "Mic", 0x0 }, + { "Front Mic", 0x1 }, + { "Line", 0x2 }, + }, +}; + +static struct hda_input_mux alc663_m51va_capture_source = { + .num_items = 2, + .items = { + { "Ext-Mic", 0x0 }, + { "D-Mic", 0x9 }, + }, +}; + #define alc662_mux_enum_info alc_mux_enum_info #define alc662_mux_enum_get alc_mux_enum_get #define alc662_mux_enum_put alc882_mux_enum_put @@ -13431,6 +13452,44 @@ static struct snd_kcontrol_new alc662_eeepc_ep20_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new alc663_m51va_mixer[] = { + HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x21, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("DMic Playback Switch", 0x23, 0x9, HDA_INPUT), + { } /* end */ +}; + +static struct snd_kcontrol_new alc663_g71v_mixer[] = { + HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Front Playback Volume", 0x03, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Front Playback Switch", 0x15, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x21, 0x0, HDA_OUTPUT), + + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("i-Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("i-Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), + { } /* end */ +}; + +static struct snd_kcontrol_new alc663_g50v_mixer[] = { + HDA_CODEC_VOLUME("Speaker Playback Volume", 0x02, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x21, 0x0, HDA_OUTPUT), + + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("i-Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("i-Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), + { } /* end */ +}; + static struct snd_kcontrol_new alc662_chmode_mixer[] = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, @@ -13501,6 +13560,11 @@ static struct hda_verb alc662_init_verbs[] = { {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, + + /* always trun on EAPD */ + {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2}, + {0x15, AC_VERB_SET_EAPD_BTLENABLE, 2}, + { } }; @@ -13571,6 +13635,43 @@ static struct hda_verb alc662_auto_init_verbs[] = { { } }; +static struct hda_verb alc663_m51va_init_verbs[] = { + {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x21, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Headphone */ + + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)}, + + {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT}, + {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + {} +}; + +static struct hda_verb alc663_g71v_init_verbs[] = { + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + /* {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, */ + /* {0x15, AC_VERB_SET_CONNECT_SEL, 0x01}, */ /* Headphone */ + + {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x21, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Headphone */ + + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC880_FRONT_EVENT}, + {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC880_MIC_EVENT}, + {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN|ALC880_HP_EVENT}, + {} +}; + +static struct hda_verb alc663_g50v_init_verbs[] = { + {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x21, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Headphone */ + + {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT}, + {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + {} +}; + /* capture mixer elements */ static struct snd_kcontrol_new alc662_capture_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT), @@ -13692,6 +13793,125 @@ static void alc662_eeepc_ep20_inithook(struct hda_codec *codec) alc662_eeepc_ep20_automute(codec); } +static void alc663_m51va_speaker_automute(struct hda_codec *codec) +{ + unsigned int present; + unsigned char bits; + + present = snd_hda_codec_read(codec, 0x21, 0, + AC_VERB_GET_PIN_SENSE, 0) + & AC_PINSENSE_PRESENCE; + bits = present ? HDA_AMP_MUTE : 0; + snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); +} + +static void alc663_m51va_mic_automute(struct hda_codec *codec) +{ + unsigned int present; + + present = snd_hda_codec_read(codec, 0x18, 0, + AC_VERB_GET_PIN_SENSE, 0) + & AC_PINSENSE_PRESENCE; + snd_hda_codec_write_cache(codec, 0x22, 0, AC_VERB_SET_AMP_GAIN_MUTE, + 0x7000 | (0x00 << 8) | (present ? 0 : 0x80)); + snd_hda_codec_write_cache(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE, + 0x7000 | (0x00 << 8) | (present ? 0 : 0x80)); + snd_hda_codec_write_cache(codec, 0x22, 0, AC_VERB_SET_AMP_GAIN_MUTE, + 0x7000 | (0x09 << 8) | (present ? 0x80 : 0)); + snd_hda_codec_write_cache(codec, 0x23, 0, AC_VERB_SET_AMP_GAIN_MUTE, + 0x7000 | (0x09 << 8) | (present ? 0x80 : 0)); +} + +static void alc663_m51va_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + switch (res >> 26) { + case ALC880_HP_EVENT: + alc663_m51va_speaker_automute(codec); + break; + case ALC880_MIC_EVENT: + alc663_m51va_mic_automute(codec); + break; + } +} + +static void alc663_m51va_inithook(struct hda_codec *codec) +{ + alc663_m51va_speaker_automute(codec); + alc663_m51va_mic_automute(codec); +} + +static void alc663_g71v_hp_automute(struct hda_codec *codec) +{ + unsigned int present; + unsigned char bits; + + present = snd_hda_codec_read(codec, 0x21, 0, + AC_VERB_GET_PIN_SENSE, 0) + & AC_PINSENSE_PRESENCE; + bits = present ? HDA_AMP_MUTE : 0; + snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); + snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); +} + +static void alc663_g71v_front_automute(struct hda_codec *codec) +{ + unsigned int present; + unsigned char bits; + + present = snd_hda_codec_read(codec, 0x15, 0, + AC_VERB_GET_PIN_SENSE, 0) + & AC_PINSENSE_PRESENCE; + bits = present ? HDA_AMP_MUTE : 0; + snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0, + HDA_AMP_MUTE, bits); +} + +static void alc663_g71v_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + switch (res >> 26) { + case ALC880_HP_EVENT: + alc663_g71v_hp_automute(codec); + break; + case ALC880_FRONT_EVENT: + alc663_g71v_front_automute(codec); + break; + case ALC880_MIC_EVENT: + alc662_eeepc_mic_automute(codec); + break; + } +} + +static void alc663_g71v_inithook(struct hda_codec *codec) +{ + alc663_g71v_front_automute(codec); + alc663_g71v_hp_automute(codec); + alc662_eeepc_mic_automute(codec); +} + +static void alc663_g50v_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + switch (res >> 26) { + case ALC880_HP_EVENT: + alc663_m51va_speaker_automute(codec); + break; + case ALC880_MIC_EVENT: + alc662_eeepc_mic_automute(codec); + break; + } +} + +static void alc663_g50v_inithook(struct hda_codec *codec) +{ + alc663_m51va_speaker_automute(codec); + alc662_eeepc_mic_automute(codec); +} + #ifdef CONFIG_SND_HDA_POWER_SAVE #define alc662_loopbacks alc880_loopbacks #endif @@ -13714,14 +13934,24 @@ static const char *alc662_models[ALC662_MODEL_LAST] = { [ALC662_LENOVO_101E] = "lenovo-101e", [ALC662_ASUS_EEEPC_P701] = "eeepc-p701", [ALC662_ASUS_EEEPC_EP20] = "eeepc-ep20", + [ALC663_ASUS_M51VA] = "m51va", + [ALC663_ASUS_G71V] = "g71v", + [ALC663_ASUS_H13] = "h13", + [ALC663_ASUS_G50V] = "g50v", [ALC662_AUTO] = "auto", }; static struct snd_pci_quirk alc662_cfg_tbl[] = { + SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS G71V", ALC663_ASUS_G71V), + SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M51VA", ALC663_ASUS_M51VA), + SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS M51VA", ALC663_ASUS_G50V), SND_PCI_QUIRK(0x1043, 0x8290, "ASUS P5GC-MX", ALC662_3ST_6ch_DIG), SND_PCI_QUIRK(0x1043, 0x82a1, "ASUS Eeepc", ALC662_ASUS_EEEPC_P701), SND_PCI_QUIRK(0x1043, 0x82d1, "ASUS Eeepc EP20", ALC662_ASUS_EEEPC_EP20), SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E), + SND_PCI_QUIRK(0x1854, 0x2000, "ASUS H13-2000", ALC663_ASUS_H13), + SND_PCI_QUIRK(0x1854, 0x2001, "ASUS H13-2001", ALC663_ASUS_H13), + SND_PCI_QUIRK(0x1854, 0x2002, "ASUS H13-2002", ALC663_ASUS_H13), {} }; @@ -13809,7 +14039,53 @@ static struct alc_config_preset alc662_presets[] = { .unsol_event = alc662_eeepc_ep20_unsol_event, .init_hook = alc662_eeepc_ep20_inithook, }, - + [ALC663_ASUS_M51VA] = { + .mixers = { alc663_m51va_mixer, alc662_capture_mixer}, + .init_verbs = { alc662_init_verbs, alc663_m51va_init_verbs }, + .num_dacs = ARRAY_SIZE(alc662_dac_nids), + .dac_nids = alc662_dac_nids, + .dig_out_nid = ALC662_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes), + .channel_mode = alc662_3ST_2ch_modes, + .input_mux = &alc663_m51va_capture_source, + .unsol_event = alc663_m51va_unsol_event, + .init_hook = alc663_m51va_inithook, + }, + [ALC663_ASUS_G71V] = { + .mixers = { alc663_g71v_mixer, alc662_capture_mixer}, + .init_verbs = { alc662_init_verbs, alc663_g71v_init_verbs }, + .num_dacs = ARRAY_SIZE(alc662_dac_nids), + .dac_nids = alc662_dac_nids, + .dig_out_nid = ALC662_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes), + .channel_mode = alc662_3ST_2ch_modes, + .input_mux = &alc662_eeepc_capture_source, + .unsol_event = alc663_g71v_unsol_event, + .init_hook = alc663_g71v_inithook, + }, + [ALC663_ASUS_H13] = { + .mixers = { alc663_m51va_mixer, alc662_capture_mixer}, + .init_verbs = { alc662_init_verbs, alc663_m51va_init_verbs }, + .num_dacs = ARRAY_SIZE(alc662_dac_nids), + .dac_nids = alc662_dac_nids, + .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes), + .channel_mode = alc662_3ST_2ch_modes, + .input_mux = &alc663_m51va_capture_source, + .unsol_event = alc663_m51va_unsol_event, + .init_hook = alc663_m51va_inithook, + }, + [ALC663_ASUS_G50V] = { + .mixers = { alc663_g50v_mixer, alc662_capture_mixer}, + .init_verbs = { alc662_init_verbs, alc663_g50v_init_verbs }, + .num_dacs = ARRAY_SIZE(alc662_dac_nids), + .dac_nids = alc662_dac_nids, + .dig_out_nid = ALC662_DIGOUT_NID, + .num_channel_mode = ARRAY_SIZE(alc662_3ST_6ch_modes), + .channel_mode = alc662_3ST_6ch_modes, + .input_mux = &alc663_capture_source, + .unsol_event = alc663_g50v_unsol_event, + .init_hook = alc663_g50v_inithook, + }, }; @@ -14108,11 +14384,17 @@ static int patch_alc662(struct hda_codec *codec) if (board_config != ALC662_AUTO) setup_preset(spec, &alc662_presets[board_config]); - spec->stream_name_analog = "ALC662 Analog"; + if (codec->vendor_id == 0x10ec0663) { + spec->stream_name_analog = "ALC663 Analog"; + spec->stream_name_digital = "ALC663 Digital"; + } else { + spec->stream_name_analog = "ALC662 Analog"; + spec->stream_name_digital = "ALC662 Digital"; + } + spec->stream_analog_playback = &alc662_pcm_analog_playback; spec->stream_analog_capture = &alc662_pcm_analog_capture; - spec->stream_name_digital = "ALC662 Digital"; spec->stream_digital_playback = &alc662_pcm_digital_playback; spec->stream_digital_capture = &alc662_pcm_digital_capture; @@ -14151,6 +14433,7 @@ struct hda_codec_preset snd_hda_preset_realtek[] = { .patch = patch_alc883 }, { .id = 0x10ec0662, .rev = 0x100101, .name = "ALC662 rev1", .patch = patch_alc662 }, + { .id = 0x10ec0663, .name = "ALC663", .patch = patch_alc662 }, { .id = 0x10ec0880, .name = "ALC880", .patch = patch_alc880 }, { .id = 0x10ec0882, .name = "ALC882", .patch = patch_alc882 }, { .id = 0x10ec0883, .name = "ALC883", .patch = patch_alc883 }, -- cgit v1.2.3 From 531240ff520406c793a110e1c0f187d931f47d66 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 27 May 2008 12:10:25 +0200 Subject: [ALSA] hda - Fix vref pincap check in alc882 auto-detection Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c659588e26d3..8174050da15f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6357,7 +6357,9 @@ static void alc882_auto_init_analog_input(struct hda_codec *codec) continue; vref = PIN_IN; if (1 /*i <= AUTO_PIN_FRONT_MIC*/) { - if (snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP) & + unsigned int pincap; + pincap = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP); + if ((pincap >> AC_PINCAP_VREF_SHIFT) & AC_PINCAP_VREF_80) vref = PIN_VREF80; } -- cgit v1.2.3 From 2f8932863d243a744ccd3dc005490ad9d2eae478 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 27 May 2008 12:14:47 +0200 Subject: [ALSA] hda - show correct codec chip in PCM stream names Show more exact codec chip name in the PCM stream name strings. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 47 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 39 insertions(+), 8 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8174050da15f..5770b9c3efa2 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6491,14 +6491,20 @@ static int patch_alc882(struct hda_codec *codec) if (board_config != ALC882_AUTO) setup_preset(spec, &alc882_presets[board_config]); - spec->stream_name_analog = "ALC882 Analog"; + if (codec->vendor_id == 0x10ec0885) { + spec->stream_name_analog = "ALC885 Analog"; + spec->stream_name_digital = "ALC885 Digital"; + } else { + spec->stream_name_analog = "ALC882 Analog"; + spec->stream_name_digital = "ALC882 Digital"; + } + spec->stream_analog_playback = &alc882_pcm_analog_playback; spec->stream_analog_capture = &alc882_pcm_analog_capture; /* FIXME: setup DAC5 */ /*spec->stream_analog_alt_playback = &alc880_pcm_analog_alt_playback;*/ spec->stream_analog_alt_capture = &alc880_pcm_analog_alt_capture; - spec->stream_name_digital = "ALC882 Digital"; spec->stream_digital_playback = &alc882_pcm_digital_playback; spec->stream_digital_capture = &alc882_pcm_digital_capture; @@ -8177,12 +8183,25 @@ static int patch_alc883(struct hda_codec *codec) if (board_config != ALC883_AUTO) setup_preset(spec, &alc883_presets[board_config]); - spec->stream_name_analog = "ALC883 Analog"; + switch (codec->vendor_id) { + case 0x10ec0888: + spec->stream_name_analog = "ALC888 Analog"; + spec->stream_name_digital = "ALC888 Digital"; + break; + case 0x10ec0889: + spec->stream_name_analog = "ALC889 Analog"; + spec->stream_name_digital = "ALC889 Digital"; + break; + default: + spec->stream_name_analog = "ALC883 Analog"; + spec->stream_name_digital = "ALC883 Digital"; + break; + } + spec->stream_analog_playback = &alc883_pcm_analog_playback; spec->stream_analog_capture = &alc883_pcm_analog_capture; spec->stream_analog_alt_capture = &alc883_pcm_analog_alt_capture; - spec->stream_name_digital = "ALC883 Digital"; spec->stream_digital_playback = &alc883_pcm_digital_playback; spec->stream_digital_capture = &alc883_pcm_digital_capture; @@ -10680,12 +10699,18 @@ static int patch_alc268(struct hda_codec *codec) if (board_config != ALC268_AUTO) setup_preset(spec, &alc268_presets[board_config]); - spec->stream_name_analog = "ALC268 Analog"; + if (codec->vendor_id == 0x10ec0267) { + spec->stream_name_analog = "ALC267 Analog"; + spec->stream_name_digital = "ALC267 Digital"; + } else { + spec->stream_name_analog = "ALC268 Analog"; + spec->stream_name_digital = "ALC268 Digital"; + } + spec->stream_analog_playback = &alc268_pcm_analog_playback; spec->stream_analog_capture = &alc268_pcm_analog_capture; spec->stream_analog_alt_capture = &alc268_pcm_analog_alt_capture; - spec->stream_name_digital = "ALC268 Digital"; spec->stream_digital_playback = &alc268_pcm_digital_playback; if (!query_amp_caps(codec, 0x1d, HDA_INPUT)) @@ -13174,11 +13199,17 @@ static int patch_alc861vd(struct hda_codec *codec) if (board_config != ALC861VD_AUTO) setup_preset(spec, &alc861vd_presets[board_config]); - spec->stream_name_analog = "ALC861VD Analog"; + if (codec->vendor_id == 0x10ec0660) { + spec->stream_name_analog = "ALC660-VD Analog"; + spec->stream_name_digital = "ALC660-VD Digital"; + } else { + spec->stream_name_analog = "ALC861VD Analog"; + spec->stream_name_digital = "ALC861VD Digital"; + } + spec->stream_analog_playback = &alc861vd_pcm_analog_playback; spec->stream_analog_capture = &alc861vd_pcm_analog_capture; - spec->stream_name_digital = "ALC861VD Digital"; spec->stream_digital_playback = &alc861vd_pcm_digital_playback; spec->stream_digital_capture = &alc861vd_pcm_digital_capture; -- cgit v1.2.3 From f9423e7a94eb2dfef3503dde76d17eaf342ab962 Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 27 May 2008 12:32:25 +0200 Subject: [ALSA] hda - Fix EAPD and COEF setups for realtek codecs Fixed EAPD and COEF setups for Realtek ALC662/663, 660-VD and 888 codecs. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 37 +++++++++++++++++++++++++++++++++++-- 1 file changed, 35 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 5770b9c3efa2..cb3e0283f0ce 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -780,6 +780,24 @@ static void alc_sku_unsol_event(struct hda_codec *codec, unsigned int res) alc_sku_automute(codec); } +/* additional initialization for ALC888 variants */ +static void alc888_coef_init(struct hda_codec *codec) +{ + unsigned int tmp; + + snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 0); + tmp = snd_hda_codec_read(codec, 0x20, 0, AC_VERB_GET_PROC_COEF, 0); + snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 7); + if ((tmp & 0xf0) == 2) + /* alc888S-VC */ + snd_hda_codec_read(codec, 0x20, 0, + AC_VERB_SET_PROC_COEF, 0x830); + else + /* alc888-VB */ + snd_hda_codec_read(codec, 0x20, 0, + AC_VERB_SET_PROC_COEF, 0x3030); +} + /* 32-bit subsystem ID for BIOS loading in HD Audio codec. * 31 ~ 16 : Manufacture ID * 15 ~ 8 : SKU ID @@ -855,8 +873,10 @@ do_sku: case 0x10ec0267: case 0x10ec0268: case 0x10ec0269: + case 0x10ec0660: + case 0x10ec0662: + case 0x10ec0663: case 0x10ec0862: - case 0x10ec0662: case 0x10ec0889: snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_EAPD_BTLENABLE, 2); @@ -881,7 +901,6 @@ do_sku: case 0x10ec0882: case 0x10ec0883: case 0x10ec0885: - case 0x10ec0888: case 0x10ec0889: snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 7); @@ -893,6 +912,9 @@ do_sku: AC_VERB_SET_PROC_COEF, tmp | 0x2010); break; + case 0x10ec0888: + alc888_coef_init(codec); + break; case 0x10ec0267: case 0x10ec0268: snd_hda_codec_write(codec, 0x20, 0, @@ -8214,6 +8236,9 @@ static int patch_alc883(struct hda_codec *codec) codec->patch_ops = alc_patch_ops; if (board_config == ALC883_AUTO) spec->init_hook = alc883_auto_init; + else if (codec->vendor_id == 0x10ec0888) + spec->init_hook = alc888_coef_init; + #ifdef CONFIG_SND_HDA_POWER_SAVE if (!spec->loopback.amplist) spec->loopback.amplist = alc883_loopbacks; @@ -12662,6 +12687,12 @@ static struct hda_verb alc861vd_eapd_verbs[] = { { } }; +static struct hda_verb alc660vd_eapd_verbs[] = { + {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2}, + {0x15, AC_VERB_SET_EAPD_BTLENABLE, 2}, + { } +}; + static struct hda_verb alc861vd_lenovo_unsol_verbs[] = { {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, @@ -13202,6 +13233,8 @@ static int patch_alc861vd(struct hda_codec *codec) if (codec->vendor_id == 0x10ec0660) { spec->stream_name_analog = "ALC660-VD Analog"; spec->stream_name_digital = "ALC660-VD Digital"; + /* always turn on EAPD */ + spec->init_verbs[spec->num_init_verbs++] = alc660vd_eapd_verbs; } else { spec->stream_name_analog = "ALC861VD Analog"; spec->stream_name_digital = "ALC861VD Digital"; -- cgit v1.2.3 From dd564d0cf08686cf0cc332bf9d48cba5b26a8171 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 27 May 2008 18:03:56 +0200 Subject: x86: aperture_64.c: cleanups Some small cleanups for aperture_64.c; they should not really change any code. Signed-off-by: Pavel Machek Cc: Dave Jones Cc: Andi Kleen Signed-off-by: Thomas Gleixner --- arch/x86/kernel/aperture_64.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 5373f7834d8a..6eea42eb287b 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -111,7 +111,7 @@ static u32 __init allocate_aperture(void) /* Find a PCI capability */ -static __u32 __init find_cap(int bus, int slot, int func, int cap) +static u32 __init find_cap(int bus, int slot, int func, int cap) { int bytes; u8 pos; @@ -137,7 +137,7 @@ static __u32 __init find_cap(int bus, int slot, int func, int cap) } /* Read a standard AGPv3 bridge header */ -static __u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) +static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) { u32 apsize; u32 apsizereg; @@ -202,7 +202,7 @@ static __u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) * the AGP bridges should be always an own bus on the HT hierarchy, * but do it here for future safety. */ -static __u32 __init search_agp_bridge(u32 *order, int *valid_agp) +static u32 __init search_agp_bridge(u32 *order, int *valid_agp) { int bus, slot, func; -- cgit v1.2.3 From b1829d2705daa7cb72eb1e08bdc8b7e9fad34266 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 28 May 2008 01:22:08 +0200 Subject: ftrace: fix merge Signed-off-by: Ingo Molnar --- include/linux/ftrace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index ffbbd54a720e..b482fe88bc04 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -122,7 +122,7 @@ static inline void tracer_disable(void) # define trace_preempt_off(a0, a1) do { } while (0) #endif -#ifdef CONFIG_CONTEXT_SWITCH_TRACER +#ifdef CONFIG_TRACING extern void ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3); #else -- cgit v1.2.3 From b20aeccd6ad42ccb6be1b3d1d32618ddd2b31bf0 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 28 May 2008 14:24:38 +0200 Subject: xen: fix early bootup crash on native hardware -tip tree auto-testing found the following early bootup hang: --------------> get_memcfg_from_srat: assigning address to rsdp RSD PTR v0 [Nvidia] BUG: Int 14: CR2 ffd00040 EDI 8092fbfe ESI ffd00040 EBP 80b0aee8 ESP 80b0aed0 EBX 000f76f0 EDX 0000000e ECX 00000003 EAX ffd00040 err 00000000 EIP 802c055a CS 00000060 flg 00010006 Stack: ffd00040 80bc78d0 80b0af6c 80b1dbfe 8093d8ba 00000008 80b42810 80b4ddb4 80b42842 00000000 80b0af1c 801079c8 808e724e 00000000 80b42871 802c0531 00000100 00000000 0003fff0 80b0af40 80129999 00040100 00040100 00000000 Pid: 0, comm: swapper Not tainted 2.6.26-rc4-sched-devel.git #570 [<802c055a>] ? strncmp+0x11/0x25 [<80b1dbfe>] ? get_memcfg_from_srat+0xb4/0x568 [<801079c8>] ? mcount_call+0x5/0x9 [<802c0531>] ? strcmp+0xa/0x22 [<80129999>] ? printk+0x38/0x3a [<80129999>] ? printk+0x38/0x3a [<8011b122>] ? memory_present+0x66/0x6f [<80b216b4>] ? setup_memory+0x13/0x40c [<80b16b47>] ? propagate_e820_map+0x80/0x97 [<80b1622a>] ? setup_arch+0x248/0x477 [<80129999>] ? printk+0x38/0x3a [<80b11759>] ? start_kernel+0x6e/0x2eb [<80b110fc>] ? i386_start_kernel+0xeb/0xf2 ======================= <------ with this config: http://redhat.com/~mingo/misc/config-Wed_May_28_01_33_33_CEST_2008.bad The thing is, the crash makes little sense at first sight. We crash on a benign-looking printk. The code around it got changed in -tip but checking those topic branches individually did not reproduce the bug. Bisection led to this commit: | d5edbc1f75420935b1ec7e65df10c8f81cea82de is first bad commit | commit d5edbc1f75420935b1ec7e65df10c8f81cea82de | Author: Jeremy Fitzhardinge | Date: Mon May 26 23:31:22 2008 +0100 | | xen: add p2m mfn_list_list Which is somewhat surprising, as on native hardware Xen client side should have little to no side-effects. After some head scratching, it turns out the following happened: randconfig enabled the following Xen options: CONFIG_XEN=y CONFIG_XEN_MAX_DOMAIN_MEMORY=8 # CONFIG_XEN_BLKDEV_FRONTEND is not set # CONFIG_XEN_NETDEV_FRONTEND is not set CONFIG_HVC_XEN=y # CONFIG_XEN_BALLOON is not set which activated this piece of code in arch/x86/xen/mmu.c: > @@ -69,6 +69,13 @@ > __attribute__((section(".data.page_aligned"))) = > { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] }; > > +/* Arrays of p2m arrays expressed in mfns used for save/restore */ > +static unsigned long p2m_top_mfn[TOP_ENTRIES] > + __attribute__((section(".bss.page_aligned"))); > + > +static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE] > + __attribute__((section(".bss.page_aligned"))); The problem is, you must only put variables into .bss.page_aligned that have a _size_ that is _exactly_ page aligned. In this case the size of p2m_top_mfn_list is not page aligned: 80b8d000 b p2m_top_mfn 80b8f000 b p2m_top_mfn_list 80b8f008 b softirq_stack 80b97008 b hardirq_stack 80b9f008 b bm_pte So all subsequent variables get unaligned which, depending on luck, breaks the kernel in various funny ways. In this case what killed the kernel first was the misaligned bootmap pte page, resulting in that creative crash above. Anyway, this was a fun bug to track down :-) I think the moral is that .bss.page_aligned is a dangerous construct in its current form, and the symptoms of breakage are very non-trivial, so i think we need build-time checks to make sure all symbols in .bss.page_aligned are truly page aligned. The Xen fix below gets the kernel booting again. Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index e95955968ba3..eef3b5c6e2fe 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -73,7 +73,8 @@ static unsigned long *p2m_top[TOP_ENTRIES] static unsigned long p2m_top_mfn[TOP_ENTRIES] __attribute__((section(".bss.page_aligned"))); -static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE] +static unsigned long p2m_top_mfn_list[ + PAGE_ALIGN(TOP_ENTRIES / P2M_ENTRIES_PER_PAGE)] __attribute__((section(".bss.page_aligned"))); static inline unsigned p2m_top_index(unsigned long pfn) -- cgit v1.2.3 From a93bbaa77ea61c6bad684263a65f812b31bf9791 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 27 May 2008 17:59:24 +0200 Subject: [ALSA] Improve the slots option handling Fix and improve the slots option handling. The sound core tries to find the slot with the given module name first and assign if it's still available. If all pre-given slots are unavailable, then try to find another free slot. Also, when a module name begins with '!', it means the negative match: the slot will be given for any modules but that one. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 4 ++ sound/core/init.c | 67 +++++++++++++++---------- 2 files changed, 44 insertions(+), 27 deletions(-) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index f48939e97aba..529073dea196 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -2271,6 +2271,10 @@ case above again, the first two slots are already reserved. If any other driver (e.g. snd-usb-audio) is loaded before snd-interwave or snd-ens1371, it will be assigned to the third or later slot. +When a module name is given with '!', the slot will be given for any +modules but that name. For example, "slots=!snd-pcsp" will reserve +the first slot for any modules but snd-pcsp. + ALSA PCM devices to OSS devices mapping ======================================= diff --git a/sound/core/init.c b/sound/core/init.c index ac0573416130..5c254d498ae0 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -46,17 +46,24 @@ static char *slots[SNDRV_CARDS]; module_param_array(slots, charp, NULL, 0444); MODULE_PARM_DESC(slots, "Module names assigned to the slots."); -/* return non-zero if the given index is already reserved for another +/* return non-zero if the given index is reserved for the given * module via slots option */ -static int module_slot_mismatch(struct module *module, int idx) +static int module_slot_match(struct module *module, int idx) { + int match = 1; #ifdef MODULE - char *s1, *s2; + const char *s1, *s2; + if (!module || !module->name || !slots[idx]) return 0; - s1 = slots[idx]; - s2 = module->name; + + s1 = module->name; + s2 = slots[idx]; + if (*s2 == '!') { + match = 0; /* negative match */ + s2++; + } /* compare module name strings * hyphens are handled as equivalent with underscore */ @@ -68,12 +75,12 @@ static int module_slot_mismatch(struct module *module, int idx) if (c2 == '-') c2 = '_'; if (c1 != c2) - return 1; + return !match; if (!c1) break; } -#endif - return 0; +#endif /* MODULE */ + return match; } #if defined(CONFIG_SND_MIXER_OSS) || defined(CONFIG_SND_MIXER_OSS_MODULE) @@ -129,7 +136,7 @@ struct snd_card *snd_card_new(int idx, const char *xid, struct module *module, int extra_size) { struct snd_card *card; - int err; + int err, idx2; if (extra_size < 0) extra_size = 0; @@ -144,35 +151,41 @@ struct snd_card *snd_card_new(int idx, const char *xid, err = 0; mutex_lock(&snd_card_mutex); if (idx < 0) { - int idx2; for (idx2 = 0; idx2 < SNDRV_CARDS; idx2++) /* idx == -1 == 0xffff means: take any free slot */ if (~snd_cards_lock & idx & 1<= snd_ecards_limit) - snd_ecards_limit = idx + 1; - break; + if (module_slot_match(module, idx2)) { + idx = idx2; + break; + } + } + } + if (idx < 0) { + for (idx2 = 0; idx2 < SNDRV_CARDS; idx2++) + /* idx == -1 == 0xffff means: take any free slot */ + if (~snd_cards_lock & idx & 1<= SNDRV_CARDS) + err = -ENODEV; + if (err < 0) { mutex_unlock(&snd_card_mutex); snd_printk(KERN_ERR "cannot find the slot for index %d (range 0-%i), error: %d\n", idx, snd_ecards_limit - 1, err); goto __error; } snd_cards_lock |= 1 << idx; /* lock it */ + if (idx >= snd_ecards_limit) + snd_ecards_limit = idx + 1; /* increase the limit */ mutex_unlock(&snd_card_mutex); card->number = idx; card->module = module; -- cgit v1.2.3 From 3c65e8743bf8b5cf0f90e8d767bf1d8b50c14c76 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 28 May 2008 08:58:56 -0500 Subject: JFS: diAlloc() should return -EIO rather than EIO The comment above the function says one of its return value is -EIO, and also the caller of diAlloc() checks for -EIO: struct inode *ialloc(struct inode *parent, umode_t mode) { ... rc = diAlloc(parent, S_ISDIR(mode), inode); if (rc) { jfs_warn("ialloc: diAlloc returned %d!", rc); if (rc == -EIO) make_bad_inode(inode); ... Signed-off-by: Li Zefan Signed-off-by: Dave Kleikamp --- fs/jfs/jfs_imap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c index 734ec916beaf..d6363d8309d0 100644 --- a/fs/jfs/jfs_imap.c +++ b/fs/jfs/jfs_imap.c @@ -1520,7 +1520,7 @@ int diAlloc(struct inode *pip, bool dir, struct inode *ip) jfs_error(ip->i_sb, "diAlloc: can't find free bit " "in wmap"); - return EIO; + return -EIO; } /* determine the inode number within the -- cgit v1.2.3 From c7d624d1ee7b77622305bd638755394e4d3f2d2f Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 28 May 2008 12:57:13 -0400 Subject: x86: Fix up silly i1586 boot message. Trying to boot a 64-bit kernel on a 32bit Pentium 4 gets you an amusing message along the lines of. "you need an x86-64, but you only have an i1586" due to the P4 being family F. Munge it to be 686. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/boot/cpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c index 00e19edd852c..92d6fd73dc7d 100644 --- a/arch/x86/boot/cpu.c +++ b/arch/x86/boot/cpu.c @@ -28,6 +28,8 @@ static char *cpu_name(int level) if (level == 64) { return "x86-64"; } else { + if (level == 15) + level = 6; sprintf(buf, "i%d86", level); return buf; } -- cgit v1.2.3 From 19ec673ced067316b9732bc6d1c4ff4052e5f795 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Wed, 28 May 2008 23:00:47 +0400 Subject: x86: nmi - fix incorrect NMI watchdog used by default The commit commit 4b82b277707a39b97271439c475f186f63ec4692 Author: Cyrill Gorcunov Date: Sat May 24 19:36:35 2008 +0400 set nmi_watchdog to NMI_IO_APIC as by default. This causes hangs on some machines with buggy watchdogs. Fix it - i.e. restore old behaviour. Thanks to Sitsofe Wheeler and Adrian Bunk for catching the problem and Maciej W. Rozycki for explanation what is going on there. Signed-off-by: Cyrill Gorcunov CC: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/nmi.c | 16 +++++++++------- include/asm-x86/nmi.h | 4 +++- 2 files changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index 69a839fc1eb0..3671a9f3564b 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -84,20 +84,15 @@ static inline unsigned int get_timer_irqs(int cpu) #endif } +#ifdef CONFIG_X86_64 /* Run after command line and cpu_init init, but before all other checks */ void nmi_watchdog_default(void) { if (nmi_watchdog != NMI_DEFAULT) return; -#ifdef CONFIG_X86_64 nmi_watchdog = NMI_NONE; -#else - if (lapic_watchdog_ok()) - nmi_watchdog = NMI_LOCAL_APIC; - else - nmi_watchdog = NMI_IO_APIC; -#endif } +#endif #ifdef CONFIG_SMP /* @@ -488,8 +483,15 @@ int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file, return -EIO; } +#ifdef CONFIG_X86_64 /* if nmi_watchdog is not set yet, then set it */ nmi_watchdog_default(); +#else + if (lapic_watchdog_ok()) + nmi_watchdog = NMI_LOCAL_APIC; + else + nmi_watchdog = NMI_IO_APIC; +#endif if (nmi_watchdog == NMI_LOCAL_APIC) { if (nmi_watchdog_enabled) diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 1e8f34d7ab68..6f4d44fc051f 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -38,9 +38,11 @@ static inline void unset_nmi_pm_callback(struct pm_dev *dev) #ifdef CONFIG_X86_64 extern void default_do_nmi(struct pt_regs *); +extern void nmi_watchdog_default(void); +#else +#define nmi_watchdog_default(void) do {} while (0) #endif -extern void nmi_watchdog_default(void); extern void die_nmi(char *str, struct pt_regs *regs, int do_panic); extern int check_nmi_watchdog(void); extern int nmi_watchdog_enabled; -- cgit v1.2.3 From e13ac2e9b18bde51cf32c69c2209df25791ab3e5 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 28 May 2008 17:58:05 +0100 Subject: [ALSA] ASoC: Add SOC_DOUBLE_S8_TLV control type The SOC_DOUBLE_S8_TLV control type was originally implemented in the UDA1380 driver by Philipp Zabel and was moved into the core by me. Signed-off-by: Philipp Zabel Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai --- include/sound/soc.h | 15 +++++++++++ sound/soc/soc-core.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 87 insertions(+) diff --git a/include/sound/soc.h b/include/sound/soc.h index bca9538d9e50..9fa2093e74eb 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -73,6 +73,15 @@ .get = snd_soc_get_volsw_2r, .put = snd_soc_put_volsw_2r, \ .private_value = (reg_left) | ((shift) << 8) | \ ((max) << 12) | ((invert) << 20) | ((reg_right) << 24) } +#define SOC_DOUBLE_S8_TLV(xname, reg, min, max, tlv_array) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ + SNDRV_CTL_ELEM_ACCESS_READWRITE, \ + .tlv.p = (tlv_array), \ + .info = snd_soc_info_volsw_s8, .get = snd_soc_get_volsw_s8, \ + .put = snd_soc_put_volsw_s8, \ + .private_value = (reg) | (((signed char)max) << 16) | \ + (((signed char)min) << 24) } #define SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, xmask, xtexts) \ { .reg = xreg, .shift_l = xshift_l, .shift_r = xshift_r, \ .mask = xmask, .texts = xtexts } @@ -267,6 +276,12 @@ int snd_soc_get_volsw_2r(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); int snd_soc_put_volsw_2r(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); +int snd_soc_info_volsw_s8(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo); +int snd_soc_get_volsw_s8(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int snd_soc_put_volsw_s8(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); /* SoC PCM stream information */ struct snd_soc_pcm_stream { diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index a3f091e0843a..f594ab888e17 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1589,6 +1589,78 @@ int snd_soc_put_volsw_2r(struct snd_kcontrol *kcontrol, } EXPORT_SYMBOL_GPL(snd_soc_put_volsw_2r); +/** + * snd_soc_info_volsw_s8 - signed mixer info callback + * @kcontrol: mixer control + * @uinfo: control element information + * + * Callback to provide information about a signed mixer control. + * + * Returns 0 for success. + */ +int snd_soc_info_volsw_s8(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + int max = (signed char)((kcontrol->private_value >> 16) & 0xff); + int min = (signed char)((kcontrol->private_value >> 24) & 0xff); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = max-min; + return 0; +} +EXPORT_SYMBOL_GPL(snd_soc_info_volsw_s8); + +/** + * snd_soc_get_volsw_s8 - signed mixer get callback + * @kcontrol: mixer control + * @uinfo: control element information + * + * Callback to get the value of a signed mixer control. + * + * Returns 0 for success. + */ +int snd_soc_get_volsw_s8(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + int reg = kcontrol->private_value & 0xff; + int min = (signed char)((kcontrol->private_value >> 24) & 0xff); + int val = snd_soc_read(codec, reg); + + ucontrol->value.integer.value[0] = + ((signed char)(val & 0xff))-min; + ucontrol->value.integer.value[1] = + ((signed char)((val >> 8) & 0xff))-min; + return 0; +} +EXPORT_SYMBOL_GPL(snd_soc_get_volsw_s8); + +/** + * snd_soc_put_volsw_sgn - signed mixer put callback + * @kcontrol: mixer control + * @uinfo: control element information + * + * Callback to set the value of a signed mixer control. + * + * Returns 0 for success. + */ +int snd_soc_put_volsw_s8(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + int reg = kcontrol->private_value & 0xff; + int min = (signed char)((kcontrol->private_value >> 24) & 0xff); + unsigned short val; + + val = (ucontrol->value.integer.value[0]+min) & 0xff; + val |= ((ucontrol->value.integer.value[1]+min) & 0xff) << 8; + + return snd_soc_update_bits(codec, reg, 0xffff, val); +} +EXPORT_SYMBOL_GPL(snd_soc_put_volsw_s8); + static int __devinit snd_soc_init(void) { printk(KERN_INFO "ASoC version %s\n", SND_SOC_VERSION); -- cgit v1.2.3 From b7482f52789266e2548be5d0f6420c9fc12428d8 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Wed, 28 May 2008 17:58:06 +0100 Subject: [ALSA] ASoC: Add UDA1380 driver The UDA1380 codec is used by the HTC Magician and a number of Samsung reference boards. This driver has had a long out of tree history, having originally been written by Giorgio Padrin and converted to ASoC by Richard Purdie. Since conversion to ASoC most of the work on the driver has been done by Philipp Zabel with some review and updates for new APIs by Liam Girdwood and Mark Brown. Signed-off-by: Richard Purdie Signed-off-by: Philipp Zabel Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown Signed-off-by: Takashi Iwai --- sound/soc/codecs/Kconfig | 3 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/uda1380.c | 852 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/uda1380.h | 89 +++++ 4 files changed, 946 insertions(+) create mode 100644 sound/soc/codecs/uda1380.c create mode 100644 sound/soc/codecs/uda1380.h diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index d4a5fe42f6e0..7beefccfa821 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -2,6 +2,9 @@ config SND_SOC_AC97_CODEC tristate select SND_AC97_CODEC +config SND_SOC_UDA1380 + tristate + config SND_SOC_WM8731 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 4e1314c9d3ec..d5926a117078 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -1,4 +1,5 @@ snd-soc-ac97-objs := ac97.o +snd-soc-uda1380-objs := uda1380.o snd-soc-wm8731-objs := wm8731.o snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o @@ -8,6 +9,7 @@ snd-soc-cs4270-objs := cs4270.o snd-soc-tlv320aic3x-objs := tlv320aic3x.o obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o +obj-$(CONFIG_SND_SOC_UDA1380) += snd-soc-uda1380.o obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c new file mode 100644 index 000000000000..cb50486201f1 --- /dev/null +++ b/sound/soc/codecs/uda1380.c @@ -0,0 +1,852 @@ +/* + * uda1380.c - Philips UDA1380 ALSA SoC audio driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Copyright (c) 2007 Philipp Zabel + * Improved support for DAPM and audio routing/mixing capabilities, + * added TLV support. + * + * Modified by Richard Purdie to fit into SoC + * codec model. + * + * Copyright (c) 2005 Giorgio Padrin + * Copyright 2005 Openedhand Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "uda1380.h" + +#define UDA1380_VERSION "0.6" +#define AUDIO_NAME "uda1380" + +/* + * uda1380 register cache + */ +static const u16 uda1380_reg[UDA1380_CACHEREGNUM] = { + 0x0502, 0x0000, 0x0000, 0x3f3f, + 0x0202, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0xff00, 0x0000, 0x4800, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x8000, 0x0002, 0x0000, +}; + +/* + * read uda1380 register cache + */ +static inline unsigned int uda1380_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + if (reg == UDA1380_RESET) + return 0; + if (reg >= UDA1380_CACHEREGNUM) + return -1; + return cache[reg]; +} + +/* + * write uda1380 register cache + */ +static inline void uda1380_write_reg_cache(struct snd_soc_codec *codec, + u16 reg, unsigned int value) +{ + u16 *cache = codec->reg_cache; + if (reg >= UDA1380_CACHEREGNUM) + return; + cache[reg] = value; +} + +/* + * write to the UDA1380 register space + */ +static int uda1380_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[3]; + + /* data is + * data[0] is register offset + * data[1] is MS byte + * data[2] is LS byte + */ + data[0] = reg; + data[1] = (value & 0xff00) >> 8; + data[2] = value & 0x00ff; + + uda1380_write_reg_cache(codec, reg, value); + + /* the interpolator & decimator regs must only be written when the + * codec DAI is active. + */ + if (!codec->active && (reg >= UDA1380_MVOL)) + return 0; + pr_debug("uda1380: hw write %x val %x\n", reg, value); + if (codec->hw_write(codec->control_data, data, 3) == 3) { + unsigned int val; + i2c_master_send(codec->control_data, data, 1); + i2c_master_recv(codec->control_data, data, 2); + val = (data[0]<<8) | data[1]; + if (val != value) { + pr_debug("uda1380: READ BACK VAL %x\n", + (data[0]<<8) | data[1]); + return -EIO; + } + return 0; + } else + return -EIO; +} + +#define uda1380_reset(c) uda1380_write(c, UDA1380_RESET, 0) + +/* declarations of ALSA reg_elem_REAL controls */ +static const char *uda1380_deemp[] = { + "None", + "32kHz", + "44.1kHz", + "48kHz", + "96kHz", +}; +static const char *uda1380_input_sel[] = { + "Line", + "Mic + Line R", + "Line L", + "Mic", +}; +static const char *uda1380_output_sel[] = { + "DAC", + "Analog Mixer", +}; +static const char *uda1380_spf_mode[] = { + "Flat", + "Minimum1", + "Minimum2", + "Maximum" +}; +static const char *uda1380_capture_sel[] = { + "ADC", + "Digital Mixer" +}; +static const char *uda1380_sel_ns[] = { + "3rd-order", + "5th-order" +}; +static const char *uda1380_mix_control[] = { + "off", + "PCM only", + "before sound processing", + "after sound processing" +}; +static const char *uda1380_sdet_setting[] = { + "3200", + "4800", + "9600", + "19200" +}; +static const char *uda1380_os_setting[] = { + "single-speed", + "double-speed (no mixing)", + "quad-speed (no mixing)" +}; + +static const struct soc_enum uda1380_deemp_enum[] = { + SOC_ENUM_SINGLE(UDA1380_DEEMP, 8, 5, uda1380_deemp), + SOC_ENUM_SINGLE(UDA1380_DEEMP, 0, 5, uda1380_deemp), +}; +static const struct soc_enum uda1380_input_sel_enum = + SOC_ENUM_SINGLE(UDA1380_ADC, 2, 4, uda1380_input_sel); /* SEL_MIC, SEL_LNA */ +static const struct soc_enum uda1380_output_sel_enum = + SOC_ENUM_SINGLE(UDA1380_PM, 7, 2, uda1380_output_sel); /* R02_EN_AVC */ +static const struct soc_enum uda1380_spf_enum = + SOC_ENUM_SINGLE(UDA1380_MODE, 14, 4, uda1380_spf_mode); /* M */ +static const struct soc_enum uda1380_capture_sel_enum = + SOC_ENUM_SINGLE(UDA1380_IFACE, 6, 2, uda1380_capture_sel); /* SEL_SOURCE */ +static const struct soc_enum uda1380_sel_ns_enum = + SOC_ENUM_SINGLE(UDA1380_MIXER, 14, 2, uda1380_sel_ns); /* SEL_NS */ +static const struct soc_enum uda1380_mix_enum = + SOC_ENUM_SINGLE(UDA1380_MIXER, 12, 4, uda1380_mix_control); /* MIX, MIX_POS */ +static const struct soc_enum uda1380_sdet_enum = + SOC_ENUM_SINGLE(UDA1380_MIXER, 4, 4, uda1380_sdet_setting); /* SD_VALUE */ +static const struct soc_enum uda1380_os_enum = + SOC_ENUM_SINGLE(UDA1380_MIXER, 0, 3, uda1380_os_setting); /* OS */ + +/* + * from -48 dB in 1.5 dB steps (mute instead of -49.5 dB) + */ +static DECLARE_TLV_DB_SCALE(amix_tlv, -4950, 150, 1); + +/* + * from -78 dB in 1 dB steps (3 dB steps, really. LSB are ignored), + * from -66 dB in 0.5 dB steps (2 dB steps, really) and + * from -52 dB in 0.25 dB steps + */ +static const unsigned int mvol_tlv[] = { + TLV_DB_RANGE_HEAD(3), + 0, 15, TLV_DB_SCALE_ITEM(-8200, 100, 1), + 16, 43, TLV_DB_SCALE_ITEM(-6600, 50, 0), + 44, 252, TLV_DB_SCALE_ITEM(-5200, 25, 0), +}; + +/* + * from -72 dB in 1.5 dB steps (6 dB steps really), + * from -66 dB in 0.75 dB steps (3 dB steps really), + * from -60 dB in 0.5 dB steps (2 dB steps really) and + * from -46 dB in 0.25 dB steps + */ +static const unsigned int vc_tlv[] = { + TLV_DB_RANGE_HEAD(4), + 0, 7, TLV_DB_SCALE_ITEM(-7800, 150, 1), + 8, 15, TLV_DB_SCALE_ITEM(-6600, 75, 0), + 16, 43, TLV_DB_SCALE_ITEM(-6000, 50, 0), + 44, 228, TLV_DB_SCALE_ITEM(-4600, 25, 0), +}; + +/* from 0 to 6 dB in 2 dB steps if SPF mode != flat */ +static DECLARE_TLV_DB_SCALE(tr_tlv, 0, 200, 0); + +/* from 0 to 24 dB in 2 dB steps, if SPF mode == maximum, otherwise cuts + * off at 18 dB max) */ +static DECLARE_TLV_DB_SCALE(bb_tlv, 0, 200, 0); + +/* from -63 to 24 dB in 0.5 dB steps (-128...48) */ +static DECLARE_TLV_DB_SCALE(dec_tlv, -6400, 50, 1); + +/* from 0 to 24 dB in 3 dB steps */ +static DECLARE_TLV_DB_SCALE(pga_tlv, 0, 300, 0); + +/* from 0 to 30 dB in 2 dB steps */ +static DECLARE_TLV_DB_SCALE(vga_tlv, 0, 200, 0); + +static const struct snd_kcontrol_new uda1380_snd_controls[] = { + SOC_DOUBLE_TLV("Analog Mixer Volume", UDA1380_AMIX, 0, 8, 44, 1, amix_tlv), /* AVCR, AVCL */ + SOC_DOUBLE_TLV("Master Playback Volume", UDA1380_MVOL, 0, 8, 252, 1, mvol_tlv), /* MVCL, MVCR */ + SOC_SINGLE_TLV("ADC Playback Volume", UDA1380_MIXVOL, 8, 228, 1, vc_tlv), /* VC2 */ + SOC_SINGLE_TLV("PCM Playback Volume", UDA1380_MIXVOL, 0, 228, 1, vc_tlv), /* VC1 */ + SOC_ENUM("Sound Processing Filter", uda1380_spf_enum), /* M */ + SOC_DOUBLE_TLV("Tone Control - Treble", UDA1380_MODE, 4, 12, 3, 0, tr_tlv), /* TRL, TRR */ + SOC_DOUBLE_TLV("Tone Control - Bass", UDA1380_MODE, 0, 8, 15, 0, bb_tlv), /* BBL, BBR */ +/**/ SOC_SINGLE("Master Playback Switch", UDA1380_DEEMP, 14, 1, 1), /* MTM */ + SOC_SINGLE("ADC Playback Switch", UDA1380_DEEMP, 11, 1, 1), /* MT2 from decimation filter */ + SOC_ENUM("ADC Playback De-emphasis", uda1380_deemp_enum[0]), /* DE2 */ + SOC_SINGLE("PCM Playback Switch", UDA1380_DEEMP, 3, 1, 1), /* MT1, from digital data input */ + SOC_ENUM("PCM Playback De-emphasis", uda1380_deemp_enum[1]), /* DE1 */ + SOC_SINGLE("DAC Polarity inverting Switch", UDA1380_MIXER, 15, 1, 0), /* DA_POL_INV */ + SOC_ENUM("Noise Shaper", uda1380_sel_ns_enum), /* SEL_NS */ + SOC_ENUM("Digital Mixer Signal Control", uda1380_mix_enum), /* MIX_POS, MIX */ + SOC_SINGLE("Silence Switch", UDA1380_MIXER, 7, 1, 0), /* SILENCE, force DAC output to silence */ + SOC_SINGLE("Silence Detector Switch", UDA1380_MIXER, 6, 1, 0), /* SDET_ON */ + SOC_ENUM("Silence Detector Setting", uda1380_sdet_enum), /* SD_VALUE */ + SOC_ENUM("Oversampling Input", uda1380_os_enum), /* OS */ + SOC_DOUBLE_S8_TLV("ADC Capture Volume", UDA1380_DEC, -128, 48, dec_tlv), /* ML_DEC, MR_DEC */ +/**/ SOC_SINGLE("ADC Capture Switch", UDA1380_PGA, 15, 1, 1), /* MT_ADC */ + SOC_DOUBLE_TLV("Line Capture Volume", UDA1380_PGA, 0, 8, 8, 0, pga_tlv), /* PGA_GAINCTRLL, PGA_GAINCTRLR */ + SOC_SINGLE("ADC Polarity inverting Switch", UDA1380_ADC, 12, 1, 0), /* ADCPOL_INV */ + SOC_SINGLE_TLV("Mic Capture Volume", UDA1380_ADC, 8, 15, 0, vga_tlv), /* VGA_CTRL */ + SOC_SINGLE("DC Filter Bypass Switch", UDA1380_ADC, 1, 1, 0), /* SKIP_DCFIL (before decimator) */ + SOC_SINGLE("DC Filter Enable Switch", UDA1380_ADC, 0, 1, 0), /* EN_DCFIL (at output of decimator) */ + SOC_SINGLE("AGC Timing", UDA1380_AGC, 8, 7, 0), /* TODO: enum, see table 62 */ + SOC_SINGLE("AGC Target level", UDA1380_AGC, 2, 3, 1), /* AGC_LEVEL */ + /* -5.5, -8, -11.5, -14 dBFS */ + SOC_SINGLE("AGC Switch", UDA1380_AGC, 0, 1, 0), +}; + +/* add non dapm controls */ +static int uda1380_add_controls(struct snd_soc_codec *codec) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(uda1380_snd_controls); i++) { + err = snd_ctl_add(codec->card, + snd_soc_cnew(&uda1380_snd_controls[i], codec, NULL)); + if (err < 0) + return err; + } + + return 0; +} + +/* Input mux */ +static const struct snd_kcontrol_new uda1380_input_mux_control = + SOC_DAPM_ENUM("Route", uda1380_input_sel_enum); + +/* Output mux */ +static const struct snd_kcontrol_new uda1380_output_mux_control = + SOC_DAPM_ENUM("Route", uda1380_output_sel_enum); + +/* Capture mux */ +static const struct snd_kcontrol_new uda1380_capture_mux_control = + SOC_DAPM_ENUM("Route", uda1380_capture_sel_enum); + + +static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = { + SND_SOC_DAPM_MUX("Input Mux", SND_SOC_NOPM, 0, 0, + &uda1380_input_mux_control), + SND_SOC_DAPM_MUX("Output Mux", SND_SOC_NOPM, 0, 0, + &uda1380_output_mux_control), + SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, + &uda1380_capture_mux_control), + SND_SOC_DAPM_PGA("Left PGA", UDA1380_PM, 3, 0, NULL, 0), + SND_SOC_DAPM_PGA("Right PGA", UDA1380_PM, 1, 0, NULL, 0), + SND_SOC_DAPM_PGA("Mic LNA", UDA1380_PM, 4, 0, NULL, 0), + SND_SOC_DAPM_ADC("Left ADC", "Left Capture", UDA1380_PM, 2, 0), + SND_SOC_DAPM_ADC("Right ADC", "Right Capture", UDA1380_PM, 0, 0), + SND_SOC_DAPM_INPUT("VINM"), + SND_SOC_DAPM_INPUT("VINL"), + SND_SOC_DAPM_INPUT("VINR"), + SND_SOC_DAPM_MIXER("Analog Mixer", UDA1380_PM, 6, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("VOUTLHP"), + SND_SOC_DAPM_OUTPUT("VOUTRHP"), + SND_SOC_DAPM_OUTPUT("VOUTL"), + SND_SOC_DAPM_OUTPUT("VOUTR"), + SND_SOC_DAPM_DAC("DAC", "Playback", UDA1380_PM, 10, 0), + SND_SOC_DAPM_PGA("HeadPhone Driver", UDA1380_PM, 13, 0, NULL, 0), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + + /* output mux */ + {"HeadPhone Driver", NULL, "Output Mux"}, + {"VOUTR", NULL, "Output Mux"}, + {"VOUTL", NULL, "Output Mux"}, + + {"Analog Mixer", NULL, "VINR"}, + {"Analog Mixer", NULL, "VINL"}, + {"Analog Mixer", NULL, "DAC"}, + + {"Output Mux", "DAC", "DAC"}, + {"Output Mux", "Analog Mixer", "Analog Mixer"}, + + /* {"DAC", "Digital Mixer", "I2S" } */ + + /* headphone driver */ + {"VOUTLHP", NULL, "HeadPhone Driver"}, + {"VOUTRHP", NULL, "HeadPhone Driver"}, + + /* input mux */ + {"Left ADC", NULL, "Input Mux"}, + {"Input Mux", "Mic", "Mic LNA"}, + {"Input Mux", "Mic + Line R", "Mic LNA"}, + {"Input Mux", "Line L", "Left PGA"}, + {"Input Mux", "Line", "Left PGA"}, + + /* right input */ + {"Right ADC", "Mic + Line R", "Right PGA"}, + {"Right ADC", "Line", "Right PGA"}, + + /* inputs */ + {"Mic LNA", NULL, "VINM"}, + {"Left PGA", NULL, "VINL"}, + {"Right PGA", NULL, "VINR"}, +}; + +static int uda1380_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, uda1380_dapm_widgets, + ARRAY_SIZE(uda1380_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_new_widgets(codec); + return 0; +} + +static int uda1380_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + int iface; + + /* set up DAI based upon fmt */ + iface = uda1380_read_reg_cache(codec, UDA1380_IFACE); + iface &= ~(R01_SFORI_MASK | R01_SIM | R01_SFORO_MASK); + + /* FIXME: how to select I2S for DATAO and MSB for DATAI correctly? */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= R01_SFORI_I2S | R01_SFORO_I2S; + break; + case SND_SOC_DAIFMT_LSB: + iface |= R01_SFORI_LSB16 | R01_SFORO_I2S; + break; + case SND_SOC_DAIFMT_MSB: + iface |= R01_SFORI_MSB | R01_SFORO_I2S; + } + + if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) == SND_SOC_DAIFMT_CBM_CFM) + iface |= R01_SIM; + + uda1380_write(codec, UDA1380_IFACE, iface); + + return 0; +} + +/* + * Flush reg cache + * We can only write the interpolator and decimator registers + * when the DAI is being clocked by the CPU DAI. It's up to the + * machine and cpu DAI driver to do this before we are called. + */ +static int uda1380_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + int reg, reg_start, reg_end, clk; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + reg_start = UDA1380_MVOL; + reg_end = UDA1380_MIXER; + } else { + reg_start = UDA1380_DEC; + reg_end = UDA1380_AGC; + } + + /* FIXME disable DAC_CLK */ + clk = uda1380_read_reg_cache(codec, UDA1380_CLK); + uda1380_write(codec, UDA1380_CLK, clk & ~R00_DAC_CLK); + + for (reg = reg_start; reg <= reg_end; reg++) { + pr_debug("uda1380: flush reg %x val %x:", reg, + uda1380_read_reg_cache(codec, reg)); + uda1380_write(codec, reg, uda1380_read_reg_cache(codec, reg)); + } + + /* FIXME enable DAC_CLK */ + uda1380_write(codec, UDA1380_CLK, clk | R00_DAC_CLK); + + return 0; +} + +static int uda1380_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + u16 clk = uda1380_read_reg_cache(codec, UDA1380_CLK); + + /* set WSPLL power and divider if running from this clock */ + if (clk & R00_DAC_CLK) { + int rate = params_rate(params); + u16 pm = uda1380_read_reg_cache(codec, UDA1380_PM); + clk &= ~0x3; /* clear SEL_LOOP_DIV */ + switch (rate) { + case 6250 ... 12500: + clk |= 0x0; + break; + case 12501 ... 25000: + clk |= 0x1; + break; + case 25001 ... 50000: + clk |= 0x2; + break; + case 50001 ... 100000: + clk |= 0x3; + break; + } + uda1380_write(codec, UDA1380_PM, R02_PON_PLL | pm); + } + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + clk |= R00_EN_DAC | R00_EN_INT; + else + clk |= R00_EN_ADC | R00_EN_DEC; + + uda1380_write(codec, UDA1380_CLK, clk); + return 0; +} + +static void uda1380_pcm_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + u16 clk = uda1380_read_reg_cache(codec, UDA1380_CLK); + + /* shut down WSPLL power if running from this clock */ + if (clk & R00_DAC_CLK) { + u16 pm = uda1380_read_reg_cache(codec, UDA1380_PM); + uda1380_write(codec, UDA1380_PM, ~R02_PON_PLL & pm); + } + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + clk &= ~(R00_EN_DAC | R00_EN_INT); + else + clk &= ~(R00_EN_ADC | R00_EN_DEC); + + uda1380_write(codec, UDA1380_CLK, clk); +} + +static int uda1380_mute(struct snd_soc_codec_dai *codec_dai, int mute) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 mute_reg = uda1380_read_reg_cache(codec, UDA1380_DEEMP) & ~R13_MTM; + + /* FIXME: mute(codec,0) is called when the magician clock is already + * set to WSPLL, but for some unknown reason writing to interpolator + * registers works only when clocked by SYSCLK */ + u16 clk = uda1380_read_reg_cache(codec, UDA1380_CLK); + uda1380_write(codec, UDA1380_CLK, ~R00_DAC_CLK & clk); + if (mute) + uda1380_write(codec, UDA1380_DEEMP, mute_reg | R13_MTM); + else + uda1380_write(codec, UDA1380_DEEMP, mute_reg); + uda1380_write(codec, UDA1380_CLK, clk); + return 0; +} + +static int uda1380_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + int pm = uda1380_read_reg_cache(codec, UDA1380_PM); + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + uda1380_write(codec, UDA1380_PM, R02_PON_BIAS | pm); + break; + case SND_SOC_BIAS_STANDBY: + uda1380_write(codec, UDA1380_PM, R02_PON_BIAS); + break; + case SND_SOC_BIAS_OFF: + uda1380_write(codec, UDA1380_PM, 0x0); + break; + } + codec->bias_level = level; + return 0; +} + +#define UDA1380_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) + +struct snd_soc_codec_dai uda1380_dai[] = { +{ + .name = "UDA1380", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = UDA1380_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = UDA1380_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE,}, + .ops = { + .hw_params = uda1380_pcm_hw_params, + .shutdown = uda1380_pcm_shutdown, + .prepare = uda1380_pcm_prepare, + }, + .dai_ops = { + .digital_mute = uda1380_mute, + .set_fmt = uda1380_set_dai_fmt, + }, +}, +{ /* playback only - dual interface */ + .name = "UDA1380", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = UDA1380_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .ops = { + .hw_params = uda1380_pcm_hw_params, + .shutdown = uda1380_pcm_shutdown, + .prepare = uda1380_pcm_prepare, + }, + .dai_ops = { + .digital_mute = uda1380_mute, + .set_fmt = uda1380_set_dai_fmt, + }, +}, +{ /* capture only - dual interface*/ + .name = "UDA1380", + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = UDA1380_RATES, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + }, + .ops = { + .hw_params = uda1380_pcm_hw_params, + .shutdown = uda1380_pcm_shutdown, + .prepare = uda1380_pcm_prepare, + }, + .dai_ops = { + .set_fmt = uda1380_set_dai_fmt, + }, +}, +}; +EXPORT_SYMBOL_GPL(uda1380_dai); + +static int uda1380_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + uda1380_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int uda1380_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + int i; + u8 data[2]; + u16 *cache = codec->reg_cache; + + /* Sync reg_cache with the hardware */ + for (i = 0; i < ARRAY_SIZE(uda1380_reg); i++) { + data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001); + data[1] = cache[i] & 0x00ff; + codec->hw_write(codec->control_data, data, 2); + } + uda1380_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + uda1380_set_bias_level(codec, codec->suspend_bias_level); + return 0; +} + +/* + * initialise the UDA1380 driver + * register mixer and dsp interfaces with the kernel + */ +static int uda1380_init(struct snd_soc_device *socdev, int dac_clk) +{ + struct snd_soc_codec *codec = socdev->codec; + int ret = 0; + + codec->name = "UDA1380"; + codec->owner = THIS_MODULE; + codec->read = uda1380_read_reg_cache; + codec->write = uda1380_write; + codec->set_bias_level = uda1380_set_bias_level; + codec->dai = uda1380_dai; + codec->num_dai = ARRAY_SIZE(uda1380_dai); + codec->reg_cache = kmemdup(uda1380_reg, sizeof(uda1380_reg), + GFP_KERNEL); + if (codec->reg_cache == NULL) + return -ENOMEM; + codec->reg_cache_size = sizeof(uda1380_reg); + codec->reg_cache_step = 2; + uda1380_reset(codec); + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + pr_err("uda1380: failed to create pcms\n"); + goto pcm_err; + } + + /* power on device */ + uda1380_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + /* set clock input */ + switch (dac_clk) { + case UDA1380_DAC_CLK_SYSCLK: + uda1380_write(codec, UDA1380_CLK, 0); + break; + case UDA1380_DAC_CLK_WSPLL: + uda1380_write(codec, UDA1380_CLK, R00_DAC_CLK); + break; + } + + /* uda1380 init */ + uda1380_add_controls(codec); + uda1380_add_widgets(codec); + ret = snd_soc_register_card(socdev); + if (ret < 0) { + pr_err("uda1380: failed to register card\n"); + goto card_err; + } + + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + kfree(codec->reg_cache); + return ret; +} + +static struct snd_soc_device *uda1380_socdev; + +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + +#define I2C_DRIVERID_UDA1380 0xfefe /* liam - need a proper id */ + +static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; + +/* Magic definition of all other variables and things */ +I2C_CLIENT_INSMOD; + +static struct i2c_driver uda1380_i2c_driver; +static struct i2c_client client_template; + +/* If the i2c layer weren't so broken, we could pass this kind of data + around */ + +static int uda1380_codec_probe(struct i2c_adapter *adap, int addr, int kind) +{ + struct snd_soc_device *socdev = uda1380_socdev; + struct uda1380_setup_data *setup = socdev->codec_data; + struct snd_soc_codec *codec = socdev->codec; + struct i2c_client *i2c; + int ret; + + if (addr != setup->i2c_address) + return -ENODEV; + + client_template.adapter = adap; + client_template.addr = addr; + + i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); + if (i2c == NULL) { + kfree(codec); + return -ENOMEM; + } + i2c_set_clientdata(i2c, codec); + codec->control_data = i2c; + + ret = i2c_attach_client(i2c); + if (ret < 0) { + pr_err("uda1380: failed to attach codec at addr %x\n", addr); + goto err; + } + + ret = uda1380_init(socdev, setup->dac_clk); + if (ret < 0) { + pr_err("uda1380: failed to initialise UDA1380\n"); + goto err; + } + return ret; + +err: + kfree(codec); + kfree(i2c); + return ret; +} + +static int uda1380_i2c_detach(struct i2c_client *client) +{ + struct snd_soc_codec *codec = i2c_get_clientdata(client); + i2c_detach_client(client); + kfree(codec->reg_cache); + kfree(client); + return 0; +} + +static int uda1380_i2c_attach(struct i2c_adapter *adap) +{ + return i2c_probe(adap, &addr_data, uda1380_codec_probe); +} + +static struct i2c_driver uda1380_i2c_driver = { + .driver = { + .name = "UDA1380 I2C Codec", + .owner = THIS_MODULE, + }, + .id = I2C_DRIVERID_UDA1380, + .attach_adapter = uda1380_i2c_attach, + .detach_client = uda1380_i2c_detach, + .command = NULL, +}; + +static struct i2c_client client_template = { + .name = "UDA1380", + .driver = &uda1380_i2c_driver, +}; +#endif + +static int uda1380_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct uda1380_setup_data *setup; + struct snd_soc_codec *codec; + int ret = 0; + + pr_info("UDA1380 Audio Codec %s", UDA1380_VERSION); + + setup = socdev->codec_data; + codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (codec == NULL) + return -ENOMEM; + + socdev->codec = codec; + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + uda1380_socdev = socdev; +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + if (setup->i2c_address) { + normal_i2c[0] = setup->i2c_address; + codec->hw_write = (hw_write_t)i2c_master_send; + ret = i2c_add_driver(&uda1380_i2c_driver); + if (ret != 0) + printk(KERN_ERR "can't add i2c driver"); + } +#else + /* Add other interfaces here */ +#endif + return ret; +} + +/* power down chip */ +static int uda1380_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + if (codec->control_data) + uda1380_set_bias_level(codec, SND_SOC_BIAS_OFF); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_del_driver(&uda1380_i2c_driver); +#endif + kfree(codec); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_uda1380 = { + .probe = uda1380_probe, + .remove = uda1380_remove, + .suspend = uda1380_suspend, + .resume = uda1380_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_uda1380); + +MODULE_AUTHOR("Giorgio Padrin"); +MODULE_DESCRIPTION("Audio support for codec Philips UDA1380"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/uda1380.h b/sound/soc/codecs/uda1380.h new file mode 100644 index 000000000000..f9d885c8bf01 --- /dev/null +++ b/sound/soc/codecs/uda1380.h @@ -0,0 +1,89 @@ +/* + * Audio support for Philips UDA1380 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Copyright (c) 2005 Giorgio Padrin + */ + +#ifndef _UDA1380_H +#define _UDA1380_H + +#define UDA1380_CLK 0x00 +#define UDA1380_IFACE 0x01 +#define UDA1380_PM 0x02 +#define UDA1380_AMIX 0x03 +#define UDA1380_HP 0x04 +#define UDA1380_MVOL 0x10 +#define UDA1380_MIXVOL 0x11 +#define UDA1380_MODE 0x12 +#define UDA1380_DEEMP 0x13 +#define UDA1380_MIXER 0x14 +#define UDA1380_INTSTAT 0x18 +#define UDA1380_DEC 0x20 +#define UDA1380_PGA 0x21 +#define UDA1380_ADC 0x22 +#define UDA1380_AGC 0x23 +#define UDA1380_DECSTAT 0x28 +#define UDA1380_RESET 0x7f + +#define UDA1380_CACHEREGNUM 0x24 + +/* Register flags */ +#define R00_EN_ADC 0x0800 +#define R00_EN_DEC 0x0400 +#define R00_EN_DAC 0x0200 +#define R00_EN_INT 0x0100 +#define R00_DAC_CLK 0x0010 +#define R01_SFORI_I2S 0x0000 +#define R01_SFORI_LSB16 0x0100 +#define R01_SFORI_LSB18 0x0200 +#define R01_SFORI_LSB20 0x0300 +#define R01_SFORI_MSB 0x0500 +#define R01_SFORI_MASK 0x0700 +#define R01_SFORO_I2S 0x0000 +#define R01_SFORO_LSB16 0x0001 +#define R01_SFORO_LSB18 0x0002 +#define R01_SFORO_LSB20 0x0003 +#define R01_SFORO_LSB24 0x0004 +#define R01_SFORO_MSB 0x0005 +#define R01_SFORO_MASK 0x0007 +#define R01_SEL_SOURCE 0x0040 +#define R01_SIM 0x0010 +#define R02_PON_PLL 0x8000 +#define R02_PON_HP 0x2000 +#define R02_PON_DAC 0x0400 +#define R02_PON_BIAS 0x0100 +#define R02_EN_AVC 0x0080 +#define R02_PON_AVC 0x0040 +#define R02_PON_LNA 0x0010 +#define R02_PON_PGAL 0x0008 +#define R02_PON_ADCL 0x0004 +#define R02_PON_PGAR 0x0002 +#define R02_PON_ADCR 0x0001 +#define R13_MTM 0x4000 +#define R14_SILENCE 0x0080 +#define R14_SDET_ON 0x0040 +#define R21_MT_ADC 0x8000 +#define R22_SEL_LNA 0x0008 +#define R22_SEL_MIC 0x0004 +#define R22_SKIP_DCFIL 0x0002 +#define R23_AGC_EN 0x0001 + +struct uda1380_setup_data { + unsigned short i2c_address; + int dac_clk; +#define UDA1380_DAC_CLK_SYSCLK 0 +#define UDA1380_DAC_CLK_WSPLL 1 +}; + +#define UDA1380_DAI_DUPLEX 0 /* playback and capture on single DAI */ +#define UDA1380_DAI_PLAYBACK 1 /* playback DAI */ +#define UDA1380_DAI_CAPTURE 2 /* capture DAI */ + +extern struct snd_soc_codec_dai uda1380_dai[3]; +extern struct snd_soc_codec_device soc_codec_dev_uda1380; + +#endif /* _UDA1380_H */ -- cgit v1.2.3 From 0261ac5f2f43a1906cfacfb19d62ed643d162cbe Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 29 May 2008 09:31:50 +0200 Subject: xen: fix "xen: implement save/restore" -tip testing found the following build breakage: drivers/built-in.o: In function `xen_suspend': manage.c:(.text+0x4390f): undefined reference to `xen_console_resume' with this config: http://redhat.com/~mingo/misc/config-Thu_May_29_09_23_16_CEST_2008.bad i have bisected it down to: | commit 0e91398f2a5d4eb6b07df8115917d0d1cf3e9b58 | Author: Jeremy Fitzhardinge | Date: Mon May 26 23:31:27 2008 +0100 | | xen: implement save/restore the problem is that drivers/xen/manage.c is built unconditionally if CONFIG_XEN is enabled and makes use of xen_suspend(), but drivers/char/hvc_xen.c, where the xen_suspend() method is implemented, is only build if CONFIG_HVC_XEN=y as well. i have solved this by providing a NOP implementation for xen_suspend() in the !CONFIG_HVC_XEN case. Signed-off-by: Ingo Molnar --- include/xen/hvc-console.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/xen/hvc-console.h b/include/xen/hvc-console.h index fd5483a059bb..98b79bc404dd 100644 --- a/include/xen/hvc-console.h +++ b/include/xen/hvc-console.h @@ -3,7 +3,11 @@ extern struct console xenboot_console; +#ifdef CONFIG_HVC_XEN void xen_console_resume(void); +#else +static inline void xen_console_resume(void) { } +#endif void xen_raw_console_write(const char *str); void xen_raw_printk(const char *fmt, ...); -- cgit v1.2.3 From b786af117b360843349cf66165c4efa0217ca2a7 Mon Sep 17 00:00:00 2001 From: Stephen Neuendorffer Date: Wed, 7 May 2008 04:29:17 +1000 Subject: [POWERPC] Refactor DCR code Previously, DCR support was configured at compile time to either use MMIO or native dcr instructions. Although this works for most platforms, it fails on FPGA platforms: 1) Systems may include more than one DCR bus. 2) Systems may be native DCR capable and still use memory mapped DCR interface. This patch provides runtime support based on the device trees for the case where CONFIG_PPC_DCR_MMIO and CONFIG_PPC_DCR_NATIVE are both selected. Previously, this was a poorly defined configuration, which happened to provide NATIVE support. The runtime selection is made based on the dcr-controller having a 'dcr-access-method' attribute in the device tree. If only one of the above options is selected, then the code uses #defines to select only the used code in order to avoid introducing overhead in existing usage. Signed-off-by: Stephen Neuendorffer Signed-off-by: Josh Boyer --- arch/powerpc/sysdev/dcr.c | 154 ++++++++++++++++++++++++++++++-------- include/asm-powerpc/dcr-generic.h | 49 ++++++++++++ include/asm-powerpc/dcr-mmio.h | 20 +++-- include/asm-powerpc/dcr-native.h | 16 ++-- include/asm-powerpc/dcr.h | 39 +++++++++- 5 files changed, 231 insertions(+), 47 deletions(-) create mode 100644 include/asm-powerpc/dcr-generic.h diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c index 437e48d3ae33..5f39a79b0660 100644 --- a/arch/powerpc/sysdev/dcr.c +++ b/arch/powerpc/sysdev/dcr.c @@ -23,6 +23,105 @@ #include #include +static struct device_node *find_dcr_parent(struct device_node *node) +{ + struct device_node *par, *tmp; + const u32 *p; + + for (par = of_node_get(node); par;) { + if (of_get_property(par, "dcr-controller", NULL)) + break; + p = of_get_property(par, "dcr-parent", NULL); + tmp = par; + if (p == NULL) + par = of_get_parent(par); + else + par = of_find_node_by_phandle(*p); + of_node_put(tmp); + } + return par; +} + +#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) + +bool dcr_map_ok_generic(dcr_host_t host) +{ + if (host.type == DCR_HOST_NATIVE) + return dcr_map_ok_native(host.host.native); + else if (host.type == DCR_HOST_MMIO) + return dcr_map_ok_mmio(host.host.mmio); + else + return 0; +} +EXPORT_SYMBOL_GPL(dcr_map_ok_generic); + +dcr_host_t dcr_map_generic(struct device_node *dev, + unsigned int dcr_n, + unsigned int dcr_c) +{ + dcr_host_t host; + struct device_node *dp; + const char *prop; + + host.type = DCR_HOST_INVALID; + + dp = find_dcr_parent(dev); + if (dp == NULL) + return host; + + prop = of_get_property(dp, "dcr-access-method", NULL); + + pr_debug("dcr_map_generic(dcr-access-method = %s)\n", prop); + + if (!strcmp(prop, "native")) { + host.type = DCR_HOST_NATIVE; + host.host.native = dcr_map_native(dev, dcr_n, dcr_c); + } else if (!strcmp(prop, "mmio")) { + host.type = DCR_HOST_MMIO; + host.host.mmio = dcr_map_mmio(dev, dcr_n, dcr_c); + } + + of_node_put(dp); + return host; +} +EXPORT_SYMBOL_GPL(dcr_map_generic); + +void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c) +{ + if (host.type == DCR_HOST_NATIVE) + dcr_unmap_native(host.host.native, dcr_c); + else if (host.type == DCR_HOST_MMIO) + dcr_unmap_mmio(host.host.mmio, dcr_c); + else /* host.type == DCR_HOST_INVALID */ + WARN_ON(true); +} +EXPORT_SYMBOL_GPL(dcr_unmap_generic); + +u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n) +{ + if (host.type == DCR_HOST_NATIVE) + return dcr_read_native(host.host.native, dcr_n); + else if (host.type == DCR_HOST_MMIO) + return dcr_read_mmio(host.host.mmio, dcr_n); + else /* host.type == DCR_HOST_INVALID */ + WARN_ON(true); + return 0; +} +EXPORT_SYMBOL_GPL(dcr_read_generic); + +void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value) +{ + if (host.type == DCR_HOST_NATIVE) + dcr_write_native(host.host.native, dcr_n, value); + else if (host.type == DCR_HOST_MMIO) + dcr_write_mmio(host.host.mmio, dcr_n, value); + else /* host.type == DCR_HOST_INVALID */ + WARN_ON(true); +} +EXPORT_SYMBOL_GPL(dcr_write_generic); + +#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */ + unsigned int dcr_resource_start(struct device_node *np, unsigned int index) { unsigned int ds; @@ -47,26 +146,7 @@ unsigned int dcr_resource_len(struct device_node *np, unsigned int index) } EXPORT_SYMBOL_GPL(dcr_resource_len); -#ifndef CONFIG_PPC_DCR_NATIVE - -static struct device_node * find_dcr_parent(struct device_node * node) -{ - struct device_node *par, *tmp; - const u32 *p; - - for (par = of_node_get(node); par;) { - if (of_get_property(par, "dcr-controller", NULL)) - break; - p = of_get_property(par, "dcr-parent", NULL); - tmp = par; - if (p == NULL) - par = of_get_parent(par); - else - par = of_find_node_by_phandle(*p); - of_node_put(tmp); - } - return par; -} +#ifdef CONFIG_PPC_DCR_MMIO u64 of_translate_dcr_address(struct device_node *dev, unsigned int dcr_n, @@ -75,7 +155,7 @@ u64 of_translate_dcr_address(struct device_node *dev, struct device_node *dp; const u32 *p; unsigned int stride; - u64 ret; + u64 ret = OF_BAD_ADDR; dp = find_dcr_parent(dev); if (dp == NULL) @@ -90,7 +170,7 @@ u64 of_translate_dcr_address(struct device_node *dev, if (p == NULL) p = of_get_property(dp, "dcr-mmio-space", NULL); if (p == NULL) - return OF_BAD_ADDR; + goto done; /* Maybe could do some better range checking here */ ret = of_translate_address(dp, p); @@ -98,21 +178,25 @@ u64 of_translate_dcr_address(struct device_node *dev, ret += (u64)(stride) * (u64)dcr_n; if (out_stride) *out_stride = stride; + + done: + of_node_put(dp); return ret; } -dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n, - unsigned int dcr_c) +dcr_host_mmio_t dcr_map_mmio(struct device_node *dev, + unsigned int dcr_n, + unsigned int dcr_c) { - dcr_host_t ret = { .token = NULL, .stride = 0, .base = dcr_n }; + dcr_host_mmio_t ret = { .token = NULL, .stride = 0, .base = dcr_n }; u64 addr; pr_debug("dcr_map(%s, 0x%x, 0x%x)\n", dev->full_name, dcr_n, dcr_c); addr = of_translate_dcr_address(dev, dcr_n, &ret.stride); - pr_debug("translates to addr: 0x%lx, stride: 0x%x\n", - addr, ret.stride); + pr_debug("translates to addr: 0x%llx, stride: 0x%x\n", + (unsigned long long) addr, ret.stride); if (addr == OF_BAD_ADDR) return ret; pr_debug("mapping 0x%x bytes\n", dcr_c * ret.stride); @@ -124,11 +208,11 @@ dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n, ret.token -= dcr_n * ret.stride; return ret; } -EXPORT_SYMBOL_GPL(dcr_map); +EXPORT_SYMBOL_GPL(dcr_map_mmio); -void dcr_unmap(dcr_host_t host, unsigned int dcr_c) +void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c) { - dcr_host_t h = host; + dcr_host_mmio_t h = host; if (h.token == NULL) return; @@ -136,7 +220,11 @@ void dcr_unmap(dcr_host_t host, unsigned int dcr_c) iounmap(h.token); h.token = NULL; } -EXPORT_SYMBOL_GPL(dcr_unmap); -#else /* defined(CONFIG_PPC_DCR_NATIVE) */ +EXPORT_SYMBOL_GPL(dcr_unmap_mmio); + +#endif /* defined(CONFIG_PPC_DCR_MMIO) */ + +#ifdef CONFIG_PPC_DCR_NATIVE DEFINE_SPINLOCK(dcr_ind_lock); -#endif /* !defined(CONFIG_PPC_DCR_NATIVE) */ +#endif /* defined(CONFIG_PPC_DCR_NATIVE) */ + diff --git a/include/asm-powerpc/dcr-generic.h b/include/asm-powerpc/dcr-generic.h new file mode 100644 index 000000000000..35b71599ec46 --- /dev/null +++ b/include/asm-powerpc/dcr-generic.h @@ -0,0 +1,49 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_GENERIC_H +#define _ASM_POWERPC_DCR_GENERIC_H +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID}; + +typedef struct { + enum host_type_t type; + union { + dcr_host_mmio_t mmio; + dcr_host_native_t native; + } host; +} dcr_host_t; + +extern bool dcr_map_ok_generic(dcr_host_t host); + +extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n, + unsigned int dcr_c); +extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c); + +extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n); + +extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value); + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_GENERIC_H */ + + diff --git a/include/asm-powerpc/dcr-mmio.h b/include/asm-powerpc/dcr-mmio.h index 08532ff1899c..acd491dbd45a 100644 --- a/include/asm-powerpc/dcr-mmio.h +++ b/include/asm-powerpc/dcr-mmio.h @@ -27,20 +27,26 @@ typedef struct { void __iomem *token; unsigned int stride; unsigned int base; -} dcr_host_t; +} dcr_host_mmio_t; -#define DCR_MAP_OK(host) ((host).token != NULL) +static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host) +{ + return host.token != NULL; +} -extern dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n, - unsigned int dcr_c); -extern void dcr_unmap(dcr_host_t host, unsigned int dcr_c); +extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev, + unsigned int dcr_n, + unsigned int dcr_c); +extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c); -static inline u32 dcr_read(dcr_host_t host, unsigned int dcr_n) +static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n) { return in_be32(host.token + ((host.base + dcr_n) * host.stride)); } -static inline void dcr_write(dcr_host_t host, unsigned int dcr_n, u32 value) +static inline void dcr_write_mmio(dcr_host_mmio_t host, + unsigned int dcr_n, + u32 value) { out_be32(host.token + ((host.base + dcr_n) * host.stride), value); } diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h index f8398ce80372..72d2b72c7390 100644 --- a/include/asm-powerpc/dcr-native.h +++ b/include/asm-powerpc/dcr-native.h @@ -26,14 +26,18 @@ typedef struct { unsigned int base; -} dcr_host_t; +} dcr_host_native_t; -#define DCR_MAP_OK(host) (1) +static inline bool dcr_map_ok_native(dcr_host_native_t host) +{ + return 1; +} -#define dcr_map(dev, dcr_n, dcr_c) ((dcr_host_t){ .base = (dcr_n) }) -#define dcr_unmap(host, dcr_c) do {} while (0) -#define dcr_read(host, dcr_n) mfdcr(dcr_n + host.base) -#define dcr_write(host, dcr_n, value) mtdcr(dcr_n + host.base, value) +#define dcr_map_native(dev, dcr_n, dcr_c) \ + ((dcr_host_native_t){ .base = (dcr_n) }) +#define dcr_unmap_native(host, dcr_c) do {} while (0) +#define dcr_read_native(host, dcr_n) mfdcr(dcr_n + host.base) +#define dcr_write_native(host, dcr_n, value) mtdcr(dcr_n + host.base, value) /* Device Control Registers */ void __mtdcr(int reg, unsigned int val); diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h index 9338d50538f1..53b283050ab3 100644 --- a/include/asm-powerpc/dcr.h +++ b/include/asm-powerpc/dcr.h @@ -20,14 +20,50 @@ #ifndef _ASM_POWERPC_DCR_H #define _ASM_POWERPC_DCR_H #ifdef __KERNEL__ +#ifndef __ASSEMBLY__ #ifdef CONFIG_PPC_DCR #ifdef CONFIG_PPC_DCR_NATIVE #include -#else +#endif + +#ifdef CONFIG_PPC_DCR_MMIO #include #endif + +/* Indirection layer for providing both NATIVE and MMIO support. */ + +#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) + +#include + +#define DCR_MAP_OK(host) dcr_map_ok_generic(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value) + +#else + +#ifdef CONFIG_PPC_DCR_NATIVE +typedef dcr_host_native_t dcr_host_t; +#define DCR_MAP_OK(host) dcr_map_ok_native(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value) +#else +typedef dcr_host_mmio_t dcr_host_t; +#define DCR_MAP_OK(host) dcr_map_ok_mmio(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value) +#endif + +#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */ + /* * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR * base from the device-tree @@ -41,5 +77,6 @@ extern unsigned int dcr_resource_len(struct device_node *np, #endif /* CONFIG_PPC_MERGE */ #endif /* CONFIG_PPC_DCR */ +#endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_DCR_H */ -- cgit v1.2.3 From 71f349799b34c8b6ce3df42126b4de6cfa16456d Mon Sep 17 00:00:00 2001 From: David Gibson Date: Thu, 15 May 2008 16:46:39 +1000 Subject: [POWERPC] Convert remaining dts-v0 files to v1 At the moment we have a mixture of left-over version 0 and new-format version 1 files in arch/powerpc/boot/dts. This is potentially confusing to people new to the dts format attempting to figure it out. So, this patch converts all the as-yet unconverted dts v0 files and converts them to v1. They're mechanically-converted, and not hand tweaked so in some cases they're not 100% in keeping with usual v1 style, but the convertor program does have some heuristics so the discrepancies aren't too bad. I have checked that this patch produces no changes to the resulting dtb binaries. Signed-off-by: David Gibson Acked-by: Josh Boyer Acked-by: Geoff Levand Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/bamboo.dts | 142 +++++++++--------- arch/powerpc/boot/dts/canyonlands.dts | 222 ++++++++++++++-------------- arch/powerpc/boot/dts/ebony.dts | 164 ++++++++++----------- arch/powerpc/boot/dts/ep405.dts | 100 ++++++------- arch/powerpc/boot/dts/glacier.dts | 262 +++++++++++++++++----------------- arch/powerpc/boot/dts/haleakala.dts | 136 +++++++++--------- arch/powerpc/boot/dts/holly.dts | 122 ++++++++-------- arch/powerpc/boot/dts/katmai.dts | 210 +++++++++++++-------------- arch/powerpc/boot/dts/kilauea.dts | 182 +++++++++++------------ arch/powerpc/boot/dts/makalu.dts | 182 +++++++++++------------ arch/powerpc/boot/dts/ps3.dts | 16 ++- arch/powerpc/boot/dts/rainier.dts | 162 ++++++++++----------- arch/powerpc/boot/dts/sequoia.dts | 172 +++++++++++----------- arch/powerpc/boot/dts/taishan.dts | 212 +++++++++++++-------------- arch/powerpc/boot/dts/walnut.dts | 118 +++++++-------- arch/powerpc/boot/dts/warp.dts | 106 +++++++------- arch/powerpc/boot/dts/yosemite.dts | 146 +++++++++---------- 17 files changed, 1344 insertions(+), 1310 deletions(-) diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts index ba2521bdaab1..6ce0cc2c0208 100644 --- a/arch/powerpc/boot/dts/bamboo.dts +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -11,12 +11,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,bamboo"; compatible = "amcc,bamboo"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -34,13 +36,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440EP"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -48,14 +50,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440ep","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -65,22 +67,22 @@ compatible = "ibm,uic-440ep","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440ep"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-440ep"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -92,29 +94,29 @@ SDRAM0: sdram { compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; DMA0: dma { compatible = "ibm,dma-440ep", "ibm,dma-440gp"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <4>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; + interrupt-map = ; }; POB0: opb { @@ -124,101 +126,101 @@ /* Bamboo is oddball in the 44x world and doesn't use the ERPN * bits. */ - ranges = <00000000 0 00000000 80000000 - 80000000 0 80000000 80000000>; + ranges = <0x00000000 0x00000000 0x00000000 0x80000000 + 0x80000000 0x00000000 0x80000000 0x80000000>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; }; UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; + current-speed = <115200>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@ef600500 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; UART3: serial@ef600600 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <4 4>; + interrupts = <0x4 0x4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; - reg = ; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; - reg = ; + reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; - reg = ; + reg = <0xef600d00 0x0000000c>; }; EMAC0: ethernet@ef600e00 { device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = ; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0 1>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <0>; }; @@ -227,26 +229,26 @@ device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1e 4 1f 4>; - reg = ; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0xef600f00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <2 3>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <1>; }; usb@ef601000 { compatible = "ohci-be"; - reg = ; - interrupts = <8 1 9 1>; + reg = <0xef601000 0x00000080>; + interrupts = <0x8 0x1 0x9 0x1>; interrupt-parent = < &UIC1 >; }; }; @@ -258,35 +260,35 @@ #address-cells = <3>; compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; primary; - reg = <0 eec00000 8 /* Config space access */ - 0 eed00000 4 /* IACK */ - 0 eed00000 4 /* Special cycle */ - 0 ef400000 40>; /* Internal registers */ + reg = <0x00000000 0xeec00000 0x00000008 /* Config space access */ + 0x00000000 0xeed00000 0x00000004 /* IACK */ + 0x00000000 0xeed00000 0x00000004 /* Special cycle */ + 0x00000000 0xef400000 0x00000040>; /* Internal registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed. Chip supports a second * IO range but we don't use it for now */ - ranges = <02000000 0 a0000000 0 a0000000 0 20000000 - 01000000 0 00000000 0 e8000000 0 00010000>; + ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* Bamboo has all 4 IRQ pins tied together per slot */ - interrupt-map-mask = ; + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; interrupt-map = < /* IDSEL 1 */ - 0800 0 0 0 &UIC0 1c 8 + 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 /* IDSEL 2 */ - 1000 0 0 0 &UIC0 1b 8 + 0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8 /* IDSEL 3 */ - 1800 0 0 0 &UIC0 1a 8 + 0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8 /* IDSEL 4 */ - 2000 0 0 0 &UIC0 19 8 + 0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8 >; }; }; diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 39634124929b..f9fe03252150 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -8,12 +8,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,canyonlands"; compatible = "amcc,canyonlands"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -29,13 +31,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,460EX"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by U-Boot */ timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -43,14 +45,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by U-Boot */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-460ex","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -60,11 +62,11 @@ compatible = "ibm,uic-460ex","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -72,11 +74,11 @@ compatible = "ibm,uic-460ex","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = ; /* cascade */ + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -84,22 +86,22 @@ compatible = "ibm,uic-460ex","ibm,uic"; interrupt-controller; cell-index = <3>; - dcr-reg = <0f0 009>; + dcr-reg = <0x0f0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <10 4 11 4>; /* cascade */ + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-460ex"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-460ex"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -111,74 +113,74 @@ SDRAM0: sdram { compatible = "ibm,sdram-460ex", "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL0: mcmal { compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; - num-rx-chans = <10>; + num-rx-chans = <16>; #address-cells = <0>; #size-cells = <0>; interrupt-parent = <&UIC2>; - interrupts = < /*TXEOB*/ 6 4 - /*RXEOB*/ 7 4 - /*SERR*/ 3 4 - /*TXDE*/ 4 4 - /*RXDE*/ 5 4>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; }; POB0: opb { compatible = "ibm,opb-460ex", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = ; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; clock-frequency = <0>; /* Filled in by U-Boot */ EBC0: ebc { compatible = "ibm,ebc-460ex", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by U-Boot */ /* ranges property is supplied by U-Boot */ - interrupts = <6 4>; + interrupts = <0x6 0x4>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl512n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0 1e0000>; + reg = <0x00000000 0x001e0000>; }; partition@1e0000 { label = "dtb"; - reg = <1e0000 20000>; + reg = <0x001e0000 0x00020000>; }; partition@200000 { label = "ramdisk"; - reg = <200000 1400000>; + reg = <0x00200000 0x01400000>; }; partition@1600000 { label = "jffs2"; - reg = <1600000 400000>; + reg = <0x01600000 0x00400000>; }; partition@1a00000 { label = "user"; - reg = <1a00000 2560000>; + reg = <0x01a00000 0x02560000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; }; @@ -186,103 +188,103 @@ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@ef600500 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <1d 4>; + interrupts = <0x1d 0x4>; }; UART3: serial@ef600600 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <1e 4>; + interrupts = <0x1e 0x4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-460ex", "ibm,iic"; - reg = ; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-460ex", "ibm,iic"; - reg = ; + reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-460ex", "ibm,zmii"; - reg = ; + reg = <0xef600d00 0x0000000c>; }; RGMII0: emac-rgmii@ef601500 { compatible = "ibm,rgmii-460ex", "ibm,rgmii"; - reg = ; + reg = <0xef601500 0x00000008>; has-mdio; }; TAH0: emac-tah@ef601350 { compatible = "ibm,tah-460ex", "ibm,tah"; - reg = ; + reg = <0xef601350 0x00000030>; }; TAH1: emac-tah@ef601450 { compatible = "ibm,tah-460ex", "ibm,tah"; - reg = ; + reg = <0xef601450 0x00000030>; }; EMAC0: ethernet@ef600e00 { device_type = "network"; compatible = "ibm,emac-460ex", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; tah-device = <&TAH0>; @@ -295,23 +297,23 @@ device_type = "network"; compatible = "ibm,emac-460ex", "ibm,emac4"; interrupt-parent = <&EMAC1>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef600f00 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <8>; cell-index = <1>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; tah-device = <&TAH1>; @@ -331,27 +333,27 @@ primary; large-inbound-windows; enable-msi-hole; - reg = ; /* Internal messaging registers */ + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 - 01000000 0 00000000 0000000c 08000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0 to 0x3f */ - bus-range = <0 3f>; + bus-range = <0x0 0x3f>; /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ - interrupt-map-mask = <0000 0 0 0>; - interrupt-map = < 0000 0 0 0 &UIC1 0 8 >; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >; }; PCIE0: pciex@d00000000 { @@ -361,23 +363,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; primary; - port = <0>; /* port number */ - reg = ; /* Registers */ - dcr-reg = <100 020>; - sdr-base = <300>; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 - 01000000 0 00000000 0000000f 80000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 40 to 0x7f */ - bus-range = <40 7f>; + bus-range = <0x40 0x7f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -387,12 +389,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 c 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 d 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 e 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; }; PCIE1: pciex@d20000000 { @@ -402,23 +404,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; primary; - port = <1>; /* port number */ - reg = ; /* Registers */ - dcr-reg = <120 020>; - sdr-base = <340>; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x08011000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 - 01000000 0 00000000 0000000f 80010000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 80 to 0xbf */ - bus-range = <80 bf>; + bus-range = <0x80 0xbf>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -428,12 +430,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 10 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 11 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 12 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>; }; }; }; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index 5079dc890e0e..ec2d142291b4 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -11,12 +11,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "ibm,ebony"; compatible = "ibm,ebony"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -32,13 +34,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440GP"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; // Filled in by zImage timebase-frequency = <0>; // Filled in by zImage - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; /* 32 kB */ - d-cache-size = <8000>; /* 32 kB */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; /* 32 kB */ + d-cache-size = <32768>; /* 32 kB */ dcr-controller; dcr-access-method = "native"; }; @@ -46,14 +48,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; // Filled in by zImage + reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440gp", "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -64,17 +66,17 @@ compatible = "ibm,uic-440gp", "ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; CPC0: cpc { compatible = "ibm,cpc-440gp"; - dcr-reg = <0b0 003 0e0 010>; + dcr-reg = <0x0b0 0x003 0x0e0 0x010>; // FIXME: anything else? }; @@ -87,37 +89,37 @@ SDRAM0: memory-controller { compatible = "ibm,sdram-440gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; // FIXME: anything else? }; SRAM0: sram { compatible = "ibm,sram-440gp"; - dcr-reg = <020 8 00a 1>; + dcr-reg = <0x020 0x008 0x00a 0x001>; }; DMA0: dma { // FIXME: ??? compatible = "ibm,dma-440gp"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440gp", "ibm,mcmal"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <4>; num-rx-chans = <4>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - interrupt-map-mask = ; + interrupt-map = ; + interrupt-map-mask = <0xffffffff>; }; POB0: opb { @@ -126,34 +128,34 @@ #size-cells = <1>; /* Wish there was a nicer way of specifying a full 32-bit range */ - ranges = <00000000 1 00000000 80000000 - 80000000 1 80000000 80000000>; - dcr-reg = <090 00b>; + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + dcr-reg = <0x090 0x00b>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; clock-frequency = <0>; // Filled in by zImage EBC0: ebc { compatible = "ibm,ebc-440gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; // Filled in by zImage // ranges property is supplied by zImage // based on firmware's configuration of the // EBC bridge - interrupts = <5 4>; + interrupts = <0x5 0x4>; interrupt-parent = <&UIC1>; small-flash@0,80000 { compatible = "jedec-flash"; bank-width = <1>; - reg = <0 80000 80000>; + reg = <0x00000000 0x00080000 0x00080000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "OpenBIOS"; - reg = <0 80000>; + reg = <0x00000000 0x00080000>; read-only; }; }; @@ -161,101 +163,101 @@ nvram@1,0 { /* NVRAM & RTC */ compatible = "ds1743-nvram"; - #bytes = <2000>; - reg = <1 0 2000>; + #bytes = <0x2000>; + reg = <0x00000001 0x00000000 0x00002000>; }; large-flash@2,0 { compatible = "jedec-flash"; bank-width = <1>; - reg = <2 0 400000>; + reg = <0x00000002 0x00000000 0x00400000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "fs"; - reg = <0 380000>; + reg = <0x00000000 0x00380000>; }; partition@380000 { label = "firmware"; - reg = <380000 80000>; + reg = <0x00380000 0x00080000>; }; }; ir@3,0 { - reg = <3 0 10>; + reg = <0x00000003 0x00000000 0x00000010>; }; fpga@7,0 { compatible = "Ebony-FPGA"; - reg = <7 0 10>; - virtual-reg = ; + reg = <0x00000007 0x00000000 0x00000010>; + virtual-reg = <0xe8300000>; }; }; UART0: serial@40000200 { device_type = "serial"; compatible = "ns16550"; - reg = <40000200 8>; - virtual-reg = ; - clock-frequency = ; - current-speed = <2580>; + reg = <0x40000200 0x00000008>; + virtual-reg = <0xe0000200>; + clock-frequency = <11059200>; + current-speed = <9600>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@40000300 { device_type = "serial"; compatible = "ns16550"; - reg = <40000300 8>; - virtual-reg = ; - clock-frequency = ; - current-speed = <2580>; + reg = <0x40000300 0x00000008>; + virtual-reg = <0xe0000300>; + clock-frequency = <11059200>; + current-speed = <9600>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC0: i2c@40000400 { /* FIXME */ compatible = "ibm,iic-440gp", "ibm,iic"; - reg = <40000400 14>; + reg = <0x40000400 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@40000500 { /* FIXME */ compatible = "ibm,iic-440gp", "ibm,iic"; - reg = <40000500 14>; + reg = <0x40000500 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; GPIO0: gpio@40000700 { /* FIXME */ compatible = "ibm,gpio-440gp"; - reg = <40000700 20>; + reg = <0x40000700 0x00000020>; }; ZMII0: emac-zmii@40000780 { compatible = "ibm,zmii-440gp", "ibm,zmii"; - reg = <40000780 c>; + reg = <0x40000780 0x0000000c>; }; EMAC0: ethernet@40000800 { device_type = "network"; compatible = "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = <40000800 70>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0x40000800 0x00000070>; local-mac-address = [000000000000]; // Filled in by zImage mal-device = <&MAL0>; mal-tx-channel = <0 1>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000001>; + phy-map = <0x00000001>; zmii-device = <&ZMII0>; zmii-channel = <0>; }; @@ -263,18 +265,18 @@ device_type = "network"; compatible = "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1e 4 1f 4>; - reg = <40000900 70>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0x40000900 0x00000070>; local-mac-address = [000000000000]; // Filled in by zImage mal-device = <&MAL0>; mal-tx-channel = <2 3>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000001>; + phy-map = <0x00000001>; zmii-device = <&ZMII0>; zmii-channel = <1>; }; @@ -282,9 +284,9 @@ GPT0: gpt@40000a00 { /* FIXME */ - reg = <40000a00 d4>; + reg = <0x40000a00 0x000000d4>; interrupt-parent = <&UIC0>; - interrupts = <12 4 13 4 14 4 15 4 16 4>; + interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>; }; }; @@ -296,35 +298,35 @@ #address-cells = <3>; compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix"; primary; - reg = <2 0ec00000 8 /* Config space access */ - 0 0 0 /* no IACK cycles */ - 2 0ed00000 4 /* Special cycles */ - 2 0ec80000 f0 /* Internal registers */ - 2 0ec80100 fc>; /* Internal messaging registers */ + reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x00000002 0x0ed00000 0x00000004 /* Special cycles */ + 0x00000002 0x0ec80000 0x000000f0 /* Internal registers */ + 0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 00000003 80000000 0 80000000 - 01000000 0 00000000 00000002 08000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* Ebony has all 4 IRQ pins tied together per slot */ - interrupt-map-mask = ; + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; interrupt-map = < /* IDSEL 1 */ - 0800 0 0 0 &UIC0 17 8 + 0x800 0x0 0x0 0x0 &UIC0 0x17 0x8 /* IDSEL 2 */ - 1000 0 0 0 &UIC0 18 8 + 0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8 /* IDSEL 3 */ - 1800 0 0 0 &UIC0 19 8 + 0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8 /* IDSEL 4 */ - 2000 0 0 0 &UIC0 1a 8 + 0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8 >; }; }; diff --git a/arch/powerpc/boot/dts/ep405.dts b/arch/powerpc/boot/dts/ep405.dts index 92938557ac8a..53ef06cc2134 100644 --- a/arch/powerpc/boot/dts/ep405.dts +++ b/arch/powerpc/boot/dts/ep405.dts @@ -9,12 +9,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <1>; #size-cells = <1>; model = "ep405"; compatible = "ep405"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC; @@ -29,13 +31,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,405GP"; - reg = <0>; - clock-frequency = ; /* Filled in by zImage */ + reg = <0x00000000>; + clock-frequency = <200000000>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <4000>; - d-cache-size = <4000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; + d-cache-size = <16384>; dcr-controller; dcr-access-method = "native"; }; @@ -43,14 +45,14 @@ memory { device_type = "memory"; - reg = <0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller { compatible = "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 9>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -65,91 +67,91 @@ SDRAM0: memory-controller { compatible = "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL: mcmal { compatible = "ibm,mcmal-405gp", "ibm,mcmal"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <1>; num-rx-chans = <1>; interrupt-parent = <&UIC0>; interrupts = < - b 4 /* TXEOB */ - c 4 /* RXEOB */ - a 4 /* SERR */ - d 4 /* TXDE */ - e 4 /* RXDE */>; + 0xb 0x4 /* TXEOB */ + 0xc 0x4 /* RXEOB */ + 0xa 0x4 /* SERR */ + 0xd 0x4 /* TXDE */ + 0xe 0x4 /* RXDE */>; }; POB0: opb { compatible = "ibm,opb-405gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = ; - dcr-reg = <0a0 5>; + ranges = <0xef600000 0xef600000 0x00a00000>; + dcr-reg = <0x0a0 0x005>; clock-frequency = <0>; /* Filled in by zImage */ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <2580>; + current-speed = <9600>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <2580>; + current-speed = <9600>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC: i2c@ef600500 { compatible = "ibm,iic-405gp", "ibm,iic"; - reg = ; + reg = <0xef600500 0x00000011>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; GPIO: gpio@ef600700 { compatible = "ibm,gpio-405gp"; - reg = ; + reg = <0xef600700 0x00000020>; }; EMAC: ethernet@ef600800 { - linux,network-index = <0>; + linux,network-index = <0x0>; device_type = "network"; compatible = "ibm,emac-405gp", "ibm,emac"; interrupt-parent = <&UIC0>; interrupts = < - f 4 /* Ethernet */ - 9 4 /* Ethernet Wake Up */>; + 0xf 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; local-mac-address = [000000000000]; /* Filled in by zImage */ - reg = ; + reg = <0xef600800 0x00000070>; mal-device = <&MAL>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; }; }; EBC0: ebc { compatible = "ibm,ebc-405gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; @@ -163,13 +165,13 @@ /* NVRAM and RTC */ nvrtc@4,200000 { compatible = "ds1742"; - reg = <4 200000 0>; /* size fixed up by zImage */ + reg = <0x00000004 0x00200000 0x00000000>; /* size fixed up by zImage */ }; /* "BCSR" CPLD contains a PCI irq controller */ bcsr@4,0 { compatible = "ep405-bcsr"; - reg = <4 0 10>; + reg = <0x00000004 0x00000000 0x00000010>; interrupt-controller; /* Routing table */ irq-routing = [ 00 /* SYSERR */ @@ -198,26 +200,26 @@ #address-cells = <3>; compatible = "ibm,plb405gp-pci", "ibm,plb-pci"; primary; - reg = ; /* Internal registers */ + reg = <0xeec00000 0x00000008 /* Config space access */ + 0xeed80000 0x00000004 /* IACK */ + 0xeed80000 0x00000004 /* Special cycle */ + 0xef480000 0x00000040>; /* Internal registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed. Chip supports a second * IO range but we don't use it for now */ - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e8000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* That's all I know about IRQs on that thing ... */ - interrupt-map-mask = ; + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; interrupt-map = < /* USB */ - 7000 0 0 0 &UIC0 1e 8 /* IRQ5 */ + 0x7000 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IRQ5 */ >; }; }; diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts index 0f2fc077d8db..463650c5f61d 100644 --- a/arch/powerpc/boot/dts/glacier.dts +++ b/arch/powerpc/boot/dts/glacier.dts @@ -8,12 +8,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,glacier"; compatible = "amcc,glacier", "amcc,canyonlands"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -31,13 +33,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,460GT"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by U-Boot */ timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -45,14 +47,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by U-Boot */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-460gt","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -62,11 +64,11 @@ compatible = "ibm,uic-460gt","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -74,11 +76,11 @@ compatible = "ibm,uic-460gt","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = ; /* cascade */ + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -86,22 +88,22 @@ compatible = "ibm,uic-460gt","ibm,uic"; interrupt-controller; cell-index = <3>; - dcr-reg = <0f0 009>; + dcr-reg = <0x0f0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <10 4 11 4>; /* cascade */ + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-460gt"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-460gt"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -113,75 +115,75 @@ SDRAM0: sdram { compatible = "ibm,sdram-460gt", "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL0: mcmal { compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <4>; - num-rx-chans = <20>; + num-rx-chans = <32>; #address-cells = <0>; #size-cells = <0>; interrupt-parent = <&UIC2>; - interrupts = < /*TXEOB*/ 6 4 - /*RXEOB*/ 7 4 - /*SERR*/ 3 4 - /*TXDE*/ 4 4 - /*RXDE*/ 5 4>; - desc-base-addr-high = <8>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; + desc-base-addr-high = <0x8>; }; POB0: opb { compatible = "ibm,opb-460gt", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = ; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; clock-frequency = <0>; /* Filled in by U-Boot */ EBC0: ebc { compatible = "ibm,ebc-460gt", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by U-Boot */ /* ranges property is supplied by U-Boot */ - interrupts = <6 4>; + interrupts = <0x6 0x4>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl512n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0 1e0000>; + reg = <0x00000000 0x001e0000>; }; partition@1e0000 { label = "dtb"; - reg = <1e0000 20000>; + reg = <0x001e0000 0x00020000>; }; partition@200000 { label = "ramdisk"; - reg = <200000 1400000>; + reg = <0x00200000 0x01400000>; }; partition@1600000 { label = "jffs2"; - reg = <1600000 400000>; + reg = <0x01600000 0x00400000>; }; partition@1a00000 { label = "user"; - reg = <1a00000 2560000>; + reg = <0x01a00000 0x02560000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; }; @@ -189,109 +191,109 @@ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@ef600500 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <1d 4>; + interrupts = <0x1d 0x4>; }; UART3: serial@ef600600 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; /* Filled in by U-Boot */ interrupt-parent = <&UIC1>; - interrupts = <1e 4>; + interrupts = <0x1e 0x4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-460gt", "ibm,iic"; - reg = ; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-460gt", "ibm,iic"; - reg = ; + reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-460gt", "ibm,zmii"; - reg = ; + reg = <0xef600d00 0x0000000c>; }; RGMII0: emac-rgmii@ef601500 { compatible = "ibm,rgmii-460gt", "ibm,rgmii"; - reg = ; + reg = <0xef601500 0x00000008>; has-mdio; }; RGMII1: emac-rgmii@ef601600 { compatible = "ibm,rgmii-460gt", "ibm,rgmii"; - reg = ; + reg = <0xef601600 0x00000008>; has-mdio; }; TAH0: emac-tah@ef601350 { compatible = "ibm,tah-460gt", "ibm,tah"; - reg = ; + reg = <0xef601350 0x00000030>; }; TAH1: emac-tah@ef601450 { compatible = "ibm,tah-460gt", "ibm,tah"; - reg = ; + reg = <0xef601450 0x00000030>; }; EMAC0: ethernet@ef600e00 { device_type = "network"; compatible = "ibm,emac-460gt", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; tah-device = <&TAH0>; @@ -304,23 +306,23 @@ device_type = "network"; compatible = "ibm,emac-460gt", "ibm,emac4"; interrupt-parent = <&EMAC1>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef600f00 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <8>; cell-index = <1>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; tah-device = <&TAH1>; @@ -334,23 +336,23 @@ device_type = "network"; compatible = "ibm,emac-460gt", "ibm,emac4"; interrupt-parent = <&EMAC2>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef601100 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <2>; - mal-rx-channel = <10>; + mal-rx-channel = <16>; cell-index = <2>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII1>; rgmii-channel = <0>; has-inverted-stacr-oc; @@ -362,23 +364,23 @@ device_type = "network"; compatible = "ibm,emac-460gt", "ibm,emac4"; interrupt-parent = <&EMAC3>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef601200 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <3>; - mal-rx-channel = <18>; + mal-rx-channel = <24>; cell-index = <3>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII1>; rgmii-channel = <1>; has-inverted-stacr-oc; @@ -396,27 +398,27 @@ primary; large-inbound-windows; enable-msi-hole; - reg = ; /* Internal messaging registers */ + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 - 01000000 0 00000000 0000000c 08000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0 to 0x3f */ - bus-range = <0 3f>; + bus-range = <0x0 0x3f>; /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ - interrupt-map-mask = <0000 0 0 0>; - interrupt-map = < 0000 0 0 0 &UIC1 0 8 >; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >; }; PCIE0: pciex@d00000000 { @@ -426,23 +428,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; primary; - port = <0>; /* port number */ - reg = ; /* Registers */ - dcr-reg = <100 020>; - sdr-base = <300>; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 - 01000000 0 00000000 0000000f 80000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 40 to 0x7f */ - bus-range = <40 7f>; + bus-range = <0x40 0x7f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -452,12 +454,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 c 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 d 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 e 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; }; PCIE1: pciex@d20000000 { @@ -467,23 +469,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; primary; - port = <1>; /* port number */ - reg = ; /* Registers */ - dcr-reg = <120 020>; - sdr-base = <340>; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x08011000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 - 01000000 0 00000000 0000000f 80010000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 80 to 0xbf */ - bus-range = <80 bf>; + bus-range = <0x80 0xbf>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -493,12 +495,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 10 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 11 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 12 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>; }; }; }; diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts index b5d95ac24dbf..2c2fceaabbcd 100644 --- a/arch/powerpc/boot/dts/haleakala.dts +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -8,12 +8,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <1>; #size-cells = <1>; model = "amcc,haleakala"; compatible = "amcc,haleakala", "amcc,kilauea"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -28,13 +30,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,405EXr"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by U-Boot */ timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <4000>; /* 16 kB */ - d-cache-size = <4000>; /* 16 kB */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ dcr-controller; dcr-access-method = "native"; }; @@ -42,14 +44,14 @@ memory { device_type = "memory"; - reg = <0 0>; /* Filled in by U-Boot */ + reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ }; UIC0: interrupt-controller { compatible = "ibm,uic-405exr", "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -59,11 +61,11 @@ compatible = "ibm,uic-405exr","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -71,11 +73,11 @@ compatible = "ibm,uic-405exr","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1c 4 1d 4>; /* cascade */ + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -88,72 +90,72 @@ SDRAM0: memory-controller { compatible = "ibm,sdram-405exr"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL0: mcmal { compatible = "ibm,mcmal-405exr", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - interrupt-map-mask = ; + interrupt-map = ; + interrupt-map-mask = <0xffffffff>; }; POB0: opb { compatible = "ibm,opb-405exr", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <80000000 80000000 10000000 - ef600000 ef600000 a00000 - f0000000 f0000000 10000000>; - dcr-reg = <0a0 5>; + ranges = <0x80000000 0x80000000 0x10000000 + 0xef600000 0xef600000 0x00a00000 + 0xf0000000 0xf0000000 0x10000000>; + dcr-reg = <0x0a0 0x005>; clock-frequency = <0>; /* Filled in by U-Boot */ EBC0: ebc { compatible = "ibm,ebc-405exr", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by U-Boot */ /* ranges property is supplied by U-Boot */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl512n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0 200000>; + reg = <0x00000000 0x00200000>; }; partition@200000 { label = "root"; - reg = <200000 200000>; + reg = <0x00200000 0x00200000>; }; partition@400000 { label = "user"; - reg = <400000 3b60000>; + reg = <0x00400000 0x03b60000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; }; @@ -161,68 +163,68 @@ UART0: serial@ef600200 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1a 4>; + interrupts = <0x1a 0x4>; }; UART1: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC0: i2c@ef600400 { compatible = "ibm,iic-405exr", "ibm,iic"; - reg = ; + reg = <0xef600400 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600500 { compatible = "ibm,iic-405exr", "ibm,iic"; - reg = ; + reg = <0xef600500 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; RGMII0: emac-rgmii@ef600b00 { compatible = "ibm,rgmii-405exr", "ibm,rgmii"; - reg = ; + reg = <0xef600b00 0x00000104>; has-mdio; }; EMAC0: ethernet@ef600900 { - linux,network-index = <0>; + linux,network-index = <0x0>; device_type = "network"; compatible = "ibm,emac-405exr", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef600900 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; has-inverted-stacr-oc; @@ -237,23 +239,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; - port = <0>; /* port number */ - reg = ; /* Registers */ - dcr-reg = <040 020>; - sdr-base = <400>; + port = <0x0>; /* port number */ + reg = <0xa0000000 0x20000000 /* Config space access */ + 0xef000000 0x00001000>; /* Registers */ + dcr-reg = <0x040 0x020>; + sdr-base = <0x400>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 90000000 0 08000000 - 01000000 0 00000000 e0000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0x00 to 0x3f */ - bus-range = <00 3f>; + bus-range = <0x0 0x3f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -263,12 +265,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC2 0 4 /* swizzled int A */ - 0000 0 0 2 &UIC2 1 4 /* swizzled int B */ - 0000 0 0 3 &UIC2 2 4 /* swizzled int C */ - 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; }; }; }; diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts index b5d87895fe06..f87fe7b9ced9 100644 --- a/arch/powerpc/boot/dts/holly.dts +++ b/arch/powerpc/boot/dts/holly.dts @@ -10,6 +10,8 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { model = "41K7339"; compatible = "ibm,holly"; @@ -21,22 +23,22 @@ #size-cells =<0>; PowerPC,750CL@0 { device_type = "cpu"; - reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <8000>; - i-cache-size = <8000>; - d-cache-sets = <80>; - i-cache-sets = <80>; - timebase-frequency = <2faf080>; - clock-frequency = <23c34600>; - bus-frequency = ; + reg = <0x00000000>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + d-cache-sets = <128>; + i-cache-sets = <128>; + timebase-frequency = <50000000>; + clock-frequency = <600000000>; + bus-frequency = <200000000>; }; }; memory@0 { device_type = "memory"; - reg = <00000000 20000000>; + reg = <0x00000000 0x20000000>; }; tsi109@c0000000 { @@ -44,33 +46,33 @@ compatible = "tsi109-bridge", "tsi108-bridge"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 c0000000 00010000>; - reg = ; + ranges = <0x00000000 0xc0000000 0x00010000>; + reg = <0xc0000000 0x00010000>; i2c@7000 { device_type = "i2c"; compatible = "tsi109-i2c", "tsi108-i2c"; interrupt-parent = <&MPIC>; - interrupts = ; - reg = <7000 400>; + interrupts = <0xe 0x2>; + reg = <0x00007000 0x00000400>; }; MDIO: mdio@6000 { device_type = "mdio"; compatible = "tsi109-mdio", "tsi108-mdio"; - reg = <6000 50>; + reg = <0x00006000 0x00000050>; #address-cells = <1>; #size-cells = <0>; PHY1: ethernet-phy@1 { compatible = "bcm5461a"; - reg = <1>; + reg = <0x00000001>; txc-rxc-delay-disable; }; PHY2: ethernet-phy@2 { compatible = "bcm5461a"; - reg = <2>; + reg = <0x00000002>; txc-rxc-delay-disable; }; }; @@ -80,10 +82,10 @@ compatible = "tsi109-ethernet", "tsi108-ethernet"; #address-cells = <1>; #size-cells = <0>; - reg = <6000 200>; + reg = <0x00006000 0x00000200>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupt-parent = <&MPIC>; - interrupts = <10 2>; + interrupts = <0x10 0x2>; mdio-handle = <&MDIO>; phy-handle = <&PHY1>; }; @@ -93,10 +95,10 @@ compatible = "tsi109-ethernet", "tsi108-ethernet"; #address-cells = <1>; #size-cells = <0>; - reg = <6400 200>; + reg = <0x00006400 0x00000200>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupt-parent = <&MPIC>; - interrupts = <11 2>; + interrupts = <0x11 0x2>; mdio-handle = <&MDIO>; phy-handle = <&PHY2>; }; @@ -104,23 +106,23 @@ serial@7808 { device_type = "serial"; compatible = "ns16550"; - reg = <7808 200>; - virtual-reg = ; - clock-frequency = <3F9C6000>; - current-speed = <1c200>; + reg = <0x00007808 0x00000200>; + virtual-reg = <0xc0007808>; + clock-frequency = <1067212800>; + current-speed = <115200>; interrupt-parent = <&MPIC>; - interrupts = ; + interrupts = <0xc 0x2>; }; serial@7c08 { device_type = "serial"; compatible = "ns16550"; - reg = <7c08 200>; - virtual-reg = ; - clock-frequency = <3F9C6000>; - current-speed = <1c200>; + reg = <0x00007c08 0x00000200>; + virtual-reg = <0xc0007c08>; + clock-frequency = <1067212800>; + current-speed = <115200>; interrupt-parent = <&MPIC>; - interrupts = ; + interrupts = <0xd 0x2>; }; MPIC: pic@7400 { @@ -128,7 +130,7 @@ compatible = "chrp,open-pic"; interrupt-controller; #interrupt-cells = <2>; - reg = <7400 400>; + reg = <0x00007400 0x00000400>; big-endian; }; @@ -138,42 +140,42 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <1000 1000>; - bus-range = <0 0>; + reg = <0x00001000 0x00001000>; + bus-range = <0x0 0x0>; /*----------------------------------------------------+ | PCI memory range. | 01 denotes I/O space | 02 denotes 32-bit memory space +----------------------------------------------------*/ - ranges = <02000000 0 40000000 40000000 0 10000000 - 01000000 0 00000000 7e000000 0 00010000>; - clock-frequency = <7f28154>; + ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000 + 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>; + clock-frequency = <133333332>; interrupt-parent = <&MPIC>; - interrupts = <17 2>; - interrupt-map-mask = ; + interrupts = <0x17 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; /*----------------------------------------------------+ | The INTA, INTB, INTC, INTD are shared. +----------------------------------------------------*/ interrupt-map = < - 0800 0 0 1 &RT0 24 0 - 0800 0 0 2 &RT0 25 0 - 0800 0 0 3 &RT0 26 0 - 0800 0 0 4 &RT0 27 0 - - 1000 0 0 1 &RT0 25 0 - 1000 0 0 2 &RT0 26 0 - 1000 0 0 3 &RT0 27 0 - 1000 0 0 4 &RT0 24 0 - - 1800 0 0 1 &RT0 26 0 - 1800 0 0 2 &RT0 27 0 - 1800 0 0 3 &RT0 24 0 - 1800 0 0 4 &RT0 25 0 - - 2000 0 0 1 &RT0 27 0 - 2000 0 0 2 &RT0 24 0 - 2000 0 0 3 &RT0 25 0 - 2000 0 0 4 &RT0 26 0 + 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 + 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 + 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 + 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 + + 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 + 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 + 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 + 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 + + 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 + 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 + 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 + 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 + + 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 + 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 + 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 + 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 >; RT0: router@1180 { @@ -183,7 +185,7 @@ clock-frequency = <0>; #address-cells = <0>; #interrupt-cells = <2>; - interrupts = <17 2>; + interrupts = <0x17 0x2>; interrupt-parent = <&MPIC>; }; }; diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index cc2873a531d2..b94bf61b9bcc 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -12,12 +12,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,katmai"; compatible = "amcc,katmai"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -33,13 +35,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440SPe"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -47,14 +49,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440spe","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -64,11 +66,11 @@ compatible = "ibm,uic-440spe","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -76,11 +78,11 @@ compatible = "ibm,uic-440spe","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = ; /* cascade */ + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -88,22 +90,22 @@ compatible = "ibm,uic-440spe","ibm,uic"; interrupt-controller; cell-index = <3>; - dcr-reg = <0f0 009>; + dcr-reg = <0x0f0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <10 4 11 4>; /* cascade */ + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440spe"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-440spe"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -115,108 +117,108 @@ SDRAM0: sdram { compatible = "ibm,sdram-440spe", "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL0: mcmal { compatible = "ibm,mcmal-440spe", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; num-rx-chans = <1>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; + interrupt-map = ; }; POB0: opb { compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 4 e0000000 20000000>; + ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; }; UART0: serial@10000200 { device_type = "serial"; compatible = "ns16550"; - reg = <10000200 8>; - virtual-reg = ; + reg = <0x10000200 0x00000008>; + virtual-reg = <0xa0000200>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; + current-speed = <115200>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@10000300 { device_type = "serial"; compatible = "ns16550"; - reg = <10000300 8>; - virtual-reg = ; + reg = <0x10000300 0x00000008>; + virtual-reg = <0xa0000300>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@10000600 { device_type = "serial"; compatible = "ns16550"; - reg = <10000600 8>; - virtual-reg = ; + reg = <0x10000600 0x00000008>; + virtual-reg = <0xa0000600>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC1>; - interrupts = <5 4>; + interrupts = <0x5 0x4>; }; IIC0: i2c@10000400 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; - reg = <10000400 14>; + reg = <0x10000400 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@10000500 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; - reg = <10000500 14>; + reg = <0x10000500 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; EMAC0: ethernet@10000800 { - linux,network-index = <0>; + linux,network-index = <0x0>; device_type = "network"; compatible = "ibm,emac-440spe", "ibm,emac4"; interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = <10000800 70>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0x10000800 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "gmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; has-inverted-stacr-oc; has-new-stacr-staopc; }; @@ -231,23 +233,23 @@ primary; large-inbound-windows; enable-msi-hole; - reg = ; /* Internal messaging registers */ + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 - 01000000 0 00000000 0000000c 08000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0 to 0xf */ - bus-range = <0 f>; + bus-range = <0x0 0xf>; /* * On Katmai, the following PCI-X interrupts signals @@ -258,13 +260,13 @@ * INTC: J2: 1-2 * INTD: J1: 1-2 */ - interrupt-map-mask = ; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 1 */ - 0800 0 0 1 &UIC1 14 8 - 0800 0 0 2 &UIC1 13 8 - 0800 0 0 3 &UIC1 12 8 - 0800 0 0 4 &UIC1 11 8 + 0x800 0x0 0x0 0x1 &UIC1 0x14 0x8 + 0x800 0x0 0x0 0x2 &UIC1 0x13 0x8 + 0x800 0x0 0x0 0x3 &UIC1 0x12 0x8 + 0x800 0x0 0x0 0x4 &UIC1 0x11 0x8 >; }; @@ -275,23 +277,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; primary; - port = <0>; /* port number */ - reg = ; /* Registers */ - dcr-reg = <100 020>; - sdr-base = <300>; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x10000000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 - 01000000 0 00000000 0000000f 80000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 10 to 0x1f */ - bus-range = <10 1f>; + bus-range = <0x10 0x1f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -301,12 +303,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 0 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 1 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 2 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 3 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; }; PCIE1: pciex@d20000000 { @@ -316,23 +318,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; primary; - port = <1>; /* port number */ - reg = ; /* Registers */ - dcr-reg = <120 020>; - sdr-base = <340>; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x10001000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 - 01000000 0 00000000 0000000f 80010000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 10 to 0x1f */ - bus-range = <20 2f>; + bus-range = <0x20 0x2f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -342,12 +344,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 4 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 5 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 6 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 7 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; }; PCIE2: pciex@d40000000 { @@ -357,23 +359,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; primary; - port = <2>; /* port number */ - reg = ; /* Registers */ - dcr-reg = <140 020>; - sdr-base = <370>; + port = <0x2>; /* port number */ + reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */ + 0x0000000c 0x10002000 0x00001000>; /* Registers */ + dcr-reg = <0x140 0x020>; + sdr-base = <0x370>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 0000000f 00000000 0 80000000 - 01000000 0 00000000 0000000f 80020000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 10 to 0x1f */ - bus-range = <30 3f>; + bus-range = <0x30 0x3f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -383,12 +385,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC3 8 4 /* swizzled int A */ - 0000 0 0 2 &UIC3 9 4 /* swizzled int B */ - 0000 0 0 3 &UIC3 a 4 /* swizzled int C */ - 0000 0 0 4 &UIC3 b 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; }; }; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 48c9a6e71f1a..3ed6a8fee1d5 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -8,12 +8,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <1>; #size-cells = <1>; model = "amcc,kilauea"; compatible = "amcc,kilauea"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -29,13 +31,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,405EX"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by U-Boot */ timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <4000>; /* 16 kB */ - d-cache-size = <4000>; /* 16 kB */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ dcr-controller; dcr-access-method = "native"; }; @@ -43,14 +45,14 @@ memory { device_type = "memory"; - reg = <0 0>; /* Filled in by U-Boot */ + reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ }; UIC0: interrupt-controller { compatible = "ibm,uic-405ex", "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -60,11 +62,11 @@ compatible = "ibm,uic-405ex","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -72,11 +74,11 @@ compatible = "ibm,uic-405ex","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1c 4 1d 4>; /* cascade */ + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -89,72 +91,72 @@ SDRAM0: memory-controller { compatible = "ibm,sdram-405ex"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL0: mcmal { compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - interrupt-map-mask = ; + interrupt-map = ; + interrupt-map-mask = <0xffffffff>; }; POB0: opb { compatible = "ibm,opb-405ex", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <80000000 80000000 10000000 - ef600000 ef600000 a00000 - f0000000 f0000000 10000000>; - dcr-reg = <0a0 5>; + ranges = <0x80000000 0x80000000 0x10000000 + 0xef600000 0xef600000 0x00a00000 + 0xf0000000 0xf0000000 0x10000000>; + dcr-reg = <0x0a0 0x005>; clock-frequency = <0>; /* Filled in by U-Boot */ EBC0: ebc { compatible = "ibm,ebc-405ex", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by U-Boot */ /* ranges property is supplied by U-Boot */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl512n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0 200000>; + reg = <0x00000000 0x00200000>; }; partition@200000 { label = "root"; - reg = <200000 200000>; + reg = <0x00200000 0x00200000>; }; partition@400000 { label = "user"; - reg = <400000 3b60000>; + reg = <0x00400000 0x03b60000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; }; @@ -162,68 +164,68 @@ UART0: serial@ef600200 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1a 4>; + interrupts = <0x1a 0x4>; }; UART1: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC0: i2c@ef600400 { compatible = "ibm,iic-405ex", "ibm,iic"; - reg = ; + reg = <0xef600400 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600500 { compatible = "ibm,iic-405ex", "ibm,iic"; - reg = ; + reg = <0xef600500 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; RGMII0: emac-rgmii@ef600b00 { compatible = "ibm,rgmii-405ex", "ibm,rgmii"; - reg = ; + reg = <0xef600b00 0x00000104>; has-mdio; }; EMAC0: ethernet@ef600900 { - linux,network-index = <0>; + linux,network-index = <0x0>; device_type = "network"; compatible = "ibm,emac-405ex", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef600900 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; has-inverted-stacr-oc; @@ -231,27 +233,27 @@ }; EMAC1: ethernet@ef600a00 { - linux,network-index = <1>; + linux,network-index = <0x1>; device_type = "network"; compatible = "ibm,emac-405ex", "ibm,emac4"; interrupt-parent = <&EMAC1>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef600a00 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; has-inverted-stacr-oc; @@ -266,23 +268,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; - port = <0>; /* port number */ - reg = ; /* Registers */ - dcr-reg = <040 020>; - sdr-base = <400>; + port = <0x0>; /* port number */ + reg = <0xa0000000 0x20000000 /* Config space access */ + 0xef000000 0x00001000>; /* Registers */ + dcr-reg = <0x040 0x020>; + sdr-base = <0x400>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 90000000 0 08000000 - 01000000 0 00000000 e0000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0x00 to 0x3f */ - bus-range = <00 3f>; + bus-range = <0x0 0x3f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -292,12 +294,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC2 0 4 /* swizzled int A */ - 0000 0 0 2 &UIC2 1 4 /* swizzled int B */ - 0000 0 0 3 &UIC2 2 4 /* swizzled int C */ - 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; }; PCIE1: pciex@0c0000000 { @@ -307,23 +309,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; - port = <1>; /* port number */ - reg = ; /* Registers */ - dcr-reg = <060 020>; - sdr-base = <440>; + port = <0x1>; /* port number */ + reg = <0xc0000000 0x20000000 /* Config space access */ + 0xef001000 0x00001000>; /* Registers */ + dcr-reg = <0x060 0x020>; + sdr-base = <0x440>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 98000000 0 08000000 - 01000000 0 00000000 e0010000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0x40 to 0x7f */ - bus-range = <40 7f>; + bus-range = <0x40 0x7f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -333,12 +335,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC2 b 4 /* swizzled int A */ - 0000 0 0 2 &UIC2 c 4 /* swizzled int B */ - 0000 0 0 3 &UIC2 d 4 /* swizzled int C */ - 0000 0 0 4 &UIC2 e 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; }; }; }; diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts index 84cc5e72ddd8..1dfcd7ed199c 100644 --- a/arch/powerpc/boot/dts/makalu.dts +++ b/arch/powerpc/boot/dts/makalu.dts @@ -8,12 +8,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <1>; #size-cells = <1>; model = "amcc,makalu"; compatible = "amcc,makalu"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -29,13 +31,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,405EX"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by U-Boot */ timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <4000>; /* 16 kB */ - d-cache-size = <4000>; /* 16 kB */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ dcr-controller; dcr-access-method = "native"; }; @@ -43,14 +45,14 @@ memory { device_type = "memory"; - reg = <0 0>; /* Filled in by U-Boot */ + reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ }; UIC0: interrupt-controller { compatible = "ibm,uic-405ex", "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -60,11 +62,11 @@ compatible = "ibm,uic-405ex","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -72,11 +74,11 @@ compatible = "ibm,uic-405ex","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1c 4 1d 4>; /* cascade */ + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -89,72 +91,72 @@ SDRAM0: memory-controller { compatible = "ibm,sdram-405ex"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL0: mcmal { compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - interrupt-map-mask = ; + interrupt-map = ; + interrupt-map-mask = <0xffffffff>; }; POB0: opb { compatible = "ibm,opb-405ex", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <80000000 80000000 10000000 - ef600000 ef600000 a00000 - f0000000 f0000000 10000000>; - dcr-reg = <0a0 5>; + ranges = <0x80000000 0x80000000 0x10000000 + 0xef600000 0xef600000 0x00a00000 + 0xf0000000 0xf0000000 0x10000000>; + dcr-reg = <0x0a0 0x005>; clock-frequency = <0>; /* Filled in by U-Boot */ EBC0: ebc { compatible = "ibm,ebc-405ex", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by U-Boot */ /* ranges property is supplied by U-Boot */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl512n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0 200000>; + reg = <0x00000000 0x00200000>; }; partition@200000 { label = "root"; - reg = <200000 200000>; + reg = <0x00200000 0x00200000>; }; partition@400000 { label = "user"; - reg = <400000 3b60000>; + reg = <0x00400000 0x03b60000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; }; @@ -162,68 +164,68 @@ UART0: serial@ef600200 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1a 4>; + interrupts = <0x1a 0x4>; }; UART1: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by U-Boot */ current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC0: i2c@ef600400 { compatible = "ibm,iic-405ex", "ibm,iic"; - reg = ; + reg = <0xef600400 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600500 { compatible = "ibm,iic-405ex", "ibm,iic"; - reg = ; + reg = <0xef600500 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; RGMII0: emac-rgmii@ef600b00 { compatible = "ibm,rgmii-405ex", "ibm,rgmii"; - reg = ; + reg = <0xef600b00 0x00000104>; has-mdio; }; EMAC0: ethernet@ef600900 { - linux,network-index = <0>; + linux,network-index = <0x0>; device_type = "network"; compatible = "ibm,emac-405ex", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef600900 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <0000003f>; /* Start at 6 */ + phy-map = <0x0000003f>; /* Start at 6 */ rgmii-device = <&RGMII0>; rgmii-channel = <0>; has-inverted-stacr-oc; @@ -231,27 +233,27 @@ }; EMAC1: ethernet@ef600a00 { - linux,network-index = <1>; + linux,network-index = <0x1>; device_type = "network"; compatible = "ibm,emac-405ex", "ibm,emac4"; interrupt-parent = <&EMAC1>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef600a00 0x00000070>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; has-inverted-stacr-oc; @@ -266,23 +268,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; - port = <0>; /* port number */ - reg = ; /* Registers */ - dcr-reg = <040 020>; - sdr-base = <400>; + port = <0x0>; /* port number */ + reg = <0xa0000000 0x20000000 /* Config space access */ + 0xef000000 0x00001000>; /* Registers */ + dcr-reg = <0x040 0x020>; + sdr-base = <0x400>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 90000000 0 08000000 - 01000000 0 00000000 e0000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0x00 to 0x3f */ - bus-range = <00 3f>; + bus-range = <0x0 0x3f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -292,12 +294,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC2 0 4 /* swizzled int A */ - 0000 0 0 2 &UIC2 1 4 /* swizzled int B */ - 0000 0 0 3 &UIC2 2 4 /* swizzled int C */ - 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; }; PCIE1: pciex@0c0000000 { @@ -307,23 +309,23 @@ #address-cells = <3>; compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; primary; - port = <1>; /* port number */ - reg = ; /* Registers */ - dcr-reg = <060 020>; - sdr-base = <440>; + port = <0x1>; /* port number */ + reg = <0xc0000000 0x20000000 /* Config space access */ + 0xef001000 0x00001000>; /* Registers */ + dcr-reg = <0x060 0x020>; + sdr-base = <0x440>; /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 98000000 0 08000000 - 01000000 0 00000000 e0010000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* This drives busses 0x40 to 0x7f */ - bus-range = <40 7f>; + bus-range = <0x40 0x7f>; /* Legacy interrupts (note the weird polarity, the bridge seems * to invert PCIe legacy interrupts). @@ -333,12 +335,12 @@ * below are basically de-swizzled numbers. * The real slot is on idsel 0, so the swizzling is 1:1 */ - interrupt-map-mask = <0000 0 0 7>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; interrupt-map = < - 0000 0 0 1 &UIC2 b 4 /* swizzled int A */ - 0000 0 0 2 &UIC2 c 4 /* swizzled int B */ - 0000 0 0 3 &UIC2 d 4 /* swizzled int C */ - 0000 0 0 4 &UIC2 e 4 /* swizzled int D */>; + 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; }; }; }; diff --git a/arch/powerpc/boot/dts/ps3.dts b/arch/powerpc/boot/dts/ps3.dts index 379ded282d5e..96ba5b512afe 100644 --- a/arch/powerpc/boot/dts/ps3.dts +++ b/arch/powerpc/boot/dts/ps3.dts @@ -18,6 +18,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/dts-v1/; + / { model = "SonyPS3"; compatible = "sony,ps3"; @@ -34,7 +36,7 @@ memory { device_type = "memory"; - reg = <0 0 0 0>; + reg = <0x00000000 0x00000000 0x00000000 0x00000000>; }; /* @@ -55,14 +57,14 @@ cpu@0 { device_type = "cpu"; - reg = <0>; - ibm,ppc-interrupt-server#s = <0 1>; + reg = <0x00000000>; + ibm,ppc-interrupt-server#s = <0x0 0x1>; clock-frequency = <0>; timebase-frequency = <0>; - i-cache-size = <8000>; - d-cache-size = <8000>; - i-cache-line-size = <80>; - d-cache-line-size = <80>; + i-cache-size = <32768>; + d-cache-size = <32768>; + i-cache-line-size = <128>; + d-cache-line-size = <128>; }; }; }; diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts index 6a8fa7089ea2..2cd87f66f81f 100644 --- a/arch/powerpc/boot/dts/rainier.dts +++ b/arch/powerpc/boot/dts/rainier.dts @@ -12,12 +12,14 @@ * */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,rainier"; compatible = "amcc,rainier"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -35,13 +37,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440GRx"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -49,14 +51,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440grx","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -66,11 +68,11 @@ compatible = "ibm,uic-440grx","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -78,22 +80,22 @@ compatible = "ibm,uic-440grx","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1c 4 1d 4>; /* cascade */ + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440grx", "ibm,sdr-440ep"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-440grx", "ibm,cpr-440ep"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -105,80 +107,80 @@ SDRAM0: sdram { compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; DMA0: dma { compatible = "ibm,dma-440grx", "ibm,dma-4xx"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440grx", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - interrupt-map-mask = ; + interrupt-map = ; + interrupt-map-mask = <0xffffffff>; }; POB0: opb { compatible = "ibm,opb-440grx", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 1 00000000 80000000 - 80000000 1 80000000 80000000>; + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440grx", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl256n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "Kernel"; - reg = <0 180000>; + reg = <0x00000000 0x00180000>; }; partition@180000 { label = "ramdisk"; - reg = <180000 200000>; + reg = <0x00180000 0x00200000>; }; partition@380000 { label = "file system"; - reg = <380000 3aa0000>; + reg = <0x00380000 0x03aa0000>; }; partition@3e20000 { label = "kozio"; - reg = <3e20000 140000>; + reg = <0x03e20000 0x00140000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; @@ -187,69 +189,69 @@ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; + current-speed = <115200>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@ef600500 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC1>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; UART3: serial@ef600600 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC1>; - interrupts = <4 4>; + interrupts = <0x4 0x4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-440grx", "ibm,iic"; - reg = ; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-440grx", "ibm,iic"; - reg = ; + reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-440grx", "ibm,zmii"; - reg = ; + reg = <0xef600d00 0x0000000c>; }; RGMII0: emac-rgmii@ef601000 { compatible = "ibm,rgmii-440grx", "ibm,rgmii"; - reg = ; + reg = <0xef601000 0x00000008>; has-mdio; }; @@ -257,23 +259,23 @@ device_type = "network"; compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <0>; rgmii-device = <&RGMII0>; @@ -286,23 +288,23 @@ device_type = "network"; compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC1>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef600f00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <1>; rgmii-device = <&RGMII0>; @@ -319,24 +321,24 @@ #address-cells = <3>; compatible = "ibm,plb440grx-pci", "ibm,plb-pci"; primary; - reg = <1 eec00000 8 /* Config space access */ - 1 eed00000 4 /* IACK */ - 1 eed00000 4 /* Special cycle */ - 1 ef400000 40>; /* Internal registers */ + reg = <0x00000001 0xeec00000 0x00000008 /* Config space access */ + 0x00000001 0xeed00000 0x00000004 /* IACK */ + 0x00000001 0xeed00000 0x00000004 /* Special cycle */ + 0x00000001 0xef400000 0x00000040>; /* Internal registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed. Chip supports a second * IO range but we don't use it for now */ - ranges = <02000000 0 80000000 1 80000000 0 10000000 - 01000000 0 00000000 1 e8000000 0 00100000>; + ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x10000000 + 0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00100000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* All PCI interrupts are routed to IRQ 67 */ - interrupt-map-mask = <0000 0 0 0>; - interrupt-map = < 0000 0 0 0 &UIC2 3 8 >; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >; }; }; diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts index 72d67564bdfc..149dabc55217 100644 --- a/arch/powerpc/boot/dts/sequoia.dts +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -12,12 +12,14 @@ * */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,sequoia"; compatible = "amcc,sequoia"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -35,13 +37,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440EPx"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -49,14 +51,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440epx","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -66,11 +68,11 @@ compatible = "ibm,uic-440epx","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; @@ -78,22 +80,22 @@ compatible = "ibm,uic-440epx","ibm,uic"; interrupt-controller; cell-index = <2>; - dcr-reg = <0e0 009>; + dcr-reg = <0x0e0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1c 4 1d 4>; /* cascade */ + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440epx", "ibm,sdr-440ep"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-440epx", "ibm,cpr-440ep"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -105,44 +107,44 @@ SDRAM0: sdram { compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; DMA0: dma { compatible = "ibm,dma-440epx", "ibm,dma-4xx"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440epx", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <2>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - interrupt-map-mask = ; + interrupt-map = ; + interrupt-map-mask = <0xffffffff>; }; USB1: usb@e0000400 { compatible = "ohci-be"; - reg = <0 e0000400 60>; + reg = <0x00000000 0xe0000400 0x00000060>; interrupt-parent = <&UIC0>; - interrupts = <15 8>; + interrupts = <0x15 0x8>; }; USB0: ehci@e0000300 { compatible = "ibm,usb-ehci-440epx", "usb-ehci"; interrupt-parent = <&UIC0>; - interrupts = <1a 4>; - reg = <0 e0000300 90 0 e0000390 70>; + interrupts = <0x1a 0x4>; + reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>; big-endian; }; @@ -150,50 +152,50 @@ compatible = "ibm,opb-440epx", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 1 00000000 80000000 - 80000000 1 80000000 80000000>; + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440epx", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; nor_flash@0,0 { compatible = "amd,s29gl256n", "cfi-flash"; bank-width = <2>; - reg = <0 000000 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "Kernel"; - reg = <0 180000>; + reg = <0x00000000 0x00180000>; }; partition@180000 { label = "ramdisk"; - reg = <180000 200000>; + reg = <0x00180000 0x00200000>; }; partition@380000 { label = "file system"; - reg = <380000 3aa0000>; + reg = <0x00380000 0x03aa0000>; }; partition@3e20000 { label = "kozio"; - reg = <3e20000 140000>; + reg = <0x03e20000 0x00140000>; }; partition@3f60000 { label = "env"; - reg = <3f60000 40000>; + reg = <0x03f60000 0x00040000>; }; partition@3fa0000 { label = "u-boot"; - reg = <3fa0000 60000>; + reg = <0x03fa0000 0x00060000>; }; }; @@ -202,69 +204,69 @@ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; + current-speed = <115200>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@ef600500 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC1>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; UART3: serial@ef600600 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC1>; - interrupts = <4 4>; + interrupts = <0x4 0x4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-440epx", "ibm,iic"; - reg = ; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-440epx", "ibm,iic"; - reg = ; + reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-440epx", "ibm,zmii"; - reg = ; + reg = <0xef600d00 0x0000000c>; }; RGMII0: emac-rgmii@ef601000 { compatible = "ibm,rgmii-440epx", "ibm,rgmii"; - reg = ; + reg = <0xef601000 0x00000008>; has-mdio; }; @@ -272,23 +274,23 @@ device_type = "network"; compatible = "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC0>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <0>; rgmii-device = <&RGMII0>; @@ -301,23 +303,23 @@ device_type = "network"; compatible = "ibm,emac-440epx", "ibm,emac4"; interrupt-parent = <&EMAC1>; - interrupts = <0 1>; + interrupts = <0x0 0x1>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - reg = ; + interrupt-map = ; + reg = <0xef600f00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <1>; rgmii-device = <&RGMII0>; @@ -334,10 +336,10 @@ #address-cells = <3>; compatible = "ibm,plb440epx-pci", "ibm,plb-pci"; primary; - reg = <1 eec00000 8 /* Config space access */ - 1 eed00000 4 /* IACK */ - 1 eed00000 4 /* Special cycle */ - 1 ef400000 40>; /* Internal registers */ + reg = <0x00000001 0xeec00000 0x00000008 /* Config space access */ + 0x00000001 0xeed00000 0x00000004 /* IACK */ + 0x00000001 0xeed00000 0x00000004 /* Special cycle */ + 0x00000001 0xef400000 0x00000040>; /* Internal registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed. Chip supports a second @@ -347,16 +349,16 @@ * I/O 1 E800 0000 1 E800 FFFF 64KB * I/O 1 E880 0000 1 EBFF FFFF 56MB */ - ranges = <02000000 0 80000000 1 80000000 0 40000000 - 01000000 0 00000000 1 e8000000 0 00010000 - 01000000 0 00000000 1 e8800000 0 03800000>; + ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000 + 0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000 + 0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* All PCI interrupts are routed to IRQ 67 */ - interrupt-map-mask = <0000 0 0 0>; - interrupt-map = < 0000 0 0 0 &UIC2 3 8 >; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >; }; }; diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts index e808e1c5593a..dcb749884b6d 100644 --- a/arch/powerpc/boot/dts/taishan.dts +++ b/arch/powerpc/boot/dts/taishan.dts @@ -10,12 +10,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,taishan"; compatible = "amcc,taishan"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC2; @@ -31,13 +33,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440GX"; - reg = <0>; - clock-frequency = <2FAF0800>; // 800MHz + reg = <0x00000000>; + clock-frequency = <800000000>; // 800MHz timebase-frequency = <0>; // Filled in by zImage - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <8000>; /* 32 kB */ - d-cache-size = <8000>; /* 32 kB */ + i-cache-line-size = <50>; + d-cache-line-size = <50>; + i-cache-size = <32768>; /* 32 kB */ + d-cache-size = <32768>; /* 32 kB */ dcr-controller; dcr-access-method = "native"; }; @@ -45,7 +47,7 @@ memory { device_type = "memory"; - reg = <0 0 0>; // Filled in by zImage + reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage }; @@ -53,7 +55,7 @@ compatible = "ibm,uic-440gx", "ibm,uic"; interrupt-controller; cell-index = <3>; - dcr-reg = <200 009>; + dcr-reg = <0x200 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -64,11 +66,11 @@ compatible = "ibm,uic-440gx", "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <01 4 00 4>; /* cascade - first non-critical */ + interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */ interrupt-parent = <&UICB0>; }; @@ -77,11 +79,11 @@ compatible = "ibm,uic-440gx", "ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <03 4 02 4>; /* cascade */ + interrupts = <0x3 0x4 0x2 0x4>; /* cascade */ interrupt-parent = <&UICB0>; }; @@ -89,29 +91,29 @@ compatible = "ibm,uic-440gx", "ibm,uic"; interrupt-controller; cell-index = <2>; /* was 1 */ - dcr-reg = <210 009>; + dcr-reg = <0x210 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <05 4 04 4>; /* cascade */ + interrupts = <0x5 0x4 0x4 0x4>; /* cascade */ interrupt-parent = <&UICB0>; }; CPC0: cpc { compatible = "ibm,cpc-440gp"; - dcr-reg = <0b0 003 0e0 010>; + dcr-reg = <0x0b0 0x003 0x0e0 0x010>; // FIXME: anything else? }; L2C0: l2c { compatible = "ibm,l2-cache-440gx", "ibm,l2-cache"; - dcr-reg = <20 8 /* Internal SRAM DCR's */ - 30 8>; /* L2 cache DCR's */ - cache-line-size = <20>; /* 32 bytes */ - cache-size = <40000>; /* L2, 256K */ + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ interrupt-parent = <&UIC2>; - interrupts = <17 1>; + interrupts = <0x17 0x1>; }; plb { @@ -119,41 +121,41 @@ #address-cells = <2>; #size-cells = <1>; ranges; - clock-frequency = <9896800>; // 160MHz + clock-frequency = <160000000>; // 160MHz SDRAM0: memory-controller { compatible = "ibm,sdram-440gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; // FIXME: anything else? }; SRAM0: sram { compatible = "ibm,sram-440gp"; - dcr-reg = <020 8 00a 1>; + dcr-reg = <0x020 0x008 0x00a 0x001>; }; DMA0: dma { // FIXME: ??? compatible = "ibm,dma-440gp"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440gx", "ibm,mcmal2"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <4>; num-rx-chans = <4>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; - interrupt-map-mask = ; + interrupt-map = ; + interrupt-map-mask = <0xffffffff>; }; POB0: opb { @@ -162,26 +164,26 @@ #size-cells = <1>; /* Wish there was a nicer way of specifying a full 32-bit range */ - ranges = <00000000 1 00000000 80000000 - 80000000 1 80000000 80000000>; - dcr-reg = <090 00b>; + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + dcr-reg = <0x090 0x00b>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; - clock-frequency = <4C4B400>; // 80MHz + interrupts = <0x7 0x4>; + clock-frequency = <80000000>; // 80MHz EBC0: ebc { compatible = "ibm,ebc-440gx", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; - clock-frequency = <4C4B400>; // 80MHz + clock-frequency = <80000000>; // 80MHz /* ranges property is supplied by zImage * based on firmware's configuration of the * EBC bridge */ - interrupts = <5 4>; + interrupts = <0x5 0x4>; interrupt-parent = <&UIC1>; /* TODO: Add other EBC devices */ @@ -192,103 +194,103 @@ UART0: serial@40000200 { device_type = "serial"; compatible = "ns16550"; - reg = <40000200 8>; - virtual-reg = ; - clock-frequency = ; - current-speed = <1C200>; /* 115200 */ + reg = <0x40000200 0x00000008>; + virtual-reg = <0xe0000200>; + clock-frequency = <11059200>; + current-speed = <115200>; /* 115200 */ interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@40000300 { device_type = "serial"; compatible = "ns16550"; - reg = <40000300 8>; - virtual-reg = ; - clock-frequency = ; - current-speed = <1C200>; /* 115200 */ + reg = <0x40000300 0x00000008>; + virtual-reg = <0xe0000300>; + clock-frequency = <11059200>; + current-speed = <115200>; /* 115200 */ interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC0: i2c@40000400 { /* FIXME */ compatible = "ibm,iic-440gp", "ibm,iic"; - reg = <40000400 14>; + reg = <0x40000400 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@40000500 { /* FIXME */ compatible = "ibm,iic-440gp", "ibm,iic"; - reg = <40000500 14>; + reg = <0x40000500 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; }; GPIO0: gpio@40000700 { /* FIXME */ compatible = "ibm,gpio-440gp"; - reg = <40000700 20>; + reg = <0x40000700 0x00000020>; }; ZMII0: emac-zmii@40000780 { compatible = "ibm,zmii-440gx", "ibm,zmii"; - reg = <40000780 c>; + reg = <0x40000780 0x0000000c>; }; RGMII0: emac-rgmii@40000790 { compatible = "ibm,rgmii"; - reg = <40000790 8>; + reg = <0x40000790 0x00000008>; }; TAH0: emac-tah@40000b50 { compatible = "ibm,tah-440gx", "ibm,tah"; - reg = <40000b50 30>; + reg = <0x40000b50 0x00000030>; }; TAH1: emac-tah@40000d50 { compatible = "ibm,tah-440gx", "ibm,tah"; - reg = <40000d50 30>; + reg = <0x40000d50 0x00000030>; }; EMAC0: ethernet@40000800 { - unused = <1>; + unused = <0x1>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = <40000800 70>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0x40000800 0x00000070>; local-mac-address = [000000000000]; // Filled in by zImage mal-device = <&MAL0>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000001>; + phy-map = <0x00000001>; zmii-device = <&ZMII0>; zmii-channel = <0>; }; EMAC1: ethernet@40000900 { - unused = <1>; + unused = <0x1>; device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC1>; - interrupts = <1e 4 1f 4>; - reg = <40000900 70>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0x40000900 0x00000070>; local-mac-address = [000000000000]; // Filled in by zImage mal-device = <&MAL0>; mal-tx-channel = <1>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000001>; + phy-map = <0x00000001>; zmii-device = <&ZMII0>; zmii-channel = <1>; }; @@ -297,18 +299,18 @@ device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC2>; - interrupts = <0 4 1 4>; - reg = <40000c00 70>; + interrupts = <0x0 0x4 0x1 0x4>; + reg = <0x40000c00 0x00000070>; local-mac-address = [000000000000]; // Filled in by zImage mal-device = <&MAL0>; mal-tx-channel = <2>; mal-rx-channel = <2>; cell-index = <2>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000001>; + phy-map = <0x00000001>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; zmii-device = <&ZMII0>; @@ -321,18 +323,18 @@ device_type = "network"; compatible = "ibm,emac-440gx", "ibm,emac4"; interrupt-parent = <&UIC2>; - interrupts = <2 4 3 4>; - reg = <40000e00 70>; + interrupts = <0x2 0x4 0x3 0x4>; + reg = <0x40000e00 0x00000070>; local-mac-address = [000000000000]; // Filled in by zImage mal-device = <&MAL0>; mal-tx-channel = <3>; mal-rx-channel = <3>; cell-index = <3>; - max-frame-size = <2328>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rgmii"; - phy-map = <00000003>; + phy-map = <0x00000003>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; zmii-device = <&ZMII0>; @@ -344,9 +346,9 @@ GPT0: gpt@40000a00 { /* FIXME */ - reg = <40000a00 d4>; + reg = <0x40000a00 0x000000d4>; interrupt-parent = <&UIC0>; - interrupts = <12 4 13 4 14 4 15 4 16 4>; + interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>; }; }; @@ -360,34 +362,34 @@ primary; large-inbound-windows; enable-msi-hole; - reg = <2 0ec00000 8 /* Config space access */ - 0 0 0 /* no IACK cycles */ - 2 0ed00000 4 /* Special cycles */ - 2 0ec80000 100 /* Internal registers */ - 2 0ec80100 fc>; /* Internal messaging registers */ + reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x00000002 0x0ed00000 0x00000004 /* Special cycles */ + 0x00000002 0x0ec80000 0x00000100 /* Internal registers */ + 0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed */ - ranges = <02000000 0 80000000 00000003 80000000 0 80000000 - 01000000 0 00000000 00000002 08000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; - interrupt-map-mask = ; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 1 */ - 0800 0 0 1 &UIC0 17 8 - 0800 0 0 2 &UIC0 18 8 - 0800 0 0 3 &UIC0 19 8 - 0800 0 0 4 &UIC0 1a 8 + 0x800 0x0 0x0 0x1 &UIC0 0x17 0x8 + 0x800 0x0 0x0 0x2 &UIC0 0x18 0x8 + 0x800 0x0 0x0 0x3 &UIC0 0x19 0x8 + 0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8 /* IDSEL 2 */ - 1000 0 0 1 &UIC0 18 8 - 1000 0 0 2 &UIC0 19 8 - 1000 0 0 3 &UIC0 1a 8 - 1000 0 0 4 &UIC0 17 8 + 0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8 + 0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8 + 0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8 + 0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8 >; }; }; diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts index a328607c8f84..4a9f726ada13 100644 --- a/arch/powerpc/boot/dts/walnut.dts +++ b/arch/powerpc/boot/dts/walnut.dts @@ -9,12 +9,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <1>; #size-cells = <1>; model = "ibm,walnut"; compatible = "ibm,walnut"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC; @@ -29,13 +31,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,405GP"; - reg = <0>; - clock-frequency = ; /* Filled in by zImage */ + reg = <0x00000000>; + clock-frequency = <200000000>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <4000>; - d-cache-size = <4000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; + d-cache-size = <16384>; dcr-controller; dcr-access-method = "native"; }; @@ -43,14 +45,14 @@ memory { device_type = "memory"; - reg = <0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller { compatible = "ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 9>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -65,63 +67,63 @@ SDRAM0: memory-controller { compatible = "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; MAL: mcmal { compatible = "ibm,mcmal-405gp", "ibm,mcmal"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <1>; num-rx-chans = <1>; interrupt-parent = <&UIC0>; interrupts = < - b 4 /* TXEOB */ - c 4 /* RXEOB */ - a 4 /* SERR */ - d 4 /* TXDE */ - e 4 /* RXDE */>; + 0xb 0x4 /* TXEOB */ + 0xc 0x4 /* RXEOB */ + 0xa 0x4 /* SERR */ + 0xd 0x4 /* TXDE */ + 0xe 0x4 /* RXDE */>; }; POB0: opb { compatible = "ibm,opb-405gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = ; - dcr-reg = <0a0 5>; + ranges = <0xef600000 0xef600000 0x00a00000>; + dcr-reg = <0x0a0 0x005>; clock-frequency = <0>; /* Filled in by zImage */ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <2580>; + current-speed = <9600>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <2580>; + current-speed = <9600>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; IIC: i2c@ef600500 { compatible = "ibm,iic-405gp", "ibm,iic"; - reg = ; + reg = <0xef600500 0x00000011>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; GPIO: gpio@ef600700 { compatible = "ibm,gpio-405gp"; - reg = ; + reg = <0xef600700 0x00000020>; }; EMAC: ethernet@ef600800 { @@ -129,26 +131,26 @@ compatible = "ibm,emac-405gp", "ibm,emac"; interrupt-parent = <&UIC0>; interrupts = < - f 4 /* Ethernet */ - 9 4 /* Ethernet Wake Up */>; + 0xf 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; local-mac-address = [000000000000]; /* Filled in by zImage */ - reg = ; + reg = <0xef600800 0x00000070>; mal-device = <&MAL>; mal-tx-channel = <0>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000001>; + phy-map = <0x00000001>; }; }; EBC0: ebc { compatible = "ibm,ebc-405gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; /* The ranges property is supplied by the bootwrapper @@ -158,18 +160,18 @@ clock-frequency = <0>; /* Filled in by zImage */ sram@0,0 { - reg = <0 0 80000>; + reg = <0x00000000 0x00000000 0x00080000>; }; flash@0,80000 { compatible = "jedec-flash"; bank-width = <1>; - reg = <0 80000 80000>; + reg = <0x00000000 0x00080000 0x00080000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "OpenBIOS"; - reg = <0 80000>; + reg = <0x00000000 0x00080000>; read-only; }; }; @@ -177,24 +179,24 @@ nvram@1,0 { /* NVRAM and RTC */ compatible = "ds1743-nvram"; - #bytes = <2000>; - reg = <1 0 2000>; + #bytes = <0x2000>; + reg = <0x00000001 0x00000000 0x00002000>; }; keyboard@2,0 { compatible = "intel,82C42PC"; - reg = <2 0 2>; + reg = <0x00000002 0x00000000 0x00000002>; }; ir@3,0 { compatible = "ti,TIR2000PAG"; - reg = <3 0 10>; + reg = <0x00000003 0x00000000 0x00000010>; }; fpga@7,0 { compatible = "Walnut-FPGA"; - reg = <7 0 10>; - virtual-reg = ; + reg = <0x00000007 0x00000000 0x00000010>; + virtual-reg = <0xf0300005>; }; }; @@ -205,35 +207,35 @@ #address-cells = <3>; compatible = "ibm,plb405gp-pci", "ibm,plb-pci"; primary; - reg = ; /* Internal registers */ + reg = <0xeec00000 0x00000008 /* Config space access */ + 0xeed80000 0x00000004 /* IACK */ + 0xeed80000 0x00000004 /* Special cycle */ + 0xef480000 0x00000040>; /* Internal registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed. Chip supports a second * IO range but we don't use it for now */ - ranges = <02000000 0 80000000 80000000 0 20000000 - 01000000 0 00000000 e8000000 0 00010000>; + ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; /* Walnut has all 4 IRQ pins tied together per slot */ - interrupt-map-mask = ; + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; interrupt-map = < /* IDSEL 1 */ - 0800 0 0 0 &UIC0 1c 8 + 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 /* IDSEL 2 */ - 1000 0 0 0 &UIC0 1d 8 + 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8 /* IDSEL 3 */ - 1800 0 0 0 &UIC0 1e 8 + 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IDSEL 4 */ - 2000 0 0 0 &UIC0 1f 8 + 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8 >; }; }; diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index b04a52e22bf5..c52e4fb89abf 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -9,12 +9,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "pika,warp"; compatible = "pika,warp"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -28,13 +30,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440EP"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -42,14 +44,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440ep","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -59,22 +61,22 @@ compatible = "ibm,uic-440ep","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440ep"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-440ep"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -86,86 +88,86 @@ SDRAM0: sdram { compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; DMA0: dma { compatible = "ibm,dma-440ep", "ibm,dma-440gp"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <4>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; + interrupt-map = ; }; POB0: opb { compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <00000000 0 00000000 80000000 - 80000000 0 80000000 80000000>; + ranges = <0x00000000 0x00000000 0x00000000 0x80000000 + 0x80000000 0x00000000 0x80000000 0x80000000>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; fpga@2,0 { compatible = "pika,fpga"; - reg = <2 0 2200>; - interrupts = <18 8>; + reg = <0x00000002 0x00000000 0x00002200>; + interrupts = <0x18 0x8>; interrupt-parent = <&UIC0>; }; nor_flash@0,0 { compatible = "amd,s29gl512n", "cfi-flash"; bank-width = <2>; - reg = <0 0 4000000>; + reg = <0x00000000 0x00000000 0x04000000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "kernel"; - reg = <0 180000>; + reg = <0x00000000 0x00180000>; }; partition@180000 { label = "root"; - reg = <180000 3480000>; + reg = <0x00180000 0x03480000>; }; partition@3600000 { label = "user"; - reg = <3600000 900000>; + reg = <0x03600000 0x00900000>; }; partition@3f00000 { label = "fpga"; - reg = <3f00000 40000>; + reg = <0x03f00000 0x00040000>; }; partition@3f40000 { label = "env"; - reg = <3f40000 40000>; + reg = <0x03f40000 0x00040000>; }; partition@3f80000 { label = "u-boot"; - reg = <3f80000 80000>; + reg = <0x03f80000 0x00080000>; }; }; }; @@ -173,60 +175,60 @@ UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; + current-speed = <115200>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; - reg = ; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; GPIO0: gpio@ef600b00 { compatible = "ibm,gpio-440ep"; - reg = ; + reg = <0xef600b00 0x00000048>; }; GPIO1: gpio@ef600c00 { compatible = "ibm,gpio-440ep"; - reg = ; + reg = <0xef600c00 0x00000048>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; - reg = ; + reg = <0xef600d00 0x0000000c>; }; EMAC0: ethernet@ef600e00 { device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = ; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0 1>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <0>; }; usb@ef601000 { compatible = "ohci-be"; - reg = ; - interrupts = <8 1 9 1>; + reg = <0xef601000 0x00000080>; + interrupts = <0x8 0x1 0x9 0x1>; interrupt-parent = < &UIC1 >; }; }; diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts index 0d6d332814e0..e39422aa0d85 100644 --- a/arch/powerpc/boot/dts/yosemite.dts +++ b/arch/powerpc/boot/dts/yosemite.dts @@ -9,12 +9,14 @@ * any warranty of any kind, whether express or implied. */ +/dts-v1/; + / { #address-cells = <2>; #size-cells = <1>; model = "amcc,yosemite"; compatible = "amcc,yosemite","amcc,bamboo"; - dcr-parent = <&/cpus/cpu@0>; + dcr-parent = <&{/cpus/cpu@0}>; aliases { ethernet0 = &EMAC0; @@ -32,13 +34,13 @@ cpu@0 { device_type = "cpu"; model = "PowerPC,440EP"; - reg = <0>; + reg = <0x00000000>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <20>; - d-cache-line-size = <20>; - i-cache-size = <8000>; - d-cache-size = <8000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; }; @@ -46,14 +48,14 @@ memory { device_type = "memory"; - reg = <0 0 0>; /* Filled in by zImage */ + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ }; UIC0: interrupt-controller0 { compatible = "ibm,uic-440ep","ibm,uic"; interrupt-controller; cell-index = <0>; - dcr-reg = <0c0 009>; + dcr-reg = <0x0c0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; @@ -63,22 +65,22 @@ compatible = "ibm,uic-440ep","ibm,uic"; interrupt-controller; cell-index = <1>; - dcr-reg = <0d0 009>; + dcr-reg = <0x0d0 0x009>; #address-cells = <0>; #size-cells = <0>; #interrupt-cells = <2>; - interrupts = <1e 4 1f 4>; /* cascade */ + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ interrupt-parent = <&UIC0>; }; SDR0: sdr { compatible = "ibm,sdr-440ep"; - dcr-reg = <00e 002>; + dcr-reg = <0x00e 0x002>; }; CPR0: cpr { compatible = "ibm,cpr-440ep"; - dcr-reg = <00c 002>; + dcr-reg = <0x00c 0x002>; }; plb { @@ -90,29 +92,29 @@ SDRAM0: sdram { compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; - dcr-reg = <010 2>; + dcr-reg = <0x010 0x002>; }; DMA0: dma { compatible = "ibm,dma-440ep", "ibm,dma-440gp"; - dcr-reg = <100 027>; + dcr-reg = <0x100 0x027>; }; MAL0: mcmal { compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; - dcr-reg = <180 62>; + dcr-reg = <0x180 0x062>; num-tx-chans = <4>; num-rx-chans = <2>; interrupt-parent = <&MAL0>; - interrupts = <0 1 2 3 4>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = ; + interrupt-map = ; }; POB0: opb { @@ -122,110 +124,110 @@ /* Bamboo is oddball in the 44x world and doesn't use the ERPN * bits. */ - ranges = <00000000 0 00000000 80000000 - 80000000 0 80000000 80000000>; + ranges = <0x00000000 0x00000000 0x00000000 0x80000000 + 0x80000000 0x00000000 0x80000000 0x80000000>; interrupt-parent = <&UIC1>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; - dcr-reg = <012 2>; + dcr-reg = <0x012 0x002>; #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - interrupts = <5 1>; + interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; }; UART0: serial@ef600300 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <1c200>; + current-speed = <115200>; interrupt-parent = <&UIC0>; - interrupts = <0 4>; + interrupts = <0x0 0x4>; }; UART1: serial@ef600400 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <1 4>; + interrupts = <0x1 0x4>; }; UART2: serial@ef600500 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <3 4>; + interrupts = <0x3 0x4>; status = "disabled"; }; UART3: serial@ef600600 { device_type = "serial"; compatible = "ns16550"; - reg = ; - virtual-reg = ; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; clock-frequency = <0>; current-speed = <0>; interrupt-parent = <&UIC0>; - interrupts = <4 4>; + interrupts = <0x4 0x4>; status = "disabled"; }; IIC0: i2c@ef600700 { compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; - reg = ; + reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <2 4>; + interrupts = <0x2 0x4>; }; IIC1: i2c@ef600800 { compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; - reg = ; + reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; - interrupts = <7 4>; + interrupts = <0x7 0x4>; }; spi@ef600900 { compatible = "amcc,spi-440ep"; - reg = ; - interrupts = <8 4>; + reg = <0xef600900 0x00000006>; + interrupts = <0x8 0x4>; interrupt-parent = <&UIC0>; }; ZMII0: emac-zmii@ef600d00 { compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; - reg = ; + reg = <0xef600d00 0x0000000c>; }; EMAC0: ethernet@ef600e00 { device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1c 4 1d 4>; - reg = ; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0 1>; mal-rx-channel = <0>; cell-index = <0>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <0>; }; @@ -234,26 +236,26 @@ device_type = "network"; compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; interrupt-parent = <&UIC1>; - interrupts = <1e 4 1f 4>; - reg = ; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0xef600f00 0x00000070>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <2 3>; mal-rx-channel = <1>; cell-index = <1>; - max-frame-size = <5dc>; - rx-fifo-size = <1000>; - tx-fifo-size = <800>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; phy-mode = "rmii"; - phy-map = <00000000>; + phy-map = <0x00000000>; zmii-device = <&ZMII0>; zmii-channel = <1>; }; usb@ef601000 { compatible = "ohci-be"; - reg = ; - interrupts = <8 4 9 4>; + reg = <0xef601000 0x00000080>; + interrupts = <0x8 0x4 0x9 0x4>; interrupt-parent = < &UIC1 >; }; }; @@ -265,35 +267,35 @@ #address-cells = <3>; compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; primary; - reg = <0 eec00000 8 /* Config space access */ - 0 eed00000 4 /* IACK */ - 0 eed00000 4 /* Special cycle */ - 0 ef400000 40>; /* Internal registers */ + reg = <0x00000000 0xeec00000 0x00000008 /* Config space access */ + 0x00000000 0xeed00000 0x00000004 /* IACK */ + 0x00000000 0xeed00000 0x00000004 /* Special cycle */ + 0x00000000 0xef400000 0x00000040>; /* Internal registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed. Chip supports a second * IO range but we don't use it for now */ - ranges = <02000000 0 a0000000 0 a0000000 0 20000000 - 01000000 0 00000000 0 e8000000 0 00010000>; + ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ - dma-ranges = <42000000 0 0 0 0 0 80000000>; + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; /* Bamboo has all 4 IRQ pins tied together per slot */ - interrupt-map-mask = ; + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; interrupt-map = < /* IDSEL 1 */ - 0800 0 0 0 &UIC0 1c 8 + 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 /* IDSEL 2 */ - 1000 0 0 0 &UIC0 1b 8 + 0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8 /* IDSEL 3 */ - 1800 0 0 0 &UIC0 1a 8 + 0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8 /* IDSEL 4 */ - 2000 0 0 0 &UIC0 19 8 + 0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8 >; }; }; -- cgit v1.2.3 From 6f031101f5c6bb44762911909da575127f676eb8 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Fri, 16 May 2008 00:41:23 +1000 Subject: [POWERPC] 4xx: Fix PCI mem in rainier DTS This fixes the PCI node in the Rainier to match the spec from AMCC. A similar fix was done for 440EPx, which shares the same values as 440GRx. Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/rainier.dts | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts index 2cd87f66f81f..2afb63a42ea9 100644 --- a/arch/powerpc/boot/dts/rainier.dts +++ b/arch/powerpc/boot/dts/rainier.dts @@ -330,8 +330,9 @@ * later cannot be changed. Chip supports a second * IO range but we don't use it for now */ - ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x10000000 - 0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00100000>; + ranges = <0x02000000 0x0 0x80000000 0x1 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0x1 0xe8000000 0x0 0x00010000 + 0x01000000 0x0 0x00000000 0x1 0xe8800000 0x0 0x03800000>; /* Inbound 2GB range starting at 0 */ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; -- cgit v1.2.3 From 0393cb615f369b6ea0e636dd4d1e25675657dc75 Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Tue, 29 Apr 2008 13:27:46 +1000 Subject: [POWERPC] PIKA Warp: Update DTS to support Rev B boards * Switched from 64M NOR/64M NAND to 4M NOR/256M NAND. * Added led entries. * Added fpga-sd entry. * Added ad7414 entry. Signed-off-by: Sean MacLennan Acked-by: Grant Likely Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/warp.dts | 55 ++++++++++++++++++++++++++---------------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index c52e4fb89abf..340018cf16b7 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -134,40 +134,33 @@ fpga@2,0 { compatible = "pika,fpga"; - reg = <0x00000002 0x00000000 0x00002200>; + reg = <0x00000002 0x00000000 0x00001000>; interrupts = <0x18 0x8>; interrupt-parent = <&UIC0>; }; + fpga@2,4000 { + compatible = "pika,fpga-sd"; + reg = <0x00000002 0x00004000 0x00000A00>; + }; + nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; + compatible = "amd,s29gl032a", "cfi-flash"; bank-width = <2>; - reg = <0x00000000 0x00000000 0x04000000>; + reg = <0x00000000 0x00000000 0x00400000>; #address-cells = <1>; #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x00180000>; - }; - partition@180000 { - label = "root"; - reg = <0x00180000 0x03480000>; - }; - partition@3600000 { - label = "user"; - reg = <0x03600000 0x00900000>; - }; - partition@3f00000 { + partition@300000 { label = "fpga"; - reg = <0x03f00000 0x00040000>; + reg = <0x0030000 0x00040000>; }; - partition@3f40000 { + partition@340000 { label = "env"; - reg = <0x03f40000 0x00040000>; + reg = <0x0340000 0x00040000>; }; - partition@3f80000 { + partition@380000 { label = "u-boot"; - reg = <0x03f80000 0x00080000>; + reg = <0x0380000 0x00080000>; }; }; }; @@ -188,16 +181,36 @@ reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; + index = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + ad7414@4a { + compatible = "adi,ad7414"; + reg = <0x4a>; + interrupts = <0x19 0x8>; + interrupt-parent = <&UIC0>; + }; }; GPIO0: gpio@ef600b00 { compatible = "ibm,gpio-440ep"; reg = <0xef600b00 0x00000048>; + #gpio-cells = <2>; + gpio-controller; }; GPIO1: gpio@ef600c00 { compatible = "ibm,gpio-440ep"; reg = <0xef600c00 0x00000048>; + #gpio-cells = <2>; + gpio-controller; + + led@31 { + compatible = "linux,gpio-led"; + linux,name = ":green:"; + gpios = <&GPIO1 0x30 0>; + }; }; ZMII0: emac-zmii@ef600d00 { -- cgit v1.2.3 From 4ebef31fa6e013e5cd3d4522e6018eb6d55046be Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Tue, 20 May 2008 08:28:52 -0500 Subject: [POWERPC] PIKA Warp: Update platform code to support Rev B boards * Switched from 64M NOR/64M NAND to 4M NOR/256M NAND. * Full DTM support including critical temperature. * Added POST information. * Removed LED function, moved to new LED driver. * Moved ad7414 to new style I2C initialization. Signed-off-by: Sean MacLennan Signed-off-by: Josh Boyer --- arch/powerpc/boot/cuboot-warp.c | 47 +++++- arch/powerpc/platforms/44x/warp-nand.c | 49 ++++-- arch/powerpc/platforms/44x/warp.c | 293 +++++++++++++++++++++++++++------ 3 files changed, 324 insertions(+), 65 deletions(-) diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c index eb108a877492..21780210057d 100644 --- a/arch/powerpc/boot/cuboot-warp.c +++ b/arch/powerpc/boot/cuboot-warp.c @@ -10,6 +10,7 @@ #include "ops.h" #include "4xx.h" #include "cuboot.h" +#include "stdio.h" #define TARGET_4xx #define TARGET_44x @@ -17,14 +18,54 @@ static bd_t bd; -static void warp_fixups(void) +static void warp_fixup_one_nor(u32 from, u32 to) { - unsigned long sysclk = 66000000; + void *devp; + char name[50]; + u32 v[2]; + + sprintf(name, "/plb/opb/ebc/nor_flash@0,0/partition@%x", from); + + devp = finddevice(name); + if (!devp) + return; + + if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) { + v[0] = to; + setprop(devp, "reg", v, sizeof(v)); + + printf("NOR 64M fixup %x -> %x\r\n", from, to); + } +} + - ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); +static void warp_fixups(void) +{ + ibm440ep_fixup_clocks(66000000, 11059200, 50000000); ibm4xx_sdram_fixup_memsize(); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); + + /* Fixup for 64M flash on Rev A boards. */ + if (bd.bi_flashsize == 0x4000000) { + void *devp; + u32 v[3]; + + devp = finddevice("/plb/opb/ebc/nor_flash@0,0"); + if (!devp) + return; + + /* Fixup the size */ + if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) { + v[2] = bd.bi_flashsize; + setprop(devp, "reg", v, sizeof(v)); + } + + /* Fixup parition offsets */ + warp_fixup_one_nor(0x300000, 0x3f00000); + warp_fixup_one_nor(0x340000, 0x3f40000); + warp_fixup_one_nor(0x380000, 0x3f80000); + } } diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c index 9150318cfc56..d293c702e734 100644 --- a/arch/powerpc/platforms/44x/warp-nand.c +++ b/arch/powerpc/platforms/44x/warp-nand.c @@ -11,8 +11,10 @@ #include #include #include +#include #include + #ifdef CONFIG_MTD_NAND_NDFC #define CS_NAND_0 1 /* use chip select 1 for NAND device 0 */ @@ -35,13 +37,23 @@ static struct mtd_partition nand_parts[] = { { .name = "root", .offset = 0x0200000, - .size = 0x3400000 + .size = 0x3E00000 + }, + { + .name = "persistent", + .offset = 0x4000000, + .size = 0x4000000 }, { - .name = "user", - .offset = 0x3600000, - .size = 0x0A00000 + .name = "persistent1", + .offset = 0x8000000, + .size = 0x4000000 }, + { + .name = "persistent2", + .offset = 0xC000000, + .size = 0x4000000 + } }; struct ndfc_controller_settings warp_ndfc_settings = { @@ -67,19 +79,15 @@ static struct platform_device warp_ndfc_device = { .resource = &warp_ndfc, }; -static struct nand_ecclayout nand_oob_16 = { - .eccbytes = 3, - .eccpos = { 0, 1, 2, 3, 6, 7 }, - .oobfree = { {.offset = 8, .length = 16} } -}; - +/* Do NOT set the ecclayout: let it default so it is correct for both + * 64M and 256M flash chips. + */ static struct platform_nand_chip warp_nand_chip0 = { .nr_chips = 1, .chip_offset = CS_NAND_0, .nr_partitions = ARRAY_SIZE(nand_parts), .partitions = nand_parts, - .chip_delay = 50, - .ecclayout = &nand_oob_16, + .chip_delay = 20, .priv = &warp_chip0_settings, }; @@ -96,6 +104,23 @@ static struct platform_device warp_nand_device = { static int warp_setup_nand_flash(void) { + struct device_node *np; + + /* Try to detect a rev A based on NOR size. */ + np = of_find_compatible_node(NULL, NULL, "cfi-flash"); + if (np) { + struct property *pp; + + pp = of_find_property(np, "reg", NULL); + if (pp && (pp->length == 12)) { + u32 *v = pp->value; + if (v[2] == 0x4000000) + /* Rev A = 64M NAND */ + warp_nand_chip0.nr_partitions = 2; + } + of_node_put(np); + } + platform_device_register(&warp_ndfc_device); platform_device_register(&warp_nand_device); diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c index 39cf6150a72b..9565995cba7f 100644 --- a/arch/powerpc/platforms/44x/warp.c +++ b/arch/powerpc/platforms/44x/warp.c @@ -12,6 +12,9 @@ #include #include #include +#include +#include +#include #include #include @@ -27,6 +30,18 @@ static __initdata struct of_device_id warp_of_bus[] = { {}, }; +static __initdata struct i2c_board_info warp_i2c_info[] = { + { I2C_BOARD_INFO("ad7414", 0x4a) } +}; + +static int __init warp_arch_init(void) +{ + /* This should go away once support is moved to the dts. */ + i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info)); + return 0; +} +machine_arch_initcall(warp, warp_arch_init); + static int __init warp_device_probe(void) { of_platform_bus_probe(NULL, warp_of_bus, NULL); @@ -52,61 +67,232 @@ define_machine(warp) { }; -#define LED_GREEN (0x80000000 >> 0) -#define LED_RED (0x80000000 >> 1) +/* I am not sure this is the best place for this... */ +static int __init warp_post_info(void) +{ + struct device_node *np; + void __iomem *fpga; + u32 post1, post2; + + /* Sighhhh... POST information is in the sd area. */ + np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd"); + if (np == NULL) + return -ENOENT; + + fpga = of_iomap(np, 0); + of_node_put(np); + if (fpga == NULL) + return -ENOENT; + + post1 = in_be32(fpga + 0x40); + post2 = in_be32(fpga + 0x44); + + iounmap(fpga); + + if (post1 || post2) + printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2); + else + printk(KERN_INFO "Warp POST OK\n"); + + return 0; +} +machine_late_initcall(warp, warp_post_info); + + +#ifdef CONFIG_SENSORS_AD7414 + +static LIST_HEAD(dtm_shutdown_list); +static void __iomem *dtm_fpga; +static void __iomem *gpio_base; + + +struct dtm_shutdown { + struct list_head list; + void (*func)(void *arg); + void *arg; +}; -/* This is for the power LEDs 1 = on, 0 = off, -1 = leave alone */ -void warp_set_power_leds(int green, int red) +int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg) { - static void __iomem *gpio_base = NULL; - unsigned leds; - - if (gpio_base == NULL) { - struct device_node *np; - - /* Power LEDS are on the second GPIO controller */ - np = of_find_compatible_node(NULL, NULL, "ibm,gpio-440EP"); - if (np) - np = of_find_compatible_node(np, NULL, "ibm,gpio-440EP"); - if (np == NULL) { - printk(KERN_ERR __FILE__ ": Unable to find gpio\n"); - return; + struct dtm_shutdown *shutdown; + + shutdown = kmalloc(sizeof(struct dtm_shutdown), GFP_KERNEL); + if (shutdown == NULL) + return -ENOMEM; + + shutdown->func = func; + shutdown->arg = arg; + + list_add(&shutdown->list, &dtm_shutdown_list); + + return 0; +} + +int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg) +{ + struct dtm_shutdown *shutdown; + + list_for_each_entry(shutdown, &dtm_shutdown_list, list) + if (shutdown->func == func && shutdown->arg == arg) { + list_del(&shutdown->list); + kfree(shutdown); + return 0; + } + + return -EINVAL; +} + +static irqreturn_t temp_isr(int irq, void *context) +{ + struct dtm_shutdown *shutdown; + + local_irq_disable(); + + /* Run through the shutdown list. */ + list_for_each_entry(shutdown, &dtm_shutdown_list, list) + shutdown->func(shutdown->arg); + + printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n"); + + while (1) { + if (dtm_fpga) { + unsigned reset = in_be32(dtm_fpga + 0x14); + out_be32(dtm_fpga + 0x14, reset); } - gpio_base = of_iomap(np, 0); - of_node_put(np); - if (gpio_base == NULL) { - printk(KERN_ERR __FILE__ ": Unable to map gpio"); - return; + if (gpio_base) { + unsigned leds = in_be32(gpio_base); + + /* green off, red toggle */ + leds &= ~0x80000000; + leds ^= 0x40000000; + + out_be32(gpio_base, leds); } + + mdelay(500); + } +} + +static int pika_setup_leds(void) +{ + struct device_node *np; + const u32 *gpios; + int len; + + np = of_find_compatible_node(NULL, NULL, "linux,gpio-led"); + if (!np) { + printk(KERN_ERR __FILE__ ": Unable to find gpio-led\n"); + return -ENOENT; } - leds = in_be32(gpio_base); + gpios = of_get_property(np, "gpios", &len); + of_node_put(np); + if (!gpios || len < 4) { + printk(KERN_ERR __FILE__ + ": Unable to get gpios property (%d)\n", len); + return -ENOENT; + } - switch (green) { - case 0: leds &= ~LED_GREEN; break; - case 1: leds |= LED_GREEN; break; + np = of_find_node_by_phandle(gpios[0]); + if (!np) { + printk(KERN_ERR __FILE__ ": Unable to find gpio\n"); + return -ENOENT; } - switch (red) { - case 0: leds &= ~LED_RED; break; - case 1: leds |= LED_RED; break; + + gpio_base = of_iomap(np, 0); + of_node_put(np); + if (!gpio_base) { + printk(KERN_ERR __FILE__ ": Unable to map gpio"); + return -ENOMEM; } - out_be32(gpio_base, leds); + return 0; } -EXPORT_SYMBOL(warp_set_power_leds); +static void pika_setup_critical_temp(struct i2c_client *client) +{ + struct device_node *np; + int irq, rc; + + /* Do this before enabling critical temp interrupt since we + * may immediately interrupt. + */ + pika_setup_leds(); + + /* These registers are in 1 degree increments. */ + i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */ + i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */ + + np = of_find_compatible_node(NULL, NULL, "adi,ad7414"); + if (np == NULL) { + printk(KERN_ERR __FILE__ ": Unable to find ad7414\n"); + return; + } + + irq = irq_of_parse_and_map(np, 0); + of_node_put(np); + if (irq == NO_IRQ) { + printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n"); + return; + } + + rc = request_irq(irq, temp_isr, 0, "ad7414", NULL); + if (rc) { + printk(KERN_ERR __FILE__ + ": Unable to request ad7414 irq %d = %d\n", irq, rc); + return; + } +} + +static inline void pika_dtm_check_fan(void __iomem *fpga) +{ + static int fan_state; + u32 fan = in_be32(fpga + 0x34) & (1 << 14); + + if (fan_state != fan) { + fan_state = fan; + if (fan) + printk(KERN_WARNING "Fan rotation error detected." + " Please check hardware.\n"); + } +} -#ifdef CONFIG_SENSORS_AD7414 static int pika_dtm_thread(void __iomem *fpga) { - extern int ad7414_get_temp(int index); + struct i2c_adapter *adap; + struct i2c_client *client; + + /* We loop in case either driver was compiled as a module and + * has not been insmoded yet. + */ + while (!(adap = i2c_get_adapter(0))) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(HZ); + } + + while (1) { + list_for_each_entry(client, &adap->clients, list) + if (client->addr == 0x4a) + goto found_it; + + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(HZ); + } + +found_it: + i2c_put_adapter(adap); + + pika_setup_critical_temp(client); + + printk(KERN_INFO "PIKA DTM thread running.\n"); while (!kthread_should_stop()) { - int temp = ad7414_get_temp(0); + u16 temp = swab16(i2c_smbus_read_word_data(client, 0)); + out_be32(fpga + 0x20, temp); - out_be32(fpga, temp); + pika_dtm_check_fan(fpga); set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(HZ); @@ -115,37 +301,44 @@ static int pika_dtm_thread(void __iomem *fpga) return 0; } + static int __init pika_dtm_start(void) { struct task_struct *dtm_thread; struct device_node *np; - struct resource res; - void __iomem *fpga; np = of_find_compatible_node(NULL, NULL, "pika,fpga"); if (np == NULL) return -ENOENT; - /* We do not call of_iomap here since it would map in the entire - * fpga space, which is over 8k. - */ - if (of_address_to_resource(np, 0, &res)) { - of_node_put(np); - return -ENOENT; - } + dtm_fpga = of_iomap(np, 0); of_node_put(np); - - fpga = ioremap(res.start, 0x24); - if (fpga == NULL) + if (dtm_fpga == NULL) return -ENOENT; - dtm_thread = kthread_run(pika_dtm_thread, fpga + 0x20, "pika-dtm"); + dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm"); if (IS_ERR(dtm_thread)) { - iounmap(fpga); + iounmap(dtm_fpga); return PTR_ERR(dtm_thread); } return 0; } -device_initcall(pika_dtm_start); +machine_late_initcall(warp, pika_dtm_start); + +#else /* !CONFIG_SENSORS_AD7414 */ + +int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg) +{ + return 0; +} + +int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg) +{ + return 0; +} + #endif + +EXPORT_SYMBOL(pika_dtm_register_shutdown); +EXPORT_SYMBOL(pika_dtm_unregister_shutdown); -- cgit v1.2.3 From 0723abd0b2c9d4603b8c51d6615800c2439a328e Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 20 May 2008 07:59:23 -0500 Subject: [POWERPC] 4xx: Fix compiler warning on DCR_NATIVE only builds With the recent DCR code rework, we get a compiler warning about find_dcr_parent being defined but not used. This fixes it by only defining the function if CONFIG_PPC_DCR_MMIO is set. Signed-off-by: Josh Boyer --- arch/powerpc/sysdev/dcr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c index 5f39a79b0660..a8ba9983dd5a 100644 --- a/arch/powerpc/sysdev/dcr.c +++ b/arch/powerpc/sysdev/dcr.c @@ -23,6 +23,7 @@ #include #include +#ifdef CONFIG_PPC_DCR_MMIO static struct device_node *find_dcr_parent(struct device_node *node) { struct device_node *par, *tmp; @@ -41,6 +42,7 @@ static struct device_node *find_dcr_parent(struct device_node *node) } return par; } +#endif #if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) -- cgit v1.2.3 From c18f68e4d809a517ed8df540bac2993a4f14d9a4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 29 May 2008 18:53:05 +0200 Subject: [ALSA] Clean up sound/pci/ac97/Makefile Signed-off-by: Takashi Iwai --- sound/pci/ac97/Makefile | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/sound/pci/ac97/Makefile b/sound/pci/ac97/Makefile index 0be48b1a22d0..ae36950f2568 100644 --- a/sound/pci/ac97/Makefile +++ b/sound/pci/ac97/Makefile @@ -3,16 +3,11 @@ # Copyright (c) 2001 by Jaroslav Kysela # -snd-ac97-codec-objs := ac97_codec.o ac97_pcm.o - -ifneq ($(CONFIG_PROC_FS),) -snd-ac97-codec-objs += ac97_proc.o -endif +snd-ac97-codec-y := ac97_codec.o ac97_pcm.o +snd-ac97-codec-$(CONFIG_PROC_FS) += ac97_proc.o snd-ak4531-codec-objs := ak4531_codec.o # Toplevel Module Dependency obj-$(CONFIG_SND_AC97_CODEC) += snd-ac97-codec.o obj-$(CONFIG_SND_ENS1370) += snd-ak4531-codec.o - -obj-m := $(sort $(obj-m)) -- cgit v1.2.3 From 23ce1547638443f0053dd674e728062c48ff0e39 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 May 2008 09:22:22 +0200 Subject: [ALSA] Make ak4531 local to ens1370 driver The ak4531 module is used only by ens1370 driver (and unlikely that any other will use it ever). Let's make it local to ens1370. Signed-off-by: Takashi Iwai --- sound/pci/Makefile | 2 +- sound/pci/ac97/Makefile | 3 - sound/pci/ac97/ak4531_codec.c | 508 ------------------------------------------ sound/pci/ak4531_codec.c | 488 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 489 insertions(+), 512 deletions(-) delete mode 100644 sound/pci/ac97/ak4531_codec.c create mode 100644 sound/pci/ak4531_codec.c diff --git a/sound/pci/Makefile b/sound/pci/Makefile index 85ef14bc8056..65b25d221cd2 100644 --- a/sound/pci/Makefile +++ b/sound/pci/Makefile @@ -13,7 +13,7 @@ snd-bt87x-objs := bt87x.o snd-cmipci-objs := cmipci.o snd-cs4281-objs := cs4281.o snd-cs5530-objs := cs5530.o -snd-ens1370-objs := ens1370.o +snd-ens1370-objs := ens1370.o ak4531_codec.o snd-ens1371-objs := ens1371.o snd-es1938-objs := es1938.o snd-es1968-objs := es1968.o diff --git a/sound/pci/ac97/Makefile b/sound/pci/ac97/Makefile index ae36950f2568..41fa322f0971 100644 --- a/sound/pci/ac97/Makefile +++ b/sound/pci/ac97/Makefile @@ -6,8 +6,5 @@ snd-ac97-codec-y := ac97_codec.o ac97_pcm.o snd-ac97-codec-$(CONFIG_PROC_FS) += ac97_proc.o -snd-ak4531-codec-objs := ak4531_codec.o - # Toplevel Module Dependency obj-$(CONFIG_SND_AC97_CODEC) += snd-ac97-codec.o -obj-$(CONFIG_SND_ENS1370) += snd-ak4531-codec.o diff --git a/sound/pci/ac97/ak4531_codec.c b/sound/pci/ac97/ak4531_codec.c deleted file mode 100644 index c0c1633999ea..000000000000 --- a/sound/pci/ac97/ak4531_codec.c +++ /dev/null @@ -1,508 +0,0 @@ -/* - * Copyright (c) by Jaroslav Kysela - * Universal routines for AK4531 codec - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include -#include -#include - -#include -#include -#include - -MODULE_AUTHOR("Jaroslav Kysela "); -MODULE_DESCRIPTION("Universal routines for AK4531 codec"); -MODULE_LICENSE("GPL"); - -#ifdef CONFIG_PROC_FS -static void snd_ak4531_proc_init(struct snd_card *card, struct snd_ak4531 *ak4531); -#else -#define snd_ak4531_proc_init(card,ak) -#endif - -/* - * - */ - -#if 0 - -static void snd_ak4531_dump(struct snd_ak4531 *ak4531) -{ - int idx; - - for (idx = 0; idx < 0x19; idx++) - printk("ak4531 0x%x: 0x%x\n", idx, ak4531->regs[idx]); -} - -#endif - -/* - * - */ - -#define AK4531_SINGLE(xname, xindex, reg, shift, mask, invert) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ - .info = snd_ak4531_info_single, \ - .get = snd_ak4531_get_single, .put = snd_ak4531_put_single, \ - .private_value = reg | (shift << 16) | (mask << 24) | (invert << 22) } -#define AK4531_SINGLE_TLV(xname, xindex, reg, shift, mask, invert, xtlv) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \ - .name = xname, .index = xindex, \ - .info = snd_ak4531_info_single, \ - .get = snd_ak4531_get_single, .put = snd_ak4531_put_single, \ - .private_value = reg | (shift << 16) | (mask << 24) | (invert << 22), \ - .tlv = { .p = (xtlv) } } - -static int snd_ak4531_info_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) -{ - int mask = (kcontrol->private_value >> 24) & 0xff; - - uinfo->type = mask == 1 ? SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER; - uinfo->count = 1; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = mask; - return 0; -} - -static int snd_ak4531_get_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) -{ - struct snd_ak4531 *ak4531 = snd_kcontrol_chip(kcontrol); - int reg = kcontrol->private_value & 0xff; - int shift = (kcontrol->private_value >> 16) & 0x07; - int mask = (kcontrol->private_value >> 24) & 0xff; - int invert = (kcontrol->private_value >> 22) & 1; - int val; - - mutex_lock(&ak4531->reg_mutex); - val = (ak4531->regs[reg] >> shift) & mask; - mutex_unlock(&ak4531->reg_mutex); - if (invert) { - val = mask - val; - } - ucontrol->value.integer.value[0] = val; - return 0; -} - -static int snd_ak4531_put_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) -{ - struct snd_ak4531 *ak4531 = snd_kcontrol_chip(kcontrol); - int reg = kcontrol->private_value & 0xff; - int shift = (kcontrol->private_value >> 16) & 0x07; - int mask = (kcontrol->private_value >> 24) & 0xff; - int invert = (kcontrol->private_value >> 22) & 1; - int change; - int val; - - val = ucontrol->value.integer.value[0] & mask; - if (invert) { - val = mask - val; - } - val <<= shift; - mutex_lock(&ak4531->reg_mutex); - val = (ak4531->regs[reg] & ~(mask << shift)) | val; - change = val != ak4531->regs[reg]; - ak4531->write(ak4531, reg, ak4531->regs[reg] = val); - mutex_unlock(&ak4531->reg_mutex); - return change; -} - -#define AK4531_DOUBLE(xname, xindex, left_reg, right_reg, left_shift, right_shift, mask, invert) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ - .info = snd_ak4531_info_double, \ - .get = snd_ak4531_get_double, .put = snd_ak4531_put_double, \ - .private_value = left_reg | (right_reg << 8) | (left_shift << 16) | (right_shift << 19) | (mask << 24) | (invert << 22) } -#define AK4531_DOUBLE_TLV(xname, xindex, left_reg, right_reg, left_shift, right_shift, mask, invert, xtlv) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ - .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \ - .name = xname, .index = xindex, \ - .info = snd_ak4531_info_double, \ - .get = snd_ak4531_get_double, .put = snd_ak4531_put_double, \ - .private_value = left_reg | (right_reg << 8) | (left_shift << 16) | (right_shift << 19) | (mask << 24) | (invert << 22), \ - .tlv = { .p = (xtlv) } } - -static int snd_ak4531_info_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) -{ - int mask = (kcontrol->private_value >> 24) & 0xff; - - uinfo->type = mask == 1 ? SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER; - uinfo->count = 2; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = mask; - return 0; -} - -static int snd_ak4531_get_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) -{ - struct snd_ak4531 *ak4531 = snd_kcontrol_chip(kcontrol); - int left_reg = kcontrol->private_value & 0xff; - int right_reg = (kcontrol->private_value >> 8) & 0xff; - int left_shift = (kcontrol->private_value >> 16) & 0x07; - int right_shift = (kcontrol->private_value >> 19) & 0x07; - int mask = (kcontrol->private_value >> 24) & 0xff; - int invert = (kcontrol->private_value >> 22) & 1; - int left, right; - - mutex_lock(&ak4531->reg_mutex); - left = (ak4531->regs[left_reg] >> left_shift) & mask; - right = (ak4531->regs[right_reg] >> right_shift) & mask; - mutex_unlock(&ak4531->reg_mutex); - if (invert) { - left = mask - left; - right = mask - right; - } - ucontrol->value.integer.value[0] = left; - ucontrol->value.integer.value[1] = right; - return 0; -} - -static int snd_ak4531_put_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) -{ - struct snd_ak4531 *ak4531 = snd_kcontrol_chip(kcontrol); - int left_reg = kcontrol->private_value & 0xff; - int right_reg = (kcontrol->private_value >> 8) & 0xff; - int left_shift = (kcontrol->private_value >> 16) & 0x07; - int right_shift = (kcontrol->private_value >> 19) & 0x07; - int mask = (kcontrol->private_value >> 24) & 0xff; - int invert = (kcontrol->private_value >> 22) & 1; - int change; - int left, right; - - left = ucontrol->value.integer.value[0] & mask; - right = ucontrol->value.integer.value[1] & mask; - if (invert) { - left = mask - left; - right = mask - right; - } - left <<= left_shift; - right <<= right_shift; - mutex_lock(&ak4531->reg_mutex); - if (left_reg == right_reg) { - left = (ak4531->regs[left_reg] & ~((mask << left_shift) | (mask << right_shift))) | left | right; - change = left != ak4531->regs[left_reg]; - ak4531->write(ak4531, left_reg, ak4531->regs[left_reg] = left); - } else { - left = (ak4531->regs[left_reg] & ~(mask << left_shift)) | left; - right = (ak4531->regs[right_reg] & ~(mask << right_shift)) | right; - change = left != ak4531->regs[left_reg] || right != ak4531->regs[right_reg]; - ak4531->write(ak4531, left_reg, ak4531->regs[left_reg] = left); - ak4531->write(ak4531, right_reg, ak4531->regs[right_reg] = right); - } - mutex_unlock(&ak4531->reg_mutex); - return change; -} - -#define AK4531_INPUT_SW(xname, xindex, reg1, reg2, left_shift, right_shift) \ -{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ - .info = snd_ak4531_info_input_sw, \ - .get = snd_ak4531_get_input_sw, .put = snd_ak4531_put_input_sw, \ - .private_value = reg1 | (reg2 << 8) | (left_shift << 16) | (right_shift << 24) } - -static int snd_ak4531_info_input_sw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) -{ - uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; - uinfo->count = 4; - uinfo->value.integer.min = 0; - uinfo->value.integer.max = 1; - return 0; -} - -static int snd_ak4531_get_input_sw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) -{ - struct snd_ak4531 *ak4531 = snd_kcontrol_chip(kcontrol); - int reg1 = kcontrol->private_value & 0xff; - int reg2 = (kcontrol->private_value >> 8) & 0xff; - int left_shift = (kcontrol->private_value >> 16) & 0x0f; - int right_shift = (kcontrol->private_value >> 24) & 0x0f; - - mutex_lock(&ak4531->reg_mutex); - ucontrol->value.integer.value[0] = (ak4531->regs[reg1] >> left_shift) & 1; - ucontrol->value.integer.value[1] = (ak4531->regs[reg2] >> left_shift) & 1; - ucontrol->value.integer.value[2] = (ak4531->regs[reg1] >> right_shift) & 1; - ucontrol->value.integer.value[3] = (ak4531->regs[reg2] >> right_shift) & 1; - mutex_unlock(&ak4531->reg_mutex); - return 0; -} - -static int snd_ak4531_put_input_sw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) -{ - struct snd_ak4531 *ak4531 = snd_kcontrol_chip(kcontrol); - int reg1 = kcontrol->private_value & 0xff; - int reg2 = (kcontrol->private_value >> 8) & 0xff; - int left_shift = (kcontrol->private_value >> 16) & 0x0f; - int right_shift = (kcontrol->private_value >> 24) & 0x0f; - int change; - int val1, val2; - - mutex_lock(&ak4531->reg_mutex); - val1 = ak4531->regs[reg1] & ~((1 << left_shift) | (1 << right_shift)); - val2 = ak4531->regs[reg2] & ~((1 << left_shift) | (1 << right_shift)); - val1 |= (ucontrol->value.integer.value[0] & 1) << left_shift; - val2 |= (ucontrol->value.integer.value[1] & 1) << left_shift; - val1 |= (ucontrol->value.integer.value[2] & 1) << right_shift; - val2 |= (ucontrol->value.integer.value[3] & 1) << right_shift; - change = val1 != ak4531->regs[reg1] || val2 != ak4531->regs[reg2]; - ak4531->write(ak4531, reg1, ak4531->regs[reg1] = val1); - ak4531->write(ak4531, reg2, ak4531->regs[reg2] = val2); - mutex_unlock(&ak4531->reg_mutex); - return change; -} - -static const DECLARE_TLV_DB_SCALE(db_scale_master, -6200, 200, 0); -static const DECLARE_TLV_DB_SCALE(db_scale_mono, -2800, 400, 0); -static const DECLARE_TLV_DB_SCALE(db_scale_input, -5000, 200, 0); - -static struct snd_kcontrol_new snd_ak4531_controls[] = { - -AK4531_DOUBLE_TLV("Master Playback Switch", 0, - AK4531_LMASTER, AK4531_RMASTER, 7, 7, 1, 1, - db_scale_master), -AK4531_DOUBLE("Master Playback Volume", 0, AK4531_LMASTER, AK4531_RMASTER, 0, 0, 0x1f, 1), - -AK4531_SINGLE_TLV("Master Mono Playback Switch", 0, AK4531_MONO_OUT, 7, 1, 1, - db_scale_mono), -AK4531_SINGLE("Master Mono Playback Volume", 0, AK4531_MONO_OUT, 0, 0x07, 1), - -AK4531_DOUBLE("PCM Switch", 0, AK4531_LVOICE, AK4531_RVOICE, 7, 7, 1, 1), -AK4531_DOUBLE_TLV("PCM Volume", 0, AK4531_LVOICE, AK4531_RVOICE, 0, 0, 0x1f, 1, - db_scale_input), -AK4531_DOUBLE("PCM Playback Switch", 0, AK4531_OUT_SW2, AK4531_OUT_SW2, 3, 2, 1, 0), -AK4531_DOUBLE("PCM Capture Switch", 0, AK4531_LIN_SW2, AK4531_RIN_SW2, 2, 2, 1, 0), - -AK4531_DOUBLE("PCM Switch", 1, AK4531_LFM, AK4531_RFM, 7, 7, 1, 1), -AK4531_DOUBLE_TLV("PCM Volume", 1, AK4531_LFM, AK4531_RFM, 0, 0, 0x1f, 1, - db_scale_input), -AK4531_DOUBLE("PCM Playback Switch", 1, AK4531_OUT_SW1, AK4531_OUT_SW1, 6, 5, 1, 0), -AK4531_INPUT_SW("PCM Capture Route", 1, AK4531_LIN_SW1, AK4531_RIN_SW1, 6, 5), - -AK4531_DOUBLE("CD Switch", 0, AK4531_LCD, AK4531_RCD, 7, 7, 1, 1), -AK4531_DOUBLE_TLV("CD Volume", 0, AK4531_LCD, AK4531_RCD, 0, 0, 0x1f, 1, - db_scale_input), -AK4531_DOUBLE("CD Playback Switch", 0, AK4531_OUT_SW1, AK4531_OUT_SW1, 2, 1, 1, 0), -AK4531_INPUT_SW("CD Capture Route", 0, AK4531_LIN_SW1, AK4531_RIN_SW1, 2, 1), - -AK4531_DOUBLE("Line Switch", 0, AK4531_LLINE, AK4531_RLINE, 7, 7, 1, 1), -AK4531_DOUBLE_TLV("Line Volume", 0, AK4531_LLINE, AK4531_RLINE, 0, 0, 0x1f, 1, - db_scale_input), -AK4531_DOUBLE("Line Playback Switch", 0, AK4531_OUT_SW1, AK4531_OUT_SW1, 4, 3, 1, 0), -AK4531_INPUT_SW("Line Capture Route", 0, AK4531_LIN_SW1, AK4531_RIN_SW1, 4, 3), - -AK4531_DOUBLE("Aux Switch", 0, AK4531_LAUXA, AK4531_RAUXA, 7, 7, 1, 1), -AK4531_DOUBLE_TLV("Aux Volume", 0, AK4531_LAUXA, AK4531_RAUXA, 0, 0, 0x1f, 1, - db_scale_input), -AK4531_DOUBLE("Aux Playback Switch", 0, AK4531_OUT_SW2, AK4531_OUT_SW2, 5, 4, 1, 0), -AK4531_INPUT_SW("Aux Capture Route", 0, AK4531_LIN_SW2, AK4531_RIN_SW2, 4, 3), - -AK4531_SINGLE("Mono Switch", 0, AK4531_MONO1, 7, 1, 1), -AK4531_SINGLE_TLV("Mono Volume", 0, AK4531_MONO1, 0, 0x1f, 1, db_scale_input), -AK4531_SINGLE("Mono Playback Switch", 0, AK4531_OUT_SW2, 0, 1, 0), -AK4531_DOUBLE("Mono Capture Switch", 0, AK4531_LIN_SW2, AK4531_RIN_SW2, 0, 0, 1, 0), - -AK4531_SINGLE("Mono Switch", 1, AK4531_MONO2, 7, 1, 1), -AK4531_SINGLE_TLV("Mono Volume", 1, AK4531_MONO2, 0, 0x1f, 1, db_scale_input), -AK4531_SINGLE("Mono Playback Switch", 1, AK4531_OUT_SW2, 1, 1, 0), -AK4531_DOUBLE("Mono Capture Switch", 1, AK4531_LIN_SW2, AK4531_RIN_SW2, 1, 1, 1, 0), - -AK4531_SINGLE_TLV("Mic Volume", 0, AK4531_MIC, 0, 0x1f, 1, db_scale_input), -AK4531_SINGLE("Mic Switch", 0, AK4531_MIC, 7, 1, 1), -AK4531_SINGLE("Mic Playback Switch", 0, AK4531_OUT_SW1, 0, 1, 0), -AK4531_DOUBLE("Mic Capture Switch", 0, AK4531_LIN_SW1, AK4531_RIN_SW1, 0, 0, 1, 0), - -AK4531_DOUBLE("Mic Bypass Capture Switch", 0, AK4531_LIN_SW2, AK4531_RIN_SW2, 7, 7, 1, 0), -AK4531_DOUBLE("Mono1 Bypass Capture Switch", 0, AK4531_LIN_SW2, AK4531_RIN_SW2, 6, 6, 1, 0), -AK4531_DOUBLE("Mono2 Bypass Capture Switch", 0, AK4531_LIN_SW2, AK4531_RIN_SW2, 5, 5, 1, 0), - -AK4531_SINGLE("AD Input Select", 0, AK4531_AD_IN, 0, 1, 0), -AK4531_SINGLE("Mic Boost (+30dB)", 0, AK4531_MIC_GAIN, 0, 1, 0) -}; - -static int snd_ak4531_free(struct snd_ak4531 *ak4531) -{ - if (ak4531) { - if (ak4531->private_free) - ak4531->private_free(ak4531); - kfree(ak4531); - } - return 0; -} - -static int snd_ak4531_dev_free(struct snd_device *device) -{ - struct snd_ak4531 *ak4531 = device->device_data; - return snd_ak4531_free(ak4531); -} - -static u8 snd_ak4531_initial_map[0x19 + 1] = { - 0x9f, /* 00: Master Volume Lch */ - 0x9f, /* 01: Master Volume Rch */ - 0x9f, /* 02: Voice Volume Lch */ - 0x9f, /* 03: Voice Volume Rch */ - 0x9f, /* 04: FM Volume Lch */ - 0x9f, /* 05: FM Volume Rch */ - 0x9f, /* 06: CD Audio Volume Lch */ - 0x9f, /* 07: CD Audio Volume Rch */ - 0x9f, /* 08: Line Volume Lch */ - 0x9f, /* 09: Line Volume Rch */ - 0x9f, /* 0a: Aux Volume Lch */ - 0x9f, /* 0b: Aux Volume Rch */ - 0x9f, /* 0c: Mono1 Volume */ - 0x9f, /* 0d: Mono2 Volume */ - 0x9f, /* 0e: Mic Volume */ - 0x87, /* 0f: Mono-out Volume */ - 0x00, /* 10: Output Mixer SW1 */ - 0x00, /* 11: Output Mixer SW2 */ - 0x00, /* 12: Lch Input Mixer SW1 */ - 0x00, /* 13: Rch Input Mixer SW1 */ - 0x00, /* 14: Lch Input Mixer SW2 */ - 0x00, /* 15: Rch Input Mixer SW2 */ - 0x00, /* 16: Reset & Power Down */ - 0x00, /* 17: Clock Select */ - 0x00, /* 18: AD Input Select */ - 0x01 /* 19: Mic Amp Setup */ -}; - -int snd_ak4531_mixer(struct snd_card *card, struct snd_ak4531 *_ak4531, - struct snd_ak4531 **rak4531) -{ - unsigned int idx; - int err; - struct snd_ak4531 *ak4531; - static struct snd_device_ops ops = { - .dev_free = snd_ak4531_dev_free, - }; - - snd_assert(rak4531 != NULL, return -EINVAL); - *rak4531 = NULL; - snd_assert(card != NULL && _ak4531 != NULL, return -EINVAL); - ak4531 = kzalloc(sizeof(*ak4531), GFP_KERNEL); - if (ak4531 == NULL) - return -ENOMEM; - *ak4531 = *_ak4531; - mutex_init(&ak4531->reg_mutex); - if ((err = snd_component_add(card, "AK4531")) < 0) { - snd_ak4531_free(ak4531); - return err; - } - strcpy(card->mixername, "Asahi Kasei AK4531"); - ak4531->write(ak4531, AK4531_RESET, 0x03); /* no RST, PD */ - udelay(100); - ak4531->write(ak4531, AK4531_CLOCK, 0x00); /* CODEC ADC and CODEC DAC use {LR,B}CLK2 and run off LRCLK2 PLL */ - for (idx = 0; idx <= 0x19; idx++) { - if (idx == AK4531_RESET || idx == AK4531_CLOCK) - continue; - ak4531->write(ak4531, idx, ak4531->regs[idx] = snd_ak4531_initial_map[idx]); /* recording source is mixer */ - } - for (idx = 0; idx < ARRAY_SIZE(snd_ak4531_controls); idx++) { - if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_ak4531_controls[idx], ak4531))) < 0) { - snd_ak4531_free(ak4531); - return err; - } - } - snd_ak4531_proc_init(card, ak4531); - if ((err = snd_device_new(card, SNDRV_DEV_CODEC, ak4531, &ops)) < 0) { - snd_ak4531_free(ak4531); - return err; - } - -#if 0 - snd_ak4531_dump(ak4531); -#endif - *rak4531 = ak4531; - return 0; -} - -/* - * power management - */ -#ifdef CONFIG_PM -void snd_ak4531_suspend(struct snd_ak4531 *ak4531) -{ - /* mute */ - ak4531->write(ak4531, AK4531_LMASTER, 0x9f); - ak4531->write(ak4531, AK4531_RMASTER, 0x9f); - /* powerdown */ - ak4531->write(ak4531, AK4531_RESET, 0x01); -} - -void snd_ak4531_resume(struct snd_ak4531 *ak4531) -{ - int idx; - - /* initialize */ - ak4531->write(ak4531, AK4531_RESET, 0x03); - udelay(100); - ak4531->write(ak4531, AK4531_CLOCK, 0x00); - /* restore mixer registers */ - for (idx = 0; idx <= 0x19; idx++) { - if (idx == AK4531_RESET || idx == AK4531_CLOCK) - continue; - ak4531->write(ak4531, idx, ak4531->regs[idx]); - } -} -#endif - -#ifdef CONFIG_PROC_FS -/* - * /proc interface - */ - -static void snd_ak4531_proc_read(struct snd_info_entry *entry, - struct snd_info_buffer *buffer) -{ - struct snd_ak4531 *ak4531 = entry->private_data; - - snd_iprintf(buffer, "Asahi Kasei AK4531\n\n"); - snd_iprintf(buffer, "Recording source : %s\n" - "MIC gain : %s\n", - ak4531->regs[AK4531_AD_IN] & 1 ? "external" : "mixer", - ak4531->regs[AK4531_MIC_GAIN] & 1 ? "+30dB" : "+0dB"); -} - -static void snd_ak4531_proc_init(struct snd_card *card, struct snd_ak4531 *ak4531) -{ - struct snd_info_entry *entry; - - if (! snd_card_proc_new(card, "ak4531", &entry)) - snd_info_set_text_ops(entry, ak4531, snd_ak4531_proc_read); -} -#endif - -EXPORT_SYMBOL(snd_ak4531_mixer); -#ifdef CONFIG_PM -EXPORT_SYMBOL(snd_ak4531_suspend); -EXPORT_SYMBOL(snd_ak4531_resume); -#endif - -/* - * INIT part - */ - -static int __init alsa_ak4531_init(void) -{ - return 0; -} - -static void __exit alsa_ak4531_exit(void) -{ -} - -module_init(alsa_ak4531_init) -module_exit(alsa_ak4531_exit) diff --git a/sound/pci/ak4531_codec.c b/sound/pci/ak4531_codec.c new file mode 100644 index 000000000000..6a99eed2d8b6 --- /dev/null +++ b/sound/pci/ak4531_codec.c @@ -0,0 +1,488 @@ +/* + * Copyright (c) by Jaroslav Kysela + * Universal routines for AK4531 codec + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +MODULE_AUTHOR("Jaroslav Kysela "); +MODULE_DESCRIPTION("Universal routines for AK4531 codec"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_PROC_FS +static void snd_ak4531_proc_init(struct snd_card *card, struct snd_ak4531 *ak4531); +#else +#define snd_ak4531_proc_init(card,ak) +#endif + +/* + * + */ + +#if 0 + +static void snd_ak4531_dump(struct snd_ak4531 *ak4531) +{ + int idx; + + for (idx = 0; idx < 0x19; idx++) + printk("ak4531 0x%x: 0x%x\n", idx, ak4531->regs[idx]); +} + +#endif + +/* + * + */ + +#define AK4531_SINGLE(xname, xindex, reg, shift, mask, invert) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ + .info = snd_ak4531_info_single, \ + .get = snd_ak4531_get_single, .put = snd_ak4531_put_single, \ + .private_value = reg | (shift << 16) | (mask << 24) | (invert << 22) } +#define AK4531_SINGLE_TLV(xname, xindex, reg, shift, mask, invert, xtlv) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \ + .name = xname, .index = xindex, \ + .info = snd_ak4531_info_single, \ + .get = snd_ak4531_get_single, .put = snd_ak4531_put_single, \ + .private_value = reg | (shift << 16) | (mask << 24) | (invert << 22), \ + .tlv = { .p = (xtlv) } } + +static int snd_ak4531_info_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +{ + int mask = (kcontrol->private_value >> 24) & 0xff; + + uinfo->type = mask == 1 ? SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = mask; + return 0; +} + +static int snd_ak4531_get_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +{ + struct snd_ak4531 *ak4531 = snd_kcontrol_chip(kcontrol); + int reg = kcontrol->private_value & 0xff; + int shift = (kcontrol->private_value >> 16) & 0x07; + int mask = (kcontrol->private_value >> 24) & 0xff; + int invert = (kcontrol->private_value >> 22) & 1; + int val; + + mutex_lock(&ak4531->reg_mutex); + val = (ak4531->regs[reg] >> shift) & mask; + mutex_unlock(&ak4531->reg_mutex); + if (invert) { + val = mask - val; + } + ucontrol->value.integer.value[0] = val; + return 0; +} + +static int snd_ak4531_put_single(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +{ + struct snd_ak4531 *ak4531 = snd_kcontrol_chip(kcontrol); + int reg = kcontrol->private_value & 0xff; + int shift = (kcontrol->private_value >> 16) & 0x07; + int mask = (kcontrol->private_value >> 24) & 0xff; + int invert = (kcontrol->private_value >> 22) & 1; + int change; + int val; + + val = ucontrol->value.integer.value[0] & mask; + if (invert) { + val = mask - val; + } + val <<= shift; + mutex_lock(&ak4531->reg_mutex); + val = (ak4531->regs[reg] & ~(mask << shift)) | val; + change = val != ak4531->regs[reg]; + ak4531->write(ak4531, reg, ak4531->regs[reg] = val); + mutex_unlock(&ak4531->reg_mutex); + return change; +} + +#define AK4531_DOUBLE(xname, xindex, left_reg, right_reg, left_shift, right_shift, mask, invert) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ + .info = snd_ak4531_info_double, \ + .get = snd_ak4531_get_double, .put = snd_ak4531_put_double, \ + .private_value = left_reg | (right_reg << 8) | (left_shift << 16) | (right_shift << 19) | (mask << 24) | (invert << 22) } +#define AK4531_DOUBLE_TLV(xname, xindex, left_reg, right_reg, left_shift, right_shift, mask, invert, xtlv) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \ + .name = xname, .index = xindex, \ + .info = snd_ak4531_info_double, \ + .get = snd_ak4531_get_double, .put = snd_ak4531_put_double, \ + .private_value = left_reg | (right_reg << 8) | (left_shift << 16) | (right_shift << 19) | (mask << 24) | (invert << 22), \ + .tlv = { .p = (xtlv) } } + +static int snd_ak4531_info_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +{ + int mask = (kcontrol->private_value >> 24) & 0xff; + + uinfo->type = mask == 1 ? SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = mask; + return 0; +} + +static int snd_ak4531_get_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +{ + struct snd_ak4531 *ak4531 = snd_kcontrol_chip(kcontrol); + int left_reg = kcontrol->private_value & 0xff; + int right_reg = (kcontrol->private_value >> 8) & 0xff; + int left_shift = (kcontrol->private_value >> 16) & 0x07; + int right_shift = (kcontrol->private_value >> 19) & 0x07; + int mask = (kcontrol->private_value >> 24) & 0xff; + int invert = (kcontrol->private_value >> 22) & 1; + int left, right; + + mutex_lock(&ak4531->reg_mutex); + left = (ak4531->regs[left_reg] >> left_shift) & mask; + right = (ak4531->regs[right_reg] >> right_shift) & mask; + mutex_unlock(&ak4531->reg_mutex); + if (invert) { + left = mask - left; + right = mask - right; + } + ucontrol->value.integer.value[0] = left; + ucontrol->value.integer.value[1] = right; + return 0; +} + +static int snd_ak4531_put_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +{ + struct snd_ak4531 *ak4531 = snd_kcontrol_chip(kcontrol); + int left_reg = kcontrol->private_value & 0xff; + int right_reg = (kcontrol->private_value >> 8) & 0xff; + int left_shift = (kcontrol->private_value >> 16) & 0x07; + int right_shift = (kcontrol->private_value >> 19) & 0x07; + int mask = (kcontrol->private_value >> 24) & 0xff; + int invert = (kcontrol->private_value >> 22) & 1; + int change; + int left, right; + + left = ucontrol->value.integer.value[0] & mask; + right = ucontrol->value.integer.value[1] & mask; + if (invert) { + left = mask - left; + right = mask - right; + } + left <<= left_shift; + right <<= right_shift; + mutex_lock(&ak4531->reg_mutex); + if (left_reg == right_reg) { + left = (ak4531->regs[left_reg] & ~((mask << left_shift) | (mask << right_shift))) | left | right; + change = left != ak4531->regs[left_reg]; + ak4531->write(ak4531, left_reg, ak4531->regs[left_reg] = left); + } else { + left = (ak4531->regs[left_reg] & ~(mask << left_shift)) | left; + right = (ak4531->regs[right_reg] & ~(mask << right_shift)) | right; + change = left != ak4531->regs[left_reg] || right != ak4531->regs[right_reg]; + ak4531->write(ak4531, left_reg, ak4531->regs[left_reg] = left); + ak4531->write(ak4531, right_reg, ak4531->regs[right_reg] = right); + } + mutex_unlock(&ak4531->reg_mutex); + return change; +} + +#define AK4531_INPUT_SW(xname, xindex, reg1, reg2, left_shift, right_shift) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ + .info = snd_ak4531_info_input_sw, \ + .get = snd_ak4531_get_input_sw, .put = snd_ak4531_put_input_sw, \ + .private_value = reg1 | (reg2 << 8) | (left_shift << 16) | (right_shift << 24) } + +static int snd_ak4531_info_input_sw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 4; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +static int snd_ak4531_get_input_sw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +{ + struct snd_ak4531 *ak4531 = snd_kcontrol_chip(kcontrol); + int reg1 = kcontrol->private_value & 0xff; + int reg2 = (kcontrol->private_value >> 8) & 0xff; + int left_shift = (kcontrol->private_value >> 16) & 0x0f; + int right_shift = (kcontrol->private_value >> 24) & 0x0f; + + mutex_lock(&ak4531->reg_mutex); + ucontrol->value.integer.value[0] = (ak4531->regs[reg1] >> left_shift) & 1; + ucontrol->value.integer.value[1] = (ak4531->regs[reg2] >> left_shift) & 1; + ucontrol->value.integer.value[2] = (ak4531->regs[reg1] >> right_shift) & 1; + ucontrol->value.integer.value[3] = (ak4531->regs[reg2] >> right_shift) & 1; + mutex_unlock(&ak4531->reg_mutex); + return 0; +} + +static int snd_ak4531_put_input_sw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) +{ + struct snd_ak4531 *ak4531 = snd_kcontrol_chip(kcontrol); + int reg1 = kcontrol->private_value & 0xff; + int reg2 = (kcontrol->private_value >> 8) & 0xff; + int left_shift = (kcontrol->private_value >> 16) & 0x0f; + int right_shift = (kcontrol->private_value >> 24) & 0x0f; + int change; + int val1, val2; + + mutex_lock(&ak4531->reg_mutex); + val1 = ak4531->regs[reg1] & ~((1 << left_shift) | (1 << right_shift)); + val2 = ak4531->regs[reg2] & ~((1 << left_shift) | (1 << right_shift)); + val1 |= (ucontrol->value.integer.value[0] & 1) << left_shift; + val2 |= (ucontrol->value.integer.value[1] & 1) << left_shift; + val1 |= (ucontrol->value.integer.value[2] & 1) << right_shift; + val2 |= (ucontrol->value.integer.value[3] & 1) << right_shift; + change = val1 != ak4531->regs[reg1] || val2 != ak4531->regs[reg2]; + ak4531->write(ak4531, reg1, ak4531->regs[reg1] = val1); + ak4531->write(ak4531, reg2, ak4531->regs[reg2] = val2); + mutex_unlock(&ak4531->reg_mutex); + return change; +} + +static const DECLARE_TLV_DB_SCALE(db_scale_master, -6200, 200, 0); +static const DECLARE_TLV_DB_SCALE(db_scale_mono, -2800, 400, 0); +static const DECLARE_TLV_DB_SCALE(db_scale_input, -5000, 200, 0); + +static struct snd_kcontrol_new snd_ak4531_controls[] __devinitdata = { + +AK4531_DOUBLE_TLV("Master Playback Switch", 0, + AK4531_LMASTER, AK4531_RMASTER, 7, 7, 1, 1, + db_scale_master), +AK4531_DOUBLE("Master Playback Volume", 0, AK4531_LMASTER, AK4531_RMASTER, 0, 0, 0x1f, 1), + +AK4531_SINGLE_TLV("Master Mono Playback Switch", 0, AK4531_MONO_OUT, 7, 1, 1, + db_scale_mono), +AK4531_SINGLE("Master Mono Playback Volume", 0, AK4531_MONO_OUT, 0, 0x07, 1), + +AK4531_DOUBLE("PCM Switch", 0, AK4531_LVOICE, AK4531_RVOICE, 7, 7, 1, 1), +AK4531_DOUBLE_TLV("PCM Volume", 0, AK4531_LVOICE, AK4531_RVOICE, 0, 0, 0x1f, 1, + db_scale_input), +AK4531_DOUBLE("PCM Playback Switch", 0, AK4531_OUT_SW2, AK4531_OUT_SW2, 3, 2, 1, 0), +AK4531_DOUBLE("PCM Capture Switch", 0, AK4531_LIN_SW2, AK4531_RIN_SW2, 2, 2, 1, 0), + +AK4531_DOUBLE("PCM Switch", 1, AK4531_LFM, AK4531_RFM, 7, 7, 1, 1), +AK4531_DOUBLE_TLV("PCM Volume", 1, AK4531_LFM, AK4531_RFM, 0, 0, 0x1f, 1, + db_scale_input), +AK4531_DOUBLE("PCM Playback Switch", 1, AK4531_OUT_SW1, AK4531_OUT_SW1, 6, 5, 1, 0), +AK4531_INPUT_SW("PCM Capture Route", 1, AK4531_LIN_SW1, AK4531_RIN_SW1, 6, 5), + +AK4531_DOUBLE("CD Switch", 0, AK4531_LCD, AK4531_RCD, 7, 7, 1, 1), +AK4531_DOUBLE_TLV("CD Volume", 0, AK4531_LCD, AK4531_RCD, 0, 0, 0x1f, 1, + db_scale_input), +AK4531_DOUBLE("CD Playback Switch", 0, AK4531_OUT_SW1, AK4531_OUT_SW1, 2, 1, 1, 0), +AK4531_INPUT_SW("CD Capture Route", 0, AK4531_LIN_SW1, AK4531_RIN_SW1, 2, 1), + +AK4531_DOUBLE("Line Switch", 0, AK4531_LLINE, AK4531_RLINE, 7, 7, 1, 1), +AK4531_DOUBLE_TLV("Line Volume", 0, AK4531_LLINE, AK4531_RLINE, 0, 0, 0x1f, 1, + db_scale_input), +AK4531_DOUBLE("Line Playback Switch", 0, AK4531_OUT_SW1, AK4531_OUT_SW1, 4, 3, 1, 0), +AK4531_INPUT_SW("Line Capture Route", 0, AK4531_LIN_SW1, AK4531_RIN_SW1, 4, 3), + +AK4531_DOUBLE("Aux Switch", 0, AK4531_LAUXA, AK4531_RAUXA, 7, 7, 1, 1), +AK4531_DOUBLE_TLV("Aux Volume", 0, AK4531_LAUXA, AK4531_RAUXA, 0, 0, 0x1f, 1, + db_scale_input), +AK4531_DOUBLE("Aux Playback Switch", 0, AK4531_OUT_SW2, AK4531_OUT_SW2, 5, 4, 1, 0), +AK4531_INPUT_SW("Aux Capture Route", 0, AK4531_LIN_SW2, AK4531_RIN_SW2, 4, 3), + +AK4531_SINGLE("Mono Switch", 0, AK4531_MONO1, 7, 1, 1), +AK4531_SINGLE_TLV("Mono Volume", 0, AK4531_MONO1, 0, 0x1f, 1, db_scale_input), +AK4531_SINGLE("Mono Playback Switch", 0, AK4531_OUT_SW2, 0, 1, 0), +AK4531_DOUBLE("Mono Capture Switch", 0, AK4531_LIN_SW2, AK4531_RIN_SW2, 0, 0, 1, 0), + +AK4531_SINGLE("Mono Switch", 1, AK4531_MONO2, 7, 1, 1), +AK4531_SINGLE_TLV("Mono Volume", 1, AK4531_MONO2, 0, 0x1f, 1, db_scale_input), +AK4531_SINGLE("Mono Playback Switch", 1, AK4531_OUT_SW2, 1, 1, 0), +AK4531_DOUBLE("Mono Capture Switch", 1, AK4531_LIN_SW2, AK4531_RIN_SW2, 1, 1, 1, 0), + +AK4531_SINGLE_TLV("Mic Volume", 0, AK4531_MIC, 0, 0x1f, 1, db_scale_input), +AK4531_SINGLE("Mic Switch", 0, AK4531_MIC, 7, 1, 1), +AK4531_SINGLE("Mic Playback Switch", 0, AK4531_OUT_SW1, 0, 1, 0), +AK4531_DOUBLE("Mic Capture Switch", 0, AK4531_LIN_SW1, AK4531_RIN_SW1, 0, 0, 1, 0), + +AK4531_DOUBLE("Mic Bypass Capture Switch", 0, AK4531_LIN_SW2, AK4531_RIN_SW2, 7, 7, 1, 0), +AK4531_DOUBLE("Mono1 Bypass Capture Switch", 0, AK4531_LIN_SW2, AK4531_RIN_SW2, 6, 6, 1, 0), +AK4531_DOUBLE("Mono2 Bypass Capture Switch", 0, AK4531_LIN_SW2, AK4531_RIN_SW2, 5, 5, 1, 0), + +AK4531_SINGLE("AD Input Select", 0, AK4531_AD_IN, 0, 1, 0), +AK4531_SINGLE("Mic Boost (+30dB)", 0, AK4531_MIC_GAIN, 0, 1, 0) +}; + +static int snd_ak4531_free(struct snd_ak4531 *ak4531) +{ + if (ak4531) { + if (ak4531->private_free) + ak4531->private_free(ak4531); + kfree(ak4531); + } + return 0; +} + +static int snd_ak4531_dev_free(struct snd_device *device) +{ + struct snd_ak4531 *ak4531 = device->device_data; + return snd_ak4531_free(ak4531); +} + +static u8 snd_ak4531_initial_map[0x19 + 1] = { + 0x9f, /* 00: Master Volume Lch */ + 0x9f, /* 01: Master Volume Rch */ + 0x9f, /* 02: Voice Volume Lch */ + 0x9f, /* 03: Voice Volume Rch */ + 0x9f, /* 04: FM Volume Lch */ + 0x9f, /* 05: FM Volume Rch */ + 0x9f, /* 06: CD Audio Volume Lch */ + 0x9f, /* 07: CD Audio Volume Rch */ + 0x9f, /* 08: Line Volume Lch */ + 0x9f, /* 09: Line Volume Rch */ + 0x9f, /* 0a: Aux Volume Lch */ + 0x9f, /* 0b: Aux Volume Rch */ + 0x9f, /* 0c: Mono1 Volume */ + 0x9f, /* 0d: Mono2 Volume */ + 0x9f, /* 0e: Mic Volume */ + 0x87, /* 0f: Mono-out Volume */ + 0x00, /* 10: Output Mixer SW1 */ + 0x00, /* 11: Output Mixer SW2 */ + 0x00, /* 12: Lch Input Mixer SW1 */ + 0x00, /* 13: Rch Input Mixer SW1 */ + 0x00, /* 14: Lch Input Mixer SW2 */ + 0x00, /* 15: Rch Input Mixer SW2 */ + 0x00, /* 16: Reset & Power Down */ + 0x00, /* 17: Clock Select */ + 0x00, /* 18: AD Input Select */ + 0x01 /* 19: Mic Amp Setup */ +}; + +int __devinit snd_ak4531_mixer(struct snd_card *card, + struct snd_ak4531 *_ak4531, + struct snd_ak4531 **rak4531) +{ + unsigned int idx; + int err; + struct snd_ak4531 *ak4531; + static struct snd_device_ops ops = { + .dev_free = snd_ak4531_dev_free, + }; + + snd_assert(rak4531 != NULL, return -EINVAL); + *rak4531 = NULL; + snd_assert(card != NULL && _ak4531 != NULL, return -EINVAL); + ak4531 = kzalloc(sizeof(*ak4531), GFP_KERNEL); + if (ak4531 == NULL) + return -ENOMEM; + *ak4531 = *_ak4531; + mutex_init(&ak4531->reg_mutex); + if ((err = snd_component_add(card, "AK4531")) < 0) { + snd_ak4531_free(ak4531); + return err; + } + strcpy(card->mixername, "Asahi Kasei AK4531"); + ak4531->write(ak4531, AK4531_RESET, 0x03); /* no RST, PD */ + udelay(100); + ak4531->write(ak4531, AK4531_CLOCK, 0x00); /* CODEC ADC and CODEC DAC use {LR,B}CLK2 and run off LRCLK2 PLL */ + for (idx = 0; idx <= 0x19; idx++) { + if (idx == AK4531_RESET || idx == AK4531_CLOCK) + continue; + ak4531->write(ak4531, idx, ak4531->regs[idx] = snd_ak4531_initial_map[idx]); /* recording source is mixer */ + } + for (idx = 0; idx < ARRAY_SIZE(snd_ak4531_controls); idx++) { + if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_ak4531_controls[idx], ak4531))) < 0) { + snd_ak4531_free(ak4531); + return err; + } + } + snd_ak4531_proc_init(card, ak4531); + if ((err = snd_device_new(card, SNDRV_DEV_CODEC, ak4531, &ops)) < 0) { + snd_ak4531_free(ak4531); + return err; + } + +#if 0 + snd_ak4531_dump(ak4531); +#endif + *rak4531 = ak4531; + return 0; +} + +/* + * power management + */ +#ifdef CONFIG_PM +void snd_ak4531_suspend(struct snd_ak4531 *ak4531) +{ + /* mute */ + ak4531->write(ak4531, AK4531_LMASTER, 0x9f); + ak4531->write(ak4531, AK4531_RMASTER, 0x9f); + /* powerdown */ + ak4531->write(ak4531, AK4531_RESET, 0x01); +} + +void snd_ak4531_resume(struct snd_ak4531 *ak4531) +{ + int idx; + + /* initialize */ + ak4531->write(ak4531, AK4531_RESET, 0x03); + udelay(100); + ak4531->write(ak4531, AK4531_CLOCK, 0x00); + /* restore mixer registers */ + for (idx = 0; idx <= 0x19; idx++) { + if (idx == AK4531_RESET || idx == AK4531_CLOCK) + continue; + ak4531->write(ak4531, idx, ak4531->regs[idx]); + } +} +#endif + +#ifdef CONFIG_PROC_FS +/* + * /proc interface + */ + +static void snd_ak4531_proc_read(struct snd_info_entry *entry, + struct snd_info_buffer *buffer) +{ + struct snd_ak4531 *ak4531 = entry->private_data; + + snd_iprintf(buffer, "Asahi Kasei AK4531\n\n"); + snd_iprintf(buffer, "Recording source : %s\n" + "MIC gain : %s\n", + ak4531->regs[AK4531_AD_IN] & 1 ? "external" : "mixer", + ak4531->regs[AK4531_MIC_GAIN] & 1 ? "+30dB" : "+0dB"); +} + +static void __devinit +snd_ak4531_proc_init(struct snd_card *card, struct snd_ak4531 *ak4531) +{ + struct snd_info_entry *entry; + + if (! snd_card_proc_new(card, "ak4531", &entry)) + snd_info_set_text_ops(entry, ak4531, snd_ak4531_proc_read); +} +#endif -- cgit v1.2.3 From 8bb8b453cb458d8f62411e78a4cfd6d860b503b6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 May 2008 09:47:45 +0200 Subject: [ALSA] trident - clean up obsolete synth codes Clean up the unused synth codes in the memory handling of trident driver. Signed-off-by: Takashi Iwai --- sound/pci/trident/trident_memory.c | 178 ------------------------------------- 1 file changed, 178 deletions(-) diff --git a/sound/pci/trident/trident_memory.c b/sound/pci/trident/trident_memory.c index df9b487fa17e..3fd7f1b29b0f 100644 --- a/sound/pci/trident/trident_memory.c +++ b/sound/pci/trident/trident_memory.c @@ -310,181 +310,3 @@ int snd_trident_free_pages(struct snd_trident *trident, mutex_unlock(&hdr->block_mutex); return 0; } - - -/*---------------------------------------------------------------- - * memory allocation using multiple pages (for synth) - *---------------------------------------------------------------- - * Unlike the DMA allocation above, non-contiguous pages are - * assigned to TLB. - *----------------------------------------------------------------*/ - -/* - */ -static int synth_alloc_pages(struct snd_trident *hw, struct snd_util_memblk *blk); -static int synth_free_pages(struct snd_trident *hw, struct snd_util_memblk *blk); - -/* - * allocate a synth sample area - */ -struct snd_util_memblk * -snd_trident_synth_alloc(struct snd_trident *hw, unsigned int size) -{ - struct snd_util_memblk *blk; - struct snd_util_memhdr *hdr = hw->tlb.memhdr; - - mutex_lock(&hdr->block_mutex); - blk = __snd_util_mem_alloc(hdr, size); - if (blk == NULL) { - mutex_unlock(&hdr->block_mutex); - return NULL; - } - if (synth_alloc_pages(hw, blk)) { - __snd_util_mem_free(hdr, blk); - mutex_unlock(&hdr->block_mutex); - return NULL; - } - mutex_unlock(&hdr->block_mutex); - return blk; -} - -EXPORT_SYMBOL(snd_trident_synth_alloc); - -/* - * free a synth sample area - */ -int -snd_trident_synth_free(struct snd_trident *hw, struct snd_util_memblk *blk) -{ - struct snd_util_memhdr *hdr = hw->tlb.memhdr; - - mutex_lock(&hdr->block_mutex); - synth_free_pages(hw, blk); - __snd_util_mem_free(hdr, blk); - mutex_unlock(&hdr->block_mutex); - return 0; -} - -EXPORT_SYMBOL(snd_trident_synth_free); - -/* - * reset TLB entry and free kernel page - */ -static void clear_tlb(struct snd_trident *trident, int page) -{ - void *ptr = page_to_ptr(trident, page); - dma_addr_t addr = page_to_addr(trident, page); - set_silent_tlb(trident, page); - if (ptr) { - struct snd_dma_buffer dmab; - dmab.dev.type = SNDRV_DMA_TYPE_DEV; - dmab.dev.dev = snd_dma_pci_data(trident->pci); - dmab.area = ptr; - dmab.addr = addr; - dmab.bytes = ALIGN_PAGE_SIZE; - snd_dma_free_pages(&dmab); - } -} - -/* check new allocation range */ -static void get_single_page_range(struct snd_util_memhdr *hdr, - struct snd_util_memblk *blk, - int *first_page_ret, int *last_page_ret) -{ - struct list_head *p; - struct snd_util_memblk *q; - int first_page, last_page; - first_page = firstpg(blk); - if ((p = blk->list.prev) != &hdr->block) { - q = list_entry(p, struct snd_util_memblk, list); - if (lastpg(q) == first_page) - first_page++; /* first page was already allocated */ - } - last_page = lastpg(blk); - if ((p = blk->list.next) != &hdr->block) { - q = list_entry(p, struct snd_util_memblk, list); - if (firstpg(q) == last_page) - last_page--; /* last page was already allocated */ - } - *first_page_ret = first_page; - *last_page_ret = last_page; -} - -/* - * allocate kernel pages and assign them to TLB - */ -static int synth_alloc_pages(struct snd_trident *hw, struct snd_util_memblk *blk) -{ - int page, first_page, last_page; - struct snd_dma_buffer dmab; - - firstpg(blk) = get_aligned_page(blk->offset); - lastpg(blk) = get_aligned_page(blk->offset + blk->size - 1); - get_single_page_range(hw->tlb.memhdr, blk, &first_page, &last_page); - - /* allocate a kernel page for each Trident page - - * fortunately Trident page size and kernel PAGE_SIZE is identical! - */ - for (page = first_page; page <= last_page; page++) { - if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(hw->pci), - ALIGN_PAGE_SIZE, &dmab) < 0) - goto __fail; - if (! is_valid_page(dmab.addr)) { - snd_dma_free_pages(&dmab); - goto __fail; - } - set_tlb_bus(hw, page, (unsigned long)dmab.area, dmab.addr); - } - return 0; - -__fail: - /* release allocated pages */ - last_page = page - 1; - for (page = first_page; page <= last_page; page++) - clear_tlb(hw, page); - - return -ENOMEM; -} - -/* - * free pages - */ -static int synth_free_pages(struct snd_trident *trident, struct snd_util_memblk *blk) -{ - int page, first_page, last_page; - - get_single_page_range(trident->tlb.memhdr, blk, &first_page, &last_page); - for (page = first_page; page <= last_page; page++) - clear_tlb(trident, page); - - return 0; -} - -/* - * copy_from_user(blk + offset, data, size) - */ -int snd_trident_synth_copy_from_user(struct snd_trident *trident, - struct snd_util_memblk *blk, - int offset, const char __user *data, int size) -{ - int page, nextofs, end_offset, temp, temp1; - - offset += blk->offset; - end_offset = offset + size; - page = get_aligned_page(offset) + 1; - do { - nextofs = aligned_page_offset(page); - temp = nextofs - offset; - temp1 = end_offset - offset; - if (temp1 < temp) - temp = temp1; - if (copy_from_user(offset_ptr(trident, offset), data, temp)) - return -EFAULT; - offset = nextofs; - data += temp; - page++; - } while (offset < end_offset); - return 0; -} - -EXPORT_SYMBOL(snd_trident_synth_copy_from_user); -- cgit v1.2.3 From 8ff7f2a46bd8831e1f1f2a694ec13921720180b7 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 21 Feb 2008 16:30:10 +0100 Subject: There is no need to have BOOT_PARAMS_SIZE known outside of atags.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit atags.c was the only user of KEXEC_BOOT_PARAMS_SIZE and kexec.h was only included to get that definition. Signed-off-by: Uwe Kleine-König Acked-by: Uli Luckas --- arch/arm/kernel/atags.c | 7 +++---- include/asm-arm/kexec.h | 2 -- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags.c index 64c420805e6f..56fef9a05504 100644 --- a/arch/arm/kernel/atags.c +++ b/arch/arm/kernel/atags.c @@ -1,5 +1,4 @@ #include -#include #include #include #include @@ -42,14 +41,14 @@ create_proc_entries(void) return 0; } - -static char __initdata atags_copy_buf[KEXEC_BOOT_PARAMS_SIZE]; +#define BOOT_PARAMS_SIZE 1536 +static char __initdata atags_copy_buf[BOOT_PARAMS_SIZE]; static char __initdata *atags_copy; void __init save_atags(const struct tag *tags) { atags_copy = atags_copy_buf; - memcpy(atags_copy, tags, KEXEC_BOOT_PARAMS_SIZE); + memcpy(atags_copy, tags, sizeof(atags_copy_buf)); } diff --git a/include/asm-arm/kexec.h b/include/asm-arm/kexec.h index 47fe34d692da..c8986bb99ed5 100644 --- a/include/asm-arm/kexec.h +++ b/include/asm-arm/kexec.h @@ -14,8 +14,6 @@ #define KEXEC_ARCH KEXEC_ARCH_ARM -#define KEXEC_BOOT_PARAMS_SIZE 1536 - #define KEXEC_ARM_ATAGS_OFFSET 0x1000 #define KEXEC_ARM_ZIMAGE_OFFSET 0x8000 -- cgit v1.2.3 From f7b0b939d54b457ba172e088f477af2012aef9b3 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 21 Feb 2008 15:04:40 +0100 Subject: clean up atags exporting code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This gets rid of two static variables (one of them being __initdata) and a static function. Signed-off-by: Uwe Kleine-König Acked-by: Uli Luckas --- arch/arm/kernel/atags.c | 80 ++++++++++++++++++++++++------------------------- 1 file changed, 39 insertions(+), 41 deletions(-) diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags.c index 56fef9a05504..42a1a1415fa6 100644 --- a/arch/arm/kernel/atags.c +++ b/arch/arm/kernel/atags.c @@ -6,9 +6,8 @@ struct buffer { size_t size; - char *data; + char data[]; }; -static struct buffer tags_buffer; static int read_buffer(char* page, char** start, off_t off, int count, @@ -28,58 +27,57 @@ read_buffer(char* page, char** start, off_t off, int count, return count; } - -static int -create_proc_entries(void) -{ - struct proc_dir_entry* tags_entry; - - tags_entry = create_proc_read_entry("atags", 0400, NULL, read_buffer, &tags_buffer); - if (!tags_entry) - return -ENOMEM; - - return 0; -} - #define BOOT_PARAMS_SIZE 1536 -static char __initdata atags_copy_buf[BOOT_PARAMS_SIZE]; -static char __initdata *atags_copy; +static char __initdata atags_copy[BOOT_PARAMS_SIZE]; void __init save_atags(const struct tag *tags) { - atags_copy = atags_copy_buf; - memcpy(atags_copy, tags, sizeof(atags_copy_buf)); + memcpy(atags_copy, tags, sizeof(atags_copy)); } - static int __init init_atags_procfs(void) { - struct tag *tag; - int error; + /* + * This cannot go into save_atags() because kmalloc and proc don't work + * yet when it is called. + */ + struct proc_dir_entry *tags_entry; + struct tag *tag = (struct tag *)atags_copy; + struct buffer *b; + size_t size; - if (!atags_copy) { - printk(KERN_WARNING "Exporting ATAGs: No saved tags found\n"); - return -EIO; + if (tag->hdr.tag != ATAG_CORE) { + printk(KERN_INFO "No ATAGs?"); + return -EINVAL; } - for (tag = (struct tag *) atags_copy; tag->hdr.size; tag = tag_next(tag)) + for (; tag->hdr.size; tag = tag_next(tag)) ; - tags_buffer.size = ((char *) tag - atags_copy) + sizeof(tag->hdr); - tags_buffer.data = kmalloc(tags_buffer.size, GFP_KERNEL); - if (tags_buffer.data == NULL) - return -ENOMEM; - memcpy(tags_buffer.data, atags_copy, tags_buffer.size); - - error = create_proc_entries(); - if (error) { - printk(KERN_ERR "Exporting ATAGs: not enough memory\n"); - kfree(tags_buffer.data); - tags_buffer.size = 0; - tags_buffer.data = NULL; - } + /* include the terminating ATAG_NONE */ + size = (char *)tag - atags_copy + sizeof(struct tag_header); - return error; -} + WARN_ON(tag->hdr.tag != ATAG_NONE); + + b = kmalloc(sizeof(*b) + size, GFP_KERNEL); + if (!b) + goto nomem; + b->size = size; + memcpy(b->data, atags_copy, size); + + tags_entry = create_proc_read_entry("atags", 0400, + NULL, read_buffer, b); + + if (!tags_entry) + goto nomem; + + return 0; + +nomem: + kfree(b); + printk(KERN_ERR "Exporting ATAGs: not enough memory\n"); + + return -ENOMEM; +} arch_initcall(init_atags_procfs); -- cgit v1.2.3 From a4831fbe096a6f4f691fd71b041ce27add54088e Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 21 May 2008 10:17:07 +0200 Subject: ns9xxx: fix assembler version of __REG2 to be consistent with the C version MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's not very critical because __REG2 isn't used in assembler code currently. Additionally some white space noise is fixed. Signed-off-by: Uwe Kleine-König --- include/asm-arm/arch-ns9xxx/hardware.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h index 0b7b34603f1c..0dca11ce21fc 100644 --- a/include/asm-arm/arch-ns9xxx/hardware.h +++ b/include/asm-arm/arch-ns9xxx/hardware.h @@ -66,13 +66,13 @@ __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field) # define REGGETIM_IDX(var, reg, field, idx) \ - __REGGET(var, reg ## _ ## field((idx))) / \ + __REGGET(var, reg ## _ ## field((idx))) / \ __REGSHIFT(reg ## _ ## field((idx))) #else # define __REG(x) io_p2v(x) -# define __REG2(x, y) io_p2v((x) + (y)) +# define __REG2(x, y) io_p2v((x) + 4 * (y)) #endif -- cgit v1.2.3 From 72860b0f3c4a303498c9e16c8a4a38ddf23d56de Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 May 2008 11:25:03 +0200 Subject: sound: Clean up sound/oss/Kconfig Removed unnecessary dependencies, fix a wrong selection, and make CONFIG_SOUND_OSS menuconfig to simplify. Signed-off-by: Takashi Iwai --- sound/oss/Kconfig | 49 +++++++++++++++++++------------------------------ 1 file changed, 19 insertions(+), 30 deletions(-) diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index 3be2dc1025b5..33940139844b 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -7,7 +7,7 @@ config SOUND_BCM_CS4297A tristate "Crystal Sound CS4297a (for Swarm)" - depends on SOUND_PRIME && SIBYTE_SWARM + depends on SIBYTE_SWARM help The BCM91250A has a Crystal CS4297a on synchronous serial port B (in addition to the DB-9 serial port). Say Y or M @@ -17,7 +17,7 @@ config SOUND_BCM_CS4297A config SOUND_VWSND tristate "SGI Visual Workstation Sound" - depends on SOUND_PRIME && X86_VISWS + depends on X86_VISWS help Say Y or M if you have an SGI Visual Workstation and you want to be able to use its on-board audio. Read @@ -26,19 +26,18 @@ config SOUND_VWSND config SOUND_HAL2 tristate "SGI HAL2 sound (EXPERIMENTAL)" - depends on SOUND_PRIME && SGI_IP22 && EXPERIMENTAL + depends on SGI_IP22 && EXPERIMENTAL help Say Y or M if you have an SGI Indy or Indigo2 system and want to be able to use its on-board A2 audio system. config SOUND_AU1550_AC97 tristate "Au1550/Au1200 AC97 Sound" - select SND_AC97_CODEC - depends on SOUND_PRIME && (SOC_AU1550 || SOC_AU1200) + depends on SOC_AU1550 || SOC_AU1200 config SOUND_TRIDENT tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core" - depends on SOUND_PRIME && PCI + depends on PCI ---help--- Say Y or M if you have a PCI sound card utilizing the Trident 4DWave-DX/NX chipset or your mother board chipset has SiS 7018 @@ -79,7 +78,7 @@ config SOUND_TRIDENT config SOUND_MSNDCLAS tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey" - depends on SOUND_PRIME && (m || !STANDALONE) && ISA + depends on (m || !STANDALONE) && ISA help Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or Monterey (not for the Pinnacle or Fiji). @@ -143,7 +142,7 @@ config MSNDCLAS_IO config SOUND_MSNDPIN tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji" - depends on SOUND_PRIME && (m || !STANDALONE) && ISA + depends on (m || !STANDALONE) && ISA help Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji. See for important information @@ -229,7 +228,7 @@ config MSNDPIN_NONPNP configure the card's resources. comment "MSND Pinnacle DSP section will be configured to above parameters." - depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP + depends on SOUND_MSNDPIN=y && MSNDPIN_NONPNP config MSNDPIN_CFG hex "MSND Pinnacle config port 250,260,270" @@ -242,7 +241,7 @@ config MSNDPIN_CFG Mode". comment "Pinnacle-specific Device Configuration (0 disables)" - depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP + depends on SOUND_MSNDPIN=y && MSNDPIN_NONPNP config MSNDPIN_MPU_IO hex "MSND Pinnacle MPU I/O (e.g. 330)" @@ -294,7 +293,7 @@ config MSNDPIN_JOYSTICK_IO config MSND_FIFOSIZE int "MSND buffer size (kB)" - depends on SOUND_PRIME && (SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y) + depends on SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y default "128" help Configures the size of each audio buffer, in kilobytes, for @@ -302,9 +301,9 @@ config MSND_FIFOSIZE and Pinnacle). Larger values reduce the chance of data overruns at the expense of overall latency. If unsure, use the default. -config SOUND_OSS +menuconfig SOUND_OSS tristate "OSS sound modules" - depends on SOUND_PRIME && ISA_DMA_API && VIRT_TO_BUS + depends on ISA_DMA_API && VIRT_TO_BUS help OSS is the Open Sound System suite of sound card drivers. They make sound programming easier since they provide a common API. Say Y or @@ -312,16 +311,16 @@ config SOUND_OSS driver for your sound card above, then pick your driver from the list below. +if SOUND_OSS + config SOUND_TRACEINIT bool "Verbose initialisation" - depends on SOUND_OSS help Verbose soundcard initialization -- affects the format of autoprobe and initialization messages at boot time. config SOUND_DMAP bool "Persistent DMA buffers" - depends on SOUND_OSS ---help--- Linux can often have problems allocating DMA buffers for ISA sound cards on machines with more than 16MB of RAM. This is because ISA @@ -338,8 +337,6 @@ config SOUND_DMAP config SOUND_SSCAPE tristate "Ensoniq SoundScape support" - depends on SOUND_OSS - depends on VIRT_TO_BUS help Answer Y if you have a sound card based on the Ensoniq SoundScape chipset. Such cards are being manufactured at least by Ensoniq, Spea @@ -352,13 +349,11 @@ config SOUND_SSCAPE config SOUND_VMIDI tristate "Loopback MIDI device support" - depends on SOUND_OSS help Support for MIDI loopback on port 1 or 2. config SOUND_TRIX tristate "MediaTrix AudioTrix Pro support" - depends on SOUND_OSS help Answer Y if you have the AudioTriX Pro sound card manufactured by MediaTrix. @@ -382,7 +377,6 @@ config TRIX_BOOT_FILE config SOUND_MSS tristate "Microsoft Sound System support" - depends on SOUND_OSS ---help--- Again think carefully before answering Y to this question. It's safe to answer Y if you have the original Windows Sound System card @@ -414,7 +408,6 @@ config SOUND_MSS config SOUND_MPU401 tristate "MPU-401 support (NOT for SB16)" - depends on SOUND_OSS ---help--- Be careful with this question. The MPU401 interface is supported by all sound cards. However, some natively supported cards have their @@ -430,7 +423,6 @@ config SOUND_MPU401 config SOUND_PAS tristate "ProAudioSpectrum 16 support" - depends on SOUND_OSS ---help--- Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio 16 or Logitech SoundMan 16 sound card. Answer N if you have some @@ -452,7 +444,6 @@ config PAS_JOYSTICK config SOUND_PSS tristate "PSS (AD1848, ADSP-2115, ESC614) support" - depends on SOUND_OSS help Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven ADSP-16 or some other card based on the PSS chipset (AD1848 codec + @@ -495,7 +486,6 @@ config PSS_BOOT_FILE config SOUND_SB tristate "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support" - depends on SOUND_OSS ---help--- Answer Y if you have an original Sound Blaster card made by Creative Labs or a 100% hardware compatible clone (like the Thunderboard or @@ -522,7 +512,6 @@ config SOUND_SB config SOUND_YM3812 tristate "Yamaha FM synthesizer (YM3812/OPL-3) support" - depends on SOUND_OSS ---help--- Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4). Answering Y is usually a safe and recommended choice, however some @@ -538,7 +527,6 @@ config SOUND_YM3812 config SOUND_UART6850 tristate "6850 UART support" - depends on SOUND_OSS help This option enables support for MIDI interfaces based on the 6850 UART chip. This interface is rarely found on sound cards. It's safe @@ -549,7 +537,6 @@ config SOUND_UART6850 config SOUND_AEDSP16 tristate "Gallant Audio Cards (SC-6000 and SC-6600 based)" - depends on SOUND_OSS ---help--- Answer Y if you have a Gallant's Audio Excel DSP 16 card. This driver supports Audio Excel DSP 16 but not the III nor PnP versions @@ -630,14 +617,14 @@ endchoice config SOUND_VIDC tristate "VIDC 16-bit sound" - depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) && SOUND_OSS + depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) help 16-bit support for the VIDC onboard sound hardware found on Acorn machines. config SOUND_WAVEARTIST tristate "Netwinder WaveArtist" - depends on ARM && SOUND_OSS && ARCH_NETWINDER + depends on ARM && ARCH_NETWINDER help Say Y here to include support for the Rockwell WaveArtist sound system. This driver is mainly for the NetWinder. @@ -646,9 +633,11 @@ config SOUND_KAHLUA tristate "XpressAudio Sound Blaster emulation" depends on SOUND_SB +endif # SOUND_OSS + config SOUND_SH_DAC_AUDIO tristate "SuperH DAC audio support" - depends on SOUND_PRIME && CPU_SH3 + depends on CPU_SH3 config SOUND_SH_DAC_AUDIO_CHANNEL int "DAC channel" -- cgit v1.2.3 From 2621f0338ce4e3e57cc32a967f5a3d2999390fe3 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 May 2008 11:27:24 +0200 Subject: [ALSA] trivial clean up of sound/isa/sb/Makefile Remove unneeded sort in sound/isa/sb/Makefile. Signed-off-by: Takashi Iwai --- sound/isa/sb/Makefile | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/isa/sb/Makefile b/sound/isa/sb/Makefile index c9d1c986d70e..1098a56b2f4b 100644 --- a/sound/isa/sb/Makefile +++ b/sound/isa/sb/Makefile @@ -34,5 +34,3 @@ ifeq ($(CONFIG_SND_SB16_CSP),y) obj-$(CONFIG_SND_SBAWE) += snd-sb16-csp.o endif obj-$(call sequencer,$(CONFIG_SND_SBAWE)) += snd-emu8000-synth.o - -obj-m := $(sort $(obj-m)) -- cgit v1.2.3 From a5003fc04113c217370409beac812831cbf6e0ac Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 May 2008 09:49:41 +0200 Subject: [ALSA] emu10k1 - simplify page allocation for synth Simplify the page allocation of emu10k1 driver for emux synth support. Since these pages aren't be necessarily coherent, we can avoid expensive DMA-coherent routines. Signed-off-by: Takashi Iwai --- sound/pci/emu10k1/memory.c | 66 ++++++++++++++++++++-------------------------- 1 file changed, 28 insertions(+), 38 deletions(-) diff --git a/sound/pci/emu10k1/memory.c b/sound/pci/emu10k1/memory.c index 916c1dbcd53c..128eaca17a61 100644 --- a/sound/pci/emu10k1/memory.c +++ b/sound/pci/emu10k1/memory.c @@ -437,43 +437,46 @@ static void get_single_page_range(struct snd_util_memhdr *hdr, *last_page_ret = last_page; } +/* release allocated pages */ +static void __synth_free_pages(struct snd_emu10k1 *emu, int first_page, + int last_page) +{ + int page; + + for (page = first_page; page <= last_page; page++) { + free_page((unsigned long)emu->page_ptr_table[page]); + emu->page_addr_table[page] = 0; + emu->page_ptr_table[page] = NULL; + } +} + /* * allocate kernel pages */ static int synth_alloc_pages(struct snd_emu10k1 *emu, struct snd_emu10k1_memblk *blk) { int page, first_page, last_page; - struct snd_dma_buffer dmab; emu10k1_memblk_init(blk); get_single_page_range(emu->memhdr, blk, &first_page, &last_page); /* allocate kernel pages */ for (page = first_page; page <= last_page; page++) { - if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(emu->pci), - PAGE_SIZE, &dmab) < 0) - goto __fail; - if (! is_valid_page(emu, dmab.addr)) { - snd_dma_free_pages(&dmab); - goto __fail; + /* first try to allocate from <4GB zone */ + struct page *p = alloc_page(GFP_KERNEL | GFP_DMA32 | + __GFP_NOWARN); + if (!p || (page_to_pfn(p) & ~(emu->dma_mask >> PAGE_SHIFT))) + /* try to allocate from <16MB zone */ + p = alloc_page(GFP_DMA | + __GFP_NORETRY | /* no OOM-killer */ + __GFP_NOWARN); + if (!p) { + __synth_free_pages(emu, first_page, page - 1); + return -ENOMEM; } - emu->page_addr_table[page] = dmab.addr; - emu->page_ptr_table[page] = dmab.area; + emu->page_addr_table[page] = page_to_phys(p); + emu->page_ptr_table[page] = page_address(p); } return 0; - -__fail: - /* release allocated pages */ - last_page = page - 1; - for (page = first_page; page <= last_page; page++) { - dmab.area = emu->page_ptr_table[page]; - dmab.addr = emu->page_addr_table[page]; - dmab.bytes = PAGE_SIZE; - snd_dma_free_pages(&dmab); - emu->page_addr_table[page] = 0; - emu->page_ptr_table[page] = NULL; - } - - return -ENOMEM; } /* @@ -481,23 +484,10 @@ __fail: */ static int synth_free_pages(struct snd_emu10k1 *emu, struct snd_emu10k1_memblk *blk) { - int page, first_page, last_page; - struct snd_dma_buffer dmab; + int first_page, last_page; get_single_page_range(emu->memhdr, blk, &first_page, &last_page); - dmab.dev.type = SNDRV_DMA_TYPE_DEV; - dmab.dev.dev = snd_dma_pci_data(emu->pci); - for (page = first_page; page <= last_page; page++) { - if (emu->page_ptr_table[page] == NULL) - continue; - dmab.area = emu->page_ptr_table[page]; - dmab.addr = emu->page_addr_table[page]; - dmab.bytes = PAGE_SIZE; - snd_dma_free_pages(&dmab); - emu->page_addr_table[page] = 0; - emu->page_ptr_table[page] = NULL; - } - + __synth_free_pages(emu, first_page, last_page); return 0; } -- cgit v1.2.3 From 7a14ce1d8c1d3a6118d406e64eaf9aa70375e085 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 15:43:53 +0200 Subject: nohz: reduce jiffies polling overhead Signed-off-by: Ingo Molnar --- kernel/time/tick-sched.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index b854a895591e..cb75394ed00e 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -48,6 +48,13 @@ static void tick_do_update_jiffies64(ktime_t now) unsigned long ticks = 0; ktime_t delta; + /* + * Do a quick check without holding xtime_lock: + */ + delta = ktime_sub(now, last_jiffies_update); + if (delta.tv64 < tick_period.tv64) + return; + /* Reevalute with xtime_lock held */ write_seqlock(&xtime_lock); -- cgit v1.2.3 From ba3a5974239293d921235e6fa82b09b670e674ef Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 30 May 2008 14:55:47 +0200 Subject: - fix typo in include/asm-x86/nmi.h --- include/asm-x86/nmi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 6f4d44fc051f..972a4f6f799a 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -40,7 +40,7 @@ static inline void unset_nmi_pm_callback(struct pm_dev *dev) extern void default_do_nmi(struct pt_regs *); extern void nmi_watchdog_default(void); #else -#define nmi_watchdog_default(void) do {} while (0) +#define nmi_watchdog_default() do { } while (0) #endif extern void die_nmi(char *str, struct pt_regs *regs, int do_panic); -- cgit v1.2.3 From d364319b989967b74e57fef5c8017fd56a16c392 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 2 May 2008 23:42:01 +0200 Subject: x86: move mmconfig declarations to header arch/x86/kernel/mmconf-fam10h_64.c is missing the prototypes, which are decalred in arch/x86/kernel/setup_64.c. Move the prototypes and the inline stubs to the appropriate header file. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/mmconf-fam10h_64.c | 1 + arch/x86/kernel/setup_64.c | 13 +------------ include/asm-x86/mmconfig.h | 12 ++++++++++++ 3 files changed, 14 insertions(+), 12 deletions(-) create mode 100644 include/asm-x86/mmconfig.h diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c index edc5fbfe85c0..fdfdc550b366 100644 --- a/arch/x86/kernel/mmconf-fam10h_64.c +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "../pci/pci.h" diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff1286ad8a..341230db74e1 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -71,6 +71,7 @@ #include #include #include +#include #include #ifdef CONFIG_PARAVIRT @@ -293,18 +294,6 @@ static void __init parse_setup_data(void) } } -#ifdef CONFIG_PCI_MMCONFIG -extern void __cpuinit fam10h_check_enable_mmcfg(void); -extern void __init check_enable_amd_mmconf_dmi(void); -#else -void __cpuinit fam10h_check_enable_mmcfg(void) -{ -} -void __init check_enable_amd_mmconf_dmi(void) -{ -} -#endif - /* * setup_arch - architecture-specific boot-time initializations * diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h new file mode 100644 index 000000000000..95beda07c6fa --- /dev/null +++ b/include/asm-x86/mmconfig.h @@ -0,0 +1,12 @@ +#ifndef _ASM_MMCONFIG_H +#define _ASM_MMCONFIG_H + +#ifdef CONFIG_PCI_MMCONFIG +extern void __cpuinit fam10h_check_enable_mmcfg(void); +extern void __init check_enable_amd_mmconf_dmi(void); +#else +static inline void fam10h_check_enable_mmcfg(void) { } +static inline void check_enable_amd_mmconf_dmi(void) { } +#endif + +#endif -- cgit v1.2.3 From 4d285878564bb46cf64e54be18eeffe33ca583a0 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 18:48:32 -0400 Subject: x86: Move the AMD64 specific parts out of setup_64.c Create a separate amd_64.c file in the cpu/ dir for the useful parts to live in. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/Makefile | 1 + arch/x86/kernel/cpu/amd_64.c | 235 +++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/setup_64.c | 232 ++---------------------------------------- 3 files changed, 242 insertions(+), 226 deletions(-) create mode 100644 arch/x86/kernel/cpu/amd_64.c diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index a0c6f8190887..ef065c1a2e1a 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -7,6 +7,7 @@ obj-y += proc.o feature_names.o obj-$(CONFIG_X86_32) += common.o bugs.o obj-$(CONFIG_X86_32) += amd.o +obj-$(CONFIG_X86_64) += amd_64.o obj-$(CONFIG_X86_32) += cyrix.o obj-$(CONFIG_X86_32) += centaur.o obj-$(CONFIG_X86_32) += transmeta.o diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c new file mode 100644 index 000000000000..1746f6f95726 --- /dev/null +++ b/arch/x86/kernel/cpu/amd_64.c @@ -0,0 +1,235 @@ +#include +#include + +#include +#include +#include + +#include + +extern int __cpuinit get_model_name(struct cpuinfo_x86 *c); +extern void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c); + +int force_mwait __cpuinitdata; + +#ifdef CONFIG_NUMA +static int __cpuinit nearby_node(int apicid) +{ + int i, node; + + for (i = apicid - 1; i >= 0; i--) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + return first_node(node_online_map); /* Shouldn't happen */ +} +#endif + +/* + * On a AMD dual core setup the lower bits of the APIC id distingush the cores. + * Assumes number of cores is a power of two. + */ +static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned bits; +#ifdef CONFIG_NUMA + int cpu = smp_processor_id(); + int node = 0; + unsigned apicid = hard_smp_processor_id(); +#endif + bits = c->x86_coreid_bits; + + /* Low order bits define the core id (index of core in socket) */ + c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); + /* Convert the initial APIC ID into the socket ID */ + c->phys_proc_id = c->initial_apicid >> bits; + +#ifdef CONFIG_NUMA + node = c->phys_proc_id; + if (apicid_to_node[apicid] != NUMA_NO_NODE) + node = apicid_to_node[apicid]; + if (!node_online(node)) { + /* Two possibilities here: + - The CPU is missing memory and no node was created. + In that case try picking one from a nearby CPU + - The APIC IDs differ from the HyperTransport node IDs + which the K8 northbridge parsing fills in. + Assume they are all increased by a constant offset, + but in the same order as the HT nodeids. + If that doesn't result in a usable node fall back to the + path for the previous case. */ + + int ht_nodeid = c->initial_apicid; + + if (ht_nodeid >= 0 && + apicid_to_node[ht_nodeid] != NUMA_NO_NODE) + node = apicid_to_node[ht_nodeid]; + /* Pick a nearby node */ + if (!node_online(node)) + node = nearby_node(apicid); + } + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +#endif +} + +static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned bits, ecx; + + /* Multi core CPU? */ + if (c->extended_cpuid_level < 0x80000008) + return; + + ecx = cpuid_ecx(0x80000008); + + c->x86_max_cores = (ecx & 0xff) + 1; + + /* CPU telling us the core id bits shift? */ + bits = (ecx >> 12) & 0xF; + + /* Otherwise recompute */ + if (bits == 0) { + while ((1 << bits) < c->x86_max_cores) + bits++; + } + + c->x86_coreid_bits = bits; + +#endif +} + +#define ENABLE_C1E_MASK 0x18000000 +#define CPUID_PROCESSOR_SIGNATURE 1 +#define CPUID_XFAM 0x0ff00000 +#define CPUID_XFAM_K8 0x00000000 +#define CPUID_XFAM_10H 0x00100000 +#define CPUID_XFAM_11H 0x00200000 +#define CPUID_XMOD 0x000f0000 +#define CPUID_XMOD_REV_F 0x00040000 + +/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ +static __cpuinit int amd_apic_timer_broken(void) +{ + u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); + + switch (eax & CPUID_XFAM) { + case CPUID_XFAM_K8: + if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) + break; + case CPUID_XFAM_10H: + case CPUID_XFAM_11H: + rdmsr(MSR_K8_ENABLE_C1E, lo, hi); + if (lo & ENABLE_C1E_MASK) + return 1; + break; + default: + /* err on the side of caution */ + return 1; + } + return 0; +} + +void __cpuinit early_init_amd(struct cpuinfo_x86 *c) +{ + early_init_amd_mc(c); + + /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ + if (c->x86_power & (1<<8)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +void __cpuinit init_amd(struct cpuinfo_x86 *c) +{ + unsigned level; + +#ifdef CONFIG_SMP + unsigned long value; + + /* + * Disable TLB flush filter by setting HWCR.FFDIS on K8 + * bit 6 of msr C001_0015 + * + * Errata 63 for SH-B3 steppings + * Errata 122 for all steppings (F+ have it disabled by default) + */ + if (c->x86 == 15) { + rdmsrl(MSR_K8_HWCR, value); + value |= 1 << 6; + wrmsrl(MSR_K8_HWCR, value); + } +#endif + + /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; + 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ + clear_cpu_cap(c, 0*32+31); + + /* On C+ stepping K8 rep microcode works well for copy/memset */ + level = cpuid_eax(1); + if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || + level >= 0x0f58)) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + if (c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + + /* Enable workaround for FXSAVE leak */ + if (c->x86 >= 6) + set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); + + level = get_model_name(c); + if (!level) { + switch (c->x86) { + case 15: + /* Should distinguish Models here, but this is only + a fallback anyways. */ + strcpy(c->x86_model_id, "Hammer"); + break; + } + } + display_cacheinfo(c); + + /* Multi core CPU? */ + if (c->extended_cpuid_level >= 0x80000008) + amd_detect_cmp(c); + + if (c->extended_cpuid_level >= 0x80000006 && + (cpuid_edx(0x80000006) & 0xf000)) + num_cache_leaves = 4; + else + num_cache_leaves = 3; + + if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_K8); + + /* MFENCE stops RDTSC speculation */ + set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); + + if (c->x86 == 0x10) + fam10h_check_enable_mmcfg(); + + if (amd_apic_timer_broken()) + disable_apic_timer = 1; + + if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { + unsigned long long tseg; + + /* + * Split up direct mapping around the TSEG SMM area. + * Don't do it for gbpages because there seems very little + * benefit in doing so. + */ + if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && + (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) + set_memory_4k((unsigned long)__va(tseg), 1); + } +} diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 341230db74e1..b07b1997ed97 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -96,8 +96,6 @@ int bootloader_type; unsigned long saved_video_mode; -int force_mwait __cpuinitdata; - /* * Early DMI memory */ @@ -526,7 +524,7 @@ void __init setup_arch(char **cmdline_p) check_enable_amd_mmconf_dmi(); } -static int __cpuinit get_model_name(struct cpuinfo_x86 *c) +int __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; @@ -542,7 +540,7 @@ static int __cpuinit get_model_name(struct cpuinfo_x86 *c) } -static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) +void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) { unsigned int n, dummy, eax, ebx, ecx, edx; @@ -574,228 +572,6 @@ static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) } } -#ifdef CONFIG_NUMA -static int __cpuinit nearby_node(int apicid) -{ - int i, node; - - for (i = apicid - 1; i >= 0; i--) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - return first_node(node_online_map); /* Shouldn't happen */ -} -#endif - -/* - * On a AMD dual core setup the lower bits of the APIC id distingush the cores. - * Assumes number of cores is a power of two. - */ -static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits; -#ifdef CONFIG_NUMA - int cpu = smp_processor_id(); - int node = 0; - unsigned apicid = hard_smp_processor_id(); -#endif - bits = c->x86_coreid_bits; - - /* Low order bits define the core id (index of core in socket) */ - c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); - /* Convert the initial APIC ID into the socket ID */ - c->phys_proc_id = c->initial_apicid >> bits; - -#ifdef CONFIG_NUMA - node = c->phys_proc_id; - if (apicid_to_node[apicid] != NUMA_NO_NODE) - node = apicid_to_node[apicid]; - if (!node_online(node)) { - /* Two possibilities here: - - The CPU is missing memory and no node was created. - In that case try picking one from a nearby CPU - - The APIC IDs differ from the HyperTransport node IDs - which the K8 northbridge parsing fills in. - Assume they are all increased by a constant offset, - but in the same order as the HT nodeids. - If that doesn't result in a usable node fall back to the - path for the previous case. */ - - int ht_nodeid = c->initial_apicid; - - if (ht_nodeid >= 0 && - apicid_to_node[ht_nodeid] != NUMA_NO_NODE) - node = apicid_to_node[ht_nodeid]; - /* Pick a nearby node */ - if (!node_online(node)) - node = nearby_node(apicid); - } - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -#endif -} - -static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits, ecx; - - /* Multi core CPU? */ - if (c->extended_cpuid_level < 0x80000008) - return; - - ecx = cpuid_ecx(0x80000008); - - c->x86_max_cores = (ecx & 0xff) + 1; - - /* CPU telling us the core id bits shift? */ - bits = (ecx >> 12) & 0xF; - - /* Otherwise recompute */ - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - - c->x86_coreid_bits = bits; - -#endif -} - -#define ENABLE_C1E_MASK 0x18000000 -#define CPUID_PROCESSOR_SIGNATURE 1 -#define CPUID_XFAM 0x0ff00000 -#define CPUID_XFAM_K8 0x00000000 -#define CPUID_XFAM_10H 0x00100000 -#define CPUID_XFAM_11H 0x00200000 -#define CPUID_XMOD 0x000f0000 -#define CPUID_XMOD_REV_F 0x00040000 - -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(void) -{ - u32 lo, hi, eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE); - - switch (eax & CPUID_XFAM) { - case CPUID_XFAM_K8: - if ((eax & CPUID_XMOD) < CPUID_XMOD_REV_F) - break; - case CPUID_XFAM_10H: - case CPUID_XFAM_11H: - rdmsr(MSR_K8_ENABLE_C1E, lo, hi); - if (lo & ENABLE_C1E_MASK) - return 1; - break; - default: - /* err on the side of caution */ - return 1; - } - return 0; -} - -static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) -{ - early_init_amd_mc(c); - - /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ - if (c->x86_power & (1<<8)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_amd(struct cpuinfo_x86 *c) -{ - unsigned level; - -#ifdef CONFIG_SMP - unsigned long value; - - /* - * Disable TLB flush filter by setting HWCR.FFDIS on K8 - * bit 6 of msr C001_0015 - * - * Errata 63 for SH-B3 steppings - * Errata 122 for all steppings (F+ have it disabled by default) - */ - if (c->x86 == 15) { - rdmsrl(MSR_K8_HWCR, value); - value |= 1 << 6; - wrmsrl(MSR_K8_HWCR, value); - } -#endif - - /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; - 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ - clear_cpu_cap(c, 0*32+31); - - /* On C+ stepping K8 rep microcode works well for copy/memset */ - level = cpuid_eax(1); - if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || - level >= 0x0f58)) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - if (c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - - /* Enable workaround for FXSAVE leak */ - if (c->x86 >= 6) - set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); - - level = get_model_name(c); - if (!level) { - switch (c->x86) { - case 15: - /* Should distinguish Models here, but this is only - a fallback anyways. */ - strcpy(c->x86_model_id, "Hammer"); - break; - } - } - display_cacheinfo(c); - - /* Multi core CPU? */ - if (c->extended_cpuid_level >= 0x80000008) - amd_detect_cmp(c); - - if (c->extended_cpuid_level >= 0x80000006 && - (cpuid_edx(0x80000006) & 0xf000)) - num_cache_leaves = 4; - else - num_cache_leaves = 3; - - if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_K8); - - /* MFENCE stops RDTSC speculation */ - set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); - - if (c->x86 == 0x10) - fam10h_check_enable_mmcfg(); - - if (amd_apic_timer_broken()) - disable_apic_timer = 1; - - if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { - unsigned long long tseg; - - /* - * Split up direct mapping around the TSEG SMM area. - * Don't do it for gbpages because there seems very little - * benefit in doing so. - */ - if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && - (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) - set_memory_4k((unsigned long)__va(tseg), 1); - } -} - void __cpuinit detect_ht(struct cpuinfo_x86 *c) { #ifdef CONFIG_SMP @@ -977,6 +753,10 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) c->x86_vendor = X86_VENDOR_UNKNOWN; } +// FIXME: Needs to use cpu_vendor_dev_register +extern void __cpuinit early_init_amd(struct cpuinfo_x86 *c); +extern void __cpuinit init_amd(struct cpuinfo_x86 *c); + /* Do some early cpuid on the boot CPU to get some parameter that are needed before check_bugs. Everything advanced is in identify_cpu below. */ -- cgit v1.2.3 From a82fbe31cb387bb246e2d3b3c177f551bb991135 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 18:54:32 -0400 Subject: x86: Move the 64-bit Intel specific parts out of setup_64.c Create a separate intel_64.c file in the cpu/ dir for the useful parts to live in. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/Makefile | 1 + arch/x86/kernel/cpu/intel_64.c | 97 ++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/setup_64.c | 93 +--------------------------------------- 3 files changed, 100 insertions(+), 91 deletions(-) create mode 100644 arch/x86/kernel/cpu/intel_64.c diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index ef065c1a2e1a..b7a11924fed7 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_X86_32) += cyrix.o obj-$(CONFIG_X86_32) += centaur.o obj-$(CONFIG_X86_32) += transmeta.o obj-$(CONFIG_X86_32) += intel.o +obj-$(CONFIG_X86_64) += intel_64.o obj-$(CONFIG_X86_32) += umc.o obj-$(CONFIG_X86_MCE) += mcheck/ diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c new file mode 100644 index 000000000000..e5f929f6c3d4 --- /dev/null +++ b/arch/x86/kernel/cpu/intel_64.c @@ -0,0 +1,97 @@ +#include +#include +#include +#include +#include +#include + +void __cpuinit early_init_intel(struct cpuinfo_x86 *c) +{ + if ((c->x86 == 0xf && c->x86_model >= 0x03) || + (c->x86 == 0x6 && c->x86_model >= 0x0e)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +/* + * find out the number of processor cores on the die + */ +static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) +{ + unsigned int eax, t; + + if (c->cpuid_level < 4) + return 1; + + cpuid_count(4, 0, &eax, &t, &t, &t); + + if (eax & 0x1f) + return ((eax >> 26) + 1); + else + return 1; +} + +static void __cpuinit srat_detect_node(void) +{ +#ifdef CONFIG_NUMA + unsigned node; + int cpu = smp_processor_id(); + int apicid = hard_smp_processor_id(); + + /* Don't do the funky fallback heuristics the AMD version employs + for now. */ + node = apicid_to_node[apicid]; + if (node == NUMA_NO_NODE || !node_online(node)) + node = first_node(node_online_map); + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +} + +void __cpuinit init_intel(struct cpuinfo_x86 *c) +{ + /* Cache sizes */ + unsigned n; + + init_intel_cacheinfo(c); + if (c->cpuid_level > 9) { + unsigned eax = cpuid_eax(10); + /* Check for version and the number of counters */ + if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) + set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); + } + + if (cpu_has_ds) { + unsigned int l1, l2; + rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); + if (!(l1 & (1<<11))) + set_cpu_cap(c, X86_FEATURE_BTS); + if (!(l1 & (1<<12))) + set_cpu_cap(c, X86_FEATURE_PEBS); + } + + + if (cpu_has_bts) + ds_init_intel(c); + + n = c->extended_cpuid_level; + if (n >= 0x80000008) { + unsigned eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + /* CPUID workaround for Intel 0F34 CPU */ + if (c->x86_vendor == X86_VENDOR_INTEL && + c->x86 == 0xF && c->x86_model == 0x3 && + c->x86_mask == 0x4) + c->x86_phys_bits = 36; + } + + if (c->x86 == 15) + c->x86_cache_alignment = c->x86_clflush_size * 2; + if (c->x86 == 6) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); + c->x86_max_cores = intel_num_cpu_cores(c); + + srat_detect_node(); +} diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index b07b1997ed97..c4e6a0b6c303 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -622,97 +622,6 @@ out: #endif } -/* - * find out the number of processor cores on the die - */ -static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) -{ - unsigned int eax, t; - - if (c->cpuid_level < 4) - return 1; - - cpuid_count(4, 0, &eax, &t, &t, &t); - - if (eax & 0x1f) - return ((eax >> 26) + 1); - else - return 1; -} - -static void __cpuinit srat_detect_node(void) -{ -#ifdef CONFIG_NUMA - unsigned node; - int cpu = smp_processor_id(); - int apicid = hard_smp_processor_id(); - - /* Don't do the funky fallback heuristics the AMD version employs - for now. */ - node = apicid_to_node[apicid]; - if (node == NUMA_NO_NODE || !node_online(node)) - node = first_node(node_online_map); - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -} - -static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) -{ - if ((c->x86 == 0xf && c->x86_model >= 0x03) || - (c->x86 == 0x6 && c->x86_model >= 0x0e)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_intel(struct cpuinfo_x86 *c) -{ - /* Cache sizes */ - unsigned n; - - init_intel_cacheinfo(c); - if (c->cpuid_level > 9) { - unsigned eax = cpuid_eax(10); - /* Check for version and the number of counters */ - if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) - set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); - } - - if (cpu_has_ds) { - unsigned int l1, l2; - rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); - if (!(l1 & (1<<11))) - set_cpu_cap(c, X86_FEATURE_BTS); - if (!(l1 & (1<<12))) - set_cpu_cap(c, X86_FEATURE_PEBS); - } - - - if (cpu_has_bts) - ds_init_intel(c); - - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - /* CPUID workaround for Intel 0F34 CPU */ - if (c->x86_vendor == X86_VENDOR_INTEL && - c->x86 == 0xF && c->x86_model == 0x3 && - c->x86_mask == 0x4) - c->x86_phys_bits = 36; - } - - if (c->x86 == 15) - c->x86_cache_alignment = c->x86_clflush_size * 2; - if (c->x86 == 6) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); - c->x86_max_cores = intel_num_cpu_cores(c); - - srat_detect_node(); -} - static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) { if (c->x86 == 0x6 && c->x86_model >= 0xf) @@ -756,6 +665,8 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) // FIXME: Needs to use cpu_vendor_dev_register extern void __cpuinit early_init_amd(struct cpuinfo_x86 *c); extern void __cpuinit init_amd(struct cpuinfo_x86 *c); +extern void __cpuinit early_init_intel(struct cpuinfo_x86 *c); +extern void __cpuinit init_intel(struct cpuinfo_x86 *c); /* Do some early cpuid on the boot CPU to get some parameter that are needed before check_bugs. Everything advanced is in identify_cpu -- cgit v1.2.3 From 7e2191127eb414d7d5a11df6552ab6e3845d17a1 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 18:55:06 -0400 Subject: x86: Remove workaround for prescott (32bit P4) from 64-bit code. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/intel_64.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c index e5f929f6c3d4..b33912199484 100644 --- a/arch/x86/kernel/cpu/intel_64.c +++ b/arch/x86/kernel/cpu/intel_64.c @@ -79,11 +79,6 @@ void __cpuinit init_intel(struct cpuinfo_x86 *c) unsigned eax = cpuid_eax(0x80000008); c->x86_virt_bits = (eax >> 8) & 0xff; c->x86_phys_bits = eax & 0xff; - /* CPUID workaround for Intel 0F34 CPU */ - if (c->x86_vendor == X86_VENDOR_INTEL && - c->x86 == 0xF && c->x86_model == 0x3 && - c->x86_mask == 0x4) - c->x86_phys_bits = 36; } if (c->x86 == 15) -- cgit v1.2.3 From 30a713180b3d08fdec5ca572e5a1cd35253c5d8e Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 22 May 2008 18:57:25 -0400 Subject: x86: Move the 64-bit Centaur specific parts out of setup_64.c Create a separate centaur_64.c file in the cpu/ dir for the useful parts to live in. Signed-off-by: Dave Jones Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/Makefile | 1 + arch/x86/kernel/cpu/centaur_64.c | 31 +++++++++++++++++++++++++++++++ arch/x86/kernel/setup_64.c | 28 ++-------------------------- 3 files changed, 34 insertions(+), 26 deletions(-) create mode 100644 arch/x86/kernel/cpu/centaur_64.c diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index b7a11924fed7..c77a1c50d944 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_X86_32) += amd.o obj-$(CONFIG_X86_64) += amd_64.o obj-$(CONFIG_X86_32) += cyrix.o obj-$(CONFIG_X86_32) += centaur.o +obj-$(CONFIG_X86_64) += centaur_64.o obj-$(CONFIG_X86_32) += transmeta.o obj-$(CONFIG_X86_32) += intel.o obj-$(CONFIG_X86_64) += intel_64.o diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c new file mode 100644 index 000000000000..bac96d187d05 --- /dev/null +++ b/arch/x86/kernel/cpu/centaur_64.c @@ -0,0 +1,31 @@ +#include +#include + +#include +#include + +void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) +{ + if (c->x86 == 0x6 && c->x86_model >= 0xf) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +} + +void __cpuinit init_centaur(struct cpuinfo_x86 *c) +{ + /* Cache sizes */ + unsigned n; + + n = c->extended_cpuid_level; + if (n >= 0x80000008) { + unsigned eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + } + + if (c->x86 == 0x6 && c->x86_model >= 0xf) { + c->x86_cache_alignment = c->x86_clflush_size * 2; + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + } + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); +} diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index c4e6a0b6c303..25afdd80a3cf 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -622,32 +622,6 @@ out: #endif } -static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) -{ - if (c->x86 == 0x6 && c->x86_model >= 0xf) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); -} - -static void __cpuinit init_centaur(struct cpuinfo_x86 *c) -{ - /* Cache sizes */ - unsigned n; - - n = c->extended_cpuid_level; - if (n >= 0x80000008) { - unsigned eax = cpuid_eax(0x80000008); - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - } - - if (c->x86 == 0x6 && c->x86_model >= 0xf) { - c->x86_cache_alignment = c->x86_clflush_size * 2; - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - } - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); -} - static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { char *v = c->x86_vendor_id; @@ -667,6 +641,8 @@ extern void __cpuinit early_init_amd(struct cpuinfo_x86 *c); extern void __cpuinit init_amd(struct cpuinfo_x86 *c); extern void __cpuinit early_init_intel(struct cpuinfo_x86 *c); extern void __cpuinit init_intel(struct cpuinfo_x86 *c); +extern void __cpuinit early_init_centaur(struct cpuinfo_x86 *c); +extern void __cpuinit init_centaur(struct cpuinfo_x86 *c); /* Do some early cpuid on the boot CPU to get some parameter that are needed before check_bugs. Everything advanced is in identify_cpu -- cgit v1.2.3 From 1c47cd638e8302bc38be1f6d81067950e038ebd3 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 30 May 2008 15:42:45 -0700 Subject: x86: fix overlong line in arch/x86/kernel/cpu/amd_64.c Clean up an overlong line in arch/x86/kernel/cpu/amd_64.c. Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/amd_64.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c index 1746f6f95726..c815c2c0484b 100644 --- a/arch/x86/kernel/cpu/amd_64.c +++ b/arch/x86/kernel/cpu/amd_64.c @@ -229,7 +229,8 @@ void __cpuinit init_amd(struct cpuinfo_x86 *c) * benefit in doing so. */ if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) && - (tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) + (tseg >> PMD_SHIFT) < + (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT))) set_memory_4k((unsigned long)__va(tseg), 1); } } -- cgit v1.2.3 From 23968f71b26ece45ed52895d41b0208b90a516e7 Mon Sep 17 00:00:00 2001 From: Kristian Høgsberg Date: Thu, 29 May 2008 18:31:14 -0400 Subject: x86: Use structs instead of hardcoded offsets in x86 boot decompressor. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Replace hardcoded offsets embedded in macros in arch/x86/boot/compressed with proper structure references. Signed-off-by: Kristian Høgsberg Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/misc.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 90456cee47c3..74ed3c075ee6 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -30,6 +30,7 @@ #include #include #include +#include /* WARNING!! * This code is compiled with -fPIC and it is relocated dynamically @@ -187,13 +188,7 @@ static void gzip_release(void **); /* * This is set up by the setup-routine at boot-time */ -static unsigned char *real_mode; /* Pointer to real-mode data */ - -#define RM_EXT_MEM_K (*(unsigned short *)(real_mode + 0x2)) -#ifndef STANDARD_MEMORY_BIOS_CALL -#define RM_ALT_MEM_K (*(unsigned long *)(real_mode + 0x1e0)) -#endif -#define RM_SCREEN_INFO (*(struct screen_info *)(real_mode+0)) +static struct boot_params *real_mode; /* Pointer to real-mode data */ extern unsigned char input_data[]; extern int input_len; @@ -276,12 +271,13 @@ static void putstr(const char *s) char c; #ifdef CONFIG_X86_32 - if (RM_SCREEN_INFO.orig_video_mode == 0 && lines == 0 && cols == 0) + if (real_mode->screen_info.orig_video_mode == 0 && + lines == 0 && cols == 0) return; #endif - x = RM_SCREEN_INFO.orig_x; - y = RM_SCREEN_INFO.orig_y; + x = real_mode->screen_info.orig_x; + y = real_mode->screen_info.orig_y; while ((c = *s++) != '\0') { if (c == '\n') { @@ -302,8 +298,8 @@ static void putstr(const char *s) } } - RM_SCREEN_INFO.orig_x = x; - RM_SCREEN_INFO.orig_y = y; + real_mode->screen_info.orig_x = x; + real_mode->screen_info.orig_y = y; pos = (x + cols * y) * 2; /* Update cursor position */ outb(14, vidport); @@ -430,7 +426,7 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, { real_mode = rmode; - if (RM_SCREEN_INFO.orig_video_mode == 7) { + if (real_mode->screen_info.orig_video_mode == 7) { vidmem = (char *) 0xb0000; vidport = 0x3b4; } else { @@ -438,8 +434,8 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, vidport = 0x3d4; } - lines = RM_SCREEN_INFO.orig_video_lines; - cols = RM_SCREEN_INFO.orig_video_cols; + lines = real_mode->screen_info.orig_video_lines; + cols = real_mode->screen_info.orig_video_cols; window = output; /* Output buffer (Normally at 1M) */ free_mem_ptr = heap; /* Heap */ -- cgit v1.2.3 From 3b6b9293d0f8e1b11630102013ca2a1dcef17d44 Mon Sep 17 00:00:00 2001 From: Kristian Høgsberg Date: Thu, 29 May 2008 18:31:15 -0400 Subject: x86: Honor 'quiet' command line option in real mode boot decompressor. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch lets the early real mode code look for the 'quiet' option on the kernel command line and pass a loadflag to the decompressor. When this flag is set, we suppress the "Decompressing Linux... Parsing ELF... done." messages. Signed-off-by: Kristian Høgsberg Signed-off-by: H. Peter Anvin --- arch/x86/boot/compressed/misc.c | 13 ++++++++++--- arch/x86/boot/main.c | 4 ++++ include/asm-x86/bootparam.h | 1 + 3 files changed, 15 insertions(+), 3 deletions(-) diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 74ed3c075ee6..d10e7274e1fc 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -189,6 +189,7 @@ static void gzip_release(void **); * This is set up by the setup-routine at boot-time */ static struct boot_params *real_mode; /* Pointer to real-mode data */ +static int quiet; extern unsigned char input_data[]; extern int input_len; @@ -391,7 +392,8 @@ static void parse_elf(void *output) return; } - putstr("Parsing ELF... "); + if (!quiet) + putstr("Parsing ELF... "); phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum); if (!phdrs) @@ -426,6 +428,9 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, { real_mode = rmode; + if (real_mode->hdr.loadflags & QUIET_FLAG) + quiet = 1; + if (real_mode->screen_info.orig_video_mode == 7) { vidmem = (char *) 0xb0000; vidport = 0x3b4; @@ -461,9 +466,11 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, #endif makecrc(); - putstr("\nDecompressing Linux... "); + if (!quiet) + putstr("\nDecompressing Linux... "); gunzip(); parse_elf(output); - putstr("done.\nBooting the kernel.\n"); + if (!quiet) + putstr("done.\nBooting the kernel.\n"); return; } diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c index 77569a4a3be1..2296164b54d2 100644 --- a/arch/x86/boot/main.c +++ b/arch/x86/boot/main.c @@ -165,6 +165,10 @@ void main(void) /* Set the video mode */ set_video(); + /* Parse command line for 'quiet' and pass it to decompressor. */ + if (cmdline_find_option_bool("quiet")) + boot_params.hdr.loadflags |= QUIET_FLAG; + /* Do the last things and invoke protected mode */ go_to_protected_mode(); } diff --git a/include/asm-x86/bootparam.h b/include/asm-x86/bootparam.h index f62f4733606b..3e36ba8f288b 100644 --- a/include/asm-x86/bootparam.h +++ b/include/asm-x86/bootparam.h @@ -40,6 +40,7 @@ struct setup_header { __u8 type_of_loader; __u8 loadflags; #define LOADED_HIGH (1<<0) +#define QUIET_FLAG (1<<5) #define KEEP_SEGMENTS (1<<6) #define CAN_USE_HEAP (1<<7) __u16 setup_move_size; -- cgit v1.2.3 From 4039feb5bae72a5fed9ba6bc1a9cfd8dfe0a8613 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 30 May 2008 17:16:20 -0700 Subject: x86: update Documentation/i386/boot.txt Document QUIET_FLAG, correct the definition of several fields, make it clear this applies to the entire x86 architecture, not just i386. Signed-off-by: H. Peter Anvin --- Documentation/i386/boot.txt | 79 ++++++++++++++++++++++++++------------------- 1 file changed, 46 insertions(+), 33 deletions(-) diff --git a/Documentation/i386/boot.txt b/Documentation/i386/boot.txt index 95ad15c3b01f..147bfe511cdd 100644 --- a/Documentation/i386/boot.txt +++ b/Documentation/i386/boot.txt @@ -1,17 +1,14 @@ - THE LINUX/I386 BOOT PROTOCOL - ---------------------------- + THE LINUX/x86 BOOT PROTOCOL + --------------------------- - H. Peter Anvin - Last update 2007-05-23 - -On the i386 platform, the Linux kernel uses a rather complicated boot +On the x86 platform, the Linux kernel uses a rather complicated boot convention. This has evolved partially due to historical aspects, as well as the desire in the early days to have the kernel itself be a bootable image, the complicated PC memory model and due to changed expectations in the PC industry caused by the effective demise of real-mode DOS as a mainstream operating system. -Currently, the following versions of the Linux/i386 boot protocol exist. +Currently, the following versions of the Linux/x86 boot protocol exist. Old kernels: zImage/Image support only. Some very early kernels may not even support a command line. @@ -372,10 +369,17 @@ Protocol: 2.00+ - If 0, the protected-mode code is loaded at 0x10000. - If 1, the protected-mode code is loaded at 0x100000. + Bit 5 (write): QUIET_FLAG + - If 0, print early messages. + - If 1, suppress early messages. + This requests to the kernel (decompressor and early + kernel) to not write early messages that require + accessing the display hardware directly. + Bit 6 (write): KEEP_SEGMENTS Protocol: 2.07+ - - if 0, reload the segment registers in the 32bit entry point. - - if 1, do not reload the segment registers in the 32bit entry point. + - If 0, reload the segment registers in the 32bit entry point. + - If 1, do not reload the segment registers in the 32bit entry point. Assume that %cs %ds %ss %es are all set to flat segments with a base of 0 (or the equivalent for their environment). @@ -504,7 +508,7 @@ Protocol: 2.06+ maximum size was 255. Field name: hardware_subarch -Type: write +Type: write (optional, defaults to x86/PC) Offset/size: 0x23c/4 Protocol: 2.07+ @@ -520,11 +524,13 @@ Protocol: 2.07+ 0x00000002 Xen Field name: hardware_subarch_data -Type: write +Type: write (subarch-dependent) Offset/size: 0x240/8 Protocol: 2.07+ A pointer to data that is specific to hardware subarch + This field is currently unused for the default x86/PC environment, + do not modify. Field name: payload_offset Type: read @@ -545,6 +551,34 @@ Protocol: 2.08+ The length of the payload. +Field name: setup_data +Type: write (special) +Offset/size: 0x250/8 +Protocol: 2.09+ + + The 64-bit physical pointer to NULL terminated single linked list of + struct setup_data. This is used to define a more extensible boot + parameters passing mechanism. The definition of struct setup_data is + as follow: + + struct setup_data { + u64 next; + u32 type; + u32 len; + u8 data[0]; + }; + + Where, the next is a 64-bit physical pointer to the next node of + linked list, the next field of the last node is 0; the type is used + to identify the contents of data; the len is the length of data + field; the data holds the real payload. + + This list may be modified at a number of points during the bootup + process. Therefore, when modifying this list one should always make + sure to consider the case where the linked list already contains + entries. + + **** THE IMAGE CHECKSUM From boot protocol version 2.08 onwards the CRC-32 is calculated over @@ -553,6 +587,7 @@ initial remainder of 0xffffffff. The checksum is appended to the file; therefore the CRC of the file up to the limit specified in the syssize field of the header is always 0. + **** THE KERNEL COMMAND LINE The kernel command line has become an important way for the boot @@ -584,28 +619,6 @@ command line is entered using the following protocol: covered by setup_move_size, so you may need to adjust this field. -Field name: setup_data -Type: write (obligatory) -Offset/size: 0x250/8 -Protocol: 2.09+ - - The 64-bit physical pointer to NULL terminated single linked list of - struct setup_data. This is used to define a more extensible boot - parameters passing mechanism. The definition of struct setup_data is - as follow: - - struct setup_data { - u64 next; - u32 type; - u32 len; - u8 data[0]; - }; - - Where, the next is a 64-bit physical pointer to the next node of - linked list, the next field of the last node is 0; the type is used - to identify the contents of data; the len is the length of data - field; the data holds the real payload. - **** MEMORY LAYOUT OF THE REAL-MODE CODE -- cgit v1.2.3 From 23deb06821442506615f34bd92ccd6a2422629d7 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 30 May 2008 17:19:03 -0700 Subject: x86: move x86-specific documentation into Documentation/x86 The current organization of the x86 documentation makes it appear as if the "i386" documentation doesn't apply to x86-64, which is does. Thus, move that documentation into Documentation/x86, and move the x86-64-specific stuff into Documentation/x86/x86_64 with the eventual goal to move stuff that isn't actually 64-bit specific back into Documentation/x86. Signed-off-by: H. Peter Anvin --- Documentation/i386/IO-APIC.txt | 119 ---- Documentation/i386/boot.txt | 900 ------------------------- Documentation/i386/usb-legacy-support.txt | 44 -- Documentation/i386/zero-page.txt | 31 - Documentation/x86/i386/IO-APIC.txt | 119 ++++ Documentation/x86/i386/boot.txt | 900 +++++++++++++++++++++++++ Documentation/x86/i386/usb-legacy-support.txt | 44 ++ Documentation/x86/i386/zero-page.txt | 31 + Documentation/x86/x86_64/00-INDEX | 16 + Documentation/x86/x86_64/boot-options.txt | 314 +++++++++ Documentation/x86/x86_64/cpu-hotplug-spec | 21 + Documentation/x86/x86_64/fake-numa-for-cpusets | 66 ++ Documentation/x86/x86_64/kernel-stacks | 99 +++ Documentation/x86/x86_64/machinecheck | 77 +++ Documentation/x86/x86_64/mm.txt | 29 + Documentation/x86/x86_64/uefi.txt | 38 ++ Documentation/x86_64/00-INDEX | 16 - Documentation/x86_64/boot-options.txt | 314 --------- Documentation/x86_64/cpu-hotplug-spec | 21 - Documentation/x86_64/fake-numa-for-cpusets | 66 -- Documentation/x86_64/kernel-stacks | 99 --- Documentation/x86_64/machinecheck | 77 --- Documentation/x86_64/mm.txt | 29 - Documentation/x86_64/uefi.txt | 38 -- 24 files changed, 1754 insertions(+), 1754 deletions(-) delete mode 100644 Documentation/i386/IO-APIC.txt delete mode 100644 Documentation/i386/boot.txt delete mode 100644 Documentation/i386/usb-legacy-support.txt delete mode 100644 Documentation/i386/zero-page.txt create mode 100644 Documentation/x86/i386/IO-APIC.txt create mode 100644 Documentation/x86/i386/boot.txt create mode 100644 Documentation/x86/i386/usb-legacy-support.txt create mode 100644 Documentation/x86/i386/zero-page.txt create mode 100644 Documentation/x86/x86_64/00-INDEX create mode 100644 Documentation/x86/x86_64/boot-options.txt create mode 100644 Documentation/x86/x86_64/cpu-hotplug-spec create mode 100644 Documentation/x86/x86_64/fake-numa-for-cpusets create mode 100644 Documentation/x86/x86_64/kernel-stacks create mode 100644 Documentation/x86/x86_64/machinecheck create mode 100644 Documentation/x86/x86_64/mm.txt create mode 100644 Documentation/x86/x86_64/uefi.txt delete mode 100644 Documentation/x86_64/00-INDEX delete mode 100644 Documentation/x86_64/boot-options.txt delete mode 100644 Documentation/x86_64/cpu-hotplug-spec delete mode 100644 Documentation/x86_64/fake-numa-for-cpusets delete mode 100644 Documentation/x86_64/kernel-stacks delete mode 100644 Documentation/x86_64/machinecheck delete mode 100644 Documentation/x86_64/mm.txt delete mode 100644 Documentation/x86_64/uefi.txt diff --git a/Documentation/i386/IO-APIC.txt b/Documentation/i386/IO-APIC.txt deleted file mode 100644 index 30b4c714fbe1..000000000000 --- a/Documentation/i386/IO-APIC.txt +++ /dev/null @@ -1,119 +0,0 @@ -Most (all) Intel-MP compliant SMP boards have the so-called 'IO-APIC', -which is an enhanced interrupt controller. It enables us to route -hardware interrupts to multiple CPUs, or to CPU groups. Without an -IO-APIC, interrupts from hardware will be delivered only to the -CPU which boots the operating system (usually CPU#0). - -Linux supports all variants of compliant SMP boards, including ones with -multiple IO-APICs. Multiple IO-APICs are used in high-end servers to -distribute IRQ load further. - -There are (a few) known breakages in certain older boards, such bugs are -usually worked around by the kernel. If your MP-compliant SMP board does -not boot Linux, then consult the linux-smp mailing list archives first. - -If your box boots fine with enabled IO-APIC IRQs, then your -/proc/interrupts will look like this one: - - ----------------------------> - hell:~> cat /proc/interrupts - CPU0 - 0: 1360293 IO-APIC-edge timer - 1: 4 IO-APIC-edge keyboard - 2: 0 XT-PIC cascade - 13: 1 XT-PIC fpu - 14: 1448 IO-APIC-edge ide0 - 16: 28232 IO-APIC-level Intel EtherExpress Pro 10/100 Ethernet - 17: 51304 IO-APIC-level eth0 - NMI: 0 - ERR: 0 - hell:~> - <---------------------------- - -Some interrupts are still listed as 'XT PIC', but this is not a problem; -none of those IRQ sources is performance-critical. - - -In the unlikely case that your board does not create a working mp-table, -you can use the pirq= boot parameter to 'hand-construct' IRQ entries. This -is non-trivial though and cannot be automated. One sample /etc/lilo.conf -entry: - - append="pirq=15,11,10" - -The actual numbers depend on your system, on your PCI cards and on their -PCI slot position. Usually PCI slots are 'daisy chained' before they are -connected to the PCI chipset IRQ routing facility (the incoming PIRQ1-4 -lines): - - ,-. ,-. ,-. ,-. ,-. - PIRQ4 ----| |-. ,-| |-. ,-| |-. ,-| |--------| | - |S| \ / |S| \ / |S| \ / |S| |S| - PIRQ3 ----|l|-. `/---|l|-. `/---|l|-. `/---|l|--------|l| - |o| \/ |o| \/ |o| \/ |o| |o| - PIRQ2 ----|t|-./`----|t|-./`----|t|-./`----|t|--------|t| - |1| /\ |2| /\ |3| /\ |4| |5| - PIRQ1 ----| |- `----| |- `----| |- `----| |--------| | - `-' `-' `-' `-' `-' - -Every PCI card emits a PCI IRQ, which can be INTA, INTB, INTC or INTD: - - ,-. - INTD--| | - |S| - INTC--|l| - |o| - INTB--|t| - |x| - INTA--| | - `-' - -These INTA-D PCI IRQs are always 'local to the card', their real meaning -depends on which slot they are in. If you look at the daisy chaining diagram, -a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ4 of -the PCI chipset. Most cards issue INTA, this creates optimal distribution -between the PIRQ lines. (distributing IRQ sources properly is not a -necessity, PCI IRQs can be shared at will, but it's a good for performance -to have non shared interrupts). Slot5 should be used for videocards, they -do not use interrupts normally, thus they are not daisy chained either. - -so if you have your SCSI card (IRQ11) in Slot1, Tulip card (IRQ9) in -Slot2, then you'll have to specify this pirq= line: - - append="pirq=11,9" - -the following script tries to figure out such a default pirq= line from -your PCI configuration: - - echo -n pirq=; echo `scanpci | grep T_L | cut -c56-` | sed 's/ /,/g' - -note that this script wont work if you have skipped a few slots or if your -board does not do default daisy-chaining. (or the IO-APIC has the PIRQ pins -connected in some strange way). E.g. if in the above case you have your SCSI -card (IRQ11) in Slot3, and have Slot1 empty: - - append="pirq=0,9,11" - -[value '0' is a generic 'placeholder', reserved for empty (or non-IRQ emitting) -slots.] - -Generally, it's always possible to find out the correct pirq= settings, just -permute all IRQ numbers properly ... it will take some time though. An -'incorrect' pirq line will cause the booting process to hang, or a device -won't function properly (e.g. if it's inserted as a module). - -If you have 2 PCI buses, then you can use up to 8 pirq values, although such -boards tend to have a good configuration. - -Be prepared that it might happen that you need some strange pirq line: - - append="pirq=0,0,0,0,0,0,9,11" - -Use smart trial-and-error techniques to find out the correct pirq line ... - -Good luck and mail to linux-smp@vger.kernel.org or -linux-kernel@vger.kernel.org if you have any problems that are not covered -by this document. - --- mingo - diff --git a/Documentation/i386/boot.txt b/Documentation/i386/boot.txt deleted file mode 100644 index 147bfe511cdd..000000000000 --- a/Documentation/i386/boot.txt +++ /dev/null @@ -1,900 +0,0 @@ - THE LINUX/x86 BOOT PROTOCOL - --------------------------- - -On the x86 platform, the Linux kernel uses a rather complicated boot -convention. This has evolved partially due to historical aspects, as -well as the desire in the early days to have the kernel itself be a -bootable image, the complicated PC memory model and due to changed -expectations in the PC industry caused by the effective demise of -real-mode DOS as a mainstream operating system. - -Currently, the following versions of the Linux/x86 boot protocol exist. - -Old kernels: zImage/Image support only. Some very early kernels - may not even support a command line. - -Protocol 2.00: (Kernel 1.3.73) Added bzImage and initrd support, as - well as a formalized way to communicate between the - boot loader and the kernel. setup.S made relocatable, - although the traditional setup area still assumed - writable. - -Protocol 2.01: (Kernel 1.3.76) Added a heap overrun warning. - -Protocol 2.02: (Kernel 2.4.0-test3-pre3) New command line protocol. - Lower the conventional memory ceiling. No overwrite - of the traditional setup area, thus making booting - safe for systems which use the EBDA from SMM or 32-bit - BIOS entry points. zImage deprecated but still - supported. - -Protocol 2.03: (Kernel 2.4.18-pre1) Explicitly makes the highest possible - initrd address available to the bootloader. - -Protocol 2.04: (Kernel 2.6.14) Extend the syssize field to four bytes. - -Protocol 2.05: (Kernel 2.6.20) Make protected mode kernel relocatable. - Introduce relocatable_kernel and kernel_alignment fields. - -Protocol 2.06: (Kernel 2.6.22) Added a field that contains the size of - the boot command line. - -Protocol 2.07: (Kernel 2.6.24) Added paravirtualised boot protocol. - Introduced hardware_subarch and hardware_subarch_data - and KEEP_SEGMENTS flag in load_flags. - -Protocol 2.08: (Kernel 2.6.26) Added crc32 checksum and ELF format - payload. Introduced payload_offset and payload length - fields to aid in locating the payload. - -Protocol 2.09: (Kernel 2.6.26) Added a field of 64-bit physical - pointer to single linked list of struct setup_data. - -**** MEMORY LAYOUT - -The traditional memory map for the kernel loader, used for Image or -zImage kernels, typically looks like: - - | | -0A0000 +------------------------+ - | Reserved for BIOS | Do not use. Reserved for BIOS EBDA. -09A000 +------------------------+ - | Command line | - | Stack/heap | For use by the kernel real-mode code. -098000 +------------------------+ - | Kernel setup | The kernel real-mode code. -090200 +------------------------+ - | Kernel boot sector | The kernel legacy boot sector. -090000 +------------------------+ - | Protected-mode kernel | The bulk of the kernel image. -010000 +------------------------+ - | Boot loader | <- Boot sector entry point 0000:7C00 -001000 +------------------------+ - | Reserved for MBR/BIOS | -000800 +------------------------+ - | Typically used by MBR | -000600 +------------------------+ - | BIOS use only | -000000 +------------------------+ - - -When using bzImage, the protected-mode kernel was relocated to -0x100000 ("high memory"), and the kernel real-mode block (boot sector, -setup, and stack/heap) was made relocatable to any address between -0x10000 and end of low memory. Unfortunately, in protocols 2.00 and -2.01 the 0x90000+ memory range is still used internally by the kernel; -the 2.02 protocol resolves that problem. - -It is desirable to keep the "memory ceiling" -- the highest point in -low memory touched by the boot loader -- as low as possible, since -some newer BIOSes have begun to allocate some rather large amounts of -memory, called the Extended BIOS Data Area, near the top of low -memory. The boot loader should use the "INT 12h" BIOS call to verify -how much low memory is available. - -Unfortunately, if INT 12h reports that the amount of memory is too -low, there is usually nothing the boot loader can do but to report an -error to the user. The boot loader should therefore be designed to -take up as little space in low memory as it reasonably can. For -zImage or old bzImage kernels, which need data written into the -0x90000 segment, the boot loader should make sure not to use memory -above the 0x9A000 point; too many BIOSes will break above that point. - -For a modern bzImage kernel with boot protocol version >= 2.02, a -memory layout like the following is suggested: - - ~ ~ - | Protected-mode kernel | -100000 +------------------------+ - | I/O memory hole | -0A0000 +------------------------+ - | Reserved for BIOS | Leave as much as possible unused - ~ ~ - | Command line | (Can also be below the X+10000 mark) -X+10000 +------------------------+ - | Stack/heap | For use by the kernel real-mode code. -X+08000 +------------------------+ - | Kernel setup | The kernel real-mode code. - | Kernel boot sector | The kernel legacy boot sector. -X +------------------------+ - | Boot loader | <- Boot sector entry point 0000:7C00 -001000 +------------------------+ - | Reserved for MBR/BIOS | -000800 +------------------------+ - | Typically used by MBR | -000600 +------------------------+ - | BIOS use only | -000000 +------------------------+ - -... where the address X is as low as the design of the boot loader -permits. - - -**** THE REAL-MODE KERNEL HEADER - -In the following text, and anywhere in the kernel boot sequence, "a -sector" refers to 512 bytes. It is independent of the actual sector -size of the underlying medium. - -The first step in loading a Linux kernel should be to load the -real-mode code (boot sector and setup code) and then examine the -following header at offset 0x01f1. The real-mode code can total up to -32K, although the boot loader may choose to load only the first two -sectors (1K) and then examine the bootup sector size. - -The header looks like: - -Offset Proto Name Meaning -/Size - -01F1/1 ALL(1 setup_sects The size of the setup in sectors -01F2/2 ALL root_flags If set, the root is mounted readonly -01F4/4 2.04+(2 syssize The size of the 32-bit code in 16-byte paras -01F8/2 ALL ram_size DO NOT USE - for bootsect.S use only -01FA/2 ALL vid_mode Video mode control -01FC/2 ALL root_dev Default root device number -01FE/2 ALL boot_flag 0xAA55 magic number -0200/2 2.00+ jump Jump instruction -0202/4 2.00+ header Magic signature "HdrS" -0206/2 2.00+ version Boot protocol version supported -0208/4 2.00+ realmode_swtch Boot loader hook (see below) -020C/2 2.00+ start_sys The load-low segment (0x1000) (obsolete) -020E/2 2.00+ kernel_version Pointer to kernel version string -0210/1 2.00+ type_of_loader Boot loader identifier -0211/1 2.00+ loadflags Boot protocol option flags -0212/2 2.00+ setup_move_size Move to high memory size (used with hooks) -0214/4 2.00+ code32_start Boot loader hook (see below) -0218/4 2.00+ ramdisk_image initrd load address (set by boot loader) -021C/4 2.00+ ramdisk_size initrd size (set by boot loader) -0220/4 2.00+ bootsect_kludge DO NOT USE - for bootsect.S use only -0224/2 2.01+ heap_end_ptr Free memory after setup end -0226/2 N/A pad1 Unused -0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line -022C/4 2.03+ initrd_addr_max Highest legal initrd address -0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel -0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not -0235/3 N/A pad2 Unused -0238/4 2.06+ cmdline_size Maximum size of the kernel command line -023C/4 2.07+ hardware_subarch Hardware subarchitecture -0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data -0248/4 2.08+ payload_offset Offset of kernel payload -024C/4 2.08+ payload_length Length of kernel payload -0250/8 2.09+ setup_data 64-bit physical pointer to linked list - of struct setup_data - -(1) For backwards compatibility, if the setup_sects field contains 0, the - real value is 4. - -(2) For boot protocol prior to 2.04, the upper two bytes of the syssize - field are unusable, which means the size of a bzImage kernel - cannot be determined. - -If the "HdrS" (0x53726448) magic number is not found at offset 0x202, -the boot protocol version is "old". Loading an old kernel, the -following parameters should be assumed: - - Image type = zImage - initrd not supported - Real-mode kernel must be located at 0x90000. - -Otherwise, the "version" field contains the protocol version, -e.g. protocol version 2.01 will contain 0x0201 in this field. When -setting fields in the header, you must make sure only to set fields -supported by the protocol version in use. - - -**** DETAILS OF HEADER FIELDS - -For each field, some are information from the kernel to the bootloader -("read"), some are expected to be filled out by the bootloader -("write"), and some are expected to be read and modified by the -bootloader ("modify"). - -All general purpose boot loaders should write the fields marked -(obligatory). Boot loaders who want to load the kernel at a -nonstandard address should fill in the fields marked (reloc); other -boot loaders can ignore those fields. - -The byte order of all fields is littleendian (this is x86, after all.) - -Field name: setup_sects -Type: read -Offset/size: 0x1f1/1 -Protocol: ALL - - The size of the setup code in 512-byte sectors. If this field is - 0, the real value is 4. The real-mode code consists of the boot - sector (always one 512-byte sector) plus the setup code. - -Field name: root_flags -Type: modify (optional) -Offset/size: 0x1f2/2 -Protocol: ALL - - If this field is nonzero, the root defaults to readonly. The use of - this field is deprecated; use the "ro" or "rw" options on the - command line instead. - -Field name: syssize -Type: read -Offset/size: 0x1f4/4 (protocol 2.04+) 0x1f4/2 (protocol ALL) -Protocol: 2.04+ - - The size of the protected-mode code in units of 16-byte paragraphs. - For protocol versions older than 2.04 this field is only two bytes - wide, and therefore cannot be trusted for the size of a kernel if - the LOAD_HIGH flag is set. - -Field name: ram_size -Type: kernel internal -Offset/size: 0x1f8/2 -Protocol: ALL - - This field is obsolete. - -Field name: vid_mode -Type: modify (obligatory) -Offset/size: 0x1fa/2 - - Please see the section on SPECIAL COMMAND LINE OPTIONS. - -Field name: root_dev -Type: modify (optional) -Offset/size: 0x1fc/2 -Protocol: ALL - - The default root device device number. The use of this field is - deprecated, use the "root=" option on the command line instead. - -Field name: boot_flag -Type: read -Offset/size: 0x1fe/2 -Protocol: ALL - - Contains 0xAA55. This is the closest thing old Linux kernels have - to a magic number. - -Field name: jump -Type: read -Offset/size: 0x200/2 -Protocol: 2.00+ - - Contains an x86 jump instruction, 0xEB followed by a signed offset - relative to byte 0x202. This can be used to determine the size of - the header. - -Field name: header -Type: read -Offset/size: 0x202/4 -Protocol: 2.00+ - - Contains the magic number "HdrS" (0x53726448). - -Field name: version -Type: read -Offset/size: 0x206/2 -Protocol: 2.00+ - - Contains the boot protocol version, in (major << 8)+minor format, - e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version - 10.17. - -Field name: readmode_swtch -Type: modify (optional) -Offset/size: 0x208/4 -Protocol: 2.00+ - - Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) - -Field name: start_sys -Type: read -Offset/size: 0x20c/4 -Protocol: 2.00+ - - The load low segment (0x1000). Obsolete. - -Field name: kernel_version -Type: read -Offset/size: 0x20e/2 -Protocol: 2.00+ - - If set to a nonzero value, contains a pointer to a NUL-terminated - human-readable kernel version number string, less 0x200. This can - be used to display the kernel version to the user. This value - should be less than (0x200*setup_sects). - - For example, if this value is set to 0x1c00, the kernel version - number string can be found at offset 0x1e00 in the kernel file. - This is a valid value if and only if the "setup_sects" field - contains the value 15 or higher, as: - - 0x1c00 < 15*0x200 (= 0x1e00) but - 0x1c00 >= 14*0x200 (= 0x1c00) - - 0x1c00 >> 9 = 14, so the minimum value for setup_secs is 15. - -Field name: type_of_loader -Type: write (obligatory) -Offset/size: 0x210/1 -Protocol: 2.00+ - - If your boot loader has an assigned id (see table below), enter - 0xTV here, where T is an identifier for the boot loader and V is - a version number. Otherwise, enter 0xFF here. - - Assigned boot loader ids: - 0 LILO (0x00 reserved for pre-2.00 bootloader) - 1 Loadlin - 2 bootsect-loader (0x20, all other values reserved) - 3 SYSLINUX - 4 EtherBoot - 5 ELILO - 7 GRuB - 8 U-BOOT - 9 Xen - A Gujin - B Qemu - - Please contact if you need a bootloader ID - value assigned. - -Field name: loadflags -Type: modify (obligatory) -Offset/size: 0x211/1 -Protocol: 2.00+ - - This field is a bitmask. - - Bit 0 (read): LOADED_HIGH - - If 0, the protected-mode code is loaded at 0x10000. - - If 1, the protected-mode code is loaded at 0x100000. - - Bit 5 (write): QUIET_FLAG - - If 0, print early messages. - - If 1, suppress early messages. - This requests to the kernel (decompressor and early - kernel) to not write early messages that require - accessing the display hardware directly. - - Bit 6 (write): KEEP_SEGMENTS - Protocol: 2.07+ - - If 0, reload the segment registers in the 32bit entry point. - - If 1, do not reload the segment registers in the 32bit entry point. - Assume that %cs %ds %ss %es are all set to flat segments with - a base of 0 (or the equivalent for their environment). - - Bit 7 (write): CAN_USE_HEAP - Set this bit to 1 to indicate that the value entered in the - heap_end_ptr is valid. If this field is clear, some setup code - functionality will be disabled. - -Field name: setup_move_size -Type: modify (obligatory) -Offset/size: 0x212/2 -Protocol: 2.00-2.01 - - When using protocol 2.00 or 2.01, if the real mode kernel is not - loaded at 0x90000, it gets moved there later in the loading - sequence. Fill in this field if you want additional data (such as - the kernel command line) moved in addition to the real-mode kernel - itself. - - The unit is bytes starting with the beginning of the boot sector. - - This field is can be ignored when the protocol is 2.02 or higher, or - if the real-mode code is loaded at 0x90000. - -Field name: code32_start -Type: modify (optional, reloc) -Offset/size: 0x214/4 -Protocol: 2.00+ - - The address to jump to in protected mode. This defaults to the load - address of the kernel, and can be used by the boot loader to - determine the proper load address. - - This field can be modified for two purposes: - - 1. as a boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) - - 2. if a bootloader which does not install a hook loads a - relocatable kernel at a nonstandard address it will have to modify - this field to point to the load address. - -Field name: ramdisk_image -Type: write (obligatory) -Offset/size: 0x218/4 -Protocol: 2.00+ - - The 32-bit linear address of the initial ramdisk or ramfs. Leave at - zero if there is no initial ramdisk/ramfs. - -Field name: ramdisk_size -Type: write (obligatory) -Offset/size: 0x21c/4 -Protocol: 2.00+ - - Size of the initial ramdisk or ramfs. Leave at zero if there is no - initial ramdisk/ramfs. - -Field name: bootsect_kludge -Type: kernel internal -Offset/size: 0x220/4 -Protocol: 2.00+ - - This field is obsolete. - -Field name: heap_end_ptr -Type: write (obligatory) -Offset/size: 0x224/2 -Protocol: 2.01+ - - Set this field to the offset (from the beginning of the real-mode - code) of the end of the setup stack/heap, minus 0x0200. - -Field name: cmd_line_ptr -Type: write (obligatory) -Offset/size: 0x228/4 -Protocol: 2.02+ - - Set this field to the linear address of the kernel command line. - The kernel command line can be located anywhere between the end of - the setup heap and 0xA0000; it does not have to be located in the - same 64K segment as the real-mode code itself. - - Fill in this field even if your boot loader does not support a - command line, in which case you can point this to an empty string - (or better yet, to the string "auto".) If this field is left at - zero, the kernel will assume that your boot loader does not support - the 2.02+ protocol. - -Field name: initrd_addr_max -Type: read -Offset/size: 0x22c/4 -Protocol: 2.03+ - - The maximum address that may be occupied by the initial - ramdisk/ramfs contents. For boot protocols 2.02 or earlier, this - field is not present, and the maximum address is 0x37FFFFFF. (This - address is defined as the address of the highest safe byte, so if - your ramdisk is exactly 131072 bytes long and this field is - 0x37FFFFFF, you can start your ramdisk at 0x37FE0000.) - -Field name: kernel_alignment -Type: read (reloc) -Offset/size: 0x230/4 -Protocol: 2.05+ - - Alignment unit required by the kernel (if relocatable_kernel is true.) - -Field name: relocatable_kernel -Type: read (reloc) -Offset/size: 0x234/1 -Protocol: 2.05+ - - If this field is nonzero, the protected-mode part of the kernel can - be loaded at any address that satisfies the kernel_alignment field. - After loading, the boot loader must set the code32_start field to - point to the loaded code, or to a boot loader hook. - -Field name: cmdline_size -Type: read -Offset/size: 0x238/4 -Protocol: 2.06+ - - The maximum size of the command line without the terminating - zero. This means that the command line can contain at most - cmdline_size characters. With protocol version 2.05 and earlier, the - maximum size was 255. - -Field name: hardware_subarch -Type: write (optional, defaults to x86/PC) -Offset/size: 0x23c/4 -Protocol: 2.07+ - - In a paravirtualized environment the hardware low level architectural - pieces such as interrupt handling, page table handling, and - accessing process control registers needs to be done differently. - - This field allows the bootloader to inform the kernel we are in one - one of those environments. - - 0x00000000 The default x86/PC environment - 0x00000001 lguest - 0x00000002 Xen - -Field name: hardware_subarch_data -Type: write (subarch-dependent) -Offset/size: 0x240/8 -Protocol: 2.07+ - - A pointer to data that is specific to hardware subarch - This field is currently unused for the default x86/PC environment, - do not modify. - -Field name: payload_offset -Type: read -Offset/size: 0x248/4 -Protocol: 2.08+ - - If non-zero then this field contains the offset from the end of the - real-mode code to the payload. - - The payload may be compressed. The format of both the compressed and - uncompressed data should be determined using the standard magic - numbers. Currently only gzip compressed ELF is used. - -Field name: payload_length -Type: read -Offset/size: 0x24c/4 -Protocol: 2.08+ - - The length of the payload. - -Field name: setup_data -Type: write (special) -Offset/size: 0x250/8 -Protocol: 2.09+ - - The 64-bit physical pointer to NULL terminated single linked list of - struct setup_data. This is used to define a more extensible boot - parameters passing mechanism. The definition of struct setup_data is - as follow: - - struct setup_data { - u64 next; - u32 type; - u32 len; - u8 data[0]; - }; - - Where, the next is a 64-bit physical pointer to the next node of - linked list, the next field of the last node is 0; the type is used - to identify the contents of data; the len is the length of data - field; the data holds the real payload. - - This list may be modified at a number of points during the bootup - process. Therefore, when modifying this list one should always make - sure to consider the case where the linked list already contains - entries. - - -**** THE IMAGE CHECKSUM - -From boot protocol version 2.08 onwards the CRC-32 is calculated over -the entire file using the characteristic polynomial 0x04C11DB7 and an -initial remainder of 0xffffffff. The checksum is appended to the -file; therefore the CRC of the file up to the limit specified in the -syssize field of the header is always 0. - - -**** THE KERNEL COMMAND LINE - -The kernel command line has become an important way for the boot -loader to communicate with the kernel. Some of its options are also -relevant to the boot loader itself, see "special command line options" -below. - -The kernel command line is a null-terminated string. The maximum -length can be retrieved from the field cmdline_size. Before protocol -version 2.06, the maximum was 255 characters. A string that is too -long will be automatically truncated by the kernel. - -If the boot protocol version is 2.02 or later, the address of the -kernel command line is given by the header field cmd_line_ptr (see -above.) This address can be anywhere between the end of the setup -heap and 0xA0000. - -If the protocol version is *not* 2.02 or higher, the kernel -command line is entered using the following protocol: - - At offset 0x0020 (word), "cmd_line_magic", enter the magic - number 0xA33F. - - At offset 0x0022 (word), "cmd_line_offset", enter the offset - of the kernel command line (relative to the start of the - real-mode kernel). - - The kernel command line *must* be within the memory region - covered by setup_move_size, so you may need to adjust this - field. - - -**** MEMORY LAYOUT OF THE REAL-MODE CODE - -The real-mode code requires a stack/heap to be set up, as well as -memory allocated for the kernel command line. This needs to be done -in the real-mode accessible memory in bottom megabyte. - -It should be noted that modern machines often have a sizable Extended -BIOS Data Area (EBDA). As a result, it is advisable to use as little -of the low megabyte as possible. - -Unfortunately, under the following circumstances the 0x90000 memory -segment has to be used: - - - When loading a zImage kernel ((loadflags & 0x01) == 0). - - When loading a 2.01 or earlier boot protocol kernel. - - -> For the 2.00 and 2.01 boot protocols, the real-mode code - can be loaded at another address, but it is internally - relocated to 0x90000. For the "old" protocol, the - real-mode code must be loaded at 0x90000. - -When loading at 0x90000, avoid using memory above 0x9a000. - -For boot protocol 2.02 or higher, the command line does not have to be -located in the same 64K segment as the real-mode setup code; it is -thus permitted to give the stack/heap the full 64K segment and locate -the command line above it. - -The kernel command line should not be located below the real-mode -code, nor should it be located in high memory. - - -**** SAMPLE BOOT CONFIGURATION - -As a sample configuration, assume the following layout of the real -mode segment: - - When loading below 0x90000, use the entire segment: - - 0x0000-0x7fff Real mode kernel - 0x8000-0xdfff Stack and heap - 0xe000-0xffff Kernel command line - - When loading at 0x90000 OR the protocol version is 2.01 or earlier: - - 0x0000-0x7fff Real mode kernel - 0x8000-0x97ff Stack and heap - 0x9800-0x9fff Kernel command line - -Such a boot loader should enter the following fields in the header: - - unsigned long base_ptr; /* base address for real-mode segment */ - - if ( setup_sects == 0 ) { - setup_sects = 4; - } - - if ( protocol >= 0x0200 ) { - type_of_loader = ; - if ( loading_initrd ) { - ramdisk_image = ; - ramdisk_size = ; - } - - if ( protocol >= 0x0202 && loadflags & 0x01 ) - heap_end = 0xe000; - else - heap_end = 0x9800; - - if ( protocol >= 0x0201 ) { - heap_end_ptr = heap_end - 0x200; - loadflags |= 0x80; /* CAN_USE_HEAP */ - } - - if ( protocol >= 0x0202 ) { - cmd_line_ptr = base_ptr + heap_end; - strcpy(cmd_line_ptr, cmdline); - } else { - cmd_line_magic = 0xA33F; - cmd_line_offset = heap_end; - setup_move_size = heap_end + strlen(cmdline)+1; - strcpy(base_ptr+cmd_line_offset, cmdline); - } - } else { - /* Very old kernel */ - - heap_end = 0x9800; - - cmd_line_magic = 0xA33F; - cmd_line_offset = heap_end; - - /* A very old kernel MUST have its real-mode code - loaded at 0x90000 */ - - if ( base_ptr != 0x90000 ) { - /* Copy the real-mode kernel */ - memcpy(0x90000, base_ptr, (setup_sects+1)*512); - base_ptr = 0x90000; /* Relocated */ - } - - strcpy(0x90000+cmd_line_offset, cmdline); - - /* It is recommended to clear memory up to the 32K mark */ - memset(0x90000 + (setup_sects+1)*512, 0, - (64-(setup_sects+1))*512); - } - - -**** LOADING THE REST OF THE KERNEL - -The 32-bit (non-real-mode) kernel starts at offset (setup_sects+1)*512 -in the kernel file (again, if setup_sects == 0 the real value is 4.) -It should be loaded at address 0x10000 for Image/zImage kernels and -0x100000 for bzImage kernels. - -The kernel is a bzImage kernel if the protocol >= 2.00 and the 0x01 -bit (LOAD_HIGH) in the loadflags field is set: - - is_bzImage = (protocol >= 0x0200) && (loadflags & 0x01); - load_address = is_bzImage ? 0x100000 : 0x10000; - -Note that Image/zImage kernels can be up to 512K in size, and thus use -the entire 0x10000-0x90000 range of memory. This means it is pretty -much a requirement for these kernels to load the real-mode part at -0x90000. bzImage kernels allow much more flexibility. - - -**** SPECIAL COMMAND LINE OPTIONS - -If the command line provided by the boot loader is entered by the -user, the user may expect the following command line options to work. -They should normally not be deleted from the kernel command line even -though not all of them are actually meaningful to the kernel. Boot -loader authors who need additional command line options for the boot -loader itself should get them registered in -Documentation/kernel-parameters.txt to make sure they will not -conflict with actual kernel options now or in the future. - - vga= - here is either an integer (in C notation, either - decimal, octal, or hexadecimal) or one of the strings - "normal" (meaning 0xFFFF), "ext" (meaning 0xFFFE) or "ask" - (meaning 0xFFFD). This value should be entered into the - vid_mode field, as it is used by the kernel before the command - line is parsed. - - mem= - is an integer in C notation optionally followed by - (case insensitive) K, M, G, T, P or E (meaning << 10, << 20, - << 30, << 40, << 50 or << 60). This specifies the end of - memory to the kernel. This affects the possible placement of - an initrd, since an initrd should be placed near end of - memory. Note that this is an option to *both* the kernel and - the bootloader! - - initrd= - An initrd should be loaded. The meaning of is - obviously bootloader-dependent, and some boot loaders - (e.g. LILO) do not have such a command. - -In addition, some boot loaders add the following options to the -user-specified command line: - - BOOT_IMAGE= - The boot image which was loaded. Again, the meaning of - is obviously bootloader-dependent. - - auto - The kernel was booted without explicit user intervention. - -If these options are added by the boot loader, it is highly -recommended that they are located *first*, before the user-specified -or configuration-specified command line. Otherwise, "init=/bin/sh" -gets confused by the "auto" option. - - -**** RUNNING THE KERNEL - -The kernel is started by jumping to the kernel entry point, which is -located at *segment* offset 0x20 from the start of the real mode -kernel. This means that if you loaded your real-mode kernel code at -0x90000, the kernel entry point is 9020:0000. - -At entry, ds = es = ss should point to the start of the real-mode -kernel code (0x9000 if the code is loaded at 0x90000), sp should be -set up properly, normally pointing to the top of the heap, and -interrupts should be disabled. Furthermore, to guard against bugs in -the kernel, it is recommended that the boot loader sets fs = gs = ds = -es = ss. - -In our example from above, we would do: - - /* Note: in the case of the "old" kernel protocol, base_ptr must - be == 0x90000 at this point; see the previous sample code */ - - seg = base_ptr >> 4; - - cli(); /* Enter with interrupts disabled! */ - - /* Set up the real-mode kernel stack */ - _SS = seg; - _SP = heap_end; - - _DS = _ES = _FS = _GS = seg; - jmp_far(seg+0x20, 0); /* Run the kernel */ - -If your boot sector accesses a floppy drive, it is recommended to -switch off the floppy motor before running the kernel, since the -kernel boot leaves interrupts off and thus the motor will not be -switched off, especially if the loaded kernel has the floppy driver as -a demand-loaded module! - - -**** ADVANCED BOOT LOADER HOOKS - -If the boot loader runs in a particularly hostile environment (such as -LOADLIN, which runs under DOS) it may be impossible to follow the -standard memory location requirements. Such a boot loader may use the -following hooks that, if set, are invoked by the kernel at the -appropriate time. The use of these hooks should probably be -considered an absolutely last resort! - -IMPORTANT: All the hooks are required to preserve %esp, %ebp, %esi and -%edi across invocation. - - realmode_swtch: - A 16-bit real mode far subroutine invoked immediately before - entering protected mode. The default routine disables NMI, so - your routine should probably do so, too. - - code32_start: - A 32-bit flat-mode routine *jumped* to immediately after the - transition to protected mode, but before the kernel is - uncompressed. No segments, except CS, are guaranteed to be - set up (current kernels do, but older ones do not); you should - set them up to BOOT_DS (0x18) yourself. - - After completing your hook, you should jump to the address - that was in this field before your boot loader overwrote it - (relocated, if appropriate.) - - -**** 32-bit BOOT PROTOCOL - -For machine with some new BIOS other than legacy BIOS, such as EFI, -LinuxBIOS, etc, and kexec, the 16-bit real mode setup code in kernel -based on legacy BIOS can not be used, so a 32-bit boot protocol needs -to be defined. - -In 32-bit boot protocol, the first step in loading a Linux kernel -should be to setup the boot parameters (struct boot_params, -traditionally known as "zero page"). The memory for struct boot_params -should be allocated and initialized to all zero. Then the setup header -from offset 0x01f1 of kernel image on should be loaded into struct -boot_params and examined. The end of setup header can be calculated as -follow: - - 0x0202 + byte value at offset 0x0201 - -In addition to read/modify/write the setup header of the struct -boot_params as that of 16-bit boot protocol, the boot loader should -also fill the additional fields of the struct boot_params as that -described in zero-page.txt. - -After setupping the struct boot_params, the boot loader can load the -32/64-bit kernel in the same way as that of 16-bit boot protocol. - -In 32-bit boot protocol, the kernel is started by jumping to the -32-bit kernel entry point, which is the start address of loaded -32/64-bit kernel. - -At entry, the CPU must be in 32-bit protected mode with paging -disabled; a GDT must be loaded with the descriptors for selectors -__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G flat -segment; __BOOS_CS must have execute/read permission, and __BOOT_DS -must have read/write permission; CS must be __BOOT_CS and DS, ES, SS -must be __BOOT_DS; interrupt must be disabled; %esi must hold the base -address of the struct boot_params; %ebp, %edi and %ebx must be zero. diff --git a/Documentation/i386/usb-legacy-support.txt b/Documentation/i386/usb-legacy-support.txt deleted file mode 100644 index 1894cdfc69d9..000000000000 --- a/Documentation/i386/usb-legacy-support.txt +++ /dev/null @@ -1,44 +0,0 @@ -USB Legacy support -~~~~~~~~~~~~~~~~~~ - -Vojtech Pavlik , January 2004 - - -Also known as "USB Keyboard" or "USB Mouse support" in the BIOS Setup is a -feature that allows one to use the USB mouse and keyboard as if they were -their classic PS/2 counterparts. This means one can use an USB keyboard to -type in LILO for example. - -It has several drawbacks, though: - -1) On some machines, the emulated PS/2 mouse takes over even when no USB - mouse is present and a real PS/2 mouse is present. In that case the extra - features (wheel, extra buttons, touchpad mode) of the real PS/2 mouse may - not be available. - -2) If CONFIG_HIGHMEM64G is enabled, the PS/2 mouse emulation can cause - system crashes, because the SMM BIOS is not expecting to be in PAE mode. - The Intel E7505 is a typical machine where this happens. - -3) If AMD64 64-bit mode is enabled, again system crashes often happen, - because the SMM BIOS isn't expecting the CPU to be in 64-bit mode. The - BIOS manufacturers only test with Windows, and Windows doesn't do 64-bit - yet. - -Solutions: - -Problem 1) can be solved by loading the USB drivers prior to loading the -PS/2 mouse driver. Since the PS/2 mouse driver is in 2.6 compiled into -the kernel unconditionally, this means the USB drivers need to be -compiled-in, too. - -Problem 2) can currently only be solved by either disabling HIGHMEM64G -in the kernel config or USB Legacy support in the BIOS. A BIOS update -could help, but so far no such update exists. - -Problem 3) is usually fixed by a BIOS update. Check the board -manufacturers web site. If an update is not available, disable USB -Legacy support in the BIOS. If this alone doesn't help, try also adding -idle=poll on the kernel command line. The BIOS may be entering the SMM -on the HLT instruction as well. - diff --git a/Documentation/i386/zero-page.txt b/Documentation/i386/zero-page.txt deleted file mode 100644 index 169ad423a3d1..000000000000 --- a/Documentation/i386/zero-page.txt +++ /dev/null @@ -1,31 +0,0 @@ -The additional fields in struct boot_params as a part of 32-bit boot -protocol of kernel. These should be filled by bootloader or 16-bit -real-mode setup code of the kernel. References/settings to it mainly -are in: - - include/asm-x86/bootparam.h - - -Offset Proto Name Meaning -/Size - -000/040 ALL screen_info Text mode or frame buffer information - (struct screen_info) -040/014 ALL apm_bios_info APM BIOS information (struct apm_bios_info) -060/010 ALL ist_info Intel SpeedStep (IST) BIOS support information - (struct ist_info) -080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!! -090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!! -0A0/010 ALL sys_desc_table System description table (struct sys_desc_table) -140/080 ALL edid_info Video mode setup (struct edid_info) -1C0/020 ALL efi_info EFI 32 information (struct efi_info) -1E0/004 ALL alk_mem_k Alternative mem check, in KB -1E4/004 ALL scratch Scratch field for the kernel setup code -1E8/001 ALL e820_entries Number of entries in e820_map (below) -1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below) -1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer - (below) -290/040 ALL edd_mbr_sig_buffer EDD MBR signatures -2D0/A00 ALL e820_map E820 memory map table - (array of struct e820entry) -D00/1EC ALL eddbuf EDD data (array of struct edd_info) diff --git a/Documentation/x86/i386/IO-APIC.txt b/Documentation/x86/i386/IO-APIC.txt new file mode 100644 index 000000000000..30b4c714fbe1 --- /dev/null +++ b/Documentation/x86/i386/IO-APIC.txt @@ -0,0 +1,119 @@ +Most (all) Intel-MP compliant SMP boards have the so-called 'IO-APIC', +which is an enhanced interrupt controller. It enables us to route +hardware interrupts to multiple CPUs, or to CPU groups. Without an +IO-APIC, interrupts from hardware will be delivered only to the +CPU which boots the operating system (usually CPU#0). + +Linux supports all variants of compliant SMP boards, including ones with +multiple IO-APICs. Multiple IO-APICs are used in high-end servers to +distribute IRQ load further. + +There are (a few) known breakages in certain older boards, such bugs are +usually worked around by the kernel. If your MP-compliant SMP board does +not boot Linux, then consult the linux-smp mailing list archives first. + +If your box boots fine with enabled IO-APIC IRQs, then your +/proc/interrupts will look like this one: + + ----------------------------> + hell:~> cat /proc/interrupts + CPU0 + 0: 1360293 IO-APIC-edge timer + 1: 4 IO-APIC-edge keyboard + 2: 0 XT-PIC cascade + 13: 1 XT-PIC fpu + 14: 1448 IO-APIC-edge ide0 + 16: 28232 IO-APIC-level Intel EtherExpress Pro 10/100 Ethernet + 17: 51304 IO-APIC-level eth0 + NMI: 0 + ERR: 0 + hell:~> + <---------------------------- + +Some interrupts are still listed as 'XT PIC', but this is not a problem; +none of those IRQ sources is performance-critical. + + +In the unlikely case that your board does not create a working mp-table, +you can use the pirq= boot parameter to 'hand-construct' IRQ entries. This +is non-trivial though and cannot be automated. One sample /etc/lilo.conf +entry: + + append="pirq=15,11,10" + +The actual numbers depend on your system, on your PCI cards and on their +PCI slot position. Usually PCI slots are 'daisy chained' before they are +connected to the PCI chipset IRQ routing facility (the incoming PIRQ1-4 +lines): + + ,-. ,-. ,-. ,-. ,-. + PIRQ4 ----| |-. ,-| |-. ,-| |-. ,-| |--------| | + |S| \ / |S| \ / |S| \ / |S| |S| + PIRQ3 ----|l|-. `/---|l|-. `/---|l|-. `/---|l|--------|l| + |o| \/ |o| \/ |o| \/ |o| |o| + PIRQ2 ----|t|-./`----|t|-./`----|t|-./`----|t|--------|t| + |1| /\ |2| /\ |3| /\ |4| |5| + PIRQ1 ----| |- `----| |- `----| |- `----| |--------| | + `-' `-' `-' `-' `-' + +Every PCI card emits a PCI IRQ, which can be INTA, INTB, INTC or INTD: + + ,-. + INTD--| | + |S| + INTC--|l| + |o| + INTB--|t| + |x| + INTA--| | + `-' + +These INTA-D PCI IRQs are always 'local to the card', their real meaning +depends on which slot they are in. If you look at the daisy chaining diagram, +a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ4 of +the PCI chipset. Most cards issue INTA, this creates optimal distribution +between the PIRQ lines. (distributing IRQ sources properly is not a +necessity, PCI IRQs can be shared at will, but it's a good for performance +to have non shared interrupts). Slot5 should be used for videocards, they +do not use interrupts normally, thus they are not daisy chained either. + +so if you have your SCSI card (IRQ11) in Slot1, Tulip card (IRQ9) in +Slot2, then you'll have to specify this pirq= line: + + append="pirq=11,9" + +the following script tries to figure out such a default pirq= line from +your PCI configuration: + + echo -n pirq=; echo `scanpci | grep T_L | cut -c56-` | sed 's/ /,/g' + +note that this script wont work if you have skipped a few slots or if your +board does not do default daisy-chaining. (or the IO-APIC has the PIRQ pins +connected in some strange way). E.g. if in the above case you have your SCSI +card (IRQ11) in Slot3, and have Slot1 empty: + + append="pirq=0,9,11" + +[value '0' is a generic 'placeholder', reserved for empty (or non-IRQ emitting) +slots.] + +Generally, it's always possible to find out the correct pirq= settings, just +permute all IRQ numbers properly ... it will take some time though. An +'incorrect' pirq line will cause the booting process to hang, or a device +won't function properly (e.g. if it's inserted as a module). + +If you have 2 PCI buses, then you can use up to 8 pirq values, although such +boards tend to have a good configuration. + +Be prepared that it might happen that you need some strange pirq line: + + append="pirq=0,0,0,0,0,0,9,11" + +Use smart trial-and-error techniques to find out the correct pirq line ... + +Good luck and mail to linux-smp@vger.kernel.org or +linux-kernel@vger.kernel.org if you have any problems that are not covered +by this document. + +-- mingo + diff --git a/Documentation/x86/i386/boot.txt b/Documentation/x86/i386/boot.txt new file mode 100644 index 000000000000..147bfe511cdd --- /dev/null +++ b/Documentation/x86/i386/boot.txt @@ -0,0 +1,900 @@ + THE LINUX/x86 BOOT PROTOCOL + --------------------------- + +On the x86 platform, the Linux kernel uses a rather complicated boot +convention. This has evolved partially due to historical aspects, as +well as the desire in the early days to have the kernel itself be a +bootable image, the complicated PC memory model and due to changed +expectations in the PC industry caused by the effective demise of +real-mode DOS as a mainstream operating system. + +Currently, the following versions of the Linux/x86 boot protocol exist. + +Old kernels: zImage/Image support only. Some very early kernels + may not even support a command line. + +Protocol 2.00: (Kernel 1.3.73) Added bzImage and initrd support, as + well as a formalized way to communicate between the + boot loader and the kernel. setup.S made relocatable, + although the traditional setup area still assumed + writable. + +Protocol 2.01: (Kernel 1.3.76) Added a heap overrun warning. + +Protocol 2.02: (Kernel 2.4.0-test3-pre3) New command line protocol. + Lower the conventional memory ceiling. No overwrite + of the traditional setup area, thus making booting + safe for systems which use the EBDA from SMM or 32-bit + BIOS entry points. zImage deprecated but still + supported. + +Protocol 2.03: (Kernel 2.4.18-pre1) Explicitly makes the highest possible + initrd address available to the bootloader. + +Protocol 2.04: (Kernel 2.6.14) Extend the syssize field to four bytes. + +Protocol 2.05: (Kernel 2.6.20) Make protected mode kernel relocatable. + Introduce relocatable_kernel and kernel_alignment fields. + +Protocol 2.06: (Kernel 2.6.22) Added a field that contains the size of + the boot command line. + +Protocol 2.07: (Kernel 2.6.24) Added paravirtualised boot protocol. + Introduced hardware_subarch and hardware_subarch_data + and KEEP_SEGMENTS flag in load_flags. + +Protocol 2.08: (Kernel 2.6.26) Added crc32 checksum and ELF format + payload. Introduced payload_offset and payload length + fields to aid in locating the payload. + +Protocol 2.09: (Kernel 2.6.26) Added a field of 64-bit physical + pointer to single linked list of struct setup_data. + +**** MEMORY LAYOUT + +The traditional memory map for the kernel loader, used for Image or +zImage kernels, typically looks like: + + | | +0A0000 +------------------------+ + | Reserved for BIOS | Do not use. Reserved for BIOS EBDA. +09A000 +------------------------+ + | Command line | + | Stack/heap | For use by the kernel real-mode code. +098000 +------------------------+ + | Kernel setup | The kernel real-mode code. +090200 +------------------------+ + | Kernel boot sector | The kernel legacy boot sector. +090000 +------------------------+ + | Protected-mode kernel | The bulk of the kernel image. +010000 +------------------------+ + | Boot loader | <- Boot sector entry point 0000:7C00 +001000 +------------------------+ + | Reserved for MBR/BIOS | +000800 +------------------------+ + | Typically used by MBR | +000600 +------------------------+ + | BIOS use only | +000000 +------------------------+ + + +When using bzImage, the protected-mode kernel was relocated to +0x100000 ("high memory"), and the kernel real-mode block (boot sector, +setup, and stack/heap) was made relocatable to any address between +0x10000 and end of low memory. Unfortunately, in protocols 2.00 and +2.01 the 0x90000+ memory range is still used internally by the kernel; +the 2.02 protocol resolves that problem. + +It is desirable to keep the "memory ceiling" -- the highest point in +low memory touched by the boot loader -- as low as possible, since +some newer BIOSes have begun to allocate some rather large amounts of +memory, called the Extended BIOS Data Area, near the top of low +memory. The boot loader should use the "INT 12h" BIOS call to verify +how much low memory is available. + +Unfortunately, if INT 12h reports that the amount of memory is too +low, there is usually nothing the boot loader can do but to report an +error to the user. The boot loader should therefore be designed to +take up as little space in low memory as it reasonably can. For +zImage or old bzImage kernels, which need data written into the +0x90000 segment, the boot loader should make sure not to use memory +above the 0x9A000 point; too many BIOSes will break above that point. + +For a modern bzImage kernel with boot protocol version >= 2.02, a +memory layout like the following is suggested: + + ~ ~ + | Protected-mode kernel | +100000 +------------------------+ + | I/O memory hole | +0A0000 +------------------------+ + | Reserved for BIOS | Leave as much as possible unused + ~ ~ + | Command line | (Can also be below the X+10000 mark) +X+10000 +------------------------+ + | Stack/heap | For use by the kernel real-mode code. +X+08000 +------------------------+ + | Kernel setup | The kernel real-mode code. + | Kernel boot sector | The kernel legacy boot sector. +X +------------------------+ + | Boot loader | <- Boot sector entry point 0000:7C00 +001000 +------------------------+ + | Reserved for MBR/BIOS | +000800 +------------------------+ + | Typically used by MBR | +000600 +------------------------+ + | BIOS use only | +000000 +------------------------+ + +... where the address X is as low as the design of the boot loader +permits. + + +**** THE REAL-MODE KERNEL HEADER + +In the following text, and anywhere in the kernel boot sequence, "a +sector" refers to 512 bytes. It is independent of the actual sector +size of the underlying medium. + +The first step in loading a Linux kernel should be to load the +real-mode code (boot sector and setup code) and then examine the +following header at offset 0x01f1. The real-mode code can total up to +32K, although the boot loader may choose to load only the first two +sectors (1K) and then examine the bootup sector size. + +The header looks like: + +Offset Proto Name Meaning +/Size + +01F1/1 ALL(1 setup_sects The size of the setup in sectors +01F2/2 ALL root_flags If set, the root is mounted readonly +01F4/4 2.04+(2 syssize The size of the 32-bit code in 16-byte paras +01F8/2 ALL ram_size DO NOT USE - for bootsect.S use only +01FA/2 ALL vid_mode Video mode control +01FC/2 ALL root_dev Default root device number +01FE/2 ALL boot_flag 0xAA55 magic number +0200/2 2.00+ jump Jump instruction +0202/4 2.00+ header Magic signature "HdrS" +0206/2 2.00+ version Boot protocol version supported +0208/4 2.00+ realmode_swtch Boot loader hook (see below) +020C/2 2.00+ start_sys The load-low segment (0x1000) (obsolete) +020E/2 2.00+ kernel_version Pointer to kernel version string +0210/1 2.00+ type_of_loader Boot loader identifier +0211/1 2.00+ loadflags Boot protocol option flags +0212/2 2.00+ setup_move_size Move to high memory size (used with hooks) +0214/4 2.00+ code32_start Boot loader hook (see below) +0218/4 2.00+ ramdisk_image initrd load address (set by boot loader) +021C/4 2.00+ ramdisk_size initrd size (set by boot loader) +0220/4 2.00+ bootsect_kludge DO NOT USE - for bootsect.S use only +0224/2 2.01+ heap_end_ptr Free memory after setup end +0226/2 N/A pad1 Unused +0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line +022C/4 2.03+ initrd_addr_max Highest legal initrd address +0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel +0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not +0235/3 N/A pad2 Unused +0238/4 2.06+ cmdline_size Maximum size of the kernel command line +023C/4 2.07+ hardware_subarch Hardware subarchitecture +0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data +0248/4 2.08+ payload_offset Offset of kernel payload +024C/4 2.08+ payload_length Length of kernel payload +0250/8 2.09+ setup_data 64-bit physical pointer to linked list + of struct setup_data + +(1) For backwards compatibility, if the setup_sects field contains 0, the + real value is 4. + +(2) For boot protocol prior to 2.04, the upper two bytes of the syssize + field are unusable, which means the size of a bzImage kernel + cannot be determined. + +If the "HdrS" (0x53726448) magic number is not found at offset 0x202, +the boot protocol version is "old". Loading an old kernel, the +following parameters should be assumed: + + Image type = zImage + initrd not supported + Real-mode kernel must be located at 0x90000. + +Otherwise, the "version" field contains the protocol version, +e.g. protocol version 2.01 will contain 0x0201 in this field. When +setting fields in the header, you must make sure only to set fields +supported by the protocol version in use. + + +**** DETAILS OF HEADER FIELDS + +For each field, some are information from the kernel to the bootloader +("read"), some are expected to be filled out by the bootloader +("write"), and some are expected to be read and modified by the +bootloader ("modify"). + +All general purpose boot loaders should write the fields marked +(obligatory). Boot loaders who want to load the kernel at a +nonstandard address should fill in the fields marked (reloc); other +boot loaders can ignore those fields. + +The byte order of all fields is littleendian (this is x86, after all.) + +Field name: setup_sects +Type: read +Offset/size: 0x1f1/1 +Protocol: ALL + + The size of the setup code in 512-byte sectors. If this field is + 0, the real value is 4. The real-mode code consists of the boot + sector (always one 512-byte sector) plus the setup code. + +Field name: root_flags +Type: modify (optional) +Offset/size: 0x1f2/2 +Protocol: ALL + + If this field is nonzero, the root defaults to readonly. The use of + this field is deprecated; use the "ro" or "rw" options on the + command line instead. + +Field name: syssize +Type: read +Offset/size: 0x1f4/4 (protocol 2.04+) 0x1f4/2 (protocol ALL) +Protocol: 2.04+ + + The size of the protected-mode code in units of 16-byte paragraphs. + For protocol versions older than 2.04 this field is only two bytes + wide, and therefore cannot be trusted for the size of a kernel if + the LOAD_HIGH flag is set. + +Field name: ram_size +Type: kernel internal +Offset/size: 0x1f8/2 +Protocol: ALL + + This field is obsolete. + +Field name: vid_mode +Type: modify (obligatory) +Offset/size: 0x1fa/2 + + Please see the section on SPECIAL COMMAND LINE OPTIONS. + +Field name: root_dev +Type: modify (optional) +Offset/size: 0x1fc/2 +Protocol: ALL + + The default root device device number. The use of this field is + deprecated, use the "root=" option on the command line instead. + +Field name: boot_flag +Type: read +Offset/size: 0x1fe/2 +Protocol: ALL + + Contains 0xAA55. This is the closest thing old Linux kernels have + to a magic number. + +Field name: jump +Type: read +Offset/size: 0x200/2 +Protocol: 2.00+ + + Contains an x86 jump instruction, 0xEB followed by a signed offset + relative to byte 0x202. This can be used to determine the size of + the header. + +Field name: header +Type: read +Offset/size: 0x202/4 +Protocol: 2.00+ + + Contains the magic number "HdrS" (0x53726448). + +Field name: version +Type: read +Offset/size: 0x206/2 +Protocol: 2.00+ + + Contains the boot protocol version, in (major << 8)+minor format, + e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version + 10.17. + +Field name: readmode_swtch +Type: modify (optional) +Offset/size: 0x208/4 +Protocol: 2.00+ + + Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) + +Field name: start_sys +Type: read +Offset/size: 0x20c/4 +Protocol: 2.00+ + + The load low segment (0x1000). Obsolete. + +Field name: kernel_version +Type: read +Offset/size: 0x20e/2 +Protocol: 2.00+ + + If set to a nonzero value, contains a pointer to a NUL-terminated + human-readable kernel version number string, less 0x200. This can + be used to display the kernel version to the user. This value + should be less than (0x200*setup_sects). + + For example, if this value is set to 0x1c00, the kernel version + number string can be found at offset 0x1e00 in the kernel file. + This is a valid value if and only if the "setup_sects" field + contains the value 15 or higher, as: + + 0x1c00 < 15*0x200 (= 0x1e00) but + 0x1c00 >= 14*0x200 (= 0x1c00) + + 0x1c00 >> 9 = 14, so the minimum value for setup_secs is 15. + +Field name: type_of_loader +Type: write (obligatory) +Offset/size: 0x210/1 +Protocol: 2.00+ + + If your boot loader has an assigned id (see table below), enter + 0xTV here, where T is an identifier for the boot loader and V is + a version number. Otherwise, enter 0xFF here. + + Assigned boot loader ids: + 0 LILO (0x00 reserved for pre-2.00 bootloader) + 1 Loadlin + 2 bootsect-loader (0x20, all other values reserved) + 3 SYSLINUX + 4 EtherBoot + 5 ELILO + 7 GRuB + 8 U-BOOT + 9 Xen + A Gujin + B Qemu + + Please contact if you need a bootloader ID + value assigned. + +Field name: loadflags +Type: modify (obligatory) +Offset/size: 0x211/1 +Protocol: 2.00+ + + This field is a bitmask. + + Bit 0 (read): LOADED_HIGH + - If 0, the protected-mode code is loaded at 0x10000. + - If 1, the protected-mode code is loaded at 0x100000. + + Bit 5 (write): QUIET_FLAG + - If 0, print early messages. + - If 1, suppress early messages. + This requests to the kernel (decompressor and early + kernel) to not write early messages that require + accessing the display hardware directly. + + Bit 6 (write): KEEP_SEGMENTS + Protocol: 2.07+ + - If 0, reload the segment registers in the 32bit entry point. + - If 1, do not reload the segment registers in the 32bit entry point. + Assume that %cs %ds %ss %es are all set to flat segments with + a base of 0 (or the equivalent for their environment). + + Bit 7 (write): CAN_USE_HEAP + Set this bit to 1 to indicate that the value entered in the + heap_end_ptr is valid. If this field is clear, some setup code + functionality will be disabled. + +Field name: setup_move_size +Type: modify (obligatory) +Offset/size: 0x212/2 +Protocol: 2.00-2.01 + + When using protocol 2.00 or 2.01, if the real mode kernel is not + loaded at 0x90000, it gets moved there later in the loading + sequence. Fill in this field if you want additional data (such as + the kernel command line) moved in addition to the real-mode kernel + itself. + + The unit is bytes starting with the beginning of the boot sector. + + This field is can be ignored when the protocol is 2.02 or higher, or + if the real-mode code is loaded at 0x90000. + +Field name: code32_start +Type: modify (optional, reloc) +Offset/size: 0x214/4 +Protocol: 2.00+ + + The address to jump to in protected mode. This defaults to the load + address of the kernel, and can be used by the boot loader to + determine the proper load address. + + This field can be modified for two purposes: + + 1. as a boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) + + 2. if a bootloader which does not install a hook loads a + relocatable kernel at a nonstandard address it will have to modify + this field to point to the load address. + +Field name: ramdisk_image +Type: write (obligatory) +Offset/size: 0x218/4 +Protocol: 2.00+ + + The 32-bit linear address of the initial ramdisk or ramfs. Leave at + zero if there is no initial ramdisk/ramfs. + +Field name: ramdisk_size +Type: write (obligatory) +Offset/size: 0x21c/4 +Protocol: 2.00+ + + Size of the initial ramdisk or ramfs. Leave at zero if there is no + initial ramdisk/ramfs. + +Field name: bootsect_kludge +Type: kernel internal +Offset/size: 0x220/4 +Protocol: 2.00+ + + This field is obsolete. + +Field name: heap_end_ptr +Type: write (obligatory) +Offset/size: 0x224/2 +Protocol: 2.01+ + + Set this field to the offset (from the beginning of the real-mode + code) of the end of the setup stack/heap, minus 0x0200. + +Field name: cmd_line_ptr +Type: write (obligatory) +Offset/size: 0x228/4 +Protocol: 2.02+ + + Set this field to the linear address of the kernel command line. + The kernel command line can be located anywhere between the end of + the setup heap and 0xA0000; it does not have to be located in the + same 64K segment as the real-mode code itself. + + Fill in this field even if your boot loader does not support a + command line, in which case you can point this to an empty string + (or better yet, to the string "auto".) If this field is left at + zero, the kernel will assume that your boot loader does not support + the 2.02+ protocol. + +Field name: initrd_addr_max +Type: read +Offset/size: 0x22c/4 +Protocol: 2.03+ + + The maximum address that may be occupied by the initial + ramdisk/ramfs contents. For boot protocols 2.02 or earlier, this + field is not present, and the maximum address is 0x37FFFFFF. (This + address is defined as the address of the highest safe byte, so if + your ramdisk is exactly 131072 bytes long and this field is + 0x37FFFFFF, you can start your ramdisk at 0x37FE0000.) + +Field name: kernel_alignment +Type: read (reloc) +Offset/size: 0x230/4 +Protocol: 2.05+ + + Alignment unit required by the kernel (if relocatable_kernel is true.) + +Field name: relocatable_kernel +Type: read (reloc) +Offset/size: 0x234/1 +Protocol: 2.05+ + + If this field is nonzero, the protected-mode part of the kernel can + be loaded at any address that satisfies the kernel_alignment field. + After loading, the boot loader must set the code32_start field to + point to the loaded code, or to a boot loader hook. + +Field name: cmdline_size +Type: read +Offset/size: 0x238/4 +Protocol: 2.06+ + + The maximum size of the command line without the terminating + zero. This means that the command line can contain at most + cmdline_size characters. With protocol version 2.05 and earlier, the + maximum size was 255. + +Field name: hardware_subarch +Type: write (optional, defaults to x86/PC) +Offset/size: 0x23c/4 +Protocol: 2.07+ + + In a paravirtualized environment the hardware low level architectural + pieces such as interrupt handling, page table handling, and + accessing process control registers needs to be done differently. + + This field allows the bootloader to inform the kernel we are in one + one of those environments. + + 0x00000000 The default x86/PC environment + 0x00000001 lguest + 0x00000002 Xen + +Field name: hardware_subarch_data +Type: write (subarch-dependent) +Offset/size: 0x240/8 +Protocol: 2.07+ + + A pointer to data that is specific to hardware subarch + This field is currently unused for the default x86/PC environment, + do not modify. + +Field name: payload_offset +Type: read +Offset/size: 0x248/4 +Protocol: 2.08+ + + If non-zero then this field contains the offset from the end of the + real-mode code to the payload. + + The payload may be compressed. The format of both the compressed and + uncompressed data should be determined using the standard magic + numbers. Currently only gzip compressed ELF is used. + +Field name: payload_length +Type: read +Offset/size: 0x24c/4 +Protocol: 2.08+ + + The length of the payload. + +Field name: setup_data +Type: write (special) +Offset/size: 0x250/8 +Protocol: 2.09+ + + The 64-bit physical pointer to NULL terminated single linked list of + struct setup_data. This is used to define a more extensible boot + parameters passing mechanism. The definition of struct setup_data is + as follow: + + struct setup_data { + u64 next; + u32 type; + u32 len; + u8 data[0]; + }; + + Where, the next is a 64-bit physical pointer to the next node of + linked list, the next field of the last node is 0; the type is used + to identify the contents of data; the len is the length of data + field; the data holds the real payload. + + This list may be modified at a number of points during the bootup + process. Therefore, when modifying this list one should always make + sure to consider the case where the linked list already contains + entries. + + +**** THE IMAGE CHECKSUM + +From boot protocol version 2.08 onwards the CRC-32 is calculated over +the entire file using the characteristic polynomial 0x04C11DB7 and an +initial remainder of 0xffffffff. The checksum is appended to the +file; therefore the CRC of the file up to the limit specified in the +syssize field of the header is always 0. + + +**** THE KERNEL COMMAND LINE + +The kernel command line has become an important way for the boot +loader to communicate with the kernel. Some of its options are also +relevant to the boot loader itself, see "special command line options" +below. + +The kernel command line is a null-terminated string. The maximum +length can be retrieved from the field cmdline_size. Before protocol +version 2.06, the maximum was 255 characters. A string that is too +long will be automatically truncated by the kernel. + +If the boot protocol version is 2.02 or later, the address of the +kernel command line is given by the header field cmd_line_ptr (see +above.) This address can be anywhere between the end of the setup +heap and 0xA0000. + +If the protocol version is *not* 2.02 or higher, the kernel +command line is entered using the following protocol: + + At offset 0x0020 (word), "cmd_line_magic", enter the magic + number 0xA33F. + + At offset 0x0022 (word), "cmd_line_offset", enter the offset + of the kernel command line (relative to the start of the + real-mode kernel). + + The kernel command line *must* be within the memory region + covered by setup_move_size, so you may need to adjust this + field. + + +**** MEMORY LAYOUT OF THE REAL-MODE CODE + +The real-mode code requires a stack/heap to be set up, as well as +memory allocated for the kernel command line. This needs to be done +in the real-mode accessible memory in bottom megabyte. + +It should be noted that modern machines often have a sizable Extended +BIOS Data Area (EBDA). As a result, it is advisable to use as little +of the low megabyte as possible. + +Unfortunately, under the following circumstances the 0x90000 memory +segment has to be used: + + - When loading a zImage kernel ((loadflags & 0x01) == 0). + - When loading a 2.01 or earlier boot protocol kernel. + + -> For the 2.00 and 2.01 boot protocols, the real-mode code + can be loaded at another address, but it is internally + relocated to 0x90000. For the "old" protocol, the + real-mode code must be loaded at 0x90000. + +When loading at 0x90000, avoid using memory above 0x9a000. + +For boot protocol 2.02 or higher, the command line does not have to be +located in the same 64K segment as the real-mode setup code; it is +thus permitted to give the stack/heap the full 64K segment and locate +the command line above it. + +The kernel command line should not be located below the real-mode +code, nor should it be located in high memory. + + +**** SAMPLE BOOT CONFIGURATION + +As a sample configuration, assume the following layout of the real +mode segment: + + When loading below 0x90000, use the entire segment: + + 0x0000-0x7fff Real mode kernel + 0x8000-0xdfff Stack and heap + 0xe000-0xffff Kernel command line + + When loading at 0x90000 OR the protocol version is 2.01 or earlier: + + 0x0000-0x7fff Real mode kernel + 0x8000-0x97ff Stack and heap + 0x9800-0x9fff Kernel command line + +Such a boot loader should enter the following fields in the header: + + unsigned long base_ptr; /* base address for real-mode segment */ + + if ( setup_sects == 0 ) { + setup_sects = 4; + } + + if ( protocol >= 0x0200 ) { + type_of_loader = ; + if ( loading_initrd ) { + ramdisk_image = ; + ramdisk_size = ; + } + + if ( protocol >= 0x0202 && loadflags & 0x01 ) + heap_end = 0xe000; + else + heap_end = 0x9800; + + if ( protocol >= 0x0201 ) { + heap_end_ptr = heap_end - 0x200; + loadflags |= 0x80; /* CAN_USE_HEAP */ + } + + if ( protocol >= 0x0202 ) { + cmd_line_ptr = base_ptr + heap_end; + strcpy(cmd_line_ptr, cmdline); + } else { + cmd_line_magic = 0xA33F; + cmd_line_offset = heap_end; + setup_move_size = heap_end + strlen(cmdline)+1; + strcpy(base_ptr+cmd_line_offset, cmdline); + } + } else { + /* Very old kernel */ + + heap_end = 0x9800; + + cmd_line_magic = 0xA33F; + cmd_line_offset = heap_end; + + /* A very old kernel MUST have its real-mode code + loaded at 0x90000 */ + + if ( base_ptr != 0x90000 ) { + /* Copy the real-mode kernel */ + memcpy(0x90000, base_ptr, (setup_sects+1)*512); + base_ptr = 0x90000; /* Relocated */ + } + + strcpy(0x90000+cmd_line_offset, cmdline); + + /* It is recommended to clear memory up to the 32K mark */ + memset(0x90000 + (setup_sects+1)*512, 0, + (64-(setup_sects+1))*512); + } + + +**** LOADING THE REST OF THE KERNEL + +The 32-bit (non-real-mode) kernel starts at offset (setup_sects+1)*512 +in the kernel file (again, if setup_sects == 0 the real value is 4.) +It should be loaded at address 0x10000 for Image/zImage kernels and +0x100000 for bzImage kernels. + +The kernel is a bzImage kernel if the protocol >= 2.00 and the 0x01 +bit (LOAD_HIGH) in the loadflags field is set: + + is_bzImage = (protocol >= 0x0200) && (loadflags & 0x01); + load_address = is_bzImage ? 0x100000 : 0x10000; + +Note that Image/zImage kernels can be up to 512K in size, and thus use +the entire 0x10000-0x90000 range of memory. This means it is pretty +much a requirement for these kernels to load the real-mode part at +0x90000. bzImage kernels allow much more flexibility. + + +**** SPECIAL COMMAND LINE OPTIONS + +If the command line provided by the boot loader is entered by the +user, the user may expect the following command line options to work. +They should normally not be deleted from the kernel command line even +though not all of them are actually meaningful to the kernel. Boot +loader authors who need additional command line options for the boot +loader itself should get them registered in +Documentation/kernel-parameters.txt to make sure they will not +conflict with actual kernel options now or in the future. + + vga= + here is either an integer (in C notation, either + decimal, octal, or hexadecimal) or one of the strings + "normal" (meaning 0xFFFF), "ext" (meaning 0xFFFE) or "ask" + (meaning 0xFFFD). This value should be entered into the + vid_mode field, as it is used by the kernel before the command + line is parsed. + + mem= + is an integer in C notation optionally followed by + (case insensitive) K, M, G, T, P or E (meaning << 10, << 20, + << 30, << 40, << 50 or << 60). This specifies the end of + memory to the kernel. This affects the possible placement of + an initrd, since an initrd should be placed near end of + memory. Note that this is an option to *both* the kernel and + the bootloader! + + initrd= + An initrd should be loaded. The meaning of is + obviously bootloader-dependent, and some boot loaders + (e.g. LILO) do not have such a command. + +In addition, some boot loaders add the following options to the +user-specified command line: + + BOOT_IMAGE= + The boot image which was loaded. Again, the meaning of + is obviously bootloader-dependent. + + auto + The kernel was booted without explicit user intervention. + +If these options are added by the boot loader, it is highly +recommended that they are located *first*, before the user-specified +or configuration-specified command line. Otherwise, "init=/bin/sh" +gets confused by the "auto" option. + + +**** RUNNING THE KERNEL + +The kernel is started by jumping to the kernel entry point, which is +located at *segment* offset 0x20 from the start of the real mode +kernel. This means that if you loaded your real-mode kernel code at +0x90000, the kernel entry point is 9020:0000. + +At entry, ds = es = ss should point to the start of the real-mode +kernel code (0x9000 if the code is loaded at 0x90000), sp should be +set up properly, normally pointing to the top of the heap, and +interrupts should be disabled. Furthermore, to guard against bugs in +the kernel, it is recommended that the boot loader sets fs = gs = ds = +es = ss. + +In our example from above, we would do: + + /* Note: in the case of the "old" kernel protocol, base_ptr must + be == 0x90000 at this point; see the previous sample code */ + + seg = base_ptr >> 4; + + cli(); /* Enter with interrupts disabled! */ + + /* Set up the real-mode kernel stack */ + _SS = seg; + _SP = heap_end; + + _DS = _ES = _FS = _GS = seg; + jmp_far(seg+0x20, 0); /* Run the kernel */ + +If your boot sector accesses a floppy drive, it is recommended to +switch off the floppy motor before running the kernel, since the +kernel boot leaves interrupts off and thus the motor will not be +switched off, especially if the loaded kernel has the floppy driver as +a demand-loaded module! + + +**** ADVANCED BOOT LOADER HOOKS + +If the boot loader runs in a particularly hostile environment (such as +LOADLIN, which runs under DOS) it may be impossible to follow the +standard memory location requirements. Such a boot loader may use the +following hooks that, if set, are invoked by the kernel at the +appropriate time. The use of these hooks should probably be +considered an absolutely last resort! + +IMPORTANT: All the hooks are required to preserve %esp, %ebp, %esi and +%edi across invocation. + + realmode_swtch: + A 16-bit real mode far subroutine invoked immediately before + entering protected mode. The default routine disables NMI, so + your routine should probably do so, too. + + code32_start: + A 32-bit flat-mode routine *jumped* to immediately after the + transition to protected mode, but before the kernel is + uncompressed. No segments, except CS, are guaranteed to be + set up (current kernels do, but older ones do not); you should + set them up to BOOT_DS (0x18) yourself. + + After completing your hook, you should jump to the address + that was in this field before your boot loader overwrote it + (relocated, if appropriate.) + + +**** 32-bit BOOT PROTOCOL + +For machine with some new BIOS other than legacy BIOS, such as EFI, +LinuxBIOS, etc, and kexec, the 16-bit real mode setup code in kernel +based on legacy BIOS can not be used, so a 32-bit boot protocol needs +to be defined. + +In 32-bit boot protocol, the first step in loading a Linux kernel +should be to setup the boot parameters (struct boot_params, +traditionally known as "zero page"). The memory for struct boot_params +should be allocated and initialized to all zero. Then the setup header +from offset 0x01f1 of kernel image on should be loaded into struct +boot_params and examined. The end of setup header can be calculated as +follow: + + 0x0202 + byte value at offset 0x0201 + +In addition to read/modify/write the setup header of the struct +boot_params as that of 16-bit boot protocol, the boot loader should +also fill the additional fields of the struct boot_params as that +described in zero-page.txt. + +After setupping the struct boot_params, the boot loader can load the +32/64-bit kernel in the same way as that of 16-bit boot protocol. + +In 32-bit boot protocol, the kernel is started by jumping to the +32-bit kernel entry point, which is the start address of loaded +32/64-bit kernel. + +At entry, the CPU must be in 32-bit protected mode with paging +disabled; a GDT must be loaded with the descriptors for selectors +__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G flat +segment; __BOOS_CS must have execute/read permission, and __BOOT_DS +must have read/write permission; CS must be __BOOT_CS and DS, ES, SS +must be __BOOT_DS; interrupt must be disabled; %esi must hold the base +address of the struct boot_params; %ebp, %edi and %ebx must be zero. diff --git a/Documentation/x86/i386/usb-legacy-support.txt b/Documentation/x86/i386/usb-legacy-support.txt new file mode 100644 index 000000000000..1894cdfc69d9 --- /dev/null +++ b/Documentation/x86/i386/usb-legacy-support.txt @@ -0,0 +1,44 @@ +USB Legacy support +~~~~~~~~~~~~~~~~~~ + +Vojtech Pavlik , January 2004 + + +Also known as "USB Keyboard" or "USB Mouse support" in the BIOS Setup is a +feature that allows one to use the USB mouse and keyboard as if they were +their classic PS/2 counterparts. This means one can use an USB keyboard to +type in LILO for example. + +It has several drawbacks, though: + +1) On some machines, the emulated PS/2 mouse takes over even when no USB + mouse is present and a real PS/2 mouse is present. In that case the extra + features (wheel, extra buttons, touchpad mode) of the real PS/2 mouse may + not be available. + +2) If CONFIG_HIGHMEM64G is enabled, the PS/2 mouse emulation can cause + system crashes, because the SMM BIOS is not expecting to be in PAE mode. + The Intel E7505 is a typical machine where this happens. + +3) If AMD64 64-bit mode is enabled, again system crashes often happen, + because the SMM BIOS isn't expecting the CPU to be in 64-bit mode. The + BIOS manufacturers only test with Windows, and Windows doesn't do 64-bit + yet. + +Solutions: + +Problem 1) can be solved by loading the USB drivers prior to loading the +PS/2 mouse driver. Since the PS/2 mouse driver is in 2.6 compiled into +the kernel unconditionally, this means the USB drivers need to be +compiled-in, too. + +Problem 2) can currently only be solved by either disabling HIGHMEM64G +in the kernel config or USB Legacy support in the BIOS. A BIOS update +could help, but so far no such update exists. + +Problem 3) is usually fixed by a BIOS update. Check the board +manufacturers web site. If an update is not available, disable USB +Legacy support in the BIOS. If this alone doesn't help, try also adding +idle=poll on the kernel command line. The BIOS may be entering the SMM +on the HLT instruction as well. + diff --git a/Documentation/x86/i386/zero-page.txt b/Documentation/x86/i386/zero-page.txt new file mode 100644 index 000000000000..169ad423a3d1 --- /dev/null +++ b/Documentation/x86/i386/zero-page.txt @@ -0,0 +1,31 @@ +The additional fields in struct boot_params as a part of 32-bit boot +protocol of kernel. These should be filled by bootloader or 16-bit +real-mode setup code of the kernel. References/settings to it mainly +are in: + + include/asm-x86/bootparam.h + + +Offset Proto Name Meaning +/Size + +000/040 ALL screen_info Text mode or frame buffer information + (struct screen_info) +040/014 ALL apm_bios_info APM BIOS information (struct apm_bios_info) +060/010 ALL ist_info Intel SpeedStep (IST) BIOS support information + (struct ist_info) +080/010 ALL hd0_info hd0 disk parameter, OBSOLETE!! +090/010 ALL hd1_info hd1 disk parameter, OBSOLETE!! +0A0/010 ALL sys_desc_table System description table (struct sys_desc_table) +140/080 ALL edid_info Video mode setup (struct edid_info) +1C0/020 ALL efi_info EFI 32 information (struct efi_info) +1E0/004 ALL alk_mem_k Alternative mem check, in KB +1E4/004 ALL scratch Scratch field for the kernel setup code +1E8/001 ALL e820_entries Number of entries in e820_map (below) +1E9/001 ALL eddbuf_entries Number of entries in eddbuf (below) +1EA/001 ALL edd_mbr_sig_buf_entries Number of entries in edd_mbr_sig_buffer + (below) +290/040 ALL edd_mbr_sig_buffer EDD MBR signatures +2D0/A00 ALL e820_map E820 memory map table + (array of struct e820entry) +D00/1EC ALL eddbuf EDD data (array of struct edd_info) diff --git a/Documentation/x86/x86_64/00-INDEX b/Documentation/x86/x86_64/00-INDEX new file mode 100644 index 000000000000..92fc20ab5f0e --- /dev/null +++ b/Documentation/x86/x86_64/00-INDEX @@ -0,0 +1,16 @@ +00-INDEX + - This file +boot-options.txt + - AMD64-specific boot options. +cpu-hotplug-spec + - Firmware support for CPU hotplug under Linux/x86-64 +fake-numa-for-cpusets + - Using numa=fake and CPUSets for Resource Management +kernel-stacks + - Context-specific per-processor interrupt stacks. +machinecheck + - Configurable sysfs parameters for the x86-64 machine check code. +mm.txt + - Memory layout of x86-64 (4 level page tables, 46 bits physical). +uefi.txt + - Booting Linux via Unified Extensible Firmware Interface. diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt new file mode 100644 index 000000000000..b0c7b6c4abda --- /dev/null +++ b/Documentation/x86/x86_64/boot-options.txt @@ -0,0 +1,314 @@ +AMD64 specific boot options + +There are many others (usually documented in driver documentation), but +only the AMD64 specific ones are listed here. + +Machine check + + mce=off disable machine check + mce=bootlog Enable logging of machine checks left over from booting. + Disabled by default on AMD because some BIOS leave bogus ones. + If your BIOS doesn't do that it's a good idea to enable though + to make sure you log even machine check events that result + in a reboot. On Intel systems it is enabled by default. + mce=nobootlog + Disable boot machine check logging. + mce=tolerancelevel (number) + 0: always panic on uncorrected errors, log corrected errors + 1: panic or SIGBUS on uncorrected errors, log corrected errors + 2: SIGBUS or log uncorrected errors, log corrected errors + 3: never panic or SIGBUS, log all errors (for testing only) + Default is 1 + Can be also set using sysfs which is preferable. + + nomce (for compatibility with i386): same as mce=off + + Everything else is in sysfs now. + +APICs + + apic Use IO-APIC. Default + + noapic Don't use the IO-APIC. + + disableapic Don't use the local APIC + + nolapic Don't use the local APIC (alias for i386 compatibility) + + pirq=... See Documentation/i386/IO-APIC.txt + + noapictimer Don't set up the APIC timer + + no_timer_check Don't check the IO-APIC timer. This can work around + problems with incorrect timer initialization on some boards. + + apicmaintimer Run time keeping from the local APIC timer instead + of using the PIT/HPET interrupt for this. This is useful + when the PIT/HPET interrupts are unreliable. + + noapicmaintimer Don't do time keeping using the APIC timer. + Useful when this option was auto selected, but doesn't work. + + apicpmtimer + Do APIC timer calibration using the pmtimer. Implies + apicmaintimer. Useful when your PIT timer is totally + broken. + + disable_8254_timer / enable_8254_timer + Enable interrupt 0 timer routing over the 8254 in addition to over + the IO-APIC. The kernel tries to set a sensible default. + +Early Console + + syntax: earlyprintk=vga + earlyprintk=serial[,ttySn[,baudrate]] + + The early console is useful when the kernel crashes before the + normal console is initialized. It is not enabled by + default because it has some cosmetic problems. + Append ,keep to not disable it when the real console takes over. + Only vga or serial at a time, not both. + Currently only ttyS0 and ttyS1 are supported. + Interaction with the standard serial driver is not very good. + The VGA output is eventually overwritten by the real console. + +Timing + + notsc + Don't use the CPU time stamp counter to read the wall time. + This can be used to work around timing problems on multiprocessor systems + with not properly synchronized CPUs. + + report_lost_ticks + Report when timer interrupts are lost because some code turned off + interrupts for too long. + + nmi_watchdog=NUMBER[,panic] + NUMBER can be: + 0 don't use an NMI watchdog + 1 use the IO-APIC timer for the NMI watchdog + 2 use the local APIC for the NMI watchdog using a performance counter. Note + This will use one performance counter and the local APIC's performance + vector. + When panic is specified panic when an NMI watchdog timeout occurs. + This is useful when you use a panic=... timeout and need the box + quickly up again. + + nohpet + Don't use the HPET timer. + +Idle loop + + idle=poll + Don't do power saving in the idle loop using HLT, but poll for rescheduling + event. This will make the CPUs eat a lot more power, but may be useful + to get slightly better performance in multiprocessor benchmarks. It also + makes some profiling using performance counters more accurate. + Please note that on systems with MONITOR/MWAIT support (like Intel EM64T + CPUs) this option has no performance advantage over the normal idle loop. + It may also interact badly with hyperthreading. + +Rebooting + + reboot=b[ios] | t[riple] | k[bd] | a[cpi] | e[fi] [, [w]arm | [c]old] + bios Use the CPU reboot vector for warm reset + warm Don't set the cold reboot flag + cold Set the cold reboot flag + triple Force a triple fault (init) + kbd Use the keyboard controller. cold reset (default) + acpi Use the ACPI RESET_REG in the FADT. If ACPI is not configured or the + ACPI reset does not work, the reboot path attempts the reset using + the keyboard controller. + efi Use efi reset_system runtime service. If EFI is not configured or the + EFI reset does not work, the reboot path attempts the reset using + the keyboard controller. + + Using warm reset will be much faster especially on big memory + systems because the BIOS will not go through the memory check. + Disadvantage is that not all hardware will be completely reinitialized + on reboot so there may be boot problems on some systems. + + reboot=force + + Don't stop other CPUs on reboot. This can make reboot more reliable + in some cases. + +Non Executable Mappings + + noexec=on|off + + on Enable(default) + off Disable + +SMP + + additional_cpus=NUM Allow NUM more CPUs for hotplug + (defaults are specified by the BIOS, see Documentation/x86_64/cpu-hotplug-spec) + +NUMA + + numa=off Only set up a single NUMA node spanning all memory. + + numa=noacpi Don't parse the SRAT table for NUMA setup + + numa=fake=CMDLINE + If a number, fakes CMDLINE nodes and ignores NUMA setup of the + actual machine. Otherwise, system memory is configured + depending on the sizes and coefficients listed. For example: + numa=fake=2*512,1024,4*256,*128 + gives two 512M nodes, a 1024M node, four 256M nodes, and the + rest split into 128M chunks. If the last character of CMDLINE + is a *, the remaining memory is divided up equally among its + coefficient: + numa=fake=2*512,2* + gives two 512M nodes and the rest split into two nodes. + Otherwise, the remaining system RAM is allocated to an + additional node. + + numa=hotadd=percent + Only allow hotadd memory to preallocate page structures upto + percent of already available memory. + numa=hotadd=0 will disable hotadd memory. + +ACPI + + acpi=off Don't enable ACPI + acpi=ht Use ACPI boot table parsing, but don't enable ACPI + interpreter + acpi=force Force ACPI on (currently not needed) + + acpi=strict Disable out of spec ACPI workarounds. + + acpi_sci={edge,level,high,low} Set up ACPI SCI interrupt. + + acpi=noirq Don't route interrupts + +PCI + + pci=off Don't use PCI + pci=conf1 Use conf1 access. + pci=conf2 Use conf2 access. + pci=rom Assign ROMs. + pci=assign-busses Assign busses + pci=irqmask=MASK Set PCI interrupt mask to MASK + pci=lastbus=NUMBER Scan upto NUMBER busses, no matter what the mptable says. + pci=noacpi Don't use ACPI to set up PCI interrupt routing. + +IOMMU (input/output memory management unit) + + Currently four x86-64 PCI-DMA mapping implementations exist: + + 1. : use no hardware/software IOMMU at all + (e.g. because you have < 3 GB memory). + Kernel boot message: "PCI-DMA: Disabling IOMMU" + + 2. : AMD GART based hardware IOMMU. + Kernel boot message: "PCI-DMA: using GART IOMMU" + + 3. : Software IOMMU implementation. Used + e.g. if there is no hardware IOMMU in the system and it is need because + you have >3GB memory or told the kernel to us it (iommu=soft)) + Kernel boot message: "PCI-DMA: Using software bounce buffering + for IO (SWIOTLB)" + + 4. : IBM Calgary hardware IOMMU. Used in IBM + pSeries and xSeries servers. This hardware IOMMU supports DMA address + mapping with memory protection, etc. + Kernel boot message: "PCI-DMA: Using Calgary IOMMU" + + iommu=[][,noagp][,off][,force][,noforce][,leak[=] + [,memaper[=]][,merge][,forcesac][,fullflush][,nomerge] + [,noaperture][,calgary] + + General iommu options: + off Don't initialize and use any kind of IOMMU. + noforce Don't force hardware IOMMU usage when it is not needed. + (default). + force Force the use of the hardware IOMMU even when it is + not actually needed (e.g. because < 3 GB memory). + soft Use software bounce buffering (SWIOTLB) (default for + Intel machines). This can be used to prevent the usage + of an available hardware IOMMU. + + iommu options only relevant to the AMD GART hardware IOMMU: + Set the size of the remapping area in bytes. + allowed Overwrite iommu off workarounds for specific chipsets. + fullflush Flush IOMMU on each allocation (default). + nofullflush Don't use IOMMU fullflush. + leak Turn on simple iommu leak tracing (only when + CONFIG_IOMMU_LEAK is on). Default number of leak pages + is 20. + memaper[=] Allocate an own aperture over RAM with size 32MB<4GB. + DAC is used with 32-bit PCI to push a 64-bit address in + two cycles. When off all DMA over >4GB is forced through + an IOMMU or software bounce buffering. + nodac Forbid DAC mode, i.e. DMA >4GB. + panic Always panic when IOMMU overflows. + calgary Use the Calgary IOMMU if it is available + + iommu options only relevant to the software bounce buffering (SWIOTLB) IOMMU + implementation: + swiotlb=[,force] + Prereserve that many 128K pages for the software IO + bounce buffering. + force Force all IO through the software TLB. + + Settings for the IBM Calgary hardware IOMMU currently found in IBM + pSeries and xSeries machines: + + calgary=[64k,128k,256k,512k,1M,2M,4M,8M] + calgary=[translate_empty_slots] + calgary=[disable=] + panic Always panic when IOMMU overflows + + 64k,...,8M - Set the size of each PCI slot's translation table + when using the Calgary IOMMU. This is the size of the translation + table itself in main memory. The smallest table, 64k, covers an IO + space of 32MB; the largest, 8MB table, can cover an IO space of + 4GB. Normally the kernel will make the right choice by itself. + + translate_empty_slots - Enable translation even on slots that have + no devices attached to them, in case a device will be hotplugged + in the future. + + disable= - Disable translation on a given PHB. For + example, the built-in graphics adapter resides on the first bridge + (PCI bus number 0); if translation (isolation) is enabled on this + bridge, X servers that access the hardware directly from user + space might stop working. Use this option if you have devices that + are accessed from userspace directly on some PCI host bridge. + +Debugging + + oops=panic Always panic on oopses. Default is to just kill the process, + but there is a small probability of deadlocking the machine. + This will also cause panics on machine check exceptions. + Useful together with panic=30 to trigger a reboot. + + kstack=N Print N words from the kernel stack in oops dumps. + + pagefaulttrace Dump all page faults. Only useful for extreme debugging + and will create a lot of output. + + call_trace=[old|both|newfallback|new] + old: use old inexact backtracer + new: use new exact dwarf2 unwinder + both: print entries from both + newfallback: use new unwinder but fall back to old if it gets + stuck (default) + +Miscellaneous + + nogbpages + Do not use GB pages for kernel direct mappings. + gbpages + Use GB pages for kernel direct mappings. diff --git a/Documentation/x86/x86_64/cpu-hotplug-spec b/Documentation/x86/x86_64/cpu-hotplug-spec new file mode 100644 index 000000000000..3c23e0587db3 --- /dev/null +++ b/Documentation/x86/x86_64/cpu-hotplug-spec @@ -0,0 +1,21 @@ +Firmware support for CPU hotplug under Linux/x86-64 +--------------------------------------------------- + +Linux/x86-64 supports CPU hotplug now. For various reasons Linux wants to +know in advance of boot time the maximum number of CPUs that could be plugged +into the system. ACPI 3.0 currently has no official way to supply +this information from the firmware to the operating system. + +In ACPI each CPU needs an LAPIC object in the MADT table (5.2.11.5 in the +ACPI 3.0 specification). ACPI already has the concept of disabled LAPIC +objects by setting the Enabled bit in the LAPIC object to zero. + +For CPU hotplug Linux/x86-64 expects now that any possible future hotpluggable +CPU is already available in the MADT. If the CPU is not available yet +it should have its LAPIC Enabled bit set to 0. Linux will use the number +of disabled LAPICs to compute the maximum number of future CPUs. + +In the worst case the user can overwrite this choice using a command line +option (additional_cpus=...), but it is recommended to supply the correct +number (or a reasonable approximation of it, with erring towards more not less) +in the MADT to avoid manual configuration. diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets b/Documentation/x86/x86_64/fake-numa-for-cpusets new file mode 100644 index 000000000000..d1a985c5b00a --- /dev/null +++ b/Documentation/x86/x86_64/fake-numa-for-cpusets @@ -0,0 +1,66 @@ +Using numa=fake and CPUSets for Resource Management +Written by David Rientjes + +This document describes how the numa=fake x86_64 command-line option can be used +in conjunction with cpusets for coarse memory management. Using this feature, +you can create fake NUMA nodes that represent contiguous chunks of memory and +assign them to cpusets and their attached tasks. This is a way of limiting the +amount of system memory that are available to a certain class of tasks. + +For more information on the features of cpusets, see Documentation/cpusets.txt. +There are a number of different configurations you can use for your needs. For +more information on the numa=fake command line option and its various ways of +configuring fake nodes, see Documentation/x86_64/boot-options.txt. + +For the purposes of this introduction, we'll assume a very primitive NUMA +emulation setup of "numa=fake=4*512,". This will split our system memory into +four equal chunks of 512M each that we can now use to assign to cpusets. As +you become more familiar with using this combination for resource control, +you'll determine a better setup to minimize the number of nodes you have to deal +with. + +A machine may be split as follows with "numa=fake=4*512," as reported by dmesg: + + Faking node 0 at 0000000000000000-0000000020000000 (512MB) + Faking node 1 at 0000000020000000-0000000040000000 (512MB) + Faking node 2 at 0000000040000000-0000000060000000 (512MB) + Faking node 3 at 0000000060000000-0000000080000000 (512MB) + ... + On node 0 totalpages: 130975 + On node 1 totalpages: 131072 + On node 2 totalpages: 131072 + On node 3 totalpages: 131072 + +Now following the instructions for mounting the cpusets filesystem from +Documentation/cpusets.txt, you can assign fake nodes (i.e. contiguous memory +address spaces) to individual cpusets: + + [root@xroads /]# mkdir exampleset + [root@xroads /]# mount -t cpuset none exampleset + [root@xroads /]# mkdir exampleset/ddset + [root@xroads /]# cd exampleset/ddset + [root@xroads /exampleset/ddset]# echo 0-1 > cpus + [root@xroads /exampleset/ddset]# echo 0-1 > mems + +Now this cpuset, 'ddset', will only allowed access to fake nodes 0 and 1 for +memory allocations (1G). + +You can now assign tasks to these cpusets to limit the memory resources +available to them according to the fake nodes assigned as mems: + + [root@xroads /exampleset/ddset]# echo $$ > tasks + [root@xroads /exampleset/ddset]# dd if=/dev/zero of=tmp bs=1024 count=1G + [1] 13425 + +Notice the difference between the system memory usage as reported by +/proc/meminfo between the restricted cpuset case above and the unrestricted +case (i.e. running the same 'dd' command without assigning it to a fake NUMA +cpuset): + Unrestricted Restricted + MemTotal: 3091900 kB 3091900 kB + MemFree: 42113 kB 1513236 kB + +This allows for coarse memory management for the tasks you assign to particular +cpusets. Since cpusets can form a hierarchy, you can create some pretty +interesting combinations of use-cases for various classes of tasks for your +memory management needs. diff --git a/Documentation/x86/x86_64/kernel-stacks b/Documentation/x86/x86_64/kernel-stacks new file mode 100644 index 000000000000..5ad65d51fb95 --- /dev/null +++ b/Documentation/x86/x86_64/kernel-stacks @@ -0,0 +1,99 @@ +Most of the text from Keith Owens, hacked by AK + +x86_64 page size (PAGE_SIZE) is 4K. + +Like all other architectures, x86_64 has a kernel stack for every +active thread. These thread stacks are THREAD_SIZE (2*PAGE_SIZE) big. +These stacks contain useful data as long as a thread is alive or a +zombie. While the thread is in user space the kernel stack is empty +except for the thread_info structure at the bottom. + +In addition to the per thread stacks, there are specialized stacks +associated with each CPU. These stacks are only used while the kernel +is in control on that CPU; when a CPU returns to user space the +specialized stacks contain no useful data. The main CPU stacks are: + +* Interrupt stack. IRQSTACKSIZE + + Used for external hardware interrupts. If this is the first external + hardware interrupt (i.e. not a nested hardware interrupt) then the + kernel switches from the current task to the interrupt stack. Like + the split thread and interrupt stacks on i386 (with CONFIG_4KSTACKS), + this gives more room for kernel interrupt processing without having + to increase the size of every per thread stack. + + The interrupt stack is also used when processing a softirq. + +Switching to the kernel interrupt stack is done by software based on a +per CPU interrupt nest counter. This is needed because x86-64 "IST" +hardware stacks cannot nest without races. + +x86_64 also has a feature which is not available on i386, the ability +to automatically switch to a new stack for designated events such as +double fault or NMI, which makes it easier to handle these unusual +events on x86_64. This feature is called the Interrupt Stack Table +(IST). There can be up to 7 IST entries per CPU. The IST code is an +index into the Task State Segment (TSS). The IST entries in the TSS +point to dedicated stacks; each stack can be a different size. + +An IST is selected by a non-zero value in the IST field of an +interrupt-gate descriptor. When an interrupt occurs and the hardware +loads such a descriptor, the hardware automatically sets the new stack +pointer based on the IST value, then invokes the interrupt handler. If +software wants to allow nested IST interrupts then the handler must +adjust the IST values on entry to and exit from the interrupt handler. +(This is occasionally done, e.g. for debug exceptions.) + +Events with different IST codes (i.e. with different stacks) can be +nested. For example, a debug interrupt can safely be interrupted by an +NMI. arch/x86_64/kernel/entry.S::paranoidentry adjusts the stack +pointers on entry to and exit from all IST events, in theory allowing +IST events with the same code to be nested. However in most cases, the +stack size allocated to an IST assumes no nesting for the same code. +If that assumption is ever broken then the stacks will become corrupt. + +The currently assigned IST stacks are :- + +* STACKFAULT_STACK. EXCEPTION_STKSZ (PAGE_SIZE). + + Used for interrupt 12 - Stack Fault Exception (#SS). + + This allows the CPU to recover from invalid stack segments. Rarely + happens. + +* DOUBLEFAULT_STACK. EXCEPTION_STKSZ (PAGE_SIZE). + + Used for interrupt 8 - Double Fault Exception (#DF). + + Invoked when handling one exception causes another exception. Happens + when the kernel is very confused (e.g. kernel stack pointer corrupt). + Using a separate stack allows the kernel to recover from it well enough + in many cases to still output an oops. + +* NMI_STACK. EXCEPTION_STKSZ (PAGE_SIZE). + + Used for non-maskable interrupts (NMI). + + NMI can be delivered at any time, including when the kernel is in the + middle of switching stacks. Using IST for NMI events avoids making + assumptions about the previous state of the kernel stack. + +* DEBUG_STACK. DEBUG_STKSZ + + Used for hardware debug interrupts (interrupt 1) and for software + debug interrupts (INT3). + + When debugging a kernel, debug interrupts (both hardware and + software) can occur at any time. Using IST for these interrupts + avoids making assumptions about the previous state of the kernel + stack. + +* MCE_STACK. EXCEPTION_STKSZ (PAGE_SIZE). + + Used for interrupt 18 - Machine Check Exception (#MC). + + MCE can be delivered at any time, including when the kernel is in the + middle of switching stacks. Using IST for MCE events avoids making + assumptions about the previous state of the kernel stack. + +For more details see the Intel IA32 or AMD AMD64 architecture manuals. diff --git a/Documentation/x86/x86_64/machinecheck b/Documentation/x86/x86_64/machinecheck new file mode 100644 index 000000000000..a05e58e7b159 --- /dev/null +++ b/Documentation/x86/x86_64/machinecheck @@ -0,0 +1,77 @@ + +Configurable sysfs parameters for the x86-64 machine check code. + +Machine checks report internal hardware error conditions detected +by the CPU. Uncorrected errors typically cause a machine check +(often with panic), corrected ones cause a machine check log entry. + +Machine checks are organized in banks (normally associated with +a hardware subsystem) and subevents in a bank. The exact meaning +of the banks and subevent is CPU specific. + +mcelog knows how to decode them. + +When you see the "Machine check errors logged" message in the system +log then mcelog should run to collect and decode machine check entries +from /dev/mcelog. Normally mcelog should be run regularly from a cronjob. + +Each CPU has a directory in /sys/devices/system/machinecheck/machinecheckN +(N = CPU number) + +The directory contains some configurable entries: + +Entries: + +bankNctl +(N bank number) + 64bit Hex bitmask enabling/disabling specific subevents for bank N + When a bit in the bitmask is zero then the respective + subevent will not be reported. + By default all events are enabled. + Note that BIOS maintain another mask to disable specific events + per bank. This is not visible here + +The following entries appear for each CPU, but they are truly shared +between all CPUs. + +check_interval + How often to poll for corrected machine check errors, in seconds + (Note output is hexademical). Default 5 minutes. When the poller + finds MCEs it triggers an exponential speedup (poll more often) on + the polling interval. When the poller stops finding MCEs, it + triggers an exponential backoff (poll less often) on the polling + interval. The check_interval variable is both the initial and + maximum polling interval. + +tolerant + Tolerance level. When a machine check exception occurs for a non + corrected machine check the kernel can take different actions. + Since machine check exceptions can happen any time it is sometimes + risky for the kernel to kill a process because it defies + normal kernel locking rules. The tolerance level configures + how hard the kernel tries to recover even at some risk of + deadlock. Higher tolerant values trade potentially better uptime + with the risk of a crash or even corruption (for tolerant >= 3). + + 0: always panic on uncorrected errors, log corrected errors + 1: panic or SIGBUS on uncorrected errors, log corrected errors + 2: SIGBUS or log uncorrected errors, log corrected errors + 3: never panic or SIGBUS, log all errors (for testing only) + + Default: 1 + + Note this only makes a difference if the CPU allows recovery + from a machine check exception. Current x86 CPUs generally do not. + +trigger + Program to run when a machine check event is detected. + This is an alternative to running mcelog regularly from cron + and allows to detect events faster. + +TBD document entries for AMD threshold interrupt configuration + +For more details about the x86 machine check architecture +see the Intel and AMD architecture manuals from their developer websites. + +For more details about the architecture see +see http://one.firstfloor.org/~andi/mce.pdf diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt new file mode 100644 index 000000000000..b89b6d2bebfa --- /dev/null +++ b/Documentation/x86/x86_64/mm.txt @@ -0,0 +1,29 @@ + + + +Virtual memory map with 4 level page tables: + +0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm +hole caused by [48:63] sign extension +ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole +ffff810000000000 - ffffc0ffffffffff (=46 bits) direct mapping of all phys. memory +ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole +ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space +ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB) +... unused hole ... +ffffffff80000000 - ffffffff82800000 (=40 MB) kernel text mapping, from phys 0 +... unused hole ... +ffffffff88000000 - fffffffffff00000 (=1919 MB) module mapping space + +The direct mapping covers all memory in the system up to the highest +memory address (this means in some cases it can also include PCI memory +holes). + +vmalloc space is lazily synchronized into the different PML4 pages of +the processes using the page fault handler, with init_level4_pgt as +reference. + +Current X86-64 implementations only support 40 bits of address space, +but we support up to 46 bits. This expands into MBZ space in the page tables. + +-Andi Kleen, Jul 2004 diff --git a/Documentation/x86/x86_64/uefi.txt b/Documentation/x86/x86_64/uefi.txt new file mode 100644 index 000000000000..7d77120a5184 --- /dev/null +++ b/Documentation/x86/x86_64/uefi.txt @@ -0,0 +1,38 @@ +General note on [U]EFI x86_64 support +------------------------------------- + +The nomenclature EFI and UEFI are used interchangeably in this document. + +Although the tools below are _not_ needed for building the kernel, +the needed bootloader support and associated tools for x86_64 platforms +with EFI firmware and specifications are listed below. + +1. UEFI specification: http://www.uefi.org + +2. Booting Linux kernel on UEFI x86_64 platform requires bootloader + support. Elilo with x86_64 support can be used. + +3. x86_64 platform with EFI/UEFI firmware. + +Mechanics: +--------- +- Build the kernel with the following configuration. + CONFIG_FB_EFI=y + CONFIG_FRAMEBUFFER_CONSOLE=y + If EFI runtime services are expected, the following configuration should + be selected. + CONFIG_EFI=y + CONFIG_EFI_VARS=y or m # optional +- Create a VFAT partition on the disk +- Copy the following to the VFAT partition: + elilo bootloader with x86_64 support, elilo configuration file, + kernel image built in first step and corresponding + initrd. Instructions on building elilo and its dependencies + can be found in the elilo sourceforge project. +- Boot to EFI shell and invoke elilo choosing the kernel image built + in first step. +- If some or all EFI runtime services don't work, you can try following + kernel command line parameters to turn off some or all EFI runtime + services. + noefi turn off all EFI runtime services + reboot_type=k turn off EFI reboot runtime service diff --git a/Documentation/x86_64/00-INDEX b/Documentation/x86_64/00-INDEX deleted file mode 100644 index 92fc20ab5f0e..000000000000 --- a/Documentation/x86_64/00-INDEX +++ /dev/null @@ -1,16 +0,0 @@ -00-INDEX - - This file -boot-options.txt - - AMD64-specific boot options. -cpu-hotplug-spec - - Firmware support for CPU hotplug under Linux/x86-64 -fake-numa-for-cpusets - - Using numa=fake and CPUSets for Resource Management -kernel-stacks - - Context-specific per-processor interrupt stacks. -machinecheck - - Configurable sysfs parameters for the x86-64 machine check code. -mm.txt - - Memory layout of x86-64 (4 level page tables, 46 bits physical). -uefi.txt - - Booting Linux via Unified Extensible Firmware Interface. diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt deleted file mode 100644 index b0c7b6c4abda..000000000000 --- a/Documentation/x86_64/boot-options.txt +++ /dev/null @@ -1,314 +0,0 @@ -AMD64 specific boot options - -There are many others (usually documented in driver documentation), but -only the AMD64 specific ones are listed here. - -Machine check - - mce=off disable machine check - mce=bootlog Enable logging of machine checks left over from booting. - Disabled by default on AMD because some BIOS leave bogus ones. - If your BIOS doesn't do that it's a good idea to enable though - to make sure you log even machine check events that result - in a reboot. On Intel systems it is enabled by default. - mce=nobootlog - Disable boot machine check logging. - mce=tolerancelevel (number) - 0: always panic on uncorrected errors, log corrected errors - 1: panic or SIGBUS on uncorrected errors, log corrected errors - 2: SIGBUS or log uncorrected errors, log corrected errors - 3: never panic or SIGBUS, log all errors (for testing only) - Default is 1 - Can be also set using sysfs which is preferable. - - nomce (for compatibility with i386): same as mce=off - - Everything else is in sysfs now. - -APICs - - apic Use IO-APIC. Default - - noapic Don't use the IO-APIC. - - disableapic Don't use the local APIC - - nolapic Don't use the local APIC (alias for i386 compatibility) - - pirq=... See Documentation/i386/IO-APIC.txt - - noapictimer Don't set up the APIC timer - - no_timer_check Don't check the IO-APIC timer. This can work around - problems with incorrect timer initialization on some boards. - - apicmaintimer Run time keeping from the local APIC timer instead - of using the PIT/HPET interrupt for this. This is useful - when the PIT/HPET interrupts are unreliable. - - noapicmaintimer Don't do time keeping using the APIC timer. - Useful when this option was auto selected, but doesn't work. - - apicpmtimer - Do APIC timer calibration using the pmtimer. Implies - apicmaintimer. Useful when your PIT timer is totally - broken. - - disable_8254_timer / enable_8254_timer - Enable interrupt 0 timer routing over the 8254 in addition to over - the IO-APIC. The kernel tries to set a sensible default. - -Early Console - - syntax: earlyprintk=vga - earlyprintk=serial[,ttySn[,baudrate]] - - The early console is useful when the kernel crashes before the - normal console is initialized. It is not enabled by - default because it has some cosmetic problems. - Append ,keep to not disable it when the real console takes over. - Only vga or serial at a time, not both. - Currently only ttyS0 and ttyS1 are supported. - Interaction with the standard serial driver is not very good. - The VGA output is eventually overwritten by the real console. - -Timing - - notsc - Don't use the CPU time stamp counter to read the wall time. - This can be used to work around timing problems on multiprocessor systems - with not properly synchronized CPUs. - - report_lost_ticks - Report when timer interrupts are lost because some code turned off - interrupts for too long. - - nmi_watchdog=NUMBER[,panic] - NUMBER can be: - 0 don't use an NMI watchdog - 1 use the IO-APIC timer for the NMI watchdog - 2 use the local APIC for the NMI watchdog using a performance counter. Note - This will use one performance counter and the local APIC's performance - vector. - When panic is specified panic when an NMI watchdog timeout occurs. - This is useful when you use a panic=... timeout and need the box - quickly up again. - - nohpet - Don't use the HPET timer. - -Idle loop - - idle=poll - Don't do power saving in the idle loop using HLT, but poll for rescheduling - event. This will make the CPUs eat a lot more power, but may be useful - to get slightly better performance in multiprocessor benchmarks. It also - makes some profiling using performance counters more accurate. - Please note that on systems with MONITOR/MWAIT support (like Intel EM64T - CPUs) this option has no performance advantage over the normal idle loop. - It may also interact badly with hyperthreading. - -Rebooting - - reboot=b[ios] | t[riple] | k[bd] | a[cpi] | e[fi] [, [w]arm | [c]old] - bios Use the CPU reboot vector for warm reset - warm Don't set the cold reboot flag - cold Set the cold reboot flag - triple Force a triple fault (init) - kbd Use the keyboard controller. cold reset (default) - acpi Use the ACPI RESET_REG in the FADT. If ACPI is not configured or the - ACPI reset does not work, the reboot path attempts the reset using - the keyboard controller. - efi Use efi reset_system runtime service. If EFI is not configured or the - EFI reset does not work, the reboot path attempts the reset using - the keyboard controller. - - Using warm reset will be much faster especially on big memory - systems because the BIOS will not go through the memory check. - Disadvantage is that not all hardware will be completely reinitialized - on reboot so there may be boot problems on some systems. - - reboot=force - - Don't stop other CPUs on reboot. This can make reboot more reliable - in some cases. - -Non Executable Mappings - - noexec=on|off - - on Enable(default) - off Disable - -SMP - - additional_cpus=NUM Allow NUM more CPUs for hotplug - (defaults are specified by the BIOS, see Documentation/x86_64/cpu-hotplug-spec) - -NUMA - - numa=off Only set up a single NUMA node spanning all memory. - - numa=noacpi Don't parse the SRAT table for NUMA setup - - numa=fake=CMDLINE - If a number, fakes CMDLINE nodes and ignores NUMA setup of the - actual machine. Otherwise, system memory is configured - depending on the sizes and coefficients listed. For example: - numa=fake=2*512,1024,4*256,*128 - gives two 512M nodes, a 1024M node, four 256M nodes, and the - rest split into 128M chunks. If the last character of CMDLINE - is a *, the remaining memory is divided up equally among its - coefficient: - numa=fake=2*512,2* - gives two 512M nodes and the rest split into two nodes. - Otherwise, the remaining system RAM is allocated to an - additional node. - - numa=hotadd=percent - Only allow hotadd memory to preallocate page structures upto - percent of already available memory. - numa=hotadd=0 will disable hotadd memory. - -ACPI - - acpi=off Don't enable ACPI - acpi=ht Use ACPI boot table parsing, but don't enable ACPI - interpreter - acpi=force Force ACPI on (currently not needed) - - acpi=strict Disable out of spec ACPI workarounds. - - acpi_sci={edge,level,high,low} Set up ACPI SCI interrupt. - - acpi=noirq Don't route interrupts - -PCI - - pci=off Don't use PCI - pci=conf1 Use conf1 access. - pci=conf2 Use conf2 access. - pci=rom Assign ROMs. - pci=assign-busses Assign busses - pci=irqmask=MASK Set PCI interrupt mask to MASK - pci=lastbus=NUMBER Scan upto NUMBER busses, no matter what the mptable says. - pci=noacpi Don't use ACPI to set up PCI interrupt routing. - -IOMMU (input/output memory management unit) - - Currently four x86-64 PCI-DMA mapping implementations exist: - - 1. : use no hardware/software IOMMU at all - (e.g. because you have < 3 GB memory). - Kernel boot message: "PCI-DMA: Disabling IOMMU" - - 2. : AMD GART based hardware IOMMU. - Kernel boot message: "PCI-DMA: using GART IOMMU" - - 3. : Software IOMMU implementation. Used - e.g. if there is no hardware IOMMU in the system and it is need because - you have >3GB memory or told the kernel to us it (iommu=soft)) - Kernel boot message: "PCI-DMA: Using software bounce buffering - for IO (SWIOTLB)" - - 4. : IBM Calgary hardware IOMMU. Used in IBM - pSeries and xSeries servers. This hardware IOMMU supports DMA address - mapping with memory protection, etc. - Kernel boot message: "PCI-DMA: Using Calgary IOMMU" - - iommu=[][,noagp][,off][,force][,noforce][,leak[=] - [,memaper[=]][,merge][,forcesac][,fullflush][,nomerge] - [,noaperture][,calgary] - - General iommu options: - off Don't initialize and use any kind of IOMMU. - noforce Don't force hardware IOMMU usage when it is not needed. - (default). - force Force the use of the hardware IOMMU even when it is - not actually needed (e.g. because < 3 GB memory). - soft Use software bounce buffering (SWIOTLB) (default for - Intel machines). This can be used to prevent the usage - of an available hardware IOMMU. - - iommu options only relevant to the AMD GART hardware IOMMU: - Set the size of the remapping area in bytes. - allowed Overwrite iommu off workarounds for specific chipsets. - fullflush Flush IOMMU on each allocation (default). - nofullflush Don't use IOMMU fullflush. - leak Turn on simple iommu leak tracing (only when - CONFIG_IOMMU_LEAK is on). Default number of leak pages - is 20. - memaper[=] Allocate an own aperture over RAM with size 32MB<4GB. - DAC is used with 32-bit PCI to push a 64-bit address in - two cycles. When off all DMA over >4GB is forced through - an IOMMU or software bounce buffering. - nodac Forbid DAC mode, i.e. DMA >4GB. - panic Always panic when IOMMU overflows. - calgary Use the Calgary IOMMU if it is available - - iommu options only relevant to the software bounce buffering (SWIOTLB) IOMMU - implementation: - swiotlb=[,force] - Prereserve that many 128K pages for the software IO - bounce buffering. - force Force all IO through the software TLB. - - Settings for the IBM Calgary hardware IOMMU currently found in IBM - pSeries and xSeries machines: - - calgary=[64k,128k,256k,512k,1M,2M,4M,8M] - calgary=[translate_empty_slots] - calgary=[disable=] - panic Always panic when IOMMU overflows - - 64k,...,8M - Set the size of each PCI slot's translation table - when using the Calgary IOMMU. This is the size of the translation - table itself in main memory. The smallest table, 64k, covers an IO - space of 32MB; the largest, 8MB table, can cover an IO space of - 4GB. Normally the kernel will make the right choice by itself. - - translate_empty_slots - Enable translation even on slots that have - no devices attached to them, in case a device will be hotplugged - in the future. - - disable= - Disable translation on a given PHB. For - example, the built-in graphics adapter resides on the first bridge - (PCI bus number 0); if translation (isolation) is enabled on this - bridge, X servers that access the hardware directly from user - space might stop working. Use this option if you have devices that - are accessed from userspace directly on some PCI host bridge. - -Debugging - - oops=panic Always panic on oopses. Default is to just kill the process, - but there is a small probability of deadlocking the machine. - This will also cause panics on machine check exceptions. - Useful together with panic=30 to trigger a reboot. - - kstack=N Print N words from the kernel stack in oops dumps. - - pagefaulttrace Dump all page faults. Only useful for extreme debugging - and will create a lot of output. - - call_trace=[old|both|newfallback|new] - old: use old inexact backtracer - new: use new exact dwarf2 unwinder - both: print entries from both - newfallback: use new unwinder but fall back to old if it gets - stuck (default) - -Miscellaneous - - nogbpages - Do not use GB pages for kernel direct mappings. - gbpages - Use GB pages for kernel direct mappings. diff --git a/Documentation/x86_64/cpu-hotplug-spec b/Documentation/x86_64/cpu-hotplug-spec deleted file mode 100644 index 3c23e0587db3..000000000000 --- a/Documentation/x86_64/cpu-hotplug-spec +++ /dev/null @@ -1,21 +0,0 @@ -Firmware support for CPU hotplug under Linux/x86-64 ---------------------------------------------------- - -Linux/x86-64 supports CPU hotplug now. For various reasons Linux wants to -know in advance of boot time the maximum number of CPUs that could be plugged -into the system. ACPI 3.0 currently has no official way to supply -this information from the firmware to the operating system. - -In ACPI each CPU needs an LAPIC object in the MADT table (5.2.11.5 in the -ACPI 3.0 specification). ACPI already has the concept of disabled LAPIC -objects by setting the Enabled bit in the LAPIC object to zero. - -For CPU hotplug Linux/x86-64 expects now that any possible future hotpluggable -CPU is already available in the MADT. If the CPU is not available yet -it should have its LAPIC Enabled bit set to 0. Linux will use the number -of disabled LAPICs to compute the maximum number of future CPUs. - -In the worst case the user can overwrite this choice using a command line -option (additional_cpus=...), but it is recommended to supply the correct -number (or a reasonable approximation of it, with erring towards more not less) -in the MADT to avoid manual configuration. diff --git a/Documentation/x86_64/fake-numa-for-cpusets b/Documentation/x86_64/fake-numa-for-cpusets deleted file mode 100644 index d1a985c5b00a..000000000000 --- a/Documentation/x86_64/fake-numa-for-cpusets +++ /dev/null @@ -1,66 +0,0 @@ -Using numa=fake and CPUSets for Resource Management -Written by David Rientjes - -This document describes how the numa=fake x86_64 command-line option can be used -in conjunction with cpusets for coarse memory management. Using this feature, -you can create fake NUMA nodes that represent contiguous chunks of memory and -assign them to cpusets and their attached tasks. This is a way of limiting the -amount of system memory that are available to a certain class of tasks. - -For more information on the features of cpusets, see Documentation/cpusets.txt. -There are a number of different configurations you can use for your needs. For -more information on the numa=fake command line option and its various ways of -configuring fake nodes, see Documentation/x86_64/boot-options.txt. - -For the purposes of this introduction, we'll assume a very primitive NUMA -emulation setup of "numa=fake=4*512,". This will split our system memory into -four equal chunks of 512M each that we can now use to assign to cpusets. As -you become more familiar with using this combination for resource control, -you'll determine a better setup to minimize the number of nodes you have to deal -with. - -A machine may be split as follows with "numa=fake=4*512," as reported by dmesg: - - Faking node 0 at 0000000000000000-0000000020000000 (512MB) - Faking node 1 at 0000000020000000-0000000040000000 (512MB) - Faking node 2 at 0000000040000000-0000000060000000 (512MB) - Faking node 3 at 0000000060000000-0000000080000000 (512MB) - ... - On node 0 totalpages: 130975 - On node 1 totalpages: 131072 - On node 2 totalpages: 131072 - On node 3 totalpages: 131072 - -Now following the instructions for mounting the cpusets filesystem from -Documentation/cpusets.txt, you can assign fake nodes (i.e. contiguous memory -address spaces) to individual cpusets: - - [root@xroads /]# mkdir exampleset - [root@xroads /]# mount -t cpuset none exampleset - [root@xroads /]# mkdir exampleset/ddset - [root@xroads /]# cd exampleset/ddset - [root@xroads /exampleset/ddset]# echo 0-1 > cpus - [root@xroads /exampleset/ddset]# echo 0-1 > mems - -Now this cpuset, 'ddset', will only allowed access to fake nodes 0 and 1 for -memory allocations (1G). - -You can now assign tasks to these cpusets to limit the memory resources -available to them according to the fake nodes assigned as mems: - - [root@xroads /exampleset/ddset]# echo $$ > tasks - [root@xroads /exampleset/ddset]# dd if=/dev/zero of=tmp bs=1024 count=1G - [1] 13425 - -Notice the difference between the system memory usage as reported by -/proc/meminfo between the restricted cpuset case above and the unrestricted -case (i.e. running the same 'dd' command without assigning it to a fake NUMA -cpuset): - Unrestricted Restricted - MemTotal: 3091900 kB 3091900 kB - MemFree: 42113 kB 1513236 kB - -This allows for coarse memory management for the tasks you assign to particular -cpusets. Since cpusets can form a hierarchy, you can create some pretty -interesting combinations of use-cases for various classes of tasks for your -memory management needs. diff --git a/Documentation/x86_64/kernel-stacks b/Documentation/x86_64/kernel-stacks deleted file mode 100644 index 5ad65d51fb95..000000000000 --- a/Documentation/x86_64/kernel-stacks +++ /dev/null @@ -1,99 +0,0 @@ -Most of the text from Keith Owens, hacked by AK - -x86_64 page size (PAGE_SIZE) is 4K. - -Like all other architectures, x86_64 has a kernel stack for every -active thread. These thread stacks are THREAD_SIZE (2*PAGE_SIZE) big. -These stacks contain useful data as long as a thread is alive or a -zombie. While the thread is in user space the kernel stack is empty -except for the thread_info structure at the bottom. - -In addition to the per thread stacks, there are specialized stacks -associated with each CPU. These stacks are only used while the kernel -is in control on that CPU; when a CPU returns to user space the -specialized stacks contain no useful data. The main CPU stacks are: - -* Interrupt stack. IRQSTACKSIZE - - Used for external hardware interrupts. If this is the first external - hardware interrupt (i.e. not a nested hardware interrupt) then the - kernel switches from the current task to the interrupt stack. Like - the split thread and interrupt stacks on i386 (with CONFIG_4KSTACKS), - this gives more room for kernel interrupt processing without having - to increase the size of every per thread stack. - - The interrupt stack is also used when processing a softirq. - -Switching to the kernel interrupt stack is done by software based on a -per CPU interrupt nest counter. This is needed because x86-64 "IST" -hardware stacks cannot nest without races. - -x86_64 also has a feature which is not available on i386, the ability -to automatically switch to a new stack for designated events such as -double fault or NMI, which makes it easier to handle these unusual -events on x86_64. This feature is called the Interrupt Stack Table -(IST). There can be up to 7 IST entries per CPU. The IST code is an -index into the Task State Segment (TSS). The IST entries in the TSS -point to dedicated stacks; each stack can be a different size. - -An IST is selected by a non-zero value in the IST field of an -interrupt-gate descriptor. When an interrupt occurs and the hardware -loads such a descriptor, the hardware automatically sets the new stack -pointer based on the IST value, then invokes the interrupt handler. If -software wants to allow nested IST interrupts then the handler must -adjust the IST values on entry to and exit from the interrupt handler. -(This is occasionally done, e.g. for debug exceptions.) - -Events with different IST codes (i.e. with different stacks) can be -nested. For example, a debug interrupt can safely be interrupted by an -NMI. arch/x86_64/kernel/entry.S::paranoidentry adjusts the stack -pointers on entry to and exit from all IST events, in theory allowing -IST events with the same code to be nested. However in most cases, the -stack size allocated to an IST assumes no nesting for the same code. -If that assumption is ever broken then the stacks will become corrupt. - -The currently assigned IST stacks are :- - -* STACKFAULT_STACK. EXCEPTION_STKSZ (PAGE_SIZE). - - Used for interrupt 12 - Stack Fault Exception (#SS). - - This allows the CPU to recover from invalid stack segments. Rarely - happens. - -* DOUBLEFAULT_STACK. EXCEPTION_STKSZ (PAGE_SIZE). - - Used for interrupt 8 - Double Fault Exception (#DF). - - Invoked when handling one exception causes another exception. Happens - when the kernel is very confused (e.g. kernel stack pointer corrupt). - Using a separate stack allows the kernel to recover from it well enough - in many cases to still output an oops. - -* NMI_STACK. EXCEPTION_STKSZ (PAGE_SIZE). - - Used for non-maskable interrupts (NMI). - - NMI can be delivered at any time, including when the kernel is in the - middle of switching stacks. Using IST for NMI events avoids making - assumptions about the previous state of the kernel stack. - -* DEBUG_STACK. DEBUG_STKSZ - - Used for hardware debug interrupts (interrupt 1) and for software - debug interrupts (INT3). - - When debugging a kernel, debug interrupts (both hardware and - software) can occur at any time. Using IST for these interrupts - avoids making assumptions about the previous state of the kernel - stack. - -* MCE_STACK. EXCEPTION_STKSZ (PAGE_SIZE). - - Used for interrupt 18 - Machine Check Exception (#MC). - - MCE can be delivered at any time, including when the kernel is in the - middle of switching stacks. Using IST for MCE events avoids making - assumptions about the previous state of the kernel stack. - -For more details see the Intel IA32 or AMD AMD64 architecture manuals. diff --git a/Documentation/x86_64/machinecheck b/Documentation/x86_64/machinecheck deleted file mode 100644 index a05e58e7b159..000000000000 --- a/Documentation/x86_64/machinecheck +++ /dev/null @@ -1,77 +0,0 @@ - -Configurable sysfs parameters for the x86-64 machine check code. - -Machine checks report internal hardware error conditions detected -by the CPU. Uncorrected errors typically cause a machine check -(often with panic), corrected ones cause a machine check log entry. - -Machine checks are organized in banks (normally associated with -a hardware subsystem) and subevents in a bank. The exact meaning -of the banks and subevent is CPU specific. - -mcelog knows how to decode them. - -When you see the "Machine check errors logged" message in the system -log then mcelog should run to collect and decode machine check entries -from /dev/mcelog. Normally mcelog should be run regularly from a cronjob. - -Each CPU has a directory in /sys/devices/system/machinecheck/machinecheckN -(N = CPU number) - -The directory contains some configurable entries: - -Entries: - -bankNctl -(N bank number) - 64bit Hex bitmask enabling/disabling specific subevents for bank N - When a bit in the bitmask is zero then the respective - subevent will not be reported. - By default all events are enabled. - Note that BIOS maintain another mask to disable specific events - per bank. This is not visible here - -The following entries appear for each CPU, but they are truly shared -between all CPUs. - -check_interval - How often to poll for corrected machine check errors, in seconds - (Note output is hexademical). Default 5 minutes. When the poller - finds MCEs it triggers an exponential speedup (poll more often) on - the polling interval. When the poller stops finding MCEs, it - triggers an exponential backoff (poll less often) on the polling - interval. The check_interval variable is both the initial and - maximum polling interval. - -tolerant - Tolerance level. When a machine check exception occurs for a non - corrected machine check the kernel can take different actions. - Since machine check exceptions can happen any time it is sometimes - risky for the kernel to kill a process because it defies - normal kernel locking rules. The tolerance level configures - how hard the kernel tries to recover even at some risk of - deadlock. Higher tolerant values trade potentially better uptime - with the risk of a crash or even corruption (for tolerant >= 3). - - 0: always panic on uncorrected errors, log corrected errors - 1: panic or SIGBUS on uncorrected errors, log corrected errors - 2: SIGBUS or log uncorrected errors, log corrected errors - 3: never panic or SIGBUS, log all errors (for testing only) - - Default: 1 - - Note this only makes a difference if the CPU allows recovery - from a machine check exception. Current x86 CPUs generally do not. - -trigger - Program to run when a machine check event is detected. - This is an alternative to running mcelog regularly from cron - and allows to detect events faster. - -TBD document entries for AMD threshold interrupt configuration - -For more details about the x86 machine check architecture -see the Intel and AMD architecture manuals from their developer websites. - -For more details about the architecture see -see http://one.firstfloor.org/~andi/mce.pdf diff --git a/Documentation/x86_64/mm.txt b/Documentation/x86_64/mm.txt deleted file mode 100644 index b89b6d2bebfa..000000000000 --- a/Documentation/x86_64/mm.txt +++ /dev/null @@ -1,29 +0,0 @@ - - - -Virtual memory map with 4 level page tables: - -0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm -hole caused by [48:63] sign extension -ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole -ffff810000000000 - ffffc0ffffffffff (=46 bits) direct mapping of all phys. memory -ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole -ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space -ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB) -... unused hole ... -ffffffff80000000 - ffffffff82800000 (=40 MB) kernel text mapping, from phys 0 -... unused hole ... -ffffffff88000000 - fffffffffff00000 (=1919 MB) module mapping space - -The direct mapping covers all memory in the system up to the highest -memory address (this means in some cases it can also include PCI memory -holes). - -vmalloc space is lazily synchronized into the different PML4 pages of -the processes using the page fault handler, with init_level4_pgt as -reference. - -Current X86-64 implementations only support 40 bits of address space, -but we support up to 46 bits. This expands into MBZ space in the page tables. - --Andi Kleen, Jul 2004 diff --git a/Documentation/x86_64/uefi.txt b/Documentation/x86_64/uefi.txt deleted file mode 100644 index 7d77120a5184..000000000000 --- a/Documentation/x86_64/uefi.txt +++ /dev/null @@ -1,38 +0,0 @@ -General note on [U]EFI x86_64 support -------------------------------------- - -The nomenclature EFI and UEFI are used interchangeably in this document. - -Although the tools below are _not_ needed for building the kernel, -the needed bootloader support and associated tools for x86_64 platforms -with EFI firmware and specifications are listed below. - -1. UEFI specification: http://www.uefi.org - -2. Booting Linux kernel on UEFI x86_64 platform requires bootloader - support. Elilo with x86_64 support can be used. - -3. x86_64 platform with EFI/UEFI firmware. - -Mechanics: ---------- -- Build the kernel with the following configuration. - CONFIG_FB_EFI=y - CONFIG_FRAMEBUFFER_CONSOLE=y - If EFI runtime services are expected, the following configuration should - be selected. - CONFIG_EFI=y - CONFIG_EFI_VARS=y or m # optional -- Create a VFAT partition on the disk -- Copy the following to the VFAT partition: - elilo bootloader with x86_64 support, elilo configuration file, - kernel image built in first step and corresponding - initrd. Instructions on building elilo and its dependencies - can be found in the elilo sourceforge project. -- Boot to EFI shell and invoke elilo choosing the kernel image built - in first step. -- If some or all EFI runtime services don't work, you can try following - kernel command line parameters to turn off some or all EFI runtime - services. - noefi turn off all EFI runtime services - reboot_type=k turn off EFI reboot runtime service -- cgit v1.2.3 From f0d43100f13be0fa5bf52741d7084bb27f00e621 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 29 May 2008 12:56:36 -0700 Subject: x86: extend e820 early_res support 32bit -fix #3 introduce init_pg_table_start, so xen PV could specify the value. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/head32.c | 3 ++- arch/x86/kernel/head_32.S | 2 ++ arch/x86/kernel/setup_32.c | 7 +++++++ arch/x86/lguest/boot.c | 5 +++-- arch/x86/xen/enlighten.c | 3 ++- include/asm-x86/setup.h | 4 +++- 6 files changed, 19 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index c216d3c2a991..0b6cb9fba71e 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -76,7 +76,8 @@ void __init i386_start_kernel(void) reserve_early(ramdisk_image, ramdisk_end, "RAMDISK"); } #endif - reserve_early(__pa_symbol(&_end), init_pg_tables_end, "INIT_PG_TABLE"); + reserve_early(init_pg_tables_start, init_pg_tables_end, + "INIT_PG_TABLE"); reserve_ebda_region(); diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index b2cc73768a9d..bef4618feadb 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -194,6 +194,7 @@ default_entry: xorl %ebx,%ebx /* %ebx is kept at zero */ movl $pa(pg0), %edi + movl %edi, pa(init_pg_tables_start) movl $pa(swapper_pg_pmd), %edx movl $PTE_ATTR, %eax 10: @@ -228,6 +229,7 @@ default_entry: page_pde_offset = (__PAGE_OFFSET >> 20); movl $pa(pg0), %edi + movl %edi, pa(init_pg_tables_start) movl $pa(swapper_pg_dir), %edx movl $PTE_ATTR, %eax 10: diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 08b47a2f7af0..de9c5ee77d07 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -71,6 +71,7 @@ /* This value is set up by the early boot code to point to the value immediately after the boot time page tables. It contains a *physical* address, and must not be in the .bss segment! */ +unsigned long init_pg_tables_start __initdata = ~0UL; unsigned long init_pg_tables_end __initdata = ~0UL; /* @@ -485,6 +486,10 @@ static void __init reserve_initrd(void) return; } + printk(KERN_INFO "old RAMDISK: %08llx - %08llx\n", ramdisk_image, + ramdisk_end); + + if (ramdisk_end <= end_of_lowmem) { /* All in lowmem, easy case */ /* @@ -511,6 +516,8 @@ static void __init reserve_initrd(void) "NEW RAMDISK"); initrd_start = ramdisk_here + PAGE_OFFSET; initrd_end = initrd_start + ramdisk_size; + printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n", + ramdisk_here, ramdisk_here + ramdisk_size); do_relocate_initrd = true; } diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index af65b2da3ba0..bf7c34a3aaeb 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -1011,6 +1011,7 @@ __init void lguest_init(void) * clobbered. The Launcher places our initial pagetables somewhere at * the top of our physical memory, so we don't need extra space: set * init_pg_tables_end to the end of the kernel. */ + init_pg_tables_start = __pa(pg0); init_pg_tables_end = __pa(pg0); /* Load the %fs segment register (the per-cpu segment register) with @@ -1064,9 +1065,9 @@ __init void lguest_init(void) pm_power_off = lguest_power_off; machine_ops.restart = lguest_restart; - /* Now we're set up, call start_kernel() in init/main.c and we proceed + /* Now we're set up, call i386_start_kernel() in head32.c and we proceed * to boot as normal. It never returns. */ - start_kernel(); + i386_start_kernel(); } /* * This marks the end of stage II of our journey, The Guest. diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c8a56e457d61..ccc7b84ddabf 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1211,6 +1211,7 @@ asmlinkage void __init xen_start_kernel(void) pgd = (pgd_t *)xen_start_info->pt_base; + init_pg_tables_start = __pa(pgd); init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE; init_mm.pgd = pgd; /* use the Xen pagetables to start */ @@ -1246,5 +1247,5 @@ asmlinkage void __init xen_start_kernel(void) add_preferred_console("hvc", 0, NULL); /* Start the world */ - start_kernel(); + i386_start_kernel(); } diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h index ffa0f540fc7f..64f5f0c11d66 100644 --- a/include/asm-x86/setup.h +++ b/include/asm-x86/setup.h @@ -59,9 +59,11 @@ int __init copy_e820_map(struct e820entry *biosmap, int nr_map); void __init add_memory_region(unsigned long long start, unsigned long long size, int type); -extern unsigned long init_pg_tables_end; +void __init i386_start_kernel(void); +extern unsigned long init_pg_tables_start; +extern unsigned long init_pg_tables_end; #endif /* __i386__ */ #endif /* _SETUP */ -- cgit v1.2.3 From 163872950dc856fd23849c27f60049feaac49ae6 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 29 May 2008 12:57:22 -0700 Subject: x86: extend e820 early_res support 32bit -fix #4 reserve_early pgdata for 32bit numa Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/mm/discontig_32.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 914ccf983687..47749727907e 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -159,8 +159,13 @@ static void __init allocate_pgdat(int nid) if (nid && node_has_online_mem(nid)) NODE_DATA(nid) = (pg_data_t *)node_remap_start_vaddr[nid]; else { - NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(min_low_pfn)); - min_low_pfn += PFN_UP(sizeof(pg_data_t)); + unsigned long pgdat_phys; + pgdat_phys = find_e820_area(min_low_pfn<>PAGE_SHIFT)); + reserve_early(pgdat_phys, pgdat_phys + sizeof(pg_data_t), + "NODE_DATA"); } } -- cgit v1.2.3 From a5481280b29b6a3db912ec100498bd31eaa6d2db Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 29 May 2008 12:58:37 -0700 Subject: x86: extend e820 early_res support 32bit -fix #5 reserve early numa kva, so it will not clash with new RAMDISK Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_32.c | 1 - arch/x86/mm/discontig_32.c | 12 +++++------- include/asm-x86/mmzone_32.h | 4 ---- 3 files changed, 5 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index de9c5ee77d07..6f40cb560ea9 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -614,7 +614,6 @@ void __init setup_bootmem_allocator(void) */ find_smp_config(); #endif - numa_kva_reserve(); reserve_crashkernel(); reserve_ibft_region(); diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 47749727907e..55fdbab6b014 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -357,6 +357,11 @@ unsigned long __init setup_memory(void) printk("kva_start_pfn ~ %ld find_max_low_pfn() ~ %ld\n", kva_start_pfn, max_low_pfn); printk("max_pfn = %ld\n", max_pfn); + + /* avoid clash with initrd */ + reserve_early(kva_start_pfn< system_max_low_pfn) @@ -392,13 +397,6 @@ unsigned long __init setup_memory(void) return max_low_pfn; } -void __init numa_kva_reserve(void) -{ - if (kva_pages) - reserve_bootmem(PFN_PHYS(kva_start_pfn), PFN_PHYS(kva_pages), - BOOTMEM_DEFAULT); -} - void __init zone_sizes_init(void) { int nid; diff --git a/include/asm-x86/mmzone_32.h b/include/asm-x86/mmzone_32.h index cb2cad0b65a7..faef751181b7 100644 --- a/include/asm-x86/mmzone_32.h +++ b/include/asm-x86/mmzone_32.h @@ -38,16 +38,12 @@ static inline void get_memcfg_numa(void) } extern int early_pfn_to_nid(unsigned long pfn); -extern void numa_kva_reserve(void); #else /* !CONFIG_NUMA */ #define get_memcfg_numa get_memcfg_numa_flat #define get_zholes_size(n) (0) -static inline void numa_kva_reserve(void) -{ -} #endif /* CONFIG_NUMA */ #ifdef CONFIG_DISCONTIGMEM -- cgit v1.2.3 From 9a73aa81ffb993382afed2ed404bc2b330d75427 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 29 May 2008 16:25:56 -0700 Subject: x86: 32bit numa srat fix early_ioremap leak on two node system (16g RAM) with numa config I got this crash: get_memcfg_from_srat: assigning address to rsdp RSD PTR v0 [ACPIAM] ACPI: Too big length in RSDT: 92 failed to get NUMA memory information from SRAT table NUMA - single node, flat memory mode Node: 0, start_pfn: 0, end_pfn: 153 Setting physnode_map array to node 0 for pfns: 0 ... Pid: 0, comm: swapper Not tainted 2.6.26-rc4 #4 [<80b41289>] hlt_loop+0x0/0x3 [<8011efa0>] ? alloc_remap+0x50/0x70 [<8079e32e>] alloc_node_mem_map+0x5e/0xa0 [<8012e77b>] ? printk+0x1b/0x20 [<80b590f6>] free_area_init_node+0xc6/0x470 [<80b588fc>] ? __alloc_bootmem_node+0x2c/0x50 [<80b58ad8>] ? find_min_pfn_for_node+0x38/0x70 [<8012e77b>] ? printk+0x1b/0x20 [<80b597c4>] free_area_init_nodes+0x254/0x2d0 [<80b544d7>] zone_sizes_init+0x97/0xa0 [<80b48a03>] setup_arch+0x383/0x530 [<8012e77b>] ? printk+0x1b/0x20 [<80b41aa4>] start_kernel+0x64/0x350 [<80b412d8>] i386_start_kernel+0x8/0x10 ======================= this patch increases the acpi table limit to 32. Also match early_ioremap() with early_iounmap(). Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/srat_32.c | 37 ++++++++++++++++++++++++++----------- 1 file changed, 26 insertions(+), 11 deletions(-) diff --git a/arch/x86/kernel/srat_32.c b/arch/x86/kernel/srat_32.c index 70e4a374b4e8..88971ee166d4 100644 --- a/arch/x86/kernel/srat_32.c +++ b/arch/x86/kernel/srat_32.c @@ -261,7 +261,7 @@ out_fail: struct acpi_static_rsdt { struct acpi_table_rsdt table; - u32 padding[7]; /* Allow for 7 more table entries */ + u32 padding[32]; /* Allow for 32 more table entries */ }; int __init get_memcfg_from_srat(void) @@ -297,7 +297,7 @@ int __init get_memcfg_from_srat(void) } rsdt = (struct acpi_table_rsdt *) - early_ioremap(rsdp->rsdt_physical_address, sizeof(struct acpi_table_rsdt)); + early_ioremap(rsdp->rsdt_physical_address, sizeof(saved_rsdt)); if (!rsdt) { printk(KERN_WARNING @@ -310,6 +310,7 @@ int __init get_memcfg_from_srat(void) if (strncmp(header->signature, ACPI_SIG_RSDT, strlen(ACPI_SIG_RSDT))) { printk(KERN_WARNING "ACPI: RSDT signature incorrect\n"); + early_iounmap(rsdt, sizeof(saved_rsdt)); goto out_err; } @@ -319,37 +320,51 @@ int __init get_memcfg_from_srat(void) * size of RSDT) divided by the size of each entry * (4-byte table pointers). */ - tables = (header->length - sizeof(struct acpi_table_header)) / 4; + tables = (header->length - sizeof(struct acpi_table_header)) / sizeof(u32); if (!tables) goto out_err; memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt)); - + early_iounmap(rsdt, sizeof(saved_rsdt)); if (saved_rsdt.table.header.length > sizeof(saved_rsdt)) { printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n", saved_rsdt.table.header.length); goto out_err; } - printk("Begin SRAT table scan....\n"); + printk("Begin SRAT table scan....%d\n", tables); - for (i = 0; i < tables; i++) { + for (i = 0; i < tables; i++){ + int result; + u32 length; /* Map in header, then map in full table length. */ header = (struct acpi_table_header *) early_ioremap(saved_rsdt.table.table_offset_entry[i], sizeof(struct acpi_table_header)); if (!header) break; + + printk(KERN_INFO "ACPI: %4.4s %08lX, %04X\n", + header->signature, + (unsigned long)saved_rsdt.table.table_offset_entry[i], + header->length); + + if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4)) { + early_iounmap(header, sizeof(struct acpi_table_header)); + continue; + } + + length = header->length; + early_iounmap(header, sizeof(struct acpi_table_header)); header = (struct acpi_table_header *) - early_ioremap(saved_rsdt.table.table_offset_entry[i], header->length); + early_ioremap(saved_rsdt.table.table_offset_entry[i], length); if (!header) break; - if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4)) - continue; - /* we've found the srat table. don't need to look at any more tables */ - return acpi20_parse_srat((struct acpi_table_srat *)header); + result = acpi20_parse_srat((struct acpi_table_srat *)header); + early_iounmap(header, length); + return result; } out_err: remove_all_active_ranges(); -- cgit v1.2.3 From 014c257cce65e9d1cd2d28ec1c89a37c536b151d Mon Sep 17 00:00:00 2001 From: Abhishek Sagar Date: Sat, 31 May 2008 14:23:50 +0530 Subject: ftrace: core support for ARM Core ftrace support for the ARM architecture, which includes support for dynamic function tracing. Signed-off-by: Abhishek Sagar Signed-off-by: Ingo Molnar --- arch/arm/Kconfig | 2 + arch/arm/boot/compressed/Makefile | 6 ++ arch/arm/kernel/Makefile | 5 ++ arch/arm/kernel/armksyms.c | 5 ++ arch/arm/kernel/entry-common.S | 47 ++++++++++++++ arch/arm/kernel/ftrace.c | 128 ++++++++++++++++++++++++++++++++++++++ 6 files changed, 193 insertions(+) create mode 100644 arch/arm/kernel/ftrace.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b786e68914d4..3845e5c8a34f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -14,6 +14,8 @@ config ARM select HAVE_OPROFILE select HAVE_KPROBES if (!XIP_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) + select HAVE_FTRACE if (!XIP_KERNEL) + select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE) help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index de9d9ee50958..95baac4939e0 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -69,6 +69,12 @@ SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ targets := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \ head.o misc.o $(OBJS) + +ifeq ($(CONFIG_FTRACE),y) +ORIG_CFLAGS := $(KBUILD_CFLAGS) +KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) +endif + EXTRA_CFLAGS := -fpic -fno-builtin EXTRA_AFLAGS := diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index ad455ff5aebe..eb9092ca8008 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -4,6 +4,10 @@ AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) +ifdef CONFIG_DYNAMIC_FTRACE +CFLAGS_REMOVE_ftrace.o = -pg +endif + # Object file lists. obj-y := compat.o entry-armv.o entry-common.o irq.o \ @@ -18,6 +22,7 @@ obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o obj-$(CONFIG_ATAGS_PROC) += atags.o diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 688b7b1ee416..3b132215cbf8 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -48,6 +48,11 @@ extern void __aeabi_ulcmp(void); extern void fpundefinstr(void); extern void fp_enter(void); +#ifdef CONFIG_FTRACE +extern void mcount(void); +EXPORT_SYMBOL(mcount); +#endif + /* * This has a special calling convention; it doesn't * modify any of the usual registers, except for LR. diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 597ed00a08d8..8f79a4789ed4 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -99,6 +99,53 @@ ENTRY(ret_from_fork) #undef CALL #define CALL(x) .long x +#ifdef CONFIG_FTRACE +#ifdef CONFIG_DYNAMIC_FTRACE +ENTRY(mcount) + stmdb sp!, {r0-r3, lr} + mov r0, lr + + .globl mcount_call +mcount_call: + bl ftrace_stub + ldmia sp!, {r0-r3, pc} + +ENTRY(ftrace_caller) + stmdb sp!, {r0-r3, lr} + ldr r1, [fp, #-4] + mov r0, lr + + .globl ftrace_call +ftrace_call: + bl ftrace_stub + ldmia sp!, {r0-r3, pc} + +#else + +ENTRY(mcount) + stmdb sp!, {r0-r3, lr} + ldr r0, =ftrace_trace_function + ldr r2, [r0] + adr r0, ftrace_stub + cmp r0, r2 + bne trace + ldmia sp!, {r0-r3, pc} + +trace: + ldr r1, [fp, #-4] + mov r0, lr + mov lr, pc + mov pc, r2 + ldmia sp!, {r0-r3, pc} + +#endif /* CONFIG_DYNAMIC_FTRACE */ + + .globl ftrace_stub +ftrace_stub: + mov pc, lr + +#endif /* CONFIG_FTRACE */ + /*============================================================================= * SWI handler *----------------------------------------------------------------------------- diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c new file mode 100644 index 000000000000..f4cb4cc3fa0c --- /dev/null +++ b/arch/arm/kernel/ftrace.c @@ -0,0 +1,128 @@ +/* + * Dynamic function tracing support. + * + * Copyright (C) 2008 Abhishek Sagar + * + * For licencing details, see COPYING. + * + * Defines low-level handling of mcount calls when the kernel + * is compiled with the -pg flag. When using dynamic ftrace, the + * mcount call-sites get patched lazily with NOP till they are + * enabled. All code mutation routines here take effect atomically. + */ + +#include +#include + +#define INSN_SIZE 4 +#define PC_OFFSET 8 +#define BL_OPCODE 0xeb000000 +#define BL_OFFSET_MASK 0x00ffffff + +static unsigned long bl_insn; +static const unsigned long NOP = 0xe1a00000; /* mov r0, r0 */ + +/* return true if mcount call site is already patched/no-op'ed */ +int ftrace_ip_converted(unsigned long pc) +{ + unsigned long save; + + pc -= INSN_SIZE; + save = *(unsigned long *)pc; + return save == NOP; +} + +unsigned char *ftrace_nop_replace(void) +{ + return (char *)&NOP; +} + +/* construct a branch (BL) instruction to addr */ +unsigned char *ftrace_call_replace(unsigned long pc, unsigned long addr) +{ + long offset; + + offset = (long)addr - (long)(pc - INSN_SIZE + PC_OFFSET); + if (unlikely(offset < -33554432 || offset > 33554428)) { + /* Can't generate branches that far (from ARM ARM). Ftrace + * doesn't generate branches outside of core kernel text. + */ + WARN_ON_ONCE(1); + return NULL; + } + offset = (offset >> 2) & BL_OFFSET_MASK; + bl_insn = BL_OPCODE | offset; + return (unsigned char *)&bl_insn; +} + +int ftrace_modify_code(unsigned long pc, unsigned char *old_code, + unsigned char *new_code) +{ + unsigned long err = 0, replaced = 0, old, new; + + old = *(unsigned long *)old_code; + new = *(unsigned long *)new_code; + pc -= INSN_SIZE; + + __asm__ __volatile__ ( + "1: ldr %1, [%2] \n" + " cmp %1, %4 \n" + "2: streq %3, [%2] \n" + " cmpne %1, %3 \n" + " movne %0, #2 \n" + "3:\n" + + ".section .fixup, \"ax\"\n" + "4: mov %0, #1 \n" + " b 3b \n" + ".previous\n" + + ".section __ex_table, \"a\"\n" + " .long 1b, 4b \n" + " .long 2b, 4b \n" + ".previous\n" + + : "=r"(err), "=r"(replaced) + : "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced) + : "memory"); + + if (!err && (replaced == old)) + flush_icache_range(pc, pc + INSN_SIZE); + + return err; +} + +int ftrace_update_ftrace_func(ftrace_func_t func) +{ + int ret; + unsigned long pc, old; + unsigned char *new; + + pc = (unsigned long)&ftrace_call; + pc += INSN_SIZE; + memcpy(&old, &ftrace_call, INSN_SIZE); + new = ftrace_call_replace(pc, (unsigned long)func); + ret = ftrace_modify_code(pc, (unsigned char *)&old, new); + return ret; +} + +int ftrace_mcount_set(unsigned long *data) +{ + unsigned long pc, old; + unsigned long *addr = data; + unsigned char *new; + + pc = (unsigned long)&mcount_call; + pc += INSN_SIZE; + memcpy(&old, &mcount_call, INSN_SIZE); + new = ftrace_call_replace(pc, *addr); + *addr = ftrace_modify_code(pc, (unsigned char *)&old, new); + return 0; +} + +/* run from kstop_machine */ +int __init ftrace_dyn_arch_init(void *data) +{ + ftrace_mcount_set(data); + return 0; +} -- cgit v1.2.3 From d2cd74b158d7214a556226e3312f9fb1de64d7ae Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Jun 2008 11:45:53 +0200 Subject: [ALSA] emu10k1 - Fix inverted Analog/Digital mixer switch on Audigy2 On Audigy2 Platinum, the Analog/Digital mixer switch is inverted. https://bugzilla.novell.com/show_bug.cgi?id=396204 The patch adds a simple workaround. There might be another device requiring a similar fix, too (or fix for audigy2 generically), but right now I fix only the known broken one. Signed-off-by: Takashi Iwai --- include/sound/emu10k1.h | 1 + sound/pci/emu10k1/emu10k1_main.c | 1 + sound/pci/emu10k1/emumixer.c | 13 ++++++++++--- 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/include/sound/emu10k1.h b/include/sound/emu10k1.h index 7b7b9b13b4dd..10ee28eac018 100644 --- a/include/sound/emu10k1.h +++ b/include/sound/emu10k1.h @@ -1670,6 +1670,7 @@ struct snd_emu_chip_details { unsigned char spi_dac; /* SPI interface for DAC */ unsigned char i2c_adc; /* I2C interface for ADC */ unsigned char adc_1361t; /* Use Philips 1361T ADC */ + unsigned char invert_shared_spdif; /* analog/digital switch inverted */ const char *driver; const char *name; const char *id; /* for backward compatibility - can be NULL if not needed */ diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index 548c9cc81af5..2f283ea6ad9a 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -1528,6 +1528,7 @@ static struct snd_emu_chip_details emu_chip_details[] = { .ca0151_chip = 1, .spk71 = 1, .spdif_bug = 1, + .invert_shared_spdif = 1, /* digital/analog switch swapped */ .adc_1361t = 1, /* 24 bit capture instead of 16bit. Fixes ALSA bug#324 */ .ac97_chip = 1} , {.vendor = 0x1102, .device = 0x0004, .revision = 0x04, diff --git a/sound/pci/emu10k1/emumixer.c b/sound/pci/emu10k1/emumixer.c index fd221209abcb..f34bbfb705f5 100644 --- a/sound/pci/emu10k1/emumixer.c +++ b/sound/pci/emu10k1/emumixer.c @@ -1578,6 +1578,10 @@ static int snd_emu10k1_shared_spdif_get(struct snd_kcontrol *kcontrol, ucontrol->value.integer.value[0] = inl(emu->port + A_IOCFG) & A_IOCFG_GPOUT0 ? 1 : 0; else ucontrol->value.integer.value[0] = inl(emu->port + HCFG) & HCFG_GPOUT0 ? 1 : 0; + if (emu->card_capabilities->invert_shared_spdif) + ucontrol->value.integer.value[0] = + !ucontrol->value.integer.value[0]; + return 0; } @@ -1586,15 +1590,18 @@ static int snd_emu10k1_shared_spdif_put(struct snd_kcontrol *kcontrol, { unsigned long flags; struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol); - unsigned int reg, val; + unsigned int reg, val, sw; int change = 0; + sw = ucontrol->value.integer.value[0]; + if (emu->card_capabilities->invert_shared_spdif) + sw = !sw; spin_lock_irqsave(&emu->reg_lock, flags); if ( emu->card_capabilities->i2c_adc) { /* Do nothing for Audigy 2 ZS Notebook */ } else if (emu->audigy) { reg = inl(emu->port + A_IOCFG); - val = ucontrol->value.integer.value[0] ? A_IOCFG_GPOUT0 : 0; + val = sw ? A_IOCFG_GPOUT0 : 0; change = (reg & A_IOCFG_GPOUT0) != val; if (change) { reg &= ~A_IOCFG_GPOUT0; @@ -1603,7 +1610,7 @@ static int snd_emu10k1_shared_spdif_put(struct snd_kcontrol *kcontrol, } } reg = inl(emu->port + HCFG); - val = ucontrol->value.integer.value[0] ? HCFG_GPOUT0 : 0; + val = sw ? HCFG_GPOUT0 : 0; change |= (reg & HCFG_GPOUT0) != val; if (change) { reg &= ~HCFG_GPOUT0; -- cgit v1.2.3 From 831d991821daedd4839073dbca55514432ef1768 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Mon, 3 Sep 2007 10:17:39 +0200 Subject: x86: add PCI extended config space access for AMD Barcelona This patch implements PCI extended configuration space access for AMD's Barcelona CPUs. It extends the method using CF8/CFC IO addresses. An x86 capability bit has been introduced that is set for CPUs supporting PCI extended config space accesses. Signed-off-by: Robert Richter Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd.c | 4 ++++ arch/x86/kernel/cpu/amd_64.c | 3 +++ arch/x86/kernel/setup.c | 13 +++++++++++++ arch/x86/kernel/setup.h | 26 ++++++++++++++++++++++++++ arch/x86/kernel/setup_64.c | 2 ++ arch/x86/pci/direct.c | 21 +++++++++++++++------ include/asm-x86/cpufeature.h | 2 ++ 7 files changed, 65 insertions(+), 6 deletions(-) create mode 100644 arch/x86/kernel/setup.h diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 245866828294..99221f9834e4 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -6,6 +6,7 @@ #include #include +#include "../setup.h" #include "cpu.h" /* @@ -308,6 +309,9 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) if (cpu_has_xmm2) set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); + + if (c->x86 == 0x10) + amd_enable_pci_ext_cfg(c); } static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size) diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c index c815c2c0484b..180097e99219 100644 --- a/arch/x86/kernel/cpu/amd_64.c +++ b/arch/x86/kernel/cpu/amd_64.c @@ -217,6 +217,9 @@ void __cpuinit init_amd(struct cpuinfo_x86 *c) if (c->x86 == 0x10) fam10h_check_enable_mmcfg(); + if (c->x86 == 0x10) + amd_enable_pci_ext_cfg(c); + if (amd_apic_timer_broken()) disable_apic_timer = 1; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 6f80b852a196..d8f171234013 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -136,4 +136,17 @@ void __init setup_per_cpu_areas(void) setup_cpumask_of_cpu(); } +#define ENABLE_CF8_EXT_CFG (1ULL << 46) + +void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c) +{ + u64 reg; + rdmsrl(MSR_AMD64_NB_CFG, reg); + if (!(reg & ENABLE_CF8_EXT_CFG)) { + reg |= ENABLE_CF8_EXT_CFG; + wrmsrl(MSR_AMD64_NB_CFG, reg); + } + set_cpu_cap(c, X86_FEATURE_PCI_EXT_CFG); +} + #endif diff --git a/arch/x86/kernel/setup.h b/arch/x86/kernel/setup.h new file mode 100644 index 000000000000..66cc2c7f961d --- /dev/null +++ b/arch/x86/kernel/setup.h @@ -0,0 +1,26 @@ +/* + * Internal declarations for shared x86 setup code. + * + * Copyright (c) 2008 Advanced Micro Devices, Inc. + * Contributed by Robert Richter + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307 USA + */ + +#ifndef _ARCH_X86_KERNEL_SETUP_H + +extern void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c); + +#endif /* _ARCH_X86_KERNEL_SETUP_H */ diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 25afdd80a3cf..215bd67e5b6c 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -73,6 +73,8 @@ #include #include +#include "setup.h" + #include #ifdef CONFIG_PARAVIRT #include diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c index 21d1e0e0d535..27d61b63def6 100644 --- a/arch/x86/pci/direct.c +++ b/arch/x86/pci/direct.c @@ -8,18 +8,21 @@ #include "pci.h" /* - * Functions for accessing PCI configuration space with type 1 accesses + * Functions for accessing PCI base (first 256 bytes) and extended + * (4096 bytes per PCI function) configuration space with type 1 + * accesses. */ #define PCI_CONF1_ADDRESS(bus, devfn, reg) \ - (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3)) + (0x80000000 | ((reg & 0xF00) << 16) | (bus << 16) \ + | (devfn << 8) | (reg & 0xFC)) static int pci_conf1_read(unsigned int seg, unsigned int bus, unsigned int devfn, int reg, int len, u32 *value) { unsigned long flags; - if ((bus > 255) || (devfn > 255) || (reg > 255)) { + if ((bus > 255) || (devfn > 255) || (reg > 4095)) { *value = -1; return -EINVAL; } @@ -50,7 +53,7 @@ static int pci_conf1_write(unsigned int seg, unsigned int bus, { unsigned long flags; - if ((bus > 255) || (devfn > 255) || (reg > 255)) + if ((bus > 255) || (devfn > 255) || (reg > 4095)) return -EINVAL; spin_lock_irqsave(&pci_config_lock, flags); @@ -260,10 +263,16 @@ void __init pci_direct_init(int type) return; printk(KERN_INFO "PCI: Using configuration type %d for base access\n", type); - if (type == 1) + if (type == 1) { raw_pci_ops = &pci_direct_conf1; - else + if (!raw_pci_ext_ops && cpu_has_pci_ext_cfg) { + printk(KERN_INFO "PCI: Using configuration type 1 " + "for extended access\n"); + raw_pci_ext_ops = &pci_direct_conf1; + } + } else { raw_pci_ops = &pci_direct_conf2; + } } int __init pci_direct_probe(void) diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 0d609c837a41..40fcbba00f15 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -79,6 +79,7 @@ #define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */ #define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */ #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */ +#define X86_FEATURE_PCI_EXT_CFG (3*32+19) /* PCI extended cfg access */ /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */ #define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */ @@ -187,6 +188,7 @@ extern const char * const x86_power_flags[32]; #define cpu_has_gbpages boot_cpu_has(X86_FEATURE_GBPAGES) #define cpu_has_arch_perfmon boot_cpu_has(X86_FEATURE_ARCH_PERFMON) #define cpu_has_pat boot_cpu_has(X86_FEATURE_PAT) +#define cpu_has_pci_ext_cfg boot_cpu_has(X86_FEATURE_PCI_EXT_CFG) #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64) # define cpu_has_invlpg 1 -- cgit v1.2.3 From 6fc92866a4a6778a9732a14b61f70cb9014b2a1a Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 10:54:16 +0200 Subject: fix build bug in "x86: add PCI extended config space access for AMD Barcelona" Signed-off-by: Ingo Molnar --- include/asm-x86/mmconfig.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h index 95beda07c6fa..46d6bb135df4 100644 --- a/include/asm-x86/mmconfig.h +++ b/include/asm-x86/mmconfig.h @@ -9,4 +9,6 @@ static inline void fam10h_check_enable_mmcfg(void) { } static inline void check_enable_amd_mmconf_dmi(void) { } #endif +extern void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c); + #endif -- cgit v1.2.3 From c46e62f73569d7ef42255bd6f31e35925b7f1492 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 28 May 2008 12:42:57 +0200 Subject: i8259: fix final ugliness Introduce IRQx_VECTOR on 32-bit, so that #ifdef noise is kept down. There should be no object code change. [ mingo@elte.hu: merged to x86/irq not x86/i8259 due to x86/irq having restructured the vector code into asm-x86/irq_vectors.h, which this patch touches. ] Signed-off-by: Pavel Machek Signed-off-by: Ingo Molnar --- arch/x86/kernel/i8259.c | 22 ++++++++-------------- include/asm-x86/irq_vectors.h | 9 ++++++--- 2 files changed, 14 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 7a0fda8f01b5..dc92b49d9204 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -297,34 +297,28 @@ void init_8259A(int auto_eoi) * outb_pic - this has to work on a wide range of PC hardware. */ outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ -#ifndef CONFIG_X86_64 - outb_pic(0x20 + 0, PIC_MASTER_IMR); /* ICW2: 8259A-1 IR0-7 mapped to 0x20-0x27 */ - outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ -#else /* CONFIG_X86_64 */ - /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ + + /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 on x86-64, + to 0x20-0x27 on i386 */ outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); + /* 8259A-1 (the master) has a slave on IR2 */ - outb_pic(0x04, PIC_MASTER_IMR); -#endif /* CONFIG_X86_64 */ + outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); + if (auto_eoi) /* master does Auto EOI */ outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); else /* master expects normal EOI */ outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ -#ifndef CONFIG_X86_64 - outb_pic(0x20 + 8, PIC_SLAVE_IMR); /* ICW2: 8259A-2 IR0-7 mapped to 0x28-0x2f */ - outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ - outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ -#else /* CONFIG_X86_64 */ - /* ICW2: 8259A-2 IR0-7 mapped to 0x38-0x3f */ + + /* ICW2: 8259A-2 IR0-7 mapped to IRQ8_VECTOR */ outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); -#endif /* CONFIG_X86_64 */ if (auto_eoi) /* * In AEOI mode we just have to mask the interrupt diff --git a/include/asm-x86/irq_vectors.h b/include/asm-x86/irq_vectors.h index 3cb6d8c77b39..b58581e2e24e 100644 --- a/include/asm-x86/irq_vectors.h +++ b/include/asm-x86/irq_vectors.h @@ -18,17 +18,20 @@ #endif /* - * Vectors 0x20-0x2f are used for ISA interrupts on 32 bit. - * * Reserve the lowest usable priority level 0x20 - 0x2f for triggering * cleanup after irq migration on 64 bit. */ #define IRQ_MOVE_CLEANUP_VECTOR FIRST_EXTERNAL_VECTOR /* - * Vectors 0x30-0x3f are used for ISA interrupts on 64 bit + * Vectors 0x20-0x2f are used for ISA interrupts on 32 bit. + * Vectors 0x30-0x3f are used for ISA interrupts on 64 bit. */ +#ifdef CONFIG_X86_32 +#define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR) +#else #define IRQ0_VECTOR (FIRST_EXTERNAL_VECTOR + 0x10) +#endif #define IRQ1_VECTOR (IRQ0_VECTOR + 1) #define IRQ2_VECTOR (IRQ0_VECTOR + 2) #define IRQ3_VECTOR (IRQ0_VECTOR + 3) -- cgit v1.2.3 From c78277288e3d561d55fb48bc0fe8d6e2cf4d0880 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 29 May 2008 09:02:19 +0100 Subject: CONFIG_PM_SLEEP fix: xen: fix compilation when CONFIG_PM_SLEEP is disabled Xen save/restore depends on CONFIG_PM_SLEEP being set for device_power_up/down. Signed-off-by: Jeremy Fitzhardinge Acked-by: Randy Dunlap Signed-off-by: Ingo Molnar --- drivers/xen/manage.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index 675c3dd23962..5b546e365f00 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -31,6 +31,7 @@ enum shutdown_state { /* Ignore multiple shutdown requests. */ static enum shutdown_state shutting_down = SHUTDOWN_INVALID; +#ifdef CONFIG_PM_SLEEP static int xen_suspend(void *data) { int *cancelled = data; @@ -121,6 +122,7 @@ out: #endif shutting_down = SHUTDOWN_INVALID; } +#endif /* CONFIG_PM_SLEEP */ static void shutdown_handler(struct xenbus_watch *watch, const char **vec, unsigned int len) -- cgit v1.2.3 From 1a5726528a70bb239bdd149aef7f2155cd2b1699 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 12:21:36 +0200 Subject: fix build bug in "x86: add PCI extended config space access for AMD Barcelona" --- arch/x86/kernel/cpu/amd.c | 1 + include/asm-x86/mmconfig.h | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 99221f9834e4..656b40aed647 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #include "../setup.h" diff --git a/include/asm-x86/mmconfig.h b/include/asm-x86/mmconfig.h index 46d6bb135df4..691798fbee10 100644 --- a/include/asm-x86/mmconfig.h +++ b/include/asm-x86/mmconfig.h @@ -9,6 +9,10 @@ static inline void fam10h_check_enable_mmcfg(void) { } static inline void check_enable_amd_mmconf_dmi(void) { } #endif +#if defined(CONFIG_SMP) && defined(CONFIG_X86_64) extern void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c); +#else +static inline void amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c) { } +#endif #endif -- cgit v1.2.3 From c1f64a58003fd2efaa725a857e269a15f765791a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 27 May 2008 09:47:13 -0700 Subject: x86: MMIO and gcc re-ordering issue On Tue, 27 May 2008, Linus Torvalds wrote: > > Expecting people to fix up all drivers is simply not going to happen. And > serializing things shouldn't be *that* expensive. People who cannot take > the expense can continue to use the magic __raw_writel() etc stuff. Of course, for non-x86, you kind of have to expect drivers to be well-behaved, so non-x86 can probably avoid this simply because there are less relevant drivers involved. Here's a UNTESTED patch for x86 that may or may not compile and work, and which serializes (on a compiler level) the IO accesses against regular memory accesses. __read[bwlq]()/__write[bwlq]() are not serialized with a :"memory" barrier, although since they still use "asm volatile" I suspect that i practice they are probably serial too. Did not look very closely at any generated code (only did a trivial test to see that the code looks *roughly* correct). Signed-off-by: Ingo Molnar --- include/asm-x86/io.h | 56 ++++++++++++++++++++++++++++++++++++++ include/asm-x86/io_32.h | 49 ---------------------------------- include/asm-x86/io_64.h | 71 ------------------------------------------------- 3 files changed, 56 insertions(+), 120 deletions(-) diff --git a/include/asm-x86/io.h b/include/asm-x86/io.h index d5b11f60dbd0..8e9eca93f9b9 100644 --- a/include/asm-x86/io.h +++ b/include/asm-x86/io.h @@ -3,6 +3,62 @@ #define ARCH_HAS_IOREMAP_WC +#include + +#define build_mmio_read(name, size, type, reg, barrier) \ +static inline type name(const volatile void __iomem *addr) \ +{ type ret; asm volatile("mov" size " %1,%0":"=" reg (ret) \ +:"m" (*(volatile type __force *)addr) barrier); return ret; } + +#define build_mmio_write(name, size, type, reg, barrier) \ +static inline void name(type val, volatile void __iomem *addr) \ +{ asm volatile("mov" size " %0,%1": :reg (val), \ +"m" (*(volatile type __force *)addr) barrier); } + +build_mmio_read(readb, "b", unsigned char, "q", :"memory") +build_mmio_read(readw, "w", unsigned short, "r", :"memory") +build_mmio_read(readl, "l", unsigned int, "r", :"memory") + +build_mmio_read(__readb, "b", unsigned char, "q", ) +build_mmio_read(__readw, "w", unsigned short, "r", ) +build_mmio_read(__readl, "l", unsigned int, "r", ) + +build_mmio_write(writeb, "b", unsigned char, "q", :"memory") +build_mmio_write(writew, "w", unsigned short, "r", :"memory") +build_mmio_write(writel, "l", unsigned int, "r", :"memory") + +build_mmio_write(__writeb, "b", unsigned char, "q", ) +build_mmio_write(__writew, "w", unsigned short, "r", ) +build_mmio_write(__writel, "l", unsigned int, "r", ) + +#define readb_relaxed(a) __readb(a) +#define readw_relaxed(a) __readw(a) +#define readl_relaxed(a) __readl(a) +#define __raw_readb __readb +#define __raw_readw __readw +#define __raw_readl __readl + +#define __raw_writeb __writeb +#define __raw_writew __writew +#define __raw_writel __writel + +#define mmiowb() barrier() + +#ifdef CONFIG_X86_64 +build_mmio_read(readq, "q", unsigned long, "r", :"memory") +build_mmio_read(__readq, "q", unsigned long, "r", ) +build_mmio_write(writeq, "q", unsigned long, "r", :"memory") +build_mmio_write(__writeq, "q", unsigned long, "r", ) + +#define readq_relaxed(a) __readq(a) +#define __raw_readq __readq +#define __raw_writeq writeq + +/* Let people know we have them */ +#define readq readq +#define writeq writeq +#endif + #ifdef CONFIG_X86_32 # include "io_32.h" #else diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h index 049e81e797a0..d71be8df9797 100644 --- a/include/asm-x86/io_32.h +++ b/include/asm-x86/io_32.h @@ -149,55 +149,6 @@ extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys); #define virt_to_bus virt_to_phys #define bus_to_virt phys_to_virt -/* - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the x86 architecture, we just read/write the - * memory location directly. - */ - -static inline unsigned char readb(const volatile void __iomem *addr) -{ - return *(volatile unsigned char __force *)addr; -} - -static inline unsigned short readw(const volatile void __iomem *addr) -{ - return *(volatile unsigned short __force *)addr; -} - -static inline unsigned int readl(const volatile void __iomem *addr) -{ - return *(volatile unsigned int __force *) addr; -} - -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl - -static inline void writeb(unsigned char b, volatile void __iomem *addr) -{ - *(volatile unsigned char __force *)addr = b; -} - -static inline void writew(unsigned short b, volatile void __iomem *addr) -{ - *(volatile unsigned short __force *)addr = b; -} - -static inline void writel(unsigned int b, volatile void __iomem *addr) -{ - *(volatile unsigned int __force *)addr = b; -} -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -#define mmiowb() - static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) { diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h index 0930bedf9e4d..ddd8058a5026 100644 --- a/include/asm-x86/io_64.h +++ b/include/asm-x86/io_64.h @@ -204,77 +204,6 @@ extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys); #define virt_to_bus virt_to_phys #define bus_to_virt phys_to_virt -/* - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the x86 architecture, we just read/write the - * memory location directly. - */ - -static inline __u8 __readb(const volatile void __iomem *addr) -{ - return *(__force volatile __u8 *)addr; -} - -static inline __u16 __readw(const volatile void __iomem *addr) -{ - return *(__force volatile __u16 *)addr; -} - -static __always_inline __u32 __readl(const volatile void __iomem *addr) -{ - return *(__force volatile __u32 *)addr; -} - -static inline __u64 __readq(const volatile void __iomem *addr) -{ - return *(__force volatile __u64 *)addr; -} - -#define readb(x) __readb(x) -#define readw(x) __readw(x) -#define readl(x) __readl(x) -#define readq(x) __readq(x) -#define readb_relaxed(a) readb(a) -#define readw_relaxed(a) readw(a) -#define readl_relaxed(a) readl(a) -#define readq_relaxed(a) readq(a) -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define __raw_readq readq - -#define mmiowb() - -static inline void __writel(__u32 b, volatile void __iomem *addr) -{ - *(__force volatile __u32 *)addr = b; -} - -static inline void __writeq(__u64 b, volatile void __iomem *addr) -{ - *(__force volatile __u64 *)addr = b; -} - -static inline void __writeb(__u8 b, volatile void __iomem *addr) -{ - *(__force volatile __u8 *)addr = b; -} - -static inline void __writew(__u16 b, volatile void __iomem *addr) -{ - *(__force volatile __u16 *)addr = b; -} - -#define writeq(val, addr) __writeq((val), (addr)) -#define writel(val, addr) __writel((val), (addr)) -#define writew(val, addr) __writew((val), (addr)) -#define writeb(val, addr) __writeb((val), (addr)) -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel -#define __raw_writeq writeq - void __memcpy_fromio(void *, unsigned long, unsigned); void __memcpy_toio(unsigned long, const void *, unsigned); -- cgit v1.2.3 From 76094a2cf46e4ab776055d4086615b884408568c Mon Sep 17 00:00:00 2001 From: Abhishek Sagar Date: Wed, 28 May 2008 00:03:18 +0530 Subject: ftrace: distinguish kretprobe'd functions in trace logs Tracing functions via ftrace which have a kretprobe installed on them, can produce misleading output in their trace logs. E.g, consider the correct trace of the following sequence: do_IRQ() { ~ irq_enter(); ~ } Trace log (sample): -0 [00] 4154504455.781616: irq_enter <- do_IRQ But if irq_enter() has a kretprobe installed on it, the return value stored on the stack at each invocation is modified to divert the return to a kprobe trampoline function called kretprobe_trampoline(). So with this the trace would (currently) look like: -0 [00] 4154504455.781616: irq_enter <- kretprobe_trampoline Now this is quite misleading to the end user, as it suggests something that didn't actually happen. So just to avoid such misinterpretations, the inlined patch aims to output such a log as: -0 [00] 4154504455.781616: irq_enter <- [unknown/kretprobe'd] Signed-off-by: Abhishek Sagar Acked-by: Steven Rostedt Signed-off-by: Ingo Molnar --- kernel/trace/trace.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 0feae23d9893..12f5e817380e 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -1199,6 +1200,20 @@ static void s_stop(struct seq_file *m, void *p) mutex_unlock(&trace_types_lock); } +#define KRETPROBE_MSG "[unknown/kretprobe'd]" + +#ifdef CONFIG_KRETPROBES +static inline int kretprobed(unsigned long addr) +{ + return addr == (unsigned long)kretprobe_trampoline; +} +#else +static inline int kretprobed(unsigned long addr) +{ + return 0; +} +#endif /* CONFIG_KRETPROBES */ + static int seq_print_sym_short(struct trace_seq *s, const char *fmt, unsigned long address) { @@ -1434,7 +1449,10 @@ print_lat_fmt(struct trace_iterator *iter, unsigned int trace_idx, int cpu) case TRACE_FN: seq_print_ip_sym(s, entry->fn.ip, sym_flags); trace_seq_puts(s, " ("); - seq_print_ip_sym(s, entry->fn.parent_ip, sym_flags); + if (kretprobed(entry->fn.parent_ip)) + trace_seq_puts(s, KRETPROBE_MSG); + else + seq_print_ip_sym(s, entry->fn.parent_ip, sym_flags); trace_seq_puts(s, ")\n"); break; case TRACE_CTX: @@ -1514,8 +1532,11 @@ static int print_trace_fmt(struct trace_iterator *iter) ret = trace_seq_printf(s, " <-"); if (!ret) return 0; - ret = seq_print_ip_sym(s, entry->fn.parent_ip, - sym_flags); + if (kretprobed(entry->fn.parent_ip)) + ret = trace_seq_puts(s, KRETPROBE_MSG); + else + ret = seq_print_ip_sym(s, entry->fn.parent_ip, + sym_flags); if (!ret) return 0; } -- cgit v1.2.3 From 83bea8e1fa0c47b30664b6f92397c016c22f77fb Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 27 May 2008 21:03:46 +0200 Subject: x86: fix incomplete include guard in include/asm-x86/seccomp_32.h Signed-off-by: Vegard Nossum Signed-off-by: Ingo Molnar --- include/asm-x86/seccomp_32.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-x86/seccomp_32.h b/include/asm-x86/seccomp_32.h index 18da19e89bff..36e71c5f306f 100644 --- a/include/asm-x86/seccomp_32.h +++ b/include/asm-x86/seccomp_32.h @@ -1,4 +1,5 @@ #ifndef _ASM_SECCOMP_H +#define _ASM_SECCOMP_H #include -- cgit v1.2.3 From 6330a30a76c1e62d4b4ec238368957f8febf9113 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Wed, 28 May 2008 09:46:19 +0200 Subject: x86: break mutual header inclusion This breaks up the mutual inclusion between headers ptrace.h and vm86.h by moving some small part of vm86.h which is needed by ptrace.h into processor-flags.h. We also try to move #include lines to the top. This has been compile tested on x86_32 and x86_64 defconfig, and run through 'make headers_check'. Cc: Adrian Bunk Signed-off-by: Vegard Nossum Signed-off-by: Ingo Molnar --- include/asm-x86/processor-flags.h | 6 ++++++ include/asm-x86/ptrace.h | 8 +++++--- include/asm-x86/vm86.h | 8 +------- 3 files changed, 12 insertions(+), 10 deletions(-) diff --git a/include/asm-x86/processor-flags.h b/include/asm-x86/processor-flags.h index 199cab107d85..092b39b3a7e6 100644 --- a/include/asm-x86/processor-flags.h +++ b/include/asm-x86/processor-flags.h @@ -88,4 +88,10 @@ #define CX86_ARR_BASE 0xc4 #define CX86_RCR_BASE 0xdc +#ifdef CONFIG_VM86 +#define X86_VM_MASK X86_EFLAGS_VM +#else +#define X86_VM_MASK 0 /* No VM86 support */ +#endif + #endif /* __ASM_I386_PROCESSOR_FLAGS_H */ diff --git a/include/asm-x86/ptrace.h b/include/asm-x86/ptrace.h index 9f922b0b95d6..8a71db803da6 100644 --- a/include/asm-x86/ptrace.h +++ b/include/asm-x86/ptrace.h @@ -3,7 +3,12 @@ #include /* For __user */ #include +#include +#ifdef __KERNEL__ +#include /* the DS BTS struct is used for ptrace too */ +#include +#endif #ifndef __ASSEMBLY__ @@ -55,9 +60,6 @@ struct pt_regs { unsigned long ss; }; -#include -#include - #endif /* __KERNEL__ */ #else /* __i386__ */ diff --git a/include/asm-x86/vm86.h b/include/asm-x86/vm86.h index cbf4a0effa75..5ce351325e01 100644 --- a/include/asm-x86/vm86.h +++ b/include/asm-x86/vm86.h @@ -115,7 +115,6 @@ struct vm86plus_info_struct { unsigned long is_vm86pus:1; /* for vm86 internal use */ unsigned char vm86dbg_intxxtab[32]; /* for debugger */ }; - struct vm86plus_struct { struct vm86_regs regs; unsigned long flags; @@ -128,11 +127,7 @@ struct vm86plus_struct { #ifdef __KERNEL__ -#ifdef CONFIG_VM86 -#define X86_VM_MASK X86_EFLAGS_VM -#else -#define X86_VM_MASK 0 /* No VM86 support */ -#endif +#include /* * This is the (kernel) stack-layout when we have done a "SAVE_ALL" from vm86 @@ -142,7 +137,6 @@ struct vm86plus_struct { * at the end of the structure. Look at ptrace.h to see the "normal" * setup. For user space layout see 'struct vm86_regs' above. */ -#include struct kernel_vm86_regs { /* -- cgit v1.2.3 From ad90c0e3ce8d20d6873b57e36181ef6d7a0097fe Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 27 May 2008 20:48:37 -0400 Subject: ftrace: user update and disable dynamic ftrace daemon In dynamic ftrace, the mcount function starts off pointing to a stub function that just returns. On start up, the call to the stub is modified to point to a "record_ip" function. The job of the record_ip function is to add the function to a pre-allocated hash list. If the function is already there, it simply is ignored, otherwise it is added to the list. Later, a ftraced daemon wakes up and calls kstop_machine if any functions have been recorded, and changes the calls to the recorded functions to a simple nop. If no functions were recorded, the daemon goes back to sleep. The daemon wakes up once a second to see if it needs to update any newly recorded functions into nops. Usually it does not, but if a lot of code has been executed for the first time in the kernel, the ftraced daemon will call kstop_machine to update those into nops. The problem currently is that there's no way to stop the daemon from doing this, and it can cause unneeded latencies (800us which for some is bothersome). This patch adds a new file /debugfs/tracing/ftraced_enabled. If the daemon is active, reading this will return "enabled\n" and "disabled\n" when the daemon is not running. To disable the daemon, the user can echo "0" or "disable" into this file, and "1" or "enable" to re-enable the daemon. Since the daemon is used to convert the functions into nops to increase the performance of the system, I also added that anytime something is written into the ftraced_enabled file, kstop_machine will run if there are new functions that have been detected that need to be converted. This way the user can disable the daemon but still be able to control the conversion of the mcount calls to nops by simply, "echo 0 > /debugfs/tracing/ftraced_enabled" when they need to do more conversions. To see the number of converted functions: "cat /debugfs/tracing/dyn_ftrace_total_info" Signed-off-by: Steven Rostedt Signed-off-by: Ingo Molnar --- include/linux/ftrace.h | 6 ++ kernel/trace/ftrace.c | 157 ++++++++++++++++++++++++++++++++++--------------- 2 files changed, 116 insertions(+), 47 deletions(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index b482fe88bc04..623819433ed5 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -72,9 +72,15 @@ extern int ftrace_update_ftrace_func(ftrace_func_t func); extern void ftrace_caller(void); extern void ftrace_call(void); extern void mcount_call(void); + +void ftrace_disable_daemon(void); +void ftrace_enable_daemon(void); + #else # define ftrace_force_update() ({ 0; }) # define ftrace_set_filter(buf, len, reset) do { } while (0) +# define ftrace_disable_daemon() do { } while (0) +# define ftrace_enable_daemon() do { } while (0) #endif /* totally disable ftrace - can not re-enable after this */ diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 1843edc098a6..f762f5a2d331 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -151,8 +151,6 @@ static int __unregister_ftrace_function(struct ftrace_ops *ops) #ifdef CONFIG_DYNAMIC_FTRACE static struct task_struct *ftraced_task; -static DECLARE_WAIT_QUEUE_HEAD(ftraced_waiters); -static unsigned long ftraced_iteration_counter; enum { FTRACE_ENABLE_CALLS = (1 << 0), @@ -189,6 +187,7 @@ static struct ftrace_page *ftrace_pages; static int ftraced_trigger; static int ftraced_suspend; +static int ftraced_stop; static int ftrace_record_suspend; @@ -474,14 +473,21 @@ ftrace_code_disable(struct dyn_ftrace *rec) return 1; } +static int __ftrace_update_code(void *ignore); + static int __ftrace_modify_code(void *data) { unsigned long addr; int *command = data; - if (*command & FTRACE_ENABLE_CALLS) + if (*command & FTRACE_ENABLE_CALLS) { + /* + * Update any recorded ips now that we have the + * machine stopped + */ + __ftrace_update_code(NULL); ftrace_replace_code(1); - else if (*command & FTRACE_DISABLE_CALLS) + } else if (*command & FTRACE_DISABLE_CALLS) ftrace_replace_code(0); if (*command & FTRACE_UPDATE_TRACE_FUNC) @@ -503,6 +509,25 @@ static void ftrace_run_update_code(int command) stop_machine_run(__ftrace_modify_code, &command, NR_CPUS); } +void ftrace_disable_daemon(void) +{ + /* Stop the daemon from calling kstop_machine */ + mutex_lock(&ftraced_lock); + ftraced_stop = 1; + mutex_unlock(&ftraced_lock); + + ftrace_force_update(); +} + +void ftrace_enable_daemon(void) +{ + mutex_lock(&ftraced_lock); + ftraced_stop = 0; + mutex_unlock(&ftraced_lock); + + ftrace_force_update(); +} + static ftrace_func_t saved_ftrace_func; static void ftrace_startup(void) @@ -603,6 +628,7 @@ static int __ftrace_update_code(void *ignore) int i; /* Don't be recording funcs now */ + ftrace_record_suspend++; save_ftrace_enabled = ftrace_enabled; ftrace_enabled = 0; @@ -628,18 +654,23 @@ static int __ftrace_update_code(void *ignore) stop = ftrace_now(raw_smp_processor_id()); ftrace_update_time = stop - start; ftrace_update_tot_cnt += ftrace_update_cnt; + ftraced_trigger = 0; ftrace_enabled = save_ftrace_enabled; + ftrace_record_suspend--; return 0; } -static void ftrace_update_code(void) +static int ftrace_update_code(void) { - if (unlikely(ftrace_disabled)) - return; + if (unlikely(ftrace_disabled) || + !ftrace_enabled || !ftraced_trigger) + return 0; stop_machine_run(__ftrace_update_code, NULL, NR_CPUS); + + return 1; } static int ftraced(void *ignore) @@ -658,14 +689,13 @@ static int ftraced(void *ignore) mutex_lock(&ftrace_sysctl_lock); mutex_lock(&ftraced_lock); - if (ftrace_enabled && ftraced_trigger && !ftraced_suspend) { - ftrace_record_suspend++; - ftrace_update_code(); + if (!ftraced_suspend && !ftraced_stop && + ftrace_update_code()) { usecs = nsecs_to_usecs(ftrace_update_time); if (ftrace_update_tot_cnt > 100000) { ftrace_update_tot_cnt = 0; pr_info("hm, dftrace overflow: %lu change%s" - " (%lu total) in %lu usec%s\n", + " (%lu total) in %lu usec%s\n", ftrace_update_cnt, ftrace_update_cnt != 1 ? "s" : "", ftrace_update_tot_cnt, @@ -673,15 +703,10 @@ static int ftraced(void *ignore) ftrace_disabled = 1; WARN_ON_ONCE(1); } - ftraced_trigger = 0; - ftrace_record_suspend--; } - ftraced_iteration_counter++; mutex_unlock(&ftraced_lock); mutex_unlock(&ftrace_sysctl_lock); - wake_up_interruptible(&ftraced_waiters); - ftrace_shutdown_replenish(); } __set_current_state(TASK_RUNNING); @@ -1219,6 +1244,55 @@ ftrace_notrace_release(struct inode *inode, struct file *file) return ftrace_regex_release(inode, file, 0); } +static ssize_t +ftraced_read(struct file *filp, char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + /* don't worry about races */ + char *buf = ftraced_stop ? "disabled\n" : "enabled\n"; + int r = strlen(buf); + + return simple_read_from_buffer(ubuf, cnt, ppos, buf, r); +} + +static ssize_t +ftraced_write(struct file *filp, const char __user *ubuf, + size_t cnt, loff_t *ppos) +{ + char buf[64]; + long val; + int ret; + + if (cnt >= sizeof(buf)) + return -EINVAL; + + if (copy_from_user(&buf, ubuf, cnt)) + return -EFAULT; + + if (strncmp(buf, "enable", 6) == 0) + val = 1; + else if (strncmp(buf, "disable", 7) == 0) + val = 0; + else { + buf[cnt] = 0; + + ret = strict_strtoul(buf, 10, &val); + if (ret < 0) + return ret; + + val = !!val; + } + + if (val) + ftrace_enable_daemon(); + else + ftrace_disable_daemon(); + + filp->f_pos += cnt; + + return cnt; +} + static struct file_operations ftrace_avail_fops = { .open = ftrace_avail_open, .read = seq_read, @@ -1242,51 +1316,34 @@ static struct file_operations ftrace_notrace_fops = { .release = ftrace_notrace_release, }; +static struct file_operations ftraced_fops = { + .open = tracing_open_generic, + .read = ftraced_read, + .write = ftraced_write, +}; + /** * ftrace_force_update - force an update to all recording ftrace functions - * - * The ftrace dynamic update daemon only wakes up once a second. - * There may be cases where an update needs to be done immediately - * for tests or internal kernel tracing to begin. This function - * wakes the daemon to do an update and will not return until the - * update is complete. */ int ftrace_force_update(void) { - unsigned long last_counter; - DECLARE_WAITQUEUE(wait, current); int ret = 0; if (unlikely(ftrace_disabled)) return -ENODEV; + mutex_lock(&ftrace_sysctl_lock); mutex_lock(&ftraced_lock); - last_counter = ftraced_iteration_counter; - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&ftraced_waiters, &wait); - if (unlikely(!ftraced_task)) { - ret = -ENODEV; - goto out; - } - - do { - mutex_unlock(&ftraced_lock); - wake_up_process(ftraced_task); - schedule(); - mutex_lock(&ftraced_lock); - if (signal_pending(current)) { - ret = -EINTR; - break; - } - set_current_state(TASK_INTERRUPTIBLE); - } while (last_counter == ftraced_iteration_counter); + /* + * If ftraced_trigger is not set, then there is nothing + * to update. + */ + if (ftraced_trigger && !ftrace_update_code()) + ret = -EBUSY; - out: mutex_unlock(&ftraced_lock); - remove_wait_queue(&ftraced_waiters, &wait); - set_current_state(TASK_RUNNING); + mutex_unlock(&ftrace_sysctl_lock); return ret; } @@ -1331,6 +1388,12 @@ static __init int ftrace_init_debugfs(void) if (!entry) pr_warning("Could not create debugfs " "'set_ftrace_notrace' entry\n"); + + entry = debugfs_create_file("ftraced_enabled", 0644, d_tracer, + NULL, &ftraced_fops); + if (!entry) + pr_warning("Could not create debugfs " + "'ftraced_enabled' entry\n"); return 0; } -- cgit v1.2.3 From fb093eab6d8963a085f112773284f2bcb3d7907b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 27 May 2008 16:29:20 -0700 Subject: x86: remove duplicated e820 func in setup.h we already have them in e820.h Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/setup.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h index 64f5f0c11d66..9e163fc3e984 100644 --- a/include/asm-x86/setup.h +++ b/include/asm-x86/setup.h @@ -50,15 +50,9 @@ extern struct boot_params boot_params; */ #define LOWMEMSIZE() (0x9f000) -struct e820entry; - char * __init machine_specific_memory_setup(void); char *memory_setup(void); -int __init copy_e820_map(struct e820entry *biosmap, int nr_map); -void __init add_memory_region(unsigned long long start, - unsigned long long size, int type); - void __init i386_start_kernel(void); -- cgit v1.2.3 From 88ff0a474e98f869d8c321e29481f298320100d6 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Tue, 27 May 2008 18:49:39 -0700 Subject: x86: coding style fixes for nmi.c before total: 1 errors, 6 warnings, 534 lines checked after total: 0 errors, 1 warnings, 532 lines checked Signed-off-by: Hiroshi Shimamoto Signed-off-by: Ingo Molnar --- arch/x86/kernel/nmi.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index 3671a9f3564b..bf143f191fb1 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -23,9 +23,8 @@ #include #include #include +#include -#include -#include #include #include @@ -45,13 +44,16 @@ static cpumask_t backtrace_mask = CPU_MASK_NONE; * 0: the lapic NMI watchdog is disabled, but can be enabled */ atomic_t nmi_active = ATOMIC_INIT(0); /* oprofile uses this */ -static int panic_on_timeout; +EXPORT_SYMBOL(nmi_active); unsigned int nmi_watchdog = NMI_DEFAULT; +EXPORT_SYMBOL(nmi_watchdog); + +static int panic_on_timeout; static unsigned int nmi_hz = HZ; static DEFINE_PER_CPU(short, wd_enabled); -static int endflag __initdata = 0; +static int endflag __initdata; static inline unsigned int get_nmi_count(int cpu) { @@ -404,7 +406,7 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) static DEFINE_SPINLOCK(lock); /* Serialise the printks */ spin_lock(&lock); - printk("NMI backtrace for cpu %d\n", cpu); + printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu); dump_stack(); spin_unlock(&lock); cpu_clear(cpu, backtrace_mask); @@ -529,7 +531,3 @@ void __trigger_all_cpu_backtrace(void) mdelay(1); } } - -EXPORT_SYMBOL(nmi_active); -EXPORT_SYMBOL(nmi_watchdog); - -- cgit v1.2.3 From 9f5314fb4d556d3132c784d0df47352b2830ca53 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Wed, 28 May 2008 09:51:18 -0500 Subject: x86, uv: update macros used by UV platform Update the UV address macros to better describe the fields of UV physical addresses. Improve comments in the header files. Add additional MMR definitions. Signed-off-by: Jack Steiner Signed-off-by: Ingo Molnar --- arch/x86/kernel/genx2apic_uv_x.c | 141 +++++++---- include/asm-x86/uv/uv_hub.h | 188 ++++++++++----- include/asm-x86/uv/uv_mmrs.h | 509 ++++++++++++++++++++++++++++++++++++++- 3 files changed, 731 insertions(+), 107 deletions(-) diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c index ebf13908a743..45e84acca8a9 100644 --- a/arch/x86/kernel/genx2apic_uv_x.c +++ b/arch/x86/kernel/genx2apic_uv_x.c @@ -5,7 +5,7 @@ * * SGI UV APIC functions (note: not an Intel compatible APIC) * - * Copyright (C) 2007 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved. */ #include @@ -55,37 +55,37 @@ static cpumask_t uv_vector_allocation_domain(int cpu) int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip) { unsigned long val; - int nasid; + int pnode; - nasid = uv_apicid_to_nasid(phys_apicid); + pnode = uv_apicid_to_pnode(phys_apicid); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) | (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) | APIC_DM_INIT; - uv_write_global_mmr64(nasid, UVH_IPI_INT, val); + uv_write_global_mmr64(pnode, UVH_IPI_INT, val); mdelay(10); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) | (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) | APIC_DM_STARTUP; - uv_write_global_mmr64(nasid, UVH_IPI_INT, val); + uv_write_global_mmr64(pnode, UVH_IPI_INT, val); return 0; } static void uv_send_IPI_one(int cpu, int vector) { unsigned long val, apicid, lapicid; - int nasid; + int pnode; apicid = per_cpu(x86_cpu_to_apicid, cpu); /* ZZZ - cache node-local ? */ lapicid = apicid & 0x3f; /* ZZZ macro needed */ - nasid = uv_apicid_to_nasid(apicid); + pnode = uv_apicid_to_pnode(apicid); val = (1UL << UVH_IPI_INT_SEND_SHFT) | (lapicid << UVH_IPI_INT_APIC_ID_SHFT) | (vector << UVH_IPI_INT_VECTOR_SHFT); - uv_write_global_mmr64(nasid, UVH_IPI_INT, val); + uv_write_global_mmr64(pnode, UVH_IPI_INT, val); } static void uv_send_IPI_mask(cpumask_t mask, int vector) @@ -159,39 +159,81 @@ struct genapic apic_x2apic_uv_x = { .phys_pkg_id = phys_pkg_id, /* Fixme ZZZ */ }; -static __cpuinit void set_x2apic_extra_bits(int nasid) +static __cpuinit void set_x2apic_extra_bits(int pnode) { - __get_cpu_var(x2apic_extra_bits) = ((nasid >> 1) << 6); + __get_cpu_var(x2apic_extra_bits) = (pnode << 6); } /* * Called on boot cpu. */ +static __init int boot_pnode_to_blade(int pnode) +{ + int blade; + + for (blade = 0; blade < uv_num_possible_blades(); blade++) + if (pnode == uv_blade_info[blade].pnode) + return blade; + BUG(); +} + +struct redir_addr { + unsigned long redirect; + unsigned long alias; +}; + +#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT + +static __initdata struct redir_addr redir_addrs[] = { + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG}, + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG}, + {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG}, +}; + +static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size) +{ + union uvh_si_alias0_overlay_config_u alias; + union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect; + int i; + + for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) { + alias.v = uv_read_local_mmr(redir_addrs[i].alias); + if (alias.s.base == 0) { + *size = (1UL << alias.s.m_alias); + redirect.v = uv_read_local_mmr(redir_addrs[i].redirect); + *base = (unsigned long)redirect.s.dest_base << DEST_SHIFT; + return; + } + } + BUG(); +} + static __init void uv_system_init(void) { union uvh_si_addr_map_config_u m_n_config; - int bytes, nid, cpu, lcpu, nasid, last_nasid, blade; - unsigned long mmr_base; + union uvh_node_id_u node_id; + unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size; + int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val; + unsigned long mmr_base, present; m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG); + m_val = m_n_config.s.m_skt; + n_val = m_n_config.s.n_skt; mmr_base = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) & ~UV_MMR_ENABLE; printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base); - last_nasid = -1; - for_each_possible_cpu(cpu) { - nid = cpu_to_node(cpu); - nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu)); - if (nasid != last_nasid) - uv_possible_blades++; - last_nasid = nasid; - } + for(i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++) + uv_possible_blades += + hweight64(uv_read_local_mmr( UVH_NODE_PRESENT_TABLE + i * 8)); printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades()); bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades(); uv_blade_info = alloc_bootmem_pages(bytes); + get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size); + bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes(); uv_node_to_blade = alloc_bootmem_pages(bytes); memset(uv_node_to_blade, 255, bytes); @@ -200,43 +242,56 @@ static __init void uv_system_init(void) uv_cpu_to_blade = alloc_bootmem_pages(bytes); memset(uv_cpu_to_blade, 255, bytes); - last_nasid = -1; - blade = -1; - lcpu = -1; - for_each_possible_cpu(cpu) { - nid = cpu_to_node(cpu); - nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu)); - if (nasid != last_nasid) { - blade++; - lcpu = -1; - uv_blade_info[blade].nr_posible_cpus = 0; + blade = 0; + for (i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++) { + present = uv_read_local_mmr(UVH_NODE_PRESENT_TABLE + i * 8); + for (j = 0; j < 64; j++) { + if (!test_bit(j, &present)) + continue; + uv_blade_info[blade].pnode = (i * 64 + j); + uv_blade_info[blade].nr_possible_cpus = 0; uv_blade_info[blade].nr_online_cpus = 0; + blade++; } - last_nasid = nasid; - lcpu++; + } - uv_cpu_hub_info(cpu)->m_val = m_n_config.s.m_skt; - uv_cpu_hub_info(cpu)->n_val = m_n_config.s.n_skt; + node_id.v = uv_read_local_mmr(UVH_NODE_ID); + gnode_upper = (((unsigned long)node_id.s.node_id) & + ~((1 << n_val) - 1)) << m_val; + + for_each_present_cpu(cpu) { + nid = cpu_to_node(cpu); + pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu)); + blade = boot_pnode_to_blade(pnode); + lcpu = uv_blade_info[blade].nr_possible_cpus; + uv_blade_info[blade].nr_possible_cpus++; + + uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base; + uv_cpu_hub_info(cpu)->lowmem_remap_top = + lowmem_redir_base + lowmem_redir_size; + uv_cpu_hub_info(cpu)->m_val = m_val; + uv_cpu_hub_info(cpu)->n_val = m_val; uv_cpu_hub_info(cpu)->numa_blade_id = blade; uv_cpu_hub_info(cpu)->blade_processor_id = lcpu; - uv_cpu_hub_info(cpu)->local_nasid = nasid; - uv_cpu_hub_info(cpu)->gnode_upper = - nasid & ~((1 << uv_hub_info->n_val) - 1); + uv_cpu_hub_info(cpu)->pnode = pnode; + uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1; + uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1; + uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper; uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base; uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */ - uv_blade_info[blade].nasid = nasid; - uv_blade_info[blade].nr_posible_cpus++; uv_node_to_blade[nid] = blade; uv_cpu_to_blade[cpu] = blade; - printk(KERN_DEBUG "UV cpu %d, apicid 0x%x, nasid %d, nid %d\n", - cpu, per_cpu(x86_cpu_to_apicid, cpu), nasid, nid); - printk(KERN_DEBUG "UV lcpu %d, blade %d\n", lcpu, blade); + printk(KERN_DEBUG "UV cpu %d, apicid 0x%x, pnode %d, nid %d, " + "lcpu %d, blade %d\n", + cpu, per_cpu(x86_cpu_to_apicid, cpu), pnode, nid, + lcpu, blade); } } /* * Called on each cpu to initialize the per_cpu UV data area. + * ZZZ hotplug not supported yet */ void __cpuinit uv_cpu_init(void) { @@ -246,5 +301,5 @@ void __cpuinit uv_cpu_init(void) uv_blade_info[uv_numa_blade_id()].nr_online_cpus++; if (get_uv_system_type() == UV_NON_UNIQUE_APIC) - set_x2apic_extra_bits(uv_hub_info->local_nasid); + set_x2apic_extra_bits(uv_hub_info->pnode); } diff --git a/include/asm-x86/uv/uv_hub.h b/include/asm-x86/uv/uv_hub.h index 26b9240d1e23..65004881de5f 100644 --- a/include/asm-x86/uv/uv_hub.h +++ b/include/asm-x86/uv/uv_hub.h @@ -5,7 +5,7 @@ * * SGI UV architectural definitions * - * Copyright (C) 2007 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved. */ #ifndef __ASM_X86_UV_HUB_H__ @@ -20,26 +20,49 @@ /* * Addressing Terminology * - * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of - * routers always have low bit of 1, C/MBricks have low bit - * equal to 0. Most addressing macros that target UV hub chips - * right shift the NASID by 1 to exclude the always-zero bit. + * M - The low M bits of a physical address represent the offset + * into the blade local memory. RAM memory on a blade is physically + * contiguous (although various IO spaces may punch holes in + * it).. * - * SNASID - NASID right shifted by 1 bit. + * N - Number of bits in the node portion of a socket physical + * address. + * + * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of + * routers always have low bit of 1, C/MBricks have low bit + * equal to 0. Most addressing macros that target UV hub chips + * right shift the NASID by 1 to exclude the always-zero bit. + * NASIDs contain up to 15 bits. + * + * GNODE - NASID right shifted by 1 bit. Most mmrs contain gnodes instead + * of nasids. + * + * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant + * of the nasid for socket usage. + * + * + * NumaLink Global Physical Address Format: + * +--------------------------------+---------------------+ + * |00..000| GNODE | NodeOffset | + * +--------------------------------+---------------------+ + * |<-------53 - M bits --->|<--------M bits -----> + * + * M - number of node offset bits (35 .. 40) * * * Memory/UV-HUB Processor Socket Address Format: - * +--------+---------------+---------------------+ - * |00..0000| SNASID | NodeOffset | - * +--------+---------------+---------------------+ - * <--- N bits --->|<--------M bits -----> + * +----------------+---------------+---------------------+ + * |00..000000000000| PNODE | NodeOffset | + * +----------------+---------------+---------------------+ + * <--- N bits --->|<--------M bits -----> * - * M number of node offset bits (35 .. 40) - * N number of SNASID bits (0 .. 10) + * M - number of node offset bits (35 .. 40) + * N - number of PNODE bits (0 .. 10) * * Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64). * The actual values are configuration dependent and are set at - * boot time + * boot time. M & N values are set by the hardware/BIOS at boot. + * * * APICID format * NOTE!!!!!! This is the current format of the APICID. However, code @@ -48,14 +71,14 @@ * * 1111110000000000 * 5432109876543210 - * nnnnnnnnnnlc0cch + * pppppppppplc0cch * sssssssssss * - * n = snasid bits + * p = pnode bits * l = socket number on board * c = core * h = hyperthread - * s = bits that are in the socket CSR + * s = bits that are in the SOCKET_ID CSR * * Note: Processor only supports 12 bits in the APICID register. The ACPI * tables hold all 16 bits. Software needs to be aware of this. @@ -74,7 +97,7 @@ * This value is also the value of the maximum number of non-router NASIDs * in the numalink fabric. * - * NOTE: a brick may be 1 or 2 OS nodes. Don't get these confused. + * NOTE: a brick may contain 1 or 2 OS nodes. Don't get these confused. */ #define UV_MAX_NUMALINK_BLADES 16384 @@ -96,8 +119,12 @@ */ struct uv_hub_info_s { unsigned long global_mmr_base; - unsigned short local_nasid; - unsigned short gnode_upper; + unsigned long gpa_mask; + unsigned long gnode_upper; + unsigned long lowmem_remap_top; + unsigned long lowmem_remap_base; + unsigned short pnode; + unsigned short pnode_mask; unsigned short coherency_domain_number; unsigned short numa_blade_id; unsigned char blade_processor_id; @@ -112,83 +139,124 @@ DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); * Local & Global MMR space macros. * Note: macros are intended to be used ONLY by inline functions * in this file - not by other kernel code. + * n - NASID (full 15-bit global nasid) + * g - GNODE (full 15-bit global nasid, right shifted 1) + * p - PNODE (local part of nsids, right shifted 1) */ -#define UV_SNASID(n) ((n) >> 1) -#define UV_NASID(n) ((n) << 1) +#define UV_NASID_TO_PNODE(n) (((n) >> 1) & uv_hub_info->pnode_mask) +#define UV_PNODE_TO_NASID(p) (((p) << 1) | uv_hub_info->gnode_upper) #define UV_LOCAL_MMR_BASE 0xf4000000UL #define UV_GLOBAL_MMR32_BASE 0xf8000000UL #define UV_GLOBAL_MMR64_BASE (uv_hub_info->global_mmr_base) -#define UV_GLOBAL_MMR32_SNASID_MASK 0x3ff -#define UV_GLOBAL_MMR32_SNASID_SHIFT 15 -#define UV_GLOBAL_MMR64_SNASID_SHIFT 26 +#define UV_GLOBAL_MMR32_PNODE_SHIFT 15 +#define UV_GLOBAL_MMR64_PNODE_SHIFT 26 -#define UV_GLOBAL_MMR32_NASID_BITS(n) \ - (((UV_SNASID(n) & UV_GLOBAL_MMR32_SNASID_MASK)) << \ - (UV_GLOBAL_MMR32_SNASID_SHIFT)) +#define UV_GLOBAL_MMR32_PNODE_BITS(p) ((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT)) -#define UV_GLOBAL_MMR64_NASID_BITS(n) \ - ((unsigned long)UV_SNASID(n) << UV_GLOBAL_MMR64_SNASID_SHIFT) +#define UV_GLOBAL_MMR64_PNODE_BITS(p) \ + ((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT) + +#define UV_APIC_PNODE_SHIFT 6 + +/* + * Macros for converting between kernel virtual addresses, socket local physical + * addresses, and UV global physical addresses. + * Note: use the standard __pa() & __va() macros for converting + * between socket virtual and socket physical addresses. + */ + +/* socket phys RAM --> UV global physical address */ +static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr) +{ + if (paddr < uv_hub_info->lowmem_remap_top) + paddr += uv_hub_info->lowmem_remap_base; + return paddr | uv_hub_info->gnode_upper; +} + + +/* socket virtual --> UV global physical address */ +static inline unsigned long uv_gpa(void *v) +{ + return __pa(v) | uv_hub_info->gnode_upper; +} + +/* socket virtual --> UV global physical address */ +static inline void *uv_vgpa(void *v) +{ + return (void *)uv_gpa(v); +} + +/* UV global physical address --> socket virtual */ +static inline void *uv_va(unsigned long gpa) +{ + return __va(gpa & uv_hub_info->gpa_mask); +} + +/* pnode, offset --> socket virtual */ +static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset) +{ + return __va(((unsigned long)pnode << uv_hub_info->m_val) | offset); +} -#define UV_APIC_NASID_SHIFT 6 /* - * Extract a NASID from an APICID (full apicid, not processor subset) + * Extract a PNODE from an APICID (full apicid, not processor subset) */ -static inline int uv_apicid_to_nasid(int apicid) +static inline int uv_apicid_to_pnode(int apicid) { - return (UV_NASID(apicid >> UV_APIC_NASID_SHIFT)); + return (apicid >> UV_APIC_PNODE_SHIFT); } /* * Access global MMRs using the low memory MMR32 space. This region supports * faster MMR access but not all MMRs are accessible in this space. */ -static inline unsigned long *uv_global_mmr32_address(int nasid, +static inline unsigned long *uv_global_mmr32_address(int pnode, unsigned long offset) { return __va(UV_GLOBAL_MMR32_BASE | - UV_GLOBAL_MMR32_NASID_BITS(nasid) | offset); + UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset); } -static inline void uv_write_global_mmr32(int nasid, unsigned long offset, +static inline void uv_write_global_mmr32(int pnode, unsigned long offset, unsigned long val) { - *uv_global_mmr32_address(nasid, offset) = val; + *uv_global_mmr32_address(pnode, offset) = val; } -static inline unsigned long uv_read_global_mmr32(int nasid, +static inline unsigned long uv_read_global_mmr32(int pnode, unsigned long offset) { - return *uv_global_mmr32_address(nasid, offset); + return *uv_global_mmr32_address(pnode, offset); } /* * Access Global MMR space using the MMR space located at the top of physical * memory. */ -static inline unsigned long *uv_global_mmr64_address(int nasid, +static inline unsigned long *uv_global_mmr64_address(int pnode, unsigned long offset) { return __va(UV_GLOBAL_MMR64_BASE | - UV_GLOBAL_MMR64_NASID_BITS(nasid) | offset); + UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset); } -static inline void uv_write_global_mmr64(int nasid, unsigned long offset, +static inline void uv_write_global_mmr64(int pnode, unsigned long offset, unsigned long val) { - *uv_global_mmr64_address(nasid, offset) = val; + *uv_global_mmr64_address(pnode, offset) = val; } -static inline unsigned long uv_read_global_mmr64(int nasid, +static inline unsigned long uv_read_global_mmr64(int pnode, unsigned long offset) { - return *uv_global_mmr64_address(nasid, offset); + return *uv_global_mmr64_address(pnode, offset); } /* - * Access node local MMRs. Faster than using global space but only local MMRs + * Access hub local MMRs. Faster than using global space but only local MMRs * are accessible. */ static inline unsigned long *uv_local_mmr_address(unsigned long offset) @@ -207,15 +275,15 @@ static inline void uv_write_local_mmr(unsigned long offset, unsigned long val) } /* - * Structures and definitions for converting between cpu, node, and blade + * Structures and definitions for converting between cpu, node, pnode, and blade * numbers. */ struct uv_blade_info { - unsigned short nr_posible_cpus; + unsigned short nr_possible_cpus; unsigned short nr_online_cpus; - unsigned short nasid; + unsigned short pnode; }; -struct uv_blade_info *uv_blade_info; +extern struct uv_blade_info *uv_blade_info; extern short *uv_node_to_blade; extern short *uv_cpu_to_blade; extern short uv_possible_blades; @@ -244,16 +312,16 @@ static inline int uv_node_to_blade_id(int nid) return uv_node_to_blade[nid]; } -/* Convert a blade id to the NASID of the blade */ -static inline int uv_blade_to_nasid(int bid) +/* Convert a blade id to the PNODE of the blade */ +static inline int uv_blade_to_pnode(int bid) { - return uv_blade_info[bid].nasid; + return uv_blade_info[bid].pnode; } /* Determine the number of possible cpus on a blade */ static inline int uv_blade_nr_possible_cpus(int bid) { - return uv_blade_info[bid].nr_posible_cpus; + return uv_blade_info[bid].nr_possible_cpus; } /* Determine the number of online cpus on a blade */ @@ -262,16 +330,16 @@ static inline int uv_blade_nr_online_cpus(int bid) return uv_blade_info[bid].nr_online_cpus; } -/* Convert a cpu id to the NASID of the blade containing the cpu */ -static inline int uv_cpu_to_nasid(int cpu) +/* Convert a cpu id to the PNODE of the blade containing the cpu */ +static inline int uv_cpu_to_pnode(int cpu) { - return uv_blade_info[uv_cpu_to_blade_id(cpu)].nasid; + return uv_blade_info[uv_cpu_to_blade_id(cpu)].pnode; } -/* Convert a node number to the NASID of the blade */ -static inline int uv_node_to_nasid(int nid) +/* Convert a linux node number to the PNODE of the blade */ +static inline int uv_node_to_pnode(int nid) { - return uv_blade_info[uv_node_to_blade_id(nid)].nasid; + return uv_blade_info[uv_node_to_blade_id(nid)].pnode; } /* Maximum possible number of blades */ diff --git a/include/asm-x86/uv/uv_mmrs.h b/include/asm-x86/uv/uv_mmrs.h index 3b69fe6b6376..ac9846076521 100644 --- a/include/asm-x86/uv/uv_mmrs.h +++ b/include/asm-x86/uv/uv_mmrs.h @@ -11,11 +11,46 @@ #ifndef __ASM_X86_UV_MMRS__ #define __ASM_X86_UV_MMRS__ -/* - * AUTO GENERATED - Do not edit - */ +#define UV_MMR_ENABLE (1UL << 63) - #define UV_MMR_ENABLE (1UL << 63) +/* ========================================================================= */ +/* UVH_BAU_DATA_CONFIG */ +/* ========================================================================= */ +#define UVH_BAU_DATA_CONFIG 0x61680UL +#define UVH_BAU_DATA_CONFIG_32 0x0450 + +#define UVH_BAU_DATA_CONFIG_VECTOR_SHFT 0 +#define UVH_BAU_DATA_CONFIG_VECTOR_MASK 0x00000000000000ffUL +#define UVH_BAU_DATA_CONFIG_DM_SHFT 8 +#define UVH_BAU_DATA_CONFIG_DM_MASK 0x0000000000000700UL +#define UVH_BAU_DATA_CONFIG_DESTMODE_SHFT 11 +#define UVH_BAU_DATA_CONFIG_DESTMODE_MASK 0x0000000000000800UL +#define UVH_BAU_DATA_CONFIG_STATUS_SHFT 12 +#define UVH_BAU_DATA_CONFIG_STATUS_MASK 0x0000000000001000UL +#define UVH_BAU_DATA_CONFIG_P_SHFT 13 +#define UVH_BAU_DATA_CONFIG_P_MASK 0x0000000000002000UL +#define UVH_BAU_DATA_CONFIG_T_SHFT 15 +#define UVH_BAU_DATA_CONFIG_T_MASK 0x0000000000008000UL +#define UVH_BAU_DATA_CONFIG_M_SHFT 16 +#define UVH_BAU_DATA_CONFIG_M_MASK 0x0000000000010000UL +#define UVH_BAU_DATA_CONFIG_APIC_ID_SHFT 32 +#define UVH_BAU_DATA_CONFIG_APIC_ID_MASK 0xffffffff00000000UL + +union uvh_bau_data_config_u { + unsigned long v; + struct uvh_bau_data_config_s { + unsigned long vector_ : 8; /* RW */ + unsigned long dm : 3; /* RW */ + unsigned long destmode : 1; /* RW */ + unsigned long status : 1; /* RO */ + unsigned long p : 1; /* RO */ + unsigned long rsvd_14 : 1; /* */ + unsigned long t : 1; /* RO */ + unsigned long m : 1; /* RW */ + unsigned long rsvd_17_31: 15; /* */ + unsigned long apic_id : 32; /* RW */ + } s; +}; /* ========================================================================= */ /* UVH_IPI_INT */ @@ -109,6 +144,7 @@ union uvh_lb_bau_intd_payload_queue_tail_u { /* UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE */ /* ========================================================================= */ #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE 0x320080UL +#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_32 0x0aa0 #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_SHFT 0 #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_MASK 0x0000000000000001UL @@ -169,6 +205,7 @@ union uvh_lb_bau_intd_software_acknowledge_u { /* UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS */ /* ========================================================================= */ #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS 0x0000000000320088UL +#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS_32 0x0aa8 /* ========================================================================= */ /* UVH_LB_BAU_SB_ACTIVATION_CONTROL */ @@ -247,6 +284,331 @@ union uvh_lb_bau_sb_descriptor_base_u { } s; }; +/* ========================================================================= */ +/* UVH_LB_MCAST_AOERR0_RPT_ENABLE */ +/* ========================================================================= */ +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE 0x50b20UL + +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_SHFT 0 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_OBESE_MSG_MASK 0x0000000000000001UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_SHFT 1 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_DATA_SB_ERR_MASK 0x0000000000000002UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_SHFT 2 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_NACK_BUFF_PARITY_MASK 0x0000000000000004UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_SHFT 3 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_TIMEOUT_MASK 0x0000000000000008UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_SHFT 4 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_INACTIVE_REPLY_MASK 0x0000000000000010UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_SHFT 5 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_UPGRADE_ERROR_MASK 0x0000000000000020UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_SHFT 6 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REG_COUNT_UNDERFLOW_MASK 0x0000000000000040UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_SHFT 7 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MCAST_REP_OBESE_MSG_MASK 0x0000000000000080UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_SHFT 8 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_RUNT_MSG_MASK 0x0000000000000100UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_SHFT 9 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_OBESE_MSG_MASK 0x0000000000000200UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_SHFT 10 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REQ_DATA_SB_ERR_MASK 0x0000000000000400UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_SHFT 11 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_RUNT_MSG_MASK 0x0000000000000800UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_SHFT 12 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_OBESE_MSG_MASK 0x0000000000001000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_SHFT 13 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_DATA_SB_ERR_MASK 0x0000000000002000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_SHFT 14 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_REP_COMMAND_ERR_MASK 0x0000000000004000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_SHFT 15 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_UCACHE_PEND_TIMEOUT_MASK 0x0000000000008000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_SHFT 16 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_RUNT_MSG_MASK 0x0000000000010000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_SHFT 17 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_OBESE_MSG_MASK 0x0000000000020000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_SHFT 18 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REQ_DATA_SB_ERR_MASK 0x0000000000040000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_SHFT 19 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_RUNT_MSG_MASK 0x0000000000080000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_SHFT 20 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_OBESE_MSG_MASK 0x0000000000100000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_SHFT 21 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_REP_DATA_SB_ERR_MASK 0x0000000000200000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_TIMEOUT_SHFT 22 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_TIMEOUT_MASK 0x0000000000400000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_SHFT 23 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_MACC_SPURIOUS_EVENT_MASK 0x0000000000800000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_SHFT 24 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IOH_DESTINATION_TABLE_PARITY_MASK 0x0000000001000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_SHFT 25 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_HAD_ERROR_REPLY_MASK 0x0000000002000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_SHFT 26 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_GET_TIMEOUT_MASK 0x0000000004000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_SHFT 27 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_LOCK_MANAGER_HAD_ERROR_REPLY_MASK 0x0000000008000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_SHFT 28 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_HAD_ERROR_REPLY_MASK 0x0000000010000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_SHFT 29 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_PUT_TIMEOUT_MASK 0x0000000020000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_SHFT 30 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SB_ACTIVATION_OVERRUN_MASK 0x0000000040000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_SHFT 31 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_HAD_ERROR_REPLY_MASK 0x0000000080000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_SHFT 32 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_COMPLETED_GB_ACTIVATION_TIMEOUT_MASK 0x0000000100000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_SHFT 33 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_0_PARITY_MASK 0x0000000200000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_SHFT 34 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_DESCRIPTOR_BUFFER_1_PARITY_MASK 0x0000000400000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_SHFT 35 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_SOCKET_DESTINATION_TABLE_PARITY_MASK 0x0000000800000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_SHFT 36 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_BAU_REPLY_PAYLOAD_CORRUPTION_MASK 0x0000001000000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_SHFT 37 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_IO_PORT_DESTINATION_TABLE_PARITY_MASK 0x0000002000000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_SHFT 38 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INTD_SOFT_ACK_TIMEOUT_MASK 0x0000004000000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_SHFT 39 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_OBESE_MSG_MASK 0x0000008000000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_SHFT 40 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_REP_COMMAND_ERR_MASK 0x0000010000000000UL +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_SHFT 41 +#define UVH_LB_MCAST_AOERR0_RPT_ENABLE_INT_TIMEOUT_MASK 0x0000020000000000UL + +union uvh_lb_mcast_aoerr0_rpt_enable_u { + unsigned long v; + struct uvh_lb_mcast_aoerr0_rpt_enable_s { + unsigned long mcast_obese_msg : 1; /* RW */ + unsigned long mcast_data_sb_err : 1; /* RW */ + unsigned long mcast_nack_buff_parity : 1; /* RW */ + unsigned long mcast_timeout : 1; /* RW */ + unsigned long mcast_inactive_reply : 1; /* RW */ + unsigned long mcast_upgrade_error : 1; /* RW */ + unsigned long mcast_reg_count_underflow : 1; /* RW */ + unsigned long mcast_rep_obese_msg : 1; /* RW */ + unsigned long ucache_req_runt_msg : 1; /* RW */ + unsigned long ucache_req_obese_msg : 1; /* RW */ + unsigned long ucache_req_data_sb_err : 1; /* RW */ + unsigned long ucache_rep_runt_msg : 1; /* RW */ + unsigned long ucache_rep_obese_msg : 1; /* RW */ + unsigned long ucache_rep_data_sb_err : 1; /* RW */ + unsigned long ucache_rep_command_err : 1; /* RW */ + unsigned long ucache_pend_timeout : 1; /* RW */ + unsigned long macc_req_runt_msg : 1; /* RW */ + unsigned long macc_req_obese_msg : 1; /* RW */ + unsigned long macc_req_data_sb_err : 1; /* RW */ + unsigned long macc_rep_runt_msg : 1; /* RW */ + unsigned long macc_rep_obese_msg : 1; /* RW */ + unsigned long macc_rep_data_sb_err : 1; /* RW */ + unsigned long macc_timeout : 1; /* RW */ + unsigned long macc_spurious_event : 1; /* RW */ + unsigned long ioh_destination_table_parity : 1; /* RW */ + unsigned long get_had_error_reply : 1; /* RW */ + unsigned long get_timeout : 1; /* RW */ + unsigned long lock_manager_had_error_reply : 1; /* RW */ + unsigned long put_had_error_reply : 1; /* RW */ + unsigned long put_timeout : 1; /* RW */ + unsigned long sb_activation_overrun : 1; /* RW */ + unsigned long completed_gb_activation_had_error_reply : 1; /* RW */ + unsigned long completed_gb_activation_timeout : 1; /* RW */ + unsigned long descriptor_buffer_0_parity : 1; /* RW */ + unsigned long descriptor_buffer_1_parity : 1; /* RW */ + unsigned long socket_destination_table_parity : 1; /* RW */ + unsigned long bau_reply_payload_corruption : 1; /* RW */ + unsigned long io_port_destination_table_parity : 1; /* RW */ + unsigned long intd_soft_ack_timeout : 1; /* RW */ + unsigned long int_rep_obese_msg : 1; /* RW */ + unsigned long int_rep_command_err : 1; /* RW */ + unsigned long int_timeout : 1; /* RW */ + unsigned long rsvd_42_63 : 22; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_LOCAL_INT0_CONFIG */ +/* ========================================================================= */ +#define UVH_LOCAL_INT0_CONFIG 0x61000UL + +#define UVH_LOCAL_INT0_CONFIG_VECTOR_SHFT 0 +#define UVH_LOCAL_INT0_CONFIG_VECTOR_MASK 0x00000000000000ffUL +#define UVH_LOCAL_INT0_CONFIG_DM_SHFT 8 +#define UVH_LOCAL_INT0_CONFIG_DM_MASK 0x0000000000000700UL +#define UVH_LOCAL_INT0_CONFIG_DESTMODE_SHFT 11 +#define UVH_LOCAL_INT0_CONFIG_DESTMODE_MASK 0x0000000000000800UL +#define UVH_LOCAL_INT0_CONFIG_STATUS_SHFT 12 +#define UVH_LOCAL_INT0_CONFIG_STATUS_MASK 0x0000000000001000UL +#define UVH_LOCAL_INT0_CONFIG_P_SHFT 13 +#define UVH_LOCAL_INT0_CONFIG_P_MASK 0x0000000000002000UL +#define UVH_LOCAL_INT0_CONFIG_T_SHFT 15 +#define UVH_LOCAL_INT0_CONFIG_T_MASK 0x0000000000008000UL +#define UVH_LOCAL_INT0_CONFIG_M_SHFT 16 +#define UVH_LOCAL_INT0_CONFIG_M_MASK 0x0000000000010000UL +#define UVH_LOCAL_INT0_CONFIG_APIC_ID_SHFT 32 +#define UVH_LOCAL_INT0_CONFIG_APIC_ID_MASK 0xffffffff00000000UL + +union uvh_local_int0_config_u { + unsigned long v; + struct uvh_local_int0_config_s { + unsigned long vector_ : 8; /* RW */ + unsigned long dm : 3; /* RW */ + unsigned long destmode : 1; /* RW */ + unsigned long status : 1; /* RO */ + unsigned long p : 1; /* RO */ + unsigned long rsvd_14 : 1; /* */ + unsigned long t : 1; /* RO */ + unsigned long m : 1; /* RW */ + unsigned long rsvd_17_31: 15; /* */ + unsigned long apic_id : 32; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_LOCAL_INT0_ENABLE */ +/* ========================================================================= */ +#define UVH_LOCAL_INT0_ENABLE 0x65000UL + +#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_SHFT 0 +#define UVH_LOCAL_INT0_ENABLE_LB_HCERR_MASK 0x0000000000000001UL +#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_SHFT 1 +#define UVH_LOCAL_INT0_ENABLE_GR0_HCERR_MASK 0x0000000000000002UL +#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_SHFT 2 +#define UVH_LOCAL_INT0_ENABLE_GR1_HCERR_MASK 0x0000000000000004UL +#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_SHFT 3 +#define UVH_LOCAL_INT0_ENABLE_LH_HCERR_MASK 0x0000000000000008UL +#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_SHFT 4 +#define UVH_LOCAL_INT0_ENABLE_RH_HCERR_MASK 0x0000000000000010UL +#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_SHFT 5 +#define UVH_LOCAL_INT0_ENABLE_XN_HCERR_MASK 0x0000000000000020UL +#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_SHFT 6 +#define UVH_LOCAL_INT0_ENABLE_SI_HCERR_MASK 0x0000000000000040UL +#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_SHFT 7 +#define UVH_LOCAL_INT0_ENABLE_LB_AOERR0_MASK 0x0000000000000080UL +#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_SHFT 8 +#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR0_MASK 0x0000000000000100UL +#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_SHFT 9 +#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR0_MASK 0x0000000000000200UL +#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_SHFT 10 +#define UVH_LOCAL_INT0_ENABLE_LH_AOERR0_MASK 0x0000000000000400UL +#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_SHFT 11 +#define UVH_LOCAL_INT0_ENABLE_RH_AOERR0_MASK 0x0000000000000800UL +#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_SHFT 12 +#define UVH_LOCAL_INT0_ENABLE_XN_AOERR0_MASK 0x0000000000001000UL +#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_SHFT 13 +#define UVH_LOCAL_INT0_ENABLE_SI_AOERR0_MASK 0x0000000000002000UL +#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_SHFT 14 +#define UVH_LOCAL_INT0_ENABLE_LB_AOERR1_MASK 0x0000000000004000UL +#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_SHFT 15 +#define UVH_LOCAL_INT0_ENABLE_GR0_AOERR1_MASK 0x0000000000008000UL +#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_SHFT 16 +#define UVH_LOCAL_INT0_ENABLE_GR1_AOERR1_MASK 0x0000000000010000UL +#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_SHFT 17 +#define UVH_LOCAL_INT0_ENABLE_LH_AOERR1_MASK 0x0000000000020000UL +#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_SHFT 18 +#define UVH_LOCAL_INT0_ENABLE_RH_AOERR1_MASK 0x0000000000040000UL +#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_SHFT 19 +#define UVH_LOCAL_INT0_ENABLE_XN_AOERR1_MASK 0x0000000000080000UL +#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_SHFT 20 +#define UVH_LOCAL_INT0_ENABLE_SI_AOERR1_MASK 0x0000000000100000UL +#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_SHFT 21 +#define UVH_LOCAL_INT0_ENABLE_RH_VPI_INT_MASK 0x0000000000200000UL +#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_SHFT 22 +#define UVH_LOCAL_INT0_ENABLE_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_SHFT 23 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_0_MASK 0x0000000000800000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_SHFT 24 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_1_MASK 0x0000000001000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_SHFT 25 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_2_MASK 0x0000000002000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_SHFT 26 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_3_MASK 0x0000000004000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_SHFT 27 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_4_MASK 0x0000000008000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_SHFT 28 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_5_MASK 0x0000000010000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_SHFT 29 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_6_MASK 0x0000000020000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_SHFT 30 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_7_MASK 0x0000000040000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_SHFT 31 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_8_MASK 0x0000000080000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_SHFT 32 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_9_MASK 0x0000000100000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_SHFT 33 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_10_MASK 0x0000000200000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_SHFT 34 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_11_MASK 0x0000000400000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_SHFT 35 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_12_MASK 0x0000000800000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_SHFT 36 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_13_MASK 0x0000001000000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_SHFT 37 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_14_MASK 0x0000002000000000UL +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_SHFT 38 +#define UVH_LOCAL_INT0_ENABLE_LB_IRQ_INT_15_MASK 0x0000004000000000UL +#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_SHFT 39 +#define UVH_LOCAL_INT0_ENABLE_L1_NMI_INT_MASK 0x0000008000000000UL +#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_SHFT 40 +#define UVH_LOCAL_INT0_ENABLE_STOP_CLOCK_MASK 0x0000010000000000UL +#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_SHFT 41 +#define UVH_LOCAL_INT0_ENABLE_ASIC_TO_L1_MASK 0x0000020000000000UL +#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_SHFT 42 +#define UVH_LOCAL_INT0_ENABLE_L1_TO_ASIC_MASK 0x0000040000000000UL +#define UVH_LOCAL_INT0_ENABLE_LTC_INT_SHFT 43 +#define UVH_LOCAL_INT0_ENABLE_LTC_INT_MASK 0x0000080000000000UL +#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_SHFT 44 +#define UVH_LOCAL_INT0_ENABLE_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL + +union uvh_local_int0_enable_u { + unsigned long v; + struct uvh_local_int0_enable_s { + unsigned long lb_hcerr : 1; /* RW */ + unsigned long gr0_hcerr : 1; /* RW */ + unsigned long gr1_hcerr : 1; /* RW */ + unsigned long lh_hcerr : 1; /* RW */ + unsigned long rh_hcerr : 1; /* RW */ + unsigned long xn_hcerr : 1; /* RW */ + unsigned long si_hcerr : 1; /* RW */ + unsigned long lb_aoerr0 : 1; /* RW */ + unsigned long gr0_aoerr0 : 1; /* RW */ + unsigned long gr1_aoerr0 : 1; /* RW */ + unsigned long lh_aoerr0 : 1; /* RW */ + unsigned long rh_aoerr0 : 1; /* RW */ + unsigned long xn_aoerr0 : 1; /* RW */ + unsigned long si_aoerr0 : 1; /* RW */ + unsigned long lb_aoerr1 : 1; /* RW */ + unsigned long gr0_aoerr1 : 1; /* RW */ + unsigned long gr1_aoerr1 : 1; /* RW */ + unsigned long lh_aoerr1 : 1; /* RW */ + unsigned long rh_aoerr1 : 1; /* RW */ + unsigned long xn_aoerr1 : 1; /* RW */ + unsigned long si_aoerr1 : 1; /* RW */ + unsigned long rh_vpi_int : 1; /* RW */ + unsigned long system_shutdown_int : 1; /* RW */ + unsigned long lb_irq_int_0 : 1; /* RW */ + unsigned long lb_irq_int_1 : 1; /* RW */ + unsigned long lb_irq_int_2 : 1; /* RW */ + unsigned long lb_irq_int_3 : 1; /* RW */ + unsigned long lb_irq_int_4 : 1; /* RW */ + unsigned long lb_irq_int_5 : 1; /* RW */ + unsigned long lb_irq_int_6 : 1; /* RW */ + unsigned long lb_irq_int_7 : 1; /* RW */ + unsigned long lb_irq_int_8 : 1; /* RW */ + unsigned long lb_irq_int_9 : 1; /* RW */ + unsigned long lb_irq_int_10 : 1; /* RW */ + unsigned long lb_irq_int_11 : 1; /* RW */ + unsigned long lb_irq_int_12 : 1; /* RW */ + unsigned long lb_irq_int_13 : 1; /* RW */ + unsigned long lb_irq_int_14 : 1; /* RW */ + unsigned long lb_irq_int_15 : 1; /* RW */ + unsigned long l1_nmi_int : 1; /* RW */ + unsigned long stop_clock : 1; /* RW */ + unsigned long asic_to_l1 : 1; /* RW */ + unsigned long l1_to_asic : 1; /* RW */ + unsigned long ltc_int : 1; /* RW */ + unsigned long la_seq_trigger : 1; /* RW */ + unsigned long rsvd_45_63 : 19; /* */ + } s; +}; + /* ========================================================================= */ /* UVH_NODE_ID */ /* ========================================================================= */ @@ -283,6 +645,73 @@ union uvh_node_id_u { } s; }; +/* ========================================================================= */ +/* UVH_NODE_PRESENT_TABLE */ +/* ========================================================================= */ +#define UVH_NODE_PRESENT_TABLE 0x1400UL +#define UVH_NODE_PRESENT_TABLE_DEPTH 16 + +#define UVH_NODE_PRESENT_TABLE_NODES_SHFT 0 +#define UVH_NODE_PRESENT_TABLE_NODES_MASK 0xffffffffffffffffUL + +union uvh_node_present_table_u { + unsigned long v; + struct uvh_node_present_table_s { + unsigned long nodes : 64; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL + +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24 +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL + +union uvh_rh_gam_alias210_redirect_config_0_mmr_u { + unsigned long v; + struct uvh_rh_gam_alias210_redirect_config_0_mmr_s { + unsigned long rsvd_0_23 : 24; /* */ + unsigned long dest_base : 22; /* RW */ + unsigned long rsvd_46_63: 18; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL + +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24 +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL + +union uvh_rh_gam_alias210_redirect_config_1_mmr_u { + unsigned long v; + struct uvh_rh_gam_alias210_redirect_config_1_mmr_s { + unsigned long rsvd_0_23 : 24; /* */ + unsigned long dest_base : 22; /* RW */ + unsigned long rsvd_46_63: 18; /* */ + } s; +}; + +/* ========================================================================= */ +/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR */ +/* ========================================================================= */ +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL + +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24 +#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL + +union uvh_rh_gam_alias210_redirect_config_2_mmr_u { + unsigned long v; + struct uvh_rh_gam_alias210_redirect_config_2_mmr_s { + unsigned long rsvd_0_23 : 24; /* */ + unsigned long dest_base : 22; /* RW */ + unsigned long rsvd_46_63: 18; /* */ + } s; +}; + /* ========================================================================= */ /* UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR */ /* ========================================================================= */ @@ -369,5 +798,77 @@ union uvh_si_addr_map_config_u { } s; }; +/* ========================================================================= */ +/* UVH_SI_ALIAS0_OVERLAY_CONFIG */ +/* ========================================================================= */ +#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL + +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24 +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48 +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63 +#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL + +union uvh_si_alias0_overlay_config_u { + unsigned long v; + struct uvh_si_alias0_overlay_config_s { + unsigned long rsvd_0_23: 24; /* */ + unsigned long base : 8; /* RW */ + unsigned long rsvd_32_47: 16; /* */ + unsigned long m_alias : 5; /* RW */ + unsigned long rsvd_53_62: 10; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_SI_ALIAS1_OVERLAY_CONFIG */ +/* ========================================================================= */ +#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL + +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24 +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48 +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63 +#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL + +union uvh_si_alias1_overlay_config_u { + unsigned long v; + struct uvh_si_alias1_overlay_config_s { + unsigned long rsvd_0_23: 24; /* */ + unsigned long base : 8; /* RW */ + unsigned long rsvd_32_47: 16; /* */ + unsigned long m_alias : 5; /* RW */ + unsigned long rsvd_53_62: 10; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + +/* ========================================================================= */ +/* UVH_SI_ALIAS2_OVERLAY_CONFIG */ +/* ========================================================================= */ +#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL + +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24 +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48 +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63 +#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL + +union uvh_si_alias2_overlay_config_u { + unsigned long v; + struct uvh_si_alias2_overlay_config_s { + unsigned long rsvd_0_23: 24; /* */ + unsigned long base : 8; /* RW */ + unsigned long rsvd_32_47: 16; /* */ + unsigned long m_alias : 5; /* RW */ + unsigned long rsvd_53_62: 10; /* */ + unsigned long enable : 1; /* RW */ + } s; +}; + #endif /* __ASM_X86_UV_MMRS__ */ -- cgit v1.2.3 From 15ce60056b24a65b65e28de973a9fd8ac0750a2f Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 13:20:11 +0200 Subject: xen: export get_phys_to_machine -tip testing found the following xen-console symbols trouble: ERROR: "get_phys_to_machine" [drivers/video/xen-fbfront.ko] undefined! ERROR: "get_phys_to_machine" [drivers/net/xen-netfront.ko] undefined! ERROR: "get_phys_to_machine" [drivers/input/xen-kbdfront.ko] undefined! with: http://redhat.com/~mingo/misc/config-Mon_Jun__2_12_25_13_CEST_2008.bad --- arch/x86/xen/mmu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index eef3b5c6e2fe..17f374eb1faa 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -136,6 +136,7 @@ unsigned long get_phys_to_machine(unsigned long pfn) idx = p2m_index(pfn); return p2m_top[topidx][idx]; } +EXPORT_SYMBOL_GPL(get_phys_to_machine); static void alloc_p2m(unsigned long **pp, unsigned long *mfnp) { -- cgit v1.2.3 From e2426cf85f8db5891fb5831323d2d0c176c4dadc Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 31 May 2008 01:24:27 +0100 Subject: xen: avoid hypercalls when updating unpinned pud/pmd When operating on an unpinned pagetable (ie, one under construction or destruction), it isn't necessary to use a hypercall to update a pud/pmd entry. Jan Beulich observed that a similar optimisation avoided many thousands of hypercalls while doing a kernel build. One tricky part is that early in the kernel boot there's no page structure, so we can't check to see if the page is pinned. In that case, we just always use the hypercall. Signed-off-by: Jeremy Fitzhardinge Cc: Jan Beulich Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 14 +++++++++++--- arch/x86/xen/mmu.c | 39 +++++++++++++++++++++++++++++++++++---- arch/x86/xen/mmu.h | 8 ++++---- 3 files changed, 50 insertions(+), 11 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index b94f63ac228b..ed9f04b3836d 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -901,6 +901,14 @@ static __init void xen_pagetable_setup_done(pgd_t *base) pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base))); } +static __init void xen_post_allocator_init(void) +{ + pv_mmu_ops.set_pmd = xen_set_pmd; + pv_mmu_ops.set_pud = xen_set_pud; + + xen_mark_init_mm_pinned(); +} + /* This is called once we have the cpu_possible_map */ void xen_setup_vcpu_info_placement(void) { @@ -988,7 +996,7 @@ static const struct pv_init_ops xen_init_ops __initdata = { .banner = xen_banner, .memory_setup = xen_memory_setup, .arch_setup = xen_arch_setup, - .post_allocator_init = xen_mark_init_mm_pinned, + .post_allocator_init = xen_post_allocator_init, }; static const struct pv_time_ops xen_time_ops __initdata = { @@ -1100,7 +1108,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .set_pte = NULL, /* see xen_pagetable_setup_* */ .set_pte_at = xen_set_pte_at, - .set_pmd = xen_set_pmd, + .set_pmd = xen_set_pmd_hyper, .pte_val = xen_pte_val, .pte_flags = native_pte_val, @@ -1111,7 +1119,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .set_pte_atomic = xen_set_pte_atomic, .set_pte_present = xen_set_pte_at, - .set_pud = xen_set_pud, + .set_pud = xen_set_pud_hyper, .pte_clear = xen_pte_clear, .pmd_clear = xen_pmd_clear, diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 17f374eb1faa..4fa0934db925 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -223,7 +223,14 @@ void make_lowmem_page_readwrite(void *vaddr) } -void xen_set_pmd(pmd_t *ptr, pmd_t val) +static bool page_pinned(void *ptr) +{ + struct page *page = virt_to_page(ptr); + + return PagePinned(page); +} + +void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val) { struct multicall_space mcs; struct mmu_update *u; @@ -241,6 +248,18 @@ void xen_set_pmd(pmd_t *ptr, pmd_t val) preempt_enable(); } +void xen_set_pmd(pmd_t *ptr, pmd_t val) +{ + /* If page is not pinned, we can just update the entry + directly */ + if (!page_pinned(ptr)) { + *ptr = val; + return; + } + + xen_set_pmd_hyper(ptr, val); +} + /* * Associate a virtual page frame with a given physical page frame * and protection flags for that frame. @@ -348,7 +367,7 @@ pmdval_t xen_pmd_val(pmd_t pmd) return ret; } -void xen_set_pud(pud_t *ptr, pud_t val) +void xen_set_pud_hyper(pud_t *ptr, pud_t val) { struct multicall_space mcs; struct mmu_update *u; @@ -366,6 +385,18 @@ void xen_set_pud(pud_t *ptr, pud_t val) preempt_enable(); } +void xen_set_pud(pud_t *ptr, pud_t val) +{ + /* If page is not pinned, we can just update the entry + directly */ + if (!page_pinned(ptr)) { + *ptr = val; + return; + } + + xen_set_pud_hyper(ptr, val); +} + void xen_set_pte(pte_t *ptep, pte_t pte) { ptep->pte_high = pte.pte_high; @@ -387,7 +418,7 @@ void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) void xen_pmd_clear(pmd_t *pmdp) { - xen_set_pmd(pmdp, __pmd(0)); + set_pmd(pmdp, __pmd(0)); } pmd_t xen_make_pmd(pmdval_t pmd) @@ -758,7 +789,7 @@ void xen_exit_mmap(struct mm_struct *mm) spin_lock(&mm->page_table_lock); /* pgd may not be pinned in the error exit path of execve */ - if (PagePinned(virt_to_page(mm->pgd))) + if (page_pinned(mm->pgd)) xen_pgd_unpin(mm->pgd); spin_unlock(&mm->page_table_lock); diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index 5fe961caffd4..e3dd09e25c63 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -25,10 +25,6 @@ enum pt_level { void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); -void xen_set_pte(pte_t *ptep, pte_t pteval); -void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval); -void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval); void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next); void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm); @@ -45,10 +41,14 @@ pte_t xen_make_pte(pteval_t); pmd_t xen_make_pmd(pmdval_t); pgd_t xen_make_pgd(pgdval_t); +void xen_set_pte(pte_t *ptep, pte_t pteval); void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval); void xen_set_pte_atomic(pte_t *ptep, pte_t pte); +void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval); void xen_set_pud(pud_t *ptr, pud_t val); +void xen_set_pmd_hyper(pmd_t *pmdp, pmd_t pmdval); +void xen_set_pud_hyper(pud_t *ptr, pud_t val); void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); void xen_pmd_clear(pmd_t *pmdp); -- cgit v1.2.3 From 9c7a794209f8a91f47697c3be20597eb60531e6d Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 31 May 2008 01:33:02 +0100 Subject: xen: restore vcpu_info mapping If we're using vcpu_info mapping, then make sure its restored on all processors before relasing them from stop_machine. The only complication is that if this fails, we can't continue because we've already made assumptions that the mapping is available (baked in calls to the _direct versions of the functions, for example). Fortunately this can only happen with a 32-bit hypervisor, which may possibly run out of mapping space. On a 64-bit hypervisor, this is a non-issue. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 30 +++++++++++++++++++++++++++++- arch/x86/xen/suspend.c | 4 +++- arch/x86/xen/xen-ops.h | 1 + 3 files changed, 33 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index ed9f04b3836d..8e6152e6ed88 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -98,7 +98,7 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; */ static int have_vcpu_info_placement = 1; -static void __init xen_vcpu_setup(int cpu) +static void xen_vcpu_setup(int cpu) { struct vcpu_register_vcpu_info info; int err; @@ -136,6 +136,34 @@ static void __init xen_vcpu_setup(int cpu) } } +/* + * On restore, set the vcpu placement up again. + * If it fails, then we're in a bad state, since + * we can't back out from using it... + */ +void xen_vcpu_restore(void) +{ + if (have_vcpu_info_placement) { + int cpu; + + for_each_online_cpu(cpu) { + bool other_cpu = (cpu != smp_processor_id()); + + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL)) + BUG(); + + xen_vcpu_setup(cpu); + + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL)) + BUG(); + } + + BUG_ON(!have_vcpu_info_placement); + } +} + static void __init xen_banner(void) { printk(KERN_INFO "Booting paravirtualized kernel on %s\n", diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 7620a16fe535..7ab10f6b39a5 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -26,6 +26,8 @@ void xen_pre_suspend(void) void xen_post_suspend(int suspend_cancelled) { + xen_setup_shared_info(); + if (suspend_cancelled) { xen_start_info->store_mfn = pfn_to_mfn(xen_start_info->store_mfn); @@ -35,8 +37,8 @@ void xen_post_suspend(int suspend_cancelled) #ifdef CONFIG_SMP xen_cpu_initialized_map = cpu_online_map; #endif + xen_vcpu_restore(); } - xen_setup_shared_info(); } diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index a0503acad664..a457e03e1b21 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -26,6 +26,7 @@ char * __init xen_memory_setup(void); void __init xen_arch_setup(void); void __init xen_init_IRQ(void); void xen_enable_sysenter(void); +void xen_vcpu_restore(void); void __init xen_build_dynamic_phys_to_machine(void); -- cgit v1.2.3 From d07af1f0e3a3e378074fc36322dd7b0e72d9a3e2 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 31 May 2008 01:33:03 +0100 Subject: xen: resume timers on all vcpus On resume, the vcpu timer modes will not be restored. The timer infrastructure doesn't do this for us, since it assumes the cpus are offline. We can just poke the other vcpus into the right mode directly though. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/suspend.c | 1 + arch/x86/xen/time.c | 13 +++++++++++++ arch/x86/xen/xen-ops.h | 1 + 3 files changed, 15 insertions(+) diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 7ab10f6b39a5..251669a932d4 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -38,6 +38,7 @@ void xen_post_suspend(int suspend_cancelled) xen_cpu_initialized_map = cpu_online_map; #endif xen_vcpu_restore(); + xen_timer_resume(); } } diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index c39e1a5aa241..ea137fb660c0 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -572,6 +572,19 @@ void xen_setup_cpu_clockevents(void) clockevents_register_device(&__get_cpu_var(xen_clock_events)); } +void xen_timer_resume(void) +{ + int cpu; + + if (xen_clockevent != &xen_vcpuop_clockevent) + return; + + for_each_online_cpu(cpu) { + if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL)) + BUG(); + } +} + __init void xen_time_init(void) { int cpu = smp_processor_id(); diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index a457e03e1b21..9a055592a307 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -37,6 +37,7 @@ void __init xen_time_init(void); unsigned long xen_get_wallclock(void); int xen_set_wallclock(unsigned long time); unsigned long long xen_sched_clock(void); +void xen_timer_resume(void); irqreturn_t xen_debug_interrupt(int irq, void *dev_id); -- cgit v1.2.3 From 7e0edc1bc343231029084761ebf59e522902eb49 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Sat, 31 May 2008 01:33:04 +0100 Subject: xen: add new Xen elfnote types and use them appropriately Define recently added XEN_ELFNOTEs, and use them appropriately. Most significantly, this enables domain checkpointing (xm save -c). Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/xen-head.S | 5 +++++ include/xen/interface/elfnote.h | 20 ++++++++++++++++++++ 2 files changed, 25 insertions(+) diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 2ab5f42f34d8..ef6c9e005f90 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -7,6 +7,7 @@ #include #include #include +#include __INIT ENTRY(startup_xen) @@ -32,5 +33,9 @@ ENTRY(hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz "!writable_page_tables|pae_pgdir_above_4gb") ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes") ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic") + ELFNOTE(Xen, XEN_ELFNOTE_L1_MFN_VALID, + .quad _PAGE_PRESENT; .quad _PAGE_PRESENT) + ELFNOTE(Xen, XEN_ELFNOTE_SUSPEND_CANCEL, .long 1) + ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW, .long __HYPERVISOR_VIRT_START) #endif /*CONFIG_XEN */ diff --git a/include/xen/interface/elfnote.h b/include/xen/interface/elfnote.h index a64d3df5bd95..7a8262c375cc 100644 --- a/include/xen/interface/elfnote.h +++ b/include/xen/interface/elfnote.h @@ -120,6 +120,26 @@ */ #define XEN_ELFNOTE_BSD_SYMTAB 11 +/* + * The lowest address the hypervisor hole can begin at (numeric). + * + * This must not be set higher than HYPERVISOR_VIRT_START. Its presence + * also indicates to the hypervisor that the kernel can deal with the + * hole starting at a higher address. + */ +#define XEN_ELFNOTE_HV_START_LOW 12 + +/* + * List of maddr_t-sized mask/value pairs describing how to recognize + * (non-present) L1 page table entries carrying valid MFNs (numeric). + */ +#define XEN_ELFNOTE_L1_MFN_VALID 13 + +/* + * Whether or not the guest supports cooperative suspend cancellation. + */ +#define XEN_ELFNOTE_SUSPEND_CANCEL 14 + #endif /* __XEN_PUBLIC_ELFNOTE_H__ */ /* -- cgit v1.2.3 From e0773410247f1e5fc6f7c52a4c5f3c6c9873d527 Mon Sep 17 00:00:00 2001 From: Abhishek Sagar Date: Sat, 31 May 2008 14:24:02 +0530 Subject: ftrace: export kretprobe_trampoline for function tracer Follow suit from kprobe implementations on other archs and make kretprobe_trampoline non-static. Ftrace implmentation (more specifically, kernel/trace/trace.c) requires access to it (see-> http://kerneltrap.org/mailarchive/linux-kernel/2008/5/27/1955234). Signed-off-by: Abhishek Sagar Signed-off-by: Ingo Molnar --- arch/arm/kernel/kprobes.c | 2 +- include/asm-arm/kprobes.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 5593dd207216..5ee39e10c8d1 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -274,7 +274,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, * for kretprobe handlers which should normally be interested in r0 only * anyway. */ -static void __attribute__((naked)) __kprobes kretprobe_trampoline(void) +void __naked __kprobes kretprobe_trampoline(void) { __asm__ __volatile__ ( "stmdb sp!, {r0 - r11} \n\t" diff --git a/include/asm-arm/kprobes.h b/include/asm-arm/kprobes.h index c042194d3ab5..b1a37876942d 100644 --- a/include/asm-arm/kprobes.h +++ b/include/asm-arm/kprobes.h @@ -59,6 +59,7 @@ struct kprobe_ctlblk { }; void arch_remove_kprobe(struct kprobe *); +void kretprobe_trampoline(void); int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr); int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr); -- cgit v1.2.3 From 3d1ba1da2b4ff4ace7801e99fb9a3095b182d847 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 13:50:10 +0200 Subject: x86: fix nmi.c build bug apic.h needs to be included for the apic_write_around() definition. --- arch/x86/kernel/nmi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index bf143f191fb1..cbd4fa3c475b 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -11,6 +11,8 @@ * Mikael Pettersson : PM converted to driver model. Disable/enable API. */ +#include + #include #include #include -- cgit v1.2.3 From 1a7e612fa5ea0311232bd5418a40ec7280557789 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 31 May 2008 16:18:11 +0100 Subject: [ARM] 5074/1: fix warning: missing terminating ' character Signed-off-by: Dmitry Baryshkov Acked-by: Richard Purdie Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa27x-udc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h index 9cf0b1f88112..2d4e9cd3a5e3 100644 --- a/include/asm-arm/arch-pxa/pxa27x-udc.h +++ b/include/asm-arm/arch-pxa/pxa27x-udc.h @@ -2,7 +2,7 @@ #define _ASM_ARCH_PXA27X_UDC_H #ifdef _ASM_ARCH_PXA25X_UDC_H -#error You can't include both PXA25x and PXA27x UDC support +#error You cannot include both PXA25x and PXA27x UDC support #endif #define UDCCR __REG(0x40600000) /* UDC Control Register */ -- cgit v1.2.3 From 720046de27ec2a96d4497dbca8ee98657efa059c Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 24 Apr 2008 15:13:36 +0100 Subject: [ARM] pxa: don't register lpd270 cpld_irq sysdev if !lpd270 Don't register the LPD270 cpld_irq system device when we're not running on a LPD270 machine - "cpld_irq" is also registered (separately) by Lubbock and Mainstone. Signed-off-by: Russell King --- arch/arm/mach-pxa/lpd270.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index a20e4b1649d6..6fd7b8b753fc 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -134,9 +134,12 @@ static struct sys_device lpd270_irq_device = { static int __init lpd270_irq_device_init(void) { - int ret = sysdev_class_register(&lpd270_irq_sysclass); - if (ret == 0) - ret = sysdev_register(&lpd270_irq_device); + int ret = -ENODEV; + if (machine_is_logicpd_pxa270()) { + ret = sysdev_class_register(&lpd270_irq_sysclass); + if (ret == 0) + ret = sysdev_register(&lpd270_irq_device); + } return ret; } -- cgit v1.2.3 From 04ba0f656f7580d8a51a5b3441e088309141b67a Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 24 Apr 2008 15:23:25 +0100 Subject: [ARM] pxa: avoid registering multiple pxa2xx_pcmcia devices cm_x270 and mainstone both register their PCMCIA devices using the same name, resulting in a warning message from the kernel. Avoid this by making the cm_x270 and mainstone PCMCIA initialisation conditional on the machine type we're running on. Signed-off-by: Russell King --- drivers/pcmcia/pxa2xx_cm_x270.c | 4 ++++ drivers/pcmcia/pxa2xx_mainstone.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c index e7ab060ff118..4a6c020afb37 100644 --- a/drivers/pcmcia/pxa2xx_cm_x270.c +++ b/drivers/pcmcia/pxa2xx_cm_x270.c @@ -18,6 +18,7 @@ #include #include +#include #include #include @@ -147,6 +148,9 @@ static int __init cmx270_pcmcia_init(void) { int ret; + if (!machine_is_armcore()) + return -ENODEV; + cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); if (!cmx270_pcmcia_device) diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c index 145b85e0f02c..36a59960b5af 100644 --- a/drivers/pcmcia/pxa2xx_mainstone.c +++ b/drivers/pcmcia/pxa2xx_mainstone.c @@ -22,6 +22,7 @@ #include #include +#include #include #include @@ -153,6 +154,9 @@ static int __init mst_pcmcia_init(void) { int ret; + if (!machine_is_mainstone()) + return -ENODEV; + mst_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); if (!mst_pcmcia_device) return -ENOMEM; -- cgit v1.2.3 From 4e5e8de0dbdeb08df2b4c15fa2b0ba2216091793 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 24 Apr 2008 15:28:11 +0100 Subject: [ARM] pxa: avoid kfreeing static data if platform device fails to register When a dynamically allocated platform device is 'put', the platform device's platform_data is kfree'd. This is bad if it's pointing at static data. Use the provided function to register platform data for these devices. This also means we can mark the pcmcia ops structures as __initdata. Signed-off-by: Russell King --- drivers/pcmcia/pxa2xx_cm_x270.c | 11 +++++++---- drivers/pcmcia/pxa2xx_mainstone.c | 9 +++++---- drivers/pcmcia/pxa2xx_sharpsl.c | 12 +++++++----- 3 files changed, 19 insertions(+), 13 deletions(-) diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c index 4a6c020afb37..f123fce65f2e 100644 --- a/drivers/pcmcia/pxa2xx_cm_x270.c +++ b/drivers/pcmcia/pxa2xx_cm_x270.c @@ -131,7 +131,7 @@ static void cmx270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) } -static struct pcmcia_low_level cmx270_pcmcia_ops = { +static struct pcmcia_low_level cmx270_pcmcia_ops __initdata = { .owner = THIS_MODULE, .hw_init = cmx270_pcmcia_hw_init, .hw_shutdown = cmx270_pcmcia_shutdown, @@ -156,10 +156,13 @@ static int __init cmx270_pcmcia_init(void) if (!cmx270_pcmcia_device) return -ENOMEM; - cmx270_pcmcia_device->dev.platform_data = &cmx270_pcmcia_ops; + ret = platform_device_add_data(cmx270_pcmcia_device, &cmx270_pcmcia_ops, + sizeof(cmx270_pcmcia_ops)); - printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n"); - ret = platform_device_add(cmx270_pcmcia_device); + if (ret == 0) { + printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n"); + ret = platform_device_add(cmx270_pcmcia_device); + } if (ret) platform_device_put(cmx270_pcmcia_device); diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c index 36a59960b5af..92d1cc33808c 100644 --- a/drivers/pcmcia/pxa2xx_mainstone.c +++ b/drivers/pcmcia/pxa2xx_mainstone.c @@ -137,7 +137,7 @@ static void mst_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) { } -static struct pcmcia_low_level mst_pcmcia_ops = { +static struct pcmcia_low_level mst_pcmcia_ops __initdata = { .owner = THIS_MODULE, .hw_init = mst_pcmcia_hw_init, .hw_shutdown = mst_pcmcia_hw_shutdown, @@ -161,9 +161,10 @@ static int __init mst_pcmcia_init(void) if (!mst_pcmcia_device) return -ENOMEM; - mst_pcmcia_device->dev.platform_data = &mst_pcmcia_ops; - - ret = platform_device_add(mst_pcmcia_device); + ret = platform_device_add_data(mst_pcmcia_device, &mst_pcmcia_ops, + sizeof(mst_pcmcia_ops)); + if (ret == 0) + ret = platform_device_add(mst_pcmcia_device); if (ret) platform_device_put(mst_pcmcia_device); diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c index d5c33bd78d68..d71f93d45833 100644 --- a/drivers/pcmcia/pxa2xx_sharpsl.c +++ b/drivers/pcmcia/pxa2xx_sharpsl.c @@ -222,7 +222,7 @@ static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) sharpsl_pcmcia_init_reset(skt); } -static struct pcmcia_low_level sharpsl_pcmcia_ops = { +static struct pcmcia_low_level sharpsl_pcmcia_ops __initdata = { .owner = THIS_MODULE, .hw_init = sharpsl_pcmcia_hw_init, .hw_shutdown = sharpsl_pcmcia_hw_shutdown, @@ -261,10 +261,12 @@ static int __init sharpsl_pcmcia_init(void) if (!sharpsl_pcmcia_device) return -ENOMEM; - sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops; - sharpsl_pcmcia_device->dev.parent = platform_scoop_config->devs[0].dev; - - ret = platform_device_add(sharpsl_pcmcia_device); + ret = platform_device_add_data(sharpsl_pcmcia_device, + &sharpsl_pcmcia_ops, sizeof(sharpsl_pcmcia_ops)); + if (ret == 0) { + sharpsl_pcmcia_device->dev.parent = platform_scoop_config->devs[0].dev; + ret = platform_device_add(sharpsl_pcmcia_device); + } if (ret) platform_device_put(sharpsl_pcmcia_device); -- cgit v1.2.3 From ffdf786291636137ef2d51c3a5d340793032aa28 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 18 May 2008 14:57:59 +0100 Subject: [ARM] pxa: Add PXA3_ prefix to PXA3 specific constants standby.S contains both PXA2 and PXA3 specific code. The PXA3 specific constants clash with the PXA2 ones, so give them a prefix. Signed-off-by: Russell King --- arch/arm/mach-pxa/standby.S | 82 ++++++++++++++++++++++----------------------- 1 file changed, 41 insertions(+), 41 deletions(-) diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index 167412e6bec8..a37ef1c4b9e9 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -35,20 +35,20 @@ ENTRY(pxa_cpu_standby) #ifdef CONFIG_PXA3xx -#define MDCNFG 0x0000 -#define MDCNFG_DMCEN (1 << 30) -#define DDR_HCAL 0x0060 -#define DDR_HCAL_HCRNG 0x1f -#define DDR_HCAL_HCPROG (1 << 28) -#define DDR_HCAL_HCEN (1 << 31) -#define DMCIER 0x0070 -#define DMCIER_EDLP (1 << 29) -#define DMCISR 0x0078 -#define RCOMP 0x0100 -#define RCOMP_SWEVAL (1 << 31) +#define PXA3_MDCNFG 0x0000 +#define PXA3_MDCNFG_DMCEN (1 << 30) +#define PXA3_DDR_HCAL 0x0060 +#define PXA3_DDR_HCAL_HCRNG 0x1f +#define PXA3_DDR_HCAL_HCPROG (1 << 28) +#define PXA3_DDR_HCAL_HCEN (1 << 31) +#define PXA3_DMCIER 0x0070 +#define PXA3_DMCIER_EDLP (1 << 29) +#define PXA3_DMCISR 0x0078 +#define PXA3_RCOMP 0x0100 +#define PXA3_RCOMP_SWEVAL (1 << 31) ENTRY(pm_enter_standby_start) - mov r1, #0xf6000000 @ DMEMC_REG_BASE (MDCNFG) + mov r1, #0xf6000000 @ DMEMC_REG_BASE (PXA3_MDCNFG) add r1, r1, #0x00100000 /* @@ -59,54 +59,54 @@ ENTRY(pm_enter_standby_start) * This also means that only the dynamic memory controller * can be reliably accessed in the code following standby. */ - ldr r2, [r1] @ Dummy read MDCNFG + ldr r2, [r1] @ Dummy read PXA3_MDCNFG mcr p14, 0, r0, c7, c0, 0 .rept 8 nop .endr - ldr r0, [r1, #DDR_HCAL] @ Clear (and wait for) HCEN - bic r0, r0, #DDR_HCAL_HCEN - str r0, [r1, #DDR_HCAL] -1: ldr r0, [r1, #DDR_HCAL] - tst r0, #DDR_HCAL_HCEN + ldr r0, [r1, #PXA3_DDR_HCAL] @ Clear (and wait for) HCEN + bic r0, r0, #PXA3_DDR_HCAL_HCEN + str r0, [r1, #PXA3_DDR_HCAL] +1: ldr r0, [r1, #PXA3_DDR_HCAL] + tst r0, #PXA3_DDR_HCAL_HCEN bne 1b - ldr r0, [r1, #RCOMP] @ Initiate RCOMP - orr r0, r0, #RCOMP_SWEVAL - str r0, [r1, #RCOMP] + ldr r0, [r1, #PXA3_RCOMP] @ Initiate RCOMP + orr r0, r0, #PXA3_RCOMP_SWEVAL + str r0, [r1, #PXA3_RCOMP] - mov r0, #~0 @ Clear interrupts - str r0, [r1, #DMCISR] + mov r0, #~0 @ Clear interrupts + str r0, [r1, #PXA3_DMCISR] - ldr r0, [r1, #DMCIER] @ set DMIER[EDLP] - orr r0, r0, #DMCIER_EDLP - str r0, [r1, #DMCIER] + ldr r0, [r1, #PXA3_DMCIER] @ set DMIER[EDLP] + orr r0, r0, #PXA3_DMCIER_EDLP + str r0, [r1, #PXA3_DMCIER] - ldr r0, [r1, #DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN - bic r0, r0, #DDR_HCAL_HCRNG - orr r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG - str r0, [r1, #DDR_HCAL] + ldr r0, [r1, #PXA3_DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN + bic r0, r0, #PXA3_DDR_HCAL_HCRNG + orr r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG + str r0, [r1, #PXA3_DDR_HCAL] -1: ldr r0, [r1, #DMCISR] - tst r0, #DMCIER_EDLP +1: ldr r0, [r1, #PXA3_DMCISR] + tst r0, #PXA3_DMCIER_EDLP beq 1b - ldr r0, [r1, #MDCNFG] @ set MDCNFG[DMCEN] - orr r0, r0, #MDCNFG_DMCEN - str r0, [r1, #MDCNFG] -1: ldr r0, [r1, #MDCNFG] - tst r0, #MDCNFG_DMCEN + ldr r0, [r1, #PXA3_MDCNFG] @ set PXA3_MDCNFG[DMCEN] + orr r0, r0, #PXA3_MDCNFG_DMCEN + str r0, [r1, #PXA3_MDCNFG] +1: ldr r0, [r1, #PXA3_MDCNFG] + tst r0, #PXA3_MDCNFG_DMCEN beq 1b - ldr r0, [r1, #DDR_HCAL] @ set DDR_HCAL[HCRNG] + ldr r0, [r1, #PXA3_DDR_HCAL] @ set PXA3_DDR_HCAL[HCRNG] orr r0, r0, #2 @ HCRNG - str r0, [r1, #DDR_HCAL] + str r0, [r1, #PXA3_DDR_HCAL] - ldr r0, [r1, #DMCIER] @ Clear the interrupt + ldr r0, [r1, #PXA3_DMCIER] @ Clear the interrupt bic r0, r0, #0x20000000 - str r0, [r1, #DMCIER] + str r0, [r1, #PXA3_DMCIER] mov pc, lr ENTRY(pm_enter_standby_end) -- cgit v1.2.3 From e3ba22db09408baee721897fb1b50e16f071d916 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Sat, 24 May 2008 17:06:45 +0100 Subject: [ARM] 5056/1: [AT91] Cleanup YL9200 board file Cleanup the YL9200 board-support file. Other things fixed are: - Use new-style UART initialization - Register all LEDs as gpio_leds. - NOR Flash error noted in comments fixed by increasing YL9200_FLASH_SIZE - The only I2C device is the AT24C eeprom. - Setup of NWAIT pin and programming of SMC controller for the LCD/VGA. - Configure touchscreen interrupt pin. Also adding the board to the KConfig and Makefile. Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/Kconfig | 6 + arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/board-yl-9200.c | 853 +++++++++++++++++-------------------- 3 files changed, 394 insertions(+), 466 deletions(-) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 0fc07b6db749..3d549a9afe1d 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -126,6 +126,12 @@ config MACH_ECBAT91 Select this if you are using emQbit's ECB_AT91 board. +config MACH_YL9200 + bool "ucDragon YL-9200" + depends on ARCH_AT91RM9200 + help + Select this if you are using the ucDragon YL-9200 board. + endif # ---------------------------------------------------------- diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 8d9bc0153b18..995be14b2c42 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o +obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o # AT91SAM9260 board-specific support obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index b5717108991d..7079050ab88d 100755 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -1,11 +1,10 @@ /* * linux/arch/arm/mach-at91/board-yl-9200.c * - * Adapted from: - *various board files in - * /arch/arm/mach-at91 - * modifications to convert to YL-9200 platform - * Copyright (C) 2007 S.Birtles + * Adapted from various board files in arch/arm/mach-at91 + * + * Modifications for YL-9200 platform: + * Copyright (C) 2007 S. Birtles * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,13 +25,14 @@ #include #include #include +#include #include #include -/*#include */ #include #include +#include +#include -/*#include */ #include #include #include @@ -45,179 +45,108 @@ #include #include #include -#include -#include #include "generic.h" -#include -#define YL_9200_FLASH_BASE AT91_CHIPSELECT_0 -#define YL_9200_FLASH_SIZE 0x800000 -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - *atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL - *atmel_usart.1: ttyS1 at MMIO 0xfffc0000 (irq = 6) is a ATMEL_SERIAL - *atmel_usart.2: ttyS2 at MMIO 0xfffc4000 (irq = 7) is a ATMEL_SERIAL - *atmel_usart.3: ttyS3 at MMIO 0xfffc8000 (irq = 8) is a ATMEL_SERIAL - *atmel_usart.4: ttyS4 at MMIO 0xfffcc000 (irq = 9) is a ATMEL_SERIAL - * on the YL-9200 we are sitting at the following - *ttyS0 at MMIO 0xfefff200 (irq = 1) is a AT91_SERIAL - *ttyS1 at MMIO 0xfefc4000 (irq = 7) is a AT91_SERIAL - */ +static void __init yl9200_map_io(void) +{ + /* Initialize processor: 18.432 MHz crystal */ + at91rm9200_initialize(18432000, AT91RM9200_PQFP); -/* extern void __init yl_9200_add_device_sounder(struct gpio_sounder *sounders, int nr);*/ + /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ + at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); -static struct at91_uart_config __initdata yl_9200_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 3, - .tty_map = { 4, 1, 0, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); -static void __init yl_9200_map_io(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - /*Also initialises register clocks & gpio*/ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); /*we have a 3 bank system*/ + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); - /* Setup the serial ports and console */ - at91_init_serial(&yl_9200_uart_config); + /* USART0 on ttyS2. (Rx & Tx only to JP3) */ + at91_register_uart(AT91RM9200_ID_US0, 2, 0); - /* Setup the LEDs D2=PB17,D3=PB16 */ - at91_init_leds(AT91_PIN_PB16,AT91_PIN_PB17); /*cpu-led,timer-led*/ + /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */ + at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } -static void __init yl_9200_init_irq(void) +static void __init yl9200_init_irq(void) { at91rm9200_init_interrupts(NULL); } -static struct at91_eth_data __initdata yl_9200_eth_data = { - .phy_irq_pin = AT91_PIN_PB28, - .is_rmii = 1, -}; -static struct at91_usbh_data __initdata yl_9200_usbh_data = { - .ports = 1, /* this should be 1 not 2 for the Yl9200*/ +/* + * LEDs + */ +static struct gpio_led yl9200_leds[] = { + { /* D2 */ + .name = "led2", + .gpio = AT91_PIN_PB17, + .active_low = 1, + .default_trigger = "timer", + }, + { /* D3 */ + .name = "led3", + .gpio = AT91_PIN_PB16, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* D4 */ + .name = "led4", + .gpio = AT91_PIN_PB15, + .active_low = 1, + }, + { /* D5 */ + .name = "led5", + .gpio = AT91_PIN_PB8, + .active_low = 1, + } }; -static struct at91_udc_data __initdata yl_9200_udc_data = { -/*on sheet 7 Schemitic rev 1.0*/ - .pullup_pin = AT91_PIN_PC4, - .vbus_pin= AT91_PIN_PC5, - .pullup_active_low = 1, /*ACTIVE LOW!! due to PNP transistor on page 7*/ - -}; /* -static struct at91_cf_data __initdata yl_9200_cf_data = { -TODO S.BIRTLES - .det_pin = AT91_PIN_xxx, - .rst_pin = AT91_PIN_xxx, - .irq_pin = ... not connected - .vcc_pin = ... always powered - + * Ethernet + */ +static struct at91_eth_data __initdata yl9200_eth_data = { + .phy_irq_pin = AT91_PIN_PB28, + .is_rmii = 1, }; -*/ -static struct at91_mmc_data __initdata yl_9200_mmc_data = { - .det_pin = AT91_PIN_PB9, /*THIS LOOKS CORRECT SHEET7*/ -/* .wp_pin = ... not connected SHEET7*/ - .slot_b = 0, - .wire4 = 1, +/* + * USB Host + */ +static struct at91_usbh_data __initdata yl9200_usbh_data = { + .ports = 1, /* PQFP version of AT91RM9200 */ }; -/* -------------------------------------------------------------------- - * Touch screen - * -------------------------------------------------------------------- */ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -static int ads7843_pendown_state(void) -{ - return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */ -} - -static void __init at91_init_device_ts(void) -{ -/*IMPORTANT NOTE THE SPI INTERFACE IS ALREADY CONFIGURED BY XXX_DEVICES.C -THAT IS TO SAY THAT MISO,MOSI,SPCK AND CS are already configured -we only need to enable the other datapins which are: -PB10/RK1 BUSY -*/ -/* Touchscreen BUSY signal , pin,use pullup ( TODO not currently used in the ADS7843/6.c driver)*/ -at91_set_gpio_input(AT91_PIN_PB10, 1); -} - -#else -static void __init at91_init_device_ts(void) {} -#endif - -static struct ads7846_platform_data ads_info = { - .model = 7843, - .x_min = 150, - .x_max = 3830, - .y_min = 190, - .y_max = 3830, - .vref_delay_usecs = 100, -/* for a 8" touch screen*/ - //.x_plate_ohms = 603, //= 450, S.Birtles TODO - //.y_plate_ohms = 332, //= 250, S.Birtles TODO -/*for a 10.4" touch screen*/ - //.x_plate_ohms =611, - //.y_plate_ohms =325, - - .x_plate_ohms = 576, - .y_plate_ohms = 366, - // - .pressure_max = 15000, /*generally nonsense on the 7843*/ - /*number of times to send query to chip in a given run 0 equals one time (do not set to 0!! ,there is a bug in ADS 7846 code)*/ - .debounce_max = 1, - .debounce_rep = 0, - .debounce_tol = (~0), - .get_pendown_state = ads7843_pendown_state, -}; +/* + * USB Device + */ +static struct at91_udc_data __initdata yl9200_udc_data = { + .pullup_pin = AT91_PIN_PC4, + .vbus_pin = AT91_PIN_PC5, + .pullup_active_low = 1, /* Active Low due to PNP transistor (pg 7) */ -/*static struct canbus_platform_data can_info = { - .model = 2510, }; -*/ - -static struct spi_board_info yl_9200_spi_devices[] = { -/*this sticks it at: - /sys/devices/platform/atmel_spi.0/spi0.0 - /sys/bus/platform/devices/ -Documentation/spi IIRC*/ -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - /*(this IS correct 04-NOV-2007)*/ - { - .modalias = "ads7846", /* because the driver is called ads7846*/ - .chip_select = 0, /*THIS MUST BE AN INDEX INTO AN ARRAY OF pins */ -/*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select*/ - /*.controller_data =AT91_PIN_PA3 ,*/ - .max_speed_hz = 5000*26, /*(4700 * 26)-125000 * 26, (max sample rate @ 3V) * (cmd + data + overhead) */ - .bus_num = 0, - .platform_data = &ads_info, - .irq = AT91_PIN_PB11, - }, -#endif -/*we need to put our CAN driver data here!!*/ -/*THIS IS ALL DUMMY DATA*/ -/* { - .modalias = "mcp2510", //DUMMY for MCP2510 chip - .chip_select = 1,*/ /*THIS MUST BE AN INDEX INTO AN ARRAY OF pins */ - /*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select */ - /* .controller_data =AT91_PIN_PA4 , - .max_speed_hz = 25000 * 26, - .bus_num = 0, - .platform_data = &can_info, - .irq = AT91_PIN_PC0, - }, - */ - //max SPI chip needs to go here +/* + * MMC + */ +static struct at91_mmc_data __initdata yl9200_mmc_data = { + .det_pin = AT91_PIN_PB9, + // .wp_pin = ... not connected + .wire4 = 1, }; -static struct mtd_partition __initdata yl_9200_nand_partition[] = { +/* + * NAND Flash + */ +static struct mtd_partition __initdata yl9200_nand_partition[] = { { .name = "AT91 NAND partition 1, boot", .offset = 0, @@ -242,442 +171,434 @@ static struct mtd_partition __initdata yl_9200_nand_partition[] = { .name = "AT91 NAND partition 5, ext-fs", .offset = 32 * SZ_1M, .size = 32 * SZ_1M - }, + } }; static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) { - *num_partitions = ARRAY_SIZE(yl_9200_nand_partition); - return yl_9200_nand_partition; + *num_partitions = ARRAY_SIZE(yl9200_nand_partition); + return yl9200_nand_partition; } -static struct at91_nand_data __initdata yl_9200_nand_data = { - .ale= 6, - .cle= 7, - /*.det_pin = AT91_PIN_PCxx,*/ /*we don't have a det pin because NandFlash is fixed to board*/ - .rdy_pin = AT91_PIN_PC14, /*R/!B Sheet10*/ - .enable_pin = AT91_PIN_PC15, /*!CE Sheet10 */ +static struct at91_nand_data __initdata yl9200_nand_data = { + .ale = 6, + .cle = 7, + // .det_pin = ... not connected + .rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */ + .enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */ .partition_info = nand_partitions, }; - - /* -TODO S.Birtles -potentially a problem with the size above -physmap platform flash device: 00800000 at 10000000 -physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank -NOR chip too large to fit in mapping. Attempting to cope... - Intel/Sharp Extended Query Table at 0x0031 -Using buffer write method -cfi_cmdset_0001: Erase suspend on write enabled -Reducing visibility of 16384KiB chip to 8192KiB -*/ + * NOR Flash + */ +#define YL9200_FLASH_BASE AT91_CHIPSELECT_0 +#define YL9200_FLASH_SIZE 0x1000000 -static struct mtd_partition yl_9200_flash_partitions[] = { +static struct mtd_partition yl9200_flash_partitions[] = { + { + .name = "Bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { - .name = "Bootloader", - .size = 0x00040000, - .offset = 0, - .mask_flags = MTD_WRITEABLE /* force read-only */ - },{ - .name = "Kernel", - .size = 0x001C0000, - .offset = 0x00040000, - },{ - .name = "Filesystem", - .size = MTDPART_SIZ_FULL, - .offset = 0x00200000 + .name = "Kernel", + .size = 0x001C0000, + .offset = 0x00040000, + }, + { + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0x00200000 } - }; -static struct physmap_flash_data yl_9200_flash_data = { - .width = 2, - .parts = yl_9200_flash_partitions, - .nr_parts = ARRAY_SIZE(yl_9200_flash_partitions), +static struct physmap_flash_data yl9200_flash_data = { + .width = 2, + .parts = yl9200_flash_partitions, + .nr_parts = ARRAY_SIZE(yl9200_flash_partitions), }; -static struct resource yl_9200_flash_resources[] = { -{ - .start = YL_9200_FLASH_BASE, - .end = YL_9200_FLASH_BASE + YL_9200_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, +static struct resource yl9200_flash_resources[] = { + { + .start = YL9200_FLASH_BASE, + .end = YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, } }; -static struct platform_device yl_9200_flash = { +static struct platform_device yl9200_flash = { .name = "physmap-flash", .id = 0, .dev = { - .platform_data = &yl_9200_flash_data, + .platform_data = &yl9200_flash_data, }, - .resource = yl_9200_flash_resources, - .num_resources = ARRAY_SIZE(yl_9200_flash_resources), + .resource = yl9200_flash_resources, + .num_resources = ARRAY_SIZE(yl9200_flash_resources), }; - -static struct gpio_led yl_9200_leds[] = { -/*D2 &D3 are passed directly in via at91_init_leds*/ - { - .name = "led4", /*D4*/ - .gpio = AT91_PIN_PB15, - .active_low = 1, - .default_trigger = "heartbeat", - /*.default_trigger = "timer",*/ - }, - { - .name = "led5", /*D5*/ - .gpio = AT91_PIN_PB8, - .active_low = 1, - .default_trigger = "heartbeat", - } -}; - -//static struct gpio_sounder yl_9200_sounder[] = {*/ -/*This is a simple speaker attached to a gpo line*/ - -// { -// .name = "Speaker", /*LS1*/ -// .gpio = AT91_PIN_PA22, -// .active_low = 0, -// .default_trigger = "heartbeat", - /*.default_trigger = "timer",*/ -// }, -//}; - - - -static struct i2c_board_info __initdata yl_9200_i2c_devices[] = { - { - /*TODO*/ - I2C_BOARD_INFO("CS4334", 0x00), +/* + * I2C (TWI) + */ +static struct i2c_board_info __initdata yl9200_i2c_devices[] = { + { /* EEPROM */ + I2C_BOARD_INFO("24c128", 0x50), } }; - - /* +/* * GPIO Buttons - */ +*/ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button yl_9200_buttons[] = { +static struct gpio_keys_button yl9200_buttons[] = { { .gpio = AT91_PIN_PA24, - .code = BTN_2, + .code = BTN_2, .desc = "SW2", .active_low = 1, .wakeup = 1, }, { .gpio = AT91_PIN_PB1, - .code = BTN_3, + .code = BTN_3, .desc = "SW3", .active_low = 1, .wakeup = 1, }, { .gpio = AT91_PIN_PB2, - .code = BTN_4, + .code = BTN_4, .desc = "SW4", .active_low = 1, .wakeup = 1, }, { .gpio = AT91_PIN_PB6, - .code = BTN_5, + .code = BTN_5, .desc = "SW5", .active_low = 1, .wakeup = 1, - }, - + } }; -static struct gpio_keys_platform_data yl_9200_button_data = { - .buttons = yl_9200_buttons, - .nbuttons = ARRAY_SIZE(yl_9200_buttons), +static struct gpio_keys_platform_data yl9200_button_data = { + .buttons = yl9200_buttons, + .nbuttons = ARRAY_SIZE(yl9200_buttons), }; -static struct platform_device yl_9200_button_device = { +static struct platform_device yl9200_button_device = { .name = "gpio-keys", .id = -1, .num_resources = 0, .dev = { - .platform_data = &yl_9200_button_data, + .platform_data = &yl9200_button_data, } }; -static void __init yl_9200_add_device_buttons(void) +static void __init yl9200_add_device_buttons(void) { - //SW2 - at91_set_gpio_input(AT91_PIN_PA24, 0); + at91_set_gpio_input(AT91_PIN_PA24, 1); /* SW2 */ at91_set_deglitch(AT91_PIN_PA24, 1); - - //SW3 - at91_set_gpio_input(AT91_PIN_PB1, 0); + at91_set_gpio_input(AT91_PIN_PB1, 1); /* SW3 */ at91_set_deglitch(AT91_PIN_PB1, 1); - //SW4 - at91_set_gpio_input(AT91_PIN_PB2, 0); + at91_set_gpio_input(AT91_PIN_PB2, 1); /* SW4 */ at91_set_deglitch(AT91_PIN_PB2, 1); - - //SW5 - at91_set_gpio_input(AT91_PIN_PB6, 0); + at91_set_gpio_input(AT91_PIN_PB6, 1); /* SW5 */ at91_set_deglitch(AT91_PIN_PB6, 1); + /* Enable buttons (Sheet 5) */ + at91_set_gpio_output(AT91_PIN_PB7, 1); + + platform_device_register(&yl9200_button_device); +} +#else +static void __init yl9200_add_device_buttons(void) {} +#endif + +/* + * Touchscreen + */ +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +static int ads7843_pendown_state(void) +{ + return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */ +} + +static struct ads7846_platform_data ads_info = { + .model = 7843, + .x_min = 150, + .x_max = 3830, + .y_min = 190, + .y_max = 3830, + .vref_delay_usecs = 100, + + /* For a 8" touch-screen */ + // .x_plate_ohms = 603, + // .y_plate_ohms = 332, + + /* For a 10.4" touch-screen */ + // .x_plate_ohms = 611, + // .y_plate_ohms = 325, + + .x_plate_ohms = 576, + .y_plate_ohms = 366, + + .pressure_max = 15000, /* generally nonsense on the 7843 */ + .debounce_max = 1, + .debounce_rep = 0, + .debounce_tol = (~0), + .get_pendown_state = ads7843_pendown_state, +}; - at91_set_gpio_output(AT91_PIN_PB7, 1); /* #TURN BUTTONS ON, SHEET 5 of schematics */ - platform_device_register(&yl_9200_button_device); +static void __init yl9200_add_device_ts(void) +{ + at91_set_gpio_input(AT91_PIN_PB11, 1); /* Touchscreen interrupt pin */ + at91_set_gpio_input(AT91_PIN_PB10, 1); /* Touchscreen BUSY signal - not used! */ } #else -static void __init yl_9200_add_device_buttons(void) {} +static void __init yl9200_add_device_ts(void) {} +#endif + +/* + * SPI devices + */ +static struct spi_board_info yl9200_spi_devices[] = { +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + { /* Touchscreen */ + .modalias = "ads7846", + .chip_select = 0, + .max_speed_hz = 5000 * 26, + .platform_data = &ads_info, + .irq = AT91_PIN_PB11, + }, #endif + { /* CAN */ + .modalias = "mcp2510", + .chip_select = 1, + .max_speed_hz = 25000 * 26, + .irq = AT91_PIN_PC0, + } +}; +/* + * LCD / VGA + * + * EPSON S1D13806 FB (discontinued chip) + * EPSON S1D13506 FB + */ #if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE) #include , -- cgit v1.2.3 From 6802e3400ff4549525930ee744030c36fce9cc73 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Wed, 21 May 2008 17:03:22 +0100 Subject: [GFS2] Clean up the glock core This patch implements a number of cleanups to the core of the GFS2 glock code. As a result a lot of code is removed. It looks like a really big change, but actually a large part of this patch is either removing or moving existing code. There are some new bits too though, such as the new run_queue() function which is considerably streamlined. Highlights of this patch include: o Fixes a cluster coherency bug during SH -> EX lock conversions o Removes the "glmutex" code in favour of a single bit lock o Removes the ->go_xmote_bh() for inodes since it was duplicating ->go_lock() o We now only use the ->lm_lock() function for both locks and unlocks (i.e. unlock is a lock with target mode LM_ST_UNLOCKED) o The fast path is considerably shortly, giving performance gains especially with lock_nolock o The glock_workqueue is now used for all the callbacks from the DLM which allows us to simplify the lock_dlm module (see following patch) o The way is now open to make further changes such as eliminating the two threads (gfs2_glockd and gfs2_scand) in favour of a more efficient scheme. This patch has undergone extensive testing with various test suites so it should be pretty stable by now. Signed-off-by: Steven Whitehouse Cc: Bob Peterson --- fs/gfs2/glock.c | 1655 +++++++++++++++++------------------------ fs/gfs2/glock.h | 9 +- fs/gfs2/glops.c | 70 +- fs/gfs2/incore.h | 35 +- fs/gfs2/locking/dlm/lock.c | 3 + fs/gfs2/locking/nolock/main.c | 2 + fs/gfs2/main.c | 2 - fs/gfs2/meta_io.c | 14 +- fs/gfs2/meta_io.h | 1 + fs/gfs2/ops_address.c | 25 +- fs/gfs2/ops_file.c | 8 +- fs/gfs2/recovery.c | 2 +- fs/gfs2/super.c | 3 +- 13 files changed, 758 insertions(+), 1071 deletions(-) diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index d636b3e80f5d..519a54cc0b7b 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -45,21 +45,19 @@ struct gfs2_gl_hash_bucket { struct hlist_head hb_list; }; -struct glock_iter { - int hash; /* hash bucket index */ - struct gfs2_sbd *sdp; /* incore superblock */ - struct gfs2_glock *gl; /* current glock struct */ - struct seq_file *seq; /* sequence file for debugfs */ - char string[512]; /* scratch space */ +struct gfs2_glock_iter { + int hash; /* hash bucket index */ + struct gfs2_sbd *sdp; /* incore superblock */ + struct gfs2_glock *gl; /* current glock struct */ + char string[512]; /* scratch space */ }; typedef void (*glock_examiner) (struct gfs2_glock * gl); static int gfs2_dump_lockstate(struct gfs2_sbd *sdp); -static int dump_glock(struct glock_iter *gi, struct gfs2_glock *gl); -static void gfs2_glock_xmote_th(struct gfs2_glock *gl, struct gfs2_holder *gh); -static void gfs2_glock_drop_th(struct gfs2_glock *gl); -static void run_queue(struct gfs2_glock *gl); +static int __dump_glock(struct seq_file *seq, const struct gfs2_glock *gl); +#define GLOCK_BUG_ON(gl,x) do { if (unlikely(x)) { __dump_glock(NULL, gl); BUG(); } } while(0) +static void do_xmote(struct gfs2_glock *gl, struct gfs2_holder *gh, unsigned int target); static DECLARE_RWSEM(gfs2_umount_flush_sem); static struct dentry *gfs2_root; @@ -122,33 +120,6 @@ static inline rwlock_t *gl_lock_addr(unsigned int x) } #endif -/** - * relaxed_state_ok - is a requested lock compatible with the current lock mode? - * @actual: the current state of the lock - * @requested: the lock state that was requested by the caller - * @flags: the modifier flags passed in by the caller - * - * Returns: 1 if the locks are compatible, 0 otherwise - */ - -static inline int relaxed_state_ok(unsigned int actual, unsigned requested, - int flags) -{ - if (actual == requested) - return 1; - - if (flags & GL_EXACT) - return 0; - - if (actual == LM_ST_EXCLUSIVE && requested == LM_ST_SHARED) - return 1; - - if (actual != LM_ST_UNLOCKED && (flags & LM_FLAG_ANY)) - return 1; - - return 0; -} - /** * gl_hash() - Turn glock number into hash bucket number * @lock: The glock number @@ -211,17 +182,14 @@ static void gfs2_glock_hold(struct gfs2_glock *gl) int gfs2_glock_put(struct gfs2_glock *gl) { int rv = 0; - struct gfs2_sbd *sdp = gl->gl_sbd; write_lock(gl_lock_addr(gl->gl_hash)); if (atomic_dec_and_test(&gl->gl_ref)) { hlist_del(&gl->gl_list); write_unlock(gl_lock_addr(gl->gl_hash)); - gfs2_assert(sdp, gl->gl_state == LM_ST_UNLOCKED); - gfs2_assert(sdp, list_empty(&gl->gl_reclaim)); - gfs2_assert(sdp, list_empty(&gl->gl_holders)); - gfs2_assert(sdp, list_empty(&gl->gl_waiters1)); - gfs2_assert(sdp, list_empty(&gl->gl_waiters3)); + GLOCK_BUG_ON(gl, gl->gl_state != LM_ST_UNLOCKED); + GLOCK_BUG_ON(gl, !list_empty(&gl->gl_reclaim)); + GLOCK_BUG_ON(gl, !list_empty(&gl->gl_holders)); glock_free(gl); rv = 1; goto out; @@ -281,16 +249,382 @@ static struct gfs2_glock *gfs2_glock_find(const struct gfs2_sbd *sdp, return gl; } +/** + * may_grant - check if its ok to grant a new lock + * @gl: The glock + * @gh: The lock request which we wish to grant + * + * Returns: true if its ok to grant the lock + */ + +static inline int may_grant(const struct gfs2_glock *gl, const struct gfs2_holder *gh) +{ + const struct gfs2_holder *gh_head = list_entry(gl->gl_holders.next, const struct gfs2_holder, gh_list); + if ((gh->gh_state == LM_ST_EXCLUSIVE || + gh_head->gh_state == LM_ST_EXCLUSIVE) && gh != gh_head) + return 0; + if (gl->gl_state == gh->gh_state) + return 1; + if (gh->gh_flags & GL_EXACT) + return 0; + if (gh->gh_state == LM_ST_SHARED && gl->gl_state == LM_ST_EXCLUSIVE) + return 1; + if (gl->gl_state != LM_ST_UNLOCKED && (gh->gh_flags & LM_FLAG_ANY)) + return 1; + return 0; +} + +static void gfs2_holder_wake(struct gfs2_holder *gh) +{ + clear_bit(HIF_WAIT, &gh->gh_iflags); + smp_mb__after_clear_bit(); + wake_up_bit(&gh->gh_iflags, HIF_WAIT); +} + +/** + * do_promote - promote as many requests as possible on the current queue + * @gl: The glock + * + * Returns: true if there is a blocked holder at the head of the list + */ + +static int do_promote(struct gfs2_glock *gl) +{ + const struct gfs2_glock_operations *glops = gl->gl_ops; + struct gfs2_holder *gh, *tmp; + int ret; + +restart: + list_for_each_entry_safe(gh, tmp, &gl->gl_holders, gh_list) { + if (test_bit(HIF_HOLDER, &gh->gh_iflags)) + continue; + if (may_grant(gl, gh)) { + if (gh->gh_list.prev == &gl->gl_holders && + glops->go_lock) { + spin_unlock(&gl->gl_spin); + /* FIXME: eliminate this eventually */ + ret = glops->go_lock(gh); + spin_lock(&gl->gl_spin); + if (ret) { + gh->gh_error = ret; + list_del_init(&gh->gh_list); + gfs2_holder_wake(gh); + goto restart; + } + set_bit(HIF_HOLDER, &gh->gh_iflags); + gfs2_holder_wake(gh); + goto restart; + } + set_bit(HIF_HOLDER, &gh->gh_iflags); + gfs2_holder_wake(gh); + continue; + } + if (gh->gh_list.prev == &gl->gl_holders) + return 1; + break; + } + return 0; +} + +/** + * do_error - Something unexpected has happened during a lock request + * + */ + +static inline void do_error(struct gfs2_glock *gl, const int ret) +{ + struct gfs2_holder *gh, *tmp; + + list_for_each_entry_safe(gh, tmp, &gl->gl_holders, gh_list) { + if (test_bit(HIF_HOLDER, &gh->gh_iflags)) + continue; + if (ret & LM_OUT_ERROR) + gh->gh_error = -EIO; + else if (gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)) + gh->gh_error = GLR_TRYFAILED; + else + continue; + list_del_init(&gh->gh_list); + gfs2_holder_wake(gh); + } +} + +/** + * find_first_waiter - find the first gh that's waiting for the glock + * @gl: the glock + */ + +static inline struct gfs2_holder *find_first_waiter(const struct gfs2_glock *gl) +{ + struct gfs2_holder *gh; + + list_for_each_entry(gh, &gl->gl_holders, gh_list) { + if (!test_bit(HIF_HOLDER, &gh->gh_iflags)) + return gh; + } + return NULL; +} + +/** + * state_change - record that the glock is now in a different state + * @gl: the glock + * @new_state the new state + * + */ + +static void state_change(struct gfs2_glock *gl, unsigned int new_state) +{ + int held1, held2; + + held1 = (gl->gl_state != LM_ST_UNLOCKED); + held2 = (new_state != LM_ST_UNLOCKED); + + if (held1 != held2) { + if (held2) + gfs2_glock_hold(gl); + else + gfs2_glock_put(gl); + } + + gl->gl_state = new_state; + gl->gl_tchange = jiffies; +} + +static void gfs2_demote_wake(struct gfs2_glock *gl) +{ + gl->gl_demote_state = LM_ST_EXCLUSIVE; + clear_bit(GLF_DEMOTE, &gl->gl_flags); + smp_mb__after_clear_bit(); + wake_up_bit(&gl->gl_flags, GLF_DEMOTE); +} + +/** + * finish_xmote - The DLM has replied to one of our lock requests + * @gl: The glock + * @ret: The status from the DLM + * + */ + +static void finish_xmote(struct gfs2_glock *gl, unsigned int ret) +{ + const struct gfs2_glock_operations *glops = gl->gl_ops; + struct gfs2_holder *gh; + unsigned state = ret & LM_OUT_ST_MASK; + + spin_lock(&gl->gl_spin); + state_change(gl, state); + gh = find_first_waiter(gl); + + /* Demote to UN request arrived during demote to SH or DF */ + if (test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags) && + state != LM_ST_UNLOCKED && gl->gl_demote_state == LM_ST_UNLOCKED) + gl->gl_target = LM_ST_UNLOCKED; + + /* Check for state != intended state */ + if (unlikely(state != gl->gl_target)) { + if (gh && !test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags)) { + /* move to back of queue and try next entry */ + if (ret & LM_OUT_CANCELED) { + if ((gh->gh_flags & LM_FLAG_PRIORITY) == 0) + list_move_tail(&gh->gh_list, &gl->gl_holders); + gh = find_first_waiter(gl); + gl->gl_target = gh->gh_state; + goto retry; + } + /* Some error or failed "try lock" - report it */ + if ((ret & LM_OUT_ERROR) || + (gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))) { + gl->gl_target = gl->gl_state; + do_error(gl, ret); + goto out; + } + } + switch(state) { + /* Unlocked due to conversion deadlock, try again */ + case LM_ST_UNLOCKED: +retry: + do_xmote(gl, gh, gl->gl_target); + break; + /* Conversion fails, unlock and try again */ + case LM_ST_SHARED: + case LM_ST_DEFERRED: + do_xmote(gl, gh, LM_ST_UNLOCKED); + break; + default: /* Everything else */ + printk(KERN_ERR "GFS2: wanted %u got %u\n", gl->gl_target, state); + GLOCK_BUG_ON(gl, 1); + } + spin_unlock(&gl->gl_spin); + gfs2_glock_put(gl); + return; + } + + /* Fast path - we got what we asked for */ + if (test_and_clear_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags)) + gfs2_demote_wake(gl); + if (state != LM_ST_UNLOCKED) { + if (glops->go_xmote_bh) { + int rv; + spin_unlock(&gl->gl_spin); + rv = glops->go_xmote_bh(gl, gh); + if (rv == -EAGAIN) + return; + spin_lock(&gl->gl_spin); + if (rv) { + do_error(gl, rv); + goto out; + } + } + do_promote(gl); + } +out: + clear_bit(GLF_LOCK, &gl->gl_flags); + spin_unlock(&gl->gl_spin); + gfs2_glock_put(gl); +} + +static unsigned int gfs2_lm_lock(struct gfs2_sbd *sdp, void *lock, + unsigned int cur_state, unsigned int req_state, + unsigned int flags) +{ + int ret = LM_OUT_ERROR; + if (likely(!test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) + ret = sdp->sd_lockstruct.ls_ops->lm_lock(lock, cur_state, + req_state, flags); + return ret; +} + +/** + * do_xmote - Calls the DLM to change the state of a lock + * @gl: The lock state + * @gh: The holder (only for promotes) + * @target: The target lock state + * + */ + +static void do_xmote(struct gfs2_glock *gl, struct gfs2_holder *gh, unsigned int target) +{ + const struct gfs2_glock_operations *glops = gl->gl_ops; + struct gfs2_sbd *sdp = gl->gl_sbd; + unsigned int lck_flags = gh ? gh->gh_flags : 0; + int ret; + + lck_flags &= (LM_FLAG_TRY | LM_FLAG_TRY_1CB | LM_FLAG_NOEXP | + LM_FLAG_PRIORITY); + BUG_ON(gl->gl_state == target); + BUG_ON(gl->gl_state == gl->gl_target); + if ((target == LM_ST_UNLOCKED || target == LM_ST_DEFERRED) && + glops->go_inval) { + set_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags); + do_error(gl, 0); /* Fail queued try locks */ + } + spin_unlock(&gl->gl_spin); + if (glops->go_xmote_th) + glops->go_xmote_th(gl); + if (test_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags)) + glops->go_inval(gl, target == LM_ST_DEFERRED ? 0 : DIO_METADATA); + clear_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags); + + gfs2_glock_hold(gl); + if (target != LM_ST_UNLOCKED && (gl->gl_state == LM_ST_SHARED || + gl->gl_state == LM_ST_DEFERRED) && + !(lck_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))) + lck_flags |= LM_FLAG_TRY_1CB; + ret = gfs2_lm_lock(sdp, gl->gl_lock, gl->gl_state, target, lck_flags); + + if (!(ret & LM_OUT_ASYNC)) { + finish_xmote(gl, ret); + gfs2_glock_hold(gl); + if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0) + gfs2_glock_put(gl); + } else { + GLOCK_BUG_ON(gl, ret != LM_OUT_ASYNC); + } + spin_lock(&gl->gl_spin); +} + +/** + * find_first_holder - find the first "holder" gh + * @gl: the glock + */ + +static inline struct gfs2_holder *find_first_holder(const struct gfs2_glock *gl) +{ + struct gfs2_holder *gh; + + if (!list_empty(&gl->gl_holders)) { + gh = list_entry(gl->gl_holders.next, struct gfs2_holder, gh_list); + if (test_bit(HIF_HOLDER, &gh->gh_iflags)) + return gh; + } + return NULL; +} + +/** + * run_queue - do all outstanding tasks related to a glock + * @gl: The glock in question + * @nonblock: True if we must not block in run_queue + * + */ + +static void run_queue(struct gfs2_glock *gl, const int nonblock) +{ + struct gfs2_holder *gh = NULL; + + if (test_and_set_bit(GLF_LOCK, &gl->gl_flags)) + return; + + GLOCK_BUG_ON(gl, test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags)); + + if (test_bit(GLF_DEMOTE, &gl->gl_flags) && + gl->gl_demote_state != gl->gl_state) { + if (find_first_holder(gl)) + goto out; + if (nonblock) + goto out_sched; + set_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags); + gl->gl_target = gl->gl_demote_state; + } else { + if (test_bit(GLF_DEMOTE, &gl->gl_flags)) + gfs2_demote_wake(gl); + if (do_promote(gl) == 0) + goto out; + gh = find_first_waiter(gl); + gl->gl_target = gh->gh_state; + if (!(gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB))) + do_error(gl, 0); /* Fail queued try locks */ + } + do_xmote(gl, gh, gl->gl_target); + return; + +out_sched: + gfs2_glock_hold(gl); + if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0) + gfs2_glock_put(gl); +out: + clear_bit(GLF_LOCK, &gl->gl_flags); +} + static void glock_work_func(struct work_struct *work) { + unsigned long delay = 0; struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_work.work); + if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) + finish_xmote(gl, gl->gl_reply); spin_lock(&gl->gl_spin); - if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags)) - set_bit(GLF_DEMOTE, &gl->gl_flags); - run_queue(gl); + if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags)) { + unsigned long holdtime, now = jiffies; + holdtime = gl->gl_tchange + gl->gl_ops->go_min_hold_time; + if (time_before(now, holdtime)) + delay = holdtime - now; + set_bit(delay ? GLF_PENDING_DEMOTE : GLF_DEMOTE, &gl->gl_flags); + } + run_queue(gl, 0); spin_unlock(&gl->gl_spin); - gfs2_glock_put(gl); + if (!delay || + queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0) + gfs2_glock_put(gl); } static int gfs2_lm_get_lock(struct gfs2_sbd *sdp, struct lm_lockname *name, @@ -342,12 +676,10 @@ int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number, gl->gl_name = name; atomic_set(&gl->gl_ref, 1); gl->gl_state = LM_ST_UNLOCKED; + gl->gl_target = LM_ST_UNLOCKED; gl->gl_demote_state = LM_ST_EXCLUSIVE; gl->gl_hash = hash; - gl->gl_owner_pid = NULL; - gl->gl_ip = 0; gl->gl_ops = glops; - gl->gl_req_gh = NULL; gl->gl_stamp = jiffies; gl->gl_tchange = jiffies; gl->gl_object = NULL; @@ -447,656 +779,77 @@ void gfs2_holder_uninit(struct gfs2_holder *gh) gh->gh_ip = 0; } -static void gfs2_holder_wake(struct gfs2_holder *gh) -{ - clear_bit(HIF_WAIT, &gh->gh_iflags); - smp_mb__after_clear_bit(); - wake_up_bit(&gh->gh_iflags, HIF_WAIT); -} - static int just_schedule(void *word) { schedule(); return 0; } -static void wait_on_holder(struct gfs2_holder *gh) -{ - might_sleep(); - wait_on_bit(&gh->gh_iflags, HIF_WAIT, just_schedule, TASK_UNINTERRUPTIBLE); -} - -static void gfs2_demote_wake(struct gfs2_glock *gl) -{ - gl->gl_demote_state = LM_ST_EXCLUSIVE; - clear_bit(GLF_DEMOTE, &gl->gl_flags); - smp_mb__after_clear_bit(); - wake_up_bit(&gl->gl_flags, GLF_DEMOTE); -} - -static void wait_on_demote(struct gfs2_glock *gl) -{ - might_sleep(); - wait_on_bit(&gl->gl_flags, GLF_DEMOTE, just_schedule, TASK_UNINTERRUPTIBLE); -} - -/** - * rq_mutex - process a mutex request in the queue - * @gh: the glock holder - * - * Returns: 1 if the queue is blocked - */ - -static int rq_mutex(struct gfs2_holder *gh) -{ - struct gfs2_glock *gl = gh->gh_gl; - - list_del_init(&gh->gh_list); - /* gh->gh_error never examined. */ - set_bit(GLF_LOCK, &gl->gl_flags); - clear_bit(HIF_WAIT, &gh->gh_iflags); - smp_mb(); - wake_up_bit(&gh->gh_iflags, HIF_WAIT); - - return 1; -} - -/** - * rq_promote - process a promote request in the queue - * @gh: the glock holder - * - * Acquire a new inter-node lock, or change a lock state to more restrictive. - * - * Returns: 1 if the queue is blocked - */ - -static int rq_promote(struct gfs2_holder *gh) -{ - struct gfs2_glock *gl = gh->gh_gl; - - if (!relaxed_state_ok(gl->gl_state, gh->gh_state, gh->gh_flags)) { - if (list_empty(&gl->gl_holders)) { - gl->gl_req_gh = gh; - set_bit(GLF_LOCK, &gl->gl_flags); - spin_unlock(&gl->gl_spin); - gfs2_glock_xmote_th(gh->gh_gl, gh); - spin_lock(&gl->gl_spin); - } - return 1; - } - - if (list_empty(&gl->gl_holders)) { - set_bit(HIF_FIRST, &gh->gh_iflags); - set_bit(GLF_LOCK, &gl->gl_flags); - } else { - struct gfs2_holder *next_gh; - if (gh->gh_state == LM_ST_EXCLUSIVE) - return 1; - next_gh = list_entry(gl->gl_holders.next, struct gfs2_holder, - gh_list); - if (next_gh->gh_state == LM_ST_EXCLUSIVE) - return 1; - } - - list_move_tail(&gh->gh_list, &gl->gl_holders); - gh->gh_error = 0; - set_bit(HIF_HOLDER, &gh->gh_iflags); - - gfs2_holder_wake(gh); - - return 0; -} - -/** - * rq_demote - process a demote request in the queue - * @gh: the glock holder - * - * Returns: 1 if the queue is blocked - */ - -static int rq_demote(struct gfs2_glock *gl) -{ - if (!list_empty(&gl->gl_holders)) - return 1; - - if (gl->gl_state == gl->gl_demote_state || - gl->gl_state == LM_ST_UNLOCKED) { - gfs2_demote_wake(gl); - return 0; - } - - set_bit(GLF_LOCK, &gl->gl_flags); - set_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags); - - if (gl->gl_demote_state == LM_ST_UNLOCKED || - gl->gl_state != LM_ST_EXCLUSIVE) { - spin_unlock(&gl->gl_spin); - gfs2_glock_drop_th(gl); - } else { - spin_unlock(&gl->gl_spin); - gfs2_glock_xmote_th(gl, NULL); - } - - spin_lock(&gl->gl_spin); - clear_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags); - - return 0; -} - -/** - * run_queue - process holder structures on a glock - * @gl: the glock - * - */ -static void run_queue(struct gfs2_glock *gl) -{ - struct gfs2_holder *gh; - int blocked = 1; - - for (;;) { - if (test_bit(GLF_LOCK, &gl->gl_flags)) - break; - - if (!list_empty(&gl->gl_waiters1)) { - gh = list_entry(gl->gl_waiters1.next, - struct gfs2_holder, gh_list); - blocked = rq_mutex(gh); - } else if (test_bit(GLF_DEMOTE, &gl->gl_flags)) { - blocked = rq_demote(gl); - if (test_bit(GLF_WAITERS2, &gl->gl_flags) && - !blocked) { - set_bit(GLF_DEMOTE, &gl->gl_flags); - gl->gl_demote_state = LM_ST_UNLOCKED; - } - clear_bit(GLF_WAITERS2, &gl->gl_flags); - } else if (!list_empty(&gl->gl_waiters3)) { - gh = list_entry(gl->gl_waiters3.next, - struct gfs2_holder, gh_list); - blocked = rq_promote(gh); - } else - break; - - if (blocked) - break; - } -} - -/** - * gfs2_glmutex_lock - acquire a local lock on a glock - * @gl: the glock - * - * Gives caller exclusive access to manipulate a glock structure. - */ - -static void gfs2_glmutex_lock(struct gfs2_glock *gl) -{ - spin_lock(&gl->gl_spin); - if (test_and_set_bit(GLF_LOCK, &gl->gl_flags)) { - struct gfs2_holder gh; - - gfs2_holder_init(gl, 0, 0, &gh); - set_bit(HIF_WAIT, &gh.gh_iflags); - list_add_tail(&gh.gh_list, &gl->gl_waiters1); - spin_unlock(&gl->gl_spin); - wait_on_holder(&gh); - gfs2_holder_uninit(&gh); - } else { - gl->gl_owner_pid = get_pid(task_pid(current)); - gl->gl_ip = (unsigned long)__builtin_return_address(0); - spin_unlock(&gl->gl_spin); - } -} - -/** - * gfs2_glmutex_trylock - try to acquire a local lock on a glock - * @gl: the glock - * - * Returns: 1 if the glock is acquired - */ - -static int gfs2_glmutex_trylock(struct gfs2_glock *gl) -{ - int acquired = 1; - - spin_lock(&gl->gl_spin); - if (test_and_set_bit(GLF_LOCK, &gl->gl_flags)) { - acquired = 0; - } else { - gl->gl_owner_pid = get_pid(task_pid(current)); - gl->gl_ip = (unsigned long)__builtin_return_address(0); - } - spin_unlock(&gl->gl_spin); - - return acquired; -} - -/** - * gfs2_glmutex_unlock - release a local lock on a glock - * @gl: the glock - * - */ - -static void gfs2_glmutex_unlock(struct gfs2_glock *gl) -{ - struct pid *pid; - - spin_lock(&gl->gl_spin); - clear_bit(GLF_LOCK, &gl->gl_flags); - pid = gl->gl_owner_pid; - gl->gl_owner_pid = NULL; - gl->gl_ip = 0; - run_queue(gl); - spin_unlock(&gl->gl_spin); - - put_pid(pid); -} - -/** - * handle_callback - process a demote request - * @gl: the glock - * @state: the state the caller wants us to change to - * - * There are only two requests that we are going to see in actual - * practise: LM_ST_SHARED and LM_ST_UNLOCKED - */ - -static void handle_callback(struct gfs2_glock *gl, unsigned int state, - int remote, unsigned long delay) -{ - int bit = delay ? GLF_PENDING_DEMOTE : GLF_DEMOTE; - - spin_lock(&gl->gl_spin); - set_bit(bit, &gl->gl_flags); - if (gl->gl_demote_state == LM_ST_EXCLUSIVE) { - gl->gl_demote_state = state; - gl->gl_demote_time = jiffies; - if (remote && gl->gl_ops->go_type == LM_TYPE_IOPEN && - gl->gl_object) { - gfs2_glock_schedule_for_reclaim(gl); - spin_unlock(&gl->gl_spin); - return; - } - } else if (gl->gl_demote_state != LM_ST_UNLOCKED && - gl->gl_demote_state != state) { - if (test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags)) - set_bit(GLF_WAITERS2, &gl->gl_flags); - else - gl->gl_demote_state = LM_ST_UNLOCKED; - } - spin_unlock(&gl->gl_spin); -} - -/** - * state_change - record that the glock is now in a different state - * @gl: the glock - * @new_state the new state - * - */ - -static void state_change(struct gfs2_glock *gl, unsigned int new_state) -{ - int held1, held2; - - held1 = (gl->gl_state != LM_ST_UNLOCKED); - held2 = (new_state != LM_ST_UNLOCKED); - - if (held1 != held2) { - if (held2) - gfs2_glock_hold(gl); - else - gfs2_glock_put(gl); - } - - gl->gl_state = new_state; - gl->gl_tchange = jiffies; -} - -/** - * drop_bh - Called after a lock module unlock completes - * @gl: the glock - * @ret: the return status - * - * Doesn't wake up the process waiting on the struct gfs2_holder (if any) - * Doesn't drop the reference on the glock the top half took out - * - */ - -static void drop_bh(struct gfs2_glock *gl, unsigned int ret) -{ - struct gfs2_sbd *sdp = gl->gl_sbd; - struct gfs2_holder *gh = gl->gl_req_gh; - - gfs2_assert_warn(sdp, test_bit(GLF_LOCK, &gl->gl_flags)); - gfs2_assert_warn(sdp, list_empty(&gl->gl_holders)); - gfs2_assert_warn(sdp, !ret); - - state_change(gl, LM_ST_UNLOCKED); - - if (test_and_clear_bit(GLF_CONV_DEADLK, &gl->gl_flags)) { - spin_lock(&gl->gl_spin); - gh->gh_error = 0; - spin_unlock(&gl->gl_spin); - gfs2_glock_xmote_th(gl, gl->gl_req_gh); - gfs2_glock_put(gl); - return; - } - - spin_lock(&gl->gl_spin); - gfs2_demote_wake(gl); - clear_bit(GLF_LOCK, &gl->gl_flags); - spin_unlock(&gl->gl_spin); - gfs2_glock_put(gl); -} - -/** - * xmote_bh - Called after the lock module is done acquiring a lock - * @gl: The glock in question - * @ret: the int returned from the lock module - * - */ - -static void xmote_bh(struct gfs2_glock *gl, unsigned int ret) -{ - struct gfs2_sbd *sdp = gl->gl_sbd; - const struct gfs2_glock_operations *glops = gl->gl_ops; - struct gfs2_holder *gh = gl->gl_req_gh; - int op_done = 1; - - if (!gh && (ret & LM_OUT_ST_MASK) == LM_ST_UNLOCKED) { - drop_bh(gl, ret); - return; - } - - gfs2_assert_warn(sdp, test_bit(GLF_LOCK, &gl->gl_flags)); - gfs2_assert_warn(sdp, list_empty(&gl->gl_holders)); - gfs2_assert_warn(sdp, !(ret & LM_OUT_ASYNC)); - - state_change(gl, ret & LM_OUT_ST_MASK); - - /* Deal with each possible exit condition */ - - if (!gh) { - gl->gl_stamp = jiffies; - if (ret & LM_OUT_CANCELED) { - op_done = 0; - } else { - spin_lock(&gl->gl_spin); - if (gl->gl_state != gl->gl_demote_state) { - spin_unlock(&gl->gl_spin); - gfs2_glock_drop_th(gl); - gfs2_glock_put(gl); - return; - } - gfs2_demote_wake(gl); - spin_unlock(&gl->gl_spin); - } - } else { - spin_lock(&gl->gl_spin); - if (ret & LM_OUT_CONV_DEADLK) { - gh->gh_error = 0; - set_bit(GLF_CONV_DEADLK, &gl->gl_flags); - spin_unlock(&gl->gl_spin); - gfs2_glock_drop_th(gl); - gfs2_glock_put(gl); - return; - } - list_del_init(&gh->gh_list); - gh->gh_error = -EIO; - if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) - goto out; - gh->gh_error = GLR_CANCELED; - if (ret & LM_OUT_CANCELED) - goto out; - if (relaxed_state_ok(gl->gl_state, gh->gh_state, gh->gh_flags)) { - list_add_tail(&gh->gh_list, &gl->gl_holders); - gh->gh_error = 0; - set_bit(HIF_HOLDER, &gh->gh_iflags); - set_bit(HIF_FIRST, &gh->gh_iflags); - op_done = 0; - goto out; - } - gh->gh_error = GLR_TRYFAILED; - if (gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)) - goto out; - gh->gh_error = -EINVAL; - if (gfs2_assert_withdraw(sdp, 0) == -1) - fs_err(sdp, "ret = 0x%.8X\n", ret); -out: - spin_unlock(&gl->gl_spin); - } - - if (glops->go_xmote_bh) - glops->go_xmote_bh(gl); - - if (op_done) { - spin_lock(&gl->gl_spin); - gl->gl_req_gh = NULL; - clear_bit(GLF_LOCK, &gl->gl_flags); - spin_unlock(&gl->gl_spin); - } - - gfs2_glock_put(gl); - - if (gh) - gfs2_holder_wake(gh); -} - -static unsigned int gfs2_lm_lock(struct gfs2_sbd *sdp, void *lock, - unsigned int cur_state, unsigned int req_state, - unsigned int flags) -{ - int ret = 0; - if (likely(!test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) - ret = sdp->sd_lockstruct.ls_ops->lm_lock(lock, cur_state, - req_state, flags); - return ret; -} - -/** - * gfs2_glock_xmote_th - Call into the lock module to acquire or change a glock - * @gl: The glock in question - * @state: the requested state - * @flags: modifier flags to the lock call - * - */ - -static void gfs2_glock_xmote_th(struct gfs2_glock *gl, struct gfs2_holder *gh) -{ - struct gfs2_sbd *sdp = gl->gl_sbd; - int flags = gh ? gh->gh_flags : 0; - unsigned state = gh ? gh->gh_state : gl->gl_demote_state; - const struct gfs2_glock_operations *glops = gl->gl_ops; - int lck_flags = flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB | - LM_FLAG_NOEXP | LM_FLAG_ANY | - LM_FLAG_PRIORITY); - unsigned int lck_ret; - - if (glops->go_xmote_th) - glops->go_xmote_th(gl); - if (state == LM_ST_DEFERRED && glops->go_inval) - glops->go_inval(gl, DIO_METADATA); - - gfs2_assert_warn(sdp, test_bit(GLF_LOCK, &gl->gl_flags)); - gfs2_assert_warn(sdp, list_empty(&gl->gl_holders)); - gfs2_assert_warn(sdp, state != LM_ST_UNLOCKED); - gfs2_assert_warn(sdp, state != gl->gl_state); - - gfs2_glock_hold(gl); - - lck_ret = gfs2_lm_lock(sdp, gl->gl_lock, gl->gl_state, state, lck_flags); - - if (gfs2_assert_withdraw(sdp, !(lck_ret & LM_OUT_ERROR))) - return; - - if (lck_ret & LM_OUT_ASYNC) - gfs2_assert_warn(sdp, lck_ret == LM_OUT_ASYNC); - else - xmote_bh(gl, lck_ret); -} - -static unsigned int gfs2_lm_unlock(struct gfs2_sbd *sdp, void *lock, - unsigned int cur_state) +static void wait_on_holder(struct gfs2_holder *gh) { - int ret = 0; - if (likely(!test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) - ret = sdp->sd_lockstruct.ls_ops->lm_unlock(lock, cur_state); - return ret; + might_sleep(); + wait_on_bit(&gh->gh_iflags, HIF_WAIT, just_schedule, TASK_UNINTERRUPTIBLE); } -/** - * gfs2_glock_drop_th - call into the lock module to unlock a lock - * @gl: the glock - * - */ - -static void gfs2_glock_drop_th(struct gfs2_glock *gl) +static void wait_on_demote(struct gfs2_glock *gl) { - struct gfs2_sbd *sdp = gl->gl_sbd; - const struct gfs2_glock_operations *glops = gl->gl_ops; - unsigned int ret; - - if (glops->go_xmote_th) - glops->go_xmote_th(gl); - if (glops->go_inval) - glops->go_inval(gl, DIO_METADATA); - - gfs2_assert_warn(sdp, test_bit(GLF_LOCK, &gl->gl_flags)); - gfs2_assert_warn(sdp, list_empty(&gl->gl_holders)); - gfs2_assert_warn(sdp, gl->gl_state != LM_ST_UNLOCKED); - - gfs2_glock_hold(gl); - - ret = gfs2_lm_unlock(sdp, gl->gl_lock, gl->gl_state); - - if (gfs2_assert_withdraw(sdp, !(ret & LM_OUT_ERROR))) - return; - - if (!ret) - drop_bh(gl, ret); - else - gfs2_assert_warn(sdp, ret == LM_OUT_ASYNC); + might_sleep(); + wait_on_bit(&gl->gl_flags, GLF_DEMOTE, just_schedule, TASK_UNINTERRUPTIBLE); } /** - * do_cancels - cancel requests for locks stuck waiting on an expire flag - * @gh: the LM_FLAG_PRIORITY holder waiting to acquire the lock + * handle_callback - process a demote request + * @gl: the glock + * @state: the state the caller wants us to change to * - * Don't cancel GL_NOCANCEL requests. + * There are only two requests that we are going to see in actual + * practise: LM_ST_SHARED and LM_ST_UNLOCKED */ -static void do_cancels(struct gfs2_holder *gh) +static void handle_callback(struct gfs2_glock *gl, unsigned int state, + int remote, unsigned long delay) { - struct gfs2_glock *gl = gh->gh_gl; - struct gfs2_sbd *sdp = gl->gl_sbd; - - spin_lock(&gl->gl_spin); + int bit = delay ? GLF_PENDING_DEMOTE : GLF_DEMOTE; - while (gl->gl_req_gh != gh && - !test_bit(HIF_HOLDER, &gh->gh_iflags) && - !list_empty(&gh->gh_list)) { - if (!(gl->gl_req_gh && (gl->gl_req_gh->gh_flags & GL_NOCANCEL))) { - spin_unlock(&gl->gl_spin); - if (likely(!test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) - sdp->sd_lockstruct.ls_ops->lm_cancel(gl->gl_lock); - msleep(100); - spin_lock(&gl->gl_spin); - } else { - spin_unlock(&gl->gl_spin); - msleep(100); - spin_lock(&gl->gl_spin); - } + set_bit(bit, &gl->gl_flags); + if (gl->gl_demote_state == LM_ST_EXCLUSIVE) { + gl->gl_demote_state = state; + gl->gl_demote_time = jiffies; + if (remote && gl->gl_ops->go_type == LM_TYPE_IOPEN && + gl->gl_object) + gfs2_glock_schedule_for_reclaim(gl); + } else if (gl->gl_demote_state != LM_ST_UNLOCKED && + gl->gl_demote_state != state) { + gl->gl_demote_state = LM_ST_UNLOCKED; } - - spin_unlock(&gl->gl_spin); } /** - * glock_wait_internal - wait on a glock acquisition + * gfs2_glock_wait - wait on a glock acquisition * @gh: the glock holder * * Returns: 0 on success */ -static int glock_wait_internal(struct gfs2_holder *gh) +int gfs2_glock_wait(struct gfs2_holder *gh) { - struct gfs2_glock *gl = gh->gh_gl; - struct gfs2_sbd *sdp = gl->gl_sbd; - const struct gfs2_glock_operations *glops = gl->gl_ops; - - if (test_bit(HIF_ABORTED, &gh->gh_iflags)) - return -EIO; - - if (gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)) { - spin_lock(&gl->gl_spin); - if (gl->gl_req_gh != gh && - !test_bit(HIF_HOLDER, &gh->gh_iflags) && - !list_empty(&gh->gh_list)) { - list_del_init(&gh->gh_list); - gh->gh_error = GLR_TRYFAILED; - run_queue(gl); - spin_unlock(&gl->gl_spin); - return gh->gh_error; - } - spin_unlock(&gl->gl_spin); - } - - if (gh->gh_flags & LM_FLAG_PRIORITY) - do_cancels(gh); - wait_on_holder(gh); - if (gh->gh_error) - return gh->gh_error; - - gfs2_assert_withdraw(sdp, test_bit(HIF_HOLDER, &gh->gh_iflags)); - gfs2_assert_withdraw(sdp, relaxed_state_ok(gl->gl_state, gh->gh_state, - gh->gh_flags)); - - if (test_bit(HIF_FIRST, &gh->gh_iflags)) { - gfs2_assert_warn(sdp, test_bit(GLF_LOCK, &gl->gl_flags)); - - if (glops->go_lock) { - gh->gh_error = glops->go_lock(gh); - if (gh->gh_error) { - spin_lock(&gl->gl_spin); - list_del_init(&gh->gh_list); - spin_unlock(&gl->gl_spin); - } - } - - spin_lock(&gl->gl_spin); - gl->gl_req_gh = NULL; - clear_bit(GLF_LOCK, &gl->gl_flags); - run_queue(gl); - spin_unlock(&gl->gl_spin); - } - return gh->gh_error; } -static inline struct gfs2_holder * -find_holder_by_owner(struct list_head *head, struct pid *pid) -{ - struct gfs2_holder *gh; - - list_for_each_entry(gh, head, gh_list) { - if (gh->gh_owner_pid == pid) - return gh; - } - - return NULL; -} - -static void print_dbg(struct glock_iter *gi, const char *fmt, ...) +void gfs2_print_dbg(struct seq_file *seq, const char *fmt, ...) { va_list args; va_start(args, fmt); - if (gi) { + if (seq) { + struct gfs2_glock_iter *gi = seq->private; vsprintf(gi->string, fmt, args); - seq_printf(gi->seq, gi->string); - } - else + seq_printf(seq, gi->string); + } else { + printk(KERN_ERR " "); vprintk(fmt, args); + } va_end(args); } @@ -1104,50 +857,75 @@ static void print_dbg(struct glock_iter *gi, const char *fmt, ...) * add_to_queue - Add a holder to the wait queue (but look for recursion) * @gh: the holder structure to add * + * Eventually we should move the recursive locking trap to a + * debugging option or something like that. This is the fast + * path and needs to have the minimum number of distractions. + * */ -static void add_to_queue(struct gfs2_holder *gh) +static inline void add_to_queue(struct gfs2_holder *gh) { struct gfs2_glock *gl = gh->gh_gl; - struct gfs2_holder *existing; + struct gfs2_sbd *sdp = gl->gl_sbd; + struct list_head *insert_pt = NULL; + struct gfs2_holder *gh2; + int try_lock = 0; BUG_ON(gh->gh_owner_pid == NULL); if (test_and_set_bit(HIF_WAIT, &gh->gh_iflags)) BUG(); - if (!(gh->gh_flags & GL_FLOCK)) { - existing = find_holder_by_owner(&gl->gl_holders, - gh->gh_owner_pid); - if (existing) { - print_symbol(KERN_WARNING "original: %s\n", - existing->gh_ip); - printk(KERN_INFO "pid : %d\n", - pid_nr(existing->gh_owner_pid)); - printk(KERN_INFO "lock type : %d lock state : %d\n", - existing->gh_gl->gl_name.ln_type, - existing->gh_gl->gl_state); - print_symbol(KERN_WARNING "new: %s\n", gh->gh_ip); - printk(KERN_INFO "pid : %d\n", - pid_nr(gh->gh_owner_pid)); - printk(KERN_INFO "lock type : %d lock state : %d\n", - gl->gl_name.ln_type, gl->gl_state); - BUG(); - } - - existing = find_holder_by_owner(&gl->gl_waiters3, - gh->gh_owner_pid); - if (existing) { - print_symbol(KERN_WARNING "original: %s\n", - existing->gh_ip); - print_symbol(KERN_WARNING "new: %s\n", gh->gh_ip); - BUG(); + if (gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)) { + if (test_bit(GLF_LOCK, &gl->gl_flags)) + try_lock = 1; + if (test_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags)) + goto fail; + } + + list_for_each_entry(gh2, &gl->gl_holders, gh_list) { + if (unlikely(gh2->gh_owner_pid == gh->gh_owner_pid && + (gh->gh_gl->gl_ops->go_type != LM_TYPE_FLOCK))) + goto trap_recursive; + if (try_lock && + !(gh2->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)) && + !may_grant(gl, gh)) { +fail: + gh->gh_error = GLR_TRYFAILED; + gfs2_holder_wake(gh); + return; } + if (test_bit(HIF_HOLDER, &gh2->gh_iflags)) + continue; + if (unlikely((gh->gh_flags & LM_FLAG_PRIORITY) && !insert_pt)) + insert_pt = &gh2->gh_list; + } + if (likely(insert_pt == NULL)) { + list_add_tail(&gh->gh_list, &gl->gl_holders); + if (unlikely(gh->gh_flags & LM_FLAG_PRIORITY)) + goto do_cancel; + return; + } + list_add_tail(&gh->gh_list, insert_pt); +do_cancel: + gh = list_entry(gl->gl_holders.next, struct gfs2_holder, gh_list); + if (!(gh->gh_flags & LM_FLAG_PRIORITY)) { + spin_unlock(&gl->gl_spin); + sdp->sd_lockstruct.ls_ops->lm_cancel(gl->gl_lock); + spin_lock(&gl->gl_spin); } + return; - if (gh->gh_flags & LM_FLAG_PRIORITY) - list_add(&gh->gh_list, &gl->gl_waiters3); - else - list_add_tail(&gh->gh_list, &gl->gl_waiters3); +trap_recursive: + print_symbol(KERN_ERR "original: %s\n", gh2->gh_ip); + printk(KERN_ERR "pid: %d\n", pid_nr(gh2->gh_owner_pid)); + printk(KERN_ERR "lock type: %d req lock state : %d\n", + gh2->gh_gl->gl_name.ln_type, gh2->gh_state); + print_symbol(KERN_ERR "new: %s\n", gh->gh_ip); + printk(KERN_ERR "pid: %d\n", pid_nr(gh->gh_owner_pid)); + printk(KERN_ERR "lock type: %d req lock state : %d\n", + gh->gh_gl->gl_name.ln_type, gh->gh_state); + __dump_glock(NULL, gl); + BUG(); } /** @@ -1165,24 +943,16 @@ int gfs2_glock_nq(struct gfs2_holder *gh) struct gfs2_sbd *sdp = gl->gl_sbd; int error = 0; -restart: - if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) { - set_bit(HIF_ABORTED, &gh->gh_iflags); + if (unlikely(test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) return -EIO; - } spin_lock(&gl->gl_spin); add_to_queue(gh); - run_queue(gl); + run_queue(gl, 1); spin_unlock(&gl->gl_spin); - if (!(gh->gh_flags & GL_ASYNC)) { - error = glock_wait_internal(gh); - if (error == GLR_CANCELED) { - msleep(100); - goto restart; - } - } + if (!(gh->gh_flags & GL_ASYNC)) + error = gfs2_glock_wait(gh); return error; } @@ -1196,48 +966,7 @@ restart: int gfs2_glock_poll(struct gfs2_holder *gh) { - struct gfs2_glock *gl = gh->gh_gl; - int ready = 0; - - spin_lock(&gl->gl_spin); - - if (test_bit(HIF_HOLDER, &gh->gh_iflags)) - ready = 1; - else if (list_empty(&gh->gh_list)) { - if (gh->gh_error == GLR_CANCELED) { - spin_unlock(&gl->gl_spin); - msleep(100); - if (gfs2_glock_nq(gh)) - return 1; - return 0; - } else - ready = 1; - } - - spin_unlock(&gl->gl_spin); - - return ready; -} - -/** - * gfs2_glock_wait - wait for a lock acquisition that ended in a GLR_ASYNC - * @gh: the holder structure - * - * Returns: 0, GLR_TRYFAILED, or errno on failure - */ - -int gfs2_glock_wait(struct gfs2_holder *gh) -{ - int error; - - error = glock_wait_internal(gh); - if (error == GLR_CANCELED) { - msleep(100); - gh->gh_flags &= ~GL_ASYNC; - error = gfs2_glock_nq(gh); - } - - return error; + return test_bit(HIF_WAIT, &gh->gh_iflags) ? 0 : 1; } /** @@ -1251,26 +980,30 @@ void gfs2_glock_dq(struct gfs2_holder *gh) struct gfs2_glock *gl = gh->gh_gl; const struct gfs2_glock_operations *glops = gl->gl_ops; unsigned delay = 0; + int fast_path = 0; + spin_lock(&gl->gl_spin); if (gh->gh_flags & GL_NOCACHE) handle_callback(gl, LM_ST_UNLOCKED, 0, 0); - gfs2_glmutex_lock(gl); - - spin_lock(&gl->gl_spin); list_del_init(&gh->gh_list); - - if (list_empty(&gl->gl_holders)) { + if (find_first_holder(gl) == NULL) { if (glops->go_unlock) { + GLOCK_BUG_ON(gl, test_and_set_bit(GLF_LOCK, &gl->gl_flags)); spin_unlock(&gl->gl_spin); glops->go_unlock(gh); spin_lock(&gl->gl_spin); + clear_bit(GLF_LOCK, &gl->gl_flags); } gl->gl_stamp = jiffies; + if (list_empty(&gl->gl_holders) && + !test_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && + !test_bit(GLF_DEMOTE, &gl->gl_flags)) + fast_path = 1; } - - clear_bit(GLF_LOCK, &gl->gl_flags); spin_unlock(&gl->gl_spin); + if (likely(fast_path)) + return; gfs2_glock_hold(gl); if (test_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && @@ -1469,20 +1202,14 @@ int gfs2_lvb_hold(struct gfs2_glock *gl) { int error; - gfs2_glmutex_lock(gl); - if (!atomic_read(&gl->gl_lvb_count)) { error = gfs2_lm_hold_lvb(gl->gl_sbd, gl->gl_lock, &gl->gl_lvb); - if (error) { - gfs2_glmutex_unlock(gl); + if (error) return error; - } gfs2_glock_hold(gl); } atomic_inc(&gl->gl_lvb_count); - gfs2_glmutex_unlock(gl); - return 0; } @@ -1497,8 +1224,6 @@ void gfs2_lvb_unhold(struct gfs2_glock *gl) struct gfs2_sbd *sdp = gl->gl_sbd; gfs2_glock_hold(gl); - gfs2_glmutex_lock(gl); - gfs2_assert(gl->gl_sbd, atomic_read(&gl->gl_lvb_count) > 0); if (atomic_dec_and_test(&gl->gl_lvb_count)) { if (likely(!test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) @@ -1506,8 +1231,6 @@ void gfs2_lvb_unhold(struct gfs2_glock *gl) gl->gl_lvb = NULL; gfs2_glock_put(gl); } - - gfs2_glmutex_unlock(gl); gfs2_glock_put(gl); } @@ -1527,7 +1250,9 @@ static void blocking_cb(struct gfs2_sbd *sdp, struct lm_lockname *name, if (time_before(now, holdtime)) delay = holdtime - now; + spin_lock(&gl->gl_spin); handle_callback(gl, state, 1, delay); + spin_unlock(&gl->gl_spin); if (queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0) gfs2_glock_put(gl); } @@ -1568,7 +1293,8 @@ void gfs2_glock_cb(void *cb_data, unsigned int type, void *data) gl = gfs2_glock_find(sdp, &async->lc_name); if (gfs2_assert_warn(sdp, gl)) return; - xmote_bh(gl, async->lc_ret); + gl->gl_reply = async->lc_ret; + set_bit(GLF_REPLY_PENDING, &gl->gl_flags); if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0) gfs2_glock_put(gl); up_read(&gfs2_umount_flush_sem); @@ -1646,6 +1372,7 @@ void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl) void gfs2_reclaim_glock(struct gfs2_sbd *sdp) { struct gfs2_glock *gl; + int done_callback = 0; spin_lock(&sdp->sd_reclaim_lock); if (list_empty(&sdp->sd_reclaim_list)) { @@ -1660,14 +1387,16 @@ void gfs2_reclaim_glock(struct gfs2_sbd *sdp) atomic_dec(&sdp->sd_reclaim_count); atomic_inc(&sdp->sd_reclaimed); - if (gfs2_glmutex_trylock(gl)) { - if (list_empty(&gl->gl_holders) && - gl->gl_state != LM_ST_UNLOCKED && demote_ok(gl)) - handle_callback(gl, LM_ST_UNLOCKED, 0, 0); - gfs2_glmutex_unlock(gl); + spin_lock(&gl->gl_spin); + if (find_first_holder(gl) == NULL && + gl->gl_state != LM_ST_UNLOCKED && demote_ok(gl)) { + handle_callback(gl, LM_ST_UNLOCKED, 0, 0); + done_callback = 1; } - - gfs2_glock_put(gl); + spin_unlock(&gl->gl_spin); + if (!done_callback || + queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0) + gfs2_glock_put(gl); } /** @@ -1724,18 +1453,14 @@ static void scan_glock(struct gfs2_glock *gl) { if (gl->gl_ops == &gfs2_inode_glops && gl->gl_object) return; + if (test_bit(GLF_LOCK, &gl->gl_flags)) + return; - if (gfs2_glmutex_trylock(gl)) { - if (list_empty(&gl->gl_holders) && - gl->gl_state != LM_ST_UNLOCKED && demote_ok(gl)) - goto out_schedule; - gfs2_glmutex_unlock(gl); - } - return; - -out_schedule: - gfs2_glmutex_unlock(gl); - gfs2_glock_schedule_for_reclaim(gl); + spin_lock(&gl->gl_spin); + if (find_first_holder(gl) == NULL && + gl->gl_state != LM_ST_UNLOCKED && demote_ok(gl)) + gfs2_glock_schedule_for_reclaim(gl); + spin_unlock(&gl->gl_spin); } /** @@ -1760,12 +1485,13 @@ static void clear_glock(struct gfs2_glock *gl) spin_unlock(&sdp->sd_reclaim_lock); } - if (gfs2_glmutex_trylock(gl)) { - if (list_empty(&gl->gl_holders) && - gl->gl_state != LM_ST_UNLOCKED) - handle_callback(gl, LM_ST_UNLOCKED, 0, 0); - gfs2_glmutex_unlock(gl); - } + spin_lock(&gl->gl_spin); + if (find_first_holder(gl) == NULL && gl->gl_state != LM_ST_UNLOCKED) + handle_callback(gl, LM_ST_UNLOCKED, 0, 0); + spin_unlock(&gl->gl_spin); + gfs2_glock_hold(gl); + if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0) + gfs2_glock_put(gl); } /** @@ -1810,180 +1536,164 @@ void gfs2_gl_hash_clear(struct gfs2_sbd *sdp, int wait) } } -/* - * Diagnostic routines to help debug distributed deadlock - */ - -static void gfs2_print_symbol(struct glock_iter *gi, const char *fmt, - unsigned long address) +static const char *state2str(unsigned state) { - char buffer[KSYM_SYMBOL_LEN]; - - sprint_symbol(buffer, address); - print_dbg(gi, fmt, buffer); + switch(state) { + case LM_ST_UNLOCKED: + return "UN"; + case LM_ST_SHARED: + return "SH"; + case LM_ST_DEFERRED: + return "DF"; + case LM_ST_EXCLUSIVE: + return "EX"; + } + return "??"; +} + +static const char *hflags2str(char *buf, unsigned flags, unsigned long iflags) +{ + char *p = buf; + if (flags & LM_FLAG_TRY) + *p++ = 't'; + if (flags & LM_FLAG_TRY_1CB) + *p++ = 'T'; + if (flags & LM_FLAG_NOEXP) + *p++ = 'e'; + if (flags & LM_FLAG_ANY) + *p++ = 'a'; + if (flags & LM_FLAG_PRIORITY) + *p++ = 'p'; + if (flags & GL_ASYNC) + *p++ = 'a'; + if (flags & GL_EXACT) + *p++ = 'E'; + if (flags & GL_ATIME) + *p++ = 'a'; + if (flags & GL_NOCACHE) + *p++ = 'c'; + if (test_bit(HIF_HOLDER, &iflags)) + *p++ = 'H'; + if (test_bit(HIF_WAIT, &iflags)) + *p++ = 'W'; + if (test_bit(HIF_FIRST, &iflags)) + *p++ = 'F'; + *p = 0; + return buf; } /** * dump_holder - print information about a glock holder - * @str: a string naming the type of holder + * @seq: the seq_file struct * @gh: the glock holder * * Returns: 0 on success, -ENOBUFS when we run out of space */ -static int dump_holder(struct glock_iter *gi, char *str, - struct gfs2_holder *gh) +static int dump_holder(struct seq_file *seq, const struct gfs2_holder *gh) { - unsigned int x; - struct task_struct *gh_owner; + struct task_struct *gh_owner = NULL; + char buffer[KSYM_SYMBOL_LEN]; + char flags_buf[32]; - print_dbg(gi, " %s\n", str); - if (gh->gh_owner_pid) { - print_dbg(gi, " owner = %ld ", - (long)pid_nr(gh->gh_owner_pid)); + sprint_symbol(buffer, gh->gh_ip); + if (gh->gh_owner_pid) gh_owner = pid_task(gh->gh_owner_pid, PIDTYPE_PID); - if (gh_owner) - print_dbg(gi, "(%s)\n", gh_owner->comm); - else - print_dbg(gi, "(ended)\n"); - } else - print_dbg(gi, " owner = -1\n"); - print_dbg(gi, " gh_state = %u\n", gh->gh_state); - print_dbg(gi, " gh_flags ="); - for (x = 0; x < 32; x++) - if (gh->gh_flags & (1 << x)) - print_dbg(gi, " %u", x); - print_dbg(gi, " \n"); - print_dbg(gi, " error = %d\n", gh->gh_error); - print_dbg(gi, " gh_iflags ="); - for (x = 0; x < 32; x++) - if (test_bit(x, &gh->gh_iflags)) - print_dbg(gi, " %u", x); - print_dbg(gi, " \n"); - gfs2_print_symbol(gi, " initialized at: %s\n", gh->gh_ip); - + gfs2_print_dbg(seq, " H: s:%s f:%s e:%d p:%ld [%s] %s\n", + state2str(gh->gh_state), + hflags2str(flags_buf, gh->gh_flags, gh->gh_iflags), + gh->gh_error, + gh->gh_owner_pid ? (long)pid_nr(gh->gh_owner_pid) : -1, + gh_owner ? gh_owner->comm : "(ended)", buffer); return 0; } -/** - * dump_inode - print information about an inode - * @ip: the inode - * - * Returns: 0 on success, -ENOBUFS when we run out of space - */ - -static int dump_inode(struct glock_iter *gi, struct gfs2_inode *ip) -{ - unsigned int x; - - print_dbg(gi, " Inode:\n"); - print_dbg(gi, " num = %llu/%llu\n", - (unsigned long long)ip->i_no_formal_ino, - (unsigned long long)ip->i_no_addr); - print_dbg(gi, " type = %u\n", IF2DT(ip->i_inode.i_mode)); - print_dbg(gi, " i_flags ="); - for (x = 0; x < 32; x++) - if (test_bit(x, &ip->i_flags)) - print_dbg(gi, " %u", x); - print_dbg(gi, " \n"); - return 0; +static const char *gflags2str(char *buf, const unsigned long *gflags) +{ + char *p = buf; + if (test_bit(GLF_LOCK, gflags)) + *p++ = 'l'; + if (test_bit(GLF_STICKY, gflags)) + *p++ = 's'; + if (test_bit(GLF_DEMOTE, gflags)) + *p++ = 'D'; + if (test_bit(GLF_PENDING_DEMOTE, gflags)) + *p++ = 'd'; + if (test_bit(GLF_DEMOTE_IN_PROGRESS, gflags)) + *p++ = 'p'; + if (test_bit(GLF_DIRTY, gflags)) + *p++ = 'y'; + if (test_bit(GLF_LFLUSH, gflags)) + *p++ = 'f'; + if (test_bit(GLF_INVALIDATE_IN_PROGRESS, gflags)) + *p++ = 'i'; + if (test_bit(GLF_REPLY_PENDING, gflags)) + *p++ = 'r'; + *p = 0; + return buf; } /** - * dump_glock - print information about a glock + * __dump_glock - print information about a glock + * @seq: The seq_file struct * @gl: the glock - * @count: where we are in the buffer + * + * The file format is as follows: + * One line per object, capital letters are used to indicate objects + * G = glock, I = Inode, R = rgrp, H = holder. Glocks are not indented, + * other objects are indented by a single space and follow the glock to + * which they are related. Fields are indicated by lower case letters + * followed by a colon and the field value, except for strings which are in + * [] so that its possible to see if they are composed of spaces for + * example. The field's are n = number (id of the object), f = flags, + * t = type, s = state, r = refcount, e = error, p = pid. * * Returns: 0 on success, -ENOBUFS when we run out of space */ -static int dump_glock(struct glock_iter *gi, struct gfs2_glock *gl) +static int __dump_glock(struct seq_file *seq, const struct gfs2_glock *gl) { - struct gfs2_holder *gh; - unsigned int x; - int error = -ENOBUFS; - struct task_struct *gl_owner; + const struct gfs2_glock_operations *glops = gl->gl_ops; + unsigned long long dtime; + const struct gfs2_holder *gh; + char gflags_buf[32]; + int error = 0; - spin_lock(&gl->gl_spin); + dtime = jiffies - gl->gl_demote_time; + dtime *= 1000000/HZ; /* demote time in uSec */ + if (!test_bit(GLF_DEMOTE, &gl->gl_flags)) + dtime = 0; + gfs2_print_dbg(seq, "G: s:%s n:%u/%llu f:%s t:%s d:%s/%llu l:%d a:%d r:%d\n", + state2str(gl->gl_state), + gl->gl_name.ln_type, + (unsigned long long)gl->gl_name.ln_number, + gflags2str(gflags_buf, &gl->gl_flags), + state2str(gl->gl_target), + state2str(gl->gl_demote_state), dtime, + atomic_read(&gl->gl_lvb_count), + atomic_read(&gl->gl_ail_count), + atomic_read(&gl->gl_ref)); - print_dbg(gi, "Glock 0x%p (%u, 0x%llx)\n", gl, gl->gl_name.ln_type, - (unsigned long long)gl->gl_name.ln_number); - print_dbg(gi, " gl_flags ="); - for (x = 0; x < 32; x++) { - if (test_bit(x, &gl->gl_flags)) - print_dbg(gi, " %u", x); - } - if (!test_bit(GLF_LOCK, &gl->gl_flags)) - print_dbg(gi, " (unlocked)"); - print_dbg(gi, " \n"); - print_dbg(gi, " gl_ref = %d\n", atomic_read(&gl->gl_ref)); - print_dbg(gi, " gl_state = %u\n", gl->gl_state); - if (gl->gl_owner_pid) { - gl_owner = pid_task(gl->gl_owner_pid, PIDTYPE_PID); - if (gl_owner) - print_dbg(gi, " gl_owner = pid %d (%s)\n", - pid_nr(gl->gl_owner_pid), gl_owner->comm); - else - print_dbg(gi, " gl_owner = %d (ended)\n", - pid_nr(gl->gl_owner_pid)); - } else - print_dbg(gi, " gl_owner = -1\n"); - print_dbg(gi, " gl_ip = %lu\n", gl->gl_ip); - print_dbg(gi, " req_gh = %s\n", (gl->gl_req_gh) ? "yes" : "no"); - print_dbg(gi, " lvb_count = %d\n", atomic_read(&gl->gl_lvb_count)); - print_dbg(gi, " object = %s\n", (gl->gl_object) ? "yes" : "no"); - print_dbg(gi, " reclaim = %s\n", - (list_empty(&gl->gl_reclaim)) ? "no" : "yes"); - if (gl->gl_aspace) - print_dbg(gi, " aspace = 0x%p nrpages = %lu\n", gl->gl_aspace, - gl->gl_aspace->i_mapping->nrpages); - else - print_dbg(gi, " aspace = no\n"); - print_dbg(gi, " ail = %d\n", atomic_read(&gl->gl_ail_count)); - if (gl->gl_req_gh) { - error = dump_holder(gi, "Request", gl->gl_req_gh); - if (error) - goto out; - } list_for_each_entry(gh, &gl->gl_holders, gh_list) { - error = dump_holder(gi, "Holder", gh); + error = dump_holder(seq, gh); if (error) goto out; } - list_for_each_entry(gh, &gl->gl_waiters1, gh_list) { - error = dump_holder(gi, "Waiter1", gh); - if (error) - goto out; - } - list_for_each_entry(gh, &gl->gl_waiters3, gh_list) { - error = dump_holder(gi, "Waiter3", gh); - if (error) - goto out; - } - if (test_bit(GLF_DEMOTE, &gl->gl_flags)) { - print_dbg(gi, " Demotion req to state %u (%llu uS ago)\n", - gl->gl_demote_state, (unsigned long long) - (jiffies - gl->gl_demote_time)*(1000000/HZ)); - } - if (gl->gl_ops == &gfs2_inode_glops && gl->gl_object) { - if (!test_bit(GLF_LOCK, &gl->gl_flags) && - list_empty(&gl->gl_holders)) { - error = dump_inode(gi, gl->gl_object); - if (error) - goto out; - } else { - error = -ENOBUFS; - print_dbg(gi, " Inode: busy\n"); - } - } - - error = 0; - + if (gl->gl_state != LM_ST_UNLOCKED && glops->go_dump) + error = glops->go_dump(seq, gl); out: - spin_unlock(&gl->gl_spin); return error; } +static int dump_glock(struct seq_file *seq, struct gfs2_glock *gl) +{ + int ret; + spin_lock(&gl->gl_spin); + ret = __dump_glock(seq, gl); + spin_unlock(&gl->gl_spin); + return ret; +} + /** * gfs2_dump_lockstate - print out the current lockstate * @sdp: the filesystem @@ -2086,7 +1796,7 @@ void gfs2_glock_exit(void) module_param(scand_secs, uint, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(scand_secs, "The number of seconds between scand runs"); -static int gfs2_glock_iter_next(struct glock_iter *gi) +static int gfs2_glock_iter_next(struct gfs2_glock_iter *gi) { struct gfs2_glock *gl; @@ -2104,7 +1814,7 @@ restart: gfs2_glock_put(gl); if (gl && gi->gl == NULL) gi->hash++; - while(gi->gl == NULL) { + while (gi->gl == NULL) { if (gi->hash >= GFS2_GL_HASH_SIZE) return 1; read_lock(gl_lock_addr(gi->hash)); @@ -2122,58 +1832,34 @@ restart: return 0; } -static void gfs2_glock_iter_free(struct glock_iter *gi) +static void gfs2_glock_iter_free(struct gfs2_glock_iter *gi) { if (gi->gl) gfs2_glock_put(gi->gl); - kfree(gi); -} - -static struct glock_iter *gfs2_glock_iter_init(struct gfs2_sbd *sdp) -{ - struct glock_iter *gi; - - gi = kmalloc(sizeof (*gi), GFP_KERNEL); - if (!gi) - return NULL; - - gi->sdp = sdp; - gi->hash = 0; - gi->seq = NULL; gi->gl = NULL; - memset(gi->string, 0, sizeof(gi->string)); - - if (gfs2_glock_iter_next(gi)) { - gfs2_glock_iter_free(gi); - return NULL; - } - - return gi; } -static void *gfs2_glock_seq_start(struct seq_file *file, loff_t *pos) +static void *gfs2_glock_seq_start(struct seq_file *seq, loff_t *pos) { - struct glock_iter *gi; + struct gfs2_glock_iter *gi = seq->private; loff_t n = *pos; - gi = gfs2_glock_iter_init(file->private); - if (!gi) - return NULL; + gi->hash = 0; - while(n--) { + do { if (gfs2_glock_iter_next(gi)) { gfs2_glock_iter_free(gi); return NULL; } - } + } while (n--); - return gi; + return gi->gl; } -static void *gfs2_glock_seq_next(struct seq_file *file, void *iter_ptr, +static void *gfs2_glock_seq_next(struct seq_file *seq, void *iter_ptr, loff_t *pos) { - struct glock_iter *gi = iter_ptr; + struct gfs2_glock_iter *gi = seq->private; (*pos)++; @@ -2182,24 +1868,18 @@ static void *gfs2_glock_seq_next(struct seq_file *file, void *iter_ptr, return NULL; } - return gi; + return gi->gl; } -static void gfs2_glock_seq_stop(struct seq_file *file, void *iter_ptr) +static void gfs2_glock_seq_stop(struct seq_file *seq, void *iter_ptr) { - struct glock_iter *gi = iter_ptr; - if (gi) - gfs2_glock_iter_free(gi); + struct gfs2_glock_iter *gi = seq->private; + gfs2_glock_iter_free(gi); } -static int gfs2_glock_seq_show(struct seq_file *file, void *iter_ptr) +static int gfs2_glock_seq_show(struct seq_file *seq, void *iter_ptr) { - struct glock_iter *gi = iter_ptr; - - gi->seq = file; - dump_glock(gi, gi->gl); - - return 0; + return dump_glock(seq, iter_ptr); } static const struct seq_operations gfs2_glock_seq_ops = { @@ -2211,17 +1891,14 @@ static const struct seq_operations gfs2_glock_seq_ops = { static int gfs2_debugfs_open(struct inode *inode, struct file *file) { - struct seq_file *seq; - int ret; - - ret = seq_open(file, &gfs2_glock_seq_ops); - if (ret) - return ret; - - seq = file->private_data; - seq->private = inode->i_private; - - return 0; + int ret = seq_open_private(file, &gfs2_glock_seq_ops, + sizeof(struct gfs2_glock_iter)); + if (ret == 0) { + struct seq_file *seq = file->private_data; + struct gfs2_glock_iter *gi = seq->private; + gi->sdp = inode->i_private; + } + return ret; } static const struct file_operations gfs2_debug_fops = { @@ -2229,7 +1906,7 @@ static const struct file_operations gfs2_debug_fops = { .open = gfs2_debugfs_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release + .release = seq_release_private, }; int gfs2_create_debugfs_file(struct gfs2_sbd *sdp) diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h index cdad3e6f8150..7389f8ef0a31 100644 --- a/fs/gfs2/glock.h +++ b/fs/gfs2/glock.h @@ -26,11 +26,8 @@ #define GL_SKIP 0x00000100 #define GL_ATIME 0x00000200 #define GL_NOCACHE 0x00000400 -#define GL_FLOCK 0x00000800 -#define GL_NOCANCEL 0x00001000 #define GLR_TRYFAILED 13 -#define GLR_CANCELED 14 static inline struct gfs2_holder *gfs2_glock_is_locked_by_me(struct gfs2_glock *gl) { @@ -41,6 +38,8 @@ static inline struct gfs2_holder *gfs2_glock_is_locked_by_me(struct gfs2_glock * spin_lock(&gl->gl_spin); pid = task_pid(current); list_for_each_entry(gh, &gl->gl_holders, gh_list) { + if (!test_bit(HIF_HOLDER, &gh->gh_iflags)) + break; if (gh->gh_owner_pid == pid) goto out; } @@ -70,7 +69,7 @@ static inline int gfs2_glock_is_blocking(struct gfs2_glock *gl) { int ret; spin_lock(&gl->gl_spin); - ret = test_bit(GLF_DEMOTE, &gl->gl_flags) || !list_empty(&gl->gl_waiters3); + ret = test_bit(GLF_DEMOTE, &gl->gl_flags); spin_unlock(&gl->gl_spin); return ret; } @@ -98,6 +97,7 @@ int gfs2_glock_nq_num(struct gfs2_sbd *sdp, int gfs2_glock_nq_m(unsigned int num_gh, struct gfs2_holder *ghs); void gfs2_glock_dq_m(unsigned int num_gh, struct gfs2_holder *ghs); void gfs2_glock_dq_uninit_m(unsigned int num_gh, struct gfs2_holder *ghs); +void gfs2_print_dbg(struct seq_file *seq, const char *fmt, ...); /** * gfs2_glock_nq_init - intialize a holder and enqueue it on a glock @@ -130,7 +130,6 @@ int gfs2_lvb_hold(struct gfs2_glock *gl); void gfs2_lvb_unhold(struct gfs2_glock *gl); void gfs2_glock_cb(void *cb_data, unsigned int type, void *data); - void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl); void gfs2_reclaim_glock(struct gfs2_sbd *sdp); void gfs2_gl_hash_clear(struct gfs2_sbd *sdp, int wait); diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c index 07d84d16cda4..c6c318c2a0f6 100644 --- a/fs/gfs2/glops.c +++ b/fs/gfs2/glops.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "gfs2.h" #include "incore.h" @@ -171,26 +172,6 @@ static void inode_go_sync(struct gfs2_glock *gl) } } -/** - * inode_go_xmote_bh - After promoting/demoting a glock - * @gl: the glock - * - */ - -static void inode_go_xmote_bh(struct gfs2_glock *gl) -{ - struct gfs2_holder *gh = gl->gl_req_gh; - struct buffer_head *bh; - int error; - - if (gl->gl_state != LM_ST_UNLOCKED && - (!gh || !(gh->gh_flags & GL_SKIP))) { - error = gfs2_meta_read(gl, gl->gl_name.ln_number, 0, &bh); - if (!error) - brelse(bh); - } -} - /** * inode_go_inval - prepare a inode glock to be released * @gl: the glock @@ -266,6 +247,26 @@ static int inode_go_lock(struct gfs2_holder *gh) return error; } +/** + * inode_go_dump - print information about an inode + * @seq: The iterator + * @ip: the inode + * + * Returns: 0 on success, -ENOBUFS when we run out of space + */ + +static int inode_go_dump(struct seq_file *seq, const struct gfs2_glock *gl) +{ + const struct gfs2_inode *ip = gl->gl_object; + if (ip == NULL) + return 0; + gfs2_print_dbg(seq, " I: n:%llu/%llu t:%u f:0x%08lx\n", + (unsigned long long)ip->i_no_formal_ino, + (unsigned long long)ip->i_no_addr, + IF2DT(ip->i_inode.i_mode), ip->i_flags); + return 0; +} + /** * rgrp_go_demote_ok - Check to see if it's ok to unlock a RG's glock * @gl: the glock @@ -305,6 +306,22 @@ static void rgrp_go_unlock(struct gfs2_holder *gh) gfs2_rgrp_bh_put(gh->gh_gl->gl_object); } +/** + * rgrp_go_dump - print out an rgrp + * @seq: The iterator + * @gl: The glock in question + * + */ + +static int rgrp_go_dump(struct seq_file *seq, const struct gfs2_glock *gl) +{ + const struct gfs2_rgrpd *rgd = gl->gl_object; + if (rgd == NULL) + return 0; + gfs2_print_dbg(seq, " R: n:%llu\n", (unsigned long long)rgd->rd_addr); + return 0; +} + /** * trans_go_sync - promote/demote the transaction glock * @gl: the glock @@ -330,7 +347,7 @@ static void trans_go_sync(struct gfs2_glock *gl) * */ -static void trans_go_xmote_bh(struct gfs2_glock *gl) +static int trans_go_xmote_bh(struct gfs2_glock *gl, struct gfs2_holder *gh) { struct gfs2_sbd *sdp = gl->gl_sbd; struct gfs2_inode *ip = GFS2_I(sdp->sd_jdesc->jd_inode); @@ -338,8 +355,7 @@ static void trans_go_xmote_bh(struct gfs2_glock *gl) struct gfs2_log_header_host head; int error; - if (gl->gl_state != LM_ST_UNLOCKED && - test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags)) { + if (test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags)) { j_gl->gl_ops->go_inval(j_gl, DIO_METADATA); error = gfs2_find_jhead(sdp->sd_jdesc, &head); @@ -354,6 +370,7 @@ static void trans_go_xmote_bh(struct gfs2_glock *gl) gfs2_log_pointers_init(sdp, head.lh_blkno); } } + return 0; } /** @@ -375,12 +392,12 @@ const struct gfs2_glock_operations gfs2_meta_glops = { const struct gfs2_glock_operations gfs2_inode_glops = { .go_xmote_th = inode_go_sync, - .go_xmote_bh = inode_go_xmote_bh, .go_inval = inode_go_inval, .go_demote_ok = inode_go_demote_ok, .go_lock = inode_go_lock, + .go_dump = inode_go_dump, .go_type = LM_TYPE_INODE, - .go_min_hold_time = HZ / 10, + .go_min_hold_time = HZ / 5, }; const struct gfs2_glock_operations gfs2_rgrp_glops = { @@ -389,8 +406,9 @@ const struct gfs2_glock_operations gfs2_rgrp_glops = { .go_demote_ok = rgrp_go_demote_ok, .go_lock = rgrp_go_lock, .go_unlock = rgrp_go_unlock, + .go_dump = rgrp_go_dump, .go_type = LM_TYPE_RGRP, - .go_min_hold_time = HZ / 10, + .go_min_hold_time = HZ / 5, }; const struct gfs2_glock_operations gfs2_trans_glops = { diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h index eabe5eac41da..4b734c6e34f0 100644 --- a/fs/gfs2/incore.h +++ b/fs/gfs2/incore.h @@ -128,20 +128,20 @@ struct gfs2_bufdata { struct gfs2_glock_operations { void (*go_xmote_th) (struct gfs2_glock *gl); - void (*go_xmote_bh) (struct gfs2_glock *gl); + int (*go_xmote_bh) (struct gfs2_glock *gl, struct gfs2_holder *gh); void (*go_inval) (struct gfs2_glock *gl, int flags); int (*go_demote_ok) (struct gfs2_glock *gl); int (*go_lock) (struct gfs2_holder *gh); void (*go_unlock) (struct gfs2_holder *gh); + int (*go_dump)(struct seq_file *seq, const struct gfs2_glock *gl); const int go_type; const unsigned long go_min_hold_time; }; enum { /* States */ - HIF_HOLDER = 6, + HIF_HOLDER = 6, /* Set for gh that "holds" the glock */ HIF_FIRST = 7, - HIF_ABORTED = 9, HIF_WAIT = 10, }; @@ -154,20 +154,20 @@ struct gfs2_holder { unsigned gh_flags; int gh_error; - unsigned long gh_iflags; + unsigned long gh_iflags; /* HIF_... */ unsigned long gh_ip; }; enum { - GLF_LOCK = 1, - GLF_STICKY = 2, - GLF_DEMOTE = 3, - GLF_PENDING_DEMOTE = 4, - GLF_DIRTY = 5, - GLF_DEMOTE_IN_PROGRESS = 6, - GLF_LFLUSH = 7, - GLF_WAITERS2 = 8, - GLF_CONV_DEADLK = 9, + GLF_LOCK = 1, + GLF_STICKY = 2, + GLF_DEMOTE = 3, + GLF_PENDING_DEMOTE = 4, + GLF_DEMOTE_IN_PROGRESS = 5, + GLF_DIRTY = 6, + GLF_LFLUSH = 7, + GLF_INVALIDATE_IN_PROGRESS = 8, + GLF_REPLY_PENDING = 9, }; struct gfs2_glock { @@ -179,19 +179,14 @@ struct gfs2_glock { spinlock_t gl_spin; unsigned int gl_state; + unsigned int gl_target; + unsigned int gl_reply; unsigned int gl_hash; unsigned int gl_demote_state; /* state requested by remote node */ unsigned long gl_demote_time; /* time of first demote request */ - struct pid *gl_owner_pid; - unsigned long gl_ip; struct list_head gl_holders; - struct list_head gl_waiters1; /* HIF_MUTEX */ - struct list_head gl_waiters3; /* HIF_PROMOTE */ const struct gfs2_glock_operations *gl_ops; - - struct gfs2_holder *gl_req_gh; - void *gl_lock; char *gl_lvb; atomic_t gl_lvb_count; diff --git a/fs/gfs2/locking/dlm/lock.c b/fs/gfs2/locking/dlm/lock.c index cf7ea8abec87..fed9a67be0f1 100644 --- a/fs/gfs2/locking/dlm/lock.c +++ b/fs/gfs2/locking/dlm/lock.c @@ -308,6 +308,9 @@ unsigned int gdlm_lock(void *lock, unsigned int cur_state, { struct gdlm_lock *lp = lock; + if (req_state == LM_ST_UNLOCKED) + return gdlm_unlock(lock, cur_state); + clear_bit(LFL_DLM_CANCEL, &lp->flags); if (flags & LM_FLAG_NOEXP) set_bit(LFL_NOBLOCK, &lp->flags); diff --git a/fs/gfs2/locking/nolock/main.c b/fs/gfs2/locking/nolock/main.c index 284a5ece8d94..627bfb79bc8c 100644 --- a/fs/gfs2/locking/nolock/main.c +++ b/fs/gfs2/locking/nolock/main.c @@ -107,6 +107,8 @@ static void nolock_put_lock(void *lock) static unsigned int nolock_lock(void *lock, unsigned int cur_state, unsigned int req_state, unsigned int flags) { + if (req_state == LM_ST_UNLOCKED) + return 0; return req_state | LM_OUT_CACHEABLE; } diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c index 053e2ebbbd50..bcc668d0fadd 100644 --- a/fs/gfs2/main.c +++ b/fs/gfs2/main.c @@ -40,8 +40,6 @@ static void gfs2_init_glock_once(struct kmem_cache *cachep, void *foo) INIT_HLIST_NODE(&gl->gl_list); spin_lock_init(&gl->gl_spin); INIT_LIST_HEAD(&gl->gl_holders); - INIT_LIST_HEAD(&gl->gl_waiters1); - INIT_LIST_HEAD(&gl->gl_waiters3); gl->gl_lvb = NULL; atomic_set(&gl->gl_lvb_count, 0); INIT_LIST_HEAD(&gl->gl_reclaim); diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c index 78d75f892f82..09853620c951 100644 --- a/fs/gfs2/meta_io.c +++ b/fs/gfs2/meta_io.c @@ -129,7 +129,7 @@ void gfs2_meta_sync(struct gfs2_glock *gl) } /** - * getbuf - Get a buffer with a given address space + * gfs2_getbuf - Get a buffer with a given address space * @gl: the glock * @blkno: the block number (filesystem scope) * @create: 1 if the buffer should be created @@ -137,7 +137,7 @@ void gfs2_meta_sync(struct gfs2_glock *gl) * Returns: the buffer */ -static struct buffer_head *getbuf(struct gfs2_glock *gl, u64 blkno, int create) +struct buffer_head *gfs2_getbuf(struct gfs2_glock *gl, u64 blkno, int create) { struct address_space *mapping = gl->gl_aspace->i_mapping; struct gfs2_sbd *sdp = gl->gl_sbd; @@ -205,7 +205,7 @@ static void meta_prep_new(struct buffer_head *bh) struct buffer_head *gfs2_meta_new(struct gfs2_glock *gl, u64 blkno) { struct buffer_head *bh; - bh = getbuf(gl, blkno, CREATE); + bh = gfs2_getbuf(gl, blkno, CREATE); meta_prep_new(bh); return bh; } @@ -223,7 +223,7 @@ struct buffer_head *gfs2_meta_new(struct gfs2_glock *gl, u64 blkno) int gfs2_meta_read(struct gfs2_glock *gl, u64 blkno, int flags, struct buffer_head **bhp) { - *bhp = getbuf(gl, blkno, CREATE); + *bhp = gfs2_getbuf(gl, blkno, CREATE); if (!buffer_uptodate(*bhp)) { ll_rw_block(READ_META, 1, bhp); if (flags & DIO_WAIT) { @@ -346,7 +346,7 @@ void gfs2_meta_wipe(struct gfs2_inode *ip, u64 bstart, u32 blen) struct buffer_head *bh; while (blen) { - bh = getbuf(ip->i_gl, bstart, NO_CREATE); + bh = gfs2_getbuf(ip->i_gl, bstart, NO_CREATE); if (bh) { lock_buffer(bh); gfs2_log_lock(sdp); @@ -421,7 +421,7 @@ struct buffer_head *gfs2_meta_ra(struct gfs2_glock *gl, u64 dblock, u32 extlen) if (extlen > max_ra) extlen = max_ra; - first_bh = getbuf(gl, dblock, CREATE); + first_bh = gfs2_getbuf(gl, dblock, CREATE); if (buffer_uptodate(first_bh)) goto out; @@ -432,7 +432,7 @@ struct buffer_head *gfs2_meta_ra(struct gfs2_glock *gl, u64 dblock, u32 extlen) extlen--; while (extlen) { - bh = getbuf(gl, dblock, CREATE); + bh = gfs2_getbuf(gl, dblock, CREATE); if (!buffer_uptodate(bh) && !buffer_locked(bh)) ll_rw_block(READA, 1, &bh); diff --git a/fs/gfs2/meta_io.h b/fs/gfs2/meta_io.h index 73e3b1c76fe1..b1a5f3674d43 100644 --- a/fs/gfs2/meta_io.h +++ b/fs/gfs2/meta_io.h @@ -47,6 +47,7 @@ struct buffer_head *gfs2_meta_new(struct gfs2_glock *gl, u64 blkno); int gfs2_meta_read(struct gfs2_glock *gl, u64 blkno, int flags, struct buffer_head **bhp); int gfs2_meta_wait(struct gfs2_sbd *sdp, struct buffer_head *bh); +struct buffer_head *gfs2_getbuf(struct gfs2_glock *gl, u64 blkno, int create); void gfs2_attach_bufdata(struct gfs2_glock *gl, struct buffer_head *bh, int meta); diff --git a/fs/gfs2/ops_address.c b/fs/gfs2/ops_address.c index f55394e57cb2..2b556dd034bb 100644 --- a/fs/gfs2/ops_address.c +++ b/fs/gfs2/ops_address.c @@ -507,26 +507,23 @@ static int __gfs2_readpage(void *file, struct page *page) static int gfs2_readpage(struct file *file, struct page *page) { struct gfs2_inode *ip = GFS2_I(page->mapping->host); - struct gfs2_holder *gh; + struct gfs2_holder gh; int error; - gh = gfs2_glock_is_locked_by_me(ip->i_gl); - if (!gh) { - gh = kmalloc(sizeof(struct gfs2_holder), GFP_NOFS); - if (!gh) - return -ENOBUFS; - gfs2_holder_init(ip->i_gl, LM_ST_SHARED, GL_ATIME, gh); + gfs2_holder_init(ip->i_gl, LM_ST_SHARED, GL_ATIME|LM_FLAG_TRY_1CB, &gh); + error = gfs2_glock_nq_atime(&gh); + if (unlikely(error)) { unlock_page(page); - error = gfs2_glock_nq_atime(gh); - if (likely(error != 0)) - goto out; - return AOP_TRUNCATED_PAGE; + goto out; } error = __gfs2_readpage(file, page); - gfs2_glock_dq(gh); + gfs2_glock_dq(&gh); out: - gfs2_holder_uninit(gh); - kfree(gh); + gfs2_holder_uninit(&gh); + if (error == GLR_TRYFAILED) { + yield(); + return AOP_TRUNCATED_PAGE; + } return error; } diff --git a/fs/gfs2/ops_file.c b/fs/gfs2/ops_file.c index e1b7d525a066..0ff512a11925 100644 --- a/fs/gfs2/ops_file.c +++ b/fs/gfs2/ops_file.c @@ -669,8 +669,7 @@ static int do_flock(struct file *file, int cmd, struct file_lock *fl) int error = 0; state = (fl->fl_type == F_WRLCK) ? LM_ST_EXCLUSIVE : LM_ST_SHARED; - flags = (IS_SETLKW(cmd) ? 0 : LM_FLAG_TRY) | GL_EXACT | GL_NOCACHE - | GL_FLOCK; + flags = (IS_SETLKW(cmd) ? 0 : LM_FLAG_TRY) | GL_EXACT | GL_NOCACHE; mutex_lock(&fp->f_fl_mutex); @@ -683,9 +682,8 @@ static int do_flock(struct file *file, int cmd, struct file_lock *fl) gfs2_glock_dq_wait(fl_gh); gfs2_holder_reinit(state, flags, fl_gh); } else { - error = gfs2_glock_get(GFS2_SB(&ip->i_inode), - ip->i_no_addr, &gfs2_flock_glops, - CREATE, &gl); + error = gfs2_glock_get(GFS2_SB(&ip->i_inode), ip->i_no_addr, + &gfs2_flock_glops, CREATE, &gl); if (error) goto out; gfs2_holder_init(gl, state, flags, fl_gh); diff --git a/fs/gfs2/recovery.c b/fs/gfs2/recovery.c index 2888e4b4b1c5..fdd3f0f16d0d 100644 --- a/fs/gfs2/recovery.c +++ b/fs/gfs2/recovery.c @@ -505,7 +505,7 @@ int gfs2_recover_journal(struct gfs2_jdesc *jd) error = gfs2_glock_nq_init(sdp->sd_trans_gl, LM_ST_SHARED, LM_FLAG_NOEXP | LM_FLAG_PRIORITY | - GL_NOCANCEL | GL_NOCACHE, &t_gh); + GL_NOCACHE, &t_gh); if (error) goto fail_gunlock_ji; diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c index 7aeacbc65f35..12fe38fe498f 100644 --- a/fs/gfs2/super.c +++ b/fs/gfs2/super.c @@ -941,8 +941,7 @@ static int gfs2_lock_fs_check_clean(struct gfs2_sbd *sdp, } error = gfs2_glock_nq_init(sdp->sd_trans_gl, LM_ST_DEFERRED, - LM_FLAG_PRIORITY | GL_NOCACHE, - t_gh); + GL_NOCACHE, t_gh); list_for_each_entry(jd, &sdp->sd_jindex_list, jd_list) { error = gfs2_jdesc_check(jd); -- cgit v1.2.3 From f3c9d38a26be32abf9b8897e9e0afc7166c712dd Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Wed, 21 May 2008 17:21:42 +0100 Subject: [GFS2] Fix ordering bug in lock_dlm This looks like a lot of change, but in fact its not. Mostly its things moving from one file to another. The change is just that instead of queuing lock completions and callbacks from the DLM we now pass them directly to GFS2. This gives us a net loss of two list heads per glock (a fair saving in memory) plus a reduction in the latency of delivering the messages to GFS2, plus we now have one thread fewer as well. There was a bug where callbacks and completions could be delivered in the wrong order due to this unnecessary queuing which is fixed by this patch. Signed-off-by: Steven Whitehouse Cc: Bob Peterson --- fs/gfs2/locking/dlm/lock.c | 353 +++++++++++++++++++++++++++++++++-------- fs/gfs2/locking/dlm/lock_dlm.h | 12 +- fs/gfs2/locking/dlm/mount.c | 4 - fs/gfs2/locking/dlm/thread.c | 324 +++---------------------------------- 4 files changed, 306 insertions(+), 387 deletions(-) diff --git a/fs/gfs2/locking/dlm/lock.c b/fs/gfs2/locking/dlm/lock.c index fed9a67be0f1..871ffc9578f2 100644 --- a/fs/gfs2/locking/dlm/lock.c +++ b/fs/gfs2/locking/dlm/lock.c @@ -11,46 +11,63 @@ static char junk_lvb[GDLM_LVB_SIZE]; -static void queue_complete(struct gdlm_lock *lp) + +/* convert dlm lock-mode to gfs lock-state */ + +static s16 gdlm_make_lmstate(s16 dlmmode) { - struct gdlm_ls *ls = lp->ls; + switch (dlmmode) { + case DLM_LOCK_IV: + case DLM_LOCK_NL: + return LM_ST_UNLOCKED; + case DLM_LOCK_EX: + return LM_ST_EXCLUSIVE; + case DLM_LOCK_CW: + return LM_ST_DEFERRED; + case DLM_LOCK_PR: + return LM_ST_SHARED; + } + gdlm_assert(0, "unknown DLM mode %d", dlmmode); + return -1; +} - clear_bit(LFL_ACTIVE, &lp->flags); +/* A lock placed on this queue is re-submitted to DLM as soon as the lock_dlm + thread gets to it. */ + +static void queue_submit(struct gdlm_lock *lp) +{ + struct gdlm_ls *ls = lp->ls; spin_lock(&ls->async_lock); - list_add_tail(&lp->clist, &ls->complete); + list_add_tail(&lp->delay_list, &ls->submit); spin_unlock(&ls->async_lock); wake_up(&ls->thread_wait); } -static inline void gdlm_ast(void *astarg) +static void wake_up_ast(struct gdlm_lock *lp) { - queue_complete(astarg); + clear_bit(LFL_AST_WAIT, &lp->flags); + smp_mb__after_clear_bit(); + wake_up_bit(&lp->flags, LFL_AST_WAIT); } -static inline void gdlm_bast(void *astarg, int mode) +static void gdlm_delete_lp(struct gdlm_lock *lp) { - struct gdlm_lock *lp = astarg; struct gdlm_ls *ls = lp->ls; - if (!mode) { - printk(KERN_INFO "lock_dlm: bast mode zero %x,%llx\n", - lp->lockname.ln_type, - (unsigned long long)lp->lockname.ln_number); - return; - } - spin_lock(&ls->async_lock); - if (!lp->bast_mode) { - list_add_tail(&lp->blist, &ls->blocking); - lp->bast_mode = mode; - } else if (lp->bast_mode < mode) - lp->bast_mode = mode; + if (!list_empty(&lp->delay_list)) + list_del_init(&lp->delay_list); + gdlm_assert(!list_empty(&lp->all_list), "%x,%llx", lp->lockname.ln_type, + (unsigned long long)lp->lockname.ln_number); + list_del_init(&lp->all_list); + ls->all_locks_count--; spin_unlock(&ls->async_lock); - wake_up(&ls->thread_wait); + + kfree(lp); } -void gdlm_queue_delayed(struct gdlm_lock *lp) +static void gdlm_queue_delayed(struct gdlm_lock *lp) { struct gdlm_ls *ls = lp->ls; @@ -59,6 +76,249 @@ void gdlm_queue_delayed(struct gdlm_lock *lp) spin_unlock(&ls->async_lock); } +static void process_complete(struct gdlm_lock *lp) +{ + struct gdlm_ls *ls = lp->ls; + struct lm_async_cb acb; + s16 prev_mode = lp->cur; + + memset(&acb, 0, sizeof(acb)); + + if (lp->lksb.sb_status == -DLM_ECANCEL) { + log_info("complete dlm cancel %x,%llx flags %lx", + lp->lockname.ln_type, + (unsigned long long)lp->lockname.ln_number, + lp->flags); + + lp->req = lp->cur; + acb.lc_ret |= LM_OUT_CANCELED; + if (lp->cur == DLM_LOCK_IV) + lp->lksb.sb_lkid = 0; + goto out; + } + + if (test_and_clear_bit(LFL_DLM_UNLOCK, &lp->flags)) { + if (lp->lksb.sb_status != -DLM_EUNLOCK) { + log_info("unlock sb_status %d %x,%llx flags %lx", + lp->lksb.sb_status, lp->lockname.ln_type, + (unsigned long long)lp->lockname.ln_number, + lp->flags); + return; + } + + lp->cur = DLM_LOCK_IV; + lp->req = DLM_LOCK_IV; + lp->lksb.sb_lkid = 0; + + if (test_and_clear_bit(LFL_UNLOCK_DELETE, &lp->flags)) { + gdlm_delete_lp(lp); + return; + } + goto out; + } + + if (lp->lksb.sb_flags & DLM_SBF_VALNOTVALID) + memset(lp->lksb.sb_lvbptr, 0, GDLM_LVB_SIZE); + + if (lp->lksb.sb_flags & DLM_SBF_ALTMODE) { + if (lp->req == DLM_LOCK_PR) + lp->req = DLM_LOCK_CW; + else if (lp->req == DLM_LOCK_CW) + lp->req = DLM_LOCK_PR; + } + + /* + * A canceled lock request. The lock was just taken off the delayed + * list and was never even submitted to dlm. + */ + + if (test_and_clear_bit(LFL_CANCEL, &lp->flags)) { + log_info("complete internal cancel %x,%llx", + lp->lockname.ln_type, + (unsigned long long)lp->lockname.ln_number); + lp->req = lp->cur; + acb.lc_ret |= LM_OUT_CANCELED; + goto out; + } + + /* + * An error occured. + */ + + if (lp->lksb.sb_status) { + /* a "normal" error */ + if ((lp->lksb.sb_status == -EAGAIN) && + (lp->lkf & DLM_LKF_NOQUEUE)) { + lp->req = lp->cur; + if (lp->cur == DLM_LOCK_IV) + lp->lksb.sb_lkid = 0; + goto out; + } + + /* this could only happen with cancels I think */ + log_info("ast sb_status %d %x,%llx flags %lx", + lp->lksb.sb_status, lp->lockname.ln_type, + (unsigned long long)lp->lockname.ln_number, + lp->flags); + if (lp->lksb.sb_status == -EDEADLOCK && + lp->ls->fsflags & LM_MFLAG_CONV_NODROP) { + lp->req = lp->cur; + acb.lc_ret |= LM_OUT_CONV_DEADLK; + if (lp->cur == DLM_LOCK_IV) + lp->lksb.sb_lkid = 0; + goto out; + } else + return; + } + + /* + * This is an AST for an EX->EX conversion for sync_lvb from GFS. + */ + + if (test_and_clear_bit(LFL_SYNC_LVB, &lp->flags)) { + wake_up_ast(lp); + return; + } + + /* + * A lock has been demoted to NL because it initially completed during + * BLOCK_LOCKS. Now it must be requested in the originally requested + * mode. + */ + + if (test_and_clear_bit(LFL_REREQUEST, &lp->flags)) { + gdlm_assert(lp->req == DLM_LOCK_NL, "%x,%llx", + lp->lockname.ln_type, + (unsigned long long)lp->lockname.ln_number); + gdlm_assert(lp->prev_req > DLM_LOCK_NL, "%x,%llx", + lp->lockname.ln_type, + (unsigned long long)lp->lockname.ln_number); + + lp->cur = DLM_LOCK_NL; + lp->req = lp->prev_req; + lp->prev_req = DLM_LOCK_IV; + lp->lkf &= ~DLM_LKF_CONVDEADLK; + + set_bit(LFL_NOCACHE, &lp->flags); + + if (test_bit(DFL_BLOCK_LOCKS, &ls->flags) && + !test_bit(LFL_NOBLOCK, &lp->flags)) + gdlm_queue_delayed(lp); + else + queue_submit(lp); + return; + } + + /* + * A request is granted during dlm recovery. It may be granted + * because the locks of a failed node were cleared. In that case, + * there may be inconsistent data beneath this lock and we must wait + * for recovery to complete to use it. When gfs recovery is done this + * granted lock will be converted to NL and then reacquired in this + * granted state. + */ + + if (test_bit(DFL_BLOCK_LOCKS, &ls->flags) && + !test_bit(LFL_NOBLOCK, &lp->flags) && + lp->req != DLM_LOCK_NL) { + + lp->cur = lp->req; + lp->prev_req = lp->req; + lp->req = DLM_LOCK_NL; + lp->lkf |= DLM_LKF_CONVERT; + lp->lkf &= ~DLM_LKF_CONVDEADLK; + + log_debug("rereq %x,%llx id %x %d,%d", + lp->lockname.ln_type, + (unsigned long long)lp->lockname.ln_number, + lp->lksb.sb_lkid, lp->cur, lp->req); + + set_bit(LFL_REREQUEST, &lp->flags); + queue_submit(lp); + return; + } + + /* + * DLM demoted the lock to NL before it was granted so GFS must be + * told it cannot cache data for this lock. + */ + + if (lp->lksb.sb_flags & DLM_SBF_DEMOTED) + set_bit(LFL_NOCACHE, &lp->flags); + +out: + /* + * This is an internal lock_dlm lock + */ + + if (test_bit(LFL_INLOCK, &lp->flags)) { + clear_bit(LFL_NOBLOCK, &lp->flags); + lp->cur = lp->req; + wake_up_ast(lp); + return; + } + + /* + * Normal completion of a lock request. Tell GFS it now has the lock. + */ + + clear_bit(LFL_NOBLOCK, &lp->flags); + lp->cur = lp->req; + + acb.lc_name = lp->lockname; + acb.lc_ret |= gdlm_make_lmstate(lp->cur); + + if (!test_and_clear_bit(LFL_NOCACHE, &lp->flags) && + (lp->cur > DLM_LOCK_NL) && (prev_mode > DLM_LOCK_NL)) + acb.lc_ret |= LM_OUT_CACHEABLE; + + ls->fscb(ls->sdp, LM_CB_ASYNC, &acb); +} + +static void gdlm_ast(void *astarg) +{ + struct gdlm_lock *lp = astarg; + clear_bit(LFL_ACTIVE, &lp->flags); + process_complete(lp); +} + +static void process_blocking(struct gdlm_lock *lp, int bast_mode) +{ + struct gdlm_ls *ls = lp->ls; + unsigned int cb = 0; + + switch (gdlm_make_lmstate(bast_mode)) { + case LM_ST_EXCLUSIVE: + cb = LM_CB_NEED_E; + break; + case LM_ST_DEFERRED: + cb = LM_CB_NEED_D; + break; + case LM_ST_SHARED: + cb = LM_CB_NEED_S; + break; + default: + gdlm_assert(0, "unknown bast mode %u", bast_mode); + } + + ls->fscb(ls->sdp, cb, &lp->lockname); +} + + +static void gdlm_bast(void *astarg, int mode) +{ + struct gdlm_lock *lp = astarg; + + if (!mode) { + printk(KERN_INFO "lock_dlm: bast mode zero %x,%llx\n", + lp->lockname.ln_type, + (unsigned long long)lp->lockname.ln_number); + return; + } + + process_blocking(lp, mode); +} + /* convert gfs lock-state to dlm lock-mode */ static s16 make_mode(s16 lmstate) @@ -77,24 +337,6 @@ static s16 make_mode(s16 lmstate) return -1; } -/* convert dlm lock-mode to gfs lock-state */ - -s16 gdlm_make_lmstate(s16 dlmmode) -{ - switch (dlmmode) { - case DLM_LOCK_IV: - case DLM_LOCK_NL: - return LM_ST_UNLOCKED; - case DLM_LOCK_EX: - return LM_ST_EXCLUSIVE; - case DLM_LOCK_CW: - return LM_ST_DEFERRED; - case DLM_LOCK_PR: - return LM_ST_SHARED; - } - gdlm_assert(0, "unknown DLM mode %d", dlmmode); - return -1; -} /* verify agreement with GFS on the current lock state, NB: DLM_LOCK_NL and DLM_LOCK_IV are both considered LM_ST_UNLOCKED by GFS. */ @@ -173,10 +415,6 @@ static int gdlm_create_lp(struct gdlm_ls *ls, struct lm_lockname *name, make_strname(name, &lp->strname); lp->ls = ls; lp->cur = DLM_LOCK_IV; - lp->lvb = NULL; - lp->hold_null = NULL; - INIT_LIST_HEAD(&lp->clist); - INIT_LIST_HEAD(&lp->blist); INIT_LIST_HEAD(&lp->delay_list); spin_lock(&ls->async_lock); @@ -188,26 +426,6 @@ static int gdlm_create_lp(struct gdlm_ls *ls, struct lm_lockname *name, return 0; } -void gdlm_delete_lp(struct gdlm_lock *lp) -{ - struct gdlm_ls *ls = lp->ls; - - spin_lock(&ls->async_lock); - if (!list_empty(&lp->clist)) - list_del_init(&lp->clist); - if (!list_empty(&lp->blist)) - list_del_init(&lp->blist); - if (!list_empty(&lp->delay_list)) - list_del_init(&lp->delay_list); - gdlm_assert(!list_empty(&lp->all_list), "%x,%llx", lp->lockname.ln_type, - (unsigned long long)lp->lockname.ln_number); - list_del_init(&lp->all_list); - ls->all_locks_count--; - spin_unlock(&ls->async_lock); - - kfree(lp); -} - int gdlm_get_lock(void *lockspace, struct lm_lockname *name, void **lockp) { @@ -261,7 +479,7 @@ unsigned int gdlm_do_lock(struct gdlm_lock *lp) if ((error == -EAGAIN) && (lp->lkf & DLM_LKF_NOQUEUE)) { lp->lksb.sb_status = -EAGAIN; - queue_complete(lp); + gdlm_ast(lp); error = 0; } @@ -308,6 +526,9 @@ unsigned int gdlm_lock(void *lock, unsigned int cur_state, { struct gdlm_lock *lp = lock; + if (req_state == LM_ST_UNLOCKED) + return gdlm_unlock(lock, cur_state); + if (req_state == LM_ST_UNLOCKED) return gdlm_unlock(lock, cur_state); @@ -354,7 +575,7 @@ void gdlm_cancel(void *lock) if (delay_list) { set_bit(LFL_CANCEL, &lp->flags); set_bit(LFL_ACTIVE, &lp->flags); - queue_complete(lp); + gdlm_ast(lp); return; } diff --git a/fs/gfs2/locking/dlm/lock_dlm.h b/fs/gfs2/locking/dlm/lock_dlm.h index a243cf69c54e..ad944c64eab1 100644 --- a/fs/gfs2/locking/dlm/lock_dlm.h +++ b/fs/gfs2/locking/dlm/lock_dlm.h @@ -72,15 +72,12 @@ struct gdlm_ls { int recover_jid_done; int recover_jid_status; spinlock_t async_lock; - struct list_head complete; - struct list_head blocking; struct list_head delayed; struct list_head submit; struct list_head all_locks; u32 all_locks_count; wait_queue_head_t wait_control; - struct task_struct *thread1; - struct task_struct *thread2; + struct task_struct *thread; wait_queue_head_t thread_wait; unsigned long drop_time; int drop_locks_count; @@ -117,10 +114,6 @@ struct gdlm_lock { u32 lkf; /* dlm flags DLM_LKF_ */ unsigned long flags; /* lock_dlm flags LFL_ */ - int bast_mode; /* protected by async_lock */ - - struct list_head clist; /* complete */ - struct list_head blist; /* blocking */ struct list_head delay_list; /* delayed */ struct list_head all_list; /* all locks for the fs */ struct gdlm_lock *hold_null; /* NL lock for hold_lvb */ @@ -159,11 +152,8 @@ void gdlm_release_threads(struct gdlm_ls *); /* lock.c */ -s16 gdlm_make_lmstate(s16); -void gdlm_queue_delayed(struct gdlm_lock *); void gdlm_submit_delayed(struct gdlm_ls *); int gdlm_release_all_locks(struct gdlm_ls *); -void gdlm_delete_lp(struct gdlm_lock *); unsigned int gdlm_do_lock(struct gdlm_lock *); int gdlm_get_lock(void *, struct lm_lockname *, void **); diff --git a/fs/gfs2/locking/dlm/mount.c b/fs/gfs2/locking/dlm/mount.c index 470bdf650b50..0628520a445f 100644 --- a/fs/gfs2/locking/dlm/mount.c +++ b/fs/gfs2/locking/dlm/mount.c @@ -28,15 +28,11 @@ static struct gdlm_ls *init_gdlm(lm_callback_t cb, struct gfs2_sbd *sdp, ls->sdp = sdp; ls->fsflags = flags; spin_lock_init(&ls->async_lock); - INIT_LIST_HEAD(&ls->complete); - INIT_LIST_HEAD(&ls->blocking); INIT_LIST_HEAD(&ls->delayed); INIT_LIST_HEAD(&ls->submit); INIT_LIST_HEAD(&ls->all_locks); init_waitqueue_head(&ls->thread_wait); init_waitqueue_head(&ls->wait_control); - ls->thread1 = NULL; - ls->thread2 = NULL; ls->drop_time = jiffies; ls->jid = -1; diff --git a/fs/gfs2/locking/dlm/thread.c b/fs/gfs2/locking/dlm/thread.c index e53db6fd28ab..f30350abd62f 100644 --- a/fs/gfs2/locking/dlm/thread.c +++ b/fs/gfs2/locking/dlm/thread.c @@ -9,255 +9,12 @@ #include "lock_dlm.h" -/* A lock placed on this queue is re-submitted to DLM as soon as the lock_dlm - thread gets to it. */ - -static void queue_submit(struct gdlm_lock *lp) -{ - struct gdlm_ls *ls = lp->ls; - - spin_lock(&ls->async_lock); - list_add_tail(&lp->delay_list, &ls->submit); - spin_unlock(&ls->async_lock); - wake_up(&ls->thread_wait); -} - -static void process_blocking(struct gdlm_lock *lp, int bast_mode) -{ - struct gdlm_ls *ls = lp->ls; - unsigned int cb = 0; - - switch (gdlm_make_lmstate(bast_mode)) { - case LM_ST_EXCLUSIVE: - cb = LM_CB_NEED_E; - break; - case LM_ST_DEFERRED: - cb = LM_CB_NEED_D; - break; - case LM_ST_SHARED: - cb = LM_CB_NEED_S; - break; - default: - gdlm_assert(0, "unknown bast mode %u", lp->bast_mode); - } - - ls->fscb(ls->sdp, cb, &lp->lockname); -} - -static void wake_up_ast(struct gdlm_lock *lp) -{ - clear_bit(LFL_AST_WAIT, &lp->flags); - smp_mb__after_clear_bit(); - wake_up_bit(&lp->flags, LFL_AST_WAIT); -} - -static void process_complete(struct gdlm_lock *lp) -{ - struct gdlm_ls *ls = lp->ls; - struct lm_async_cb acb; - s16 prev_mode = lp->cur; - - memset(&acb, 0, sizeof(acb)); - - if (lp->lksb.sb_status == -DLM_ECANCEL) { - log_info("complete dlm cancel %x,%llx flags %lx", - lp->lockname.ln_type, - (unsigned long long)lp->lockname.ln_number, - lp->flags); - - lp->req = lp->cur; - acb.lc_ret |= LM_OUT_CANCELED; - if (lp->cur == DLM_LOCK_IV) - lp->lksb.sb_lkid = 0; - goto out; - } - - if (test_and_clear_bit(LFL_DLM_UNLOCK, &lp->flags)) { - if (lp->lksb.sb_status != -DLM_EUNLOCK) { - log_info("unlock sb_status %d %x,%llx flags %lx", - lp->lksb.sb_status, lp->lockname.ln_type, - (unsigned long long)lp->lockname.ln_number, - lp->flags); - return; - } - - lp->cur = DLM_LOCK_IV; - lp->req = DLM_LOCK_IV; - lp->lksb.sb_lkid = 0; - - if (test_and_clear_bit(LFL_UNLOCK_DELETE, &lp->flags)) { - gdlm_delete_lp(lp); - return; - } - goto out; - } - - if (lp->lksb.sb_flags & DLM_SBF_VALNOTVALID) - memset(lp->lksb.sb_lvbptr, 0, GDLM_LVB_SIZE); - - if (lp->lksb.sb_flags & DLM_SBF_ALTMODE) { - if (lp->req == DLM_LOCK_PR) - lp->req = DLM_LOCK_CW; - else if (lp->req == DLM_LOCK_CW) - lp->req = DLM_LOCK_PR; - } - - /* - * A canceled lock request. The lock was just taken off the delayed - * list and was never even submitted to dlm. - */ - - if (test_and_clear_bit(LFL_CANCEL, &lp->flags)) { - log_info("complete internal cancel %x,%llx", - lp->lockname.ln_type, - (unsigned long long)lp->lockname.ln_number); - lp->req = lp->cur; - acb.lc_ret |= LM_OUT_CANCELED; - goto out; - } - - /* - * An error occured. - */ - - if (lp->lksb.sb_status) { - /* a "normal" error */ - if ((lp->lksb.sb_status == -EAGAIN) && - (lp->lkf & DLM_LKF_NOQUEUE)) { - lp->req = lp->cur; - if (lp->cur == DLM_LOCK_IV) - lp->lksb.sb_lkid = 0; - goto out; - } - - /* this could only happen with cancels I think */ - log_info("ast sb_status %d %x,%llx flags %lx", - lp->lksb.sb_status, lp->lockname.ln_type, - (unsigned long long)lp->lockname.ln_number, - lp->flags); - if (lp->lksb.sb_status == -EDEADLOCK && - lp->ls->fsflags & LM_MFLAG_CONV_NODROP) { - lp->req = lp->cur; - acb.lc_ret |= LM_OUT_CONV_DEADLK; - if (lp->cur == DLM_LOCK_IV) - lp->lksb.sb_lkid = 0; - goto out; - } else - return; - } - - /* - * This is an AST for an EX->EX conversion for sync_lvb from GFS. - */ - - if (test_and_clear_bit(LFL_SYNC_LVB, &lp->flags)) { - wake_up_ast(lp); - return; - } - - /* - * A lock has been demoted to NL because it initially completed during - * BLOCK_LOCKS. Now it must be requested in the originally requested - * mode. - */ - - if (test_and_clear_bit(LFL_REREQUEST, &lp->flags)) { - gdlm_assert(lp->req == DLM_LOCK_NL, "%x,%llx", - lp->lockname.ln_type, - (unsigned long long)lp->lockname.ln_number); - gdlm_assert(lp->prev_req > DLM_LOCK_NL, "%x,%llx", - lp->lockname.ln_type, - (unsigned long long)lp->lockname.ln_number); - - lp->cur = DLM_LOCK_NL; - lp->req = lp->prev_req; - lp->prev_req = DLM_LOCK_IV; - lp->lkf &= ~DLM_LKF_CONVDEADLK; - - set_bit(LFL_NOCACHE, &lp->flags); - - if (test_bit(DFL_BLOCK_LOCKS, &ls->flags) && - !test_bit(LFL_NOBLOCK, &lp->flags)) - gdlm_queue_delayed(lp); - else - queue_submit(lp); - return; - } - - /* - * A request is granted during dlm recovery. It may be granted - * because the locks of a failed node were cleared. In that case, - * there may be inconsistent data beneath this lock and we must wait - * for recovery to complete to use it. When gfs recovery is done this - * granted lock will be converted to NL and then reacquired in this - * granted state. - */ - - if (test_bit(DFL_BLOCK_LOCKS, &ls->flags) && - !test_bit(LFL_NOBLOCK, &lp->flags) && - lp->req != DLM_LOCK_NL) { - - lp->cur = lp->req; - lp->prev_req = lp->req; - lp->req = DLM_LOCK_NL; - lp->lkf |= DLM_LKF_CONVERT; - lp->lkf &= ~DLM_LKF_CONVDEADLK; - - log_debug("rereq %x,%llx id %x %d,%d", - lp->lockname.ln_type, - (unsigned long long)lp->lockname.ln_number, - lp->lksb.sb_lkid, lp->cur, lp->req); - - set_bit(LFL_REREQUEST, &lp->flags); - queue_submit(lp); - return; - } - - /* - * DLM demoted the lock to NL before it was granted so GFS must be - * told it cannot cache data for this lock. - */ - - if (lp->lksb.sb_flags & DLM_SBF_DEMOTED) - set_bit(LFL_NOCACHE, &lp->flags); - -out: - /* - * This is an internal lock_dlm lock - */ - - if (test_bit(LFL_INLOCK, &lp->flags)) { - clear_bit(LFL_NOBLOCK, &lp->flags); - lp->cur = lp->req; - wake_up_ast(lp); - return; - } - - /* - * Normal completion of a lock request. Tell GFS it now has the lock. - */ - - clear_bit(LFL_NOBLOCK, &lp->flags); - lp->cur = lp->req; - - acb.lc_name = lp->lockname; - acb.lc_ret |= gdlm_make_lmstate(lp->cur); - - if (!test_and_clear_bit(LFL_NOCACHE, &lp->flags) && - (lp->cur > DLM_LOCK_NL) && (prev_mode > DLM_LOCK_NL)) - acb.lc_ret |= LM_OUT_CACHEABLE; - - ls->fscb(ls->sdp, LM_CB_ASYNC, &acb); -} - -static inline int no_work(struct gdlm_ls *ls, int blocking) +static inline int no_work(struct gdlm_ls *ls) { int ret; spin_lock(&ls->async_lock); - ret = list_empty(&ls->complete) && list_empty(&ls->submit); - if (ret && blocking) - ret = list_empty(&ls->blocking); + ret = list_empty(&ls->submit); spin_unlock(&ls->async_lock); return ret; @@ -276,100 +33,55 @@ static inline int check_drop(struct gdlm_ls *ls) return 0; } -static int gdlm_thread(void *data, int blist) +static int gdlm_thread(void *data) { struct gdlm_ls *ls = (struct gdlm_ls *) data; struct gdlm_lock *lp = NULL; - uint8_t complete, blocking, submit, drop; - - /* Only thread1 is allowed to do blocking callbacks since gfs - may wait for a completion callback within a blocking cb. */ while (!kthread_should_stop()) { wait_event_interruptible(ls->thread_wait, - !no_work(ls, blist) || kthread_should_stop()); - - complete = blocking = submit = drop = 0; + !no_work(ls) || kthread_should_stop()); spin_lock(&ls->async_lock); - if (blist && !list_empty(&ls->blocking)) { - lp = list_entry(ls->blocking.next, struct gdlm_lock, - blist); - list_del_init(&lp->blist); - blocking = lp->bast_mode; - lp->bast_mode = 0; - } else if (!list_empty(&ls->complete)) { - lp = list_entry(ls->complete.next, struct gdlm_lock, - clist); - list_del_init(&lp->clist); - complete = 1; - } else if (!list_empty(&ls->submit)) { + if (!list_empty(&ls->submit)) { lp = list_entry(ls->submit.next, struct gdlm_lock, delay_list); list_del_init(&lp->delay_list); - submit = 1; - } - - drop = check_drop(ls); - spin_unlock(&ls->async_lock); - - if (complete) - process_complete(lp); - - else if (blocking) - process_blocking(lp, blocking); - - else if (submit) + spin_unlock(&ls->async_lock); gdlm_do_lock(lp); - - if (drop) + spin_lock(&ls->async_lock); + } + /* Does this ever happen these days? I hope not anyway */ + if (check_drop(ls)) { + spin_unlock(&ls->async_lock); ls->fscb(ls->sdp, LM_CB_DROPLOCKS, NULL); - - schedule(); + spin_lock(&ls->async_lock); + } + spin_unlock(&ls->async_lock); } return 0; } -static int gdlm_thread1(void *data) -{ - return gdlm_thread(data, 1); -} - -static int gdlm_thread2(void *data) -{ - return gdlm_thread(data, 0); -} - int gdlm_init_threads(struct gdlm_ls *ls) { struct task_struct *p; int error; - p = kthread_run(gdlm_thread1, ls, "lock_dlm1"); - error = IS_ERR(p); - if (error) { - log_error("can't start lock_dlm1 thread %d", error); - return error; - } - ls->thread1 = p; - - p = kthread_run(gdlm_thread2, ls, "lock_dlm2"); + p = kthread_run(gdlm_thread, ls, "lock_dlm"); error = IS_ERR(p); if (error) { - log_error("can't start lock_dlm2 thread %d", error); - kthread_stop(ls->thread1); + log_error("can't start lock_dlm thread %d", error); return error; } - ls->thread2 = p; + ls->thread = p; return 0; } void gdlm_release_threads(struct gdlm_ls *ls) { - kthread_stop(ls->thread1); - kthread_stop(ls->thread2); + kthread_stop(ls->thread); } -- cgit v1.2.3 From 048bca223739368aa5b9ce7cfb1d576c32d66cc7 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Fri, 23 May 2008 14:46:04 +0100 Subject: [GFS2] No lock_nolock This patch merges the lock_nolock module into GFS2 itself. As well as removing some of the overhead of the module, it also means that its now impossible to build GFS2 without a lock module (which would be a pointless thing to do anyway). We also plan to merge lock_dlm into GFS2 in the future, but that is a more tricky task, and will therefore be a separate patch. Signed-off-by: Steven Whitehouse Cc: David Teigland --- fs/gfs2/Kconfig | 18 +-- fs/gfs2/Makefile | 1 - fs/gfs2/glock.c | 15 ++- fs/gfs2/locking.c | 52 ++++++++- fs/gfs2/locking/nolock/Makefile | 3 - fs/gfs2/locking/nolock/main.c | 240 ---------------------------------------- fs/gfs2/ops_fstype.c | 5 +- fs/gfs2/recovery.c | 3 + 8 files changed, 71 insertions(+), 266 deletions(-) delete mode 100644 fs/gfs2/locking/nolock/Makefile delete mode 100644 fs/gfs2/locking/nolock/main.c diff --git a/fs/gfs2/Kconfig b/fs/gfs2/Kconfig index 7f7947e3dfbb..ab2f57e3fb87 100644 --- a/fs/gfs2/Kconfig +++ b/fs/gfs2/Kconfig @@ -14,23 +14,11 @@ config GFS2_FS GFS is perfect consistency -- changes made to the filesystem on one machine show up immediately on all other machines in the cluster. - To use the GFS2 filesystem, you will need to enable one or more of - the below locking modules. Documentation and utilities for GFS2 can + To use the GFS2 filesystem in a cluster, you will need to enable + the locking module below. Documentation and utilities for GFS2 can be found here: http://sources.redhat.com/cluster -config GFS2_FS_LOCKING_NOLOCK - tristate "GFS2 \"nolock\" locking module" - depends on GFS2_FS - help - Single node locking module for GFS2. - - Use this module if you want to use GFS2 on a single node without - its clustering features. You can still take advantage of the - large file support, and upgrade to running a full cluster later on - if required. - - If you will only be using GFS2 in cluster mode, you do not need this - module. + The "nolock" lock module is now built in to GFS2 by default. config GFS2_FS_LOCKING_DLM tristate "GFS2 DLM locking module" diff --git a/fs/gfs2/Makefile b/fs/gfs2/Makefile index e2350df02a07..ec65851ec80a 100644 --- a/fs/gfs2/Makefile +++ b/fs/gfs2/Makefile @@ -5,6 +5,5 @@ gfs2-y := acl.o bmap.o daemon.o dir.o eaops.o eattr.o glock.o \ ops_fstype.o ops_inode.o ops_super.o quota.o \ recovery.o rgrp.o super.o sys.o trans.o util.o -obj-$(CONFIG_GFS2_FS_LOCKING_NOLOCK) += locking/nolock/ obj-$(CONFIG_GFS2_FS_LOCKING_DLM) += locking/dlm/ diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index 519a54cc0b7b..be7ed503f012 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -153,7 +153,7 @@ static void glock_free(struct gfs2_glock *gl) struct gfs2_sbd *sdp = gl->gl_sbd; struct inode *aspace = gl->gl_aspace; - if (likely(!test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) + if (sdp->sd_lockstruct.ls_ops->lm_put_lock) sdp->sd_lockstruct.ls_ops->lm_put_lock(gl->gl_lock); if (aspace) @@ -488,6 +488,10 @@ static unsigned int gfs2_lm_lock(struct gfs2_sbd *sdp, void *lock, unsigned int flags) { int ret = LM_OUT_ERROR; + + if (!sdp->sd_lockstruct.ls_ops->lm_lock) + return req_state == LM_ST_UNLOCKED ? 0 : req_state; + if (likely(!test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) ret = sdp->sd_lockstruct.ls_ops->lm_lock(lock, cur_state, req_state, flags); @@ -631,6 +635,8 @@ static int gfs2_lm_get_lock(struct gfs2_sbd *sdp, struct lm_lockname *name, void **lockp) { int error = -EIO; + if (!sdp->sd_lockstruct.ls_ops->lm_get_lock) + return 0; if (likely(!test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) error = sdp->sd_lockstruct.ls_ops->lm_get_lock( sdp->sd_lockstruct.ls_lockspace, name, lockp); @@ -910,7 +916,8 @@ do_cancel: gh = list_entry(gl->gl_holders.next, struct gfs2_holder, gh_list); if (!(gh->gh_flags & LM_FLAG_PRIORITY)) { spin_unlock(&gl->gl_spin); - sdp->sd_lockstruct.ls_ops->lm_cancel(gl->gl_lock); + if (sdp->sd_lockstruct.ls_ops->lm_cancel) + sdp->sd_lockstruct.ls_ops->lm_cancel(gl->gl_lock); spin_lock(&gl->gl_spin); } return; @@ -1187,6 +1194,8 @@ void gfs2_glock_dq_uninit_m(unsigned int num_gh, struct gfs2_holder *ghs) static int gfs2_lm_hold_lvb(struct gfs2_sbd *sdp, void *lock, char **lvbp) { int error = -EIO; + if (!sdp->sd_lockstruct.ls_ops->lm_hold_lvb) + return 0; if (likely(!test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) error = sdp->sd_lockstruct.ls_ops->lm_hold_lvb(lock, lvbp); return error; @@ -1226,7 +1235,7 @@ void gfs2_lvb_unhold(struct gfs2_glock *gl) gfs2_glock_hold(gl); gfs2_assert(gl->gl_sbd, atomic_read(&gl->gl_lvb_count) > 0); if (atomic_dec_and_test(&gl->gl_lvb_count)) { - if (likely(!test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) + if (sdp->sd_lockstruct.ls_ops->lm_unhold_lvb) sdp->sd_lockstruct.ls_ops->lm_unhold_lvb(gl->gl_lock, gl->gl_lvb); gl->gl_lvb = NULL; gfs2_glock_put(gl); diff --git a/fs/gfs2/locking.c b/fs/gfs2/locking.c index 663fee728783..a4a367aa5cc1 100644 --- a/fs/gfs2/locking.c +++ b/fs/gfs2/locking.c @@ -23,12 +23,54 @@ struct lmh_wrapper { const struct lm_lockops *lw_ops; }; +static int nolock_mount(char *table_name, char *host_data, + lm_callback_t cb, void *cb_data, + unsigned int min_lvb_size, int flags, + struct lm_lockstruct *lockstruct, + struct kobject *fskobj); + /* List of registered low-level locking protocols. A file system selects one of them by name at mount time, e.g. lock_nolock, lock_dlm. */ +static const struct lm_lockops nolock_ops = { + .lm_proto_name = "lock_nolock", + .lm_mount = nolock_mount, +}; + +static struct lmh_wrapper nolock_proto = { + .lw_list = LIST_HEAD_INIT(nolock_proto.lw_list), + .lw_ops = &nolock_ops, +}; + static LIST_HEAD(lmh_list); static DEFINE_MUTEX(lmh_lock); +static int nolock_mount(char *table_name, char *host_data, + lm_callback_t cb, void *cb_data, + unsigned int min_lvb_size, int flags, + struct lm_lockstruct *lockstruct, + struct kobject *fskobj) +{ + char *c; + unsigned int jid; + + c = strstr(host_data, "jid="); + if (!c) + jid = 0; + else { + c += 4; + sscanf(c, "%u", &jid); + } + + lockstruct->ls_jid = jid; + lockstruct->ls_first = 1; + lockstruct->ls_lvb_size = min_lvb_size; + lockstruct->ls_ops = &nolock_ops; + lockstruct->ls_flags = LM_LSFLAG_LOCAL; + + return 0; +} + /** * gfs2_register_lockproto - Register a low-level locking protocol * @proto: the protocol definition @@ -116,9 +158,13 @@ int gfs2_mount_lockproto(char *proto_name, char *table_name, char *host_data, int try = 0; int error, found; + retry: mutex_lock(&lmh_lock); + if (list_empty(&nolock_proto.lw_list)) + list_add(&lmh_list, &nolock_proto.lw_list); + found = 0; list_for_each_entry(lw, &lmh_list, lw_list) { if (!strcmp(lw->lw_ops->lm_proto_name, proto_name)) { @@ -139,7 +185,8 @@ retry: goto out; } - if (!try_module_get(lw->lw_ops->lm_owner)) { + if (lw->lw_ops->lm_owner && + !try_module_get(lw->lw_ops->lm_owner)) { try = 0; mutex_unlock(&lmh_lock); msleep(1000); @@ -158,7 +205,8 @@ out: void gfs2_unmount_lockproto(struct lm_lockstruct *lockstruct) { mutex_lock(&lmh_lock); - lockstruct->ls_ops->lm_unmount(lockstruct->ls_lockspace); + if (lockstruct->ls_ops->lm_unmount) + lockstruct->ls_ops->lm_unmount(lockstruct->ls_lockspace); if (lockstruct->ls_ops->lm_owner) module_put(lockstruct->ls_ops->lm_owner); mutex_unlock(&lmh_lock); diff --git a/fs/gfs2/locking/nolock/Makefile b/fs/gfs2/locking/nolock/Makefile deleted file mode 100644 index 35e9730bc3a8..000000000000 --- a/fs/gfs2/locking/nolock/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_GFS2_FS_LOCKING_NOLOCK) += lock_nolock.o -lock_nolock-y := main.o - diff --git a/fs/gfs2/locking/nolock/main.c b/fs/gfs2/locking/nolock/main.c deleted file mode 100644 index 627bfb79bc8c..000000000000 --- a/fs/gfs2/locking/nolock/main.c +++ /dev/null @@ -1,240 +0,0 @@ -/* - * Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved. - * Copyright (C) 2004-2005 Red Hat, Inc. All rights reserved. - * - * This copyrighted material is made available to anyone wishing to use, - * modify, copy, or redistribute it subject to the terms and conditions - * of the GNU General Public License version 2. - */ - -#include -#include -#include -#include -#include -#include - -struct nolock_lockspace { - unsigned int nl_lvb_size; -}; - -static const struct lm_lockops nolock_ops; - -static int nolock_mount(char *table_name, char *host_data, - lm_callback_t cb, void *cb_data, - unsigned int min_lvb_size, int flags, - struct lm_lockstruct *lockstruct, - struct kobject *fskobj) -{ - char *c; - unsigned int jid; - struct nolock_lockspace *nl; - - c = strstr(host_data, "jid="); - if (!c) - jid = 0; - else { - c += 4; - sscanf(c, "%u", &jid); - } - - nl = kzalloc(sizeof(struct nolock_lockspace), GFP_KERNEL); - if (!nl) - return -ENOMEM; - - nl->nl_lvb_size = min_lvb_size; - - lockstruct->ls_jid = jid; - lockstruct->ls_first = 1; - lockstruct->ls_lvb_size = min_lvb_size; - lockstruct->ls_lockspace = nl; - lockstruct->ls_ops = &nolock_ops; - lockstruct->ls_flags = LM_LSFLAG_LOCAL; - - return 0; -} - -static void nolock_others_may_mount(void *lockspace) -{ -} - -static void nolock_unmount(void *lockspace) -{ - struct nolock_lockspace *nl = lockspace; - kfree(nl); -} - -static void nolock_withdraw(void *lockspace) -{ -} - -/** - * nolock_get_lock - get a lm_lock_t given a descripton of the lock - * @lockspace: the lockspace the lock lives in - * @name: the name of the lock - * @lockp: return the lm_lock_t here - * - * Returns: 0 on success, -EXXX on failure - */ - -static int nolock_get_lock(void *lockspace, struct lm_lockname *name, - void **lockp) -{ - *lockp = lockspace; - return 0; -} - -/** - * nolock_put_lock - get rid of a lock structure - * @lock: the lock to throw away - * - */ - -static void nolock_put_lock(void *lock) -{ -} - -/** - * nolock_lock - acquire a lock - * @lock: the lock to manipulate - * @cur_state: the current state - * @req_state: the requested state - * @flags: modifier flags - * - * Returns: A bitmap of LM_OUT_* - */ - -static unsigned int nolock_lock(void *lock, unsigned int cur_state, - unsigned int req_state, unsigned int flags) -{ - if (req_state == LM_ST_UNLOCKED) - return 0; - return req_state | LM_OUT_CACHEABLE; -} - -/** - * nolock_unlock - unlock a lock - * @lock: the lock to manipulate - * @cur_state: the current state - * - * Returns: 0 - */ - -static unsigned int nolock_unlock(void *lock, unsigned int cur_state) -{ - return 0; -} - -static void nolock_cancel(void *lock) -{ -} - -/** - * nolock_hold_lvb - hold on to a lock value block - * @lock: the lock the LVB is associated with - * @lvbp: return the lm_lvb_t here - * - * Returns: 0 on success, -EXXX on failure - */ - -static int nolock_hold_lvb(void *lock, char **lvbp) -{ - struct nolock_lockspace *nl = lock; - int error = 0; - - *lvbp = kzalloc(nl->nl_lvb_size, GFP_NOFS); - if (!*lvbp) - error = -ENOMEM; - - return error; -} - -/** - * nolock_unhold_lvb - release a LVB - * @lock: the lock the LVB is associated with - * @lvb: the lock value block - * - */ - -static void nolock_unhold_lvb(void *lock, char *lvb) -{ - kfree(lvb); -} - -static int nolock_plock_get(void *lockspace, struct lm_lockname *name, - struct file *file, struct file_lock *fl) -{ - posix_test_lock(file, fl); - - return 0; -} - -static int nolock_plock(void *lockspace, struct lm_lockname *name, - struct file *file, int cmd, struct file_lock *fl) -{ - int error; - error = posix_lock_file_wait(file, fl); - return error; -} - -static int nolock_punlock(void *lockspace, struct lm_lockname *name, - struct file *file, struct file_lock *fl) -{ - int error; - error = posix_lock_file_wait(file, fl); - return error; -} - -static void nolock_recovery_done(void *lockspace, unsigned int jid, - unsigned int message) -{ -} - -static const struct lm_lockops nolock_ops = { - .lm_proto_name = "lock_nolock", - .lm_mount = nolock_mount, - .lm_others_may_mount = nolock_others_may_mount, - .lm_unmount = nolock_unmount, - .lm_withdraw = nolock_withdraw, - .lm_get_lock = nolock_get_lock, - .lm_put_lock = nolock_put_lock, - .lm_lock = nolock_lock, - .lm_unlock = nolock_unlock, - .lm_cancel = nolock_cancel, - .lm_hold_lvb = nolock_hold_lvb, - .lm_unhold_lvb = nolock_unhold_lvb, - .lm_plock_get = nolock_plock_get, - .lm_plock = nolock_plock, - .lm_punlock = nolock_punlock, - .lm_recovery_done = nolock_recovery_done, - .lm_owner = THIS_MODULE, -}; - -static int __init init_nolock(void) -{ - int error; - - error = gfs2_register_lockproto(&nolock_ops); - if (error) { - printk(KERN_WARNING - "lock_nolock: can't register protocol: %d\n", error); - return error; - } - - printk(KERN_INFO - "Lock_Nolock (built %s %s) installed\n", __DATE__, __TIME__); - return 0; -} - -static void __exit exit_nolock(void) -{ - gfs2_unregister_lockproto(&nolock_ops); -} - -module_init(init_nolock); -module_exit(exit_nolock); - -MODULE_DESCRIPTION("GFS Nolock Locking Module"); -MODULE_AUTHOR("Red Hat, Inc."); -MODULE_LICENSE("GPL"); - diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index b2028c82e8d1..9bd97c5543bd 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -364,6 +364,8 @@ static int map_journal_extents(struct gfs2_sbd *sdp) static void gfs2_lm_others_may_mount(struct gfs2_sbd *sdp) { + if (!sdp->sd_lockstruct.ls_ops->lm_others_may_mount) + return; if (likely(!test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) sdp->sd_lockstruct.ls_ops->lm_others_may_mount( sdp->sd_lockstruct.ls_lockspace); @@ -741,8 +743,7 @@ static int gfs2_lm_mount(struct gfs2_sbd *sdp, int silent) goto out; } - if (gfs2_assert_warn(sdp, sdp->sd_lockstruct.ls_lockspace) || - gfs2_assert_warn(sdp, sdp->sd_lockstruct.ls_ops) || + if (gfs2_assert_warn(sdp, sdp->sd_lockstruct.ls_ops) || gfs2_assert_warn(sdp, sdp->sd_lockstruct.ls_lvb_size >= GFS2_MIN_LVB_SIZE)) { gfs2_unmount_lockproto(&sdp->sd_lockstruct); diff --git a/fs/gfs2/recovery.c b/fs/gfs2/recovery.c index fdd3f0f16d0d..d5e91f4f6a0b 100644 --- a/fs/gfs2/recovery.c +++ b/fs/gfs2/recovery.c @@ -428,6 +428,9 @@ static int clean_journal(struct gfs2_jdesc *jd, struct gfs2_log_header_host *hea static void gfs2_lm_recovery_done(struct gfs2_sbd *sdp, unsigned int jid, unsigned int message) { + if (!sdp->sd_lockstruct.ls_ops->lm_recovery_done) + return; + if (likely(!test_bit(SDF_SHUTDOWN, &sdp->sd_flags))) sdp->sd_lockstruct.ls_ops->lm_recovery_done( sdp->sd_lockstruct.ls_lockspace, jid, message); -- cgit v1.2.3 From 2d81afb87972013b43b055b4711dc75fdeeb9ba8 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 29 May 2008 18:27:51 -0700 Subject: [GFS2] trivial sparse lock annotations Annotate the &sdp->sd_log_lock. Signed-off-by: Harvey Harrison Signed-off-by: Steven Whitehouse --- fs/gfs2/log.c | 2 ++ fs/gfs2/log.h | 2 ++ 2 files changed, 4 insertions(+) diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c index 548264b1836d..6c6af9f5e3ab 100644 --- a/fs/gfs2/log.c +++ b/fs/gfs2/log.c @@ -87,6 +87,8 @@ void gfs2_remove_from_ail(struct gfs2_bufdata *bd) */ static void gfs2_ail1_start_one(struct gfs2_sbd *sdp, struct gfs2_ail *ai) +__releases(&sdp->sd_log_lock) +__acquires(&sdp->sd_log_lock) { struct gfs2_bufdata *bd, *s; struct buffer_head *bh; diff --git a/fs/gfs2/log.h b/fs/gfs2/log.h index 771152816508..7c64510ccfd2 100644 --- a/fs/gfs2/log.h +++ b/fs/gfs2/log.h @@ -21,6 +21,7 @@ */ static inline void gfs2_log_lock(struct gfs2_sbd *sdp) +__acquires(&sdp->sd_log_lock) { spin_lock(&sdp->sd_log_lock); } @@ -32,6 +33,7 @@ static inline void gfs2_log_lock(struct gfs2_sbd *sdp) */ static inline void gfs2_log_unlock(struct gfs2_sbd *sdp) +__releases(&sdp->sd_log_lock) { spin_unlock(&sdp->sd_log_lock); } -- cgit v1.2.3 From 80274737220f8c5ea75696dde4c5c7feba39456f Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 2 Jun 2008 09:08:47 +0100 Subject: [GFS2] Fix ordering of args for list_add The patch to remove lock_nolock managed to get the arguments of this list_add backwards. This fixes it. Signed-off-by: Steven Whitehouse --- fs/gfs2/locking.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/gfs2/locking.c b/fs/gfs2/locking.c index a4a367aa5cc1..523243a13a21 100644 --- a/fs/gfs2/locking.c +++ b/fs/gfs2/locking.c @@ -163,7 +163,7 @@ retry: mutex_lock(&lmh_lock); if (list_empty(&nolock_proto.lw_list)) - list_add(&lmh_list, &nolock_proto.lw_list); + list_add(&nolock_proto.lw_list, &lmh_list); found = 0; list_for_each_entry(lw, &lmh_list, lw_list) { -- cgit v1.2.3 From 01b7c7ae88a6376c508b35a22bb61e04cb1b37f0 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 2 Jun 2008 09:14:54 +0100 Subject: [GFS2] Revise readpage locking The previous attempt to fix the locking in readpage failed due to the use of a "try lock" which resulted in occasional high cpu usage during testing (due to repeated tries) and also it did not resolve all the ordering problems wrt the transaction lock (although it did solve all the inode lock ordering problems). This patch avoids the problem by unlocking the page and getting the locks in the correct order. This means that we have to retest the page to ensure that it hasn't changed when we relock the page. This now passes the tests which were previously failing. Signed-off-by: Steven Whitehouse --- fs/gfs2/ops_address.c | 29 ++++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-) diff --git a/fs/gfs2/ops_address.c b/fs/gfs2/ops_address.c index 2b556dd034bb..e64a1b04117a 100644 --- a/fs/gfs2/ops_address.c +++ b/fs/gfs2/ops_address.c @@ -499,31 +499,34 @@ static int __gfs2_readpage(void *file, struct page *page) * @file: The file to read * @page: The page of the file * - * This deals with the locking required. We use a trylock in order to - * avoid the page lock / glock ordering problems returning AOP_TRUNCATED_PAGE - * in the event that we are unable to get the lock. + * This deals with the locking required. We have to unlock and + * relock the page in order to get the locking in the right + * order. */ static int gfs2_readpage(struct file *file, struct page *page) { - struct gfs2_inode *ip = GFS2_I(page->mapping->host); + struct address_space *mapping = page->mapping; + struct gfs2_inode *ip = GFS2_I(mapping->host); struct gfs2_holder gh; int error; - gfs2_holder_init(ip->i_gl, LM_ST_SHARED, GL_ATIME|LM_FLAG_TRY_1CB, &gh); + unlock_page(page); + gfs2_holder_init(ip->i_gl, LM_ST_SHARED, GL_ATIME, &gh); error = gfs2_glock_nq_atime(&gh); - if (unlikely(error)) { - unlock_page(page); + if (unlikely(error)) goto out; - } - error = __gfs2_readpage(file, page); + error = AOP_TRUNCATED_PAGE; + lock_page(page); + if (page->mapping == mapping && !PageUptodate(page)) + error = __gfs2_readpage(file, page); + else + unlock_page(page); gfs2_glock_dq(&gh); out: gfs2_holder_uninit(&gh); - if (error == GLR_TRYFAILED) { - yield(); - return AOP_TRUNCATED_PAGE; - } + if (error && error != AOP_TRUNCATED_PAGE) + lock_page(page); return error; } -- cgit v1.2.3 From 9171f5a991e7613cbee816874ad8c9515dcab50f Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Mon, 9 Jun 2008 12:08:23 -0500 Subject: [GFS2] kernel panic mounting volume This patch fixes Red Hat bugzilla bug 450156. This started with a not-too-improbable mount failure because the locking protocol was never set back to its proper "lock_dlm" after the system was rebooted in the middle of a gfs2_fsck. That left a (purposely) invalid locking protocol in the superblock, which caused an error when the file system was mounted the next time. When there's an error mounting, vfs calls DQUOT_OFF, which calls vfs_quota_off which calls gfs2_sync_fs. Next, gfs2_sync_fs calls gfs2_log_flush passing s_fs_info. But due to the error, s_fs_info had been previously set to NULL, and so we have the kernel oops. My solution in this patch is to test for the NULL value before passing it. I tested this patch and it fixes the problem. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/ops_super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/gfs2/ops_super.c b/fs/gfs2/ops_super.c index 0b7cc920eb89..66907922109f 100644 --- a/fs/gfs2/ops_super.c +++ b/fs/gfs2/ops_super.c @@ -155,7 +155,7 @@ static void gfs2_write_super(struct super_block *sb) static int gfs2_sync_fs(struct super_block *sb, int wait) { sb->s_dirt = 0; - if (wait) + if (wait && sb->s_fs_info) gfs2_log_flush(sb->s_fs_info, NULL); return 0; } -- cgit v1.2.3 From 1bdad606338debc6384b2844f1b53cc436b3ac90 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Tue, 3 Jun 2008 14:09:53 +0100 Subject: [GFS2] Remove remote lock dropping code There are several reasons why this is undesirable: 1. It never happens during normal operation anyway 2. If it does happen it causes performance to be very, very poor 3. It isn't likely to solve the original problem (memory shortage on remote DLM node) it was supposed to solve 4. It uses a bunch of arbitrary constants which are unlikely to be correct for any particular situation and for which the tuning seems to be a black art. 5. In an N node cluster, only 1/N of the dropped locked will actually contribute to solving the problem on average. So all in all we are better off without it. This also makes merging the lock_dlm module into GFS2 a bit easier. Signed-off-by: Steven Whitehouse --- fs/gfs2/gfs2.h | 5 ----- fs/gfs2/glock.c | 12 +++--------- fs/gfs2/glock.h | 2 +- fs/gfs2/locking/dlm/lock_dlm.h | 3 --- fs/gfs2/locking/dlm/mount.c | 3 --- fs/gfs2/locking/dlm/sysfs.c | 13 ------------- fs/gfs2/locking/dlm/thread.c | 19 ------------------- fs/gfs2/ops_fstype.c | 2 +- fs/gfs2/ops_super.c | 2 +- fs/gfs2/sys.c | 14 -------------- include/linux/lm_interface.h | 4 ---- 11 files changed, 6 insertions(+), 73 deletions(-) diff --git a/fs/gfs2/gfs2.h b/fs/gfs2/gfs2.h index 3bb11c0f8b56..ef606e3a5cf4 100644 --- a/fs/gfs2/gfs2.h +++ b/fs/gfs2/gfs2.h @@ -15,11 +15,6 @@ enum { CREATE = 1, }; -enum { - NO_WAIT = 0, - WAIT = 1, -}; - enum { NO_FORCE = 0, FORCE = 1, diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index be7ed503f012..8d5450f3c3ef 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -1316,11 +1316,6 @@ void gfs2_glock_cb(void *cb_data, unsigned int type, void *data) wake_up_process(sdp->sd_recoverd_process); return; - case LM_CB_DROPLOCKS: - gfs2_gl_hash_clear(sdp, NO_WAIT); - gfs2_quota_scan(sdp); - return; - default: gfs2_assert_warn(sdp, 0); return; @@ -1508,11 +1503,10 @@ static void clear_glock(struct gfs2_glock *gl) * @sdp: the filesystem * @wait: wait until it's all gone * - * Called when unmounting the filesystem, or when inter-node lock manager - * requests DROPLOCKS because it is running out of capacity. + * Called when unmounting the filesystem. */ -void gfs2_gl_hash_clear(struct gfs2_sbd *sdp, int wait) +void gfs2_gl_hash_clear(struct gfs2_sbd *sdp) { unsigned long t; unsigned int x; @@ -1527,7 +1521,7 @@ void gfs2_gl_hash_clear(struct gfs2_sbd *sdp, int wait) cont = 1; } - if (!wait || !cont) + if (!cont) break; if (time_after_eq(jiffies, diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h index 7389f8ef0a31..971d92af70fc 100644 --- a/fs/gfs2/glock.h +++ b/fs/gfs2/glock.h @@ -132,7 +132,7 @@ void gfs2_lvb_unhold(struct gfs2_glock *gl); void gfs2_glock_cb(void *cb_data, unsigned int type, void *data); void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl); void gfs2_reclaim_glock(struct gfs2_sbd *sdp); -void gfs2_gl_hash_clear(struct gfs2_sbd *sdp, int wait); +void gfs2_gl_hash_clear(struct gfs2_sbd *sdp); int __init gfs2_glock_init(void); void gfs2_glock_exit(void); diff --git a/fs/gfs2/locking/dlm/lock_dlm.h b/fs/gfs2/locking/dlm/lock_dlm.h index ad944c64eab1..845a27fd303e 100644 --- a/fs/gfs2/locking/dlm/lock_dlm.h +++ b/fs/gfs2/locking/dlm/lock_dlm.h @@ -79,9 +79,6 @@ struct gdlm_ls { wait_queue_head_t wait_control; struct task_struct *thread; wait_queue_head_t thread_wait; - unsigned long drop_time; - int drop_locks_count; - int drop_locks_period; }; enum { diff --git a/fs/gfs2/locking/dlm/mount.c b/fs/gfs2/locking/dlm/mount.c index 0628520a445f..fa31c54c2e67 100644 --- a/fs/gfs2/locking/dlm/mount.c +++ b/fs/gfs2/locking/dlm/mount.c @@ -22,8 +22,6 @@ static struct gdlm_ls *init_gdlm(lm_callback_t cb, struct gfs2_sbd *sdp, if (!ls) return NULL; - ls->drop_locks_count = GDLM_DROP_COUNT; - ls->drop_locks_period = GDLM_DROP_PERIOD; ls->fscb = cb; ls->sdp = sdp; ls->fsflags = flags; @@ -33,7 +31,6 @@ static struct gdlm_ls *init_gdlm(lm_callback_t cb, struct gfs2_sbd *sdp, INIT_LIST_HEAD(&ls->all_locks); init_waitqueue_head(&ls->thread_wait); init_waitqueue_head(&ls->wait_control); - ls->drop_time = jiffies; ls->jid = -1; strncpy(buf, table_name, 256); diff --git a/fs/gfs2/locking/dlm/sysfs.c b/fs/gfs2/locking/dlm/sysfs.c index a4ff271df9ee..4ec571c3d8a9 100644 --- a/fs/gfs2/locking/dlm/sysfs.c +++ b/fs/gfs2/locking/dlm/sysfs.c @@ -114,17 +114,6 @@ static ssize_t recover_status_show(struct gdlm_ls *ls, char *buf) return sprintf(buf, "%d\n", ls->recover_jid_status); } -static ssize_t drop_count_show(struct gdlm_ls *ls, char *buf) -{ - return sprintf(buf, "%d\n", ls->drop_locks_count); -} - -static ssize_t drop_count_store(struct gdlm_ls *ls, const char *buf, size_t len) -{ - ls->drop_locks_count = simple_strtol(buf, NULL, 0); - return len; -} - struct gdlm_attr { struct attribute attr; ssize_t (*show)(struct gdlm_ls *, char *); @@ -144,7 +133,6 @@ GDLM_ATTR(first_done, 0444, first_done_show, NULL); GDLM_ATTR(recover, 0644, recover_show, recover_store); GDLM_ATTR(recover_done, 0444, recover_done_show, NULL); GDLM_ATTR(recover_status, 0444, recover_status_show, NULL); -GDLM_ATTR(drop_count, 0644, drop_count_show, drop_count_store); static struct attribute *gdlm_attrs[] = { &gdlm_attr_proto_name.attr, @@ -157,7 +145,6 @@ static struct attribute *gdlm_attrs[] = { &gdlm_attr_recover.attr, &gdlm_attr_recover_done.attr, &gdlm_attr_recover_status.attr, - &gdlm_attr_drop_count.attr, NULL, }; diff --git a/fs/gfs2/locking/dlm/thread.c b/fs/gfs2/locking/dlm/thread.c index f30350abd62f..38823efd698c 100644 --- a/fs/gfs2/locking/dlm/thread.c +++ b/fs/gfs2/locking/dlm/thread.c @@ -20,19 +20,6 @@ static inline int no_work(struct gdlm_ls *ls) return ret; } -static inline int check_drop(struct gdlm_ls *ls) -{ - if (!ls->drop_locks_count) - return 0; - - if (time_after(jiffies, ls->drop_time + ls->drop_locks_period * HZ)) { - ls->drop_time = jiffies; - if (ls->all_locks_count >= ls->drop_locks_count) - return 1; - } - return 0; -} - static int gdlm_thread(void *data) { struct gdlm_ls *ls = (struct gdlm_ls *) data; @@ -52,12 +39,6 @@ static int gdlm_thread(void *data) gdlm_do_lock(lp); spin_lock(&ls->async_lock); } - /* Does this ever happen these days? I hope not anyway */ - if (check_drop(ls)) { - spin_unlock(&ls->async_lock); - ls->fscb(ls->sdp, LM_CB_DROPLOCKS, NULL); - spin_lock(&ls->async_lock); - } spin_unlock(&ls->async_lock); } diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 9bd97c5543bd..6ba69dd1a729 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -874,7 +874,7 @@ fail_sb: fail_locking: init_locking(sdp, &mount_gh, UNDO); fail_lm: - gfs2_gl_hash_clear(sdp, WAIT); + gfs2_gl_hash_clear(sdp); gfs2_lm_unmount(sdp); while (invalidate_inodes(sb)) yield(); diff --git a/fs/gfs2/ops_super.c b/fs/gfs2/ops_super.c index 66907922109f..f66ea0f7a356 100644 --- a/fs/gfs2/ops_super.c +++ b/fs/gfs2/ops_super.c @@ -126,7 +126,7 @@ static void gfs2_put_super(struct super_block *sb) gfs2_clear_rgrpd(sdp); gfs2_jindex_free(sdp); /* Take apart glock structures and buffer lists */ - gfs2_gl_hash_clear(sdp, WAIT); + gfs2_gl_hash_clear(sdp); /* Unmount the locking protocol */ gfs2_lm_unmount(sdp); diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c index 9ab9fc85ecd0..6f7e2e5858e0 100644 --- a/fs/gfs2/sys.c +++ b/fs/gfs2/sys.c @@ -110,18 +110,6 @@ static ssize_t statfs_sync_store(struct gfs2_sbd *sdp, const char *buf, return len; } -static ssize_t shrink_store(struct gfs2_sbd *sdp, const char *buf, size_t len) -{ - if (!capable(CAP_SYS_ADMIN)) - return -EACCES; - - if (simple_strtol(buf, NULL, 0) != 1) - return -EINVAL; - - gfs2_gl_hash_clear(sdp, NO_WAIT); - return len; -} - static ssize_t quota_sync_store(struct gfs2_sbd *sdp, const char *buf, size_t len) { @@ -175,7 +163,6 @@ static struct gfs2_attr gfs2_attr_##name = __ATTR(name, mode, show, store) GFS2_ATTR(id, 0444, id_show, NULL); GFS2_ATTR(fsname, 0444, fsname_show, NULL); GFS2_ATTR(freeze, 0644, freeze_show, freeze_store); -GFS2_ATTR(shrink, 0200, NULL, shrink_store); GFS2_ATTR(withdraw, 0644, withdraw_show, withdraw_store); GFS2_ATTR(statfs_sync, 0200, NULL, statfs_sync_store); GFS2_ATTR(quota_sync, 0200, NULL, quota_sync_store); @@ -186,7 +173,6 @@ static struct attribute *gfs2_attrs[] = { &gfs2_attr_id.attr, &gfs2_attr_fsname.attr, &gfs2_attr_freeze.attr, - &gfs2_attr_shrink.attr, &gfs2_attr_withdraw.attr, &gfs2_attr_statfs_sync.attr, &gfs2_attr_quota_sync.attr, diff --git a/include/linux/lm_interface.h b/include/linux/lm_interface.h index f274997bc283..d0a7112b9719 100644 --- a/include/linux/lm_interface.h +++ b/include/linux/lm_interface.h @@ -138,9 +138,6 @@ typedef void (*lm_callback_t) (void *ptr, unsigned int type, void *data); * LM_CB_NEED_RECOVERY * The given journal needs to be recovered. * - * LM_CB_DROPLOCKS - * Reduce the number of cached locks. - * * LM_CB_ASYNC * The given lock has been granted. */ @@ -149,7 +146,6 @@ typedef void (*lm_callback_t) (void *ptr, unsigned int type, void *data); #define LM_CB_NEED_D 258 #define LM_CB_NEED_S 259 #define LM_CB_NEED_RECOVERY 260 -#define LM_CB_DROPLOCKS 261 #define LM_CB_ASYNC 262 /* -- cgit v1.2.3 From b2cad26cfc2091050574a460b304ed103a35dbda Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Tue, 3 Jun 2008 14:34:14 +0100 Subject: [GFS2] Remove obsolete conversion deadlock avoidance code This is only used by GFS1 so can be removed. Signed-off-by: Steven Whitehouse --- fs/gfs2/locking/dlm/lock.c | 23 +---------------------- include/linux/lm_interface.h | 2 -- 2 files changed, 1 insertion(+), 24 deletions(-) diff --git a/fs/gfs2/locking/dlm/lock.c b/fs/gfs2/locking/dlm/lock.c index 871ffc9578f2..894df4567a03 100644 --- a/fs/gfs2/locking/dlm/lock.c +++ b/fs/gfs2/locking/dlm/lock.c @@ -80,7 +80,6 @@ static void process_complete(struct gdlm_lock *lp) { struct gdlm_ls *ls = lp->ls; struct lm_async_cb acb; - s16 prev_mode = lp->cur; memset(&acb, 0, sizeof(acb)); @@ -160,15 +159,7 @@ static void process_complete(struct gdlm_lock *lp) lp->lksb.sb_status, lp->lockname.ln_type, (unsigned long long)lp->lockname.ln_number, lp->flags); - if (lp->lksb.sb_status == -EDEADLOCK && - lp->ls->fsflags & LM_MFLAG_CONV_NODROP) { - lp->req = lp->cur; - acb.lc_ret |= LM_OUT_CONV_DEADLK; - if (lp->cur == DLM_LOCK_IV) - lp->lksb.sb_lkid = 0; - goto out; - } else - return; + return; } /* @@ -268,10 +259,6 @@ out: acb.lc_name = lp->lockname; acb.lc_ret |= gdlm_make_lmstate(lp->cur); - if (!test_and_clear_bit(LFL_NOCACHE, &lp->flags) && - (lp->cur > DLM_LOCK_NL) && (prev_mode > DLM_LOCK_NL)) - acb.lc_ret |= LM_OUT_CACHEABLE; - ls->fscb(ls->sdp, LM_CB_ASYNC, &acb); } @@ -376,14 +363,6 @@ static inline unsigned int make_flags(struct gdlm_lock *lp, if (lp->lksb.sb_lkid != 0) { lkf |= DLM_LKF_CONVERT; - - /* Conversion deadlock avoidance by DLM */ - - if (!(lp->ls->fsflags & LM_MFLAG_CONV_NODROP) && - !test_bit(LFL_FORCE_PROMOTE, &lp->flags) && - !(lkf & DLM_LKF_NOQUEUE) && - cur > DLM_LOCK_NL && req > DLM_LOCK_NL && cur != req) - lkf |= DLM_LKF_CONVDEADLK; } if (lp->lvb) diff --git a/include/linux/lm_interface.h b/include/linux/lm_interface.h index d0a7112b9719..2ed8fa1b762b 100644 --- a/include/linux/lm_interface.h +++ b/include/linux/lm_interface.h @@ -122,11 +122,9 @@ typedef void (*lm_callback_t) (void *ptr, unsigned int type, void *data); */ #define LM_OUT_ST_MASK 0x00000003 -#define LM_OUT_CACHEABLE 0x00000004 #define LM_OUT_CANCELED 0x00000008 #define LM_OUT_ASYNC 0x00000080 #define LM_OUT_ERROR 0x00000100 -#define LM_OUT_CONV_DEADLK 0x00000200 /* * lm_callback_t types -- cgit v1.2.3 From 31fcba00fe7145527b159f8893ec6c9cc61309fd Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Wed, 4 Jun 2008 15:06:21 +0100 Subject: [GFS2] Remove all_list from lock_dlm I discovered that we had a list onto which every lock_dlm lock was being put. Its only function was to discover whether we'd got any locks left after umount. Since there was already a counter for that purpose as well, I removed the list. The saving is sizeof(struct list_head) per glock - well worth having. Signed-off-by: Steven Whitehouse --- fs/gfs2/locking/dlm/lock.c | 23 ----------------------- fs/gfs2/locking/dlm/lock_dlm.h | 2 -- fs/gfs2/locking/dlm/mount.c | 6 +----- 3 files changed, 1 insertion(+), 30 deletions(-) diff --git a/fs/gfs2/locking/dlm/lock.c b/fs/gfs2/locking/dlm/lock.c index 894df4567a03..2482c9047505 100644 --- a/fs/gfs2/locking/dlm/lock.c +++ b/fs/gfs2/locking/dlm/lock.c @@ -58,9 +58,6 @@ static void gdlm_delete_lp(struct gdlm_lock *lp) spin_lock(&ls->async_lock); if (!list_empty(&lp->delay_list)) list_del_init(&lp->delay_list); - gdlm_assert(!list_empty(&lp->all_list), "%x,%llx", lp->lockname.ln_type, - (unsigned long long)lp->lockname.ln_number); - list_del_init(&lp->all_list); ls->all_locks_count--; spin_unlock(&ls->async_lock); @@ -397,7 +394,6 @@ static int gdlm_create_lp(struct gdlm_ls *ls, struct lm_lockname *name, INIT_LIST_HEAD(&lp->delay_list); spin_lock(&ls->async_lock); - list_add(&lp->all_list, &ls->all_locks); ls->all_locks_count++; spin_unlock(&ls->async_lock); @@ -710,22 +706,3 @@ void gdlm_submit_delayed(struct gdlm_ls *ls) wake_up(&ls->thread_wait); } -int gdlm_release_all_locks(struct gdlm_ls *ls) -{ - struct gdlm_lock *lp, *safe; - int count = 0; - - spin_lock(&ls->async_lock); - list_for_each_entry_safe(lp, safe, &ls->all_locks, all_list) { - list_del_init(&lp->all_list); - - if (lp->lvb && lp->lvb != junk_lvb) - kfree(lp->lvb); - kfree(lp); - count++; - } - spin_unlock(&ls->async_lock); - - return count; -} - diff --git a/fs/gfs2/locking/dlm/lock_dlm.h b/fs/gfs2/locking/dlm/lock_dlm.h index 845a27fd303e..21cf46617d90 100644 --- a/fs/gfs2/locking/dlm/lock_dlm.h +++ b/fs/gfs2/locking/dlm/lock_dlm.h @@ -74,7 +74,6 @@ struct gdlm_ls { spinlock_t async_lock; struct list_head delayed; struct list_head submit; - struct list_head all_locks; u32 all_locks_count; wait_queue_head_t wait_control; struct task_struct *thread; @@ -112,7 +111,6 @@ struct gdlm_lock { unsigned long flags; /* lock_dlm flags LFL_ */ struct list_head delay_list; /* delayed */ - struct list_head all_list; /* all locks for the fs */ struct gdlm_lock *hold_null; /* NL lock for hold_lvb */ }; diff --git a/fs/gfs2/locking/dlm/mount.c b/fs/gfs2/locking/dlm/mount.c index fa31c54c2e67..947e70673eec 100644 --- a/fs/gfs2/locking/dlm/mount.c +++ b/fs/gfs2/locking/dlm/mount.c @@ -28,7 +28,6 @@ static struct gdlm_ls *init_gdlm(lm_callback_t cb, struct gfs2_sbd *sdp, spin_lock_init(&ls->async_lock); INIT_LIST_HEAD(&ls->delayed); INIT_LIST_HEAD(&ls->submit); - INIT_LIST_HEAD(&ls->all_locks); init_waitqueue_head(&ls->thread_wait); init_waitqueue_head(&ls->wait_control); ls->jid = -1; @@ -173,7 +172,6 @@ out: static void gdlm_unmount(void *lockspace) { struct gdlm_ls *ls = lockspace; - int rv; log_debug("unmount flags %lx", ls->flags); @@ -187,9 +185,7 @@ static void gdlm_unmount(void *lockspace) gdlm_kobject_release(ls); dlm_release_lockspace(ls->dlm_lockspace, 2); gdlm_release_threads(ls); - rv = gdlm_release_all_locks(ls); - if (rv) - log_info("gdlm_unmount: %d stray locks freed", rv); + BUG_ON(ls->all_locks_count); out: kfree(ls); } -- cgit v1.2.3 From 9f1585cb03866452e0df61a83c88302181e50054 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 26 Jun 2008 08:25:57 +0100 Subject: [GFS2] Glock documentation This patch adds a file describing the internals of GFS2's glock abstraction. Signed-off-by: Steven Whitehouse --- Documentation/filesystems/gfs2-glocks.txt | 114 ++++++++++++++++++++++++++++++ 1 file changed, 114 insertions(+) create mode 100644 Documentation/filesystems/gfs2-glocks.txt diff --git a/Documentation/filesystems/gfs2-glocks.txt b/Documentation/filesystems/gfs2-glocks.txt new file mode 100644 index 000000000000..4dae9a3840bf --- /dev/null +++ b/Documentation/filesystems/gfs2-glocks.txt @@ -0,0 +1,114 @@ + Glock internal locking rules + ------------------------------ + +This documents the basic principles of the glock state machine +internals. Each glock (struct gfs2_glock in fs/gfs2/incore.h) +has two main (internal) locks: + + 1. A spinlock (gl_spin) which protects the internal state such + as gl_state, gl_target and the list of holders (gl_holders) + 2. A non-blocking bit lock, GLF_LOCK, which is used to prevent other + threads from making calls to the DLM, etc. at the same time. If a + thread takes this lock, it must then call run_queue (usually via the + workqueue) when it releases it in order to ensure any pending tasks + are completed. + +The gl_holders list contains all the queued lock requests (not +just the holders) associated with the glock. If there are any +held locks, then they will be contiguous entries at the head +of the list. Locks are granted in strictly the order that they +are queued, except for those marked LM_FLAG_PRIORITY which are +used only during recovery, and even then only for journal locks. + +There are three lock states that users of the glock layer can request, +namely shared (SH), deferred (DF) and exclusive (EX). Those translate +to the following DLM lock modes: + +Glock mode | DLM lock mode +------------------------------ + UN | IV/NL Unlocked (no DLM lock associated with glock) or NL + SH | PR (Protected read) + DF | CW (Concurrent write) + EX | EX (Exclusive) + +Thus DF is basically a shared mode which is incompatible with the "normal" +shared lock mode, SH. In GFS2 the DF mode is used exclusively for direct I/O +operations. The glocks are basically a lock plus some routines which deal +with cache management. The following rules apply for the cache: + +Glock mode | Cache data | Cache Metadata | Dirty Data | Dirty Metadata +-------------------------------------------------------------------------- + UN | No | No | No | No + SH | Yes | Yes | No | No + DF | No | Yes | No | No + EX | Yes | Yes | Yes | Yes + +These rules are implemented using the various glock operations which +are defined for each type of glock. Not all types of glocks use +all the modes. Only inode glocks use the DF mode for example. + +Table of glock operations and per type constants: + +Field | Purpose +---------------------------------------------------------------------------- +go_xmote_th | Called before remote state change (e.g. to sync dirty data) +go_xmote_bh | Called after remote state change (e.g. to refill cache) +go_inval | Called if remote state change requires invalidating the cache +go_demote_ok | Returns boolean value of whether its ok to demote a glock + | (e.g. checks timeout, and that there is no cached data) +go_lock | Called for the first local holder of a lock +go_unlock | Called on the final local unlock of a lock +go_dump | Called to print content of object for debugfs file, or on + | error to dump glock to the log. +go_type; | The type of the glock, LM_TYPE_..... +go_min_hold_time | The minimum hold time + +The minimum hold time for each lock is the time after a remote lock +grant for which we ignore remote demote requests. This is in order to +prevent a situation where locks are being bounced around the cluster +from node to node with none of the nodes making any progress. This +tends to show up most with shared mmaped files which are being written +to by multiple nodes. By delaying the demotion in response to a +remote callback, that gives the userspace program time to make +some progress before the pages are unmapped. + +There is a plan to try and remove the go_lock and go_unlock callbacks +if possible, in order to try and speed up the fast path though the locking. +Also, eventually we hope to make the glock "EX" mode locally shared +such that any local locking will be done with the i_mutex as required +rather than via the glock. + +Locking rules for glock operations: + +Operation | GLF_LOCK bit lock held | gl_spin spinlock held +----------------------------------------------------------------- +go_xmote_th | Yes | No +go_xmote_bh | Yes | No +go_inval | Yes | No +go_demote_ok | Sometimes | Yes +go_lock | Yes | No +go_unlock | Yes | No +go_dump | Sometimes | Yes + +N.B. Operations must not drop either the bit lock or the spinlock +if its held on entry. go_dump and do_demote_ok must never block. +Note that go_dump will only be called if the glock's state +indicates that it is caching uptodate data. + +Glock locking order within GFS2: + + 1. i_mutex (if required) + 2. Rename glock (for rename only) + 3. Inode glock(s) + (Parents before children, inodes at "same level" with same parent in + lock number order) + 4. Rgrp glock(s) (for (de)allocation operations) + 5. Transaction glock (via gfs2_trans_begin) for non-read operations + 6. Page lock (always last, very important!) + +There are two glocks per inode. One deals with access to the inode +itself (locking order as above), and the other, known as the iopen +glock is used in conjunction with the i_nlink field in the inode to +determine the lifetime of the inode in question. Locking of inodes +is on a per-inode basis. Locking of rgrps is on a per rgrp basis. + -- cgit v1.2.3 From f17172e00167238cc5e4f61ac4e78c68e5c558ec Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Fri, 27 Jun 2008 09:40:57 +0100 Subject: [GFS2] Fix module building Two lines missed from the previous patch. Signed-off-by: Steven Whitehouse --- fs/gfs2/locking/dlm/lock_dlm.h | 1 - fs/gfs2/locking/dlm/mount.c | 1 - 2 files changed, 2 deletions(-) diff --git a/fs/gfs2/locking/dlm/lock_dlm.h b/fs/gfs2/locking/dlm/lock_dlm.h index 21cf46617d90..3c98e7c6f93b 100644 --- a/fs/gfs2/locking/dlm/lock_dlm.h +++ b/fs/gfs2/locking/dlm/lock_dlm.h @@ -148,7 +148,6 @@ void gdlm_release_threads(struct gdlm_ls *); /* lock.c */ void gdlm_submit_delayed(struct gdlm_ls *); -int gdlm_release_all_locks(struct gdlm_ls *); unsigned int gdlm_do_lock(struct gdlm_lock *); int gdlm_get_lock(void *, struct lm_lockname *, void **); diff --git a/fs/gfs2/locking/dlm/mount.c b/fs/gfs2/locking/dlm/mount.c index 947e70673eec..09d78c216f48 100644 --- a/fs/gfs2/locking/dlm/mount.c +++ b/fs/gfs2/locking/dlm/mount.c @@ -221,7 +221,6 @@ static void gdlm_withdraw(void *lockspace) dlm_release_lockspace(ls->dlm_lockspace, 2); gdlm_release_threads(ls); - gdlm_release_all_locks(ls); gdlm_kobject_release(ls); } -- cgit v1.2.3 From 24d2ba0a8a5816eb8322836271fbcb045d915dfd Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 27 Jun 2008 10:37:03 +0200 Subject: x86, AMD IOMMU: build fix fix: arch/x86/kernel/amd_iommu_init.c:247: warning: 'struct acpi_table_header' declared inside parameter list arch/x86/kernel/amd_iommu_init.c:247: warning: its scope is only this definition or declaration, which is probably not what you want arch/x86/kernel/amd_iommu_init.c: In function 'find_last_devid_acpi': arch/x86/kernel/amd_iommu_init.c:257: error: dereferencing pointer to incomplete type arch/x86/kernel/amd_iommu_init.c:265: error: dereferencing pointer to incomplete type the AMD IOMMU code depends on ACPI facilities. Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5a82f18ab5ed..62a2820297b1 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -552,7 +552,7 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT config AMD_IOMMU bool "AMD IOMMU support" select SWIOTL - depends on X86_64 && PCI + depends on X86_64 && PCI && ACPI help Select this to get support for AMD IOMMU hardware in your system. -- cgit v1.2.3 From 92af4e29020ff096178a00605b3662b3b39d4aa9 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 27 Jun 2008 10:48:16 +0200 Subject: x86, AMD IOMMU, build fix #2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix: arch/x86/kernel/amd_iommu.c: In function ‘amd_iommu_init_dma_ops': arch/x86/kernel/amd_iommu.c:940: error: lvalue required as left operand of assignment arch/x86/kernel/amd_iommu.c:941: error: lvalue required as left operand of assignment due to !CONFIG_GART_IOMMU. Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu.c | 2 ++ arch/x86/kernel/amd_iommu_init.c | 2 ++ include/asm-x86/gart.h | 5 +++-- 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 134dea103247..a1b38561d347 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -937,8 +937,10 @@ int __init amd_iommu_init_dma_ops(void) iommu_detected = 1; force_iommu = 1; bad_dma_address = 0; +#ifdef CONFIG_GART_IOMMU gart_iommu_aperture_disabled = 1; gart_iommu_aperture = 0; +#endif dma_ops = &amd_iommu_dma_ops; diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index d1aa2344cd90..6ab8128db1cc 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -801,8 +801,10 @@ void __init amd_iommu_detect(void) if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) { iommu_detected = 1; +#ifdef CONFIG_GART_IOMMU gart_iommu_aperture_disabled = 1; gart_iommu_aperture = 0; +#endif } } diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h index 90958ed993fa..ec5785c6e2fd 100644 --- a/include/asm-x86/gart.h +++ b/include/asm-x86/gart.h @@ -18,8 +18,9 @@ extern int gart_iommu_aperture_allowed; extern int gart_iommu_aperture_disabled; extern int fix_aperture; #else -#define gart_iommu_aperture 0 -#define gart_iommu_aperture_allowed 0 +#define gart_iommu_aperture 0 +#define gart_iommu_aperture_allowed 0 +#define gart_iommu_aperture_disabled 1 static inline void early_gart_iommu_check(void) { -- cgit v1.2.3 From 07c40e8a1acdb56fca485a6deeb252ebf19509a1 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 27 Jun 2008 11:31:28 +0200 Subject: x86, AMD IOMMU: build fix #3 fix typo causing: arch/x86/kernel/built-in.o: In function `__unmap_single': amd_iommu.c:(.text+0x17771): undefined reference to `iommu_area_free' arch/x86/kernel/built-in.o: In function `__map_single': amd_iommu.c:(.text+0x1797a): undefined reference to `iommu_area_alloc' amd_iommu.c:(.text+0x179a2): undefined reference to `iommu_area_alloc' Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 62a2820297b1..8aae462f4e01 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -551,7 +551,7 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT config AMD_IOMMU bool "AMD IOMMU support" - select SWIOTL + select SWIOTLB depends on X86_64 && PCI && ACPI help Select this to get support for AMD IOMMU hardware in your system. -- cgit v1.2.3 From 127a237a1ff49fa5b8e00af91e841598aeea3513 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 27 Jun 2008 11:48:22 +0200 Subject: fix "smp_call_function: get rid of the unused nonatomic/retry argument" fix: arch/x86/kernel/process.c: In function 'cpu_idle_wait': arch/x86/kernel/process.c:64: error: too many arguments to function 'smp_call_function' Signed-off-by: Ingo Molnar --- arch/x86/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index ba370dc8685b..2dad8fef391c 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -61,7 +61,7 @@ void cpu_idle_wait(void) { smp_mb(); /* kick all the CPUs so that they exit out of pm_idle */ - smp_call_function(do_nothing, NULL, 0, 1); + smp_call_function(do_nothing, NULL, 1); } EXPORT_SYMBOL_GPL(cpu_idle_wait); -- cgit v1.2.3 From ce0d1b6f73870878aae622b72e85fe8f7a16b51c Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 27 Jun 2008 11:50:32 +0200 Subject: fix: "smp_call_function: get rid of the unused nonatomic/retry argument" fix: kernel/smp.c: In function 'smp_call_function_mask': kernel/smp.c:303: error: too many arguments to function 'smp_call_function_single' Signed-off-by: Ingo Molnar --- kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/smp.c b/kernel/smp.c index 7e0432a4a0e2..4f582b257eba 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -300,7 +300,7 @@ int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info, return 0; else if (num_cpus == 1) { cpu = first_cpu(mask); - return smp_call_function_single(cpu, func, info, 0, wait); + return smp_call_function_single(cpu, func, info, wait); } if (!wait) { -- cgit v1.2.3 From 8b604d520799a995946437d041f46bae7d5bcc8c Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 27 Jun 2008 11:52:45 +0200 Subject: fix: "smp_call_function: get rid of the unused nonatomic/retry argument" drivers/char/sysrq.c: In function 'sysrq_showregs_othercpus': drivers/char/sysrq.c:218: error: too many arguments to function 'smp_call_function' Signed-off-by: Ingo Molnar --- drivers/char/sysrq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index dbce1263bdff..8fdfe9c871e3 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -215,7 +215,7 @@ static void showacpu(void *dummy) static void sysrq_showregs_othercpus(struct work_struct *dummy) { - smp_call_function(showacpu, NULL, 0, 0); + smp_call_function(showacpu, NULL, 0); } static DECLARE_WORK(sysrq_showallcpus, sysrq_showregs_othercpus); -- cgit v1.2.3 From bf647b62fdb948e757a7b4d18d4f16e3c763b1d1 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:10 +0200 Subject: sched: clean up some unused variables In file included from /mnt/build/linux-2.6/kernel/sched.c:1496: /mnt/build/linux-2.6/kernel/sched_rt.c: In function '__enable_runtime': /mnt/build/linux-2.6/kernel/sched_rt.c:339: warning: unused variable 'rd' /mnt/build/linux-2.6/kernel/sched_rt.c: In function 'requeue_rt_entity': /mnt/build/linux-2.6/kernel/sched_rt.c:692: warning: unused variable 'queue' Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_rt.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index bd90c8bb0739..6b4a6b5a4167 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -336,7 +336,6 @@ static void disable_runtime(struct rq *rq) static void __enable_runtime(struct rq *rq) { - struct root_domain *rd = rq->rd; struct rt_rq *rt_rq; if (unlikely(!scheduler_running)) @@ -689,7 +688,6 @@ static void requeue_rt_entity(struct rt_rq *rt_rq, struct sched_rt_entity *rt_se) { struct rt_prio_array *array = &rt_rq->active; - struct list_head *queue = array->queue + rt_se_prio(rt_se); if (on_rt_rq(rt_se)) { list_del_init(&rt_se->run_list); -- cgit v1.2.3 From a7be37ac8e1565e00880531f4e2aff421a21c803 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:11 +0200 Subject: sched: revert the revert of: weight calculations Try again.. initial commit: 8f1bc385cfbab474db6c27b5af1e439614f3025c revert: f9305d4a0968201b2818dbed0dc8cb0d4ee7aeb3 Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 9 ++--- kernel/sched_fair.c | 105 +++++++++++++++++++++++++++++++++--------------- kernel/sched_features.h | 1 + 3 files changed, 76 insertions(+), 39 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index c51d9fae8cd8..f653af684fb3 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1342,6 +1342,9 @@ static void __resched_task(struct task_struct *p, int tif_bit) */ #define SRR(x, y) (((x) + (1UL << ((y) - 1))) >> (y)) +/* + * delta *= weight / lw + */ static unsigned long calc_delta_mine(unsigned long delta_exec, unsigned long weight, struct load_weight *lw) @@ -1369,12 +1372,6 @@ calc_delta_mine(unsigned long delta_exec, unsigned long weight, return (unsigned long)min(tmp, (u64)(unsigned long)LONG_MAX); } -static inline unsigned long -calc_delta_fair(unsigned long delta_exec, struct load_weight *lw) -{ - return calc_delta_mine(delta_exec, NICE_0_LOAD, lw); -} - static inline void update_load_add(struct load_weight *lw, unsigned long inc) { lw->weight += inc; diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 1fe4c65a8170..496500988ce5 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -333,6 +333,34 @@ int sched_nr_latency_handler(struct ctl_table *table, int write, } #endif +/* + * delta *= w / rw + */ +static inline unsigned long +calc_delta_weight(unsigned long delta, struct sched_entity *se) +{ + for_each_sched_entity(se) { + delta = calc_delta_mine(delta, + se->load.weight, &cfs_rq_of(se)->load); + } + + return delta; +} + +/* + * delta *= rw / w + */ +static inline unsigned long +calc_delta_fair(unsigned long delta, struct sched_entity *se) +{ + for_each_sched_entity(se) { + delta = calc_delta_mine(delta, + cfs_rq_of(se)->load.weight, &se->load); + } + + return delta; +} + /* * The idea is to set a period in which each task runs once. * @@ -362,47 +390,54 @@ static u64 __sched_period(unsigned long nr_running) */ static u64 sched_slice(struct cfs_rq *cfs_rq, struct sched_entity *se) { - u64 slice = __sched_period(cfs_rq->nr_running); - - for_each_sched_entity(se) { - cfs_rq = cfs_rq_of(se); - - slice *= se->load.weight; - do_div(slice, cfs_rq->load.weight); - } - - - return slice; + return calc_delta_weight(__sched_period(cfs_rq->nr_running), se); } /* * We calculate the vruntime slice of a to be inserted task * - * vs = s/w = p/rw + * vs = s*rw/w = p */ static u64 sched_vslice_add(struct cfs_rq *cfs_rq, struct sched_entity *se) { unsigned long nr_running = cfs_rq->nr_running; - unsigned long weight; - u64 vslice; if (!se->on_rq) nr_running++; - vslice = __sched_period(nr_running); + return __sched_period(nr_running); +} + +/* + * The goal of calc_delta_asym() is to be asymmetrically around NICE_0_LOAD, in + * that it favours >=0 over <0. + * + * -20 | + * | + * 0 --------+------- + * .' + * 19 .' + * + */ +static unsigned long +calc_delta_asym(unsigned long delta, struct sched_entity *se) +{ + struct load_weight lw = { + .weight = NICE_0_LOAD, + .inv_weight = 1UL << (WMULT_SHIFT-NICE_0_SHIFT) + }; for_each_sched_entity(se) { - cfs_rq = cfs_rq_of(se); + struct load_weight *se_lw = &se->load; - weight = cfs_rq->load.weight; - if (!se->on_rq) - weight += se->load.weight; + if (se->load.weight < NICE_0_LOAD) + se_lw = &lw; - vslice *= NICE_0_LOAD; - do_div(vslice, weight); + delta = calc_delta_mine(delta, + cfs_rq_of(se)->load.weight, se_lw); } - return vslice; + return delta; } /* @@ -419,11 +454,7 @@ __update_curr(struct cfs_rq *cfs_rq, struct sched_entity *curr, curr->sum_exec_runtime += delta_exec; schedstat_add(cfs_rq, exec_clock, delta_exec); - delta_exec_weighted = delta_exec; - if (unlikely(curr->load.weight != NICE_0_LOAD)) { - delta_exec_weighted = calc_delta_fair(delta_exec_weighted, - &curr->load); - } + delta_exec_weighted = calc_delta_fair(delta_exec, curr); curr->vruntime += delta_exec_weighted; } @@ -609,8 +640,17 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial) if (!initial) { /* sleeps upto a single latency don't count. */ - if (sched_feat(NEW_FAIR_SLEEPERS)) - vruntime -= sysctl_sched_latency; + if (sched_feat(NEW_FAIR_SLEEPERS)) { + unsigned long thresh = sysctl_sched_latency; + + /* + * convert the sleeper threshold into virtual time + */ + if (sched_feat(NORMALIZED_SLEEPER)) + thresh = calc_delta_fair(thresh, se); + + vruntime -= thresh; + } /* ensure we never gain time by being placed backwards. */ vruntime = max_vruntime(se->vruntime, vruntime); @@ -1111,11 +1151,10 @@ static unsigned long wakeup_gran(struct sched_entity *se) unsigned long gran = sysctl_sched_wakeup_granularity; /* - * More easily preempt - nice tasks, while not making - * it harder for + nice tasks. + * More easily preempt - nice tasks, while not making it harder for + * + nice tasks. */ - if (unlikely(se->load.weight > NICE_0_LOAD)) - gran = calc_delta_fair(gran, &se->load); + gran = calc_delta_asym(sysctl_sched_wakeup_granularity, se); return gran; } diff --git a/kernel/sched_features.h b/kernel/sched_features.h index 62b39ca92ebd..afa549166d8d 100644 --- a/kernel/sched_features.h +++ b/kernel/sched_features.h @@ -1,4 +1,5 @@ SCHED_FEAT(NEW_FAIR_SLEEPERS, 1) +SCHED_FEAT(NORMALIZED_SLEEPER, 1) SCHED_FEAT(WAKEUP_PREEMPT, 1) SCHED_FEAT(START_DEBIT, 1) SCHED_FEAT(AFFINE_WAKEUPS, 1) -- cgit v1.2.3 From c9c294a630e28eec5f2865f028ecfc58d45c0a5a Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:12 +0200 Subject: sched: fix calc_delta_asym() calc_delta_asym() is supposed to do the same as calc_delta_fair() except linearly shrink the result for negative nice processes - this causes them to have a smaller preemption threshold so that they are more easily preempted. The problem is that for task groups se->load.weight is the per cpu share of the actual task group weight; take that into account. Also provide a debug switch to disable the asymmetry (which I still don't like - but it does greatly benefit some workloads) This would explain the interactivity issues reported against group scheduling. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 28 +++++++++++++++++++++++++++- kernel/sched_features.h | 1 + 2 files changed, 28 insertions(+), 1 deletion(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 496500988ce5..2268e634812b 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -430,6 +430,29 @@ calc_delta_asym(unsigned long delta, struct sched_entity *se) for_each_sched_entity(se) { struct load_weight *se_lw = &se->load; +#ifdef CONFIG_FAIR_SCHED_GROUP + struct cfs_rq *cfs_rq = se->my_q; + struct task_group *tg = NULL + + if (cfs_rq) + tg = cfs_rq->tg; + + if (tg && tg->shares < NICE_0_LOAD) { + /* + * scale shares to what it would have been had + * tg->weight been NICE_0_LOAD: + * + * weight = 1024 * shares / tg->weight + */ + lw.weight *= se->load.weight; + lw.weight /= tg->shares; + + lw.inv_weight = 0; + + se_lw = &lw; + } else +#endif + if (se->load.weight < NICE_0_LOAD) se_lw = &lw; @@ -1154,7 +1177,10 @@ static unsigned long wakeup_gran(struct sched_entity *se) * More easily preempt - nice tasks, while not making it harder for * + nice tasks. */ - gran = calc_delta_asym(sysctl_sched_wakeup_granularity, se); + if (sched_feat(ASYM_GRAN)) + gran = calc_delta_asym(sysctl_sched_wakeup_granularity, se); + else + gran = calc_delta_fair(sysctl_sched_wakeup_granularity, se); return gran; } diff --git a/kernel/sched_features.h b/kernel/sched_features.h index afa549166d8d..04123af2e678 100644 --- a/kernel/sched_features.h +++ b/kernel/sched_features.h @@ -7,3 +7,4 @@ SCHED_FEAT(CACHE_HOT_BUDDY, 1) SCHED_FEAT(SYNC_WAKEUPS, 1) SCHED_FEAT(HRTICK, 1) SCHED_FEAT(DOUBLE_TICK, 0) +SCHED_FEAT(ASYM_GRAN, 1) -- cgit v1.2.3 From ced8aa16e1db55c33c507174c1b1f9e107445865 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:13 +0200 Subject: sched: fix calc_delta_asym, #2 Ok, so why are we in this mess, it was: 1/w but now we mixed that rw in the mix like: rw/w rw being \Sum w suggests: fiddling w, we should also fiddle rw, humm? Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 2268e634812b..2e197b8e43f1 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -429,6 +429,7 @@ calc_delta_asym(unsigned long delta, struct sched_entity *se) for_each_sched_entity(se) { struct load_weight *se_lw = &se->load; + unsigned long rw = cfs_rq_of(se)->load.weight; #ifdef CONFIG_FAIR_SCHED_GROUP struct cfs_rq *cfs_rq = se->my_q; @@ -450,14 +451,16 @@ calc_delta_asym(unsigned long delta, struct sched_entity *se) lw.inv_weight = 0; se_lw = &lw; + rw += lw.weight - se->load.weight; } else #endif - if (se->load.weight < NICE_0_LOAD) + if (se->load.weight < NICE_0_LOAD) { se_lw = &lw; + rw += NICE_0_LOAD - se->load.weight; + } - delta = calc_delta_mine(delta, - cfs_rq_of(se)->load.weight, se_lw); + delta = calc_delta_mine(delta, rw, se_lw); } return delta; -- cgit v1.2.3 From c09595f63bb1909c5dc4dca288f4fe818561b5f3 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:14 +0200 Subject: sched: revert revert of: fair-group: SMP-nice for group scheduling Try again.. Initial commit: 18d95a2832c1392a2d63227a7a6d433cb9f2037e Revert: 6363ca57c76b7b83639ca8c83fc285fa26a7880e Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- include/linux/sched.h | 1 + kernel/sched.c | 430 ++++++++++++++++++++++++++++++++++++++++++++++---- kernel/sched_debug.c | 5 + kernel/sched_fair.c | 124 +++++++++------ kernel/sched_rt.c | 4 + 5 files changed, 489 insertions(+), 75 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index eaf821072dbd..97a58b622ee1 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -765,6 +765,7 @@ struct sched_domain { struct sched_domain *child; /* bottom domain must be null terminated */ struct sched_group *groups; /* the balancing groups of the domain */ cpumask_t span; /* span of all CPUs in this domain */ + int first_cpu; /* cache of the first cpu in this domain */ unsigned long min_interval; /* Minimum balance interval ms */ unsigned long max_interval; /* Maximum balance interval ms */ unsigned int busy_factor; /* less balancing by factor if busy */ diff --git a/kernel/sched.c b/kernel/sched.c index f653af684fb3..874b6da15430 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -403,6 +403,43 @@ struct cfs_rq { */ struct list_head leaf_cfs_rq_list; struct task_group *tg; /* group that "owns" this runqueue */ + +#ifdef CONFIG_SMP + unsigned long task_weight; + unsigned long shares; + /* + * We need space to build a sched_domain wide view of the full task + * group tree, in order to avoid depending on dynamic memory allocation + * during the load balancing we place this in the per cpu task group + * hierarchy. This limits the load balancing to one instance per cpu, + * but more should not be needed anyway. + */ + struct aggregate_struct { + /* + * load = weight(cpus) * f(tg) + * + * Where f(tg) is the recursive weight fraction assigned to + * this group. + */ + unsigned long load; + + /* + * part of the group weight distributed to this span. + */ + unsigned long shares; + + /* + * The sum of all runqueue weights within this span. + */ + unsigned long rq_weight; + + /* + * Weight contributed by tasks; this is the part we can + * influence by moving tasks around. + */ + unsigned long task_weight; + } aggregate; +#endif #endif }; @@ -1484,6 +1521,326 @@ static unsigned long source_load(int cpu, int type); static unsigned long target_load(int cpu, int type); static unsigned long cpu_avg_load_per_task(int cpu); static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd); + +#ifdef CONFIG_FAIR_GROUP_SCHED + +/* + * Group load balancing. + * + * We calculate a few balance domain wide aggregate numbers; load and weight. + * Given the pictures below, and assuming each item has equal weight: + * + * root 1 - thread + * / | \ A - group + * A 1 B + * /|\ / \ + * C 2 D 3 4 + * | | + * 5 6 + * + * load: + * A and B get 1/3-rd of the total load. C and D get 1/3-rd of A's 1/3-rd, + * which equals 1/9-th of the total load. + * + * shares: + * The weight of this group on the selected cpus. + * + * rq_weight: + * Direct sum of all the cpu's their rq weight, e.g. A would get 3 while + * B would get 2. + * + * task_weight: + * Part of the rq_weight contributed by tasks; all groups except B would + * get 1, B gets 2. + */ + +static inline struct aggregate_struct * +aggregate(struct task_group *tg, struct sched_domain *sd) +{ + return &tg->cfs_rq[sd->first_cpu]->aggregate; +} + +typedef void (*aggregate_func)(struct task_group *, struct sched_domain *); + +/* + * Iterate the full tree, calling @down when first entering a node and @up when + * leaving it for the final time. + */ +static +void aggregate_walk_tree(aggregate_func down, aggregate_func up, + struct sched_domain *sd) +{ + struct task_group *parent, *child; + + rcu_read_lock(); + parent = &root_task_group; +down: + (*down)(parent, sd); + list_for_each_entry_rcu(child, &parent->children, siblings) { + parent = child; + goto down; + +up: + continue; + } + (*up)(parent, sd); + + child = parent; + parent = parent->parent; + if (parent) + goto up; + rcu_read_unlock(); +} + +/* + * Calculate the aggregate runqueue weight. + */ +static +void aggregate_group_weight(struct task_group *tg, struct sched_domain *sd) +{ + unsigned long rq_weight = 0; + unsigned long task_weight = 0; + int i; + + for_each_cpu_mask(i, sd->span) { + rq_weight += tg->cfs_rq[i]->load.weight; + task_weight += tg->cfs_rq[i]->task_weight; + } + + aggregate(tg, sd)->rq_weight = rq_weight; + aggregate(tg, sd)->task_weight = task_weight; +} + +/* + * Compute the weight of this group on the given cpus. + */ +static +void aggregate_group_shares(struct task_group *tg, struct sched_domain *sd) +{ + unsigned long shares = 0; + int i; + + for_each_cpu_mask(i, sd->span) + shares += tg->cfs_rq[i]->shares; + + if ((!shares && aggregate(tg, sd)->rq_weight) || shares > tg->shares) + shares = tg->shares; + + aggregate(tg, sd)->shares = shares; +} + +/* + * Compute the load fraction assigned to this group, relies on the aggregate + * weight and this group's parent's load, i.e. top-down. + */ +static +void aggregate_group_load(struct task_group *tg, struct sched_domain *sd) +{ + unsigned long load; + + if (!tg->parent) { + int i; + + load = 0; + for_each_cpu_mask(i, sd->span) + load += cpu_rq(i)->load.weight; + + } else { + load = aggregate(tg->parent, sd)->load; + + /* + * shares is our weight in the parent's rq so + * shares/parent->rq_weight gives our fraction of the load + */ + load *= aggregate(tg, sd)->shares; + load /= aggregate(tg->parent, sd)->rq_weight + 1; + } + + aggregate(tg, sd)->load = load; +} + +static void __set_se_shares(struct sched_entity *se, unsigned long shares); + +/* + * Calculate and set the cpu's group shares. + */ +static void +__update_group_shares_cpu(struct task_group *tg, struct sched_domain *sd, + int tcpu) +{ + int boost = 0; + unsigned long shares; + unsigned long rq_weight; + + if (!tg->se[tcpu]) + return; + + rq_weight = tg->cfs_rq[tcpu]->load.weight; + + /* + * If there are currently no tasks on the cpu pretend there is one of + * average load so that when a new task gets to run here it will not + * get delayed by group starvation. + */ + if (!rq_weight) { + boost = 1; + rq_weight = NICE_0_LOAD; + } + + /* + * \Sum shares * rq_weight + * shares = ----------------------- + * \Sum rq_weight + * + */ + shares = aggregate(tg, sd)->shares * rq_weight; + shares /= aggregate(tg, sd)->rq_weight + 1; + + /* + * record the actual number of shares, not the boosted amount. + */ + tg->cfs_rq[tcpu]->shares = boost ? 0 : shares; + + if (shares < MIN_SHARES) + shares = MIN_SHARES; + else if (shares > MAX_SHARES) + shares = MAX_SHARES; + + __set_se_shares(tg->se[tcpu], shares); +} + +/* + * Re-adjust the weights on the cpu the task came from and on the cpu the + * task went to. + */ +static void +__move_group_shares(struct task_group *tg, struct sched_domain *sd, + int scpu, int dcpu) +{ + unsigned long shares; + + shares = tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares; + + __update_group_shares_cpu(tg, sd, scpu); + __update_group_shares_cpu(tg, sd, dcpu); + + /* + * ensure we never loose shares due to rounding errors in the + * above redistribution. + */ + shares -= tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares; + if (shares) + tg->cfs_rq[dcpu]->shares += shares; +} + +/* + * Because changing a group's shares changes the weight of the super-group + * we need to walk up the tree and change all shares until we hit the root. + */ +static void +move_group_shares(struct task_group *tg, struct sched_domain *sd, + int scpu, int dcpu) +{ + while (tg) { + __move_group_shares(tg, sd, scpu, dcpu); + tg = tg->parent; + } +} + +static +void aggregate_group_set_shares(struct task_group *tg, struct sched_domain *sd) +{ + unsigned long shares = aggregate(tg, sd)->shares; + int i; + + for_each_cpu_mask(i, sd->span) { + struct rq *rq = cpu_rq(i); + unsigned long flags; + + spin_lock_irqsave(&rq->lock, flags); + __update_group_shares_cpu(tg, sd, i); + spin_unlock_irqrestore(&rq->lock, flags); + } + + aggregate_group_shares(tg, sd); + + /* + * ensure we never loose shares due to rounding errors in the + * above redistribution. + */ + shares -= aggregate(tg, sd)->shares; + if (shares) { + tg->cfs_rq[sd->first_cpu]->shares += shares; + aggregate(tg, sd)->shares += shares; + } +} + +/* + * Calculate the accumulative weight and recursive load of each task group + * while walking down the tree. + */ +static +void aggregate_get_down(struct task_group *tg, struct sched_domain *sd) +{ + aggregate_group_weight(tg, sd); + aggregate_group_shares(tg, sd); + aggregate_group_load(tg, sd); +} + +/* + * Rebalance the cpu shares while walking back up the tree. + */ +static +void aggregate_get_up(struct task_group *tg, struct sched_domain *sd) +{ + aggregate_group_set_shares(tg, sd); +} + +static DEFINE_PER_CPU(spinlock_t, aggregate_lock); + +static void __init init_aggregate(void) +{ + int i; + + for_each_possible_cpu(i) + spin_lock_init(&per_cpu(aggregate_lock, i)); +} + +static int get_aggregate(struct sched_domain *sd) +{ + if (!spin_trylock(&per_cpu(aggregate_lock, sd->first_cpu))) + return 0; + + aggregate_walk_tree(aggregate_get_down, aggregate_get_up, sd); + return 1; +} + +static void put_aggregate(struct sched_domain *sd) +{ + spin_unlock(&per_cpu(aggregate_lock, sd->first_cpu)); +} + +static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares) +{ + cfs_rq->shares = shares; +} + +#else + +static inline void init_aggregate(void) +{ +} + +static inline int get_aggregate(struct sched_domain *sd) +{ + return 0; +} + +static inline void put_aggregate(struct sched_domain *sd) +{ +} +#endif + #endif #include "sched_stats.h" @@ -1498,26 +1855,14 @@ static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd); #define for_each_class(class) \ for (class = sched_class_highest; class; class = class->next) -static inline void inc_load(struct rq *rq, const struct task_struct *p) -{ - update_load_add(&rq->load, p->se.load.weight); -} - -static inline void dec_load(struct rq *rq, const struct task_struct *p) -{ - update_load_sub(&rq->load, p->se.load.weight); -} - -static void inc_nr_running(struct task_struct *p, struct rq *rq) +static void inc_nr_running(struct rq *rq) { rq->nr_running++; - inc_load(rq, p); } -static void dec_nr_running(struct task_struct *p, struct rq *rq) +static void dec_nr_running(struct rq *rq) { rq->nr_running--; - dec_load(rq, p); } static void set_load_weight(struct task_struct *p) @@ -1609,7 +1954,7 @@ static void activate_task(struct rq *rq, struct task_struct *p, int wakeup) rq->nr_uninterruptible--; enqueue_task(rq, p, wakeup); - inc_nr_running(p, rq); + inc_nr_running(rq); } /* @@ -1621,7 +1966,7 @@ static void deactivate_task(struct rq *rq, struct task_struct *p, int sleep) rq->nr_uninterruptible++; dequeue_task(rq, p, sleep); - dec_nr_running(p, rq); + dec_nr_running(rq); } /** @@ -2274,7 +2619,7 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags) * management (if any): */ p->sched_class->task_new(rq, p); - inc_nr_running(p, rq); + inc_nr_running(rq); } check_preempt_curr(rq, p); #ifdef CONFIG_SMP @@ -3265,9 +3610,12 @@ static int load_balance(int this_cpu, struct rq *this_rq, unsigned long imbalance; struct rq *busiest; unsigned long flags; + int unlock_aggregate; cpus_setall(*cpus); + unlock_aggregate = get_aggregate(sd); + /* * When power savings policy is enabled for the parent domain, idle * sibling can pick up load irrespective of busy siblings. In this case, @@ -3383,8 +3731,9 @@ redo: if (!ld_moved && !sd_idle && sd->flags & SD_SHARE_CPUPOWER && !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE)) - return -1; - return ld_moved; + ld_moved = -1; + + goto out; out_balanced: schedstat_inc(sd, lb_balanced[idle]); @@ -3399,8 +3748,13 @@ out_one_pinned: if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER && !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE)) - return -1; - return 0; + ld_moved = -1; + else + ld_moved = 0; +out: + if (unlock_aggregate) + put_aggregate(sd); + return ld_moved; } /* @@ -4588,10 +4942,8 @@ void set_user_nice(struct task_struct *p, long nice) goto out_unlock; } on_rq = p->se.on_rq; - if (on_rq) { + if (on_rq) dequeue_task(rq, p, 0); - dec_load(rq, p); - } p->static_prio = NICE_TO_PRIO(nice); set_load_weight(p); @@ -4601,7 +4953,6 @@ void set_user_nice(struct task_struct *p, long nice) if (on_rq) { enqueue_task(rq, p, 0); - inc_load(rq, p); /* * If the task increased its priority or is running and * lowered its priority, then reschedule its CPU: @@ -7016,6 +7367,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, ALLNODES); set_domain_attribute(sd, attr); sd->span = *cpu_map; + sd->first_cpu = first_cpu(sd->span); cpu_to_allnodes_group(i, cpu_map, &sd->groups, tmpmask); p = sd; sd_allnodes = 1; @@ -7026,6 +7378,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, NODE); set_domain_attribute(sd, attr); sched_domain_node_span(cpu_to_node(i), &sd->span); + sd->first_cpu = first_cpu(sd->span); sd->parent = p; if (p) p->child = sd; @@ -7037,6 +7390,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, CPU); set_domain_attribute(sd, attr); sd->span = *nodemask; + sd->first_cpu = first_cpu(sd->span); sd->parent = p; if (p) p->child = sd; @@ -7048,6 +7402,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, MC); set_domain_attribute(sd, attr); sd->span = cpu_coregroup_map(i); + sd->first_cpu = first_cpu(sd->span); cpus_and(sd->span, sd->span, *cpu_map); sd->parent = p; p->child = sd; @@ -7060,6 +7415,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, SIBLING); set_domain_attribute(sd, attr); sd->span = per_cpu(cpu_sibling_map, i); + sd->first_cpu = first_cpu(sd->span); cpus_and(sd->span, sd->span, *cpu_map); sd->parent = p; p->child = sd; @@ -7757,6 +8113,7 @@ void __init sched_init(void) } #ifdef CONFIG_SMP + init_aggregate(); init_defrootdomain(); #endif @@ -8322,14 +8679,11 @@ void sched_move_task(struct task_struct *tsk) #endif /* CONFIG_GROUP_SCHED */ #ifdef CONFIG_FAIR_GROUP_SCHED -static void set_se_shares(struct sched_entity *se, unsigned long shares) +static void __set_se_shares(struct sched_entity *se, unsigned long shares) { struct cfs_rq *cfs_rq = se->cfs_rq; - struct rq *rq = cfs_rq->rq; int on_rq; - spin_lock_irq(&rq->lock); - on_rq = se->on_rq; if (on_rq) dequeue_entity(cfs_rq, se, 0); @@ -8339,8 +8693,17 @@ static void set_se_shares(struct sched_entity *se, unsigned long shares) if (on_rq) enqueue_entity(cfs_rq, se, 0); +} - spin_unlock_irq(&rq->lock); +static void set_se_shares(struct sched_entity *se, unsigned long shares) +{ + struct cfs_rq *cfs_rq = se->cfs_rq; + struct rq *rq = cfs_rq->rq; + unsigned long flags; + + spin_lock_irqsave(&rq->lock, flags); + __set_se_shares(se, shares); + spin_unlock_irqrestore(&rq->lock, flags); } static DEFINE_MUTEX(shares_mutex); @@ -8379,8 +8742,13 @@ int sched_group_set_shares(struct task_group *tg, unsigned long shares) * w/o tripping rebalance_share or load_balance_fair. */ tg->shares = shares; - for_each_possible_cpu(i) + for_each_possible_cpu(i) { + /* + * force a rebalance + */ + cfs_rq_set_shares(tg->cfs_rq[i], 0); set_se_shares(tg->se[i], shares); + } /* * Enable load balance activity on this group, by inserting it back on diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index 8e077b9c91cb..04394ccac88d 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -167,6 +167,11 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) #endif SEQ_printf(m, " .%-30s: %ld\n", "nr_spread_over", cfs_rq->nr_spread_over); +#ifdef CONFIG_FAIR_GROUP_SCHED +#ifdef CONFIG_SMP + SEQ_printf(m, " .%-30s: %lu\n", "shares", cfs_rq->shares); +#endif +#endif } void print_rt_rq(struct seq_file *m, int cpu, struct rt_rq *rt_rq) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 2e197b8e43f1..183388c4dead 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -567,10 +567,27 @@ update_stats_curr_start(struct cfs_rq *cfs_rq, struct sched_entity *se) * Scheduling class queueing methods: */ +#if defined CONFIG_SMP && defined CONFIG_FAIR_GROUP_SCHED +static void +add_cfs_task_weight(struct cfs_rq *cfs_rq, unsigned long weight) +{ + cfs_rq->task_weight += weight; +} +#else +static inline void +add_cfs_task_weight(struct cfs_rq *cfs_rq, unsigned long weight) +{ +} +#endif + static void account_entity_enqueue(struct cfs_rq *cfs_rq, struct sched_entity *se) { update_load_add(&cfs_rq->load, se->load.weight); + if (!parent_entity(se)) + inc_cpu_load(rq_of(cfs_rq), se->load.weight); + if (entity_is_task(se)) + add_cfs_task_weight(cfs_rq, se->load.weight); cfs_rq->nr_running++; se->on_rq = 1; list_add(&se->group_node, &cfs_rq->tasks); @@ -580,6 +597,10 @@ static void account_entity_dequeue(struct cfs_rq *cfs_rq, struct sched_entity *se) { update_load_sub(&cfs_rq->load, se->load.weight); + if (!parent_entity(se)) + dec_cpu_load(rq_of(cfs_rq), se->load.weight); + if (entity_is_task(se)) + add_cfs_task_weight(cfs_rq, -se->load.weight); cfs_rq->nr_running--; se->on_rq = 0; list_del_init(&se->group_node); @@ -1372,75 +1393,90 @@ static struct task_struct *load_balance_next_fair(void *arg) return __load_balance_iterator(cfs_rq, cfs_rq->balance_iterator); } -#ifdef CONFIG_FAIR_GROUP_SCHED -static int cfs_rq_best_prio(struct cfs_rq *cfs_rq) +static unsigned long +__load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, + unsigned long max_load_move, struct sched_domain *sd, + enum cpu_idle_type idle, int *all_pinned, int *this_best_prio, + struct cfs_rq *cfs_rq) { - struct sched_entity *curr; - struct task_struct *p; - - if (!cfs_rq->nr_running || !first_fair(cfs_rq)) - return MAX_PRIO; - - curr = cfs_rq->curr; - if (!curr) - curr = __pick_next_entity(cfs_rq); + struct rq_iterator cfs_rq_iterator; - p = task_of(curr); + cfs_rq_iterator.start = load_balance_start_fair; + cfs_rq_iterator.next = load_balance_next_fair; + cfs_rq_iterator.arg = cfs_rq; - return p->prio; + return balance_tasks(this_rq, this_cpu, busiest, + max_load_move, sd, idle, all_pinned, + this_best_prio, &cfs_rq_iterator); } -#endif +#ifdef CONFIG_FAIR_GROUP_SCHED static unsigned long load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, unsigned long max_load_move, struct sched_domain *sd, enum cpu_idle_type idle, int *all_pinned, int *this_best_prio) { - struct cfs_rq *busy_cfs_rq; long rem_load_move = max_load_move; - struct rq_iterator cfs_rq_iterator; - - cfs_rq_iterator.start = load_balance_start_fair; - cfs_rq_iterator.next = load_balance_next_fair; + int busiest_cpu = cpu_of(busiest); + struct task_group *tg; - for_each_leaf_cfs_rq(busiest, busy_cfs_rq) { -#ifdef CONFIG_FAIR_GROUP_SCHED - struct cfs_rq *this_cfs_rq; + rcu_read_lock(); + list_for_each_entry(tg, &task_groups, list) { long imbalance; - unsigned long maxload; + unsigned long this_weight, busiest_weight; + long rem_load, max_load, moved_load; + + /* + * empty group + */ + if (!aggregate(tg, sd)->task_weight) + continue; + + rem_load = rem_load_move * aggregate(tg, sd)->rq_weight; + rem_load /= aggregate(tg, sd)->load + 1; + + this_weight = tg->cfs_rq[this_cpu]->task_weight; + busiest_weight = tg->cfs_rq[busiest_cpu]->task_weight; - this_cfs_rq = cpu_cfs_rq(busy_cfs_rq, this_cpu); + imbalance = (busiest_weight - this_weight) / 2; - imbalance = busy_cfs_rq->load.weight - this_cfs_rq->load.weight; - /* Don't pull if this_cfs_rq has more load than busy_cfs_rq */ - if (imbalance <= 0) + if (imbalance < 0) + imbalance = busiest_weight; + + max_load = max(rem_load, imbalance); + moved_load = __load_balance_fair(this_rq, this_cpu, busiest, + max_load, sd, idle, all_pinned, this_best_prio, + tg->cfs_rq[busiest_cpu]); + + if (!moved_load) continue; - /* Don't pull more than imbalance/2 */ - imbalance /= 2; - maxload = min(rem_load_move, imbalance); + move_group_shares(tg, sd, busiest_cpu, this_cpu); - *this_best_prio = cfs_rq_best_prio(this_cfs_rq); -#else -# define maxload rem_load_move -#endif - /* - * pass busy_cfs_rq argument into - * load_balance_[start|next]_fair iterators - */ - cfs_rq_iterator.arg = busy_cfs_rq; - rem_load_move -= balance_tasks(this_rq, this_cpu, busiest, - maxload, sd, idle, all_pinned, - this_best_prio, - &cfs_rq_iterator); + moved_load *= aggregate(tg, sd)->load; + moved_load /= aggregate(tg, sd)->rq_weight + 1; - if (rem_load_move <= 0) + rem_load_move -= moved_load; + if (rem_load_move < 0) break; } + rcu_read_unlock(); return max_load_move - rem_load_move; } +#else +static unsigned long +load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, + unsigned long max_load_move, + struct sched_domain *sd, enum cpu_idle_type idle, + int *all_pinned, int *this_best_prio) +{ + return __load_balance_fair(this_rq, this_cpu, busiest, + max_load_move, sd, idle, all_pinned, + this_best_prio, &busiest->cfs); +} +#endif static int move_one_task_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 6b4a6b5a4167..765932d0399d 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -670,6 +670,8 @@ static void enqueue_task_rt(struct rq *rq, struct task_struct *p, int wakeup) rt_se->timeout = 0; enqueue_rt_entity(rt_se); + + inc_cpu_load(rq, p->se.load.weight); } static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep) @@ -678,6 +680,8 @@ static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep) update_curr_rt(rq); dequeue_rt_entity(rt_se); + + dec_cpu_load(rq, p->se.load.weight); } /* -- cgit v1.2.3 From 76a2a6ee8a0660a29127f05989ac59ae1ce865fa Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:15 +0200 Subject: sched: sched_clock_cpu() based cpu_clock() with sched_clock_cpu() being reasonably in sync between cpus (max 1 jiffy difference) use this to provide cpu_clock(). Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 76 ---------------------------------------------------- kernel/sched_clock.c | 12 +++++++++ 2 files changed, 12 insertions(+), 76 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 874b6da15430..eb3454c410fa 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -818,82 +818,6 @@ static inline u64 global_rt_runtime(void) return (u64)sysctl_sched_rt_runtime * NSEC_PER_USEC; } -unsigned long long time_sync_thresh = 100000; - -static DEFINE_PER_CPU(unsigned long long, time_offset); -static DEFINE_PER_CPU(unsigned long long, prev_cpu_time); - -/* - * Global lock which we take every now and then to synchronize - * the CPUs time. This method is not warp-safe, but it's good - * enough to synchronize slowly diverging time sources and thus - * it's good enough for tracing: - */ -static DEFINE_SPINLOCK(time_sync_lock); -static unsigned long long prev_global_time; - -static unsigned long long __sync_cpu_clock(unsigned long long time, int cpu) -{ - /* - * We want this inlined, to not get tracer function calls - * in this critical section: - */ - spin_acquire(&time_sync_lock.dep_map, 0, 0, _THIS_IP_); - __raw_spin_lock(&time_sync_lock.raw_lock); - - if (time < prev_global_time) { - per_cpu(time_offset, cpu) += prev_global_time - time; - time = prev_global_time; - } else { - prev_global_time = time; - } - - __raw_spin_unlock(&time_sync_lock.raw_lock); - spin_release(&time_sync_lock.dep_map, 1, _THIS_IP_); - - return time; -} - -static unsigned long long __cpu_clock(int cpu) -{ - unsigned long long now; - - /* - * Only call sched_clock() if the scheduler has already been - * initialized (some code might call cpu_clock() very early): - */ - if (unlikely(!scheduler_running)) - return 0; - - now = sched_clock_cpu(cpu); - - return now; -} - -/* - * For kernel-internal use: high-speed (but slightly incorrect) per-cpu - * clock constructed from sched_clock(): - */ -unsigned long long cpu_clock(int cpu) -{ - unsigned long long prev_cpu_time, time, delta_time; - unsigned long flags; - - local_irq_save(flags); - prev_cpu_time = per_cpu(prev_cpu_time, cpu); - time = __cpu_clock(cpu) + per_cpu(time_offset, cpu); - delta_time = time-prev_cpu_time; - - if (unlikely(delta_time > time_sync_thresh)) { - time = __sync_cpu_clock(time, cpu); - per_cpu(prev_cpu_time, cpu) = time; - } - local_irq_restore(flags); - - return time; -} -EXPORT_SYMBOL_GPL(cpu_clock); - #ifndef prepare_arch_switch # define prepare_arch_switch(next) do { } while (0) #endif diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index ce05271219ab..3c696db59452 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -244,3 +244,15 @@ unsigned long long __attribute__((weak)) sched_clock(void) { return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ); } + +unsigned long long cpu_clock(int cpu) +{ + unsigned long long clock; + unsigned long flags; + + raw_local_irq_save(flags); + clock = sched_clock_cpu(cpu); + raw_local_irq_restore(flags); + + return clock; +} -- cgit v1.2.3 From 103638d95ba5b0c53c8d9c0cb581156ccc8513ee Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:16 +0200 Subject: sched: fix wakeup granularity and buddy granularity Uncouple buddy selection from wakeup granularity. The initial idea was that buddies could run ahead as far as a normal task can - do this by measuring a pair 'slice' just as we do for a normal task. This means we can drop the wakeup_granularity back to 5ms. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 1 + kernel/sched_fair.c | 15 +++++++-------- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index eb3454c410fa..7d282c52bd42 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -375,6 +375,7 @@ struct cfs_rq { u64 exec_clock; u64 min_vruntime; + u64 pair_start; struct rb_root tasks_timeline; struct rb_node *rb_leftmost; diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 183388c4dead..509092af0330 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -63,13 +63,13 @@ unsigned int __read_mostly sysctl_sched_compat_yield; /* * SCHED_OTHER wake-up granularity. - * (default: 10 msec * (1 + ilog(ncpus)), units: nanoseconds) + * (default: 5 msec * (1 + ilog(ncpus)), units: nanoseconds) * * This option delays the preemption effects of decoupled workloads * and reduces their over-scheduling. Synchronous workloads will still * have immediate wakeup/sleep latencies. */ -unsigned int sysctl_sched_wakeup_granularity = 10000000UL; +unsigned int sysctl_sched_wakeup_granularity = 5000000UL; const_debug unsigned int sysctl_sched_migration_cost = 500000UL; @@ -813,17 +813,16 @@ set_next_entity(struct cfs_rq *cfs_rq, struct sched_entity *se) se->prev_sum_exec_runtime = se->sum_exec_runtime; } -static int -wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se); - static struct sched_entity * pick_next(struct cfs_rq *cfs_rq, struct sched_entity *se) { - if (!cfs_rq->next) - return se; + struct rq *rq = rq_of(cfs_rq); + u64 pair_slice = rq->clock - cfs_rq->pair_start; - if (wakeup_preempt_entity(cfs_rq->next, se) != 0) + if (!cfs_rq->next || pair_slice > sched_slice(cfs_rq, cfs_rq->next)) { + cfs_rq->pair_start = rq->clock; return se; + } return cfs_rq->next; } -- cgit v1.2.3 From 32df2ee86a580f70f2dbb90cf81f413aa655f838 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:17 +0200 Subject: sched: add full schedstats to /proc/sched_debug show all the schedstats in /debug/sched_debug as well. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_debug.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index 04394ccac88d..bbe6b31c3c56 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -162,8 +162,23 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) SEQ_printf(m, " .%-30s: %ld\n", "nr_running", cfs_rq->nr_running); SEQ_printf(m, " .%-30s: %ld\n", "load", cfs_rq->load.weight); #ifdef CONFIG_SCHEDSTATS - SEQ_printf(m, " .%-30s: %d\n", "bkl_count", - rq->bkl_count); +#define P(n) SEQ_printf(m, " .%-30s: %d\n", #n, rq->n); + + P(yld_exp_empty); + P(yld_act_empty); + P(yld_both_empty); + P(yld_count); + + P(sched_switch); + P(sched_count); + P(sched_goidle); + + P(ttwu_count); + P(ttwu_local); + + P(bkl_count); + +#undef P #endif SEQ_printf(m, " .%-30s: %ld\n", "nr_spread_over", cfs_rq->nr_spread_over); -- cgit v1.2.3 From b6a86c746f5b708012809958462234d19e9c8177 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:18 +0200 Subject: sched: fix sched_domain aggregation Keeping the aggregate on the first cpu of the sched domain has two problems: - it could collide between different sched domains on different cpus - it could slow things down because of the remote accesses Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- include/linux/sched.h | 1 - kernel/sched.c | 113 ++++++++++++++++++++++++-------------------------- kernel/sched_fair.c | 12 +++--- 3 files changed, 60 insertions(+), 66 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 97a58b622ee1..eaf821072dbd 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -765,7 +765,6 @@ struct sched_domain { struct sched_domain *child; /* bottom domain must be null terminated */ struct sched_group *groups; /* the balancing groups of the domain */ cpumask_t span; /* span of all CPUs in this domain */ - int first_cpu; /* cache of the first cpu in this domain */ unsigned long min_interval; /* Minimum balance interval ms */ unsigned long max_interval; /* Maximum balance interval ms */ unsigned int busy_factor; /* less balancing by factor if busy */ diff --git a/kernel/sched.c b/kernel/sched.c index 7d282c52bd42..160d3c209b8f 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1480,12 +1480,12 @@ static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd); */ static inline struct aggregate_struct * -aggregate(struct task_group *tg, struct sched_domain *sd) +aggregate(struct task_group *tg, int cpu) { - return &tg->cfs_rq[sd->first_cpu]->aggregate; + return &tg->cfs_rq[cpu]->aggregate; } -typedef void (*aggregate_func)(struct task_group *, struct sched_domain *); +typedef void (*aggregate_func)(struct task_group *, int, struct sched_domain *); /* * Iterate the full tree, calling @down when first entering a node and @up when @@ -1493,14 +1493,14 @@ typedef void (*aggregate_func)(struct task_group *, struct sched_domain *); */ static void aggregate_walk_tree(aggregate_func down, aggregate_func up, - struct sched_domain *sd) + int cpu, struct sched_domain *sd) { struct task_group *parent, *child; rcu_read_lock(); parent = &root_task_group; down: - (*down)(parent, sd); + (*down)(parent, cpu, sd); list_for_each_entry_rcu(child, &parent->children, siblings) { parent = child; goto down; @@ -1508,7 +1508,7 @@ down: up: continue; } - (*up)(parent, sd); + (*up)(parent, cpu, sd); child = parent; parent = parent->parent; @@ -1520,8 +1520,8 @@ up: /* * Calculate the aggregate runqueue weight. */ -static -void aggregate_group_weight(struct task_group *tg, struct sched_domain *sd) +static void +aggregate_group_weight(struct task_group *tg, int cpu, struct sched_domain *sd) { unsigned long rq_weight = 0; unsigned long task_weight = 0; @@ -1532,15 +1532,15 @@ void aggregate_group_weight(struct task_group *tg, struct sched_domain *sd) task_weight += tg->cfs_rq[i]->task_weight; } - aggregate(tg, sd)->rq_weight = rq_weight; - aggregate(tg, sd)->task_weight = task_weight; + aggregate(tg, cpu)->rq_weight = rq_weight; + aggregate(tg, cpu)->task_weight = task_weight; } /* * Compute the weight of this group on the given cpus. */ -static -void aggregate_group_shares(struct task_group *tg, struct sched_domain *sd) +static void +aggregate_group_shares(struct task_group *tg, int cpu, struct sched_domain *sd) { unsigned long shares = 0; int i; @@ -1548,18 +1548,18 @@ void aggregate_group_shares(struct task_group *tg, struct sched_domain *sd) for_each_cpu_mask(i, sd->span) shares += tg->cfs_rq[i]->shares; - if ((!shares && aggregate(tg, sd)->rq_weight) || shares > tg->shares) + if ((!shares && aggregate(tg, cpu)->rq_weight) || shares > tg->shares) shares = tg->shares; - aggregate(tg, sd)->shares = shares; + aggregate(tg, cpu)->shares = shares; } /* * Compute the load fraction assigned to this group, relies on the aggregate * weight and this group's parent's load, i.e. top-down. */ -static -void aggregate_group_load(struct task_group *tg, struct sched_domain *sd) +static void +aggregate_group_load(struct task_group *tg, int cpu, struct sched_domain *sd) { unsigned long load; @@ -1571,17 +1571,17 @@ void aggregate_group_load(struct task_group *tg, struct sched_domain *sd) load += cpu_rq(i)->load.weight; } else { - load = aggregate(tg->parent, sd)->load; + load = aggregate(tg->parent, cpu)->load; /* * shares is our weight in the parent's rq so * shares/parent->rq_weight gives our fraction of the load */ - load *= aggregate(tg, sd)->shares; - load /= aggregate(tg->parent, sd)->rq_weight + 1; + load *= aggregate(tg, cpu)->shares; + load /= aggregate(tg->parent, cpu)->rq_weight + 1; } - aggregate(tg, sd)->load = load; + aggregate(tg, cpu)->load = load; } static void __set_se_shares(struct sched_entity *se, unsigned long shares); @@ -1590,8 +1590,8 @@ static void __set_se_shares(struct sched_entity *se, unsigned long shares); * Calculate and set the cpu's group shares. */ static void -__update_group_shares_cpu(struct task_group *tg, struct sched_domain *sd, - int tcpu) +__update_group_shares_cpu(struct task_group *tg, int cpu, + struct sched_domain *sd, int tcpu) { int boost = 0; unsigned long shares; @@ -1618,8 +1618,8 @@ __update_group_shares_cpu(struct task_group *tg, struct sched_domain *sd, * \Sum rq_weight * */ - shares = aggregate(tg, sd)->shares * rq_weight; - shares /= aggregate(tg, sd)->rq_weight + 1; + shares = aggregate(tg, cpu)->shares * rq_weight; + shares /= aggregate(tg, cpu)->rq_weight + 1; /* * record the actual number of shares, not the boosted amount. @@ -1639,15 +1639,15 @@ __update_group_shares_cpu(struct task_group *tg, struct sched_domain *sd, * task went to. */ static void -__move_group_shares(struct task_group *tg, struct sched_domain *sd, +__move_group_shares(struct task_group *tg, int cpu, struct sched_domain *sd, int scpu, int dcpu) { unsigned long shares; shares = tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares; - __update_group_shares_cpu(tg, sd, scpu); - __update_group_shares_cpu(tg, sd, dcpu); + __update_group_shares_cpu(tg, cpu, sd, scpu); + __update_group_shares_cpu(tg, cpu, sd, dcpu); /* * ensure we never loose shares due to rounding errors in the @@ -1663,19 +1663,19 @@ __move_group_shares(struct task_group *tg, struct sched_domain *sd, * we need to walk up the tree and change all shares until we hit the root. */ static void -move_group_shares(struct task_group *tg, struct sched_domain *sd, +move_group_shares(struct task_group *tg, int cpu, struct sched_domain *sd, int scpu, int dcpu) { while (tg) { - __move_group_shares(tg, sd, scpu, dcpu); + __move_group_shares(tg, cpu, sd, scpu, dcpu); tg = tg->parent; } } -static -void aggregate_group_set_shares(struct task_group *tg, struct sched_domain *sd) +static void +aggregate_group_set_shares(struct task_group *tg, int cpu, struct sched_domain *sd) { - unsigned long shares = aggregate(tg, sd)->shares; + unsigned long shares = aggregate(tg, cpu)->shares; int i; for_each_cpu_mask(i, sd->span) { @@ -1683,20 +1683,20 @@ void aggregate_group_set_shares(struct task_group *tg, struct sched_domain *sd) unsigned long flags; spin_lock_irqsave(&rq->lock, flags); - __update_group_shares_cpu(tg, sd, i); + __update_group_shares_cpu(tg, cpu, sd, i); spin_unlock_irqrestore(&rq->lock, flags); } - aggregate_group_shares(tg, sd); + aggregate_group_shares(tg, cpu, sd); /* * ensure we never loose shares due to rounding errors in the * above redistribution. */ - shares -= aggregate(tg, sd)->shares; + shares -= aggregate(tg, cpu)->shares; if (shares) { - tg->cfs_rq[sd->first_cpu]->shares += shares; - aggregate(tg, sd)->shares += shares; + tg->cfs_rq[cpu]->shares += shares; + aggregate(tg, cpu)->shares += shares; } } @@ -1704,21 +1704,21 @@ void aggregate_group_set_shares(struct task_group *tg, struct sched_domain *sd) * Calculate the accumulative weight and recursive load of each task group * while walking down the tree. */ -static -void aggregate_get_down(struct task_group *tg, struct sched_domain *sd) +static void +aggregate_get_down(struct task_group *tg, int cpu, struct sched_domain *sd) { - aggregate_group_weight(tg, sd); - aggregate_group_shares(tg, sd); - aggregate_group_load(tg, sd); + aggregate_group_weight(tg, cpu, sd); + aggregate_group_shares(tg, cpu, sd); + aggregate_group_load(tg, cpu, sd); } /* * Rebalance the cpu shares while walking back up the tree. */ -static -void aggregate_get_up(struct task_group *tg, struct sched_domain *sd) +static void +aggregate_get_up(struct task_group *tg, int cpu, struct sched_domain *sd) { - aggregate_group_set_shares(tg, sd); + aggregate_group_set_shares(tg, cpu, sd); } static DEFINE_PER_CPU(spinlock_t, aggregate_lock); @@ -1731,18 +1731,18 @@ static void __init init_aggregate(void) spin_lock_init(&per_cpu(aggregate_lock, i)); } -static int get_aggregate(struct sched_domain *sd) +static int get_aggregate(int cpu, struct sched_domain *sd) { - if (!spin_trylock(&per_cpu(aggregate_lock, sd->first_cpu))) + if (!spin_trylock(&per_cpu(aggregate_lock, cpu))) return 0; - aggregate_walk_tree(aggregate_get_down, aggregate_get_up, sd); + aggregate_walk_tree(aggregate_get_down, aggregate_get_up, cpu, sd); return 1; } -static void put_aggregate(struct sched_domain *sd) +static void put_aggregate(int cpu, struct sched_domain *sd) { - spin_unlock(&per_cpu(aggregate_lock, sd->first_cpu)); + spin_unlock(&per_cpu(aggregate_lock, cpu)); } static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares) @@ -1756,12 +1756,12 @@ static inline void init_aggregate(void) { } -static inline int get_aggregate(struct sched_domain *sd) +static inline int get_aggregate(int cpu, struct sched_domain *sd) { return 0; } -static inline void put_aggregate(struct sched_domain *sd) +static inline void put_aggregate(int cpu, struct sched_domain *sd) { } #endif @@ -3539,7 +3539,7 @@ static int load_balance(int this_cpu, struct rq *this_rq, cpus_setall(*cpus); - unlock_aggregate = get_aggregate(sd); + unlock_aggregate = get_aggregate(this_cpu, sd); /* * When power savings policy is enabled for the parent domain, idle @@ -3678,7 +3678,7 @@ out_one_pinned: ld_moved = 0; out: if (unlock_aggregate) - put_aggregate(sd); + put_aggregate(this_cpu, sd); return ld_moved; } @@ -7292,7 +7292,6 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, ALLNODES); set_domain_attribute(sd, attr); sd->span = *cpu_map; - sd->first_cpu = first_cpu(sd->span); cpu_to_allnodes_group(i, cpu_map, &sd->groups, tmpmask); p = sd; sd_allnodes = 1; @@ -7303,7 +7302,6 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, NODE); set_domain_attribute(sd, attr); sched_domain_node_span(cpu_to_node(i), &sd->span); - sd->first_cpu = first_cpu(sd->span); sd->parent = p; if (p) p->child = sd; @@ -7315,7 +7313,6 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, CPU); set_domain_attribute(sd, attr); sd->span = *nodemask; - sd->first_cpu = first_cpu(sd->span); sd->parent = p; if (p) p->child = sd; @@ -7327,7 +7324,6 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, MC); set_domain_attribute(sd, attr); sd->span = cpu_coregroup_map(i); - sd->first_cpu = first_cpu(sd->span); cpus_and(sd->span, sd->span, *cpu_map); sd->parent = p; p->child = sd; @@ -7340,7 +7336,6 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, SIBLING); set_domain_attribute(sd, attr); sd->span = per_cpu(cpu_sibling_map, i); - sd->first_cpu = first_cpu(sd->span); cpus_and(sd->span, sd->span, *cpu_map); sd->parent = p; p->child = sd; diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 509092af0330..40cf24ab4de8 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1429,11 +1429,11 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, /* * empty group */ - if (!aggregate(tg, sd)->task_weight) + if (!aggregate(tg, this_cpu)->task_weight) continue; - rem_load = rem_load_move * aggregate(tg, sd)->rq_weight; - rem_load /= aggregate(tg, sd)->load + 1; + rem_load = rem_load_move * aggregate(tg, this_cpu)->rq_weight; + rem_load /= aggregate(tg, this_cpu)->load + 1; this_weight = tg->cfs_rq[this_cpu]->task_weight; busiest_weight = tg->cfs_rq[busiest_cpu]->task_weight; @@ -1451,10 +1451,10 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, if (!moved_load) continue; - move_group_shares(tg, sd, busiest_cpu, this_cpu); + move_group_shares(tg, this_cpu, sd, busiest_cpu, this_cpu); - moved_load *= aggregate(tg, sd)->load; - moved_load /= aggregate(tg, sd)->rq_weight + 1; + moved_load *= aggregate(tg, this_cpu)->load; + moved_load /= aggregate(tg, this_cpu)->rq_weight + 1; rem_load_move -= moved_load; if (rem_load_move < 0) -- cgit v1.2.3 From 4d8d595dfa69e1c807bf928f364668a7f30da5dc Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:19 +0200 Subject: sched: update aggregate when holding the RQs It was observed that in __update_group_shares_cpu() rq_weight > aggregate()->rq_weight This is caused by forks/wakeups in between the initial aggregate pass and locking of the RQs for load balance. To avoid this situation partially re-do the aggregation once we have the RQs locked (which avoids new tasks from appearing). Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index 160d3c209b8f..dae20199dc9c 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1721,6 +1721,11 @@ aggregate_get_up(struct task_group *tg, int cpu, struct sched_domain *sd) aggregate_group_set_shares(tg, cpu, sd); } +static void +aggregate_get_nop(struct task_group *tg, int cpu, struct sched_domain *sd) +{ +} + static DEFINE_PER_CPU(spinlock_t, aggregate_lock); static void __init init_aggregate(void) @@ -1740,6 +1745,11 @@ static int get_aggregate(int cpu, struct sched_domain *sd) return 1; } +static void update_aggregate(int cpu, struct sched_domain *sd) +{ + aggregate_walk_tree(aggregate_get_down, aggregate_get_nop, cpu, sd); +} + static void put_aggregate(int cpu, struct sched_domain *sd) { spin_unlock(&per_cpu(aggregate_lock, cpu)); @@ -1761,6 +1771,10 @@ static inline int get_aggregate(int cpu, struct sched_domain *sd) return 0; } +static inline void update_aggregate(int cpu, struct sched_domain *sd) +{ +} + static inline void put_aggregate(int cpu, struct sched_domain *sd) { } @@ -2192,6 +2206,12 @@ find_idlest_group(struct sched_domain *sd, struct task_struct *p, int this_cpu) int load_idx = sd->forkexec_idx; int imbalance = 100 + (sd->imbalance_pct-100)/2; + /* + * now that we have both rqs locked the rq weight won't change + * anymore - so update the stats. + */ + update_aggregate(this_cpu, sd); + do { unsigned long load, avg_load; int local_group; -- cgit v1.2.3 From 53fecd8ae1900fb571086f54f664051004665b55 Mon Sep 17 00:00:00 2001 From: Srivatsa Vaddagiri Date: Fri, 27 Jun 2008 13:41:20 +0200 Subject: sched: kill task_group balancing The idea was to balance groups until we've reached the global goal, however Vatsa rightly pointed out that we might never reach that goal this way - hence take out this logic. [ the initial rationale for this 'feature' was to promote max concurrency within a group - it does not however affect fairness ] Reported-by: Srivatsa Vaddagiri Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 40cf24ab4de8..b10c0d61a2a9 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1422,9 +1422,7 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, rcu_read_lock(); list_for_each_entry(tg, &task_groups, list) { - long imbalance; - unsigned long this_weight, busiest_weight; - long rem_load, max_load, moved_load; + long rem_load, moved_load; /* * empty group @@ -1435,17 +1433,8 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, rem_load = rem_load_move * aggregate(tg, this_cpu)->rq_weight; rem_load /= aggregate(tg, this_cpu)->load + 1; - this_weight = tg->cfs_rq[this_cpu]->task_weight; - busiest_weight = tg->cfs_rq[busiest_cpu]->task_weight; - - imbalance = (busiest_weight - this_weight) / 2; - - if (imbalance < 0) - imbalance = busiest_weight; - - max_load = max(rem_load, imbalance); moved_load = __load_balance_fair(this_rq, this_cpu, busiest, - max_load, sd, idle, all_pinned, this_best_prio, + rem_load, sd, idle, all_pinned, this_best_prio, tg->cfs_rq[busiest_cpu]); if (!moved_load) -- cgit v1.2.3 From d3f40dbab954d83383b6a516582d5c09cc216dcc Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:21 +0200 Subject: sched: dont micro manage share losses We used to try and contain the loss of 'shares' by playing arithmetic games. Replace that by noticing that at the top sched_domain we'll always have the full weight in shares to distribute. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 26 +++----------------------- 1 file changed, 3 insertions(+), 23 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index dae20199dc9c..28229c5d4983 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1551,6 +1551,9 @@ aggregate_group_shares(struct task_group *tg, int cpu, struct sched_domain *sd) if ((!shares && aggregate(tg, cpu)->rq_weight) || shares > tg->shares) shares = tg->shares; + if (!sd->parent || !(sd->parent->flags & SD_LOAD_BALANCE)) + shares = tg->shares; + aggregate(tg, cpu)->shares = shares; } @@ -1642,20 +1645,8 @@ static void __move_group_shares(struct task_group *tg, int cpu, struct sched_domain *sd, int scpu, int dcpu) { - unsigned long shares; - - shares = tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares; - __update_group_shares_cpu(tg, cpu, sd, scpu); __update_group_shares_cpu(tg, cpu, sd, dcpu); - - /* - * ensure we never loose shares due to rounding errors in the - * above redistribution. - */ - shares -= tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares; - if (shares) - tg->cfs_rq[dcpu]->shares += shares; } /* @@ -1675,7 +1666,6 @@ move_group_shares(struct task_group *tg, int cpu, struct sched_domain *sd, static void aggregate_group_set_shares(struct task_group *tg, int cpu, struct sched_domain *sd) { - unsigned long shares = aggregate(tg, cpu)->shares; int i; for_each_cpu_mask(i, sd->span) { @@ -1688,16 +1678,6 @@ aggregate_group_set_shares(struct task_group *tg, int cpu, struct sched_domain * } aggregate_group_shares(tg, cpu, sd); - - /* - * ensure we never loose shares due to rounding errors in the - * above redistribution. - */ - shares -= aggregate(tg, cpu)->shares; - if (shares) { - tg->cfs_rq[cpu]->shares += shares; - aggregate(tg, cpu)->shares += shares; - } } /* -- cgit v1.2.3 From a25b5aca8740ea99d5e18dfc71235a52b685dcf7 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:22 +0200 Subject: sched: no need to aggregate task_weight We only need to know the task_weight of the busiest rq - nothing to do if there are no tasks there. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 16 +--------------- kernel/sched_fair.c | 2 +- 2 files changed, 2 insertions(+), 16 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 28229c5d4983..716cfc8e099e 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -433,12 +433,6 @@ struct cfs_rq { * The sum of all runqueue weights within this span. */ unsigned long rq_weight; - - /* - * Weight contributed by tasks; this is the part we can - * influence by moving tasks around. - */ - unsigned long task_weight; } aggregate; #endif #endif @@ -1473,10 +1467,6 @@ static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd); * rq_weight: * Direct sum of all the cpu's their rq weight, e.g. A would get 3 while * B would get 2. - * - * task_weight: - * Part of the rq_weight contributed by tasks; all groups except B would - * get 1, B gets 2. */ static inline struct aggregate_struct * @@ -1524,16 +1514,12 @@ static void aggregate_group_weight(struct task_group *tg, int cpu, struct sched_domain *sd) { unsigned long rq_weight = 0; - unsigned long task_weight = 0; int i; - for_each_cpu_mask(i, sd->span) { + for_each_cpu_mask(i, sd->span) rq_weight += tg->cfs_rq[i]->load.weight; - task_weight += tg->cfs_rq[i]->task_weight; - } aggregate(tg, cpu)->rq_weight = rq_weight; - aggregate(tg, cpu)->task_weight = task_weight; } /* diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index b10c0d61a2a9..03b9fbd9d648 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1427,7 +1427,7 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, /* * empty group */ - if (!aggregate(tg, this_cpu)->task_weight) + if (!tg->cfs_rq[busiest_cpu]->task_weight) continue; rem_load = rem_load_move * aggregate(tg, this_cpu)->rq_weight; -- cgit v1.2.3 From c8cba857b4997d5b00451d01474638f6a153f713 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:23 +0200 Subject: sched: simplify the group load balancer While thinking about the previous patch - I realized that using per domain aggregate load values in load_balance_fair() is wrong. We should use the load value for that CPU. By not needing per domain hierarchical load values we don't need to store per domain aggregate shares, which greatly simplifies all the math. It basically falls apart in two separate computations: - per domain update of the shares - per CPU update of the hierarchical load Also get rid of the move_group_shares() stuff - just re-compute the shares again after a successful load balance. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 286 ++++++++++++---------------------------------------- kernel/sched_fair.c | 15 +-- 2 files changed, 72 insertions(+), 229 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 716cfc8e099e..f864b751fd19 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -406,34 +406,23 @@ struct cfs_rq { struct task_group *tg; /* group that "owns" this runqueue */ #ifdef CONFIG_SMP - unsigned long task_weight; - unsigned long shares; /* - * We need space to build a sched_domain wide view of the full task - * group tree, in order to avoid depending on dynamic memory allocation - * during the load balancing we place this in the per cpu task group - * hierarchy. This limits the load balancing to one instance per cpu, - * but more should not be needed anyway. + * the part of load.weight contributed by tasks */ - struct aggregate_struct { - /* - * load = weight(cpus) * f(tg) - * - * Where f(tg) is the recursive weight fraction assigned to - * this group. - */ - unsigned long load; + unsigned long task_weight; - /* - * part of the group weight distributed to this span. - */ - unsigned long shares; + /* + * h_load = weight * f(tg) + * + * Where f(tg) is the recursive weight fraction assigned to + * this group. + */ + unsigned long h_load; - /* - * The sum of all runqueue weights within this span. - */ - unsigned long rq_weight; - } aggregate; + /* + * this cpu's part of tg->shares + */ + unsigned long shares; #endif #endif }; @@ -1443,47 +1432,14 @@ static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd); #ifdef CONFIG_FAIR_GROUP_SCHED -/* - * Group load balancing. - * - * We calculate a few balance domain wide aggregate numbers; load and weight. - * Given the pictures below, and assuming each item has equal weight: - * - * root 1 - thread - * / | \ A - group - * A 1 B - * /|\ / \ - * C 2 D 3 4 - * | | - * 5 6 - * - * load: - * A and B get 1/3-rd of the total load. C and D get 1/3-rd of A's 1/3-rd, - * which equals 1/9-th of the total load. - * - * shares: - * The weight of this group on the selected cpus. - * - * rq_weight: - * Direct sum of all the cpu's their rq weight, e.g. A would get 3 while - * B would get 2. - */ - -static inline struct aggregate_struct * -aggregate(struct task_group *tg, int cpu) -{ - return &tg->cfs_rq[cpu]->aggregate; -} - -typedef void (*aggregate_func)(struct task_group *, int, struct sched_domain *); +typedef void (*tg_visitor)(struct task_group *, int, struct sched_domain *); /* * Iterate the full tree, calling @down when first entering a node and @up when * leaving it for the final time. */ -static -void aggregate_walk_tree(aggregate_func down, aggregate_func up, - int cpu, struct sched_domain *sd) +static void +walk_tg_tree(tg_visitor down, tg_visitor up, int cpu, struct sched_domain *sd) { struct task_group *parent, *child; @@ -1507,72 +1463,6 @@ up: rcu_read_unlock(); } -/* - * Calculate the aggregate runqueue weight. - */ -static void -aggregate_group_weight(struct task_group *tg, int cpu, struct sched_domain *sd) -{ - unsigned long rq_weight = 0; - int i; - - for_each_cpu_mask(i, sd->span) - rq_weight += tg->cfs_rq[i]->load.weight; - - aggregate(tg, cpu)->rq_weight = rq_weight; -} - -/* - * Compute the weight of this group on the given cpus. - */ -static void -aggregate_group_shares(struct task_group *tg, int cpu, struct sched_domain *sd) -{ - unsigned long shares = 0; - int i; - - for_each_cpu_mask(i, sd->span) - shares += tg->cfs_rq[i]->shares; - - if ((!shares && aggregate(tg, cpu)->rq_weight) || shares > tg->shares) - shares = tg->shares; - - if (!sd->parent || !(sd->parent->flags & SD_LOAD_BALANCE)) - shares = tg->shares; - - aggregate(tg, cpu)->shares = shares; -} - -/* - * Compute the load fraction assigned to this group, relies on the aggregate - * weight and this group's parent's load, i.e. top-down. - */ -static void -aggregate_group_load(struct task_group *tg, int cpu, struct sched_domain *sd) -{ - unsigned long load; - - if (!tg->parent) { - int i; - - load = 0; - for_each_cpu_mask(i, sd->span) - load += cpu_rq(i)->load.weight; - - } else { - load = aggregate(tg->parent, cpu)->load; - - /* - * shares is our weight in the parent's rq so - * shares/parent->rq_weight gives our fraction of the load - */ - load *= aggregate(tg, cpu)->shares; - load /= aggregate(tg->parent, cpu)->rq_weight + 1; - } - - aggregate(tg, cpu)->load = load; -} - static void __set_se_shares(struct sched_entity *se, unsigned long shares); /* @@ -1580,16 +1470,16 @@ static void __set_se_shares(struct sched_entity *se, unsigned long shares); */ static void __update_group_shares_cpu(struct task_group *tg, int cpu, - struct sched_domain *sd, int tcpu) + unsigned long sd_shares, unsigned long sd_rq_weight) { int boost = 0; unsigned long shares; unsigned long rq_weight; - if (!tg->se[tcpu]) + if (!tg->se[cpu]) return; - rq_weight = tg->cfs_rq[tcpu]->load.weight; + rq_weight = tg->cfs_rq[cpu]->load.weight; /* * If there are currently no tasks on the cpu pretend there is one of @@ -1601,124 +1491,97 @@ __update_group_shares_cpu(struct task_group *tg, int cpu, rq_weight = NICE_0_LOAD; } + if (unlikely(rq_weight > sd_rq_weight)) + rq_weight = sd_rq_weight; + /* * \Sum shares * rq_weight * shares = ----------------------- * \Sum rq_weight * */ - shares = aggregate(tg, cpu)->shares * rq_weight; - shares /= aggregate(tg, cpu)->rq_weight + 1; + shares = (sd_shares * rq_weight) / (sd_rq_weight + 1); /* * record the actual number of shares, not the boosted amount. */ - tg->cfs_rq[tcpu]->shares = boost ? 0 : shares; + tg->cfs_rq[cpu]->shares = boost ? 0 : shares; if (shares < MIN_SHARES) shares = MIN_SHARES; else if (shares > MAX_SHARES) shares = MAX_SHARES; - __set_se_shares(tg->se[tcpu], shares); + __set_se_shares(tg->se[cpu], shares); } /* - * Re-adjust the weights on the cpu the task came from and on the cpu the - * task went to. + * Re-compute the task group their per cpu shares over the given domain. + * This needs to be done in a bottom-up fashion because the rq weight of a + * parent group depends on the shares of its child groups. */ static void -__move_group_shares(struct task_group *tg, int cpu, struct sched_domain *sd, - int scpu, int dcpu) +tg_shares_up(struct task_group *tg, int cpu, struct sched_domain *sd) { - __update_group_shares_cpu(tg, cpu, sd, scpu); - __update_group_shares_cpu(tg, cpu, sd, dcpu); -} + unsigned long rq_weight = 0; + unsigned long shares = 0; + int i; -/* - * Because changing a group's shares changes the weight of the super-group - * we need to walk up the tree and change all shares until we hit the root. - */ -static void -move_group_shares(struct task_group *tg, int cpu, struct sched_domain *sd, - int scpu, int dcpu) -{ - while (tg) { - __move_group_shares(tg, cpu, sd, scpu, dcpu); - tg = tg->parent; + for_each_cpu_mask(i, sd->span) { + rq_weight += tg->cfs_rq[i]->load.weight; + shares += tg->cfs_rq[i]->shares; } -} -static void -aggregate_group_set_shares(struct task_group *tg, int cpu, struct sched_domain *sd) -{ - int i; + if ((!shares && rq_weight) || shares > tg->shares) + shares = tg->shares; + + if (!sd->parent || !(sd->parent->flags & SD_LOAD_BALANCE)) + shares = tg->shares; for_each_cpu_mask(i, sd->span) { struct rq *rq = cpu_rq(i); unsigned long flags; spin_lock_irqsave(&rq->lock, flags); - __update_group_shares_cpu(tg, cpu, sd, i); + __update_group_shares_cpu(tg, i, shares, rq_weight); spin_unlock_irqrestore(&rq->lock, flags); } - - aggregate_group_shares(tg, cpu, sd); } /* - * Calculate the accumulative weight and recursive load of each task group - * while walking down the tree. + * Compute the cpu's hierarchical load factor for each task group. + * This needs to be done in a top-down fashion because the load of a child + * group is a fraction of its parents load. */ static void -aggregate_get_down(struct task_group *tg, int cpu, struct sched_domain *sd) +tg_load_down(struct task_group *tg, int cpu, struct sched_domain *sd) { - aggregate_group_weight(tg, cpu, sd); - aggregate_group_shares(tg, cpu, sd); - aggregate_group_load(tg, cpu, sd); -} - -/* - * Rebalance the cpu shares while walking back up the tree. - */ -static void -aggregate_get_up(struct task_group *tg, int cpu, struct sched_domain *sd) -{ - aggregate_group_set_shares(tg, cpu, sd); -} - -static void -aggregate_get_nop(struct task_group *tg, int cpu, struct sched_domain *sd) -{ -} - -static DEFINE_PER_CPU(spinlock_t, aggregate_lock); + unsigned long load; -static void __init init_aggregate(void) -{ - int i; + if (!tg->parent) { + load = cpu_rq(cpu)->load.weight; + } else { + load = tg->parent->cfs_rq[cpu]->h_load; + load *= tg->cfs_rq[cpu]->shares; + load /= tg->parent->cfs_rq[cpu]->load.weight + 1; + } - for_each_possible_cpu(i) - spin_lock_init(&per_cpu(aggregate_lock, i)); + tg->cfs_rq[cpu]->h_load = load; } -static int get_aggregate(int cpu, struct sched_domain *sd) +static void +tg_nop(struct task_group *tg, int cpu, struct sched_domain *sd) { - if (!spin_trylock(&per_cpu(aggregate_lock, cpu))) - return 0; - - aggregate_walk_tree(aggregate_get_down, aggregate_get_up, cpu, sd); - return 1; } -static void update_aggregate(int cpu, struct sched_domain *sd) +static void update_shares(struct sched_domain *sd) { - aggregate_walk_tree(aggregate_get_down, aggregate_get_nop, cpu, sd); + walk_tg_tree(tg_nop, tg_shares_up, 0, sd); } -static void put_aggregate(int cpu, struct sched_domain *sd) +static void update_h_load(int cpu) { - spin_unlock(&per_cpu(aggregate_lock, cpu)); + walk_tg_tree(tg_load_down, tg_nop, cpu, NULL); } static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares) @@ -1728,22 +1591,10 @@ static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares) #else -static inline void init_aggregate(void) -{ -} - -static inline int get_aggregate(int cpu, struct sched_domain *sd) -{ - return 0; -} - -static inline void update_aggregate(int cpu, struct sched_domain *sd) +static inline void update_shares(struct sched_domain *sd) { } -static inline void put_aggregate(int cpu, struct sched_domain *sd) -{ -} #endif #endif @@ -2172,12 +2023,6 @@ find_idlest_group(struct sched_domain *sd, struct task_struct *p, int this_cpu) int load_idx = sd->forkexec_idx; int imbalance = 100 + (sd->imbalance_pct-100)/2; - /* - * now that we have both rqs locked the rq weight won't change - * anymore - so update the stats. - */ - update_aggregate(this_cpu, sd); - do { unsigned long load, avg_load; int local_group; @@ -3521,12 +3366,9 @@ static int load_balance(int this_cpu, struct rq *this_rq, unsigned long imbalance; struct rq *busiest; unsigned long flags; - int unlock_aggregate; cpus_setall(*cpus); - unlock_aggregate = get_aggregate(this_cpu, sd); - /* * When power savings policy is enabled for the parent domain, idle * sibling can pick up load irrespective of busy siblings. In this case, @@ -3540,6 +3382,7 @@ static int load_balance(int this_cpu, struct rq *this_rq, schedstat_inc(sd, lb_count[idle]); redo: + update_shares(sd); group = find_busiest_group(sd, this_cpu, &imbalance, idle, &sd_idle, cpus, balance); @@ -3663,8 +3506,8 @@ out_one_pinned: else ld_moved = 0; out: - if (unlock_aggregate) - put_aggregate(this_cpu, sd); + if (ld_moved) + update_shares(sd); return ld_moved; } @@ -8019,7 +7862,6 @@ void __init sched_init(void) } #ifdef CONFIG_SMP - init_aggregate(); init_defrootdomain(); #endif diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 03b9fbd9d648..7b8d664d6f22 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1421,17 +1421,20 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, struct task_group *tg; rcu_read_lock(); + update_h_load(busiest_cpu); + list_for_each_entry(tg, &task_groups, list) { + struct cfs_rq *busiest_cfs_rq = tg->cfs_rq[busiest_cpu]; long rem_load, moved_load; /* * empty group */ - if (!tg->cfs_rq[busiest_cpu]->task_weight) + if (!busiest_cfs_rq->task_weight) continue; - rem_load = rem_load_move * aggregate(tg, this_cpu)->rq_weight; - rem_load /= aggregate(tg, this_cpu)->load + 1; + rem_load = rem_load_move * busiest_cfs_rq->load.weight; + rem_load /= busiest_cfs_rq->h_load + 1; moved_load = __load_balance_fair(this_rq, this_cpu, busiest, rem_load, sd, idle, all_pinned, this_best_prio, @@ -1440,10 +1443,8 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, if (!moved_load) continue; - move_group_shares(tg, this_cpu, sd, busiest_cpu, this_cpu); - - moved_load *= aggregate(tg, this_cpu)->load; - moved_load /= aggregate(tg, this_cpu)->rq_weight + 1; + moved_load *= busiest_cfs_rq->h_load; + moved_load /= busiest_cfs_rq->load.weight + 1; rem_load_move -= moved_load; if (rem_load_move < 0) -- cgit v1.2.3 From 3e5459b4bea3ca2618cc02d56d12639f2cba531d Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:24 +0200 Subject: sched: fix newidle smp group balancing Re-compute the shares on newidle - so we can make a decision based on recent data. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index f864b751fd19..cdd09462fc98 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1579,6 +1579,13 @@ static void update_shares(struct sched_domain *sd) walk_tg_tree(tg_nop, tg_shares_up, 0, sd); } +static void update_shares_locked(struct rq *rq, struct sched_domain *sd) +{ + spin_unlock(&rq->lock); + update_shares(sd); + spin_lock(&rq->lock); +} + static void update_h_load(int cpu) { walk_tg_tree(tg_load_down, tg_nop, cpu, NULL); @@ -1595,6 +1602,10 @@ static inline void update_shares(struct sched_domain *sd) { } +static inline void update_shares_locked(struct rq *rq, struct sched_domain *sd) +{ +} + #endif #endif @@ -3543,6 +3554,7 @@ load_balance_newidle(int this_cpu, struct rq *this_rq, struct sched_domain *sd, schedstat_inc(sd, lb_count[CPU_NEWLY_IDLE]); redo: + update_shares_locked(this_rq, sd); group = find_busiest_group(sd, this_cpu, &imbalance, CPU_NEWLY_IDLE, &sd_idle, cpus, NULL); if (!group) { @@ -3586,6 +3598,7 @@ redo: } else sd->nr_balance_failed = 0; + update_shares_locked(this_rq, sd); return ld_moved; out_balanced: -- cgit v1.2.3 From 039a1c41b3a489e34593ea1e1687f6fdad6b13ab Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:25 +0200 Subject: sched: fix sched_balance_self() smp group balancing Finding the least idle cpu is more accurate when done with updated shares. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index cdd09462fc98..39d5495540d2 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2128,6 +2128,9 @@ static int sched_balance_self(int cpu, int flag) sd = tmp; } + if (sd) + update_shares(sd); + while (sd) { cpumask_t span, tmpmask; struct sched_group *group; -- cgit v1.2.3 From a8a51d5e59561aa5b4d66e19eca819b537783e8f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:26 +0200 Subject: sched: persistent average load per task Remove the fall-back to SCHED_LOAD_SCALE by remembering the previous value of cpu_avg_load_per_task() - this is useful because of the hierarchical group model in which task weight can be much smaller. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 39d5495540d2..6a6b0139eb32 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -554,6 +554,8 @@ struct rq { int cpu; int online; + unsigned long avg_load_per_task; + struct task_struct *migration_thread; struct list_head migration_queue; #endif @@ -1427,9 +1429,18 @@ static inline void dec_cpu_load(struct rq *rq, unsigned long load) #ifdef CONFIG_SMP static unsigned long source_load(int cpu, int type); static unsigned long target_load(int cpu, int type); -static unsigned long cpu_avg_load_per_task(int cpu); static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd); +static unsigned long cpu_avg_load_per_task(int cpu) +{ + struct rq *rq = cpu_rq(cpu); + + if (rq->nr_running) + rq->avg_load_per_task = rq->load.weight / rq->nr_running; + + return rq->avg_load_per_task; +} + #ifdef CONFIG_FAIR_GROUP_SCHED typedef void (*tg_visitor)(struct task_group *, int, struct sched_domain *); @@ -2010,18 +2021,6 @@ static unsigned long target_load(int cpu, int type) return max(rq->cpu_load[type-1], total); } -/* - * Return the average load per task on the cpu's run queue - */ -static unsigned long cpu_avg_load_per_task(int cpu) -{ - struct rq *rq = cpu_rq(cpu); - unsigned long total = weighted_cpuload(cpu); - unsigned long n = rq->nr_running; - - return n ? total / n : SCHED_LOAD_SCALE; -} - /* * find_idlest_group finds and returns the least busy CPU group within the * domain. -- cgit v1.2.3 From bb3469ac9b50f14ad6eba129ca0ad4fd033097a0 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:27 +0200 Subject: sched: hierarchical load vs affine wakeups With hierarchical grouping we can't just compare task weight to rq weight - we need to scale the weight appropriately. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 7b8d664d6f22..865cb53a7ccf 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1073,6 +1073,25 @@ static inline int wake_idle(int cpu, struct task_struct *p) static const struct sched_class fair_sched_class; +#ifdef CONFIG_FAIR_GROUP_SCHED +static unsigned long task_h_load(struct task_struct *p) +{ + unsigned long h_load = p->se.load.weight; + struct cfs_rq *cfs_rq = cfs_rq_of(&p->se); + + update_h_load(task_cpu(p)); + + h_load = calc_delta_mine(h_load, cfs_rq->h_load, &cfs_rq->load); + + return h_load; +} +#else +static unsigned long task_h_load(struct task_struct *p) +{ + return p->se.load.weight; +} +#endif + static int wake_affine(struct rq *rq, struct sched_domain *this_sd, struct rq *this_rq, struct task_struct *p, int prev_cpu, int this_cpu, int sync, @@ -1093,9 +1112,9 @@ wake_affine(struct rq *rq, struct sched_domain *this_sd, struct rq *this_rq, * of the current CPU: */ if (sync) - tl -= current->se.load.weight; + tl -= task_h_load(current); - balanced = 100*(tl + p->se.load.weight) <= imbalance*load; + balanced = 100*(tl + task_h_load(p)) <= imbalance*load; /* * If the currently running task will sleep within -- cgit v1.2.3 From 408ed066b11cf9ee4536573b4269ee3613bd735e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:28 +0200 Subject: sched: hierarchical load vs find_busiest_group find_busiest_group() has some assumptions about task weight being in the NICE_0_LOAD range. Hierarchical task groups break this assumption - fix this by replacing it with the average task weight, which will adapt the situation. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 6a6b0139eb32..5e2aa394a812 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -3050,6 +3050,7 @@ find_busiest_group(struct sched_domain *sd, int this_cpu, max_load = this_load = total_load = total_pwr = 0; busiest_load_per_task = busiest_nr_running = 0; this_load_per_task = this_nr_running = 0; + if (idle == CPU_NOT_IDLE) load_idx = sd->busy_idx; else if (idle == CPU_NEWLY_IDLE) @@ -3064,6 +3065,8 @@ find_busiest_group(struct sched_domain *sd, int this_cpu, int __group_imb = 0; unsigned int balance_cpu = -1, first_idle_cpu = 0; unsigned long sum_nr_running, sum_weighted_load; + unsigned long sum_avg_load_per_task; + unsigned long avg_load_per_task; local_group = cpu_isset(this_cpu, group->cpumask); @@ -3072,6 +3075,8 @@ find_busiest_group(struct sched_domain *sd, int this_cpu, /* Tally up the load of all CPUs in the group */ sum_weighted_load = sum_nr_running = avg_load = 0; + sum_avg_load_per_task = avg_load_per_task = 0; + max_cpu_load = 0; min_cpu_load = ~0UL; @@ -3105,6 +3110,8 @@ find_busiest_group(struct sched_domain *sd, int this_cpu, avg_load += load; sum_nr_running += rq->nr_running; sum_weighted_load += weighted_cpuload(i); + + sum_avg_load_per_task += cpu_avg_load_per_task(i); } /* @@ -3126,7 +3133,20 @@ find_busiest_group(struct sched_domain *sd, int this_cpu, avg_load = sg_div_cpu_power(group, avg_load * SCHED_LOAD_SCALE); - if ((max_cpu_load - min_cpu_load) > SCHED_LOAD_SCALE) + + /* + * Consider the group unbalanced when the imbalance is larger + * than the average weight of two tasks. + * + * APZ: with cgroup the avg task weight can vary wildly and + * might not be a suitable number - should we keep a + * normalized nr_running number somewhere that negates + * the hierarchy? + */ + avg_load_per_task = sg_div_cpu_power(group, + sum_avg_load_per_task * SCHED_LOAD_SCALE); + + if ((max_cpu_load - min_cpu_load) > 2*avg_load_per_task) __group_imb = 1; group_capacity = group->__cpu_power / SCHED_LOAD_SCALE; @@ -3267,9 +3287,9 @@ small_imbalance: if (busiest_load_per_task > this_load_per_task) imbn = 1; } else - this_load_per_task = SCHED_LOAD_SCALE; + this_load_per_task = cpu_avg_load_per_task(this_cpu); - if (max_load - this_load + SCHED_LOAD_SCALE_FUZZ >= + if (max_load - this_load + 2*busiest_load_per_task >= busiest_load_per_task * imbn) { *imbalance = busiest_load_per_task; return busiest; -- cgit v1.2.3 From 42a3ac7d5cee89849448b41b86faeb86f98e92f6 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:29 +0200 Subject: sched: fix load scaling in group balancing doing the load balance will change cfs_rq->load.weight (that's the whole point) but since that's part of the scale factor, we'll scale back with a different amount. Weight getting smaller would result in an inflated moved_load which causes it to stop balancing too soon. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 865cb53a7ccf..734e4c556fcb 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1444,6 +1444,8 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, list_for_each_entry(tg, &task_groups, list) { struct cfs_rq *busiest_cfs_rq = tg->cfs_rq[busiest_cpu]; + unsigned long busiest_h_load = busiest_cfs_rq->h_load; + unsigned long busiest_weight = busiest_cfs_rq->load.weight; long rem_load, moved_load; /* @@ -1452,8 +1454,8 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, if (!busiest_cfs_rq->task_weight) continue; - rem_load = rem_load_move * busiest_cfs_rq->load.weight; - rem_load /= busiest_cfs_rq->h_load + 1; + rem_load = rem_load_move * busiest_weight; + rem_load /= busiest_h_load + 1; moved_load = __load_balance_fair(this_rq, this_cpu, busiest, rem_load, sd, idle, all_pinned, this_best_prio, @@ -1462,8 +1464,8 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, if (!moved_load) continue; - moved_load *= busiest_cfs_rq->h_load; - moved_load /= busiest_cfs_rq->load.weight + 1; + moved_load *= busiest_h_load; + moved_load /= busiest_weight + 1; rem_load_move -= moved_load; if (rem_load_move < 0) -- cgit v1.2.3 From 4be9daaa1b33701f011f4117f22dc1e45a3e6e34 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:30 +0200 Subject: sched: fix task_h_load() Currently task_h_load() computes the load of a task and uses that to either subtract it from the total, or add to it. However, removing or adding a task need not have any effect on the total load at all. Imagine adding a task to a group that is local to one cpu - in that case the total load of that cpu is unaffected. So properly compute addition/removal: s_i = S * rw_i / \Sum_j rw_j s'_i = S * (rw_i + wl) / (\Sum_j rw_j + wg) then s'_i - s_i gives the change in load. Where s_i is the shares for cpu i, S the group weight, rw_i the runqueue weight for that cpu, wl the weight we add (subtract) and wg the weight contribution to the runqueue. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 49 ++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 40 insertions(+), 9 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 734e4c556fcb..a1694441f8b7 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1074,22 +1074,53 @@ static inline int wake_idle(int cpu, struct task_struct *p) static const struct sched_class fair_sched_class; #ifdef CONFIG_FAIR_GROUP_SCHED -static unsigned long task_h_load(struct task_struct *p) +static unsigned long effective_load(struct task_group *tg, long wl, int cpu) { - unsigned long h_load = p->se.load.weight; - struct cfs_rq *cfs_rq = cfs_rq_of(&p->se); + struct sched_entity *se = tg->se[cpu]; + long wg = wl; - update_h_load(task_cpu(p)); + for_each_sched_entity(se) { +#define D(n) (likely(n) ? (n) : 1) + + long S, Srw, rw, s, sn; + + S = se->my_q->tg->shares; + s = se->my_q->shares; + rw = se->my_q->load.weight; - h_load = calc_delta_mine(h_load, cfs_rq->h_load, &cfs_rq->load); + Srw = S * rw / D(s); + sn = S * (rw + wl) / D(Srw + wg); + + wl = sn - s; + wg = 0; +#undef D + } - return h_load; + return wl; } + +static unsigned long task_load_sub(struct task_struct *p) +{ + return effective_load(task_group(p), -(long)p->se.load.weight, task_cpu(p)); +} + +static unsigned long task_load_add(struct task_struct *p, int cpu) +{ + return effective_load(task_group(p), p->se.load.weight, cpu); +} + #else -static unsigned long task_h_load(struct task_struct *p) + +static unsigned long task_load_sub(struct task_struct *p) +{ + return -p->se.load.weight; +} + +static unsigned long task_load_add(struct task_struct *p, int cpu) { return p->se.load.weight; } + #endif static int @@ -1112,9 +1143,9 @@ wake_affine(struct rq *rq, struct sched_domain *this_sd, struct rq *this_rq, * of the current CPU: */ if (sync) - tl -= task_h_load(current); + tl += task_load_sub(current); - balanced = 100*(tl + task_h_load(p)) <= imbalance*load; + balanced = 100*(tl + task_load_add(p, this_cpu)) <= imbalance*load; /* * If the currently running task will sleep within -- cgit v1.2.3 From 051c67640e771fd6ad1b676fc0c16c379b3c6f80 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:31 +0200 Subject: sched: remove prio preference from balance decisions Priority looses much of its meaning in a hierarchical context. So don't use it in balance decisions. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 5e2aa394a812..10d43f5bf0fc 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2896,7 +2896,7 @@ balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest, enum cpu_idle_type idle, int *all_pinned, int *this_best_prio, struct rq_iterator *iterator) { - int loops = 0, pulled = 0, pinned = 0, skip_for_load; + int loops = 0, pulled = 0, pinned = 0; struct task_struct *p; long rem_load_move = max_load_move; @@ -2912,14 +2912,8 @@ balance_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest, next: if (!p || loops++ > sysctl_sched_nr_migrate) goto out; - /* - * To help distribute high priority tasks across CPUs we don't - * skip a task if it will be the highest priority task (i.e. smallest - * prio value) on its new queue regardless of its load weight - */ - skip_for_load = (p->se.load.weight >> 1) > rem_load_move + - SCHED_LOAD_SCALE_FUZZ; - if ((skip_for_load && p->prio >= *this_best_prio) || + + if ((p->se.load.weight >> 1) > rem_load_move || !can_migrate_task(p, busiest, this_cpu, sd, idle, &pinned)) { p = iterator->next(iterator->arg); goto next; -- cgit v1.2.3 From cb5ef42a03a13f95a9ea94e6cda4f7a47497871f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:32 +0200 Subject: sched: optimize effective_load() s_i = S * rw_i / \Sum_j rw_j -> \Sum_j rw_j = S * rw_i / s_i -> s'_i = S * (rw_i + w) / (\Sum_j rw_j + w) delta s = s' - s = S * (rw + w) / ((S * rw / s) + w) = s * (S * (rw + w) / (S * rw + s * w) - 1) a = S*(rw+w), b = S*rw + s*w delta s = s * (a-b) / b IOW, trade one divide for two multiplies Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index a1694441f8b7..0d197be3e3e9 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1082,16 +1082,16 @@ static unsigned long effective_load(struct task_group *tg, long wl, int cpu) for_each_sched_entity(se) { #define D(n) (likely(n) ? (n) : 1) - long S, Srw, rw, s, sn; + long S, rw, s, a, b; S = se->my_q->tg->shares; s = se->my_q->shares; rw = se->my_q->load.weight; - Srw = S * rw / D(s); - sn = S * (rw + wl) / D(Srw + wg); + a = S*(rw + wl); + b = S*rw + s*wg; - wl = sn - s; + wl = s*(a-b)/D(b); wg = 0; #undef D } -- cgit v1.2.3 From 93b75217df39e6d75889cc6f8050343286aff4a5 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:33 +0200 Subject: sched: disable source/target_load bias The bias given by source/target_load functions can be very large, disable it by default to get faster convergence. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 4 ++-- kernel/sched_features.h | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 10d43f5bf0fc..6c5eb3bc37e0 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2000,7 +2000,7 @@ static unsigned long source_load(int cpu, int type) struct rq *rq = cpu_rq(cpu); unsigned long total = weighted_cpuload(cpu); - if (type == 0) + if (type == 0 || !sched_feat(LB_BIAS)) return total; return min(rq->cpu_load[type-1], total); @@ -2015,7 +2015,7 @@ static unsigned long target_load(int cpu, int type) struct rq *rq = cpu_rq(cpu); unsigned long total = weighted_cpuload(cpu); - if (type == 0) + if (type == 0 || !sched_feat(LB_BIAS)) return total; return max(rq->cpu_load[type-1], total); diff --git a/kernel/sched_features.h b/kernel/sched_features.h index 04123af2e678..d56e3053e746 100644 --- a/kernel/sched_features.h +++ b/kernel/sched_features.h @@ -8,3 +8,4 @@ SCHED_FEAT(SYNC_WAKEUPS, 1) SCHED_FEAT(HRTICK, 1) SCHED_FEAT(DOUBLE_TICK, 0) SCHED_FEAT(ASYM_GRAN, 1) +SCHED_FEAT(LB_BIAS, 0) \ No newline at end of file -- cgit v1.2.3 From cd80917e4ff465ea77106f8e4fb631eedc4cf426 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:34 +0200 Subject: sched: fix shares boost logic In case the domain is empty, pretend there is a single task on each cpu, so that together with the boost logic we end up giving 1/n shares to each cpu. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index 6c5eb3bc37e0..1cff969f6646 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1549,6 +1549,9 @@ tg_shares_up(struct task_group *tg, int cpu, struct sched_domain *sd) if (!sd->parent || !(sd->parent->flags & SD_LOAD_BALANCE)) shares = tg->shares; + if (!rq_weight) + rq_weight = cpus_weight(sd->span) * NICE_0_LOAD; + for_each_cpu_mask(i, sd->span) { struct rq *rq = cpu_rq(i); unsigned long flags; -- cgit v1.2.3 From 2398f2c6d34b43025f274fc42eaca34d23ec2320 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:35 +0200 Subject: sched: update shares on wakeup We found that the affine wakeup code needs rather accurate load figures to be effective. The trouble is that updating the load figures is fairly expensive with group scheduling. Therefore ratelimit the updating. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- include/linux/sched.h | 3 +++ kernel/sched.c | 30 +++++++++++++++++++++++++++++- kernel/sched_features.h | 3 ++- kernel/sysctl.c | 8 ++++++++ 4 files changed, 42 insertions(+), 2 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index eaf821072dbd..835b6c6fcc56 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -783,6 +783,8 @@ struct sched_domain { unsigned int balance_interval; /* initialise to 1. units in ms. */ unsigned int nr_balance_failed; /* initialise to 0 */ + u64 last_update; + #ifdef CONFIG_SCHEDSTATS /* load_balance() stats */ unsigned int lb_count[CPU_MAX_IDLE_TYPES]; @@ -1605,6 +1607,7 @@ extern unsigned int sysctl_sched_child_runs_first; extern unsigned int sysctl_sched_features; extern unsigned int sysctl_sched_migration_cost; extern unsigned int sysctl_sched_nr_migrate; +extern unsigned int sysctl_sched_shares_ratelimit; int sched_nr_latency_handler(struct ctl_table *table, int write, struct file *file, void __user *buffer, size_t *length, diff --git a/kernel/sched.c b/kernel/sched.c index 1cff969f6646..62db0891025a 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -777,6 +777,12 @@ late_initcall(sched_init_debug); */ const_debug unsigned int sysctl_sched_nr_migrate = 32; +/* + * ratelimit for updating the group shares. + * default: 0.5ms + */ +const_debug unsigned int sysctl_sched_shares_ratelimit = 500000; + /* * period over which we measure -rt task cpu usage in us. * default: 1s @@ -1590,7 +1596,13 @@ tg_nop(struct task_group *tg, int cpu, struct sched_domain *sd) static void update_shares(struct sched_domain *sd) { - walk_tg_tree(tg_nop, tg_shares_up, 0, sd); + u64 now = cpu_clock(raw_smp_processor_id()); + s64 elapsed = now - sd->last_update; + + if (elapsed >= (s64)(u64)sysctl_sched_shares_ratelimit) { + sd->last_update = now; + walk_tg_tree(tg_nop, tg_shares_up, 0, sd); + } } static void update_shares_locked(struct rq *rq, struct sched_domain *sd) @@ -2199,6 +2211,22 @@ static int try_to_wake_up(struct task_struct *p, unsigned int state, int sync) if (!sched_feat(SYNC_WAKEUPS)) sync = 0; +#ifdef CONFIG_SMP + if (sched_feat(LB_WAKEUP_UPDATE)) { + struct sched_domain *sd; + + this_cpu = raw_smp_processor_id(); + cpu = task_cpu(p); + + for_each_domain(this_cpu, sd) { + if (cpu_isset(cpu, sd->span)) { + update_shares(sd); + break; + } + } + } +#endif + smp_wmb(); rq = task_rq_lock(p, &flags); old_state = p->state; diff --git a/kernel/sched_features.h b/kernel/sched_features.h index d56e3053e746..7d616d2a2a3f 100644 --- a/kernel/sched_features.h +++ b/kernel/sched_features.h @@ -8,4 +8,5 @@ SCHED_FEAT(SYNC_WAKEUPS, 1) SCHED_FEAT(HRTICK, 1) SCHED_FEAT(DOUBLE_TICK, 0) SCHED_FEAT(ASYM_GRAN, 1) -SCHED_FEAT(LB_BIAS, 0) \ No newline at end of file +SCHED_FEAT(LB_BIAS, 0) +SCHED_FEAT(LB_WAKEUP_UPDATE, 1) diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 29116652dca8..fe8cdc80ff02 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -264,6 +264,14 @@ static struct ctl_table kern_table[] = { .extra1 = &min_wakeup_granularity_ns, .extra2 = &max_wakeup_granularity_ns, }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "sched_shares_ratelimit", + .data = &sysctl_sched_shares_ratelimit, + .maxlen = sizeof(unsigned int), + .mode = 0644, + .proc_handler = &proc_dointvec, + }, { .ctl_name = CTL_UNNUMBERED, .procname = "sched_child_runs_first", -- cgit v1.2.3 From 243e0e7b7d3b54749ece2e879ecd7e2a11874443 Mon Sep 17 00:00:00 2001 From: Srivatsa Vaddagiri Date: Fri, 27 Jun 2008 13:41:36 +0200 Subject: sched: fix mult overflow It was observed these mults can overflow. Signed-off-by: Srivatsa Vaddagiri Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 0d197be3e3e9..26ebe180cdea 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1477,7 +1477,7 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, struct cfs_rq *busiest_cfs_rq = tg->cfs_rq[busiest_cpu]; unsigned long busiest_h_load = busiest_cfs_rq->h_load; unsigned long busiest_weight = busiest_cfs_rq->load.weight; - long rem_load, moved_load; + u64 rem_load, moved_load; /* * empty group @@ -1485,8 +1485,8 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, if (!busiest_cfs_rq->task_weight) continue; - rem_load = rem_load_move * busiest_weight; - rem_load /= busiest_h_load + 1; + rem_load = (u64)rem_load_move * busiest_weight; + rem_load = div_u64(rem_load, busiest_h_load + 1); moved_load = __load_balance_fair(this_rq, this_cpu, busiest, rem_load, sd, idle, all_pinned, this_best_prio, @@ -1496,7 +1496,7 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, continue; moved_load *= busiest_h_load; - moved_load /= busiest_weight + 1; + moved_load = div_u64(moved_load, busiest_weight + 1); rem_load_move -= moved_load; if (rem_load_move < 0) -- cgit v1.2.3 From 83378269a5fad98f562ebc0f09c349575e6cbfe1 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:37 +0200 Subject: sched: correct wakeup weight calculations rw_i = {2, 4, 1, 0} s_i = {2/7, 4/7, 1/7, 0} wakeup on cpu0, weight=1 rw'_i = {3, 4, 1, 0} s'_i = {3/8, 4/8, 1/8, 0} s_0 = S * rw_0 / \Sum rw_j -> \Sum rw_j = S*rw_0/s_0 = 1*2*7/2 = 7 (correct) s'_0 = S * (rw_0 + 1) / (\Sum rw_j + 1) = 1 * (2+1) / (7+1) = 3/8 (correct so we find that adding 1 to cpu0 gains 5/56 in weight if say the other cpu were, cpu1, we'd also have to calculate its 4/56 loss Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 4 ++++ kernel/sched_fair.c | 48 ++++++++++++++++++++++++++---------------------- 2 files changed, 30 insertions(+), 22 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 62db0891025a..01d3e51b7116 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -365,6 +365,10 @@ static inline void set_task_rq(struct task_struct *p, unsigned int cpu) #else static inline void set_task_rq(struct task_struct *p, unsigned int cpu) { } +static inline struct task_group *task_group(struct task_struct *p) +{ + return NULL; +} #endif /* CONFIG_GROUP_SCHED */ diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 26ebe180cdea..bed2f71e63d9 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1074,10 +1074,10 @@ static inline int wake_idle(int cpu, struct task_struct *p) static const struct sched_class fair_sched_class; #ifdef CONFIG_FAIR_GROUP_SCHED -static unsigned long effective_load(struct task_group *tg, long wl, int cpu) +static unsigned long effective_load(struct task_group *tg, int cpu, + unsigned long wl, unsigned long wg) { struct sched_entity *se = tg->se[cpu]; - long wg = wl; for_each_sched_entity(se) { #define D(n) (likely(n) ? (n) : 1) @@ -1092,6 +1092,13 @@ static unsigned long effective_load(struct task_group *tg, long wl, int cpu) b = S*rw + s*wg; wl = s*(a-b)/D(b); + /* + * Assume the group is already running and will + * thus already be accounted for in the weight. + * + * That is, moving shares between CPUs, does not + * alter the group weight. + */ wg = 0; #undef D } @@ -1099,26 +1106,12 @@ static unsigned long effective_load(struct task_group *tg, long wl, int cpu) return wl; } -static unsigned long task_load_sub(struct task_struct *p) -{ - return effective_load(task_group(p), -(long)p->se.load.weight, task_cpu(p)); -} - -static unsigned long task_load_add(struct task_struct *p, int cpu) -{ - return effective_load(task_group(p), p->se.load.weight, cpu); -} - #else -static unsigned long task_load_sub(struct task_struct *p) +static inline unsigned long effective_load(struct task_group *tg, int cpu, + unsigned long wl, unsigned long wg) { - return -p->se.load.weight; -} - -static unsigned long task_load_add(struct task_struct *p, int cpu) -{ - return p->se.load.weight; + return wl; } #endif @@ -1130,8 +1123,10 @@ wake_affine(struct rq *rq, struct sched_domain *this_sd, struct rq *this_rq, unsigned int imbalance) { struct task_struct *curr = this_rq->curr; + struct task_group *tg; unsigned long tl = this_load; unsigned long tl_per_task; + unsigned long weight; int balanced; if (!(this_sd->flags & SD_WAKE_AFFINE) || !sched_feat(AFFINE_WAKEUPS)) @@ -1142,10 +1137,19 @@ wake_affine(struct rq *rq, struct sched_domain *this_sd, struct rq *this_rq, * effect of the currently running task from the load * of the current CPU: */ - if (sync) - tl += task_load_sub(current); + if (sync) { + tg = task_group(current); + weight = current->se.load.weight; + + tl += effective_load(tg, this_cpu, -weight, -weight); + load += effective_load(tg, prev_cpu, 0, -weight); + } + + tg = task_group(p); + weight = p->se.load.weight; - balanced = 100*(tl + task_load_add(p, this_cpu)) <= imbalance*load; + balanced = 100*(tl + effective_load(tg, this_cpu, weight, weight)) <= + imbalance*(load + effective_load(tg, prev_cpu, 0, weight)); /* * If the currently running task will sleep within -- cgit v1.2.3 From f1d239f73200a5803a89e5929fb3abc1596b7589 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:38 +0200 Subject: sched: incremental effective_load() Increase the accuracy of the effective_load values. Not only consider the current increment (as per the attempted wakeup), but also consider the delta between when we last adjusted the shares and the current situation. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched.c | 6 ++++++ kernel/sched_fair.c | 18 +++++++++++++++--- 2 files changed, 21 insertions(+), 3 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 01d3e51b7116..7613f69f0978 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -427,6 +427,11 @@ struct cfs_rq { * this cpu's part of tg->shares */ unsigned long shares; + + /* + * load.weight at the time we set shares + */ + unsigned long rq_weight; #endif #endif }; @@ -1527,6 +1532,7 @@ __update_group_shares_cpu(struct task_group *tg, int cpu, * record the actual number of shares, not the boosted amount. */ tg->cfs_rq[cpu]->shares = boost ? 0 : shares; + tg->cfs_rq[cpu]->rq_weight = rq_weight; if (shares < MIN_SHARES) shares = MIN_SHARES; diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index bed2f71e63d9..e87f1a52f625 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1074,10 +1074,22 @@ static inline int wake_idle(int cpu, struct task_struct *p) static const struct sched_class fair_sched_class; #ifdef CONFIG_FAIR_GROUP_SCHED -static unsigned long effective_load(struct task_group *tg, int cpu, - unsigned long wl, unsigned long wg) +static long effective_load(struct task_group *tg, int cpu, + long wl, long wg) { struct sched_entity *se = tg->se[cpu]; + long more_w; + + if (!tg->parent) + return wl; + + /* + * Instead of using this increment, also add the difference + * between when the shares were last updated and now. + */ + more_w = se->my_q->load.weight - se->my_q->rq_weight; + wl += more_w; + wg += more_w; for_each_sched_entity(se) { #define D(n) (likely(n) ? (n) : 1) @@ -1086,7 +1098,7 @@ static unsigned long effective_load(struct task_group *tg, int cpu, S = se->my_q->tg->shares; s = se->my_q->shares; - rw = se->my_q->load.weight; + rw = se->my_q->rq_weight; a = S*(rw + wl); b = S*rw + s*wg; -- cgit v1.2.3 From f5bfb7d9ff73d72ee4f2f4830a6f0c9088d00f92 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 27 Jun 2008 13:41:39 +0200 Subject: sched: bias effective_load() error towards failing wake_affine(). Measurement shows that the difference between cgroup:/ and cgroup:/foo wake_affine() results is that the latter succeeds significantly more. Therefore bias the calculations towards failing the test. Signed-off-by: Peter Zijlstra Cc: Srivatsa Vaddagiri Cc: Mike Galbraith Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 28 ++++++++++++++++++++++++++++ kernel/sched_features.h | 1 + 2 files changed, 29 insertions(+) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index e87f1a52f625..9bcc0030a58b 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -1074,6 +1074,27 @@ static inline int wake_idle(int cpu, struct task_struct *p) static const struct sched_class fair_sched_class; #ifdef CONFIG_FAIR_GROUP_SCHED +/* + * effective_load() calculates the load change as seen from the root_task_group + * + * Adding load to a group doesn't make a group heavier, but can cause movement + * of group shares between cpus. Assuming the shares were perfectly aligned one + * can calculate the shift in shares. + * + * The problem is that perfectly aligning the shares is rather expensive, hence + * we try to avoid doing that too often - see update_shares(), which ratelimits + * this change. + * + * We compensate this by not only taking the current delta into account, but + * also considering the delta between when the shares were last adjusted and + * now. + * + * We still saw a performance dip, some tracing learned us that between + * cgroup:/ and cgroup:/foo balancing the number of affine wakeups increased + * significantly. Therefore try to bias the error in direction of failing + * the affine wakeup. + * + */ static long effective_load(struct task_group *tg, int cpu, long wl, long wg) { @@ -1083,6 +1104,13 @@ static long effective_load(struct task_group *tg, int cpu, if (!tg->parent) return wl; + /* + * By not taking the decrease of shares on the other cpu into + * account our error leans towards reducing the affine wakeups. + */ + if (!wl && sched_feat(ASYM_EFF_LOAD)) + return wl; + /* * Instead of using this increment, also add the difference * between when the shares were last updated and now. diff --git a/kernel/sched_features.h b/kernel/sched_features.h index 7d616d2a2a3f..862b06bd560a 100644 --- a/kernel/sched_features.h +++ b/kernel/sched_features.h @@ -10,3 +10,4 @@ SCHED_FEAT(DOUBLE_TICK, 0) SCHED_FEAT(ASYM_GRAN, 1) SCHED_FEAT(LB_BIAS, 0) SCHED_FEAT(LB_WAKEUP_UPDATE, 1) +SCHED_FEAT(ASYM_EFF_LOAD, 1) -- cgit v1.2.3 From 55e12e5e7b1d7e7c05a4be10cb5fd092c039aa78 Mon Sep 17 00:00:00 2001 From: Dhaval Giani Date: Tue, 24 Jun 2008 23:39:43 +0530 Subject: sched: make sched_{rt,fair}.c ifdefs more readable Signed-off-by: Dhaval Giani Cc: Srivatsa Vaddagiri Cc: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 6 +++--- kernel/sched_rt.c | 10 +++++----- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 9bcc0030a58b..2e43d4a748c3 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -921,7 +921,7 @@ static void hrtick_start_fair(struct rq *rq, struct task_struct *p) hrtick_start(rq, delta, requeue); } } -#else +#else /* !CONFIG_SCHED_HRTICK */ static inline void hrtick_start_fair(struct rq *rq, struct task_struct *p) { @@ -1062,7 +1062,7 @@ static int wake_idle(int cpu, struct task_struct *p) } return cpu; } -#else +#else /* !ARCH_HAS_SCHED_WAKE_IDLE*/ static inline int wake_idle(int cpu, struct task_struct *p) { return cpu; @@ -1586,7 +1586,7 @@ move_one_task_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, return 0; } -#endif +#endif /* CONFIG_SMP */ /* * scheduler tick hitting a task of our scheduling class: diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 765932d0399d..47ceac9e8552 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -161,7 +161,7 @@ static inline struct rt_bandwidth *sched_rt_bandwidth(struct rt_rq *rt_rq) return &rt_rq->tg->rt_bandwidth; } -#else +#else /* !CONFIG_RT_GROUP_SCHED */ static inline u64 sched_rt_runtime(struct rt_rq *rt_rq) { @@ -226,7 +226,7 @@ static inline struct rt_bandwidth *sched_rt_bandwidth(struct rt_rq *rt_rq) return &def_rt_bandwidth; } -#endif +#endif /* CONFIG_RT_GROUP_SCHED */ #ifdef CONFIG_SMP static int do_balance_runtime(struct rt_rq *rt_rq) @@ -374,12 +374,12 @@ static int balance_runtime(struct rt_rq *rt_rq) return more; } -#else +#else /* !CONFIG_SMP */ static inline int balance_runtime(struct rt_rq *rt_rq) { return 0; } -#endif +#endif /* CONFIG_SMP */ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun) { @@ -1472,4 +1472,4 @@ static void print_rt_stats(struct seq_file *m, int cpu) print_rt_rq(m, cpu, rt_rq); rcu_read_unlock(); } -#endif +#endif /* CONFIG_SCHED_DEBUG */ -- cgit v1.2.3 From 4c9fe8ad813b257a2b9ddf0f752105a75a7dae63 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 27 Jun 2008 14:49:35 +0200 Subject: sched: export cpu_clock the rcutorture module relies on cpu_clock. Signed-off-by: Ingo Molnar --- kernel/sched_clock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index 3c696db59452..ed5a8c415046 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -256,3 +256,4 @@ unsigned long long cpu_clock(int cpu) return clock; } +EXPORT_SYMBOL_GPL(cpu_clock); -- cgit v1.2.3 From b788ed5c97c2bae978cb84a95ea37a1aa6458ea8 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Sun, 8 Jun 2008 23:16:24 +0200 Subject: avr32: Provide PCI DMA mapping API Some non-PCI drivers need the PCI variant of the DMA mapping API. Include to provide this through the non-PCI DMA mapping API. Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/pci.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-avr32/pci.h b/include/asm-avr32/pci.h index 0f5f134b896a..a32a02372017 100644 --- a/include/asm-avr32/pci.h +++ b/include/asm-avr32/pci.h @@ -5,4 +5,6 @@ #define PCI_DMA_BUS_IS_PHYS (1) +#include + #endif /* __ASM_AVR32_PCI_H__ */ -- cgit v1.2.3 From 8bd8974fcddc468d66bd67f33c578f37987b302e Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Sun, 8 Jun 2008 23:28:45 +0200 Subject: avr32: export empty_zero_page Fixes one of two ext4 build problems: ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined! Signed-off-by: Haavard Skinnemoen --- arch/avr32/mm/init.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c index 0e64ddc45e37..5ee1e407dcf7 100644 --- a/arch/avr32/mm/init.c +++ b/arch/avr32/mm/init.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -28,6 +29,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD]; struct page *empty_zero_page; +EXPORT_SYMBOL(empty_zero_page); /* * Cache of MMU context last used. -- cgit v1.2.3 From 60ed7951d0c9bf8de8588384134f16474367b410 Mon Sep 17 00:00:00 2001 From: Alex Date: Mon, 17 Mar 2008 14:55:06 +0100 Subject: avr32: Allow board to define oscillator rates On our custom board we have other oscillator rates than on atngw100 and atstk100x. Currently these rates are hardcoded in arch/avr32/mach-at32ap/at32ap700x.c. This patch moves them into board specific code. Signed-off-by: Alex Raimondi Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atngw100/setup.c | 7 +++++++ arch/avr32/boards/atstk1000/atstk1002.c | 6 ++++++ arch/avr32/boards/atstk1000/atstk1003.c | 7 +++++++ arch/avr32/boards/atstk1000/atstk1004.c | 7 +++++++ arch/avr32/mach-at32ap/at32ap700x.c | 9 +-------- include/asm-avr32/arch-at32ap/board.h | 6 ++++++ 6 files changed, 34 insertions(+), 8 deletions(-) diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index a398be284966..00ce961c52a5 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -25,6 +25,13 @@ #include #include +/* Oscillator frequencies. These are board-specific */ +unsigned long at32_board_osc_rates[3] = { + [0] = 32768, /* 32.768 kHz on RTC osc */ + [1] = 20000000, /* 20 MHz on osc0 */ + [2] = 12000000, /* 12 MHz on osc1 */ +}; + /* Initialized by bootloader-specific startup code. */ struct tag *bootloader_tags __initdata; diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 000eb4220a12..0e1332686867 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -28,6 +28,12 @@ #include "atstk1000.h" +/* Oscillator frequencies. These are board specific */ +unsigned long at32_board_osc_rates[3] = { + [0] = 32768, /* 32.768 kHz on RTC osc */ + [1] = 20000000, /* 20 MHz on osc0 */ + [2] = 12000000, /* 12 MHz on osc1 */ +}; struct eth_addr { u8 addr[6]; diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index a0b223df35a2..ea109f435a83 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -27,6 +27,13 @@ #include "atstk1000.h" +/* Oscillator frequencies. These are board specific */ +unsigned long at32_board_osc_rates[3] = { + [0] = 32768, /* 32.768 kHz on RTC osc */ + [1] = 20000000, /* 20 MHz on osc0 */ + [2] = 12000000, /* 12 MHz on osc1 */ +}; + #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC static struct at73c213_board_info at73c213_data = { .ssc_id = 0, diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index e765a8652b3e..cbf09dd0db53 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -29,6 +29,13 @@ #include "atstk1000.h" +/* Oscillator frequencies. These are board specific */ +unsigned long at32_board_osc_rates[3] = { + [0] = 32768, /* 32.768 kHz on RTC osc */ + [1] = 20000000, /* 20 MHz on osc0 */ + [2] = 12000000, /* 12 MHz on osc1 */ +}; + #ifdef CONFIG_BOARD_ATSTK1000_EXTDAC static struct at73c213_board_info at73c213_data = { .ssc_id = 0, diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 0f24b4f85c17..34b56de4ea60 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -93,19 +93,12 @@ static struct clk devname##_##_name = { \ static DEFINE_SPINLOCK(pm_lock); -unsigned long at32ap7000_osc_rates[3] = { - [0] = 32768, - /* FIXME: these are ATSTK1002-specific */ - [1] = 20000000, - [2] = 12000000, -}; - static struct clk osc0; static struct clk osc1; static unsigned long osc_get_rate(struct clk *clk) { - return at32ap7000_osc_rates[clk->index]; + return at32_board_osc_rates[clk->index]; } static unsigned long pll_get_rate(struct clk *clk, unsigned long control) diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h index a4e2d28bfb58..cfd3060d5b26 100644 --- a/include/asm-avr32/arch-at32ap/board.h +++ b/include/asm-avr32/arch-at32ap/board.h @@ -8,6 +8,12 @@ #define GPIO_PIN_NONE (-1) +/* + * Clock rates for various on-board oscillators. The number of entries + * in this array is chip-dependent. + */ +extern unsigned long at32_board_osc_rates[]; + /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */ void at32_add_system_devices(void); -- cgit v1.2.3 From 7c1b90a1e964f72bde88511e5cfe1c04318ff3d1 Mon Sep 17 00:00:00 2001 From: Martin Koegler Date: Wed, 28 May 2008 20:50:07 +0200 Subject: avr32: Fix sigaltstack behaviour A signal handler should be able to change the signal stack used for the next signal by altering the ucontext_t passed as a parameter to the handler. This does not currently work on avr32 since it doesn't update the in-kernel signal context from the ucontext_t upon signal handler return. Fix it by adding a call to do_sigaltstack() from sys_rt_sigreturn(), bringing it in line with most other architectures. Signed-off-by: Martin Koegler [haavard.skinnemoen@atmel.com: changed patch description] Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/signal.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c index 5616a00c10ba..c5b11f9067f1 100644 --- a/arch/avr32/kernel/signal.c +++ b/arch/avr32/kernel/signal.c @@ -93,6 +93,9 @@ asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) goto badframe; + if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT) + goto badframe; + pr_debug("Context restored: pc = %08lx, lr = %08lx, sp = %08lx\n", regs->pc, regs->lr, regs->sp); -- cgit v1.2.3 From c1f24ac99f3711a6caa0e1d1c01a071ed72a7e0b Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 9 Jun 2008 14:16:06 +0200 Subject: avr32: Fix wrong I/O access size in __raw_readsb __raw_readsb() should always use byte accesses, never halfword accesses, to I/O memory. Signed-off-by: Haavard Skinnemoen --- arch/avr32/lib/io-readsb.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/avr32/lib/io-readsb.S b/arch/avr32/lib/io-readsb.S index 2be5da7ed26b..cb2d86945559 100644 --- a/arch/avr32/lib/io-readsb.S +++ b/arch/avr32/lib/io-readsb.S @@ -41,7 +41,7 @@ __raw_readsb: 2: sub r10, -4 reteq r12 -3: ld.uh r8, r12[0] +3: ld.ub r8, r12[0] sub r10, 1 st.b r11++, r8 brne 3b -- cgit v1.2.3 From aafafddb01e259cff61b3d3f5b3466f0a6a65b84 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 10 Jun 2008 13:55:52 +0200 Subject: avr32: minor GPIO handling updates On the odd chance some code uses a pin as a GPIO IRQ without calling gpio_request() or gpio_direction_input(), the debug dump should still show its pin status. Signed-off-by: David Brownell Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/pio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c index 38a8fa31c0b5..60da03ba7117 100644 --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c @@ -318,6 +318,8 @@ static void pio_bank_show(struct seq_file *s, struct gpio_chip *chip) const char *label; label = gpiochip_is_requested(chip, i); + if (!label && (imr & mask)) + label = "[irq]"; if (!label) continue; -- cgit v1.2.3 From 47882cf620bcd7b014f6f7fc11be8c045787adac Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Tue, 5 Feb 2008 15:27:16 +0100 Subject: avr32: Add pin configuration choice to LCDC peripheral This patch lets the board code choose which pin out to use for the LCD interface. On AT32AP7000 the LCDC is wired to two sets of pins, which lets the user choose between dual ethernet and 32-bit EBI. For the ATNGW100 board it is vital to have the choice to select the alternative pinout since this pinout is routed to the external headers. Update ATSTK1002 and ATSTK1004 to use the new interface. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atstk1000/atstk1002.c | 2 +- arch/avr32/boards/atstk1000/atstk1004.c | 2 +- arch/avr32/mach-at32ap/at32ap700x.c | 105 ++++++++++++++++++++++---------- include/asm-avr32/arch-at32ap/board.h | 3 +- 4 files changed, 77 insertions(+), 35 deletions(-) diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 0e1332686867..86b363c1c25b 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -238,7 +238,7 @@ static int __init atstk1002_init(void) set_hw_addr(at32_add_device_eth(1, ð_data[1])); #else at32_add_device_lcdc(0, &atstk1000_lcdc_data, - fbmem_start, fbmem_size); + fbmem_start, fbmem_size, 0); #endif at32_add_device_usba(0, NULL); #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index cbf09dd0db53..c7236df74d74 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -140,7 +140,7 @@ static int __init atstk1004_init(void) at32_add_device_mci(0); #endif at32_add_device_lcdc(0, &atstk1000_lcdc_data, - fbmem_start, fbmem_size); + fbmem_start, fbmem_size, 0); at32_add_device_usba(0, NULL); #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM at32_add_device_ssc(0, ATMEL_SSC_TX); diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 34b56de4ea60..08115f9243fb 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1257,7 +1257,8 @@ static struct clk atmel_lcdfb0_pixclk = { struct platform_device *__init at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, - unsigned long fbmem_start, unsigned long fbmem_len) + unsigned long fbmem_start, unsigned long fbmem_len, + unsigned int pin_config) { struct platform_device *pdev; struct atmel_lcdfb_info *info; @@ -1284,37 +1285,77 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, switch (id) { case 0: pdev = &atmel_lcdfb0_device; - select_peripheral(PC(19), PERIPH_A, 0); /* CC */ - select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ - select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ - select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */ - select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */ - select_peripheral(PC(24), PERIPH_A, 0); /* MODE */ - select_peripheral(PC(25), PERIPH_A, 0); /* PWR */ - select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */ - select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */ - select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */ - select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */ - select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */ - select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */ - select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */ - select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */ - select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */ - select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */ - select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */ - select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */ - select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */ - select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */ - select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */ - select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */ - select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */ - select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */ - select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */ - select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */ - select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */ - select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */ - select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ - select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ + + switch (pin_config) { + case 0: + select_peripheral(PC(19), PERIPH_A, 0); /* CC */ + select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ + select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ + select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */ + select_peripheral(PC(23), PERIPH_A, 0); /* DVAL */ + select_peripheral(PC(24), PERIPH_A, 0); /* MODE */ + select_peripheral(PC(25), PERIPH_A, 0); /* PWR */ + select_peripheral(PC(26), PERIPH_A, 0); /* DATA0 */ + select_peripheral(PC(27), PERIPH_A, 0); /* DATA1 */ + select_peripheral(PC(28), PERIPH_A, 0); /* DATA2 */ + select_peripheral(PC(29), PERIPH_A, 0); /* DATA3 */ + select_peripheral(PC(30), PERIPH_A, 0); /* DATA4 */ + select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */ + select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */ + select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */ + select_peripheral(PD(2), PERIPH_A, 0); /* DATA8 */ + select_peripheral(PD(3), PERIPH_A, 0); /* DATA9 */ + select_peripheral(PD(4), PERIPH_A, 0); /* DATA10 */ + select_peripheral(PD(5), PERIPH_A, 0); /* DATA11 */ + select_peripheral(PD(6), PERIPH_A, 0); /* DATA12 */ + select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */ + select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */ + select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */ + select_peripheral(PD(10), PERIPH_A, 0); /* DATA16 */ + select_peripheral(PD(11), PERIPH_A, 0); /* DATA17 */ + select_peripheral(PD(12), PERIPH_A, 0); /* DATA18 */ + select_peripheral(PD(13), PERIPH_A, 0); /* DATA19 */ + select_peripheral(PD(14), PERIPH_A, 0); /* DATA20 */ + select_peripheral(PD(15), PERIPH_A, 0); /* DATA21 */ + select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ + select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ + break; + case 1: + select_peripheral(PE(0), PERIPH_B, 0); /* CC */ + select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ + select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ + select_peripheral(PC(22), PERIPH_A, 0); /* VSYNC */ + select_peripheral(PE(1), PERIPH_B, 0); /* DVAL */ + select_peripheral(PE(2), PERIPH_B, 0); /* MODE */ + select_peripheral(PC(25), PERIPH_A, 0); /* PWR */ + select_peripheral(PE(3), PERIPH_B, 0); /* DATA0 */ + select_peripheral(PE(4), PERIPH_B, 0); /* DATA1 */ + select_peripheral(PE(5), PERIPH_B, 0); /* DATA2 */ + select_peripheral(PE(6), PERIPH_B, 0); /* DATA3 */ + select_peripheral(PE(7), PERIPH_B, 0); /* DATA4 */ + select_peripheral(PC(31), PERIPH_A, 0); /* DATA5 */ + select_peripheral(PD(0), PERIPH_A, 0); /* DATA6 */ + select_peripheral(PD(1), PERIPH_A, 0); /* DATA7 */ + select_peripheral(PE(8), PERIPH_B, 0); /* DATA8 */ + select_peripheral(PE(9), PERIPH_B, 0); /* DATA9 */ + select_peripheral(PE(10), PERIPH_B, 0); /* DATA10 */ + select_peripheral(PE(11), PERIPH_B, 0); /* DATA11 */ + select_peripheral(PE(12), PERIPH_B, 0); /* DATA12 */ + select_peripheral(PD(7), PERIPH_A, 0); /* DATA13 */ + select_peripheral(PD(8), PERIPH_A, 0); /* DATA14 */ + select_peripheral(PD(9), PERIPH_A, 0); /* DATA15 */ + select_peripheral(PE(13), PERIPH_B, 0); /* DATA16 */ + select_peripheral(PE(14), PERIPH_B, 0); /* DATA17 */ + select_peripheral(PE(15), PERIPH_B, 0); /* DATA18 */ + select_peripheral(PE(16), PERIPH_B, 0); /* DATA19 */ + select_peripheral(PE(17), PERIPH_B, 0); /* DATA20 */ + select_peripheral(PE(18), PERIPH_B, 0); /* DATA21 */ + select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ + select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ + break; + default: + goto err_invalid_id; + } clk_set_parent(&atmel_lcdfb0_pixclk, &pll0); clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0)); diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h index cfd3060d5b26..a78206cdb3dc 100644 --- a/include/asm-avr32/arch-at32ap/board.h +++ b/include/asm-avr32/arch-at32ap/board.h @@ -42,7 +42,8 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n); struct atmel_lcdfb_info; struct platform_device * at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, - unsigned long fbmem_start, unsigned long fbmem_len); + unsigned long fbmem_start, unsigned long fbmem_len, + unsigned int pin_config); struct usba_platform_data; struct platform_device * -- cgit v1.2.3 From d86d314f67191011e6f494f6517b8cbd7dd3dc39 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Mon, 25 Feb 2008 11:24:30 +0100 Subject: avr32: Add PSIF platform devices This patch adds the PS/2 interface (PSIF) to the device code, split into two platform devices, one for each port. The function for adding the PSIF platform device is also added to the board header file. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/at32ap700x.c | 77 +++++++++++++++++++++++++++++++++++ include/asm-avr32/arch-at32ap/board.h | 1 + 2 files changed, 78 insertions(+) diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 08115f9243fb..a9ae7bb108b2 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -833,6 +833,81 @@ void __init at32_add_system_devices(void) platform_device_register(&pio4_device); } +/* -------------------------------------------------------------------- + * PSIF + * -------------------------------------------------------------------- */ +static struct resource atmel_psif0_resource[] __initdata = { + { + .start = 0xffe03c00, + .end = 0xffe03cff, + .flags = IORESOURCE_MEM, + }, + IRQ(18), +}; +static struct clk atmel_psif0_pclk = { + .name = "pclk", + .parent = &pba_clk, + .mode = pba_clk_mode, + .get_rate = pba_clk_get_rate, + .index = 15, +}; + +static struct resource atmel_psif1_resource[] __initdata = { + { + .start = 0xffe03d00, + .end = 0xffe03dff, + .flags = IORESOURCE_MEM, + }, + IRQ(18), +}; +static struct clk atmel_psif1_pclk = { + .name = "pclk", + .parent = &pba_clk, + .mode = pba_clk_mode, + .get_rate = pba_clk_get_rate, + .index = 15, +}; + +struct platform_device *__init at32_add_device_psif(unsigned int id) +{ + struct platform_device *pdev; + + if (!(id == 0 || id == 1)) + return NULL; + + pdev = platform_device_alloc("atmel_psif", id); + if (!pdev) + return NULL; + + switch (id) { + case 0: + if (platform_device_add_resources(pdev, atmel_psif0_resource, + ARRAY_SIZE(atmel_psif0_resource))) + goto err_add_resources; + atmel_psif0_pclk.dev = &pdev->dev; + select_peripheral(PA(8), PERIPH_A, 0); /* CLOCK */ + select_peripheral(PA(9), PERIPH_A, 0); /* DATA */ + break; + case 1: + if (platform_device_add_resources(pdev, atmel_psif1_resource, + ARRAY_SIZE(atmel_psif1_resource))) + goto err_add_resources; + atmel_psif1_pclk.dev = &pdev->dev; + select_peripheral(PB(11), PERIPH_A, 0); /* CLOCK */ + select_peripheral(PB(12), PERIPH_A, 0); /* DATA */ + break; + default: + return NULL; + } + + platform_device_add(pdev); + return pdev; + +err_add_resources: + platform_device_put(pdev); + return NULL; +} + /* -------------------------------------------------------------------- * USART * -------------------------------------------------------------------- */ @@ -1934,6 +2009,8 @@ struct clk *at32_clock_list[] = { &pio4_mck, &at32_tcb0_t0_clk, &at32_tcb1_t0_clk, + &atmel_psif0_pclk, + &atmel_psif1_pclk, &atmel_usart0_usart, &atmel_usart1_usart, &atmel_usart2_usart, diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h index a78206cdb3dc..b4cddfaca90e 100644 --- a/include/asm-avr32/arch-at32ap/board.h +++ b/include/asm-avr32/arch-at32ap/board.h @@ -80,6 +80,7 @@ struct platform_device *at32_add_device_twi(unsigned int id, struct platform_device *at32_add_device_mci(unsigned int id); struct platform_device *at32_add_device_ac97c(unsigned int id); struct platform_device *at32_add_device_abdac(unsigned int id); +struct platform_device *at32_add_device_psif(unsigned int id); struct cf_platform_data { int detect_pin; -- cgit v1.2.3 From 7ef31e9c4e711bfb817a15b54e428e5c4a7c0032 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 12 Jun 2008 12:18:05 -0700 Subject: avr32: improve NGW100 I2C/PMBus setup Basic I2C initialization for the NGW100 board: - Provide empty i2c device table. Daughtercards may add devices, and the ATtiny24 could do stuff too. - Set up EXTINT(3) so the ATtiny24 can interrupt the AP7000. Signed-off-by: David Brownell Signed-off-by: Haavard Skinnemoen --- arch/avr32/boards/atngw100/setup.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index 00ce961c52a5..a51bb9fb3c89 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -9,6 +9,8 @@ */ #include #include +#include +#include #include #include #include @@ -147,6 +149,10 @@ static struct platform_device i2c_gpio_device = { }, }; +static struct i2c_board_info __initdata i2c_info[] = { + /* NOTE: original ATtiny24 firmware is at address 0x0b */ +}; + static int __init atngw100_init(void) { unsigned i; @@ -172,12 +178,28 @@ static int __init atngw100_init(void) } platform_device_register(&ngw_gpio_leds); + /* all these i2c/smbus pins should have external pullups for + * open-drain sharing among all I2C devices. SDA and SCL do; + * PB28/EXTINT3 doesn't; it should be SMBALERT# (for PMBus), + * but it's not available off-board. + */ + at32_select_periph(GPIO_PIN_PB(28), 0, AT32_GPIOF_PULLUP); at32_select_gpio(i2c_gpio_data.sda_pin, AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); at32_select_gpio(i2c_gpio_data.scl_pin, AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); platform_device_register(&i2c_gpio_device); + i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); return 0; } postcore_initcall(atngw100_init); + +static int __init atngw100_arch_init(void) +{ + /* set_irq_type() after the arch_initcall for EIC has run, and + * before the I2C subsystem could try using this IRQ. + */ + return set_irq_type(AT32_EXTINT(3), IRQ_TYPE_EDGE_FALLING); +} +arch_initcall(atngw100_arch_init); -- cgit v1.2.3 From 9c2baf785e90419d6f9af6bd07aa0694020cba8d Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 18 Jun 2008 02:31:43 -0700 Subject: at32ap700x spi: enable pullups on MISO This is a minor tweak to the at32ap700x pin configuration for the SPI input pin (MISO), enabling the on-chip weak pullup (typical 190K) to (a) ensure a fixed data value for missing or input-only slaves; (b) prevent power waste associated with inputs floating near VDDIO/2. Atmel's boards have no external pullup or pulldown on these pins, so it's unlikely other boards would address these issues with external pulldowns. Were there trouble, board-specific code could turn off the relevant pullup(s). Signed-off-by: David Brownell Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/at32ap700x.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index a9ae7bb108b2..a2e7b96b5e8c 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1181,7 +1181,8 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) switch (id) { case 0: pdev = &atmel_spi0_device; - select_peripheral(PA(0), PERIPH_A, 0); /* MISO */ + /* pullup MISO so a level is always defined */ + select_peripheral(PA(0), PERIPH_A, AT32_GPIOF_PULLUP); select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */ at32_spi_setup_slaves(0, b, n, spi0_pins); @@ -1189,7 +1190,8 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) case 1: pdev = &atmel_spi1_device; - select_peripheral(PB(0), PERIPH_B, 0); /* MISO */ + /* pullup MISO so a level is always defined */ + select_peripheral(PB(0), PERIPH_B, AT32_GPIOF_PULLUP); select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */ at32_spi_setup_slaves(1, b, n, spi1_pins); -- cgit v1.2.3 From 8405996ff6d89bbf275a206eb69d10b98a8d5257 Mon Sep 17 00:00:00 2001 From: Sedji Gaouaou Date: Wed, 25 Jun 2008 10:32:50 +0200 Subject: atmel_pwm: Rename the "mck" clock to "pwm_clk" The name "mck" causes a conflict on AT91. Call it "pwm_clk" instead. Signed-off-by: Sedji Gaouaou Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/at32ap700x.c | 2 +- drivers/misc/atmel_pwm.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index a2e7b96b5e8c..2f208eb4d3c9 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1471,7 +1471,7 @@ static struct resource atmel_pwm0_resource[] __initdata = { IRQ(24), }; static struct clk atmel_pwm0_mck = { - .name = "mck", + .name = "pwm_clk", .parent = &pbb_clk, .mode = pbb_clk_mode, .get_rate = pbb_clk_get_rate, diff --git a/drivers/misc/atmel_pwm.c b/drivers/misc/atmel_pwm.c index 0d5ce03cdff2..5b5a14dab3d3 100644 --- a/drivers/misc/atmel_pwm.c +++ b/drivers/misc/atmel_pwm.c @@ -332,7 +332,7 @@ static int __init pwm_probe(struct platform_device *pdev) p->base = ioremap(r->start, r->end - r->start + 1); if (!p->base) goto fail; - p->clk = clk_get(&pdev->dev, "mck"); + p->clk = clk_get(&pdev->dev, "pwm_clk"); if (IS_ERR(p->clk)) { status = PTR_ERR(p->clk); p->clk = NULL; -- cgit v1.2.3 From 9d8ad5d6c7fce31fd2c0fd4fe9977bda3e92e340 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 27 Jun 2008 17:22:17 +0200 Subject: x86: don't destroy %rbp on kernel-mode faults From the code: "B stepping K8s sometimes report an truncated RIP for IRET exceptions returning to compat mode. Check for these here too." The code then proceeds to truncate the upper 32 bits of %rbp. This means that when do_page_fault() is finally called, its prologue, do_page_fault: push %rbp movl %rsp, %rbp will put the truncated base pointer on the stack. This means that the stack tracer will not be able to follow the base-pointer changes and will see all subsequent stack frames as unreliable. This patch changes the code to use a different register (%rcx) for the checking and leaves %rbp untouched. Signed-off-by: Vegard Nossum Signed-off-by: Pekka Enberg Acked-by: Arjan van de Ven Cc: Andi Kleen Cc: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/entry_64.S | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 556a8df522a7..fa1c9eb7f604 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -926,11 +926,11 @@ error_kernelspace: iret run with kernel gs again, so don't set the user space flag. B stepping K8s sometimes report an truncated RIP for IRET exceptions returning to compat mode. Check for these here too. */ - leaq irq_return(%rip),%rbp - cmpq %rbp,RIP(%rsp) + leaq irq_return(%rip),%rcx + cmpq %rcx,RIP(%rsp) je error_swapgs - movl %ebp,%ebp /* zero extend */ - cmpq %rbp,RIP(%rsp) + movl %ecx,%ecx /* zero extend */ + cmpq %rcx,RIP(%rsp) je error_swapgs cmpq $gs_change,RIP(%rsp) je error_swapgs -- cgit v1.2.3 From 9dbef285a359c9bf6f04f907bdfb9f35f37a8513 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 28 May 2008 13:07:40 +0200 Subject: avr32: Clean up time.c #includes Remove lots of unneeded #includes, add #include and sort alphabetically. Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/time.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index 00a9862380ff..abd954fb7ba0 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -7,21 +7,13 @@ */ #include #include -#include -#include +#include #include #include -#include -#include -#include -#include -#include -#include +#include +#include -#include #include -#include -#include #include -- cgit v1.2.3 From 5b72b52cab872396c93d808d7fa14017e9061430 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 14 Jan 2008 23:27:30 +0100 Subject: avr32: Kill unneeded #include from asm/mmu_context.h Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/mmu_context.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/asm-avr32/mmu_context.h b/include/asm-avr32/mmu_context.h index c37c391faef6..27ff23407100 100644 --- a/include/asm-avr32/mmu_context.h +++ b/include/asm-avr32/mmu_context.h @@ -13,7 +13,6 @@ #define __ASM_AVR32_MMU_CONTEXT_H #include -#include #include #include -- cgit v1.2.3 From d704fb0cc0cce474ac959adca6c3d1f606fcfa2a Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 14 Jan 2008 21:42:56 +0100 Subject: avr32: Kill special exception handler sections Kill the special exception handler sections .tlbx.ex.text, .tlbr.ex.text, tlbw.ex.text and .scall.text. Use .org instead to place the handlers at the required offsets from EVBA. Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/entry-avr32b.S | 9 +++++---- arch/avr32/kernel/vmlinux.lds.S | 8 -------- 2 files changed, 5 insertions(+), 12 deletions(-) diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S index 5f31702d6b1c..050c006a7f0c 100644 --- a/arch/avr32/kernel/entry-avr32b.S +++ b/arch/avr32/kernel/entry-avr32b.S @@ -83,22 +83,23 @@ exception_vectors: #define tlbmiss_save pushm r0-r3 #define tlbmiss_restore popm r0-r3 - .section .tlbx.ex.text,"ax",@progbits + .org 0x50 .global itlb_miss itlb_miss: tlbmiss_save rjmp tlb_miss_common - .section .tlbr.ex.text,"ax",@progbits + .org 0x60 dtlb_miss_read: tlbmiss_save rjmp tlb_miss_common - .section .tlbw.ex.text,"ax",@progbits + .org 0x70 dtlb_miss_write: tlbmiss_save .global tlb_miss_common + .align 2 tlb_miss_common: mfsr r0, SYSREG_TLBEAR mfsr r1, SYSREG_PTBR @@ -157,7 +158,7 @@ handle_vmalloc_miss: /* --- System Call --- */ - .section .scall.text,"ax",@progbits + .org 0x100 system_call: #ifdef CONFIG_PREEMPT mask_interrupts diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S index 481cfd40c053..033dd46bfa62 100644 --- a/arch/avr32/kernel/vmlinux.lds.S +++ b/arch/avr32/kernel/vmlinux.lds.S @@ -68,14 +68,6 @@ SECTIONS _evba = .; _text = .; *(.ex.text) - . = 0x50; - *(.tlbx.ex.text) - . = 0x60; - *(.tlbr.ex.text) - . = 0x70; - *(.tlbw.ex.text) - . = 0x100; - *(.scall.text) *(.irq.text) KPROBES_TEXT TEXT_TEXT -- cgit v1.2.3 From ad118c54a3587b2c69a769d0ba37d4d8dce4559d Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 27 Jun 2008 18:04:48 +0200 Subject: stacktrace: add saved stack traces to backtrace self-test This patch adds saved stack-traces to the backtrace suite of self-tests. Note that we don't depend on or unconditionally enable CONFIG_STACKTRACE because not all architectures may have it (and we still want to enable the other tests for those architectures). Cc: Arjan van de Ven Signed-off-by: Vegard Nossum Cc: Arjan van de Ven Cc: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/backtracetest.c | 30 +++++++++++++++++++++++++++++- lib/Kconfig.debug | 3 +++ 2 files changed, 32 insertions(+), 1 deletion(-) diff --git a/kernel/backtracetest.c b/kernel/backtracetest.c index d1a7605c5b8f..50f7abd0813d 100644 --- a/kernel/backtracetest.c +++ b/kernel/backtracetest.c @@ -10,9 +10,10 @@ * of the License. */ +#include #include #include -#include +#include static struct timer_list backtrace_timer; @@ -22,6 +23,31 @@ static void backtrace_test_timer(unsigned long data) printk("The following trace is a kernel self test and not a bug!\n"); dump_stack(); } + +#ifdef CONFIG_STACKTRACE +static void backtrace_test_saved(void) +{ + struct stack_trace trace; + unsigned long entries[8]; + + printk("Testing a saved backtrace.\n"); + printk("The following trace is a kernel self test and not a bug!\n"); + + trace.nr_entries = 0; + trace.max_entries = ARRAY_SIZE(entries); + trace.entries = entries; + trace.skip = 0; + + save_stack_trace(&trace); + print_stack_trace(&trace, 0); +} +#else +static void backtrace_test_saved(void) +{ + printk("Saved backtrace test skipped.\n"); +} +#endif + static int backtrace_regression_test(void) { printk("====[ backtrace testing ]===========\n"); @@ -29,6 +55,8 @@ static int backtrace_regression_test(void) printk("The following trace is a kernel self test and not a bug!\n"); dump_stack(); + backtrace_test_saved(); + init_timer(&backtrace_timer); backtrace_timer.function = backtrace_test_timer; mod_timer(&backtrace_timer, jiffies + 10); diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 9c17fb9d1d5e..6263e2d851f1 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -562,6 +562,9 @@ config BACKTRACE_SELF_TEST for distributions or general kernels, but only for kernel developers working on architecture code. + Note that if you want to also test saved backtraces, you will + have to enable STACKTRACE as well. + Say N if you are unsure. config LKDTM -- cgit v1.2.3 From 4e6a0535dd036377961027262aecb138099f925d Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 27 Jun 2008 18:06:54 +0200 Subject: backtrace: replace timer with tasklet + completions On qemu, the backtrace would show up _after_ the "end of backtrace testing" message. This patch changes it to use completions instead, which will guarantee that no such race exists. Cc: Arjan van de Ven Signed-off-by: Vegard Nossum Cc: Arjan van de Ven Cc: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/backtracetest.c | 37 ++++++++++++++++++++++++++----------- 1 file changed, 26 insertions(+), 11 deletions(-) diff --git a/kernel/backtracetest.c b/kernel/backtracetest.c index 50f7abd0813d..a5e026bc45c4 100644 --- a/kernel/backtracetest.c +++ b/kernel/backtracetest.c @@ -10,18 +10,39 @@ * of the License. */ +#include #include +#include #include #include #include -static struct timer_list backtrace_timer; +static void backtrace_test_normal(void) +{ + printk("Testing a backtrace from process context.\n"); + printk("The following trace is a kernel self test and not a bug!\n"); + + dump_stack(); +} + +static DECLARE_COMPLETION(backtrace_work); + +static void backtrace_test_irq_callback(unsigned long data) +{ + dump_stack(); + complete(&backtrace_work); +} + +static DECLARE_TASKLET(backtrace_tasklet, &backtrace_test_irq_callback, 0); -static void backtrace_test_timer(unsigned long data) +static void backtrace_test_irq(void) { printk("Testing a backtrace from irq context.\n"); printk("The following trace is a kernel self test and not a bug!\n"); - dump_stack(); + + init_completion(&backtrace_work); + tasklet_schedule(&backtrace_tasklet); + wait_for_completion(&backtrace_work); } #ifdef CONFIG_STACKTRACE @@ -51,17 +72,11 @@ static void backtrace_test_saved(void) static int backtrace_regression_test(void) { printk("====[ backtrace testing ]===========\n"); - printk("Testing a backtrace from process context.\n"); - printk("The following trace is a kernel self test and not a bug!\n"); - dump_stack(); + backtrace_test_normal(); + backtrace_test_irq(); backtrace_test_saved(); - init_timer(&backtrace_timer); - backtrace_timer.function = backtrace_test_timer; - mod_timer(&backtrace_timer, jiffies + 10); - - msleep(10); printk("====[ end of backtrace testing ]====\n"); return 0; } -- cgit v1.2.3 From 980dfcb93232907034a2c92d62d3a7d6ac7bef44 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Wed, 25 Jun 2008 21:27:00 +0200 Subject: rt2x00: Fix lock dependency errror This fixes a circular locking dependency in the workqueue handling. The interface work task uses the mac80211 function ieee80211_iterate_active_interfaces() which grabs the RTNL lock. However when the interface is brough down, this happens under the RTNL lock as well, this causes problems because mac80211 will flush the workqueue during the ifdown event. This causes mac80211 to wait until the driver has completed all work which can't finish because it is waiting on the RTNL lock. This is fixed by moving rt2x00 workqueue tasks on a different workqueue, this workqueue can be flushed when the ieee80211_hw structure is removed by the driver (when the driver is unloaded) which does not happen under the RTNL lock. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00.h | 1 + drivers/net/wireless/rt2x00/rt2x00dev.c | 38 ++++++++++++++++++++++----------- drivers/net/wireless/rt2x00/rt2x00mac.c | 4 ++-- 3 files changed, 28 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 611d98320593..b4bf1e09cf9a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -821,6 +821,7 @@ struct rt2x00_dev { /* * Scheduled work. */ + struct workqueue_struct *workqueue; struct work_struct intf_work; struct work_struct filter_work; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 2673d568bcac..c997d4f28ab3 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -75,7 +75,7 @@ static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) rt2x00lib_reset_link_tuner(rt2x00dev); - queue_delayed_work(rt2x00dev->hw->workqueue, + queue_delayed_work(rt2x00dev->workqueue, &rt2x00dev->link.work, LINK_TUNE_INTERVAL); } @@ -136,14 +136,6 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) if (!__test_and_clear_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) return; - /* - * Stop all scheduled work. - */ - if (work_pending(&rt2x00dev->intf_work)) - cancel_work_sync(&rt2x00dev->intf_work); - if (work_pending(&rt2x00dev->filter_work)) - cancel_work_sync(&rt2x00dev->filter_work); - /* * Stop the TX queues. */ @@ -398,8 +390,8 @@ static void rt2x00lib_link_tuner(struct work_struct *work) * Increase tuner counter, and reschedule the next link tuner run. */ rt2x00dev->link.count++; - queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work, - LINK_TUNE_INTERVAL); + queue_delayed_work(rt2x00dev->workqueue, + &rt2x00dev->link.work, LINK_TUNE_INTERVAL); } static void rt2x00lib_packetfilter_scheduled(struct work_struct *work) @@ -433,6 +425,15 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, spin_unlock(&intf->lock); + /* + * It is possible the radio was disabled while the work had been + * scheduled. If that happens we should return here immediately, + * note that in the spinlock protected area above the delayed_flags + * have been cleared correctly. + */ + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + if (delayed_flags & DELAYED_UPDATE_BEACON) { skb = ieee80211_beacon_get(rt2x00dev->hw, vif, &control); if (skb && rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, @@ -441,7 +442,7 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, } if (delayed_flags & DELAYED_CONFIG_ERP) - rt2x00lib_config_erp(rt2x00dev, intf, &intf->conf); + rt2x00lib_config_erp(rt2x00dev, intf, &conf); if (delayed_flags & DELAYED_LED_ASSOC) rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated); @@ -487,7 +488,7 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) rt2x00lib_beacondone_iter, rt2x00dev); - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); + queue_work(rt2x00dev->workqueue, &rt2x00dev->intf_work); } EXPORT_SYMBOL_GPL(rt2x00lib_beacondone); @@ -1130,6 +1131,10 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) /* * Initialize configuration work. */ + rt2x00dev->workqueue = create_singlethread_workqueue("rt2x00lib"); + if (!rt2x00dev->workqueue) + goto exit; + INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled); INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner); @@ -1189,6 +1194,13 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) rt2x00rfkill_free(rt2x00dev); rt2x00leds_unregister(rt2x00dev); + /* + * Stop all queued work. Note that most tasks will already be halted + * during rt2x00lib_disable_radio() and rt2x00lib_uninitialize(). + */ + flush_workqueue(rt2x00dev->workqueue); + destroy_workqueue(rt2x00dev->workqueue); + /* * Free ieee80211_hw memory. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 87e280a21971..9cb023edd2e9 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -428,7 +428,7 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags)) rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags); else - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work); + queue_work(rt2x00dev->workqueue, &rt2x00dev->filter_work); } EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter); @@ -509,7 +509,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, memcpy(&intf->conf, bss_conf, sizeof(*bss_conf)); if (delayed) { intf->delayed_flags |= delayed; - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); + queue_work(rt2x00dev->workqueue, &rt2x00dev->intf_work); } spin_unlock(&intf->lock); } -- cgit v1.2.3 From 5f4a6fae46a214c4dce3bd63a6219a5f1c818c78 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 25 Jun 2008 14:20:37 -0700 Subject: prism: islpci_eth.c endianness fix clock is already cpu-endian (see le32_to_cpu slightly before), so le64_to_cpu doesn't make much sense. Signed-off-by: Harvey Harrison Signed-off-by: John W. Linville --- drivers/net/wireless/prism54/islpci_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index 762e85bef55d..e43bae97ed8f 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -290,7 +290,7 @@ islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb) avs->version = cpu_to_be32(P80211CAPTURE_VERSION); avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header)); - avs->mactime = cpu_to_be64(le64_to_cpu(clock)); + avs->mactime = cpu_to_be64(clock); avs->hosttime = cpu_to_be64(jiffies); avs->phytype = cpu_to_be32(6); /*OFDM: 6 for (g), 8 for (a) */ avs->channel = cpu_to_be32(channel_of_freq(freq)); -- cgit v1.2.3 From 00eb7fe77eb455f807c396f9917f0f623d4c84bb Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 26 Jun 2008 12:13:46 +0300 Subject: mac80211: fix an oops in several failure paths in key allocation This patch fixes an oops in several failure paths in key allocation. This Oops occurs when freeing a key that has not been linked yet, so the key->sdata is not set. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/key.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 150d66dbda9d..220e83be3ef4 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -380,6 +380,15 @@ void ieee80211_key_free(struct ieee80211_key *key) if (!key) return; + if (!key->sdata) { + /* The key has not been linked yet, simply free it + * and don't Oops */ + if (key->conf.alg == ALG_CCMP) + ieee80211_aes_key_free(key->u.ccmp.tfm); + kfree(key); + return; + } + spin_lock_irqsave(&key->sdata->local->key_lock, flags); __ieee80211_key_free(key); spin_unlock_irqrestore(&key->sdata->local->key_lock, flags); -- cgit v1.2.3 From 0e3e2eabf4fbc0162e1f1eb4fd90cb3e9513a554 Mon Sep 17 00:00:00 2001 From: Richard Sharpe Date: Tue, 24 Jun 2008 19:11:13 -0700 Subject: firewire: fw-sbp2: fix parsing of logical unit directories MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is a small off-by-one bug in firewire-sbp2. This causes problems when a device exports multiple LUN Directories. I found it when trying to talk to a SONY DVD Jukebox. Signed-off-by: Richard Sharpe Acked-by: Kristian Høgsberg Signed-off-by: Stefan Richter (op. order, changelog) --- drivers/firewire/fw-sbp2.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index b2458bb8e9ca..227d2e036cd8 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -1051,7 +1051,8 @@ static int sbp2_scan_unit_dir(struct sbp2_target *tgt, u32 *directory, break; case SBP2_CSR_LOGICAL_UNIT_DIRECTORY: - if (sbp2_scan_logical_unit_dir(tgt, ci.p + value) < 0) + /* Adjust for the increment in the iterator */ + if (sbp2_scan_logical_unit_dir(tgt, ci.p - 1 + value) < 0) return -ENOMEM; break; } -- cgit v1.2.3 From c4635eb06af700820d658a163f06aff12e17cfb2 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Fri, 20 Jun 2008 12:07:08 +0900 Subject: pciehp: fix interrupt initialization Current pciehp driver's intialization sequence is as follows: (1) initialize controller data structure (2) install interrupt handler (3) enable software notification (4) initialize controller specific slot data structure (5) initialize generic slot data structure and register it to pci hotplug core The interrupt handler of pciehp assumes that controller specific slot data structure is already initialized. However, it is installed at (2) before initializing controller specific slot data structure at (4). Because of this, pciehp driver cannot handle the following cases properly. - If devices that shares IRQ with pciehp raise interrupts between (2) and (4). - If hotplug events (e.g. MRL open) happen between (3) and (4). We already have a workaround for this problem ("pciehp: fix NULL dereference in interrupt handler: dbd79aed1aea2bece0bf43cc2ff3b2f9baf48a08). But we still need fundamental fix. This patch fix the problem by changing the initilization sequence as follows: (1) initialize controller data structure (2) initialize controller specific slot data structure (3) install interrupt handler (4) enable software notification (5) initialize generic slot data structure and register it to pci hotplug core Signed-off-by: Kenji Kaneshige Acked-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp.h | 5 +- drivers/pci/hotplug/pciehp_core.c | 80 +++-------------- drivers/pci/hotplug/pciehp_hpc.c | 179 ++++++++++++++++++++++++-------------- 3 files changed, 128 insertions(+), 136 deletions(-) diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 8492fab800cc..d17233ae06f5 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -43,6 +43,7 @@ extern int pciehp_poll_mode; extern int pciehp_poll_time; extern int pciehp_debug; extern int pciehp_force; +extern int pciehp_slot_with_bus; extern struct workqueue_struct *pciehp_wq; #define dbg(format, arg...) \ @@ -156,10 +157,10 @@ extern u8 pciehp_handle_power_fault(struct slot *p_slot); extern int pciehp_configure_device(struct slot *p_slot); extern int pciehp_unconfigure_device(struct slot *p_slot); extern void pciehp_queue_pushbutton_work(struct work_struct *work); -int pcie_init(struct controller *ctrl, struct pcie_device *dev); +struct controller *pcie_init(struct pcie_device *dev); int pciehp_enable_slot(struct slot *p_slot); int pciehp_disable_slot(struct slot *p_slot); -int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev); +int pcie_enable_notification(struct controller *ctrl); static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device) { diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 7b21c86e4bff..d0fb56936911 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -41,7 +41,7 @@ int pciehp_debug; int pciehp_poll_mode; int pciehp_poll_time; int pciehp_force; -static int pciehp_slot_with_bus; +int pciehp_slot_with_bus; struct workqueue_struct *pciehp_wq; #define DRIVER_VERSION "0.4" @@ -183,23 +183,10 @@ static struct hotplug_slot_attribute hotplug_slot_attr_lock = { */ static void release_slot(struct hotplug_slot *hotplug_slot) { - struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); - kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot); - kfree(slot); -} - -static void make_slot_name(struct slot *slot) -{ - if (pciehp_slot_with_bus) - snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d", - slot->bus, slot->number); - else - snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d", - slot->number); + kfree(hotplug_slot->info); + kfree(hotplug_slot); } static int init_slots(struct controller *ctrl) @@ -208,44 +195,27 @@ static int init_slots(struct controller *ctrl) struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *info; int retval = -ENOMEM; - int i; - - for (i = 0; i < ctrl->num_slots; i++) { - slot = kzalloc(sizeof(*slot), GFP_KERNEL); - if (!slot) - goto error; + list_for_each_entry(slot, &ctrl->slot_list, slot_list) { hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL); if (!hotplug_slot) - goto error_slot; - slot->hotplug_slot = hotplug_slot; + goto error; info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) goto error_hpslot; - hotplug_slot->info = info; - - hotplug_slot->name = slot->name; - - slot->hp_slot = i; - slot->ctrl = ctrl; - slot->bus = ctrl->pci_dev->subordinate->number; - slot->device = ctrl->slot_device_offset + i; - slot->hpc_ops = ctrl->hpc_ops; - slot->number = ctrl->first_slot; - mutex_init(&slot->lock); - INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); /* register this slot with the hotplug pci core */ + hotplug_slot->info = info; + hotplug_slot->name = slot->name; hotplug_slot->private = slot; hotplug_slot->release = &release_slot; - make_slot_name(slot); hotplug_slot->ops = &pciehp_hotplug_slot_ops; - get_power_status(hotplug_slot, &info->power_status); get_attention_status(hotplug_slot, &info->attention_status); get_latch_status(hotplug_slot, &info->latch_status); get_adapter_status(hotplug_slot, &info->adapter_status); + slot->hotplug_slot = hotplug_slot; dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x " "slot_device_offset=%x\n", slot->bus, slot->device, @@ -271,8 +241,6 @@ static int init_slots(struct controller *ctrl) goto error_info; } } - - list_add(&slot->slot_list, &ctrl->slot_list); } return 0; @@ -280,27 +248,18 @@ error_info: kfree(info); error_hpslot: kfree(hotplug_slot); -error_slot: - kfree(slot); error: return retval; } static void cleanup_slots(struct controller *ctrl) { - struct list_head *tmp; - struct list_head *next; struct slot *slot; - list_for_each_safe(tmp, next, &ctrl->slot_list) { - slot = list_entry(tmp, struct slot, slot_list); - list_del(&slot->slot_list); + list_for_each_entry(slot, &ctrl->slot_list, slot_list) { if (EMI(ctrl)) sysfs_remove_file(&slot->hotplug_slot->pci_slot->kobj, &hotplug_slot_attr_lock.attr); - cancel_delayed_work(&slot->work); - flush_scheduled_work(); - flush_workqueue(pciehp_wq); pci_hp_deregister(slot->hotplug_slot); } } @@ -441,25 +400,13 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ else if (pciehp_get_hp_hw_control_from_firmware(pdev)) goto err_out_none; - ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); + ctrl = pcie_init(dev); if (!ctrl) { - err("%s : out of memory\n", __func__); - goto err_out_none; - } - INIT_LIST_HEAD(&ctrl->slot_list); - - rc = pcie_init(ctrl, dev); - if (rc) { dbg("%s: controller initialization failed\n", PCIE_MODULE_NAME); - goto err_out_free_ctrl; + goto err_out_none; } - pci_set_drvdata(pdev, ctrl); - dbg("%s: ctrl bus=0x%x, device=%x, function=%x, irq=%x\n", - __func__, pdev->bus->number, PCI_SLOT(pdev->devfn), - PCI_FUNC(pdev->devfn), pdev->irq); - /* Setup the slot information structures */ rc = init_slots(ctrl); if (rc) { @@ -492,8 +439,6 @@ err_out_free_ctrl_slot: cleanup_slots(ctrl); err_out_release_ctlr: ctrl->hpc_ops->release_ctlr(ctrl); -err_out_free_ctrl: - kfree(ctrl); err_out_none: return -ENODEV; } @@ -505,7 +450,6 @@ static void pciehp_remove (struct pcie_device *dev) cleanup_slots(ctrl); ctrl->hpc_ops->release_ctlr(ctrl); - kfree(ctrl); } #ifdef CONFIG_PM @@ -525,7 +469,7 @@ static int pciehp_resume (struct pcie_device *dev) u8 status; /* reinitialize the chipset's event detection logic */ - pcie_init_hardware_part2(ctrl, dev); + pcie_enable_notification(ctrl); t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 59c28093d291..1ce52437e1ed 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -609,23 +609,6 @@ static void hpc_set_green_led_blink(struct slot *slot) __func__, ctrl->cap_base + SLOTCTRL, slot_cmd); } -static void hpc_release_ctlr(struct controller *ctrl) -{ - /* Mask Hot-plug Interrupt Enable */ - if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) - err("%s: Cannot mask hotplug interrupt enable\n", __func__); - - /* Free interrupt handler or interrupt polling timer */ - pciehp_free_irq(ctrl); - - /* - * If this is the last controller to be released, destroy the - * pciehp work queue - */ - if (atomic_dec_and_test(&pciehp_num_controllers)) - destroy_workqueue(pciehp_wq); -} - static int hpc_power_on_slot(struct slot * slot) { struct controller *ctrl = slot->ctrl; @@ -798,19 +781,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) if (!(intr_loc & ~CMD_COMPLETED)) return IRQ_HANDLED; - /* - * Return without handling events if this handler routine is - * called before controller initialization is done. This may - * happen if hotplug event or another interrupt that shares - * the IRQ with pciehp arrives before slot initialization is - * done after interrupt handler is registered. - * - * FIXME - Need more structural fixes. We need to be ready to - * handle the event before installing interrupt handler. - */ p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); - if (!p_slot || !p_slot->hpc_ops) - return IRQ_HANDLED; /* Check MRL Sensor Changed */ if (intr_loc & MRL_SENS_CHANGED) @@ -987,6 +958,7 @@ static int hpc_get_cur_lnk_width(struct slot *slot, return retval; } +static void pcie_release_ctrl(struct controller *ctrl); static struct hpc_ops pciehp_hpc_ops = { .power_on_slot = hpc_power_on_slot, .power_off_slot = hpc_power_off_slot, @@ -1008,28 +980,11 @@ static struct hpc_ops pciehp_hpc_ops = { .green_led_off = hpc_set_green_led_off, .green_led_blink = hpc_set_green_led_blink, - .release_ctlr = hpc_release_ctlr, + .release_ctlr = pcie_release_ctrl, .check_lnk_status = hpc_check_lnk_status, }; -static int pcie_init_hardware_part1(struct controller *ctrl, - struct pcie_device *dev) -{ - /* Clear all remaining event bits in Slot Status register */ - if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) { - err("%s: Cannot write to SLOTSTATUS register\n", __func__); - return -1; - } - - /* Mask Hot-plug Interrupt Enable */ - if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) { - err("%s: Cannot mask hotplug interrupt enable\n", __func__); - return -1; - } - return 0; -} - -int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev) +int pcie_enable_notification(struct controller *ctrl) { u16 cmd, mask; @@ -1050,10 +1005,76 @@ int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev) err("%s: Cannot enable software notification\n", __func__); return -1; } + return 0; +} + +static void pcie_disable_notification(struct controller *ctrl) +{ + u16 mask; + mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE | + PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; + if (pcie_write_cmd(ctrl, 0, mask)) + warn("%s: Cannot disable software notification\n", __func__); +} + +static int pcie_init_notification(struct controller *ctrl) +{ + if (pciehp_request_irq(ctrl)) + return -1; + if (pcie_enable_notification(ctrl)) { + pciehp_free_irq(ctrl); + return -1; + } + return 0; +} + +static void pcie_shutdown_notification(struct controller *ctrl) +{ + pcie_disable_notification(ctrl); + pciehp_free_irq(ctrl); +} + +static void make_slot_name(struct slot *slot) +{ + if (pciehp_slot_with_bus) + snprintf(slot->name, SLOT_NAME_SIZE, "%04d_%04d", + slot->bus, slot->number); + else + snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number); +} +static int pcie_init_slot(struct controller *ctrl) +{ + struct slot *slot; + + slot = kzalloc(sizeof(*slot), GFP_KERNEL); + if (!slot) + return -ENOMEM; + + slot->hp_slot = 0; + slot->ctrl = ctrl; + slot->bus = ctrl->pci_dev->subordinate->number; + slot->device = ctrl->slot_device_offset + slot->hp_slot; + slot->hpc_ops = ctrl->hpc_ops; + slot->number = ctrl->first_slot; + make_slot_name(slot); + mutex_init(&slot->lock); + INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); + list_add(&slot->slot_list, &ctrl->slot_list); return 0; } +static void pcie_cleanup_slot(struct controller *ctrl) +{ + struct slot *slot; + slot = list_first_entry(&ctrl->slot_list, struct slot, slot_list); + list_del(&slot->slot_list); + cancel_delayed_work(&slot->work); + flush_scheduled_work(); + flush_workqueue(pciehp_wq); + kfree(slot); +} + static inline void dbg_ctrl(struct controller *ctrl) { int i; @@ -1093,11 +1114,19 @@ static inline void dbg_ctrl(struct controller *ctrl) dbg("Slot Control : 0x%04x\n", reg16); } -int pcie_init(struct controller *ctrl, struct pcie_device *dev) +struct controller *pcie_init(struct pcie_device *dev) { + struct controller *ctrl; u32 slot_cap; struct pci_dev *pdev = dev->port; + ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); + if (!ctrl) { + err("%s : out of memory\n", __func__); + goto abort; + } + INIT_LIST_HEAD(&ctrl->slot_list); + ctrl->pci_dev = pdev; ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP); if (!ctrl->cap_base) { @@ -1128,15 +1157,12 @@ int pcie_init(struct controller *ctrl, struct pcie_device *dev) !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl))) ctrl->no_cmd_complete = 1; - info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", - pdev->vendor, pdev->device, - pdev->subsystem_vendor, pdev->subsystem_device); + /* Clear all remaining event bits in Slot Status register */ + if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) + goto abort_ctrl; - if (pcie_init_hardware_part1(ctrl, dev)) - goto abort; - - if (pciehp_request_irq(ctrl)) - goto abort; + /* Disable sotfware notification */ + pcie_disable_notification(ctrl); /* * If this is the first controller to be initialized, @@ -1144,18 +1170,39 @@ int pcie_init(struct controller *ctrl, struct pcie_device *dev) */ if (atomic_add_return(1, &pciehp_num_controllers) == 1) { pciehp_wq = create_singlethread_workqueue("pciehpd"); - if (!pciehp_wq) { - goto abort_free_irq; - } + if (!pciehp_wq) + goto abort_ctrl; } - if (pcie_init_hardware_part2(ctrl, dev)) - goto abort_free_irq; + info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", + pdev->vendor, pdev->device, + pdev->subsystem_vendor, pdev->subsystem_device); + + if (pcie_init_slot(ctrl)) + goto abort_ctrl; - return 0; + if (pcie_init_notification(ctrl)) + goto abort_slot; -abort_free_irq: - pciehp_free_irq(ctrl); + return ctrl; + +abort_slot: + pcie_cleanup_slot(ctrl); +abort_ctrl: + kfree(ctrl); abort: - return -1; + return NULL; +} + +void pcie_release_ctrl(struct controller *ctrl) +{ + pcie_shutdown_notification(ctrl); + pcie_cleanup_slot(ctrl); + /* + * If this is the last controller to be released, destroy the + * pciehp work queue + */ + if (atomic_dec_and_test(&pciehp_num_controllers)) + destroy_workqueue(pciehp_wq); + kfree(ctrl); } -- cgit v1.2.3 From 3aa50c44628629a6d58f93e0a1244e95a874884e Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 26 Jun 2008 20:07:33 +0900 Subject: pciehp: remove needless command completed interrupt setting Currently, pciehp driver enables command completed interrupt as follows. (1) Don't enable at initialization. (2) Enable command completed interrupt whenever pciehp issues a command, if the command doesn't attempt to disable the interrupt. (3) Disable command completed interrupt at driver unloading. Once we enable command completed interrupt, we don't need to re-enable it for every command. So we can simplify above steps as follows: (1) Enable command completed interrupt at initialization. (2) No special sequence for command completed interrupt. (3) Disable command completed interrupt at driver unloading. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_hpc.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 1ce52437e1ed..1323a43285d7 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -337,10 +337,6 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) slot_ctrl &= ~mask; slot_ctrl |= (cmd & mask); - /* Don't enable command completed if caller is changing it. */ - if (!(mask & CMD_CMPL_INTR_ENABLE)) - slot_ctrl |= CMD_CMPL_INTR_ENABLE; - ctrl->cmd_busy = 1; smp_mb(); retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl); @@ -996,10 +992,10 @@ int pcie_enable_notification(struct controller *ctrl) if (MRL_SENS(ctrl)) cmd |= MRL_DETECT_ENABLE; if (!pciehp_poll_mode) - cmd |= HP_INTR_ENABLE; + cmd |= HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; - mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | - PWR_FAULT_DETECT_ENABLE | MRL_DETECT_ENABLE | HP_INTR_ENABLE; + mask = PRSN_DETECT_ENABLE | ATTN_BUTTN_ENABLE | MRL_DETECT_ENABLE | + PWR_FAULT_DETECT_ENABLE | HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE; if (pcie_write_cmd(ctrl, cmd, mask)) { err("%s: Cannot enable software notification\n", __func__); -- cgit v1.2.3 From b97089400d44b9e90ce5029a2e458cd087473c74 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Thu, 26 Jun 2008 20:06:24 +0900 Subject: pciehp: use get_service_data Current pciehp driver saves its private data pointer into pci_dev structure using pci_set_drvdata()/pci_get_drvdata(). But because pciehp is not a pci device driver but a PCI Express service driver, it should save its private data pointer into pcie_device structure using set_service_data()/get_service_data(). Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp_core.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index d0fb56936911..3677495c4f91 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -405,7 +405,7 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ dbg("%s: controller initialization failed\n", PCIE_MODULE_NAME); goto err_out_none; } - pci_set_drvdata(pdev, ctrl); + set_service_data(dev, ctrl); /* Setup the slot information structures */ rc = init_slots(ctrl); @@ -445,8 +445,7 @@ err_out_none: static void pciehp_remove (struct pcie_device *dev) { - struct pci_dev *pdev = dev->port; - struct controller *ctrl = pci_get_drvdata(pdev); + struct controller *ctrl = get_service_data(dev); cleanup_slots(ctrl); ctrl->hpc_ops->release_ctlr(ctrl); @@ -463,8 +462,7 @@ static int pciehp_resume (struct pcie_device *dev) { printk("%s ENTRY\n", __func__); if (pciehp_force) { - struct pci_dev *pdev = dev->port; - struct controller *ctrl = pci_get_drvdata(pdev); + struct controller *ctrl = get_service_data(dev); struct slot *t_slot; u8 status; -- cgit v1.2.3 From 9433f6dd3a4677e9b92c6e1cd7f98b11598b7c2c Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 26 Jun 2008 10:50:04 +0800 Subject: PCI: Fix comment of pci_dynids struct pci_driver has no field of driver_data. It's in pci_device_id. Signed-off-by: Wang Chen Signed-off-by: Jesse Barnes --- include/linux/pci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/pci.h b/include/linux/pci.h index f1f73f79a180..76c9a4a96152 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -338,7 +338,7 @@ struct pci_bus_region { struct pci_dynids { spinlock_t lock; /* protects list, index */ struct list_head list; /* for IDs added at runtime */ - unsigned int use_driver_data:1; /* pci_driver->driver_data is used */ + unsigned int use_driver_data:1; /* pci_device_id->driver_data is used */ }; /* ---------------------------------------------------------------- */ -- cgit v1.2.3 From 8b285ce84bbc719e363a796f466404576b840d36 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 27 Jun 2008 13:23:20 +0100 Subject: PCI: fix pci_setup_device()'s sprinting into a const buffer Make pci_setup_device() write the bus ID directly into the allotted storage, rather than using pci_name() as the address as that now returns a const pointer. Signed-off-by: David Howells Signed-off-by: Jesse Barnes --- drivers/pci/probe.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index f8291191ef91..0420fd8027b6 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -713,8 +713,9 @@ static int pci_setup_device(struct pci_dev * dev) { u32 class; - sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus), - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + snprintf(dev->dev.bus_id, BUS_ID_SIZE, + "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus), + dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); dev->revision = class & 0xff; -- cgit v1.2.3 From 0aea531326d1a17ccef7d9a538429c5b32cf4f12 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 18 Jun 2008 01:33:32 +0300 Subject: PCI: remove unused arch pcibios_update_resource() functions Russell King did the following back in 2003: <-- snip --> [PCI] pci-9: Kill per-architecture pcibios_update_resource() Kill pcibios_update_resource(), replacing it with pci_update_resource(). pci_update_resource() uses pcibios_resource_to_bus() to convert a resource to a device BAR - the transformation should be exactly the same as the transformation used for the PCI bridges. pci_update_resource "knows" about 64-bit BARs, but doesn't attempt to set the high 32-bits to anything non-zero - currently no architecture attempts to do something different. If anyone cares, please fix; I'm going to reflect current behaviour for the time being. Ivan pointed out the following architectures need to examine their pcibios_update_resource() implementation - they should make sure that this new implementation does the right thing. #warning's have been added where appropriate. ia64 mips mips64 This cset also includes a fix for the problem reported by AKPM where 64-bit arch compilers complain about the resource mask being placed in a u32. <-- snip --> This patch removes the unused pcibios_update_resource() functions the kernel gained since, from FRV, m68k, mips & sh architectures. Signed-off-by: Adrian Bunk Acked-by: David Howells Acked-by: Greg Ungerer Acked-by: Paul Mundt Acked-by: Ralf Baechle Signed-off-by: Jesse Barnes --- arch/frv/mb93090-mb00/pci-frv.c | 30 ------------------------------ arch/m68knommu/kernel/comempci.c | 9 --------- arch/mips/pmc-sierra/yosemite/ht.c | 36 ------------------------------------ arch/sh/drivers/pci/pci.c | 32 -------------------------------- 4 files changed, 107 deletions(-) diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c index 4f165c93be42..edae117fcc2b 100644 --- a/arch/frv/mb93090-mb00/pci-frv.c +++ b/arch/frv/mb93090-mb00/pci-frv.c @@ -19,36 +19,6 @@ #include "pci-frv.h" -#if 0 -void -pcibios_update_resource(struct pci_dev *dev, struct resource *root, - struct resource *res, int resource) -{ - u32 new, check; - int reg; - - new = res->start | (res->flags & PCI_REGION_FLAG_MASK); - if (resource < 6) { - reg = PCI_BASE_ADDRESS_0 + 4*resource; - } else if (resource == PCI_ROM_RESOURCE) { - res->flags |= IORESOURCE_ROM_ENABLE; - new |= PCI_ROM_ADDRESS_ENABLE; - reg = dev->rom_base_reg; - } else { - /* Somebody might have asked allocation of a non-standard resource */ - return; - } - - pci_write_config_dword(dev, reg, new); - pci_read_config_dword(dev, reg, &check); - if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) { - printk(KERN_ERR "PCI: Error while updating region " - "%s/%d (%08x != %08x)\n", pci_name(dev), resource, - new, check); - } -} -#endif - /* * We need to avoid collisions with `mirrored' VGA ports * and other strange ISA hardware, so we always want the diff --git a/arch/m68knommu/kernel/comempci.c b/arch/m68knommu/kernel/comempci.c index 6ee00effbad2..0a68b5a85f86 100644 --- a/arch/m68knommu/kernel/comempci.c +++ b/arch/m68knommu/kernel/comempci.c @@ -373,15 +373,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return(0); } -/*****************************************************************************/ - -void pcibios_update_resource(struct pci_dev *dev, struct resource *root, struct resource *r, int resource) -{ - printk(KERN_WARNING "%s(%d): no support for changing PCI resources...\n", - __FILE__, __LINE__); -} - - /*****************************************************************************/ /* diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c index 6380662bbf3c..678388fd34b1 100644 --- a/arch/mips/pmc-sierra/yosemite/ht.c +++ b/arch/mips/pmc-sierra/yosemite/ht.c @@ -345,42 +345,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) return pcibios_enable_resources(dev); } - - -void pcibios_update_resource(struct pci_dev *dev, struct resource *root, - struct resource *res, int resource) -{ - u32 new, check; - int reg; - - return; - - new = res->start | (res->flags & PCI_REGION_FLAG_MASK); - if (resource < 6) { - reg = PCI_BASE_ADDRESS_0 + 4 * resource; - } else if (resource == PCI_ROM_RESOURCE) { - res->flags |= IORESOURCE_ROM_ENABLE; - reg = dev->rom_base_reg; - } else { - /* - * Somebody might have asked allocation of a non-standard - * resource - */ - return; - } - - pci_write_config_dword(dev, reg, new); - pci_read_config_dword(dev, reg, &check); - if ((new ^ check) & - ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : - PCI_BASE_ADDRESS_MEM_MASK)) { - printk(KERN_ERR "PCI: Error while updating region " - "%s/%d (%08x != %08x)\n", pci_name(dev), resource, - new, check); - } -} - - void pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) { diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 08d2e7325252..f57095a2617c 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -76,38 +76,6 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) pci_read_bridge_bases(bus); } -void -pcibios_update_resource(struct pci_dev *dev, struct resource *root, - struct resource *res, int resource) -{ - u32 new, check; - int reg; - - new = res->start | (res->flags & PCI_REGION_FLAG_MASK); - if (resource < 6) { - reg = PCI_BASE_ADDRESS_0 + 4*resource; - } else if (resource == PCI_ROM_RESOURCE) { - res->flags |= IORESOURCE_ROM_ENABLE; - new |= PCI_ROM_ADDRESS_ENABLE; - reg = dev->rom_base_reg; - } else { - /* - * Somebody might have asked allocation of a non-standard - * resource - */ - return; - } - - pci_write_config_dword(dev, reg, new); - pci_read_config_dword(dev, reg, &check); - if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? - PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) { - printk(KERN_ERR "PCI: Error while updating region " - "%s/%d (%08x != %08x)\n", pci_name(dev), resource, - new, check); - } -} - void pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) __attribute__ ((weak)); -- cgit v1.2.3 From aa60d13fb04f6d5ce72e4da508a4048b934ebd24 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Fri, 27 Jun 2008 13:23:00 -0700 Subject: x86: setup: issue a null command after enabling A20 via KBC Apparently, DOS and possibly other legacy operating systems issued a null command to the keyboard controller after toggling A20, specifically "pulse output pins" with no output pins specified. This was presumably done for synchronization reasons. This has made it into at least the UHCI spec, and it has been found to cause compatibility problems when "legacy USB" is enabled (which it almost always is) to not have this byte sent. It is *NOT* clear if any of these compatibility problems has any effect on Linux. However, for maximum compatibility, issue this null command after togging A20 through the KBC. Signed-off-by: H. Peter Anvin --- arch/x86/boot/a20.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/boot/a20.c b/arch/x86/boot/a20.c index 90943f83e84d..ef6e142a6b40 100644 --- a/arch/x86/boot/a20.c +++ b/arch/x86/boot/a20.c @@ -1,7 +1,7 @@ /* -*- linux-c -*- ------------------------------------------------------- * * * Copyright (C) 1991, 1992 Linus Torvalds - * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2007-2008 rPath, Inc. - All Rights Reserved * * This file is part of the Linux kernel, and is made available under * the terms of the GNU General Public License version 2. @@ -95,6 +95,9 @@ static void enable_a20_kbc(void) outb(0xdf, 0x60); /* A20 on */ empty_8042(); + + outb(0xff, 0x64); /* Null command, but UHCI wants it */ + empty_8042(); } static void enable_a20_fast(void) -- cgit v1.2.3 From dee805532a30183c4462305b4614e58bd83a7bc1 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 27 Jun 2008 13:45:19 -0500 Subject: powerpc: Add dma nodes to 83xx, 85xx and 86xx boards Added DMA nodes for the elo/elo-plus DMA engines. Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that its the same as all the other boards. Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/asp834x-redboot.dts | 35 +++++++++++++ arch/powerpc/boot/dts/ksi8560.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/mpc8313erdb.dts | 35 +++++++++++++ arch/powerpc/boot/dts/mpc8315erdb.dts | 35 +++++++++++++ arch/powerpc/boot/dts/mpc832x_mds.dts | 35 +++++++++++++ arch/powerpc/boot/dts/mpc832x_rdb.dts | 71 +++++++++++++++++++------- arch/powerpc/boot/dts/mpc8349emitx.dts | 35 +++++++++++++ arch/powerpc/boot/dts/mpc8349emitxgp.dts | 35 +++++++++++++ arch/powerpc/boot/dts/mpc834x_mds.dts | 35 +++++++++++++ arch/powerpc/boot/dts/mpc836x_mds.dts | 35 +++++++++++++ arch/powerpc/boot/dts/mpc836x_rdk.dts | 35 +++++++++++++ arch/powerpc/boot/dts/mpc8377_mds.dts | 70 ++++++++++++------------- arch/powerpc/boot/dts/mpc8377_rdb.dts | 35 +++++++++++++ arch/powerpc/boot/dts/mpc8378_mds.dts | 35 +++++++++++++ arch/powerpc/boot/dts/mpc8378_rdb.dts | 35 +++++++++++++ arch/powerpc/boot/dts/mpc8379_mds.dts | 35 +++++++++++++ arch/powerpc/boot/dts/mpc8379_rdb.dts | 35 +++++++++++++ arch/powerpc/boot/dts/mpc8540ads.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/mpc8541cds.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/mpc8548cds.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/mpc8555cds.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/mpc8560ads.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/mpc8568mds.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/mpc8572ds.dts | 82 ++++++++++++++++++++++++++++++ arch/powerpc/boot/dts/mpc8641_hpcn.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/sbc8349.dts | 35 +++++++++++++ arch/powerpc/boot/dts/sbc8548.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/sbc8560.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/sbc8641d.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/stx_gp3_8560.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/tqm8540.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/tqm8541.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/tqm8548-bigflash.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/tqm8548.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/tqm8555.dts | 41 +++++++++++++++ arch/powerpc/boot/dts/tqm8560.dts | 41 +++++++++++++++ 36 files changed, 1433 insertions(+), 53 deletions(-) diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts index 972cf78fff65..8b1bb0e41905 100644 --- a/arch/powerpc/boot/dts/asp834x-redboot.dts +++ b/arch/powerpc/boot/dts/asp834x-redboot.dts @@ -118,6 +118,41 @@ mode = "cpu"; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8347-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + /* phy type (ULPI or SERIAL) are only types supported for MPH */ /* port = 0 or 1 */ usb@22000 { diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts index 6eb7c771f6a4..fd5804398417 100644 --- a/arch/powerpc/boot/dts/ksi8560.dts +++ b/arch/powerpc/boot/dts/ksi8560.dts @@ -83,6 +83,47 @@ dfsrr; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { /* For TSECs */ #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index e1f0dca8ac39..b2068430a06d 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -144,6 +144,41 @@ mode = "cpu"; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8313-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ usb@23000 { compatible = "fsl-usb2-dr"; diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index d7a1ececa30f..a40e8064d429 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -132,6 +132,41 @@ mode = "cpu"; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8315-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 539e02fb3526..b5968b6c8a29 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -114,6 +114,41 @@ interrupt-parent = <&ipic>; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8323-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + crypto@30000 { device_type = "crypto"; model = "SEC2"; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 179c81c6a7ac..a798d8639a7d 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -68,7 +68,7 @@ compatible = "fsl-i2c"; reg = <0x3000 0x100>; interrupts = <14 0x8>; - interrupt-parent = <&pic>; + interrupt-parent = <&ipic>; dfsrr; }; @@ -79,7 +79,7 @@ reg = <0x4500 0x100>; clock-frequency = <0>; interrupts = <9 0x8>; - interrupt-parent = <&pic>; + interrupt-parent = <&ipic>; }; serial1: serial@4600 { @@ -89,7 +89,42 @@ reg = <0x4600 0x100>; clock-frequency = <0>; interrupts = <10 0x8>; - interrupt-parent = <&pic>; + interrupt-parent = <&ipic>; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8323-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; }; crypto@30000 { @@ -98,7 +133,7 @@ compatible = "talitos"; reg = <0x30000 0x7000>; interrupts = <11 0x8>; - interrupt-parent = <&pic>; + interrupt-parent = <&ipic>; /* Rev. 2.2 */ num-channels = <1>; channel-fifo-len = <24>; @@ -106,7 +141,7 @@ descriptor-types-mask = <0x0122003f>; }; - pic:pic@700 { + ipic:pic@700 { interrupt-controller; #address-cells = <0>; #interrupt-cells = <2>; @@ -240,13 +275,13 @@ compatible = "fsl,ucc-mdio"; phy00:ethernet-phy@00 { - interrupt-parent = <&pic>; + interrupt-parent = <&ipic>; interrupts = <0>; reg = <0x0>; device_type = "ethernet-phy"; }; phy04:ethernet-phy@04 { - interrupt-parent = <&pic>; + interrupt-parent = <&ipic>; interrupts = <0>; reg = <0x4>; device_type = "ethernet-phy"; @@ -261,7 +296,7 @@ reg = <0x80 0x80>; big-endian; interrupts = <32 0x8 33 0x8>; //high:32 low:33 - interrupt-parent = <&pic>; + interrupt-parent = <&ipic>; }; }; @@ -270,21 +305,21 @@ interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x10 AD16 (USB) */ - 0x8000 0x0 0x0 0x1 &pic 17 0x8 + 0x8000 0x0 0x0 0x1 &ipic 17 0x8 /* IDSEL 0x11 AD17 (Mini1)*/ - 0x8800 0x0 0x0 0x1 &pic 18 0x8 - 0x8800 0x0 0x0 0x2 &pic 19 0x8 - 0x8800 0x0 0x0 0x3 &pic 20 0x8 - 0x8800 0x0 0x0 0x4 &pic 48 0x8 + 0x8800 0x0 0x0 0x1 &ipic 18 0x8 + 0x8800 0x0 0x0 0x2 &ipic 19 0x8 + 0x8800 0x0 0x0 0x3 &ipic 20 0x8 + 0x8800 0x0 0x0 0x4 &ipic 48 0x8 /* IDSEL 0x12 AD18 (PCI/Mini2) */ - 0x9000 0x0 0x0 0x1 &pic 19 0x8 - 0x9000 0x0 0x0 0x2 &pic 20 0x8 - 0x9000 0x0 0x0 0x3 &pic 48 0x8 - 0x9000 0x0 0x0 0x4 &pic 17 0x8>; + 0x9000 0x0 0x0 0x1 &ipic 19 0x8 + 0x9000 0x0 0x0 0x2 &ipic 20 0x8 + 0x9000 0x0 0x0 0x3 &ipic 48 0x8 + 0x9000 0x0 0x0 0x4 &ipic 17 0x8>; - interrupt-parent = <&pic>; + interrupt-parent = <&ipic>; interrupts = <66 0x8>; bus-range = <0x0 0x0>; ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 9426676b0b7d..fc0f4c918c76 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -93,6 +93,41 @@ mode = "cpu"; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + usb@22000 { compatible = "fsl-usb2-mph"; reg = <0x22000 0x1000>; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index f81d735e6e72..e6afb1d1e19e 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -91,6 +91,41 @@ mode = "cpu"; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index 0199c5c548d8..9c75c7c69e21 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -103,6 +103,41 @@ mode = "cpu"; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + /* phy type (ULPI or SERIAL) are only types supported for MPH */ /* port = 0 or 1 */ usb@22000 { diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 8160ff24e87e..8e33b155f112 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -118,6 +118,41 @@ interrupt-parent = <&ipic>; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + crypto@30000 { device_type = "crypto"; model = "SEC2"; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index 3402d267a869..8acd1d6577f2 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -113,6 +113,41 @@ clock-frequency = <0>; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + crypto@30000 { compatible = "fsl,sec2-crypto"; reg = <0x30000 0x10000>; diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index fea592574004..49a38cb95b52 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -233,41 +233,6 @@ interrupt-parent = <&ipic>; }; - crypto@30000 { - model = "SEC3"; - compatible = "talitos"; - reg = <0x30000 0x10000>; - interrupts = <11 0x8>; - interrupt-parent = <&ipic>; - /* Rev. 3.0 geometry */ - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x000001fe>; - descriptor-types-mask = <0x03ab0ebf>; - }; - - sdhc@2e000 { - model = "eSDHC"; - compatible = "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <42 0x8>; - interrupt-parent = <&ipic>; - }; - - sata@18000 { - compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; - reg = <0x18000 0x1000>; - interrupts = <44 0x8>; - interrupt-parent = <&ipic>; - }; - - sata@19000 { - compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; - reg = <0x19000 0x1000>; - interrupts = <45 0x8>; - interrupt-parent = <&ipic>; - }; - dma@82a8 { #address-cells = <1>; #size-cells = <1>; @@ -303,6 +268,41 @@ }; }; + crypto@30000 { + model = "SEC3"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <24>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sdhc@2e000 { + model = "eSDHC"; + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@18000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@19000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + }; + /* IPIC * interrupts cell = * sense values match linux IORESOURCE_IRQ_* defines: diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 5bc09ad016f5..e05743ad7b3f 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -143,6 +143,41 @@ mode = "cpu"; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 1d6ea080ad73..99ad49d4f13f 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -157,6 +157,41 @@ mode = "cpu"; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8378-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 711f9a30f9ab..a8bdbaa975c9 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -143,6 +143,41 @@ mode = "cpu"; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8378-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index 6f78a9fd9826..980be8136276 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -157,6 +157,41 @@ mode = "cpu"; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8379-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index c11ceb7d3299..9d636e39f23f 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -143,6 +143,41 @@ mode = "cpu"; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8379-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + usb@23000 { compatible = "fsl-usb2-dr"; reg = <0x23000 0x1000>; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 79881a1fb8aa..f2273a872b11 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -84,6 +84,47 @@ dfsrr; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 66192aa0f311..21ad71b825c1 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -84,6 +84,47 @@ dfsrr; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 205598d51f25..621388db3c9e 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -100,6 +100,47 @@ dfsrr; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 7c9d0b16d7e5..6fc8059b5a01 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -84,6 +84,47 @@ dfsrr; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 5d9f3c4b5b71..ba8159de040b 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -73,6 +73,47 @@ interrupts = <16 2>; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index d7af8db1a22f..be9a289c0d62 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -107,6 +107,47 @@ dfsrr; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8568-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8568-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8568-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8568-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index a444e6a2387d..cb06325f0b79 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -117,6 +117,88 @@ dfsrr; }; + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 14f718d5e50b..ae08761ffff1 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -134,6 +134,47 @@ dfsrr; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index 3839d4b7d6a7..5b76bb26085a 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -95,6 +95,41 @@ mode = "cpu"; }; + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + /* phy type (ULPI or SERIAL) are only types supported for MPH */ /* port = 0 or 1 */ usb@22000 { diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index d252e38283e7..21cbacb1000c 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -193,6 +193,47 @@ dfsrr; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts index e556c5a4cf95..db3632ef9888 100644 --- a/arch/powerpc/boot/dts/sbc8560.dts +++ b/arch/powerpc/boot/dts/sbc8560.dts @@ -98,6 +98,47 @@ dfsrr; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts index 3eebeec157b3..9652456158fb 100644 --- a/arch/powerpc/boot/dts/sbc8641d.dts +++ b/arch/powerpc/boot/dts/sbc8641d.dts @@ -151,6 +151,47 @@ dfsrr; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts index 1e612836b248..fcd1db6ca0a8 100644 --- a/arch/powerpc/boot/dts/stx_gp3_8560.dts +++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts @@ -83,6 +83,47 @@ dfsrr; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index 3504db31d4b9..e1d260b9085e 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -90,6 +90,47 @@ }; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index 8241ae3051f5..d083a648a81d 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -89,6 +89,47 @@ }; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index d8a1b198b079..64d2d5bbcdf1 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -96,6 +96,47 @@ dfsrr; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index e80b45034291..13cd7280cb26 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -96,6 +96,47 @@ dfsrr; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index 5a57cefadaa1..96b0b94ad925 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -89,6 +89,47 @@ }; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts index 6794882a0278..3fe35208907b 100644 --- a/arch/powerpc/boot/dts/tqm8560.dts +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -91,6 +91,47 @@ }; }; + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + mdio@24520 { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3 From b660398101cd0622325480a67ac88bb4d33d553a Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 27 Jun 2008 14:39:42 +0100 Subject: kbuild: fix a.out.h export to userspace with O= build. We need to check for existence of the a.out.h header in the source tree, not the object tree, if we want it to get the right answer with O=. Signed-off-by: David Woodhouse Signed-off-by: Sam Ravnborg --- include/asm-generic/Kbuild.asm | 2 +- include/asm-powerpc/Kbuild | 1 - include/linux/Kbuild | 2 +- 3 files changed, 2 insertions(+), 3 deletions(-) diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm index 92a6d91d0c1a..7cd25b8e7c9a 100644 --- a/include/asm-generic/Kbuild.asm +++ b/include/asm-generic/Kbuild.asm @@ -1,6 +1,6 @@ header-y += kvm.h -ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h) +ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),) unifdef-y += a.out.h endif unifdef-y += auxvec.h diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild index 7381916dfcbb..bca352e033c3 100644 --- a/include/asm-powerpc/Kbuild +++ b/include/asm-powerpc/Kbuild @@ -1,6 +1,5 @@ include include/asm-generic/Kbuild.asm -header-y += a.out.h header-y += auxvec.h header-y += ioctls.h header-y += mman.h diff --git a/include/linux/Kbuild b/include/linux/Kbuild index b6fbb2573e88..71d70d1fbce2 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -166,7 +166,7 @@ unifdef-y += acct.h unifdef-y += adb.h unifdef-y += adfs_fs.h unifdef-y += agpgart.h -ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h) +ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),) unifdef-y += a.out.h endif unifdef-y += apm_bios.h -- cgit v1.2.3 From 8c2e870a625bd336b2e7a65a97c1836acef07322 Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Sat, 28 Jun 2008 08:30:52 +1000 Subject: Ensure interrupted recovery completed properly (v1 metadata plus bitmap) If, while assembling an array, we find a device which is not fully in-sync with the array, it is important to set the "fullsync" flags. This is an exact analog to the setting of this flag in hot_add_disk methods. Currently, only v1.x metadata supports having devices in an array which are not fully in-sync (it keep track of how in sync they are). The 'fullsync' flag only makes a difference when a write-intent bitmap is being used. In this case it tells recovery to ignore the bitmap and recovery all blocks. This fix is already in place for raid1, but not raid5/6 or raid10. So without this fix, a raid1 ir raid4/5/6 array with version 1.x metadata and a write intent bitmaps, that is stopped in the middle of a recovery, will appear to complete the recovery instantly after it is reassembled, but the recovery will not be correct. If you might have an array like that, issueing echo repair > /sys/block/mdXX/md/sync_action will make sure recovery completes properly. Cc: Signed-off-by: Neil Brown --- drivers/md/raid10.c | 2 ++ drivers/md/raid5.c | 4 +++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 1de17da34a95..a71277b640ab 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -2137,6 +2137,8 @@ static int run(mddev_t *mddev) !test_bit(In_sync, &disk->rdev->flags)) { disk->head_position = 0; mddev->degraded++; + if (disk->rdev) + conf->fullsync = 1; } } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index c37e256b1176..475fba4d371e 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4305,7 +4305,9 @@ static int run(mddev_t *mddev) " disk %d\n", bdevname(rdev->bdev,b), raid_disk); working_disks++; - } + } else + /* Cannot rely on bitmap to complete recovery */ + conf->fullsync = 1; } /* -- cgit v1.2.3 From efe311431869b40d67911820a309f9a1a41306f3 Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Sat, 28 Jun 2008 08:31:14 +1000 Subject: Don't acknowlege that stripe-expand is complete until it really is. We shouldn't acknowledge that a stripe has been expanded (When reshaping a raid5 by adding a device) until the moved data has actually been written out. However we are currently acknowledging (by calling md_done_sync) when the POST_XOR is complete and before the write. So track in s.locked whether there are pending writes, and don't call md_done_sync yet if there are. Note: we all set R5_LOCKED on devices which are are about to read from. This probably isn't technically necessary, but is usually done when writing a block, and justifies the use of s.locked here. This bug can lead to a crash if an array is stopped while an reshape is in progress. Cc: Signed-off-by: Neil Brown --- drivers/md/raid5.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 475fba4d371e..54c8ee28fcc4 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2898,6 +2898,8 @@ static void handle_stripe5(struct stripe_head *sh) for (i = conf->raid_disks; i--; ) { set_bit(R5_Wantwrite, &sh->dev[i].flags); + set_bit(R5_LOCKED, &dev->flags); + s.locked++; if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending)) sh->ops.count++; } @@ -2911,6 +2913,7 @@ static void handle_stripe5(struct stripe_head *sh) conf->raid_disks); s.locked += handle_write_operations5(sh, 1, 1); } else if (s.expanded && + s.locked == 0 && !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) { clear_bit(STRIPE_EXPAND_READY, &sh->state); atomic_dec(&conf->reshape_stripes); -- cgit v1.2.3 From 9bbbca3a0ee09293108b67835c6bdf6196d7bcb3 Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Sat, 28 Jun 2008 08:31:17 +1000 Subject: Fix error paths if md_probe fails. md_probe can fail (e.g. alloc_disk could fail) without returning an error (as it alway returns NULL). So when we call mddev_find immediately afterwards, we need to check that md_probe actually succeeded. This means checking that mdev->gendisk is non-NULL. cc: Cc: Dave Jones Signed-off-by: Neil Brown --- drivers/md/md.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 7cf512a34ccf..2580ac1b9b0f 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3897,8 +3897,10 @@ static void autorun_devices(int part) md_probe(dev, NULL, NULL); mddev = mddev_find(dev); - if (!mddev) { - printk(KERN_ERR + if (!mddev || !mddev->gendisk) { + if (mddev) + mddev_put(mddev); + printk(KERN_ERR "md: cannot allocate memory for md drive.\n"); break; } -- cgit v1.2.3 From 479798211967cd828e09ce27775b8cbfe99462ab Mon Sep 17 00:00:00 2001 From: Andre Haupt Date: Fri, 27 Jun 2008 17:22:08 -0700 Subject: hamradio: remove unused variable Signed-off-by: Andre Haupt Signed-off-by: David S. Miller --- drivers/net/hamradio/dmascc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c index 0b94833e23f7..e8cfadefa4b6 100644 --- a/drivers/net/hamradio/dmascc.c +++ b/drivers/net/hamradio/dmascc.c @@ -1077,8 +1077,6 @@ static inline void rx_off(struct scc_priv *priv) static void start_timer(struct scc_priv *priv, int t, int r15) { - unsigned long flags; - outb(priv->tmr_mode, priv->tmr_ctrl); if (t == 0) { tm_isr(priv); -- cgit v1.2.3 From 57413ebc4e0f1e471a3b4db4aff9a85c083d090e Mon Sep 17 00:00:00 2001 From: Miquel van Smoorenburg Date: Fri, 27 Jun 2008 17:23:57 -0700 Subject: tcp: calculate tcp_mem based on low memory instead of all memory The tcp_mem array which contains limits on the total amount of memory used by TCP sockets is calculated based on nr_all_pages. On a 32 bits x86 system, we should base this on the number of lowmem pages. Signed-off-by: Miquel van Smoorenburg Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index fc54a48fde1e..850825dc86e6 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -260,6 +260,8 @@ #include #include #include +#include +#include #include #include #include @@ -2620,7 +2622,7 @@ __setup("thash_entries=", set_thash_entries); void __init tcp_init(void) { struct sk_buff *skb = NULL; - unsigned long limit; + unsigned long nr_pages, limit; int order, i, max_share; BUILD_BUG_ON(sizeof(struct tcp_skb_cb) > sizeof(skb->cb)); @@ -2689,8 +2691,9 @@ void __init tcp_init(void) * is up to 1/2 at 256 MB, decreasing toward zero with the amount of * memory, with a floor of 128 pages. */ - limit = min(nr_all_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT); - limit = (limit * (nr_all_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11); + nr_pages = totalram_pages - totalhigh_pages; + limit = min(nr_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT); + limit = (limit * (nr_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11); limit = max(limit, 128UL); sysctl_tcp_mem[0] = limit / 4 * 3; sysctl_tcp_mem[1] = limit; -- cgit v1.2.3 From db43a282d3ec92ea45109c5551fff3dcc5afef02 Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Fri, 27 Jun 2008 17:27:21 -0700 Subject: tcp: fix for splice receive when used with software LRO If an skb has nr_frags set to zero but its frag_list is not empty (as it can happen if software LRO is enabled), and a previous tcp_read_sock has consumed the linear part of the skb, then __skb_splice_bits: (a) incorrectly reports an error and (b) forgets to update the offset to account for the linear part Any of the two problems will cause the subsequent __skb_splice_bits call (the one that handles the frag_list skbs) to either skip data, or, if the unadjusted offset is greater then the size of the next skb in the frag_list, make tcp_splice_read loop forever. Signed-off-by: Octavian Purdila Signed-off-by: David S. Miller --- net/core/skbuff.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 1e556d312117..366621610e76 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1292,12 +1292,14 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, { unsigned int nr_pages = spd->nr_pages; unsigned int poff, plen, len, toff, tlen; - int headlen, seg; + int headlen, seg, error = 0; toff = *offset; tlen = *total_len; - if (!tlen) + if (!tlen) { + error = 1; goto err; + } /* * if the offset is greater than the linear part, go directly to @@ -1339,7 +1341,8 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, * just jump directly to update and return, no point * in going over fragments when the output is full. */ - if (spd_fill_page(spd, virt_to_page(p), plen, poff, skb)) + error = spd_fill_page(spd, virt_to_page(p), plen, poff, skb); + if (error) goto done; tlen -= plen; @@ -1369,7 +1372,8 @@ map_frag: if (!plen) break; - if (spd_fill_page(spd, f->page, plen, poff, skb)) + error = spd_fill_page(spd, f->page, plen, poff, skb); + if (error) break; tlen -= plen; @@ -1382,7 +1386,10 @@ done: return 0; } err: - return 1; + /* update the offset to reflect the linear part skip, if any */ + if (!error) + *offset = toff; + return error; } /* -- cgit v1.2.3 From ec0d215f9420564fc8286dcf93d2d068bb53a07e Mon Sep 17 00:00:00 2001 From: Rainer Weikusat Date: Fri, 27 Jun 2008 19:34:18 -0700 Subject: af_unix: fix 'poll for write'/connected DGRAM sockets For n:1 'datagram connections' (eg /dev/log), the unix_dgram_sendmsg routine implements a form of receiver-imposed flow control by comparing the length of the receive queue of the 'peer socket' with the max_ack_backlog value stored in the corresponding sock structure, either blocking the thread which caused the send-routine to be called or returning EAGAIN. This routine is used by both SOCK_DGRAM and SOCK_SEQPACKET sockets. The poll-implementation for these socket types is datagram_poll from core/datagram.c. A socket is deemed to be writeable by this routine when the memory presently consumed by datagrams owned by it is less than the configured socket send buffer size. This is always wrong for PF_UNIX non-stream sockets connected to server sockets dealing with (potentially) multiple clients if the abovementioned receive queue is currently considered to be full. 'poll' will then return, indicating that the socket is writeable, but a subsequent write result in EAGAIN, effectively causing an (usual) application to 'poll for writeability by repeated send request with O_NONBLOCK set' until it has consumed its time quantum. The change below uses a suitably modified variant of the datagram_poll routines for both type of PF_UNIX sockets, which tests if the recv-queue of the peer a socket is connected to is presently considered to be 'full' as part of the 'is this socket writeable'-checking code. The socket being polled is additionally put onto the peer_wait wait queue associated with its peer, because the unix_dgram_recvmsg routine does a wake up on this queue after a datagram was received and the 'other wakeup call' is done implicitly as part of skb destruction, meaning, a process blocked in poll because of a full peer receive queue could otherwise sleep forever if no datagram owned by its socket was already sitting on this queue. Among this change is a small (inline) helper routine named 'unix_recvq_full', which consolidates the actual testing code (in three different places) into a single location. Signed-off-by: Rainer Weikusat Signed-off-by: David S. Miller --- net/unix/af_unix.c | 52 ++++++++++++++++++++++++---------------------------- 1 file changed, 24 insertions(+), 28 deletions(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 657835f227d3..783317dacd30 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -487,8 +487,8 @@ static int unix_socketpair(struct socket *, struct socket *); static int unix_accept(struct socket *, struct socket *, int); static int unix_getname(struct socket *, struct sockaddr *, int *, int); static unsigned int unix_poll(struct file *, struct socket *, poll_table *); -static unsigned int unix_datagram_poll(struct file *, struct socket *, - poll_table *); +static unsigned int unix_dgram_poll(struct file *, struct socket *, + poll_table *); static int unix_ioctl(struct socket *, unsigned int, unsigned long); static int unix_shutdown(struct socket *, int); static int unix_stream_sendmsg(struct kiocb *, struct socket *, @@ -534,7 +534,7 @@ static const struct proto_ops unix_dgram_ops = { .socketpair = unix_socketpair, .accept = sock_no_accept, .getname = unix_getname, - .poll = unix_datagram_poll, + .poll = unix_dgram_poll, .ioctl = unix_ioctl, .listen = sock_no_listen, .shutdown = unix_shutdown, @@ -555,7 +555,7 @@ static const struct proto_ops unix_seqpacket_ops = { .socketpair = unix_socketpair, .accept = unix_accept, .getname = unix_getname, - .poll = unix_datagram_poll, + .poll = unix_dgram_poll, .ioctl = unix_ioctl, .listen = unix_listen, .shutdown = unix_shutdown, @@ -1994,29 +1994,13 @@ static unsigned int unix_poll(struct file * file, struct socket *sock, poll_tabl return mask; } -static unsigned int unix_datagram_poll(struct file *file, struct socket *sock, - poll_table *wait) +static unsigned int unix_dgram_poll(struct file *file, struct socket *sock, + poll_table *wait) { - struct sock *sk = sock->sk, *peer; - unsigned int mask; + struct sock *sk = sock->sk, *other; + unsigned int mask, writable; poll_wait(file, sk->sk_sleep, wait); - - peer = unix_peer_get(sk); - if (peer) { - if (peer != sk) { - /* - * Writability of a connected socket additionally - * depends on the state of the receive queue of the - * peer. - */ - poll_wait(file, &unix_sk(peer)->peer_wait, wait); - } else { - sock_put(peer); - peer = NULL; - } - } - mask = 0; /* exceptional events? */ @@ -2042,14 +2026,26 @@ static unsigned int unix_datagram_poll(struct file *file, struct socket *sock, } /* writable? */ - if (unix_writable(sk) && !(peer && unix_recvq_full(peer))) + writable = unix_writable(sk); + if (writable) { + other = unix_peer_get(sk); + if (other) { + if (unix_peer(other) != sk) { + poll_wait(file, &unix_sk(other)->peer_wait, + wait); + if (unix_recvq_full(other)) + writable = 0; + } + + sock_put(other); + } + } + + if (writable) mask |= POLLOUT | POLLWRNORM | POLLWRBAND; else set_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags); - if (peer) - sock_put(peer); - return mask; } -- cgit v1.2.3 From 5dbaec5dc6a4895db8bf9765a867418481ed7311 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Fri, 27 Jun 2008 19:35:16 -0700 Subject: netdevice: Fix typo of dev_unicast_add() comment Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index c421a1f8f0b9..56b46579ff4e 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2973,7 +2973,7 @@ EXPORT_SYMBOL(dev_unicast_delete); /** * dev_unicast_add - add a secondary unicast address * @dev: device - * @addr: address to delete + * @addr: address to add * @alen: length of @addr * * Add a secondary unicast address to the device or increase -- cgit v1.2.3 From 01e123d79a23000f85c4cfb12a957908c0b2c3d8 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Fri, 27 Jun 2008 19:51:35 -0700 Subject: pkt_sched: ERR_PTR() ususally encodes an negative errno, not positive. Note, in the following patch, 'err' is initialized as: int err = -ENOBUFS; Signed-off-by: WANG Cong Signed-off-by: David S. Miller --- net/sched/sch_generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index d355e5e47fe3..13afa7214392 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -468,7 +468,7 @@ struct Qdisc *qdisc_alloc(struct net_device *dev, struct Qdisc_ops *ops) return sch; errout: - return ERR_PTR(-err); + return ERR_PTR(err); } struct Qdisc * qdisc_create_dflt(struct net_device *dev, struct Qdisc_ops *ops, -- cgit v1.2.3 From ede16af4cdbd21fa15d4178beb7c6fcbcccd07e9 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 27 Jun 2008 19:54:05 -0700 Subject: pkt_sched: Remove CONFIG_NET_SCH_RR Commit d62733c8e437fdb58325617c4b3331769ba82d70 ([SCHED]: Qdisc changes and sch_rr added for multiqueue) added a NET_SCH_RR option that was unused since the code went unconditionally into sch_prio. Reported-by: Robert P. J. Day Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller --- net/sched/Kconfig | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/net/sched/Kconfig b/net/sched/Kconfig index 82adfe6447d7..9437b27ff84d 100644 --- a/net/sched/Kconfig +++ b/net/sched/Kconfig @@ -106,17 +106,6 @@ config NET_SCH_PRIO To compile this code as a module, choose M here: the module will be called sch_prio. -config NET_SCH_RR - tristate "Multi Band Round Robin Queuing (RR)" - select NET_SCH_PRIO - ---help--- - Say Y here if you want to use an n-band round robin packet - scheduler. - - The module uses sch_prio for its framework and is aliased as - sch_rr, so it will load sch_prio, although it is referred - to using sch_rr. - config NET_SCH_RED tristate "Random Early Detection (RED)" ---help--- -- cgit v1.2.3 From c88e6f51c2154c7606f7e281bcca2d1a2c89d7b2 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 27 Jun 2008 19:54:54 -0700 Subject: include/linux/netdevice.h: don't export MAX_HEADER to userspace Due to the CONFIG_'s the value is anyway not correct in userspace. Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller --- include/linux/netdevice.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index f27fd2009334..25f87102ab66 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -88,6 +88,8 @@ struct wireless_dev; #define NETDEV_TX_BUSY 1 /* driver tx path was busy*/ #define NETDEV_TX_LOCKED -1 /* driver tx lock was already taken */ +#ifdef __KERNEL__ + /* * Compute the worst case header length according to the protocols * used. @@ -114,6 +116,8 @@ struct wireless_dev; #define MAX_HEADER (LL_MAX_HEADER + 48) #endif +#endif /* __KERNEL__ */ + struct net_device_subqueue { /* Give a control state for each queue. This struct may contain -- cgit v1.2.3 From 7be87351a1f6430426e88b4fcde353ab3330caff Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 27 Jun 2008 20:00:19 -0700 Subject: tcp: /proc/net/tcp rto,ato values not scaled properly (v2) I found another case where we are sending information to userspace in the wrong HZ scale. This should have been fixed back in 2.5 :-( This means an ABI change but as it stands there is no way for an application like ss to get the right value. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/ipv4/tcp_ipv4.c | 6 +++--- net/ipv6/tcp_ipv6.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 12695be2c255..ffe869ac1bcf 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -2291,7 +2291,7 @@ static void get_tcp4_sock(struct sock *sk, struct seq_file *f, int i, int *len) } seq_printf(f, "%4d: %08X:%04X %08X:%04X %02X %08X:%08X %02X:%08lX " - "%08X %5d %8d %lu %d %p %u %u %u %u %d%n", + "%08X %5d %8d %lu %d %p %lu %lu %u %u %d%n", i, src, srcp, dest, destp, sk->sk_state, tp->write_seq - tp->snd_una, sk->sk_state == TCP_LISTEN ? sk->sk_ack_backlog : @@ -2303,8 +2303,8 @@ static void get_tcp4_sock(struct sock *sk, struct seq_file *f, int i, int *len) icsk->icsk_probes_out, sock_i_ino(sk), atomic_read(&sk->sk_refcnt), sk, - icsk->icsk_rto, - icsk->icsk_ack.ato, + jiffies_to_clock_t(icsk->icsk_rto), + jiffies_to_clock_t(icsk->icsk_ack.ato), (icsk->icsk_ack.quick << 1) | icsk->icsk_ack.pingpong, tp->snd_cwnd, tp->snd_ssthresh >= 0xFFFF ? -1 : tp->snd_ssthresh, diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index cb46749d4c32..40ea9c36d24b 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -2036,7 +2036,7 @@ static void get_tcp6_sock(struct seq_file *seq, struct sock *sp, int i) seq_printf(seq, "%4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X " - "%02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %u %u %u %u %d\n", + "%02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %lu %lu %u %u %d\n", i, src->s6_addr32[0], src->s6_addr32[1], src->s6_addr32[2], src->s6_addr32[3], srcp, @@ -2052,8 +2052,8 @@ static void get_tcp6_sock(struct seq_file *seq, struct sock *sp, int i) icsk->icsk_probes_out, sock_i_ino(sp), atomic_read(&sp->sk_refcnt), sp, - icsk->icsk_rto, - icsk->icsk_ack.ato, + jiffies_to_clock_t(icsk->icsk_rto), + jiffies_to_clock_t(icsk->icsk_ack.ato), (icsk->icsk_ack.quick << 1 ) | icsk->icsk_ack.pingpong, tp->snd_cwnd, tp->snd_ssthresh>=0xFFFF?-1:tp->snd_ssthresh ); -- cgit v1.2.3 From 10b595aff138961b520bfed51d664fd99980f6e9 Mon Sep 17 00:00:00 2001 From: Julius Volz Date: Fri, 27 Jun 2008 20:02:14 -0700 Subject: netlink: Fix some doc comments in net/netlink/attr.c Fix some doc comments to match function and attribute names in net/netlink/attr.c. Signed-off-by: Julius Volz Signed-off-by: David S. Miller --- net/netlink/attr.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/netlink/attr.c b/net/netlink/attr.c index 47bbf45ae5d7..2d106cfe1d27 100644 --- a/net/netlink/attr.c +++ b/net/netlink/attr.c @@ -132,6 +132,7 @@ errout: * @maxtype: maximum attribute type to be expected * @head: head of attribute stream * @len: length of attribute stream + * @policy: validation policy * * Parses a stream of attributes and stores a pointer to each attribute in * the tb array accessable via the attribute type. Attributes with a type @@ -194,7 +195,7 @@ struct nlattr *nla_find(struct nlattr *head, int len, int attrtype) /** * nla_strlcpy - Copy string attribute payload into a sized buffer * @dst: where to copy the string to - * @src: attribute to copy the string from + * @nla: attribute to copy the string from * @dstsize: size of destination buffer * * Copies at most dstsize - 1 bytes into the destination buffer. @@ -340,9 +341,9 @@ struct nlattr *nla_reserve(struct sk_buff *skb, int attrtype, int attrlen) } /** - * nla_reserve - reserve room for attribute without header + * nla_reserve_nohdr - reserve room for attribute without header * @skb: socket buffer to reserve room on - * @len: length of attribute payload + * @attrlen: length of attribute payload * * Reserves room for attribute payload without a header. * -- cgit v1.2.3 From a0a61a604c60c14accc3962ecfeee9acc7a3c08a Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 27 Jun 2008 20:03:24 -0700 Subject: CONNECTOR: add a proc entry to list connectors I got a problem when I wanted to check if the kernel supports process event connector, and It seems there's no way to do this check. At best I can check if the kernel supports connector or not, by looking into /proc/net/netlink, or maybe checking the return value of bind() to see if it's ENOENT. So it would be useful to add /proc/net/connector to list all supported connectors: # cat /proc/net/connector Name ID connector 4294967295:4294967295 cn_proc 1:1 w1 3:1 Changelog: - fix memory leak: s/seq_release/single_release - use spin_lock_bh instead of spin_lock_irqsave Signed-off-by: Li Zefan Acked-by: Evgeniy Polyakov Signed-off-by: David S. Miller --- drivers/connector/connector.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index 85e2ba7fcfba..bf4830082a13 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include #include @@ -403,6 +405,40 @@ static void cn_callback(void *data) mutex_unlock(¬ify_lock); } +static int cn_proc_show(struct seq_file *m, void *v) +{ + struct cn_queue_dev *dev = cdev.cbdev; + struct cn_callback_entry *cbq; + + seq_printf(m, "Name ID\n"); + + spin_lock_bh(&dev->queue_lock); + + list_for_each_entry(cbq, &dev->queue_list, callback_entry) { + seq_printf(m, "%-15s %u:%u\n", + cbq->id.name, + cbq->id.id.idx, + cbq->id.id.val); + } + + spin_unlock_bh(&dev->queue_lock); + + return 0; +} + +static int cn_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, cn_proc_show, NULL); +} + +static const struct file_operations cn_file_ops = { + .owner = THIS_MODULE, + .open = cn_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release +}; + static int __devinit cn_init(void) { struct cn_dev *dev = &cdev; @@ -434,6 +470,8 @@ static int __devinit cn_init(void) return -EINVAL; } + proc_net_fops_create(&init_net, "connector", S_IRUGO, &cn_file_ops); + return 0; } @@ -443,6 +481,8 @@ static void __devexit cn_fini(void) cn_already_initialized = 0; + proc_net_remove(&init_net, "connector"); + cn_del_callback(&dev->id); cn_queue_free_dev(dev->cbdev); netlink_kernel_release(dev->nls); -- cgit v1.2.3 From 9a375803feaadb6c34e0807bd9325885dcca5c00 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Fri, 27 Jun 2008 20:06:08 -0700 Subject: inet fragments: fix race between inet_frag_find and inet_frag_secret_rebuild The problem is that while we work w/o the inet_frags.lock even read-locked the secret rebuild timer may occur (on another CPU, since BHs are still disabled in the inet_frag_find) and change the rnd seed for ipv4/6 fragments. It was caused by my patch fd9e63544cac30a34c951f0ec958038f0529e244 ([INET]: Omit double hash calculations in xxx_frag_intern) late in the 2.6.24 kernel, so this should probably be queued to -stable. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/ipv4/inet_fragment.c | 16 +++++++++++----- net/ipv4/ip_fragment.c | 2 ++ net/ipv6/netfilter/nf_conntrack_reasm.c | 3 ++- net/ipv6/reassembly.c | 2 ++ 4 files changed, 17 insertions(+), 6 deletions(-) diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c index 4ed429bd5951..0546a0bc97ea 100644 --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -192,14 +192,21 @@ EXPORT_SYMBOL(inet_frag_evictor); static struct inet_frag_queue *inet_frag_intern(struct netns_frags *nf, struct inet_frag_queue *qp_in, struct inet_frags *f, - unsigned int hash, void *arg) + void *arg) { struct inet_frag_queue *qp; #ifdef CONFIG_SMP struct hlist_node *n; #endif + unsigned int hash; write_lock(&f->lock); + /* + * While we stayed w/o the lock other CPU could update + * the rnd seed, so we need to re-calculate the hash + * chain. Fortunatelly the qp_in can be used to get one. + */ + hash = f->hashfn(qp_in); #ifdef CONFIG_SMP /* With SMP race we have to recheck hash table, because * such entry could be created on other cpu, while we @@ -247,7 +254,7 @@ static struct inet_frag_queue *inet_frag_alloc(struct netns_frags *nf, } static struct inet_frag_queue *inet_frag_create(struct netns_frags *nf, - struct inet_frags *f, void *arg, unsigned int hash) + struct inet_frags *f, void *arg) { struct inet_frag_queue *q; @@ -255,7 +262,7 @@ static struct inet_frag_queue *inet_frag_create(struct netns_frags *nf, if (q == NULL) return NULL; - return inet_frag_intern(nf, q, f, hash, arg); + return inet_frag_intern(nf, q, f, arg); } struct inet_frag_queue *inet_frag_find(struct netns_frags *nf, @@ -264,7 +271,6 @@ struct inet_frag_queue *inet_frag_find(struct netns_frags *nf, struct inet_frag_queue *q; struct hlist_node *n; - read_lock(&f->lock); hlist_for_each_entry(q, n, &f->hash[hash], list) { if (q->net == nf && f->match(q, key)) { atomic_inc(&q->refcnt); @@ -274,6 +280,6 @@ struct inet_frag_queue *inet_frag_find(struct netns_frags *nf, } read_unlock(&f->lock); - return inet_frag_create(nf, f, key, hash); + return inet_frag_create(nf, f, key); } EXPORT_SYMBOL(inet_frag_find); diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index cd6ce6ac6358..37221f659159 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -229,6 +229,8 @@ static inline struct ipq *ip_find(struct net *net, struct iphdr *iph, u32 user) arg.iph = iph; arg.user = user; + + read_lock(&ip4_frags.lock); hash = ipqhashfn(iph->id, iph->saddr, iph->daddr, iph->protocol); q = inet_frag_find(&net->ipv4.frags, &ip4_frags, &arg, hash); diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index e65e26e210ee..cf20bc4fd60d 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -207,9 +207,10 @@ fq_find(__be32 id, struct in6_addr *src, struct in6_addr *dst) arg.id = id; arg.src = src; arg.dst = dst; + + read_lock_bh(&nf_frags.lock); hash = ip6qhashfn(id, src, dst); - local_bh_disable(); q = inet_frag_find(&nf_init_frags, &nf_frags, &arg, hash); local_bh_enable(); if (q == NULL) diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c index 798cabc7535b..a60d7d129713 100644 --- a/net/ipv6/reassembly.c +++ b/net/ipv6/reassembly.c @@ -247,6 +247,8 @@ fq_find(struct net *net, __be32 id, struct in6_addr *src, struct in6_addr *dst, arg.id = id; arg.src = src; arg.dst = dst; + + read_lock(&ip6_frags.lock); hash = ip6qhashfn(id, src, dst); q = inet_frag_find(&net->ipv6.frags, &ip6_frags, &arg, hash); -- cgit v1.2.3 From 251a4b320f2352598f84e4452ab538aa8064af52 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Fri, 27 Jun 2008 20:09:00 -0700 Subject: net/inet_lro: remove setting skb->ip_summed when not LRO-able When an SKB cannot be chained to a session, the current code attempts to "restore" its ip_summed field from lro_mgr->ip_summed. However, lro_mgr->ip_summed does not hold the original value; in fact, we'd better not touch skb->ip_summed since it is not modified by the code in the path leading to a failure to chain it. Also use a cleaer comment to the describe the ip_summed field of struct net_lro_mgr. Issue raised by Or Gerlitz Signed-off-by: Eli Cohen Signed-off-by: David S. Miller --- include/linux/inet_lro.h | 6 +++++- net/ipv4/inet_lro.c | 3 +-- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/linux/inet_lro.h b/include/linux/inet_lro.h index 80335b7d77c5..c4335faebb63 100644 --- a/include/linux/inet_lro.h +++ b/include/linux/inet_lro.h @@ -84,7 +84,11 @@ struct net_lro_mgr { from received packets and eth protocol is still ETH_P_8021Q */ - u32 ip_summed; /* Set in non generated SKBs in page mode */ + /* + * Set for generated SKBs that are not added to + * the frag list in fragmented mode + */ + u32 ip_summed; u32 ip_summed_aggr; /* Set in aggregated SKBs: CHECKSUM_UNNECESSARY * or CHECKSUM_NONE */ diff --git a/net/ipv4/inet_lro.c b/net/ipv4/inet_lro.c index 4a4d49fca1f2..cfd034a2b96e 100644 --- a/net/ipv4/inet_lro.c +++ b/net/ipv4/inet_lro.c @@ -383,8 +383,7 @@ static int __lro_proc_skb(struct net_lro_mgr *lro_mgr, struct sk_buff *skb, out2: /* send aggregated SKBs to stack */ lro_flush(lro_mgr, lro_desc); -out: /* Original SKB has to be posted to stack */ - skb->ip_summed = lro_mgr->ip_summed; +out: return 1; } -- cgit v1.2.3 From 59d88c00cafe5192b058abf4f3ce17c2e27d1c09 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Fri, 27 Jun 2008 20:12:32 -0700 Subject: netlabel: Fix a problem when dumping the default IPv6 static labels There is a missing "!" in a conditional statement which is causing entries to be skipped when dumping the default IPv6 static label entries. This can be demonstrated by running the following: # netlabelctl unlbl add default address:::1 \ label:system_u:object_r:unlabeled_t:s0 # netlabelctl -p unlbl list ... you will notice that the entry for the IPv6 localhost address is not displayed but does exist (works correctly, causes collisions when attempting to add duplicate entries, etc.). Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- net/netlabel/netlabel_unlabeled.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c index 0099da5b2591..52b2611a6eb6 100644 --- a/net/netlabel/netlabel_unlabeled.c +++ b/net/netlabel/netlabel_unlabeled.c @@ -1534,7 +1534,7 @@ static int netlbl_unlabel_staticlistdef(struct sk_buff *skb, } } list_for_each_entry_rcu(addr6, &iface->addr6_list, list) { - if (addr6->valid || iter_addr6++ < skip_addr6) + if (!addr6->valid || iter_addr6++ < skip_addr6) continue; if (netlbl_unlabel_staticlist_gen(NLBL_UNLABEL_C_STATICLISTDEF, iface, -- cgit v1.2.3 From d420895efb259a78dda50f95289571faa6e10e41 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Fri, 27 Jun 2008 20:14:54 -0700 Subject: ipv6 route: Convert rt6_device_match() to use RT6_LOOKUP_F_xxx flags. The commit 77d16f450ae0452d7d4b009f78debb1294fb435c ("[IPV6] ROUTE: Unify RT6_F_xxx and RT6_SELECT_F_xxx flags") intended to pass various routing lookup hints around RT6_LOOKUP_F_xxx flags, but conversion was missing for rt6_device_match(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/route.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index d1f3e19b06c7..7ff687020fa9 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -240,7 +240,7 @@ static inline int rt6_need_strict(struct in6_addr *daddr) static inline struct rt6_info *rt6_device_match(struct net *net, struct rt6_info *rt, int oif, - int strict) + int flags) { struct rt6_info *local = NULL; struct rt6_info *sprt; @@ -253,7 +253,7 @@ static inline struct rt6_info *rt6_device_match(struct net *net, if (dev->flags & IFF_LOOPBACK) { if (sprt->rt6i_idev == NULL || sprt->rt6i_idev->dev->ifindex != oif) { - if (strict && oif) + if (flags & RT6_LOOKUP_F_IFACE && oif) continue; if (local && (!oif || local->rt6i_idev->dev->ifindex == oif)) @@ -266,7 +266,7 @@ static inline struct rt6_info *rt6_device_match(struct net *net, if (local) return local; - if (strict) + if (flags & RT6_LOOKUP_F_IFACE) return net->ipv6.ip6_null_entry; } return rt; -- cgit v1.2.3 From 65033ed740ef06eddf9fde7a992eab336cbddd56 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 4 Mar 2008 15:15:00 +0100 Subject: avr32: Move setup_platform() into chip-specific file Combine at32_clock_init() and at32_portmux_init() into setup_platform() and remove setup_platform() from at32ap.c. No functional change since all setup_platform() ever did was call those two functions. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/at32ap.c | 8 -------- arch/avr32/mach-at32ap/at32ap700x.c | 18 ++++++++---------- include/asm-avr32/arch-at32ap/init.h | 4 ---- 3 files changed, 8 insertions(+), 22 deletions(-) diff --git a/arch/avr32/mach-at32ap/at32ap.c b/arch/avr32/mach-at32ap/at32ap.c index 7c4987f3287a..1040bda4fda7 100644 --- a/arch/avr32/mach-at32ap/at32ap.c +++ b/arch/avr32/mach-at32ap/at32ap.c @@ -11,14 +11,6 @@ #include #include -#include - -void __init setup_platform(void) -{ - at32_clock_init(); - at32_portmux_init(); -} - static int __init pdc_probe(struct platform_device *pdev) { struct clk *pclk, *hclk; diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 2f208eb4d3c9..baf4680b4988 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -2048,16 +2048,7 @@ struct clk *at32_clock_list[] = { }; unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list); -void __init at32_portmux_init(void) -{ - at32_init_pio(&pio0_device); - at32_init_pio(&pio1_device); - at32_init_pio(&pio2_device); - at32_init_pio(&pio3_device); - at32_init_pio(&pio4_device); -} - -void __init at32_clock_init(void) +void __init setup_platform(void) { u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0; int i; @@ -2112,4 +2103,11 @@ void __init at32_clock_init(void) pm_writel(HSB_MASK, hsb_mask); pm_writel(PBA_MASK, pba_mask); pm_writel(PBB_MASK, pbb_mask); + + /* Initialize the port muxes */ + at32_init_pio(&pio0_device); + at32_init_pio(&pio1_device); + at32_init_pio(&pio2_device); + at32_init_pio(&pio3_device); + at32_init_pio(&pio4_device); } diff --git a/include/asm-avr32/arch-at32ap/init.h b/include/asm-avr32/arch-at32ap/init.h index 5e75d850d707..bc40e3d46150 100644 --- a/include/asm-avr32/arch-at32ap/init.h +++ b/include/asm-avr32/arch-at32ap/init.h @@ -13,10 +13,6 @@ void setup_platform(void); void setup_board(void); -/* Called by setup_platform */ -void at32_clock_init(void); -void at32_portmux_init(void); - void at32_setup_serial_console(unsigned int usart_id); #endif /* __ASM_AVR32_AT32AP_INIT_H__ */ -- cgit v1.2.3 From d7ff2a4a28ceadc03df2f5a20897165fda306382 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 4 Mar 2008 15:16:57 +0100 Subject: avr32: Rename at32ap.c -> pdc.c The only thing left in at32ap.c is some PDC stuff. Rename the file to reflect what it actually does. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/Makefile | 2 +- arch/avr32/mach-at32ap/at32ap.c | 48 ----------------------------------------- arch/avr32/mach-at32ap/pdc.c | 48 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 49 insertions(+), 49 deletions(-) delete mode 100644 arch/avr32/mach-at32ap/at32ap.c create mode 100644 arch/avr32/mach-at32ap/pdc.c diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile index e89009439e4a..cb44182d3868 100644 --- a/arch/avr32/mach-at32ap/Makefile +++ b/arch/avr32/mach-at32ap/Makefile @@ -1,3 +1,3 @@ -obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o +obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o diff --git a/arch/avr32/mach-at32ap/at32ap.c b/arch/avr32/mach-at32ap/at32ap.c deleted file mode 100644 index 1040bda4fda7..000000000000 --- a/arch/avr32/mach-at32ap/at32ap.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include - -static int __init pdc_probe(struct platform_device *pdev) -{ - struct clk *pclk, *hclk; - - pclk = clk_get(&pdev->dev, "pclk"); - if (IS_ERR(pclk)) { - dev_err(&pdev->dev, "no pclk defined\n"); - return PTR_ERR(pclk); - } - hclk = clk_get(&pdev->dev, "hclk"); - if (IS_ERR(hclk)) { - dev_err(&pdev->dev, "no hclk defined\n"); - clk_put(pclk); - return PTR_ERR(hclk); - } - - clk_enable(pclk); - clk_enable(hclk); - - dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n"); - return 0; -} - -static struct platform_driver pdc_driver = { - .probe = pdc_probe, - .driver = { - .name = "pdc", - }, -}; - -static int __init pdc_init(void) -{ - return platform_driver_register(&pdc_driver); -} -arch_initcall(pdc_init); diff --git a/arch/avr32/mach-at32ap/pdc.c b/arch/avr32/mach-at32ap/pdc.c new file mode 100644 index 000000000000..1040bda4fda7 --- /dev/null +++ b/arch/avr32/mach-at32ap/pdc.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +static int __init pdc_probe(struct platform_device *pdev) +{ + struct clk *pclk, *hclk; + + pclk = clk_get(&pdev->dev, "pclk"); + if (IS_ERR(pclk)) { + dev_err(&pdev->dev, "no pclk defined\n"); + return PTR_ERR(pclk); + } + hclk = clk_get(&pdev->dev, "hclk"); + if (IS_ERR(hclk)) { + dev_err(&pdev->dev, "no hclk defined\n"); + clk_put(pclk); + return PTR_ERR(hclk); + } + + clk_enable(pclk); + clk_enable(hclk); + + dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n"); + return 0; +} + +static struct platform_driver pdc_driver = { + .probe = pdc_probe, + .driver = { + .name = "pdc", + }, +}; + +static int __init pdc_init(void) +{ + return platform_driver_register(&pdc_driver); +} +arch_initcall(pdc_init); -- cgit v1.2.3 From 79c537998d143b127c8c662a403c3356cb885f1c Mon Sep 17 00:00:00 2001 From: Dmitry Adamushko Date: Sun, 29 Jun 2008 00:16:56 +0200 Subject: sched: fix cpu hotplug the CPU hotplug problems (crashes under high-volume unplug+replug tests) seem to be related to migrate_dead_tasks(). Firstly I added traces to see all tasks being migrated with migrate_live_tasks() and migrate_dead_tasks(). On my setup the problem pops up (the one with "se == NULL" in the loop of pick_next_task_fair()) shortly after the traces indicate that some has been migrated with migrate_dead_tasks()). btw., I can reproduce it much faster now with just a plain cpu down/up loop. [disclaimer] Well, unless I'm really missing something important in this late hour [/desclaimer] pick_next_task() is not something appropriate for migrate_dead_tasks() :-) the following change seems to eliminate the problem on my setup (although, I kept it running only for a few minutes to get a few messages indicating migrate_dead_tasks() does move tasks and the system is still ok) Signed-off-by: Ingo Molnar --- kernel/sched.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/sched.c b/kernel/sched.c index 3aaa5c8cb421..a66e85639de2 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5887,6 +5887,7 @@ static void migrate_dead_tasks(unsigned int dead_cpu) next = pick_next_task(rq, rq->curr); if (!next) break; + next->sched_class->put_prev_task(rq, next); migrate_dead(dead_cpu, next); } -- cgit v1.2.3 From 2d452c9b10caeec455eb5e56a0ef4ed485178213 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 29 Jun 2008 15:01:59 +0200 Subject: sched: sched_clock_cpu() based cpu_clock(), lockdep fix Vegard Nossum reported: > WARNING: at kernel/lockdep.c:2738 check_flags+0x142/0x160() which happens due to: unsigned long long cpu_clock(int cpu) { unsigned long long clock; unsigned long flags; raw_local_irq_save(flags); as lower level functions can take locks, we must not do that, use proper lockdep-annotated irq save/restore. Reported-by: Vegard Nossum Signed-off-by: Ingo Molnar --- kernel/sched_clock.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index ed5a8c415046..60094e257a9a 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -250,9 +250,9 @@ unsigned long long cpu_clock(int cpu) unsigned long long clock; unsigned long flags; - raw_local_irq_save(flags); + local_irq_save(flags); clock = sched_clock_cpu(cpu); - raw_local_irq_restore(flags); + local_irq_restore(flags); return clock; } -- cgit v1.2.3 From f72e9df0e04c0ea7b5c97e6db5b114234bf3c36f Mon Sep 17 00:00:00 2001 From: Eduard - Gabriel Munteanu Date: Thu, 26 Jun 2008 10:54:34 +0300 Subject: Fix and clean top .gitignore Removed vmlinux* rule because it matches too many useful files, replacing it with rules matching filetype by filename (e.g. *.gz). Also unignored .mailmap from the top directory. Added a comment telling the user how to check for tracked files being ignored. Signed-off-by: Eduard - Gabriel Munteanu Signed-off-by: Linus Torvalds --- .gitignore | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/.gitignore b/.gitignore index 9bb1cb6d825d..869e1a3b64b6 100644 --- a/.gitignore +++ b/.gitignore @@ -3,6 +3,10 @@ # subdirectories here. Add them in the ".gitignore" file # in that subdirectory instead. # +# NOTE! Please use 'git-ls-files -i --exclude-standard' +# command after changing this file, to see if there are +# any tracked files which get ignored after the change. +# # Normal rules # .* @@ -18,19 +22,21 @@ *.lst *.symtypes *.order +*.elf +*.bin +*.gz # # Top-level generic files # tags TAGS -vmlinux* -!vmlinux.lds.S -!vmlinux.lds.h +vmlinux System.map Module.markers Module.symvers !.gitignore +!.mailmap # # Generated include files -- cgit v1.2.3 From 34e83e850f5e5ee2a18cd77a5d70d31972a632e6 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 27 Jun 2008 15:42:36 +0200 Subject: sched: build fix MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix: kernel/sched.c: In function ‘sched_group_set_shares': kernel/sched.c:8635: error: implicit declaration of function ‘cfs_rq_set_shares' Signed-off-by: Ingo Molnar --- kernel/sched.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 7613f69f0978..058250a63b64 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1627,11 +1627,6 @@ static void update_h_load(int cpu) walk_tg_tree(tg_load_down, tg_nop, cpu, NULL); } -static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares) -{ - cfs_rq->shares = shares; -} - #else static inline void update_shares(struct sched_domain *sd) @@ -1646,6 +1641,13 @@ static inline void update_shares_locked(struct rq *rq, struct sched_domain *sd) #endif +static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares) +{ +#if defined(CONFIG_SMP) && defined(CONFIG_FAIR_GROUP_SCHED) + cfs_rq->shares = shares; +#endif +} + #include "sched_stats.h" #include "sched_idletask.c" #include "sched_fair.c" -- cgit v1.2.3 From 30432094a7f506ad24997a3ba6aed913ab61c01d Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 27 Jun 2008 21:35:50 +0200 Subject: sched: fix warning This patch fixes the following warning: kernel/sched.c:1667: warning: 'cfs_rq_set_shares' defined but not used This seems the correct way to fix this; cfs_rq_set_shares() is only used in a single place, which is also inside #ifdef CONFIG_FAIR_GROUP_SCHED. Signed-off-by: Vegard Nossum Cc: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 058250a63b64..677c80b9a6b5 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1641,12 +1641,14 @@ static inline void update_shares_locked(struct rq *rq, struct sched_domain *sd) #endif +#ifdef CONFIG_FAIR_GROUP_SCHED static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares) { -#if defined(CONFIG_SMP) && defined(CONFIG_FAIR_GROUP_SCHED) +#ifdef CONFIG_SMP cfs_rq->shares = shares; #endif } +#endif #include "sched_stats.h" #include "sched_idletask.c" -- cgit v1.2.3 From 8594698ebddeef5443b7da8258ae33b3eaca61d5 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 27 Jun 2008 21:20:17 +0200 Subject: stacktrace: fix modular build, export print_stack_trace and save_stack_trace fix: ERROR: "print_stack_trace" [kernel/backtracetest.ko] undefined! ERROR: "save_stack_trace" [kernel/backtracetest.ko] undefined! Signed-off-by: Ingo Molnar and fix: Building modules, stage 2. MODPOST 376 modules ERROR: "print_stack_trace" [kernel/backtracetest.ko] undefined! make[1]: *** [__modpost] Error 1 Signed-off-by: Ingo Molnar --- arch/x86/kernel/stacktrace.c | 2 ++ kernel/stacktrace.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index c28c342c162f..a03e7f6d90c3 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -74,6 +74,7 @@ void save_stack_trace(struct stack_trace *trace) if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = ULONG_MAX; } +EXPORT_SYMBOL_GPL(save_stack_trace); void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) { @@ -81,3 +82,4 @@ void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) if (trace->nr_entries < trace->max_entries) trace->entries[trace->nr_entries++] = ULONG_MAX; } +EXPORT_SYMBOL_GPL(save_stack_trace_tsk); diff --git a/kernel/stacktrace.c b/kernel/stacktrace.c index 7eaea9d02a52..94b527ef1d1e 100644 --- a/kernel/stacktrace.c +++ b/kernel/stacktrace.c @@ -6,6 +6,7 @@ * Copyright (C) 2006 Red Hat, Inc., Ingo Molnar */ #include +#include #include #include @@ -21,4 +22,5 @@ void print_stack_trace(struct stack_trace *trace, int spaces) print_ip_sym(trace->entries[i]); } } +EXPORT_SYMBOL_GPL(print_stack_trace); -- cgit v1.2.3 From 44974c8fc1d7047abe414562e0782320f4c1f511 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 30 Jun 2008 08:11:22 +0900 Subject: x86 gart: remove unnecessary set_bit_string iommu_area_alloc internally calls set_bit_string and set bits properly. This set_bit_string is unnecessary. Signed-off-by: FUJITA Tomonori Cc: joerg.roedel@amd.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/pci-gart_64.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index f20c20a7853d..021f3c684a62 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -104,7 +104,6 @@ static unsigned long alloc_iommu(struct device *dev, int size) size, base_index, boundary_size, 0); } if (offset != -1) { - set_bit_string(iommu_gart_bitmap, offset, size); next_bit = offset+size; if (next_bit >= iommu_pages) { next_bit = 0; -- cgit v1.2.3 From ac2564c44509aba1e21d878ffd4f34ac96811762 Mon Sep 17 00:00:00 2001 From: Matti Linnanvuori Date: Sun, 29 Jun 2008 09:22:43 +0300 Subject: x86: add compilation checks to pci_unmap_*() macros Add compilation checks to pci_unmap_ macros. Signed-off-by: Matti Linnanvuori Signed-off-by: Ingo Molnar --- include/asm-x86/pci_32.h | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/include/asm-x86/pci_32.h b/include/asm-x86/pci_32.h index 8c4c3a0368e2..a50d46851285 100644 --- a/include/asm-x86/pci_32.h +++ b/include/asm-x86/pci_32.h @@ -18,12 +18,14 @@ struct pci_dev; #define PCI_DMA_BUS_IS_PHYS (1) /* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME[0]; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) unsigned LEN_NAME[0]; +#define pci_unmap_addr(PTR, ADDR_NAME) sizeof((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + do { break; } while (pci_unmap_addr(PTR, ADDR_NAME)) +#define pci_unmap_len(PTR, LEN_NAME) sizeof((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + do { break; } while (pci_unmap_len(PTR, LEN_NAME)) #endif /* __KERNEL__ */ -- cgit v1.2.3 From fcb43042ef55d2f46b0efa5d7746967cef38f056 Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Tue, 24 Jun 2008 16:06:23 +0800 Subject: x86: fix cpu hotplug crash Vegard Nossum reported crashes during cpu hotplug tests: http://marc.info/?l=linux-kernel&m=121413950227884&w=4 In function _cpu_up, the panic happens when calling __raw_notifier_call_chain at the second time. Kernel doesn't panic when calling it at the first time. If just say because of nr_cpu_ids, that's not right. By checking the source code, I found that function do_boot_cpu is the culprit. Consider below call chain: _cpu_up=>__cpu_up=>smp_ops.cpu_up=>native_cpu_up=>do_boot_cpu. So do_boot_cpu is called in the end. In do_boot_cpu, if boot_error==true, cpu_clear(cpu, cpu_possible_map) is executed. So later on, when _cpu_up calls __raw_notifier_call_chain at the second time to report CPU_UP_CANCELED, because this cpu is already cleared from cpu_possible_map, get_cpu_sysdev returns NULL. Many resources are related to cpu_possible_map, so it's better not to change it. Below patch against 2.6.26-rc7 fixes it by removing the bit clearing in cpu_possible_map. Signed-off-by: Zhang Yanmin Tested-by: Vegard Nossum Acked-by: Rusty Russell Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 56078d61c793..3e1cecedde42 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -996,7 +996,6 @@ do_rest: #endif cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */ cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */ - cpu_clear(cpu, cpu_possible_map); cpu_clear(cpu, cpu_present_map); per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID; } -- cgit v1.2.3 From 74f0609526afddd88bef40b651da24f3167b10b2 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 22 May 2008 00:12:31 +1000 Subject: powerpc: Optimise smp_wmb on 64-bit processors For 64-bit processors, lwsync is the recommended method of store/store ordering on caching enabled memory. For those subarchs which have lwsync, use it rather than eieio for smp_wmb. Signed-off-by: Nick Piggin Signed-off-by: Paul Mackerras --- include/asm-powerpc/system.h | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index d1ced5029c42..145b70f6d22b 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -30,8 +30,8 @@ * * For wmb(), we use sync since wmb is used in drivers to order * stores to system memory with respect to writes to the device. - * However, smp_wmb() can be a lighter-weight eieio barrier on - * SMP since it is only used to order updates to system memory. + * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier + * on SMP since it is only used to order updates to system memory. */ #define mb() __asm__ __volatile__ ("sync" : : : "memory") #define rmb() __asm__ __volatile__ ("sync" : : : "memory") @@ -43,9 +43,16 @@ #ifdef __KERNEL__ #define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */ #ifdef CONFIG_SMP + +#ifdef __SUBARCH_HAS_LWSYNC +# define SMPWMB lwsync +#else +# define SMPWMB eieio +#endif + #define smp_mb() mb() #define smp_rmb() rmb() -#define smp_wmb() eieio() +#define smp_wmb() __asm__ __volatile__ (__stringify(SMPWMB) : : :"memory") #define smp_read_barrier_depends() read_barrier_depends() #else #define smp_mb() barrier() -- cgit v1.2.3 From 10c0ad4dd9ecc3d4141fecbe74c9f18d7f904fb7 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 23 May 2008 15:12:23 +1000 Subject: viotape: Use unlocked_ioctl This pushes the BKL down into the driver. Based on a patch by Alan Cox. We need to do it this way for now as the inode parameter of viotap_ioctl is used internally as a flag. We should do a further cleanup patch. Cc: Alan Cox Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- drivers/char/viotape.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c index c39ddaff5e8f..d4db42ca71e6 100644 --- a/drivers/char/viotape.c +++ b/drivers/char/viotape.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include @@ -677,6 +678,17 @@ free_op: return ret; } +static long viotap_unlocked_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + long rc; + + lock_kernel(); + rc = viotap_ioctl(file->f_path.dentry->d_inode, file, cmd, arg); + unlock_kernel(); + return rc; +} + static int viotap_open(struct inode *inode, struct file *file) { HvLpEvent_Rc hvrc; @@ -783,12 +795,12 @@ free_op: } const struct file_operations viotap_fops = { - .owner = THIS_MODULE, - .read = viotap_read, - .write = viotap_write, - .ioctl = viotap_ioctl, - .open = viotap_open, - .release = viotap_release, + .owner = THIS_MODULE, + .read = viotap_read, + .write = viotap_write, + .unlocked_ioctl = viotap_unlocked_ioctl, + .open = viotap_open, + .release = viotap_release, }; /* Handle interrupt events for tape */ -- cgit v1.2.3 From 98cad10187c0bf5b638bad0912076d8ac9d861bd Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 23 May 2008 16:20:05 +1000 Subject: pasemi-rng: Use linux/of_platform.h instead of asm Signed-off-by: Stephen Rothwell Acked-by: Olof Johansson Signed-off-by: Paul Mackerras --- drivers/char/hw_random/pasemi-rng.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/hw_random/pasemi-rng.c b/drivers/char/hw_random/pasemi-rng.c index 6d50e9bc700b..7fa61dd1d9d9 100644 --- a/drivers/char/hw_random/pasemi-rng.c +++ b/drivers/char/hw_random/pasemi-rng.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #define SDCRNG_CTL_REG 0x00 -- cgit v1.2.3 From 7587cb2f12d47f8160bcdb1328b90f3055291bfc Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 23 May 2008 16:25:50 +1000 Subject: hwmon: Use linux/of_platform.h instead of asm Signed-off-by: Stephen Rothwell Acked-by: Stelian Pop Signed-off-by: Paul Mackerras --- drivers/hwmon/ams/ams-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/ams/ams-core.c b/drivers/hwmon/ams/ams-core.c index a112a03e8f29..fbefa82a015c 100644 --- a/drivers/hwmon/ams/ams-core.c +++ b/drivers/hwmon/ams/ams-core.c @@ -23,8 +23,8 @@ #include #include #include +#include #include -#include #include "ams.h" -- cgit v1.2.3 From ad9e05aef7c861280b404d38fb50a8ff11d01e11 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 23 May 2008 16:27:02 +1000 Subject: macintosh: Use linux/of_{device,platform}.h instead of asm Signed-off-by: Stephen Rothwell Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- drivers/macintosh/smu.c | 4 ++-- drivers/macintosh/therm_adt746x.c | 2 +- drivers/macintosh/therm_pm72.c | 4 ++-- drivers/macintosh/therm_windtunnel.c | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index d86d57af282a..1272184a3a6f 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -35,6 +35,8 @@ #include #include #include +#include +#include #include #include @@ -45,8 +47,6 @@ #include #include #include -#include -#include #define VERSION "0.7" #define AUTHOR "(c) 2005 Benjamin Herrenschmidt, IBM Corp." diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index 5366dc93fb38..22bf981d393b 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -24,13 +24,13 @@ #include #include #include +#include #include #include #include #include #include -#include #undef DEBUG diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index ddfb426a9abd..817607e2af6a 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -123,14 +123,14 @@ #include #include #include +#include +#include #include #include #include #include #include -#include #include -#include #include "therm_pm72.h" diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index d11821af3b8d..6d9e7ac7122b 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -37,13 +37,13 @@ #include #include #include +#include #include #include #include #include #include -#include #include #define LOG_TEMP 0 /* continously log temperature */ -- cgit v1.2.3 From 55b6c8e99d582cc66947b465d0ff3147a0219808 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 23 May 2008 16:28:54 +1000 Subject: drivers/net: Use linux/of_{device,platform}.h instead of asm Signed-off-by: Stephen Rothwell Acked-by: Kumar Gala Signed-off-by: Paul Mackerras --- drivers/net/fs_enet/fs_enet-main.c | 2 +- drivers/net/fs_enet/mac-scc.c | 2 +- drivers/net/fs_enet/mii-fec.c | 2 +- drivers/net/ibm_newemac/core.h | 2 +- drivers/net/ucc_geth.c | 2 +- drivers/net/ucc_geth_mii.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index a5baaf59ff66..352574a3f056 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -43,7 +43,7 @@ #include #ifdef CONFIG_PPC_CPM_NEW_BINDING -#include +#include #endif #include "fs_enet.h" diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c index d7ca31945c82..e3557eca7b6d 100644 --- a/drivers/net/fs_enet/mac-scc.c +++ b/drivers/net/fs_enet/mac-scc.c @@ -44,7 +44,7 @@ #endif #ifdef CONFIG_PPC_CPM_NEW_BINDING -#include +#include #endif #include "fs_enet.h" diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c index f0014cfbb275..8f6a43b0e0ff 100644 --- a/drivers/net/fs_enet/mii-fec.c +++ b/drivers/net/fs_enet/mii-fec.c @@ -37,7 +37,7 @@ #include #ifdef CONFIG_PPC_CPM_NEW_BINDING -#include +#include #endif #include "fs_enet.h" diff --git a/drivers/net/ibm_newemac/core.h b/drivers/net/ibm_newemac/core.h index 1683db9870a4..223090466760 100644 --- a/drivers/net/ibm_newemac/core.h +++ b/drivers/net/ibm_newemac/core.h @@ -33,8 +33,8 @@ #include #include #include +#include -#include #include #include diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index fb0b918e5ccb..402e81020fb8 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -28,8 +28,8 @@ #include #include #include +#include -#include #include #include #include diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c index 940474736922..6d9e7ad9fda9 100644 --- a/drivers/net/ucc_geth_mii.c +++ b/drivers/net/ucc_geth_mii.c @@ -36,8 +36,8 @@ #include #include #include +#include -#include #include #include #include -- cgit v1.2.3 From ad19dbdb4b224deabbf6080e238256ffbc9be485 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 23 May 2008 16:31:08 +1000 Subject: pcmcia: Use linux/of_{device,platform}.h instead of asm Signed-off-by: Stephen Rothwell Acked-by: Vitaly Bordug Acked-by: Olof Johansson Acked-by: Dominik Brodowski Signed-off-by: Paul Mackerras --- drivers/pcmcia/electra_cf.c | 2 +- drivers/pcmcia/m8xx_pcmcia.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c index 52d0aa8c2e7a..c21f9a9c3e3f 100644 --- a/drivers/pcmcia/electra_cf.c +++ b/drivers/pcmcia/electra_cf.c @@ -29,9 +29,9 @@ #include #include #include +#include #include -#include static const char driver_name[] = "electra-cf"; diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index ac70d2cb7dd4..9c5be9a2f3fd 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -49,6 +49,8 @@ #include #include #include +#include +#include #include #include @@ -57,8 +59,6 @@ #include #include #include -#include -#include #include #include -- cgit v1.2.3 From 1976aef97020563d337b4875be0edb9f0fee98aa Mon Sep 17 00:00:00 2001 From: Segher Boessenkool Date: Sun, 8 Jun 2008 09:42:52 +1000 Subject: powerpc: Get rid of CROSS32{AS,LD,OBJCOPY} CROSS32AS and CROSS32LD are never used (instead, CROSS32CC is used with proper command line options). CROSS32OBJCOPY isn't used anymore either, since the "wrapper" stuff was added. Remove these unused variables. Signed-off-by: Segher Boessenkool Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index b7d4c4ce2fe6..59ae7d9cdccf 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -18,22 +18,16 @@ HAS_BIARCH := $(call cc-option-yn, -m32) CROSS32_COMPILE ?= CROSS32CC := $(CROSS32_COMPILE)gcc -CROSS32AS := $(CROSS32_COMPILE)as -CROSS32LD := $(CROSS32_COMPILE)ld CROSS32AR := $(CROSS32_COMPILE)ar -CROSS32OBJCOPY := $(CROSS32_COMPILE)objcopy ifeq ($(HAS_BIARCH),y) ifeq ($(CROSS32_COMPILE),) CROSS32CC := $(CC) -m32 -CROSS32AS := $(AS) -a32 -CROSS32LD := $(LD) -m elf32ppc -CROSS32OBJCOPY := $(OBJCOPY) CROSS32AR := GNUTARGET=elf32-powerpc $(AR) endif endif -export CROSS32CC CROSS32AS CROSS32LD CROSS32AR CROSS32OBJCOPY +export CROSS32CC CROSS32AR ifeq ($(CROSS_COMPILE),) KBUILD_DEFCONFIG := $(shell uname -m)_defconfig -- cgit v1.2.3 From b1e2270ffefb636afd71bbb8bf19aedff0e5ac3d Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Tue, 10 Jun 2008 09:26:08 +1000 Subject: spufs: Convert nopfn to fault Signed-off-by: Nick Piggin Acked-by: Jeremy Kerr Signed-off-by: Andrew Morton Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/spufs/file.c | 98 ++++++++++++++-------------- arch/powerpc/platforms/cell/spufs/sputrace.c | 8 +-- 2 files changed, 54 insertions(+), 52 deletions(-) diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index c81341ff75b5..f74259979cb6 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -238,11 +238,13 @@ spufs_mem_write(struct file *file, const char __user *buffer, return size; } -static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma, - unsigned long address) +static int +spufs_mem_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { struct spu_context *ctx = vma->vm_file->private_data; - unsigned long pfn, offset, addr0 = address; + unsigned long address = (unsigned long)vmf->virtual_address; + unsigned long pfn, offset; + #ifdef CONFIG_SPU_FS_64K_LS struct spu_state *csa = &ctx->csa; int psize; @@ -260,15 +262,15 @@ static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma, } #endif /* CONFIG_SPU_FS_64K_LS */ - offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT); + offset = vmf->pgoff << PAGE_SHIFT; if (offset >= LS_SIZE) - return NOPFN_SIGBUS; + return VM_FAULT_SIGBUS; - pr_debug("spufs_mem_mmap_nopfn address=0x%lx -> 0x%lx, offset=0x%lx\n", - addr0, address, offset); + pr_debug("spufs_mem_mmap_fault address=0x%lx, offset=0x%lx\n", + address, offset); if (spu_acquire(ctx)) - return NOPFN_REFAULT; + return VM_FAULT_NOPAGE; if (ctx->state == SPU_STATE_SAVED) { vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) @@ -283,12 +285,12 @@ static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma, spu_release(ctx); - return NOPFN_REFAULT; + return VM_FAULT_NOPAGE; } static struct vm_operations_struct spufs_mem_mmap_vmops = { - .nopfn = spufs_mem_mmap_nopfn, + .fault = spufs_mem_mmap_fault, }; static int spufs_mem_mmap(struct file *file, struct vm_area_struct *vma) @@ -351,20 +353,19 @@ static const struct file_operations spufs_mem_fops = { #endif }; -static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, - unsigned long address, +static int spufs_ps_fault(struct vm_area_struct *vma, + struct vm_fault *vmf, unsigned long ps_offs, unsigned long ps_size) { struct spu_context *ctx = vma->vm_file->private_data; - unsigned long area, offset = address - vma->vm_start; + unsigned long area, offset = vmf->pgoff << PAGE_SHIFT; int ret = 0; - spu_context_nospu_trace(spufs_ps_nopfn__enter, ctx); + spu_context_nospu_trace(spufs_ps_fault__enter, ctx); - offset += vma->vm_pgoff << PAGE_SHIFT; if (offset >= ps_size) - return NOPFN_SIGBUS; + return VM_FAULT_SIGBUS; /* * Because we release the mmap_sem, the context may be destroyed while @@ -378,7 +379,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, * pages to hand out to the user, but we don't want to wait * with the mmap_sem held. * It is possible to drop the mmap_sem here, but then we need - * to return NOPFN_REFAULT because the mappings may have + * to return VM_FAULT_NOPAGE because the mappings may have * hanged. */ if (spu_acquire(ctx)) @@ -386,14 +387,15 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, if (ctx->state == SPU_STATE_SAVED) { up_read(¤t->mm->mmap_sem); - spu_context_nospu_trace(spufs_ps_nopfn__sleep, ctx); + spu_context_nospu_trace(spufs_ps_fault__sleep, ctx); ret = spufs_wait(ctx->run_wq, ctx->state == SPU_STATE_RUNNABLE); - spu_context_trace(spufs_ps_nopfn__wake, ctx, ctx->spu); + spu_context_trace(spufs_ps_fault__wake, ctx, ctx->spu); down_read(¤t->mm->mmap_sem); } else { area = ctx->spu->problem_phys + ps_offs; - vm_insert_pfn(vma, address, (area + offset) >> PAGE_SHIFT); - spu_context_trace(spufs_ps_nopfn__insert, ctx, ctx->spu); + vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, + (area + offset) >> PAGE_SHIFT); + spu_context_trace(spufs_ps_fault__insert, ctx, ctx->spu); } if (!ret) @@ -401,18 +403,18 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma, refault: put_spu_context(ctx); - return NOPFN_REFAULT; + return VM_FAULT_NOPAGE; } #if SPUFS_MMAP_4K -static unsigned long spufs_cntl_mmap_nopfn(struct vm_area_struct *vma, - unsigned long address) +static int spufs_cntl_mmap_fault(struct vm_area_struct *vma, + struct vm_fault *vmf) { - return spufs_ps_nopfn(vma, address, 0x4000, 0x1000); + return spufs_ps_fault(vma, vmf, 0x4000, 0x1000); } static struct vm_operations_struct spufs_cntl_mmap_vmops = { - .nopfn = spufs_cntl_mmap_nopfn, + .fault = spufs_cntl_mmap_fault, }; /* @@ -1097,23 +1099,23 @@ static ssize_t spufs_signal1_write(struct file *file, const char __user *buf, return 4; } -static unsigned long spufs_signal1_mmap_nopfn(struct vm_area_struct *vma, - unsigned long address) +static int +spufs_signal1_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { #if PAGE_SIZE == 0x1000 - return spufs_ps_nopfn(vma, address, 0x14000, 0x1000); + return spufs_ps_fault(vma, vmf, 0x14000, 0x1000); #elif PAGE_SIZE == 0x10000 /* For 64k pages, both signal1 and signal2 can be used to mmap the whole * signal 1 and 2 area */ - return spufs_ps_nopfn(vma, address, 0x10000, 0x10000); + return spufs_ps_fault(vma, vmf, 0x10000, 0x10000); #else #error unsupported page size #endif } static struct vm_operations_struct spufs_signal1_mmap_vmops = { - .nopfn = spufs_signal1_mmap_nopfn, + .fault = spufs_signal1_mmap_fault, }; static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) @@ -1234,23 +1236,23 @@ static ssize_t spufs_signal2_write(struct file *file, const char __user *buf, } #if SPUFS_MMAP_4K -static unsigned long spufs_signal2_mmap_nopfn(struct vm_area_struct *vma, - unsigned long address) +static int +spufs_signal2_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { #if PAGE_SIZE == 0x1000 - return spufs_ps_nopfn(vma, address, 0x1c000, 0x1000); + return spufs_ps_fault(vma, vmf, 0x1c000, 0x1000); #elif PAGE_SIZE == 0x10000 /* For 64k pages, both signal1 and signal2 can be used to mmap the whole * signal 1 and 2 area */ - return spufs_ps_nopfn(vma, address, 0x10000, 0x10000); + return spufs_ps_fault(vma, vmf, 0x10000, 0x10000); #else #error unsupported page size #endif } static struct vm_operations_struct spufs_signal2_mmap_vmops = { - .nopfn = spufs_signal2_mmap_nopfn, + .fault = spufs_signal2_mmap_fault, }; static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) @@ -1362,14 +1364,14 @@ DEFINE_SPUFS_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get, spufs_signal2_type_set, "%llu\n", SPU_ATTR_ACQUIRE); #if SPUFS_MMAP_4K -static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma, - unsigned long address) +static int +spufs_mss_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { - return spufs_ps_nopfn(vma, address, 0x0000, 0x1000); + return spufs_ps_fault(vma, vmf, 0x0000, 0x1000); } static struct vm_operations_struct spufs_mss_mmap_vmops = { - .nopfn = spufs_mss_mmap_nopfn, + .fault = spufs_mss_mmap_fault, }; /* @@ -1424,14 +1426,14 @@ static const struct file_operations spufs_mss_fops = { .mmap = spufs_mss_mmap, }; -static unsigned long spufs_psmap_mmap_nopfn(struct vm_area_struct *vma, - unsigned long address) +static int +spufs_psmap_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { - return spufs_ps_nopfn(vma, address, 0x0000, 0x20000); + return spufs_ps_fault(vma, vmf, 0x0000, 0x20000); } static struct vm_operations_struct spufs_psmap_mmap_vmops = { - .nopfn = spufs_psmap_mmap_nopfn, + .fault = spufs_psmap_mmap_fault, }; /* @@ -1484,14 +1486,14 @@ static const struct file_operations spufs_psmap_fops = { #if SPUFS_MMAP_4K -static unsigned long spufs_mfc_mmap_nopfn(struct vm_area_struct *vma, - unsigned long address) +static int +spufs_mfc_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { - return spufs_ps_nopfn(vma, address, 0x3000, 0x1000); + return spufs_ps_fault(vma, vmf, 0x3000, 0x1000); } static struct vm_operations_struct spufs_mfc_mmap_vmops = { - .nopfn = spufs_mfc_mmap_nopfn, + .fault = spufs_mfc_mmap_fault, }; /* diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c index 53202422ba72..8c0e95766a62 100644 --- a/arch/powerpc/platforms/cell/spufs/sputrace.c +++ b/arch/powerpc/platforms/cell/spufs/sputrace.c @@ -182,10 +182,10 @@ struct spu_probe spu_probes[] = { { "spu_yield__enter", "ctx %p", spu_context_nospu_event }, { "spu_deactivate__enter", "ctx %p", spu_context_nospu_event }, { "__spu_deactivate__unload", "ctx %p spu %p", spu_context_event }, - { "spufs_ps_nopfn__enter", "ctx %p", spu_context_nospu_event }, - { "spufs_ps_nopfn__sleep", "ctx %p", spu_context_nospu_event }, - { "spufs_ps_nopfn__wake", "ctx %p spu %p", spu_context_event }, - { "spufs_ps_nopfn__insert", "ctx %p spu %p", spu_context_event }, + { "spufs_ps_fault__enter", "ctx %p", spu_context_nospu_event }, + { "spufs_ps_fault__sleep", "ctx %p", spu_context_nospu_event }, + { "spufs_ps_fault__wake", "ctx %p spu %p", spu_context_event }, + { "spufs_ps_fault__insert", "ctx %p spu %p", spu_context_event }, { "spu_acquire_saved__enter", "ctx %p", spu_context_nospu_event }, { "destroy_spu_context__enter", "ctx %p", spu_context_nospu_event }, { "spufs_stop_callback__enter", "ctx %p spu %p", spu_context_event }, -- cgit v1.2.3 From 1baaeea00594776978d875a0f618591056a3705a Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Tue, 10 Jun 2008 09:26:08 +1000 Subject: macintosh/therm_windtunnel: Convert semaphore to mutex Signed-off-by: Daniel Walker Signed-off-by: Andrew Morton Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- drivers/macintosh/therm_windtunnel.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index 6d9e7ac7122b..3da0a02efd76 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -62,7 +62,7 @@ static struct { volatile int running; struct task_struct *poll_task; - struct semaphore lock; + struct mutex lock; struct of_device *of_dev; struct i2c_client *thermostat; @@ -286,23 +286,23 @@ restore_regs( void ) static int control_loop(void *dummy) { - down(&x.lock); + mutex_lock(&x.lock); setup_hardware(); - up(&x.lock); + mutex_unlock(&x.lock); for (;;) { msleep_interruptible(8000); if (kthread_should_stop()) break; - down(&x.lock); + mutex_lock(&x.lock); poll_temp(); - up(&x.lock); + mutex_unlock(&x.lock); } - down(&x.lock); + mutex_lock(&x.lock); restore_regs(); - up(&x.lock); + mutex_unlock(&x.lock); return 0; } @@ -489,7 +489,7 @@ g4fan_init( void ) const struct apple_thermal_info *info; struct device_node *np; - init_MUTEX( &x.lock ); + mutex_init(&x.lock); if( !(np=of_find_node_by_name(NULL, "power-mgt")) ) return -ENODEV; -- cgit v1.2.3 From 9a24729d8aeef967eac7af71c6a69edc83d06558 Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Tue, 10 Jun 2008 09:26:09 +1000 Subject: macintosh/media bay: Convert semaphore to mutex Signed-off-by: Daniel Walker Signed-off-by: Andrew Morton Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- drivers/macintosh/mediabay.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index 818aba368541..b1e5b4705250 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -77,7 +78,7 @@ struct media_bay_info { int index; int cached_gpio; int sleeping; - struct semaphore lock; + struct mutex lock; #ifdef CONFIG_BLK_DEV_IDE_PMAC ide_hwif_t *cd_port; void __iomem *cd_base; @@ -459,27 +460,27 @@ int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base, if (bay->mdev && which_bay == bay->mdev->ofdev.node) { int timeout = 5000, index = hwif->index; - down(&bay->lock); + mutex_lock(&bay->lock); bay->cd_port = hwif; bay->cd_base = (void __iomem *) base; bay->cd_irq = irq; if ((MB_CD != bay->content_id) || bay->state != mb_up) { - up(&bay->lock); + mutex_unlock(&bay->lock); return 0; } printk(KERN_DEBUG "Registered ide%d for media bay %d\n", index, i); do { if (MB_IDE_READY(i)) { bay->cd_index = index; - up(&bay->lock); + mutex_unlock(&bay->lock); return 0; } mdelay(1); } while(--timeout); printk(KERN_DEBUG "Timeount waiting IDE in bay %d\n", i); - up(&bay->lock); + mutex_unlock(&bay->lock); return -ENODEV; } } @@ -617,10 +618,10 @@ static int media_bay_task(void *x) while (!kthread_should_stop()) { for (i = 0; i < media_bay_count; ++i) { - down(&media_bays[i].lock); + mutex_lock(&media_bays[i].lock); if (!media_bays[i].sleeping) media_bay_step(i); - up(&media_bays[i].lock); + mutex_unlock(&media_bays[i].lock); } msleep_interruptible(MB_POLL_DELAY); @@ -660,7 +661,7 @@ static int __devinit media_bay_attach(struct macio_dev *mdev, const struct of_de bay->index = i; bay->ops = match->data; bay->sleeping = 0; - init_MUTEX(&bay->lock); + mutex_init(&bay->lock); /* Init HW probing */ if (bay->ops->init) @@ -698,10 +699,10 @@ static int media_bay_suspend(struct macio_dev *mdev, pm_message_t state) if (state.event != mdev->ofdev.dev.power.power_state.event && (state.event & PM_EVENT_SLEEP)) { - down(&bay->lock); + mutex_lock(&bay->lock); bay->sleeping = 1; set_mb_power(bay, 0); - up(&bay->lock); + mutex_unlock(&bay->lock); msleep(MB_POLL_DELAY); mdev->ofdev.dev.power.power_state = state; } @@ -720,12 +721,12 @@ static int media_bay_resume(struct macio_dev *mdev) they seem to help the 3400 get it right. */ /* Force MB power to 0 */ - down(&bay->lock); + mutex_lock(&bay->lock); set_mb_power(bay, 0); msleep(MB_POWER_DELAY); if (bay->ops->content(bay) != bay->content_id) { printk("mediabay%d: content changed during sleep...\n", bay->index); - up(&bay->lock); + mutex_unlock(&bay->lock); return 0; } set_mb_power(bay, 1); @@ -741,7 +742,7 @@ static int media_bay_resume(struct macio_dev *mdev) } while((bay->state != mb_empty) && (bay->state != mb_up)); bay->sleeping = 0; - up(&bay->lock); + mutex_unlock(&bay->lock); } return 0; } -- cgit v1.2.3 From ff1f4ee94c3c4480b9cee95da2d19668262636c6 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 11 Jun 2008 08:31:00 +1000 Subject: powerpc: Implement OF PCI address accessors stubs for CONFIG_PCI=n To avoid "#ifdef CONFIG_PCI" in the drivers we should provide stubs in place of OF PCI address accessors. Without these stubs build breaks for drivers not strictly requiring PCI, for example CONFIG_FB_OF=y without CONFIG_PCI: LD .tmp_vmlinux1 drivers/built-in.o: In function `offb_map_reg': offb.c:(.text+0x6e7c): undefined reference to `of_get_pci_address' OF PCI IRQ accessors require pci_dev argument, so drivers using PCI IRQs should depend on CONFIG_PCI anyway. Signed-off-by: Anton Vorontsov Signed-off-by: Paul Mackerras --- include/asm-powerpc/prom.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h index 78b7b0d494c0..eb3bd2e1c7f6 100644 --- a/include/asm-powerpc/prom.h +++ b/include/asm-powerpc/prom.h @@ -212,8 +212,16 @@ extern u64 of_translate_dma_address(struct device_node *dev, */ extern const u32 *of_get_address(struct device_node *dev, int index, u64 *size, unsigned int *flags); +#ifdef CONFIG_PCI extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, unsigned int *flags); +#else +static inline const u32 *of_get_pci_address(struct device_node *dev, + int bar_no, u64 *size, unsigned int *flags) +{ + return NULL; +} +#endif /* CONFIG_PCI */ /* Get an address as a resource. Note that if your address is * a PIO address, the conversion will fail if the physical address @@ -223,8 +231,16 @@ extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, */ extern int of_address_to_resource(struct device_node *dev, int index, struct resource *r); +#ifdef CONFIG_PCI extern int of_pci_address_to_resource(struct device_node *dev, int bar, struct resource *r); +#else +static inline int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r) +{ + return -ENOSYS; +} +#endif /* CONFIG_PCI */ /* Parse the ibm,dma-window property of an OF node into the busno, phys and * size parameters. -- cgit v1.2.3 From 41743a4e34f0777f51c1cf0675b91508ba143050 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 11 Jun 2008 15:37:10 +1000 Subject: powerpc: Free a PTE bit on ppc64 with 64K pages This frees a PTE bit when using 64K pages on ppc64. This is done by getting rid of the separate _PAGE_HASHPTE bit. Instead, we just test if any of the 16 sub-page bits is set. For non-combo pages (ie. real 64K pages), we set SUB0 and the location encoding in that field. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_low_64.S | 17 ++++++++++------- arch/powerpc/mm/hugetlbpage.c | 8 +++++--- include/asm-powerpc/pgtable-4k.h | 1 + include/asm-powerpc/pgtable-64k.h | 17 +++++++++++++++-- include/asm-powerpc/pgtable-ppc64.h | 1 - 5 files changed, 31 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index 70f4c833fa32..a719f53921a5 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -388,7 +388,7 @@ _GLOBAL(__hash_page_4K) */ rlwinm r30,r4,32-9+7,31-7,31-7 /* _PAGE_RW -> _PAGE_DIRTY */ or r30,r30,r31 - ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE + ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED oris r30,r30,_PAGE_COMBO@h /* Write the linux PTE atomically (setting busy) */ stdcx. r30,0,r6 @@ -468,7 +468,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE) * go to out-of-line code to try to modify the HPTE. We look for * the bit at (1 >> (index + 32)) */ - andi. r0,r31,_PAGE_HASHPTE + rldicl. r0,r31,64-12,48 li r26,0 /* Default hidx */ beq htab_insert_pte @@ -726,11 +726,11 @@ BEGIN_FTR_SECTION bne- ht64_bail_ok END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE) /* Prepare new PTE value (turn access RW into DIRTY, then - * add BUSY,HASHPTE and ACCESSED) + * add BUSY and ACCESSED) */ rlwinm r30,r4,32-9+7,31-7,31-7 /* _PAGE_RW -> _PAGE_DIRTY */ or r30,r30,r31 - ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE + ori r30,r30,_PAGE_BUSY | _PAGE_ACCESSED /* Write the linux PTE atomically (setting busy) */ stdcx. r30,0,r6 bne- 1b @@ -798,18 +798,21 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE) /* Check if we may already be in the hashtable, in this case, we * go to out-of-line code to try to modify the HPTE */ - andi. r0,r31,_PAGE_HASHPTE + rldicl. r0,r31,64-12,48 bne ht64_modify_pte ht64_insert_pte: /* Clear hpte bits in new pte (we also clear BUSY btw) and - * add _PAGE_HASHPTE + * add _PAGE_HPTE_SUB0 */ lis r0,_PAGE_HPTEFLAGS@h ori r0,r0,_PAGE_HPTEFLAGS@l andc r30,r30,r0 +#ifdef CONFIG_PPC_64K_PAGES + oris r30,r30,_PAGE_HPTE_SUB0@h +#else ori r30,r30,_PAGE_HASHPTE - +#endif /* Phyical address in r5 */ rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT sldi r5,r5,PAGE_SHIFT diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index a02266dad215..8fa07f3f6c2b 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -458,8 +458,7 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access, old_pte = pte_val(*ptep); if (old_pte & _PAGE_BUSY) goto out; - new_pte = old_pte | _PAGE_BUSY | - _PAGE_ACCESSED | _PAGE_HASHPTE; + new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED; } while(old_pte != __cmpxchg_u64((unsigned long *)ptep, old_pte, new_pte)); @@ -499,8 +498,11 @@ repeat: HPTES_PER_GROUP) & ~0x7UL; /* clear HPTE slot informations in new PTE */ +#ifdef CONFIG_PPC_64K_PAGES + new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0; +#else new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE; - +#endif /* Add in WIMG bits */ /* XXX We should store these in the pte */ /* --BenH: I think they are ... */ diff --git a/include/asm-powerpc/pgtable-4k.h b/include/asm-powerpc/pgtable-4k.h index 818e2abc81e2..fd2090dc1dce 100644 --- a/include/asm-powerpc/pgtable-4k.h +++ b/include/asm-powerpc/pgtable-4k.h @@ -41,6 +41,7 @@ #define PGDIR_MASK (~(PGDIR_SIZE-1)) /* PTE bits */ +#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */ #define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */ #define _PAGE_GROUP_IX 0x7000 /* software: HPTE index within group */ #define _PAGE_F_SECOND _PAGE_SECONDARY diff --git a/include/asm-powerpc/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h index 1cbd6b377eea..c5007712473f 100644 --- a/include/asm-powerpc/pgtable-64k.h +++ b/include/asm-powerpc/pgtable-64k.h @@ -75,6 +75,20 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) #define _PAGE_COMBO 0x10000000 /* this is a combo 4k page */ #define _PAGE_4K_PFN 0x20000000 /* PFN is for a single 4k page */ +/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead, + * we set that to be the whole sub-bits mask. The C code will only + * test this, so a multi-bit mask will work. For combo pages, this + * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of + * all the sub bits. For real 64k pages, we now have the assembly set + * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap + * that mask. This is fine as long as the HIDX bits are never set on + * a PTE that isn't hashed, which is the case today. + * + * A little nit is for the huge page C code, which does the hashing + * in C, we need to provide which bit to use. + */ +#define _PAGE_HASHPTE _PAGE_HPTE_SUB + /* Note the full page bits must be in the same location as for normal * 4k pages as the same asssembly will be used to insert 64K pages * wether the kernel has CONFIG_PPC_64K_PAGES or not @@ -83,8 +97,7 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) #define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */ /* PTE flags to conserve for HPTE identification */ -#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_HPTE_SUB |\ - _PAGE_COMBO) +#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO) /* Shift to put page number into pte. * diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h index cc6a43ba41d0..2e48be841cc9 100644 --- a/include/asm-powerpc/pgtable-ppc64.h +++ b/include/asm-powerpc/pgtable-ppc64.h @@ -91,7 +91,6 @@ #define _PAGE_DIRTY 0x0080 /* C: page changed */ #define _PAGE_ACCESSED 0x0100 /* R: page referenced */ #define _PAGE_RW 0x0200 /* software: user write access allowed */ -#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */ #define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */ #define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT) -- cgit v1.2.3 From aee10c6145199f872bc51f811b115a4b686b2426 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 12 Jun 2008 19:14:34 +1000 Subject: powerpc: Provide dummy crash_shutdown_register When kexec is disabled, the crash_shutdown_{un,}register functions are not available in the kernel. This provides dummy inline functions for those so that the callers don't have to worry about it. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- include/asm-powerpc/kexec.h | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h index 701857bc8e24..acdcdc66f1b6 100644 --- a/include/asm-powerpc/kexec.h +++ b/include/asm-powerpc/kexec.h @@ -34,6 +34,8 @@ #ifndef __ASSEMBLY__ #include +typedef void (*crash_shutdown_t)(void); + #ifdef CONFIG_KEXEC #ifdef __powerpc64__ @@ -123,7 +125,6 @@ struct pt_regs; extern void default_machine_kexec(struct kimage *image); extern int default_machine_kexec_prepare(struct kimage *image); extern void default_machine_crash_shutdown(struct pt_regs *regs); -typedef void (*crash_shutdown_t)(void); extern int crash_shutdown_register(crash_shutdown_t handler); extern int crash_shutdown_unregister(crash_shutdown_t handler); @@ -143,6 +144,16 @@ static inline int overlaps_crashkernel(unsigned long start, unsigned long size) static inline void reserve_crashkernel(void) { ; } +static inline int crash_shutdown_register(crash_shutdown_t handler) +{ + return 0; +} + +static inline int crash_shutdown_unregister(crash_shutdown_t handler) +{ + return 0; +} + #endif /* CONFIG_KEXEC */ #endif /* ! __ASSEMBLY__ */ #endif /* __KERNEL__ */ -- cgit v1.2.3 From cf2076012f3efbd945ceea67704fe515f8d6171f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 12 Jun 2008 19:14:35 +1000 Subject: powerpc/pseries: Call pseries_kexec_setup only on pseries The pseries_kexec_setup function overwrites some ppc_md pointers, so make sure it only gets called when running on the right architecture. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/kexec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c index e9dd5fe081c9..53cbd53d8740 100644 --- a/arch/powerpc/platforms/pseries/kexec.c +++ b/arch/powerpc/platforms/pseries/kexec.c @@ -70,4 +70,4 @@ static int __init pseries_kexec_setup(void) return 0; } -__initcall(pseries_kexec_setup); +machine_device_initcall(pseries, pseries_kexec_setup); -- cgit v1.2.3 From 5acb08070dcbabf7347ad73cb8a79a145a2a5152 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 12 Jun 2008 19:14:36 +1000 Subject: powerpc/cell: Disable ptcal in case of crash kdump We need to disable ptcal before starting a new kernel after a crash, in order to avoid overwriting data in the kdump kernel. Signed-off-by: Arnd Bergmann Acked-by: Jeremy Kerr Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/cell/ras.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index 655704ad03cf..505f9b9bdf0c 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -226,6 +227,11 @@ static int cbe_ptcal_notify_reboot(struct notifier_block *nb, return cbe_ptcal_disable(); } +static void cbe_ptcal_crash_shutdown(void) +{ + cbe_ptcal_disable(); +} + static struct notifier_block cbe_ptcal_reboot_notifier = { .notifier_call = cbe_ptcal_notify_reboot }; @@ -241,12 +247,20 @@ int __init cbe_ptcal_init(void) return -ENODEV; ret = register_reboot_notifier(&cbe_ptcal_reboot_notifier); - if (ret) { - printk(KERN_ERR "Can't disable PTCAL, so not enabling\n"); - return ret; - } + if (ret) + goto out1; + + ret = crash_shutdown_register(&cbe_ptcal_crash_shutdown); + if (ret) + goto out2; return cbe_ptcal_enable(); + +out2: + unregister_reboot_notifier(&cbe_ptcal_reboot_notifier); +out1: + printk(KERN_ERR "Can't disable PTCAL, so not enabling\n"); + return ret; } arch_initcall(cbe_ptcal_init); -- cgit v1.2.3 From 36c35be332faa8ba1aaa8a237e72b9460117129d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 12 Jun 2008 19:34:39 +1000 Subject: powerpc: Increase CRASH_HANDLER_MAX There are now two potential callers of machine_crash_shutdown, so increase the limit accordingly. Signed-off-by: Arnd Bergmann Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/crash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index eae401de3f76..0a8439aafdd1 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -48,7 +48,7 @@ int crashing_cpu = -1; static cpumask_t cpus_in_crash = CPU_MASK_NONE; cpumask_t cpus_in_sr = CPU_MASK_NONE; -#define CRASH_HANDLER_MAX 1 +#define CRASH_HANDLER_MAX 2 /* NULL terminated list of shutdown handles */ static crash_shutdown_t crash_shutdown_handles[CRASH_HANDLER_MAX+1]; static DEFINE_SPINLOCK(crash_handlers_lock); -- cgit v1.2.3 From bf2737f74ffd36f43c6ed11cd2c0826e1d59ad48 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Sat, 14 Jun 2008 09:12:44 +1000 Subject: powerpc: Silly spelling fix in pgtable-ppc32 Signed-off-by: Becky Bruce Signed-off-by: Paul Mackerras --- include/asm-powerpc/pgtable-ppc32.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index c08e714d0c42..dde466bd2cea 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -620,8 +620,8 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, } /* - * 2.6 calles this without flushing the TLB entry, this is wrong - * for our hash-based implementation, we fix that up here + * 2.6 calls this without flushing the TLB entry; this is wrong + * for our hash-based implementation, we fix that up here. */ #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep) -- cgit v1.2.3 From 7c5c4325d2d911fe54db3bc14149bfa558ae0acb Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Sat, 14 Jun 2008 09:41:42 +1000 Subject: powerpc: Change BAT code to use phys_addr_t Currently, the physical address is an unsigned long, but it should be phys_addr_t in set_bat, [v/p]_mapped_by_bat. Also, create a macro that can convert a large physical address into the correct format for programming the BAT registers. Signed-off-by: Becky Bruce Signed-off-by: Paul Mackerras --- arch/powerpc/mm/mmu_decl.h | 2 +- arch/powerpc/mm/pgtable_32.c | 6 +++--- arch/powerpc/mm/ppc_mmu_32.c | 10 +++++----- include/asm-powerpc/mmu-hash32.h | 9 +++++++++ 4 files changed, 18 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index 04802252a64f..46585b7bb194 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -29,7 +29,7 @@ extern void hash_preload(struct mm_struct *mm, unsigned long ea, #ifdef CONFIG_PPC32 extern void mapin_ram(void); extern int map_page(unsigned long va, phys_addr_t pa, int flags); -extern void setbat(int index, unsigned long virt, unsigned long phys, +extern void setbat(int index, unsigned long virt, phys_addr_t phys, unsigned int size, int flags); extern void settlbcam(int index, unsigned long virt, phys_addr_t phys, unsigned int size, int flags, unsigned int pid); diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index e0ff59f21135..c7584072dfcc 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -53,9 +53,9 @@ extern void hash_page_sync(void); #endif #ifdef HAVE_BATS -extern unsigned long v_mapped_by_bats(unsigned long va); -extern unsigned long p_mapped_by_bats(unsigned long pa); -void setbat(int index, unsigned long virt, unsigned long phys, +extern phys_addr_t v_mapped_by_bats(unsigned long va); +extern unsigned long p_mapped_by_bats(phys_addr_t pa); +void setbat(int index, unsigned long virt, phys_addr_t phys, unsigned int size, int flags); #else /* !HAVE_BATS */ diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index cef9f156874b..55ec17ed8d7c 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -46,13 +46,13 @@ union ubat { /* BAT register values to be loaded */ struct batrange { /* stores address ranges mapped by BATs */ unsigned long start; unsigned long limit; - unsigned long phys; + phys_addr_t phys; } bat_addrs[8]; /* * Return PA for this VA if it is mapped by a BAT, or 0 */ -unsigned long v_mapped_by_bats(unsigned long va) +phys_addr_t v_mapped_by_bats(unsigned long va) { int b; for (b = 0; b < 4; ++b) @@ -64,7 +64,7 @@ unsigned long v_mapped_by_bats(unsigned long va) /* * Return VA for a given PA or 0 if not mapped */ -unsigned long p_mapped_by_bats(unsigned long pa) +unsigned long p_mapped_by_bats(phys_addr_t pa) { int b; for (b = 0; b < 4; ++b) @@ -119,7 +119,7 @@ unsigned long __init mmu_mapin_ram(void) * The parameters are not checked; in particular size must be a power * of 2 between 128k and 256M. */ -void __init setbat(int index, unsigned long virt, unsigned long phys, +void __init setbat(int index, unsigned long virt, phys_addr_t phys, unsigned int size, int flags) { unsigned int bl; @@ -138,7 +138,7 @@ void __init setbat(int index, unsigned long virt, unsigned long phys, | _PAGE_COHERENT | _PAGE_GUARDED); wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX; bat[1].word[0] = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */ - bat[1].word[1] = phys | wimgxpp; + bat[1].word[1] = BAT_PHYS_ADDR(phys) | wimgxpp; #ifndef CONFIG_KGDB /* want user access for breakpoints */ if (flags & _PAGE_USER) #endif diff --git a/include/asm-powerpc/mmu-hash32.h b/include/asm-powerpc/mmu-hash32.h index 6e21ca618ec3..f39ff983b381 100644 --- a/include/asm-powerpc/mmu-hash32.h +++ b/include/asm-powerpc/mmu-hash32.h @@ -28,6 +28,15 @@ #define BPP_RW 0x02 /* Read/write */ #ifndef __ASSEMBLY__ +/* Contort a phys_addr_t into the right format/bits for a BAT */ +#ifdef CONFIG_PHYS_64BIT +#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \ + ((x & 0x0000000e00000000ULL) >> 24) | \ + ((x & 0x0000000100000000ULL) >> 30))) +#else +#define BAT_PHYS_ADDR(x) (x) +#endif + struct ppc_bat { struct { unsigned long bepi:15; /* Effective page index (virtual address) */ -- cgit v1.2.3 From 316a405841cc03723d401b098d188aa4e3daa69b Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Sat, 14 Jun 2008 09:41:43 +1000 Subject: powerpc: Get rid of bitfields in ppc_bat struct While working on the 36-bit physical support, I noticed that there was exactly one line of code that actually referenced the bitfields. So I got rid of them and redefined ppc_bat as a struct of 2 u32's: batu and batl. I also got rid of the previous union that held the bitfield structs and a word representation of the batu/l values. This seems like a nicer solution than adding in a bunch of new bitfields to support extended bat addressing that would never get used, and just leaving the struct as-is would have been incomplete in the face of large physical addressing. Signed-off-by: Becky Bruce Signed-off-by: Paul Mackerras --- arch/powerpc/mm/ppc_mmu_32.c | 19 ++++++++----------- include/asm-powerpc/mmu-hash32.h | 19 ++----------------- 2 files changed, 10 insertions(+), 28 deletions(-) diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index 55ec17ed8d7c..c53145f61942 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -38,10 +38,7 @@ struct hash_pte *Hash, *Hash_end; unsigned long Hash_size, Hash_mask; unsigned long _SDR1; -union ubat { /* BAT register values to be loaded */ - struct ppc_bat bat; - u32 word[2]; -} BATS[8][2]; /* 8 pairs of IBAT, DBAT */ +struct ppc_bat BATS[8][2]; /* 8 pairs of IBAT, DBAT */ struct batrange { /* stores address ranges mapped by BATs */ unsigned long start; @@ -124,7 +121,7 @@ void __init setbat(int index, unsigned long virt, phys_addr_t phys, { unsigned int bl; int wimgxpp; - union ubat *bat = BATS[index]; + struct ppc_bat *bat = BATS[index]; if (((flags & _PAGE_NO_CACHE) == 0) && cpu_has_feature(CPU_FTR_NEED_COHERENT)) @@ -137,15 +134,15 @@ void __init setbat(int index, unsigned long virt, phys_addr_t phys, wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT | _PAGE_GUARDED); wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX; - bat[1].word[0] = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */ - bat[1].word[1] = BAT_PHYS_ADDR(phys) | wimgxpp; + bat[1].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */ + bat[1].batl = BAT_PHYS_ADDR(phys) | wimgxpp; #ifndef CONFIG_KGDB /* want user access for breakpoints */ if (flags & _PAGE_USER) #endif - bat[1].bat.batu.vp = 1; + bat[1].batu |= 1; /* Vp = 1 */ if (flags & _PAGE_GUARDED) { /* G bit must be zero in IBATs */ - bat[0].word[0] = bat[0].word[1] = 0; + bat[0].batu = bat[0].batl = 0; } else { /* make IBAT same as DBAT */ bat[0] = bat[1]; @@ -158,8 +155,8 @@ void __init setbat(int index, unsigned long virt, phys_addr_t phys, | _PAGE_COHERENT); wimgxpp |= (flags & _PAGE_RW)? ((flags & _PAGE_USER)? PP_RWRW: PP_RWXX): PP_RXRX; - bat->word[0] = virt | wimgxpp | 4; /* Ks=0, Ku=1 */ - bat->word[1] = phys | bl | 0x40; /* V=1 */ + bat->batu = virt | wimgxpp | 4; /* Ks=0, Ku=1 */ + bat->batl = phys | bl | 0x40; /* V=1 */ } bat_addrs[index].start = virt; diff --git a/include/asm-powerpc/mmu-hash32.h b/include/asm-powerpc/mmu-hash32.h index f39ff983b381..16b1a1e77e64 100644 --- a/include/asm-powerpc/mmu-hash32.h +++ b/include/asm-powerpc/mmu-hash32.h @@ -38,23 +38,8 @@ #endif struct ppc_bat { - struct { - unsigned long bepi:15; /* Effective page index (virtual address) */ - unsigned long :4; /* Unused */ - unsigned long bl:11; /* Block size mask */ - unsigned long vs:1; /* Supervisor valid */ - unsigned long vp:1; /* User valid */ - } batu; /* Upper register */ - struct { - unsigned long brpn:15; /* Real page index (physical address) */ - unsigned long :10; /* Unused */ - unsigned long w:1; /* Write-thru cache */ - unsigned long i:1; /* Cache inhibit */ - unsigned long m:1; /* Memory coherence */ - unsigned long g:1; /* Guarded (MBZ in IBAT) */ - unsigned long :1; /* Unused */ - unsigned long pp:2; /* Page access protections */ - } batl; /* Lower register */ + u32 batu; + u32 batl; }; #endif /* !__ASSEMBLY__ */ -- cgit v1.2.3 From e2d755051129c61a9f67bf752d0b7cc82b115338 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 18 Jun 2008 02:59:59 +1000 Subject: powerpc: Fix copy-and-paste error in clrsetbits_le16 This was pointed out by Detlev Zundel when this code was being added to U-boot. Signed-off-by: Scott Wood Signed-off-by: Paul Mackerras --- include/asm-powerpc/io.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index 6db422d8e2a0..8b627823f5f9 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -772,7 +772,7 @@ static inline void * bus_to_virt(unsigned long address) #define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) #define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) -#define clrsetbits_le16(addr, clear, set) clrsetbits(le32, addr, clear, set) +#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) -- cgit v1.2.3 From e952e6c4d6635b36c212c056a9427bd93460178c Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 18 Jun 2008 10:47:26 +1000 Subject: powerpc: Add cputable entry for POWER7 Add a cputable entry for the POWER7 processor. Also tell firmware that we know about POWER7. Signed-off-by: Michael Neuling Signed-off-by: Joel Schopp Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cputable.c | 25 +++++++++++++++++++++++++ arch/powerpc/kernel/misc.S | 5 +++++ arch/powerpc/kernel/prom_init.c | 1 + include/asm-powerpc/cputable.h | 12 ++++++++++-- 4 files changed, 41 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index f247fc6ad12d..d8d669308403 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -53,6 +53,8 @@ extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec); extern void __restore_cpu_pa6t(void); extern void __restore_cpu_ppc970(void); +extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec); +extern void __restore_cpu_power7(void); #endif /* CONFIG_PPC64 */ /* This table only contains "desktop" CPUs, it need to be filled with embedded @@ -69,6 +71,9 @@ extern void __restore_cpu_ppc970(void); #define COMMON_USER_POWER6 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\ PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \ PPC_FEATURE_TRUE_LE) +#define COMMON_USER_POWER7 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_06 |\ + PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \ + PPC_FEATURE_TRUE_LE) #define COMMON_USER_PA6T (COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\ PPC_FEATURE_TRUE_LE | \ PPC_FEATURE_HAS_ALTIVEC_COMP) @@ -381,6 +386,26 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_generic, .platform = "power6", }, + { /* Power7 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x003f0000, + .cpu_name = "POWER7", + .cpu_features = CPU_FTRS_POWER7, + .cpu_user_features = COMMON_USER_POWER7, + .icache_bsize = 128, + .dcache_bsize = 128, + .num_pmcs = 6, + .pmc_type = PPC_PMC_IBM, + .cpu_setup = __setup_cpu_power7, + .cpu_restore = __restore_cpu_power7, + .oprofile_cpu_type = "ppc64/power7", + .oprofile_type = PPC_OPROFILE_POWER4, + .oprofile_mmcra_sihv = POWER6_MMCRA_SIHV, + .oprofile_mmcra_sipr = POWER6_MMCRA_SIPR, + .oprofile_mmcra_clear = POWER6_MMCRA_THRM | + POWER6_MMCRA_OTHER, + .platform = "power7", + }, { /* Cell Broadband Engine */ .pvr_mask = 0xffff0000, .pvr_value = 0x00700000, diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S index 7b9160220698..85cb6f340846 100644 --- a/arch/powerpc/kernel/misc.S +++ b/arch/powerpc/kernel/misc.S @@ -116,3 +116,8 @@ _GLOBAL(longjmp) mtlr r0 mr r3,r4 blr + +_GLOBAL(__setup_cpu_power7) +_GLOBAL(__restore_cpu_power7) + /* place holder */ + blr diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 6d6df1e60325..7585ed181ff8 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -650,6 +650,7 @@ static void __init early_cmdline_parse(void) static unsigned char ibm_architecture_vec[] = { W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */ W(0xffff0000), W(0x003e0000), /* POWER6 */ + W(0xffff0000), W(0x003f0000), /* POWER7 */ W(0xffffffff), W(0x0f000002), /* all 2.05-compliant */ W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */ 5 - 1, /* 5 option vectors */ diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 9106113ae0b5..3e5b2deafe44 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -26,6 +26,7 @@ #define PPC_FEATURE_PA6T 0x00000800 #define PPC_FEATURE_HAS_DFP 0x00000400 #define PPC_FEATURE_POWER6_EXT 0x00000200 +#define PPC_FEATURE_ARCH_2_06 0x00000100 #define PPC_FEATURE_TRUE_LE 0x00000002 #define PPC_FEATURE_PPC_LE 0x00000001 @@ -379,6 +380,12 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ CPU_FTR_DSCR) +#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR) #define CPU_FTRS_CELL (CPU_FTR_USE_TB | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ @@ -394,7 +401,8 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTRS_POSSIBLE \ (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \ CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \ - CPU_FTRS_CELL | CPU_FTRS_PA6T | CPU_FTR_1T_SEGMENT) + CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \ + CPU_FTR_1T_SEGMENT) #else enum { CPU_FTRS_POSSIBLE = @@ -434,7 +442,7 @@ enum { #define CPU_FTRS_ALWAYS \ (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \ CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \ - CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE) + CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE) #else enum { CPU_FTRS_ALWAYS = -- cgit v1.2.3 From 11dbc963a8f6128595d0f6ecf138dc369e144997 Mon Sep 17 00:00:00 2001 From: TAKADA Yoshihito Date: Mon, 30 Jun 2008 13:44:45 +0900 Subject: ptrace GET/SET FPXREGS broken When I update kernel 2.6.25 from 2.6.24, gdb does not work. On 2.6.25, ptrace(PTRACE_GETFPXREGS, ...) returns ENODEV. But 2.6.24 kernel's ptrace() returns EIO. It is issue of compatibility. I attached test program as pt.c and patch for fix it. #include #include #include #include #include #include #include struct user_fxsr_struct { unsigned short cwd; unsigned short swd; unsigned short twd; unsigned short fop; long fip; long fcs; long foo; long fos; long mxcsr; long reserved; long st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */ long xmm_space[32]; /* 8*16 bytes for each XMM-reg = 128 bytes */ long padding[56]; }; int main(void) { pid_t pid; pid = fork(); switch(pid){ case -1:/* error */ break; case 0:/* child */ child(); break; default: parent(pid); break; } return 0; } int child(void) { ptrace(PTRACE_TRACEME); kill(getpid(), SIGSTOP); sleep(10); return 0; } int parent(pid_t pid) { int ret; struct user_fxsr_struct fpxregs; ret = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpxregs); if(ret < 0){ printf("%d: %s.\n", errno, strerror(errno)); } kill(pid, SIGCONT); wait(pid); return 0; } /* in the kerel, at kernel/i387.c get_fpxregs() */ Signed-off-by: Ingo Molnar --- arch/x86/kernel/i387.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index eb9ddd8efb82..95e80e5033c3 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -162,7 +162,7 @@ int xfpregs_get(struct task_struct *target, const struct user_regset *regset, int ret; if (!cpu_has_fxsr) - return -ENODEV; + return -EIO; ret = init_fpu(target); if (ret) @@ -179,7 +179,7 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset, int ret; if (!cpu_has_fxsr) - return -ENODEV; + return -EIO; ret = init_fpu(target); if (ret) -- cgit v1.2.3 From 4bbff7e408a54cce88d26191191e8bcda2a60d55 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Thu, 26 Jun 2008 09:13:48 -0400 Subject: Input: add KEY_MEDIA_REPEAT definition This patch adds the Repeat key to the input layer. The usage in the HUT is 0xBC (listed under "15.7 Transport Controls"). Signed-off-by: Dmitry Torokhov --- include/linux/input.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/input.h b/include/linux/input.h index e075c4b762fb..d150c57e5f0a 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -534,8 +534,8 @@ struct input_absinfo { #define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ #define KEY_FRAMEFORWARD 0x1b5 - #define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ +#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ #define KEY_DEL_EOL 0x1c0 #define KEY_DEL_EOS 0x1c1 -- cgit v1.2.3 From 656acd2bbc4ce7f224de499ee255698701396c48 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 26 Jun 2008 11:30:02 -0400 Subject: Input: fix locking in force-feedback core The newly added event_lock spinlock in the input core disallows sleeping and therefore using mutexes in event handlers. Convert force-feedback core to rely on event_lock instead of mutex to protect slots allocated for fore-feedback effects. The original mutex is still used to serialize uploading and erasing of effects. Reported-by: Anssi Hannula Signed-off-by: Dmitry Torokhov --- drivers/input/ff-core.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c index eebc72465fc9..4c01464ec8f3 100644 --- a/drivers/input/ff-core.c +++ b/drivers/input/ff-core.c @@ -166,8 +166,10 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect, if (ret) goto out; + spin_lock_irq(&dev->event_lock); ff->effects[id] = *effect; ff->effect_owners[id] = file; + spin_unlock_irq(&dev->event_lock); out: mutex_unlock(&ff->mutex); @@ -189,16 +191,22 @@ static int erase_effect(struct input_dev *dev, int effect_id, if (error) return error; + spin_lock_irq(&dev->event_lock); ff->playback(dev, effect_id, 0); + ff->effect_owners[effect_id] = NULL; + spin_unlock_irq(&dev->event_lock); if (ff->erase) { error = ff->erase(dev, effect_id); - if (error) + if (error) { + spin_lock_irq(&dev->event_lock); + ff->effect_owners[effect_id] = file; + spin_unlock_irq(&dev->event_lock); + return error; + } } - ff->effect_owners[effect_id] = NULL; - return 0; } @@ -263,8 +271,6 @@ int input_ff_event(struct input_dev *dev, unsigned int type, if (type != EV_FF) return 0; - mutex_lock(&ff->mutex); - switch (code) { case FF_GAIN: if (!test_bit(FF_GAIN, dev->ffbit) || value > 0xffff) @@ -286,7 +292,6 @@ int input_ff_event(struct input_dev *dev, unsigned int type, break; } - mutex_unlock(&ff->mutex); return 0; } EXPORT_SYMBOL_GPL(input_ff_event); -- cgit v1.2.3 From 08383ef29faa7fa247962e6b8662c8683e34da01 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 27 Jun 2008 15:15:12 +0100 Subject: [ARM] 5131/1: Annotate platform_secondary_init with trace_hardirqs_off This patch annotates the platform_secondary_init function in arch/arm/mach-realview/platsmp.c with trace_hardirqs_off to avoid a warning when LOCKDEP and TRACE_IRQFLAGS are enabled. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/platsmp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 3e57428affee..8e813ed57519 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -74,6 +74,8 @@ static DEFINE_SPINLOCK(boot_lock); void __cpuinit platform_secondary_init(unsigned int cpu) { + trace_hardirqs_off(); + /* * the primary core may have used a "cross call" soft interrupt * to get this processor out of WFI in the BootMonitor - make -- cgit v1.2.3 From a529b59060862b36a4dae968534e090c6c77272e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 30 Jun 2008 20:13:31 +0200 Subject: Revert "BAST: Remove old IDE driver" This reverts commit ac1623625c5818bbdf5c68973098ba386ba7a004. It was premature to remove it now, we will do it post-2.6.26. Thanks to Russell King for noticing the issue. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 7 ++++ drivers/ide/arm/Makefile | 1 + drivers/ide/arm/bast-ide.c | 90 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 98 insertions(+) create mode 100644 drivers/ide/arm/bast-ide.c diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 8e07de23d220..1607536ff5fb 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -823,6 +823,13 @@ config BLK_DEV_IDE_RAPIDE Say Y here if you want to support the Yellowstone RapIDE controller manufactured for use with Acorn computers. +config BLK_DEV_IDE_BAST + tristate "Simtec BAST / Thorcom VR1000 IDE support" + depends on ARM && (ARCH_BAST || MACH_VR1000) + help + Say Y here if you want to support the onboard IDE channels on the + Simtec BAST or the Thorcom VR1000 + config IDE_H8300 tristate "H8300 IDE support" depends on H8300 diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile index 5bc26053afa6..936e7b0237f5 100644 --- a/drivers/ide/arm/Makefile +++ b/drivers/ide/arm/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o +obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o ifeq ($(CONFIG_IDE_ARM), m) diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c new file mode 100644 index 000000000000..8e8c28104b45 --- /dev/null +++ b/drivers/ide/arm/bast-ide.c @@ -0,0 +1,90 @@ +/* + * Copyright (c) 2003-2004 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +#define DRV_NAME "bast-ide" + +static int __init bastide_register(unsigned int base, unsigned int aux, int irq) +{ + ide_hwif_t *hwif; + hw_regs_t hw; + int i; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + + memset(&hw, 0, sizeof(hw)); + + base += BAST_IDE_CS; + aux += BAST_IDE_CS; + + for (i = 0; i <= 7; i++) { + hw.io_ports_array[i] = (unsigned long)base; + base += 0x20; + } + + hw.io_ports.ctl_addr = aux + (6 * 0x20); + hw.irq = irq; + hw.chipset = ide_generic; + + hwif = ide_find_port(); + if (hwif == NULL) + goto out; + + i = hwif->index; + + ide_init_port_data(hwif, i); + ide_init_port_hw(hwif, &hw); + hwif->port_ops = NULL; + + idx[0] = i; + + ide_device_add(idx, NULL); +out: + return 0; +} + +static int __init bastide_init(void) +{ + unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS; + + /* we can treat the VR1000 and the BAST the same */ + + if (!(machine_is_bast() || machine_is_vr1000())) + return 0; + + printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n"); + + if (!request_mem_region(base, 0x400000, DRV_NAME)) { + printk(KERN_ERR "%s: resources busy\n", DRV_NAME); + return -EBUSY; + } + + bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0); + bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1); + + return 0; +} + +module_init(bastide_init); + +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver"); -- cgit v1.2.3 From 4283e1babe167e0ba856bb5d039465358e90785c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 30 Jun 2008 20:14:45 +0200 Subject: ide: fix /proc/ide/ide?/mate reporting Now that we support warm-plug mate port will be registered even if there are no devices attached to it. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 55ec7f798772..8af88bf0969b 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -76,7 +76,7 @@ static int proc_ide_read_mate ide_hwif_t *hwif = (ide_hwif_t *) data; int len; - if (hwif && hwif->mate && hwif->mate->present) + if (hwif && hwif->mate) len = sprintf(page, "%s\n", hwif->mate->name); else len = sprintf(page, "(none)\n"); -- cgit v1.2.3 From 9e95685084533d0cee1e869ecfd28de1e431f12f Mon Sep 17 00:00:00 2001 From: Sylver Bruneau Date: Mon, 23 Jun 2008 01:20:05 +0200 Subject: [ARM] Orion: initialize UART1 on Kurobox Pro/Linkstation Pro Kurobox Pro/Linkstation Pro devices use a microcontroller connected to UART1. As most of the communication with this microcontroller is done from userland (power button detection, fan speed ...), the setup file has to make UART1 available from userland. Signed-off-by: Sylver Bruneau Signed-off-by: Lennert Buytenhek --- arch/arm/mach-orion5x/kurobox_pro-setup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 37b4faa6ace7..84feac4a1fe2 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -355,6 +355,7 @@ static void __init kurobox_pro_init(void) orion5x_i2c_init(); orion5x_sata_init(&kurobox_pro_sata_data); orion5x_uart0_init(); + orion5x_uart1_init(); orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE, KUROBOX_PRO_NOR_BOOT_SIZE); -- cgit v1.2.3 From cdd3c5ec1e79f99a56a9c94f77e082e4846c7d71 Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Sat, 28 Jun 2008 12:56:49 +0200 Subject: [ARM] Orion: correctly load mv2120 RTC driver After Jean Delvare's change "i2c: Convert most new-style drivers to use module aliasing" (3760f736716f74bdc62a4ba5406934338da93eb2), loading rtc-xxx from platform code fails. Update mv2120-setup.c so that the driver is loaded correctly. Signed-off-by: Martin Michlmayr Signed-off-by: Lennert Buytenhek --- arch/arm/mach-orion5x/mv2120-setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index d838bdbc1976..f1dcad36b13c 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -133,7 +133,7 @@ static struct orion5x_mpp_mode mv2120_mpp_modes[] __initdata = { }; static struct i2c_board_info __initdata mv2120_i2c_rtc = { - I2C_BOARD_INFO("rtc-pcf8563", 0x51), + I2C_BOARD_INFO("pcf8563", 0x51), .irq = 0, }; -- cgit v1.2.3 From a10b188f195d00116f56f0049d8b17c711641fb7 Mon Sep 17 00:00:00 2001 From: Sylver Bruneau Date: Wed, 25 Jun 2008 23:41:09 +0200 Subject: [ARM] Orion: fix for tsx09-common.c compilation problem In some cases, compilation of the tsx09 common file was failing due to an incomplete list of includes. Signed-off-by: Sylver Bruneau Signed-off-by: Lennert Buytenhek --- arch/arm/mach-orion5x/tsx09-common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c index 820603919c45..83feac3147a6 100644 --- a/arch/arm/mach-orion5x/tsx09-common.c +++ b/arch/arm/mach-orion5x/tsx09-common.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include "tsx09-common.h" -- cgit v1.2.3 From 1338760329c586e0141831099e15f5c336dd9c1d Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Mon, 23 Jun 2008 01:05:08 -1100 Subject: [ARM] Kirkwood: support L2 writeback mode This patch allows booting Kirkwood with the L2 in writeback mode, by reading the WT override bit from the L2 config register and passing that into the Feroceon L2 init routine, instead of assuming that the WT override bit will always be set Signed-off-by: Saeed Bishara Signed-off-by: Lennert Buytenhek --- arch/arm/mach-kirkwood/common.c | 7 ++++++- include/asm-arm/arch-kirkwood/kirkwood.h | 3 ++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index e73384fbbba8..5938a3b33cdc 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -313,6 +313,11 @@ static char * __init kirkwood_id(void) return "unknown 88F6000 variant"; } +static int __init is_l2_writethrough(void) +{ + return !!(readl(L2_CONFIG_REG) & L2_WRITETHROUGH); +} + void __init kirkwood_init(void) { printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n", @@ -321,6 +326,6 @@ void __init kirkwood_init(void) kirkwood_setup_cpu_mbus(); #ifdef CONFIG_CACHE_FEROCEON_L2 - feroceon_l2_init(1); + feroceon_l2_init(is_l2_writethrough()); #endif } diff --git a/include/asm-arm/arch-kirkwood/kirkwood.h b/include/asm-arm/arch-kirkwood/kirkwood.h index 520250dbd8a3..bb31b315c350 100644 --- a/include/asm-arm/arch-kirkwood/kirkwood.h +++ b/include/asm-arm/arch-kirkwood/kirkwood.h @@ -49,7 +49,6 @@ #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) #define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) #define CPU_RESET 0x00000002 -//#define L2_WRITETHROUGH 0x00020000 #define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) #define SOFT_RESET_OUT_EN 0x00000004 #define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) @@ -65,6 +64,8 @@ #define IRQ_CAUSE_HIGH_OFF 0x0010 #define IRQ_MASK_HIGH_OFF 0x0014 #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) +#define L2_WRITETHROUGH 0x00000010 /* * Register Map -- cgit v1.2.3 From 7441e9cb18a1a1e5b87f516fa97b6d4abb0838e3 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Mon, 30 Jun 2008 20:18:02 +0200 Subject: x86, AMD IOMMU: disable suspend/resume with IOMMU enabled (for now) This patch disables suspend/resume on machines with AMD IOMMU enabled. Real suspend/resume support for AMD IOMMU is currently being worked on. Until this is ready it will be disabled to avoid data corruption when the IOMMU is not properly re-enabled at resume. The patch is based on a similar patch for the GART driver written by Pavel Machek. The overall driver merged into tip/master is tested with parallel disk and network loads and showed no problems in a test running for 3 days. Signed-off-by: Joerg Roedel Cc: iommu@lists.linux-foundation.org Cc: bhavna.sarathy@amd.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu_init.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 6ab8128db1cc..5d9e45c7cea2 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -654,6 +655,32 @@ static void __init enable_iommus(void) } } +/* + * Suspend/Resume support + * disable suspend until real resume implemented + */ + +static int amd_iommu_resume(struct sys_device *dev) +{ + return 0; +} + +static int amd_iommu_suspend(struct sys_device *dev, pm_message_t state) +{ + return -EINVAL; +} + +static struct sysdev_class amd_iommu_sysdev_class = { + .name = "amd_iommu", + .suspend = amd_iommu_suspend, + .resume = amd_iommu_resume, +}; + +static struct sys_device device_amd_iommu = { + .id = 0, + .cls = &amd_iommu_sysdev_class, +}; + int __init amd_iommu_init(void) { int i, ret = 0; @@ -745,6 +772,14 @@ int __init amd_iommu_init(void) if (ret) goto free; + ret = sysdev_class_register(&amd_iommu_sysdev_class); + if (ret) + goto free; + + ret = sysdev_register(&device_amd_iommu); + if (ret) + goto free; + enable_iommus(); printk(KERN_INFO "AMD IOMMU: aperture size is %d MB\n", -- cgit v1.2.3 From 80be038593dba7aa46fb24a14f0ba83e5ade0edb Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 30 Jun 2008 11:35:53 -0700 Subject: PCI: add stub for pci_set_consistent_dma_mask() When CONFIG_PCI=n, there is no stub for pci_set_consistent_dma_mask(), so add one like other similar stubs. Otherwise there can be build errors, as here: linux-next-20080630/drivers/ssb/main.c:1175: error: implicit declaration of function 'pci_set_consistent_dma_mask' Signed-off-by: Randy Dunlap Signed-off-by: Jesse Barnes --- include/linux/pci.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/linux/pci.h b/include/linux/pci.h index 76c9a4a96152..96ebaa8d80e3 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -853,6 +853,11 @@ static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask) return -EIO; } +static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) +{ + return -EIO; +} + static inline int pci_set_dma_max_seg_size(struct pci_dev *dev, unsigned int size) { -- cgit v1.2.3 From 84ebe1cdae56707b9aa1b40ae5aa7d817ba745f5 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Mon, 30 Jun 2008 12:41:30 -0700 Subject: netfilter: nf_conntrack_tcp: fixing to check the lower bound of valid ACK MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Lost connections was reported by Thomas Bätzler (running 2.6.25 kernel) on the netfilter mailing list (see the thread "Weird nat/conntrack Problem with PASV FTP upload"). He provided tcpdump recordings which helped to find a long lingering bug in conntrack. In TCP connection tracking, checking the lower bound of valid ACK could lead to mark valid packets as INVALID because: - We have got a "higher or equal" inequality, but the test checked the "higher" condition only; fixed. - If the packet contains a SACK option, it could occur that the ACK value was before the left edge of our (S)ACK "window": if a previous packet from the other party intersected the right edge of the window of the receiver, we could move forward the window parameters beyond accepting a valid ack. Therefore in this patch we check the rightmost SACK edge instead of the ACK value in the lower bound of valid (S)ACK test. Signed-off-by: Jozsef Kadlecsik Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_proto_tcp.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index ba94004fe323..271cd01d57ae 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -331,12 +331,13 @@ static unsigned int get_conntrack_index(const struct tcphdr *tcph) I. Upper bound for valid data: seq <= sender.td_maxend II. Lower bound for valid data: seq + len >= sender.td_end - receiver.td_maxwin - III. Upper bound for valid ack: sack <= receiver.td_end - IV. Lower bound for valid ack: ack >= receiver.td_end - MAXACKWINDOW + III. Upper bound for valid (s)ack: sack <= receiver.td_end + IV. Lower bound for valid (s)ack: sack >= receiver.td_end - MAXACKWINDOW - where sack is the highest right edge of sack block found in the packet. + where sack is the highest right edge of sack block found in the packet + or ack in the case of packet without SACK option. - The upper bound limit for a valid ack is not ignored - + The upper bound limit for a valid (s)ack is not ignored - we doesn't have to deal with fragments. */ @@ -606,12 +607,12 @@ static bool tcp_in_window(const struct nf_conn *ct, before(seq, sender->td_maxend + 1), after(end, sender->td_end - receiver->td_maxwin - 1), before(sack, receiver->td_end + 1), - after(ack, receiver->td_end - MAXACKWINDOW(sender))); + after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1)); if (before(seq, sender->td_maxend + 1) && after(end, sender->td_end - receiver->td_maxwin - 1) && before(sack, receiver->td_end + 1) && - after(ack, receiver->td_end - MAXACKWINDOW(sender))) { + after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1)) { /* * Take into account window scaling (RFC 1323). */ -- cgit v1.2.3 From aebb6a849cfe7d89bcacaaecc20a480dfc1180e7 Mon Sep 17 00:00:00 2001 From: Joonwoo Park Date: Mon, 30 Jun 2008 12:42:23 -0700 Subject: textsearch: fix Boyer-Moore text search bug The current logic has a bug which cannot find matching pattern, if the pattern is matched from the first character of target string. for example: pattern=abc, string=abcdefg pattern=a, string=abcdefg Searching algorithm should return 0 for those things. Signed-off-by: Joonwoo Park Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- lib/ts_bm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/ts_bm.c b/lib/ts_bm.c index d90822c378a4..4a7fce72898e 100644 --- a/lib/ts_bm.c +++ b/lib/ts_bm.c @@ -63,7 +63,7 @@ static unsigned int bm_find(struct ts_config *conf, struct ts_state *state) struct ts_bm *bm = ts_config_priv(conf); unsigned int i, text_len, consumed = state->offset; const u8 *text; - int shift = bm->patlen, bs; + int shift = bm->patlen - 1, bs; for (;;) { text_len = conf->get_next_block(consumed, &text, conf, state); -- cgit v1.2.3 From 15ea0ebc5b7305cc75189cb6b7924d0db5278e0c Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 27 Jun 2008 16:19:52 -0400 Subject: hostap: don't report useless WDS frames by default DEBUG_EXTRA is reported to the kernel log by default, but DEBUG_EXTRA2 is not. Unrelated WDS frames pollute the log unnecessarily. Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_80211_rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c index 4fd73809602e..47884c3d6578 100644 --- a/drivers/net/wireless/hostap/hostap_80211_rx.c +++ b/drivers/net/wireless/hostap/hostap_80211_rx.c @@ -551,7 +551,7 @@ hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr_4addr *hdr, hdr->addr1[2] != 0xff || hdr->addr1[3] != 0xff || hdr->addr1[4] != 0xff || hdr->addr1[5] != 0xff)) { /* RA (or BSSID) is not ours - drop */ - PDEBUG(DEBUG_EXTRA, "%s: received WDS frame with " + PDEBUG(DEBUG_EXTRA2, "%s: received WDS frame with " "not own or broadcast %s=%s\n", local->dev->name, fc & IEEE80211_FCTL_FROMDS ? "RA" : "BSSID", -- cgit v1.2.3 From 1bcca3c463e4930cef9986b05165bb0b3eb46f63 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 27 Jun 2008 16:19:58 -0400 Subject: hostap: fix sparse warnings Rewrite AID calculation in handle_pspoll() to avoid truncating bits. Make hostap_80211_header_parse() static, don't export it. Avoid shadowing variables. Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_80211_rx.c | 6 +++--- drivers/net/wireless/hostap/hostap_ap.c | 2 +- drivers/net/wireless/hostap/hostap_cs.c | 8 ++++---- drivers/net/wireless/hostap/hostap_hw.c | 10 +++++----- drivers/net/wireless/hostap/hostap_main.c | 5 ++--- 5 files changed, 15 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c index 47884c3d6578..020f450e9dba 100644 --- a/drivers/net/wireless/hostap/hostap_80211_rx.c +++ b/drivers/net/wireless/hostap/hostap_80211_rx.c @@ -64,7 +64,7 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, int hdrlen, phdrlen, head_need, tail_need; u16 fc; int prism_header, ret; - struct ieee80211_hdr_4addr *hdr; + struct ieee80211_hdr_4addr *fhdr; iface = netdev_priv(dev); local = iface->local; @@ -83,8 +83,8 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, phdrlen = 0; } - hdr = (struct ieee80211_hdr_4addr *) skb->data; - fc = le16_to_cpu(hdr->frame_ctl); + fhdr = (struct ieee80211_hdr_4addr *) skb->data; + fc = le16_to_cpu(fhdr->frame_ctl); if (type == PRISM2_RX_MGMT && (fc & IEEE80211_FCTL_VERS)) { printk(KERN_DEBUG "%s: dropped management frame with header " diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 0acd9589c48c..ab981afd481d 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -1930,7 +1930,7 @@ static void handle_pspoll(local_info_t *local, PDEBUG(DEBUG_PS, " PSPOLL and AID[15:14] not set\n"); return; } - aid &= ~BIT(15) & ~BIT(14); + aid &= ~(BIT(15) | BIT(14)); if (aid == 0 || aid > MAX_AID_TABLE_SIZE) { PDEBUG(DEBUG_PS, " invalid aid=%d\n", aid); return; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ed4317a17cbb..80039a0ae027 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -533,10 +533,10 @@ static void prism2_detach(struct pcmcia_device *link) do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) #define CFG_CHECK2(fn, retf) \ -do { int ret = (retf); \ -if (ret != 0) { \ - PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", ret); \ - cs_error(link, fn, ret); \ +do { int _ret = (retf); \ +if (_ret != 0) { \ + PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \ + cs_error(link, fn, _ret); \ goto next_entry; \ } \ } while (0) diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index cdf90c40f11b..936f52e3d95c 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -2835,7 +2835,7 @@ static void hostap_passive_scan(unsigned long data) { local_info_t *local = (local_info_t *) data; struct net_device *dev = local->dev; - u16 channel; + u16 chan; if (local->passive_scan_interval <= 0) return; @@ -2872,11 +2872,11 @@ static void hostap_passive_scan(unsigned long data) printk(KERN_DEBUG "%s: passive scan channel %d\n", dev->name, local->passive_scan_channel); - channel = local->passive_scan_channel; + chan = local->passive_scan_channel; local->passive_scan_state = PASSIVE_SCAN_WAIT; local->passive_scan_timer.expires = jiffies + HZ / 10; } else { - channel = local->channel; + chan = local->channel; local->passive_scan_state = PASSIVE_SCAN_LISTEN; local->passive_scan_timer.expires = jiffies + local->passive_scan_interval * HZ; @@ -2884,9 +2884,9 @@ static void hostap_passive_scan(unsigned long data) if (hfa384x_cmd_callback(dev, HFA384X_CMDCODE_TEST | (HFA384X_TEST_CHANGE_CHANNEL << 8), - channel, NULL, 0)) + chan, NULL, 0)) printk(KERN_ERR "%s: passive scan channel set %d " - "failed\n", dev->name, channel); + "failed\n", dev->name, chan); add_timer(&local->passive_scan_timer); } diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c index f7aec9309d04..a38e85f334df 100644 --- a/drivers/net/wireless/hostap/hostap_main.c +++ b/drivers/net/wireless/hostap/hostap_main.c @@ -594,7 +594,8 @@ void hostap_dump_tx_header(const char *name, const struct hfa384x_tx_frame *tx) } -int hostap_80211_header_parse(const struct sk_buff *skb, unsigned char *haddr) +static int hostap_80211_header_parse(const struct sk_buff *skb, + unsigned char *haddr) { struct hostap_interface *iface = netdev_priv(skb->dev); local_info_t *local = iface->local; @@ -857,7 +858,6 @@ const struct header_ops hostap_80211_ops = { .rebuild = eth_rebuild_header, .cache = eth_header_cache, .cache_update = eth_header_cache_update, - .parse = hostap_80211_header_parse, }; EXPORT_SYMBOL(hostap_80211_ops); @@ -1150,7 +1150,6 @@ EXPORT_SYMBOL(hostap_set_roaming); EXPORT_SYMBOL(hostap_set_auth_algs); EXPORT_SYMBOL(hostap_dump_rx_header); EXPORT_SYMBOL(hostap_dump_tx_header); -EXPORT_SYMBOL(hostap_80211_header_parse); EXPORT_SYMBOL(hostap_80211_get_hdrlen); EXPORT_SYMBOL(hostap_get_stats); EXPORT_SYMBOL(hostap_setup_dev); -- cgit v1.2.3 From 23976efedd5ecb420b87455787c537eb4aed1981 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sat, 28 Jun 2008 02:50:13 +0300 Subject: mac80211: don't accept WEP keys other than WEP40 and WEP104 This patch makes mac80211 refuse a WEP key whose length is not WEP40 nor WEP104. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- include/net/mac80211.h | 9 +++++++++ net/mac80211/wext.c | 7 +++++++ 2 files changed, 16 insertions(+) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index dae3f9ec1154..bcd1623245cb 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -595,6 +595,15 @@ enum ieee80211_key_alg { ALG_CCMP, }; +/** + * enum ieee80211_key_len - key length + * @WEP40: WEP 5 byte long key + * @WEP104: WEP 13 byte long key + */ +enum ieee80211_key_len { + LEN_WEP40 = 5, + LEN_WEP104 = 13, +}; /** * enum ieee80211_key_flags - key flags diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 6106cb79060c..e8404212ad57 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -95,6 +95,13 @@ static int ieee80211_set_encryption(struct net_device *dev, u8 *sta_addr, } } + if (alg == ALG_WEP && + key_len != LEN_WEP40 && key_len != LEN_WEP104) { + ieee80211_key_free(key); + err = -EINVAL; + goto out_unlock; + } + ieee80211_key_link(key, sdata, sta); if (set_tx_key || (!sta && !sdata->default_key && key)) -- cgit v1.2.3 From da01bba3cb8814b17d809e09c301e1dad86fec87 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 26 Jun 2008 17:12:50 +0200 Subject: [ARM] Orion: make PCI handling code deal with Cardbus slots The Cardbus connector does not have an IDSEL signal, and Cardbus cards are always the intended target of configuration transactions on their local PCI bus. This means that if the Orion's PCI bus signals are hooked up to a Cardbus slot, the same set of PCI functions will will appear 31 times, for each of the PCI device IDs 1-31 (ID 0 is the host bridge). This patch adds a function to the Orion PCI handling code that board support code can call to enable Cardbus mode. When Cardbus mode is enabled, configuration transactions on the PCI local bus are only allowed to PCI IDs 0 (host bridge) and 1 (cardbus device). Signed-off-by: Lennert Buytenhek --- arch/arm/mach-orion5x/common.h | 1 + arch/arm/mach-orion5x/pci.c | 36 +++++++++++++++++++++++++++++------- 2 files changed, 30 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 97db8d88f3db..f72cf0e77544 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -40,6 +40,7 @@ struct pci_bus; struct pci_sys_data; void orion5x_pcie_id(u32 *dev, u32 *rev); +void orion5x_pci_set_cardbus_mode(void); int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin); diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 025ef63b1ddb..256a4f680935 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -266,6 +266,8 @@ static int __init pcie_setup(struct pci_sys_data *sys) */ static DEFINE_SPINLOCK(orion5x_pci_lock); +static int orion5x_pci_cardbus_mode; + static int orion5x_pci_local_bus_nr(void) { u32 conf = readl(PCI_P2P_CONF); @@ -321,14 +323,30 @@ static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func, return ret; } +static int orion5x_pci_valid_config(int bus, u32 devfn) +{ + if (bus == orion5x_pci_local_bus_nr()) { + /* + * Don't go out for local device + */ + if (PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) + return 0; + + /* + * When the PCI signals are directly connected to a + * Cardbus slot, ignore all but device IDs 0 and 1. + */ + if (orion5x_pci_cardbus_mode && PCI_SLOT(devfn) > 1) + return 0; + } + + return 1; +} + static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn, int where, int size, u32 *val) { - /* - * Don't go out for local device - */ - if (bus->number == orion5x_pci_local_bus_nr() && - PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) { + if (!orion5x_pci_valid_config(bus->number, devfn)) { *val = 0xffffffff; return PCIBIOS_DEVICE_NOT_FOUND; } @@ -340,8 +358,7 @@ static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn, static int orion5x_pci_wr_conf(struct pci_bus *bus, u32 devfn, int where, int size, u32 val) { - if (bus->number == orion5x_pci_local_bus_nr() && - PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) + if (!orion5x_pci_valid_config(bus->number, devfn)) return PCIBIOS_DEVICE_NOT_FOUND; return orion5x_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn), @@ -524,6 +541,11 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup); +void __init orion5x_pci_set_cardbus_mode(void) +{ + orion5x_pci_cardbus_mode = 1; +} + int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys) { int ret = 0; -- cgit v1.2.3 From 395aed6de6d063bc234a179d65d3b6d720ce589a Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Thu, 26 Jun 2008 01:39:19 +0200 Subject: [ARM] Orion: enable all currently supported boards in defconfig Signed-off-by: Imre Kaloz Signed-off-by: Lennert Buytenhek --- arch/arm/configs/orion5x_defconfig | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 5e34438c8fc2..8a7cabfae574 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -166,6 +166,14 @@ CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y CONFIG_MACH_TS209=y CONFIG_MACH_LINKSTATION_PRO=y +CONFIG_MACH_TS409=y +CONFIG_MACH_WRT350N_V2=y +CONFIG_MACH_TS78XX=y +CONFIG_MACH_MV2120=y +CONFIG_MACH_MSS2=y +CONFIG_MACH_WNR854T=y +CONFIG_MACH_RD88F5181L_GE=y +CONFIG_MACH_RD88F5181L_FXO=y # # Boot options -- cgit v1.2.3 From f4db56ffd43a810424866fac6de9a32486415316 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Sun, 4 May 2008 19:25:52 -1100 Subject: [MTD] orion_nand: add chip_delay parameter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some SoCs need a different chip_delay value. Signed-off-by: Saeed Bishara Acked-by: Jörn Engel Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- drivers/mtd/nand/orion_nand.c | 3 +++ include/asm-arm/plat-orion/orion_nand.h | 1 + 2 files changed, 4 insertions(+) diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index 59e05a1c50cf..ee2ac3948cd8 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -85,6 +85,9 @@ static int __init orion_nand_probe(struct platform_device *pdev) nc->cmd_ctrl = orion_nand_cmd_ctrl; nc->ecc.mode = NAND_ECC_SOFT; + if (board->chip_delay) + nc->chip_delay = board->chip_delay; + if (board->width == 16) nc->options |= NAND_BUSWIDTH_16; diff --git a/include/asm-arm/plat-orion/orion_nand.h b/include/asm-arm/plat-orion/orion_nand.h index ffd3852a0dd7..ad4ce94c1998 100644 --- a/include/asm-arm/plat-orion/orion_nand.h +++ b/include/asm-arm/plat-orion/orion_nand.h @@ -18,6 +18,7 @@ struct orion_nand_data { u8 ale; /* address line number connected to ALE */ u8 cle; /* address line number connected to CLE */ u8 width; /* buswidth */ + u8 chip_delay; }; -- cgit v1.2.3 From 5b2353859f87748f0707cec57c3953022a3321f3 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Thu, 5 Jun 2008 13:19:30 +0200 Subject: [ARM] Kirkwood: use chip_delay Signed-off-by: Saeed Bishara Signed-off-by: Lennert Buytenhek --- arch/arm/mach-kirkwood/rd88f6281-setup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index fe8b242d2060..e1f8de2c74a2 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -54,6 +54,7 @@ static struct orion_nand_data rd88f6281_nand_data = { .cle = 0, .ale = 1, .width = 8, + .chip_delay = 25, }; static struct platform_device rd88f6281_nand_flash = { -- cgit v1.2.3 From c0efd232929c2cd87238de2cccdaf4e845be5b0c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 30 Jun 2008 15:04:50 -0300 Subject: V4L/DVB (8145a): USB Video Class driver This driver supports video input devices compliant with the USB Video Class specification. This means lots of currently manufactured webcams, and probably most of the future ones. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- MAINTAINERS | 8 + drivers/media/video/Kconfig | 8 + drivers/media/video/Makefile | 2 + drivers/media/video/uvc/Makefile | 3 + drivers/media/video/uvc/uvc_ctrl.c | 1256 ++++++++++++++++++++++ drivers/media/video/uvc/uvc_driver.c | 1955 ++++++++++++++++++++++++++++++++++ drivers/media/video/uvc/uvc_isight.c | 134 +++ drivers/media/video/uvc/uvc_queue.c | 477 +++++++++ drivers/media/video/uvc/uvc_status.c | 207 ++++ drivers/media/video/uvc/uvc_v4l2.c | 1105 +++++++++++++++++++ drivers/media/video/uvc/uvc_video.c | 934 ++++++++++++++++ drivers/media/video/uvc/uvcvideo.h | 796 ++++++++++++++ 12 files changed, 6885 insertions(+) create mode 100644 drivers/media/video/uvc/Makefile create mode 100644 drivers/media/video/uvc/uvc_ctrl.c create mode 100644 drivers/media/video/uvc/uvc_driver.c create mode 100644 drivers/media/video/uvc/uvc_isight.c create mode 100644 drivers/media/video/uvc/uvc_queue.c create mode 100644 drivers/media/video/uvc/uvc_status.c create mode 100644 drivers/media/video/uvc/uvc_v4l2.c create mode 100644 drivers/media/video/uvc/uvc_video.c create mode 100644 drivers/media/video/uvc/uvcvideo.h diff --git a/MAINTAINERS b/MAINTAINERS index 8f0ec46a7096..e6c06fa3290e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4314,6 +4314,14 @@ L: netdev@vger.kernel.org W: http://www.linux-usb.org/usbnet S: Maintained +USB VIDEO CLASS +P: Laurent Pinchart +M: laurent.pinchart@skynet.be +L: linx-uvc-devel@berlios.de +L: video4linux-list@redhat.com +W: http://linux-uvc.berlios.de +S: Maintained + USB W996[87]CF DRIVER P: Luca Risolia M: luca.risolia@studio.unibo.it diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 3b26fbd3e558..5ccb0aeca8cc 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -793,6 +793,14 @@ menuconfig V4L_USB_DRIVERS if V4L_USB_DRIVERS && USB +config USB_VIDEO_CLASS + tristate "USB Video Class (UVC)" + ---help--- + Support for the USB Video Class (UVC). Currently only video + input devices, such as webcams, are supported. + + For more information see: + source "drivers/media/video/pvrusb2/Kconfig" source "drivers/media/video/em28xx/Kconfig" diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index dff0d6abe917..ecbbfaab24d5 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -136,6 +136,8 @@ obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o obj-$(CONFIG_VIDEO_AU0828) += au0828/ +obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/ + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/video/uvc/Makefile b/drivers/media/video/uvc/Makefile new file mode 100644 index 000000000000..fb39bbf9b5ac --- /dev/null +++ b/drivers/media/video/uvc/Makefile @@ -0,0 +1,3 @@ +uvcvideo-objs := uvc_driver.o uvc_queue.o uvc_v4l2.o uvc_video.o uvc_ctrl.o \ + uvc_status.o uvc_isight.o +obj-$(CONFIG_USB_VIDEO_CLASS) := uvcvideo.o diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c new file mode 100644 index 000000000000..f0ee46d15540 --- /dev/null +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -0,0 +1,1256 @@ +/* + * uvc_ctrl.c -- USB Video Class driver - Controls + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "uvcvideo.h" + +#define UVC_CTRL_NDATA 2 +#define UVC_CTRL_DATA_CURRENT 0 +#define UVC_CTRL_DATA_BACKUP 1 + +/* ------------------------------------------------------------------------ + * Control, formats, ... + */ + +static struct uvc_control_info uvc_ctrls[] = { + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BRIGHTNESS_CONTROL, + .index = 0, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_CONTRAST_CONTROL, + .index = 1, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_CONTROL, + .index = 2, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SATURATION_CONTROL, + .index = 3, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SHARPNESS_CONTROL, + .index = 4, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAMMA_CONTROL, + .index = 5, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BACKLIGHT_COMPENSATION_CONTROL, + .index = 8, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAIN_CONTROL, + .index = 9, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_POWER_LINE_FREQUENCY_CONTROL, + .index = 10, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_AUTO_CONTROL, + .index = 11, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_MODE_CONTROL, + .index = 1, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_GET_RES + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_PRIORITY_CONTROL, + .index = 2, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL, + .index = 3, + .size = 4, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_ABSOLUTE_CONTROL, + .index = 5, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_AUTO_CONTROL, + .index = 17, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, + .index = 12, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, + .index = 6, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .index = 13, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .index = 7, + .size = 4, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, +}; + +static struct uvc_menu_info power_line_frequency_controls[] = { + { 0, "Disabled" }, + { 1, "50 Hz" }, + { 2, "60 Hz" }, +}; + +static struct uvc_menu_info exposure_auto_controls[] = { + { 1, "Manual Mode" }, + { 2, "Auto Mode" }, + { 4, "Shutter Priority Mode" }, + { 8, "Aperture Priority Mode" }, +}; + +static struct uvc_control_mapping uvc_ctrl_mappings[] = { + { + .id = V4L2_CID_BRIGHTNESS, + .name = "Brightness", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BRIGHTNESS_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_CONTRAST, + .name = "Contrast", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_CONTRAST_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_HUE, + .name = "Hue", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_SATURATION, + .name = "Saturation", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SATURATION_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_SHARPNESS, + .name = "Sharpness", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SHARPNESS_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_GAMMA, + .name = "Gamma", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAMMA_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_BACKLIGHT_COMPENSATION, + .name = "Backlight Compensation", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BACKLIGHT_COMPENSATION_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_GAIN, + .name = "Gain", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAIN_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .name = "Power Line Frequency", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_POWER_LINE_FREQUENCY_CONTROL, + .size = 2, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_MENU, + .data_type = UVC_CTRL_DATA_TYPE_ENUM, + .menu_info = power_line_frequency_controls, + .menu_count = ARRAY_SIZE(power_line_frequency_controls), + }, + { + .id = V4L2_CID_HUE_AUTO, + .name = "Hue, Auto", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_EXPOSURE_AUTO, + .name = "Exposure, Auto", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_MODE_CONTROL, + .size = 4, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_MENU, + .data_type = UVC_CTRL_DATA_TYPE_BITMASK, + .menu_info = exposure_auto_controls, + .menu_count = ARRAY_SIZE(exposure_auto_controls), + }, + { + .id = V4L2_CID_EXPOSURE_AUTO_PRIORITY, + .name = "Exposure, Auto Priority", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_PRIORITY_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_EXPOSURE_ABSOLUTE, + .name = "Exposure (Absolute)", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL, + .size = 32, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .name = "White Balance Temperature, Auto", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_WHITE_BALANCE_TEMPERATURE, + .name = "White Balance Temperature", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .name = "White Balance Component, Auto", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .name = "White Balance Blue Component", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_RED_BALANCE, + .name = "White Balance Red Component", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .size = 16, + .offset = 16, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_FOCUS_ABSOLUTE, + .name = "Focus (absolute)", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_ABSOLUTE_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_FOCUS_AUTO, + .name = "Focus, Auto", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, +}; + +/* ------------------------------------------------------------------------ + * Utility functions + */ + +static inline __u8 *uvc_ctrl_data(struct uvc_control *ctrl, int id) +{ + return ctrl->data + id * ctrl->info->size; +} + +static inline int uvc_get_bit(const __u8 *data, int bit) +{ + return (data[bit >> 3] >> (bit & 7)) & 1; +} + +/* Extract the bit string specified by mapping->offset and mapping->size + * from the little-endian data stored at 'data' and return the result as + * a signed 32bit integer. Sign extension will be performed if the mapping + * references a signed data type. + */ +static __s32 uvc_get_le_value(const __u8 *data, + struct uvc_control_mapping *mapping) +{ + int bits = mapping->size; + int offset = mapping->offset; + __s32 value = 0; + __u8 mask; + + data += offset / 8; + offset &= 7; + mask = ((1LL << bits) - 1) << offset; + + for (; bits > 0; data++) { + __u8 byte = *data & mask; + value |= offset > 0 ? (byte >> offset) : (byte << (-offset)); + bits -= 8 - (offset > 0 ? offset : 0); + offset -= 8; + mask = (1 << bits) - 1; + } + + /* Sign-extend the value if needed */ + if (mapping->data_type == UVC_CTRL_DATA_TYPE_SIGNED) + value |= -(value & (1 << (mapping->size - 1))); + + return value; +} + +/* Set the bit string specified by mapping->offset and mapping->size + * in the little-endian data stored at 'data' to the value 'value'. + */ +static void uvc_set_le_value(__s32 value, __u8 *data, + struct uvc_control_mapping *mapping) +{ + int bits = mapping->size; + int offset = mapping->offset; + __u8 mask; + + data += offset / 8; + offset &= 7; + + for (; bits > 0; data++) { + mask = ((1LL << bits) - 1) << offset; + *data = (*data & ~mask) | ((value << offset) & mask); + value >>= offset ? offset : 8; + bits -= 8 - offset; + offset = 0; + } +} + +/* ------------------------------------------------------------------------ + * Terminal and unit management + */ + +static const __u8 uvc_processing_guid[16] = UVC_GUID_UVC_PROCESSING; +static const __u8 uvc_camera_guid[16] = UVC_GUID_UVC_CAMERA; +static const __u8 uvc_media_transport_input_guid[16] = + UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT; + +static int uvc_entity_match_guid(struct uvc_entity *entity, __u8 guid[16]) +{ + switch (UVC_ENTITY_TYPE(entity)) { + case ITT_CAMERA: + return memcmp(uvc_camera_guid, guid, 16) == 0; + + case ITT_MEDIA_TRANSPORT_INPUT: + return memcmp(uvc_media_transport_input_guid, guid, 16) == 0; + + case VC_PROCESSING_UNIT: + return memcmp(uvc_processing_guid, guid, 16) == 0; + + case VC_EXTENSION_UNIT: + return memcmp(entity->extension.guidExtensionCode, + guid, 16) == 0; + + default: + return 0; + } +} + +/* ------------------------------------------------------------------------ + * UVC Controls + */ + +static void __uvc_find_control(struct uvc_entity *entity, __u32 v4l2_id, + struct uvc_control_mapping **mapping, struct uvc_control **control, + int next) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *map; + unsigned int i; + + if (entity == NULL) + return; + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->info == NULL) + continue; + + list_for_each_entry(map, &ctrl->info->mappings, list) { + if ((map->id == v4l2_id) && !next) { + *control = ctrl; + *mapping = map; + return; + } + + if ((*mapping == NULL || (*mapping)->id > map->id) && + (map->id > v4l2_id) && next) { + *control = ctrl; + *mapping = map; + } + } + } +} + +struct uvc_control *uvc_find_control(struct uvc_video_device *video, + __u32 v4l2_id, struct uvc_control_mapping **mapping) +{ + struct uvc_control *ctrl = NULL; + struct uvc_entity *entity; + int next = v4l2_id & V4L2_CTRL_FLAG_NEXT_CTRL; + + *mapping = NULL; + + /* Mask the query flags. */ + v4l2_id &= V4L2_CTRL_ID_MASK; + + /* Find the control. */ + __uvc_find_control(video->processing, v4l2_id, mapping, &ctrl, next); + if (ctrl && !next) + return ctrl; + + list_for_each_entry(entity, &video->iterms, chain) { + __uvc_find_control(entity, v4l2_id, mapping, &ctrl, next); + if (ctrl && !next) + return ctrl; + } + + list_for_each_entry(entity, &video->extensions, chain) { + __uvc_find_control(entity, v4l2_id, mapping, &ctrl, next); + if (ctrl && !next) + return ctrl; + } + + if (ctrl == NULL && !next) + uvc_trace(UVC_TRACE_CONTROL, "Control 0x%08x not found.\n", + v4l2_id); + + return ctrl; +} + +int uvc_query_v4l2_ctrl(struct uvc_video_device *video, + struct v4l2_queryctrl *v4l2_ctrl) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *mapping; + struct uvc_menu_info *menu; + unsigned int i; + __u8 data[8]; + int ret; + + ctrl = uvc_find_control(video, v4l2_ctrl->id, &mapping); + if (ctrl == NULL) + return -EINVAL; + + v4l2_ctrl->id = mapping->id; + v4l2_ctrl->type = mapping->v4l2_type; + strncpy(v4l2_ctrl->name, mapping->name, sizeof v4l2_ctrl->name); + v4l2_ctrl->flags = 0; + + if (!(ctrl->info->flags & UVC_CONTROL_SET_CUR)) + v4l2_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; + + if (ctrl->info->flags & UVC_CONTROL_GET_DEF) { + if ((ret = uvc_query_ctrl(video->dev, GET_DEF, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->default_value = uvc_get_le_value(data, mapping); + } + + if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) { + v4l2_ctrl->minimum = 0; + v4l2_ctrl->maximum = mapping->menu_count - 1; + v4l2_ctrl->step = 1; + + menu = mapping->menu_info; + for (i = 0; i < mapping->menu_count; ++i, ++menu) { + if (menu->value == v4l2_ctrl->default_value) { + v4l2_ctrl->default_value = i; + break; + } + } + + return 0; + } + + if (ctrl->info->flags & UVC_CONTROL_GET_MIN) { + if ((ret = uvc_query_ctrl(video->dev, GET_MIN, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->minimum = uvc_get_le_value(data, mapping); + } + if (ctrl->info->flags & UVC_CONTROL_GET_MAX) { + if ((ret = uvc_query_ctrl(video->dev, GET_MAX, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->maximum = uvc_get_le_value(data, mapping); + } + if (ctrl->info->flags & UVC_CONTROL_GET_RES) { + if ((ret = uvc_query_ctrl(video->dev, GET_RES, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->step = uvc_get_le_value(data, mapping); + } + + return 0; +} + + +/* -------------------------------------------------------------------------- + * Control transactions + * + * To make extended set operations as atomic as the hardware allows, controls + * are handled using begin/commit/rollback operations. + * + * At the beginning of a set request, uvc_ctrl_begin should be called to + * initialize the request. This function acquires the control lock. + * + * When setting a control, the new value is stored in the control data field + * at position UVC_CTRL_DATA_CURRENT. The control is then marked as dirty for + * later processing. If the UVC and V4L2 control sizes differ, the current + * value is loaded from the hardware before storing the new value in the data + * field. + * + * After processing all controls in the transaction, uvc_ctrl_commit or + * uvc_ctrl_rollback must be called to apply the pending changes to the + * hardware or revert them. When applying changes, all controls marked as + * dirty will be modified in the UVC device, and the dirty flag will be + * cleared. When reverting controls, the control data field + * UVC_CTRL_DATA_CURRENT is reverted to its previous value + * (UVC_CTRL_DATA_BACKUP) for all dirty controls. Both functions release the + * control lock. + */ +int uvc_ctrl_begin(struct uvc_video_device *video) +{ + return mutex_lock_interruptible(&video->ctrl_mutex) ? -ERESTARTSYS : 0; +} + +static int uvc_ctrl_commit_entity(struct uvc_device *dev, + struct uvc_entity *entity, int rollback) +{ + struct uvc_control *ctrl; + unsigned int i; + int ret; + + if (entity == NULL) + return 0; + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->info == NULL || !ctrl->dirty) + continue; + + if (!rollback) + ret = uvc_query_ctrl(dev, SET_CUR, ctrl->entity->id, + dev->intfnum, ctrl->info->selector, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + else + ret = 0; + + if (rollback || ret < 0) + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + ctrl->info->size); + + if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) + ctrl->loaded = 0; + + ctrl->dirty = 0; + + if (ret < 0) + return ret; + } + + return 0; +} + +int __uvc_ctrl_commit(struct uvc_video_device *video, int rollback) +{ + struct uvc_entity *entity; + int ret = 0; + + /* Find the control. */ + ret = uvc_ctrl_commit_entity(video->dev, video->processing, rollback); + if (ret < 0) + goto done; + + list_for_each_entry(entity, &video->iterms, chain) { + ret = uvc_ctrl_commit_entity(video->dev, entity, rollback); + if (ret < 0) + goto done; + } + + list_for_each_entry(entity, &video->extensions, chain) { + ret = uvc_ctrl_commit_entity(video->dev, entity, rollback); + if (ret < 0) + goto done; + } + +done: + mutex_unlock(&video->ctrl_mutex); + return ret; +} + +int uvc_ctrl_get(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *mapping; + struct uvc_menu_info *menu; + unsigned int i; + int ret; + + ctrl = uvc_find_control(video, xctrl->id, &mapping); + if (ctrl == NULL || (ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) + return -EINVAL; + + if (!ctrl->loaded) { + ret = uvc_query_ctrl(video->dev, GET_CUR, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + if (ret < 0) + return ret; + + if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0) + ctrl->loaded = 1; + } + + xctrl->value = uvc_get_le_value( + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), mapping); + + if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) { + menu = mapping->menu_info; + for (i = 0; i < mapping->menu_count; ++i, ++menu) { + if (menu->value == xctrl->value) { + xctrl->value = i; + break; + } + } + } + + return 0; +} + +int uvc_ctrl_set(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *mapping; + s32 value = xctrl->value; + int ret; + + ctrl = uvc_find_control(video, xctrl->id, &mapping); + if (ctrl == NULL || (ctrl->info->flags & UVC_CONTROL_SET_CUR) == 0) + return -EINVAL; + + if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) { + if (value < 0 || value >= mapping->menu_count) + return -EINVAL; + value = mapping->menu_info[value].value; + } + + if (!ctrl->loaded && (ctrl->info->size * 8) != mapping->size) { + if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) { + memset(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + 0, ctrl->info->size); + } else { + ret = uvc_query_ctrl(video->dev, GET_CUR, + ctrl->entity->id, video->dev->intfnum, + ctrl->info->selector, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + if (ret < 0) + return ret; + } + + if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0) + ctrl->loaded = 1; + } + + if (!ctrl->dirty) { + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + } + + uvc_set_le_value(value, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), mapping); + + ctrl->dirty = 1; + ctrl->modified = 1; + return 0; +} + +/* -------------------------------------------------------------------------- + * Dynamic controls + */ + +int uvc_xu_ctrl_query(struct uvc_video_device *video, + struct uvc_xu_control *xctrl, int set) +{ + struct uvc_entity *entity; + struct uvc_control *ctrl = NULL; + unsigned int i, found = 0; + __u8 *data; + int ret; + + /* Find the extension unit. */ + list_for_each_entry(entity, &video->extensions, chain) { + if (entity->id == xctrl->unit) + break; + } + + if (entity->id != xctrl->unit) { + uvc_trace(UVC_TRACE_CONTROL, "Extension unit %u not found.\n", + xctrl->unit); + return -EINVAL; + } + + /* Find the control. */ + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->info == NULL) + continue; + + if (ctrl->info->selector == xctrl->selector) { + found = 1; + break; + } + } + + if (!found) { + uvc_trace(UVC_TRACE_CONTROL, + "Control " UVC_GUID_FORMAT "/%u not found.\n", + UVC_GUID_ARGS(entity->extension.guidExtensionCode), + xctrl->selector); + return -EINVAL; + } + + /* Validate control data size. */ + if (ctrl->info->size != xctrl->size) + return -EINVAL; + + if ((set && !(ctrl->info->flags & UVC_CONTROL_SET_CUR)) || + (!set && !(ctrl->info->flags & UVC_CONTROL_GET_CUR))) + return -EINVAL; + + if (mutex_lock_interruptible(&video->ctrl_mutex)) + return -ERESTARTSYS; + + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + xctrl->size); + data = uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT); + + if (set && copy_from_user(data, xctrl->data, xctrl->size)) { + ret = -EFAULT; + goto out; + } + + ret = uvc_query_ctrl(video->dev, set ? SET_CUR : GET_CUR, xctrl->unit, + video->dev->intfnum, xctrl->selector, data, + xctrl->size); + if (ret < 0) + goto out; + + if (!set && copy_to_user(xctrl->data, data, xctrl->size)) { + ret = -EFAULT; + goto out; + } + +out: + if (ret) + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + xctrl->size); + + mutex_unlock(&video->ctrl_mutex); + return ret; +} + +/* -------------------------------------------------------------------------- + * Suspend/resume + */ + +/* + * Restore control values after resume, skipping controls that haven't been + * changed. + * + * TODO + * - Don't restore modified controls that are back to their default value. + * - Handle restore order (Auto-Exposure Mode should be restored before + * Exposure Time). + */ +int uvc_ctrl_resume_device(struct uvc_device *dev) +{ + struct uvc_control *ctrl; + struct uvc_entity *entity; + unsigned int i; + int ret; + + /* Walk the entities list and restore controls when possible. */ + list_for_each_entry(entity, &dev->entities, list) { + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + + if (ctrl->info == NULL || !ctrl->modified || + (ctrl->info->flags & UVC_CONTROL_RESTORE) == 0) + continue; + + printk(KERN_INFO "restoring control " UVC_GUID_FORMAT + "/%u/%u\n", UVC_GUID_ARGS(ctrl->info->entity), + ctrl->info->index, ctrl->info->selector); + ctrl->dirty = 1; + } + + ret = uvc_ctrl_commit_entity(dev, entity, 0); + if (ret < 0) + return ret; + } + + return 0; +} + +/* -------------------------------------------------------------------------- + * Control and mapping handling + */ + +static void uvc_ctrl_add_ctrl(struct uvc_device *dev, + struct uvc_control_info *info) +{ + struct uvc_entity *entity; + struct uvc_control *ctrl = NULL; + int ret, found = 0; + unsigned int i; + + list_for_each_entry(entity, &dev->entities, list) { + if (!uvc_entity_match_guid(entity, info->entity)) + continue; + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->index == info->index) { + found = 1; + break; + } + } + + if (found) + break; + } + + if (!found) + return; + + if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) { + /* Check if the device control information and length match + * the user supplied information. + */ + __u32 flags; + __le16 size; + __u8 inf; + + if ((ret = uvc_query_ctrl(dev, GET_LEN, ctrl->entity->id, + dev->intfnum, info->selector, (__u8 *)&size, 2)) < 0) { + uvc_trace(UVC_TRACE_CONTROL, "GET_LEN failed on " + "control " UVC_GUID_FORMAT "/%u (%d).\n", + UVC_GUID_ARGS(info->entity), info->selector, + ret); + return; + } + + if (info->size != le16_to_cpu(size)) { + uvc_trace(UVC_TRACE_CONTROL, "Control " UVC_GUID_FORMAT + "/%u size doesn't match user supplied " + "value.\n", UVC_GUID_ARGS(info->entity), + info->selector); + return; + } + + if ((ret = uvc_query_ctrl(dev, GET_INFO, ctrl->entity->id, + dev->intfnum, info->selector, &inf, 1)) < 0) { + uvc_trace(UVC_TRACE_CONTROL, "GET_INFO failed on " + "control " UVC_GUID_FORMAT "/%u (%d).\n", + UVC_GUID_ARGS(info->entity), info->selector, + ret); + return; + } + + flags = info->flags; + if (((flags & UVC_CONTROL_GET_CUR) && !(inf & (1 << 0))) || + ((flags & UVC_CONTROL_SET_CUR) && !(inf & (1 << 1)))) { + uvc_trace(UVC_TRACE_CONTROL, "Control " + UVC_GUID_FORMAT "/%u flags don't match " + "supported operations.\n", + UVC_GUID_ARGS(info->entity), info->selector); + return; + } + } + + ctrl->info = info; + ctrl->data = kmalloc(ctrl->info->size * UVC_CTRL_NDATA, GFP_KERNEL); + uvc_trace(UVC_TRACE_CONTROL, "Added control " UVC_GUID_FORMAT "/%u " + "to device %s entity %u\n", UVC_GUID_ARGS(ctrl->info->entity), + ctrl->info->selector, dev->udev->devpath, entity->id); +} + +/* + * Add an item to the UVC control information list, and instantiate a control + * structure for each device that supports the control. + */ +int uvc_ctrl_add_info(struct uvc_control_info *info) +{ + struct uvc_control_info *ctrl; + struct uvc_device *dev; + int ret = 0; + + /* Find matching controls by walking the devices, entities and + * controls list. + */ + mutex_lock(&uvc_driver.ctrl_mutex); + + /* First check if the list contains a control matching the new one. + * Bail out if it does. + */ + list_for_each_entry(ctrl, &uvc_driver.controls, list) { + if (memcmp(ctrl->entity, info->entity, 16)) + continue; + + if (ctrl->selector == info->selector) { + uvc_trace(UVC_TRACE_CONTROL, "Control " + UVC_GUID_FORMAT "/%u is already defined.\n", + UVC_GUID_ARGS(info->entity), info->selector); + ret = -EEXIST; + goto end; + } + if (ctrl->index == info->index) { + uvc_trace(UVC_TRACE_CONTROL, "Control " + UVC_GUID_FORMAT "/%u would overwrite index " + "%d.\n", UVC_GUID_ARGS(info->entity), + info->selector, info->index); + ret = -EEXIST; + goto end; + } + } + + list_for_each_entry(dev, &uvc_driver.devices, list) + uvc_ctrl_add_ctrl(dev, info); + + INIT_LIST_HEAD(&info->mappings); + list_add_tail(&info->list, &uvc_driver.controls); +end: + mutex_unlock(&uvc_driver.ctrl_mutex); + return ret; +} + +int uvc_ctrl_add_mapping(struct uvc_control_mapping *mapping) +{ + struct uvc_control_info *info; + struct uvc_control_mapping *map; + int ret = -EINVAL; + + if (mapping->id & ~V4L2_CTRL_ID_MASK) { + uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s' with " + "invalid control id 0x%08x\n", mapping->name, + mapping->id); + return -EINVAL; + } + + mutex_lock(&uvc_driver.ctrl_mutex); + list_for_each_entry(info, &uvc_driver.controls, list) { + if (memcmp(info->entity, mapping->entity, 16) || + info->selector != mapping->selector) + continue; + + if (info->size * 8 < mapping->size + mapping->offset) { + uvc_trace(UVC_TRACE_CONTROL, "Mapping '%s' would " + "overflow control " UVC_GUID_FORMAT "/%u\n", + mapping->name, UVC_GUID_ARGS(info->entity), + info->selector); + ret = -EOVERFLOW; + goto end; + } + + /* Check if the list contains a mapping matching the new one. + * Bail out if it does. + */ + list_for_each_entry(map, &info->mappings, list) { + if (map->id == mapping->id) { + uvc_trace(UVC_TRACE_CONTROL, "Mapping '%s' is " + "already defined.\n", mapping->name); + ret = -EEXIST; + goto end; + } + } + + mapping->ctrl = info; + list_add_tail(&mapping->list, &info->mappings); + uvc_trace(UVC_TRACE_CONTROL, "Adding mapping %s to control " + UVC_GUID_FORMAT "/%u.\n", mapping->name, + UVC_GUID_ARGS(info->entity), info->selector); + + ret = 0; + break; + } +end: + mutex_unlock(&uvc_driver.ctrl_mutex); + return ret; +} + +/* + * Initialize device controls. + */ +int uvc_ctrl_init_device(struct uvc_device *dev) +{ + struct uvc_control_info *info; + struct uvc_control *ctrl; + struct uvc_entity *entity; + unsigned int i; + + /* Walk the entities list and instantiate controls */ + list_for_each_entry(entity, &dev->entities, list) { + unsigned int bControlSize = 0, ncontrols = 0; + __u8 *bmControls = NULL; + + if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) { + bmControls = entity->extension.bmControls; + bControlSize = entity->extension.bControlSize; + } else if (UVC_ENTITY_TYPE(entity) == VC_PROCESSING_UNIT) { + bmControls = entity->processing.bmControls; + bControlSize = entity->processing.bControlSize; + } else if (UVC_ENTITY_TYPE(entity) == ITT_CAMERA) { + bmControls = entity->camera.bmControls; + bControlSize = entity->camera.bControlSize; + } + + for (i = 0; i < bControlSize; ++i) + ncontrols += hweight8(bmControls[i]); + + if (ncontrols == 0) + continue; + + entity->controls = kzalloc(ncontrols*sizeof *ctrl, GFP_KERNEL); + if (entity->controls == NULL) + return -ENOMEM; + + entity->ncontrols = ncontrols; + + ctrl = entity->controls; + for (i = 0; i < bControlSize * 8; ++i) { + if (uvc_get_bit(bmControls, i) == 0) + continue; + + ctrl->entity = entity; + ctrl->index = i; + ctrl++; + } + } + + /* Walk the controls info list and associate them with the device + * controls, then add the device to the global device list. This has + * to be done while holding the controls lock, to make sure + * uvc_ctrl_add_info() will not get called in-between. + */ + mutex_lock(&uvc_driver.ctrl_mutex); + list_for_each_entry(info, &uvc_driver.controls, list) + uvc_ctrl_add_ctrl(dev, info); + + list_add_tail(&dev->list, &uvc_driver.devices); + mutex_unlock(&uvc_driver.ctrl_mutex); + + return 0; +} + +/* + * Cleanup device controls. + */ +void uvc_ctrl_cleanup_device(struct uvc_device *dev) +{ + struct uvc_entity *entity; + unsigned int i; + + /* Remove the device from the global devices list */ + mutex_lock(&uvc_driver.ctrl_mutex); + if (dev->list.next != NULL) + list_del(&dev->list); + mutex_unlock(&uvc_driver.ctrl_mutex); + + list_for_each_entry(entity, &dev->entities, list) { + for (i = 0; i < entity->ncontrols; ++i) + kfree(entity->controls[i].data); + + kfree(entity->controls); + } +} + +void uvc_ctrl_init(void) +{ + struct uvc_control_info *ctrl = uvc_ctrls; + struct uvc_control_info *cend = ctrl + ARRAY_SIZE(uvc_ctrls); + struct uvc_control_mapping *mapping = uvc_ctrl_mappings; + struct uvc_control_mapping *mend = + mapping + ARRAY_SIZE(uvc_ctrl_mappings); + + for (; ctrl < cend; ++ctrl) + uvc_ctrl_add_info(ctrl); + + for (; mapping < mend; ++mapping) + uvc_ctrl_add_mapping(mapping); +} diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c new file mode 100644 index 000000000000..60ced589f898 --- /dev/null +++ b/drivers/media/video/uvc/uvc_driver.c @@ -0,0 +1,1955 @@ +/* + * uvc_driver.c -- USB Video Class driver + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +/* + * This driver aims to support video input devices compliant with the 'USB + * Video Class' specification. + * + * The driver doesn't support the deprecated v4l1 interface. It implements the + * mmap capture method only, and doesn't do any image format conversion in + * software. If your user-space application doesn't support YUYV or MJPEG, fix + * it :-). Please note that the MJPEG data have been stripped from their + * Huffman tables (DHT marker), you will need to add it back if your JPEG + * codec can't handle MJPEG data. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "uvcvideo.h" + +#define DRIVER_AUTHOR "Laurent Pinchart " +#define DRIVER_DESC "USB Video Class driver" +#ifndef DRIVER_VERSION +#define DRIVER_VERSION "v0.1.0" +#endif + +static unsigned int uvc_quirks_param; +unsigned int uvc_trace_param; + +/* ------------------------------------------------------------------------ + * Control, formats, ... + */ + +static struct uvc_format_desc uvc_fmts[] = { + { + .name = "YUV 4:2:2 (YUYV)", + .guid = UVC_GUID_FORMAT_YUY2, + .fcc = V4L2_PIX_FMT_YUYV, + }, + { + .name = "YUV 4:2:0 (NV12)", + .guid = UVC_GUID_FORMAT_NV12, + .fcc = V4L2_PIX_FMT_NV12, + }, + { + .name = "MJPEG", + .guid = UVC_GUID_FORMAT_MJPEG, + .fcc = V4L2_PIX_FMT_MJPEG, + }, + { + .name = "YVU 4:2:0 (YV12)", + .guid = UVC_GUID_FORMAT_YV12, + .fcc = V4L2_PIX_FMT_YVU420, + }, + { + .name = "YUV 4:2:0 (I420)", + .guid = UVC_GUID_FORMAT_I420, + .fcc = V4L2_PIX_FMT_YUV420, + }, + { + .name = "YUV 4:2:2 (UYVY)", + .guid = UVC_GUID_FORMAT_UYVY, + .fcc = V4L2_PIX_FMT_UYVY, + }, + { + .name = "Greyscale", + .guid = UVC_GUID_FORMAT_Y800, + .fcc = V4L2_PIX_FMT_GREY, + }, + { + .name = "RGB Bayer", + .guid = UVC_GUID_FORMAT_BY8, + .fcc = V4L2_PIX_FMT_SBGGR8, + }, +}; + +/* ------------------------------------------------------------------------ + * Utility functions + */ + +struct usb_host_endpoint *uvc_find_endpoint(struct usb_host_interface *alts, + __u8 epaddr) +{ + struct usb_host_endpoint *ep; + unsigned int i; + + for (i = 0; i < alts->desc.bNumEndpoints; ++i) { + ep = &alts->endpoint[i]; + if (ep->desc.bEndpointAddress == epaddr) + return ep; + } + + return NULL; +} + +static struct uvc_format_desc *uvc_format_by_guid(const __u8 guid[16]) +{ + unsigned int len = ARRAY_SIZE(uvc_fmts); + unsigned int i; + + for (i = 0; i < len; ++i) { + if (memcmp(guid, uvc_fmts[i].guid, 16) == 0) + return &uvc_fmts[i]; + } + + return NULL; +} + +static __u32 uvc_colorspace(const __u8 primaries) +{ + static const __u8 colorprimaries[] = { + 0, + V4L2_COLORSPACE_SRGB, + V4L2_COLORSPACE_470_SYSTEM_M, + V4L2_COLORSPACE_470_SYSTEM_BG, + V4L2_COLORSPACE_SMPTE170M, + V4L2_COLORSPACE_SMPTE240M, + }; + + if (primaries < ARRAY_SIZE(colorprimaries)) + return colorprimaries[primaries]; + + return 0; +} + +/* Simplify a fraction using a simple continued fraction decomposition. The + * idea here is to convert fractions such as 333333/10000000 to 1/30 using + * 32 bit arithmetic only. The algorithm is not perfect and relies upon two + * arbitrary parameters to remove non-significative terms from the simple + * continued fraction decomposition. Using 8 and 333 for n_terms and threshold + * respectively seems to give nice results. + */ +void uvc_simplify_fraction(uint32_t *numerator, uint32_t *denominator, + unsigned int n_terms, unsigned int threshold) +{ + uint32_t *an; + uint32_t x, y, r; + unsigned int i, n; + + an = kmalloc(n_terms * sizeof *an, GFP_KERNEL); + if (an == NULL) + return; + + /* Convert the fraction to a simple continued fraction. See + * http://mathforum.org/dr.math/faq/faq.fractions.html + * Stop if the current term is bigger than or equal to the given + * threshold. + */ + x = *numerator; + y = *denominator; + + for (n = 0; n < n_terms && y != 0; ++n) { + an[n] = x / y; + if (an[n] >= threshold) { + if (n < 2) + n++; + break; + } + + r = x - an[n] * y; + x = y; + y = r; + } + + /* Expand the simple continued fraction back to an integer fraction. */ + x = 0; + y = 1; + + for (i = n; i > 0; --i) { + r = y; + y = an[i-1] * y + x; + x = r; + } + + *numerator = y; + *denominator = x; + kfree(an); +} + +/* Convert a fraction to a frame interval in 100ns multiples. The idea here is + * to compute numerator / denominator * 10000000 using 32 bit fixed point + * arithmetic only. + */ +uint32_t uvc_fraction_to_interval(uint32_t numerator, uint32_t denominator) +{ + uint32_t multiplier; + + /* Saturate the result if the operation would overflow. */ + if (denominator == 0 || + numerator/denominator >= ((uint32_t)-1)/10000000) + return (uint32_t)-1; + + /* Divide both the denominator and the multiplier by two until + * numerator * multiplier doesn't overflow. If anyone knows a better + * algorithm please let me know. + */ + multiplier = 10000000; + while (numerator > ((uint32_t)-1)/multiplier) { + multiplier /= 2; + denominator /= 2; + } + + return denominator ? numerator * multiplier / denominator : 0; +} + +/* ------------------------------------------------------------------------ + * Terminal and unit management + */ + +static struct uvc_entity *uvc_entity_by_id(struct uvc_device *dev, int id) +{ + struct uvc_entity *entity; + + list_for_each_entry(entity, &dev->entities, list) { + if (entity->id == id) + return entity; + } + + return NULL; +} + +static struct uvc_entity *uvc_entity_by_reference(struct uvc_device *dev, + int id, struct uvc_entity *entity) +{ + unsigned int i; + + if (entity == NULL) + entity = list_entry(&dev->entities, struct uvc_entity, list); + + list_for_each_entry_continue(entity, &dev->entities, list) { + switch (UVC_ENTITY_TYPE(entity)) { + case TT_STREAMING: + if (entity->output.bSourceID == id) + return entity; + break; + + case VC_PROCESSING_UNIT: + if (entity->processing.bSourceID == id) + return entity; + break; + + case VC_SELECTOR_UNIT: + for (i = 0; i < entity->selector.bNrInPins; ++i) + if (entity->selector.baSourceID[i] == id) + return entity; + break; + + case VC_EXTENSION_UNIT: + for (i = 0; i < entity->extension.bNrInPins; ++i) + if (entity->extension.baSourceID[i] == id) + return entity; + break; + } + } + + return NULL; +} + +/* ------------------------------------------------------------------------ + * Descriptors handling + */ + +static int uvc_parse_format(struct uvc_device *dev, + struct uvc_streaming *streaming, struct uvc_format *format, + __u32 **intervals, unsigned char *buffer, int buflen) +{ + struct usb_interface *intf = streaming->intf; + struct usb_host_interface *alts = intf->cur_altsetting; + struct uvc_format_desc *fmtdesc; + struct uvc_frame *frame; + const unsigned char *start = buffer; + unsigned int interval; + unsigned int i, n; + __u8 ftype; + + format->type = buffer[2]; + format->index = buffer[3]; + + switch (buffer[2]) { + case VS_FORMAT_UNCOMPRESSED: + case VS_FORMAT_FRAME_BASED: + if (buflen < 27) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + /* Find the format descriptor from its GUID. */ + fmtdesc = uvc_format_by_guid(&buffer[5]); + + if (fmtdesc != NULL) { + strncpy(format->name, fmtdesc->name, + sizeof format->name); + format->fcc = fmtdesc->fcc; + } else { + uvc_printk(KERN_INFO, "Unknown video format " + UVC_GUID_FORMAT "\n", + UVC_GUID_ARGS(&buffer[5])); + snprintf(format->name, sizeof format->name, + UVC_GUID_FORMAT, UVC_GUID_ARGS(&buffer[5])); + format->fcc = 0; + } + + format->bpp = buffer[21]; + if (buffer[2] == VS_FORMAT_UNCOMPRESSED) { + ftype = VS_FRAME_UNCOMPRESSED; + } else { + ftype = VS_FRAME_FRAME_BASED; + if (buffer[27]) + format->flags = UVC_FMT_FLAG_COMPRESSED; + } + break; + + case VS_FORMAT_MJPEG: + if (buflen < 11) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + strncpy(format->name, "MJPEG", sizeof format->name); + format->fcc = V4L2_PIX_FMT_MJPEG; + format->flags = UVC_FMT_FLAG_COMPRESSED; + format->bpp = 0; + ftype = VS_FRAME_MJPEG; + break; + + case VS_FORMAT_DV: + if (buflen < 9) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + switch (buffer[8] & 0x7f) { + case 0: + strncpy(format->name, "SD-DV", sizeof format->name); + break; + case 1: + strncpy(format->name, "SDL-DV", sizeof format->name); + break; + case 2: + strncpy(format->name, "HD-DV", sizeof format->name); + break; + default: + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d: unknown DV format %u\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber, buffer[8]); + return -EINVAL; + } + + strncat(format->name, buffer[8] & (1 << 7) ? " 60Hz" : " 50Hz", + sizeof format->name); + + format->fcc = V4L2_PIX_FMT_DV; + format->flags = UVC_FMT_FLAG_COMPRESSED | UVC_FMT_FLAG_STREAM; + format->bpp = 0; + ftype = 0; + + /* Create a dummy frame descriptor. */ + frame = &format->frame[0]; + memset(&format->frame[0], 0, sizeof format->frame[0]); + frame->bFrameIntervalType = 1; + frame->dwDefaultFrameInterval = 1; + frame->dwFrameInterval = *intervals; + *(*intervals)++ = 1; + format->nframes = 1; + break; + + case VS_FORMAT_MPEG2TS: + case VS_FORMAT_STREAM_BASED: + /* Not supported yet. */ + default: + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d unsupported format %u\n", + dev->udev->devnum, alts->desc.bInterfaceNumber, + buffer[2]); + return -EINVAL; + } + + uvc_trace(UVC_TRACE_DESCR, "Found format %s.\n", format->name); + + buflen -= buffer[0]; + buffer += buffer[0]; + + /* Parse the frame descriptors. Only uncompressed, MJPEG and frame + * based formats have frame descriptors. + */ + while (buflen > 2 && buffer[2] == ftype) { + frame = &format->frame[format->nframes]; + + if (ftype != VS_FRAME_FRAME_BASED) + n = buflen > 25 ? buffer[25] : 0; + else + n = buflen > 21 ? buffer[21] : 0; + + n = n ? n : 3; + + if (buflen < 26 + 4*n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FRAME error\n", dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + frame->bFrameIndex = buffer[3]; + frame->bmCapabilities = buffer[4]; + frame->wWidth = le16_to_cpup((__le16 *)&buffer[5]); + frame->wHeight = le16_to_cpup((__le16 *)&buffer[7]); + frame->dwMinBitRate = le32_to_cpup((__le32 *)&buffer[9]); + frame->dwMaxBitRate = le32_to_cpup((__le32 *)&buffer[13]); + if (ftype != VS_FRAME_FRAME_BASED) { + frame->dwMaxVideoFrameBufferSize = + le32_to_cpup((__le32 *)&buffer[17]); + frame->dwDefaultFrameInterval = + le32_to_cpup((__le32 *)&buffer[21]); + frame->bFrameIntervalType = buffer[25]; + } else { + frame->dwMaxVideoFrameBufferSize = 0; + frame->dwDefaultFrameInterval = + le32_to_cpup((__le32 *)&buffer[17]); + frame->bFrameIntervalType = buffer[21]; + } + frame->dwFrameInterval = *intervals; + + /* Several UVC chipsets screw up dwMaxVideoFrameBufferSize + * completely. Observed behaviours range from setting the + * value to 1.1x the actual frame size of hardwiring the + * 16 low bits to 0. This results in a higher than necessary + * memory usage as well as a wrong image size information. For + * uncompressed formats this can be fixed by computing the + * value from the frame size. + */ + if (!(format->flags & UVC_FMT_FLAG_COMPRESSED)) + frame->dwMaxVideoFrameBufferSize = format->bpp + * frame->wWidth * frame->wHeight / 8; + + /* Some bogus devices report dwMinFrameInterval equal to + * dwMaxFrameInterval and have dwFrameIntervalStep set to + * zero. Setting all null intervals to 1 fixes the problem and + * some other divisions by zero which could happen. + */ + for (i = 0; i < n; ++i) { + interval = le32_to_cpup((__le32 *)&buffer[26+4*i]); + *(*intervals)++ = interval ? interval : 1; + } + + /* Make sure that the default frame interval stays between + * the boundaries. + */ + n -= frame->bFrameIntervalType ? 1 : 2; + frame->dwDefaultFrameInterval = + min(frame->dwFrameInterval[n], + max(frame->dwFrameInterval[0], + frame->dwDefaultFrameInterval)); + + uvc_trace(UVC_TRACE_DESCR, "- %ux%u (%u.%u fps)\n", + frame->wWidth, frame->wHeight, + 10000000/frame->dwDefaultFrameInterval, + (100000000/frame->dwDefaultFrameInterval)%10); + + format->nframes++; + buflen -= buffer[0]; + buffer += buffer[0]; + } + + if (buflen > 2 && buffer[2] == VS_STILL_IMAGE_FRAME) { + buflen -= buffer[0]; + buffer += buffer[0]; + } + + if (buflen > 2 && buffer[2] == VS_COLORFORMAT) { + if (buflen < 6) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d COLORFORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + format->colorspace = uvc_colorspace(buffer[3]); + + buflen -= buffer[0]; + buffer += buffer[0]; + } + + return buffer - start; +} + +static int uvc_parse_streaming(struct uvc_device *dev, + struct usb_interface *intf) +{ + struct uvc_streaming *streaming = NULL; + struct uvc_format *format; + struct uvc_frame *frame; + struct usb_host_interface *alts = &intf->altsetting[0]; + unsigned char *_buffer, *buffer = alts->extra; + int _buflen, buflen = alts->extralen; + unsigned int nformats = 0, nframes = 0, nintervals = 0; + unsigned int size, i, n, p; + __u32 *interval; + __u16 psize; + int ret = -EINVAL; + + if (intf->cur_altsetting->desc.bInterfaceSubClass + != SC_VIDEOSTREAMING) { + uvc_trace(UVC_TRACE_DESCR, "device %d interface %d isn't a " + "video streaming interface\n", dev->udev->devnum, + intf->altsetting[0].desc.bInterfaceNumber); + return -EINVAL; + } + + if (usb_driver_claim_interface(&uvc_driver.driver, intf, dev)) { + uvc_trace(UVC_TRACE_DESCR, "device %d interface %d is already " + "claimed\n", dev->udev->devnum, + intf->altsetting[0].desc.bInterfaceNumber); + return -EINVAL; + } + + streaming = kzalloc(sizeof *streaming, GFP_KERNEL); + if (streaming == NULL) { + usb_driver_release_interface(&uvc_driver.driver, intf); + return -EINVAL; + } + + mutex_init(&streaming->mutex); + streaming->intf = usb_get_intf(intf); + streaming->intfnum = intf->cur_altsetting->desc.bInterfaceNumber; + + /* The Pico iMage webcam has its class-specific interface descriptors + * after the endpoint descriptors. + */ + if (buflen == 0) { + for (i = 0; i < alts->desc.bNumEndpoints; ++i) { + struct usb_host_endpoint *ep = &alts->endpoint[i]; + + if (ep->extralen == 0) + continue; + + if (ep->extralen > 2 && + ep->extra[1] == USB_DT_CS_INTERFACE) { + uvc_trace(UVC_TRACE_DESCR, "trying extra data " + "from endpoint %u.\n", i); + buffer = alts->endpoint[i].extra; + buflen = alts->endpoint[i].extralen; + break; + } + } + } + + /* Skip the standard interface descriptors. */ + while (buflen > 2 && buffer[1] != USB_DT_CS_INTERFACE) { + buflen -= buffer[0]; + buffer += buffer[0]; + } + + if (buflen <= 2) { + uvc_trace(UVC_TRACE_DESCR, "no class-specific streaming " + "interface descriptors found.\n"); + goto error; + } + + /* Parse the header descriptor. */ + if (buffer[2] == VS_OUTPUT_HEADER) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface " + "%d OUTPUT HEADER descriptor is not supported.\n", + dev->udev->devnum, alts->desc.bInterfaceNumber); + goto error; + } else if (buffer[2] == VS_INPUT_HEADER) { + p = buflen >= 5 ? buffer[3] : 0; + n = buflen >= 12 ? buffer[12] : 0; + + if (buflen < 13 + p*n || buffer[2] != VS_INPUT_HEADER) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " + "interface %d INPUT HEADER descriptor is " + "invalid.\n", dev->udev->devnum, + alts->desc.bInterfaceNumber); + goto error; + } + + streaming->header.bNumFormats = p; + streaming->header.bEndpointAddress = buffer[6]; + streaming->header.bmInfo = buffer[7]; + streaming->header.bTerminalLink = buffer[8]; + streaming->header.bStillCaptureMethod = buffer[9]; + streaming->header.bTriggerSupport = buffer[10]; + streaming->header.bTriggerUsage = buffer[11]; + streaming->header.bControlSize = n; + + streaming->header.bmaControls = kmalloc(p*n, GFP_KERNEL); + if (streaming->header.bmaControls == NULL) { + ret = -ENOMEM; + goto error; + } + + memcpy(streaming->header.bmaControls, &buffer[13], p*n); + } else { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface " + "%d HEADER descriptor not found.\n", dev->udev->devnum, + alts->desc.bInterfaceNumber); + goto error; + } + + buflen -= buffer[0]; + buffer += buffer[0]; + + _buffer = buffer; + _buflen = buflen; + + /* Count the format and frame descriptors. */ + while (_buflen > 2) { + switch (_buffer[2]) { + case VS_FORMAT_UNCOMPRESSED: + case VS_FORMAT_MJPEG: + case VS_FORMAT_FRAME_BASED: + nformats++; + break; + + case VS_FORMAT_DV: + /* DV format has no frame descriptor. We will create a + * dummy frame descriptor with a dummy frame interval. + */ + nformats++; + nframes++; + nintervals++; + break; + + case VS_FORMAT_MPEG2TS: + case VS_FORMAT_STREAM_BASED: + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " + "interface %d FORMAT %u is not supported.\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber, _buffer[2]); + break; + + case VS_FRAME_UNCOMPRESSED: + case VS_FRAME_MJPEG: + nframes++; + if (_buflen > 25) + nintervals += _buffer[25] ? _buffer[25] : 3; + break; + + case VS_FRAME_FRAME_BASED: + nframes++; + if (_buflen > 21) + nintervals += _buffer[21] ? _buffer[21] : 3; + break; + } + + _buflen -= _buffer[0]; + _buffer += _buffer[0]; + } + + if (nformats == 0) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface " + "%d has no supported formats defined.\n", + dev->udev->devnum, alts->desc.bInterfaceNumber); + goto error; + } + + size = nformats * sizeof *format + nframes * sizeof *frame + + nintervals * sizeof *interval; + format = kzalloc(size, GFP_KERNEL); + if (format == NULL) { + ret = -ENOMEM; + goto error; + } + + frame = (struct uvc_frame *)&format[nformats]; + interval = (__u32 *)&frame[nframes]; + + streaming->format = format; + streaming->nformats = nformats; + + /* Parse the format descriptors. */ + while (buflen > 2) { + switch (buffer[2]) { + case VS_FORMAT_UNCOMPRESSED: + case VS_FORMAT_MJPEG: + case VS_FORMAT_DV: + case VS_FORMAT_FRAME_BASED: + format->frame = frame; + ret = uvc_parse_format(dev, streaming, format, + &interval, buffer, buflen); + if (ret < 0) + goto error; + + frame += format->nframes; + format++; + + buflen -= ret; + buffer += ret; + continue; + + default: + break; + } + + buflen -= buffer[0]; + buffer += buffer[0]; + } + + /* Parse the alternate settings to find the maximum bandwidth. */ + for (i = 0; i < intf->num_altsetting; ++i) { + struct usb_host_endpoint *ep; + alts = &intf->altsetting[i]; + ep = uvc_find_endpoint(alts, + streaming->header.bEndpointAddress); + if (ep == NULL) + continue; + + psize = le16_to_cpu(ep->desc.wMaxPacketSize); + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + if (psize > streaming->maxpsize) + streaming->maxpsize = psize; + } + + list_add_tail(&streaming->list, &dev->streaming); + return 0; + +error: + usb_driver_release_interface(&uvc_driver.driver, intf); + usb_put_intf(intf); + kfree(streaming->format); + kfree(streaming->header.bmaControls); + kfree(streaming); + return ret; +} + +/* Parse vendor-specific extensions. */ +static int uvc_parse_vendor_control(struct uvc_device *dev, + const unsigned char *buffer, int buflen) +{ + struct usb_device *udev = dev->udev; + struct usb_host_interface *alts = dev->intf->cur_altsetting; + struct uvc_entity *unit; + unsigned int n, p; + int handled = 0; + + switch (le16_to_cpu(dev->udev->descriptor.idVendor)) { + case 0x046d: /* Logitech */ + if (buffer[1] != 0x41 || buffer[2] != 0x01) + break; + + /* Logitech implements several vendor specific functions + * through vendor specific extension units (LXU). + * + * The LXU descriptors are similar to XU descriptors + * (see "USB Device Video Class for Video Devices", section + * 3.7.2.6 "Extension Unit Descriptor") with the following + * differences: + * + * ---------------------------------------------------------- + * 0 bLength 1 Number + * Size of this descriptor, in bytes: 24+p+n*2 + * ---------------------------------------------------------- + * 23+p+n bmControlsType N Bitmap + * Individual bits in the set are defined: + * 0: Absolute + * 1: Relative + * + * This bitset is mapped exactly the same as bmControls. + * ---------------------------------------------------------- + * 23+p+n*2 bReserved 1 Boolean + * ---------------------------------------------------------- + * 24+p+n*2 iExtension 1 Index + * Index of a string descriptor that describes this + * extension unit. + * ---------------------------------------------------------- + */ + p = buflen >= 22 ? buffer[21] : 0; + n = buflen >= 25 + p ? buffer[22+p] : 0; + + if (buflen < 25 + p + 2*n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d EXTENSION_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + break; + } + + unit = kzalloc(sizeof *unit + p + 2*n, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = VC_EXTENSION_UNIT; + memcpy(unit->extension.guidExtensionCode, &buffer[4], 16); + unit->extension.bNumControls = buffer[20]; + unit->extension.bNrInPins = + le16_to_cpup((__le16 *)&buffer[21]); + unit->extension.baSourceID = (__u8 *)unit + sizeof *unit; + memcpy(unit->extension.baSourceID, &buffer[22], p); + unit->extension.bControlSize = buffer[22+p]; + unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p; + unit->extension.bmControlsType = (__u8 *)unit + sizeof *unit + + p + n; + memcpy(unit->extension.bmControls, &buffer[23+p], 2*n); + + if (buffer[24+p+2*n] != 0) + usb_string(udev, buffer[24+p+2*n], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Extension %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + handled = 1; + break; + } + + return handled; +} + +static int uvc_parse_standard_control(struct uvc_device *dev, + const unsigned char *buffer, int buflen) +{ + struct usb_device *udev = dev->udev; + struct uvc_entity *unit, *term; + struct usb_interface *intf; + struct usb_host_interface *alts = dev->intf->cur_altsetting; + unsigned int i, n, p, len; + __u16 type; + + switch (buffer[2]) { + case VC_HEADER: + n = buflen >= 12 ? buffer[11] : 0; + + if (buflen < 12 || buflen < 12 + n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d HEADER error\n", udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + dev->uvc_version = le16_to_cpup((__le16 *)&buffer[3]); + dev->clock_frequency = le32_to_cpup((__le32 *)&buffer[7]); + + /* Parse all USB Video Streaming interfaces. */ + for (i = 0; i < n; ++i) { + intf = usb_ifnum_to_if(udev, buffer[12+i]); + if (intf == NULL) { + uvc_trace(UVC_TRACE_DESCR, "device %d " + "interface %d doesn't exists\n", + udev->devnum, i); + continue; + } + + uvc_parse_streaming(dev, intf); + } + break; + + case VC_INPUT_TERMINAL: + if (buflen < 8) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d INPUT_TERMINAL error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + /* Make sure the terminal type MSB is not null, otherwise it + * could be confused with a unit. + */ + type = le16_to_cpup((__le16 *)&buffer[4]); + if ((type & 0xff00) == 0) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d INPUT_TERMINAL %d has invalid " + "type 0x%04x, skipping\n", udev->devnum, + alts->desc.bInterfaceNumber, + buffer[3], type); + return 0; + } + + n = 0; + p = 0; + len = 8; + + if (type == ITT_CAMERA) { + n = buflen >= 15 ? buffer[14] : 0; + len = 15; + + } else if (type == ITT_MEDIA_TRANSPORT_INPUT) { + n = buflen >= 9 ? buffer[8] : 0; + p = buflen >= 10 + n ? buffer[9+n] : 0; + len = 10; + } + + if (buflen < len + n + p) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d INPUT_TERMINAL error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + term = kzalloc(sizeof *term + n + p, GFP_KERNEL); + if (term == NULL) + return -ENOMEM; + + term->id = buffer[3]; + term->type = type | UVC_TERM_INPUT; + + if (UVC_ENTITY_TYPE(term) == ITT_CAMERA) { + term->camera.bControlSize = n; + term->camera.bmControls = (__u8 *)term + sizeof *term; + term->camera.wObjectiveFocalLengthMin = + le16_to_cpup((__le16 *)&buffer[8]); + term->camera.wObjectiveFocalLengthMax = + le16_to_cpup((__le16 *)&buffer[10]); + term->camera.wOcularFocalLength = + le16_to_cpup((__le16 *)&buffer[12]); + memcpy(term->camera.bmControls, &buffer[15], n); + } else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT) { + term->media.bControlSize = n; + term->media.bmControls = (__u8 *)term + sizeof *term; + term->media.bTransportModeSize = p; + term->media.bmTransportModes = (__u8 *)term + + sizeof *term + n; + memcpy(term->media.bmControls, &buffer[9], n); + memcpy(term->media.bmTransportModes, &buffer[10+n], p); + } + + if (buffer[7] != 0) + usb_string(udev, buffer[7], term->name, + sizeof term->name); + else if (UVC_ENTITY_TYPE(term) == ITT_CAMERA) + sprintf(term->name, "Camera %u", buffer[3]); + else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT) + sprintf(term->name, "Media %u", buffer[3]); + else + sprintf(term->name, "Input %u", buffer[3]); + + list_add_tail(&term->list, &dev->entities); + break; + + case VC_OUTPUT_TERMINAL: + if (buflen < 9) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d OUTPUT_TERMINAL error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + /* Make sure the terminal type MSB is not null, otherwise it + * could be confused with a unit. + */ + type = le16_to_cpup((__le16 *)&buffer[4]); + if ((type & 0xff00) == 0) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d OUTPUT_TERMINAL %d has invalid " + "type 0x%04x, skipping\n", udev->devnum, + alts->desc.bInterfaceNumber, buffer[3], type); + return 0; + } + + term = kzalloc(sizeof *term, GFP_KERNEL); + if (term == NULL) + return -ENOMEM; + + term->id = buffer[3]; + term->type = type | UVC_TERM_OUTPUT; + term->output.bSourceID = buffer[7]; + + if (buffer[8] != 0) + usb_string(udev, buffer[8], term->name, + sizeof term->name); + else + sprintf(term->name, "Output %u", buffer[3]); + + list_add_tail(&term->list, &dev->entities); + break; + + case VC_SELECTOR_UNIT: + p = buflen >= 5 ? buffer[4] : 0; + + if (buflen < 5 || buflen < 6 + p) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d SELECTOR_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + unit = kzalloc(sizeof *unit + p, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = buffer[2]; + unit->selector.bNrInPins = buffer[4]; + unit->selector.baSourceID = (__u8 *)unit + sizeof *unit; + memcpy(unit->selector.baSourceID, &buffer[5], p); + + if (buffer[5+p] != 0) + usb_string(udev, buffer[5+p], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Selector %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + break; + + case VC_PROCESSING_UNIT: + n = buflen >= 8 ? buffer[7] : 0; + p = dev->uvc_version >= 0x0110 ? 10 : 9; + + if (buflen < p + n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d PROCESSING_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + unit = kzalloc(sizeof *unit + n, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = buffer[2]; + unit->processing.bSourceID = buffer[4]; + unit->processing.wMaxMultiplier = + le16_to_cpup((__le16 *)&buffer[5]); + unit->processing.bControlSize = buffer[7]; + unit->processing.bmControls = (__u8 *)unit + sizeof *unit; + memcpy(unit->processing.bmControls, &buffer[8], n); + if (dev->uvc_version >= 0x0110) + unit->processing.bmVideoStandards = buffer[9+n]; + + if (buffer[8+n] != 0) + usb_string(udev, buffer[8+n], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Processing %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + break; + + case VC_EXTENSION_UNIT: + p = buflen >= 22 ? buffer[21] : 0; + n = buflen >= 24 + p ? buffer[22+p] : 0; + + if (buflen < 24 + p + n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d EXTENSION_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + unit = kzalloc(sizeof *unit + p + n, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = buffer[2]; + memcpy(unit->extension.guidExtensionCode, &buffer[4], 16); + unit->extension.bNumControls = buffer[20]; + unit->extension.bNrInPins = + le16_to_cpup((__le16 *)&buffer[21]); + unit->extension.baSourceID = (__u8 *)unit + sizeof *unit; + memcpy(unit->extension.baSourceID, &buffer[22], p); + unit->extension.bControlSize = buffer[22+p]; + unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p; + memcpy(unit->extension.bmControls, &buffer[23+p], n); + + if (buffer[23+p+n] != 0) + usb_string(udev, buffer[23+p+n], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Extension %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + break; + + default: + uvc_trace(UVC_TRACE_DESCR, "Found an unknown CS_INTERFACE " + "descriptor (%u)\n", buffer[2]); + break; + } + + return 0; +} + +static int uvc_parse_control(struct uvc_device *dev) +{ + struct usb_host_interface *alts = dev->intf->cur_altsetting; + unsigned char *buffer = alts->extra; + int buflen = alts->extralen; + int ret; + + /* Parse the default alternate setting only, as the UVC specification + * defines a single alternate setting, the default alternate setting + * zero. + */ + + while (buflen > 2) { + if (uvc_parse_vendor_control(dev, buffer, buflen) || + buffer[1] != USB_DT_CS_INTERFACE) + goto next_descriptor; + + if ((ret = uvc_parse_standard_control(dev, buffer, buflen)) < 0) + return ret; + +next_descriptor: + buflen -= buffer[0]; + buffer += buffer[0]; + } + + /* Check if the optional status endpoint is present. */ + if (alts->desc.bNumEndpoints == 1) { + struct usb_host_endpoint *ep = &alts->endpoint[0]; + struct usb_endpoint_descriptor *desc = &ep->desc; + + if (usb_endpoint_is_int_in(desc) && + le16_to_cpu(desc->wMaxPacketSize) >= 8 && + desc->bInterval != 0) { + uvc_trace(UVC_TRACE_DESCR, "Found a Status endpoint " + "(addr %02x).\n", desc->bEndpointAddress); + dev->int_ep = ep; + } + } + + return 0; +} + +/* ------------------------------------------------------------------------ + * USB probe and disconnect + */ + +/* + * Unregister the video devices. + */ +static void uvc_unregister_video(struct uvc_device *dev) +{ + if (dev->video.vdev) { + if (dev->video.vdev->minor == -1) + video_device_release(dev->video.vdev); + else + video_unregister_device(dev->video.vdev); + dev->video.vdev = NULL; + } +} + +/* + * Scan the UVC descriptors to locate a chain starting at an Output Terminal + * and containing the following units: + * + * - a USB Streaming Output Terminal + * - zero or one Processing Unit + * - zero, one or mode single-input Selector Units + * - zero or one multiple-input Selector Units, provided all inputs are + * connected to input terminals + * - zero, one or mode single-input Extension Units + * - one Camera Input Terminal, or one or more External terminals. + * + * A side forward scan is made on each detected entity to check for additional + * extension units. + */ +static int uvc_scan_chain_entity(struct uvc_video_device *video, + struct uvc_entity *entity) +{ + switch (UVC_ENTITY_TYPE(entity)) { + case VC_EXTENSION_UNIT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- XU %d", entity->id); + + if (entity->extension.bNrInPins != 1) { + uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has more " + "than 1 input pin.\n", entity->id); + return -1; + } + + list_add_tail(&entity->chain, &video->extensions); + break; + + case VC_PROCESSING_UNIT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- PU %d", entity->id); + + if (video->processing != NULL) { + uvc_trace(UVC_TRACE_DESCR, "Found multiple " + "Processing Units in chain.\n"); + return -1; + } + + video->processing = entity; + break; + + case VC_SELECTOR_UNIT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- SU %d", entity->id); + + /* Single-input selector units are ignored. */ + if (entity->selector.bNrInPins == 1) + break; + + if (video->selector != NULL) { + uvc_trace(UVC_TRACE_DESCR, "Found multiple Selector " + "Units in chain.\n"); + return -1; + } + + video->selector = entity; + break; + + case ITT_VENDOR_SPECIFIC: + case ITT_CAMERA: + case ITT_MEDIA_TRANSPORT_INPUT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- IT %d\n", entity->id); + + list_add_tail(&entity->chain, &video->iterms); + break; + + default: + uvc_trace(UVC_TRACE_DESCR, "Unsupported entity type " + "0x%04x found in chain.\n", UVC_ENTITY_TYPE(entity)); + return -1; + } + + return 0; +} + +static int uvc_scan_chain_forward(struct uvc_video_device *video, + struct uvc_entity *entity, struct uvc_entity *prev) +{ + struct uvc_entity *forward; + int found; + + /* Forward scan */ + forward = NULL; + found = 0; + + while (1) { + forward = uvc_entity_by_reference(video->dev, entity->id, + forward); + if (forward == NULL) + break; + + if (UVC_ENTITY_TYPE(forward) != VC_EXTENSION_UNIT || + forward == prev) + continue; + + if (forward->extension.bNrInPins != 1) { + uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has" + "more than 1 input pin.\n", entity->id); + return -1; + } + + list_add_tail(&forward->chain, &video->extensions); + if (uvc_trace_param & UVC_TRACE_PROBE) { + if (!found) + printk(" (-> XU"); + + printk(" %d", forward->id); + found = 1; + } + } + if (found) + printk(")"); + + return 0; +} + +static int uvc_scan_chain_backward(struct uvc_video_device *video, + struct uvc_entity *entity) +{ + struct uvc_entity *term; + int id = -1, i; + + switch (UVC_ENTITY_TYPE(entity)) { + case VC_EXTENSION_UNIT: + id = entity->extension.baSourceID[0]; + break; + + case VC_PROCESSING_UNIT: + id = entity->processing.bSourceID; + break; + + case VC_SELECTOR_UNIT: + /* Single-input selector units are ignored. */ + if (entity->selector.bNrInPins == 1) { + id = entity->selector.baSourceID[0]; + break; + } + + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- IT"); + + video->selector = entity; + for (i = 0; i < entity->selector.bNrInPins; ++i) { + id = entity->selector.baSourceID[i]; + term = uvc_entity_by_id(video->dev, id); + if (term == NULL || !UVC_ENTITY_IS_ITERM(term)) { + uvc_trace(UVC_TRACE_DESCR, "Selector unit %d " + "input %d isn't connected to an " + "input terminal\n", entity->id, i); + return -1; + } + + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" %d", term->id); + + list_add_tail(&term->chain, &video->iterms); + uvc_scan_chain_forward(video, term, entity); + } + + if (uvc_trace_param & UVC_TRACE_PROBE) + printk("\n"); + + id = 0; + break; + } + + return id; +} + +static int uvc_scan_chain(struct uvc_video_device *video) +{ + struct uvc_entity *entity, *prev; + int id; + + entity = video->oterm; + uvc_trace(UVC_TRACE_PROBE, "Scanning UVC chain: OT %d", entity->id); + id = entity->output.bSourceID; + while (id != 0) { + prev = entity; + entity = uvc_entity_by_id(video->dev, id); + if (entity == NULL) { + uvc_trace(UVC_TRACE_DESCR, "Found reference to " + "unknown entity %d.\n", id); + return -1; + } + + /* Process entity */ + if (uvc_scan_chain_entity(video, entity) < 0) + return -1; + + /* Forward scan */ + if (uvc_scan_chain_forward(video, entity, prev) < 0) + return -1; + + /* Stop when a terminal is found. */ + if (!UVC_ENTITY_IS_UNIT(entity)) + break; + + /* Backward scan */ + id = uvc_scan_chain_backward(video, entity); + if (id < 0) + return id; + } + + /* Initialize the video buffers queue. */ + uvc_queue_init(&video->queue); + + return 0; +} + +/* + * Register the video devices. + * + * The driver currently supports a single video device per control interface + * only. The terminal and units must match the following structure: + * + * ITT_CAMERA -> VC_PROCESSING_UNIT -> VC_EXTENSION_UNIT{0,n} -> TT_STREAMING + * + * The Extension Units, if present, must have a single input pin. The + * Processing Unit and Extension Units can be in any order. Additional + * Extension Units connected to the main chain as single-unit branches are + * also supported. + */ +static int uvc_register_video(struct uvc_device *dev) +{ + struct video_device *vdev; + struct uvc_entity *term; + int found = 0, ret; + + /* Check if the control interface matches the structure we expect. */ + list_for_each_entry(term, &dev->entities, list) { + struct uvc_streaming *streaming; + + if (UVC_ENTITY_TYPE(term) != TT_STREAMING) + continue; + + memset(&dev->video, 0, sizeof dev->video); + mutex_init(&dev->video.ctrl_mutex); + INIT_LIST_HEAD(&dev->video.iterms); + INIT_LIST_HEAD(&dev->video.extensions); + dev->video.oterm = term; + dev->video.dev = dev; + if (uvc_scan_chain(&dev->video) < 0) + continue; + + list_for_each_entry(streaming, &dev->streaming, list) { + if (streaming->header.bTerminalLink == term->id) { + dev->video.streaming = streaming; + found = 1; + break; + } + } + + if (found) + break; + } + + if (!found) { + uvc_printk(KERN_INFO, "No valid video chain found.\n"); + return -1; + } + + if (uvc_trace_param & UVC_TRACE_PROBE) { + uvc_printk(KERN_INFO, "Found a valid video chain ("); + list_for_each_entry(term, &dev->video.iterms, chain) { + printk("%d", term->id); + if (term->chain.next != &dev->video.iterms) + printk(","); + } + printk(" -> %d).\n", dev->video.oterm->id); + } + + /* Initialize the streaming interface with default streaming + * parameters. + */ + if ((ret = uvc_video_init(&dev->video)) < 0) { + uvc_printk(KERN_ERR, "Failed to initialize the device " + "(%d).\n", ret); + return ret; + } + + /* Register the device with V4L. */ + vdev = video_device_alloc(); + if (vdev == NULL) + return -1; + + /* We already hold a reference to dev->udev. The video device will be + * unregistered before the reference is released, so we don't need to + * get another one. + */ + vdev->dev = &dev->intf->dev; + vdev->type = 0; + vdev->type2 = 0; + vdev->minor = -1; + vdev->fops = &uvc_fops; + vdev->release = video_device_release; + strncpy(vdev->name, dev->name, sizeof vdev->name); + + /* Set the driver data before calling video_register_device, otherwise + * uvc_v4l2_open might race us. + * + * FIXME: usb_set_intfdata hasn't been called so far. Is that a + * problem ? Does any function which could be called here get + * a pointer to the usb_interface ? + */ + dev->video.vdev = vdev; + video_set_drvdata(vdev, &dev->video); + + if (video_register_device(vdev, VFL_TYPE_GRABBER, -1) < 0) { + dev->video.vdev = NULL; + video_device_release(vdev); + return -1; + } + + return 0; +} + +/* + * Delete the UVC device. + * + * Called by the kernel when the last reference to the uvc_device structure + * is released. + * + * Unregistering the video devices is done here because every opened instance + * must be closed before the device can be unregistered. An alternative would + * have been to use another reference count for uvc_v4l2_open/uvc_release, and + * unregister the video devices on disconnect when that reference count drops + * to zero. + * + * As this function is called after or during disconnect(), all URBs have + * already been canceled by the USB core. There is no need to kill the + * interrupt URB manually. + */ +void uvc_delete(struct kref *kref) +{ + struct uvc_device *dev = container_of(kref, struct uvc_device, kref); + struct list_head *p, *n; + + /* Unregister the video device */ + uvc_unregister_video(dev); + usb_put_intf(dev->intf); + usb_put_dev(dev->udev); + + uvc_status_cleanup(dev); + uvc_ctrl_cleanup_device(dev); + + list_for_each_safe(p, n, &dev->entities) { + struct uvc_entity *entity; + entity = list_entry(p, struct uvc_entity, list); + kfree(entity); + } + + list_for_each_safe(p, n, &dev->streaming) { + struct uvc_streaming *streaming; + streaming = list_entry(p, struct uvc_streaming, list); + usb_driver_release_interface(&uvc_driver.driver, + streaming->intf); + usb_put_intf(streaming->intf); + kfree(streaming->format); + kfree(streaming->header.bmaControls); + kfree(streaming); + } + + kfree(dev); +} + +static int uvc_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct uvc_device *dev; + int ret; + + if (id->idVendor && id->idProduct) + uvc_trace(UVC_TRACE_PROBE, "Probing known UVC device %s " + "(%04x:%04x)\n", udev->devpath, id->idVendor, + id->idProduct); + else + uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n", + udev->devpath); + + /* Allocate memory for the device and initialize it */ + if ((dev = kzalloc(sizeof *dev, GFP_KERNEL)) == NULL) + return -ENOMEM; + + INIT_LIST_HEAD(&dev->entities); + INIT_LIST_HEAD(&dev->streaming); + kref_init(&dev->kref); + + dev->udev = usb_get_dev(udev); + dev->intf = usb_get_intf(intf); + dev->intfnum = intf->cur_altsetting->desc.bInterfaceNumber; + dev->quirks = id->driver_info | uvc_quirks_param; + + if (udev->product != NULL) + strncpy(dev->name, udev->product, sizeof dev->name); + else + snprintf(dev->name, sizeof dev->name, + "UVC Camera (%04x:%04x)", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + /* Parse the Video Class control descriptor */ + if (uvc_parse_control(dev) < 0) { + uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC " + "descriptors.\n"); + goto error; + } + + uvc_printk(KERN_INFO, "Found UVC %u.%02u device %s (%04x:%04x)\n", + dev->uvc_version >> 8, dev->uvc_version & 0xff, + udev->product ? udev->product : "", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + if (uvc_quirks_param != 0) { + uvc_printk(KERN_INFO, "Forcing device quirks 0x%x by module " + "parameter for testing purpose.\n", uvc_quirks_param); + uvc_printk(KERN_INFO, "Please report required quirks to the " + "linux-uvc-devel mailing list.\n"); + } + + /* Initialize controls */ + if (uvc_ctrl_init_device(dev) < 0) + goto error; + + /* Register the video devices */ + if (uvc_register_video(dev) < 0) + goto error; + + /* Save our data pointer in the interface data */ + usb_set_intfdata(intf, dev); + + /* Initialize the interrupt URB */ + if ((ret = uvc_status_init(dev)) < 0) { + uvc_printk(KERN_INFO, "Unable to initialize the status " + "endpoint (%d), status interrupt will not be " + "supported.\n", ret); + } + + uvc_trace(UVC_TRACE_PROBE, "UVC device initialized.\n"); + return 0; + +error: + kref_put(&dev->kref, uvc_delete); + return -ENODEV; +} + +static void uvc_disconnect(struct usb_interface *intf) +{ + struct uvc_device *dev = usb_get_intfdata(intf); + + /* Set the USB interface data to NULL. This can be done outside the + * lock, as there's no other reader. + */ + usb_set_intfdata(intf, NULL); + + if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOSTREAMING) + return; + + /* uvc_v4l2_open() might race uvc_disconnect(). A static driver-wide + * lock is needed to prevent uvc_disconnect from releasing its + * reference to the uvc_device instance after uvc_v4l2_open() received + * the pointer to the device (video_devdata) but before it got the + * chance to increase the reference count (kref_get). + */ + mutex_lock(&uvc_driver.open_mutex); + + dev->state |= UVC_DEV_DISCONNECTED; + kref_put(&dev->kref, uvc_delete); + + mutex_unlock(&uvc_driver.open_mutex); +} + +static int uvc_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct uvc_device *dev = usb_get_intfdata(intf); + + uvc_trace(UVC_TRACE_SUSPEND, "Suspending interface %u\n", + intf->cur_altsetting->desc.bInterfaceNumber); + + /* Controls are cached on the fly so they don't need to be saved. */ + if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) + return uvc_status_suspend(dev); + + if (dev->video.streaming->intf != intf) { + uvc_trace(UVC_TRACE_SUSPEND, "Suspend: video streaming USB " + "interface mismatch.\n"); + return -EINVAL; + } + + return uvc_video_suspend(&dev->video); +} + +static int uvc_resume(struct usb_interface *intf) +{ + struct uvc_device *dev = usb_get_intfdata(intf); + int ret; + + uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n", + intf->cur_altsetting->desc.bInterfaceNumber); + + if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) { + if ((ret = uvc_ctrl_resume_device(dev)) < 0) + return ret; + + return uvc_status_resume(dev); + } + + if (dev->video.streaming->intf != intf) { + uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB " + "interface mismatch.\n"); + return -EINVAL; + } + + return uvc_video_resume(&dev->video); +} + +/* ------------------------------------------------------------------------ + * Driver initialization and cleanup + */ + +/* + * The Logitech cameras listed below have their interface class set to + * VENDOR_SPEC because they don't announce themselves as UVC devices, even + * though they are compliant. + */ +static struct usb_device_id uvc_ids[] = { + /* ALi M5606 (Clevo M540SR) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x0402, + .idProduct = 0x5606, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Creative Live! Optia */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x041e, + .idProduct = 0x4057, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Microsoft Lifecam NX-6000 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x045e, + .idProduct = 0x00f8, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Microsoft Lifecam VX-7000 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x045e, + .idProduct = 0x0723, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Logitech Quickcam Fusion */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c1, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam Orbit MP */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c2, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam Pro for Notebook */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c3, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam Pro 5000 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c5, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam OEM Dell Notebook */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c6, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam OEM Cisco VT Camera II */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c7, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Apple Built-In iSight */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x05ac, + .idProduct = 0x8501, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX + | UVC_QUIRK_BUILTIN_ISIGHT }, + /* Genesys Logic USB 2.0 PC Camera */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x05e3, + .idProduct = 0x0505, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Silicon Motion SM371 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x090c, + .idProduct = 0xb371, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* MT6227 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x0e8d, + .idProduct = 0x0004, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Syntek (HP Spartan) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x174f, + .idProduct = 0x5212, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Syntek (Asus U3S) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x174f, + .idProduct = 0x8a33, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Ecamm Pico iMage */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x18cd, + .idProduct = 0xcafe, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_EXTRAFIELDS }, + /* Bodelin ProScopeHR */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_DEV_HI + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x19ab, + .idProduct = 0x1000, + .bcdDevice_hi = 0x0126, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STATUS_INTERVAL }, + /* SiGma Micro USB Web Camera */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x1c4f, + .idProduct = 0x3000, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX + | UVC_QUIRK_IGNORE_SELECTOR_UNIT}, + /* Acer OEM Webcam - Unknown vendor */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0100, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Packard Bell OEM Webcam */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0101, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Acer Crystal Eye webcam */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0102, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Acer OrbiCam - Unknown vendor */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0200, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Generic USB Video Class */ + { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) }, + {} +}; + +MODULE_DEVICE_TABLE(usb, uvc_ids); + +struct uvc_driver uvc_driver = { + .driver = { + .name = "uvcvideo", + .probe = uvc_probe, + .disconnect = uvc_disconnect, + .suspend = uvc_suspend, + .resume = uvc_resume, + .id_table = uvc_ids, + .supports_autosuspend = 1, + }, +}; + +static int __init uvc_init(void) +{ + int result; + + INIT_LIST_HEAD(&uvc_driver.devices); + INIT_LIST_HEAD(&uvc_driver.controls); + mutex_init(&uvc_driver.open_mutex); + mutex_init(&uvc_driver.ctrl_mutex); + + uvc_ctrl_init(); + + result = usb_register(&uvc_driver.driver); + if (result == 0) + printk(KERN_INFO DRIVER_DESC " (" DRIVER_VERSION ")\n"); + return result; +} + +static void __exit uvc_cleanup(void) +{ + usb_deregister(&uvc_driver.driver); +} + +module_init(uvc_init); +module_exit(uvc_cleanup); + +module_param_named(quirks, uvc_quirks_param, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(quirks, "Forced device quirks"); +module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(trace, "Trace level bitmask"); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); diff --git a/drivers/media/video/uvc/uvc_isight.c b/drivers/media/video/uvc/uvc_isight.c new file mode 100644 index 000000000000..37bdefdbead5 --- /dev/null +++ b/drivers/media/video/uvc/uvc_isight.c @@ -0,0 +1,134 @@ +/* + * uvc_isight.c -- USB Video Class driver - iSight support + * + * Copyright (C) 2006-2007 + * Ivan N. Zlatev + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include + +#include "uvcvideo.h" + +/* Built-in iSight webcams implements most of UVC 1.0 except a + * different packet format. Instead of sending a header at the + * beginning of each isochronous transfer payload, the webcam sends a + * single header per image (on its own in a packet), followed by + * packets containing data only. + * + * Offset Size (bytes) Description + * ------------------------------------------------------------------ + * 0x00 1 Header length + * 0x01 1 Flags (UVC-compliant) + * 0x02 4 Always equal to '11223344' + * 0x06 8 Always equal to 'deadbeefdeadface' + * 0x0e 16 Unknown + * + * The header can be prefixed by an optional, unknown-purpose byte. + */ + +static int isight_decode(struct uvc_video_queue *queue, struct uvc_buffer *buf, + const __u8 *data, unsigned int len) +{ + static const __u8 hdr[] = { + 0x11, 0x22, 0x33, 0x44, + 0xde, 0xad, 0xbe, 0xef, + 0xde, 0xad, 0xfa, 0xce + }; + + unsigned int maxlen, nbytes; + __u8 *mem; + int is_header = 0; + + if (buf == NULL) + return 0; + + if ((len >= 14 && memcmp(&data[2], hdr, 12) == 0) || + (len >= 15 && memcmp(&data[3], hdr, 12) == 0)) { + uvc_trace(UVC_TRACE_FRAME, "iSight header found\n"); + is_header = 1; + } + + /* Synchronize to the input stream by waiting for a header packet. */ + if (buf->state != UVC_BUF_STATE_ACTIVE) { + if (!is_header) { + uvc_trace(UVC_TRACE_FRAME, "Dropping packet (out of " + "sync).\n"); + return 0; + } + + buf->state = UVC_BUF_STATE_ACTIVE; + } + + /* Mark the buffer as done if we're at the beginning of a new frame. + * + * Empty buffers (bytesused == 0) don't trigger end of frame detection + * as it doesn't make sense to return an empty buffer. + */ + if (is_header && buf->buf.bytesused != 0) { + buf->state = UVC_BUF_STATE_DONE; + return -EAGAIN; + } + + /* Copy the video data to the buffer. Skip header packets, as they + * contain no data. + */ + if (!is_header) { + maxlen = buf->buf.length - buf->buf.bytesused; + mem = queue->mem + buf->buf.m.offset + buf->buf.bytesused; + nbytes = min(len, maxlen); + memcpy(mem, data, nbytes); + buf->buf.bytesused += nbytes; + + if (len > maxlen || buf->buf.bytesused == buf->buf.length) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete " + "(overflow).\n"); + buf->state = UVC_BUF_STATE_DONE; + } + } + + return 0; +} + +void uvc_video_decode_isight(struct urb *urb, struct uvc_video_device *video, + struct uvc_buffer *buf) +{ + int ret, i; + + for (i = 0; i < urb->number_of_packets; ++i) { + if (urb->iso_frame_desc[i].status < 0) { + uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame " + "lost (%d).\n", + urb->iso_frame_desc[i].status); + } + + /* Decode the payload packet. + * uvc_video_decode is entered twice when a frame transition + * has been detected because the end of frame can only be + * reliably detected when the first packet of the new frame + * is processed. The first pass detects the transition and + * closes the previous frame's buffer, the second pass + * processes the data of the first payload of the new frame. + */ + do { + ret = isight_decode(&video->queue, buf, + urb->transfer_buffer + + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].actual_length); + + if (buf == NULL) + break; + + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + buf = uvc_queue_next_buffer(&video->queue, buf); + } while (ret == -EAGAIN); + } +} diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c new file mode 100644 index 000000000000..0923f0e3b3d4 --- /dev/null +++ b/drivers/media/video/uvc/uvc_queue.c @@ -0,0 +1,477 @@ +/* + * uvc_queue.c -- USB Video Class driver - Buffers management + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "uvcvideo.h" + +/* ------------------------------------------------------------------------ + * Video buffers queue management. + * + * Video queues is initialized by uvc_queue_init(). The function performs + * basic initialization of the uvc_video_queue struct and never fails. + * + * Video buffer allocation and freeing are performed by uvc_alloc_buffers and + * uvc_free_buffers respectively. The former acquires the video queue lock, + * while the later must be called with the lock held (so that allocation can + * free previously allocated buffers). Trying to free buffers that are mapped + * to user space will return -EBUSY. + * + * Video buffers are managed using two queues. However, unlike most USB video + * drivers which use an in queue and an out queue, we use a main queue which + * holds all queued buffers (both 'empty' and 'done' buffers), and an irq + * queue which holds empty buffers. This design (copied from video-buf) + * minimizes locking in interrupt, as only one queue is shared between + * interrupt and user contexts. + * + * Use cases + * --------- + * + * Unless stated otherwise, all operations which modify the irq buffers queue + * are protected by the irq spinlock. + * + * 1. The user queues the buffers, starts streaming and dequeues a buffer. + * + * The buffers are added to the main and irq queues. Both operations are + * protected by the queue lock, and the latert is protected by the irq + * spinlock as well. + * + * The completion handler fetches a buffer from the irq queue and fills it + * with video data. If no buffer is available (irq queue empty), the handler + * returns immediately. + * + * When the buffer is full, the completion handler removes it from the irq + * queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue. + * At that point, any process waiting on the buffer will be woken up. If a + * process tries to dequeue a buffer after it has been marked ready, the + * dequeing will succeed immediately. + * + * 2. Buffers are queued, user is waiting on a buffer and the device gets + * disconnected. + * + * When the device is disconnected, the kernel calls the completion handler + * with an appropriate status code. The handler marks all buffers in the + * irq queue as being erroneous (UVC_BUF_STATE_ERROR) and wakes them up so + * that any process waiting on a buffer gets woken up. + * + * Waking up up the first buffer on the irq list is not enough, as the + * process waiting on the buffer might restart the dequeue operation + * immediately. + * + */ + +void uvc_queue_init(struct uvc_video_queue *queue) +{ + mutex_init(&queue->mutex); + spin_lock_init(&queue->irqlock); + INIT_LIST_HEAD(&queue->mainqueue); + INIT_LIST_HEAD(&queue->irqqueue); +} + +/* + * Allocate the video buffers. + * + * Pages are reserved to make sure they will not be swaped, as they will be + * filled in URB completion handler. + * + * Buffers will be individually mapped, so they must all be page aligned. + */ +int uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers, + unsigned int buflength) +{ + unsigned int bufsize = PAGE_ALIGN(buflength); + unsigned int i; + void *mem = NULL; + int ret; + + if (nbuffers > UVC_MAX_VIDEO_BUFFERS) + nbuffers = UVC_MAX_VIDEO_BUFFERS; + + mutex_lock(&queue->mutex); + + if ((ret = uvc_free_buffers(queue)) < 0) + goto done; + + /* Bail out if no buffers should be allocated. */ + if (nbuffers == 0) + goto done; + + /* Decrement the number of buffers until allocation succeeds. */ + for (; nbuffers > 0; --nbuffers) { + mem = vmalloc_32(nbuffers * bufsize); + if (mem != NULL) + break; + } + + if (mem == NULL) { + ret = -ENOMEM; + goto done; + } + + for (i = 0; i < nbuffers; ++i) { + memset(&queue->buffer[i], 0, sizeof queue->buffer[i]); + queue->buffer[i].buf.index = i; + queue->buffer[i].buf.m.offset = i * bufsize; + queue->buffer[i].buf.length = buflength; + queue->buffer[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + queue->buffer[i].buf.sequence = 0; + queue->buffer[i].buf.field = V4L2_FIELD_NONE; + queue->buffer[i].buf.memory = V4L2_MEMORY_MMAP; + queue->buffer[i].buf.flags = 0; + init_waitqueue_head(&queue->buffer[i].wait); + } + + queue->mem = mem; + queue->count = nbuffers; + queue->buf_size = bufsize; + ret = nbuffers; + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Free the video buffers. + * + * This function must be called with the queue lock held. + */ +int uvc_free_buffers(struct uvc_video_queue *queue) +{ + unsigned int i; + + for (i = 0; i < queue->count; ++i) { + if (queue->buffer[i].vma_use_count != 0) + return -EBUSY; + } + + if (queue->count) { + vfree(queue->mem); + queue->count = 0; + } + + return 0; +} + +static void __uvc_query_buffer(struct uvc_buffer *buf, + struct v4l2_buffer *v4l2_buf) +{ + memcpy(v4l2_buf, &buf->buf, sizeof *v4l2_buf); + + if (buf->vma_use_count) + v4l2_buf->flags |= V4L2_BUF_FLAG_MAPPED; + + switch (buf->state) { + case UVC_BUF_STATE_ERROR: + case UVC_BUF_STATE_DONE: + v4l2_buf->flags |= V4L2_BUF_FLAG_DONE; + break; + case UVC_BUF_STATE_QUEUED: + case UVC_BUF_STATE_ACTIVE: + v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED; + break; + case UVC_BUF_STATE_IDLE: + default: + break; + } +} + +int uvc_query_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf) +{ + int ret = 0; + + mutex_lock(&queue->mutex); + if (v4l2_buf->index >= queue->count) { + ret = -EINVAL; + goto done; + } + + __uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf); + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Queue a video buffer. Attempting to queue a buffer that has already been + * queued will return -EINVAL. + */ +int uvc_queue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf) +{ + struct uvc_buffer *buf; + unsigned long flags; + int ret = 0; + + uvc_trace(UVC_TRACE_CAPTURE, "Queuing buffer %u.\n", v4l2_buf->index); + + if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + v4l2_buf->memory != V4L2_MEMORY_MMAP) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) " + "and/or memory (%u).\n", v4l2_buf->type, + v4l2_buf->memory); + return -EINVAL; + } + + mutex_lock(&queue->mutex); + if (v4l2_buf->index >= queue->count) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n"); + ret = -EINVAL; + goto done; + } + + buf = &queue->buffer[v4l2_buf->index]; + if (buf->state != UVC_BUF_STATE_IDLE) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state " + "(%u).\n", buf->state); + ret = -EINVAL; + goto done; + } + + spin_lock_irqsave(&queue->irqlock, flags); + if (queue->flags & UVC_QUEUE_DISCONNECTED) { + spin_unlock_irqrestore(&queue->irqlock, flags); + ret = -ENODEV; + goto done; + } + buf->state = UVC_BUF_STATE_QUEUED; + buf->buf.bytesused = 0; + list_add_tail(&buf->stream, &queue->mainqueue); + list_add_tail(&buf->queue, &queue->irqqueue); + spin_unlock_irqrestore(&queue->irqlock, flags); + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking) +{ + if (nonblocking) { + return (buf->state != UVC_BUF_STATE_QUEUED && + buf->state != UVC_BUF_STATE_ACTIVE) + ? 0 : -EAGAIN; + } + + return wait_event_interruptible(buf->wait, + buf->state != UVC_BUF_STATE_QUEUED && + buf->state != UVC_BUF_STATE_ACTIVE); +} + +/* + * Dequeue a video buffer. If nonblocking is false, block until a buffer is + * available. + */ +int uvc_dequeue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf, int nonblocking) +{ + struct uvc_buffer *buf; + int ret = 0; + + if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + v4l2_buf->memory != V4L2_MEMORY_MMAP) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) " + "and/or memory (%u).\n", v4l2_buf->type, + v4l2_buf->memory); + return -EINVAL; + } + + mutex_lock(&queue->mutex); + if (list_empty(&queue->mainqueue)) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Empty buffer queue.\n"); + ret = -EINVAL; + goto done; + } + + buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream); + if ((ret = uvc_queue_waiton(buf, nonblocking)) < 0) + goto done; + + uvc_trace(UVC_TRACE_CAPTURE, "Dequeuing buffer %u (%u, %u bytes).\n", + buf->buf.index, buf->state, buf->buf.bytesused); + + switch (buf->state) { + case UVC_BUF_STATE_ERROR: + uvc_trace(UVC_TRACE_CAPTURE, "[W] Corrupted data " + "(transmission error).\n"); + ret = -EIO; + case UVC_BUF_STATE_DONE: + buf->state = UVC_BUF_STATE_IDLE; + break; + + case UVC_BUF_STATE_IDLE: + case UVC_BUF_STATE_QUEUED: + case UVC_BUF_STATE_ACTIVE: + default: + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u " + "(driver bug?).\n", buf->state); + ret = -EINVAL; + goto done; + } + + list_del(&buf->stream); + __uvc_query_buffer(buf, v4l2_buf); + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Poll the video queue. + * + * This function implements video queue polling and is intended to be used by + * the device poll handler. + */ +unsigned int uvc_queue_poll(struct uvc_video_queue *queue, struct file *file, + poll_table *wait) +{ + struct uvc_buffer *buf; + unsigned int mask = 0; + + mutex_lock(&queue->mutex); + if (list_empty(&queue->mainqueue)) { + mask |= POLLERR; + goto done; + } + buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream); + + poll_wait(file, &buf->wait, wait); + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + mask |= POLLIN | POLLRDNORM; + +done: + mutex_unlock(&queue->mutex); + return mask; +} + +/* + * Enable or disable the video buffers queue. + * + * The queue must be enabled before starting video acquisition and must be + * disabled after stopping it. This ensures that the video buffers queue + * state can be properly initialized before buffers are accessed from the + * interrupt handler. + * + * Enabling the video queue initializes parameters (such as sequence number, + * sync pattern, ...). If the queue is already enabled, return -EBUSY. + * + * Disabling the video queue cancels the queue and removes all buffers from + * the main queue. + * + * This function can't be called from interrupt context. Use + * uvc_queue_cancel() instead. + */ +int uvc_queue_enable(struct uvc_video_queue *queue, int enable) +{ + unsigned int i; + int ret = 0; + + mutex_lock(&queue->mutex); + if (enable) { + if (uvc_queue_streaming(queue)) { + ret = -EBUSY; + goto done; + } + queue->sequence = 0; + queue->flags |= UVC_QUEUE_STREAMING; + } else { + uvc_queue_cancel(queue, 0); + INIT_LIST_HEAD(&queue->mainqueue); + + for (i = 0; i < queue->count; ++i) + queue->buffer[i].state = UVC_BUF_STATE_IDLE; + + queue->flags &= ~UVC_QUEUE_STREAMING; + } + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Cancel the video buffers queue. + * + * Cancelling the queue marks all buffers on the irq queue as erroneous, + * wakes them up and remove them from the queue. + * + * If the disconnect parameter is set, further calls to uvc_queue_buffer will + * fail with -ENODEV. + * + * This function acquires the irq spinlock and can be called from interrupt + * context. + */ +void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect) +{ + struct uvc_buffer *buf; + unsigned long flags; + + spin_lock_irqsave(&queue->irqlock, flags); + while (!list_empty(&queue->irqqueue)) { + buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, + queue); + list_del(&buf->queue); + buf->state = UVC_BUF_STATE_ERROR; + wake_up(&buf->wait); + } + /* This must be protected by the irqlock spinlock to avoid race + * conditions between uvc_queue_buffer and the disconnection event that + * could result in an interruptible wait in uvc_dequeue_buffer. Do not + * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED + * state outside the queue code. + */ + if (disconnect) + queue->flags |= UVC_QUEUE_DISCONNECTED; + spin_unlock_irqrestore(&queue->irqlock, flags); +} + +struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, + struct uvc_buffer *buf) +{ + struct uvc_buffer *nextbuf; + unsigned long flags; + + if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) && + buf->buf.length != buf->buf.bytesused) { + buf->state = UVC_BUF_STATE_QUEUED; + buf->buf.bytesused = 0; + return buf; + } + + spin_lock_irqsave(&queue->irqlock, flags); + list_del(&buf->queue); + if (!list_empty(&queue->irqqueue)) + nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer, + queue); + else + nextbuf = NULL; + spin_unlock_irqrestore(&queue->irqlock, flags); + + buf->buf.sequence = queue->sequence++; + do_gettimeofday(&buf->buf.timestamp); + + wake_up(&buf->wait); + return nextbuf; +} diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c new file mode 100644 index 000000000000..be9084e5eace --- /dev/null +++ b/drivers/media/video/uvc/uvc_status.c @@ -0,0 +1,207 @@ +/* + * uvc_status.c -- USB Video Class driver - Status endpoint + * + * Copyright (C) 2007-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include + +#include "uvcvideo.h" + +/* -------------------------------------------------------------------------- + * Input device + */ +static int uvc_input_init(struct uvc_device *dev) +{ + struct usb_device *udev = dev->udev; + struct input_dev *input; + char *phys = NULL; + int ret; + + input = input_allocate_device(); + if (input == NULL) + return -ENOMEM; + + phys = kmalloc(6 + strlen(udev->bus->bus_name) + strlen(udev->devpath), + GFP_KERNEL); + if (phys == NULL) { + ret = -ENOMEM; + goto error; + } + sprintf(phys, "usb-%s-%s", udev->bus->bus_name, udev->devpath); + + input->name = dev->name; + input->phys = phys; + usb_to_input_id(udev, &input->id); + input->dev.parent = &dev->intf->dev; + + set_bit(EV_KEY, input->evbit); + set_bit(BTN_0, input->keybit); + + if ((ret = input_register_device(input)) < 0) + goto error; + + dev->input = input; + return 0; + +error: + input_free_device(input); + kfree(phys); + return ret; +} + +static void uvc_input_cleanup(struct uvc_device *dev) +{ + if (dev->input) + input_unregister_device(dev->input); +} + +/* -------------------------------------------------------------------------- + * Status interrupt endpoint + */ +static void uvc_event_streaming(struct uvc_device *dev, __u8 *data, int len) +{ + if (len < 3) { + uvc_trace(UVC_TRACE_STATUS, "Invalid streaming status event " + "received.\n"); + return; + } + + if (data[2] == 0) { + if (len < 4) + return; + uvc_trace(UVC_TRACE_STATUS, "Button (intf %u) %s len %d\n", + data[1], data[3] ? "pressed" : "released", len); + if (dev->input) + input_report_key(dev->input, BTN_0, data[3]); + } else { + uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x " + "len %d.\n", data[1], data[2], data[3], len); + } +} + +static void uvc_event_control(struct uvc_device *dev, __u8 *data, int len) +{ + char *attrs[3] = { "value", "info", "failure" }; + + if (len < 6 || data[2] != 0 || data[4] > 2) { + uvc_trace(UVC_TRACE_STATUS, "Invalid control status event " + "received.\n"); + return; + } + + uvc_trace(UVC_TRACE_STATUS, "Control %u/%u %s change len %d.\n", + data[1], data[3], attrs[data[4]], len); +} + +static void uvc_status_complete(struct urb *urb) +{ + struct uvc_device *dev = urb->context; + int len, ret; + + switch (urb->status) { + case 0: + break; + + case -ENOENT: /* usb_kill_urb() called. */ + case -ECONNRESET: /* usb_unlink_urb() called. */ + case -ESHUTDOWN: /* The endpoint is being disabled. */ + case -EPROTO: /* Device is disconnected (reported by some + * host controller). */ + return; + + default: + uvc_printk(KERN_WARNING, "Non-zero status (%d) in status " + "completion handler.\n", urb->status); + return; + } + + len = urb->actual_length; + if (len > 0) { + switch (dev->status[0] & 0x0f) { + case UVC_STATUS_TYPE_CONTROL: + uvc_event_control(dev, dev->status, len); + break; + + case UVC_STATUS_TYPE_STREAMING: + uvc_event_streaming(dev, dev->status, len); + break; + + default: + uvc_printk(KERN_INFO, "unknown event type %u.\n", + dev->status[0]); + break; + } + } + + /* Resubmit the URB. */ + urb->interval = dev->int_ep->desc.bInterval; + if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { + uvc_printk(KERN_ERR, "Failed to resubmit status URB (%d).\n", + ret); + } +} + +int uvc_status_init(struct uvc_device *dev) +{ + struct usb_host_endpoint *ep = dev->int_ep; + unsigned int pipe; + int interval; + + if (ep == NULL) + return 0; + + uvc_input_init(dev); + + dev->int_urb = usb_alloc_urb(0, GFP_KERNEL); + if (dev->int_urb == NULL) + return -ENOMEM; + + pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress); + + /* For high-speed interrupt endpoints, the bInterval value is used as + * an exponent of two. Some developers forgot about it. + */ + interval = ep->desc.bInterval; + if (interval > 16 && dev->udev->speed == USB_SPEED_HIGH && + (dev->quirks & UVC_QUIRK_STATUS_INTERVAL)) + interval = fls(interval) - 1; + + usb_fill_int_urb(dev->int_urb, dev->udev, pipe, + dev->status, sizeof dev->status, uvc_status_complete, + dev, interval); + + return usb_submit_urb(dev->int_urb, GFP_KERNEL); +} + +void uvc_status_cleanup(struct uvc_device *dev) +{ + usb_kill_urb(dev->int_urb); + usb_free_urb(dev->int_urb); + uvc_input_cleanup(dev); +} + +int uvc_status_suspend(struct uvc_device *dev) +{ + usb_kill_urb(dev->int_urb); + return 0; +} + +int uvc_status_resume(struct uvc_device *dev) +{ + if (dev->int_urb == NULL) + return 0; + + return usb_submit_urb(dev->int_urb, GFP_KERNEL); +} diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c new file mode 100644 index 000000000000..2e0a66575bb4 --- /dev/null +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -0,0 +1,1105 @@ +/* + * uvc_v4l2.c -- USB Video Class driver - V4L2 API + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "uvcvideo.h" + +/* ------------------------------------------------------------------------ + * V4L2 interface + */ + +/* + * Mapping V4L2 controls to UVC controls can be straighforward if done well. + * Most of the UVC controls exist in V4L2, and can be mapped directly. Some + * must be grouped (for instance the Red Balance, Blue Balance and Do White + * Balance V4L2 controls use the White Balance Component UVC control) or + * otherwise translated. The approach we take here is to use a translation + * table for the controls which can be mapped directly, and handle the others + * manually. + */ +static int uvc_v4l2_query_menu(struct uvc_video_device *video, + struct v4l2_querymenu *query_menu) +{ + struct uvc_menu_info *menu_info; + struct uvc_control_mapping *mapping; + struct uvc_control *ctrl; + + ctrl = uvc_find_control(video, query_menu->id, &mapping); + if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU) + return -EINVAL; + + if (query_menu->index >= mapping->menu_count) + return -EINVAL; + + menu_info = &mapping->menu_info[query_menu->index]; + strncpy(query_menu->name, menu_info->name, 32); + return 0; +} + +/* + * Find the frame interval closest to the requested frame interval for the + * given frame format and size. This should be done by the device as part of + * the Video Probe and Commit negotiation, but some hardware don't implement + * that feature. + */ +static __u32 uvc_try_frame_interval(struct uvc_frame *frame, __u32 interval) +{ + unsigned int i; + + if (frame->bFrameIntervalType) { + __u32 best = -1, dist; + + for (i = 0; i < frame->bFrameIntervalType; ++i) { + dist = interval > frame->dwFrameInterval[i] + ? interval - frame->dwFrameInterval[i] + : frame->dwFrameInterval[i] - interval; + + if (dist > best) + break; + + best = dist; + } + + interval = frame->dwFrameInterval[i-1]; + } else { + const __u32 min = frame->dwFrameInterval[0]; + const __u32 max = frame->dwFrameInterval[1]; + const __u32 step = frame->dwFrameInterval[2]; + + interval = min + (interval - min + step/2) / step * step; + if (interval > max) + interval = max; + } + + return interval; +} + +static int uvc_v4l2_try_format(struct uvc_video_device *video, + struct v4l2_format *fmt, struct uvc_streaming_control *probe, + struct uvc_format **uvc_format, struct uvc_frame **uvc_frame) +{ + struct uvc_format *format = NULL; + struct uvc_frame *frame = NULL; + __u16 rw, rh; + unsigned int d, maxd; + unsigned int i; + __u32 interval; + int ret = 0; + __u8 *fcc; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + fcc = (__u8 *)&fmt->fmt.pix.pixelformat; + uvc_trace(UVC_TRACE_FORMAT, "Trying format 0x%08x (%c%c%c%c): %ux%u.\n", + fmt->fmt.pix.pixelformat, + fcc[0], fcc[1], fcc[2], fcc[3], + fmt->fmt.pix.width, fmt->fmt.pix.height); + + /* Check if the hardware supports the requested format. */ + for (i = 0; i < video->streaming->nformats; ++i) { + format = &video->streaming->format[i]; + if (format->fcc == fmt->fmt.pix.pixelformat) + break; + } + + if (format == NULL || format->fcc != fmt->fmt.pix.pixelformat) { + uvc_trace(UVC_TRACE_FORMAT, "Unsupported format 0x%08x.\n", + fmt->fmt.pix.pixelformat); + return -EINVAL; + } + + /* Find the closest image size. The distance between image sizes is + * the size in pixels of the non-overlapping regions between the + * requested size and the frame-specified size. + */ + rw = fmt->fmt.pix.width; + rh = fmt->fmt.pix.height; + maxd = (unsigned int)-1; + + for (i = 0; i < format->nframes; ++i) { + __u16 w = format->frame[i].wWidth; + __u16 h = format->frame[i].wHeight; + + d = min(w, rw) * min(h, rh); + d = w*h + rw*rh - 2*d; + if (d < maxd) { + maxd = d; + frame = &format->frame[i]; + } + + if (maxd == 0) + break; + } + + if (frame == NULL) { + uvc_trace(UVC_TRACE_FORMAT, "Unsupported size %ux%u.\n", + fmt->fmt.pix.width, fmt->fmt.pix.height); + return -EINVAL; + } + + /* Use the default frame interval. */ + interval = frame->dwDefaultFrameInterval; + uvc_trace(UVC_TRACE_FORMAT, "Using default frame interval %u.%u us " + "(%u.%u fps).\n", interval/10, interval%10, 10000000/interval, + (100000000/interval)%10); + + /* Set the format index, frame index and frame interval. */ + memset(probe, 0, sizeof *probe); + probe->bmHint = 1; /* dwFrameInterval */ + probe->bFormatIndex = format->index; + probe->bFrameIndex = frame->bFrameIndex; + probe->dwFrameInterval = uvc_try_frame_interval(frame, interval); + /* Some webcams stall the probe control set request when the + * dwMaxVideoFrameSize field is set to zero. The UVC specification + * clearly states that the field is read-only from the host, so this + * is a webcam bug. Set dwMaxVideoFrameSize to the value reported by + * the webcam to work around the problem. + * + * The workaround could probably be enabled for all webcams, so the + * quirk can be removed if needed. It's currently useful to detect + * webcam bugs and fix them before they hit the market (providing + * developers test their webcams with the Linux driver as well as with + * the Windows driver). + */ + if (video->dev->quirks & UVC_QUIRK_PROBE_EXTRAFIELDS) + probe->dwMaxVideoFrameSize = + video->streaming->ctrl.dwMaxVideoFrameSize; + + /* Probe the device */ + if ((ret = uvc_probe_video(video, probe)) < 0) + goto done; + + fmt->fmt.pix.width = frame->wWidth; + fmt->fmt.pix.height = frame->wHeight; + fmt->fmt.pix.field = V4L2_FIELD_NONE; + fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8; + fmt->fmt.pix.sizeimage = probe->dwMaxVideoFrameSize; + fmt->fmt.pix.colorspace = format->colorspace; + fmt->fmt.pix.priv = 0; + + if (uvc_format != NULL) + *uvc_format = format; + if (uvc_frame != NULL) + *uvc_frame = frame; + +done: + return ret; +} + +static int uvc_v4l2_get_format(struct uvc_video_device *video, + struct v4l2_format *fmt) +{ + struct uvc_format *format = video->streaming->cur_format; + struct uvc_frame *frame = video->streaming->cur_frame; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (format == NULL || frame == NULL) + return -EINVAL; + + fmt->fmt.pix.pixelformat = format->fcc; + fmt->fmt.pix.width = frame->wWidth; + fmt->fmt.pix.height = frame->wHeight; + fmt->fmt.pix.field = V4L2_FIELD_NONE; + fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8; + fmt->fmt.pix.sizeimage = video->streaming->ctrl.dwMaxVideoFrameSize; + fmt->fmt.pix.colorspace = format->colorspace; + fmt->fmt.pix.priv = 0; + + return 0; +} + +static int uvc_v4l2_set_format(struct uvc_video_device *video, + struct v4l2_format *fmt) +{ + struct uvc_streaming_control probe; + struct uvc_format *format; + struct uvc_frame *frame; + int ret; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (uvc_queue_streaming(&video->queue)) + return -EBUSY; + + ret = uvc_v4l2_try_format(video, fmt, &probe, &format, &frame); + if (ret < 0) + return ret; + + if ((ret = uvc_set_video_ctrl(video, &probe, 0)) < 0) + return ret; + + memcpy(&video->streaming->ctrl, &probe, sizeof probe); + video->streaming->cur_format = format; + video->streaming->cur_frame = frame; + + return 0; +} + +static int uvc_v4l2_get_streamparm(struct uvc_video_device *video, + struct v4l2_streamparm *parm) +{ + uint32_t numerator, denominator; + + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + numerator = video->streaming->ctrl.dwFrameInterval; + denominator = 10000000; + uvc_simplify_fraction(&numerator, &denominator, 8, 333); + + memset(parm, 0, sizeof *parm); + parm->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; + parm->parm.capture.capturemode = 0; + parm->parm.capture.timeperframe.numerator = numerator; + parm->parm.capture.timeperframe.denominator = denominator; + parm->parm.capture.extendedmode = 0; + parm->parm.capture.readbuffers = 0; + + return 0; +} + +static int uvc_v4l2_set_streamparm(struct uvc_video_device *video, + struct v4l2_streamparm *parm) +{ + struct uvc_frame *frame = video->streaming->cur_frame; + struct uvc_streaming_control probe; + uint32_t interval; + int ret; + + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (uvc_queue_streaming(&video->queue)) + return -EBUSY; + + memcpy(&probe, &video->streaming->ctrl, sizeof probe); + interval = uvc_fraction_to_interval( + parm->parm.capture.timeperframe.numerator, + parm->parm.capture.timeperframe.denominator); + + uvc_trace(UVC_TRACE_FORMAT, "Setting frame interval to %u/%u (%u).\n", + parm->parm.capture.timeperframe.numerator, + parm->parm.capture.timeperframe.denominator, + interval); + probe.dwFrameInterval = uvc_try_frame_interval(frame, interval); + + /* Probe the device with the new settings. */ + if ((ret = uvc_probe_video(video, &probe)) < 0) + return ret; + + /* Commit the new settings. */ + if ((ret = uvc_set_video_ctrl(video, &probe, 0)) < 0) + return ret; + + memcpy(&video->streaming->ctrl, &probe, sizeof probe); + + /* Return the actual frame period. */ + parm->parm.capture.timeperframe.numerator = probe.dwFrameInterval; + parm->parm.capture.timeperframe.denominator = 10000000; + uvc_simplify_fraction(&parm->parm.capture.timeperframe.numerator, + &parm->parm.capture.timeperframe.denominator, + 8, 333); + + return 0; +} + +/* ------------------------------------------------------------------------ + * Privilege management + */ + +/* + * Privilege management is the multiple-open implementation basis. The current + * implementation is completely transparent for the end-user and doesn't + * require explicit use of the VIDIOC_G_PRIORITY and VIDIOC_S_PRIORITY ioctls. + * Those ioctls enable finer control on the device (by making possible for a + * user to request exclusive access to a device), but are not mature yet. + * Switching to the V4L2 priority mechanism might be considered in the future + * if this situation changes. + * + * Each open instance of a UVC device can either be in a privileged or + * unprivileged state. Only a single instance can be in a privileged state at + * a given time. Trying to perform an operation which requires privileges will + * automatically acquire the required privileges if possible, or return -EBUSY + * otherwise. Privileges are dismissed when closing the instance. + * + * Operations which require privileges are: + * + * - VIDIOC_S_INPUT + * - VIDIOC_S_PARM + * - VIDIOC_S_FMT + * - VIDIOC_TRY_FMT + * - VIDIOC_REQBUFS + */ +static int uvc_acquire_privileges(struct uvc_fh *handle) +{ + int ret = 0; + + /* Always succeed if the handle is already privileged. */ + if (handle->state == UVC_HANDLE_ACTIVE) + return 0; + + /* Check if the device already has a privileged handle. */ + mutex_lock(&uvc_driver.open_mutex); + if (atomic_inc_return(&handle->device->active) != 1) { + atomic_dec(&handle->device->active); + ret = -EBUSY; + goto done; + } + + handle->state = UVC_HANDLE_ACTIVE; + +done: + mutex_unlock(&uvc_driver.open_mutex); + return ret; +} + +static void uvc_dismiss_privileges(struct uvc_fh *handle) +{ + if (handle->state == UVC_HANDLE_ACTIVE) + atomic_dec(&handle->device->active); + + handle->state = UVC_HANDLE_PASSIVE; +} + +static int uvc_has_privileges(struct uvc_fh *handle) +{ + return handle->state == UVC_HANDLE_ACTIVE; +} + +/* ------------------------------------------------------------------------ + * V4L2 file operations + */ + +static int uvc_v4l2_open(struct inode *inode, struct file *file) +{ + struct video_device *vdev; + struct uvc_video_device *video; + struct uvc_fh *handle; + int ret = 0; + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_open\n"); + mutex_lock(&uvc_driver.open_mutex); + vdev = video_devdata(file); + video = video_get_drvdata(vdev); + + if (video->dev->state & UVC_DEV_DISCONNECTED) { + ret = -ENODEV; + goto done; + } + + ret = usb_autopm_get_interface(video->dev->intf); + if (ret < 0) + goto done; + + /* Create the device handle. */ + handle = kzalloc(sizeof *handle, GFP_KERNEL); + if (handle == NULL) { + usb_autopm_put_interface(video->dev->intf); + ret = -ENOMEM; + goto done; + } + + handle->device = video; + handle->state = UVC_HANDLE_PASSIVE; + file->private_data = handle; + + kref_get(&video->dev->kref); + +done: + mutex_unlock(&uvc_driver.open_mutex); + return ret; +} + +static int uvc_v4l2_release(struct inode *inode, struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_fh *handle = (struct uvc_fh *)file->private_data; + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_release\n"); + + /* Only free resources if this is a privileged handle. */ + if (uvc_has_privileges(handle)) { + uvc_video_enable(video, 0); + + mutex_lock(&video->queue.mutex); + if (uvc_free_buffers(&video->queue) < 0) + uvc_printk(KERN_ERR, "uvc_v4l2_release: Unable to " + "free buffers.\n"); + mutex_unlock(&video->queue.mutex); + } + + /* Release the file handle. */ + uvc_dismiss_privileges(handle); + kfree(handle); + file->private_data = NULL; + + usb_autopm_put_interface(video->dev->intf); + kref_put(&video->dev->kref, uvc_delete); + return 0; +} + +static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_fh *handle = (struct uvc_fh *)file->private_data; + int ret = 0; + + if (uvc_trace_param & UVC_TRACE_IOCTL) + v4l_printk_ioctl(cmd); + + switch (cmd) { + /* Query capabilities */ + case VIDIOC_QUERYCAP: + { + struct v4l2_capability *cap = arg; + + memset(cap, 0, sizeof *cap); + strncpy(cap->driver, "uvcvideo", sizeof cap->driver); + strncpy(cap->card, vdev->name, 32); + strncpy(cap->bus_info, video->dev->udev->bus->bus_name, + sizeof cap->bus_info); + cap->version = DRIVER_VERSION_NUMBER; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE + | V4L2_CAP_STREAMING; + break; + } + + /* Get, Set & Query control */ + case VIDIOC_QUERYCTRL: + return uvc_query_v4l2_ctrl(video, arg); + + case VIDIOC_G_CTRL: + { + struct v4l2_control *ctrl = arg; + struct v4l2_ext_control xctrl; + + memset(&xctrl, 0, sizeof xctrl); + xctrl.id = ctrl->id; + + uvc_ctrl_begin(video); + ret = uvc_ctrl_get(video, &xctrl); + uvc_ctrl_rollback(video); + if (ret >= 0) + ctrl->value = xctrl.value; + break; + } + + case VIDIOC_S_CTRL: + { + struct v4l2_control *ctrl = arg; + struct v4l2_ext_control xctrl; + + memset(&xctrl, 0, sizeof xctrl); + xctrl.id = ctrl->id; + xctrl.value = ctrl->value; + + uvc_ctrl_begin(video); + ret = uvc_ctrl_set(video, &xctrl); + if (ret < 0) { + uvc_ctrl_rollback(video); + return ret; + } + ret = uvc_ctrl_commit(video); + break; + } + + case VIDIOC_QUERYMENU: + return uvc_v4l2_query_menu(video, arg); + + case VIDIOC_G_EXT_CTRLS: + { + struct v4l2_ext_controls *ctrls = arg; + struct v4l2_ext_control *ctrl = ctrls->controls; + unsigned int i; + + uvc_ctrl_begin(video); + for (i = 0; i < ctrls->count; ++ctrl, ++i) { + ret = uvc_ctrl_get(video, ctrl); + if (ret < 0) { + uvc_ctrl_rollback(video); + ctrls->error_idx = i; + return ret; + } + } + ctrls->error_idx = 0; + ret = uvc_ctrl_rollback(video); + break; + } + + case VIDIOC_S_EXT_CTRLS: + case VIDIOC_TRY_EXT_CTRLS: + { + struct v4l2_ext_controls *ctrls = arg; + struct v4l2_ext_control *ctrl = ctrls->controls; + unsigned int i; + + ret = uvc_ctrl_begin(video); + if (ret < 0) + return ret; + + for (i = 0; i < ctrls->count; ++ctrl, ++i) { + ret = uvc_ctrl_set(video, ctrl); + if (ret < 0) { + uvc_ctrl_rollback(video); + ctrls->error_idx = i; + return ret; + } + } + + ctrls->error_idx = 0; + + if (cmd == VIDIOC_S_EXT_CTRLS) + ret = uvc_ctrl_commit(video); + else + ret = uvc_ctrl_rollback(video); + break; + } + + /* Get, Set & Enum input */ + case VIDIOC_ENUMINPUT: + { + const struct uvc_entity *selector = video->selector; + struct v4l2_input *input = arg; + struct uvc_entity *iterm = NULL; + u32 index = input->index; + int pin = 0; + + if (selector == NULL || + (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) { + if (index != 0) + return -EINVAL; + iterm = list_first_entry(&video->iterms, + struct uvc_entity, chain); + pin = iterm->id; + } else if (pin < selector->selector.bNrInPins) { + pin = selector->selector.baSourceID[index]; + list_for_each_entry(iterm, video->iterms.next, chain) { + if (iterm->id == pin) + break; + } + } + + if (iterm == NULL || iterm->id != pin) + return -EINVAL; + + memset(input, 0, sizeof *input); + input->index = index; + strncpy(input->name, iterm->name, sizeof input->name); + if (UVC_ENTITY_TYPE(iterm) == ITT_CAMERA) + input->type = V4L2_INPUT_TYPE_CAMERA; + break; + } + + case VIDIOC_G_INPUT: + { + u8 input; + + if (video->selector == NULL || + (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) { + *(int *)arg = 0; + break; + } + + ret = uvc_query_ctrl(video->dev, GET_CUR, video->selector->id, + video->dev->intfnum, SU_INPUT_SELECT_CONTROL, + &input, 1); + if (ret < 0) + return ret; + + *(int *)arg = input - 1; + break; + } + + case VIDIOC_S_INPUT: + { + u8 input = *(u32 *)arg + 1; + + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + if (video->selector == NULL || + (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) { + if (input != 1) + return -EINVAL; + break; + } + + if (input > video->selector->selector.bNrInPins) + return -EINVAL; + + return uvc_query_ctrl(video->dev, SET_CUR, video->selector->id, + video->dev->intfnum, SU_INPUT_SELECT_CONTROL, + &input, 1); + } + + /* Try, Get, Set & Enum format */ + case VIDIOC_ENUM_FMT: + { + struct v4l2_fmtdesc *fmt = arg; + struct uvc_format *format; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + fmt->index >= video->streaming->nformats) + return -EINVAL; + + format = &video->streaming->format[fmt->index]; + fmt->flags = 0; + if (format->flags & UVC_FMT_FLAG_COMPRESSED) + fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; + strncpy(fmt->description, format->name, + sizeof fmt->description); + fmt->description[sizeof fmt->description - 1] = 0; + fmt->pixelformat = format->fcc; + break; + } + + case VIDIOC_TRY_FMT: + { + struct uvc_streaming_control probe; + + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + return uvc_v4l2_try_format(video, arg, &probe, NULL, NULL); + } + + case VIDIOC_S_FMT: + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + return uvc_v4l2_set_format(video, arg); + + case VIDIOC_G_FMT: + return uvc_v4l2_get_format(video, arg); + + /* Frame size enumeration */ + case VIDIOC_ENUM_FRAMESIZES: + { + struct v4l2_frmsizeenum *fsize = arg; + struct uvc_format *format = NULL; + struct uvc_frame *frame; + int i; + + /* Look for the given pixel format */ + for (i = 0; i < video->streaming->nformats; i++) { + if (video->streaming->format[i].fcc == + fsize->pixel_format) { + format = &video->streaming->format[i]; + break; + } + } + if (format == NULL) + return -EINVAL; + + if (fsize->index >= format->nframes) + return -EINVAL; + + frame = &format->frame[fsize->index]; + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = frame->wWidth; + fsize->discrete.height = frame->wHeight; + break; + } + + /* Frame interval enumeration */ + case VIDIOC_ENUM_FRAMEINTERVALS: + { + struct v4l2_frmivalenum *fival = arg; + struct uvc_format *format = NULL; + struct uvc_frame *frame = NULL; + int i; + + /* Look for the given pixel format and frame size */ + for (i = 0; i < video->streaming->nformats; i++) { + if (video->streaming->format[i].fcc == + fival->pixel_format) { + format = &video->streaming->format[i]; + break; + } + } + if (format == NULL) + return -EINVAL; + + for (i = 0; i < format->nframes; i++) { + if (format->frame[i].wWidth == fival->width && + format->frame[i].wHeight == fival->height) { + frame = &format->frame[i]; + break; + } + } + if (frame == NULL) + return -EINVAL; + + if (frame->bFrameIntervalType) { + if (fival->index >= frame->bFrameIntervalType) + return -EINVAL; + + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; + fival->discrete.numerator = + frame->dwFrameInterval[fival->index]; + fival->discrete.denominator = 10000000; + uvc_simplify_fraction(&fival->discrete.numerator, + &fival->discrete.denominator, 8, 333); + } else { + fival->type = V4L2_FRMIVAL_TYPE_STEPWISE; + fival->stepwise.min.numerator = + frame->dwFrameInterval[0]; + fival->stepwise.min.denominator = 10000000; + fival->stepwise.max.numerator = + frame->dwFrameInterval[1]; + fival->stepwise.max.denominator = 10000000; + fival->stepwise.step.numerator = + frame->dwFrameInterval[2]; + fival->stepwise.step.denominator = 10000000; + uvc_simplify_fraction(&fival->stepwise.min.numerator, + &fival->stepwise.min.denominator, 8, 333); + uvc_simplify_fraction(&fival->stepwise.max.numerator, + &fival->stepwise.max.denominator, 8, 333); + uvc_simplify_fraction(&fival->stepwise.step.numerator, + &fival->stepwise.step.denominator, 8, 333); + } + break; + } + + /* Get & Set streaming parameters */ + case VIDIOC_G_PARM: + return uvc_v4l2_get_streamparm(video, arg); + + case VIDIOC_S_PARM: + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + return uvc_v4l2_set_streamparm(video, arg); + + /* Cropping and scaling */ + case VIDIOC_CROPCAP: + { + struct v4l2_cropcap *ccap = arg; + struct uvc_frame *frame = video->streaming->cur_frame; + + if (ccap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + ccap->bounds.left = 0; + ccap->bounds.top = 0; + ccap->bounds.width = frame->wWidth; + ccap->bounds.height = frame->wHeight; + + ccap->defrect = ccap->bounds; + + ccap->pixelaspect.numerator = 1; + ccap->pixelaspect.denominator = 1; + break; + } + + case VIDIOC_G_CROP: + case VIDIOC_S_CROP: + return -EINVAL; + + /* Buffers & streaming */ + case VIDIOC_REQBUFS: + { + struct v4l2_requestbuffers *rb = arg; + unsigned int bufsize = + video->streaming->ctrl.dwMaxVideoFrameSize; + + if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + rb->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + ret = uvc_alloc_buffers(&video->queue, rb->count, bufsize); + if (ret < 0) + return ret; + + if (!(video->streaming->cur_format->flags & + UVC_FMT_FLAG_COMPRESSED)) + video->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE; + + rb->count = ret; + ret = 0; + break; + } + + case VIDIOC_QUERYBUF: + { + struct v4l2_buffer *buf = arg; + + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_query_buffer(&video->queue, buf); + } + + case VIDIOC_QBUF: + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_queue_buffer(&video->queue, arg); + + case VIDIOC_DQBUF: + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_dequeue_buffer(&video->queue, arg, + file->f_flags & O_NONBLOCK); + + case VIDIOC_STREAMON: + { + int *type = arg; + + if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (!uvc_has_privileges(handle)) + return -EBUSY; + + if ((ret = uvc_video_enable(video, 1)) < 0) + return ret; + break; + } + + case VIDIOC_STREAMOFF: + { + int *type = arg; + + if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_video_enable(video, 0); + } + + /* Analog video standards make no sense for digital cameras. */ + case VIDIOC_ENUMSTD: + case VIDIOC_QUERYSTD: + case VIDIOC_G_STD: + case VIDIOC_S_STD: + + case VIDIOC_OVERLAY: + + case VIDIOC_ENUMAUDIO: + case VIDIOC_ENUMAUDOUT: + + case VIDIOC_ENUMOUTPUT: + uvc_trace(UVC_TRACE_IOCTL, "Unsupported ioctl 0x%08x\n", cmd); + return -EINVAL; + + /* Dynamic controls. */ + case UVCIOC_CTRL_ADD: + { + struct uvc_xu_control_info *xinfo = arg; + struct uvc_control_info *info; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + info = kmalloc(sizeof *info, GFP_KERNEL); + if (info == NULL) + return -ENOMEM; + + memcpy(info->entity, xinfo->entity, sizeof info->entity); + info->index = xinfo->index; + info->selector = xinfo->selector; + info->size = xinfo->size; + info->flags = xinfo->flags; + + info->flags |= UVC_CONTROL_GET_MIN | UVC_CONTROL_GET_MAX | + UVC_CONTROL_GET_RES | UVC_CONTROL_GET_DEF; + + ret = uvc_ctrl_add_info(info); + if (ret < 0) + kfree(info); + break; + } + + case UVCIOC_CTRL_MAP: + { + struct uvc_xu_control_mapping *xmap = arg; + struct uvc_control_mapping *map; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + map = kmalloc(sizeof *map, GFP_KERNEL); + if (map == NULL) + return -ENOMEM; + + map->id = xmap->id; + memcpy(map->name, xmap->name, sizeof map->name); + memcpy(map->entity, xmap->entity, sizeof map->entity); + map->selector = xmap->selector; + map->size = xmap->size; + map->offset = xmap->offset; + map->v4l2_type = xmap->v4l2_type; + map->data_type = xmap->data_type; + + ret = uvc_ctrl_add_mapping(map); + if (ret < 0) + kfree(map); + break; + } + + case UVCIOC_CTRL_GET: + return uvc_xu_ctrl_query(video, arg, 0); + + case UVCIOC_CTRL_SET: + return uvc_xu_ctrl_query(video, arg, 1); + + default: + if ((ret = v4l_compat_translate_ioctl(inode, file, cmd, arg, + uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD) + uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n", + cmd); + return ret; + } + + return ret; +} + +static int uvc_v4l2_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_ioctl\n"); + return video_usercopy(inode, file, cmd, arg, uvc_v4l2_do_ioctl); +} + +static ssize_t uvc_v4l2_read(struct file *file, char __user *data, + size_t count, loff_t *ppos) +{ + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_read: not implemented.\n"); + return -ENODEV; +} + +/* + * VMA operations. + */ +static void uvc_vm_open(struct vm_area_struct *vma) +{ + struct uvc_buffer *buffer = vma->vm_private_data; + buffer->vma_use_count++; +} + +static void uvc_vm_close(struct vm_area_struct *vma) +{ + struct uvc_buffer *buffer = vma->vm_private_data; + buffer->vma_use_count--; +} + +static struct vm_operations_struct uvc_vm_ops = { + .open = uvc_vm_open, + .close = uvc_vm_close, +}; + +static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_buffer *buffer; + struct page *page; + unsigned long addr, start, size; + unsigned int i; + int ret = 0; + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_mmap\n"); + + start = vma->vm_start; + size = vma->vm_end - vma->vm_start; + + mutex_lock(&video->queue.mutex); + + for (i = 0; i < video->queue.count; ++i) { + buffer = &video->queue.buffer[i]; + if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff) + break; + } + + if (i == video->queue.count || size != video->queue.buf_size) { + ret = -EINVAL; + goto done; + } + + /* + * VM_IO marks the area as being an mmaped region for I/O to a + * device. It also prevents the region from being core dumped. + */ + vma->vm_flags |= VM_IO; + + addr = (unsigned long)video->queue.mem + buffer->buf.m.offset; + while (size > 0) { + page = vmalloc_to_page((void *)addr); + if ((ret = vm_insert_page(vma, start, page)) < 0) + goto done; + + start += PAGE_SIZE; + addr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vma->vm_ops = &uvc_vm_ops; + vma->vm_private_data = buffer; + uvc_vm_open(vma); + +done: + mutex_unlock(&video->queue.mutex); + return ret; +} + +static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_poll\n"); + + return uvc_queue_poll(&video->queue, file, wait); +} + +struct file_operations uvc_fops = { + .owner = THIS_MODULE, + .open = uvc_v4l2_open, + .release = uvc_v4l2_release, + .ioctl = uvc_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, + .read = uvc_v4l2_read, + .mmap = uvc_v4l2_mmap, + .poll = uvc_v4l2_poll, +}; diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c new file mode 100644 index 000000000000..6faf1fb21614 --- /dev/null +++ b/drivers/media/video/uvc/uvc_video.c @@ -0,0 +1,934 @@ +/* + * uvc_video.c -- USB Video Class driver - Video handling + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "uvcvideo.h" + +/* ------------------------------------------------------------------------ + * UVC Controls + */ + +static int __uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, + __u8 intfnum, __u8 cs, void *data, __u16 size, + int timeout) +{ + __u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE; + unsigned int pipe; + int ret; + + pipe = (query & 0x80) ? usb_rcvctrlpipe(dev->udev, 0) + : usb_sndctrlpipe(dev->udev, 0); + type |= (query & 0x80) ? USB_DIR_IN : USB_DIR_OUT; + + ret = usb_control_msg(dev->udev, pipe, query, type, cs << 8, + unit << 8 | intfnum, data, size, timeout); + + if (ret != size) { + uvc_printk(KERN_ERR, "Failed to query (%u) UVC control %u " + "(unit %u) : %d (exp. %u).\n", query, cs, unit, ret, + size); + return -EIO; + } + + return 0; +} + +int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, + __u8 intfnum, __u8 cs, void *data, __u16 size) +{ + return __uvc_query_ctrl(dev, query, unit, intfnum, cs, data, size, + UVC_CTRL_CONTROL_TIMEOUT); +} + +static void uvc_fixup_buffer_size(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl) +{ + struct uvc_format *format; + struct uvc_frame *frame; + + if (ctrl->bFormatIndex <= 0 || + ctrl->bFormatIndex > video->streaming->nformats) + return; + + format = &video->streaming->format[ctrl->bFormatIndex - 1]; + + if (ctrl->bFrameIndex <= 0 || + ctrl->bFrameIndex > format->nframes) + return; + + frame = &format->frame[ctrl->bFrameIndex - 1]; + + if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) || + (ctrl->dwMaxVideoFrameSize == 0 && + video->dev->uvc_version < 0x0110)) + ctrl->dwMaxVideoFrameSize = + frame->dwMaxVideoFrameBufferSize; +} + +static int uvc_get_video_ctrl(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl, int probe, __u8 query) +{ + __u8 data[34]; + __u8 size; + int ret; + + size = video->dev->uvc_version >= 0x0110 ? 34 : 26; + ret = __uvc_query_ctrl(video->dev, query, 0, video->streaming->intfnum, + probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size, + UVC_CTRL_STREAMING_TIMEOUT); + + if (ret < 0) + return ret; + + ctrl->bmHint = le16_to_cpup((__le16 *)&data[0]); + ctrl->bFormatIndex = data[2]; + ctrl->bFrameIndex = data[3]; + ctrl->dwFrameInterval = le32_to_cpup((__le32 *)&data[4]); + ctrl->wKeyFrameRate = le16_to_cpup((__le16 *)&data[8]); + ctrl->wPFrameRate = le16_to_cpup((__le16 *)&data[10]); + ctrl->wCompQuality = le16_to_cpup((__le16 *)&data[12]); + ctrl->wCompWindowSize = le16_to_cpup((__le16 *)&data[14]); + ctrl->wDelay = le16_to_cpup((__le16 *)&data[16]); + ctrl->dwMaxVideoFrameSize = + le32_to_cpu(get_unaligned((__le32 *)&data[18])); + ctrl->dwMaxPayloadTransferSize = + le32_to_cpu(get_unaligned((__le32 *)&data[22])); + + if (size == 34) { + ctrl->dwClockFrequency = + le32_to_cpu(get_unaligned((__le32 *)&data[26])); + ctrl->bmFramingInfo = data[30]; + ctrl->bPreferedVersion = data[31]; + ctrl->bMinVersion = data[32]; + ctrl->bMaxVersion = data[33]; + } else { + ctrl->dwClockFrequency = video->dev->clock_frequency; + ctrl->bmFramingInfo = 0; + ctrl->bPreferedVersion = 0; + ctrl->bMinVersion = 0; + ctrl->bMaxVersion = 0; + } + + /* Some broken devices return a null or wrong dwMaxVideoFrameSize. + * Try to get the value from the format and frame descriptor. + */ + uvc_fixup_buffer_size(video, ctrl); + + return 0; +} + +int uvc_set_video_ctrl(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl, int probe) +{ + __u8 data[34]; + __u8 size; + + size = video->dev->uvc_version >= 0x0110 ? 34 : 26; + memset(data, 0, sizeof data); + + *(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint); + data[2] = ctrl->bFormatIndex; + data[3] = ctrl->bFrameIndex; + *(__le32 *)&data[4] = cpu_to_le32(ctrl->dwFrameInterval); + *(__le16 *)&data[8] = cpu_to_le16(ctrl->wKeyFrameRate); + *(__le16 *)&data[10] = cpu_to_le16(ctrl->wPFrameRate); + *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality); + *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize); + *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay); + /* Note: Some of the fields below are not required for IN devices (see + * UVC spec, 4.3.1.1), but we still copy them in case support for OUT + * devices is added in the future. */ + put_unaligned(cpu_to_le32(ctrl->dwMaxVideoFrameSize), + (__le32 *)&data[18]); + put_unaligned(cpu_to_le32(ctrl->dwMaxPayloadTransferSize), + (__le32 *)&data[22]); + + if (size == 34) { + put_unaligned(cpu_to_le32(ctrl->dwClockFrequency), + (__le32 *)&data[26]); + data[30] = ctrl->bmFramingInfo; + data[31] = ctrl->bPreferedVersion; + data[32] = ctrl->bMinVersion; + data[33] = ctrl->bMaxVersion; + } + + return __uvc_query_ctrl(video->dev, SET_CUR, 0, + video->streaming->intfnum, + probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size, + UVC_CTRL_STREAMING_TIMEOUT); +} + +int uvc_probe_video(struct uvc_video_device *video, + struct uvc_streaming_control *probe) +{ + struct uvc_streaming_control probe_min, probe_max; + __u16 bandwidth; + unsigned int i; + int ret; + + mutex_lock(&video->streaming->mutex); + + /* Perform probing. The device should adjust the requested values + * according to its capabilities. However, some devices, namely the + * first generation UVC Logitech webcams, don't implement the Video + * Probe control properly, and just return the needed bandwidth. For + * that reason, if the needed bandwidth exceeds the maximum available + * bandwidth, try to lower the quality. + */ + if ((ret = uvc_set_video_ctrl(video, probe, 1)) < 0) + goto done; + + /* Get the minimum and maximum values for compression settings. */ + if (!(video->dev->quirks & UVC_QUIRK_PROBE_MINMAX)) { + ret = uvc_get_video_ctrl(video, &probe_min, 1, GET_MIN); + if (ret < 0) + goto done; + ret = uvc_get_video_ctrl(video, &probe_max, 1, GET_MAX); + if (ret < 0) + goto done; + + probe->wCompQuality = probe_max.wCompQuality; + } + + for (i = 0; i < 2; ++i) { + if ((ret = uvc_set_video_ctrl(video, probe, 1)) < 0 || + (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0) + goto done; + + if (video->streaming->intf->num_altsetting == 1) + break; + + bandwidth = probe->dwMaxPayloadTransferSize; + if (bandwidth <= video->streaming->maxpsize) + break; + + if (video->dev->quirks & UVC_QUIRK_PROBE_MINMAX) { + ret = -ENOSPC; + goto done; + } + + /* TODO: negotiate compression parameters */ + probe->wKeyFrameRate = probe_min.wKeyFrameRate; + probe->wPFrameRate = probe_min.wPFrameRate; + probe->wCompQuality = probe_max.wCompQuality; + probe->wCompWindowSize = probe_min.wCompWindowSize; + } + +done: + mutex_unlock(&video->streaming->mutex); + return ret; +} + +/* ------------------------------------------------------------------------ + * Video codecs + */ + +/* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */ +#define UVC_STREAM_EOH (1 << 7) +#define UVC_STREAM_ERR (1 << 6) +#define UVC_STREAM_STI (1 << 5) +#define UVC_STREAM_RES (1 << 4) +#define UVC_STREAM_SCR (1 << 3) +#define UVC_STREAM_PTS (1 << 2) +#define UVC_STREAM_EOF (1 << 1) +#define UVC_STREAM_FID (1 << 0) + +/* Video payload decoding is handled by uvc_video_decode_start(), + * uvc_video_decode_data() and uvc_video_decode_end(). + * + * uvc_video_decode_start is called with URB data at the start of a bulk or + * isochronous payload. It processes header data and returns the header size + * in bytes if successful. If an error occurs, it returns a negative error + * code. The following error codes have special meanings. + * + * - EAGAIN informs the caller that the current video buffer should be marked + * as done, and that the function should be called again with the same data + * and a new video buffer. This is used when end of frame conditions can be + * reliably detected at the beginning of the next frame only. + * + * If an error other than -EAGAIN is returned, the caller will drop the current + * payload. No call to uvc_video_decode_data and uvc_video_decode_end will be + * made until the next payload. -ENODATA can be used to drop the current + * payload if no other error code is appropriate. + * + * uvc_video_decode_data is called for every URB with URB data. It copies the + * data to the video buffer. + * + * uvc_video_decode_end is called with header data at the end of a bulk or + * isochronous payload. It performs any additional header data processing and + * returns 0 or a negative error code if an error occured. As header data have + * already been processed by uvc_video_decode_start, this functions isn't + * required to perform sanity checks a second time. + * + * For isochronous transfers where a payload is always transfered in a single + * URB, the three functions will be called in a row. + * + * To let the decoder process header data and update its internal state even + * when no video buffer is available, uvc_video_decode_start must be prepared + * to be called with a NULL buf parameter. uvc_video_decode_data and + * uvc_video_decode_end will never be called with a NULL buffer. + */ +static int uvc_video_decode_start(struct uvc_video_device *video, + struct uvc_buffer *buf, const __u8 *data, int len) +{ + __u8 fid; + + /* Sanity checks: + * - packet must be at least 2 bytes long + * - bHeaderLength value must be at least 2 bytes (see above) + * - bHeaderLength value can't be larger than the packet size. + */ + if (len < 2 || data[0] < 2 || data[0] > len) + return -EINVAL; + + /* Skip payloads marked with the error bit ("error frames"). */ + if (data[1] & UVC_STREAM_ERR) { + uvc_trace(UVC_TRACE_FRAME, "Dropping payload (error bit " + "set).\n"); + return -ENODATA; + } + + fid = data[1] & UVC_STREAM_FID; + + /* Store the payload FID bit and return immediately when the buffer is + * NULL. + */ + if (buf == NULL) { + video->last_fid = fid; + return -ENODATA; + } + + /* Synchronize to the input stream by waiting for the FID bit to be + * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE. + * queue->last_fid is initialized to -1, so the first isochronous + * frame will always be in sync. + * + * If the device doesn't toggle the FID bit, invert video->last_fid + * when the EOF bit is set to force synchronisation on the next packet. + */ + if (buf->state != UVC_BUF_STATE_ACTIVE) { + if (fid == video->last_fid) { + uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of " + "sync).\n"); + if ((video->dev->quirks & UVC_QUIRK_STREAM_NO_FID) && + (data[1] & UVC_STREAM_EOF)) + video->last_fid ^= UVC_STREAM_FID; + return -ENODATA; + } + + /* TODO: Handle PTS and SCR. */ + buf->state = UVC_BUF_STATE_ACTIVE; + } + + /* Mark the buffer as done if we're at the beginning of a new frame. + * End of frame detection is better implemented by checking the EOF + * bit (FID bit toggling is delayed by one frame compared to the EOF + * bit), but some devices don't set the bit at end of frame (and the + * last payload can be lost anyway). We thus must check if the FID has + * been toggled. + * + * queue->last_fid is initialized to -1, so the first isochronous + * frame will never trigger an end of frame detection. + * + * Empty buffers (bytesused == 0) don't trigger end of frame detection + * as it doesn't make sense to return an empty buffer. This also + * avoids detecting and of frame conditions at FID toggling if the + * previous payload had the EOF bit set. + */ + if (fid != video->last_fid && buf->buf.bytesused != 0) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit " + "toggled).\n"); + buf->state = UVC_BUF_STATE_DONE; + return -EAGAIN; + } + + video->last_fid = fid; + + return data[0]; +} + +static void uvc_video_decode_data(struct uvc_video_device *video, + struct uvc_buffer *buf, const __u8 *data, int len) +{ + struct uvc_video_queue *queue = &video->queue; + unsigned int maxlen, nbytes; + void *mem; + + if (len <= 0) + return; + + /* Copy the video data to the buffer. */ + maxlen = buf->buf.length - buf->buf.bytesused; + mem = queue->mem + buf->buf.m.offset + buf->buf.bytesused; + nbytes = min((unsigned int)len, maxlen); + memcpy(mem, data, nbytes); + buf->buf.bytesused += nbytes; + + /* Complete the current frame if the buffer size was exceeded. */ + if (len > maxlen) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n"); + buf->state = UVC_BUF_STATE_DONE; + } +} + +static void uvc_video_decode_end(struct uvc_video_device *video, + struct uvc_buffer *buf, const __u8 *data, int len) +{ + /* Mark the buffer as done if the EOF marker is set. */ + if (data[1] & UVC_STREAM_EOF && buf->buf.bytesused != 0) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); + if (data[0] == len) + uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n"); + buf->state = UVC_BUF_STATE_DONE; + if (video->dev->quirks & UVC_QUIRK_STREAM_NO_FID) + video->last_fid ^= UVC_STREAM_FID; + } +} + +/* ------------------------------------------------------------------------ + * URB handling + */ + +/* + * Completion handler for video URBs. + */ +static void uvc_video_decode_isoc(struct urb *urb, + struct uvc_video_device *video, struct uvc_buffer *buf) +{ + u8 *mem; + int ret, i; + + for (i = 0; i < urb->number_of_packets; ++i) { + if (urb->iso_frame_desc[i].status < 0) { + uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame " + "lost (%d).\n", urb->iso_frame_desc[i].status); + continue; + } + + /* Decode the payload header. */ + mem = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + do { + ret = uvc_video_decode_start(video, buf, mem, + urb->iso_frame_desc[i].actual_length); + if (ret == -EAGAIN) + buf = uvc_queue_next_buffer(&video->queue, buf); + } while (ret == -EAGAIN); + + if (ret < 0) + continue; + + /* Decode the payload data. */ + uvc_video_decode_data(video, buf, mem + ret, + urb->iso_frame_desc[i].actual_length - ret); + + /* Process the header again. */ + uvc_video_decode_end(video, buf, mem, ret); + + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + buf = uvc_queue_next_buffer(&video->queue, buf); + } +} + +static void uvc_video_decode_bulk(struct urb *urb, + struct uvc_video_device *video, struct uvc_buffer *buf) +{ + u8 *mem; + int len, ret; + + mem = urb->transfer_buffer; + len = urb->actual_length; + video->bulk.payload_size += len; + + /* If the URB is the first of its payload, decode and save the + * header. + */ + if (video->bulk.header_size == 0) { + do { + ret = uvc_video_decode_start(video, buf, mem, len); + if (ret == -EAGAIN) + buf = uvc_queue_next_buffer(&video->queue, buf); + } while (ret == -EAGAIN); + + /* If an error occured skip the rest of the payload. */ + if (ret < 0 || buf == NULL) { + video->bulk.skip_payload = 1; + return; + } + + video->bulk.header_size = ret; + memcpy(video->bulk.header, mem, video->bulk.header_size); + + mem += ret; + len -= ret; + } + + /* The buffer queue might have been cancelled while a bulk transfer + * was in progress, so we can reach here with buf equal to NULL. Make + * sure buf is never dereferenced if NULL. + */ + + /* Process video data. */ + if (!video->bulk.skip_payload && buf != NULL) + uvc_video_decode_data(video, buf, mem, len); + + /* Detect the payload end by a URB smaller than the maximum size (or + * a payload size equal to the maximum) and process the header again. + */ + if (urb->actual_length < urb->transfer_buffer_length || + video->bulk.payload_size >= video->bulk.max_payload_size) { + if (!video->bulk.skip_payload && buf != NULL) { + uvc_video_decode_end(video, buf, video->bulk.header, + video->bulk.header_size); + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + buf = uvc_queue_next_buffer(&video->queue, buf); + } + + video->bulk.header_size = 0; + video->bulk.skip_payload = 0; + video->bulk.payload_size = 0; + } +} + +static void uvc_video_complete(struct urb *urb) +{ + struct uvc_video_device *video = urb->context; + struct uvc_video_queue *queue = &video->queue; + struct uvc_buffer *buf = NULL; + unsigned long flags; + int ret; + + switch (urb->status) { + case 0: + break; + + default: + uvc_printk(KERN_WARNING, "Non-zero status (%d) in video " + "completion handler.\n", urb->status); + + case -ENOENT: /* usb_kill_urb() called. */ + if (video->frozen) + return; + + case -ECONNRESET: /* usb_unlink_urb() called. */ + case -ESHUTDOWN: /* The endpoint is being disabled. */ + uvc_queue_cancel(queue, urb->status == -ESHUTDOWN); + return; + } + + spin_lock_irqsave(&queue->irqlock, flags); + if (!list_empty(&queue->irqqueue)) + buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, + queue); + spin_unlock_irqrestore(&queue->irqlock, flags); + + video->decode(urb, video, buf); + + if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { + uvc_printk(KERN_ERR, "Failed to resubmit video URB (%d).\n", + ret); + } +} + +/* + * Uninitialize isochronous/bulk URBs and free transfer buffers. + */ +static void uvc_uninit_video(struct uvc_video_device *video) +{ + struct urb *urb; + unsigned int i; + + for (i = 0; i < UVC_URBS; ++i) { + if ((urb = video->urb[i]) == NULL) + continue; + + usb_kill_urb(urb); + /* urb->transfer_buffer_length is not touched by USB core, so + * we can use it here as the buffer length. + */ + if (video->urb_buffer[i]) { + usb_buffer_free(video->dev->udev, + urb->transfer_buffer_length, + video->urb_buffer[i], urb->transfer_dma); + video->urb_buffer[i] = NULL; + } + + usb_free_urb(urb); + video->urb[i] = NULL; + } +} + +/* + * Initialize isochronous URBs and allocate transfer buffers. The packet size + * is given by the endpoint. + */ +static int uvc_init_video_isoc(struct uvc_video_device *video, + struct usb_host_endpoint *ep) +{ + struct urb *urb; + unsigned int npackets, i, j; + __u16 psize; + __u32 size; + + /* Compute the number of isochronous packets to allocate by dividing + * the maximum video frame size by the packet size. Limit the result + * to UVC_MAX_ISO_PACKETS. + */ + psize = le16_to_cpu(ep->desc.wMaxPacketSize); + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + + size = video->streaming->ctrl.dwMaxVideoFrameSize; + if (size > UVC_MAX_FRAME_SIZE) + return -EINVAL; + + npackets = (size + psize - 1) / psize; + if (npackets > UVC_MAX_ISO_PACKETS) + npackets = UVC_MAX_ISO_PACKETS; + + size = npackets * psize; + + for (i = 0; i < UVC_URBS; ++i) { + urb = usb_alloc_urb(npackets, GFP_KERNEL); + if (urb == NULL) { + uvc_uninit_video(video); + return -ENOMEM; + } + + video->urb_buffer[i] = usb_buffer_alloc(video->dev->udev, + size, GFP_KERNEL, &urb->transfer_dma); + if (video->urb_buffer[i] == NULL) { + usb_free_urb(urb); + uvc_uninit_video(video); + return -ENOMEM; + } + + urb->dev = video->dev->udev; + urb->context = video; + urb->pipe = usb_rcvisocpipe(video->dev->udev, + ep->desc.bEndpointAddress); + urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; + urb->interval = ep->desc.bInterval; + urb->transfer_buffer = video->urb_buffer[i]; + urb->complete = uvc_video_complete; + urb->number_of_packets = npackets; + urb->transfer_buffer_length = size; + + for (j = 0; j < npackets; ++j) { + urb->iso_frame_desc[j].offset = j * psize; + urb->iso_frame_desc[j].length = psize; + } + + video->urb[i] = urb; + } + + return 0; +} + +/* + * Initialize bulk URBs and allocate transfer buffers. The packet size is + * given by the endpoint. + */ +static int uvc_init_video_bulk(struct uvc_video_device *video, + struct usb_host_endpoint *ep) +{ + struct urb *urb; + unsigned int pipe, i; + __u16 psize; + __u32 size; + + /* Compute the bulk URB size. Some devices set the maximum payload + * size to a value too high for memory-constrained devices. We must + * then transfer the payload accross multiple URBs. To be consistant + * with isochronous mode, allocate maximum UVC_MAX_ISO_PACKETS per bulk + * URB. + */ + psize = le16_to_cpu(ep->desc.wMaxPacketSize) & 0x07ff; + size = video->streaming->ctrl.dwMaxPayloadTransferSize; + video->bulk.max_payload_size = size; + if (size > psize * UVC_MAX_ISO_PACKETS) + size = psize * UVC_MAX_ISO_PACKETS; + + pipe = usb_rcvbulkpipe(video->dev->udev, ep->desc.bEndpointAddress); + + for (i = 0; i < UVC_URBS; ++i) { + urb = usb_alloc_urb(0, GFP_KERNEL); + if (urb == NULL) { + uvc_uninit_video(video); + return -ENOMEM; + } + + video->urb_buffer[i] = usb_buffer_alloc(video->dev->udev, + size, GFP_KERNEL, &urb->transfer_dma); + if (video->urb_buffer[i] == NULL) { + usb_free_urb(urb); + uvc_uninit_video(video); + return -ENOMEM; + } + + usb_fill_bulk_urb(urb, video->dev->udev, pipe, + video->urb_buffer[i], size, uvc_video_complete, + video); + urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; + + video->urb[i] = urb; + } + + return 0; +} + +/* + * Initialize isochronous/bulk URBs and allocate transfer buffers. + */ +static int uvc_init_video(struct uvc_video_device *video) +{ + struct usb_interface *intf = video->streaming->intf; + struct usb_host_interface *alts; + struct usb_host_endpoint *ep = NULL; + int intfnum = video->streaming->intfnum; + unsigned int bandwidth, psize, i; + int ret; + + video->last_fid = -1; + video->bulk.header_size = 0; + video->bulk.skip_payload = 0; + video->bulk.payload_size = 0; + + if (intf->num_altsetting > 1) { + /* Isochronous endpoint, select the alternate setting. */ + bandwidth = video->streaming->ctrl.dwMaxPayloadTransferSize; + + if (bandwidth == 0) { + uvc_printk(KERN_WARNING, "device %s requested null " + "bandwidth, defaulting to lowest.\n", + video->vdev->name); + bandwidth = 1; + } + + for (i = 0; i < intf->num_altsetting; ++i) { + alts = &intf->altsetting[i]; + ep = uvc_find_endpoint(alts, + video->streaming->header.bEndpointAddress); + if (ep == NULL) + continue; + + /* Check if the bandwidth is high enough. */ + psize = le16_to_cpu(ep->desc.wMaxPacketSize); + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + if (psize >= bandwidth) + break; + } + + if (i >= intf->num_altsetting) + return -EIO; + + if ((ret = usb_set_interface(video->dev->udev, intfnum, i)) < 0) + return ret; + + ret = uvc_init_video_isoc(video, ep); + } else { + /* Bulk endpoint, proceed to URB initialization. */ + ep = uvc_find_endpoint(&intf->altsetting[0], + video->streaming->header.bEndpointAddress); + if (ep == NULL) + return -EIO; + + ret = uvc_init_video_bulk(video, ep); + } + + if (ret < 0) + return ret; + + /* Submit the URBs. */ + for (i = 0; i < UVC_URBS; ++i) { + if ((ret = usb_submit_urb(video->urb[i], GFP_KERNEL)) < 0) { + uvc_printk(KERN_ERR, "Failed to submit URB %u " + "(%d).\n", i, ret); + uvc_uninit_video(video); + return ret; + } + } + + return 0; +} + +/* -------------------------------------------------------------------------- + * Suspend/resume + */ + +/* + * Stop streaming without disabling the video queue. + * + * To let userspace applications resume without trouble, we must not touch the + * video buffers in any way. We mark the device as frozen to make sure the URB + * completion handler won't try to cancel the queue when we kill the URBs. + */ +int uvc_video_suspend(struct uvc_video_device *video) +{ + if (!uvc_queue_streaming(&video->queue)) + return 0; + + video->frozen = 1; + uvc_uninit_video(video); + usb_set_interface(video->dev->udev, video->streaming->intfnum, 0); + return 0; +} + +/* + * Reconfigure the video interface and restart streaming if it was enable + * before suspend. + * + * If an error occurs, disable the video queue. This will wake all pending + * buffers, making sure userspace applications are notified of the problem + * instead of waiting forever. + */ +int uvc_video_resume(struct uvc_video_device *video) +{ + int ret; + + video->frozen = 0; + + if ((ret = uvc_set_video_ctrl(video, &video->streaming->ctrl, 0)) < 0) { + uvc_queue_enable(&video->queue, 0); + return ret; + } + + if (!uvc_queue_streaming(&video->queue)) + return 0; + + if ((ret = uvc_init_video(video)) < 0) + uvc_queue_enable(&video->queue, 0); + + return ret; +} + +/* ------------------------------------------------------------------------ + * Video device + */ + +/* + * Initialize the UVC video device by retrieving the default format and + * committing it. + * + * Some cameras (namely the Fuji Finepix) set the format and frame + * indexes to zero. The UVC standard doesn't clearly make this a spec + * violation, so try to silently fix the values if possible. + * + * This function is called before registering the device with V4L. + */ +int uvc_video_init(struct uvc_video_device *video) +{ + struct uvc_streaming_control *probe = &video->streaming->ctrl; + struct uvc_format *format = NULL; + struct uvc_frame *frame = NULL; + unsigned int i; + int ret; + + if (video->streaming->nformats == 0) { + uvc_printk(KERN_INFO, "No supported video formats found.\n"); + return -EINVAL; + } + + /* Alternate setting 0 should be the default, yet the XBox Live Vision + * Cam (and possibly other devices) crash or otherwise misbehave if + * they don't receive a SET_INTERFACE request before any other video + * control request. + */ + usb_set_interface(video->dev->udev, video->streaming->intfnum, 0); + + /* Some webcams don't suport GET_DEF request on the probe control. We + * fall back to GET_CUR if GET_DEF fails. + */ + if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_DEF)) < 0 && + (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0) + return ret; + + /* Check if the default format descriptor exists. Use the first + * available format otherwise. + */ + for (i = video->streaming->nformats; i > 0; --i) { + format = &video->streaming->format[i-1]; + if (format->index == probe->bFormatIndex) + break; + } + + if (format->nframes == 0) { + uvc_printk(KERN_INFO, "No frame descriptor found for the " + "default format.\n"); + return -EINVAL; + } + + /* Zero bFrameIndex might be correct. Stream-based formats (including + * MPEG-2 TS and DV) do not support frames but have a dummy frame + * descriptor with bFrameIndex set to zero. If the default frame + * descriptor is not found, use the first avalable frame. + */ + for (i = format->nframes; i > 0; --i) { + frame = &format->frame[i-1]; + if (frame->bFrameIndex == probe->bFrameIndex) + break; + } + + /* Commit the default settings. */ + probe->bFormatIndex = format->index; + probe->bFrameIndex = frame->bFrameIndex; + if ((ret = uvc_set_video_ctrl(video, probe, 0)) < 0) + return ret; + + video->streaming->cur_format = format; + video->streaming->cur_frame = frame; + atomic_set(&video->active, 0); + + /* Select the video decoding function */ + if (video->dev->quirks & UVC_QUIRK_BUILTIN_ISIGHT) + video->decode = uvc_video_decode_isight; + else if (video->streaming->intf->num_altsetting > 1) + video->decode = uvc_video_decode_isoc; + else + video->decode = uvc_video_decode_bulk; + + return 0; +} + +/* + * Enable or disable the video stream. + */ +int uvc_video_enable(struct uvc_video_device *video, int enable) +{ + int ret; + + if (!enable) { + uvc_uninit_video(video); + usb_set_interface(video->dev->udev, + video->streaming->intfnum, 0); + uvc_queue_enable(&video->queue, 0); + return 0; + } + + if ((ret = uvc_queue_enable(&video->queue, 1)) < 0) + return ret; + + return uvc_init_video(video); +} diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h new file mode 100644 index 000000000000..a995a780db1c --- /dev/null +++ b/drivers/media/video/uvc/uvcvideo.h @@ -0,0 +1,796 @@ +#ifndef _USB_VIDEO_H_ +#define _USB_VIDEO_H_ + +#include +#include + + +/* + * Dynamic controls + */ + +/* Data types for UVC control data */ +#define UVC_CTRL_DATA_TYPE_RAW 0 +#define UVC_CTRL_DATA_TYPE_SIGNED 1 +#define UVC_CTRL_DATA_TYPE_UNSIGNED 2 +#define UVC_CTRL_DATA_TYPE_BOOLEAN 3 +#define UVC_CTRL_DATA_TYPE_ENUM 4 +#define UVC_CTRL_DATA_TYPE_BITMASK 5 + +/* Control flags */ +#define UVC_CONTROL_SET_CUR (1 << 0) +#define UVC_CONTROL_GET_CUR (1 << 1) +#define UVC_CONTROL_GET_MIN (1 << 2) +#define UVC_CONTROL_GET_MAX (1 << 3) +#define UVC_CONTROL_GET_RES (1 << 4) +#define UVC_CONTROL_GET_DEF (1 << 5) +/* Control should be saved at suspend and restored at resume. */ +#define UVC_CONTROL_RESTORE (1 << 6) +/* Control can be updated by the camera. */ +#define UVC_CONTROL_AUTO_UPDATE (1 << 7) + +#define UVC_CONTROL_GET_RANGE (UVC_CONTROL_GET_CUR | UVC_CONTROL_GET_MIN | \ + UVC_CONTROL_GET_MAX | UVC_CONTROL_GET_RES | \ + UVC_CONTROL_GET_DEF) + +struct uvc_xu_control_info { + __u8 entity[16]; + __u8 index; + __u8 selector; + __u16 size; + __u32 flags; +}; + +struct uvc_xu_control_mapping { + __u32 id; + __u8 name[32]; + __u8 entity[16]; + __u8 selector; + + __u8 size; + __u8 offset; + enum v4l2_ctrl_type v4l2_type; + __u32 data_type; +}; + +struct uvc_xu_control { + __u8 unit; + __u8 selector; + __u16 size; + __u8 __user *data; +}; + +#define UVCIOC_CTRL_ADD _IOW('U', 1, struct uvc_xu_control_info) +#define UVCIOC_CTRL_MAP _IOWR('U', 2, struct uvc_xu_control_mapping) +#define UVCIOC_CTRL_GET _IOWR('U', 3, struct uvc_xu_control) +#define UVCIOC_CTRL_SET _IOW('U', 4, struct uvc_xu_control) + +#ifdef __KERNEL__ + +#include + +/* -------------------------------------------------------------------------- + * UVC constants + */ + +#define SC_UNDEFINED 0x00 +#define SC_VIDEOCONTROL 0x01 +#define SC_VIDEOSTREAMING 0x02 +#define SC_VIDEO_INTERFACE_COLLECTION 0x03 + +#define PC_PROTOCOL_UNDEFINED 0x00 + +#define CS_UNDEFINED 0x20 +#define CS_DEVICE 0x21 +#define CS_CONFIGURATION 0x22 +#define CS_STRING 0x23 +#define CS_INTERFACE 0x24 +#define CS_ENDPOINT 0x25 + +/* VideoControl class specific interface descriptor */ +#define VC_DESCRIPTOR_UNDEFINED 0x00 +#define VC_HEADER 0x01 +#define VC_INPUT_TERMINAL 0x02 +#define VC_OUTPUT_TERMINAL 0x03 +#define VC_SELECTOR_UNIT 0x04 +#define VC_PROCESSING_UNIT 0x05 +#define VC_EXTENSION_UNIT 0x06 + +/* VideoStreaming class specific interface descriptor */ +#define VS_UNDEFINED 0x00 +#define VS_INPUT_HEADER 0x01 +#define VS_OUTPUT_HEADER 0x02 +#define VS_STILL_IMAGE_FRAME 0x03 +#define VS_FORMAT_UNCOMPRESSED 0x04 +#define VS_FRAME_UNCOMPRESSED 0x05 +#define VS_FORMAT_MJPEG 0x06 +#define VS_FRAME_MJPEG 0x07 +#define VS_FORMAT_MPEG2TS 0x0a +#define VS_FORMAT_DV 0x0c +#define VS_COLORFORMAT 0x0d +#define VS_FORMAT_FRAME_BASED 0x10 +#define VS_FRAME_FRAME_BASED 0x11 +#define VS_FORMAT_STREAM_BASED 0x12 + +/* Endpoint type */ +#define EP_UNDEFINED 0x00 +#define EP_GENERAL 0x01 +#define EP_ENDPOINT 0x02 +#define EP_INTERRUPT 0x03 + +/* Request codes */ +#define RC_UNDEFINED 0x00 +#define SET_CUR 0x01 +#define GET_CUR 0x81 +#define GET_MIN 0x82 +#define GET_MAX 0x83 +#define GET_RES 0x84 +#define GET_LEN 0x85 +#define GET_INFO 0x86 +#define GET_DEF 0x87 + +/* VideoControl interface controls */ +#define VC_CONTROL_UNDEFINED 0x00 +#define VC_VIDEO_POWER_MODE_CONTROL 0x01 +#define VC_REQUEST_ERROR_CODE_CONTROL 0x02 + +/* Terminal controls */ +#define TE_CONTROL_UNDEFINED 0x00 + +/* Selector Unit controls */ +#define SU_CONTROL_UNDEFINED 0x00 +#define SU_INPUT_SELECT_CONTROL 0x01 + +/* Camera Terminal controls */ +#define CT_CONTROL_UNDEFINED 0x00 +#define CT_SCANNING_MODE_CONTROL 0x01 +#define CT_AE_MODE_CONTROL 0x02 +#define CT_AE_PRIORITY_CONTROL 0x03 +#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 +#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 +#define CT_FOCUS_ABSOLUTE_CONTROL 0x06 +#define CT_FOCUS_RELATIVE_CONTROL 0x07 +#define CT_FOCUS_AUTO_CONTROL 0x08 +#define CT_IRIS_ABSOLUTE_CONTROL 0x09 +#define CT_IRIS_RELATIVE_CONTROL 0x0a +#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b +#define CT_ZOOM_RELATIVE_CONTROL 0x0c +#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d +#define CT_PANTILT_RELATIVE_CONTROL 0x0e +#define CT_ROLL_ABSOLUTE_CONTROL 0x0f +#define CT_ROLL_RELATIVE_CONTROL 0x10 +#define CT_PRIVACY_CONTROL 0x11 + +/* Processing Unit controls */ +#define PU_CONTROL_UNDEFINED 0x00 +#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 +#define PU_BRIGHTNESS_CONTROL 0x02 +#define PU_CONTRAST_CONTROL 0x03 +#define PU_GAIN_CONTROL 0x04 +#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05 +#define PU_HUE_CONTROL 0x06 +#define PU_SATURATION_CONTROL 0x07 +#define PU_SHARPNESS_CONTROL 0x08 +#define PU_GAMMA_CONTROL 0x09 +#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a +#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b +#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c +#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d +#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e +#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f +#define PU_HUE_AUTO_CONTROL 0x10 +#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 +#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12 + +#define LXU_MOTOR_PANTILT_RELATIVE_CONTROL 0x01 +#define LXU_MOTOR_PANTILT_RESET_CONTROL 0x02 +#define LXU_MOTOR_FOCUS_MOTOR_CONTROL 0x03 + +/* VideoStreaming interface controls */ +#define VS_CONTROL_UNDEFINED 0x00 +#define VS_PROBE_CONTROL 0x01 +#define VS_COMMIT_CONTROL 0x02 +#define VS_STILL_PROBE_CONTROL 0x03 +#define VS_STILL_COMMIT_CONTROL 0x04 +#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 +#define VS_STREAM_ERROR_CODE_CONTROL 0x06 +#define VS_GENERATE_KEY_FRAME_CONTROL 0x07 +#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 +#define VS_SYNC_DELAY_CONTROL 0x09 + +#define TT_VENDOR_SPECIFIC 0x0100 +#define TT_STREAMING 0x0101 + +/* Input Terminal types */ +#define ITT_VENDOR_SPECIFIC 0x0200 +#define ITT_CAMERA 0x0201 +#define ITT_MEDIA_TRANSPORT_INPUT 0x0202 + +/* Output Terminal types */ +#define OTT_VENDOR_SPECIFIC 0x0300 +#define OTT_DISPLAY 0x0301 +#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 + +/* External Terminal types */ +#define EXTERNAL_VENDOR_SPECIFIC 0x0400 +#define COMPOSITE_CONNECTOR 0x0401 +#define SVIDEO_CONNECTOR 0x0402 +#define COMPONENT_CONNECTOR 0x0403 + +#define UVC_TERM_INPUT 0x0000 +#define UVC_TERM_OUTPUT 0x8000 + +#define UVC_ENTITY_TYPE(entity) ((entity)->type & 0x7fff) +#define UVC_ENTITY_IS_UNIT(entity) (((entity)->type & 0xff00) == 0) +#define UVC_ENTITY_IS_TERM(entity) (((entity)->type & 0xff00) != 0) +#define UVC_ENTITY_IS_ITERM(entity) \ + (((entity)->type & 0x8000) == UVC_TERM_INPUT) +#define UVC_ENTITY_IS_OTERM(entity) \ + (((entity)->type & 0x8000) == UVC_TERM_OUTPUT) + +#define UVC_STATUS_TYPE_CONTROL 1 +#define UVC_STATUS_TYPE_STREAMING 2 + +/* ------------------------------------------------------------------------ + * GUIDs + */ +#define UVC_GUID_UVC_CAMERA \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} +#define UVC_GUID_UVC_OUTPUT \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02} +#define UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03} +#define UVC_GUID_UVC_PROCESSING \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01} +#define UVC_GUID_UVC_SELECTOR \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02} + +#define UVC_GUID_LOGITECH_DEV_INFO \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1e} +#define UVC_GUID_LOGITECH_USER_HW \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1f} +#define UVC_GUID_LOGITECH_VIDEO \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x50} +#define UVC_GUID_LOGITECH_MOTOR \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x56} + +#define UVC_GUID_FORMAT_MJPEG \ + { 'M', 'J', 'P', 'G', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_YUY2 \ + { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_NV12 \ + { 'N', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_YV12 \ + { 'Y', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_I420 \ + { 'I', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_UYVY \ + { 'U', 'Y', 'V', 'Y', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y800 \ + { 'Y', '8', '0', '0', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_BY8 \ + { 'B', 'Y', '8', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} + + +/* ------------------------------------------------------------------------ + * Driver specific constants. + */ + +#define DRIVER_VERSION_NUMBER KERNEL_VERSION(0, 1, 0) + +/* Number of isochronous URBs. */ +#define UVC_URBS 5 +/* Maximum number of packets per isochronous URB. */ +#define UVC_MAX_ISO_PACKETS 40 +/* Maximum frame size in bytes, for sanity checking. */ +#define UVC_MAX_FRAME_SIZE (16*1024*1024) +/* Maximum number of video buffers. */ +#define UVC_MAX_VIDEO_BUFFERS 32 + +#define UVC_CTRL_CONTROL_TIMEOUT 300 +#define UVC_CTRL_STREAMING_TIMEOUT 1000 + +/* Devices quirks */ +#define UVC_QUIRK_STATUS_INTERVAL 0x00000001 +#define UVC_QUIRK_PROBE_MINMAX 0x00000002 +#define UVC_QUIRK_PROBE_EXTRAFIELDS 0x00000004 +#define UVC_QUIRK_BUILTIN_ISIGHT 0x00000008 +#define UVC_QUIRK_STREAM_NO_FID 0x00000010 +#define UVC_QUIRK_IGNORE_SELECTOR_UNIT 0x00000020 + +/* Format flags */ +#define UVC_FMT_FLAG_COMPRESSED 0x00000001 +#define UVC_FMT_FLAG_STREAM 0x00000002 + +/* ------------------------------------------------------------------------ + * Structures. + */ + +struct uvc_device; + +/* TODO: Put the most frequently accessed fields at the beginning of + * structures to maximize cache efficiency. + */ +struct uvc_streaming_control { + __u16 bmHint; + __u8 bFormatIndex; + __u8 bFrameIndex; + __u32 dwFrameInterval; + __u16 wKeyFrameRate; + __u16 wPFrameRate; + __u16 wCompQuality; + __u16 wCompWindowSize; + __u16 wDelay; + __u32 dwMaxVideoFrameSize; + __u32 dwMaxPayloadTransferSize; + __u32 dwClockFrequency; + __u8 bmFramingInfo; + __u8 bPreferedVersion; + __u8 bMinVersion; + __u8 bMaxVersion; +}; + +struct uvc_menu_info { + __u32 value; + __u8 name[32]; +}; + +struct uvc_control_info { + struct list_head list; + struct list_head mappings; + + __u8 entity[16]; + __u8 index; + __u8 selector; + + __u16 size; + __u32 flags; +}; + +struct uvc_control_mapping { + struct list_head list; + + struct uvc_control_info *ctrl; + + __u32 id; + __u8 name[32]; + __u8 entity[16]; + __u8 selector; + + __u8 size; + __u8 offset; + enum v4l2_ctrl_type v4l2_type; + __u32 data_type; + + struct uvc_menu_info *menu_info; + __u32 menu_count; +}; + +struct uvc_control { + struct uvc_entity *entity; + struct uvc_control_info *info; + + __u8 index; /* Used to match the uvc_control entry with a + uvc_control_info. */ + __u8 dirty : 1, + loaded : 1, + modified : 1; + + __u8 *data; +}; + +struct uvc_format_desc { + char *name; + __u8 guid[16]; + __u32 fcc; +}; + +/* The term 'entity' refers to both UVC units and UVC terminals. + * + * The type field is either the terminal type (wTerminalType in the terminal + * descriptor), or the unit type (bDescriptorSubtype in the unit descriptor). + * As the bDescriptorSubtype field is one byte long, the type value will + * always have a null MSB for units. All terminal types defined by the UVC + * specification have a non-null MSB, so it is safe to use the MSB to + * differentiate between units and terminals as long as the descriptor parsing + * code makes sure terminal types have a non-null MSB. + * + * For terminals, the type's most significant bit stores the terminal + * direction (either UVC_TERM_INPUT or UVC_TERM_OUTPUT). The type field should + * always be accessed with the UVC_ENTITY_* macros and never directly. + */ + +struct uvc_entity { + struct list_head list; /* Entity as part of a UVC device. */ + struct list_head chain; /* Entity as part of a video device + * chain. */ + __u8 id; + __u16 type; + char name[64]; + + union { + struct { + __u16 wObjectiveFocalLengthMin; + __u16 wObjectiveFocalLengthMax; + __u16 wOcularFocalLength; + __u8 bControlSize; + __u8 *bmControls; + } camera; + + struct { + __u8 bControlSize; + __u8 *bmControls; + __u8 bTransportModeSize; + __u8 *bmTransportModes; + } media; + + struct { + __u8 bSourceID; + } output; + + struct { + __u8 bSourceID; + __u16 wMaxMultiplier; + __u8 bControlSize; + __u8 *bmControls; + __u8 bmVideoStandards; + } processing; + + struct { + __u8 bNrInPins; + __u8 *baSourceID; + } selector; + + struct { + __u8 guidExtensionCode[16]; + __u8 bNumControls; + __u8 bNrInPins; + __u8 *baSourceID; + __u8 bControlSize; + __u8 *bmControls; + __u8 *bmControlsType; + } extension; + }; + + unsigned int ncontrols; + struct uvc_control *controls; +}; + +struct uvc_frame { + __u8 bFrameIndex; + __u8 bmCapabilities; + __u16 wWidth; + __u16 wHeight; + __u32 dwMinBitRate; + __u32 dwMaxBitRate; + __u32 dwMaxVideoFrameBufferSize; + __u8 bFrameIntervalType; + __u32 dwDefaultFrameInterval; + __u32 *dwFrameInterval; +}; + +struct uvc_format { + __u8 type; + __u8 index; + __u8 bpp; + __u8 colorspace; + __u32 fcc; + __u32 flags; + + char name[32]; + + unsigned int nframes; + struct uvc_frame *frame; +}; + +struct uvc_streaming_header { + __u8 bNumFormats; + __u8 bEndpointAddress; + __u8 bTerminalLink; + __u8 bControlSize; + __u8 *bmaControls; + /* The following fields are used by input headers only. */ + __u8 bmInfo; + __u8 bStillCaptureMethod; + __u8 bTriggerSupport; + __u8 bTriggerUsage; +}; + +struct uvc_streaming { + struct list_head list; + + struct usb_interface *intf; + int intfnum; + __u16 maxpsize; + + struct uvc_streaming_header header; + + unsigned int nformats; + struct uvc_format *format; + + struct uvc_streaming_control ctrl; + struct uvc_format *cur_format; + struct uvc_frame *cur_frame; + + struct mutex mutex; +}; + +enum uvc_buffer_state { + UVC_BUF_STATE_IDLE = 0, + UVC_BUF_STATE_QUEUED = 1, + UVC_BUF_STATE_ACTIVE = 2, + UVC_BUF_STATE_DONE = 3, + UVC_BUF_STATE_ERROR = 4, +}; + +struct uvc_buffer { + unsigned long vma_use_count; + struct list_head stream; + + /* Touched by interrupt handler. */ + struct v4l2_buffer buf; + struct list_head queue; + wait_queue_head_t wait; + enum uvc_buffer_state state; +}; + +#define UVC_QUEUE_STREAMING (1 << 0) +#define UVC_QUEUE_DISCONNECTED (1 << 1) +#define UVC_QUEUE_DROP_INCOMPLETE (1 << 2) + +struct uvc_video_queue { + void *mem; + unsigned int flags; + __u32 sequence; + + unsigned int count; + unsigned int buf_size; + struct uvc_buffer buffer[UVC_MAX_VIDEO_BUFFERS]; + struct mutex mutex; /* protects buffers and mainqueue */ + spinlock_t irqlock; /* protects irqqueue */ + + struct list_head mainqueue; + struct list_head irqqueue; +}; + +struct uvc_video_device { + struct uvc_device *dev; + struct video_device *vdev; + atomic_t active; + unsigned int frozen : 1; + + struct list_head iterms; + struct uvc_entity *oterm; + struct uvc_entity *processing; + struct uvc_entity *selector; + struct list_head extensions; + struct mutex ctrl_mutex; + + struct uvc_video_queue queue; + + /* Video streaming object, must always be non-NULL. */ + struct uvc_streaming *streaming; + + void (*decode) (struct urb *urb, struct uvc_video_device *video, + struct uvc_buffer *buf); + + /* Context data used by the bulk completion handler. */ + struct { + __u8 header[256]; + unsigned int header_size; + int skip_payload; + __u32 payload_size; + __u32 max_payload_size; + } bulk; + + struct urb *urb[UVC_URBS]; + char *urb_buffer[UVC_URBS]; + + __u8 last_fid; +}; + +enum uvc_device_state { + UVC_DEV_DISCONNECTED = 1, +}; + +struct uvc_device { + struct usb_device *udev; + struct usb_interface *intf; + __u32 quirks; + int intfnum; + char name[32]; + + enum uvc_device_state state; + struct kref kref; + struct list_head list; + + /* Video control interface */ + __u16 uvc_version; + __u32 clock_frequency; + + struct list_head entities; + + struct uvc_video_device video; + + /* Status Interrupt Endpoint */ + struct usb_host_endpoint *int_ep; + struct urb *int_urb; + __u8 status[16]; + struct input_dev *input; + + /* Video Streaming interfaces */ + struct list_head streaming; +}; + +enum uvc_handle_state { + UVC_HANDLE_PASSIVE = 0, + UVC_HANDLE_ACTIVE = 1, +}; + +struct uvc_fh { + struct uvc_video_device *device; + enum uvc_handle_state state; +}; + +struct uvc_driver { + struct usb_driver driver; + + struct mutex open_mutex; /* protects from open/disconnect race */ + + struct list_head devices; /* struct uvc_device list */ + struct list_head controls; /* struct uvc_control_info list */ + struct mutex ctrl_mutex; /* protects controls and devices + lists */ +}; + +/* ------------------------------------------------------------------------ + * Debugging, printing and logging + */ + +#define UVC_TRACE_PROBE (1 << 0) +#define UVC_TRACE_DESCR (1 << 1) +#define UVC_TRACE_CONTROL (1 << 2) +#define UVC_TRACE_FORMAT (1 << 3) +#define UVC_TRACE_CAPTURE (1 << 4) +#define UVC_TRACE_CALLS (1 << 5) +#define UVC_TRACE_IOCTL (1 << 6) +#define UVC_TRACE_FRAME (1 << 7) +#define UVC_TRACE_SUSPEND (1 << 8) +#define UVC_TRACE_STATUS (1 << 9) + +extern unsigned int uvc_trace_param; + +#define uvc_trace(flag, msg...) \ + do { \ + if (uvc_trace_param & flag) \ + printk(KERN_DEBUG "uvcvideo: " msg); \ + } while (0) + +#define uvc_printk(level, msg...) \ + printk(level "uvcvideo: " msg) + +#define UVC_GUID_FORMAT "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-" \ + "%02x%02x%02x%02x%02x%02x" +#define UVC_GUID_ARGS(guid) \ + (guid)[3], (guid)[2], (guid)[1], (guid)[0], \ + (guid)[5], (guid)[4], \ + (guid)[7], (guid)[6], \ + (guid)[8], (guid)[9], \ + (guid)[10], (guid)[11], (guid)[12], \ + (guid)[13], (guid)[14], (guid)[15] + +/* -------------------------------------------------------------------------- + * Internal functions. + */ + +/* Core driver */ +extern struct uvc_driver uvc_driver; +extern void uvc_delete(struct kref *kref); + +/* Video buffers queue management. */ +extern void uvc_queue_init(struct uvc_video_queue *queue); +extern int uvc_alloc_buffers(struct uvc_video_queue *queue, + unsigned int nbuffers, unsigned int buflength); +extern int uvc_free_buffers(struct uvc_video_queue *queue); +extern int uvc_query_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf); +extern int uvc_queue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf); +extern int uvc_dequeue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf, int nonblocking); +extern int uvc_queue_enable(struct uvc_video_queue *queue, int enable); +extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect); +extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, + struct uvc_buffer *buf); +extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue, + struct file *file, poll_table *wait); +static inline int uvc_queue_streaming(struct uvc_video_queue *queue) +{ + return queue->flags & UVC_QUEUE_STREAMING; +} + +/* V4L2 interface */ +extern struct file_operations uvc_fops; + +/* Video */ +extern int uvc_video_init(struct uvc_video_device *video); +extern int uvc_video_suspend(struct uvc_video_device *video); +extern int uvc_video_resume(struct uvc_video_device *video); +extern int uvc_video_enable(struct uvc_video_device *video, int enable); +extern int uvc_probe_video(struct uvc_video_device *video, + struct uvc_streaming_control *probe); +extern int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, + __u8 intfnum, __u8 cs, void *data, __u16 size); +extern int uvc_set_video_ctrl(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl, int probe); + +/* Status */ +extern int uvc_status_init(struct uvc_device *dev); +extern void uvc_status_cleanup(struct uvc_device *dev); +extern int uvc_status_suspend(struct uvc_device *dev); +extern int uvc_status_resume(struct uvc_device *dev); + +/* Controls */ +extern struct uvc_control *uvc_find_control(struct uvc_video_device *video, + __u32 v4l2_id, struct uvc_control_mapping **mapping); +extern int uvc_query_v4l2_ctrl(struct uvc_video_device *video, + struct v4l2_queryctrl *v4l2_ctrl); + +extern int uvc_ctrl_add_info(struct uvc_control_info *info); +extern int uvc_ctrl_add_mapping(struct uvc_control_mapping *mapping); +extern int uvc_ctrl_init_device(struct uvc_device *dev); +extern void uvc_ctrl_cleanup_device(struct uvc_device *dev); +extern int uvc_ctrl_resume_device(struct uvc_device *dev); +extern void uvc_ctrl_init(void); + +extern int uvc_ctrl_begin(struct uvc_video_device *video); +extern int __uvc_ctrl_commit(struct uvc_video_device *video, int rollback); +static inline int uvc_ctrl_commit(struct uvc_video_device *video) +{ + return __uvc_ctrl_commit(video, 0); +} +static inline int uvc_ctrl_rollback(struct uvc_video_device *video) +{ + return __uvc_ctrl_commit(video, 1); +} + +extern int uvc_ctrl_get(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl); +extern int uvc_ctrl_set(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl); + +extern int uvc_xu_ctrl_query(struct uvc_video_device *video, + struct uvc_xu_control *ctrl, int set); + +/* Utility functions */ +extern void uvc_simplify_fraction(uint32_t *numerator, uint32_t *denominator, + unsigned int n_terms, unsigned int threshold); +extern uint32_t uvc_fraction_to_interval(uint32_t numerator, + uint32_t denominator); +extern struct usb_host_endpoint *uvc_find_endpoint( + struct usb_host_interface *alts, __u8 epaddr); + +/* Quirks support */ +void uvc_video_decode_isight(struct urb *urb, struct uvc_video_device *video, + struct uvc_buffer *buf); + +#endif /* __KERNEL__ */ + +#endif -- cgit v1.2.3 From dd4f0888f8b42a97c93a66617a4f9acaff3089d6 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 30 Jun 2008 15:03:14 -0700 Subject: [IA64] Bugfix for system with 32 cpus On a system where there are no hot pluggable cpus "additional_cpus" is still set to -1 at the point where we call per_cpu_scan_finalize(). If we didn't find an SRAT table and so pick the default "32" for the number of cpus, when we get to: high_cpu = min(high_cpu + reserve_cpus, NR_CPUS); we will end up initializing for just 31 cpus ... and so we will die horribly when bringing up cpu#32. Problem introduced by: 2c6e6db41f01b6b4eb98809350827c9678996698 "Minimize per_cpu reservations." Acked-by: Robin Holt Signed-off-by: Tony Luck --- arch/ia64/kernel/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 4ae15c8c2488..632cda8f2e76 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -547,7 +547,8 @@ setup_arch (char **cmdline_p) # ifdef CONFIG_ACPI_NUMA acpi_numa_init(); per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ? - 32 : cpus_weight(early_cpu_possible_map)), additional_cpus); + 32 : cpus_weight(early_cpu_possible_map)), + additional_cpus > 0 ? additional_cpus : 0); # endif #else # ifdef CONFIG_SMP -- cgit v1.2.3 From 3a677d216445dba3332a000063405de3fc135859 Mon Sep 17 00:00:00 2001 From: Doug Chapman Date: Mon, 30 Jun 2008 15:06:48 -0700 Subject: [IA64] export account_system_vtime The symbol account_system_vtime is used by the kvm module but not exported. This breaks building with CONFIG_VIRT_CPU_ACCOUNTING and CONFIG_KVM=m. Signed-off-by: Doug Chapman Acked-by: Hidetosho Seto Signed-off-by: Tony Luck --- arch/ia64/kernel/time.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 8c73643f2d66..aad1b7b1fff9 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -117,6 +117,7 @@ void account_system_vtime(struct task_struct *tsk) local_irq_restore(flags); } +EXPORT_SYMBOL_GPL(account_system_vtime); /* * Called from the timer interrupt handler to charge accumulated user time -- cgit v1.2.3 From 3a8247cc2c856930f34eafce33f6a039227ee175 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 18 Jun 2008 15:29:12 +1000 Subject: powerpc: Only demote individual slices rather than whole process At present, if we have a kernel with a 64kB page size, and some process maps something that has to be mapped with 4kB pages (such as a cache-inhibited mapping on POWER5+, or the eHCA infiniband queue-pair pages), we change the process to use 4kB pages everywhere. This hurts the performance of HPC programs that access eHCA from userspace. With this patch, the kernel will only demote the slice(s) containing the eHCA or cache-inhibited mappings, leaving the remaining slices able to use 64kB hardware pages. This also changes the slice_get_unmapped_area code so that it is willing to place a 64k-page mapping into (or across) a 4k-page slice if there is no better alternative, i.e. if the program specified MAP_FIXED or if there is not sufficient space available in slices that are either empty or already have 64k-page mappings in them. Signed-off-by: Paul Mackerras Acked-by: Benjamin Herrenschmidt --- arch/powerpc/mm/hash_utils_64.c | 36 +++++-- arch/powerpc/mm/slice.c | 177 +++++++++++++++++++++++++-------- arch/powerpc/platforms/Kconfig.cputype | 2 +- include/asm-powerpc/page_64.h | 6 ++ 4 files changed, 167 insertions(+), 54 deletions(-) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index bf5b6d7ed30f..8d3b58ebd38e 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -695,6 +695,28 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap) return pp; } +#ifdef CONFIG_PPC_MM_SLICES +unsigned int get_paca_psize(unsigned long addr) +{ + unsigned long index, slices; + + if (addr < SLICE_LOW_TOP) { + slices = get_paca()->context.low_slices_psize; + index = GET_LOW_SLICE_INDEX(addr); + } else { + slices = get_paca()->context.high_slices_psize; + index = GET_HIGH_SLICE_INDEX(addr); + } + return (slices >> (index * 4)) & 0xF; +} + +#else +unsigned int get_paca_psize(unsigned long addr) +{ + return get_paca()->context.user_psize; +} +#endif + /* * Demote a segment to using 4k pages. * For now this makes the whole process use 4k pages. @@ -702,13 +724,13 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap) #ifdef CONFIG_PPC_64K_PAGES void demote_segment_4k(struct mm_struct *mm, unsigned long addr) { - if (mm->context.user_psize == MMU_PAGE_4K) + if (get_slice_psize(mm, addr) == MMU_PAGE_4K) return; - slice_set_user_psize(mm, MMU_PAGE_4K); + slice_set_range_psize(mm, addr, 1, MMU_PAGE_4K); #ifdef CONFIG_SPU_BASE spu_flush_all_slbs(mm); #endif - if (get_paca()->context.user_psize != MMU_PAGE_4K) { + if (get_paca_psize(addr) != MMU_PAGE_4K) { get_paca()->context = mm->context; slb_flush_and_rebolt(); } @@ -792,11 +814,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) DBG_LOW(" user region with no mm !\n"); return 1; } -#ifdef CONFIG_PPC_MM_SLICES psize = get_slice_psize(mm, ea); -#else - psize = mm->context.user_psize; -#endif ssize = user_segment_size(ea); vsid = get_vsid(mm->context.id, ea, ssize); break; @@ -868,7 +886,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) /* Do actual hashing */ #ifdef CONFIG_PPC_64K_PAGES /* If _PAGE_4K_PFN is set, make sure this is a 4k segment */ - if (pte_val(*ptep) & _PAGE_4K_PFN) { + if ((pte_val(*ptep) & _PAGE_4K_PFN) && psize == MMU_PAGE_64K) { demote_segment_4k(mm, ea); psize = MMU_PAGE_4K; } @@ -897,7 +915,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) } } if (user_region) { - if (psize != get_paca()->context.user_psize) { + if (psize != get_paca_psize(ea)) { get_paca()->context = mm->context; slb_flush_and_rebolt(); } diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c index ad928edafb0a..583be67ad938 100644 --- a/arch/powerpc/mm/slice.c +++ b/arch/powerpc/mm/slice.c @@ -215,10 +215,7 @@ static void slice_convert(struct mm_struct *mm, struct slice_mask mask, int psiz mm->context.high_slices_psize); spin_unlock_irqrestore(&slice_convert_lock, flags); - mb(); - /* XXX this is sub-optimal but will do for now */ - on_each_cpu(slice_flush_segments, mm, 0, 1); #ifdef CONFIG_SPU_BASE spu_flush_all_slbs(mm); #endif @@ -384,17 +381,34 @@ static unsigned long slice_find_area(struct mm_struct *mm, unsigned long len, return slice_find_area_bottomup(mm, len, mask, psize, use_cache); } +#define or_mask(dst, src) do { \ + (dst).low_slices |= (src).low_slices; \ + (dst).high_slices |= (src).high_slices; \ +} while (0) + +#define andnot_mask(dst, src) do { \ + (dst).low_slices &= ~(src).low_slices; \ + (dst).high_slices &= ~(src).high_slices; \ +} while (0) + +#ifdef CONFIG_PPC_64K_PAGES +#define MMU_PAGE_BASE MMU_PAGE_64K +#else +#define MMU_PAGE_BASE MMU_PAGE_4K +#endif + unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len, unsigned long flags, unsigned int psize, int topdown, int use_cache) { - struct slice_mask mask; + struct slice_mask mask = {0, 0}; struct slice_mask good_mask; struct slice_mask potential_mask = {0,0} /* silence stupid warning */; - int pmask_set = 0; + struct slice_mask compat_mask = {0, 0}; int fixed = (flags & MAP_FIXED); int pshift = max_t(int, mmu_psize_defs[psize].shift, PAGE_SHIFT); struct mm_struct *mm = current->mm; + unsigned long newaddr; /* Sanity checks */ BUG_ON(mm->task_size == 0); @@ -416,21 +430,48 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len, if (!fixed && addr) { addr = _ALIGN_UP(addr, 1ul << pshift); slice_dbg(" aligned addr=%lx\n", addr); + /* Ignore hint if it's too large or overlaps a VMA */ + if (addr > mm->task_size - len || + !slice_area_is_free(mm, addr, len)) + addr = 0; } - /* First makeup a "good" mask of slices that have the right size + /* First make up a "good" mask of slices that have the right size * already */ good_mask = slice_mask_for_size(mm, psize); slice_print_mask(" good_mask", good_mask); - /* First check hint if it's valid or if we have MAP_FIXED */ - if ((addr != 0 || fixed) && (mm->task_size - len) >= addr) { + /* + * Here "good" means slices that are already the right page size, + * "compat" means slices that have a compatible page size (i.e. + * 4k in a 64k pagesize kernel), and "free" means slices without + * any VMAs. + * + * If MAP_FIXED: + * check if fits in good | compat => OK + * check if fits in good | compat | free => convert free + * else bad + * If have hint: + * check if hint fits in good => OK + * check if hint fits in good | free => convert free + * Otherwise: + * search in good, found => OK + * search in good | free, found => convert free + * search in good | compat | free, found => convert free. + */ - /* Don't bother with hint if it overlaps a VMA */ - if (!fixed && !slice_area_is_free(mm, addr, len)) - goto search; +#ifdef CONFIG_PPC_64K_PAGES + /* If we support combo pages, we can allow 64k pages in 4k slices */ + if (psize == MMU_PAGE_64K) { + compat_mask = slice_mask_for_size(mm, MMU_PAGE_4K); + if (fixed) + or_mask(good_mask, compat_mask); + } +#endif + /* First check hint if it's valid or if we have MAP_FIXED */ + if (addr != 0 || fixed) { /* Build a mask for the requested range */ mask = slice_range_to_mask(addr, len); slice_print_mask(" mask", mask); @@ -442,54 +483,66 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len, slice_dbg(" fits good !\n"); return addr; } - - /* We don't fit in the good mask, check what other slices are - * empty and thus can be converted + } else { + /* Now let's see if we can find something in the existing + * slices for that size */ - potential_mask = slice_mask_for_free(mm); - potential_mask.low_slices |= good_mask.low_slices; - potential_mask.high_slices |= good_mask.high_slices; - pmask_set = 1; - slice_print_mask(" potential", potential_mask); - if (slice_check_fit(mask, potential_mask)) { - slice_dbg(" fits potential !\n"); - goto convert; + newaddr = slice_find_area(mm, len, good_mask, psize, topdown, + use_cache); + if (newaddr != -ENOMEM) { + /* Found within the good mask, we don't have to setup, + * we thus return directly + */ + slice_dbg(" found area at 0x%lx\n", newaddr); + return newaddr; } } - /* If we have MAP_FIXED and failed the above step, then error out */ + /* We don't fit in the good mask, check what other slices are + * empty and thus can be converted + */ + potential_mask = slice_mask_for_free(mm); + or_mask(potential_mask, good_mask); + slice_print_mask(" potential", potential_mask); + + if ((addr != 0 || fixed) && slice_check_fit(mask, potential_mask)) { + slice_dbg(" fits potential !\n"); + goto convert; + } + + /* If we have MAP_FIXED and failed the above steps, then error out */ if (fixed) return -EBUSY; - search: slice_dbg(" search...\n"); - /* Now let's see if we can find something in the existing slices - * for that size + /* If we had a hint that didn't work out, see if we can fit + * anywhere in the good area. */ - addr = slice_find_area(mm, len, good_mask, psize, topdown, use_cache); - if (addr != -ENOMEM) { - /* Found within the good mask, we don't have to setup, - * we thus return directly - */ - slice_dbg(" found area at 0x%lx\n", addr); - return addr; - } - - /* Won't fit, check what can be converted */ - if (!pmask_set) { - potential_mask = slice_mask_for_free(mm); - potential_mask.low_slices |= good_mask.low_slices; - potential_mask.high_slices |= good_mask.high_slices; - pmask_set = 1; - slice_print_mask(" potential", potential_mask); + if (addr) { + addr = slice_find_area(mm, len, good_mask, psize, topdown, + use_cache); + if (addr != -ENOMEM) { + slice_dbg(" found area at 0x%lx\n", addr); + return addr; + } } /* Now let's see if we can find something in the existing slices - * for that size + * for that size plus free slices */ addr = slice_find_area(mm, len, potential_mask, psize, topdown, use_cache); + +#ifdef CONFIG_PPC_64K_PAGES + if (addr == -ENOMEM && psize == MMU_PAGE_64K) { + /* retry the search with 4k-page slices included */ + or_mask(potential_mask, compat_mask); + addr = slice_find_area(mm, len, potential_mask, psize, + topdown, use_cache); + } +#endif + if (addr == -ENOMEM) return -ENOMEM; @@ -498,7 +551,13 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len, slice_print_mask(" mask", mask); convert: - slice_convert(mm, mask, psize); + andnot_mask(mask, good_mask); + andnot_mask(mask, compat_mask); + if (mask.low_slices || mask.high_slices) { + slice_convert(mm, mask, psize); + if (psize > MMU_PAGE_BASE) + on_each_cpu(slice_flush_segments, mm, 0, 1); + } return addr; } @@ -598,6 +657,36 @@ void slice_set_user_psize(struct mm_struct *mm, unsigned int psize) spin_unlock_irqrestore(&slice_convert_lock, flags); } +void slice_set_psize(struct mm_struct *mm, unsigned long address, + unsigned int psize) +{ + unsigned long i, flags; + u64 *p; + + spin_lock_irqsave(&slice_convert_lock, flags); + if (address < SLICE_LOW_TOP) { + i = GET_LOW_SLICE_INDEX(address); + p = &mm->context.low_slices_psize; + } else { + i = GET_HIGH_SLICE_INDEX(address); + p = &mm->context.high_slices_psize; + } + *p = (*p & ~(0xful << (i * 4))) | ((unsigned long) psize << (i * 4)); + spin_unlock_irqrestore(&slice_convert_lock, flags); + +#ifdef CONFIG_SPU_BASE + spu_flush_all_slbs(mm); +#endif +} + +void slice_set_range_psize(struct mm_struct *mm, unsigned long start, + unsigned long len, unsigned int psize) +{ + struct slice_mask mask = slice_range_to_mask(start, len); + + slice_convert(mm, mask, psize); +} + /* * is_hugepage_only_range() is used by generic code to verify wether * a normal mmap mapping (non hugetlbfs) is valid on a given area. diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 1a1ccfbb9232..c66b8ed7e7d9 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -187,7 +187,7 @@ config PPC_STD_MMU_32 config PPC_MM_SLICES bool - default y if HUGETLB_PAGE + default y if HUGETLB_PAGE || PPC_64K_PAGES default n config VIRT_CPU_ACCOUNTING diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h index 25af4fc8daf4..02fd80710e9d 100644 --- a/include/asm-powerpc/page_64.h +++ b/include/asm-powerpc/page_64.h @@ -126,16 +126,22 @@ extern unsigned int get_slice_psize(struct mm_struct *mm, extern void slice_init_context(struct mm_struct *mm, unsigned int psize); extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize); +extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start, + unsigned long len, unsigned int psize); + #define slice_mm_new_context(mm) ((mm)->context.id == 0) #endif /* __ASSEMBLY__ */ #else #define slice_init() +#define get_slice_psize(mm, addr) ((mm)->context.user_psize) #define slice_set_user_psize(mm, psize) \ do { \ (mm)->context.user_psize = (psize); \ (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \ } while (0) +#define slice_set_range_psize(mm, start, len, psize) \ + slice_set_user_psize((mm), (psize)) #define slice_mm_new_context(mm) 1 #endif /* CONFIG_PPC_MM_SLICES */ -- cgit v1.2.3 From 635f5a6354eaf2cf7d72116086175b82b12ac80a Mon Sep 17 00:00:00 2001 From: Joel Schopp Date: Thu, 19 Jun 2008 06:18:21 +1000 Subject: powerpc: Add cputable entry for Power7 architected mode Add an entry for Power7 architected mode and add "(raw)" to Power7 raw mode to distinguish it more clearly. Signed-off-by: Joel Schopp Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cputable.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index d8d669308403..f8deb3761de4 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -386,10 +386,21 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_generic, .platform = "power6", }, + { /* 2.06-compliant processor, i.e. Power7 "architected" mode */ + .pvr_mask = 0xffffffff, + .pvr_value = 0x0f000003, + .cpu_name = "POWER7 (architected)", + .cpu_features = CPU_FTRS_POWER7, + .cpu_user_features = COMMON_USER_POWER7, + .icache_bsize = 128, + .dcache_bsize = 128, + .machine_check = machine_check_generic, + .platform = "power7", + }, { /* Power7 */ .pvr_mask = 0xffff0000, .pvr_value = 0x003f0000, - .cpu_name = "POWER7", + .cpu_name = "POWER7 (raw)", .cpu_features = CPU_FTRS_POWER7, .cpu_user_features = COMMON_USER_POWER7, .icache_bsize = 128, -- cgit v1.2.3 From 0cb99013775f75a7b2cc72a26f48827601cf7cee Mon Sep 17 00:00:00 2001 From: Joel Schopp Date: Thu, 19 Jun 2008 06:23:23 +1000 Subject: powerpc: Tell firmware we support architecture V2.06 Add the bits to the architecture-vec so that ibm,client-architecture lets the firmware know we support the 2.06 architecture. Signed-off-by: Joel Schopp Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_init.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 7585ed181ff8..1ea8c8d3ce89 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -620,6 +620,7 @@ static void __init early_cmdline_parse(void) #define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */ #define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */ #define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */ +#define OV1_PPC_2_06 0x02 /* set if we support PowerPC 2.06 */ /* Option vector 2: Open Firmware options supported */ #define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */ @@ -651,6 +652,7 @@ static unsigned char ibm_architecture_vec[] = { W(0xfffe0000), W(0x003a0000), /* POWER5/POWER5+ */ W(0xffff0000), W(0x003e0000), /* POWER6 */ W(0xffff0000), W(0x003f0000), /* POWER7 */ + W(0xffffffff), W(0x0f000003), /* all 2.06-compliant */ W(0xffffffff), W(0x0f000002), /* all 2.05-compliant */ W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */ 5 - 1, /* 5 option vectors */ @@ -659,7 +661,7 @@ static unsigned char ibm_architecture_vec[] = { 3 - 2, /* length */ 0, /* don't ignore, don't halt */ OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 | - OV1_PPC_2_04 | OV1_PPC_2_05, + OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06, /* option vector 2: Open Firmware options supported */ 34 - 2, /* length */ -- cgit v1.2.3 From 87e9ab13c36b838f7d557a6111dfdd29fcde85ad Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Thu, 19 Jun 2008 08:32:56 +1000 Subject: powerpc: hash_huge_page() should get the WIMG bits from the lpte Signed-off-by: Dave Kleikamp Cc: Jon Tollefson Cc: Adam Litke Cc: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hugetlbpage.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 8fa07f3f6c2b..0d12fba31bc5 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -504,9 +504,8 @@ repeat: new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE; #endif /* Add in WIMG bits */ - /* XXX We should store these in the pte */ - /* --BenH: I think they are ... */ - rflags |= _PAGE_COHERENT; + rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE | + _PAGE_COHERENT | _PAGE_GUARDED)); /* Insert into the hash table, primary slot */ slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0, -- cgit v1.2.3 From f0c426bc3557a93e9d2f2863fda1e2042f942a60 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 21 Jun 2008 02:31:01 +1000 Subject: powerpc: Move common module code into its own file Refactor common code between ppc32 and ppc64 module handling into a shared filed. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/module.c | 110 ++++++++++++++++++++++++++++++++++++++++ arch/powerpc/kernel/module_32.c | 72 -------------------------- arch/powerpc/kernel/module_64.c | 78 ---------------------------- 4 files changed, 111 insertions(+), 151 deletions(-) create mode 100644 arch/powerpc/kernel/module.c diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 0e8f928fef70..9ebeb2406b5b 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -44,7 +44,7 @@ obj-$(CONFIG_TAU) += tau_6xx.o obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \ swsusp_$(CONFIG_WORD_SIZE).o obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o -obj-$(CONFIG_MODULES) += module_$(CONFIG_WORD_SIZE).o +obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o ifeq ($(CONFIG_PPC_MERGE),y) diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c new file mode 100644 index 000000000000..40dd52d81c18 --- /dev/null +++ b/arch/powerpc/kernel/module.c @@ -0,0 +1,110 @@ +/* Kernel module help for powerpc. + Copyright (C) 2001, 2003 Rusty Russell IBM Corporation. + Copyright (C) 2008 Freescale Semiconductor, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "setup.h" + +LIST_HEAD(module_bug_list); + +void *module_alloc(unsigned long size) +{ + if (size == 0) + return NULL; + + return vmalloc_exec(size); +} + +/* Free memory returned from module_alloc */ +void module_free(struct module *mod, void *module_region) +{ + vfree(module_region); + /* FIXME: If module_region == mod->init_region, trim exception + table entries. */ +} + +static const Elf_Shdr *find_section(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + const char *name) +{ + char *secstrings; + unsigned int i; + + secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + for (i = 1; i < hdr->e_shnum; i++) + if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0) + return &sechdrs[i]; + return NULL; +} + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, struct module *me) +{ + const Elf_Shdr *sect; + int err; + + err = module_bug_finalize(hdr, sechdrs, me); + if (err) + return err; + + /* Apply feature fixups */ + sect = find_section(hdr, sechdrs, "__ftr_fixup"); + if (sect != NULL) + do_feature_fixups(cur_cpu_spec->cpu_features, + (void *)sect->sh_addr, + (void *)sect->sh_addr + sect->sh_size); + +#ifdef CONFIG_PPC64 + sect = find_section(hdr, sechdrs, "__fw_ftr_fixup"); + if (sect != NULL) + do_feature_fixups(powerpc_firmware_features, + (void *)sect->sh_addr, + (void *)sect->sh_addr + sect->sh_size); +#endif + + return 0; +} + +void module_arch_cleanup(struct module *mod) +{ + module_bug_cleanup(mod); +} + +struct bug_entry *module_find_bug(unsigned long bugaddr) +{ + struct mod_arch_specific *mod; + unsigned int i; + struct bug_entry *bug; + + list_for_each_entry(mod, &module_bug_list, bug_list) { + bug = mod->bug_table; + for (i = 0; i < mod->num_bugs; ++i, ++bug) + if (bugaddr == bug->bug_addr) + return bug; + } + return NULL; +} diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c index eab313858315..2df91a03462a 100644 --- a/arch/powerpc/kernel/module_32.c +++ b/arch/powerpc/kernel/module_32.c @@ -34,23 +34,6 @@ #define DEBUGP(fmt , ...) #endif -LIST_HEAD(module_bug_list); - -void *module_alloc(unsigned long size) -{ - if (size == 0) - return NULL; - return vmalloc(size); -} - -/* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) -{ - vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ -} - /* Count how many different relocations (different symbol, different addend) */ static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num) @@ -325,58 +308,3 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, } return 0; } - -static const Elf_Shdr *find_section(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, - const char *name) -{ - char *secstrings; - unsigned int i; - - secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - for (i = 1; i < hdr->e_shnum; i++) - if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0) - return &sechdrs[i]; - return NULL; -} - -int module_finalize(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, - struct module *me) -{ - const Elf_Shdr *sect; - int err; - - err = module_bug_finalize(hdr, sechdrs, me); - if (err) /* never true, currently */ - return err; - - /* Apply feature fixups */ - sect = find_section(hdr, sechdrs, "__ftr_fixup"); - if (sect != NULL) - do_feature_fixups(cur_cpu_spec->cpu_features, - (void *)sect->sh_addr, - (void *)sect->sh_addr + sect->sh_size); - - return 0; -} - -void module_arch_cleanup(struct module *mod) -{ - module_bug_cleanup(mod); -} - -struct bug_entry *module_find_bug(unsigned long bugaddr) -{ - struct mod_arch_specific *mod; - unsigned int i; - struct bug_entry *bug; - - list_for_each_entry(mod, &module_bug_list, bug_list) { - bug = mod->bug_table; - for (i = 0; i < mod->num_bugs; ++i, ++bug) - if (bugaddr == bug->bug_addr) - return bug; - } - return NULL; -} diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index 3a82b02b784b..4803f2de98dd 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -101,22 +101,6 @@ static unsigned int count_relocs(const Elf64_Rela *rela, unsigned int num) return _count_relocs; } -void *module_alloc(unsigned long size) -{ - if (size == 0) - return NULL; - - return vmalloc_exec(size); -} - -/* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) -{ - vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ -} - static int relacmp(const void *_x, const void *_y) { const Elf64_Rela *x, *y; @@ -466,65 +450,3 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, return 0; } - -LIST_HEAD(module_bug_list); - -static const Elf_Shdr *find_section(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, - const char *name) -{ - char *secstrings; - unsigned int i; - - secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - for (i = 1; i < hdr->e_shnum; i++) - if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0) - return &sechdrs[i]; - return NULL; -} - -int module_finalize(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, struct module *me) -{ - const Elf_Shdr *sect; - int err; - - err = module_bug_finalize(hdr, sechdrs, me); - if (err) - return err; - - /* Apply feature fixups */ - sect = find_section(hdr, sechdrs, "__ftr_fixup"); - if (sect != NULL) - do_feature_fixups(cur_cpu_spec->cpu_features, - (void *)sect->sh_addr, - (void *)sect->sh_addr + sect->sh_size); - - sect = find_section(hdr, sechdrs, "__fw_ftr_fixup"); - if (sect != NULL) - do_feature_fixups(powerpc_firmware_features, - (void *)sect->sh_addr, - (void *)sect->sh_addr + sect->sh_size); - - return 0; -} - -void module_arch_cleanup(struct module *mod) -{ - module_bug_cleanup(mod); -} - -struct bug_entry *module_find_bug(unsigned long bugaddr) -{ - struct mod_arch_specific *mod; - unsigned int i; - struct bug_entry *bug; - - list_for_each_entry(mod, &module_bug_list, bug_list) { - bug = mod->bug_table; - for (i = 0; i < mod->num_bugs; ++i, ++bug) - if (bugaddr == bug->bug_addr) - return bug; - } - return NULL; -} -- cgit v1.2.3 From 9b4a8dd2e9f8af206eb39e3d99c442b0d6158953 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 24 Jun 2008 03:46:57 +1000 Subject: drivers/macintosh: Various cleanups This contains the following cleanups: - make the following needlessly global code static: - adb.c: adb_controller - adb.c: adb_init() - adbhid.c: adb_to_linux_keycodes[] (also make it const) - via-pmu68k.c: backlight_level - via-pmu68k.c: backlight_enabled - remove the following unused code: - via-pmu68k.c: sleep_notifier_list Signed-off-by: Adrian Bunk Acked-by: Geert Uytterhoeven Acked-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- drivers/macintosh/adb.c | 5 ++--- drivers/macintosh/adbhid.c | 2 +- drivers/macintosh/via-pmu68k.c | 5 ++--- include/linux/adb.h | 1 - 4 files changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c index dbaad39020a1..61b62a6f681b 100644 --- a/drivers/macintosh/adb.c +++ b/drivers/macintosh/adb.c @@ -46,7 +46,6 @@ #endif -EXPORT_SYMBOL(adb_controller); EXPORT_SYMBOL(adb_client_list); extern struct adb_driver via_macii_driver; @@ -80,7 +79,7 @@ static struct adb_driver *adb_driver_list[] = { static struct class *adb_dev_class; -struct adb_driver *adb_controller; +static struct adb_driver *adb_controller; BLOCKING_NOTIFIER_HEAD(adb_client_list); static int adb_got_sleep; static int adb_inited; @@ -290,7 +289,7 @@ static int adb_resume(struct platform_device *dev) } #endif /* CONFIG_PM */ -int __init adb_init(void) +static int __init adb_init(void) { struct adb_driver *driver; int i; diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c index ef4c117ea35f..59ea520a5d7a 100644 --- a/drivers/macintosh/adbhid.c +++ b/drivers/macintosh/adbhid.c @@ -75,7 +75,7 @@ static struct notifier_block adbhid_adb_notifier = { #define ADB_KEY_POWER_OLD 0x7e #define ADB_KEY_POWER 0x7f -u16 adb_to_linux_keycodes[128] = { +static const u16 adb_to_linux_keycodes[128] = { /* 0x00 */ KEY_A, /* 30 */ /* 0x01 */ KEY_S, /* 31 */ /* 0x02 */ KEY_D, /* 32 */ diff --git a/drivers/macintosh/via-pmu68k.c b/drivers/macintosh/via-pmu68k.c index e2f84da09e7c..b64741c95ac4 100644 --- a/drivers/macintosh/via-pmu68k.c +++ b/drivers/macintosh/via-pmu68k.c @@ -101,7 +101,6 @@ static int pmu_kind = PMU_UNKNOWN; static int pmu_fully_inited; int asleep; -BLOCKING_NOTIFIER_HEAD(sleep_notifier_list); static int pmu_probe(void); static int pmu_init(void); @@ -741,8 +740,8 @@ pmu_handle_data(unsigned char *data, int len) } } -int backlight_level = -1; -int backlight_enabled = 0; +static int backlight_level = -1; +static int backlight_enabled = 0; #define LEVEL_TO_BRIGHT(lev) ((lev) < 1? 0x7f: 0x4a - ((lev) << 1)) diff --git a/include/linux/adb.h b/include/linux/adb.h index 64d8878e1444..63bca502fa55 100644 --- a/include/linux/adb.h +++ b/include/linux/adb.h @@ -84,7 +84,6 @@ enum adb_message { ADB_MSG_PRE_RESET, /* Called before resetting the bus */ ADB_MSG_POST_RESET /* Called after resetting the bus (re-do init & register) */ }; -extern struct adb_driver *adb_controller; extern struct blocking_notifier_head adb_client_list; int adb_request(struct adb_request *req, void (*done)(struct adb_request *), -- cgit v1.2.3 From d1cdcf2241723d6596d56abb8777b5ef79b4a878 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 24 Jun 2008 03:48:21 +1000 Subject: powerpc: Don't export asm/asm-compat.h to userspace asm/asm-compat.h doesn't seem to be intended for userspace usage. Signed-off-by: Adrian Bunk Signed-off-by: Paul Mackerras --- include/asm-powerpc/Kbuild | 1 - include/asm-powerpc/cputable.h | 5 +++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild index bca352e033c3..34a0a8db0104 100644 --- a/include/asm-powerpc/Kbuild +++ b/include/asm-powerpc/Kbuild @@ -23,7 +23,6 @@ header-y += sigcontext.h header-y += statfs.h header-y += ps3fb.h -unifdef-y += asm-compat.h unifdef-y += bootx.h unifdef-y += byteorder.h unifdef-y += cputable.h diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 3e5b2deafe44..3189ac5d0a69 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -1,8 +1,6 @@ #ifndef __ASM_POWERPC_CPUTABLE_H #define __ASM_POWERPC_CPUTABLE_H -#include - #define PPC_FEATURE_32 0x80000000 #define PPC_FEATURE_64 0x40000000 #define PPC_FEATURE_601_INSTR 0x20000000 @@ -32,6 +30,9 @@ #define PPC_FEATURE_PPC_LE 0x00000001 #ifdef __KERNEL__ + +#include + #ifndef __ASSEMBLY__ /* This structure can grow, it's real size is used by head.S code -- cgit v1.2.3 From 178f8d78fdeaace8b22a759a059b74f39caf23a4 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 24 Jun 2008 03:48:28 +1000 Subject: powerpc: asm/elf.h: Reduce userspace header This makes asm/elf.h export less non-userspace stuff to userspace. Signed-off-by: Adrian Bunk Signed-off-by: Paul Mackerras --- include/asm-powerpc/elf.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h index 9080d85cb9d0..d1e3bda0625d 100644 --- a/include/asm-powerpc/elf.h +++ b/include/asm-powerpc/elf.h @@ -224,8 +224,6 @@ extern int dump_task_altivec(struct task_struct *, elf_vrregset_t *vrregs); #define ELF_CORE_XFPREG_TYPE NT_PPC_VMX #endif -#endif /* __KERNEL__ */ - /* ELF_HWCAP yields a mask that user programs can use to figure out what instruction set this cpu supports. This could be done in userspace, but it's not easy, and we've already done it here. */ @@ -243,8 +241,6 @@ extern int dump_task_altivec(struct task_struct *, elf_vrregset_t *vrregs); } while (0) #endif /* __powerpc64__ */ -#ifdef __KERNEL__ - #ifdef __powerpc64__ # define SET_PERSONALITY(ex, ibcs2) \ do { \ @@ -272,8 +268,6 @@ do { \ # define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) #endif /* __powerpc64__ */ -#endif /* __KERNEL__ */ - extern int dcache_bsize; extern int icache_bsize; extern int ucache_bsize; @@ -285,6 +279,8 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack); #define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b); +#endif /* __KERNEL__ */ + /* * The requirements here are: * - keep the final alignment of sp (sp & 0xf) @@ -422,6 +418,8 @@ do { \ /* Keep this the last entry. */ #define R_PPC64_NUM 107 +#ifdef __KERNEL__ + #ifdef CONFIG_SPU_BASE /* Notes used in ET_CORE. Note name is "SPU//". */ #define NT_SPU 1 @@ -430,4 +428,6 @@ do { \ #endif /* CONFIG_SPU_BASE */ +#endif /* __KERNEL */ + #endif /* _ASM_POWERPC_ELF_H */ -- cgit v1.2.3 From 73f38fe1b563a9d23ffacbda7b51decf41b0c49c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 24 Jun 2008 04:14:52 +1000 Subject: drivers/macintosh/smu.c: Improve error handling This makes two changes: * As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b, alloc_bootmem never returns NULL and always returns a zeroed region of memory. Thus the error checking code and memset after the call to alloc_bootmem are not necessary. * The old error handling code consisted of setting a global variable to NULL and returning an error code, which could cause previously allocated resources never to be freed. The patch adds calls to appropriate resource deallocation functions. Signed-off-by: Julia Lawall Signed-off-by: Paul Mackerras --- drivers/macintosh/smu.c | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-) diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index 1272184a3a6f..76dbf25cb70f 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -474,6 +474,7 @@ int __init smu_init (void) { struct device_node *np; const u32 *data; + int ret = 0; np = of_find_node_by_type(NULL, "smu"); if (np == NULL) @@ -483,16 +484,11 @@ int __init smu_init (void) if (smu_cmdbuf_abs == 0) { printk(KERN_ERR "SMU: Command buffer not allocated !\n"); - of_node_put(np); - return -EINVAL; + ret = -EINVAL; + goto fail_np; } smu = alloc_bootmem(sizeof(struct smu_device)); - if (smu == NULL) { - of_node_put(np); - return -ENOMEM; - } - memset(smu, 0, sizeof(*smu)); spin_lock_init(&smu->lock); INIT_LIST_HEAD(&smu->cmd_list); @@ -510,14 +506,14 @@ int __init smu_init (void) smu->db_node = of_find_node_by_name(NULL, "smu-doorbell"); if (smu->db_node == NULL) { printk(KERN_ERR "SMU: Can't find doorbell GPIO !\n"); - goto fail; + ret = -ENXIO; + goto fail_bootmem; } data = of_get_property(smu->db_node, "reg", NULL); if (data == NULL) { - of_node_put(smu->db_node); - smu->db_node = NULL; printk(KERN_ERR "SMU: Can't find doorbell GPIO address !\n"); - goto fail; + ret = -ENXIO; + goto fail_db_node; } /* Current setup has one doorbell GPIO that does both doorbell @@ -551,7 +547,8 @@ int __init smu_init (void) smu->db_buf = ioremap(0x8000860c, 0x1000); if (smu->db_buf == NULL) { printk(KERN_ERR "SMU: Can't map doorbell buffer pointer !\n"); - goto fail; + ret = -ENXIO; + goto fail_msg_node; } /* U3 has an issue with NAP mode when issuing SMU commands */ @@ -562,10 +559,17 @@ int __init smu_init (void) sys_ctrler = SYS_CTRLER_SMU; return 0; - fail: +fail_msg_node: + if (smu->msg_node) + of_node_put(smu->msg_node); +fail_db_node: + of_node_put(smu->db_node); +fail_bootmem: + free_bootmem((unsigned long)smu, sizeof(struct smu_device)); smu = NULL; - return -ENXIO; - +fail_np: + of_node_put(np); + return ret; } -- cgit v1.2.3 From aaddd3eacaeaef3503035750b3f21ac2bfe97cbf Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:32:21 +1000 Subject: powerpc: Move code patching code into arch/powerpc/lib/code-patching.c We currently have a few routines for patching code in asm/system.h, because they didn't fit anywhere else. I'd like to clean them up a little and add some more, so first move them into a dedicated C file - they don't need to be inlined. While we're moving the code, drop create_function_call(), it's intended caller never got merged and will be replaced in future with something different. Signed-off-by: Michael Ellerman Acked-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/crash_dump.c | 1 + arch/powerpc/lib/Makefile | 2 ++ arch/powerpc/lib/code-patching.c | 33 +++++++++++++++++++++ arch/powerpc/platforms/86xx/mpc86xx_smp.c | 1 + arch/powerpc/platforms/powermac/smp.c | 1 + include/asm-powerpc/code-patching.h | 25 ++++++++++++++++ include/asm-powerpc/system.h | 48 ------------------------------- 7 files changed, 63 insertions(+), 48 deletions(-) create mode 100644 arch/powerpc/lib/code-patching.c create mode 100644 include/asm-powerpc/code-patching.h diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 9ee3c5278db0..35b9a668b0e1 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index e522b06cc42f..e7f7042b9f61 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -24,3 +24,5 @@ obj-$(CONFIG_SMP) += locks.o endif obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o + +obj-y += code-patching.o diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c new file mode 100644 index 000000000000..7afae88ed1d4 --- /dev/null +++ b/arch/powerpc/lib/code-patching.c @@ -0,0 +1,33 @@ +/* + * Copyright 2008 Michael Ellerman, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include + + +void create_instruction(unsigned long addr, unsigned int instr) +{ + unsigned int *p; + p = (unsigned int *)addr; + *p = instr; + asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (p)); +} + +void create_branch(unsigned long addr, unsigned long target, int flags) +{ + unsigned int instruction; + + if (! (flags & BRANCH_ABSOLUTE)) + target = target - addr; + + /* Mask out the flags and target, so they don't step on each other. */ + instruction = 0x48000000 | (flags & 0x3) | (target & 0x03FFFFFC); + + create_instruction(addr, instruction); +} diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c index ba55b0ff0f74..63f55853cd69 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c @@ -15,6 +15,7 @@ #include #include +#include #include #include #include diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index cb2d894541c6..bf202f7eadf8 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -36,6 +36,7 @@ #include #include +#include #include #include #include diff --git a/include/asm-powerpc/code-patching.h b/include/asm-powerpc/code-patching.h new file mode 100644 index 000000000000..0b91fdf944db --- /dev/null +++ b/include/asm-powerpc/code-patching.h @@ -0,0 +1,25 @@ +#ifndef _ASM_POWERPC_CODE_PATCHING_H +#define _ASM_POWERPC_CODE_PATCHING_H + +/* + * Copyright 2008, Michael Ellerman, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* Flags for create_branch: + * "b" == create_branch(addr, target, 0); + * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE); + * "bl" == create_branch(addr, target, BRANCH_SET_LINK); + * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK); + */ +#define BRANCH_SET_LINK 0x1 +#define BRANCH_ABSOLUTE 0x2 + +extern void create_branch(unsigned long addr, unsigned long target, int flags); +extern void create_instruction(unsigned long addr, unsigned int instr); + +#endif /* _ASM_POWERPC_CODE_PATCHING_H */ diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 145b70f6d22b..2642a92b724f 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -526,54 +526,6 @@ extern void reloc_got2(unsigned long); #define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x))) -static inline void create_instruction(unsigned long addr, unsigned int instr) -{ - unsigned int *p; - p = (unsigned int *)addr; - *p = instr; - asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (p)); -} - -/* Flags for create_branch: - * "b" == create_branch(addr, target, 0); - * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE); - * "bl" == create_branch(addr, target, BRANCH_SET_LINK); - * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK); - */ -#define BRANCH_SET_LINK 0x1 -#define BRANCH_ABSOLUTE 0x2 - -static inline void create_branch(unsigned long addr, - unsigned long target, int flags) -{ - unsigned int instruction; - - if (! (flags & BRANCH_ABSOLUTE)) - target = target - addr; - - /* Mask out the flags and target, so they don't step on each other. */ - instruction = 0x48000000 | (flags & 0x3) | (target & 0x03FFFFFC); - - create_instruction(addr, instruction); -} - -static inline void create_function_call(unsigned long addr, void * func) -{ - unsigned long func_addr; - -#ifdef CONFIG_PPC64 - /* - * On PPC64 the function pointer actually points to the function's - * descriptor. The first entry in the descriptor is the address - * of the function text. - */ - func_addr = *(unsigned long *)func; -#else - func_addr = (unsigned long)func; -#endif - create_branch(addr, func_addr, BRANCH_SET_LINK); -} - #ifdef CONFIG_VIRT_CPU_ACCOUNTING extern void account_system_vtime(struct task_struct *); #endif -- cgit v1.2.3 From e7a57273c6407bb6903fbaddec8c2119bf318617 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:32:22 +1000 Subject: powerpc: Allow create_branch() to return errors Currently create_branch() creates a branch instruction for you, and patches it into the call site. In some circumstances it would be nice to be able to create the instruction and patch it later, and also some code might want to check for errors in the branch creation before doing the patching. A future commit will change create_branch() to check for errors. For callers that don't care, replace create_branch() with patch_branch(), which just creates the branch and patches it directly. While we're touching all the callers, change to using unsigned int *, as this seems to match usage better. That allows (and requires) us to remove the volatile in the definition of vector in powermac/smp.c and mpc86xx_smp.c, that's correct because now that we're passing vector as an unsigned int * the compiler knows that it's value might change across the patch_branch() call. Signed-off-by: Michael Ellerman Acked-by: Kumar Gala Acked-by: Jon Loeliger Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/crash_dump.c | 6 ++++-- arch/powerpc/lib/code-patching.c | 20 ++++++++++++-------- arch/powerpc/platforms/86xx/mpc86xx_smp.c | 5 ++--- arch/powerpc/platforms/powermac/smp.c | 5 ++--- include/asm-powerpc/code-patching.h | 6 ++++-- 5 files changed, 24 insertions(+), 18 deletions(-) diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 35b9a668b0e1..26648544d5e4 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -34,6 +34,8 @@ void __init reserve_kdump_trampoline(void) static void __init create_trampoline(unsigned long addr) { + unsigned int *p = (unsigned int *)addr; + /* The maximum range of a single instruction branch, is the current * instruction's address + (32 MB - 4) bytes. For the trampoline we * need to branch to current address + 32 MB. So we insert a nop at @@ -42,8 +44,8 @@ static void __init create_trampoline(unsigned long addr) * branch to "addr" we jump to ("addr" + 32 MB). Although it requires * two instructions it doesn't require any registers. */ - create_instruction(addr, 0x60000000); /* nop */ - create_branch(addr + 4, addr + PHYSICAL_START, 0); + patch_instruction(p, 0x60000000); /* nop */ + patch_branch(++p, addr + PHYSICAL_START, 0); } void __init setup_kdump_trampoline(void) diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c index 7afae88ed1d4..638dde313cbc 100644 --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -11,23 +11,27 @@ #include -void create_instruction(unsigned long addr, unsigned int instr) +void patch_instruction(unsigned int *addr, unsigned int instr) { - unsigned int *p; - p = (unsigned int *)addr; - *p = instr; - asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (p)); + *addr = instr; + asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (addr)); } -void create_branch(unsigned long addr, unsigned long target, int flags) +void patch_branch(unsigned int *addr, unsigned long target, int flags) +{ + patch_instruction(addr, create_branch(addr, target, flags)); +} + +unsigned int create_branch(const unsigned int *addr, + unsigned long target, int flags) { unsigned int instruction; if (! (flags & BRANCH_ABSOLUTE)) - target = target - addr; + target = target - (unsigned long)addr; /* Mask out the flags and target, so they don't step on each other. */ instruction = 0x48000000 | (flags & 0x3) | (target & 0x03FFFFFC); - create_instruction(addr, instruction); + return instruction; } diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c index 63f55853cd69..835f2dc24dc9 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c @@ -57,8 +57,7 @@ smp_86xx_kick_cpu(int nr) unsigned int save_vector; unsigned long target, flags; int n = 0; - volatile unsigned int *vector - = (volatile unsigned int *)(KERNELBASE + 0x100); + unsigned int *vector = (unsigned int *)(KERNELBASE + 0x100); if (nr < 0 || nr >= NR_CPUS) return; @@ -72,7 +71,7 @@ smp_86xx_kick_cpu(int nr) /* Setup fake reset vector to call __secondary_start_mpc86xx. */ target = (unsigned long) __secondary_start_mpc86xx; - create_branch((unsigned long)vector, target, BRANCH_SET_LINK); + patch_branch(vector, target, BRANCH_SET_LINK); /* Kick that CPU */ smp_86xx_release_core(nr); diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index bf202f7eadf8..4ae3d00e0bdd 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -787,8 +787,7 @@ static void __devinit smp_core99_kick_cpu(int nr) { unsigned int save_vector; unsigned long target, flags; - volatile unsigned int *vector - = ((volatile unsigned int *)(KERNELBASE+0x100)); + unsigned int *vector = (unsigned int *)(KERNELBASE+0x100); if (nr < 0 || nr > 3) return; @@ -805,7 +804,7 @@ static void __devinit smp_core99_kick_cpu(int nr) * b __secondary_start_pmac_0 + nr*8 - KERNELBASE */ target = (unsigned long) __secondary_start_pmac_0 + nr * 8; - create_branch((unsigned long)vector, target, BRANCH_SET_LINK); + patch_branch(vector, target, BRANCH_SET_LINK); /* Put some life in our friend */ pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0); diff --git a/include/asm-powerpc/code-patching.h b/include/asm-powerpc/code-patching.h index 0b91fdf944db..fdb187cbc40d 100644 --- a/include/asm-powerpc/code-patching.h +++ b/include/asm-powerpc/code-patching.h @@ -19,7 +19,9 @@ #define BRANCH_SET_LINK 0x1 #define BRANCH_ABSOLUTE 0x2 -extern void create_branch(unsigned long addr, unsigned long target, int flags); -extern void create_instruction(unsigned long addr, unsigned int instr); +unsigned int create_branch(const unsigned int *addr, + unsigned long target, int flags); +void patch_branch(unsigned int *addr, unsigned long target, int flags); +void patch_instruction(unsigned int *addr, unsigned int instr); #endif /* _ASM_POWERPC_CODE_PATCHING_H */ -- cgit v1.2.3 From 053a858efa46c9ab86363b271374ec02ad2af753 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:32:24 +1000 Subject: powerpc: Make create_branch() return errors if the branch target is too large If you pass a target value to create_branch() which is more than 32MB - 4, or - 32MB away from the branch site, then it's impossible to create an immediate branch. The current code doesn't check, which will lead to us creating a branch to somewhere else - which is bad. For code that cares to check we return 0, which is easy to check for, and for code that doesn't at least we'll be creating an illegal instruction, rather than a branch to some random address. Signed-off-by: Michael Ellerman Acked-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/lib/code-patching.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c index 638dde313cbc..430f4c15d786 100644 --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -26,12 +26,18 @@ unsigned int create_branch(const unsigned int *addr, unsigned long target, int flags) { unsigned int instruction; + long offset; + offset = target; if (! (flags & BRANCH_ABSOLUTE)) - target = target - (unsigned long)addr; + offset = offset - (unsigned long)addr; + + /* Check we can represent the target in the instruction format */ + if (offset < -0x2000000 || offset > 0x1fffffc || offset & 0x3) + return 0; /* Mask out the flags and target, so they don't step on each other. */ - instruction = 0x48000000 | (flags & 0x3) | (target & 0x03FFFFFC); + instruction = 0x48000000 | (flags & 0x3) | (offset & 0x03FFFFFC); return instruction; } -- cgit v1.2.3 From 07630a37beefe8e4401c602f04e3e5bcbba50b31 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:32:28 +1000 Subject: powerpc: Add ppc_function_entry() which gets the entry point for a function Because function pointers point to different things on 32-bit vs 64-bit, add a macro that deals with dereferencing the OPD on 64-bit. The soon to be merged ftrace wants this, as well as other code I am working on. Signed-off-by: Michael Ellerman Acked-by: Kumar Gala Signed-off-by: Paul Mackerras --- include/asm-powerpc/code-patching.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/include/asm-powerpc/code-patching.h b/include/asm-powerpc/code-patching.h index fdb187cbc40d..a45a7ff78725 100644 --- a/include/asm-powerpc/code-patching.h +++ b/include/asm-powerpc/code-patching.h @@ -10,6 +10,8 @@ * 2 of the License, or (at your option) any later version. */ +#include + /* Flags for create_branch: * "b" == create_branch(addr, target, 0); * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE); @@ -24,4 +26,18 @@ unsigned int create_branch(const unsigned int *addr, void patch_branch(unsigned int *addr, unsigned long target, int flags); void patch_instruction(unsigned int *addr, unsigned int instr); +static inline unsigned long ppc_function_entry(void *func) +{ +#ifdef CONFIG_PPC64 + /* + * On PPC64 the function pointer actually points to the function's + * descriptor. The first entry in the descriptor is the address + * of the function text. + */ + return ((func_descr_t *)func)->entry; +#else + return (unsigned long)func; +#endif +} + #endif /* _ASM_POWERPC_CODE_PATCHING_H */ -- cgit v1.2.3 From 411781a290b0d0a31fd73826b3ee110f1e3cc3b6 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:32:29 +1000 Subject: powerpc: Add new code patching routines This commit adds some new routines for patching code, which will be used in a following commit. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/lib/code-patching.c | 107 ++++++++++++++++++++++++++++++++++++ include/asm-powerpc/code-patching.h | 8 +++ 2 files changed, 115 insertions(+) diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c index 430f4c15d786..27957c4ea9e0 100644 --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -41,3 +41,110 @@ unsigned int create_branch(const unsigned int *addr, return instruction; } + +unsigned int create_cond_branch(const unsigned int *addr, + unsigned long target, int flags) +{ + unsigned int instruction; + long offset; + + offset = target; + if (! (flags & BRANCH_ABSOLUTE)) + offset = offset - (unsigned long)addr; + + /* Check we can represent the target in the instruction format */ + if (offset < -0x8000 || offset > 0x7FFF || offset & 0x3) + return 0; + + /* Mask out the flags and target, so they don't step on each other. */ + instruction = 0x40000000 | (flags & 0x3FF0003) | (offset & 0xFFFC); + + return instruction; +} + +static unsigned int branch_opcode(unsigned int instr) +{ + return (instr >> 26) & 0x3F; +} + +static int instr_is_branch_iform(unsigned int instr) +{ + return branch_opcode(instr) == 18; +} + +static int instr_is_branch_bform(unsigned int instr) +{ + return branch_opcode(instr) == 16; +} + +int instr_is_relative_branch(unsigned int instr) +{ + if (instr & BRANCH_ABSOLUTE) + return 0; + + return instr_is_branch_iform(instr) || instr_is_branch_bform(instr); +} + +static unsigned long branch_iform_target(const unsigned int *instr) +{ + signed long imm; + + imm = *instr & 0x3FFFFFC; + + /* If the top bit of the immediate value is set this is negative */ + if (imm & 0x2000000) + imm -= 0x4000000; + + if ((*instr & BRANCH_ABSOLUTE) == 0) + imm += (unsigned long)instr; + + return (unsigned long)imm; +} + +static unsigned long branch_bform_target(const unsigned int *instr) +{ + signed long imm; + + imm = *instr & 0xFFFC; + + /* If the top bit of the immediate value is set this is negative */ + if (imm & 0x8000) + imm -= 0x10000; + + if ((*instr & BRANCH_ABSOLUTE) == 0) + imm += (unsigned long)instr; + + return (unsigned long)imm; +} + +unsigned long branch_target(const unsigned int *instr) +{ + if (instr_is_branch_iform(*instr)) + return branch_iform_target(instr); + else if (instr_is_branch_bform(*instr)) + return branch_bform_target(instr); + + return 0; +} + +int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr) +{ + if (instr_is_branch_iform(*instr) || instr_is_branch_bform(*instr)) + return branch_target(instr) == addr; + + return 0; +} + +unsigned int translate_branch(const unsigned int *dest, const unsigned int *src) +{ + unsigned long target; + + target = branch_target(src); + + if (instr_is_branch_iform(*src)) + return create_branch(dest, target, *src); + else if (instr_is_branch_bform(*src)) + return create_cond_branch(dest, target, *src); + + return 0; +} diff --git a/include/asm-powerpc/code-patching.h b/include/asm-powerpc/code-patching.h index a45a7ff78725..40ad46b1dd9d 100644 --- a/include/asm-powerpc/code-patching.h +++ b/include/asm-powerpc/code-patching.h @@ -23,9 +23,17 @@ unsigned int create_branch(const unsigned int *addr, unsigned long target, int flags); +unsigned int create_cond_branch(const unsigned int *addr, + unsigned long target, int flags); void patch_branch(unsigned int *addr, unsigned long target, int flags); void patch_instruction(unsigned int *addr, unsigned int instr); +int instr_is_relative_branch(unsigned int instr); +int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr); +unsigned long branch_target(const unsigned int *instr); +unsigned int translate_branch(const unsigned int *dest, + const unsigned int *src); + static inline unsigned long ppc_function_entry(void *func) { #ifdef CONFIG_PPC64 -- cgit v1.2.3 From ae0dc73625f9b0e636ccd130e394c9b654a062fb Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:32:32 +1000 Subject: powerpc: Add tests of the code patching routines Add tests of the existing code patching routines, as well as the new routines added in the last commit. The self-tests are run late in boot when CONFIG_CODE_PATCHING_SELFTEST=y, which depends on DEBUG_KERNEL=y. Signed-off-by: Michael Ellerman Acked-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig.debug | 5 + arch/powerpc/lib/code-patching.c | 298 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 303 insertions(+) diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index a7d24e692bab..dc5893903363 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -57,6 +57,11 @@ config KGDB debugger. See for more information. Unless you are intending to debug the kernel, say N here. +config CODE_PATCHING_SELFTEST + bool "Run self-tests of the code-patching code." + depends on DEBUG_KERNEL + default n + choice prompt "Serial Port" depends on KGDB diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c index 27957c4ea9e0..0559fe086eb4 100644 --- a/arch/powerpc/lib/code-patching.c +++ b/arch/powerpc/lib/code-patching.c @@ -8,6 +8,9 @@ */ #include +#include +#include +#include #include @@ -148,3 +151,298 @@ unsigned int translate_branch(const unsigned int *dest, const unsigned int *src) return 0; } + + +#ifdef CONFIG_CODE_PATCHING_SELFTEST + +static void __init test_trampoline(void) +{ + asm ("nop;\n"); +} + +#define check(x) \ + if (!(x)) printk("code-patching: test failed at line %d\n", __LINE__); + +static void __init test_branch_iform(void) +{ + unsigned int instr; + unsigned long addr; + + addr = (unsigned long)&instr; + + /* The simplest case, branch to self, no flags */ + check(instr_is_branch_iform(0x48000000)); + /* All bits of target set, and flags */ + check(instr_is_branch_iform(0x4bffffff)); + /* High bit of opcode set, which is wrong */ + check(!instr_is_branch_iform(0xcbffffff)); + /* Middle bits of opcode set, which is wrong */ + check(!instr_is_branch_iform(0x7bffffff)); + + /* Simplest case, branch to self with link */ + check(instr_is_branch_iform(0x48000001)); + /* All bits of targets set */ + check(instr_is_branch_iform(0x4bfffffd)); + /* Some bits of targets set */ + check(instr_is_branch_iform(0x4bff00fd)); + /* Must be a valid branch to start with */ + check(!instr_is_branch_iform(0x7bfffffd)); + + /* Absolute branch to 0x100 */ + instr = 0x48000103; + check(instr_is_branch_to_addr(&instr, 0x100)); + /* Absolute branch to 0x420fc */ + instr = 0x480420ff; + check(instr_is_branch_to_addr(&instr, 0x420fc)); + /* Maximum positive relative branch, + 20MB - 4B */ + instr = 0x49fffffc; + check(instr_is_branch_to_addr(&instr, addr + 0x1FFFFFC)); + /* Smallest negative relative branch, - 4B */ + instr = 0x4bfffffc; + check(instr_is_branch_to_addr(&instr, addr - 4)); + /* Largest negative relative branch, - 32 MB */ + instr = 0x4a000000; + check(instr_is_branch_to_addr(&instr, addr - 0x2000000)); + + /* Branch to self, with link */ + instr = create_branch(&instr, addr, BRANCH_SET_LINK); + check(instr_is_branch_to_addr(&instr, addr)); + + /* Branch to self - 0x100, with link */ + instr = create_branch(&instr, addr - 0x100, BRANCH_SET_LINK); + check(instr_is_branch_to_addr(&instr, addr - 0x100)); + + /* Branch to self + 0x100, no link */ + instr = create_branch(&instr, addr + 0x100, 0); + check(instr_is_branch_to_addr(&instr, addr + 0x100)); + + /* Maximum relative negative offset, - 32 MB */ + instr = create_branch(&instr, addr - 0x2000000, BRANCH_SET_LINK); + check(instr_is_branch_to_addr(&instr, addr - 0x2000000)); + + /* Out of range relative negative offset, - 32 MB + 4*/ + instr = create_branch(&instr, addr - 0x2000004, BRANCH_SET_LINK); + check(instr == 0); + + /* Out of range relative positive offset, + 32 MB */ + instr = create_branch(&instr, addr + 0x2000000, BRANCH_SET_LINK); + check(instr == 0); + + /* Unaligned target */ + instr = create_branch(&instr, addr + 3, BRANCH_SET_LINK); + check(instr == 0); + + /* Check flags are masked correctly */ + instr = create_branch(&instr, addr, 0xFFFFFFFC); + check(instr_is_branch_to_addr(&instr, addr)); + check(instr == 0x48000000); +} + +static void __init test_create_function_call(void) +{ + unsigned int *iptr; + unsigned long dest; + + /* Check we can create a function call */ + iptr = (unsigned int *)ppc_function_entry(test_trampoline); + dest = ppc_function_entry(test_create_function_call); + patch_instruction(iptr, create_branch(iptr, dest, BRANCH_SET_LINK)); + check(instr_is_branch_to_addr(iptr, dest)); +} + +static void __init test_branch_bform(void) +{ + unsigned long addr; + unsigned int *iptr, instr, flags; + + iptr = &instr; + addr = (unsigned long)iptr; + + /* The simplest case, branch to self, no flags */ + check(instr_is_branch_bform(0x40000000)); + /* All bits of target set, and flags */ + check(instr_is_branch_bform(0x43ffffff)); + /* High bit of opcode set, which is wrong */ + check(!instr_is_branch_bform(0xc3ffffff)); + /* Middle bits of opcode set, which is wrong */ + check(!instr_is_branch_bform(0x7bffffff)); + + /* Absolute conditional branch to 0x100 */ + instr = 0x43ff0103; + check(instr_is_branch_to_addr(&instr, 0x100)); + /* Absolute conditional branch to 0x20fc */ + instr = 0x43ff20ff; + check(instr_is_branch_to_addr(&instr, 0x20fc)); + /* Maximum positive relative conditional branch, + 32 KB - 4B */ + instr = 0x43ff7ffc; + check(instr_is_branch_to_addr(&instr, addr + 0x7FFC)); + /* Smallest negative relative conditional branch, - 4B */ + instr = 0x43fffffc; + check(instr_is_branch_to_addr(&instr, addr - 4)); + /* Largest negative relative conditional branch, - 32 KB */ + instr = 0x43ff8000; + check(instr_is_branch_to_addr(&instr, addr - 0x8000)); + + /* All condition code bits set & link */ + flags = 0x3ff000 | BRANCH_SET_LINK; + + /* Branch to self */ + instr = create_cond_branch(iptr, addr, flags); + check(instr_is_branch_to_addr(&instr, addr)); + + /* Branch to self - 0x100 */ + instr = create_cond_branch(iptr, addr - 0x100, flags); + check(instr_is_branch_to_addr(&instr, addr - 0x100)); + + /* Branch to self + 0x100 */ + instr = create_cond_branch(iptr, addr + 0x100, flags); + check(instr_is_branch_to_addr(&instr, addr + 0x100)); + + /* Maximum relative negative offset, - 32 KB */ + instr = create_cond_branch(iptr, addr - 0x8000, flags); + check(instr_is_branch_to_addr(&instr, addr - 0x8000)); + + /* Out of range relative negative offset, - 32 KB + 4*/ + instr = create_cond_branch(iptr, addr - 0x8004, flags); + check(instr == 0); + + /* Out of range relative positive offset, + 32 KB */ + instr = create_cond_branch(iptr, addr + 0x8000, flags); + check(instr == 0); + + /* Unaligned target */ + instr = create_cond_branch(iptr, addr + 3, flags); + check(instr == 0); + + /* Check flags are masked correctly */ + instr = create_cond_branch(iptr, addr, 0xFFFFFFFC); + check(instr_is_branch_to_addr(&instr, addr)); + check(instr == 0x43FF0000); +} + +static void __init test_translate_branch(void) +{ + unsigned long addr; + unsigned int *p, *q; + void *buf; + + buf = vmalloc(PAGE_ALIGN(0x2000000 + 1)); + check(buf); + if (!buf) + return; + + /* Simple case, branch to self moved a little */ + p = buf; + addr = (unsigned long)p; + patch_branch(p, addr, 0); + check(instr_is_branch_to_addr(p, addr)); + q = p + 1; + patch_instruction(q, translate_branch(q, p)); + check(instr_is_branch_to_addr(q, addr)); + + /* Maximum negative case, move b . to addr + 32 MB */ + p = buf; + addr = (unsigned long)p; + patch_branch(p, addr, 0); + q = buf + 0x2000000; + patch_instruction(q, translate_branch(q, p)); + check(instr_is_branch_to_addr(p, addr)); + check(instr_is_branch_to_addr(q, addr)); + check(*q == 0x4a000000); + + /* Maximum positive case, move x to x - 32 MB + 4 */ + p = buf + 0x2000000; + addr = (unsigned long)p; + patch_branch(p, addr, 0); + q = buf + 4; + patch_instruction(q, translate_branch(q, p)); + check(instr_is_branch_to_addr(p, addr)); + check(instr_is_branch_to_addr(q, addr)); + check(*q == 0x49fffffc); + + /* Jump to x + 16 MB moved to x + 20 MB */ + p = buf; + addr = 0x1000000 + (unsigned long)buf; + patch_branch(p, addr, BRANCH_SET_LINK); + q = buf + 0x1400000; + patch_instruction(q, translate_branch(q, p)); + check(instr_is_branch_to_addr(p, addr)); + check(instr_is_branch_to_addr(q, addr)); + + /* Jump to x + 16 MB moved to x - 16 MB + 4 */ + p = buf + 0x1000000; + addr = 0x2000000 + (unsigned long)buf; + patch_branch(p, addr, 0); + q = buf + 4; + patch_instruction(q, translate_branch(q, p)); + check(instr_is_branch_to_addr(p, addr)); + check(instr_is_branch_to_addr(q, addr)); + + + /* Conditional branch tests */ + + /* Simple case, branch to self moved a little */ + p = buf; + addr = (unsigned long)p; + patch_instruction(p, create_cond_branch(p, addr, 0)); + check(instr_is_branch_to_addr(p, addr)); + q = p + 1; + patch_instruction(q, translate_branch(q, p)); + check(instr_is_branch_to_addr(q, addr)); + + /* Maximum negative case, move b . to addr + 32 KB */ + p = buf; + addr = (unsigned long)p; + patch_instruction(p, create_cond_branch(p, addr, 0xFFFFFFFC)); + q = buf + 0x8000; + patch_instruction(q, translate_branch(q, p)); + check(instr_is_branch_to_addr(p, addr)); + check(instr_is_branch_to_addr(q, addr)); + check(*q == 0x43ff8000); + + /* Maximum positive case, move x to x - 32 KB + 4 */ + p = buf + 0x8000; + addr = (unsigned long)p; + patch_instruction(p, create_cond_branch(p, addr, 0xFFFFFFFC)); + q = buf + 4; + patch_instruction(q, translate_branch(q, p)); + check(instr_is_branch_to_addr(p, addr)); + check(instr_is_branch_to_addr(q, addr)); + check(*q == 0x43ff7ffc); + + /* Jump to x + 12 KB moved to x + 20 KB */ + p = buf; + addr = 0x3000 + (unsigned long)buf; + patch_instruction(p, create_cond_branch(p, addr, BRANCH_SET_LINK)); + q = buf + 0x5000; + patch_instruction(q, translate_branch(q, p)); + check(instr_is_branch_to_addr(p, addr)); + check(instr_is_branch_to_addr(q, addr)); + + /* Jump to x + 8 KB moved to x - 8 KB + 4 */ + p = buf + 0x2000; + addr = 0x4000 + (unsigned long)buf; + patch_instruction(p, create_cond_branch(p, addr, 0)); + q = buf + 4; + patch_instruction(q, translate_branch(q, p)); + check(instr_is_branch_to_addr(p, addr)); + check(instr_is_branch_to_addr(q, addr)); + + /* Free the buffer we were using */ + vfree(buf); +} + +static int __init test_code_patching(void) +{ + printk(KERN_DEBUG "Running code patching self-tests ...\n"); + + test_branch_iform(); + test_branch_bform(); + test_create_function_call(); + test_translate_branch(); + + return 0; +} +late_initcall(test_code_patching); + +#endif /* CONFIG_CODE_PATCHING_SELFTEST */ -- cgit v1.2.3 From b7bcda631e87eb3466d0baa9885650ba7d7ed89d Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:32:35 +1000 Subject: powerpc: Add PPC_NOP_INSTR, a hash define for the preferred nop instruction A bunch of code has hard-coded the value for a "nop" instruction, it would be nice to have a #define for it. Signed-off-by: Michael Ellerman Acked-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cputable.c | 3 ++- arch/powerpc/kernel/crash_dump.c | 2 +- arch/powerpc/kernel/module_64.c | 3 ++- include/asm-powerpc/code-patching.h | 2 ++ 4 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index f8deb3761de4..ba5b23f54764 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -17,6 +17,7 @@ #include #include +#include #include #include /* for PTRRELOC on ARCH=ppc */ @@ -1663,7 +1664,7 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end) pend = ((unsigned int *)fcur) + (fcur->end_off / 4); for (p = pstart; p < pend; p++) { - *p = 0x60000000u; + *p = PPC_NOP_INSTR; asm volatile ("dcbst 0, %0" : : "r" (p)); } asm volatile ("sync" : : : "memory"); diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 26648544d5e4..e0debcca0bfa 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -44,7 +44,7 @@ static void __init create_trampoline(unsigned long addr) * branch to "addr" we jump to ("addr" + 32 MB). Although it requires * two instructions it doesn't require any registers. */ - patch_instruction(p, 0x60000000); /* nop */ + patch_instruction(p, PPC_NOP_INSTR); patch_branch(++p, addr + PHYSICAL_START, 0); } diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index 4803f2de98dd..ee6a2982d567 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include "setup.h" @@ -330,7 +331,7 @@ static unsigned long stub_for_addr(Elf64_Shdr *sechdrs, restore r2. */ static int restore_r2(u32 *instruction, struct module *me) { - if (*instruction != 0x60000000) { + if (*instruction != PPC_NOP_INSTR) { printk("%s: Expect noop after relocate, got %08x\n", me->name, *instruction); return 0; diff --git a/include/asm-powerpc/code-patching.h b/include/asm-powerpc/code-patching.h index 40ad46b1dd9d..ef3a5d156dba 100644 --- a/include/asm-powerpc/code-patching.h +++ b/include/asm-powerpc/code-patching.h @@ -12,6 +12,8 @@ #include +#define PPC_NOP_INSTR 0x60000000 + /* Flags for create_branch: * "b" == create_branch(addr, target, 0); * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE); -- cgit v1.2.3 From 51c52e86694f19e84600a40f6156889feafd8ae9 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:32:36 +1000 Subject: powerpc: Split out do_feature_fixups() from cputable.c The logic to patch CPU feature sections lives in cputable.c, but these days it's used for CPU features as well as firmware features. Move it into it's own file for neatness and as preparation for some additions. While we're moving the code, we pull the loop body logic into a separate routine, and remove a comment which doesn't apply anymore. Signed-off-by: Michael Ellerman Acked-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/cputable.c | 36 ------------------------- arch/powerpc/lib/Makefile | 1 + arch/powerpc/lib/feature-fixups.c | 56 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+), 36 deletions(-) create mode 100644 arch/powerpc/lib/feature-fixups.c diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index ba5b23f54764..817cea1b5ad3 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -17,7 +17,6 @@ #include #include -#include #include #include /* for PTRRELOC on ARCH=ppc */ @@ -1638,38 +1637,3 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr) BUG(); return NULL; } - -void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end) -{ - struct fixup_entry { - unsigned long mask; - unsigned long value; - long start_off; - long end_off; - } *fcur, *fend; - - fcur = fixup_start; - fend = fixup_end; - - for (; fcur < fend; fcur++) { - unsigned int *pstart, *pend, *p; - - if ((value & fcur->mask) == fcur->value) - continue; - - /* These PTRRELOCs will disappear once the new scheme for - * modules and vdso is implemented - */ - pstart = ((unsigned int *)fcur) + (fcur->start_off / 4); - pend = ((unsigned int *)fcur) + (fcur->end_off / 4); - - for (p = pstart; p < pend; p++) { - *p = PPC_NOP_INSTR; - asm volatile ("dcbst 0, %0" : : "r" (p)); - } - asm volatile ("sync" : : : "memory"); - for (p = pstart; p < pend; p++) - asm volatile ("icbi 0,%0" : : "r" (p)); - asm volatile ("sync; isync" : : : "memory"); - } -} diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index e7f7042b9f61..fc52771f0cdb 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -26,3 +26,4 @@ endif obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o obj-y += code-patching.o +obj-y += feature-fixups.o diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c new file mode 100644 index 000000000000..f6fd5d2ff10d --- /dev/null +++ b/arch/powerpc/lib/feature-fixups.c @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * Modifications for ppc64: + * Copyright (C) 2003 Dave Engebretsen + * + * Copyright 2008 Michael Ellerman, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + + +struct fixup_entry { + unsigned long mask; + unsigned long value; + long start_off; + long end_off; +}; + +static void patch_feature_section(unsigned long value, struct fixup_entry *fcur) +{ + unsigned int *pstart, *pend, *p; + + if ((value & fcur->mask) == fcur->value) + return; + + pstart = ((unsigned int *)fcur) + (fcur->start_off / 4); + pend = ((unsigned int *)fcur) + (fcur->end_off / 4); + + for (p = pstart; p < pend; p++) { + *p = PPC_NOP_INSTR; + asm volatile ("dcbst 0, %0" : : "r" (p)); + } + asm volatile ("sync" : : : "memory"); + for (p = pstart; p < pend; p++) + asm volatile ("icbi 0,%0" : : "r" (p)); + asm volatile ("sync; isync" : : : "memory"); +} + +void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end) +{ + struct fixup_entry *fcur, *fend; + + fcur = fixup_start; + fend = fixup_end; + + for (; fcur < fend; fcur++) + patch_feature_section(value, fcur); +} -- cgit v1.2.3 From c5157e587b33b1185cf73207fc53760cf1351430 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:32:39 +1000 Subject: powerpc: Consolidate CPU and firmware feature fixup macros The CPU and firmware feature fixup macros are currently spread across three files, firmware.h, cputable.h and asm-compat.h. Consolidate them into their own file, feature-fixups.h Signed-off-by: Michael Ellerman Acked-by: Kumar Gala Signed-off-by: Paul Mackerras --- include/asm-powerpc/asm-compat.h | 51 ------------------ include/asm-powerpc/cputable.h | 14 +---- include/asm-powerpc/feature-fixups.h | 102 +++++++++++++++++++++++++++++++++++ include/asm-powerpc/firmware.h | 13 +---- 4 files changed, 104 insertions(+), 76 deletions(-) create mode 100644 include/asm-powerpc/feature-fixups.h diff --git a/include/asm-powerpc/asm-compat.h b/include/asm-powerpc/asm-compat.h index c19e7367fce6..8ec2e1da68bf 100644 --- a/include/asm-powerpc/asm-compat.h +++ b/include/asm-powerpc/asm-compat.h @@ -15,57 +15,6 @@ #endif -/* - * Feature section common macros - * - * Note that the entries now contain offsets between the table entry - * and the code rather than absolute code pointers in order to be - * useable with the vdso shared library. There is also an assumption - * that values will be negative, that is, the fixup table has to be - * located after the code it fixes up. - */ -#ifdef CONFIG_PPC64 -#ifdef __powerpc64__ -/* 64 bits kernel, 64 bits code */ -#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ -99: \ - .section sect,"a"; \ - .align 3; \ -98: \ - .llong msk; \ - .llong val; \ - .llong label##b-98b; \ - .llong 99b-98b; \ - .previous -#else /* __powerpc64__ */ -/* 64 bits kernel, 32 bits code (ie. vdso32) */ -#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ -99: \ - .section sect,"a"; \ - .align 3; \ -98: \ - .llong msk; \ - .llong val; \ - .long 0xffffffff; \ - .long label##b-98b; \ - .long 0xffffffff; \ - .long 99b-98b; \ - .previous -#endif /* !__powerpc64__ */ -#else /* CONFIG_PPC64 */ -/* 32 bits kernel, 32 bits code */ -#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ -99: \ - .section sect,"a"; \ - .align 2; \ -98: \ - .long msk; \ - .long val; \ - .long label##b-98b; \ - .long 99b-98b; \ - .previous -#endif /* !CONFIG_PPC64 */ - #ifdef __powerpc64__ /* operations for longs and pointers */ diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 3189ac5d0a69..0d96b0284a73 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -32,6 +32,7 @@ #ifdef __KERNEL__ #include +#include #ifndef __ASSEMBLY__ @@ -489,18 +490,5 @@ static inline int cpu_has_feature(unsigned long feature) #endif /* !__ASSEMBLY__ */ -#ifdef __ASSEMBLY__ - -#define BEGIN_FTR_SECTION_NESTED(label) label: -#define BEGIN_FTR_SECTION BEGIN_FTR_SECTION_NESTED(97) -#define END_FTR_SECTION_NESTED(msk, val, label) \ - MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) -#define END_FTR_SECTION(msk, val) \ - END_FTR_SECTION_NESTED(msk, val, 97) - -#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk)) -#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0) -#endif /* __ASSEMBLY__ */ - #endif /* __KERNEL__ */ #endif /* __ASM_POWERPC_CPUTABLE_H */ diff --git a/include/asm-powerpc/feature-fixups.h b/include/asm-powerpc/feature-fixups.h new file mode 100644 index 000000000000..85972125bbb8 --- /dev/null +++ b/include/asm-powerpc/feature-fixups.h @@ -0,0 +1,102 @@ +#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H +#define __ASM_POWERPC_FEATURE_FIXUPS_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __ASSEMBLY__ + +/* + * Feature section common macros + * + * Note that the entries now contain offsets between the table entry + * and the code rather than absolute code pointers in order to be + * useable with the vdso shared library. There is also an assumption + * that values will be negative, that is, the fixup table has to be + * located after the code it fixes up. + */ +#ifdef CONFIG_PPC64 + +#ifdef __powerpc64__ + +/* 64 bits kernel, 64 bits code */ +#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ +99: \ + .section sect,"a"; \ + .align 3; \ +98: \ + .llong msk; \ + .llong val; \ + .llong label##b-98b; \ + .llong 99b-98b; \ + .previous + +#else /* __powerpc64__ */ + +/* 64 bits kernel, 32 bits code (ie. vdso32) */ +#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ +99: \ + .section sect,"a"; \ + .align 3; \ +98: \ + .llong msk; \ + .llong val; \ + .long 0xffffffff; \ + .long label##b-98b; \ + .long 0xffffffff; \ + .long 99b-98b; \ + .previous + +#endif /* !__powerpc64__ */ + +#else /* CONFIG_PPC64 */ + +/* 32 bits kernel, 32 bits code */ +#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ +99: \ + .section sect,"a"; \ + .align 2; \ +98: \ + .long msk; \ + .long val; \ + .long label##b-98b; \ + .long 99b-98b; \ + .previous + +#endif /* !CONFIG_PPC64 */ + + +/* CPU feature dependent sections */ +#define BEGIN_FTR_SECTION_NESTED(label) label: +#define BEGIN_FTR_SECTION BEGIN_FTR_SECTION_NESTED(97) + +#define END_FTR_SECTION_NESTED(msk, val, label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) + +#define END_FTR_SECTION(msk, val) \ + END_FTR_SECTION_NESTED(msk, val, 97) + +#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk)) +#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0) + + +/* Firmware feature dependent sections */ +#define BEGIN_FW_FTR_SECTION_NESTED(label) label: +#define BEGIN_FW_FTR_SECTION BEGIN_FW_FTR_SECTION_NESTED(97) + +#define END_FW_FTR_SECTION_NESTED(msk, val, label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) + +#define END_FW_FTR_SECTION(msk, val) \ + END_FW_FTR_SECTION_NESTED(msk, val, 97) + +#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk)) +#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0) + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */ diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h index 1e41bd1c8502..ef328995ba9d 100644 --- a/include/asm-powerpc/firmware.h +++ b/include/asm-powerpc/firmware.h @@ -15,6 +15,7 @@ #ifdef __KERNEL__ #include +#include /* firmware feature bitmask values */ #define FIRMWARE_MAX_FEATURES 63 @@ -125,18 +126,6 @@ extern int fwnmi_active; extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup; -#else /* __ASSEMBLY__ */ - -#define BEGIN_FW_FTR_SECTION_NESTED(label) label: -#define BEGIN_FW_FTR_SECTION BEGIN_FW_FTR_SECTION_NESTED(97) -#define END_FW_FTR_SECTION_NESTED(msk, val, label) \ - MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) -#define END_FW_FTR_SECTION(msk, val) \ - END_FW_FTR_SECTION_NESTED(msk, val, 97) - -#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk)) -#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0) - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* __ASM_POWERPC_FIRMWARE_H */ -- cgit v1.2.3 From c1137c37a9370f510dc022e6e95fff036ccb90be Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:32:48 +1000 Subject: powerpc: Consolidate feature fixup macros for 64/32 bit Currently we have three versions of MAKE_FTR_SECTION_ENTRY(), the macro that generates a feature section entry. There is 64bit version, a 32bit version and version for 32bit code built with a 64bit kernel. Rather than triplicating (?) the MAKE_FTR_SECTION_ENTRY() logic, we can move the 64bit/32bit differences into separate macros, and then only have one version of MAKE_FTR_SECTION_ENTRY(). Signed-off-by: Michael Ellerman Acked-by: Kumar Gala Signed-off-by: Paul Mackerras --- include/asm-powerpc/feature-fixups.h | 54 +++++++++--------------------------- 1 file changed, 13 insertions(+), 41 deletions(-) diff --git a/include/asm-powerpc/feature-fixups.h b/include/asm-powerpc/feature-fixups.h index 85972125bbb8..35f927888fe8 100644 --- a/include/asm-powerpc/feature-fixups.h +++ b/include/asm-powerpc/feature-fixups.h @@ -19,55 +19,27 @@ * that values will be negative, that is, the fixup table has to be * located after the code it fixes up. */ -#ifdef CONFIG_PPC64 - -#ifdef __powerpc64__ - -/* 64 bits kernel, 64 bits code */ -#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ -99: \ - .section sect,"a"; \ - .align 3; \ -98: \ - .llong msk; \ - .llong val; \ - .llong label##b-98b; \ - .llong 99b-98b; \ - .previous - -#else /* __powerpc64__ */ - +#if defined(CONFIG_PPC64) && !defined(__powerpc64__) /* 64 bits kernel, 32 bits code (ie. vdso32) */ +#define FTR_ENTRY_LONG .llong +#define FTR_ENTRY_OFFSET .long 0xffffffff; .long +#else +/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */ +#define FTR_ENTRY_LONG PPC_LONG +#define FTR_ENTRY_OFFSET PPC_LONG +#endif + #define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ 99: \ .section sect,"a"; \ .align 3; \ 98: \ - .llong msk; \ - .llong val; \ - .long 0xffffffff; \ - .long label##b-98b; \ - .long 0xffffffff; \ - .long 99b-98b; \ - .previous - -#endif /* !__powerpc64__ */ - -#else /* CONFIG_PPC64 */ - -/* 32 bits kernel, 32 bits code */ -#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ -99: \ - .section sect,"a"; \ - .align 2; \ -98: \ - .long msk; \ - .long val; \ - .long label##b-98b; \ - .long 99b-98b; \ + FTR_ENTRY_LONG msk; \ + FTR_ENTRY_LONG val; \ + FTR_ENTRY_OFFSET label##b-98b; \ + FTR_ENTRY_OFFSET 99b-98b; \ .previous -#endif /* !CONFIG_PPC64 */ /* CPU feature dependent sections */ -- cgit v1.2.3 From fac23fe4be23259a8eaa9bad822f5b14dd07d15c Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:32:54 +1000 Subject: powerpc: Introduce infrastructure for feature sections with alternatives The current feature section logic only supports nop'ing out code, this means if you want to choose at runtime between instruction sequences, one or both cases will have to execute the nop'ed out contents of the other section, eg: BEGIN_FTR_SECTION or 1,1,1 END_FTR_SECTION_IFSET(FOO) BEGIN_FTR_SECTION or 2,2,2 END_FTR_SECTION_IFCLR(FOO) and the resulting code will be either, or 1,1,1 nop or, nop or 2,2,2 For small code segments this is fine, but for larger code blocks and in performance criticial code segments, it would be nice to avoid the nops. This commit starts to implement logic to allow the following: BEGIN_FTR_SECTION or 1,1,1 FTR_SECTION_ELSE or 2,2,2 ALT_FTR_SECTION_END_IFSET(FOO) and the resulting code will be: or 1,1,1 or, or 2,2,2 We achieve this by extending the existing FTR macros. The current feature section semantic just becomes a special case, ie. if the else case is empty we nop out the default case. The key limitation is that the size of the else case must be less than or equal to the size of the default case. If the else case is smaller the remainder of the section is nop'ed. We let the linker put the else case code in with the rest of the text, so that relative branches from the else case are more likley to link, this has the disadvantage that we can't free the unused else cases. This commit introduces the required macro and linker script changes, but does not enable the patching of the alternative sections. We also need to update two hand-made section entries in reg.h and timex.h Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/vdso32/vdso32.lds.S | 2 +- arch/powerpc/kernel/vdso64/vdso64.lds.S | 2 +- arch/powerpc/kernel/vmlinux.lds.S | 2 +- arch/powerpc/lib/feature-fixups.c | 2 + include/asm-powerpc/feature-fixups.h | 68 ++++++++++++++++++++++++++------- include/asm-powerpc/reg.h | 2 + include/asm-powerpc/timex.h | 2 + 7 files changed, 64 insertions(+), 16 deletions(-) diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S index 9352ab5200e5..271793577cdc 100644 --- a/arch/powerpc/kernel/vdso32/vdso32.lds.S +++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S @@ -24,7 +24,7 @@ SECTIONS . = ALIGN(16); .text : { - *(.text .stub .text.* .gnu.linkonce.t.*) + *(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*) } PROVIDE(__etext = .); PROVIDE(_etext = .); diff --git a/arch/powerpc/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S index 7d6585f90277..e608d1bd3bff 100644 --- a/arch/powerpc/kernel/vdso64/vdso64.lds.S +++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S @@ -24,7 +24,7 @@ SECTIONS . = ALIGN(16); .text : { - *(.text .stub .text.* .gnu.linkonce.t.*) + *(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*) *(.sfpr .glink) } :text PROVIDE(__etext = .); diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 0c3000bf8d75..3c07811989fc 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -35,7 +35,7 @@ SECTIONS ALIGN_FUNCTION(); *(.text.head) _text = .; - *(.text .fixup .text.init.refok .exit.text.refok) + *(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*) SCHED_TEXT LOCK_TEXT KPROBES_TEXT diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c index f6fd5d2ff10d..973d547ef01d 100644 --- a/arch/powerpc/lib/feature-fixups.c +++ b/arch/powerpc/lib/feature-fixups.c @@ -22,6 +22,8 @@ struct fixup_entry { unsigned long value; long start_off; long end_off; + long alt_start_off; + long alt_end_off; }; static void patch_feature_section(unsigned long value, struct fixup_entry *fcur) diff --git a/include/asm-powerpc/feature-fixups.h b/include/asm-powerpc/feature-fixups.h index 35f927888fe8..ab30129dced7 100644 --- a/include/asm-powerpc/feature-fixups.h +++ b/include/asm-powerpc/feature-fixups.h @@ -29,24 +29,35 @@ #define FTR_ENTRY_OFFSET PPC_LONG #endif +#define START_FTR_SECTION(label) label##1: + +#define FTR_SECTION_ELSE_NESTED(label) \ +label##2: \ + .pushsection __ftr_alt_##label,"a"; \ + .align 2; \ +label##3: + #define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ -99: \ - .section sect,"a"; \ +label##4: \ + .popsection; \ + .pushsection sect,"a"; \ .align 3; \ -98: \ +label##5: \ FTR_ENTRY_LONG msk; \ FTR_ENTRY_LONG val; \ - FTR_ENTRY_OFFSET label##b-98b; \ - FTR_ENTRY_OFFSET 99b-98b; \ - .previous - + FTR_ENTRY_OFFSET label##1b-label##5b; \ + FTR_ENTRY_OFFSET label##2b-label##5b; \ + FTR_ENTRY_OFFSET label##3b-label##5b; \ + FTR_ENTRY_OFFSET label##4b-label##5b; \ + .popsection; /* CPU feature dependent sections */ -#define BEGIN_FTR_SECTION_NESTED(label) label: -#define BEGIN_FTR_SECTION BEGIN_FTR_SECTION_NESTED(97) +#define BEGIN_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) +#define BEGIN_FTR_SECTION START_FTR_SECTION(97) -#define END_FTR_SECTION_NESTED(msk, val, label) \ +#define END_FTR_SECTION_NESTED(msk, val, label) \ + FTR_SECTION_ELSE_NESTED(label) \ MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) #define END_FTR_SECTION(msk, val) \ @@ -55,12 +66,27 @@ #define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk)) #define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0) +/* CPU feature sections with alternatives, use BEGIN_FTR_SECTION to start */ +#define FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) +#define ALT_FTR_SECTION_END_NESTED(msk, val, label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) +#define ALT_FTR_SECTION_END_NESTED_IFSET(msk, label) \ + ALT_FTR_SECTION_END_NESTED(msk, msk, label) +#define ALT_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ + ALT_FTR_SECTION_END_NESTED(msk, 0, label) +#define ALT_FTR_SECTION_END(msk, val) \ + ALT_FTR_SECTION_END_NESTED(msk, val, 97) +#define ALT_FTR_SECTION_END_IFSET(msk) \ + ALT_FTR_SECTION_END_NESTED_IFSET(msk, 97) +#define ALT_FTR_SECTION_END_IFCLR(msk) \ + ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97) /* Firmware feature dependent sections */ -#define BEGIN_FW_FTR_SECTION_NESTED(label) label: -#define BEGIN_FW_FTR_SECTION BEGIN_FW_FTR_SECTION_NESTED(97) +#define BEGIN_FW_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) +#define BEGIN_FW_FTR_SECTION START_FTR_SECTION(97) -#define END_FW_FTR_SECTION_NESTED(msk, val, label) \ +#define END_FW_FTR_SECTION_NESTED(msk, val, label) \ + FTR_SECTION_ELSE_NESTED(label) \ MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) #define END_FW_FTR_SECTION(msk, val) \ @@ -69,6 +95,22 @@ #define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk)) #define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0) +/* Firmware feature sections with alternatives */ +#define FW_FTR_SECTION_ELSE_NESTED(label) FTR_SECTION_ELSE_NESTED(label) +#define FW_FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) +#define ALT_FW_FTR_SECTION_END_NESTED(msk, val, label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) +#define ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, label) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, msk, label) +#define ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, 0, label) +#define ALT_FW_FTR_SECTION_END(msk, val) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, val, 97) +#define ALT_FW_FTR_SECTION_END_IFSET(msk) \ + ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, 97) +#define ALT_FW_FTR_SECTION_END_IFCLR(msk) \ + ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97) + #endif /* __ASSEMBLY__ */ #endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */ diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index 079999b032af..7256efb5c140 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -732,6 +732,8 @@ " .llong %1\n" \ " .llong 97b-98b\n" \ " .llong 99b-98b\n" \ + " .llong 0\n" \ + " .llong 0\n" \ ".previous" \ : "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;}) #else diff --git a/include/asm-powerpc/timex.h b/include/asm-powerpc/timex.h index 92dedde761d1..c55e14f7ef44 100644 --- a/include/asm-powerpc/timex.h +++ b/include/asm-powerpc/timex.h @@ -38,6 +38,8 @@ static inline cycles_t get_cycles(void) " .long 0\n" " .long 97b-98b\n" " .long 99b-98b\n" + " .long 0\n" + " .long 0\n" ".previous" : "=r" (ret) : "i" (CPU_FTR_601)); return ret; -- cgit v1.2.3 From 9b1a735de64cc975c31a1642ec55e082ddbdfeaf Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:33:02 +1000 Subject: powerpc: Add logic to patch alternative feature sections This commit adds the logic to patch alternative sections. This is fairly straightforward, except for branches. Relative branches that jump from inside the else section to outside of it need to be translated as they're moved, otherwise they will jump to the wrong location. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/lib/feature-fixups.c | 79 ++++++++++++++++++++++++++++++++------- 1 file changed, 65 insertions(+), 14 deletions(-) diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c index 973d547ef01d..174c1eba9ac8 100644 --- a/arch/powerpc/lib/feature-fixups.c +++ b/arch/powerpc/lib/feature-fixups.c @@ -26,24 +26,66 @@ struct fixup_entry { long alt_end_off; }; -static void patch_feature_section(unsigned long value, struct fixup_entry *fcur) +static unsigned int *calc_addr(struct fixup_entry *fcur, long offset) { - unsigned int *pstart, *pend, *p; + /* + * We store the offset to the code as a negative offset from + * the start of the alt_entry, to support the VDSO. This + * routine converts that back into an actual address. + */ + return (unsigned int *)((unsigned long)fcur + offset); +} + +static int patch_alt_instruction(unsigned int *src, unsigned int *dest, + unsigned int *alt_start, unsigned int *alt_end) +{ + unsigned int instr; + + instr = *src; + + if (instr_is_relative_branch(*src)) { + unsigned int *target = (unsigned int *)branch_target(src); + + /* Branch within the section doesn't need translating */ + if (target < alt_start || target >= alt_end) { + instr = translate_branch(dest, src); + if (!instr) + return 1; + } + } + + patch_instruction(dest, instr); + + return 0; +} + +static int patch_feature_section(unsigned long value, struct fixup_entry *fcur) +{ + unsigned int *start, *end, *alt_start, *alt_end, *src, *dest; + + start = calc_addr(fcur, fcur->start_off); + end = calc_addr(fcur, fcur->end_off); + alt_start = calc_addr(fcur, fcur->alt_start_off); + alt_end = calc_addr(fcur, fcur->alt_end_off); + + if ((alt_end - alt_start) > (end - start)) + return 1; if ((value & fcur->mask) == fcur->value) - return; + return 0; - pstart = ((unsigned int *)fcur) + (fcur->start_off / 4); - pend = ((unsigned int *)fcur) + (fcur->end_off / 4); + src = alt_start; + dest = start; - for (p = pstart; p < pend; p++) { - *p = PPC_NOP_INSTR; - asm volatile ("dcbst 0, %0" : : "r" (p)); + for (; src < alt_end; src++, dest++) { + if (patch_alt_instruction(src, dest, alt_start, alt_end)) + return 1; } - asm volatile ("sync" : : : "memory"); - for (p = pstart; p < pend; p++) - asm volatile ("icbi 0,%0" : : "r" (p)); - asm volatile ("sync; isync" : : : "memory"); + + for (; dest < end; dest++) + patch_instruction(dest, PPC_NOP_INSTR); + + return 0; } void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end) @@ -53,6 +95,15 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end) fcur = fixup_start; fend = fixup_end; - for (; fcur < fend; fcur++) - patch_feature_section(value, fcur); + for (; fcur < fend; fcur++) { + if (patch_feature_section(value, fcur)) { + __WARN(); + printk("Unable to patch feature section at %p - %p" \ + " with %p - %p\n", + calc_addr(fcur, fcur->start_off), + calc_addr(fcur, fcur->end_off), + calc_addr(fcur, fcur->alt_start_off), + calc_addr(fcur, fcur->alt_end_off)); + } + } } -- cgit v1.2.3 From 362e7701fd183d990e0863883461edef61392710 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:33:03 +1000 Subject: powerpc: Add self-tests of the feature fixup code This commit adds tests of the feature fixup code, they are run during boot if CONFIG_FTR_FIXUP_SELFTEST=y. Some of the tests manually invoke the patching routines to check their behaviour, and others use the macros and so are patched during the normal patching done during boot. Because we have two sets of macros with different names, we use a macro to generate the test of the macros, very niiiice. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig.debug | 5 + arch/powerpc/lib/Makefile | 1 + arch/powerpc/lib/feature-fixups-test.S | 727 +++++++++++++++++++++++++++++++++ arch/powerpc/lib/feature-fixups.c | 206 ++++++++++ 4 files changed, 939 insertions(+) create mode 100644 arch/powerpc/lib/feature-fixups-test.S diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index dc5893903363..2840ab69ef4e 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -62,6 +62,11 @@ config CODE_PATCHING_SELFTEST depends on DEBUG_KERNEL default n +config FTR_FIXUP_SELFTEST + bool "Run self-tests of the feature-fixup code." + depends on DEBUG_KERNEL + default n + choice prompt "Serial Port" depends on KGDB diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index fc52771f0cdb..2a88e8b9a3c6 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -27,3 +27,4 @@ obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o obj-y += code-patching.o obj-y += feature-fixups.o +obj-$(CONFIG_FTR_FIXUP_SELFTEST) += feature-fixups-test.o diff --git a/arch/powerpc/lib/feature-fixups-test.S b/arch/powerpc/lib/feature-fixups-test.S new file mode 100644 index 000000000000..10d038b501a6 --- /dev/null +++ b/arch/powerpc/lib/feature-fixups-test.S @@ -0,0 +1,727 @@ +/* + * Copyright 2008 Michael Ellerman, IBM Corporation. + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include + + .text + +#define globl(x) \ + .globl x; \ +x: + +globl(ftr_fixup_test1) + or 1,1,1 + or 2,2,2 /* fixup will nop out this instruction */ + or 3,3,3 + +globl(end_ftr_fixup_test1) + +globl(ftr_fixup_test1_orig) + or 1,1,1 + or 2,2,2 + or 3,3,3 + +globl(ftr_fixup_test1_expected) + or 1,1,1 + nop + or 3,3,3 + +globl(ftr_fixup_test2) + or 1,1,1 + or 2,2,2 /* fixup will replace this with ftr_fixup_test2_alt */ + or 3,3,3 + +globl(end_ftr_fixup_test2) + +globl(ftr_fixup_test2_orig) + or 1,1,1 + or 2,2,2 + or 3,3,3 + +globl(ftr_fixup_test2_alt) + or 31,31,31 + +globl(ftr_fixup_test2_expected) + or 1,1,1 + or 31,31,31 + or 3,3,3 + +globl(ftr_fixup_test3) + or 1,1,1 + or 2,2,2 /* fixup will fail to replace this */ + or 3,3,3 + +globl(end_ftr_fixup_test3) + +globl(ftr_fixup_test3_orig) + or 1,1,1 + or 2,2,2 + or 3,3,3 + +globl(ftr_fixup_test3_alt) + or 31,31,31 + or 31,31,31 + +globl(ftr_fixup_test4) + or 1,1,1 + or 2,2,2 + or 2,2,2 + or 2,2,2 + or 2,2,2 + or 3,3,3 + +globl(end_ftr_fixup_test4) + +globl(ftr_fixup_test4_expected) + or 1,1,1 + or 31,31,31 + or 31,31,31 + nop + nop + or 3,3,3 + +globl(ftr_fixup_test4_orig) + or 1,1,1 + or 2,2,2 + or 2,2,2 + or 2,2,2 + or 2,2,2 + or 3,3,3 + +globl(ftr_fixup_test4_alt) + or 31,31,31 + or 31,31,31 + + +globl(ftr_fixup_test5) + or 1,1,1 +BEGIN_FTR_SECTION + or 2,2,2 + or 2,2,2 + or 2,2,2 + or 2,2,2 + or 2,2,2 + or 2,2,2 + or 2,2,2 +FTR_SECTION_ELSE +2: b 3f +3: or 5,5,5 + beq 3b + b 1f + or 6,6,6 + b 2b +1: bdnz 3b +ALT_FTR_SECTION_END(0, 1) + or 1,1,1 + +globl(end_ftr_fixup_test5) + +globl(ftr_fixup_test5_expected) + or 1,1,1 +2: b 3f +3: or 5,5,5 + beq 3b + b 1f + or 6,6,6 + b 2b +1: bdnz 3b + or 1,1,1 + +globl(ftr_fixup_test6) +1: or 1,1,1 +BEGIN_FTR_SECTION + or 5,5,5 +2: cmpdi r3,0 + beq 4f + blt 2b + b 1b + b 4f +FTR_SECTION_ELSE +2: or 2,2,2 + cmpdi r3,1 + beq 3f + blt 2b + b 3f + b 1b +ALT_FTR_SECTION_END(0, 1) +3: or 1,1,1 + or 2,2,2 +4: or 3,3,3 + +globl(end_ftr_fixup_test6) + +globl(ftr_fixup_test6_expected) +1: or 1,1,1 +2: or 2,2,2 + cmpdi r3,1 + beq 3f + blt 2b + b 3f + b 1b +2: or 1,1,1 + or 2,2,2 +3: or 3,3,3 + + +#define MAKE_MACRO_TEST(TYPE) \ +globl(ftr_fixup_test_ ##TYPE##_macros) \ + or 1,1,1; \ + /* Basic test, this section should all be nop'ed */ \ +BEGIN_##TYPE##_SECTION \ + or 2,2,2; \ + or 2,2,2; \ + or 2,2,2; \ +END_##TYPE##_SECTION(0, 1) \ + or 1,1,1; \ + or 1,1,1; \ + /* Basic test, this section should NOT be nop'ed */ \ +BEGIN_##TYPE##_SECTION \ + or 2,2,2; \ + or 2,2,2; \ + or 2,2,2; \ +END_##TYPE##_SECTION(0, 0) \ + or 1,1,1; \ + or 1,1,1; \ + /* Nesting test, inner section should be nop'ed */ \ +BEGIN_##TYPE##_SECTION \ + or 2,2,2; \ + or 2,2,2; \ +BEGIN_##TYPE##_SECTION_NESTED(80) \ + or 3,3,3; \ + or 3,3,3; \ +END_##TYPE##_SECTION_NESTED(0, 1, 80) \ + or 2,2,2; \ + or 2,2,2; \ +END_##TYPE##_SECTION(0, 0) \ + or 1,1,1; \ + or 1,1,1; \ + /* Nesting test, whole section should be nop'ed */ \ +BEGIN_##TYPE##_SECTION \ + or 2,2,2; \ + or 2,2,2; \ +BEGIN_##TYPE##_SECTION_NESTED(80) \ + or 3,3,3; \ + or 3,3,3; \ +END_##TYPE##_SECTION_NESTED(0, 0, 80) \ + or 2,2,2; \ + or 2,2,2; \ +END_##TYPE##_SECTION(0, 1) \ + or 1,1,1; \ + or 1,1,1; \ + /* Nesting test, none should be nop'ed */ \ +BEGIN_##TYPE##_SECTION \ + or 2,2,2; \ + or 2,2,2; \ +BEGIN_##TYPE##_SECTION_NESTED(80) \ + or 3,3,3; \ + or 3,3,3; \ +END_##TYPE##_SECTION_NESTED(0, 0, 80) \ + or 2,2,2; \ + or 2,2,2; \ +END_##TYPE##_SECTION(0, 0) \ + or 1,1,1; \ + or 1,1,1; \ + /* Basic alt section test, default case should be taken */ \ +BEGIN_##TYPE##_SECTION \ + or 3,3,3; \ + or 3,3,3; \ + or 3,3,3; \ +##TYPE##_SECTION_ELSE \ + or 5,5,5; \ + or 5,5,5; \ +ALT_##TYPE##_SECTION_END(0, 0) \ + or 1,1,1; \ + or 1,1,1; \ + /* Basic alt section test, else case should be taken */ \ +BEGIN_##TYPE##_SECTION \ + or 3,3,3; \ + or 3,3,3; \ + or 3,3,3; \ +##TYPE##_SECTION_ELSE \ + or 31,31,31; \ + or 31,31,31; \ + or 31,31,31; \ +ALT_##TYPE##_SECTION_END(0, 1) \ + or 1,1,1; \ + or 1,1,1; \ + /* Alt with smaller else case, should be padded with nops */ \ +BEGIN_##TYPE##_SECTION \ + or 3,3,3; \ + or 3,3,3; \ + or 3,3,3; \ +##TYPE##_SECTION_ELSE \ + or 31,31,31; \ +ALT_##TYPE##_SECTION_END(0, 1) \ + or 1,1,1; \ + or 1,1,1; \ + /* Alt section with nested section in default case */ \ + /* Default case should be taken, with nop'ed inner section */ \ +BEGIN_##TYPE##_SECTION \ + or 3,3,3; \ +BEGIN_##TYPE##_SECTION_NESTED(95) \ + or 3,3,3; \ + or 3,3,3; \ +END_##TYPE##_SECTION_NESTED(0, 1, 95) \ + or 3,3,3; \ +##TYPE##_SECTION_ELSE \ + or 2,2,2; \ + or 2,2,2; \ +ALT_##TYPE##_SECTION_END(0, 0) \ + or 1,1,1; \ + or 1,1,1; \ + /* Alt section with nested section in else, default taken */ \ +BEGIN_##TYPE##_SECTION \ + or 3,3,3; \ + or 3,3,3; \ + or 3,3,3; \ +##TYPE##_SECTION_ELSE \ + or 5,5,5; \ +BEGIN_##TYPE##_SECTION_NESTED(95) \ + or 3,3,3; \ +END_##TYPE##_SECTION_NESTED(0, 1, 95) \ + or 5,5,5; \ +ALT_##TYPE##_SECTION_END(0, 0) \ + or 1,1,1; \ + or 1,1,1; \ + /* Alt section with nested section in else, else taken & nop */ \ +BEGIN_##TYPE##_SECTION \ + or 3,3,3; \ + or 3,3,3; \ + or 3,3,3; \ +##TYPE##_SECTION_ELSE \ + or 5,5,5; \ +BEGIN_##TYPE##_SECTION_NESTED(95) \ + or 3,3,3; \ +END_##TYPE##_SECTION_NESTED(0, 1, 95) \ + or 5,5,5; \ +ALT_##TYPE##_SECTION_END(0, 1) \ + or 1,1,1; \ + or 1,1,1; \ + /* Feature section with nested alt section, default taken */ \ +BEGIN_##TYPE##_SECTION \ + or 2,2,2; \ +BEGIN_##TYPE##_SECTION_NESTED(95) \ + or 1,1,1; \ +##TYPE##_SECTION_ELSE_NESTED(95) \ + or 5,5,5; \ +ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) \ + or 2,2,2; \ +END_##TYPE##_SECTION(0, 0) \ + or 1,1,1; \ + or 1,1,1; \ + /* Feature section with nested alt section, else taken */ \ +BEGIN_##TYPE##_SECTION \ + or 2,2,2; \ +BEGIN_##TYPE##_SECTION_NESTED(95) \ + or 1,1,1; \ +##TYPE##_SECTION_ELSE_NESTED(95) \ + or 5,5,5; \ +ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) \ + or 2,2,2; \ +END_##TYPE##_SECTION(0, 0) \ + or 1,1,1; \ + or 1,1,1; \ + /* Feature section with nested alt section, all nop'ed */ \ +BEGIN_##TYPE##_SECTION \ + or 2,2,2; \ +BEGIN_##TYPE##_SECTION_NESTED(95) \ + or 1,1,1; \ +##TYPE##_SECTION_ELSE_NESTED(95) \ + or 5,5,5; \ +ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) \ + or 2,2,2; \ +END_##TYPE##_SECTION(0, 1) \ + or 1,1,1; \ + or 1,1,1; \ + /* Nested alt sections, default with inner default taken */ \ +BEGIN_##TYPE##_SECTION \ + or 2,2,2; \ +BEGIN_##TYPE##_SECTION_NESTED(95) \ + or 1,1,1; \ +##TYPE##_SECTION_ELSE_NESTED(95) \ + or 5,5,5; \ +ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) \ + or 2,2,2; \ +##TYPE##_SECTION_ELSE \ + or 31,31,31; \ +BEGIN_##TYPE##_SECTION_NESTED(94) \ + or 5,5,5; \ +##TYPE##_SECTION_ELSE_NESTED(94) \ + or 1,1,1; \ +ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) \ + or 31,31,31; \ +ALT_##TYPE##_SECTION_END(0, 0) \ + or 1,1,1; \ + or 1,1,1; \ + /* Nested alt sections, default with inner else taken */ \ +BEGIN_##TYPE##_SECTION \ + or 2,2,2; \ +BEGIN_##TYPE##_SECTION_NESTED(95) \ + or 1,1,1; \ +##TYPE##_SECTION_ELSE_NESTED(95) \ + or 5,5,5; \ +ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) \ + or 2,2,2; \ +##TYPE##_SECTION_ELSE \ + or 31,31,31; \ +BEGIN_##TYPE##_SECTION_NESTED(94) \ + or 5,5,5; \ +##TYPE##_SECTION_ELSE_NESTED(94) \ + or 1,1,1; \ +ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) \ + or 31,31,31; \ +ALT_##TYPE##_SECTION_END(0, 0) \ + or 1,1,1; \ + or 1,1,1; \ + /* Nested alt sections, else with inner default taken */ \ +BEGIN_##TYPE##_SECTION \ + or 2,2,2; \ +BEGIN_##TYPE##_SECTION_NESTED(95) \ + or 1,1,1; \ +##TYPE##_SECTION_ELSE_NESTED(95) \ + or 5,5,5; \ +ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) \ + or 2,2,2; \ +##TYPE##_SECTION_ELSE \ + or 31,31,31; \ +BEGIN_##TYPE##_SECTION_NESTED(94) \ + or 5,5,5; \ +##TYPE##_SECTION_ELSE_NESTED(94) \ + or 1,1,1; \ +ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) \ + or 31,31,31; \ +ALT_##TYPE##_SECTION_END(0, 1) \ + or 1,1,1; \ + or 1,1,1; \ + /* Nested alt sections, else with inner else taken */ \ +BEGIN_##TYPE##_SECTION \ + or 2,2,2; \ +BEGIN_##TYPE##_SECTION_NESTED(95) \ + or 1,1,1; \ +##TYPE##_SECTION_ELSE_NESTED(95) \ + or 5,5,5; \ +ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) \ + or 2,2,2; \ +##TYPE##_SECTION_ELSE \ + or 31,31,31; \ +BEGIN_##TYPE##_SECTION_NESTED(94) \ + or 5,5,5; \ +##TYPE##_SECTION_ELSE_NESTED(94) \ + or 1,1,1; \ +ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94) \ + or 31,31,31; \ +ALT_##TYPE##_SECTION_END(0, 1) \ + or 1,1,1; \ + or 1,1,1; \ + /* Nested alt sections, else can have large else case */ \ +BEGIN_##TYPE##_SECTION \ + or 2,2,2; \ + or 2,2,2; \ + or 2,2,2; \ + or 2,2,2; \ +##TYPE##_SECTION_ELSE \ +BEGIN_##TYPE##_SECTION_NESTED(94) \ + or 5,5,5; \ + or 5,5,5; \ + or 5,5,5; \ + or 5,5,5; \ +##TYPE##_SECTION_ELSE_NESTED(94) \ + or 1,1,1; \ + or 1,1,1; \ + or 1,1,1; \ + or 1,1,1; \ +ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94) \ +ALT_##TYPE##_SECTION_END(0, 1) \ + or 1,1,1; \ + or 1,1,1; + +#define MAKE_MACRO_TEST_EXPECTED(TYPE) \ +globl(ftr_fixup_test_ ##TYPE##_macros_expected) \ + or 1,1,1; \ + /* Basic test, this section should all be nop'ed */ \ +/* BEGIN_##TYPE##_SECTION */ \ + nop; \ + nop; \ + nop; \ +/* END_##TYPE##_SECTION(0, 1) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Basic test, this section should NOT be nop'ed */ \ +/* BEGIN_##TYPE##_SECTION */ \ + or 2,2,2; \ + or 2,2,2; \ + or 2,2,2; \ +/* END_##TYPE##_SECTION(0, 0) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Nesting test, inner section should be nop'ed */ \ +/* BEGIN_##TYPE##_SECTION */ \ + or 2,2,2; \ + or 2,2,2; \ +/* BEGIN_##TYPE##_SECTION_NESTED(80) */ \ + nop; \ + nop; \ +/* END_##TYPE##_SECTION_NESTED(0, 1, 80) */ \ + or 2,2,2; \ + or 2,2,2; \ +/* END_##TYPE##_SECTION(0, 0) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Nesting test, whole section should be nop'ed */ \ + /* NB. inner section is not nop'ed, but then entire outer is */ \ +/* BEGIN_##TYPE##_SECTION */ \ + nop; \ + nop; \ +/* BEGIN_##TYPE##_SECTION_NESTED(80) */ \ + nop; \ + nop; \ +/* END_##TYPE##_SECTION_NESTED(0, 0, 80) */ \ + nop; \ + nop; \ +/* END_##TYPE##_SECTION(0, 1) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Nesting test, none should be nop'ed */ \ +/* BEGIN_##TYPE##_SECTION */ \ + or 2,2,2; \ + or 2,2,2; \ +/* BEGIN_##TYPE##_SECTION_NESTED(80) */ \ + or 3,3,3; \ + or 3,3,3; \ +/* END_##TYPE##_SECTION_NESTED(0, 0, 80) */ \ + or 2,2,2; \ + or 2,2,2; \ +/* END_##TYPE##_SECTION(0, 0) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Basic alt section test, default case should be taken */ \ +/* BEGIN_##TYPE##_SECTION */ \ + or 3,3,3; \ + or 3,3,3; \ + or 3,3,3; \ +/* ##TYPE##_SECTION_ELSE */ \ + /* or 5,5,5; */ \ + /* or 5,5,5; */ \ +/* ALT_##TYPE##_SECTION_END(0, 0) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Basic alt section test, else case should be taken */ \ +/* BEGIN_##TYPE##_SECTION */ \ + /* or 3,3,3; */ \ + /* or 3,3,3; */ \ + /* or 3,3,3; */ \ +/* ##TYPE##_SECTION_ELSE */ \ + or 31,31,31; \ + or 31,31,31; \ + or 31,31,31; \ +/* ALT_##TYPE##_SECTION_END(0, 1) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Alt with smaller else case, should be padded with nops */ \ +/* BEGIN_##TYPE##_SECTION */ \ + /* or 3,3,3; */ \ + /* or 3,3,3; */ \ + /* or 3,3,3; */ \ +/* ##TYPE##_SECTION_ELSE */ \ + or 31,31,31; \ + nop; \ + nop; \ +/* ALT_##TYPE##_SECTION_END(0, 1) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Alt section with nested section in default case */ \ + /* Default case should be taken, with nop'ed inner section */ \ +/* BEGIN_##TYPE##_SECTION */ \ + or 3,3,3; \ +/* BEGIN_##TYPE##_SECTION_NESTED(95) */ \ + nop; \ + nop; \ +/* END_##TYPE##_SECTION_NESTED(0, 1, 95) */ \ + or 3,3,3; \ +/* ##TYPE##_SECTION_ELSE */ \ + /* or 2,2,2; */ \ + /* or 2,2,2; */ \ +/* ALT_##TYPE##_SECTION_END(0, 0) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Alt section with nested section in else, default taken */ \ +/* BEGIN_##TYPE##_SECTION */ \ + or 3,3,3; \ + or 3,3,3; \ + or 3,3,3; \ +/* ##TYPE##_SECTION_ELSE */ \ + /* or 5,5,5; */ \ +/* BEGIN_##TYPE##_SECTION_NESTED(95) */ \ + /* or 3,3,3; */ \ +/* END_##TYPE##_SECTION_NESTED(0, 1, 95) */ \ + /* or 5,5,5; */ \ +/* ALT_##TYPE##_SECTION_END(0, 0) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Alt section with nested section in else, else taken & nop */ \ +/* BEGIN_##TYPE##_SECTION */ \ + /* or 3,3,3; */ \ + /* or 3,3,3; */ \ + /* or 3,3,3; */ \ +/* ##TYPE##_SECTION_ELSE */ \ + or 5,5,5; \ +/* BEGIN_##TYPE##_SECTION_NESTED(95) */ \ + nop; \ +/* END_##TYPE##_SECTION_NESTED(0, 1, 95) */ \ + or 5,5,5; \ +/* ALT_##TYPE##_SECTION_END(0, 1) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Feature section with nested alt section, default taken */ \ +/* BEGIN_##TYPE##_SECTION */ \ + or 2,2,2; \ +/* BEGIN_##TYPE##_SECTION_NESTED(95) */ \ + or 1,1,1; \ +/* ##TYPE##_SECTION_ELSE_NESTED(95) */ \ + /* or 5,5,5; */ \ +/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) */ \ + or 2,2,2; \ +/* END_##TYPE##_SECTION(0, 0) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Feature section with nested alt section, else taken */ \ +/* BEGIN_##TYPE##_SECTION */ \ + or 2,2,2; \ +/* BEGIN_##TYPE##_SECTION_NESTED(95) */ \ + /* or 1,1,1; */ \ +/* ##TYPE##_SECTION_ELSE_NESTED(95) */ \ + or 5,5,5; \ +/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */ \ + or 2,2,2; \ +/* END_##TYPE##_SECTION(0, 0) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Feature section with nested alt section, all nop'ed */ \ +/* BEGIN_##TYPE##_SECTION */ \ + nop; \ +/* BEGIN_##TYPE##_SECTION_NESTED(95) */ \ + nop; \ +/* ##TYPE##_SECTION_ELSE_NESTED(95) */ \ + /* or 5,5,5; */ \ +/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) */ \ + nop; \ +/* END_##TYPE##_SECTION(0, 1) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Nested alt sections, default with inner default taken */ \ +/* BEGIN_##TYPE##_SECTION */ \ + or 2,2,2; \ +/* BEGIN_##TYPE##_SECTION_NESTED(95) */ \ + or 1,1,1; \ +/* ##TYPE##_SECTION_ELSE_NESTED(95) */ \ + /* or 5,5,5; */ \ +/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) */ \ + or 2,2,2; \ +/* ##TYPE##_SECTION_ELSE */ \ + /* or 31,31,31; */ \ +/* BEGIN_##TYPE##_SECTION_NESTED(94) */ \ + /* or 5,5,5; */ \ +/* ##TYPE##_SECTION_ELSE_NESTED(94) */ \ + /* or 1,1,1; */ \ +/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) */ \ + /* or 31,31,31; */ \ +/* ALT_##TYPE##_SECTION_END(0, 0) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Nested alt sections, default with inner else taken */ \ +/* BEGIN_##TYPE##_SECTION */ \ + or 2,2,2; \ +/* BEGIN_##TYPE##_SECTION_NESTED(95) */ \ + /* or 1,1,1; */ \ +/* ##TYPE##_SECTION_ELSE_NESTED(95) */ \ + or 5,5,5; \ +/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */ \ + or 2,2,2; \ +/* ##TYPE##_SECTION_ELSE */ \ + /* or 31,31,31; */ \ +/* BEGIN_##TYPE##_SECTION_NESTED(94) */ \ + /* or 5,5,5; */ \ +/* ##TYPE##_SECTION_ELSE_NESTED(94) */ \ + /* or 1,1,1; */ \ +/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) */ \ + /* or 31,31,31; */ \ +/* ALT_##TYPE##_SECTION_END(0, 0) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Nested alt sections, else with inner default taken */ \ +/* BEGIN_##TYPE##_SECTION */ \ + /* or 2,2,2; */ \ +/* BEGIN_##TYPE##_SECTION_NESTED(95) */ \ + /* or 1,1,1; */ \ +/* ##TYPE##_SECTION_ELSE_NESTED(95) */ \ + /* or 5,5,5; */ \ +/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */ \ + /* or 2,2,2; */ \ +/* ##TYPE##_SECTION_ELSE */ \ + or 31,31,31; \ +/* BEGIN_##TYPE##_SECTION_NESTED(94) */ \ + or 5,5,5; \ +/* ##TYPE##_SECTION_ELSE_NESTED(94) */ \ + /* or 1,1,1; */ \ +/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) */ \ + or 31,31,31; \ +/* ALT_##TYPE##_SECTION_END(0, 1) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Nested alt sections, else with inner else taken */ \ +/* BEGIN_##TYPE##_SECTION */ \ + /* or 2,2,2; */ \ +/* BEGIN_##TYPE##_SECTION_NESTED(95) */ \ + /* or 1,1,1; */ \ +/* ##TYPE##_SECTION_ELSE_NESTED(95) */ \ + /* or 5,5,5; */ \ +/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */ \ + /* or 2,2,2; */ \ +/* ##TYPE##_SECTION_ELSE */ \ + or 31,31,31; \ +/* BEGIN_##TYPE##_SECTION_NESTED(94) */ \ + /* or 5,5,5; */ \ +/* ##TYPE##_SECTION_ELSE_NESTED(94) */ \ + or 1,1,1; \ +/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94) */ \ + or 31,31,31; \ +/* ALT_##TYPE##_SECTION_END(0, 1) */ \ + or 1,1,1; \ + or 1,1,1; \ + /* Nested alt sections, else can have large else case */ \ +/* BEGIN_##TYPE##_SECTION */ \ + /* or 2,2,2; */ \ + /* or 2,2,2; */ \ + /* or 2,2,2; */ \ + /* or 2,2,2; */ \ +/* ##TYPE##_SECTION_ELSE */ \ +/* BEGIN_##TYPE##_SECTION_NESTED(94) */ \ + /* or 5,5,5; */ \ + /* or 5,5,5; */ \ + /* or 5,5,5; */ \ + /* or 5,5,5; */ \ +/* ##TYPE##_SECTION_ELSE_NESTED(94) */ \ + or 1,1,1; \ + or 1,1,1; \ + or 1,1,1; \ + or 1,1,1; \ +/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94) */ \ +/* ALT_##TYPE##_SECTION_END(0, 1) */ \ + or 1,1,1; \ + or 1,1,1; + +MAKE_MACRO_TEST(FTR); +MAKE_MACRO_TEST_EXPECTED(FTR); + +#ifdef CONFIG_PPC64 +MAKE_MACRO_TEST(FW_FTR); +MAKE_MACRO_TEST_EXPECTED(FW_FTR); +#endif diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c index 174c1eba9ac8..48e1ed89052d 100644 --- a/arch/powerpc/lib/feature-fixups.c +++ b/arch/powerpc/lib/feature-fixups.c @@ -13,6 +13,8 @@ */ #include +#include +#include #include #include @@ -107,3 +109,207 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end) } } } + +#ifdef CONFIG_FTR_FIXUP_SELFTEST + +#define check(x) \ + if (!(x)) printk("feature-fixups: test failed at line %d\n", __LINE__); + +/* This must be after the text it fixes up, vmlinux.lds.S enforces that atm */ +static struct fixup_entry fixup; + +static long calc_offset(struct fixup_entry *entry, unsigned int *p) +{ + return (unsigned long)p - (unsigned long)entry; +} + +void test_basic_patching(void) +{ + extern unsigned int ftr_fixup_test1; + extern unsigned int end_ftr_fixup_test1; + extern unsigned int ftr_fixup_test1_orig; + extern unsigned int ftr_fixup_test1_expected; + int size = &end_ftr_fixup_test1 - &ftr_fixup_test1; + + fixup.value = fixup.mask = 8; + fixup.start_off = calc_offset(&fixup, &ftr_fixup_test1 + 1); + fixup.end_off = calc_offset(&fixup, &ftr_fixup_test1 + 2); + fixup.alt_start_off = fixup.alt_end_off = 0; + + /* Sanity check */ + check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0); + + /* Check we don't patch if the value matches */ + patch_feature_section(8, &fixup); + check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0); + + /* Check we do patch if the value doesn't match */ + patch_feature_section(0, &fixup); + check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_expected, size) == 0); + + /* Check we do patch if the mask doesn't match */ + memcpy(&ftr_fixup_test1, &ftr_fixup_test1_orig, size); + check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0); + patch_feature_section(~8, &fixup); + check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_expected, size) == 0); +} + +static void test_alternative_patching(void) +{ + extern unsigned int ftr_fixup_test2; + extern unsigned int end_ftr_fixup_test2; + extern unsigned int ftr_fixup_test2_orig; + extern unsigned int ftr_fixup_test2_alt; + extern unsigned int ftr_fixup_test2_expected; + int size = &end_ftr_fixup_test2 - &ftr_fixup_test2; + + fixup.value = fixup.mask = 0xF; + fixup.start_off = calc_offset(&fixup, &ftr_fixup_test2 + 1); + fixup.end_off = calc_offset(&fixup, &ftr_fixup_test2 + 2); + fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test2_alt); + fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test2_alt + 1); + + /* Sanity check */ + check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0); + + /* Check we don't patch if the value matches */ + patch_feature_section(0xF, &fixup); + check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0); + + /* Check we do patch if the value doesn't match */ + patch_feature_section(0, &fixup); + check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_expected, size) == 0); + + /* Check we do patch if the mask doesn't match */ + memcpy(&ftr_fixup_test2, &ftr_fixup_test2_orig, size); + check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0); + patch_feature_section(~0xF, &fixup); + check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_expected, size) == 0); +} + +static void test_alternative_case_too_big(void) +{ + extern unsigned int ftr_fixup_test3; + extern unsigned int end_ftr_fixup_test3; + extern unsigned int ftr_fixup_test3_orig; + extern unsigned int ftr_fixup_test3_alt; + int size = &end_ftr_fixup_test3 - &ftr_fixup_test3; + + fixup.value = fixup.mask = 0xC; + fixup.start_off = calc_offset(&fixup, &ftr_fixup_test3 + 1); + fixup.end_off = calc_offset(&fixup, &ftr_fixup_test3 + 2); + fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test3_alt); + fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test3_alt + 2); + + /* Sanity check */ + check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0); + + /* Expect nothing to be patched, and the error returned to us */ + check(patch_feature_section(0xF, &fixup) == 1); + check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0); + check(patch_feature_section(0, &fixup) == 1); + check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0); + check(patch_feature_section(~0xF, &fixup) == 1); + check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0); +} + +static void test_alternative_case_too_small(void) +{ + extern unsigned int ftr_fixup_test4; + extern unsigned int end_ftr_fixup_test4; + extern unsigned int ftr_fixup_test4_orig; + extern unsigned int ftr_fixup_test4_alt; + extern unsigned int ftr_fixup_test4_expected; + int size = &end_ftr_fixup_test4 - &ftr_fixup_test4; + unsigned long flag; + + /* Check a high-bit flag */ + flag = 1UL << ((sizeof(unsigned long) - 1) * 8); + fixup.value = fixup.mask = flag; + fixup.start_off = calc_offset(&fixup, &ftr_fixup_test4 + 1); + fixup.end_off = calc_offset(&fixup, &ftr_fixup_test4 + 5); + fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test4_alt); + fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test4_alt + 2); + + /* Sanity check */ + check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0); + + /* Check we don't patch if the value matches */ + patch_feature_section(flag, &fixup); + check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0); + + /* Check we do patch if the value doesn't match */ + patch_feature_section(0, &fixup); + check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_expected, size) == 0); + + /* Check we do patch if the mask doesn't match */ + memcpy(&ftr_fixup_test4, &ftr_fixup_test4_orig, size); + check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0); + patch_feature_section(~flag, &fixup); + check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_expected, size) == 0); +} + +static void test_alternative_case_with_branch(void) +{ + extern unsigned int ftr_fixup_test5; + extern unsigned int end_ftr_fixup_test5; + extern unsigned int ftr_fixup_test5_expected; + int size = &end_ftr_fixup_test5 - &ftr_fixup_test5; + + check(memcmp(&ftr_fixup_test5, &ftr_fixup_test5_expected, size) == 0); +} + +static void test_alternative_case_with_external_branch(void) +{ + extern unsigned int ftr_fixup_test6; + extern unsigned int end_ftr_fixup_test6; + extern unsigned int ftr_fixup_test6_expected; + int size = &end_ftr_fixup_test6 - &ftr_fixup_test6; + + check(memcmp(&ftr_fixup_test6, &ftr_fixup_test6_expected, size) == 0); +} + +static void test_cpu_macros(void) +{ + extern void ftr_fixup_test_FTR_macros; + extern void ftr_fixup_test_FTR_macros_expected; + unsigned long size = &ftr_fixup_test_FTR_macros_expected - + &ftr_fixup_test_FTR_macros; + + /* The fixups have already been done for us during boot */ + check(memcmp(&ftr_fixup_test_FTR_macros, + &ftr_fixup_test_FTR_macros_expected, size) == 0); +} + +static void test_fw_macros(void) +{ +#ifdef CONFIG_PPC64 + extern void ftr_fixup_test_FW_FTR_macros; + extern void ftr_fixup_test_FW_FTR_macros_expected; + unsigned long size = &ftr_fixup_test_FW_FTR_macros_expected - + &ftr_fixup_test_FW_FTR_macros; + + /* The fixups have already been done for us during boot */ + check(memcmp(&ftr_fixup_test_FW_FTR_macros, + &ftr_fixup_test_FW_FTR_macros_expected, size) == 0); +#endif +} + +static int __init test_feature_fixups(void) +{ + printk(KERN_DEBUG "Running feature fixup self-tests ...\n"); + + test_basic_patching(); + test_alternative_patching(); + test_alternative_case_too_big(); + test_alternative_case_too_small(); + test_alternative_case_with_branch(); + test_alternative_case_with_external_branch(); + test_cpu_macros(); + test_fw_macros(); + + return 0; +} +late_initcall(test_feature_fixups); + +#endif /* CONFIG_FTR_FIXUP_SELFTEST */ -- cgit v1.2.3 From c230328def963373ec474056f372e1918692c3c8 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 24 Jun 2008 11:33:05 +1000 Subject: powerpc: Use an alternative feature section in entry_64.S Use an alternative feature section in _switch. There are three cases handled here, either we don't have an SLB, in which case we jump over the entire code section, or if we do we either do or don't have 1TB segments. Boot tested on Power3, Power5 and Power5+. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/entry_64.S | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index c0db5b769e55..6ca3044e2e32 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -383,16 +383,16 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) ld r8,KSP(r4) /* new stack pointer */ BEGIN_FTR_SECTION - b 2f -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) -BEGIN_FTR_SECTION + BEGIN_FTR_SECTION_NESTED(95) clrrdi r6,r8,28 /* get its ESID */ clrrdi r9,r1,28 /* get current sp ESID */ -END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT) -BEGIN_FTR_SECTION + FTR_SECTION_ELSE_NESTED(95) clrrdi r6,r8,40 /* get its 1T ESID */ clrrdi r9,r1,40 /* get current sp 1T ESID */ -END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT) + ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_1T_SEGMENT, 95) +FTR_SECTION_ELSE + b 2f +ALT_FTR_SECTION_END_IFSET(CPU_FTR_SLB) clrldi. r0,r6,2 /* is new ESID c00000000? */ cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */ cror eq,4*cr1+eq,eq -- cgit v1.2.3 From 9b09c6d909dfd8de96b99b9b9c808b94b0a71614 Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Tue, 24 Jun 2008 14:20:29 +1000 Subject: powerpc: Change the default link address for pSeries zImage kernels Currently we set the start of the .text section to be 4Mb for pSeries. In situations where the zImage is > 8Mb we'll fail to boot (due to overlapping with OF). Move .text in a zImage from 4MB to 64MB (well past OF). We still will not be able to load large zImage unless we also move OF, to that end, add a note to the zImage ELF to move OF to 32Mb. If this is the very first kernel booted then we'll need to move OF manually by setting real-base. Signed-off-by: Tony Breeds Signed-off-by: Paul Mackerras --- arch/powerpc/boot/addnote.c | 2 +- arch/powerpc/boot/oflib.c | 15 +++++++++++++-- arch/powerpc/boot/wrapper | 14 ++++++++++++-- arch/powerpc/boot/zImage.coff.lds.S | 1 - arch/powerpc/boot/zImage.lds.S | 1 - 5 files changed, 26 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c index 8041a9845ab7..b1e5611b2ab1 100644 --- a/arch/powerpc/boot/addnote.c +++ b/arch/powerpc/boot/addnote.c @@ -25,7 +25,7 @@ char arch[] = "PowerPC"; #define N_DESCR 6 unsigned int descr[N_DESCR] = { 0xffffffff, /* real-mode = true */ - 0x00c00000, /* real-base, i.e. where we expect OF to be */ + 0x02000000, /* real-base, i.e. where we expect OF to be */ 0xffffffff, /* real-size */ 0xffffffff, /* virt-base */ 0xffffffff, /* virt-size */ diff --git a/arch/powerpc/boot/oflib.c b/arch/powerpc/boot/oflib.c index 95b8fd69a403..b0ec9cf3eaaf 100644 --- a/arch/powerpc/boot/oflib.c +++ b/arch/powerpc/boot/oflib.c @@ -168,8 +168,19 @@ void *of_claim(unsigned long virt, unsigned long size, unsigned long align) void *of_vmlinux_alloc(unsigned long size) { - void *p = malloc(size); - + unsigned long start = (unsigned long)_start, end = (unsigned long)_end; + void *addr; + void *p; + + /* With some older POWER4 firmware we need to claim the area the kernel + * will reside in. Newer firmwares don't need this so we just ignore + * the return value. + */ + addr = of_claim(start, end - start, 0); + printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %p\r\n", + start, end, end - start, addr); + + p = malloc(size); if (!p) fatal("Can't allocate memory for kernel image!\n\r"); diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index cb87a015be7c..df2358e9f1ca 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -138,14 +138,20 @@ objflags=-S tmp=$tmpdir/zImage.$$.o ksection=.kernel:vmlinux.strip isection=.kernel:initrd +link_address='0x400000' case "$platform" in -pmac|pseries|chrp) +pseries) + platformo=$object/of.o + link_address='0x4000000' + ;; +pmac|chrp) platformo=$object/of.o ;; coff) platformo=$object/of.o lds=$object/zImage.coff.lds + link_address='0x500000' ;; miboot|uboot) # miboot and U-boot want just the bare bits, not an ELF binary @@ -190,6 +196,7 @@ ps3) objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data" ksection=.kernel:vmlinux.bin isection=.kernel:initrd + link_address='' ;; ep88xc|ep405|ep8248e) platformo="$object/fixed-head.o $object/$platform.o" @@ -272,7 +279,10 @@ if [ -n "$dtb" ]; then fi if [ "$platform" != "miboot" ]; then - ${CROSS}ld -m elf32ppc -T $lds -o "$ofile" \ + if [ -n "$link_address" ] ; then + text_start="-Ttext $link_address --defsym _start=$link_address" + fi + ${CROSS}ld -m elf32ppc -T $lds $text_start -o "$ofile" \ $platformo $tmp $object/wrapper.a rm $tmp fi diff --git a/arch/powerpc/boot/zImage.coff.lds.S b/arch/powerpc/boot/zImage.coff.lds.S index fe87a90ce7f1..856dc78b14ef 100644 --- a/arch/powerpc/boot/zImage.coff.lds.S +++ b/arch/powerpc/boot/zImage.coff.lds.S @@ -3,7 +3,6 @@ ENTRY(_zimage_start_opd) EXTERN(_zimage_start_opd) SECTIONS { - . = (5*1024*1024); _start = .; .text : { diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S index f6e380fdb388..0962d62bdb50 100644 --- a/arch/powerpc/boot/zImage.lds.S +++ b/arch/powerpc/boot/zImage.lds.S @@ -3,7 +3,6 @@ ENTRY(_zimage_start) EXTERN(_zimage_start) SECTIONS { - . = (4*1024*1024); _start = .; .text : { -- cgit v1.2.3 From 9e7511861c4f8d35852a3721c5bcd92661cb4c9f Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 25 Jun 2008 14:07:17 +1000 Subject: powerpc: Fix MSR setting in 32 bit signal code If we set the SPE MSR bit in save_user_regs we can blow away the VEC bit. This doesn't matter in reality as they are in fact the same bit but looks bad. Also, when we add VSX in a later patch, we need to be able to set two separate MSR bits here. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/signal_32.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 4ae16d179803..b057e6852a7d 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -336,6 +336,8 @@ struct rt_sigframe { static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, int sigret) { + unsigned long msr = regs->msr; + /* Make sure floating point registers are stored in regs */ flush_fp_to_thread(current); @@ -354,8 +356,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, return 1; /* set MSR_VEC in the saved MSR value to indicate that frame->mc_vregs contains valid data */ - if (__put_user(regs->msr | MSR_VEC, &frame->mc_gregs[PT_MSR])) - return 1; + msr |= MSR_VEC; } /* else assert((regs->msr & MSR_VEC) == 0) */ @@ -377,8 +378,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, return 1; /* set MSR_SPE in the saved MSR value to indicate that frame->mc_vregs contains valid data */ - if (__put_user(regs->msr | MSR_SPE, &frame->mc_gregs[PT_MSR])) - return 1; + msr |= MSR_SPE; } /* else assert((regs->msr & MSR_SPE) == 0) */ @@ -387,6 +387,8 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, return 1; #endif /* CONFIG_SPE */ + if (__put_user(msr, &frame->mc_gregs[PT_MSR])) + return 1; if (sigret) { /* Set up the sigreturn trampoline: li r0,sigret; sc */ if (__put_user(0x38000000UL + sigret, &frame->tramp[0]) -- cgit v1.2.3 From 9c75a31c3525a127f70b919856e32be3d8b03755 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Thu, 26 Jun 2008 17:07:48 +1000 Subject: powerpc: Add macros to access floating point registers in thread_struct. We are going to change where the floating point registers are stored in the thread_struct, so in preparation add some macros to access the floating point registers. Update all code to use these new macros. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/align.c | 6 ++--- arch/powerpc/kernel/process.c | 2 +- arch/powerpc/kernel/ptrace.c | 10 ++++--- arch/powerpc/kernel/ptrace32.c | 14 +++++++--- arch/powerpc/kernel/softemu8xx.c | 4 +-- arch/powerpc/math-emu/math.c | 56 ++++++++++++++++++++-------------------- include/asm-powerpc/ppc_asm.h | 5 ++-- include/asm-powerpc/processor.h | 4 +++ 8 files changed, 58 insertions(+), 43 deletions(-) diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index e06f75daeba3..c95954c81454 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -366,7 +366,7 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, static int emulate_fp_pair(struct pt_regs *regs, unsigned char __user *addr, unsigned int reg, unsigned int flags) { - char *ptr = (char *) ¤t->thread.fpr[reg]; + char *ptr = (char *) ¤t->thread.TS_FPR(reg); int i, ret; if (!(flags & F)) @@ -784,7 +784,7 @@ int fix_alignment(struct pt_regs *regs) return -EFAULT; } } else if (flags & F) { - data.dd = current->thread.fpr[reg]; + data.dd = current->thread.TS_FPR(reg); if (flags & S) { /* Single-precision FP store requires conversion... */ #ifdef CONFIG_PPC_FPU @@ -862,7 +862,7 @@ int fix_alignment(struct pt_regs *regs) if (unlikely(ret)) return -EFAULT; } else if (flags & F) - current->thread.fpr[reg] = data.dd; + current->thread.TS_FPR(reg) = data.dd; else regs->gpr[reg] = data.ll; diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 7de41c3948ec..582df70439cb 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -110,7 +110,7 @@ int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs) return 0; flush_fp_to_thread(current); - memcpy(fpregs, &tsk->thread.fpr[0], sizeof(*fpregs)); + memcpy(fpregs, &tsk->thread.TS_FPR(0), sizeof(*fpregs)); return 1; } diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 2a9fe97e4521..59ff08704e94 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -218,7 +218,7 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset, flush_fp_to_thread(target); BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) != - offsetof(struct thread_struct, fpr[32])); + offsetof(struct thread_struct, TS_FPR(32))); return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &target->thread.fpr, 0, -1); @@ -231,7 +231,7 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset, flush_fp_to_thread(target); BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) != - offsetof(struct thread_struct, fpr[32])); + offsetof(struct thread_struct, TS_FPR(32))); return user_regset_copyin(&pos, &count, &kbuf, &ubuf, &target->thread.fpr, 0, -1); @@ -728,7 +728,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) tmp = ptrace_get_reg(child, (int) index); } else { flush_fp_to_thread(child); - tmp = ((unsigned long *)child->thread.fpr)[index - PT_FPR0]; + tmp = ((unsigned long *)child->thread.fpr) + [TS_FPRWIDTH * (index - PT_FPR0)]; } ret = put_user(tmp,(unsigned long __user *) data); break; @@ -755,7 +756,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) ret = ptrace_put_reg(child, index, data); } else { flush_fp_to_thread(child); - ((unsigned long *)child->thread.fpr)[index - PT_FPR0] = data; + ((unsigned long *)child->thread.fpr) + [TS_FPRWIDTH * (index - PT_FPR0)] = data; ret = 0; } break; diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c index 4c1de6af4c09..67bf1a1e7e14 100644 --- a/arch/powerpc/kernel/ptrace32.c +++ b/arch/powerpc/kernel/ptrace32.c @@ -64,6 +64,11 @@ static long compat_ptrace_old(struct task_struct *child, long request, return -EPERM; } +/* Macros to workout the correct index for the FPR in the thread struct */ +#define FPRNUMBER(i) (((i) - PT_FPR0) >> 1) +#define FPRHALF(i) (((i) - PT_FPR0) & 1) +#define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) + FPRHALF(i) + long compat_arch_ptrace(struct task_struct *child, compat_long_t request, compat_ulong_t caddr, compat_ulong_t cdata) { @@ -122,7 +127,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, * to be an array of unsigned int (32 bits) - the * index passed in is based on this assumption. */ - tmp = ((unsigned int *)child->thread.fpr)[index - PT_FPR0]; + tmp = ((unsigned int *)child->thread.fpr) + [FPRINDEX(index)]; } ret = put_user((unsigned int)tmp, (u32 __user *)data); break; @@ -162,7 +168,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, CHECK_FULL_REGS(child->thread.regs); if (numReg >= PT_FPR0) { flush_fp_to_thread(child); - tmp = ((unsigned long int *)child->thread.fpr)[numReg - PT_FPR0]; + tmp = ((unsigned long int *)child->thread.fpr) + [FPRINDEX(numReg)]; } else { /* register within PT_REGS struct */ tmp = ptrace_get_reg(child, numReg); } @@ -217,7 +224,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request, * to be an array of unsigned int (32 bits) - the * index passed in is based on this assumption. */ - ((unsigned int *)child->thread.fpr)[index - PT_FPR0] = data; + ((unsigned int *)child->thread.fpr) + [FPRINDEX(index)] = data; ret = 0; } break; diff --git a/arch/powerpc/kernel/softemu8xx.c b/arch/powerpc/kernel/softemu8xx.c index 67d6f6890edc..c906c4bf6835 100644 --- a/arch/powerpc/kernel/softemu8xx.c +++ b/arch/powerpc/kernel/softemu8xx.c @@ -124,7 +124,7 @@ int Soft_emulate_8xx(struct pt_regs *regs) disp = instword & 0xffff; ea = (u32 *)(regs->gpr[idxreg] + disp); - ip = (u32 *)¤t->thread.fpr[flreg]; + ip = (u32 *)¤t->thread.TS_FPR(flreg); switch ( inst ) { @@ -168,7 +168,7 @@ int Soft_emulate_8xx(struct pt_regs *regs) break; case FMR: /* assume this is a fp move -- Cort */ - memcpy(ip, ¤t->thread.fpr[(instword>>11)&0x1f], + memcpy(ip, ¤t->thread.TS_FPR((instword>>11)&0x1f), sizeof(double)); break; default: diff --git a/arch/powerpc/math-emu/math.c b/arch/powerpc/math-emu/math.c index 381306bb1590..29e545e0272e 100644 --- a/arch/powerpc/math-emu/math.c +++ b/arch/powerpc/math-emu/math.c @@ -230,14 +230,14 @@ do_mathemu(struct pt_regs *regs) case LFD: idx = (insn >> 16) & 0x1f; sdisp = (insn & 0xffff); - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp); lfd(op0, op1, op2, op3); break; case LFDU: idx = (insn >> 16) & 0x1f; sdisp = (insn & 0xffff); - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp); lfd(op0, op1, op2, op3); regs->gpr[idx] = (unsigned long)op1; @@ -245,21 +245,21 @@ do_mathemu(struct pt_regs *regs) case STFD: idx = (insn >> 16) & 0x1f; sdisp = (insn & 0xffff); - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp); stfd(op0, op1, op2, op3); break; case STFDU: idx = (insn >> 16) & 0x1f; sdisp = (insn & 0xffff); - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp); stfd(op0, op1, op2, op3); regs->gpr[idx] = (unsigned long)op1; break; case OP63: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)¤t->thread.fpr[(insn >> 11) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); + op1 = (void *)¤t->thread.TS_FPR((insn >> 11) & 0x1f); fmr(op0, op1, op2, op3); break; default: @@ -356,28 +356,28 @@ do_mathemu(struct pt_regs *regs) switch (type) { case AB: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)¤t->thread.fpr[(insn >> 16) & 0x1f]; - op2 = (void *)¤t->thread.fpr[(insn >> 11) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); + op1 = (void *)¤t->thread.TS_FPR((insn >> 16) & 0x1f); + op2 = (void *)¤t->thread.TS_FPR((insn >> 11) & 0x1f); break; case AC: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)¤t->thread.fpr[(insn >> 16) & 0x1f]; - op2 = (void *)¤t->thread.fpr[(insn >> 6) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); + op1 = (void *)¤t->thread.TS_FPR((insn >> 16) & 0x1f); + op2 = (void *)¤t->thread.TS_FPR((insn >> 6) & 0x1f); break; case ABC: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)¤t->thread.fpr[(insn >> 16) & 0x1f]; - op2 = (void *)¤t->thread.fpr[(insn >> 11) & 0x1f]; - op3 = (void *)¤t->thread.fpr[(insn >> 6) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); + op1 = (void *)¤t->thread.TS_FPR((insn >> 16) & 0x1f); + op2 = (void *)¤t->thread.TS_FPR((insn >> 11) & 0x1f); + op3 = (void *)¤t->thread.TS_FPR((insn >> 6) & 0x1f); break; case D: idx = (insn >> 16) & 0x1f; sdisp = (insn & 0xffff); - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp); break; @@ -387,27 +387,27 @@ do_mathemu(struct pt_regs *regs) goto illegal; sdisp = (insn & 0xffff); - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); op1 = (void *)(regs->gpr[idx] + sdisp); break; case X: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); break; case XA: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)¤t->thread.fpr[(insn >> 16) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); + op1 = (void *)¤t->thread.TS_FPR((insn >> 16) & 0x1f); break; case XB: - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; - op1 = (void *)¤t->thread.fpr[(insn >> 11) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); + op1 = (void *)¤t->thread.TS_FPR((insn >> 11) & 0x1f); break; case XE: idx = (insn >> 16) & 0x1f; - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); if (!idx) { if (((insn >> 1) & 0x3ff) == STFIWX) op1 = (void *)(regs->gpr[(insn >> 11) & 0x1f]); @@ -421,7 +421,7 @@ do_mathemu(struct pt_regs *regs) case XEU: idx = (insn >> 16) & 0x1f; - op0 = (void *)¤t->thread.fpr[(insn >> 21) & 0x1f]; + op0 = (void *)¤t->thread.TS_FPR((insn >> 21) & 0x1f); op1 = (void *)((idx ? regs->gpr[idx] : 0) + regs->gpr[(insn >> 11) & 0x1f]); break; @@ -429,8 +429,8 @@ do_mathemu(struct pt_regs *regs) case XCR: op0 = (void *)®s->ccr; op1 = (void *)((insn >> 23) & 0x7); - op2 = (void *)¤t->thread.fpr[(insn >> 16) & 0x1f]; - op3 = (void *)¤t->thread.fpr[(insn >> 11) & 0x1f]; + op2 = (void *)¤t->thread.TS_FPR((insn >> 16) & 0x1f); + op3 = (void *)¤t->thread.TS_FPR((insn >> 11) & 0x1f); break; case XCRL: @@ -450,7 +450,7 @@ do_mathemu(struct pt_regs *regs) case XFLB: op0 = (void *)((insn >> 17) & 0xff); - op1 = (void *)¤t->thread.fpr[(insn >> 11) & 0x1f]; + op1 = (void *)¤t->thread.TS_FPR((insn >> 11) & 0x1f); break; default: diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h index ef96bfd4ef4c..8f0426f973c9 100644 --- a/include/asm-powerpc/ppc_asm.h +++ b/include/asm-powerpc/ppc_asm.h @@ -6,6 +6,7 @@ #include #include +#include #ifndef __ASSEMBLY__ #error __FILE__ should only be used in assembler files @@ -83,13 +84,13 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ #define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base) #define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base) -#define SAVE_FPR(n, base) stfd n,THREAD_FPR0+8*(n)(base) +#define SAVE_FPR(n, base) stfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base) #define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base) #define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base) #define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base) #define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base) #define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base) -#define REST_FPR(n, base) lfd n,THREAD_FPR0+8*(n)(base) +#define REST_FPR(n, base) lfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base) #define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base) #define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base) #define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base) diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h index a1deed85f31d..a23da6356e06 100644 --- a/include/asm-powerpc/processor.h +++ b/include/asm-powerpc/processor.h @@ -12,6 +12,8 @@ #include +#define TS_FPRWIDTH 1 + #ifndef __ASSEMBLY__ #include #include @@ -140,6 +142,8 @@ typedef struct { unsigned long seg; } mm_segment_t; +#define TS_FPR(i) fpr[i] + struct thread_struct { unsigned long ksp; /* Kernel stack pointer */ unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ -- cgit v1.2.3 From 10e343925ab5d9f6c651ad808f2e413e3cc053b3 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 25 Jun 2008 14:07:18 +1000 Subject: powerpc: Move altivec_unavailable Move the altivec_unavailable code, to make room at 0xf40 where the vsx_unavailable exception will be. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/head_64.S | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 25e84c0e1166..dd9e6595cae5 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -275,7 +275,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) . = 0xf00 b performance_monitor_pSeries - STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable) + . = 0xf20 + b altivec_unavailable_pSeries #ifdef CONFIG_CBE_RAS HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error) @@ -295,6 +296,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) /* moved from 0xf00 */ STD_EXCEPTION_PSERIES(., performance_monitor) + STD_EXCEPTION_PSERIES(., altivec_unavailable) /* * An interrupt came in while soft-disabled; clear EE in SRR1, -- cgit v1.2.3 From 6f3d8e6947ec98e358514fc0f7b2e37fe88a21bb Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 25 Jun 2008 14:07:18 +1000 Subject: powerpc: Make load_up_fpu and load_up_altivec callable Make load_up_fpu and load_up_altivec callable so they can be reused by the VSX code. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/fpu.S | 2 +- arch/powerpc/kernel/head_32.S | 6 ++++-- arch/powerpc/kernel/head_64.S | 10 +++++++--- arch/powerpc/kernel/head_booke.h | 6 ++++-- 4 files changed, 16 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 821e152e093c..8a2b3d62b9b8 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -85,7 +85,7 @@ _GLOBAL(load_up_fpu) #endif /* CONFIG_SMP */ /* restore registers and return */ /* we haven't used ctr or xer or lr */ - b fast_exception_return + blr /* * giveup_fpu(tsk) diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 785af9b56591..99ee2f0f0f2b 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -421,8 +421,10 @@ BEGIN_FTR_SECTION b ProgramCheck END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE) EXCEPTION_PROLOG - bne load_up_fpu /* if from user, just load it up */ - addi r3,r1,STACK_FRAME_OVERHEAD + beq 1f + bl load_up_fpu /* if from user, just load it up */ + b fast_exception_return +1: addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception) /* Decrementer */ diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index dd9e6595cae5..64433731d995 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -741,7 +741,8 @@ fp_unavailable_common: ENABLE_INTS bl .kernel_fp_unavailable_exception BUG_OPCODE -1: b .load_up_fpu +1: bl .load_up_fpu + b fast_exception_return .align 7 .globl altivec_unavailable_common @@ -749,7 +750,10 @@ altivec_unavailable_common: EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN) #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION - bne .load_up_altivec /* if from user, just load it up */ + beq 1f + bl .load_up_altivec + b fast_exception_return +1: END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif bl .save_nvgprs @@ -829,7 +833,7 @@ _STATIC(load_up_altivec) std r4,0(r3) #endif /* CONFIG_SMP */ /* restore registers and return */ - b fast_exception_return + blr #endif /* CONFIG_ALTIVEC */ /* diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index 505494f1ee7c..b0461be1c928 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -376,8 +376,10 @@ label: #define FP_UNAVAILABLE_EXCEPTION \ START_EXCEPTION(FloatingPointUnavailable) \ NORMAL_EXCEPTION_PROLOG; \ - bne load_up_fpu; /* if from user, just load it up */ \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ + beq 1f; \ + bl load_up_fpu; /* if from user, just load it up */ \ + b fast_exception_return; \ +1: addi r3,r1,STACK_FRAME_OVERHEAD; \ EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception) #ifndef __ASSEMBLY__ -- cgit v1.2.3 From c6e6771b87d4e339d27f1383c8a808ae9b4ee5b8 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 25 Jun 2008 14:07:18 +1000 Subject: powerpc: Introduce VSX thread_struct and CONFIG_VSX The layout of the new VSR registers and how they overlap on top of the legacy FPR and VR registers is: VSR doubleword 0 VSR doubleword 1 ---------------------------------------------------------------- VSR[0] | FPR[0] | | ---------------------------------------------------------------- VSR[1] | FPR[1] | | ---------------------------------------------------------------- | ... | | | ... | | ---------------------------------------------------------------- VSR[30] | FPR[30] | | ---------------------------------------------------------------- VSR[31] | FPR[31] | | ---------------------------------------------------------------- VSR[32] | VR[0] | ---------------------------------------------------------------- VSR[33] | VR[1] | ---------------------------------------------------------------- | ... | | ... | ---------------------------------------------------------------- VSR[62] | VR[30] | ---------------------------------------------------------------- VSR[63] | VR[31] | ---------------------------------------------------------------- VSX has 64 128bit registers. The first 32 regs overlap with the FP registers and hence extend them with and additional 64 bits. The second 32 regs overlap with the VMX registers. This commit introduces the thread_struct changes required to reflect this register layout. Ptrace and signals code is updated so that the floating point registers are correctly accessed from the thread_struct when CONFIG_VSX is enabled. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/asm-offsets.c | 4 +++ arch/powerpc/kernel/ptrace.c | 29 ++++++++++++++++++- arch/powerpc/kernel/signal_32.c | 59 +++++++++++++++++++++++++++++---------- arch/powerpc/kernel/signal_64.c | 32 +++++++++++++++++++-- include/asm-powerpc/processor.h | 18 ++++++++++-- 5 files changed, 121 insertions(+), 21 deletions(-) diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 8655c7670350..92768d3006f7 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -78,6 +78,10 @@ int main(void) DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr)); DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr)); #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX + DEFINE(THREAD_VSR0, offsetof(struct thread_struct, fpr)); + DEFINE(THREAD_USED_VSR, offsetof(struct thread_struct, used_vsr)); +#endif /* CONFIG_VSX */ #ifdef CONFIG_PPC64 DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid)); #else /* CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 59ff08704e94..70fbde84b83f 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -215,29 +215,56 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset, unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf) { +#ifdef CONFIG_VSX + double buf[33]; + int i; +#endif flush_fp_to_thread(target); +#ifdef CONFIG_VSX + /* copy to local buffer then write that out */ + for (i = 0; i < 32 ; i++) + buf[i] = target->thread.TS_FPR(i); + memcpy(&buf[32], &target->thread.fpscr, sizeof(double)); + return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1); + +#else BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) != offsetof(struct thread_struct, TS_FPR(32))); return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &target->thread.fpr, 0, -1); +#endif } static int fpr_set(struct task_struct *target, const struct user_regset *regset, unsigned int pos, unsigned int count, const void *kbuf, const void __user *ubuf) { +#ifdef CONFIG_VSX + double buf[33]; + int i; +#endif flush_fp_to_thread(target); +#ifdef CONFIG_VSX + /* copy to local buffer then write that out */ + i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1); + if (i) + return i; + for (i = 0; i < 32 ; i++) + target->thread.TS_FPR(i) = buf[i]; + memcpy(&target->thread.fpscr, &buf[32], sizeof(double)); + return 0; +#else BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) != offsetof(struct thread_struct, TS_FPR(32))); return user_regset_copyin(&pos, &count, &kbuf, &ubuf, &target->thread.fpr, 0, -1); +#endif } - #ifdef CONFIG_ALTIVEC /* * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go. diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index b057e6852a7d..f7fa395b9fb5 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -337,14 +337,16 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, int sigret) { unsigned long msr = regs->msr; +#ifdef CONFIG_VSX + double buf[32]; + int i; +#endif /* Make sure floating point registers are stored in regs */ flush_fp_to_thread(current); - /* save general and floating-point registers */ - if (save_general_regs(regs, frame) || - __copy_to_user(&frame->mc_fregs, current->thread.fpr, - ELF_NFPREG * sizeof(double))) + /* save general registers */ + if (save_general_regs(regs, frame)) return 1; #ifdef CONFIG_ALTIVEC @@ -368,7 +370,20 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32])) return 1; #endif /* CONFIG_ALTIVEC */ - +#ifdef CONFIG_VSX + /* save FPR copy to local buffer then write to the thread_struct */ + flush_fp_to_thread(current); + for (i = 0; i < 32 ; i++) + buf[i] = current->thread.TS_FPR(i); + memcpy(&buf[i], ¤t->thread.fpscr, sizeof(double)); + if (__copy_to_user(&frame->mc_fregs, buf, ELF_NFPREG * sizeof(double))) + return 1; +#else + /* save floating-point registers */ + if (__copy_to_user(&frame->mc_fregs, current->thread.fpr, + ELF_NFPREG * sizeof(double))) + return 1; +#endif /* CONFIG_VSX */ #ifdef CONFIG_SPE /* save spe registers */ if (current->thread.used_spe) { @@ -411,6 +426,10 @@ static long restore_user_regs(struct pt_regs *regs, long err; unsigned int save_r2 = 0; unsigned long msr; +#ifdef CONFIG_VSX + double buf[32]; + int i; +#endif /* * restore general registers but not including MSR or SOFTE. Also @@ -438,16 +457,11 @@ static long restore_user_regs(struct pt_regs *regs, */ discard_lazy_cpu_state(); - /* force the process to reload the FP registers from - current->thread when it next does FP instructions */ - regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1); - if (__copy_from_user(current->thread.fpr, &sr->mc_fregs, - sizeof(sr->mc_fregs))) - return 1; - #ifdef CONFIG_ALTIVEC - /* force the process to reload the altivec registers from - current->thread when it next does altivec instructions */ + /* + * Force the process to reload the altivec registers from + * current->thread when it next does altivec instructions + */ regs->msr &= ~MSR_VEC; if (msr & MSR_VEC) { /* restore altivec registers from the stack */ @@ -462,6 +476,23 @@ static long restore_user_regs(struct pt_regs *regs, return 1; #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX + if (__copy_from_user(buf, &sr->mc_fregs,sizeof(sr->mc_fregs))) + return 1; + for (i = 0; i < 32 ; i++) + current->thread.TS_FPR(i) = buf[i]; + memcpy(¤t->thread.fpscr, &buf[i], sizeof(double)); +#else + if (__copy_from_user(current->thread.fpr, &sr->mc_fregs, + sizeof(sr->mc_fregs))) + return 1; +#endif /* CONFIG_VSX */ + /* + * force the process to reload the FP registers from + * current->thread when it next does FP instructions + */ + regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1); + #ifdef CONFIG_SPE /* force the process to reload the spe registers from current->thread when it next does spe instructions */ diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index da7c058e3731..a587b33cd6b9 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -89,6 +89,10 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, #endif unsigned long msr = regs->msr; long err = 0; +#ifdef CONFIG_VSX + double buf[FP_REGS_SIZE]; + int i; +#endif flush_fp_to_thread(current); @@ -112,11 +116,21 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, #else /* CONFIG_ALTIVEC */ err |= __put_user(0, &sc->v_regs); #endif /* CONFIG_ALTIVEC */ + flush_fp_to_thread(current); +#ifdef CONFIG_VSX + /* Copy FP to local buffer then write that out */ + for (i = 0; i < 32 ; i++) + buf[i] = current->thread.TS_FPR(i); + memcpy(&buf[i], ¤t->thread.fpscr, sizeof(double)); + err |= __copy_to_user(&sc->fp_regs, buf, FP_REGS_SIZE); +#else /* CONFIG_VSX */ + /* copy fpr regs and fpscr */ + err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE); +#endif /* CONFIG_VSX */ err |= __put_user(&sc->gp_regs, &sc->regs); WARN_ON(!FULL_REGS(regs)); err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE); err |= __put_user(msr, &sc->gp_regs[PT_MSR]); - err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE); err |= __put_user(signr, &sc->signal); err |= __put_user(handler, &sc->handler); if (set != NULL) @@ -134,6 +148,9 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, { #ifdef CONFIG_ALTIVEC elf_vrreg_t __user *v_regs; +#endif +#ifdef CONFIG_VSX + double buf[FP_REGS_SIZE]; #endif unsigned long err = 0; unsigned long save_r13 = 0; @@ -182,8 +199,6 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, */ regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC); - err |= __copy_from_user(¤t->thread.fpr, &sc->fp_regs, FP_REGS_SIZE); - #ifdef CONFIG_ALTIVEC err |= __get_user(v_regs, &sc->v_regs); if (err) @@ -202,7 +217,18 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, else current->thread.vrsave = 0; #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX + /* restore floating point */ + err |= __copy_from_user(buf, &sc->fp_regs, FP_REGS_SIZE); + if (err) + return err; + for (i = 0; i < 32 ; i++) + current->thread.TS_FPR(i) = buf[i]; + memcpy(¤t->thread.fpscr, &buf[i], sizeof(double)); +#else + err |= __copy_from_user(¤t->thread.fpr, &sc->fp_regs, FP_REGS_SIZE); +#endif return err; } diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h index a23da6356e06..e93e72df4bca 100644 --- a/include/asm-powerpc/processor.h +++ b/include/asm-powerpc/processor.h @@ -12,7 +12,11 @@ #include +#ifdef CONFIG_VSX +#define TS_FPRWIDTH 2 +#else #define TS_FPRWIDTH 1 +#endif #ifndef __ASSEMBLY__ #include @@ -80,6 +84,7 @@ extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); /* Lazy FPU handling on uni-processor */ extern struct task_struct *last_task_used_math; extern struct task_struct *last_task_used_altivec; +extern struct task_struct *last_task_used_vsx; extern struct task_struct *last_task_used_spe; #ifdef CONFIG_PPC32 @@ -142,7 +147,9 @@ typedef struct { unsigned long seg; } mm_segment_t; -#define TS_FPR(i) fpr[i] +#define TS_FPROFFSET 0 +#define TS_VSRLOWOFFSET 1 +#define TS_FPR(i) fpr[i][TS_FPROFFSET] struct thread_struct { unsigned long ksp; /* Kernel stack pointer */ @@ -160,8 +167,9 @@ struct thread_struct { unsigned long dbcr0; /* debug control register values */ unsigned long dbcr1; #endif - double fpr[32]; /* Complete floating point set */ - struct { /* fpr ... fpscr must be contiguous */ + /* FP and VSX 0-31 register set */ + double fpr[32][TS_FPRWIDTH]; + struct { unsigned int pad; unsigned int val; /* Floating point status */ @@ -181,6 +189,10 @@ struct thread_struct { unsigned long vrsave; int used_vr; /* set if process has used altivec */ #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX + /* VSR status */ + int used_vsr; /* set if process has used altivec */ +#endif /* CONFIG_VSX */ #ifdef CONFIG_SPE unsigned long evr[32]; /* upper 32-bits of SPE regs */ u64 acc; /* Accumulator */ -- cgit v1.2.3 From b962ce9d26fd6677e6720949642420ceb029a102 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 25 Jun 2008 14:07:18 +1000 Subject: powerpc: Add VSX CPU feature Add a VSX CPU feature. Also add code to detect if VSX is available from the device tree. Signed-off-by: Michael Neuling Signed-off-by: Joel Schopp Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom.c | 4 ++++ include/asm-powerpc/cputable.h | 15 ++++++++++++++- 2 files changed, 18 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 2aefe2a4129a..87d83c56b31e 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -609,6 +609,10 @@ static struct feature_property { {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC}, {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC}, #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX + /* Yes, this _really_ is ibm,vmx == 2 to enable VSX */ + {"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX}, +#endif /* CONFIG_VSX */ #ifdef CONFIG_PPC64 {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP}, {"ibm,purr", 1, CPU_FTR_PURR, 0}, diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 0d96b0284a73..4e4491cb9d3b 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -25,6 +25,7 @@ #define PPC_FEATURE_HAS_DFP 0x00000400 #define PPC_FEATURE_POWER6_EXT 0x00000200 #define PPC_FEATURE_ARCH_2_06 0x00000100 +#define PPC_FEATURE_HAS_VSX 0x00000080 #define PPC_FEATURE_TRUE_LE 0x00000002 #define PPC_FEATURE_PPC_LE 0x00000001 @@ -183,6 +184,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000) #define CPU_FTR_1T_SEGMENT LONG_ASM_CONST(0x0004000000000000) #define CPU_FTR_NO_SLBIE_B LONG_ASM_CONST(0x0008000000000000) +#define CPU_FTR_VSX LONG_ASM_CONST(0x0010000000000000) #ifndef __ASSEMBLY__ @@ -201,6 +203,17 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define PPC_FEATURE_HAS_ALTIVEC_COMP 0 #endif +/* We only set the VSX features if the kernel was compiled with VSX + * support + */ +#ifdef CONFIG_VSX +#define CPU_FTR_VSX_COMP CPU_FTR_VSX +#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX +#else +#define CPU_FTR_VSX_COMP 0 +#define PPC_FEATURE_HAS_VSX_COMP 0 +#endif + /* We only set the spe features if the kernel was compiled with spe * support */ @@ -404,7 +417,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \ CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \ CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \ - CPU_FTR_1T_SEGMENT) + CPU_FTR_1T_SEGMENT | CPU_FTR_VSX) #else enum { CPU_FTRS_POSSIBLE = -- cgit v1.2.3 From 72ffff5b1792b0fa4d40a8e2f3276fff999820ec Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 25 Jun 2008 14:07:18 +1000 Subject: powerpc: Add VSX assembler code macros This adds the macros for the VSX load/store instruction as most binutils are not going to support this for a while. Also add VSX register save/restore macros and vsr[0-63] register definitions. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/fpu.S | 23 ++++++++++ include/asm-powerpc/ppc_asm.h | 103 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 126 insertions(+) diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 8a2b3d62b9b8..15247fe171a8 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -24,6 +24,29 @@ #include #include +#ifdef CONFIG_VSX +#define REST_32FPVSRS(n,c,base) \ +BEGIN_FTR_SECTION \ + b 2f; \ +END_FTR_SECTION_IFSET(CPU_FTR_VSX); \ + REST_32FPRS(n,base); \ + b 3f; \ +2: REST_32VSRS(n,c,base); \ +3: + +#define SAVE_32FPVSRS(n,c,base) \ +BEGIN_FTR_SECTION \ + b 2f; \ +END_FTR_SECTION_IFSET(CPU_FTR_VSX); \ + SAVE_32FPRS(n,base); \ + b 3f; \ +2: SAVE_32VSRS(n,c,base); \ +3: +#else +#define REST_32FPVSRS(n,b,base) REST_32FPRS(n, base) +#define SAVE_32FPVSRS(n,b,base) SAVE_32FPRS(n, base) +#endif + /* * This task wants to use the FPU now. * On UP, disable FP for the task which had the FPU previously, diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h index 8f0426f973c9..0966899d974b 100644 --- a/include/asm-powerpc/ppc_asm.h +++ b/include/asm-powerpc/ppc_asm.h @@ -74,6 +74,15 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ REST_10GPRS(22, base) #endif +/* + * Define what the VSX XX1 form instructions will look like, then add + * the 128 bit load store instructions based on that. + */ +#define VSX_XX1(xs, ra, rb) (((xs) & 0x1f) << 21 | ((ra) << 16) | \ + ((rb) << 11) | (((xs) >> 5))) + +#define STXVD2X(xs, ra, rb) .long (0x7c000798 | VSX_XX1((xs), (ra), (rb))) +#define LXVD2X(xs, ra, rb) .long (0x7c000698 | VSX_XX1((xs), (ra), (rb))) #define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base) #define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base) @@ -110,6 +119,33 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ #define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base) #define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) +/* Save the lower 32 VSRs in the thread VSR region */ +#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,b,base) +#define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base) +#define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base) +#define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base) +#define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base) +#define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base) +#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base) +#define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base) +#define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base) +#define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base) +#define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base) +#define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base) +/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */ +#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,b,base) +#define SAVE_2VSRSU(n,b,base) SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base) +#define SAVE_4VSRSU(n,b,base) SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base) +#define SAVE_8VSRSU(n,b,base) SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base) +#define SAVE_16VSRSU(n,b,base) SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base) +#define SAVE_32VSRSU(n,b,base) SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base) +#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base) +#define REST_2VSRSU(n,b,base) REST_VSRU(n,b,base); REST_VSRU(n+1,b,base) +#define REST_4VSRSU(n,b,base) REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base) +#define REST_8VSRSU(n,b,base) REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base) +#define REST_16VSRSU(n,b,base) REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base) +#define REST_32VSRSU(n,b,base) REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base) + #define SAVE_EVR(n,s,base) evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base) #define SAVE_2EVRS(n,s,base) SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base) #define SAVE_4EVRS(n,s,base) SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base) @@ -540,6 +576,73 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) #define vr30 30 #define vr31 31 +/* VSX Registers (VSRs) */ + +#define vsr0 0 +#define vsr1 1 +#define vsr2 2 +#define vsr3 3 +#define vsr4 4 +#define vsr5 5 +#define vsr6 6 +#define vsr7 7 +#define vsr8 8 +#define vsr9 9 +#define vsr10 10 +#define vsr11 11 +#define vsr12 12 +#define vsr13 13 +#define vsr14 14 +#define vsr15 15 +#define vsr16 16 +#define vsr17 17 +#define vsr18 18 +#define vsr19 19 +#define vsr20 20 +#define vsr21 21 +#define vsr22 22 +#define vsr23 23 +#define vsr24 24 +#define vsr25 25 +#define vsr26 26 +#define vsr27 27 +#define vsr28 28 +#define vsr29 29 +#define vsr30 30 +#define vsr31 31 +#define vsr32 32 +#define vsr33 33 +#define vsr34 34 +#define vsr35 35 +#define vsr36 36 +#define vsr37 37 +#define vsr38 38 +#define vsr39 39 +#define vsr40 40 +#define vsr41 41 +#define vsr42 42 +#define vsr43 43 +#define vsr44 44 +#define vsr45 45 +#define vsr46 46 +#define vsr47 47 +#define vsr48 48 +#define vsr49 49 +#define vsr50 50 +#define vsr51 51 +#define vsr52 52 +#define vsr53 53 +#define vsr54 54 +#define vsr55 55 +#define vsr56 56 +#define vsr57 57 +#define vsr58 58 +#define vsr59 59 +#define vsr60 60 +#define vsr61 61 +#define vsr62 62 +#define vsr63 63 + /* SPE Registers (EVPRs) */ #define evr0 0 -- cgit v1.2.3 From ce48b2100785e5ca629fb3aa8e3b50aca808f692 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 25 Jun 2008 14:07:18 +1000 Subject: powerpc: Add VSX context save/restore, ptrace and signal support This patch extends the floating point save and restore code to use the VSX load/stores when VSX is available. This will make FP context save/restore marginally slower on FP only code, when VSX is available, as it has to load/store 128bits rather than just 64bits. Mixing FP, VMX and VSX code will get constant architected state. The signals interface is extended to enable access to VSR 0-31 doubleword 1 after discussions with tool chain maintainers. Backward compatibility is maintained. The ptrace interface is also extended to allow access to VSR 0-31 full registers. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/entry_64.S | 5 ++ arch/powerpc/kernel/fpu.S | 16 ++++-- arch/powerpc/kernel/head_64.S | 65 ++++++++++++++++++++++++ arch/powerpc/kernel/misc_64.S | 33 ++++++++++++ arch/powerpc/kernel/ppc32.h | 1 + arch/powerpc/kernel/ppc_ksyms.c | 3 ++ arch/powerpc/kernel/process.c | 107 ++++++++++++++++++++++++++++++++++++++- arch/powerpc/kernel/ptrace.c | 70 +++++++++++++++++++++++++ arch/powerpc/kernel/signal_32.c | 33 ++++++++++++ arch/powerpc/kernel/signal_64.c | 31 +++++++++++- arch/powerpc/kernel/traps.c | 29 +++++++++++ include/asm-powerpc/elf.h | 6 ++- include/asm-powerpc/ptrace.h | 12 +++++ include/asm-powerpc/reg.h | 2 + include/asm-powerpc/sigcontext.h | 37 +++++++++++++- include/asm-powerpc/system.h | 9 ++++ 16 files changed, 451 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 6ca3044e2e32..12eb95a80ce9 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -353,6 +353,11 @@ _GLOBAL(_switch) mflr r20 /* Return to switch caller */ mfmsr r22 li r0, MSR_FP +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + oris r0,r0,MSR_VSX@h /* Disable VSX */ +END_FTR_SECTION_IFSET(CPU_FTR_VSX) +#endif /* CONFIG_VSX */ #ifdef CONFIG_ALTIVEC BEGIN_FTR_SECTION oris r0,r0,MSR_VEC@h /* Disable altivec */ diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 15247fe171a8..a088c064ae40 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -57,6 +57,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX); \ _GLOBAL(load_up_fpu) mfmsr r5 ori r5,r5,MSR_FP +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + oris r5,r5,MSR_VSX@h +END_FTR_SECTION_IFSET(CPU_FTR_VSX) +#endif SYNC MTMSRD(r5) /* enable use of fpu now */ isync @@ -73,7 +78,7 @@ _GLOBAL(load_up_fpu) beq 1f toreal(r4) addi r4,r4,THREAD /* want last_task_used_math->thread */ - SAVE_32FPRS(0, r4) + SAVE_32FPVSRS(0, r5, r4) mffs fr0 stfd fr0,THREAD_FPSCR(r4) PPC_LL r5,PT_REGS(r4) @@ -100,7 +105,7 @@ _GLOBAL(load_up_fpu) #endif lfd fr0,THREAD_FPSCR(r5) MTFSF_L(fr0) - REST_32FPRS(0, r5) + REST_32FPVSRS(0, r4, r5) #ifndef CONFIG_SMP subi r4,r5,THREAD fromreal(r4) @@ -119,6 +124,11 @@ _GLOBAL(load_up_fpu) _GLOBAL(giveup_fpu) mfmsr r5 ori r5,r5,MSR_FP +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + oris r5,r5,MSR_VSX@h +END_FTR_SECTION_IFSET(CPU_FTR_VSX) +#endif SYNC_601 ISYNC_601 MTMSRD(r5) /* enable use of fpu now */ @@ -129,7 +139,7 @@ _GLOBAL(giveup_fpu) addi r3,r3,THREAD /* want THREAD of task */ PPC_LL r5,PT_REGS(r3) PPC_LCMPI 0,r5,0 - SAVE_32FPRS(0, r3) + SAVE_32FPVSRS(0, r4 ,r3) mffs fr0 stfd fr0,THREAD_FPSCR(r3) beq 1f diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 64433731d995..ecced1eb03ae 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -278,6 +278,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) . = 0xf20 b altivec_unavailable_pSeries + . = 0xf40 + b vsx_unavailable_pSeries + #ifdef CONFIG_CBE_RAS HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error) #endif /* CONFIG_CBE_RAS */ @@ -297,6 +300,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) /* moved from 0xf00 */ STD_EXCEPTION_PSERIES(., performance_monitor) STD_EXCEPTION_PSERIES(., altivec_unavailable) + STD_EXCEPTION_PSERIES(., vsx_unavailable) /* * An interrupt came in while soft-disabled; clear EE in SRR1, @@ -836,6 +840,67 @@ _STATIC(load_up_altivec) blr #endif /* CONFIG_ALTIVEC */ + .align 7 + .globl vsx_unavailable_common +vsx_unavailable_common: + EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN) +#ifdef CONFIG_VSX +BEGIN_FTR_SECTION + bne .load_up_vsx +1: +END_FTR_SECTION_IFSET(CPU_FTR_VSX) +#endif + bl .save_nvgprs + addi r3,r1,STACK_FRAME_OVERHEAD + ENABLE_INTS + bl .vsx_unavailable_exception + b .ret_from_except + +#ifdef CONFIG_VSX +/* + * load_up_vsx(unused, unused, tsk) + * Disable VSX for the task which had it previously, + * and save its vector registers in its thread_struct. + * Reuse the fp and vsx saves, but first check to see if they have + * been saved already. + * On entry: r13 == 'current' && last_task_used_vsx != 'current' + */ +_STATIC(load_up_vsx) +/* Load FP and VSX registers if they haven't been done yet */ + andi. r5,r12,MSR_FP + beql+ load_up_fpu /* skip if already loaded */ + andis. r5,r12,MSR_VEC@h + beql+ load_up_altivec /* skip if already loaded */ + +#ifndef CONFIG_SMP + ld r3,last_task_used_vsx@got(r2) + ld r4,0(r3) + cmpdi 0,r4,0 + beq 1f + /* Disable VSX for last_task_used_vsx */ + addi r4,r4,THREAD + ld r5,PT_REGS(r4) + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + lis r6,MSR_VSX@h + andc r6,r4,r6 + std r6,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#endif /* CONFIG_SMP */ + ld r4,PACACURRENT(r13) + addi r4,r4,THREAD /* Get THREAD */ + li r6,1 + stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */ + /* enable use of VSX after return */ + oris r12,r12,MSR_VSX@h + std r12,_MSR(r1) +#ifndef CONFIG_SMP + /* Update last_task_used_math to 'current' */ + ld r4,PACACURRENT(r13) + std r4,0(r3) +#endif /* CONFIG_SMP */ + b fast_exception_return +#endif /* CONFIG_VSX */ + /* * Hash table stuff */ diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 942951e76586..31b9026cf1e3 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -506,6 +506,39 @@ _GLOBAL(giveup_altivec) #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX +/* + * giveup_vsx(tsk) + * Disable VSX for the task given as the argument, + * and save the vector registers in its thread_struct. + * Enables the VSX for use in the kernel on return. + */ +_GLOBAL(giveup_vsx) + mfmsr r5 + oris r5,r5,MSR_VSX@h + mtmsrd r5 /* enable use of VSX now */ + isync + + cmpdi 0,r3,0 + beqlr- /* if no previous owner, done */ + addi r3,r3,THREAD /* want THREAD of task */ + ld r5,PT_REGS(r3) + cmpdi 0,r5,0 + beq 1f + ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) + lis r3,MSR_VSX@h + andc r4,r4,r3 /* disable VSX for previous task */ + std r4,_MSR-STACK_FRAME_OVERHEAD(r5) +1: +#ifndef CONFIG_SMP + li r5,0 + ld r4,last_task_used_vsx@got(r2) + std r5,0(r4) +#endif /* CONFIG_SMP */ + blr + +#endif /* CONFIG_VSX */ + /* kexec_wait(phys_cpu) * * wait for the flag to change, indicating this kernel is going away but diff --git a/arch/powerpc/kernel/ppc32.h b/arch/powerpc/kernel/ppc32.h index 90e562771791..dc16aefe1dd0 100644 --- a/arch/powerpc/kernel/ppc32.h +++ b/arch/powerpc/kernel/ppc32.h @@ -120,6 +120,7 @@ struct mcontext32 { elf_fpregset_t mc_fregs; unsigned int mc_pad[2]; elf_vrregset_t32 mc_vregs __attribute__((__aligned__(16))); + elf_vsrreghalf_t32 mc_vsregs __attribute__((__aligned__(16))); }; struct ucontext32 { diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index d3ac631cbd26..958ecb9ae7dc 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -102,6 +102,9 @@ EXPORT_SYMBOL(giveup_fpu); #ifdef CONFIG_ALTIVEC EXPORT_SYMBOL(giveup_altivec); #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX +EXPORT_SYMBOL(giveup_vsx); +#endif /* CONFIG_VSX */ #ifdef CONFIG_SPE EXPORT_SYMBOL(giveup_spe); #endif /* CONFIG_SPE */ diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 582df70439cb..d52ded366f14 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -53,6 +53,7 @@ extern unsigned long _get_SP(void); #ifndef CONFIG_SMP struct task_struct *last_task_used_math = NULL; struct task_struct *last_task_used_altivec = NULL; +struct task_struct *last_task_used_vsx = NULL; struct task_struct *last_task_used_spe = NULL; #endif @@ -106,11 +107,23 @@ EXPORT_SYMBOL(enable_kernel_fp); int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs) { +#ifdef CONFIG_VSX + int i; + elf_fpreg_t *reg; +#endif + if (!tsk->thread.regs) return 0; flush_fp_to_thread(current); +#ifdef CONFIG_VSX + reg = (elf_fpreg_t *)fpregs; + for (i = 0; i < ELF_NFPREG - 1; i++, reg++) + *reg = tsk->thread.TS_FPR(i); + memcpy(reg, &tsk->thread.fpscr, sizeof(elf_fpreg_t)); +#else memcpy(fpregs, &tsk->thread.TS_FPR(0), sizeof(*fpregs)); +#endif return 1; } @@ -149,7 +162,7 @@ void flush_altivec_to_thread(struct task_struct *tsk) } } -int dump_task_altivec(struct task_struct *tsk, elf_vrregset_t *vrregs) +int dump_task_altivec(struct task_struct *tsk, elf_vrreg_t *vrregs) { /* ELF_NVRREG includes the VSCR and VRSAVE which we need to save * separately, see below */ @@ -179,6 +192,80 @@ int dump_task_altivec(struct task_struct *tsk, elf_vrregset_t *vrregs) } #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX +#if 0 +/* not currently used, but some crazy RAID module might want to later */ +void enable_kernel_vsx(void) +{ + WARN_ON(preemptible()); + +#ifdef CONFIG_SMP + if (current->thread.regs && (current->thread.regs->msr & MSR_VSX)) + giveup_vsx(current); + else + giveup_vsx(NULL); /* just enable vsx for kernel - force */ +#else + giveup_vsx(last_task_used_vsx); +#endif /* CONFIG_SMP */ +} +EXPORT_SYMBOL(enable_kernel_vsx); +#endif + +void flush_vsx_to_thread(struct task_struct *tsk) +{ + if (tsk->thread.regs) { + preempt_disable(); + if (tsk->thread.regs->msr & MSR_VSX) { +#ifdef CONFIG_SMP + BUG_ON(tsk != current); +#endif + giveup_vsx(tsk); + } + preempt_enable(); + } +} + +/* + * This dumps the lower half 64bits of the first 32 VSX registers. + * This needs to be called with dump_task_fp and dump_task_altivec to + * get all the VSX state. + */ +int dump_task_vsx(struct task_struct *tsk, elf_vrreg_t *vrregs) +{ + elf_vrreg_t *reg; + double buf[32]; + int i; + + if (tsk == current) + flush_vsx_to_thread(tsk); + + reg = (elf_vrreg_t *)vrregs; + + for (i = 0; i < 32 ; i++) + buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET]; + memcpy(reg, buf, sizeof(buf)); + + return 1; +} +#endif /* CONFIG_VSX */ + +int dump_task_vector(struct task_struct *tsk, elf_vrregset_t *vrregs) +{ + int rc = 0; + elf_vrreg_t *regs = (elf_vrreg_t *)vrregs; +#ifdef CONFIG_ALTIVEC + rc = dump_task_altivec(tsk, regs); + if (rc) + return rc; + regs += ELF_NVRREG; +#endif + +#ifdef CONFIG_VSX + rc = dump_task_vsx(tsk, regs); +#endif + return rc; +} + #ifdef CONFIG_SPE void enable_kernel_spe(void) @@ -233,6 +320,10 @@ void discard_lazy_cpu_state(void) if (last_task_used_altivec == current) last_task_used_altivec = NULL; #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX + if (last_task_used_vsx == current) + last_task_used_vsx = NULL; +#endif /* CONFIG_VSX */ #ifdef CONFIG_SPE if (last_task_used_spe == current) last_task_used_spe = NULL; @@ -297,6 +388,10 @@ struct task_struct *__switch_to(struct task_struct *prev, if (prev->thread.regs && (prev->thread.regs->msr & MSR_VEC)) giveup_altivec(prev); #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX + if (prev->thread.regs && (prev->thread.regs->msr & MSR_VSX)) + giveup_vsx(prev); +#endif /* CONFIG_VSX */ #ifdef CONFIG_SPE /* * If the previous thread used spe in the last quantum @@ -317,6 +412,10 @@ struct task_struct *__switch_to(struct task_struct *prev, if (new->thread.regs && last_task_used_altivec == new) new->thread.regs->msr |= MSR_VEC; #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX + if (new->thread.regs && last_task_used_vsx == new) + new->thread.regs->msr |= MSR_VSX; +#endif /* CONFIG_VSX */ #ifdef CONFIG_SPE /* Avoid the trap. On smp this this never happens since * we don't set last_task_used_spe @@ -417,6 +516,8 @@ static struct regbit { {MSR_EE, "EE"}, {MSR_PR, "PR"}, {MSR_FP, "FP"}, + {MSR_VEC, "VEC"}, + {MSR_VSX, "VSX"}, {MSR_ME, "ME"}, {MSR_IR, "IR"}, {MSR_DR, "DR"}, @@ -534,6 +635,7 @@ void prepare_to_copy(struct task_struct *tsk) { flush_fp_to_thread(current); flush_altivec_to_thread(current); + flush_vsx_to_thread(current); flush_spe_to_thread(current); } @@ -689,6 +791,9 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) #endif discard_lazy_cpu_state(); +#ifdef CONFIG_VSX + current->thread.used_vsr = 0; +#endif memset(current->thread.fpr, 0, sizeof(current->thread.fpr)); current->thread.fpscr.val = 0; #ifdef CONFIG_ALTIVEC diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 70fbde84b83f..4e203a89e189 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -350,6 +350,51 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset, } #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX +/* + * Currently to set and and get all the vsx state, you need to call + * the fp and VMX calls aswell. This only get/sets the lower 32 + * 128bit VSX registers. + */ + +static int vsr_active(struct task_struct *target, + const struct user_regset *regset) +{ + flush_vsx_to_thread(target); + return target->thread.used_vsr ? regset->n : 0; +} + +static int vsr_get(struct task_struct *target, const struct user_regset *regset, + unsigned int pos, unsigned int count, + void *kbuf, void __user *ubuf) +{ + int ret; + + flush_vsx_to_thread(target); + + ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, + target->thread.fpr, 0, + 32 * sizeof(vector128)); + + return ret; +} + +static int vsr_set(struct task_struct *target, const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + int ret; + + flush_vsx_to_thread(target); + + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + target->thread.fpr, 0, + 32 * sizeof(vector128)); + + return ret; +} +#endif /* CONFIG_VSX */ + #ifdef CONFIG_SPE /* @@ -426,6 +471,9 @@ enum powerpc_regset { #ifdef CONFIG_ALTIVEC REGSET_VMX, #endif +#ifdef CONFIG_VSX + REGSET_VSX, +#endif #ifdef CONFIG_SPE REGSET_SPE, #endif @@ -449,6 +497,13 @@ static const struct user_regset native_regsets[] = { .active = vr_active, .get = vr_get, .set = vr_set }, #endif +#ifdef CONFIG_VSX + [REGSET_VSX] = { + .n = 32, + .size = sizeof(vector128), .align = sizeof(vector128), + .active = vsr_active, .get = vsr_get, .set = vsr_set + }, +#endif #ifdef CONFIG_SPE [REGSET_SPE] = { .n = 35, @@ -849,6 +904,21 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) sizeof(u32)), (const void __user *) data); #endif +#ifdef CONFIG_VSX + case PTRACE_GETVSRREGS: + return copy_regset_to_user(child, &user_ppc_native_view, + REGSET_VSX, + 0, (32 * sizeof(vector128) + + sizeof(u32)), + (void __user *) data); + + case PTRACE_SETVSRREGS: + return copy_regset_from_user(child, &user_ppc_native_view, + REGSET_VSX, + 0, (32 * sizeof(vector128) + + sizeof(u32)), + (const void __user *) data); +#endif #ifdef CONFIG_SPE case PTRACE_GETEVRREGS: /* Get the child spe register state. */ diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index f7fa395b9fb5..349d3487d920 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -378,6 +378,21 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, memcpy(&buf[i], ¤t->thread.fpscr, sizeof(double)); if (__copy_to_user(&frame->mc_fregs, buf, ELF_NFPREG * sizeof(double))) return 1; + /* + * Copy VSR 0-31 upper half from thread_struct to local + * buffer, then write that to userspace. Also set MSR_VSX in + * the saved MSR value to indicate that frame->mc_vregs + * contains valid data + */ + if (current->thread.used_vsr) { + flush_vsx_to_thread(current); + for (i = 0; i < 32 ; i++) + buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET]; + if (__copy_to_user(&frame->mc_vsregs, buf, + ELF_NVSRHALFREG * sizeof(double))) + return 1; + msr |= MSR_VSX; + } #else /* save floating-point registers */ if (__copy_to_user(&frame->mc_fregs, current->thread.fpr, @@ -482,6 +497,24 @@ static long restore_user_regs(struct pt_regs *regs, for (i = 0; i < 32 ; i++) current->thread.TS_FPR(i) = buf[i]; memcpy(¤t->thread.fpscr, &buf[i], sizeof(double)); + /* + * Force the process to reload the VSX registers from + * current->thread when it next does VSX instruction. + */ + regs->msr &= ~MSR_VSX; + if (msr & MSR_VSX) { + /* + * Restore altivec registers from the stack to a local + * buffer, then write this out to the thread_struct + */ + if (__copy_from_user(buf, &sr->mc_vsregs, + sizeof(sr->mc_vsregs))) + return 1; + for (i = 0; i < 32 ; i++) + current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; + } else if (current->thread.used_vsr) + for (i = 0; i < 32 ; i++) + current->thread.fpr[i][TS_VSRLOWOFFSET] = 0; #else if (__copy_from_user(current->thread.fpr, &sr->mc_fregs, sizeof(sr->mc_fregs))) diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index a587b33cd6b9..34f37e59bacc 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -123,6 +123,22 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, buf[i] = current->thread.TS_FPR(i); memcpy(&buf[i], ¤t->thread.fpscr, sizeof(double)); err |= __copy_to_user(&sc->fp_regs, buf, FP_REGS_SIZE); + /* + * Copy VSX low doubleword to local buffer for formatting, + * then out to userspace. Update v_regs to point after the + * VMX data. + */ + if (current->thread.used_vsr) { + flush_vsx_to_thread(current); + v_regs += ELF_NVRREG; + for (i = 0; i < 32 ; i++) + buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET]; + err |= __copy_to_user(v_regs, buf, 32 * sizeof(double)); + /* set MSR_VSX in the MSR value in the frame to + * indicate that sc->vs_reg) contains valid data. + */ + msr |= MSR_VSX; + } #else /* CONFIG_VSX */ /* copy fpr regs and fpscr */ err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE); @@ -197,7 +213,7 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, * This has to be done before copying stuff into current->thread.fpr/vr * for the reasons explained in the previous comment. */ - regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC); + regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX); #ifdef CONFIG_ALTIVEC err |= __get_user(v_regs, &sc->v_regs); @@ -226,6 +242,19 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, current->thread.TS_FPR(i) = buf[i]; memcpy(¤t->thread.fpscr, &buf[i], sizeof(double)); + /* + * Get additional VSX data. Update v_regs to point after the + * VMX data. Copy VSX low doubleword from userspace to local + * buffer for formatting, then into the taskstruct. + */ + v_regs += ELF_NVRREG; + if ((msr & MSR_VSX) != 0) + err |= __copy_from_user(buf, v_regs, 32 * sizeof(double)); + else + memset(buf, 0, 32 * sizeof(double)); + + for (i = 0; i < 32 ; i++) + current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; #else err |= __copy_from_user(¤t->thread.fpr, &sc->fp_regs, FP_REGS_SIZE); #endif diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index b463d48145a4..878fbddb6ae1 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -967,6 +967,20 @@ void altivec_unavailable_exception(struct pt_regs *regs) die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT); } +void vsx_unavailable_exception(struct pt_regs *regs) +{ + if (user_mode(regs)) { + /* A user program has executed an vsx instruction, + but this kernel doesn't support vsx. */ + _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); + return; + } + + printk(KERN_EMERG "Unrecoverable VSX Unavailable Exception " + "%lx at %lx\n", regs->trap, regs->nip); + die("Unrecoverable VSX Unavailable Exception", regs, SIGABRT); +} + void performance_monitor_exception(struct pt_regs *regs) { perf_irq(regs); @@ -1099,6 +1113,21 @@ void altivec_assist_exception(struct pt_regs *regs) } #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX +void vsx_assist_exception(struct pt_regs *regs) +{ + if (!user_mode(regs)) { + printk(KERN_EMERG "VSX assist exception in kernel mode" + " at %lx\n", regs->nip); + die("Kernel VSX assist exception", regs, SIGILL); + } + + flush_vsx_to_thread(current); + printk(KERN_INFO "VSX assist not supported at %lx\n", regs->nip); + _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); +} +#endif /* CONFIG_VSX */ + #ifdef CONFIG_FSL_BOOKE void CacheLockingException(struct pt_regs *regs, unsigned long address, unsigned long error_code) diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h index d1e3bda0625d..746e53d60cbe 100644 --- a/include/asm-powerpc/elf.h +++ b/include/asm-powerpc/elf.h @@ -109,6 +109,7 @@ typedef elf_gregset_t32 compat_elf_gregset_t; #ifdef __powerpc64__ # define ELF_NVRREG32 33 /* includes vscr & vrsave stuffed together */ # define ELF_NVRREG 34 /* includes vscr & vrsave in split vectors */ +# define ELF_NVSRHALFREG 32 /* Half the vsx registers */ # define ELF_GREG_TYPE elf_greg_t64 #else # define ELF_NEVRREG 34 /* includes acc (as 2) */ @@ -158,6 +159,7 @@ typedef __vector128 elf_vrreg_t; typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG]; #ifdef __powerpc64__ typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32]; +typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG]; #endif #ifdef __KERNEL__ @@ -219,8 +221,8 @@ extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); typedef elf_vrregset_t elf_fpxregset_t; #ifdef CONFIG_ALTIVEC -extern int dump_task_altivec(struct task_struct *, elf_vrregset_t *vrregs); -#define ELF_CORE_COPY_XFPREGS(tsk, regs) dump_task_altivec(tsk, regs) +extern int dump_task_vector(struct task_struct *, elf_vrregset_t *vrregs); +#define ELF_CORE_COPY_XFPREGS(tsk, regs) dump_task_vector(tsk, regs) #define ELF_CORE_XFPREG_TYPE NT_PPC_VMX #endif diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h index 38d87e5e569d..3d6e31024e56 100644 --- a/include/asm-powerpc/ptrace.h +++ b/include/asm-powerpc/ptrace.h @@ -224,6 +224,14 @@ extern void user_disable_single_step(struct task_struct *); #define PT_VRSAVE_32 (PT_VR0 + 33*4) #endif +/* + * Only store first 32 VSRs here. The second 32 VSRs in VR0-31 + */ +#define PT_VSR0 150 /* each VSR reg occupies 2 slots in 64-bit */ +#define PT_VSR31 (PT_VSR0 + 2*31) +#ifdef __KERNEL__ +#define PT_VSR0_32 300 /* each VSR reg occupies 4 slots in 32-bit */ +#endif #endif /* __powerpc64__ */ /* @@ -246,6 +254,10 @@ extern void user_disable_single_step(struct task_struct *); #define PTRACE_GETEVRREGS 20 #define PTRACE_SETEVRREGS 21 +/* Get the first 32 128bit VSX registers */ +#define PTRACE_GETVSRREGS 27 +#define PTRACE_SETVSRREGS 28 + /* * Get or set a debug register. The first 16 are DABR registers and the * second 16 are IABR registers. diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index 7256efb5c140..bbccadfee0d6 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -30,6 +30,7 @@ #define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */ #define MSR_HV_LG 60 /* Hypervisor state */ #define MSR_VEC_LG 25 /* Enable AltiVec */ +#define MSR_VSX_LG 23 /* Enable VSX */ #define MSR_POW_LG 18 /* Enable Power Management */ #define MSR_WE_LG 18 /* Wait State Enable */ #define MSR_TGPR_LG 17 /* TLB Update registers in use */ @@ -71,6 +72,7 @@ #endif #define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */ +#define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */ #define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */ #define MSR_WE __MASK(MSR_WE_LG) /* Wait State Enable */ #define MSR_TGPR __MASK(MSR_TGPR_LG) /* TLB Update registers in use */ diff --git a/include/asm-powerpc/sigcontext.h b/include/asm-powerpc/sigcontext.h index 165d630e1cf3..9c1f24fd5d11 100644 --- a/include/asm-powerpc/sigcontext.h +++ b/include/asm-powerpc/sigcontext.h @@ -43,9 +43,44 @@ struct sigcontext { * it must be copied via a vector register to/from storage) or as a word. * The entry with index 33 contains the vrsave as the first word (offset 0) * within the quadword. + * + * Part of the VSX data is stored here also by extending vmx_restore + * by an additional 32 double words. Architecturally the layout of + * the VSR registers and how they overlap on top of the legacy FPR and + * VR registers is shown below: + * + * VSR doubleword 0 VSR doubleword 1 + * ---------------------------------------------------------------- + * VSR[0] | FPR[0] | | + * ---------------------------------------------------------------- + * VSR[1] | FPR[1] | | + * ---------------------------------------------------------------- + * | ... | | + * | ... | | + * ---------------------------------------------------------------- + * VSR[30] | FPR[30] | | + * ---------------------------------------------------------------- + * VSR[31] | FPR[31] | | + * ---------------------------------------------------------------- + * VSR[32] | VR[0] | + * ---------------------------------------------------------------- + * VSR[33] | VR[1] | + * ---------------------------------------------------------------- + * | ... | + * | ... | + * ---------------------------------------------------------------- + * VSR[62] | VR[30] | + * ---------------------------------------------------------------- + * VSR[63] | VR[31] | + * ---------------------------------------------------------------- + * + * FPR/VSR 0-31 doubleword 0 is stored in fp_regs, and VMX/VSR 32-63 + * is stored at the start of vmx_reserve. vmx_reserve is extended for + * backwards compatility to store VSR 0-31 doubleword 1 after the VMX + * registers and vscr/vrsave. */ elf_vrreg_t __user *v_regs; - long vmx_reserve[ELF_NVRREG+ELF_NVRREG+1]; + long vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1]; #endif }; diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 2642a92b724f..0c12c66733f6 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -139,6 +139,7 @@ extern void enable_kernel_altivec(void); extern void giveup_altivec(struct task_struct *); extern void load_up_altivec(struct task_struct *); extern int emulate_altivec(struct pt_regs *); +extern void giveup_vsx(struct task_struct *); extern void enable_kernel_spe(void); extern void giveup_spe(struct task_struct *); extern void load_up_spe(struct task_struct *); @@ -162,6 +163,14 @@ static inline void flush_altivec_to_thread(struct task_struct *t) } #endif +#ifdef CONFIG_VSX +extern void flush_vsx_to_thread(struct task_struct *); +#else +static inline void flush_vsx_to_thread(struct task_struct *t) +{ +} +#endif + #ifdef CONFIG_SPE extern void flush_spe_to_thread(struct task_struct *); #else -- cgit v1.2.3 From 96d5b52c8473ae6ee63d592474bcc1255df06102 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 25 Jun 2008 14:07:18 +1000 Subject: powerpc: Add CONFIG_VSX config option Add CONFIG_VSX config build option. Must compile with POWER4, FPU and ALTIVEC. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/Kconfig.cputype | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index c66b8ed7e7d9..5bc4b611ff88 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -160,6 +160,22 @@ config ALTIVEC If in doubt, say Y here. +config VSX + bool "VSX Support" + depends on POWER4 && ALTIVEC && PPC_FPU + ---help--- + + This option enables kernel support for the Vector Scaler extensions + to the PowerPC processor. The kernel currently supports saving and + restoring VSX registers, and turning on the 'VSX enable' bit so user + processes can execute VSX instructions. + + This option is only useful if you have a processor that supports + VSX (P7 and above), but does not have any affect on a non-VSX + CPUs (it does, however add code to the kernel). + + If in doubt, say Y here. + config SPE bool "SPE Support" depends on E200 || (E500 && !PPC_E500MC) -- cgit v1.2.3 From 9d4ae9fc92f347b93b42c9c0ccde7138c1202e36 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 26 Jun 2008 18:58:11 +1000 Subject: powerpc/bootwrapper: Pad .dtb by default Since most bootloaders or wrappers tend to update or add some information to the .dtb they a handled they need some working space to do that in. By default add 1K of padding via a default setting of DTS_FLAGS. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/powerpc/boot/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 4721baf92892..751a6e6070d2 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -35,6 +35,8 @@ endif BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt +DTS_FLAGS ?= -p 1024 + $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 -- cgit v1.2.3 From 03d70617b8a789c3721afaafde06fcbba7c7ebf1 Mon Sep 17 00:00:00 2001 From: Andrew Lewis Date: Thu, 26 Jun 2008 19:29:05 +1000 Subject: powerpc: Prevent memory corruption due to cache invalidation of unaligned DMA buffer On PowerPC processors with non-coherent cache architectures the DMA subsystem calls invalidate_dcache_range() before performing a DMA read operation. If the address and length of the DMA buffer are not aligned to a cache-line boundary this can result in memory outside of the DMA buffer being invalidated in the cache. If this memory has an uncommitted store then the data will be lost and a subsequent read of that address will result in an old value being returned from main memory. Only when the DMA buffer starts on a cache-line boundary and is an exact mutiple of the cache-line size can invalidate_dcache_range() be called, otherwise flush_dcache_range() must be called. flush_dcache_range() will first flush uncommitted writes, and then invalidate the cache. Signed-off-by: Andrew Lewis Signed-off-by: Paul Mackerras --- arch/powerpc/lib/dma-noncoherent.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c index 6656d47841d0..5d83907f6591 100644 --- a/arch/powerpc/lib/dma-noncoherent.c +++ b/arch/powerpc/lib/dma-noncoherent.c @@ -348,8 +348,15 @@ void __dma_sync(void *vaddr, size_t size, int direction) switch (direction) { case DMA_NONE: BUG(); - case DMA_FROM_DEVICE: /* invalidate only */ - invalidate_dcache_range(start, end); + case DMA_FROM_DEVICE: + /* + * invalidate only when cache-line aligned otherwise there is + * the potential for discarding uncommitted data from the cache + */ + if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1))) + flush_dcache_range(start, end); + else + invalidate_dcache_range(start, end); break; case DMA_TO_DEVICE: /* writeback only */ clean_dcache_range(start, end); -- cgit v1.2.3 From 016b33c4958681c24056abed8ec95844a0da80a3 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Thu, 26 Jun 2008 19:55:58 +1000 Subject: powerpc: Add 64 bit version of huge_ptep_set_wrprotect The implementation of huge_ptep_set_wrprotect() directly calls ptep_set_wrprotect() to mark a hugepte write protected. However this call is not appropriate on ppc64 kernels as this is a small page only implementation. This can lead to the hash not being flushed correctly when a mapping is being converted to COW, allowing processes to continue using the original copy. Currently huge_ptep_set_wrprotect() unconditionally calls ptep_set_wrprotect(). This is fine on ppc32 kernels as this call is generic. On 64 bit this is implemented as: pte_update(mm, addr, ptep, _PAGE_RW, 0); On ppc64 this last parameter is the page size and is passed directly on to hpte_need_flush(): hpte_need_flush(mm, addr, ptep, old, huge); And this directly affects the page size we pass to flush_hash_page(): flush_hash_page(vaddr, rpte, psize, ssize, 0); As this changes the way the hash is calculated we will flush the wrong pages, potentially leaving live hashes to the original page. Move the definition of huge_ptep_set_wrprotect() to the 32/64 bit specific headers. Signed-off-by: Andy Whitcroft Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- include/asm-powerpc/hugetlb.h | 6 ------ include/asm-powerpc/pgtable-ppc32.h | 6 ++++++ include/asm-powerpc/pgtable-ppc64.h | 9 +++++++++ 3 files changed, 15 insertions(+), 6 deletions(-) diff --git a/include/asm-powerpc/hugetlb.h b/include/asm-powerpc/hugetlb.h index 649c6c3b87b3..be32ff02f4a0 100644 --- a/include/asm-powerpc/hugetlb.h +++ b/include/asm-powerpc/hugetlb.h @@ -49,12 +49,6 @@ static inline pte_t huge_pte_wrprotect(pte_t pte) return pte_wrprotect(pte); } -static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - ptep_set_wrprotect(mm, addr, ptep); -} - static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep, pte_t pte, int dirty) diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index dde466bd2cea..e1d2bb57f1d5 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -652,6 +652,12 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, { pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0); } +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + ptep_set_wrprotect(mm, addr, ptep); +} + #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h index 2e48be841cc9..b2754d46be44 100644 --- a/include/asm-powerpc/pgtable-ppc64.h +++ b/include/asm-powerpc/pgtable-ppc64.h @@ -312,6 +312,15 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, return; old = pte_update(mm, addr, ptep, _PAGE_RW, 0); } +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old; + + if ((pte_val(*ptep) & _PAGE_RW) == 0) + return; + old = pte_update(mm, addr, ptep, _PAGE_RW, 1); +} /* * We currently remove entries from the hashtable regardless of whether -- cgit v1.2.3 From 3420b5daffbf5892634fd89a04c010e71e8aeebf Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Fri, 27 Jun 2008 03:02:15 +1000 Subject: powerpc: Remove experimental status of kdump on 64-bit powerpc This removes the experimental status of kdump on PPC64. kdump is on PPC64 now since more than one year and it has proven to be stable. Signed-off-by: Bernhard Walle Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 2cde4e333fd5..f2a0f50146e1 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -308,8 +308,8 @@ config KEXEC strongly in flux, so no good recommendation can be made. config CRASH_DUMP - bool "Build a kdump crash kernel (EXPERIMENTAL)" - depends on PPC_MULTIPLATFORM && PPC64 && EXPERIMENTAL + bool "Build a kdump crash kernel" + depends on PPC_MULTIPLATFORM && PPC64 help Build a kernel suitable for use as a kdump capture kernel. The kernel will be linked at a different address than normal, and -- cgit v1.2.3 From fcbc5a976b1cafe2e866871c86d239d57503bfd5 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 27 Jun 2008 16:18:27 +1000 Subject: powerpc: Explicitly copy elements of pt_regs Gcc 4.3 produced this warning: arch/powerpc/kernel/signal_64.c: In function 'restore_sigcontext': arch/powerpc/kernel/signal_64.c:161: warning: array subscript is above array bounds This is caused by us copying to aliases of elements of the pt_regs structure. Make those explicit. This adds one extra __get_user and unrolls a loop. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/signal_64.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 34f37e59bacc..6e6b01a6db5f 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -170,29 +170,29 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, #endif unsigned long err = 0; unsigned long save_r13 = 0; - elf_greg_t *gregs = (elf_greg_t *)regs; unsigned long msr; - int i; /* If this is not a signal return, we preserve the TLS in r13 */ if (!sig) save_r13 = regs->gpr[13]; - /* copy everything before MSR */ - err |= __copy_from_user(regs, &sc->gp_regs, - PT_MSR*sizeof(unsigned long)); - + /* copy the GPRs */ + err |= __copy_from_user(regs->gpr, sc->gp_regs, sizeof(regs->gpr)); + err |= __get_user(regs->nip, &sc->gp_regs[PT_NIP]); /* get MSR separately, transfer the LE bit if doing signal return */ err |= __get_user(msr, &sc->gp_regs[PT_MSR]); if (sig) regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE); - + err |= __get_user(regs->orig_gpr3, &sc->gp_regs[PT_ORIG_R3]); + err |= __get_user(regs->ctr, &sc->gp_regs[PT_CTR]); + err |= __get_user(regs->link, &sc->gp_regs[PT_LNK]); + err |= __get_user(regs->xer, &sc->gp_regs[PT_XER]); + err |= __get_user(regs->ccr, &sc->gp_regs[PT_CCR]); /* skip SOFTE */ - for (i = PT_MSR+1; i <= PT_RESULT; i++) { - if (i == PT_SOFTE) - continue; - err |= __get_user(gregs[i], &sc->gp_regs[i]); - } + err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]); + err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]); + err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]); + err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]); if (!sig) regs->gpr[13] = save_r13; -- cgit v1.2.3 From 89b5810f6ed4b2d42415e5ec656ab6b148cd2bde Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Sat, 28 Jun 2008 16:51:35 +1000 Subject: powerpc: Make sure that include/asm-powerpc/spinlock.h does not trigger compilation warnings When compiling kernel modules for ppc that include , gcc prints a warning message every time it encounters a function declaration where the inline keyword appears after the return type. This makes sure that the order of the inline keyword and the return type is as gcc expects it. Additionally, the __inline__ keyword is replaced by inline, as checkpatch expects. Signed-off-by: Bart Van Assche Signed-off-by: Paul Mackerras --- include/asm-powerpc/spinlock.h | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/include/asm-powerpc/spinlock.h b/include/asm-powerpc/spinlock.h index 258c93993190..f56a843f4705 100644 --- a/include/asm-powerpc/spinlock.h +++ b/include/asm-powerpc/spinlock.h @@ -54,7 +54,7 @@ * This returns the old value in the lock, so we succeeded * in getting the lock if the return value is 0. */ -static __inline__ unsigned long __spin_trylock(raw_spinlock_t *lock) +static inline unsigned long __spin_trylock(raw_spinlock_t *lock) { unsigned long tmp, token; @@ -73,7 +73,7 @@ static __inline__ unsigned long __spin_trylock(raw_spinlock_t *lock) return tmp; } -static int __inline__ __raw_spin_trylock(raw_spinlock_t *lock) +static inline int __raw_spin_trylock(raw_spinlock_t *lock) { CLEAR_IO_SYNC; return __spin_trylock(lock) == 0; @@ -104,7 +104,7 @@ extern void __rw_yield(raw_rwlock_t *lock); #define SHARED_PROCESSOR 0 #endif -static void __inline__ __raw_spin_lock(raw_spinlock_t *lock) +static inline void __raw_spin_lock(raw_spinlock_t *lock) { CLEAR_IO_SYNC; while (1) { @@ -119,7 +119,8 @@ static void __inline__ __raw_spin_lock(raw_spinlock_t *lock) } } -static void __inline__ __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) +static inline +void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) { unsigned long flags_dis; @@ -139,7 +140,7 @@ static void __inline__ __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long } } -static __inline__ void __raw_spin_unlock(raw_spinlock_t *lock) +static inline void __raw_spin_unlock(raw_spinlock_t *lock) { SYNC_IO; __asm__ __volatile__("# __raw_spin_unlock\n\t" @@ -180,7 +181,7 @@ extern void __raw_spin_unlock_wait(raw_spinlock_t *lock); * This returns the old value in the lock + 1, * so we got a read lock if the return value is > 0. */ -static long __inline__ __read_trylock(raw_rwlock_t *rw) +static inline long __read_trylock(raw_rwlock_t *rw) { long tmp; @@ -204,7 +205,7 @@ static long __inline__ __read_trylock(raw_rwlock_t *rw) * This returns the old value in the lock, * so we got the write lock if the return value is 0. */ -static __inline__ long __write_trylock(raw_rwlock_t *rw) +static inline long __write_trylock(raw_rwlock_t *rw) { long tmp, token; @@ -224,7 +225,7 @@ static __inline__ long __write_trylock(raw_rwlock_t *rw) return tmp; } -static void __inline__ __raw_read_lock(raw_rwlock_t *rw) +static inline void __raw_read_lock(raw_rwlock_t *rw) { while (1) { if (likely(__read_trylock(rw) > 0)) @@ -238,7 +239,7 @@ static void __inline__ __raw_read_lock(raw_rwlock_t *rw) } } -static void __inline__ __raw_write_lock(raw_rwlock_t *rw) +static inline void __raw_write_lock(raw_rwlock_t *rw) { while (1) { if (likely(__write_trylock(rw) == 0)) @@ -252,17 +253,17 @@ static void __inline__ __raw_write_lock(raw_rwlock_t *rw) } } -static int __inline__ __raw_read_trylock(raw_rwlock_t *rw) +static inline int __raw_read_trylock(raw_rwlock_t *rw) { return __read_trylock(rw) > 0; } -static int __inline__ __raw_write_trylock(raw_rwlock_t *rw) +static inline int __raw_write_trylock(raw_rwlock_t *rw) { return __write_trylock(rw) == 0; } -static void __inline__ __raw_read_unlock(raw_rwlock_t *rw) +static inline void __raw_read_unlock(raw_rwlock_t *rw) { long tmp; @@ -279,7 +280,7 @@ static void __inline__ __raw_read_unlock(raw_rwlock_t *rw) : "cr0", "memory"); } -static __inline__ void __raw_write_unlock(raw_rwlock_t *rw) +static inline void __raw_write_unlock(raw_rwlock_t *rw) { __asm__ __volatile__("# write_unlock\n\t" LWSYNC_ON_SMP: : :"memory"); -- cgit v1.2.3 From 908ec7afacfdc83dc10938ed1d3c38b3526034ec Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 30 Jun 2008 14:42:18 -0700 Subject: x86: remove arbitrary ELF section limit in i386 relocatable kernel Impact: build failure in maximal configurations The 32-bit x86 relocatable kernel requires an auxilliary host program to process the relocations. This program had a hard-coded arbitrary limit of a 100 ELF sections. Instead of a hard-coded limit, allocate the structures dynamically. Signed-off-by: H. Peter Anvin Acked-by: Vivek Goyal --- arch/x86/boot/compressed/relocs.c | 198 +++++++++++++++++++++----------------- 1 file changed, 110 insertions(+), 88 deletions(-) diff --git a/arch/x86/boot/compressed/relocs.c b/arch/x86/boot/compressed/relocs.c index edaadea90aaf..a1310c52fc0c 100644 --- a/arch/x86/boot/compressed/relocs.c +++ b/arch/x86/boot/compressed/relocs.c @@ -10,16 +10,20 @@ #define USE_BSD #include -#define MAX_SHDRS 100 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) static Elf32_Ehdr ehdr; -static Elf32_Shdr shdr[MAX_SHDRS]; -static Elf32_Sym *symtab[MAX_SHDRS]; -static Elf32_Rel *reltab[MAX_SHDRS]; -static char *strtab[MAX_SHDRS]; static unsigned long reloc_count, reloc_idx; static unsigned long *relocs; +struct section { + Elf32_Shdr shdr; + struct section *link; + Elf32_Sym *symtab; + Elf32_Rel *reltab; + char *strtab; +}; +static struct section *secs; + /* * Following symbols have been audited. There values are constant and do * not change if bzImage is loaded at a different physical address than @@ -35,7 +39,7 @@ static int is_safe_abs_reloc(const char* sym_name) { int i; - for(i = 0; i < ARRAY_SIZE(safe_abs_relocs); i++) { + for (i = 0; i < ARRAY_SIZE(safe_abs_relocs); i++) { if (!strcmp(sym_name, safe_abs_relocs[i])) /* Match found */ return 1; @@ -137,10 +141,10 @@ static const char *sec_name(unsigned shndx) { const char *sec_strtab; const char *name; - sec_strtab = strtab[ehdr.e_shstrndx]; + sec_strtab = secs[ehdr.e_shstrndx].strtab; name = ""; if (shndx < ehdr.e_shnum) { - name = sec_strtab + shdr[shndx].sh_name; + name = sec_strtab + secs[shndx].shdr.sh_name; } else if (shndx == SHN_ABS) { name = "ABSOLUTE"; @@ -159,7 +163,7 @@ static const char *sym_name(const char *sym_strtab, Elf32_Sym *sym) name = sym_strtab + sym->st_name; } else { - name = sec_name(shdr[sym->st_shndx].sh_name); + name = sec_name(secs[sym->st_shndx].shdr.sh_name); } return name; } @@ -244,29 +248,34 @@ static void read_ehdr(FILE *fp) static void read_shdrs(FILE *fp) { int i; - if (ehdr.e_shnum > MAX_SHDRS) { - die("%d section headers supported: %d\n", - ehdr.e_shnum, MAX_SHDRS); + Elf32_Shdr shdr; + + secs = calloc(ehdr.e_shnum, sizeof(struct section)); + if (!secs) { + die("Unable to allocate %d section headers\n", + ehdr.e_shnum); } if (fseek(fp, ehdr.e_shoff, SEEK_SET) < 0) { die("Seek to %d failed: %s\n", ehdr.e_shoff, strerror(errno)); } - if (fread(&shdr, sizeof(shdr[0]), ehdr.e_shnum, fp) != ehdr.e_shnum) { - die("Cannot read ELF section headers: %s\n", - strerror(errno)); - } - for(i = 0; i < ehdr.e_shnum; i++) { - shdr[i].sh_name = elf32_to_cpu(shdr[i].sh_name); - shdr[i].sh_type = elf32_to_cpu(shdr[i].sh_type); - shdr[i].sh_flags = elf32_to_cpu(shdr[i].sh_flags); - shdr[i].sh_addr = elf32_to_cpu(shdr[i].sh_addr); - shdr[i].sh_offset = elf32_to_cpu(shdr[i].sh_offset); - shdr[i].sh_size = elf32_to_cpu(shdr[i].sh_size); - shdr[i].sh_link = elf32_to_cpu(shdr[i].sh_link); - shdr[i].sh_info = elf32_to_cpu(shdr[i].sh_info); - shdr[i].sh_addralign = elf32_to_cpu(shdr[i].sh_addralign); - shdr[i].sh_entsize = elf32_to_cpu(shdr[i].sh_entsize); + for (i = 0; i < ehdr.e_shnum; i++) { + struct section *sec = &secs[i]; + if (fread(&shdr, sizeof shdr, 1, fp) != 1) + die("Cannot read ELF section headers %d/%d: %s\n", + i, ehdr.e_shnum, strerror(errno)); + sec->shdr.sh_name = elf32_to_cpu(shdr.sh_name); + sec->shdr.sh_type = elf32_to_cpu(shdr.sh_type); + sec->shdr.sh_flags = elf32_to_cpu(shdr.sh_flags); + sec->shdr.sh_addr = elf32_to_cpu(shdr.sh_addr); + sec->shdr.sh_offset = elf32_to_cpu(shdr.sh_offset); + sec->shdr.sh_size = elf32_to_cpu(shdr.sh_size); + sec->shdr.sh_link = elf32_to_cpu(shdr.sh_link); + sec->shdr.sh_info = elf32_to_cpu(shdr.sh_info); + sec->shdr.sh_addralign = elf32_to_cpu(shdr.sh_addralign); + sec->shdr.sh_entsize = elf32_to_cpu(shdr.sh_entsize); + if (sec->shdr.sh_link < ehdr.e_shnum) + sec->link = &secs[sec->shdr.sh_link]; } } @@ -274,20 +283,22 @@ static void read_shdrs(FILE *fp) static void read_strtabs(FILE *fp) { int i; - for(i = 0; i < ehdr.e_shnum; i++) { - if (shdr[i].sh_type != SHT_STRTAB) { + for (i = 0; i < ehdr.e_shnum; i++) { + struct section *sec = &secs[i]; + if (sec->shdr.sh_type != SHT_STRTAB) { continue; } - strtab[i] = malloc(shdr[i].sh_size); - if (!strtab[i]) { + sec->strtab = malloc(sec->shdr.sh_size); + if (!sec->strtab) { die("malloc of %d bytes for strtab failed\n", - shdr[i].sh_size); + sec->shdr.sh_size); } - if (fseek(fp, shdr[i].sh_offset, SEEK_SET) < 0) { + if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) { die("Seek to %d failed: %s\n", - shdr[i].sh_offset, strerror(errno)); + sec->shdr.sh_offset, strerror(errno)); } - if (fread(strtab[i], 1, shdr[i].sh_size, fp) != shdr[i].sh_size) { + if (fread(sec->strtab, 1, sec->shdr.sh_size, fp) + != sec->shdr.sh_size) { die("Cannot read symbol table: %s\n", strerror(errno)); } @@ -297,28 +308,31 @@ static void read_strtabs(FILE *fp) static void read_symtabs(FILE *fp) { int i,j; - for(i = 0; i < ehdr.e_shnum; i++) { - if (shdr[i].sh_type != SHT_SYMTAB) { + for (i = 0; i < ehdr.e_shnum; i++) { + struct section *sec = &secs[i]; + if (sec->shdr.sh_type != SHT_SYMTAB) { continue; } - symtab[i] = malloc(shdr[i].sh_size); - if (!symtab[i]) { + sec->symtab = malloc(sec->shdr.sh_size); + if (!sec->symtab) { die("malloc of %d bytes for symtab failed\n", - shdr[i].sh_size); + sec->shdr.sh_size); } - if (fseek(fp, shdr[i].sh_offset, SEEK_SET) < 0) { + if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) { die("Seek to %d failed: %s\n", - shdr[i].sh_offset, strerror(errno)); + sec->shdr.sh_offset, strerror(errno)); } - if (fread(symtab[i], 1, shdr[i].sh_size, fp) != shdr[i].sh_size) { + if (fread(sec->symtab, 1, sec->shdr.sh_size, fp) + != sec->shdr.sh_size) { die("Cannot read symbol table: %s\n", strerror(errno)); } - for(j = 0; j < shdr[i].sh_size/sizeof(symtab[i][0]); j++) { - symtab[i][j].st_name = elf32_to_cpu(symtab[i][j].st_name); - symtab[i][j].st_value = elf32_to_cpu(symtab[i][j].st_value); - symtab[i][j].st_size = elf32_to_cpu(symtab[i][j].st_size); - symtab[i][j].st_shndx = elf16_to_cpu(symtab[i][j].st_shndx); + for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) { + Elf32_Sym *sym = &sec->symtab[j]; + sym->st_name = elf32_to_cpu(sym->st_name); + sym->st_value = elf32_to_cpu(sym->st_value); + sym->st_size = elf32_to_cpu(sym->st_size); + sym->st_shndx = elf16_to_cpu(sym->st_shndx); } } } @@ -327,26 +341,29 @@ static void read_symtabs(FILE *fp) static void read_relocs(FILE *fp) { int i,j; - for(i = 0; i < ehdr.e_shnum; i++) { - if (shdr[i].sh_type != SHT_REL) { + for (i = 0; i < ehdr.e_shnum; i++) { + struct section *sec = &secs[i]; + if (sec->shdr.sh_type != SHT_REL) { continue; } - reltab[i] = malloc(shdr[i].sh_size); - if (!reltab[i]) { + sec->reltab = malloc(sec->shdr.sh_size); + if (!sec->reltab) { die("malloc of %d bytes for relocs failed\n", - shdr[i].sh_size); + sec->shdr.sh_size); } - if (fseek(fp, shdr[i].sh_offset, SEEK_SET) < 0) { + if (fseek(fp, sec->shdr.sh_offset, SEEK_SET) < 0) { die("Seek to %d failed: %s\n", - shdr[i].sh_offset, strerror(errno)); + sec->shdr.sh_offset, strerror(errno)); } - if (fread(reltab[i], 1, shdr[i].sh_size, fp) != shdr[i].sh_size) { + if (fread(sec->reltab, 1, sec->shdr.sh_size, fp) + != sec->shdr.sh_size) { die("Cannot read symbol table: %s\n", strerror(errno)); } - for(j = 0; j < shdr[i].sh_size/sizeof(reltab[0][0]); j++) { - reltab[i][j].r_offset = elf32_to_cpu(reltab[i][j].r_offset); - reltab[i][j].r_info = elf32_to_cpu(reltab[i][j].r_info); + for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) { + Elf32_Rel *rel = &sec->reltab[j]; + rel->r_offset = elf32_to_cpu(rel->r_offset); + rel->r_info = elf32_to_cpu(rel->r_info); } } } @@ -357,19 +374,21 @@ static void print_absolute_symbols(void) int i; printf("Absolute symbols\n"); printf(" Num: Value Size Type Bind Visibility Name\n"); - for(i = 0; i < ehdr.e_shnum; i++) { + for (i = 0; i < ehdr.e_shnum; i++) { + struct section *sec = &secs[i]; char *sym_strtab; Elf32_Sym *sh_symtab; int j; - if (shdr[i].sh_type != SHT_SYMTAB) { + + if (sec->shdr.sh_type != SHT_SYMTAB) { continue; } - sh_symtab = symtab[i]; - sym_strtab = strtab[shdr[i].sh_link]; - for(j = 0; j < shdr[i].sh_size/sizeof(symtab[0][0]); j++) { + sh_symtab = sec->symtab; + sym_strtab = sec->link->strtab; + for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Sym); j++) { Elf32_Sym *sym; const char *name; - sym = &symtab[i][j]; + sym = &sec->symtab[j]; name = sym_name(sym_strtab, sym); if (sym->st_shndx != SHN_ABS) { continue; @@ -389,26 +408,27 @@ static void print_absolute_relocs(void) { int i, printed = 0; - for(i = 0; i < ehdr.e_shnum; i++) { + for (i = 0; i < ehdr.e_shnum; i++) { + struct section *sec = &secs[i]; + struct section *sec_applies, *sec_symtab; char *sym_strtab; Elf32_Sym *sh_symtab; - unsigned sec_applies, sec_symtab; int j; - if (shdr[i].sh_type != SHT_REL) { + if (sec->shdr.sh_type != SHT_REL) { continue; } - sec_symtab = shdr[i].sh_link; - sec_applies = shdr[i].sh_info; - if (!(shdr[sec_applies].sh_flags & SHF_ALLOC)) { + sec_symtab = sec->link; + sec_applies = &secs[sec->shdr.sh_info]; + if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) { continue; } - sh_symtab = symtab[sec_symtab]; - sym_strtab = strtab[shdr[sec_symtab].sh_link]; - for(j = 0; j < shdr[i].sh_size/sizeof(reltab[0][0]); j++) { + sh_symtab = sec_symtab->symtab; + sym_strtab = sec_symtab->link->strtab; + for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) { Elf32_Rel *rel; Elf32_Sym *sym; const char *name; - rel = &reltab[i][j]; + rel = &sec->reltab[j]; sym = &sh_symtab[ELF32_R_SYM(rel->r_info)]; name = sym_name(sym_strtab, sym); if (sym->st_shndx != SHN_ABS) { @@ -456,26 +476,28 @@ static void walk_relocs(void (*visit)(Elf32_Rel *rel, Elf32_Sym *sym)) { int i; /* Walk through the relocations */ - for(i = 0; i < ehdr.e_shnum; i++) { + for (i = 0; i < ehdr.e_shnum; i++) { char *sym_strtab; Elf32_Sym *sh_symtab; - unsigned sec_applies, sec_symtab; + struct section *sec_applies, *sec_symtab; int j; - if (shdr[i].sh_type != SHT_REL) { + struct section *sec = &secs[i]; + + if (sec->shdr.sh_type != SHT_REL) { continue; } - sec_symtab = shdr[i].sh_link; - sec_applies = shdr[i].sh_info; - if (!(shdr[sec_applies].sh_flags & SHF_ALLOC)) { + sec_symtab = sec->link; + sec_applies = &secs[sec->shdr.sh_info]; + if (!(sec_applies->shdr.sh_flags & SHF_ALLOC)) { continue; } - sh_symtab = symtab[sec_symtab]; - sym_strtab = strtab[shdr[sec_symtab].sh_link]; - for(j = 0; j < shdr[i].sh_size/sizeof(reltab[0][0]); j++) { + sh_symtab = sec_symtab->symtab; + sym_strtab = sec->link->strtab; + for (j = 0; j < sec->shdr.sh_size/sizeof(Elf32_Rel); j++) { Elf32_Rel *rel; Elf32_Sym *sym; unsigned r_type; - rel = &reltab[i][j]; + rel = &sec->reltab[j]; sym = &sh_symtab[ELF32_R_SYM(rel->r_info)]; r_type = ELF32_R_TYPE(rel->r_info); /* Don't visit relocations to absolute symbols */ @@ -539,7 +561,7 @@ static void emit_relocs(int as_text) */ printf(".section \".data.reloc\",\"a\"\n"); printf(".balign 4\n"); - for(i = 0; i < reloc_count; i++) { + for (i = 0; i < reloc_count; i++) { printf("\t .long 0x%08lx\n", relocs[i]); } printf("\n"); @@ -550,7 +572,7 @@ static void emit_relocs(int as_text) /* Print a stop */ printf("%c%c%c%c", buf[0], buf[1], buf[2], buf[3]); /* Now print each relocation */ - for(i = 0; i < reloc_count; i++) { + for (i = 0; i < reloc_count; i++) { buf[0] = (relocs[i] >> 0) & 0xff; buf[1] = (relocs[i] >> 8) & 0xff; buf[2] = (relocs[i] >> 16) & 0xff; @@ -577,7 +599,7 @@ int main(int argc, char **argv) show_absolute_relocs = 0; as_text = 0; fname = NULL; - for(i = 1; i < argc; i++) { + for (i = 1; i < argc; i++) { char *arg = argv[i]; if (*arg == '-') { if (strcmp(argv[1], "--abs-syms") == 0) { -- cgit v1.2.3 From a91a03ee31a5c29a934708b7cf37bb8da516d016 Mon Sep 17 00:00:00 2001 From: Eric B Munson Date: Tue, 1 Jul 2008 02:12:13 +1000 Subject: powerpc: Keep 3 high personality bytes across exec Currently when a 32 bit process is exec'd on a powerpc 64 bit host the value in the top three bytes of the personality is clobbered. patch adds a check in the SET_PERSONALITY macro that will carry all the values in the top three bytes across the exec. These three bytes currently carry flags to disable address randomisation, limit the address space, force zeroing of an mmapped page, etc. Should an application set any of these bits they will be maintained and honoured on homogeneous environment but discarded and ignored on a heterogeneous environment. So if an application requires all mmapped pages to be initialised to zero and a wrapper is used to setup the personality and exec the target, these flags will remain set on an all 32 or all 64 bit envrionment, but they will be lost in the exec on a mixed 32/64 bit environment. Losing these bits means that the same application would behave differently in different environments. Tested on a POWER5+ machine with 64bit kernel and a mixed 64/32 bit user space. Signed-off-by: Eric B Munson Signed-off-by: Paul Mackerras --- include/asm-powerpc/elf.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h index 746e53d60cbe..b6a874db801d 100644 --- a/include/asm-powerpc/elf.h +++ b/include/asm-powerpc/elf.h @@ -255,7 +255,8 @@ do { \ else \ clear_thread_flag(TIF_ABI_PENDING); \ if (personality(current->personality) != PER_LINUX32) \ - set_personality(PER_LINUX); \ + set_personality(PER_LINUX | \ + (current->personality & (~PER_MASK))); \ } while (0) /* * An executable for which elf_read_implies_exec() returns TRUE will -- cgit v1.2.3 From 436db693c4f4d02d375780a1f0b2ebdca2451cd6 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 1 Jul 2008 14:01:39 +1000 Subject: powerpc: Fix compile error for CONFIG_VSX Fix compile error when CONFIG_VSX is enabled. arch/powerpc/kernel/signal_64.c: In function 'restore_sigcontext': arch/powerpc/kernel/signal_64.c:241: error: 'i' undeclared (first use in this function) Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/signal_64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 6e6b01a6db5f..8214e57aab67 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -167,6 +167,7 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, #endif #ifdef CONFIG_VSX double buf[FP_REGS_SIZE]; + int i; #endif unsigned long err = 0; unsigned long save_r13 = 0; -- cgit v1.2.3 From f3e909c2750eb20536bacacc867dc9047b70546a Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 1 Jul 2008 14:01:39 +1000 Subject: powerpc: Update for VSX core file and ptrace This correctly hooks the VSX dump into Roland McGrath core file infrastructure. It adds the VSX dump information as an additional elf note in the core file (after talking more to the tool chain/gdb guys). This also ensures the formats are consistent between signals, ptrace and core files. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/process.c | 19 +------------------ arch/powerpc/kernel/ptrace.c | 21 +++++++++++++-------- include/asm-powerpc/elf.h | 4 ++-- include/linux/elf.h | 1 + 4 files changed, 17 insertions(+), 28 deletions(-) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index d52ded366f14..1924b57bd241 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -162,7 +162,7 @@ void flush_altivec_to_thread(struct task_struct *tsk) } } -int dump_task_altivec(struct task_struct *tsk, elf_vrreg_t *vrregs) +int dump_task_altivec(struct task_struct *tsk, elf_vrregset_t *vrregs) { /* ELF_NVRREG includes the VSCR and VRSAVE which we need to save * separately, see below */ @@ -249,23 +249,6 @@ int dump_task_vsx(struct task_struct *tsk, elf_vrreg_t *vrregs) } #endif /* CONFIG_VSX */ -int dump_task_vector(struct task_struct *tsk, elf_vrregset_t *vrregs) -{ - int rc = 0; - elf_vrreg_t *regs = (elf_vrreg_t *)vrregs; -#ifdef CONFIG_ALTIVEC - rc = dump_task_altivec(tsk, regs); - if (rc) - return rc; - regs += ELF_NVRREG; -#endif - -#ifdef CONFIG_VSX - rc = dump_task_vsx(tsk, regs); -#endif - return rc; -} - #ifdef CONFIG_SPE void enable_kernel_spe(void) diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index 4e203a89e189..8feb93e7890c 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -368,13 +368,15 @@ static int vsr_get(struct task_struct *target, const struct user_regset *regset, unsigned int pos, unsigned int count, void *kbuf, void __user *ubuf) { - int ret; + double buf[32]; + int ret, i; flush_vsx_to_thread(target); + for (i = 0; i < 32 ; i++) + buf[i] = current->thread.fpr[i][TS_VSRLOWOFFSET]; ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, - target->thread.fpr, 0, - 32 * sizeof(vector128)); + buf, 0, 32 * sizeof(double)); return ret; } @@ -383,13 +385,16 @@ static int vsr_set(struct task_struct *target, const struct user_regset *regset, unsigned int pos, unsigned int count, const void *kbuf, const void __user *ubuf) { - int ret; + double buf[32]; + int ret,i; flush_vsx_to_thread(target); ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - target->thread.fpr, 0, - 32 * sizeof(vector128)); + buf, 0, 32 * sizeof(double)); + for (i = 0; i < 32 ; i++) + current->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i]; + return ret; } @@ -499,8 +504,8 @@ static const struct user_regset native_regsets[] = { #endif #ifdef CONFIG_VSX [REGSET_VSX] = { - .n = 32, - .size = sizeof(vector128), .align = sizeof(vector128), + .core_note_type = NT_PPC_VSX, .n = 32, + .size = sizeof(double), .align = sizeof(double), .active = vsr_active, .get = vsr_get, .set = vsr_set }, #endif diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h index b6a874db801d..38a51728406f 100644 --- a/include/asm-powerpc/elf.h +++ b/include/asm-powerpc/elf.h @@ -221,8 +221,8 @@ extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); typedef elf_vrregset_t elf_fpxregset_t; #ifdef CONFIG_ALTIVEC -extern int dump_task_vector(struct task_struct *, elf_vrregset_t *vrregs); -#define ELF_CORE_COPY_XFPREGS(tsk, regs) dump_task_vector(tsk, regs) +extern int dump_task_altivec(struct task_struct *, elf_vrregset_t *vrregs); +#define ELF_CORE_COPY_XFPREGS(tsk, regs) dump_task_altivec(tsk, regs) #define ELF_CORE_XFPREG_TYPE NT_PPC_VMX #endif diff --git a/include/linux/elf.h b/include/linux/elf.h index ff9fbed90123..edc3dac3f02f 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -358,6 +358,7 @@ typedef struct elf64_shdr { #define NT_PRXFPREG 0x46e62b7f /* copied from gdb5.1/include/elf/common.h */ #define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */ #define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */ +#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */ #define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ -- cgit v1.2.3 From 619b0488038224391e64fa03854651ca0f5efe56 Mon Sep 17 00:00:00 2001 From: Raistlin Date: Thu, 26 Jun 2008 18:54:09 +0200 Subject: sched: fix divide error when trying to configure rt_period to zero Here it is another little Oops we found while configuring invalid values via cgroups: echo 0 > /dev/cgroups/0/cpu.rt_period_us or echo 4294967296 > /dev/cgroups/0/cpu.rt_period_us [ 205.509825] divide error: 0000 [#1] [ 205.510151] Modules linked in: [ 205.510151] [ 205.510151] Pid: 2339, comm: bash Not tainted (2.6.26-rc8 #33) [ 205.510151] EIP: 0060:[] EFLAGS: 00000293 CPU: 0 [ 205.510151] EIP is at div64_u64+0x5f/0x70 [ 205.510151] EAX: 0000389f EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 205.510151] ESI: d9800000 EDI: 00000000 EBP: c6cede60 ESP: c6cede50 [ 205.510151] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 205.510151] Process bash (pid: 2339, ti=c6cec000 task=c79be370 task.ti=c6cec000) [ 205.510151] Stack: d9800000 0000389f c05971a0 d9800000 c6cedeb4 c0214dbd 00000000 00000000 [ 205.510151] c6cede88 c0242bd8 c05377c0 c7a41b40 00000000 00000000 00000000 c05971a0 [ 205.510151] c780ed20 c7508494 c7a41b40 00000000 00000002 c6cedebc c05971a0 ffffffea [ 205.510151] Call Trace: [ 205.510151] [] ? __rt_schedulable+0x1cd/0x240 [ 205.510151] [] ? cgroup_file_open+0x18/0xe0 [ 205.510151] [] ? tg_set_bandwidth+0xa4/0xf0 [ 205.510151] [] ? sched_group_set_rt_period+0x36/0x50 [ 205.510151] [] ? cpu_rt_period_write_uint+0xe/0x10 [ 205.510151] [] ? cgroup_file_write+0x125/0x160 [ 205.510151] [] ? hrtimer_interrupt+0x155/0x190 [ 205.510151] [] ? security_file_permission+0xf/0x20 [ 205.510151] [] ? rw_verify_area+0x48/0xc0 [ 205.510151] [] ? dupfd+0x104/0x130 [ 205.510151] [] ? vfs_write+0x9c/0x160 [ 205.510151] [] ? cgroup_file_write+0x0/0x160 [ 205.510151] [] ? sys_write+0x3d/0x70 [ 205.510151] [] ? sysenter_past_esp+0x6a/0x91 [ 205.510151] ======================= [ 205.510151] Code: 0f 45 de 31 f6 0f ad d0 d3 ea f6 c1 20 0f 45 c2 0f 45 d6 89 45 f0 89 55 f4 8b 55 f4 31 c9 8b 45 f0 39 d3 89 c6 77 08 89 d0 31 d2 f3 89 c1 83 c4 08 89 f0 f7 f3 89 ca 5b 5e 5d c3 55 89 e5 56 [ 205.510151] EIP: [] div64_u64+0x5f/0x70 SS:ESP 0068:c6cede50 The attached patch solves the issue for me. I'm checking as soon as possible for the period not being zero since, if it is, going ahead is useless. This way we also save a mutex_lock() and a read_lock() wrt doing it inside tg_set_bandwidth() or __rt_schedulable(). Signed-off-by: Dario Faggioli Signed-off-by: Michael Trimarchi Signed-off-by: Ingo Molnar --- kernel/sched.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index a66e85639de2..94ead43eda62 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -8502,6 +8502,9 @@ int sched_group_set_rt_period(struct task_group *tg, long rt_period_us) rt_period = (u64)rt_period_us * NSEC_PER_USEC; rt_runtime = tg->rt_bandwidth.rt_runtime; + if (rt_period == 0) + return -EINVAL; + return tg_set_bandwidth(tg, rt_period, rt_runtime); } -- cgit v1.2.3 From efac41894df57d32b483ac622d03541b5b2692c0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 1 Jul 2008 08:56:32 +0200 Subject: x86: fix NODES_SHIFT Kconfig range commit 4323838215184f5a2f081e0d17b8d60731b03164 x86: change size of node ids from u8 to s16 set the range for NODES_SHIFT to 1..15. The possible range is 1..9 Fixes Bugzilla #10726 Reported-by: Dave Jones Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 52e18e6d2ba0..8a07f417f5f4 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -961,8 +961,8 @@ config NUMA_EMU number of nodes. This is only useful for debugging. config NODES_SHIFT - int "Max num nodes shift(1-15)" - range 1 15 if X86_64 + int "Max num nodes shift(1-9)" + range 1 9 if X86_64 default "6" if X86_64 default "4" if X86_NUMAQ default "3" -- cgit v1.2.3 From d585d0b9d73ed999cc7b8cf3cac4a5b01abb544e Mon Sep 17 00:00:00 2001 From: Divyesh Shah Date: Mon, 16 Jun 2008 18:37:08 +0200 Subject: block: Fix the starving writes bug in the anticipatory IO scheduler AS scheduler alternates between issuing read and write batches. It does the batch switch only after all requests from the previous batch are completed. When switching to a write batch, if there is an on-going read request, it waits for its completion and indicates its intention of switching by setting ad->changed_batch and the new direction but does not update the batch_expire_time for the new write batch which it does in the case of no previous pending requests. On completion of the read request, it sees that we were waiting for the switch and schedules work for kblockd right away and resets the ad->changed_data flag. Now when kblockd enters dispatch_request where it is expected to pick up a write request, it in turn ends the write batch because the batch_expire_timer was not updated and shows the expire timestamp for the previous batch. This results in the write starvation for all the cases where there is the intention for switching to a write batch, but there is a previous in-flight read request and the batch gets reverted to a read_batch right away. This also holds true in the reverse case (switching from a write batch to a read batch with an in-flight write request). I've checked that this bug exists on 2.6.11, 2.6.18, 2.6.24 and linux-2.6-block git HEAD. I've tested the fix on x86 platforms with SCSI drives where the driver asks for the next request while a current request is in-flight. This patch is based off linux-2.6-block git HEAD. Bug reproduction: A simple scenario which reproduces this bug is: - dd if=/dev/hda3 of=/dev/null & - lilo The lilo takes forever to complete. This can also be reproduced fairly easily with the earlier dd and another test program doing msync(). The example test program below should print out a message after every iteration but it simply hangs forever. With this bugfix it makes forward progress. ==== Example test program using msync() (thanks to suleiman AT google DOT com) inline uint64_t rdtsc(void) { int64_t tsc; __asm __volatile("rdtsc" : "=A" (tsc)); return (tsc); } int main(int argc, char **argv) { struct stat st; uint64_t e, s, t; char *p, q; long i; int fd; if (argc < 2) { printf("Usage: %s \n", argv[0]); return (1); } if ((fd = open(argv[1], O_RDWR | O_NOATIME)) < 0) err(1, "open"); if (fstat(fd, &st) < 0) err(1, "fstat"); p = mmap(NULL, st.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); t = 0; for (i = 0; i < 1000; i++) { *p = 0; msync(p, 4096, MS_SYNC); s = rdtsc(); *p = 0; __asm __volatile(""::: "memory"); e = rdtsc(); if (argc > 2) printf("%d: %lld cycles %jd %jd\n", i, e - s, (intmax_t)s, (intmax_t)e); t += e - s; } printf("average time: %lld cycles\n", t / 1000); return (0); } Cc: Acked-by: Nick Piggin Signed-off-by: Jens Axboe --- block/as-iosched.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/block/as-iosched.c b/block/as-iosched.c index 8c3946787dbb..743f33a01a07 100644 --- a/block/as-iosched.c +++ b/block/as-iosched.c @@ -831,6 +831,8 @@ static void as_completed_request(struct request_queue *q, struct request *rq) } if (ad->changed_batch && ad->nr_dispatched == 1) { + ad->current_batch_expires = jiffies + + ad->batch_expire[ad->batch_data_dir]; kblockd_schedule_work(&ad->antic_work); ad->changed_batch = 0; -- cgit v1.2.3 From 18ce3751ccd488c78d3827e9f6bf54e6322676fb Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 1 Jul 2008 09:07:34 +0200 Subject: Properly notify block layer of sync writes fsync_buffers_list() and sync_dirty_buffer() both issue async writes and then immediately wait on them. Conceptually, that makes them sync writes and we should treat them as such so that the IO schedulers can handle them appropriately. This patch fixes a write starvation issue that Lin Ming reported, where xx is stuck for more than 2 minutes because of a large number of synchronous IO in the system: INFO: task kjournald:20558 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald D ffff810010820978 6712 20558 2 ffff81022ddb1d10 0000000000000046 ffff81022e7baa10 ffffffff803ba6f2 ffff81022ecd0000 ffff8101e6dc9160 ffff81022ecd0348 000000008048b6cb 0000000000000086 ffff81022c4e8d30 0000000000000000 ffffffff80247537 Call Trace: [] kobject_get+0x12/0x17 [] getnstimeofday+0x2f/0x83 [] sync_buffer+0x0/0x3f [] io_schedule+0x5d/0x9f [] sync_buffer+0x3b/0x3f [] __wait_on_bit+0x40/0x6f [] sync_buffer+0x0/0x3f [] out_of_line_wait_on_bit+0x6c/0x78 [] wake_bit_function+0x0/0x23 [] sync_dirty_buffer+0x98/0xcb [] journal_commit_transaction+0x97d/0xcb6 [] lock_timer_base+0x26/0x4b [] kjournald+0xc1/0x1fb [] autoremove_wake_function+0x0/0x2e [] kjournald+0x0/0x1fb [] kthread+0x47/0x74 [] schedule_tail+0x28/0x5d [] child_rip+0xa/0x12 [] kthread+0x0/0x74 [] child_rip+0x0/0x12 Lin Ming confirms that this patch fixes the issue. I've run tests with it for the past week and no ill effects have been observed, so I'm proposing it for inclusion into 2.6.26. Signed-off-by: Jens Axboe --- fs/buffer.c | 13 ++++++++----- include/linux/fs.h | 1 + 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/fs/buffer.c b/fs/buffer.c index a073f3f4f013..0f51c0f7c266 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -821,7 +821,7 @@ static int fsync_buffers_list(spinlock_t *lock, struct list_head *list) * contents - it is a noop if I/O is still in * flight on potentially older contents. */ - ll_rw_block(SWRITE, 1, &bh); + ll_rw_block(SWRITE_SYNC, 1, &bh); brelse(bh); spin_lock(lock); } @@ -2940,16 +2940,19 @@ void ll_rw_block(int rw, int nr, struct buffer_head *bhs[]) for (i = 0; i < nr; i++) { struct buffer_head *bh = bhs[i]; - if (rw == SWRITE) + if (rw == SWRITE || rw == SWRITE_SYNC) lock_buffer(bh); else if (test_set_buffer_locked(bh)) continue; - if (rw == WRITE || rw == SWRITE) { + if (rw == WRITE || rw == SWRITE || rw == SWRITE_SYNC) { if (test_clear_buffer_dirty(bh)) { bh->b_end_io = end_buffer_write_sync; get_bh(bh); - submit_bh(WRITE, bh); + if (rw == SWRITE_SYNC) + submit_bh(WRITE_SYNC, bh); + else + submit_bh(WRITE, bh); continue; } } else { @@ -2978,7 +2981,7 @@ int sync_dirty_buffer(struct buffer_head *bh) if (test_clear_buffer_dirty(bh)) { get_bh(bh); bh->b_end_io = end_buffer_write_sync; - ret = submit_bh(WRITE, bh); + ret = submit_bh(WRITE_SYNC, bh); wait_on_buffer(bh); if (buffer_eopnotsupp(bh)) { clear_buffer_eopnotsupp(bh); diff --git a/include/linux/fs.h b/include/linux/fs.h index 7c1080826832..d8e2762ed14d 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -83,6 +83,7 @@ extern int dir_notify_enable; #define READ_SYNC (READ | (1 << BIO_RW_SYNC)) #define READ_META (READ | (1 << BIO_RW_META)) #define WRITE_SYNC (WRITE | (1 << BIO_RW_SYNC)) +#define SWRITE_SYNC (SWRITE | (1 << BIO_RW_SYNC)) #define WRITE_BARRIER ((1 << BIO_RW) | (1 << BIO_RW_BARRIER)) #define SEL_IN 1 -- cgit v1.2.3 From 8558f8f81680a43d383abd1b5f23d3501fedfa65 Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Fri, 27 Jun 2008 10:17:38 +0530 Subject: rcu: fix hotplug vs rcu race Dhaval Giani reported this warning during cpu hotplug stress-tests: | On running kernel compiles in parallel with cpu hotplug: | | WARNING: at arch/x86/kernel/smp.c:118 | native_smp_send_reschedule+0x21/0x36() | Modules linked in: | Pid: 27483, comm: cc1 Not tainted 2.6.26-rc7 #1 | [...] | [] native_smp_send_reschedule+0x21/0x36 | [] force_quiescent_state+0x47/0x57 | [] call_rcu+0x51/0x6d | [] __fput+0x130/0x158 | [] fput+0x17/0x19 | [] filp_close+0x4d/0x57 | [] sys_close+0x5c/0x97 IMHO the warning is a spurious one. cpu_online_map is updated by the _cpu_down() using stop_machine_run(). Since force_quiescent_state is invoked from irqs disabled section, stop_machine_run() won't be executing while a cpu is executing force_quiescent_state(). Hence the cpu_online_map is stable while we're in the irq disabled section. However, a cpu might have been offlined _just_ before we disabled irqs while entering force_quiescent_state(). And rcu subsystem might not yet have handled the CPU_DEAD notification, leading to the offlined cpu's bit being set in the rcp->cpumask. Hence cpumask = (rcp->cpumask & cpu_online_map) to prevent sending smp_reschedule() to an offlined CPU. Here's the timeline: CPU_A CPU_B -------------------------------------------------------------- cpu_down(): . . . . . stop_machine(): /* disables preemption, . * and irqs */ . . . . . take_cpu_down(); . . . . . . . cpu_disable(); /*this removes cpu . *from cpu_online_map . */ . . . . . restart_machine(); /* enables irqs */ . ------WINDOW DURING WHICH rcp->cpumask is stale --------------- . call_rcu(); . /* disables irqs here */ . .force_quiescent_state(); .CPU_DEAD: .for_each_cpu(rcp->cpumask) . . smp_send_reschedule(); . . . . WARN_ON() for offlined CPU! . . . rcu_cpu_notify: . -------- WINDOW ENDS ------------------------------------------ rcu_offline_cpu() /* Which calls cpu_quiet() * which removes * cpu from rcp->cpumask. */ If a new batch was started just before calling stop_machine_run(), the "tobe-offlined" cpu is still present in rcp-cpumask. During a cpu-offline, from take_cpu_down(), we queue an rt-prio idle task as the next task to be picked by the scheduler. We also call cpu_disable() which will disable any further interrupts and remove the cpu's bit from the cpu_online_map. Once the stop_machine_run() successfully calls take_cpu_down(), it calls schedule(). That's the last time a schedule is called on the offlined cpu, and hence the last time when rdp->passed_quiesc will be set to 1 through rcu_qsctr_inc(). But the cpu_quiet() will be on this cpu will be called only when the next RCU_SOFTIRQ occurs on this CPU. So at this time, the offlined CPU is still set in rcp->cpumask. Now coming back to the idle_task which truely offlines the CPU, it does check for a pending RCU and raises the softirq, since it will find rdp->passed_quiesc to be 0 in this case. However, since the cpu is offline I am not sure if the softirq will trigger on the CPU. Even if it doesn't the rcu_offline_cpu() will find that rcp->completed is not the same as rcp->cur, which means that our cpu could be holding up the grace period progression. Hence we call cpu_quiet() and move ahead. But because of the window explained in the timeline, we could still have a call_rcu() before the RCU subsystem executes it's CPU_DEAD notification, and we send smp_send_reschedule() to offlined cpu while trying to force the quiescent states. The appended patch adds comments and prevents checking for offlined cpu everytime. cpu_online_map is updated by the _cpu_down() using stop_machine_run(). Since force_quiescent_state is invoked from irqs disabled section, stop_machine_run() won't be executing while a cpu is executing force_quiescent_state(). Hence the cpu_online_map is stable while we're in the irq disabled section. Reported-by: Dhaval Giani Signed-off-by: Gautham R Shenoy Acked-by: Dhaval Giani Cc: Dipankar Sarma Cc: laijs@cn.fujitsu.com Cc: Peter Zijlstra Cc: Rusty Russel Cc: "Paul E. McKenney" Signed-off-by: Ingo Molnar --- kernel/rcuclassic.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c index f4ffbd0f306f..a38895a5b8e2 100644 --- a/kernel/rcuclassic.c +++ b/kernel/rcuclassic.c @@ -89,8 +89,22 @@ static void force_quiescent_state(struct rcu_data *rdp, /* * Don't send IPI to itself. With irqs disabled, * rdp->cpu is the current cpu. + * + * cpu_online_map is updated by the _cpu_down() + * using stop_machine_run(). Since we're in irqs disabled + * section, stop_machine_run() is not exectuting, hence + * the cpu_online_map is stable. + * + * However, a cpu might have been offlined _just_ before + * we disabled irqs while entering here. + * And rcu subsystem might not yet have handled the CPU_DEAD + * notification, leading to the offlined cpu's bit + * being set in the rcp->cpumask. + * + * Hence cpumask = (rcp->cpumask & cpu_online_map) to prevent + * sending smp_reschedule() to an offlined CPU. */ - cpumask = rcp->cpumask; + cpus_and(cpumask, rcp->cpumask, cpu_online_map); cpu_clear(rdp->cpu, cpumask); for_each_cpu_mask(cpu, cpumask) smp_send_reschedule(cpu); -- cgit v1.2.3 From 3e61e0c976532a542b23bbb74c8f631815171078 Mon Sep 17 00:00:00 2001 From: Pekka Paalanen Date: Mon, 30 Jun 2008 23:48:37 +0300 Subject: mmiotrace broken in linux-next (8-bit writes only) The moment mmiotrace is enabled, I hit a NULL deref in: IP: [] __trace_special+0x17c/0x23a Call Trace: [] ftrace_special+0x6f/0x9a [] down+0x19/0x4a [] acquire_console_sem+0x42/0x58 [] con_flush_chars+0x28/0x43 [] write_chan+0x22e/0x334 [] ? default_wake_function+0x0/0xf [] tty_write+0x195/0x228 [] ? write_chan+0x0/0x334 [] vfs_write+0xae/0x137 [] sys_write+0x47/0x70 [] system_call_after_swapgs+0x7b/0x80 which means 'entry' in __trace_special() is NULL. [ mingo@elte.hu: that ftrace_special() was a leftover. ] Signed-off-by: Pekka Paalanen Cc: Steven Rostedt Cc: proski@gnu.org Cc: "Vegard Nossum" Signed-off-by: Ingo Molnar --- kernel/semaphore.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/semaphore.c b/kernel/semaphore.c index 1a064adab658..aaaeae8244e7 100644 --- a/kernel/semaphore.c +++ b/kernel/semaphore.c @@ -54,7 +54,6 @@ void down(struct semaphore *sem) { unsigned long flags; - ftrace_special(sem->count, 0, __LINE__); spin_lock_irqsave(&sem->lock, flags); if (likely(sem->count > 0)) sem->count--; -- cgit v1.2.3 From 2ee2394b682c0ee99b0f083abe6c57727e6edb69 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 30 Jun 2008 15:42:47 -0700 Subject: x86: fix regression: boot failure on AMD Elan TS-5500 Jeremy Fitzhardinge wrote: > > Maybe it really does require the far jump immediately after setting PE > in cr0... > > Hm, I don't remember this paragraph being in vol 3a, section 8.9.1 > before. Is it a recent addition? > > Random failures can occur if other instructions exist between steps > 3 and 4 above. Failures will be readily seen in some situations, > such as when instructions that reference memory are inserted between > steps 3 and 4 while in system management mode. > I don't remember that, either. Signed-off-by: Ingo Molnar --- arch/x86/boot/pmjump.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/boot/pmjump.S b/arch/x86/boot/pmjump.S index ab049d40a884..141b6e20ed31 100644 --- a/arch/x86/boot/pmjump.S +++ b/arch/x86/boot/pmjump.S @@ -33,6 +33,8 @@ protected_mode_jump: movw %cs, %bx shll $4, %ebx addl %ebx, 2f + jmp 1f # Short jump to serialize on 386/486 +1: movw $__BOOT_DS, %cx movw $__BOOT_TSS, %di @@ -40,8 +42,6 @@ protected_mode_jump: movl %cr0, %edx orb $X86_CR0_PE, %dl # Protected mode movl %edx, %cr0 - jmp 1f # Short jump to serialize on 386/486 -1: # Transition to 32-bit mode .byte 0x66, 0xea # ljmpl opcode -- cgit v1.2.3 From 45fdc3a7624a4a48185a04ae0abab5f9793d8952 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Mon, 30 Jun 2008 14:02:41 -0700 Subject: x86 ptrace: fix PTRACE_GETFPXREGS error ptrace has always returned only -EIO for all failures to access registers. The user_regset calls are allowed to return a more meaningful variety of errors. The REGSET_XFP calls use -ENODEV for !cpu_has_fxsr hardware. Make ptrace return the traditional -EIO instead of the error code from the user_regset call. Signed-off-by: Roland McGrath Cc: stable@kernel.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/i387.c | 4 ++-- arch/x86/kernel/ptrace.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 95e80e5033c3..eb9ddd8efb82 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -162,7 +162,7 @@ int xfpregs_get(struct task_struct *target, const struct user_regset *regset, int ret; if (!cpu_has_fxsr) - return -EIO; + return -ENODEV; ret = init_fpu(target); if (ret) @@ -179,7 +179,7 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset, int ret; if (!cpu_has_fxsr) - return -EIO; + return -ENODEV; ret = init_fpu(target); if (ret) diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index a7835f282936..77040b6070e1 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -943,13 +943,13 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return copy_regset_to_user(child, &user_x86_32_view, REGSET_XFP, 0, sizeof(struct user_fxsr_struct), - datap); + datap) ? -EIO : 0; case PTRACE_SETFPXREGS: /* Set the child extended FPU state. */ return copy_regset_from_user(child, &user_x86_32_view, REGSET_XFP, 0, sizeof(struct user_fxsr_struct), - datap); + datap) ? -EIO : 0; #endif #if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION -- cgit v1.2.3 From 2709781be6141798162f1089df728fb218a590df Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 11:59:41 +0100 Subject: I2C: S3C2410: Check ACK on byte transmission We should check for the reception of an ACK after transmitting each data byte. The address send has been correctly checking this, but the data write byte state should have also been checking for these failures. As part of the same fix, we remove the ACK checking from the receive path where it should not have been checking for an ACK which our hardware was sending. Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-s3c2410.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 1305ef190fc1..7ad22c53564d 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -323,7 +323,17 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * end of the message, and if so, work out what to do */ + if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) { + if (iicstat & S3C2410_IICSTAT_LASTBIT) { + dev_dbg(i2c->dev, "WRITE: No Ack\n"); + + s3c24xx_i2c_stop(i2c, -ECONNREFUSED); + goto out_ack; + } + } + retry_write: + if (!is_msgend(i2c)) { byte = i2c->msg->buf[i2c->msg_ptr++]; writeb(byte, i2c->regs + S3C2410_IICDS); @@ -377,17 +387,6 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * going to do any more read/write */ - if (!(i2c->msg->flags & I2C_M_IGNORE_NAK) && - !(is_msglast(i2c) && is_lastmsg(i2c))) { - - if (iicstat & S3C2410_IICSTAT_LASTBIT) { - dev_dbg(i2c->dev, "READ: No Ack\n"); - - s3c24xx_i2c_stop(i2c, -ECONNREFUSED); - goto out_ack; - } - } - byte = readb(i2c->regs + S3C2410_IICDS); i2c->msg->buf[i2c->msg_ptr++] = byte; -- cgit v1.2.3 From 63f5c2891eae6b4dd0538ef094e5f256d6150d7b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 11:59:42 +0100 Subject: I2C: S3C2410: Fixup error codes returned rom a transfer. The driver should be returning -ENXIO for transfers that do not pass the initial address byte stage. Note, also small tidyups to the driver comments in the area. Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-s3c2410.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 7ad22c53564d..d2645da79a5a 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -290,12 +290,12 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * bus, or started a new i2c message */ - if (iicstat & S3C2410_IICSTAT_LASTBIT && + if (iicstat & S3C2410_IICSTAT_LASTBIT && !(i2c->msg->flags & I2C_M_IGNORE_NAK)) { /* ack was not received... */ dev_dbg(i2c->dev, "ack was not received\n"); - s3c24xx_i2c_stop(i2c, -EREMOTEIO); + s3c24xx_i2c_stop(i2c, -ENXIO); goto out_ack; } @@ -305,7 +305,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) i2c->state = STATE_WRITE; /* terminate the transfer if there is nothing to do - * (used by the i2c probe to find devices */ + * as this is used by the i2c probe to find devices. */ if (is_lastmsg(i2c) && i2c->msg->len == 0) { s3c24xx_i2c_stop(i2c, 0); -- cgit v1.2.3 From d150a4bbd0e5c6427e66086b139953428680160b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 11:59:43 +0100 Subject: I2C: S3C2410: Add MODULE_ALIAS() for s3c2440 device. Add a MODULE_ALIAS() statement for the i2c-s3c2410 controller to ensure that it can be autoloaded on the S3C2440 systems that we support. Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-s3c2410.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index d2645da79a5a..9e8c875437be 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -948,3 +948,4 @@ MODULE_DESCRIPTION("S3C24XX I2C Bus driver"); MODULE_AUTHOR("Ben Dooks, "); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:s3c2410-i2c"); +MODULE_ALIAS("platform:s3c2440-i2c"); -- cgit v1.2.3 From f294a8ce211bed7bfaca19bef21376a86200c421 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 1 Jul 2008 15:38:13 +0200 Subject: x86: small unifications of address printing 'man 3 printf' tells me that %p should be printed as if by %#x, but this is not true for the kernel, which does not use the '0x' prefix for the %p conversion specifier. A small cast to (void *) is also prettier than #ifdef/#else/#endif. Signed-off-by: Vegard Nossum Signed-off-by: Ingo Molnar --- arch/x86/mm/fault.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 8bcb6f40ccb6..0eb70d1dd1f9 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -396,11 +396,7 @@ static void show_fault_oops(struct pt_regs *regs, unsigned long error_code, printk(KERN_CONT "NULL pointer dereference"); else printk(KERN_CONT "paging request"); -#ifdef CONFIG_X86_32 - printk(KERN_CONT " at %08lx\n", address); -#else - printk(KERN_CONT " at %016lx\n", address); -#endif + printk(KERN_CONT " at %p\n", (void *) address); printk(KERN_ALERT "IP:"); printk_address(regs->ip, 1); dump_pagetable(address); @@ -800,14 +796,10 @@ bad_area_nosemaphore: if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) && printk_ratelimit()) { printk( -#ifdef CONFIG_X86_32 - "%s%s[%d]: segfault at %lx ip %08lx sp %08lx error %lx", -#else - "%s%s[%d]: segfault at %lx ip %lx sp %lx error %lx", -#endif + "%s%s[%d]: segfault at %lx ip %p sp %p error %lx", task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG, - tsk->comm, task_pid_nr(tsk), address, regs->ip, - regs->sp, error_code); + tsk->comm, task_pid_nr(tsk), address, + (void *) regs->ip, (void *) regs->sp, error_code); print_vma_addr(" in ", regs->ip); printk("\n"); } -- cgit v1.2.3 From 760378e1497841246ea7e42abad617d8a8ac0bcc Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 1 Jul 2008 17:35:06 +0200 Subject: fix "ftrace: store mcount address in rec->ip" Alexander Beregalov reported this build failure: $ make CROSS_COMPILE=sparc64-unknown-linux-gnu- image modules && sudo make modules_install CHK include/linux/version.h CHK include/linux/utsrelease.h CALL scripts/checksyscalls.sh CHK include/linux/compile.h dnsdomainname: Unknown host CC arch/sparc64/kernel/sparc64_ksyms.o arch/sparc64/kernel/sparc64_ksyms.c:116: error: '_mcount' undeclared here (not in a function) cc1: warnings being treated as errors arch/sparc64/kernel/sparc64_ksyms.c:116: error: type defaults to 'int' in declaration of '_mcount' And bisected it back to: | commit 395a59d0f8e86bb39cd700c3d185d30c670bb958 | Author: Abhishek Sagar | Date: Sat Jun 21 23:47:27 2008 +0530 | | ftrace: store mcount address in rec->ip the mcount prototype is only available under CONFIG_FTRACE, extend it to CONFIG_MCOUNT as well. Reported-and-bisected-by: Alexander Beregalov Signed-off-by: Ingo Molnar --- arch/sparc64/kernel/sparc64_ksyms.c | 2 +- include/asm-sparc64/ftrace.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c index b80d982a29c6..49d3ea50c247 100644 --- a/arch/sparc64/kernel/sparc64_ksyms.c +++ b/arch/sparc64/kernel/sparc64_ksyms.c @@ -112,7 +112,7 @@ EXPORT_SYMBOL(__write_trylock); EXPORT_SYMBOL(smp_call_function); #endif /* CONFIG_SMP */ -#if defined(CONFIG_MCOUNT) +#ifdef CONFIG_MCOUNT EXPORT_SYMBOL(_mcount); #endif diff --git a/include/asm-sparc64/ftrace.h b/include/asm-sparc64/ftrace.h index f76a40a338bb..d27716cd38c1 100644 --- a/include/asm-sparc64/ftrace.h +++ b/include/asm-sparc64/ftrace.h @@ -1,7 +1,7 @@ #ifndef _ASM_SPARC64_FTRACE #define _ASM_SPARC64_FTRACE -#ifdef CONFIG_FTRACE +#ifdef CONFIG_MCOUNT #define MCOUNT_ADDR ((long)(_mcount)) #define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */ -- cgit v1.2.3 From a94c248113b86bbbc47d027a4004b70f2be298b1 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 1 Jul 2008 17:18:17 +0100 Subject: PCI: Restrict VPD read permission to root Some PCI devices will lock up if we attempt to read from VPD addresses beyond some device-dependent limit. Until we can identify these devices and adjust the file size accordingly, only let root read VPD through sysfs to prevent a DoS by normal users. Signed-off-by: Ben Hutchings Signed-off-by: Jesse Barnes --- drivers/pci/pci-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 6f3c7446c329..1f855f028e92 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -738,7 +738,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) pdev->vpd->attr = attr; attr->size = pdev->vpd->ops->get_size(pdev); attr->attr.name = "vpd"; - attr->attr.mode = S_IRUGO | S_IWUSR; + attr->attr.mode = S_IRUSR | S_IWUSR; attr->read = pci_read_vpd; attr->write = pci_write_vpd; retval = sysfs_create_bin_file(&pdev->dev.kobj, attr); -- cgit v1.2.3 From 5d1a04110bfc40a86e1387b5f4382addd9aa7fbb Mon Sep 17 00:00:00 2001 From: John Linn Date: Tue, 1 Jul 2008 14:17:18 -0600 Subject: powerpc/bootwrapper: update for initrd with simpleImage This change to the makefile corrects the build of a simpleImage with initrd. Signed-off-by: John Linn Signed-off-by: Grant Likely --- arch/powerpc/boot/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 1cee2f9fdf06..095e04db1c0e 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -273,7 +273,8 @@ endif initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-)) initrd-y := $(patsubst zImage%, zImage.initrd%, \ $(patsubst dtbImage%, dtbImage.initrd%, \ - $(patsubst treeImage%, treeImage.initrd%, $(image-y)))) + $(patsubst simpleImage%, simpleImage.initrd%, \ + $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) initrd-y := $(filter-out $(image-y), $(initrd-y)) targets += $(image-y) $(initrd-y) -- cgit v1.2.3 From 2260e63a2f313f416b31af80d02f02ef92d20d78 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 22:38:18 +0200 Subject: i2c: Documentation: fix device matching description The matching process described for new style clients in Documentation/i2c/writing-clients is classed as out-of-date as it requires the presence of an .id_table entry in the driver's i2c_driver entry. Signed-off-by: Ben Dooks Signed-off-by: Jean Delvare --- Documentation/i2c/writing-clients | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index ee75cbace28d..d4cd4126d1ad 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -25,12 +25,23 @@ routines, and should be zero-initialized except for fields with data you provide. A client structure holds device-specific information like the driver model device node, and its I2C address. +/* iff driver uses driver model ("new style") binding model: */ + +static struct i2c_device_id foo_idtable[] = { + { "foo", my_id_for_foo }, + { "bar", my_id_for_bar }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, foo_idtable); + static struct i2c_driver foo_driver = { .driver = { .name = "foo", }, /* iff driver uses driver model ("new style") binding model: */ + .id_table = foo_ids, .probe = foo_probe, .remove = foo_remove, @@ -173,10 +184,9 @@ handle may be used during foo_probe(). If foo_probe() reports success (zero not a negative status code) it may save the handle and use it until foo_remove() returns. That binding model is used by most Linux drivers. -Drivers match devices when i2c_client.driver_name and the driver name are -the same; this approach is used in several other busses that don't have -device typing support in the hardware. The driver and module name should -match, so hotplug/coldplug mechanisms will modprobe the driver. +The probe function is called when an entry in the id_table name field +matches the device's name. It is passed the entry that was matched so +the driver knows which one in the table matched. Device Creation (Standard driver model) -- cgit v1.2.3 From 8e29da9ee8958cc17e27f4053420f1c982614793 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 1 Jul 2008 22:38:18 +0200 Subject: i2c: Fix bad hint about irqs in i2c.h i2c.h mentions -1 as a not-issued irq. This false hint was taken by of_i2c and caused crashes. Don't give any advice as 'no irq' is not consistent across all architectures yet and it is not needed internally by the i2c-core. Signed-off-by: Wolfram Sang Signed-off-by: Jean Delvare --- include/linux/i2c.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index fb9af6a0fe9c..8dc730132192 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -171,7 +171,7 @@ struct i2c_client { struct i2c_adapter *adapter; /* the adapter we sit on */ struct i2c_driver *driver; /* and our access routines */ struct device dev; /* the device structure */ - int irq; /* irq issued by device (or -1) */ + int irq; /* irq issued by device */ struct list_head list; /* DEPRECATED */ struct completion released; }; -- cgit v1.2.3 From 1e6d1f260611387a7b4e6eae4d1dd6f62e53714d Mon Sep 17 00:00:00 2001 From: John Linn Date: Tue, 1 Jul 2008 10:52:41 -0700 Subject: powerpc/legacy_serial: Bail if reg-offset/shift properties are present The legacy serial driver does not work with an 8250 type UART that is described in the device tree with the reg-offset and reg-shift properties. This change makes legacy_serial ignore these devices. Signed-off-by: John Linn Signed-off-by: Grant Likely --- arch/powerpc/kernel/legacy_serial.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 61dd17449ddc..cf37f5ca4b71 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -136,6 +136,11 @@ static int __init add_legacy_soc_port(struct device_node *np, if (of_get_property(np, "clock-frequency", NULL) == NULL) return -1; + /* if reg-shift or offset, don't try to use it */ + if ((of_get_property(np, "reg-shift", NULL) != NULL) || + (of_get_property(np, "reg-offset", NULL) != NULL)) + return -1; + /* if rtas uses this device, don't try to use it as well */ if (of_get_property(np, "used-by-rtas", NULL) != NULL) return -1; -- cgit v1.2.3 From 18d76ac9a47742558bca3bbc2f7c41870ac744c8 Mon Sep 17 00:00:00 2001 From: Tim Yamin Date: Tue, 17 Jun 2008 09:33:14 +0100 Subject: powerpc/mpc5200: Fix lite5200b suspend/resume Suspend/resume ("echo mem > /sys/power/state") does not work with vanilla kernels -- the system does not suspend correctly and just hangs. This patch fixes this so suspend/resume works: 1) of_iomap does not map the whole 0xC000 of the MPC5200 immr so saving registers does not work. 2) PCI registers need to be saved and restored. Signed-off-by: Tim Yamin Signed-off-by: Grant Likely --- arch/powerpc/platforms/52xx/lite5200_pm.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/52xx/lite5200_pm.c b/arch/powerpc/platforms/52xx/lite5200_pm.c index 41c7fd91e99e..fe92e65103ed 100644 --- a/arch/powerpc/platforms/52xx/lite5200_pm.c +++ b/arch/powerpc/platforms/52xx/lite5200_pm.c @@ -14,6 +14,7 @@ static struct mpc52xx_sdma __iomem *bes; static struct mpc52xx_xlb __iomem *xlb; static struct mpc52xx_gpio __iomem *gps; static struct mpc52xx_gpio_wkup __iomem *gpw; +static void __iomem *pci; static void __iomem *sram; static const int sram_size = 0x4000; /* 16 kBytes */ static void __iomem *mbar; @@ -50,6 +51,8 @@ static int lite5200_pm_prepare(void) { .type = "builtin", .compatible = "mpc5200", }, /* efika */ {} }; + u64 regaddr64 = 0; + const u32 *regaddr_p; /* deep sleep? let mpc52xx code handle that */ if (lite5200_pm_target_state == PM_SUSPEND_STANDBY) @@ -60,8 +63,12 @@ static int lite5200_pm_prepare(void) /* map registers */ np = of_find_matching_node(NULL, immr_ids); - mbar = of_iomap(np, 0); + regaddr_p = of_get_address(np, 0, NULL, NULL); + if (regaddr_p) + regaddr64 = of_translate_address(np, regaddr_p); of_node_put(np); + + mbar = ioremap((u32) regaddr64, 0xC000); if (!mbar) { printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__); return -ENOSYS; @@ -71,6 +78,7 @@ static int lite5200_pm_prepare(void) pic = mbar + 0x500; gps = mbar + 0xb00; gpw = mbar + 0xc00; + pci = mbar + 0xd00; bes = mbar + 0x1200; xlb = mbar + 0x1f00; sram = mbar + 0x8000; @@ -85,6 +93,7 @@ static struct mpc52xx_sdma sbes; static struct mpc52xx_xlb sxlb; static struct mpc52xx_gpio sgps; static struct mpc52xx_gpio_wkup sgpw; +static char spci[0x200]; static void lite5200_save_regs(void) { @@ -94,6 +103,7 @@ static void lite5200_save_regs(void) _memcpy_fromio(&sxlb, xlb, sizeof(*xlb)); _memcpy_fromio(&sgps, gps, sizeof(*gps)); _memcpy_fromio(&sgpw, gpw, sizeof(*gpw)); + _memcpy_fromio(spci, pci, 0x200); _memcpy_fromio(saved_sram, sram, sram_size); } @@ -103,6 +113,8 @@ static void lite5200_restore_regs(void) int i; _memcpy_toio(sram, saved_sram, sram_size); + /* PCI Configuration */ + _memcpy_toio(pci, spci, 0x200); /* * GPIOs. Interrupt Master Enable has higher address then other -- cgit v1.2.3 From 77a538d5aa25a8866606a1faa4300c9aa2a59dfc Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 1 Jul 2008 17:22:48 -0700 Subject: ipv4: fix sysctl documentation of time related values These sysctl values are time related and all use the same routine (proc_dointvec_jiffies) that internally converts from seconds to jiffies. The code is fine, the documentation is just wrong. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 17a6e46fbd43..17f1f91af35c 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -81,23 +81,23 @@ inet_peer_minttl - INTEGER Minimum time-to-live of entries. Should be enough to cover fragment time-to-live on the reassembling side. This minimum time-to-live is guaranteed if the pool size is less than inet_peer_threshold. - Measured in jiffies(1). + Measured in seconds. inet_peer_maxttl - INTEGER Maximum time-to-live of entries. Unused entries will expire after this period of time if there is no memory pressure on the pool (i.e. when the number of entries in the pool is very small). - Measured in jiffies(1). + Measured in seconds. inet_peer_gc_mintime - INTEGER Minimum interval between garbage collection passes. This interval is in effect under high memory pressure on the pool. - Measured in jiffies(1). + Measured in seconds. inet_peer_gc_maxtime - INTEGER Minimum interval between garbage collection passes. This interval is in effect under low (or absent) memory pressure on the pool. - Measured in jiffies(1). + Measured in seconds. TCP variables: @@ -794,10 +794,6 @@ tag - INTEGER Allows you to write a number, which can be used as required. Default value is 0. -(1) Jiffie: internal timeunit for the kernel. On the i386 1/100s, on the -Alpha 1/1024s. See the HZ define in /usr/include/asm/param.h for the exact -value on your system. - Alexey Kuznetsov. kuznet@ms2.inr.ac.ru -- cgit v1.2.3 From ff31ab56c0e900235f653e375fc3b01ba2d8d6a3 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 1 Jul 2008 19:52:38 -0700 Subject: net-sched: change tcf_destroy_chain() to clear start of filter list Pass double tcf_proto pointers to tcf_destroy_chain() to make it clear the start of the filter list for more consistency. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/net/sch_generic.h | 2 +- net/mac80211/wme.c | 3 +-- net/sched/sch_api.c | 6 +++--- net/sched/sch_atm.c | 5 ++--- net/sched/sch_cbq.c | 8 +++----- net/sched/sch_dsmark.c | 2 +- net/sched/sch_hfsc.c | 2 +- net/sched/sch_htb.c | 4 ++-- net/sched/sch_ingress.c | 2 +- net/sched/sch_prio.c | 2 +- net/sched/sch_sfq.c | 2 +- 11 files changed, 17 insertions(+), 21 deletions(-) diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index ab502ec1c61c..a87fc0312edc 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -178,7 +178,7 @@ extern struct Qdisc *qdisc_alloc(struct net_device *dev, struct Qdisc_ops *ops); extern struct Qdisc *qdisc_create_dflt(struct net_device *dev, struct Qdisc_ops *ops, u32 parentid); extern void tcf_destroy(struct tcf_proto *tp); -extern void tcf_destroy_chain(struct tcf_proto *fl); +extern void tcf_destroy_chain(struct tcf_proto **fl); static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch, struct sk_buff_head *list) diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 635b996c8c35..5d09e8698b57 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -323,8 +323,7 @@ static void wme_qdiscop_destroy(struct Qdisc* qd) struct ieee80211_hw *hw = &local->hw; int queue; - tcf_destroy_chain(q->filter_list); - q->filter_list = NULL; + tcf_destroy_chain(&q->filter_list); for (queue=0; queue < hw->queues; queue++) { skb_queue_purge(&q->requeued[queue]); diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index c40773cdbe45..10f01ad04380 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -1252,12 +1252,12 @@ void tcf_destroy(struct tcf_proto *tp) kfree(tp); } -void tcf_destroy_chain(struct tcf_proto *fl) +void tcf_destroy_chain(struct tcf_proto **fl) { struct tcf_proto *tp; - while ((tp = fl) != NULL) { - fl = tp->next; + while ((tp = *fl) != NULL) { + *fl = tp->next; tcf_destroy(tp); } } diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c index 335273416384..8e5f70ba3a15 100644 --- a/net/sched/sch_atm.c +++ b/net/sched/sch_atm.c @@ -160,7 +160,7 @@ static void atm_tc_put(struct Qdisc *sch, unsigned long cl) *prev = flow->next; pr_debug("atm_tc_put: qdisc %p\n", flow->q); qdisc_destroy(flow->q); - tcf_destroy_chain(flow->filter_list); + tcf_destroy_chain(&flow->filter_list); if (flow->sock) { pr_debug("atm_tc_put: f_count %d\n", file_count(flow->sock->file)); @@ -588,8 +588,7 @@ static void atm_tc_destroy(struct Qdisc *sch) pr_debug("atm_tc_destroy(sch %p,[qdisc %p])\n", sch, p); /* races ? */ while ((flow = p->flows)) { - tcf_destroy_chain(flow->filter_list); - flow->filter_list = NULL; + tcf_destroy_chain(&flow->filter_list); if (flow->ref > 1) printk(KERN_ERR "atm_destroy: %p->ref = %d\n", flow, flow->ref); diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 09969c1fbc08..2a3c97f7dc63 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -1704,7 +1704,7 @@ static void cbq_destroy_class(struct Qdisc *sch, struct cbq_class *cl) BUG_TRAP(!cl->filters); - tcf_destroy_chain(cl->filter_list); + tcf_destroy_chain(&cl->filter_list); qdisc_destroy(cl->q); qdisc_put_rtab(cl->R_tab); gen_kill_estimator(&cl->bstats, &cl->rate_est); @@ -1728,10 +1728,8 @@ cbq_destroy(struct Qdisc* sch) * be bound to classes which have been destroyed already. --TGR '04 */ for (h = 0; h < 16; h++) { - for (cl = q->classes[h]; cl; cl = cl->next) { - tcf_destroy_chain(cl->filter_list); - cl->filter_list = NULL; - } + for (cl = q->classes[h]; cl; cl = cl->next) + tcf_destroy_chain(&cl->filter_list); } for (h = 0; h < 16; h++) { struct cbq_class *next; diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c index 64465bacbe79..c4c1317cd47d 100644 --- a/net/sched/sch_dsmark.c +++ b/net/sched/sch_dsmark.c @@ -416,7 +416,7 @@ static void dsmark_destroy(struct Qdisc *sch) pr_debug("dsmark_destroy(sch %p,[qdisc %p])\n", sch, p); - tcf_destroy_chain(p->filter_list); + tcf_destroy_chain(&p->filter_list); qdisc_destroy(p->q); kfree(p->mask); } diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index fdfaa3fcc16d..eca83a3be293 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1123,7 +1123,7 @@ hfsc_destroy_class(struct Qdisc *sch, struct hfsc_class *cl) { struct hfsc_sched *q = qdisc_priv(sch); - tcf_destroy_chain(cl->filter_list); + tcf_destroy_chain(&cl->filter_list); qdisc_destroy(cl->qdisc); gen_kill_estimator(&cl->bstats, &cl->rate_est); if (cl != &q->root) diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 6807c97985a5..3fb58f428f72 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1238,7 +1238,7 @@ static void htb_destroy_class(struct Qdisc *sch, struct htb_class *cl) qdisc_put_rtab(cl->rate); qdisc_put_rtab(cl->ceil); - tcf_destroy_chain(cl->filter_list); + tcf_destroy_chain(&cl->filter_list); while (!list_empty(&cl->children)) htb_destroy_class(sch, list_entry(cl->children.next, @@ -1267,7 +1267,7 @@ static void htb_destroy(struct Qdisc *sch) and surprisingly it worked in 2.4. But it must precede it because filter need its target class alive to be able to call unbind_filter on it (without Oops). */ - tcf_destroy_chain(q->filter_list); + tcf_destroy_chain(&q->filter_list); while (!list_empty(&q->root)) htb_destroy_class(sch, list_entry(q->root.next, diff --git a/net/sched/sch_ingress.c b/net/sched/sch_ingress.c index 274b1ddb160c..956c80ad5965 100644 --- a/net/sched/sch_ingress.c +++ b/net/sched/sch_ingress.c @@ -104,7 +104,7 @@ static void ingress_destroy(struct Qdisc *sch) { struct ingress_qdisc_data *p = qdisc_priv(sch); - tcf_destroy_chain(p->filter_list); + tcf_destroy_chain(&p->filter_list); } static int ingress_dump(struct Qdisc *sch, struct sk_buff *skb) diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c index 4aa2b45dad0a..5532f1031ab5 100644 --- a/net/sched/sch_prio.c +++ b/net/sched/sch_prio.c @@ -219,7 +219,7 @@ prio_destroy(struct Qdisc* sch) int prio; struct prio_sched_data *q = qdisc_priv(sch); - tcf_destroy_chain(q->filter_list); + tcf_destroy_chain(&q->filter_list); for (prio=0; priobands; prio++) qdisc_destroy(q->queues[prio]); } diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c index f0463d757a98..6a97afbfb952 100644 --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -520,7 +520,7 @@ static void sfq_destroy(struct Qdisc *sch) { struct sfq_sched_data *q = qdisc_priv(sch); - tcf_destroy_chain(q->filter_list); + tcf_destroy_chain(&q->filter_list); q->perturb_period = 0; del_timer_sync(&q->perturb_timer); } -- cgit v1.2.3 From a4aebb83cf0da0363684f1c339f7e6149a3e74c1 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 1 Jul 2008 19:53:09 -0700 Subject: net-sched: fix filter destruction in atm/hfsc qdisc destruction Filters need to be destroyed before beginning to destroy classes since the destination class needs to still be alive to unbind the filter. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/sched/sch_atm.c | 4 +++- net/sched/sch_hfsc.c | 4 ++++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c index 8e5f70ba3a15..db0e23ae85f8 100644 --- a/net/sched/sch_atm.c +++ b/net/sched/sch_atm.c @@ -586,9 +586,11 @@ static void atm_tc_destroy(struct Qdisc *sch) struct atm_flow_data *flow; pr_debug("atm_tc_destroy(sch %p,[qdisc %p])\n", sch, p); + for (flow = p->flows; flow; flow = flow->next) + tcf_destroy_chain(&flow->filter_list); + /* races ? */ while ((flow = p->flows)) { - tcf_destroy_chain(&flow->filter_list); if (flow->ref > 1) printk(KERN_ERR "atm_destroy: %p->ref = %d\n", flow, flow->ref); diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index eca83a3be293..e817aa00441d 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1540,6 +1540,10 @@ hfsc_destroy_qdisc(struct Qdisc *sch) struct hfsc_class *cl, *next; unsigned int i; + for (i = 0; i < HFSC_HSIZE; i++) { + list_for_each_entry(cl, &q->clhash[i], hlist) + tcf_destroy_chain(&cl->filter_list); + } for (i = 0; i < HFSC_HSIZE; i++) { list_for_each_entry_safe(cl, next, &q->clhash[i], hlist) hfsc_destroy_class(sch, cl); -- cgit v1.2.3 From 8487460720fd03a0f4ecd032f017b0a8468028da Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 1 Jul 2008 19:55:09 -0700 Subject: netlink: Unneeded local variable We already have a variable, which has the same capability. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/netlink/af_netlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 9b97f8006c9c..349aba189558 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -886,7 +886,7 @@ retry: return netlink_unicast_kernel(sk, skb); if (sk_filter(sk, skb)) { - int err = skb->len; + err = skb->len; kfree_skb(skb); sock_put(sk); return err; -- cgit v1.2.3 From 8fde8a076940969d32805b853efdce8b988d7dda Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 1 Jul 2008 19:55:40 -0700 Subject: net: Tyop of sk_filter() comment Parameter "needlock" no long exists. Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/core/filter.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/core/filter.c b/net/core/filter.c index 4f8369729a4e..df3744355839 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -68,7 +68,6 @@ static inline void *load_pointer(struct sk_buff *skb, int k, * sk_filter - run a packet through a socket filter * @sk: sock associated with &sk_buff * @skb: buffer to filter - * @needlock: set to 1 if the sock is not locked by caller. * * Run the filter code and then cut skb->data to correct size returned by * sk_run_filter. If pkt_len is 0 we toss packet. If skb->len is smaller -- cgit v1.2.3 From 93b3cff9915322d6fa36bac0064714a7076230e4 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 1 Jul 2008 19:57:19 -0700 Subject: netdevice: Fix wrong string handle in kernel command line parsing v1->v2: Use strlcpy() to ensure s[i].name be null-termination. 1. In netdev_boot_setup_add(), a long name will leak. ex. : dev=21,0x1234,0x1234,0x2345,eth123456789verylongname......... 2. In netdev_boot_setup_check(), mismatch will happen if s[i].name is a substring of dev->name. ex. : dev=...eth1 dev=...eth11 [ With feedback from Ben Hutchings. ] Signed-off-by: Wang Chen Signed-off-by: David S. Miller --- net/core/dev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 56b46579ff4e..fca23a3bf12c 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -454,7 +454,7 @@ static int netdev_boot_setup_add(char *name, struct ifmap *map) for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) { if (s[i].name[0] == '\0' || s[i].name[0] == ' ') { memset(s[i].name, 0, sizeof(s[i].name)); - strcpy(s[i].name, name); + strlcpy(s[i].name, name, IFNAMSIZ); memcpy(&s[i].map, map, sizeof(s[i].map)); break; } @@ -479,7 +479,7 @@ int netdev_boot_setup_check(struct net_device *dev) for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) { if (s[i].name[0] != '\0' && s[i].name[0] != ' ' && - !strncmp(dev->name, s[i].name, strlen(s[i].name))) { + !strcmp(dev->name, s[i].name)) { dev->irq = s[i].map.irq; dev->base_addr = s[i].map.base_addr; dev->mem_start = s[i].map.mem_start; -- cgit v1.2.3 From 2fe195cfe3e53c144d247b2768e37732e8eae4d8 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 1 Jul 2008 19:59:37 -0700 Subject: net: fib_rules: fix error code for unsupported families The errno code returned must be negative. Fixes "RTNETLINK answers: Unknown error 18446744073709551519". Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/core/fib_rules.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c index e3e9ab0f74e3..277a2302eb3a 100644 --- a/net/core/fib_rules.c +++ b/net/core/fib_rules.c @@ -226,7 +226,7 @@ static int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) ops = lookup_rules_ops(net, frh->family); if (ops == NULL) { - err = EAFNOSUPPORT; + err = -EAFNOSUPPORT; goto errout; } @@ -365,7 +365,7 @@ static int fib_nl_delrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) ops = lookup_rules_ops(net, frh->family); if (ops == NULL) { - err = EAFNOSUPPORT; + err = -EAFNOSUPPORT; goto errout; } -- cgit v1.2.3 From c7f1b2044191a82e7f0a1a674751ed582289e2e0 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Wed, 2 Jul 2008 09:34:28 +0100 Subject: dm crypt: use cond_resched Add cond_resched() to prevent monopolising CPU when processing large bios. dm-crypt processes encryption of bios in sector units. If the bio request is big it can spend a long time in the encryption call. Signed-off-by: Milan Broz Tested-by: Yan Li Signed-off-by: Andrew Morton Signed-off-by: Alasdair G Kergon --- drivers/md/dm-crypt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 835def11419d..ab6a61db63ce 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -432,6 +432,7 @@ static int crypt_convert(struct crypt_config *cc, case 0: atomic_dec(&ctx->pending); ctx->sector++; + cond_resched(); continue; /* error */ -- cgit v1.2.3 From b13d618b44fefea7529bd467e55423d353a599fc Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 15 May 2007 15:06:41 +0200 Subject: avr32: Clean up and optimize the TLB operations This and the following patches aim to optimize the code dealing with page tables and TLB operations. Each patch reduces the time it takes to gzip a 16 MB file slightly, but I expect things like fork() and mmap() will improve somewhat more. This patch deals with the low-level TLB operations: * Remove unused _TLBEHI_I define * Use gcc builtins instead of inline assembly * Remove a few unnecessary pipeline flushes and nops * Introduce NR_TLB_ENTRIES define and use it instead of hardcoding it to 32 a few places throughout the code. * Use sysreg bitops instead of hardcoded shifts and masks * Make a few needlessly global functions static Signed-off-by: Haavard Skinnemoen --- arch/avr32/mm/tlb.c | 175 +++++++++++++++++++++---------------------- include/asm-avr32/tlbflush.h | 1 - 2 files changed, 87 insertions(+), 89 deletions(-) diff --git a/arch/avr32/mm/tlb.c b/arch/avr32/mm/tlb.c index cd12edbea9f2..06677be98ffb 100644 --- a/arch/avr32/mm/tlb.c +++ b/arch/avr32/mm/tlb.c @@ -11,21 +11,21 @@ #include -#define _TLBEHI_I 0x100 +/* TODO: Get the correct number from the CONFIG1 system register */ +#define NR_TLB_ENTRIES 32 -void show_dtlb_entry(unsigned int index) +static void show_dtlb_entry(unsigned int index) { - unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save; + u32 tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save; unsigned long flags; local_irq_save(flags); mmucr_save = sysreg_read(MMUCR); tlbehi_save = sysreg_read(TLBEHI); - mmucr = mmucr_save & 0x13; - mmucr |= index << 14; + mmucr = SYSREG_BFINS(DRP, index, mmucr_save); sysreg_write(MMUCR, mmucr); - asm volatile("tlbr" : : : "memory"); + __builtin_tlbr(); cpu_sync_pipeline(); tlbehi = sysreg_read(TLBEHI); @@ -33,15 +33,17 @@ void show_dtlb_entry(unsigned int index) printk("%2u: %c %c %02x %05x %05x %o %o %c %c %c %c\n", index, - (tlbehi & 0x200)?'1':'0', - (tlbelo & 0x100)?'1':'0', - (tlbehi & 0xff), - (tlbehi >> 12), (tlbelo >> 12), - (tlbelo >> 4) & 7, (tlbelo >> 2) & 3, - (tlbelo & 0x200)?'1':'0', - (tlbelo & 0x080)?'1':'0', - (tlbelo & 0x001)?'1':'0', - (tlbelo & 0x002)?'1':'0'); + SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0', + SYSREG_BFEXT(G, tlbelo) ? '1' : '0', + SYSREG_BFEXT(ASID, tlbehi), + SYSREG_BFEXT(VPN, tlbehi) >> 2, + SYSREG_BFEXT(PFN, tlbelo) >> 2, + SYSREG_BFEXT(AP, tlbelo), + SYSREG_BFEXT(SZ, tlbelo), + SYSREG_BFEXT(TLBELO_C, tlbelo) ? 'C' : ' ', + SYSREG_BFEXT(B, tlbelo) ? 'B' : ' ', + SYSREG_BFEXT(W, tlbelo) ? 'W' : ' ', + SYSREG_BFEXT(TLBELO_D, tlbelo) ? 'D' : ' '); sysreg_write(MMUCR, mmucr_save); sysreg_write(TLBEHI, tlbehi_save); @@ -54,29 +56,33 @@ void dump_dtlb(void) unsigned int i; printk("ID V G ASID VPN PFN AP SZ C B W D\n"); - for (i = 0; i < 32; i++) + for (i = 0; i < NR_TLB_ENTRIES; i++) show_dtlb_entry(i); } -static unsigned long last_mmucr; - -static inline void set_replacement_pointer(unsigned shift) +static void update_dtlb(unsigned long address, pte_t pte) { - unsigned long mmucr, mmucr_save; + u32 tlbehi; + u32 mmucr; - mmucr = mmucr_save = sysreg_read(MMUCR); + /* + * We're not changing the ASID here, so no need to flush the + * pipeline. + */ + tlbehi = sysreg_read(TLBEHI); + tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi)); + tlbehi |= address & MMU_VPN_MASK; + tlbehi |= SYSREG_BIT(TLBEHI_V); + sysreg_write(TLBEHI, tlbehi); /* Does this mapping already exist? */ - __asm__ __volatile__( - " tlbs\n" - " mfsr %0, %1" - : "=r"(mmucr) - : "i"(SYSREG_MMUCR)); + __builtin_tlbs(); + mmucr = sysreg_read(MMUCR); if (mmucr & SYSREG_BIT(MMUCR_N)) { /* Not found -- pick a not-recently-accessed entry */ - unsigned long rp; - unsigned long tlbar = sysreg_read(TLBARLO); + unsigned int rp; + u32 tlbar = sysreg_read(TLBARLO); rp = 32 - fls(tlbar); if (rp == 32) { @@ -84,30 +90,14 @@ static inline void set_replacement_pointer(unsigned shift) sysreg_write(TLBARLO, -1L); } - mmucr &= 0x13; - mmucr |= (rp << shift); - + mmucr = SYSREG_BFINS(DRP, rp, mmucr); sysreg_write(MMUCR, mmucr); } - last_mmucr = mmucr; -} - -static void update_dtlb(unsigned long address, pte_t pte, unsigned long asid) -{ - unsigned long vpn; - - vpn = (address & MMU_VPN_MASK) | _TLBEHI_VALID | asid; - sysreg_write(TLBEHI, vpn); - cpu_sync_pipeline(); - - set_replacement_pointer(14); - sysreg_write(TLBELO, pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK); /* Let's go */ - asm volatile("nop\n\ttlbw" : : : "memory"); - cpu_sync_pipeline(); + __builtin_tlbw(); } void update_mmu_cache(struct vm_area_struct *vma, @@ -120,39 +110,40 @@ void update_mmu_cache(struct vm_area_struct *vma, return; local_irq_save(flags); - update_dtlb(address, pte, get_asid()); + update_dtlb(address, pte); local_irq_restore(flags); } -void __flush_tlb_page(unsigned long asid, unsigned long page) +static void __flush_tlb_page(unsigned long asid, unsigned long page) { - unsigned long mmucr, tlbehi; + u32 mmucr, tlbehi; - page |= asid; - sysreg_write(TLBEHI, page); - cpu_sync_pipeline(); - asm volatile("tlbs"); + /* + * Caller is responsible for masking out non-PFN bits in page + * and changing the current ASID if necessary. This means that + * we don't need to flush the pipeline after writing TLBEHI. + */ + tlbehi = page | asid; + sysreg_write(TLBEHI, tlbehi); + + __builtin_tlbs(); mmucr = sysreg_read(MMUCR); if (!(mmucr & SYSREG_BIT(MMUCR_N))) { - unsigned long tlbarlo; - unsigned long entry; + unsigned int entry; + u32 tlbarlo; /* Clear the "valid" bit */ - tlbehi = sysreg_read(TLBEHI); - tlbehi &= ~_TLBEHI_VALID; sysreg_write(TLBEHI, tlbehi); - cpu_sync_pipeline(); /* mark the entry as "not accessed" */ - entry = (mmucr >> 14) & 0x3f; + entry = SYSREG_BFEXT(DRP, mmucr); tlbarlo = sysreg_read(TLBARLO); - tlbarlo |= (0x80000000 >> entry); + tlbarlo |= (0x80000000UL >> entry); sysreg_write(TLBARLO, tlbarlo); /* update the entry with valid bit clear */ - asm volatile("tlbw"); - cpu_sync_pipeline(); + __builtin_tlbw(); } } @@ -190,17 +181,22 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; + if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */ mm->context = NO_CONTEXT; if (mm == current->mm) activate_context(mm); } else { - unsigned long asid = mm->context & MMU_CONTEXT_ASID_MASK; - unsigned long saved_asid = MMU_NO_ASID; + unsigned long asid; + unsigned long saved_asid; + + asid = mm->context & MMU_CONTEXT_ASID_MASK; + saved_asid = MMU_NO_ASID; start &= PAGE_MASK; end += (PAGE_SIZE - 1); end &= PAGE_MASK; + if (mm != current->mm) { saved_asid = get_asid(); set_asid(asid); @@ -218,33 +214,34 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } /* - * TODO: If this is only called for addresses > TASK_SIZE, we can probably - * skip the ASID stuff and just use the Global bit... + * This function depends on the pages to be flushed having the G + * (global) bit set in their pte. This is true for all + * PAGE_KERNEL(_RO) pages. */ void flush_tlb_kernel_range(unsigned long start, unsigned long end) { unsigned long flags; int size; - local_irq_save(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */ flush_tlb_all(); } else { - unsigned long asid = init_mm.context & MMU_CONTEXT_ASID_MASK; - unsigned long saved_asid = get_asid(); + unsigned long asid; + + local_irq_save(flags); + asid = get_asid(); start &= PAGE_MASK; end += (PAGE_SIZE - 1); end &= PAGE_MASK; - set_asid(asid); + while (start < end) { __flush_tlb_page(asid, start); start += PAGE_SIZE; } - set_asid(saved_asid); + local_irq_restore(flags); } - local_irq_restore(flags); } void flush_tlb_mm(struct mm_struct *mm) @@ -280,7 +277,7 @@ static void *tlb_start(struct seq_file *tlb, loff_t *pos) { static unsigned long tlb_index; - if (*pos >= 32) + if (*pos >= NR_TLB_ENTRIES) return NULL; tlb_index = 0; @@ -291,7 +288,7 @@ static void *tlb_next(struct seq_file *tlb, void *v, loff_t *pos) { unsigned long *index = v; - if (*index >= 31) + if (*index >= NR_TLB_ENTRIES - 1) return NULL; ++*pos; @@ -313,16 +310,16 @@ static int tlb_show(struct seq_file *tlb, void *v) if (*index == 0) seq_puts(tlb, "ID V G ASID VPN PFN AP SZ C B W D\n"); - BUG_ON(*index >= 32); + BUG_ON(*index >= NR_TLB_ENTRIES); local_irq_save(flags); mmucr_save = sysreg_read(MMUCR); tlbehi_save = sysreg_read(TLBEHI); - mmucr = mmucr_save & 0x13; - mmucr |= *index << 14; + mmucr = SYSREG_BFINS(DRP, *index, mmucr_save); sysreg_write(MMUCR, mmucr); - asm volatile("tlbr" : : : "memory"); + /* TLBR might change the ASID */ + __builtin_tlbr(); cpu_sync_pipeline(); tlbehi = sysreg_read(TLBEHI); @@ -334,16 +331,18 @@ static int tlb_show(struct seq_file *tlb, void *v) local_irq_restore(flags); seq_printf(tlb, "%2lu: %c %c %02x %05x %05x %o %o %c %c %c %c\n", - *index, - (tlbehi & 0x200)?'1':'0', - (tlbelo & 0x100)?'1':'0', - (tlbehi & 0xff), - (tlbehi >> 12), (tlbelo >> 12), - (tlbelo >> 4) & 7, (tlbelo >> 2) & 3, - (tlbelo & 0x200)?'1':'0', - (tlbelo & 0x080)?'1':'0', - (tlbelo & 0x001)?'1':'0', - (tlbelo & 0x002)?'1':'0'); + *index, + SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0', + SYSREG_BFEXT(G, tlbelo) ? '1' : '0', + SYSREG_BFEXT(ASID, tlbehi), + SYSREG_BFEXT(VPN, tlbehi) >> 2, + SYSREG_BFEXT(PFN, tlbelo) >> 2, + SYSREG_BFEXT(AP, tlbelo), + SYSREG_BFEXT(SZ, tlbelo), + SYSREG_BFEXT(TLBELO_C, tlbelo) ? '1' : '0', + SYSREG_BFEXT(B, tlbelo) ? '1' : '0', + SYSREG_BFEXT(W, tlbelo) ? '1' : '0', + SYSREG_BFEXT(TLBELO_D, tlbelo) ? '1' : '0'); return 0; } diff --git a/include/asm-avr32/tlbflush.h b/include/asm-avr32/tlbflush.h index 5bc7c88a5770..bf90a786f6be 100644 --- a/include/asm-avr32/tlbflush.h +++ b/include/asm-avr32/tlbflush.h @@ -26,7 +26,6 @@ extern void flush_tlb_mm(struct mm_struct *mm); extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); -extern void __flush_tlb_page(unsigned long asid, unsigned long page); extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); -- cgit v1.2.3 From ebe74597a55fef00edc80a414ef5c6477d035e0a Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 14 Jan 2008 22:16:50 +0100 Subject: avr32: Remove useless zeroing of swapper_pg_dir at startup swapper_pg_dir is stored in .bss, so it must already be zeroed out when we get there. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mm/init.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c index 5ee1e407dcf7..0e77578c358d 100644 --- a/arch/avr32/mm/init.c +++ b/arch/avr32/mm/init.c @@ -108,19 +108,9 @@ void __init paging_init(void) zero_page = alloc_bootmem_low_pages_node(NODE_DATA(0), PAGE_SIZE); - { - pgd_t *pg_dir; - int i; - - pg_dir = swapper_pg_dir; - sysreg_write(PTBR, (unsigned long)pg_dir); - - for (i = 0; i < PTRS_PER_PGD; i++) - pgd_val(pg_dir[i]) = 0; - - enable_mmu(); - printk ("CPU: Paging enabled\n"); - } + sysreg_write(PTBR, (unsigned long)swapper_pg_dir); + enable_mmu(); + printk ("CPU: Paging enabled\n"); for_each_online_node(nid) { pg_data_t *pgdat = NODE_DATA(nid); -- cgit v1.2.3 From cfd23e93a0289cf6711fd3877c5226658d87240a Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 14 Jan 2008 22:15:05 +0100 Subject: avr32: Store virtual addresses in the PGD Instead of storing physical addresses along with page flags in the PGD, store virtual addresses and use NULL to indicate a not present second-level page table. A non-page-aligned page table indicates a bad PMD. This simplifies the TLB miss handler since it no longer has to check the Present bit and no longer has to convert the PGD entry from physical to virtual address. Instead, it has to check for a NULL entry, which is slightly cheaper than either. Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/entry-avr32b.S | 45 ++++++++++++++++++---------------------- arch/avr32/kernel/vmlinux.lds.S | 4 ++++ arch/avr32/mm/init.c | 4 +++- include/asm-avr32/pgalloc.h | 18 +++++++++------- include/asm-avr32/pgtable.h | 34 +++++++++++++----------------- 5 files changed, 51 insertions(+), 54 deletions(-) diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S index 050c006a7f0c..3cdd7071f35e 100644 --- a/arch/avr32/kernel/entry-avr32b.S +++ b/arch/avr32/kernel/entry-avr32b.S @@ -74,12 +74,6 @@ exception_vectors: .align 2 bral do_dtlb_modified - /* - * r0 : PGD/PT/PTE - * r1 : Offending address - * r2 : Scratch register - * r3 : Cause (5, 12 or 13) - */ #define tlbmiss_save pushm r0-r3 #define tlbmiss_restore popm r0-r3 @@ -108,17 +102,17 @@ tlb_miss_common: bld r0, 31 brcs handle_vmalloc_miss - /* First level lookup */ + /* + * First level lookup: The PGD contains virtual pointers to + * the second-level page tables, but they may be NULL if not + * present. + */ pgtbl_lookup: lsr r2, r0, PGDIR_SHIFT ld.w r3, r1[r2 << 2] bfextu r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT - bld r3, _PAGE_BIT_PRESENT - brcc page_table_not_present - - /* Translate to virtual address in P1. */ - andl r3, 0xf000 - sbr r3, 31 + cp.w r3, 0 + breq page_table_not_present /* Second level lookup */ ld.w r2, r3[r1 << 2] @@ -155,6 +149,19 @@ handle_vmalloc_miss: orh r1, hi(swapper_pg_dir) rjmp pgtbl_lookup + /* The slow path of the TLB miss handler */ + .align 2 +page_table_not_present: +page_not_present: + tlbmiss_restore + sub sp, 4 + stmts --sp, r0-lr + rcall save_full_context_ex + mfsr r12, SYSREG_ECR + mov r11, sp + rcall do_page_fault + rjmp ret_from_exception + /* --- System Call --- */ @@ -267,18 +274,6 @@ syscall_exit_work: brcc syscall_exit_cont rjmp enter_monitor_mode - /* The slow path of the TLB miss handler */ -page_table_not_present: -page_not_present: - tlbmiss_restore - sub sp, 4 - stmts --sp, r0-lr - rcall save_full_context_ex - mfsr r12, SYSREG_ECR - mov r11, sp - rcall do_page_fault - rjmp ret_from_exception - /* This function expects to find offending PC in SYSREG_RAR_EX */ .type save_full_context_ex, @function .align 2 diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S index 033dd46bfa62..5d25d8eeb750 100644 --- a/arch/avr32/kernel/vmlinux.lds.S +++ b/arch/avr32/kernel/vmlinux.lds.S @@ -99,6 +99,10 @@ SECTIONS */ *(.data.init_task) + /* Then, the page-aligned data */ + . = ALIGN(PAGE_SIZE); + *(.data.page_aligned) + /* Then, the cacheline aligned data */ . = ALIGN(L1_CACHE_BYTES); *(.data.cacheline_aligned) diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c index 0e77578c358d..3f90a87527bb 100644 --- a/arch/avr32/mm/init.c +++ b/arch/avr32/mm/init.c @@ -24,9 +24,11 @@ #include #include +#define __page_aligned __attribute__((section(".data.page_aligned"))) + DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); -pgd_t swapper_pg_dir[PTRS_PER_PGD]; +pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned; struct page *empty_zero_page; EXPORT_SYMBOL(empty_zero_page); diff --git a/include/asm-avr32/pgalloc.h b/include/asm-avr32/pgalloc.h index 51fc1f6e4b17..5b768fc2388e 100644 --- a/include/asm-avr32/pgalloc.h +++ b/include/asm-avr32/pgalloc.h @@ -8,25 +8,27 @@ #ifndef __ASM_AVR32_PGALLOC_H #define __ASM_AVR32_PGALLOC_H -#include -#include -#include #include +#include +#include -#define pmd_populate_kernel(mm, pmd, pte) \ - set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte))) +static inline void pmd_populate_kernel(struct mm_struct *mm, + pmd_t *pmd, pte_t *pte) +{ + set_pmd(pmd, __pmd((unsigned long)pte)); +} -static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd, +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte) { - set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte))); + set_pmd(pmd, __pmd((unsigned long)page_address(pte))); } #define pmd_pgtable(pmd) pmd_page(pmd) /* * Allocate and free page tables */ -static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm) +static inline pgd_t *pgd_alloc(struct mm_struct *mm) { return kcalloc(USER_PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL); } diff --git a/include/asm-avr32/pgtable.h b/include/asm-avr32/pgtable.h index c0e5e29417df..fecdda16f444 100644 --- a/include/asm-avr32/pgtable.h +++ b/include/asm-avr32/pgtable.h @@ -129,13 +129,6 @@ extern struct page *empty_zero_page; #define _PAGE_FLAGS_CACHE_MASK (_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT) -/* TODO: Check for saneness */ -/* User-mode page table flags (to be set in a pgd or pmd entry) */ -#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \ - | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY) -/* Kernel-mode page table flags */ -#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \ - | _PAGE_ACCESSED | _PAGE_DIRTY) /* Flags that may be modified by software */ #define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \ | _PAGE_FLAGS_CACHE_MASK) @@ -262,10 +255,14 @@ static inline pte_t pte_mkspecial(pte_t pte) } #define pmd_none(x) (!pmd_val(x)) -#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) -#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) -#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) \ - != _KERNPG_TABLE) +#define pmd_present(x) (pmd_val(x)) + +static inline void pmd_clear(pmd_t *pmdp) +{ + set_pmd(pmdp, __pmd(0)); +} + +#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) /* * Permanent address of a page. We don't support highmem, so this is @@ -303,19 +300,16 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) #define page_pte(page) page_pte_prot(page, __pgprot(0)) -#define pmd_page_vaddr(pmd) \ - ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) - -#define pmd_page(pmd) (phys_to_page(pmd_val(pmd))) +#define pmd_page_vaddr(pmd) pmd_val(pmd) +#define pmd_page(pmd) (virt_to_page(pmd_val(pmd))) /* to find an entry in a page-table-directory. */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) -#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) -#define pgd_offset_current(address) \ - ((pgd_t *)__mfsr(SYSREG_PTBR) + pgd_index(address)) +#define pgd_index(address) (((address) >> PGDIR_SHIFT) \ + & (PTRS_PER_PGD - 1)) +#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) /* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) +#define pgd_offset_k(address) pgd_offset(&init_mm, address) /* Find an entry in the third-level page table.. */ #define pte_index(address) \ -- cgit v1.2.3 From a9a934f278613885816aa9f177968c1dac557240 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 14 Jan 2008 23:11:26 +0100 Subject: avr32: Cover the kernel page tables in the user PGDs Expand the per-process PGDs so that they cover the kernel virtual memory area as well. This simplifies the TLB miss handler fastpath since it doesn't have to check for kernel addresses anymore. If a TLB miss happens on a kernel address and a second-level page table can't be found, we check swapper_pg_dir and copy the PGD entry into the user PGD if it can be found there. Signed-off-by: Haavard Skinnemoen --- arch/avr32/kernel/entry-avr32b.S | 42 ++++++++++++++++++++++++++++++---------- include/asm-avr32/pgalloc.h | 14 ++++++++++---- 2 files changed, 42 insertions(+), 14 deletions(-) diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S index 3cdd7071f35e..2b398cae110c 100644 --- a/arch/avr32/kernel/entry-avr32b.S +++ b/arch/avr32/kernel/entry-avr32b.S @@ -98,10 +98,6 @@ tlb_miss_common: mfsr r0, SYSREG_TLBEAR mfsr r1, SYSREG_PTBR - /* Is it the vmalloc space? */ - bld r0, 31 - brcs handle_vmalloc_miss - /* * First level lookup: The PGD contains virtual pointers to * the second-level page tables, but they may be NULL if not @@ -143,15 +139,13 @@ pgtbl_lookup: tlbmiss_restore rete -handle_vmalloc_miss: - /* Simply do the lookup in init's page table */ - mov r1, lo(swapper_pg_dir) - orh r1, hi(swapper_pg_dir) - rjmp pgtbl_lookup - /* The slow path of the TLB miss handler */ .align 2 page_table_not_present: + /* Do we need to synchronize with swapper_pg_dir? */ + bld r0, 31 + brcs sync_with_swapper_pg_dir + page_not_present: tlbmiss_restore sub sp, 4 @@ -162,6 +156,34 @@ page_not_present: rcall do_page_fault rjmp ret_from_exception + .align 2 +sync_with_swapper_pg_dir: + /* + * If swapper_pg_dir contains a non-NULL second-level page + * table pointer, copy it into the current PGD. If not, we + * must handle it as a full-blown page fault. + * + * Jumping back to pgtbl_lookup causes an unnecessary lookup, + * but it is guaranteed to be a cache hit, it won't happen + * very often, and we absolutely do not want to sacrifice any + * performance in the fast path in order to improve this. + */ + mov r1, lo(swapper_pg_dir) + orh r1, hi(swapper_pg_dir) + ld.w r3, r1[r2 << 2] + cp.w r3, 0 + breq page_not_present + mfsr r1, SYSREG_PTBR + st.w r1[r2 << 2], r3 + rjmp pgtbl_lookup + + /* + * We currently have two bytes left at this point until we + * crash into the system call handler... + * + * Don't worry, the assembler will let us know. + */ + /* --- System Call --- */ diff --git a/include/asm-avr32/pgalloc.h b/include/asm-avr32/pgalloc.h index 5b768fc2388e..e9636d1f383f 100644 --- a/include/asm-avr32/pgalloc.h +++ b/include/asm-avr32/pgalloc.h @@ -9,8 +9,6 @@ #define __ASM_AVR32_PGALLOC_H #include -#include -#include static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) @@ -30,12 +28,20 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, */ static inline pgd_t *pgd_alloc(struct mm_struct *mm) { - return kcalloc(USER_PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL); + pgd_t *pgd; + + pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT); + if (likely(pgd)) + memcpy(pgd + USER_PTRS_PER_PGD, + swapper_pg_dir + USER_PTRS_PER_PGD, + (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); + + return pgd; } static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) { - kfree(pgd); + free_page((unsigned long)pgd); } static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, -- cgit v1.2.3 From 5a4d5292779b6163aa41e594a56307e442fbe73c Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 14 Jan 2008 23:33:44 +0100 Subject: avr32: Use a quicklist for PGD allocation Use a quicklist to allocate process PGDs. This is expected to be slightly faster since we need to copy entries from swapper_pg_dir, which can stay around for pages on the PGD quick list. Signed-off-by: Haavard Skinnemoen --- arch/avr32/Kconfig | 3 +++ include/asm-avr32/pgalloc.h | 32 ++++++++++++++++++++------------ 2 files changed, 23 insertions(+), 12 deletions(-) diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 09ad7995080c..a5793c13f50c 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -147,6 +147,9 @@ config PHYS_OFFSET source "kernel/Kconfig.preempt" +config QUICKLIST + def_bool y + config HAVE_ARCH_BOOTMEM_NODE def_bool n diff --git a/include/asm-avr32/pgalloc.h b/include/asm-avr32/pgalloc.h index e9636d1f383f..a291f59659cf 100644 --- a/include/asm-avr32/pgalloc.h +++ b/include/asm-avr32/pgalloc.h @@ -8,7 +8,11 @@ #ifndef __ASM_AVR32_PGALLOC_H #define __ASM_AVR32_PGALLOC_H -#include +#include +#include +#include + +#define QUICK_PGD 0 /* Preserve kernel mappings over free */ static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) @@ -23,25 +27,26 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, } #define pmd_pgtable(pmd) pmd_page(pmd) +static inline void pgd_ctor(void *x) +{ + pgd_t *pgd = x; + + memcpy(pgd + USER_PTRS_PER_PGD, + swapper_pg_dir + USER_PTRS_PER_PGD, + (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); +} + /* * Allocate and free page tables */ static inline pgd_t *pgd_alloc(struct mm_struct *mm) { - pgd_t *pgd; - - pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT); - if (likely(pgd)) - memcpy(pgd + USER_PTRS_PER_PGD, - swapper_pg_dir + USER_PTRS_PER_PGD, - (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); - - return pgd; + return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor); } static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) { - free_page((unsigned long)pgd); + quicklist_free(QUICK_PGD, NULL, pgd); } static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, @@ -83,6 +88,9 @@ do { \ tlb_remove_page((tlb), pte); \ } while (0) -#define check_pgt_cache() do { } while(0) +static inline void check_pgt_cache(void) +{ + quicklist_trim(QUICK_PGD, NULL, 25, 16); +} #endif /* __ASM_AVR32_PGALLOC_H */ -- cgit v1.2.3 From 38510754a50192a072210e24fdc4ae65592182f0 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 14 Jan 2008 23:35:32 +0100 Subject: avr32: Use a quicklist for PTE allocation as well Using a quicklist to allocate PTEs might be slightly faster than using the page allocator directly since we might avoid zeroing the page after each allocation. Signed-off-by: Haavard Skinnemoen --- include/asm-avr32/pgalloc.h | 28 +++++++++++++++------------- mm/Kconfig | 2 +- 2 files changed, 16 insertions(+), 14 deletions(-) diff --git a/include/asm-avr32/pgalloc.h b/include/asm-avr32/pgalloc.h index a291f59659cf..640821323943 100644 --- a/include/asm-avr32/pgalloc.h +++ b/include/asm-avr32/pgalloc.h @@ -13,6 +13,7 @@ #include #define QUICK_PGD 0 /* Preserve kernel mappings over free */ +#define QUICK_PT 1 /* Zero on free */ static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) @@ -52,34 +53,34 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { - pte_t *pte; - - pte = (pte_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT); - - return pte; + return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); } -static inline struct page *pte_alloc_one(struct mm_struct *mm, +static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) { - struct page *pte; + struct page *page; + void *pg; - pte = alloc_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO); - if (!pte) + pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); + if (!pg) return NULL; - pgtable_page_ctor(pte); - return pte; + + page = virt_to_page(pg); + pgtable_page_ctor(page); + + return page; } static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) { - free_page((unsigned long)pte); + quicklist_free(QUICK_PT, NULL, pte); } static inline void pte_free(struct mm_struct *mm, pgtable_t pte) { pgtable_page_dtor(pte); - __free_page(pte); + quicklist_free_page(QUICK_PT, NULL, pte); } #define __pte_free_tlb(tlb,pte) \ @@ -91,6 +92,7 @@ do { \ static inline void check_pgt_cache(void) { quicklist_trim(QUICK_PGD, NULL, 25, 16); + quicklist_trim(QUICK_PT, NULL, 25, 16); } #endif /* __ASM_AVR32_PGALLOC_H */ diff --git a/mm/Kconfig b/mm/Kconfig index 3aa819d628c1..60b261952783 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -199,7 +199,7 @@ config BOUNCE config NR_QUICK int depends on QUICKLIST - default "2" if SUPERH + default "2" if SUPERH || AVR32 default "1" config VIRT_TO_BUS -- cgit v1.2.3 From f826caa44902ddbe93174f0b642d8abf9698c08e Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Sun, 24 Feb 2008 14:34:45 +0100 Subject: atmel_serial: Fix build on avr32 with CONFIG_PM enabled AVR32 doesn't have at91_suspend_entering_slow_clock(). Just assume the clock will keep running for now. David has a better solution for this, but this works for now. Leaving the USART clock running won't prevent the PM code from entering deep power-down modes anyway. Signed-off-by: Haavard Skinnemoen Cc: David Brownell Cc: Andrew Victor --- drivers/serial/atmel_serial.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 42be8b01a40f..5f0414fc1b10 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1439,6 +1439,15 @@ static struct uart_driver atmel_uart = { }; #ifdef CONFIG_PM +static bool atmel_serial_clk_will_stop(void) +{ +#ifdef CONFIG_ARCH_AT91 + return at91_suspend_entering_slow_clock(); +#else + return false; +#endif +} + static int atmel_serial_suspend(struct platform_device *pdev, pm_message_t state) { @@ -1446,7 +1455,7 @@ static int atmel_serial_suspend(struct platform_device *pdev, struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); if (device_may_wakeup(&pdev->dev) - && !at91_suspend_entering_slow_clock()) + && !atmel_serial_clk_will_stop()) enable_irq_wake(port->irq); else { uart_suspend_port(&atmel_uart, port); -- cgit v1.2.3 From e1c609efbc0333840f2af2d875ca52ed8ee18587 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Fri, 14 Mar 2008 14:54:13 +0100 Subject: atmel_serial: Drain console TX shifter before suspending Funny things may happen if we stop the USART clock before the shifter is empty. Prevent this from happening by waiting until the shifter is completely drained before allowing suspend to continue. Signed-off-by: Haavard Skinnemoen Cc: Andrew Victor --- drivers/serial/atmel_serial.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 5f0414fc1b10..6aeef22bd203 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1454,6 +1454,12 @@ static int atmel_serial_suspend(struct platform_device *pdev, struct uart_port *port = platform_get_drvdata(pdev); struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + if (atmel_is_console_port(port) && console_suspend_enabled) { + /* Drain the TX shifter */ + while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY)) + cpu_relax(); + } + if (device_may_wakeup(&pdev->dev) && !atmel_serial_clk_will_stop()) enable_irq_wake(port->irq); -- cgit v1.2.3 From c1f598fd71db6a971ee88311167c8003243ebff2 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 4 Mar 2008 13:39:29 +0100 Subject: macb: Basic suspend/resume support This implements suspend and resume callbacks for the macb driver. We may have to do some more to gracefully shut the MAC down, but this at least prevents the macb from waking the system when hooked up to a busy network. Signed-off-by: Haavard Skinnemoen Cc: Jeff Garzik Cc: Patrice Vilchez Cc: Nicolas FERRE --- drivers/net/macb.c | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 92dccd43bdca..0a5745a854c7 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -1277,8 +1277,45 @@ static int __exit macb_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +static int macb_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct net_device *netdev = platform_get_drvdata(pdev); + struct macb *bp = netdev_priv(netdev); + + netif_device_detach(netdev); + +#ifndef CONFIG_ARCH_AT91 + clk_disable(bp->hclk); +#endif + clk_disable(bp->pclk); + + return 0; +} + +static int macb_resume(struct platform_device *pdev) +{ + struct net_device *netdev = platform_get_drvdata(pdev); + struct macb *bp = netdev_priv(netdev); + + clk_enable(bp->pclk); +#ifndef CONFIG_ARCH_AT91 + clk_enable(bp->hclk); +#endif + + netif_device_attach(netdev); + + return 0; +} +#else +#define macb_suspend NULL +#define macb_resume NULL +#endif + static struct platform_driver macb_driver = { .remove = __exit_p(macb_remove), + .suspend = macb_suspend, + .resume = macb_resume, .driver = { .name = "macb", .owner = THIS_MODULE, -- cgit v1.2.3 From f3a24e1e272f844a4d14a39731b4fa946ba36adc Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 30 Jun 2008 10:54:31 +0200 Subject: rtc-at32ap700x: Enable wakeup Call device_init_wakeup() to signal that the RTC is capable of waking the system. This is needed for rtcwake to work. Signed-off-by: Haavard Skinnemoen Cc: Hans-Christian Egtvedt Cc: Alessandro Zummo --- drivers/rtc/rtc-at32ap700x.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c index 2ef8cdfda4a7..90b9a6503e15 100644 --- a/drivers/rtc/rtc-at32ap700x.c +++ b/drivers/rtc/rtc-at32ap700x.c @@ -265,6 +265,7 @@ static int __init at32_rtc_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, rtc); + device_init_wakeup(&pdev->dev, 1); dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n", (unsigned long)rtc->regs, rtc->irq); @@ -284,6 +285,8 @@ static int __exit at32_rtc_remove(struct platform_device *pdev) { struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev); + device_init_wakeup(&pdev->dev, 0); + free_irq(rtc->irq, rtc); iounmap(rtc->regs); rtc_device_unregister(rtc->rtc); -- cgit v1.2.3 From 7951f188a0b7f9b2f181c692efb0d31082bec346 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 5 Mar 2008 15:08:27 +0100 Subject: avr32: Enable SDRAMC clock at startup The SDRAM controller needs a clock in order to respond to our commands, and suspend doesn't work very well without the SDRAM in self-refresh mode. Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/at32ap700x.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index baf4680b4988..3ee5e7278790 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -675,6 +675,14 @@ static struct clk hramc_clk = { .users = 1, .index = 3, }; +static struct clk sdramc_clk = { + .name = "sdramc_clk", + .parent = &pbb_clk, + .mode = pbb_clk_mode, + .get_rate = pbb_clk_get_rate, + .users = 1, + .index = 14, +}; static struct resource smc0_resource[] = { PBMEM(0xfff03400), @@ -1998,6 +2006,7 @@ struct clk *at32_clock_list[] = { &hmatrix_clk, &ebi_clk, &hramc_clk, + &sdramc_clk, &smc0_pclk, &smc0_mck, &pdc_hclk, -- cgit v1.2.3 From b83d6ee17588f1a4fbfc8ef0451b0900a5ef5950 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Wed, 5 Mar 2008 10:00:28 +0100 Subject: avr32: Add simple SRAM allocator Add SRAM allocator for avr32, which is just a thin wrapper around genalloc. Signed-off-by: Haavard Skinnemoen --- arch/avr32/Kconfig | 1 + arch/avr32/mach-at32ap/at32ap700x.c | 26 ++++++++++++++++++++++++++ include/asm-avr32/arch-at32ap/sram.h | 30 ++++++++++++++++++++++++++++++ 3 files changed, 57 insertions(+) create mode 100644 include/asm-avr32/arch-at32ap/sram.h diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index a5793c13f50c..e8ee5fa017b6 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -88,6 +88,7 @@ config PLATFORM_AT32AP select MMU select PERFORMANCE_COUNTERS select HAVE_GPIO_LIB + select GENERIC_ALLOCATOR # # CPU types diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 3ee5e7278790..07b21b121eef 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -20,6 +20,7 @@ #include #include #include +#include #include
with the' + @echo ' name of a dts file from the arch/$(ARCH)/boot/dts/ directory' + @echo ' (minus the .dts extension).' endef install: -- cgit v1.2.3 From 1d46e379aae7349069f459618f53fd5193c2fd29 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 4 Jul 2008 00:59:37 -0600 Subject: powerpc/bootwrapper: add missing bit of simpleImage target The wrapper script is missing the bits needed for building generic simpleImage targets (targets which don't depend on any particular firmware interface and retrieve all their data from the device tree). Signed-off-by: Grant Likely --- arch/powerpc/boot/wrapper | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 592a6ea474f6..644bf9d4ea00 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -214,6 +214,10 @@ simpleboot-virtex440-*) platformo="$object/simpleboot.o $object/virtex.o" binary=y ;; +simpleboot-*) + platformo="$object/simpleboot.o" + binary=y + ;; asp834x-redboot) platformo="$object/fixed-head.o $object/redboot-83xx.o" binary=y -- cgit v1.2.3 From 50952026036c7b4212b90091bf23a264c0ccc1fb Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 3 Jul 2008 23:28:35 +0100 Subject: [MIPS] Fix bug in atomic_sub_if_positive. The branch optimization fixes in 2.6.21 introduced a bug in atomic_sub_if_positive that causes it to return even when the sc instruction fails. The result is that e.g. down_trylock becomes unreliable as the semaphore counter is not always decremented. Original MUA-shredded patch from Morten Larsen . Signed-off-by: Ralf Baechle --- include/asm-mips/atomic.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h index a798d6299a79..1232be3885b0 100644 --- a/include/asm-mips/atomic.h +++ b/include/asm-mips/atomic.h @@ -283,10 +283,10 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) " beqz %0, 2f \n" " subu %0, %1, %3 \n" " .set reorder \n" - "1: \n" " .subsection 2 \n" "2: b 1b \n" " .previous \n" + "1: \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -664,10 +664,10 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) " beqz %0, 2f \n" " dsubu %0, %1, %3 \n" " .set reorder \n" - "1: \n" " .subsection 2 \n" "2: b 1b \n" " .previous \n" + "1: \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) -- cgit v1.2.3 From 823ed72e8fe566983b121e8cc3147dd50ce63a8a Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Fri, 4 Jul 2008 09:28:32 +0200 Subject: block: use get_unaligned_* helpers Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/aoe/aoecmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index 41f818be2f7e..2f1746295d06 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -1003,7 +1003,7 @@ aoecmd_cfg_rsp(struct sk_buff *skb) * Enough people have their dip switches set backwards to * warrant a loud message for this special case. */ - aoemajor = be16_to_cpu(get_unaligned(&h->major)); + aoemajor = get_unaligned_be16(&h->major); if (aoemajor == 0xfff) { printk(KERN_ERR "aoe: Warning: shelf address is all ones. " "Check shelf dip switches.\n"); -- cgit v1.2.3 From 72f6befeea7dc634a83219287d5b874734b85637 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Fri, 4 Jul 2008 09:33:03 +0200 Subject: avr32: Fix typo of IFSR in a comment in the PIO header file Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/pio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/avr32/mach-at32ap/pio.h b/arch/avr32/mach-at32ap/pio.h index 7795116a483a..9484dfcc08f2 100644 --- a/arch/avr32/mach-at32ap/pio.h +++ b/arch/avr32/mach-at32ap/pio.h @@ -57,7 +57,7 @@ /* Bitfields in IFDR */ -/* Bitfields in ISFR */ +/* Bitfields in IFSR */ /* Bitfields in SODR */ -- cgit v1.2.3 From be1fd70fea1100c57f3aa1934ebb93abc474e50c Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 4 Jul 2008 09:51:21 +0200 Subject: paride: push ioctl down into driver Leaves us with lock_kernel for two methods. Also remove a bogus printk with no printk level and return -ENOTTY not -EINVAL for correctness. Signed-off-by: Alan Cox Signed-off-by: Andrew Morton (Jens: added smp_lock.h include to pt.c, otherwise it wont compile because of missing {un}lock_kernel() definition) Signed-off-by: Jens Axboe --- drivers/block/paride/pt.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c index 8b9549ab4a4e..27455ee1e9da 100644 --- a/drivers/block/paride/pt.c +++ b/drivers/block/paride/pt.c @@ -146,6 +146,7 @@ static int (*drives[4])[6] = {&drive0, &drive1, &drive2, &drive3}; #include #include #include /* current, TASK_*, schedule_timeout() */ +#include #include @@ -189,8 +190,7 @@ module_param_array(drive3, int, NULL, 0); #define ATAPI_LOG_SENSE 0x4d static int pt_open(struct inode *inode, struct file *file); -static int pt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); +static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg); static int pt_release(struct inode *inode, struct file *file); static ssize_t pt_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos); @@ -236,7 +236,7 @@ static const struct file_operations pt_fops = { .owner = THIS_MODULE, .read = pt_read, .write = pt_write, - .ioctl = pt_ioctl, + .unlocked_ioctl = pt_ioctl, .open = pt_open, .release = pt_release, }; @@ -685,8 +685,7 @@ out: return err; } -static int pt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long pt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct pt_unit *tape = file->private_data; struct mtop __user *p = (void __user *)arg; @@ -700,23 +699,26 @@ static int pt_ioctl(struct inode *inode, struct file *file, switch (mtop.mt_op) { case MTREW: + lock_kernel(); pt_rewind(tape); + unlock_kernel(); return 0; case MTWEOF: + lock_kernel(); pt_write_fm(tape); + unlock_kernel(); return 0; default: - printk("%s: Unimplemented mt_op %d\n", tape->name, + /* FIXME: rate limit ?? */ + printk(KERN_DEBUG "%s: Unimplemented mt_op %d\n", tape->name, mtop.mt_op); return -EINVAL; } default: - printk("%s: Unimplemented ioctl 0x%x\n", tape->name, cmd); - return -EINVAL; - + return -ENOTTY; } } -- cgit v1.2.3 From 5b6155ee70e9c4d2ad7e6f514c8eee06e2711c3a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 4 Jul 2008 09:29:16 +0200 Subject: pktcdvd: push BKL down into driver Push the lock_kernel down into the driver and switch to unlocked_ioctl [akpm@linux-foundation.org: build fix] Signed-off-by: Alan Cox Acked-by: Peter Osterlund Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/pktcdvd.c | 35 +++++++++++++++++++++++++---------- 1 file changed, 25 insertions(+), 10 deletions(-) diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 589850cff359..85e44d07eab8 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -49,6 +49,7 @@ #include #include #include +#include #include #include #include @@ -2797,9 +2798,14 @@ out_mem: return ret; } -static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { - struct pktcdvd_device *pd = inode->i_bdev->bd_disk->private_data; + struct inode *inode = file->f_path.dentry->d_inode; + struct pktcdvd_device *pd; + long ret; + + lock_kernel(); + pd = inode->i_bdev->bd_disk->private_data; VPRINTK("pkt_ioctl: cmd %x, dev %d:%d\n", cmd, imajor(inode), iminor(inode)); @@ -2812,7 +2818,8 @@ static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u case CDROM_LAST_WRITTEN: case CDROM_SEND_PACKET: case SCSI_IOCTL_SEND_COMMAND: - return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); + ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); + break; case CDROMEJECT: /* @@ -2821,14 +2828,15 @@ static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u */ if (pd->refcnt == 1) pkt_lock_door(pd, 0); - return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); + ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); + break; default: VPRINTK(DRIVER_NAME": Unknown ioctl for %s (%x)\n", pd->name, cmd); - return -ENOTTY; + ret = -ENOTTY; } - - return 0; + unlock_kernel(); + return ret; } static int pkt_media_changed(struct gendisk *disk) @@ -2850,7 +2858,7 @@ static struct block_device_operations pktcdvd_ops = { .owner = THIS_MODULE, .open = pkt_open, .release = pkt_close, - .ioctl = pkt_ioctl, + .unlocked_ioctl = pkt_ioctl, .media_changed = pkt_media_changed, }; @@ -3015,7 +3023,8 @@ static void pkt_get_status(struct pkt_ctrl_command *ctrl_cmd) mutex_unlock(&ctl_mutex); } -static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static long pkt_ctl_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = (void __user *)arg; struct pkt_ctrl_command ctrl_cmd; @@ -3032,16 +3041,22 @@ static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cm case PKT_CTRL_CMD_SETUP: if (!capable(CAP_SYS_ADMIN)) return -EPERM; + lock_kernel(); ret = pkt_setup_dev(new_decode_dev(ctrl_cmd.dev), &pkt_dev); ctrl_cmd.pkt_dev = new_encode_dev(pkt_dev); + unlock_kernel(); break; case PKT_CTRL_CMD_TEARDOWN: if (!capable(CAP_SYS_ADMIN)) return -EPERM; + lock_kernel(); ret = pkt_remove_dev(new_decode_dev(ctrl_cmd.pkt_dev)); + unlock_kernel(); break; case PKT_CTRL_CMD_STATUS: + lock_kernel(); pkt_get_status(&ctrl_cmd); + unlock_kernel(); break; default: return -ENOTTY; @@ -3054,7 +3069,7 @@ static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cm static const struct file_operations pkt_ctl_fops = { - .ioctl = pkt_ctl_ioctl, + .unlocked_ioctl = pkt_ctl_ioctl, .owner = THIS_MODULE, }; -- cgit v1.2.3 From 2610324fcacf38a24b630090ebcb802538763187 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 4 Jul 2008 09:29:31 +0200 Subject: DAC960: push down BKL Signed-off-by: Alan Cox Cc: Richard Knutsson Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/DAC960.c | 157 +++++++++++++++++++++++++++++++------------------ 1 file changed, 101 insertions(+), 56 deletions(-) diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c index cd03473f3547..a002a381df92 100644 --- a/drivers/block/DAC960.c +++ b/drivers/block/DAC960.c @@ -6628,15 +6628,18 @@ static void DAC960_DestroyProcEntries(DAC960_Controller_T *Controller) * DAC960_gam_ioctl is the ioctl function for performing RAID operations. */ -static int DAC960_gam_ioctl(struct inode *inode, struct file *file, - unsigned int Request, unsigned long Argument) +static long DAC960_gam_ioctl(struct file *file, unsigned int Request, + unsigned long Argument) { - int ErrorCode = 0; + long ErrorCode = 0; if (!capable(CAP_SYS_ADMIN)) return -EACCES; + + lock_kernel(); switch (Request) { case DAC960_IOCTL_GET_CONTROLLER_COUNT: - return DAC960_ControllerCount; + ErrorCode = DAC960_ControllerCount; + break; case DAC960_IOCTL_GET_CONTROLLER_INFO: { DAC960_ControllerInfo_T __user *UserSpaceControllerInfo = @@ -6644,15 +6647,20 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, DAC960_ControllerInfo_T ControllerInfo; DAC960_Controller_T *Controller; int ControllerNumber; - if (UserSpaceControllerInfo == NULL) return -EINVAL; - ErrorCode = get_user(ControllerNumber, + if (UserSpaceControllerInfo == NULL) + ErrorCode = -EINVAL; + else ErrorCode = get_user(ControllerNumber, &UserSpaceControllerInfo->ControllerNumber); - if (ErrorCode != 0) return ErrorCode; + if (ErrorCode != 0) + break;; + ErrorCode = -ENXIO; if (ControllerNumber < 0 || - ControllerNumber > DAC960_ControllerCount - 1) - return -ENXIO; + ControllerNumber > DAC960_ControllerCount - 1) { + break; + } Controller = DAC960_Controllers[ControllerNumber]; - if (Controller == NULL) return -ENXIO; + if (Controller == NULL) + break;; memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T)); ControllerInfo.ControllerNumber = ControllerNumber; ControllerInfo.FirmwareType = Controller->FirmwareType; @@ -6665,8 +6673,9 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, ControllerInfo.PCI_Address = Controller->PCI_Address; strcpy(ControllerInfo.ModelName, Controller->ModelName); strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion); - return (copy_to_user(UserSpaceControllerInfo, &ControllerInfo, + ErrorCode = (copy_to_user(UserSpaceControllerInfo, &ControllerInfo, sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0); + break; } case DAC960_IOCTL_V1_EXECUTE_COMMAND: { @@ -6684,30 +6693,39 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, int ControllerNumber, DataTransferLength; unsigned char *DataTransferBuffer = NULL; dma_addr_t DataTransferBufferDMA; - if (UserSpaceUserCommand == NULL) return -EINVAL; + if (UserSpaceUserCommand == NULL) { + ErrorCode = -EINVAL; + break; + } if (copy_from_user(&UserCommand, UserSpaceUserCommand, sizeof(DAC960_V1_UserCommand_T))) { ErrorCode = -EFAULT; - goto Failure1a; + break; } ControllerNumber = UserCommand.ControllerNumber; + ErrorCode = -ENXIO; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) - return -ENXIO; + break; Controller = DAC960_Controllers[ControllerNumber]; - if (Controller == NULL) return -ENXIO; - if (Controller->FirmwareType != DAC960_V1_Controller) return -EINVAL; + if (Controller == NULL) + break; + ErrorCode = -EINVAL; + if (Controller->FirmwareType != DAC960_V1_Controller) + break; CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode; DataTransferLength = UserCommand.DataTransferLength; - if (CommandOpcode & 0x80) return -EINVAL; + if (CommandOpcode & 0x80) + break; if (CommandOpcode == DAC960_V1_DCDB) { if (copy_from_user(&DCDB, UserCommand.DCDB, sizeof(DAC960_V1_DCDB_T))) { ErrorCode = -EFAULT; - goto Failure1a; + break; } - if (DCDB.Channel >= DAC960_V1_MaxChannels) return -EINVAL; + if (DCDB.Channel >= DAC960_V1_MaxChannels) + break; if (!((DataTransferLength == 0 && DCDB.Direction == DAC960_V1_DCDB_NoDataTransfer) || @@ -6717,38 +6735,37 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, (DataTransferLength < 0 && DCDB.Direction == DAC960_V1_DCDB_DataTransferSystemToDevice))) - return -EINVAL; + break; if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength) != abs(DataTransferLength)) - return -EINVAL; + break; DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA); - if (DCDB_IOBUF == NULL) - return -ENOMEM; + if (DCDB_IOBUF == NULL) { + ErrorCode = -ENOMEM; + break; + } } + ErrorCode = -ENOMEM; if (DataTransferLength > 0) { DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice, DataTransferLength, &DataTransferBufferDMA); - if (DataTransferBuffer == NULL) { - ErrorCode = -ENOMEM; - goto Failure1; - } + if (DataTransferBuffer == NULL) + break; memset(DataTransferBuffer, 0, DataTransferLength); } else if (DataTransferLength < 0) { DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice, -DataTransferLength, &DataTransferBufferDMA); - if (DataTransferBuffer == NULL) { - ErrorCode = -ENOMEM; - goto Failure1; - } + if (DataTransferBuffer == NULL) + break; if (copy_from_user(DataTransferBuffer, UserCommand.DataTransferBuffer, -DataTransferLength)) { ErrorCode = -EFAULT; - goto Failure1; + break; } } if (CommandOpcode == DAC960_V1_DCDB) @@ -6825,8 +6842,7 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, if (DCDB_IOBUF != NULL) pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T), DCDB_IOBUF, DCDB_IOBUFDMA); - Failure1a: - return ErrorCode; + break; } case DAC960_IOCTL_V2_EXECUTE_COMMAND: { @@ -6844,32 +6860,43 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, dma_addr_t DataTransferBufferDMA; unsigned char *RequestSenseBuffer = NULL; dma_addr_t RequestSenseBufferDMA; - if (UserSpaceUserCommand == NULL) return -EINVAL; + + ErrorCode = -EINVAL; + if (UserSpaceUserCommand == NULL) + break; if (copy_from_user(&UserCommand, UserSpaceUserCommand, sizeof(DAC960_V2_UserCommand_T))) { ErrorCode = -EFAULT; - goto Failure2a; + break; } + ErrorCode = -ENXIO; ControllerNumber = UserCommand.ControllerNumber; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) - return -ENXIO; + break; Controller = DAC960_Controllers[ControllerNumber]; - if (Controller == NULL) return -ENXIO; - if (Controller->FirmwareType != DAC960_V2_Controller) return -EINVAL; + if (Controller == NULL) + break; + if (Controller->FirmwareType != DAC960_V2_Controller){ + ErrorCode = -EINVAL; + break; + } DataTransferLength = UserCommand.DataTransferLength; + ErrorCode = -ENOMEM; if (DataTransferLength > 0) { DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice, DataTransferLength, &DataTransferBufferDMA); - if (DataTransferBuffer == NULL) return -ENOMEM; + if (DataTransferBuffer == NULL) + break; memset(DataTransferBuffer, 0, DataTransferLength); } else if (DataTransferLength < 0) { DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice, -DataTransferLength, &DataTransferBufferDMA); - if (DataTransferBuffer == NULL) return -ENOMEM; + if (DataTransferBuffer == NULL) + break; if (copy_from_user(DataTransferBuffer, UserCommand.DataTransferBuffer, -DataTransferLength)) { @@ -6979,8 +7006,7 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, if (RequestSenseBuffer != NULL) pci_free_consistent(Controller->PCIDevice, RequestSenseLength, RequestSenseBuffer, RequestSenseBufferDMA); - Failure2a: - return ErrorCode; + break; } case DAC960_IOCTL_V2_GET_HEALTH_STATUS: { @@ -6990,21 +7016,33 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer; DAC960_Controller_T *Controller; int ControllerNumber; - if (UserSpaceGetHealthStatus == NULL) return -EINVAL; + if (UserSpaceGetHealthStatus == NULL) { + ErrorCode = -EINVAL; + break; + } if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus, - sizeof(DAC960_V2_GetHealthStatus_T))) - return -EFAULT; + sizeof(DAC960_V2_GetHealthStatus_T))) { + ErrorCode = -EFAULT; + break; + } + ErrorCode = -ENXIO; ControllerNumber = GetHealthStatus.ControllerNumber; if (ControllerNumber < 0 || ControllerNumber > DAC960_ControllerCount - 1) - return -ENXIO; + break; Controller = DAC960_Controllers[ControllerNumber]; - if (Controller == NULL) return -ENXIO; - if (Controller->FirmwareType != DAC960_V2_Controller) return -EINVAL; + if (Controller == NULL) + break; + if (Controller->FirmwareType != DAC960_V2_Controller) { + ErrorCode = -EINVAL; + break; + } if (copy_from_user(&HealthStatusBuffer, GetHealthStatus.HealthStatusBuffer, - sizeof(DAC960_V2_HealthStatusBuffer_T))) - return -EFAULT; + sizeof(DAC960_V2_HealthStatusBuffer_T))) { + ErrorCode = -EFAULT; + break; + } while (Controller->V2.HealthStatusBuffer->StatusChangeCounter == HealthStatusBuffer.StatusChangeCounter && Controller->V2.HealthStatusBuffer->NextEventSequenceNumber @@ -7012,21 +7050,28 @@ static int DAC960_gam_ioctl(struct inode *inode, struct file *file, { interruptible_sleep_on_timeout(&Controller->HealthStatusWaitQueue, DAC960_MonitoringTimerInterval); - if (signal_pending(current)) return -EINTR; + if (signal_pending(current)) { + ErrorCode = -EINTR; + break; + } } if (copy_to_user(GetHealthStatus.HealthStatusBuffer, Controller->V2.HealthStatusBuffer, sizeof(DAC960_V2_HealthStatusBuffer_T))) - return -EFAULT; - return 0; + ErrorCode = -EFAULT; + else + ErrorCode = 0; } + default: + ErrorCode = -ENOTTY; } - return -EINVAL; + unlock_kernel(); + return ErrorCode; } static const struct file_operations DAC960_gam_fops = { .owner = THIS_MODULE, - .ioctl = DAC960_gam_ioctl + .unlocked_ioctl = DAC960_gam_ioctl }; static struct miscdevice DAC960_gam_dev = { -- cgit v1.2.3 From 27f8221af406e43b529a5425bc99c9b1e9bdf521 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 4 Jul 2008 09:30:03 +0200 Subject: block: add blk_queue_update_dma_pad This adds blk_queue_update_dma_pad to prevent LLDs from overwriting the dma pad mask wrongly (we added blk_queue_update_dma_alignment due to the same reason). This also converts libata to use blk_queue_update_dma_pad instead of blk_queue_dma_pad. Signed-off-by: FUJITA Tomonori Cc: Tejun Heo Cc: Bartlomiej Zolnierkiewicz Cc: Thomas Bogendoerfer Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- block/blk-settings.c | 24 ++++++++++++++++++++---- drivers/ata/libata-scsi.c | 3 ++- include/linux/blkdev.h | 1 + 3 files changed, 23 insertions(+), 5 deletions(-) diff --git a/block/blk-settings.c b/block/blk-settings.c index 8dd86418f35d..dfc77012843f 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -302,11 +302,10 @@ EXPORT_SYMBOL(blk_queue_stack_limits); * @q: the request queue for the device * @mask: pad mask * - * Set pad mask. Direct IO requests are padded to the mask specified. + * Set dma pad mask. * - * Appending pad buffer to a request modifies ->data_len such that it - * includes the pad buffer. The original requested data length can be - * obtained using blk_rq_raw_data_len(). + * Appending pad buffer to a request modifies the last entry of a + * scatter list such that it includes the pad buffer. **/ void blk_queue_dma_pad(struct request_queue *q, unsigned int mask) { @@ -314,6 +313,23 @@ void blk_queue_dma_pad(struct request_queue *q, unsigned int mask) } EXPORT_SYMBOL(blk_queue_dma_pad); +/** + * blk_queue_update_dma_pad - update pad mask + * @q: the request queue for the device + * @mask: pad mask + * + * Update dma pad mask. + * + * Appending pad buffer to a request modifies the last entry of a + * scatter list such that it includes the pad buffer. + **/ +void blk_queue_update_dma_pad(struct request_queue *q, unsigned int mask) +{ + if (mask > q->dma_pad_mask) + q->dma_pad_mask = mask; +} +EXPORT_SYMBOL(blk_queue_update_dma_pad); + /** * blk_queue_dma_drain - Set up a drain buffer for excess dma. * @q: the request queue for the device diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 57a43649a461..499ccc628d81 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -885,7 +885,8 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, /* set the min alignment and padding */ blk_queue_update_dma_alignment(sdev->request_queue, ATA_DMA_PAD_SZ - 1); - blk_queue_dma_pad(sdev->request_queue, ATA_DMA_PAD_SZ - 1); + blk_queue_update_dma_pad(sdev->request_queue, + ATA_DMA_PAD_SZ - 1); /* configure draining */ buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index e04c4ac8a7cf..1ffd8bfdc4c9 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -776,6 +776,7 @@ extern void blk_queue_max_segment_size(struct request_queue *, unsigned int); extern void blk_queue_hardsect_size(struct request_queue *, unsigned short); extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b); extern void blk_queue_dma_pad(struct request_queue *, unsigned int); +extern void blk_queue_update_dma_pad(struct request_queue *, unsigned int); extern int blk_queue_dma_drain(struct request_queue *q, dma_drain_needed_fn *dma_drain_needed, void *buf, unsigned int size); -- cgit v1.2.3 From 30c00eda73d5db5bd64dd0c370161abd8df5ba4a Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 4 Jul 2008 09:31:11 +0200 Subject: block: blk_rq_map_kern uses the bounce buffers for stack buffers blk_rq_map_kern is used for kernel internal I/Os. Some callers use this function with stack buffers but DMA to/from the stack buffers leads to memory corruption on a non-coherent platform. This patch make blk_rq_map_kern uses the bounce buffers if a caller passes a stack buffer (on the all platforms for simplicity). Signed-off-by: FUJITA Tomonori Cc: Bartlomiej Zolnierkiewicz Cc: Thomas Bogendoerfer Cc: Tejun Heo Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- block/blk-map.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/block/blk-map.c b/block/blk-map.c index 813011ef8276..ddd96fb11a7d 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -269,6 +269,7 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf, int reading = rq_data_dir(rq) == READ; int do_copy = 0; struct bio *bio; + unsigned long stack_mask = ~(THREAD_SIZE - 1); if (len > (q->max_hw_sectors << 9)) return -EINVAL; @@ -279,6 +280,10 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf, alignment = queue_dma_alignment(q) | q->dma_pad_mask; do_copy = ((kaddr & alignment) || (len & alignment)); + if (!((kaddr & stack_mask) ^ + ((unsigned long)current->stack & stack_mask))) + do_copy = 1; + if (do_copy) bio = bio_copy_kern(q, kbuf, len, gfp_mask, reading); else -- cgit v1.2.3 From 62858dacc8dea55c5bdb474ccd8acb0657e23dd0 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 4 Jul 2008 09:31:50 +0200 Subject: scsi: sr avoids useless buffer allocation blk_rq_map_kern can handle the stack buffers correctly (avoid DMA from/to the stack buffers by using the bounce buffer) so we don't need to complicate the code by allocating just 8 bytes. Signed-off-by: FUJITA Tomonori Cc: James Bottomley Cc: Bartlomiej Zolnierkiewicz Cc: Thomas Bogendoerfer Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/scsi/sr.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index c82df8bd4d89..27f5bfd1def3 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -673,24 +673,20 @@ fail: static void get_sectorsize(struct scsi_cd *cd) { unsigned char cmd[10]; - unsigned char *buffer; + unsigned char buffer[8]; int the_result, retries = 3; int sector_size; struct request_queue *queue; - buffer = kmalloc(512, GFP_KERNEL | GFP_DMA); - if (!buffer) - goto Enomem; - do { cmd[0] = READ_CAPACITY; memset((void *) &cmd[1], 0, 9); - memset(buffer, 0, 8); + memset(buffer, 0, sizeof(buffer)); /* Do the command and wait.. */ the_result = scsi_execute_req(cd->device, cmd, DMA_FROM_DEVICE, - buffer, 8, NULL, SR_TIMEOUT, - MAX_RETRIES); + buffer, sizeof(buffer), NULL, + SR_TIMEOUT, MAX_RETRIES); retries--; @@ -745,14 +741,8 @@ static void get_sectorsize(struct scsi_cd *cd) queue = cd->device->request_queue; blk_queue_hardsect_size(queue, sector_size); -out: - kfree(buffer); - return; -Enomem: - cd->capacity = 0x1fffff; - cd->device->sector_size = 2048; /* A guess, just in case */ - goto out; + return; } static void get_capabilities(struct scsi_cd *cd) -- cgit v1.2.3 From fce5384755e8e0e56c5609d2972db4702990d592 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Fri, 4 Jul 2008 09:33:01 +0200 Subject: cdrom: revert commit 22a9189 (cdrom: use kmalloced buffers instead of buffers on stack) The commit 22a9189fd073db3d03a4cf8b8c098aa207602de1 (cdrom: use kmalloced buffers instead of buffers on stack) is introduced to use kmalloced buffers for packet commands to avoid stack corruption on non coherent platforms. SCSI cdrom uses blk_rq_map_kern, which properly avoids DMA on the stack by using the bounce buffers. IDE cdrom also has the mechnism to avoids DMA on the stack. So we don't need this extra complexitiy in cdrom.c, such as allocating just 8 bytes. The lower layers can handle it. Signed-off-by: FUJITA Tomonori Cc: Thomas Bogendoerfer Cc: Bartlomiej Zolnierkiewicz Cc: Thomas Bogendoerfer Cc: Tejun Heo Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/cdrom/cdrom.c | 274 +++++++++++++++++--------------------------------- 1 file changed, 93 insertions(+), 181 deletions(-) diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index 69f26eb6415b..a5da35632651 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -461,37 +461,27 @@ int cdrom_get_media_event(struct cdrom_device_info *cdi, struct media_event_desc *med) { struct packet_command cgc; - unsigned char *buffer; - struct event_header *eh; - int ret = 1; - - buffer = kmalloc(8, GFP_KERNEL); - if (!buffer) - return -ENOMEM; + unsigned char buffer[8]; + struct event_header *eh = (struct event_header *) buffer; - eh = (struct event_header *)buffer; - - init_cdrom_command(&cgc, buffer, 8, CGC_DATA_READ); + init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ); cgc.cmd[0] = GPCMD_GET_EVENT_STATUS_NOTIFICATION; cgc.cmd[1] = 1; /* IMMED */ cgc.cmd[4] = 1 << 4; /* media event */ - cgc.cmd[8] = 8; + cgc.cmd[8] = sizeof(buffer); cgc.quiet = 1; if (cdi->ops->generic_packet(cdi, &cgc)) - goto err; + return 1; if (be16_to_cpu(eh->data_len) < sizeof(*med)) - goto err; + return 1; if (eh->nea || eh->notification_class != 0x4) - goto err; + return 1; - memcpy(med, buffer + sizeof(*eh), sizeof(*med)); - ret = 0; -err: - kfree(buffer); - return ret; + memcpy(med, &buffer[sizeof(*eh)], sizeof(*med)); + return 0; } /* @@ -501,82 +491,68 @@ err: static int cdrom_mrw_probe_pc(struct cdrom_device_info *cdi) { struct packet_command cgc; - char *buffer; - int ret = 1; - - buffer = kmalloc(16, GFP_KERNEL); - if (!buffer) - return -ENOMEM; + char buffer[16]; - init_cdrom_command(&cgc, buffer, 16, CGC_DATA_READ); + init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ); cgc.timeout = HZ; cgc.quiet = 1; if (!cdrom_mode_sense(cdi, &cgc, MRW_MODE_PC, 0)) { cdi->mrw_mode_page = MRW_MODE_PC; - ret = 0; + return 0; } else if (!cdrom_mode_sense(cdi, &cgc, MRW_MODE_PC_PRE1, 0)) { cdi->mrw_mode_page = MRW_MODE_PC_PRE1; - ret = 0; + return 0; } - kfree(buffer); - return ret; + + return 1; } static int cdrom_is_mrw(struct cdrom_device_info *cdi, int *write) { struct packet_command cgc; struct mrw_feature_desc *mfd; - unsigned char *buffer; + unsigned char buffer[16]; int ret; *write = 0; - buffer = kmalloc(16, GFP_KERNEL); - if (!buffer) - return -ENOMEM; - init_cdrom_command(&cgc, buffer, 16, CGC_DATA_READ); + init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ); cgc.cmd[0] = GPCMD_GET_CONFIGURATION; cgc.cmd[3] = CDF_MRW; - cgc.cmd[8] = 16; + cgc.cmd[8] = sizeof(buffer); cgc.quiet = 1; if ((ret = cdi->ops->generic_packet(cdi, &cgc))) - goto err; + return ret; mfd = (struct mrw_feature_desc *)&buffer[sizeof(struct feature_header)]; - if (be16_to_cpu(mfd->feature_code) != CDF_MRW) { - ret = 1; - goto err; - } + if (be16_to_cpu(mfd->feature_code) != CDF_MRW) + return 1; *write = mfd->write; if ((ret = cdrom_mrw_probe_pc(cdi))) { *write = 0; + return ret; } -err: - kfree(buffer); - return ret; + + return 0; } static int cdrom_mrw_bgformat(struct cdrom_device_info *cdi, int cont) { struct packet_command cgc; - unsigned char *buffer; + unsigned char buffer[12]; int ret; printk(KERN_INFO "cdrom: %sstarting format\n", cont ? "Re" : ""); - buffer = kmalloc(12, GFP_KERNEL); - if (!buffer) - return -ENOMEM; - /* * FmtData bit set (bit 4), format type is 1 */ - init_cdrom_command(&cgc, buffer, 12, CGC_DATA_WRITE); + init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_WRITE); cgc.cmd[0] = GPCMD_FORMAT_UNIT; cgc.cmd[1] = (1 << 4) | 1; @@ -603,7 +579,6 @@ static int cdrom_mrw_bgformat(struct cdrom_device_info *cdi, int cont) if (ret) printk(KERN_INFO "cdrom: bgformat failed\n"); - kfree(buffer); return ret; } @@ -663,17 +638,16 @@ static int cdrom_mrw_set_lba_space(struct cdrom_device_info *cdi, int space) { struct packet_command cgc; struct mode_page_header *mph; - char *buffer; + char buffer[16]; int ret, offset, size; - buffer = kmalloc(16, GFP_KERNEL); - if (!buffer) - return -ENOMEM; + init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ); - init_cdrom_command(&cgc, buffer, 16, CGC_DATA_READ); + cgc.buffer = buffer; + cgc.buflen = sizeof(buffer); if ((ret = cdrom_mode_sense(cdi, &cgc, cdi->mrw_mode_page, 0))) - goto err; + return ret; mph = (struct mode_page_header *) buffer; offset = be16_to_cpu(mph->desc_length); @@ -683,70 +657,55 @@ static int cdrom_mrw_set_lba_space(struct cdrom_device_info *cdi, int space) cgc.buflen = size; if ((ret = cdrom_mode_select(cdi, &cgc))) - goto err; + return ret; printk(KERN_INFO "cdrom: %s: mrw address space %s selected\n", cdi->name, mrw_address_space[space]); - ret = 0; -err: - kfree(buffer); - return ret; + return 0; } static int cdrom_get_random_writable(struct cdrom_device_info *cdi, struct rwrt_feature_desc *rfd) { struct packet_command cgc; - char *buffer; + char buffer[24]; int ret; - buffer = kmalloc(24, GFP_KERNEL); - if (!buffer) - return -ENOMEM; - - init_cdrom_command(&cgc, buffer, 24, CGC_DATA_READ); + init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ); cgc.cmd[0] = GPCMD_GET_CONFIGURATION; /* often 0x46 */ cgc.cmd[3] = CDF_RWRT; /* often 0x0020 */ - cgc.cmd[8] = 24; /* often 0x18 */ + cgc.cmd[8] = sizeof(buffer); /* often 0x18 */ cgc.quiet = 1; if ((ret = cdi->ops->generic_packet(cdi, &cgc))) - goto err; + return ret; memcpy(rfd, &buffer[sizeof(struct feature_header)], sizeof (*rfd)); - ret = 0; -err: - kfree(buffer); - return ret; + return 0; } static int cdrom_has_defect_mgt(struct cdrom_device_info *cdi) { struct packet_command cgc; - char *buffer; + char buffer[16]; __be16 *feature_code; int ret; - buffer = kmalloc(16, GFP_KERNEL); - if (!buffer) - return -ENOMEM; - - init_cdrom_command(&cgc, buffer, 16, CGC_DATA_READ); + init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ); cgc.cmd[0] = GPCMD_GET_CONFIGURATION; cgc.cmd[3] = CDF_HWDM; - cgc.cmd[8] = 16; + cgc.cmd[8] = sizeof(buffer); cgc.quiet = 1; if ((ret = cdi->ops->generic_packet(cdi, &cgc))) - goto err; + return ret; feature_code = (__be16 *) &buffer[sizeof(struct feature_header)]; if (be16_to_cpu(*feature_code) == CDF_HWDM) - ret = 0; -err: - kfree(buffer); - return ret; + return 0; + + return 1; } @@ -837,14 +796,10 @@ static int cdrom_mrw_open_write(struct cdrom_device_info *cdi) static int mo_open_write(struct cdrom_device_info *cdi) { struct packet_command cgc; - char *buffer; + char buffer[255]; int ret; - buffer = kmalloc(255, GFP_KERNEL); - if (!buffer) - return -ENOMEM; - - init_cdrom_command(&cgc, buffer, 4, CGC_DATA_READ); + init_cdrom_command(&cgc, &buffer, 4, CGC_DATA_READ); cgc.quiet = 1; /* @@ -861,15 +816,10 @@ static int mo_open_write(struct cdrom_device_info *cdi) } /* drive gave us no info, let the user go ahead */ - if (ret) { - ret = 0; - goto err; - } + if (ret) + return 0; - ret = buffer[3] & 0x80; -err: - kfree(buffer); - return ret; + return buffer[3] & 0x80; } static int cdrom_ram_open_write(struct cdrom_device_info *cdi) @@ -892,19 +842,15 @@ static int cdrom_ram_open_write(struct cdrom_device_info *cdi) static void cdrom_mmc3_profile(struct cdrom_device_info *cdi) { struct packet_command cgc; - char *buffer; + char buffer[32]; int ret, mmc3_profile; - buffer = kmalloc(32, GFP_KERNEL); - if (!buffer) - return; - - init_cdrom_command(&cgc, buffer, 32, CGC_DATA_READ); + init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_READ); cgc.cmd[0] = GPCMD_GET_CONFIGURATION; cgc.cmd[1] = 0; cgc.cmd[2] = cgc.cmd[3] = 0; /* Starting Feature Number */ - cgc.cmd[8] = 32; /* Allocation Length */ + cgc.cmd[8] = sizeof(buffer); /* Allocation Length */ cgc.quiet = 1; if ((ret = cdi->ops->generic_packet(cdi, &cgc))) @@ -913,7 +859,6 @@ static void cdrom_mmc3_profile(struct cdrom_device_info *cdi) mmc3_profile = (buffer[6] << 8) | buffer[7]; cdi->mmc3_profile = mmc3_profile; - kfree(buffer); } static int cdrom_is_dvd_rw(struct cdrom_device_info *cdi) @@ -1628,15 +1573,12 @@ static void setup_send_key(struct packet_command *cgc, unsigned agid, unsigned t static int dvd_do_auth(struct cdrom_device_info *cdi, dvd_authinfo *ai) { int ret; - u_char *buf; + u_char buf[20]; struct packet_command cgc; struct cdrom_device_ops *cdo = cdi->ops; - rpc_state_t *rpc_state; - - buf = kzalloc(20, GFP_KERNEL); - if (!buf) - return -ENOMEM; + rpc_state_t rpc_state; + memset(buf, 0, sizeof(buf)); init_cdrom_command(&cgc, buf, 0, CGC_DATA_READ); switch (ai->type) { @@ -1647,7 +1589,7 @@ static int dvd_do_auth(struct cdrom_device_info *cdi, dvd_authinfo *ai) setup_report_key(&cgc, ai->lsa.agid, 0); if ((ret = cdo->generic_packet(cdi, &cgc))) - goto err; + return ret; ai->lsa.agid = buf[7] >> 6; /* Returning data, let host change state */ @@ -1658,7 +1600,7 @@ static int dvd_do_auth(struct cdrom_device_info *cdi, dvd_authinfo *ai) setup_report_key(&cgc, ai->lsk.agid, 2); if ((ret = cdo->generic_packet(cdi, &cgc))) - goto err; + return ret; copy_key(ai->lsk.key, &buf[4]); /* Returning data, let host change state */ @@ -1669,7 +1611,7 @@ static int dvd_do_auth(struct cdrom_device_info *cdi, dvd_authinfo *ai) setup_report_key(&cgc, ai->lsc.agid, 1); if ((ret = cdo->generic_packet(cdi, &cgc))) - goto err; + return ret; copy_chal(ai->lsc.chal, &buf[4]); /* Returning data, let host change state */ @@ -1686,7 +1628,7 @@ static int dvd_do_auth(struct cdrom_device_info *cdi, dvd_authinfo *ai) cgc.cmd[2] = ai->lstk.lba >> 24; if ((ret = cdo->generic_packet(cdi, &cgc))) - goto err; + return ret; ai->lstk.cpm = (buf[4] >> 7) & 1; ai->lstk.cp_sec = (buf[4] >> 6) & 1; @@ -1700,7 +1642,7 @@ static int dvd_do_auth(struct cdrom_device_info *cdi, dvd_authinfo *ai) setup_report_key(&cgc, ai->lsasf.agid, 5); if ((ret = cdo->generic_packet(cdi, &cgc))) - goto err; + return ret; ai->lsasf.asf = buf[7] & 1; break; @@ -1713,7 +1655,7 @@ static int dvd_do_auth(struct cdrom_device_info *cdi, dvd_authinfo *ai) copy_chal(&buf[4], ai->hsc.chal); if ((ret = cdo->generic_packet(cdi, &cgc))) - goto err; + return ret; ai->type = DVD_LU_SEND_KEY1; break; @@ -1726,7 +1668,7 @@ static int dvd_do_auth(struct cdrom_device_info *cdi, dvd_authinfo *ai) if ((ret = cdo->generic_packet(cdi, &cgc))) { ai->type = DVD_AUTH_FAILURE; - goto err; + return ret; } ai->type = DVD_AUTH_ESTABLISHED; break; @@ -1737,23 +1679,24 @@ static int dvd_do_auth(struct cdrom_device_info *cdi, dvd_authinfo *ai) cdinfo(CD_DVD, "entering DVD_INVALIDATE_AGID\n"); setup_report_key(&cgc, ai->lsa.agid, 0x3f); if ((ret = cdo->generic_packet(cdi, &cgc))) - goto err; + return ret; break; /* Get region settings */ case DVD_LU_SEND_RPC_STATE: cdinfo(CD_DVD, "entering DVD_LU_SEND_RPC_STATE\n"); setup_report_key(&cgc, 0, 8); + memset(&rpc_state, 0, sizeof(rpc_state_t)); + cgc.buffer = (char *) &rpc_state; if ((ret = cdo->generic_packet(cdi, &cgc))) - goto err; + return ret; - rpc_state = (rpc_state_t *)buf; - ai->lrpcs.type = rpc_state->type_code; - ai->lrpcs.vra = rpc_state->vra; - ai->lrpcs.ucca = rpc_state->ucca; - ai->lrpcs.region_mask = rpc_state->region_mask; - ai->lrpcs.rpc_scheme = rpc_state->rpc_scheme; + ai->lrpcs.type = rpc_state.type_code; + ai->lrpcs.vra = rpc_state.vra; + ai->lrpcs.ucca = rpc_state.ucca; + ai->lrpcs.region_mask = rpc_state.region_mask; + ai->lrpcs.rpc_scheme = rpc_state.rpc_scheme; break; /* Set region settings */ @@ -1764,23 +1707,20 @@ static int dvd_do_auth(struct cdrom_device_info *cdi, dvd_authinfo *ai) buf[4] = ai->hrpcs.pdrc; if ((ret = cdo->generic_packet(cdi, &cgc))) - goto err; + return ret; break; default: cdinfo(CD_WARNING, "Invalid DVD key ioctl (%d)\n", ai->type); - ret = -ENOTTY; - goto err; + return -ENOTTY; } - ret = 0; -err: - kfree(buf); - return ret; + + return 0; } static int dvd_read_physical(struct cdrom_device_info *cdi, dvd_struct *s) { - unsigned char *buf, *base; + unsigned char buf[21], *base; struct dvd_layer *layer; struct packet_command cgc; struct cdrom_device_ops *cdo = cdi->ops; @@ -1789,11 +1729,7 @@ static int dvd_read_physical(struct cdrom_device_info *cdi, dvd_struct *s) if (layer_num >= DVD_LAYERS) return -EINVAL; - buf = kmalloc(21, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - init_cdrom_command(&cgc, buf, 21, CGC_DATA_READ); + init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_READ); cgc.cmd[0] = GPCMD_READ_DVD_STRUCTURE; cgc.cmd[6] = layer_num; cgc.cmd[7] = s->type; @@ -1805,7 +1741,7 @@ static int dvd_read_physical(struct cdrom_device_info *cdi, dvd_struct *s) cgc.quiet = 1; if ((ret = cdo->generic_packet(cdi, &cgc))) - goto err; + return ret; base = &buf[4]; layer = &s->physical.layer[layer_num]; @@ -1829,24 +1765,17 @@ static int dvd_read_physical(struct cdrom_device_info *cdi, dvd_struct *s) layer->end_sector_l0 = base[13] << 16 | base[14] << 8 | base[15]; layer->bca = base[16] >> 7; - ret = 0; -err: - kfree(buf); - return ret; + return 0; } static int dvd_read_copyright(struct cdrom_device_info *cdi, dvd_struct *s) { int ret; - u_char *buf; + u_char buf[8]; struct packet_command cgc; struct cdrom_device_ops *cdo = cdi->ops; - buf = kmalloc(8, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - init_cdrom_command(&cgc, buf, 8, CGC_DATA_READ); + init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_READ); cgc.cmd[0] = GPCMD_READ_DVD_STRUCTURE; cgc.cmd[6] = s->copyright.layer_num; cgc.cmd[7] = s->type; @@ -1854,15 +1783,12 @@ static int dvd_read_copyright(struct cdrom_device_info *cdi, dvd_struct *s) cgc.cmd[9] = cgc.buflen & 0xff; if ((ret = cdo->generic_packet(cdi, &cgc))) - goto err; + return ret; s->copyright.cpst = buf[4]; s->copyright.rmi = buf[5]; - ret = 0; -err: - kfree(buf); - return ret; + return 0; } static int dvd_read_disckey(struct cdrom_device_info *cdi, dvd_struct *s) @@ -1894,33 +1820,26 @@ static int dvd_read_disckey(struct cdrom_device_info *cdi, dvd_struct *s) static int dvd_read_bca(struct cdrom_device_info *cdi, dvd_struct *s) { int ret; - u_char *buf; + u_char buf[4 + 188]; struct packet_command cgc; struct cdrom_device_ops *cdo = cdi->ops; - buf = kmalloc(4 + 188, GFP_KERNEL); - if (!buf) - return -ENOMEM; - - init_cdrom_command(&cgc, buf, 4 + 188, CGC_DATA_READ); + init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_READ); cgc.cmd[0] = GPCMD_READ_DVD_STRUCTURE; cgc.cmd[7] = s->type; cgc.cmd[9] = cgc.buflen & 0xff; if ((ret = cdo->generic_packet(cdi, &cgc))) - goto err; + return ret; s->bca.len = buf[0] << 8 | buf[1]; if (s->bca.len < 12 || s->bca.len > 188) { cdinfo(CD_WARNING, "Received invalid BCA length (%d)\n", s->bca.len); - ret = -EIO; - goto err; + return -EIO; } memcpy(s->bca.value, &buf[4], s->bca.len); - ret = 0; -err: - kfree(buf); - return ret; + + return 0; } static int dvd_read_manufact(struct cdrom_device_info *cdi, dvd_struct *s) @@ -2020,13 +1939,9 @@ static int cdrom_read_subchannel(struct cdrom_device_info *cdi, { struct cdrom_device_ops *cdo = cdi->ops; struct packet_command cgc; - char *buffer; + char buffer[32]; int ret; - buffer = kmalloc(32, GFP_KERNEL); - if (!buffer) - return -ENOMEM; - init_cdrom_command(&cgc, buffer, 16, CGC_DATA_READ); cgc.cmd[0] = GPCMD_READ_SUBCHANNEL; cgc.cmd[1] = 2; /* MSF addressing */ @@ -2035,7 +1950,7 @@ static int cdrom_read_subchannel(struct cdrom_device_info *cdi, cgc.cmd[8] = 16; if ((ret = cdo->generic_packet(cdi, &cgc))) - goto err; + return ret; subchnl->cdsc_audiostatus = cgc.buffer[1]; subchnl->cdsc_format = CDROM_MSF; @@ -2050,10 +1965,7 @@ static int cdrom_read_subchannel(struct cdrom_device_info *cdi, subchnl->cdsc_absaddr.msf.second = cgc.buffer[10]; subchnl->cdsc_absaddr.msf.frame = cgc.buffer[11]; - ret = 0; -err: - kfree(buffer); - return ret; + return 0; } /* -- cgit v1.2.3 From 7c0c0b5b19611ac15eec69043cb5588f6cbfbd7b Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Fri, 4 Jul 2008 09:33:17 +0200 Subject: drivers/block/pktcdvd.c: avoid useless memset Avoid the 'memset(...,0, ...)' before calling 'init_cdrom_command' because this function already does it. Signed-off-by: Christophe Jaillet Acked-by: Peter Osterlund Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- drivers/block/pktcdvd.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 85e44d07eab8..45bee918c46a 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -2080,7 +2080,6 @@ static noinline_for_stack int pkt_write_caching(struct pktcdvd_device *pd, unsigned char buf[64]; int ret; - memset(buf, 0, sizeof(buf)); init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_READ); cgc.sense = &sense; cgc.buflen = pd->mode_offset + 12; @@ -2127,7 +2126,6 @@ static noinline_for_stack int pkt_get_max_speed(struct pktcdvd_device *pd, unsigned char *cap_buf; int ret, offset; - memset(buf, 0, sizeof(buf)); cap_buf = &buf[sizeof(struct mode_page_header) + pd->mode_offset]; init_cdrom_command(&cgc, buf, sizeof(buf), CGC_DATA_UNKNOWN); cgc.sense = &sense; -- cgit v1.2.3 From 8b3d3567f72aa61d5d6f4ce89d289b154e1ea866 Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Fri, 4 Jul 2008 09:33:33 +0200 Subject: ramfs: enable splice write Signed-off-by: Octavian Purdila Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- fs/ramfs/file-mmu.c | 1 + fs/ramfs/file-nommu.c | 1 + 2 files changed, 2 insertions(+) diff --git a/fs/ramfs/file-mmu.c b/fs/ramfs/file-mmu.c index 9590b9024300..78f613cb9c76 100644 --- a/fs/ramfs/file-mmu.c +++ b/fs/ramfs/file-mmu.c @@ -45,6 +45,7 @@ const struct file_operations ramfs_file_operations = { .mmap = generic_file_mmap, .fsync = simple_sync_file, .splice_read = generic_file_splice_read, + .splice_write = generic_file_splice_write, .llseek = generic_file_llseek, }; diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c index 0989bc2c2f69..52312ec93ff4 100644 --- a/fs/ramfs/file-nommu.c +++ b/fs/ramfs/file-nommu.c @@ -43,6 +43,7 @@ const struct file_operations ramfs_file_operations = { .aio_write = generic_file_aio_write, .fsync = simple_sync_file, .splice_read = generic_file_splice_read, + .splice_write = generic_file_splice_write, .llseek = generic_file_llseek, }; -- cgit v1.2.3 From 32502b8413a77b54b9e19809404109590c32dfb7 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Fri, 4 Jul 2008 09:35:17 +0200 Subject: splice: fix generic_file_splice_read() race with page invalidation If a page was invalidated during splicing from file to a pipe, then generic_file_splice_read() could return a short or zero count. This manifested itself in rare I/O errors seen on nfs exported fuse filesystems. This is because nfsd uses splice_direct_to_actor() to read files, and fuse uses invalidate_inode_pages2() to invalidate stale data on open. Fix by redoing the page find/create if it was found to be truncated (invalidated). Signed-off-by: Miklos Szeredi Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- fs/splice.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/fs/splice.c b/fs/splice.c index aa5f6f60b305..399442179d89 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -379,13 +379,22 @@ __generic_file_splice_read(struct file *in, loff_t *ppos, lock_page(page); /* - * page was truncated, stop here. if this isn't the - * first page, we'll just complete what we already - * added + * Page was truncated, or invalidated by the + * filesystem. Redo the find/create, but this time the + * page is kept locked, so there's no chance of another + * race with truncate/invalidate. */ if (!page->mapping) { unlock_page(page); - break; + page = find_or_create_page(mapping, index, + mapping_gfp_mask(mapping)); + + if (!page) { + error = -ENOMEM; + break; + } + page_cache_release(pages[page_nr]); + pages[page_nr] = page; } /* * page was already under io and is now done, great -- cgit v1.2.3 From ba8dd03ac09f51a69c154b8cb508b701d713a2cd Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 4 Jul 2008 11:26:40 +0200 Subject: generic-ipi: fix s390 build bug forgot to remove #include from linux/smp.h while fixing the original s390 build bug. Patch below fixes this build bug caused by header inclusion dependencies: CC kernel/timer.o In file included from include/linux/spinlock.h:87, from include/linux/smp.h:11, from include/linux/kernel_stat.h:4, from kernel/timer.c:22: include/asm/spinlock.h: In function '__raw_spin_lock': include/asm/spinlock.h:69: error: implicit declaration of function 'smp_processor_id' Signed-off-by: Heiko Carstens Signed-off-by: Ingo Molnar --- include/linux/smp.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/smp.h b/include/linux/smp.h index 55261101d09a..48262f86c969 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -8,7 +8,6 @@ #include #include -#include #include extern void cpu_idle(void); -- cgit v1.2.3 From d8355aca23863be659ec5b7e0393cfbfa91ec221 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 3 Jul 2008 22:10:18 -0700 Subject: xen: fix address truncation in pte mfn<->pfn conversion When converting the page number in a pte/pmd/pud/pgd between machine and pseudo-physical addresses, the converted result was being truncated at 32-bits. This caused failures on machines with more than 4G of physical memory. Signed-off-by: Jeremy Fitzhardinge Cc: "Christopher S. Aker" Cc: Ian Campbell Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index df40bf74ea75..4e527e7893a8 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -185,7 +185,7 @@ static pteval_t pte_mfn_to_pfn(pteval_t val) if (val & _PAGE_PRESENT) { unsigned long mfn = (val & PTE_MASK) >> PAGE_SHIFT; pteval_t flags = val & ~PTE_MASK; - val = (mfn_to_pfn(mfn) << PAGE_SHIFT) | flags; + val = ((pteval_t)mfn_to_pfn(mfn) << PAGE_SHIFT) | flags; } return val; @@ -196,7 +196,7 @@ static pteval_t pte_pfn_to_mfn(pteval_t val) if (val & _PAGE_PRESENT) { unsigned long pfn = (val & PTE_MASK) >> PAGE_SHIFT; pteval_t flags = val & ~PTE_MASK; - val = (pfn_to_mfn(pfn) << PAGE_SHIFT) | flags; + val = ((pteval_t)pfn_to_mfn(pfn) << PAGE_SHIFT) | flags; } return val; -- cgit v1.2.3 From 18d22200740b83a5d968d3236c27c310b3e8fda6 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 3 Jul 2008 19:35:06 +0200 Subject: x86, AMD IOMMU: more verbose Kconfig description text This patch replaces the short description text for AMD IOMMU in Kconfig with a more verbose one. Signed-off-by: Joerg Roedel Cc: iommu@lists.linux-foundation.org Cc: bhavna.sarathy@amd.com Cc: robert.richter@amd.com Cc: Joerg Roedel Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 8aae462f4e01..b120cffae1ee 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -554,7 +554,15 @@ config AMD_IOMMU select SWIOTLB depends on X86_64 && PCI && ACPI help - Select this to get support for AMD IOMMU hardware in your system. + With this option you can enable support for AMD IOMMU hardware in + your system. An IOMMU is a hardware component which provides + remapping of DMA memory accesses from devices. With an AMD IOMMU you + can isolate the the DMA memory of different devices and protect the + system from misbehaving device drivers or hardware. + + You can find out if your system has an AMD IOMMU if you look into + your BIOS for an option to enable it or if you have an IVRS ACPI + table. # need this always selected by IOMMU for the VIA workaround config SWIOTLB -- cgit v1.2.3 From 5f6a59d8ad55781d4d2ff0d327f84aaeed2c4127 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 3 Jul 2008 19:35:07 +0200 Subject: x86, AMD IOMMU: remove unnecessary set_bit_string The set_bit_string call in the address allocator is not necessary because its already called in iommu_area_alloc(). Signed-off-by: Joerg Roedel Cc: iommu@lists.linux-foundation.org Cc: bhavna.sarathy@amd.com Cc: robert.richter@amd.com Cc: Joerg Roedel Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index a1b38561d347..329b2c3f2fed 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -301,7 +301,6 @@ static unsigned long dma_ops_alloc_addresses(struct device *dev, 0, boundary_size, 0); if (likely(address != -1)) { - set_bit_string(dom->bitmap, address, pages); dom->next_bit = address + pages; address <<= PAGE_SHIFT; } else -- cgit v1.2.3 From 999ba417cc1a43881126d08876d5d7e653113ae3 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 3 Jul 2008 19:35:08 +0200 Subject: x86, AMD IOMMU: flush domain TLB when there is more than one page to flush This patch changes the domain TLB flushing behavior of the driver. When there is more than one page to flush it flushes the whole domain TLB instead of every single page. So we send only a single command to the IOMMU in every case which is faster to execute. Signed-off-by: Joerg Roedel Cc: iommu@lists.linux-foundation.org Cc: bhavna.sarathy@amd.com Cc: robert.richter@amd.com Cc: Joerg Roedel Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu.c | 14 ++++++++++---- include/asm-x86/amd_iommu_types.h | 2 ++ 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 329b2c3f2fed..f2766d84c7a0 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -140,16 +140,22 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid, u64 address, size_t size) { - int i; + int s = 0; unsigned pages = to_pages(address, size); address &= PAGE_MASK; - for (i = 0; i < pages; ++i) { - iommu_queue_inv_iommu_pages(iommu, address, domid, 0, 0); - address += PAGE_SIZE; + if (pages > 1) { + /* + * If we have to flush more than one page, flush all + * TLB entries for this domain + */ + address = CMD_INV_IOMMU_ALL_PAGES_ADDRESS; + s = 1; } + iommu_queue_inv_iommu_pages(iommu, address, domid, 0, s); + return 0; } diff --git a/include/asm-x86/amd_iommu_types.h b/include/asm-x86/amd_iommu_types.h index 0f395501ab8e..7bfcb47cc452 100644 --- a/include/asm-x86/amd_iommu_types.h +++ b/include/asm-x86/amd_iommu_types.h @@ -93,6 +93,8 @@ #define CMD_INV_IOMMU_PAGES_SIZE_MASK 0x01 #define CMD_INV_IOMMU_PAGES_PDE_MASK 0x02 +#define CMD_INV_IOMMU_ALL_PAGES_ADDRESS 0x7fffffffffffffffULL + /* macros and definitions for device table entries */ #define DEV_ENTRY_VALID 0x00 #define DEV_ENTRY_TRANSLATION 0x01 -- cgit v1.2.3 From 8b14518fadd9d5915827d86d5c10e602fedf042e Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 3 Jul 2008 19:35:09 +0200 Subject: x86, AMD IOMMU: honor iommu=off instead of amd_iommu=off This patch removes the amd_iommu=off kernel parameter and honors the generic iommu=off parameter for the same purpose. Signed-off-by: Joerg Roedel Cc: iommu@lists.linux-foundation.org Cc: bhavna.sarathy@amd.com Cc: robert.richter@amd.com Cc: Joerg Roedel Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu_init.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 5d9e45c7cea2..c54c82305af4 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -101,8 +101,6 @@ struct ivmd_header { u64 range_length; } __attribute__((packed)); -static int __initdata amd_iommu_disable; - u16 amd_iommu_last_bdf; struct list_head amd_iommu_unity_map; unsigned amd_iommu_aperture_order = 26; @@ -686,7 +684,7 @@ int __init amd_iommu_init(void) int i, ret = 0; - if (amd_iommu_disable) { + if (no_iommu) { printk(KERN_INFO "AMD IOMMU disabled by kernel command line\n"); return 0; } @@ -831,9 +829,6 @@ void __init amd_iommu_detect(void) if (swiotlb || no_iommu || iommu_detected) return; - if (amd_iommu_disable) - return; - if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) { iommu_detected = 1; #ifdef CONFIG_GART_IOMMU @@ -846,8 +841,6 @@ void __init amd_iommu_detect(void) static int __init parse_amd_iommu_options(char *str) { for (; *str; ++str) { - if (strcmp(str, "off") == 0) - amd_iommu_disable = 1; if (strcmp(str, "isolate") == 0) amd_iommu_isolate = 1; } -- cgit v1.2.3 From c1cbebeec4a6be1c1fb54fbf2395ade2534b03c4 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 3 Jul 2008 19:35:10 +0200 Subject: x86, AMD IOMMU: don't try to init IOMMU if early detect code did not detect one This patch adds a check if the early detect code has found AMD IOMMU hardware descriptions and does not try to initialize hardware if the check failed. Signed-off-by: Joerg Roedel Cc: iommu@lists.linux-foundation.org Cc: bhavna.sarathy@amd.com Cc: robert.richter@amd.com Cc: Joerg Roedel Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu_init.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index c54c82305af4..c970fac6fdc6 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -101,6 +101,8 @@ struct ivmd_header { u64 range_length; } __attribute__((packed)); +static int __initdata amd_iommu_detected; + u16 amd_iommu_last_bdf; struct list_head amd_iommu_unity_map; unsigned amd_iommu_aperture_order = 26; @@ -689,6 +691,9 @@ int __init amd_iommu_init(void) return 0; } + if (!amd_iommu_detected) + return -ENODEV; + /* * First parse ACPI tables to find the largest Bus/Dev/Func * we need to handle. Upon this information the shared data @@ -831,6 +836,7 @@ void __init amd_iommu_detect(void) if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) { iommu_detected = 1; + amd_iommu_detected = 1; #ifdef CONFIG_GART_IOMMU gart_iommu_aperture_disabled = 1; gart_iommu_aperture = 0; -- cgit v1.2.3 From fb339690a0506d2aca447b5e888fd6ac39ea4fa2 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 3 Jul 2008 19:35:11 +0200 Subject: x86, AMD IOMMU: remove unnecessary code from the iommu_enable function This code removes a leftover from the iommu_enable function. The ctrl variable is assigned but never used. Signed-off-by: Joerg Roedel Cc: iommu@lists.linux-foundation.org Cc: bhavna.sarathy@amd.com Cc: robert.richter@amd.com Cc: Joerg Roedel Signed-off-by: Ingo Molnar --- arch/x86/kernel/amd_iommu_init.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index c970fac6fdc6..2a13e430437d 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -169,14 +169,11 @@ static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit) void __init iommu_enable(struct amd_iommu *iommu) { - u32 ctrl; - printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at "); print_devid(iommu->devid, 0); printk(" cap 0x%hx\n", iommu->cap_ptr); iommu_feature_enable(iommu, CONTROL_IOMMU_EN); - ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET); } static u8 * __init iommu_map_mmio_space(u64 address) -- cgit v1.2.3 From c4acb2c0669c5c5c9b28e9d02a34b5c67edf7092 Mon Sep 17 00:00:00 2001 From: Gregory Haskins Date: Fri, 27 Jun 2008 14:29:55 -0600 Subject: sched: terminate newidle balancing once at least one task has moved over Inspired by Peter Zijlstra. Signed-off-by: Gregory Haskins Cc: npiggin@suse.de Cc: rostedt@goodmis.org Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/sched.c b/kernel/sched.c index 677c80b9a6b5..d99aeabeb72f 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -3013,6 +3013,10 @@ static int move_tasks(struct rq *this_rq, int this_cpu, struct rq *busiest, max_load_move - total_load_moved, sd, idle, all_pinned, &this_best_prio); class = class->next; + + if (idle == CPU_NEWLY_IDLE && this_rq->nr_running) + break; + } while (class && max_load_move > total_load_moved); return total_load_moved > 0; -- cgit v1.2.3 From 2087a1ad822cd3a68b73338457047fcc54da726b Mon Sep 17 00:00:00 2001 From: Gregory Haskins Date: Fri, 27 Jun 2008 14:30:00 -0600 Subject: sched: add avg-overlap support to RT tasks We have the notion of tracking process-coupling (a.k.a. buddy-wake) via the p->se.last_wake / p->se.avg_overlap facilities, but it is only used for cfs to cfs interactions. There is no reason why an rt to cfs interaction cannot share in establishing a relationhip in a similar manner. Because PREEMPT_RT runs many kernel threads as FIFO priority, we often times have heavy interaction between RT threads waking CFS applications. This patch offers a substantial boost (50-60%+) in perfomance under those circumstances. Signed-off-by: Gregory Haskins Cc: npiggin@suse.de Cc: rostedt@goodmis.org Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar --- kernel/sched.c | 14 ++++++++++++++ kernel/sched_fair.c | 21 ++------------------- 2 files changed, 16 insertions(+), 19 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index d99aeabeb72f..bbc40c3a0657 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1693,6 +1693,12 @@ static void set_load_weight(struct task_struct *p) p->se.load.inv_weight = prio_to_wmult[p->static_prio - MAX_RT_PRIO]; } +static void update_avg(u64 *avg, u64 sample) +{ + s64 diff = sample - *avg; + *avg += diff >> 3; +} + static void enqueue_task(struct rq *rq, struct task_struct *p, int wakeup) { sched_info_queued(p); @@ -1702,6 +1708,12 @@ static void enqueue_task(struct rq *rq, struct task_struct *p, int wakeup) static void dequeue_task(struct rq *rq, struct task_struct *p, int sleep) { + if (sleep && p->se.last_wakeup) { + update_avg(&p->se.avg_overlap, + p->se.sum_exec_runtime - p->se.last_wakeup); + p->se.last_wakeup = 0; + } + p->sched_class->dequeue_task(rq, p, sleep); p->se.on_rq = 0; } @@ -2313,6 +2325,8 @@ out_running: p->sched_class->task_wake_up(rq, p); #endif out: + current->se.last_wakeup = current->se.sum_exec_runtime; + task_rq_unlock(rq, &flags); return success; diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 2e43d4a748c3..f2aa987027d6 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -726,21 +726,6 @@ enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int wakeup) __enqueue_entity(cfs_rq, se); } -static void update_avg(u64 *avg, u64 sample) -{ - s64 diff = sample - *avg; - *avg += diff >> 3; -} - -static void update_avg_stats(struct cfs_rq *cfs_rq, struct sched_entity *se) -{ - if (!se->last_wakeup) - return; - - update_avg(&se->avg_overlap, se->sum_exec_runtime - se->last_wakeup); - se->last_wakeup = 0; -} - static void dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep) { @@ -751,7 +736,6 @@ dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int sleep) update_stats_dequeue(cfs_rq, se); if (sleep) { - update_avg_stats(cfs_rq, se); #ifdef CONFIG_SCHEDSTATS if (entity_is_task(se)) { struct task_struct *tsk = task_of(se); @@ -1196,9 +1180,9 @@ wake_affine(struct rq *rq, struct sched_domain *this_sd, struct rq *this_rq, * a reasonable amount of time then attract this newly * woken task: */ - if (sync && balanced && curr->sched_class == &fair_sched_class) { + if (sync && balanced) { if (curr->se.avg_overlap < sysctl_sched_migration_cost && - p->se.avg_overlap < sysctl_sched_migration_cost) + p->se.avg_overlap < sysctl_sched_migration_cost) return 1; } @@ -1359,7 +1343,6 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p) return; } - se->last_wakeup = se->sum_exec_runtime; if (unlikely(se == pse)) return; -- cgit v1.2.3 From 46ac22bab42cc868b9c1d0e915ddbc8e8065a44d Mon Sep 17 00:00:00 2001 From: Ankita Garg Date: Tue, 1 Jul 2008 14:30:06 +0530 Subject: sched: fix accounting in task delay accounting & migration On Thu, Jun 19, 2008 at 12:27:14PM +0200, Peter Zijlstra wrote: > On Thu, 2008-06-05 at 10:50 +0530, Ankita Garg wrote: > > > Thanks Peter for the explanation... > > > > I agree with the above and that is the reason why I did not see weird > > values with cpu_time. But, run_delay still would suffer skews as the end > > points for delta could be taken on different cpus due to migration (more > > so on RT kernel due to the push-pull operations). With the below patch, > > I could not reproduce the issue I had seen earlier. After every dequeue, > > we take the delta and start wait measurements from zero when moved to a > > different rq. > > OK, so task delay delay accounting is broken because it doesn't take > migration into account. > > What you've done is make it symmetric wrt enqueue, and account it like > > cpu0 cpu1 > > enqueue > > dequeue > enqueue > > run > > Where you add both d1 and d2 to the run_delay,.. right? > Thanks for reviewing the patch. The above is exactly what I have done. > This seems like a good fix, however it looks like the patch will break > compilation in !CONFIG_SCHEDSTATS && !CONFIG_TASK_DELAY_ACCT, of it > failing to provide a stub for sched_info_dequeue() in that case. Fixed. Pl. find the new patch below. Signed-off-by: Ankita Garg Acked-by: Peter Zijlstra Cc: Gregory Haskins Cc: rostedt@goodmis.org Cc: suresh.b.siddha@intel.com Cc: aneesh.kumar@linux.vnet.ibm.com Cc: dhaval@linux.vnet.ibm.com Cc: vatsa@linux.vnet.ibm.com Cc: David Bahi Signed-off-by: Ingo Molnar --- kernel/sched.c | 1 + kernel/sched_stats.h | 42 +++++++++++++++++++++++++++++++++--------- 2 files changed, 34 insertions(+), 9 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index bbc40c3a0657..996bc15196a5 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1714,6 +1714,7 @@ static void dequeue_task(struct rq *rq, struct task_struct *p, int sleep) p->se.last_wakeup = 0; } + sched_info_dequeued(p); p->sched_class->dequeue_task(rq, p, sleep); p->se.on_rq = 0; } diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index 80179ef7450e..8385d43987e2 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -118,6 +118,13 @@ rq_sched_info_depart(struct rq *rq, unsigned long long delta) if (rq) rq->rq_sched_info.cpu_time += delta; } + +static inline void +rq_sched_info_dequeued(struct rq *rq, unsigned long long delta) +{ + if (rq) + rq->rq_sched_info.run_delay += delta; +} # define schedstat_inc(rq, field) do { (rq)->field++; } while (0) # define schedstat_add(rq, field, amt) do { (rq)->field += (amt); } while (0) # define schedstat_set(var, val) do { var = (val); } while (0) @@ -126,6 +133,9 @@ static inline void rq_sched_info_arrive(struct rq *rq, unsigned long long delta) {} static inline void +rq_sched_info_dequeued(struct rq *rq, unsigned long long delta) +{} +static inline void rq_sched_info_depart(struct rq *rq, unsigned long long delta) {} # define schedstat_inc(rq, field) do { } while (0) @@ -134,6 +144,11 @@ rq_sched_info_depart(struct rq *rq, unsigned long long delta) #endif #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT) +static inline void sched_info_reset_dequeued(struct task_struct *t) +{ + t->sched_info.last_queued = 0; +} + /* * Called when a process is dequeued from the active array and given * the cpu. We should note that with the exception of interactive @@ -143,15 +158,22 @@ rq_sched_info_depart(struct rq *rq, unsigned long long delta) * active queue, thus delaying tasks in the expired queue from running; * see scheduler_tick()). * - * This function is only called from sched_info_arrive(), rather than - * dequeue_task(). Even though a task may be queued and dequeued multiple - * times as it is shuffled about, we're really interested in knowing how - * long it was from the *first* time it was queued to the time that it - * finally hit a cpu. + * Though we are interested in knowing how long it was from the *first* time a + * task was queued to the time that it finally hit a cpu, we call this routine + * from dequeue_task() to account for possible rq->clock skew across cpus. The + * delta taken on each cpu would annul the skew. */ static inline void sched_info_dequeued(struct task_struct *t) { - t->sched_info.last_queued = 0; + unsigned long long now = task_rq(t)->clock, delta = 0; + + if (unlikely(sched_info_on())) + if (t->sched_info.last_queued) + delta = now - t->sched_info.last_queued; + sched_info_reset_dequeued(t); + t->sched_info.run_delay += delta; + + rq_sched_info_dequeued(task_rq(t), delta); } /* @@ -165,7 +187,7 @@ static void sched_info_arrive(struct task_struct *t) if (t->sched_info.last_queued) delta = now - t->sched_info.last_queued; - sched_info_dequeued(t); + sched_info_reset_dequeued(t); t->sched_info.run_delay += delta; t->sched_info.last_arrival = now; t->sched_info.pcount++; @@ -242,7 +264,9 @@ sched_info_switch(struct task_struct *prev, struct task_struct *next) __sched_info_switch(prev, next); } #else -#define sched_info_queued(t) do { } while (0) -#define sched_info_switch(t, next) do { } while (0) +#define sched_info_queued(t) do { } while (0) +#define sched_info_reset_dequeued(t) do { } while (0) +#define sched_info_dequeued(t) do { } while (0) +#define sched_info_switch(t, next) do { } while (0) #endif /* CONFIG_SCHEDSTATS || CONFIG_TASK_DELAY_ACCT */ -- cgit v1.2.3 From 54364b752ef0c91fe92684df000cc4593d1e8963 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Sun, 29 Jun 2008 21:48:11 +0200 Subject: Add missing skb->dev assignment in Frame Relay RX code Commit 4c13eb6657fe9ef7b4dc8f1a405c902e9e5234e0 ([ETH]: Make eth_type_trans set skb->dev like the other *_type_trans) removed skb->dev assignment from hdlc_fr.c:fr_rx(). Unfortunately it was also needed for cases other than eth_type_trans(). Adding it back. It's quite serious and may be a security risk as it causes a wrong input interface indication (the physical hdlcX instead of logical pvcX). Probably -stable class fix. Signed-off-by: Krzysztof Halasa Signed-off-by: Jeff Garzik --- drivers/net/wan/hdlc_fr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index 520bb0b1a9a2..6d35155c7145 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -1008,6 +1008,7 @@ static int fr_rx(struct sk_buff *skb) stats->rx_bytes += skb->len; if (pvc->state.becn) stats->rx_compressed++; + skb->dev = dev; netif_rx(skb); return NET_RX_SUCCESS; } else { -- cgit v1.2.3 From 97bff0953dd45a633fa69e1a650d612f5610a60b Mon Sep 17 00:00:00 2001 From: Tobias Diedrich Date: Thu, 3 Jul 2008 23:54:56 -0700 Subject: forcedeth: fix lockdep warning on ethtool -s After enabling CONFIG_LOCKDEP and CONFIG_PROVE_LOCKING I get the following warning when ethtool -s is first called on one of the forcedeth ports: ================================= [ INFO: inconsistent lock state ] 2.6.26-rc4 #28 --------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. ethtool/1985 [HC0[0]:SC0[1]:HE1:SE0] takes: (&np->lock){++..}, at: [] nv_set_settings+0xc8/0x3de [forcedeth] {in-hardirq-W} state was registered at: [] 0xffffffffffffffff irq event stamp: 3606 hardirqs last enabled at (3605): [] _spin_unlock_irqrestore+0x3f/0x68 hardirqs last disabled at (3604): [] _spin_lock_irqsave+0x13/0x46 softirqs last enabled at (3534): [] __do_softirq+0xbc/0xc5 softirqs last disabled at (3606): [] _spin_lock_bh+0x11/0x41 other info that might help us debug this: 2 locks held by ethtool/1985: #0: (rtnl_mutex){--..}, at: [] rtnl_lock+0x12/0x14 #1: (_xmit_ETHER){-+..}, at: [] nv_set_settings+0xb3/0x3de [forcedeth] stack backtrace: Pid: 1985, comm: ethtool Not tainted 2.6.26-rc4 #28 Call Trace: [] print_usage_bug+0x162/0x173 [] mark_lock+0x231/0x41f [] __lock_acquire+0x4e7/0xcac [] ? trace_hardirqs_on+0xf1/0x115 [] ? disable_irq_nosync+0x6f/0x7b [] lock_acquire+0x55/0x6e [] ? :forcedeth:nv_set_settings+0xc8/0x3de [] _spin_lock+0x2f/0x3c [] :forcedeth:nv_set_settings+0xc8/0x3de [] dev_ethtool+0x186/0xea3 [] ? mutex_lock_nested+0x243/0x275 [] ? debug_mutex_free_waiter+0x46/0x4a [] ? mutex_lock_nested+0x266/0x275 [] dev_ioctl+0x4eb/0x600 [] ? _spin_unlock_irqrestore+0x3f/0x68 [] sock_ioctl+0x1f5/0x202 [] vfs_ioctl+0x2a/0x77 [] do_vfs_ioctl+0x25b/0x270 [] ? trace_hardirqs_on_thunk+0x35/0x3a [] sys_ioctl+0x42/0x65 [] system_call_after_swapgs+0x7b/0x80 This is caused by the following snippet in nv_set_settings: netif_carrier_off(dev); if (netif_running(dev)) { nv_disable_irq(dev); netif_tx_lock_bh(dev); spin_lock(&np->lock); /* stop engines */ nv_stop_rxtx(dev); spin_unlock(&np->lock); netif_tx_unlock_bh(dev); } Because of nv_disable_irq this is probably not really a problem though (I guess) and replacing the spin_lock with spin_lock_irqsave could keep interrupts disabled for a longer period of time because of delays in nv_stop_rx and nv_stop_tx. Signed-off-by: Tobias Diedrich Cc: Ayaz Abdulla Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/forcedeth.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 2cb244763292..20d4fe96a81c 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -4194,12 +4194,23 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) netif_carrier_off(dev); if (netif_running(dev)) { + unsigned long flags; + nv_disable_irq(dev); netif_tx_lock_bh(dev); - spin_lock(&np->lock); + /* with plain spinlock lockdep complains */ + spin_lock_irqsave(&np->lock, flags); /* stop engines */ + /* FIXME: + * this can take some time, and interrupts are disabled + * due to spin_lock_irqsave, but let's hope no daemon + * is going to change the settings very often... + * Worst case: + * NV_RXSTOP_DELAY1MAX + NV_TXSTOP_DELAY1MAX + * + some minor delays, which is up to a second approximately + */ nv_stop_rxtx(dev); - spin_unlock(&np->lock); + spin_unlock_irqrestore(&np->lock, flags); netif_tx_unlock_bh(dev); } -- cgit v1.2.3 From 5c2cec143ac54c1960e54bc320fa7d13ac8e0f4a Mon Sep 17 00:00:00 2001 From: Jan-Bernd Themann Date: Thu, 3 Jul 2008 15:18:45 +0100 Subject: ehea: fix might sleep problem A mutex has to be replaced by spinlocks as it can be called from a context which does not allow sleeping. The kzalloc flag GFP_KERNEL has to be replaced by GFP_ATOMIC for the same reason. Signed-off-by: Jan-Bernd Themann Signed-off-by: Jeff Garzik --- drivers/net/ehea/ehea.h | 2 +- drivers/net/ehea/ehea_main.c | 22 +++++++++++----------- 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index fe872fbd671e..bf57e1532f5e 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -452,7 +452,7 @@ struct ehea_bcmc_reg_entry { struct ehea_bcmc_reg_array { struct ehea_bcmc_reg_entry *arr; int num_entries; - struct mutex lock; + spinlock_t lock; }; #define EHEA_PORT_UP 1 diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 075fd547421e..489de9ba5fc0 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -241,7 +241,7 @@ static void ehea_update_bcmc_registrations(void) } if (num_registrations) { - arr = kzalloc(num_registrations * sizeof(*arr), GFP_KERNEL); + arr = kzalloc(num_registrations * sizeof(*arr), GFP_ATOMIC); if (!arr) return; /* Keep the existing array */ } else @@ -301,7 +301,7 @@ static struct net_device_stats *ehea_get_stats(struct net_device *dev) memset(stats, 0, sizeof(*stats)); - cb2 = kzalloc(PAGE_SIZE, GFP_KERNEL); + cb2 = kzalloc(PAGE_SIZE, GFP_ATOMIC); if (!cb2) { ehea_error("no mem for cb2"); goto out; @@ -1763,7 +1763,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa) memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len); - mutex_lock(&ehea_bcmc_regs.lock); + spin_lock(&ehea_bcmc_regs.lock); /* Deregister old MAC in pHYP */ if (port->state == EHEA_PORT_UP) { @@ -1785,7 +1785,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa) out_upregs: ehea_update_bcmc_registrations(); - mutex_unlock(&ehea_bcmc_regs.lock); + spin_unlock(&ehea_bcmc_regs.lock); out_free: kfree(cb0); out: @@ -1947,7 +1947,7 @@ static void ehea_set_multicast_list(struct net_device *dev) } ehea_promiscuous(dev, 0); - mutex_lock(&ehea_bcmc_regs.lock); + spin_lock(&ehea_bcmc_regs.lock); if (dev->flags & IFF_ALLMULTI) { ehea_allmulti(dev, 1); @@ -1978,7 +1978,7 @@ static void ehea_set_multicast_list(struct net_device *dev) } out: ehea_update_bcmc_registrations(); - mutex_unlock(&ehea_bcmc_regs.lock); + spin_unlock(&ehea_bcmc_regs.lock); return; } @@ -2497,7 +2497,7 @@ static int ehea_up(struct net_device *dev) } } - mutex_lock(&ehea_bcmc_regs.lock); + spin_lock(&ehea_bcmc_regs.lock); ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); if (ret) { @@ -2520,7 +2520,7 @@ out: ehea_info("Failed starting %s. ret=%i", dev->name, ret); ehea_update_bcmc_registrations(); - mutex_unlock(&ehea_bcmc_regs.lock); + spin_unlock(&ehea_bcmc_regs.lock); ehea_update_firmware_handles(); mutex_unlock(&ehea_fw_handles.lock); @@ -2575,7 +2575,7 @@ static int ehea_down(struct net_device *dev) mutex_lock(&ehea_fw_handles.lock); - mutex_lock(&ehea_bcmc_regs.lock); + spin_lock(&ehea_bcmc_regs.lock); ehea_drop_multicast_list(dev); ehea_broadcast_reg_helper(port, H_DEREG_BCMC); @@ -2584,7 +2584,7 @@ static int ehea_down(struct net_device *dev) port->state = EHEA_PORT_DOWN; ehea_update_bcmc_registrations(); - mutex_unlock(&ehea_bcmc_regs.lock); + spin_unlock(&ehea_bcmc_regs.lock); ret = ehea_clean_all_portres(port); if (ret) @@ -3590,7 +3590,7 @@ int __init ehea_module_init(void) memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs)); mutex_init(&ehea_fw_handles.lock); - mutex_init(&ehea_bcmc_regs.lock); + spin_lock_init(&ehea_bcmc_regs.lock); ret = check_module_parm(); if (ret) -- cgit v1.2.3 From b0afffe89be619f42ae4215554ed66e67de7bb0e Mon Sep 17 00:00:00 2001 From: Jan-Bernd Themann Date: Thu, 3 Jul 2008 15:18:48 +0100 Subject: ehea: add MODULE_DEVICE_TABLE Required to allow distros to easily detect when ehea module needs to be loaded Signed-off-by: Jan-Bernd Themann Signed-off-by: Jeff Garzik --- drivers/net/ehea/ehea_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 489de9ba5fc0..6ebcb221cd5e 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -118,6 +118,7 @@ static struct of_device_id ehea_device_table[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, ehea_device_table); static struct of_platform_driver ehea_driver = { .name = "ehea", -- cgit v1.2.3 From 2f69ae01c83a94af5dc3c20e8135b974687ed004 Mon Sep 17 00:00:00 2001 From: Jan-Bernd Themann Date: Thu, 3 Jul 2008 15:18:51 +0100 Subject: ehea: fix race condition When ehea_stop is called the function cancel_work_sync(&port->reset_task) is used to ensure that the reset task is not running anymore. We need an additional flag to ensure that it can not be scheduled after this call again for a certain time. Signed-off-by: Jan-Bernd Themann Signed-off-by: Jeff Garzik --- drivers/net/ehea/ehea.h | 6 ++++-- drivers/net/ehea/ehea_main.c | 17 ++++++++++++----- 2 files changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index bf57e1532f5e..e01926b7b5b7 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -40,7 +40,7 @@ #include #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0091" +#define DRV_VERSION "EHEA_0092" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 @@ -478,6 +478,7 @@ struct ehea_port { int num_add_tx_qps; int num_mcs; int resets; + u64 flags; u64 mac_addr; u32 logical_port_id; u32 port_speed; @@ -501,7 +502,8 @@ struct port_res_cfg { }; enum ehea_flag_bits { - __EHEA_STOP_XFER + __EHEA_STOP_XFER, + __EHEA_DISABLE_PORT_RESET }; void ehea_set_ethtool_ops(struct net_device *netdev); diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 6ebcb221cd5e..49ba6a9a7b06 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -138,6 +138,12 @@ void ehea_dump(void *adr, int len, char *msg) } } +void ehea_schedule_port_reset(struct ehea_port *port) +{ + if (!test_bit(__EHEA_DISABLE_PORT_RESET, &port->flags)) + schedule_work(&port->reset_task); +} + static void ehea_update_firmware_handles(void) { struct ehea_fw_handle_entry *arr = NULL; @@ -588,7 +594,7 @@ static int ehea_treat_poll_error(struct ehea_port_res *pr, int rq, "Resetting port.", pr->qp->init_attr.qp_nr); ehea_dump(cqe, sizeof(*cqe), "CQE"); } - schedule_work(&pr->port->reset_task); + ehea_schedule_port_reset(pr->port); return 1; } @@ -766,7 +772,7 @@ static struct ehea_cqe *ehea_proc_cqes(struct ehea_port_res *pr, int my_quota) ehea_error("Send Completion Error: Resetting port"); if (netif_msg_tx_err(pr->port)) ehea_dump(cqe, sizeof(*cqe), "Send CQE"); - schedule_work(&pr->port->reset_task); + ehea_schedule_port_reset(pr->port); break; } @@ -886,7 +892,7 @@ static irqreturn_t ehea_qp_aff_irq_handler(int irq, void *param) eqe = ehea_poll_eq(port->qp_eq); } - schedule_work(&port->reset_task); + ehea_schedule_port_reset(port); return IRQ_HANDLED; } @@ -2606,13 +2612,14 @@ static int ehea_stop(struct net_device *dev) if (netif_msg_ifdown(port)) ehea_info("disabling port %s", dev->name); + set_bit(__EHEA_DISABLE_PORT_RESET, &port->flags); cancel_work_sync(&port->reset_task); - mutex_lock(&port->port_lock); netif_stop_queue(dev); port_napi_disable(port); ret = ehea_down(dev); mutex_unlock(&port->port_lock); + clear_bit(__EHEA_DISABLE_PORT_RESET, &port->flags); return ret; } @@ -2942,7 +2949,7 @@ static void ehea_tx_watchdog(struct net_device *dev) if (netif_carrier_ok(dev) && !test_bit(__EHEA_STOP_XFER, &ehea_driver_flags)) - schedule_work(&port->reset_task); + ehea_schedule_port_reset(port); } int ehea_sense_adapter_attr(struct ehea_adapter *adapter) -- cgit v1.2.3 From 3ff2cd230de31e3b7bf2efd254e0393e5fc1d15d Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 1 Jul 2008 10:20:33 -0700 Subject: ehea: Access iph->tot_len with correct endianness iph->tot_len is stored in network byte order, so access it using ntohs(). This doesn't have any real world impact on ehea, since ehea only exists for big-endian platfroms (at the moment at least) but fixing this gets rid of a sparse warning and avoids having a bad example in the tree. Signed-off-by: Roland Dreier Signed-off-by: Jeff Garzik --- drivers/net/ehea/ehea_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 49ba6a9a7b06..0920b796bd78 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -623,7 +623,7 @@ static int get_skb_hdr(struct sk_buff *skb, void **iphdr, *tcph = tcp_hdr(skb); /* check if ip header and tcp header are complete */ - if (iph->tot_len < ip_len + tcp_hdrlen(skb)) + if (ntohs(iph->tot_len) < ip_len + tcp_hdrlen(skb)) return -1; *hdr_flags = LRO_IPV4 | LRO_TCP; -- cgit v1.2.3 From 773212337941c5e26a05989532943877d72a2c83 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 1 Jul 2008 10:22:45 -0700 Subject: pasemi_mac: Access iph->tot_len with correct endianness iph->tot_len is stored in network byte order, so access it using ntohs(). This doesn't have any real world impact on pasemi_mac, since the device only exists as part of a big-endian system-on-chip, but fixing this gets rid of a sparse warning and avoids having a bad example in the tree. Signed-off-by: Roland Dreier Signed-off-by: Jeff Garzik --- drivers/net/pasemi_mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c index 3b2a6c598088..993d87c9296f 100644 --- a/drivers/net/pasemi_mac.c +++ b/drivers/net/pasemi_mac.c @@ -277,7 +277,7 @@ static int get_skb_hdr(struct sk_buff *skb, void **iphdr, *tcph = tcp_hdr(skb); /* check if ip header and tcp header are complete */ - if (iph->tot_len < ip_len + tcp_hdrlen(skb)) + if (ntohs(iph->tot_len) < ip_len + tcp_hdrlen(skb)) return -1; *hdr_flags = LRO_IPV4 | LRO_TCP; -- cgit v1.2.3 From ab9b30cc3ec868fab8764d710193107fbeedbd0f Mon Sep 17 00:00:00 2001 From: Sathya Narayanan Date: Tue, 1 Jul 2008 10:58:05 +0200 Subject: ibm_newemac: Fixes kernel crashes when speed of cable connected changes The descriptor pointers were not initialized to NIL values, so it was poiniting to some random addresses which was completely invalid. This fix takes care of initializing the descriptor to NIL values and clearing the valid descriptors on clean ring operation. Signed-off-by: Sathya Narayanan Signed-off-by: Stefan Roese Signed-off-by: Jeff Garzik --- drivers/net/ibm_newemac/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 5d2108c5ac7c..ca63fa000ee7 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -2719,6 +2719,8 @@ static int __devinit emac_probe(struct of_device *ofdev, /* Clean rings */ memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor)); memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor)); + memset(dev->tx_skb, 0, NUM_TX_BUFF * sizeof(struct sk_buff *)); + memset(dev->rx_skb, 0, NUM_RX_BUFF * sizeof(struct sk_buff *)); /* Attach to ZMII, if needed */ if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII) && -- cgit v1.2.3 From 6c688f4294dec3f2228fd46be67604508177a1c3 Mon Sep 17 00:00:00 2001 From: Sathya Narayanan Date: Tue, 1 Jul 2008 10:58:19 +0200 Subject: ibm_newemac: Fixes entry of short packets Short packets has to be discarded by the driver. So this patch addresses the issue of discarding the short packets of size lesser then ethernet header size. Signed-off-by: Sathya Narayanan Signed-off-by: Stefan Roese Signed-off-by: Jeff Garzik --- drivers/net/ibm_newemac/core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index ca63fa000ee7..babc79ad490b 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -1636,6 +1636,12 @@ static int emac_poll_rx(void *param, int budget) goto next; } + if (len < ETH_HLEN) { + ++dev->estats.rx_dropped_stack; + emac_recycle_rx_skb(dev, slot, len); + goto next; + } + if (len && len < EMAC_RX_COPY_THRESH) { struct sk_buff *copy_skb = alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC); -- cgit v1.2.3 From c5a78ac00c400df29645e59938700301efb371d0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 26 Jun 2008 11:48:22 +0200 Subject: fs_enet: restore promiscuous and multicast settings in restart() The restart() function is called when the link state changes and resets multicast and promiscuous settings. This patch restores those settings at the end of restart(). Signed-off-by: Laurent Pinchart Signed-off-by: Jeff Garzik --- drivers/net/fs_enet/mac-fcc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c index e36321152d50..8268b3535b30 100644 --- a/drivers/net/fs_enet/mac-fcc.c +++ b/drivers/net/fs_enet/mac-fcc.c @@ -463,6 +463,9 @@ static void restart(struct net_device *dev) else C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB); + /* Restore multicast and promiscuous settings */ + set_multicast_list(dev); + S32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT); } -- cgit v1.2.3 From 464b3286b4aa459059c6fda85ba55185fd21d9fc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 2 Jul 2008 17:50:23 +0900 Subject: sata_sil24: add DID for another adaptec flavor There's another DID used for Adaptec card. Add it. Reported by Travis Read. Signed-off-by: Tejun Heo Cc: Travis Read Signed-off-by: Jeff Garzik --- drivers/ata/sata_sil24.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 8ee6b5b4ede7..84ffcc26a74b 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -370,6 +370,7 @@ static const struct pci_device_id sil24_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 }, { PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 }, { PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 }, + { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 }, { PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 }, { PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 }, -- cgit v1.2.3 From ea0c62f7cf70f13a67830471b613337bd0c9a62e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 28 Jun 2008 01:49:02 +0900 Subject: ahci: always clear all bits in irq_stat Some AHCI controllers (ICH7 was reported) set pending bit in HOST_IRQ_STAT for non-existent ports and when it's not cleared falls into IRQ storm. Always clear full irq_stat instead of only the bits that are handled. As nothing changes for recognized ports, the risk of breaking things is pretty low. Reported and verified by Philipp Thomas in the following suse bugzilla. https://bugzilla.novell.com/attachment.cgi?id=215692 Signed-off-by: Tejun Heo Cc: Philipp Thomas Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 6a4a2a25d97a..061817a3a0e5 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1777,7 +1777,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) struct ahci_host_priv *hpriv; unsigned int i, handled = 0; void __iomem *mmio; - u32 irq_stat, irq_ack = 0; + u32 irq_stat; VPRINTK("ENTER\n"); @@ -1809,14 +1809,11 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) "interrupt on disabled port %u\n", i); } - irq_ack |= (1 << i); - } - - if (irq_ack) { - writel(irq_ack, mmio + HOST_IRQ_STAT); handled = 1; } + writel(irq_stat, mmio + HOST_IRQ_STAT); + spin_unlock(&host->lock); VPRINTK("EXIT\n"); -- cgit v1.2.3 From a836d3e882161c562b3ddacee5d8842a033c5b2c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 28 Jun 2008 01:39:43 +0900 Subject: libata-sff: improve HSM violation reporting Improve SFF HSM violation reporting such that each HSM violation can be distinguished using ehi_desc. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-sff.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 215d18672a5a..c0908c225483 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1094,6 +1094,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, u8 status, int in_wq) { + struct ata_eh_info *ehi = &ap->link.eh_info; unsigned long flags = 0; int poll_next; @@ -1125,9 +1126,12 @@ fsm_start: if (likely(status & (ATA_ERR | ATA_DF))) /* device stops HSM for abort/error */ qc->err_mask |= AC_ERR_DEV; - else + else { /* HSM violation. Let EH handle this */ + ata_ehi_push_desc(ehi, + "ST_FIRST: !(DRQ|ERR|DF)"); qc->err_mask |= AC_ERR_HSM; + } ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -1146,9 +1150,9 @@ fsm_start: * the CDB. */ if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) { - ata_port_printk(ap, KERN_WARNING, - "DRQ=1 with device error, " - "dev_stat 0x%X\n", status); + ata_ehi_push_desc(ehi, "ST_FIRST: " + "DRQ=1 with device error, " + "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -1205,9 +1209,9 @@ fsm_start: * let the EH abort the command or reset the device. */ if (unlikely(status & (ATA_ERR | ATA_DF))) { - ata_port_printk(ap, KERN_WARNING, "DRQ=1 with " - "device error, dev_stat 0x%X\n", - status); + ata_ehi_push_desc(ehi, "ST-ATAPI: " + "DRQ=1 with device error, " + "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -1226,13 +1230,17 @@ fsm_start: if (likely(status & (ATA_ERR | ATA_DF))) /* device stops HSM for abort/error */ qc->err_mask |= AC_ERR_DEV; - else + else { /* HSM violation. Let EH handle this. * Phantom devices also trigger this * condition. Mark hint. */ + ata_ehi_push_desc(ehi, "ST-ATA: " + "DRQ=1 with device error, " + "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM | AC_ERR_NODEV_HINT; + } ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -1257,8 +1265,12 @@ fsm_start: status = ata_wait_idle(ap); } - if (status & (ATA_BUSY | ATA_DRQ)) + if (status & (ATA_BUSY | ATA_DRQ)) { + ata_ehi_push_desc(ehi, "ST-ATA: " + "BUSY|DRQ persists on ERR|DF, " + "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM; + } /* ata_pio_sectors() might change the * state to HSM_ST_LAST. so, the state -- cgit v1.2.3 From c7843e8f565f624b0cff7cad1370fad4cb84dfbc Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 18 Jun 2008 21:57:42 -0400 Subject: sata_mv: safer logic for limit_warnings There is a miniscule chance that two separate host controllers might be in sata_mv at the same time and manage to decrement the static limit_warnings variable below zero. Fix the comparison to deal with it. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 28092bc50146..ad169ffbc4cb 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1607,7 +1607,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) * Much of the time, this could just work regardless. * So for now, just log the incident, and allow the attempt. */ - if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) { + if (limit_warnings > 0 && (qc->nbytes / qc->sect_size) > 1) { --limit_warnings; ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME ": attempting PIO w/multiple DRQ: " -- cgit v1.2.3 From 84e65b0a84a2c856bef36f13d122047678408b0a Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Fri, 4 Jul 2008 13:56:16 +0100 Subject: x86: cacheline_align tss_struct The manual padding to align on cacheline size only worked in 32 bit In 64 bit the structure was not aligned and contained wasted space. use the compiler ____cachline_aligned to save space & properly align this structure. x86_64_default size goes from 9136 -> 8960 x86_64_AMD size goes from 9136 -> 8896 built & running on 2.6.26-rc8. Signed-off-by: Richard Kennedy Signed-off-by: Ingo Molnar --- include/asm-x86/processor.h | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index 559105220a47..4ab2ede6f4b9 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -262,16 +262,12 @@ struct tss_struct { unsigned long io_bitmap_max; struct thread_struct *io_bitmap_owner; - /* - * Pad the TSS to be cacheline-aligned (size is 0x100): - */ - unsigned long __cacheline_filler[35]; /* * .. and then another 0x100 bytes for the emergency kernel stack: */ unsigned long stack[64]; -} __attribute__((packed)); +} ____cacheline_aligned; DECLARE_PER_CPU(struct tss_struct, init_tss); -- cgit v1.2.3 From 5b2d281acb04a29fcdc76ced5ca6099565a0747f Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 27 Jun 2008 14:43:20 -0700 Subject: IB/uverbs: BKL is not needed for ib_uverbs_open() Remove explicit lock_kernel() calls and document why the code is safe. Signed-off-by: Roland Dreier Signed-off-by: Jonathan Corbet --- drivers/infiniband/core/uverbs_main.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 8ede1e475ce6..fdfcf7910d9a 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -45,7 +45,6 @@ #include #include #include -#include #include @@ -611,23 +610,32 @@ static int ib_uverbs_mmap(struct file *filp, struct vm_area_struct *vma) return file->device->ib_dev->mmap(file->ucontext, vma); } +/* + * ib_uverbs_open() does not need the BKL: + * + * - dev_table[] accesses are protected by map_lock, the + * ib_uverbs_device structures are properly reference counted, and + * everything else is purely local to the file being created, so + * races against other open calls are not a problem; + * - there is no ioctl method to race against; + * - the device is added to dev_table[] as the last part of module + * initialization, the open method will either immediately run + * -ENXIO, or all required initialization will be done. + */ static int ib_uverbs_open(struct inode *inode, struct file *filp) { struct ib_uverbs_device *dev; struct ib_uverbs_file *file; int ret; - lock_kernel(); spin_lock(&map_lock); dev = dev_table[iminor(inode) - IB_UVERBS_BASE_MINOR]; if (dev) kref_get(&dev->ref); spin_unlock(&map_lock); - if (!dev) { - unlock_kernel(); + if (!dev) return -ENXIO; - } if (!try_module_get(dev->ib_dev->owner)) { ret = -ENODEV; @@ -648,7 +656,6 @@ static int ib_uverbs_open(struct inode *inode, struct file *filp) filp->private_data = file; - unlock_kernel(); return 0; err_module: @@ -656,7 +663,6 @@ err_module: err: kref_put(&dev->ref, ib_uverbs_release_dev); - unlock_kernel(); return ret; } -- cgit v1.2.3 From 852bb9f594e0ea737f83487962a040ad210e8a13 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 4 Jul 2008 21:04:42 +1000 Subject: Update maintainers for powerpc This updates the MAINTAINERS entries for powerpc. It adds Ben H to the overall Linux for PowerPC entry and makes it clear this covers both 32-bit and 64-bit machines. It removes the separate entry we had for Linux on 64-bit PowerPC where Anton and I were listed as maintainers - Anton hasn't been involved in the day-to-day maintenance of the code for several years. Finally, it removes the entry for the Linux for PowerPC boot code where Tom Rini was listed as the maintainer. That code got completely rewritten when we merged 32-bit and 64-bit, and I and the various platform maintainers have been maintaining that code since. Signed-off-by: Paul Mackerras Acked-by: Tom Rini Signed-off-by: Linus Torvalds --- MAINTAINERS | 22 +++------------------- 1 file changed, 3 insertions(+), 19 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index e6c06fa3290e..460e699fd280 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2474,9 +2474,11 @@ M: James.Bottomley@HansenPartnership.com W: http://www.hansenpartnership.com/voyager S: Maintained -LINUX FOR POWERPC +LINUX FOR POWERPC (32-BIT AND 64-BIT) P: Paul Mackerras M: paulus@samba.org +P: Benjamin Herrenschmidt +M: benh@kernel.crashing.org W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org T: git kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc.git @@ -2516,13 +2518,6 @@ W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex L: linuxppc-dev@ozlabs.org S: Maintained -LINUX FOR POWERPC BOOT CODE -P: Tom Rini -M: trini@kernel.crashing.org -W: http://www.penguinppc.org/ -L: linuxppc-dev@ozlabs.org -S: Maintained - LINUX FOR POWERPC EMBEDDED PPC8XX P: Vitaly Bordug M: vitb@kernel.crashing.org @@ -2551,17 +2546,6 @@ P: Arnaldo Carvalho de Melo M: acme@ghostprotocols.net S: Maintained -LINUX FOR 64BIT POWERPC -P: Paul Mackerras -M: paulus@samba.org -M: paulus@au.ibm.com -P: Anton Blanchard -M: anton@samba.org -M: anton@au.ibm.com -W: http://www.penguinppc.org/ppc64/ -L: linuxppc-dev@ozlabs.org -S: Supported - LINUX SECURITY MODULE (LSM) FRAMEWORK P: Chris Wright M: chrisw@sous-sol.org -- cgit v1.2.3 From cde53535991fbb5c34a1566f25955297c1487b8d Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Fri, 4 Jul 2008 09:59:22 -0700 Subject: Christoph has moved Remove all clameter@sgi.com addresses from the kernel tree since they will become invalid on June 27th. Change my maintainer email address for the slab allocators to cl@linux-foundation.org (which will be the new email address for the future). Signed-off-by: Christoph Lameter Signed-off-by: Christoph Lameter Cc: Pekka Enberg Cc: Stephen Rothwell Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/vm/slabinfo.c | 4 ++-- Documentation/vm/slub.txt | 2 +- MAINTAINERS | 2 +- include/asm-generic/atomic.h | 2 +- include/linux/slab.h | 2 +- include/linux/slub_def.h | 2 +- kernel/workqueue.c | 2 +- lib/radix-tree.c | 2 +- mm/allocpercpu.c | 2 +- mm/migrate.c | 2 +- mm/slub.c | 2 +- mm/sparse-vmemmap.c | 2 +- 12 files changed, 13 insertions(+), 13 deletions(-) diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c index e4230ed16ee7..df3227605d59 100644 --- a/Documentation/vm/slabinfo.c +++ b/Documentation/vm/slabinfo.c @@ -1,7 +1,7 @@ /* * Slabinfo: Tool to get reports about slabs * - * (C) 2007 sgi, Christoph Lameter + * (C) 2007 sgi, Christoph Lameter * * Compile by: * @@ -99,7 +99,7 @@ void fatal(const char *x, ...) void usage(void) { - printf("slabinfo 5/7/2007. (c) 2007 sgi. clameter@sgi.com\n\n" + printf("slabinfo 5/7/2007. (c) 2007 sgi.\n\n" "slabinfo [-ahnpvtsz] [-d debugopts] [slab-regexp]\n" "-a|--aliases Show aliases\n" "-A|--activity Most active slabs first\n" diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt index 7c13f22a0c9e..bb1f5c6e28b3 100644 --- a/Documentation/vm/slub.txt +++ b/Documentation/vm/slub.txt @@ -266,4 +266,4 @@ of other objects. slub_debug=FZ,dentry -Christoph Lameter, , May 30, 2007 +Christoph Lameter, May 30, 2007 diff --git a/MAINTAINERS b/MAINTAINERS index 460e699fd280..13b7b19692e6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3672,7 +3672,7 @@ S: Maintained SLAB ALLOCATOR P: Christoph Lameter -M: clameter@sgi.com +M: cl@linux-foundation.org P: Pekka Enberg M: penberg@cs.helsinki.fi P: Matt Mackall diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h index 85fd0aa27a8c..4ec0a296bdec 100644 --- a/include/asm-generic/atomic.h +++ b/include/asm-generic/atomic.h @@ -2,7 +2,7 @@ #define _ASM_GENERIC_ATOMIC_H /* * Copyright (C) 2005 Silicon Graphics, Inc. - * Christoph Lameter + * Christoph Lameter * * Allows to provide arch independent atomic definitions without the need to * edit all arch specific atomic.h files. diff --git a/include/linux/slab.h b/include/linux/slab.h index c2ad35016599..9aa90a6f20e0 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -1,7 +1,7 @@ /* * Written by Mark Hemment, 1996 (markhe@nextd.demon.co.uk). * - * (C) SGI 2006, Christoph Lameter + * (C) SGI 2006, Christoph Lameter * Cleaned up and restructured to ease the addition of alternative * implementations of SLAB allocators. */ diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index cef6f8fddd7d..d117ea2825a9 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -4,7 +4,7 @@ /* * SLUB : A Slab allocator without object queues. * - * (C) 2007 SGI, Christoph Lameter + * (C) 2007 SGI, Christoph Lameter */ #include #include diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 29fc39f1029c..ce7799540c91 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -13,7 +13,7 @@ * Kai Petzke * Theodore Ts'o * - * Made to use alloc_percpu by Christoph Lameter . + * Made to use alloc_percpu by Christoph Lameter. */ #include diff --git a/lib/radix-tree.c b/lib/radix-tree.c index 169a2f8dabcc..56ec21a7f73d 100644 --- a/lib/radix-tree.c +++ b/lib/radix-tree.c @@ -1,7 +1,7 @@ /* * Copyright (C) 2001 Momchil Velikov * Portions Copyright (C) 2001 Christoph Hellwig - * Copyright (C) 2005 SGI, Christoph Lameter + * Copyright (C) 2005 SGI, Christoph Lameter * Copyright (C) 2006 Nick Piggin * * This program is free software; you can redistribute it and/or diff --git a/mm/allocpercpu.c b/mm/allocpercpu.c index f4026bae6eed..05f2b4009ccc 100644 --- a/mm/allocpercpu.c +++ b/mm/allocpercpu.c @@ -1,7 +1,7 @@ /* * linux/mm/allocpercpu.c * - * Separated from slab.c August 11, 2006 Christoph Lameter + * Separated from slab.c August 11, 2006 Christoph Lameter */ #include #include diff --git a/mm/migrate.c b/mm/migrate.c index 112bcaeaa104..55bd355d170d 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -9,7 +9,7 @@ * IWAMOTO Toshihiro * Hirokazu Takahashi * Dave Hansen - * Christoph Lameter + * Christoph Lameter */ #include diff --git a/mm/slub.c b/mm/slub.c index 2c9a62d1f429..1a427c0ae83b 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -5,7 +5,7 @@ * The allocator synchronizes using per slab locks and only * uses a centralized lock to manage a pool of partial slabs. * - * (C) 2007 SGI, Christoph Lameter + * (C) 2007 SGI, Christoph Lameter */ #include diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c index 99c4f36eb8a3..a91b5f8fcaf6 100644 --- a/mm/sparse-vmemmap.c +++ b/mm/sparse-vmemmap.c @@ -1,7 +1,7 @@ /* * Virtual Memory Map support * - * (C) 2007 sgi. Christoph Lameter . + * (C) 2007 sgi. Christoph Lameter. * * Virtual memory maps allow VM primitives pfn_to_page, page_to_pfn, * virt_to_page, page_address() to be implemented as a base offset -- cgit v1.2.3 From 251b97f552b1ad414cc5a9ccc8e4e94503edd5fc Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 4 Jul 2008 09:59:24 -0700 Subject: mm: dirty page accounting vs VM_MIXEDMAP Dirty page accounting accurately measures the amound of dirty pages in writable shared mappings by mapping the pages RO (as indicated by vma_wants_writenotify). We then trap on first write and call set_page_dirty() on the page, after which we map the page RW and continue execution. When we launder dirty pages, we call clear_page_dirty_for_io() which clears both the dirty flag, and maps the page RO again before we start writeout so that the story can repeat itself. vma_wants_writenotify() excludes VM_PFNMAP on the basis that we cannot do the regular dirty page stuff on raw PFNs and the memory isn't going anywhere anyway. The recently introduced VM_MIXEDMAP mixes both !pfn_valid() and pfn_valid() pages in a single mapping. We can't do dirty page accounting on !pfn_valid() pages as stated above, and mapping them RO causes them to be COW'ed on write, which breaks VM_SHARED semantics. Excluding VM_MIXEDMAP in vma_wants_writenotify() would mean we don't do the regular dirty page accounting for the pfn_valid() pages, which would bring back all the head-aches from inaccurate dirty page accounting. So instead, we let the !pfn_valid() pages get mapped RO, but fix them up unconditionally in the fault path. Signed-off-by: Peter Zijlstra Cc: Nick Piggin Acked-by: Hugh Dickins Cc: "Jared Hulbert" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/mm/memory.c b/mm/memory.c index d14b251a25a6..350e646032f5 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1697,8 +1697,19 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, struct page *dirty_page = NULL; old_page = vm_normal_page(vma, address, orig_pte); - if (!old_page) + if (!old_page) { + /* + * VM_MIXEDMAP !pfn_valid() case + * + * We should not cow pages in a shared writeable mapping. + * Just mark the pages writable as we can't do any dirty + * accounting on raw pfn maps. + */ + if ((vma->vm_flags & (VM_WRITE|VM_SHARED)) == + (VM_WRITE|VM_SHARED)) + goto reuse; goto gotten; + } /* * Take out anonymous pages first, anonymous shared vmas are @@ -1751,6 +1762,7 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, } if (reuse) { +reuse: flush_cache_page(vma, address, pte_pfn(orig_pte)); entry = pte_mkyoung(orig_pte); entry = maybe_mkwrite(pte_mkdirty(entry), vma); -- cgit v1.2.3 From a01cc6570326c01e70619bf6540fb32139947c33 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 4 Jul 2008 09:59:26 -0700 Subject: rtc: rtc_read_alarm() handles wraparound While 0e36a9a4a788e4e92407774df76c545910810d35 ("rtc: fix readback from /sys/class/rtc/rtc?/wakealarm") made sure that active alarms were never returned with invalid "wildcard" fields (negative), it can still report (wrongly) that the alarm triggers in the past. Example, if it's now 10am, an alarm firing at 5am will be triggered TOMORROW not today. (Which may also be next month or next year...) This updates that alarm handling in three ways: * Handle alarm rollover in the common cases of RTCs that don't support matching on all date fields. * Skip the invalid-field logic when it's not needed. * Minor bugfix ... tm_isdst should be ignored, it's one of the fields Linux doesn't maintain. A warning is emitted for some of the unhandled rollover cases, but the possible combinations are a bit too numerous to handle every bit of potential hardware and firmware braindamage. Signed-off-by: David Brownell Cc: Mark Lord Acked-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/interface.c | 102 ++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 91 insertions(+), 11 deletions(-) diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 7e3ad4f3b343..58b7336640ff 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -126,12 +126,25 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) int err; struct rtc_time before, now; int first_time = 1; + unsigned long t_now, t_alm; + enum { none, day, month, year } missing = none; + unsigned days; - /* The lower level RTC driver may not be capable of filling - * in all fields of the rtc_time struct (eg. rtc-cmos), - * and so might instead return -1 in some fields. - * We deal with that here by grabbing a current RTC timestamp - * and using values from that for any missing (-1) values. + /* The lower level RTC driver may return -1 in some fields, + * creating invalid alarm->time values, for reasons like: + * + * - The hardware may not be capable of filling them in; + * many alarms match only on time-of-day fields, not + * day/month/year calendar data. + * + * - Some hardware uses illegal values as "wildcard" match + * values, which non-Linux firmware (like a BIOS) may try + * to set up as e.g. "alarm 15 minutes after each hour". + * Linux uses only oneshot alarms. + * + * When we see that here, we deal with it by using values from + * a current RTC timestamp for any missing (-1) values. The + * RTC driver prevents "periodic alarm" modes. * * But this can be racey, because some fields of the RTC timestamp * may have wrapped in the interval since we read the RTC alarm, @@ -174,6 +187,10 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) if (!alarm->enabled) return 0; + /* full-function RTCs won't have such missing fields */ + if (rtc_valid_tm(&alarm->time) == 0) + return 0; + /* get the "after" timestamp, to detect wrapped fields */ err = rtc_read_time(rtc, &now); if (err < 0) @@ -183,22 +200,85 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) } while ( before.tm_min != now.tm_min || before.tm_hour != now.tm_hour || before.tm_mon != now.tm_mon - || before.tm_year != now.tm_year - || before.tm_isdst != now.tm_isdst); + || before.tm_year != now.tm_year); - /* Fill in any missing alarm fields using the timestamp */ + /* Fill in the missing alarm fields using the timestamp; we + * know there's at least one since alarm->time is invalid. + */ if (alarm->time.tm_sec == -1) alarm->time.tm_sec = now.tm_sec; if (alarm->time.tm_min == -1) alarm->time.tm_min = now.tm_min; if (alarm->time.tm_hour == -1) alarm->time.tm_hour = now.tm_hour; - if (alarm->time.tm_mday == -1) + + /* For simplicity, only support date rollover for now */ + if (alarm->time.tm_mday == -1) { alarm->time.tm_mday = now.tm_mday; - if (alarm->time.tm_mon == -1) + missing = day; + } + if (alarm->time.tm_mon == -1) { alarm->time.tm_mon = now.tm_mon; - if (alarm->time.tm_year == -1) + if (missing == none) + missing = month; + } + if (alarm->time.tm_year == -1) { alarm->time.tm_year = now.tm_year; + if (missing == none) + missing = year; + } + + /* with luck, no rollover is needed */ + rtc_tm_to_time(&now, &t_now); + rtc_tm_to_time(&alarm->time, &t_alm); + if (t_now < t_alm) + goto done; + + switch (missing) { + + /* 24 hour rollover ... if it's now 10am Monday, an alarm that + * that will trigger at 5am will do so at 5am Tuesday, which + * could also be in the next month or year. This is a common + * case, especially for PCs. + */ + case day: + dev_dbg(&rtc->dev, "alarm rollover: %s\n", "day"); + t_alm += 24 * 60 * 60; + rtc_time_to_tm(t_alm, &alarm->time); + break; + + /* Month rollover ... if it's the 31th, an alarm on the 3rd will + * be next month. An alarm matching on the 30th, 29th, or 28th + * may end up in the month after that! Many newer PCs support + * this type of alarm. + */ + case month: + dev_dbg(&rtc->dev, "alarm rollover: %s\n", "month"); + do { + if (alarm->time.tm_mon < 11) + alarm->time.tm_mon++; + else { + alarm->time.tm_mon = 0; + alarm->time.tm_year++; + } + days = rtc_month_days(alarm->time.tm_mon, + alarm->time.tm_year); + } while (days < alarm->time.tm_mday); + break; + + /* Year rollover ... easy except for leap years! */ + case year: + dev_dbg(&rtc->dev, "alarm rollover: %s\n", "year"); + do { + alarm->time.tm_year++; + } while (!rtc_valid_tm(&alarm->time)); + break; + + default: + dev_warn(&rtc->dev, "alarm rollover not handled\n"); + } + +done: return 0; } EXPORT_SYMBOL_GPL(rtc_read_alarm); -- cgit v1.2.3 From 69d44a1835ec8163a82c4ee57367f87ae0f85c2e Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 4 Jul 2008 09:59:27 -0700 Subject: firmware: fix the request_firmware() dummy > the build (.config attached) failed, make ends with : > ... > UPD include/linux/compile.h > CC init/version.o > LD init/built-in.o > LD vmlinux > drivers/built-in.o: In function `sas_request_addr': > (.text+0x33bab): undefined reference to `request_firmware' > drivers/built-in.o: In function `sas_request_addr': > (.text+0x33c3f): undefined reference to `release_firmware' > make: *** [vmlinux] Error 1 There's a slight fault in the stub logic. It fails for FW_LOADER=m and the user =y. This should fix it. This patch fixes the following 2.6.26-rc regression: http://bugzilla.kernel.org/show_bug.cgi?id=10730 Reviewed-by: Toralf Foerster Signed-off-by: Adrian Bunk Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/firmware.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/firmware.h b/include/linux/firmware.h index 4d10c7328d2d..6c7eff2ebada 100644 --- a/include/linux/firmware.h +++ b/include/linux/firmware.h @@ -13,7 +13,7 @@ struct firmware { struct device; -#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE) +#if defined(CONFIG_FW_LOADER) || (defined(CONFIG_FW_LOADER_MODULE) && defined(MODULE)) int request_firmware(const struct firmware **fw, const char *name, struct device *device); int request_firmware_nowait( -- cgit v1.2.3 From 7ca796f492a11f9408e661c8f22cd8c4f486b8e5 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 4 Jul 2008 09:59:28 -0700 Subject: serial: fix serial_match_port() for dynamic major tty-device numbers As reported by Vipul Gandhi, the current serial_match_port() doesn't work for tty-devices using dynamic major number allocation. Fix it. It oopses if you suspend a serial port with _dynamic_ major number. ATM, I think, there's only the drivers/serial/jsm/jsm_driver.c driver, that does it in-tree. Signed-off-by: Guennadi Liakhovetski Tested-by: Vipul Gandhi Cc: Alan Cox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/serial_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index c9b64e73c987..42d2e108b679 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1991,7 +1991,9 @@ struct uart_match { static int serial_match_port(struct device *dev, void *data) { struct uart_match *match = data; - dev_t devt = MKDEV(match->driver->major, match->driver->minor) + match->port->line; + struct tty_driver *tty_drv = match->driver->tty_driver; + dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) + + match->port->line; return dev->devt == devt; /* Actually, only one tty per port */ } -- cgit v1.2.3 From 7a36a752d006f6874049da510297eeb7f09d92a7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 4 Jul 2008 09:59:28 -0700 Subject: get_user_pages(): fix possible page leak on oom get_user_pages() must not return the error when i != 0. When pages != NULL we have i get_page()'ed pages. Signed-off-by: Oleg Nesterov Acked-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/memory.c b/mm/memory.c index 350e646032f5..2302d228fe04 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1151,7 +1151,7 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, * be processed until returning to user space. */ if (unlikely(test_tsk_thread_flag(tsk, TIF_MEMDIE))) - return -ENOMEM; + return i ? i : -ENOMEM; if (write) foll_flags |= FOLL_WRITE; -- cgit v1.2.3 From 471d47e3223311d2638755717f97dc9a298f6dc9 Mon Sep 17 00:00:00 2001 From: Michael Hamel Date: Fri, 4 Jul 2008 09:59:30 -0700 Subject: rtc-x1205: Fix alarm set I have discovered that the current version of rtc-x1205.c does not work correctly when asked to set the alarm time by the RTC_WKALM_SET ioctl() call. This happens because the alarm registers do not behave like the current-time registers. They are non-volatile. Two things go wrong: - the X1205 requires a 10 msec delay after any attempt to write to the non-volatile registers. The x1205_set_datetime() routine does the write as 8 single-byte writes without any delay. Only the first write succeeds. The second is NAKed because the chip is busy. - the X1205 resets the RWEL bit after any write to the non-volatile registers. This would lock out any further writes after the first even with a 10msec delay. I fix this by doing a single 8-byte write and then waiting 10msec for the chip to be ready. A side effect of this change is that it will speed up x1205_rtc_set_time() which uses the same code. I have also implemented the 'enable' bit in the rtc_wkalm structure, which the existing driver does not attempt to do. I have modified both x1205_rtc_set_alarm() to set the AL0E bit, and x1205_rtc_read_alarm() to return it. I have tested this patch on a LinkSys NSLU2 under OpenWRT, but on no other hardware. On the NSLU2 the X1205 correctly asserts its IRQ pin when the alarm time matches the current time. [akpm@linux-foundation.org: clean up over-parenthesisation] Signed-off-by: Michael Hamel Signed-off-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-x1205.c | 111 +++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 91 insertions(+), 20 deletions(-) diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c index eaf55945f21b..7dcfba1bbfe1 100644 --- a/drivers/rtc/rtc-x1205.c +++ b/drivers/rtc/rtc-x1205.c @@ -71,6 +71,7 @@ #define X1205_SR_RTCF 0x01 /* Clock failure */ #define X1205_SR_WEL 0x02 /* Write Enable Latch */ #define X1205_SR_RWEL 0x04 /* Register Write Enable */ +#define X1205_SR_AL0 0x20 /* Alarm 0 match */ #define X1205_DTR_DTR0 0x01 #define X1205_DTR_DTR1 0x02 @@ -78,6 +79,8 @@ #define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ +#define X1205_INT_AL0E 0x20 /* Alarm 0 enable */ + static struct i2c_driver x1205_driver; /* @@ -89,8 +92,8 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, unsigned char reg_base) { unsigned char dt_addr[2] = { 0, reg_base }; - unsigned char buf[8]; + int i; struct i2c_msg msgs[] = { { client->addr, 0, 2, dt_addr }, /* setup read ptr */ @@ -98,7 +101,7 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, }; /* read date registers */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -110,6 +113,11 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); + /* Mask out the enable bits if these are alarm registers */ + if (reg_base < X1205_CCR_BASE) + for (i = 0; i <= 4; i++) + buf[i] &= 0x7F; + tm->tm_sec = BCD2BIN(buf[CCR_SEC]); tm->tm_min = BCD2BIN(buf[CCR_MIN]); tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ @@ -138,7 +146,7 @@ static int x1205_get_status(struct i2c_client *client, unsigned char *sr) }; /* read status register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -147,10 +155,11 @@ static int x1205_get_status(struct i2c_client *client, unsigned char *sr) } static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, - int datetoo, u8 reg_base) + int datetoo, u8 reg_base, unsigned char alm_enable) { - int i, xfer; + int i, xfer, nbytes; unsigned char buf[8]; + unsigned char rdata[10] = { 0, reg_base }; static const unsigned char wel[3] = { 0, X1205_REG_SR, X1205_SR_WEL }; @@ -189,6 +198,11 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100); } + /* If writing alarm registers, set compare bits on registers 0-4 */ + if (reg_base < X1205_CCR_BASE) + for (i = 0; i <= 4; i++) + buf[i] |= 0x80; + /* this sequence is required to unlock the chip */ if ((xfer = i2c_master_send(client, wel, 3)) != 3) { dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer); @@ -200,19 +214,57 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, return -EIO; } + /* write register's data */ - for (i = 0; i < (datetoo ? 8 : 3); i++) { - unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; + if (datetoo) + nbytes = 8; + else + nbytes = 3; + for (i = 0; i < nbytes; i++) + rdata[2+i] = buf[i]; + + xfer = i2c_master_send(client, rdata, nbytes+2); + if (xfer != nbytes+2) { + dev_err(&client->dev, + "%s: result=%d addr=%02x, data=%02x\n", + __func__, + xfer, rdata[1], rdata[2]); + return -EIO; + } + + /* If we wrote to the nonvolatile region, wait 10msec for write cycle*/ + if (reg_base < X1205_CCR_BASE) { + unsigned char al0e[3] = { 0, X1205_REG_INT, 0 }; + + msleep(10); - xfer = i2c_master_send(client, rdata, 3); + /* ...and set or clear the AL0E bit in the INT register */ + + /* Need to set RWEL again as the write has cleared it */ + xfer = i2c_master_send(client, rwel, 3); if (xfer != 3) { dev_err(&client->dev, - "%s: xfer=%d addr=%02x, data=%02x\n", + "%s: aloe rwel - %d\n", __func__, - xfer, rdata[1], rdata[2]); + xfer); + return -EIO; + } + + if (alm_enable) + al0e[2] = X1205_INT_AL0E; + + xfer = i2c_master_send(client, al0e, 3); + if (xfer != 3) { + dev_err(&client->dev, + "%s: al0e - %d\n", + __func__, + xfer); return -EIO; } - }; + + /* and wait 10msec again for this write to complete */ + msleep(10); + } /* disable further writes */ if ((xfer = i2c_master_send(client, diswe, 3)) != 3) { @@ -230,9 +282,9 @@ static int x1205_fix_osc(struct i2c_client *client) tm.tm_hour = tm.tm_min = tm.tm_sec = 0; - if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0) - dev_err(&client->dev, - "unable to restart the oscillator\n"); + err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE, 0); + if (err < 0) + dev_err(&client->dev, "unable to restart the oscillator\n"); return err; } @@ -248,7 +300,7 @@ static int x1205_get_dtrim(struct i2c_client *client, int *trim) }; /* read dtr register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -280,7 +332,7 @@ static int x1205_get_atrim(struct i2c_client *client, int *trim) }; /* read atr register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -403,14 +455,33 @@ static int x1205_validate_client(struct i2c_client *client) static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) { - return x1205_get_datetime(to_i2c_client(dev), - &alrm->time, X1205_ALM0_BASE); + int err; + unsigned char intreg, status; + static unsigned char int_addr[2] = { 0, X1205_REG_INT }; + struct i2c_client *client = to_i2c_client(dev); + struct i2c_msg msgs[] = { + { client->addr, 0, 2, int_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &intreg }, /* read INT register */ + }; + + /* read interrupt register and status register */ + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { + dev_err(&client->dev, "%s: read error\n", __func__); + return -EIO; + } + err = x1205_get_status(client, &status); + if (err == 0) { + alrm->pending = (status & X1205_SR_AL0) ? 1 : 0; + alrm->enabled = (intreg & X1205_INT_AL0E) ? 1 : 0; + err = x1205_get_datetime(client, &alrm->time, X1205_ALM0_BASE); + } + return err; } static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { return x1205_set_datetime(to_i2c_client(dev), - &alrm->time, 1, X1205_ALM0_BASE); + &alrm->time, 1, X1205_ALM0_BASE, alrm->enabled); } static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm) @@ -422,7 +493,7 @@ static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm) static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm) { return x1205_set_datetime(to_i2c_client(dev), - tm, 1, X1205_CCR_BASE); + tm, 1, X1205_CCR_BASE, 0); } static int x1205_rtc_proc(struct device *dev, struct seq_file *seq) -- cgit v1.2.3 From cce3ce89c1abde1298dd0e769ab9c14ea95d7384 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Fri, 4 Jul 2008 09:59:31 -0700 Subject: rtc: fix CMOS time error after writing /proc/acpi/alarm When writing /proc/acpi/alarm in adjust mode, e.g. echo "+0000-00-00 00:00:15" >/proc/acpi/alarm The "century" field should be read and added to "year" field before writing, otherwise the CMOS time will go back to 2000 years ago, e.g. # cat /proc/acpi/alarm 0008-06-21 11:38:46 Then the system time may be reset to the date of manufacture after rebooting. This patch fixed this issue. Signed-off-by: Huacai Chen Acked-by: Pavel Machek Acked-by: Zhao Yakui Acked-by: Alessandro Zummo Acked-by: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/sleep/proc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 224c57c03381..4ebbba2b6b19 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -315,8 +315,11 @@ acpi_system_write_alarm(struct file *file, cmos_bcd_write(day, acpi_gbl_FADT.day_alarm, rtc_control); if (acpi_gbl_FADT.month_alarm) cmos_bcd_write(mo, acpi_gbl_FADT.month_alarm, rtc_control); - if (acpi_gbl_FADT.century) + if (acpi_gbl_FADT.century) { + if (adjust) + yr += cmos_bcd_read(acpi_gbl_FADT.century, rtc_control) * 100; cmos_bcd_write(yr / 100, acpi_gbl_FADT.century, rtc_control); + } /* enable the rtc alarm interrupt */ rtc_control |= RTC_AIE; CMOS_WRITE(rtc_control, RTC_CONTROL); -- cgit v1.2.3 From 66d715c95a39e84cd25204a665915621457d9691 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 4 Jul 2008 09:59:32 -0700 Subject: pci: VT3336 can't do MSI either It seems VT3336 can't do msi either as with its bro 3351. Disable it. Reported in the following SUSE bug. https://bugzilla.novell.com/show_bug.cgi?id=300001 Signed-off-by: Tejun Heo Acked-by: Jesse Barnes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pci/quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index a3497dc6ebcf..338a3f94b4d4 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1727,6 +1727,7 @@ static void __init quirk_disable_all_msi(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); /* Disable MSI on chipsets that are known to not support it */ -- cgit v1.2.3 From 450c622e9ff19888818d4e2c4d31adb97a5242b2 Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Fri, 4 Jul 2008 09:59:33 -0700 Subject: Miguel Ojeda has moved Signed-off-by: Miguel Ojeda Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- CREDITS | 5 +++-- Documentation/auxdisplay/cfag12864b | 4 ++-- Documentation/auxdisplay/cfag12864b-example.c | 2 +- Documentation/auxdisplay/ks0108 | 4 ++-- MAINTAINERS | 20 ++++++++++++-------- drivers/auxdisplay/Kconfig | 2 +- drivers/auxdisplay/cfag12864b.c | 4 ++-- drivers/auxdisplay/cfag12864bfb.c | 4 ++-- drivers/auxdisplay/ks0108.c | 4 ++-- include/linux/cfag12864b.h | 2 +- include/linux/ks0108.h | 2 +- 11 files changed, 29 insertions(+), 24 deletions(-) diff --git a/CREDITS b/CREDITS index 8fec7b3f96d5..e97bea06b59f 100644 --- a/CREDITS +++ b/CREDITS @@ -2611,8 +2611,9 @@ S: Perth, Western Australia S: Australia N: Miguel Ojeda Sandonis -E: maxextreme@gmail.com -W: http://maxextreme.googlepages.com/ +E: miguel.ojeda.sandonis@gmail.com +W: http://miguelojeda.es +W: http://jair.lab.fi.uva.es/~migojed/ D: Author of the ks0108, cfag12864b and cfag12864bfb auxiliary display drivers. D: Maintainer of the auxiliary display drivers tree (drivers/auxdisplay/*) S: C/ Mieses 20, 9-B diff --git a/Documentation/auxdisplay/cfag12864b b/Documentation/auxdisplay/cfag12864b index b714183d4125..eb7be393a510 100644 --- a/Documentation/auxdisplay/cfag12864b +++ b/Documentation/auxdisplay/cfag12864b @@ -3,7 +3,7 @@ =================================== License: GPLv2 -Author & Maintainer: Miguel Ojeda Sandonis +Author & Maintainer: Miguel Ojeda Sandonis Date: 2006-10-27 @@ -22,7 +22,7 @@ Date: 2006-10-27 1. DRIVER INFORMATION --------------------- -This driver support one cfag12864b display at time. +This driver supports a cfag12864b LCD. --------------------- diff --git a/Documentation/auxdisplay/cfag12864b-example.c b/Documentation/auxdisplay/cfag12864b-example.c index 7bfac354d4c9..2caeea5e4993 100644 --- a/Documentation/auxdisplay/cfag12864b-example.c +++ b/Documentation/auxdisplay/cfag12864b-example.c @@ -4,7 +4,7 @@ * Description: cfag12864b LCD userspace example program * License: GPLv2 * - * Author: Copyright (C) Miguel Ojeda Sandonis + * Author: Copyright (C) Miguel Ojeda Sandonis * Date: 2006-10-31 * * This program is free software; you can redistribute it and/or modify diff --git a/Documentation/auxdisplay/ks0108 b/Documentation/auxdisplay/ks0108 index 92b03b60c613..8ddda0c8ceef 100644 --- a/Documentation/auxdisplay/ks0108 +++ b/Documentation/auxdisplay/ks0108 @@ -3,7 +3,7 @@ ========================================== License: GPLv2 -Author & Maintainer: Miguel Ojeda Sandonis +Author & Maintainer: Miguel Ojeda Sandonis Date: 2006-10-27 @@ -21,7 +21,7 @@ Date: 2006-10-27 1. DRIVER INFORMATION --------------------- -This driver support the ks0108 LCD controller. +This driver supports the ks0108 LCD controller. --------------------- diff --git a/MAINTAINERS b/MAINTAINERS index 13b7b19692e6..ba7ac13aba97 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -763,9 +763,10 @@ S: Maintained AUXILIARY DISPLAY DRIVERS P: Miguel Ojeda Sandonis -M: maxextreme@gmail.com +M: miguel.ojeda.sandonis@gmail.com L: linux-kernel@vger.kernel.org -W: http://auxdisplay.googlepages.com/ +W: http://miguelojeda.es/auxdisplay.htm +W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained AVR32 ARCHITECTURE @@ -1055,16 +1056,18 @@ S: Supported CFAG12864B LCD DRIVER P: Miguel Ojeda Sandonis -M: maxextreme@gmail.com +M: miguel.ojeda.sandonis@gmail.com L: linux-kernel@vger.kernel.org -W: http://auxdisplay.googlepages.com/ +W: http://miguelojeda.es/auxdisplay.htm +W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained CFAG12864BFB LCD FRAMEBUFFER DRIVER P: Miguel Ojeda Sandonis -M: maxextreme@gmail.com +M: miguel.ojeda.sandonis@gmail.com L: linux-kernel@vger.kernel.org -W: http://auxdisplay.googlepages.com/ +W: http://miguelojeda.es/auxdisplay.htm +W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained CFG80211 and NL80211 @@ -2428,9 +2431,10 @@ S: Maintained KS0108 LCD CONTROLLER DRIVER P: Miguel Ojeda Sandonis -M: maxextreme@gmail.com +M: miguel.ojeda.sandonis@gmail.com L: linux-kernel@vger.kernel.org -W: http://auxdisplay.googlepages.com/ +W: http://miguelojeda.es/auxdisplay.htm +W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained LAPB module diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig index 043353bd0600..14b9d5f4c203 100644 --- a/drivers/auxdisplay/Kconfig +++ b/drivers/auxdisplay/Kconfig @@ -64,7 +64,7 @@ config KS0108_DELAY Amount of time the ks0108 should wait between each control write to the parallel port. - If your driver seems to miss random writings, increment this. + If your LCD seems to miss random writings, increment this. If you don't know what I'm talking about, ignore it. diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c index 80bb06105387..683509f013ab 100644 --- a/drivers/auxdisplay/cfag12864b.c +++ b/drivers/auxdisplay/cfag12864b.c @@ -5,7 +5,7 @@ * License: GPLv2 * Depends: ks0108 * - * Author: Copyright (C) Miguel Ojeda Sandonis + * Author: Copyright (C) Miguel Ojeda Sandonis * Date: 2006-10-31 * * This program is free software; you can redistribute it and/or modify @@ -398,5 +398,5 @@ module_init(cfag12864b_init); module_exit(cfag12864b_exit); MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Miguel Ojeda Sandonis "); +MODULE_AUTHOR("Miguel Ojeda Sandonis "); MODULE_DESCRIPTION("cfag12864b LCD driver"); diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c index 307c190699e0..fe3a865be4e5 100644 --- a/drivers/auxdisplay/cfag12864bfb.c +++ b/drivers/auxdisplay/cfag12864bfb.c @@ -5,7 +5,7 @@ * License: GPLv2 * Depends: cfag12864b * - * Author: Copyright (C) Miguel Ojeda Sandonis + * Author: Copyright (C) Miguel Ojeda Sandonis * Date: 2006-10-31 * * This program is free software; you can redistribute it and/or modify @@ -186,5 +186,5 @@ module_init(cfag12864bfb_init); module_exit(cfag12864bfb_exit); MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Miguel Ojeda Sandonis "); +MODULE_AUTHOR("Miguel Ojeda Sandonis "); MODULE_DESCRIPTION("cfag12864b LCD framebuffer driver"); diff --git a/drivers/auxdisplay/ks0108.c b/drivers/auxdisplay/ks0108.c index e6c3646ef18c..5b93852392b8 100644 --- a/drivers/auxdisplay/ks0108.c +++ b/drivers/auxdisplay/ks0108.c @@ -5,7 +5,7 @@ * License: GPLv2 * Depends: parport * - * Author: Copyright (C) Miguel Ojeda Sandonis + * Author: Copyright (C) Miguel Ojeda Sandonis * Date: 2006-10-31 * * This program is free software; you can redistribute it and/or modify @@ -173,6 +173,6 @@ module_init(ks0108_init); module_exit(ks0108_exit); MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Miguel Ojeda Sandonis "); +MODULE_AUTHOR("Miguel Ojeda Sandonis "); MODULE_DESCRIPTION("ks0108 LCD Controller driver"); diff --git a/include/linux/cfag12864b.h b/include/linux/cfag12864b.h index 1605dd8aa646..6f9f19d66591 100644 --- a/include/linux/cfag12864b.h +++ b/include/linux/cfag12864b.h @@ -4,7 +4,7 @@ * Description: cfag12864b LCD driver header * License: GPLv2 * - * Author: Copyright (C) Miguel Ojeda Sandonis + * Author: Copyright (C) Miguel Ojeda Sandonis * Date: 2006-10-12 * * This program is free software; you can redistribute it and/or modify diff --git a/include/linux/ks0108.h b/include/linux/ks0108.h index a2c54acceb4e..cb311798e0bc 100644 --- a/include/linux/ks0108.h +++ b/include/linux/ks0108.h @@ -4,7 +4,7 @@ * Description: ks0108 LCD Controller driver header * License: GPLv2 * - * Author: Copyright (C) Miguel Ojeda Sandonis + * Author: Copyright (C) Miguel Ojeda Sandonis * Date: 2006-10-31 * * This program is free software; you can redistribute it and/or modify -- cgit v1.2.3 From f5c8f7dae75e1e6bb3200fc61302e4d5e2df3dc2 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 4 Jul 2008 09:59:33 -0700 Subject: ext3: add missing unlock to error path in ext3_quota_write() When write in ext3_quota_write() fails, we have to properly release i_mutex. One error path has been missing the unlock... Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ext3/super.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ext3/super.c b/fs/ext3/super.c index fe3119a71ada..2845425077e8 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -2875,8 +2875,10 @@ static ssize_t ext3_quota_write(struct super_block *sb, int type, blk++; } out: - if (len == towrite) + if (len == towrite) { + mutex_unlock(&inode->i_mutex); return err; + } if (inode->i_size < off+len-towrite) { i_size_write(inode, off+len-towrite); EXT3_I(inode)->i_disksize = inode->i_size; -- cgit v1.2.3 From 4d04e4fbf8fc9f5136a64d45e2c20de095c08efb Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 4 Jul 2008 09:59:34 -0700 Subject: ext4: add missing unlock to an error path in ext4_quota_write() When write in ext4_quota_write() fails, we have to properly release i_mutex. One error path has been missing the unlock... Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ext4/super.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index cb96f127c366..02bf24343979 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3337,8 +3337,10 @@ static ssize_t ext4_quota_write(struct super_block *sb, int type, blk++; } out: - if (len == towrite) + if (len == towrite) { + mutex_unlock(&inode->i_mutex); return err; + } if (inode->i_size < off+len-towrite) { i_size_write(inode, off+len-towrite); EXT4_I(inode)->i_disksize = inode->i_size; -- cgit v1.2.3 From 10dd08dc04c881dcc9f7f19e2a3ad8e0778e4db5 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 4 Jul 2008 09:59:34 -0700 Subject: reiserfs: add missing unlock to an error path in reiserfs_quota_write() When write in reiserfs_quota_write() fails, we have to properly release i_mutex. One error path has been missing the unlock... Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/reiserfs/super.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index ed424d708e69..1d40f2bd1970 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -2165,8 +2165,10 @@ static ssize_t reiserfs_quota_write(struct super_block *sb, int type, blk++; } out: - if (len == towrite) + if (len == towrite) { + mutex_unlock(&inode->i_mutex); return err; + } if (inode->i_size < off + len - towrite) i_size_write(inode, off + len - towrite); inode->i_version++; -- cgit v1.2.3 From c4a2d7fbec3029c8891a3ad5fceec2992096a3b7 Mon Sep 17 00:00:00 2001 From: Michael Halcrow Date: Fri, 4 Jul 2008 09:59:35 -0700 Subject: ecryptfs: remove unnecessary mux from ecryptfs_init_ecryptfs_miscdev() The misc_mtx should provide all the protection required to keep the daemon hash table sane during miscdev registration. Since this mutex is causing gratuitous lockdep warnings, this patch removes it. Signed-off-by: Michael Halcrow Reported-by: Cyrill Gorcunov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ecryptfs/miscdev.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c index 50c994a249a5..09a4522f65e6 100644 --- a/fs/ecryptfs/miscdev.c +++ b/fs/ecryptfs/miscdev.c @@ -575,13 +575,11 @@ int ecryptfs_init_ecryptfs_miscdev(void) int rc; atomic_set(&ecryptfs_num_miscdev_opens, 0); - mutex_lock(&ecryptfs_daemon_hash_mux); rc = misc_register(&ecryptfs_miscdev); if (rc) printk(KERN_ERR "%s: Failed to register miscellaneous device " "for communications with userspace daemons; rc = [%d]\n", __func__, rc); - mutex_unlock(&ecryptfs_daemon_hash_mux); return rc; } -- cgit v1.2.3 From da9eac8990dc614ab4756f2a3d84870b675f1f1e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 4 Jul 2008 09:59:36 -0700 Subject: lib: taint kernel in common report_bug() WARN path. Commit 95b570c9cef3b12356454c7112571b7e406b4b51 ("Taint kernel after WARN_ON(condition)") introduced a TAINT_WARN that was implemented for all architectures using the generic warn_on_slowpath(), which excluded any architecture that set HAVE_ARCH_WARN_ON. As all of the architectures that implement their own WARN_ON() all go through the report_bug() path (specifically handling BUG_TRAP_TYPE_WARN), taint the kernel there as well for consistency. Tested on avr32 and sh. Also relevant for s390, parisc, and powerpc. Signed-off-by: Haavard Skinnemoen Signed-off-by: Paul Mundt Acked-by: Kyle McMartin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/bug.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/lib/bug.c b/lib/bug.c index 530f38f55787..bfeafd60ee9f 100644 --- a/lib/bug.c +++ b/lib/bug.c @@ -37,6 +37,7 @@ */ #include #include +#include #include #include @@ -149,6 +150,7 @@ enum bug_trap_type report_bug(unsigned long bugaddr, struct pt_regs *regs) (void *)bugaddr); show_regs(regs); + add_taint(TAINT_WARN); return BUG_TRAP_TYPE_WARN; } -- cgit v1.2.3 From 7059d4b08eba2ad046395a04b02e34ca27304d8f Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 4 Jul 2008 09:59:37 -0700 Subject: gpio: pca953x (i2c) handles max7310 too The pca953x driver can handle another 8-bit I/O expander, the max7310. This patch adds that chip to the list of supported IDs in that driver, and expands the Kconfig helptext accordingly. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/Kconfig | 14 ++++++++++---- drivers/gpio/pca953x.c | 2 +- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index bbd28342e771..008c38ba774f 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -28,12 +28,18 @@ config DEBUG_GPIO comment "I2C GPIO expanders:" config GPIO_PCA953X - tristate "PCA953x I/O ports" + tristate "PCA953x, PCA955x, and MAX7310 I/O ports" depends on I2C help - Say yes here to support the PCA9534 (8-bit), PCA9535 (16-bit), - PCA9536 (4-bit), PCA9537 (4-bit), PCA9538 (8-bit), and PCA9539 - (16-bit) I/O ports. These parts are made by NXP and TI. + Say yes here to provide access to several register-oriented + SMBus I/O expanders, made mostly by NXP or TI. Compatible + models include: + + 4 bits: pca9536, pca9537 + + 8 bits: max7310, pca9534, pca9538, pca9554, pca9557 + + 16 bits: pca9535, pca9539, pca9555 This driver can also be built as a module. If so, the module will be called pca953x. diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index 7e40e8a55edf..a380730b61ab 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -33,7 +33,7 @@ static const struct i2c_device_id pca953x_id[] = { { "pca9554", 8, }, { "pca9555", 16, }, { "pca9557", 8, }, - /* REVISIT several pca955x parts should work here too */ + { "max7310", 8, }, { } }; MODULE_DEVICE_TABLE(i2c, pca953x_id); -- cgit v1.2.3 From 05946bce839b4fed5442dbfab77060fb75e051f3 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 4 Jul 2008 09:59:38 -0700 Subject: fsl_diu_fb: fix build with CONFIG_PM=y, plus fix some warnings This patch fixes following build error when CONFIG_PM is set. CC drivers/video/fsl-diu-fb.o drivers/video/fsl-diu-fb.c: In function 'fsl_diu_suspend': drivers/video/fsl-diu-fb.c:1327: error: 'ofdev' undeclared (first use in this function) drivers/video/fsl-diu-fb.c:1327: error: (Each undeclared identifier is reported only once drivers/video/fsl-diu-fb.c:1327: error: for each function it appears in.) drivers/video/fsl-diu-fb.c: In function 'fsl_diu_resume': drivers/video/fsl-diu-fb.c:1337: error: 'ofdev' undeclared (first use in this function) While I'm at it, also fix this warning: drivers/video/fsl-diu-fb.c: In function 'fsl_diu_alloc': drivers/video/fsl-diu-fb.c:314: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'phys_addr_t' And these section mismatches: ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() Also, some sparse fixes: make two functions static, and use NULL where appropriate. There are still a lot of sparse warnings, mainly wrt absence of __iomem annotations, but some will require ugly __force stuff. I'll leave them for now, since proper fix would be not that trivial as few one-liners below. Signed-off-by: Anton Vorontsov Cc: Timur Tabi Cc: Antonino Daplas Cc: York Sun Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/fsl-diu-fb.c | 29 +++++++++++++++-------------- 1 file changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index 0a2785361ca3..712dabc6269f 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -286,7 +286,7 @@ static struct diu_pool pool; * rheap and make the furture large allocation fail. */ -void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys) +static void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys) { void *virt; @@ -311,12 +311,12 @@ void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys) memset(virt, 0, size); } - pr_debug("rh virt=%p phys=%lx\n", virt, *phys); + pr_debug("rh virt=%p phys=%llx\n", virt, (unsigned long long)*phys); return virt; } -void fsl_diu_free(void *p, unsigned long size) +static void fsl_diu_free(void *p, unsigned long size) { pr_debug("p=%p size=%lu\n", p, size); @@ -770,7 +770,7 @@ static int map_video_memory(struct fb_info *info) info->fix.smem_len = info->fix.line_length * info->var.yres_virtual; pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len); info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys); - if (info->screen_base == 0) { + if (info->screen_base == NULL) { printk(KERN_ERR "Unable to allocate fb memory\n"); return -ENOMEM; } @@ -788,7 +788,7 @@ static int map_video_memory(struct fb_info *info) static void unmap_video_memory(struct fb_info *info) { fsl_diu_free(info->screen_base, info->fix.smem_len); - info->screen_base = 0; + info->screen_base = NULL; info->fix.smem_start = 0; info->fix.smem_len = 0; } @@ -1158,7 +1158,7 @@ static int init_fbinfo(struct fb_info *info) return 0; } -static int install_fb(struct fb_info *info) +static int __devinit install_fb(struct fb_info *info) { int rc; struct mfb_info *mfbi = info->par; @@ -1233,7 +1233,7 @@ static int install_fb(struct fb_info *info) return 0; } -static void __exit uninstall_fb(struct fb_info *info) +static void uninstall_fb(struct fb_info *info) { struct mfb_info *mfbi = info->par; @@ -1287,7 +1287,7 @@ static int request_irq_local(int irq) /* Read to clear the status */ status = in_be32(&hw->int_status); - ret = request_irq(irq, fsl_diu_isr, 0, "diu", 0); + ret = request_irq(irq, fsl_diu_isr, 0, "diu", NULL); if (ret) pr_info("Request diu IRQ failed.\n"); else { @@ -1312,7 +1312,7 @@ static void free_irq_local(int irq) /* Disable all LCDC interrupt */ out_be32(&hw->int_mask, 0x1f); - free_irq(irq, 0); + free_irq(irq, NULL); } #ifdef CONFIG_PM @@ -1324,7 +1324,7 @@ static int fsl_diu_suspend(struct of_device *ofdev, pm_message_t state) { struct fsl_diu_data *machine_data; - machine_data = dev_get_drvdata(&ofdev->dev); + machine_data = dev_get_drvdata(&dev->dev); disable_lcdc(machine_data->fsl_diu_info[0]); return 0; @@ -1334,7 +1334,7 @@ static int fsl_diu_resume(struct of_device *ofdev) { struct fsl_diu_data *machine_data; - machine_data = dev_get_drvdata(&ofdev->dev); + machine_data = dev_get_drvdata(&dev->dev); enable_lcdc(machine_data->fsl_diu_info[0]); return 0; @@ -1353,7 +1353,8 @@ static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align) dma_addr_t paddr = 0; ssize = size + bytes_align; - buf->vaddr = dma_alloc_coherent(0, ssize, &paddr, GFP_DMA | __GFP_ZERO); + buf->vaddr = dma_alloc_coherent(NULL, ssize, &paddr, GFP_DMA | + __GFP_ZERO); if (!buf->vaddr) return -ENOMEM; @@ -1371,7 +1372,7 @@ static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align) static void free_buf(struct diu_addr *buf, u32 size, u32 bytes_align) { - dma_free_coherent(0, size + bytes_align, + dma_free_coherent(NULL, size + bytes_align, buf->vaddr, (buf->paddr - buf->offset)); return; } @@ -1411,7 +1412,7 @@ static ssize_t show_monitor(struct device *device, return diu_ops.show_monitor_port(machine_data->monitor_port, buf); } -static int fsl_diu_probe(struct of_device *ofdev, +static int __devinit fsl_diu_probe(struct of_device *ofdev, const struct of_device_id *match) { struct device_node *np = ofdev->node; -- cgit v1.2.3 From f93f18cd94626108021c4e681f48d2d99bca5b90 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Fri, 4 Jul 2008 09:59:39 -0700 Subject: Update taskstats-struct document for scaled time accounting Update Documentation/accounting/taskstats-struct.txt for TASKSTATS_VERSION 6, adding scaled time accounting. Signed-off-by: Hiroshi Shimamoto Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/accounting/taskstats-struct.txt | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/accounting/taskstats-struct.txt b/Documentation/accounting/taskstats-struct.txt index 8aa7529f8258..cd784f46bf8a 100644 --- a/Documentation/accounting/taskstats-struct.txt +++ b/Documentation/accounting/taskstats-struct.txt @@ -24,6 +24,8 @@ There are three different groups of fields in the struct taskstats: 4) Per-task and per-thread context switch count statistics +5) Time accounting for SMT machines + Future extension should add fields to the end of the taskstats struct, and should not change the relative position of each field within the struct. @@ -164,4 +166,8 @@ struct taskstats { __u64 nvcsw; /* Context voluntary switch counter */ __u64 nivcsw; /* Context involuntary switch counter */ +5) Time accounting for SMT machines + __u64 ac_utimescaled; /* utime scaled on frequency etc */ + __u64 ac_stimescaled; /* stime scaled on frequency etc */ + __u64 cpu_scaled_run_real_total; /* scaled cpu_run_real_total */ } -- cgit v1.2.3 From 77b96bd7e5ee0b44aed1b77fef5949bc19e8301f Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Fri, 4 Jul 2008 09:59:40 -0700 Subject: cciss: fix regression that no device nodes are created if no logical drives are configured. Fix regression in cciss driver that if no logical drives are configured, no device nodes at all get created. Signed-off-by: Stephen M. Cameron Acked-by: Mike Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/cciss.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 5f1e1cc6165a..f5521051a8dc 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3546,6 +3546,10 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, for (j = 0; j <= hba[i]->highest_lun; j++) add_disk(hba[i]->gendisk[j]); + /* we must register the controller even if no disks exist */ + if (hba[i]->highest_lun == -1) + add_disk(hba[i]->gendisk[0]); + return 1; clean4: -- cgit v1.2.3 From abc5f23a32919f3196d3fa22d5216ab192db236b Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Fri, 4 Jul 2008 09:59:42 -0700 Subject: delay accounting: maintainer update Update the delay accounting and taskstats maintainer to Balbir Singh. I spoke to Shailabh and he is now busy with other things. Cc: Shailabh Nagar Cc: Shailabh Nagar Signed-off-by: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ba7ac13aba97..64197efe800b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3183,8 +3183,8 @@ L: netdev@vger.kernel.org S: Maintained PER-TASK DELAY ACCOUNTING -P: Shailabh Nagar -M: nagar@watson.ibm.com +P: Balbir Singh +M: balbir@linux.vnet.ibm.com L: linux-kernel@vger.kernel.org S: Maintained @@ -3886,8 +3886,8 @@ M: hch@infradead.org S: Maintained TASKSTATS STATISTICS INTERFACE -P: Shailabh Nagar -M: nagar@watson.ibm.com +P: Balbir Singh +M: balbir@linux.vnet.ibm.com L: linux-kernel@vger.kernel.org S: Maintained -- cgit v1.2.3 From 71f77055deeab9708c00717352bec05aa125c713 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 4 Jul 2008 09:59:43 -0700 Subject: Doc*/kernel-parameters.txt: fix stale references Fix stale references to source files in kernel-parameters.txt. Signed-off-by: Pavel Machek Acked-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/kernel-parameters.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e07c432c731f..85c6f574e267 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -295,7 +295,7 @@ and is between 256 and 4096 characters. It is defined in the file when initialising the APIC and IO-APIC components. apm= [APM] Advanced Power Management - See header of arch/i386/kernel/apm.c. + See header of arch/x86/kernel/apm_32.c. arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards Format: ,, @@ -638,7 +638,7 @@ and is between 256 and 4096 characters. It is defined in the file elanfreq= [X86-32] See comment before function elanfreq_setup() in - arch/i386/kernel/cpu/cpufreq/elanfreq.c. + arch/x86/kernel/cpu/cpufreq/elanfreq.c. elevator= [IOSCHED] Format: {"anticipatory" | "cfq" | "deadline" | "noop"} -- cgit v1.2.3 From 292d73551d0aa19526c3417e791c529b49ebadf3 Mon Sep 17 00:00:00 2001 From: maximilian attems Date: Fri, 4 Jul 2008 09:59:43 -0700 Subject: hdaps: add support for various newer Lenovo thinkpads Adds R61, T61p, X61s, X61, Z61m, Z61p models to whitelist. Fixes this: cullen@lenny:~$ sudo modprobe hdaps FATAL: Error inserting hdaps (/lib/modules/2.6.22-10-generic/kernel/drivers/hwmon/hdaps.ko): No such device [25192.888000] hdaps: supported laptop not found! [25192.888000] hdaps: driver init failed (ret=-19)! Originally based on an Ubuntu patch that got it wrong, the dmidecode output of the corresponding laptops shows LENOVO as the manufacturer. https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/133636 tested on X61s: [ 184.893588] hdaps: inverting axis readings. [ 184.893588] hdaps: LENOVO ThinkPad X61s detected. [ 184.893588] input: hdaps as /class/input/input12 [ 184.924326] hdaps: driver successfully loaded. Cc: Klaus S. Madsen Cc: Chuck Short Cc: Jean Delvare Cc: Tim Gardner Signed-off-by: maximilian attems Cc: Mark M. Hoffman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/hdaps.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index 26df06f840eb..50f22690d611 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -516,17 +516,23 @@ static struct dmi_system_id __initdata hdaps_whitelist[] = { HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61"), HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"), HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61p"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61s"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad Z60m"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61m"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61p"), { .ident = NULL } }; -- cgit v1.2.3 From 7fc7228c0be9007f0e6a32c8a8ae340ea6246056 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 4 Jul 2008 09:59:46 -0700 Subject: mn10300: export certain arch symbols required to build allmodconfig Export kernel_thread() and empty_zero_page so that allmodconfig can be built for MN10300. Signed-off-by: David Howells Cc: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/mn10300_ksyms.c | 3 +++ arch/mn10300/kernel/process.c | 1 + 2 files changed, 4 insertions(+) diff --git a/arch/mn10300/kernel/mn10300_ksyms.c b/arch/mn10300/kernel/mn10300_ksyms.c index 6d19628634e3..544ee1ae8c41 100644 --- a/arch/mn10300/kernel/mn10300_ksyms.c +++ b/arch/mn10300/kernel/mn10300_ksyms.c @@ -10,8 +10,11 @@ */ #include #include +#include +EXPORT_SYMBOL(empty_zero_page); + EXPORT_SYMBOL(change_bit); EXPORT_SYMBOL(test_and_change_bit); diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c index 9c623c88387b..b28c9a60445b 100644 --- a/arch/mn10300/kernel/process.c +++ b/arch/mn10300/kernel/process.c @@ -153,6 +153,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); } +EXPORT_SYMBOL(kernel_thread); /* * free current thread data structures etc.. -- cgit v1.2.3 From fc26361ef0fbcad0406475fc6006fa4f09e60dce Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 4 Jul 2008 09:59:47 -0700 Subject: mn10300: provide __ucmpdi2() for MN10300 Provide __ucmpdi2() for MN10300 so that allmodconfig can be built. Signed-off-by: David Howells Cc: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/mn10300_ksyms.c | 2 ++ arch/mn10300/lib/Makefile | 2 +- arch/mn10300/lib/__ucmpdi2.S | 43 +++++++++++++++++++++++++++++++++++++ 3 files changed, 46 insertions(+), 1 deletion(-) create mode 100644 arch/mn10300/lib/__ucmpdi2.S diff --git a/arch/mn10300/kernel/mn10300_ksyms.c b/arch/mn10300/kernel/mn10300_ksyms.c index 544ee1ae8c41..f9eb9753a404 100644 --- a/arch/mn10300/kernel/mn10300_ksyms.c +++ b/arch/mn10300/kernel/mn10300_ksyms.c @@ -34,7 +34,9 @@ extern u64 __ashrdi3(u64, unsigned); extern u64 __ashldi3(u64, unsigned); extern u64 __lshrdi3(u64, unsigned); extern s64 __negdi2(s64); +extern int __ucmpdi2(u64, u64); EXPORT_SYMBOL(__ashrdi3); EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__lshrdi3); EXPORT_SYMBOL(__negdi2); +EXPORT_SYMBOL(__ucmpdi2); diff --git a/arch/mn10300/lib/Makefile b/arch/mn10300/lib/Makefile index fdfa9ec5b5bb..0cd2346f4c13 100644 --- a/arch/mn10300/lib/Makefile +++ b/arch/mn10300/lib/Makefile @@ -4,4 +4,4 @@ lib-y = delay.o usercopy.o checksum.o bitops.o memcpy.o memmove.o memset.o lib-y += do_csum.o -lib-y += __ashldi3.o __ashrdi3.o __lshrdi3.o negdi2.o +lib-y += __ashldi3.o __ashrdi3.o __lshrdi3.o negdi2.o __ucmpdi2.o diff --git a/arch/mn10300/lib/__ucmpdi2.S b/arch/mn10300/lib/__ucmpdi2.S new file mode 100644 index 000000000000..60dcbdfe386c --- /dev/null +++ b/arch/mn10300/lib/__ucmpdi2.S @@ -0,0 +1,43 @@ +/* __ucmpdi2.S: 64-bit unsigned compare + * + * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + + + .text + .p2align 4 + +############################################################################### +# +# int __ucmpdi2(unsigned long long a [D0:D1], +# unsigned long long b [(SP,12),(SP,16)]) +# +# - returns 0, 1, or 2 as a <, =, > b respectively. +# +############################################################################### + .globl __ucmpdi2 + .type __ucmpdi2,@function +__ucmpdi2: + mov (12,sp),a0 # b.lsw + mov (16,sp),a1 # b.msw + + sub a0,d0 + subc a1,d1 # may clear Z, never sets it + bne __ucmpdi2_differ # a.msw != b.msw + mov +1,d0 + rets + +__ucmpdi2_differ: + # C flag is set if LE, clear if GE + subc d0,d0 # -1 if LE, 0 if GE + add +1,d0 # 0 if LE, 1 if GE + add d0,d0 # 0 if LE, 2 if GE + rets + + .size __ucmpdi2, .-__ucmpdi2 -- cgit v1.2.3 From 93921f5c2ce7427cc30341c86882527d1d1d8770 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 4 Jul 2008 09:59:48 -0700 Subject: Introduce rculist.h In linux-next there is a commit ("rcu: split list.h and move rcu-protected lists into rculist.h") that moved the rcu related list iterators from list.h to rculist.h. Add a trivial version of the file now so that various subsystem trees can start using it now for -next changes and so reduce the build errors caused by adding uses of the moved functions. Cc: Franck Bui-Huu Acked-by: Paul E. McKenney Cc: Josh Triplett Acked-by: Ingo Molnar Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/rculist.h | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 include/linux/rculist.h diff --git a/include/linux/rculist.h b/include/linux/rculist.h new file mode 100644 index 000000000000..bde4586f4382 --- /dev/null +++ b/include/linux/rculist.h @@ -0,0 +1,6 @@ +#ifndef _LINUX_RCULIST_H +#define _LINUX_RCULIST_H + +#include + +#endif /* _LINUX_RCULIST_H */ -- cgit v1.2.3 From c76a58783d7bb2190872c5431e5ee44da7143fad Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Fri, 4 Jul 2008 09:59:49 -0700 Subject: man-pages is supported Starting last month, I reached a long-time goal: man-pages finally has a paid, full-time maintainer, thanks to a fellowship from the Linux Foundation. It's still a little unclear how long the LF money will last for the fellowship, but for the foreseeable future, I'll be working on: * Properly documenting every new Linux kernel-userland (and glibc) API, and every API change, that is released into the mainline kernel, ideally before actual release. (That's the ideal, but there's a quite a backlog, so I'm not going to achieve the ideal immediately.) * Testing new APIs, again ideally before they are released into the mainline kernel, and probably doing some light bug fixing while I'm at it (e.g., the recent utimensat() work). * Design review of new APIs, which of course can only usefully be done before they are released into the mainline kernel. * And of course accepting patches and dealing with bug reports for existing man pages. Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 64197efe800b..049ff31050d6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2668,8 +2668,8 @@ S: Supported MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7 P: Michael Kerrisk M: mtk.manpages@gmail.com -W: ftp://ftp.kernel.org/pub/linux/docs/manpages -S: Maintained +W: http://www.kernel.org/doc/man-pages +S: Supported MARVELL LIBERTAS WIRELESS DRIVER P: Dan Williams -- cgit v1.2.3 From 337e2ab5d1efca56c6fdd57bffaea7e7899e7283 Mon Sep 17 00:00:00 2001 From: Jess Guerrero Date: Fri, 4 Jul 2008 09:59:50 -0700 Subject: ntfs: update help text The url in the help text for ntfs should be updated. Acked-by: Anton Altaparmakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/Kconfig b/fs/Kconfig index cf12c403b8c7..2694648cbd1b 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -830,7 +830,7 @@ config NTFS_FS from the project web site. For more information see - and . + and . To compile this file system support as a module, choose M here: the module will be called ntfs. -- cgit v1.2.3 From 6d1029b56329b1cc9b7233e5333c1a48ddbbfad8 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 4 Jul 2008 09:59:51 -0700 Subject: add kernel-doc for simple_read_from_buffer and memory_read_from_buffer Add kernel-doc comments describing simple_read_from_buffer and memory_read_from_buffer. Signed-off-by: Akinobu Mita Cc: Christoph Hellwig Cc: "Randy.Dunlap" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/libfs.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/fs/libfs.c b/fs/libfs.c index 892d41cb3382..baeb71ee1cde 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -512,6 +512,20 @@ void simple_release_fs(struct vfsmount **mount, int *count) mntput(mnt); } +/** + * simple_read_from_buffer - copy data from the buffer to user space + * @to: the user space buffer to read to + * @count: the maximum number of bytes to read + * @ppos: the current position in the buffer + * @from: the buffer to read from + * @available: the size of the buffer + * + * The simple_read_from_buffer() function reads up to @count bytes from the + * buffer @from at offset @ppos into the user space address starting at @to. + * + * On success, the number of bytes read is returned and the offset @ppos is + * advanced by this number, or negative value is returned on error. + **/ ssize_t simple_read_from_buffer(void __user *to, size_t count, loff_t *ppos, const void *from, size_t available) { @@ -528,6 +542,20 @@ ssize_t simple_read_from_buffer(void __user *to, size_t count, loff_t *ppos, return count; } +/** + * memory_read_from_buffer - copy data from the buffer + * @to: the kernel space buffer to read to + * @count: the maximum number of bytes to read + * @ppos: the current position in the buffer + * @from: the buffer to read from + * @available: the size of the buffer + * + * The memory_read_from_buffer() function reads up to @count bytes from the + * buffer @from at offset @ppos into the kernel space address starting at @to. + * + * On success, the number of bytes read is returned and the offset @ppos is + * advanced by this number, or negative value is returned on error. + **/ ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos, const void *from, size_t available) { -- cgit v1.2.3 From e5dd3cbd81aad69bdf773ab63c06fbaabc2b767a Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 4 Jul 2008 09:59:52 -0700 Subject: w100fb: do not depend on SHARPSL Apart from Sharp SL-Cxx series, there are a few other devices that have ATI Imageon chips, among them HP iPAQ hx4700. Signed-off-by: Philipp Zabel Acked-by: Ian Molton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 002b61b4f0f6..e0c5f96b273d 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1825,12 +1825,13 @@ config FB_FSL_DIU config FB_W100 tristate "W100 frame buffer support" - depends on FB && PXA_SHARPSL + depends on FB && ARCH_PXA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT ---help--- Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. + It can also drive the w3220 chip found on iPAQ hx4700. This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The -- cgit v1.2.3 From 27c8d95f8c9ff83e4e4d8a90523d891427964c79 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 4 Jul 2008 09:59:53 -0700 Subject: w100fb: add 80 MHz modeline This is needed for HTC Blueangel (w3200). At 96MHz its screen flickers. Signed-off-by: Philipp Zabel Acked-by: Ian Molton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/w100fb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c index 30469bf906e5..d0674f1e3f10 100644 --- a/drivers/video/w100fb.c +++ b/drivers/video/w100fb.c @@ -1003,6 +1003,7 @@ static struct w100_pll_info xtal_14318000[] = { static struct w100_pll_info xtal_16000000[] = { /*freq M N_int N_fac tfgoal lock_time */ { 72, 1, 8, 0, 0xe0, 48}, /* tfgoal guessed */ + { 80, 1, 9, 0, 0xe0, 13}, /* tfgoal guessed */ { 95, 1, 10, 7, 0xe0, 38}, /* tfgoal guessed */ { 96, 1, 11, 0, 0xe0, 36}, /* tfgoal guessed */ { 0, 0, 0, 0, 0, 0}, -- cgit v1.2.3 From 4e0d13cbb71de2b1baf71ddd3c14f7ba8da810e5 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 4 Jul 2008 09:59:53 -0700 Subject: MFD maintainer We probably need someone to look after the few drivers/mfd patches coming every now and then. As agreed with Andrew, I'm ok to do so and my employer is fine with me spending a few working hours on it, if needed. Ben, Philipp, feel free to add your names there too if you wish. Signed-off-by: Samuel Ortiz Cc: "pHilipp Zabel" Cc: Ian Molton Cc: Ben Dooks Cc: Dmitry Baryshkov Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 049ff31050d6..f13f82ffae39 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2802,6 +2802,12 @@ W: https://tango.0pointer.de/mailman/listinfo/s270-linux W: http://0pointer.de/lennart/tchibo.html S: Maintained +MULTIFUNCTION DEVICES (MFD) +P: Samuel Ortiz +M: sameo@openedhand.com +L: linux-kernel@vger.kernel.org +S: Supported + MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM P: Pierre Ossman M: drzeus-mmc@drzeus.cx -- cgit v1.2.3 From bef67c5a7d3a9c45e091e36625c09c0c811e2672 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 4 Jul 2008 09:59:55 -0700 Subject: cgroups: document the effect of attaching PID 0 to a cgroup Document that a pid of zero(0) can be used to refer to the current task when attaching a task to a cgroup, as in the following usage: # echo 0 > /dev/cgroup/tasks This is consistent with existing cpuset behavior. Signed-off-by: Li Zefan Acked-by: Paul Jackson Acked-by: Dhaval Giani Cc: Paul Menage Cc: Balbir Singh Cc: Andrea Righi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cgroups.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/cgroups.txt b/Documentation/cgroups.txt index 824fc0274471..d9014aa0eb68 100644 --- a/Documentation/cgroups.txt +++ b/Documentation/cgroups.txt @@ -390,6 +390,10 @@ If you have several tasks to attach, you have to do it one after another: ... # /bin/echo PIDn > tasks +You can attach the current shell task by echoing 0: + +# echo 0 > tasks + 3. Kernel API ============= -- cgit v1.2.3 From 4b1295b0df28cffd40e6c6d7c4b88dec7af1eb76 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Fri, 4 Jul 2008 09:59:56 -0700 Subject: spi: fix the read path in spidev This got broken by the recent "fix rmmod $spi_driver while spidev-user is active". I tested the rmmod & write path but didn't check the read path. I am sorry. The read logic changed and spidev_sync_read() + spidev_sync_write() do not return zero on success anymore but the number of bytes that has been transfered over the bus. This patch changes the logic and copy_to_user() gets called again. The write path returns the number of bytes which are written to the underlying device what may be less than the requested size. This patch makes the same change to the read path or else we request a read of 20 bytes, get 10, don't call copy to user and report to the user that we read 10 bytes. [akpm@linux-foundation.org: remove test of known-to-be-zero local] Signed-off-by: Sebastian Siewior Acked-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spidev.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 799337f7fde1..f5b60c70389b 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -167,14 +167,14 @@ spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) mutex_lock(&spidev->buf_lock); status = spidev_sync_read(spidev, count); - if (status == 0) { + if (status > 0) { unsigned long missing; - missing = copy_to_user(buf, spidev->buffer, count); - if (count && missing == count) + missing = copy_to_user(buf, spidev->buffer, status); + if (missing == status) status = -EFAULT; else - status = count - missing; + status = status - missing; } mutex_unlock(&spidev->buf_lock); @@ -200,8 +200,6 @@ spidev_write(struct file *filp, const char __user *buf, missing = copy_from_user(spidev->buffer, buf, count); if (missing == 0) { status = spidev_sync_write(spidev, count); - if (status == 0) - status = count; } else status = -EFAULT; mutex_unlock(&spidev->buf_lock); -- cgit v1.2.3 From abbaeff38c00cb7f6817ec1cef406b27081ebedd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 4 Jul 2008 09:59:57 -0700 Subject: doc: doc maintainers Maintain the kernel's Documentation/ tree. This includes tree layout and contents, although not much in terms of new content production. That will usually have to be done by someone familiar with the software, at least in some rough form. Includes review and editorial assistance for people contributing changes to /Documentation. Also includes prodding people for content if something is in need of documentation. Signed-off-by: Randy Dunlap Acked-by: Michael Kerrisk Cc: Jonathan Corbet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index f13f82ffae39..8c4ad2302b8e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1423,6 +1423,14 @@ M: kristen.c.accardi@intel.com L: linux-acpi@vger.kernel.org S: Supported +DOCUMENTATION (/Documentation directory) +P: Michael Kerrisk +M: mtk.manpages@gmail.com +P: Randy Dunlap +M: rdunlap@xenotime.net +L: linux-doc@vger.kernel.org +S: Maintained + DOUBLETALK DRIVER P: James R. Van Zandt M: jrv@vanzandt.mv.com -- cgit v1.2.3 From 086f7316f0d400806d76323beefae996bb3849b1 Mon Sep 17 00:00:00 2001 From: "Andrew G. Morgan" Date: Fri, 4 Jul 2008 09:59:58 -0700 Subject: security: filesystem capabilities: fix fragile setuid fixup code This commit includes a bugfix for the fragile setuid fixup code in the case that filesystem capabilities are supported (in access()). The effect of this fix is gated on filesystem capability support because changing securebits is only supported when filesystem capabilities support is configured.) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Andrew G. Morgan Acked-by: Serge Hallyn Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/open.c | 37 ++++++++++++++++++++++--------------- include/linux/capability.h | 2 ++ include/linux/securebits.h | 15 ++++++++------- kernel/capability.c | 21 +++++++++++++++++++++ 4 files changed, 53 insertions(+), 22 deletions(-) diff --git a/fs/open.c b/fs/open.c index a1450086e92f..a99ad09c3197 100644 --- a/fs/open.c +++ b/fs/open.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -425,7 +426,7 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode) { struct nameidata nd; int old_fsuid, old_fsgid; - kernel_cap_t old_cap; + kernel_cap_t uninitialized_var(old_cap); /* !SECURE_NO_SETUID_FIXUP */ int res; if (mode & ~S_IRWXO) /* where's F_OK, X_OK, W_OK, R_OK? */ @@ -433,23 +434,27 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode) old_fsuid = current->fsuid; old_fsgid = current->fsgid; - old_cap = current->cap_effective; current->fsuid = current->uid; current->fsgid = current->gid; - /* - * Clear the capabilities if we switch to a non-root user - * - * FIXME: There is a race here against sys_capset. The - * capabilities can change yet we will restore the old - * value below. We should hold task_capabilities_lock, - * but we cannot because user_path_walk can sleep. - */ - if (current->uid) - cap_clear(current->cap_effective); - else - current->cap_effective = current->cap_permitted; + if (!issecure(SECURE_NO_SETUID_FIXUP)) { + /* + * Clear the capabilities if we switch to a non-root user + */ +#ifndef CONFIG_SECURITY_FILE_CAPABILITIES + /* + * FIXME: There is a race here against sys_capset. The + * capabilities can change yet we will restore the old + * value below. We should hold task_capabilities_lock, + * but we cannot because user_path_walk can sleep. + */ +#endif /* ndef CONFIG_SECURITY_FILE_CAPABILITIES */ + if (current->uid) + old_cap = cap_set_effective(__cap_empty_set); + else + old_cap = cap_set_effective(current->cap_permitted); + } res = __user_walk_fd(dfd, filename, LOOKUP_FOLLOW|LOOKUP_ACCESS, &nd); if (res) @@ -478,7 +483,9 @@ out_path_release: out: current->fsuid = old_fsuid; current->fsgid = old_fsgid; - current->cap_effective = old_cap; + + if (!issecure(SECURE_NO_SETUID_FIXUP)) + cap_set_effective(old_cap); return res; } diff --git a/include/linux/capability.h b/include/linux/capability.h index fa830f8de032..02673846d205 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -501,6 +501,8 @@ extern const kernel_cap_t __cap_empty_set; extern const kernel_cap_t __cap_full_set; extern const kernel_cap_t __cap_init_eff_set; +kernel_cap_t cap_set_effective(const kernel_cap_t pE_new); + int capable(int cap); int __capable(struct task_struct *t, int cap); diff --git a/include/linux/securebits.h b/include/linux/securebits.h index c1f19dbceb05..92f09bdf1175 100644 --- a/include/linux/securebits.h +++ b/include/linux/securebits.h @@ -7,14 +7,15 @@ inheritance of root-permissions and suid-root executable under compatibility mode. We raise the effective and inheritable bitmasks *of the executable file* if the effective uid of the new process is - 0. If the real uid is 0, we raise the inheritable bitmask of the + 0. If the real uid is 0, we raise the effective (legacy) bit of the executable file. */ #define SECURE_NOROOT 0 #define SECURE_NOROOT_LOCKED 1 /* make bit-0 immutable */ -/* When set, setuid to/from uid 0 does not trigger capability-"fixes" - to be compatible with old programs relying on set*uid to loose - privileges. When unset, setuid doesn't change privileges. */ +/* When set, setuid to/from uid 0 does not trigger capability-"fixup". + When unset, to provide compatiblility with old programs relying on + set*uid to gain/lose privilege, transitions to/from uid 0 cause + capabilities to be gained/lost. */ #define SECURE_NO_SETUID_FIXUP 2 #define SECURE_NO_SETUID_FIXUP_LOCKED 3 /* make bit-2 immutable */ @@ -26,10 +27,10 @@ #define SECURE_KEEP_CAPS 4 #define SECURE_KEEP_CAPS_LOCKED 5 /* make bit-4 immutable */ -/* Each securesetting is implemented using two bits. One bit specify +/* Each securesetting is implemented using two bits. One bit specifies whether the setting is on or off. The other bit specify whether the - setting is fixed or not. A setting which is fixed cannot be changed - from user-level. */ + setting is locked or not. A setting which is locked cannot be + changed from user-level. */ #define issecure_mask(X) (1 << (X)) #define issecure(X) (issecure_mask(X) & current->securebits) diff --git a/kernel/capability.c b/kernel/capability.c index cfbe44299488..901e0fdc3fff 100644 --- a/kernel/capability.c +++ b/kernel/capability.c @@ -121,6 +121,27 @@ static int cap_validate_magic(cap_user_header_t header, unsigned *tocopy) * uninteresting and/or not to be changed. */ +/* + * Atomically modify the effective capabilities returning the original + * value. No permission check is performed here - it is assumed that the + * caller is permitted to set the desired effective capabilities. + */ +kernel_cap_t cap_set_effective(const kernel_cap_t pE_new) +{ + kernel_cap_t pE_old; + + spin_lock(&task_capability_lock); + + pE_old = current->cap_effective; + current->cap_effective = pE_new; + + spin_unlock(&task_capability_lock); + + return pE_old; +} + +EXPORT_SYMBOL(cap_set_effective); + /** * sys_capget - get the capabilities of a given process. * @header: pointer to struct that contains capability version and -- cgit v1.2.3 From 1209726ce942047c9fefe7cd427dc36f8e9ded53 Mon Sep 17 00:00:00 2001 From: "Andrew G. Morgan" Date: Fri, 4 Jul 2008 09:59:59 -0700 Subject: security: filesystem capabilities: fix CAP_SETPCAP handling The filesystem capability support meaning for CAP_SETPCAP is less powerful than the non-filesystem capability support. As such, when filesystem capabilities are configured, we should not permit CAP_SETPCAP to 'enhance' the current process through strace manipulation of a child process. Signed-off-by: Andrew G. Morgan Acked-by: Serge Hallyn Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- security/commoncap.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/security/commoncap.c b/security/commoncap.c index 5edabc7542ae..33d343308413 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -103,10 +103,16 @@ static inline int cap_inh_is_capped(void) return (cap_capable(current, CAP_SETPCAP) != 0); } +static inline int cap_limit_ptraced_target(void) { return 1; } + #else /* ie., ndef CONFIG_SECURITY_FILE_CAPABILITIES */ static inline int cap_block_setpcap(struct task_struct *t) { return 0; } static inline int cap_inh_is_capped(void) { return 1; } +static inline int cap_limit_ptraced_target(void) +{ + return !capable(CAP_SETPCAP); +} #endif /* def CONFIG_SECURITY_FILE_CAPABILITIES */ @@ -342,9 +348,10 @@ void cap_bprm_apply_creds (struct linux_binprm *bprm, int unsafe) bprm->e_uid = current->uid; bprm->e_gid = current->gid; } - if (!capable (CAP_SETPCAP)) { - new_permitted = cap_intersect (new_permitted, - current->cap_permitted); + if (cap_limit_ptraced_target()) { + new_permitted = + cap_intersect(new_permitted, + current->cap_permitted); } } } -- cgit v1.2.3 From 51597acfd3c09073aeea94a0e6f76a931f8c22d2 Mon Sep 17 00:00:00 2001 From: Bastian Blank Date: Fri, 4 Jul 2008 10:00:00 -0700 Subject: Alpha Linux kernel fails with inconsistent kallsyms data The build of the Alpha Linux kernel currently fails[1] with inconsistent kallsyms data. As I never saw that before, I thought about hardware problems. But in fact it is a bug in the Linux kernel. The end of the rodata section is marked with the "__end_rodata" symbol. This symbol have different aligning constraints than the inittext parts and therefor the start marked "_sinittext". Because of that the __end_rodata symbol shifts between < _sinittext and == _sinittext. The later variant is seen as a code symbol and recorded in the kallsyms data. On fix would be to move the exception table a little bit and get some space between that two areas. [1]: http://buildd.debian.org/fetch.cgi?pkg=linux-2.6&arch=alpha&ver=2.6.25-5&stamp=1213919009&file=log&as=raw Cc: maximilian attems Cc: Richard Henderson Cc: Ivan Kokshaysky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/kernel/vmlinux.lds.S | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index f13249be17c5..ef37fc1acaea 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -25,6 +25,13 @@ SECTIONS } :kernel _etext = .; /* End of text section */ + NOTES :kernel :note + .dummy : { + *(.dummy) + } :kernel + + RODATA + /* Exception table */ . = ALIGN(16); __ex_table : { @@ -33,13 +40,6 @@ SECTIONS __stop___ex_table = .; } - NOTES :kernel :note - .dummy : { - *(.dummy) - } :kernel - - RODATA - /* Will be freed after init */ . = ALIGN(PAGE_SIZE); /* Init code and data */ -- cgit v1.2.3 From 985ee7f224cca8a0d622b24ec399f364c63fc274 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Fri, 4 Jul 2008 10:00:01 -0700 Subject: cpusets: document proc status cpus and mems allowed lists Provide a little documentation for the two new fields, Cpus_allowed_list and Mems_allowed_list, that were added to each /proc//status file a while back. Signed-off-by: Paul Jackson Acked-by: Michael Kerrisk Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cpusets.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index 353504de3084..894b844153ea 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -154,13 +154,15 @@ browsing and modifying the cpusets presently known to the kernel. No new system calls are added for cpusets - all support for querying and modifying cpusets is via this cpuset file system. -The /proc//status file for each task has two added lines, +The /proc//status file for each task has four added lines, displaying the tasks cpus_allowed (on which CPUs it may be scheduled) and mems_allowed (on which Memory Nodes it may obtain memory), -in the format seen in the following example: +in the two formats seen in the following example: Cpus_allowed: ffffffff,ffffffff,ffffffff,ffffffff + Cpus_allowed_list: 0-127 Mems_allowed: ffffffff,ffffffff + Mems_allowed_list: 0-63 Each cpuset is represented by a directory in the cgroup file system containing (on top of the standard cgroup files) the following -- cgit v1.2.3 From 8deacee4f5a64a79a626479ba5d05e5643467513 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 4 Jul 2008 10:00:01 -0700 Subject: MAINTAINERS: update the email address of Andreas Dilger The old one bounces. Signed-off-by: Geert Uytterhoeven Cc: Andreas Dilger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 8c4ad2302b8e..25cd6cb272f3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1637,13 +1637,13 @@ S: Maintained EXT3 FILE SYSTEM P: Stephen Tweedie, Andrew Morton -M: sct@redhat.com, akpm@linux-foundation.org, adilger@clusterfs.com +M: sct@redhat.com, akpm@linux-foundation.org, adilger@sun.com L: linux-ext4@vger.kernel.org S: Maintained EXT4 FILE SYSTEM P: Stephen Tweedie, Andrew Morton -M: sct@redhat.com, akpm@linux-foundation.org, adilger@clusterfs.com +M: sct@redhat.com, akpm@linux-foundation.org, adilger@sun.com L: linux-ext4@vger.kernel.org S: Maintained -- cgit v1.2.3 From 491539982aa01fa71de93c2a06ac5d890d4cf1e2 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Fri, 4 Jul 2008 10:00:02 -0700 Subject: cciss: read config to obtain max outstanding commands per controller This patch changes the way we determine the maximum number of outstanding commands for each controller. Most Smart Array controllers can support up to 1024 commands, the notable exceptions are the E200 and E200i. The next generation of controllers which were just added support a mode of operation called Zero Memory Raid (ZMR). In this mode they only support 64 outstanding commands. In Full Function Raid (FFR) mode they support 1024. We have been setting the queue depth by arbitrarily assigning some value for each controller. We needed a better way to set the queue depth to avoid lots of annoying "fifo full" messages. So we made the driver a little smarter. We now read the config table and subtract 4 from the returned value. The -4 is to allow some room for ioctl calls which are not tracked the same way as io commands are tracked. Please consider this for inclusion. Signed-off-by: Mike Miller Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/cciss.c | 66 +++++++++++++++++++++++++++++---------------------- 1 file changed, 37 insertions(+), 29 deletions(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index f5521051a8dc..d81632cd7d06 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -106,35 +106,34 @@ MODULE_DEVICE_TABLE(pci, cciss_pci_device_id); /* board_id = Subsystem Device ID & Vendor ID * product = Marketing Name for the board * access = Address of the struct of function pointers - * nr_cmds = Number of commands supported by controller */ static struct board_type products[] = { - {0x40700E11, "Smart Array 5300", &SA5_access, 512}, - {0x40800E11, "Smart Array 5i", &SA5B_access, 512}, - {0x40820E11, "Smart Array 532", &SA5B_access, 512}, - {0x40830E11, "Smart Array 5312", &SA5B_access, 512}, - {0x409A0E11, "Smart Array 641", &SA5_access, 512}, - {0x409B0E11, "Smart Array 642", &SA5_access, 512}, - {0x409C0E11, "Smart Array 6400", &SA5_access, 512}, - {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512}, - {0x40910E11, "Smart Array 6i", &SA5_access, 512}, - {0x3225103C, "Smart Array P600", &SA5_access, 512}, - {0x3223103C, "Smart Array P800", &SA5_access, 512}, - {0x3234103C, "Smart Array P400", &SA5_access, 512}, - {0x3235103C, "Smart Array P400i", &SA5_access, 512}, - {0x3211103C, "Smart Array E200i", &SA5_access, 120}, - {0x3212103C, "Smart Array E200", &SA5_access, 120}, - {0x3213103C, "Smart Array E200i", &SA5_access, 120}, - {0x3214103C, "Smart Array E200i", &SA5_access, 120}, - {0x3215103C, "Smart Array E200i", &SA5_access, 120}, - {0x3237103C, "Smart Array E500", &SA5_access, 512}, - {0x323D103C, "Smart Array P700m", &SA5_access, 512}, - {0x3241103C, "Smart Array P212", &SA5_access, 384}, - {0x3243103C, "Smart Array P410", &SA5_access, 384}, - {0x3245103C, "Smart Array P410i", &SA5_access, 384}, - {0x3247103C, "Smart Array P411", &SA5_access, 384}, - {0x3249103C, "Smart Array P812", &SA5_access, 384}, - {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120}, + {0x40700E11, "Smart Array 5300", &SA5_access}, + {0x40800E11, "Smart Array 5i", &SA5B_access}, + {0x40820E11, "Smart Array 532", &SA5B_access}, + {0x40830E11, "Smart Array 5312", &SA5B_access}, + {0x409A0E11, "Smart Array 641", &SA5_access}, + {0x409B0E11, "Smart Array 642", &SA5_access}, + {0x409C0E11, "Smart Array 6400", &SA5_access}, + {0x409D0E11, "Smart Array 6400 EM", &SA5_access}, + {0x40910E11, "Smart Array 6i", &SA5_access}, + {0x3225103C, "Smart Array P600", &SA5_access}, + {0x3223103C, "Smart Array P800", &SA5_access}, + {0x3234103C, "Smart Array P400", &SA5_access}, + {0x3235103C, "Smart Array P400i", &SA5_access}, + {0x3211103C, "Smart Array E200i", &SA5_access}, + {0x3212103C, "Smart Array E200", &SA5_access}, + {0x3213103C, "Smart Array E200i", &SA5_access}, + {0x3214103C, "Smart Array E200i", &SA5_access}, + {0x3215103C, "Smart Array E200i", &SA5_access}, + {0x3237103C, "Smart Array E500", &SA5_access}, + {0x323D103C, "Smart Array P700m", &SA5_access}, + {0x3241103C, "Smart Array P212", &SA5_access}, + {0x3243103C, "Smart Array P410", &SA5_access}, + {0x3245103C, "Smart Array P410i", &SA5_access}, + {0x3247103C, "Smart Array P411", &SA5_access}, + {0x3249103C, "Smart Array P812", &SA5_access}, + {0xFFFF103C, "Unknown Smart Array", &SA5_access}, }; /* How long to wait (in milliseconds) for board to go into simple mode */ @@ -3086,11 +3085,20 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) print_cfg_table(c->cfgtable); #endif /* CCISS_DEBUG */ + /* Some controllers support Zero Memory Raid (ZMR). + * When configured in ZMR mode the number of supported + * commands drops to 64. So instead of just setting an + * arbitrary value we make the driver a little smarter. + * We read the config table to tell us how many commands + * are supported on the controller then subtract 4 to + * leave a little room for ioctl calls. + */ + c->max_commands = readl(&(c->cfgtable->CmdsOutMax)); for (i = 0; i < ARRAY_SIZE(products); i++) { if (board_id == products[i].board_id) { c->product_name = products[i].product_name; c->access = *(products[i].access); - c->nr_cmds = products[i].nr_cmds; + c->nr_cmds = c->max_commands - 4; break; } } @@ -3110,7 +3118,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) if (subsystem_vendor_id == PCI_VENDOR_ID_HP) { c->product_name = products[i-1].product_name; c->access = *(products[i-1].access); - c->nr_cmds = products[i-1].nr_cmds; + c->nr_cmds = c->max_commands - 4; printk(KERN_WARNING "cciss: This is an unknown " "Smart Array controller.\n" "cciss: Please update to the latest driver " -- cgit v1.2.3 From e08c1694d9e2138204f2b79b73f0f159074ce2f5 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 4 Jul 2008 10:00:03 -0700 Subject: olpc: sdhci: add quirk for the Marvell CaFe's vdd/powerup issue This has been sitting around unloved for way too long.. The Marvell CaFe chip's SD implementation chokes during card insertion if one attempts to set the voltage and power up in the same SDHCI_POWER_CONTROL register write. This adds a quirk that does that particular dance in two steps. It also adds an entry to pci_ids.h for the CaFe chip's SD device. Signed-off-by: Andres Salomon Cc: Pierre Ossman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/sdhci.c | 18 ++++++++++++++++++ include/linux/pci_ids.h | 1 + 2 files changed, 19 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 07c2048b230b..5b74c8cf4409 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -55,6 +55,8 @@ static unsigned int debug_quirks = 0; #define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7) /* Controller needs to be reset after each request to stay stable */ #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8) +/* Controller needs voltage and power writes to happen separately */ +#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9) static const struct pci_device_id pci_ids[] __devinitdata = { { @@ -127,6 +129,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = { SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS, }, + { + .vendor = PCI_VENDOR_ID_MARVELL, + .device = PCI_DEVICE_ID_MARVELL_CAFE_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER, + }, + { .vendor = PCI_VENDOR_ID_JMICRON, .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD, @@ -774,6 +784,14 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) BUG(); } + /* + * At least the CaFe chip gets confused if we set the voltage + * and set turn on power at the same time, so set the voltage first. + */ + if ((host->chip->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)) + writeb(pwr & ~SDHCI_POWER_ON, + host->ioaddr + SDHCI_POWER_CONTROL); + writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL); out: diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index eafc9d6d2b35..65953822c9cb 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1520,6 +1520,7 @@ #define PCI_DEVICE_ID_MARVELL_GT64260 0x6430 #define PCI_DEVICE_ID_MARVELL_MV64360 0x6460 #define PCI_DEVICE_ID_MARVELL_MV64460 0x6480 +#define PCI_DEVICE_ID_MARVELL_CAFE_SD 0x4101 #define PCI_VENDOR_ID_V3 0x11b0 #define PCI_DEVICE_ID_V3_V960 0x0001 -- cgit v1.2.3 From 603ded16a308d0a7a17738c973e3c8cbcd5db7dd Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 4 Jul 2008 10:00:04 -0700 Subject: olpc: sdhci: add quirk for the Marvell CaFe's interrupt timeout The CaFe chip has a hardware bug that ends up with us getting a timeout value that's too small, causing the following sorts of problems: [ 60.525138] mmcblk0: error -110 transferring data [ 60.531477] end_request: I/O error, dev mmcblk0, sector 1484353 [ 60.533371] Buffer I/O error on device mmcblk0p2, logical block 181632 [ 60.533371] lost page write due to I/O error on mmcblk0p2 Presumably this is an off-by-one error in the hardware. Incrementing the timeout count value that we stuff into the TIMEOUT_CONTROL register gets us a value that works. This bug was originally discovered by Pierre Ossman, I believe. [thanks to Robert Millan for proving that this was still a problem] Signed-off-by: Andres Salomon Cc: Pierre Ossman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/sdhci.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 5b74c8cf4409..2b3f06a024f2 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -57,6 +57,8 @@ static unsigned int debug_quirks = 0; #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8) /* Controller needs voltage and power writes to happen separately */ #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9) +/* Controller has an off-by-one issue with timeout value */ +#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1<<10) static const struct pci_device_id pci_ids[] __devinitdata = { { @@ -134,7 +136,8 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_MARVELL_CAFE_SD, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER, + .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | + SDHCI_QUIRK_INCR_TIMEOUT_CONTROL, }, { @@ -479,6 +482,13 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) break; } + /* + * Compensate for an off-by-one error in the CaFe hardware; otherwise, + * a too-small count gives us interrupt timeouts. + */ + if ((host->chip->quirks & SDHCI_QUIRK_INCR_TIMEOUT_CONTROL)) + count++; + if (count >= 0xF) { printk(KERN_WARNING "%s: Too large timeout requested!\n", mmc_hostname(host->mmc)); -- cgit v1.2.3 From acb7669c125676e63cf96582455509216c39745e Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 4 Jul 2008 10:00:05 -0700 Subject: cpumask: introduce new APIs In linux-next there is a commit ("x86: Add performance variants of cpumask operators") which, as part of the 4096 cpu support work adds some new APIs for dealing with cpu masks. Add trivial versions of these now so that subsystems can update in a timely manner and avoid conflicts in linux-next and the next merge window. Cc: Mike Travis Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cpumask.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 5df3db58fcc6..c24875bd9c5b 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -353,6 +353,10 @@ static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp, for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask) #endif /* NR_CPUS */ +#define next_cpu_nr(n, src) next_cpu(n, src) +#define cpus_weight_nr(cpumask) cpus_weight(cpumask) +#define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask) + /* * The following particular system cpumasks and operations manage * possible, present and online cpus. Each of them is a fixed size -- cgit v1.2.3 From 2d5c1be8870383622809c25935fff00d2630c7a5 Mon Sep 17 00:00:00 2001 From: John Blackwood Date: Fri, 4 Jul 2008 10:00:05 -0700 Subject: mm: switch node meminfo Active & Inactive pages to Kbytes There is a bug in the output of /sys/devices/system/node/node[n]/meminfo where the Active and Inactive values are in pages instead of Kbytes. Looks like this occurred back in 2.6.20 when the code was changed over to use node_page_state(). Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/base/node.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/base/node.c b/drivers/base/node.c index 39f3d1b3a213..0f867a083338 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -84,8 +84,8 @@ static ssize_t node_read_meminfo(struct sys_device * dev, char * buf) nid, K(i.totalram), nid, K(i.freeram), nid, K(i.totalram - i.freeram), - nid, node_page_state(nid, NR_ACTIVE), - nid, node_page_state(nid, NR_INACTIVE), + nid, K(node_page_state(nid, NR_ACTIVE)), + nid, K(node_page_state(nid, NR_INACTIVE)), #ifdef CONFIG_HIGHMEM nid, K(i.totalhigh), nid, K(i.freehigh), -- cgit v1.2.3 From 26ff8c697a2c8f6974c2357d3f01cca91b20c964 Mon Sep 17 00:00:00 2001 From: Rajiv Andrade Date: Fri, 4 Jul 2008 10:00:06 -0700 Subject: Update MAINTAINERS file for the TPM device driver Acked-By: Debora Velarde Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 25cd6cb272f3..6476125363e0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3997,7 +3997,8 @@ W: http://www.buzzard.org.uk/toshiba/ S: Maintained TPM DEVICE DRIVER -P: Kylene Hall +P: Debora Velarde +P: Rajiv Andrade M: tpmdd-devel@lists.sourceforge.net W: http://tpmdd.sourceforge.net P: Marcel Selhorst -- cgit v1.2.3 From d823f6bfec2844493c05961133895de21fa0e02d Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 4 Jul 2008 10:00:07 -0700 Subject: devcgroup: fix odd behaviour when writing 'a' to devices.allow # cat /devcg/devices.list a *:* rwm # echo a > devices.allow # cat /devcg/devices.list a *:* rwm a 0:0 rwm This is odd and maybe confusing. With this patch, writing 'a' to devices.allow will add 'a *:* rwm' to the whitelist. Also a few fixes and updates to the document. Signed-off-by: Li Zefan Cc: Pavel Emelyanov Cc: Serge E. Hallyn Cc: Paul Menage Cc: Balbir Singh Cc: James Morris Cc: Chris Wright Cc: Stephen Smalley Cc: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/controllers/devices.txt | 8 ++++++-- security/device_cgroup.c | 2 ++ 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/Documentation/controllers/devices.txt b/Documentation/controllers/devices.txt index 4dcea42432c2..7cc6e6a60672 100644 --- a/Documentation/controllers/devices.txt +++ b/Documentation/controllers/devices.txt @@ -13,7 +13,7 @@ either an integer or * for all. Access is a composition of r The root device cgroup starts with rwm to 'all'. A child device cgroup gets a copy of the parent. Administrators can then remove devices from the whitelist or add new entries. A child cgroup can -never receive a device access which is denied its parent. However +never receive a device access which is denied by its parent. However when a device access is removed from a parent it will not also be removed from the child(ren). @@ -29,7 +29,11 @@ allows cgroup 1 to read and mknod the device usually known as echo a > /cgroups/1/devices.deny -will remove the default 'a *:* mrw' entry. +will remove the default 'a *:* rwm' entry. Doing + + echo a > /cgroups/1/devices.allow + +will add the 'a *:* rwm' entry to the whitelist. 3. Security diff --git a/security/device_cgroup.c b/security/device_cgroup.c index baf348834b66..fd764a0858d0 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -382,6 +382,8 @@ static ssize_t devcgroup_access_write(struct cgroup *cgroup, struct cftype *cft, case 'a': wh.type = DEV_ALL; wh.access = ACC_MASK; + wh.major = ~0; + wh.minor = ~0; goto handle; case 'b': wh.type = DEV_BLOCK; -- cgit v1.2.3 From 46b6d94eb04a718730c73b83db889341aad0515e Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Fri, 4 Jul 2008 10:00:09 -0700 Subject: doc: document the relax_domain_level kernel boot argument Document the kernel boot parameter: relax_domain_level=. Signed-off-by: Paul Jackson Cc: Michael Kerrisk Reviewed-by: Li Zefan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cpusets.txt | 3 +++ Documentation/kernel-parameters.txt | 4 ++++ 2 files changed, 7 insertions(+) diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index 894b844153ea..1f5a924d1e56 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -546,6 +546,9 @@ otherwise initial value -1 that indicates the cpuset has no request. ( 4 : search nodes in a chunk of node [on NUMA system] ) ( 5 : search system wide [on NUMA system] ) +The system default is architecture dependent. The system default +can be changed using the relax_domain_level= boot parameter. + This file is per-cpuset and affect the sched domain where the cpuset belongs to. Therefore if the flag 'sched_load_balance' of a cpuset is disabled, then 'sched_relax_domain_level' have no effect since diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 85c6f574e267..b52f47d588b4 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1679,6 +1679,10 @@ and is between 256 and 4096 characters. It is defined in the file Format: [,[,...]] See arch/*/kernel/reboot.c or arch/*/kernel/process.c + relax_domain_level= + [KNL, SMP] Set scheduler's default relax_domain_level. + See Documentation/cpusets.txt. + reserve= [KNL,BUGS] Force the kernel to ignore some iomem area reservetop= [X86-32] -- cgit v1.2.3 From bf5b1935d8e42b36a34645788eb261461fe07f2e Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Fri, 4 Jul 2008 12:51:20 +0200 Subject: mmc: don't use DMA on newer ENE controllers Even the newer ENE controllers have bugs in their DMA engine that make it too dangerous to use. Disable it until someone has figured out under which conditions it corrupts data. This has caused problems at least once, and can be found as bug report 10925 in the kernel bugzilla. Signed-off-by: Pierre Ossman Signed-off-by: Linus Torvalds --- drivers/mmc/host/sdhci.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 2b3f06a024f2..b413aa6c246b 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -119,7 +119,8 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS, + SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | + SDHCI_QUIRK_BROKEN_DMA, }, { @@ -128,7 +129,8 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS, + SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | + SDHCI_QUIRK_BROKEN_DMA, }, { -- cgit v1.2.3 From d79df630f622806c4d0e116fbaf6ebf6baf53461 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Fri, 4 Jul 2008 12:24:13 -0700 Subject: mempolicy: mask off internal flags for userspace API Flags considered internal to the mempolicy kernel code are stored as part of the "flags" member of struct mempolicy. Before exposing a policy type to userspace via get_mempolicy(), these internal flags must be masked. Flags exposed to userspace, however, should still be returned to the user. Signed-off-by: David Rientjes Signed-off-by: Linus Torvalds --- mm/mempolicy.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index a37a5034f63d..c94e58b192c3 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -729,7 +729,11 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask, } else { *policy = pol == &default_policy ? MPOL_DEFAULT : pol->mode; - *policy |= pol->flags; + /* + * Internal mempolicy flags must be masked off before exposing + * the policy to userspace. + */ + *policy |= (pol->flags & MPOL_MODE_FLAGS); } if (vma) { -- cgit v1.2.3 From 4b4f7280d7fd1feeff134c2cf2db32fd583b6c29 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 24 Jun 2008 23:03:48 +0200 Subject: x86 ACPI: normalize segment descriptor register on resume Some Dell laptops enter resume with apparent garbage in the segment descriptor registers (almost certainly the result of a botched transition from protected to real mode.) The only way to clean that up is to enter protected mode ourselves and clean out the descriptor registers. This fixes resume on Dell XPS M1210 and Dell D620. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=10927 Signed-off-by: H. Peter Anvin Cc: Andrew Morton Cc: Pavel Machek Cc: pm list Cc: Len Brown Signed-off-by: Ingo Molnar Tested-by: Kirill A. Shutemov Signed-off-by: Rafael J. Wysocki Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/realmode/wakeup.S | 38 +++++++++++++++++++++++++++++++++- arch/x86/kernel/acpi/realmode/wakeup.h | 5 +++++ arch/x86/kernel/acpi/sleep.c | 16 +++++++++++++- drivers/acpi/sleep/main.c | 5 ++--- 4 files changed, 59 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S index f9b77fb37e5b..3355973b12ac 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.S @@ -5,6 +5,7 @@ #include #include #include +#include .code16 .section ".header", "a" @@ -24,6 +25,11 @@ pmode_gdt: .quad 0 realmode_flags: .long 0 real_magic: .long 0 trampoline_segment: .word 0 +_pad1: .byte 0 +wakeup_jmp: .byte 0xea /* ljmpw */ +wakeup_jmp_off: .word 3f +wakeup_jmp_seg: .word 0 +wakeup_gdt: .quad 0, 0, 0 signature: .long 0x51ee1111 .text @@ -34,11 +40,34 @@ _start: cli cld + /* Apparently some dimwit BIOS programmers don't know how to + program a PM to RM transition, and we might end up here with + junk in the data segment descriptor registers. The only way + to repair that is to go into PM and fix it ourselves... */ + movw $16, %cx + lgdtl %cs:wakeup_gdt + movl %cr0, %eax + orb $X86_CR0_PE, %al + movl %eax, %cr0 + jmp 1f +1: ljmpw $8, $2f +2: + movw %cx, %ds + movw %cx, %es + movw %cx, %ss + movw %cx, %fs + movw %cx, %gs + + andb $~X86_CR0_PE, %al + movl %eax, %cr0 + jmp wakeup_jmp +3: /* Set up segments */ movw %cs, %ax movw %ax, %ds movw %ax, %es movw %ax, %ss + lidtl wakeup_idt movl $wakeup_stack_end, %esp @@ -98,7 +127,14 @@ bogus_real_magic: jmp 1b .data - .balign 4 + .balign 8 + + /* This is the standard real-mode IDT */ +wakeup_idt: + .word 0xffff /* limit */ + .long 0 /* address */ + .word 0 + .globl HEAP, heap_end HEAP: .long wakeup_heap diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h index ef8166fe8020..69d38d0b2b64 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.h +++ b/arch/x86/kernel/acpi/realmode/wakeup.h @@ -24,6 +24,11 @@ struct wakeup_header { u32 realmode_flags; u32 real_magic; u16 trampoline_segment; /* segment with trampoline code, 64-bit only */ + u8 _pad1; + u8 wakeup_jmp; + u16 wakeup_jmp_off; + u16 wakeup_jmp_seg; + u64 wakeup_gdt[3]; u32 signature; /* To check we have correct structure */ } __attribute__((__packed__)); diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index afc25ee9964b..36af01f029ed 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -50,6 +50,20 @@ int acpi_save_state_mem(void) header->video_mode = saved_video_mode; + header->wakeup_jmp_seg = acpi_wakeup_address >> 4; + /* GDT[0]: GDT self-pointer */ + header->wakeup_gdt[0] = + (u64)(sizeof(header->wakeup_gdt) - 1) + + ((u64)(acpi_wakeup_address + + ((char *)&header->wakeup_gdt - (char *)acpi_realmode)) + << 16); + /* GDT[1]: real-mode-like code segment */ + header->wakeup_gdt[1] = (0x009bULL << 40) + + ((u64)acpi_wakeup_address << 16) + 0xffff; + /* GDT[2]: real-mode-like data segment */ + header->wakeup_gdt[2] = (0x0093ULL << 40) + + ((u64)acpi_wakeup_address << 16) + 0xffff; + #ifndef CONFIG_64BIT store_gdt((struct desc_ptr *)&header->pmode_gdt); @@ -111,7 +125,7 @@ void __init acpi_reserve_bootmem(void) return; } - acpi_wakeup_address = acpi_realmode; + acpi_wakeup_address = virt_to_phys((void *)acpi_realmode); } diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index c3b0cd88d09f..495c63a3e0af 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -36,9 +36,8 @@ static int acpi_sleep_prepare(u32 acpi_state) if (!acpi_wakeup_address) { return -EFAULT; } - acpi_set_firmware_waking_vector((acpi_physical_address) - virt_to_phys((void *) - acpi_wakeup_address)); + acpi_set_firmware_waking_vector( + (acpi_physical_address)acpi_wakeup_address); } ACPI_FLUSH_CPU_CACHE(); -- cgit v1.2.3 From 64e83b5a919a65eb35b63dd7e07c188379ff8ce6 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 5 Jul 2008 00:05:30 +0200 Subject: x86 ACPI: fix resume from suspend to RAM on uniprocessor x86-64 Since the trampoline code is now used for ACPI resume from suspend to RAM, the trampoline page tables have to be fixed up during boot not only on SMP systems, but also on UP systems that use the trampoline. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=10923 Reported-by: Dionisus Torimens Signed-off-by: Rafael J. Wysocki Cc: Andi Kleen Cc: Andrew Morton Cc: pm list Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_64.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 10a1955bb1d1..b817974ef942 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -128,7 +128,7 @@ ident_complete: /* Fixup phys_base */ addq %rbp, phys_base(%rip) -#ifdef CONFIG_SMP +#ifdef CONFIG_X86_TRAMPOLINE addq %rbp, trampoline_level4_pgt + 0(%rip) addq %rbp, trampoline_level4_pgt + (511*8)(%rip) #endif -- cgit v1.2.3 From 3b7253238801a7b97b3929d8db2fa7a0721fb17b Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 16 Jun 2008 15:51:08 -0700 Subject: softlockup: print a module list on being stuck Most places in the kernel that go BUG: print a module list (which is very useful for doing statistics and finding patterns), however the softlockup detector does not do this yet. This patch adds the one line change to fix this gap. Signed-off-by: Arjan van de Ven Signed-off-by: Ingo Molnar --- kernel/softlockup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/softlockup.c b/kernel/softlockup.c index c828c2339cc9..a272d78185eb 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -120,6 +120,7 @@ void softlockup_tick(void) printk(KERN_ERR "BUG: soft lockup - CPU#%d stuck for %lus! [%s:%d]\n", this_cpu, now - touch_timestamp, current->comm, task_pid_nr(current)); + print_modules(); if (regs) show_regs(regs); else -- cgit v1.2.3 From 63dd10846d4917534e9ec7bddf43be786effe8b8 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:43 +0200 Subject: MXC: do not include board specific header from architecture include do not include board-mx31ads.h from hardware.h, instead include it directly only where needed. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mx31ads.c | 1 + include/asm-arm/arch-mxc/hardware.h | 32 ++++++++++++++++---------------- 2 files changed, 17 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 7e89bdc23a9f..5addbb7f711c 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -29,6 +29,7 @@ #include #include #include +#include /*! * @file mx31ads.c diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h index e87ff0679d5e..4ed2d8072d03 100644 --- a/include/asm-arm/arch-mxc/hardware.h +++ b/include/asm-arm/arch-mxc/hardware.h @@ -1,11 +1,20 @@ /* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. */ #ifndef __ASM_ARCH_MXC_HARDWARE_H__ @@ -19,13 +28,4 @@ #include -/* - * --------------------------------------------------------------------------- - * Board specific defines - * --------------------------------------------------------------------------- - */ -#ifdef CONFIG_MACH_MX31ADS -# include -#endif - #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ -- cgit v1.2.3 From 036bb15ec94216e28cb1550af0fdcdfb90c549df Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:44 +0200 Subject: IMX UART: do not assume 16MHz reference frequency We assumed a 16MHz reference frequency for the UART. While this is true for i.MX1 most of the time it is not true for MX27/MX31. Also, add handling for the ONEMS register which is present on newer versions of the chip and pass a sane minimum baudrate to uart_get_baud_rate(). Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 50 +++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 39 insertions(+), 11 deletions(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 5a375bf0ebf4..6226e66c7966 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -589,6 +589,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, unsigned long flags; unsigned int ucr2, old_ucr1, old_txrxen, baud, quot; unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + unsigned int div, num, denom, ufcr; /* * If we don't support modem control lines, don't allow @@ -634,7 +635,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, /* * Ask the core to calculate the divisor for us. */ - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16); quot = uart_get_divisor(port, baud); spin_lock_irqsave(&sport->port.lock, flags); @@ -684,14 +685,41 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, sport->port.membase + UCR2); old_txrxen &= (UCR2_TXEN | UCR2_RXEN); - /* set the baud rate. We assume uartclk = 16 MHz - * - * baud * 16 UBIR - 1 - * --------- = -------- - * uartclk UBMR - 1 - */ - writel((baud / 100) - 1, sport->port.membase + UBIR); - writel(10000 - 1, sport->port.membase + UBMR); + div = sport->port.uartclk / (baud * 16); + if (div > 7) + div = 7; + if (!div) + div = 1; + + num = baud; + denom = port->uartclk / div / 16; + + /* shift num and denom right until they fit into 16 bits */ + while (num > 0x10000 || denom > 0x10000) { + num >>= 1; + denom >>= 1; + } + if (num > 0) + num -= 1; + if (denom > 0) + denom -= 1; + + writel(num, sport->port.membase + UBIR); + writel(denom, sport->port.membase + UBMR); + + if (div == 7) + div = 6; /* 6 in RFDIV means divide by 7 */ + else + div = 6 - div; + + ufcr = readl(sport->port.membase + UFCR); + ufcr = (ufcr & (~UFCR_RFDIV)) | + (div << 7); + writel(ufcr, sport->port.membase + UFCR); + +#ifdef ONEMS + writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS); +#endif writel(old_ucr1, sport->port.membase + UCR1); @@ -812,7 +840,6 @@ static struct imx_port imx_ports[] = { .membase = (void *)IMX_UART1_BASE, .mapbase = 0x00206000, .irq = UART1_MINT_RX, - .uartclk = 16000000, .fifosize = 32, .flags = UPF_BOOT_AUTOCONF, .ops = &imx_pops, @@ -828,7 +855,6 @@ static struct imx_port imx_ports[] = { .membase = (void *)IMX_UART2_BASE, .mapbase = 0x00207000, .irq = UART2_MINT_RX, - .uartclk = 16000000, .fifosize = 32, .flags = UPF_BOOT_AUTOCONF, .ops = &imx_pops, @@ -858,6 +884,8 @@ static void __init imx_init_ports(void) init_timer(&imx_ports[i].timer); imx_ports[i].timer.function = imx_timeout; imx_ports[i].timer.data = (unsigned long)&imx_ports[i]; + + imx_ports[i].port.uartclk = imx_get_perclk1(); } } -- cgit v1.2.3 From 2582d8c1655f2eda42d5358a242b256fd6e88571 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:45 +0200 Subject: IMX UART: Add board specific init/exit functions Add platform specific init functions. Also rename the struct platform_device dev into pdev. Signed-off-by: Sascha Hauer --- drivers/serial/imx.c | 28 +++++++++++++++++++--------- include/asm-arm/arch-imx/imx-uart.h | 2 ++ 2 files changed, 21 insertions(+), 9 deletions(-) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 6226e66c7966..77968432b81e 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -1078,30 +1078,40 @@ static int serial_imx_resume(struct platform_device *dev) return 0; } -static int serial_imx_probe(struct platform_device *dev) +static int serial_imx_probe(struct platform_device *pdev) { struct imxuart_platform_data *pdata; - imx_ports[dev->id].port.dev = &dev->dev; + imx_ports[pdev->id].port.dev = &pdev->dev; - pdata = (struct imxuart_platform_data *)dev->dev.platform_data; + pdata = pdev->dev.platform_data; if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) - imx_ports[dev->id].have_rtscts = 1; + imx_ports[pdev->id].have_rtscts = 1; + + if (pdata->init) + pdata->init(pdev); + + uart_add_one_port(&imx_reg, &imx_ports[pdev->id].port); + platform_set_drvdata(pdev, &imx_ports[pdev->id]); - uart_add_one_port(&imx_reg, &imx_ports[dev->id].port); - platform_set_drvdata(dev, &imx_ports[dev->id]); return 0; } -static int serial_imx_remove(struct platform_device *dev) +static int serial_imx_remove(struct platform_device *pdev) { - struct imx_port *sport = platform_get_drvdata(dev); + struct imxuart_platform_data *pdata; + struct imx_port *sport = platform_get_drvdata(pdev); - platform_set_drvdata(dev, NULL); + pdata = pdev->dev.platform_data; + + platform_set_drvdata(pdev, NULL); if (sport) uart_remove_one_port(&imx_reg, &sport->port); + if (pdata->exit) + pdata->exit(pdev); + return 0; } diff --git a/include/asm-arm/arch-imx/imx-uart.h b/include/asm-arm/arch-imx/imx-uart.h index 3a685e1780ea..d54eb1d48026 100644 --- a/include/asm-arm/arch-imx/imx-uart.h +++ b/include/asm-arm/arch-imx/imx-uart.h @@ -4,6 +4,8 @@ #define IMXUART_HAVE_RTSCTS (1<<0) struct imxuart_platform_data { + int (*init)(struct platform_device *pdev); + void (*exit)(struct platform_device *pdev); unsigned int flags; }; -- cgit v1.2.3 From dbff4e9ea2e83fda89143389bfb229cb29425a32 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:45 +0200 Subject: IMX UART: remove statically initialized tables This patch removes the statically initialized tables from the i.MX serial driver and makes the driver fully dependent on the information provided by the platform_device. Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/mx1ads.c | 10 ++++ drivers/serial/imx.c | 129 +++++++++++++++++++-------------------------- 2 files changed, 64 insertions(+), 75 deletions(-) diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index a9778c1587ab..9635d5812bcd 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -69,6 +69,11 @@ static struct resource imx_uart1_resources[] = { .end = (UART1_MINT_TX), .flags = IORESOURCE_IRQ, }, + [3] = { + .start = UART1_MINT_RTS, + .end = UART1_MINT_RTS, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device imx_uart1_device = { @@ -97,6 +102,11 @@ static struct resource imx_uart2_resources[] = { .end = (UART2_MINT_TX), .flags = IORESOURCE_IRQ, }, + [3] = { + .start = UART2_MINT_RTS, + .end = UART2_MINT_RTS, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device imx_uart2_device = { diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 77968432b81e..8d6cb745bd93 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -176,6 +176,8 @@ #define DRIVER_NAME "IMX-uart" +#define UART_NR 8 + struct imx_port { struct uart_port port; struct timer_list timer; @@ -829,65 +831,7 @@ static struct uart_ops imx_pops = { .verify_port = imx_verify_port, }; -static struct imx_port imx_ports[] = { - { - .txirq = UART1_MINT_TX, - .rxirq = UART1_MINT_RX, - .rtsirq = UART1_MINT_RTS, - .port = { - .type = PORT_IMX, - .iotype = UPIO_MEM, - .membase = (void *)IMX_UART1_BASE, - .mapbase = 0x00206000, - .irq = UART1_MINT_RX, - .fifosize = 32, - .flags = UPF_BOOT_AUTOCONF, - .ops = &imx_pops, - .line = 0, - }, - }, { - .txirq = UART2_MINT_TX, - .rxirq = UART2_MINT_RX, - .rtsirq = UART2_MINT_RTS, - .port = { - .type = PORT_IMX, - .iotype = UPIO_MEM, - .membase = (void *)IMX_UART2_BASE, - .mapbase = 0x00207000, - .irq = UART2_MINT_RX, - .fifosize = 32, - .flags = UPF_BOOT_AUTOCONF, - .ops = &imx_pops, - .line = 1, - }, - } -}; - -/* - * Setup the IMX serial ports. - * Note also that we support "console=ttySMXx" where "x" is either 0 or 1. - * Which serial port this ends up being depends on the machine you're - * running this kernel on. I'm not convinced that this is a good idea, - * but that's the way it traditionally works. - * - */ -static void __init imx_init_ports(void) -{ - static int first = 1; - int i; - - if (!first) - return; - first = 0; - - for (i = 0; i < ARRAY_SIZE(imx_ports); i++) { - init_timer(&imx_ports[i].timer); - imx_ports[i].timer.function = imx_timeout; - imx_ports[i].timer.data = (unsigned long)&imx_ports[i]; - - imx_ports[i].port.uartclk = imx_get_perclk1(); - } -} +static struct imx_port *imx_ports[UART_NR]; #ifdef CONFIG_SERIAL_IMX_CONSOLE static void imx_console_putchar(struct uart_port *port, int ch) @@ -906,7 +850,7 @@ static void imx_console_putchar(struct uart_port *port, int ch) static void imx_console_write(struct console *co, const char *s, unsigned int count) { - struct imx_port *sport = &imx_ports[co->index]; + struct imx_port *sport = imx_ports[co->index]; unsigned int old_ucr1, old_ucr2; /* @@ -1012,7 +956,7 @@ imx_console_setup(struct console *co, char *options) */ if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports)) co->index = 0; - sport = &imx_ports[co->index]; + sport = imx_ports[co->index]; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -1035,14 +979,6 @@ static struct console imx_console = { .data = &imx_reg, }; -static int __init imx_rs_console_init(void) -{ - imx_init_ports(); - register_console(&imx_console); - return 0; -} -console_initcall(imx_rs_console_init); - #define IMX_CONSOLE &imx_console #else #define IMX_CONSOLE NULL @@ -1080,21 +1016,63 @@ static int serial_imx_resume(struct platform_device *dev) static int serial_imx_probe(struct platform_device *pdev) { + struct imx_port *sport; struct imxuart_platform_data *pdata; + void __iomem *base; + int ret = 0; + struct resource *res; + + sport = kzalloc(sizeof(*sport), GFP_KERNEL); + if (!sport) + return -ENOMEM; - imx_ports[pdev->id].port.dev = &pdev->dev; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto free; + } + + base = ioremap(res->start, PAGE_SIZE); + if (!base) { + ret = -ENOMEM; + goto free; + } + + sport->port.dev = &pdev->dev; + sport->port.mapbase = res->start; + sport->port.membase = base; + sport->port.type = PORT_IMX, + sport->port.iotype = UPIO_MEM; + sport->port.irq = platform_get_irq(pdev, 0); + sport->rxirq = platform_get_irq(pdev, 0); + sport->txirq = platform_get_irq(pdev, 1); + sport->rtsirq = platform_get_irq(pdev, 2); + sport->port.fifosize = 32; + sport->port.ops = &imx_pops; + sport->port.flags = UPF_BOOT_AUTOCONF; + sport->port.line = pdev->id; + init_timer(&sport->timer); + sport->timer.function = imx_timeout; + sport->timer.data = (unsigned long)sport; + sport->port.uartclk = imx_get_perclk1(); + + imx_ports[pdev->id] = sport; pdata = pdev->dev.platform_data; if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) - imx_ports[pdev->id].have_rtscts = 1; + sport->have_rtscts = 1; if (pdata->init) pdata->init(pdev); - uart_add_one_port(&imx_reg, &imx_ports[pdev->id].port); - platform_set_drvdata(pdev, &imx_ports[pdev->id]); + uart_add_one_port(&imx_reg, &sport->port); + platform_set_drvdata(pdev, &sport->port); return 0; +free: + kfree(sport); + + return ret; } static int serial_imx_remove(struct platform_device *pdev) @@ -1112,6 +1090,9 @@ static int serial_imx_remove(struct platform_device *pdev) if (pdata->exit) pdata->exit(pdev); + iounmap(sport->port.membase); + kfree(sport); + return 0; } @@ -1133,8 +1114,6 @@ static int __init imx_serial_init(void) printk(KERN_INFO "Serial: IMX driver\n"); - imx_init_ports(); - ret = uart_register_driver(&imx_reg); if (ret) return ret; -- cgit v1.2.3 From 38a41fdf94c449c165213e4665c3f8a0d30f8aba Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:46 +0200 Subject: IMX: introduce clock API This patch introduces the clock API for i.MX and converts all in-Kernel drivers to use it. Signed-off-by: Sascha Hauer --- arch/arm/mach-imx/Makefile | 2 +- arch/arm/mach-imx/clock.c | 205 ++++++++++++++++++++++++++++++++++++ arch/arm/mach-imx/cpufreq.c | 20 +++- arch/arm/mach-imx/generic.c | 76 ------------- arch/arm/mach-imx/time.c | 23 ++-- drivers/mmc/host/imxmmc.c | 19 +++- drivers/serial/imx.c | 25 ++++- drivers/spi/spi_imx.c | 38 +++++-- include/asm-arm/arch-imx/hardware.h | 8 -- 9 files changed, 307 insertions(+), 109 deletions(-) create mode 100644 arch/arm/mach-imx/clock.c diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 88d5e61a2e13..b047c7e795a9 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -4,7 +4,7 @@ # Object file lists. -obj-y += irq.o time.o dma.o generic.o +obj-y += irq.o time.o dma.o generic.o clock.o obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c new file mode 100644 index 000000000000..6a90fe5578df --- /dev/null +++ b/arch/arm/mach-imx/clock.c @@ -0,0 +1,205 @@ +/* + * Copyright (C) 2008 Sascha Hauer , Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include + +#include +#include + +/* + * Very simple approach: We can't disable clocks, so we do + * not need refcounting + */ + +struct clk { + struct list_head node; + const char *name; + unsigned long (*get_rate)(void); +}; + +/* + * get the system pll clock in Hz + * + * mfi + mfn / (mfd +1) + * f = 2 * f_ref * -------------------- + * pd + 1 + */ +static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref) +{ + unsigned long long ll; + unsigned long quot; + + u32 mfi = (pll >> 10) & 0xf; + u32 mfn = pll & 0x3ff; + u32 mfd = (pll >> 16) & 0x3ff; + u32 pd = (pll >> 26) & 0xf; + + mfi = mfi <= 5 ? 5 : mfi; + + ll = 2 * (unsigned long long)f_ref * + ((mfi << 16) + (mfn << 16) / (mfd + 1)); + quot = (pd + 1) * (1 << 16); + ll += quot / 2; + do_div(ll, quot); + return (unsigned long)ll; +} + +static unsigned long imx_get_system_clk(void) +{ + u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512); + + return imx_decode_pll(SPCTL0, f_ref); +} + +static unsigned long imx_get_mcu_clk(void) +{ + return imx_decode_pll(MPCTL0, CLK32 * 512); +} + +/* + * get peripheral clock 1 ( UART[12], Timer[12], PWM ) + */ +static unsigned long imx_get_perclk1(void) +{ + return imx_get_system_clk() / (((PCDR) & 0xf)+1); +} + +/* + * get peripheral clock 2 ( LCD, SD, SPI[12] ) + */ +static unsigned long imx_get_perclk2(void) +{ + return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1); +} + +/* + * get peripheral clock 3 ( SSI ) + */ +static unsigned long imx_get_perclk3(void) +{ + return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1); +} + +/* + * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA ) + */ +static unsigned long imx_get_hclk(void) +{ + return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1); +} + +static struct clk clk_system_clk = { + .name = "system_clk", + .get_rate = imx_get_system_clk, +}; + +static struct clk clk_hclk = { + .name = "hclk", + .get_rate = imx_get_hclk, +}; + +static struct clk clk_mcu_clk = { + .name = "mcu_clk", + .get_rate = imx_get_mcu_clk, +}; + +static struct clk clk_perclk1 = { + .name = "perclk1", + .get_rate = imx_get_perclk1, +}; + +static struct clk clk_uart_clk = { + .name = "uart_clk", + .get_rate = imx_get_perclk1, +}; + +static struct clk clk_perclk2 = { + .name = "perclk2", + .get_rate = imx_get_perclk2, +}; + +static struct clk clk_perclk3 = { + .name = "perclk3", + .get_rate = imx_get_perclk3, +}; + +static struct clk *clks[] = { + &clk_perclk1, + &clk_perclk2, + &clk_perclk3, + &clk_system_clk, + &clk_hclk, + &clk_mcu_clk, + &clk_uart_clk, +}; + +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + + mutex_lock(&clocks_mutex); + list_for_each_entry(p, &clocks, node) { + if (!strcmp(p->name, id)) { + clk = p; + goto found; + } + } + +found: + mutex_unlock(&clocks_mutex); + + return clk; +} + +void clk_put(struct clk *clk) +{ +} + +int clk_enable(struct clk *clk) +{ + return 0; +} + +void clk_disable(struct clk *clk) +{ +} + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->get_rate(); +} + +int imx_clocks_init(void) +{ + int i; + + mutex_lock(&clocks_mutex); + for (i = 0; i < ARRAY_SIZE(clks); i++) + list_add(&clks[i]->node, &clocks); + mutex_unlock(&clocks_mutex); + + return 0; +} + diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c index e548ba74a4d2..be0809b33e08 100644 --- a/arch/arm/mach-imx/cpufreq.c +++ b/arch/arm/mach-imx/cpufreq.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include #include #include @@ -52,6 +54,8 @@ static u32 mpctl0_at_boot; static u32 bclk_div_at_boot; +static struct clk *system_clk, *mcu_clk; + static void imx_set_async_mode(void) { adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE); @@ -160,10 +164,10 @@ static unsigned int imx_get_speed(unsigned int cpu) cr = get_cr(); if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) { - freq = imx_get_system_clk(); + freq = clk_get_rate(system_clk); freq = (freq + bclk_div/2) / bclk_div; } else { - freq = imx_get_mcu_clk(); + freq = clk_get_rate(mcu_clk); if (cscr & CSCR_MPU_PRESC) freq /= 2; } @@ -201,7 +205,7 @@ static int imx_set_target(struct cpufreq_policy *policy, pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n", freq, mpctl0_at_boot); - sysclk = imx_get_system_clk(); + sysclk = clk_get_rate(system_clk); if (freq > sysclk / bclk_div_at_boot + 1000000) { freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation); @@ -290,6 +294,16 @@ static int __init imx_cpufreq_init(void) bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1; mpctl0_at_boot = 0; + system_clk = clk_get(NULL, "system_clk"); + if (IS_ERR(system_clk)) + return PTR_ERR(system_clk); + + mcu_clk = clk_get(NULL, "mcu_clk"); + if (IS_ERR(mcu_clk)) { + clk_put(system_clk); + return PTR_ERR(mcu_clk); + } + if((CSCR & CSCR_MPEN) && ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE)) mpctl0_at_boot = MPCTL0; diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index 4cfc9d3af28a..98ddd8a6d05f 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -214,82 +214,6 @@ int imx_irq_to_gpio(unsigned irq) EXPORT_SYMBOL(imx_irq_to_gpio); -/* - * get the system pll clock in Hz - * - * mfi + mfn / (mfd +1) - * f = 2 * f_ref * -------------------- - * pd + 1 - */ -static unsigned int imx_decode_pll(unsigned int pll, u32 f_ref) -{ - unsigned long long ll; - unsigned long quot; - - u32 mfi = (pll >> 10) & 0xf; - u32 mfn = pll & 0x3ff; - u32 mfd = (pll >> 16) & 0x3ff; - u32 pd = (pll >> 26) & 0xf; - - mfi = mfi <= 5 ? 5 : mfi; - - ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) ); - quot = (pd+1) * (1<<16); - ll += quot / 2; - do_div(ll, quot); - return (unsigned int) ll; -} - -unsigned int imx_get_system_clk(void) -{ - u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512); - - return imx_decode_pll(SPCTL0, f_ref); -} -EXPORT_SYMBOL(imx_get_system_clk); - -unsigned int imx_get_mcu_clk(void) -{ - return imx_decode_pll(MPCTL0, CLK32 * 512); -} -EXPORT_SYMBOL(imx_get_mcu_clk); - -/* - * get peripheral clock 1 ( UART[12], Timer[12], PWM ) - */ -unsigned int imx_get_perclk1(void) -{ - return imx_get_system_clk() / (((PCDR) & 0xf)+1); -} -EXPORT_SYMBOL(imx_get_perclk1); - -/* - * get peripheral clock 2 ( LCD, SD, SPI[12] ) - */ -unsigned int imx_get_perclk2(void) -{ - return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1); -} -EXPORT_SYMBOL(imx_get_perclk2); - -/* - * get peripheral clock 3 ( SSI ) - */ -unsigned int imx_get_perclk3(void) -{ - return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1); -} -EXPORT_SYMBOL(imx_get_perclk3); - -/* - * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA ) - */ -unsigned int imx_get_hclk(void) -{ - return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1); -} -EXPORT_SYMBOL(imx_get_hclk); - static struct resource imx_mmc_resources[] = { [0] = { .start = 0x00214000, diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index d86d124aea22..5a41e96e8586 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -86,10 +87,10 @@ static struct clocksource clocksource_imx = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static int __init imx_clocksource_init(void) +static int __init imx_clocksource_init(unsigned long rate) { clocksource_imx.mult = - clocksource_hz2mult(imx_get_perclk1(), clocksource_imx.shift); + clocksource_hz2mult(rate, clocksource_imx.shift); clocksource_register(&clocksource_imx); return 0; @@ -174,9 +175,9 @@ static struct clock_event_device clockevent_imx = { .rating = 200, }; -static int __init imx_clockevent_init(void) +static int __init imx_clockevent_init(unsigned long rate) { - clockevent_imx.mult = div_sc(imx_get_perclk1(), NSEC_PER_SEC, + clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC, clockevent_imx.shift); clockevent_imx.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_imx); @@ -190,13 +191,23 @@ static int __init imx_clockevent_init(void) return 0; } +extern int imx_clocks_init(void); static void __init imx_timer_init(void) { + struct clk *clk; + unsigned long rate; + + imx_clocks_init(); + + clk = clk_get(NULL, "perclk1"); + clk_enable(clk); + rate = clk_get_rate(clk); + imx_timer_hardware_init(); - imx_clocksource_init(); + imx_clocksource_init(rate); - imx_clockevent_init(); + imx_clockevent_init(rate); /* * Make irqs happen for the system timer diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c index 95f33e87a99c..ef2f6fc86541 100644 --- a/drivers/mmc/host/imxmmc.c +++ b/drivers/mmc/host/imxmmc.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include @@ -92,6 +93,8 @@ struct imxmci_host { unsigned char actual_bus_width; int prev_cmd_code; + + struct clk *clk; }; #define IMXMCI_PEND_IRQ_b 0 @@ -841,7 +844,7 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* The prescaler is 5 for PERCLK2 equal to 96MHz * then 96MHz / 5 = 19.2 MHz */ - clk=imx_get_perclk2(); + clk = clk_get_rate(host->clk); prescaler=(clk+(CLK_RATE*7)/8)/CLK_RATE; switch(prescaler) { case 0: @@ -994,6 +997,13 @@ static int imxmci_probe(struct platform_device *pdev) host->res = r; host->irq = irq; + host->clk = clk_get(&pdev->dev, "perclk2"); + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); + goto out; + } + clk_enable(host->clk); + imx_gpio_mode(PB8_PF_SD_DAT0); imx_gpio_mode(PB9_PF_SD_DAT1); imx_gpio_mode(PB10_PF_SD_DAT2); @@ -1053,6 +1063,10 @@ out: imx_dma_free(host->dma); host->dma_allocated=0; } + if (host->clk) { + clk_disable(host->clk); + clk_put(host->clk); + } } if (mmc) mmc_free_host(mmc); @@ -1082,6 +1096,9 @@ static int imxmci_remove(struct platform_device *pdev) tasklet_kill(&host->tasklet); + clk_disable(host->clk); + clk_put(host->clk); + release_resource(host->res); mmc_free_host(mmc); diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 8d6cb745bd93..9e2162ebf1bb 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -40,6 +40,7 @@ #include #include #include +#include #include #include @@ -184,6 +185,7 @@ struct imx_port { unsigned int old_status; int txirq,rxirq,rtsirq; int have_rtscts:1; + struct clk *clk; }; /* @@ -479,7 +481,8 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) * RFDIV is set such way to satisfy requested uartclk value */ val = TXTL << 10 | RXTL; - ufcr_rfdiv = (imx_get_perclk1() + sport->port.uartclk / 2) / sport->port.uartclk; + ufcr_rfdiv = (clk_get_rate(sport->clk) + sport->port.uartclk / 2) + / sport->port.uartclk; if(!ufcr_rfdiv) ufcr_rfdiv = 1; @@ -916,7 +919,7 @@ imx_console_get_options(struct imx_port *sport, int *baud, else ucfr_rfdiv = 6 - ucfr_rfdiv; - uartclk = imx_get_perclk1(); + uartclk = clk_get_rate(sport->clk); uartclk /= ucfr_rfdiv; { /* @@ -1054,7 +1057,15 @@ static int serial_imx_probe(struct platform_device *pdev) init_timer(&sport->timer); sport->timer.function = imx_timeout; sport->timer.data = (unsigned long)sport; - sport->port.uartclk = imx_get_perclk1(); + + sport->clk = clk_get(&pdev->dev, "uart_clk"); + if (IS_ERR(sport->clk)) { + ret = PTR_ERR(sport->clk); + goto unmap; + } + clk_enable(sport->clk); + + sport->port.uartclk = clk_get_rate(sport->clk); imx_ports[pdev->id] = sport; @@ -1069,6 +1080,8 @@ static int serial_imx_probe(struct platform_device *pdev) platform_set_drvdata(pdev, &sport->port); return 0; +unmap: + iounmap(sport->port.membase); free: kfree(sport); @@ -1084,8 +1097,12 @@ static int serial_imx_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); - if (sport) + if (sport) { uart_remove_one_port(&imx_reg, &sport->port); + clk_put(sport->clk); + } + + clk_disable(sport->clk); if (pdata->exit) pdata->exit(pdev); diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index c730d05bfeb6..bd0729b6b6ed 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include @@ -250,6 +251,8 @@ struct driver_data { int tx_dma_needs_unmap; size_t tx_map_len; u32 dummy_dma_buf ____cacheline_aligned; + + struct clk *clk; }; /* Runtime state */ @@ -855,15 +858,15 @@ static irqreturn_t spi_int(int irq, void *dev_id) return drv_data->transfer_handler(drv_data); } -static inline u32 spi_speed_hz(u32 data_rate) +static inline u32 spi_speed_hz(struct driver_data *drv_data, u32 data_rate) { - return imx_get_perclk2() / (4 << ((data_rate) >> 13)); + return clk_get_rate(drv_data->clk) / (4 << ((data_rate) >> 13)); } -static u32 spi_data_rate(u32 speed_hz) +static u32 spi_data_rate(struct driver_data *drv_data, u32 speed_hz) { u32 div; - u32 quantized_hz = imx_get_perclk2() >> 2; + u32 quantized_hz = clk_get_rate(drv_data->clk) >> 2; for (div = SPI_PERCLK2_DIV_MIN; div <= SPI_PERCLK2_DIV_MAX; @@ -947,7 +950,7 @@ static void pump_transfers(unsigned long data) tmp = transfer->speed_hz; if (tmp == 0) tmp = chip->max_speed_hz; - tmp = spi_data_rate(tmp); + tmp = spi_data_rate(drv_data, tmp); u32_EDIT(control, SPI_CONTROL_DATARATE, tmp); writel(control, regs + SPI_CONTROL); @@ -1109,7 +1112,7 @@ static int transfer(struct spi_device *spi, struct spi_message *msg) msg->actual_length = 0; /* Per transfer setup check */ - min_speed_hz = spi_speed_hz(SPI_CONTROL_DATARATE_MIN); + min_speed_hz = spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN); max_speed_hz = spi->max_speed_hz; list_for_each_entry(trans, &msg->transfers, transfer_list) { tmp = trans->bits_per_word; @@ -1176,6 +1179,7 @@ msg_rejected: applied and notified to the calling driver. */ static int setup(struct spi_device *spi) { + struct driver_data *drv_data = spi_master_get_devdata(spi->master); struct spi_imx_chip *chip_info; struct chip_data *chip; int first_setup = 0; @@ -1304,14 +1308,14 @@ static int setup(struct spi_device *spi) chip->n_bytes = (tmp <= 8) ? 1 : 2; /* SPI datarate */ - tmp = spi_data_rate(spi->max_speed_hz); + tmp = spi_data_rate(drv_data, spi->max_speed_hz); if (tmp == SPI_CONTROL_DATARATE_BAD) { status = -EINVAL; dev_err(&spi->dev, "setup - " "HW min speed (%d Hz) exceeds required " "max speed (%d Hz)\n", - spi_speed_hz(SPI_CONTROL_DATARATE_MIN), + spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN), spi->max_speed_hz); if (first_setup) goto err_first_setup; @@ -1321,7 +1325,7 @@ static int setup(struct spi_device *spi) } else { u32_EDIT(chip->control, SPI_CONTROL_DATARATE, tmp); /* Actual rounded max_speed_hz */ - tmp = spi_speed_hz(tmp); + tmp = spi_speed_hz(drv_data, tmp); spi->max_speed_hz = tmp; chip->max_speed_hz = tmp; } @@ -1352,7 +1356,7 @@ static int setup(struct spi_device *spi) chip->period & SPI_PERIOD_WAIT, spi->mode, spi->bits_per_word, - spi_speed_hz(SPI_CONTROL_DATARATE_MIN), + spi_speed_hz(drv_data, SPI_CONTROL_DATARATE_MIN), spi->max_speed_hz); return status; @@ -1465,6 +1469,14 @@ static int __init spi_imx_probe(struct platform_device *pdev) goto err_no_pdata; } + drv_data->clk = clk_get(&pdev->dev, "perclk2"); + if (IS_ERR(drv_data->clk)) { + dev_err(&pdev->dev, "probe - cannot get get\n"); + status = PTR_ERR(drv_data->clk); + goto err_no_clk; + } + clk_enable(drv_data->clk); + /* Allocate master with space for drv_data */ master = spi_alloc_master(dev, sizeof(struct driver_data)); if (!master) { @@ -1623,6 +1635,9 @@ err_no_iores: spi_master_put(master); err_no_pdata: + clk_disable(drv_data->clk); + clk_put(drv_data->clk); +err_no_clk: err_no_mem: return status; } @@ -1662,6 +1677,9 @@ static int __exit spi_imx_remove(struct platform_device *pdev) if (irq >= 0) free_irq(irq, drv_data); + clk_disable(drv_data->clk); + clk_put(drv_data->clk); + /* Release map resources */ iounmap(drv_data->regs); release_resource(drv_data->ioarea); diff --git a/include/asm-arm/arch-imx/hardware.h b/include/asm-arm/arch-imx/hardware.h index adffb6acf42a..6542ca5e8c33 100644 --- a/include/asm-arm/arch-imx/hardware.h +++ b/include/asm-arm/arch-imx/hardware.h @@ -73,14 +73,6 @@ */ extern void imx_gpio_mode( int gpio_mode ); -/* get frequencies in Hz */ -extern unsigned int imx_get_system_clk(void); -extern unsigned int imx_get_mcu_clk(void); -extern unsigned int imx_get_perclk1(void); /* UART[12], Timer[12], PWM */ -extern unsigned int imx_get_perclk2(void); /* LCD, SD, SPI[12] */ -extern unsigned int imx_get_perclk3(void); /* SSI */ -extern unsigned int imx_get_hclk(void); /* SDRAM, CSI, Memory Stick,*/ - /* I2C, DMA */ #endif #define MAXIRQNUM 62 -- cgit v1.2.3 From c0db2ea4e366c94dd3f880928c02534156e3d1b9 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:47 +0200 Subject: MXC family: Add clock handling Internal clock path handling for the mxc CPUs. Changed against the original Freescale code (and against clocklib for example): - clock rate is always calculated whenever one ask for the current rate (means struct clk has no more a member called "rate"). So switching the PLL base frequency will propagate immediately to all other clocks that are depending on this frequency. Signed-off-by: Juergen Beisert --- arch/arm/plat-mxc/Makefile | 2 +- arch/arm/plat-mxc/clock.c | 331 +++++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-mxc/clock.h | 67 ++++++++ 3 files changed, 399 insertions(+), 1 deletion(-) create mode 100644 arch/arm/plat-mxc/clock.c create mode 100644 include/asm-arm/arch-mxc/clock.h diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index f96dc0362068..3eb181cb7afb 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,4 +3,4 @@ # # Common support -obj-y := irq.o +obj-y := irq.o clock.o diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c new file mode 100644 index 000000000000..1aa86fd60d71 --- /dev/null +++ b/arch/arm/plat-mxc/clock.c @@ -0,0 +1,331 @@ +/* + * Based on arch/arm/plat-omap/clock.c + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen + * Modified for omap shared clock framework by Tony Lindgren + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +/* #define DEBUG */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +static LIST_HEAD(clocks); +static DEFINE_MUTEX(clocks_mutex); + +/*------------------------------------------------------------------------- + * Standard clock functions defined in include/linux/clk.h + *-------------------------------------------------------------------------*/ + +/* + * Retrieve a clock by name. + * + * Note that we first try to use device id on the bus + * and clock name. If this fails, we try to use ".". If this fails, + * we try to use clock name only. + * The reference count to the clock's module owner ref count is incremented. + */ +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + int idno; + const char *str; + + if (id == NULL) + return clk; + + if (dev == NULL || dev->bus != &platform_bus_type) + idno = -1; + else + idno = to_platform_device(dev)->id; + + mutex_lock(&clocks_mutex); + + list_for_each_entry(p, &clocks, node) { + if (p->id == idno && + strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + goto found; + } + } + + str = strrchr(id, '.'); + if (str) { + int cnt = str - id; + str++; + idno = simple_strtol(str, NULL, 10); + list_for_each_entry(p, &clocks, node) { + if (p->id == idno && + strlen(p->name) == cnt && + strncmp(id, p->name, cnt) == 0 && + try_module_get(p->owner)) { + clk = p; + goto found; + } + } + } + + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + goto found; + } + } + + printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id); + +found: + mutex_unlock(&clocks_mutex); + + return clk; +} +EXPORT_SYMBOL(clk_get); + +static void __clk_disable(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + __clk_disable(clk->parent); + __clk_disable(clk->secondary); + + if (!(--clk->usecount) && clk->disable) + clk->disable(clk); +} + +static int __clk_enable(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + __clk_enable(clk->parent); + __clk_enable(clk->secondary); + + if (clk->usecount++ == 0 && clk->enable) + clk->enable(clk); + + return 0; +} + +/* This function increments the reference count on the clock and enables the + * clock if not already enabled. The parent clock tree is recursively enabled + */ +int clk_enable(struct clk *clk) +{ + int ret = 0; + + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + ret = __clk_enable(clk); + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL(clk_enable); + +/* This function decrements the reference count on the clock and disables + * the clock when reference count is 0. The parent clock tree is + * recursively disabled + */ +void clk_disable(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + __clk_disable(clk); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_disable); + +/* Retrieve the *current* clock rate. If the clock itself + * does not provide a special calculation routine, ask + * its parent and so on, until one is able to return + * a valid clock rate + */ +unsigned long clk_get_rate(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return 0UL; + + if (clk->get_rate) + return clk->get_rate(clk); + + return clk_get_rate(clk->parent); +} +EXPORT_SYMBOL(clk_get_rate); + +/* Decrement the clock's module reference count */ +void clk_put(struct clk *clk) +{ + if (clk && !IS_ERR(clk)) + module_put(clk->owner); +} +EXPORT_SYMBOL(clk_put); + +/* Round the requested clock rate to the nearest supported + * rate that is less than or equal to the requested rate. + * This is dependent on the clock's current parent. + */ +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (clk == NULL || IS_ERR(clk) || !clk->round_rate) + return 0; + + return clk->round_rate(clk, rate); +} +EXPORT_SYMBOL(clk_round_rate); + +/* Set the clock to the requested clock rate. The rate must + * match a supported rate exactly based on what clk_round_rate returns + */ +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0) + return ret; + + mutex_lock(&clocks_mutex); + ret = clk->set_rate(clk, rate); + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +/* Set the clock's parent to another clock source */ +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = -EINVAL; + + if (clk == NULL || IS_ERR(clk) || parent == NULL || + IS_ERR(parent) || clk->set_parent == NULL) + return ret; + + mutex_lock(&clocks_mutex); + ret = clk->set_parent(clk, parent); + if (ret == 0) + clk->parent = parent; + mutex_unlock(&clocks_mutex); + + return ret; +} +EXPORT_SYMBOL(clk_set_parent); + +/* Retrieve the clock's parent clock source */ +struct clk *clk_get_parent(struct clk *clk) +{ + struct clk *ret = NULL; + + if (clk == NULL || IS_ERR(clk)) + return ret; + + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +/* + * Add a new clock to the clock tree. + */ +int clk_register(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + + mutex_lock(&clocks_mutex); + list_add(&clk->node, &clocks); + mutex_unlock(&clocks_mutex); + + return 0; +} +EXPORT_SYMBOL(clk_register); + +/* Remove a clock from the clock tree */ +void clk_unregister(struct clk *clk) +{ + if (clk == NULL || IS_ERR(clk)) + return; + + mutex_lock(&clocks_mutex); + list_del(&clk->node); + mutex_unlock(&clocks_mutex); +} +EXPORT_SYMBOL(clk_unregister); + +#ifdef CONFIG_PROC_FS +static int mxc_clock_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + struct clk *clkp; + char *p = page; + int len; + + list_for_each_entry(clkp, &clocks, node) { + p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id, + clk_get_rate(clkp), clkp->usecount); + if (clkp->parent) + p += sprintf(p, ", %s-%d\n", clkp->parent->name, + clkp->parent->id); + else + p += sprintf(p, "\n"); + } + + len = (p - page) - off; + if (len < 0) + len = 0; + + *eof = (len <= count) ? 1 : 0; + *start = page + off; + + return len; +} + +static int __init mxc_setup_proc_entry(void) +{ + struct proc_dir_entry *res; + + res = create_proc_read_entry("cpu/clocks", 0, NULL, + mxc_clock_read_proc, NULL); + if (!res) { + printk(KERN_ERR "Failed to create proc/cpu/clocks\n"); + return -ENOMEM; + } + return 0; +} + +late_initcall(mxc_setup_proc_entry); +#endif diff --git a/include/asm-arm/arch-mxc/clock.h b/include/asm-arm/arch-mxc/clock.h new file mode 100644 index 000000000000..24caa2b7c91d --- /dev/null +++ b/include/asm-arm/arch-mxc/clock.h @@ -0,0 +1,67 @@ +/* + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_CLOCK_H__ +#define __ASM_ARCH_MXC_CLOCK_H__ + +#ifndef __ASSEMBLY__ +#include + +struct module; + +struct clk { + struct list_head node; + struct module *owner; + const char *name; + int id; + /* Source clock this clk depends on */ + struct clk *parent; + /* Secondary clock to enable/disable with this clock */ + struct clk *secondary; + /* Reference count of clock enable/disable */ + __s8 usecount; + /* Register bit position for clock's enable/disable control. */ + u8 enable_shift; + /* Register address for clock's enable/disable control. */ + u32 enable_reg; + u32 flags; + /* get the current clock rate (always a fresh value) */ + unsigned long (*get_rate) (struct clk *); + /* Function ptr to set the clock to a new rate. The rate must match a + supported rate returned from round_rate. Leave blank if clock is not + programmable */ + int (*set_rate) (struct clk *, unsigned long); + /* Function ptr to round the requested clock rate to the nearest + supported rate that is less than or equal to the requested rate. */ + unsigned long (*round_rate) (struct clk *, unsigned long); + /* Function ptr to enable the clock. Leave blank if clock can not + be gated. */ + int (*enable) (struct clk *); + /* Function ptr to disable the clock. Leave blank if clock can not + be gated. */ + void (*disable) (struct clk *); + /* Function ptr to set the parent clock of the clock. */ + int (*set_parent) (struct clk *, struct clk *); +}; + +int clk_register(struct clk *clk); +void clk_unregister(struct clk *clk); + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_ARCH_MXC_CLOCK_H__ */ -- cgit v1.2.3 From df1bf4bdb2a3a26d4bde8ae1aefc16385dd4898f Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:48 +0200 Subject: i.MX3: introduce clock API This patch introduces the clock API for for arch-mxc Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/Makefile | 2 +- arch/arm/mach-mx3/clock.c | 1147 +++++++++++++++++++++++++++++++++++++ arch/arm/mach-mx3/crm_regs.h | 401 +++++++++++++ include/asm-arm/arch-mxc/common.h | 1 + 4 files changed, 1550 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-mx3/clock.c create mode 100644 arch/arm/mach-mx3/crm_regs.h diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index cbec997f332a..febb37f23935 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -4,5 +4,5 @@ # Object file lists. -obj-y := mm.o time.o +obj-y := mm.o time.o clock.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c new file mode 100644 index 000000000000..2f3635943e70 --- /dev/null +++ b/arch/arm/mach-mx3/clock.c @@ -0,0 +1,1147 @@ +/* + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "crm_regs.h" + +#define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */ + +static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post) +{ + u32 min_pre, temp_pre, old_err, err; + + if (div >= 512) { + *pre = 8; + *post = 64; + } else if (div >= 64) { + min_pre = (div - 1) / 64 + 1; + old_err = 8; + for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) { + err = div % temp_pre; + if (err == 0) { + *pre = temp_pre; + break; + } + err = temp_pre - err; + if (err < old_err) { + old_err = err; + *pre = temp_pre; + } + } + *post = (div + *pre - 1) / *pre; + } else if (div <= 8) { + *pre = div; + *post = 1; + } else { + *pre = 1; + *post = div; + } +} + +static struct clk mcu_pll_clk; +static struct clk mcu_main_clk; +static struct clk usb_pll_clk; +static struct clk serial_pll_clk; +static struct clk ipg_clk; +static struct clk ckih_clk; +static struct clk ahb_clk; + +static int _clk_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg |= 3 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + return 0; +} + +static void _clk_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(3 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); +} + +static void _clk_emi_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(3 << clk->enable_shift); + reg |= (1 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); +} + +static int _clk_pll_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + signed long pd = 1; /* Pre-divider */ + signed long mfi; /* Multiplication Factor (Integer part) */ + signed long mfn; /* Multiplication Factor (Integer part) */ + signed long mfd; /* Multiplication Factor (Denominator Part) */ + signed long tmp; + u32 ref_freq = clk_get_rate(clk->parent); + + while (((ref_freq / pd) * 10) > rate) + pd++; + + if ((ref_freq / pd) < PRE_DIV_MIN_FREQ) + return -EINVAL; + + /* the ref_freq/2 in the following is to round up */ + mfi = (((rate / 2) * pd) + (ref_freq / 2)) / ref_freq; + if (mfi < 5 || mfi > 15) + return -EINVAL; + + /* pick a mfd value that will work + * then solve for mfn */ + mfd = ref_freq / 50000; + + /* + * pll_freq * pd * mfd + * mfn = -------------------- - (mfi * mfd) + * 2 * ref_freq + */ + /* the tmp/2 is for rounding */ + tmp = ref_freq / 10000; + mfn = + ((((((rate / 2) + (tmp / 2)) / tmp) * pd) * mfd) / 10000) - + (mfi * mfd); + + mfn = mfn & 0x3ff; + pd--; + mfd--; + + /* Change the Pll value */ + reg = (mfi << MXC_CCM_PCTL_MFI_OFFSET) | + (mfn << MXC_CCM_PCTL_MFN_OFFSET) | + (mfd << MXC_CCM_PCTL_MFD_OFFSET) | (pd << MXC_CCM_PCTL_PD_OFFSET); + + if (clk == &mcu_pll_clk) + __raw_writel(reg, MXC_CCM_MPCTL); + else if (clk == &usb_pll_clk) + __raw_writel(reg, MXC_CCM_UPCTL); + else if (clk == &serial_pll_clk) + __raw_writel(reg, MXC_CCM_SRPCTL); + + return 0; +} + +static unsigned long _clk_pll_get_rate(struct clk *clk) +{ + long mfi, mfn, mfd, pdf, ref_clk, mfn_abs; + unsigned long reg, ccmr; + s64 temp; + unsigned int prcs; + + ccmr = __raw_readl(MXC_CCM_CCMR); + prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET; + if (prcs == 0x1) + ref_clk = CKIL_CLK_FREQ * 1024; + else + ref_clk = clk_get_rate(&ckih_clk); + + if (clk == &mcu_pll_clk) { + if ((ccmr & MXC_CCM_CCMR_MPE) == 0) + return ref_clk; + if ((ccmr & MXC_CCM_CCMR_MDS) != 0) + return ref_clk; + reg = __raw_readl(MXC_CCM_MPCTL); + } else if (clk == &usb_pll_clk) + reg = __raw_readl(MXC_CCM_UPCTL); + else if (clk == &serial_pll_clk) + reg = __raw_readl(MXC_CCM_SRPCTL); + else { + BUG(); + return 0; + } + + pdf = (reg & MXC_CCM_PCTL_PD_MASK) >> MXC_CCM_PCTL_PD_OFFSET; + mfd = (reg & MXC_CCM_PCTL_MFD_MASK) >> MXC_CCM_PCTL_MFD_OFFSET; + mfi = (reg & MXC_CCM_PCTL_MFI_MASK) >> MXC_CCM_PCTL_MFI_OFFSET; + mfi = (mfi <= 5) ? 5 : mfi; + mfn = mfn_abs = reg & MXC_CCM_PCTL_MFN_MASK; + + if (mfn >= 0x200) { + mfn |= 0xFFFFFE00; + mfn_abs = -mfn; + } + + ref_clk *= 2; + ref_clk /= pdf + 1; + + temp = (u64) ref_clk * mfn_abs; + do_div(temp, mfd + 1); + if (mfn < 0) + temp = -temp; + temp = (ref_clk * mfi) + temp; + + return temp; +} + +static int _clk_usb_pll_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CCMR); + reg |= MXC_CCM_CCMR_UPE; + __raw_writel(reg, MXC_CCM_CCMR); + + /* No lock bit on MX31, so using max time from spec */ + udelay(80); + + return 0; +} + +static void _clk_usb_pll_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CCMR); + reg &= ~MXC_CCM_CCMR_UPE; + __raw_writel(reg, MXC_CCM_CCMR); +} + +static int _clk_serial_pll_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CCMR); + reg |= MXC_CCM_CCMR_SPE; + __raw_writel(reg, MXC_CCM_CCMR); + + /* No lock bit on MX31, so using max time from spec */ + udelay(80); + + return 0; +} + +static void _clk_serial_pll_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_CCMR); + reg &= ~MXC_CCM_CCMR_SPE; + __raw_writel(reg, MXC_CCM_CCMR); +} + +#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off) +#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off) +#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off) + +static unsigned long _clk_mcu_main_get_rate(struct clk *clk) +{ + u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0); + + if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL) + return clk_get_rate(&serial_pll_clk); + else + return clk_get_rate(&mcu_pll_clk); +} + +static unsigned long _clk_hclk_get_rate(struct clk *clk) +{ + unsigned long max_pdf; + + max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK, + MXC_CCM_PDR0_MAX_PODF_OFFSET); + return clk_get_rate(clk->parent) / (max_pdf + 1); +} + +static unsigned long _clk_ipg_get_rate(struct clk *clk) +{ + unsigned long ipg_pdf; + + ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK, + MXC_CCM_PDR0_IPG_PODF_OFFSET); + return clk_get_rate(clk->parent) / (ipg_pdf + 1); +} + +static unsigned long _clk_nfc_get_rate(struct clk *clk) +{ + unsigned long nfc_pdf; + + nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK, + MXC_CCM_PDR0_NFC_PODF_OFFSET); + return clk_get_rate(clk->parent) / (nfc_pdf + 1); +} + +static unsigned long _clk_hsp_get_rate(struct clk *clk) +{ + unsigned long hsp_pdf; + + hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK, + MXC_CCM_PDR0_HSP_PODF_OFFSET); + return clk_get_rate(clk->parent) / (hsp_pdf + 1); +} + +static unsigned long _clk_usb_get_rate(struct clk *clk) +{ + unsigned long usb_pdf, usb_prepdf; + + usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK, + MXC_CCM_PDR1_USB_PODF_OFFSET); + usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK, + MXC_CCM_PDR1_USB_PRDF_OFFSET); + return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1); +} + +static unsigned long _clk_csi_get_rate(struct clk *clk) +{ + u32 reg, pre, post; + + reg = __raw_readl(MXC_CCM_PDR0); + pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >> + MXC_CCM_PDR0_CSI_PRDF_OFFSET; + pre++; + post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >> + MXC_CCM_PDR0_CSI_PODF_OFFSET; + post++; + return clk_get_rate(clk->parent) / (pre * post); +} + +static unsigned long _clk_csi_round_rate(struct clk *clk, unsigned long rate) +{ + u32 pre, post, parent = clk_get_rate(clk->parent); + u32 div = parent / rate; + + if (parent % rate) + div++; + + __calc_pre_post_dividers(div, &pre, &post); + + return parent / (pre * post); +} + +static int _clk_csi_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div, pre, post, parent = clk_get_rate(clk->parent); + + div = parent / rate; + + if ((parent / div) != rate) + return -EINVAL; + + __calc_pre_post_dividers(div, &pre, &post); + + /* Set CSI clock divider */ + reg = __raw_readl(MXC_CCM_PDR0) & + ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK); + reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET; + reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET; + __raw_writel(reg, MXC_CCM_PDR0); + + return 0; +} + +static unsigned long _clk_per_get_rate(struct clk *clk) +{ + unsigned long per_pdf; + + per_pdf = PDR0(MXC_CCM_PDR0_PER_PODF_MASK, + MXC_CCM_PDR0_PER_PODF_OFFSET); + return clk_get_rate(clk->parent) / (per_pdf + 1); +} + +static unsigned long _clk_ssi1_get_rate(struct clk *clk) +{ + unsigned long ssi1_pdf, ssi1_prepdf; + + ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK, + MXC_CCM_PDR1_SSI1_PODF_OFFSET); + ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK, + MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET); + return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1); +} + +static unsigned long _clk_ssi2_get_rate(struct clk *clk) +{ + unsigned long ssi2_pdf, ssi2_prepdf; + + ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK, + MXC_CCM_PDR1_SSI2_PODF_OFFSET); + ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK, + MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET); + return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1); +} + +static unsigned long _clk_firi_get_rate(struct clk *clk) +{ + unsigned long firi_pdf, firi_prepdf; + + firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK, + MXC_CCM_PDR1_FIRI_PODF_OFFSET); + firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK, + MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET); + return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1); +} + +static unsigned long _clk_firi_round_rate(struct clk *clk, unsigned long rate) +{ + u32 pre, post; + u32 parent = clk_get_rate(clk->parent); + u32 div = parent / rate; + + if (parent % rate) + div++; + + __calc_pre_post_dividers(div, &pre, &post); + + return parent / (pre * post); + +} + +static int _clk_firi_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div, pre, post, parent = clk_get_rate(clk->parent); + + div = parent / rate; + + if ((parent / div) != rate) + return -EINVAL; + + __calc_pre_post_dividers(div, &pre, &post); + + /* Set FIRI clock divider */ + reg = __raw_readl(MXC_CCM_PDR1) & + ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK); + reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET; + reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_PDR1); + + return 0; +} + +static unsigned long _clk_mbx_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / 2; +} + +static unsigned long _clk_mstick1_get_rate(struct clk *clk) +{ + unsigned long msti_pdf; + + msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK, + MXC_CCM_PDR2_MST1_PDF_OFFSET); + return clk_get_rate(clk->parent) / (msti_pdf + 1); +} + +static unsigned long _clk_mstick2_get_rate(struct clk *clk) +{ + unsigned long msti_pdf; + + msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK, + MXC_CCM_PDR2_MST2_PDF_OFFSET); + return clk_get_rate(clk->parent) / (msti_pdf + 1); +} + +static unsigned long ckih_rate; + +static unsigned long clk_ckih_get_rate(struct clk *clk) +{ + return ckih_rate; +} + +static struct clk ckih_clk = { + .name = "ckih", + .get_rate = clk_ckih_get_rate, +}; + +static unsigned long clk_ckil_get_rate(struct clk *clk) +{ + return CKIL_CLK_FREQ; +} + +static struct clk ckil_clk = { + .name = "ckil", + .get_rate = clk_ckil_get_rate, +}; + +static struct clk mcu_pll_clk = { + .name = "mcu_pll", + .parent = &ckih_clk, + .set_rate = _clk_pll_set_rate, + .get_rate = _clk_pll_get_rate, +}; + +static struct clk mcu_main_clk = { + .name = "mcu_main_clk", + .parent = &mcu_pll_clk, + .get_rate = _clk_mcu_main_get_rate, +}; + +static struct clk serial_pll_clk = { + .name = "serial_pll", + .parent = &ckih_clk, + .set_rate = _clk_pll_set_rate, + .get_rate = _clk_pll_get_rate, + .enable = _clk_serial_pll_enable, + .disable = _clk_serial_pll_disable, +}; + +static struct clk usb_pll_clk = { + .name = "usb_pll", + .parent = &ckih_clk, + .set_rate = _clk_pll_set_rate, + .get_rate = _clk_pll_get_rate, + .enable = _clk_usb_pll_enable, + .disable = _clk_usb_pll_disable, +}; + +static struct clk ahb_clk = { + .name = "ahb_clk", + .parent = &mcu_main_clk, + .get_rate = _clk_hclk_get_rate, +}; + +static struct clk per_clk = { + .name = "per_clk", + .parent = &usb_pll_clk, + .get_rate = _clk_per_get_rate, +}; + +static struct clk perclk_clk = { + .name = "perclk_clk", + .parent = &ipg_clk, +}; + +static struct clk cspi_clk[] = { + { + .name = "cspi_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_CSPI1_OFFSET, + .disable = _clk_disable,}, + { + .name = "cspi_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_CSPI2_OFFSET, + .disable = _clk_disable,}, + { + .name = "cspi_clk", + .id = 2, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_CSPI3_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk ipg_clk = { + .name = "ipg_clk", + .parent = &ahb_clk, + .get_rate = _clk_ipg_get_rate, +}; + +static struct clk emi_clk = { + .name = "emi_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_EMI_OFFSET, + .disable = _clk_emi_disable, +}; + +static struct clk gpt_clk = { + .name = "gpt_clk", + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_GPT_OFFSET, + .disable = _clk_disable, +}; + +static struct clk pwm_clk = { + .name = "pwm_clk", + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR1_PWM_OFFSET, + .disable = _clk_disable, +}; + +static struct clk epit_clk[] = { + { + .name = "epit_clk", + .id = 0, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_EPIT1_OFFSET, + .disable = _clk_disable,}, + { + .name = "epit_clk", + .id = 1, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_EPIT2_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk nfc_clk = { + .name = "nfc_clk", + .parent = &ahb_clk, + .get_rate = _clk_nfc_get_rate, +}; + +static struct clk scc_clk = { + .name = "scc_clk", + .parent = &ipg_clk, +}; + +static struct clk ipu_clk = { + .name = "ipu_clk", + .parent = &mcu_main_clk, + .get_rate = _clk_hsp_get_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_IPU_OFFSET, + .disable = _clk_disable, +}; + +static struct clk kpp_clk = { + .name = "kpp_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_KPP_OFFSET, + .disable = _clk_disable, +}; + +static struct clk wdog_clk = { + .name = "wdog_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_WDOG_OFFSET, + .disable = _clk_disable, +}; +static struct clk rtc_clk = { + .name = "rtc_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_RTC_OFFSET, + .disable = _clk_disable, +}; + +static struct clk usb_clk[] = { + { + .name = "usb_clk", + .parent = &usb_pll_clk, + .get_rate = _clk_usb_get_rate,}, + { + .name = "usb_ahb_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_USBOTG_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk csi_clk = { + .name = "csi_clk", + .parent = &serial_pll_clk, + .get_rate = _clk_csi_get_rate, + .round_rate = _clk_csi_round_rate, + .set_rate = _clk_csi_set_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_CSI_OFFSET, + .disable = _clk_disable, +}; + +static struct clk uart_clk[] = { + { + .name = "uart_clk", + .id = 0, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_UART1_OFFSET, + .disable = _clk_disable,}, + { + .name = "uart_clk", + .id = 1, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_UART2_OFFSET, + .disable = _clk_disable,}, + { + .name = "uart_clk", + .id = 2, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_UART3_OFFSET, + .disable = _clk_disable,}, + { + .name = "uart_clk", + .id = 3, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_UART4_OFFSET, + .disable = _clk_disable,}, + { + .name = "uart_clk", + .id = 4, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_UART5_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk i2c_clk[] = { + { + .name = "i2c_clk", + .id = 0, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_I2C1_OFFSET, + .disable = _clk_disable,}, + { + .name = "i2c_clk", + .id = 1, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_I2C2_OFFSET, + .disable = _clk_disable,}, + { + .name = "i2c_clk", + .id = 2, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_I2C3_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk owire_clk = { + .name = "owire_clk", + .parent = &perclk_clk, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_OWIRE_OFFSET, + .enable = _clk_enable, + .disable = _clk_disable, +}; + +static struct clk sdhc_clk[] = { + { + .name = "sdhc_clk", + .id = 0, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_SD_MMC1_OFFSET, + .disable = _clk_disable,}, + { + .name = "sdhc_clk", + .id = 1, + .parent = &perclk_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_SD_MMC2_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk ssi_clk[] = { + { + .name = "ssi_clk", + .parent = &serial_pll_clk, + .get_rate = _clk_ssi1_get_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_SSI1_OFFSET, + .disable = _clk_disable,}, + { + .name = "ssi_clk", + .id = 1, + .parent = &serial_pll_clk, + .get_rate = _clk_ssi2_get_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_SSI2_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk firi_clk = { + .name = "firi_clk", + .parent = &usb_pll_clk, + .round_rate = _clk_firi_round_rate, + .set_rate = _clk_firi_set_rate, + .get_rate = _clk_firi_get_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_FIRI_OFFSET, + .disable = _clk_disable, +}; + +static struct clk ata_clk = { + .name = "ata_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_ATA_OFFSET, + .disable = _clk_disable, +}; + +static struct clk mbx_clk = { + .name = "mbx_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_GACC_OFFSET, + .get_rate = _clk_mbx_get_rate, +}; + +static struct clk vpu_clk = { + .name = "vpu_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_GACC_OFFSET, + .get_rate = _clk_mbx_get_rate, +}; + +static struct clk rtic_clk = { + .name = "rtic_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR2, + .enable_shift = MXC_CCM_CGR2_RTIC_OFFSET, + .disable = _clk_disable, +}; + +static struct clk rng_clk = { + .name = "rng_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_RNG_OFFSET, + .disable = _clk_disable, +}; + +static struct clk sdma_clk[] = { + { + .name = "sdma_ahb_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_SDMA_OFFSET, + .disable = _clk_disable,}, + { + .name = "sdma_ipg_clk", + .parent = &ipg_clk,} +}; + +static struct clk mpeg4_clk = { + .name = "mpeg4_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET, + .disable = _clk_disable, +}; + +static struct clk vl2cc_clk = { + .name = "vl2cc_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_HANTRO_OFFSET, + .disable = _clk_disable, +}; + +static struct clk mstick_clk[] = { + { + .name = "mstick_clk", + .id = 0, + .parent = &usb_pll_clk, + .get_rate = _clk_mstick1_get_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_MEMSTICK1_OFFSET, + .disable = _clk_disable,}, + { + .name = "mstick_clk", + .id = 1, + .parent = &usb_pll_clk, + .get_rate = _clk_mstick2_get_rate, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR1, + .enable_shift = MXC_CCM_CGR1_MEMSTICK2_OFFSET, + .disable = _clk_disable,}, +}; + +static struct clk iim_clk = { + .name = "iim_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = MXC_CCM_CGR0, + .enable_shift = MXC_CCM_CGR0_IIM_OFFSET, + .disable = _clk_disable, +}; + +static unsigned long _clk_cko1_round_rate(struct clk *clk, unsigned long rate) +{ + u32 div, parent = clk_get_rate(clk->parent); + + div = parent / rate; + if (parent % rate) + div++; + + if (div > 8) + div = 16; + else if (div > 4) + div = 8; + else if (div > 2) + div = 4; + + return parent / div; +} + +static int _clk_cko1_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div, parent = clk_get_rate(clk->parent); + + div = parent / rate; + + if (div == 16) + div = 4; + else if (div == 8) + div = 3; + else if (div == 4) + div = 2; + else if (div == 2) + div = 1; + else if (div == 1) + div = 0; + else + return -EINVAL; + + reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOUTDIV_MASK; + reg |= div << MXC_CCM_COSR_CLKOUTDIV_OFFSET; + __raw_writel(reg, MXC_CCM_COSR); + + return 0; +} + +static unsigned long _clk_cko1_get_rate(struct clk *clk) +{ + u32 div; + + div = __raw_readl(MXC_CCM_COSR) & MXC_CCM_COSR_CLKOUTDIV_MASK >> + MXC_CCM_COSR_CLKOUTDIV_OFFSET; + + return clk_get_rate(clk->parent) / (1 << div); +} + +static int _clk_cko1_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOSEL_MASK; + + if (parent == &mcu_main_clk) + reg |= 0 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &ipg_clk) + reg |= 1 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &usb_pll_clk) + reg |= 2 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == mcu_main_clk.parent) + reg |= 3 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &ahb_clk) + reg |= 5 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &serial_pll_clk) + reg |= 7 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &ckih_clk) + reg |= 8 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &emi_clk) + reg |= 9 << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &ipu_clk) + reg |= 0xA << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &nfc_clk) + reg |= 0xB << MXC_CCM_COSR_CLKOSEL_OFFSET; + else if (parent == &uart_clk[0]) + reg |= 0xC << MXC_CCM_COSR_CLKOSEL_OFFSET; + else + return -EINVAL; + + __raw_writel(reg, MXC_CCM_COSR); + + return 0; +} + +static int _clk_cko1_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_COSR) | MXC_CCM_COSR_CLKOEN; + __raw_writel(reg, MXC_CCM_COSR); + + return 0; +} + +static void _clk_cko1_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(MXC_CCM_COSR) & ~MXC_CCM_COSR_CLKOEN; + __raw_writel(reg, MXC_CCM_COSR); +} + +static struct clk cko1_clk = { + .name = "cko1_clk", + .get_rate = _clk_cko1_get_rate, + .set_rate = _clk_cko1_set_rate, + .round_rate = _clk_cko1_round_rate, + .set_parent = _clk_cko1_set_parent, + .enable = _clk_cko1_enable, + .disable = _clk_cko1_disable, +}; + +static struct clk *mxc_clks[] = { + &ckih_clk, + &ckil_clk, + &mcu_pll_clk, + &usb_pll_clk, + &serial_pll_clk, + &mcu_main_clk, + &ahb_clk, + &per_clk, + &perclk_clk, + &cko1_clk, + &emi_clk, + &cspi_clk[0], + &cspi_clk[1], + &cspi_clk[2], + &ipg_clk, + &gpt_clk, + &pwm_clk, + &wdog_clk, + &rtc_clk, + &epit_clk[0], + &epit_clk[1], + &nfc_clk, + &ipu_clk, + &kpp_clk, + &usb_clk[0], + &usb_clk[1], + &csi_clk, + &uart_clk[0], + &uart_clk[1], + &uart_clk[2], + &uart_clk[3], + &uart_clk[4], + &i2c_clk[0], + &i2c_clk[1], + &i2c_clk[2], + &owire_clk, + &sdhc_clk[0], + &sdhc_clk[1], + &ssi_clk[0], + &ssi_clk[1], + &firi_clk, + &ata_clk, + &rtic_clk, + &rng_clk, + &sdma_clk[0], + &sdma_clk[1], + &mstick_clk[0], + &mstick_clk[1], + &scc_clk, + &iim_clk, +}; + +int __init mxc_clocks_init(unsigned long fref) +{ + u32 reg; + struct clk **clkp; + + ckih_rate = fref; + + for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++) + clk_register(*clkp); + + if (cpu_is_mx31()) { + clk_register(&mpeg4_clk); + clk_register(&mbx_clk); + } else { + clk_register(&vpu_clk); + clk_register(&vl2cc_clk); + } + + /* Turn off all possible clocks */ + __raw_writel(MXC_CCM_CGR0_GPT_MASK, MXC_CCM_CGR0); + __raw_writel(0, MXC_CCM_CGR1); + + __raw_writel(MXC_CCM_CGR2_EMI_MASK | + MXC_CCM_CGR2_IPMUX1_MASK | + MXC_CCM_CGR2_IPMUX2_MASK | + MXC_CCM_CGR2_MXCCLKENSEL_MASK | /* for MX32 */ + MXC_CCM_CGR2_CHIKCAMPEN_MASK | /* for MX32 */ + MXC_CCM_CGR2_OVRVPUBUSY_MASK | /* for MX32 */ + 1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for + MX32, but still required to be set */ + MXC_CCM_CGR2); + + clk_disable(&cko1_clk); + clk_disable(&usb_pll_clk); + + pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk)); + + clk_enable(&gpt_clk); + clk_enable(&emi_clk); + clk_enable(&iim_clk); + + clk_enable(&serial_pll_clk); + + if (mx31_revision() >= CHIP_REV_2_0) { + reg = __raw_readl(MXC_CCM_PMCR1); + /* No PLL restart on DVFS switch; enable auto EMI handshake */ + reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN; + __raw_writel(reg, MXC_CCM_PMCR1); + } + + return 0; +} + diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h new file mode 100644 index 000000000000..4a0e0ede23bb --- /dev/null +++ b/arch/arm/mach-mx3/crm_regs.h @@ -0,0 +1,401 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ARCH_ARM_MACH_MX3_CRM_REGS_H__ +#define __ARCH_ARM_MACH_MX3_CRM_REGS_H__ + +#define CKIH_CLK_FREQ 26000000 +#define CKIH_CLK_FREQ_27MHZ 27000000 +#define CKIL_CLK_FREQ 32768 + +#define MXC_CCM_BASE IO_ADDRESS(CCM_BASE_ADDR) + +/* Register addresses */ +#define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00) +#define MXC_CCM_PDR0 (MXC_CCM_BASE + 0x04) +#define MXC_CCM_PDR1 (MXC_CCM_BASE + 0x08) +#define MXC_CCM_RCSR (MXC_CCM_BASE + 0x0C) +#define MXC_CCM_MPCTL (MXC_CCM_BASE + 0x10) +#define MXC_CCM_UPCTL (MXC_CCM_BASE + 0x14) +#define MXC_CCM_SRPCTL (MXC_CCM_BASE + 0x18) +#define MXC_CCM_COSR (MXC_CCM_BASE + 0x1C) +#define MXC_CCM_CGR0 (MXC_CCM_BASE + 0x20) +#define MXC_CCM_CGR1 (MXC_CCM_BASE + 0x24) +#define MXC_CCM_CGR2 (MXC_CCM_BASE + 0x28) +#define MXC_CCM_WIMR (MXC_CCM_BASE + 0x2C) +#define MXC_CCM_LDC (MXC_CCM_BASE + 0x30) +#define MXC_CCM_DCVR0 (MXC_CCM_BASE + 0x34) +#define MXC_CCM_DCVR1 (MXC_CCM_BASE + 0x38) +#define MXC_CCM_DCVR2 (MXC_CCM_BASE + 0x3C) +#define MXC_CCM_DCVR3 (MXC_CCM_BASE + 0x40) +#define MXC_CCM_LTR0 (MXC_CCM_BASE + 0x44) +#define MXC_CCM_LTR1 (MXC_CCM_BASE + 0x48) +#define MXC_CCM_LTR2 (MXC_CCM_BASE + 0x4C) +#define MXC_CCM_LTR3 (MXC_CCM_BASE + 0x50) +#define MXC_CCM_LTBR0 (MXC_CCM_BASE + 0x54) +#define MXC_CCM_LTBR1 (MXC_CCM_BASE + 0x58) +#define MXC_CCM_PMCR0 (MXC_CCM_BASE + 0x5C) +#define MXC_CCM_PMCR1 (MXC_CCM_BASE + 0x60) +#define MXC_CCM_PDR2 (MXC_CCM_BASE + 0x64) + +/* Register bit definitions */ +#define MXC_CCM_CCMR_WBEN (1 << 27) +#define MXC_CCM_CCMR_CSCS (1 << 25) +#define MXC_CCM_CCMR_PERCS (1 << 24) +#define MXC_CCM_CCMR_SSI1S_OFFSET 18 +#define MXC_CCM_CCMR_SSI1S_MASK (0x3 << 18) +#define MXC_CCM_CCMR_SSI2S_OFFSET 21 +#define MXC_CCM_CCMR_SSI2S_MASK (0x3 << 21) +#define MXC_CCM_CCMR_LPM_OFFSET 14 +#define MXC_CCM_CCMR_LPM_MASK (0x3 << 14) +#define MXC_CCM_CCMR_FIRS_OFFSET 11 +#define MXC_CCM_CCMR_FIRS_MASK (0x3 << 11) +#define MXC_CCM_CCMR_UPE (1 << 9) +#define MXC_CCM_CCMR_SPE (1 << 8) +#define MXC_CCM_CCMR_MDS (1 << 7) +#define MXC_CCM_CCMR_SBYCS (1 << 4) +#define MXC_CCM_CCMR_MPE (1 << 3) +#define MXC_CCM_CCMR_PRCS_OFFSET 1 +#define MXC_CCM_CCMR_PRCS_MASK (0x3 << 1) + +#define MXC_CCM_PDR0_CSI_PODF_OFFSET 26 +#define MXC_CCM_PDR0_CSI_PODF_MASK (0x3F << 26) +#define MXC_CCM_PDR0_CSI_PRDF_OFFSET 23 +#define MXC_CCM_PDR0_CSI_PRDF_MASK (0x7 << 23) +#define MXC_CCM_PDR0_PER_PODF_OFFSET 16 +#define MXC_CCM_PDR0_PER_PODF_MASK (0x1F << 16) +#define MXC_CCM_PDR0_HSP_PODF_OFFSET 11 +#define MXC_CCM_PDR0_HSP_PODF_MASK (0x7 << 11) +#define MXC_CCM_PDR0_NFC_PODF_OFFSET 8 +#define MXC_CCM_PDR0_NFC_PODF_MASK (0x7 << 8) +#define MXC_CCM_PDR0_IPG_PODF_OFFSET 6 +#define MXC_CCM_PDR0_IPG_PODF_MASK (0x3 << 6) +#define MXC_CCM_PDR0_MAX_PODF_OFFSET 3 +#define MXC_CCM_PDR0_MAX_PODF_MASK (0x7 << 3) +#define MXC_CCM_PDR0_MCU_PODF_OFFSET 0 +#define MXC_CCM_PDR0_MCU_PODF_MASK 0x7 + +#define MXC_CCM_PDR0_HSP_DIV_1 (0x0 << 11) +#define MXC_CCM_PDR0_HSP_DIV_2 (0x1 << 11) +#define MXC_CCM_PDR0_HSP_DIV_3 (0x2 << 11) +#define MXC_CCM_PDR0_HSP_DIV_4 (0x3 << 11) +#define MXC_CCM_PDR0_HSP_DIV_5 (0x4 << 11) +#define MXC_CCM_PDR0_HSP_DIV_6 (0x5 << 11) +#define MXC_CCM_PDR0_HSP_DIV_7 (0x6 << 11) +#define MXC_CCM_PDR0_HSP_DIV_8 (0x7 << 11) + +#define MXC_CCM_PDR0_IPG_DIV_1 (0x0 << 6) +#define MXC_CCM_PDR0_IPG_DIV_2 (0x1 << 6) +#define MXC_CCM_PDR0_IPG_DIV_3 (0x2 << 6) +#define MXC_CCM_PDR0_IPG_DIV_4 (0x3 << 6) + +#define MXC_CCM_PDR0_MAX_DIV_1 (0x0 << 3) +#define MXC_CCM_PDR0_MAX_DIV_2 (0x1 << 3) +#define MXC_CCM_PDR0_MAX_DIV_3 (0x2 << 3) +#define MXC_CCM_PDR0_MAX_DIV_4 (0x3 << 3) +#define MXC_CCM_PDR0_MAX_DIV_5 (0x4 << 3) +#define MXC_CCM_PDR0_MAX_DIV_6 (0x5 << 3) +#define MXC_CCM_PDR0_MAX_DIV_7 (0x6 << 3) +#define MXC_CCM_PDR0_MAX_DIV_8 (0x7 << 3) + +#define MXC_CCM_PDR0_NFC_DIV_1 (0x0 << 8) +#define MXC_CCM_PDR0_NFC_DIV_2 (0x1 << 8) +#define MXC_CCM_PDR0_NFC_DIV_3 (0x2 << 8) +#define MXC_CCM_PDR0_NFC_DIV_4 (0x3 << 8) +#define MXC_CCM_PDR0_NFC_DIV_5 (0x4 << 8) +#define MXC_CCM_PDR0_NFC_DIV_6 (0x5 << 8) +#define MXC_CCM_PDR0_NFC_DIV_7 (0x6 << 8) +#define MXC_CCM_PDR0_NFC_DIV_8 (0x7 << 8) + +#define MXC_CCM_PDR0_MCU_DIV_1 0x0 +#define MXC_CCM_PDR0_MCU_DIV_2 0x1 +#define MXC_CCM_PDR0_MCU_DIV_3 0x2 +#define MXC_CCM_PDR0_MCU_DIV_4 0x3 +#define MXC_CCM_PDR0_MCU_DIV_5 0x4 +#define MXC_CCM_PDR0_MCU_DIV_6 0x5 +#define MXC_CCM_PDR0_MCU_DIV_7 0x6 +#define MXC_CCM_PDR0_MCU_DIV_8 0x7 + +#define MXC_CCM_PDR1_USB_PRDF_OFFSET 30 +#define MXC_CCM_PDR1_USB_PRDF_MASK (0x3 << 30) +#define MXC_CCM_PDR1_USB_PODF_OFFSET 27 +#define MXC_CCM_PDR1_USB_PODF_MASK (0x7 << 27) +#define MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET 24 +#define MXC_CCM_PDR1_FIRI_PRE_PODF_MASK (0x7 << 24) +#define MXC_CCM_PDR1_FIRI_PODF_OFFSET 18 +#define MXC_CCM_PDR1_FIRI_PODF_MASK (0x3F << 18) +#define MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET 15 +#define MXC_CCM_PDR1_SSI2_PRE_PODF_MASK (0x7 << 15) +#define MXC_CCM_PDR1_SSI2_PODF_OFFSET 9 +#define MXC_CCM_PDR1_SSI2_PODF_MASK (0x3F << 9) +#define MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET 6 +#define MXC_CCM_PDR1_SSI1_PRE_PODF_MASK (0x7 << 6) +#define MXC_CCM_PDR1_SSI1_PODF_OFFSET 0 +#define MXC_CCM_PDR1_SSI1_PODF_MASK 0x3F + +/* Bit definitions for RCSR */ +#define MXC_CCM_RCSR_NF16B 0x80000000 + +/* Bit definitions for both MCU, USB and SR PLL control registers */ +#define MXC_CCM_PCTL_BRM 0x80000000 +#define MXC_CCM_PCTL_PD_OFFSET 26 +#define MXC_CCM_PCTL_PD_MASK (0xF << 26) +#define MXC_CCM_PCTL_MFD_OFFSET 16 +#define MXC_CCM_PCTL_MFD_MASK (0x3FF << 16) +#define MXC_CCM_PCTL_MFI_OFFSET 10 +#define MXC_CCM_PCTL_MFI_MASK (0xF << 10) +#define MXC_CCM_PCTL_MFN_OFFSET 0 +#define MXC_CCM_PCTL_MFN_MASK 0x3FF + +#define MXC_CCM_CGR0_SD_MMC1_OFFSET 0 +#define MXC_CCM_CGR0_SD_MMC1_MASK (0x3 << 0) +#define MXC_CCM_CGR0_SD_MMC2_OFFSET 2 +#define MXC_CCM_CGR0_SD_MMC2_MASK (0x3 << 2) +#define MXC_CCM_CGR0_GPT_OFFSET 4 +#define MXC_CCM_CGR0_GPT_MASK (0x3 << 4) +#define MXC_CCM_CGR0_EPIT1_OFFSET 6 +#define MXC_CCM_CGR0_EPIT1_MASK (0x3 << 6) +#define MXC_CCM_CGR0_EPIT2_OFFSET 8 +#define MXC_CCM_CGR0_EPIT2_MASK (0x3 << 8) +#define MXC_CCM_CGR0_IIM_OFFSET 10 +#define MXC_CCM_CGR0_IIM_MASK (0x3 << 10) +#define MXC_CCM_CGR0_ATA_OFFSET 12 +#define MXC_CCM_CGR0_ATA_MASK (0x3 << 12) +#define MXC_CCM_CGR0_SDMA_OFFSET 14 +#define MXC_CCM_CGR0_SDMA_MASK (0x3 << 14) +#define MXC_CCM_CGR0_CSPI3_OFFSET 16 +#define MXC_CCM_CGR0_CSPI3_MASK (0x3 << 16) +#define MXC_CCM_CGR0_RNG_OFFSET 18 +#define MXC_CCM_CGR0_RNG_MASK (0x3 << 18) +#define MXC_CCM_CGR0_UART1_OFFSET 20 +#define MXC_CCM_CGR0_UART1_MASK (0x3 << 20) +#define MXC_CCM_CGR0_UART2_OFFSET 22 +#define MXC_CCM_CGR0_UART2_MASK (0x3 << 22) +#define MXC_CCM_CGR0_SSI1_OFFSET 24 +#define MXC_CCM_CGR0_SSI1_MASK (0x3 << 24) +#define MXC_CCM_CGR0_I2C1_OFFSET 26 +#define MXC_CCM_CGR0_I2C1_MASK (0x3 << 26) +#define MXC_CCM_CGR0_I2C2_OFFSET 28 +#define MXC_CCM_CGR0_I2C2_MASK (0x3 << 28) +#define MXC_CCM_CGR0_I2C3_OFFSET 30 +#define MXC_CCM_CGR0_I2C3_MASK (0x3 << 30) + +#define MXC_CCM_CGR1_HANTRO_OFFSET 0 +#define MXC_CCM_CGR1_HANTRO_MASK (0x3 << 0) +#define MXC_CCM_CGR1_MEMSTICK1_OFFSET 2 +#define MXC_CCM_CGR1_MEMSTICK1_MASK (0x3 << 2) +#define MXC_CCM_CGR1_MEMSTICK2_OFFSET 4 +#define MXC_CCM_CGR1_MEMSTICK2_MASK (0x3 << 4) +#define MXC_CCM_CGR1_CSI_OFFSET 6 +#define MXC_CCM_CGR1_CSI_MASK (0x3 << 6) +#define MXC_CCM_CGR1_RTC_OFFSET 8 +#define MXC_CCM_CGR1_RTC_MASK (0x3 << 8) +#define MXC_CCM_CGR1_WDOG_OFFSET 10 +#define MXC_CCM_CGR1_WDOG_MASK (0x3 << 10) +#define MXC_CCM_CGR1_PWM_OFFSET 12 +#define MXC_CCM_CGR1_PWM_MASK (0x3 << 12) +#define MXC_CCM_CGR1_SIM_OFFSET 14 +#define MXC_CCM_CGR1_SIM_MASK (0x3 << 14) +#define MXC_CCM_CGR1_ECT_OFFSET 16 +#define MXC_CCM_CGR1_ECT_MASK (0x3 << 16) +#define MXC_CCM_CGR1_USBOTG_OFFSET 18 +#define MXC_CCM_CGR1_USBOTG_MASK (0x3 << 18) +#define MXC_CCM_CGR1_KPP_OFFSET 20 +#define MXC_CCM_CGR1_KPP_MASK (0x3 << 20) +#define MXC_CCM_CGR1_IPU_OFFSET 22 +#define MXC_CCM_CGR1_IPU_MASK (0x3 << 22) +#define MXC_CCM_CGR1_UART3_OFFSET 24 +#define MXC_CCM_CGR1_UART3_MASK (0x3 << 24) +#define MXC_CCM_CGR1_UART4_OFFSET 26 +#define MXC_CCM_CGR1_UART4_MASK (0x3 << 26) +#define MXC_CCM_CGR1_UART5_OFFSET 28 +#define MXC_CCM_CGR1_UART5_MASK (0x3 << 28) +#define MXC_CCM_CGR1_OWIRE_OFFSET 30 +#define MXC_CCM_CGR1_OWIRE_MASK (0x3 << 30) + +#define MXC_CCM_CGR2_SSI2_OFFSET 0 +#define MXC_CCM_CGR2_SSI2_MASK (0x3 << 0) +#define MXC_CCM_CGR2_CSPI1_OFFSET 2 +#define MXC_CCM_CGR2_CSPI1_MASK (0x3 << 2) +#define MXC_CCM_CGR2_CSPI2_OFFSET 4 +#define MXC_CCM_CGR2_CSPI2_MASK (0x3 << 4) +#define MXC_CCM_CGR2_GACC_OFFSET 6 +#define MXC_CCM_CGR2_GACC_MASK (0x3 << 6) +#define MXC_CCM_CGR2_EMI_OFFSET 8 +#define MXC_CCM_CGR2_EMI_MASK (0x3 << 8) +#define MXC_CCM_CGR2_RTIC_OFFSET 10 +#define MXC_CCM_CGR2_RTIC_MASK (0x3 << 10) +#define MXC_CCM_CGR2_FIRI_OFFSET 12 +#define MXC_CCM_CGR2_FIRI_MASK (0x3 << 12) +#define MXC_CCM_CGR2_IPMUX1_OFFSET 14 +#define MXC_CCM_CGR2_IPMUX1_MASK (0x3 << 14) +#define MXC_CCM_CGR2_IPMUX2_OFFSET 16 +#define MXC_CCM_CGR2_IPMUX2_MASK (0x3 << 16) + +/* These new CGR2 bits are added in MX32 */ +#define MXC_CCM_CGR2_APMSYSCLKSEL_OFFSET 18 +#define MXC_CCM_CGR2_APMSYSCLKSEL_MASK (0x3 << 18) +#define MXC_CCM_CGR2_APMSSICLKSEL_OFFSET 20 +#define MXC_CCM_CGR2_APMSSICLKSEL_MASK (0x3 << 20) +#define MXC_CCM_CGR2_APMPERCLKSEL_OFFSET 22 +#define MXC_CCM_CGR2_APMPERCLKSEL_MASK (0x3 << 22) +#define MXC_CCM_CGR2_MXCCLKENSEL_OFFSET 24 +#define MXC_CCM_CGR2_MXCCLKENSEL_MASK (0x1 << 24) +#define MXC_CCM_CGR2_CHIKCAMPEN_OFFSET 25 +#define MXC_CCM_CGR2_CHIKCAMPEN_MASK (0x1 << 25) +#define MXC_CCM_CGR2_OVRVPUBUSY_OFFSET 26 +#define MXC_CCM_CGR2_OVRVPUBUSY_MASK (0x1 << 26) +#define MXC_CCM_CGR2_APMENA_OFFSET 30 +#define MXC_CCM_CGR2_AOMENA_MASK (0x1 << 30) + +/* + * LTR0 register offsets + */ +#define MXC_CCM_LTR0_DIV3CK_OFFSET 1 +#define MXC_CCM_LTR0_DIV3CK_MASK (0x3 << 1) +#define MXC_CCM_LTR0_DNTHR_OFFSET 16 +#define MXC_CCM_LTR0_DNTHR_MASK (0x3F << 16) +#define MXC_CCM_LTR0_UPTHR_OFFSET 22 +#define MXC_CCM_LTR0_UPTHR_MASK (0x3F << 22) + +/* + * LTR1 register offsets + */ +#define MXC_CCM_LTR1_PNCTHR_OFFSET 0 +#define MXC_CCM_LTR1_PNCTHR_MASK 0x3F +#define MXC_CCM_LTR1_UPCNT_OFFSET 6 +#define MXC_CCM_LTR1_UPCNT_MASK (0xFF << 6) +#define MXC_CCM_LTR1_DNCNT_OFFSET 14 +#define MXC_CCM_LTR1_DNCNT_MASK (0xFF << 14) +#define MXC_CCM_LTR1_LTBRSR_MASK 0x400000 +#define MXC_CCM_LTR1_LTBRSR_OFFSET 22 +#define MXC_CCM_LTR1_LTBRSR 0x400000 +#define MXC_CCM_LTR1_LTBRSH 0x800000 + +/* + * LTR2 bit definitions. x ranges from 0 for WSW9 to 6 for WSW15 + */ +#define MXC_CCM_LTR2_WSW_OFFSET(x) (11 + (x) * 3) +#define MXC_CCM_LTR2_WSW_MASK(x) (0x7 << \ + MXC_CCM_LTR2_WSW_OFFSET((x))) +#define MXC_CCM_LTR2_EMAC_OFFSET 0 +#define MXC_CCM_LTR2_EMAC_MASK 0x1FF + +/* + * LTR3 bit definitions. x ranges from 0 for WSW0 to 8 for WSW8 + */ +#define MXC_CCM_LTR3_WSW_OFFSET(x) (5 + (x) * 3) +#define MXC_CCM_LTR3_WSW_MASK(x) (0x7 << \ + MXC_CCM_LTR3_WSW_OFFSET((x))) + +#define MXC_CCM_PMCR0_DFSUP1 0x80000000 +#define MXC_CCM_PMCR0_DFSUP1_SPLL (0 << 31) +#define MXC_CCM_PMCR0_DFSUP1_MPLL (1 << 31) +#define MXC_CCM_PMCR0_DFSUP0 0x40000000 +#define MXC_CCM_PMCR0_DFSUP0_PLL (0 << 30) +#define MXC_CCM_PMCR0_DFSUP0_PDR (1 << 30) +#define MXC_CCM_PMCR0_DFSUP_MASK (0x3 << 30) + +#define DVSUP_TURBO 0 +#define DVSUP_HIGH 1 +#define DVSUP_MEDIUM 2 +#define DVSUP_LOW 3 +#define MXC_CCM_PMCR0_DVSUP_TURBO (DVSUP_TURBO << 28) +#define MXC_CCM_PMCR0_DVSUP_HIGH (DVSUP_HIGH << 28) +#define MXC_CCM_PMCR0_DVSUP_MEDIUM (DVSUP_MEDIUM << 28) +#define MXC_CCM_PMCR0_DVSUP_LOW (DVSUP_LOW << 28) +#define MXC_CCM_PMCR0_DVSUP_OFFSET 28 +#define MXC_CCM_PMCR0_DVSUP_MASK (0x3 << 28) +#define MXC_CCM_PMCR0_UDSC 0x08000000 +#define MXC_CCM_PMCR0_UDSC_MASK (1 << 27) +#define MXC_CCM_PMCR0_UDSC_UP (1 << 27) +#define MXC_CCM_PMCR0_UDSC_DOWN (0 << 27) + +#define MXC_CCM_PMCR0_VSCNT_1 (0x0 << 24) +#define MXC_CCM_PMCR0_VSCNT_2 (0x1 << 24) +#define MXC_CCM_PMCR0_VSCNT_3 (0x2 << 24) +#define MXC_CCM_PMCR0_VSCNT_4 (0x3 << 24) +#define MXC_CCM_PMCR0_VSCNT_5 (0x4 << 24) +#define MXC_CCM_PMCR0_VSCNT_6 (0x5 << 24) +#define MXC_CCM_PMCR0_VSCNT_7 (0x6 << 24) +#define MXC_CCM_PMCR0_VSCNT_8 (0x7 << 24) +#define MXC_CCM_PMCR0_VSCNT_OFFSET 24 +#define MXC_CCM_PMCR0_VSCNT_MASK (0x7 << 24) +#define MXC_CCM_PMCR0_DVFEV 0x00800000 +#define MXC_CCM_PMCR0_DVFIS 0x00400000 +#define MXC_CCM_PMCR0_LBMI 0x00200000 +#define MXC_CCM_PMCR0_LBFL 0x00100000 +#define MXC_CCM_PMCR0_LBCF_4 (0x0 << 18) +#define MXC_CCM_PMCR0_LBCF_8 (0x1 << 18) +#define MXC_CCM_PMCR0_LBCF_12 (0x2 << 18) +#define MXC_CCM_PMCR0_LBCF_16 (0x3 << 18) +#define MXC_CCM_PMCR0_LBCF_OFFSET 18 +#define MXC_CCM_PMCR0_LBCF_MASK (0x3 << 18) +#define MXC_CCM_PMCR0_PTVIS 0x00020000 +#define MXC_CCM_PMCR0_UPDTEN 0x00010000 +#define MXC_CCM_PMCR0_UPDTEN_MASK (0x1 << 16) +#define MXC_CCM_PMCR0_FSVAIM 0x00008000 +#define MXC_CCM_PMCR0_FSVAI_OFFSET 13 +#define MXC_CCM_PMCR0_FSVAI_MASK (0x3 << 13) +#define MXC_CCM_PMCR0_DPVCR 0x00001000 +#define MXC_CCM_PMCR0_DPVV 0x00000800 +#define MXC_CCM_PMCR0_WFIM 0x00000400 +#define MXC_CCM_PMCR0_DRCE3 0x00000200 +#define MXC_CCM_PMCR0_DRCE2 0x00000100 +#define MXC_CCM_PMCR0_DRCE1 0x00000080 +#define MXC_CCM_PMCR0_DRCE0 0x00000040 +#define MXC_CCM_PMCR0_DCR 0x00000020 +#define MXC_CCM_PMCR0_DVFEN 0x00000010 +#define MXC_CCM_PMCR0_PTVAIM 0x00000008 +#define MXC_CCM_PMCR0_PTVAI_OFFSET 1 +#define MXC_CCM_PMCR0_PTVAI_MASK (0x3 << 1) +#define MXC_CCM_PMCR0_DPTEN 0x00000001 + +#define MXC_CCM_PMCR1_DVGP_OFFSET 0 +#define MXC_CCM_PMCR1_DVGP_MASK (0xF) + +#define MXC_CCM_PMCR1_PLLRDIS (0x1 << 7) +#define MXC_CCM_PMCR1_EMIRQ_EN (0x1 << 8) + +#define MXC_CCM_DCVR_ULV_MASK (0x3FF << 22) +#define MXC_CCM_DCVR_ULV_OFFSET 22 +#define MXC_CCM_DCVR_LLV_MASK (0x3FF << 12) +#define MXC_CCM_DCVR_LLV_OFFSET 12 +#define MXC_CCM_DCVR_ELV_MASK (0x3FF << 2) +#define MXC_CCM_DCVR_ELV_OFFSET 2 + +#define MXC_CCM_PDR2_MST2_PDF_MASK (0x3F << 7) +#define MXC_CCM_PDR2_MST2_PDF_OFFSET 7 +#define MXC_CCM_PDR2_MST1_PDF_MASK 0x3F +#define MXC_CCM_PDR2_MST1_PDF_OFFSET 0 + +#define MXC_CCM_COSR_CLKOSEL_MASK 0x0F +#define MXC_CCM_COSR_CLKOSEL_OFFSET 0 +#define MXC_CCM_COSR_CLKOUTDIV_MASK (0x07 << 6) +#define MXC_CCM_COSR_CLKOUTDIV_OFFSET 6 +#define MXC_CCM_COSR_CLKOEN (1 << 9) + +/* + * PMCR0 register offsets + */ +#define MXC_CCM_PMCR0_LBFL_OFFSET 20 +#define MXC_CCM_PMCR0_DFSUP0_OFFSET 30 +#define MXC_CCM_PMCR0_DFSUP1_OFFSET 31 + +#endif /* __ARCH_ARM_MACH_MX3_CRM_REGS_H__ */ diff --git a/include/asm-arm/arch-mxc/common.h b/include/asm-arm/arch-mxc/common.h index 23b4350edbd6..c6d4aa360635 100644 --- a/include/asm-arm/arch-mxc/common.h +++ b/include/asm-arm/arch-mxc/common.h @@ -16,5 +16,6 @@ struct sys_timer; extern void mxc_map_io(void); extern void mxc_init_irq(void); extern struct sys_timer mxc_timer; +extern int mxc_clocks_init(unsigned long fref); #endif -- cgit v1.2.3 From e3d13ff4b9d3b05d7a969153e2c049548e25deea Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:48 +0200 Subject: mxc: add MX3 support for i.MX internal UART driver This patch adds MX3 support for the i.MX internal uart driver. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/Makefile | 2 +- arch/arm/mach-mx3/devices.c | 153 ++++++++++++++++++++++++++++++++++++ drivers/serial/Kconfig | 2 +- drivers/serial/imx.c | 100 ++++++++++++++++++----- include/asm-arm/arch-mxc/imx-uart.h | 32 ++++++++ 5 files changed, 267 insertions(+), 22 deletions(-) create mode 100644 arch/arm/mach-mx3/devices.c create mode 100644 include/asm-arm/arch-mxc/imx-uart.h diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index febb37f23935..a788cb0b793e 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -4,5 +4,5 @@ # Object file lists. -obj-y := mm.o time.o clock.o +obj-y := mm.o time.o clock.o devices.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c new file mode 100644 index 000000000000..1bc6d23a1d58 --- /dev/null +++ b/arch/arm/mach-mx3/devices.c @@ -0,0 +1,153 @@ +/* + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Sascha Hauer, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +static struct resource uart0[] = { + { + .start = UART1_BASE_ADDR, + .end = UART1_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART1, + .end = MXC_INT_UART1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device0 = { + .name = "imx-uart", + .id = 0, + .resource = uart0, + .num_resources = ARRAY_SIZE(uart0), +}; + +static struct resource uart1[] = { + { + .start = UART2_BASE_ADDR, + .end = UART2_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART2, + .end = MXC_INT_UART2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device1 = { + .name = "imx-uart", + .id = 1, + .resource = uart1, + .num_resources = ARRAY_SIZE(uart1), +}; + +static struct resource uart2[] = { + { + .start = UART3_BASE_ADDR, + .end = UART3_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART3, + .end = MXC_INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device2 = { + .name = "imx-uart", + .id = 2, + .resource = uart2, + .num_resources = ARRAY_SIZE(uart2), +}; + +static struct resource uart3[] = { + { + .start = UART4_BASE_ADDR, + .end = UART4_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART4, + .end = MXC_INT_UART4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device3 = { + .name = "imx-uart", + .id = 3, + .resource = uart3, + .num_resources = ARRAY_SIZE(uart3), +}; + +static struct resource uart4[] = { + { + .start = UART5_BASE_ADDR, + .end = UART5_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART5, + .end = MXC_INT_UART5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device4 = { + .name = "imx-uart", + .id = 4, + .resource = uart4, + .num_resources = ARRAY_SIZE(uart4), +}; + +/* + * Register only those UARTs that physically exist + */ +int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata) +{ + switch (uart_no) { + case 0: + mxc_uart_device0.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device0); + break; + case 1: + mxc_uart_device1.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device1); + break; + case 2: + mxc_uart_device2.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device2); + break; + case 3: + mxc_uart_device3.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device3); + break; + case 4: + mxc_uart_device4.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device4); + break; + default: + return -ENODEV; + } + + return 0; +} + diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 9bc42763623c..0843c5400684 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -753,7 +753,7 @@ config BFIN_UART3_CTSRTS config SERIAL_IMX bool "IMX serial port support" - depends on ARM && ARCH_IMX + depends on ARM && (ARCH_IMX || ARCH_MXC) select SERIAL_CORE help If you have a machine based on a Motorola IMX CPU you diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 9e2162ebf1bb..549440b098b2 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -62,6 +62,11 @@ #define UBIR 0xa4 /* BRM Incremental Register */ #define UBMR 0xa8 /* BRM Modulator Register */ #define UBRC 0xac /* Baud Rate Count Register */ +#ifdef CONFIG_ARCH_MX3 +#define ONEMS 0xb0 /* One Millisecond register */ +#define UTS 0xb4 /* UART Test Register */ +#endif +#ifdef CONFIG_ARCH_IMX #define BIPR1 0xb0 /* Incremental Preset Register 1 */ #define BIPR2 0xb4 /* Incremental Preset Register 2 */ #define BIPR3 0xb8 /* Incremental Preset Register 3 */ @@ -71,6 +76,7 @@ #define BMPR3 0xc8 /* BRM Modulator Register 3 */ #define BMPR4 0xcc /* BRM Modulator Register 4 */ #define UTS 0xd0 /* UART Test Register */ +#endif /* UART Control Register Bit Fields.*/ #define URXD_CHARRDY (1<<15) @@ -90,7 +96,12 @@ #define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ #define UCR1_SNDBRK (1<<4) /* Send break */ #define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ +#ifdef CONFIG_ARCH_IMX #define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ +#endif +#ifdef CONFIG_ARCH_MX3 +#define UCR1_UARTCLKEN (0) /* not present on mx2/mx3 */ +#endif #define UCR1_DOZE (1<<1) /* Doze */ #define UCR1_UARTEN (1<<0) /* UART enabled */ #define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ @@ -164,8 +175,19 @@ #define UTS_SOFTRST (1<<0) /* Software reset */ /* We've been assigned a range on the "Low-density serial ports" major */ +#ifdef CONFIG_ARCH_IMX #define SERIAL_IMX_MAJOR 204 #define MINOR_START 41 +#define DEV_NAME "ttySMX" +#define MAX_INTERNAL_IRQ IMX_IRQS +#endif + +#ifdef CONFIG_ARCH_MX3 +#define SERIAL_IMX_MAJOR 207 +#define MINOR_START 16 +#define DEV_NAME "ttymxc" +#define MAX_INTERNAL_IRQ MXC_MAX_INT_LINES +#endif /* * This determines how often we check the modem status signals @@ -409,6 +431,26 @@ out: return IRQ_HANDLED; } +static irqreturn_t imx_int(int irq, void *dev_id) +{ + struct imx_port *sport = dev_id; + unsigned int sts; + + sts = readl(sport->port.membase + USR1); + + if (sts & USR1_RRDY) + imx_rxint(irq, dev_id); + + if (sts & USR1_TRDY && + readl(sport->port.membase + UCR1) & UCR1_TXMPTYEN) + imx_txint(irq, dev_id); + + if (sts & USR1_RTSS) + imx_rtsint(irq, dev_id); + + return IRQ_HANDLED; +} + /* * Return TIOCSER_TEMT when transmitter is not busy. */ @@ -514,21 +556,34 @@ static int imx_startup(struct uart_port *port) writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); /* - * Allocate the IRQ + * Allocate the IRQ(s) i.MX1 has three interrupts whereas later + * chips only have one interrupt. */ - retval = request_irq(sport->rxirq, imx_rxint, 0, - DRIVER_NAME, sport); - if (retval) goto error_out1; - - retval = request_irq(sport->txirq, imx_txint, 0, - DRIVER_NAME, sport); - if (retval) goto error_out2; - - retval = request_irq(sport->rtsirq, imx_rtsint, - (sport->rtsirq < IMX_IRQS) ? 0 : + if (sport->txirq > 0) { + retval = request_irq(sport->rxirq, imx_rxint, 0, + DRIVER_NAME, sport); + if (retval) + goto error_out1; + + retval = request_irq(sport->txirq, imx_txint, 0, + DRIVER_NAME, sport); + if (retval) + goto error_out2; + + retval = request_irq(sport->rtsirq, imx_rtsint, + (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 : IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, - DRIVER_NAME, sport); - if (retval) goto error_out3; + DRIVER_NAME, sport); + if (retval) + goto error_out3; + } else { + retval = request_irq(sport->port.irq, imx_int, 0, + DRIVER_NAME, sport); + if (retval) { + free_irq(sport->port.irq, sport); + goto error_out1; + } + } /* * Finally, clear and enable interrupts @@ -553,9 +608,11 @@ static int imx_startup(struct uart_port *port) return 0; error_out3: - free_irq(sport->txirq, sport); + if (sport->txirq) + free_irq(sport->txirq, sport); error_out2: - free_irq(sport->rxirq, sport); + if (sport->rxirq) + free_irq(sport->rxirq, sport); error_out1: return retval; } @@ -573,9 +630,12 @@ static void imx_shutdown(struct uart_port *port) /* * Free the interrupts */ - free_irq(sport->rtsirq, sport); - free_irq(sport->txirq, sport); - free_irq(sport->rxirq, sport); + if (sport->txirq > 0) { + free_irq(sport->rtsirq, sport); + free_irq(sport->txirq, sport); + free_irq(sport->rxirq, sport); + } else + free_irq(sport->port.irq, sport); /* * Disable all interrupts, port and break condition. @@ -973,7 +1033,7 @@ imx_console_setup(struct console *co, char *options) static struct uart_driver imx_reg; static struct console imx_console = { - .name = "ttySMX", + .name = DEV_NAME, .write = imx_console_write, .device = uart_console_device, .setup = imx_console_setup, @@ -990,7 +1050,7 @@ static struct console imx_console = { static struct uart_driver imx_reg = { .owner = THIS_MODULE, .driver_name = DRIVER_NAME, - .dev_name = "ttySMX", + .dev_name = DEV_NAME, .major = SERIAL_IMX_MAJOR, .minor = MINOR_START, .nr = ARRAY_SIZE(imx_ports), diff --git a/include/asm-arm/arch-mxc/imx-uart.h b/include/asm-arm/arch-mxc/imx-uart.h new file mode 100644 index 000000000000..83fb72c4048a --- /dev/null +++ b/include/asm-arm/arch-mxc/imx-uart.h @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2008 by Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef ASMARM_ARCH_UART_H +#define ASMARM_ARCH_UART_H + +#define IMXUART_HAVE_RTSCTS (1<<0) + +struct imxuart_platform_data { + int (*init)(struct platform_device *pdev); + int (*exit)(struct platform_device *pdev); + unsigned int flags; +}; + +int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata); + +#endif -- cgit v1.2.3 From 07bd1a6cc7cbb3f373fbe49b204c6cde5e9155fc Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:49 +0200 Subject: MXC arch: Add gpio support for the whole platform This patch bases on the one from Daniel Mack. The most important change to Daniel's patch is to be more generic. This gpio routine supports at least the i.MX27 and i.MX31 processors. Signed-off-by: Juergen Beisert Acked-by: Daniel Mack --- arch/arm/Kconfig | 2 + arch/arm/mach-mx3/devices.c | 27 ++++ arch/arm/plat-mxc/Makefile | 2 +- arch/arm/plat-mxc/gpio.c | 253 ++++++++++++++++++++++++++++++++++++++ arch/arm/plat-mxc/irq.c | 3 + include/asm-arm/arch-mxc/common.h | 1 + include/asm-arm/arch-mxc/gpio.h | 42 +++++++ include/asm-arm/arch-mxc/mx31.h | 19 +++ 8 files changed, 348 insertions(+), 1 deletion(-) create mode 100644 arch/arm/plat-mxc/gpio.c create mode 100644 include/asm-arm/arch-mxc/gpio.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b786e68914d4..5c8c1a89be73 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -368,6 +368,8 @@ config ARCH_NS9XXX config ARCH_MXC bool "Freescale MXC/iMX-based" select ARCH_MTD_XIP + select GENERIC_GPIO + select HAVE_GPIO_LIB help Support for Freescale MXC/iMX-based family of processors diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 1bc6d23a1d58..5c0320fce5b6 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -151,3 +152,29 @@ int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata) return 0; } +/* GPIO port description */ +static struct mxc_gpio_port imx_gpio_ports[] = { + [0] = { + .chip.label = "gpio-0", + .base = IO_ADDRESS(GPIO1_BASE_ADDR), + .irq = MXC_INT_GPIO1, + .virtual_irq_start = MXC_GPIO_INT_BASE + }, + [1] = { + .chip.label = "gpio-1", + .base = IO_ADDRESS(GPIO2_BASE_ADDR), + .irq = MXC_INT_GPIO2, + .virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN + }, + [2] = { + .chip.label = "gpio-2", + .base = IO_ADDRESS(GPIO3_BASE_ADDR), + .irq = MXC_INT_GPIO3, + .virtual_irq_start = MXC_GPIO_INT_BASE + GPIO_NUM_PIN * 2 + } +}; + +int __init mxc_register_gpios(void) +{ + return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); +} diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 3eb181cb7afb..66272a6fc323 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,4 +3,4 @@ # # Common support -obj-y := irq.o clock.o +obj-y := irq.o clock.o gpio.o diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c new file mode 100644 index 000000000000..4a7736717d86 --- /dev/null +++ b/arch/arm/plat-mxc/gpio.c @@ -0,0 +1,253 @@ +/* + * MXC GPIO support. (c) 2008 Daniel Mack + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * Based on code from Freescale, + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include + +static struct mxc_gpio_port *mxc_gpio_ports; +static int gpio_table_size; + +/* Note: This driver assumes 32 GPIOs are handled in one register */ + +static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index) +{ + __raw_writel(1 << index, port->base + GPIO_ISR); +} + +static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index, + int enable) +{ + u32 l; + + l = __raw_readl(port->base + GPIO_IMR); + l = (l & (~(1 << index))) | (!!enable << index); + __raw_writel(l, port->base + GPIO_IMR); +} + +static void gpio_ack_irq(u32 irq) +{ + u32 gpio = irq_to_gpio(irq); + _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f); +} + +static void gpio_mask_irq(u32 irq) +{ + u32 gpio = irq_to_gpio(irq); + _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0); +} + +static void gpio_unmask_irq(u32 irq) +{ + u32 gpio = irq_to_gpio(irq); + _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1); +} + +static int gpio_set_irq_type(u32 irq, u32 type) +{ + u32 gpio = irq_to_gpio(irq); + struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; + u32 bit, val; + int edge; + void __iomem *reg = port->base; + + switch (type) { + case IRQT_RISING: + edge = GPIO_INT_RISE_EDGE; + break; + case IRQT_FALLING: + edge = GPIO_INT_FALL_EDGE; + break; + case IRQT_LOW: + edge = GPIO_INT_LOW_LEV; + break; + case IRQT_HIGH: + edge = GPIO_INT_HIGH_LEV; + break; + default: /* this includes IRQT_BOTHEDGE */ + return -EINVAL; + } + + reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ + bit = gpio & 0xf; + val = __raw_readl(reg) & ~(0x3 << (bit << 1)); + __raw_writel(val | (edge << (bit << 1)), reg); + _clear_gpio_irqstatus(port, gpio & 0x1f); + + return 0; +} + +/* handle n interrupts in one status register */ +static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) +{ + u32 gpio_irq_no; + + gpio_irq_no = port->virtual_irq_start; + for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) { + + if ((irq_stat & 1) == 0) + continue; + + BUG_ON(!(irq_desc[gpio_irq_no].handle_irq)); + irq_desc[gpio_irq_no].handle_irq(gpio_irq_no, + &irq_desc[gpio_irq_no]); + } +} + +#ifdef CONFIG_ARCH_MX3 +/* MX3 has one interrupt *per* gpio port */ +static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) +{ + u32 irq_stat; + struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq); + + irq_stat = __raw_readl(port->base + GPIO_ISR) & + __raw_readl(port->base + GPIO_IMR); + BUG_ON(!irq_stat); + mxc_gpio_irq_handler(port, irq_stat); +} +#endif + +#ifdef CONFIG_ARCH_MX2 +/* MX2 has one interrupt *for all* gpio ports */ +static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) +{ + int i; + u32 irq_msk, irq_stat; + struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq); + + /* walk through all interrupt status registers */ + for (i = 0; i < gpio_table_size; i++) { + irq_msk = __raw_readl(port[i].base + GPIO_IMR); + if (!irq_msk) + continue; + + irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk; + if (irq_stat) + mxc_gpio_irq_handler(&port[i], irq_stat); + } +} +#endif + +static struct irq_chip gpio_irq_chip = { + .ack = gpio_ack_irq, + .mask = gpio_mask_irq, + .unmask = gpio_unmask_irq, + .set_type = gpio_set_irq_type, +}; + +static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, + int dir) +{ + struct mxc_gpio_port *port = + container_of(chip, struct mxc_gpio_port, chip); + u32 l; + + l = __raw_readl(port->base + GPIO_GDIR); + if (dir) + l |= 1 << offset; + else + l &= ~(1 << offset); + __raw_writel(l, port->base + GPIO_GDIR); +} + +static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct mxc_gpio_port *port = + container_of(chip, struct mxc_gpio_port, chip); + void __iomem *reg = port->base + GPIO_DR; + u32 l; + + l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset); + __raw_writel(l, reg); +} + +static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct mxc_gpio_port *port = + container_of(chip, struct mxc_gpio_port, chip); + + return (__raw_readl(port->base + GPIO_DR) >> offset) & 1; +} + +static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + _set_gpio_direction(chip, offset, 0); + return 0; +} + +static int mxc_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + _set_gpio_direction(chip, offset, 1); + mxc_gpio_set(chip, offset, value); + return 0; +} + +int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) +{ + int i, j; + + /* save for local usage */ + mxc_gpio_ports = port; + gpio_table_size = cnt; + + printk(KERN_INFO "MXC GPIO hardware\n"); + + for (i = 0; i < cnt; i++) { + /* disable the interrupt and clear the status */ + __raw_writel(0, port[i].base + GPIO_IMR); + __raw_writel(~0, port[i].base + GPIO_ISR); + for (j = port[i].virtual_irq_start; + j < port[i].virtual_irq_start + 32; j++) { + set_irq_chip(j, &gpio_irq_chip); + set_irq_handler(j, handle_edge_irq); + set_irq_flags(j, IRQF_VALID); + } + + /* register gpio chip */ + port[i].chip.direction_input = mxc_gpio_direction_input; + port[i].chip.direction_output = mxc_gpio_direction_output; + port[i].chip.get = mxc_gpio_get; + port[i].chip.set = mxc_gpio_set; + port[i].chip.base = i * 32; + port[i].chip.ngpio = 32; + + /* its a serious configuration bug when it fails */ + BUG_ON( gpiochip_add(&port[i].chip) < 0 ); + +#ifdef CONFIG_ARCH_MX3 + /* setup one handler for each entry */ + set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler); + set_irq_data(port[i].irq, &port[i]); +#endif + } + +#ifdef CONFIG_ARCH_MX2 + /* setup one handler for all GPIO interrupts */ + set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler); + set_irq_data(port[0].irq, port); +#endif + return 0; +} diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 2ad5a6917b3f..88f0cfababda 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -71,5 +71,8 @@ void __init mxc_init_irq(void) reg |= (0xF << 28); __raw_writel(reg, AVIC_NIPRIORITY6); + /* init architectures chained interrupt handler */ + mxc_register_gpios(); + printk(KERN_INFO "MXC IRQ initialized\n"); } diff --git a/include/asm-arm/arch-mxc/common.h b/include/asm-arm/arch-mxc/common.h index c6d4aa360635..8774783ed984 100644 --- a/include/asm-arm/arch-mxc/common.h +++ b/include/asm-arm/arch-mxc/common.h @@ -17,5 +17,6 @@ extern void mxc_map_io(void); extern void mxc_init_irq(void); extern struct sys_timer mxc_timer; extern int mxc_clocks_init(unsigned long fref); +extern int mxc_register_gpios(void); #endif diff --git a/include/asm-arm/arch-mxc/gpio.h b/include/asm-arm/arch-mxc/gpio.h new file mode 100644 index 000000000000..d393e15f5a6b --- /dev/null +++ b/include/asm-arm/arch-mxc/gpio.h @@ -0,0 +1,42 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_GPIO_H__ +#define __ASM_ARCH_MXC_GPIO_H__ + +#include +#include + +/* use gpiolib dispatchers */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep + +#define gpio_to_irq(gpio) (MXC_MAX_INT_LINES + (gpio)) +#define irq_to_gpio(irq) ((irq) - MXC_MAX_INT_LINES) + +struct mxc_gpio_port { + void __iomem *base; + int irq; + int virtual_irq_start; + struct gpio_chip chip; +}; + +int mxc_gpio_init(struct mxc_gpio_port*, int); + +#endif diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h index 36a1af495bb3..98e6a4cd1ea9 100644 --- a/include/asm-arm/arch-mxc/mx31.h +++ b/include/asm-arm/arch-mxc/mx31.h @@ -347,6 +347,25 @@ #define SYSTEM_REV_MIN CHIP_REV_1_0 #define SYSTEM_REV_NUM 3 +/* gpio and gpio based interrupt handling */ +#define GPIO_DR 0x00 +#define GPIO_GDIR 0x04 +#define GPIO_PSR 0x08 +#define GPIO_ICR1 0x0C +#define GPIO_ICR2 0x10 +#define GPIO_IMR 0x14 +#define GPIO_ISR 0x18 +#define GPIO_INT_LOW_LEV 0x0 +#define GPIO_INT_HIGH_LEV 0x1 +#define GPIO_INT_RISE_EDGE 0x2 +#define GPIO_INT_FALL_EDGE 0x3 +#define GPIO_INT_NONE 0x4 + +/* Mandatory defines used globally */ + +/* this CPU supports up to 96 GPIOs */ +#define ARCH_NR_GPIOS 96 + #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) /* this is a i.MX31 CPU */ -- cgit v1.2.3 From 90292ea60f1c730efb9fea02b2e12676da89ebef Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:50 +0200 Subject: MXC: add io multiplexing functions for mx3 This patch adds functions to use the io multiplexer on mx3 platforms. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/Makefile | 2 +- arch/arm/mach-mx3/iomux.c | 111 ++++++++ include/asm-arm/arch-mxc/iomux-mx3.h | 501 +++++++++++++++++++++++++++++++++++ 3 files changed, 613 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-mx3/iomux.c create mode 100644 include/asm-arm/arch-mxc/iomux-mx3.h diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index a788cb0b793e..68f062b70d33 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -4,5 +4,5 @@ # Object file lists. -obj-y := mm.o time.o clock.o devices.o +obj-y := mm.o time.o clock.o devices.o iomux.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c new file mode 100644 index 000000000000..adc51feefc1d --- /dev/null +++ b/arch/arm/mach-mx3/iomux.c @@ -0,0 +1,111 @@ +/* + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* + * IOMUX register (base) addresses + */ +#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR) +#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000) +#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004) +#define IOMUXGPR (IOMUX_BASE + 0x008) +#define IOMUXSW_MUX_CTL (IOMUX_BASE + 0x00C) +#define IOMUXSW_PAD_CTL (IOMUX_BASE + 0x154) + +static DEFINE_SPINLOCK(gpio_mux_lock); + +#define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3) +/* + * set the mode for a IOMUX pin. + */ +int mxc_iomux_mode(unsigned int pin_mode) +{ + u32 reg, field, l, mode, ret = 0; + + reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK); + field = pin_mode & 0x3; + mode = (pin_mode & IOMUX_MODE_MASK) >> IOMUX_MODE_SHIFT; + + pr_debug("%s: reg offset = 0x%x field = %d mode = 0x%02x\n", + __func__, (pin_mode & IOMUX_REG_MASK), field, mode); + + spin_lock(&gpio_mux_lock); + + l = __raw_readl(reg); + l &= ~(0xff << (field * 8)); + l |= mode << (field * 8); + __raw_writel(l, reg); + + spin_unlock(&gpio_mux_lock); + + return ret; +} +EXPORT_SYMBOL(mxc_iomux_mode); + +/* + * This function configures the pad value for a IOMUX pin. + */ +void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) +{ + u32 reg, field, l; + + reg = IOMUXSW_PAD_CTL + (pin + 2) / 3; + field = (pin + 2) % 3; + + pr_debug("%s: reg offset = 0x%x field = %d\n", + __func__, (pin + 2) / 3, field); + + spin_lock(&gpio_mux_lock); + + l = __raw_readl(reg); + l &= ~(0x1ff << (field * 9)); + l |= config << (field * 9); + __raw_writel(l, reg); + + spin_unlock(&gpio_mux_lock); +} +EXPORT_SYMBOL(mxc_iomux_set_pad); + +/* + * This function enables/disables the general purpose function for a particular + * signal. + */ +void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en) +{ + u32 l; + + spin_lock(&gpio_mux_lock); + l = __raw_readl(IOMUXGPR); + if (en) + l |= gp; + else + l &= ~gp; + + __raw_writel(l, IOMUXGPR); + spin_unlock(&gpio_mux_lock); +} +EXPORT_SYMBOL(mxc_iomux_set_gpr); + diff --git a/include/asm-arm/arch-mxc/iomux-mx3.h b/include/asm-arm/arch-mxc/iomux-mx3.h new file mode 100644 index 000000000000..7509e7692f08 --- /dev/null +++ b/include/asm-arm/arch-mxc/iomux-mx3.h @@ -0,0 +1,501 @@ +/* + * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2008 by Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __MACH_MX31_IOMUX_H__ +#define __MACH_MX31_IOMUX_H__ + +#include + +/* + * various IOMUX output functions + */ + +#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */ +#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */ +#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */ +#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */ +#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */ +#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */ +#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */ +#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */ +#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ +#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */ +#define IOMUX_ICONFIG_FUNC 2 /* used as function */ +#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */ +#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */ + +#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO) +#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC) +#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1) +#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2) + +/* + * various IOMUX pad functions + */ +enum iomux_pad_config { + PAD_CTL_NOLOOPBACK = 0x0 << 9, + PAD_CTL_LOOPBACK = 0x1 << 9, + PAD_CTL_PKE_NONE = 0x0 << 8, + PAD_CTL_PKE_ENABLE = 0x1 << 8, + PAD_CTL_PUE_KEEPER = 0x0 << 7, + PAD_CTL_PUE_PUD = 0x1 << 7, + PAD_CTL_100K_PD = 0x0 << 5, + PAD_CTL_100K_PU = 0x1 << 5, + PAD_CTL_47K_PU = 0x2 << 5, + PAD_CTL_22K_PU = 0x3 << 5, + PAD_CTL_HYS_CMOS = 0x0 << 4, + PAD_CTL_HYS_SCHMITZ = 0x1 << 4, + PAD_CTL_ODE_CMOS = 0x0 << 3, + PAD_CTL_ODE_OpenDrain = 0x1 << 3, + PAD_CTL_DRV_NORMAL = 0x0 << 1, + PAD_CTL_DRV_HIGH = 0x1 << 1, + PAD_CTL_DRV_MAX = 0x2 << 1, + PAD_CTL_SRE_SLOW = 0x0 << 0, + PAD_CTL_SRE_FAST = 0x1 << 0 +}; + +/* + * various IOMUX general purpose functions + */ +enum iomux_gp_func { + MUX_PGP_FIRI = 1 << 0, + MUX_DDR_MODE = 1 << 1, + MUX_PGP_CSPI_BB = 1 << 2, + MUX_PGP_ATA_1 = 1 << 3, + MUX_PGP_ATA_2 = 1 << 4, + MUX_PGP_ATA_3 = 1 << 5, + MUX_PGP_ATA_4 = 1 << 6, + MUX_PGP_ATA_5 = 1 << 7, + MUX_PGP_ATA_6 = 1 << 8, + MUX_PGP_ATA_7 = 1 << 9, + MUX_PGP_ATA_8 = 1 << 10, + MUX_PGP_UH2 = 1 << 11, + MUX_SDCTL_CSD0_SEL = 1 << 12, + MUX_SDCTL_CSD1_SEL = 1 << 13, + MUX_CSPI1_UART3 = 1 << 14, + MUX_EXTDMAREQ2_MBX_SEL = 1 << 15, + MUX_TAMPER_DETECT_EN = 1 << 16, + MUX_PGP_USB_4WIRE = 1 << 17, + MUX_PGB_USB_COMMON = 1 << 18, + MUX_SDHC_MEMSTICK1 = 1 << 19, + MUX_SDHC_MEMSTICK2 = 1 << 20, + MUX_PGP_SPLL_BYP = 1 << 21, + MUX_PGP_UPLL_BYP = 1 << 22, + MUX_PGP_MSHC1_CLK_SEL = 1 << 23, + MUX_PGP_MSHC2_CLK_SEL = 1 << 24, + MUX_CSPI3_UART5_SEL = 1 << 25, + MUX_PGP_ATA_9 = 1 << 26, + MUX_PGP_USB_SUSPEND = 1 << 27, + MUX_PGP_USB_OTG_LOOPBACK = 1 << 28, + MUX_PGP_USB_HS1_LOOPBACK = 1 << 29, + MUX_PGP_USB_HS2_LOOPBACK = 1 << 30, + MUX_CLKO_DDR_MODE = 1 << 31, +}; + +/* + * This function enables/disables the general purpose function for a particular + * signal. + */ +void iomux_config_gpr(enum iomux_gp_func , bool); + +/* + * set the mode for a IOMUX pin. + */ +int mxc_iomux_mode(unsigned int); + +/* + * This function enables/disables the general purpose function for a particular + * signal. + */ +void mxc_iomux_set_gpr(enum iomux_gp_func, bool); + +#define IOMUX_PADNUM_MASK 0x1ff +#define IOMUX_GPIONUM_SHIFT 9 +#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT) +#define IOMUX_MODE_SHIFT 17 +#define IOMUX_MODE_MASK (0xff << IOMUX_MODE_SHIFT) + +#define IOMUX_PIN(gpionum, padnum) \ + (((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \ + (padnum & IOMUX_PADNUM_MASK)) + +#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT) + +#define IOMUX_TO_GPIO(iomux_pin) \ + ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) +#define IOMUX_TO_IRQ(iomux_pin) \ + (((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \ + MXC_GPIO_INT_BASE) + +/* + * This enumeration is constructed based on the Section + * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated + * value is constructed based on the rules described above. + */ + +enum iomux_pins { + MX31_PIN_TTM_PAD = IOMUX_PIN(0xff, 0), + MX31_PIN_CSPI3_SPI_RDY = IOMUX_PIN(0xff, 1), + MX31_PIN_CSPI3_SCLK = IOMUX_PIN(0xff, 2), + MX31_PIN_CSPI3_MISO = IOMUX_PIN(0xff, 3), + MX31_PIN_CSPI3_MOSI = IOMUX_PIN(0xff, 4), + MX31_PIN_CLKSS = IOMUX_PIN(0xff, 5), + MX31_PIN_CE_CONTROL = IOMUX_PIN(0xff, 6), + MX31_PIN_ATA_RESET_B = IOMUX_PIN(95, 7), + MX31_PIN_ATA_DMACK = IOMUX_PIN(94, 8), + MX31_PIN_ATA_DIOW = IOMUX_PIN(93, 9), + MX31_PIN_ATA_DIOR = IOMUX_PIN(92, 10), + MX31_PIN_ATA_CS1 = IOMUX_PIN(91, 11), + MX31_PIN_ATA_CS0 = IOMUX_PIN(90, 12), + MX31_PIN_SD1_DATA3 = IOMUX_PIN(63, 13), + MX31_PIN_SD1_DATA2 = IOMUX_PIN(62, 14), + MX31_PIN_SD1_DATA1 = IOMUX_PIN(61, 15), + MX31_PIN_SD1_DATA0 = IOMUX_PIN(60, 16), + MX31_PIN_SD1_CLK = IOMUX_PIN(59, 17), + MX31_PIN_SD1_CMD = IOMUX_PIN(58, 18), + MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19), + MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20), + MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21), + MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22), + MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23), + MX31_PIN_READ = IOMUX_PIN(0xff, 24), + MX31_PIN_WRITE = IOMUX_PIN(0xff, 25), + MX31_PIN_PAR_RS = IOMUX_PIN(0xff, 26), + MX31_PIN_SER_RS = IOMUX_PIN(89, 27), + MX31_PIN_LCS1 = IOMUX_PIN(88, 28), + MX31_PIN_LCS0 = IOMUX_PIN(87, 29), + MX31_PIN_SD_D_CLK = IOMUX_PIN(86, 30), + MX31_PIN_SD_D_IO = IOMUX_PIN(85, 31), + MX31_PIN_SD_D_I = IOMUX_PIN(84, 32), + MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33), + MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34), + MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35), + MX31_PIN_VSYNC0 = IOMUX_PIN(0xff, 36), + MX31_PIN_LD17 = IOMUX_PIN(0xff, 37), + MX31_PIN_LD16 = IOMUX_PIN(0xff, 38), + MX31_PIN_LD15 = IOMUX_PIN(0xff, 39), + MX31_PIN_LD14 = IOMUX_PIN(0xff, 40), + MX31_PIN_LD13 = IOMUX_PIN(0xff, 41), + MX31_PIN_LD12 = IOMUX_PIN(0xff, 42), + MX31_PIN_LD11 = IOMUX_PIN(0xff, 43), + MX31_PIN_LD10 = IOMUX_PIN(0xff, 44), + MX31_PIN_LD9 = IOMUX_PIN(0xff, 45), + MX31_PIN_LD8 = IOMUX_PIN(0xff, 46), + MX31_PIN_LD7 = IOMUX_PIN(0xff, 47), + MX31_PIN_LD6 = IOMUX_PIN(0xff, 48), + MX31_PIN_LD5 = IOMUX_PIN(0xff, 49), + MX31_PIN_LD4 = IOMUX_PIN(0xff, 50), + MX31_PIN_LD3 = IOMUX_PIN(0xff, 51), + MX31_PIN_LD2 = IOMUX_PIN(0xff, 52), + MX31_PIN_LD1 = IOMUX_PIN(0xff, 53), + MX31_PIN_LD0 = IOMUX_PIN(0xff, 54), + MX31_PIN_USBH2_DATA1 = IOMUX_PIN(0xff, 55), + MX31_PIN_USBH2_DATA0 = IOMUX_PIN(0xff, 56), + MX31_PIN_USBH2_NXT = IOMUX_PIN(0xff, 57), + MX31_PIN_USBH2_STP = IOMUX_PIN(0xff, 58), + MX31_PIN_USBH2_DIR = IOMUX_PIN(0xff, 59), + MX31_PIN_USBH2_CLK = IOMUX_PIN(0xff, 60), + MX31_PIN_USBOTG_DATA7 = IOMUX_PIN(0xff, 61), + MX31_PIN_USBOTG_DATA6 = IOMUX_PIN(0xff, 62), + MX31_PIN_USBOTG_DATA5 = IOMUX_PIN(0xff, 63), + MX31_PIN_USBOTG_DATA4 = IOMUX_PIN(0xff, 64), + MX31_PIN_USBOTG_DATA3 = IOMUX_PIN(0xff, 65), + MX31_PIN_USBOTG_DATA2 = IOMUX_PIN(0xff, 66), + MX31_PIN_USBOTG_DATA1 = IOMUX_PIN(0xff, 67), + MX31_PIN_USBOTG_DATA0 = IOMUX_PIN(0xff, 68), + MX31_PIN_USBOTG_NXT = IOMUX_PIN(0xff, 69), + MX31_PIN_USBOTG_STP = IOMUX_PIN(0xff, 70), + MX31_PIN_USBOTG_DIR = IOMUX_PIN(0xff, 71), + MX31_PIN_USBOTG_CLK = IOMUX_PIN(0xff, 72), + MX31_PIN_USB_BYP = IOMUX_PIN(31, 73), + MX31_PIN_USB_OC = IOMUX_PIN(30, 74), + MX31_PIN_USB_PWR = IOMUX_PIN(29, 75), + MX31_PIN_SJC_MOD = IOMUX_PIN(0xff, 76), + MX31_PIN_DE_B = IOMUX_PIN(0xff, 77), + MX31_PIN_TRSTB = IOMUX_PIN(0xff, 78), + MX31_PIN_TDO = IOMUX_PIN(0xff, 79), + MX31_PIN_TDI = IOMUX_PIN(0xff, 80), + MX31_PIN_TMS = IOMUX_PIN(0xff, 81), + MX31_PIN_TCK = IOMUX_PIN(0xff, 82), + MX31_PIN_RTCK = IOMUX_PIN(0xff, 83), + MX31_PIN_KEY_COL7 = IOMUX_PIN(57, 84), + MX31_PIN_KEY_COL6 = IOMUX_PIN(56, 85), + MX31_PIN_KEY_COL5 = IOMUX_PIN(55, 86), + MX31_PIN_KEY_COL4 = IOMUX_PIN(54, 87), + MX31_PIN_KEY_COL3 = IOMUX_PIN(0xff, 88), + MX31_PIN_KEY_COL2 = IOMUX_PIN(0xff, 89), + MX31_PIN_KEY_COL1 = IOMUX_PIN(0xff, 90), + MX31_PIN_KEY_COL0 = IOMUX_PIN(0xff, 91), + MX31_PIN_KEY_ROW7 = IOMUX_PIN(53, 92), + MX31_PIN_KEY_ROW6 = IOMUX_PIN(52, 93), + MX31_PIN_KEY_ROW5 = IOMUX_PIN(51, 94), + MX31_PIN_KEY_ROW4 = IOMUX_PIN(50, 95), + MX31_PIN_KEY_ROW3 = IOMUX_PIN(0xff, 96), + MX31_PIN_KEY_ROW2 = IOMUX_PIN(0xff, 97), + MX31_PIN_KEY_ROW1 = IOMUX_PIN(0xff, 98), + MX31_PIN_KEY_ROW0 = IOMUX_PIN(0xff, 99), + MX31_PIN_BATT_LINE = IOMUX_PIN(49, 100), + MX31_PIN_CTS2 = IOMUX_PIN(0xff, 101), + MX31_PIN_RTS2 = IOMUX_PIN(0xff, 102), + MX31_PIN_TXD2 = IOMUX_PIN(28, 103), + MX31_PIN_RXD2 = IOMUX_PIN(27, 104), + MX31_PIN_DTR_DCE2 = IOMUX_PIN(48, 105), + MX31_PIN_DCD_DTE1 = IOMUX_PIN(47, 106), + MX31_PIN_RI_DTE1 = IOMUX_PIN(46, 107), + MX31_PIN_DSR_DTE1 = IOMUX_PIN(45, 108), + MX31_PIN_DTR_DTE1 = IOMUX_PIN(44, 109), + MX31_PIN_DCD_DCE1 = IOMUX_PIN(43, 110), + MX31_PIN_RI_DCE1 = IOMUX_PIN(42, 111), + MX31_PIN_DSR_DCE1 = IOMUX_PIN(41, 112), + MX31_PIN_DTR_DCE1 = IOMUX_PIN(40, 113), + MX31_PIN_CTS1 = IOMUX_PIN(39, 114), + MX31_PIN_RTS1 = IOMUX_PIN(38, 115), + MX31_PIN_TXD1 = IOMUX_PIN(37, 116), + MX31_PIN_RXD1 = IOMUX_PIN(36, 117), + MX31_PIN_CSPI2_SPI_RDY = IOMUX_PIN(0xff, 118), + MX31_PIN_CSPI2_SCLK = IOMUX_PIN(0xff, 119), + MX31_PIN_CSPI2_SS2 = IOMUX_PIN(0xff, 120), + MX31_PIN_CSPI2_SS1 = IOMUX_PIN(0xff, 121), + MX31_PIN_CSPI2_SS0 = IOMUX_PIN(0xff, 122), + MX31_PIN_CSPI2_MISO = IOMUX_PIN(0xff, 123), + MX31_PIN_CSPI2_MOSI = IOMUX_PIN(0xff, 124), + MX31_PIN_CSPI1_SPI_RDY = IOMUX_PIN(0xff, 125), + MX31_PIN_CSPI1_SCLK = IOMUX_PIN(0xff, 126), + MX31_PIN_CSPI1_SS2 = IOMUX_PIN(0xff, 127), + MX31_PIN_CSPI1_SS1 = IOMUX_PIN(0xff, 128), + MX31_PIN_CSPI1_SS0 = IOMUX_PIN(0xff, 129), + MX31_PIN_CSPI1_MISO = IOMUX_PIN(0xff, 130), + MX31_PIN_CSPI1_MOSI = IOMUX_PIN(0xff, 131), + MX31_PIN_SFS6 = IOMUX_PIN(26, 132), + MX31_PIN_SCK6 = IOMUX_PIN(25, 133), + MX31_PIN_SRXD6 = IOMUX_PIN(24, 134), + MX31_PIN_STXD6 = IOMUX_PIN(23, 135), + MX31_PIN_SFS5 = IOMUX_PIN(0xff, 136), + MX31_PIN_SCK5 = IOMUX_PIN(0xff, 137), + MX31_PIN_SRXD5 = IOMUX_PIN(22, 138), + MX31_PIN_STXD5 = IOMUX_PIN(21, 139), + MX31_PIN_SFS4 = IOMUX_PIN(0xff, 140), + MX31_PIN_SCK4 = IOMUX_PIN(0xff, 141), + MX31_PIN_SRXD4 = IOMUX_PIN(20, 142), + MX31_PIN_STXD4 = IOMUX_PIN(19, 143), + MX31_PIN_SFS3 = IOMUX_PIN(0xff, 144), + MX31_PIN_SCK3 = IOMUX_PIN(0xff, 145), + MX31_PIN_SRXD3 = IOMUX_PIN(18, 146), + MX31_PIN_STXD3 = IOMUX_PIN(17, 147), + MX31_PIN_I2C_DAT = IOMUX_PIN(0xff, 148), + MX31_PIN_I2C_CLK = IOMUX_PIN(0xff, 149), + MX31_PIN_CSI_PIXCLK = IOMUX_PIN(83, 150), + MX31_PIN_CSI_HSYNC = IOMUX_PIN(82, 151), + MX31_PIN_CSI_VSYNC = IOMUX_PIN(81, 152), + MX31_PIN_CSI_MCLK = IOMUX_PIN(80, 153), + MX31_PIN_CSI_D15 = IOMUX_PIN(79, 154), + MX31_PIN_CSI_D14 = IOMUX_PIN(78, 155), + MX31_PIN_CSI_D13 = IOMUX_PIN(77, 156), + MX31_PIN_CSI_D12 = IOMUX_PIN(76, 157), + MX31_PIN_CSI_D11 = IOMUX_PIN(75, 158), + MX31_PIN_CSI_D10 = IOMUX_PIN(74, 159), + MX31_PIN_CSI_D9 = IOMUX_PIN(73, 160), + MX31_PIN_CSI_D8 = IOMUX_PIN(72, 161), + MX31_PIN_CSI_D7 = IOMUX_PIN(71, 162), + MX31_PIN_CSI_D6 = IOMUX_PIN(70, 163), + MX31_PIN_CSI_D5 = IOMUX_PIN(69, 164), + MX31_PIN_CSI_D4 = IOMUX_PIN(68, 165), + MX31_PIN_M_GRANT = IOMUX_PIN(0xff, 166), + MX31_PIN_M_REQUEST = IOMUX_PIN(0xff, 167), + MX31_PIN_PC_POE = IOMUX_PIN(0xff, 168), + MX31_PIN_PC_RW_B = IOMUX_PIN(0xff, 169), + MX31_PIN_IOIS16 = IOMUX_PIN(0xff, 170), + MX31_PIN_PC_RST = IOMUX_PIN(0xff, 171), + MX31_PIN_PC_BVD2 = IOMUX_PIN(0xff, 172), + MX31_PIN_PC_BVD1 = IOMUX_PIN(0xff, 173), + MX31_PIN_PC_VS2 = IOMUX_PIN(0xff, 174), + MX31_PIN_PC_VS1 = IOMUX_PIN(0xff, 175), + MX31_PIN_PC_PWRON = IOMUX_PIN(0xff, 176), + MX31_PIN_PC_READY = IOMUX_PIN(0xff, 177), + MX31_PIN_PC_WAIT_B = IOMUX_PIN(0xff, 178), + MX31_PIN_PC_CD2_B = IOMUX_PIN(0xff, 179), + MX31_PIN_PC_CD1_B = IOMUX_PIN(0xff, 180), + MX31_PIN_D0 = IOMUX_PIN(0xff, 181), + MX31_PIN_D1 = IOMUX_PIN(0xff, 182), + MX31_PIN_D2 = IOMUX_PIN(0xff, 183), + MX31_PIN_D3 = IOMUX_PIN(0xff, 184), + MX31_PIN_D4 = IOMUX_PIN(0xff, 185), + MX31_PIN_D5 = IOMUX_PIN(0xff, 186), + MX31_PIN_D6 = IOMUX_PIN(0xff, 187), + MX31_PIN_D7 = IOMUX_PIN(0xff, 188), + MX31_PIN_D8 = IOMUX_PIN(0xff, 189), + MX31_PIN_D9 = IOMUX_PIN(0xff, 190), + MX31_PIN_D10 = IOMUX_PIN(0xff, 191), + MX31_PIN_D11 = IOMUX_PIN(0xff, 192), + MX31_PIN_D12 = IOMUX_PIN(0xff, 193), + MX31_PIN_D13 = IOMUX_PIN(0xff, 194), + MX31_PIN_D14 = IOMUX_PIN(0xff, 195), + MX31_PIN_D15 = IOMUX_PIN(0xff, 196), + MX31_PIN_NFRB = IOMUX_PIN(16, 197), + MX31_PIN_NFCE_B = IOMUX_PIN(15, 198), + MX31_PIN_NFWP_B = IOMUX_PIN(14, 199), + MX31_PIN_NFCLE = IOMUX_PIN(13, 200), + MX31_PIN_NFALE = IOMUX_PIN(12, 201), + MX31_PIN_NFRE_B = IOMUX_PIN(11, 202), + MX31_PIN_NFWE_B = IOMUX_PIN(10, 203), + MX31_PIN_SDQS3 = IOMUX_PIN(0xff, 204), + MX31_PIN_SDQS2 = IOMUX_PIN(0xff, 205), + MX31_PIN_SDQS1 = IOMUX_PIN(0xff, 206), + MX31_PIN_SDQS0 = IOMUX_PIN(0xff, 207), + MX31_PIN_SDCLK_B = IOMUX_PIN(0xff, 208), + MX31_PIN_SDCLK = IOMUX_PIN(0xff, 209), + MX31_PIN_SDCKE1 = IOMUX_PIN(0xff, 210), + MX31_PIN_SDCKE0 = IOMUX_PIN(0xff, 211), + MX31_PIN_SDWE = IOMUX_PIN(0xff, 212), + MX31_PIN_CAS = IOMUX_PIN(0xff, 213), + MX31_PIN_RAS = IOMUX_PIN(0xff, 214), + MX31_PIN_RW = IOMUX_PIN(0xff, 215), + MX31_PIN_BCLK = IOMUX_PIN(0xff, 216), + MX31_PIN_LBA = IOMUX_PIN(0xff, 217), + MX31_PIN_ECB = IOMUX_PIN(0xff, 218), + MX31_PIN_CS5 = IOMUX_PIN(0xff, 219), + MX31_PIN_CS4 = IOMUX_PIN(0xff, 220), + MX31_PIN_CS3 = IOMUX_PIN(0xff, 221), + MX31_PIN_CS2 = IOMUX_PIN(0xff, 222), + MX31_PIN_CS1 = IOMUX_PIN(0xff, 223), + MX31_PIN_CS0 = IOMUX_PIN(0xff, 224), + MX31_PIN_OE = IOMUX_PIN(0xff, 225), + MX31_PIN_EB1 = IOMUX_PIN(0xff, 226), + MX31_PIN_EB0 = IOMUX_PIN(0xff, 227), + MX31_PIN_DQM3 = IOMUX_PIN(0xff, 228), + MX31_PIN_DQM2 = IOMUX_PIN(0xff, 229), + MX31_PIN_DQM1 = IOMUX_PIN(0xff, 230), + MX31_PIN_DQM0 = IOMUX_PIN(0xff, 231), + MX31_PIN_SD31 = IOMUX_PIN(0xff, 232), + MX31_PIN_SD30 = IOMUX_PIN(0xff, 233), + MX31_PIN_SD29 = IOMUX_PIN(0xff, 234), + MX31_PIN_SD28 = IOMUX_PIN(0xff, 235), + MX31_PIN_SD27 = IOMUX_PIN(0xff, 236), + MX31_PIN_SD26 = IOMUX_PIN(0xff, 237), + MX31_PIN_SD25 = IOMUX_PIN(0xff, 238), + MX31_PIN_SD24 = IOMUX_PIN(0xff, 239), + MX31_PIN_SD23 = IOMUX_PIN(0xff, 240), + MX31_PIN_SD22 = IOMUX_PIN(0xff, 241), + MX31_PIN_SD21 = IOMUX_PIN(0xff, 242), + MX31_PIN_SD20 = IOMUX_PIN(0xff, 243), + MX31_PIN_SD19 = IOMUX_PIN(0xff, 244), + MX31_PIN_SD18 = IOMUX_PIN(0xff, 245), + MX31_PIN_SD17 = IOMUX_PIN(0xff, 246), + MX31_PIN_SD16 = IOMUX_PIN(0xff, 247), + MX31_PIN_SD15 = IOMUX_PIN(0xff, 248), + MX31_PIN_SD14 = IOMUX_PIN(0xff, 249), + MX31_PIN_SD13 = IOMUX_PIN(0xff, 250), + MX31_PIN_SD12 = IOMUX_PIN(0xff, 251), + MX31_PIN_SD11 = IOMUX_PIN(0xff, 252), + MX31_PIN_SD10 = IOMUX_PIN(0xff, 253), + MX31_PIN_SD9 = IOMUX_PIN(0xff, 254), + MX31_PIN_SD8 = IOMUX_PIN(0xff, 255), + MX31_PIN_SD7 = IOMUX_PIN(0xff, 256), + MX31_PIN_SD6 = IOMUX_PIN(0xff, 257), + MX31_PIN_SD5 = IOMUX_PIN(0xff, 258), + MX31_PIN_SD4 = IOMUX_PIN(0xff, 259), + MX31_PIN_SD3 = IOMUX_PIN(0xff, 260), + MX31_PIN_SD2 = IOMUX_PIN(0xff, 261), + MX31_PIN_SD1 = IOMUX_PIN(0xff, 262), + MX31_PIN_SD0 = IOMUX_PIN(0xff, 263), + MX31_PIN_SDBA0 = IOMUX_PIN(0xff, 264), + MX31_PIN_SDBA1 = IOMUX_PIN(0xff, 265), + MX31_PIN_A25 = IOMUX_PIN(0xff, 266), + MX31_PIN_A24 = IOMUX_PIN(0xff, 267), + MX31_PIN_A23 = IOMUX_PIN(0xff, 268), + MX31_PIN_A22 = IOMUX_PIN(0xff, 269), + MX31_PIN_A21 = IOMUX_PIN(0xff, 270), + MX31_PIN_A20 = IOMUX_PIN(0xff, 271), + MX31_PIN_A19 = IOMUX_PIN(0xff, 272), + MX31_PIN_A18 = IOMUX_PIN(0xff, 273), + MX31_PIN_A17 = IOMUX_PIN(0xff, 274), + MX31_PIN_A16 = IOMUX_PIN(0xff, 275), + MX31_PIN_A14 = IOMUX_PIN(0xff, 276), + MX31_PIN_A15 = IOMUX_PIN(0xff, 277), + MX31_PIN_A13 = IOMUX_PIN(0xff, 278), + MX31_PIN_A12 = IOMUX_PIN(0xff, 279), + MX31_PIN_A11 = IOMUX_PIN(0xff, 280), + MX31_PIN_MA10 = IOMUX_PIN(0xff, 281), + MX31_PIN_A10 = IOMUX_PIN(0xff, 282), + MX31_PIN_A9 = IOMUX_PIN(0xff, 283), + MX31_PIN_A8 = IOMUX_PIN(0xff, 284), + MX31_PIN_A7 = IOMUX_PIN(0xff, 285), + MX31_PIN_A6 = IOMUX_PIN(0xff, 286), + MX31_PIN_A5 = IOMUX_PIN(0xff, 287), + MX31_PIN_A4 = IOMUX_PIN(0xff, 288), + MX31_PIN_A3 = IOMUX_PIN(0xff, 289), + MX31_PIN_A2 = IOMUX_PIN(0xff, 290), + MX31_PIN_A1 = IOMUX_PIN(0xff, 291), + MX31_PIN_A0 = IOMUX_PIN(0xff, 292), + MX31_PIN_VPG1 = IOMUX_PIN(0xff, 293), + MX31_PIN_VPG0 = IOMUX_PIN(0xff, 294), + MX31_PIN_DVFS1 = IOMUX_PIN(0xff, 295), + MX31_PIN_DVFS0 = IOMUX_PIN(0xff, 296), + MX31_PIN_VSTBY = IOMUX_PIN(0xff, 297), + MX31_PIN_POWER_FAIL = IOMUX_PIN(0xff, 298), + MX31_PIN_CKIL = IOMUX_PIN(0xff, 299), + MX31_PIN_BOOT_MODE4 = IOMUX_PIN(0xff, 300), + MX31_PIN_BOOT_MODE3 = IOMUX_PIN(0xff, 301), + MX31_PIN_BOOT_MODE2 = IOMUX_PIN(0xff, 302), + MX31_PIN_BOOT_MODE1 = IOMUX_PIN(0xff, 303), + MX31_PIN_BOOT_MODE0 = IOMUX_PIN(0xff, 304), + MX31_PIN_CLKO = IOMUX_PIN(0xff, 305), + MX31_PIN_POR_B = IOMUX_PIN(0xff, 306), + MX31_PIN_RESET_IN_B = IOMUX_PIN(0xff, 307), + MX31_PIN_CKIH = IOMUX_PIN(0xff, 308), + MX31_PIN_SIMPD0 = IOMUX_PIN(35, 309), + MX31_PIN_SRX0 = IOMUX_PIN(34, 310), + MX31_PIN_STX0 = IOMUX_PIN(33, 311), + MX31_PIN_SVEN0 = IOMUX_PIN(32, 312), + MX31_PIN_SRST0 = IOMUX_PIN(67, 313), + MX31_PIN_SCLK0 = IOMUX_PIN(66, 314), + MX31_PIN_GPIO3_1 = IOMUX_PIN(65, 315), + MX31_PIN_GPIO3_0 = IOMUX_PIN(64, 316), + MX31_PIN_GPIO1_6 = IOMUX_PIN( 6, 317), + MX31_PIN_GPIO1_5 = IOMUX_PIN( 5, 318), + MX31_PIN_GPIO1_4 = IOMUX_PIN( 4, 319), + MX31_PIN_GPIO1_3 = IOMUX_PIN( 3, 320), + MX31_PIN_GPIO1_2 = IOMUX_PIN( 2, 321), + MX31_PIN_GPIO1_1 = IOMUX_PIN( 1, 322), + MX31_PIN_GPIO1_0 = IOMUX_PIN( 0, 323), + MX31_PIN_PWMO = IOMUX_PIN( 9, 324), + MX31_PIN_WATCHDOG_RST = IOMUX_PIN(0xff, 325), + MX31_PIN_COMPARE = IOMUX_PIN( 8, 326), + MX31_PIN_CAPTURE = IOMUX_PIN( 7, 327), +}; + +/* + * Convenience values for use with mxc_iomux_mode() + * + * Format here is MX31_PIN_(pin name)__(function) + */ +#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1) +#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC) +#define MX31_PIN_RXD1__RXD1 IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC) + +/* + * This function configures the pad value for a IOMUX pin. + */ +void mxc_iomux_set_pad(enum iomux_pins, u32); + +#endif + -- cgit v1.2.3 From d0f349fbce2905607e0473d2358f97f48866e52c Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:50 +0200 Subject: i.MXC family: Adding timer support This patch adds timer support for the i.MX machine family. This code can be used on the following machs: - i.MX1 (tested) - i.MX2 (i.MX21 (to be tested), i.MX27 (tested)) - i.MX3 (i.MX31 (tested)) TODO: It seems impossible to build a kernel for more than one CPU because the timer do not follow the platform device rules. So it does only work if timer 1 can be accessed on all CPUs at the same address. Signed-off-by: Juergen Beisert Signed-off-by: Sascha Hauer --- arch/arm/Kconfig | 2 + arch/arm/mach-mx3/Makefile | 2 +- arch/arm/mach-mx3/mx31ads.c | 13 +- arch/arm/mach-mx3/time.c | 148 ----------------------- arch/arm/plat-mxc/Makefile | 2 +- arch/arm/plat-mxc/time.c | 228 +++++++++++++++++++++++++++++++++++ include/asm-arm/arch-mxc/common.h | 4 +- include/asm-arm/arch-mxc/mxc.h | 112 +++-------------- include/asm-arm/arch-mxc/mxc_timer.h | 158 ++++++++++++++++++++++++ 9 files changed, 418 insertions(+), 251 deletions(-) delete mode 100644 arch/arm/mach-mx3/time.c create mode 100644 arch/arm/plat-mxc/time.c create mode 100644 include/asm-arm/arch-mxc/mxc_timer.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5c8c1a89be73..8a9a84c4adfd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -367,6 +367,8 @@ config ARCH_NS9XXX config ARCH_MXC bool "Freescale MXC/iMX-based" + select GENERIC_TIME + select GENERIC_CLOCKEVENTS select ARCH_MTD_XIP select GENERIC_GPIO select HAVE_GPIO_LIB diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 68f062b70d33..562c75d2e379 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -4,5 +4,5 @@ # Object file lists. -obj-y := mm.o time.o clock.o devices.o iomux.o +obj-y := mm.o clock.o devices.o iomux.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 5addbb7f711c..eba3e0cd4283 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -127,6 +128,16 @@ static void __init mxc_board_init(void) mxc_init_extuart(); } +static void __init mx31ads_timer_init(void) +{ + mxc_clocks_init(26000000); + mxc_timer_init("ipg_clk.0"); +} + +struct sys_timer mx31ads_timer = { + .init = mx31ads_timer_init, +}; + /* * The following uses standard kernel macros defined in arch.h in order to * initialize __mach_desc_MX31ADS data structure. @@ -139,5 +150,5 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS") .map_io = mx31ads_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, - .timer = &mxc_timer, + .timer = &mx31ads_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/time.c b/arch/arm/mach-mx3/time.c deleted file mode 100644 index fb565c98dbfb..000000000000 --- a/arch/arm/mach-mx3/time.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * System Timer Interrupt reconfigured to run in free-run mode. - * Author: Vitaly Wool - * Copyright 2004 MontaVista Software Inc. - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/*! - * @file time.c - * @brief This file contains OS tick and wdog timer implementations. - * - * This file contains OS tick and wdog timer implementations. - * - * @ingroup Timers - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/*! - * This is the timer interrupt service routine to do required tasks. - * It also services the WDOG timer at the frequency of twice per WDOG - * timeout value. For example, if the WDOG's timeout value is 4 (2 - * seconds since the WDOG runs at 0.5Hz), it will be serviced once - * every 2/2=1 second. - * - * @param irq GPT interrupt source number (not used) - * @param dev_id this parameter is not used - * @return always returns \b IRQ_HANDLED as defined in - * include/linux/interrupt.h. - */ -static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) -{ - unsigned int next_match; - - if (__raw_readl(MXC_GPT_GPTSR) & GPTSR_OF1) { - do { - timer_tick(); - next_match = __raw_readl(MXC_GPT_GPTOCR1) + LATCH; - __raw_writel(GPTSR_OF1, MXC_GPT_GPTSR); - __raw_writel(next_match, MXC_GPT_GPTOCR1); - } while ((signed long)(next_match - - __raw_readl(MXC_GPT_GPTCNT)) <= 0); - } - - return IRQ_HANDLED; -} - -/*! - * This function is used to obtain the number of microseconds since the last - * timer interrupt. Note that interrupts is disabled by do_gettimeofday(). - * - * @return the number of microseconds since the last timer interrupt. - */ -static unsigned long mxc_gettimeoffset(void) -{ - unsigned long ticks_to_match, elapsed, usec, tick_usec, i; - - /* Get ticks before next timer match */ - ticks_to_match = - __raw_readl(MXC_GPT_GPTOCR1) - __raw_readl(MXC_GPT_GPTCNT); - - /* We need elapsed ticks since last match */ - elapsed = LATCH - ticks_to_match; - - /* Now convert them to usec */ - /* Insure no overflow when calculating the usec below */ - for (i = 1, tick_usec = tick_nsec / 1000;; i *= 2) { - tick_usec /= i; - if ((0xFFFFFFFF / tick_usec) > elapsed) - break; - } - usec = (unsigned long)(elapsed * tick_usec) / (LATCH / i); - - return usec; -} - -/*! - * The OS tick timer interrupt structure. - */ -static struct irqaction timer_irq = { - .name = "MXC Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = mxc_timer_interrupt -}; - -/*! - * This function is used to initialize the GPT to produce an interrupt - * based on HZ. It is called by start_kernel() during system startup. - */ -void __init mxc_init_time(void) -{ - u32 reg, v; - reg = __raw_readl(MXC_GPT_GPTCR); - reg &= ~GPTCR_ENABLE; - __raw_writel(reg, MXC_GPT_GPTCR); - reg |= GPTCR_SWR; - __raw_writel(reg, MXC_GPT_GPTCR); - - while ((__raw_readl(MXC_GPT_GPTCR) & GPTCR_SWR) != 0) - cpu_relax(); - - reg = GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ; - __raw_writel(reg, MXC_GPT_GPTCR); - - /* TODO: get timer rate from clk driver */ - v = 66500000; - - __raw_writel((v / CLOCK_TICK_RATE) - 1, MXC_GPT_GPTPR); - - if ((v % CLOCK_TICK_RATE) != 0) { - pr_info("\nWARNING: Can't generate CLOCK_TICK_RATE at %d Hz\n", - CLOCK_TICK_RATE); - } - pr_info("Actual CLOCK_TICK_RATE is %d Hz\n", - v / ((__raw_readl(MXC_GPT_GPTPR) & 0xFFF) + 1)); - - reg = __raw_readl(MXC_GPT_GPTCNT); - reg += LATCH; - __raw_writel(reg, MXC_GPT_GPTOCR1); - - setup_irq(MXC_INT_GPT, &timer_irq); - - reg = __raw_readl(MXC_GPT_GPTCR); - reg = - GPTCR_FRR | GPTCR_CLKSRC_HIGHFREQ | GPTCR_STOPEN | GPTCR_DOZEN | - GPTCR_WAITEN | GPTCR_ENMOD | GPTCR_ENABLE; - __raw_writel(reg, MXC_GPT_GPTCR); - - __raw_writel(GPTIR_OF1IE, MXC_GPT_GPTIR); -} - -struct sys_timer mxc_timer = { - .init = mxc_init_time, - .offset = mxc_gettimeoffset, -}; diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 66272a6fc323..e3cc25c6d46f 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,4 +3,4 @@ # # Common support -obj-y := irq.o clock.o gpio.o +obj-y := irq.o clock.o gpio.o time.o diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c new file mode 100644 index 000000000000..3bf86343fdf4 --- /dev/null +++ b/arch/arm/plat-mxc/time.c @@ -0,0 +1,228 @@ +/* + * linux/arch/arm/plat-mxc/time.c + * + * Copyright (C) 2000-2001 Deep Blue Solutions + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +static struct clock_event_device clockevent_mxc; +static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; + +/* clock source for the timer */ +static struct clk *timer_clk; + +/* clock source */ + +static cycle_t mxc_get_cycles(void) +{ + return __raw_readl(TIMER_BASE + MXC_TCN); +} + +static struct clocksource clocksource_mxc = { + .name = "mxc_timer1", + .rating = 200, + .read = mxc_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init mxc_clocksource_init(void) +{ + unsigned int clock; + + clock = clk_get_rate(timer_clk); + + clocksource_mxc.mult = clocksource_hz2mult(clock, + clocksource_mxc.shift); + clocksource_register(&clocksource_mxc); + + return 0; +} + +/* clock event */ + +static int mxc_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long tcmp; + + tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt; + __raw_writel(tcmp, TIMER_BASE + MXC_TCMP); + + return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ? + -ETIME : 0; +} + +#ifdef DEBUG +static const char *clock_event_mode_label[] = { + [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", + [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", + [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", + [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED" +}; +#endif /* DEBUG */ + +static void mxc_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + + /* + * The timer interrupt generation is disabled at least + * for enough time to call mxc_set_next_event() + */ + local_irq_save(flags); + + /* Disable interrupt in GPT module */ + gpt_irq_disable(); + + if (mode != clockevent_mode) { + /* Set event time into far-far future */ + __raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3, + TIMER_BASE + MXC_TCMP); + /* Clear pending interrupt */ + gpt_irq_acknowledge(); + } + +#ifdef DEBUG + printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n", + clock_event_mode_label[clockevent_mode], + clock_event_mode_label[mode]); +#endif /* DEBUG */ + + /* Remember timer mode */ + clockevent_mode = mode; + local_irq_restore(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + printk(KERN_ERR"mxc_set_mode: Periodic mode is not " + "supported for i.MX\n"); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* + * Do not put overhead of interrupt enable/disable into + * mxc_set_next_event(), the core has about 4 minutes + * to call mxc_set_next_event() or shutdown clock after + * mode switching + */ + local_irq_save(flags); + gpt_irq_enable(); + local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + /* Left event sources disabled, no more interrupts appear */ + break; + } +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clockevent_mxc; + uint32_t tstat; + + tstat = __raw_readl(TIMER_BASE + MXC_TSTAT); + + gpt_irq_acknowledge(); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction mxc_timer_irq = { + .name = "i.MX Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = mxc_timer_interrupt, +}; + +static struct clock_event_device clockevent_mxc = { + .name = "mxc_timer1", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_mode = mxc_set_mode, + .set_next_event = mxc_set_next_event, + .rating = 200, +}; + +static int __init mxc_clockevent_init(void) +{ + unsigned int clock; + + clock = clk_get_rate(timer_clk); + + clockevent_mxc.mult = div_sc(clock, NSEC_PER_SEC, + clockevent_mxc.shift); + clockevent_mxc.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &clockevent_mxc); + clockevent_mxc.min_delta_ns = + clockevent_delta2ns(0xff, &clockevent_mxc); + + clockevent_mxc.cpumask = cpumask_of_cpu(0); + + clockevents_register_device(&clockevent_mxc); + + return 0; +} + +void __init mxc_timer_init(const char *clk_timer) +{ + timer_clk = clk_get(NULL, clk_timer); + if (!timer_clk) { + printk(KERN_ERR"Cannot determine timer clock. Giving up.\n"); + return; + } + + clk_enable(timer_clk); + + /* + * Initialise to a known state (all timers off, and timing reset) + */ + __raw_writel(0, TIMER_BASE + MXC_TCTL); + __raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */ + + __raw_writel(TCTL_FRR | /* free running */ + TCTL_VAL | /* set clocksource and arch specific bits */ + TCTL_TEN, /* start the timer */ + TIMER_BASE + MXC_TCTL); + + /* init and register the timer to the framework */ + mxc_clocksource_init(); + mxc_clockevent_init(); + + /* Make irqs happen */ + setup_irq(TIMER_INTERRUPT, &mxc_timer_irq); +} + diff --git a/include/asm-arm/arch-mxc/common.h b/include/asm-arm/arch-mxc/common.h index 8774783ed984..a6d2e24aab15 100644 --- a/include/asm-arm/arch-mxc/common.h +++ b/include/asm-arm/arch-mxc/common.h @@ -11,11 +11,9 @@ #ifndef __ASM_ARCH_MXC_COMMON_H__ #define __ASM_ARCH_MXC_COMMON_H__ -struct sys_timer; - extern void mxc_map_io(void); extern void mxc_init_irq(void); -extern struct sys_timer mxc_timer; +extern void mxc_timer_init(const char *clk_timer); extern int mxc_clocks_init(unsigned long fref); extern int mxc_register_gpios(void); diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h index 146d3f60951a..1df4e2f24920 100644 --- a/include/asm-arm/arch-mxc/mxc.h +++ b/include/asm-arm/arch-mxc/mxc.h @@ -1,11 +1,20 @@ /* * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. */ #ifndef __ASM_ARCH_MXC_H__ @@ -20,97 +29,6 @@ # define cpu_is_mx31() (0) #endif -/* - ***************************************** - * GPT Register definitions * - ***************************************** - */ -#define MXC_GPT_GPTCR IO_ADDRESS(GPT1_BASE_ADDR + 0x00) -#define MXC_GPT_GPTPR IO_ADDRESS(GPT1_BASE_ADDR + 0x04) -#define MXC_GPT_GPTSR IO_ADDRESS(GPT1_BASE_ADDR + 0x08) -#define MXC_GPT_GPTIR IO_ADDRESS(GPT1_BASE_ADDR + 0x0C) -#define MXC_GPT_GPTOCR1 IO_ADDRESS(GPT1_BASE_ADDR + 0x10) -#define MXC_GPT_GPTOCR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x14) -#define MXC_GPT_GPTOCR3 IO_ADDRESS(GPT1_BASE_ADDR + 0x18) -#define MXC_GPT_GPTICR1 IO_ADDRESS(GPT1_BASE_ADDR + 0x1C) -#define MXC_GPT_GPTICR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x20) -#define MXC_GPT_GPTCNT IO_ADDRESS(GPT1_BASE_ADDR + 0x24) - -/* GPT Control register bit definitions */ -#define GPTCR_FO3 (1 << 31) -#define GPTCR_FO2 (1 << 30) -#define GPTCR_FO1 (1 << 29) - -#define GPTCR_OM3_SHIFT 26 -#define GPTCR_OM3_MASK (7 << GPTCR_OM3_SHIFT) -#define GPTCR_OM3_DISCONNECTED (0 << GPTCR_OM3_SHIFT) -#define GPTCR_OM3_TOGGLE (1 << GPTCR_OM3_SHIFT) -#define GPTCR_OM3_CLEAR (2 << GPTCR_OM3_SHIFT) -#define GPTCR_OM3_SET (3 << GPTCR_OM3_SHIFT) -#define GPTCR_OM3_GENERATE_LOW (7 << GPTCR_OM3_SHIFT) - -#define GPTCR_OM2_SHIFT 23 -#define GPTCR_OM2_MASK (7 << GPTCR_OM2_SHIFT) -#define GPTCR_OM2_DISCONNECTED (0 << GPTCR_OM2_SHIFT) -#define GPTCR_OM2_TOGGLE (1 << GPTCR_OM2_SHIFT) -#define GPTCR_OM2_CLEAR (2 << GPTCR_OM2_SHIFT) -#define GPTCR_OM2_SET (3 << GPTCR_OM2_SHIFT) -#define GPTCR_OM2_GENERATE_LOW (7 << GPTCR_OM2_SHIFT) - -#define GPTCR_OM1_SHIFT 20 -#define GPTCR_OM1_MASK (7 << GPTCR_OM1_SHIFT) -#define GPTCR_OM1_DISCONNECTED (0 << GPTCR_OM1_SHIFT) -#define GPTCR_OM1_TOGGLE (1 << GPTCR_OM1_SHIFT) -#define GPTCR_OM1_CLEAR (2 << GPTCR_OM1_SHIFT) -#define GPTCR_OM1_SET (3 << GPTCR_OM1_SHIFT) -#define GPTCR_OM1_GENERATE_LOW (7 << GPTCR_OM1_SHIFT) - -#define GPTCR_IM2_SHIFT 18 -#define GPTCR_IM2_MASK (3 << GPTCR_IM2_SHIFT) -#define GPTCR_IM2_CAPTURE_DISABLE (0 << GPTCR_IM2_SHIFT) -#define GPTCR_IM2_CAPTURE_RISING (1 << GPTCR_IM2_SHIFT) -#define GPTCR_IM2_CAPTURE_FALLING (2 << GPTCR_IM2_SHIFT) -#define GPTCR_IM2_CAPTURE_BOTH (3 << GPTCR_IM2_SHIFT) - -#define GPTCR_IM1_SHIFT 16 -#define GPTCR_IM1_MASK (3 << GPTCR_IM1_SHIFT) -#define GPTCR_IM1_CAPTURE_DISABLE (0 << GPTCR_IM1_SHIFT) -#define GPTCR_IM1_CAPTURE_RISING (1 << GPTCR_IM1_SHIFT) -#define GPTCR_IM1_CAPTURE_FALLING (2 << GPTCR_IM1_SHIFT) -#define GPTCR_IM1_CAPTURE_BOTH (3 << GPTCR_IM1_SHIFT) - -#define GPTCR_SWR (1 << 15) -#define GPTCR_FRR (1 << 9) - -#define GPTCR_CLKSRC_SHIFT 6 -#define GPTCR_CLKSRC_MASK (7 << GPTCR_CLKSRC_SHIFT) -#define GPTCR_CLKSRC_NOCLOCK (0 << GPTCR_CLKSRC_SHIFT) -#define GPTCR_CLKSRC_HIGHFREQ (2 << GPTCR_CLKSRC_SHIFT) -#define GPTCR_CLKSRC_CLKIN (3 << GPTCR_CLKSRC_SHIFT) -#define GPTCR_CLKSRC_CLK32K (7 << GPTCR_CLKSRC_SHIFT) - -#define GPTCR_STOPEN (1 << 5) -#define GPTCR_DOZEN (1 << 4) -#define GPTCR_WAITEN (1 << 3) -#define GPTCR_DBGEN (1 << 2) - -#define GPTCR_ENMOD (1 << 1) -#define GPTCR_ENABLE (1 << 0) - -#define GPTSR_OF1 (1 << 0) -#define GPTSR_OF2 (1 << 1) -#define GPTSR_OF3 (1 << 2) -#define GPTSR_IF1 (1 << 3) -#define GPTSR_IF2 (1 << 4) -#define GPTSR_ROV (1 << 5) - -#define GPTIR_OF1IE GPTSR_OF1 -#define GPTIR_OF2IE GPTSR_OF2 -#define GPTIR_OF3IE GPTSR_OF3 -#define GPTIR_IF1IE GPTSR_IF1 -#define GPTIR_IF2IE GPTSR_IF2 -#define GPTIR_ROVIE GPTSR_ROV - /* ***************************************** * AVIC Registers * diff --git a/include/asm-arm/arch-mxc/mxc_timer.h b/include/asm-arm/arch-mxc/mxc_timer.h new file mode 100644 index 000000000000..6cb11f4f1a06 --- /dev/null +++ b/include/asm-arm/arch-mxc/mxc_timer.h @@ -0,0 +1,158 @@ +/* + * mxc_timer.h + * + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef __PLAT_MXC_TIMER_H +#define __PLAT_MXC_TIMER_H + +#include +#include + +#ifdef CONFIG_ARCH_IMX +#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR) +#define TIMER_INTERRUPT TIM1_INT + +#define TCTL_VAL TCTL_CLK_PCLK1 +#define TCTL_IRQEN (1<<4) +#define TCTL_FRR (1<<8) +#define TCTL_CLK_PCLK1 (1<<1) +#define TCTL_CLK_PCLK1_4 (2<<1) +#define TCTL_CLK_TIN (3<<1) +#define TCTL_CLK_32 (4<<1) + +#define MXC_TCTL 0x00 +#define MXC_TPRER 0x04 +#define MXC_TCMP 0x08 +#define MXC_TCR 0x0c +#define MXC_TCN 0x10 +#define MXC_TSTAT 0x14 +#define TSTAT_CAPT (1<<1) +#define TSTAT_COMP (1<<0) + +static inline void gpt_irq_disable(void) +{ + unsigned int tmp; + + tmp = __raw_readl(TIMER_BASE + MXC_TCTL); + __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); +} + +static inline void gpt_irq_enable(void) +{ + __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, + TIMER_BASE + MXC_TCTL); +} + +static void gpt_irq_acknowledge(void) +{ + __raw_writel(0, TIMER_BASE + MXC_TSTAT); +} +#endif /* CONFIG_ARCH_IMX */ + +#ifdef CONFIG_ARCH_MX2 +#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) +#define TIMER_INTERRUPT MXC_INT_GPT1 + +#define MXC_TCTL 0x00 +#define TCTL_VAL TCTL_CLK_PCLK1 +#define TCTL_CLK_PCLK1 (1<<1) +#define TCTL_CLK_PCLK1_4 (2<<1) +#define TCTL_IRQEN (1<<4) +#define TCTL_FRR (1<<8) +#define MXC_TPRER 0x04 +#define MXC_TCMP 0x08 +#define MXC_TCR 0x0c +#define MXC_TCN 0x10 +#define MXC_TSTAT 0x14 +#define TSTAT_CAPT (1<<1) +#define TSTAT_COMP (1<<0) + +static inline void gpt_irq_disable(void) +{ + unsigned int tmp; + + tmp = __raw_readl(TIMER_BASE + MXC_TCTL); + __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL); +} + +static inline void gpt_irq_enable(void) +{ + __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN, + TIMER_BASE + MXC_TCTL); +} + +static void gpt_irq_acknowledge(void) +{ + __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT); +} +#endif /* CONFIG_ARCH_MX2 */ + +#ifdef CONFIG_ARCH_MX3 +#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR) +#define TIMER_INTERRUPT MXC_INT_GPT + +#define MXC_TCTL 0x00 +#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN) +#define TCTL_CLK_IPG (1<<6) +#define TCTL_FRR (1<<9) +#define TCTL_WAITEN (1<<3) + +#define MXC_TPRER 0x04 +#define MXC_TSTAT 0x08 +#define TSTAT_OF1 (1<<0) +#define TSTAT_OF2 (1<<1) +#define TSTAT_OF3 (1<<2) +#define TSTAT_IF1 (1<<3) +#define TSTAT_IF2 (1<<4) +#define TSTAT_ROV (1<<5) +#define MXC_IR 0x0c +#define MXC_TCMP 0x10 +#define MXC_TCMP2 0x14 +#define MXC_TCMP3 0x18 +#define MXC_TCR 0x1c +#define MXC_TCN 0x24 + +static inline void gpt_irq_disable(void) +{ + __raw_writel(0, TIMER_BASE + MXC_IR); +} + +static inline void gpt_irq_enable(void) +{ + __raw_writel(1<<0, TIMER_BASE + MXC_IR); +} + +static inline void gpt_irq_acknowledge(void) +{ + __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT); +} +#endif /* CONFIG_ARCH_MX3 */ + +#define TCTL_SWR (1<<15) +#define TCTL_CC (1<<10) +#define TCTL_OM (1<<9) +#define TCTL_CAP_RIS (1<<6) +#define TCTL_CAP_FAL (2<<6) +#define TCTL_CAP_RIS_FAL (3<<6) +#define TCTL_CAP_ENA (1<<5) +#define TCTL_TEN (1<<0) + +#endif -- cgit v1.2.3 From 4bc256501a159abc7e9fee43f63c68894f6a11d8 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:51 +0200 Subject: MXC: add debug-macro.S for mxc This patch adds debug-macro.S for arch-mxc Disadvantage: Due to the board specific UART definition, these macros (and compile time) will fail for multi board kernels. Signed-off-by: Sascha Hauer --- include/asm-arm/arch-mxc/board-mx31ads.h | 5 +++++ include/asm-arm/arch-mxc/debug-macro.S | 38 ++++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+) create mode 100644 include/asm-arm/arch-mxc/debug-macro.S diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/include/asm-arm/arch-mxc/board-mx31ads.h index 8590127760a8..1bc6fb0f9a83 100644 --- a/include/asm-arm/arch-mxc/board-mx31ads.h +++ b/include/asm-arm/arch-mxc/board-mx31ads.h @@ -109,4 +109,9 @@ #define MXC_MAX_EXP_IO_LINES 16 +/* mandatory for CONFIG_LL_DEBUG */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + #endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S new file mode 100644 index 000000000000..34befbb2ea42 --- /dev/null +++ b/include/asm-arm/arch-mxc/debug-macro.S @@ -0,0 +1,38 @@ +/* linux/include/asm-arm/arch-imx/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include + +#ifdef CONFIG_MACH_MX31ADS +#include +#endif + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =MXC_LL_UART_PADDR @ physical + ldrne \rx, =MXC_LL_UART_VADDR @ virtual + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0x40] @ TXDATA + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #0x98] @ SR2 + tst \rd, #1 << 3 @ TXDC + beq 1002b @ wait until transmit done + .endm -- cgit v1.2.3 From 1b53218bfa4c0e17fc16ff7fadb85b82bbd3c77c Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:51 +0200 Subject: i.MX3: Add a basic default config for the imx31ads (reference only) Currently there is a mx31ads BSP file in the kernel, but no default config file. This patch adds a basic default config for the imx31ads but it is for test purposes only to ensure the i.MX2 patch stack doesn't break the i.MX3. Note: For reference only. This configuration is untested as I have no access to an mx31ads. Signed-off-by: Juergen Beisert --- arch/arm/configs/mx31ads_defconfig | 839 +++++++++++++++++++++++++++++++++++++ 1 file changed, 839 insertions(+) create mode 100644 arch/arm/configs/mx31ads_defconfig diff --git a/arch/arm/configs/mx31ads_defconfig b/arch/arm/configs/mx31ads_defconfig new file mode 100644 index 000000000000..e05271753e15 --- /dev/null +++ b/arch/arm/configs/mx31ads_defconfig @@ -0,0 +1,839 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc6 +# Fri Jun 20 16:21:11 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Freescale MXC Implementations +# +# CONFIG_ARCH_MX2 is not set +CONFIG_ARCH_MX3=y + +# +# MX3 Options +# +CONFIG_MACH_MX31ADS=y +# CONFIG_MACH_PCM037 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3 From ce8ffef0bfd6e55d5da3923d8e9af27c3b5c4eff Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:52 +0200 Subject: MX31: add basic pcm037 board support This patch adds basic board support for phytecs pmc037 board. Signed-off-by: Sascha Hauer --- arch/arm/configs/pcm037_defconfig | 748 ++++++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 6 + arch/arm/mach-mx3/Makefile | 1 + arch/arm/mach-mx3/pcm037.c | 130 ++++++ include/asm-arm/arch-mxc/board-pcm037.h | 27 ++ include/asm-arm/arch-mxc/debug-macro.S | 3 + 6 files changed, 915 insertions(+) create mode 100644 arch/arm/configs/pcm037_defconfig create mode 100644 arch/arm/mach-mx3/pcm037.c create mode 100644 include/asm-arm/arch-mxc/board-pcm037.h diff --git a/arch/arm/configs/pcm037_defconfig b/arch/arm/configs/pcm037_defconfig new file mode 100644 index 000000000000..627474586470 --- /dev/null +++ b/arch/arm/configs/pcm037_defconfig @@ -0,0 +1,748 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc6 +# Wed Jun 25 11:52:42 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Freescale MXC Implementations +# +CONFIG_ARCH_MX3=y + +# +# MX3 Options +# +# CONFIG_MACH_MX31ADS is not set +CONFIG_MACH_PCM037=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +# CONFIG_MTD_CFI_NOSWAP is not set +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 5fe8606cac08..8b7b49a92923 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -8,5 +8,11 @@ config MACH_MX31ADS Include support for MX31ADS platform. This includes specific configurations for the board and its peripherals. +config MACH_PCM037 + bool "Support Phytec pcm037 platforms" + help + Include support for Phytec pcm037 platform. This includes + specific configurations for the board and its peripherals. + endmenu diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 562c75d2e379..b09ca608349c 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -6,3 +6,4 @@ obj-y := mm.o clock.o devices.o iomux.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o +obj-$(CONFIG_MACH_PCM037) += pcm037.o diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c new file mode 100644 index 000000000000..a34ae6de266f --- /dev/null +++ b/arch/arm/mach-mx3/pcm037.c @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2008 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct physmap_flash_data pcm037_flash_data = { + .width = 2, +}; + +static struct resource pcm037_flash_resource = { + .start = 0xa0000000, + .end = 0xa1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pcm037_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &pcm037_flash_data, + }, + .resource = &pcm037_flash_resource, + .num_resources = 1, +}; + +static struct imxuart_platform_data uart_pdata = { + .flags = 0, +}; + +static struct platform_device *devices[] __initdata = { + &pcm037_flash, +}; + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); + + mxc_iomux_mode(MX31_PIN_CTS1__CTS1); + mxc_iomux_mode(MX31_PIN_RTS1__RTS1); + mxc_iomux_mode(MX31_PIN_TXD1__TXD1); + mxc_iomux_mode(MX31_PIN_RXD1__RXD1); + + imx_init_uart(0, &uart_pdata); + + mxc_iomux_mode(MX31_PIN_CSPI3_MOSI__RXD3); + mxc_iomux_mode(MX31_PIN_CSPI3_MISO__TXD3); + + imx_init_uart(2, &uart_pdata); +} + +/* + * This structure defines static mappings for the pcm037 board. + */ +static struct map_desc pcm037_io_desc[] __initdata = { + { + .virtual = AIPS1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), + .length = AIPS1_SIZE, + .type = MT_DEVICE + }, { + .virtual = AIPS2_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), + .length = AIPS2_SIZE, + .type = MT_DEVICE + }, +}; + +/* + * Set up static virtual mappings. + */ +void __init pcm037_map_io(void) +{ + mxc_map_io(); + iotable_init(pcm037_io_desc, ARRAY_SIZE(pcm037_io_desc)); +} + +static void __init pcm037_timer_init(void) +{ + mxc_clocks_init(26000000); + mxc_timer_init("ipg_clk.0"); +} + +struct sys_timer pcm037_timer = { + .init = pcm037_timer_init, +}; + +MACHINE_START(PCM037, "Phytec Phycore pcm037") + /* Maintainer: Pengutronix */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = pcm037_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &pcm037_timer, +MACHINE_END + diff --git a/include/asm-arm/arch-mxc/board-pcm037.h b/include/asm-arm/arch-mxc/board-pcm037.h new file mode 100644 index 000000000000..82232ba3c8fc --- /dev/null +++ b/include/asm-arm/arch-mxc/board-pcm037.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2008 Sascha Hauer, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__ +#define __ASM_ARCH_MXC_BOARD_PCM037_H__ + +/* mandatory for CONFIG_LL_DEBUG */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */ diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S index 34befbb2ea42..81caa0aacfef 100644 --- a/include/asm-arm/arch-mxc/debug-macro.S +++ b/include/asm-arm/arch-mxc/debug-macro.S @@ -15,6 +15,9 @@ #ifdef CONFIG_MACH_MX31ADS #include +#endif +#ifdef CONFIG_MACH_PCM037 +#include #endif .macro addruart,rx -- cgit v1.2.3 From 9a4cd7a5c836e189a1712c9ffd2d76b2302ce212 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Sat, 5 Jul 2008 10:02:53 +0200 Subject: MX3: Add basic support for LogicPD i.MX31 LiteKit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds basic support for i.MX31 LiteKit by LogicPD. With printascii() in kernel/printk.c, it boots right into the rootfs-panic. Note: This is a modified version of Daniel's patch to fit into this patch stack. > On 09.06.2008, at 17:26, Russell King - ARM Linux wrote: > > > I would much prefer it if board specific includes were included by the > > code which needs them rather than in asm/arch/hardware.h.  With the > > device model, drivers shouldn't need to include any board specific > > includes - only the board specific C file should need it. > > The new version of this patch (#5102) has been uploaded to the patch > tracker this morning. Signed-off-by: Daniel Mack -- arch/arm/configs/mx31litekit_defconfig | 1100 ++++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 7 arch/arm/mach-mx3/Makefile | 1 arch/arm/mach-mx3/mx31lite.c | 96 ++ include/asm-arm/arch-mxc/board-mx31lite.h | 38 + include/asm-arm/arch-mxc/debug-macro.S | 3 6 files changed, 1245 insertions(+) --- arch/arm/configs/mx31litekit_defconfig | 1100 +++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 7 + arch/arm/mach-mx3/Makefile | 1 + arch/arm/mach-mx3/mx31lite.c | 96 +++ include/asm-arm/arch-mxc/board-mx31lite.h | 38 + include/asm-arm/arch-mxc/debug-macro.S | 3 + 6 files changed, 1245 insertions(+) create mode 100644 arch/arm/configs/mx31litekit_defconfig create mode 100644 arch/arm/mach-mx3/mx31lite.c create mode 100644 include/asm-arm/arch-mxc/board-mx31lite.h diff --git a/arch/arm/configs/mx31litekit_defconfig b/arch/arm/configs/mx31litekit_defconfig new file mode 100644 index 000000000000..4f41c4135685 --- /dev/null +++ b/arch/arm/configs/mx31litekit_defconfig @@ -0,0 +1,1100 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc5 +# Fri Jun 13 14:23:39 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +# CONFIG_GENERIC_GPIO is not set +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Freescale MXC Implementations +# +CONFIG_ARCH_MX3=y + +# +# MX3 Options +# +# CONFIG_MACH_MX31ADS is not set +CONFIG_MACH_MX31LITE=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +# CONFIG_CPU_32v6K is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +# CONFIG_PCMCIA is not set + +# +# PC-card bridges +# + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 8b7b49a92923..db9431dee1b4 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -14,5 +14,12 @@ config MACH_PCM037 Include support for Phytec pcm037 platform. This includes specific configurations for the board and its peripherals. +config MACH_MX31LITE + bool "Support MX31 LITEKIT (LogicPD)" + default n + help + Include support for MX31 LITEKIT platform. This includes specific + configurations for the board and its peripherals. + endmenu diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index b09ca608349c..8b21abb71fb0 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -6,4 +6,5 @@ obj-y := mm.o clock.o devices.o iomux.o obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o +obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o obj-$(CONFIG_MACH_PCM037) += pcm037.o diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c new file mode 100644 index 000000000000..ea23a8ec6850 --- /dev/null +++ b/arch/arm/mach-mx3/mx31lite.c @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * This file contains the board-specific initialization routines. + */ + +/* + * This structure defines the MX31 memory map. + */ +static struct map_desc mx31lite_io_desc[] __initdata = { + { + .virtual = AIPS1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS1_BASE_ADDR), + .length = AIPS1_SIZE, + .type = MT_NONSHARED_DEVICE + }, { + .virtual = SPBA0_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(SPBA0_BASE_ADDR), + .length = SPBA0_SIZE, + .type = MT_NONSHARED_DEVICE + }, { + .virtual = AIPS2_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPS2_BASE_ADDR), + .length = AIPS2_SIZE, + .type = MT_NONSHARED_DEVICE + }, { + .virtual = CS4_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(CS4_BASE_ADDR), + .length = CS4_SIZE, + .type = MT_DEVICE + } +}; + +/* + * Set up static virtual mappings. + */ +void __init mx31lite_map_io(void) +{ + mxc_map_io(); + iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc)); +} + +/* + * Board specific initialization. + */ +static void __init mxc_board_init(void) +{ +} + +/* + * The following uses standard kernel macros defined in arch.h in order to + * initialize __mach_desc_MX31LITE data structure. + */ + +MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT") + /* Maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPS1_BASE_ADDR, + .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx31lite_map_io, + .init_irq = mxc_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END diff --git a/include/asm-arm/arch-mxc/board-mx31lite.h b/include/asm-arm/arch-mxc/board-mx31lite.h new file mode 100644 index 000000000000..e4e5cf5ad7db --- /dev/null +++ b/include/asm-arm/arch-mxc/board-mx31lite.h @@ -0,0 +1,38 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__ +#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__ + +#define MXC_MAX_EXP_IO_LINES 16 + + +/* + * Memory Size parameters + */ + +/* + * Size of SDRAM memory + */ +#define SDRAM_MEM_SIZE SZ_128M +/* + * Size of MBX buffer memory + */ +#define MXC_MBX_MEM_SIZE SZ_16M +/* + * Size of memory available to kernel + */ +#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE) + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR) + +#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ + diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S index 81caa0aacfef..5add48b6665d 100644 --- a/include/asm-arm/arch-mxc/debug-macro.S +++ b/include/asm-arm/arch-mxc/debug-macro.S @@ -18,6 +18,9 @@ #endif #ifdef CONFIG_MACH_PCM037 #include +#endif +#ifdef CONFIG_MACH_MX31LITE +#include #endif .macro addruart,rx -- cgit v1.2.3 From 9e8a30dce1bd38cf7b941c707da504d28a907f5c Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:53 +0200 Subject: MX3: Adapt mx31lite to new timer init style This patch converts the external "add_mx31lite-basic_defconfig.diff" to our MXC implementation. Note: This patch fixes a board reference only. Signed-off-by: Juergen Beisert --- arch/arm/mach-mx3/mx31lite.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c index ea23a8ec6850..1372c1a1fc3f 100644 --- a/arch/arm/mach-mx3/mx31lite.c +++ b/arch/arm/mach-mx3/mx31lite.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -79,6 +80,16 @@ static void __init mxc_board_init(void) { } +static void __init mx31lite_timer_init(void) +{ + mxc_clocks_init(26000000); + mxc_timer_init("ipg_clk.0"); +} + +struct sys_timer mx31lite_timer = { + .init = mx31lite_timer_init, +}; + /* * The following uses standard kernel macros defined in arch.h in order to * initialize __mach_desc_MX31LITE data structure. @@ -92,5 +103,5 @@ MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT") .map_io = mx31lite_map_io, .init_irq = mxc_init_irq, .init_machine = mxc_board_init, - .timer = &mxc_timer, + .timer = &mx31lite_timer, MACHINE_END -- cgit v1.2.3 From 259bcaae9a2f28d7e3303b202b64a1fb0a9ab9e4 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:54 +0200 Subject: MXC arch: Simplify architecture's irq sources Simplify architecture's irq headers and sources, to share these files between MXC3 and MXC2. Signed-off-by: Juergen Beisert --- arch/arm/plat-mxc/irq.c | 67 +++++++++++++++++++++++++++++++---------- include/asm-arm/arch-mxc/irqs.h | 13 -------- include/asm-arm/arch-mxc/mx31.h | 2 ++ include/asm-arm/arch-mxc/mxc.h | 38 ----------------------- 4 files changed, 53 insertions(+), 67 deletions(-) diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c index 88f0cfababda..1fbe01da6925 100644 --- a/arch/arm/plat-mxc/irq.c +++ b/arch/arm/plat-mxc/irq.c @@ -1,24 +1,59 @@ /* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. */ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include +#include #include -#include -#include #include +#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR) +#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */ +#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */ +#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */ +#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */ +#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */ +#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */ +#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */ +#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */ +#define AVIC_NIPRIORITY7 (AVIC_BASE + 0x20) /* norm int priority lvl7 */ +#define AVIC_NIPRIORITY6 (AVIC_BASE + 0x24) /* norm int priority lvl6 */ +#define AVIC_NIPRIORITY5 (AVIC_BASE + 0x28) /* norm int priority lvl5 */ +#define AVIC_NIPRIORITY4 (AVIC_BASE + 0x2C) /* norm int priority lvl4 */ +#define AVIC_NIPRIORITY3 (AVIC_BASE + 0x30) /* norm int priority lvl3 */ +#define AVIC_NIPRIORITY2 (AVIC_BASE + 0x34) /* norm int priority lvl2 */ +#define AVIC_NIPRIORITY1 (AVIC_BASE + 0x38) /* norm int priority lvl1 */ +#define AVIC_NIPRIORITY0 (AVIC_BASE + 0x3C) /* norm int priority lvl0 */ +#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */ +#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */ +#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */ +#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */ +#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */ +#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */ +#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */ +#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */ +#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */ +#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */ + +#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20) +#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24) +#define IIM_PROD_REV_SH 3 +#define IIM_PROD_REV_LEN 5 + /* Disable interrupt number "irq" in the AVIC */ static void mxc_mask_irq(unsigned int irq) { @@ -32,7 +67,7 @@ static void mxc_unmask_irq(unsigned int irq) } static struct irq_chip mxc_avic_chip = { - .mask_ack = mxc_mask_irq, + .ack = mxc_mask_irq, .mask = mxc_mask_irq, .unmask = mxc_unmask_irq, }; diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h index b2c5205e1962..f416130718cf 100644 --- a/include/asm-arm/arch-mxc/irqs.h +++ b/include/asm-arm/arch-mxc/irqs.h @@ -13,17 +13,4 @@ #include -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) - -#define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_GPIO_INT_BASE) -#define MXC_GPIO_TO_IRQ(x) (MXC_GPIO_INT_BASE + x) - -/* Number of normal interrupts */ -#define NR_IRQS (MXC_MAX_INT_LINES + \ - MXC_MAX_GPIO_LINES + \ - MXC_MAX_VIRTUAL_INTS) - -/* Number of fast interrupts */ -#define NR_FIQS MXC_MAX_INTS - #endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h index 98e6a4cd1ea9..a7373e4a56cb 100644 --- a/include/asm-arm/arch-mxc/mx31.h +++ b/include/asm-arm/arch-mxc/mx31.h @@ -320,6 +320,8 @@ #define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM) #define MXC_MAX_VIRTUAL_INTS 16 +#define NR_IRQS (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES + MXC_MAX_VIRTUAL_INTS) + /*! * Number of GPIO port as defined in the IC Spec */ diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h index 1df4e2f24920..3e1c4ded18e2 100644 --- a/include/asm-arm/arch-mxc/mxc.h +++ b/include/asm-arm/arch-mxc/mxc.h @@ -29,42 +29,4 @@ # define cpu_is_mx31() (0) #endif -/* - ***************************************** - * AVIC Registers * - ***************************************** - */ -#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR) -#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */ -#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */ -#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */ -#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */ -#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */ -#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */ -#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */ -#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */ -#define AVIC_NIPRIORITY7 (AVIC_BASE + 0x20) /* norm int priority lvl7 */ -#define AVIC_NIPRIORITY6 (AVIC_BASE + 0x24) /* norm int priority lvl6 */ -#define AVIC_NIPRIORITY5 (AVIC_BASE + 0x28) /* norm int priority lvl5 */ -#define AVIC_NIPRIORITY4 (AVIC_BASE + 0x2C) /* norm int priority lvl4 */ -#define AVIC_NIPRIORITY3 (AVIC_BASE + 0x30) /* norm int priority lvl3 */ -#define AVIC_NIPRIORITY2 (AVIC_BASE + 0x34) /* norm int priority lvl2 */ -#define AVIC_NIPRIORITY1 (AVIC_BASE + 0x38) /* norm int priority lvl1 */ -#define AVIC_NIPRIORITY0 (AVIC_BASE + 0x3C) /* norm int priority lvl0 */ -#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */ -#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */ -#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */ -#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */ -#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */ -#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */ -#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */ -#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */ -#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */ -#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */ - -#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20) -#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24) -#define IIM_PROD_REV_SH 3 -#define IIM_PROD_REV_LEN 5 - #endif /* __ASM_ARCH_MXC_H__ */ -- cgit v1.2.3 From aa10abd381b9493a88f6b9e111adc79e33d548fa Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:55 +0200 Subject: i.MX2 family: Add GPIO multiplexing support This patch adds GPIO multiplexing support for the imx1/mxc2 family of procesors. Signed-off-by: Juergen Beisert --- arch/arm/plat-mxc/Makefile | 2 + arch/arm/plat-mxc/iomux-mx1-mx2.c | 156 +++++++++++++ include/asm-arm/arch-mxc/iomux-mx1-mx2.h | 372 +++++++++++++++++++++++++++++++ 3 files changed, 530 insertions(+) create mode 100644 arch/arm/plat-mxc/iomux-mx1-mx2.c create mode 100644 include/asm-arm/arch-mxc/iomux-mx1-mx2.h diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index e3cc25c6d46f..db66e9ae8414 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -4,3 +4,5 @@ # Common support obj-y := irq.o clock.o gpio.o time.o + +obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c new file mode 100644 index 000000000000..1985571eb40c --- /dev/null +++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c @@ -0,0 +1,156 @@ +/* + * arch/arm/mach-mxc/generic.c + * + * author: Sascha Hauer + * Created: april 20th, 2004 + * Copyright: Synertronixx GmbH + * + * Common code for i.MX machines + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +void mxc_gpio_mode(int gpio_mode) +{ + unsigned int pin = gpio_mode & GPIO_PIN_MASK; + unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; + unsigned int tmp; + + /* Pullup enable */ + tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port)); + if (gpio_mode & GPIO_PUEN) + tmp |= (1 << pin); + else + tmp &= ~(1 << pin); + __raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port)); + + /* Data direction */ + tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port)); + if (gpio_mode & GPIO_OUT) + tmp |= 1 << pin; + else + tmp &= ~(1 << pin); + __raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port)); + + /* Primary / alternate function */ + tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port)); + if (gpio_mode & GPIO_AF) + tmp |= (1 << pin); + else + tmp &= ~(1 << pin); + __raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port)); + + /* use as gpio? */ + tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port)); + if (gpio_mode & (GPIO_PF | GPIO_AF)) + tmp &= ~(1 << pin); + else + tmp |= (1 << pin); + __raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port)); + + if (pin < 16) { + tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port)); + tmp &= ~(3 << (pin * 2)); + tmp |= (ocr << (pin * 2)); + __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port)); + + tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port)); + tmp &= ~(3 << (pin * 2)); + tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); + __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port)); + + tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port)); + tmp &= ~(3 << (pin * 2)); + tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); + __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port)); + } else { + pin -= 16; + + tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port)); + tmp &= ~(3 << (pin * 2)); + tmp |= (ocr << (pin * 2)); + __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port)); + + tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port)); + tmp &= ~(3 << (pin * 2)); + tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2); + __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port)); + + tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port)); + tmp &= ~(3 << (pin * 2)); + tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); + __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port)); + } +} +EXPORT_SYMBOL(mxc_gpio_mode); + +int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + int alloc_mode, const char *label) +{ + const int *p = pin_list; + int i; + unsigned gpio; + unsigned mode; + + for (i = 0; i < count; i++) { + gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); + mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK); + + if (gpio >= (GPIO_PORT_MAX + 1) * 32) + goto setup_error; + + if (alloc_mode & MXC_GPIO_ALLOC_MODE_RELEASE) + gpio_free(gpio); + else if (!(alloc_mode & MXC_GPIO_ALLOC_MODE_NO_ALLOC)) + if (gpio_request(gpio, label) + && !(alloc_mode & MXC_GPIO_ALLOC_MODE_TRY_ALLOC)) + goto setup_error; + + if (!(alloc_mode & (MXC_GPIO_ALLOC_MODE_ALLOC_ONLY | + MXC_GPIO_ALLOC_MODE_RELEASE))) + mxc_gpio_mode(gpio | mode); + + p++; + } + return 0; + +setup_error: + if (alloc_mode & (MXC_GPIO_ALLOC_MODE_NO_ALLOC | + MXC_GPIO_ALLOC_MODE_TRY_ALLOC)) + return -EINVAL; + + while (p != pin_list) { + p--; + gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK); + gpio_free(gpio); + } + + return -EINVAL; +} +EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); + diff --git a/include/asm-arm/arch-mxc/iomux-mx1-mx2.h b/include/asm-arm/arch-mxc/iomux-mx1-mx2.h new file mode 100644 index 000000000000..076d37b38eb2 --- /dev/null +++ b/include/asm-arm/arch-mxc/iomux-mx1-mx2.h @@ -0,0 +1,372 @@ +/* + * Copyright (C) 2008 by Sascha Hauer + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef _MXC_GPIO_MX1_MX2_H +#define _MXC_GPIO_MX1_MX2_H + +#include + +#define MXC_GPIO_ALLOC_MODE_NORMAL 0 +#define MXC_GPIO_ALLOC_MODE_NO_ALLOC 1 +#define MXC_GPIO_ALLOC_MODE_TRY_ALLOC 2 +#define MXC_GPIO_ALLOC_MODE_ALLOC_ONLY 4 +#define MXC_GPIO_ALLOC_MODE_RELEASE 8 + +/* + * GPIO Module and I/O Multiplexer + * x = 0..3 for reg_A, reg_B, reg_C, reg_D + */ +#define VA_GPIO_BASE IO_ADDRESS(GPIO_BASE_ADDR) +#define MXC_DDIR(x) (0x00 + ((x) << 8)) +#define MXC_OCR1(x) (0x04 + ((x) << 8)) +#define MXC_OCR2(x) (0x08 + ((x) << 8)) +#define MXC_ICONFA1(x) (0x0c + ((x) << 8)) +#define MXC_ICONFA2(x) (0x10 + ((x) << 8)) +#define MXC_ICONFB1(x) (0x14 + ((x) << 8)) +#define MXC_ICONFB2(x) (0x18 + ((x) << 8)) +#define MXC_DR(x) (0x1c + ((x) << 8)) +#define MXC_GIUS(x) (0x20 + ((x) << 8)) +#define MXC_SSR(x) (0x24 + ((x) << 8)) +#define MXC_ICR1(x) (0x28 + ((x) << 8)) +#define MXC_ICR2(x) (0x2c + ((x) << 8)) +#define MXC_IMR(x) (0x30 + ((x) << 8)) +#define MXC_ISR(x) (0x34 + ((x) << 8)) +#define MXC_GPR(x) (0x38 + ((x) << 8)) +#define MXC_SWR(x) (0x3c + ((x) << 8)) +#define MXC_PUEN(x) (0x40 + ((x) << 8)) + +#ifdef CONFIG_ARCH_MX1 +# define GPIO_PORT_MAX 3 +#endif +#ifdef CONFIG_ARCH_MX2 +# define GPIO_PORT_MAX 5 +#endif + +#ifndef GPIO_PORT_MAX +# error "GPIO config port count unknown!" +#endif + +#define GPIO_PIN_MASK 0x1f + +#define GPIO_PORT_SHIFT 5 +#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) + +#define GPIO_PORTA (0 << GPIO_PORT_SHIFT) +#define GPIO_PORTB (1 << GPIO_PORT_SHIFT) +#define GPIO_PORTC (2 << GPIO_PORT_SHIFT) +#define GPIO_PORTD (3 << GPIO_PORT_SHIFT) +#define GPIO_PORTE (4 << GPIO_PORT_SHIFT) +#define GPIO_PORTF (5 << GPIO_PORT_SHIFT) + +#define GPIO_OUT (1 << 8) +#define GPIO_IN (0 << 8) +#define GPIO_PUEN (1 << 9) + +#define GPIO_PF (1 << 10) +#define GPIO_AF (1 << 11) + +#define GPIO_OCR_SHIFT 12 +#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT) +#define GPIO_AIN (0 << GPIO_OCR_SHIFT) +#define GPIO_BIN (1 << GPIO_OCR_SHIFT) +#define GPIO_CIN (2 << GPIO_OCR_SHIFT) +#define GPIO_GPIO (3 << GPIO_OCR_SHIFT) + +#define GPIO_AOUT_SHIFT 14 +#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT (0 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_0 (2 << GPIO_AOUT_SHIFT) +#define GPIO_AOUT_1 (3 << GPIO_AOUT_SHIFT) + +#define GPIO_BOUT_SHIFT 16 +#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT (0 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_ISR (1 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) +#define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) + +extern void mxc_gpio_mode(int gpio_mode); +extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, + int alloc_mode, const char *label); + +/*-------------------------------------------------------------------------*/ + +/* assignements for GPIO alternate/primary functions */ + +/* FIXME: This list is not completed. The correct directions are + * missing on some (many) pins + */ +#ifdef CONFIG_ARCH_MX1 +#define PA0_AIN_SPI2_CLK (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0) +#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) +#define PA1_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1) +#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) +#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2) +#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) +#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) +#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) +#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) +#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) +#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) +#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) +#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) +#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) +#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) +#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) +#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) +#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15) +#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16) +#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) +#define PA17_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17) +#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) +#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) +#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) +#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) +#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) +#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) +#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) +#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) +#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) +#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) +#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) +#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) +#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) +#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) +#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) +#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) +#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) +#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) +#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) +#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) +#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) +#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) +#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) +#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) +#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) +#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) +#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) +#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) +#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) +#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) +#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) +#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) +#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) +#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) +#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) +#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) +#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_IN | GPIO_AF | 16) +#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17) +#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) +#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) +#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) +#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) +#define PB22_PFUSBD_RCV (GPIO_PORTB | GPIO_PF | 22) +#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) +#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) +#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) +#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) +#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) +#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28) +#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 29) +#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30) +#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_IN | GPIO_PF | 31) +#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) +#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) +#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_IN | GPIO_PF | 5) +#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6) +#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) +#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) +#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9) +#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_IN | GPIO_PF | 10) +#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11) +#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 12) +#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) +#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) +#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) +#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) +#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) +#define PC24_BIN_UART3_RI (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24) +#define PC25_BIN_UART3_DSR (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25) +#define PC26_AOUT_UART3_DTR (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26) +#define PC27_BIN_UART3_DCD (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27) +#define PC28_BIN_UART3_CTS (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28) +#define PC29_AOUT_UART3_RTS (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29) +#define PC30_BIN_UART3_TX (GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30) +#define PC31_AOUT_UART3_RX (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) +#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6) +#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) +#define PD7_AF_UART2_DTR (GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7) +#define PD7_AIN_SPI2_SCLK (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7) +#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) +#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8) +#define PD8_AIN_SPI2_SS (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8) +#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) +#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9) +#define PD9_AOUT_SPI2_RXD (GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9) +#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10) +#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10) +#define PD10_AIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10) +#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11) +#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12) +#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13) +#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14) +#define PD15_PF_LD0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15) +#define PD16_PF_LD1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16) +#define PD17_PF_LD2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17) +#define PD18_PF_LD3 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18) +#define PD19_PF_LD4 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19) +#define PD20_PF_LD5 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20) +#define PD21_PF_LD6 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21) +#define PD22_PF_LD7 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22) +#define PD23_PF_LD8 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23) +#define PD24_PF_LD9 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24) +#define PD25_PF_LD10 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25) +#define PD26_PF_LD11 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26) +#define PD27_PF_LD12 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27) +#define PD28_PF_LD13 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28) +#define PD29_PF_LD14 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29) +#define PD30_PF_LD15 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30) +#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) +#define PD31_BIN_SPI2_TXD (GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31) +#endif + +#ifdef CONFIG_ARCH_MX2 +#define PA5_PF_LSCLK (GPIO_PORTA | GPIO_OUT | GPIO_PF | 5) +#define PA6_PF_LD0 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 6) +#define PA7_PF_LD1 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 7) +#define PA8_PF_LD2 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 8) +#define PA9_PF_LD3 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 9) +#define PA10_PF_LD4 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 10) +#define PA11_PF_LD5 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 11) +#define PA12_PF_LD6 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 12) +#define PA13_PF_LD7 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 13) +#define PA14_PF_LD8 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 14) +#define PA15_PF_LD9 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15) +#define PA16_PF_LD10 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16) +#define PA17_PF_LD11 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 17) +#define PA18_PF_LD12 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 18) +#define PA19_PF_LD13 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 19) +#define PA20_PF_LD14 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 20) +#define PA21_PF_LD15 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 21) +#define PA22_PF_LD16 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 22) +#define PA23_PF_LD17 (GPIO_PORTA | GPIO_OUT | GPIO_PF | 23) +#define PA24_PF_REV (GPIO_PORTA | GPIO_OUT | GPIO_PF | 24) +#define PA25_PF_CLS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 25) +#define PA26_PF_PS (GPIO_PORTA | GPIO_OUT | GPIO_PF | 26) +#define PA27_PF_SPL_SPR (GPIO_PORTA | GPIO_OUT | GPIO_PF | 27) +#define PA28_PF_HSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 28) +#define PA29_PF_VSYNC (GPIO_PORTA | GPIO_OUT | GPIO_PF | 29) +#define PA30_PF_CONTRAST (GPIO_PORTA | GPIO_OUT | GPIO_PF | 30) +#define PA31_PF_OE_ACD (GPIO_PORTA | GPIO_OUT | GPIO_PF | 31) +#define PB10_PF_CSI_D0 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 10) +#define PB10_AF_UART6_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 10) +#define PB11_PF_CSI_D1 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 11) +#define PB11_AF_UART6_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 11) +#define PB12_PF_CSI_D2 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 12) +#define PB12_AF_UART6_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 12) +#define PB13_PF_CSI_D3 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 13) +#define PB13_AF_UART6_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 13) +#define PB14_PF_CSI_D4 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 14) +#define PB15_PF_CSI_MCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 15) +#define PB16_PF_CSI_PIXCLK (GPIO_PORTB | GPIO_OUT | GPIO_PF | 16) +#define PB17_PF_CSI_D5 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 17) +#define PB18_PF_CSI_D6 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 18) +#define PB18_AF_UART5_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 18) +#define PB19_PF_CSI_D7 (GPIO_PORTB | GPIO_OUT | GPIO_PF | 19) +#define PB19_AF_UART5_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 19) +#define PB20_PF_CSI_VSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 20) +#define PB20_AF_UART5_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 20) +#define PB21_PF_CSI_HSYNC (GPIO_PORTB | GPIO_OUT | GPIO_PF | 21) +#define PB21_AF_UART5_RTS (GPIO_PORTB | GPIO_IN | GPIO_AF | 21) +#define PB26_AF_UART4_RTS (GPIO_PORTB | GPIO_IN | GPIO_PF | 26) +#define PB28_AF_UART4_TXD (GPIO_PORTB | GPIO_OUT | GPIO_AF | 28) +#define PB29_AF_UART4_CTS (GPIO_PORTB | GPIO_OUT | GPIO_AF | 29) +#define PB31_AF_UART4_RXD (GPIO_PORTB | GPIO_IN | GPIO_AF | 31) +#define PC5_PF_I2C2_SDA (GPIO_PORTC | GPIO_IN | GPIO_PF | 5) +#define PC6_PF_I2C2_SCL (GPIO_PORTC | GPIO_IN | GPIO_PF | 6) +#define PC16_PF_SSI4_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 16) +#define PC17_PF_SSI4_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 17) +#define PC18_PF_SSI4_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 18) +#define PC19_PF_SSI4_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 19) +#define PC20_PF_SSI1_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 20) +#define PC21_PF_SSI1_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 21) +#define PC22_PF_SSI1_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 22) +#define PC23_PF_SSI1_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 23) +#define PC24_PF_SSI2_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 24) +#define PC25_PF_SSI2_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 25) +#define PC26_PF_SSI2_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 26) +#define PC27_PF_SSI2_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 27) +#define PC28_PF_SSI3_FS (GPIO_PORTC | GPIO_IN | GPIO_PF | 28) +#define PC29_PF_SSI3_RXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 29) +#define PC30_PF_SSI3_TXD (GPIO_PORTC | GPIO_IN | GPIO_PF | 30) +#define PC31_PF_SSI3_CLK (GPIO_PORTC | GPIO_IN | GPIO_PF | 31) +#define PD0_AIN_FEC_TXD0 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0) +#define PD1_AIN_FEC_TXD1 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1) +#define PD2_AIN_FEC_TXD2 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2) +#define PD3_AIN_FEC_TXD3 (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3) +#define PD4_AOUT_FEC_RX_ER (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4) +#define PD5_AOUT_FEC_RXD1 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5) +#define PD6_AOUT_FEC_RXD2 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6) +#define PD7_AOUT_FEC_RXD3 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7) +#define PD8_AF_FEC_MDIO (GPIO_PORTD | GPIO_IN | GPIO_AF | 8) +#define PD9_AIN_FEC_MDC (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9) +#define PD10_AOUT_FEC_CRS (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10) +#define PD11_AOUT_FEC_TX_CLK (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11) +#define PD12_AOUT_FEC_RXD0 (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12) +#define PD13_AOUT_FEC_RX_DV (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13) +#define PD14_AOUT_FEC_CLR (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14) +#define PD15_AOUT_FEC_COL (GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15) +#define PD16_AIN_FEC_TX_ER (GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16) +#define PD17_PF_I2C_DATA (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17) +#define PD18_PF_I2C_CLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18) +#define PD25_PF_CSPI1_RDY (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25) +#define PD26_PF_CSPI1_SS2 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26) +#define PD27_PF_CSPI1_SS1 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27) +#define PD28_PF_CSPI1_SS0 (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28) +#define PD29_PF_CSPI1_SCLK (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29) +#define PD30_PF_CSPI1_MISO (GPIO_PORTD | GPIO_IN | GPIO_PF | 30) +#define PD31_PF_CSPI1_MOSI (GPIO_PORTD | GPIO_OUT | GPIO_PF | 31) +#define PF23_AIN_FEC_TX_EN (GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23) +#define PE3_PF_UART2_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 3) +#define PE4_PF_UART2_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 4) +#define PE6_PF_UART2_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 6) +#define PE7_PF_UART2_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 7) +#define PE8_PF_UART3_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 8) +#define PE9_PF_UART3_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 9) +#define PE10_PF_UART3_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 10) +#define PE11_PF_UART3_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 11) +#define PE12_PF_UART1_TXD (GPIO_PORTE | GPIO_OUT | GPIO_PF | 12) +#define PE13_PF_UART1_RXD (GPIO_PORTE | GPIO_IN | GPIO_PF | 13) +#define PE14_PF_UART1_CTS (GPIO_PORTE | GPIO_OUT | GPIO_PF | 14) +#define PE15_PF_UART1_RTS (GPIO_PORTE | GPIO_IN | GPIO_PF | 15) +#define PE18_AF_CSPI3_MISO (GPIO_PORTE | GPIO_IN | GPIO_AF | 18) +#define PE21_AF_CSPI3_SS (GPIO_PORTE | GPIO_OUT | GPIO_AF | 21) +#define PE22_AF_CSPI3_MOSI (GPIO_PORTE | GPIO_OUT | GPIO_AF | 22) +#define PE23_AF_CSPI3_SCLK (GPIO_PORTE | GPIO_OUT | GPIO_AF | 23) +#endif + +/* decode irq number to use with IMR(x), ISR(x) and friends */ +#define IRQ_TO_REG(irq) ((irq - MXC_MAX_INT_LINES) >> 5) + +#define IRQ_GPIOA(x) (MXC_MAX_INT_LINES + x) +#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) +#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) +#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) + +#endif /* _MXC_GPIO_MX1_MX2_H */ -- cgit v1.2.3 From eea643f7ff04fe17c3ff71d41a9487c0753bd821 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:56 +0200 Subject: i.MX2 family: Add basic mach support (sources) This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. Signed-off-by: Juergen Beisert --- arch/arm/mach-mx2/Kconfig | 5 +++ arch/arm/mach-mx2/Makefile | 7 ++++ arch/arm/mach-mx2/Makefile.boot | 3 ++ arch/arm/mach-mx2/generic.c | 74 +++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-mx2/system.c | 63 +++++++++++++++++++++++++++++++++++ 5 files changed, 152 insertions(+) create mode 100644 arch/arm/mach-mx2/Kconfig create mode 100644 arch/arm/mach-mx2/Makefile create mode 100644 arch/arm/mach-mx2/Makefile.boot create mode 100644 arch/arm/mach-mx2/generic.c create mode 100644 arch/arm/mach-mx2/system.c diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig new file mode 100644 index 000000000000..23def05fea0e --- /dev/null +++ b/arch/arm/mach-mx2/Kconfig @@ -0,0 +1,5 @@ +comment "MX2 family CPU support" + depends on ARCH_MX2 + +comment "MX2 Platforms" + depends on ARCH_MX2 diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile new file mode 100644 index 000000000000..937192dc57a7 --- /dev/null +++ b/arch/arm/mach-mx2/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the linux kernel. +# + +# Object file lists. + +obj-y := system.o generic.o diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-mx2/Makefile.boot new file mode 100644 index 000000000000..696831dcd485 --- /dev/null +++ b/arch/arm/mach-mx2/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0xA0008000 +params_phys-y := 0xA0000100 +initrd_phys-y := 0xA0800000 diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c new file mode 100644 index 000000000000..07875cf00de9 --- /dev/null +++ b/arch/arm/mach-mx2/generic.c @@ -0,0 +1,74 @@ +/* + * generic.c + * + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +/* MX27 memory map definition */ +static struct map_desc mxc_io_desc[] __initdata = { + /* + * this fixed mapping covers: + * - AIPI1 + * - AIPI2 + * - AITC + * - ROM Patch + * - and some reserved space + */ + { + .virtual = AIPI_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(AIPI_BASE_ADDR), + .length = AIPI_SIZE, + .type = MT_DEVICE + }, + /* + * this fixed mapping covers: + * - CSI + * - ATA + */ + { + .virtual = SAHB1_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(SAHB1_BASE_ADDR), + .length = SAHB1_SIZE, + .type = MT_DEVICE + }, + /* + * this fixed mapping covers: + * - EMI + */ + { + .virtual = X_MEMC_BASE_ADDR_VIRT, + .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR), + .length = X_MEMC_SIZE, + .type = MT_DEVICE + } +}; + +/* + * Initialize the memory map. It is called during the + * system startup to create static physical to virtual + * memory map for the IO modules. + */ +void __init mxc_map_io(void) +{ + iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); +} diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c new file mode 100644 index 000000000000..99304645299d --- /dev/null +++ b/arch/arm/mach-mx2/system.c @@ -0,0 +1,63 @@ +/* + * Copyright (C) 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#include +#include +#include + +/* + * Put the CPU into idle mode. It is called by default_idle() + * in process.c file. + */ +void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks. + */ + cpu_do_idle(); +} + +#define WDOG_WCR_REG IO_ADDRESS(WDOG_BASE_ADDR) +#define WDOG_WCR_SRS (1 << 4) + +/* + * Reset the system. It is called by machine_restart(). + */ +void arch_reset(char mode) +{ + struct clk *clk; + + clk = clk_get(NULL, "wdog_clk"); + if (!clk) { + printk(KERN_ERR"Cannot activate the watchdog. Giving up\n"); + return; + } + + clk_enable(clk); + + /* Assert SRS signal */ + __raw_writew(__raw_readw(WDOG_WCR_REG) & ~WDOG_WCR_SRS, WDOG_WCR_REG); +} -- cgit v1.2.3 From 32dc80c9cb13a7ce686bcc26efcf39e35719b466 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:56 +0200 Subject: i.MX2 family: Add basic mach support (headers) This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. Signed-off-by: Juergen Beisert --- arch/arm/mach-mx2/crm_regs.h | 273 ++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-mxc/hardware.h | 3 + include/asm-arm/arch-mxc/iim.h | 77 ++++++++++ 3 files changed, 353 insertions(+) create mode 100644 arch/arm/mach-mx2/crm_regs.h create mode 100644 include/asm-arm/arch-mxc/iim.h diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h new file mode 100644 index 000000000000..a40a9b950ce9 --- /dev/null +++ b/arch/arm/mach-mx2/crm_regs.h @@ -0,0 +1,273 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__ +#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__ + +#include + +/* Register offsets */ +#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0) +#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4) +#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8) +#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC) +#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10) +#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14) +#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18) +#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c) +#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20) +#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24) +#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28) +#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c) +#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30) +#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34) + +#define CCM_CSCR_USB_OFFSET 28 +#define CCM_CSCR_USB_MASK (0x7 << 28) +#define CCM_CSCR_SD_OFFSET 24 +#define CCM_CSCR_SD_MASK (0x3 << 24) +#define CCM_CSCR_SSI2 (1 << 23) +#define CCM_CSCR_SSI2_OFFSET 23 +#define CCM_CSCR_SSI1 (1 << 22) +#define CCM_CSCR_SSI1_OFFSET 22 +#define CCM_CSCR_VPU (1 << 21) +#define CCM_CSCR_VPU_OFFSET 21 +#define CCM_CSCR_MSHC (1 << 20) +#define CCM_CSCR_SPLLRES (1 << 19) +#define CCM_CSCR_MPLLRES (1 << 18) +#define CCM_CSCR_SP (1 << 17) +#define CCM_CSCR_MCU (1 << 16) +/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/ +#define CCM_CSCR_ARM_SRC (1 << 15) +#define CCM_CSCR_ARM_OFFSET 12 +#define CCM_CSCR_ARM_MASK (0x3 << 12) +/* CCM_CSCR_ARM_xxx just be avaliable on i.MX27 TO2*/ +#define CCM_CSCR_PRESC_OFFSET 13 +#define CCM_CSCR_PRESC_MASK (0x7 << 13) +#define CCM_CSCR_BCLK_OFFSET 9 +#define CCM_CSCR_BCLK_MASK (0xf << 9) +#define CCM_CSCR_IPDIV_OFFSET 8 +#define CCM_CSCR_IPDIV (1 << 8) +/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/ +#define CCM_CSCR_AHB_OFFSET 8 +#define CCM_CSCR_AHB_MASK (0x3 << 8) +/* CCM_CSCR_AHB_xxx just be avaliable on i.MX27 TO2*/ +#define CCM_CSCR_OSC26MDIV (1 << 4) +#define CCM_CSCR_OSC26M (1 << 3) +#define CCM_CSCR_FPM (1 << 2) +#define CCM_CSCR_SPEN (1 << 1) +#define CCM_CSCR_MPEN 1 + +#define CCM_MPCTL0_CPLM (1 << 31) +#define CCM_MPCTL0_PD_OFFSET 26 +#define CCM_MPCTL0_PD_MASK (0xf << 26) +#define CCM_MPCTL0_MFD_OFFSET 16 +#define CCM_MPCTL0_MFD_MASK (0x3ff << 16) +#define CCM_MPCTL0_MFI_OFFSET 10 +#define CCM_MPCTL0_MFI_MASK (0xf << 10) +#define CCM_MPCTL0_MFN_OFFSET 0 +#define CCM_MPCTL0_MFN_MASK 0x3ff + +#define CCM_MPCTL1_LF (1 << 15) +#define CCM_MPCTL1_BRMO (1 << 6) + +#define CCM_SPCTL0_CPLM (1 << 31) +#define CCM_SPCTL0_PD_OFFSET 26 +#define CCM_SPCTL0_PD_MASK (0xf << 26) +#define CCM_SPCTL0_MFD_OFFSET 16 +#define CCM_SPCTL0_MFD_MASK (0x3ff << 16) +#define CCM_SPCTL0_MFI_OFFSET 10 +#define CCM_SPCTL0_MFI_MASK (0xf << 10) +#define CCM_SPCTL0_MFN_OFFSET 0 +#define CCM_SPCTL0_MFN_MASK 0x3ff + +#define CCM_SPCTL1_LF (1 << 15) +#define CCM_SPCTL1_BRMO (1 << 6) + +#define CCM_OSC26MCTL_PEAK_OFFSET 16 +#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16) +#define CCM_OSC26MCTL_AGC_OFFSET 8 +#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8) +#define CCM_OSC26MCTL_ANATEST_OFFSET 0 +#define CCM_OSC26MCTL_ANATEST_MASK 0x3f + +#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26 +#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26) +#define CCM_PCDR0_CLKO_EN 25 +#define CCM_PCDR0_CLKODIV_OFFSET 22 +#define CCM_PCDR0_CLKODIV_MASK (0x7 << 22) +#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16 +#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16) +/*The difinition for i.MX27 TO2*/ +#define CCM_PCDR0_VPUDIV2_OFFSET 10 +#define CCM_PCDR0_VPUDIV2_MASK (0x3f << 10) +#define CCM_PCDR0_NFCDIV2_OFFSET 6 +#define CCM_PCDR0_NFCDIV2_MASK (0xf << 6) +#define CCM_PCDR0_MSHCDIV2_MASK 0x3f +/*The difinition for i.MX27 TO2*/ +#define CCM_PCDR0_NFCDIV_OFFSET 12 +#define CCM_PCDR0_NFCDIV_MASK (0xf << 12) +#define CCM_PCDR0_VPUDIV_OFFSET 8 +#define CCM_PCDR0_VPUDIV_MASK (0xf << 8) +#define CCM_PCDR0_MSHCDIV_OFFSET 0 +#define CCM_PCDR0_MSHCDIV_MASK 0x1f + +#define CCM_PCDR1_PERDIV4_OFFSET 24 +#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24) +#define CCM_PCDR1_PERDIV3_OFFSET 16 +#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16) +#define CCM_PCDR1_PERDIV2_OFFSET 8 +#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8) +#define CCM_PCDR1_PERDIV1_OFFSET 0 +#define CCM_PCDR1_PERDIV1_MASK 0x3f + +#define CCM_PCCR0_CSPI1_OFFSET 31 +#define CCM_PCCR0_CSPI1_MASK (1 << 31) +#define CCM_PCCR0_CSPI2_OFFSET 30 +#define CCM_PCCR0_CSPI2_MASK (1 << 30) +#define CCM_PCCR0_CSPI3_OFFSET 29 +#define CCM_PCCR0_CSPI3_MASK (1 << 29) +#define CCM_PCCR0_DMA_OFFSET 28 +#define CCM_PCCR0_DMA_MASK (1 << 28) +#define CCM_PCCR0_EMMA_OFFSET 27 +#define CCM_PCCR0_EMMA_MASK (1 << 27) +#define CCM_PCCR0_FEC_OFFSET 26 +#define CCM_PCCR0_FEC_MASK (1 << 26) +#define CCM_PCCR0_GPIO_OFFSET 25 +#define CCM_PCCR0_GPIO_MASK (1 << 25) +#define CCM_PCCR0_GPT1_OFFSET 24 +#define CCM_PCCR0_GPT1_MASK (1 << 24) +#define CCM_PCCR0_GPT2_OFFSET 23 +#define CCM_PCCR0_GPT2_MASK (1 << 23) +#define CCM_PCCR0_GPT3_OFFSET 22 +#define CCM_PCCR0_GPT3_MASK (1 << 22) +#define CCM_PCCR0_GPT4_OFFSET 21 +#define CCM_PCCR0_GPT4_MASK (1 << 21) +#define CCM_PCCR0_GPT5_OFFSET 20 +#define CCM_PCCR0_GPT5_MASK (1 << 20) +#define CCM_PCCR0_GPT6_OFFSET 19 +#define CCM_PCCR0_GPT6_MASK (1 << 19) +#define CCM_PCCR0_I2C1_OFFSET 18 +#define CCM_PCCR0_I2C1_MASK (1 << 18) +#define CCM_PCCR0_I2C2_OFFSET 17 +#define CCM_PCCR0_I2C2_MASK (1 << 17) +#define CCM_PCCR0_IIM_OFFSET 16 +#define CCM_PCCR0_IIM_MASK (1 << 16) +#define CCM_PCCR0_KPP_OFFSET 15 +#define CCM_PCCR0_KPP_MASK (1 << 15) +#define CCM_PCCR0_LCDC_OFFSET 14 +#define CCM_PCCR0_LCDC_MASK (1 << 14) +#define CCM_PCCR0_MSHC_OFFSET 13 +#define CCM_PCCR0_MSHC_MASK (1 << 13) +#define CCM_PCCR0_OWIRE_OFFSET 12 +#define CCM_PCCR0_OWIRE_MASK (1 << 12) +#define CCM_PCCR0_PWM_OFFSET 11 +#define CCM_PCCR0_PWM_MASK (1 << 11) +#define CCM_PCCR0_RTC_OFFSET 9 +#define CCM_PCCR0_RTC_MASK (1 << 9) +#define CCM_PCCR0_RTIC_OFFSET 8 +#define CCM_PCCR0_RTIC_MASK (1 << 8) +#define CCM_PCCR0_SAHARA_OFFSET 7 +#define CCM_PCCR0_SAHARA_MASK (1 << 7) +#define CCM_PCCR0_SCC_OFFSET 6 +#define CCM_PCCR0_SCC_MASK (1 << 6) +#define CCM_PCCR0_SDHC1_OFFSET 5 +#define CCM_PCCR0_SDHC1_MASK (1 << 5) +#define CCM_PCCR0_SDHC2_OFFSET 4 +#define CCM_PCCR0_SDHC2_MASK (1 << 4) +#define CCM_PCCR0_SDHC3_OFFSET 3 +#define CCM_PCCR0_SDHC3_MASK (1 << 3) +#define CCM_PCCR0_SLCDC_OFFSET 2 +#define CCM_PCCR0_SLCDC_MASK (1 << 2) +#define CCM_PCCR0_SSI1_IPG_OFFSET 1 +#define CCM_PCCR0_SSI1_IPG_MASK (1 << 1) +#define CCM_PCCR0_SSI2_IPG_OFFSET 0 +#define CCM_PCCR0_SSI2_IPG_MASK (1 << 0) + +#define CCM_PCCR1_UART1_OFFSET 31 +#define CCM_PCCR1_UART1_MASK (1 << 31) +#define CCM_PCCR1_UART2_OFFSET 30 +#define CCM_PCCR1_UART2_MASK (1 << 30) +#define CCM_PCCR1_UART3_OFFSET 29 +#define CCM_PCCR1_UART3_MASK (1 << 29) +#define CCM_PCCR1_UART4_OFFSET 28 +#define CCM_PCCR1_UART4_MASK (1 << 28) +#define CCM_PCCR1_UART5_OFFSET 27 +#define CCM_PCCR1_UART5_MASK (1 << 27) +#define CCM_PCCR1_UART6_OFFSET 26 +#define CCM_PCCR1_UART6_MASK (1 << 26) +#define CCM_PCCR1_USBOTG_OFFSET 25 +#define CCM_PCCR1_USBOTG_MASK (1 << 25) +#define CCM_PCCR1_WDT_OFFSET 24 +#define CCM_PCCR1_WDT_MASK (1 << 24) +#define CCM_PCCR1_HCLK_ATA_OFFSET 23 +#define CCM_PCCR1_HCLK_ATA_MASK (1 << 23) +#define CCM_PCCR1_HCLK_BROM_OFFSET 22 +#define CCM_PCCR1_HCLK_BROM_MASK (1 << 22) +#define CCM_PCCR1_HCLK_CSI_OFFSET 21 +#define CCM_PCCR1_HCLK_CSI_MASK (1 << 21) +#define CCM_PCCR1_HCLK_DMA_OFFSET 20 +#define CCM_PCCR1_HCLK_DMA_MASK (1 << 20) +#define CCM_PCCR1_HCLK_EMI_OFFSET 19 +#define CCM_PCCR1_HCLK_EMI_MASK (1 << 19) +#define CCM_PCCR1_HCLK_EMMA_OFFSET 18 +#define CCM_PCCR1_HCLK_EMMA_MASK (1 << 18) +#define CCM_PCCR1_HCLK_FEC_OFFSET 17 +#define CCM_PCCR1_HCLK_FEC_MASK (1 << 17) +#define CCM_PCCR1_HCLK_VPU_OFFSET 16 +#define CCM_PCCR1_HCLK_VPU_MASK (1 << 16) +#define CCM_PCCR1_HCLK_LCDC_OFFSET 15 +#define CCM_PCCR1_HCLK_LCDC_MASK (1 << 15) +#define CCM_PCCR1_HCLK_RTIC_OFFSET 14 +#define CCM_PCCR1_HCLK_RTIC_MASK (1 << 14) +#define CCM_PCCR1_HCLK_SAHARA_OFFSET 13 +#define CCM_PCCR1_HCLK_SAHARA_MASK (1 << 13) +#define CCM_PCCR1_HCLK_SLCDC_OFFSET 12 +#define CCM_PCCR1_HCLK_SLCDC_MASK (1 << 12) +#define CCM_PCCR1_HCLK_USBOTG_OFFSET 11 +#define CCM_PCCR1_HCLK_USBOTG_MASK (1 << 11) +#define CCM_PCCR1_PERCLK1_OFFSET 10 +#define CCM_PCCR1_PERCLK1_MASK (1 << 10) +#define CCM_PCCR1_PERCLK2_OFFSET 9 +#define CCM_PCCR1_PERCLK2_MASK (1 << 9) +#define CCM_PCCR1_PERCLK3_OFFSET 8 +#define CCM_PCCR1_PERCLK3_MASK (1 << 8) +#define CCM_PCCR1_PERCLK4_OFFSET 7 +#define CCM_PCCR1_PERCLK4_MASK (1 << 7) +#define CCM_PCCR1_VPU_BAUD_OFFSET 6 +#define CCM_PCCR1_VPU_BAUD_MASK (1 << 6) +#define CCM_PCCR1_SSI1_BAUD_OFFSET 5 +#define CCM_PCCR1_SSI1_BAUD_MASK (1 << 5) +#define CCM_PCCR1_SSI2_BAUD_OFFSET 4 +#define CCM_PCCR1_SSI2_BAUD_MASK (1 << 4) +#define CCM_PCCR1_NFC_BAUD_OFFSET 3 +#define CCM_PCCR1_NFC_BAUD_MASK (1 << 3) +#define CCM_PCCR1_MSHC_BAUD_OFFSET 2 +#define CCM_PCCR1_MSHC_BAUD_MASK (1 << 2) + +#define CCM_CCSR_32KSR (1 << 15) +#define CCM_CCSR_CLKMODE1 (1 << 9) +#define CCM_CCSR_CLKMODE0 (1 << 8) +#define CCM_CCSR_CLKOSEL_OFFSET 0 +#define CCM_CCSR_CLKOSEL_MASK 0x1f + +#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */ +#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */ + +#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */ diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h index 4ed2d8072d03..f841127ef755 100644 --- a/include/asm-arm/arch-mxc/hardware.h +++ b/include/asm-arm/arch-mxc/hardware.h @@ -26,6 +26,9 @@ # include #endif +#ifdef CONFIG_ARCH_MX2 +#endif + #include #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/include/asm-arm/arch-mxc/iim.h b/include/asm-arm/arch-mxc/iim.h new file mode 100644 index 000000000000..315bffadafda --- /dev/null +++ b/include/asm-arm/arch-mxc/iim.h @@ -0,0 +1,77 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_IIM_H__ +#define __ASM_ARCH_MXC_IIM_H__ + +/* Register offsets */ +#define MXC_IIMSTAT 0x0000 +#define MXC_IIMSTATM 0x0004 +#define MXC_IIMERR 0x0008 +#define MXC_IIMEMASK 0x000C +#define MXC_IIMFCTL 0x0010 +#define MXC_IIMUA 0x0014 +#define MXC_IIMLA 0x0018 +#define MXC_IIMSDAT 0x001C +#define MXC_IIMPREV 0x0020 +#define MXC_IIMSREV 0x0024 +#define MXC_IIMPRG_P 0x0028 +#define MXC_IIMSCS0 0x002C +#define MXC_IIMSCS1 0x0030 +#define MXC_IIMSCS2 0x0034 +#define MXC_IIMSCS3 0x0038 +#define MXC_IIMFBAC0 0x0800 +#define MXC_IIMJAC 0x0804 +#define MXC_IIMHWV1 0x0808 +#define MXC_IIMHWV2 0x080C +#define MXC_IIMHAB0 0x0810 +#define MXC_IIMHAB1 0x0814 +/* Definitions for i.MX27 TO2 */ +#define MXC_IIMMAC 0x0814 +#define MXC_IIMPREV_FUSE 0x0818 +#define MXC_IIMSREV_FUSE 0x081C +#define MXC_IIMSJC_CHALL_0 0x0820 +#define MXC_IIMSJC_CHALL_7 0x083C +#define MXC_IIMFB0UC17 0x0840 +#define MXC_IIMFB0UC255 0x0BFC +#define MXC_IIMFBAC1 0x0C00 +/* Definitions for i.MX27 TO2 */ +#define MXC_IIMSUID 0x0C04 +#define MXC_IIMKEY0 0x0C04 +#define MXC_IIMKEY20 0x0C54 +#define MXC_IIMSJC_RESP_0 0x0C58 +#define MXC_IIMSJC_RESP_7 0x0C74 +#define MXC_IIMFB1UC30 0x0C78 +#define MXC_IIMFB1UC255 0x0FFC + +/* Bit definitions */ + +#define MXC_IIMHWV1_WLOCK (0x1 << 7) +#define MXC_IIMHWV1_MCU_ENDIAN (0x1 << 6) +#define MXC_IIMHWV1_DSP_ENDIAN (0x1 << 5) +#define MXC_IIMHWV1_BOOT_INT (0x1 << 4) +#define MXC_IIMHWV1_SCC_DISABLE (0x1 << 3) +#define MXC_IIMHWV1_HANTRO_DISABLE (0x1 << 2) +#define MXC_IIMHWV1_MEMSTICK_DIS (0x1 << 1) + +#define MXC_IIMHWV2_WLOCK (0x1 << 7) +#define MXC_IIMHWV2_BP_SDMA (0x1 << 6) +#define MXC_IIMHWV2_SCM_DCM (0x1 << 5) + +#endif /* __ASM_ARCH_MXC_IIM_H__ */ -- cgit v1.2.3 From fc80a5e3d0480d416e4f53b0680aaf525b5076d8 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:57 +0200 Subject: i.MX2 family: Add basic device support This patch adds a few on-chip devices for i.MX21/i.MX27 procesors. Signed-off-by: Juergen Beisert --- arch/arm/mach-mx2/Makefile | 2 +- arch/arm/mach-mx2/devices.c | 231 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 232 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-mx2/devices.c diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 937192dc57a7..db4d9c6f2738 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -4,4 +4,4 @@ # Object file lists. -obj-y := system.o generic.o +obj-y := system.o generic.o devices.o diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c new file mode 100644 index 000000000000..a1f44c3c5315 --- /dev/null +++ b/arch/arm/mach-mx2/devices.c @@ -0,0 +1,231 @@ +/* + * Author: MontaVista Software, Inc. + * + * + * Based on the OMAP devices.c + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ +#include +#include +#include +#include +#include + +#include + +/* + * Resource definition for the MXC IrDA + */ +static struct resource mxc_irda_resources[] = { + [0] = { + .start = UART3_BASE_ADDR, + .end = UART3_BASE_ADDR + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MXC_INT_UART3, + .end = MXC_INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; + +/* Platform Data for MXC IrDA */ +struct platform_device mxc_irda_device = { + .name = "mxc_irda", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_irda_resources), + .resource = mxc_irda_resources, +}; + +/* + * General Purpose Timer + * - i.MX1: 2 timer (slighly different register handling) + * - i.MX21: 3 timer + * - i.MX27: 6 timer + */ + +/* We use gpt0 as system timer, so do not add a device for this one */ + +static struct resource timer1_resources[] = { + [0] = { + .start = GPT2_BASE_ADDR, + .end = GPT2_BASE_ADDR + 0x17, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXC_INT_GPT2, + .end = MXC_INT_GPT2, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_gpt1 = { + .name = "imx_gpt", + .id = 1, + .num_resources = ARRAY_SIZE(timer1_resources), + .resource = timer1_resources +}; + +static struct resource timer2_resources[] = { + [0] = { + .start = GPT3_BASE_ADDR, + .end = GPT3_BASE_ADDR + 0x17, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXC_INT_GPT3, + .end = MXC_INT_GPT3, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_gpt2 = { + .name = "imx_gpt", + .id = 2, + .num_resources = ARRAY_SIZE(timer2_resources), + .resource = timer2_resources +}; + +#ifdef CONFIG_MACH_MX27 +static struct resource timer3_resources[] = { + [0] = { + .start = GPT4_BASE_ADDR, + .end = GPT4_BASE_ADDR + 0x17, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXC_INT_GPT4, + .end = MXC_INT_GPT4, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_gpt3 = { + .name = "imx_gpt", + .id = 3, + .num_resources = ARRAY_SIZE(timer3_resources), + .resource = timer3_resources +}; + +static struct resource timer4_resources[] = { + [0] = { + .start = GPT5_BASE_ADDR, + .end = GPT5_BASE_ADDR + 0x17, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXC_INT_GPT5, + .end = MXC_INT_GPT5, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_gpt4 = { + .name = "imx_gpt", + .id = 4, + .num_resources = ARRAY_SIZE(timer4_resources), + .resource = timer4_resources +}; + +static struct resource timer5_resources[] = { + [0] = { + .start = GPT6_BASE_ADDR, + .end = GPT6_BASE_ADDR + 0x17, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = MXC_INT_GPT6, + .end = MXC_INT_GPT6, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device mxc_gpt5 = { + .name = "imx_gpt", + .id = 5, + .num_resources = ARRAY_SIZE(timer5_resources), + .resource = timer5_resources +}; +#endif + +/* + * Watchdog: + * - i.MX1 + * - i.MX21 + * - i.MX27 + */ +static struct resource mxc_wdt_resources[] = { + { + .start = WDOG_BASE_ADDR, + .end = WDOG_BASE_ADDR + 0x30, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device mxc_wdt = { + .name = "mxc_wdt", + .id = 0, + .num_resources = ARRAY_SIZE(mxc_wdt_resources), + .resource = mxc_wdt_resources, +}; + +/* GPIO port description */ +static struct mxc_gpio_port imx_gpio_ports[] = { + [0] = { + .chip.label = "gpio-0", + .irq = MXC_INT_GPIO, + .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 0), + .virtual_irq_start = MXC_MAX_INT_LINES, + }, + [1] = { + .chip.label = "gpio-1", + .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 1), + .virtual_irq_start = MXC_MAX_INT_LINES + 32, + }, + [2] = { + .chip.label = "gpio-2", + .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 2), + .virtual_irq_start = MXC_MAX_INT_LINES + 64, + }, + [3] = { + .chip.label = "gpio-3", + .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 3), + .virtual_irq_start = MXC_MAX_INT_LINES + 96, + }, + [4] = { + .chip.label = "gpio-4", + .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 4), + .virtual_irq_start = MXC_MAX_INT_LINES + 128, + }, + [5] = { + .chip.label = "gpio-5", + .base = (void*)(AIPI_BASE_ADDR_VIRT + 0x15000 + 0x100 * 5), + .virtual_irq_start = MXC_MAX_INT_LINES + 160, + } +}; + +int __init mxc_register_gpios(void) +{ + return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); +} -- cgit v1.2.3 From 604cbadce2292d979749e2f5c6c3f75ee10f4c9e Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Sat, 5 Jul 2008 10:02:58 +0200 Subject: MX2 add support for mx2 in i.MX serial driver add support for mx2 in i.MX serial driver Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/Makefile | 2 +- arch/arm/mach-mx2/serial.c | 177 +++++++++++++++++++++++++++++++++++++++++++++ drivers/serial/imx.c | 6 +- 3 files changed, 181 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-mx2/serial.c diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index db4d9c6f2738..f8f8ecb01c97 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -4,4 +4,4 @@ # Object file lists. -obj-y := system.o generic.o devices.o +obj-y := system.o generic.o devices.o serial.o diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c new file mode 100644 index 000000000000..570c02b8e5df --- /dev/null +++ b/arch/arm/mach-mx2/serial.c @@ -0,0 +1,177 @@ +/* + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +static struct resource uart0[] = { + { + .start = UART1_BASE_ADDR, + .end = UART1_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART1, + .end = MXC_INT_UART1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device0 = { + .name = "imx-uart", + .id = 0, + .resource = uart0, + .num_resources = ARRAY_SIZE(uart0), +}; + +static struct resource uart1[] = { + { + .start = UART2_BASE_ADDR, + .end = UART2_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART2, + .end = MXC_INT_UART2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device1 = { + .name = "imx-uart", + .id = 1, + .resource = uart1, + .num_resources = ARRAY_SIZE(uart1), +}; + +static struct resource uart2[] = { + { + .start = UART3_BASE_ADDR, + .end = UART3_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART3, + .end = MXC_INT_UART3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device2 = { + .name = "imx-uart", + .id = 2, + .resource = uart2, + .num_resources = ARRAY_SIZE(uart2), +}; + +static struct resource uart3[] = { + { + .start = UART4_BASE_ADDR, + .end = UART4_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART4, + .end = MXC_INT_UART4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device3 = { + .name = "imx-uart", + .id = 3, + .resource = uart3, + .num_resources = ARRAY_SIZE(uart3), +}; + +static struct resource uart4[] = { + { + .start = UART5_BASE_ADDR, + .end = UART5_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART5, + .end = MXC_INT_UART5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device4 = { + .name = "imx-uart", + .id = 4, + .resource = uart4, + .num_resources = ARRAY_SIZE(uart4), +}; + +static struct resource uart5[] = { + { + .start = UART6_BASE_ADDR, + .end = UART6_BASE_ADDR + 0x0B5, + .flags = IORESOURCE_MEM, + }, { + .start = MXC_INT_UART6, + .end = MXC_INT_UART6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device mxc_uart_device5 = { + .name = "imx-uart", + .id = 5, + .resource = uart5, + .num_resources = ARRAY_SIZE(uart5), +}; + +/* + * Register only those UARTs that physically exists + */ +int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata) +{ + switch (uart_no) { + case 0: + mxc_uart_device0.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device0); + break; + case 1: + mxc_uart_device1.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device1); + break; +#ifndef CONFIG_MXC_IRDA + case 2: + mxc_uart_device2.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device2); + break; +#endif + case 3: + mxc_uart_device3.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device3); + break; + case 4: + mxc_uart_device4.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device4); + break; + case 5: + mxc_uart_device5.dev.platform_data = pdata; + platform_device_register(&mxc_uart_device5); + break; + default: + return -ENODEV; + } + + return 0; +} diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 549440b098b2..64acb39a51ba 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -62,7 +62,7 @@ #define UBIR 0xa4 /* BRM Incremental Register */ #define UBMR 0xa8 /* BRM Modulator Register */ #define UBRC 0xac /* Baud Rate Count Register */ -#ifdef CONFIG_ARCH_MX3 +#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2 #define ONEMS 0xb0 /* One Millisecond register */ #define UTS 0xb4 /* UART Test Register */ #endif @@ -99,7 +99,7 @@ #ifdef CONFIG_ARCH_IMX #define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ #endif -#ifdef CONFIG_ARCH_MX3 +#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2 #define UCR1_UARTCLKEN (0) /* not present on mx2/mx3 */ #endif #define UCR1_DOZE (1<<1) /* Doze */ @@ -182,7 +182,7 @@ #define MAX_INTERNAL_IRQ IMX_IRQS #endif -#ifdef CONFIG_ARCH_MX3 +#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2 #define SERIAL_IMX_MAJOR 207 #define MINOR_START 16 #define DEV_NAME "ttymxc" -- cgit v1.2.3 From f31405cc4cc568baad28273c7f45b0563b57a17d Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:59 +0200 Subject: i.MX27 CPU: Add basic i.MX27 CPU support Add basic i.MX27 CPU support Signed-off-by: Juergen Beisert --- arch/arm/mach-mx2/Kconfig | 6 + arch/arm/mach-mx2/Makefile | 2 + arch/arm/mach-mx2/cpu_imx27.c | 63 ++++++++ include/asm-arm/arch-mxc/hardware.h | 3 + include/asm-arm/arch-mxc/mx27.h | 302 ++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-mxc/mxc.h | 4 + 6 files changed, 380 insertions(+) create mode 100644 arch/arm/mach-mx2/cpu_imx27.c create mode 100644 include/asm-arm/arch-mxc/mx27.h diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 23def05fea0e..6e7d724e323e 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -1,5 +1,11 @@ comment "MX2 family CPU support" depends on ARCH_MX2 +config MACH_MX27 + bool "i.MX27 support" + depends on ARCH_MX2 + help + This enables support for Freescale's MX2 based i.MX27 processor. + comment "MX2 Platforms" depends on ARCH_MX2 diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index f8f8ecb01c97..c9eac3b1e139 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -5,3 +5,5 @@ # Object file lists. obj-y := system.o generic.o devices.o serial.o + +obj-$(CONFIG_MACH_MX27) += cpu_imx27.o diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c new file mode 100644 index 000000000000..d6b5c2e3377f --- /dev/null +++ b/arch/arm/mach-mx2/cpu_imx27.c @@ -0,0 +1,63 @@ +/* + * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +/* + * i.MX27 specific CPU detection code + */ + +#include +#include + +#include + +#include "crm_regs.h" + +static int cpu_silicon_rev = -1; +static int cpu_partnumber; + +static void query_silicon_parameter(void) +{ + u32 val; + /* + * now we have access to the IO registers. As we need + * the silicon revision very early we read it here to + * avoid any further hooks + */ + val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID); + + cpu_silicon_rev = (int)(val >> 28); + cpu_partnumber = (int)((val >> 12) & 0xFFFF); +} + +/* + * Returns: + * the silicon revision of the cpu + * -EINVAL - not a mx27 + */ +int mx27_revision(void) +{ + if (cpu_silicon_rev == -1) + query_silicon_parameter(); + + if (cpu_partnumber != 0x8821) + return -EINVAL; + + return cpu_silicon_rev; +} +EXPORT_SYMBOL(mx27_revision); diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h index f841127ef755..37cddbaaade7 100644 --- a/include/asm-arm/arch-mxc/hardware.h +++ b/include/asm-arm/arch-mxc/hardware.h @@ -27,6 +27,9 @@ #endif #ifdef CONFIG_ARCH_MX2 +# ifdef CONFIG_MACH_MX27 +# include +# endif #endif #include diff --git a/include/asm-arm/arch-mxc/mx27.h b/include/asm-arm/arch-mxc/mx27.h new file mode 100644 index 000000000000..212ecc246626 --- /dev/null +++ b/include/asm-arm/arch-mxc/mx27.h @@ -0,0 +1,302 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_MX27_H__ +#define __ASM_ARCH_MXC_MX27_H__ + +#ifndef __ASM_ARCH_MXC_HARDWARE_H__ +#error "Do not include directly." +#endif + +/* IRAM */ +#define IRAM_BASE_ADDR 0xFFFF4C00 /* internal ram */ + +/* Register offests */ +#define AIPI_BASE_ADDR 0x10000000 +#define AIPI_BASE_ADDR_VIRT 0xF4000000 +#define AIPI_SIZE SZ_1M + +#define DMA_BASE_ADDR (AIPI_BASE_ADDR + 0x01000) +#define WDOG_BASE_ADDR (AIPI_BASE_ADDR + 0x02000) +#define GPT1_BASE_ADDR (AIPI_BASE_ADDR + 0x03000) +#define GPT2_BASE_ADDR (AIPI_BASE_ADDR + 0x04000) +#define GPT3_BASE_ADDR (AIPI_BASE_ADDR + 0x05000) +#define PWM_BASE_ADDR (AIPI_BASE_ADDR + 0x06000) +#define RTC_BASE_ADDR (AIPI_BASE_ADDR + 0x07000) +#define KPP_BASE_ADDR (AIPI_BASE_ADDR + 0x08000) +#define OWIRE_BASE_ADDR (AIPI_BASE_ADDR + 0x09000) +#define UART1_BASE_ADDR (AIPI_BASE_ADDR + 0x0A000) +#define UART2_BASE_ADDR (AIPI_BASE_ADDR + 0x0B000) +#define UART3_BASE_ADDR (AIPI_BASE_ADDR + 0x0C000) +#define UART4_BASE_ADDR (AIPI_BASE_ADDR + 0x0D000) +#define CSPI1_BASE_ADDR (AIPI_BASE_ADDR + 0x0E000) +#define CSPI2_BASE_ADDR (AIPI_BASE_ADDR + 0x0F000) +#define SSI1_BASE_ADDR (AIPI_BASE_ADDR + 0x10000) +#define SSI2_BASE_ADDR (AIPI_BASE_ADDR + 0x11000) +#define I2C_BASE_ADDR (AIPI_BASE_ADDR + 0x12000) +#define SDHC1_BASE_ADDR (AIPI_BASE_ADDR + 0x13000) +#define SDHC2_BASE_ADDR (AIPI_BASE_ADDR + 0x14000) +#define GPIO_BASE_ADDR (AIPI_BASE_ADDR + 0x15000) +#define AUDMUX_BASE_ADDR (AIPI_BASE_ADDR + 0x16000) + +#define CSPI3_BASE_ADDR (AIPI_BASE_ADDR + 0x17000) +#define MSHC_BASE_ADDR (AIPI_BASE_ADDR + 0x18000) +#define GPT5_BASE_ADDR (AIPI_BASE_ADDR + 0x19000) +#define GPT4_BASE_ADDR (AIPI_BASE_ADDR + 0x1A000) +#define UART5_BASE_ADDR (AIPI_BASE_ADDR + 0x1B000) +#define UART6_BASE_ADDR (AIPI_BASE_ADDR + 0x1C000) +#define I2C2_BASE_ADDR (AIPI_BASE_ADDR + 0x1D000) +#define SDHC3_BASE_ADDR (AIPI_BASE_ADDR + 0x1E000) +#define GPT6_BASE_ADDR (AIPI_BASE_ADDR + 0x1F000) + +#define LCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x21000) +#define SLCDC_BASE_ADDR (AIPI_BASE_ADDR + 0x22000) +#define VPU_BASE_ADDR (AIPI_BASE_ADDR + 0x23000) +#define USBOTG_BASE_ADDR (AIPI_BASE_ADDR + 0x24000) +/* for mx27*/ +#define OTG_BASE_ADDR USBOTG_BASE_ADDR +#define SAHARA_BASE_ADDR (AIPI_BASE_ADDR + 0x25000) +#define EMMA_BASE_ADDR (AIPI_BASE_ADDR + 0x26400) +#define CCM_BASE_ADDR (AIPI_BASE_ADDR + 0x27000) +#define SYSCTRL_BASE_ADDR (AIPI_BASE_ADDR + 0x27800) +#define IIM_BASE_ADDR (AIPI_BASE_ADDR + 0x28000) + +#define RTIC_BASE_ADDR (AIPI_BASE_ADDR + 0x2A000) +#define FEC_BASE_ADDR (AIPI_BASE_ADDR + 0x2B000) +#define SCC_BASE_ADDR (AIPI_BASE_ADDR + 0x2C000) +#define ETB_BASE_ADDR (AIPI_BASE_ADDR + 0x3B000) +#define ETB_RAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3C000) + +#define JAM_BASE_ADDR (AIPI_BASE_ADDR + 0x3E000) +#define MAX_BASE_ADDR (AIPI_BASE_ADDR + 0x3F000) + +/* ROMP and AVIC */ +#define ROMP_BASE_ADDR 0x10041000 + +#define AVIC_BASE_ADDR 0x10040000 + +#define SAHB1_BASE_ADDR 0x80000000 +#define SAHB1_BASE_ADDR_VIRT 0xF4100000 +#define SAHB1_SIZE SZ_1M + +#define CSI_BASE_ADDR (SAHB1_BASE_ADDR + 0x0000) +#define ATA_BASE_ADDR (SAHB1_BASE_ADDR + 0x1000) + +/* NAND, SDRAM, WEIM, M3IF, EMI controllers */ +#define X_MEMC_BASE_ADDR 0xD8000000 +#define X_MEMC_BASE_ADDR_VIRT 0xF4200000 +#define X_MEMC_SIZE SZ_1M + +#define NFC_BASE_ADDR (X_MEMC_BASE_ADDR) +#define SDRAMC_BASE_ADDR (X_MEMC_BASE_ADDR + 0x1000) +#define WEIM_BASE_ADDR (X_MEMC_BASE_ADDR + 0x2000) +#define M3IF_BASE_ADDR (X_MEMC_BASE_ADDR + 0x3000) +#define PCMCIA_CTL_BASE_ADDR (X_MEMC_BASE_ADDR + 0x4000) + +/* Memory regions and CS */ +#define SDRAM_BASE_ADDR 0xA0000000 +#define CSD1_BASE_ADDR 0xB0000000 + +#define CS0_BASE_ADDR 0xC0000000 +#define CS1_BASE_ADDR 0xC8000000 +#define CS2_BASE_ADDR 0xD0000000 +#define CS3_BASE_ADDR 0xD2000000 +#define CS4_BASE_ADDR 0xD4000000 +#define CS5_BASE_ADDR 0xD6000000 +#define PCMCIA_MEM_BASE_ADDR 0xDC000000 + +/* + * This macro defines the physical to virtual address mapping for all the + * peripheral modules. It is used by passing in the physical address as x + * and returning the virtual address. If the physical address is not mapped, + * it returns 0xDEADBEEF + */ +#define IO_ADDRESS(x) \ + (((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \ + AIPI_IO_ADDRESS(x) : \ + ((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \ + SAHB1_IO_ADDRESS(x) : \ + ((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \ + X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF) + +/* define the address mapping macros: in physical address order */ +#define AIPI_IO_ADDRESS(x) \ + (((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT) + +#define AVIC_IO_ADDRESS(x) AIPI_IO_ADDRESS(x) + +#define SAHB1_IO_ADDRESS(x) \ + (((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT) + +#define CS4_IO_ADDRESS(x) \ + (((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT) + +#define X_MEMC_IO_ADDRESS(x) \ + (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) + +#define PCMCIA_IO_ADDRESS(x) \ + (((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT) + +/* fixed interrput numbers */ +#define MXC_INT_CCM 63 +#define MXC_INT_IIM 62 +#define MXC_INT_LCDC 61 +#define MXC_INT_SLCDC 60 +#define MXC_INT_SAHARA 59 +#define MXC_INT_SCC_SCM 58 +#define MXC_INT_SCC_SMN 57 +#define MXC_INT_USB3 56 +#define MXC_INT_USB2 55 +#define MXC_INT_USB1 54 +#define MXC_INT_VPU 53 +#define MXC_INT_EMMAPP 52 +#define MXC_INT_EMMAPRP 51 +#define MXC_INT_FEC 50 +#define MXC_INT_UART5 49 +#define MXC_INT_UART6 48 +#define MXC_INT_DMACH15 47 +#define MXC_INT_DMACH14 46 +#define MXC_INT_DMACH13 45 +#define MXC_INT_DMACH12 44 +#define MXC_INT_DMACH11 43 +#define MXC_INT_DMACH10 42 +#define MXC_INT_DMACH9 41 +#define MXC_INT_DMACH8 40 +#define MXC_INT_DMACH7 39 +#define MXC_INT_DMACH6 38 +#define MXC_INT_DMACH5 37 +#define MXC_INT_DMACH4 36 +#define MXC_INT_DMACH3 35 +#define MXC_INT_DMACH2 34 +#define MXC_INT_DMACH1 33 +#define MXC_INT_DMACH0 32 +#define MXC_INT_CSI 31 +#define MXC_INT_ATA 30 +#define MXC_INT_NANDFC 29 +#define MXC_INT_PCMCIA 28 +#define MXC_INT_WDOG 27 +#define MXC_INT_GPT1 26 +#define MXC_INT_GPT2 25 +#define MXC_INT_GPT3 24 +#define MXC_INT_GPT INT_GPT1 +#define MXC_INT_PWM 23 +#define MXC_INT_RTC 22 +#define MXC_INT_KPP 21 +#define MXC_INT_UART1 20 +#define MXC_INT_UART2 19 +#define MXC_INT_UART3 18 +#define MXC_INT_UART4 17 +#define MXC_INT_CSPI1 16 +#define MXC_INT_CSPI2 15 +#define MXC_INT_SSI1 14 +#define MXC_INT_SSI2 13 +#define MXC_INT_I2C 12 +#define MXC_INT_SDHC1 11 +#define MXC_INT_SDHC2 10 +#define MXC_INT_SDHC3 9 +#define MXC_INT_GPIO 8 +#define MXC_INT_SDHC 7 +#define MXC_INT_CSPI3 6 +#define MXC_INT_RTIC 5 +#define MXC_INT_GPT4 4 +#define MXC_INT_GPT5 3 +#define MXC_INT_GPT6 2 +#define MXC_INT_I2C2 1 + +/* fixed DMA request numbers */ +#define DMA_REQ_NFC 37 +#define DMA_REQ_SDHC3 36 +#define DMA_REQ_UART6_RX 35 +#define DMA_REQ_UART6_TX 34 +#define DMA_REQ_UART5_RX 33 +#define DMA_REQ_UART5_TX 32 +#define DMA_REQ_CSI_RX 31 +#define DMA_REQ_CSI_STAT 30 +#define DMA_REQ_ATA_RCV 29 +#define DMA_REQ_ATA_TX 28 +#define DMA_REQ_UART1_TX 27 +#define DMA_REQ_UART1_RX 26 +#define DMA_REQ_UART2_TX 25 +#define DMA_REQ_UART2_RX 24 +#define DMA_REQ_UART3_TX 23 +#define DMA_REQ_UART3_RX 22 +#define DMA_REQ_UART4_TX 21 +#define DMA_REQ_UART4_RX 20 +#define DMA_REQ_CSPI1_TX 19 +#define DMA_REQ_CSPI1_RX 18 +#define DMA_REQ_CSPI2_TX 17 +#define DMA_REQ_CSPI2_RX 16 +#define DMA_REQ_SSI1_TX1 15 +#define DMA_REQ_SSI1_RX1 14 +#define DMA_REQ_SSI1_TX0 13 +#define DMA_REQ_SSI1_RX0 12 +#define DMA_REQ_SSI2_TX1 11 +#define DMA_REQ_SSI2_RX1 10 +#define DMA_REQ_SSI2_TX0 9 +#define DMA_REQ_SSI2_RX0 8 +#define DMA_REQ_SDHC1 7 +#define DMA_REQ_SDHC2 6 +#define DMA_REQ_MSHC 4 +#define DMA_REQ_EXT 3 +#define DMA_REQ_CSPI3_TX 2 +#define DMA_REQ_CSPI3_RX 1 + +/* silicon revisions specific to i.MX27 */ +#define CHIP_REV_1_0 0x00 +#define CHIP_REV_2_0 0x01 + +#ifndef __ASSEMBLY__ +extern int mx27_revision(void); +#endif + +/* gpio and gpio based interrupt handling */ +#define GPIO_DR 0x1C +#define GPIO_GDIR 0x00 +#define GPIO_PSR 0x24 +#define GPIO_ICR1 0x28 +#define GPIO_ICR2 0x2C +#define GPIO_IMR 0x30 +#define GPIO_ISR 0x34 +#define GPIO_INT_LOW_LEV 0x3 +#define GPIO_INT_HIGH_LEV 0x2 +#define GPIO_INT_RISE_EDGE 0x0 +#define GPIO_INT_FALL_EDGE 0x1 +#define GPIO_INT_NONE 0x4 + +/* Mandatory defines used globally */ + +/* this is an i.MX27 CPU */ +#define cpu_is_mx27() (1) + +/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */ +#define ARCH_NR_GPIOS (192 + 16) + +/* OS clock tick rate */ +#define CLOCK_TICK_RATE 13300000 + +/* Start of RAM */ +#define PHYS_OFFSET SDRAM_BASE_ADDR + +/* max interrupt lines count */ +#define NR_IRQS 256 + +/* count of internal interrupt sources */ +#define MXC_MAX_INT_LINES 64 + +#endif /* __ASM_ARCH_MXC_MX27_H__ */ diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h index 3e1c4ded18e2..332eda4dbd3b 100644 --- a/include/asm-arm/arch-mxc/mxc.h +++ b/include/asm-arm/arch-mxc/mxc.h @@ -29,4 +29,8 @@ # define cpu_is_mx31() (0) #endif +#ifndef CONFIG_MACH_MX27 +# define cpu_is_mx27() (0) +#endif + #endif /* __ASM_ARCH_MXC_H__ */ -- cgit v1.2.3 From c46f5856517c2d4f438df87dac81f2295931ee93 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:02:59 +0200 Subject: i.MX2 family: Add clock handling for i.MX27 CPU Internal clock path handling for the i.MX27 CPU. Changed against the original Freescale code (and against clocklib for example): - clock rate is always calculated whenever one ask for the current rate. (means no "rate" member in the clock structure). So switching the PLL base frequency will propagate immediately to all other clocks that are depending on this frequency. TODO: - Check if the i.MX21 CPU can share the same code. Signed-off-by: Juergen Beisert --- arch/arm/mach-mx2/Makefile | 1 + arch/arm/mach-mx2/clock_imx27.c | 1626 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 1627 insertions(+) create mode 100644 arch/arm/mach-mx2/clock_imx27.c diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index c9eac3b1e139..74fb9b3eb066 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -7,3 +7,4 @@ obj-y := system.o generic.o devices.o serial.o obj-$(CONFIG_MACH_MX27) += cpu_imx27.o +obj-$(CONFIG_MACH_MX27) += clock_imx27.o diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c new file mode 100644 index 000000000000..0a29ef29c73a --- /dev/null +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -0,0 +1,1626 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Juergen Beisert, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "crm_regs.h" + +static struct clk ckil_clk; +static struct clk mpll_clk; +static struct clk mpll_main_clk[]; +static struct clk spll_clk; + +static int _clk_enable(struct clk *clk) +{ + unsigned long reg; + + reg = __raw_readl(clk->enable_reg); + reg |= 1 << clk->enable_shift; + __raw_writel(reg, clk->enable_reg); + + return 0; +} + +static void _clk_disable(struct clk *clk) +{ + unsigned long reg; + + reg = __raw_readl(clk->enable_reg); + reg &= ~(1 << clk->enable_shift); + __raw_writel(reg, clk->enable_reg); +} + +static int _clk_spll_enable(struct clk *clk) +{ + unsigned long reg; + + reg = __raw_readl(CCM_CSCR); + reg |= CCM_CSCR_SPEN; + __raw_writel(reg, CCM_CSCR); + + while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0) + ; + + return 0; +} + +static void _clk_spll_disable(struct clk *clk) +{ + unsigned long reg; + + reg = __raw_readl(CCM_CSCR); + reg &= ~CCM_CSCR_SPEN; + __raw_writel(reg, CCM_CSCR); +} + +static void _clk_pccr01_enable(unsigned long mask0, unsigned long mask1) +{ + unsigned long reg; + + reg = __raw_readl(CCM_PCCR0); + reg |= mask0; + __raw_writel(reg, CCM_PCCR0); + + reg = __raw_readl(CCM_PCCR1); + reg |= mask1; + __raw_writel(reg, CCM_PCCR1); + +} + +static void _clk_pccr01_disable(unsigned long mask0, unsigned long mask1) +{ + unsigned long reg; + + reg = __raw_readl(CCM_PCCR0); + reg &= ~mask0; + __raw_writel(reg, CCM_PCCR0); + + reg = __raw_readl(CCM_PCCR1); + reg &= ~mask1; + __raw_writel(reg, CCM_PCCR1); +} + +static void _clk_pccr10_enable(unsigned long mask1, unsigned long mask0) +{ + unsigned long reg; + + reg = __raw_readl(CCM_PCCR1); + reg |= mask1; + __raw_writel(reg, CCM_PCCR1); + + reg = __raw_readl(CCM_PCCR0); + reg |= mask0; + __raw_writel(reg, CCM_PCCR0); +} + +static void _clk_pccr10_disable(unsigned long mask1, unsigned long mask0) +{ + unsigned long reg; + + reg = __raw_readl(CCM_PCCR1); + reg &= ~mask1; + __raw_writel(reg, CCM_PCCR1); + + reg = __raw_readl(CCM_PCCR0); + reg &= ~mask0; + __raw_writel(reg, CCM_PCCR0); +} + +static int _clk_dma_enable(struct clk *clk) +{ + _clk_pccr01_enable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK); + + return 0; +} + +static void _clk_dma_disable(struct clk *clk) +{ + _clk_pccr01_disable(CCM_PCCR0_DMA_MASK, CCM_PCCR1_HCLK_DMA_MASK); +} + +static int _clk_rtic_enable(struct clk *clk) +{ + _clk_pccr01_enable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK); + + return 0; +} + +static void _clk_rtic_disable(struct clk *clk) +{ + _clk_pccr01_disable(CCM_PCCR0_RTIC_MASK, CCM_PCCR1_HCLK_RTIC_MASK); +} + +static int _clk_emma_enable(struct clk *clk) +{ + _clk_pccr01_enable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK); + + return 0; +} + +static void _clk_emma_disable(struct clk *clk) +{ + _clk_pccr01_disable(CCM_PCCR0_EMMA_MASK, CCM_PCCR1_HCLK_EMMA_MASK); +} + +static int _clk_slcdc_enable(struct clk *clk) +{ + _clk_pccr01_enable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK); + + return 0; +} + +static void _clk_slcdc_disable(struct clk *clk) +{ + _clk_pccr01_disable(CCM_PCCR0_SLCDC_MASK, CCM_PCCR1_HCLK_SLCDC_MASK); +} + +static int _clk_fec_enable(struct clk *clk) +{ + _clk_pccr01_enable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK); + + return 0; +} + +static void _clk_fec_disable(struct clk *clk) +{ + _clk_pccr01_disable(CCM_PCCR0_FEC_MASK, CCM_PCCR1_HCLK_FEC_MASK); +} + +static int _clk_vpu_enable(struct clk *clk) +{ + unsigned long reg; + + reg = __raw_readl(CCM_PCCR1); + reg |= CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK; + __raw_writel(reg, CCM_PCCR1); + + return 0; +} + +static void _clk_vpu_disable(struct clk *clk) +{ + unsigned long reg; + + reg = __raw_readl(CCM_PCCR1); + reg &= ~(CCM_PCCR1_VPU_BAUD_MASK | CCM_PCCR1_HCLK_VPU_MASK); + __raw_writel(reg, CCM_PCCR1); +} + +static int _clk_sahara2_enable(struct clk *clk) +{ + _clk_pccr01_enable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK); + + return 0; +} + +static void _clk_sahara2_disable(struct clk *clk) +{ + _clk_pccr01_disable(CCM_PCCR0_SAHARA_MASK, CCM_PCCR1_HCLK_SAHARA_MASK); +} + +static int _clk_mstick1_enable(struct clk *clk) +{ + _clk_pccr10_enable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK); + + return 0; +} + +static void _clk_mstick1_disable(struct clk *clk) +{ + _clk_pccr10_disable(CCM_PCCR1_MSHC_BAUD_MASK, CCM_PCCR0_MSHC_MASK); +} + +#define CSCR() (__raw_readl(CCM_CSCR)) +#define PCDR0() (__raw_readl(CCM_PCDR0)) +#define PCDR1() (__raw_readl(CCM_PCDR1)) + +static int _clk_cpu_set_parent(struct clk *clk, struct clk *parent) +{ + int cscr = CSCR(); + + if (clk->parent == parent) + return 0; + + if (mx27_revision() >= CHIP_REV_2_0) { + if (parent == &mpll_main_clk[0]) { + cscr |= CCM_CSCR_ARM_SRC; + } else { + if (parent == &mpll_main_clk[1]) + cscr &= ~CCM_CSCR_ARM_SRC; + else + return -EINVAL; + } + __raw_writel(cscr, CCM_CSCR); + } else + return -ENODEV; + + clk->parent = parent; + return 0; +} + +static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate) +{ + int div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div > 4) + div = 4; + + return parent_rate / div; +} + +static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int div; + uint32_t reg; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + + if (div > 4 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + + div--; + + reg = __raw_readl(CCM_CSCR); + if (mx27_revision() >= CHIP_REV_2_0) { + reg &= ~CCM_CSCR_ARM_MASK; + reg |= div << CCM_CSCR_ARM_OFFSET; + reg &= ~0x06; + __raw_writel(reg | 0x80000000, CCM_CSCR); + } else { + printk(KERN_ERR "Cant set CPU frequency!\n"); + } + + return 0; +} + +static unsigned long _clk_perclkx_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div > 64) + div = 64; + + return parent_rate / div; +} + +static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + if (clk->id < 0 || clk->id > 3) + return -EINVAL; + + div = parent_rate / rate; + if (div > 64 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + div--; + + reg = + __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK << + (clk->id << 3)); + reg |= div << (clk->id << 3); + __raw_writel(reg, CCM_PCDR1); + + return 0; +} + +static unsigned long _clk_usb_recalc(struct clk *clk) +{ + unsigned long usb_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET; + + return parent_rate / (usb_pdf + 1U); +} + +static unsigned long _clk_ssi1_recalc(struct clk *clk) +{ + unsigned long ssi1_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + ssi1_pdf = (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK) >> + CCM_PCDR0_SSI1BAUDDIV_OFFSET; + + if (mx27_revision() >= CHIP_REV_2_0) + ssi1_pdf += 4; + else + ssi1_pdf = (ssi1_pdf < 2) ? 124UL : ssi1_pdf; + + return 2UL * parent_rate / ssi1_pdf; +} + +static unsigned long _clk_ssi2_recalc(struct clk *clk) +{ + unsigned long ssi2_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + ssi2_pdf = (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >> + CCM_PCDR0_SSI2BAUDDIV_OFFSET; + + if (mx27_revision() >= CHIP_REV_2_0) + ssi2_pdf += 4; + else + ssi2_pdf = (ssi2_pdf < 2) ? 124UL : ssi2_pdf; + + return 2UL * parent_rate / ssi2_pdf; +} + +static unsigned long _clk_nfc_recalc(struct clk *clk) +{ + unsigned long nfc_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + if (mx27_revision() >= CHIP_REV_2_0) { + nfc_pdf = + (PCDR0() & CCM_PCDR0_NFCDIV2_MASK) >> + CCM_PCDR0_NFCDIV2_OFFSET; + } else { + nfc_pdf = + (PCDR0() & CCM_PCDR0_NFCDIV_MASK) >> + CCM_PCDR0_NFCDIV_OFFSET; + } + + return parent_rate / (nfc_pdf + 1); +} + +static unsigned long _clk_vpu_recalc(struct clk *clk) +{ + unsigned long vpu_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + if (mx27_revision() >= CHIP_REV_2_0) { + vpu_pdf = + (PCDR0() & CCM_PCDR0_VPUDIV2_MASK) >> + CCM_PCDR0_VPUDIV2_OFFSET; + vpu_pdf += 4; + } else { + vpu_pdf = + (PCDR0() & CCM_PCDR0_VPUDIV_MASK) >> + CCM_PCDR0_VPUDIV_OFFSET; + vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf; + } + return 2UL * parent_rate / vpu_pdf; +} + +static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate) +{ + return clk->parent->round_rate(clk->parent, rate); +} + +static int _clk_parent_set_rate(struct clk *clk, unsigned long rate) +{ + return clk->parent->set_rate(clk->parent, rate); +} + +/* in Hz */ +static unsigned long external_high_reference = 26000000; + +static unsigned long get_high_reference_clock_rate(struct clk *clk) +{ + return external_high_reference; +} + +/* + * the high frequency external clock reference + * Default case is 26MHz. Could be changed at runtime + * with a call to change_external_high_reference() + */ +static struct clk ckih_clk = { + .name = "ckih", + .get_rate = get_high_reference_clock_rate, +}; + +/* in Hz */ +static unsigned long external_low_reference = 32768; + +static unsigned long get_low_reference_clock_rate(struct clk *clk) +{ + return external_low_reference; +} + +/* + * the low frequency external clock reference + * Default case is 32.768kHz Could be changed at runtime + * with a call to change_external_low_reference() + */ +static struct clk ckil_clk = { + .name = "ckil", + .get_rate = get_low_reference_clock_rate, +}; + +static unsigned long get_mpll_clk(struct clk *clk) +{ + uint32_t reg; + unsigned long ref_clk; + unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0; + unsigned long long temp; + + ref_clk = clk_get_rate(clk->parent); + + reg = __raw_readl(CCM_MPCTL0); + pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET; + mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET; + mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET; + mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET; + + mfi = (mfi <= 5) ? 5 : mfi; + temp = 2LL * ref_clk * mfn; + do_div(temp, mfd + 1); + temp = 2LL * ref_clk * mfi + temp; + do_div(temp, pdf + 1); + + return (unsigned long)temp; +} + +static struct clk mpll_clk = { + .name = "mpll", + .parent = &ckih_clk, + .get_rate = get_mpll_clk, +}; + +static unsigned long _clk_mpll_main_get_rate(struct clk *clk) +{ + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + /* i.MX27 TO2: + * clk->id == 0: arm clock source path 1 which is from 2*MPLL/DIV_2 + * clk->id == 1: arm clock source path 2 which is from 2*MPLL/DIV_3 + */ + + if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1) + return 2UL * parent_rate / 3UL; + + return parent_rate; +} + +static struct clk mpll_main_clk[] = { + { + /* For i.MX27 TO2, it is the MPLL path 1 of ARM core + * It provide the clock source whose rate is same as MPLL + */ + .name = "mpll_main", + .id = 0, + .parent = &mpll_clk, + .get_rate = _clk_mpll_main_get_rate + }, { + /* For i.MX27 TO2, it is the MPLL path 2 of ARM core + * It provide the clock source whose rate is same MPLL * 2/3 + */ + .name = "mpll_main", + .id = 1, + .parent = &mpll_clk, + .get_rate = _clk_mpll_main_get_rate + } +}; + +static unsigned long get_spll_clk(struct clk *clk) +{ + uint32_t reg; + unsigned long ref_clk; + unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0; + unsigned long long temp; + + ref_clk = clk_get_rate(clk->parent); + + reg = __raw_readl(CCM_SPCTL0); + /*TODO: This is TO2 Bug */ + if (mx27_revision() >= CHIP_REV_2_0) + __raw_writel(reg, CCM_SPCTL0); + + pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET; + mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET; + mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET; + mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET; + + mfi = (mfi <= 5) ? 5 : mfi; + temp = 2LL * ref_clk * mfn; + do_div(temp, mfd + 1); + temp = 2LL * ref_clk * mfi + temp; + do_div(temp, pdf + 1); + + return (unsigned long)temp; +} + +static struct clk spll_clk = { + .name = "spll", + .parent = &ckih_clk, + .get_rate = get_spll_clk, + .enable = _clk_spll_enable, + .disable = _clk_spll_disable, +}; + +static unsigned long get_cpu_clk(struct clk *clk) +{ + u32 div; + unsigned long rate; + + if (mx27_revision() >= CHIP_REV_2_0) + div = (CSCR() & CCM_CSCR_ARM_MASK) >> CCM_CSCR_ARM_OFFSET; + else + div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET; + + rate = clk_get_rate(clk->parent); + return rate / (div + 1); +} + +static struct clk cpu_clk = { + .name = "cpu_clk", + .parent = &mpll_main_clk[1], + .set_parent = _clk_cpu_set_parent, + .round_rate = _clk_cpu_round_rate, + .get_rate = get_cpu_clk, + .set_rate = _clk_cpu_set_rate, +}; + +static unsigned long get_ahb_clk(struct clk *clk) +{ + unsigned long rate; + unsigned long bclk_pdf; + + if (mx27_revision() >= CHIP_REV_2_0) + bclk_pdf = (CSCR() & CCM_CSCR_AHB_MASK) + >> CCM_CSCR_AHB_OFFSET; + else + bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK) + >> CCM_CSCR_BCLK_OFFSET; + + rate = clk_get_rate(clk->parent); + return rate / (bclk_pdf + 1); +} + +static struct clk ahb_clk = { + .name = "ahb_clk", + .parent = &mpll_main_clk[1], + .get_rate = get_ahb_clk, +}; + +static unsigned long get_ipg_clk(struct clk *clk) +{ + unsigned long rate; + unsigned long ipg_pdf; + + if (mx27_revision() >= CHIP_REV_2_0) + return clk_get_rate(clk->parent); + else + ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET; + + rate = clk_get_rate(clk->parent); + return rate / (ipg_pdf + 1); +} + +static struct clk ipg_clk = { + .name = "ipg_clk", + .parent = &ahb_clk, + .get_rate = get_ipg_clk, +}; + +static unsigned long _clk_perclkx_recalc(struct clk *clk) +{ + unsigned long perclk_pdf; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + if (clk->id < 0 || clk->id > 3) + return 0; + + perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK; + + return parent_rate / (perclk_pdf + 1); +} + +static struct clk per_clk[] = { + { + .name = "per_clk", + .id = 0, + .parent = &mpll_main_clk[1], + .get_rate = _clk_perclkx_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_PERCLK1_OFFSET, + .disable = _clk_disable, + }, { + .name = "per_clk", + .id = 1, + .parent = &mpll_main_clk[1], + .get_rate = _clk_perclkx_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_PERCLK2_OFFSET, + .disable = _clk_disable, + }, { + .name = "per_clk", + .id = 2, + .parent = &mpll_main_clk[1], + .round_rate = _clk_perclkx_round_rate, + .set_rate = _clk_perclkx_set_rate, + .get_rate = _clk_perclkx_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_PERCLK3_OFFSET, + .disable = _clk_disable, + }, { + .name = "per_clk", + .id = 3, + .parent = &mpll_main_clk[1], + .round_rate = _clk_perclkx_round_rate, + .set_rate = _clk_perclkx_set_rate, + .get_rate = _clk_perclkx_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_PERCLK4_OFFSET, + .disable = _clk_disable, + }, +}; + +struct clk uart1_clk[] = { + { + .name = "uart_clk", + .id = 0, + .parent = &per_clk[0], + .secondary = &uart1_clk[1], + }, { + .name = "uart_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_UART1_OFFSET, + .disable = _clk_disable, + }, +}; + +struct clk uart2_clk[] = { + { + .name = "uart_clk", + .id = 1, + .parent = &per_clk[0], + .secondary = &uart2_clk[1], + }, { + .name = "uart_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_UART2_OFFSET, + .disable = _clk_disable, + }, +}; + +struct clk uart3_clk[] = { + { + .name = "uart_clk", + .id = 2, + .parent = &per_clk[0], + .secondary = &uart3_clk[1], + }, { + .name = "uart_ipg_clk", + .id = 2, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_UART3_OFFSET, + .disable = _clk_disable, + }, +}; + +struct clk uart4_clk[] = { + { + .name = "uart_clk", + .id = 3, + .parent = &per_clk[0], + .secondary = &uart4_clk[1], + }, { + .name = "uart_ipg_clk", + .id = 3, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_UART4_OFFSET, + .disable = _clk_disable, + }, +}; + +struct clk uart5_clk[] = { + { + .name = "uart_clk", + .id = 4, + .parent = &per_clk[0], + .secondary = &uart5_clk[1], + }, { + .name = "uart_ipg_clk", + .id = 4, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_UART5_OFFSET, + .disable = _clk_disable, + }, +}; + +struct clk uart6_clk[] = { + { + .name = "uart_clk", + .id = 5, + .parent = &per_clk[0], + .secondary = &uart6_clk[1], + }, { + .name = "uart_ipg_clk", + .id = 5, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_UART6_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk gpt1_clk[] = { + { + .name = "gpt_clk", + .id = 0, + .parent = &per_clk[0], + .secondary = &gpt1_clk[1], + }, { + .name = "gpt_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_GPT1_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk gpt2_clk[] = { + { + .name = "gpt_clk", + .id = 1, + .parent = &per_clk[0], + .secondary = &gpt2_clk[1], + }, { + .name = "gpt_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_GPT2_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk gpt3_clk[] = { + { + .name = "gpt_clk", + .id = 2, + .parent = &per_clk[0], + .secondary = &gpt3_clk[1], + }, { + .name = "gpt_ipg_clk", + .id = 2, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_GPT3_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk gpt4_clk[] = { + { + .name = "gpt_clk", + .id = 3, + .parent = &per_clk[0], + .secondary = &gpt4_clk[1], + }, { + .name = "gpt_ipg_clk", + .id = 3, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_GPT4_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk gpt5_clk[] = { + { + .name = "gpt_clk", + .id = 4, + .parent = &per_clk[0], + .secondary = &gpt5_clk[1], + }, { + .name = "gpt_ipg_clk", + .id = 4, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_GPT5_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk gpt6_clk[] = { + { + .name = "gpt_clk", + .id = 5, + .parent = &per_clk[0], + .secondary = &gpt6_clk[1], + }, { + .name = "gpt_ipg_clk", + .id = 5, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_GPT6_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk pwm_clk[] = { + { + .name = "pwm_clk", + .parent = &per_clk[0], + .secondary = &pwm_clk[1], + }, { + .name = "pwm_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_PWM_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk sdhc1_clk[] = { + { + .name = "sdhc_clk", + .id = 0, + .parent = &per_clk[1], + .secondary = &sdhc1_clk[1], + }, { + .name = "sdhc_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_SDHC1_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk sdhc2_clk[] = { + { + .name = "sdhc_clk", + .id = 1, + .parent = &per_clk[1], + .secondary = &sdhc2_clk[1], + }, { + .name = "sdhc_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_SDHC2_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk sdhc3_clk[] = { + { + .name = "sdhc_clk", + .id = 2, + .parent = &per_clk[1], + .secondary = &sdhc3_clk[1], + }, { + .name = "sdhc_ipg_clk", + .id = 2, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_SDHC3_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk cspi1_clk[] = { + { + .name = "cspi_clk", + .id = 0, + .parent = &per_clk[1], + .secondary = &cspi1_clk[1], + }, { + .name = "cspi_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_CSPI1_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk cspi2_clk[] = { + { + .name = "cspi_clk", + .id = 1, + .parent = &per_clk[1], + .secondary = &cspi2_clk[1], + }, { + .name = "cspi_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_CSPI2_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk cspi3_clk[] = { + { + .name = "cspi_clk", + .id = 2, + .parent = &per_clk[1], + .secondary = &cspi3_clk[1], + }, { + .name = "cspi_ipg_clk", + .id = 2, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_CSPI3_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk lcdc_clk[] = { + { + .name = "lcdc_clk", + .parent = &per_clk[2], + .secondary = &lcdc_clk[1], + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, + }, { + .name = "lcdc_ipg_clk", + .parent = &ipg_clk, + .secondary = &lcdc_clk[2], + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_LCDC_OFFSET, + .disable = _clk_disable, + }, { + .name = "lcdc_ahb_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_HCLK_LCDC_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk csi_clk[] = { + { + .name = "csi_perclk", + .parent = &per_clk[3], + .secondary = &csi_clk[1], + .round_rate = _clk_parent_round_rate, + .set_rate = _clk_parent_set_rate, + }, { + .name = "csi_ahb_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_HCLK_CSI_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk usb_clk[] = { + { + .name = "usb_clk", + .parent = &spll_clk, + .get_rate = _clk_usb_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_USBOTG_OFFSET, + .disable = _clk_disable, + }, { + .name = "usb_ahb_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_HCLK_USBOTG_OFFSET, + .disable = _clk_disable, + } +}; + +static struct clk ssi1_clk[] = { + { + .name = "ssi_clk", + .id = 0, + .parent = &mpll_main_clk[1], + .secondary = &ssi1_clk[1], + .get_rate = _clk_ssi1_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_SSI1_BAUD_OFFSET, + .disable = _clk_disable, + }, { + .name = "ssi_ipg_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_SSI1_IPG_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk ssi2_clk[] = { + { + .name = "ssi_clk", + .id = 1, + .parent = &mpll_main_clk[1], + .secondary = &ssi2_clk[1], + .get_rate = _clk_ssi2_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_SSI2_BAUD_OFFSET, + .disable = _clk_disable, + }, { + .name = "ssi_ipg_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_SSI2_IPG_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk nfc_clk = { + .name = "nfc_clk", + .parent = &cpu_clk, + .get_rate = _clk_nfc_recalc, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_NFC_BAUD_OFFSET, + .disable = _clk_disable, +}; + +static struct clk vpu_clk = { + .name = "vpu_clk", + .parent = &mpll_main_clk[1], + .get_rate = _clk_vpu_recalc, + .enable = _clk_vpu_enable, + .disable = _clk_vpu_disable, +}; + +static struct clk dma_clk = { + .name = "dma_clk", + .parent = &ahb_clk, + .enable = _clk_dma_enable, + .disable = _clk_dma_disable, +}; + +static struct clk rtic_clk = { + .name = "rtic_clk", + .parent = &ahb_clk, + .enable = _clk_rtic_enable, + .disable = _clk_rtic_disable, +}; + +static struct clk brom_clk = { + .name = "brom_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_HCLK_BROM_OFFSET, + .disable = _clk_disable, +}; + +static struct clk emma_clk = { + .name = "emma_clk", + .parent = &ahb_clk, + .enable = _clk_emma_enable, + .disable = _clk_emma_disable, +}; + +static struct clk slcdc_clk = { + .name = "slcdc_clk", + .parent = &ahb_clk, + .enable = _clk_slcdc_enable, + .disable = _clk_slcdc_disable, +}; + +static struct clk fec_clk = { + .name = "fec_clk", + .parent = &ahb_clk, + .enable = _clk_fec_enable, + .disable = _clk_fec_disable, +}; + +static struct clk emi_clk = { + .name = "emi_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_HCLK_EMI_OFFSET, + .disable = _clk_disable, +}; + +static struct clk sahara2_clk = { + .name = "sahara_clk", + .parent = &ahb_clk, + .enable = _clk_sahara2_enable, + .disable = _clk_sahara2_disable, +}; + +static struct clk ata_clk = { + .name = "ata_clk", + .parent = &ahb_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_HCLK_ATA_OFFSET, + .disable = _clk_disable, +}; + +static struct clk mstick1_clk = { + .name = "mstick1_clk", + .parent = &ipg_clk, + .enable = _clk_mstick1_enable, + .disable = _clk_mstick1_disable, +}; + +static struct clk wdog_clk = { + .name = "wdog_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR1_WDT_OFFSET, + .disable = _clk_disable, +}; + +static struct clk gpio_clk = { + .name = "gpio_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR1, + .enable_shift = CCM_PCCR0_GPIO_OFFSET, + .disable = _clk_disable, +}; + +static struct clk i2c_clk[] = { + { + .name = "i2c_clk", + .id = 0, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_I2C1_OFFSET, + .disable = _clk_disable, + }, { + .name = "i2c_clk", + .id = 1, + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_I2C2_OFFSET, + .disable = _clk_disable, + }, +}; + +static struct clk iim_clk = { + .name = "iim_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_IIM_OFFSET, + .disable = _clk_disable, +}; + +static struct clk kpp_clk = { + .name = "kpp_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_KPP_OFFSET, + .disable = _clk_disable, +}; + +static struct clk owire_clk = { + .name = "owire_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_OWIRE_OFFSET, + .disable = _clk_disable, +}; + +static struct clk rtc_clk = { + .name = "rtc_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_RTC_OFFSET, + .disable = _clk_disable, +}; + +static struct clk scc_clk = { + .name = "scc_clk", + .parent = &ipg_clk, + .enable = _clk_enable, + .enable_reg = CCM_PCCR0, + .enable_shift = CCM_PCCR0_SCC_OFFSET, + .disable = _clk_disable, +}; + +static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate) +{ + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + div = parent_rate / rate; + if (parent_rate % rate) + div++; + + if (div > 8) + div = 8; + + return parent_rate / div; +} + +static int _clk_clko_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg; + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = parent_rate / rate; + + if (div > 8 || div < 1 || ((parent_rate / div) != rate)) + return -EINVAL; + div--; + + reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKODIV_MASK; + reg |= div << CCM_PCDR0_CLKODIV_OFFSET; + __raw_writel(reg, CCM_PCDR0); + + return 0; +} + +static unsigned long _clk_clko_recalc(struct clk *clk) +{ + u32 div; + unsigned long parent_rate; + + parent_rate = clk_get_rate(clk->parent); + + div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_CLKODIV_MASK >> + CCM_PCDR0_CLKODIV_OFFSET; + div++; + + return parent_rate / div; +} + +static int _clk_clko_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg; + + reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK; + + if (parent == &ckil_clk) + reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ckih_clk) + reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == mpll_clk.parent) + reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == spll_clk.parent) + reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &mpll_clk) + reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &spll_clk) + reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &cpu_clk) + reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ahb_clk) + reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ipg_clk) + reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &per_clk[0]) + reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &per_clk[1]) + reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &per_clk[2]) + reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &per_clk[3]) + reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ssi1_clk[0]) + reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &ssi2_clk[0]) + reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &nfc_clk) + reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &mstick1_clk) + reg |= 0x11 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &vpu_clk) + reg |= 0x12 << CCM_CCSR_CLKOSEL_OFFSET; + else if (parent == &usb_clk[0]) + reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET; + else + return -EINVAL; + + __raw_writel(reg, CCM_CCSR); + + return 0; +} + +static int _clk_clko_enable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(CCM_PCDR0) | CCM_PCDR0_CLKO_EN; + __raw_writel(reg, CCM_PCDR0); + + return 0; +} + +static void _clk_clko_disable(struct clk *clk) +{ + u32 reg; + + reg = __raw_readl(CCM_PCDR0) & ~CCM_PCDR0_CLKO_EN; + __raw_writel(reg, CCM_PCDR0); +} + +static struct clk clko_clk = { + .name = "clko_clk", + .get_rate = _clk_clko_recalc, + .set_rate = _clk_clko_set_rate, + .round_rate = _clk_clko_round_rate, + .set_parent = _clk_clko_set_parent, + .enable = _clk_clko_enable, + .disable = _clk_clko_disable, +}; + +static struct clk *mxc_clks[] = { + &ckih_clk, + &ckil_clk, + &mpll_clk, + &mpll_main_clk[0], + &mpll_main_clk[1], + &spll_clk, + &cpu_clk, + &ahb_clk, + &ipg_clk, + &per_clk[0], + &per_clk[1], + &per_clk[2], + &per_clk[3], + &clko_clk, + &uart1_clk[0], + &uart1_clk[1], + &uart2_clk[0], + &uart2_clk[1], + &uart3_clk[0], + &uart3_clk[1], + &uart4_clk[0], + &uart4_clk[1], + &uart5_clk[0], + &uart5_clk[1], + &uart6_clk[0], + &uart6_clk[1], + &gpt1_clk[0], + &gpt1_clk[1], + &gpt2_clk[0], + &gpt2_clk[1], + &gpt3_clk[0], + &gpt3_clk[1], + &gpt4_clk[0], + &gpt4_clk[1], + &gpt5_clk[0], + &gpt5_clk[1], + &gpt6_clk[0], + &gpt6_clk[1], + &pwm_clk[0], + &pwm_clk[1], + &sdhc1_clk[0], + &sdhc1_clk[1], + &sdhc2_clk[0], + &sdhc2_clk[1], + &sdhc3_clk[0], + &sdhc3_clk[1], + &cspi1_clk[0], + &cspi1_clk[1], + &cspi2_clk[0], + &cspi2_clk[1], + &cspi3_clk[0], + &cspi3_clk[1], + &lcdc_clk[0], + &lcdc_clk[1], + &lcdc_clk[2], + &csi_clk[0], + &csi_clk[1], + &usb_clk[0], + &usb_clk[1], + &ssi1_clk[0], + &ssi1_clk[1], + &ssi2_clk[0], + &ssi2_clk[1], + &nfc_clk, + &vpu_clk, + &dma_clk, + &rtic_clk, + &brom_clk, + &emma_clk, + &slcdc_clk, + &fec_clk, + &emi_clk, + &sahara2_clk, + &ata_clk, + &mstick1_clk, + &wdog_clk, + &gpio_clk, + &i2c_clk[0], + &i2c_clk[1], + &iim_clk, + &kpp_clk, + &owire_clk, + &rtc_clk, + &scc_clk, +}; + +void __init change_external_low_reference(unsigned long new_ref) +{ + external_low_reference = new_ref; +} + +unsigned long __init clk_early_get_timer_rate(void) +{ + return clk_get_rate(&per_clk[0]); +} + +static void __init probe_mxc_clocks(void) +{ + int i; + + if (mx27_revision() >= CHIP_REV_2_0) { + if (CSCR() & 0x8000) + cpu_clk.parent = &mpll_main_clk[0]; + + if (!(CSCR() & 0x00800000)) + ssi2_clk[0].parent = &spll_clk; + + if (!(CSCR() & 0x00400000)) + ssi1_clk[0].parent = &spll_clk; + + if (!(CSCR() & 0x00200000)) + vpu_clk.parent = &spll_clk; + } else { + cpu_clk.parent = &mpll_clk; + cpu_clk.set_parent = NULL; + cpu_clk.round_rate = NULL; + cpu_clk.set_rate = NULL; + ahb_clk.parent = &mpll_clk; + + for (i = 0; i < sizeof(per_clk) / sizeof(per_clk[0]); i++) + per_clk[i].parent = &mpll_clk; + + ssi1_clk[0].parent = &mpll_clk; + ssi2_clk[0].parent = &mpll_clk; + + vpu_clk.parent = &mpll_clk; + } +} + +/* + * must be called very early to get information about the + * available clock rate when the timer framework starts + */ +int __init mxc_clocks_init(unsigned long fref) +{ + u32 cscr; + struct clk **clkp; + + external_high_reference = fref; + + /* detect clock reference for both system PLL */ + cscr = CSCR(); + if (cscr & CCM_CSCR_MCU) + mpll_clk.parent = &ckih_clk; + else + mpll_clk.parent = &ckil_clk; + + if (cscr & CCM_CSCR_SP) + spll_clk.parent = &ckih_clk; + else + spll_clk.parent = &ckil_clk; + + probe_mxc_clocks(); + + per_clk[0].enable(&per_clk[0]); + gpt1_clk[1].enable(&gpt1_clk[1]); + + for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++) + clk_register(*clkp); + + /* Turn off all possible clocks */ + __raw_writel(CCM_PCCR0_GPT1_MASK, CCM_PCCR0); + __raw_writel(CCM_PCCR1_PERCLK1_MASK | CCM_PCCR1_HCLK_EMI_MASK, + CCM_PCCR1); + spll_clk.disable(&spll_clk); + + /* This will propagate to all children and init all the clock rates */ + + clk_enable(&emi_clk); + clk_enable(&gpio_clk); + clk_enable(&iim_clk); + clk_enable(&gpt1_clk[0]); +#ifdef CONFIG_DEBUG_LL_CONSOLE + clk_enable(&uart1_clk[0]); +#endif + return 0; +} -- cgit v1.2.3 From 80eedae6f0322dafc749140b67986b2472473745 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:03:00 +0200 Subject: i.MX27: Add ADS platform support This patch adds basic support for the Freescale MX27ADS reference board. Currently only a serial console can be used. Signed-off-by: Juergen Beisert --- arch/arm/configs/imx27ads_defconfig | 826 +++++++++++++++++++++++++++++++ arch/arm/mach-mx2/Kconfig | 7 + arch/arm/mach-mx2/Makefile | 2 + arch/arm/mach-mx2/mx27ads.c | 304 ++++++++++++ include/asm-arm/arch-mxc/board-mx27ads.h | 354 +++++++++++++ include/asm-arm/arch-mxc/debug-macro.S | 4 +- 6 files changed, 1496 insertions(+), 1 deletion(-) create mode 100644 arch/arm/configs/imx27ads_defconfig create mode 100644 arch/arm/mach-mx2/mx27ads.c create mode 100644 include/asm-arm/arch-mxc/board-mx27ads.h diff --git a/arch/arm/configs/imx27ads_defconfig b/arch/arm/configs/imx27ads_defconfig new file mode 100644 index 000000000000..bcd95b8dd2df --- /dev/null +++ b/arch/arm/configs/imx27ads_defconfig @@ -0,0 +1,826 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc6 +# Fri Jun 20 16:29:34 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Freescale MXC Implementations +# +CONFIG_ARCH_MX2=y +# CONFIG_ARCH_MX3 is not set + +# +# MX2 family CPU support +# +CONFIG_MACH_MX27=y + +# +# MX2 Platforms +# +CONFIG_MACH_MX27ADS=y +# CONFIG_MACH_PCM038 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_FEC_OLD is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_IMX is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 6e7d724e323e..6f98355d6860 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -9,3 +9,10 @@ config MACH_MX27 comment "MX2 Platforms" depends on ARCH_MX2 + +config MACH_MX27ADS + bool "MX27ADS platform" + depends on MACH_MX27 + help + Include support for MX27ADS platform. This includes specific + configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index 74fb9b3eb066..f6764eb64713 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -8,3 +8,5 @@ obj-y := system.o generic.o devices.o serial.o obj-$(CONFIG_MACH_MX27) += cpu_imx27.o obj-$(CONFIG_MACH_MX27) += clock_imx27.o + +obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c new file mode 100644 index 000000000000..a9ff01fff137 --- /dev/null +++ b/arch/arm/mach-mx2/mx27ads.c @@ -0,0 +1,304 @@ +/* + * Copyright (C) 2000 Deep Blue Solutions Ltd + * Copyright (C) 2002 Shane Nay (shane@minirl.com) + * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* ADS's NOR flash */ +static struct physmap_flash_data mx27ads_flash_data = { + .width = 2, +}; + +static struct resource mx27ads_flash_resource = { + .start = 0xc0000000, + .end = 0xc0000000 + 0x02000000 - 1, + .flags = IORESOURCE_MEM, + +}; + +static struct platform_device mx27ads_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx27ads_flash_data, + }, + .num_resources = 1, + .resource = &mx27ads_flash_resource, +}; + +static int mxc_uart0_pins[] = { + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS +}; + +static int uart_mxc_port0_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, + ARRAY_SIZE(mxc_uart0_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART0"); +} + +static int uart_mxc_port0_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, + ARRAY_SIZE(mxc_uart0_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART0"); +} + +static int mxc_uart1_pins[] = { + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD +}; + +static int uart_mxc_port1_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART1"); +} + +static int uart_mxc_port1_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART1"); +} + +static int mxc_uart2_pins[] = { + PE8_PF_UART3_TXD, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE11_PF_UART3_RTS +}; + +static int uart_mxc_port2_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, + ARRAY_SIZE(mxc_uart2_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART2"); +} + +static int uart_mxc_port2_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, + ARRAY_SIZE(mxc_uart2_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART2"); +} + +static int mxc_uart3_pins[] = { + PB26_AF_UART4_RTS, + PB28_AF_UART4_TXD, + PB29_AF_UART4_CTS, + PB31_AF_UART4_RXD +}; + +static int uart_mxc_port3_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart3_pins, + ARRAY_SIZE(mxc_uart3_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART3"); +} + +static int uart_mxc_port3_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart3_pins, + ARRAY_SIZE(mxc_uart3_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART3"); +} + +static int mxc_uart4_pins[] = { + PB18_AF_UART5_TXD, + PB19_AF_UART5_RXD, + PB20_AF_UART5_CTS, + PB21_AF_UART5_RTS +}; + +static int uart_mxc_port4_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart4_pins, + ARRAY_SIZE(mxc_uart4_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART4"); +} + +static int uart_mxc_port4_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart4_pins, + ARRAY_SIZE(mxc_uart4_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART4"); +} + +static int mxc_uart5_pins[] = { + PB10_AF_UART6_TXD, + PB12_AF_UART6_CTS, + PB11_AF_UART6_RXD, + PB13_AF_UART6_RTS +}; + +static int uart_mxc_port5_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart5_pins, + ARRAY_SIZE(mxc_uart5_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART5"); +} + +static int uart_mxc_port5_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart5_pins, + ARRAY_SIZE(mxc_uart5_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART5"); +} + +static struct platform_device *platform_devices[] __initdata = { + &mx27ads_nor_mtd_device, +}; + +static int mxc_fec_pins[] = { + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_CLR, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN +}; + +static void gpio_fec_active(void) +{ + mxc_gpio_setup_multiple_pins(mxc_fec_pins, + ARRAY_SIZE(mxc_fec_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "FEC"); +} + +static void gpio_fec_inactive(void) +{ + mxc_gpio_setup_multiple_pins(mxc_fec_pins, + ARRAY_SIZE(mxc_fec_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "FEC"); +} + +static struct imxuart_platform_data uart_pdata[] = { + { + .init = uart_mxc_port0_init, + .exit = uart_mxc_port0_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port1_init, + .exit = uart_mxc_port1_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port2_init, + .exit = uart_mxc_port2_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port3_init, + .exit = uart_mxc_port3_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port4_init, + .exit = uart_mxc_port4_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port5_init, + .exit = uart_mxc_port5_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, +}; + +static void __init mx27ads_board_init(void) +{ + int i; + + gpio_fec_active(); + + for (i = 0; i < 6; i++) + imx_init_uart(i, &uart_pdata[i]); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init mx27ads_timer_init(void) +{ + unsigned long fref = 26000000; + + if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0) + fref = 27000000; + + mxc_clocks_init(fref); + mxc_timer_init("gpt_clk.0"); +} + +struct sys_timer mx27ads_timer = { + .init = mx27ads_timer_init, +}; + +static struct map_desc mx27ads_io_desc[] __initdata = { + { + .virtual = PBC_BASE_ADDRESS, + .pfn = __phys_to_pfn(CS4_BASE_ADDR), + .length = SZ_1M, + .type = MT_DEVICE, + }, +}; + +void __init mx27ads_map_io(void) +{ + mxc_map_io(); + iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc)); +} + +MACHINE_START(MX27ADS, "Freescale i.MX27ADS") + /* maintainer: Freescale Semiconductor, Inc. */ + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mx27ads_map_io, + .init_irq = mxc_init_irq, + .init_machine = mx27ads_board_init, + .timer = &mx27ads_timer, +MACHINE_END + diff --git a/include/asm-arm/arch-mxc/board-mx27ads.h b/include/asm-arm/arch-mxc/board-mx27ads.h new file mode 100644 index 000000000000..61e66dac90ef --- /dev/null +++ b/include/asm-arm/arch-mxc/board-mx27ads.h @@ -0,0 +1,354 @@ +/* + * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__ +#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__ + +/* external interrupt multiplexer */ +#define MXC_EXP_IO_BASE (MXC_GPIO_BASE + MXC_MAX_GPIO_LINES) + +#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES) +#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE +#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1) +#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2) + +#define MXC_MAX_BOARD_INTS (MXC_MAX_EXP_IO_LINES + \ + MXC_MAX_VIRTUAL_INTS) + +/* + * MXC UART EVB board level configurations + */ + +#define MXC_LL_EXTUART_PADDR (CS4_BASE_ADDR + 0x20000) +#define MXC_LL_EXTUART_VADDR (CS4_BASE_ADDR_VIRT + 0x20000) +#define MXC_LL_EXTUART_16BIT_BUS + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR) + +/* + * @name Memory Size parameters + */ + +/* + * Size of SDRAM memory + */ +#define SDRAM_MEM_SIZE SZ_128M + +/* + * PBC Controller parameters + */ + +/* + * Base address of PBC controller, CS4 + */ +#define PBC_BASE_ADDRESS 0xEB000000 +#define PBC_REG_ADDR(offset) (PBC_BASE_ADDRESS + (offset)) + +/* + * PBC Interupt name definitions + */ +#define PBC_GPIO1_0 0 +#define PBC_GPIO1_1 1 +#define PBC_GPIO1_2 2 +#define PBC_GPIO1_3 3 +#define PBC_GPIO1_4 4 +#define PBC_GPIO1_5 5 + +#define PBC_INTR_MAX_NUM 6 +#define PBC_INTR_SHARED_MAX_NUM 8 + +/* When the PBC address connection is fixed in h/w, defined as 1 */ +#define PBC_ADDR_SH 0 + +/* Offsets for the PBC Controller register */ +/* + * PBC Board version register offset + */ +#define PBC_VERSION_REG PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH) +/* + * PBC Board control register 1 set address. + */ +#define PBC_BCTRL1_SET_REG PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH) +/* + * PBC Board control register 1 clear address. + */ +#define PBC_BCTRL1_CLEAR_REG PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH) +/* + * PBC Board control register 2 set address. + */ +#define PBC_BCTRL2_SET_REG PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH) +/* + * PBC Board control register 2 clear address. + */ +#define PBC_BCTRL2_CLEAR_REG PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH) +/* + * PBC Board control register 3 set address. + */ +#define PBC_BCTRL3_SET_REG PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH) +/* + * PBC Board control register 3 clear address. + */ +#define PBC_BCTRL3_CLEAR_REG PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH) +/* + * PBC Board control register 3 set address. + */ +#define PBC_BCTRL4_SET_REG PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH) +/* + * PBC Board control register 4 clear address. + */ +#define PBC_BCTRL4_CLEAR_REG PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH) +/*PBC_ADDR_SH + * PBC Board status register 1. + */ +#define PBC_BSTAT1_REG PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH) +/* + * PBC Board interrupt status register. + */ +#define PBC_INTSTATUS_REG PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH) +/* + * PBC Board interrupt current status register. + */ +#define PBC_INTCURR_STATUS_REG PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH) +/* + * PBC Interrupt mask register set address. + */ +#define PBC_INTMASK_SET_REG PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH) +/* + * PBC Interrupt mask register clear address. + */ +#define PBC_INTMASK_CLEAR_REG PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH) +/* + * External UART A. + */ +#define PBC_SC16C652_UARTA_REG PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH) +/* + * UART 4 Expanding Signal Status. + */ +#define PBC_UART_STATUS_REG PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH) +/* + * UART 4 Expanding Signal Control Set. + */ +#define PBC_UCTRL_SET_REG PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH) +/* + * UART 4 Expanding Signal Control Clear. + */ +#define PBC_UCTRL_CLR_REG PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH) +/* + * Ethernet Controller IO base address. + */ +#define PBC_CS8900A_IOBASE_REG PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH) +/* + * Ethernet Controller Memory base address. + */ +#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH) +/* + * Ethernet Controller DMA base address. + */ +#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH) + +/* PBC Board Version Register bit definition */ +#define PBC_VERSION_ADS 0x8000 /* Bit15=1 means version for ads */ +#define PBC_VERSION_EVB_REVB 0x4000 /* BIT14=1 means version for evb revb */ + +/* PBC Board Control Register 1 bit definitions */ +#define PBC_BCTRL1_ERST 0x0001 /* Ethernet Reset */ +#define PBC_BCTRL1_URST 0x0002 /* Reset External UART controller */ +#define PBC_BCTRL1_FRST 0x0004 /* FEC Reset */ +#define PBC_BCTRL1_ESLEEP 0x0010 /* Enable ethernet Sleep */ +#define PBC_BCTRL1_LCDON 0x0800 /* Enable the LCD */ + +/* PBC Board Control Register 2 bit definitions */ +#define PBC_BCTRL2_VCC_EN 0x0004 /* Enable VCC */ +#define PBC_BCTRL2_VPP_EN 0x0008 /* Enable Vpp */ +#define PBC_BCTRL2_ATAFEC_EN 0X0010 +#define PBC_BCTRL2_ATAFEC_SEL 0X0020 +#define PBC_BCTRL2_ATA_EN 0X0040 +#define PBC_BCTRL2_IRDA_SD 0X0080 +#define PBC_BCTRL2_IRDA_EN 0X0100 +#define PBC_BCTRL2_CCTL10 0X0200 +#define PBC_BCTRL2_CCTL11 0X0400 + +/* PBC Board Control Register 3 bit definitions */ +#define PBC_BCTRL3_HSH_EN 0X0020 +#define PBC_BCTRL3_FSH_MOD 0X0040 +#define PBC_BCTRL3_OTG_HS_EN 0X0080 +#define PBC_BCTRL3_OTG_VBUS_EN 0X0100 +#define PBC_BCTRL3_FSH_VBUS_EN 0X0200 +#define PBC_BCTRL3_USB_OTG_ON 0X0800 +#define PBC_BCTRL3_USB_FSH_ON 0X1000 + +/* PBC Board Control Register 4 bit definitions */ +#define PBC_BCTRL4_REGEN_SEL 0X0001 +#define PBC_BCTRL4_USER_OFF 0X0002 +#define PBC_BCTRL4_VIB_EN 0X0004 +#define PBC_BCTRL4_PWRGT1_EN 0X0008 +#define PBC_BCTRL4_PWRGT2_EN 0X0010 +#define PBC_BCTRL4_STDBY_PRI 0X0020 + +#ifndef __ASSEMBLY__ +/* + * Enumerations for SD cards and memory stick card. This corresponds to + * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN. + */ +enum mxc_card_no { + MXC_CARD_SD2 = 0, + MXC_CARD_SD3, + MXC_CARD_MS, + MXC_CARD_SD1, + MXC_CARD_MIN = MXC_CARD_SD2, + MXC_CARD_MAX = MXC_CARD_SD1, +}; +#endif + +#define MXC_CPLD_VER_1_50 0x01 + +/* + * PBC BSTAT Register bit definitions + */ +#define PBC_BSTAT_PRI_INT 0X0001 +#define PBC_BSTAT_USB_BYP 0X0002 +#define PBC_BSTAT_ATA_IOCS16 0X0004 +#define PBC_BSTAT_ATA_CBLID 0X0008 +#define PBC_BSTAT_ATA_DASP 0X0010 +#define PBC_BSTAT_PWR_RDY 0X0020 +#define PBC_BSTAT_SD3_WP 0X0100 +#define PBC_BSTAT_SD2_WP 0X0200 +#define PBC_BSTAT_SD1_WP 0X0400 +#define PBC_BSTAT_SD3_DET 0X0800 +#define PBC_BSTAT_SD2_DET 0X1000 +#define PBC_BSTAT_SD1_DET 0X2000 +#define PBC_BSTAT_MS_DET 0X4000 +#define PBC_BSTAT_SD3_DET_BIT 11 +#define PBC_BSTAT_SD2_DET_BIT 12 +#define PBC_BSTAT_SD1_DET_BIT 13 +#define PBC_BSTAT_MS_DET_BIT 14 +#define MXC_BSTAT_BIT(n) ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \ + ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \ + ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \ + ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \ + 0x0)))) + +/* + * PBC UART Control Register bit definitions + */ +#define PBC_UCTRL_DCE_DCD 0X0001 +#define PBC_UCTRL_DCE_DSR 0X0002 +#define PBC_UCTRL_DCE_RI 0X0004 +#define PBC_UCTRL_DTE_DTR 0X0100 + +/* + * PBC UART Status Register bit definitions + */ +#define PBC_USTAT_DTE_DCD 0X0001 +#define PBC_USTAT_DTE_DSR 0X0002 +#define PBC_USTAT_DTE_RI 0X0004 +#define PBC_USTAT_DCE_DTR 0X0100 + +/* + * PBC Interupt mask register bit definitions + */ +#define PBC_INTR_SD3_R_EN_BIT 4 +#define PBC_INTR_SD2_R_EN_BIT 0 +#define PBC_INTR_SD1_R_EN_BIT 6 +#define PBC_INTR_MS_R_EN_BIT 5 +#define PBC_INTR_SD3_EN_BIT 13 +#define PBC_INTR_SD2_EN_BIT 12 +#define PBC_INTR_MS_EN_BIT 14 +#define PBC_INTR_SD1_EN_BIT 15 + +#define PBC_INTR_SD2_R_EN 0x0001 +#define PBC_INTR_LOW_BAT 0X0002 +#define PBC_INTR_OTG_FSOVER 0X0004 +#define PBC_INTR_FSH_OVER 0X0008 +#define PBC_INTR_SD3_R_EN 0x0010 +#define PBC_INTR_MS_R_EN 0x0020 +#define PBC_INTR_SD1_R_EN 0x0040 +#define PBC_INTR_FEC_INT 0X0080 +#define PBC_INTR_ENET_INT 0X0100 +#define PBC_INTR_OTGFS_INT 0X0200 +#define PBC_INTR_XUART_INT 0X0400 +#define PBC_INTR_CCTL12 0X0800 +#define PBC_INTR_SD2_EN 0x1000 +#define PBC_INTR_SD3_EN 0x2000 +#define PBC_INTR_MS_EN 0x4000 +#define PBC_INTR_SD1_EN 0x8000 + + + +/* For interrupts like xuart, enet etc */ +#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX27_PIN_TIN) +#define MXC_MAX_EXP_IO_LINES 16 + +/* + * This corresponds to PBC_INTMASK_SET_REG at offset 0x38. + * + */ +#define EXPIO_INT_LOW_BAT (MXC_EXP_IO_BASE + 1) +#define EXPIO_INT_OTG_FS_OVR (MXC_EXP_IO_BASE + 2) +#define EXPIO_INT_FSH_OVR (MXC_EXP_IO_BASE + 3) +#define EXPIO_INT_RES4 (MXC_EXP_IO_BASE + 4) +#define EXPIO_INT_RES5 (MXC_EXP_IO_BASE + 5) +#define EXPIO_INT_RES6 (MXC_EXP_IO_BASE + 6) +#define EXPIO_INT_FEC (MXC_EXP_IO_BASE + 7) +#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) +#define EXPIO_INT_OTG_FS_INT (MXC_EXP_IO_BASE + 9) +#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) +#define EXPIO_INT_CCTL12_INT (MXC_EXP_IO_BASE + 11) +#define EXPIO_INT_SD2_EN (MXC_EXP_IO_BASE + 12) +#define EXPIO_INT_SD3_EN (MXC_EXP_IO_BASE + 13) +#define EXPIO_INT_MS_EN (MXC_EXP_IO_BASE + 14) +#define EXPIO_INT_SD1_EN (MXC_EXP_IO_BASE + 15) + +/* + * This is System IRQ used by CS8900A for interrupt generation + * taken from platform.h + */ +#define CS8900AIRQ EXPIO_INT_ENET_INT +/* This is I/O Base address used to access registers of CS8900A on MXC ADS */ +#define CS8900A_BASE_ADDRESS (PBC_CS8900A_IOBASE_REG + 0x300) + +#define MXC_PMIC_INT_LINE IOMUX_TO_IRQ(MX27_PIN_TOUT) + +/* +* This is used to detect if the CPLD version is for mx27 evb board rev-a +*/ +#define PBC_CPLD_VERSION_IS_REVA() \ + ((__raw_readw(PBC_VERSION_REG) & \ + (PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\ + == 0) + +/* This is used to active or inactive ata signal in CPLD . + * It is dependent with hardware + */ +#define PBC_ATA_SIGNAL_ACTIVE() \ + __raw_writew( \ + PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ + PBC_BCTRL2_CLEAR_REG) + +#define PBC_ATA_SIGNAL_INACTIVE() \ + __raw_writew( \ + PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \ + PBC_BCTRL2_SET_REG) + +#define MXC_BD_LED1 (1 << 5) +#define MXC_BD_LED2 (1 << 6) +#define MXC_BD_LED_ON(led) \ + __raw_writew(led, PBC_BCTRL1_SET_REG) +#define MXC_BD_LED_OFF(led) \ + __raw_writew(led, PBC_BCTRL1_CLEAR_REG) + +/* to determine the correct external crystal reference */ +#define CKIH_27MHZ_BIT_SET (1 << 3) + +#endif /* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */ diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S index 5add48b6665d..c6c568051434 100644 --- a/include/asm-arm/arch-mxc/debug-macro.S +++ b/include/asm-arm/arch-mxc/debug-macro.S @@ -22,7 +22,9 @@ #ifdef CONFIG_MACH_MX31LITE #include #endif - +#ifdef CONFIG_MACH_MX27ADS +#include +#endif .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? -- cgit v1.2.3 From 7e5e9f5457f5cd019fd7e2f3da94e9fc72cc9ff6 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:03:00 +0200 Subject: i.MX27: Adding PCM038 platform support This patch adds support for the phyCORE-i.MX27 cpu module (aka pcm038). It is as generic as possible in order to support any kind of baseboard. Note: This CPU module implementation can't work without a baseboard support. Baseboard support can be added by the PCM-970 (included in this patch stack) or any custom variant. Signed-off-by: Juergen Beisert --- arch/arm/configs/pcm038_defconfig | 1008 +++++++++++++++++++++++++++++++ arch/arm/mach-mx2/Kconfig | 7 + arch/arm/mach-mx2/Makefile | 1 + arch/arm/mach-mx2/pcm038.c | 200 ++++++ include/asm-arm/arch-mxc/board-pcm038.h | 36 ++ include/asm-arm/arch-mxc/debug-macro.S | 3 + 6 files changed, 1255 insertions(+) create mode 100644 arch/arm/configs/pcm038_defconfig create mode 100644 arch/arm/mach-mx2/pcm038.c create mode 100644 include/asm-arm/arch-mxc/board-pcm038.h diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/pcm038_defconfig new file mode 100644 index 000000000000..6b798c215ca8 --- /dev/null +++ b/arch/arm/configs/pcm038_defconfig @@ -0,0 +1,1008 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc6 +# Fri Jun 20 16:38:36 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_MARKERS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +CONFIG_ARCH_MXC=y +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Boot options +# + +# +# Power management +# + +# +# Freescale MXC Implementations +# +CONFIG_ARCH_MX2=y +# CONFIG_ARCH_MX3 is not set + +# +# MX2 family CPU support +# +CONFIG_MACH_MX27=y + +# +# MX2 Platforms +# +# CONFIG_MACH_MX27ADS is not set +CONFIG_MACH_PCM038=y +CONFIG_MACH_PCM970_BASEBOARD=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_ARM926T=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5TJ=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_CACHE_ROUND_ROBIN is not set +# CONFIG_OUTER_CACHE is not set + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_VFP is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_AX88796 is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_FEC_OLD=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_IMX=y +CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_RADIO_ADAPTERS is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 6f98355d6860..4c19e1c79471 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -16,3 +16,10 @@ config MACH_MX27ADS help Include support for MX27ADS platform. This includes specific configurations for the board and its peripherals. + +config MACH_PCM038 + bool "Phytec phyCORE-i.MX27 CPU module (pcm038)" + depends on MACH_MX27 + help + Include support for phyCORE-i.MX27 (aka pcm038) platform. This + includes specific configurations for the module and its peripherals. diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index f6764eb64713..f8d3836ee2f5 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_MACH_MX27) += cpu_imx27.o obj-$(CONFIG_MACH_MX27) += clock_imx27.o obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o +obj-$(CONFIG_MACH_PCM038) += pcm038.o diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c new file mode 100644 index 000000000000..46fc026138cc --- /dev/null +++ b/arch/arm/mach-mx2/pcm038.c @@ -0,0 +1,200 @@ +/* + * Copyright 2007 Robert Schwebel , Pengutronix + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Phytec's phyCORE-i.MX27 comes with 32MiB flash, + * 16 bit width + */ +static struct physmap_flash_data pcm038_flash_data = { + .width = 2, +}; + +static struct resource pcm038_flash_resource = { + .start = 0xc0000000, + .end = 0xc1ffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device pcm038_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &pcm038_flash_data, + }, + .num_resources = 1, + .resource = &pcm038_flash_resource, +}; + +static int mxc_uart0_pins[] = { + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS +}; + +static int uart_mxc_port0_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, + ARRAY_SIZE(mxc_uart0_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART0"); +} + +static int uart_mxc_port0_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart0_pins, + ARRAY_SIZE(mxc_uart0_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART0"); +} + +static int mxc_uart1_pins[] = { + PE3_PF_UART2_CTS, + PE4_PF_UART2_RTS, + PE6_PF_UART2_TXD, + PE7_PF_UART2_RXD +}; + +static int uart_mxc_port1_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART1"); +} + +static int uart_mxc_port1_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART1"); +} + +static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS, + PE9_PF_UART3_RXD, + PE10_PF_UART3_CTS, + PE9_PF_UART3_RXD }; + +static int uart_mxc_port2_init(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, + ARRAY_SIZE(mxc_uart2_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "UART2"); +} + +static int uart_mxc_port2_exit(struct platform_device *pdev) +{ + return mxc_gpio_setup_multiple_pins(mxc_uart2_pins, + ARRAY_SIZE(mxc_uart2_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "UART2"); +} + +static struct imxuart_platform_data uart_pdata[] = { + { + .init = uart_mxc_port0_init, + .exit = uart_mxc_port0_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port1_init, + .exit = uart_mxc_port1_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, { + .init = uart_mxc_port2_init, + .exit = uart_mxc_port2_exit, + .flags = IMXUART_HAVE_RTSCTS, + }, +}; + +static int mxc_fec_pins[] = { + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_CLR, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN +}; + +static void gpio_fec_active(void) +{ + mxc_gpio_setup_multiple_pins(mxc_fec_pins, + ARRAY_SIZE(mxc_fec_pins), + MXC_GPIO_ALLOC_MODE_NORMAL, "FEC"); +} + +static void gpio_fec_inactive(void) +{ + mxc_gpio_setup_multiple_pins(mxc_fec_pins, + ARRAY_SIZE(mxc_fec_pins), + MXC_GPIO_ALLOC_MODE_RELEASE, "FEC"); +} + +static struct platform_device *platform_devices[] __initdata = { + &pcm038_nor_mtd_device, +}; + +static void __init pcm038_init(void) +{ + int i; + gpio_fec_active(); + + for (i = 0; i < 3; i++) + imx_init_uart(i, &uart_pdata[i]); + + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init pcm038_timer_init(void) +{ + mxc_clocks_init(26000000); + mxc_timer_init("gpt_clk.0"); +} + +struct sys_timer pcm038_timer = { + .init = pcm038_timer_init, +}; + +MACHINE_START(PCM038, "phyCORE-i.MX27") + .phys_io = AIPI_BASE_ADDR, + .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = PHYS_OFFSET + 0x100, + .map_io = mxc_map_io, + .init_irq = mxc_init_irq, + .init_machine = pcm038_init, + .timer = &pcm038_timer, +MACHINE_END diff --git a/include/asm-arm/arch-mxc/board-pcm038.h b/include/asm-arm/arch-mxc/board-pcm038.h new file mode 100644 index 000000000000..300467e8db66 --- /dev/null +++ b/include/asm-arm/arch-mxc/board-pcm038.h @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__ +#define __ASM_ARCH_MXC_BOARD_PCM038_H__ + +/* mandatory for CONFIG_LL_DEBUG */ + +#define MXC_LL_UART_PADDR UART1_BASE_ADDR +#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000) + +#ifndef __ASSEMBLY__ +/* + * This CPU module needs a baseboard to work. After basic initializing + * its own devices, it calls baseboard's init function. + * TODO: Add your own baseboard init function and call it from + * inside pcm038_init(). + */ +#endif + +#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */ diff --git a/include/asm-arm/arch-mxc/debug-macro.S b/include/asm-arm/arch-mxc/debug-macro.S index c6c568051434..575087f8561a 100644 --- a/include/asm-arm/arch-mxc/debug-macro.S +++ b/include/asm-arm/arch-mxc/debug-macro.S @@ -24,6 +24,9 @@ #endif #ifdef CONFIG_MACH_MX27ADS #include +#endif +#ifdef CONFIG_MACH_PCM038 +#include #endif .macro addruart,rx mrc p15, 0, \rx, c1, c0 -- cgit v1.2.3 From ff6552e4f3505da9c2886098773146be71c872e3 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:03:01 +0200 Subject: i.MX27 family: Add the Phytec PCM970 evaluation board The Phytec phyCORE-i.MX27 CPU module is delivered with the PCM970 baseboard by default. This patch adds support for the hardware. This code is only an empty stub; it is filled up with functionality in a later patch series. Signed-off-by: Juergen Beisert --- arch/arm/mach-mx2/Kconfig | 14 ++++++++++++++ arch/arm/mach-mx2/Makefile | 1 + arch/arm/mach-mx2/pcm038.c | 4 ++++ arch/arm/mach-mx2/pcm970-baseboard.c | 32 ++++++++++++++++++++++++++++++++ include/asm-arm/arch-mxc/board-pcm038.h | 5 +++++ 5 files changed, 56 insertions(+) create mode 100644 arch/arm/mach-mx2/pcm970-baseboard.c diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig index 4c19e1c79471..1eaa97cb716d 100644 --- a/arch/arm/mach-mx2/Kconfig +++ b/arch/arm/mach-mx2/Kconfig @@ -23,3 +23,17 @@ config MACH_PCM038 help Include support for phyCORE-i.MX27 (aka pcm038) platform. This includes specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_PCM038 + default MACH_PCM970_BASEBOARD + +config MACH_PCM970_BASEBOARD + prompt "PHYTEC PCM970 development board" + bool + help + This adds board specific devices that can be found on Phytec's + PCM970 evaluation board. + +endchoice diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile index f8d3836ee2f5..382d86080e86 100644 --- a/arch/arm/mach-mx2/Makefile +++ b/arch/arm/mach-mx2/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_MACH_MX27) += clock_imx27.o obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o obj-$(CONFIG_MACH_PCM038) += pcm038.o +obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c index 46fc026138cc..a9a28f58e714 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/pcm038.c @@ -177,6 +177,10 @@ static void __init pcm038_init(void) imx_init_uart(i, &uart_pdata[i]); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + +#ifdef CONFIG_MACH_PCM970_BASEBOARD + pcm970_baseboard_init(); +#endif } static void __init pcm038_timer_init(void) diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c new file mode 100644 index 000000000000..028ac4d33684 --- /dev/null +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#include +#include +#include +#include + +/* + * system init for baseboard usage. Will be called by pcm038 init. + * + * Add platform devices present on this baseboard and init + * them from CPU side as far as required to use them later on + */ +void __init pcm970_baseboard_init(void) +{ +} diff --git a/include/asm-arm/arch-mxc/board-pcm038.h b/include/asm-arm/arch-mxc/board-pcm038.h index 300467e8db66..750c62afd90f 100644 --- a/include/asm-arm/arch-mxc/board-pcm038.h +++ b/include/asm-arm/arch-mxc/board-pcm038.h @@ -30,7 +30,12 @@ * its own devices, it calls baseboard's init function. * TODO: Add your own baseboard init function and call it from * inside pcm038_init(). + * + * This example here is for the development board. Refer pcm970-baseboard.c */ + +extern void pcm970_baseboard_init(void); + #endif #endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */ -- cgit v1.2.3 From 1bd55a436f1f90de0e7f476e514e01bd67497b88 Mon Sep 17 00:00:00 2001 From: Juergen Beisert Date: Sat, 5 Jul 2008 10:03:02 +0200 Subject: i.MX2 family: Add basic mach support This patch adds basic mach support for the mx2 processor family, based on the original freescale code and adapted to mainline kernel coding style. This part adds the global build only. Signed-off-by: Juergen Beisert --- arch/arm/Makefile | 1 + arch/arm/mm/Kconfig | 4 ++-- arch/arm/plat-mxc/Kconfig | 8 +++++++- 3 files changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index e72db27e0ba0..009d4feb9547 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -137,6 +137,7 @@ endif machine-$(CONFIG_ARCH_DAVINCI) := davinci machine-$(CONFIG_ARCH_KS8695) := ks8695 incdir-$(CONFIG_ARCH_MXC) := mxc + machine-$(CONFIG_ARCH_MX2) := mx2 machine-$(CONFIG_ARCH_MX3) := mx3 machine-$(CONFIG_ARCH_ORION5X) := orion5x machine-$(CONFIG_ARCH_MSM7X00A) := msm diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 33ed048502a3..68ea247bdd8e 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -180,8 +180,8 @@ config CPU_ARM925T # ARM926T config CPU_ARM926T bool "Support ARM926T processor" - depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI - default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI + depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2 + default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2 select CPU_32v5 select CPU_ABRT_EV5TJ select CPU_PABRT_NOIFAR diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index bb6e12738fb3..e14eaad11dd5 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -3,9 +3,14 @@ if ARCH_MXC menu "Freescale MXC Implementations" choice - prompt "MXC/iMX System Type" + prompt "MXC/iMX Base Type" default ARCH_MX3 +config ARCH_MX2 + bool "MX2-based" + help + This enables support for systems based on the Freescale i.MX2 family + config ARCH_MX3 bool "MX3-based" help @@ -13,6 +18,7 @@ config ARCH_MX3 endchoice +source "arch/arm/mach-mx2/Kconfig" source "arch/arm/mach-mx3/Kconfig" endmenu -- cgit v1.2.3 From 7cd95f56cb61f5348d062527c9d3653196f6e629 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 5 Jul 2008 20:30:51 +0200 Subject: ide: fix hwif->gendev refcounting class->dev_release is called by device_release() iff dev->release is not present so ide_port_class_release() is never called and the last hwif->gendev reference is not dropped. Fix it by removing ide_port_class_release() and get_device() call from ide_register_port() (device_create_drvdata() takes a hwif->gendev reference anyway). This patch fixes hang on wait_for_completion(&hwif->gendev_rel_comp) in ide_unregister() reported by Pavel Machek. Cc: Pavel Machek Cc: "Rafael J. Wysocki" Cc: Greg KH Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 2 -- drivers/ide/ide.c | 8 -------- 2 files changed, 10 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 380fa0c8cc84..d27061b39324 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -646,8 +646,6 @@ static int ide_register_port(ide_hwif_t *hwif) goto out; } - get_device(&hwif->gendev); - hwif->portdev = device_create_drvdata(ide_port_class, &hwif->gendev, MKDEV(0, 0), hwif, hwif->name); if (IS_ERR(hwif->portdev)) { diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index c758dcb13b14..246077792e21 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1094,13 +1094,6 @@ struct bus_type ide_bus_type = { EXPORT_SYMBOL_GPL(ide_bus_type); -static void ide_port_class_release(struct device *portdev) -{ - ide_hwif_t *hwif = dev_get_drvdata(portdev); - - put_device(&hwif->gendev); -} - int ide_vlb_clk; EXPORT_SYMBOL_GPL(ide_vlb_clk); @@ -1305,7 +1298,6 @@ static int __init ide_init(void) ret = PTR_ERR(ide_port_class); goto out_port_class; } - ide_port_class->dev_release = ide_port_class_release; init_ide_data(); -- cgit v1.2.3 From bd8a59e29726b2a5ff7baefe995febdc63044a61 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 5 Jul 2008 20:30:51 +0200 Subject: ide: ide_unregister() warm-plug bugfix Fix ide_unregister() to work for ports with no devices attached to them. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 246077792e21..b31359c9fa58 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -315,13 +315,14 @@ void ide_unregister(ide_hwif_t *hwif) BUG_ON(in_interrupt()); BUG_ON(irqs_disabled()); + mutex_lock(&ide_cfg_mtx); - spin_lock_irq(&ide_lock); - if (!hwif->present) - goto abort; - __ide_port_unregister_devices(hwif); - hwif->present = 0; + spin_lock_irq(&ide_lock); + if (hwif->present) { + __ide_port_unregister_devices(hwif); + hwif->present = 0; + } spin_unlock_irq(&ide_lock); ide_proc_unregister_port(hwif); @@ -359,7 +360,6 @@ void ide_unregister(ide_hwif_t *hwif) /* restore hwif data to pristine status */ ide_init_port_data(hwif, hwif->index); -abort: spin_unlock_irq(&ide_lock); mutex_unlock(&ide_cfg_mtx); } -- cgit v1.2.3 From 2b54ed9467697b0ce2d60d89e5e4253c9e322c26 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 5 Jul 2008 20:30:51 +0200 Subject: ide: ide_unregister() locking bugfix Holding ide_lock for ide_release_dma_engine() call is unnecessary and triggers WARN_ON(irqs_disabled()) in dma_free_coherent(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index b31359c9fa58..300431d080a9 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -352,15 +352,15 @@ void ide_unregister(ide_hwif_t *hwif) blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<sg_table); unregister_blkdev(hwif->major, hwif->name); - spin_lock_irq(&ide_lock); if (hwif->dma_base) ide_release_dma_engine(hwif); + spin_lock_irq(&ide_lock); /* restore hwif data to pristine status */ ide_init_port_data(hwif, hwif->index); - spin_unlock_irq(&ide_lock); + mutex_unlock(&ide_cfg_mtx); } -- cgit v1.2.3 From d28f87aa87ce8b196349d7c306a7e6fe3abd7155 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 5 Jul 2008 13:10:50 +0900 Subject: ahci: give another shot at clearing all bits in irq_stat Commit ea0c62f7cf70f13a67830471b613337bd0c9a62e tried to clear all bits in irq_stat but it didn't actually achieve that as irq_stat was anded with port_map right after read. This patch makes ahci driver always use the unmasked value to clear irq_status. While at it, add explanation on the peculiarities of ahci IRQ clearing. This was spotted by Linus Torvalds. Signed-off-by: Tejun Heo Signed-off-by: Linus Torvalds --- drivers/ata/ahci.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 061817a3a0e5..5e6468a7ca4b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1777,7 +1777,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) struct ahci_host_priv *hpriv; unsigned int i, handled = 0; void __iomem *mmio; - u32 irq_stat; + u32 irq_stat, irq_masked; VPRINTK("ENTER\n"); @@ -1786,16 +1786,17 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) /* sigh. 0xffffffff is a valid return from h/w */ irq_stat = readl(mmio + HOST_IRQ_STAT); - irq_stat &= hpriv->port_map; if (!irq_stat) return IRQ_NONE; + irq_masked = irq_stat & hpriv->port_map; + spin_lock(&host->lock); for (i = 0; i < host->n_ports; i++) { struct ata_port *ap; - if (!(irq_stat & (1 << i))) + if (!(irq_masked & (1 << i))) continue; ap = host->ports[i]; @@ -1812,6 +1813,15 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) handled = 1; } + /* HOST_IRQ_STAT behaves as level triggered latch meaning that + * it should be cleared after all the port events are cleared; + * otherwise, it will raise a spurious interrupt after each + * valid one. Please read section 10.6.2 of ahci 1.1 for more + * information. + * + * Also, use the unmasked value to clear interrupt as spurious + * pending event on a dummy port might cause screaming IRQ. + */ writel(irq_stat, mmio + HOST_IRQ_STAT); spin_unlock(&host->lock); -- cgit v1.2.3 From 20cbc972617069c1ed434f62151e4de57d26ea46 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 5 Jul 2008 12:29:05 -0700 Subject: Fix clear_refs_write() use of struct mm_walk Don't use a static entry, so as to prevent races during concurrent use of this function. Reported-by: Alexey Dobriyan Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/task_mmu.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index ab8ccc9d14ff..05053d701ac5 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -476,10 +476,10 @@ static ssize_t clear_refs_write(struct file *file, const char __user *buf, return -ESRCH; mm = get_task_mm(task); if (mm) { - static struct mm_walk clear_refs_walk; - memset(&clear_refs_walk, 0, sizeof(clear_refs_walk)); - clear_refs_walk.pmd_entry = clear_refs_pte_range; - clear_refs_walk.mm = mm; + struct mm_walk clear_refs_walk = { + .pmd_entry = clear_refs_pte_range, + .mm = mm, + }; down_read(&mm->mmap_sem); for (vma = mm->mmap; vma; vma = vma->vm_next) { clear_refs_walk.private = vma; -- cgit v1.2.3 From ca31e146d5c2fe51498e619eb3a64782d02e310a Mon Sep 17 00:00:00 2001 From: Eduard - Gabriel Munteanu Date: Sat, 5 Jul 2008 12:14:23 +0300 Subject: Move _RET_IP_ and _THIS_IP_ to include/linux/kernel.h These two macros are useful beyond lock debugging. Moved definitions from include/linux/debug_locks.h to include/linux/kernel.h, so code that needs them does not have to include the former, which would have been a less intuitive choice of a header. Signed-off-by: Eduard - Gabriel Munteanu Acked-by: Pekka Enberg Signed-off-by: Linus Torvalds --- include/linux/debug_locks.h | 10 ++-------- include/linux/kernel.h | 3 +++ 2 files changed, 5 insertions(+), 8 deletions(-) diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index f4a5871767f5..4aaa4afb1cb9 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -1,6 +1,8 @@ #ifndef __LINUX_DEBUG_LOCKING_H #define __LINUX_DEBUG_LOCKING_H +#include + struct task_struct; extern int debug_locks; @@ -11,14 +13,6 @@ extern int debug_locks_silent; */ extern int debug_locks_off(void); -/* - * In the debug case we carry the caller's instruction pointer into - * other functions, but we dont want the function argument overhead - * in the nondebug case - hence these macros: - */ -#define _RET_IP_ (unsigned long)__builtin_return_address(0) -#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; }) - #define DEBUG_LOCKS_WARN_ON(c) \ ({ \ int __ret = 0; \ diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 792bf0aa779b..2e70006c7fa8 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -46,6 +46,9 @@ extern const char linux_proc_banner[]; #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) +#define _RET_IP_ (unsigned long)__builtin_return_address(0) +#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; }) + #ifdef CONFIG_LBD # include # define sector_div(a, b) do_div(a, b) -- cgit v1.2.3 From 5d7e0d2bd98ef4f5a16ac9da1987ae655368dd6a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 5 Jul 2008 01:02:01 -0700 Subject: Fix pagemap_read() use of struct mm_walk Fix some issues in pagemap_read noted by Alexey: - initialize pagemap_walk.mm to "mm" , so the code starts working as advertised - initialize ->private to "&pm" so it wouldn't immediately oops in pagemap_pte_hole() - unstatic struct pagemap_walk, so two threads won't fsckup each other (including those started by root, including flipping ->mm when you don't have permissions) - pagemap_read() contains two calls to ptrace_may_attach(), second one looks unneeded. - avoid possible kmalloc(0) and integer wraparound. Cc: Alexey Dobriyan Cc: Matt Mackall Signed-off-by: Andrew Morton [ Personally, I'd just remove the functionality entirely - Linus ] Signed-off-by: Linus Torvalds --- fs/proc/task_mmu.c | 72 ++++++++++++++++++++++++++++-------------------------- 1 file changed, 38 insertions(+), 34 deletions(-) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 05053d701ac5..c492449f3b45 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -602,11 +602,6 @@ static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, return err; } -static struct mm_walk pagemap_walk = { - .pmd_entry = pagemap_pte_range, - .pte_hole = pagemap_pte_hole -}; - /* * /proc/pid/pagemap - an array mapping virtual pages to pfns * @@ -641,6 +636,11 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, struct pagemapread pm; int pagecount; int ret = -ESRCH; + struct mm_walk pagemap_walk; + unsigned long src; + unsigned long svpfn; + unsigned long start_vaddr; + unsigned long end_vaddr; if (!task) goto out; @@ -659,11 +659,15 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, if (!mm) goto out_task; - ret = -ENOMEM; + uaddr = (unsigned long)buf & PAGE_MASK; uend = (unsigned long)(buf + count); pagecount = (PAGE_ALIGN(uend) - uaddr) / PAGE_SIZE; - pages = kmalloc(pagecount * sizeof(struct page *), GFP_KERNEL); + ret = 0; + if (pagecount == 0) + goto out_mm; + pages = kcalloc(pagecount, sizeof(struct page *), GFP_KERNEL); + ret = -ENOMEM; if (!pages) goto out_mm; @@ -684,33 +688,33 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, pm.out = (u64 *)buf; pm.end = (u64 *)(buf + count); - if (!ptrace_may_attach(task)) { - ret = -EIO; - } else { - unsigned long src = *ppos; - unsigned long svpfn = src / PM_ENTRY_BYTES; - unsigned long start_vaddr = svpfn << PAGE_SHIFT; - unsigned long end_vaddr = TASK_SIZE_OF(task); - - /* watch out for wraparound */ - if (svpfn > TASK_SIZE_OF(task) >> PAGE_SHIFT) - start_vaddr = end_vaddr; - - /* - * The odds are that this will stop walking way - * before end_vaddr, because the length of the - * user buffer is tracked in "pm", and the walk - * will stop when we hit the end of the buffer. - */ - ret = walk_page_range(start_vaddr, end_vaddr, - &pagemap_walk); - if (ret == PM_END_OF_BUFFER) - ret = 0; - /* don't need mmap_sem for these, but this looks cleaner */ - *ppos += (char *)pm.out - buf; - if (!ret) - ret = (char *)pm.out - buf; - } + pagemap_walk.pmd_entry = pagemap_pte_range; + pagemap_walk.pte_hole = pagemap_pte_hole; + pagemap_walk.mm = mm; + pagemap_walk.private = ± + + src = *ppos; + svpfn = src / PM_ENTRY_BYTES; + start_vaddr = svpfn << PAGE_SHIFT; + end_vaddr = TASK_SIZE_OF(task); + + /* watch out for wraparound */ + if (svpfn > TASK_SIZE_OF(task) >> PAGE_SHIFT) + start_vaddr = end_vaddr; + + /* + * The odds are that this will stop walking way + * before end_vaddr, because the length of the + * user buffer is tracked in "pm", and the walk + * will stop when we hit the end of the buffer. + */ + ret = walk_page_range(start_vaddr, end_vaddr, &pagemap_walk); + if (ret == PM_END_OF_BUFFER) + ret = 0; + /* don't need mmap_sem for these, but this looks cleaner */ + *ppos += (char *)pm.out - buf; + if (!ret) + ret = (char *)pm.out - buf; out_pages: for (; pagecount; pagecount--) { -- cgit v1.2.3 From b7279469d66b55119784b8b9529c99c1955fe747 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 5 Jul 2008 15:53:22 -0700 Subject: Linux 2.6.26-rc9 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 6aff5f47c21d..6315424a00b9 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -EXTRAVERSION = -rc8 +EXTRAVERSION = -rc9 NAME = Rotary Wombat # *DOCUMENTATION* -- cgit v1.2.3 From 7f2d38eb7a42bea1c1df51bbdaa2ca0f0bdda07f Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Sat, 5 Jul 2008 23:38:43 -0700 Subject: can: add sanity checks Even though the CAN netlayer only deals with CAN netdevices, the netlayer interface to the userspace and to the device layer should perform some sanity checks. This patch adds several sanity checks that mainly prevent userspace apps to send broken content into the system that may be misinterpreted by some other userspace application. Signed-off-by: Oliver Hartkopp Signed-off-by: Urs Thuermann Acked-by: Andre Naujoks Signed-off-by: David S. Miller --- net/can/af_can.c | 10 ++++++++++ net/can/bcm.c | 23 +++++++++++++++++++---- net/can/raw.c | 3 +++ 3 files changed, 32 insertions(+), 4 deletions(-) diff --git a/net/can/af_can.c b/net/can/af_can.c index 7e8ca2836452..484bbf6dd032 100644 --- a/net/can/af_can.c +++ b/net/can/af_can.c @@ -205,12 +205,19 @@ static int can_create(struct net *net, struct socket *sock, int protocol) * -ENOBUFS on full driver queue (see net_xmit_errno()) * -ENOMEM when local loopback failed at calling skb_clone() * -EPERM when trying to send on a non-CAN interface + * -EINVAL when the skb->data does not contain a valid CAN frame */ int can_send(struct sk_buff *skb, int loop) { struct sk_buff *newskb = NULL; + struct can_frame *cf = (struct can_frame *)skb->data; int err; + if (skb->len != sizeof(struct can_frame) || cf->can_dlc > 8) { + kfree_skb(skb); + return -EINVAL; + } + if (skb->dev->type != ARPHRD_CAN) { kfree_skb(skb); return -EPERM; @@ -605,6 +612,7 @@ static int can_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev) { struct dev_rcv_lists *d; + struct can_frame *cf = (struct can_frame *)skb->data; int matches; if (dev->type != ARPHRD_CAN || dev_net(dev) != &init_net) { @@ -612,6 +620,8 @@ static int can_rcv(struct sk_buff *skb, struct net_device *dev, return 0; } + BUG_ON(skb->len != sizeof(struct can_frame) || cf->can_dlc > 8); + /* update statistics */ can_stats.rx_frames++; can_stats.rx_frames_delta++; diff --git a/net/can/bcm.c b/net/can/bcm.c index d9a3a9d13bed..72c2ce904f83 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -298,7 +298,7 @@ static void bcm_send_to_user(struct bcm_op *op, struct bcm_msg_head *head, if (head->nframes) { /* can_frames starting here */ - firstframe = (struct can_frame *) skb_tail_pointer(skb); + firstframe = (struct can_frame *)skb_tail_pointer(skb); memcpy(skb_put(skb, datalen), frames, datalen); @@ -826,6 +826,10 @@ static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, for (i = 0; i < msg_head->nframes; i++) { err = memcpy_fromiovec((u8 *)&op->frames[i], msg->msg_iov, CFSIZ); + + if (op->frames[i].can_dlc > 8) + err = -EINVAL; + if (err < 0) return err; @@ -858,6 +862,10 @@ static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, for (i = 0; i < msg_head->nframes; i++) { err = memcpy_fromiovec((u8 *)&op->frames[i], msg->msg_iov, CFSIZ); + + if (op->frames[i].can_dlc > 8) + err = -EINVAL; + if (err < 0) { if (op->frames != &op->sframe) kfree(op->frames); @@ -1164,9 +1172,12 @@ static int bcm_tx_send(struct msghdr *msg, int ifindex, struct sock *sk) skb->dev = dev; skb->sk = sk; - can_send(skb, 1); /* send with loopback */ + err = can_send(skb, 1); /* send with loopback */ dev_put(dev); + if (err) + return err; + return CFSIZ + MHSIZ; } @@ -1185,6 +1196,10 @@ static int bcm_sendmsg(struct kiocb *iocb, struct socket *sock, if (!bo->bound) return -ENOTCONN; + /* check for valid message length from userspace */ + if (size < MHSIZ || (size - MHSIZ) % CFSIZ) + return -EINVAL; + /* check for alternative ifindex for this bcm_op */ if (!ifindex && msg->msg_name) { @@ -1259,8 +1274,8 @@ static int bcm_sendmsg(struct kiocb *iocb, struct socket *sock, break; case TX_SEND: - /* we need at least one can_frame */ - if (msg_head.nframes < 1) + /* we need exactly one can_frame behind the msg head */ + if ((msg_head.nframes != 1) || (size != CFSIZ + MHSIZ)) ret = -EINVAL; else ret = bcm_tx_send(msg, ifindex, sk); diff --git a/net/can/raw.c b/net/can/raw.c index 69877b8e7e9c..3e46ee36a1aa 100644 --- a/net/can/raw.c +++ b/net/can/raw.c @@ -632,6 +632,9 @@ static int raw_sendmsg(struct kiocb *iocb, struct socket *sock, } else ifindex = ro->ifindex; + if (size != sizeof(struct can_frame)) + return -EINVAL; + dev = dev_get_by_index(&init_net, ifindex); if (!dev) return -ENXIO; -- cgit v1.2.3 From ca3739327b89bb4053a62ac41b67b106c1967ab0 Mon Sep 17 00:00:00 2001 From: Anthony Liguori Date: Thu, 3 Jul 2008 19:02:36 +0300 Subject: x86: KVM guest: Add memory clobber to hypercalls Hypercalls can modify arbitrary regions of memory. Make sure to indicate this in the clobber list. This fixes a hang when using KVM_GUEST kernel built with GCC 4.3.0. This was originally spotted and analyzed by Marcelo. Signed-off-by: Anthony Liguori Signed-off-by: Avi Kivity --- include/asm-x86/kvm_para.h | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/include/asm-x86/kvm_para.h b/include/asm-x86/kvm_para.h index bfd9900742bf..76f392146daa 100644 --- a/include/asm-x86/kvm_para.h +++ b/include/asm-x86/kvm_para.h @@ -71,7 +71,8 @@ static inline long kvm_hypercall0(unsigned int nr) long ret; asm volatile(KVM_HYPERCALL : "=a"(ret) - : "a"(nr)); + : "a"(nr) + : "memory"); return ret; } @@ -80,7 +81,8 @@ static inline long kvm_hypercall1(unsigned int nr, unsigned long p1) long ret; asm volatile(KVM_HYPERCALL : "=a"(ret) - : "a"(nr), "b"(p1)); + : "a"(nr), "b"(p1) + : "memory"); return ret; } @@ -90,7 +92,8 @@ static inline long kvm_hypercall2(unsigned int nr, unsigned long p1, long ret; asm volatile(KVM_HYPERCALL : "=a"(ret) - : "a"(nr), "b"(p1), "c"(p2)); + : "a"(nr), "b"(p1), "c"(p2) + : "memory"); return ret; } @@ -100,7 +103,8 @@ static inline long kvm_hypercall3(unsigned int nr, unsigned long p1, long ret; asm volatile(KVM_HYPERCALL : "=a"(ret) - : "a"(nr), "b"(p1), "c"(p2), "d"(p3)); + : "a"(nr), "b"(p1), "c"(p2), "d"(p3) + : "memory"); return ret; } @@ -111,7 +115,8 @@ static inline long kvm_hypercall4(unsigned int nr, unsigned long p1, long ret; asm volatile(KVM_HYPERCALL : "=a"(ret) - : "a"(nr), "b"(p1), "c"(p2), "d"(p3), "S"(p4)); + : "a"(nr), "b"(p1), "c"(p2), "d"(p3), "S"(p4) + : "memory"); return ret; } -- cgit v1.2.3 From 35baff256d8fe1eec0b8988fcb5cde80df7bfa1a Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Fri, 4 Jul 2008 18:23:15 +0100 Subject: KVM: IOAPIC: Fix level-triggered irq injection hang The "remote_irr" variable is used to indicate an interrupt which has been received by the LAPIC, but not acked. In our EOI handler, we unset remote_irr and re-inject the interrupt if the interrupt line is still asserted. However, we do not set remote_irr here, leading to a situation where if kvm_ioapic_set_irq() is called, then we go ahead and call ioapic_service(). This means that IRR is re-asserted even though the interrupt is currently in service (i.e. LAPIC IRR is cleared and ISR/TMR set) The issue with this is that when the currently executing interrupt handler finishes and writes LAPIC EOI, then TMR is unset and EOI sent to the IOAPIC. Since IRR is now asserted, but TMR is not, then when the second interrupt is handled, no EOI is sent and if there is any pending interrupt, it is not re-injected. This fixes a hang only seen while running mke2fs -j on an 8Gb virtio disk backed by a fully sparse raw file, with aliguori "avoid fragmented virtio-blk transfers by copying" changes. Signed-off-by: Mark McLoughlin Acked-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- virt/kvm/ioapic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c index 1dcf9f3d1107..44589088941f 100644 --- a/virt/kvm/ioapic.c +++ b/virt/kvm/ioapic.c @@ -278,7 +278,7 @@ static void __kvm_ioapic_update_eoi(struct kvm_ioapic *ioapic, int gsi) ent->fields.remote_irr = 0; if (!ent->fields.mask && (ioapic->irr & (1 << gsi))) - ioapic_deliver(ioapic, gsi); + ioapic_service(ioapic, gsi); } void kvm_ioapic_update_eoi(struct kvm *kvm, int vector) -- cgit v1.2.3 From 5e374fb62621aca9522f76c2317c9acda75a8e88 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 1 Jul 2008 13:12:04 +0200 Subject: generic-ipi: fixlet create proper stackframe. Signed-off-by: Ingo Molnar --- arch/x86/kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c index 56546e8a13ac..361b7a4c640c 100644 --- a/arch/x86/kernel/smp.c +++ b/arch/x86/kernel/smp.c @@ -198,7 +198,7 @@ void smp_call_function_interrupt(struct pt_regs *regs) irq_exit(); } -void smp_call_function_single_interrupt(void) +void smp_call_function_single_interrupt(struct pt_regs *regs) { ack_APIC_irq(); irq_enter(); -- cgit v1.2.3 From bdb2b8cab4392ce41ddfbd6773a3da3334daf836 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Jun 2008 14:03:14 -0400 Subject: [SCSI] erase invalid data returned by device This patch (as1108) fixes a problem that can occur with certain USB mass-storage devices: They return invalid data together with a residue indicating that the data should be ignored. Rather than leave the invalid data in a transfer buffer, where it can get misinterpreted, the patch clears the invalid portion of the buffer. This solves a problem (wrong write-protect setting detected) reported by Maciej Rutecki and Peter Teoh. Signed-off-by: Alan Stern Tested-by: Peter Teoh Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index a82d2fe80fb5..cbf55d59a54c 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -207,6 +207,15 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, */ blk_execute_rq(req->q, NULL, req, 1); + /* + * Some devices (USB mass-storage in particular) may transfer + * garbage data together with a residue indicating that the data + * is invalid. Prevent the garbage from being misinterpreted + * and prevent security leaks by zeroing out the excess data. + */ + if (unlikely(req->data_len > 0 && req->data_len <= bufflen)) + memset(buffer + (bufflen - req->data_len), 0, req->data_len); + ret = req->errors; out: blk_put_request(req); -- cgit v1.2.3 From 09ca8adbe9f724a7e96f512c0039c4c4a1c5dcc0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 6 Jul 2008 10:27:25 -0700 Subject: Revert "USB: don't explicitly reenable root-hub status interrupts" This reverts commit e872154921a6b5256a3c412dd69158ac0b135176. Andrey Borzenkov reports that it resulted in a totally hung machine for him when loading the OHCI driver. Extensive netconsole capture with SysRq output shows that modprobe gets stuck in ohci_hub_status_data() when probing and enabling the OHCI controller, see for example http://lkml.org/lkml/2008/7/5/236 for an analysis. The problem appears to be an interrupt flood triggered by the commit that gets reverted, and Andrey confirmed that the revert makes things work for him again. Reported-and-tested-by: Andrey Borzenkov Acked-by: Alan Stern Acked-by: David Brownell Cc: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/usb/core/hcd.c | 9 +++++++ drivers/usb/core/hcd.h | 2 ++ drivers/usb/core/hub.c | 9 +++++++ drivers/usb/host/ohci-at91.c | 1 + drivers/usb/host/ohci-au1xxx.c | 1 + drivers/usb/host/ohci-ep93xx.c | 1 + drivers/usb/host/ohci-hub.c | 53 +++++++++++++++++------------------------ drivers/usb/host/ohci-lh7a404.c | 1 + drivers/usb/host/ohci-omap.c | 1 + drivers/usb/host/ohci-pci.c | 1 + drivers/usb/host/ohci-pnx4008.c | 1 + drivers/usb/host/ohci-pnx8550.c | 1 + drivers/usb/host/ohci-ppc-of.c | 1 + drivers/usb/host/ohci-ppc-soc.c | 1 + drivers/usb/host/ohci-ps3.c | 1 + drivers/usb/host/ohci-pxa27x.c | 1 + drivers/usb/host/ohci-s3c2410.c | 1 + drivers/usb/host/ohci-sa1111.c | 1 + drivers/usb/host/ohci-sh.c | 1 + drivers/usb/host/ohci-sm501.c | 1 + drivers/usb/host/ohci-ssb.c | 1 + drivers/usb/host/u132-hcd.c | 11 +++++++++ 22 files changed, 70 insertions(+), 31 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 7158dbb6e4b4..42a436478b78 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -924,6 +924,15 @@ static int register_root_hub(struct usb_hcd *hcd) return retval; } +void usb_enable_root_hub_irq (struct usb_bus *bus) +{ + struct usb_hcd *hcd; + + hcd = container_of (bus, struct usb_hcd, self); + if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT) + hcd->driver->hub_irq_enable (hcd); +} + /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index a0bf5df6cb6f..b9de1569b39e 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -210,6 +210,8 @@ struct hc_driver { int (*bus_suspend)(struct usb_hcd *); int (*bus_resume)(struct usb_hcd *); int (*start_port_reset)(struct usb_hcd *, unsigned port_num); + void (*hub_irq_enable)(struct usb_hcd *); + /* Needed only if port-change IRQs are level-triggered */ /* force handover of high-speed port to full-speed companion */ void (*relinquish_port)(struct usb_hcd *, int); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 512d2d57d41e..4cfe32a16c37 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2073,6 +2073,8 @@ int usb_port_resume(struct usb_device *udev) } clear_bit(port1, hub->busy_bits); + if (!hub->hdev->parent && !hub->busy_bits[0]) + usb_enable_root_hub_irq(hub->hdev->bus); if (status == 0) status = finish_port_resume(udev); @@ -3002,6 +3004,11 @@ static void hub_events(void) hub->activating = 0; + /* If this is a root hub, tell the HCD it's okay to + * re-enable port-change interrupts now. */ + if (!hdev->parent && !hub->busy_bits[0]) + usb_enable_root_hub_irq(hdev->bus); + loop_autopm: /* Allow autosuspend if we're not going to run again */ if (list_empty(&hub->event_list)) @@ -3227,6 +3234,8 @@ int usb_reset_device(struct usb_device *udev) break; } clear_bit(port1, parent_hub->busy_bits); + if (!parent_hdev->parent && !parent_hub->busy_bits[0]) + usb_enable_root_hub_irq(parent_hdev->bus); if (ret < 0) goto re_enumerate; diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index c96db1153dcf..e534f9de0f05 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -261,6 +261,7 @@ static const struct hc_driver ohci_at91_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index 1b9abdba920b..f90fe0c7373f 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -288,6 +288,7 @@ static const struct hc_driver ohci_au1xxx_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index 06aadfb0ec29..5adaf36e47d0 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -135,6 +135,7 @@ static struct hc_driver ohci_ep93xx_hc_driver = { .get_frame_number = ohci_get_frame, .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 79a78029f896..b56739221d11 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -36,6 +36,18 @@ /*-------------------------------------------------------------------------*/ +/* hcd->hub_irq_enable() */ +static void ohci_rhsc_enable (struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + + spin_lock_irq(&ohci->lock); + if (!ohci->autostop) + del_timer(&hcd->rh_timer); /* Prevent next poll */ + ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable); + spin_unlock_irq(&ohci->lock); +} + #define OHCI_SCHED_ENABLES \ (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE) @@ -362,28 +374,18 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, int any_connected) { int poll_rh = 1; - int rhsc; - rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC; switch (ohci->hc_control & OHCI_CTRL_HCFS) { case OHCI_USB_OPER: - /* If no status changes are pending, enable status-change - * interrupts. - */ - if (!rhsc && !changed) { - rhsc = OHCI_INTR_RHSC; - ohci_writel(ohci, rhsc, &ohci->regs->intrenable); - } - - /* Keep on polling until we know a device is connected - * and RHSC is enabled, or until we autostop. - */ + /* keep on polling until we know a device is connected + * and RHSC is enabled */ if (!ohci->autostop) { if (any_connected || !device_may_wakeup(&ohci_to_hcd(ohci) ->self.root_hub->dev)) { - if (rhsc) + if (ohci_readl(ohci, &ohci->regs->intrenable) & + OHCI_INTR_RHSC) poll_rh = 0; } else { ohci->autostop = 1; @@ -396,13 +398,12 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, ohci->autostop = 0; ohci->next_statechange = jiffies + STATECHANGE_DELAY; - } else if (rhsc && time_after_eq(jiffies, + } else if (time_after_eq(jiffies, ohci->next_statechange) && !ohci->ed_rm_list && !(ohci->hc_control & OHCI_SCHED_ENABLES)) { ohci_rh_suspend(ohci, 1); - poll_rh = 0; } } break; @@ -416,12 +417,6 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, else usb_hcd_resume_root_hub(ohci_to_hcd(ohci)); } else { - if (!rhsc && (ohci->autostop || - ohci_to_hcd(ohci)->self.root_hub-> - do_remote_wakeup)) - ohci_writel(ohci, OHCI_INTR_RHSC, - &ohci->regs->intrenable); - /* everything is idle, no need for polling */ poll_rh = 0; } @@ -443,16 +438,12 @@ static inline int ohci_rh_resume(struct ohci_hcd *ohci) static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, int any_connected) { - /* If RHSC is enabled, don't poll */ - if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC) - return 0; + int poll_rh = 1; - /* If no status changes are pending, enable status-change interrupts */ - if (!changed) { - ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable); - return 0; - } - return 1; + /* keep on polling until RHSC is enabled */ + if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC) + poll_rh = 0; + return poll_rh; } #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index 96d14fa1d833..13c12ed22252 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -193,6 +193,7 @@ static const struct hc_driver ohci_lh7a404_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 6859fb5f1d6f..3a7c24c03671 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -466,6 +466,7 @@ static const struct hc_driver ohci_omap_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 3bf175d95a23..4696cc912e16 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -327,6 +327,7 @@ static const struct hc_driver ohci_pci_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c index 664f07ee8732..28b458f20cc3 100644 --- a/drivers/usb/host/ohci-pnx4008.c +++ b/drivers/usb/host/ohci-pnx4008.c @@ -280,6 +280,7 @@ static const struct hc_driver ohci_pnx4008_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c index 28467e288a93..605d59cba28e 100644 --- a/drivers/usb/host/ohci-pnx8550.c +++ b/drivers/usb/host/ohci-pnx8550.c @@ -201,6 +201,7 @@ static const struct hc_driver ohci_pnx8550_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 50e55db13636..a67252791223 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -72,6 +72,7 @@ static const struct hc_driver ohci_ppc_of_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index cd3398b675b2..523c30125577 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -172,6 +172,7 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index bfdeb0d22d05..c1935ae537f8 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -68,6 +68,7 @@ static const struct hc_driver ps3_ohci_hc_driver = { .get_frame_number = ohci_get_frame, .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, .start_port_reset = ohci_start_port_reset, #if defined(CONFIG_PM) .bus_suspend = ohci_bus_suspend, diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 70b0d4b459e7..d4ee27d92be8 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -298,6 +298,7 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index a73d2ff322e2..ead4772f0f27 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -466,6 +466,7 @@ static const struct hc_driver ohci_s3c2410_hc_driver = { */ .hub_status_data = ohci_s3c2410_hub_status_data, .hub_control = ohci_s3c2410_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 99438c65981b..0f48f2d99226 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -231,6 +231,7 @@ static const struct hc_driver ohci_sa1111_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c index 60f03cc7ec4f..e7ee607278fe 100644 --- a/drivers/usb/host/ohci-sh.c +++ b/drivers/usb/host/ohci-sh.c @@ -68,6 +68,7 @@ static const struct hc_driver ohci_sh_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index e899a77dfb83..e610698c6b60 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -75,6 +75,7 @@ static const struct hc_driver ohci_sm501_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c index c4265caec780..7275186db315 100644 --- a/drivers/usb/host/ohci-ssb.c +++ b/drivers/usb/host/ohci-ssb.c @@ -81,6 +81,7 @@ static const struct hc_driver ssb_ohci_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, + .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index f29307405bb3..9b6323f768b2 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -2934,6 +2934,16 @@ static int u132_start_port_reset(struct usb_hcd *hcd, unsigned port_num) return 0; } +static void u132_hub_irq_enable(struct usb_hcd *hcd) +{ + struct u132 *u132 = hcd_to_u132(hcd); + if (u132->going > 1) { + dev_err(&u132->platform_dev->dev, "device has been removed %d\n" + , u132->going); + } else if (u132->going > 0) + dev_err(&u132->platform_dev->dev, "device is being removed\n"); +} + #ifdef CONFIG_PM static int u132_bus_suspend(struct usb_hcd *hcd) @@ -2985,6 +2995,7 @@ static struct hc_driver u132_hc_driver = { .bus_suspend = u132_bus_suspend, .bus_resume = u132_bus_resume, .start_port_reset = u132_start_port_reset, + .hub_irq_enable = u132_hub_irq_enable, }; /* -- cgit v1.2.3 From 97f8571e663c808ad2d01a396627235167291556 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 6 Jul 2008 01:15:34 +0200 Subject: pxamci: fix byte aligned DMA transfers The pxa27x DMA controller defaults to 64-bit alignment. This caused the SCR reads to fail (and, depending on card type, error out) when card->raw_scr was not aligned on a 8-byte boundary. For performance reasons all scatter-gather addresses passed to pxamci_request should be aligned on 8-byte boundaries, but if this can't be guaranteed, byte aligned DMA transfers in the have to be enabled in the controller to get correct behaviour. Signed-off-by: Philipp Zabel Signed-off-by: Pierre Ossman Signed-off-by: Linus Torvalds --- drivers/mmc/host/pxamci.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 65210fca37ed..d89475d36988 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -114,6 +114,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) unsigned int nob = data->blocks; unsigned long long clks; unsigned int timeout; + bool dalgn = 0; u32 dcmd; int i; @@ -152,6 +153,9 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) host->sg_cpu[i].dcmd = dcmd | length; if (length & 31 && !(data->flags & MMC_DATA_READ)) host->sg_cpu[i].dcmd |= DCMD_ENDIRQEN; + /* Not aligned to 8-byte boundary? */ + if (sg_dma_address(&data->sg[i]) & 0x7) + dalgn = 1; if (data->flags & MMC_DATA_READ) { host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO; host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]); @@ -165,6 +169,15 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP; wmb(); + /* + * The PXA27x DMA controller encounters overhead when working with + * unaligned (to 8-byte boundaries) data, so switch on byte alignment + * mode only if we have unaligned data. + */ + if (dalgn) + DALGN |= (1 << host->dma); + else + DALGN &= (1 << host->dma); DDADR(host->dma) = host->sg_dma; DCSR(host->dma) = DCSR_RUN; } -- cgit v1.2.3 From 0f9bfa569d46f2346a53a940b2b9e49a38635732 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 6 Jul 2008 16:06:25 -0700 Subject: vsprintf: split out '%s' handling logic The actual code is the same, just split out into a helper function. This makes it easier to read, and allows for future sharing of the string code. Signed-off-by: Linus Torvalds --- lib/vsprintf.c | 57 +++++++++++++++++++++++++++++++-------------------------- 1 file changed, 31 insertions(+), 26 deletions(-) diff --git a/lib/vsprintf.c b/lib/vsprintf.c index 6021757a4496..926c7e00e2dc 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -482,6 +482,35 @@ static char *number(char *buf, char *end, unsigned long long num, int base, int return buf; } +static char *string(char *buf, char *end, char *s, int field_width, int precision, int flags) +{ + int len, i; + + if ((unsigned long)s < PAGE_SIZE) + s = ""; + + len = strnlen(s, precision); + + if (!(flags & LEFT)) { + while (len < field_width--) { + if (buf < end) + *buf = ' '; + ++buf; + } + } + for (i = 0; i < len; ++i) { + if (buf < end) + *buf = *s; + ++buf; ++s; + } + while (len < field_width--) { + if (buf < end) + *buf = ' '; + ++buf; + } + return buf; +} + /** * vsnprintf - Format a string and place it in a buffer * @buf: The buffer to place the result into @@ -502,11 +531,9 @@ static char *number(char *buf, char *end, unsigned long long num, int base, int */ int vsnprintf(char *buf, size_t size, const char *fmt, va_list args) { - int len; unsigned long long num; - int i, base; + int base; char *str, *end, c; - const char *s; int flags; /* flags to number() */ @@ -622,29 +649,7 @@ int vsnprintf(char *buf, size_t size, const char *fmt, va_list args) continue; case 's': - s = va_arg(args, char *); - if ((unsigned long)s < PAGE_SIZE) - s = ""; - - len = strnlen(s, precision); - - if (!(flags & LEFT)) { - while (len < field_width--) { - if (str < end) - *str = ' '; - ++str; - } - } - for (i = 0; i < len; ++i) { - if (str < end) - *str = *s; - ++str; ++s; - } - while (len < field_width--) { - if (str < end) - *str = ' '; - ++str; - } + str = string(str, end, va_arg(args, char *), field_width, precision, flags); continue; case 'p': -- cgit v1.2.3 From 78a8bf69b32980879975f7e31d30386c50bfe851 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 6 Jul 2008 16:16:15 -0700 Subject: vsprintf: split out '%p' handling logic The actual code is the same, just split out into a helper function. This makes it easier to read, and allows for simple future extension of %p handling. Signed-off-by: Linus Torvalds --- lib/vsprintf.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/lib/vsprintf.c b/lib/vsprintf.c index 926c7e00e2dc..f569feb7662e 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -511,6 +511,16 @@ static char *string(char *buf, char *end, char *s, int field_width, int precisio return buf; } +static char *pointer(char *buf, char *end, void *ptr, int field_width, int precision, int flags) +{ + flags |= SMALL; + if (field_width == -1) { + field_width = 2*sizeof(void *); + flags |= ZEROPAD; + } + return number(buf, end, (unsigned long) ptr, 16, field_width, precision, flags); +} + /** * vsnprintf - Format a string and place it in a buffer * @buf: The buffer to place the result into @@ -653,17 +663,9 @@ int vsnprintf(char *buf, size_t size, const char *fmt, va_list args) continue; case 'p': - flags |= SMALL; - if (field_width == -1) { - field_width = 2*sizeof(void *); - flags |= ZEROPAD; - } - str = number(str, end, - (unsigned long) va_arg(args, void *), - 16, field_width, precision, flags); + str = pointer(str, end, va_arg(args, void *), field_width, precision, flags); continue; - case 'n': /* FIXME: * What does C99 say about the overflow case here? */ -- cgit v1.2.3 From 4d8a743cdd2690c0bc8d1b8cbd02cffb1ead849f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 6 Jul 2008 16:24:57 -0700 Subject: vsprintf: add infrastructure support for extended '%p' specifiers This expands the kernel '%p' handling with an arbitrary alphanumberic specifier extension string immediately following the '%p'. Right now it's just being ignored, but the next commit will start adding some specific pointer type extensions. NOTE! The reason the extension is appended to the '%p' is to allow minimal gcc type checking: gcc will still see the '%p' and will check that the argument passed in is indeed a pointer, and yet will not complain about the extended information that gcc doesn't understand about (on the other hand, it also won't actually check that the pointer type and the extension are compatible). Alphanumeric characters were chosen because there is no sane existing use for a string format with a hex pointer representation immediately followed by alphanumerics (which is what such a format string would have traditionally resulted in). Signed-off-by: Linus Torvalds --- lib/vsprintf.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/lib/vsprintf.c b/lib/vsprintf.c index f569feb7662e..5d6f0718b6d9 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -511,7 +511,14 @@ static char *string(char *buf, char *end, char *s, int field_width, int precisio return buf; } -static char *pointer(char *buf, char *end, void *ptr, int field_width, int precision, int flags) +/* + * Show a '%p' thing. A kernel extension is that the '%p' is followed + * by an extra set of alphanumeric characters that are extended format + * specifiers. + * + * Right now don't actually handle any such, but we will.. + */ +static char *pointer(const char *fmt, char *buf, char *end, void *ptr, int field_width, int precision, int flags) { flags |= SMALL; if (field_width == -1) { @@ -663,7 +670,12 @@ int vsnprintf(char *buf, size_t size, const char *fmt, va_list args) continue; case 'p': - str = pointer(str, end, va_arg(args, void *), field_width, precision, flags); + str = pointer(fmt+1, str, end, + va_arg(args, void *), + field_width, precision, flags); + /* Skip all alphanumeric pointer suffixes */ + while (isalnum(fmt[1])) + fmt++; continue; case 'n': -- cgit v1.2.3 From 0fe1ef24f7bd0020f29ffe287dfdb9ead33ca0b2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 6 Jul 2008 16:43:12 -0700 Subject: vsprintf: add support for '%pS' and '%pF' pointer formats They print out a pointer in symbolic format, if possible (ie using symbolic KALLSYMS information). The '%pS' format is for regular direct pointers (which can point to data or code and that you find on the stack during backtraces etc), while '%pF' is for C function pointer types. On most architectures, the two mean exactly the same thing, but some architectures use an indirect pointer for C function pointers, where the function pointer points to a function descriptor (which in turn contains the actual pointer to the code). The '%pF' code automatically does the appropriate function descriptor dereference on such architectures. Signed-off-by: Linus Torvalds --- lib/vsprintf.c | 41 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-) diff --git a/lib/vsprintf.c b/lib/vsprintf.c index 5d6f0718b6d9..1dc2d1d18fa8 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -22,6 +22,8 @@ #include #include #include +#include +#include #include /* for PAGE_SIZE */ #include @@ -511,15 +513,52 @@ static char *string(char *buf, char *end, char *s, int field_width, int precisio return buf; } +static inline void *dereference_function_descriptor(void *ptr) +{ +#if defined(CONFIG_IA64) || defined(CONFIG_PPC64) + void *p; + if (!probe_kernel_address(ptr, p)) + ptr = p; +#endif + return ptr; +} + +static char *symbol_string(char *buf, char *end, void *ptr, int field_width, int precision, int flags) +{ + unsigned long value = (unsigned long) ptr; +#ifdef CONFIG_KALLSYMS + char sym[KSYM_SYMBOL_LEN]; + sprint_symbol(sym, value); + return string(buf, end, sym, field_width, precision, flags); +#else + field_width = 2*sizeof(void *); + flags |= SPECIAL | SMALL | ZEROPAD; + return number(buf, end, value, 16, field_width, precision, flags); +#endif +} + /* * Show a '%p' thing. A kernel extension is that the '%p' is followed * by an extra set of alphanumeric characters that are extended format * specifiers. * - * Right now don't actually handle any such, but we will.. + * Right now we just handle 'F' (for symbolic Function descriptor pointers) + * and 'S' (for Symbolic direct pointers), but this can easily be + * extended in the future (network address types etc). + * + * The difference between 'S' and 'F' is that on ia64 and ppc64 function + * pointers are really function descriptors, which contain a pointer the + * real address. */ static char *pointer(const char *fmt, char *buf, char *end, void *ptr, int field_width, int precision, int flags) { + switch (*fmt) { + case 'F': + ptr = dereference_function_descriptor(ptr); + /* Fallthrough */ + case 'S': + return symbol_string(buf, end, ptr, field_width, precision, flags); + } flags |= SMALL; if (field_width == -1) { field_width = 2*sizeof(void *); -- cgit v1.2.3 From 8b7fd21511f9b5016665814e03f7fc948bb64a98 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 7 Jul 2008 16:40:26 +0900 Subject: x86: clean up amd_iommu documentation amd_iommu=off was replaced with a common parameter, iommu=off. Signed-off-by: FUJITA Tomonori Cc: joerg.roedel@amd.com Cc: iommu@lists.linux-foundation.org Cc: bhavna.sarathy@amd.com Cc: robert.richter@amd.com Cc: rjw@sisk.pl Signed-off-by: Ingo Molnar --- Documentation/kernel-parameters.txt | 1 - 1 file changed, 1 deletion(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index fc8f93606ec1..6b757b468bf1 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -274,7 +274,6 @@ and is between 256 and 4096 characters. It is defined in the file amd_iommu= [HW,X86-84] Pass parameters to the AMD IOMMU driver in the system. Possible values are: - off - disable the driver for AMD IOMMU isolate - enable device isolation (each device, as far as possible, will get its own protection domain) -- cgit v1.2.3 From 265d529cef6fd57698d79b3c0edd3a8178059ea6 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 7 Jul 2008 10:02:36 +0100 Subject: [GFS2] Fix delayed demote race There is a race in the delayed demote code where it does the wrong thing if a demotion to UN has occurred for other reasons before the delay has expired. This patch adds an assert to catch that condition as well as fixing the root cause by adding an additional check for the UN state. Signed-off-by: Steven Whitehouse Cc: Bob Peterson --- fs/gfs2/glock.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index 8d5450f3c3ef..cd0aa213fb2f 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -587,6 +587,7 @@ static void run_queue(struct gfs2_glock *gl, const int nonblock) if (nonblock) goto out_sched; set_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags); + GLOCK_BUG_ON(gl, gl->gl_demote_state == LM_ST_EXCLUSIVE); gl->gl_target = gl->gl_demote_state; } else { if (test_bit(GLF_DEMOTE, &gl->gl_flags)) @@ -617,7 +618,9 @@ static void glock_work_func(struct work_struct *work) if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) finish_xmote(gl, gl->gl_reply); spin_lock(&gl->gl_spin); - if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags)) { + if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && + gl->gl_state != LM_ST_UNLOCKED && + gl->gl_demote_state != LM_ST_EXCLUSIVE) { unsigned long holdtime, now = jiffies; holdtime = gl->gl_tchange + gl->gl_ops->go_min_hold_time; if (time_before(now, holdtime)) -- cgit v1.2.3 From 209806aba9d540dde3db0a5ce72307f85f33468f Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 7 Jul 2008 10:07:28 +0100 Subject: [GFS2] Allow local DF locks when holding a cached EX glock We already allow local SH locks while we hold a cached EX glock, so here we allow DF locks as well. This works only because we rely on the VFS's invalidation for locally cached data, and because if we hold an EX lock, then we know that no other node can be caching data relating to this file. It dramatically speeds up initial writes to O_DIRECT files since we fall back to buffered I/O for this and would otherwise bounce between DF and EX modes on each and every write call. The lessons to be learned from that are to ensure that (for the time being anyway) O_DIRECT files are preallocated and that they are written to using reasonably large I/O sizes. Even so this change fixes that corner case nicely Signed-off-by: Steven Whitehouse --- fs/gfs2/glock.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index cd0aa213fb2f..13391e546616 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -267,8 +267,12 @@ static inline int may_grant(const struct gfs2_glock *gl, const struct gfs2_holde return 1; if (gh->gh_flags & GL_EXACT) return 0; - if (gh->gh_state == LM_ST_SHARED && gl->gl_state == LM_ST_EXCLUSIVE) - return 1; + if (gl->gl_state == LM_ST_EXCLUSIVE) { + if (gh->gh_state == LM_ST_SHARED && gh_head->gh_state == LM_ST_SHARED) + return 1; + if (gh->gh_state == LM_ST_DEFERRED && gh_head->gh_state == LM_ST_DEFERRED) + return 1; + } if (gl->gl_state != LM_ST_UNLOCKED && (gh->gh_flags & LM_FLAG_ANY)) return 1; return 0; -- cgit v1.2.3 From 5a2cc50f166babc26103279c4fbc9f2bf73b79de Mon Sep 17 00:00:00 2001 From: eric miao Date: Mon, 26 May 2008 03:28:09 +0100 Subject: [ARM] 5063/1: pxa: add clk support for pxa2xx I2S Signed-off-by: Eric Miao Acked-by: Mark Brown Signed-off-by: Russell King --- sound/soc/pxa/pxa2xx-i2s.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c index 425071030970..e130346732ba 100644 --- a/sound/soc/pxa/pxa2xx-i2s.c +++ b/sound/soc/pxa/pxa2xx-i2s.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -40,6 +41,7 @@ struct pxa_i2s_port { u32 fmt; }; static struct pxa_i2s_port pxa_i2s; +static struct clk *clk_i2s; static struct pxa2xx_pcm_dma_params pxa2xx_i2s_pcm_stereo_out = { .name = "I2S PCM Stereo out", @@ -82,6 +84,10 @@ static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; + clk_i2s = clk_get(NULL, "I2SCLK"); + if (IS_ERR(clk_i2s)) + return PTR_ERR(clk_i2s); + if (!cpu_dai->active) { SACR0 |= SACR0_RST; SACR0 = 0; @@ -149,7 +155,7 @@ static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream, pxa_gpio_mode(gpio_bus[pxa_i2s.master].tx); pxa_gpio_mode(gpio_bus[pxa_i2s.master].frm); pxa_gpio_mode(gpio_bus[pxa_i2s.master].clk); - pxa_set_cken(CKEN_I2S, 1); + clk_enable(clk_i2s); pxa_i2s_wait(); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) @@ -234,8 +240,10 @@ static void pxa2xx_i2s_shutdown(struct snd_pcm_substream *substream) if (SACR1 & (SACR1_DREC | SACR1_DRPL)) { SACR0 &= ~SACR0_ENB; pxa_i2s_wait(); - pxa_set_cken(CKEN_I2S, 0); + clk_disable(clk_i2s); } + + clk_put(clk_i2s); } #ifdef CONFIG_PM -- cgit v1.2.3 From 9f17f2874834f4cdbe48cc05676d8f7558793204 Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Sun, 22 Jun 2008 04:27:28 +0100 Subject: [ARM] 5118/1: pxafb: add exit and remove handlers This patch adds exit and remove handlers to pxafb so that it can be loaded and unloaded as a module. Signed-off-by: Jaya Kumar Acked-by: Krzysztof Helt Acked-by: Eric Miao Signed-off-by: Russell King --- drivers/video/pxafb.c | 44 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 3ee314beacc1..3682bbd7e50e 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1777,11 +1777,49 @@ failed: return ret; } +static int __devexit pxafb_remove(struct platform_device *dev) +{ + struct pxafb_info *fbi = platform_get_drvdata(dev); + struct resource *r; + int irq; + struct fb_info *info; + + if (!fbi) + return 0; + + info = &fbi->fb; + + unregister_framebuffer(info); + + pxafb_disable_controller(fbi); + + if (fbi->fb.cmap.len) + fb_dealloc_cmap(&fbi->fb.cmap); + + irq = platform_get_irq(dev, 0); + free_irq(irq, fbi); + + dma_free_writecombine(&dev->dev, fbi->map_size, + fbi->map_cpu, fbi->map_dma); + + iounmap(fbi->mmio_base); + + r = platform_get_resource(dev, IORESOURCE_MEM, 0); + release_mem_region(r->start, r->end - r->start + 1); + + clk_put(fbi->clk); + kfree(fbi); + + return 0; +} + static struct platform_driver pxafb_driver = { .probe = pxafb_probe, + .remove = pxafb_remove, .suspend = pxafb_suspend, .resume = pxafb_resume, .driver = { + .owner = THIS_MODULE, .name = "pxa2xx-fb", }, }; @@ -1794,7 +1832,13 @@ static int __devinit pxafb_init(void) return platform_driver_register(&pxafb_driver); } +static void __exit pxafb_exit(void) +{ + platform_driver_unregister(&pxafb_driver); +} + module_init(pxafb_init); +module_exit(pxafb_exit); MODULE_DESCRIPTION("loadable framebuffer driver for PXA"); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From f1b23586c1f50d4c5684e56395140ec1cd8b688d Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 30 Jun 2008 18:08:11 +0100 Subject: [ARM] 5135/1: pxa: drop superfluous asm/arch/pxa2xx-gpio.h includes Both i2c-pxa.c and irq.c still include pxa2xx-gpio.h although is is not needed anymore. Signed-off-by: Philipp Zabel Acked-by: Eric Miao Signed-off-by: Russell King --- arch/arm/mach-pxa/irq.c | 1 - drivers/i2c/busses/i2c-pxa.c | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index a9a0c3fab159..fbff557bb225 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -21,7 +21,6 @@ #include #include #include -#include #include "generic.h" diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index eb69fbadc9cb..eb26d2aca8b4 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -39,7 +39,6 @@ #include #include #include -#include struct pxa_i2c { spinlock_t lock; -- cgit v1.2.3 From 5e329d1c7f5fe6adfee99c783fa98bda7dae8ac5 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Fri, 6 Jun 2008 10:12:37 +0100 Subject: [ARM] 5079/1: Warn people when using pxa2xx-gpio.h Warn people when using pxa2xx-gpio.h as it is only here for backwards compatibility. The new mfp-pxa2[57]x.h and the relevant API should be used instead. Signed-off-by: Stefan Schmidt Signed-off-by: Russell King --- include/asm-arm/arch-pxa/pxa2xx-gpio.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h index 763313c5e6be..a6e60f691617 100644 --- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h +++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h @@ -1,6 +1,8 @@ #ifndef __ASM_ARCH_PXA2XX_GPIO_H #define __ASM_ARCH_PXA2XX_GPIO_H +#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h + /* GPIO alternate function assignments */ #define GPIO1_RST 1 /* reset */ -- cgit v1.2.3 From 4ed47896935573c8423d05bddda3f269d6e6c613 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 3 Jul 2008 16:11:06 +0100 Subject: [ARM] mach-types update Update mach-types. Remove invalid or incorrect entries. Signed-off-by: Russell King --- arch/arm/tools/mach-types | 126 +++++++++++++++++++++++++++++++++++++++------- 1 file changed, 109 insertions(+), 17 deletions(-) diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 207a8b5a0c4a..0be5630ff568 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sat Apr 19 11:23:38 2008 +# Last update: Mon Jul 7 16:25:39 2008 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -560,7 +560,6 @@ husky MACH_HUSKY HUSKY 543 boxer MACH_BOXER BOXER 544 shepherd MACH_SHEPHERD SHEPHERD 545 aml42800aa MACH_AML42800AA AML42800AA 546 -ml674001 MACH_MACH_TYPE_ML674001 MACH_TYPE_ML674001 547 lpc2294 MACH_LPC2294 LPC2294 548 switchgrass MACH_SWITCHGRASS SWITCHGRASS 549 ens_cmu MACH_ENS_CMU ENS_CMU 550 @@ -748,7 +747,6 @@ anubis MACH_ANUBIS ANUBIS 734 ite8152 MACH_ITE8152 ITE8152 735 lpc3xxx MACH_LPC3XXX LPC3XXX 736 puppeteer MACH_PUPPETEER PUPPETEER 737 -vt001 MACH_MACH_VADATECH MACH_VADATECH 738 e570 MACH_E570 E570 739 x50 MACH_X50 X50 740 recon MACH_RECON RECON 741 @@ -839,7 +837,7 @@ ccxp270 MACH_CCXP CCXP 825 omap_gsample MACH_OMAP_GSAMPLE OMAP_GSAMPLE 826 realview_eb MACH_REALVIEW_EB REALVIEW_EB 827 samoa MACH_SAMOA SAMOA 828 -t3xscale MACH_T3XSCALE T3XSCALE 829 +palmt3 MACH_PALMT3 PALMT3 829 i878 MACH_I878 I878 830 borzoi MACH_BORZOI BORZOI 831 gecko MACH_GECKO GECKO 832 @@ -895,7 +893,7 @@ mio8390 MACH_MIO8390 MIO8390 881 omi_board MACH_OMI_BOARD OMI_BOARD 882 mx21civ MACH_MX21CIV MX21CIV 883 mahi_cdac MACH_MAHI_CDAC MAHI_CDAC 884 -xscale_palmtx MACH_XSCALE_PALMTX XSCALE_PALMTX 885 +palmtx MACH_PALMTX PALMTX 885 s3c2413 MACH_S3C2413 S3C2413 887 samsys_ep0 MACH_SAMSYS_EP0 SAMSYS_EP0 888 wg302v1 MACH_WG302V1 WG302V1 889 @@ -918,7 +916,7 @@ nxdb500 MACH_NXDB500 NXDB500 905 apf9328 MACH_APF9328 APF9328 906 omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907 omap_twip MACH_OMAP_TWIP OMAP_TWIP 908 -xscale_treo650 MACH_XSCALE_PALMTREO650 XSCALE_PALMTREO650 909 +palmtreo650 MACH_PALMTREO650 PALMTREO650 909 acumen MACH_ACUMEN ACUMEN 910 xp100 MACH_XP100 XP100 911 fs2410 MACH_FS2410 FS2410 912 @@ -926,8 +924,8 @@ pxa270_cerf MACH_PXA270_CERF PXA270_CERF 913 sq2ftlpalm MACH_SQ2FTLPALM SQ2FTLPALM 914 bsemserver MACH_BSEMSERVER BSEMSERVER 915 netclient MACH_NETCLIENT NETCLIENT 916 -xscale_palmtt5 MACH_XSCALE_PALMTT5 XSCALE_PALMTT5 917 -xscale_palmtc MACH_OMAP_PALMTC OMAP_PALMTC 918 +palmt5 MACH_PALMT5 PALMT5 917 +palmtc MACH_PALMTC PALMTC 918 omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919 mxc30030evb MACH_MXC30030EVB MXC30030EVB 920 rea_2d MACH_REA_2D REA_2D 921 @@ -1220,7 +1218,6 @@ empca400 MACH_EMPCA400 EMPCA400 1211 em7210 MACH_EM7210 EM7210 1212 htchermes MACH_HTCHERMES HTCHERMES 1213 eti_c1 MACH_ETI_C1 ETI_C1 1214 -mach_dep2410 MACH_MACH_DEP2410 MACH_DEP2410 1215 ac100 MACH_AC100 AC100 1216 sneetch MACH_SNEETCH SNEETCH 1217 studentmate MACH_STUDENTMATE STUDENTMATE 1218 @@ -1421,10 +1418,10 @@ looxc550 MACH_LOOXC550 LOOXC550 1417 cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418 app3xx MACH_APP3XX APP3XX 1419 sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420 -xscale_palmt700p MACH_XSCALE_PALMT700P XSCALE_PALMT700P 1421 -xscale_palmt700w MACH_XSCALE_PALMT700W XSCALE_PALMT700W 1422 -xscale_palmt750 MACH_XSCALE_PALMT750 XSCALE_PALMT750 1423 -xscale_palmt755p MACH_XSCALE_PALMT755P XSCALE_PALMT755P 1424 +palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421 +palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422 +palmtreo750 MACH_PALMTREO750 PALMTREO750 1423 +palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424 ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425 sarge MACH_SARGE SARGE 1426 a696 MACH_A696 A696 1427 @@ -1463,7 +1460,7 @@ artemis MACH_ARTEMIS ARTEMIS 1462 htctitan MACH_HTCTITAN HTCTITAN 1463 qranium MACH_QRANIUM QRANIUM 1464 adx_wsc2 MACH_ADX_WSC2 ADX_WSC2 1465 -adx_medcom MACH_ADX_MEDINET ADX_MEDINET 1466 +adx_medcom MACH_ADX_MEDCOM ADX_MEDCOM 1466 bboard MACH_BBOARD BBOARD 1467 cambria MACH_CAMBRIA CAMBRIA 1468 mt7xxx MACH_MT7XXX MT7XXX 1469 @@ -1519,7 +1516,7 @@ wp188 MACH_WP188 WP188 1518 corsica MACH_CORSICA CORSICA 1519 bigeye MACH_BIGEYE BIGEYE 1520 tll5000 MACH_TLL5000 TLL5000 1522 -hni270 MACH_HNI_X270 HNI_X270 1523 +bebot MACH_BEBOT BEBOT 1523 qong MACH_QONG QONG 1524 tcompact MACH_TCOMPACT TCOMPACT 1525 puma5 MACH_PUMA5 PUMA5 1526 @@ -1636,7 +1633,6 @@ awlug4lcu MACH_AWLUG4LCU AWLUG4LCU 1637 palermoc MACH_PALERMOC PALERMOC 1638 omap_ldp MACH_OMAP_LDP OMAP_LDP 1639 ip500 MACH_IP500 IP500 1640 -mx35ads MACH_MACH_MX35ADS MACH_MX35ADS 1641 ase2 MACH_ASE2 ASE2 1642 mx35evb MACH_MX35EVB MX35EVB 1643 aml_m8050 MACH_AML_M8050 AML_M8050 1644 @@ -1647,7 +1643,7 @@ badger MACH_BADGER BADGER 1648 trizeps4wl MACH_TRIZEPS4WL TRIZEPS4WL 1649 trizeps5 MACH_TRIZEPS5 TRIZEPS5 1650 marlin MACH_MARLIN MARLIN 1651 -ts7800 MACH_TS7800 TS7800 1652 +ts78xx MACH_TS78XX TS78XX 1652 hpipaq214 MACH_HPIPAQ214 HPIPAQ214 1653 at572d940dcm MACH_AT572D940DCM AT572D940DCM 1654 ne1board MACH_NE1BOARD NE1BOARD 1655 @@ -1720,3 +1716,99 @@ htc_kaiser MACH_HTC_KAISER HTC_KAISER 1724 lg_ks20 MACH_LG_KS20 LG_KS20 1725 hhgps MACH_HHGPS HHGPS 1726 nokia_n810_wimax MACH_NOKIA_N810_WIMAX NOKIA_N810_WIMAX 1727 +insight MACH_INSIGHT INSIGHT 1728 +sapphire MACH_SAPPHIRE SAPPHIRE 1729 +csb637xo MACH_CSB637XO CSB637XO 1730 +evisiong MACH_EVISIONG EVISIONG 1731 +stmp37xx MACH_STMP37XX STMP37XX 1732 +stmp378x MACH_STMP38XX STMP38XX 1733 +tnt MACH_TNT TNT 1734 +tbxt MACH_TBXT TBXT 1735 +playmate MACH_PLAYMATE PLAYMATE 1736 +pns10 MACH_PNS10 PNS10 1737 +eznavi MACH_EZNAVI EZNAVI 1738 +ps4000 MACH_PS4000 PS4000 1739 +ezx_a780 MACH_EZX_A780 EZX_A780 1740 +ezx_e680 MACH_EZX_E680 EZX_E680 1741 +ezx_a1200 MACH_EZX_A1200 EZX_A1200 1742 +ezx_e6 MACH_EZX_E6 EZX_E6 1743 +ezx_e2 MACH_EZX_E2 EZX_E2 1744 +ezx_a910 MACH_EZX_A910 EZX_A910 1745 +cwmx31 MACH_CWMX31 CWMX31 1746 +sl2312 MACH_SL2312 SL2312 1747 +blenny MACH_BLENNY BLENNY 1748 +ds107 MACH_DS107 DS107 1749 +dsx07 MACH_DSX07 DSX07 1750 +picocom1 MACH_PICOCOM1 PICOCOM1 1751 +lynx_wolverine MACH_LYNX_WOLVERINE LYNX_WOLVERINE 1752 +ubisys_p9_sc19 MACH_UBISYS_P9_SC19 UBISYS_P9_SC19 1753 +kratos_low MACH_KRATOS_LOW KRATOS_LOW 1754 +m700 MACH_M700 M700 1755 +edmini_v2 MACH_EDMINI_V2 EDMINI_V2 1756 +zipit2 MACH_ZIPIT2 ZIPIT2 1757 +hslfemtocell MACH_HSLFEMTOCELL HSLFEMTOCELL 1758 +daintree_at91 MACH_DAINTREE_AT91 DAINTREE_AT91 1759 +sg560usb MACH_SG560USB SG560USB 1760 +omap3_pandora MACH_OMAP3_PANDORA OMAP3_PANDORA 1761 +usr8200 MACH_USR8200 USR8200 1762 +s1s65k MACH_S1S65K S1S65K 1763 +s2s65a MACH_S2S65A S2S65A 1764 +icore MACH_ICORE ICORE 1765 +mss2 MACH_MSS2 MSS2 1766 +belmont MACH_BELMONT BELMONT 1767 +asusp525 MACH_ASUSP525 ASUSP525 1768 +lb88rc8480 MACH_LB88RC8480 LB88RC8480 1769 +hipxa MACH_HIPXA HIPXA 1770 +mx25_3ds MACH_MX25_3DS MX25_3DS 1771 +m800 MACH_M800 M800 1772 +omap3530_lv_som MACH_OMAP3530_LV_SOM OMAP3530_LV_SOM 1773 +prima_evb MACH_PRIMA_EVB PRIMA_EVB 1774 +mx31bt1 MACH_MX31BT1 MX31BT1 1775 +atlas4_evb MACH_ATLAS4_EVB ATLAS4_EVB 1776 +mx31cicada MACH_MX31CICADA MX31CICADA 1777 +mi424wr MACH_MI424WR MI424WR 1778 +axs_ultrax MACH_AXS_ULTRAX AXS_ULTRAX 1779 +at572d940deb MACH_AT572D940DEB AT572D940DEB 1780 +davinci_da8xx_evm MACH_DAVINCI_DA8XX_EVM DAVINCI_DA8XX_EVM 1781 +ep9302 MACH_EP9302 EP9302 1782 +at572d940hfeb MACH_AT572D940HFEB AT572D940HFEB 1783 +cybook3 MACH_CYBOOK3 CYBOOK3 1784 +wdg002 MACH_WDG002 WDG002 1785 +sg560adsl MACH_SG560ADSL SG560ADSL 1786 +nextio_n2800_ica MACH_NEXTIO_N2800_ICA NEXTIO_N2800_ICA 1787 +marvell_newdb MACH_MARVELL_NEWDB MARVELL_NEWDB 1789 +vandihud MACH_VANDIHUD VANDIHUD 1790 +magx_e8 MACH_MAGX_E8 MAGX_E8 1791 +magx_z6 MACH_MAGX_Z6 MAGX_Z6 1792 +magx_v8 MACH_MAGX_V8 MAGX_V8 1793 +magx_u9 MACH_MAGX_U9 MAGX_U9 1794 +toughcf08 MACH_TOUGHCF08 TOUGHCF08 1795 +zw4400 MACH_ZW4400 ZW4400 1796 +marat91 MACH_MARAT91 MARAT91 1797 +overo MACH_OVERO OVERO 1798 +at2440evb MACH_AT2440EVB AT2440EVB 1799 +neocore926 MACH_NEOCORE926 NEOCORE926 1800 +wnr854t MACH_WNR854T WNR854T 1801 +imx27 MACH_IMX27 IMX27 1802 +moose_db MACH_MOOSE_DB MOOSE_DB 1803 +fab4 MACH_FAB4 FAB4 1804 +htcdiamond MACH_HTCDIAMOND HTCDIAMOND 1805 +fiona MACH_FIONA FIONA 1806 +mxc30030_x MACH_MXC30030_X MXC30030_X 1807 +bmp1000 MACH_BMP1000 BMP1000 1808 +logi9200 MACH_LOGI9200 LOGI9200 1809 +tqma31 MACH_TQMA31 TQMA31 1810 +ccw9p9215js MACH_CCW9P9215JS CCW9P9215JS 1811 +rd88f5181l_ge MACH_RD88F5181L_GE RD88F5181L_GE 1812 +sifmain MACH_SIFMAIN SIFMAIN 1813 +sam9_l9261 MACH_SAM9_L9261 SAM9_L9261 1814 +cc9m2443js MACH_CC9M2443JS CC9M2443JS 1815 +xaria300 MACH_XARIA300 XARIA300 1816 +it9200 MACH_IT9200 IT9200 1817 +rd88f5181l_fxo MACH_RD88F5181L_FXO RD88F5181L_FXO 1818 +kriss_sensor MACH_KRISS_SENSOR KRISS_SENSOR 1819 +pilz_pmi5 MACH_PILZ_PMI5 PILZ_PMI5 1820 +jade MACH_JADE JADE 1821 +ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822 +gprisc4 MACH_GPRISC4 GPRISC4 1823 +stamp9260 MACH_STAMP9260 STAMP9260 1824 -- cgit v1.2.3 From 3bc5ab9b7f2760d2892fd0a0589e1077e869d4f5 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 7 Jul 2008 16:39:50 +1000 Subject: powerpc: Fix unterminated of_device_id array in legacy_serial.c A recent patch to legacy_serial.c factored out some code by using the of_match_node() facility to match a node against an array of possible matches. However, the patch didn't properly terminate the array causing potential crashes in cases where no match is found. In addition, the name of the array was poorly chosen for a static symbol making debugging harder. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/legacy_serial.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index cf37f5ca4b71..4d96e1db55ee 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -33,13 +33,14 @@ static struct legacy_serial_info { phys_addr_t taddr; } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS]; -static struct __initdata of_device_id parents[] = { +static struct __initdata of_device_id legacy_serial_parents[] = { {.type = "soc",}, {.type = "tsi-bridge",}, {.type = "opb", }, {.compatible = "ibm,opb",}, {.compatible = "simple-bus",}, {.compatible = "wrs,epld-localbus",}, + {}, }; static unsigned int legacy_serial_count; @@ -327,7 +328,7 @@ void __init find_legacy_serial_ports(void) struct device_node *parent = of_get_parent(np); if (!parent) continue; - if (of_match_node(parents, parent) != NULL) { + if (of_match_node(legacy_serial_parents, parent) != NULL) { index = add_legacy_soc_port(np, np); if (index >= 0 && np == stdout) legacy_serial_console = index; -- cgit v1.2.3 From 4ab9897172b7ff3a1a37b65b53f71c5795a577b0 Mon Sep 17 00:00:00 2001 From: Ramax Lo Date: Mon, 7 Jul 2008 18:12:36 +0100 Subject: [ARM] S3C2440: Add AT2440EVB board support Add basic support for AT2440EVB board based on Samsung S3C2440 SoC. Signed-off-by: Ben Dooks Signed-off-by: Ramax Lo --- arch/arm/mach-s3c2440/Kconfig | 5 + arch/arm/mach-s3c2440/Makefile | 1 + arch/arm/mach-s3c2440/mach-at2440evb.c | 162 +++++++++++++++++++++++++++++++++ 3 files changed, 168 insertions(+) create mode 100644 arch/arm/mach-s3c2440/mach-at2440evb.c diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index dcaa4dbebb37..25de042ab996 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -68,6 +68,11 @@ config SMDK2440_CPU2440 default y if ARCH_S3C2440 select CPU_S3C2440 +config MACH_AT2440EVB + bool "Avantech AT2440EVB development board" + select CPU_S3C2440 + help + Say Y here if you are using the AT2440EVB development board endmenu diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile index c81ed6248dcb..0b4440e79b90 100644 --- a/arch/arm/mach-s3c2440/Makefile +++ b/arch/arm/mach-s3c2440/Makefile @@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o +obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c new file mode 100644 index 000000000000..99f660564c11 --- /dev/null +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -0,0 +1,162 @@ +/* linux/arch/arm/mach-s3c2440/mach-at2440evb.c + * + * Copyright (c) 2008 Ramax Lo + * Based on mach-anubis.c by Ben Dooks + * and modifications by SBZ and + * Weibing + * + * For product information, visit http://www.arm9e.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +static struct map_desc at2440evb_iodesc[] __initdata = { + /* Nothing here */ +}; + +#define UCON S3C2410_UCON_DEFAULT +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c24xx_uart_clksrc at2440evb_serial_clocks[] = { + [0] = { + .name = "uclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + }, + [1] = { + .name = "pclk", + .divisor = 1, + .min_baud = 0, + .max_baud = 0, + } +}; + + +static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clocks = at2440evb_serial_clocks, + .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks), + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + .clocks = at2440evb_serial_clocks, + .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks), + }, +}; + +/* NAND Flash on AT2440EVB board */ + +static struct mtd_partition at2440evb_default_nand_part[] = { + [0] = { + .name = "Boot Agent", + .size = SZ_256K, + .offset = 0, + }, + [1] = { + .name = "Kernel", + .size = SZ_2M, + .offset = SZ_256K, + }, + [2] = { + .name = "Root", + .offset = SZ_256K + SZ_2M, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct s3c2410_nand_set at2440evb_nand_sets[] = { + [0] = { + .name = "nand", + .nr_chips = 1, + .nr_partitions = ARRAY_SIZE(at2440evb_default_nand_part), + .partitions = at2440evb_default_nand_part, + }, +}; + +static struct s3c2410_platform_nand at2440evb_nand_info = { + .tacls = 25, + .twrph0 = 55, + .twrph1 = 40, + .nr_sets = ARRAY_SIZE(at2440evb_nand_sets), + .sets = at2440evb_nand_sets, +}; + +static struct platform_device *at2440evb_devices[] __initdata = { + &s3c_device_usb, + &s3c_device_wdt, + &s3c_device_adc, + &s3c_device_i2c, + &s3c_device_rtc, + &s3c_device_nand, +}; + +static void __init at2440evb_map_io(void) +{ + s3c_device_nand.dev.platform_data = &at2440evb_nand_info; + + s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); + s3c24xx_init_clocks(16934400); + s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); +} + +static void __init at2440evb_init(void) +{ + platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices)); +} + + +MACHINE_START(AT2440EVB, "AT2440EVB") + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = at2440evb_map_io, + .init_machine = at2440evb_init, + .init_irq = s3c24xx_init_irq, + .timer = &s3c24xx_timer, +MACHINE_END -- cgit v1.2.3 From 66493c2d88d5086399c5a485d6e41cb76b241a1f Mon Sep 17 00:00:00 2001 From: Ramax Lo Date: Mon, 7 Jul 2008 18:12:37 +0100 Subject: [ARM] AT2440EVB: Add DM9000A network controller support. Add DM9000AEP network controller support for AT2440EVB. Signed-off-by: Ramax Lo Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2440/mach-at2440evb.c | 36 ++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index 99f660564c11..f5e3c7f27639 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -127,6 +128,40 @@ static struct s3c2410_platform_nand at2440evb_nand_info = { .sets = at2440evb_nand_sets, }; +/* DM9000AEP 10/100 ethernet controller */ + +static struct resource at2440evb_dm9k_resource[] = { + [0] = { + .start = S3C2410_CS3, + .end = S3C2410_CS3 + 3, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = S3C2410_CS3 + 4, + .end = S3C2410_CS3 + 7, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = IRQ_EINT7, + .end = IRQ_EINT7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + } +}; + +static struct dm9000_plat_data at2440evb_dm9k_pdata = { + .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM), +}; + +static struct platform_device at2440evb_device_eth = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(at2440evb_dm9k_resource), + .resource = at2440evb_dm9k_resource, + .dev = { + .platform_data = &at2440evb_dm9k_pdata, + }, +}; + static struct platform_device *at2440evb_devices[] __initdata = { &s3c_device_usb, &s3c_device_wdt, @@ -134,6 +169,7 @@ static struct platform_device *at2440evb_devices[] __initdata = { &s3c_device_i2c, &s3c_device_rtc, &s3c_device_nand, + &at2440evb_device_eth, }; static void __init at2440evb_map_io(void) -- cgit v1.2.3 From 29a7bcfd144a577b5cdb3b735c58e20d0489b30e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 7 Jul 2008 18:12:38 +0100 Subject: [ARM] S3C2443: Fix s3c2443_clkcon_enable_p() using wrong register. s3c2443_clkcon_enable_p() was reading from the correct register S3C2443_PCLKCON, but then writing the value back to the wrong register S3C2443_HCLKCON. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2443/clock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index b42f956738d0..24da92417a16 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -81,7 +81,7 @@ static int s3c2443_clkcon_enable_p(struct clk *clk, int enable) else clkcon &= ~clocks; - __raw_writel(clkcon, S3C2443_HCLKCON); + __raw_writel(clkcon, S3C2443_PCLKCON); return 0; } -- cgit v1.2.3 From ba7622a19fabb853b8bbb918a5d76557f88e4274 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 7 Jul 2008 18:12:39 +0100 Subject: [ARM] S3C2443: Add armdiv and arm clocks Add the armdiv and arm clocks to the S3C2443 clock framework and ensure they are correctly setup. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2443/clock.c | 54 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 24da92417a16..d34f3d32eba5 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -221,7 +221,6 @@ static struct clk clk_mdivclk = { .get_rate = s3c2443_getrate_mdivclk, }; - static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent) { unsigned long clksrc = __raw_readl(S3C2443_CLKSRC); @@ -249,6 +248,46 @@ static struct clk clk_msysclk = { .set_parent = s3c2443_setparent_msysclk, }; +/* armdiv + * + * this clock is sourced from msysclk and can have a number of + * divider values applied to it to then be fed into armclk. +*/ + +static struct clk clk_armdiv = { + .name = "armdiv", + .id = -1, + .parent = &clk_msysclk, +}; + +/* armclk + * + * this is the clock fed into the ARM core itself, either from + * armdiv or from hclk. + */ + +static int s3c2443_setparent_armclk(struct clk *clk, struct clk *parent) +{ + unsigned long clkdiv0; + + clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + + if (parent == &clk_armdiv) + clkdiv0 &= ~S3C2443_CLKDIV0_DVS; + else if (parent == &clk_h) + clkdiv0 |= S3C2443_CLKDIV0_DVS; + else + return -EINVAL; + + __raw_writel(clkdiv0, S3C2443_CLKDIV0); + return 0; +} + +static struct clk clk_arm = { + .name = "armclk", + .id = -1, + .set_parent = s3c2443_setparent_armclk, +}; /* esysclk * @@ -887,6 +926,15 @@ static void __init s3c2443_clk_initparents(void) } clk_init_set_parent(&clk_msysclk, parent); + + /* arm */ + + if (__raw_readl(S3C2443_CLKDIV0) & S3C2443_CLKDIV0_DVS) + parent = &clk_h; + else + parent = &clk_armdiv; + + clk_init_set_parent(&clk_arm, parent); } /* armdiv divisor table */ @@ -936,6 +984,8 @@ static struct clk *clks[] __initdata = { &clk_hsspi, &clk_hsmmc_div, &clk_hsmmc, + &clk_armdiv, + &clk_arm, }; void __init s3c2443_init_clocks(int xtal) @@ -958,6 +1008,8 @@ void __init s3c2443_init_clocks(int xtal) hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1); pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); + clk_armdiv.rate = fclk; + s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", -- cgit v1.2.3 From 2e16c27aa379793c354012e5fae0aae89103b19b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 7 Jul 2008 18:12:40 +0100 Subject: [ARM] S3C2443: Add prediv clk and fix setting of h and p clocks Update the S3C2443 clock support to add the prediv clock that is sourced via a divider from msysclk. Also fix the setting of p and h clocks from this prediv clock. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2443/clock.c | 39 +++++++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index d34f3d32eba5..17f064fabdaf 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -678,6 +678,29 @@ static struct clk clk_display = { .round_rate = s3c2443_roundrate_clksrc256, }; +/* prediv + * + * this divides the msysclk down to pass to h/p/etc. + */ + +static unsigned long s3c2443_prediv_getrate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + + clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; + clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; + + return rate / (clkdiv0 + 1); +} + +static struct clk clk_prediv = { + .name = "prediv", + .id = -1, + .parent = &clk_msysclk, + .get_rate = s3c2443_prediv_getrate, +}; + /* standard clock definitions */ static struct clk init_clocks_disable[] = { @@ -957,10 +980,9 @@ static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0) return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]; } -static inline unsigned long s3c2443_get_prediv(unsigned long clkcon0) +static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0) { - clkcon0 &= S3C2443_CLKDIV0_PREDIV_MASK; - clkcon0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; + clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; return clkcon0 + 1; } @@ -986,6 +1008,7 @@ static struct clk *clks[] __initdata = { &clk_hsmmc, &clk_armdiv, &clk_arm, + &clk_prediv, }; void __init s3c2443_init_clocks(int xtal) @@ -1001,15 +1024,19 @@ void __init s3c2443_init_clocks(int xtal) int ret; int ptr; + /* s3c2443 parents h and p clocks from prediv */ + clk_h.parent = &clk_prediv; + clk_p.parent = &clk_prediv; + pll = s3c2443_get_mpll(mpllcon, xtal); + clk_msysclk.rate = pll; fclk = pll / s3c2443_fclk_div(clkdiv0); - hclk = fclk / s3c2443_get_prediv(clkdiv0); + hclk = s3c2443_prediv_getrate(&clk_prediv); + hclk = hclk / s3c2443_get_hdiv(clkdiv0); hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1); pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); - clk_armdiv.rate = fclk; - s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", -- cgit v1.2.3 From 196a047574e1465b89bc41fda573efc9b9be70e5 Mon Sep 17 00:00:00 2001 From: Christer Weinigel Date: Mon, 7 Jul 2008 18:12:41 +0100 Subject: [ARM] Acer n30: Source file cleanups. Clean up some junk from the official kernel. The compile-command is something that's only useful for me personally and doesn't belong in the mainstream kernel. Signed-off-by: Christer Weinigel Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-n30.c | 39 ++++++++++++++++----------------------- 1 file changed, 16 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 621f548da610..fc54e07ccac5 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -1,9 +1,9 @@ -/* linux/arch/arm/mach-s3c2410/mach-n30.c +/* Machine specific code for the Acer n30 PDA. * * Copyright (c) 2003-2005 Simtec Electronics * Ben Dooks * - * Copyright (c) 2005 Christer Weinigel + * Copyright (c) 2005-2008 Christer Weinigel * * There is a wiki with more information about the n30 port at * http://handhelds.org/moin/moin.cgi/AcerN30Documentation . @@ -15,32 +15,32 @@ #include #include -#include -#include -#include -#include + #include -#include +#include +#include #include -#include - -#include -#include -#include +#include +#include #include #include #include #include -#include #include + +#include +#include +#include + #include +#include -#include #include -#include #include +#include +#include static struct map_desc n30_iodesc[] __initdata = { /* nothing here yet */ @@ -75,11 +75,11 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = { }; static struct platform_device *n30_devices[] __initdata = { - &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c, &s3c_device_iis, + &s3c_device_usb, &s3c_device_usbgadget, }; @@ -130,10 +130,3 @@ MACHINE_START(N30, "Acer-N30") .init_irq = n30_init_irq, .map_io = n30_map_io, MACHINE_END - -/* - Local variables: - compile-command: "make ARCH=arm CROSS_COMPILE=/usr/local/arm/3.3.2/bin/arm-linux- -k -C ../../.." - c-basic-offset: 8 - End: -*/ -- cgit v1.2.3 From d088e5fe586287da003341e7bbfdad15e0f432f7 Mon Sep 17 00:00:00 2001 From: Christer Weinigel Date: Mon, 7 Jul 2008 18:12:42 +0100 Subject: [ARM] Acer n30: USB bus pull-up support. Add support for the USB D+ pull up on the Acer N30. This is needed for the USB gadget to work properly. Signed-off-by: Christer Weinigel Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-n30.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index fc54e07ccac5..8edc0c0eb043 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -41,6 +41,7 @@ #include #include #include +#include static struct map_desc n30_iodesc[] __initdata = { /* nothing here yet */ @@ -74,6 +75,29 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = { }, }; +static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd) +{ + switch (cmd) + { + case S3C2410_UDC_P_ENABLE : + s3c2410_gpio_setpin(S3C2410_GPB3, 1); + break; + case S3C2410_UDC_P_DISABLE : + s3c2410_gpio_setpin(S3C2410_GPB3, 0); + break; + case S3C2410_UDC_P_RESET : + break; + default: + break; + } +} + +static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = { + .udc_command = n30_udc_pullup, + .vbus_pin = S3C2410_GPG1, + .vbus_pin_inverted = 0, +}; + static struct platform_device *n30_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, @@ -107,6 +131,7 @@ static void __init n30_init_irq(void) static void __init n30_init(void) { s3c_device_i2c.dev.platform_data = &n30_i2ccfg; + s3c24xx_udc_set_platdata(&n30_udc_cfg); /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ -- cgit v1.2.3 From 620657500263cca4a4d9845eeaeba47e03447075 Mon Sep 17 00:00:00 2001 From: Christer Weinigel Date: Mon, 7 Jul 2008 18:12:43 +0100 Subject: [ARM] Acer n30: GPIO buttons support Add support for the GPIO buttons on the Acer N30. Signed-off-by: Christer Weinigel Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-n30.c | 67 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 8edc0c0eb043..631f3a9e7a60 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -17,7 +17,9 @@ #include #include +#include #include +#include #include #include #include @@ -98,6 +100,70 @@ static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = { .vbus_pin_inverted = 0, }; +static struct gpio_keys_button n30_buttons[] = { + { + .gpio = S3C2410_GPF0, + .code = KEY_POWER, + .desc = "Power", + .active_low = 0, + }, + { + .gpio = S3C2410_GPG9, + .code = KEY_UP, + .desc = "Thumbwheel Up", + .active_low = 0, + }, + { + .gpio = S3C2410_GPG8, + .code = KEY_DOWN, + .desc = "Thumbwheel Down", + .active_low = 0, + }, + { + .gpio = S3C2410_GPG7, + .code = KEY_ENTER, + .desc = "Thumbwheel Press", + .active_low = 0, + }, + { + .gpio = S3C2410_GPF7, + .code = KEY_HOMEPAGE, + .desc = "Home", + .active_low = 0, + }, + { + .gpio = S3C2410_GPF6, + .code = KEY_CALENDAR, + .desc = "Calendar", + .active_low = 0, + }, + { + .gpio = S3C2410_GPF5, + .code = KEY_ADDRESSBOOK, + .desc = "Contacts", + .active_low = 0, + }, + { + .gpio = S3C2410_GPF4, + .code = KEY_MAIL, + .desc = "Mail", + .active_low = 0, + }, +}; + +static struct gpio_keys_platform_data n30_button_data = { + .buttons = n30_buttons, + .nbuttons = ARRAY_SIZE(n30_buttons), +}; + +static struct platform_device n30_button_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &n30_button_data, + } +}; + static struct platform_device *n30_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, @@ -105,6 +171,7 @@ static struct platform_device *n30_devices[] __initdata = { &s3c_device_iis, &s3c_device_usb, &s3c_device_usbgadget, + &n30_button_device, }; static struct s3c2410_platform_i2c n30_i2ccfg = { -- cgit v1.2.3 From 865cc639a636b58612becfb6a337945c022596ac Mon Sep 17 00:00:00 2001 From: Christer Weinigel Date: Mon, 7 Jul 2008 18:12:44 +0100 Subject: [ARM] Acer n30: LED support. Add support for the LEDs on the Acer N30. Signed-off-by: Christer Weinigel Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-n30.c | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 631f3a9e7a60..e1351a7b40ee 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -30,6 +30,7 @@ #include #include +#include #include #include @@ -164,6 +165,40 @@ static struct platform_device n30_button_device = { } }; +/* This is the bluetooth LED on the device. */ +static struct s3c24xx_led_platdata n30_blue_led_pdata = { + .name = "blue_led", + .gpio = S3C2410_GPG6, + .def_trigger = "", +}; + +/* This LED is driven by the battery microcontroller, and is blinking + * red, blinking green or solid green when the battery is low, + * charging or full respectively. By driving GPD9 low, it's possible + * to force the LED to blink red, so call that warning LED. */ +static struct s3c24xx_led_platdata n30_warning_led_pdata = { + .name = "warning_led", + .flags = S3C24XX_LEDF_ACTLOW, + .gpio = S3C2410_GPD9, + .def_trigger = "", +}; + +static struct platform_device n30_blue_led = { + .name = "s3c24xx_led", + .id = 1, + .dev = { + .platform_data = &n30_blue_led_pdata, + }, +}; + +static struct platform_device n30_warning_led = { + .name = "s3c24xx_led", + .id = 2, + .dev = { + .platform_data = &n30_warning_led_pdata, + }, +}; + static struct platform_device *n30_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, @@ -172,6 +207,8 @@ static struct platform_device *n30_devices[] __initdata = { &s3c_device_usb, &s3c_device_usbgadget, &n30_button_device, + &n30_blue_led, + &n30_warning_led, }; static struct s3c2410_platform_i2c n30_i2ccfg = { -- cgit v1.2.3 From 9579087331ee0cd220d29aa5bda79ff55b33c228 Mon Sep 17 00:00:00 2001 From: Christer Weinigel Date: Mon, 7 Jul 2008 18:12:45 +0100 Subject: [ARM] Acer n30: Add support for n35 and related devices. Add support for the Acer N35 and related devices. Signed-off-by: Christer Weinigel Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/Kconfig | 5 +- arch/arm/mach-s3c2410/mach-n30.c | 145 +++++++++++++++++++++++++++++++++++++-- 2 files changed, 144 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 1a7d01b47440..99fdc736698c 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -72,10 +72,11 @@ config PM_H1940 Internal node for H1940 and related PM config MACH_N30 - bool "Acer N30" + bool "Acer N30 family" select CPU_S3C2410 help - Say Y here if you are using the Acer N30 + Say Y here if you want suppt for the Acer N30, Acer N35, + Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index e1351a7b40ee..621b343adbed 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -1,4 +1,5 @@ -/* Machine specific code for the Acer n30 PDA. +/* Machine specific code for the Acer n30, Acer N35, Navman PiN 570, + * Yakumo AlphaX and Airis NC05 PDAs. * * Copyright (c) 2003-2005 Simtec Electronics * Ben Dooks @@ -11,7 +12,7 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -*/ + */ #include #include @@ -68,7 +69,8 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = { .ulcon = 0x43, .ufcon = 0x51, }, - /* The BlueTooth controller is connected to port 2 */ + /* On the N30 the bluetooth controller is connected here. + * On the N35 and variants the GPS receiver is connected here. */ [2] = { .hwport = 2, .flags = 0, @@ -165,6 +167,95 @@ static struct platform_device n30_button_device = { } }; +static struct gpio_keys_button n35_buttons[] = { + { + .gpio = S3C2410_GPF0, + .code = KEY_POWER, + .desc = "Power", + .active_low = 0, + }, + { + .gpio = S3C2410_GPG9, + .code = KEY_UP, + .desc = "Joystick Up", + .active_low = 0, + }, + { + .gpio = S3C2410_GPG8, + .code = KEY_DOWN, + .desc = "Joystick Down", + .active_low = 0, + }, + { + .gpio = S3C2410_GPG6, + .code = KEY_DOWN, + .desc = "Joystick Left", + .active_low = 0, + }, + { + .gpio = S3C2410_GPG5, + .code = KEY_DOWN, + .desc = "Joystick Right", + .active_low = 0, + }, + { + .gpio = S3C2410_GPG7, + .code = KEY_ENTER, + .desc = "Joystick Press", + .active_low = 0, + }, + { + .gpio = S3C2410_GPF7, + .code = KEY_HOMEPAGE, + .desc = "Home", + .active_low = 0, + }, + { + .gpio = S3C2410_GPF6, + .code = KEY_CALENDAR, + .desc = "Calendar", + .active_low = 0, + }, + { + .gpio = S3C2410_GPF5, + .code = KEY_ADDRESSBOOK, + .desc = "Contacts", + .active_low = 0, + }, + { + .gpio = S3C2410_GPF4, + .code = KEY_MAIL, + .desc = "Mail", + .active_low = 0, + }, + { + .gpio = S3C2410_GPF3, + .code = SW_RADIO, + .desc = "GPS Antenna", + .active_low = 0, + }, + { + .gpio = S3C2410_GPG2, + .code = SW_HEADPHONE_INSERT, + .desc = "Headphone", + .active_low = 0, + }, +}; + +static struct gpio_keys_platform_data n35_button_data = { + .buttons = n35_buttons, + .nbuttons = ARRAY_SIZE(n35_buttons), +}; + +static struct platform_device n35_button_device = { + .name = "gpio-keys", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &n35_button_data, + } +}; + /* This is the bluetooth LED on the device. */ static struct s3c24xx_led_platdata n30_blue_led_pdata = { .name = "blue_led", @@ -211,6 +302,15 @@ static struct platform_device *n30_devices[] __initdata = { &n30_warning_led, }; +static struct platform_device *n35_devices[] __initdata = { + &s3c_device_lcd, + &s3c_device_wdt, + &s3c_device_i2c, + &s3c_device_iis, + &s3c_device_usbgadget, + &n35_button_device, +}; + static struct s3c2410_platform_i2c n30_i2ccfg = { .flags = 0, .slave_addr = 0x10, @@ -244,7 +344,32 @@ static void __init n30_init(void) S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); - platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices)); + if (machine_is_n30()) { + /* Turn off suspend on both USB ports, and switch the + * selectable USB port to USB device mode. */ + s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | + S3C2410_MISCCR_USBSUSPND0 | + S3C2410_MISCCR_USBSUSPND1, 0x0); + + platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices)); + } + + if (machine_is_n35()) { + /* Turn off suspend and switch the selectable USB port + * to USB device mode. Turn on suspend for the host + * port since it is not connected on the N35. + * + * Actually, the host port is available at some pads + * on the back of the device, so it would actually be + * possible to add a USB device inside the N35 if you + * are willing to do some hardware modifications. */ + s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | + S3C2410_MISCCR_USBSUSPND0 | + S3C2410_MISCCR_USBSUSPND1, + S3C2410_MISCCR_USBSUSPND1); + + platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices)); + } } MACHINE_START(N30, "Acer-N30") @@ -259,3 +384,15 @@ MACHINE_START(N30, "Acer-N30") .init_irq = n30_init_irq, .map_io = n30_map_io, MACHINE_END + +MACHINE_START(N35, "Acer-N35") + /* Maintainer: Christer Weinigel + */ + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .timer = &s3c24xx_timer, + .init_machine = n30_init, + .init_irq = n30_init_irq, + .map_io = n30_map_io, +MACHINE_END -- cgit v1.2.3 From e43f238390168a13416d4f21803f76b1ff45fb95 Mon Sep 17 00:00:00 2001 From: Christer Weinigel Date: Mon, 7 Jul 2008 18:12:46 +0100 Subject: [ARM] Acer n30: LCD support. This patch adds the configuration needed for the LCD display on the n30. Signed-off-by: Christer Weinigel Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-n30.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 621b343adbed..476b15c089a7 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -31,8 +31,10 @@ #include #include +#include #include #include +#include #include #include @@ -290,6 +292,31 @@ static struct platform_device n30_warning_led = { }, }; +static struct s3c2410fb_display n30_display __initdata = { + .type = S3C2410_LCDCON1_TFT, + .width = 240, + .height = 320, + .pixclock = 170000, + .xres = 240, + .yres = 320, + .bpp = 16, + .left_margin = 3, + .right_margin = 40, + .hsync_len = 40, + .upper_margin = 2, + .lower_margin = 3, + .vsync_len = 2, + + .lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME, +}; + +static struct s3c2410fb_mach_info n30_fb_info __initdata = { + .displays = &n30_display, + .num_displays = 1, + .default_display = 0, + .lpcsel= 0x06, +}; + static struct platform_device *n30_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, @@ -334,6 +361,7 @@ static void __init n30_init_irq(void) static void __init n30_init(void) { + s3c24xx_fb_set_platdata(&n30_fb_info); s3c_device_i2c.dev.platform_data = &n30_i2ccfg; s3c24xx_udc_set_platdata(&n30_udc_cfg); -- cgit v1.2.3 From 9a2ddb7866c2887352e85c6443dfb5e679140aff Mon Sep 17 00:00:00 2001 From: Christer Weinigel Date: Mon, 7 Jul 2008 18:12:47 +0100 Subject: [ARM] Acer n30: Hardware initialisation. Initialise the hardware register settings on boot, to allow the device to function correctly. Signed-off-by: Christer Weinigel Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-n30.c | 139 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 139 insertions(+) diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 476b15c089a7..450d10823f83 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -345,9 +345,148 @@ static struct s3c2410_platform_i2c n30_i2ccfg = { .max_freq = 10*1000, }; +/* Lots of hardcoded stuff, but it sets up the hardware in a useful + * state so that we can boot Linux directly from flash. */ +static void __init n30_hwinit(void) +{ + /* GPA0-11 special functions -- unknown what they do + * GPA12 N30 special function -- unknown what it does + * N35/PiN output -- unknown what it does + * + * A12 is nGCS1 on the N30 and an output on the N35/PiN. I + * don't think it does anything useful on the N30, so I ought + * to make it an output there too since it always driven to 0 + * as far as I can tell. */ + if (machine_is_n30()) + __raw_writel(0x007fffff, S3C2410_GPACON); + if (machine_is_n35()) + __raw_writel(0x007fefff, S3C2410_GPACON); + __raw_writel(0x00000000, S3C2410_GPADAT); + + /* GPB0 TOUT0 backlight level + * GPB1 output 1=backlight on + * GPB2 output IrDA enable 0=transceiver enabled, 1=disabled + * GPB3 output USB D+ pull up 0=disabled, 1=enabled + * GPB4 N30 output -- unknown function + * N30/PiN GPS control 0=GPS enabled, 1=GPS disabled + * GPB5 output -- unknown function + * GPB6 input -- unknown function + * GPB7 output -- unknown function + * GPB8 output -- probably LCD driver enable + * GPB9 output -- probably LCD VSYNC driver enable + * GPB10 output -- probably LCD HSYNC driver enable + */ + __raw_writel(0x00154556, S3C2410_GPBCON); + __raw_writel(0x00000750, S3C2410_GPBDAT); + __raw_writel(0x00000073, S3C2410_GPBUP); + + /* GPC0 input RS232 DCD/DSR/RI + * GPC1 LCD + * GPC2 output RS232 DTR? + * GPC3 input RS232 DCD/DSR/RI + * GPC4 LCD + * GPC5 output 0=NAND write enabled, 1=NAND write protect + * GPC6 input -- unknown function + * GPC7 input charger status 0=charger connected + * this input can be triggered by power on the USB device + * port too, but will go back to disconnected soon after. + * GPC8 N30/N35 output -- unknown function, always driven to 1 + * PiN input -- unknown function, always read as 1 + * Make it an input with a pull up for all models. + * GPC9-15 LCD + */ + __raw_writel(0xaaa80618, S3C2410_GPCCON); + __raw_writel(0x0000014c, S3C2410_GPCDAT); + __raw_writel(0x0000fef2, S3C2410_GPCUP); + + /* GPD0 input -- unknown function + * GPD1-D7 LCD + * GPD8 N30 output -- unknown function + * N35/PiN output 1=GPS LED on + * GPD9 output 0=power led blinks red, 1=normal power led function + * GPD10 output -- unknown function + * GPD11-15 LCD drivers + */ + __raw_writel(0xaa95aaa4, S3C2410_GPDCON); + __raw_writel(0x00000601, S3C2410_GPDDAT); + __raw_writel(0x0000fbfe, S3C2410_GPDUP); + + /* GPE0-4 I2S audio bus + * GPE5-10 SD/MMC bus + * E11-13 outputs -- unknown function, probably power management + * E14-15 I2C bus connected to the battery controller + */ + __raw_writel(0xa56aaaaa, S3C2410_GPECON); + __raw_writel(0x0000efc5, S3C2410_GPEDAT); + __raw_writel(0x0000f81f, S3C2410_GPEUP); + + /* GPF0 input 0=power button pressed + * GPF1 input SD/MMC switch 0=card present + * GPF2 N30 1=reset button pressed (inverted compared to the rest) + * N35/PiN 0=reset button pressed + * GPF3 N30/PiN input -- unknown function + * N35 input GPS antenna position, 0=antenna closed, 1=open + * GPF4 input 0=button 4 pressed + * GPF5 input 0=button 3 pressed + * GPF6 input 0=button 2 pressed + * GPF7 input 0=button 1 pressed + */ + __raw_writel(0x0000aaaa, S3C2410_GPFCON); + __raw_writel(0x00000000, S3C2410_GPFDAT); + __raw_writel(0x000000ff, S3C2410_GPFUP); + + /* GPG0 input RS232 DCD/DSR/RI + * GPG1 input 1=USB gadget port has power from a host + * GPG2 N30 input -- unknown function + * N35/PiN input 0=headphones plugged in, 1=not plugged in + * GPG3 N30 output -- unknown function + * N35/PiN input with unknown function + * GPG4 N30 output 0=MMC enabled, 1=MMC disabled + * GPG5 N30 output 0=BlueTooth chip disabled, 1=enabled + * N35/PiN input joystick right + * GPG6 N30 output 0=blue led on, 1=off + * N35/PiN input joystick left + * GPG7 input 0=thumbwheel pressed + * GPG8 input 0=thumbwheel down + * GPG9 input 0=thumbwheel up + * GPG10 input SD/MMC write protect switch + * GPG11 N30 input -- unknown function + * N35 output 0=GPS antenna powered, 1=not powered + * PiN output -- unknown function + * GPG12-15 touch screen functions + * + * The pullups differ between the models, so enable all + * pullups that are enabled on any of the models. + */ + if (machine_is_n30()) + __raw_writel(0xff0a956a, S3C2410_GPGCON); + if (machine_is_n35()) + __raw_writel(0xff4aa92a, S3C2410_GPGCON); + __raw_writel(0x0000e800, S3C2410_GPGDAT); + __raw_writel(0x0000f86f, S3C2410_GPGUP); + + /* GPH0/1/2/3 RS232 serial port + * GPH4/5 IrDA serial port + * GPH6/7 N30 BlueTooth serial port + * N35/PiN GPS receiver + * GPH8 input -- unknown function + * GPH9 CLKOUT0 HCLK -- unknown use + * GPH10 CLKOUT1 FCLK -- unknown use + * + * The pull ups for H6/H7 are enabled on N30 but not on the + * N35/PiN. I suppose is useful for a budget model of the N30 + * with no bluetooh. It doesn't hurt to have the pull ups + * enabled on the N35, so leave them enabled for all models. + */ + __raw_writel(0x0028aaaa, S3C2410_GPHCON); + __raw_writel(0x000005ef, S3C2410_GPHDAT); + __raw_writel(0x0000063f, S3C2410_GPHUP); +} + static void __init n30_map_io(void) { s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); + n30_hwinit(); s3c24xx_init_clocks(0); s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); } -- cgit v1.2.3 From a67557801aeda1f9f19e4606a00c948f6054417c Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 7 Jul 2008 18:12:48 +0100 Subject: [ARM] Acer n30: Minor style and indentation fixes. Minor style fixes. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-n30.c | 56 ++++++++++++++++++++-------------------- 1 file changed, 28 insertions(+), 28 deletions(-) diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 450d10823f83..43c2e915c5bf 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -84,18 +84,17 @@ static struct s3c2410_uartcfg n30_uartcfgs[] = { static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd) { - switch (cmd) - { - case S3C2410_UDC_P_ENABLE : - s3c2410_gpio_setpin(S3C2410_GPB3, 1); - break; - case S3C2410_UDC_P_DISABLE : - s3c2410_gpio_setpin(S3C2410_GPB3, 0); - break; - case S3C2410_UDC_P_RESET : - break; - default: - break; + switch (cmd) { + case S3C2410_UDC_P_ENABLE : + s3c2410_gpio_setpin(S3C2410_GPB3, 1); + break; + case S3C2410_UDC_P_DISABLE : + s3c2410_gpio_setpin(S3C2410_GPB3, 0); + break; + case S3C2410_UDC_P_RESET : + break; + default: + break; } } @@ -293,28 +292,29 @@ static struct platform_device n30_warning_led = { }; static struct s3c2410fb_display n30_display __initdata = { - .type = S3C2410_LCDCON1_TFT, - .width = 240, - .height = 320, - .pixclock = 170000, - .xres = 240, - .yres = 320, - .bpp = 16, - .left_margin = 3, - .right_margin = 40, - .hsync_len = 40, - .upper_margin = 2, - .lower_margin = 3, - .vsync_len = 2, + .type = S3C2410_LCDCON1_TFT, + .width = 240, + .height = 320, + .pixclock = 170000, + + .xres = 240, + .yres = 320, + .bpp = 16, + .left_margin = 3, + .right_margin = 40, + .hsync_len = 40, + .upper_margin = 2, + .lower_margin = 3, + .vsync_len = 2, .lcdcon5 = S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME, }; static struct s3c2410fb_mach_info n30_fb_info __initdata = { - .displays = &n30_display, - .num_displays = 1, + .displays = &n30_display, + .num_displays = 1, .default_display = 0, - .lpcsel= 0x06, + .lpcsel = 0x06, }; static struct platform_device *n30_devices[] __initdata = { -- cgit v1.2.3 From 7ba06b17a1931b2c9e1bee525a8c36920f5be0e0 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 7 Jul 2008 18:12:49 +0100 Subject: [ARM] s3c2410_defconfig: update for current build Update the s3c2410_defconfig for the current set of added patches. Signed-off-by: Ben Dooks --- arch/arm/configs/s3c2410_defconfig | 34 +++++++++++++++++++++++++++------- 1 file changed, 27 insertions(+), 7 deletions(-) diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 1a0434b0079c..3796397fde20 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc8 -# Thu Jul 3 11:48:41 2008 +# Mon Jul 7 16:59:23 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -12,7 +12,6 @@ CONFIG_MMU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y @@ -24,7 +23,6 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -133,6 +131,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set @@ -146,11 +145,8 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set @@ -165,6 +161,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_MSM7X00A is not set CONFIG_PLAT_S3C24XX=y CONFIG_CPU_S3C244X=y +# CONFIG_S3C24XX_PWM is not set CONFIG_PM_SIMTEC=y CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set @@ -194,6 +191,8 @@ CONFIG_CPU_S3C2410_DMA=y CONFIG_S3C2410_PM=y CONFIG_S3C2410_GPIO=y CONFIG_S3C2410_CLOCK=y +CONFIG_SIMTEC_NOR=y +CONFIG_MACH_BAST_IDE=y # # S3C2410 Machines @@ -216,6 +215,7 @@ CONFIG_S3C2412_PM=y # # S3C2412 Machines # +# CONFIG_MACH_JIVE is not set CONFIG_MACH_SMDK2413=y CONFIG_MACH_S3C2413=y # CONFIG_MACH_SMDK2412 is not set @@ -232,6 +232,7 @@ CONFIG_MACH_RX3715=y CONFIG_ARCH_S3C2440=y CONFIG_MACH_NEXCODER_2440=y CONFIG_SMDK2440_CPU2440=y +# CONFIG_MACH_AT2440EVB is not set CONFIG_CPU_S3C2442=y # @@ -712,6 +713,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_ATA is not set +CONFIG_HAVE_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set @@ -926,6 +928,7 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -951,6 +954,23 @@ CONFIG_SPI_S3C24XX_GPIO=m # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -1036,6 +1056,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501=y # CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # @@ -1552,7 +1573,6 @@ CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set # CONFIG_SAMPLES is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y -- cgit v1.2.3 From 4f81c5350b44bcc501ab6f8a089b16d064b4d2f6 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Mon, 7 Jul 2008 13:36:56 -0400 Subject: [UML] fix gcc ICEs and unresolved externs There are various constraints on the use of unit-at-a-time: - i386 uses no-unit-at-a-time for pre-4.0 (not 4.3) - x86_64 uses unit-at-a-time always Uli reported a crash on x86_64 with gcc 4.1.2 with unit-at-a-time, resulting in commit c0a18111e571138747a98af18b3a2124df56a0d1 Ingo reported a gcc internal error with gcc 4.3 with no-unit-at-a-timem, resulting in 22eecde2f9034764a3fd095eecfa3adfb8ec9a98 Benny Halevy is seeing extern inlines not resolved with gcc 4.3 with no-unit-at-a-time This patch reintroduces unit-at-a-time for gcc >= 4.0, bringing back the possibility of Uli's crash. If that happens, we'll debug it. I started seeing both the internal compiler errors and unresolved inlines on Fedora 9. This patch fixes both problems, without so far reintroducing the crash reported by Uli. Signed-off-by: Jeff Dike Cc: Benny Halevy Cc: Adrian Bunk Cc: Ingo Molnar Cc: Ulrich Drepper Signed-off-by: Linus Torvalds --- arch/um/Makefile | 1 - arch/um/Makefile-i386 | 7 +++++++ arch/um/Makefile-x86_64 | 3 +++ 3 files changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/um/Makefile b/arch/um/Makefile index dbeab15e7bb7..ca40397017b9 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -77,7 +77,6 @@ include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS) KERNEL_DEFINES = $(strip -Derrno=kernel_errno -Dsigprocmask=kernel_sigprocmask \ -Dmktime=kernel_mktime $(ARCH_KERNEL_DEFINES)) KBUILD_CFLAGS += $(KERNEL_DEFINES) -KBUILD_CFLAGS += $(call cc-option,-fno-unit-at-a-time,) PHONY += linux diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386 index 561e373bd850..302cbe504543 100644 --- a/arch/um/Makefile-i386 +++ b/arch/um/Makefile-i386 @@ -32,4 +32,11 @@ cflags-y += $(call cc-option,-mpreferred-stack-boundary=2) # an unresolved reference. cflags-y += -ffreestanding +# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use +# a lot more stack due to the lack of sharing of stacklots. Also, gcc +# 4.3.0 needs -funit-at-a-time for extern inline functions. +KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \ + echo $(call cc-option,-fno-unit-at-a-time); \ + else echo $(call cc-option,-funit-at-a-time); fi ;) + KBUILD_CFLAGS += $(cflags-y) diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64 index 8ed362f93582..a9cd7e77a7ab 100644 --- a/arch/um/Makefile-x86_64 +++ b/arch/um/Makefile-x86_64 @@ -21,3 +21,6 @@ HEADER_ARCH := x86 LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib64 LINK-y += -m64 + +# Do unit-at-a-time unconditionally on x86_64, following the host +KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time) -- cgit v1.2.3 From 18c6ac383f3e46cfce08d0bf972705852a4e1268 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 7 Jul 2008 10:06:29 -0700 Subject: [PATCH] ocfs2/dlm: Fixes oops in dlm_new_lockres() Patch fixes a race that can result in an oops while adding a lockres to the dlm lockres tracking list. Bug introduced by mainline commit 29576f8bb54045be944ba809d4fca1ad77c94165. Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh --- fs/ocfs2/dlm/dlmmaster.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index efc015c6128a..44f87caf3683 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -606,7 +606,9 @@ static void dlm_init_lockres(struct dlm_ctxt *dlm, res->last_used = 0; + spin_lock(&dlm->spinlock); list_add_tail(&res->tracking, &dlm->tracking_list); + spin_unlock(&dlm->spinlock); memset(res->lvb, 0, DLM_LVB_LEN); memset(res->refmap, 0, sizeof(res->refmap)); -- cgit v1.2.3 From 739db07f82767e7634176d18af2acbe77b11fd42 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 7 Jul 2008 09:55:26 -0700 Subject: Revert "PCI: Correct last two HP entries in the bfsort whitelist" This reverts commit a1676072558854b95336c8f7db76b0504e909a0a. It duplicates the change from 8d64c781f0c5fbfdf8016bd1634506ff2ad1376a and only one should be applied, otherwise some of the Dell quirks are lost. Thanks to Tony Camuso for catching this. Acked-by: Tony Camuso Signed-off-by: Jesse Barnes --- arch/x86/pci/common.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 940185ecaeda..6e64aaf00d1d 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -328,18 +328,18 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { #endif { .callback = set_bf_sort, - .ident = "HP ProLiant DL360", + .ident = "HP ProLiant DL385 G2", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "HP"), - DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"), }, }, { .callback = set_bf_sort, - .ident = "HP ProLiant DL380", + .ident = "HP ProLiant DL585 G2", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "HP"), - DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"), }, }, {} -- cgit v1.2.3 From fcee7a01ad7516eeb8dfdd0a17ef04cd2ee30757 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 2 Jul 2008 11:04:24 -0400 Subject: hostap_cs: correct poor NULL checks in suspend/resume routines This corrects this kernel.org bug: http://bugzilla.kernel.org/show_bug.cgi?id=9701 Signed-off-by: John W. Linville --- drivers/net/wireless/hostap/hostap_cs.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 80039a0ae027..3b4e55cf33cd 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -777,8 +777,10 @@ static int hostap_cs_suspend(struct pcmcia_device *link) int dev_open = 0; struct hostap_interface *iface = NULL; - if (dev) - iface = netdev_priv(dev); + if (!dev) + return -ENODEV; + + iface = netdev_priv(dev); PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info); if (iface && iface->local) @@ -798,8 +800,10 @@ static int hostap_cs_resume(struct pcmcia_device *link) int dev_open = 0; struct hostap_interface *iface = NULL; - if (dev) - iface = netdev_priv(dev); + if (!dev) + return -ENODEV; + + iface = netdev_priv(dev); PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info); -- cgit v1.2.3 From 0ff1cca0e272045b9c11a2ff94bd3e6893c9308c Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Thu, 3 Jul 2008 09:41:38 +1000 Subject: drivers/net/wireless/iwlwifi/iwl-3945.c Fix type issue on 64bit Coverity CID: 2265 NEGATIVE_RETURNS "rate" is of an unsigned type, and the code requires a signed type. The following patch makes it so. Signed-off-by: Darren Jenkins Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index f5387a7a76c0..55ac850744b3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -449,7 +449,7 @@ static void iwl3945_dbg_report_frame(struct iwl3945_priv *priv, if (print_summary) { char *title; - u32 rate; + int rate; if (hundred) title = "100Frames"; @@ -487,7 +487,7 @@ static void iwl3945_dbg_report_frame(struct iwl3945_priv *priv, * but you can hack it to show more, if you'd like to. */ if (dataframe) IWL_DEBUG_RX("%s: mhd=0x%04x, dst=0x%02x, " - "len=%u, rssi=%d, chnl=%d, rate=%u, \n", + "len=%u, rssi=%d, chnl=%d, rate=%d, \n", title, fc, header->addr1[5], length, rssi, channel, rate); else { -- cgit v1.2.3 From 8db9369ff92b1cd93566baadd8bd2992f025fdd0 Mon Sep 17 00:00:00 2001 From: Guy Cohen Date: Thu, 3 Jul 2008 19:56:13 +0300 Subject: mac80211: move netif_carrier_on to after ieee80211_bss_info_change_notify Putting netif_carrier_on before configuring the driver/device with the new association state may cause a race (tx frames may be sent before configuration is done) Signed-off-by: Guy Cohen Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 4d2b582dd055..a7018540ae89 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -547,15 +547,14 @@ static void ieee80211_set_associated(struct net_device *dev, sdata->bss_conf.ht_bss_conf = &conf->ht_bss_conf; } - netif_carrier_on(dev); ifsta->flags |= IEEE80211_STA_PREV_BSSID_SET; memcpy(ifsta->prev_bssid, sdata->u.sta.bssid, ETH_ALEN); memcpy(wrqu.ap_addr.sa_data, sdata->u.sta.bssid, ETH_ALEN); ieee80211_sta_send_associnfo(dev, ifsta); } else { + netif_carrier_off(dev); ieee80211_sta_tear_down_BA_sessions(dev, ifsta->bssid); ifsta->flags &= ~IEEE80211_STA_ASSOCIATED; - netif_carrier_off(dev); ieee80211_reset_erp_info(dev); sdata->bss_conf.assoc_ht = 0; @@ -569,6 +568,10 @@ static void ieee80211_set_associated(struct net_device *dev, sdata->bss_conf.assoc = assoc; ieee80211_bss_info_change_notify(sdata, changed); + + if (assoc) + netif_carrier_on(dev); + wrqu.ap_addr.sa_family = ARPHRD_ETHER; wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); } -- cgit v1.2.3 From ea0c925370b33baf168bb33782c613468c1aa119 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Thu, 3 Jul 2008 19:02:44 +0200 Subject: mac80211: Only flush workqueue when last interface was removed Currently the ieee80211_hw->workqueue is flushed each time an interface is being removed. However most scheduled work is not interface specific but device specific, for example things like periodic work for link tuners. This patch will move the flush_workqueue() call to directly behind the call to ops->stop() to make sure the workqueue is only flushed when all interfaces are gone and there really shouldn't be any scheduled work in the drivers left. Signed-off-by: Ivo van Doorn Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 98c0b5e56ecc..df0836ff1a20 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -530,8 +530,6 @@ static int ieee80211_stop(struct net_device *dev) local->sta_hw_scanning = 0; } - flush_workqueue(local->hw.workqueue); - sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED; kfree(sdata->u.sta.extra_ie); sdata->u.sta.extra_ie = NULL; @@ -555,6 +553,8 @@ static int ieee80211_stop(struct net_device *dev) ieee80211_led_radio(local, 0); + flush_workqueue(local->hw.workqueue); + tasklet_disable(&local->tx_pending_tasklet); tasklet_disable(&local->tasklet); } -- cgit v1.2.3 From 9dfd55008e3863dcd93219c74bf05b09e5c549e2 Mon Sep 17 00:00:00 2001 From: Firat Birlik Date: Fri, 4 Jul 2008 04:31:50 +0100 Subject: zd1211rw: add ID for AirTies WUS-201 I would like to inform you of our zd1211 based usb wifi adapter (AirTies WUS-201), which works with the zd1211rw driver with the following device id definition. Signed-off-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index 8941f5eb96c2..6cdad9764604 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -64,6 +64,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x083a, 0xe506), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x13b1, 0x0024), .driver_info = DEVICE_ZD1211B }, -- cgit v1.2.3 From 9e095a687b3561972272063260e14ab1bc21de08 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 4 Jul 2008 23:44:37 +0200 Subject: ssb-pcicore: Fix IRQ-vector init on embedded devices On embedded devices we must not route the interrupts through the PCI core, if our host-bus is not PCI. Reported-by: Steve Brown Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/ssb/driver_pcicore.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index d28c53868093..538c570df337 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -537,6 +537,13 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, int err = 0; u32 tmp; + if (dev->bus->bustype != SSB_BUSTYPE_PCI) { + /* This SSB device is not on a PCI host-bus. So the IRQs are + * not routed through the PCI core. + * So we must not enable routing through the PCI core. */ + goto out; + } + if (!pdev) goto out; bus = pdev->bus; -- cgit v1.2.3 From 6e43829bb69bf1d584a592075f1357590eb49b1a Mon Sep 17 00:00:00 2001 From: Vladimir Koutny Date: Mon, 7 Jul 2008 14:23:01 +0200 Subject: mac80211: don't report selected IBSS when not found Don't report a 'selected' IBSS in sta_find_ibss when none was found. Signed-off-by: Vladimir Koutny Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a7018540ae89..b404537c0bcd 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3614,8 +3614,10 @@ static int ieee80211_sta_find_ibss(struct net_device *dev, spin_unlock_bh(&local->sta_bss_lock); #ifdef CONFIG_MAC80211_IBSS_DEBUG - printk(KERN_DEBUG " sta_find_ibss: selected %s current " - "%s\n", print_mac(mac, bssid), print_mac(mac2, ifsta->bssid)); + if (found) + printk(KERN_DEBUG " sta_find_ibss: selected %s current " + "%s\n", print_mac(mac, bssid), + print_mac(mac2, ifsta->bssid)); #endif /* CONFIG_MAC80211_IBSS_DEBUG */ if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0 && (bss = ieee80211_rx_bss_get(dev, bssid, -- cgit v1.2.3 From 2f8209788d774c66efb5e2991affc06b1d1c7314 Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Thu, 26 Jun 2008 01:30:41 +0200 Subject: [ARM] Orion: add Netgear WNR854T support Signed-off-by: Imre Kaloz Signed-off-by: Lennert Buytenhek --- arch/arm/mach-orion5x/Kconfig | 6 ++ arch/arm/mach-orion5x/Makefile | 1 + arch/arm/mach-orion5x/wnr854t-setup.c | 164 ++++++++++++++++++++++++++++++++++ 3 files changed, 171 insertions(+) create mode 100644 arch/arm/mach-orion5x/wnr854t-setup.c diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index f8b91ea3eb73..99b35b718b8c 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -74,6 +74,12 @@ config MACH_MSS2 Say 'Y' here if you want your kernel to support the Maxtor Shared Storage II platform. +config MACH_WNR854T + bool "Netgear WNR854T" + help + Say 'Y' here if you want your kernel to support the + Netgear WNR854T platform. + endmenu endif diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 65b2fc6a3552..26a62ede37ae 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o obj-$(CONFIG_MACH_MSS2) += mss2-setup.o +obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c new file mode 100644 index 000000000000..1af093ff8cf3 --- /dev/null +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -0,0 +1,164 @@ +/* + * arch/arm/mach-orion5x/wnr854t-setup.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +static struct orion5x_mpp_mode wnr854t_mpp_modes[] __initdata = { + { 0, MPP_GPIO }, /* Power LED green (0=on) */ + { 1, MPP_GPIO }, /* Reset Button (0=off) */ + { 2, MPP_GPIO }, /* Power LED blink (0=off) */ + { 3, MPP_GPIO }, /* WAN Status LED amber (0=off) */ + { 4, MPP_GPIO }, /* PCI int */ + { 5, MPP_GPIO }, /* ??? */ + { 6, MPP_GPIO }, /* ??? */ + { 7, MPP_GPIO }, /* ??? */ + { 8, MPP_UNUSED }, /* ??? */ + { 9, MPP_GIGE }, /* GE_RXERR */ + { 10, MPP_UNUSED }, /* ??? */ + { 11, MPP_UNUSED }, /* ??? */ + { 12, MPP_GIGE }, /* GE_TXD[4] */ + { 13, MPP_GIGE }, /* GE_TXD[5] */ + { 14, MPP_GIGE }, /* GE_TXD[6] */ + { 15, MPP_GIGE }, /* GE_TXD[7] */ + { 16, MPP_GIGE }, /* GE_RXD[4] */ + { 17, MPP_GIGE }, /* GE_RXD[5] */ + { 18, MPP_GIGE }, /* GE_RXD[6] */ + { 19, MPP_GIGE }, /* GE_RXD[7] */ + { -1 }, +}; + +/* + * 8M NOR flash Device bus boot chip select + */ +#define WNR854T_NOR_BOOT_BASE 0xf4000000 +#define WNR854T_NOR_BOOT_SIZE SZ_8M + +static struct mtd_partition wnr854t_nor_flash_partitions[] = { + { + .name = "kernel", + .offset = 0x00000000, + .size = 0x00100000, + }, { + .name = "rootfs", + .offset = 0x00100000, + .size = 0x00660000, + }, { + .name = "uboot", + .offset = 0x00760000, + .size = 0x00040000, + }, +}; + +static struct physmap_flash_data wnr854t_nor_flash_data = { + .width = 2, + .parts = wnr854t_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(wnr854t_nor_flash_partitions), +}; + +static struct resource wnr854t_nor_flash_resource = { + .flags = IORESOURCE_MEM, + .start = WNR854T_NOR_BOOT_BASE, + .end = WNR854T_NOR_BOOT_BASE + WNR854T_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device wnr854t_nor_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &wnr854t_nor_flash_data, + }, + .num_resources = 1, + .resource = &wnr854t_nor_flash_resource, +}; + +static struct mv643xx_eth_platform_data wnr854t_eth_data = { + .phy_addr = -1, +}; + +static void __init wnr854t_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + orion5x_mpp_conf(wnr854t_mpp_modes); + + /* + * Configure peripherals. + */ + orion5x_eth_init(&wnr854t_eth_data); + orion5x_uart0_init(); + + orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE, + WNR854T_NOR_BOOT_SIZE); + platform_device_register(&wnr854t_nor_flash); +} + +static int __init wnr854t_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + /* + * Mini-PCI slot. + */ + if (slot == 7) + return gpio_to_irq(4); + + return -1; +} + +static struct hw_pci wnr854t_pci __initdata = { + .nr_controllers = 2, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = wnr854t_pci_map_irq, +}; + +static int __init wnr854t_pci_init(void) +{ + if (machine_is_wnr854t()) + pci_common_init(&wnr854t_pci); + + return 0; +} +subsys_initcall(wnr854t_pci_init); + +MACHINE_START(WNR854T, "Netgear WNR854T") + /* Maintainer: Imre Kaloz */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = wnr854t_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END -- cgit v1.2.3 From 70129132322cdbb6683ab9e90419cd5a6f8294d3 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Mon, 30 Jun 2008 14:25:24 -0400 Subject: [ARM] Orion: add RD88F5181L-GE support This patch adds support for the Marvell Orion-VoIP RD2-88F5181L-GE Reference Design, and enables use of the ethernet, USB, Cardbus and mini-PCIe ports. Signed-off-by: Lennert Buytenhek --- arch/arm/mach-orion5x/Kconfig | 6 + arch/arm/mach-orion5x/Makefile | 1 + arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 172 ++++++++++++++++++++++++++++ 3 files changed, 179 insertions(+) create mode 100644 arch/arm/mach-orion5x/rd88f5181l-ge-setup.c diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 99b35b718b8c..709e901b9f88 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -80,6 +80,12 @@ config MACH_WNR854T Say 'Y' here if you want your kernel to support the Netgear WNR854T platform. +config MACH_RD88F5181L_GE + bool "Marvell Orion-VoIP GE Reference Design" + help + Say 'Y' here if you want your kernel to support the + Marvell Orion-VoIP GE (88F5181L) RD. + endmenu endif diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 26a62ede37ae..ec8374a913bf 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o obj-$(CONFIG_MACH_MSS2) += mss2-setup.o obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o +obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c new file mode 100644 index 000000000000..b56447d32e17 --- /dev/null +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -0,0 +1,172 @@ +/* + * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c + * + * Marvell Orion-VoIP GE Reference Design Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * RD-88F5181L GE Info + ****************************************************************************/ +/* + * 16M NOR flash Device bus boot chip select + */ +#define RD88F5181L_GE_NOR_BOOT_BASE 0xff000000 +#define RD88F5181L_GE_NOR_BOOT_SIZE SZ_16M + + +/***************************************************************************** + * 16M NOR Flash on Device bus Boot chip select + ****************************************************************************/ +static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = { + .width = 1, +}; + +static struct resource rd88f5181l_ge_nor_boot_flash_resource = { + .flags = IORESOURCE_MEM, + .start = RD88F5181L_GE_NOR_BOOT_BASE, + .end = RD88F5181L_GE_NOR_BOOT_BASE + + RD88F5181L_GE_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device rd88f5181l_ge_nor_boot_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &rd88f5181l_ge_nor_boot_flash_data, + }, + .num_resources = 1, + .resource = &rd88f5181l_ge_nor_boot_flash_resource, +}; + + +/***************************************************************************** + * General Setup + ****************************************************************************/ +static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = { + { 0, MPP_GPIO }, /* LED1 */ + { 1, MPP_GPIO }, /* LED5 */ + { 2, MPP_GPIO }, /* LED4 */ + { 3, MPP_GPIO }, /* LED3 */ + { 4, MPP_GPIO }, /* PCI_intA */ + { 5, MPP_GPIO }, /* RTC interrupt */ + { 6, MPP_PCI_CLK }, /* CPU PCI refclk */ + { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */ + { 8, MPP_GPIO }, /* 88e6131 interrupt */ + { 9, MPP_GPIO }, /* GE_RXERR */ + { 10, MPP_GPIO }, /* PCI_intB */ + { 11, MPP_GPIO }, /* LED2 */ + { 12, MPP_GIGE }, /* GE_TXD[4] */ + { 13, MPP_GIGE }, /* GE_TXD[5] */ + { 14, MPP_GIGE }, /* GE_TXD[6] */ + { 15, MPP_GIGE }, /* GE_TXD[7] */ + { 16, MPP_GIGE }, /* GE_RXD[4] */ + { 17, MPP_GIGE }, /* GE_RXD[5] */ + { 18, MPP_GIGE }, /* GE_RXD[6] */ + { 19, MPP_GIGE }, /* GE_RXD[7] */ + { -1 }, +}; + +static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = { + .phy_addr = -1, +}; + +static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = { + I2C_BOARD_INFO("ds1338", 0x68), +}; + +static void __init rd88f5181l_ge_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + orion5x_mpp_conf(rd88f5181l_ge_mpp_modes); + + /* + * Configure peripherals. + */ + orion5x_ehci0_init(); + orion5x_eth_init(&rd88f5181l_ge_eth_data); + orion5x_i2c_init(); + orion5x_uart0_init(); + + orion5x_setup_dev_boot_win(RD88F5181L_GE_NOR_BOOT_BASE, + RD88F5181L_GE_NOR_BOOT_SIZE); + platform_device_register(&rd88f5181l_ge_nor_boot_flash); + + i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1); +} + +static int __init +rd88f5181l_ge_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + /* + * Cardbus slot. + */ + if (pin == 1) + return gpio_to_irq(4); + else + return gpio_to_irq(10); +} + +static struct hw_pci rd88f5181l_ge_pci __initdata = { + .nr_controllers = 2, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = rd88f5181l_ge_pci_map_irq, +}; + +static int __init rd88f5181l_ge_pci_init(void) +{ + if (machine_is_rd88f5181l_ge()) { + orion5x_pci_set_cardbus_mode(); + pci_common_init(&rd88f5181l_ge_pci); + } + + return 0; +} +subsys_initcall(rd88f5181l_ge_pci_init); + +MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design") + /* Maintainer: Lennert Buytenhek */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = rd88f5181l_ge_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END -- cgit v1.2.3 From 6b5cdf0f6d4dc3d98de20d6b0abe8500046f1cb1 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 27 Jun 2008 18:56:22 -0400 Subject: [ARM] Orion: add RD88F5181L-FXO support This patch adds support for the Marvell Orion-VoIP RD-88F5181L-FXO Reference Design, and enables use of the ethernet, USB, Cardbus and mini-PCIe ports. Signed-off-by: Nicolas Pitre --- arch/arm/mach-orion5x/Kconfig | 6 + arch/arm/mach-orion5x/Makefile | 1 + arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 161 +++++++++++++++++++++++++++ 3 files changed, 168 insertions(+) create mode 100644 arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 709e901b9f88..ddcd41b15d17 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -86,6 +86,12 @@ config MACH_RD88F5181L_GE Say 'Y' here if you want your kernel to support the Marvell Orion-VoIP GE (88F5181L) RD. +config MACH_RD88F5181L_FXO + bool "Marvell Orion-VoIP FXO Reference Design" + help + Say 'Y' here if you want your kernel to support the + Marvell Orion-VoIP FXO (88F5181L) RD. + endmenu endif diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index ec8374a913bf..fcc48a8864f3 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o obj-$(CONFIG_MACH_MSS2) += mss2-setup.o obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o +obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c new file mode 100644 index 000000000000..d50e3650a09e --- /dev/null +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -0,0 +1,161 @@ +/* + * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c + * + * Marvell Orion-VoIP FXO Reference Design Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "mpp.h" + +/***************************************************************************** + * RD-88F5181L FXO Info + ****************************************************************************/ +/* + * 8M NOR flash Device bus boot chip select + */ +#define RD88F5181L_FXO_NOR_BOOT_BASE 0xff800000 +#define RD88F5181L_FXO_NOR_BOOT_SIZE SZ_8M + + +/***************************************************************************** + * 8M NOR Flash on Device bus Boot chip select + ****************************************************************************/ +static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = { + .width = 1, +}; + +static struct resource rd88f5181l_fxo_nor_boot_flash_resource = { + .flags = IORESOURCE_MEM, + .start = RD88F5181L_FXO_NOR_BOOT_BASE, + .end = RD88F5181L_FXO_NOR_BOOT_BASE + + RD88F5181L_FXO_NOR_BOOT_SIZE - 1, +}; + +static struct platform_device rd88f5181l_fxo_nor_boot_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &rd88f5181l_fxo_nor_boot_flash_data, + }, + .num_resources = 1, + .resource = &rd88f5181l_fxo_nor_boot_flash_resource, +}; + + +/***************************************************************************** + * General Setup + ****************************************************************************/ +static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = { + { 0, MPP_GPIO }, /* LED1 CardBus LED (front panel) */ + { 1, MPP_GPIO }, /* PCI_intA */ + { 2, MPP_GPIO }, /* Hard Reset / Factory Init*/ + { 3, MPP_GPIO }, /* FXS or DAA select */ + { 4, MPP_GPIO }, /* LED6 - phone LED (front panel) */ + { 5, MPP_GPIO }, /* LED5 - phone LED (front panel) */ + { 6, MPP_PCI_CLK }, /* CPU PCI refclk */ + { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */ + { 8, MPP_GPIO }, /* CardBus reset */ + { 9, MPP_GPIO }, /* GE_RXERR */ + { 10, MPP_GPIO }, /* LED2 MiniPCI LED (front panel) */ + { 11, MPP_GPIO }, /* Lifeline control */ + { 12, MPP_GIGE }, /* GE_TXD[4] */ + { 13, MPP_GIGE }, /* GE_TXD[5] */ + { 14, MPP_GIGE }, /* GE_TXD[6] */ + { 15, MPP_GIGE }, /* GE_TXD[7] */ + { 16, MPP_GIGE }, /* GE_RXD[4] */ + { 17, MPP_GIGE }, /* GE_RXD[5] */ + { 18, MPP_GIGE }, /* GE_RXD[6] */ + { 19, MPP_GIGE }, /* GE_RXD[7] */ + { -1 }, +}; + +static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = { + .phy_addr = -1, +}; + +static void __init rd88f5181l_fxo_init(void) +{ + /* + * Setup basic Orion functions. Need to be called early. + */ + orion5x_init(); + + orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes); + + /* + * Configure peripherals. + */ + orion5x_ehci0_init(); + orion5x_eth_init(&rd88f5181l_fxo_eth_data); + orion5x_uart0_init(); + + orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE, + RD88F5181L_FXO_NOR_BOOT_SIZE); + platform_device_register(&rd88f5181l_fxo_nor_boot_flash); +} + +static int __init +rd88f5181l_fxo_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + /* + * Mini-PCI / Cardbus slot. + */ + return gpio_to_irq(1); +} + +static struct hw_pci rd88f5181l_fxo_pci __initdata = { + .nr_controllers = 2, + .swizzle = pci_std_swizzle, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = rd88f5181l_fxo_pci_map_irq, +}; + +static int __init rd88f5181l_fxo_pci_init(void) +{ + if (machine_is_rd88f5181l_fxo()) { + orion5x_pci_set_cardbus_mode(); + pci_common_init(&rd88f5181l_fxo_pci); + } + + return 0; +} +subsys_initcall(rd88f5181l_fxo_pci_init); + +MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design") + /* Maintainer: Nicolas Pitre */ + .phys_io = ORION5X_REGS_PHYS_BASE, + .io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC, + .boot_params = 0x00000100, + .init_machine = rd88f5181l_fxo_init, + .map_io = orion5x_map_io, + .init_irq = orion5x_init_irq, + .timer = &orion5x_timer, + .fixup = tag_fixup_mem32, +MACHINE_END -- cgit v1.2.3 From 2e1117d307dba8185a72bac94e57f057e70590ca Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Mon, 7 Jul 2008 21:23:09 +0300 Subject: [ARM] Orion: LED support for HP mv2120 The HP mv2120 has several LEDs that are controlled through gpio. Export the health LED, the red SATA LEDs as well as two gpios that control the brightness of _all_ LEDs to userland. The Ethernet and power LEDs can't be controlled through gpio and the blue SATA LEDs are handled via the SATA driver. Signed-off-by: Martin Michlmayr Signed-off-by: Nicolas Pitre --- arch/arm/configs/orion5x_defconfig | 4 ++-- arch/arm/mach-orion5x/mv2120-setup.c | 45 ++++++++++++++++++++++++++++++++++++ 2 files changed, 47 insertions(+), 2 deletions(-) diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 8a7cabfae574..9578b5d9f9c7 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1077,7 +1077,7 @@ CONFIG_LEDS_CLASS=y # # LED drivers # -# CONFIG_LEDS_GPIO is not set +CONFIG_LEDS_GPIO=y # # LED Triggers @@ -1085,7 +1085,7 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y -# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index f1dcad36b13c..55f3b0fdef8b 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -137,6 +137,50 @@ static struct i2c_board_info __initdata mv2120_i2c_rtc = { .irq = 0, }; +static struct gpio_led mv2120_led_pins[] = { + { + .name = "mv2120:blue:health", + .gpio = 0, + }, + { + .name = "mv2120:red:health", + .gpio = 1, + }, + { + .name = "mv2120:led:bright", + .gpio = 4, + .default_trigger = "default-on", + }, + { + .name = "mv2120:led:dimmed", + .gpio = 5, + }, + { + .name = "mv2120:red:sata0", + .gpio = 8, + .active_low = 1, + }, + { + .name = "mv2120:red:sata1", + .gpio = 9, + .active_low = 1, + }, + +}; + +static struct gpio_led_platform_data mv2120_led_data = { + .leds = mv2120_led_pins, + .num_leds = ARRAY_SIZE(mv2120_led_pins), +}; + +static struct platform_device mv2120_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &mv2120_led_data, + } +}; + static void mv2120_power_off(void) { pr_info("%s: triggering power-off...\n", __func__); @@ -172,6 +216,7 @@ static void __init mv2120_init(void) gpio_free(MV2120_GPIO_RTC_IRQ); } i2c_register_board_info(0, &mv2120_i2c_rtc, 1); + platform_device_register(&mv2120_leds); /* register mv2120 specific power-off method */ if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 || -- cgit v1.2.3 From 188237e28d7fece0471640ba86f6d8cd164ed085 Mon Sep 17 00:00:00 2001 From: Saeed Bishara Date: Wed, 2 Jul 2008 06:06:32 -1100 Subject: [ARM] Feroceon: don't disable BPU on boot On Feroceon platforms that have a branch prediction unit, bit 11 of the cp15 control register controls the BPU. This patch keeps the old value of this bit instead of always clearing it. Signed-off-by: Saeed Bishara Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mm/proc-feroceon.S | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index 63ca1ea5c267..f2e5884c513a 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -493,14 +493,15 @@ __feroceon_setup: .size __feroceon_setup, . - __feroceon_setup /* - * R - * .RVI ZFRS BLDP WCAM - * .011 0001 ..11 0101 + * B + * R P + * .RVI UFRS BLDP WCAM + * .011 .001 ..11 0101 * */ .type feroceon_crval, #object feroceon_crval: - crval clear=0x00007f3f, mmuset=0x00003135, ucset=0x00001134 + crval clear=0x0000773f, mmuset=0x00003135, ucset=0x00001134 __INITDATA -- cgit v1.2.3 From c6c4f070a61b2b6e5cd317a5fbf25255878688a2 Mon Sep 17 00:00:00 2001 From: Greg KH Date: Thu, 3 Jul 2008 09:49:39 -0700 Subject: PCI: make pci_name use dev_name Also fixes up the sparc code that was assuming this is not a constant. Acked-by: David S. Miller Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jesse Barnes --- arch/sparc64/kernel/pci.c | 2 +- include/linux/pci.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index 112b09f16f36..d00a3656c287 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -408,7 +408,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, dev->class = class >> 8; dev->revision = class & 0xff; - sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), + sprintf(dev->dev.bus_id, "%04x:%02x:%02x.%d", pci_domain_nr(bus), dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); if (ofpci_verbose) diff --git a/include/linux/pci.h b/include/linux/pci.h index 96ebaa8d80e3..4c80dc3f2990 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -996,9 +996,9 @@ static inline void pci_set_drvdata(struct pci_dev *pdev, void *data) /* If you want to know what to call your pci_dev, ask this function. * Again, it's a wrapper around the generic device. */ -static inline char *pci_name(struct pci_dev *pdev) +static inline const char *pci_name(struct pci_dev *pdev) { - return pdev->dev.bus_id; + return dev_name(&pdev->dev); } -- cgit v1.2.3 From 3737b2b1046900660b42e25c904b85e78139d25b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:30:55 +0200 Subject: ACPI: Introduce acpi_bus_power_manageable function Introduce function acpi_bus_power_manageable() allowing other (dependent) subsystems to check if ACPI is able to power manage given device. This may be useful, for example, for PCI device power management. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Jesse Barnes --- drivers/acpi/bus.c | 11 +++++++++++ include/acpi/acpi_bus.h | 1 + 2 files changed, 12 insertions(+) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index a6dbcf4d9ef5..b9b69d9629b5 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -295,6 +295,17 @@ int acpi_bus_set_power(acpi_handle handle, int state) EXPORT_SYMBOL(acpi_bus_set_power); +bool acpi_bus_power_manageable(acpi_handle handle) +{ + struct acpi_device *device; + int result; + + result = acpi_bus_get_device(handle, &device); + return result ? false : device->flags.power_manageable; +} + +EXPORT_SYMBOL(acpi_bus_power_manageable); + /* -------------------------------------------------------------------------- Event Management -------------------------------------------------------------------------- */ diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index db90a74f8714..0c21ea3bb672 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -335,6 +335,7 @@ void acpi_bus_data_handler(acpi_handle handle, u32 function, void *context); int acpi_bus_get_status(struct acpi_device *device); int acpi_bus_get_power(acpi_handle handle, int *state); int acpi_bus_set_power(acpi_handle handle, int state); +bool acpi_bus_power_manageable(acpi_handle handle); #ifdef CONFIG_ACPI_PROC_EVENT int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data); int acpi_bus_generate_proc_event4(const char *class, const char *bid, u8 type, int data); -- cgit v1.2.3 From 961d9120fa6f078492a1c762dd91f2c097e56c83 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:32:02 +0200 Subject: PCI: Introduce platform_pci_power_manageable function Introduce function pointer platform_pci_power_manageable to be used by the platform-related code to point to a function allowing us to check if given device is power manageable by the platform. Introduce acpi_pci_power_manageable() playing that role for ACPI. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 19 +++++++++++++------ drivers/pci/pci.c | 40 ++++++++++++++++++++++++++++++---------- drivers/pci/pci.h | 26 ++++++++++++++++++++++---- 3 files changed, 65 insertions(+), 20 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 056ea80ee27a..e4df71ab79b3 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -215,7 +215,6 @@ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) } EXPORT_SYMBOL(pci_osc_control_set); -#ifdef CONFIG_ACPI_SLEEP /* * _SxD returns the D-state with the highest power * (lowest D-state number) supported in the S-state "x". @@ -259,7 +258,13 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) } return PCI_POWER_ERROR; } -#endif + +static bool acpi_pci_power_manageable(struct pci_dev *dev) +{ + acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev); + + return handle ? acpi_bus_power_manageable(handle) : false; +} static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) { @@ -290,6 +295,11 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) return -EINVAL; } +static struct pci_platform_pm_ops acpi_pci_platform_pm = { + .is_manageable = acpi_pci_power_manageable, + .set_state = acpi_pci_set_power_state, + .choose_state = acpi_pci_choose_state, +}; /* ACPI bus type */ static int acpi_pci_find_device(struct device *dev, acpi_handle *handle) @@ -341,10 +351,7 @@ static int __init acpi_pci_init(void) ret = register_acpi_bus_type(&acpi_pci_bus); if (ret) return 0; -#ifdef CONFIG_ACPI_SLEEP - platform_pci_choose_state = acpi_pci_choose_state; -#endif - platform_pci_set_power_state = acpi_pci_set_power_state; + pci_set_platform_pm(&acpi_pci_platform_pm); return 0; } arch_initcall(acpi_pci_init); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 8e8ecc1da93d..f8074525267c 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -376,7 +376,32 @@ pci_restore_bars(struct pci_dev *dev) pci_update_resource(dev, &dev->resource[i], i); } -int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t); +static struct pci_platform_pm_ops *pci_platform_pm; + +int pci_set_platform_pm(struct pci_platform_pm_ops *ops) +{ + if (!ops->is_manageable || !ops->set_state || !ops->choose_state) + return -EINVAL; + pci_platform_pm = ops; + return 0; +} + +static inline bool platform_pci_power_manageable(struct pci_dev *dev) +{ + return pci_platform_pm ? pci_platform_pm->is_manageable(dev) : false; +} + +static inline int platform_pci_set_power_state(struct pci_dev *dev, + pci_power_t t) +{ + return pci_platform_pm ? pci_platform_pm->set_state(dev, t) : -ENOSYS; +} + +static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev) +{ + return pci_platform_pm ? + pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR; +} /** * pci_set_power_state - Set the power state of a PCI device @@ -479,8 +504,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) * Give firmware a chance to be called, such as ACPI _PRx, _PSx * Firmware method after native method ? */ - if (platform_pci_set_power_state) - platform_pci_set_power_state(dev, state); + platform_pci_set_power_state(dev, state); dev->current_state = state; @@ -505,8 +529,6 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; } -pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev); - /** * pci_choose_state - Choose the power state of a PCI device * @dev: PCI device to be suspended @@ -524,11 +546,9 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) if (!pci_find_capability(dev, PCI_CAP_ID_PM)) return PCI_D0; - if (platform_pci_choose_state) { - ret = platform_pci_choose_state(dev); - if (ret != PCI_POWER_ERROR) - return ret; - } + ret = platform_pci_choose_state(dev); + if (ret != PCI_POWER_ERROR) + return ret; switch (state.event) { case PM_EVENT_ON: diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index e0eff35825a6..0cd2e719933b 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -5,10 +5,28 @@ extern int pci_create_sysfs_dev_files(struct pci_dev *pdev); extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev); extern void pci_cleanup_rom(struct pci_dev *dev); -/* Firmware callbacks */ -extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev); -extern int (*platform_pci_set_power_state)(struct pci_dev *dev, - pci_power_t state); +/** + * Firmware PM callbacks + * + * @is_manageable - returns 'true' if given device is power manageable by the + * platform firmware + * + * @set_state - invokes the platform firmware to set the device's power state + * + * @choose_state - returns PCI power state of given device preferred by the + * platform; to be used during system-wide transitions from a + * sleeping state to the working state and vice versa + * + * If given platform is generally capable of power managing PCI devices, all of + * these callbacks are mandatory. + */ +struct pci_platform_pm_ops { + bool (*is_manageable)(struct pci_dev *dev); + int (*set_state)(struct pci_dev *dev, pci_power_t state); + pci_power_t (*choose_state)(struct pci_dev *dev); +}; + +extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops); extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val); -- cgit v1.2.3 From 44e4e66eeae5338b3ca0b28f8352e60bf18d5ba8 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:32:52 +0200 Subject: PCI: rework pci_set_power_state function to call platform first Rework pci_set_power_state() so that the platform callback is invoked before the native mechanism, if necessary. Also, make the function check if the device is power manageable by the platform before invoking the platform callback. This may matter if the device dependent on additional power resources controlled by the platform is being put into D0, in which case those power resources must be turned on before we attempt to handle the device itself. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Jesse Barnes --- drivers/pci/pci-acpi.c | 16 ++++-- drivers/pci/pci.c | 150 ++++++++++++++++++++++++++++++++++--------------- 2 files changed, 114 insertions(+), 52 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index e4df71ab79b3..6bc0d8c870af 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -277,12 +277,11 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) [PCI_D3hot] = ACPI_STATE_D3, [PCI_D3cold] = ACPI_STATE_D3 }; + int error = -EINVAL; - if (!handle) - return -ENODEV; /* If the ACPI device has _EJ0, ignore the device */ - if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp))) - return 0; + if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp))) + return -ENODEV; switch (state) { case PCI_D0: @@ -290,9 +289,14 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) case PCI_D2: case PCI_D3hot: case PCI_D3cold: - return acpi_bus_set_power(handle, state_conv[state]); + error = acpi_bus_set_power(handle, state_conv[state]); } - return -EINVAL; + + if (!error) + dev_printk(KERN_INFO, &dev->dev, + "power state changed by ACPI to D%d\n", state); + + return error; } static struct pci_platform_pm_ops acpi_pci_platform_pm = { diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index f8074525267c..20e28077b96d 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -404,67 +404,56 @@ static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev) } /** - * pci_set_power_state - Set the power state of a PCI device - * @dev: PCI device to be suspended - * @state: PCI power state (D0, D1, D2, D3hot, D3cold) we're entering + * pci_raw_set_power_state - Use PCI PM registers to set the power state of + * given PCI device + * @dev: PCI device to handle. + * @pm: PCI PM capability offset of the device. + * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. * - * Transition a device to a new power state, using the Power Management - * Capabilities in the device's config space. - * - * RETURN VALUE: - * -EINVAL if trying to enter a lower state than we're already in. - * 0 if we're already in the requested state. - * -EIO if device does not support PCI PM. - * 0 if we can successfully change the power state. + * RETURN VALUE: + * -EINVAL if the requested state is invalid. + * -EIO if device does not support PCI PM or its PM capabilities register has a + * wrong version, or device doesn't support the requested state. + * 0 if device already is in the requested state. + * 0 if device's power state has been successfully changed. */ -int -pci_set_power_state(struct pci_dev *dev, pci_power_t state) +static int +pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) { - int pm, need_restore = 0; u16 pmcsr, pmc; + bool need_restore = false; - /* bound the state we're entering */ - if (state > PCI_D3hot) - state = PCI_D3hot; - - /* - * If the device or the parent bridge can't support PCI PM, ignore - * the request if we're doing anything besides putting it into D0 - * (which would only happen on boot). - */ - if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev)) - return 0; - - /* find PCI PM capability in list */ - pm = pci_find_capability(dev, PCI_CAP_ID_PM); - - /* abort if the device doesn't support PM capabilities */ if (!pm) return -EIO; + if (state < PCI_D0 || state > PCI_D3hot) + return -EINVAL; + /* Validate current state: * Can enter D0 from any state, but if we can only go deeper * to sleep if we're already in a low power state */ - if (state != PCI_D0 && dev->current_state > state) { + if (dev->current_state == state) { + /* we're already there */ + return 0; + } else if (state != PCI_D0 && dev->current_state <= PCI_D3cold + && dev->current_state > state) { dev_err(&dev->dev, "invalid power transition " "(from state %d to %d)\n", dev->current_state, state); return -EINVAL; - } else if (dev->current_state == state) - return 0; /* we're already there */ + } + pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc); if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { - dev_printk(KERN_DEBUG, &dev->dev, "unsupported PM cap regs " - "version (%u)\n", pmc & PCI_PM_CAP_VER_MASK); + dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n", + pmc & PCI_PM_CAP_VER_MASK); return -EIO; } /* check if this device supports the desired state */ - if (state == PCI_D1 && !(pmc & PCI_PM_CAP_D1)) - return -EIO; - else if (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2)) + if ((state == PCI_D1 && !(pmc & PCI_PM_CAP_D1)) + || (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))) return -EIO; pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); @@ -483,7 +472,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) case PCI_UNKNOWN: /* Boot-up */ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) - need_restore = 1; + need_restore = true; /* Fall-through: force to D0 */ default: pmcsr = 0; @@ -500,12 +489,6 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) else if (state == PCI_D2 || dev->current_state == PCI_D2) udelay(200); - /* - * Give firmware a chance to be called, such as ACPI _PRx, _PSx - * Firmware method after native method ? - */ - platform_pci_set_power_state(dev, state); - dev->current_state = state; /* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT @@ -529,6 +512,81 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; } +/** + * pci_update_current_state - Read PCI power state of given device from its + * PCI PM registers and cache it + * @dev: PCI device to handle. + * @pm: PCI PM capability offset of the device. + */ +static void pci_update_current_state(struct pci_dev *dev, int pm) +{ + if (pm) { + u16 pmcsr; + + pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); + } +} + +/** + * pci_set_power_state - Set the power state of a PCI device + * @dev: PCI device to handle. + * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. + * + * Transition a device to a new power state, using the platform formware and/or + * the device's PCI PM registers. + * + * RETURN VALUE: + * -EINVAL if the requested state is invalid. + * -EIO if device does not support PCI PM or its PM capabilities register has a + * wrong version, or device doesn't support the requested state. + * 0 if device already is in the requested state. + * 0 if device's power state has been successfully changed. + */ +int pci_set_power_state(struct pci_dev *dev, pci_power_t state) +{ + int pm, error; + + /* bound the state we're entering */ + if (state > PCI_D3hot) + state = PCI_D3hot; + else if (state < PCI_D0) + state = PCI_D0; + else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev)) + /* + * If the device or the parent bridge do not support PCI PM, + * ignore the request if we're doing anything other than putting + * it into D0 (which would only happen on boot). + */ + return 0; + + /* Find PCI PM capability in the list */ + pm = pci_find_capability(dev, PCI_CAP_ID_PM); + + if (state == PCI_D0 && platform_pci_power_manageable(dev)) { + /* + * Allow the platform to change the state, for example via ACPI + * _PR0, _PS0 and some such, but do not trust it. + */ + int ret = platform_pci_set_power_state(dev, PCI_D0); + if (!ret) + pci_update_current_state(dev, pm); + } + + error = pci_raw_set_power_state(dev, pm, state); + + if (state > PCI_D0 && platform_pci_power_manageable(dev)) { + /* Allow the platform to finalize the transition */ + int ret = platform_pci_set_power_state(dev, state); + if (!ret) { + pci_update_current_state(dev, pm); + error = 0; + } + } + + return error; +} + /** * pci_choose_state - Choose the power state of a PCI device * @dev: PCI device to be suspended -- cgit v1.2.3 From 77e766099efc29d8b01db4b8244ff64fa3d3d0ca Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:33:34 +0200 Subject: ACPI: Introduce acpi_device_sleep_wake function The currect ACPI code attempts to execute _PSW at three different places and in one of them only it tries to execute _DSW before _PSW, which is inconsistent with the other two cases. Move the execution of _DSW and _PSW into a separate function called acpi_device_sleep_wake() and call it wherever appropriate instead of executing _DSW and/or _PSW directly. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Jesse Barnes --- drivers/acpi/power.c | 118 ++++++++++++++++++++++++++++++-------------- drivers/acpi/scan.c | 42 +++------------- drivers/acpi/sleep/wakeup.c | 2 +- include/acpi/acpi_drivers.h | 4 +- 4 files changed, 92 insertions(+), 74 deletions(-) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 81e4f081a4ae..2e959aa1ef0e 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -292,69 +292,115 @@ static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev) return 0; } +/** + * acpi_device_sleep_wake - execute _DSW (Device Sleep Wake) or (deprecated in + * ACPI 3.0) _PSW (Power State Wake) + * @dev: Device to handle. + * @enable: 0 - disable, 1 - enable the wake capabilities of the device. + * @sleep_state: Target sleep state of the system. + * @dev_state: Target power state of the device. + * + * Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power + * State Wake) for the device, if present. On failure reset the device's + * wakeup.flags.valid flag. + * + * RETURN VALUE: + * 0 if either _DSW or _PSW has been successfully executed + * 0 if neither _DSW nor _PSW has been found + * -ENODEV if the execution of either _DSW or _PSW has failed + */ +int acpi_device_sleep_wake(struct acpi_device *dev, + int enable, int sleep_state, int dev_state) +{ + union acpi_object in_arg[3]; + struct acpi_object_list arg_list = { 3, in_arg }; + acpi_status status = AE_OK; + + /* + * Try to execute _DSW first. + * + * Three agruments are needed for the _DSW object: + * Argument 0: enable/disable the wake capabilities + * Argument 1: target system state + * Argument 2: target device state + * When _DSW object is called to disable the wake capabilities, maybe + * the first argument is filled. The values of the other two agruments + * are meaningless. + */ + in_arg[0].type = ACPI_TYPE_INTEGER; + in_arg[0].integer.value = enable; + in_arg[1].type = ACPI_TYPE_INTEGER; + in_arg[1].integer.value = sleep_state; + in_arg[2].type = ACPI_TYPE_INTEGER; + in_arg[2].integer.value = dev_state; + status = acpi_evaluate_object(dev->handle, "_DSW", &arg_list, NULL); + if (ACPI_SUCCESS(status)) { + return 0; + } else if (status != AE_NOT_FOUND) { + printk(KERN_ERR PREFIX "_DSW execution failed\n"); + dev->wakeup.flags.valid = 0; + return -ENODEV; + } + + /* Execute _PSW */ + arg_list.count = 1; + in_arg[0].integer.value = enable; + status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL); + if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { + printk(KERN_ERR PREFIX "_PSW execution failed\n"); + dev->wakeup.flags.valid = 0; + return -ENODEV; + } + + return 0; +} + /* * Prepare a wakeup device, two steps (Ref ACPI 2.0:P229): * 1. Power on the power resources required for the wakeup device - * 2. Enable _PSW (power state wake) for the device if present + * 2. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power + * State Wake) for the device, if present */ -int acpi_enable_wakeup_device_power(struct acpi_device *dev) +int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state) { - union acpi_object arg = { ACPI_TYPE_INTEGER }; - struct acpi_object_list arg_list = { 1, &arg }; - acpi_status status = AE_OK; int i; - int ret = 0; if (!dev || !dev->wakeup.flags.valid) - return -1; + return -EINVAL; - arg.integer.value = 1; /* Open power resource */ for (i = 0; i < dev->wakeup.resources.count; i++) { - ret = acpi_power_on(dev->wakeup.resources.handles[i], dev); + int ret = acpi_power_on(dev->wakeup.resources.handles[i], dev); if (ret) { printk(KERN_ERR PREFIX "Transition power state\n"); dev->wakeup.flags.valid = 0; - return -1; + return -ENODEV; } } - /* Execute PSW */ - status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL); - if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { - printk(KERN_ERR PREFIX "Evaluate _PSW\n"); - dev->wakeup.flags.valid = 0; - ret = -1; - } - - return ret; + /* + * Passing 3 as the third argument below means the device may be placed + * in arbitrary power state afterwards. + */ + return acpi_device_sleep_wake(dev, 1, sleep_state, 3); } /* * Shutdown a wakeup device, counterpart of above method - * 1. Disable _PSW (power state wake) + * 1. Execute _DSW (Device Sleep Wake) or (deprecated in ACPI 3.0) _PSW (Power + * State Wake) for the device, if present * 2. Shutdown down the power resources */ int acpi_disable_wakeup_device_power(struct acpi_device *dev) { - union acpi_object arg = { ACPI_TYPE_INTEGER }; - struct acpi_object_list arg_list = { 1, &arg }; - acpi_status status = AE_OK; - int i; - int ret = 0; - + int i, ret; if (!dev || !dev->wakeup.flags.valid) - return -1; + return -EINVAL; - arg.integer.value = 0; - /* Execute PSW */ - status = acpi_evaluate_object(dev->handle, "_PSW", &arg_list, NULL); - if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { - printk(KERN_ERR PREFIX "Evaluate _PSW\n"); - dev->wakeup.flags.valid = 0; - return -1; - } + ret = acpi_device_sleep_wake(dev, 0, 0, 0); + if (ret) + return ret; /* Close power resource */ for (i = 0; i < dev->wakeup.resources.count; i++) { @@ -362,7 +408,7 @@ int acpi_disable_wakeup_device_power(struct acpi_device *dev) if (ret) { printk(KERN_ERR PREFIX "Transition power state\n"); dev->wakeup.flags.valid = 0; - return -1; + return -ENODEV; } } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 6d85289f1c12..f276890cfde7 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -691,9 +691,7 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) acpi_status status = 0; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *package = NULL; - union acpi_object in_arg[3]; - struct acpi_object_list arg_list = { 3, in_arg }; - acpi_status psw_status = AE_OK; + int psw_error; struct acpi_device_id button_device_ids[] = { {"PNP0C0D", 0}, @@ -725,39 +723,11 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) * So it is necessary to call _DSW object first. Only when it is not * present will the _PSW object used. */ - /* - * Three agruments are needed for the _DSW object. - * Argument 0: enable/disable the wake capabilities - * When _DSW object is called to disable the wake capabilities, maybe - * the first argument is filled. The value of the other two agruments - * is meaningless. - */ - in_arg[0].type = ACPI_TYPE_INTEGER; - in_arg[0].integer.value = 0; - in_arg[1].type = ACPI_TYPE_INTEGER; - in_arg[1].integer.value = 0; - in_arg[2].type = ACPI_TYPE_INTEGER; - in_arg[2].integer.value = 0; - psw_status = acpi_evaluate_object(device->handle, "_DSW", - &arg_list, NULL); - if (ACPI_FAILURE(psw_status) && (psw_status != AE_NOT_FOUND)) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "error in evaluate _DSW\n")); - /* - * When the _DSW object is not present, OSPM will call _PSW object. - */ - if (psw_status == AE_NOT_FOUND) { - /* - * Only one agruments is required for the _PSW object. - * agrument 0: enable/disable the wake capabilities - */ - arg_list.count = 1; - in_arg[0].integer.value = 0; - psw_status = acpi_evaluate_object(device->handle, "_PSW", - &arg_list, NULL); - if (ACPI_FAILURE(psw_status) && (psw_status != AE_NOT_FOUND)) - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "error in " - "evaluate _PSW\n")); - } + psw_error = acpi_device_sleep_wake(device, 0, 0, 0); + if (psw_error) + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "error in _DSW or _PSW evaluation\n")); + /* Power button, Lid switch always enable wakeup */ if (!acpi_match_device_ids(device, button_device_ids)) device->wakeup.flags.run_wake = 1; diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c index ed8e41becf0c..7422a2213944 100644 --- a/drivers/acpi/sleep/wakeup.c +++ b/drivers/acpi/sleep/wakeup.c @@ -42,7 +42,7 @@ void acpi_enable_wakeup_device_prep(u8 sleep_state) continue; spin_unlock(&acpi_device_lock); - acpi_enable_wakeup_device_power(dev); + acpi_enable_wakeup_device_power(dev, sleep_state); spin_lock(&acpi_device_lock); } spin_unlock(&acpi_device_lock); diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index 9757a040a505..e5f38e5ce86f 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -87,7 +87,9 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_device *device, int domain, -------------------------------------------------------------------------- */ #ifdef CONFIG_ACPI_POWER -int acpi_enable_wakeup_device_power(struct acpi_device *dev); +int acpi_device_sleep_wake(struct acpi_device *dev, + int enable, int sleep_state, int dev_state); +int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state); int acpi_disable_wakeup_device_power(struct acpi_device *dev); int acpi_power_get_inferred_state(struct acpi_device *device); int acpi_power_transition(struct acpi_device *device, int state); -- cgit v1.2.3 From 0af4b8c4fb31193dc666f4893107a18fef82baab Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:34:11 +0200 Subject: ACPI: Introduce new device wakeup flag 'prepared' Introduce additional flag 'prepared' in struct acpi_device_wakeup_flags and use it to prevent devices from being enable/disabled do wake up the system multiple times in a row (this does not happen currently, but will be possible after some of the following patches). Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/acpi/power.c | 24 ++++++++++++++++++++++-- include/acpi/acpi_bus.h | 1 + 2 files changed, 23 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index 2e959aa1ef0e..4ab21cb1c8c7 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -363,11 +363,18 @@ int acpi_device_sleep_wake(struct acpi_device *dev, */ int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state) { - int i; + int i, err; if (!dev || !dev->wakeup.flags.valid) return -EINVAL; + /* + * Do not execute the code below twice in a row without calling + * acpi_disable_wakeup_device_power() in between for the same device + */ + if (dev->wakeup.flags.prepared) + return 0; + /* Open power resource */ for (i = 0; i < dev->wakeup.resources.count; i++) { int ret = acpi_power_on(dev->wakeup.resources.handles[i], dev); @@ -382,7 +389,11 @@ int acpi_enable_wakeup_device_power(struct acpi_device *dev, int sleep_state) * Passing 3 as the third argument below means the device may be placed * in arbitrary power state afterwards. */ - return acpi_device_sleep_wake(dev, 1, sleep_state, 3); + err = acpi_device_sleep_wake(dev, 1, sleep_state, 3); + if (!err) + dev->wakeup.flags.prepared = 1; + + return err; } /* @@ -398,6 +409,15 @@ int acpi_disable_wakeup_device_power(struct acpi_device *dev) if (!dev || !dev->wakeup.flags.valid) return -EINVAL; + /* + * Do not execute the code below twice in a row without calling + * acpi_enable_wakeup_device_power() in between for the same device + */ + if (!dev->wakeup.flags.prepared) + return 0; + + dev->wakeup.flags.prepared = 0; + ret = acpi_device_sleep_wake(dev, 0, 0, 0); if (ret) return ret; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 0c21ea3bb672..071daf8db600 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -259,6 +259,7 @@ struct acpi_device_perf { /* Wakeup Management */ struct acpi_device_wakeup_flags { u8 valid:1; /* Can successfully enable wakeup? */ + u8 prepared:1; /* Has the wake-up capability been enabled? */ u8 run_wake:1; /* Run-Wake GPE devices */ }; -- cgit v1.2.3 From eb9d0fe40e313c0a74115ef456a2e43a6c8da72f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:34:48 +0200 Subject: PCI ACPI: Rework PCI handling of wake-up * Introduce function acpi_pm_device_sleep_wake() for enabling and disabling the system wake-up capability of devices that are power manageable by ACPI. * Introduce function acpi_bus_can_wakeup() allowing other (dependent) subsystems to check if ACPI is able to enable the system wake-up capability of given device. * Introduce callback .sleep_wake() in struct pci_platform_pm_ops and for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake(). * Introduce callback .can_wakeup() in struct pci_platform_pm_ops and for the ACPI 'driver' make it use acpi_bus_can_wakeup(). * Move the PME# handlig code out of pci_enable_wake() and split it into two functions, pci_pme_capable() and pci_pme_active(), allowing the caller to check if given device is capable of generating PME# from given power state and to enable/disable the device's PME# functionality, respectively. * Modify pci_enable_wake() to use the new ACPI callbacks and the new PME#-related functions. * Drop the generic .platform_enable_wakeup() callback that is not used any more. * Introduce device_set_wakeup_capable() that will set the power.can_wakeup flag of given device. * Rework PCI device PM initialization so that, if given device is capable of generating wake-up events, either natively through the PME# mechanism, or with the help of the platform, its power.can_wakeup flag is set and its power.should_wakeup flag is unset as appropriate. * Make ACPI set the power.can_wakeup flag for devices found to be wake-up capable by it. * Make the ACPI wake-up code enable/disable GPEs for devices that have the wakeup.flags.prepared flag set (which means that their wake-up power has been enabled). Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/acpi/bus.c | 11 +++ drivers/acpi/glue.c | 2 + drivers/acpi/sleep/main.c | 25 +++++++ drivers/acpi/sleep/wakeup.c | 11 +-- drivers/base/power/sysfs.c | 3 - drivers/pci/pci-acpi.c | 20 ++++++ drivers/pci/pci.c | 169 ++++++++++++++++++++++++++++++++------------ drivers/pci/pci.h | 8 +++ drivers/pci/probe.c | 47 +----------- include/acpi/acpi_bus.h | 2 + include/linux/pm_wakeup.h | 26 ++----- 11 files changed, 208 insertions(+), 116 deletions(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index b9b69d9629b5..fc1110d6a078 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -306,6 +306,17 @@ bool acpi_bus_power_manageable(acpi_handle handle) EXPORT_SYMBOL(acpi_bus_power_manageable); +bool acpi_bus_can_wakeup(acpi_handle handle) +{ + struct acpi_device *device; + int result; + + result = acpi_bus_get_device(handle, &device); + return result ? false : device->wakeup.flags.valid; +} + +EXPORT_SYMBOL(acpi_bus_can_wakeup); + /* -------------------------------------------------------------------------- Event Management -------------------------------------------------------------------------- */ diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 06f8634fe58b..87c5d456e180 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -166,6 +166,8 @@ static int acpi_bind_one(struct device *dev, acpi_handle handle) "firmware_node"); ret = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj, "physical_node"); + if (acpi_dev->wakeup.flags.valid) + device_set_wakeup_capable(dev, true); } return 0; diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 4addf8ad50ae..af7f4663deaa 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -468,6 +468,31 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) *d_min_p = d_min; return d_max; } + +/** + * acpi_pm_device_sleep_wake - enable or disable the system wake-up + * capability of given device + * @dev: device to handle + * @enable: 'true' - enable, 'false' - disable the wake-up capability + */ +int acpi_pm_device_sleep_wake(struct device *dev, bool enable) +{ + acpi_handle handle; + struct acpi_device *adev; + + if (!device_may_wakeup(dev)) + return -EINVAL; + + handle = DEVICE_ACPI_HANDLE(dev); + if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) { + printk(KERN_DEBUG "ACPI handle has no context!\n"); + return -ENODEV; + } + + return enable ? + acpi_enable_wakeup_device_power(adev, acpi_target_sleep_state) : + acpi_disable_wakeup_device_power(adev); +} #endif static void acpi_power_off_prepare(void) diff --git a/drivers/acpi/sleep/wakeup.c b/drivers/acpi/sleep/wakeup.c index 7422a2213944..38655eb132dc 100644 --- a/drivers/acpi/sleep/wakeup.c +++ b/drivers/acpi/sleep/wakeup.c @@ -66,13 +66,15 @@ void acpi_enable_wakeup_device(u8 sleep_state) list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); + if (!dev->wakeup.flags.valid) continue; + /* If users want to disable run-wake GPE, * we only disable it for wake and leave it for runtime */ - if (!dev->wakeup.state.enabled || - sleep_state > (u32) dev->wakeup.sleep_state) { + if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared) + || sleep_state > (u32) dev->wakeup.sleep_state) { if (dev->wakeup.flags.run_wake) { spin_unlock(&acpi_device_lock); /* set_gpe_type will disable GPE, leave it like that */ @@ -110,8 +112,9 @@ void acpi_disable_wakeup_device(u8 sleep_state) if (!dev->wakeup.flags.valid) continue; - if (!dev->wakeup.state.enabled || - sleep_state > (u32) dev->wakeup.sleep_state) { + + if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared) + || sleep_state > (u32) dev->wakeup.sleep_state) { if (dev->wakeup.flags.run_wake) { spin_unlock(&acpi_device_lock); acpi_set_gpe_type(dev->wakeup.gpe_device, diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c index d11f74b038db..596aeecfdffe 100644 --- a/drivers/base/power/sysfs.c +++ b/drivers/base/power/sysfs.c @@ -6,9 +6,6 @@ #include #include "power.h" -int (*platform_enable_wakeup)(struct device *dev, int is_on); - - /* * wakeup - Report/change current wakeup option for device * diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 6bc0d8c870af..7764768b6a0e 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -299,10 +299,30 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) return error; } +static bool acpi_pci_can_wakeup(struct pci_dev *dev) +{ + acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev); + + return handle ? acpi_bus_can_wakeup(handle) : false; +} + +static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable) +{ + int error = acpi_pm_device_sleep_wake(&dev->dev, enable); + + if (!error) + dev_printk(KERN_INFO, &dev->dev, + "wake-up capability %s by ACPI\n", + enable ? "enabled" : "disabled"); + return error; +} + static struct pci_platform_pm_ops acpi_pci_platform_pm = { .is_manageable = acpi_pci_power_manageable, .set_state = acpi_pci_set_power_state, .choose_state = acpi_pci_choose_state, + .can_wakeup = acpi_pci_can_wakeup, + .sleep_wake = acpi_pci_sleep_wake, }; /* ACPI bus type */ diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 20e28077b96d..a6b1b6f96abc 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -380,7 +380,8 @@ static struct pci_platform_pm_ops *pci_platform_pm; int pci_set_platform_pm(struct pci_platform_pm_ops *ops) { - if (!ops->is_manageable || !ops->set_state || !ops->choose_state) + if (!ops->is_manageable || !ops->set_state || !ops->choose_state + || !ops->sleep_wake || !ops->can_wakeup) return -EINVAL; pci_platform_pm = ops; return 0; @@ -403,6 +404,17 @@ static inline pci_power_t platform_pci_choose_state(struct pci_dev *dev) pci_platform_pm->choose_state(dev) : PCI_POWER_ERROR; } +static inline bool platform_pci_can_wakeup(struct pci_dev *dev) +{ + return pci_platform_pm ? pci_platform_pm->can_wakeup(dev) : false; +} + +static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) +{ + return pci_platform_pm ? + pci_platform_pm->sleep_wake(dev, enable) : -ENODEV; +} + /** * pci_raw_set_power_state - Use PCI PM registers to set the power state of * given PCI device @@ -1035,6 +1047,56 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) return pcibios_set_pcie_reset_state(dev, state); } +/** + * pci_pme_capable - check the capability of PCI device to generate PME# + * @dev: PCI device to handle. + * @pm: PCI PM capability offset of the device. + * @state: PCI state from which device will issue PME#. + */ +static bool pci_pme_capable(struct pci_dev *dev, int pm, pci_power_t state) +{ + u16 pmc; + + if (!pm) + return false; + + /* Check device's ability to generate PME# from given state */ + pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); + + pmc &= PCI_PM_CAP_PME_MASK; + pmc >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */ + + return !!(pmc & (1 << state)); +} + +/** + * pci_pme_active - enable or disable PCI device's PME# function + * @dev: PCI device to handle. + * @pm: PCI PM capability offset of the device. + * @enable: 'true' to enable PME# generation; 'false' to disable it. + * + * The caller must verify that the device is capable of generating PME# before + * calling this function with @enable equal to 'true'. + */ +static void pci_pme_active(struct pci_dev *dev, int pm, bool enable) +{ + u16 pmcsr; + + if (!pm) + return; + + pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + /* Clear PME_Status by writing 1 to it and enable PME# */ + pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE; + if (!enable) + pmcsr &= ~PCI_PM_CTRL_PME_ENABLE; + + pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr); + + dev_printk(KERN_INFO, &dev->dev, "PME# %s\n", + enable ? "enabled" : "disabled"); +} + /** * pci_enable_wake - enable PCI device as wakeup event source * @dev: PCI device affected @@ -1046,66 +1108,83 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) * called automatically by this routine. * * Devices with legacy power management (no standard PCI PM capabilities) - * always require such platform hooks. Depending on the platform, devices - * supporting the standard PCI PME# signal may require such platform hooks; - * they always update bits in config space to allow PME# generation. + * always require such platform hooks. * - * -EIO is returned if the device can't ever be a wakeup event source. - * -EINVAL is returned if the device can't generate wakeup events from - * the specified PCI state. Returns zero if the operation is successful. + * RETURN VALUE: + * 0 is returned on success + * -EINVAL is returned if device is not supposed to wake up the system + * Error code depending on the platform is returned if both the platform and + * the native mechanism fail to enable the generation of wake-up events */ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) { int pm; - int status; - u16 value; - - /* Note that drivers should verify device_may_wakeup(&dev->dev) - * before calling this function. Platform code should report - * errors when drivers try to enable wakeup on devices that - * can't issue wakeups, or on which wakeups were disabled by - * userspace updating the /sys/devices.../power/wakeup file. - */ + int error = 0; + bool pme_done = false; - status = call_platform_enable_wakeup(&dev->dev, enable); - - /* find PCI PM capability in list */ - pm = pci_find_capability(dev, PCI_CAP_ID_PM); + if (!device_may_wakeup(&dev->dev)) + return -EINVAL; - /* If device doesn't support PM Capabilities, but caller wants to - * disable wake events, it's a NOP. Otherwise fail unless the - * platform hooks handled this legacy device already. + /* + * According to "PCI System Architecture" 4th ed. by Tom Shanley & Don + * Anderson we should be doing PME# wake enable followed by ACPI wake + * enable. To disable wake-up we call the platform first, for symmetry. */ - if (!pm) - return enable ? status : 0; - /* Check device's ability to generate PME# */ - pci_read_config_word(dev,pm+PCI_PM_PMC,&value); + if (!enable && platform_pci_can_wakeup(dev)) + error = platform_pci_sleep_wake(dev, false); - value &= PCI_PM_CAP_PME_MASK; - value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */ - - /* Check if it can generate PME# from requested state. */ - if (!value || !(value & (1 << state))) { - /* if it can't, revert what the platform hook changed, - * always reporting the base "EINVAL, can't PME#" error - */ - if (enable) - call_platform_enable_wakeup(&dev->dev, 0); - return enable ? -EINVAL : 0; + pm = pci_find_capability(dev, PCI_CAP_ID_PM); + if (!enable || pci_pme_capable(dev, pm, state)) { + pci_pme_active(dev, pm, enable); + pme_done = true; } - pci_read_config_word(dev, pm + PCI_PM_CTRL, &value); + if (enable && platform_pci_can_wakeup(dev)) + error = platform_pci_sleep_wake(dev, true); - /* Clear PME_Status by writing 1 to it and enable PME# */ - value |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE; + return pme_done ? 0 : error; +} - if (!enable) - value &= ~PCI_PM_CTRL_PME_ENABLE; +/** + * pci_pm_init - Initialize PM functions of given PCI device + * @dev: PCI device to handle. + */ +void pci_pm_init(struct pci_dev *dev) +{ + int pm; + u16 pmc; - pci_write_config_word(dev, pm + PCI_PM_CTRL, value); + /* find PCI PM capability in list */ + pm = pci_find_capability(dev, PCI_CAP_ID_PM); + if (!pm) + return; + /* Check device's ability to generate PME# */ + pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - return 0; + if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { + dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n", + pmc & PCI_PM_CAP_VER_MASK); + return; + } + + if (pmc & PCI_PM_CAP_PME_MASK) { + dev_printk(KERN_INFO, &dev->dev, + "PME# supported from%s%s%s%s%s\n", + (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "", + (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "", + (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "", + (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "", + (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : ""); + /* + * Make device's PM flags reflect the wake-up capability, but + * let the user space enable it to wake up the system as needed. + */ + device_set_wakeup_capable(&dev->dev, true); + device_set_wakeup_enable(&dev->dev, false); + /* Disable the PME# generation functionality */ + pci_pme_active(dev, pm, false); + } } int diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 0cd2e719933b..b08dfc9746af 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -17,6 +17,11 @@ extern void pci_cleanup_rom(struct pci_dev *dev); * platform; to be used during system-wide transitions from a * sleeping state to the working state and vice versa * + * @can_wakeup - returns 'true' if given device is capable of waking up the + * system from a sleeping state + * + * @sleep_wake - enables/disables the system wake up capability of given device + * * If given platform is generally capable of power managing PCI devices, all of * these callbacks are mandatory. */ @@ -24,9 +29,12 @@ struct pci_platform_pm_ops { bool (*is_manageable)(struct pci_dev *dev); int (*set_state)(struct pci_dev *dev, pci_power_t state); pci_power_t (*choose_state)(struct pci_dev *dev); + bool (*can_wakeup)(struct pci_dev *dev); + int (*sleep_wake)(struct pci_dev *dev, bool enable); }; extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops); +extern void pci_pm_init(struct pci_dev *dev); extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 2f0ae70710d6..b1724cf31b66 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -860,49 +860,6 @@ int pci_cfg_space_size_ext(struct pci_dev *dev) return PCI_CFG_SPACE_SIZE; } -/** - * pci_disable_pme - Disable the PME function of PCI device - * @dev: PCI device affected - * -EINVAL is returned if PCI device doesn't support PME. - * Zero is returned if the PME is supported and can be disabled. - */ -static int pci_disable_pme(struct pci_dev *dev) -{ - int pm; - u16 value; - - /* find PCI PM capability in list */ - pm = pci_find_capability(dev, PCI_CAP_ID_PM); - - /* If device doesn't support PM Capabilities, it means that PME is - * not supported. - */ - if (!pm) - return -EINVAL; - /* Check device's ability to generate PME# */ - pci_read_config_word(dev, pm + PCI_PM_PMC, &value); - - value &= PCI_PM_CAP_PME_MASK; - /* Check if it can generate PME# */ - if (!value) { - /* - * If it is zero, it means that PME is still unsupported - * although there exists the PM capability. - */ - return -EINVAL; - } - - pci_read_config_word(dev, pm + PCI_PM_CTRL, &value); - - /* Clear PME_Status by writing 1 to it */ - value |= PCI_PM_CTRL_PME_STATUS ; - /* Disable PME enable bit */ - value &= ~PCI_PM_CTRL_PME_ENABLE; - pci_write_config_word(dev, pm + PCI_PM_CTRL, value); - - return 0; -} - int pci_cfg_space_size(struct pci_dev *dev) { int pos; @@ -1010,7 +967,6 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn) } pci_vpd_pci22_init(dev); - pci_disable_pme(dev); return dev; } @@ -1031,6 +987,9 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) /* Fix up broken headers */ pci_fixup_device(pci_fixup_header, dev); + /* Initialize power management of the device */ + pci_pm_init(dev); + /* * Add the device to our list of discovered devices * and the bus list for fixup functions, etc. diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 071daf8db600..7ab5a611e43f 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -337,6 +337,7 @@ int acpi_bus_get_status(struct acpi_device *device); int acpi_bus_get_power(acpi_handle handle, int *state); int acpi_bus_set_power(acpi_handle handle, int state); bool acpi_bus_power_manageable(acpi_handle handle); +bool acpi_bus_can_wakeup(acpi_handle handle); #ifdef CONFIG_ACPI_PROC_EVENT int acpi_bus_generate_proc_event(struct acpi_device *device, u8 type, int data); int acpi_bus_generate_proc_event4(const char *class, const char *bid, u8 type, int data); @@ -379,6 +380,7 @@ acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int); #ifdef CONFIG_PM_SLEEP int acpi_pm_device_sleep_state(struct device *, int *); +int acpi_pm_device_sleep_wake(struct device *, bool); #else /* !CONFIG_PM_SLEEP */ static inline int acpi_pm_device_sleep_state(struct device *d, int *p) { diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h index f0d0b2cb8d20..3af0c8d05cdc 100644 --- a/include/linux/pm_wakeup.h +++ b/include/linux/pm_wakeup.h @@ -35,6 +35,11 @@ static inline void device_init_wakeup(struct device *dev, int val) dev->power.can_wakeup = dev->power.should_wakeup = !!val; } +static inline void device_set_wakeup_capable(struct device *dev, int val) +{ + dev->power.can_wakeup = !!val; +} + static inline int device_can_wakeup(struct device *dev) { return dev->power.can_wakeup; @@ -47,21 +52,7 @@ static inline void device_set_wakeup_enable(struct device *dev, int val) static inline int device_may_wakeup(struct device *dev) { - return dev->power.can_wakeup & dev->power.should_wakeup; -} - -/* - * Platform hook to activate device wakeup capability, if that's not already - * handled by enable_irq_wake() etc. - * Returns zero on success, else negative errno - */ -extern int (*platform_enable_wakeup)(struct device *dev, int is_on); - -static inline int call_platform_enable_wakeup(struct device *dev, int is_on) -{ - if (platform_enable_wakeup) - return (*platform_enable_wakeup)(dev, is_on); - return 0; + return dev->power.can_wakeup && dev->power.should_wakeup; } #else /* !CONFIG_PM */ @@ -80,11 +71,6 @@ static inline int device_can_wakeup(struct device *dev) #define device_set_wakeup_enable(dev, val) do {} while (0) #define device_may_wakeup(dev) 0 -static inline int call_platform_enable_wakeup(struct device *dev, int is_on) -{ - return 0; -} - #endif /* !CONFIG_PM */ #endif /* _LINUX_PM_WAKEUP_H */ -- cgit v1.2.3 From 404cc2d8ce41ed4031958fba8e633767e8a2e028 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:35:26 +0200 Subject: PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep Introduce functions pci_prepare_to_sleep() and pci_back_from_sleep(), to be used by the PCI drivers that want to place their devices into the lowest power state appropiate for them (PCI_D3hot, if the device is not supposed to wake up the system, or the deepest state from which the wake-up is possible, otherwise) while the system is being prepared to go into a sleeping state and to put them back into D0 during the subsequent transition to the working state. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 83 +++++++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/pci.h | 2 ++ 2 files changed, 85 insertions(+) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index a6b1b6f96abc..1b0ec45e9934 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1146,6 +1146,87 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) return pme_done ? 0 : error; } +/** + * pci_prepare_to_sleep - prepare PCI device for system-wide transition into + * a sleep state + * @dev: Device to handle. + * + * Choose the power state appropriate for the device depending on whether + * it can wake up the system and/or is power manageable by the platform + * (PCI_D3hot is the default) and put the device into that state. + */ +int pci_prepare_to_sleep(struct pci_dev *dev) +{ + pci_power_t target_state = PCI_D3hot; + int pm = pci_find_capability(dev, PCI_CAP_ID_PM); + int error; + + if (platform_pci_power_manageable(dev)) { + /* + * Call the platform to choose the target state of the device + * and enable wake-up from this state if supported. + */ + pci_power_t state = platform_pci_choose_state(dev); + + switch (state) { + case PCI_POWER_ERROR: + case PCI_UNKNOWN: + break; + case PCI_D1: + case PCI_D2: + if (pci_no_d1d2(dev)) + break; + default: + target_state = state; + pci_enable_wake(dev, target_state, true); + } + } else if (device_may_wakeup(&dev->dev)) { + /* + * Find the deepest state from which the device can generate + * wake-up events, make it the target state and enable device + * to generate PME#. + */ + u16 pmc; + + if (!pm) + return -EIO; + + pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); + if (pmc & PCI_PM_CAP_PME_MASK) { + if (!(pmc & PCI_PM_CAP_PME_D3)) { + /* Device cannot generate PME# from D3_hot */ + if (pmc & PCI_PM_CAP_PME_D2) + target_state = PCI_D2; + else if (pmc & PCI_PM_CAP_PME_D1) + target_state = PCI_D1; + else + target_state = PCI_D0; + } + pci_pme_active(dev, pm, true); + } + } + + error = pci_set_power_state(dev, target_state); + + if (error) + pci_enable_wake(dev, target_state, false); + + return error; +} + +/** + * pci_back_from_sleep - turn PCI device on during system-wide transition into + * the working state a sleep state + * @dev: Device to handle. + * + * Disable device's sytem wake-up capability and put it into D0. + */ +int pci_back_from_sleep(struct pci_dev *dev) +{ + pci_enable_wake(dev, PCI_D0, false); + return pci_set_power_state(dev, PCI_D0); +} + /** * pci_pm_init - Initialize PM functions of given PCI device * @dev: PCI device to handle. @@ -1853,5 +1934,7 @@ EXPORT_SYMBOL(pci_set_power_state); EXPORT_SYMBOL(pci_save_state); EXPORT_SYMBOL(pci_restore_state); EXPORT_SYMBOL(pci_enable_wake); +EXPORT_SYMBOL(pci_prepare_to_sleep); +EXPORT_SYMBOL(pci_back_from_sleep); EXPORT_SYMBOL_GPL(pci_set_pcie_reset_state); diff --git a/include/linux/pci.h b/include/linux/pci.h index 4c80dc3f2990..52ac06dcce98 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -632,6 +632,8 @@ int pci_restore_state(struct pci_dev *dev); int pci_set_power_state(struct pci_dev *dev, pci_power_t state); pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state); int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable); +int pci_prepare_to_sleep(struct pci_dev *dev); +int pci_back_from_sleep(struct pci_dev *dev); /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); -- cgit v1.2.3 From 337001b6c42938f49a880b1b8306c3ed771a7e61 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 7 Jul 2008 03:36:24 +0200 Subject: PCI: Simplify PCI device PM code If the offset of PCI device's PM capability in its configuration space, the mask of states that the device supports PME# from and the D1 and D2 support bits are cached in the corresponding struct pci_dev, the PCI device PM code can be simplified quite a bit. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 118 +++++++++++++++++++++-------------------------- include/linux/pci.h | 8 +++- include/linux/pci_regs.h | 1 + 3 files changed, 60 insertions(+), 67 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 1b0ec45e9934..e632a58ba5d0 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -419,7 +419,6 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * pci_raw_set_power_state - Use PCI PM registers to set the power state of * given PCI device * @dev: PCI device to handle. - * @pm: PCI PM capability offset of the device. * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. * * RETURN VALUE: @@ -430,12 +429,12 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * 0 if device's power state has been successfully changed. */ static int -pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) +pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) { - u16 pmcsr, pmc; + u16 pmcsr; bool need_restore = false; - if (!pm) + if (!dev->pm_cap) return -EIO; if (state < PCI_D0 || state > PCI_D3hot) @@ -455,20 +454,12 @@ pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) return -EINVAL; } - pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - - if ((pmc & PCI_PM_CAP_VER_MASK) > 3) { - dev_err(&dev->dev, "unsupported PM cap regs version (%u)\n", - pmc & PCI_PM_CAP_VER_MASK); - return -EIO; - } - /* check if this device supports the desired state */ - if ((state == PCI_D1 && !(pmc & PCI_PM_CAP_D1)) - || (state == PCI_D2 && !(pmc & PCI_PM_CAP_D2))) + if ((state == PCI_D1 && !dev->d1_support) + || (state == PCI_D2 && !dev->d2_support)) return -EIO; - pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); /* If we're (effectively) in D3, force entire word to 0. * This doesn't affect PME_Status, disables PME_En, and @@ -492,7 +483,7 @@ pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) } /* enter specified state */ - pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr); + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ @@ -528,14 +519,13 @@ pci_raw_set_power_state(struct pci_dev *dev, int pm, pci_power_t state) * pci_update_current_state - Read PCI power state of given device from its * PCI PM registers and cache it * @dev: PCI device to handle. - * @pm: PCI PM capability offset of the device. */ -static void pci_update_current_state(struct pci_dev *dev, int pm) +static void pci_update_current_state(struct pci_dev *dev) { - if (pm) { + if (dev->pm_cap) { u16 pmcsr; - pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); } } @@ -557,7 +547,7 @@ static void pci_update_current_state(struct pci_dev *dev, int pm) */ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) { - int pm, error; + int error; /* bound the state we're entering */ if (state > PCI_D3hot) @@ -572,9 +562,6 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) */ return 0; - /* Find PCI PM capability in the list */ - pm = pci_find_capability(dev, PCI_CAP_ID_PM); - if (state == PCI_D0 && platform_pci_power_manageable(dev)) { /* * Allow the platform to change the state, for example via ACPI @@ -582,16 +569,16 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) */ int ret = platform_pci_set_power_state(dev, PCI_D0); if (!ret) - pci_update_current_state(dev, pm); + pci_update_current_state(dev); } - error = pci_raw_set_power_state(dev, pm, state); + error = pci_raw_set_power_state(dev, state); if (state > PCI_D0 && platform_pci_power_manageable(dev)) { /* Allow the platform to finalize the transition */ int ret = platform_pci_set_power_state(dev, state); if (!ret) { - pci_update_current_state(dev, pm); + pci_update_current_state(dev); error = 0; } } @@ -1050,48 +1037,38 @@ int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) /** * pci_pme_capable - check the capability of PCI device to generate PME# * @dev: PCI device to handle. - * @pm: PCI PM capability offset of the device. * @state: PCI state from which device will issue PME#. */ -static bool pci_pme_capable(struct pci_dev *dev, int pm, pci_power_t state) +static bool pci_pme_capable(struct pci_dev *dev, pci_power_t state) { - u16 pmc; - - if (!pm) + if (!dev->pm_cap) return false; - /* Check device's ability to generate PME# from given state */ - pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - - pmc &= PCI_PM_CAP_PME_MASK; - pmc >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */ - - return !!(pmc & (1 << state)); + return !!(dev->pme_support & (1 << state)); } /** * pci_pme_active - enable or disable PCI device's PME# function * @dev: PCI device to handle. - * @pm: PCI PM capability offset of the device. * @enable: 'true' to enable PME# generation; 'false' to disable it. * * The caller must verify that the device is capable of generating PME# before * calling this function with @enable equal to 'true'. */ -static void pci_pme_active(struct pci_dev *dev, int pm, bool enable) +static void pci_pme_active(struct pci_dev *dev, bool enable) { u16 pmcsr; - if (!pm) + if (!dev->pm_cap) return; - pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr); + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); /* Clear PME_Status by writing 1 to it and enable PME# */ pmcsr |= PCI_PM_CTRL_PME_STATUS | PCI_PM_CTRL_PME_ENABLE; if (!enable) pmcsr &= ~PCI_PM_CTRL_PME_ENABLE; - pci_write_config_word(dev, pm + PCI_PM_CTRL, pmcsr); + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); dev_printk(KERN_INFO, &dev->dev, "PME# %s\n", enable ? "enabled" : "disabled"); @@ -1118,7 +1095,6 @@ static void pci_pme_active(struct pci_dev *dev, int pm, bool enable) */ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) { - int pm; int error = 0; bool pme_done = false; @@ -1134,9 +1110,8 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) if (!enable && platform_pci_can_wakeup(dev)) error = platform_pci_sleep_wake(dev, false); - pm = pci_find_capability(dev, PCI_CAP_ID_PM); - if (!enable || pci_pme_capable(dev, pm, state)) { - pci_pme_active(dev, pm, enable); + if (!enable || pci_pme_capable(dev, state)) { + pci_pme_active(dev, enable); pme_done = true; } @@ -1158,7 +1133,6 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) int pci_prepare_to_sleep(struct pci_dev *dev) { pci_power_t target_state = PCI_D3hot; - int pm = pci_find_capability(dev, PCI_CAP_ID_PM); int error; if (platform_pci_power_manageable(dev)) { @@ -1186,23 +1160,14 @@ int pci_prepare_to_sleep(struct pci_dev *dev) * wake-up events, make it the target state and enable device * to generate PME#. */ - u16 pmc; - - if (!pm) + if (!dev->pm_cap) return -EIO; - pci_read_config_word(dev, pm + PCI_PM_PMC, &pmc); - if (pmc & PCI_PM_CAP_PME_MASK) { - if (!(pmc & PCI_PM_CAP_PME_D3)) { - /* Device cannot generate PME# from D3_hot */ - if (pmc & PCI_PM_CAP_PME_D2) - target_state = PCI_D2; - else if (pmc & PCI_PM_CAP_PME_D1) - target_state = PCI_D1; - else - target_state = PCI_D0; - } - pci_pme_active(dev, pm, true); + if (dev->pme_support) { + while (target_state + && !(dev->pme_support & (1 << target_state))) + target_state--; + pci_pme_active(dev, true); } } @@ -1236,6 +1201,8 @@ void pci_pm_init(struct pci_dev *dev) int pm; u16 pmc; + dev->pm_cap = 0; + /* find PCI PM capability in list */ pm = pci_find_capability(dev, PCI_CAP_ID_PM); if (!pm) @@ -1249,7 +1216,23 @@ void pci_pm_init(struct pci_dev *dev) return; } - if (pmc & PCI_PM_CAP_PME_MASK) { + dev->pm_cap = pm; + + dev->d1_support = false; + dev->d2_support = false; + if (!pci_no_d1d2(dev)) { + if (pmc & PCI_PM_CAP_D1) { + dev_printk(KERN_DEBUG, &dev->dev, "supports D1\n"); + dev->d1_support = true; + } + if (pmc & PCI_PM_CAP_D2) { + dev_printk(KERN_DEBUG, &dev->dev, "supports D2\n"); + dev->d2_support = true; + } + } + + pmc &= PCI_PM_CAP_PME_MASK; + if (pmc) { dev_printk(KERN_INFO, &dev->dev, "PME# supported from%s%s%s%s%s\n", (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "", @@ -1257,6 +1240,7 @@ void pci_pm_init(struct pci_dev *dev) (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "", (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "", (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : ""); + dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT; /* * Make device's PM flags reflect the wake-up capability, but * let the user space enable it to wake up the system as needed. @@ -1264,7 +1248,9 @@ void pci_pm_init(struct pci_dev *dev) device_set_wakeup_capable(&dev->dev, true); device_set_wakeup_enable(&dev->dev, false); /* Disable the PME# generation functionality */ - pci_pme_active(dev, pm, false); + pci_pme_active(dev, false); + } else { + dev->pme_support = 0; } } diff --git a/include/linux/pci.h b/include/linux/pci.h index 52ac06dcce98..68a29f0f2748 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -177,6 +177,13 @@ struct pci_dev { pci_power_t current_state; /* Current operating state. In ACPI-speak, this is D0-D3, D0 being fully functional, and D3 being off. */ + int pm_cap; /* PM capability offset in the + configuration space */ + unsigned int pme_support:5; /* Bitmask of states from which PME# + can be generated */ + unsigned int d1_support:1; /* Low power state D1 is supported */ + unsigned int d2_support:1; /* Low power state D2 is supported */ + unsigned int no_d1d2:1; /* Only allow D0 and D3 */ #ifdef CONFIG_PCIEASPM struct pcie_link_state *link_state; /* ASPM link state. */ @@ -201,7 +208,6 @@ struct pci_dev { unsigned int is_added:1; unsigned int is_busmaster:1; /* device is busmaster */ unsigned int no_msi:1; /* device may not use msi */ - unsigned int no_d1d2:1; /* only allow d0 or d3 */ unsigned int block_ucfg_access:1; /* userspace config space access is blocked */ unsigned int broken_parity_status:1; /* Device generates false positive parity */ unsigned int msi_enabled:1; diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index c0c1223c9194..19958b929905 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -231,6 +231,7 @@ #define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ #define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ #define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ +#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */ #define PCI_PM_CTRL 4 /* PM control and status register */ #define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */ #define PCI_PM_CTRL_NO_SOFT_RESET 0x0004 /* No reset for D3hot->D0 */ -- cgit v1.2.3 From aa276e1cafb3ce9d01d1e837bcd67e92616013ac Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 9 Jun 2008 19:15:00 +0200 Subject: x86, clockevents: add C1E aware idle function C1E on AMD machines is like C3 but without control from the OS. Up to now we disabled the local apic timer for those machines as it stops when the CPU goes into C1E. This excludes those machines from high resolution timers / dynamic ticks, which hurts especially X2 based laptops. The current boot time C1E detection has another, more serious flaw as well: some BIOSes do not enable C1E until the ACPI processor module is loaded. This causes systems to stop working after that point. To work nicely with C1E enabled machines we use a separate idle function, which checks on idle entry whether C1E was enabled in the Interrupt Pending Message MSR. This allows us to do timer broadcasting for C1E and covers the late enablement of C1E as well. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic_32.c | 5 ++-- arch/x86/kernel/apic_64.c | 26 +---------------- arch/x86/kernel/cpu/amd.c | 30 -------------------- arch/x86/kernel/cpu/amd_64.c | 25 ----------------- arch/x86/kernel/process.c | 66 ++++++++++++++++++++++++++++++++++++++++++++ include/asm-x86/apic.h | 3 -- kernel/time/tick-broadcast.c | 6 ++-- 7 files changed, 73 insertions(+), 88 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6c..c44206e731d4 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -64,9 +64,8 @@ static int enable_local_apic __initdata; /* Local APIC timer verification ok */ static int local_apic_timer_verify_ok; -/* Disable local APIC timer from the kernel commandline or via dmi quirk - or using CPU MSR check */ -int local_apic_timer_disabled; +/* Disable local APIC timer from the kernel commandline or via dmi quirk */ +static int local_apic_timer_disabled; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok); diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 0633cfd0dc29..a5cc8447cf4d 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -43,7 +43,7 @@ #include #include -int disable_apic_timer __cpuinitdata; +static int disable_apic_timer __cpuinitdata; static int apic_calibrate_pmtmr __initdata; int disable_apic; @@ -422,32 +422,8 @@ void __init setup_boot_APIC_clock(void) setup_APIC_timer(); } -/* - * AMD C1E enabled CPUs have a real nasty problem: Some BIOSes set the - * C1E flag only in the secondary CPU, so when we detect the wreckage - * we already have enabled the boot CPU local apic timer. Check, if - * disable_apic_timer is set and the DUMMY flag is cleared. If yes, - * set the DUMMY flag again and force the broadcast mode in the - * clockevents layer. - */ -static void __cpuinit check_boot_apic_timer_broadcast(void) -{ - if (!disable_apic_timer || - (lapic_clockevent.features & CLOCK_EVT_FEAT_DUMMY)) - return; - - printk(KERN_INFO "AMD C1E detected late. Force timer broadcast.\n"); - lapic_clockevent.features |= CLOCK_EVT_FEAT_DUMMY; - - local_irq_enable(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, - &boot_cpu_physical_apicid); - local_irq_disable(); -} - void __cpuinit setup_secondary_APIC_clock(void) { - check_boot_apic_timer_broadcast(); setup_APIC_timer(); } diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index e76b49e7a916..acc891ae5901 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -24,31 +24,6 @@ extern void vide(void); __asm__(".align 4\nvide: ret"); -#ifdef CONFIG_X86_LOCAL_APIC - -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(struct cpuinfo_x86 *c) -{ - u32 lo, hi; - - if (c->x86 < 0x0F) - return 0; - - /* Family 0x0f models < rev F do not have this MSR */ - if (c->x86 == 0x0f && c->x86_model < 0x40) - return 0; - - rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); - if (lo & K8_INTP_C1E_ACTIVE_MASK) { - if (smp_processor_id() != boot_cpu_physical_apicid) - printk(KERN_INFO "AMD C1E detected late. " - "Force timer broadcast.\n"); - return 1; - } - return 0; -} -#endif - int force_mwait __cpuinitdata; static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) @@ -285,11 +260,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) num_cache_leaves = 3; } -#ifdef CONFIG_X86_LOCAL_APIC - if (amd_apic_timer_broken(c)) - local_apic_timer_disabled = 1; -#endif - /* K6s reports MCEs but don't actually have all the MSRs */ if (c->x86 < 6) clear_cpu_cap(c, X86_FEATURE_MCE); diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c index f5fc161d8f2a..f8d20588bde9 100644 --- a/arch/x86/kernel/cpu/amd_64.c +++ b/arch/x86/kernel/cpu/amd_64.c @@ -110,28 +110,6 @@ static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) #endif } -/* AMD systems with C1E don't have a working lAPIC timer. Check for that. */ -static __cpuinit int amd_apic_timer_broken(struct cpuinfo_x86 *c) -{ - u32 lo, hi; - - if (c->x86 < 0x0F) - return 0; - - /* Family 0x0f models < rev F do not have this MSR */ - if (c->x86 == 0x0f && c->x86_model < 0x40) - return 0; - - rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); - if (lo & K8_INTP_C1E_ACTIVE_MASK) { - if (smp_processor_id() != boot_cpu_physical_apicid) - printk(KERN_INFO "AMD C1E detected late. " - "Force timer broadcast.\n"); - return 1; - } - return 0; -} - void __cpuinit early_init_amd(struct cpuinfo_x86 *c) { early_init_amd_mc(c); @@ -212,9 +190,6 @@ void __cpuinit init_amd(struct cpuinfo_x86 *c) if (c->x86 == 0x10) amd_enable_pci_ext_cfg(c); - if (amd_apic_timer_broken(c)) - disable_apic_timer = 1; - if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { unsigned long long tseg; diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 9fea14607dfe..68ad3539b143 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -6,6 +6,7 @@ #include #include #include +#include struct kmem_cache *task_xstate_cachep; @@ -219,6 +220,68 @@ static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c) return (edx & MWAIT_EDX_C1); } +/* + * Check for AMD CPUs, which have potentially C1E support + */ +static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c) +{ + if (c->x86_vendor != X86_VENDOR_AMD) + return 0; + + if (c->x86 < 0x0F) + return 0; + + /* Family 0x0f models < rev F do not have C1E */ + if (c->x86 == 0x0f && c->x86_model < 0x40) + return 0; + + return 1; +} + +/* + * C1E aware idle routine. We check for C1E active in the interrupt + * pending message MSR. If we detect C1E, then we handle it the same + * way as C3 power states (local apic timer and TSC stop) + */ +static void c1e_idle(void) +{ + static cpumask_t c1e_mask = CPU_MASK_NONE; + static int c1e_detected; + + if (need_resched()) + return; + + if (!c1e_detected) { + u32 lo, hi; + + rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); + if (lo & K8_INTP_C1E_ACTIVE_MASK) { + c1e_detected = 1; + mark_tsc_unstable("TSC halt in C1E"); + printk(KERN_INFO "System has C1E enabled\n"); + } + } + + if (c1e_detected) { + int cpu = smp_processor_id(); + + if (!cpu_isset(cpu, c1e_mask)) { + cpu_set(cpu, c1e_mask); + /* Force broadcast so ACPI can not interfere */ + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, + &cpu); + printk(KERN_INFO "Switch to broadcast mode on CPU%d\n", + cpu); + } + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); + default_idle(); + local_irq_disable(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu); + local_irq_enable(); + } else + default_idle(); +} + void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) { #ifdef CONFIG_X86_SMP @@ -236,6 +299,9 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) */ printk(KERN_INFO "using mwait in idle threads.\n"); pm_idle = mwait_idle; + } else if (check_c1e_idle(c)) { + printk(KERN_INFO "using C1E aware idle routine\n"); + pm_idle = c1e_idle; } else pm_idle = default_idle; } diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h index be9639a9a186..3c387cda95fa 100644 --- a/include/asm-x86/apic.h +++ b/include/asm-x86/apic.h @@ -38,12 +38,9 @@ extern void generic_apic_probe(void); extern int apic_verbosity; extern int timer_over_8254; extern int local_apic_timer_c2_ok; -extern int local_apic_timer_disabled; -extern int apic_runs_main_timer; extern int ioapic_force; extern int disable_apic; -extern int disable_apic_timer; /* * Basic functions accessing APICs. diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 57a1f02e5ec0..67f80c261709 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -30,6 +30,7 @@ struct tick_device tick_broadcast_device; static cpumask_t tick_broadcast_mask; static DEFINE_SPINLOCK(tick_broadcast_lock); +static int tick_broadcast_force; #ifdef CONFIG_TICK_ONESHOT static void tick_broadcast_clear_oneshot(int cpu); @@ -232,10 +233,11 @@ static void tick_do_broadcast_on_off(void *why) CLOCK_EVT_MODE_SHUTDOWN); } if (*reason == CLOCK_EVT_NOTIFY_BROADCAST_FORCE) - dev->features |= CLOCK_EVT_FEAT_DUMMY; + tick_broadcast_force = 1; break; case CLOCK_EVT_NOTIFY_BROADCAST_OFF: - if (cpu_isset(cpu, tick_broadcast_mask)) { + if (!tick_broadcast_force && + cpu_isset(cpu, tick_broadcast_mask)) { cpu_clear(cpu, tick_broadcast_mask); if (td->mode == TICKDEV_MODE_PERIODIC) tick_setup_periodic(dev, 0); -- cgit v1.2.3 From 0beefa208bb3a9e581a60125703409ebe6f7fa53 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 17 Jun 2008 09:12:03 +0200 Subject: x86: add C1E aware idle function, fix On Tue, 17 Jun 2008, Rafael J. Wysocki wrote: > > BTW, with the C1E patches reverted I don't get the > WARNING: at /home/rafael/src/linux-next/kernel/smp.c:215 smp_call_function_single+0x3d/0xa2 > in the log. Thomas? The BROADCAST_FORCE notification uses smp_function_call and therefor must be run with interrupts enabled. While at it, add a comment for the BROADCAST_EXIT notifier as well. Reported-and-bisected-by: Rafael J. Wysocki Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/process.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 68ad3539b143..4061d63aabe7 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -267,17 +267,29 @@ static void c1e_idle(void) if (!cpu_isset(cpu, c1e_mask)) { cpu_set(cpu, c1e_mask); - /* Force broadcast so ACPI can not interfere */ + /* + * Force broadcast so ACPI can not interfere. Needs + * to run with interrupts enabled as it uses + * smp_function_call. + */ + local_irq_enable(); clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, &cpu); printk(KERN_INFO "Switch to broadcast mode on CPU%d\n", cpu); + local_irq_disable(); } clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); + default_idle(); - local_irq_disable(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu); - local_irq_enable(); + + /* + * The switch back from broadcast mode needs to be + * called with interrupts disabled. + */ + local_irq_disable(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu); + local_irq_enable(); } else default_idle(); } -- cgit v1.2.3 From 24bfdca7b7da971ef9a483303a096ac6d4b3a02c Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Thu, 12 Jun 2008 20:19:22 +0200 Subject: x86/pci: Renaming k8-bus_64.c to amd_bus.c The name fits better since this is code not only for K8. Signed-off-by: Robert Richter Signed-off-by: Ingo Molnar --- arch/x86/pci/Makefile_64 | 2 +- arch/x86/pci/amd_bus.c | 528 +++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/pci/k8-bus_64.c | 528 ----------------------------------------------- 3 files changed, 529 insertions(+), 529 deletions(-) create mode 100644 arch/x86/pci/amd_bus.c delete mode 100644 arch/x86/pci/k8-bus_64.c diff --git a/arch/x86/pci/Makefile_64 b/arch/x86/pci/Makefile_64 index 8fbd19832cf6..fd47068c95de 100644 --- a/arch/x86/pci/Makefile_64 +++ b/arch/x86/pci/Makefile_64 @@ -13,5 +13,5 @@ obj-y += legacy.o irq.o common.o early.o # mmconfig has a 64bit special obj-$(CONFIG_PCI_MMCONFIG) += mmconfig_64.o direct.o mmconfig-shared.o -obj-y += k8-bus_64.o +obj-y += amd_bus.o diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c new file mode 100644 index 000000000000..5c2799c20e47 --- /dev/null +++ b/arch/x86/pci/amd_bus.c @@ -0,0 +1,528 @@ +#include +#include +#include +#include +#include +#include + +/* + * This discovers the pcibus <-> node mapping on AMD K8. + * also get peer root bus resource for io,mmio + */ + + +/* + * sub bus (transparent) will use entres from 3 to store extra from root, + * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES? + */ +#define RES_NUM 16 +struct pci_root_info { + char name[12]; + unsigned int res_num; + struct resource res[RES_NUM]; + int bus_min; + int bus_max; + int node; + int link; +}; + +/* 4 at this time, it may become to 32 */ +#define PCI_ROOT_NR 4 +static int pci_root_num; +static struct pci_root_info pci_root_info[PCI_ROOT_NR]; + +#ifdef CONFIG_NUMA + +#define BUS_NR 256 + +static int mp_bus_to_node[BUS_NR]; + +void set_mp_bus_to_node(int busnum, int node) +{ + if (busnum >= 0 && busnum < BUS_NR) + mp_bus_to_node[busnum] = node; +} + +int get_mp_bus_to_node(int busnum) +{ + int node = -1; + + if (busnum < 0 || busnum > (BUS_NR - 1)) + return node; + + node = mp_bus_to_node[busnum]; + + /* + * let numa_node_id to decide it later in dma_alloc_pages + * if there is no ram on that node + */ + if (node != -1 && !node_online(node)) + node = -1; + + return node; +} +#endif + +void set_pci_bus_resources_arch_default(struct pci_bus *b) +{ + int i; + int j; + struct pci_root_info *info; + + /* if only one root bus, don't need to anything */ + if (pci_root_num < 2) + return; + + for (i = 0; i < pci_root_num; i++) { + if (pci_root_info[i].bus_min == b->number) + break; + } + + if (i == pci_root_num) + return; + + info = &pci_root_info[i]; + for (j = 0; j < info->res_num; j++) { + struct resource *res; + struct resource *root; + + res = &info->res[j]; + b->resource[j] = res; + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + else + root = &iomem_resource; + insert_resource(root, res); + } +} + +#define RANGE_NUM 16 + +struct res_range { + size_t start; + size_t end; +}; + +static void __init update_range(struct res_range *range, size_t start, + size_t end) +{ + int i; + int j; + + for (j = 0; j < RANGE_NUM; j++) { + if (!range[j].end) + continue; + + if (start <= range[j].start && end >= range[j].end) { + range[j].start = 0; + range[j].end = 0; + continue; + } + + if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) { + range[j].start = end + 1; + continue; + } + + + if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) { + range[j].end = start - 1; + continue; + } + + if (start > range[j].start && end < range[j].end) { + /* find the new spare */ + for (i = 0; i < RANGE_NUM; i++) { + if (range[i].end == 0) + break; + } + if (i < RANGE_NUM) { + range[i].end = range[j].end; + range[i].start = end + 1; + } else { + printk(KERN_ERR "run of slot in ranges\n"); + } + range[j].end = start - 1; + continue; + } + } +} + +static void __init update_res(struct pci_root_info *info, size_t start, + size_t end, unsigned long flags, int merge) +{ + int i; + struct resource *res; + + if (!merge) + goto addit; + + /* try to merge it with old one */ + for (i = 0; i < info->res_num; i++) { + size_t final_start, final_end; + size_t common_start, common_end; + + res = &info->res[i]; + if (res->flags != flags) + continue; + + common_start = max((size_t)res->start, start); + common_end = min((size_t)res->end, end); + if (common_start > common_end + 1) + continue; + + final_start = min((size_t)res->start, start); + final_end = max((size_t)res->end, end); + + res->start = final_start; + res->end = final_end; + return; + } + +addit: + + /* need to add that */ + if (info->res_num >= RES_NUM) + return; + + res = &info->res[info->res_num]; + res->name = info->name; + res->flags = flags; + res->start = start; + res->end = end; + res->child = NULL; + info->res_num++; +} + +struct pci_hostbridge_probe { + u32 bus; + u32 slot; + u32 vendor; + u32 device; +}; + +static struct pci_hostbridge_probe pci_probes[] __initdata = { + { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 }, + { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, + { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, + { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 }, +}; + +static u64 __initdata fam10h_mmconf_start; +static u64 __initdata fam10h_mmconf_end; +static void __init get_pci_mmcfg_amd_fam10h_range(void) +{ + u32 address; + u64 base, msr; + unsigned segn_busn_bits; + + /* assume all cpus from fam10h have mmconf */ + if (boot_cpu_data.x86 < 0x10) + return; + + address = MSR_FAM10H_MMIO_CONF_BASE; + rdmsrl(address, msr); + + /* mmconfig is not enable */ + if (!(msr & FAM10H_MMIO_CONF_ENABLE)) + return; + + base = msr & (FAM10H_MMIO_CONF_BASE_MASK<> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & + FAM10H_MMIO_CONF_BUSRANGE_MASK; + + fam10h_mmconf_start = base; + fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1; +} + +/** + * early_fill_mp_bus_to_node() + * called before pcibios_scan_root and pci_scan_bus + * fills the mp_bus_to_cpumask array based according to the LDT Bus Number + * Registers found in the K8 northbridge + */ +static int __init early_fill_mp_bus_info(void) +{ + int i; + int j; + unsigned bus; + unsigned slot; + int found; + int node; + int link; + int def_node; + int def_link; + struct pci_root_info *info; + u32 reg; + struct resource *res; + size_t start; + size_t end; + struct res_range range[RANGE_NUM]; + u64 val; + u32 address; + +#ifdef CONFIG_NUMA + for (i = 0; i < BUS_NR; i++) + mp_bus_to_node[i] = -1; +#endif + + if (!early_pci_allowed()) + return -1; + + found = 0; + for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { + u32 id; + u16 device; + u16 vendor; + + bus = pci_probes[i].bus; + slot = pci_probes[i].slot; + id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); + + vendor = id & 0xffff; + device = (id>>16) & 0xffff; + if (pci_probes[i].vendor == vendor && + pci_probes[i].device == device) { + found = 1; + break; + } + } + + if (!found) + return 0; + + pci_root_num = 0; + for (i = 0; i < 4; i++) { + int min_bus; + int max_bus; + reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2)); + + /* Check if that register is enabled for bus range */ + if ((reg & 7) != 3) + continue; + + min_bus = (reg >> 16) & 0xff; + max_bus = (reg >> 24) & 0xff; + node = (reg >> 4) & 0x07; +#ifdef CONFIG_NUMA + for (j = min_bus; j <= max_bus; j++) + mp_bus_to_node[j] = (unsigned char) node; +#endif + link = (reg >> 8) & 0x03; + + info = &pci_root_info[pci_root_num]; + info->bus_min = min_bus; + info->bus_max = max_bus; + info->node = node; + info->link = link; + sprintf(info->name, "PCI Bus #%02x", min_bus); + pci_root_num++; + } + + /* get the default node and link for left over res */ + reg = read_pci_config(bus, slot, 0, 0x60); + def_node = (reg >> 8) & 0x07; + reg = read_pci_config(bus, slot, 0, 0x64); + def_link = (reg >> 8) & 0x03; + + memset(range, 0, sizeof(range)); + range[0].end = 0xffff; + /* io port resource */ + for (i = 0; i < 4; i++) { + reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3)); + if (!(reg & 3)) + continue; + + start = reg & 0xfff000; + reg = read_pci_config(bus, slot, 1, 0xc4 + (i << 3)); + node = reg & 0x07; + link = (reg >> 4) & 0x03; + end = (reg & 0xfff000) | 0xfff; + + /* find the position */ + for (j = 0; j < pci_root_num; j++) { + info = &pci_root_info[j]; + if (info->node == node && info->link == link) + break; + } + if (j == pci_root_num) + continue; /* not found */ + + info = &pci_root_info[j]; + printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n", + node, link, (u64)start, (u64)end); + + /* kernel only handle 16 bit only */ + if (end > 0xffff) + end = 0xffff; + update_res(info, start, end, IORESOURCE_IO, 1); + update_range(range, start, end); + } + /* add left over io port range to def node/link, [0, 0xffff] */ + /* find the position */ + for (j = 0; j < pci_root_num; j++) { + info = &pci_root_info[j]; + if (info->node == def_node && info->link == def_link) + break; + } + if (j < pci_root_num) { + info = &pci_root_info[j]; + for (i = 0; i < RANGE_NUM; i++) { + if (!range[i].end) + continue; + + update_res(info, range[i].start, range[i].end, + IORESOURCE_IO, 1); + } + } + + memset(range, 0, sizeof(range)); + /* 0xfd00000000-0xffffffffff for HT */ + range[0].end = (0xfdULL<<32) - 1; + + /* need to take out [0, TOM) for RAM*/ + address = MSR_K8_TOP_MEM1; + rdmsrl(address, val); + end = (val & 0xffffff8000000ULL); + printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20); + if (end < (1ULL<<32)) + update_range(range, 0, end - 1); + + /* get mmconfig */ + get_pci_mmcfg_amd_fam10h_range(); + /* need to take out mmconf range */ + if (fam10h_mmconf_end) { + printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end); + update_range(range, fam10h_mmconf_start, fam10h_mmconf_end); + } + + /* mmio resource */ + for (i = 0; i < 8; i++) { + reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); + if (!(reg & 3)) + continue; + + start = reg & 0xffffff00; /* 39:16 on 31:8*/ + start <<= 8; + reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); + node = reg & 0x07; + link = (reg >> 4) & 0x03; + end = (reg & 0xffffff00); + end <<= 8; + end |= 0xffff; + + /* find the position */ + for (j = 0; j < pci_root_num; j++) { + info = &pci_root_info[j]; + if (info->node == node && info->link == link) + break; + } + if (j == pci_root_num) + continue; /* not found */ + + info = &pci_root_info[j]; + + printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]", + node, link, (u64)start, (u64)end); + /* + * some sick allocation would have range overlap with fam10h + * mmconf range, so need to update start and end. + */ + if (fam10h_mmconf_end) { + int changed = 0; + u64 endx = 0; + if (start >= fam10h_mmconf_start && + start <= fam10h_mmconf_end) { + start = fam10h_mmconf_end + 1; + changed = 1; + } + + if (end >= fam10h_mmconf_start && + end <= fam10h_mmconf_end) { + end = fam10h_mmconf_start - 1; + changed = 1; + } + + if (start < fam10h_mmconf_start && + end > fam10h_mmconf_end) { + /* we got a hole */ + endx = fam10h_mmconf_start - 1; + update_res(info, start, endx, IORESOURCE_MEM, 0); + update_range(range, start, endx); + printk(KERN_CONT " ==> [%llx, %llx]", (u64)start, endx); + start = fam10h_mmconf_end + 1; + changed = 1; + } + if (changed) { + if (start <= end) { + printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", (u64)start, (u64)end); + } else { + printk(KERN_CONT "%s\n", endx?"":" ==> none"); + continue; + } + } + } + + update_res(info, start, end, IORESOURCE_MEM, 1); + update_range(range, start, end); + printk(KERN_CONT "\n"); + } + + /* need to take out [4G, TOM2) for RAM*/ + /* SYS_CFG */ + address = MSR_K8_SYSCFG; + rdmsrl(address, val); + /* TOP_MEM2 is enabled? */ + if (val & (1<<21)) { + /* TOP_MEM2 */ + address = MSR_K8_TOP_MEM2; + rdmsrl(address, val); + end = (val & 0xffffff8000000ULL); + printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20); + update_range(range, 1ULL<<32, end - 1); + } + + /* + * add left over mmio range to def node/link ? + * that is tricky, just record range in from start_min to 4G + */ + for (j = 0; j < pci_root_num; j++) { + info = &pci_root_info[j]; + if (info->node == def_node && info->link == def_link) + break; + } + if (j < pci_root_num) { + info = &pci_root_info[j]; + + for (i = 0; i < RANGE_NUM; i++) { + if (!range[i].end) + continue; + + update_res(info, range[i].start, range[i].end, + IORESOURCE_MEM, 1); + } + } + + for (i = 0; i < pci_root_num; i++) { + int res_num; + int busnum; + + info = &pci_root_info[i]; + res_num = info->res_num; + busnum = info->bus_min; + printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n", + info->bus_min, info->bus_max, info->node, info->link); + for (j = 0; j < res_num; j++) { + res = &info->res[j]; + printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n", + busnum, j, + (res->flags & IORESOURCE_IO)?"io port":"mmio", + res->start, res->end); + } + } + + return 0; +} + +postcore_initcall(early_fill_mp_bus_info); diff --git a/arch/x86/pci/k8-bus_64.c b/arch/x86/pci/k8-bus_64.c deleted file mode 100644 index 5c2799c20e47..000000000000 --- a/arch/x86/pci/k8-bus_64.c +++ /dev/null @@ -1,528 +0,0 @@ -#include -#include -#include -#include -#include -#include - -/* - * This discovers the pcibus <-> node mapping on AMD K8. - * also get peer root bus resource for io,mmio - */ - - -/* - * sub bus (transparent) will use entres from 3 to store extra from root, - * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES? - */ -#define RES_NUM 16 -struct pci_root_info { - char name[12]; - unsigned int res_num; - struct resource res[RES_NUM]; - int bus_min; - int bus_max; - int node; - int link; -}; - -/* 4 at this time, it may become to 32 */ -#define PCI_ROOT_NR 4 -static int pci_root_num; -static struct pci_root_info pci_root_info[PCI_ROOT_NR]; - -#ifdef CONFIG_NUMA - -#define BUS_NR 256 - -static int mp_bus_to_node[BUS_NR]; - -void set_mp_bus_to_node(int busnum, int node) -{ - if (busnum >= 0 && busnum < BUS_NR) - mp_bus_to_node[busnum] = node; -} - -int get_mp_bus_to_node(int busnum) -{ - int node = -1; - - if (busnum < 0 || busnum > (BUS_NR - 1)) - return node; - - node = mp_bus_to_node[busnum]; - - /* - * let numa_node_id to decide it later in dma_alloc_pages - * if there is no ram on that node - */ - if (node != -1 && !node_online(node)) - node = -1; - - return node; -} -#endif - -void set_pci_bus_resources_arch_default(struct pci_bus *b) -{ - int i; - int j; - struct pci_root_info *info; - - /* if only one root bus, don't need to anything */ - if (pci_root_num < 2) - return; - - for (i = 0; i < pci_root_num; i++) { - if (pci_root_info[i].bus_min == b->number) - break; - } - - if (i == pci_root_num) - return; - - info = &pci_root_info[i]; - for (j = 0; j < info->res_num; j++) { - struct resource *res; - struct resource *root; - - res = &info->res[j]; - b->resource[j] = res; - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - else - root = &iomem_resource; - insert_resource(root, res); - } -} - -#define RANGE_NUM 16 - -struct res_range { - size_t start; - size_t end; -}; - -static void __init update_range(struct res_range *range, size_t start, - size_t end) -{ - int i; - int j; - - for (j = 0; j < RANGE_NUM; j++) { - if (!range[j].end) - continue; - - if (start <= range[j].start && end >= range[j].end) { - range[j].start = 0; - range[j].end = 0; - continue; - } - - if (start <= range[j].start && end < range[j].end && range[j].start < end + 1) { - range[j].start = end + 1; - continue; - } - - - if (start > range[j].start && end >= range[j].end && range[j].end > start - 1) { - range[j].end = start - 1; - continue; - } - - if (start > range[j].start && end < range[j].end) { - /* find the new spare */ - for (i = 0; i < RANGE_NUM; i++) { - if (range[i].end == 0) - break; - } - if (i < RANGE_NUM) { - range[i].end = range[j].end; - range[i].start = end + 1; - } else { - printk(KERN_ERR "run of slot in ranges\n"); - } - range[j].end = start - 1; - continue; - } - } -} - -static void __init update_res(struct pci_root_info *info, size_t start, - size_t end, unsigned long flags, int merge) -{ - int i; - struct resource *res; - - if (!merge) - goto addit; - - /* try to merge it with old one */ - for (i = 0; i < info->res_num; i++) { - size_t final_start, final_end; - size_t common_start, common_end; - - res = &info->res[i]; - if (res->flags != flags) - continue; - - common_start = max((size_t)res->start, start); - common_end = min((size_t)res->end, end); - if (common_start > common_end + 1) - continue; - - final_start = min((size_t)res->start, start); - final_end = max((size_t)res->end, end); - - res->start = final_start; - res->end = final_end; - return; - } - -addit: - - /* need to add that */ - if (info->res_num >= RES_NUM) - return; - - res = &info->res[info->res_num]; - res->name = info->name; - res->flags = flags; - res->start = start; - res->end = end; - res->child = NULL; - info->res_num++; -} - -struct pci_hostbridge_probe { - u32 bus; - u32 slot; - u32 vendor; - u32 device; -}; - -static struct pci_hostbridge_probe pci_probes[] __initdata = { - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 }, - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, - { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 }, -}; - -static u64 __initdata fam10h_mmconf_start; -static u64 __initdata fam10h_mmconf_end; -static void __init get_pci_mmcfg_amd_fam10h_range(void) -{ - u32 address; - u64 base, msr; - unsigned segn_busn_bits; - - /* assume all cpus from fam10h have mmconf */ - if (boot_cpu_data.x86 < 0x10) - return; - - address = MSR_FAM10H_MMIO_CONF_BASE; - rdmsrl(address, msr); - - /* mmconfig is not enable */ - if (!(msr & FAM10H_MMIO_CONF_ENABLE)) - return; - - base = msr & (FAM10H_MMIO_CONF_BASE_MASK<> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & - FAM10H_MMIO_CONF_BUSRANGE_MASK; - - fam10h_mmconf_start = base; - fam10h_mmconf_end = base + (1ULL<<(segn_busn_bits + 20)) - 1; -} - -/** - * early_fill_mp_bus_to_node() - * called before pcibios_scan_root and pci_scan_bus - * fills the mp_bus_to_cpumask array based according to the LDT Bus Number - * Registers found in the K8 northbridge - */ -static int __init early_fill_mp_bus_info(void) -{ - int i; - int j; - unsigned bus; - unsigned slot; - int found; - int node; - int link; - int def_node; - int def_link; - struct pci_root_info *info; - u32 reg; - struct resource *res; - size_t start; - size_t end; - struct res_range range[RANGE_NUM]; - u64 val; - u32 address; - -#ifdef CONFIG_NUMA - for (i = 0; i < BUS_NR; i++) - mp_bus_to_node[i] = -1; -#endif - - if (!early_pci_allowed()) - return -1; - - found = 0; - for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { - u32 id; - u16 device; - u16 vendor; - - bus = pci_probes[i].bus; - slot = pci_probes[i].slot; - id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); - - vendor = id & 0xffff; - device = (id>>16) & 0xffff; - if (pci_probes[i].vendor == vendor && - pci_probes[i].device == device) { - found = 1; - break; - } - } - - if (!found) - return 0; - - pci_root_num = 0; - for (i = 0; i < 4; i++) { - int min_bus; - int max_bus; - reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2)); - - /* Check if that register is enabled for bus range */ - if ((reg & 7) != 3) - continue; - - min_bus = (reg >> 16) & 0xff; - max_bus = (reg >> 24) & 0xff; - node = (reg >> 4) & 0x07; -#ifdef CONFIG_NUMA - for (j = min_bus; j <= max_bus; j++) - mp_bus_to_node[j] = (unsigned char) node; -#endif - link = (reg >> 8) & 0x03; - - info = &pci_root_info[pci_root_num]; - info->bus_min = min_bus; - info->bus_max = max_bus; - info->node = node; - info->link = link; - sprintf(info->name, "PCI Bus #%02x", min_bus); - pci_root_num++; - } - - /* get the default node and link for left over res */ - reg = read_pci_config(bus, slot, 0, 0x60); - def_node = (reg >> 8) & 0x07; - reg = read_pci_config(bus, slot, 0, 0x64); - def_link = (reg >> 8) & 0x03; - - memset(range, 0, sizeof(range)); - range[0].end = 0xffff; - /* io port resource */ - for (i = 0; i < 4; i++) { - reg = read_pci_config(bus, slot, 1, 0xc0 + (i << 3)); - if (!(reg & 3)) - continue; - - start = reg & 0xfff000; - reg = read_pci_config(bus, slot, 1, 0xc4 + (i << 3)); - node = reg & 0x07; - link = (reg >> 4) & 0x03; - end = (reg & 0xfff000) | 0xfff; - - /* find the position */ - for (j = 0; j < pci_root_num; j++) { - info = &pci_root_info[j]; - if (info->node == node && info->link == link) - break; - } - if (j == pci_root_num) - continue; /* not found */ - - info = &pci_root_info[j]; - printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n", - node, link, (u64)start, (u64)end); - - /* kernel only handle 16 bit only */ - if (end > 0xffff) - end = 0xffff; - update_res(info, start, end, IORESOURCE_IO, 1); - update_range(range, start, end); - } - /* add left over io port range to def node/link, [0, 0xffff] */ - /* find the position */ - for (j = 0; j < pci_root_num; j++) { - info = &pci_root_info[j]; - if (info->node == def_node && info->link == def_link) - break; - } - if (j < pci_root_num) { - info = &pci_root_info[j]; - for (i = 0; i < RANGE_NUM; i++) { - if (!range[i].end) - continue; - - update_res(info, range[i].start, range[i].end, - IORESOURCE_IO, 1); - } - } - - memset(range, 0, sizeof(range)); - /* 0xfd00000000-0xffffffffff for HT */ - range[0].end = (0xfdULL<<32) - 1; - - /* need to take out [0, TOM) for RAM*/ - address = MSR_K8_TOP_MEM1; - rdmsrl(address, val); - end = (val & 0xffffff8000000ULL); - printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20); - if (end < (1ULL<<32)) - update_range(range, 0, end - 1); - - /* get mmconfig */ - get_pci_mmcfg_amd_fam10h_range(); - /* need to take out mmconf range */ - if (fam10h_mmconf_end) { - printk(KERN_DEBUG "Fam 10h mmconf [%llx, %llx]\n", fam10h_mmconf_start, fam10h_mmconf_end); - update_range(range, fam10h_mmconf_start, fam10h_mmconf_end); - } - - /* mmio resource */ - for (i = 0; i < 8; i++) { - reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); - if (!(reg & 3)) - continue; - - start = reg & 0xffffff00; /* 39:16 on 31:8*/ - start <<= 8; - reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); - node = reg & 0x07; - link = (reg >> 4) & 0x03; - end = (reg & 0xffffff00); - end <<= 8; - end |= 0xffff; - - /* find the position */ - for (j = 0; j < pci_root_num; j++) { - info = &pci_root_info[j]; - if (info->node == node && info->link == link) - break; - } - if (j == pci_root_num) - continue; /* not found */ - - info = &pci_root_info[j]; - - printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]", - node, link, (u64)start, (u64)end); - /* - * some sick allocation would have range overlap with fam10h - * mmconf range, so need to update start and end. - */ - if (fam10h_mmconf_end) { - int changed = 0; - u64 endx = 0; - if (start >= fam10h_mmconf_start && - start <= fam10h_mmconf_end) { - start = fam10h_mmconf_end + 1; - changed = 1; - } - - if (end >= fam10h_mmconf_start && - end <= fam10h_mmconf_end) { - end = fam10h_mmconf_start - 1; - changed = 1; - } - - if (start < fam10h_mmconf_start && - end > fam10h_mmconf_end) { - /* we got a hole */ - endx = fam10h_mmconf_start - 1; - update_res(info, start, endx, IORESOURCE_MEM, 0); - update_range(range, start, endx); - printk(KERN_CONT " ==> [%llx, %llx]", (u64)start, endx); - start = fam10h_mmconf_end + 1; - changed = 1; - } - if (changed) { - if (start <= end) { - printk(KERN_CONT " %s [%llx, %llx]", endx?"and":"==>", (u64)start, (u64)end); - } else { - printk(KERN_CONT "%s\n", endx?"":" ==> none"); - continue; - } - } - } - - update_res(info, start, end, IORESOURCE_MEM, 1); - update_range(range, start, end); - printk(KERN_CONT "\n"); - } - - /* need to take out [4G, TOM2) for RAM*/ - /* SYS_CFG */ - address = MSR_K8_SYSCFG; - rdmsrl(address, val); - /* TOP_MEM2 is enabled? */ - if (val & (1<<21)) { - /* TOP_MEM2 */ - address = MSR_K8_TOP_MEM2; - rdmsrl(address, val); - end = (val & 0xffffff8000000ULL); - printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20); - update_range(range, 1ULL<<32, end - 1); - } - - /* - * add left over mmio range to def node/link ? - * that is tricky, just record range in from start_min to 4G - */ - for (j = 0; j < pci_root_num; j++) { - info = &pci_root_info[j]; - if (info->node == def_node && info->link == def_link) - break; - } - if (j < pci_root_num) { - info = &pci_root_info[j]; - - for (i = 0; i < RANGE_NUM; i++) { - if (!range[i].end) - continue; - - update_res(info, range[i].start, range[i].end, - IORESOURCE_MEM, 1); - } - } - - for (i = 0; i < pci_root_num; i++) { - int res_num; - int busnum; - - info = &pci_root_info[i]; - res_num = info->res_num; - busnum = info->bus_min; - printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n", - info->bus_min, info->bus_max, info->node, info->link); - for (j = 0; j < res_num; j++) { - res = &info->res[j]; - printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n", - busnum, j, - (res->flags & IORESOURCE_IO)?"io port":"mmio", - res->start, res->end); - } - } - - return 0; -} - -postcore_initcall(early_fill_mp_bus_info); -- cgit v1.2.3 From 3a27dd1ce5de08e21e0266ddf00e6f1f843bfe8b Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Thu, 12 Jun 2008 20:19:23 +0200 Subject: x86: Move PCI IO ECS code to x86/pci "Form follows function". Code is now where it belongs to. Signed-off-by: Robert Richter Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd.c | 3 --- arch/x86/kernel/cpu/amd_64.c | 4 ---- arch/x86/kernel/cpu/cpu.h | 2 -- arch/x86/kernel/setup.c | 13 ------------- arch/x86/pci/Makefile_32 | 1 + arch/x86/pci/amd_bus.c | 32 ++++++++++++++++++++++++++++++++ arch/x86/pci/direct.c | 16 +++++++++------- arch/x86/pci/pci.h | 1 + include/asm-x86/cpufeature.h | 2 -- 9 files changed, 43 insertions(+), 31 deletions(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index acc891ae5901..81a07ca65d44 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -266,9 +266,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) if (cpu_has_xmm2) set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); - - if (c->x86 == 0x10) - amd_enable_pci_ext_cfg(c); } static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size) diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c index f8d20588bde9..250bfe6064af 100644 --- a/arch/x86/kernel/cpu/amd_64.c +++ b/arch/x86/kernel/cpu/amd_64.c @@ -6,7 +6,6 @@ #include #include -#include "cpu.h" extern int __cpuinit get_model_name(struct cpuinfo_x86 *c); extern void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c); @@ -187,9 +186,6 @@ void __cpuinit init_amd(struct cpuinfo_x86 *c) if (c->x86 == 0x10) fam10h_check_enable_mmcfg(); - if (c->x86 == 0x10) - amd_enable_pci_ext_cfg(c); - if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { unsigned long long tseg; diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index f5d5bb1b5541..40ad1893fe87 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -39,5 +39,3 @@ extern int get_model_name(struct cpuinfo_x86 *c); extern void display_cacheinfo(struct cpuinfo_x86 *c); #endif /* CONFIG_X86_32 */ - -extern void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c); diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 20e14dbef107..6f80b852a196 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -137,16 +137,3 @@ void __init setup_per_cpu_areas(void) } #endif -#define ENABLE_CF8_EXT_CFG (1ULL << 46) - -void __cpuinit amd_enable_pci_ext_cfg(struct cpuinfo_x86 *c) -{ - u64 reg; - rdmsrl(MSR_AMD64_NB_CFG, reg); - if (!(reg & ENABLE_CF8_EXT_CFG)) { - reg |= ENABLE_CF8_EXT_CFG; - wrmsrl(MSR_AMD64_NB_CFG, reg); - } - set_cpu_cap(c, X86_FEATURE_PCI_EXT_CFG); -} - diff --git a/arch/x86/pci/Makefile_32 b/arch/x86/pci/Makefile_32 index 89ec35d00efd..f647e7e56da4 100644 --- a/arch/x86/pci/Makefile_32 +++ b/arch/x86/pci/Makefile_32 @@ -22,3 +22,4 @@ pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o pci-$(CONFIG_NUMA) += mp_bus_to_node.o obj-y += $(pci-y) common.o early.o +obj-y += amd_bus.o diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index 5c2799c20e47..15f505d3a78e 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -1,5 +1,9 @@ #include #include +#include "pci.h" + +#ifdef CONFIG_X86_64 + #include #include #include @@ -526,3 +530,31 @@ static int __init early_fill_mp_bus_info(void) } postcore_initcall(early_fill_mp_bus_info); + +#endif + +/* common 32/64 bit code */ + +#define ENABLE_CF8_EXT_CFG (1ULL << 46) + +static void enable_pci_io_ecs_per_cpu(void *unused) +{ + u64 reg; + rdmsrl(MSR_AMD64_NB_CFG, reg); + if (!(reg & ENABLE_CF8_EXT_CFG)) { + reg |= ENABLE_CF8_EXT_CFG; + wrmsrl(MSR_AMD64_NB_CFG, reg); + } +} + +static int __init enable_pci_io_ecs(void) +{ + /* assume all cpus from fam10h have IO ECS */ + if (boot_cpu_data.x86 < 0x10) + return 0; + on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1, 1); + pci_probe |= PCI_HAS_IO_ECS; + return 0; +} + +postcore_initcall(enable_pci_io_ecs); diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c index 27d61b63def6..9915293500fb 100644 --- a/arch/x86/pci/direct.c +++ b/arch/x86/pci/direct.c @@ -265,14 +265,16 @@ void __init pci_direct_init(int type) type); if (type == 1) { raw_pci_ops = &pci_direct_conf1; - if (!raw_pci_ext_ops && cpu_has_pci_ext_cfg) { - printk(KERN_INFO "PCI: Using configuration type 1 " - "for extended access\n"); - raw_pci_ext_ops = &pci_direct_conf1; - } - } else { - raw_pci_ops = &pci_direct_conf2; + if (raw_pci_ext_ops) + return; + if (!(pci_probe & PCI_HAS_IO_ECS)) + return; + printk(KERN_INFO "PCI: Using configuration type 1 " + "for extended access\n"); + raw_pci_ext_ops = &pci_direct_conf1; + return; } + raw_pci_ops = &pci_direct_conf2; } int __init pci_direct_probe(void) diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h index f3972b12c60a..fd53db50eeeb 100644 --- a/arch/x86/pci/pci.h +++ b/arch/x86/pci/pci.h @@ -27,6 +27,7 @@ #define PCI_CAN_SKIP_ISA_ALIGN 0x8000 #define PCI_USE__CRS 0x10000 #define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000 +#define PCI_HAS_IO_ECS 0x40000 extern unsigned int pci_probe; extern unsigned long pirq_table_addr; diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h index 40fcbba00f15..0d609c837a41 100644 --- a/include/asm-x86/cpufeature.h +++ b/include/asm-x86/cpufeature.h @@ -79,7 +79,6 @@ #define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */ #define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */ #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */ -#define X86_FEATURE_PCI_EXT_CFG (3*32+19) /* PCI extended cfg access */ /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */ #define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */ @@ -188,7 +187,6 @@ extern const char * const x86_power_flags[32]; #define cpu_has_gbpages boot_cpu_has(X86_FEATURE_GBPAGES) #define cpu_has_arch_perfmon boot_cpu_has(X86_FEATURE_ARCH_PERFMON) #define cpu_has_pat boot_cpu_has(X86_FEATURE_PAT) -#define cpu_has_pci_ext_cfg boot_cpu_has(X86_FEATURE_PCI_EXT_CFG) #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64) # define cpu_has_invlpg 1 -- cgit v1.2.3 From dcd32b6a1ffe6c040f8346f7fbaf4318bb8ae41c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 20 Jun 2008 08:18:09 +0200 Subject: x86: make 64-bit identify_cpu use cpu_dev we may need to move some functions to common.c later Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd_64.c | 17 +++++-- arch/x86/kernel/cpu/centaur_64.c | 16 ++++++- arch/x86/kernel/cpu/cpu.h | 6 ++- arch/x86/kernel/cpu/intel_64.c | 15 ++++++- arch/x86/kernel/setup_64.c | 96 +++++++++++++++++++++------------------- 5 files changed, 95 insertions(+), 55 deletions(-) diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c index 250bfe6064af..30b7557c9641 100644 --- a/arch/x86/kernel/cpu/amd_64.c +++ b/arch/x86/kernel/cpu/amd_64.c @@ -7,8 +7,7 @@ #include -extern int __cpuinit get_model_name(struct cpuinfo_x86 *c); -extern void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c); +#include "cpu.h" int force_mwait __cpuinitdata; @@ -109,7 +108,7 @@ static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) #endif } -void __cpuinit early_init_amd(struct cpuinfo_x86 *c) +static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) { early_init_amd_mc(c); @@ -118,7 +117,7 @@ void __cpuinit early_init_amd(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); } -void __cpuinit init_amd(struct cpuinfo_x86 *c) +static void __cpuinit init_amd(struct cpuinfo_x86 *c) { unsigned level; @@ -200,3 +199,13 @@ void __cpuinit init_amd(struct cpuinfo_x86 *c) set_memory_4k((unsigned long)__va(tseg), 1); } } + +static struct cpu_dev amd_cpu_dev __cpuinitdata = { + .c_vendor = "AMD", + .c_ident = { "AuthenticAMD" }, + .c_early_init = early_init_amd, + .c_init = init_amd, +}; + +cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev); + diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c index bac96d187d05..13526fd5cce1 100644 --- a/arch/x86/kernel/cpu/centaur_64.c +++ b/arch/x86/kernel/cpu/centaur_64.c @@ -4,13 +4,15 @@ #include #include -void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) +#include "cpu.h" + +static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) { if (c->x86 == 0x6 && c->x86_model >= 0xf) set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); } -void __cpuinit init_centaur(struct cpuinfo_x86 *c) +static void __cpuinit init_centaur(struct cpuinfo_x86 *c) { /* Cache sizes */ unsigned n; @@ -29,3 +31,13 @@ void __cpuinit init_centaur(struct cpuinfo_x86 *c) } set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); } + +static struct cpu_dev centaur_cpu_dev __cpuinitdata = { + .c_vendor = "Centaur", + .c_ident = { "CentaurHauls" }, + .c_early_init = early_init_centaur, + .c_init = init_centaur, +}; + +cpu_vendor_dev_register(X86_VENDOR_CENTAUR, ¢aur_cpu_dev); + diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index 40ad1893fe87..4d894e8565fe 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -1,4 +1,6 @@ -#ifdef CONFIG_X86_32 +#ifndef ARCH_X86_CPU_H + +#define ARCH_X86_CPU_H struct cpu_model_info { int vendor; @@ -38,4 +40,4 @@ extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[]; extern int get_model_name(struct cpuinfo_x86 *c); extern void display_cacheinfo(struct cpuinfo_x86 *c); -#endif /* CONFIG_X86_32 */ +#endif diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c index b33912199484..fcb1cc9d75ca 100644 --- a/arch/x86/kernel/cpu/intel_64.c +++ b/arch/x86/kernel/cpu/intel_64.c @@ -5,7 +5,9 @@ #include #include -void __cpuinit early_init_intel(struct cpuinfo_x86 *c) +#include "cpu.h" + +static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) { if ((c->x86 == 0xf && c->x86_model >= 0x03) || (c->x86 == 0x6 && c->x86_model >= 0x0e)) @@ -48,7 +50,7 @@ static void __cpuinit srat_detect_node(void) #endif } -void __cpuinit init_intel(struct cpuinfo_x86 *c) +static void __cpuinit init_intel(struct cpuinfo_x86 *c) { /* Cache sizes */ unsigned n; @@ -90,3 +92,12 @@ void __cpuinit init_intel(struct cpuinfo_x86 *c) srat_detect_node(); } + +static struct cpu_dev intel_cpu_dev __cpuinitdata = { + .c_vendor = "Intel", + .c_ident = { "GenuineIntel" }, + .c_early_init = early_init_intel, + .c_init = init_intel, +}; +cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev); + diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 25afdd80a3cf..0cebf953c25a 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -80,6 +80,8 @@ #define ARCH_SETUP #endif +#include "cpu/cpu.h" + /* * Machine setup.. */ @@ -163,6 +165,7 @@ static struct resource bss_resource = { .flags = IORESOURCE_RAM, }; +static void __init early_cpu_init(void); static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c); #ifdef CONFIG_PROC_VMCORE @@ -339,6 +342,7 @@ void __init setup_arch(char **cmdline_p) bss_resource.start = virt_to_phys(&__bss_start); bss_resource.end = virt_to_phys(&__bss_stop)-1; + early_cpu_init(); early_identify_cpu(&boot_cpu_data); strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); @@ -524,6 +528,19 @@ void __init setup_arch(char **cmdline_p) check_enable_amd_mmconf_dmi(); } +struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; + +static void __cpuinit default_init(struct cpuinfo_x86 *c) +{ + display_cacheinfo(c); +} + +static struct cpu_dev __cpuinitdata default_cpu = { + .c_init = default_init, + .c_vendor = "Unknown", +}; +static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; + int __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; @@ -625,24 +642,37 @@ out: static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { char *v = c->x86_vendor_id; - - if (!strcmp(v, "AuthenticAMD")) - c->x86_vendor = X86_VENDOR_AMD; - else if (!strcmp(v, "GenuineIntel")) - c->x86_vendor = X86_VENDOR_INTEL; - else if (!strcmp(v, "CentaurHauls")) - c->x86_vendor = X86_VENDOR_CENTAUR; - else - c->x86_vendor = X86_VENDOR_UNKNOWN; + int i; + static int printed; + + for (i = 0; i < X86_VENDOR_NUM; i++) { + if (cpu_devs[i]) { + if (!strcmp(v, cpu_devs[i]->c_ident[0]) || + (cpu_devs[i]->c_ident[1] && + !strcmp(v, cpu_devs[i]->c_ident[1]))) { + c->x86_vendor = i; + this_cpu = cpu_devs[i]; + return; + } + } + } + if (!printed) { + printed++; + printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); + printk(KERN_ERR "CPU: Your system may be unstable.\n"); + } + c->x86_vendor = X86_VENDOR_UNKNOWN; } -// FIXME: Needs to use cpu_vendor_dev_register -extern void __cpuinit early_init_amd(struct cpuinfo_x86 *c); -extern void __cpuinit init_amd(struct cpuinfo_x86 *c); -extern void __cpuinit early_init_intel(struct cpuinfo_x86 *c); -extern void __cpuinit init_intel(struct cpuinfo_x86 *c); -extern void __cpuinit early_init_centaur(struct cpuinfo_x86 *c); -extern void __cpuinit init_centaur(struct cpuinfo_x86 *c); +static void __init early_cpu_init(void) +{ + struct cpu_vendor_dev *cvdev; + + for (cvdev = __x86cpuvendor_start ; + cvdev < __x86cpuvendor_end ; + cvdev++) + cpu_devs[cvdev->vendor] = cvdev->cpu_dev; +} /* Do some early cpuid on the boot CPU to get some parameter that are needed before check_bugs. Everything advanced is in identify_cpu @@ -722,17 +752,9 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) if (c->extended_cpuid_level >= 0x80000007) c->x86_power = cpuid_edx(0x80000007); - switch (c->x86_vendor) { - case X86_VENDOR_AMD: - early_init_amd(c); - break; - case X86_VENDOR_INTEL: - early_init_intel(c); - break; - case X86_VENDOR_CENTAUR: - early_init_centaur(c); - break; - } + if (c->x86_vendor != X86_VENDOR_UNKNOWN && + cpu_devs[c->x86_vendor]->c_early_init) + cpu_devs[c->x86_vendor]->c_early_init(c); validate_pat_support(c); } @@ -760,24 +782,8 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c) * At the end of this section, c->x86_capability better * indicate the features this CPU genuinely supports! */ - switch (c->x86_vendor) { - case X86_VENDOR_AMD: - init_amd(c); - break; - - case X86_VENDOR_INTEL: - init_intel(c); - break; - - case X86_VENDOR_CENTAUR: - init_centaur(c); - break; - - case X86_VENDOR_UNKNOWN: - default: - display_cacheinfo(c); - break; - } + if (this_cpu->c_init) + this_cpu->c_init(c); detect_ht(c); -- cgit v1.2.3 From c49c412a47b5102516d3313d4eba38cb1e968721 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 19 Jun 2008 15:30:31 -0700 Subject: x86: make 64bit identify_cpu use cpu_dev v2 v2: fix early_panic on this config: http://redhat.com/~mingo/misc/config-Thu_Jun_19_14_22_37_CEST_2008.bad reason : struct cpu_vendor_dev size is 16, need to make table to be 16 byte alignment also print out the cpu supported... Signed-off-by: Yinghai Lu Cc: Dave Jones Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_64.c | 20 ++++++++++++++++++++ arch/x86/kernel/vmlinux_64.lds.S | 1 + 2 files changed, 21 insertions(+) diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 0cebf953c25a..b789ec599923 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -664,6 +664,25 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) c->x86_vendor = X86_VENDOR_UNKNOWN; } +static void __init early_cpu_support_print(void) +{ + int i,j; + struct cpu_dev *cpu_devx; + + printk("KERNEL supported cpus:\n"); + for (i = 0; i < X86_VENDOR_NUM; i++) { + cpu_devx = cpu_devs[i]; + if (!cpu_devx) + continue; + for (j = 0; j < 2; j++) { + if (!cpu_devx->c_ident[j]) + continue; + printk(" %s %s\n", cpu_devx->c_vendor, + cpu_devx->c_ident[j]); + } + } +} + static void __init early_cpu_init(void) { struct cpu_vendor_dev *cvdev; @@ -672,6 +691,7 @@ static void __init early_cpu_init(void) cvdev < __x86cpuvendor_end ; cvdev++) cpu_devs[cvdev->vendor] = cvdev->cpu_dev; + early_cpu_support_print(); } /* Do some early cpuid on the boot CPU to get some parameter that are diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index fad3674b06a5..b29f63bdff5e 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -177,6 +177,7 @@ SECTIONS *(.con_initcall.init) } __con_initcall_end = .; + . = ALIGN(16); __x86cpuvendor_start = .; .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) { *(.x86cpuvendor.init) -- cgit v1.2.3 From ce0c0e50f94e8c55b00a722e8c6e8d6c802be211 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Fri, 2 May 2008 11:46:49 +0200 Subject: x86, generic: CPA add statistics about state of direct mapping v4 Add information about the mapping state of the direct mapping to /proc/meminfo. I chose /proc/meminfo because that is where all the other memory statistics are too and it is a generally useful metric even outside debugging situations. A lot of split kernel pages means the kernel will run slower. This way we can see how many large pages are really used for it and how many are split. Useful for general insight into the kernel. v2: Add hotplug locking to 64bit to plug a very obscure theoretical race. 32bit doesn't need it because it doesn't support hotadd for lowmem. Fix some typos v3: Rename dpages_cnt Add CONFIG ifdef for count update as requested by tglx Expand description v4: Fix stupid bugs added in v3 Move update_page_count to pageattr.c Signed-off-by: Andi Kleen Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/init_32.c | 5 +++++ arch/x86/mm/init_64.c | 7 +++++++ arch/x86/mm/pageattr.c | 35 +++++++++++++++++++++++++++++++++++ fs/proc/proc_misc.c | 7 +++++++ include/asm-x86/pgtable.h | 3 +++ 5 files changed, 57 insertions(+) diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index ec30d10154b6..0269ac230bfa 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -162,6 +162,7 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base) pgd_t *pgd; pmd_t *pmd; pte_t *pte; + unsigned pages_2m = 0, pages_4k = 0; pgd_idx = pgd_index(PAGE_OFFSET); pgd = pgd_base + pgd_idx; @@ -197,6 +198,7 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base) is_kernel_text(addr2)) prot = PAGE_KERNEL_LARGE_EXEC; + pages_2m++; set_pmd(pmd, pfn_pmd(pfn, prot)); pfn += PTRS_PER_PTE; @@ -213,11 +215,14 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base) if (is_kernel_text(addr)) prot = PAGE_KERNEL_EXEC; + pages_4k++; set_pte(pte, pfn_pte(pfn, prot)); } max_pfn_mapped = pfn; } } + update_page_count(PG_LEVEL_2M, pages_2m); + update_page_count(PG_LEVEL_4K, pages_4k); } static inline int page_kills_ppro(unsigned long pagenr) diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 819dad973b13..5e4383859053 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -312,6 +312,8 @@ __meminit void early_iounmap(void *addr, unsigned long size) static unsigned long __meminit phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end) { + unsigned long pages = 0; + int i = pmd_index(address); for (; i < PTRS_PER_PMD; i++, address += PMD_SIZE) { @@ -328,9 +330,11 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end) if (pmd_val(*pmd)) continue; + pages++; set_pte((pte_t *)pmd, pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL_LARGE)); } + update_page_count(PG_LEVEL_2M, pages); return address; } @@ -350,6 +354,7 @@ phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end) static unsigned long __meminit phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end) { + unsigned long pages = 0; unsigned long last_map_addr = end; int i = pud_index(addr); @@ -374,6 +379,7 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end) } if (direct_gbpages) { + pages++; set_pte((pte_t *)pud, pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL_LARGE)); last_map_addr = (addr & PUD_MASK) + PUD_SIZE; @@ -390,6 +396,7 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end) unmap_low_page(pmd); } __flush_tlb_all(); + update_page_count(PG_LEVEL_1G, pages); return last_map_addr >> PAGE_SHIFT; } diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 60bcb5b6a37e..668205bca15e 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -34,6 +34,19 @@ struct cpa_data { unsigned force_split : 1; }; +static unsigned long direct_pages_count[PG_LEVEL_NUM]; + +void __meminit update_page_count(int level, unsigned long pages) +{ +#ifdef CONFIG_PROC_FS + unsigned long flags; + /* Protect against CPA */ + spin_lock_irqsave(&pgd_lock, flags); + direct_pages_count[level] += pages; + spin_unlock_irqrestore(&pgd_lock, flags); +#endif +} + #ifdef CONFIG_X86_64 static inline unsigned long highmap_start_pfn(void) @@ -500,6 +513,12 @@ static int split_large_page(pte_t *kpte, unsigned long address) for (i = 0; i < PTRS_PER_PTE; i++, pfn += pfninc) set_pte(&pbase[i], pfn_pte(pfn, ref_prot)); + if (address >= (unsigned long)__va(0) && + address < (unsigned long)__va(max_pfn_mapped << PAGE_SHIFT)) { + direct_pages_count[level]--; + direct_pages_count[level - 1] += PTRS_PER_PTE; + } + /* * Install the new, split up pagetable. Important details here: * @@ -1029,6 +1048,22 @@ bool kernel_page_present(struct page *page) #endif /* CONFIG_DEBUG_PAGEALLOC */ +#ifdef CONFIG_PROC_FS +int arch_report_meminfo(char *page) +{ + int n; + n = sprintf(page, "DirectMap4k: %8lu\n" + "DirectMap2M: %8lu\n", + direct_pages_count[PG_LEVEL_4K], + direct_pages_count[PG_LEVEL_2M]); +#ifdef CONFIG_X86_64 + n += sprintf(page + n, "DirectMap1G: %8lu\n", + direct_pages_count[PG_LEVEL_1G]); +#endif + return n; +} +#endif + /* * The testcases use internal knowledge of the implementation that shouldn't * be exposed to the rest of the kernel. Include these directly here. diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index 7e277f2ad466..15f7bd41029b 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -123,6 +123,11 @@ static int uptime_read_proc(char *page, char **start, off_t off, return proc_calc_metrics(page, start, off, count, eof, len); } +int __attribute__((weak)) arch_report_meminfo(char *page) +{ + return 0; +} + static int meminfo_read_proc(char *page, char **start, off_t off, int count, int *eof, void *data) { @@ -221,6 +226,8 @@ static int meminfo_read_proc(char *page, char **start, off_t off, len += hugetlb_report_meminfo(page + len); + len += arch_report_meminfo(page + len); + return proc_calc_metrics(page, start, off, count, eof, len); #undef K } diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h index 97c271b2910b..111564fa5e70 100644 --- a/include/asm-x86/pgtable.h +++ b/include/asm-x86/pgtable.h @@ -369,8 +369,11 @@ enum { PG_LEVEL_4K, PG_LEVEL_2M, PG_LEVEL_1G, + PG_LEVEL_NUM }; +void update_page_count(int level, unsigned long pages); + /* * Helper function that returns the kernel pagetable entry controlling * the virtual address 'address'. NULL means no pagetable entry present. -- cgit v1.2.3 From 65280e613fada41704f35709b6c8952ca4b8750c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 5 May 2008 16:35:21 +0200 Subject: x86: janitor CPA statistics patch 1) Remove __meminit from update_pages_count. It is used inside split_pages() 2) Make the code depend on PROC_FS. Doing statistics for nothing is useless and not adding useless code is nice to the Linux tiny folks. Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/pageattr.c | 48 +++++++++++++++++++++++++---------------------- include/asm-x86/pgtable.h | 6 +++++- 2 files changed, 31 insertions(+), 23 deletions(-) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 668205bca15e..0a3f5e047f89 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -34,18 +34,40 @@ struct cpa_data { unsigned force_split : 1; }; +#ifdef CONFIG_PROC_FS static unsigned long direct_pages_count[PG_LEVEL_NUM]; -void __meminit update_page_count(int level, unsigned long pages) +void update_page_count(int level, unsigned long pages) { -#ifdef CONFIG_PROC_FS unsigned long flags; + /* Protect against CPA */ spin_lock_irqsave(&pgd_lock, flags); direct_pages_count[level] += pages; spin_unlock_irqrestore(&pgd_lock, flags); +} + +static void split_page_count(int level) +{ + direct_pages_count[level]--; + direct_pages_count[level - 1] += PTRS_PER_PTE; +} + +int arch_report_meminfo(char *page) +{ + int n = sprintf(page, "DirectMap4k: %8lu\n" + "DirectMap2M: %8lu\n", + direct_pages_count[PG_LEVEL_4K], + direct_pages_count[PG_LEVEL_2M]); +#ifdef CONFIG_X86_64 + n += sprintf(page + n, "DirectMap1G: %8lu\n", + direct_pages_count[PG_LEVEL_1G]); #endif + return n; } +#else +static inline void split_page_count(int level) { } +#endif #ifdef CONFIG_X86_64 @@ -514,10 +536,8 @@ static int split_large_page(pte_t *kpte, unsigned long address) set_pte(&pbase[i], pfn_pte(pfn, ref_prot)); if (address >= (unsigned long)__va(0) && - address < (unsigned long)__va(max_pfn_mapped << PAGE_SHIFT)) { - direct_pages_count[level]--; - direct_pages_count[level - 1] += PTRS_PER_PTE; - } + address < (unsigned long)__va(max_pfn_mapped << PAGE_SHIFT)) + split_page_count(level); /* * Install the new, split up pagetable. Important details here: @@ -1048,22 +1068,6 @@ bool kernel_page_present(struct page *page) #endif /* CONFIG_DEBUG_PAGEALLOC */ -#ifdef CONFIG_PROC_FS -int arch_report_meminfo(char *page) -{ - int n; - n = sprintf(page, "DirectMap4k: %8lu\n" - "DirectMap2M: %8lu\n", - direct_pages_count[PG_LEVEL_4K], - direct_pages_count[PG_LEVEL_2M]); -#ifdef CONFIG_X86_64 - n += sprintf(page + n, "DirectMap1G: %8lu\n", - direct_pages_count[PG_LEVEL_1G]); -#endif - return n; -} -#endif - /* * The testcases use internal knowledge of the implementation that shouldn't * be exposed to the rest of the kernel. Include these directly here. diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h index 111564fa5e70..bd26559dc8e8 100644 --- a/include/asm-x86/pgtable.h +++ b/include/asm-x86/pgtable.h @@ -372,7 +372,11 @@ enum { PG_LEVEL_NUM }; -void update_page_count(int level, unsigned long pages); +#ifdef CONFIG_PROC_FS +extern void update_page_count(int level, unsigned long pages); +#else +static inline void update_page_count(int level, unsigned long pages) { } +#endif /* * Helper function that returns the kernel pagetable entry controlling -- cgit v1.2.3 From 6e92a5a6151f4a467b8c1bde9123c0a9d1a63339 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: x86: add sparse annotations to ioremap arch/x86/mm/ioremap.c:308:11: error: incompatible types in comparison expression (different address spaces) Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/ioremap.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 2b2bb3f9b683..01d76426971d 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -318,8 +318,8 @@ void iounmap(volatile void __iomem *addr) * vm_area and by simply returning an address into the kernel mapping * of ISA space. So handle that here. */ - if (addr >= phys_to_virt(ISA_START_ADDRESS) && - addr < phys_to_virt(ISA_END_ADDRESS)) + if ((void __force *)addr >= phys_to_virt(ISA_START_ADDRESS) && + (void __force *)addr < phys_to_virt(ISA_END_ADDRESS)) return; addr = (volatile void __iomem *) @@ -332,7 +332,7 @@ void iounmap(volatile void __iomem *addr) cpa takes care of the direct mappings. */ read_lock(&vmlist_lock); for (p = vmlist; p; p = p->next) { - if (p->addr == addr) + if (p->addr == (void __force *)addr) break; } read_unlock(&vmlist_lock); @@ -346,7 +346,7 @@ void iounmap(volatile void __iomem *addr) free_memtype(p->phys_addr, p->phys_addr + get_vm_area_size(p)); /* Finally remove it */ - o = remove_vm_area((void *)addr); + o = remove_vm_area((void __force *)addr); BUG_ON(p != o || o == NULL); kfree(p); } @@ -365,7 +365,7 @@ void *xlate_dev_mem_ptr(unsigned long phys) if (page_is_ram(start >> PAGE_SHIFT)) return __va(phys); - addr = (void *)ioremap(start, PAGE_SIZE); + addr = (void __force *)ioremap(start, PAGE_SIZE); if (addr) addr = (void *)((unsigned long)addr | (phys & ~PAGE_MASK)); -- cgit v1.2.3 From 684eb0163a98bc329193b4aa4535cdd705a5dd58 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 12 May 2008 15:43:37 +0200 Subject: x86_64: use PAGE_OFFSET in dump_pagetables Use PAGE_OFFSET macro instead of using 0xffff810000000000UL directly. Signed-off-by: Jiri Slaby Cc: Arjan van de Ven Cc: Andi Kleen Cc: hpa@zytor.com Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/mm/dump_pagetables.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c index 2c24bea92c66..0bb0caed8971 100644 --- a/arch/x86/mm/dump_pagetables.c +++ b/arch/x86/mm/dump_pagetables.c @@ -42,7 +42,7 @@ static struct addr_marker address_markers[] = { { 0, "User Space" }, #ifdef CONFIG_X86_64 { 0x8000000000000000UL, "Kernel Space" }, - { 0xffff810000000000UL, "Low Kernel Mapping" }, + { PAGE_OFFSET, "Low Kernel Mapping" }, { VMALLOC_START, "vmalloc() Area" }, { VMEMMAP_START, "Vmemmap" }, { __START_KERNEL_map, "High Kernel Mapping" }, -- cgit v1.2.3 From a0176e2485ce6468f9b74264a2fd6c19811f027a Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 16 Jun 2008 12:44:17 +0200 Subject: Revert "Revert "x86: fix ioapic bug again"" This reverts commit 0b6a39f7ebcb1c82587ce35b401c513eed41ac5c. The changes in tip/x86/apic solve this better. Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 12 ++++++++++-- arch/x86/kernel/nmi_32.c | 9 +++++++-- 2 files changed, 17 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 4dc8600d9d20..a40d54fc1fdd 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -2130,10 +2130,14 @@ static inline void __init check_timer(void) { int apic1, pin1, apic2, pin2; int vector; + unsigned int ver; unsigned long flags; local_irq_save(flags); + ver = apic_read(APIC_LVR); + ver = GET_APIC_VERSION(ver); + /* * get/set the timer IRQ vector: */ @@ -2146,11 +2150,15 @@ static inline void __init check_timer(void) * mode for the 8259A whenever interrupts are routed * through I/O APICs. Also IRQ0 has to be enabled in * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. + * disabled in the local APIC. Finally timer interrupts + * need to be acknowledged manually in the 8259A for + * timer_interrupt() and for the i82489DX when using + * the NMI watchdog. */ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - timer_ack = 1; + timer_ack = !cpu_has_tsc; + timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); if (timer_over_8254 > 0) enable_8259A_irq(0); diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 84160f74eeb0..11b14bbaa61e 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -26,6 +26,7 @@ #include #include +#include #include "mach_traps.h" @@ -81,7 +82,7 @@ int __init check_nmi_watchdog(void) prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); if (!prev_nmi_count) - return -1; + goto error; printk(KERN_INFO "Testing NMI watchdog ... "); @@ -118,7 +119,7 @@ int __init check_nmi_watchdog(void) if (!atomic_read(&nmi_active)) { kfree(prev_nmi_count); atomic_set(&nmi_active, -1); - return -1; + goto error; } printk("OK.\n"); @@ -129,6 +130,10 @@ int __init check_nmi_watchdog(void) kfree(prev_nmi_count); return 0; +error: + timer_ack = !cpu_has_tsc; + + return -1; } static int __init setup_nmi_watchdog(char *str) -- cgit v1.2.3 From d11d5794e0c21a1054e6cd57381050a999ad7232 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 21 May 2008 22:09:11 +0100 Subject: x86: I/O APIC: AEOI timer acknowledgement clean-ups The code that used to be in do_slow_gettimeoffset() that relied on the IRR bit of the master 8259A PIC for IRQ0 to check the state of the output timer 0 of the PIT is no longer there. As a result, there is no need to use the POLL command to acknowledge the timer interrupt in the "8259A Virtual Wire", except for the NMI watchdog when the i82489DX APIC is used (this is because this particular APIC treats NMIs as level-triggered and keeping the input asserted would keep motherboard NMI sources held off for too long). Remove the unneeded bits and adjust comments accordingly. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 20 +++++++++----------- arch/x86/kernel/io_apic_64.c | 7 ++----- arch/x86/kernel/nmi_32.c | 2 +- arch/x86/kernel/time_32.c | 3 +-- 4 files changed, 13 insertions(+), 19 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index a40d54fc1fdd..c64b3f5cc121 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -2146,19 +2146,17 @@ static inline void __init check_timer(void) set_intr_gate(vector, interrupt[0]); /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O APICs. Also IRQ0 has to be enabled in - * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. Finally timer interrupts - * need to be acknowledged manually in the 8259A for - * timer_interrupt() and for the i82489DX when using - * the NMI watchdog. + * As IRQ0 is to be enabled in the 8259A, the virtual + * wire has to be disabled in the local APIC. Also + * timer interrupts need to be acknowledged manually in + * the 8259A for the i82489DX when using the NMI + * watchdog as that APIC treats NMIs as level-triggered. + * The AEOI mode will finish them in the 8259A + * automatically. */ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - timer_ack = !cpu_has_tsc; - timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); + timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); if (timer_over_8254 > 0) enable_8259A_irq(0); @@ -2219,6 +2217,7 @@ static inline void __init check_timer(void) printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); nmi_watchdog = 0; } + timer_ack = 0; printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); @@ -2237,7 +2236,6 @@ static inline void __init check_timer(void) printk(KERN_INFO "...trying to set up timer as ExtINT IRQ..."); - timer_ack = 0; init_8259A(0); make_8259A_irq(0); apic_write_around(APIC_LVT0, APIC_DM_EXTINT); diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index ef1a8dfcc529..7c34e38e4219 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1669,11 +1669,8 @@ static inline void __init check_timer(void) assign_irq_vector(0, TARGET_CPUS); /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O APICs. Also IRQ0 has to be enabled in - * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. + * As IRQ0 is to be enabled in the 8259A, the virtual + * wire has to be disabled in the local APIC. */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 11b14bbaa61e..d322901c38e6 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -131,7 +131,7 @@ int __init check_nmi_watchdog(void) kfree(prev_nmi_count); return 0; error: - timer_ack = !cpu_has_tsc; + timer_ack = 0; return -1; } diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c index 2ff21f398934..5f29f12da50c 100644 --- a/arch/x86/kernel/time_32.c +++ b/arch/x86/kernel/time_32.c @@ -84,8 +84,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) if (timer_ack) { /* * Subtle, when I/O APICs are used we have to ack timer IRQ - * manually to reset the IRR bit for do_slow_gettimeoffset(). - * This will also deassert NMI lines for the watchdog if run + * manually to deassert NMI lines for the watchdog if run * on an 82489DX-based system. */ spin_lock(&i8259A_lock); -- cgit v1.2.3 From ecd29476ae0143b1c3641edfa76c0fc3e9ad3021 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 21 May 2008 22:09:19 +0100 Subject: x86: I/O APIC: remove parameters to fiddle with the 8259A Remove the "disable_8254_timer" and "enable_8254_timer" kernel parameters. Now that AEOI acknowledgements are no longer needed for correct timer operation, the 8259A can be kept disabled unconditionally unless interrupts, either timer or watchdog ones, are actually passed through it. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/early-quirks.c | 13 ------------- arch/x86/kernel/io_apic_32.c | 21 ++------------------- arch/x86/kernel/io_apic_64.c | 21 ++------------------- include/asm-x86/apic.h | 1 - 4 files changed, 4 insertions(+), 52 deletions(-) diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c index 9f51e1ea9e82..84fd9f2a28ff 100644 --- a/arch/x86/kernel/early-quirks.c +++ b/arch/x86/kernel/early-quirks.c @@ -98,17 +98,6 @@ static void __init nvidia_bugs(int num, int slot, int func) } -static void __init ati_bugs(int num, int slot, int func) -{ -#ifdef CONFIG_X86_IO_APIC - if (timer_over_8254 == 1) { - timer_over_8254 = 0; - printk(KERN_INFO - "ATI board detected. Disabling timer routing over 8254.\n"); - } -#endif -} - #define QFLAG_APPLY_ONCE 0x1 #define QFLAG_APPLIED 0x2 #define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED) @@ -126,8 +115,6 @@ static struct chipset early_qrk[] __initdata = { PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs }, { PCI_VENDOR_ID_VIA, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs }, - { PCI_VENDOR_ID_ATI, PCI_ANY_ID, - PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, ati_bugs }, { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB, PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config }, {} diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index c64b3f5cc121..61cf366d040f 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -58,7 +58,6 @@ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; static DEFINE_SPINLOCK(ioapic_lock); static DEFINE_SPINLOCK(vector_lock); -int timer_over_8254 __initdata = 1; /* * Is the SiS APIC rmw bug present ? @@ -2157,8 +2156,6 @@ static inline void __init check_timer(void) apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); - if (timer_over_8254 > 0) - enable_8259A_irq(0); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); @@ -2175,7 +2172,6 @@ static inline void __init check_timer(void) unmask_IO_APIC_irq(0); if (timer_irq_works()) { if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); setup_nmi(); enable_8259A_irq(0); } @@ -2195,6 +2191,7 @@ static inline void __init check_timer(void) * legacy devices should be connected to IO APIC #0 */ setup_ExtINT_IRQ0_pin(apic2, pin2, vector); + enable_8259A_irq(0); if (timer_irq_works()) { printk("works.\n"); if (pin1 != -1) @@ -2209,6 +2206,7 @@ static inline void __init check_timer(void) /* * Cleanup, just in case ... */ + disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); } printk(" failed.\n"); @@ -2221,7 +2219,6 @@ static inline void __init check_timer(void) printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); - disable_8259A_irq(0); set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq, "fasteoi"); apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ @@ -2292,20 +2289,6 @@ void __init setup_IO_APIC(void) print_IO_APIC(); } -static int __init setup_disable_8254_timer(char *s) -{ - timer_over_8254 = -1; - return 1; -} -static int __init setup_enable_8254_timer(char *s) -{ - timer_over_8254 = 2; - return 1; -} - -__setup("disable_8254_timer", setup_disable_8254_timer); -__setup("enable_8254_timer", setup_enable_8254_timer); - /* * Called after all the initialization is done. If we didnt find any * APIC bugs then we can allow the modify fast path diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 7c34e38e4219..9f16ca4b5a24 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -90,7 +90,6 @@ static int no_timer_check; static int disable_timer_pin_1 __initdata; -int timer_over_8254 __initdata = 1; /* Where if anywhere is the i8259 connect in external int mode */ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; @@ -430,20 +429,6 @@ static int __init disable_timer_pin_setup(char *arg) } __setup("disable_timer_pin_1", disable_timer_pin_setup); -static int __init setup_disable_8254_timer(char *s) -{ - timer_over_8254 = -1; - return 1; -} -static int __init setup_enable_8254_timer(char *s) -{ - timer_over_8254 = 2; - return 1; -} - -__setup("disable_8254_timer", setup_disable_8254_timer); -__setup("enable_8254_timer", setup_enable_8254_timer); - /* * Find the IRQ entry number of a certain pin. @@ -1674,8 +1659,6 @@ static inline void __init check_timer(void) */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - if (timer_over_8254 > 0) - enable_8259A_irq(0); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); @@ -1693,7 +1676,6 @@ static inline void __init check_timer(void) if (!no_timer_check && timer_irq_works()) { nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); setup_nmi(); enable_8259A_irq(0); } @@ -1715,6 +1697,7 @@ static inline void __init check_timer(void) * legacy devices should be connected to IO APIC #0 */ setup_ExtINT_IRQ0_pin(apic2, pin2, cfg->vector); + enable_8259A_irq(0); if (timer_irq_works()) { apic_printk(APIC_VERBOSE," works.\n"); nmi_watchdog_default(); @@ -1726,6 +1709,7 @@ static inline void __init check_timer(void) /* * Cleanup, just in case ... */ + disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); } apic_printk(APIC_VERBOSE," failed.\n"); @@ -1737,7 +1721,6 @@ static inline void __init check_timer(void) apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); - disable_8259A_irq(0); irq_desc[0].chip = &lapic_irq_type; apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ enable_8259A_irq(0); diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h index be9639a9a186..9c2dfd926e59 100644 --- a/include/asm-x86/apic.h +++ b/include/asm-x86/apic.h @@ -36,7 +36,6 @@ extern void generic_apic_probe(void); #ifdef CONFIG_X86_LOCAL_APIC extern int apic_verbosity; -extern int timer_over_8254; extern int local_apic_timer_c2_ok; extern int local_apic_timer_disabled; -- cgit v1.2.3 From e67465f1298671266a8e824c1751afdb7c08c860 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 21 May 2008 22:09:26 +0100 Subject: x86: I/O APIC: clean up after a fasteoi failure Disable the 8259A when routing of the timer interrupt through the chip to the local APIC of the primary processor has failed. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 1 + arch/x86/kernel/io_apic_64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 61cf366d040f..e7b7655c4e94 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -2228,6 +2228,7 @@ static inline void __init check_timer(void) printk(" works.\n"); goto out; } + disable_8259A_irq(0); apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); printk(" failed.\n"); diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 9f16ca4b5a24..6433fc99f1f9 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1729,6 +1729,7 @@ static inline void __init check_timer(void) apic_printk(APIC_VERBOSE," works.\n"); goto out; } + disable_8259A_irq(0); apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); apic_printk(APIC_VERBOSE," failed.\n"); -- cgit v1.2.3 From 60134ebe795b728dbb960485a8e873c3250ada36 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 21 May 2008 22:09:34 +0100 Subject: x86: I/O APIC: keep IRQ off when changing LVT registers Disable the 8259A acting in the "virtual wire" mode to keep the interrupt line inactive while fiddling with local APIC interrupt vector registers associated with its destination inputs. To be on the safe side, especially concerning flipping the trigger mode. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 2 ++ arch/x86/kernel/io_apic_64.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index e7b7655c4e94..41218ac75d10 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -2199,7 +2199,9 @@ static inline void __init check_timer(void) else add_pin_to_irq(0, apic2, pin2); if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); setup_nmi(); + enable_8259A_irq(0); } goto out; } diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 6433fc99f1f9..aa45a85c4d11 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1702,7 +1702,9 @@ static inline void __init check_timer(void) apic_printk(APIC_VERBOSE," works.\n"); nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { + disable_8259A_irq(0); setup_nmi(); + enable_8259A_irq(0); } goto out; } -- cgit v1.2.3 From 73d08e636026bbcb413d4864ca5e917502f8a0f9 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 21 May 2008 22:09:43 +0100 Subject: x86: APIC/SMP: correct the message for "nosmp" The local APIC is no longer forced off when "nosmp" has been specified. Correct the message printed. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 3e1cecedde42..8c53d86e3e86 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1157,8 +1157,7 @@ static int __init smp_sanity_check(unsigned max_cpus) * If SMP should be disabled, then really disable it! */ if (!max_cpus) { - printk(KERN_INFO "SMP mode deactivated," - "forcing use of dummy APIC emulation.\n"); + printk(KERN_INFO "SMP mode deactivated.\n"); smpboot_clear_io_apic(); #ifdef CONFIG_X86_32 connect_bsp_APIC(); -- cgit v1.2.3 From a1133d8e4ffc2db751eb987a2f3cf8ead67927c3 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 21 May 2008 22:10:16 +0100 Subject: x86: APIC/SMP: downgrade the NMI watchdog for "nosmp" If configured to use the I/O APIC, the NMI watchdog is deemed to fail if the chip has been deactivated as a result of "nosmp". Downgrade to the local APIC watchdog similarly to what is done for the UP case. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 8c53d86e3e86..df60bc7c9cb7 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1159,6 +1159,10 @@ static int __init smp_sanity_check(unsigned max_cpus) if (!max_cpus) { printk(KERN_INFO "SMP mode deactivated.\n"); smpboot_clear_io_apic(); + + if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED) + nmi_watchdog = NMI_LOCAL_APIC; + #ifdef CONFIG_X86_32 connect_bsp_APIC(); #endif -- cgit v1.2.3 From 35542c5ebced864776d90d83d1e255016fd4c084 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 21 May 2008 22:10:22 +0100 Subject: x86: I/O APIC: clean up the 8259A on a NMI watchdog failure There is no point in keeping the 8259A enabled if the I/O APIC NMI watchdog has failed and the 8259A is not used to pass through regular timer interrupts. This fixes problems with some systems where some logic gets confused. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 2 ++ arch/x86/kernel/io_apic_64.c | 2 ++ arch/x86/kernel/nmi_32.c | 4 ++++ arch/x86/kernel/nmi_64.c | 11 +++++++++-- include/asm-x86/io_apic.h | 4 ++++ 5 files changed, 21 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 41218ac75d10..7c7d88ebb966 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -58,6 +58,7 @@ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; static DEFINE_SPINLOCK(ioapic_lock); static DEFINE_SPINLOCK(vector_lock); +int timer_through_8259 __initdata; /* * Is the SiS APIC rmw bug present ? @@ -2194,6 +2195,7 @@ static inline void __init check_timer(void) enable_8259A_irq(0); if (timer_irq_works()) { printk("works.\n"); + timer_through_8259 = 1; if (pin1 != -1) replace_pin_at_irq(0, apic1, pin1, apic2, pin2); else diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index aa45a85c4d11..2a60bfb7446f 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -90,6 +90,7 @@ static int no_timer_check; static int disable_timer_pin_1 __initdata; +int timer_through_8259 __initdata; /* Where if anywhere is the i8259 connect in external int mode */ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; @@ -1700,6 +1701,7 @@ static inline void __init check_timer(void) enable_8259A_irq(0); if (timer_irq_works()) { apic_printk(APIC_VERBOSE," works.\n"); + timer_through_8259 = 1; nmi_watchdog_default(); if (nmi_watchdog == NMI_IO_APIC) { disable_8259A_irq(0); diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index d322901c38e6..6580dae46277 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -24,6 +24,8 @@ #include #include +#include +#include #include #include #include @@ -131,6 +133,8 @@ int __init check_nmi_watchdog(void) kfree(prev_nmi_count); return 0; error: + if (nmi_watchdog == NMI_IO_APIC && !timer_through_8259) + disable_8259A_irq(0); timer_ack = 0; return -1; diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 5a29ded994fa..0060e44e8989 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -21,6 +21,8 @@ #include #include +#include +#include #include #include #include @@ -90,7 +92,7 @@ int __init check_nmi_watchdog(void) prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); if (!prev_nmi_count) - return -1; + goto error; printk(KERN_INFO "Testing NMI watchdog ... "); @@ -121,7 +123,7 @@ int __init check_nmi_watchdog(void) if (!atomic_read(&nmi_active)) { kfree(prev_nmi_count); atomic_set(&nmi_active, -1); - return -1; + goto error; } printk("OK.\n"); @@ -132,6 +134,11 @@ int __init check_nmi_watchdog(void) kfree(prev_nmi_count); return 0; +error: + if (nmi_watchdog == NMI_IO_APIC && !timer_through_8259) + disable_8259A_irq(0); + + return -1; } static int __init setup_nmi_watchdog(char *str) diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h index d593e14f0341..a6732566ad05 100644 --- a/include/asm-x86/io_apic.h +++ b/include/asm-x86/io_apic.h @@ -137,6 +137,9 @@ extern int sis_apic_bug; /* 1 if "noapic" boot option passed */ extern int skip_ioapic_setup; +/* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */ +extern int timer_through_8259; + static inline void disable_ioapic_setup(void) { skip_ioapic_setup = 1; @@ -162,6 +165,7 @@ extern void ioapic_init_mappings(void); #else /* !CONFIG_X86_IO_APIC */ #define io_apic_assign_pci_irqs 0 +static const int timer_through_8259 = 0; #endif #endif -- cgit v1.2.3 From 9a1c61929121cbd597a5575f82711c0db8ee1778 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 27 May 2008 21:19:09 +0100 Subject: x86: I/O APIC: fix the name of the L-APIC IRQ handler The local APIC interrupt handler gets registered with set_irq_chip_and_handler_name(), which results in "local-APIC-edge-fasteoi" reported as the name of the handler. Fix by removing the type of the handler left over from before the generic handlers were introduced. The 64-bit variation should get fixed with the upcoming merge. NB It should really use the "edge" handler and not the "fasteoi" one, but that's a separate issue. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 7c7d88ebb966..7064500f00f2 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -2037,7 +2037,7 @@ static void unmask_lapic_irq (unsigned int irq) } static struct irq_chip lapic_chip __read_mostly = { - .name = "local-APIC-edge", + .name = "local-APIC", .mask = mask_lapic_irq, .unmask = unmask_lapic_irq, .eoi = ack_apic, -- cgit v1.2.3 From f08252623c7981f5cea70e4fab4983a94fc52212 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 27 May 2008 21:19:16 +0100 Subject: x86: I/O APIC: fix the name of the through-8259A handler When the through-8259A mode is used for the timer, the call to set_irq_handler() will register a NULL handler name, resulting in "IO-APIC-" reported. Fix by calling ioapic_register_intr() as done for all the other I/O APIC interrupts. The 64-bit variation calls set_irq_chip_and_handler_name() here needlessly and should get fixed with the upcoming merge. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 7064500f00f2..c93c0d3c1a6b 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -1331,8 +1331,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in * The timer IRQ doesn't have to know that behind the * scene we have a 8259A-master in AEOI mode ... */ - irq_desc[0].chip = &ioapic_chip; - set_irq_handler(0, handle_edge_irq); + ioapic_register_intr(0, vector, IOAPIC_EDGE); /* * Add it to the IO-APIC irq-routing table: -- cgit v1.2.3 From 80d16bace63e057d30337e48d70aef0881656457 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 27 May 2008 21:19:22 +0100 Subject: x86: I/O APIC: remove redundant 8259A {,un}masking For a better control the masking and unmasking of the timer interrupt line in the 8259A operating in the 'Virtual Wire' mode has been moved out of setup_ExtINT_IRQ0_pin() now, so remove the redundant calls from the function. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 4 ---- arch/x86/kernel/io_apic_64.c | 4 ---- 2 files changed, 8 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index c93c0d3c1a6b..6e743ecf863b 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -1310,8 +1310,6 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in memset(&entry,0,sizeof(entry)); - disable_8259A_irq(0); - /* mask LVT0 */ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); @@ -1337,8 +1335,6 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in * Add it to the IO-APIC irq-routing table: */ ioapic_write_entry(apic, pin, entry); - - enable_8259A_irq(0); } void __init print_IO_APIC(void) diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 2a60bfb7446f..83d4e117746b 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -906,8 +906,6 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in memset(&entry, 0, sizeof(entry)); - disable_8259A_irq(0); - /* mask LVT0 */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); @@ -933,8 +931,6 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in * Add it to the IO-APIC irq-routing table: */ ioapic_write_entry(apic, pin, entry); - - enable_8259A_irq(0); } void __apicdebuginit print_IO_APIC(void) -- cgit v1.2.3 From 6b4722a7779ebadcf016fd96ce3156b6acda8a31 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 27 May 2008 21:19:28 +0100 Subject: x86: I/O APIC: remove redundant LVT0 masking The LINT0 line of the local APIC is masked in the LVT0 entry in check_timer() before this function is ever called. Removed the redundant unmasking for better control. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 3 --- arch/x86/kernel/io_apic_64.c | 3 --- 2 files changed, 6 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 6e743ecf863b..51e5519ee1a7 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -1310,9 +1310,6 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in memset(&entry,0,sizeof(entry)); - /* mask LVT0 */ - apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); - /* * We use logical delivery to get the timer IRQ * to the first CPU. diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 83d4e117746b..565f19b01bf4 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -906,9 +906,6 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in memset(&entry, 0, sizeof(entry)); - /* mask LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); - /* * We use logical delivery to get the timer IRQ * to the first CPU. -- cgit v1.2.3 From f7633ce55b2ea2926a39d7ca9d0bb06c43edd2c2 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 27 May 2008 21:19:34 +0100 Subject: x86: I/O APIC: rename setup_ExtINT_IRQ0_pin() Rename setup_ExtINT_IRQ0_pin() to setup_timer_IRQ0_pin() to better reflect the upcoming role of a function setting up a (semi-)arbitrary I/O APIC pin appropriately for the 8254 timer. By "appropriate" the following settings are meant: edge-triggered, active-high, all the other settings per-architecture. Adjust comments to reflect code appropriately. No functional changes. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 9 +++++---- arch/x86/kernel/io_apic_64.c | 10 +++++----- 2 files changed, 10 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 51e5519ee1a7..ce682e873aa7 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -1302,9 +1302,10 @@ static void __init setup_IO_APIC_irqs(void) } /* - * Set up the 8259A-master output pin: + * Set up the timer pin, possibly with the 8259A-master behind. */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) +static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, + int vector) { struct IO_APIC_route_entry entry; @@ -1324,7 +1325,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in /* * The timer IRQ doesn't have to know that behind the - * scene we have a 8259A-master in AEOI mode ... + * scene we may have a 8259A-master in AEOI mode ... */ ioapic_register_intr(0, vector, IOAPIC_EDGE); @@ -2183,7 +2184,7 @@ static inline void __init check_timer(void) /* * legacy devices should be connected to IO APIC #0 */ - setup_ExtINT_IRQ0_pin(apic2, pin2, vector); + setup_timer_IRQ0_pin(apic2, pin2, vector); enable_8259A_irq(0); if (timer_irq_works()) { printk("works.\n"); diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 565f19b01bf4..6c4635fa97a6 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -897,10 +897,10 @@ static void __init setup_IO_APIC_irqs(void) } /* - * Set up the 8259A-master output pin as broadcast to all - * CPUs. + * Set up the timer pin, possibly with the 8259A-master behind. */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) +static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, + int vector) { struct IO_APIC_route_entry entry; @@ -920,7 +920,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in /* * The timer IRQ doesn't have to know that behind the - * scene we have a 8259A-master in AEOI mode ... + * scene we may have a 8259A-master in AEOI mode ... */ set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge"); @@ -1690,7 +1690,7 @@ static inline void __init check_timer(void) /* * legacy devices should be connected to IO APIC #0 */ - setup_ExtINT_IRQ0_pin(apic2, pin2, cfg->vector); + setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); enable_8259A_irq(0); if (timer_irq_works()) { apic_printk(APIC_VERBOSE," works.\n"); -- cgit v1.2.3 From 24742ece8eb01b5855059020ba1c09173fd9b732 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 27 May 2008 21:19:40 +0100 Subject: x86: I/O APIC: unmask the second-chance timer interrupt Unmask the timer interrupt line set up in the through-8259A mode explicitly after setup_timer_IRQ0_pin() has set up the I/O APIC interrupt redirection entry to let the two operations be unbound from each other. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 1 + arch/x86/kernel/io_apic_64.c | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index ce682e873aa7..b381f93b79ae 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -2185,6 +2185,7 @@ static inline void __init check_timer(void) * legacy devices should be connected to IO APIC #0 */ setup_timer_IRQ0_pin(apic2, pin2, vector); + unmask_IO_APIC_irq(0); enable_8259A_irq(0); if (timer_irq_works()) { printk("works.\n"); diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 6c4635fa97a6..0e20b7d7c1c7 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1691,6 +1691,7 @@ static inline void __init check_timer(void) * legacy devices should be connected to IO APIC #0 */ setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); + unmask_IO_APIC_irq(0); enable_8259A_irq(0); if (timer_irq_works()) { apic_printk(APIC_VERBOSE," works.\n"); -- cgit v1.2.3 From 03be750559b2fe20d85dd968e08d5fe1c3accf83 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 27 May 2008 21:19:45 +0100 Subject: x86: I/O APIC: keep the timer IRQ masked during set-up Keep the timer interrupt line masked when reconfiguring its interrupt redirection entry in the I/O APIC. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 2 +- arch/x86/kernel/io_apic_64.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index b381f93b79ae..63a2f64c765b 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -1316,7 +1316,7 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, * to the first CPU. */ entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* unmask IRQ now */ + entry.mask = 1; /* mask IRQ now */ entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 0e20b7d7c1c7..ae0ac990574f 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -911,7 +911,7 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, * to the first CPU. */ entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* unmask IRQ now */ + entry.mask = 1; /* mask IRQ now */ entry.dest = cpu_mask_to_apicid(TARGET_CPUS); entry.delivery_mode = INT_DELIVERY_MODE; entry.polarity = 0; -- cgit v1.2.3 From 691874fa96d6349a8b60f8ea9c2bae52ece79941 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 27 May 2008 21:19:51 +0100 Subject: x86: I/O APIC: timer through 8259A second-chance Some systems incorrectly report the ExtINTA pin of the I/O APIC as the genuine target of the timer interrupt. Here is a change that copies timer pin information found to the other pin if one has been found only. This way both a direct and a through-8259A route is tested with the pin letting these problematic systems work well enough. If no timer pin information has been found for the I/O APIC, then local APIC variations are tried only, similarly to what is done without the change (except without the misleading messages). Obviously if we try the first-chance path without being told by the BIOS to do so, we should not complain either, so do not print the message in this case. The 64-bit variation should be updated with a call to replace_pin_at_irq() which can be done with the upcoming merge. Since add_pin_to_irq() is now always called in the first-chance path, the condition to require it in the second-chance path no longer happens. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 38 ++++++++++++++++++++++++++++---------- arch/x86/kernel/io_apic_64.c | 36 +++++++++++++++++++++++++++++------- 2 files changed, 57 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 63a2f64c765b..a69a59d19e18 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -2122,6 +2122,7 @@ static inline void __init unlock_ExtINT_logic(void) static inline void __init check_timer(void) { int apic1, pin1, apic2, pin2; + int no_pin1 = 0; int vector; unsigned int ver; unsigned long flags; @@ -2159,10 +2160,30 @@ static inline void __init check_timer(void) printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", vector, apic1, pin1, apic2, pin2); + /* + * Some BIOS writers are clueless and report the ExtINTA + * I/O APIC input from the cascaded 8259A as the timer + * interrupt input. So just in case, if only one pin + * was found above, try it both directly and through the + * 8259A. + */ + if (pin1 == -1) { + pin1 = pin2; + apic1 = apic2; + no_pin1 = 1; + } else if (pin2 == -1) { + pin2 = pin1; + apic2 = apic1; + } + if (pin1 != -1) { /* * Ok, does IRQ0 through the IOAPIC work? */ + if (no_pin1) { + add_pin_to_irq(0, apic1, pin1); + setup_timer_IRQ0_pin(apic1, pin1, vector); + } unmask_IO_APIC_irq(0); if (timer_irq_works()) { if (nmi_watchdog == NMI_IO_APIC) { @@ -2174,26 +2195,23 @@ static inline void __init check_timer(void) goto out; } clear_IO_APIC_pin(apic1, pin1); - printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to " - "IO-APIC\n"); - } + if (!no_pin1) + printk(KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); - printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... "); - if (pin2 != -1) { + printk(KERN_INFO "...trying to set up timer (IRQ0) " + "through the 8259A ... "); printk("\n..... (found pin %d) ...", pin2); /* * legacy devices should be connected to IO APIC #0 */ + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); setup_timer_IRQ0_pin(apic2, pin2, vector); unmask_IO_APIC_irq(0); enable_8259A_irq(0); if (timer_irq_works()) { printk("works.\n"); timer_through_8259 = 1; - if (pin1 != -1) - replace_pin_at_irq(0, apic1, pin1, apic2, pin2); - else - add_pin_to_irq(0, apic2, pin2); if (nmi_watchdog == NMI_IO_APIC) { disable_8259A_irq(0); setup_nmi(); @@ -2206,8 +2224,8 @@ static inline void __init check_timer(void) */ disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); + printk(" failed.\n"); } - printk(" failed.\n"); if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index ae0ac990574f..9a54b779abd4 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1638,6 +1638,7 @@ static inline void __init check_timer(void) struct irq_cfg *cfg = irq_cfg + 0; int apic1, pin1, apic2, pin2; unsigned long flags; + int no_pin1 = 0; local_irq_save(flags); @@ -1662,10 +1663,30 @@ static inline void __init check_timer(void) apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", cfg->vector, apic1, pin1, apic2, pin2); + /* + * Some BIOS writers are clueless and report the ExtINTA + * I/O APIC input from the cascaded 8259A as the timer + * interrupt input. So just in case, if only one pin + * was found above, try it both directly and through the + * 8259A. + */ + if (pin1 == -1) { + pin1 = pin2; + apic1 = apic2; + no_pin1 = 1; + } else if (pin2 == -1) { + pin2 = pin1; + apic2 = apic1; + } + if (pin1 != -1) { /* * Ok, does IRQ0 through the IOAPIC work? */ + if (no_pin1) { + add_pin_to_irq(0, apic1, pin1); + setup_timer_IRQ0_pin(apic1, pin1, vector); + } unmask_IO_APIC_irq(0); if (!no_timer_check && timer_irq_works()) { nmi_watchdog_default(); @@ -1678,18 +1699,19 @@ static inline void __init check_timer(void) goto out; } clear_IO_APIC_pin(apic1, pin1); - apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not " - "connected to IO-APIC\n"); - } + if (!no_pin1) + apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); - apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) " - "through the 8259A ... "); - if (pin2 != -1) { + apic_printk(APIC_VERBOSE,KERN_INFO + "...trying to set up timer (IRQ0) " + "through the 8259A ... "); apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...", apic2, pin2); /* * legacy devices should be connected to IO APIC #0 */ + /* replace_pin_at_irq(0, apic1, pin1, apic2, pin2); */ setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); unmask_IO_APIC_irq(0); enable_8259A_irq(0); @@ -1709,8 +1731,8 @@ static inline void __init check_timer(void) */ disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); + apic_printk(APIC_VERBOSE," failed.\n"); } - apic_printk(APIC_VERBOSE," failed.\n"); if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); -- cgit v1.2.3 From 071565095897dff9668cd4a2343160ae31538c27 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:37 +0200 Subject: x86: move pci_routirq declaration to pci.h Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/pci/acpi.c | 1 - include/asm-x86/pci.h | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index d95de2f199cd..464279da49c4 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -218,7 +218,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do return bus; } -extern int pci_routeirq; static int __init pci_acpi_init(void) { struct pci_dev *dev = NULL; diff --git a/include/asm-x86/pci.h b/include/asm-x86/pci.h index 30bbde0cb34b..2db14cf17db8 100644 --- a/include/asm-x86/pci.h +++ b/include/asm-x86/pci.h @@ -18,6 +18,8 @@ struct pci_sysdata { #endif }; +extern int pci_routeirq; + /* scan a bus after allocating a pci_sysdata for it */ extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node); -- cgit v1.2.3 From 7223daf5e1a6298e459db84442adc04d68a6a42d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: x86: make irq_cfg static Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 9a54b779abd4..bb3033f037c3 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -61,7 +61,7 @@ struct irq_cfg { }; /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ -struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { +static struct irq_cfg irq_cfg[NR_IRQS] __read_mostly = { [0] = { .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR, }, [1] = { .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR, }, [2] = { .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR, }, -- cgit v1.2.3 From 431ee79db0a9552314d787446044973a8176b57d Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:35 +0200 Subject: x86: apic_64.c fix sparse warnings about shadowed variables Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic_64.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 0633cfd0dc29..07fda23a9f76 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -875,7 +875,7 @@ static int __init detect_init_APIC(void) void __init early_init_lapic_mapping(void) { - unsigned long apic_phys; + unsigned long phys_addr; /* * If no local APIC can be found then go out @@ -884,11 +884,11 @@ void __init early_init_lapic_mapping(void) if (!smp_found_config) return; - apic_phys = mp_lapic_addr; + phys_addr = mp_lapic_addr; - set_fixmap_nocache(FIX_APIC_BASE, apic_phys); + set_fixmap_nocache(FIX_APIC_BASE, phys_addr); apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", - APIC_BASE, apic_phys); + APIC_BASE, phys_addr); /* * Fetch the APIC ID of the BSP in case we have a -- cgit v1.2.3 From b1b57ee135ac7614184faa7d7345b5e7098cb81d Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sat, 31 May 2008 12:20:10 +0200 Subject: x86 build fix: arch/x86/kernel/io_apic_64.c: In function 'check_timer': arch/x86/kernel/io_apic_64.c:1688: error: 'vector' undeclared (first use in this function) arch/x86/kernel/io_apic_64.c:1688: error: (Each undeclared identifier is reported only once arch/x86/kernel/io_apic_64.c:1688: error: for each function it appears in.) --- arch/x86/kernel/io_apic_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index bb3033f037c3..8991567c76b7 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1685,7 +1685,7 @@ static inline void __init check_timer(void) */ if (no_pin1) { add_pin_to_irq(0, apic1, pin1); - setup_timer_IRQ0_pin(apic1, pin1, vector); + setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); } unmask_IO_APIC_irq(0); if (!no_timer_check && timer_irq_works()) { -- cgit v1.2.3 From 067fa0ff0c89d25c2136ed095c72213089d4bb4e Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Thu, 29 May 2008 22:32:30 +0400 Subject: x86: IO-APIC - use NMI_NONE instead of numeric constant Not sure but maybe it is better to use NMI_DISABLED, will take a look. But for now this patch is not change anything in logic so it will not hurt/broke the kernel. For most cases nmi_watchdog assignment is by one of NMI_* macro so I think there it make sense too. Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 2 +- arch/x86/kernel/io_apic_64.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index a69a59d19e18..5c0f8d6496a6 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -2229,7 +2229,7 @@ static inline void __init check_timer(void) if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = 0; + nmi_watchdog = NMI_NONE; } timer_ack = 0; diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 8991567c76b7..40a184d4dff8 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1736,7 +1736,7 @@ static inline void __init check_timer(void) if (nmi_watchdog == NMI_IO_APIC) { printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = 0; + nmi_watchdog = NMI_NONE; } apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); -- cgit v1.2.3 From ff11571b25152edfb1eb0e6feb7e0009670fe4a5 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 5 Jun 2008 11:17:16 +0200 Subject: x86, io-apic: fix nmi_watchdog=1 bootup hang nmi_watchdog=1 hangs on 64-bit: [ 0.250000] Detected 12.564 MHz APIC timer. [ 0.254178] APIC timer registered as dummy, due to nmi_watchdog=1! [ 0.260366] Testing NMI watchdog ... <4>WARNING: CPU#0: NMI appears to be stuck (0->0)! [ ... ] [ 0.470003] calling genl_init+0x0/0xd0 [ hard hang ] bisected it down to: git-bisect start git-bisect good 1beee8dc8cf58e3f605bd7b34d7a39939be7d8d2 git-bisect bad 11582ece0aaa2d0f94f345c08a4ab9997078a083 git-bisect bad 5479c623bb44089844022c03d4c0eb16d5b7a15f git-bisect bad cfb4c7fabeb499e1c29f9d1878968e37a938e28a git-bisect good 246dd412d31e4f5de1d43aa6422a325b785f36e4 git-bisect bad 3f8237eaff7dc1e35fa791dae095574fd974e671 git-bisect good 90e23b13ab849e2a11f00c655eb3a2011b4623be git-bisect bad 833526a34eeefc117df3191a594c3c3a4f15a9ac git-bisect good 791b93d3dfaf16c23e978bec0cc0a3dd9d855d63 git-bisect bad 65767c64068f2c93e56a1accfed5c78230ac12d7 git-bisect bad 2abc5c05dd82c188e3bdf6641a274f013348d14b git-bisect bad 317e1f2597ffb4d4db940577bbe56dc6e881ef07 | 317e1f2597ffb4d4db940577bbe56dc6e881ef07 is first bad commit | commit 317e1f2597ffb4d4db940577bbe56dc6e881ef07 | Author: Maciej W. Rozycki | Date: Wed May 21 22:10:22 2008 +0100 | x86: I/O APIC: clean up the 8259A on a NMI watchdog failure the problem is that in the dummy-lapic branch we rely on the i8259A but if the NMI watchdog fails we turn off IRQ 0 - which doesnt work too well ;-) Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic_32.c | 6 ++++-- arch/x86/kernel/apic_64.c | 6 ++++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6c..3cebf91d500f 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -541,11 +541,13 @@ void __init setup_boot_APIC_clock(void) * PIT/HPET going. Otherwise register lapic as a dummy * device. */ - if (nmi_watchdog != NMI_IO_APIC) + if (nmi_watchdog != NMI_IO_APIC) { lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; - else + } else { printk(KERN_WARNING "APIC timer registered as dummy," " due to nmi_watchdog=1!\n"); + timer_through_8259 = 1; + } } /* Setup the lapic or request the broadcast */ diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 07fda23a9f76..6cbc668a4c63 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -413,11 +413,13 @@ void __init setup_boot_APIC_clock(void) * PIT/HPET going. Otherwise register lapic as a dummy * device. */ - if (nmi_watchdog != NMI_IO_APIC) + if (nmi_watchdog != NMI_IO_APIC) { lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; - else + } else { printk(KERN_WARNING "APIC timer registered as dummy," " due to nmi_watchdog=1!\n"); + timer_through_8259 = 1; + } setup_APIC_timer(); } -- cgit v1.2.3 From ab5a5be099cb20a1c006bf0e211c48502d7ebc44 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 8 Jun 2008 10:13:33 +0200 Subject: Revert "x86, io-apic: fix nmi_watchdog=1 bootup hang" This reverts commit 2229ff84f01746d02fb6b79e156fb5cce48c908f. A better fix from Maciej will be merged. --- arch/x86/kernel/apic_32.c | 6 ++---- arch/x86/kernel/apic_64.c | 6 ++---- 2 files changed, 4 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 3cebf91d500f..4b99b1bdeb6c 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -541,13 +541,11 @@ void __init setup_boot_APIC_clock(void) * PIT/HPET going. Otherwise register lapic as a dummy * device. */ - if (nmi_watchdog != NMI_IO_APIC) { + if (nmi_watchdog != NMI_IO_APIC) lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; - } else { + else printk(KERN_WARNING "APIC timer registered as dummy," " due to nmi_watchdog=1!\n"); - timer_through_8259 = 1; - } } /* Setup the lapic or request the broadcast */ diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 6cbc668a4c63..07fda23a9f76 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -413,13 +413,11 @@ void __init setup_boot_APIC_clock(void) * PIT/HPET going. Otherwise register lapic as a dummy * device. */ - if (nmi_watchdog != NMI_IO_APIC) { + if (nmi_watchdog != NMI_IO_APIC) lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY; - } else { + else printk(KERN_WARNING "APIC timer registered as dummy," " due to nmi_watchdog=1!\n"); - timer_through_8259 = 1; - } setup_APIC_timer(); } -- cgit v1.2.3 From 6fe9fe875691e15eda61b992e03257e68aa5ba4f Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Sun, 8 Jun 2008 10:14:40 +0200 Subject: Revert "x86: APIC/SMP: downgrade the NMI watchdog for "nosmp"" This reverts commit 791b93d3dfaf16c23e978bec0cc0a3dd9d855d63. A better fix from Maciej will be merged. --- arch/x86/kernel/smpboot.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index df60bc7c9cb7..8c53d86e3e86 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1159,10 +1159,6 @@ static int __init smp_sanity_check(unsigned max_cpus) if (!max_cpus) { printk(KERN_INFO "SMP mode deactivated.\n"); smpboot_clear_io_apic(); - - if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED) - nmi_watchdog = NMI_LOCAL_APIC; - #ifdef CONFIG_X86_32 connect_bsp_APIC(); #endif -- cgit v1.2.3 From 148b50830993acc67129f09c544d9167291e5458 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 6 Jun 2008 03:27:41 +0100 Subject: x86: NMI watchdog: Downgrade helper A downgrade helper for the NMI watchdog to be used in all places where the I/O APIC watchdog may have been requested, but the I/O APIC is found not to be there or meant to be left disabled. This is so that the reconfiguration is cosistent and defined in a single place only. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- include/asm-x86/nmi.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/asm-x86/nmi.h b/include/asm-x86/nmi.h index 1e363021e72f..745d8c847de5 100644 --- a/include/asm-x86/nmi.h +++ b/include/asm-x86/nmi.h @@ -78,6 +78,11 @@ extern int unknown_nmi_panic; void __trigger_all_cpu_backtrace(void); #define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace() +static inline void localise_nmi_watchdog(void) +{ + if (nmi_watchdog == NMI_IO_APIC) + nmi_watchdog = NMI_LOCAL_APIC; +} #endif void lapic_watchdog_stop(void); -- cgit v1.2.3 From acae7d906f2f81d814e9c3730eeb19dfd3bf3bb4 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 6 Jun 2008 03:27:49 +0100 Subject: x86: APIC/UP: Downgrade the NMI watchdog for no I/O APIC If configured to use the I/O APIC, the NMI watchdog is deemed to fail if the chip will not be used in the UP configuration, because "noapic" has been specified or the chip is simply not there. Downgrade to the local APIC watchdog to rectify. The new #ifdef is ugly, I know. A proper solution is to provide suitable definitions of smp_found_config, etc. for !CONFIG_X86_IO_APIC in a header. Likewise the whole if () condition should be moved to a static inline function. Such clean-ups are beyond the scope of this change and can be done once the whole issue of the timer has been sorted out. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic_32.c | 4 ++++ arch/x86/kernel/apic_64.c | 2 ++ 2 files changed, 6 insertions(+) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6c..26e7a62e9ab6 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -1269,6 +1269,10 @@ int __init APIC_init_uniprocessor(void) setup_local_APIC(); +#ifdef CONFIG_X86_IO_APIC + if (!smp_found_config || skip_ioapic_setup || !nr_ioapics) +#endif + localise_nmi_watchdog(); end_local_APIC_setup(); #ifdef CONFIG_X86_IO_APIC if (smp_found_config) diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 07fda23a9f76..13eac4f984c3 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -954,6 +954,8 @@ int __init APIC_init_uniprocessor(void) if (!skip_ioapic_setup && nr_ioapics) enable_IO_APIC(); + if (!smp_found_config || skip_ioapic_setup || !nr_ioapics) + localise_nmi_watchdog(); end_local_APIC_setup(); if (smp_found_config && !skip_ioapic_setup && nr_ioapics) -- cgit v1.2.3 From 19662027488946e34dd54d3bb408fa3307681d7d Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 6 Jun 2008 03:27:56 +0100 Subject: x86: APIC/UP: Remove redundant NMI watchdog downgrade For the UP case the NMI watchdog downgrade is done consistently in APIC_init_uniprocessor() now. Remove redundant code used only when BIOS-disabled local APIC is activated. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic_32.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 26e7a62e9ab6..126e87153b39 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -1154,9 +1154,6 @@ static int __init detect_init_APIC(void) if (l & MSR_IA32_APICBASE_ENABLE) mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; - if (nmi_watchdog != NMI_NONE && nmi_watchdog != NMI_DISABLED) - nmi_watchdog = NMI_LOCAL_APIC; - printk(KERN_INFO "Found and enabled local APIC!\n"); apic_pm_activate(); -- cgit v1.2.3 From d54db1ac9ecde9bcb8a561595b02c1d970d3a4d6 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 6 Jun 2008 03:28:02 +0100 Subject: x86: APIC/SMP: Downgrade the NMI watchdog for "nosmp" If configured to use the I/O APIC, the NMI watchdog is deemed to fail if the chip has been deactivated as a result of "nosmp". Downgrade to the local APIC watchdog similarly to what is done for the UP case. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 8c53d86e3e86..f3760349c84f 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1159,6 +1159,9 @@ static int __init smp_sanity_check(unsigned max_cpus) if (!max_cpus) { printk(KERN_INFO "SMP mode deactivated.\n"); smpboot_clear_io_apic(); + + localise_nmi_watchdog(); + #ifdef CONFIG_X86_32 connect_bsp_APIC(); #endif -- cgit v1.2.3 From d788bada2f6c49673f85338ac4c0c642e5e52cff Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 6 Jun 2008 03:28:13 +0100 Subject: x86: APIC/SMP: Downgrade the NMI watchdog for "noapic" If configured to use the I/O APIC, the NMI watchdog is deemed to fail if the chip has been deactivated as a result of "noapic". Downgrade to the local APIC watchdog similarly to what is done for the UP case. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- include/asm-x86/mach-default/smpboot_hooks.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/include/asm-x86/mach-default/smpboot_hooks.h b/include/asm-x86/mach-default/smpboot_hooks.h index 56d0e1fa0258..b63c52182006 100644 --- a/include/asm-x86/mach-default/smpboot_hooks.h +++ b/include/asm-x86/mach-default/smpboot_hooks.h @@ -41,8 +41,10 @@ static inline void __init smpboot_setup_io_apic(void) */ if (!skip_ioapic_setup && nr_ioapics) setup_IO_APIC(); - else + else { nr_ioapics = 0; + localise_nmi_watchdog(); + } } static inline void smpboot_clear_io_apic(void) -- cgit v1.2.3 From d3f020d2f9bb9a61ca64d4eb058c9f68f827a2b4 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 7 Jun 2008 19:53:56 +0400 Subject: x86, io-apic: define names for redirection table entry fields Each I/O APIC redirection table entry has a number of fields. Define names for them to eliminate reference by hard coded numbers. Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar --- include/asm-x86/io_apic.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/include/asm-x86/io_apic.h b/include/asm-x86/io_apic.h index a6732566ad05..dc0f55f2b034 100644 --- a/include/asm-x86/io_apic.h +++ b/include/asm-x86/io_apic.h @@ -11,6 +11,15 @@ * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar */ +/* I/O Unit Redirection Table */ +#define IO_APIC_REDIR_VECTOR_MASK 0x000FF +#define IO_APIC_REDIR_DEST_LOGICAL 0x00800 +#define IO_APIC_REDIR_DEST_PHYSICAL 0x00000 +#define IO_APIC_REDIR_SEND_PENDING (1 << 12) +#define IO_APIC_REDIR_REMOTE_IRR (1 << 14) +#define IO_APIC_REDIR_LEVEL_TRIGGER (1 << 15) +#define IO_APIC_REDIR_MASKED (1 << 16) + /* * The structure of the IO-APIC: */ -- cgit v1.2.3 From 46b3b4ef1ea2a0892b9b38b6a0c65a3f33b504aa Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Sat, 7 Jun 2008 19:53:57 +0400 Subject: x86, io-apic: use predefined names instead of numeric constants This patch replaces some hard-coded numbers with predefined names. Signed-off-by: Cyrill Gorcunov Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 10 ++++++---- arch/x86/kernel/io_apic_64.c | 13 +++++++------ 2 files changed, 13 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 5c0f8d6496a6..40fbb229fe7d 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -261,25 +261,27 @@ static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsign /* mask = 1 */ static void __mask_IO_APIC_irq (unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00010000, 0); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, 0); } /* mask = 0 */ static void __unmask_IO_APIC_irq (unsigned int irq) { - __modify_IO_APIC_irq(irq, 0, 0x00010000); + __modify_IO_APIC_irq(irq, 0, IO_APIC_REDIR_MASKED); } /* mask = 1, trigger = 0 */ static void __mask_and_edge_IO_APIC_irq (unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, + IO_APIC_REDIR_LEVEL_TRIGGER); } /* mask = 0, trigger = 1 */ static void __unmask_and_level_IO_APIC_irq (unsigned int irq) { - __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000); + __modify_IO_APIC_irq(irq, IO_APIC_REDIR_LEVEL_TRIGGER, + IO_APIC_REDIR_MASKED); } static void mask_IO_APIC_irq (unsigned int irq) diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 40a184d4dff8..60a022d6de5e 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -183,7 +183,7 @@ static bool io_apic_level_ack_pending(unsigned int irq) break; reg = io_apic_read(entry->apic, 0x10 + pin*2); /* Is the remote IRR bit set? */ - if ((reg >> 14) & 1) { + if (reg & IO_APIC_REDIR_REMOTE_IRR) { spin_unlock_irqrestore(&ioapic_lock, flags); return true; } @@ -298,7 +298,7 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector) break; io_apic_write(apic, 0x11 + pin*2, dest); reg = io_apic_read(apic, 0x10 + pin*2); - reg &= ~0x000000ff; + reg &= ~IO_APIC_REDIR_VECTOR_MASK; reg |= vector; io_apic_modify(apic, reg); if (!entry->next) @@ -366,10 +366,11 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin) static void name##_IO_APIC_irq (unsigned int irq) \ __DO_ACTION(R, ACTION, FINAL) -DO_ACTION( __mask, 0, |= 0x00010000, io_apic_sync(entry->apic) ) - /* mask = 1 */ -DO_ACTION( __unmask, 0, &= 0xfffeffff, ) - /* mask = 0 */ +/* mask = 1 */ +DO_ACTION(__mask, 0, |= IO_APIC_REDIR_MASKED, io_apic_sync(entry->apic)) + +/* mask = 0 */ +DO_ACTION(__unmask, 0, &= ~IO_APIC_REDIR_MASKED, ) static void mask_IO_APIC_irq (unsigned int irq) { -- cgit v1.2.3 From 360624484c81d55f88b1e5f48ce24c9243ce38e5 Mon Sep 17 00:00:00 2001 From: Paolo Ciarrocchi Date: Sun, 8 Jun 2008 13:07:18 +0200 Subject: x86: coding style fixes to arch/x86/kernel/io_apic_32.c Before: total: 91 errors, 73 warnings, 2850 lines checked After: total: 1 errors, 47 warnings, 2848 lines checked Compile tested: paolo@paolo-desktop:/tmp$ size io* text data bss dec hex filename 13836 1756 11104 26696 6848 io_apic_32.o.after 13836 1756 11104 26696 6848 io_apic_32.o.before Signed-off-by: Paolo Ciarrocchi Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 348 +++++++++++++++++++++---------------------- 1 file changed, 173 insertions(+), 175 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 40fbb229fe7d..9a924ebcd74c 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -239,7 +239,7 @@ static void __init replace_pin_at_irq(unsigned int irq, } } -static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable) +static void __modify_IO_APIC_irq(unsigned int irq, unsigned long enable, unsigned long disable) { struct irq_pin_list *entry = irq_2_pin + irq; unsigned int pin, reg; @@ -259,32 +259,32 @@ static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsign } /* mask = 1 */ -static void __mask_IO_APIC_irq (unsigned int irq) +static void __mask_IO_APIC_irq(unsigned int irq) { __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, 0); } /* mask = 0 */ -static void __unmask_IO_APIC_irq (unsigned int irq) +static void __unmask_IO_APIC_irq(unsigned int irq) { __modify_IO_APIC_irq(irq, 0, IO_APIC_REDIR_MASKED); } /* mask = 1, trigger = 0 */ -static void __mask_and_edge_IO_APIC_irq (unsigned int irq) +static void __mask_and_edge_IO_APIC_irq(unsigned int irq) { __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, IO_APIC_REDIR_LEVEL_TRIGGER); } /* mask = 0, trigger = 1 */ -static void __unmask_and_level_IO_APIC_irq (unsigned int irq) +static void __unmask_and_level_IO_APIC_irq(unsigned int irq) { __modify_IO_APIC_irq(irq, IO_APIC_REDIR_LEVEL_TRIGGER, IO_APIC_REDIR_MASKED); } -static void mask_IO_APIC_irq (unsigned int irq) +static void mask_IO_APIC_irq(unsigned int irq) { unsigned long flags; @@ -293,7 +293,7 @@ static void mask_IO_APIC_irq (unsigned int irq) spin_unlock_irqrestore(&ioapic_lock, flags); } -static void unmask_IO_APIC_irq (unsigned int irq) +static void unmask_IO_APIC_irq(unsigned int irq) { unsigned long flags; @@ -305,7 +305,7 @@ static void unmask_IO_APIC_irq (unsigned int irq) static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) { struct IO_APIC_route_entry entry; - + /* Check delivery_mode to be sure we're not clearing an SMI pin */ entry = ioapic_read_entry(apic, pin); if (entry.delivery_mode == dest_SMI) @@ -317,7 +317,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) ioapic_mask_entry(apic, pin); } -static void clear_IO_APIC (void) +static void clear_IO_APIC(void) { int apic, pin; @@ -334,7 +334,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) struct irq_pin_list *entry = irq_2_pin + irq; unsigned int apicid_value; cpumask_t tmp; - + cpus_and(tmp, cpumask, cpu_online_map); if (cpus_empty(tmp)) tmp = TARGET_CPUS; @@ -363,7 +363,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) # include /* kstat */ # include /* kmalloc() */ # include - + #define IRQBALANCE_CHECK_ARCH -999 #define MAX_BALANCED_IRQ_INTERVAL (5*HZ) #define MIN_BALANCED_IRQ_INTERVAL (HZ/2) @@ -375,14 +375,14 @@ static int physical_balance __read_mostly; static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL; static struct irq_cpu_info { - unsigned long * last_irq; - unsigned long * irq_delta; + unsigned long *last_irq; + unsigned long *irq_delta; unsigned long irq; } irq_cpu_data[NR_CPUS]; #define CPU_IRQ(cpu) (irq_cpu_data[cpu].irq) -#define LAST_CPU_IRQ(cpu,irq) (irq_cpu_data[cpu].last_irq[irq]) -#define IRQ_DELTA(cpu,irq) (irq_cpu_data[cpu].irq_delta[irq]) +#define LAST_CPU_IRQ(cpu, irq) (irq_cpu_data[cpu].last_irq[irq]) +#define IRQ_DELTA(cpu, irq) (irq_cpu_data[cpu].irq_delta[irq]) #define IDLE_ENOUGH(cpu,now) \ (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1)) @@ -421,8 +421,8 @@ inside: if (cpu == -1) cpu = NR_CPUS-1; } - } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) || - (search_idle && !IDLE_ENOUGH(cpu,now))); + } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu, allowed_mask) || + (search_idle && !IDLE_ENOUGH(cpu, now))); return cpu; } @@ -432,15 +432,14 @@ static inline void balance_irq(int cpu, int irq) unsigned long now = jiffies; cpumask_t allowed_mask; unsigned int new_cpu; - + if (irqbalance_disabled) - return; + return; cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]); new_cpu = move(cpu, allowed_mask, now, 1); - if (cpu != new_cpu) { + if (cpu != new_cpu) set_pending_irq(irq, cpumask_of_cpu(new_cpu)); - } } static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) @@ -452,14 +451,14 @@ static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) if (!irq_desc[j].action) continue; /* Is it a significant load ? */ - if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) < + if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i), j) < useful_load_threshold) continue; balance_irq(i, j); } } balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, - balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); return; } @@ -488,22 +487,22 @@ static void do_irq_balance(void) /* Is this an active IRQ or balancing disabled ? */ if (!irq_desc[j].action || irq_balancing_disabled(j)) continue; - if ( package_index == i ) - IRQ_DELTA(package_index,j) = 0; + if (package_index == i) + IRQ_DELTA(package_index, j) = 0; /* Determine the total count per processor per IRQ */ value_now = (unsigned long) kstat_cpu(i).irqs[j]; /* Determine the activity per processor per IRQ */ - delta = value_now - LAST_CPU_IRQ(i,j); + delta = value_now - LAST_CPU_IRQ(i, j); /* Update last_cpu_irq[][] for the next time */ - LAST_CPU_IRQ(i,j) = value_now; + LAST_CPU_IRQ(i, j) = value_now; /* Ignore IRQs whose rate is less than the clock */ if (delta < useful_load_threshold) continue; /* update the load for the processor or package total */ - IRQ_DELTA(package_index,j) += delta; + IRQ_DELTA(package_index, j) += delta; /* Keep track of the higher numbered sibling as well */ if (i != package_index) @@ -529,7 +528,8 @@ static void do_irq_balance(void) max_cpu_irq = ULONG_MAX; tryanothercpu: - /* Look for heaviest loaded processor. + /* + * Look for heaviest loaded processor. * We may come back to get the next heaviest loaded processor. * Skip processors with trivial loads. */ @@ -538,7 +538,7 @@ tryanothercpu: for_each_online_cpu(i) { if (i != CPU_TO_PACKAGEINDEX(i)) continue; - if (max_cpu_irq <= CPU_IRQ(i)) + if (max_cpu_irq <= CPU_IRQ(i)) continue; if (tmp_cpu_irq < CPU_IRQ(i)) { tmp_cpu_irq = CPU_IRQ(i); @@ -547,8 +547,9 @@ tryanothercpu: } if (tmp_loaded == -1) { - /* In the case of small number of heavy interrupt sources, - * loading some of the cpus too much. We use Ingo's original + /* + * In the case of small number of heavy interrupt sources, + * loading some of the cpus too much. We use Ingo's original * approach to rotate them around. */ if (!first_attempt && imbalance >= useful_load_threshold) { @@ -557,13 +558,14 @@ tryanothercpu: } goto not_worth_the_effort; } - + first_attempt = 0; /* heaviest search */ max_cpu_irq = tmp_cpu_irq; /* load */ max_loaded = tmp_loaded; /* processor */ imbalance = (max_cpu_irq - min_cpu_irq) / 2; - - /* if imbalance is less than approx 10% of max load, then + + /* + * if imbalance is less than approx 10% of max load, then * observe diminishing returns action. - quit */ if (imbalance < (max_cpu_irq >> 3)) @@ -579,26 +581,25 @@ tryanotherirq: /* Is this an active IRQ? */ if (!irq_desc[j].action) continue; - if (imbalance <= IRQ_DELTA(max_loaded,j)) + if (imbalance <= IRQ_DELTA(max_loaded, j)) continue; /* Try to find the IRQ that is closest to the imbalance * without going over. */ - if (move_this_load < IRQ_DELTA(max_loaded,j)) { - move_this_load = IRQ_DELTA(max_loaded,j); + if (move_this_load < IRQ_DELTA(max_loaded, j)) { + move_this_load = IRQ_DELTA(max_loaded, j); selected_irq = j; } } - if (selected_irq == -1) { + if (selected_irq == -1) goto tryanothercpu; - } imbalance = move_this_load; - + /* For physical_balance case, we accumulated both load * values in the one of the siblings cpu_irq[], * to use the same code for physical and logical processors - * as much as possible. + * as much as possible. * * NOTE: the cpu_irq[] array holds the sum of the load for * sibling A and sibling B in the slot for the lowest numbered @@ -627,11 +628,11 @@ tryanotherirq: /* mark for change destination */ set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); - /* Since we made a change, come back sooner to + /* Since we made a change, come back sooner to * check for more variation. */ balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, - balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); + balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); return; } goto tryanotherirq; @@ -642,7 +643,7 @@ not_worth_the_effort: * upward */ balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL, - balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); + balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); return; } @@ -681,13 +682,13 @@ static int __init balanced_irq_init(void) cpumask_t tmp; cpus_shift_right(tmp, cpu_online_map, 2); - c = &boot_cpu_data; + c = &boot_cpu_data; /* When not overwritten by the command line ask subarchitecture. */ if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH) irqbalance_disabled = NO_BALANCE_IRQ; if (irqbalance_disabled) return 0; - + /* disable irqbalance completely if there is only one processor online */ if (num_online_cpus() < 2) { irqbalance_disabled = 1; @@ -707,10 +708,10 @@ static int __init balanced_irq_init(void) printk(KERN_ERR "balanced_irq_init: out of memory"); goto failed; } - memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS); - memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS); + memset(irq_cpu_data[i].irq_delta, 0, sizeof(unsigned long) * NR_IRQS); + memset(irq_cpu_data[i].last_irq, 0, sizeof(unsigned long) * NR_IRQS); } - + printk(KERN_INFO "Starting balanced_irq\n"); if (!IS_ERR(kthread_run(balanced_irq, NULL, "kirqd"))) return 0; @@ -845,7 +846,7 @@ static int __init find_isa_irq_apic(int irq, int type) } if (i < mp_irq_entries) { int apic; - for(apic = 0; apic < nr_ioapics; apic++) { + for (apic = 0; apic < nr_ioapics; apic++) { if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) return apic; } @@ -882,7 +883,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) !mp_irqs[i].mpc_irqtype && (bus == lbus) && (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); + int irq = pin_2_irq(i, apic, mp_irqs[i].mpc_dstirq); if (!(apic || IO_APIC_IRQ(irq))) continue; @@ -902,7 +903,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); /* - * This function currently is only a helper for the i386 smp boot process where + * This function currently is only a helper for the i386 smp boot process where * we need to reprogram the ioredtbls to cater for the cpus which have come online * so mask in all cases should simply be TARGET_CPUS */ @@ -977,37 +978,36 @@ static int MPBIOS_polarity(int idx) /* * Determine IRQ line polarity (high active or low active): */ - switch (mp_irqs[idx].mpc_irqflag & 3) + switch (mp_irqs[idx].mpc_irqflag & 3) { + case 0: /* conforms, ie. bus-type dependent polarity */ { - case 0: /* conforms, ie. bus-type dependent polarity */ - { - polarity = test_bit(bus, mp_bus_not_pci)? - default_ISA_polarity(idx): - default_PCI_polarity(idx); - break; - } - case 1: /* high active */ - { - polarity = 0; - break; - } - case 2: /* reserved */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - case 3: /* low active */ - { - polarity = 1; - break; - } - default: /* invalid */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } + polarity = test_bit(bus, mp_bus_not_pci)? + default_ISA_polarity(idx): + default_PCI_polarity(idx); + break; + } + case 1: /* high active */ + { + polarity = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } + case 3: /* low active */ + { + polarity = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + polarity = 1; + break; + } } return polarity; } @@ -1020,69 +1020,67 @@ static int MPBIOS_trigger(int idx) /* * Determine IRQ trigger mode (edge or level sensitive): */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) + switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) { + case 0: /* conforms, ie. bus-type dependent */ { - case 0: /* conforms, ie. bus-type dependent */ - { - trigger = test_bit(bus, mp_bus_not_pci)? - default_ISA_trigger(idx): - default_PCI_trigger(idx); + trigger = test_bit(bus, mp_bus_not_pci)? + default_ISA_trigger(idx): + default_PCI_trigger(idx); #if defined(CONFIG_EISA) || defined(CONFIG_MCA) - switch (mp_bus_id_to_type[bus]) - { - case MP_BUS_ISA: /* ISA pin */ - { - /* set before the switch */ - break; - } - case MP_BUS_EISA: /* EISA pin */ - { - trigger = default_EISA_trigger(idx); - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - /* set before the switch */ - break; - } - case MP_BUS_MCA: /* MCA pin */ - { - trigger = default_MCA_trigger(idx); - break; - } - default: - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; - break; - } - } -#endif + switch (mp_bus_id_to_type[bus]) { + case MP_BUS_ISA: /* ISA pin */ + { + /* set before the switch */ break; } - case 1: /* edge */ + case MP_BUS_EISA: /* EISA pin */ { - trigger = 0; + trigger = default_EISA_trigger(idx); break; } - case 2: /* reserved */ + case MP_BUS_PCI: /* PCI pin */ { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; + /* set before the switch */ break; } - case 3: /* level */ + case MP_BUS_MCA: /* MCA pin */ { - trigger = 1; + trigger = default_MCA_trigger(idx); break; } - default: /* invalid */ + default: { printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 0; + trigger = 1; break; } } +#endif + break; + } + case 1: /* edge */ + { + trigger = 0; + break; + } + case 2: /* reserved */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 1; + break; + } + case 3: /* level */ + { + trigger = 1; + break; + } + default: /* invalid */ + { + printk(KERN_WARNING "broken BIOS!!\n"); + trigger = 0; + break; + } + } return trigger; } @@ -1150,8 +1148,8 @@ static inline int IO_APIC_irq_trigger(int irq) for (apic = 0; apic < nr_ioapics; apic++) { for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - idx = find_irq_entry(apic,pin,mp_INT); - if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin))) + idx = find_irq_entry(apic, pin, mp_INT); + if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin))) return irq_trigger(idx); } } @@ -1166,7 +1164,7 @@ static u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 } static int __assign_irq_vector(int irq) { - static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0; + static int current_vector = FIRST_DEVICE_VECTOR, current_offset; int vector, offset; BUG_ON((unsigned)irq >= NR_IRQ_VECTORS); @@ -1239,15 +1237,15 @@ static void __init setup_IO_APIC_irqs(void) /* * add it to the IO-APIC irq-routing table: */ - memset(&entry,0,sizeof(entry)); + memset(&entry, 0, sizeof(entry)); entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; entry.mask = 0; /* enable IRQ */ - entry.dest.logical.logical_dest = + entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); - idx = find_irq_entry(apic,pin,mp_INT); + idx = find_irq_entry(apic, pin, mp_INT); if (idx == -1) { if (first_notcon) { apic_printk(APIC_VERBOSE, KERN_DEBUG @@ -1291,7 +1289,7 @@ static void __init setup_IO_APIC_irqs(void) vector = assign_irq_vector(irq); entry.vector = vector; ioapic_register_intr(irq, vector, IOAPIC_AUTO); - + if (!apic && (irq < 16)) disable_8259A_irq(irq); } @@ -1311,7 +1309,7 @@ static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, { struct IO_APIC_route_entry entry; - memset(&entry,0,sizeof(entry)); + memset(&entry, 0, sizeof(entry)); /* * We use logical delivery to get the timer IRQ @@ -1349,7 +1347,7 @@ void __init print_IO_APIC(void) if (apic_verbosity == APIC_QUIET) return; - printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); + printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (i = 0; i < nr_ioapics; i++) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); @@ -1454,7 +1452,7 @@ void __init print_IO_APIC(void) #if 0 -static void print_APIC_bitfield (int base) +static void print_APIC_bitfield(int base) { unsigned int v; int i, j; @@ -1475,7 +1473,7 @@ static void print_APIC_bitfield (int base) } } -void /*__init*/ print_local_APIC(void * dummy) +void /*__init*/ print_local_APIC(void *dummy) { unsigned int v, ver, maxlvt; @@ -1558,7 +1556,7 @@ void /*__init*/ print_local_APIC(void * dummy) printk("\n"); } -void print_all_local_APICs (void) +void print_all_local_APICs(void) { on_each_cpu(print_local_APIC, NULL, 1, 1); } @@ -1581,11 +1579,11 @@ void /*__init*/ print_PIC(void) v = inb(0xa0) << 8 | inb(0x20); printk(KERN_DEBUG "... PIC IRR: %04x\n", v); - outb(0x0b,0xa0); - outb(0x0b,0x20); + outb(0x0b, 0xa0); + outb(0x0b, 0x20); v = inb(0xa0) << 8 | inb(0x20); - outb(0x0a,0xa0); - outb(0x0a,0x20); + outb(0x0a, 0xa0); + outb(0x0a, 0x20); spin_unlock_irqrestore(&i8259A_lock, flags); @@ -1621,7 +1619,7 @@ static void __init enable_IO_APIC(void) spin_unlock_irqrestore(&ioapic_lock, flags); nr_ioapic_registers[apic] = reg_01.bits.entries+1; } - for(apic = 0; apic < nr_ioapics; apic++) { + for (apic = 0; apic < nr_ioapics; apic++) { int pin; /* See if any of the pins is in ExtINT mode */ for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { @@ -1743,7 +1741,7 @@ static void __init setup_ioapic_ids_from_mpc(void) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - + old_id = mp_ioapics[apic].mpc_apicid; if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { @@ -1795,7 +1793,7 @@ static void __init setup_ioapic_ids_from_mpc(void) /* * Read the right value from the MPC table and * write it into the ID register. - */ + */ apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", mp_ioapics[apic].mpc_apicid); @@ -2015,7 +2013,7 @@ static void ack_apic(unsigned int irq) ack_APIC_irq(); } -static void mask_lapic_irq (unsigned int irq) +static void mask_lapic_irq(unsigned int irq) { unsigned long v; @@ -2023,7 +2021,7 @@ static void mask_lapic_irq (unsigned int irq) apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); } -static void unmask_lapic_irq (unsigned int irq) +static void unmask_lapic_irq(unsigned int irq) { unsigned long v; @@ -2041,14 +2039,14 @@ static struct irq_chip lapic_chip __read_mostly = { static void __init setup_nmi(void) { /* - * Dirty trick to enable the NMI watchdog ... + * Dirty trick to enable the NMI watchdog ... * We put the 8259A master into AEOI mode and * unmask on all local APICs LVT0 as NMI. * * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') * is from Maciej W. Rozycki - so we do not have to EOI from * the NMI handler or the timer interrupt. - */ + */ apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); enable_NMI_through_LVT0(); @@ -2312,10 +2310,10 @@ void __init setup_IO_APIC(void) * Called after all the initialization is done. If we didnt find any * APIC bugs then we can allow the modify fast path */ - + static int __init io_apic_bug_finalize(void) { - if(sis_apic_bug == -1) + if (sis_apic_bug == -1) sis_apic_bug = 0; return 0; } @@ -2326,17 +2324,17 @@ struct sysfs_ioapic_data { struct sys_device dev; struct IO_APIC_route_entry entry[0]; }; -static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; +static struct sysfs_ioapic_data *mp_ioapic_data[MAX_IO_APICS]; static int ioapic_suspend(struct sys_device *dev, pm_message_t state) { struct IO_APIC_route_entry *entry; struct sysfs_ioapic_data *data; int i; - + data = container_of(dev, struct sysfs_ioapic_data, dev); entry = data->entry; - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) entry[i] = ioapic_read_entry(dev->id, i); return 0; @@ -2349,7 +2347,7 @@ static int ioapic_resume(struct sys_device *dev) unsigned long flags; union IO_APIC_reg_00 reg_00; int i; - + data = container_of(dev, struct sysfs_ioapic_data, dev); entry = data->entry; @@ -2360,7 +2358,7 @@ static int ioapic_resume(struct sys_device *dev) io_apic_write(dev->id, 0, reg_00.raw); } spin_unlock_irqrestore(&ioapic_lock, flags); - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++) + for (i = 0; i < nr_ioapic_registers[dev->id]; i++) ioapic_write_entry(dev->id, i, entry[i]); return 0; @@ -2374,15 +2372,15 @@ static struct sysdev_class ioapic_sysdev_class = { static int __init ioapic_init_sysfs(void) { - struct sys_device * dev; + struct sys_device *dev; int i, size, error = 0; error = sysdev_class_register(&ioapic_sysdev_class); if (error) return error; - for (i = 0; i < nr_ioapics; i++ ) { - size = sizeof(struct sys_device) + nr_ioapic_registers[i] + for (i = 0; i < nr_ioapics; i++) { + size = sizeof(struct sys_device) + nr_ioapic_registers[i] * sizeof(struct IO_APIC_route_entry); mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); if (!mp_ioapic_data[i]) { @@ -2391,7 +2389,7 @@ static int __init ioapic_init_sysfs(void) } memset(mp_ioapic_data[i], 0, size); dev = &mp_ioapic_data[i]->dev; - dev->id = i; + dev->id = i; dev->cls = &ioapic_sysdev_class; error = sysdev_register(dev); if (error) { @@ -2466,7 +2464,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms msg->address_lo = MSI_ADDR_BASE_LO | ((INT_DEST_MODE == 0) ? - MSI_ADDR_DEST_MODE_PHYSICAL: +MSI_ADDR_DEST_MODE_PHYSICAL: MSI_ADDR_DEST_MODE_LOGICAL) | ((INT_DELIVERY_MODE != dest_LowestPrio) ? MSI_ADDR_REDIRECTION_CPU: @@ -2477,7 +2475,7 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms MSI_DATA_TRIGGER_EDGE | MSI_DATA_LEVEL_ASSERT | ((INT_DELIVERY_MODE != dest_LowestPrio) ? - MSI_DATA_DELIVERY_FIXED: +MSI_DATA_DELIVERY_FIXED: MSI_DATA_DELIVERY_LOWPRI) | MSI_DATA_VECTOR(vector); } @@ -2648,12 +2646,12 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) #endif /* CONFIG_HT_IRQ */ /* -------------------------------------------------------------------------- - ACPI-based IOAPIC Configuration + ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ #ifdef CONFIG_ACPI -int __init io_apic_get_unique_id (int ioapic, int apic_id) +int __init io_apic_get_unique_id(int ioapic, int apic_id) { union IO_APIC_reg_00 reg_00; static physid_mask_t apic_id_map = PHYSID_MASK_NONE; @@ -2662,10 +2660,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) int i = 0; /* - * The P4 platform supports up to 256 APIC IDs on two separate APIC - * buses (one for LAPICs, one for IOAPICs), where predecessors only + * The P4 platform supports up to 256 APIC IDs on two separate APIC + * buses (one for LAPICs, one for IOAPICs), where predecessors only * supports up to 16 on one shared APIC bus. - * + * * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full * advantage of new APIC bus architecture. */ @@ -2684,7 +2682,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) } /* - * Every APIC in a system must have a unique ID or we get lots of nice + * Every APIC in a system must have a unique ID or we get lots of nice * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (check_apicid_used(apic_id_map, apic_id)) { @@ -2701,7 +2699,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) "trying %d\n", ioapic, apic_id, i); apic_id = i; - } + } tmp = apicid_to_cpu_present(apic_id); physids_or(apic_id_map, apic_id_map, tmp); @@ -2728,7 +2726,7 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id) } -int __init io_apic_get_version (int ioapic) +int __init io_apic_get_version(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; @@ -2741,7 +2739,7 @@ int __init io_apic_get_version (int ioapic) } -int __init io_apic_get_redir_entries (int ioapic) +int __init io_apic_get_redir_entries(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; @@ -2754,7 +2752,7 @@ int __init io_apic_get_redir_entries (int ioapic) } -int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low) +int io_apic_set_pci_routing(int ioapic, int pin, int irq, int edge_level, int active_high_low) { struct IO_APIC_route_entry entry; @@ -2770,7 +2768,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a * corresponding device driver registers for this IRQ. */ - memset(&entry,0,sizeof(entry)); + memset(&entry, 0, sizeof(entry)); entry.delivery_mode = INT_DELIVERY_MODE; entry.dest_mode = INT_DEST_MODE; -- cgit v1.2.3 From cd08d0754ecb0cb9293c8476cb33ded1d23d0d8f Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 19 Jun 2008 00:39:33 +0100 Subject: x86: fix IO APIC breakage on HP nx6325 On Thu, 19 Jun 2008, Rafael J. Wysocki wrote: > > With such a configuration the "x86: I/O APIC: timer through 8259A > > second-chance" patch should not matter, because the only change it > > introduces is an attempt to try the same I/O APIC pin again, but with the > > IRQ0 line of the master 8259A enabled. That's not a terribly unusual > > configuration and nothing should get confused in the system. > > But it _does_ get confused, really. Something certainly gets confused, but so far I am not sure which bit exactly it is, are you? > > Barring the unlikely possibility of the 8259A actually being wired to > > INTIN2 of the I/O APIC I can see two possible explanations: > > > > 1. The 8259A interrupt actually escapes to the CPU somehow and is handled > > as an ExtINTA interrupt. This would make the code in check_timer() > > decide it has found a working configuration, while actually it has been > > fooled. [...] > Here you go: > > [ 0.108006] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.108006] ..MP-BIOS bug: 8254 timer not connected to IO-APIC > [ 0.108006] ...trying to set up timer (IRQ0) through the 8259A ... <3> > [ 0.108006] ..... (found apic 0 pin 2) ...<3> works. > > The full dmesg is at: http://www.sisk.pl/kernel/debug/20080618/dmesg-1.log Thanks. In this case I suspect the case #1 quoted above happens, that is the 8259A manages to deliver its interrupt somehow. Note at this stage it is meant to be in the AEOI mode, so it can happily resubmit the interrupt indefinitely with no additional handling as long as it receives INTA cycles. Can you please try the patch below on top of "x86: I/O APIC: timer through 8259A second-chance" to see whether my hypothesis is true? It modifies the through-8259A setup path so that the APIC input gets masked, but the 8259A has the timer interrupt still enabled. Let me know how the timer interrupt is routed in this case. Bisected-by: "Rafael J. Wysocki" Tested-by: "Rafael J. Wysocki" Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_64.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 60a022d6de5e..f06f5b4fb35f 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1715,6 +1715,7 @@ static inline void __init check_timer(void) /* replace_pin_at_irq(0, apic1, pin1, apic2, pin2); */ setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); unmask_IO_APIC_irq(0); + clear_IO_APIC_pin(apic2, pin2); enable_8259A_irq(0); if (timer_irq_works()) { apic_printk(APIC_VERBOSE," works.\n"); -- cgit v1.2.3 From 7f0dbbc08d80df7ea15d8da4f0d78255891c8812 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 20 Jun 2008 01:35:07 +0100 Subject: x86: fix IO APIC breakage on HP nx6325, v2 > That helped a lot, the system seems to work normally now. > > Here's the relevant snippet from dmesg: > > [ 0.108006] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.108006] ..MP-BIOS bug: 8254 timer not connected to IO-APIC > [ 0.108006] ...trying to set up timer (IRQ0) through the 8259A ... <3> > [ 0.108006] ..... (found apic 0 pin 2) ...<3> failed. > [ 0.108006] ...trying to set up timer as Virtual Wire IRQ...<3> works. > > and the whole thing is at: http://www.sisk.pl/kernel/debug/20080618/dmesg-2.log Hmm, that only proved the 8259A is indeed wired to the pin #2 of the I/O APIC. > I, personally, don't have any and AMD only has SB600 documentation on its > web page (it's still marked as "AMD confidential" ;-)). Well, the IC block is most likely the same as that's not rocket science and once done there is no need to fiddle with that. That written, I am afraid there is nothing useful about the IC in the document, except that it's there and consists of an I/O APIC providing 24 inputs and the usual pair of 8259A cores. Thanks for the reference anyway. > There is an interrupt controller in there, but I'm not sure if there's any > 8259A. The northbridge is on the CPU, actually. I will praise the day someone ships an x86 machine without an 8259A core! As expressed in another mail I suspect there may actually be a direct route from the 8254 to INTIN0 in the southbridge -- this is what other bootstrap logs seen in the Internet suggest. This would mean this particular BIOS is buggy (is it the latest version?) and provides an incorrect IRQ override in its ACPI tables, for example because the responsible block has been blindly copied from a machine using a commoner wiring. This could be moderately easily fixed up with a quirk based on the PCI ID (after checking it again, we actually used to have a quirk for ATI in this area, but the way it was done suggests the issue was not understood well enough). Could you please remove the hack sent yesterday and test the patch provided below? I do hope it builds, but I have no immediate means to check it. Please report the output. The intent is to test INTIN0 directly before testing INTIN2 through the 8259A. Thanks. Aside of that, what I have gathered from your reports (please correct me if I have got it wrong) is that when the through-8259A mode is used, then after a while 8254 timer interrupts stop arriving. What's interesting, the "Virtual Wire IRQ" seems to work for you correctly (that's quite an odd setup where a local APIC input is used in the native mode -- please post /proc/interrupts for confirmation), which in turn implies the master 8259A drives its INT output as we expect. Why would the I/O APIC input have problems then? Hmm... [ mingo@elte.hu: revert the "x86: fix IO APIC breakage on HP nx6325" version. ] Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_64.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index f06f5b4fb35f..40aa041b2987 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -360,6 +360,26 @@ static void add_pin_to_irq(unsigned int irq, int apic, int pin) entry->pin = pin; } +/* + * Reroute an IRQ to a different pin. + */ +static void __init replace_pin_at_irq(unsigned int irq, + int oldapic, int oldpin, + int newapic, int newpin) +{ + struct irq_pin_list *entry = irq_2_pin + irq; + + while (1) { + if (entry->apic == oldapic && entry->pin == oldpin) { + entry->apic = newapic; + entry->pin = newpin; + } + if (!entry->next) + break; + entry = irq_2_pin + entry->next; + } +} + #define DO_ACTION(name,R,ACTION, FINAL) \ \ @@ -1680,6 +1700,11 @@ static inline void __init check_timer(void) apic2 = apic1; } + replace_pin_at_irq(0, 0, 0, apic1, pin1); + apic1 = 0; + pin1 = 0; + setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); + if (pin1 != -1) { /* * Ok, does IRQ0 through the IOAPIC work? @@ -1712,10 +1737,9 @@ static inline void __init check_timer(void) /* * legacy devices should be connected to IO APIC #0 */ - /* replace_pin_at_irq(0, apic1, pin1, apic2, pin2); */ + replace_pin_at_irq(0, apic1, pin1, apic2, pin2); setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); unmask_IO_APIC_irq(0); - clear_IO_APIC_pin(apic2, pin2); enable_8259A_irq(0); if (timer_irq_works()) { apic_printk(APIC_VERBOSE," works.\n"); -- cgit v1.2.3 From 25556c1699ad84dd6077adf67c92eba362aa7dc2 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Sun, 22 Jun 2008 22:13:48 +0200 Subject: x86, arch/x86/kernel/io_apic_32.c: use kzalloc instead of kmalloc/memset 1) replace kmalloc/memset with equivalent kzalloc. Signed-off-by: Christophe Jaillet Cc: cj Cc: petero2@telia.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index 9a924ebcd74c..e22cbfbce049 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -702,14 +702,12 @@ static int __init balanced_irq_init(void) physical_balance = 1; for_each_online_cpu(i) { - irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); - irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + irq_cpu_data[i].irq_delta = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); + irq_cpu_data[i].last_irq = kzalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) { printk(KERN_ERR "balanced_irq_init: out of memory"); goto failed; } - memset(irq_cpu_data[i].irq_delta, 0, sizeof(unsigned long) * NR_IRQS); - memset(irq_cpu_data[i].last_irq, 0, sizeof(unsigned long) * NR_IRQS); } printk(KERN_INFO "Starting balanced_irq\n"); @@ -2382,12 +2380,11 @@ static int __init ioapic_init_sysfs(void) for (i = 0; i < nr_ioapics; i++) { size = sizeof(struct sys_device) + nr_ioapic_registers[i] * sizeof(struct IO_APIC_route_entry); - mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); + mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL); if (!mp_ioapic_data[i]) { printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); continue; } - memset(mp_ioapic_data[i], 0, size); dev = &mp_ioapic_data[i]->dev; dev->id = i; dev->cls = &ioapic_sysdev_class; -- cgit v1.2.3 From dbb018cd8a0fd073eaabf9de5a93f62d98bd7723 Mon Sep 17 00:00:00 2001 From: Darren Jenkins Date: Tue, 8 Jul 2008 15:51:44 +0800 Subject: crypto: tcrypt - Fix memory leak in test_cipher Coverity CID: 2306 & 2307 RESOURCE_LEAK In the second for loop in test_cipher(), data is allocated space with kzalloc() and is only ever freed in an error case. Looking at this loop, data is written to this memory but nothing seems to read from it. So here is a patch removing the allocation, I think this is the right fix. Only compile tested. Signed-off-by: Darren Jenkins Signed-off-by: Herbert Xu --- crypto/tcrypt.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 6beabc5abd07..e47f6e02133c 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -586,12 +586,6 @@ static void test_cipher(char *algo, int enc, j = 0; for (i = 0; i < tcount; i++) { - data = kzalloc(template[i].ilen, GFP_KERNEL); - if (!data) - continue; - - memcpy(data, template[i].input, template[i].ilen); - if (template[i].iv) memcpy(iv, template[i].iv, MAX_IVLEN); else @@ -613,10 +607,8 @@ static void test_cipher(char *algo, int enc, printk("setkey() failed flags=%x\n", crypto_ablkcipher_get_flags(tfm)); - if (!template[i].fail) { - kfree(data); + if (!template[i].fail) goto out; - } } temp = 0; -- cgit v1.2.3 From 8b2ef1d7285740953a2c4ef7faf15fdfc5e2f358 Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Sun, 8 Jun 2008 15:46:30 +0200 Subject: x86: add flags parameter to reserve_bootmem_generic() This patch adds a 'flags' parameter to reserve_bootmem_generic() like it already has been added in reserve_bootmem() with commit 72a7fe3967dbf86cb34e24fbf1d957fe24d2f246. It also changes all users to use BOOTMEM_DEFAULT, which doesn't effectively change the behaviour. Since the change is x86-specific, I don't think it's necessary to add a new API for migration. There are only 4 users of that function. The change is necessary for the next patch, using reserve_bootmem_generic() for crashkernel reservation. Signed-off-by: Bernhard Walle Signed-off-by: Ingo Molnar --- arch/x86/kernel/mpparse.c | 5 +++-- arch/x86/mm/init_64.c | 17 ++++++++++++----- include/asm-x86/proto.h | 2 +- 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 1cc7a4b8643f..6ae60909b601 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -880,10 +880,11 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, if (!reserve) return 1; - reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE); + reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE, + BOOTMEM_DEFAULT); if (mpf->mpf_physptr) reserve_bootmem_generic(mpf->mpf_physptr, - PAGE_SIZE); + PAGE_SIZE, BOOTMEM_DEFAULT); #endif return 1; } diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 819dad973b13..bf7bf1de6c25 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -799,12 +799,13 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif -void __init reserve_bootmem_generic(unsigned long phys, unsigned len) +int __init reserve_bootmem_generic(unsigned long phys, unsigned len, int flags) { #ifdef CONFIG_NUMA int nid, next_nid; #endif unsigned long pfn = phys >> PAGE_SHIFT; + int ret; if (pfn >= end_pfn) { /* @@ -812,11 +813,11 @@ void __init reserve_bootmem_generic(unsigned long phys, unsigned len) * firmware tables: */ if (pfn < max_pfn_mapped) - return; + return -EFAULT; printk(KERN_ERR "reserve_bootmem: illegal reserve %lx %u\n", phys, len); - return; + return -EFAULT; } /* Should check here against the e820 map to avoid double free */ @@ -824,9 +825,13 @@ void __init reserve_bootmem_generic(unsigned long phys, unsigned len) nid = phys_to_nid(phys); next_nid = phys_to_nid(phys + len - 1); if (nid == next_nid) - reserve_bootmem_node(NODE_DATA(nid), phys, len, BOOTMEM_DEFAULT); + ret = reserve_bootmem_node(NODE_DATA(nid), phys, len, flags); else - reserve_bootmem(phys, len, BOOTMEM_DEFAULT); + ret = reserve_bootmem(phys, len, flags); + + if (ret != 0) + return ret; + #else reserve_bootmem(phys, len, BOOTMEM_DEFAULT); #endif @@ -835,6 +840,8 @@ void __init reserve_bootmem_generic(unsigned long phys, unsigned len) dma_reserve += len / PAGE_SIZE; set_dma_reserve(dma_reserve); } + + return 0; } int kern_addr_valid(unsigned long addr) diff --git a/include/asm-x86/proto.h b/include/asm-x86/proto.h index 6c8b41b03f6d..a9f51472521e 100644 --- a/include/asm-x86/proto.h +++ b/include/asm-x86/proto.h @@ -14,7 +14,7 @@ extern void ia32_syscall(void); extern void ia32_cstar_target(void); extern void ia32_sysenter_target(void); -extern void reserve_bootmem_generic(unsigned long phys, unsigned len); +extern int reserve_bootmem_generic(unsigned long phys, unsigned len, int flags); extern void syscall32_cpu_init(void); -- cgit v1.2.3 From 12448e3ef3ae7fca7a7ad205084f45a67dcc4356 Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Sun, 8 Jun 2008 15:46:31 +0200 Subject: x86: use reserve_bootmem_generic() to reserve crashkernel memory on x86_64 This patch uses reserve_bootmem_generic() instead of reserve_bootmem() to reserve the crashkernel memory on x86_64. That's necessary for NUMA machines, see 00212fef814612245ed0261cbac8426d0c9a31a5: [PATCH] Fix kdump Crash Kernel boot memory reservation for NUMA machines This patch will fix a boot memory reservation bug that trashes memory on the ES7000 when loading the kdump crash kernel. The code in arch/x86_64/kernel/setup.c to reserve boot memory for the crash kernel uses the non-numa aware "reserve_bootmem" function instead of the NUMA aware "reserve_bootmem_generic". I checked to make sure that no other function was using "reserve_bootmem" and found none, except the ones that had NUMA ifdef'ed out. I have tested this patch only on an ES7000 with NUMA on and off (numa=off) in a single (non-NUMA) and multi-cell (NUMA) configurations. Signed-off-by: Amul Shah Looks-good-to: Vivek Goyal Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds The switch-back to reserve_bootmem() was accidentally introduced in 5c3391f9f749023a49c64d607da4fb49263690eb when adding the BOOTMEM_EXCLUSIVE parameter. Signed-off-by: Bernhard Walle Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 26d60cc0e370..ec65696ca2cd 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -244,7 +244,7 @@ static void __init reserve_crashkernel(void) return; } - if (reserve_bootmem(crash_base, crash_size, + if (reserve_bootmem_generic(crash_base, crash_size, BOOTMEM_EXCLUSIVE) < 0) { printk(KERN_INFO "crashkernel reservation failed - " "memory is in use\n"); -- cgit v1.2.3 From df5f6c212cc049d1989b5ce71bb863a367c261e9 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 10 Jun 2008 16:38:41 +0200 Subject: x86: unify the reserve_bootmem() behavior of early_res_to_bootmem() Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index a706e9057ba5..68aba413d403 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -635,12 +635,8 @@ void __init early_res_to_bootmem(u64 start, u64 end) continue; printk(KERN_INFO " early res: %d [%llx-%llx] %s\n", i, final_start, final_end - 1, r->name); -#ifdef CONFIG_X86_64 - reserve_bootmem_generic(final_start, final_end - final_start); -#else reserve_bootmem(final_start, final_end - final_start, BOOTMEM_DEFAULT); -#endif } } -- cgit v1.2.3 From ab4a465e96adf2f3a8aaa95384bacfa9ab661e35 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 10 Jun 2008 12:55:54 -0700 Subject: x86: e820 merge parsing of the mem=/memmap= boot parameters since we now have 32-bit support for e820_register_active_regions(), we can merge the parsing of the mem=/memmap= boot parameters. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 86 +++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_32.c | 120 ---------------------------------------------- arch/x86/kernel/e820_64.c | 69 -------------------------- include/asm-x86/e820.h | 2 + include/asm-x86/e820_32.h | 2 - include/asm-x86/e820_64.h | 2 - 6 files changed, 88 insertions(+), 193 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 68aba413d403..4f2cd5d179e2 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -890,3 +890,89 @@ u64 __init e820_hole_size(u64 start, u64 end) } return end - start - ((u64)ram << PAGE_SHIFT); } + +static void early_panic(char *msg) +{ + early_printk(msg); + panic(msg); +} + +/* "mem=nopentium" disables the 4MB page tables. */ +static int __init parse_memopt(char *p) +{ + u64 mem_size; + + if (!p) + return -EINVAL; + +#ifdef CONFIG_X86_32 + if (!strcmp(p, "nopentium")) { + setup_clear_cpu_cap(X86_FEATURE_PSE); + return 0; + } +#endif + + mem_size = memparse(p, &p); + end_user_pfn = mem_size>>PAGE_SHIFT; + return 0; +} +early_param("mem", parse_memopt); + +static int userdef __initdata; + +static int __init parse_memmap_opt(char *p) +{ + char *oldp; + u64 start_at, mem_size; + + if (!strcmp(p, "exactmap")) { +#ifdef CONFIG_CRASH_DUMP + /* + * If we are doing a crash dump, we still need to know + * the real mem size before original memory map is + * reset. + */ + e820_register_active_regions(0, 0, -1UL); + saved_max_pfn = e820_end_of_ram(); + remove_all_active_ranges(); +#endif + e820.nr_map = 0; + userdef = 1; + return 0; + } + + oldp = p; + mem_size = memparse(p, &p); + if (p == oldp) + return -EINVAL; + + userdef = 1; + if (*p == '@') { + start_at = memparse(p+1, &p); + add_memory_region(start_at, mem_size, E820_RAM); + } else if (*p == '#') { + start_at = memparse(p+1, &p); + add_memory_region(start_at, mem_size, E820_ACPI); + } else if (*p == '$') { + start_at = memparse(p+1, &p); + add_memory_region(start_at, mem_size, E820_RESERVED); + } else { + end_user_pfn = (mem_size >> PAGE_SHIFT); + } + return *p == '\0' ? 0 : -EINVAL; +} +early_param("memmap", parse_memmap_opt); + +void __init finish_e820_parsing(void) +{ + if (userdef) { + int nr = e820.nr_map; + + if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0) + early_panic("Invalid user supplied memory map"); + e820.nr_map = nr; + + printk(KERN_INFO "user-defined physical RAM map:\n"); + e820_print_map("user"); + } +} diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index e8a3b968c9fa..8de3df9548db 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -207,36 +207,6 @@ void __init init_iomem_resources(struct resource *code_resource, } } -void __init limit_regions(unsigned long long size) -{ - unsigned long long current_addr; - int i; - - e820_print_map("limit_regions start"); - for (i = 0; i < e820.nr_map; i++) { - current_addr = e820.map[i].addr + e820.map[i].size; - if (current_addr < size) - continue; - - if (e820.map[i].type != E820_RAM) - continue; - - if (e820.map[i].addr >= size) { - /* - * This region starts past the end of the - * requested size, skip it completely. - */ - e820.nr_map = i; - } else { - e820.nr_map = i + 1; - e820.map[i].size -= current_addr - size; - } - e820_print_map("limit_regions endfor"); - return; - } - e820_print_map("limit_regions endfunc"); -} - /* Overridden in paravirt.c if CONFIG_PARAVIRT */ char * __init __attribute__((weak)) memory_setup(void) { @@ -249,93 +219,3 @@ void __init setup_memory_map(void) e820_print_map(memory_setup()); } -static int __initdata user_defined_memmap; - -/* - * "mem=nopentium" disables the 4MB page tables. - * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM - * to , overriding the bios size. - * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from - * to +, overriding the bios size. - * - * HPA tells me bootloaders need to parse mem=, so no new - * option should be mem= [also see Documentation/i386/boot.txt] - */ -static int __init parse_mem(char *arg) -{ - if (!arg) - return -EINVAL; - - if (strcmp(arg, "nopentium") == 0) { - setup_clear_cpu_cap(X86_FEATURE_PSE); - } else { - /* If the user specifies memory size, we - * limit the BIOS-provided memory map to - * that size. exactmap can be used to specify - * the exact map. mem=number can be used to - * trim the existing memory map. - */ - unsigned long long mem_size; - - mem_size = memparse(arg, &arg); - limit_regions(mem_size); - user_defined_memmap = 1; - } - return 0; -} -early_param("mem", parse_mem); - -static int __init parse_memmap(char *arg) -{ - if (!arg) - return -EINVAL; - - if (strcmp(arg, "exactmap") == 0) { -#ifdef CONFIG_CRASH_DUMP - /* If we are doing a crash dump, we - * still need to know the real mem - * size before original memory map is - * reset. - */ - e820_register_active_regions(0, 0, -1UL); - saved_max_pfn = e820_end_of_ram(); - remove_all_active_ranges(); -#endif - e820.nr_map = 0; - user_defined_memmap = 1; - } else { - /* If the user specifies memory size, we - * limit the BIOS-provided memory map to - * that size. exactmap can be used to specify - * the exact map. mem=number can be used to - * trim the existing memory map. - */ - unsigned long long start_at, mem_size; - - mem_size = memparse(arg, &arg); - if (*arg == '@') { - start_at = memparse(arg+1, &arg); - add_memory_region(start_at, mem_size, E820_RAM); - } else if (*arg == '#') { - start_at = memparse(arg+1, &arg); - add_memory_region(start_at, mem_size, E820_ACPI); - } else if (*arg == '$') { - start_at = memparse(arg+1, &arg); - add_memory_region(start_at, mem_size, E820_RESERVED); - } else { - limit_regions(mem_size); - user_defined_memmap = 1; - } - } - return 0; -} -early_param("memmap", parse_memmap); - -void __init finish_e820_parsing(void) -{ - if (user_defined_memmap) { - printk(KERN_INFO "user-defined physical RAM map:\n"); - e820_print_map("user"); - } -} - diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 0afee2ca0bf8..47952b1690b6 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -96,75 +96,6 @@ char *__init machine_specific_memory_setup(void) return who; } -static int __init parse_memopt(char *p) -{ - if (!p) - return -EINVAL; - end_user_pfn = memparse(p, &p); - end_user_pfn >>= PAGE_SHIFT; - return 0; -} -early_param("mem", parse_memopt); - -static int userdef __initdata; - -static int __init parse_memmap_opt(char *p) -{ - char *oldp; - unsigned long long start_at, mem_size; - - if (!strcmp(p, "exactmap")) { -#ifdef CONFIG_CRASH_DUMP - /* - * If we are doing a crash dump, we still need to know - * the real mem size before original memory map is - * reset. - */ - e820_register_active_regions(0, 0, -1UL); - saved_max_pfn = e820_end_of_ram(); - remove_all_active_ranges(); -#endif - e820.nr_map = 0; - userdef = 1; - return 0; - } - - oldp = p; - mem_size = memparse(p, &p); - if (p == oldp) - return -EINVAL; - - userdef = 1; - if (*p == '@') { - start_at = memparse(p+1, &p); - add_memory_region(start_at, mem_size, E820_RAM); - } else if (*p == '#') { - start_at = memparse(p+1, &p); - add_memory_region(start_at, mem_size, E820_ACPI); - } else if (*p == '$') { - start_at = memparse(p+1, &p); - add_memory_region(start_at, mem_size, E820_RESERVED); - } else { - end_user_pfn = (mem_size >> PAGE_SHIFT); - } - return *p == '\0' ? 0 : -EINVAL; -} -early_param("memmap", parse_memmap_opt); - -void __init finish_e820_parsing(void) -{ - if (userdef) { - int nr = e820.nr_map; - - if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr) < 0) - early_panic("Invalid user supplied memory map"); - e820.nr_map = nr; - - printk(KERN_INFO "user-defined physical RAM map:\n"); - e820_print_map("user"); - } -} - int __init arch_get_ram_range(int slot, u64 *addr, u64 *size) { int i; diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 8aa32323a182..a5959e3a5626 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -98,6 +98,8 @@ extern int e820_find_active_region(const struct e820entry *ei, extern void e820_register_active_regions(int nid, unsigned long start_pfn, unsigned long end_pfn); extern u64 e820_hole_size(u64 start, u64 end); +extern void finish_e820_parsing(void); + #endif /* __ASSEMBLY__ */ #define ISA_START_ADDRESS 0xa0000 diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h index 212b74c10efc..9135ce6e617e 100644 --- a/include/asm-x86/e820_32.h +++ b/include/asm-x86/e820_32.h @@ -19,9 +19,7 @@ #ifndef __ASSEMBLY__ extern void setup_memory_map(void); -extern void finish_e820_parsing(void); -extern void limit_regions(unsigned long long size); extern void init_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h index 368585daaa42..478547c63222 100644 --- a/include/asm-x86/e820_64.h +++ b/include/asm-x86/e820_64.h @@ -22,8 +22,6 @@ extern int is_memory_any_valid(unsigned long start, unsigned long end); extern int e820_all_non_reserved(unsigned long start, unsigned long end); extern int is_memory_all_valid(unsigned long start, unsigned long end); -extern void finish_e820_parsing(void); - #endif/*!__ASSEMBLY__*/ #endif/*__E820_HEADER*/ -- cgit v1.2.3 From b20d70b70e9aa854c47d2af10659f1033b6d69bb Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 9 Jun 2008 17:00:15 -0700 Subject: x86: make generic arch support NUMAQ, fix fix typo in bigsmp switching. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/mach-generic/probe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c index ba18dec48555..5a7e4619e1c4 100644 --- a/arch/x86/mach-generic/probe.c +++ b/arch/x86/mach-generic/probe.c @@ -64,7 +64,7 @@ early_param("apic", parse_apic); void __init generic_bigsmp_probe(void) { -#if CONFIG_X86_BIGSMP +#ifdef CONFIG_X86_BIGSMP /* * This routine is used to switch to bigsmp mode when * - There is no apic= option specified by the user -- cgit v1.2.3 From b1f006b65c12b85df81f12c1073ad18fd26f4a16 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 9 Jun 2008 18:11:36 -0700 Subject: x86: make generic arch support NUMAQ, fix #2 we are checking mptable early for numaq, so don't need to reserve_bootmem for it. bootmem is not there yet. do the same thing as 64-bit. found it on 64g above system from 64-bit kernel kexec to 32 bit kernel with numaq support. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/mpparse.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 6ae60909b601..7ac1b689b70a 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -853,9 +853,13 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, smp_found_config = 1; #endif mpf_found = mpf; -#ifdef CONFIG_X86_32 + printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n", mpf, virt_to_phys(mpf)); + + if (!reserve) + return 1; +#ifdef CONFIG_X86_32 reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE, BOOTMEM_DEFAULT); if (mpf->mpf_physptr) { @@ -877,9 +881,6 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, } #else - if (!reserve) - return 1; - reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE, BOOTMEM_DEFAULT); if (mpf->mpf_physptr) -- cgit v1.2.3 From d2dbf343329dc777d77488743465f7be4245971d Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 13 Jun 2008 02:00:56 -0700 Subject: x86: clean up reserve_bootmem_generic() and port it to 32-bit 1. add reserve_bootmem_generic for 32bit 2. change len to unsigned long 3. make early_res_to_bootmem to use it Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 2 +- arch/x86/kernel/mpparse.c | 18 ++++++------------ arch/x86/mm/init_32.c | 6 ++++++ arch/x86/mm/init_64.c | 3 ++- include/asm-x86/proto.h | 2 -- include/linux/bootmem.h | 2 ++ 6 files changed, 17 insertions(+), 16 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 4f2cd5d179e2..774063f11be0 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -635,7 +635,7 @@ void __init early_res_to_bootmem(u64 start, u64 end) continue; printk(KERN_INFO " early res: %d [%llx-%llx] %s\n", i, final_start, final_end - 1, r->name); - reserve_bootmem(final_start, final_end - final_start, + reserve_bootmem_generic(final_start, final_end - final_start, BOOTMEM_DEFAULT); } } diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 7ac1b689b70a..b62ac6ba1410 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -859,10 +859,11 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, if (!reserve) return 1; -#ifdef CONFIG_X86_32 - reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE, + reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE, BOOTMEM_DEFAULT); if (mpf->mpf_physptr) { + unsigned long size = PAGE_SIZE; +#ifdef CONFIG_X86_32 /* * We cannot access to MPC table to compute * table size yet, as only few megabytes from @@ -872,22 +873,15 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, * PAGE_SIZE from mpg->mpf_physptr yields BUG() * in reserve_bootmem. */ - unsigned long size = PAGE_SIZE; unsigned long end = max_low_pfn * PAGE_SIZE; if (mpf->mpf_physptr + size > end) size = end - mpf->mpf_physptr; - reserve_bootmem(mpf->mpf_physptr, size, +#endif + reserve_bootmem_generic(mpf->mpf_physptr, size, BOOTMEM_DEFAULT); } -#else - reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE, - BOOTMEM_DEFAULT); - if (mpf->mpf_physptr) - reserve_bootmem_generic(mpf->mpf_physptr, - PAGE_SIZE, BOOTMEM_DEFAULT); -#endif - return 1; + return 1; } bp += 4; length -= 16; diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 0e7bb5e81670..abadb1da70df 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -785,3 +785,9 @@ void free_initrd_mem(unsigned long start, unsigned long end) free_init_pages("initrd memory", start, end); } #endif + +int __init reserve_bootmem_generic(unsigned long phys, unsigned long len, + int flags) +{ + return reserve_bootmem(phys, len, flags); +} diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index bf7bf1de6c25..b8c2c1ef7ad5 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -799,7 +799,8 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif -int __init reserve_bootmem_generic(unsigned long phys, unsigned len, int flags) +int __init reserve_bootmem_generic(unsigned long phys, unsigned long len, + int flags) { #ifdef CONFIG_NUMA int nid, next_nid; diff --git a/include/asm-x86/proto.h b/include/asm-x86/proto.h index a9f51472521e..3dd458c385c0 100644 --- a/include/asm-x86/proto.h +++ b/include/asm-x86/proto.h @@ -14,8 +14,6 @@ extern void ia32_syscall(void); extern void ia32_cstar_target(void); extern void ia32_sysenter_target(void); -extern int reserve_bootmem_generic(unsigned long phys, unsigned len, int flags); - extern void syscall32_cpu_init(void); extern void check_efer(void); diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h index 686895bacd9d..a1d9b79078ea 100644 --- a/include/linux/bootmem.h +++ b/include/linux/bootmem.h @@ -84,6 +84,8 @@ extern int reserve_bootmem(unsigned long addr, unsigned long size, int flags); __alloc_bootmem_low(x, PAGE_SIZE, 0) #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ +extern int reserve_bootmem_generic(unsigned long addr, unsigned long size, + int flags); extern unsigned long free_all_bootmem(void); extern unsigned long free_all_bootmem_node(pg_data_t *pgdat); extern void *__alloc_bootmem_node(pg_data_t *pgdat, -- cgit v1.2.3 From cc1050bafebfb1d7935331282e948b5016318192 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 13 Jun 2008 19:08:52 -0700 Subject: x86: replace shrink_active_range() with remove_active_range() in case we have kva before ramdisk on a node, we still need to use those ranges. v2: reserve_early kva ram area, in case there are holes in highmem, to avoid those area could be treat as free high pages. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/mm/discontig_32.c | 45 ++++++++++++++++++++++++--------------------- include/linux/mm.h | 3 ++- mm/page_alloc.c | 29 +++++++++++++++++++++++------ 3 files changed, 49 insertions(+), 28 deletions(-) diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index accc7c6c57fc..c3f119e99e0d 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -230,8 +230,8 @@ static unsigned long calculate_numa_remap_pages(void) unsigned long size, reserve_pages = 0; for_each_online_node(nid) { - u64 node_end_target; - u64 node_end_final; + u64 node_kva_target; + u64 node_kva_final; /* * The acpi/srat node info can show hot-add memroy zones @@ -254,42 +254,45 @@ static unsigned long calculate_numa_remap_pages(void) /* now the roundup is correct, convert to PAGE_SIZE pages */ size = size * PTRS_PER_PTE; - node_end_target = round_down(node_end_pfn[nid] - size, + node_kva_target = round_down(node_end_pfn[nid] - size, PTRS_PER_PTE); - node_end_target <<= PAGE_SHIFT; + node_kva_target <<= PAGE_SHIFT; do { - node_end_final = find_e820_area(node_end_target, + node_kva_final = find_e820_area(node_kva_target, ((u64)node_end_pfn[nid])<>PAGE_SHIFT) > (node_start_pfn[nid])); + node_kva_target -= LARGE_PAGE_BYTES; + } while (node_kva_final == -1ULL && + (node_kva_target>>PAGE_SHIFT) > (node_start_pfn[nid])); - if (node_end_final == -1ULL) + if (node_kva_final == -1ULL) panic("Can not get kva ram\n"); - printk("Reserving %ld pages of KVA for lmem_map of node %d\n", - size, nid); node_remap_size[nid] = size; node_remap_offset[nid] = reserve_pages; reserve_pages += size; - printk("Shrinking node %d from %ld pages to %lld pages\n", - nid, node_end_pfn[nid], node_end_final>>PAGE_SHIFT); + printk("Reserving %ld pages of KVA for lmem_map of node %d at %llx\n", + size, nid, node_kva_final>>PAGE_SHIFT); /* * prevent kva address below max_low_pfn want it on system * with less memory later. * layout will be: KVA address , KVA RAM + * + * we are supposed to only record the one less then max_low_pfn + * but we could have some hole in high memory, and it will only + * check page_is_ram(pfn) && !page_is_reserved_early(pfn) to decide + * to use it as free. + * So reserve_early here, hope we don't run out of that array */ - if ((node_end_final>>PAGE_SHIFT) < max_low_pfn) - reserve_early(node_end_final, - node_end_final+(((u64)size)<>PAGE_SHIFT; - node_remap_start_pfn[nid] = node_end_pfn[nid]; - shrink_active_range(nid, node_end_pfn[nid]); + reserve_early(node_kva_final, + node_kva_final+(((u64)size)<>PAGE_SHIFT; + remove_active_range(nid, node_remap_start_pfn[nid], + node_remap_start_pfn[nid] + size); } printk("Reserving total of %ld pages for numa KVA remap\n", reserve_pages); diff --git a/include/linux/mm.h b/include/linux/mm.h index ce8e397a61f6..034a3156d2f0 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -998,7 +998,8 @@ extern void free_area_init_node(int nid, pg_data_t *pgdat, extern void free_area_init_nodes(unsigned long *max_zone_pfn); extern void add_active_range(unsigned int nid, unsigned long start_pfn, unsigned long end_pfn); -extern void shrink_active_range(unsigned int nid, unsigned long new_end_pfn); +extern void remove_active_range(unsigned int nid, unsigned long start_pfn, + unsigned long end_pfn); extern void push_node_boundaries(unsigned int nid, unsigned long start_pfn, unsigned long end_pfn); extern void remove_all_active_ranges(void); diff --git a/mm/page_alloc.c b/mm/page_alloc.c index eee5ba7509c1..d80e1868e570 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3552,30 +3552,47 @@ void __init add_active_range(unsigned int nid, unsigned long start_pfn, } /** - * shrink_active_range - Shrink an existing registered range of PFNs + * remove_active_range - Shrink an existing registered range of PFNs * @nid: The node id the range is on that should be shrunk - * @new_end_pfn: The new PFN of the range + * @start_pfn: The new PFN of the range + * @end_pfn: The new PFN of the range * * i386 with NUMA use alloc_remap() to store a node_mem_map on a local node. * The map is kept near the end physical page range that has already been * registered. This function allows an arch to shrink an existing registered * range. */ -void __init shrink_active_range(unsigned int nid, unsigned long new_end_pfn) +void __init remove_active_range(unsigned int nid, unsigned long start_pfn, + unsigned long end_pfn) { int i, j; int removed = 0; + printk(KERN_DEBUG "remove_active_range (%d, %lu, %lu)\n", + nid, start_pfn, end_pfn); + /* Find the old active region end and shrink */ for_each_active_range_index_in_nid(i, nid) { - if (early_node_map[i].start_pfn >= new_end_pfn) { + if (early_node_map[i].start_pfn >= start_pfn && + early_node_map[i].end_pfn <= end_pfn) { /* clear it */ + early_node_map[i].start_pfn = 0; early_node_map[i].end_pfn = 0; removed = 1; continue; } - if (early_node_map[i].end_pfn > new_end_pfn) { - early_node_map[i].end_pfn = new_end_pfn; + if (early_node_map[i].start_pfn < start_pfn && + early_node_map[i].end_pfn > start_pfn) { + unsigned long temp_end_pfn = early_node_map[i].end_pfn; + early_node_map[i].end_pfn = start_pfn; + if (temp_end_pfn > end_pfn) + add_active_range(nid, end_pfn, temp_end_pfn); + continue; + } + if (early_node_map[i].start_pfn >= start_pfn && + early_node_map[i].end_pfn > end_pfn && + early_node_map[i].start_pfn < end_pfn) { + early_node_map[i].start_pfn = end_pfn; continue; } } -- cgit v1.2.3 From 9a27f5c51629c3d3b7718dd4be3d2722b472fafe Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 13 Jun 2008 20:07:03 -0700 Subject: x86: clean up relocate_initrd 1. move that before zone_sizes_init ... 2. add free_early for one old one, otherwise it will be be reserved again when we init highmem. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_32.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 1d4be07e15e5..72b11d4557b7 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -584,6 +584,9 @@ static void __init relocate_initrd(void) printk(KERN_INFO "Copied RAMDISK from %016llx - %016llx to %08llx - %08llx\n", ramdisk_image, ramdisk_image + ramdisk_size - 1, ramdisk_here, ramdisk_here + ramdisk_size - 1); + + /* need to free that, otherwise init highmem will reserve it again */ + free_early(ramdisk_image, ramdisk_image+ramdisk_size); } #endif /* CONFIG_BLK_DEV_INITRD */ @@ -801,10 +804,6 @@ void __init setup_arch(char **cmdline_p) init_ohci1394_dma_on_all_controllers(); #endif - remapped_pgdat_init(); - sparse_init(); - zone_sizes_init(); - /* * NOTE: at this point the bootmem allocator is fully available. */ @@ -813,6 +812,10 @@ void __init setup_arch(char **cmdline_p) relocate_initrd(); #endif + remapped_pgdat_init(); + sparse_init(); + zone_sizes_init(); + paravirt_post_allocator_init(); dmi_scan_machine(); -- cgit v1.2.3 From d867e5310bd3c560093d39669ef52ff7f1b5711a Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 14 Jun 2008 01:26:41 -0700 Subject: x86: keep MP_intsrc_info untouched if we do not update mptable Daniel Exner reported IO-APIC enumeration breakage in linux-next. Alexey Starikovskiy found out that it might be related to commit 2944e16b25 "x86: update mptable". use enable_update_mptable to decide if need check before add mp_irqs array. Reported-by: Daniel Exner Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 3 +++ arch/x86/kernel/mpparse.c | 13 +++++++------ include/asm-x86/mpspec.h | 1 + 3 files changed, 11 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index caf4ed7ca069..4d370b1c5ae8 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1172,6 +1172,9 @@ int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, struct mpc_config_intsrc intsrc; int ioapic; + if (!enable_update_mptable) + return 0; + /* print the entry should happen on mptable identically */ intsrc.mpc_type = MP_INTSRC; intsrc.mpc_irqtype = mp_INT; diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index b62ac6ba1410..014ac5d90f80 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -34,6 +34,8 @@ #include #endif +int enable_update_mptable; + /* * Checksum an MP configuration block. */ @@ -295,10 +297,11 @@ void MP_intsrc_info(struct mpc_config_intsrc *m) print_MP_intsrc_info(m); - for (i = 0; i < mp_irq_entries; i++) { - if (!mp_irq_mpc_intsrc_cmp(&mp_irqs[i], m)) - return; - } + if (enable_update_mptable) + for (i = 0; i < mp_irq_entries; i++) { + if (!mp_irq_mpc_intsrc_cmp(&mp_irqs[i], m)) + return; + } assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]); if (++mp_irq_entries == MAX_IRQ_SOURCES) @@ -1110,8 +1113,6 @@ out: return 0; } -int __initdata enable_update_mptable; - static int __init update_mptable_setup(char *str) { enable_update_mptable = 1; diff --git a/include/asm-x86/mpspec.h b/include/asm-x86/mpspec.h index b8ba37496e2d..f48dbca740e4 100644 --- a/include/asm-x86/mpspec.h +++ b/include/asm-x86/mpspec.h @@ -61,6 +61,7 @@ extern void mp_config_acpi_legacy_irqs(void); extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low); extern void MP_intsrc_info(struct mpc_config_intsrc *m); #ifdef CONFIG_X86_IO_APIC +extern int enable_update_mptable; extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, u32 gsi, int triggering, int polarity); #else -- cgit v1.2.3 From 6df8809bbd1b48cc6d428df7372ed749c8711641 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 15 Jun 2008 18:19:46 -0700 Subject: x86: use dstapic in mp_config_acpi_legacy_irqs so we don't get the same value multiple times. also make mp_config_acpi_legacy_irqs more readable by moving assignments together. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 4d370b1c5ae8..29b365a66cf3 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -962,8 +962,8 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) { - int ioapic = -1; - int pin = -1; + int ioapic; + int pin; /* * Convert 'gsi' to 'ioapic.pin'. @@ -997,8 +997,9 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) void __init mp_config_acpi_legacy_irqs(void) { - int i = 0; - int ioapic = -1; + int i; + int ioapic; + unsigned int dstapic; #if defined (CONFIG_MCA) || defined (CONFIG_EISA) /* @@ -1023,6 +1024,7 @@ void __init mp_config_acpi_legacy_irqs(void) ioapic = mp_find_ioapic(0); if (ioapic < 0) return; + dstapic = mp_ioapics[ioapic].mp_apicid; /* * Use the default configuration for the IRQs 0-15. Unless @@ -1031,11 +1033,6 @@ void __init mp_config_acpi_legacy_irqs(void) for (i = 0; i < 16; i++) { int idx; - mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ - mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; - mp_irqs[mp_irq_entries].mp_dstapic = mp_ioapics[ioapic].mp_apicid; - for (idx = 0; idx < mp_irq_entries; idx++) { struct mp_config_intsrc *irq = mp_irqs + idx; @@ -1045,9 +1042,8 @@ void __init mp_config_acpi_legacy_irqs(void) break; /* Do we already have a mapping for this IOAPIC pin */ - if ((irq->mp_dstapic == - mp_irqs[mp_irq_entries].mp_dstapic) && - (irq->mp_dstirq == i)) + if (irq->mp_dstapic == dstapic && + irq->mp_dstirq == i) break; } @@ -1056,8 +1052,12 @@ void __init mp_config_acpi_legacy_irqs(void) continue; /* IRQ already used */ } + mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; + mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ + mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; + mp_irqs[mp_irq_entries].mp_dstapic = dstapic; mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; - mp_irqs[mp_irq_entries].mp_srcbusirq = i; /* Identity mapped */ + mp_irqs[mp_irq_entries].mp_srcbusirq = i; /* Identity mapped */ mp_irqs[mp_irq_entries].mp_dstirq = i; if (++mp_irq_entries == MAX_IRQ_SOURCES) -- cgit v1.2.3 From d0be6bdea103b8d04c8a3495538b7c0011ae4129 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sun, 15 Jun 2008 18:58:51 -0700 Subject: x86: rename two e820 related functions rename update_memory_range to e820_update_range rename add_memory_region to e820_add_region to make it more clear that they are about e820 map operations. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/aperture_64.c | 2 +- arch/x86/kernel/cpu/mtrr/main.c | 2 +- arch/x86/kernel/e820.c | 16 ++++++++-------- arch/x86/kernel/efi.c | 2 +- arch/x86/lguest/boot.c | 2 +- arch/x86/mach-default/setup.c | 4 ++-- arch/x86/mach-visws/setup.c | 6 +++--- arch/x86/mach-voyager/setup.c | 12 ++++++------ arch/x86/xen/setup.c | 4 ++-- include/asm-x86/e820.h | 4 ++-- 10 files changed, 27 insertions(+), 27 deletions(-) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 479926d9e004..66b140932b23 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -292,7 +292,7 @@ void __init early_gart_iommu_check(void) E820_RAM)) { /* reserved it, so we can resuse it in second kernel */ printk(KERN_INFO "update e820 for GART\n"); - add_memory_region(aper_base, aper_size, E820_RESERVED); + e820_add_region(aper_base, aper_size, E820_RESERVED); update_e820(); } return; diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index 0642201784e0..105afe12beb0 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -1440,7 +1440,7 @@ static u64 __init real_trim_memory(unsigned long start_pfn, trim_size <<= PAGE_SHIFT; trim_size -= trim_start; - return update_memory_range(trim_start, trim_size, E820_RAM, + return e820_update_range(trim_start, trim_size, E820_RAM, E820_RESERVED); } /** diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 774063f11be0..5051ce744b4e 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -94,7 +94,7 @@ int __init e820_all_mapped(u64 start, u64 end, unsigned type) /* * Add a memory region to the kernel e820 map. */ -void __init add_memory_region(u64 start, u64 size, int type) +void __init e820_add_region(u64 start, u64 size, int type) { int x = e820.nr_map; @@ -384,12 +384,12 @@ int __init copy_e820_map(struct e820entry *biosmap, int nr_map) if (start > end) return -1; - add_memory_region(start, size, type); + e820_add_region(start, size, type); } while (biosmap++, --nr_map); return 0; } -u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, +u64 __init e820_update_range(u64 start, u64 size, unsigned old_type, unsigned new_type) { int i; @@ -414,7 +414,7 @@ u64 __init update_memory_range(u64 start, u64 size, unsigned old_type, final_end = min(start + size, ei->addr + ei->size); if (final_start >= final_end) continue; - add_memory_region(final_start, final_end - final_start, + e820_add_region(final_start, final_end - final_start, new_type); real_updated_size += final_end - final_start; } @@ -774,7 +774,7 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) return 0; addr = round_down(start + size - sizet, align); - update_memory_range(addr, sizet, E820_RAM, E820_RESERVED); + e820_update_range(addr, sizet, E820_RAM, E820_RESERVED); printk(KERN_INFO "update e820 for early_reserve_e820\n"); update_e820(); @@ -949,13 +949,13 @@ static int __init parse_memmap_opt(char *p) userdef = 1; if (*p == '@') { start_at = memparse(p+1, &p); - add_memory_region(start_at, mem_size, E820_RAM); + e820_add_region(start_at, mem_size, E820_RAM); } else if (*p == '#') { start_at = memparse(p+1, &p); - add_memory_region(start_at, mem_size, E820_ACPI); + e820_add_region(start_at, mem_size, E820_ACPI); } else if (*p == '$') { start_at = memparse(p+1, &p); - add_memory_region(start_at, mem_size, E820_RESERVED); + e820_add_region(start_at, mem_size, E820_RESERVED); } else { end_user_pfn = (mem_size >> PAGE_SHIFT); } diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index d5c7fcdd1861..473c89fe5073 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -233,7 +233,7 @@ static void __init add_efi_memmap(void) e820_type = E820_RAM; else e820_type = E820_RESERVED; - add_memory_region(start, size, e820_type); + e820_add_region(start, size, e820_type); } sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); } diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 5e4772907c6e..e72cf0793fbe 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -835,7 +835,7 @@ static __init char *lguest_memory_setup(void) /* The Linux bootloader header contains an "e820" memory map: the * Launcher populated the first entry with our memory limit. */ - add_memory_region(boot_params.e820_map[0].addr, + e820_add_region(boot_params.e820_map[0].addr, boot_params.e820_map[0].size, boot_params.e820_map[0].type); diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c index 56b4c39cb7fa..7ae692a76769 100644 --- a/arch/x86/mach-default/setup.c +++ b/arch/x86/mach-default/setup.c @@ -184,8 +184,8 @@ char * __init machine_specific_memory_setup(void) } e820.nr_map = 0; - add_memory_region(0, LOWMEMSIZE(), E820_RAM); - add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM); + e820_add_region(0, LOWMEMSIZE(), E820_RAM); + e820_add_region(HIGH_MEMORY, mem_size << 10, E820_RAM); } return who; } diff --git a/arch/x86/mach-visws/setup.c b/arch/x86/mach-visws/setup.c index de4c9dbd086f..d67868ec9b7f 100644 --- a/arch/x86/mach-visws/setup.c +++ b/arch/x86/mach-visws/setup.c @@ -175,9 +175,9 @@ char * __init machine_specific_memory_setup(void) sgivwfb_mem_size &= ~((1 << 20) - 1); sgivwfb_mem_phys = mem_size - gfx_mem_size; - add_memory_region(0, LOWMEMSIZE(), E820_RAM); - add_memory_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM); - add_memory_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED); + e820_add_region(0, LOWMEMSIZE(), E820_RAM); + e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM); + e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED); return "PROM"; } diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c index f4aca9fa9546..f27b583154e5 100644 --- a/arch/x86/mach-voyager/setup.c +++ b/arch/x86/mach-voyager/setup.c @@ -74,7 +74,7 @@ char *__init machine_specific_memory_setup(void) e820.nr_map = 0; for (i = 0; voyager_memory_detect(i, &addr, &length); i++) { - add_memory_region(addr, length, E820_RAM); + e820_add_region(addr, length, E820_RAM); } return who; } else if (voyager_level == 4) { @@ -92,14 +92,14 @@ char *__init machine_specific_memory_setup(void) tom = (boot_params.screen_info.ext_mem_k) << 10; } who = "Voyager-TOM"; - add_memory_region(0, 0x9f000, E820_RAM); + e820_add_region(0, 0x9f000, E820_RAM); /* map from 1M to top of memory */ - add_memory_region(1 * 1024 * 1024, tom - 1 * 1024 * 1024, + e820_add_region(1 * 1024 * 1024, tom - 1 * 1024 * 1024, E820_RAM); /* FIXME: Should check the ASICs to see if I need to * take out the 8M window. Just do it at the moment * */ - add_memory_region(8 * 1024 * 1024, 8 * 1024 * 1024, + e820_add_region(8 * 1024 * 1024, 8 * 1024 * 1024, E820_RESERVED); return who; } @@ -131,8 +131,8 @@ char *__init machine_specific_memory_setup(void) } e820.nr_map = 0; - add_memory_region(0, LOWMEMSIZE(), E820_RAM); - add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM); + e820_add_region(0, LOWMEMSIZE(), E820_RAM); + e820_add_region(HIGH_MEMORY, mem_size << 10, E820_RAM); } return who; } diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 82517e4a752a..9001c9df04d8 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -39,8 +39,8 @@ char * __init xen_memory_setup(void) unsigned long max_pfn = xen_start_info->nr_pages; e820.nr_map = 0; - add_memory_region(0, LOWMEMSIZE(), E820_RAM); - add_memory_region(HIGH_MEMORY, PFN_PHYS(max_pfn)-HIGH_MEMORY, E820_RAM); + e820_add_region(0, LOWMEMSIZE(), E820_RAM); + e820_add_region(HIGH_MEMORY, PFN_PHYS(max_pfn)-HIGH_MEMORY, E820_RAM); return "Xen"; } diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index a5959e3a5626..6b0ce745a60c 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -60,12 +60,12 @@ extern struct e820map e820; extern int e820_any_mapped(u64 start, u64 end, unsigned type); extern int e820_all_mapped(u64 start, u64 end, unsigned type); -extern void add_memory_region(u64 start, u64 size, int type); +extern void e820_add_region(u64 start, u64 size, int type); extern void e820_print_map(char *who); extern int sanitize_e820_map(struct e820entry *biosmap, int max_nr_map, int *pnr_map); extern int copy_e820_map(struct e820entry *biosmap, int nr_map); -extern u64 update_memory_range(u64 start, u64 size, unsigned old_type, +extern u64 e820_update_range(u64 start, u64 size, unsigned old_type, unsigned new_type); extern void update_e820(void); extern void e820_setup_gap(void); -- cgit v1.2.3 From b5bc6c0e55000dab86b73f838f5ad02908b23755 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 14 Jun 2008 18:32:52 -0700 Subject: x86, mm: use add_highpages_with_active_regions() for high pages init v2 use early_node_map to init high pages, so we can remove page_is_ram() and page_is_reserved_early() in the big loop with add_one_highpage also remove page_is_reserved_early(), it is not needed anymore. v2: fix the build of other platforms Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 11 -------- arch/x86/mm/discontig_32.c | 19 ++++++-------- arch/x86/mm/init_32.c | 62 ++++++++++++++++++++++++++++++++++++++-------- include/asm-x86/e820.h | 1 - include/asm-x86/highmem.h | 3 +++ include/linux/mm.h | 2 ++ mm/page_alloc.c | 8 ++++++ 7 files changed, 71 insertions(+), 35 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 5051ce744b4e..ed46b7a6bc13 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -612,17 +612,6 @@ void __init free_early(u64 start, u64 end) early_res[j - 1].end = 0; } -int __init page_is_reserved_early(unsigned long pagenr) -{ - u64 start = (u64)pagenr << PAGE_SHIFT; - int i; - struct early_res *r; - - i = find_overlapped_early(start, start + PAGE_SIZE); - r = &early_res[i]; - return (i < MAX_EARLY_RES && r->end); -} - void __init early_res_to_bootmem(u64 start, u64 end) { int i; diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index c3f119e99e0d..7c4d0255f8d8 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -100,7 +100,6 @@ unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn, #endif extern unsigned long find_max_low_pfn(void); -extern void add_one_highpage_init(struct page *, int, int); extern unsigned long highend_pfn, highstart_pfn; #define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE) @@ -432,10 +431,10 @@ void __init set_highmem_pages_init(int bad_ppro) { #ifdef CONFIG_HIGHMEM struct zone *zone; - struct page *page; + int nid; for_each_zone(zone) { - unsigned long node_pfn, zone_start_pfn, zone_end_pfn; + unsigned long zone_start_pfn, zone_end_pfn; if (!is_highmem(zone)) continue; @@ -443,16 +442,12 @@ void __init set_highmem_pages_init(int bad_ppro) zone_start_pfn = zone->zone_start_pfn; zone_end_pfn = zone_start_pfn + zone->spanned_pages; + nid = zone_to_nid(zone); printk("Initializing %s for node %d (%08lx:%08lx)\n", - zone->name, zone_to_nid(zone), - zone_start_pfn, zone_end_pfn); - - for (node_pfn = zone_start_pfn; node_pfn < zone_end_pfn; node_pfn++) { - if (!pfn_valid(node_pfn)) - continue; - page = pfn_to_page(node_pfn); - add_one_highpage_init(page, node_pfn, bad_ppro); - } + zone->name, nid, zone_start_pfn, zone_end_pfn); + + add_highpages_with_active_regions(nid, zone_start_pfn, + zone_end_pfn, bad_ppro); } totalram_pages += totalhigh_pages; #endif diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index abadb1da70df..ba07a489230e 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -287,10 +287,10 @@ static void __init permanent_kmaps_init(pgd_t *pgd_base) pkmap_page_table = pte; } -void __init add_one_highpage_init(struct page *page, int pfn, int bad_ppro) +static void __init +add_one_highpage_init(struct page *page, int pfn, int bad_ppro) { - if (page_is_ram(pfn) && !(bad_ppro && page_kills_ppro(pfn)) && - !page_is_reserved_early(pfn)) { + if (!(bad_ppro && page_kills_ppro(pfn))) { ClearPageReserved(page); init_page_count(page); __free_page(page); @@ -299,18 +299,58 @@ void __init add_one_highpage_init(struct page *page, int pfn, int bad_ppro) SetPageReserved(page); } +struct add_highpages_data { + unsigned long start_pfn; + unsigned long end_pfn; + int bad_ppro; +}; + +static void __init add_highpages_work_fn(unsigned long start_pfn, + unsigned long end_pfn, void *datax) +{ + int node_pfn; + struct page *page; + unsigned long final_start_pfn, final_end_pfn; + struct add_highpages_data *data; + int bad_ppro; + + data = (struct add_highpages_data *)datax; + bad_ppro = data->bad_ppro; + + final_start_pfn = max(start_pfn, data->start_pfn); + final_end_pfn = min(end_pfn, data->end_pfn); + if (final_start_pfn >= final_end_pfn) + return; + + for (node_pfn = final_start_pfn; node_pfn < final_end_pfn; + node_pfn++) { + if (!pfn_valid(node_pfn)) + continue; + page = pfn_to_page(node_pfn); + add_one_highpage_init(page, node_pfn, bad_ppro); + } + +} + +void __init add_highpages_with_active_regions(int nid, unsigned long start_pfn, + unsigned long end_pfn, + int bad_ppro) +{ + struct add_highpages_data data; + + data.start_pfn = start_pfn; + data.end_pfn = end_pfn; + data.bad_ppro = bad_ppro; + + work_with_active_regions(nid, add_highpages_work_fn, &data); +} + #ifndef CONFIG_NUMA static void __init set_highmem_pages_init(int bad_ppro) { - int pfn; + add_highpages_with_active_regions(0, highstart_pfn, highend_pfn, + bad_ppro); - for (pfn = highstart_pfn; pfn < highend_pfn; pfn++) { - /* - * Holes under sparsemem might not have no mem_map[]: - */ - if (pfn_valid(pfn)) - add_one_highpage_init(pfn_to_page(pfn), pfn, bad_ppro); - } totalram_pages += totalhigh_pages; } #endif /* !CONFIG_NUMA */ diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 6b0ce745a60c..55d310596907 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -86,7 +86,6 @@ extern u64 find_e820_area_size(u64 start, u64 *sizep, u64 align); extern void reserve_early(u64 start, u64 end, char *name); extern void free_early(u64 start, u64 end); extern void early_res_to_bootmem(u64 start, u64 end); -extern int page_is_reserved_early(unsigned long pagenr); extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align); extern unsigned long e820_end_of_ram(void); diff --git a/include/asm-x86/highmem.h b/include/asm-x86/highmem.h index e153f3b44774..85c4fea41ff6 100644 --- a/include/asm-x86/highmem.h +++ b/include/asm-x86/highmem.h @@ -74,6 +74,9 @@ struct page *kmap_atomic_to_page(void *ptr); #define flush_cache_kmaps() do { } while (0) +extern void add_highpages_with_active_regions(int nid, unsigned long start_pfn, + unsigned long end_pfn, int bad_ppro); + #endif /* __KERNEL__ */ #endif /* _ASM_HIGHMEM_H */ diff --git a/include/linux/mm.h b/include/linux/mm.h index 034a3156d2f0..e4de460907c1 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1011,6 +1011,8 @@ extern unsigned long find_min_pfn_with_active_regions(void); extern unsigned long find_max_pfn_with_active_regions(void); extern void free_bootmem_with_active_regions(int nid, unsigned long max_low_pfn); +typedef void (*work_fn_t)(unsigned long, unsigned long, void *); +extern void work_with_active_regions(int nid, work_fn_t work_fn, void *data); extern void sparse_memory_present_with_active_regions(int nid); #ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID extern int early_pfn_to_nid(unsigned long pfn); diff --git a/mm/page_alloc.c b/mm/page_alloc.c index d80e1868e570..41c6e3aa059f 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2929,6 +2929,14 @@ void __init free_bootmem_with_active_regions(int nid, } } +void __init work_with_active_regions(int nid, work_fn_t work_fn, void *data) +{ + int i; + + for_each_active_range_index_in_nid(i, nid) + work_fn(early_node_map[i].start_pfn, early_node_map[i].end_pfn, + data); +} /** * sparse_memory_present_with_active_regions - Call memory_present for each active range * @nid: The node to call memory_present for. If MAX_NUMNODES, all nodes will be used. -- cgit v1.2.3 From 8c5beb50d3ec915d15c4d38aa37282309a65f14e Mon Sep 17 00:00:00 2001 From: "Huang, Ying" Date: Wed, 11 Jun 2008 11:33:39 +0800 Subject: x86 boot: pass E820 memory map entries more than 128 via linked list of setup data Because of the size limits of struct boot_params (zero page), the maximum number of E820 memory map entries can be passed to kernel is 128. As pointed by Paul Jackson, there is some machine produced by SGI with so many nodes that the number of E820 memory map entries is more than 128. To enabling Linux kernel on these system, a new setup data type named SETUP_E820_EXT is defined to pass additional memory map entries to Linux kernel. This patch is based on x86/auto-latest branch of git-x86 tree and has been tested on x86_64 and i386 platform. Signed-off-by: Huang Ying Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 59 +++++++++++++++++++++++++++++++++++---------- arch/x86/kernel/setup.c | 3 +++ include/asm-x86/bootparam.h | 1 + include/asm-x86/e820.h | 2 ++ 4 files changed, 52 insertions(+), 13 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index ed46b7a6bc13..544dd12c70f4 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -359,6 +359,26 @@ static struct e820entry new_bios[E820_X_MAX] __initdata; return 0; } +static int __init __copy_e820_map(struct e820entry *biosmap, int nr_map) +{ + while (nr_map) { + u64 start = biosmap->addr; + u64 size = biosmap->size; + u64 end = start + size; + u32 type = biosmap->type; + + /* Overflow in 64 bits? Ignore the memory map. */ + if (start > end) + return -1; + + e820_add_region(start, size, type); + + biosmap++; + nr_map--; + } + return 0; +} + /* * Copy the BIOS e820 map into a safe place. * @@ -374,19 +394,7 @@ int __init copy_e820_map(struct e820entry *biosmap, int nr_map) if (nr_map < 2) return -1; - do { - u64 start = biosmap->addr; - u64 size = biosmap->size; - u64 end = start + size; - u32 type = biosmap->type; - - /* Overflow in 64 bits? Ignore the memory map. */ - if (start > end) - return -1; - - e820_add_region(start, size, type); - } while (biosmap++, --nr_map); - return 0; + return __copy_e820_map(biosmap, nr_map); } u64 __init e820_update_range(u64 start, u64 size, unsigned old_type, @@ -496,6 +504,31 @@ __init void e820_setup_gap(void) pci_mem_start, gapstart, gapsize); } +/** + * Because of the size limitation of struct boot_params, only first + * 128 E820 memory entries are passed to kernel via + * boot_params.e820_map, others are passed via SETUP_E820_EXT node of + * linked list of struct setup_data, which is parsed here. + */ +void __init parse_e820_ext(struct setup_data *sdata, unsigned long pa_data) +{ + u32 map_len; + int entries; + struct e820entry *extmap; + + entries = sdata->len / sizeof(struct e820entry); + map_len = sdata->len + sizeof(struct setup_data); + if (map_len > PAGE_SIZE) + sdata = early_ioremap(pa_data, map_len); + extmap = (struct e820entry *)(sdata->data); + __copy_e820_map(extmap, entries); + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); + if (map_len > PAGE_SIZE) + early_iounmap(sdata, map_len); + printk(KERN_INFO "extended physical RAM map:\n"); + e820_print_map("extended"); +} + #if defined(CONFIG_X86_64) || \ (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION)) /** diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 45a5e247d450..5b0de38cde48 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -150,6 +150,9 @@ void __init parse_setup_data(void) while (pa_data) { data = early_ioremap(pa_data, PAGE_SIZE); switch (data->type) { + case SETUP_E820_EXT: + parse_e820_ext(data, pa_data); + break; default: break; } diff --git a/include/asm-x86/bootparam.h b/include/asm-x86/bootparam.h index 0a073904168b..876f21136660 100644 --- a/include/asm-x86/bootparam.h +++ b/include/asm-x86/bootparam.h @@ -11,6 +11,7 @@ /* setup data types */ #define SETUP_NONE 0 +#define SETUP_E820_EXT 1 /* extensible setup data list node */ struct setup_data { diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 55d310596907..77fc24d89163 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -69,6 +69,8 @@ extern u64 e820_update_range(u64 start, u64 size, unsigned old_type, unsigned new_type); extern void update_e820(void); extern void e820_setup_gap(void); +struct setup_data; +extern void parse_e820_ext(struct setup_data *data, unsigned long pa_data); #if defined(CONFIG_X86_64) || \ (defined(CONFIG_X86_32) && defined(CONFIG_HIBERNATION)) -- cgit v1.2.3 From 41c094fd3ca54f1a71233049cf136ff94c91f4ae Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 16 Jun 2008 13:03:31 -0700 Subject: x86: move e820_resource_resources to e820.c and make 32-bit resource registration more like 64 bit. also move probe_roms back to setup_32.c Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 32 +++++++ arch/x86/kernel/e820_32.c | 192 ----------------------------------------- arch/x86/kernel/e820_64.c | 24 ------ arch/x86/kernel/setup_32.c | 208 ++++++++++++++++++++++++++++++++++++++------- include/asm-x86/e820.h | 1 + include/asm-x86/e820_32.h | 4 - include/asm-x86/e820_64.h | 1 - 7 files changed, 208 insertions(+), 254 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 544dd12c70f4..432c49178577 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -998,3 +998,35 @@ void __init finish_e820_parsing(void) e820_print_map("user"); } } + +/* + * Mark e820 reserved areas as busy for the resource manager. + */ +void __init e820_reserve_resources(void) +{ + int i; + struct resource *res; + + res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map); + for (i = 0; i < e820.nr_map; i++) { + switch (e820.map[i].type) { + case E820_RAM: res->name = "System RAM"; break; + case E820_ACPI: res->name = "ACPI Tables"; break; + case E820_NVS: res->name = "ACPI Non-volatile Storage"; break; + default: res->name = "reserved"; + } + res->start = e820.map[i].addr; + res->end = res->start + e820.map[i].size - 1; +#ifndef CONFIG_RESOURCES_64BIT + if (res->end > 0x100000000ULL) { + res++; + continue; + } +#endif + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + insert_resource(&iomem_resource, res); + res++; + } +} + + diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c index 8de3df9548db..1205ccf086d7 100644 --- a/arch/x86/kernel/e820_32.c +++ b/arch/x86/kernel/e820_32.c @@ -15,198 +15,6 @@ #include #include -static struct resource system_rom_resource = { - .name = "System ROM", - .start = 0xf0000, - .end = 0xfffff, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}; - -static struct resource extension_rom_resource = { - .name = "Extension ROM", - .start = 0xe0000, - .end = 0xeffff, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}; - -static struct resource adapter_rom_resources[] = { { - .name = "Adapter ROM", - .start = 0xc8000, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}, { - .name = "Adapter ROM", - .start = 0, - .end = 0, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -} }; - -static struct resource video_rom_resource = { - .name = "Video ROM", - .start = 0xc0000, - .end = 0xc7fff, - .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM -}; - -#define ROMSIGNATURE 0xaa55 - -static int __init romsignature(const unsigned char *rom) -{ - const unsigned short * const ptr = (const unsigned short *)rom; - unsigned short sig; - - return probe_kernel_address(ptr, sig) == 0 && sig == ROMSIGNATURE; -} - -static int __init romchecksum(const unsigned char *rom, unsigned long length) -{ - unsigned char sum, c; - - for (sum = 0; length && probe_kernel_address(rom++, c) == 0; length--) - sum += c; - return !length && !sum; -} - -static void __init probe_roms(void) -{ - const unsigned char *rom; - unsigned long start, length, upper; - unsigned char c; - int i; - - /* video rom */ - upper = adapter_rom_resources[0].start; - for (start = video_rom_resource.start; start < upper; start += 2048) { - rom = isa_bus_to_virt(start); - if (!romsignature(rom)) - continue; - - video_rom_resource.start = start; - - if (probe_kernel_address(rom + 2, c) != 0) - continue; - - /* 0 < length <= 0x7f * 512, historically */ - length = c * 512; - - /* if checksum okay, trust length byte */ - if (length && romchecksum(rom, length)) - video_rom_resource.end = start + length - 1; - - request_resource(&iomem_resource, &video_rom_resource); - break; - } - - start = (video_rom_resource.end + 1 + 2047) & ~2047UL; - if (start < upper) - start = upper; - - /* system rom */ - request_resource(&iomem_resource, &system_rom_resource); - upper = system_rom_resource.start; - - /* check for extension rom (ignore length byte!) */ - rom = isa_bus_to_virt(extension_rom_resource.start); - if (romsignature(rom)) { - length = extension_rom_resource.end - extension_rom_resource.start + 1; - if (romchecksum(rom, length)) { - request_resource(&iomem_resource, &extension_rom_resource); - upper = extension_rom_resource.start; - } - } - - /* check for adapter roms on 2k boundaries */ - for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) { - rom = isa_bus_to_virt(start); - if (!romsignature(rom)) - continue; - - if (probe_kernel_address(rom + 2, c) != 0) - continue; - - /* 0 < length <= 0x7f * 512, historically */ - length = c * 512; - - /* but accept any length that fits if checksum okay */ - if (!length || start + length > upper || !romchecksum(rom, length)) - continue; - - adapter_rom_resources[i].start = start; - adapter_rom_resources[i].end = start + length - 1; - request_resource(&iomem_resource, &adapter_rom_resources[i]); - - start = adapter_rom_resources[i++].end & ~2047UL; - } -} - -/* - * Request address space for all standard RAM and ROM resources - * and also for regions reported as reserved by the e820. - */ -void __init init_iomem_resources(struct resource *code_resource, - struct resource *data_resource, - struct resource *bss_resource) -{ - int i; - - probe_roms(); - for (i = 0; i < e820.nr_map; i++) { - struct resource *res; -#ifndef CONFIG_RESOURCES_64BIT - if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL) - continue; -#endif - res = kzalloc(sizeof(struct resource), GFP_ATOMIC); - switch (e820.map[i].type) { - case E820_RAM: res->name = "System RAM"; break; - case E820_ACPI: res->name = "ACPI Tables"; break; - case E820_NVS: res->name = "ACPI Non-volatile Storage"; break; - default: res->name = "reserved"; - } - res->start = e820.map[i].addr; - res->end = res->start + e820.map[i].size - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; - if (request_resource(&iomem_resource, res)) { - kfree(res); - continue; - } - if (e820.map[i].type == E820_RAM) { - /* - * We don't know which RAM region contains kernel data, - * so we try it repeatedly and let the resource manager - * test it. - */ - request_resource(res, code_resource); - request_resource(res, data_resource); - request_resource(res, bss_resource); -#ifdef CONFIG_KEXEC - if (crashk_res.start != crashk_res.end) - request_resource(res, &crashk_res); -#endif - } - } -} - /* Overridden in paravirt.c if CONFIG_PARAVIRT */ char * __init __attribute__((weak)) memory_setup(void) { diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 47952b1690b6..cb03bff9fa2f 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -41,30 +41,6 @@ unsigned long end_pfn; */ unsigned long max_pfn_mapped; -/* - * Mark e820 reserved areas as busy for the resource manager. - */ -void __init e820_reserve_resources(void) -{ - int i; - struct resource *res; - - res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map); - for (i = 0; i < e820.nr_map; i++) { - switch (e820.map[i].type) { - case E820_RAM: res->name = "System RAM"; break; - case E820_ACPI: res->name = "ACPI Tables"; break; - case E820_NVS: res->name = "ACPI Non-volatile Storage"; break; - default: res->name = "reserved"; - } - res->start = e820.map[i].addr; - res->end = res->start + e820.map[i].size - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; - insert_resource(&iomem_resource, res); - res++; - } -} - static void early_panic(char *msg) { early_printk(msg); diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 72b11d4557b7..f3ddba5ed9a7 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -445,25 +445,28 @@ static void __init reserve_crashkernel(void) ret = parse_crashkernel(boot_command_line, total_mem, &crash_size, &crash_base); if (ret == 0 && crash_size > 0) { - if (crash_base > 0) { - printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " - "for crashkernel (System RAM: %ldMB)\n", - (unsigned long)(crash_size >> 20), - (unsigned long)(crash_base >> 20), - (unsigned long)(total_mem >> 20)); - - if (reserve_bootmem(crash_base, crash_size, - BOOTMEM_EXCLUSIVE) < 0) { - printk(KERN_INFO "crashkernel reservation " - "failed - memory is in use\n"); - return; - } - - crashk_res.start = crash_base; - crashk_res.end = crash_base + crash_size - 1; - } else + if (crash_base <= 0) { printk(KERN_INFO "crashkernel reservation failed - " "you have to specify a base address\n"); + return; + } + + if (reserve_bootmem_generic(crash_base, crash_size, + BOOTMEM_EXCLUSIVE) < 0) { + printk(KERN_INFO "crashkernel reservation failed - " + "memory is in use\n"); + return; + } + + printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " + "for crashkernel (System RAM: %ldMB)\n", + (unsigned long)(crash_size >> 20), + (unsigned long)(crash_base >> 20), + (unsigned long)(total_mem >> 20)); + + crashk_res.start = crash_base; + crashk_res.end = crash_base + crash_size - 1; + insert_resource(&iomem_resource, &crashk_res); } } #else @@ -675,6 +678,8 @@ int x86_cpu_to_node_map_init[NR_CPUS] = { DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE; #endif +static void probe_roms(void); + /* * Determine if we were loaded by an EFI loader. If so, then we have also been * passed the efi memmap, systab, etc., so we should use these data structures @@ -684,6 +689,7 @@ DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE; */ void __init setup_arch(char **cmdline_p) { + int i; unsigned long max_low_pfn; memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); @@ -745,6 +751,13 @@ void __init setup_arch(char **cmdline_p) finish_e820_parsing(); + probe_roms(); + + /* after parse_early_param, so could debug it */ + insert_resource(&iomem_resource, &code_resource); + insert_resource(&iomem_resource, &data_resource); + insert_resource(&iomem_resource, &bss_resource); + strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = command_line; @@ -861,9 +874,16 @@ void __init setup_arch(char **cmdline_p) "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n"); #endif - e820_setup_gap(); + e820_reserve_resources(); e820_mark_nosave_regions(max_low_pfn); + request_resource(&iomem_resource, &video_ram_resource); + /* request I/O space for devices used on all i[345]86 PCs */ + for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) + request_resource(&ioport_resource, &standard_io_resources[i]); + + e820_setup_gap(); + #ifdef CONFIG_VT #if defined(CONFIG_VGA_CONSOLE) if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY)) @@ -874,25 +894,147 @@ void __init setup_arch(char **cmdline_p) #endif } -/* - * Request address space for all standard resources - * - * This is called just before pcibios_init(), which is also a - * subsys_initcall, but is linked in later (in arch/i386/pci/common.c). - */ -static int __init request_standard_resources(void) +static struct resource system_rom_resource = { + .name = "System ROM", + .start = 0xf0000, + .end = 0xfffff, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}; + +static struct resource extension_rom_resource = { + .name = "Extension ROM", + .start = 0xe0000, + .end = 0xeffff, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}; + +static struct resource adapter_rom_resources[] = { { + .name = "Adapter ROM", + .start = 0xc8000, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}, { + .name = "Adapter ROM", + .start = 0, + .end = 0, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +} }; + +static struct resource video_rom_resource = { + .name = "Video ROM", + .start = 0xc0000, + .end = 0xc7fff, + .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM +}; + +#define ROMSIGNATURE 0xaa55 + +static int __init romsignature(const unsigned char *rom) +{ + const unsigned short * const ptr = (const unsigned short *)rom; + unsigned short sig; + + return probe_kernel_address(ptr, sig) == 0 && sig == ROMSIGNATURE; +} + +static int __init romchecksum(const unsigned char *rom, unsigned long length) +{ + unsigned char sum, c; + + for (sum = 0; length && probe_kernel_address(rom++, c) == 0; length--) + sum += c; + return !length && !sum; +} + +static void __init probe_roms(void) { + const unsigned char *rom; + unsigned long start, length, upper; + unsigned char c; int i; - printk(KERN_INFO "Setting up standard PCI resources\n"); - init_iomem_resources(&code_resource, &data_resource, &bss_resource); + /* video rom */ + upper = adapter_rom_resources[0].start; + for (start = video_rom_resource.start; start < upper; start += 2048) { + rom = isa_bus_to_virt(start); + if (!romsignature(rom)) + continue; - request_resource(&iomem_resource, &video_ram_resource); + video_rom_resource.start = start; - /* request I/O space for devices used on all i[345]86 PCs */ - for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) - request_resource(&ioport_resource, &standard_io_resources[i]); - return 0; + if (probe_kernel_address(rom + 2, c) != 0) + continue; + + /* 0 < length <= 0x7f * 512, historically */ + length = c * 512; + + /* if checksum okay, trust length byte */ + if (length && romchecksum(rom, length)) + video_rom_resource.end = start + length - 1; + + request_resource(&iomem_resource, &video_rom_resource); + break; + } + + start = (video_rom_resource.end + 1 + 2047) & ~2047UL; + if (start < upper) + start = upper; + + /* system rom */ + request_resource(&iomem_resource, &system_rom_resource); + upper = system_rom_resource.start; + + /* check for extension rom (ignore length byte!) */ + rom = isa_bus_to_virt(extension_rom_resource.start); + if (romsignature(rom)) { + length = extension_rom_resource.end - extension_rom_resource.start + 1; + if (romchecksum(rom, length)) { + request_resource(&iomem_resource, &extension_rom_resource); + upper = extension_rom_resource.start; + } + } + + /* check for adapter roms on 2k boundaries */ + for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) { + rom = isa_bus_to_virt(start); + if (!romsignature(rom)) + continue; + + if (probe_kernel_address(rom + 2, c) != 0) + continue; + + /* 0 < length <= 0x7f * 512, historically */ + length = c * 512; + + /* but accept any length that fits if checksum okay */ + if (!length || start + length > upper || !romchecksum(rom, length)) + continue; + + adapter_rom_resources[i].start = start; + adapter_rom_resources[i].end = start + length - 1; + request_resource(&iomem_resource, &adapter_rom_resources[i]); + + start = adapter_rom_resources[i++].end & ~2047UL; + } } -subsys_initcall(request_standard_resources); diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 77fc24d89163..e860fe758e79 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -100,6 +100,7 @@ extern void e820_register_active_regions(int nid, unsigned long start_pfn, unsigned long end_pfn); extern u64 e820_hole_size(u64 start, u64 end); extern void finish_e820_parsing(void); +extern void e820_reserve_resources(void); #endif /* __ASSEMBLY__ */ diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h index 9135ce6e617e..557b890549ff 100644 --- a/include/asm-x86/e820_32.h +++ b/include/asm-x86/e820_32.h @@ -20,9 +20,5 @@ extern void setup_memory_map(void); -extern void init_iomem_resources(struct resource *code_resource, - struct resource *data_resource, - struct resource *bss_resource); - #endif/*!__ASSEMBLY__*/ #endif/*__E820_HEADER*/ diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h index 478547c63222..8d992109969b 100644 --- a/include/asm-x86/e820_64.h +++ b/include/asm-x86/e820_64.h @@ -16,7 +16,6 @@ #ifndef __ASSEMBLY__ extern void setup_memory_region(void); extern void contig_e820_setup(void); -extern void e820_reserve_resources(void); extern int e820_any_non_reserved(unsigned long start, unsigned long end); extern int is_memory_any_valid(unsigned long start, unsigned long end); extern int e820_all_non_reserved(unsigned long start, unsigned long end); -- cgit v1.2.3 From cc9f7a0ccf000d4db5fbdc7b0ae48eefea102f69 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 16 Jun 2008 16:11:08 -0700 Subject: x86: kill bad_ppro so don't punish all other cpus without that problem when init highmem Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_32.c | 9 +++++++++ arch/x86/mm/discontig_32.c | 4 ++-- arch/x86/mm/init_32.c | 43 ++++++++++++------------------------------- include/asm-x86/highmem.h | 2 +- include/asm-x86/numa_32.h | 2 +- 5 files changed, 25 insertions(+), 35 deletions(-) diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index f3ddba5ed9a7..9692aeb8ecae 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -68,6 +68,7 @@ #include #include #include +#include /* This value is set up by the early boot code to point to the value immediately after the boot time page tables. It contains a *physical* @@ -764,6 +765,14 @@ void __init setup_arch(char **cmdline_p) if (efi_enabled) efi_init(); + if (ppro_with_ram_bug()) { + e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM, + E820_RESERVED); + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); + printk(KERN_INFO "fixed physical RAM map:\n"); + e820_print_map("bad_ppro"); + } + e820_register_active_regions(0, 0, -1UL); /* * partially used pages are not usable - thus diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c index 7c4d0255f8d8..6216e43b6e95 100644 --- a/arch/x86/mm/discontig_32.c +++ b/arch/x86/mm/discontig_32.c @@ -427,7 +427,7 @@ void __init zone_sizes_init(void) return; } -void __init set_highmem_pages_init(int bad_ppro) +void __init set_highmem_pages_init(void) { #ifdef CONFIG_HIGHMEM struct zone *zone; @@ -447,7 +447,7 @@ void __init set_highmem_pages_init(int bad_ppro) zone->name, nid, zone_start_pfn, zone_end_pfn); add_highpages_with_active_regions(nid, zone_start_pfn, - zone_end_pfn, bad_ppro); + zone_end_pfn); } totalram_pages += totalhigh_pages; #endif diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index ba07a489230e..fb5694d788bf 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -220,13 +220,6 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base) } } -static inline int page_kills_ppro(unsigned long pagenr) -{ - if (pagenr >= 0x70000 && pagenr <= 0x7003F) - return 1; - return 0; -} - /* * devmem_is_allowed() checks to see if /dev/mem access to a certain address * is valid. The argument is a physical page number. @@ -287,22 +280,17 @@ static void __init permanent_kmaps_init(pgd_t *pgd_base) pkmap_page_table = pte; } -static void __init -add_one_highpage_init(struct page *page, int pfn, int bad_ppro) +static void __init add_one_highpage_init(struct page *page, int pfn) { - if (!(bad_ppro && page_kills_ppro(pfn))) { - ClearPageReserved(page); - init_page_count(page); - __free_page(page); - totalhigh_pages++; - } else - SetPageReserved(page); + ClearPageReserved(page); + init_page_count(page); + __free_page(page); + totalhigh_pages++; } struct add_highpages_data { unsigned long start_pfn; unsigned long end_pfn; - int bad_ppro; }; static void __init add_highpages_work_fn(unsigned long start_pfn, @@ -312,10 +300,8 @@ static void __init add_highpages_work_fn(unsigned long start_pfn, struct page *page; unsigned long final_start_pfn, final_end_pfn; struct add_highpages_data *data; - int bad_ppro; data = (struct add_highpages_data *)datax; - bad_ppro = data->bad_ppro; final_start_pfn = max(start_pfn, data->start_pfn); final_end_pfn = min(end_pfn, data->end_pfn); @@ -327,29 +313,26 @@ static void __init add_highpages_work_fn(unsigned long start_pfn, if (!pfn_valid(node_pfn)) continue; page = pfn_to_page(node_pfn); - add_one_highpage_init(page, node_pfn, bad_ppro); + add_one_highpage_init(page, node_pfn); } } void __init add_highpages_with_active_regions(int nid, unsigned long start_pfn, - unsigned long end_pfn, - int bad_ppro) + unsigned long end_pfn) { struct add_highpages_data data; data.start_pfn = start_pfn; data.end_pfn = end_pfn; - data.bad_ppro = bad_ppro; work_with_active_regions(nid, add_highpages_work_fn, &data); } #ifndef CONFIG_NUMA -static void __init set_highmem_pages_init(int bad_ppro) +static void __init set_highmem_pages_init(void) { - add_highpages_with_active_regions(0, highstart_pfn, highend_pfn, - bad_ppro); + add_highpages_with_active_regions(0, highstart_pfn, highend_pfn); totalram_pages += totalhigh_pages; } @@ -358,7 +341,7 @@ static void __init set_highmem_pages_init(int bad_ppro) #else # define kmap_init() do { } while (0) # define permanent_kmaps_init(pgd_base) do { } while (0) -# define set_highmem_pages_init(bad_ppro) do { } while (0) +# define set_highmem_pages_init() do { } while (0) #endif /* CONFIG_HIGHMEM */ pteval_t __PAGE_KERNEL = _PAGE_KERNEL; @@ -605,13 +588,11 @@ static struct kcore_list kcore_mem, kcore_vmalloc; void __init mem_init(void) { int codesize, reservedpages, datasize, initsize; - int tmp, bad_ppro; + int tmp; #ifdef CONFIG_FLATMEM BUG_ON(!mem_map); #endif - bad_ppro = ppro_with_ram_bug(); - #ifdef CONFIG_HIGHMEM /* check that fixmap and pkmap do not overlap */ if (PKMAP_BASE + LAST_PKMAP*PAGE_SIZE >= FIXADDR_START) { @@ -634,7 +615,7 @@ void __init mem_init(void) if (page_is_ram(tmp) && PageReserved(pfn_to_page(tmp))) reservedpages++; - set_highmem_pages_init(bad_ppro); + set_highmem_pages_init(); codesize = (unsigned long) &_etext - (unsigned long) &_text; datasize = (unsigned long) &_edata - (unsigned long) &_etext; diff --git a/include/asm-x86/highmem.h b/include/asm-x86/highmem.h index 85c4fea41ff6..4514b16cc723 100644 --- a/include/asm-x86/highmem.h +++ b/include/asm-x86/highmem.h @@ -75,7 +75,7 @@ struct page *kmap_atomic_to_page(void *ptr); #define flush_cache_kmaps() do { } while (0) extern void add_highpages_with_active_regions(int nid, unsigned long start_pfn, - unsigned long end_pfn, int bad_ppro); + unsigned long end_pfn); #endif /* __KERNEL__ */ diff --git a/include/asm-x86/numa_32.h b/include/asm-x86/numa_32.h index 03d0f7a9bf02..a02674f64869 100644 --- a/include/asm-x86/numa_32.h +++ b/include/asm-x86/numa_32.h @@ -5,7 +5,7 @@ extern int pxm_to_nid(int pxm); #ifdef CONFIG_NUMA extern void __init remap_numa_kva(void); -extern void set_highmem_pages_init(int); +extern void set_highmem_pages_init(void); #else static inline void remap_numa_kva(void) { -- cgit v1.2.3 From 064d25f12014ae1d97c2882f9ab874995321f2b2 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 16 Jun 2008 19:58:28 -0700 Subject: x86: merge setup_memory_map with e820 ... and kill e820_32/64.c and e820_32/64.h Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/e820.c | 72 +++++++++++++++++++++++++++++++++ arch/x86/kernel/e820_32.c | 29 -------------- arch/x86/kernel/e820_64.c | 92 ------------------------------------------- arch/x86/kernel/setup_64.c | 8 +--- arch/x86/mach-default/setup.c | 47 ---------------------- arch/x86/mm/init_64.c | 12 ++++++ include/asm-x86/e820.h | 9 +++-- include/asm-x86/e820_32.h | 24 ----------- include/asm-x86/e820_64.h | 26 ------------ include/asm-x86/setup.h | 5 --- 11 files changed, 92 insertions(+), 234 deletions(-) delete mode 100644 arch/x86/kernel/e820_32.c delete mode 100644 arch/x86/kernel/e820_64.c delete mode 100644 include/asm-x86/e820_32.h delete mode 100644 include/asm-x86/e820_64.h diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index dc3c636d113e..bcc2b123dabf 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -22,7 +22,7 @@ obj-y += setup_$(BITS).o i8259_$(BITS).o setup.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o setup64.o -obj-y += bootflag.o e820_$(BITS).o e820.o +obj-y += bootflag.o e820.o obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o obj-$(CONFIG_X86_64) += bugs_64.o diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 432c49178577..49477484a2fa 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1029,4 +1029,76 @@ void __init e820_reserve_resources(void) } } +char *__init __attribute__((weak)) machine_specific_memory_setup(void) +{ + char *who = "BIOS-e820"; + int new_nr; + /* + * Try to copy the BIOS-supplied E820-map. + * + * Otherwise fake a memory map; one section from 0k->640k, + * the next section from 1mb->appropriate_mem_k + */ + new_nr = boot_params.e820_entries; + sanitize_e820_map(boot_params.e820_map, + ARRAY_SIZE(boot_params.e820_map), + &new_nr); + boot_params.e820_entries = new_nr; + if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { +#ifdef CONFIG_X86_64 + early_panic("Cannot find a valid memory map"); +#else + unsigned long mem_size; + + /* compare results from other methods and take the greater */ + if (boot_params.alt_mem_k + < boot_params.screen_info.ext_mem_k) { + mem_size = boot_params.screen_info.ext_mem_k; + who = "BIOS-88"; + } else { + mem_size = boot_params.alt_mem_k; + who = "BIOS-e801"; + } + + e820.nr_map = 0; + e820_add_region(0, LOWMEMSIZE(), E820_RAM); + e820_add_region(HIGH_MEMORY, mem_size << 10, E820_RAM); +#endif + } + + /* In case someone cares... */ + return who; +} + +/* Overridden in paravirt.c if CONFIG_PARAVIRT */ +char * __init __attribute__((weak)) memory_setup(void) +{ + return machine_specific_memory_setup(); +} + +void __init setup_memory_map(void) +{ + printk(KERN_INFO "BIOS-provided physical RAM map:\n"); + e820_print_map(memory_setup()); +} + +#ifdef CONFIG_X86_64 +int __init arch_get_ram_range(int slot, u64 *addr, u64 *size) +{ + int i; + if (slot < 0 || slot >= e820.nr_map) + return -1; + for (i = slot; i < e820.nr_map; i++) { + if (e820.map[i].type != E820_RAM) + continue; + break; + } + if (i == e820.nr_map || e820.map[i].addr > (max_pfn << PAGE_SHIFT)) + return -1; + *addr = e820.map[i].addr; + *size = min_t(u64, e820.map[i].size + e820.map[i].addr, + max_pfn << PAGE_SHIFT) - *addr; + return i + 1; +} +#endif diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c deleted file mode 100644 index 1205ccf086d7..000000000000 --- a/arch/x86/kernel/e820_32.c +++ /dev/null @@ -1,29 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Overridden in paravirt.c if CONFIG_PARAVIRT */ -char * __init __attribute__((weak)) memory_setup(void) -{ - return machine_specific_memory_setup(); -} - -void __init setup_memory_map(void) -{ - printk(KERN_INFO "BIOS-provided physical RAM map:\n"); - e820_print_map(memory_setup()); -} - diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c deleted file mode 100644 index cb03bff9fa2f..000000000000 --- a/arch/x86/kernel/e820_64.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Handle the memory map. - * The functions here do the job until bootmem takes over. - * - * Getting sanitize_e820_map() in sync with i386 version by applying change: - * - Provisions for empty E820 memory regions (reported by certain BIOSes). - * Alex Achenbach , December 2002. - * Venkatesh Pallipadi - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * PFN of last memory page. - */ -unsigned long end_pfn; - -/* - * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries. - * The direct mapping extends to max_pfn_mapped, so that we can directly access - * apertures, ACPI and other tables without having to play with fixmaps. - */ -unsigned long max_pfn_mapped; - -static void early_panic(char *msg) -{ - early_printk(msg); - panic(msg); -} - -/* We're not void only for x86 32-bit compat */ -char *__init machine_specific_memory_setup(void) -{ - char *who = "BIOS-e820"; - int new_nr; - /* - * Try to copy the BIOS-supplied E820-map. - * - * Otherwise fake a memory map; one section from 0k->640k, - * the next section from 1mb->appropriate_mem_k - */ - new_nr = boot_params.e820_entries; - sanitize_e820_map(boot_params.e820_map, - ARRAY_SIZE(boot_params.e820_map), - &new_nr); - boot_params.e820_entries = new_nr; - if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) - early_panic("Cannot find a valid memory map"); - printk(KERN_INFO "BIOS-provided physical RAM map:\n"); - e820_print_map(who); - - /* In case someone cares... */ - return who; -} - -int __init arch_get_ram_range(int slot, u64 *addr, u64 *size) -{ - int i; - - if (slot < 0 || slot >= e820.nr_map) - return -1; - for (i = slot; i < e820.nr_map; i++) { - if (e820.map[i].type != E820_RAM) - continue; - break; - } - if (i == e820.nr_map || e820.map[i].addr > (max_pfn << PAGE_SHIFT)) - return -1; - *addr = e820.map[i].addr; - *size = min_t(u64, e820.map[i].size + e820.map[i].addr, - max_pfn << PAGE_SHIFT) - *addr; - return i + 1; -} diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index ec65696ca2cd..3220c7b56eb3 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -266,12 +266,6 @@ static inline void __init reserve_crashkernel(void) {} #endif -/* Overridden in paravirt.c if CONFIG_PARAVIRT */ -void __attribute__((weak)) __init memory_setup(void) -{ - machine_specific_memory_setup(); -} - #ifdef CONFIG_PCI_MMCONFIG extern void __cpuinit fam10h_check_enable_mmcfg(void); extern void __init check_enable_amd_mmconf_dmi(void); @@ -316,7 +310,7 @@ void __init setup_arch(char **cmdline_p) ARCH_SETUP - memory_setup(); + setup_memory_map(); copy_edd(); if (!boot_params.hdr.root_flags) diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c index 7ae692a76769..2f5e277686b8 100644 --- a/arch/x86/mach-default/setup.c +++ b/arch/x86/mach-default/setup.c @@ -142,50 +142,3 @@ static int __init print_ipi_mode(void) late_initcall(print_ipi_mode); -/** - * machine_specific_memory_setup - Hook for machine specific memory setup. - * - * Description: - * This is included late in kernel/setup.c so that it can make - * use of all of the static functions. - **/ - -char * __init machine_specific_memory_setup(void) -{ - char *who; - int new_nr; - - - who = "BIOS-e820"; - - /* - * Try to copy the BIOS-supplied E820-map. - * - * Otherwise fake a memory map; one section from 0k->640k, - * the next section from 1mb->appropriate_mem_k - */ - new_nr = boot_params.e820_entries; - sanitize_e820_map(boot_params.e820_map, - ARRAY_SIZE(boot_params.e820_map), - &new_nr); - boot_params.e820_entries = new_nr; - if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) - < 0) { - unsigned long mem_size; - - /* compare results from other methods and take the greater */ - if (boot_params.alt_mem_k - < boot_params.screen_info.ext_mem_k) { - mem_size = boot_params.screen_info.ext_mem_k; - who = "BIOS-88"; - } else { - mem_size = boot_params.alt_mem_k; - who = "BIOS-e801"; - } - - e820.nr_map = 0; - e820_add_region(0, LOWMEMSIZE(), E820_RAM); - e820_add_region(HIGH_MEMORY, mem_size << 10, E820_RAM); - } - return who; -} diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index b8c2c1ef7ad5..5266f3141d6c 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -47,6 +47,18 @@ #include #include +/* + * PFN of last memory page. + */ +unsigned long end_pfn; + +/* + * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries. + * The direct mapping extends to max_pfn_mapped, so that we can directly access + * apertures, ACPI and other tables without having to play with fixmaps. + */ +unsigned long max_pfn_mapped; + static unsigned long dma_reserve __initdata; DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index e860fe758e79..83144cb6c68d 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -101,6 +101,9 @@ extern void e820_register_active_regions(int nid, unsigned long start_pfn, extern u64 e820_hole_size(u64 start, u64 end); extern void finish_e820_parsing(void); extern void e820_reserve_resources(void); +extern void setup_memory_map(void); +extern char *machine_specific_memory_setup(void); +extern char *memory_setup(void); #endif /* __ASSEMBLY__ */ @@ -111,10 +114,10 @@ extern void e820_reserve_resources(void); #define BIOS_END 0x00100000 #ifdef __KERNEL__ +#include + #ifdef CONFIG_X86_32 -# include "e820_32.h" -#else -# include "e820_64.h" +#define HIGH_MEMORY (1024*1024) #endif #endif /* __KERNEL__ */ diff --git a/include/asm-x86/e820_32.h b/include/asm-x86/e820_32.h deleted file mode 100644 index 557b890549ff..000000000000 --- a/include/asm-x86/e820_32.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * structures and definitions for the int 15, ax=e820 memory map - * scheme. - * - * In a nutshell, arch/i386/boot/setup.S populates a scratch table - * in the empty_zero_block that contains a list of usable address/size - * duples. In arch/i386/kernel/setup.c, this information is - * transferred into the e820map, and in arch/i386/mm/init.c, that - * new information is used to mark pages reserved or not. - * - */ -#ifndef __E820_HEADER -#define __E820_HEADER - -#include - -#define HIGH_MEMORY (1024*1024) - -#ifndef __ASSEMBLY__ - -extern void setup_memory_map(void); - -#endif/*!__ASSEMBLY__*/ -#endif/*__E820_HEADER*/ diff --git a/include/asm-x86/e820_64.h b/include/asm-x86/e820_64.h deleted file mode 100644 index 8d992109969b..000000000000 --- a/include/asm-x86/e820_64.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * structures and definitions for the int 15, ax=e820 memory map - * scheme. - * - * In a nutshell, setup.S populates a scratch table in the - * empty_zero_block that contains a list of usable address/size - * duples. setup.c, this information is transferred into the e820map, - * and in init.c/numa.c, that new information is used to mark pages - * reserved or not. - */ -#ifndef __E820_HEADER -#define __E820_HEADER - -#include - -#ifndef __ASSEMBLY__ -extern void setup_memory_region(void); -extern void contig_e820_setup(void); -extern int e820_any_non_reserved(unsigned long start, unsigned long end); -extern int is_memory_any_valid(unsigned long start, unsigned long end); -extern int e820_all_non_reserved(unsigned long start, unsigned long end); -extern int is_memory_all_valid(unsigned long start, unsigned long end); - -#endif/*!__ASSEMBLY__*/ - -#endif/*__E820_HEADER*/ diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h index 9e163fc3e984..b676b0be7986 100644 --- a/include/asm-x86/setup.h +++ b/include/asm-x86/setup.h @@ -8,7 +8,6 @@ /* Interrupt control for vSMPowered x86_64 systems */ void vsmp_init(void); -char *machine_specific_memory_setup(void); #ifndef CONFIG_PARAVIRT #define paravirt_post_allocator_init() do {} while (0) #endif @@ -50,10 +49,6 @@ extern struct boot_params boot_params; */ #define LOWMEMSIZE() (0x9f000) -char * __init machine_specific_memory_setup(void); -char *memory_setup(void); - - void __init i386_start_kernel(void); extern unsigned long init_pg_tables_start; -- cgit v1.2.3 From 593a0cc39046515a438ca9fcc168115961f9f503 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 17 Jun 2008 10:02:45 -0700 Subject: x86: move some function out of setup_bootmem_alloc ... to make it more like 64-bit. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_32.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 9692aeb8ecae..90a2b857b4a7 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -623,21 +623,6 @@ void __init setup_bootmem_allocator(void) free_bootmem_with_active_regions(i, max_low_pfn); early_res_to_bootmem(0, max_low_pfn< Date: Tue, 17 Jun 2008 15:39:01 -0700 Subject: x86: Kconfig cleanup with genericarch we already have summit and etc depends on genericarch, so use genericarch only. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 07276ac01c20..7ebd986050a8 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -446,7 +446,7 @@ config MEMTEST_BOOTPARAM_VALUE config ACPI_SRAT def_bool y - depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH) + depends on X86_32 && ACPI && NUMA && X86_GENERICARCH select ACPI_NUMA config HAVE_ARCH_PARSE_SRAT @@ -455,11 +455,11 @@ config HAVE_ARCH_PARSE_SRAT config X86_SUMMIT_NUMA def_bool y - depends on X86_32 && NUMA && (X86_SUMMIT || X86_GENERICARCH) + depends on X86_32 && NUMA && X86_GENERICARCH config X86_CYCLONE_TIMER def_bool y - depends on X86_32 && X86_SUMMIT || X86_GENERICARCH + depends on X86_GENERICARCH config ES7000_CLUSTERED_APIC def_bool y @@ -909,9 +909,9 @@ config X86_PAE config NUMA bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)" depends on SMP - depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH || X86_SUMMIT && ACPI) && EXPERIMENTAL) + depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL) default n if X86_PC - default y if (X86_NUMAQ || X86_SUMMIT || X86_GENERICARCH) + default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP) help Enable NUMA (Non Uniform Memory Access) support. The kernel will try to allocate memory used by a CPU on the -- cgit v1.2.3 From 1c6e55032e24ff79668581a0f296c278ef7edd4e Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Tue, 17 Jun 2008 15:41:45 -0700 Subject: x86: use acpi_numa_init to parse on 32-bit numa seperate SRAT finding and parsing from get_memcfg_from_srat, and let getmemcfg_from_srat only handle array from previous step. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_32.c | 36 +++++--- arch/x86/kernel/srat_32.c | 200 +++++++++++---------------------------------- include/asm-x86/acpi.h | 4 +- include/asm-x86/dmi.h | 8 -- 4 files changed, 75 insertions(+), 173 deletions(-) diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 90a2b857b4a7..7e06ecd83174 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -59,6 +59,7 @@ #include #include #include +#include #include #include #include @@ -184,6 +185,12 @@ int bootloader_type; /* user-defined highmem size */ static unsigned int highmem_pages = -1; +/* + * Early DMI memory + */ +int dmi_alloc_index; +char dmi_alloc_data[DMI_MAX_DATA]; + /* * Setup options */ @@ -775,6 +782,24 @@ void __init setup_arch(char **cmdline_p) max_pfn = e820_end_of_ram(); } + dmi_scan_machine(); + + io_delay_init(); + +#ifdef CONFIG_ACPI + /* + * Parse the ACPI tables for possible boot-time SMP configuration. + */ + acpi_boot_table_init(); +#endif + +#ifdef CONFIG_ACPI_NUMA + /* + * Parse SRAT to discover nodes. + */ + acpi_numa_init(); +#endif + max_low_pfn = setup_memory(); #ifdef CONFIG_ACPI_SLEEP @@ -841,10 +866,6 @@ void __init setup_arch(char **cmdline_p) paravirt_post_allocator_init(); - dmi_scan_machine(); - - io_delay_init(); - #ifdef CONFIG_X86_SMP /* * setup to use the early static init tables during kernel startup @@ -861,13 +882,6 @@ void __init setup_arch(char **cmdline_p) generic_apic_probe(); #endif -#ifdef CONFIG_ACPI - /* - * Parse the ACPI tables for possible boot-time SMP configuration. - */ - acpi_boot_table_init(); -#endif - early_quirks(); #ifdef CONFIG_ACPI diff --git a/arch/x86/kernel/srat_32.c b/arch/x86/kernel/srat_32.c index e9d91720a40f..5978023b799b 100644 --- a/arch/x86/kernel/srat_32.c +++ b/arch/x86/kernel/srat_32.c @@ -42,7 +42,7 @@ #define BMAP_TEST(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit))) /* bitmap length; _PXM is at most 255 */ #define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8) -static u8 pxm_bitmap[PXM_BITMAP_LEN]; /* bitmap of proximity domains */ +static u8 __initdata pxm_bitmap[PXM_BITMAP_LEN]; /* bitmap of proximity domains */ #define MAX_CHUNKS_PER_NODE 3 #define MAXCHUNKS (MAX_CHUNKS_PER_NODE * MAX_NUMNODES) @@ -53,16 +53,37 @@ struct node_memory_chunk_s { u8 nid; // which cnode contains this chunk? u8 bank; // which mem bank on this node }; -static struct node_memory_chunk_s node_memory_chunk[MAXCHUNKS]; +static struct node_memory_chunk_s __initdata node_memory_chunk[MAXCHUNKS]; -static int num_memory_chunks; /* total number of memory chunks */ +static int __initdata num_memory_chunks; /* total number of memory chunks */ static u8 __initdata apicid_to_pxm[MAX_APICID]; +int numa_off __initdata; +int acpi_numa __initdata; + +static __init void bad_srat(void) +{ + printk(KERN_ERR "SRAT: SRAT not used.\n"); + acpi_numa = -1; + num_memory_chunks = 0; +} + +static __init inline int srat_disabled(void) +{ + return numa_off || acpi_numa < 0; +} + /* Identify CPU proximity domains */ -static void __init parse_cpu_affinity_structure(char *p) +void __init +acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *cpu_affinity) { - struct acpi_srat_cpu_affinity *cpu_affinity = - (struct acpi_srat_cpu_affinity *) p; + if (srat_disabled()) + return; + if (cpu_affinity->header.length != + sizeof(struct acpi_srat_cpu_affinity)) { + bad_srat(); + return; + } if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0) return; /* empty entry */ @@ -80,14 +101,21 @@ static void __init parse_cpu_affinity_structure(char *p) * Identify memory proximity domains and hot-remove capabilities. * Fill node memory chunk list structure. */ -static void __init parse_memory_affinity_structure (char *sratp) +void __init +acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *memory_affinity) { unsigned long long paddr, size; unsigned long start_pfn, end_pfn; u8 pxm; struct node_memory_chunk_s *p, *q, *pend; - struct acpi_srat_mem_affinity *memory_affinity = - (struct acpi_srat_mem_affinity *) sratp; + + if (srat_disabled()) + return; + if (memory_affinity->header.length != + sizeof(struct acpi_srat_mem_affinity)) { + bad_srat(); + return; + } if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0) return; /* empty entry */ @@ -135,6 +163,14 @@ static void __init parse_memory_affinity_structure (char *sratp) "enabled and removable" : "enabled" ) ); } +/* Callback for SLIT parsing */ +void __init acpi_numa_slit_init(struct acpi_table_slit *slit) +{ +} + +void acpi_numa_arch_fixup(void) +{ +} /* * The SRAT table always lists ascending addresses, so can always * assume that the first "start" address that you see is the real @@ -167,39 +203,13 @@ static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_c node_end_pfn[nid] = memory_chunk->end_pfn; } -/* Parse the ACPI Static Resource Affinity Table */ -static int __init acpi20_parse_srat(struct acpi_table_srat *sratp) +int __init get_memcfg_from_srat(void) { - u8 *start, *end, *p; int i, j, nid; - start = (u8 *)(&(sratp->reserved) + 1); /* skip header */ - p = start; - end = (u8 *)sratp + sratp->header.length; - memset(pxm_bitmap, 0, sizeof(pxm_bitmap)); /* init proximity domain bitmap */ - memset(node_memory_chunk, 0, sizeof(node_memory_chunk)); - - num_memory_chunks = 0; - while (p < end) { - switch (*p) { - case ACPI_SRAT_TYPE_CPU_AFFINITY: - parse_cpu_affinity_structure(p); - break; - case ACPI_SRAT_TYPE_MEMORY_AFFINITY: - parse_memory_affinity_structure(p); - break; - default: - printk("ACPI 2.0 SRAT: unknown entry skipped: type=0x%02X, len=%d\n", p[0], p[1]); - break; - } - p += p[1]; - if (p[1] == 0) { - printk("acpi20_parse_srat: Entry length value is zero;" - " can't parse any further!\n"); - break; - } - } + if (srat_disabled()) + goto out_fail; if (num_memory_chunks == 0) { printk("could not finy any ACPI SRAT memory areas.\n"); @@ -248,7 +258,7 @@ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp) e820_register_active_regions(chunk->nid, chunk->start_pfn, min(chunk->end_pfn, max_pfn)); } - + for_each_online_node(nid) { unsigned long start = node_start_pfn[nid]; unsigned long end = min(node_end_pfn[nid], max_pfn); @@ -258,118 +268,6 @@ static int __init acpi20_parse_srat(struct acpi_table_srat *sratp) } return 1; out_fail: - return 0; -} - -struct acpi_static_rsdt { - struct acpi_table_rsdt table; - u32 padding[32]; /* Allow for 32 more table entries */ -}; - -int __init get_memcfg_from_srat(void) -{ - struct acpi_table_header *header = NULL; - struct acpi_table_rsdp *rsdp = NULL; - struct acpi_table_rsdt *rsdt = NULL; - acpi_native_uint rsdp_address = 0; - struct acpi_static_rsdt saved_rsdt; - int tables = 0; - int i = 0; - - rsdp_address = acpi_os_get_root_pointer(); - if (!rsdp_address) { - printk("%s: System description tables not found\n", - __func__); - goto out_err; - } - - printk("%s: assigning address to rsdp\n", __func__); - rsdp = (struct acpi_table_rsdp *)(u32)rsdp_address; - if (!rsdp) { - printk("%s: Didn't find ACPI root!\n", __func__); - goto out_err; - } - - printk(KERN_INFO "%.8s v%d [%.6s]\n", rsdp->signature, rsdp->revision, - rsdp->oem_id); - - if (strncmp(rsdp->signature, ACPI_SIG_RSDP,strlen(ACPI_SIG_RSDP))) { - printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __func__); - goto out_err; - } - - rsdt = (struct acpi_table_rsdt *) - early_ioremap(rsdp->rsdt_physical_address, sizeof(saved_rsdt)); - - if (!rsdt) { - printk(KERN_WARNING - "%s: ACPI: Invalid root system description tables (RSDT)\n", - __func__); - goto out_err; - } - - header = &rsdt->header; - - if (strncmp(header->signature, ACPI_SIG_RSDT, strlen(ACPI_SIG_RSDT))) { - printk(KERN_WARNING "ACPI: RSDT signature incorrect\n"); - early_iounmap(rsdt, sizeof(saved_rsdt)); - goto out_err; - } - - /* - * The number of tables is computed by taking the - * size of all entries (header size minus total - * size of RSDT) divided by the size of each entry - * (4-byte table pointers). - */ - tables = (header->length - sizeof(struct acpi_table_header)) / sizeof(u32); - - if (!tables) - goto out_err; - - memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt)); - early_iounmap(rsdt, sizeof(saved_rsdt)); - if (saved_rsdt.table.header.length > sizeof(saved_rsdt)) { - printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n", - saved_rsdt.table.header.length); - goto out_err; - } - - printk("Begin SRAT table scan....%d\n", tables); - - for (i = 0; i < tables; i++){ - int result; - u32 length; - /* Map in header, then map in full table length. */ - header = (struct acpi_table_header *) - early_ioremap(saved_rsdt.table.table_offset_entry[i], sizeof(struct acpi_table_header)); - if (!header) - break; - - printk(KERN_INFO "ACPI: %4.4s %08lX, %04X\n", - header->signature, - (unsigned long)saved_rsdt.table.table_offset_entry[i], - header->length); - - if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4)) { - early_iounmap(header, sizeof(struct acpi_table_header)); - continue; - } - - length = header->length; - early_iounmap(header, sizeof(struct acpi_table_header)); - header = (struct acpi_table_header *) - early_ioremap(saved_rsdt.table.table_offset_entry[i], length); - if (!header) - break; - - /* we've found the srat table. don't need to look at any more tables */ - result = acpi20_parse_srat((struct acpi_table_srat *)header); - early_iounmap(header, length); - return result; - } -out_err: - remove_all_active_ranges(); printk("failed to get NUMA memory information from SRAT table\n"); return 0; } diff --git a/include/asm-x86/acpi.h b/include/asm-x86/acpi.h index 73ce5b32443f..635d764dc13e 100644 --- a/include/asm-x86/acpi.h +++ b/include/asm-x86/acpi.h @@ -161,9 +161,7 @@ struct bootnode; #ifdef CONFIG_ACPI_NUMA extern int acpi_numa; extern int acpi_scan_nodes(unsigned long start, unsigned long end); -#ifdef CONFIG_X86_64 -# define NR_NODE_MEMBLKS (MAX_NUMNODES*2) -#endif +#define NR_NODE_MEMBLKS (MAX_NUMNODES*2) extern void acpi_fake_nodes(const struct bootnode *fake_nodes, int num_nodes); #else diff --git a/include/asm-x86/dmi.h b/include/asm-x86/dmi.h index 4edf7514a750..58a86571fe0f 100644 --- a/include/asm-x86/dmi.h +++ b/include/asm-x86/dmi.h @@ -3,12 +3,6 @@ #include -#ifdef CONFIG_X86_32 - -#define dmi_alloc alloc_bootmem - -#else /* CONFIG_X86_32 */ - #define DMI_MAX_DATA 2048 extern int dmi_alloc_index; @@ -25,8 +19,6 @@ static inline void *dmi_alloc(unsigned len) return dmi_alloc_data + idx; } -#endif - /* Use early IO mappings for DMI because it's initialized early */ #define dmi_ioremap early_ioremap #define dmi_iounmap early_iounmap -- cgit v1.2.3 From 66a6f8d539416c9664f3a04ecb12f55a0097ab8c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 18 Jun 2008 11:54:37 -0700 Subject: x86: remove unused file after numaq etc depends on genericarch we don't need those mach_mpspec.h files now. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/mach-bigsmp/mach_mpspec.h | 8 -------- include/asm-x86/mach-es7000/mach_mpspec.h | 8 -------- include/asm-x86/mach-numaq/mach_mpspec.h | 8 -------- include/asm-x86/mach-summit/mach_mpspec.h | 9 --------- 4 files changed, 33 deletions(-) delete mode 100644 include/asm-x86/mach-bigsmp/mach_mpspec.h delete mode 100644 include/asm-x86/mach-es7000/mach_mpspec.h delete mode 100644 include/asm-x86/mach-numaq/mach_mpspec.h delete mode 100644 include/asm-x86/mach-summit/mach_mpspec.h diff --git a/include/asm-x86/mach-bigsmp/mach_mpspec.h b/include/asm-x86/mach-bigsmp/mach_mpspec.h deleted file mode 100644 index 6b5dadcf1d0e..000000000000 --- a/include/asm-x86/mach-bigsmp/mach_mpspec.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_MACH_MPSPEC_H -#define __ASM_MACH_MPSPEC_H - -#define MAX_IRQ_SOURCES 256 - -#define MAX_MP_BUSSES 32 - -#endif /* __ASM_MACH_MPSPEC_H */ diff --git a/include/asm-x86/mach-es7000/mach_mpspec.h b/include/asm-x86/mach-es7000/mach_mpspec.h deleted file mode 100644 index b1f5039d4506..000000000000 --- a/include/asm-x86/mach-es7000/mach_mpspec.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_MACH_MPSPEC_H -#define __ASM_MACH_MPSPEC_H - -#define MAX_IRQ_SOURCES 256 - -#define MAX_MP_BUSSES 256 - -#endif /* __ASM_MACH_MPSPEC_H */ diff --git a/include/asm-x86/mach-numaq/mach_mpspec.h b/include/asm-x86/mach-numaq/mach_mpspec.h deleted file mode 100644 index dffb09856f8f..000000000000 --- a/include/asm-x86/mach-numaq/mach_mpspec.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_MACH_MPSPEC_H -#define __ASM_MACH_MPSPEC_H - -#define MAX_IRQ_SOURCES 512 - -#define MAX_MP_BUSSES 32 - -#endif /* __ASM_MACH_MPSPEC_H */ diff --git a/include/asm-x86/mach-summit/mach_mpspec.h b/include/asm-x86/mach-summit/mach_mpspec.h deleted file mode 100644 index bd765523511a..000000000000 --- a/include/asm-x86/mach-summit/mach_mpspec.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_MACH_MPSPEC_H -#define __ASM_MACH_MPSPEC_H - -#define MAX_IRQ_SOURCES 256 - -/* Maximum 256 PCI busses, plus 1 ISA bus in each of 4 cabinets. */ -#define MAX_MP_BUSSES 260 - -#endif /* __ASM_MACH_MPSPEC_H */ -- cgit v1.2.3 From 95a71a45c250177854f7c530810c88a8a19a443b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 18 Jun 2008 17:27:08 -0700 Subject: x86: cleanup machine_specific_memory_setup, v2 1. let 64bit support 88 and e801 too 2. introduce default_machine_specific_memory_setup, and reuse it for voyager v2: fix 64 bit compiling Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820.c | 13 +++++++------ arch/x86/mach-voyager/setup.c | 32 +------------------------------- include/asm-x86/e820.h | 3 +-- include/asm-x86/setup.h | 3 ++- 4 files changed, 11 insertions(+), 40 deletions(-) diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 49477484a2fa..7b613d2efb04 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -1029,7 +1029,7 @@ void __init e820_reserve_resources(void) } } -char *__init __attribute__((weak)) machine_specific_memory_setup(void) +char *__init default_machine_specific_memory_setup(void) { char *who = "BIOS-e820"; int new_nr; @@ -1045,10 +1045,7 @@ char *__init __attribute__((weak)) machine_specific_memory_setup(void) &new_nr); boot_params.e820_entries = new_nr; if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) < 0) { -#ifdef CONFIG_X86_64 - early_panic("Cannot find a valid memory map"); -#else - unsigned long mem_size; + u64 mem_size; /* compare results from other methods and take the greater */ if (boot_params.alt_mem_k @@ -1063,13 +1060,17 @@ char *__init __attribute__((weak)) machine_specific_memory_setup(void) e820.nr_map = 0; e820_add_region(0, LOWMEMSIZE(), E820_RAM); e820_add_region(HIGH_MEMORY, mem_size << 10, E820_RAM); -#endif } /* In case someone cares... */ return who; } +char *__init __attribute__((weak)) machine_specific_memory_setup(void) +{ + return default_machine_specific_memory_setup(); +} + /* Overridden in paravirt.c if CONFIG_PARAVIRT */ char * __init __attribute__((weak)) memory_setup(void) { diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c index f27b583154e5..6bbdd633864c 100644 --- a/arch/x86/mach-voyager/setup.c +++ b/arch/x86/mach-voyager/setup.c @@ -104,35 +104,5 @@ char *__init machine_specific_memory_setup(void) return who; } - who = "BIOS-e820"; - - /* - * Try to copy the BIOS-supplied E820-map. - * - * Otherwise fake a memory map; one section from 0k->640k, - * the next section from 1mb->appropriate_mem_k - */ - new_nr = boot_params.e820_entries; - sanitize_e820_map(boot_params.e820_map, - ARRAY_SIZE(boot_params.e820_map), - &new_nr); - boot_params.e820_entries = new_nr; - if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries) - < 0) { - unsigned long mem_size; - - /* compare results from other methods and take the greater */ - if (boot_params.alt_mem_k < boot_params.screen_info.ext_mem_k) { - mem_size = boot_params.screen_info.ext_mem_k; - who = "BIOS-88"; - } else { - mem_size = boot_params.alt_mem_k; - who = "BIOS-e801"; - } - - e820.nr_map = 0; - e820_add_region(0, LOWMEMSIZE(), E820_RAM); - e820_add_region(HIGH_MEMORY, mem_size << 10, E820_RAM); - } - return who; + return default_machine_specific_memory_setup(); } diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 83144cb6c68d..668a0d743d25 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -102,6 +102,7 @@ extern u64 e820_hole_size(u64 start, u64 end); extern void finish_e820_parsing(void); extern void e820_reserve_resources(void); extern void setup_memory_map(void); +extern char *default_machine_specific_memory_setup(void); extern char *machine_specific_memory_setup(void); extern char *memory_setup(void); @@ -116,9 +117,7 @@ extern char *memory_setup(void); #ifdef __KERNEL__ #include -#ifdef CONFIG_X86_32 #define HIGH_MEMORY (1024*1024) -#endif #endif /* __KERNEL__ */ #endif /* __ASM_E820_H */ diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h index b676b0be7986..e14b6e73d266 100644 --- a/include/asm-x86/setup.h +++ b/include/asm-x86/setup.h @@ -42,13 +42,14 @@ void vsmp_init(void); */ extern struct boot_params boot_params; -#ifdef __i386__ /* * Do NOT EVER look at the BIOS memory size location. * It does not work on many machines. */ #define LOWMEMSIZE() (0x9f000) +#ifdef __i386__ + void __init i386_start_kernel(void); extern unsigned long init_pg_tables_start; -- cgit v1.2.3 From fcfa146e412023dd55f8855f240b2c2082dc1baa Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 18 Jun 2008 17:29:31 -0700 Subject: x86: update mptable fix with no ioapic v2 if the system doesn't have ioapic, we don't need to store entries for mptable update also let mp_config_acpi_gsi not call func in mpparse so later could decouple mpparse with acpi more easily Reported-by: Daniel Exner Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Daniel Exner Cc: Len Brown Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 87 +++++++++++++++++++++++++++++---------------- arch/x86/kernel/mpparse.c | 19 +++++----- include/asm-x86/mpspec.h | 2 -- 3 files changed, 65 insertions(+), 43 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 29b365a66cf3..91bb9a99338d 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -960,10 +960,37 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) nr_ioapics++; } +static void assign_to_mp_irq(struct mp_config_intsrc *m, + struct mp_config_intsrc *mp_irq) +{ + memcpy(mp_irq, m, sizeof(struct mp_config_intsrc)); +} + +static int mp_irq_cmp(struct mp_config_intsrc *mp_irq, + struct mp_config_intsrc *m) +{ + return memcmp(mp_irq, m, sizeof(struct mp_config_intsrc)); +} + +static void save_mp_irq(struct mp_config_intsrc *m) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + if (!mp_irq_cmp(&mp_irqs[i], m)) + return; + } + + assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]); + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); +} + void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) { int ioapic; int pin; + struct mp_config_intsrc mp_irq; /* * Convert 'gsi' to 'ioapic.pin'. @@ -981,18 +1008,15 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) if ((bus_irq == 0) && (trigger == 3)) trigger = 1; - mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; - mp_irqs[mp_irq_entries].mp_irqflag = (trigger << 2) | polarity; - mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; - mp_irqs[mp_irq_entries].mp_srcbusirq = bus_irq; /* IRQ */ - mp_irqs[mp_irq_entries].mp_dstapic = - mp_ioapics[ioapic].mp_apicid; /* APIC ID */ - mp_irqs[mp_irq_entries].mp_dstirq = pin; /* INTIN# */ - - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!!\n"); + mp_irq.mp_type = MP_INTSRC; + mp_irq.mp_irqtype = mp_INT; + mp_irq.mp_irqflag = (trigger << 2) | polarity; + mp_irq.mp_srcbus = MP_ISA_BUS; + mp_irq.mp_srcbusirq = bus_irq; /* IRQ */ + mp_irq.mp_dstapic = mp_ioapics[ioapic].mp_apicid; /* APIC ID */ + mp_irq.mp_dstirq = pin; /* INTIN# */ + save_mp_irq(&mp_irq); } void __init mp_config_acpi_legacy_irqs(void) @@ -1000,6 +1024,7 @@ void __init mp_config_acpi_legacy_irqs(void) int i; int ioapic; unsigned int dstapic; + struct mp_config_intsrc mp_irq; #if defined (CONFIG_MCA) || defined (CONFIG_EISA) /* @@ -1052,16 +1077,15 @@ void __init mp_config_acpi_legacy_irqs(void) continue; /* IRQ already used */ } - mp_irqs[mp_irq_entries].mp_type = MP_INTSRC; - mp_irqs[mp_irq_entries].mp_irqflag = 0; /* Conforming */ - mp_irqs[mp_irq_entries].mp_srcbus = MP_ISA_BUS; - mp_irqs[mp_irq_entries].mp_dstapic = dstapic; - mp_irqs[mp_irq_entries].mp_irqtype = mp_INT; - mp_irqs[mp_irq_entries].mp_srcbusirq = i; /* Identity mapped */ - mp_irqs[mp_irq_entries].mp_dstirq = i; + mp_irq.mp_type = MP_INTSRC; + mp_irq.mp_irqflag = 0; /* Conforming */ + mp_irq.mp_srcbus = MP_ISA_BUS; + mp_irq.mp_dstapic = dstapic; + mp_irq.mp_irqtype = mp_INT; + mp_irq.mp_srcbusirq = i; /* Identity mapped */ + mp_irq.mp_dstirq = i; - if (++mp_irq_entries == MAX_IRQ_SOURCES) - panic("Max # of irq sources exceeded!!\n"); + save_mp_irq(&mp_irq); } } @@ -1169,25 +1193,26 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity) int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, u32 gsi, int triggering, int polarity) { - struct mpc_config_intsrc intsrc; +#ifdef CONFIG_X86_MPPARSE + struct mp_config_intsrc mp_irq; int ioapic; - if (!enable_update_mptable) + if (!acpi_ioapic) return 0; /* print the entry should happen on mptable identically */ - intsrc.mpc_type = MP_INTSRC; - intsrc.mpc_irqtype = mp_INT; - intsrc.mpc_irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | + mp_irq.mp_type = MP_INTSRC; + mp_irq.mp_irqtype = mp_INT; + mp_irq.mp_irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); - intsrc.mpc_srcbus = number; - intsrc.mpc_srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); + mp_irq.mp_srcbus = number; + mp_irq.mp_srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); ioapic = mp_find_ioapic(gsi); - intsrc.mpc_dstapic = mp_ioapic_routing[ioapic].apic_id; - intsrc.mpc_dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base; - - MP_intsrc_info(&intsrc); + mp_irq.mp_dstapic = mp_ioapic_routing[ioapic].apic_id; + mp_irq.mp_dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base; + save_mp_irq(&mp_irq); +#endif return 0; } diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 014ac5d90f80..8b6b1e05c306 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -34,8 +34,6 @@ #include #endif -int enable_update_mptable; - /* * Checksum an MP configuration block. */ @@ -246,7 +244,7 @@ static void __init print_mp_irq_info(struct mp_config_intsrc *mp_irq) mp_irq->mp_srcbusirq, mp_irq->mp_dstapic, mp_irq->mp_dstirq); } -static void assign_to_mp_irq(struct mpc_config_intsrc *m, +static void __init assign_to_mp_irq(struct mpc_config_intsrc *m, struct mp_config_intsrc *mp_irq) { mp_irq->mp_dstapic = m->mpc_dstapic; @@ -270,7 +268,7 @@ static void __init assign_to_mpc_intsrc(struct mp_config_intsrc *mp_irq, m->mpc_dstirq = mp_irq->mp_dstirq; } -static int mp_irq_mpc_intsrc_cmp(struct mp_config_intsrc *mp_irq, +static int __init mp_irq_mpc_intsrc_cmp(struct mp_config_intsrc *mp_irq, struct mpc_config_intsrc *m) { if (mp_irq->mp_dstapic != m->mpc_dstapic) @@ -291,17 +289,16 @@ static int mp_irq_mpc_intsrc_cmp(struct mp_config_intsrc *mp_irq, return 0; } -void MP_intsrc_info(struct mpc_config_intsrc *m) +static void __init MP_intsrc_info(struct mpc_config_intsrc *m) { int i; print_MP_intsrc_info(m); - if (enable_update_mptable) - for (i = 0; i < mp_irq_entries; i++) { - if (!mp_irq_mpc_intsrc_cmp(&mp_irqs[i], m)) - return; - } + for (i = 0; i < mp_irq_entries; i++) { + if (!mp_irq_mpc_intsrc_cmp(&mp_irqs[i], m)) + return; + } assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]); if (++mp_irq_entries == MAX_IRQ_SOURCES) @@ -1113,6 +1110,8 @@ out: return 0; } +static int __initdata enable_update_mptable; + static int __init update_mptable_setup(char *str) { enable_update_mptable = 1; diff --git a/include/asm-x86/mpspec.h b/include/asm-x86/mpspec.h index f48dbca740e4..6ec1a5453b3e 100644 --- a/include/asm-x86/mpspec.h +++ b/include/asm-x86/mpspec.h @@ -59,9 +59,7 @@ extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi); extern void mp_config_acpi_legacy_irqs(void); extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low); -extern void MP_intsrc_info(struct mpc_config_intsrc *m); #ifdef CONFIG_X86_IO_APIC -extern int enable_update_mptable; extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, u32 gsi, int triggering, int polarity); #else -- cgit v1.2.3 From 6695c85b2e6f9f2e9ccaa8af38b72f5ab4a5184f Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 19 Jun 2008 12:13:09 -0700 Subject: x86: let MPS support be selectable, v2 v2: seperate "fix for compiling when MPPARSE is not set" to another patch make X86_MPPARSE to be selectable only when acpi is set and X86_MPPARSE will be set if acpi is not set. Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Maciej W. Rozycki Cc: Len Brown Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 21 +++++++++++++++++++++ arch/x86/Kconfig.debug | 9 --------- 2 files changed, 21 insertions(+), 9 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 7ebd986050a8..0804a889c27b 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -230,6 +230,27 @@ config SMP If you don't know what to do here, say N. +config X86_FIND_SMP_CONFIG + def_bool y + depends on X86_MPPARSE || X86_VOYAGER || X86_VISWS + depends on X86_32 + +if ACPI +config X86_MPPARSE + def_bool y + bool "Enable MPS table" + depends on ((X86_32 && (X86_LOCAL_APIC && !X86_VISWS)) || X86_64) + help + For old smp systems that do not have proper acpi support. Newer systems + (esp with 64bit cpus) with acpi support, MADT and DSDT will override it +endif + +if !ACPI +config X86_MPPARSE + def_bool y + depends on ((X86_32 && (X86_LOCAL_APIC && !X86_VISWS)) || X86_64) +endif + choice prompt "Subarchitecture Type" default X86_PC diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 253e7a5706d3..f7d413d6101a 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -129,15 +129,6 @@ config 4KSTACKS on the VM subsystem for higher order allocations. This option will also use IRQ stacks to compensate for the reduced stackspace. -config X86_FIND_SMP_CONFIG - def_bool y - depends on X86_MPPARSE || X86_VOYAGER || X86_VISWS - depends on X86_32 - -config X86_MPPARSE - def_bool y - depends on (X86_32 && (X86_LOCAL_APIC && !X86_VISWS)) || X86_64 - config DOUBLEFAULT default y bool "Enable doublefault exception handler" if EMBEDDED -- cgit v1.2.3 From a4caa18efe468acb3522e30763de57a67b3e438b Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 19 Jun 2008 12:15:01 -0700 Subject: x86: fix compiling when CONFIG_X86_MPPARSE is not set Signed-off-by: Yinghai Lu Cc: Andrew Morton Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 2 +- arch/x86/mm/k8topology_64.c | 4 ++++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 0804a889c27b..25251799337f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -307,7 +307,7 @@ if X86_GENERICARCH config X86_NUMAQ bool "NUMAQ (IBM/Sequent)" - depends on SMP && X86_32 + depends on SMP && X86_32 && X86_MPPARSE select NUMA help This option is used for getting Linux to run on a NUMAQ (IBM/Sequent) diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c index 1f476e477844..f75aa2ae54a3 100644 --- a/arch/x86/mm/k8topology_64.c +++ b/arch/x86/mm/k8topology_64.c @@ -56,18 +56,22 @@ static __init void early_get_boot_cpu_id(void) /* * Find possible boot-time SMP configuration: */ +#ifdef CONFIG_X86_MPPARSE early_find_smp_config(); +#endif #ifdef CONFIG_ACPI /* * Read APIC information from ACPI tables. */ early_acpi_boot_init(); #endif +#ifdef CONFIG_X86_MPPARSE /* * get boot-time SMP configuration: */ if (smp_found_config) early_get_smp_config(); +#endif early_init_lapic_mapping(); } -- cgit v1.2.3 From c73d8dd8595c4c6c1c016bb1ac4dd8035e67975b Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 8 Jul 2008 10:47:39 +0200 Subject: Revert parts of "x86: update mptable" Signed-off-by: Ingo Molnar --- drivers/acpi/pci_irq.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index e556f30c7c16..89022a74faee 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -570,11 +570,6 @@ int acpi_pci_irq_enable(struct pci_dev *dev) (triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge", (polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq); -#ifdef CONFIG_X86 - mp_config_acpi_gsi(dev->bus->number, dev->devfn, dev->pin, irq, - triggering, polarity); -#endif - return 0; } -- cgit v1.2.3 From bad48f4b313a756ccde454c25c14c828e2fd5819 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 20 Jun 2008 07:33:31 -0700 Subject: x86: simplify x86_mpparse dependency check "Maciej W. Rozycki" said: > Given X86_64 selects X86_LOCAL_APIC I am not sure the redundancy seen >above does not actually obscure the logic behind... I think: > > depends on X86_LOCAL_APIC && !X86_VISWS > >would be clearer and get the same. Suggested-by: Maciej W. Rozycki Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Len Brown Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 25251799337f..23c352e408af 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -239,7 +239,7 @@ if ACPI config X86_MPPARSE def_bool y bool "Enable MPS table" - depends on ((X86_32 && (X86_LOCAL_APIC && !X86_VISWS)) || X86_64) + depends on X86_LOCAL_APIC && !X86_VISWS help For old smp systems that do not have proper acpi support. Newer systems (esp with 64bit cpus) with acpi support, MADT and DSDT will override it @@ -248,7 +248,7 @@ endif if !ACPI config X86_MPPARSE def_bool y - depends on ((X86_32 && (X86_LOCAL_APIC && !X86_VISWS)) || X86_64) + depends on X86_LOCAL_APIC && !X86_VISWS endif choice -- cgit v1.2.3 From 471694ea6c6ccdf7131354f1d698d4d83a605293 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Tue, 1 Jul 2008 01:11:35 +0100 Subject: x86, ioapic, acpi: add a knob to disable IRQ 0 through I/O APIC As discovered recently some systems exhibit problems when the 8254 timer IRQ is routed through the I/O APIC. These problems do not affect the timer IRQ itself and therefore cannot be detected when the correctness of operation of the interrupt is verified in check_timer(). Therefore the I/O APIC path of the timer IRQ has to be disabled entirely. This is a change that lets platforms ask for the timer IRQ not to be registered in the I/O APIC interrupt tables. The local APIC and ExtINTA paths are unaffected. This request is only taken into account for ACPI platforms as MP table systems seem unaffected so far. Signed-off-by: Maciej W. Rozycki Cc: Len Brown Cc: Matthew Garrett Cc: "Rafael J. Wysocki" Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 91bb9a99338d..92a542653956 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -83,6 +83,8 @@ int acpi_lapic; int acpi_ioapic; int acpi_strict; +static int disable_irq0_through_ioapic __initdata; + u8 acpi_sci_flags __initdata; int acpi_sci_override_gsi __initdata; int acpi_skip_timer_override __initdata; @@ -992,6 +994,10 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) int pin; struct mp_config_intsrc mp_irq; + /* Skip the 8254 timer interrupt (IRQ 0) if requested. */ + if (bus_irq == 0 && disable_irq0_through_ioapic) + return; + /* * Convert 'gsi' to 'ioapic.pin'. */ @@ -1058,6 +1064,10 @@ void __init mp_config_acpi_legacy_irqs(void) for (i = 0; i < 16; i++) { int idx; + /* Skip the 8254 timer interrupt (IRQ 0) if requested. */ + if (i == 0 && disable_irq0_through_ioapic) + continue; + for (idx = 0; idx < mp_irq_entries; idx++) { struct mp_config_intsrc *irq = mp_irqs + idx; -- cgit v1.2.3 From 9340e1ccdf7b9b22a2be7f51cd74e8b5e11961bf Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 1 Jul 2008 01:12:06 +0100 Subject: x86, ioapic, acpi quirk: disable IRQ 0 through I/O APIC for some HP systems Some HP laptops have a problem with their DSDT reporting as HP/SB400/10000, which includes some code which overrides all temperature trip points to 16C if the INTIN2 input of the I/O APIC is enabled. This input is incorrectly designated the ISA IRQ 0 via an interrupt source override even though it is wired to the output of the master 8259A and INTIN0 is not connected at all. So far two models have been identified, namely nx6125 and nx6325. Use a knob provided by the I/O APIC interrupt registration code to abandon any attempts to route IRQ 0 through the I/O APIC for these systems. Signed-off-by: Maciej W. Rozycki Cc: Len Brown Cc: Matthew Garrett Cc: "Rafael J. Wysocki" Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 92a542653956..9908ef45a6b2 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1426,6 +1426,17 @@ static int __init force_acpi_ht(const struct dmi_system_id *d) return 0; } +/* + * Don't register any I/O APIC entries for the 8254 timer IRQ. + */ +static int __init +dmi_disable_irq0_through_ioapic(const struct dmi_system_id *d) +{ + pr_notice("%s detected: disabling IRQ 0 through I/O APIC\n", d->ident); + disable_irq0_through_ioapic = 1; + return 0; +} + /* * If your system is blacklisted here, but you find that acpi=force * works for you, please contact acpi-devel@sourceforge.net @@ -1593,6 +1604,32 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), }, }, + /* + * HP laptops which use a DSDT reporting as HP/SB400/10000, + * which includes some code which overrides all temperature + * trip points to 16C if the INTIN2 input of the I/O APIC + * is enabled. This input is incorrectly designated the + * ISA IRQ 0 via an interrupt source override even though + * it is wired to the output of the master 8259A and INTIN0 + * is not connected at all. Abandon any attempts to route + * IRQ 0 through the I/O APIC therefore. + */ + { + .callback = dmi_disable_irq0_through_ioapic, + .ident = "HP NX6125 laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6125"), + }, + }, + { + .callback = dmi_disable_irq0_through_ioapic, + .ident = "HP NX6325 laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"), + }, + }, {} }; -- cgit v1.2.3 From 3888e9efc9bf05e60504d2a420be7a527ff43678 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 8 Jul 2008 02:28:39 -0700 Subject: sctp: Mark the tsn as received after all allocations finish If we don't have the buffer space or memory allocations fail, the data chunk is dropped, but TSN is still reported as received. This introduced a data loss that can't be recovered. We should only mark TSNs are received after memory allocations finish. The one exception is the invalid stream identifier, but that's due to user error and is reported back to the user. This was noticed by Michael Tuexen. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/sm_statefuns.c | 9 +++------ net/sctp/ulpevent.c | 5 +++++ 2 files changed, 8 insertions(+), 6 deletions(-) diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index 0c9d5a6950fe..fcdb45d1071b 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -5899,12 +5899,6 @@ static int sctp_eat_data(const struct sctp_association *asoc, return SCTP_IERROR_NO_DATA; } - /* If definately accepting the DATA chunk, record its TSN, otherwise - * wait for renege processing. - */ - if (SCTP_CMD_CHUNK_ULP == deliver) - sctp_add_cmd_sf(commands, SCTP_CMD_REPORT_TSN, SCTP_U32(tsn)); - chunk->data_accepted = 1; /* Note: Some chunks may get overcounted (if we drop) or overcounted @@ -5924,6 +5918,9 @@ static int sctp_eat_data(const struct sctp_association *asoc, * and discard the DATA chunk. */ if (ntohs(data_hdr->stream) >= asoc->c.sinit_max_instreams) { + /* Mark tsn as received even though we drop it */ + sctp_add_cmd_sf(commands, SCTP_CMD_REPORT_TSN, SCTP_U32(tsn)); + err = sctp_make_op_error(asoc, chunk, SCTP_ERROR_INV_STRM, &data_hdr->stream, sizeof(data_hdr->stream)); diff --git a/net/sctp/ulpevent.c b/net/sctp/ulpevent.c index ce6cda6b6994..a1f654aea268 100644 --- a/net/sctp/ulpevent.c +++ b/net/sctp/ulpevent.c @@ -710,6 +710,11 @@ struct sctp_ulpevent *sctp_ulpevent_make_rcvmsg(struct sctp_association *asoc, if (!skb) goto fail; + /* Now that all memory allocations for this chunk succeeded, we + * can mark it as received so the tsn_map is updated correctly. + */ + sctp_tsnmap_mark(&asoc->peer.tsn_map, ntohl(chunk->subh.data_hdr->tsn)); + /* First calculate the padding, so we don't inadvertently * pass up the wrong length to the user. * -- cgit v1.2.3 From b755de8dfdfef97effaa91379ffafcb81f4d62a1 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 20 Feb 2008 12:41:52 -0800 Subject: x86: make dev_to_node return online node a numa system (with multi HT chains) may return node without ram. Aka it is not online. Try to get an online node, otherwise return -1. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/pci/acpi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index d95de2f199cd..ea8685f89bc3 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -172,6 +172,9 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do set_mp_bus_to_node(busnum, node); else node = get_mp_bus_to_node(busnum); + + if (node != -1 && !node_online(node)) + node = -1; #endif /* Allocate per-root-bus (not per bus) arch-specific data. -- cgit v1.2.3 From dbb6152e6f72df367f8a955586c5e6282a7255e5 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 19 Apr 2008 01:30:16 -0700 Subject: x86: don't call pxm_to_node again also make bus_numa work even if ACPI_NUMA is not defined. don't call pxm_to_node again, and use node directly. Signed-off-by: Yinghai Lu Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/pci/acpi.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index ea8685f89bc3..28d17a5cfb8d 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -171,11 +171,11 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do if (node != -1) set_mp_bus_to_node(busnum, node); else +#endif node = get_mp_bus_to_node(busnum); if (node != -1 && !node_online(node)) node = -1; -#endif /* Allocate per-root-bus (not per bus) arch-specific data. * TODO: leak; this memory is never freed. @@ -207,14 +207,16 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do if (!bus) kfree(sd); + if (bus && node != -1) { #ifdef CONFIG_ACPI_NUMA - if (bus) { - if (pxm >= 0) { + if (pxm >= 0) printk(KERN_DEBUG "bus %02x -> pxm %d -> node %d\n", - busnum, pxm, pxm_to_node(pxm)); - } - } + busnum, pxm, node); +#else + printk(KERN_DEBUG "bus %02x -> node %d\n", + busnum, node); #endif + } if (bus && (pci_probe & PCI_USE__CRS)) get_current_resources(device, busnum, domain, bus); -- cgit v1.2.3 From 7496b60654e759d0b9008b80908e80727904b3c4 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Mon, 12 May 2008 21:21:12 +0200 Subject: x86: fix remove cpu_pda table patch Mike Travis wrote: > Ingo Molnar wrote: >> * Mike Travis wrote: >> >>> [Ingo - please replace "PATCH 07/11" with this one.] >>> >>> * Remove 544k bytes from the kernel by removing the boot_cpu_pda >>> array from the data section and allocating it during startup. >>> >>> Fixed panic in setup_per_cpu_areas when HOTPLUG_CPU not set. >>> >>> For inclusion into sched-devel/latest tree. >> sched-devel.git randconfig testing found another crash with your queue: >> >> [ 0.111060] Brought up 1 CPUs >> [ 0.111986] Total of 1 processors activated (4022.73 BogoMIPS). >> [ 0.112987] Testing NMI watchdog ... <1>BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 >> [ 0.114982] IP: [] check_nmi_watchdog+0xb0/0x210 >> [ 0.114982] PGD 0 >> [ 0.114982] Oops: 0000 [1] SMP >> [ 0.114982] CPU 0 >> [............] >> >> http://redhat.com/~mingo/misc/config-Mon_Apr_28_23_25_25_CEST_2008.bad >> http://redhat.com/~mingo/misc/log-Mon_Apr_28_23_25_25_CEST_2008.bad >> >> Ingo > > Hi Ingo, > > I need a bit more information on your hardware configuration. Building a > kernel with the above config file started up fine on both the Intel and AMD > boxes. > > Based on the above output it looks like it might be a UP machine? ... Ok, I think I found it. In check_nmi_watchdog(): for (cpu = 0; cpu < NR_CPUS; cpu++) prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count; As I mentioned it works fine on both of my systems so could you try it out? Thanks! Mike -- * Change function check_nmi_watchdog() to use nr_cpu_ids instead of NR_CPUS. Based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + sched-devel/latest .../mingo/linux-2.6-sched-devel.git Signed-off-by: Mike Travis Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/nmi_64.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c index 5a29ded994fa..2861b9408ac9 100644 --- a/arch/x86/kernel/nmi_64.c +++ b/arch/x86/kernel/nmi_64.c @@ -88,7 +88,7 @@ int __init check_nmi_watchdog(void) if (!atomic_read(&nmi_active)) return 0; - prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); + prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(int), GFP_KERNEL); if (!prev_nmi_count) return -1; @@ -99,7 +99,7 @@ int __init check_nmi_watchdog(void) smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0); #endif - for (cpu = 0; cpu < NR_CPUS; cpu++) + for (cpu = 0; cpu < nr_cpu_ids; cpu++) prev_nmi_count[cpu] = cpu_pda(cpu)->__nmi_count; local_irq_enable(); mdelay((20*1000)/nmi_hz); // wait 20 ticks -- cgit v1.2.3 From 1184dc2ffe2c8fb9afb766d870850f2c3165ef25 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Mon, 12 May 2008 21:21:12 +0200 Subject: x86: modify Kconfig to allow up to 4096 cpus * Increase the limit of NR_CPUS to 4096 and introduce a boolean called "MAXSMP" which when set (e.g. "allyesconfig"), will set NR_CPUS = 4096 and NODES_SHIFT = 9 (512). * Changed max setting for NODES_SHIFT from 15 to 9 to accurately reflect the real limit. Signed-off-by: Mike Travis Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 37 ++++++++++++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 5 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index bf07b6f50fa1..2e325521e5e9 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -561,20 +561,35 @@ config SWIOTLB config IOMMU_HELPER def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB) +config MAXSMP + bool "Configure Maximum number of SMP Processors and NUMA Nodes" + depends on X86_64 && SMP + default n + help + Configure maximum number of CPUS and NUMA Nodes for this architecture. + If unsure, say N. +if MAXSMP config NR_CPUS - int "Maximum number of CPUs (2-255)" - range 2 255 + int + default "4096" +endif + +if !MAXSMP +config NR_CPUS + int "Maximum number of CPUs (2-4096)" + range 2 4096 depends on SMP default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000 default "8" help This allows you to specify the maximum number of CPUs which this - kernel will support. The maximum supported value is 255 and the + kernel will support. The maximum supported value is 4096 and the minimum value which makes sense is 2. This is purely to save memory - each supported CPU adds approximately eight kilobytes to the kernel image. +endif config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" @@ -965,13 +980,25 @@ config NUMA_EMU into virtual nodes when booted with "numa=fake=N", where N is the number of nodes. This is only useful for debugging. +if MAXSMP + +config NODES_SHIFT + int + default "9" +endif + +if !MAXSMP config NODES_SHIFT - int "Max num nodes shift(1-9)" - range 1 9 if X86_64 + int "Maximum NUMA Nodes (as a power of 2)" + range 1 9 if X86_64 default "6" if X86_64 default "4" if X86_NUMAQ default "3" depends on NEED_MULTIPLE_NODES + help + Specify the maximum number of NUMA Nodes available on the target + system. Increases memory reserved to accomodate various tables. +endif config HAVE_ARCH_BOOTMEM_NODE def_bool y -- cgit v1.2.3 From 138c9021ca68d6f8a6fac3418995fee102a3cc22 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Tue, 8 Jul 2008 11:31:06 +0200 Subject: [S390] protect _PAGE_SPECIAL bit against mprotect Stop mprotect's pte_modify from wiping out the s390 pte_special bit, which caused oops thereafter when vm_normal_page thought X's abnormal was normal. Debugged-by: Ryan Hope Debugged-by: Zan Lynx Acked-by: Hugh Dickins Signed-off-by: Nick Piggin Signed-off-by: Martin Schwidefsky --- include/asm-s390/pgtable.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/include/asm-s390/pgtable.h b/include/asm-s390/pgtable.h index c7f4f8e3e297..bd0ea191dfa9 100644 --- a/include/asm-s390/pgtable.h +++ b/include/asm-s390/pgtable.h @@ -223,6 +223,9 @@ extern char empty_zero_page[PAGE_SIZE]; #define _PAGE_SPECIAL 0x004 /* SW associated with special page */ #define __HAVE_ARCH_PTE_SPECIAL +/* Set of bits not changed in pte_modify */ +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_SPECIAL) + /* Six different types of pages. */ #define _PAGE_TYPE_EMPTY 0x400 #define _PAGE_TYPE_NONE 0x401 @@ -681,7 +684,7 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *pt */ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { - pte_val(pte) &= PAGE_MASK; + pte_val(pte) &= _PAGE_CHG_MASK; pte_val(pte) |= pgprot_val(newprot); return pte; } -- cgit v1.2.3 From 23ca4bba3e20c6c3cb11c1bb0ab4770b724d39ac Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Mon, 12 May 2008 21:21:12 +0200 Subject: x86: cleanup early per cpu variables/accesses v4 * Introduce a new PER_CPU macro called "EARLY_PER_CPU". This is used by some per_cpu variables that are initialized and accessed before there are per_cpu areas allocated. ["Early" in respect to per_cpu variables is "earlier than the per_cpu areas have been setup".] This patchset adds these new macros: DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) EXPORT_EARLY_PER_CPU_SYMBOL(_name) DECLARE_EARLY_PER_CPU(_type, _name) early_per_cpu_ptr(_name) early_per_cpu_map(_name, _idx) early_per_cpu(_name, _cpu) The DEFINE macro defines the per_cpu variable as well as the early map and pointer. It also initializes the per_cpu variable and map elements to "_initvalue". The early_* macros provide access to the initial map (usually setup during system init) and the early pointer. This pointer is initialized to point to the early map but is then NULL'ed when the actual per_cpu areas are setup. After that the per_cpu variable is the correct access to the variable. The early_per_cpu() macro is not very efficient but does show how to access the variable if you have a function that can be called both "early" and "late". It tests the early ptr to be NULL, and if not then it's still valid. Otherwise, the per_cpu variable is used instead: #define early_per_cpu(_name, _cpu) \ (early_per_cpu_ptr(_name) ? \ early_per_cpu_ptr(_name)[_cpu] : \ per_cpu(_name, _cpu)) A better method is to actually check the pointer manually. In the case below, numa_set_node can be called both "early" and "late": void __cpuinit numa_set_node(int cpu, int node) { int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map); if (cpu_to_node_map) cpu_to_node_map[cpu] = node; else per_cpu(x86_cpu_to_node_map, cpu) = node; } * Add a flag "arch_provides_topology_pointers" that indicates pointers to topology cpumask_t maps are available. Otherwise, use the function returning the cpumask_t value. This is useful if cpumask_t set size is very large to avoid copying data on to/off of the stack. * The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while the non-debug case has been optimized a bit. * Remove an unreferenced compiler warning in drivers/base/topology.c * Clean up #ifdef in setup.c For inclusion into sched-devel/latest tree. Based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + sched-devel/latest .../mingo/linux-2.6-sched-devel.git Signed-off-by: Mike Travis Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 2 +- arch/x86/Kconfig.debug | 2 +- arch/x86/kernel/apic_32.c | 9 +-- arch/x86/kernel/apic_64.c | 11 ++-- arch/x86/kernel/setup.c | 96 ++++++++++++++++++++++++++---- arch/x86/kernel/setup_32.c | 24 -------- arch/x86/kernel/setup_64.c | 9 --- arch/x86/kernel/smpboot.c | 20 +------ arch/x86/mm/numa_64.c | 43 ++++---------- arch/x86/mm/srat_64.c | 2 +- drivers/base/topology.c | 25 +++++++- include/asm-x86/numa_64.h | 19 +++--- include/asm-x86/percpu.h | 46 +++++++++++++++ include/asm-x86/smp.h | 15 +---- include/asm-x86/topology.h | 143 ++++++++++++++++++++++++++------------------- 15 files changed, 270 insertions(+), 196 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 2e325521e5e9..4469a0db1ae1 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -121,7 +121,7 @@ config ARCH_HAS_CACHE_LINE_SIZE def_bool y config HAVE_SETUP_PER_CPU_AREA - def_bool X86_64 || (X86_SMP && !X86_VOYAGER) + def_bool X86_64_SMP || (X86_SMP && !X86_VOYAGER) config HAVE_CPUMASK_OF_CPU_MAP def_bool X86_64_SMP diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 18363374d51a..24ca95a0ba54 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -60,7 +60,7 @@ config DEBUG_PAGEALLOC config DEBUG_PER_CPU_MAPS bool "Debug access to per_cpu maps" depends on DEBUG_KERNEL - depends on X86_64_SMP + depends on X86_SMP default n help Say Y to verify that the per_cpu map being accessed has diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 4b99b1bdeb6c..f17c1c1bc384 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -52,9 +52,6 @@ unsigned long mp_lapic_addr; -DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID; -EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid); - /* * Knob to control our willingness to enable the local APIC. * @@ -1534,9 +1531,9 @@ void __cpuinit generic_processor_info(int apicid, int version) } #ifdef CONFIG_SMP /* are we being called early in kernel startup? */ - if (x86_cpu_to_apicid_early_ptr) { - u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr; - u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; + if (early_per_cpu_ptr(x86_cpu_to_apicid)) { + u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); + u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid); cpu_to_apicid[cpu] = apicid; bios_cpu_apicid[cpu] = apicid; diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 0633cfd0dc29..4fd21f7d698c 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -87,9 +87,6 @@ static unsigned long apic_phys; unsigned long mp_lapic_addr; -DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID; -EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid); - unsigned int __cpuinitdata maxcpus = NR_CPUS; /* * Get the LAPIC version @@ -1091,9 +1088,9 @@ void __cpuinit generic_processor_info(int apicid, int version) cpu = 0; } /* are we being called early in kernel startup? */ - if (x86_cpu_to_apicid_early_ptr) { - u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr; - u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; + if (early_per_cpu_ptr(x86_cpu_to_apicid)) { + u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); + u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid); cpu_to_apicid[cpu] = apicid; bios_cpu_apicid[cpu] = apicid; @@ -1269,7 +1266,7 @@ __cpuinit int apic_is_clustered_box(void) if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box()) return 0; - bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr; + bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid); bitmap_zero(clustermap, NUM_APIC_CLUSTERS); for (i = 0; i < NR_CPUS; i++) { diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 6f80b852a196..03caa8e4351f 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -19,13 +19,23 @@ unsigned disabled_cpus __cpuinitdata; unsigned int boot_cpu_physical_apicid = -1U; EXPORT_SYMBOL(boot_cpu_physical_apicid); -DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID; -EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid); - /* Bitmask of physically existing CPUs */ physid_mask_t phys_cpu_present_map; #endif +/* map cpu index to physical APIC ID */ +DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID); +DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID); +EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid); +EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid); + +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) +#define X86_64_NUMA 1 + +DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE); +EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map); +#endif + #if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP) /* * Copy data used in early init routines from the initial arrays to the @@ -37,20 +47,21 @@ static void __init setup_per_cpu_maps(void) int cpu; for_each_possible_cpu(cpu) { - per_cpu(x86_cpu_to_apicid, cpu) = x86_cpu_to_apicid_init[cpu]; + per_cpu(x86_cpu_to_apicid, cpu) = + early_per_cpu_map(x86_cpu_to_apicid, cpu); per_cpu(x86_bios_cpu_apicid, cpu) = - x86_bios_cpu_apicid_init[cpu]; -#ifdef CONFIG_NUMA + early_per_cpu_map(x86_bios_cpu_apicid, cpu); +#ifdef X86_64_NUMA per_cpu(x86_cpu_to_node_map, cpu) = - x86_cpu_to_node_map_init[cpu]; + early_per_cpu_map(x86_cpu_to_node_map, cpu); #endif } /* indicate the early static arrays will soon be gone */ - x86_cpu_to_apicid_early_ptr = NULL; - x86_bios_cpu_apicid_early_ptr = NULL; -#ifdef CONFIG_NUMA - x86_cpu_to_node_map_early_ptr = NULL; + early_per_cpu_ptr(x86_cpu_to_apicid) = NULL; + early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL; +#ifdef X86_64_NUMA + early_per_cpu_ptr(x86_cpu_to_node_map) = NULL; #endif } @@ -109,7 +120,8 @@ void __init setup_per_cpu_areas(void) if (!node_online(node) || !NODE_DATA(node)) { ptr = alloc_bootmem_pages(size); printk(KERN_INFO - "cpu %d has no node or node-local memory\n", i); + "cpu %d has no node %d or node-local memory\n", + i, node); } else ptr = alloc_bootmem_pages_node(NODE_DATA(node), size); @@ -137,3 +149,63 @@ void __init setup_per_cpu_areas(void) } #endif + +#ifdef X86_64_NUMA +void __cpuinit numa_set_node(int cpu, int node) +{ + int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map); + + if (cpu_to_node_map) + cpu_to_node_map[cpu] = node; + + else if (per_cpu_offset(cpu)) + per_cpu(x86_cpu_to_node_map, cpu) = node; + + else + Dprintk(KERN_INFO "Setting node for non-present cpu %d\n", cpu); +} + +void __cpuinit numa_clear_node(int cpu) +{ + numa_set_node(cpu, NUMA_NO_NODE); +} + +void __cpuinit numa_add_cpu(int cpu) +{ + cpu_set(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]); +} + +void __cpuinit numa_remove_cpu(int cpu) +{ + cpu_clear(cpu, node_to_cpumask_map[cpu_to_node(cpu)]); +} +#endif /* CONFIG_NUMA */ + +#if defined(CONFIG_DEBUG_PER_CPU_MAPS) && defined(CONFIG_X86_64) + +int cpu_to_node(int cpu) +{ + if (early_per_cpu_ptr(x86_cpu_to_node_map)) { + printk(KERN_WARNING + "cpu_to_node(%d): usage too early!\n", cpu); + dump_stack(); + return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; + } + return per_cpu(x86_cpu_to_node_map, cpu); +} +EXPORT_SYMBOL(cpu_to_node); + +int early_cpu_to_node(int cpu) +{ + if (early_per_cpu_ptr(x86_cpu_to_node_map)) + return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; + + if (!per_cpu_offset(cpu)) { + printk(KERN_WARNING + "early_cpu_to_node(%d): no per_cpu area!\n", cpu); + dump_stack(); + return NUMA_NO_NODE; + } + return per_cpu(x86_cpu_to_node_map, cpu); +} +#endif diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 5a2f8e063887..ccd5f5cdbbe6 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -737,18 +737,6 @@ char * __init __attribute__((weak)) memory_setup(void) return machine_specific_memory_setup(); } -#ifdef CONFIG_NUMA -/* - * In the golden day, when everything among i386 and x86_64 will be - * integrated, this will not live here - */ -void *x86_cpu_to_node_map_early_ptr; -int x86_cpu_to_node_map_init[NR_CPUS] = { - [0 ... NR_CPUS-1] = NUMA_NO_NODE -}; -DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE; -#endif - /* * Determine if we were loaded by an EFI loader. If so, then we have also been * passed the efi memmap, systab, etc., so we should use these data structures @@ -887,18 +875,6 @@ void __init setup_arch(char **cmdline_p) io_delay_init(); -#ifdef CONFIG_X86_SMP - /* - * setup to use the early static init tables during kernel startup - * X86_SMP will exclude sub-arches that don't deal well with it. - */ - x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init; - x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init; -#ifdef CONFIG_NUMA - x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init; -#endif -#endif - #ifdef CONFIG_X86_GENERICARCH generic_apic_probe(); #endif diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 6dff1286ad8a..e8df64fad540 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -406,15 +406,6 @@ void __init setup_arch(char **cmdline_p) kvmclock_init(); #endif -#ifdef CONFIG_SMP - /* setup to use the early static init tables during kernel startup */ - x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init; - x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init; -#ifdef CONFIG_NUMA - x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init; -#endif -#endif - #ifdef CONFIG_ACPI /* * Initialize the ACPI boot-time table parser (gets the RSDP and SDT). diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 3e1cecedde42..036604d3daed 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -68,22 +68,6 @@ #include #include -/* - * FIXME: For x86_64, those are defined in other files. But moving them here, - * would make the setup areas dependent on smp, which is a loss. When we - * integrate apic between arches, we can probably do a better job, but - * right now, they'll stay here -- glommer - */ - -/* which logical CPU number maps to which CPU (physical APIC ID) */ -u16 x86_cpu_to_apicid_init[NR_CPUS] __initdata = - { [0 ... NR_CPUS-1] = BAD_APICID }; -void *x86_cpu_to_apicid_early_ptr; - -u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata - = { [0 ... NR_CPUS-1] = BAD_APICID }; -void *x86_bios_cpu_apicid_early_ptr; - #ifdef CONFIG_X86_32 u8 apicid_2_node[MAX_APICID]; static int low_mappings; @@ -992,7 +976,7 @@ do_rest: /* Try to put things back the way they were before ... */ unmap_cpu_to_logical_apicid(cpu); #ifdef CONFIG_X86_64 - clear_node_cpumask(cpu); /* was set by numa_add_cpu */ + numa_remove_cpu(cpu); /* was set by numa_add_cpu */ #endif cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */ cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */ @@ -1373,7 +1357,7 @@ static void __ref remove_cpu_from_maps(int cpu) cpu_clear(cpu, cpu_callin_map); /* was set by cpu_init() */ clear_bit(cpu, (unsigned long *)&cpu_initialized); - clear_node_cpumask(cpu); + numa_remove_cpu(cpu); #endif } diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index c5066d519e5d..970f86775c41 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -31,16 +31,6 @@ bootmem_data_t plat_node_bdata[MAX_NUMNODES]; struct memnode memnode; -#ifdef CONFIG_SMP -int x86_cpu_to_node_map_init[NR_CPUS] = { - [0 ... NR_CPUS-1] = NUMA_NO_NODE -}; -void *x86_cpu_to_node_map_early_ptr; -EXPORT_SYMBOL(x86_cpu_to_node_map_early_ptr); -#endif -DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE; -EXPORT_PER_CPU_SYMBOL(x86_cpu_to_node_map); - s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = { [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE }; @@ -577,24 +567,6 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn) setup_node_bootmem(0, start_pfn << PAGE_SHIFT, end_pfn << PAGE_SHIFT); } -__cpuinit void numa_add_cpu(int cpu) -{ - set_bit(cpu, - (unsigned long *)&node_to_cpumask_map[early_cpu_to_node(cpu)]); -} - -void __cpuinit numa_set_node(int cpu, int node) -{ - int *cpu_to_node_map = x86_cpu_to_node_map_early_ptr; - - if(cpu_to_node_map) - cpu_to_node_map[cpu] = node; - else if(per_cpu_offset(cpu)) - per_cpu(x86_cpu_to_node_map, cpu) = node; - else - Dprintk(KERN_INFO "Setting node for non-present cpu %d\n", cpu); -} - unsigned long __init numa_free_all_bootmem(void) { unsigned long pages = 0; @@ -641,6 +613,7 @@ static __init int numa_setup(char *opt) } early_param("numa", numa_setup); +#ifdef CONFIG_NUMA /* * Setup early cpu_to_node. * @@ -652,14 +625,19 @@ early_param("numa", numa_setup); * is already initialized in a round robin manner at numa_init_array, * prior to this call, and this initialization is good enough * for the fake NUMA cases. + * + * Called before the per_cpu areas are setup. */ void __init init_cpu_to_node(void) { - int i; + int cpu; + u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); - for (i = 0; i < NR_CPUS; i++) { + BUG_ON(cpu_to_apicid == NULL); + + for_each_possible_cpu(cpu) { int node; - u16 apicid = x86_cpu_to_apicid_init[i]; + u16 apicid = cpu_to_apicid[cpu]; if (apicid == BAD_APICID) continue; @@ -668,8 +646,9 @@ void __init init_cpu_to_node(void) continue; if (!node_online(node)) continue; - numa_set_node(i, node); + numa_set_node(cpu, node); } } +#endif diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 99649dccad28..012220e31c99 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -376,7 +376,7 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) if (node == NUMA_NO_NODE) continue; if (!node_isset(node, node_possible_map)) - numa_set_node(i, NUMA_NO_NODE); + numa_clear_node(i); } numa_init_array(); return 0; diff --git a/drivers/base/topology.c b/drivers/base/topology.c index fdf4044d2e74..1efe162e16d7 100644 --- a/drivers/base/topology.c +++ b/drivers/base/topology.c @@ -40,6 +40,7 @@ static ssize_t show_##name(struct sys_device *dev, char *buf) \ return sprintf(buf, "%d\n", topology_##name(cpu)); \ } +#if defined(topology_thread_siblings) || defined(topology_core_siblings) static ssize_t show_cpumap(int type, cpumask_t *mask, char *buf) { ptrdiff_t len = PTR_ALIGN(buf + PAGE_SIZE - 1, PAGE_SIZE) - buf; @@ -54,21 +55,41 @@ static ssize_t show_cpumap(int type, cpumask_t *mask, char *buf) } return n; } +#endif +#ifdef arch_provides_topology_pointers #define define_siblings_show_map(name) \ -static inline ssize_t show_##name(struct sys_device *dev, char *buf) \ +static ssize_t show_##name(struct sys_device *dev, char *buf) \ { \ unsigned int cpu = dev->id; \ return show_cpumap(0, &(topology_##name(cpu)), buf); \ } #define define_siblings_show_list(name) \ -static inline ssize_t show_##name##_list(struct sys_device *dev, char *buf) \ +static ssize_t show_##name##_list(struct sys_device *dev, char *buf) \ { \ unsigned int cpu = dev->id; \ return show_cpumap(1, &(topology_##name(cpu)), buf); \ } +#else +#define define_siblings_show_map(name) \ +static ssize_t show_##name(struct sys_device *dev, char *buf) \ +{ \ + unsigned int cpu = dev->id; \ + cpumask_t mask = topology_##name(cpu); \ + return show_cpumap(0, &mask, buf); \ +} + +#define define_siblings_show_list(name) \ +static ssize_t show_##name##_list(struct sys_device *dev, char *buf) \ +{ \ + unsigned int cpu = dev->id; \ + cpumask_t mask = topology_##name(cpu); \ + return show_cpumap(1, &mask, buf); \ +} +#endif + #define define_siblings_show_func(name) \ define_siblings_show_map(name); define_siblings_show_list(name) diff --git a/include/asm-x86/numa_64.h b/include/asm-x86/numa_64.h index 22e87c9f6a80..b510daf4f4d8 100644 --- a/include/asm-x86/numa_64.h +++ b/include/asm-x86/numa_64.h @@ -14,11 +14,9 @@ extern int compute_hash_shift(struct bootnode *nodes, int numblks, #define ZONE_ALIGN (1UL << (MAX_ORDER+PAGE_SHIFT)) -extern void numa_add_cpu(int cpu); extern void numa_init_array(void); extern int numa_off; -extern void numa_set_node(int cpu, int node); extern void srat_reserve_add_area(int nodeid); extern int hotadd_percent; @@ -31,15 +29,16 @@ extern void setup_node_bootmem(int nodeid, unsigned long start, #ifdef CONFIG_NUMA extern void __init init_cpu_to_node(void); - -static inline void clear_node_cpumask(int cpu) -{ - clear_bit(cpu, (unsigned long *)&node_to_cpumask_map[cpu_to_node(cpu)]); -} - +extern void __cpuinit numa_set_node(int cpu, int node); +extern void __cpuinit numa_clear_node(int cpu); +extern void __cpuinit numa_add_cpu(int cpu); +extern void __cpuinit numa_remove_cpu(int cpu); #else -#define init_cpu_to_node() do {} while (0) -#define clear_node_cpumask(cpu) do {} while (0) +static inline void init_cpu_to_node(void) { } +static inline void numa_set_node(int cpu, int node) { } +static inline void numa_clear_node(int cpu) { } +static inline void numa_add_cpu(int cpu, int node) { } +static inline void numa_remove_cpu(int cpu) { } #endif #endif diff --git a/include/asm-x86/percpu.h b/include/asm-x86/percpu.h index 736fc3bb8e1e..912a3a17b9db 100644 --- a/include/asm-x86/percpu.h +++ b/include/asm-x86/percpu.h @@ -143,4 +143,50 @@ do { \ #define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val) #endif /* !__ASSEMBLY__ */ #endif /* !CONFIG_X86_64 */ + +#ifdef CONFIG_SMP + +/* + * Define the "EARLY_PER_CPU" macros. These are used for some per_cpu + * variables that are initialized and accessed before there are per_cpu + * areas allocated. + */ + +#define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \ + DEFINE_PER_CPU(_type, _name) = _initvalue; \ + __typeof__(_type) _name##_early_map[NR_CPUS] __initdata = \ + { [0 ... NR_CPUS-1] = _initvalue }; \ + __typeof__(_type) *_name##_early_ptr = _name##_early_map + +#define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \ + EXPORT_PER_CPU_SYMBOL(_name) + +#define DECLARE_EARLY_PER_CPU(_type, _name) \ + DECLARE_PER_CPU(_type, _name); \ + extern __typeof__(_type) *_name##_early_ptr; \ + extern __typeof__(_type) _name##_early_map[] + +#define early_per_cpu_ptr(_name) (_name##_early_ptr) +#define early_per_cpu_map(_name, _idx) (_name##_early_map[_idx]) +#define early_per_cpu(_name, _cpu) \ + (early_per_cpu_ptr(_name) ? \ + early_per_cpu_ptr(_name)[_cpu] : \ + per_cpu(_name, _cpu)) + +#else /* !CONFIG_SMP */ +#define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \ + DEFINE_PER_CPU(_type, _name) = _initvalue + +#define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \ + EXPORT_PER_CPU_SYMBOL(_name) + +#define DECLARE_EARLY_PER_CPU(_type, _name) \ + DECLARE_PER_CPU(_type, _name) + +#define early_per_cpu(_name, _cpu) per_cpu(_name, _cpu) +#define early_per_cpu_ptr(_name) NULL +/* no early_per_cpu_map() */ + +#endif /* !CONFIG_SMP */ + #endif /* _ASM_X86_PERCPU_H_ */ diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h index 1ebaa5cd3112..ec841639fb44 100644 --- a/include/asm-x86/smp.h +++ b/include/asm-x86/smp.h @@ -29,21 +29,12 @@ extern int smp_num_siblings; extern unsigned int num_processors; extern cpumask_t cpu_initialized; -#ifdef CONFIG_SMP -extern u16 x86_cpu_to_apicid_init[]; -extern u16 x86_bios_cpu_apicid_init[]; -extern void *x86_cpu_to_apicid_early_ptr; -extern void *x86_bios_cpu_apicid_early_ptr; -#else -#define x86_cpu_to_apicid_early_ptr NULL -#define x86_bios_cpu_apicid_early_ptr NULL -#endif - DECLARE_PER_CPU(cpumask_t, cpu_sibling_map); DECLARE_PER_CPU(cpumask_t, cpu_core_map); DECLARE_PER_CPU(u16, cpu_llc_id); -DECLARE_PER_CPU(u16, x86_cpu_to_apicid); -DECLARE_PER_CPU(u16, x86_bios_cpu_apicid); + +DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid); +DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid); /* Static state in head.S used to set up a CPU */ extern struct { diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h index dcf3f8131d6b..dac09cb66dca 100644 --- a/include/asm-x86/topology.h +++ b/include/asm-x86/topology.h @@ -35,87 +35,67 @@ # endif #endif +/* Node not present */ +#define NUMA_NO_NODE (-1) + #ifdef CONFIG_NUMA #include #include -/* Mappings between logical cpu number and node number */ #ifdef CONFIG_X86_32 -extern int cpu_to_node_map[]; -#else -/* Returns the number of the current Node. */ -#define numa_node_id() (early_cpu_to_node(raw_smp_processor_id())) -#endif - -DECLARE_PER_CPU(int, x86_cpu_to_node_map); - -#ifdef CONFIG_SMP -extern int x86_cpu_to_node_map_init[]; -extern void *x86_cpu_to_node_map_early_ptr; -#else -#define x86_cpu_to_node_map_early_ptr NULL -#endif +/* Mappings between node number and cpus on that node. */ extern cpumask_t node_to_cpumask_map[]; -#define NUMA_NO_NODE (-1) +/* Mappings between logical cpu number and node number */ +extern int cpu_to_node_map[]; /* Returns the number of the node containing CPU 'cpu' */ -#ifdef CONFIG_X86_32 -#define early_cpu_to_node(cpu) cpu_to_node(cpu) static inline int cpu_to_node(int cpu) { return cpu_to_node_map[cpu]; } +#define early_cpu_to_node(cpu) cpu_to_node(cpu) #else /* CONFIG_X86_64 */ -#ifdef CONFIG_SMP -static inline int early_cpu_to_node(int cpu) -{ - int *cpu_to_node_map = x86_cpu_to_node_map_early_ptr; - - if (cpu_to_node_map) - return cpu_to_node_map[cpu]; - else if (per_cpu_offset(cpu)) - return per_cpu(x86_cpu_to_node_map, cpu); - else - return NUMA_NO_NODE; -} -#else -#define early_cpu_to_node(cpu) cpu_to_node(cpu) -#endif +/* Mappings between node number and cpus on that node. */ +extern cpumask_t node_to_cpumask_map[]; + +/* Mappings between logical cpu number and node number */ +DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map); + +/* Returns the number of the current Node. */ +#define numa_node_id() (per_cpu(x86_cpu_to_node_map, raw_smp_processor_id())) + +#ifdef CONFIG_DEBUG_PER_CPU_MAPS +extern int cpu_to_node(int cpu); +extern int early_cpu_to_node(int cpu); +extern cpumask_t *_node_to_cpumask_ptr(int node); +extern cpumask_t node_to_cpumask(int node); +#else /* !CONFIG_DEBUG_PER_CPU_MAPS */ + +/* Returns the number of the node containing CPU 'cpu' */ static inline int cpu_to_node(int cpu) { -#ifdef CONFIG_DEBUG_PER_CPU_MAPS - if (x86_cpu_to_node_map_early_ptr) { - printk("KERN_NOTICE cpu_to_node(%d): usage too early!\n", - (int)cpu); - dump_stack(); - return ((int *)x86_cpu_to_node_map_early_ptr)[cpu]; - } -#endif return per_cpu(x86_cpu_to_node_map, cpu); } -#ifdef CONFIG_NUMA - -/* Returns a pointer to the cpumask of CPUs on Node 'node'. */ -#define node_to_cpumask_ptr(v, node) \ - cpumask_t *v = &(node_to_cpumask_map[node]) - -#define node_to_cpumask_ptr_next(v, node) \ - v = &(node_to_cpumask_map[node]) -#endif +/* Same function but used if called before per_cpu areas are setup */ +static inline int early_cpu_to_node(int cpu) +{ + if (early_per_cpu_ptr(x86_cpu_to_node_map)) + return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; -#endif /* CONFIG_X86_64 */ + return per_cpu(x86_cpu_to_node_map, cpu); +} -/* - * Returns the number of the node containing Node 'node'. This - * architecture is flat, so it is a pretty simple function! - */ -#define parent_node(node) (node) +/* Returns a pointer to the cpumask of CPUs on Node 'node'. */ +static inline cpumask_t *_node_to_cpumask_ptr(int node) +{ + return &node_to_cpumask_map[node]; +} /* Returns a bitmask of CPUs on Node 'node'. */ static inline cpumask_t node_to_cpumask(int node) @@ -123,14 +103,29 @@ static inline cpumask_t node_to_cpumask(int node) return node_to_cpumask_map[node]; } +#endif /* !CONFIG_DEBUG_PER_CPU_MAPS */ +#endif /* CONFIG_X86_64 */ + +/* Replace default node_to_cpumask_ptr with optimized version */ +#define node_to_cpumask_ptr(v, node) \ + cpumask_t *v = _node_to_cpumask_ptr(node) + +#define node_to_cpumask_ptr_next(v, node) \ + v = _node_to_cpumask_ptr(node) + /* Returns the number of the first CPU on Node 'node'. */ static inline int node_to_first_cpu(int node) { - cpumask_t mask = node_to_cpumask(node); - - return first_cpu(mask); + node_to_cpumask_ptr(mask, node); + return first_cpu(*mask); } +/* + * Returns the number of the node containing Node 'node'. This + * architecture is flat, so it is a pretty simple function! + */ +#define parent_node(node) (node) + #define pcibus_to_node(bus) __pcibus_to_node(bus) #define pcibus_to_cpumask(bus) __pcibus_to_cpumask(bus) @@ -180,8 +175,31 @@ extern int __node_distance(int, int); #define node_distance(a, b) __node_distance(a, b) #endif -#else /* CONFIG_NUMA */ +#else /* !CONFIG_NUMA */ + +#define numa_node_id() 0 +#define cpu_to_node(cpu) 0 +#define early_cpu_to_node(cpu) 0 + +static inline cpumask_t *_node_to_cpumask_ptr(int node) +{ + return &cpu_online_map; +} +static inline cpumask_t node_to_cpumask(int node) +{ + return cpu_online_map; +} +static inline int node_to_first_cpu(int node) +{ + return first_cpu(cpu_online_map); +} + +/* Replace default node_to_cpumask_ptr with optimized version */ +#define node_to_cpumask_ptr(v, node) \ + cpumask_t *v = _node_to_cpumask_ptr(node) +#define node_to_cpumask_ptr_next(v, node) \ + v = _node_to_cpumask_ptr(node) #endif #include @@ -193,6 +211,9 @@ extern cpumask_t cpu_coregroup_map(int cpu); #define topology_core_id(cpu) (cpu_data(cpu).cpu_core_id) #define topology_core_siblings(cpu) (per_cpu(cpu_core_map, cpu)) #define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu)) + +/* indicates that pointers to the topology cpumask_t maps are valid */ +#define arch_provides_topology_pointers yes #endif static inline void arch_fix_phys_package_id(int num, u32 slot) @@ -220,4 +241,4 @@ static inline void set_mp_bus_to_node(int busnum, int node) } #endif -#endif +#endif /* _ASM_X86_TOPOLOGY_H */ -- cgit v1.2.3 From 7891a24e1ee50c96896c0cf7da216a8e7b573ca5 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Mon, 12 May 2008 21:21:12 +0200 Subject: x86: restore pda nodenumber field * Restore the nodenumber field in the x86_64 pda. This field is slightly different than the x86_cpu_to_node_map mainly because it's a static indication of which node the cpu is on while the cpu to node map is a dyanamic mapping that may get reset if the cpu goes offline. This also simplifies the numa_node_id() macro. For inclusion into sched-devel/latest tree. Based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + sched-devel/latest .../mingo/linux-2.6-sched-devel.git Signed-off-by: Mike Travis Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/setup.c | 4 ++++ include/asm-x86/pda.h | 1 + include/asm-x86/topology.h | 2 +- 3 files changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 03caa8e4351f..0dff17ee3d73 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -32,6 +32,7 @@ EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid); #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) #define X86_64_NUMA 1 +/* map cpu index to node index */ DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE); EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map); #endif @@ -155,6 +156,9 @@ void __cpuinit numa_set_node(int cpu, int node) { int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map); + if (node != NUMA_NO_NODE) + cpu_pda(cpu)->nodenumber = node; + if (cpu_to_node_map) cpu_to_node_map[cpu] = node; diff --git a/include/asm-x86/pda.h b/include/asm-x86/pda.h index 101fb9e11954..de2ad9ac35a9 100644 --- a/include/asm-x86/pda.h +++ b/include/asm-x86/pda.h @@ -22,6 +22,7 @@ struct x8664_pda { offset 40!!! */ #endif char *irqstackptr; + int nodenumber; /* number of current node */ unsigned int __softirq_pending; unsigned int __nmi_count; /* number of NMI on this CPUs */ short mmu_state; diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h index dac09cb66dca..c0e6ff7671ea 100644 --- a/include/asm-x86/topology.h +++ b/include/asm-x86/topology.h @@ -66,7 +66,7 @@ extern cpumask_t node_to_cpumask_map[]; DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map); /* Returns the number of the current Node. */ -#define numa_node_id() (per_cpu(x86_cpu_to_node_map, raw_smp_processor_id())) +#define numa_node_id() read_pda(nodenumber) #ifdef CONFIG_DEBUG_PER_CPU_MAPS extern int cpu_to_node(int cpu); -- cgit v1.2.3 From 9f248bde9d47cc177011198c9a15fb339b9f3215 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Mon, 12 May 2008 21:21:12 +0200 Subject: x86: remove the static 256k node_to_cpumask_map * Consolidate node_to_cpumask operations and remove the 256k byte node_to_cpumask_map. This is done by allocating the node_to_cpumask_map array after the number of possible nodes (nr_node_ids) is known. * Debug printouts when CONFIG_DEBUG_PER_CPU_MAPS is active have been increased. It now shows faults when calling node_to_cpumask() and node_to_cpumask_ptr(). For inclusion into sched-devel/latest tree. Based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + sched-devel/latest .../mingo/linux-2.6-sched-devel.git Signed-off-by: Mike Travis Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/setup.c | 132 +++++++++++++++++++++++++++++++++++++++++++-- arch/x86/mm/numa_64.c | 6 --- include/asm-x86/topology.h | 25 ++++++--- 3 files changed, 144 insertions(+), 19 deletions(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 0dff17ee3d73..913af838c3c5 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -35,6 +35,16 @@ EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid); /* map cpu index to node index */ DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE); EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map); + +/* which logical CPUs are on which nodes */ +cpumask_t *node_to_cpumask_map; +EXPORT_SYMBOL(node_to_cpumask_map); + +/* setup node_to_cpumask_map */ +static void __init setup_node_to_cpumask_map(void); + +#else +static inline void setup_node_to_cpumask_map(void) { } #endif #if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP) @@ -140,11 +150,15 @@ void __init setup_per_cpu_areas(void) } nr_cpu_ids = highest_cpu + 1; - printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d\n", NR_CPUS, nr_cpu_ids); + printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d, nr_node_ids %d\n", + NR_CPUS, nr_cpu_ids, nr_node_ids); /* Setup percpu data maps */ setup_per_cpu_maps(); + /* Setup node to cpumask map */ + setup_node_to_cpumask_map(); + /* Setup cpumask_of_cpu map */ setup_cpumask_of_cpu(); } @@ -152,6 +166,35 @@ void __init setup_per_cpu_areas(void) #endif #ifdef X86_64_NUMA + +/* + * Allocate node_to_cpumask_map based on number of available nodes + * Requires node_possible_map to be valid. + * + * Note: node_to_cpumask() is not valid until after this is done. + */ +static void __init setup_node_to_cpumask_map(void) +{ + unsigned int node, num = 0; + cpumask_t *map; + + /* setup nr_node_ids if not done yet */ + if (nr_node_ids == MAX_NUMNODES) { + for_each_node_mask(node, node_possible_map) + num = node; + nr_node_ids = num + 1; + } + + /* allocate the map */ + map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t)); + + Dprintk(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n", + map, nr_node_ids); + + /* node_to_cpumask() will now work */ + node_to_cpumask_map = map; +} + void __cpuinit numa_set_node(int cpu, int node) { int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map); @@ -174,6 +217,8 @@ void __cpuinit numa_clear_node(int cpu) numa_set_node(cpu, NUMA_NO_NODE); } +#ifndef CONFIG_DEBUG_PER_CPU_MAPS + void __cpuinit numa_add_cpu(int cpu) { cpu_set(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]); @@ -183,9 +228,44 @@ void __cpuinit numa_remove_cpu(int cpu) { cpu_clear(cpu, node_to_cpumask_map[cpu_to_node(cpu)]); } -#endif /* CONFIG_NUMA */ -#if defined(CONFIG_DEBUG_PER_CPU_MAPS) && defined(CONFIG_X86_64) +#else /* CONFIG_DEBUG_PER_CPU_MAPS */ + +/* + * --------- debug versions of the numa functions --------- + */ +static void __cpuinit numa_set_cpumask(int cpu, int enable) +{ + int node = cpu_to_node(cpu); + cpumask_t *mask; + char buf[64]; + + if (node_to_cpumask_map == NULL) { + printk(KERN_ERR "node_to_cpumask_map NULL\n"); + dump_stack(); + return; + } + + mask = &node_to_cpumask_map[node]; + if (enable) + cpu_set(cpu, *mask); + else + cpu_clear(cpu, *mask); + + cpulist_scnprintf(buf, sizeof(buf), *mask); + printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n", + enable? "numa_add_cpu":"numa_remove_cpu", cpu, node, buf); + } + +void __cpuinit numa_add_cpu(int cpu) +{ + numa_set_cpumask(cpu, 1); +} + +void __cpuinit numa_remove_cpu(int cpu) +{ + numa_set_cpumask(cpu, 0); +} int cpu_to_node(int cpu) { @@ -199,6 +279,10 @@ int cpu_to_node(int cpu) } EXPORT_SYMBOL(cpu_to_node); +/* + * Same function as cpu_to_node() but used if called before the + * per_cpu areas are setup. + */ int early_cpu_to_node(int cpu) { if (early_per_cpu_ptr(x86_cpu_to_node_map)) @@ -207,9 +291,47 @@ int early_cpu_to_node(int cpu) if (!per_cpu_offset(cpu)) { printk(KERN_WARNING "early_cpu_to_node(%d): no per_cpu area!\n", cpu); - dump_stack(); + dump_stack(); return NUMA_NO_NODE; } return per_cpu(x86_cpu_to_node_map, cpu); } -#endif + +/* + * Returns a pointer to the bitmask of CPUs on Node 'node'. + */ +cpumask_t *_node_to_cpumask_ptr(int node) +{ + if (node_to_cpumask_map == NULL) { + printk(KERN_WARNING + "_node_to_cpumask_ptr(%d): no node_to_cpumask_map!\n", + node); + dump_stack(); + return &cpu_online_map; + } + return &node_to_cpumask_map[node]; +} +EXPORT_SYMBOL(_node_to_cpumask_ptr); + +/* + * Returns a bitmask of CPUs on Node 'node'. + */ +cpumask_t node_to_cpumask(int node) +{ + if (node_to_cpumask_map == NULL) { + printk(KERN_WARNING + "node_to_cpumask(%d): no node_to_cpumask_map!\n", node); + dump_stack(); + return cpu_online_map; + } + return node_to_cpumask_map[node]; +} +EXPORT_SYMBOL(node_to_cpumask); + +/* + * --------- end of debug versions of the numa functions --------- + */ + +#endif /* CONFIG_DEBUG_PER_CPU_MAPS */ + +#endif /* X86_64_NUMA */ diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 970f86775c41..14c7ab417ec7 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -35,9 +35,6 @@ s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = { [0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE }; -cpumask_t node_to_cpumask_map[MAX_NUMNODES] __read_mostly; -EXPORT_SYMBOL(node_to_cpumask_map); - int numa_off __initdata; unsigned long __initdata nodemap_addr; unsigned long __initdata nodemap_size; @@ -560,9 +557,6 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn) node_set(0, node_possible_map); for (i = 0; i < NR_CPUS; i++) numa_set_node(i, 0); - /* cpumask_of_cpu() may not be available during early startup */ - memset(&node_to_cpumask_map[0], 0, sizeof(node_to_cpumask_map[0])); - cpu_set(0, node_to_cpumask_map[0]); e820_register_active_regions(0, start_pfn, end_pfn); setup_node_bootmem(0, start_pfn << PAGE_SHIFT, end_pfn << PAGE_SHIFT); } diff --git a/include/asm-x86/topology.h b/include/asm-x86/topology.h index c0e6ff7671ea..1f97758de4ab 100644 --- a/include/asm-x86/topology.h +++ b/include/asm-x86/topology.h @@ -57,10 +57,16 @@ static inline int cpu_to_node(int cpu) } #define early_cpu_to_node(cpu) cpu_to_node(cpu) +/* Returns a bitmask of CPUs on Node 'node'. */ +static inline cpumask_t node_to_cpumask(int node) +{ + return node_to_cpumask_map[node]; +} + #else /* CONFIG_X86_64 */ /* Mappings between node number and cpus on that node. */ -extern cpumask_t node_to_cpumask_map[]; +extern cpumask_t *node_to_cpumask_map; /* Mappings between logical cpu number and node number */ DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map); @@ -104,7 +110,6 @@ static inline cpumask_t node_to_cpumask(int node) } #endif /* !CONFIG_DEBUG_PER_CPU_MAPS */ -#endif /* CONFIG_X86_64 */ /* Replace default node_to_cpumask_ptr with optimized version */ #define node_to_cpumask_ptr(v, node) \ @@ -113,12 +118,7 @@ static inline cpumask_t node_to_cpumask(int node) #define node_to_cpumask_ptr_next(v, node) \ v = _node_to_cpumask_ptr(node) -/* Returns the number of the first CPU on Node 'node'. */ -static inline int node_to_first_cpu(int node) -{ - node_to_cpumask_ptr(mask, node); - return first_cpu(*mask); -} +#endif /* CONFIG_X86_64 */ /* * Returns the number of the node containing Node 'node'. This @@ -204,6 +204,15 @@ static inline int node_to_first_cpu(int node) #include +#ifdef CONFIG_NUMA +/* Returns the number of the first CPU on Node 'node'. */ +static inline int node_to_first_cpu(int node) +{ + node_to_cpumask_ptr(mask, node); + return first_cpu(*mask); +} +#endif + extern cpumask_t cpu_coregroup_map(int cpu); #ifdef ENABLE_TOPO_DEFINES -- cgit v1.2.3 From 3461b0af025251bbc6b3d56c821c6ac2de6f7209 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Mon, 12 May 2008 21:21:13 +0200 Subject: x86: remove static boot_cpu_pda array v2 * Remove the boot_cpu_pda array and pointer table from the data section. Allocate the pointer table and array during init. do_boot_cpu() will reallocate the pda in node local memory and if the cpu is being brought up before the bootmem array is released (after_bootmem = 0), then it will free the initial pda. This will happen for all cpus present at system startup. This removes 512k + 32k bytes from the data section. For inclusion into sched-devel/latest tree. Based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + sched-devel/latest .../mingo/linux-2.6-sched-devel.git Signed-off-by: Mike Travis Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/head64.c | 26 +++++++++++++++-- arch/x86/kernel/setup.c | 73 ++++++++++++++++++++++++++++++++++++----------- arch/x86/kernel/setup64.c | 8 ++++-- arch/x86/kernel/smpboot.c | 59 +++++++++++++++++++++++++++++--------- include/asm-x86/pda.h | 6 ++-- include/linux/mm.h | 1 + 6 files changed, 135 insertions(+), 38 deletions(-) diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index e25c57b8aa84..0ab59edd7067 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -25,6 +25,24 @@ #include #include +/* boot cpu pda */ +static struct x8664_pda _boot_cpu_pda __read_mostly; + +#ifdef CONFIG_SMP +#ifdef CONFIG_DEBUG_PER_CPU_MAPS +/* + * We install an empty cpu_pda pointer table to trap references before + * the actual cpu_pda pointer table is created in setup_cpu_pda_map(). + */ +static struct x8664_pda *__cpu_pda[NR_CPUS] __initdata; +#else +static struct x8664_pda *__cpu_pda[1] __read_mostly; +#endif + +#else /* !CONFIG_SMP (NR_CPUS will be 1) */ +static struct x8664_pda *__cpu_pda[NR_CPUS] __read_mostly; +#endif + static void __init zap_identity_mappings(void) { pgd_t *pgd = pgd_offset_k(0UL); @@ -156,10 +174,12 @@ void __init x86_64_start_kernel(char * real_mode_data) early_printk("Kernel alive\n"); - for (i = 0; i < NR_CPUS; i++) - cpu_pda(i) = &boot_cpu_pda[i]; - + _cpu_pda = __cpu_pda; + cpu_pda(0) = &_boot_cpu_pda; pda_init(0); + + early_printk("Kernel really alive\n"); + copy_bootdata(__va(real_mode_data)); reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS"); diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 913af838c3c5..dd12c1c84a8f 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -101,6 +101,50 @@ static inline void setup_cpumask_of_cpu(void) { } */ unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; EXPORT_SYMBOL(__per_cpu_offset); +static inline void setup_cpu_pda_map(void) { } + +#elif !defined(CONFIG_SMP) +static inline void setup_cpu_pda_map(void) { } + +#else /* CONFIG_SMP && CONFIG_X86_64 */ + +/* + * Allocate cpu_pda pointer table and array via alloc_bootmem. + */ +static void __init setup_cpu_pda_map(void) +{ + char *pda; + struct x8664_pda **new_cpu_pda; + unsigned long size; + int cpu; + + size = roundup(sizeof(struct x8664_pda), cache_line_size()); + + /* allocate cpu_pda array and pointer table */ + { + unsigned long tsize = nr_cpu_ids * sizeof(void *); + unsigned long asize = size * (nr_cpu_ids - 1); + + tsize = roundup(tsize, cache_line_size()); + new_cpu_pda = alloc_bootmem(tsize + asize); + pda = (char *)new_cpu_pda + tsize; + } + + /* initialize pointer table to static pda's */ + for_each_possible_cpu(cpu) { + if (cpu == 0) { + /* leave boot cpu pda in place */ + new_cpu_pda[0] = cpu_pda(0); + continue; + } + new_cpu_pda[cpu] = (struct x8664_pda *)pda; + new_cpu_pda[cpu]->in_bootmem = 1; + pda += size; + } + + /* point to new pointer table */ + _cpu_pda = new_cpu_pda; +} #endif /* @@ -110,46 +154,43 @@ EXPORT_SYMBOL(__per_cpu_offset); */ void __init setup_per_cpu_areas(void) { - int i, highest_cpu = 0; - unsigned long size; + ssize_t size = PERCPU_ENOUGH_ROOM; + char *ptr; + int cpu; #ifdef CONFIG_HOTPLUG_CPU prefill_possible_map(); +#else + nr_cpu_ids = num_processors; #endif + /* Setup cpu_pda map */ + setup_cpu_pda_map(); + /* Copy section for each CPU (we discard the original) */ size = PERCPU_ENOUGH_ROOM; printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", size); - for_each_possible_cpu(i) { - char *ptr; + for_each_possible_cpu(cpu) { #ifndef CONFIG_NEED_MULTIPLE_NODES ptr = alloc_bootmem_pages(size); #else - int node = early_cpu_to_node(i); + int node = early_cpu_to_node(cpu); if (!node_online(node) || !NODE_DATA(node)) { ptr = alloc_bootmem_pages(size); printk(KERN_INFO "cpu %d has no node %d or node-local memory\n", - i, node); + cpu, node); } else ptr = alloc_bootmem_pages_node(NODE_DATA(node), size); #endif - if (!ptr) - panic("Cannot allocate cpu data for CPU %d\n", i); -#ifdef CONFIG_X86_64 - cpu_pda(i)->data_offset = ptr - __per_cpu_start; -#else - __per_cpu_offset[i] = ptr - __per_cpu_start; -#endif + per_cpu_offset(cpu) = ptr - __per_cpu_start; memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); - highest_cpu = i; } - nr_cpu_ids = highest_cpu + 1; printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d, nr_node_ids %d\n", NR_CPUS, nr_cpu_ids, nr_node_ids); @@ -199,7 +240,7 @@ void __cpuinit numa_set_node(int cpu, int node) { int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map); - if (node != NUMA_NO_NODE) + if (cpu_pda(cpu) && node != NUMA_NO_NODE) cpu_pda(cpu)->nodenumber = node; if (cpu_to_node_map) diff --git a/arch/x86/kernel/setup64.c b/arch/x86/kernel/setup64.c index aee0e8200777..631ea6cc01d8 100644 --- a/arch/x86/kernel/setup64.c +++ b/arch/x86/kernel/setup64.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -34,9 +35,8 @@ struct boot_params boot_params; cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; -struct x8664_pda *_cpu_pda[NR_CPUS] __read_mostly; +struct x8664_pda **_cpu_pda __read_mostly; EXPORT_SYMBOL(_cpu_pda); -struct x8664_pda boot_cpu_pda[NR_CPUS] __cacheline_aligned; struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; @@ -114,8 +114,10 @@ void pda_init(int cpu) __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); if (!pda->irqstackptr) panic("cannot allocate irqstack for cpu %d", cpu); - } + if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE) + pda->nodenumber = cpu_to_node(cpu); + } pda->irqstackptr += IRQSTACKSIZE-64; } diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 036604d3daed..bf0833487455 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -816,6 +816,43 @@ static void __cpuinit do_fork_idle(struct work_struct *work) complete(&c_idle->done); } +/* + * Allocate node local memory for the AP pda. + * + * Must be called after the _cpu_pda pointer table is initialized. + */ +static int __cpuinit get_local_pda(int cpu) +{ + struct x8664_pda *oldpda, *newpda; + unsigned long size = sizeof(struct x8664_pda); + int node = cpu_to_node(cpu); + + if (cpu_pda(cpu) && !cpu_pda(cpu)->in_bootmem) + return 0; + + oldpda = cpu_pda(cpu); + newpda = kmalloc_node(size, GFP_ATOMIC, node); + if (!newpda) { + printk(KERN_ERR "Could not allocate node local PDA " + "for CPU %d on node %d\n", cpu, node); + + if (oldpda) + return 0; /* have a usable pda */ + else + return -1; + } + + if (oldpda) { + memcpy(newpda, oldpda, size); + if (!after_bootmem) + free_bootmem((unsigned long)oldpda, size); + } + + newpda->in_bootmem = 0; + cpu_pda(cpu) = newpda; + return 0; +} + static int __cpuinit do_boot_cpu(int apicid, int cpu) /* * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad @@ -841,19 +878,11 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) } /* Allocate node local memory for AP pdas */ - if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) { - struct x8664_pda *newpda, *pda; - int node = cpu_to_node(cpu); - pda = cpu_pda(cpu); - newpda = kmalloc_node(sizeof(struct x8664_pda), GFP_ATOMIC, - node); - if (newpda) { - memcpy(newpda, pda, sizeof(struct x8664_pda)); - cpu_pda(cpu) = newpda; - } else - printk(KERN_ERR - "Could not allocate node local PDA for CPU %d on node %d\n", - cpu, node); + if (cpu > 0) { + boot_error = get_local_pda(cpu); + if (boot_error) + goto restore_state; + /* if can't get pda memory, can't start cpu */ } #endif @@ -972,6 +1001,8 @@ do_rest: } } +restore_state: + if (boot_error) { /* Try to put things back the way they were before ... */ unmap_cpu_to_logical_apicid(cpu); @@ -1347,6 +1378,8 @@ __init void prefill_possible_map(void) for (i = 0; i < possible; i++) cpu_set(i, cpu_possible_map); + + nr_cpu_ids = possible; } static void __ref remove_cpu_from_maps(int cpu) diff --git a/include/asm-x86/pda.h b/include/asm-x86/pda.h index de2ad9ac35a9..b34e9a7cc80b 100644 --- a/include/asm-x86/pda.h +++ b/include/asm-x86/pda.h @@ -22,7 +22,8 @@ struct x8664_pda { offset 40!!! */ #endif char *irqstackptr; - int nodenumber; /* number of current node */ + short nodenumber; /* number of current node (32k max) */ + short in_bootmem; /* pda lives in bootmem */ unsigned int __softirq_pending; unsigned int __nmi_count; /* number of NMI on this CPUs */ short mmu_state; @@ -38,8 +39,7 @@ struct x8664_pda { unsigned irq_spurious_count; } ____cacheline_aligned_in_smp; -extern struct x8664_pda *_cpu_pda[]; -extern struct x8664_pda boot_cpu_pda[]; +extern struct x8664_pda **_cpu_pda; extern void pda_init(int); #define cpu_pda(i) (_cpu_pda[i]) diff --git a/include/linux/mm.h b/include/linux/mm.h index 586a943cab01..0ea48a5af823 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1024,6 +1024,7 @@ extern void mem_init(void); extern void show_mem(void); extern void si_meminfo(struct sysinfo * val); extern void si_meminfo_node(struct sysinfo *val, int nid); +extern int after_bootmem; #ifdef CONFIG_NUMA extern void setup_per_cpu_pageset(void); -- cgit v1.2.3 From 5deb0b2a25b7b568ab81f7c38052572ecf4ccc96 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Mon, 12 May 2008 21:21:13 +0200 Subject: x86: leave initial __cpu_pda array in place until cpus are booted Ingo Molnar wrote: ... > they crashed after about 3 randconfig iterations with: > > early res: 4 [8000-afff] PGTABLE > early res: 5 [b000-b87f] MEMNODEMAP > PANIC: early exception 0e rip 10:ffffffff8077a150 error 2 cr2 37 > Pid: 0, comm: swapper Not tainted 2.6.25-sched-devel.git-x86-latest.git #14 > > Call Trace: > [] early_idt_handler+0x56/0x6a > [] ? numa_set_node+0x30/0x60 > [] ? numa_set_node+0x9/0x60 > [] numa_init_array+0x93/0xf0 > [] acpi_scan_nodes+0x3b9/0x3f0 > [] numa_initmem_init+0x136/0x150 > [] setup_arch+0x48f/0x700 > [] ? clockevents_register_notifier+0x3a/0x50 > [] start_kernel+0xd7/0x440 > [] x86_64_start_kernel+0x222/0x280 ... Here's the fixup... This one should follow the previous patches. Thanks, Mike Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/head64.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 0ab59edd7067..4bcb61cd9fcd 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -29,17 +29,13 @@ static struct x8664_pda _boot_cpu_pda __read_mostly; #ifdef CONFIG_SMP -#ifdef CONFIG_DEBUG_PER_CPU_MAPS /* - * We install an empty cpu_pda pointer table to trap references before - * the actual cpu_pda pointer table is created in setup_cpu_pda_map(). + * We install an empty cpu_pda pointer table to indicate to early users + * (numa_set_node) that the cpu_pda pointer table for cpus other than + * the boot cpu is not yet setup. */ static struct x8664_pda *__cpu_pda[NR_CPUS] __initdata; #else -static struct x8664_pda *__cpu_pda[1] __read_mostly; -#endif - -#else /* !CONFIG_SMP (NR_CPUS will be 1) */ static struct x8664_pda *__cpu_pda[NR_CPUS] __read_mostly; #endif -- cgit v1.2.3 From f307d25e638d3408659a2ec98fb3fd1737f7cb31 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 21 May 2008 11:21:13 +0100 Subject: x86: compile error fix for smpboot.c Without this patch, my link fails with: arch/x86/kernel/built-in.o(.cpuinit.text+0x3c6e): In function `get_local_pda': : undefined reference to `_cpu_pda' arch/x86/kernel/built-in.o(.cpuinit.text+0x3cd1): In function `get_local_pda': : undefined reference to `after_bootmem' arch/x86/kernel/built-in.o(.cpuinit.text+0x3cec): In function `get_local_pda': : undefined reference to `_cpu_pda' make[2]: *** [.tmp_vmlinux1] Error 1 Caused by commit 766da892634694f795b18b9538407816896fc470 x86: remove static boot_cpu_pda array v2 Signed-off-by: Thomas Gleixner --- arch/x86/kernel/smpboot.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index bf0833487455..bc1e1257e515 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -816,6 +816,7 @@ static void __cpuinit do_fork_idle(struct work_struct *work) complete(&c_idle->done); } +#ifdef CONFIG_X86_64 /* * Allocate node local memory for the AP pda. * @@ -852,6 +853,7 @@ static int __cpuinit get_local_pda(int cpu) cpu_pda(cpu) = newpda; return 0; } +#endif /* CONFIG_X86_64 */ static int __cpuinit do_boot_cpu(int apicid, int cpu) /* -- cgit v1.2.3 From 864fc31ea59798905a37cd896a3e093915a3b366 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: x86: numa_64.c make local variables static plat_node_bdata, cmdline, nodemap_addr, nodemap_size are local to numa_64.c. Make them static Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/numa_64.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 14c7ab417ec7..824344f1742f 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -27,7 +27,7 @@ struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); -bootmem_data_t plat_node_bdata[MAX_NUMNODES]; +static bootmem_data_t plat_node_bdata[MAX_NUMNODES]; struct memnode memnode; @@ -36,8 +36,8 @@ s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = { }; int numa_off __initdata; -unsigned long __initdata nodemap_addr; -unsigned long __initdata nodemap_size; +static unsigned long __initdata nodemap_addr; +static unsigned long __initdata nodemap_size; /* * Given a shift value, try to populate memnodemap[] @@ -296,7 +296,7 @@ void __init numa_init_array(void) #ifdef CONFIG_NUMA_EMU /* Numa emulation */ -char *cmdline __initdata; +static char *cmdline __initdata; /* * Setups up nid to range from addr to addr + size. If the end -- cgit v1.2.3 From 886533a3e370a6d5c4e46819d1e14bd2f20dbb3a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 May 2008 15:43:36 +0200 Subject: x86: numa_64.c fix shadowed variable sparse mutters: arch/x86/mm/numa_64.c:195:27: warning: symbol 'end_pfn' shadows an earlier one Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/mm/numa_64.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 824344f1742f..a1f3778b4680 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -179,7 +179,7 @@ static void * __init early_node_mem(int nodeid, unsigned long start, void __init setup_node_bootmem(int nodeid, unsigned long start, unsigned long end) { - unsigned long start_pfn, end_pfn, bootmap_pages, bootmap_size; + unsigned long start_pfn, last_pfn, bootmap_pages, bootmap_size; unsigned long bootmap_start, nodedata_phys; void *bootmap; const int pgdat_size = round_up(sizeof(pg_data_t), PAGE_SIZE); @@ -191,7 +191,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, start, end); start_pfn = start >> PAGE_SHIFT; - end_pfn = end >> PAGE_SHIFT; + last_pfn = end >> PAGE_SHIFT; node_data[nodeid] = early_node_mem(nodeid, start, end, pgdat_size, SMP_CACHE_BYTES); @@ -204,7 +204,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t)); NODE_DATA(nodeid)->bdata = &plat_node_bdata[nodeid]; NODE_DATA(nodeid)->node_start_pfn = start_pfn; - NODE_DATA(nodeid)->node_spanned_pages = end_pfn - start_pfn; + NODE_DATA(nodeid)->node_spanned_pages = last_pfn - start_pfn; /* * Find a place for the bootmem map @@ -213,7 +213,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, * early_node_mem will get that with find_e820_area instead * of alloc_bootmem, that could clash with reserved range */ - bootmap_pages = bootmem_bootmap_pages(end_pfn - start_pfn); + bootmap_pages = bootmem_bootmap_pages(last_pfn - start_pfn); nid = phys_to_nid(nodedata_phys); if (nid == nodeid) bootmap_start = round_up(nodedata_phys + pgdat_size, PAGE_SIZE); @@ -235,7 +235,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start, bootmap_size = init_bootmem_node(NODE_DATA(nodeid), bootmap_start >> PAGE_SHIFT, - start_pfn, end_pfn); + start_pfn, last_pfn); printk(KERN_INFO " bootmap [%016lx - %016lx] pages %lx\n", bootmap_start, bootmap_start + bootmap_size - 1, @@ -400,15 +400,15 @@ static int __init split_nodes_by_size(struct bootnode *nodes, u64 *addr, } /* - * Sets up the system RAM area from start_pfn to end_pfn according to the + * Sets up the system RAM area from start_pfn to last_pfn according to the * numa=fake command-line option. */ static struct bootnode nodes[MAX_NUMNODES] __initdata; -static int __init numa_emulation(unsigned long start_pfn, unsigned long end_pfn) +static int __init numa_emulation(unsigned long start_pfn, unsigned long last_pfn) { u64 size, addr = start_pfn << PAGE_SHIFT; - u64 max_addr = end_pfn << PAGE_SHIFT; + u64 max_addr = last_pfn << PAGE_SHIFT; int num_nodes = 0, num = 0, coeff_flag, coeff = -1, i; memset(&nodes, 0, sizeof(nodes)); @@ -514,7 +514,7 @@ out: } #endif /* CONFIG_NUMA_EMU */ -void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn) +void __init numa_initmem_init(unsigned long start_pfn, unsigned long last_pfn) { int i; @@ -522,7 +522,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn) nodes_clear(node_online_map); #ifdef CONFIG_NUMA_EMU - if (cmdline && !numa_emulation(start_pfn, end_pfn)) + if (cmdline && !numa_emulation(start_pfn, last_pfn)) return; nodes_clear(node_possible_map); nodes_clear(node_online_map); @@ -530,7 +530,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn) #ifdef CONFIG_ACPI_NUMA if (!numa_off && !acpi_scan_nodes(start_pfn << PAGE_SHIFT, - end_pfn << PAGE_SHIFT)) + last_pfn << PAGE_SHIFT)) return; nodes_clear(node_possible_map); nodes_clear(node_online_map); @@ -538,7 +538,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn) #ifdef CONFIG_K8_NUMA if (!numa_off && !k8_scan_nodes(start_pfn< Date: Mon, 12 May 2008 21:21:12 +0200 Subject: sched, numa: replace MAX_NUMNODES with nr_node_ids in kernel/sched.c * Replace usages of MAX_NUMNODES with nr_node_ids in kernel/sched.c, where appropriate. This saves some allocated space as well as many wasted cycles going through node entries that are non-existent. Signed-off-by: Mike Travis Signed-off-by: Ingo Molnar --- kernel/sched.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 94ead43eda62..bcc22b569ee9 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6538,9 +6538,9 @@ static int find_next_best_node(int node, nodemask_t *used_nodes) min_val = INT_MAX; - for (i = 0; i < MAX_NUMNODES; i++) { + for (i = 0; i < nr_node_ids; i++) { /* Start at @node */ - n = (node + i) % MAX_NUMNODES; + n = (node + i) % nr_node_ids; if (!nr_cpus_node(n)) continue; @@ -6734,7 +6734,7 @@ static void free_sched_groups(const cpumask_t *cpu_map, cpumask_t *nodemask) if (!sched_group_nodes) continue; - for (i = 0; i < MAX_NUMNODES; i++) { + for (i = 0; i < nr_node_ids; i++) { struct sched_group *oldsg, *sg = sched_group_nodes[i]; *nodemask = node_to_cpumask(i); @@ -6927,7 +6927,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map, /* * Allocate the per-node list of sched groups */ - sched_group_nodes = kcalloc(MAX_NUMNODES, sizeof(struct sched_group *), + sched_group_nodes = kcalloc(nr_node_ids, sizeof(struct sched_group *), GFP_KERNEL); if (!sched_group_nodes) { printk(KERN_WARNING "Can not alloc sched group node list\n"); @@ -7066,7 +7066,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map, #endif /* Set up physical groups */ - for (i = 0; i < MAX_NUMNODES; i++) { + for (i = 0; i < nr_node_ids; i++) { SCHED_CPUMASK_VAR(nodemask, allmasks); SCHED_CPUMASK_VAR(send_covered, allmasks); @@ -7090,7 +7090,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map, send_covered, tmpmask); } - for (i = 0; i < MAX_NUMNODES; i++) { + for (i = 0; i < nr_node_ids; i++) { /* Set up node groups */ struct sched_group *sg, *prev; SCHED_CPUMASK_VAR(nodemask, allmasks); @@ -7129,9 +7129,9 @@ static int __build_sched_domains(const cpumask_t *cpu_map, cpus_or(*covered, *covered, *nodemask); prev = sg; - for (j = 0; j < MAX_NUMNODES; j++) { + for (j = 0; j < nr_node_ids; j++) { SCHED_CPUMASK_VAR(notcovered, allmasks); - int n = (i + j) % MAX_NUMNODES; + int n = (i + j) % nr_node_ids; node_to_cpumask_ptr(pnodemask, n); cpus_complement(*notcovered, *covered); @@ -7184,7 +7184,7 @@ static int __build_sched_domains(const cpumask_t *cpu_map, } #ifdef CONFIG_NUMA - for (i = 0; i < MAX_NUMNODES; i++) + for (i = 0; i < nr_node_ids; i++) init_numa_sched_groups_power(sched_group_nodes[i]); if (sd_allnodes) { -- cgit v1.2.3 From 03db1f74a7d823e3de3767f36b1e08829f6fb3a1 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 6 Jun 2008 16:33:25 +0200 Subject: x86: don't return invalid pointers from node_to_cpumask() Signed-off-by: Vegard Nossum Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index dd12c1c84a8f..df49ce87a300 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -350,6 +350,7 @@ cpumask_t *_node_to_cpumask_ptr(int node) dump_stack(); return &cpu_online_map; } + BUG_ON(node >= nr_node_ids); return &node_to_cpumask_map[node]; } EXPORT_SYMBOL(_node_to_cpumask_ptr); @@ -365,6 +366,7 @@ cpumask_t node_to_cpumask(int node) dump_stack(); return cpu_online_map; } + BUG_ON(node >= nr_node_ids); return node_to_cpumask_map[node]; } EXPORT_SYMBOL(node_to_cpumask); -- cgit v1.2.3 From 053713f5745b8b08fb598adb65230bc168cb9d8d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 5 Jun 2008 11:10:59 -0700 Subject: x86: fix setup.c printk format warning Fix setup.c printk format warning: linux-next-20080605/arch/x86/kernel/setup.c: In function 'setup_per_cpu_areas': linux-next-20080605/arch/x86/kernel/setup.c:173: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'ssize_t' Signed-off-by: Randy Dunlap Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index df49ce87a300..d4eaa4eb481d 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -169,7 +169,7 @@ void __init setup_per_cpu_areas(void) /* Copy section for each CPU (we discard the original) */ size = PERCPU_ENOUGH_ROOM; - printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", + printk(KERN_INFO "PERCPU: Allocating %zd bytes of per cpu data\n", size); for_each_possible_cpu(cpu) { -- cgit v1.2.3 From 3fd052b1b46ac23a2316283a996fe6c32dbcf132 Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Sun, 8 Jun 2008 15:46:30 +0200 Subject: x86: add flags parameter to reserve_bootmem_generic() This patch adds a 'flags' parameter to reserve_bootmem_generic() like it already has been added in reserve_bootmem() with commit 72a7fe3967dbf86cb34e24fbf1d957fe24d2f246. It also changes all users to use BOOTMEM_DEFAULT, which doesn't effectively change the behaviour. Since the change is x86-specific, I don't think it's necessary to add a new API for migration. There are only 4 users of that function. The change is necessary for the next patch, using reserve_bootmem_generic() for crashkernel reservation. Signed-off-by: Bernhard Walle Signed-off-by: Ingo Molnar --- arch/x86/kernel/e820_64.c | 3 ++- arch/x86/kernel/efi_64.c | 3 ++- arch/x86/kernel/mpparse.c | 5 +++-- arch/x86/mm/init_64.c | 17 ++++++++++++----- include/asm-x86/proto.h | 2 +- 5 files changed, 20 insertions(+), 10 deletions(-) diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c index 124480c0008d..af1eb0789740 100644 --- a/arch/x86/kernel/e820_64.c +++ b/arch/x86/kernel/e820_64.c @@ -118,7 +118,8 @@ void __init early_res_to_bootmem(unsigned long start, unsigned long end) continue; printk(KERN_INFO " early res: %d [%lx-%lx] %s\n", i, final_start, final_end - 1, r->name); - reserve_bootmem_generic(final_start, final_end - final_start); + reserve_bootmem_generic(final_start, final_end - final_start, + BOOTMEM_DEFAULT); } } diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c index d0060fdcccac..d561dd5f1e62 100644 --- a/arch/x86/kernel/efi_64.c +++ b/arch/x86/kernel/efi_64.c @@ -100,7 +100,8 @@ void __init efi_call_phys_epilog(void) void __init efi_reserve_bootmem(void) { reserve_bootmem_generic((unsigned long)memmap.phys_map, - memmap.nr_map * memmap.desc_size); + memmap.nr_map * memmap.desc_size, + BOOTMEM_DEFAULT); } void __iomem * __init efi_ioremap(unsigned long phys_addr, unsigned long size) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 404683b94e79..4901ae3f742c 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -729,10 +729,11 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, if (!reserve) return 1; - reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE); + reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE, + BOOTMEM_DEFAULT); if (mpf->mpf_physptr) reserve_bootmem_generic(mpf->mpf_physptr, - PAGE_SIZE); + PAGE_SIZE, BOOTMEM_DEFAULT); #endif return 1; } diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 819dad973b13..bf7bf1de6c25 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -799,12 +799,13 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif -void __init reserve_bootmem_generic(unsigned long phys, unsigned len) +int __init reserve_bootmem_generic(unsigned long phys, unsigned len, int flags) { #ifdef CONFIG_NUMA int nid, next_nid; #endif unsigned long pfn = phys >> PAGE_SHIFT; + int ret; if (pfn >= end_pfn) { /* @@ -812,11 +813,11 @@ void __init reserve_bootmem_generic(unsigned long phys, unsigned len) * firmware tables: */ if (pfn < max_pfn_mapped) - return; + return -EFAULT; printk(KERN_ERR "reserve_bootmem: illegal reserve %lx %u\n", phys, len); - return; + return -EFAULT; } /* Should check here against the e820 map to avoid double free */ @@ -824,9 +825,13 @@ void __init reserve_bootmem_generic(unsigned long phys, unsigned len) nid = phys_to_nid(phys); next_nid = phys_to_nid(phys + len - 1); if (nid == next_nid) - reserve_bootmem_node(NODE_DATA(nid), phys, len, BOOTMEM_DEFAULT); + ret = reserve_bootmem_node(NODE_DATA(nid), phys, len, flags); else - reserve_bootmem(phys, len, BOOTMEM_DEFAULT); + ret = reserve_bootmem(phys, len, flags); + + if (ret != 0) + return ret; + #else reserve_bootmem(phys, len, BOOTMEM_DEFAULT); #endif @@ -835,6 +840,8 @@ void __init reserve_bootmem_generic(unsigned long phys, unsigned len) dma_reserve += len / PAGE_SIZE; set_dma_reserve(dma_reserve); } + + return 0; } int kern_addr_valid(unsigned long addr) diff --git a/include/asm-x86/proto.h b/include/asm-x86/proto.h index 6c8b41b03f6d..a9f51472521e 100644 --- a/include/asm-x86/proto.h +++ b/include/asm-x86/proto.h @@ -14,7 +14,7 @@ extern void ia32_syscall(void); extern void ia32_cstar_target(void); extern void ia32_sysenter_target(void); -extern void reserve_bootmem_generic(unsigned long phys, unsigned len); +extern int reserve_bootmem_generic(unsigned long phys, unsigned len, int flags); extern void syscall32_cpu_init(void); -- cgit v1.2.3 From 46f68e1c6b04a04772e828ff3bcd07ed708805c2 Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Sun, 8 Jun 2008 15:46:31 +0200 Subject: x86: use reserve_bootmem_generic() to reserve crashkernel memory on x86_64 This patch uses reserve_bootmem_generic() instead of reserve_bootmem() to reserve the crashkernel memory on x86_64. That's necessary for NUMA machines, see 00212fef814612245ed0261cbac8426d0c9a31a5: [PATCH] Fix kdump Crash Kernel boot memory reservation for NUMA machines This patch will fix a boot memory reservation bug that trashes memory on the ES7000 when loading the kdump crash kernel. The code in arch/x86_64/kernel/setup.c to reserve boot memory for the crash kernel uses the non-numa aware "reserve_bootmem" function instead of the NUMA aware "reserve_bootmem_generic". I checked to make sure that no other function was using "reserve_bootmem" and found none, except the ones that had NUMA ifdef'ed out. I have tested this patch only on an ES7000 with NUMA on and off (numa=off) in a single (non-NUMA) and multi-cell (NUMA) configurations. Signed-off-by: Amul Shah Looks-good-to: Vivek Goyal Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds The switch-back to reserve_bootmem() was accidentally introduced in 5c3391f9f749023a49c64d607da4fb49263690eb when adding the BOOTMEM_EXCLUSIVE parameter. Signed-off-by: Bernhard Walle Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index e8df64fad540..4a666cdccb68 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -243,7 +243,7 @@ static void __init reserve_crashkernel(void) return; } - if (reserve_bootmem(crash_base, crash_size, + if (reserve_bootmem_generic(crash_base, crash_size, BOOTMEM_EXCLUSIVE) < 0) { printk(KERN_INFO "crashkernel reservation failed - " "memory is in use\n"); -- cgit v1.2.3 From 568b4933a9902aed0f51e2e1bea3da157fb18833 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 8 Jul 2008 03:06:46 -0700 Subject: irda: via-ircc proper dma freeing 1. dma should be freed when dma2 request fail. 2. dma2 should be freed too when device close. Signed-off-by: Wang Chen Signed-off-by: Samuel Ortiz Signed-off-by: David S. Miller --- drivers/net/irda/via-ircc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c index 58e128784585..04ad3573b159 100644 --- a/drivers/net/irda/via-ircc.c +++ b/drivers/net/irda/via-ircc.c @@ -1546,6 +1546,7 @@ static int via_ircc_net_open(struct net_device *dev) IRDA_WARNING("%s, unable to allocate dma2=%d\n", driver_name, self->io.dma2); free_irq(self->io.irq, self); + free_dma(self->io.dma); return -EAGAIN; } } @@ -1606,6 +1607,8 @@ static int via_ircc_net_close(struct net_device *dev) EnAllInt(iobase, OFF); free_irq(self->io.irq, dev); free_dma(self->io.dma); + if (self->io.dma2 != self->io.dma) + free_dma(self->io.dma2); return 0; } -- cgit v1.2.3 From 02307080622da0312f2ede0f9c0ac779a1cc4f9a Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Tue, 8 Jul 2008 03:07:16 -0700 Subject: irda: New device ID for nsc-ircc HP OmniBook 500's DSDT code changes the HID of the FIR device from NSC6001 to HWPC224 when run under an "NT" operating system. Add the new ID to the pnp device id table. Signed-off-by: Ville Syrjala Signed-off-by: Samuel Ortiz Signed-off-by: David S. Miller --- drivers/net/irda/nsc-ircc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index a7714da7c283..effc1ce8179a 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -152,6 +152,7 @@ static chipio_t pnp_info; static const struct pnp_device_id nsc_ircc_pnp_table[] = { { .id = "NSC6001", .driver_data = 0 }, { .id = "IBM0071", .driver_data = 0 }, + { .id = "HWPC224", .driver_data = 0 }, { } }; -- cgit v1.2.3 From 07035fc1bbf931a06e47583cddd2cea2907ac0db Mon Sep 17 00:00:00 2001 From: Julius Volz Date: Tue, 8 Jul 2008 03:07:43 -0700 Subject: irda: Fix netlink error path return value Fix an incorrect return value check of genlmsg_put() in irda_nl_get_mode(). genlmsg_put() does not use ERR_PTR() to encode return values, it just returns NULL on error. Signed-off-by: Julius Volz Signed-off-by: Samuel Ortiz Signed-off-by: David S. Miller --- net/irda/irnetlink.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/irda/irnetlink.c b/net/irda/irnetlink.c index 9e1fb82e3220..2f05ec1037ab 100644 --- a/net/irda/irnetlink.c +++ b/net/irda/irnetlink.c @@ -101,8 +101,8 @@ static int irda_nl_get_mode(struct sk_buff *skb, struct genl_info *info) hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq, &irda_nl_family, 0, IRDA_NL_CMD_GET_MODE); - if (IS_ERR(hdr)) { - ret = PTR_ERR(hdr); + if (hdr == NULL) { + ret = -EMSGSIZE; goto err_out; } -- cgit v1.2.3 From 1812924bb1823950c1dc95c478b71b037057356e Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Mon, 2 Jun 2008 08:56:14 -0500 Subject: x86, SGI UV: TLB shootdown using broadcast assist unit TLB shootdown for SGI UV. Depends on patch (in tip/x86/irq): x86-update-macros-used-by-uv-platform.patch Jack Steiner May 29 This patch provides the ability to flush TLB's in cpu's that are not on the local node. The hardware mechanism for distributing the flush messages is the UV's "broadcast assist unit". The hook to intercept TLB shootdown requests is a 2-line change to native_flush_tlb_others() (arch/x86/kernel/tlb_64.c). This code has been tested on a hardware simulator. The real hardware is not yet available. The shootdown statistics are provided through /proc/sgi_uv/ptc_statistics. The use of /sys was considered, but would have required the use of many /sys files. The debugfs was also considered, but these statistics should be available on an ongoing basis, not just for debugging. Issues to be fixed later: - The IRQ for the messaging interrupt is currently hardcoded as 200 (see UV_BAU_MESSAGE). It should be dynamically assigned in the future. - The use of appropriate udelay()'s is untested, as they are a problem in the simulator. Signed-off-by: Cliff Wickman Signed-off-by: Ingo Molnar --- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/entry_64.S | 4 + arch/x86/kernel/tlb_64.c | 5 + arch/x86/kernel/tlb_uv.c | 736 ++++++++++++++++++++++++++++++++++++++++++++ include/asm-x86/uv/uv_bau.h | 331 ++++++++++++++++++++ 5 files changed, 1077 insertions(+), 1 deletion(-) create mode 100644 arch/x86/kernel/tlb_uv.c create mode 100644 include/asm-x86/uv/uv_bau.h diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 605995e11ea7..4078e98f0125 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -94,7 +94,7 @@ obj-$(CONFIG_OLPC) += olpc.o ### # 64 bit specific files ifeq ($(CONFIG_X86_64),y) - obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o + obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o obj-$(CONFIG_AUDIT) += audit_64.o diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 556a8df522a7..6fd1987466eb 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -720,6 +720,10 @@ ENTRY(apic_timer_interrupt) apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt END(apic_timer_interrupt) +ENTRY(uv_bau_message_intr1) + apicinterrupt 220,uv_bau_message_interrupt +END(uv_bau_message_intr1) + ENTRY(error_interrupt) apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt END(error_interrupt) diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c index a1f07d793202..fc132113bdab 100644 --- a/arch/x86/kernel/tlb_64.c +++ b/arch/x86/kernel/tlb_64.c @@ -15,6 +15,8 @@ #include #include #include +#include +#include #include /* @@ -162,6 +164,9 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, union smp_flush_state *f; cpumask_t cpumask = *cpumaskp; + if (is_uv_system() && uv_flush_tlb_others(&cpumask, mm, va)) + return; + /* Caller has disabled preemption */ sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS; f = &per_cpu(flush_state, sender); diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c new file mode 100644 index 000000000000..28e7c68d9d78 --- /dev/null +++ b/arch/x86/kernel/tlb_uv.c @@ -0,0 +1,736 @@ +/* + * SGI UltraViolet TLB flush routines. + * + * (c) 2008 Cliff Wickman , SGI. + * + * This code is released under the GNU General Public License version 2 or + * later. + */ +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +struct bau_control **uv_bau_table_bases; +static int uv_bau_retry_limit; +static int uv_nshift; /* position of pnode (which is nasid>>1) */ +static unsigned long uv_mmask; + +char *status_table[] = { + "IDLE", + "ACTIVE", + "DESTINATION TIMEOUT", + "SOURCE TIMEOUT" +}; + +DEFINE_PER_CPU(struct ptc_stats, ptcstats); +DEFINE_PER_CPU(struct bau_control, bau_control); + +/* + * Free a software acknowledge hardware resource by clearing its Pending + * bit. This will return a reply to the sender. + * If the message has timed out, a reply has already been sent by the + * hardware but the resource has not been released. In that case our + * clear of the Timeout bit (as well) will free the resource. No reply will + * be sent (the hardware will only do one reply per message). + */ +static void +uv_reply_to_message(int resource, + struct bau_payload_queue_entry *msg, + struct bau_msg_status *msp) +{ + int fw; + + fw = (1 << (resource + UV_SW_ACK_NPENDING)) | (1 << resource); + msg->replied_to = 1; + msg->sw_ack_vector = 0; + if (msp) + msp->seen_by.bits = 0; + uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, fw); + return; +} + +/* + * Do all the things a cpu should do for a TLB shootdown message. + * Other cpu's may come here at the same time for this message. + */ +static void +uv_bau_process_message(struct bau_payload_queue_entry *msg, + int msg_slot, int sw_ack_slot) +{ + int cpu; + unsigned long this_cpu_mask; + struct bau_msg_status *msp; + + msp = __get_cpu_var(bau_control).msg_statuses + msg_slot; + cpu = uv_blade_processor_id(); + msg->number_of_cpus = + uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id())); + this_cpu_mask = (unsigned long)1 << cpu; + if (msp->seen_by.bits & this_cpu_mask) + return; + atomic_or_long(&msp->seen_by.bits, this_cpu_mask); + + if (msg->replied_to == 1) + return; + + if (msg->address == TLB_FLUSH_ALL) { + local_flush_tlb(); + __get_cpu_var(ptcstats).alltlb++; + } else { + __flush_tlb_one(msg->address); + __get_cpu_var(ptcstats).onetlb++; + } + + __get_cpu_var(ptcstats).requestee++; + + atomic_inc_short(&msg->acknowledge_count); + if (msg->number_of_cpus == msg->acknowledge_count) + uv_reply_to_message(sw_ack_slot, msg, msp); + return; +} + +/* + * Examine the payload queue on all the distribution nodes to see + * which messages have not been seen, and which cpu(s) have not seen them. + * + * Returns the number of cpu's that have not responded. + */ +static int +uv_examine_destinations(struct bau_target_nodemask *distribution) +{ + int sender; + int i; + int j; + int k; + int count = 0; + struct bau_control *bau_tablesp; + struct bau_payload_queue_entry *msg; + struct bau_msg_status *msp; + + sender = smp_processor_id(); + for (i = 0; i < (sizeof(struct bau_target_nodemask) * BITSPERBYTE); + i++) { + if (bau_node_isset(i, distribution)) { + bau_tablesp = uv_bau_table_bases[i]; + for (msg = bau_tablesp->va_queue_first, j = 0; + j < DESTINATION_PAYLOAD_QUEUE_SIZE; msg++, j++) { + if ((msg->sending_cpu == sender) && + (!msg->replied_to)) { + msp = bau_tablesp->msg_statuses + j; + printk(KERN_DEBUG + "blade %d: address:%#lx %d of %d, not cpu(s): ", + i, msg->address, + msg->acknowledge_count, + msg->number_of_cpus); + for (k = 0; k < msg->number_of_cpus; + k++) { + if (!((long)1 << k & msp-> + seen_by.bits)) { + count++; + printk("%d ", k); + } + } + printk("\n"); + } + } + } + } + return count; +} + +/** + * uv_flush_tlb_others - globally purge translation cache of a virtual + * address or all TLB's + * @cpumaskp: mask of all cpu's in which the address is to be removed + * @mm: mm_struct containing virtual address range + * @va: virtual address to be removed (or TLB_FLUSH_ALL for all TLB's on cpu) + * + * This is the entry point for initiating any UV global TLB shootdown. + * + * Purges the translation caches of all specified processors of the given + * virtual address, or purges all TLB's on specified processors. + * + * The caller has derived the cpumaskp from the mm_struct and has subtracted + * the local cpu from the mask. This function is called only if there + * are bits set in the mask. (e.g. flush_tlb_page()) + * + * The cpumaskp is converted into a nodemask of the nodes containing + * the cpus. + */ +int +uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm, unsigned long va) +{ + int i; + int blade; + int cpu; + int bit; + int right_shift; + int this_blade; + int exams = 0; + int tries = 0; + long source_timeouts = 0; + long destination_timeouts = 0; + unsigned long index; + unsigned long mmr_offset; + unsigned long descriptor_status; + struct bau_activation_descriptor *bau_desc; + ktime_t time1, time2; + + cpu = uv_blade_processor_id(); + this_blade = uv_numa_blade_id(); + bau_desc = __get_cpu_var(bau_control).descriptor_base; + bau_desc += (UV_ITEMS_PER_DESCRIPTOR * cpu); + + bau_nodes_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE); + + i = 0; + for_each_cpu_mask(bit, *cpumaskp) { + blade = uv_cpu_to_blade_id(bit); + if (blade > (UV_DISTRIBUTION_SIZE - 1)) + BUG(); + if (blade == this_blade) + continue; + bau_node_set(blade, &bau_desc->distribution); + /* leave the bits for the remote cpu's in the mask until + success; on failure we fall back to the IPI method */ + i++; + } + if (i == 0) + goto none_to_flush; + __get_cpu_var(ptcstats).requestor++; + __get_cpu_var(ptcstats).ntargeted += i; + + bau_desc->payload.address = va; + bau_desc->payload.sending_cpu = smp_processor_id(); + + if (cpu < UV_CPUS_PER_ACT_STATUS) { + mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0; + right_shift = cpu * UV_ACT_STATUS_SIZE; + } else { + mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_1; + right_shift = + ((cpu - UV_CPUS_PER_ACT_STATUS) * UV_ACT_STATUS_SIZE); + } + time1 = ktime_get(); + +retry: + tries++; + index = ((unsigned long) + 1 << UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT) | cpu; + uv_write_local_mmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index); + + while ((descriptor_status = (((unsigned long) + uv_read_local_mmr(mmr_offset) >> + right_shift) & UV_ACT_STATUS_MASK)) != + DESC_STATUS_IDLE) { + if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) { + source_timeouts++; + if (source_timeouts > SOURCE_TIMEOUT_LIMIT) + source_timeouts = 0; + __get_cpu_var(ptcstats).s_retry++; + goto retry; + } + /* spin here looking for progress at the destinations */ + if (descriptor_status == DESC_STATUS_DESTINATION_TIMEOUT) { + destination_timeouts++; + if (destination_timeouts > DESTINATION_TIMEOUT_LIMIT) { + /* returns # of cpus not responding */ + if (uv_examine_destinations + (&bau_desc->distribution) == 0) { + __get_cpu_var(ptcstats).d_retry++; + goto retry; + } + exams++; + if (exams >= uv_bau_retry_limit) { + printk(KERN_DEBUG + "uv_flush_tlb_others"); + printk("giving up on cpu %d\n", + smp_processor_id()); + goto unsuccessful; + } + /* delays can hang up the simulator + udelay(1000); + */ + destination_timeouts = 0; + } + } + } + if (tries > 1) + __get_cpu_var(ptcstats).retriesok++; + /* on success, clear the remote cpu's from the mask so we don't + use the IPI method of shootdown on them */ + for_each_cpu_mask(bit, *cpumaskp) { + blade = uv_cpu_to_blade_id(bit); + if (blade == this_blade) + continue; + cpu_clear(bit, *cpumaskp); + } + +unsuccessful: + time2 = ktime_get(); + __get_cpu_var(ptcstats).sflush_ns += (time2.tv64 - time1.tv64); + +none_to_flush: + if (cpus_empty(*cpumaskp)) + return 1; + + /* Cause the caller to do an IPI-style TLB shootdown on + the cpu's still in the mask */ + __get_cpu_var(ptcstats).ptc_i++; + return 0; +} + +/* + * The BAU message interrupt comes here. (registered by set_intr_gate) + * See entry_64.S + * + * We received a broadcast assist message. + * + * Interrupts may have been disabled; this interrupt could represent + * the receipt of several messages. + * + * All cores/threads on this node get this interrupt. + * The last one to see it does the s/w ack. + * (the resource will not be freed until noninterruptable cpus see this + * interrupt; hardware will timeout the s/w ack and reply ERROR) + */ +void +uv_bau_message_interrupt(struct pt_regs *regs) +{ + struct bau_payload_queue_entry *pqp; + struct bau_payload_queue_entry *msg; + struct pt_regs *old_regs = set_irq_regs(regs); + ktime_t time1, time2; + int msg_slot; + int sw_ack_slot; + int fw; + int count = 0; + unsigned long local_pnode; + + ack_APIC_irq(); + exit_idle(); + irq_enter(); + + time1 = ktime_get(); + + local_pnode = uv_blade_to_pnode(uv_numa_blade_id()); + + pqp = __get_cpu_var(bau_control).va_queue_first; + msg = __get_cpu_var(bau_control).bau_msg_head; + while (msg->sw_ack_vector) { + count++; + fw = msg->sw_ack_vector; + msg_slot = msg - pqp; + sw_ack_slot = ffs(fw) - 1; + + uv_bau_process_message(msg, msg_slot, sw_ack_slot); + + msg++; + if (msg > __get_cpu_var(bau_control).va_queue_last) + msg = __get_cpu_var(bau_control).va_queue_first; + __get_cpu_var(bau_control).bau_msg_head = msg; + } + if (!count) + __get_cpu_var(ptcstats).nomsg++; + else if (count > 1) + __get_cpu_var(ptcstats).multmsg++; + + time2 = ktime_get(); + __get_cpu_var(ptcstats).dflush_ns += (time2.tv64 - time1.tv64); + + irq_exit(); + set_irq_regs(old_regs); + return; +} + +static void +uv_enable_timeouts(void) +{ + int i; + int blade; + int last_blade; + int pnode; + int cur_cpu = 0; + unsigned long apicid; + + /* better if we had each_online_blade */ + last_blade = -1; + for_each_online_node(i) { + blade = uv_node_to_blade_id(i); + if (blade == last_blade) + continue; + last_blade = blade; + apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); + pnode = uv_blade_to_pnode(blade); + cur_cpu += uv_blade_nr_possible_cpus(i); + } + return; +} + +static void * +uv_ptc_seq_start(struct seq_file *file, loff_t *offset) +{ + if (*offset < num_possible_cpus()) + return offset; + return NULL; +} + +static void * +uv_ptc_seq_next(struct seq_file *file, void *data, loff_t *offset) +{ + (*offset)++; + if (*offset < num_possible_cpus()) + return offset; + return NULL; +} + +static void +uv_ptc_seq_stop(struct seq_file *file, void *data) +{ +} + +/* + * Display the statistics thru /proc + * data points to the cpu number + */ +static int +uv_ptc_seq_show(struct seq_file *file, void *data) +{ + struct ptc_stats *stat; + int cpu; + + cpu = *(loff_t *)data; + + if (!cpu) { + seq_printf(file, + "# cpu requestor requestee one all sretry dretry ptc_i "); + seq_printf(file, + "sw_ack sflush_us dflush_us sok dnomsg dmult starget\n"); + } + if (cpu < num_possible_cpus() && cpu_online(cpu)) { + stat = &per_cpu(ptcstats, cpu); + seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld ", + cpu, stat->requestor, + stat->requestee, stat->onetlb, stat->alltlb, + stat->s_retry, stat->d_retry, stat->ptc_i); + seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n", + uv_read_global_mmr64(uv_blade_to_pnode + (uv_cpu_to_blade_id(cpu)), + UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE), + stat->sflush_ns / 1000, stat->dflush_ns / 1000, + stat->retriesok, stat->nomsg, + stat->multmsg, stat->ntargeted); + } + + return 0; +} + +/* + * 0: display meaning of the statistics + * >0: retry limit + */ +static ssize_t +uv_ptc_proc_write(struct file *file, const char __user *user, + size_t count, loff_t *data) +{ + long newmode; + char optstr[64]; + + if (copy_from_user(optstr, user, count)) + return -EFAULT; + optstr[count - 1] = '\0'; + if (strict_strtoul(optstr, 10, &newmode) < 0) { + printk(KERN_DEBUG "%s is invalid\n", optstr); + return -EINVAL; + } + + if (newmode == 0) { + printk(KERN_DEBUG "# cpu: cpu number\n"); + printk(KERN_DEBUG + "requestor: times this cpu was the flush requestor\n"); + printk(KERN_DEBUG + "requestee: times this cpu was requested to flush its TLBs\n"); + printk(KERN_DEBUG + "one: times requested to flush a single address\n"); + printk(KERN_DEBUG + "all: times requested to flush all TLB's\n"); + printk(KERN_DEBUG + "sretry: number of retries of source-side timeouts\n"); + printk(KERN_DEBUG + "dretry: number of retries of destination-side timeouts\n"); + printk(KERN_DEBUG + "ptc_i: times UV fell through to IPI-style flushes\n"); + printk(KERN_DEBUG + "sw_ack: image of UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE\n"); + printk(KERN_DEBUG + "sflush_us: microseconds spent in uv_flush_tlb_others()\n"); + printk(KERN_DEBUG + "dflush_us: microseconds spent in handling flush requests\n"); + printk(KERN_DEBUG "sok: successes on retry\n"); + printk(KERN_DEBUG "dnomsg: interrupts with no message\n"); + printk(KERN_DEBUG + "dmult: interrupts with multiple messages\n"); + printk(KERN_DEBUG "starget: nodes targeted\n"); + } else { + uv_bau_retry_limit = newmode; + printk(KERN_DEBUG "timeout retry limit:%d\n", + uv_bau_retry_limit); + } + + return count; +} + +static const struct seq_operations uv_ptc_seq_ops = { + .start = uv_ptc_seq_start, + .next = uv_ptc_seq_next, + .stop = uv_ptc_seq_stop, + .show = uv_ptc_seq_show +}; + +static int +uv_ptc_proc_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &uv_ptc_seq_ops); +} + +static const struct file_operations proc_uv_ptc_operations = { + .open = uv_ptc_proc_open, + .read = seq_read, + .write = uv_ptc_proc_write, + .llseek = seq_lseek, + .release = seq_release, +}; + +static struct proc_dir_entry *proc_uv_ptc; + +static int __init +uv_ptc_init(void) +{ + static struct proc_dir_entry *sgi_proc_dir; + + sgi_proc_dir = NULL; + + if (!is_uv_system()) + return 0; + + sgi_proc_dir = proc_mkdir("sgi_uv", NULL); + if (!sgi_proc_dir) + return -EINVAL; + + proc_uv_ptc = create_proc_entry(UV_PTC_BASENAME, 0444, NULL); + if (!proc_uv_ptc) { + printk(KERN_ERR "unable to create %s proc entry\n", + UV_PTC_BASENAME); + return -EINVAL; + } + proc_uv_ptc->proc_fops = &proc_uv_ptc_operations; + return 0; +} + +static void __exit +uv_ptc_exit(void) +{ + remove_proc_entry(UV_PTC_BASENAME, NULL); +} + +module_init(uv_ptc_init); +module_exit(uv_ptc_exit); + +/* + * Initialization of BAU-related structures + */ +int __init +uv_bau_init(void) +{ + int i; + int j; + int blade; + int nblades; + int *ip; + int pnode; + int last_blade; + int cur_cpu = 0; + unsigned long pa; + unsigned long n; + unsigned long m; + unsigned long mmr_image; + unsigned long apicid; + char *cp; + struct bau_control *bau_tablesp; + struct bau_activation_descriptor *adp, *ad2; + struct bau_payload_queue_entry *pqp; + struct bau_msg_status *msp; + struct bau_control *bcp; + + if (!is_uv_system()) + return 0; + + uv_bau_retry_limit = 1; + + if ((sizeof(struct bau_local_cpumask) * BITSPERBYTE) < + MAX_CPUS_PER_NODE) { + printk(KERN_ERR + "uv_bau_init: bau_local_cpumask.bits too small\n"); + BUG(); + } + + uv_nshift = uv_hub_info->n_val; + uv_mmask = ((unsigned long)1 << uv_hub_info->n_val) - 1; + nblades = 0; + last_blade = -1; + for_each_online_node(i) { + blade = uv_node_to_blade_id(i); + if (blade == last_blade) + continue; + last_blade = blade; + nblades++; + } + + uv_bau_table_bases = (struct bau_control **) + kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL); + if (!uv_bau_table_bases) + BUG(); + + /* better if we had each_online_blade */ + last_blade = -1; + for_each_online_node(i) { + blade = uv_node_to_blade_id(i); + if (blade == last_blade) + continue; + last_blade = blade; + + bau_tablesp = + kmalloc_node(sizeof(struct bau_control), GFP_KERNEL, i); + if (!bau_tablesp) + BUG(); + + bau_tablesp->msg_statuses = + kmalloc_node(sizeof(struct bau_msg_status) * + DESTINATION_PAYLOAD_QUEUE_SIZE, GFP_KERNEL, i); + if (!bau_tablesp->msg_statuses) + BUG(); + for (j = 0, msp = bau_tablesp->msg_statuses; + j < DESTINATION_PAYLOAD_QUEUE_SIZE; j++, msp++) { + bau_cpubits_clear(&msp->seen_by, (int) + uv_blade_nr_possible_cpus(blade)); + } + + bau_tablesp->watching = + kmalloc_node(sizeof(int) * DESTINATION_NUM_RESOURCES, + GFP_KERNEL, i); + if (!bau_tablesp->watching) + BUG(); + for (j = 0, ip = bau_tablesp->watching; + j < DESTINATION_PAYLOAD_QUEUE_SIZE; j++, ip++) { + *ip = 0; + } + + uv_bau_table_bases[i] = bau_tablesp; + + pnode = uv_blade_to_pnode(blade); + + if (sizeof(struct bau_activation_descriptor) != 64) + BUG(); + + adp = (struct bau_activation_descriptor *) + kmalloc_node(16384, GFP_KERNEL, i); + if (!adp) + BUG(); + if ((unsigned long)adp & 0xfff) + BUG(); + pa = __pa((unsigned long)adp); + n = pa >> uv_nshift; + m = pa & uv_mmask; + + mmr_image = uv_read_global_mmr64(pnode, + UVH_LB_BAU_SB_DESCRIPTOR_BASE); + if (mmr_image) + uv_write_global_mmr64(pnode, (unsigned long) + UVH_LB_BAU_SB_DESCRIPTOR_BASE, + (n << UV_DESC_BASE_PNODE_SHIFT | + m)); + for (j = 0, ad2 = adp; j < UV_ACTIVATION_DESCRIPTOR_SIZE; + j++, ad2++) { + memset(ad2, 0, + sizeof(struct bau_activation_descriptor)); + ad2->header.sw_ack_flag = 1; + ad2->header.base_dest_nodeid = + uv_blade_to_pnode(uv_cpu_to_blade_id(0)); + ad2->header.command = UV_NET_ENDPOINT_INTD; + ad2->header.int_both = 1; + /* all others need to be set to zero: + fairness chaining multilevel count replied_to */ + } + + pqp = (struct bau_payload_queue_entry *) + kmalloc_node((DESTINATION_PAYLOAD_QUEUE_SIZE + 1) * + sizeof(struct bau_payload_queue_entry), + GFP_KERNEL, i); + if (!pqp) + BUG(); + if (sizeof(struct bau_payload_queue_entry) != 32) + BUG(); + if ((unsigned long)(&((struct bau_payload_queue_entry *)0)-> + sw_ack_vector) != 15) + BUG(); + + cp = (char *)pqp + 31; + pqp = (struct bau_payload_queue_entry *) + (((unsigned long)cp >> 5) << 5); + bau_tablesp->va_queue_first = pqp; + uv_write_global_mmr64(pnode, + UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, + ((unsigned long)pnode << + UV_PAYLOADQ_PNODE_SHIFT) | + uv_physnodeaddr(pqp)); + uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, + uv_physnodeaddr(pqp)); + bau_tablesp->va_queue_last = + pqp + (DESTINATION_PAYLOAD_QUEUE_SIZE - 1); + uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST, + (unsigned long) + uv_physnodeaddr(bau_tablesp-> + va_queue_last)); + memset(pqp, 0, sizeof(struct bau_payload_queue_entry) * + DESTINATION_PAYLOAD_QUEUE_SIZE); + + /* this initialization can't be in firmware because the + messaging IRQ will be determined by the OS */ + apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); + pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG); + if ((pa & 0xff) != UV_BAU_MESSAGE) { + uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, + ((apicid << 32) | + UV_BAU_MESSAGE)); + } + + for (j = cur_cpu; j < (cur_cpu + uv_blade_nr_possible_cpus(i)); + j++) { + bcp = (struct bau_control *)&per_cpu(bau_control, j); + bcp->bau_msg_head = bau_tablesp->va_queue_first; + bcp->va_queue_first = bau_tablesp->va_queue_first; + + bcp->va_queue_last = bau_tablesp->va_queue_last; + bcp->watching = bau_tablesp->watching; + bcp->msg_statuses = bau_tablesp->msg_statuses; + bcp->descriptor_base = adp; + } + cur_cpu += uv_blade_nr_possible_cpus(i); + } + + set_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1); + + uv_enable_timeouts(); + + return 0; +} + +__initcall(uv_bau_init); diff --git a/include/asm-x86/uv/uv_bau.h b/include/asm-x86/uv/uv_bau.h new file mode 100644 index 000000000000..f125f86c89ac --- /dev/null +++ b/include/asm-x86/uv/uv_bau.h @@ -0,0 +1,331 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * SGI UV Broadcast Assist Unit definitions + * + * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved. + */ + +#ifndef __ASM_X86_UV_BAU__ +#define __ASM_X86_UV_BAU__ + +#include +#define BITSPERBYTE 8 + +/* Broadcast Assist Unit messaging structures */ + +/* + * Selective Broadcast activations are induced by software action + * specifying a particular 8-descriptor "set" via a 6-bit index written + * to an MMR. + * Thus there are 64 unique 512-byte sets of SB descriptors - one set for + * each 6-bit index value. These descriptor sets are mapped in sequence + * starting with set 0 located at the address specified in the + * BAU_SB_DESCRIPTOR_BASE register, set 1 is located at BASE + 512, + * set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on. + * + * We will use 31 sets, one for sending BAU messages from each of the 32 + * cpu's on the node. + * + * TLB shootdown will use the first of the 8 descriptors of each set. + * Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set). + */ + +#define UV_ITEMS_PER_DESCRIPTOR 8 +#define UV_CPUS_PER_ACT_STATUS 32 +#define UV_ACT_STATUS_MASK 0x3 +#define UV_ACT_STATUS_SIZE 2 +#define UV_ACTIVATION_DESCRIPTOR_SIZE 32 +#define UV_DISTRIBUTION_SIZE 256 +#define UV_SW_ACK_NPENDING 8 +#define UV_BAU_MESSAGE 200 /* Messaging irq; see irq_64.h */ + /* and include/asm-x86/hw_irq_64.h */ + /* To be dynamically allocated in the future */ +#define UV_NET_ENDPOINT_INTD 0x38 +#define UV_DESC_BASE_PNODE_SHIFT 49 /* position of pnode (nasid>>1) in MMR */ +#define UV_PAYLOADQ_PNODE_SHIFT 49 + +#define UV_PTC_BASENAME "sgi_uv/ptc_statistics" +#define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask)) + +/* bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1 */ +#define DESC_STATUS_IDLE 0 +#define DESC_STATUS_ACTIVE 1 +#define DESC_STATUS_DESTINATION_TIMEOUT 2 +#define DESC_STATUS_SOURCE_TIMEOUT 3 + +/* source side threshholds at which message retries print a warning */ +#define SOURCE_TIMEOUT_LIMIT 20 +#define DESTINATION_TIMEOUT_LIMIT 20 + +/* number of entries in the destination side payload queue */ +#define DESTINATION_PAYLOAD_QUEUE_SIZE 17 +/* number of destination side software ack resources */ +#define DESTINATION_NUM_RESOURCES 8 +#define MAX_CPUS_PER_NODE 32 + +/* Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor) */ +/* If the 'multilevel' flag in the header portion of the descriptor + * has been set to 0, then endpoint multi-unicast mode is selected. + * The distribution specification (32 bytes) is interpreted as a 256-bit + * distribution vector. Adjacent bits correspond to consecutive even numbered + * nodeIDs. The result of adding the index of a given bit to the 15-bit + * 'base_dest_nodeid' field of the header corresponds to the + * destination nodeID associated with that specified bit. */ +struct bau_target_nodemask { + unsigned long bits[BITS_TO_LONGS(256)]; +}; + +/* mask of cpu's on a node */ +/* (during initialization we need to check that unsigned long has + enough bits for max. cpu's per node) */ +struct bau_local_cpumask { + unsigned long bits; +}; + +/* + * Payload: 16 bytes (128 bits) (bytes 0x20-0x2f of descriptor) + * only 12 bytes (96 bits) of the payload area are usable. + * An additional 3 bytes (bits 27:4) of the header address are carried + * to the next bytes of the destination payload queue. + * And an additional 2 bytes of the header Suppl_A field are also + * carried to the destination payload queue. + * But the first byte of the Suppl_A becomes bits 127:120 (the 16th byte) + * of the destination payload queue, which is written by the hardware + * with the s/w ack resource bit vector. + * [ effective message contents (16 bytes (128 bits) maximum), not counting + * the s/w ack bit vector ] + */ + +/* The payload is software-defined for INTD transactions */ +struct bau_msg_payload { + unsigned long address; /* signifies a page or all TLB's + of the cpu */ + /* 64 bits */ + unsigned short sending_cpu; /* filled in by sender */ + /* 16 bits */ + unsigned short acknowledge_count;/* filled in by destination */ + /* 16 bits */ + unsigned int reserved1:32; /* not usable */ +}; + + +/* Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor) */ +/* see table 4.2.3.0.1 in broacast_assist spec. */ +struct bau_msg_header { + int dest_subnodeid:6; /* must be zero */ + /* bits 5:0 */ + int base_dest_nodeid:15; /* nasid>>1 (pnode) of first bit in node_map */ + /* bits 20:6 */ + int command:8; /* message type */ + /* bits 28:21 */ + /* 0x38: SN3net EndPoint Message */ + int rsvd_1:3; /* must be zero */ + /* bits 31:29 */ + /* int will align on 32 bits */ + int rsvd_2:9; /* must be zero */ + /* bits 40:32 */ + /* Suppl_A is 56-41 */ + int payload_2a:8; /* becomes byte 16 of msg */ + /* bits 48:41 */ /* not currently using */ + int payload_2b:8; /* becomes byte 17 of msg */ + /* bits 56:49 */ /* not currently using */ + /* Address field (96:57) is never used as an + address (these are address bits 42:3) */ + int rsvd_3:1; /* must be zero */ + /* bit 57 */ + /* address bits 27:4 are payload */ + /* these 24 bits become bytes 12-14 of msg */ + int replied_to:1; /* sent as 0 by the source to byte 12 */ + /* bit 58 */ + + int payload_1a:5; /* not currently used */ + /* bits 63:59 */ + int payload_1b:8; /* not currently used */ + /* bits 71:64 */ + int payload_1c:8; /* not currently used */ + /* bits 79:72 */ + int payload_1d:2; /* not currently used */ + /* bits 81:80 */ + + int rsvd_4:7; /* must be zero */ + /* bits 88:82 */ + int sw_ack_flag:1; /* software acknowledge flag */ + /* bit 89 */ + /* INTD trasactions at destination are to + wait for software acknowledge */ + int rsvd_5:6; /* must be zero */ + /* bits 95:90 */ + int rsvd_6:5; /* must be zero */ + /* bits 100:96 */ + int int_both:1; /* if 1, interrupt both sockets on the blade */ + /* bit 101*/ + int fairness:3; /* usually zero */ + /* bits 104:102 */ + int multilevel:1; /* multi-level multicast format */ + /* bit 105 */ + /* 0 for TLB: endpoint multi-unicast messages */ + int chaining:1; /* next descriptor is part of this activation*/ + /* bit 106 */ + int rsvd_7:21; /* must be zero */ + /* bits 127:107 */ +}; + +/* The format of the message to send, plus all accompanying control */ +/* Should be 64 bytes */ +struct bau_activation_descriptor { + struct bau_target_nodemask distribution; + /* message template, consisting of header and payload: */ + struct bau_msg_header header; + struct bau_msg_payload payload; +}; +/* + * -payload-- ---------header------ + * bytes 0-11 bits 41-56 bits 58-81 + * A B (2) C (3) + * + * A/B/C are moved to: + * A C B + * bytes 0-11 bytes 12-14 bytes 16-17 (byte 15 filled in by hw as vector) + * ------------payload queue----------- + */ + +/* + * The payload queue on the destination side is an array of these. + * With BAU_MISC_CONTROL set for software acknowledge mode, the messages + * are 32 bytes (2 micropackets) (256 bits) in length, but contain only 17 + * bytes of usable data, including the sw ack vector in byte 15 (bits 127:120) + * (12 bytes come from bau_msg_payload, 3 from payload_1, 2 from + * sw_ack_vector and payload_2) + * "Enabling Software Acknowledgment mode (see Section 4.3.3 Software + * Acknowledge Processing) also selects 32 byte (17 bytes usable) payload + * operation." + */ +struct bau_payload_queue_entry { + unsigned long address; /* signifies a page or all TLB's + of the cpu */ + /* 64 bits, bytes 0-7 */ + + unsigned short sending_cpu; /* cpu that sent the message */ + /* 16 bits, bytes 8-9 */ + + unsigned short acknowledge_count; /* filled in by destination */ + /* 16 bits, bytes 10-11 */ + + unsigned short replied_to:1; /* sent as 0 by the source */ + /* 1 bit */ + unsigned short unused1:7; /* not currently using */ + /* 7 bits: byte 12) */ + + unsigned char unused2[2]; /* not currently using */ + /* bytes 13-14 */ + + unsigned char sw_ack_vector; /* filled in by the hardware */ + /* byte 15 (bits 127:120) */ + + unsigned char unused4[3]; /* not currently using bytes 17-19 */ + /* bytes 17-19 */ + + int number_of_cpus; /* filled in at destination */ + /* 32 bits, bytes 20-23 (aligned) */ + + unsigned char unused5[8]; /* not using */ + /* bytes 24-31 */ +}; + +/* one for every slot in the destination payload queue */ +struct bau_msg_status { + struct bau_local_cpumask seen_by; /* map of cpu's */ +}; + +/* one for every slot in the destination software ack resources */ +struct bau_sw_ack_status { + struct bau_payload_queue_entry *msg; /* associated message */ + int watcher; /* cpu monitoring, or -1 */ +}; + +/* one on every node and per-cpu; to locate the software tables */ +struct bau_control { + struct bau_activation_descriptor *descriptor_base; + struct bau_payload_queue_entry *bau_msg_head; + struct bau_payload_queue_entry *va_queue_first; + struct bau_payload_queue_entry *va_queue_last; + struct bau_msg_status *msg_statuses; + int *watching; /* pointer to array */ +}; + +/* + * This structure is allocated per_cpu for UV TLB shootdown statistics. + */ +struct ptc_stats { + unsigned long ptc_i; /* number of IPI-style flushes */ + unsigned long requestor; /* number of nodes this cpu sent to */ + unsigned long requestee; /* times cpu was remotely requested */ + unsigned long alltlb; /* times all tlb's on this cpu were flushed */ + unsigned long onetlb; /* times just one tlb on this cpu was flushed */ + unsigned long s_retry; /* retries on source side timeouts */ + unsigned long d_retry; /* retries on destination side timeouts */ + unsigned long sflush_ns;/* nanoseconds spent in uv_flush_tlb_others */ + unsigned long dflush_ns;/* nanoseconds spent destination side */ + unsigned long retriesok; /* successes on retries */ + unsigned long nomsg; /* interrupts with no message */ + unsigned long multmsg; /* interrupts with multiple messages */ + unsigned long ntargeted;/* nodes targeted */ +}; + +static inline int bau_node_isset(int node, struct bau_target_nodemask *dstp) +{ + return constant_test_bit(node, &dstp->bits[0]); +} +static inline void bau_node_set(int node, struct bau_target_nodemask *dstp) +{ + __set_bit(node, &dstp->bits[0]); +} +static inline void bau_nodes_clear(struct bau_target_nodemask *dstp, int nbits) +{ + bitmap_zero(&dstp->bits[0], nbits); +} + +static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits) +{ + bitmap_zero(&dstp->bits, nbits); +} + +/* + * atomic increment of a short integer + * (rather than using the __sync_add_and_fetch() intrinsic) + * + * returns the new value of the variable + */ +static inline short int atomic_inc_short(short int *v) +{ + asm volatile("movw $1, %%cx\n" + "lock ; xaddw %%cx, %0\n" + : "+m" (*v) /* outputs */ + : : "%cx", "memory"); /* inputs : clobbereds */ + return *v; +} + +/* + * atomic OR of two long integers + * (rather than using the __sync_or_and_fetch() intrinsic) + */ +static inline void atomic_or_long(unsigned long *v1, unsigned long v2) +{ + asm volatile("movq %0, %%rax; lea %1, %%rdx\n" + "lock ; orq %%rax, %%rdx\n" + : "+m" (*v1) /* outputs */ + : "m" (v1), "m" (v2) /* inputs */ + : "memory"); /* clobbereds */ +} + +#define cpubit_isset(cpu, bau_local_cpumask) \ + test_bit((cpu), (bau_local_cpumask).bits) + +int uv_flush_tlb_others(cpumask_t *, struct mm_struct *, unsigned long); +void uv_bau_message_intr1(void); +void uv_bau_timeout_intr1(void); + +#endif /* __ASM_X86_UV_BAU__ */ -- cgit v1.2.3 From 73e991f45fe7644711c0c9dd357a1a2c6e222707 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Wed, 4 Jun 2008 15:33:17 -0500 Subject: x86 atomic operations: atomic_or_long() atomic_inc_short() Provide atomic operations for increment of a 16-bit integer and logical OR into a 64-bit integer. Signed-off-by: Cliff Wickman Reviewed-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- include/asm-x86/atomic_64.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/include/asm-x86/atomic_64.h b/include/asm-x86/atomic_64.h index 3e0cd7d38335..55c0dd9382b8 100644 --- a/include/asm-x86/atomic_64.h +++ b/include/asm-x86/atomic_64.h @@ -431,6 +431,32 @@ static inline int atomic64_add_unless(atomic64_t *v, long a, long u) return c != (u); } +/** + * atomic_inc_short - increment of a short integer + * @v: pointer to type int + * + * Atomically adds 1 to @v + * Returns the new value of @u + */ +static inline short int atomic_inc_short(short int *v) +{ + asm(LOCK_PREFIX "addw $1, %0" : "+m" (*v)); + return *v; +} + +/** + * atomic_or_long - OR of two long integers + * @v1: pointer to type unsigned long + * @v2: pointer to type unsigned long + * + * Atomically ORs @v1 and @v2 + * Returns the result of the OR + */ +static inline void atomic_or_long(unsigned long *v1, unsigned long v2) +{ + asm(LOCK_PREFIX "orq %1, %0" : "+m" (*v1) : "r" (v2)); +} + #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) /* These are x86-specific, used by some header files */ -- cgit v1.2.3 From b194b120507276b4f09e2e14f941884e777fc7c8 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Thu, 12 Jun 2008 08:23:48 -0500 Subject: SGI UV: TLB shootdown using broadcast assist unit, cleanups TLB shootdown for SGI UV. v1: 6/2 original v2: 6/3 corrections/improvements per Ingo's review v3: 6/4 split atomic operations off to a separate patch (Jeremy's review) v4: 6/12 include rather than (fixes a !SMP build problem that Ingo found) fix the index on uv_table_bases[blade] Signed-off-by: Cliff Wickman Signed-off-by: Ingo Molnar --- arch/x86/kernel/tlb_64.c | 2 +- arch/x86/kernel/tlb_uv.c | 704 ++++++++++++++++++++++++-------------------- include/asm-x86/uv/uv_bau.h | 147 ++++----- 3 files changed, 454 insertions(+), 399 deletions(-) diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c index fc132113bdab..5039d0f097a2 100644 --- a/arch/x86/kernel/tlb_64.c +++ b/arch/x86/kernel/tlb_64.c @@ -165,7 +165,7 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, cpumask_t cpumask = *cpumaskp; if (is_uv_system() && uv_flush_tlb_others(&cpumask, mm, va)) - return; + return; /* Caller has disabled preemption */ sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS; diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index 28e7c68d9d78..f7bc6a6fbe49 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -10,18 +10,20 @@ #include #include -#include #include #include #include #include #include #include +#include -struct bau_control **uv_bau_table_bases; -static int uv_bau_retry_limit; -static int uv_nshift; /* position of pnode (which is nasid>>1) */ -static unsigned long uv_mmask; +#include + +static struct bau_control **uv_bau_table_bases __read_mostly; +static int uv_bau_retry_limit __read_mostly; +static int uv_nshift __read_mostly; /* position of pnode (which is nasid>>1) */ +static unsigned long uv_mmask __read_mostly; char *status_table[] = { "IDLE", @@ -41,19 +43,18 @@ DEFINE_PER_CPU(struct bau_control, bau_control); * clear of the Timeout bit (as well) will free the resource. No reply will * be sent (the hardware will only do one reply per message). */ -static void -uv_reply_to_message(int resource, +static void uv_reply_to_message(int resource, struct bau_payload_queue_entry *msg, struct bau_msg_status *msp) { - int fw; + unsigned long dw; - fw = (1 << (resource + UV_SW_ACK_NPENDING)) | (1 << resource); + dw = (1 << (resource + UV_SW_ACK_NPENDING)) | (1 << resource); msg->replied_to = 1; msg->sw_ack_vector = 0; if (msp) msp->seen_by.bits = 0; - uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, fw); + uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, dw); return; } @@ -61,8 +62,7 @@ uv_reply_to_message(int resource, * Do all the things a cpu should do for a TLB shootdown message. * Other cpu's may come here at the same time for this message. */ -static void -uv_bau_process_message(struct bau_payload_queue_entry *msg, +static void uv_bau_process_message(struct bau_payload_queue_entry *msg, int msg_slot, int sw_ack_slot) { int cpu; @@ -103,8 +103,7 @@ uv_bau_process_message(struct bau_payload_queue_entry *msg, * * Returns the number of cpu's that have not responded. */ -static int -uv_examine_destinations(struct bau_target_nodemask *distribution) +static int uv_examine_destinations(struct bau_target_nodemask *distribution) { int sender; int i; @@ -118,34 +117,161 @@ uv_examine_destinations(struct bau_target_nodemask *distribution) sender = smp_processor_id(); for (i = 0; i < (sizeof(struct bau_target_nodemask) * BITSPERBYTE); i++) { - if (bau_node_isset(i, distribution)) { - bau_tablesp = uv_bau_table_bases[i]; - for (msg = bau_tablesp->va_queue_first, j = 0; - j < DESTINATION_PAYLOAD_QUEUE_SIZE; msg++, j++) { - if ((msg->sending_cpu == sender) && - (!msg->replied_to)) { - msp = bau_tablesp->msg_statuses + j; - printk(KERN_DEBUG + if (!bau_node_isset(i, distribution)) + continue; + bau_tablesp = uv_bau_table_bases[i]; + for (msg = bau_tablesp->va_queue_first, j = 0; + j < DESTINATION_PAYLOAD_QUEUE_SIZE; msg++, j++) { + if ((msg->sending_cpu == sender) && + (!msg->replied_to)) { + msp = bau_tablesp->msg_statuses + j; + printk(KERN_DEBUG "blade %d: address:%#lx %d of %d, not cpu(s): ", - i, msg->address, - msg->acknowledge_count, - msg->number_of_cpus); - for (k = 0; k < msg->number_of_cpus; - k++) { - if (!((long)1 << k & msp-> - seen_by.bits)) { - count++; - printk("%d ", k); - } + i, msg->address, + msg->acknowledge_count, + msg->number_of_cpus); + for (k = 0; k < msg->number_of_cpus; + k++) { + if (!((long)1 << k & msp-> + seen_by.bits)) { + count++; + printk("%d ", k); } - printk("\n"); } + printk("\n"); } } } return count; } +/* + * wait for completion of a broadcast message + * + * return COMPLETE, RETRY or GIVEUP + */ +static int uv_wait_completion(struct bau_activation_descriptor *bau_desc, + unsigned long mmr_offset, int right_shift) +{ + int exams = 0; + long destination_timeouts = 0; + long source_timeouts = 0; + unsigned long descriptor_status; + + while ((descriptor_status = (((unsigned long) + uv_read_local_mmr(mmr_offset) >> + right_shift) & UV_ACT_STATUS_MASK)) != + DESC_STATUS_IDLE) { + if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) { + source_timeouts++; + if (source_timeouts > SOURCE_TIMEOUT_LIMIT) + source_timeouts = 0; + __get_cpu_var(ptcstats).s_retry++; + return FLUSH_RETRY; + } + /* + * spin here looking for progress at the destinations + */ + if (descriptor_status == DESC_STATUS_DESTINATION_TIMEOUT) { + destination_timeouts++; + if (destination_timeouts > DESTINATION_TIMEOUT_LIMIT) { + /* + * returns number of cpus not responding + */ + if (uv_examine_destinations + (&bau_desc->distribution) == 0) { + __get_cpu_var(ptcstats).d_retry++; + return FLUSH_RETRY; + } + exams++; + if (exams >= uv_bau_retry_limit) { + printk(KERN_DEBUG + "uv_flush_tlb_others"); + printk("giving up on cpu %d\n", + smp_processor_id()); + return FLUSH_GIVEUP; + } + /* + * delays can hang the simulator + udelay(1000); + */ + destination_timeouts = 0; + } + } + } + return FLUSH_COMPLETE; +} + +/** + * uv_flush_send_and_wait + * + * Send a broadcast and wait for a broadcast message to complete. + * + * The cpumaskp mask contains the cpus the broadcast was sent to. + * + * Returns 1 if all remote flushing was done. The mask is zeroed. + * Returns 0 if some remote flushing remains to be done. The mask is left + * unchanged. + */ +int uv_flush_send_and_wait(int cpu, int this_blade, + struct bau_activation_descriptor *bau_desc, cpumask_t *cpumaskp) +{ + int completion_status = 0; + int right_shift; + int bit; + int blade; + int tries = 0; + unsigned long index; + unsigned long mmr_offset; + cycles_t time1; + cycles_t time2; + + if (cpu < UV_CPUS_PER_ACT_STATUS) { + mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0; + right_shift = cpu * UV_ACT_STATUS_SIZE; + } else { + mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_1; + right_shift = + ((cpu - UV_CPUS_PER_ACT_STATUS) * UV_ACT_STATUS_SIZE); + } + time1 = get_cycles(); + do { + tries++; + index = ((unsigned long) + 1 << UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT) | cpu; + uv_write_local_mmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index); + completion_status = uv_wait_completion(bau_desc, mmr_offset, + right_shift); + } while (completion_status == FLUSH_RETRY); + time2 = get_cycles(); + __get_cpu_var(ptcstats).sflush += (time2 - time1); + if (tries > 1) + __get_cpu_var(ptcstats).retriesok++; + + if (completion_status == FLUSH_GIVEUP) { + /* + * Cause the caller to do an IPI-style TLB shootdown on + * the cpu's, all of which are still in the mask. + */ + __get_cpu_var(ptcstats).ptc_i++; + return 0; + } + + /* + * Success, so clear the remote cpu's from the mask so we don't + * use the IPI method of shootdown on them. + */ + for_each_cpu_mask(bit, *cpumaskp) { + blade = uv_cpu_to_blade_id(bit); + if (blade == this_blade) + continue; + cpu_clear(bit, *cpumaskp); + } + if (!cpus_empty(*cpumaskp)) + return 0; + return 1; +} + /** * uv_flush_tlb_others - globally purge translation cache of a virtual * address or all TLB's @@ -164,30 +290,25 @@ uv_examine_destinations(struct bau_target_nodemask *distribution) * * The cpumaskp is converted into a nodemask of the nodes containing * the cpus. + * + * Returns 1 if all remote flushing was done. + * Returns 0 if some remote flushing remains to be done. */ -int -uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm, unsigned long va) +int uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm, + unsigned long va) { int i; + int bit; int blade; int cpu; - int bit; - int right_shift; int this_blade; - int exams = 0; - int tries = 0; - long source_timeouts = 0; - long destination_timeouts = 0; - unsigned long index; - unsigned long mmr_offset; - unsigned long descriptor_status; + int locals = 0; struct bau_activation_descriptor *bau_desc; - ktime_t time1, time2; cpu = uv_blade_processor_id(); this_blade = uv_numa_blade_id(); bau_desc = __get_cpu_var(bau_control).descriptor_base; - bau_desc += (UV_ITEMS_PER_DESCRIPTOR * cpu); + bau_desc += UV_ITEMS_PER_DESCRIPTOR * cpu; bau_nodes_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE); @@ -196,96 +317,29 @@ uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm, unsigned long va) blade = uv_cpu_to_blade_id(bit); if (blade > (UV_DISTRIBUTION_SIZE - 1)) BUG(); - if (blade == this_blade) + if (blade == this_blade) { + locals++; continue; + } bau_node_set(blade, &bau_desc->distribution); - /* leave the bits for the remote cpu's in the mask until - success; on failure we fall back to the IPI method */ i++; } - if (i == 0) - goto none_to_flush; + if (i == 0) { + /* + * no off_node flushing; return status for local node + */ + if (locals) + return 0; + else + return 1; + } __get_cpu_var(ptcstats).requestor++; __get_cpu_var(ptcstats).ntargeted += i; bau_desc->payload.address = va; bau_desc->payload.sending_cpu = smp_processor_id(); - if (cpu < UV_CPUS_PER_ACT_STATUS) { - mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0; - right_shift = cpu * UV_ACT_STATUS_SIZE; - } else { - mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_1; - right_shift = - ((cpu - UV_CPUS_PER_ACT_STATUS) * UV_ACT_STATUS_SIZE); - } - time1 = ktime_get(); - -retry: - tries++; - index = ((unsigned long) - 1 << UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT) | cpu; - uv_write_local_mmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index); - - while ((descriptor_status = (((unsigned long) - uv_read_local_mmr(mmr_offset) >> - right_shift) & UV_ACT_STATUS_MASK)) != - DESC_STATUS_IDLE) { - if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) { - source_timeouts++; - if (source_timeouts > SOURCE_TIMEOUT_LIMIT) - source_timeouts = 0; - __get_cpu_var(ptcstats).s_retry++; - goto retry; - } - /* spin here looking for progress at the destinations */ - if (descriptor_status == DESC_STATUS_DESTINATION_TIMEOUT) { - destination_timeouts++; - if (destination_timeouts > DESTINATION_TIMEOUT_LIMIT) { - /* returns # of cpus not responding */ - if (uv_examine_destinations - (&bau_desc->distribution) == 0) { - __get_cpu_var(ptcstats).d_retry++; - goto retry; - } - exams++; - if (exams >= uv_bau_retry_limit) { - printk(KERN_DEBUG - "uv_flush_tlb_others"); - printk("giving up on cpu %d\n", - smp_processor_id()); - goto unsuccessful; - } - /* delays can hang up the simulator - udelay(1000); - */ - destination_timeouts = 0; - } - } - } - if (tries > 1) - __get_cpu_var(ptcstats).retriesok++; - /* on success, clear the remote cpu's from the mask so we don't - use the IPI method of shootdown on them */ - for_each_cpu_mask(bit, *cpumaskp) { - blade = uv_cpu_to_blade_id(bit); - if (blade == this_blade) - continue; - cpu_clear(bit, *cpumaskp); - } - -unsuccessful: - time2 = ktime_get(); - __get_cpu_var(ptcstats).sflush_ns += (time2.tv64 - time1.tv64); - -none_to_flush: - if (cpus_empty(*cpumaskp)) - return 1; - - /* Cause the caller to do an IPI-style TLB shootdown on - the cpu's still in the mask */ - __get_cpu_var(ptcstats).ptc_i++; - return 0; + return uv_flush_send_and_wait(cpu, this_blade, bau_desc, cpumaskp); } /* @@ -302,13 +356,12 @@ none_to_flush: * (the resource will not be freed until noninterruptable cpus see this * interrupt; hardware will timeout the s/w ack and reply ERROR) */ -void -uv_bau_message_interrupt(struct pt_regs *regs) +void uv_bau_message_interrupt(struct pt_regs *regs) { struct bau_payload_queue_entry *pqp; struct bau_payload_queue_entry *msg; struct pt_regs *old_regs = set_irq_regs(regs); - ktime_t time1, time2; + cycles_t time1, time2; int msg_slot; int sw_ack_slot; int fw; @@ -319,7 +372,7 @@ uv_bau_message_interrupt(struct pt_regs *regs) exit_idle(); irq_enter(); - time1 = ktime_get(); + time1 = get_cycles(); local_pnode = uv_blade_to_pnode(uv_numa_blade_id()); @@ -343,16 +396,15 @@ uv_bau_message_interrupt(struct pt_regs *regs) else if (count > 1) __get_cpu_var(ptcstats).multmsg++; - time2 = ktime_get(); - __get_cpu_var(ptcstats).dflush_ns += (time2.tv64 - time1.tv64); + time2 = get_cycles(); + __get_cpu_var(ptcstats).dflush += (time2 - time1); irq_exit(); set_irq_regs(old_regs); return; } -static void -uv_enable_timeouts(void) +static void uv_enable_timeouts(void) { int i; int blade; @@ -361,7 +413,6 @@ uv_enable_timeouts(void) int cur_cpu = 0; unsigned long apicid; - /* better if we had each_online_blade */ last_blade = -1; for_each_online_node(i) { blade = uv_node_to_blade_id(i); @@ -375,16 +426,14 @@ uv_enable_timeouts(void) return; } -static void * -uv_ptc_seq_start(struct seq_file *file, loff_t *offset) +static void *uv_ptc_seq_start(struct seq_file *file, loff_t *offset) { if (*offset < num_possible_cpus()) return offset; return NULL; } -static void * -uv_ptc_seq_next(struct seq_file *file, void *data, loff_t *offset) +static void *uv_ptc_seq_next(struct seq_file *file, void *data, loff_t *offset) { (*offset)++; if (*offset < num_possible_cpus()) @@ -392,8 +441,7 @@ uv_ptc_seq_next(struct seq_file *file, void *data, loff_t *offset) return NULL; } -static void -uv_ptc_seq_stop(struct seq_file *file, void *data) +static void uv_ptc_seq_stop(struct seq_file *file, void *data) { } @@ -401,8 +449,7 @@ uv_ptc_seq_stop(struct seq_file *file, void *data) * Display the statistics thru /proc * data points to the cpu number */ -static int -uv_ptc_seq_show(struct seq_file *file, void *data) +static int uv_ptc_seq_show(struct seq_file *file, void *data) { struct ptc_stats *stat; int cpu; @@ -413,7 +460,7 @@ uv_ptc_seq_show(struct seq_file *file, void *data) seq_printf(file, "# cpu requestor requestee one all sretry dretry ptc_i "); seq_printf(file, - "sw_ack sflush_us dflush_us sok dnomsg dmult starget\n"); + "sw_ack sflush dflush sok dnomsg dmult starget\n"); } if (cpu < num_possible_cpus() && cpu_online(cpu)) { stat = &per_cpu(ptcstats, cpu); @@ -425,7 +472,7 @@ uv_ptc_seq_show(struct seq_file *file, void *data) uv_read_global_mmr64(uv_blade_to_pnode (uv_cpu_to_blade_id(cpu)), UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE), - stat->sflush_ns / 1000, stat->dflush_ns / 1000, + stat->sflush, stat->dflush, stat->retriesok, stat->nomsg, stat->multmsg, stat->ntargeted); } @@ -437,8 +484,7 @@ uv_ptc_seq_show(struct seq_file *file, void *data) * 0: display meaning of the statistics * >0: retry limit */ -static ssize_t -uv_ptc_proc_write(struct file *file, const char __user *user, +static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user, size_t count, loff_t *data) { long newmode; @@ -471,9 +517,9 @@ uv_ptc_proc_write(struct file *file, const char __user *user, printk(KERN_DEBUG "sw_ack: image of UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE\n"); printk(KERN_DEBUG - "sflush_us: microseconds spent in uv_flush_tlb_others()\n"); + "sflush_us: cycles spent in uv_flush_tlb_others()\n"); printk(KERN_DEBUG - "dflush_us: microseconds spent in handling flush requests\n"); + "dflush_us: cycles spent in handling flush requests\n"); printk(KERN_DEBUG "sok: successes on retry\n"); printk(KERN_DEBUG "dnomsg: interrupts with no message\n"); printk(KERN_DEBUG @@ -489,40 +535,33 @@ uv_ptc_proc_write(struct file *file, const char __user *user, } static const struct seq_operations uv_ptc_seq_ops = { - .start = uv_ptc_seq_start, - .next = uv_ptc_seq_next, - .stop = uv_ptc_seq_stop, - .show = uv_ptc_seq_show + .start = uv_ptc_seq_start, + .next = uv_ptc_seq_next, + .stop = uv_ptc_seq_stop, + .show = uv_ptc_seq_show }; -static int -uv_ptc_proc_open(struct inode *inode, struct file *file) +static int uv_ptc_proc_open(struct inode *inode, struct file *file) { return seq_open(file, &uv_ptc_seq_ops); } static const struct file_operations proc_uv_ptc_operations = { - .open = uv_ptc_proc_open, - .read = seq_read, - .write = uv_ptc_proc_write, - .llseek = seq_lseek, - .release = seq_release, + .open = uv_ptc_proc_open, + .read = seq_read, + .write = uv_ptc_proc_write, + .llseek = seq_lseek, + .release = seq_release, }; -static struct proc_dir_entry *proc_uv_ptc; - -static int __init -uv_ptc_init(void) +static int __init uv_ptc_init(void) { - static struct proc_dir_entry *sgi_proc_dir; - - sgi_proc_dir = NULL; + struct proc_dir_entry *proc_uv_ptc; if (!is_uv_system()) return 0; - sgi_proc_dir = proc_mkdir("sgi_uv", NULL); - if (!sgi_proc_dir) + if (!proc_mkdir("sgi_uv", NULL)) return -EINVAL; proc_uv_ptc = create_proc_entry(UV_PTC_BASENAME, 0444, NULL); @@ -535,202 +574,213 @@ uv_ptc_init(void) return 0; } -static void __exit -uv_ptc_exit(void) +/* + * begin the initialization of the per-blade control structures + */ +static struct bau_control * __init uv_table_bases_init(int blade, int node) { - remove_proc_entry(UV_PTC_BASENAME, NULL); + int i; + int *ip; + struct bau_msg_status *msp; + struct bau_control *bau_tablesp; + + bau_tablesp = + kmalloc_node(sizeof(struct bau_control), GFP_KERNEL, node); + if (!bau_tablesp) + BUG(); + bau_tablesp->msg_statuses = + kmalloc_node(sizeof(struct bau_msg_status) * + DESTINATION_PAYLOAD_QUEUE_SIZE, GFP_KERNEL, node); + if (!bau_tablesp->msg_statuses) + BUG(); + for (i = 0, msp = bau_tablesp->msg_statuses; + i < DESTINATION_PAYLOAD_QUEUE_SIZE; i++, msp++) { + bau_cpubits_clear(&msp->seen_by, (int) + uv_blade_nr_possible_cpus(blade)); + } + bau_tablesp->watching = + kmalloc_node(sizeof(int) * DESTINATION_NUM_RESOURCES, + GFP_KERNEL, node); + if (!bau_tablesp->watching) + BUG(); + for (i = 0, ip = bau_tablesp->watching; + i < DESTINATION_PAYLOAD_QUEUE_SIZE; i++, ip++) { + *ip = 0; + } + uv_bau_table_bases[blade] = bau_tablesp; + return bau_tablesp; } -module_init(uv_ptc_init); -module_exit(uv_ptc_exit); +/* + * finish the initialization of the per-blade control structures + */ +static void __init uv_table_bases_finish(int blade, int node, int cur_cpu, + struct bau_control *bau_tablesp, + struct bau_activation_descriptor *adp) +{ + int i; + struct bau_control *bcp; + + for (i = cur_cpu; i < (cur_cpu + uv_blade_nr_possible_cpus(blade)); + i++) { + bcp = (struct bau_control *)&per_cpu(bau_control, i); + bcp->bau_msg_head = bau_tablesp->va_queue_first; + bcp->va_queue_first = bau_tablesp->va_queue_first; + bcp->va_queue_last = bau_tablesp->va_queue_last; + bcp->watching = bau_tablesp->watching; + bcp->msg_statuses = bau_tablesp->msg_statuses; + bcp->descriptor_base = adp; + } +} /* - * Initialization of BAU-related structures + * initialize the sending side's sending buffers */ -int __init -uv_bau_init(void) +static struct bau_activation_descriptor * __init +uv_activation_descriptor_init(int node, int pnode) { int i; - int j; - int blade; - int nblades; - int *ip; - int pnode; - int last_blade; - int cur_cpu = 0; unsigned long pa; - unsigned long n; unsigned long m; + unsigned long n; unsigned long mmr_image; - unsigned long apicid; + struct bau_activation_descriptor *adp; + struct bau_activation_descriptor *ad2; + + adp = (struct bau_activation_descriptor *) + kmalloc_node(16384, GFP_KERNEL, node); + if (!adp) + BUG(); + pa = __pa((unsigned long)adp); + n = pa >> uv_nshift; + m = pa & uv_mmask; + mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE); + if (mmr_image) + uv_write_global_mmr64(pnode, (unsigned long) + UVH_LB_BAU_SB_DESCRIPTOR_BASE, + (n << UV_DESC_BASE_PNODE_SHIFT | m)); + for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) { + memset(ad2, 0, sizeof(struct bau_activation_descriptor)); + ad2->header.sw_ack_flag = 1; + ad2->header.base_dest_nodeid = + uv_blade_to_pnode(uv_cpu_to_blade_id(0)); + ad2->header.command = UV_NET_ENDPOINT_INTD; + ad2->header.int_both = 1; + /* + * all others need to be set to zero: + * fairness chaining multilevel count replied_to + */ + } + return adp; +} + +/* + * initialize the destination side's receiving buffers + */ +static struct bau_payload_queue_entry * __init uv_payload_queue_init(int node, + int pnode, struct bau_control *bau_tablesp) +{ char *cp; - struct bau_control *bau_tablesp; - struct bau_activation_descriptor *adp, *ad2; struct bau_payload_queue_entry *pqp; - struct bau_msg_status *msp; - struct bau_control *bcp; - if (!is_uv_system()) - return 0; + pqp = (struct bau_payload_queue_entry *) + kmalloc_node((DESTINATION_PAYLOAD_QUEUE_SIZE + 1) * + sizeof(struct bau_payload_queue_entry), + GFP_KERNEL, node); + if (!pqp) + BUG(); + cp = (char *)pqp + 31; + pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5); + bau_tablesp->va_queue_first = pqp; + uv_write_global_mmr64(pnode, + UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, + ((unsigned long)pnode << + UV_PAYLOADQ_PNODE_SHIFT) | + uv_physnodeaddr(pqp)); + uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, + uv_physnodeaddr(pqp)); + bau_tablesp->va_queue_last = + pqp + (DESTINATION_PAYLOAD_QUEUE_SIZE - 1); + uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST, + (unsigned long) + uv_physnodeaddr(bau_tablesp->va_queue_last)); + memset(pqp, 0, sizeof(struct bau_payload_queue_entry) * + DESTINATION_PAYLOAD_QUEUE_SIZE); + return pqp; +} - uv_bau_retry_limit = 1; +/* + * Initialization of each UV blade's structures + */ +static int __init uv_init_blade(int blade, int node, int cur_cpu) +{ + int pnode; + unsigned long pa; + unsigned long apicid; + struct bau_activation_descriptor *adp; + struct bau_payload_queue_entry *pqp; + struct bau_control *bau_tablesp; - if ((sizeof(struct bau_local_cpumask) * BITSPERBYTE) < - MAX_CPUS_PER_NODE) { - printk(KERN_ERR - "uv_bau_init: bau_local_cpumask.bits too small\n"); - BUG(); + bau_tablesp = uv_table_bases_init(blade, node); + pnode = uv_blade_to_pnode(blade); + adp = uv_activation_descriptor_init(node, pnode); + pqp = uv_payload_queue_init(node, pnode, bau_tablesp); + uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp); + /* + * the below initialization can't be in firmware because the + * messaging IRQ will be determined by the OS + */ + apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); + pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG); + if ((pa & 0xff) != UV_BAU_MESSAGE) { + uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, + ((apicid << 32) | UV_BAU_MESSAGE)); } + return 0; +} + +/* + * Initialization of BAU-related structures + */ +static int __init uv_bau_init(void) +{ + int blade; + int node; + int nblades; + int last_blade; + int cur_cpu = 0; + + if (!is_uv_system()) + return 0; + uv_bau_retry_limit = 1; uv_nshift = uv_hub_info->n_val; uv_mmask = ((unsigned long)1 << uv_hub_info->n_val) - 1; nblades = 0; last_blade = -1; - for_each_online_node(i) { - blade = uv_node_to_blade_id(i); + for_each_online_node(node) { + blade = uv_node_to_blade_id(node); if (blade == last_blade) continue; last_blade = blade; nblades++; } - uv_bau_table_bases = (struct bau_control **) kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL); if (!uv_bau_table_bases) BUG(); - - /* better if we had each_online_blade */ last_blade = -1; - for_each_online_node(i) { - blade = uv_node_to_blade_id(i); + for_each_online_node(node) { + blade = uv_node_to_blade_id(node); if (blade == last_blade) continue; last_blade = blade; - - bau_tablesp = - kmalloc_node(sizeof(struct bau_control), GFP_KERNEL, i); - if (!bau_tablesp) - BUG(); - - bau_tablesp->msg_statuses = - kmalloc_node(sizeof(struct bau_msg_status) * - DESTINATION_PAYLOAD_QUEUE_SIZE, GFP_KERNEL, i); - if (!bau_tablesp->msg_statuses) - BUG(); - for (j = 0, msp = bau_tablesp->msg_statuses; - j < DESTINATION_PAYLOAD_QUEUE_SIZE; j++, msp++) { - bau_cpubits_clear(&msp->seen_by, (int) - uv_blade_nr_possible_cpus(blade)); - } - - bau_tablesp->watching = - kmalloc_node(sizeof(int) * DESTINATION_NUM_RESOURCES, - GFP_KERNEL, i); - if (!bau_tablesp->watching) - BUG(); - for (j = 0, ip = bau_tablesp->watching; - j < DESTINATION_PAYLOAD_QUEUE_SIZE; j++, ip++) { - *ip = 0; - } - - uv_bau_table_bases[i] = bau_tablesp; - - pnode = uv_blade_to_pnode(blade); - - if (sizeof(struct bau_activation_descriptor) != 64) - BUG(); - - adp = (struct bau_activation_descriptor *) - kmalloc_node(16384, GFP_KERNEL, i); - if (!adp) - BUG(); - if ((unsigned long)adp & 0xfff) - BUG(); - pa = __pa((unsigned long)adp); - n = pa >> uv_nshift; - m = pa & uv_mmask; - - mmr_image = uv_read_global_mmr64(pnode, - UVH_LB_BAU_SB_DESCRIPTOR_BASE); - if (mmr_image) - uv_write_global_mmr64(pnode, (unsigned long) - UVH_LB_BAU_SB_DESCRIPTOR_BASE, - (n << UV_DESC_BASE_PNODE_SHIFT | - m)); - for (j = 0, ad2 = adp; j < UV_ACTIVATION_DESCRIPTOR_SIZE; - j++, ad2++) { - memset(ad2, 0, - sizeof(struct bau_activation_descriptor)); - ad2->header.sw_ack_flag = 1; - ad2->header.base_dest_nodeid = - uv_blade_to_pnode(uv_cpu_to_blade_id(0)); - ad2->header.command = UV_NET_ENDPOINT_INTD; - ad2->header.int_both = 1; - /* all others need to be set to zero: - fairness chaining multilevel count replied_to */ - } - - pqp = (struct bau_payload_queue_entry *) - kmalloc_node((DESTINATION_PAYLOAD_QUEUE_SIZE + 1) * - sizeof(struct bau_payload_queue_entry), - GFP_KERNEL, i); - if (!pqp) - BUG(); - if (sizeof(struct bau_payload_queue_entry) != 32) - BUG(); - if ((unsigned long)(&((struct bau_payload_queue_entry *)0)-> - sw_ack_vector) != 15) - BUG(); - - cp = (char *)pqp + 31; - pqp = (struct bau_payload_queue_entry *) - (((unsigned long)cp >> 5) << 5); - bau_tablesp->va_queue_first = pqp; - uv_write_global_mmr64(pnode, - UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, - ((unsigned long)pnode << - UV_PAYLOADQ_PNODE_SHIFT) | - uv_physnodeaddr(pqp)); - uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, - uv_physnodeaddr(pqp)); - bau_tablesp->va_queue_last = - pqp + (DESTINATION_PAYLOAD_QUEUE_SIZE - 1); - uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST, - (unsigned long) - uv_physnodeaddr(bau_tablesp-> - va_queue_last)); - memset(pqp, 0, sizeof(struct bau_payload_queue_entry) * - DESTINATION_PAYLOAD_QUEUE_SIZE); - - /* this initialization can't be in firmware because the - messaging IRQ will be determined by the OS */ - apicid = per_cpu(x86_cpu_to_apicid, cur_cpu); - pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG); - if ((pa & 0xff) != UV_BAU_MESSAGE) { - uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, - ((apicid << 32) | - UV_BAU_MESSAGE)); - } - - for (j = cur_cpu; j < (cur_cpu + uv_blade_nr_possible_cpus(i)); - j++) { - bcp = (struct bau_control *)&per_cpu(bau_control, j); - bcp->bau_msg_head = bau_tablesp->va_queue_first; - bcp->va_queue_first = bau_tablesp->va_queue_first; - - bcp->va_queue_last = bau_tablesp->va_queue_last; - bcp->watching = bau_tablesp->watching; - bcp->msg_statuses = bau_tablesp->msg_statuses; - bcp->descriptor_base = adp; - } - cur_cpu += uv_blade_nr_possible_cpus(i); + uv_init_blade(blade, node, cur_cpu); + cur_cpu += uv_blade_nr_possible_cpus(blade); } - set_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1); - uv_enable_timeouts(); - return 0; } - __initcall(uv_bau_init); +__initcall(uv_ptc_init); diff --git a/include/asm-x86/uv/uv_bau.h b/include/asm-x86/uv/uv_bau.h index f125f86c89ac..e52fec822667 100644 --- a/include/asm-x86/uv/uv_bau.h +++ b/include/asm-x86/uv/uv_bau.h @@ -14,9 +14,9 @@ #include #define BITSPERBYTE 8 -/* Broadcast Assist Unit messaging structures */ - /* + * Broadcast Assist Unit messaging structures + * * Selective Broadcast activations are induced by software action * specifying a particular 8-descriptor "set" via a 6-bit index written * to an MMR. @@ -33,54 +33,73 @@ * Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set). */ -#define UV_ITEMS_PER_DESCRIPTOR 8 -#define UV_CPUS_PER_ACT_STATUS 32 -#define UV_ACT_STATUS_MASK 0x3 -#define UV_ACT_STATUS_SIZE 2 -#define UV_ACTIVATION_DESCRIPTOR_SIZE 32 -#define UV_DISTRIBUTION_SIZE 256 -#define UV_SW_ACK_NPENDING 8 -#define UV_BAU_MESSAGE 200 /* Messaging irq; see irq_64.h */ - /* and include/asm-x86/hw_irq_64.h */ - /* To be dynamically allocated in the future */ -#define UV_NET_ENDPOINT_INTD 0x38 -#define UV_DESC_BASE_PNODE_SHIFT 49 /* position of pnode (nasid>>1) in MMR */ -#define UV_PAYLOADQ_PNODE_SHIFT 49 - -#define UV_PTC_BASENAME "sgi_uv/ptc_statistics" -#define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask)) - -/* bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1 */ +#define UV_ITEMS_PER_DESCRIPTOR 8 +#define UV_CPUS_PER_ACT_STATUS 32 +#define UV_ACT_STATUS_MASK 0x3 +#define UV_ACT_STATUS_SIZE 2 +#define UV_ACTIVATION_DESCRIPTOR_SIZE 32 +#define UV_DISTRIBUTION_SIZE 256 +#define UV_SW_ACK_NPENDING 8 +#define UV_BAU_MESSAGE 200 +/* + * Messaging irq; see irq_64.h and include/asm-x86/hw_irq_64.h + * To be dynamically allocated in the future + */ +#define UV_NET_ENDPOINT_INTD 0x38 +#define UV_DESC_BASE_PNODE_SHIFT 49 +#define UV_PAYLOADQ_PNODE_SHIFT 49 +#define UV_PTC_BASENAME "sgi_uv/ptc_statistics" +#define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask)) + +/* + * bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1 + */ #define DESC_STATUS_IDLE 0 #define DESC_STATUS_ACTIVE 1 #define DESC_STATUS_DESTINATION_TIMEOUT 2 #define DESC_STATUS_SOURCE_TIMEOUT 3 -/* source side threshholds at which message retries print a warning */ +/* + * source side threshholds at which message retries print a warning + */ #define SOURCE_TIMEOUT_LIMIT 20 #define DESTINATION_TIMEOUT_LIMIT 20 -/* number of entries in the destination side payload queue */ +/* + * number of entries in the destination side payload queue + */ #define DESTINATION_PAYLOAD_QUEUE_SIZE 17 -/* number of destination side software ack resources */ +/* + * number of destination side software ack resources + */ #define DESTINATION_NUM_RESOURCES 8 #define MAX_CPUS_PER_NODE 32 +/* + * completion statuses for sending a TLB flush message + */ +#define FLUSH_RETRY 1 +#define FLUSH_GIVEUP 2 +#define FLUSH_COMPLETE 3 -/* Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor) */ -/* If the 'multilevel' flag in the header portion of the descriptor +/* + * Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor) + * If the 'multilevel' flag in the header portion of the descriptor * has been set to 0, then endpoint multi-unicast mode is selected. * The distribution specification (32 bytes) is interpreted as a 256-bit * distribution vector. Adjacent bits correspond to consecutive even numbered * nodeIDs. The result of adding the index of a given bit to the 15-bit * 'base_dest_nodeid' field of the header corresponds to the - * destination nodeID associated with that specified bit. */ + * destination nodeID associated with that specified bit. + */ struct bau_target_nodemask { unsigned long bits[BITS_TO_LONGS(256)]; }; -/* mask of cpu's on a node */ -/* (during initialization we need to check that unsigned long has - enough bits for max. cpu's per node) */ +/* + * mask of cpu's on a node + * (during initialization we need to check that unsigned long has + * enough bits for max. cpu's per node) + */ struct bau_local_cpumask { unsigned long bits; }; @@ -99,7 +118,9 @@ struct bau_local_cpumask { * the s/w ack bit vector ] */ -/* The payload is software-defined for INTD transactions */ +/* + * The payload is software-defined for INTD transactions + */ struct bau_msg_payload { unsigned long address; /* signifies a page or all TLB's of the cpu */ @@ -112,8 +133,10 @@ struct bau_msg_payload { }; -/* Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor) */ -/* see table 4.2.3.0.1 in broacast_assist spec. */ +/* + * Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor) + * see table 4.2.3.0.1 in broacast_assist spec. + */ struct bau_msg_header { int dest_subnodeid:6; /* must be zero */ /* bits 5:0 */ @@ -173,11 +196,15 @@ struct bau_msg_header { /* bits 127:107 */ }; -/* The format of the message to send, plus all accompanying control */ -/* Should be 64 bytes */ +/* + * The format of the message to send, plus all accompanying control + * Should be 64 bytes + */ struct bau_activation_descriptor { struct bau_target_nodemask distribution; - /* message template, consisting of header and payload: */ + /* + * message template, consisting of header and payload: + */ struct bau_msg_header header; struct bau_msg_payload payload; }; @@ -235,18 +262,24 @@ struct bau_payload_queue_entry { /* bytes 24-31 */ }; -/* one for every slot in the destination payload queue */ +/* + * one for every slot in the destination payload queue + */ struct bau_msg_status { struct bau_local_cpumask seen_by; /* map of cpu's */ }; -/* one for every slot in the destination software ack resources */ +/* + * one for every slot in the destination software ack resources + */ struct bau_sw_ack_status { struct bau_payload_queue_entry *msg; /* associated message */ int watcher; /* cpu monitoring, or -1 */ }; -/* one on every node and per-cpu; to locate the software tables */ +/* + * one on every node and per-cpu; to locate the software tables + */ struct bau_control { struct bau_activation_descriptor *descriptor_base; struct bau_payload_queue_entry *bau_msg_head; @@ -267,8 +300,8 @@ struct ptc_stats { unsigned long onetlb; /* times just one tlb on this cpu was flushed */ unsigned long s_retry; /* retries on source side timeouts */ unsigned long d_retry; /* retries on destination side timeouts */ - unsigned long sflush_ns;/* nanoseconds spent in uv_flush_tlb_others */ - unsigned long dflush_ns;/* nanoseconds spent destination side */ + unsigned long sflush; /* cycles spent in uv_flush_tlb_others */ + unsigned long dflush; /* cycles spent on destination side */ unsigned long retriesok; /* successes on retries */ unsigned long nomsg; /* interrupts with no message */ unsigned long multmsg; /* interrupts with multiple messages */ @@ -293,39 +326,11 @@ static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits) bitmap_zero(&dstp->bits, nbits); } -/* - * atomic increment of a short integer - * (rather than using the __sync_add_and_fetch() intrinsic) - * - * returns the new value of the variable - */ -static inline short int atomic_inc_short(short int *v) -{ - asm volatile("movw $1, %%cx\n" - "lock ; xaddw %%cx, %0\n" - : "+m" (*v) /* outputs */ - : : "%cx", "memory"); /* inputs : clobbereds */ - return *v; -} - -/* - * atomic OR of two long integers - * (rather than using the __sync_or_and_fetch() intrinsic) - */ -static inline void atomic_or_long(unsigned long *v1, unsigned long v2) -{ - asm volatile("movq %0, %%rax; lea %1, %%rdx\n" - "lock ; orq %%rax, %%rdx\n" - : "+m" (*v1) /* outputs */ - : "m" (v1), "m" (v2) /* inputs */ - : "memory"); /* clobbereds */ -} - #define cpubit_isset(cpu, bau_local_cpumask) \ test_bit((cpu), (bau_local_cpumask).bits) -int uv_flush_tlb_others(cpumask_t *, struct mm_struct *, unsigned long); -void uv_bau_message_intr1(void); -void uv_bau_timeout_intr1(void); +extern int uv_flush_tlb_others(cpumask_t *, struct mm_struct *, unsigned long); +extern void uv_bau_message_intr1(void); +extern void uv_bau_timeout_intr1(void); #endif /* __ASM_X86_UV_BAU__ */ -- cgit v1.2.3 From dc163a41ffba22a6ef70b51e7ddf68aa13b4b414 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 18 Jun 2008 14:15:43 +0200 Subject: SGI UV: TLB shootdown using broadcast assist unit TLB shootdown for SGI UV. v5: 6/12 corrections/improvements per Ingo's second review Signed-off-by: Cliff Wickman Signed-off-by: Ingo Molnar --- arch/x86/kernel/tlb_uv.c | 183 ++++++++++++++++++++------------------------ include/asm-x86/uv/uv_bau.h | 21 ++--- 2 files changed, 96 insertions(+), 108 deletions(-) diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index f7bc6a6fbe49..d8705e97e8d0 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -25,15 +25,8 @@ static int uv_bau_retry_limit __read_mostly; static int uv_nshift __read_mostly; /* position of pnode (which is nasid>>1) */ static unsigned long uv_mmask __read_mostly; -char *status_table[] = { - "IDLE", - "ACTIVE", - "DESTINATION TIMEOUT", - "SOURCE TIMEOUT" -}; - -DEFINE_PER_CPU(struct ptc_stats, ptcstats); -DEFINE_PER_CPU(struct bau_control, bau_control); +static DEFINE_PER_CPU(struct ptc_stats, ptcstats); +static DEFINE_PER_CPU(struct bau_control, bau_control); /* * Free a software acknowledge hardware resource by clearing its Pending @@ -55,7 +48,6 @@ static void uv_reply_to_message(int resource, if (msp) msp->seen_by.bits = 0; uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, dw); - return; } /* @@ -73,7 +65,7 @@ static void uv_bau_process_message(struct bau_payload_queue_entry *msg, cpu = uv_blade_processor_id(); msg->number_of_cpus = uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id())); - this_cpu_mask = (unsigned long)1 << cpu; + this_cpu_mask = 1UL << cpu; if (msp->seen_by.bits & this_cpu_mask) return; atomic_or_long(&msp->seen_by.bits, this_cpu_mask); @@ -94,53 +86,60 @@ static void uv_bau_process_message(struct bau_payload_queue_entry *msg, atomic_inc_short(&msg->acknowledge_count); if (msg->number_of_cpus == msg->acknowledge_count) uv_reply_to_message(sw_ack_slot, msg, msp); - return; } /* - * Examine the payload queue on all the distribution nodes to see + * Examine the payload queue on one distribution node to see * which messages have not been seen, and which cpu(s) have not seen them. * * Returns the number of cpu's that have not responded. */ -static int uv_examine_destinations(struct bau_target_nodemask *distribution) +static int uv_examine_destination(struct bau_control *bau_tablesp, int sender) { - int sender; int i; int j; - int k; int count = 0; - struct bau_control *bau_tablesp; struct bau_payload_queue_entry *msg; struct bau_msg_status *msp; + for (msg = bau_tablesp->va_queue_first, i = 0; i < DEST_Q_SIZE; + msg++, i++) { + if ((msg->sending_cpu == sender) && (!msg->replied_to)) { + msp = bau_tablesp->msg_statuses + i; + printk(KERN_DEBUG + "blade %d: address:%#lx %d of %d, not cpu(s): ", + i, msg->address, msg->acknowledge_count, + msg->number_of_cpus); + for (j = 0; j < msg->number_of_cpus; j++) { + if (!((long)1 << j & msp-> seen_by.bits)) { + count++; + printk("%d ", j); + } + } + printk("\n"); + } + } + return count; +} + +/* + * Examine the payload queue on all the distribution nodes to see + * which messages have not been seen, and which cpu(s) have not seen them. + * + * Returns the number of cpu's that have not responded. + */ +static int uv_examine_destinations(struct bau_target_nodemask *distribution) +{ + int sender; + int i; + int count = 0; + sender = smp_processor_id(); for (i = 0; i < (sizeof(struct bau_target_nodemask) * BITSPERBYTE); i++) { if (!bau_node_isset(i, distribution)) continue; - bau_tablesp = uv_bau_table_bases[i]; - for (msg = bau_tablesp->va_queue_first, j = 0; - j < DESTINATION_PAYLOAD_QUEUE_SIZE; msg++, j++) { - if ((msg->sending_cpu == sender) && - (!msg->replied_to)) { - msp = bau_tablesp->msg_statuses + j; - printk(KERN_DEBUG - "blade %d: address:%#lx %d of %d, not cpu(s): ", - i, msg->address, - msg->acknowledge_count, - msg->number_of_cpus); - for (k = 0; k < msg->number_of_cpus; - k++) { - if (!((long)1 << k & msp-> - seen_by.bits)) { - count++; - printk("%d ", k); - } - } - printk("\n"); - } - } + count += uv_examine_destination(uv_bau_table_bases[i], sender); } return count; } @@ -150,7 +149,7 @@ static int uv_examine_destinations(struct bau_target_nodemask *distribution) * * return COMPLETE, RETRY or GIVEUP */ -static int uv_wait_completion(struct bau_activation_descriptor *bau_desc, +static int uv_wait_completion(struct bau_desc *bau_desc, unsigned long mmr_offset, int right_shift) { int exams = 0; @@ -213,8 +212,8 @@ static int uv_wait_completion(struct bau_activation_descriptor *bau_desc, * Returns 0 if some remote flushing remains to be done. The mask is left * unchanged. */ -int uv_flush_send_and_wait(int cpu, int this_blade, - struct bau_activation_descriptor *bau_desc, cpumask_t *cpumaskp) +int uv_flush_send_and_wait(int cpu, int this_blade, struct bau_desc *bau_desc, + cpumask_t *cpumaskp) { int completion_status = 0; int right_shift; @@ -237,8 +236,8 @@ int uv_flush_send_and_wait(int cpu, int this_blade, time1 = get_cycles(); do { tries++; - index = ((unsigned long) - 1 << UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT) | cpu; + index = (1UL << UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT) | + cpu; uv_write_local_mmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index); completion_status = uv_wait_completion(bau_desc, mmr_offset, right_shift); @@ -303,7 +302,7 @@ int uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm, int cpu; int this_blade; int locals = 0; - struct bau_activation_descriptor *bau_desc; + struct bau_desc *bau_desc; cpu = uv_blade_processor_id(); this_blade = uv_numa_blade_id(); @@ -315,8 +314,7 @@ int uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm, i = 0; for_each_cpu_mask(bit, *cpumaskp) { blade = uv_cpu_to_blade_id(bit); - if (blade > (UV_DISTRIBUTION_SIZE - 1)) - BUG(); + BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1)); if (blade == this_blade) { locals++; continue; @@ -360,6 +358,8 @@ void uv_bau_message_interrupt(struct pt_regs *regs) { struct bau_payload_queue_entry *pqp; struct bau_payload_queue_entry *msg; + struct bau_payload_queue_entry *va_queue_first; + struct bau_payload_queue_entry *va_queue_last; struct pt_regs *old_regs = set_irq_regs(regs); cycles_t time1, time2; int msg_slot; @@ -376,7 +376,8 @@ void uv_bau_message_interrupt(struct pt_regs *regs) local_pnode = uv_blade_to_pnode(uv_numa_blade_id()); - pqp = __get_cpu_var(bau_control).va_queue_first; + pqp = va_queue_first = __get_cpu_var(bau_control).va_queue_first; + va_queue_last = __get_cpu_var(bau_control).va_queue_last; msg = __get_cpu_var(bau_control).bau_msg_head; while (msg->sw_ack_vector) { count++; @@ -387,8 +388,8 @@ void uv_bau_message_interrupt(struct pt_regs *regs) uv_bau_process_message(msg, msg_slot, sw_ack_slot); msg++; - if (msg > __get_cpu_var(bau_control).va_queue_last) - msg = __get_cpu_var(bau_control).va_queue_first; + if (msg > va_queue_last) + msg = va_queue_first; __get_cpu_var(bau_control).bau_msg_head = msg; } if (!count) @@ -401,7 +402,6 @@ void uv_bau_message_interrupt(struct pt_regs *regs) irq_exit(); set_irq_regs(old_regs); - return; } static void uv_enable_timeouts(void) @@ -423,7 +423,6 @@ static void uv_enable_timeouts(void) pnode = uv_blade_to_pnode(blade); cur_cpu += uv_blade_nr_possible_cpus(i); } - return; } static void *uv_ptc_seq_start(struct seq_file *file, loff_t *offset) @@ -535,10 +534,10 @@ static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user, } static const struct seq_operations uv_ptc_seq_ops = { - .start = uv_ptc_seq_start, - .next = uv_ptc_seq_next, - .stop = uv_ptc_seq_stop, - .show = uv_ptc_seq_show + .start = uv_ptc_seq_start, + .next = uv_ptc_seq_next, + .stop = uv_ptc_seq_stop, + .show = uv_ptc_seq_show }; static int uv_ptc_proc_open(struct inode *inode, struct file *file) @@ -568,6 +567,7 @@ static int __init uv_ptc_init(void) if (!proc_uv_ptc) { printk(KERN_ERR "unable to create %s proc entry\n", UV_PTC_BASENAME); + remove_proc_entry("sgi_uv", NULL); return -EINVAL; } proc_uv_ptc->proc_fops = &proc_uv_ptc_operations; @@ -582,33 +582,26 @@ static struct bau_control * __init uv_table_bases_init(int blade, int node) int i; int *ip; struct bau_msg_status *msp; - struct bau_control *bau_tablesp; + struct bau_control *bau_tabp; - bau_tablesp = + bau_tabp = kmalloc_node(sizeof(struct bau_control), GFP_KERNEL, node); - if (!bau_tablesp) - BUG(); - bau_tablesp->msg_statuses = + BUG_ON(!bau_tabp); + bau_tabp->msg_statuses = kmalloc_node(sizeof(struct bau_msg_status) * - DESTINATION_PAYLOAD_QUEUE_SIZE, GFP_KERNEL, node); - if (!bau_tablesp->msg_statuses) - BUG(); - for (i = 0, msp = bau_tablesp->msg_statuses; - i < DESTINATION_PAYLOAD_QUEUE_SIZE; i++, msp++) { + DEST_Q_SIZE, GFP_KERNEL, node); + BUG_ON(!bau_tabp->msg_statuses); + for (i = 0, msp = bau_tabp->msg_statuses; i < DEST_Q_SIZE; i++, msp++) bau_cpubits_clear(&msp->seen_by, (int) uv_blade_nr_possible_cpus(blade)); - } - bau_tablesp->watching = - kmalloc_node(sizeof(int) * DESTINATION_NUM_RESOURCES, - GFP_KERNEL, node); - if (!bau_tablesp->watching) - BUG(); - for (i = 0, ip = bau_tablesp->watching; - i < DESTINATION_PAYLOAD_QUEUE_SIZE; i++, ip++) { + bau_tabp->watching = + kmalloc_node(sizeof(int) * DEST_NUM_RESOURCES, GFP_KERNEL, node); + BUG_ON(!bau_tabp->watching); + for (i = 0, ip = bau_tabp->watching; i < DEST_Q_SIZE; i++, ip++) { *ip = 0; } - uv_bau_table_bases[blade] = bau_tablesp; - return bau_tablesp; + uv_bau_table_bases[blade] = bau_tabp; + return bau_tabsp; } /* @@ -616,7 +609,7 @@ static struct bau_control * __init uv_table_bases_init(int blade, int node) */ static void __init uv_table_bases_finish(int blade, int node, int cur_cpu, struct bau_control *bau_tablesp, - struct bau_activation_descriptor *adp) + struct bau_desc *adp) { int i; struct bau_control *bcp; @@ -636,7 +629,7 @@ static void __init uv_table_bases_finish(int blade, int node, int cur_cpu, /* * initialize the sending side's sending buffers */ -static struct bau_activation_descriptor * __init +static struct bau_desc * __init uv_activation_descriptor_init(int node, int pnode) { int i; @@ -644,13 +637,12 @@ uv_activation_descriptor_init(int node, int pnode) unsigned long m; unsigned long n; unsigned long mmr_image; - struct bau_activation_descriptor *adp; - struct bau_activation_descriptor *ad2; + struct bau_desc *adp; + struct bau_desc *ad2; - adp = (struct bau_activation_descriptor *) + adp = (struct bau_desc *) kmalloc_node(16384, GFP_KERNEL, node); - if (!adp) - BUG(); + BUG_ON(!adp); pa = __pa((unsigned long)adp); n = pa >> uv_nshift; m = pa & uv_mmask; @@ -660,7 +652,7 @@ uv_activation_descriptor_init(int node, int pnode) UVH_LB_BAU_SB_DESCRIPTOR_BASE, (n << UV_DESC_BASE_PNODE_SHIFT | m)); for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) { - memset(ad2, 0, sizeof(struct bau_activation_descriptor)); + memset(ad2, 0, sizeof(struct bau_desc)); ad2->header.sw_ack_flag = 1; ad2->header.base_dest_nodeid = uv_blade_to_pnode(uv_cpu_to_blade_id(0)); @@ -683,12 +675,10 @@ static struct bau_payload_queue_entry * __init uv_payload_queue_init(int node, char *cp; struct bau_payload_queue_entry *pqp; - pqp = (struct bau_payload_queue_entry *) - kmalloc_node((DESTINATION_PAYLOAD_QUEUE_SIZE + 1) * - sizeof(struct bau_payload_queue_entry), - GFP_KERNEL, node); - if (!pqp) - BUG(); + pqp = (struct bau_payload_queue_entry *) kmalloc_node( + (DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry), + GFP_KERNEL, node); + BUG_ON(!pqp); cp = (char *)pqp + 31; pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5); bau_tablesp->va_queue_first = pqp; @@ -699,13 +689,11 @@ static struct bau_payload_queue_entry * __init uv_payload_queue_init(int node, uv_physnodeaddr(pqp)); uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, uv_physnodeaddr(pqp)); - bau_tablesp->va_queue_last = - pqp + (DESTINATION_PAYLOAD_QUEUE_SIZE - 1); + bau_tablesp->va_queue_last = pqp + (DEST_Q_SIZE - 1); uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST, (unsigned long) uv_physnodeaddr(bau_tablesp->va_queue_last)); - memset(pqp, 0, sizeof(struct bau_payload_queue_entry) * - DESTINATION_PAYLOAD_QUEUE_SIZE); + memset(pqp, 0, sizeof(struct bau_payload_queue_entry) * DEST_Q_SIZE); return pqp; } @@ -717,7 +705,7 @@ static int __init uv_init_blade(int blade, int node, int cur_cpu) int pnode; unsigned long pa; unsigned long apicid; - struct bau_activation_descriptor *adp; + struct bau_desc *adp; struct bau_payload_queue_entry *pqp; struct bau_control *bau_tablesp; @@ -755,7 +743,7 @@ static int __init uv_bau_init(void) uv_bau_retry_limit = 1; uv_nshift = uv_hub_info->n_val; - uv_mmask = ((unsigned long)1 << uv_hub_info->n_val) - 1; + uv_mmask = (1UL << uv_hub_info->n_val) - 1; nblades = 0; last_blade = -1; for_each_online_node(node) { @@ -767,8 +755,7 @@ static int __init uv_bau_init(void) } uv_bau_table_bases = (struct bau_control **) kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL); - if (!uv_bau_table_bases) - BUG(); + BUG_ON(!uv_bau_table_bases); last_blade = -1; for_each_online_node(node) { blade = uv_node_to_blade_id(node); diff --git a/include/asm-x86/uv/uv_bau.h b/include/asm-x86/uv/uv_bau.h index e52fec822667..91ac0dfb7588 100644 --- a/include/asm-x86/uv/uv_bau.h +++ b/include/asm-x86/uv/uv_bau.h @@ -54,25 +54,25 @@ /* * bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1 */ -#define DESC_STATUS_IDLE 0 -#define DESC_STATUS_ACTIVE 1 -#define DESC_STATUS_DESTINATION_TIMEOUT 2 -#define DESC_STATUS_SOURCE_TIMEOUT 3 +#define DESC_STATUS_IDLE 0 +#define DESC_STATUS_ACTIVE 1 +#define DESC_STATUS_DESTINATION_TIMEOUT 2 +#define DESC_STATUS_SOURCE_TIMEOUT 3 /* * source side threshholds at which message retries print a warning */ -#define SOURCE_TIMEOUT_LIMIT 20 -#define DESTINATION_TIMEOUT_LIMIT 20 +#define SOURCE_TIMEOUT_LIMIT 20 +#define DESTINATION_TIMEOUT_LIMIT 20 /* * number of entries in the destination side payload queue */ -#define DESTINATION_PAYLOAD_QUEUE_SIZE 17 +#define DEST_Q_SIZE 17 /* * number of destination side software ack resources */ -#define DESTINATION_NUM_RESOURCES 8 +#define DEST_NUM_RESOURCES 8 #define MAX_CPUS_PER_NODE 32 /* * completion statuses for sending a TLB flush message @@ -197,10 +197,11 @@ struct bau_msg_header { }; /* + * The activation descriptor: * The format of the message to send, plus all accompanying control * Should be 64 bytes */ -struct bau_activation_descriptor { +struct bau_desc { struct bau_target_nodemask distribution; /* * message template, consisting of header and payload: @@ -281,7 +282,7 @@ struct bau_sw_ack_status { * one on every node and per-cpu; to locate the software tables */ struct bau_control { - struct bau_activation_descriptor *descriptor_base; + struct bau_desc *descriptor_base; struct bau_payload_queue_entry *bau_msg_head; struct bau_payload_queue_entry *va_queue_first; struct bau_payload_queue_entry *va_queue_last; -- cgit v1.2.3 From b4c286e6af24a116228c8c9f58b9a9eb5b7c000a Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 18 Jun 2008 14:28:19 +0200 Subject: SGI UV: clean up arch/x86/kernel/tlb_uv.c Signed-off-by: Ingo Molnar --- arch/x86/kernel/tlb_uv.c | 107 +++++++++++++++++++++++++++-------------------- 1 file changed, 62 insertions(+), 45 deletions(-) diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index d8705e97e8d0..7bdbf67a2d79 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -11,19 +11,22 @@ #include #include -#include -#include -#include #include +#include #include +#include +#include #include #include -static struct bau_control **uv_bau_table_bases __read_mostly; -static int uv_bau_retry_limit __read_mostly; -static int uv_nshift __read_mostly; /* position of pnode (which is nasid>>1) */ -static unsigned long uv_mmask __read_mostly; +static struct bau_control **uv_bau_table_bases __read_mostly; +static int uv_bau_retry_limit __read_mostly; + +/* position of pnode (which is nasid>>1): */ +static int uv_nshift __read_mostly; + +static unsigned long uv_mmask __read_mostly; static DEFINE_PER_CPU(struct ptc_stats, ptcstats); static DEFINE_PER_CPU(struct bau_control, bau_control); @@ -37,8 +40,8 @@ static DEFINE_PER_CPU(struct bau_control, bau_control); * be sent (the hardware will only do one reply per message). */ static void uv_reply_to_message(int resource, - struct bau_payload_queue_entry *msg, - struct bau_msg_status *msp) + struct bau_payload_queue_entry *msg, + struct bau_msg_status *msp) { unsigned long dw; @@ -55,11 +58,11 @@ static void uv_reply_to_message(int resource, * Other cpu's may come here at the same time for this message. */ static void uv_bau_process_message(struct bau_payload_queue_entry *msg, - int msg_slot, int sw_ack_slot) + int msg_slot, int sw_ack_slot) { - int cpu; unsigned long this_cpu_mask; struct bau_msg_status *msp; + int cpu; msp = __get_cpu_var(bau_control).msg_statuses + msg_slot; cpu = uv_blade_processor_id(); @@ -96,11 +99,11 @@ static void uv_bau_process_message(struct bau_payload_queue_entry *msg, */ static int uv_examine_destination(struct bau_control *bau_tablesp, int sender) { - int i; - int j; - int count = 0; struct bau_payload_queue_entry *msg; struct bau_msg_status *msp; + int count = 0; + int i; + int j; for (msg = bau_tablesp->va_queue_first, i = 0; i < DEST_Q_SIZE; msg++, i++) { @@ -111,7 +114,7 @@ static int uv_examine_destination(struct bau_control *bau_tablesp, int sender) i, msg->address, msg->acknowledge_count, msg->number_of_cpus); for (j = 0; j < msg->number_of_cpus; j++) { - if (!((long)1 << j & msp-> seen_by.bits)) { + if (!((1L << j) & msp->seen_by.bits)) { count++; printk("%d ", j); } @@ -135,8 +138,7 @@ static int uv_examine_destinations(struct bau_target_nodemask *distribution) int count = 0; sender = smp_processor_id(); - for (i = 0; i < (sizeof(struct bau_target_nodemask) * BITSPERBYTE); - i++) { + for (i = 0; i < sizeof(struct bau_target_nodemask) * BITSPERBYTE; i++) { if (!bau_node_isset(i, distribution)) continue; count += uv_examine_destination(uv_bau_table_bases[i], sender); @@ -217,11 +219,11 @@ int uv_flush_send_and_wait(int cpu, int this_blade, struct bau_desc *bau_desc, { int completion_status = 0; int right_shift; - int bit; - int blade; int tries = 0; - unsigned long index; + int blade; + int bit; unsigned long mmr_offset; + unsigned long index; cycles_t time1; cycles_t time2; @@ -294,7 +296,7 @@ int uv_flush_send_and_wait(int cpu, int this_blade, struct bau_desc *bau_desc, * Returns 0 if some remote flushing remains to be done. */ int uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm, - unsigned long va) + unsigned long va) { int i; int bit; @@ -356,12 +358,12 @@ int uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm, */ void uv_bau_message_interrupt(struct pt_regs *regs) { - struct bau_payload_queue_entry *pqp; - struct bau_payload_queue_entry *msg; struct bau_payload_queue_entry *va_queue_first; struct bau_payload_queue_entry *va_queue_last; + struct bau_payload_queue_entry *msg; struct pt_regs *old_regs = set_irq_regs(regs); - cycles_t time1, time2; + cycles_t time1; + cycles_t time2; int msg_slot; int sw_ack_slot; int fw; @@ -376,13 +378,14 @@ void uv_bau_message_interrupt(struct pt_regs *regs) local_pnode = uv_blade_to_pnode(uv_numa_blade_id()); - pqp = va_queue_first = __get_cpu_var(bau_control).va_queue_first; + va_queue_first = __get_cpu_var(bau_control).va_queue_first; va_queue_last = __get_cpu_var(bau_control).va_queue_last; + msg = __get_cpu_var(bau_control).bau_msg_head; while (msg->sw_ack_vector) { count++; fw = msg->sw_ack_vector; - msg_slot = msg - pqp; + msg_slot = msg - va_queue_first; sw_ack_slot = ffs(fw) - 1; uv_bau_process_message(msg, msg_slot, sw_ack_slot); @@ -484,7 +487,7 @@ static int uv_ptc_seq_show(struct seq_file *file, void *data) * >0: retry limit */ static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user, - size_t count, loff_t *data) + size_t count, loff_t *data) { long newmode; char optstr[64]; @@ -587,42 +590,48 @@ static struct bau_control * __init uv_table_bases_init(int blade, int node) bau_tabp = kmalloc_node(sizeof(struct bau_control), GFP_KERNEL, node); BUG_ON(!bau_tabp); + bau_tabp->msg_statuses = kmalloc_node(sizeof(struct bau_msg_status) * DEST_Q_SIZE, GFP_KERNEL, node); BUG_ON(!bau_tabp->msg_statuses); + for (i = 0, msp = bau_tabp->msg_statuses; i < DEST_Q_SIZE; i++, msp++) bau_cpubits_clear(&msp->seen_by, (int) uv_blade_nr_possible_cpus(blade)); + bau_tabp->watching = kmalloc_node(sizeof(int) * DEST_NUM_RESOURCES, GFP_KERNEL, node); BUG_ON(!bau_tabp->watching); - for (i = 0, ip = bau_tabp->watching; i < DEST_Q_SIZE; i++, ip++) { + + for (i = 0, ip = bau_tabp->watching; i < DEST_Q_SIZE; i++, ip++) *ip = 0; - } + uv_bau_table_bases[blade] = bau_tabp; + return bau_tabsp; } /* * finish the initialization of the per-blade control structures */ -static void __init uv_table_bases_finish(int blade, int node, int cur_cpu, - struct bau_control *bau_tablesp, - struct bau_desc *adp) +static void __init +uv_table_bases_finish(int blade, int node, int cur_cpu, + struct bau_control *bau_tablesp, + struct bau_desc *adp) { - int i; struct bau_control *bcp; + int i; - for (i = cur_cpu; i < (cur_cpu + uv_blade_nr_possible_cpus(blade)); - i++) { + for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) { bcp = (struct bau_control *)&per_cpu(bau_control, i); - bcp->bau_msg_head = bau_tablesp->va_queue_first; - bcp->va_queue_first = bau_tablesp->va_queue_first; - bcp->va_queue_last = bau_tablesp->va_queue_last; - bcp->watching = bau_tablesp->watching; - bcp->msg_statuses = bau_tablesp->msg_statuses; - bcp->descriptor_base = adp; + + bcp->bau_msg_head = bau_tablesp->va_queue_first; + bcp->va_queue_first = bau_tablesp->va_queue_first; + bcp->va_queue_last = bau_tablesp->va_queue_last; + bcp->watching = bau_tablesp->watching; + bcp->msg_statuses = bau_tablesp->msg_statuses; + bcp->descriptor_base = adp; } } @@ -643,14 +652,18 @@ uv_activation_descriptor_init(int node, int pnode) adp = (struct bau_desc *) kmalloc_node(16384, GFP_KERNEL, node); BUG_ON(!adp); + pa = __pa((unsigned long)adp); n = pa >> uv_nshift; m = pa & uv_mmask; + mmr_image = uv_read_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE); - if (mmr_image) + if (mmr_image) { uv_write_global_mmr64(pnode, (unsigned long) UVH_LB_BAU_SB_DESCRIPTOR_BASE, (n << UV_DESC_BASE_PNODE_SHIFT | m)); + } + for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) { memset(ad2, 0, sizeof(struct bau_desc)); ad2->header.sw_ack_flag = 1; @@ -669,16 +682,17 @@ uv_activation_descriptor_init(int node, int pnode) /* * initialize the destination side's receiving buffers */ -static struct bau_payload_queue_entry * __init uv_payload_queue_init(int node, - int pnode, struct bau_control *bau_tablesp) +static struct bau_payload_queue_entry * __init +uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) { - char *cp; struct bau_payload_queue_entry *pqp; + char *cp; pqp = (struct bau_payload_queue_entry *) kmalloc_node( (DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry), GFP_KERNEL, node); BUG_ON(!pqp); + cp = (char *)pqp + 31; pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5); bau_tablesp->va_queue_first = pqp; @@ -694,6 +708,7 @@ static struct bau_payload_queue_entry * __init uv_payload_queue_init(int node, (unsigned long) uv_physnodeaddr(bau_tablesp->va_queue_last)); memset(pqp, 0, sizeof(struct bau_payload_queue_entry) * DEST_Q_SIZE); + return pqp; } @@ -756,6 +771,7 @@ static int __init uv_bau_init(void) uv_bau_table_bases = (struct bau_control **) kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL); BUG_ON(!uv_bau_table_bases); + last_blade = -1; for_each_online_node(node) { blade = uv_node_to_blade_id(node); @@ -767,6 +783,7 @@ static int __init uv_bau_init(void) } set_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1); uv_enable_timeouts(); + return 0; } __initcall(uv_bau_init); -- cgit v1.2.3 From d400524affeb84bdfc2b00cd561fbfb8c09dadd7 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 18 Jun 2008 14:51:57 +0200 Subject: SGI UV: TLB shootdown using broadcast assist unit, fix MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix: arch/x86/kernel/tlb_uv.c: In function ‘uv_table_bases_init': arch/x86/kernel/tlb_uv.c:612: error: ‘bau_tabsp' undeclared (first use in this function) arch/x86/kernel/tlb_uv.c:612: error: (Each undeclared identifier is reported only once arch/x86/kernel/tlb_uv.c:612: error: for each function it appears in.) Signed-off-by: Ingo Molnar --- arch/x86/kernel/tlb_uv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index 7bdbf67a2d79..b362913f0199 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -609,7 +609,7 @@ static struct bau_control * __init uv_table_bases_init(int blade, int node) uv_bau_table_bases[blade] = bau_tabp; - return bau_tabsp; + return bau_tabp; } /* -- cgit v1.2.3 From b6df1b8bc1250191cfee15627697111c1cbda53f Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Thu, 19 Jun 2008 21:51:05 -0500 Subject: x86: fix stack overflow for large values of MAX_APICS physid_mask_of_physid() causes a huge stack (12k) to be created if the number of APICS is large. Replace physid_mask_of_physid() with a new function that does not create large stacks. This is a problem only on large x86_64 systems. this paves the way to increase MAX_APICS. Signed-off-by: Jack Steiner Cc: linux-mm@kvack.org Cc: mingo@elte.hu Cc: tglx@linutronix.de Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic_32.c | 2 +- arch/x86/kernel/apic_64.c | 2 +- arch/x86/kernel/smpboot.c | 5 ++--- include/asm-x86/mpspec.h | 7 +++++++ 4 files changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index d5767cb19d56..3f13a1aa07cd 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -1269,7 +1269,7 @@ int __init APIC_init_uniprocessor(void) #ifdef CONFIG_CRASH_DUMP boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); #endif - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); + physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); setup_local_APIC(); diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 0633cfd0dc29..5e22f8d2d507 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -942,7 +942,7 @@ int __init APIC_init_uniprocessor(void) verify_local_APIC(); - phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); + physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid)); setup_local_APIC(); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 3e1cecedde42..664a5db36d40 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1091,10 +1091,9 @@ static __init void disable_smp(void) smpboot_clear_io_apic_irqs(); #endif if (smp_found_config) - phys_cpu_present_map = - physid_mask_of_physid(boot_cpu_physical_apicid); + physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); else - phys_cpu_present_map = physid_mask_of_physid(0); + physid_set_mask_of_physid(0, &phys_cpu_present_map); map_cpu_to_logical_apicid(); cpu_set(0, per_cpu(cpu_sibling_map, 0)); cpu_set(0, per_cpu(cpu_core_map, 0)); diff --git a/include/asm-x86/mpspec.h b/include/asm-x86/mpspec.h index 57a991b9c053..b69e7ba7bf1d 100644 --- a/include/asm-x86/mpspec.h +++ b/include/asm-x86/mpspec.h @@ -101,6 +101,7 @@ typedef struct physid_mask physid_mask_t; __physid_mask; \ }) +/* Note: will create very large stack frames if physid_mask_t is big */ #define physid_mask_of_physid(physid) \ ({ \ physid_mask_t __physid_mask = PHYSID_MASK_NONE; \ @@ -108,6 +109,12 @@ typedef struct physid_mask physid_mask_t; __physid_mask; \ }) +static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map) +{ + physids_clear(*map); + physid_set(physid, *map); +} + #define PHYSID_MASK_ALL { {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} } #define PHYSID_MASK_NONE { {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} } -- cgit v1.2.3 From ab9c0bb8a8c1d71dd303abdaa61ec496128e2fbe Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Mon, 16 Jun 2008 12:09:10 -0500 Subject: x86: increase MAX_APICS for very large x86-64 configs Increase the maximum number of apics when running very large configurations. This patch has no affect on most systems. The patch has no effect on any 32-bit kernel. It adds ~4k to the size of 64-bit kernels but only if NR_CPUS > 255. Signed-off-by: Jack Steiner Signed-off-by: Ingo Molnar --- include/asm-x86/mpspec_def.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/include/asm-x86/mpspec_def.h b/include/asm-x86/mpspec_def.h index dc6ef85e3624..38d1e73b49e4 100644 --- a/include/asm-x86/mpspec_def.h +++ b/include/asm-x86/mpspec_def.h @@ -17,10 +17,11 @@ # define MAX_MPC_ENTRY 1024 # define MAX_APICS 256 #else -/* - * A maximum of 255 APICs with the current APIC ID architecture. - */ -# define MAX_APICS 255 +# if NR_CPUS <= 255 +# define MAX_APICS 255 +# else +# define MAX_APICS 32768 +# endif #endif struct intel_mp_floating { -- cgit v1.2.3 From cef53278682eb2604cbd99de64cdb59a8b35235a Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Thu, 19 Jun 2008 11:16:24 -0500 Subject: x86, SGI UV: TLB shootdown using broadcast assist unit, v6 v6: 6/19 close the security hole in uv_ptc_proc_write()) > Found a potential security hole while doing that: > static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user, > size_t count, loff_t *data) > if (copy_from_user(optstr, user, count)) > return -EFAULT; > > is count guaranteed to never be larger than 64? is fixed below. It adds tlb_uv.o to the Makefile. Signed-off-by: Cliff Wickman Cc: mingo@elte.hu Signed-off-by: Ingo Molnar --- arch/x86/kernel/tlb_uv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index b362913f0199..c503b7f04481 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -492,6 +492,8 @@ static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user, long newmode; char optstr[64]; + if (count > 64) + return -EINVAL; if (copy_from_user(optstr, user, count)) return -EFAULT; optstr[count - 1] = '\0'; -- cgit v1.2.3 From e7eb8726d0e144f0925972c4ecee945e91a42753 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Mon, 23 Jun 2008 08:32:25 -0500 Subject: x86, SGI UV: uv_ptc_proc_write fix Someone could write 0 bytes to /proc/sgi_uv/ptc_statistics, causing optstr[count - 1] = '\0'; to write to who-knows-where. (Andi Kleen noticed this need from a patch I sent for similar code in the ia64 world (sn2_ptc_proc_write()).) (count less than zero is not possible here, as count is unsigned) Signed-off-by: Cliff Wickman Signed-off-by: Ingo Molnar --- arch/x86/kernel/tlb_uv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index c503b7f04481..d0fbb7712ab0 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -492,7 +492,7 @@ static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user, long newmode; char optstr[64]; - if (count > 64) + if (count == 0 || count > sizeof(optstr)) return -EINVAL; if (copy_from_user(optstr, user, count)) return -EFAULT; -- cgit v1.2.3 From 1ecd27657b735128a728ebf0c31fce5e1456718a Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Fri, 20 Jun 2008 15:38:22 +0200 Subject: x86: unify crashkernel reservation for 32 and 64 bit This patch moves the reserve_crashkernel() to setup.c and removes the architecture-specific version. Both versions were more or less the same. I tested it on both x86-64 and i386, with CONFIG_KEXEC on and off (so that it compiles). Signed-off-by: Bernhard Walle Cc: yhlu.kernel@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++ arch/x86/kernel/setup_32.c | 53 ---------------------------------------- arch/x86/kernel/setup_64.c | 40 ------------------------------ include/asm-x86/setup.h | 3 +++ 4 files changed, 64 insertions(+), 93 deletions(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index ebb0a2bcdc08..c5330f601b68 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -3,6 +3,7 @@ #include #include #include +#include #include #include #include @@ -11,6 +12,7 @@ #include #include #include +#include #ifdef CONFIG_X86_LOCAL_APIC unsigned int num_processors; @@ -404,3 +406,62 @@ EXPORT_SYMBOL(node_to_cpumask); #endif /* CONFIG_DEBUG_PER_CPU_MAPS */ #endif /* X86_64_NUMA */ + + +/* + * --------- Crashkernel reservation ------------------------------ + */ + +static inline unsigned long long get_total_mem(void) +{ + unsigned long long total; + + total = max_low_pfn - min_low_pfn; +#ifdef CONFIG_HIGHMEM + total += highend_pfn - highstart_pfn; +#endif + + return total << PAGE_SHIFT; +} + +#ifdef CONFIG_KEXEC +void __init reserve_crashkernel(void) +{ + unsigned long long total_mem; + unsigned long long crash_size, crash_base; + int ret; + + total_mem = get_total_mem(); + + ret = parse_crashkernel(boot_command_line, total_mem, + &crash_size, &crash_base); + if (ret == 0 && crash_size > 0) { + if (crash_base <= 0) { + printk(KERN_INFO "crashkernel reservation failed - " + "you have to specify a base address\n"); + return; + } + + if (reserve_bootmem_generic(crash_base, crash_size, + BOOTMEM_EXCLUSIVE) < 0) { + printk(KERN_INFO "crashkernel reservation failed - " + "memory is in use\n"); + return; + } + + printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " + "for crashkernel (System RAM: %ldMB)\n", + (unsigned long)(crash_size >> 20), + (unsigned long)(crash_base >> 20), + (unsigned long)(total_mem >> 20)); + + crashk_res.start = crash_base; + crashk_res.end = crash_base + crash_size - 1; + insert_resource(&iomem_resource, &crashk_res); + } +} +#else +void __init reserve_crashkernel(void) +{} +#endif + diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index a9b19ad24edb..369d0fe1ff9c 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -429,59 +429,6 @@ extern unsigned long __init setup_memory(void); extern void zone_sizes_init(void); #endif /* !CONFIG_NEED_MULTIPLE_NODES */ -static inline unsigned long long get_total_mem(void) -{ - unsigned long long total; - - total = max_low_pfn - min_low_pfn; -#ifdef CONFIG_HIGHMEM - total += highend_pfn - highstart_pfn; -#endif - - return total << PAGE_SHIFT; -} - -#ifdef CONFIG_KEXEC -static void __init reserve_crashkernel(void) -{ - unsigned long long total_mem; - unsigned long long crash_size, crash_base; - int ret; - - total_mem = get_total_mem(); - - ret = parse_crashkernel(boot_command_line, total_mem, - &crash_size, &crash_base); - if (ret == 0 && crash_size > 0) { - if (crash_base <= 0) { - printk(KERN_INFO "crashkernel reservation failed - " - "you have to specify a base address\n"); - return; - } - - if (reserve_bootmem_generic(crash_base, crash_size, - BOOTMEM_EXCLUSIVE) < 0) { - printk(KERN_INFO "crashkernel reservation failed - " - "memory is in use\n"); - return; - } - - printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " - "for crashkernel (System RAM: %ldMB)\n", - (unsigned long)(crash_size >> 20), - (unsigned long)(crash_base >> 20), - (unsigned long)(total_mem >> 20)); - - crashk_res.start = crash_base; - crashk_res.end = crash_base + crash_size - 1; - insert_resource(&iomem_resource, &crashk_res); - } -} -#else -static inline void __init reserve_crashkernel(void) -{} -#endif - #ifdef CONFIG_BLK_DEV_INITRD static bool do_relocate_initrd = false; diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 16ef53ab538a..504caeaffd58 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -228,46 +228,6 @@ static inline void copy_edd(void) } #endif -#ifdef CONFIG_KEXEC -static void __init reserve_crashkernel(void) -{ - unsigned long long total_mem; - unsigned long long crash_size, crash_base; - int ret; - - total_mem = ((unsigned long long)max_low_pfn - min_low_pfn) << PAGE_SHIFT; - - ret = parse_crashkernel(boot_command_line, total_mem, - &crash_size, &crash_base); - if (ret == 0 && crash_size) { - if (crash_base <= 0) { - printk(KERN_INFO "crashkernel reservation failed - " - "you have to specify a base address\n"); - return; - } - - if (reserve_bootmem_generic(crash_base, crash_size, - BOOTMEM_EXCLUSIVE) < 0) { - printk(KERN_INFO "crashkernel reservation failed - " - "memory is in use\n"); - return; - } - - printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " - "for crashkernel (System RAM: %ldMB)\n", - (unsigned long)(crash_size >> 20), - (unsigned long)(crash_base >> 20), - (unsigned long)(total_mem >> 20)); - crashk_res.start = crash_base; - crashk_res.end = crash_base + crash_size - 1; - insert_resource(&iomem_resource, &crashk_res); - } -} -#else -static inline void __init reserve_crashkernel(void) -{} -#endif - /* * setup_arch - architecture-specific boot-time initializations * diff --git a/include/asm-x86/setup.h b/include/asm-x86/setup.h index e14b6e73d266..b434bdd82ba7 100644 --- a/include/asm-x86/setup.h +++ b/include/asm-x86/setup.h @@ -8,6 +8,9 @@ /* Interrupt control for vSMPowered x86_64 systems */ void vsmp_init(void); +/* Crashkernel reservation */ +void reserve_crashkernel(void); + #ifndef CONFIG_PARAVIRT #define paravirt_post_allocator_init() do {} while (0) #endif -- cgit v1.2.3 From a7bf0bd5e6af7fe69342dabf2a3b721f0163469a Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 28 May 2008 15:02:14 +0100 Subject: build: add __page_aligned_data and __page_aligned_bss Making a variable page-aligned by using __attribute__((section(".data.page_aligned"))) is fragile because if sizeof(variable) is not also a multiple of page size, it leaves variables in the remainder of the section unaligned. This patch introduces two new qualifiers, __page_aligned_data and __page_aligned_bss to set the section *and* the alignment of variables. This makes page-aligned variables more robust because the linker will make sure they're aligned properly. Unfortunately it requires *all* page-aligned data to use these macros... Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup64.c | 2 +- arch/x86/mm/ioremap.c | 3 +-- include/linux/linkage.h | 4 ++++ 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/setup64.c b/arch/x86/kernel/setup64.c index 631ea6cc01d8..fc1a56da8240 100644 --- a/arch/x86/kernel/setup64.c +++ b/arch/x86/kernel/setup64.c @@ -40,7 +40,7 @@ EXPORT_SYMBOL(_cpu_pda); struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; -char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned"))); +char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss; unsigned long __supported_pte_mask __read_mostly = ~0UL; EXPORT_SYMBOL_GPL(__supported_pte_mask); diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 416ea415f5c2..0561fde56a51 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -394,8 +394,7 @@ static int __init early_ioremap_debug_setup(char *str) early_param("early_ioremap_debug", early_ioremap_debug_setup); static __initdata int after_paging_init; -static pte_t bm_pte[PAGE_SIZE/sizeof(pte_t)] - __section(.bss.page_aligned); +static pte_t bm_pte[PAGE_SIZE/sizeof(pte_t)] __page_aligned_bss; static inline pmd_t * __init early_ioremap_pmd(unsigned long addr) { diff --git a/include/linux/linkage.h b/include/linux/linkage.h index 2119610b24f8..9fd1f859021b 100644 --- a/include/linux/linkage.h +++ b/include/linux/linkage.h @@ -1,6 +1,7 @@ #ifndef _LINUX_LINKAGE_H #define _LINUX_LINKAGE_H +#include #include #ifdef __cplusplus @@ -17,6 +18,9 @@ # define asmregparm #endif +#define __page_aligned_data __section(.data.page_aligned) __aligned(PAGE_SIZE) +#define __page_aligned_bss __section(.bss.page_aligned) __aligned(PAGE_SIZE) + /* * This is used by architectures to keep arguments on the stack * untouched by the compiler by keeping them live until the end. -- cgit v1.2.3 From 9cf4f298e29abba25c16679fe7be70898223167e Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Tue, 27 May 2008 18:22:54 -0700 Subject: x86: use stack_start in x86_64 call x86_64's init_rsp stack_start, just as i386 does. Put a zeroed stack segment for consistency. With this, we can eliminate one ugly ifdef in smpboot.c. Signed-off-by: Glauber Costa Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/sleep.c | 2 +- arch/x86/kernel/head_64.S | 5 +++-- arch/x86/kernel/smpboot.c | 7 +------ 3 files changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 36af01f029ed..a81f468ab410 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -86,7 +86,7 @@ int acpi_save_state_mem(void) saved_magic = 0x12345678; #else /* CONFIG_64BIT */ header->trampoline_segment = setup_trampoline() >> 4; - init_rsp = (unsigned long)temp_stack + 4096; + stack_start.sp = temp_stack + 4096; initial_code = (unsigned long)wakeup_long64; saved_magic = 0x123456789abcdef0; #endif /* CONFIG_64BIT */ diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 263b9d14753e..918a2711aff6 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -191,7 +191,7 @@ ENTRY(secondary_startup_64) movq %rax, %cr0 /* Setup a boot time stack */ - movq init_rsp(%rip),%rsp + movq stack_start(%rip),%rsp /* zero EFLAGS after setting rsp */ pushq $0 @@ -252,8 +252,9 @@ ENTRY(secondary_startup_64) .quad x86_64_start_kernel __FINITDATA - ENTRY(init_rsp) + ENTRY(stack_start) .quad init_thread_union+THREAD_SIZE-8 + .word 0 bad_address: jmp bad_address diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index d3ad4e09455b..a71e3cad5470 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -714,11 +714,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip) * target processor state. */ startup_ipi_hook(phys_apicid, (unsigned long) start_secondary, -#ifdef CONFIG_X86_64 - (unsigned long)init_rsp); -#else (unsigned long)stack_start.sp); -#endif /* * Run STARTUP IPI loop. @@ -905,15 +901,14 @@ do_rest: early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); c_idle.idle->thread.ip = (unsigned long) start_secondary; /* Stack for startup_32 can be just as for start_secondary onwards */ - stack_start.sp = (void *) c_idle.idle->thread.sp; irq_ctx_init(cpu); #else cpu_pda(cpu)->pcurrent = c_idle.idle; - init_rsp = c_idle.idle->thread.sp; load_sp0(&per_cpu(init_tss, cpu), &c_idle.idle->thread); initial_code = (unsigned long)start_secondary; clear_tsk_thread_flag(c_idle.idle, TIF_FORK); #endif + stack_start.sp = (void *) c_idle.idle->thread.sp; /* start_ip had better be page-aligned! */ start_ip = setup_trampoline(); -- cgit v1.2.3 From 736f12bff9d9e7b4e895c64f73b190c8383fc2a1 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Tue, 27 May 2008 20:14:51 -0700 Subject: x86: don't use gdt_page openly. There's a macro available for that. Signed-off-by: Glauber Costa Signed-off-by: Ingo Molnar --- arch/x86/kernel/traps_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c index cf37d20b1ba7..dc7c05e5cfe7 100644 --- a/arch/x86/kernel/traps_32.c +++ b/arch/x86/kernel/traps_32.c @@ -1119,7 +1119,7 @@ void do_spurious_interrupt_bug(struct pt_regs *regs, long error_code) unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp) { - struct desc_struct *gdt = __get_cpu_var(gdt_page).gdt; + struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id()); unsigned long base = (kesp - uesp) & -THREAD_SIZE; unsigned long new_kesp = kesp - base; unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT; -- cgit v1.2.3 From a939098afcfa5f81d3474782ec15c6d114e57763 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 28 May 2008 16:19:53 -0700 Subject: x86: move x86_64 gdt closer to i386 i386 and x86_64 used two different schemes for maintaining the gdt. With this patch, x86_64 initial gdt table is defined in a .c file, same way as i386 is now. Also, we call it "gdt_page", and the descriptor, "early_gdt_descr". This way we achieve common naming, which can allow for more code integration. Signed-off-by: Glauber Costa Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_64.S | 48 +++++----------------------------------- arch/x86/kernel/setup64.c | 5 +---- arch/x86/kernel/setup_64.c | 19 ++++++++++++++-- arch/x86/kernel/smpboot.c | 12 +++------- arch/x86/kernel/x8664_ksyms_64.c | 5 ----- include/asm-x86/desc.h | 24 +++++++++----------- include/asm-x86/segment.h | 23 ++++++++++--------- 7 files changed, 48 insertions(+), 88 deletions(-) diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 918a2711aff6..32f5a114d1a2 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -203,7 +203,7 @@ ENTRY(secondary_startup_64) * addresses where we're currently running on. We have to do that here * because in 32bit we couldn't load a 64bit linear address. */ - lgdt cpu_gdt_descr(%rip) + lgdt early_gdt_descr(%rip) /* set up data segments. actually 0 would do too */ movl $__KERNEL_DS,%eax @@ -391,54 +391,16 @@ NEXT_PAGE(level2_spare_pgt) .data .align 16 - .globl cpu_gdt_descr -cpu_gdt_descr: - .word gdt_end-cpu_gdt_table-1 -gdt: - .quad cpu_gdt_table -#ifdef CONFIG_SMP - .rept NR_CPUS-1 - .word 0 - .quad 0 - .endr -#endif + .globl early_gdt_descr +early_gdt_descr: + .word GDT_ENTRIES*8-1 + .quad per_cpu__gdt_page ENTRY(phys_base) /* This must match the first entry in level2_kernel_pgt */ .quad 0x0000000000000000 -/* We need valid kernel segments for data and code in long mode too - * IRET will check the segment types kkeil 2000/10/28 - * Also sysret mandates a special GDT layout - */ - - .section .data.page_aligned, "aw" - .align PAGE_SIZE - -/* The TLS descriptors are currently at a different place compared to i386. - Hopefully nobody expects them at a fixed place (Wine?) */ -ENTRY(cpu_gdt_table) - .quad 0x0000000000000000 /* NULL descriptor */ - .quad 0x00cf9b000000ffff /* __KERNEL32_CS */ - .quad 0x00af9b000000ffff /* __KERNEL_CS */ - .quad 0x00cf93000000ffff /* __KERNEL_DS */ - .quad 0x00cffb000000ffff /* __USER32_CS */ - .quad 0x00cff3000000ffff /* __USER_DS, __USER32_DS */ - .quad 0x00affb000000ffff /* __USER_CS */ - .quad 0x0 /* unused */ - .quad 0,0 /* TSS */ - .quad 0,0 /* LDT */ - .quad 0,0,0 /* three TLS descriptors */ - .quad 0x0000f40000000000 /* node/CPU stored in limit */ -gdt_end: - /* asm/segment.h:GDT_ENTRIES must match this */ - /* This should be a multiple of the cache line size */ - /* GDTs of other CPUs are now dynamically allocated */ - - /* zero the remaining page */ - .fill PAGE_SIZE / 8 - GDT_ENTRIES,8,0 - .section .bss, "aw", @nobits .align L1_CACHE_BYTES ENTRY(idt_table) diff --git a/arch/x86/kernel/setup64.c b/arch/x86/kernel/setup64.c index fc1a56da8240..70ff07186772 100644 --- a/arch/x86/kernel/setup64.c +++ b/arch/x86/kernel/setup64.c @@ -202,11 +202,8 @@ void __cpuinit cpu_init (void) * Initialize the per-CPU GDT with the boot GDT, * and set up the GDT descriptor: */ - if (cpu) - memcpy(get_cpu_gdt_table(cpu), cpu_gdt_table, GDT_SIZE); - cpu_gdt_descr[cpu].size = GDT_SIZE; - load_gdt((const struct desc_ptr *)&cpu_gdt_descr[cpu]); + switch_to_new_gdt(); load_idt((const struct desc_ptr *)&idt_descr); memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8); diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 504caeaffd58..a93300de4da9 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -81,8 +81,6 @@ #define ARCH_SETUP #endif -#include "cpu/cpu.h" - /* * Machine setup.. */ @@ -228,6 +226,23 @@ static inline void copy_edd(void) } #endif +/* Overridden in paravirt.c if CONFIG_PARAVIRT */ +void __attribute__((weak)) __init memory_setup(void) +{ + machine_specific_memory_setup(); +} + +/* Current gdt points %fs at the "master" per-cpu area: after this, + * it's on the real one. */ +void switch_to_new_gdt(void) +{ + struct desc_ptr gdt_descr; + + gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); + gdt_descr.size = GDT_SIZE - 1; + load_gdt(&gdt_descr); +} + /* * setup_arch - architecture-specific boot-time initializations * diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index a71e3cad5470..fe2bd515d6cc 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -849,14 +849,8 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done), }; INIT_WORK(&c_idle.work, do_fork_idle); -#ifdef CONFIG_X86_64 - /* allocate memory for gdts of secondary cpus. Hotplug is considered */ - if (!cpu_gdt_descr[cpu].address && - !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) { - printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu); - return -1; - } +#ifdef CONFIG_X86_64 /* Allocate node local memory for AP pdas */ if (cpu > 0) { boot_error = get_local_pda(cpu); @@ -898,7 +892,6 @@ do_rest: #ifdef CONFIG_X86_32 per_cpu(current_task, cpu) = c_idle.idle; init_gdt(cpu); - early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); c_idle.idle->thread.ip = (unsigned long) start_secondary; /* Stack for startup_32 can be just as for start_secondary onwards */ irq_ctx_init(cpu); @@ -908,6 +901,7 @@ do_rest: initial_code = (unsigned long)start_secondary; clear_tsk_thread_flag(c_idle.idle, TIF_FORK); #endif + early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); stack_start.sp = (void *) c_idle.idle->thread.sp; /* start_ip had better be page-aligned! */ @@ -1252,8 +1246,8 @@ void __init native_smp_prepare_boot_cpu(void) int me = smp_processor_id(); #ifdef CONFIG_X86_32 init_gdt(me); - switch_to_new_gdt(); #endif + switch_to_new_gdt(); /* already set me in cpu_online_map in boot_cpu_init() */ cpu_set(me, cpu_callout_map); per_cpu(cpu_state, me) = CPU_ONLINE; diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c index f6c05d0410fb..2f306a826897 100644 --- a/arch/x86/kernel/x8664_ksyms_64.c +++ b/arch/x86/kernel/x8664_ksyms_64.c @@ -53,8 +53,3 @@ EXPORT_SYMBOL(init_level4_pgt); EXPORT_SYMBOL(load_gs_index); EXPORT_SYMBOL(_proxy_pda); - -#ifdef CONFIG_PARAVIRT -/* Virtualized guests may want to use it */ -EXPORT_SYMBOL_GPL(cpu_gdt_descr); -#endif diff --git a/include/asm-x86/desc.h b/include/asm-x86/desc.h index b3875d4b4fab..07f9f2b17be8 100644 --- a/include/asm-x86/desc.h +++ b/include/asm-x86/desc.h @@ -29,11 +29,17 @@ static inline void fill_ldt(struct desc_struct *desc, extern struct desc_ptr idt_descr; extern gate_desc idt_table[]; +struct gdt_page { + struct desc_struct gdt[GDT_ENTRIES]; +} __attribute__((aligned(PAGE_SIZE))); +DECLARE_PER_CPU(struct gdt_page, gdt_page); + +static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu) +{ + return per_cpu(gdt_page, cpu).gdt; +} + #ifdef CONFIG_X86_64 -extern struct desc_struct cpu_gdt_table[GDT_ENTRIES]; -extern struct desc_ptr cpu_gdt_descr[]; -/* the cpu gdt accessor */ -#define get_cpu_gdt_table(x) ((struct desc_struct *)cpu_gdt_descr[x].address) static inline void pack_gate(gate_desc *gate, unsigned type, unsigned long func, unsigned dpl, unsigned ist, unsigned seg) @@ -51,16 +57,6 @@ static inline void pack_gate(gate_desc *gate, unsigned type, unsigned long func, } #else -struct gdt_page { - struct desc_struct gdt[GDT_ENTRIES]; -} __attribute__((aligned(PAGE_SIZE))); -DECLARE_PER_CPU(struct gdt_page, gdt_page); - -static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu) -{ - return per_cpu(gdt_page, cpu).gdt; -} - static inline void pack_gate(gate_desc *gate, unsigned char type, unsigned long base, unsigned dpl, unsigned flags, unsigned short seg) diff --git a/include/asm-x86/segment.h b/include/asm-x86/segment.h index ed5131dd7d92..dfc8601c0892 100644 --- a/include/asm-x86/segment.h +++ b/include/asm-x86/segment.h @@ -61,18 +61,14 @@ #define GDT_ENTRY_TLS_MAX (GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1) #define GDT_ENTRY_DEFAULT_USER_CS 14 -#define __USER_CS (GDT_ENTRY_DEFAULT_USER_CS * 8 + 3) #define GDT_ENTRY_DEFAULT_USER_DS 15 -#define __USER_DS (GDT_ENTRY_DEFAULT_USER_DS * 8 + 3) #define GDT_ENTRY_KERNEL_BASE 12 #define GDT_ENTRY_KERNEL_CS (GDT_ENTRY_KERNEL_BASE + 0) -#define __KERNEL_CS (GDT_ENTRY_KERNEL_CS * 8) #define GDT_ENTRY_KERNEL_DS (GDT_ENTRY_KERNEL_BASE + 1) -#define __KERNEL_DS (GDT_ENTRY_KERNEL_DS * 8) #define GDT_ENTRY_TSS (GDT_ENTRY_KERNEL_BASE + 4) #define GDT_ENTRY_LDT (GDT_ENTRY_KERNEL_BASE + 5) @@ -139,10 +135,11 @@ #else #include -#define __KERNEL_CS 0x10 -#define __KERNEL_DS 0x18 +#define GDT_ENTRY_KERNEL32_CS 1 +#define GDT_ENTRY_KERNEL_CS 2 +#define GDT_ENTRY_KERNEL_DS 3 -#define __KERNEL32_CS 0x08 +#define __KERNEL32_CS (GDT_ENTRY_KERNEL32_CS * 8) /* * we cannot use the same code segment descriptor for user and kernel @@ -150,10 +147,10 @@ * The segment offset needs to contain a RPL. Grr. -AK * GDT layout to get 64bit syscall right (sysret hardcodes gdt offsets) */ - -#define __USER32_CS 0x23 /* 4*8+3 */ -#define __USER_DS 0x2b /* 5*8+3 */ -#define __USER_CS 0x33 /* 6*8+3 */ +#define GDT_ENTRY_DEFAULT_USER32_CS 4 +#define GDT_ENTRY_DEFAULT_USER_DS 5 +#define GDT_ENTRY_DEFAULT_USER_CS 6 +#define __USER32_CS (GDT_ENTRY_DEFAULT_USER32_CS * 8 + 3) #define __USER32_DS __USER_DS #define GDT_ENTRY_TSS 8 /* needs two entries */ @@ -175,6 +172,10 @@ #endif +#define __KERNEL_CS (GDT_ENTRY_KERNEL_CS * 8) +#define __KERNEL_DS (GDT_ENTRY_KERNEL_DS * 8) +#define __USER_DS (GDT_ENTRY_DEFAULT_USER_DS* 8 + 3) +#define __USER_CS (GDT_ENTRY_DEFAULT_USER_CS* 8 + 3) #ifndef CONFIG_PARAVIRT #define get_kernel_rpl() 0 #endif -- cgit v1.2.3 From e3f77edfc1d0beb7b10f9f31d9e39206f7dbef7b Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 28 May 2008 12:57:02 -0300 Subject: x86: use initial_code for i386 x86_64 jumps to whatever is written in "initial_code" symbol, instead of a fixed address. Do it for i386 too. It will allow us to integrate more of the smp boot code. Signed-off-by: Glauber Costa Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_32.S | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index b98b338aae1a..ffb73a5b609f 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -455,7 +455,10 @@ is386: movl $2,%ecx # set MP jmp initialize_secondary # all other CPUs call initialize_secondary 1: #endif /* CONFIG_SMP */ - jmp i386_start_kernel + jmp *(initial_code) +.align 4 +ENTRY(initial_code) + .long i386_start_kernel /* * We depend on ET to be correct. This checks for 287/387. -- cgit v1.2.3 From 3e9704739daf46a8ba6593d749c67b5f7cd633d2 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 28 May 2008 13:01:54 -0300 Subject: x86: boot secondary cpus through initial_code remove "initialize_secondary". Boot both architectures via initial_code. Signed-off-by: Glauber Costa Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_32.S | 2 +- arch/x86/kernel/smpboot.c | 25 +------------------------ 2 files changed, 2 insertions(+), 25 deletions(-) diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index ffb73a5b609f..f67e93441caf 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -452,7 +452,7 @@ is386: movl $2,%ecx # set MP je 1f movl $(__KERNEL_PERCPU), %eax movl %eax,%fs # set this cpu's percpu - jmp initialize_secondary # all other CPUs call initialize_secondary + movl (stack_start), %esp 1: #endif /* CONFIG_SMP */ jmp *(initial_code) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index fe2bd515d6cc..2a0d39f3f2f1 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -349,28 +349,6 @@ static void __cpuinit start_secondary(void *unused) cpu_idle(); } -#ifdef CONFIG_X86_32 -/* - * Everything has been set up for the secondary - * CPUs - they just need to reload everything - * from the task structure - * This function must not return. - */ -void __devinit initialize_secondary(void) -{ - /* - * We don't actually need to load the full TSS, - * basically just the stack pointer and the ip. - */ - - asm volatile( - "movl %0,%%esp\n\t" - "jmp *%1" - : - :"m" (current->thread.sp), "m" (current->thread.ip)); -} -#endif - static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c) { #ifdef CONFIG_X86_32 @@ -892,16 +870,15 @@ do_rest: #ifdef CONFIG_X86_32 per_cpu(current_task, cpu) = c_idle.idle; init_gdt(cpu); - c_idle.idle->thread.ip = (unsigned long) start_secondary; /* Stack for startup_32 can be just as for start_secondary onwards */ irq_ctx_init(cpu); #else cpu_pda(cpu)->pcurrent = c_idle.idle; load_sp0(&per_cpu(init_tss, cpu), &c_idle.idle->thread); - initial_code = (unsigned long)start_secondary; clear_tsk_thread_flag(c_idle.idle, TIF_FORK); #endif early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); + initial_code = (unsigned long)start_secondary; stack_start.sp = (void *) c_idle.idle->thread.sp; /* start_ip had better be page-aligned! */ -- cgit v1.2.3 From 0f385d1ddd0952e01a968bfa5512378ad23de6df Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 28 May 2008 17:09:53 -0700 Subject: x86: clearing io_apic harmless for x86_64 so remove ifdef. Signed-off-by: Glauber Costa Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 2a0d39f3f2f1..a74a261c5626 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1052,9 +1052,8 @@ static __init void disable_smp(void) { cpu_present_map = cpumask_of_cpu(0); cpu_possible_map = cpumask_of_cpu(0); -#ifdef CONFIG_X86_32 smpboot_clear_io_apic_irqs(); -#endif + if (smp_found_config) physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); else -- cgit v1.2.3 From 86e430edf462e872ecfab28d6b8619be5ab9c300 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 28 May 2008 20:05:46 -0700 Subject: x86: remove ifdef from stepping The stepping won't affect x86_64, since there are not x86_64 k7's or pentiums. So, although it adds to the binary size, remove the ifdef for smoother integration Signed-off-by: Glauber Costa Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index a74a261c5626..6f9a31a18811 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -351,7 +351,6 @@ static void __cpuinit start_secondary(void *unused) static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c) { -#ifdef CONFIG_X86_32 /* * Mask B, Pentium, but not Pentium MMX */ @@ -401,7 +400,6 @@ static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c) valid_k7: ; -#endif } static void __cpuinit smp_checks(void) -- cgit v1.2.3 From 3fde690011a84e19f98f77bfaa349b2119ddd2d2 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 28 May 2008 20:34:19 -0700 Subject: x86: change __setup_vector_irq with setup_vector_irq We create a version of it for i386, and then take the CONFIG_X86_64 ifdef out of the game. We could create a __setup_vector_irq for i386, but it would incur in an unnecessary lock taking. Moreover, it is better practice to only export setup_vector_irq anyway. Signed-off-by: Glauber Costa Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 5 +++++ arch/x86/kernel/io_apic_64.c | 9 ++++++++- arch/x86/kernel/smpboot.c | 11 ++--------- include/asm-x86/hw_irq.h | 2 +- 4 files changed, 16 insertions(+), 11 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index fedb3b113ace..d6af301c822b 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -1207,6 +1207,11 @@ static int assign_irq_vector(int irq) return vector; } + +void setup_vector_irq(int cpu) +{ +} + static struct irq_chip ioapic_chip; #define IOAPIC_AUTO -1 diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 2eba4f4c14ba..08c48750888a 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -801,7 +801,7 @@ static void __clear_irq_vector(int irq) cpus_clear(cfg->domain); } -void __setup_vector_irq(int cpu) +static void __setup_vector_irq(int cpu) { /* Initialize vector_irq on a new cpu */ /* This function must be called with vector_lock held */ @@ -824,6 +824,13 @@ void __setup_vector_irq(int cpu) } } +void setup_vector_irq(int cpu) +{ + spin_lock(&vector_lock); + __setup_vector_irq(smp_processor_id()); + spin_unlock(&vector_lock); +} + static struct irq_chip ioapic_chip; diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 6f9a31a18811..e09f3124738a 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -329,15 +329,8 @@ static void __cpuinit start_secondary(void *unused) * smp_call_function(). */ lock_ipi_call_lock(); -#ifdef CONFIG_X86_64 - spin_lock(&vector_lock); - - /* Setup the per cpu irq handling data structures */ - __setup_vector_irq(smp_processor_id()); - /* - * Allow the master to continue. - */ - spin_unlock(&vector_lock); +#ifdef CONFIG_X86_IO_APIC + setup_vector_irq(smp_processor_id()); #endif cpu_set(smp_processor_id(), cpu_online_map); unlock_ipi_call_lock(); diff --git a/include/asm-x86/hw_irq.h b/include/asm-x86/hw_irq.h index 1428b41dcbb9..18f067c310f7 100644 --- a/include/asm-x86/hw_irq.h +++ b/include/asm-x86/hw_irq.h @@ -97,9 +97,9 @@ extern void (*const interrupt[NR_IRQS])(void); #else typedef int vector_irq_t[NR_VECTORS]; DECLARE_PER_CPU(vector_irq_t, vector_irq); -extern void __setup_vector_irq(int cpu); extern spinlock_t vector_lock; #endif +extern void setup_vector_irq(int cpu); #endif /* !ASSEMBLY_ */ -- cgit v1.2.3 From b5841765a2e735a38612c4e4a82170c33d701b3c Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 28 May 2008 13:38:28 -0300 Subject: x86: provide connect_bsp_APIC for x86_64 Although it is not really needed, we provide it to get closer to i386. ifdefs around it are removed in smpboot.c Signed-off-by: Glauber Costa Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic_64.c | 10 ++++++++++ arch/x86/kernel/smpboot.c | 5 +---- 2 files changed, 11 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index d9d663ffa641..5279dc924381 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -918,6 +918,8 @@ int __init APIC_init_uniprocessor(void) verify_local_APIC(); + connect_bsp_APIC(); + physid_set_mask_of_physid(boot_cpu_physical_apicid, &phys_cpu_present_map); apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid)); @@ -999,6 +1001,14 @@ asmlinkage void smp_error_interrupt(void) irq_exit(); } +/** + * * connect_bsp_APIC - attach the APIC to the interrupt system + * */ +void __init connect_bsp_APIC(void) +{ + enable_apic_mode(); +} + void disconnect_bsp_APIC(int virt_wire_setup) { /* Go back to Virtual Wire compatibility mode */ diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index e09f3124738a..a569f06d789e 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1116,9 +1116,7 @@ static int __init smp_sanity_check(unsigned max_cpus) localise_nmi_watchdog(); -#ifdef CONFIG_X86_32 connect_bsp_APIC(); -#endif setup_local_APIC(); end_local_APIC_setup(); return -1; @@ -1173,9 +1171,8 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) } preempt_enable(); -#ifdef CONFIG_X86_32 connect_bsp_APIC(); -#endif + /* * Switch from PIC to APIC mode. */ -- cgit v1.2.3 From 78e622705c69da9649ba87071d8de85054b62df8 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 4 Jun 2008 02:03:07 -0300 Subject: x86: change naming to match x86_64 Change unmap_cpu_to_logical_apicid to numa_remove_cpu. Besides being shorter, it is the same name x86_64 uses. We can save an ifdef in the code this way. Signed-off-by: Glauber Costa Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index a569f06d789e..b99c386af77d 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -181,13 +181,12 @@ static void map_cpu_to_logical_apicid(void) map_cpu_to_node(cpu, node); } -static void unmap_cpu_to_logical_apicid(int cpu) +static void numa_remove_cpu(int cpu) { cpu_2_logical_apicid[cpu] = BAD_APICID; unmap_cpu_to_node(cpu); } #else -#define unmap_cpu_to_logical_apicid(cpu) do {} while (0) #define map_cpu_to_logical_apicid() do {} while (0) #endif @@ -946,10 +945,7 @@ restore_state: if (boot_error) { /* Try to put things back the way they were before ... */ - unmap_cpu_to_logical_apicid(cpu); -#ifdef CONFIG_X86_64 numa_remove_cpu(cpu); /* was set by numa_add_cpu */ -#endif cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */ cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */ cpu_clear(cpu, cpu_present_map); @@ -1244,7 +1240,7 @@ void cpu_exit_clear(void) cpu_clear(cpu, cpu_callout_map); cpu_clear(cpu, cpu_callin_map); - unmap_cpu_to_logical_apicid(cpu); + numa_remove_cpu(cpu); } # endif /* CONFIG_X86_32 */ -- cgit v1.2.3 From b553a1e0ff48bd66fd18f705370e47c0b4ecea61 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 4 Jun 2008 02:05:03 -0300 Subject: x86: remove cpu from maps during cpu disable, take cpus out of all maps in i386, instead of just the online map. Signed-off-by: Glauber Costa Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index b99c386af77d..820c23dbe761 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1319,13 +1319,11 @@ __init void prefill_possible_map(void) static void __ref remove_cpu_from_maps(int cpu) { cpu_clear(cpu, cpu_online_map); -#ifdef CONFIG_X86_64 cpu_clear(cpu, cpu_callout_map); cpu_clear(cpu, cpu_callin_map); /* was set by cpu_init() */ clear_bit(cpu, (unsigned long *)&cpu_initialized); numa_remove_cpu(cpu); -#endif } int __cpu_disable(void) -- cgit v1.2.3 From 1481a3dd42c21ac4a8b9497cb9f5df816d6b064f Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 4 Jun 2008 15:35:03 -0300 Subject: x86: move cpu_exit_clear to process_32.c Take it out of smpboot.c, and move it to process_32.c, closer to its only user. Signed-off-by: Glauber Costa Signed-off-by: Ingo Molnar --- arch/x86/kernel/process_32.c | 16 ++++++++++++++++ arch/x86/kernel/smpboot.c | 19 +------------------ include/asm-x86/numa_32.h | 1 + include/asm-x86/smp.h | 1 - 4 files changed, 18 insertions(+), 19 deletions(-) diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index c2a11d77b1b5..9a139f6c9df3 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -74,6 +74,22 @@ unsigned long thread_saved_pc(struct task_struct *tsk) #ifdef CONFIG_HOTPLUG_CPU #include + +static void cpu_exit_clear(void) +{ + int cpu = raw_smp_processor_id(); + + idle_task_exit(); + + cpu_uninit(); + irq_ctx_exit(cpu); + + cpu_clear(cpu, cpu_callout_map); + cpu_clear(cpu, cpu_callin_map); + + numa_remove_cpu(cpu); +} + /* We don't actually take CPU down, just spin without interrupts. */ static inline void play_dead(void) { diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 820c23dbe761..67af727f733a 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -181,7 +181,7 @@ static void map_cpu_to_logical_apicid(void) map_cpu_to_node(cpu, node); } -static void numa_remove_cpu(int cpu) +void numa_remove_cpu(int cpu) { cpu_2_logical_apicid[cpu] = BAD_APICID; unmap_cpu_to_node(cpu); @@ -1227,23 +1227,6 @@ void __init native_smp_cpus_done(unsigned int max_cpus) #ifdef CONFIG_HOTPLUG_CPU -# ifdef CONFIG_X86_32 -void cpu_exit_clear(void) -{ - int cpu = raw_smp_processor_id(); - - idle_task_exit(); - - cpu_uninit(); - irq_ctx_exit(cpu); - - cpu_clear(cpu, cpu_callout_map); - cpu_clear(cpu, cpu_callin_map); - - numa_remove_cpu(cpu); -} -# endif /* CONFIG_X86_32 */ - static void remove_siblinginfo(int cpu) { int sibling; diff --git a/include/asm-x86/numa_32.h b/include/asm-x86/numa_32.h index a02674f64869..ed6c88eac848 100644 --- a/include/asm-x86/numa_32.h +++ b/include/asm-x86/numa_32.h @@ -2,6 +2,7 @@ #define _ASM_X86_32_NUMA_H 1 extern int pxm_to_nid(int pxm); +extern void numa_remove_cpu(int cpu); #ifdef CONFIG_NUMA extern void __init remap_numa_kva(void); diff --git a/include/asm-x86/smp.h b/include/asm-x86/smp.h index fc1007321ef6..fad45f6a193f 100644 --- a/include/asm-x86/smp.h +++ b/include/asm-x86/smp.h @@ -188,7 +188,6 @@ static inline int hard_smp_processor_id(void) #endif /* CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_HOTPLUG_CPU -extern void cpu_exit_clear(void); extern void cpu_uninit(void); #endif -- cgit v1.2.3 From 7f6cbc905ee22c457e0dcd0bba9d4affbc290a6f Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 4 Jun 2008 23:05:39 -0700 Subject: x86: take load_sp0 out of smpboot.c there's no particular reason to do load_sp0 in different places for i386 and x86_64. They should all be in cpu_init. Right now, cpu_init itself is not integrated, but with this patch, the code becomes closer to each other, making in easier to integrate when the time comes. Furthermore, although doing it in do_boot_cpu for x86_64 is fine, since it's only a copy, load_sp0 should be executed in the cpu it refers to anyway. Signed-off-by: Glauber Costa Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup64.c | 1 + arch/x86/kernel/smpboot.c | 1 - 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/setup64.c b/arch/x86/kernel/setup64.c index 70ff07186772..151d3155ddf6 100644 --- a/arch/x86/kernel/setup64.c +++ b/arch/x86/kernel/setup64.c @@ -247,6 +247,7 @@ void __cpuinit cpu_init (void) BUG(); enter_lazy_tlb(&init_mm, me); + load_sp0(t, ¤t->thread); set_tss_desc(cpu, t); load_TR_desc(); load_LDT(&init_mm.context); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 67af727f733a..3b48d1f4c7c3 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -864,7 +864,6 @@ do_rest: irq_ctx_init(cpu); #else cpu_pda(cpu)->pcurrent = c_idle.idle; - load_sp0(&per_cpu(init_tss, cpu), &c_idle.idle->thread); clear_tsk_thread_flag(c_idle.idle, TIF_FORK); #endif early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); -- cgit v1.2.3 From 1ea598c29748a559a0086a84a016886d786e6272 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 13 Jun 2008 20:31:54 +0200 Subject: x86: fix sleep.c build error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix: arch/x86/kernel/acpi/sleep.c: In function ‘acpi_save_state_mem': arch/x86/kernel/acpi/sleep.c:75: error: ‘stack_start' undeclared (first use in this function) arch/x86/kernel/acpi/sleep.c:75: error: (Each undeclared identifier is reported only once arch/x86/kernel/acpi/sleep.c:75: error: for each function it appears in.) Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/sleep.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index a81f468ab410..e6a4b564ccaa 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -86,7 +86,9 @@ int acpi_save_state_mem(void) saved_magic = 0x12345678; #else /* CONFIG_64BIT */ header->trampoline_segment = setup_trampoline() >> 4; +#ifdef CONFIG_SMP stack_start.sp = temp_stack + 4096; +#endif initial_code = (unsigned long)wakeup_long64; saved_magic = 0x123456789abcdef0; #endif /* CONFIG_64BIT */ -- cgit v1.2.3 From d52d53b8a5b258bfaab9223a5e7284fcfdd48577 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 16 Jun 2008 20:10:55 -0700 Subject: RFC x86: try to remove arch_get_ram_range want to remove arch_get_ram_range, and use early_node_map instead. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/mm/init_32.c | 6 ++++-- drivers/pci/intel-iommu.c | 51 ++++++++++++++++++++++++++++++++++------------- include/linux/mm.h | 2 +- mm/page_alloc.c | 10 +++++++--- 4 files changed, 49 insertions(+), 20 deletions(-) diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 65d55056b6e7..a0484adbf59d 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -298,7 +298,7 @@ struct add_highpages_data { unsigned long end_pfn; }; -static void __init add_highpages_work_fn(unsigned long start_pfn, +static int __init add_highpages_work_fn(unsigned long start_pfn, unsigned long end_pfn, void *datax) { int node_pfn; @@ -311,7 +311,7 @@ static void __init add_highpages_work_fn(unsigned long start_pfn, final_start_pfn = max(start_pfn, data->start_pfn); final_end_pfn = min(end_pfn, data->end_pfn); if (final_start_pfn >= final_end_pfn) - return; + return 0; for (node_pfn = final_start_pfn; node_pfn < final_end_pfn; node_pfn++) { @@ -321,6 +321,8 @@ static void __init add_highpages_work_fn(unsigned long start_pfn, add_one_highpage_init(page, node_pfn); } + return 0; + } void __init add_highpages_with_active_regions(int nid, unsigned long start_pfn, diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 66c0fd21894b..bb0642318a95 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1637,12 +1637,43 @@ static inline int iommu_prepare_rmrr_dev(struct dmar_rmrr_unit *rmrr, } #ifdef CONFIG_DMAR_GFX_WA -extern int arch_get_ram_range(int slot, u64 *addr, u64 *size); +struct iommu_prepare_data { + struct pci_dev *pdev; + int ret; +}; + +static int __init iommu_prepare_work_fn(unsigned long start_pfn, + unsigned long end_pfn, void *datax) +{ + struct iommu_prepare_data *data; + + data = (struct iommu_prepare_data *)datax; + + data->ret = iommu_prepare_identity_map(data->pdev, + start_pfn<ret; + +} + +static int __init iommu_prepare_with_active_regions(struct pci_dev *pdev) +{ + int nid; + struct iommu_prepare_data data; + + data.pdev = pdev; + data.ret = 0; + + for_each_online_node(nid) { + work_with_active_regions(nid, iommu_prepare_work_fn, &data); + if (data.ret) + return data.ret; + } + return data.ret; +} + static void __init iommu_prepare_gfx_mapping(void) { struct pci_dev *pdev = NULL; - u64 base, size; - int slot; int ret; for_each_pci_dev(pdev) { @@ -1651,17 +1682,9 @@ static void __init iommu_prepare_gfx_mapping(void) continue; printk(KERN_INFO "IOMMU: gfx device %s 1-1 mapping\n", pci_name(pdev)); - slot = arch_get_ram_range(0, &base, &size); - while (slot >= 0) { - ret = iommu_prepare_identity_map(pdev, - base, base + size); - if (ret) - goto error; - slot = arch_get_ram_range(slot, &base, &size); - } - continue; -error: - printk(KERN_ERR "IOMMU: mapping reserved region failed\n"); + ret = iommu_prepare_with_active_regions(pdev); + if (ret) + printk(KERN_ERR "IOMMU: mapping reserved region failed\n"); } } #endif diff --git a/include/linux/mm.h b/include/linux/mm.h index 3d647b24041f..cf1cd3a2ed78 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1011,7 +1011,7 @@ extern unsigned long find_min_pfn_with_active_regions(void); extern unsigned long find_max_pfn_with_active_regions(void); extern void free_bootmem_with_active_regions(int nid, unsigned long max_low_pfn); -typedef void (*work_fn_t)(unsigned long, unsigned long, void *); +typedef int (*work_fn_t)(unsigned long, unsigned long, void *); extern void work_with_active_regions(int nid, work_fn_t work_fn, void *data); extern void sparse_memory_present_with_active_regions(int nid); #ifndef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 41c6e3aa059f..e25b6b24f844 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2932,10 +2932,14 @@ void __init free_bootmem_with_active_regions(int nid, void __init work_with_active_regions(int nid, work_fn_t work_fn, void *data) { int i; + int ret; - for_each_active_range_index_in_nid(i, nid) - work_fn(early_node_map[i].start_pfn, early_node_map[i].end_pfn, - data); + for_each_active_range_index_in_nid(i, nid) { + ret = work_fn(early_node_map[i].start_pfn, + early_node_map[i].end_pfn, data); + if (ret) + break; + } } /** * sparse_memory_present_with_active_regions - Call memory_present for each active range -- cgit v1.2.3 From be5bf9fa1c327fa6fd6e7ba44665437dd558dfe3 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 16 Jun 2008 14:54:46 -0700 Subject: xen: reserve Xen-specific memory in e820 map Signed-off-by: Jeremy Fitzhardinge Cc: Yinghai Lu Cc: the arch/x86 maintainers Signed-off-by: Ingo Molnar Cc: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/xen/setup.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index a29575803204..dc2ca8ad3603 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -40,9 +40,22 @@ char * __init xen_memory_setup(void) max_pfn = min(MAX_DOMAIN_PAGES, max_pfn); e820.nr_map = 0; + e820_add_region(0, LOWMEMSIZE(), E820_RAM); e820_add_region(HIGH_MEMORY, PFN_PHYS(max_pfn)-HIGH_MEMORY, E820_RAM); + /* + * Reserve Xen bits: + * - mfn_list + * - xen_start_info + * See comment above "struct start_info" in + */ + e820_add_region(__pa(xen_start_info->mfn_list), + xen_start_info->pt_base - xen_start_info->mfn_list, + E820_RESERVED); + + sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); + return "Xen"; } -- cgit v1.2.3 From b792c755907cffceab393585b626ef2553c38538 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 16 Jun 2008 14:54:49 -0700 Subject: xen: reserve ISA space in e820 map [ TODO: release the underlying memory back to Xen. ] Signed-off-by: Jeremy Fitzhardinge Cc: Yinghai Lu Cc: the arch/x86 maintainers Signed-off-by: Ingo Molnar Cc: Yinghai Lu Cc: Ian Campbell Signed-off-by: Ingo Molnar --- arch/x86/xen/setup.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index dc2ca8ad3603..e0a39595bde3 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -41,8 +42,15 @@ char * __init xen_memory_setup(void) e820.nr_map = 0; - e820_add_region(0, LOWMEMSIZE(), E820_RAM); - e820_add_region(HIGH_MEMORY, PFN_PHYS(max_pfn)-HIGH_MEMORY, E820_RAM); + e820_add_region(0, PFN_PHYS(max_pfn), E820_RAM); + + /* + * Even though this is normal, usable memory under Xen, reserve + * ISA memory anyway because too many things think they can poke + * about in there. + */ + e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS, + E820_RESERVED); /* * Reserve Xen bits: -- cgit v1.2.3 From 88a6846c70ad6bf33a545d554ace801d69e8a1a5 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 16 Jun 2008 14:54:51 -0700 Subject: xen: set max_pfn_mapped Signed-off-by: Jeremy Fitzhardinge Cc: Yinghai Lu Cc: the arch/x86 maintainers Signed-off-by: Ingo Molnar Cc: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 316623cf411f..76ad1efaf09e 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1304,6 +1304,7 @@ asmlinkage void __init xen_start_kernel(void) init_pg_tables_start = __pa(pgd); init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE; + max_pfn_mapped = (init_pg_tables_end + 512*1024) >> PAGE_SHIFT; init_mm.pgd = pgd; /* use the Xen pagetables to start */ -- cgit v1.2.3 From 3c999f142665265afd0fe9190204dd051f17e505 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Fri, 20 Jun 2008 16:11:20 -0700 Subject: x86: check command line when CONFIG_X86_MPPARSE is not set, v2 if acpi=off, acpi=noirq and pci=noacpi, we need to disable apic. Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: "Maciej W. Rozycki" Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/boot.c | 14 ++++++++++++++ arch/x86/kernel/apic_32.c | 2 +- arch/x86/kernel/setup.c | 4 ++++ arch/x86/kernel/setup_32.c | 5 +++++ arch/x86/kernel/setup_64.c | 9 +++++++++ include/asm-x86/apic.h | 6 +++++- include/linux/acpi.h | 6 ++++++ 7 files changed, 44 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 6516359922ba..5c0107602b62 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1787,6 +1787,20 @@ static int __init parse_pci(char *arg) } early_param("pci", parse_pci); +int __init acpi_mps_check(void) +{ +#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_X86_MPPARSE) +/* mptable code is not built-in*/ + if (acpi_disabled || acpi_noirq) { + printk(KERN_WARNING "MPS support code is not built-in.\n" + "Using acpi=off or acpi=noirq or pci=noacpi " + "may have problem\n"); + return 1; + } +#endif + return 0; +} + #ifdef CONFIG_X86_IO_APIC static int __init parse_acpi_skip_timer_override(char *arg) { diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index dd8de26b2786..4932d7813bcd 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -57,7 +57,7 @@ unsigned long mp_lapic_addr; * * -1=force-disable, +1=force-enable */ -static int enable_local_apic __initdata; +int enable_local_apic; /* Local APIC timer verification ok */ static int local_apic_timer_verify_ok; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index c5330f601b68..56aee55cf8dc 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -161,6 +161,10 @@ void __init setup_per_cpu_areas(void) char *ptr; int cpu; + /* no processor from mptable or madt */ + if (!num_processors) + num_processors = 1; + #ifdef CONFIG_HOTPLUG_CPU prefill_possible_map(); #else diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 369d0fe1ff9c..cad4e893df05 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -677,6 +677,11 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); + if (acpi_mps_check()){ + enable_local_apic = -1; + clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); + } + finish_e820_parsing(); probe_roms(); diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index a93300de4da9..175c696ec536 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -302,6 +302,11 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); + if (acpi_mps_check()) { + disable_apic = 1; + clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC); + } + #ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT if (init_ohci1394_dma_early) init_ohci1394_dma_on_all_controllers(); @@ -723,6 +728,10 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) cpu_devs[c->x86_vendor]->c_early_init(c); validate_pat_support(c); + + /* early_param could clear that, but recall get it set again */ + if (disable_apic) + clear_cpu_cap(c, X86_FEATURE_APIC); } /* diff --git a/include/asm-x86/apic.h b/include/asm-x86/apic.h index 313bcaf4b6c3..9fe941cd843d 100644 --- a/include/asm-x86/apic.h +++ b/include/asm-x86/apic.h @@ -39,8 +39,12 @@ extern int apic_verbosity; extern int local_apic_timer_c2_ok; extern int ioapic_force; -extern int disable_apic; +#ifdef CONFIG_X86_64 +extern int disable_apic; +#else +extern int enable_local_apic; +#endif /* * Basic functions accessing APICs. */ diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 41f7ce7edd7a..0601075d09a1 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -82,6 +82,7 @@ char * __acpi_map_table (unsigned long phys_addr, unsigned long size); int early_acpi_boot_init(void); int acpi_boot_init (void); int acpi_boot_table_init (void); +int acpi_mps_check (void); int acpi_numa_init (void); int acpi_table_init (void); @@ -250,6 +251,11 @@ static inline int acpi_boot_table_init(void) return 0; } +static inline int acpi_mps_check(void) +{ + return 0; +} + static inline int acpi_check_resource_conflict(struct resource *res) { return 0; -- cgit v1.2.3 From ce38cc79964687d3c7e92663bc040552416fca27 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jun 2008 01:14:27 -0700 Subject: x86: clean up init_amd() 1. move out calling of check_enable_amd_mmconf_dmi out of setup_64.c put it into init_amd(), so don't need to make extra dmi check for system with other cpus. 2. 15 --> 0xf Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd_64.c | 22 ++++++++++++++-------- arch/x86/kernel/setup_64.c | 4 ---- 2 files changed, 14 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c index 30b7557c9641..958526d6a74a 100644 --- a/arch/x86/kernel/cpu/amd_64.c +++ b/arch/x86/kernel/cpu/amd_64.c @@ -131,7 +131,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) * Errata 63 for SH-B3 steppings * Errata 122 for all steppings (F+ have it disabled by default) */ - if (c->x86 == 15) { + if (c->x86 == 0xf) { rdmsrl(MSR_K8_HWCR, value); value |= 1 << 6; wrmsrl(MSR_K8_HWCR, value); @@ -143,10 +143,11 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) clear_cpu_cap(c, 0*32+31); /* On C+ stepping K8 rep microcode works well for copy/memset */ - level = cpuid_eax(1); - if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || - level >= 0x0f58)) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); + if (c->x86 == 0xf) { + level = cpuid_eax(1); + if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); + } if (c->x86 == 0x10 || c->x86 == 0x11) set_cpu_cap(c, X86_FEATURE_REP_GOOD); @@ -157,7 +158,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) level = get_model_name(c); if (!level) { switch (c->x86) { - case 15: + case 0xf: /* Should distinguish Models here, but this is only a fallback anyways. */ strcpy(c->x86_model_id, "Hammer"); @@ -176,14 +177,19 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) else num_cache_leaves = 3; - if (c->x86 == 0xf || c->x86 == 0x10 || c->x86 == 0x11) + if (c->x86 >= 0xf && c->x86 <= 0x11) set_cpu_cap(c, X86_FEATURE_K8); /* MFENCE stops RDTSC speculation */ set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); - if (c->x86 == 0x10) + if (c->x86 == 0x10) { + /* do this for boot cpu */ + if (c == &boot_cpu_data) + check_enable_amd_mmconf_dmi(); + fam10h_check_enable_mmcfg(); + } if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { unsigned long long tseg; diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index 175c696ec536..c94464ab04ba 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -72,7 +72,6 @@ #include #include #include -#include #include #ifdef CONFIG_PARAVIRT @@ -474,9 +473,6 @@ void __init setup_arch(char **cmdline_p) conswitchp = &dummy_con; #endif #endif - - /* do this before identify_cpu for boot cpu */ - check_enable_amd_mmconf_dmi(); } struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; -- cgit v1.2.3 From 04606618bb50c4ec754585a82732ea4facfe2bc9 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jun 2008 01:38:41 -0700 Subject: x86: remove some acpi ifdefs in setup_32/64 Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/setup_32.c | 5 +---- arch/x86/kernel/setup_64.c | 4 ---- 2 files changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index cad4e893df05..e274ee6ff582 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -726,12 +726,10 @@ void __init setup_arch(char **cmdline_p) io_delay_init(); -#ifdef CONFIG_ACPI /* * Parse the ACPI tables for possible boot-time SMP configuration. */ acpi_boot_table_init(); -#endif #ifdef CONFIG_ACPI_NUMA /* @@ -812,9 +810,8 @@ void __init setup_arch(char **cmdline_p) early_quirks(); -#ifdef CONFIG_ACPI acpi_boot_init(); -#endif + #if defined(CONFIG_X86_MPPARSE) || defined(CONFIG_X86_VISWS) if (smp_found_config) get_smp_config(); diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c index c94464ab04ba..9b516eecada0 100644 --- a/arch/x86/kernel/setup_64.c +++ b/arch/x86/kernel/setup_64.c @@ -355,13 +355,11 @@ void __init setup_arch(char **cmdline_p) kvmclock_init(); #endif -#ifdef CONFIG_ACPI /* * Initialize the ACPI boot-time table parser (gets the RSDP and SDT). * Call this early for SRAT node setup. */ acpi_boot_table_init(); -#endif /* How many end-of-memory variables you have, grandma! */ max_low_pfn = end_pfn; @@ -432,12 +430,10 @@ void __init setup_arch(char **cmdline_p) early_quirks(); -#ifdef CONFIG_ACPI /* * Read APIC and some other early information from ACPI tables. */ acpi_boot_init(); -#endif init_cpu_to_node(); -- cgit v1.2.3 From f580366f77cc4e035a68369105fbeae5bf436b4c Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 21 Jun 2008 03:24:19 -0700 Subject: x86: seperate funcs from setup_64 to cpu common_64.c Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/Makefile | 2 +- arch/x86/kernel/cpu/common_64.c | 406 ++++++++++++++++++++ arch/x86/kernel/setup_64.c | 823 ---------------------------------------- include/asm-x86/processor.h | 1 + 4 files changed, 408 insertions(+), 824 deletions(-) create mode 100644 arch/x86/kernel/cpu/common_64.c delete mode 100644 arch/x86/kernel/setup_64.c diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 65b1be5fe9ce..ee76eaad3001 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -6,7 +6,7 @@ obj-y := intel_cacheinfo.o addon_cpuid_features.o obj-y += proc.o feature_names.o obj-$(CONFIG_X86_32) += common.o bugs.o -obj-$(CONFIG_X86_64) += bugs_64.o +obj-$(CONFIG_X86_64) += common_64.o bugs_64.o obj-$(CONFIG_X86_32) += amd.o obj-$(CONFIG_X86_64) += amd_64.o obj-$(CONFIG_X86_32) += cyrix.o diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c new file mode 100644 index 000000000000..b6f205063f74 --- /dev/null +++ b/arch/x86/kernel/cpu/common_64.c @@ -0,0 +1,406 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_X86_LOCAL_APIC +#include +#include +#include +#endif + +#include "cpu.h" + +/* We need valid kernel segments for data and code in long mode too + * IRET will check the segment types kkeil 2000/10/28 + * Also sysret mandates a special GDT layout + */ +/* The TLS descriptors are currently at a different place compared to i386. + Hopefully nobody expects them at a fixed place (Wine?) */ +DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { + [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } }, + [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } }, + [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } }, + [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } }, + [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } }, + [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } }, +} }; +EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); + +__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; + +/* Current gdt points %fs at the "master" per-cpu area: after this, + * it's on the real one. */ +void switch_to_new_gdt(void) +{ + struct desc_ptr gdt_descr; + + gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); + gdt_descr.size = GDT_SIZE - 1; + load_gdt(&gdt_descr); +} + +struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; + +static void __cpuinit default_init(struct cpuinfo_x86 *c) +{ + display_cacheinfo(c); +} + +static struct cpu_dev __cpuinitdata default_cpu = { + .c_init = default_init, + .c_vendor = "Unknown", +}; +static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; + +int __cpuinit get_model_name(struct cpuinfo_x86 *c) +{ + unsigned int *v; + + if (c->extended_cpuid_level < 0x80000004) + return 0; + + v = (unsigned int *) c->x86_model_id; + cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); + cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]); + cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]); + c->x86_model_id[48] = 0; + return 1; +} + + +void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) +{ + unsigned int n, dummy, eax, ebx, ecx, edx; + + n = c->extended_cpuid_level; + + if (n >= 0x80000005) { + cpuid(0x80000005, &dummy, &ebx, &ecx, &edx); + printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), " + "D cache %dK (%d bytes/line)\n", + edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); + c->x86_cache_size = (ecx>>24) + (edx>>24); + /* On K8 L1 TLB is inclusive, so don't count it */ + c->x86_tlbsize = 0; + } + + if (n >= 0x80000006) { + cpuid(0x80000006, &dummy, &ebx, &ecx, &edx); + ecx = cpuid_ecx(0x80000006); + c->x86_cache_size = ecx >> 16; + c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff); + + printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n", + c->x86_cache_size, ecx & 0xFF); + } + if (n >= 0x80000008) { + cpuid(0x80000008, &eax, &dummy, &dummy, &dummy); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; + } +} + +void __cpuinit detect_ht(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + u32 eax, ebx, ecx, edx; + int index_msb, core_bits; + + cpuid(1, &eax, &ebx, &ecx, &edx); + + + if (!cpu_has(c, X86_FEATURE_HT)) + return; + if (cpu_has(c, X86_FEATURE_CMP_LEGACY)) + goto out; + + smp_num_siblings = (ebx & 0xff0000) >> 16; + + if (smp_num_siblings == 1) { + printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); + } else if (smp_num_siblings > 1) { + + if (smp_num_siblings > NR_CPUS) { + printk(KERN_WARNING "CPU: Unsupported number of " + "siblings %d", smp_num_siblings); + smp_num_siblings = 1; + return; + } + + index_msb = get_count_order(smp_num_siblings); + c->phys_proc_id = phys_pkg_id(index_msb); + + smp_num_siblings = smp_num_siblings / c->x86_max_cores; + + index_msb = get_count_order(smp_num_siblings); + + core_bits = get_count_order(c->x86_max_cores); + + c->cpu_core_id = phys_pkg_id(index_msb) & + ((1 << core_bits) - 1); + } +out: + if ((c->x86_max_cores * smp_num_siblings) > 1) { + printk(KERN_INFO "CPU: Physical Processor ID: %d\n", + c->phys_proc_id); + printk(KERN_INFO "CPU: Processor Core ID: %d\n", + c->cpu_core_id); + } + +#endif +} + +static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) +{ + char *v = c->x86_vendor_id; + int i; + static int printed; + + for (i = 0; i < X86_VENDOR_NUM; i++) { + if (cpu_devs[i]) { + if (!strcmp(v, cpu_devs[i]->c_ident[0]) || + (cpu_devs[i]->c_ident[1] && + !strcmp(v, cpu_devs[i]->c_ident[1]))) { + c->x86_vendor = i; + this_cpu = cpu_devs[i]; + return; + } + } + } + if (!printed) { + printed++; + printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); + printk(KERN_ERR "CPU: Your system may be unstable.\n"); + } + c->x86_vendor = X86_VENDOR_UNKNOWN; +} + +static void __init early_cpu_support_print(void) +{ + int i,j; + struct cpu_dev *cpu_devx; + + printk("KERNEL supported cpus:\n"); + for (i = 0; i < X86_VENDOR_NUM; i++) { + cpu_devx = cpu_devs[i]; + if (!cpu_devx) + continue; + for (j = 0; j < 2; j++) { + if (!cpu_devx->c_ident[j]) + continue; + printk(" %s %s\n", cpu_devx->c_vendor, + cpu_devx->c_ident[j]); + } + } +} + +static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c); + +void __init early_cpu_init(void) +{ + struct cpu_vendor_dev *cvdev; + + for (cvdev = __x86cpuvendor_start ; + cvdev < __x86cpuvendor_end ; + cvdev++) + cpu_devs[cvdev->vendor] = cvdev->cpu_dev; + early_cpu_support_print(); + early_identify_cpu(&boot_cpu_data); +} + +/* Do some early cpuid on the boot CPU to get some parameter that are + needed before check_bugs. Everything advanced is in identify_cpu + below. */ +static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) +{ + u32 tfms, xlvl; + + c->loops_per_jiffy = loops_per_jiffy; + c->x86_cache_size = -1; + c->x86_vendor = X86_VENDOR_UNKNOWN; + c->x86_model = c->x86_mask = 0; /* So far unknown... */ + c->x86_vendor_id[0] = '\0'; /* Unset */ + c->x86_model_id[0] = '\0'; /* Unset */ + c->x86_clflush_size = 64; + c->x86_cache_alignment = c->x86_clflush_size; + c->x86_max_cores = 1; + c->x86_coreid_bits = 0; + c->extended_cpuid_level = 0; + memset(&c->x86_capability, 0, sizeof c->x86_capability); + + /* Get vendor name */ + cpuid(0x00000000, (unsigned int *)&c->cpuid_level, + (unsigned int *)&c->x86_vendor_id[0], + (unsigned int *)&c->x86_vendor_id[8], + (unsigned int *)&c->x86_vendor_id[4]); + + get_cpu_vendor(c); + + /* Initialize the standard set of capabilities */ + /* Note that the vendor-specific code below might override */ + + /* Intel-defined flags: level 0x00000001 */ + if (c->cpuid_level >= 0x00000001) { + __u32 misc; + cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4], + &c->x86_capability[0]); + c->x86 = (tfms >> 8) & 0xf; + c->x86_model = (tfms >> 4) & 0xf; + c->x86_mask = tfms & 0xf; + if (c->x86 == 0xf) + c->x86 += (tfms >> 20) & 0xff; + if (c->x86 >= 0x6) + c->x86_model += ((tfms >> 16) & 0xF) << 4; + if (test_cpu_cap(c, X86_FEATURE_CLFLSH)) + c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; + } else { + /* Have CPUID level 0 only - unheard of */ + c->x86 = 4; + } + + c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff; +#ifdef CONFIG_SMP + c->phys_proc_id = c->initial_apicid; +#endif + /* AMD-defined flags: level 0x80000001 */ + xlvl = cpuid_eax(0x80000000); + c->extended_cpuid_level = xlvl; + if ((xlvl & 0xffff0000) == 0x80000000) { + if (xlvl >= 0x80000001) { + c->x86_capability[1] = cpuid_edx(0x80000001); + c->x86_capability[6] = cpuid_ecx(0x80000001); + } + if (xlvl >= 0x80000004) + get_model_name(c); /* Default name */ + } + + /* Transmeta-defined flags: level 0x80860001 */ + xlvl = cpuid_eax(0x80860000); + if ((xlvl & 0xffff0000) == 0x80860000) { + /* Don't set x86_cpuid_level here for now to not confuse. */ + if (xlvl >= 0x80860001) + c->x86_capability[2] = cpuid_edx(0x80860001); + } + + c->extended_cpuid_level = cpuid_eax(0x80000000); + if (c->extended_cpuid_level >= 0x80000007) + c->x86_power = cpuid_edx(0x80000007); + + if (c->x86_vendor != X86_VENDOR_UNKNOWN && + cpu_devs[c->x86_vendor]->c_early_init) + cpu_devs[c->x86_vendor]->c_early_init(c); + + validate_pat_support(c); + + /* early_param could clear that, but recall get it set again */ + if (disable_apic) + clear_cpu_cap(c, X86_FEATURE_APIC); +} + +/* + * This does the hard work of actually picking apart the CPU stuff... + */ +void __cpuinit identify_cpu(struct cpuinfo_x86 *c) +{ + int i; + + early_identify_cpu(c); + + init_scattered_cpuid_features(c); + + c->apicid = phys_pkg_id(0); + + /* + * Vendor-specific initialization. In this section we + * canonicalize the feature flags, meaning if there are + * features a certain CPU supports which CPUID doesn't + * tell us, CPUID claiming incorrect flags, or other bugs, + * we handle them here. + * + * At the end of this section, c->x86_capability better + * indicate the features this CPU genuinely supports! + */ + if (this_cpu->c_init) + this_cpu->c_init(c); + + detect_ht(c); + + /* + * On SMP, boot_cpu_data holds the common feature set between + * all CPUs; so make sure that we indicate which features are + * common between the CPUs. The first time this routine gets + * executed, c == &boot_cpu_data. + */ + if (c != &boot_cpu_data) { + /* AND the already accumulated flags with these */ + for (i = 0; i < NCAPINTS; i++) + boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; + } + + /* Clear all flags overriden by options */ + for (i = 0; i < NCAPINTS; i++) + c->x86_capability[i] &= ~cleared_cpu_caps[i]; + +#ifdef CONFIG_X86_MCE + mcheck_init(c); +#endif + select_idle_routine(c); + +#ifdef CONFIG_NUMA + numa_add_cpu(smp_processor_id()); +#endif + +} + +void __cpuinit identify_boot_cpu(void) +{ + identify_cpu(&boot_cpu_data); +} + +void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) +{ + BUG_ON(c == &boot_cpu_data); + identify_cpu(c); + mtrr_ap_init(); +} + +static __init int setup_noclflush(char *arg) +{ + setup_clear_cpu_cap(X86_FEATURE_CLFLSH); + return 1; +} +__setup("noclflush", setup_noclflush); + +void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) +{ + if (c->x86_model_id[0]) + printk(KERN_CONT "%s", c->x86_model_id); + + if (c->x86_mask || c->cpuid_level >= 0) + printk(KERN_CONT " stepping %02x\n", c->x86_mask); + else + printk(KERN_CONT "\n"); +} + +static __init int setup_disablecpuid(char *arg) +{ + int bit; + if (get_option(&arg, &bit) && bit < NCAPINTS*32) + setup_clear_cpu_cap(bit); + else + return 0; + return 1; +} +__setup("clearcpuid=", setup_disablecpuid); diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c deleted file mode 100644 index 9b516eecada0..000000000000 --- a/arch/x86/kernel/setup_64.c +++ /dev/null @@ -1,823 +0,0 @@ -/* - * Copyright (C) 1995 Linus Torvalds - */ - -/* - * This file handles the architecture-dependent parts of initialization - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - phy-handle : The phandle for the PHY connected to this ethernet - controller. - - fixed-link : where a is emulated phy id - choose any, - but unique to the all specified fixed-links, b is duplex - 0 half, - 1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no - pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause. - - Recommended properties: - - - phy-connection-type : a string naming the controller/PHY interface type, - i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii", - "tbi", or "rtbi". This property is only really needed if the connection - is of type "rgmii-id", as all other connection types are detected by - hardware. - - - Example: - - ethernet@24000 { - #size-cells = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <24000 1000>; - mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = ; - interrupt-parent = <40000>; - phy-handle = <2452000> - }; - - - - c) PHY nodes + a) PHY nodes Required properties: @@ -1351,7 +1263,7 @@ platforms are moved over to use the flattened-device-tree model. }; - d) Interrupt controllers + b) Interrupt controllers Some SOC devices contain interrupt controllers that are different from the standard Open PIC specification. The SOC device nodes for @@ -1371,508 +1283,7 @@ platforms are moved over to use the flattened-device-tree model. device_type = "open-pic"; }; - - e) I2C - - Required properties : - - - device_type : Should be "i2c" - - reg : Offset and length of the register set for the device - - Recommended properties : - - - compatible : Should be "fsl-i2c" for parts compatible with - Freescale I2C specifications. - - interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - dfsrr : boolean; if defined, indicates that this I2C device has - a digital filter sampling rate register - - fsl5200-clocking : boolean; if defined, indicated that this device - uses the FSL 5200 clocking mechanism. - - Example : - - i2c@3000 { - interrupt-parent = <40000>; - interrupts = <1b 3>; - reg = <3000 18>; - device_type = "i2c"; - compatible = "fsl-i2c"; - dfsrr; - }; - - - f) Freescale SOC USB controllers - - The device node for a USB controller that is part of a Freescale - SOC is as described in the document "Open Firmware Recommended - Practice : Universal Serial Bus" with the following modifications - and additions : - - Required properties : - - compatible : Should be "fsl-usb2-mph" for multi port host USB - controllers, or "fsl-usb2-dr" for dual role USB controllers - - phy_type : For multi port host USB controllers, should be one of - "ulpi", or "serial". For dual role USB controllers, should be - one of "ulpi", "utmi", "utmi_wide", or "serial". - - reg : Offset and length of the register set for the device - - port0 : boolean; if defined, indicates port0 is connected for - fsl-usb2-mph compatible controllers. Either this property or - "port1" (or both) must be defined for "fsl-usb2-mph" compatible - controllers. - - port1 : boolean; if defined, indicates port1 is connected for - fsl-usb2-mph compatible controllers. Either this property or - "port0" (or both) must be defined for "fsl-usb2-mph" compatible - controllers. - - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible - controllers. Can be "host", "peripheral", or "otg". Default to - "host" if not defined for backward compatibility. - - Recommended properties : - - interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - Example multi port host USB controller device node : - usb@22000 { - compatible = "fsl-usb2-mph"; - reg = <22000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <27 1>; - phy_type = "ulpi"; - port0; - port1; - }; - - Example dual role USB controller device node : - usb@23000 { - compatible = "fsl-usb2-dr"; - reg = <23000 1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupt-parent = <700>; - interrupts = <26 1>; - dr_mode = "otg"; - phy = "ulpi"; - }; - - - g) Freescale SOC SEC Security Engines - - Required properties: - - - device_type : Should be "crypto" - - model : Model of the device. Should be "SEC1" or "SEC2" - - compatible : Should be "talitos" - - reg : Offset and length of the register set for the device - - interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - num-channels : An integer representing the number of channels - available. - - channel-fifo-len : An integer representing the number of - descriptor pointers each channel fetch fifo can hold. - - exec-units-mask : The bitmask representing what execution units - (EUs) are available. It's a single 32-bit cell. EU information - should be encoded following the SEC's Descriptor Header Dword - EU_SEL0 field documentation, i.e. as follows: - - bit 0 = reserved - should be 0 - bit 1 = set if SEC has the ARC4 EU (AFEU) - bit 2 = set if SEC has the DES/3DES EU (DEU) - bit 3 = set if SEC has the message digest EU (MDEU) - bit 4 = set if SEC has the random number generator EU (RNG) - bit 5 = set if SEC has the public key EU (PKEU) - bit 6 = set if SEC has the AES EU (AESU) - bit 7 = set if SEC has the Kasumi EU (KEU) - - bits 8 through 31 are reserved for future SEC EUs. - - - descriptor-types-mask : The bitmask representing what descriptors - are available. It's a single 32-bit cell. Descriptor type - information should be encoded following the SEC's Descriptor - Header Dword DESC_TYPE field documentation, i.e. as follows: - - bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type - bit 1 = set if SEC supports the ipsec_esp descriptor type - bit 2 = set if SEC supports the common_nonsnoop desc. type - bit 3 = set if SEC supports the 802.11i AES ccmp desc. type - bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type - bit 5 = set if SEC supports the srtp descriptor type - bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type - bit 7 = set if SEC supports the pkeu_assemble descriptor type - bit 8 = set if SEC supports the aesu_key_expand_output desc.type - bit 9 = set if SEC supports the pkeu_ptmul descriptor type - bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type - bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type - - ..and so on and so forth. - - Example: - - /* MPC8548E */ - crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <30000 10000>; - interrupts = <1d 3>; - interrupt-parent = <40000>; - num-channels = <4>; - channel-fifo-len = <18>; - exec-units-mask = <000000fe>; - descriptor-types-mask = <012b0ebf>; - }; - - h) Board Control and Status (BCSR) - - Required properties: - - - device_type : Should be "board-control" - - reg : Offset and length of the register set for the device - - Example: - - bcsr@f8000000 { - device_type = "board-control"; - reg = ; - }; - - i) Freescale QUICC Engine module (QE) - This represents qe module that is installed on PowerQUICC II Pro. - - NOTE: This is an interim binding; it should be updated to fit - in with the CPM binding later in this document. - - Basically, it is a bus of devices, that could act more or less - as a complete entity (UCC, USB etc ). All of them should be siblings on - the "root" qe node, using the common properties from there. - The description below applies to the qe of MPC8360 and - more nodes and properties would be extended in the future. - - i) Root QE device - - Required properties: - - compatible : should be "fsl,qe"; - - model : precise model of the QE, Can be "QE", "CPM", or "CPM2" - - reg : offset and length of the device registers. - - bus-frequency : the clock frequency for QUICC Engine. - - Recommended properties - - brg-frequency : the internal clock source frequency for baud-rate - generators in Hz. - - Example: - qe@e0100000 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - compatible = "fsl,qe"; - ranges = <0 e0100000 00100000>; - reg = ; - brg-frequency = <0>; - bus-frequency = <179A7B00>; - } - - - ii) SPI (Serial Peripheral Interface) - - Required properties: - - cell-index : SPI controller index. - - compatible : should be "fsl,spi". - - mode : the SPI operation mode, it can be "cpu" or "cpu-qe". - - reg : Offset and length of the register set for the device - - interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - Example: - spi@4c0 { - cell-index = <0>; - compatible = "fsl,spi"; - reg = <4c0 40>; - interrupts = <82 0>; - interrupt-parent = <700>; - mode = "cpu"; - }; - - - iii) USB (Universal Serial Bus Controller) - - Required properties: - - compatible : could be "qe_udc" or "fhci-hcd". - - mode : the could be "host" or "slave". - - reg : Offset and length of the register set for the device - - interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - Example(slave): - usb@6c0 { - compatible = "qe_udc"; - reg = <6c0 40>; - interrupts = <8b 0>; - interrupt-parent = <700>; - mode = "slave"; - }; - - - iv) UCC (Unified Communications Controllers) - - Required properties: - - device_type : should be "network", "hldc", "uart", "transparent" - "bisync", "atm", or "serial". - - compatible : could be "ucc_geth" or "fsl_atm" and so on. - - cell-index : the ucc number(1-8), corresponding to UCCx in UM. - - reg : Offset and length of the register set for the device - - interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - pio-handle : The phandle for the Parallel I/O port configuration. - - port-number : for UART drivers, the port number to use, between 0 and 3. - This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0. - The port number is added to the minor number of the device. Unlike the - CPM UART driver, the port-number is required for the QE UART driver. - - soft-uart : for UART drivers, if specified this means the QE UART device - driver should use "Soft-UART" mode, which is needed on some SOCs that have - broken UART hardware. Soft-UART is provided via a microcode upload. - - rx-clock-name: the UCC receive clock source - "none": clock source is disabled - "brg1" through "brg16": clock source is BRG1-BRG16, respectively - "clk1" through "clk24": clock source is CLK1-CLK24, respectively - - tx-clock-name: the UCC transmit clock source - "none": clock source is disabled - "brg1" through "brg16": clock source is BRG1-BRG16, respectively - "clk1" through "clk24": clock source is CLK1-CLK24, respectively - The following two properties are deprecated. rx-clock has been replaced - with rx-clock-name, and tx-clock has been replaced with tx-clock-name. - Drivers that currently use the deprecated properties should continue to - do so, in order to support older device trees, but they should be updated - to check for the new properties first. - - rx-clock : represents the UCC receive clock source. - 0x00 : clock source is disabled; - 0x1~0x10 : clock source is BRG1~BRG16 respectively; - 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. - - tx-clock: represents the UCC transmit clock source; - 0x00 : clock source is disabled; - 0x1~0x10 : clock source is BRG1~BRG16 respectively; - 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. - - Required properties for network device_type: - - mac-address : list of bytes representing the ethernet address. - - phy-handle : The phandle for the PHY connected to this controller. - - Recommended properties: - - phy-connection-type : a string naming the controller/PHY interface type, - i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal - Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only), - "tbi", or "rtbi". - - Example: - ucc@2000 { - device_type = "network"; - compatible = "ucc_geth"; - cell-index = <1>; - reg = <2000 200>; - interrupts = ; - interrupt-parent = <700>; - mac-address = [ 00 04 9f 00 23 23 ]; - rx-clock = "none"; - tx-clock = "clk9"; - phy-handle = <212000>; - phy-connection-type = "gmii"; - pio-handle = <140001>; - }; - - - v) Parallel I/O Ports - - This node configures Parallel I/O ports for CPUs with QE support. - The node should reside in the "soc" node of the tree. For each - device that using parallel I/O ports, a child node should be created. - See the definition of the Pin configuration nodes below for more - information. - - Required properties: - - device_type : should be "par_io". - - reg : offset to the register set and its length. - - num-ports : number of Parallel I/O ports - - Example: - par_io@1400 { - reg = <1400 100>; - #address-cells = <1>; - #size-cells = <0>; - device_type = "par_io"; - num-ports = <7>; - ucc_pin@01 { - ...... - }; - - Note that "par_io" nodes are obsolete, and should not be used for - the new device trees. Instead, each Par I/O bank should be represented - via its own gpio-controller node: - - Required properties: - - #gpio-cells : should be "2". - - compatible : should be "fsl,-qe-pario-bank", - "fsl,mpc8323-qe-pario-bank". - - reg : offset to the register set and its length. - - gpio-controller : node to identify gpio controllers. - - Example: - qe_pio_a: gpio-controller@1400 { - #gpio-cells = <2>; - compatible = "fsl,mpc8360-qe-pario-bank", - "fsl,mpc8323-qe-pario-bank"; - reg = <0x1400 0x18>; - gpio-controller; - }; - - qe_pio_e: gpio-controller@1460 { - #gpio-cells = <2>; - compatible = "fsl,mpc8360-qe-pario-bank", - "fsl,mpc8323-qe-pario-bank"; - reg = <0x1460 0x18>; - gpio-controller; - }; - - vi) Pin configuration nodes - - Required properties: - - linux,phandle : phandle of this node; likely referenced by a QE - device. - - pio-map : array of pin configurations. Each pin is defined by 6 - integers. The six numbers are respectively: port, pin, dir, - open_drain, assignment, has_irq. - - port : port number of the pin; 0-6 represent port A-G in UM. - - pin : pin number in the port. - - dir : direction of the pin, should encode as follows: - - 0 = The pin is disabled - 1 = The pin is an output - 2 = The pin is an input - 3 = The pin is I/O - - - open_drain : indicates the pin is normal or wired-OR: - - 0 = The pin is actively driven as an output - 1 = The pin is an open-drain driver. As an output, the pin is - driven active-low, otherwise it is three-stated. - - - assignment : function number of the pin according to the Pin Assignment - tables in User Manual. Each pin can have up to 4 possible functions in - QE and two options for CPM. - - has_irq : indicates if the pin is used as source of external - interrupts. - - Example: - ucc_pin@01 { - linux,phandle = <140001>; - pio-map = < - /* port pin dir open_drain assignment has_irq */ - 0 3 1 0 1 0 /* TxD0 */ - 0 4 1 0 1 0 /* TxD1 */ - 0 5 1 0 1 0 /* TxD2 */ - 0 6 1 0 1 0 /* TxD3 */ - 1 6 1 0 3 0 /* TxD4 */ - 1 7 1 0 1 0 /* TxD5 */ - 1 9 1 0 2 0 /* TxD6 */ - 1 a 1 0 2 0 /* TxD7 */ - 0 9 2 0 1 0 /* RxD0 */ - 0 a 2 0 1 0 /* RxD1 */ - 0 b 2 0 1 0 /* RxD2 */ - 0 c 2 0 1 0 /* RxD3 */ - 0 d 2 0 1 0 /* RxD4 */ - 1 1 2 0 2 0 /* RxD5 */ - 1 0 2 0 2 0 /* RxD6 */ - 1 4 2 0 2 0 /* RxD7 */ - 0 7 1 0 1 0 /* TX_EN */ - 0 8 1 0 1 0 /* TX_ER */ - 0 f 2 0 1 0 /* RX_DV */ - 0 10 2 0 1 0 /* RX_ER */ - 0 0 2 0 1 0 /* RX_CLK */ - 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ - 2 8 2 0 1 0>; /* GTX125 - CLK9 */ - }; - - vii) Multi-User RAM (MURAM) - - Required properties: - - compatible : should be "fsl,qe-muram", "fsl,cpm-muram". - - mode : the could be "host" or "slave". - - ranges : Should be defined as specified in 1) to describe the - translation of MURAM addresses. - - data-only : sub-node which defines the address area under MURAM - bus that can be allocated as data/parameter - - Example: - - muram@10000 { - compatible = "fsl,qe-muram", "fsl,cpm-muram"; - ranges = <0 00010000 0000c000>; - - data-only@0{ - compatible = "fsl,qe-muram-data", - "fsl,cpm-muram-data"; - reg = <0 c000>; - }; - }; - - viii) Uploaded QE firmware - - If a new firwmare has been uploaded to the QE (usually by the - boot loader), then a 'firmware' child node should be added to the QE - node. This node provides information on the uploaded firmware that - device drivers may need. - - Required properties: - - id: The string name of the firmware. This is taken from the 'id' - member of the qe_firmware structure of the uploaded firmware. - Device drivers can search this string to determine if the - firmware they want is already present. - - extended-modes: The Extended Modes bitfield, taken from the - firmware binary. It is a 64-bit number represented - as an array of two 32-bit numbers. - - virtual-traps: The virtual traps, taken from the firmware binary. - It is an array of 8 32-bit numbers. - - Example: - - firmware { - id = "Soft-UART"; - extended-modes = <0 0>; - virtual-traps = <0 0 0 0 0 0 0 0>; - } - - j) CFI or JEDEC memory-mapped NOR flash + c) CFI or JEDEC memory-mapped NOR flash Flash chips (Memory Technology Devices) are often used for solid state file systems on embedded devices. @@ -1936,310 +1347,7 @@ platforms are moved over to use the flattened-device-tree model. }; }; - k) Global Utilities Block - - The global utilities block controls power management, I/O device - enabling, power-on-reset configuration monitoring, general-purpose - I/O signal configuration, alternate function selection for multiplexed - signals, and clock control. - - Required properties: - - - compatible : Should define the compatible device type for - global-utilities. - - reg : Offset and length of the register set for the device. - - Recommended properties: - - - fsl,has-rstcr : Indicates that the global utilities register set - contains a functioning "reset control register" (i.e. the board - is wired to reset upon setting the HRESET_REQ bit in this register). - - Example: - - global-utilities@e0000 { /* global utilities block */ - compatible = "fsl,mpc8548-guts"; - reg = ; - fsl,has-rstcr; - }; - - l) Freescale Communications Processor Module - - NOTE: This is an interim binding, and will likely change slightly, - as more devices are supported. The QE bindings especially are - incomplete. - - i) Root CPM node - - Properties: - - compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe". - - reg : A 48-byte region beginning with CPCR. - - Example: - cpm@119c0 { - #address-cells = <1>; - #size-cells = <1>; - #interrupt-cells = <2>; - compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; - reg = <119c0 30>; - } - - ii) Properties common to mulitple CPM/QE devices - - - fsl,cpm-command : This value is ORed with the opcode and command flag - to specify the device on which a CPM command operates. - - - fsl,cpm-brg : Indicates which baud rate generator the device - is associated with. If absent, an unused BRG - should be dynamically allocated. If zero, the - device uses an external clock rather than a BRG. - - - reg : Unless otherwise specified, the first resource represents the - scc/fcc/ucc registers, and the second represents the device's - parameter RAM region (if it has one). - - iii) Serial - - Currently defined compatibles: - - fsl,cpm1-smc-uart - - fsl,cpm2-smc-uart - - fsl,cpm1-scc-uart - - fsl,cpm2-scc-uart - - fsl,qe-uart - - Example: - - serial@11a00 { - device_type = "serial"; - compatible = "fsl,mpc8272-scc-uart", - "fsl,cpm2-scc-uart"; - reg = <11a00 20 8000 100>; - interrupts = <28 8>; - interrupt-parent = <&PIC>; - fsl,cpm-brg = <1>; - fsl,cpm-command = <00800000>; - }; - - iii) Network - - Currently defined compatibles: - - fsl,cpm1-scc-enet - - fsl,cpm2-scc-enet - - fsl,cpm1-fec-enet - - fsl,cpm2-fcc-enet (third resource is GFEMR) - - fsl,qe-enet - - Example: - - ethernet@11300 { - device_type = "network"; - compatible = "fsl,mpc8272-fcc-enet", - "fsl,cpm2-fcc-enet"; - reg = <11300 20 8400 100 11390 1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8>; - interrupt-parent = <&PIC>; - phy-handle = <&PHY0>; - fsl,cpm-command = <12000300>; - }; - - iv) MDIO - - Currently defined compatibles: - fsl,pq1-fec-mdio (reg is same as first resource of FEC device) - fsl,cpm2-mdio-bitbang (reg is port C registers) - - Properties for fsl,cpm2-mdio-bitbang: - fsl,mdio-pin : pin of port C controlling mdio data - fsl,mdc-pin : pin of port C controlling mdio clock - - Example: - - mdio@10d40 { - device_type = "mdio"; - compatible = "fsl,mpc8272ads-mdio-bitbang", - "fsl,mpc8272-mdio-bitbang", - "fsl,cpm2-mdio-bitbang"; - reg = <10d40 14>; - #address-cells = <1>; - #size-cells = <0>; - fsl,mdio-pin = <12>; - fsl,mdc-pin = <13>; - }; - - v) Baud Rate Generators - - Currently defined compatibles: - fsl,cpm-brg - fsl,cpm1-brg - fsl,cpm2-brg - - Properties: - - reg : There may be an arbitrary number of reg resources; BRG - numbers are assigned to these in order. - - clock-frequency : Specifies the base frequency driving - the BRG. - - Example: - - brg@119f0 { - compatible = "fsl,mpc8272-brg", - "fsl,cpm2-brg", - "fsl,cpm-brg"; - reg = <119f0 10 115f0 10>; - clock-frequency = ; - }; - - vi) Interrupt Controllers - - Currently defined compatibles: - - fsl,cpm1-pic - - only one interrupt cell - - fsl,pq1-pic - - fsl,cpm2-pic - - second interrupt cell is level/sense: - - 2 is falling edge - - 8 is active low - - Example: - - interrupt-controller@10c00 { - #interrupt-cells = <2>; - interrupt-controller; - reg = <10c00 80>; - compatible = "mpc8272-pic", "fsl,cpm2-pic"; - }; - - vii) USB (Universal Serial Bus Controller) - - Properties: - - compatible : "fsl,cpm1-usb", "fsl,cpm2-usb", "fsl,qe-usb" - - Example: - usb@11bc0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,cpm2-usb"; - reg = <11b60 18 8b00 100>; - interrupts = ; - interrupt-parent = <&PIC>; - fsl,cpm-command = <2e600000>; - }; - - viii) Multi-User RAM (MURAM) - - The multi-user/dual-ported RAM is expressed as a bus under the CPM node. - - Ranges must be set up subject to the following restrictions: - - - Children's reg nodes must be offsets from the start of all muram, even - if the user-data area does not begin at zero. - - If multiple range entries are used, the difference between the parent - address and the child address must be the same in all, so that a single - mapping can cover them all while maintaining the ability to determine - CPM-side offsets with pointer subtraction. It is recommended that - multiple range entries not be used. - - A child address of zero must be translatable, even if no reg resources - contain it. - - A child "data" node must exist, compatible with "fsl,cpm-muram-data", to - indicate the portion of muram that is usable by the OS for arbitrary - purposes. The data node may have an arbitrary number of reg resources, - all of which contribute to the allocatable muram pool. - - Example, based on mpc8272: - - muram@0 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 10000>; - - data@0 { - compatible = "fsl,cpm-muram-data"; - reg = <0 2000 9800 800>; - }; - }; - - x) I2C - - The I2C controller is expressed as a bus under the CPM node. - - Properties: - - compatible : "fsl,cpm1-i2c", "fsl,cpm2-i2c" - - reg : On CPM2 devices, the second resource doesn't specify the I2C - Parameter RAM itself, but the I2C_BASE field of the CPM2 Parameter RAM - (typically 0x8afc 0x2). - - #address-cells : Should be one. The cell is the i2c device address with - the r/w bit set to zero. - - #size-cells : Should be zero. - - clock-frequency : Can be used to set the i2c clock frequency. If - unspecified, a default frequency of 60kHz is being used. - The following two properties are deprecated. They are only used by legacy - i2c drivers to find the bus to probe: - - linux,i2c-index : Can be used to hard code an i2c bus number. By default, - the bus number is dynamically assigned by the i2c core. - - linux,i2c-class : Can be used to override the i2c class. The class is used - by legacy i2c device drivers to find a bus in a specific context like - system management, video or sound. By default, I2C_CLASS_HWMON (1) is - being used. The definition of the classes can be found in - include/i2c/i2c.h - - Example, based on mpc823: - - i2c@860 { - compatible = "fsl,mpc823-i2c", - "fsl,cpm1-i2c"; - reg = <0x860 0x20 0x3c80 0x30>; - interrupts = <16>; - interrupt-parent = <&CPM_PIC>; - fsl,cpm-command = <0x10>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@68 { - compatible = "dallas,ds1307"; - reg = <0x68>; - }; - }; - - m) Chipselect/Local Bus - - Properties: - - name : Should be localbus - - #address-cells : Should be either two or three. The first cell is the - chipselect number, and the remaining cells are the - offset into the chipselect. - - #size-cells : Either one or two, depending on how large each chipselect - can be. - - ranges : Each range corresponds to a single chipselect, and cover - the entire access window as configured. - - Example: - localbus@f0010100 { - compatible = "fsl,mpc8272-localbus", - "fsl,pq2-localbus"; - #address-cells = <2>; - #size-cells = <1>; - reg = ; - - ranges = <0 0 fe000000 02000000 - 1 0 f4500000 00008000>; - - flash@0,0 { - compatible = "jedec-flash"; - reg = <0 0 2000000>; - bank-width = <4>; - device-width = <1>; - }; - - board-control@1,0 { - reg = <1 0 20>; - compatible = "fsl,mpc8272ads-bcsr"; - }; - }; - - - n) 4xx/Axon EMAC ethernet nodes + d) 4xx/Axon EMAC ethernet nodes The EMAC ethernet controller in IBM and AMCC 4xx chips, and also the Axon bridge. To operate this needs to interact with a ths @@ -2387,7 +1495,7 @@ platforms are moved over to use the flattened-device-tree model. available. For Axon: 0x0000012a - o) Xilinx IP cores + e) Xilinx IP cores The Xilinx EDK toolchain ships with a set of IP cores (devices) for use in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range @@ -2681,206 +1789,7 @@ platforms are moved over to use the flattened-device-tree model. - reg-offset : A value of 3 is required - reg-shift : A value of 2 is required - - p) Freescale Synchronous Serial Interface - - The SSI is a serial device that communicates with audio codecs. It can - be programmed in AC97, I2S, left-justified, or right-justified modes. - - Required properties: - - compatible : compatible list, containing "fsl,ssi" - - cell-index : the SSI, <0> = SSI1, <1> = SSI2, and so on - - reg : offset and length of the register set for the device - - interrupts : where a is the interrupt number and b is a - field that represents an encoding of the sense and - level information for the interrupt. This should be - encoded based on the information in section 2) - depending on the type of interrupt controller you - have. - - interrupt-parent : the phandle for the interrupt controller that - services interrupts for this device. - - fsl,mode : the operating mode for the SSI interface - "i2s-slave" - I2S mode, SSI is clock slave - "i2s-master" - I2S mode, SSI is clock master - "lj-slave" - left-justified mode, SSI is clock slave - "lj-master" - l.j. mode, SSI is clock master - "rj-slave" - right-justified mode, SSI is clock slave - "rj-master" - r.j., SSI is clock master - "ac97-slave" - AC97 mode, SSI is clock slave - "ac97-master" - AC97 mode, SSI is clock master - - Optional properties: - - codec-handle : phandle to a 'codec' node that defines an audio - codec connected to this SSI. This node is typically - a child of an I2C or other control node. - - Child 'codec' node required properties: - - compatible : compatible list, contains the name of the codec - - Child 'codec' node optional properties: - - clock-frequency : The frequency of the input clock, which typically - comes from an on-board dedicated oscillator. - - * Freescale 83xx DMA Controller - - Freescale PowerPC 83xx have on chip general purpose DMA controllers. - - Required properties: - - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma", where CHIP is the processor - (mpc8349, mpc8360, etc.) and the second is - "fsl,elo-dma" - - reg : - - ranges : Should be defined as specified in 1) to describe the - DMA controller channels. - - cell-index : controller index. 0 for controller @ 0x8100 - - interrupts : - - interrupt-parent : optional, if needed for interrupt mapping - - - - DMA channel nodes: - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma-channel", where CHIP is the processor - (mpc8349, mpc8350, etc.) and the second is - "fsl,elo-dma-channel" - - reg : - - cell-index : dma channel index starts at 0. - - Optional properties: - - interrupts : - (on 83xx this is expected to be identical to - the interrupts property of the parent node) - - interrupt-parent : optional, if needed for interrupt mapping - - Example: - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; - reg = <82a8 4>; - ranges = <0 8100 1a4>; - interrupt-parent = <&ipic>; - interrupts = <47 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <0>; - reg = <0 80>; - }; - dma-channel@80 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <1>; - reg = <80 80>; - }; - dma-channel@100 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <2>; - reg = <100 80>; - }; - dma-channel@180 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <3>; - reg = <180 80>; - }; - }; - - * Freescale 85xx/86xx DMA Controller - - Freescale PowerPC 85xx/86xx have on chip general purpose DMA controllers. - - Required properties: - - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma", where CHIP is the processor - (mpc8540, mpc8540, etc.) and the second is - "fsl,eloplus-dma" - - reg : - - cell-index : controller index. 0 for controller @ 0x21000, - 1 for controller @ 0xc000 - - ranges : Should be defined as specified in 1) to describe the - DMA controller channels. - - - DMA channel nodes: - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-dma-channel", where CHIP is the processor - (mpc8540, mpc8560, etc.) and the second is - "fsl,eloplus-dma-channel" - - cell-index : dma channel index starts at 0. - - reg : - - interrupts : - - interrupt-parent : optional, if needed for interrupt mapping - - Example: - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; - reg = <21300 4>; - ranges = <0 21100 200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0 80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <14 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <80 80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <15 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <100 80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <16 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <180 80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <17 2>; - }; - }; - - * Freescale 8xxx/3.0 Gb/s SATA nodes - - SATA nodes are defined to describe on-chip Serial ATA controllers. - Each SATA port should have its own node. - - Required properties: - - compatible : compatible list, contains 2 entries, first is - "fsl,CHIP-sata", where CHIP is the processor - (mpc8315, mpc8379, etc.) and the second is - "fsl,pq-sata" - - interrupts : - - cell-index : controller index. - 1 for controller @ 0x18000 - 2 for controller @ 0x19000 - 3 for controller @ 0x1a000 - 4 for controller @ 0x1b000 - - Optional properties: - - interrupt-parent : optional, if needed for interrupt mapping - - reg : - - Example: - - sata@18000 { - compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; - reg = <0x18000 0x1000>; - cell-index = <1>; - interrupts = <2c 8>; - interrupt-parent = < &ipic >; - }; - - q) USB EHCI controllers + f) USB EHCI controllers Required properties: - compatible : should be "usb-ehci". @@ -2906,109 +1815,6 @@ platforms are moved over to use the flattened-device-tree model. big-endian; }; - r) Freescale Display Interface Unit - - The Freescale DIU is a LCD controller, with proper hardware, it can also - drive DVI monitors. - - Required properties: - - compatible : should be "fsl-diu". - - reg : should contain at least address and length of the DIU register - set. - - Interrupts : one DIU interrupt should be describe here. - - Example (MPC8610HPCD) - display@2c000 { - compatible = "fsl,diu"; - reg = <0x2c000 100>; - interrupts = <72 2>; - interrupt-parent = <&mpic>; - }; - - s) Freescale on board FPGA - - This is the memory-mapped registers for on board FPGA. - - Required properities: - - compatible : should be "fsl,fpga-pixis". - - reg : should contain the address and the lenght of the FPPGA register - set. - - Example (MPC8610HPCD) - board-control@e8000000 { - compatible = "fsl,fpga-pixis"; - reg = <0xe8000000 32>; - }; - - t) Freescale MSI interrupt controller - - Reguired properities: - - compatible : compatible list, contains 2 entries, - first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, - etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on - the parent type. - - reg : should contain the address and the length of the shared message - interrupt register set. - - msi-available-ranges: use style section to define which - msi interrupt can be used in the 256 msi interrupts. This property is - optional, without this, all the 256 MSI interrupts can be used. - - interrupts : each one of the interrupts here is one entry per 32 MSIs, - and routed to the host interrupt controller. the interrupts should - be set as edge sensitive. - - interrupt-parent: the phandle for the interrupt controller - that services interrupts for this device. for 83xx cpu, the interrupts - are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed - to MPIC. - - Example - msi@41600 { - compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - u) Freescale General-purpose Timers Module - - Required properties: - - compatible : should be - "fsl,-gtm", "fsl,gtm" for SOC GTMs - "fsl,-qe-gtm", "fsl,qe-gtm", "fsl,gtm" for QE GTMs - "fsl,-cpm2-gtm", "fsl,cpm2-gtm", "fsl,gtm" for CPM2 GTMs - - reg : should contain gtm registers location and length (0x40). - - interrupts : should contain four interrupts. - - interrupt-parent : interrupt source phandle. - - clock-frequency : specifies the frequency driving the timer. - - Example: - - timer@500 { - compatible = "fsl,mpc8360-gtm", "fsl,gtm"; - reg = <0x500 0x40>; - interrupts = <90 8 78 8 84 8 72 8>; - interrupt-parent = <&ipic>; - /* filled by u-boot */ - clock-frequency = <0>; - }; - - timer@440 { - compatible = "fsl,mpc8360-qe-gtm", "fsl,qe-gtm", "fsl,gtm"; - reg = <0x440 0x40>; - interrupts = <12 13 14 15>; - interrupt-parent = <&qeic>; - /* filled by u-boot */ - clock-frequency = <0>; - }; - VII - Marvell Discovery mv64[345]6x System Controller chips =========================================================== diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt new file mode 100644 index 000000000000..74ae6f1cd2d6 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/board.txt @@ -0,0 +1,29 @@ +* Board Control and Status (BCSR) + +Required properties: + + - device_type : Should be "board-control" + - reg : Offset and length of the register set for the device + +Example: + + bcsr@f8000000 { + device_type = "board-control"; + reg = ; + }; + +* Freescale on board FPGA + +This is the memory-mapped registers for on board FPGA. + +Required properities: +- compatible : should be "fsl,fpga-pixis". +- reg : should contain the address and the lenght of the FPPGA register + set. + +Example (MPC8610HPCD): + + board-control@e8000000 { + compatible = "fsl,fpga-pixis"; + reg = <0xe8000000 32>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt new file mode 100644 index 000000000000..088fc471e03a --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm.txt @@ -0,0 +1,67 @@ +* Freescale Communications Processor Module + +NOTE: This is an interim binding, and will likely change slightly, +as more devices are supported. The QE bindings especially are +incomplete. + +* Root CPM node + +Properties: +- compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe". +- reg : A 48-byte region beginning with CPCR. + +Example: + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; + reg = <119c0 30>; + } + +* Properties common to mulitple CPM/QE devices + +- fsl,cpm-command : This value is ORed with the opcode and command flag + to specify the device on which a CPM command operates. + +- fsl,cpm-brg : Indicates which baud rate generator the device + is associated with. If absent, an unused BRG + should be dynamically allocated. If zero, the + device uses an external clock rather than a BRG. + +- reg : Unless otherwise specified, the first resource represents the + scc/fcc/ucc registers, and the second represents the device's + parameter RAM region (if it has one). + +* Multi-User RAM (MURAM) + +The multi-user/dual-ported RAM is expressed as a bus under the CPM node. + +Ranges must be set up subject to the following restrictions: + +- Children's reg nodes must be offsets from the start of all muram, even + if the user-data area does not begin at zero. +- If multiple range entries are used, the difference between the parent + address and the child address must be the same in all, so that a single + mapping can cover them all while maintaining the ability to determine + CPM-side offsets with pointer subtraction. It is recommended that + multiple range entries not be used. +- A child address of zero must be translatable, even if no reg resources + contain it. + +A child "data" node must exist, compatible with "fsl,cpm-muram-data", to +indicate the portion of muram that is usable by the OS for arbitrary +purposes. The data node may have an arbitrary number of reg resources, +all of which contribute to the allocatable muram pool. + +Example, based on mpc8272: + muram@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 2000 9800 800>; + }; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/brg.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/brg.txt new file mode 100644 index 000000000000..4c7d45eaf025 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/brg.txt @@ -0,0 +1,21 @@ +* Baud Rate Generators + +Currently defined compatibles: +fsl,cpm-brg +fsl,cpm1-brg +fsl,cpm2-brg + +Properties: +- reg : There may be an arbitrary number of reg resources; BRG + numbers are assigned to these in order. +- clock-frequency : Specifies the base frequency driving + the BRG. + +Example: + brg@119f0 { + compatible = "fsl,mpc8272-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <119f0 10 115f0 10>; + clock-frequency = ; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/i2c.txt new file mode 100644 index 000000000000..87bc6048667e --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/i2c.txt @@ -0,0 +1,41 @@ +* I2C + +The I2C controller is expressed as a bus under the CPM node. + +Properties: +- compatible : "fsl,cpm1-i2c", "fsl,cpm2-i2c" +- reg : On CPM2 devices, the second resource doesn't specify the I2C + Parameter RAM itself, but the I2C_BASE field of the CPM2 Parameter RAM + (typically 0x8afc 0x2). +- #address-cells : Should be one. The cell is the i2c device address with + the r/w bit set to zero. +- #size-cells : Should be zero. +- clock-frequency : Can be used to set the i2c clock frequency. If + unspecified, a default frequency of 60kHz is being used. +The following two properties are deprecated. They are only used by legacy +i2c drivers to find the bus to probe: +- linux,i2c-index : Can be used to hard code an i2c bus number. By default, + the bus number is dynamically assigned by the i2c core. +- linux,i2c-class : Can be used to override the i2c class. The class is used + by legacy i2c device drivers to find a bus in a specific context like + system management, video or sound. By default, I2C_CLASS_HWMON (1) is + being used. The definition of the classes can be found in + include/i2c/i2c.h + +Example, based on mpc823: + + i2c@860 { + compatible = "fsl,mpc823-i2c", + "fsl,cpm1-i2c"; + reg = <0x860 0x20 0x3c80 0x30>; + interrupts = <16>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/pic.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/pic.txt new file mode 100644 index 000000000000..8e3ee1681618 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/pic.txt @@ -0,0 +1,18 @@ +* Interrupt Controllers + +Currently defined compatibles: +- fsl,cpm1-pic + - only one interrupt cell +- fsl,pq1-pic +- fsl,cpm2-pic + - second interrupt cell is level/sense: + - 2 is falling edge + - 8 is active low + +Example: + interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <10c00 80>; + compatible = "mpc8272-pic", "fsl,cpm2-pic"; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/usb.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/usb.txt new file mode 100644 index 000000000000..74bfda4bb824 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/cpm/usb.txt @@ -0,0 +1,15 @@ +* USB (Universal Serial Bus Controller) + +Properties: +- compatible : "fsl,cpm1-usb", "fsl,cpm2-usb", "fsl,qe-usb" + +Example: + usb@11bc0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,cpm2-usb"; + reg = <11b60 18 8b00 100>; + interrupts = ; + interrupt-parent = <&PIC>; + fsl,cpm-command = <2e600000>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/network.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/network.txt new file mode 100644 index 000000000000..0e4269446580 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/network.txt @@ -0,0 +1,45 @@ +* Network + +Currently defined compatibles: +- fsl,cpm1-scc-enet +- fsl,cpm2-scc-enet +- fsl,cpm1-fec-enet +- fsl,cpm2-fcc-enet (third resource is GFEMR) +- fsl,qe-enet + +Example: + + ethernet@11300 { + device_type = "network"; + compatible = "fsl,mpc8272-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <11300 20 8400 100 11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + fsl,cpm-command = <12000300>; + }; + +* MDIO + +Currently defined compatibles: +fsl,pq1-fec-mdio (reg is same as first resource of FEC device) +fsl,cpm2-mdio-bitbang (reg is port C registers) + +Properties for fsl,cpm2-mdio-bitbang: +fsl,mdio-pin : pin of port C controlling mdio data +fsl,mdc-pin : pin of port C controlling mdio clock + +Example: + mdio@10d40 { + device_type = "mdio"; + compatible = "fsl,mpc8272ads-mdio-bitbang", + "fsl,mpc8272-mdio-bitbang", + "fsl,cpm2-mdio-bitbang"; + reg = <10d40 14>; + #address-cells = <1>; + #size-cells = <0>; + fsl,mdio-pin = <12>; + fsl,mdc-pin = <13>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt new file mode 100644 index 000000000000..78790d58dc2c --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt @@ -0,0 +1,58 @@ +* Freescale QUICC Engine module (QE) +This represents qe module that is installed on PowerQUICC II Pro. + +NOTE: This is an interim binding; it should be updated to fit +in with the CPM binding later in this document. + +Basically, it is a bus of devices, that could act more or less +as a complete entity (UCC, USB etc ). All of them should be siblings on +the "root" qe node, using the common properties from there. +The description below applies to the qe of MPC8360 and +more nodes and properties would be extended in the future. + +i) Root QE device + +Required properties: +- compatible : should be "fsl,qe"; +- model : precise model of the QE, Can be "QE", "CPM", or "CPM2" +- reg : offset and length of the device registers. +- bus-frequency : the clock frequency for QUICC Engine. + +Recommended properties +- brg-frequency : the internal clock source frequency for baud-rate + generators in Hz. + +Example: + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,qe"; + ranges = <0 e0100000 00100000>; + reg = ; + brg-frequency = <0>; + bus-frequency = <179A7B00>; + } + +* Multi-User RAM (MURAM) + +Required properties: +- compatible : should be "fsl,qe-muram", "fsl,cpm-muram". +- mode : the could be "host" or "slave". +- ranges : Should be defined as specified in 1) to describe the + translation of MURAM addresses. +- data-only : sub-node which defines the address area under MURAM + bus that can be allocated as data/parameter + +Example: + + muram@10000 { + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0 00010000 0000c000>; + + data-only@0{ + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0 c000>; + }; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt new file mode 100644 index 000000000000..6c238f59b2a9 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/firmware.txt @@ -0,0 +1,24 @@ +* Uploaded QE firmware + + If a new firwmare has been uploaded to the QE (usually by the + boot loader), then a 'firmware' child node should be added to the QE + node. This node provides information on the uploaded firmware that + device drivers may need. + + Required properties: + - id: The string name of the firmware. This is taken from the 'id' + member of the qe_firmware structure of the uploaded firmware. + Device drivers can search this string to determine if the + firmware they want is already present. + - extended-modes: The Extended Modes bitfield, taken from the + firmware binary. It is a 64-bit number represented + as an array of two 32-bit numbers. + - virtual-traps: The virtual traps, taken from the firmware binary. + It is an array of 8 32-bit numbers. + +Example: + firmware { + id = "Soft-UART"; + extended-modes = <0 0>; + virtual-traps = <0 0 0 0 0 0 0 0>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/par_io.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/par_io.txt new file mode 100644 index 000000000000..60984260207b --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/par_io.txt @@ -0,0 +1,51 @@ +* Parallel I/O Ports + +This node configures Parallel I/O ports for CPUs with QE support. +The node should reside in the "soc" node of the tree. For each +device that using parallel I/O ports, a child node should be created. +See the definition of the Pin configuration nodes below for more +information. + +Required properties: +- device_type : should be "par_io". +- reg : offset to the register set and its length. +- num-ports : number of Parallel I/O ports + +Example: +par_io@1400 { + reg = <1400 100>; + #address-cells = <1>; + #size-cells = <0>; + device_type = "par_io"; + num-ports = <7>; + ucc_pin@01 { + ...... + }; + +Note that "par_io" nodes are obsolete, and should not be used for +the new device trees. Instead, each Par I/O bank should be represented +via its own gpio-controller node: + +Required properties: +- #gpio-cells : should be "2". +- compatible : should be "fsl,-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank". +- reg : offset to the register set and its length. +- gpio-controller : node to identify gpio controllers. + +Example: + qe_pio_a: gpio-controller@1400 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1400 0x18>; + gpio-controller; + }; + + qe_pio_e: gpio-controller@1460 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1460 0x18>; + gpio-controller; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt new file mode 100644 index 000000000000..c5b43061db3a --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt @@ -0,0 +1,60 @@ +* Pin configuration nodes + +Required properties: +- linux,phandle : phandle of this node; likely referenced by a QE + device. +- pio-map : array of pin configurations. Each pin is defined by 6 + integers. The six numbers are respectively: port, pin, dir, + open_drain, assignment, has_irq. + - port : port number of the pin; 0-6 represent port A-G in UM. + - pin : pin number in the port. + - dir : direction of the pin, should encode as follows: + + 0 = The pin is disabled + 1 = The pin is an output + 2 = The pin is an input + 3 = The pin is I/O + + - open_drain : indicates the pin is normal or wired-OR: + + 0 = The pin is actively driven as an output + 1 = The pin is an open-drain driver. As an output, the pin is + driven active-low, otherwise it is three-stated. + + - assignment : function number of the pin according to the Pin Assignment + tables in User Manual. Each pin can have up to 4 possible functions in + QE and two options for CPM. + - has_irq : indicates if the pin is used as source of external + interrupts. + +Example: + ucc_pin@01 { + linux,phandle = <140001>; + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 3 1 0 1 0 /* TxD0 */ + 0 4 1 0 1 0 /* TxD1 */ + 0 5 1 0 1 0 /* TxD2 */ + 0 6 1 0 1 0 /* TxD3 */ + 1 6 1 0 3 0 /* TxD4 */ + 1 7 1 0 1 0 /* TxD5 */ + 1 9 1 0 2 0 /* TxD6 */ + 1 a 1 0 2 0 /* TxD7 */ + 0 9 2 0 1 0 /* RxD0 */ + 0 a 2 0 1 0 /* RxD1 */ + 0 b 2 0 1 0 /* RxD2 */ + 0 c 2 0 1 0 /* RxD3 */ + 0 d 2 0 1 0 /* RxD4 */ + 1 1 2 0 2 0 /* RxD5 */ + 1 0 2 0 2 0 /* RxD6 */ + 1 4 2 0 2 0 /* RxD7 */ + 0 7 1 0 1 0 /* TX_EN */ + 0 8 1 0 1 0 /* TX_ER */ + 0 f 2 0 1 0 /* RX_DV */ + 0 10 2 0 1 0 /* RX_ER */ + 0 0 2 0 1 0 /* RX_CLK */ + 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ + 2 8 2 0 1 0>; /* GTX125 - CLK9 */ + }; + + diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/ucc.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/ucc.txt new file mode 100644 index 000000000000..e47734bee3f0 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/ucc.txt @@ -0,0 +1,70 @@ +* UCC (Unified Communications Controllers) + +Required properties: +- device_type : should be "network", "hldc", "uart", "transparent" + "bisync", "atm", or "serial". +- compatible : could be "ucc_geth" or "fsl_atm" and so on. +- cell-index : the ucc number(1-8), corresponding to UCCx in UM. +- reg : Offset and length of the register set for the device +- interrupts : where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. +- pio-handle : The phandle for the Parallel I/O port configuration. +- port-number : for UART drivers, the port number to use, between 0 and 3. + This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0. + The port number is added to the minor number of the device. Unlike the + CPM UART driver, the port-number is required for the QE UART driver. +- soft-uart : for UART drivers, if specified this means the QE UART device + driver should use "Soft-UART" mode, which is needed on some SOCs that have + broken UART hardware. Soft-UART is provided via a microcode upload. +- rx-clock-name: the UCC receive clock source + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +- tx-clock-name: the UCC transmit clock source + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +The following two properties are deprecated. rx-clock has been replaced +with rx-clock-name, and tx-clock has been replaced with tx-clock-name. +Drivers that currently use the deprecated properties should continue to +do so, in order to support older device trees, but they should be updated +to check for the new properties first. +- rx-clock : represents the UCC receive clock source. + 0x00 : clock source is disabled; + 0x1~0x10 : clock source is BRG1~BRG16 respectively; + 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. +- tx-clock: represents the UCC transmit clock source; + 0x00 : clock source is disabled; + 0x1~0x10 : clock source is BRG1~BRG16 respectively; + 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. + +Required properties for network device_type: +- mac-address : list of bytes representing the ethernet address. +- phy-handle : The phandle for the PHY connected to this controller. + +Recommended properties: +- phy-connection-type : a string naming the controller/PHY interface type, + i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal + Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only), + "tbi", or "rtbi". + +Example: + ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <1>; + reg = <2000 200>; + interrupts = ; + interrupt-parent = <700>; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = "none"; + tx-clock = "clk9"; + phy-handle = <212000>; + phy-connection-type = "gmii"; + pio-handle = <140001>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt new file mode 100644 index 000000000000..c8f44d6bcbcf --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt @@ -0,0 +1,22 @@ +* USB (Universal Serial Bus Controller) + +Required properties: +- compatible : could be "qe_udc" or "fhci-hcd". +- mode : the could be "host" or "slave". +- reg : Offset and length of the register set for the device +- interrupts : where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Example(slave): + usb@6c0 { + compatible = "qe_udc"; + reg = <6c0 40>; + interrupts = <8b 0>; + interrupt-parent = <700>; + mode = "slave"; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt new file mode 100644 index 000000000000..b35f3482e3e4 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt @@ -0,0 +1,21 @@ +* Serial + +Currently defined compatibles: +- fsl,cpm1-smc-uart +- fsl,cpm2-smc-uart +- fsl,cpm1-scc-uart +- fsl,cpm2-scc-uart +- fsl,qe-uart + +Example: + + serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8272-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <11a00 20 8000 100>; + interrupts = <28 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <00800000>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/diu.txt b/Documentation/powerpc/dts-bindings/fsl/diu.txt new file mode 100644 index 000000000000..deb35de70988 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/diu.txt @@ -0,0 +1,18 @@ +* Freescale Display Interface Unit + +The Freescale DIU is a LCD controller, with proper hardware, it can also +drive DVI monitors. + +Required properties: +- compatible : should be "fsl-diu". +- reg : should contain at least address and length of the DIU register + set. +- Interrupts : one DIU interrupt should be describe here. + +Example (MPC8610HPCD): + display@2c000 { + compatible = "fsl,diu"; + reg = <0x2c000 100>; + interrupts = <72 2>; + interrupt-parent = <&mpic>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/dma.txt b/Documentation/powerpc/dts-bindings/fsl/dma.txt new file mode 100644 index 000000000000..86826df00e64 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/dma.txt @@ -0,0 +1,127 @@ +* Freescale 83xx DMA Controller + +Freescale PowerPC 83xx have on chip general purpose DMA controllers. + +Required properties: + +- compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-dma", where CHIP is the processor + (mpc8349, mpc8360, etc.) and the second is + "fsl,elo-dma" +- reg : +- ranges : Should be defined as specified in 1) to describe the + DMA controller channels. +- cell-index : controller index. 0 for controller @ 0x8100 +- interrupts : +- interrupt-parent : optional, if needed for interrupt mapping + + +- DMA channel nodes: + - compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-dma-channel", where CHIP is the processor + (mpc8349, mpc8350, etc.) and the second is + "fsl,elo-dma-channel" + - reg : + - cell-index : dma channel index starts at 0. + +Optional properties: + - interrupts : + (on 83xx this is expected to be identical to + the interrupts property of the parent node) + - interrupt-parent : optional, if needed for interrupt mapping + +Example: + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <82a8 4>; + ranges = <0 8100 1a4>; + interrupt-parent = <&ipic>; + interrupts = <47 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <0>; + reg = <0 80>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <1>; + reg = <80 80>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <2>; + reg = <100 80>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + cell-index = <3>; + reg = <180 80>; + }; + }; + +* Freescale 85xx/86xx DMA Controller + +Freescale PowerPC 85xx/86xx have on chip general purpose DMA controllers. + +Required properties: + +- compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-dma", where CHIP is the processor + (mpc8540, mpc8540, etc.) and the second is + "fsl,eloplus-dma" +- reg : +- cell-index : controller index. 0 for controller @ 0x21000, + 1 for controller @ 0xc000 +- ranges : Should be defined as specified in 1) to describe the + DMA controller channels. + +- DMA channel nodes: + - compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-dma-channel", where CHIP is the processor + (mpc8540, mpc8560, etc.) and the second is + "fsl,eloplus-dma-channel" + - cell-index : dma channel index starts at 0. + - reg : + - interrupts : + - interrupt-parent : optional, if needed for interrupt mapping + +Example: + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; + reg = <21300 4>; + ranges = <0 21100 200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <0 80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <14 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <80 80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <15 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <100 80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; + reg = <180 80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <17 2>; + }; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/gtm.txt b/Documentation/powerpc/dts-bindings/fsl/gtm.txt new file mode 100644 index 000000000000..9a33efded4bc --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/gtm.txt @@ -0,0 +1,31 @@ +* Freescale General-purpose Timers Module + +Required properties: + - compatible : should be + "fsl,-gtm", "fsl,gtm" for SOC GTMs + "fsl,-qe-gtm", "fsl,qe-gtm", "fsl,gtm" for QE GTMs + "fsl,-cpm2-gtm", "fsl,cpm2-gtm", "fsl,gtm" for CPM2 GTMs + - reg : should contain gtm registers location and length (0x40). + - interrupts : should contain four interrupts. + - interrupt-parent : interrupt source phandle. + - clock-frequency : specifies the frequency driving the timer. + +Example: + +timer@500 { + compatible = "fsl,mpc8360-gtm", "fsl,gtm"; + reg = <0x500 0x40>; + interrupts = <90 8 78 8 84 8 72 8>; + interrupt-parent = <&ipic>; + /* filled by u-boot */ + clock-frequency = <0>; +}; + +timer@440 { + compatible = "fsl,mpc8360-qe-gtm", "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + /* filled by u-boot */ + clock-frequency = <0>; +}; diff --git a/Documentation/powerpc/dts-bindings/fsl/guts.txt b/Documentation/powerpc/dts-bindings/fsl/guts.txt new file mode 100644 index 000000000000..9e7a2417dac5 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/guts.txt @@ -0,0 +1,25 @@ +* Global Utilities Block + +The global utilities block controls power management, I/O device +enabling, power-on-reset configuration monitoring, general-purpose +I/O signal configuration, alternate function selection for multiplexed +signals, and clock control. + +Required properties: + + - compatible : Should define the compatible device type for + global-utilities. + - reg : Offset and length of the register set for the device. + +Recommended properties: + + - fsl,has-rstcr : Indicates that the global utilities register set + contains a functioning "reset control register" (i.e. the board + is wired to reset upon setting the HRESET_REQ bit in this register). + +Example: + global-utilities@e0000 { /* global utilities block */ + compatible = "fsl,mpc8548-guts"; + reg = ; + fsl,has-rstcr; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt new file mode 100644 index 000000000000..d0ab33e21fe6 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt @@ -0,0 +1,32 @@ +* I2C + +Required properties : + + - device_type : Should be "i2c" + - reg : Offset and length of the register set for the device + +Recommended properties : + + - compatible : Should be "fsl-i2c" for parts compatible with + Freescale I2C specifications. + - interrupts : where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + - dfsrr : boolean; if defined, indicates that this I2C device has + a digital filter sampling rate register + - fsl5200-clocking : boolean; if defined, indicated that this device + uses the FSL 5200 clocking mechanism. + +Example : + i2c@3000 { + interrupt-parent = <40000>; + interrupts = <1b 3>; + reg = <3000 18>; + device_type = "i2c"; + compatible = "fsl-i2c"; + dfsrr; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/lbc.txt b/Documentation/powerpc/dts-bindings/fsl/lbc.txt new file mode 100644 index 000000000000..3300fec501c5 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/lbc.txt @@ -0,0 +1,35 @@ +* Chipselect/Local Bus + +Properties: +- name : Should be localbus +- #address-cells : Should be either two or three. The first cell is the + chipselect number, and the remaining cells are the + offset into the chipselect. +- #size-cells : Either one or two, depending on how large each chipselect + can be. +- ranges : Each range corresponds to a single chipselect, and cover + the entire access window as configured. + +Example: + localbus@f0010100 { + compatible = "fsl,mpc8272-localbus", + "fsl,pq2-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = ; + + ranges = <0 0 fe000000 02000000 + 1 0 f4500000 00008000>; + + flash@0,0 { + compatible = "jedec-flash"; + reg = <0 0 2000000>; + bank-width = <4>; + device-width = <1>; + }; + + board-control@1,0 { + reg = <1 0 20>; + compatible = "fsl,mpc8272ads-bcsr"; + }; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt new file mode 100644 index 000000000000..b26b91992c55 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/msi-pic.txt @@ -0,0 +1,36 @@ +* Freescale MSI interrupt controller + +Reguired properities: +- compatible : compatible list, contains 2 entries, + first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, + etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on + the parent type. +- reg : should contain the address and the length of the shared message + interrupt register set. +- msi-available-ranges: use style section to define which + msi interrupt can be used in the 256 msi interrupts. This property is + optional, without this, all the 256 MSI interrupts can be used. +- interrupts : each one of the interrupts here is one entry per 32 MSIs, + and routed to the host interrupt controller. the interrupts should + be set as edge sensitive. +- interrupt-parent: the phandle for the interrupt controller + that services interrupts for this device. for 83xx cpu, the interrupts + are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed + to MPIC. + +Example: + msi@41600 { + compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/sata.txt b/Documentation/powerpc/dts-bindings/fsl/sata.txt new file mode 100644 index 000000000000..b46bcf46c3d8 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/sata.txt @@ -0,0 +1,29 @@ +* Freescale 8xxx/3.0 Gb/s SATA nodes + +SATA nodes are defined to describe on-chip Serial ATA controllers. +Each SATA port should have its own node. + +Required properties: +- compatible : compatible list, contains 2 entries, first is + "fsl,CHIP-sata", where CHIP is the processor + (mpc8315, mpc8379, etc.) and the second is + "fsl,pq-sata" +- interrupts : +- cell-index : controller index. + 1 for controller @ 0x18000 + 2 for controller @ 0x19000 + 3 for controller @ 0x1a000 + 4 for controller @ 0x1b000 + +Optional properties: +- interrupt-parent : optional, if needed for interrupt mapping +- reg : + +Example: + sata@18000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <2c 8>; + interrupt-parent = < &ipic >; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/spi.txt b/Documentation/powerpc/dts-bindings/fsl/spi.txt new file mode 100644 index 000000000000..e7d9a344c4f4 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/spi.txt @@ -0,0 +1,24 @@ +* SPI (Serial Peripheral Interface) + +Required properties: +- cell-index : SPI controller index. +- compatible : should be "fsl,spi". +- mode : the SPI operation mode, it can be "cpu" or "cpu-qe". +- reg : Offset and length of the register set for the device +- interrupts : where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Example: + spi@4c0 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <4c0 40>; + interrupts = <82 0>; + interrupt-parent = <700>; + mode = "cpu"; + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/ssi.txt b/Documentation/powerpc/dts-bindings/fsl/ssi.txt new file mode 100644 index 000000000000..d100555d488a --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/ssi.txt @@ -0,0 +1,38 @@ +Freescale Synchronous Serial Interface + +The SSI is a serial device that communicates with audio codecs. It can +be programmed in AC97, I2S, left-justified, or right-justified modes. + +Required properties: +- compatible : compatible list, containing "fsl,ssi" +- cell-index : the SSI, <0> = SSI1, <1> = SSI2, and so on +- reg : offset and length of the register set for the device +- interrupts : where a is the interrupt number and b is a + field that represents an encoding of the sense and + level information for the interrupt. This should be + encoded based on the information in section 2) + depending on the type of interrupt controller you + have. +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. +- fsl,mode : the operating mode for the SSI interface + "i2s-slave" - I2S mode, SSI is clock slave + "i2s-master" - I2S mode, SSI is clock master + "lj-slave" - left-justified mode, SSI is clock slave + "lj-master" - l.j. mode, SSI is clock master + "rj-slave" - right-justified mode, SSI is clock slave + "rj-master" - r.j., SSI is clock master + "ac97-slave" - AC97 mode, SSI is clock slave + "ac97-master" - AC97 mode, SSI is clock master + +Optional properties: +- codec-handle : phandle to a 'codec' node that defines an audio + codec connected to this SSI. This node is typically + a child of an I2C or other control node. + +Child 'codec' node required properties: +- compatible : compatible list, contains the name of the codec + +Child 'codec' node optional properties: +- clock-frequency : The frequency of the input clock, which typically + comes from an on-board dedicated oscillator. diff --git a/Documentation/powerpc/dts-bindings/fsl/tsec.txt b/Documentation/powerpc/dts-bindings/fsl/tsec.txt new file mode 100644 index 000000000000..583ef6b56c43 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/tsec.txt @@ -0,0 +1,69 @@ +* MDIO IO device + +The MDIO is a bus to which the PHY devices are connected. For each +device that exists on this bus, a child node should be created. See +the definition of the PHY node below for an example of how to define +a PHY. + +Required properties: + - reg : Offset and length of the register set for the device + - compatible : Should define the compatible device type for the + mdio. Currently, this is most likely to be "fsl,gianfar-mdio" + +Example: + + mdio@24520 { + reg = <24520 20>; + compatible = "fsl,gianfar-mdio"; + + ethernet-phy@0 { + ...... + }; + }; + + +* Gianfar-compatible ethernet nodes + +Required properties: + + - device_type : Should be "network" + - model : Model of the device. Can be "TSEC", "eTSEC", or "FEC" + - compatible : Should be "gianfar" + - reg : Offset and length of the register set for the device + - mac-address : List of bytes representing the ethernet address of + this controller + - interrupts : where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + - phy-handle : The phandle for the PHY connected to this ethernet + controller. + - fixed-link : where a is emulated phy id - choose any, + but unique to the all specified fixed-links, b is duplex - 0 half, + 1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no + pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause. + +Recommended properties: + + - phy-connection-type : a string naming the controller/PHY interface type, + i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii", + "tbi", or "rtbi". This property is only really needed if the connection + is of type "rgmii-id", as all other connection types are detected by + hardware. + + +Example: + ethernet@24000 { + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = ; + interrupt-parent = <40000>; + phy-handle = <2452000> + }; diff --git a/Documentation/powerpc/dts-bindings/fsl/usb.txt b/Documentation/powerpc/dts-bindings/fsl/usb.txt new file mode 100644 index 000000000000..b00152402694 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/usb.txt @@ -0,0 +1,59 @@ +Freescale SOC USB controllers + +The device node for a USB controller that is part of a Freescale +SOC is as described in the document "Open Firmware Recommended +Practice : Universal Serial Bus" with the following modifications +and additions : + +Required properties : + - compatible : Should be "fsl-usb2-mph" for multi port host USB + controllers, or "fsl-usb2-dr" for dual role USB controllers + - phy_type : For multi port host USB controllers, should be one of + "ulpi", or "serial". For dual role USB controllers, should be + one of "ulpi", "utmi", "utmi_wide", or "serial". + - reg : Offset and length of the register set for the device + - port0 : boolean; if defined, indicates port0 is connected for + fsl-usb2-mph compatible controllers. Either this property or + "port1" (or both) must be defined for "fsl-usb2-mph" compatible + controllers. + - port1 : boolean; if defined, indicates port1 is connected for + fsl-usb2-mph compatible controllers. Either this property or + "port0" (or both) must be defined for "fsl-usb2-mph" compatible + controllers. + - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible + controllers. Can be "host", "peripheral", or "otg". Default to + "host" if not defined for backward compatibility. + +Recommended properties : + - interrupts : where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. + - interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Example multi port host USB controller device node : + usb@22000 { + compatible = "fsl-usb2-mph"; + reg = <22000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <27 1>; + phy_type = "ulpi"; + port0; + port1; + }; + +Example dual role USB controller device node : + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 1>; + dr_mode = "otg"; + phy = "ulpi"; + }; -- cgit v1.2.3 From 3fd44736db9a5bf33e4a216b9cd43c9cfd57c459 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Tue, 8 Jul 2008 19:13:33 -0500 Subject: powerpc/fsl: update crypto node definition and device tree instances delete obsolete device-type property, delete model property (use compatible property instead), prepend "fsl," to Freescale specific properties. Add nodes to device trees that are missing them, and fix broken property values in other trees. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- Documentation/powerpc/dts-bindings/fsl/sec.txt | 68 ++++++++++++++++++++++++++ arch/powerpc/boot/dts/mpc8272ads.dts | 21 +++----- arch/powerpc/boot/dts/mpc8313erdb.dts | 15 +++--- arch/powerpc/boot/dts/mpc8315erdb.dts | 15 +++--- arch/powerpc/boot/dts/mpc832x_mds.dts | 15 +++--- arch/powerpc/boot/dts/mpc832x_rdb.dts | 15 +++--- arch/powerpc/boot/dts/mpc8349emitx.dts | 12 ++--- arch/powerpc/boot/dts/mpc8349emitxgp.dts | 12 ++--- arch/powerpc/boot/dts/mpc834x_mds.dts | 15 ++---- arch/powerpc/boot/dts/mpc836x_mds.dts | 13 ++--- arch/powerpc/boot/dts/mpc8377_mds.dts | 13 +++-- arch/powerpc/boot/dts/mpc8377_rdb.dts | 14 +++--- arch/powerpc/boot/dts/mpc8378_mds.dts | 13 +++-- arch/powerpc/boot/dts/mpc8378_rdb.dts | 14 +++--- arch/powerpc/boot/dts/mpc8379_mds.dts | 13 +++-- arch/powerpc/boot/dts/mpc8379_rdb.dts | 14 +++--- arch/powerpc/boot/dts/mpc8536ds.dts | 12 +++++ arch/powerpc/boot/dts/mpc8541cds.dts | 11 +++++ arch/powerpc/boot/dts/mpc8544ds.dts | 11 +++++ arch/powerpc/boot/dts/mpc8548cds.dts | 11 +++++ arch/powerpc/boot/dts/mpc8555cds.dts | 11 +++++ arch/powerpc/boot/dts/mpc8568mds.dts | 14 +++--- arch/powerpc/boot/dts/mpc8572ds.dts | 12 +++++ arch/powerpc/boot/dts/sbc8349.dts | 14 ++---- arch/powerpc/boot/dts/sbc8548.dts | 11 +++++ arch/powerpc/boot/dts/tqm8541.dts | 11 +++++ arch/powerpc/boot/dts/tqm8555.dts | 11 +++++ 27 files changed, 268 insertions(+), 143 deletions(-) create mode 100644 Documentation/powerpc/dts-bindings/fsl/sec.txt diff --git a/Documentation/powerpc/dts-bindings/fsl/sec.txt b/Documentation/powerpc/dts-bindings/fsl/sec.txt new file mode 100644 index 000000000000..2b6f2d45c45a --- /dev/null +++ b/Documentation/powerpc/dts-bindings/fsl/sec.txt @@ -0,0 +1,68 @@ +Freescale SoC SEC Security Engines + +Required properties: + +- compatible : Should contain entries for this and backward compatible + SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0" +- reg : Offset and length of the register set for the device +- interrupts : the SEC's interrupt number +- fsl,num-channels : An integer representing the number of channels + available. +- fsl,channel-fifo-len : An integer representing the number of + descriptor pointers each channel fetch fifo can hold. +- fsl,exec-units-mask : The bitmask representing what execution units + (EUs) are available. It's a single 32-bit cell. EU information + should be encoded following the SEC's Descriptor Header Dword + EU_SEL0 field documentation, i.e. as follows: + + bit 0 = reserved - should be 0 + bit 1 = set if SEC has the ARC4 EU (AFEU) + bit 2 = set if SEC has the DES/3DES EU (DEU) + bit 3 = set if SEC has the message digest EU (MDEU/MDEU-A) + bit 4 = set if SEC has the random number generator EU (RNG) + bit 5 = set if SEC has the public key EU (PKEU) + bit 6 = set if SEC has the AES EU (AESU) + bit 7 = set if SEC has the Kasumi EU (KEU) + bit 8 = set if SEC has the CRC EU (CRCU) + bit 11 = set if SEC has the message digest EU extended alg set (MDEU-B) + +remaining bits are reserved for future SEC EUs. + +- fsl,descriptor-types-mask : The bitmask representing what descriptors + are available. It's a single 32-bit cell. Descriptor type information + should be encoded following the SEC's Descriptor Header Dword DESC_TYPE + field documentation, i.e. as follows: + + bit 0 = set if SEC supports the aesu_ctr_nonsnoop desc. type + bit 1 = set if SEC supports the ipsec_esp descriptor type + bit 2 = set if SEC supports the common_nonsnoop desc. type + bit 3 = set if SEC supports the 802.11i AES ccmp desc. type + bit 4 = set if SEC supports the hmac_snoop_no_afeu desc. type + bit 5 = set if SEC supports the srtp descriptor type + bit 6 = set if SEC supports the non_hmac_snoop_no_afeu desc.type + bit 7 = set if SEC supports the pkeu_assemble descriptor type + bit 8 = set if SEC supports the aesu_key_expand_output desc.type + bit 9 = set if SEC supports the pkeu_ptmul descriptor type + bit 10 = set if SEC supports the common_nonsnoop_afeu desc. type + bit 11 = set if SEC supports the pkeu_ptadd_dbl descriptor type + + ..and so on and so forth. + +Optional properties: + +- interrupt-parent : the phandle for the interrupt controller that + services interrupts for this device. + +Example: + + /* MPC8548E */ + crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <29 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; + }; diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index d27f8a73c24a..2a1929acaabd 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -237,22 +237,15 @@ compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic"; }; -/* May need to remove if on a part without crypto engine */ crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "fsl,mpc8272-talitos-sec2", - "fsl,talitos-sec2", - "fsl,talitos", - "talitos"; - reg = <0x30000 0x10000>; - interrupts = <11 8>; + compatible = "fsl,sec1.0"; + reg = <0x40000 0x13000>; + interrupts = <47 0x8>; interrupt-parent = <&PIC>; - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x7e>; -/* desc mask is for rev1.x, we need runtime fixup for >=2.x */ - descriptor-types-mask = <0x1010ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x1010415>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index b2068430a06d..3664fb584026 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -254,17 +254,14 @@ }; crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <0x30000 0x7000>; + compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - /* Rev. 2.2 */ - num-channels = <1>; - channel-fifo-len = <24>; - exec-units-mask = <0x0000004c>; - descriptor-types-mask = <0x0122003f>; + fsl,num-channels = <1>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x4c>; + fsl,descriptor-types-mask = <0x0122003f>; }; /* IPIC diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index a40e8064d429..f704513fb930 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -241,17 +241,16 @@ }; crypto@30000 { - model = "SEC3"; - device_type = "crypto"; - compatible = "talitos"; + compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - /* Rev. 3.0 geometry */ - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x000001fe>; - descriptor-types-mask = <0x03ab0ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x97c>; + fsl,descriptor-types-mask = <0x3ab0abf>; }; sata@18000 { diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index b5968b6c8a29..7345743d3d96 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -150,17 +150,14 @@ }; crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <0x30000 0x7000>; + compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - /* Rev. 2.2 */ - num-channels = <1>; - channel-fifo-len = <24>; - exec-units-mask = <0x0000004c>; - descriptor-types-mask = <0x0122003f>; + fsl,num-channels = <1>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x4c>; + fsl,descriptor-types-mask = <0x0122003f>; }; ipic: pic@700 { diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index a798d8639a7d..e74c045a0f8c 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -128,17 +128,14 @@ }; crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <0x30000 0x7000>; + compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - /* Rev. 2.2 */ - num-channels = <1>; - channel-fifo-len = <24>; - exec-units-mask = <0x0000004c>; - descriptor-types-mask = <0x0122003f>; + fsl,num-channels = <1>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x4c>; + fsl,descriptor-types-mask = <0x0122003f>; }; ipic:pic@700 { diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index fc0f4c918c76..8dfab5662585 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -213,16 +213,14 @@ }; crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; + compatible = "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x0000007e>; - descriptor-types-mask = <0x01010ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; }; ipic: pic@700 { diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index e6afb1d1e19e..49ca3497eefb 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -186,16 +186,14 @@ }; crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; + compatible = "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x0000007e>; - descriptor-types-mask = <0x01010ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; }; ipic: pic@700 { diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index 9c75c7c69e21..ba586cb7afbb 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -228,20 +228,15 @@ interrupt-parent = <&ipic>; }; - /* May need to remove if on a part without crypto engine */ crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; + compatible = "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x0000007e>; - /* desc mask is for rev2.0, - * we need runtime fixup for >2.0 */ - descriptor-types-mask = <0x01010ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; }; /* IPIC diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 8e33b155f112..3701dae1ee02 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -154,17 +154,14 @@ }; crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; + compatible = "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x0000007e>; - /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ - descriptor-types-mask = <0x01010ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; }; ipic: pic@700 { diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 49a38cb95b52..0a700cb5f611 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -269,16 +269,15 @@ }; crypto@30000 { - model = "SEC3"; - compatible = "talitos"; + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - /* Rev. 3.0 geometry */ - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x000001fe>; - descriptor-types-mask = <0x03ab0ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; }; sdhc@2e000 { diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 1f4538790302..ed137aa83d5f 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -248,17 +248,15 @@ }; crypto@30000 { - model = "SEC3"; - device_type = "crypto"; - compatible = "talitos"; + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - /* Rev. 3.0 geometry */ - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x000001fe>; - descriptor-types-mask = <0x03ab0ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; }; sata@18000 { diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index 99ad49d4f13f..29c8c76a58f7 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -269,16 +269,15 @@ }; crypto@30000 { - model = "SEC3"; - compatible = "talitos"; + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - /* Rev. 3.0 geometry */ - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x000001fe>; - descriptor-types-mask = <0x03ab0ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; }; sdhc@2e000 { diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 44e34d3f21cf..34a7f2f935e1 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -248,17 +248,15 @@ }; crypto@30000 { - model = "SEC3"; - device_type = "crypto"; - compatible = "talitos"; + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - /* Rev. 3.0 geometry */ - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x000001fe>; - descriptor-types-mask = <0x03ab0ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; }; /* IPIC diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index 980be8136276..d641a8985ea3 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -269,16 +269,15 @@ }; crypto@30000 { - model = "SEC3"; - compatible = "talitos"; + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - /* Rev. 3.0 geometry */ - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x000001fe>; - descriptor-types-mask = <0x03ab0ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; }; sdhc@2e000 { diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index eeedf5884881..e4d7030d50e5 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -248,17 +248,15 @@ }; crypto@30000 { - model = "SEC3"; - device_type = "crypto"; - compatible = "talitos"; + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - /* Rev. 3.0 geometry */ - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x000001fe>; - descriptor-types-mask = <0x03ab0ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; }; sata@18000 { diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 98ad27a2ddee..02cfa24a1695 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -231,6 +231,18 @@ interrupt-parent = <&mpic>; }; + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + sata@18000 { compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 21ad71b825c1..c4469f19ff82 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -189,6 +189,17 @@ interrupt-parent = <&mpic>; }; + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + mpic: pic@40000 { interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 6cf533f4b5fb..7d3829d3495e 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -210,6 +210,17 @@ fsl,has-rstcr; }; + crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; + }; + mpic: pic@40000 { interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index d1fa6bbfaea0..d84466bb7eca 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -249,6 +249,17 @@ fsl,has-rstcr; }; + crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; + }; + mpic: pic@40000 { interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 6fc8059b5a01..e03a78006283 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -189,6 +189,17 @@ interrupt-parent = <&mpic>; }; + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + mpic: pic@40000 { interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index be9a289c0d62..9c30a34821dc 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -231,16 +231,14 @@ }; crypto@30000 { - device_type = "crypto"; - model = "SEC2"; - compatible = "talitos"; - reg = <0x30000 0xf000>; + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; interrupts = <45 2>; interrupt-parent = <&mpic>; - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0xfe>; - descriptor-types-mask = <0x12b0ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; }; mpic: pic@40000 { diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index cb06325f0b79..08c61e3daecc 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -321,6 +321,18 @@ interrupt-parent = <&mpic>; }; + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + mpic: pic@40000 { interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts index 5b76bb26085a..45f789b56709 100644 --- a/arch/powerpc/boot/dts/sbc8349.dts +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -221,19 +221,15 @@ interrupt-parent = <&ipic>; }; - /* May need to remove if on a part without crypto engine */ crypto@30000 { - model = "SEC2"; - compatible = "talitos"; + compatible = "fsl,sec2.0"; reg = <0x30000 0x10000>; interrupts = <11 0x8>; interrupt-parent = <&ipic>; - num-channels = <4>; - channel-fifo-len = <24>; - exec-units-mask = <0x0000007e>; - /* desc mask is for rev2.0, - * we need runtime fixup for >2.0 */ - descriptor-types-mask = <0x01010ebf>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; }; /* IPIC diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 21cbacb1000c..333552b4e90d 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -304,6 +304,17 @@ fsl,has-rstcr; }; + crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; + }; + mpic: pic@40000 { interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index d083a648a81d..d76441ec5dc7 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -200,6 +200,17 @@ interrupt-parent = <&mpic>; }; + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + mpic: pic@40000 { interrupt-controller; #address-cells = <0>; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index 96b0b94ad925..6f7ea59c4846 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -200,6 +200,17 @@ interrupt-parent = <&mpic>; }; + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + mpic: pic@40000 { interrupt-controller; #address-cells = <0>; -- cgit v1.2.3 From 1c776bf87c855a6e823e13c3667f0cf7c14635bd Mon Sep 17 00:00:00 2001 From: Krzysztof Oledzki Date: Wed, 4 Jun 2008 03:40:17 +0200 Subject: x86: add another PCI ID for ICH6 force-hpet Tested on Asus P5GDC-V $ lspci -n -n |grep ISA 00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03) Force enabled HPET at base address 0xfed00000 hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Signed-off-by: Krzysztof Piotr Oledzki Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index d89a648fe710..06e1fd6be835 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -158,6 +158,8 @@ static void ich_force_enable_hpet(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, ich_force_enable_hpet); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, + ich_force_enable_hpet); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, ich_force_enable_hpet); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, -- cgit v1.2.3 From 4c2a997c34c0aa952ba9c247b0c2043526054919 Mon Sep 17 00:00:00 2001 From: Joe Buehler Date: Mon, 9 Jun 2008 08:55:20 -0400 Subject: x86: add PCI ID for 6300ESB force hpet 00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02) 00:1f.0 Class 0601: 8086:25a1 (rev 02) kernel: pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 kernel: hpet clockevent registered kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 kernel: hpet0: 3 64-bit timers, 14318180 Hz Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner --- arch/x86/kernel/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c index 06e1fd6be835..f327abafe3e6 100644 --- a/arch/x86/kernel/quirks.c +++ b/arch/x86/kernel/quirks.c @@ -257,6 +257,8 @@ static void old_ich_force_enable_hpet_user(struct pci_dev *dev) old_ich_force_enable_hpet(dev); } +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, + old_ich_force_enable_hpet_user); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, old_ich_force_enable_hpet_user); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, -- cgit v1.2.3 From 7798ed0f57b4d137e660fbf5be1e1528e40f89ac Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 14 Jul 2008 19:55:03 +1000 Subject: generic-ipi: powerpc/generic-ipi tree build failure Today's linux-next build (powerpc allmodconfig) failed like this: ERROR: ".save_stack_trace" [tests/backtracetest.ko] undefined! But save_stack_trace is exported in arch/powerpc/kernel/stacktrace.c I couldn't figure it out until I noticed these earlier warnings: arch/powerpc/kernel/stacktrace.c:47: warning: data definition has no type or storage class arch/powerpc/kernel/stacktrace.c:47: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/powerpc/kernel/stacktrace.c:47: warning: parameter names (without types) in function declaration I applied the patch below. Signed-off-by: Stephen Rothwell Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: Signed-off-by: Ingo Molnar --- arch/powerpc/kernel/stacktrace.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c index 9861f17258da..3cf0d94ba340 100644 --- a/arch/powerpc/kernel/stacktrace.c +++ b/arch/powerpc/kernel/stacktrace.c @@ -12,6 +12,7 @@ #include #include +#include #include /* -- cgit v1.2.3 From ae8547b0a9e5d718ce272ddc48f91703a0f52a0b Mon Sep 17 00:00:00 2001 From: Hans Reiser Date: Wed, 7 May 2008 15:48:57 +0300 Subject: VFS: move inode_lock into sync_sb_inodes This patch makes 'sync_sb_inodes()' lock 'inode_lock', rather than expect that the caller will do this. This change was previously done by Hans Reiser and sat in the -mm tree. Signed-off-by: Artem Bityutskiy --- fs/fs-writeback.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index ae45f77765c0..16519fe1399c 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -424,8 +424,6 @@ __writeback_single_inode(struct inode *inode, struct writeback_control *wbc) * WB_SYNC_HOLD is a hack for sys_sync(): reattach the inode to sb->s_dirty so * that it can be located for waiting on in __writeback_single_inode(). * - * Called under inode_lock. - * * If `bdi' is non-zero then we're being asked to writeback a specific queue. * This function assumes that the blockdev superblock's inodes are backed by * a variety of queues, so all inodes are searched. For other superblocks, @@ -446,6 +444,7 @@ sync_sb_inodes(struct super_block *sb, struct writeback_control *wbc) { const unsigned long start = jiffies; /* livelock avoidance */ + spin_lock(&inode_lock); if (!wbc->for_kupdate || list_empty(&sb->s_io)) queue_io(sb, wbc->older_than_this); @@ -524,6 +523,7 @@ sync_sb_inodes(struct super_block *sb, struct writeback_control *wbc) if (!list_empty(&sb->s_more_io)) wbc->more_io = 1; } + spin_unlock(&inode_lock); return; /* Leave any unwritten inodes on s_io */ } @@ -565,11 +565,8 @@ restart: * be unmounted by the time it is released. */ if (down_read_trylock(&sb->s_umount)) { - if (sb->s_root) { - spin_lock(&inode_lock); + if (sb->s_root) sync_sb_inodes(sb, wbc); - spin_unlock(&inode_lock); - } up_read(&sb->s_umount); } spin_lock(&sb_lock); @@ -607,9 +604,7 @@ void sync_inodes_sb(struct super_block *sb, int wait) (inodes_stat.nr_inodes - inodes_stat.nr_unused) + nr_dirty + nr_unstable; wbc.nr_to_write += wbc.nr_to_write / 2; /* Bit more for luck */ - spin_lock(&inode_lock); sync_sb_inodes(sb, &wbc); - spin_unlock(&inode_lock); } /* -- cgit v1.2.3 From 4ee6afd34409d296782a5b667d7991b1050e910a Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 7 May 2008 21:01:30 +0300 Subject: VFS: export sync_sb_inodes This patch exports the 'sync_sb_inodes()' which is needed for UBIFS because it has to force write-back from time to time. Namely, the UBIFS budgeting subsystem forces write-back when its pessimistic callculations show that there is no free space on the media. Signed-off-by: Artem Bityutskiy --- fs/fs-writeback.c | 11 +++++++++-- include/linux/fs.h | 2 ++ 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 16519fe1399c..25adfc3c693a 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -439,8 +439,8 @@ __writeback_single_inode(struct inode *inode, struct writeback_control *wbc) * on the writer throttling path, and we get decent balancing between many * throttled threads: we don't want them all piling up on inode_sync_wait. */ -static void -sync_sb_inodes(struct super_block *sb, struct writeback_control *wbc) +void generic_sync_sb_inodes(struct super_block *sb, + struct writeback_control *wbc) { const unsigned long start = jiffies; /* livelock avoidance */ @@ -526,6 +526,13 @@ sync_sb_inodes(struct super_block *sb, struct writeback_control *wbc) spin_unlock(&inode_lock); return; /* Leave any unwritten inodes on s_io */ } +EXPORT_SYMBOL_GPL(generic_sync_sb_inodes); + +static void sync_sb_inodes(struct super_block *sb, + struct writeback_control *wbc) +{ + generic_sync_sb_inodes(sb, wbc); +} /* * Start writeback of dirty pagecache data against all unlocked inodes. diff --git a/include/linux/fs.h b/include/linux/fs.h index d8e2762ed14d..f9d2aab47eda 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1729,6 +1729,8 @@ static inline void invalidate_remote_inode(struct inode *inode) extern int invalidate_inode_pages2(struct address_space *mapping); extern int invalidate_inode_pages2_range(struct address_space *mapping, pgoff_t start, pgoff_t end); +extern void generic_sync_sb_inodes(struct super_block *sb, + struct writeback_control *wbc); extern int write_inode_now(struct inode *, int); extern int filemap_fdatawrite(struct address_space *); extern int filemap_flush(struct address_space *); -- cgit v1.2.3 From 2d62f488585405bc9108c47cb06957397cfd1059 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 31 Jan 2008 17:25:00 +0200 Subject: do_mounts: allow UBI root device name Similarly to MTD devices, allow UBI devices. Signed-off-by: Adrian Hunter --- init/do_mounts.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/init/do_mounts.c b/init/do_mounts.c index 660c1e50c91b..a1de1bf3d6b9 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -372,7 +372,8 @@ void __init prepare_namespace(void) if (saved_root_name[0]) { root_device_name = saved_root_name; - if (!strncmp(root_device_name, "mtd", 3)) { + if (!strncmp(root_device_name, "mtd", 3) || + !strncmp(root_device_name, "ubi", 3)) { mount_block_root(root_device_name, root_mountflags); goto out; } -- cgit v1.2.3 From 3bf2e77453a87c22eb57ed4926760ac131c84459 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Sun, 13 Jul 2008 21:18:02 -0700 Subject: x86, suspend, acpi: enter Big Real Mode The explanation for recent video BIOS suspend quirk failures is that the VESA BIOS expects to be entered in Big Real Mode (*.limit = 0xffffffff) instead of ordinary Real Mode (*.limit = 0xffff). This patch changes the segment descriptors to Big Real Mode instead. The segment descriptor registers (what Intel calls "segment cache") is always active. The only thing that changes based on CR0.PE is how it is *loaded* and the interpretation of the CS flags. The segment descriptor registers contain of the following sub-registers: selector (the "visible" part), base, limit and flags. In protected mode or long mode, they are loaded from descriptors (or fs.base or gs.base can be manipulated directly in long mode.) In real mode, the only thing changed by a segment register load is the selector and the base, where the base <- selector << 4. In particular, *the limit and the flags are not changed*. As far as the handling of the CS flags: a code segment cannot be writable in protected mode, whereas it is "just another segment" in real mode, so there is some kind of quirk that kicks in for this when CR0.PE <- 0. I'm not sure if this is accomplished by actually changing the cs.flags register or just changing the interpretation; it might be something that is CPU-specific. In particular, the Transmeta CPUs had an explicit "CS is writable if you're in real mode" override, so even if you had loaded CS with an execute-only segment it'd be writable (but not readable!) on return to real mode. I'm not at all sure if that is how other CPUs behave. Signed-off-by: "H. Peter Anvin" Signed-off-by: Ingo Molnar --- arch/x86/kernel/acpi/sleep.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 36af01f029ed..130711f1454b 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -23,6 +23,15 @@ static unsigned long acpi_realmode; static char temp_stack[10240]; #endif +/* XXX: this macro should move to asm-x86/segment.h and be shared with the + boot code... */ +#define GDT_ENTRY(flags, base, limit) \ + (((u64)(base & 0xff000000) << 32) | \ + ((u64)flags << 40) | \ + ((u64)(limit & 0x00ff0000) << 32) | \ + ((u64)(base & 0x00ffffff) << 16) | \ + ((u64)(limit & 0x0000ffff))) + /** * acpi_save_state_mem - save kernel state * @@ -58,11 +67,11 @@ int acpi_save_state_mem(void) ((char *)&header->wakeup_gdt - (char *)acpi_realmode)) << 16); /* GDT[1]: real-mode-like code segment */ - header->wakeup_gdt[1] = (0x009bULL << 40) + - ((u64)acpi_wakeup_address << 16) + 0xffff; + header->wakeup_gdt[1] = + GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff); /* GDT[2]: real-mode-like data segment */ - header->wakeup_gdt[2] = (0x0093ULL << 40) + - ((u64)acpi_wakeup_address << 16) + 0xffff; + header->wakeup_gdt[2] = + GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff); #ifndef CONFIG_64BIT store_gdt((struct desc_ptr *)&header->pmode_gdt); -- cgit v1.2.3 From 065cb3dfe24978651caedfa54da585388ad15dde Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 14 Jul 2008 11:44:26 -0700 Subject: x86, suspend, acpi: correct and add comments about Big Real Mode Explain that we set up the descriptors for Big Real Mode, and why we do so. In particular, one system that is known to fail without it is the Lenovo X61. Signed-off-by: H. Peter Anvin --- arch/x86/kernel/acpi/sleep.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 130711f1454b..41bb130c31db 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -60,16 +60,25 @@ int acpi_save_state_mem(void) header->video_mode = saved_video_mode; header->wakeup_jmp_seg = acpi_wakeup_address >> 4; + + /* + * Set up the wakeup GDT. We set these up as Big Real Mode, + * that is, with limits set to 4 GB. At least the Lenovo + * Thinkpad X61 is known to need this for the video BIOS + * initialization quirk to work; this is likely to also + * be the case for other laptops or integrated video devices. + */ + /* GDT[0]: GDT self-pointer */ header->wakeup_gdt[0] = (u64)(sizeof(header->wakeup_gdt) - 1) + ((u64)(acpi_wakeup_address + ((char *)&header->wakeup_gdt - (char *)acpi_realmode)) << 16); - /* GDT[1]: real-mode-like code segment */ + /* GDT[1]: big real mode-like code segment */ header->wakeup_gdt[1] = GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff); - /* GDT[2]: real-mode-like data segment */ + /* GDT[2]: big real mode-like data segment */ header->wakeup_gdt[2] = GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff); -- cgit v1.2.3 From 7daf705f362e349983e92037a198b8821db198af Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 14 Jul 2008 12:12:53 -0700 Subject: Start using the new '%pS' infrastructure to print symbols This simplifies the code significantly, and was the whole point of the exercise. Signed-off-by: Linus Torvalds --- arch/x86/kernel/traps_64.c | 25 +------------------------ mm/slub.c | 5 ++--- 2 files changed, 3 insertions(+), 27 deletions(-) diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index adff76ea97c4..f1a95d105953 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -104,30 +104,7 @@ int kstack_depth_to_print = 12; void printk_address(unsigned long address, int reliable) { -#ifdef CONFIG_KALLSYMS - unsigned long offset = 0, symsize; - const char *symname; - char *modname; - char *delim = ":"; - char namebuf[KSYM_NAME_LEN]; - char reliab[4] = ""; - - symname = kallsyms_lookup(address, &symsize, &offset, - &modname, namebuf); - if (!symname) { - printk(" [<%016lx>]\n", address); - return; - } - if (!reliable) - strcpy(reliab, "? "); - - if (!modname) - modname = delim = ""; - printk(" [<%016lx>] %s%s%s%s%s+0x%lx/0x%lx\n", - address, reliab, delim, modname, delim, symname, offset, symsize); -#else - printk(" [<%016lx>]\n", address); -#endif + printk(" [<%016lx>] %s%pS\n", address, reliable ? "": "? ", (void *) address); } static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, diff --git a/mm/slub.c b/mm/slub.c index 315c392253c7..5f6e2c4a2ba7 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -431,9 +431,8 @@ static void print_track(const char *s, struct track *t) if (!t->addr) return; - printk(KERN_ERR "INFO: %s in ", s); - __print_symbol("%s", (unsigned long)t->addr); - printk(" age=%lu cpu=%u pid=%d\n", jiffies - t->when, t->cpu, t->pid); + printk(KERN_ERR "INFO: %s in %pS age=%lu cpu=%u pid=%d\n", + s, t->addr, jiffies - t->when, t->cpu, t->pid); } static void print_tracking(struct kmem_cache *s, void *object) -- cgit v1.2.3 From 341c2c958ec7bdd9f54733a8b0b432fe76842a82 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 20 May 2008 02:17:51 +0900 Subject: libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 44 +++++++++++++++++++++----------------------- drivers/ata/libata-eh.c | 33 +++++++++++++++++---------------- drivers/ata/libata-pmp.c | 3 ++- drivers/ata/libata-sff.c | 15 ++++++++------- drivers/ata/pata_bf54x.c | 6 +++--- drivers/ata/pata_scc.c | 2 +- include/linux/libata.h | 26 ++++++++++++++++---------- 7 files changed, 68 insertions(+), 61 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 303fc0d2b978..c5c3b1b516e1 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -54,7 +54,6 @@ #include #include #include -#include #include #include #include @@ -145,7 +144,7 @@ static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CF module_param_named(dma, libata_dma_mask, int, 0444); MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)"); -static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ; +static int ata_probe_timeout = ATA_TMOUT_INTERNAL / 1000; module_param(ata_probe_timeout, int, 0444); MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); @@ -1533,7 +1532,7 @@ unsigned long ata_id_xfermask(const u16 *id) * @ap: The ata_port to queue port_task for * @fn: workqueue function to be scheduled * @data: data for @fn to use - * @delay: delay time for workqueue function + * @delay: delay time in msecs for workqueue function * * Schedule @fn(@data) for execution after @delay jiffies using * port_task. There is one port_task per port and it's the @@ -1552,7 +1551,7 @@ void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay) ap->port_task_data = data; /* may fail if ata_port_flush_task() in progress */ - queue_delayed_work(ata_wq, &ap->port_task, delay); + queue_delayed_work(ata_wq, &ap->port_task, msecs_to_jiffies(delay)); } /** @@ -1685,7 +1684,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, spin_unlock_irqrestore(ap->lock, flags); if (!timeout) - timeout = ata_probe_timeout * 1000 / HZ; + timeout = ata_probe_timeout * 1000; rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout)); @@ -3319,7 +3318,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline, int (*check_ready)(struct ata_link *link)) { unsigned long start = jiffies; - unsigned long nodev_deadline = start + ATA_TMOUT_FF_WAIT; + unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT); int warned = 0; if (time_after(nodev_deadline, deadline)) @@ -3387,7 +3386,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline, int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, int (*check_ready)(struct ata_link *link)) { - msleep(ATA_WAIT_AFTER_RESET_MSECS); + msleep(ATA_WAIT_AFTER_RESET); return ata_wait_ready(link, deadline, check_ready); } @@ -3417,13 +3416,13 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline, int sata_link_debounce(struct ata_link *link, const unsigned long *params, unsigned long deadline) { - unsigned long interval_msec = params[0]; - unsigned long duration = msecs_to_jiffies(params[1]); + unsigned long interval = params[0]; + unsigned long duration = params[1]; unsigned long last_jiffies, t; u32 last, cur; int rc; - t = jiffies + msecs_to_jiffies(params[2]); + t = ata_deadline(jiffies, params[2]); if (time_before(t, deadline)) deadline = t; @@ -3435,7 +3434,7 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params, last_jiffies = jiffies; while (1) { - msleep(interval_msec); + msleep(interval); if ((rc = sata_scr_read(link, SCR_STATUS, &cur))) return rc; cur &= 0xf; @@ -3444,7 +3443,8 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params, if (cur == last) { if (cur == 1 && time_before(jiffies, deadline)) continue; - if (time_after(jiffies, last_jiffies + duration)) + if (time_after(jiffies, + ata_deadline(last_jiffies, duration))) return 0; continue; } @@ -3636,7 +3636,8 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing, if (check_ready) { unsigned long pmp_deadline; - pmp_deadline = jiffies + ATA_TMOUT_PMP_SRST_WAIT; + pmp_deadline = ata_deadline(jiffies, + ATA_TMOUT_PMP_SRST_WAIT); if (time_after(pmp_deadline, deadline)) pmp_deadline = deadline; ata_wait_ready(link, pmp_deadline, check_ready); @@ -6073,8 +6074,6 @@ static void __init ata_parse_force_param(void) static int __init ata_init(void) { - ata_probe_timeout *= HZ; - ata_parse_force_param(); ata_wq = create_workqueue("ata"); @@ -6127,8 +6126,8 @@ int ata_ratelimit(void) * @reg: IO-mapped register * @mask: Mask to apply to read register value * @val: Wait condition - * @interval_msec: polling interval in milliseconds - * @timeout_msec: timeout in milliseconds + * @interval: polling interval in milliseconds + * @timeout: timeout in milliseconds * * Waiting for some bits of register to change is a common * operation for ATA controllers. This function reads 32bit LE @@ -6146,10 +6145,9 @@ int ata_ratelimit(void) * The final register value. */ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, - unsigned long interval_msec, - unsigned long timeout_msec) + unsigned long interval, unsigned long timeout) { - unsigned long timeout; + unsigned long deadline; u32 tmp; tmp = ioread32(reg); @@ -6158,10 +6156,10 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, * preceding writes reach the controller before starting to * eat away the timeout. */ - timeout = jiffies + (timeout_msec * HZ) / 1000; + deadline = ata_deadline(jiffies, timeout); - while ((tmp & mask) == val && time_before(jiffies, timeout)) { - msleep(interval_msec); + while ((tmp & mask) == val && time_before(jiffies, deadline)) { + msleep(interval); tmp = ioread32(reg); } diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 7894d83ea1eb..08dd07f10008 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -66,15 +66,14 @@ enum { ATA_ECAT_DUBIOUS_TOUT_HSM = 6, ATA_ECAT_DUBIOUS_UNK_DEV = 7, ATA_ECAT_NR = 8, -}; -/* Waiting in ->prereset can never be reliable. It's sometimes nice - * to wait there but it can't be depended upon; otherwise, we wouldn't - * be resetting. Just give it enough time for most drives to spin up. - */ -enum { - ATA_EH_PRERESET_TIMEOUT = 10 * HZ, - ATA_EH_FASTDRAIN_INTERVAL = 3 * HZ, + /* Waiting in ->prereset can never be reliable. It's + * sometimes nice to wait there but it can't be depended upon; + * otherwise, we wouldn't be resetting. Just give it enough + * time for most drives to spin up. + */ + ATA_EH_PRERESET_TIMEOUT = 10000, + ATA_EH_FASTDRAIN_INTERVAL = 3000, }; /* The following table determines how we sequence resets. Each entry @@ -84,10 +83,10 @@ enum { * are mostly for error handling, hotplug and retarded devices. */ static const unsigned long ata_eh_reset_timeouts[] = { - 10 * HZ, /* most drives spin up by 10sec */ - 10 * HZ, /* > 99% working drives spin up before 20sec */ - 35 * HZ, /* give > 30 secs of idleness for retarded devices */ - 5 * HZ, /* and sweet one last chance */ + 10000, /* most drives spin up by 10sec */ + 10000, /* > 99% working drives spin up before 20sec */ + 35000, /* give > 30 secs of idleness for retarded devices */ + 5000, /* and sweet one last chance */ /* > 1 min has elapsed, give up */ }; @@ -641,7 +640,7 @@ void ata_eh_fastdrain_timerfn(unsigned long arg) /* some qcs have finished, give it another chance */ ap->fastdrain_cnt = cnt; ap->fastdrain_timer.expires = - jiffies + ATA_EH_FASTDRAIN_INTERVAL; + ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL); add_timer(&ap->fastdrain_timer); } @@ -681,7 +680,8 @@ static void ata_eh_set_pending(struct ata_port *ap, int fastdrain) /* activate fast drain */ ap->fastdrain_cnt = cnt; - ap->fastdrain_timer.expires = jiffies + ATA_EH_FASTDRAIN_INTERVAL; + ap->fastdrain_timer.expires = + ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL); add_timer(&ap->fastdrain_timer); } @@ -2125,7 +2125,8 @@ int ata_eh_reset(struct ata_link *link, int classify, } if (prereset) { - rc = prereset(link, jiffies + ATA_EH_PRERESET_TIMEOUT); + rc = prereset(link, + ata_deadline(jiffies, ATA_EH_PRERESET_TIMEOUT)); if (rc) { if (rc == -ENOENT) { ata_link_printk(link, KERN_DEBUG, @@ -2160,7 +2161,7 @@ int ata_eh_reset(struct ata_link *link, int classify, if (ata_is_host_link(link)) ata_eh_freeze_port(ap); - deadline = jiffies + ata_eh_reset_timeouts[try++]; + deadline = ata_deadline(jiffies, ata_eh_reset_timeouts[try++]); if (reset) { if (verbose) diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 7daf4c0f6216..63691d77ac43 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -785,7 +785,8 @@ static int sata_pmp_eh_handle_disabled_links(struct ata_port *ap) * SError.N working. */ sata_link_hardreset(link, sata_deb_timing_normal, - jiffies + ATA_TMOUT_INTERNAL_QUICK, NULL, NULL); + ata_deadline(jiffies, ATA_TMOUT_INTERNAL_QUICK), + NULL, NULL); /* unconditionally clear SError.N */ rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index c0908c225483..304fdc6f1dc2 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -345,8 +345,8 @@ void ata_sff_dma_pause(struct ata_port *ap) /** * ata_sff_busy_sleep - sleep until BSY clears, or timeout * @ap: port containing status register to be polled - * @tmout_pat: impatience timeout - * @tmout: overall timeout + * @tmout_pat: impatience timeout in msecs + * @tmout: overall timeout in msecs * * Sleep until ATA Status register bit BSY clears, * or a timeout occurs. @@ -365,7 +365,7 @@ int ata_sff_busy_sleep(struct ata_port *ap, status = ata_sff_busy_wait(ap, ATA_BUSY, 300); timer_start = jiffies; - timeout = timer_start + tmout_pat; + timeout = ata_deadline(timer_start, tmout_pat); while (status != 0xff && (status & ATA_BUSY) && time_before(jiffies, timeout)) { msleep(50); @@ -377,7 +377,7 @@ int ata_sff_busy_sleep(struct ata_port *ap, "port is slow to respond, please be patient " "(Status 0x%x)\n", status); - timeout = timer_start + tmout; + timeout = ata_deadline(timer_start, tmout); while (status != 0xff && (status & ATA_BUSY) && time_before(jiffies, timeout)) { msleep(50); @@ -390,7 +390,7 @@ int ata_sff_busy_sleep(struct ata_port *ap, if (status & ATA_BUSY) { ata_port_printk(ap, KERN_ERR, "port failed to respond " "(%lu secs, Status 0x%x)\n", - tmout / HZ, status); + DIV_ROUND_UP(tmout, 1000), status); return -EBUSY; } @@ -1888,7 +1888,7 @@ int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask, unsigned int dev1 = devmask & (1 << 1); int rc, ret = 0; - msleep(ATA_WAIT_AFTER_RESET_MSECS); + msleep(ATA_WAIT_AFTER_RESET); /* always check readiness of the master device */ rc = ata_sff_wait_ready(link, deadline); @@ -2371,7 +2371,8 @@ void ata_bus_reset(struct ata_port *ap) /* issue bus reset */ if (ap->flags & ATA_FLAG_SRST) { - rc = ata_bus_softreset(ap, devmask, jiffies + 40 * HZ); + rc = ata_bus_softreset(ap, devmask, + ata_deadline(jiffies, 40000)); if (rc && rc != -ENODEV) goto err_out; } diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index 55516103626a..d3932901a3b3 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1011,7 +1011,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr; unsigned int dev0 = devmask & (1 << 0); unsigned int dev1 = devmask & (1 << 1); - unsigned long timeout; + unsigned long deadline; /* if device 0 was found in ata_devchk, wait for its * BSY bit to clear @@ -1022,7 +1022,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) /* if device 1 was found in ata_devchk, wait for * register access, then wait for BSY to clear */ - timeout = jiffies + ATA_TMOUT_BOOT; + deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT); while (dev1) { u8 nsect, lbal; @@ -1031,7 +1031,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask) lbal = read_atapi_register(base, ATA_REG_LBAL); if ((nsect == 1) && (lbal == 1)) break; - if (time_after(jiffies, timeout)) { + if (time_after(jiffies, deadline)) { dev1 = 0; break; } diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index bbf5aa345e68..16673d168573 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -696,7 +696,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc) if (reg & INTSTS_BMSINT) { unsigned int classes; - unsigned long deadline = jiffies + ATA_TMOUT_BOOT; + unsigned long deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT); printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME); out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT); /* TBD: SW reset */ diff --git a/include/linux/libata.h b/include/linux/libata.h index e57e5d08312d..94110b652b30 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -27,6 +27,7 @@ #define __LINUX_LIBATA_H__ #include +#include #include #include #include @@ -115,7 +116,7 @@ enum { /* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */ ATA_MAX_QUEUE = 32, ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1, - ATA_SHORT_PAUSE = (HZ >> 6) + 1, + ATA_SHORT_PAUSE = 16, ATAPI_MAX_DRAIN = 16 << 10, @@ -234,17 +235,17 @@ enum { /* bits 24:31 of host->flags are reserved for LLD specific flags */ /* various lengths of time */ - ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */ - ATA_TMOUT_BOOT_QUICK = 7 * HZ, /* heuristic */ - ATA_TMOUT_INTERNAL = 30 * HZ, - ATA_TMOUT_INTERNAL_QUICK = 5 * HZ, + ATA_TMOUT_BOOT = 30000, /* heuristic */ + ATA_TMOUT_BOOT_QUICK = 7000, /* heuristic */ + ATA_TMOUT_INTERNAL = 30000, + ATA_TMOUT_INTERNAL_QUICK = 5000, /* FIXME: GoVault needs 2s but we can't afford that without * parallel probing. 800ms is enough for iVDR disk * HHD424020F7SV00. Increase to 2secs when parallel probing * is in place. */ - ATA_TMOUT_FF_WAIT = 4 * HZ / 5, + ATA_TMOUT_FF_WAIT = 800, /* Spec mandates to wait for ">= 2ms" before checking status * after reset. We wait 150ms, because that was the magic @@ -256,14 +257,14 @@ enum { * * Old drivers/ide uses the 2mS rule and then waits for ready. */ - ATA_WAIT_AFTER_RESET_MSECS = 150, + ATA_WAIT_AFTER_RESET = 150, /* If PMP is supported, we have to do follow-up SRST. As some * PMPs don't send D2H Reg FIS after hardreset, LLDs are * advised to wait only for the following duration before * doing SRST. */ - ATA_TMOUT_PMP_SRST_WAIT = 1 * HZ, + ATA_TMOUT_PMP_SRST_WAIT = 1000, /* ATA bus states */ BUS_UNKNOWN = 0, @@ -895,8 +896,7 @@ extern void ata_host_resume(struct ata_host *host); #endif extern int ata_ratelimit(void); extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val, - unsigned long interval_msec, - unsigned long timeout_msec); + unsigned long interval, unsigned long timeout); extern int atapi_cmd_type(u8 opcode); extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis); @@ -1389,6 +1389,12 @@ static inline int ata_check_ready(u8 status) return 0; } +static inline unsigned long ata_deadline(unsigned long from_jiffies, + unsigned long timeout_msecs) +{ + return from_jiffies + msecs_to_jiffies(timeout_msecs); +} + /************************************************************************** * PMP - drivers/ata/libata-pmp.c -- cgit v1.2.3 From 0a2c0f56159999e20015241d3b8fa89b1ab14309 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 20 May 2008 02:17:52 +0900 Subject: libata: improve EH retry delay handling EH retries were delayed by 5 seconds to ensure that resets don't occur back-to-back. However, this 5 second delay is superflous or excessive in many cases. For example, after IDENTIFY times out, there's no reason to wait five more seconds before retrying. This patch adds ehc->last_reset timestamp and record the timestamp for the last reset trial or success and uses it to space resets by ATA_EH_RESET_COOL_DOWN which is 5 secs and removes unconditional 5 sec sleeps. As this change makes inter-try waits often shorter and they're redundant in nature, this patch also removes the "retrying..." messages. While at it, convert explicit rounding up division to DIV_ROUND_UP(). This change speeds up EH in many cases w/o sacrificing robustness. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 38 ++++++++++++++++++++------------------ drivers/ata/libata-pmp.c | 10 ---------- include/linux/libata.h | 2 ++ 3 files changed, 22 insertions(+), 28 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 08dd07f10008..5b5ae631ed03 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -67,6 +67,9 @@ enum { ATA_ECAT_DUBIOUS_UNK_DEV = 7, ATA_ECAT_NR = 8, + /* always put at least this amount of time between resets */ + ATA_EH_RESET_COOL_DOWN = 5000, + /* Waiting in ->prereset can never be reliable. It's * sometimes nice to wait there but it can't be depended upon; * otherwise, we wouldn't be resetting. Just give it enough @@ -485,6 +488,9 @@ void ata_scsi_error(struct Scsi_Host *host) if (ata_ncq_enabled(dev)) ehc->saved_ncq_enabled |= 1 << devno; } + + /* set last reset timestamp to some time in the past */ + ehc->last_reset = jiffies - 60 * HZ; } ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS; @@ -2088,11 +2094,17 @@ int ata_eh_reset(struct ata_link *link, int classify, /* * Prepare to reset */ + now = jiffies; + deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN); + if (time_before(now, deadline)) + schedule_timeout_uninterruptible(deadline - now); + spin_lock_irqsave(ap->lock, flags); ap->pflags |= ATA_PFLAG_RESETTING; spin_unlock_irqrestore(ap->lock, flags); ata_eh_about_to_do(link, NULL, ATA_EH_RESET); + ehc->last_reset = jiffies; ata_link_for_each_dev(dev, link) { /* If we issue an SRST then an ATA drive (not ATAPI) @@ -2158,6 +2170,7 @@ int ata_eh_reset(struct ata_link *link, int classify, /* * Perform reset */ + ehc->last_reset = jiffies; if (ata_is_host_link(link)) ata_eh_freeze_port(ap); @@ -2278,6 +2291,7 @@ int ata_eh_reset(struct ata_link *link, int classify, /* reset successful, schedule revalidation */ ata_eh_done(link, NULL, ATA_EH_RESET); + ehc->last_reset = jiffies; ehc->i.action |= ATA_EH_REVALIDATE; rc = 0; @@ -2304,9 +2318,9 @@ int ata_eh_reset(struct ata_link *link, int classify, if (time_before(now, deadline)) { unsigned long delta = deadline - now; - ata_link_printk(link, KERN_WARNING, "reset failed " - "(errno=%d), retrying in %u secs\n", - rc, (jiffies_to_msecs(delta) + 999) / 1000); + ata_link_printk(link, KERN_WARNING, + "reset failed (errno=%d), retrying in %u secs\n", + rc, DIV_ROUND_UP(jiffies_to_msecs(delta), 1000)); while (delta) delta = schedule_timeout_uninterruptible(delta); @@ -2623,7 +2637,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, { struct ata_link *link; struct ata_device *dev; - int nr_failed_devs, nr_disabled_devs; + int nr_failed_devs; int rc; unsigned long flags; @@ -2666,7 +2680,6 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, retry: rc = 0; nr_failed_devs = 0; - nr_disabled_devs = 0; /* if UNLOADING, finish immediately */ if (ap->pflags & ATA_PFLAG_UNLOADING) @@ -2733,8 +2746,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset, dev_fail: nr_failed_devs++; - if (ata_eh_handle_dev_fail(dev, rc)) - nr_disabled_devs++; + ata_eh_handle_dev_fail(dev, rc); if (ap->pflags & ATA_PFLAG_FROZEN) { /* PMP reset requires working host port. @@ -2746,18 +2758,8 @@ dev_fail: } } - if (nr_failed_devs) { - if (nr_failed_devs != nr_disabled_devs) { - ata_port_printk(ap, KERN_WARNING, "failed to recover " - "some devices, retrying in 5 secs\n"); - ssleep(5); - } else { - /* no device left to recover, repeat fast */ - msleep(500); - } - + if (nr_failed_devs) goto retry; - } out: if (rc && r_failed_link) diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 63691d77ac43..b65db309c181 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -727,19 +727,12 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap, } if (tries) { - int sleep = ehc->i.flags & ATA_EHI_DID_RESET; - /* consecutive revalidation failures? speed down */ if (reval_failed) sata_down_spd_limit(link); else reval_failed = 1; - ata_dev_printk(dev, KERN_WARNING, - "retrying reset%s\n", - sleep ? " in 5 secs" : ""); - if (sleep) - ssleep(5); ehc->i.action |= ATA_EH_RESET; goto retry; } else { @@ -991,10 +984,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap) goto retry; if (--pmp_tries) { - ata_port_printk(ap, KERN_WARNING, - "failed to recover PMP, retrying in 5 secs\n"); pmp_ehc->i.action |= ATA_EH_RESET; - ssleep(5); goto retry; } diff --git a/include/linux/libata.h b/include/linux/libata.h index 94110b652b30..9058c2a325a9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -602,6 +602,8 @@ struct ata_eh_context { unsigned int did_probe_mask; unsigned int saved_ncq_enabled; u8 saved_xfer_mode[ATA_MAX_DEVICES]; + /* timestamp for the last reset attempt or success */ + unsigned long last_reset; }; struct ata_acpi_drive -- cgit v1.2.3 From d8af0eb6046c56e7238171ca420622541db24926 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 20 May 2008 02:17:53 +0900 Subject: libata: use ULONG_MAX to terminate reset timeout table This doesn't introduce any functional changes. This is to make reset timeout table consistent with to-be-added command timeout tables. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 5b5ae631ed03..83d1451fa714 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -90,7 +90,7 @@ static const unsigned long ata_eh_reset_timeouts[] = { 10000, /* > 99% working drives spin up before 20sec */ 35000, /* give > 30 secs of idleness for retarded devices */ 5000, /* and sweet one last chance */ - /* > 1 min has elapsed, give up */ + ULONG_MAX, /* > 1 min has elapsed, give up */ }; static void __ata_port_freeze(struct ata_port *ap); @@ -2077,13 +2077,12 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_prereset_fn_t prereset, ata_reset_fn_t softreset, ata_reset_fn_t hardreset, ata_postreset_fn_t postreset) { - const int max_tries = ARRAY_SIZE(ata_eh_reset_timeouts); struct ata_port *ap = link->ap; struct ata_eh_context *ehc = &link->eh_context; unsigned int *classes = ehc->classes; unsigned int lflags = link->flags; int verbose = !(ehc->i.flags & ATA_EHI_QUIET); - int try = 0; + int max_tries = 0, try = 0; struct ata_device *dev; unsigned long deadline, now; ata_reset_fn_t reset; @@ -2094,6 +2093,9 @@ int ata_eh_reset(struct ata_link *link, int classify, /* * Prepare to reset */ + while (ata_eh_reset_timeouts[max_tries] != ULONG_MAX) + max_tries++; + now = jiffies; deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN); if (time_before(now, deadline)) -- cgit v1.2.3 From 87fbc5a060faf2394bee88a93519f9b9d434727c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 20 May 2008 02:17:54 +0900 Subject: libata: improve EH internal command timeout handling ATA_TMOUT_INTERNAL which was 30secs were used for all internal commands which is way too long when something goes wrong. This patch implements command type based stepped timeouts. Different command types can use different timeouts and each command type can use different timeout values after timeouts. ie. the initial timeout is set to a value which should cover most of the cases but not too long so that run away cases don't delay things too much. After the first try times out, the second try can use longer timeout and if that one times out too, it can go for full 30sec timeout. IDENTIFYs use 5s - 10s - 30s timeout and all other commands use 5s - 10s timeouts. This patch significantly cuts down the needed time to handle failure cases while still allowing libata to work with nut job devices through retries. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 16 ++++-- drivers/ata/libata-eh.c | 121 +++++++++++++++++++++++++++++++++++++++++++++- drivers/ata/libata.h | 2 + include/linux/libata.h | 8 ++- 4 files changed, 142 insertions(+), 5 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index c5c3b1b516e1..9bef1a84fe3f 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -144,7 +144,7 @@ static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CF module_param_named(dma, libata_dma_mask, int, 0444); MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)"); -static int ata_probe_timeout = ATA_TMOUT_INTERNAL / 1000; +static int ata_probe_timeout; module_param(ata_probe_timeout, int, 0444); MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); @@ -1611,6 +1611,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, struct ata_link *link = dev->link; struct ata_port *ap = link->ap; u8 command = tf->command; + int auto_timeout = 0; struct ata_queued_cmd *qc; unsigned int tag, preempted_tag; u32 preempted_sactive, preempted_qc_active; @@ -1683,8 +1684,14 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, spin_unlock_irqrestore(ap->lock, flags); - if (!timeout) - timeout = ata_probe_timeout * 1000; + if (!timeout) { + if (ata_probe_timeout) + timeout = ata_probe_timeout * 1000; + else { + timeout = ata_internal_cmd_timeout(dev, command); + auto_timeout = 1; + } + } rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout)); @@ -1760,6 +1767,9 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, spin_unlock_irqrestore(ap->lock, flags); + if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout) + ata_internal_cmd_timed_out(dev, command); + return err_mask; } diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 83d1451fa714..d5f03a6e3334 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -67,6 +67,8 @@ enum { ATA_ECAT_DUBIOUS_UNK_DEV = 7, ATA_ECAT_NR = 8, + ATA_EH_CMD_DFL_TIMEOUT = 5000, + /* always put at least this amount of time between resets */ ATA_EH_RESET_COOL_DOWN = 5000, @@ -93,6 +95,53 @@ static const unsigned long ata_eh_reset_timeouts[] = { ULONG_MAX, /* > 1 min has elapsed, give up */ }; +static const unsigned long ata_eh_identify_timeouts[] = { + 5000, /* covers > 99% of successes and not too boring on failures */ + 10000, /* combined time till here is enough even for media access */ + 30000, /* for true idiots */ + ULONG_MAX, +}; + +static const unsigned long ata_eh_other_timeouts[] = { + 5000, /* same rationale as identify timeout */ + 10000, /* ditto */ + /* but no merciful 30sec for other commands, it just isn't worth it */ + ULONG_MAX, +}; + +struct ata_eh_cmd_timeout_ent { + const u8 *commands; + const unsigned long *timeouts; +}; + +/* The following table determines timeouts to use for EH internal + * commands. Each table entry is a command class and matches the + * commands the entry applies to and the timeout table to use. + * + * On the retry after a command timed out, the next timeout value from + * the table is used. If the table doesn't contain further entries, + * the last value is used. + * + * ehc->cmd_timeout_idx keeps track of which timeout to use per + * command class, so if SET_FEATURES times out on the first try, the + * next try will use the second timeout value only for that class. + */ +#define CMDS(cmds...) (const u8 []){ cmds, 0 } +static const struct ata_eh_cmd_timeout_ent +ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = { + { .commands = CMDS(ATA_CMD_ID_ATA, ATA_CMD_ID_ATAPI), + .timeouts = ata_eh_identify_timeouts, }, + { .commands = CMDS(ATA_CMD_READ_NATIVE_MAX, ATA_CMD_READ_NATIVE_MAX_EXT), + .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_SET_MAX, ATA_CMD_SET_MAX_EXT), + .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_SET_FEATURES), + .timeouts = ata_eh_other_timeouts, }, + { .commands = CMDS(ATA_CMD_INIT_DEV_PARAMS), + .timeouts = ata_eh_other_timeouts, }, +}; +#undef CMDS + static void __ata_port_freeze(struct ata_port *ap); #ifdef CONFIG_PM static void ata_eh_handle_port_suspend(struct ata_port *ap); @@ -238,6 +287,73 @@ void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, #endif /* CONFIG_PCI */ +static int ata_lookup_timeout_table(u8 cmd) +{ + int i; + + for (i = 0; i < ATA_EH_CMD_TIMEOUT_TABLE_SIZE; i++) { + const u8 *cur; + + for (cur = ata_eh_cmd_timeout_table[i].commands; *cur; cur++) + if (*cur == cmd) + return i; + } + + return -1; +} + +/** + * ata_internal_cmd_timeout - determine timeout for an internal command + * @dev: target device + * @cmd: internal command to be issued + * + * Determine timeout for internal command @cmd for @dev. + * + * LOCKING: + * EH context. + * + * RETURNS: + * Determined timeout. + */ +unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + int ent = ata_lookup_timeout_table(cmd); + int idx; + + if (ent < 0) + return ATA_EH_CMD_DFL_TIMEOUT; + + idx = ehc->cmd_timeout_idx[dev->devno][ent]; + return ata_eh_cmd_timeout_table[ent].timeouts[idx]; +} + +/** + * ata_internal_cmd_timed_out - notification for internal command timeout + * @dev: target device + * @cmd: internal command which timed out + * + * Notify EH that internal command @cmd for @dev timed out. This + * function should be called only for commands whose timeouts are + * determined using ata_internal_cmd_timeout(). + * + * LOCKING: + * EH context. + */ +void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd) +{ + struct ata_eh_context *ehc = &dev->link->eh_context; + int ent = ata_lookup_timeout_table(cmd); + int idx; + + if (ent < 0) + return; + + idx = ehc->cmd_timeout_idx[dev->devno][ent]; + if (ata_eh_cmd_timeout_table[ent].timeouts[idx + 1] != ULONG_MAX) + ehc->cmd_timeout_idx[dev->devno][ent]++; +} + static void ata_ering_record(struct ata_ering *ering, unsigned int eflags, unsigned int err_mask) { @@ -2600,8 +2716,11 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) ata_eh_detach_dev(dev); /* schedule probe if necessary */ - if (ata_eh_schedule_probe(dev)) + if (ata_eh_schedule_probe(dev)) { ehc->tries[dev->devno] = ATA_EH_DEV_TRIES; + memset(ehc->cmd_timeout_idx[dev->devno], 0, + sizeof(ehc->cmd_timeout_idx[dev->devno])); + } return 1; } else { diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 1cf803adbc95..f6f9c28ec7f8 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -151,6 +151,8 @@ extern void ata_scsi_dev_rescan(struct work_struct *work); extern int ata_bus_probe(struct ata_port *ap); /* libata-eh.c */ +extern unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd); +extern void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd); extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd); extern void ata_scsi_error(struct Scsi_Host *host); extern void ata_port_wait_eh(struct ata_port *ap); diff --git a/include/linux/libata.h b/include/linux/libata.h index 9058c2a325a9..035f8e1cd0ac 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -237,7 +237,6 @@ enum { /* various lengths of time */ ATA_TMOUT_BOOT = 30000, /* heuristic */ ATA_TMOUT_BOOT_QUICK = 7000, /* heuristic */ - ATA_TMOUT_INTERNAL = 30000, ATA_TMOUT_INTERNAL_QUICK = 5000, /* FIXME: GoVault needs 2s but we can't afford that without @@ -341,6 +340,11 @@ enum { SATA_PMP_RW_TIMEOUT = 3000, /* PMP read/write timeout */ + /* This should match the actual table size of + * ata_eh_cmd_timeout_table in libata-eh.c. + */ + ATA_EH_CMD_TIMEOUT_TABLE_SIZE = 5, + /* Horkage types. May be set by libata or controller on drives (some horkage may be drive/controller pair dependant */ @@ -598,6 +602,8 @@ struct ata_eh_info { struct ata_eh_context { struct ata_eh_info i; int tries[ATA_MAX_DEVICES]; + int cmd_timeout_idx[ATA_MAX_DEVICES] + [ATA_EH_CMD_TIMEOUT_TABLE_SIZE]; unsigned int classes[ATA_MAX_DEVICES]; unsigned int did_probe_mask; unsigned int saved_ncq_enabled; -- cgit v1.2.3 From 18f7ba4c2f4be6b37d925931f04d6cc28d88d1ee Mon Sep 17 00:00:00 2001 From: Kristen Carlson Accardi Date: Tue, 3 Jun 2008 10:33:55 -0700 Subject: libata/ahci: enclosure management support Add Enclosure Management support to libata and ahci. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 321 +++++++++++++++++++++++++++++++++++++++++++++- drivers/ata/libata-scsi.c | 79 ++++++++++++ include/linux/libata.h | 21 +++ 3 files changed, 419 insertions(+), 2 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 5e6468a7ca4b..65d4e968feb4 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -56,6 +56,12 @@ MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip) static int ahci_enable_alpm(struct ata_port *ap, enum link_pm policy); static void ahci_disable_alpm(struct ata_port *ap); +static ssize_t ahci_led_show(struct ata_port *ap, char *buf); +static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, + size_t size); +static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, + ssize_t size); +#define MAX_SLOTS 8 enum { AHCI_PCI_BAR = 5, @@ -98,6 +104,8 @@ enum { HOST_IRQ_STAT = 0x08, /* interrupt status */ HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */ HOST_VERSION = 0x10, /* AHCI spec. version compliancy */ + HOST_EM_LOC = 0x1c, /* Enclosure Management location */ + HOST_EM_CTL = 0x20, /* Enclosure Management Control */ /* HOST_CTL bits */ HOST_RESET = (1 << 0), /* reset controller; self-clear */ @@ -105,6 +113,7 @@ enum { HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ /* HOST_CAP bits */ + HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */ HOST_CAP_SSC = (1 << 14), /* Slumber capable */ HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */ HOST_CAP_CLO = (1 << 24), /* Command List Override support */ @@ -202,6 +211,11 @@ enum { ATA_FLAG_IPM, ICH_MAP = 0x90, /* ICH MAP register */ + + /* em_ctl bits */ + EM_CTL_RST = (1 << 9), /* Reset */ + EM_CTL_TM = (1 << 8), /* Transmit Message */ + EM_CTL_ALHD = (1 << 26), /* Activity LED */ }; struct ahci_cmd_hdr { @@ -219,12 +233,21 @@ struct ahci_sg { __le32 flags_size; }; +struct ahci_em_priv { + enum sw_activity blink_policy; + struct timer_list timer; + unsigned long saved_activity; + unsigned long activity; + unsigned long led_state; +}; + struct ahci_host_priv { unsigned int flags; /* AHCI_HFLAG_* */ u32 cap; /* cap to use */ u32 port_map; /* port map to use */ u32 saved_cap; /* saved initial cap */ u32 saved_port_map; /* saved initial port_map */ + u32 em_loc; /* enclosure management location */ }; struct ahci_port_priv { @@ -240,6 +263,8 @@ struct ahci_port_priv { unsigned int ncq_saw_dmas:1; unsigned int ncq_saw_sdb:1; u32 intr_mask; /* interrupts to enable */ + struct ahci_em_priv em_priv[MAX_SLOTS];/* enclosure management info + * per PM slot */ }; static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val); @@ -277,9 +302,20 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); static int ahci_pci_device_resume(struct pci_dev *pdev); #endif +static ssize_t ahci_activity_show(struct ata_device *dev, char *buf); +static ssize_t ahci_activity_store(struct ata_device *dev, + enum sw_activity val); +static void ahci_init_sw_activity(struct ata_link *link); static struct device_attribute *ahci_shost_attrs[] = { &dev_attr_link_power_management_policy, + &dev_attr_em_message_type, + &dev_attr_em_message, + NULL +}; + +static struct device_attribute *ahci_sdev_attrs[] = { + &dev_attr_sw_activity, NULL }; @@ -289,6 +325,7 @@ static struct scsi_host_template ahci_sht = { .sg_tablesize = AHCI_MAX_SG, .dma_boundary = AHCI_DMA_BOUNDARY, .shost_attrs = ahci_shost_attrs, + .sdev_attrs = ahci_sdev_attrs, }; static struct ata_port_operations ahci_ops = { @@ -316,6 +353,10 @@ static struct ata_port_operations ahci_ops = { .enable_pm = ahci_enable_alpm, .disable_pm = ahci_disable_alpm, + .em_show = ahci_led_show, + .em_store = ahci_led_store, + .sw_activity_show = ahci_activity_show, + .sw_activity_store = ahci_activity_store, #ifdef CONFIG_PM .port_suspend = ahci_port_suspend, .port_resume = ahci_port_resume, @@ -561,6 +602,11 @@ static struct pci_driver ahci_pci_driver = { #endif }; +static int ahci_em_messages = 1; +module_param(ahci_em_messages, int, 0444); +/* add other LED protocol types when they become supported */ +MODULE_PARM_DESC(ahci_em_messages, + "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED"); static inline int ahci_nr_ports(u32 cap) { @@ -1031,11 +1077,28 @@ static void ahci_power_down(struct ata_port *ap) static void ahci_start_port(struct ata_port *ap) { + struct ahci_port_priv *pp = ap->private_data; + struct ata_link *link; + struct ahci_em_priv *emp; + /* enable FIS reception */ ahci_start_fis_rx(ap); /* enable DMA */ ahci_start_engine(ap); + + /* turn on LEDs */ + if (ap->flags & ATA_FLAG_EM) { + ata_port_for_each_link(link, ap) { + emp = &pp->em_priv[link->pmp]; + ahci_transmit_led_message(ap, emp->led_state, 4); + } + } + + if (ap->flags & ATA_FLAG_SW_ACTIVITY) + ata_port_for_each_link(link, ap) + ahci_init_sw_activity(link); + } static int ahci_deinit_port(struct ata_port *ap, const char **emsg) @@ -1116,6 +1179,230 @@ static int ahci_reset_controller(struct ata_host *host) return 0; } +static void ahci_sw_activity(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + + if (!(link->flags & ATA_LFLAG_SW_ACTIVITY)) + return; + + emp->activity++; + if (!timer_pending(&emp->timer)) + mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10)); +} + +static void ahci_sw_activity_blink(unsigned long arg) +{ + struct ata_link *link = (struct ata_link *)arg; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + unsigned long led_message = emp->led_state; + u32 activity_led_state; + + led_message &= 0xffff0000; + led_message |= ap->port_no | (link->pmp << 8); + + /* check to see if we've had activity. If so, + * toggle state of LED and reset timer. If not, + * turn LED to desired idle state. + */ + if (emp->saved_activity != emp->activity) { + emp->saved_activity = emp->activity; + /* get the current LED state */ + activity_led_state = led_message & 0x00010000; + + if (activity_led_state) + activity_led_state = 0; + else + activity_led_state = 1; + + /* clear old state */ + led_message &= 0xfff8ffff; + + /* toggle state */ + led_message |= (activity_led_state << 16); + mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100)); + } else { + /* switch to idle */ + led_message &= 0xfff8ffff; + if (emp->blink_policy == BLINK_OFF) + led_message |= (1 << 16); + } + ahci_transmit_led_message(ap, led_message, 4); +} + +static void ahci_init_sw_activity(struct ata_link *link) +{ + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + + /* init activity stats, setup timer */ + emp->saved_activity = emp->activity = 0; + setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link); + + /* check our blink policy and set flag for link if it's enabled */ + if (emp->blink_policy) + link->flags |= ATA_LFLAG_SW_ACTIVITY; +} + +static int ahci_reset_em(struct ata_host *host) +{ + void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; + u32 em_ctl; + + em_ctl = readl(mmio + HOST_EM_CTL); + if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST)) + return -EINVAL; + + writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL); + return 0; +} + +static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, + ssize_t size) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR]; + u32 em_ctl; + u32 message[] = {0, 0}; + unsigned int flags; + int pmp; + struct ahci_em_priv *emp; + + /* get the slot number from the message */ + pmp = (state & 0x0000ff00) >> 8; + if (pmp < MAX_SLOTS) + emp = &pp->em_priv[pmp]; + else + return -EINVAL; + + spin_lock_irqsave(ap->lock, flags); + + /* + * if we are still busy transmitting a previous message, + * do not allow + */ + em_ctl = readl(mmio + HOST_EM_CTL); + if (em_ctl & EM_CTL_TM) { + spin_unlock_irqrestore(ap->lock, flags); + return -EINVAL; + } + + /* + * create message header - this is all zero except for + * the message size, which is 4 bytes. + */ + message[0] |= (4 << 8); + + /* ignore 0:4 of byte zero, fill in port info yourself */ + message[1] = ((state & 0xfffffff0) | ap->port_no); + + /* write message to EM_LOC */ + writel(message[0], mmio + hpriv->em_loc); + writel(message[1], mmio + hpriv->em_loc+4); + + /* save off new led state for port/slot */ + emp->led_state = message[1]; + + /* + * tell hardware to transmit the message + */ + writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL); + + spin_unlock_irqrestore(ap->lock, flags); + return size; +} + +static ssize_t ahci_led_show(struct ata_port *ap, char *buf) +{ + struct ahci_port_priv *pp = ap->private_data; + struct ata_link *link; + struct ahci_em_priv *emp; + int rc = 0; + + ata_port_for_each_link(link, ap) { + emp = &pp->em_priv[link->pmp]; + rc += sprintf(buf, "%lx\n", emp->led_state); + } + return rc; +} + +static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, + size_t size) +{ + int state; + int pmp; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp; + + state = simple_strtoul(buf, NULL, 0); + + /* get the slot number from the message */ + pmp = (state & 0x0000ff00) >> 8; + if (pmp < MAX_SLOTS) + emp = &pp->em_priv[pmp]; + else + return -EINVAL; + + /* mask off the activity bits if we are in sw_activity + * mode, user should turn off sw_activity before setting + * activity led through em_message + */ + if (emp->blink_policy) + state &= 0xfff8ffff; + + return ahci_transmit_led_message(ap, state, size); +} + +static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + u32 port_led_state = emp->led_state; + + /* save the desired Activity LED behavior */ + if (val == OFF) { + /* clear LFLAG */ + link->flags &= ~(ATA_LFLAG_SW_ACTIVITY); + + /* set the LED to OFF */ + port_led_state &= 0xfff80000; + port_led_state |= (ap->port_no | (link->pmp << 8)); + ahci_transmit_led_message(ap, port_led_state, 4); + } else { + link->flags |= ATA_LFLAG_SW_ACTIVITY; + if (val == BLINK_OFF) { + /* set LED to ON for idle */ + port_led_state &= 0xfff80000; + port_led_state |= (ap->port_no | (link->pmp << 8)); + port_led_state |= 0x00010000; /* check this */ + ahci_transmit_led_message(ap, port_led_state, 4); + } + } + emp->blink_policy = val; + return 0; +} + +static ssize_t ahci_activity_show(struct ata_device *dev, char *buf) +{ + struct ata_link *link = dev->link; + struct ata_port *ap = link->ap; + struct ahci_port_priv *pp = ap->private_data; + struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; + + /* display the saved value of activity behavior for this + * disk. + */ + return sprintf(buf, "%d\n", emp->blink_policy); +} + static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap, int port_no, void __iomem *mmio, void __iomem *port_mmio) @@ -1848,6 +2135,8 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); readl(port_mmio + PORT_CMD_ISSUE); /* flush */ + ahci_sw_activity(qc->dev->link); + return 0; } @@ -2154,7 +2443,8 @@ static void ahci_print_info(struct ata_host *host) dev_printk(KERN_INFO, &pdev->dev, "flags: " "%s%s%s%s%s%s%s" - "%s%s%s%s%s%s%s\n" + "%s%s%s%s%s%s%s" + "%s\n" , cap & (1 << 31) ? "64bit " : "", @@ -2171,7 +2461,8 @@ static void ahci_print_info(struct ata_host *host) cap & (1 << 17) ? "pmp " : "", cap & (1 << 15) ? "pio " : "", cap & (1 << 14) ? "slum " : "", - cap & (1 << 13) ? "part " : "" + cap & (1 << 13) ? "part " : "", + cap & (1 << 6) ? "ems ": "" ); } @@ -2291,6 +2582,24 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (hpriv->cap & HOST_CAP_PMP) pi.flags |= ATA_FLAG_PMP; + if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) { + u8 messages; + void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR]; + u32 em_loc = readl(mmio + HOST_EM_LOC); + u32 em_ctl = readl(mmio + HOST_EM_CTL); + + messages = (em_ctl & 0x000f0000) >> 16; + + /* we only support LED message type right now */ + if ((messages & 0x01) && (ahci_em_messages == 1)) { + /* store em_loc */ + hpriv->em_loc = ((em_loc >> 16) * 4); + pi.flags |= ATA_FLAG_EM; + if (!(em_ctl & EM_CTL_ALHD)) + pi.flags |= ATA_FLAG_SW_ACTIVITY; + } + } + /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at @@ -2304,6 +2613,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) host->iomap = pcim_iomap_table(pdev); host->private_data = hpriv; + if (pi.flags & ATA_FLAG_EM) + ahci_reset_em(host); + for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; @@ -2314,6 +2626,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* set initial link pm policy */ ap->pm_policy = NOT_AVAILABLE; + /* set enclosure management message type */ + if (ap->flags & ATA_FLAG_EM) + ap->em_message_type = ahci_em_messages; + + /* disabled/not-implemented port */ if (!(hpriv->port_map & (1 << i))) ap->ops = &ata_dummy_port_ops; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 57a43649a461..b578b11caa7b 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -190,6 +190,85 @@ static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq); } +static ssize_t +ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + if (ap->ops->em_store && (ap->flags & ATA_FLAG_EM)) + return ap->ops->em_store(ap, buf, count); + return -EINVAL; +} + +static ssize_t +ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + + if (ap->ops->em_show && (ap->flags & ATA_FLAG_EM)) + return ap->ops->em_show(ap, buf); + return -EINVAL; +} +DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO, + ata_scsi_em_message_show, ata_scsi_em_message_store); +EXPORT_SYMBOL_GPL(dev_attr_em_message); + +static ssize_t +ata_scsi_em_message_type_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct ata_port *ap = ata_shost_to_port(shost); + + return snprintf(buf, 23, "%d\n", ap->em_message_type); +} +DEVICE_ATTR(em_message_type, S_IRUGO, + ata_scsi_em_message_type_show, NULL); +EXPORT_SYMBOL_GPL(dev_attr_em_message_type); + +static ssize_t +ata_scsi_activity_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *atadev = ata_scsi_find_dev(ap, sdev); + + if (ap->ops->sw_activity_show && (ap->flags & ATA_FLAG_SW_ACTIVITY)) + return ap->ops->sw_activity_show(atadev, buf); + return -EINVAL; +} + +static ssize_t +ata_scsi_activity_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *atadev = ata_scsi_find_dev(ap, sdev); + enum sw_activity val; + int rc; + + if (ap->ops->sw_activity_store && (ap->flags & ATA_FLAG_SW_ACTIVITY)) { + val = simple_strtoul(buf, NULL, 0); + switch (val) { + case OFF: case BLINK_ON: case BLINK_OFF: + rc = ap->ops->sw_activity_store(atadev, val); + if (!rc) + return count; + else + return rc; + } + } + return -EINVAL; +} +DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show, + ata_scsi_activity_store); +EXPORT_SYMBOL_GPL(dev_attr_sw_activity); + static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { diff --git a/include/linux/libata.h b/include/linux/libata.h index 035f8e1cd0ac..5b247b8a6b3b 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -169,6 +169,7 @@ enum { ATA_LFLAG_ASSUME_CLASS = ATA_LFLAG_ASSUME_ATA | ATA_LFLAG_ASSUME_SEMB, ATA_LFLAG_NO_RETRY = (1 << 5), /* don't retry this link */ ATA_LFLAG_DISABLED = (1 << 6), /* link is disabled */ + ATA_LFLAG_SW_ACTIVITY = (1 << 7), /* keep activity stats */ /* struct ata_port flags */ ATA_FLAG_SLAVE_POSS = (1 << 0), /* host supports slave dev */ @@ -191,6 +192,10 @@ enum { ATA_FLAG_AN = (1 << 18), /* controller supports AN */ ATA_FLAG_PMP = (1 << 19), /* controller supports PMP */ ATA_FLAG_IPM = (1 << 20), /* driver can handle IPM */ + ATA_FLAG_EM = (1 << 21), /* driver supports enclosure + * management */ + ATA_FLAG_SW_ACTIVITY = (1 << 22), /* driver supports sw activity + * led */ /* The following flag belongs to ap->pflags but is kept in * ap->flags because it's referenced in many LLDs and will be @@ -446,6 +451,15 @@ enum link_pm { MEDIUM_POWER, }; extern struct device_attribute dev_attr_link_power_management_policy; +extern struct device_attribute dev_attr_em_message_type; +extern struct device_attribute dev_attr_em_message; +extern struct device_attribute dev_attr_sw_activity; + +enum sw_activity { + OFF, + BLINK_ON, + BLINK_OFF, +}; #ifdef CONFIG_ATA_SFF struct ata_ioports { @@ -701,6 +715,7 @@ struct ata_port { struct timer_list fastdrain_timer; unsigned long fastdrain_cnt; + int em_message_type; void *private_data; #ifdef CONFIG_ATA_ACPI @@ -792,6 +807,12 @@ struct ata_port_operations { u8 (*bmdma_status)(struct ata_port *ap); #endif /* CONFIG_ATA_SFF */ + ssize_t (*em_show)(struct ata_port *ap, char *buf); + ssize_t (*em_store)(struct ata_port *ap, const char *message, + size_t size); + ssize_t (*sw_activity_show)(struct ata_device *dev, char *buf); + ssize_t (*sw_activity_store)(struct ata_device *dev, + enum sw_activity val); /* * Obsolete */ -- cgit v1.2.3 From ec6add99307d5149e17f6e358f19f0205b622407 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Mon, 23 Jun 2008 11:01:31 +0200 Subject: [libata] sata_svw: update code comments relating to data corruption Signed-off-by: Pavel Machek Signed-off-by: Jeff Garzik --- drivers/ata/sata_svw.c | 38 +++++++++++++++++++++++--------------- 1 file changed, 23 insertions(+), 15 deletions(-) diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 16aa6839aa5a..fb13b82aacba 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -253,21 +253,29 @@ static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc) /* start host DMA transaction */ dmactl = readb(mmio + ATA_DMA_CMD); writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); - /* There is a race condition in certain SATA controllers that can - be seen when the r/w command is given to the controller before the - host DMA is started. On a Read command, the controller would initiate - the command to the drive even before it sees the DMA start. When there - are very fast drives connected to the controller, or when the data request - hits in the drive cache, there is the possibility that the drive returns a part - or all of the requested data to the controller before the DMA start is issued. - In this case, the controller would become confused as to what to do with the data. - In the worst case when all the data is returned back to the controller, the - controller could hang. In other cases it could return partial data returning - in data corruption. This problem has been seen in PPC systems and can also appear - on an system with very fast disks, where the SATA controller is sitting behind a - number of bridges, and hence there is significant latency between the r/w command - and the start command. */ - /* issue r/w command if the access is to ATA*/ + /* This works around possible data corruption. + + On certain SATA controllers that can be seen when the r/w + command is given to the controller before the host DMA is + started. + + On a Read command, the controller would initiate the + command to the drive even before it sees the DMA + start. When there are very fast drives connected to the + controller, or when the data request hits in the drive + cache, there is the possibility that the drive returns a + part or all of the requested data to the controller before + the DMA start is issued. In this case, the controller + would become confused as to what to do with the data. In + the worst case when all the data is returned back to the + controller, the controller could hang. In other cases it + could return partial data returning in data + corruption. This problem has been seen in PPC systems and + can also appear on an system with very fast disks, where + the SATA controller is sitting behind a number of bridges, + and hence there is significant latency between the r/w + command and the start command. */ + /* issue r/w command if the access is to ATA */ if (qc->tf.protocol == ATA_PROT_DMA) ap->ops->sff_exec_command(ap, &qc->tf); } -- cgit v1.2.3 From 3eabddb8ed4f488664ff5d67968392bb424836a3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 10 Jun 2008 18:28:05 +0900 Subject: libata-eh: update atapi_eh_request_sense() to take @dev instead of @qc Update atapi_eh_request_sense() to take @dev, @sense_buf and @dfl_sense_key instead of taking @qc and extracting information from it. This change is to make the function more generic and allow it to be called from other places. While at it, make cdb initialization use initializer. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index d5f03a6e3334..58bdc538d229 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1360,6 +1360,7 @@ static int ata_eh_read_log_10h(struct ata_device *dev, * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE * @dev: device to perform REQUEST_SENSE to * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long) + * @dfl_sense_key: default sense key to use * * Perform ATAPI REQUEST_SENSE after the device reported CHECK * SENSE. This function is EH helper. @@ -1370,13 +1371,13 @@ static int ata_eh_read_log_10h(struct ata_device *dev, * RETURNS: * 0 on success, AC_ERR_* mask on failure */ -static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc) +static unsigned int atapi_eh_request_sense(struct ata_device *dev, + u8 *sense_buf, u8 dfl_sense_key) { - struct ata_device *dev = qc->dev; - unsigned char *sense_buf = qc->scsicmd->sense_buffer; + u8 cdb[ATAPI_CDB_LEN] = + { REQUEST_SENSE, 0, 0, 0, SCSI_SENSE_BUFFERSIZE, 0 }; struct ata_port *ap = dev->link->ap; struct ata_taskfile tf; - u8 cdb[ATAPI_CDB_LEN]; DPRINTK("ATAPI request sense\n"); @@ -1387,15 +1388,11 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc) * for the case where they are -not- overwritten */ sense_buf[0] = 0x70; - sense_buf[2] = qc->result_tf.feature >> 4; + sense_buf[2] = dfl_sense_key; /* some devices time out if garbage left in tf */ ata_tf_init(dev, &tf); - memset(cdb, 0, ATAPI_CDB_LEN); - cdb[0] = REQUEST_SENSE; - cdb[4] = SCSI_SENSE_BUFFERSIZE; - tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf.command = ATA_CMD_PACKET; @@ -1567,7 +1564,9 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc, case ATA_DEV_ATAPI: if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) { - tmp = atapi_eh_request_sense(qc); + tmp = atapi_eh_request_sense(qc->dev, + qc->scsicmd->sense_buffer, + qc->result_tf.feature >> 4); if (!tmp) { /* ATA_QCFLAG_SENSE_VALID is used to * tell atapi_qc_complete() that sense -- cgit v1.2.3 From 6ad67403da47e833d9e418caf7f28295c9472e11 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 18 Jun 2008 17:16:43 -0700 Subject: ata: endianness annotations in pata drivers drivers/ata/pata_qdi.c:142:9: warning: incorrect type in assignment (different base types) drivers/ata/pata_qdi.c:142:9: expected unsigned int [unsigned] [usertype] pad drivers/ata/pata_qdi.c:142:9: got restricted __le32 [usertype] drivers/ata/pata_qdi.c:146:15: warning: cast to restricted __le32 drivers/ata/pata_winbond.c:110:9: warning: incorrect type in assignment (different base types) drivers/ata/pata_winbond.c:110:9: expected unsigned int [unsigned] [usertype] pad drivers/ata/pata_winbond.c:110:9: got restricted __le32 [usertype] drivers/ata/pata_winbond.c:114:15: warning: cast to restricted __le32 drivers/ata/pata_legacy.c:310:9: warning: incorrect type in assignment (different base types) drivers/ata/pata_legacy.c:310:9: expected unsigned int [unsigned] [usertype] pad drivers/ata/pata_legacy.c:310:9: got restricted __le32 [usertype] drivers/ata/pata_legacy.c:314:15: warning: cast to restricted __le32 drivers/ata/pata_legacy.c:752:11: warning: cast to restricted __le32 drivers/ata/pata_legacy.c:756:9: warning: incorrect type in assignment (different base types) drivers/ata/pata_legacy.c:756:9: expected unsigned int [unsigned] [addressable] [assigned] [usertype] pad drivers/ata/pata_legacy.c:756:9: got restricted __le32 [usertype] Signed-off-by: Harvey Harrison Signed-off-by: Jeff Garzik --- drivers/ata/pata_legacy.c | 10 ++++------ drivers/ata/pata_qdi.c | 2 +- drivers/ata/pata_winbond.c | 2 +- 3 files changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index fe7cc8ed4ea4..bc037ffce200 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -305,7 +305,7 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - u32 pad; + __le32 pad; if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); @@ -746,14 +746,12 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - u32 pad; + __le32 pad; if (rw == WRITE) { memcpy(&pad, buf + buflen - slop, slop); - pad = le32_to_cpu(pad); - iowrite32(pad, ap->ioaddr.data_addr); + iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); } else { - pad = ioread32(ap->ioaddr.data_addr); - pad = cpu_to_le32(pad); + pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); } } diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 97e5b090d7c2..63b7a1c165a5 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -137,7 +137,7 @@ static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf, iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - u32 pad; + __le32 pad; if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index 474528f8fe3d..a7606b044a61 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -105,7 +105,7 @@ static unsigned int winbond_data_xfer(struct ata_device *dev, iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { - u32 pad; + __le32 pad; if (rw == READ) { pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); memcpy(buf + buflen - slop, &pad, slop); -- cgit v1.2.3 From 1e9dbc9291738149577cc488fd441f061815e02e Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 19 Jun 2008 13:13:38 -0600 Subject: [libata] Add support for VPD page b1 SCSI VPD page b1 reports the nominal rotation speed and physical size of the device. Devices that conform to ATA-8 can return this information in words 217 and 168 of the identify data. Signed-off-by: Matthew Wilcox Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index b578b11caa7b..479c29e2e25c 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1857,7 +1857,9 @@ static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf) const u8 pages[] = { 0x00, /* page 0x00, this page */ 0x80, /* page 0x80, unit serial no page */ - 0x83 /* page 0x83, device ident page */ + 0x83, /* page 0x83, device ident page */ + 0x89, /* page 0x89, ata info page */ + 0xb1, /* page 0xb1, block device characteristics page */ }; rbuf[3] = sizeof(pages); /* number of supported VPD pages */ @@ -1978,6 +1980,19 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf) return 0; } +static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf) +{ + rbuf[1] = 0xb1; + rbuf[3] = 0x3c; + if (ata_id_major_version(args->id) > 7) { + rbuf[4] = args->id[217] >> 8; + rbuf[5] = args->id[217]; + rbuf[7] = args->id[168] & 0xf; + } + + return 0; +} + /** * ata_scsiop_noop - Command handler that simply returns success. * @args: device IDENTIFY data / SCSI command of interest. @@ -2999,6 +3014,9 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, case 0x89: ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89); break; + case 0xb1: + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1); + break; default: ata_scsi_invalid_field(cmd, done); break; -- cgit v1.2.3 From 24920c8a6358bf5532f1336b990b1c0fe2b599ee Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 4 Jul 2008 13:32:17 +0800 Subject: AHCI: speed up resume During resume, sleep 1 second to wait for the HBA reset to finish is a waste of time. According to the AHCI 1.2 spec, We should poll the HOST_CTL register, and return error if the host reset is not finished within 1 second. Test results show that the HBA reset can be done quickly(in usecs). And this patch may save nearly 1 second during resume. Signed-off-by: Zhang Rui Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 65d4e968feb4..4ff3f03cf97b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1142,12 +1142,15 @@ static int ahci_reset_controller(struct ata_host *host) readl(mmio + HOST_CTL); /* flush */ } - /* reset must complete within 1 second, or + /* + * to perform host reset, OS should set HOST_RESET + * and poll until this bit is read to be "0". + * reset must complete within 1 second, or * the hardware should be considered fried. */ - ssleep(1); + tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET, + HOST_RESET, 10, 1000); - tmp = readl(mmio + HOST_CTL); if (tmp & HOST_RESET) { dev_printk(KERN_ERR, host->dev, "controller reset failed (0x%x)\n", tmp); -- cgit v1.2.3 From 2640d7c0b8d5d9d9ee303b8cd09f5124176f6239 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Sun, 6 Jul 2008 09:23:20 -0400 Subject: AHCI: Remove an unnecessary flush from ahci_qc_issue In an I/O heavy workload (IOZone), ahci_qc_issue is the second-highest consumer of CPU cycles. Removing the flush gets us approximately 10% bandwidth improvement. I believe this to be because the CPU can start queueing the next request instead of waiting for the readl() to flush the writes to the device. The flush isn't necessary because we're using a 'queue' metaphor; we don't guarantee the command has got to the device, nor do we need to guarantee the command has got to the controller. Signed-off-by: Matthew Wilcox Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 4ff3f03cf97b..dc7596f028b6 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2136,7 +2136,6 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) if (qc->tf.protocol == ATA_PROT_NCQ) writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); - readl(port_mmio + PORT_CMD_ISSUE); /* flush */ ahci_sw_activity(qc->dev->link); -- cgit v1.2.3 From 7f101a97866e2687a455ecffeb96bcf317c8482a Mon Sep 17 00:00:00 2001 From: Dave Young Date: Mon, 14 Jul 2008 22:38:19 +0200 Subject: i2c: Use class_for_each_device Use class_for_each_device for iteration. Signed-off-by: Dave Young Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 92 ++++++++++++++++++++++++++------------------------ 1 file changed, 48 insertions(+), 44 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index d0175f4f8fc6..f489683fd15f 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -35,7 +35,6 @@ #include #include #include -#include #include #include "i2c-core.h" @@ -646,6 +645,16 @@ EXPORT_SYMBOL(i2c_del_adapter); /* ------------------------------------------------------------------------- */ +static int __attach_adapter(struct device *dev, void *data) +{ + struct i2c_adapter *adapter = to_i2c_adapter(dev); + struct i2c_driver *driver = data; + + driver->attach_adapter(adapter); + + return 0; +} + /* * An i2c_driver is used with one or more i2c_client (device) nodes to access * i2c slave chips, on a bus instance associated with some i2c_adapter. There @@ -686,21 +695,49 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name); /* legacy drivers scan i2c busses directly */ - if (driver->attach_adapter) { - struct i2c_adapter *adapter; + if (driver->attach_adapter) + class_for_each_device(&i2c_adapter_class, driver, + __attach_adapter); - down(&i2c_adapter_class.sem); - list_for_each_entry(adapter, &i2c_adapter_class.devices, - dev.node) { - driver->attach_adapter(adapter); + mutex_unlock(&core_lock); + return 0; +} +EXPORT_SYMBOL(i2c_register_driver); + +static int __detach_adapter(struct device *dev, void *data) +{ + struct i2c_adapter *adapter = to_i2c_adapter(dev); + struct i2c_driver *driver = data; + + /* Have a look at each adapter, if clients of this driver are still + * attached. If so, detach them to be able to kill the driver + * afterwards. + */ + if (driver->detach_adapter) { + if (driver->detach_adapter(adapter)) + dev_err(&adapter->dev, + "detach_adapter failed for driver [%s]\n", + driver->driver.name); + } else { + struct list_head *item, *_n; + struct i2c_client *client; + + list_for_each_safe(item, _n, &adapter->clients) { + client = list_entry(item, struct i2c_client, list); + if (client->driver != driver) + continue; + dev_dbg(&adapter->dev, + "detaching client [%s] at 0x%02x\n", + client->name, client->addr); + if (driver->detach_client(client)) + dev_err(&adapter->dev, "detach_client " + "failed for client [%s] at 0x%02x\n", + client->name, client->addr); } - up(&i2c_adapter_class.sem); } - mutex_unlock(&core_lock); return 0; } -EXPORT_SYMBOL(i2c_register_driver); /** * i2c_del_driver - unregister I2C driver @@ -709,46 +746,13 @@ EXPORT_SYMBOL(i2c_register_driver); */ void i2c_del_driver(struct i2c_driver *driver) { - struct list_head *item2, *_n; - struct i2c_client *client; - struct i2c_adapter *adap; - mutex_lock(&core_lock); /* new-style driver? */ if (is_newstyle_driver(driver)) goto unregister; - /* Have a look at each adapter, if clients of this driver are still - * attached. If so, detach them to be able to kill the driver - * afterwards. - */ - down(&i2c_adapter_class.sem); - list_for_each_entry(adap, &i2c_adapter_class.devices, dev.node) { - if (driver->detach_adapter) { - if (driver->detach_adapter(adap)) { - dev_err(&adap->dev, "detach_adapter failed " - "for driver [%s]\n", - driver->driver.name); - } - } else { - list_for_each_safe(item2, _n, &adap->clients) { - client = list_entry(item2, struct i2c_client, list); - if (client->driver != driver) - continue; - dev_dbg(&adap->dev, "detaching client [%s] " - "at 0x%02x\n", client->name, - client->addr); - if (driver->detach_client(client)) { - dev_err(&adap->dev, "detach_client " - "failed for client [%s] at " - "0x%02x\n", client->name, - client->addr); - } - } - } - } - up(&i2c_adapter_class.sem); + class_for_each_device(&i2c_adapter_class, driver, __detach_adapter); unregister: driver_unregister(&driver->driver); -- cgit v1.2.3 From cc99ff70c7ad36e01db545a81a8594474964f918 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Mon, 14 Jul 2008 22:38:20 +0200 Subject: i2c-davinci: Ensure clock between 7-12 MHz Ensure psc value gives a clock between 7-12 MHz Signed-off-by: Troy Kisky Signed-off-by: Kevin Hilman Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-davinci.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 7ecbfc429b19..7fdbca17d4a8 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -142,6 +142,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev) struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; u16 psc; u32 clk; + u32 d; u32 clkh; u32 clkl; u32 input_clock = clk_get_rate(dev->clk); @@ -171,23 +172,29 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev) * if PSC > 1 , d = 5 */ - psc = 26; /* To get 1MHz clock */ + /* get minimum of 7 MHz clock, but max of 12 MHz */ + psc = (input_clock / 7000000) - 1; + if ((input_clock / (psc + 1)) > 12000000) + psc++; /* better to run under spec than over */ + d = (psc >= 2) ? 5 : 7 - psc; - clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000)) - 10; - clkh = (50 * clk) / 100; + clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000)) - (d << 1); + clkh = clk >> 1; clkl = clk - clkh; davinci_i2c_write_reg(dev, DAVINCI_I2C_PSC_REG, psc); davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh); davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl); - dev_dbg(dev->dev, "CLK = %d\n", clk); + dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk); dev_dbg(dev->dev, "PSC = %d\n", davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG)); dev_dbg(dev->dev, "CLKL = %d\n", davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG)); dev_dbg(dev->dev, "CLKH = %d\n", davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG)); + dev_dbg(dev->dev, "bus_freq = %dkHz, bus_delay = %d\n", + pdata->bus_freq, pdata->bus_delay); /* Take the I2C module out of reset: */ w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); -- cgit v1.2.3 From d868caa177d4487ce1935926498f542a8f67c1cf Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Mon, 14 Jul 2008 22:38:20 +0200 Subject: i2c-davinci: Move dev_dbg statement for more output Previously the dev_dbg only printed if no error. Printing also on an error is more useful Signed-off-by: Troy Kisky Signed-off-by: Kevin Hilman Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-davinci.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 7fdbca17d4a8..85097fdc75e4 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -345,12 +345,11 @@ i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) for (i = 0; i < num; i++) { ret = i2c_davinci_xfer_msg(adap, &msgs[i], (i == (num - 1))); + dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num, + ret); if (ret < 0) return ret; } - - dev_dbg(dev->dev, "%s:%d ret: %d\n", __func__, __LINE__, ret); - return num; } -- cgit v1.2.3 From 0ab56e20674b41dd0203d16b602aac8d9d26a70a Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Mon, 14 Jul 2008 22:38:20 +0200 Subject: i2c-davinci: Remove useless IVR read Interrupts are enabled at the point where the DAVINCI_I2C_IVR_REG is read, so unless an interrupt happened just at that moment, no interrupt would be pending. Even though documentation implies you should do this, I see no reason. If slave support is added, this read would cause a hard to reproduce bug. Signed-off-by: Troy Kisky Signed-off-by: Kevin Hilman Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-davinci.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 85097fdc75e4..c56f8fe4efe5 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -240,7 +240,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; u32 flag; - u32 stat; u16 w; int r; @@ -264,9 +263,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) init_completion(&dev->cmd_complete); dev->cmd_err = 0; - /* Clear any pending interrupts by reading the IVR */ - stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG); - /* Take I2C out of reset, configure it as master and set the * start bit */ flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST | DAVINCI_I2C_MDR_STT; -- cgit v1.2.3 From 5a0d5f5ffa5d294d895ef54fc220c6182db63998 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Mon, 14 Jul 2008 22:38:21 +0200 Subject: i2c-davinci: Fix signal handling bug If wait_for_completion_interruptible_timeout exits due to a signal, the i2c bus was locking up. Signed-off-by: Troy Kisky Signed-off-by: Kevin Hilman Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-davinci.c | 62 +++++++++++++++++++++++++++++++++------- 1 file changed, 52 insertions(+), 10 deletions(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index c56f8fe4efe5..160857296952 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -85,6 +85,7 @@ #define DAVINCI_I2C_MDR_MST (1 << 10) #define DAVINCI_I2C_MDR_TRX (1 << 9) #define DAVINCI_I2C_MDR_XA (1 << 8) +#define DAVINCI_I2C_MDR_RM (1 << 7) #define DAVINCI_I2C_MDR_IRS (1 << 5) #define DAVINCI_I2C_IMR_AAS (1 << 6) @@ -112,6 +113,7 @@ struct davinci_i2c_dev { u8 *buf; size_t buf_len; int irq; + u8 terminate; struct i2c_adapter adapter; }; @@ -283,20 +285,34 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) MOD_REG_BIT(w, DAVINCI_I2C_IMR_XRDY, 1); davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w); + dev->terminate = 0; /* write the data into mode register */ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); r = wait_for_completion_interruptible_timeout(&dev->cmd_complete, DAVINCI_I2C_TIMEOUT); - dev->buf_len = 0; - if (r < 0) - return r; - if (r == 0) { dev_err(dev->dev, "controller timed out\n"); i2c_davinci_init(dev); + dev->buf_len = 0; return -ETIMEDOUT; } + if (dev->buf_len) { + /* This should be 0 if all bytes were transferred + * or dev->cmd_err denotes an error. + * A signal may have aborted the transfer. + */ + if (r >= 0) { + dev_err(dev->dev, "abnormal termination buf_len=%i\n", + dev->buf_len); + r = -EREMOTEIO; + } + dev->terminate = 1; + wmb(); + dev->buf_len = 0; + } + if (r < 0) + return r; /* no error */ if (likely(!dev->cmd_err)) @@ -354,6 +370,27 @@ static u32 i2c_davinci_func(struct i2c_adapter *adap) return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); } +static void terminate_read(struct davinci_i2c_dev *dev) +{ + u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); + w |= DAVINCI_I2C_MDR_NACK; + davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w); + + /* Throw away data */ + davinci_i2c_read_reg(dev, DAVINCI_I2C_DRR_REG); + if (!dev->terminate) + dev_err(dev->dev, "RDR IRQ while no data requested\n"); +} +static void terminate_write(struct davinci_i2c_dev *dev) +{ + u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); + w |= DAVINCI_I2C_MDR_RM | DAVINCI_I2C_MDR_STP; + davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w); + + if (!dev->terminate) + dev_err(dev->dev, "TDR IRQ while no data to send\n"); +} + /* * Interrupt service routine. This gets called whenever an I2C interrupt * occurs. @@ -374,12 +411,15 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) switch (stat) { case DAVINCI_I2C_IVR_AL: + /* Arbitration lost, must retry */ dev->cmd_err |= DAVINCI_I2C_STR_AL; + dev->buf_len = 0; complete(&dev->cmd_complete); break; case DAVINCI_I2C_IVR_NACK: dev->cmd_err |= DAVINCI_I2C_STR_NACK; + dev->buf_len = 0; complete(&dev->cmd_complete); break; @@ -401,9 +441,10 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, DAVINCI_I2C_IMR_RRDY); - } else - dev_err(dev->dev, "RDR IRQ while no " - "data requested\n"); + } else { + /* signal can terminate transfer */ + terminate_read(dev); + } break; case DAVINCI_I2C_IVR_XRDY: @@ -420,9 +461,10 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w); - } else - dev_err(dev->dev, "TDR IRQ while no data to " - "send\n"); + } else { + /* signal can terminate transfer */ + terminate_write(dev); + } break; case DAVINCI_I2C_IVR_SCD: -- cgit v1.2.3 From 2e7437879897a4185bd84478a0451e5367dee7ed Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Mon, 14 Jul 2008 22:38:21 +0200 Subject: i2c-davinci: Initialize cmd_complete sooner If an interrupt happens before an I2c master read/write, complete is called on uninitialized structure. Signed-off-by: Troy Kisky Signed-off-by: Kevin Hilman Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-davinci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 160857296952..af3846eda985 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -262,7 +262,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len); - init_completion(&dev->cmd_complete); + INIT_COMPLETION(dev->cmd_complete); dev->cmd_err = 0; /* Take I2C out of reset, configure it as master and set the @@ -519,6 +519,7 @@ static int davinci_i2c_probe(struct platform_device *pdev) goto err_release_region; } + init_completion(&dev->cmd_complete); dev->dev = get_device(&pdev->dev); dev->irq = irq->start; platform_set_drvdata(pdev, dev); -- cgit v1.2.3 From 279e902445557897707d325182916a6e28ba80de Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:21 +0200 Subject: i2c-nforce2: Add support for multiplexing on the Tyan S4985 Just like the Tyan S4882, the S4985 uses a multiplexer to give access to all 16 memory module SPD EEPROMs. This specific i2c-nforce2-s4985 driver adds support for this. It is heavily based on the older i2c-amd756-s4882 driver. As more mainboards will use multiplexer chips, we will have to find a way to support them without having to write a new specfic driver for each. The recent changes to the i2c subsystem should help us, and the new gpio subsystem might help, too. Signed-off-by: Jean Delvare --- drivers/i2c/busses/Kconfig | 13 ++ drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-nforce2-s4985.c | 257 +++++++++++++++++++++++++++++++++ drivers/i2c/busses/i2c-nforce2.c | 16 ++ 4 files changed, 287 insertions(+) create mode 100644 drivers/i2c/busses/i2c-nforce2-s4985.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 48438cc5d0ca..00d76e13588f 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -315,6 +315,19 @@ config I2C_NFORCE2 This driver can also be built as a module. If so, the module will be called i2c-nforce2. +config I2C_NFORCE2_S4985 + tristate "SMBus multiplexing on the Tyan S4985" + depends on I2C_NFORCE2 && EXPERIMENTAL + help + Enabling this option will add specific SMBus support for the Tyan + S4985 motherboard. On this 4-CPU board, the SMBus is multiplexed + over 4 different channels, where the various memory module EEPROMs + live. Saying yes here will give you access to these in addition + to the trunk. + + This driver can also be built as a module. If so, the module + will be called i2c-nforce2-s4985. + config I2C_OCORES tristate "OpenCores I2C Controller" depends on EXPERIMENTAL diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index e8c882a5ea66..8b0a8c257905 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o +obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c new file mode 100644 index 000000000000..6a8995dfd0bb --- /dev/null +++ b/drivers/i2c/busses/i2c-nforce2-s4985.c @@ -0,0 +1,257 @@ +/* + * i2c-nforce2-s4985.c - i2c-nforce2 extras for the Tyan S4985 motherboard + * + * Copyright (C) 2008 Jean Delvare + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * We select the channels by sending commands to the Philips + * PCA9556 chip at I2C address 0x18. The main adapter is used for + * the non-multiplexed part of the bus, and 4 virtual adapters + * are defined for the multiplexed addresses: 0x50-0x53 (memory + * module EEPROM) located on channels 1-4. We define one virtual + * adapter per CPU, which corresponds to one multiplexed channel: + * CPU0: virtual adapter 1, channel 1 + * CPU1: virtual adapter 2, channel 2 + * CPU2: virtual adapter 3, channel 3 + * CPU3: virtual adapter 4, channel 4 + */ + +#include +#include +#include +#include +#include +#include + +extern struct i2c_adapter *nforce2_smbus; + +static struct i2c_adapter *s4985_adapter; +static struct i2c_algorithm *s4985_algo; + +/* Wrapper access functions for multiplexed SMBus */ +static DEFINE_MUTEX(nforce2_lock); + +static s32 nforce2_access_virt0(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data *data) +{ + int error; + + /* We exclude the multiplexed addresses */ + if ((addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30 + || addr == 0x18) + return -ENXIO; + + mutex_lock(&nforce2_lock); + error = nforce2_smbus->algo->smbus_xfer(adap, addr, flags, read_write, + command, size, data); + mutex_unlock(&nforce2_lock); + + return error; +} + +/* We remember the last used channels combination so as to only switch + channels when it is really needed. This greatly reduces the SMBus + overhead, but also assumes that nobody will be writing to the PCA9556 + in our back. */ +static u8 last_channels; + +static inline s32 nforce2_access_channel(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data *data, + u8 channels) +{ + int error; + + /* We exclude the non-multiplexed addresses */ + if ((addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30) + return -ENXIO; + + mutex_lock(&nforce2_lock); + if (last_channels != channels) { + union i2c_smbus_data mplxdata; + mplxdata.byte = channels; + + error = nforce2_smbus->algo->smbus_xfer(adap, 0x18, 0, + I2C_SMBUS_WRITE, 0x01, + I2C_SMBUS_BYTE_DATA, + &mplxdata); + if (error) + goto UNLOCK; + last_channels = channels; + } + error = nforce2_smbus->algo->smbus_xfer(adap, addr, flags, read_write, + command, size, data); + +UNLOCK: + mutex_unlock(&nforce2_lock); + return error; +} + +static s32 nforce2_access_virt1(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data *data) +{ + /* CPU0: channel 1 enabled */ + return nforce2_access_channel(adap, addr, flags, read_write, command, + size, data, 0x02); +} + +static s32 nforce2_access_virt2(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data *data) +{ + /* CPU1: channel 2 enabled */ + return nforce2_access_channel(adap, addr, flags, read_write, command, + size, data, 0x04); +} + +static s32 nforce2_access_virt3(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data *data) +{ + /* CPU2: channel 3 enabled */ + return nforce2_access_channel(adap, addr, flags, read_write, command, + size, data, 0x08); +} + +static s32 nforce2_access_virt4(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data *data) +{ + /* CPU3: channel 4 enabled */ + return nforce2_access_channel(adap, addr, flags, read_write, command, + size, data, 0x10); +} + +static int __init nforce2_s4985_init(void) +{ + int i, error; + union i2c_smbus_data ioconfig; + + /* Unregister physical bus */ + if (!nforce2_smbus) + return -ENODEV; + error = i2c_del_adapter(nforce2_smbus); + if (error) { + dev_err(&nforce2_smbus->dev, "Physical bus removal failed\n"); + goto ERROR0; + } + + printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4985\n"); + /* Define the 5 virtual adapters and algorithms structures */ + s4985_adapter = kzalloc(5 * sizeof(struct i2c_adapter), GFP_KERNEL); + if (!s4985_adapter) { + error = -ENOMEM; + goto ERROR1; + } + s4985_algo = kzalloc(5 * sizeof(struct i2c_algorithm), GFP_KERNEL); + if (!s4985_algo) { + error = -ENOMEM; + goto ERROR2; + } + + /* Fill in the new structures */ + s4985_algo[0] = *(nforce2_smbus->algo); + s4985_algo[0].smbus_xfer = nforce2_access_virt0; + s4985_adapter[0] = *nforce2_smbus; + s4985_adapter[0].algo = s4985_algo; + s4985_adapter[0].dev.parent = nforce2_smbus->dev.parent; + for (i = 1; i < 5; i++) { + s4985_algo[i] = *(nforce2_smbus->algo); + s4985_adapter[i] = *nforce2_smbus; + snprintf(s4985_adapter[i].name, sizeof(s4985_adapter[i].name), + "SMBus nForce2 adapter (CPU%d)", i - 1); + s4985_adapter[i].algo = s4985_algo + i; + s4985_adapter[i].dev.parent = nforce2_smbus->dev.parent; + } + s4985_algo[1].smbus_xfer = nforce2_access_virt1; + s4985_algo[2].smbus_xfer = nforce2_access_virt2; + s4985_algo[3].smbus_xfer = nforce2_access_virt3; + s4985_algo[4].smbus_xfer = nforce2_access_virt4; + + /* Configure the PCA9556 multiplexer */ + ioconfig.byte = 0x00; /* All I/O to output mode */ + error = nforce2_smbus->algo->smbus_xfer(nforce2_smbus, 0x18, 0, + I2C_SMBUS_WRITE, 0x03, + I2C_SMBUS_BYTE_DATA, &ioconfig); + if (error) { + dev_err(&nforce2_smbus->dev, "PCA9556 configuration failed\n"); + error = -EIO; + goto ERROR3; + } + + /* Register virtual adapters */ + for (i = 0; i < 5; i++) { + error = i2c_add_adapter(s4985_adapter + i); + if (error) { + dev_err(&nforce2_smbus->dev, + "Virtual adapter %d registration " + "failed, module not inserted\n", i); + for (i--; i >= 0; i--) + i2c_del_adapter(s4985_adapter + i); + goto ERROR3; + } + } + + return 0; + +ERROR3: + kfree(s4985_algo); + s4985_algo = NULL; +ERROR2: + kfree(s4985_adapter); + s4985_adapter = NULL; +ERROR1: + /* Restore physical bus */ + i2c_add_adapter(nforce2_smbus); +ERROR0: + return error; +} + +static void __exit nforce2_s4985_exit(void) +{ + if (s4985_adapter) { + int i; + + for (i = 0; i < 5; i++) + i2c_del_adapter(s4985_adapter+i); + kfree(s4985_adapter); + s4985_adapter = NULL; + } + kfree(s4985_algo); + s4985_algo = NULL; + + /* Restore physical bus */ + if (i2c_add_adapter(nforce2_smbus)) + dev_err(&nforce2_smbus->dev, "Physical bus restoration " + "failed\n"); +} + +MODULE_AUTHOR("Jean Delvare "); +MODULE_DESCRIPTION("S4985 SMBus multiplexing"); +MODULE_LICENSE("GPL"); + +module_init(nforce2_s4985_init); +module_exit(nforce2_s4985_exit); diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 43c9f8df9509..f95efff9b3d1 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -124,6 +124,20 @@ static struct dmi_system_id __devinitdata nforce2_dmi_blacklist2[] = { static struct pci_driver nforce2_driver; +/* For multiplexing support, we need a global reference to the 1st + SMBus channel */ +#if defined CONFIG_I2C_NFORCE2_S4985 || defined CONFIG_I2C_NFORCE2_S4985_MODULE +struct i2c_adapter *nforce2_smbus; +EXPORT_SYMBOL_GPL(nforce2_smbus); + +static void nforce2_set_reference(struct i2c_adapter *adap) +{ + nforce2_smbus = adap; +} +#else +static inline void nforce2_set_reference(struct i2c_adapter *adap) { } +#endif + static void nforce2_abort(struct i2c_adapter *adap) { struct nforce2_smbus *smbus = adap->algo_data; @@ -398,6 +412,7 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_ return -ENODEV; } + nforce2_set_reference(&smbuses[0].adapter); return 0; } @@ -406,6 +421,7 @@ static void __devexit nforce2_remove(struct pci_dev *dev) { struct nforce2_smbus *smbuses = (void*) pci_get_drvdata(dev); + nforce2_set_reference(NULL); if (smbuses[0].base) { i2c_del_adapter(&smbuses[0].adapter); release_region(smbuses[0].base, smbuses[0].size); -- cgit v1.2.3 From 20a9b6e7c303f2a6f9afe17c0997bc9a3c734442 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 14 Jul 2008 22:38:22 +0200 Subject: i2c: Remove 3 deprecated bus drivers This patch contains the scheduled removal of i2c-i810, i2c-prosavage and i2c-savage4. Signed-off-by: Adrian Bunk Signed-off-by: Jean Delvare --- Documentation/feature-removal-schedule.txt | 7 - Documentation/i2c/busses/i2c-i810 | 47 ----- Documentation/i2c/busses/i2c-prosavage | 23 -- Documentation/i2c/busses/i2c-savage4 | 26 --- drivers/i2c/busses/Kconfig | 52 ----- drivers/i2c/busses/Makefile | 3 - drivers/i2c/busses/i2c-i810.c | 260 ----------------------- drivers/i2c/busses/i2c-prosavage.c | 325 ----------------------------- drivers/i2c/busses/i2c-savage4.c | 185 ---------------- include/linux/i2c-id.h | 1 - 10 files changed, 929 deletions(-) delete mode 100644 Documentation/i2c/busses/i2c-i810 delete mode 100644 Documentation/i2c/busses/i2c-prosavage delete mode 100644 Documentation/i2c/busses/i2c-savage4 delete mode 100644 drivers/i2c/busses/i2c-i810.c delete mode 100644 drivers/i2c/busses/i2c-prosavage.c delete mode 100644 drivers/i2c/busses/i2c-savage4.c diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 46ece3fba6f9..65a1482457a8 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -222,13 +222,6 @@ Who: Thomas Gleixner --------------------------- -What: i2c-i810, i2c-prosavage and i2c-savage4 -When: May 2008 -Why: These drivers are superseded by i810fb, intelfb and savagefb. -Who: Jean Delvare - ---------------------------- - What (Why): - include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files (superseded by xt_TOS/xt_tos target & match) diff --git a/Documentation/i2c/busses/i2c-i810 b/Documentation/i2c/busses/i2c-i810 deleted file mode 100644 index 778210ee1583..000000000000 --- a/Documentation/i2c/busses/i2c-i810 +++ /dev/null @@ -1,47 +0,0 @@ -Kernel driver i2c-i810 - -Supported adapters: - * Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH) - * Intel 82845G (GMCH) - -Authors: - Frodo Looijaard , - Philip Edelbrock , - Kyösti Mälkki , - Ralph Metzler , - Mark D. Studebaker - -Main contact: Mark Studebaker - -Description ------------ - -WARNING: If you have an '810' or '815' motherboard, your standard I2C -temperature sensors are most likely on the 801's I2C bus. You want the -i2c-i801 driver for those, not this driver. - -Now for the i2c-i810... - -The GMCH chip contains two I2C interfaces. - -The first interface is used for DDC (Data Display Channel) which is a -serial channel through the VGA monitor connector to a DDC-compliant -monitor. This interface is defined by the Video Electronics Standards -Association (VESA). The standards are available for purchase at -http://www.vesa.org . - -The second interface is a general-purpose I2C bus. It may be connected to a -TV-out chip such as the BT869 or possibly to a digital flat-panel display. - -Features --------- - -Both busses use the i2c-algo-bit driver for 'bit banging' -and support for specific transactions is provided by i2c-algo-bit. - -Issues ------- - -If you enable bus testing in i2c-algo-bit (insmod i2c-algo-bit bit_test=1), -the test may fail; if so, the i2c-i810 driver won't be inserted. However, -we think this has been fixed. diff --git a/Documentation/i2c/busses/i2c-prosavage b/Documentation/i2c/busses/i2c-prosavage deleted file mode 100644 index 703687902511..000000000000 --- a/Documentation/i2c/busses/i2c-prosavage +++ /dev/null @@ -1,23 +0,0 @@ -Kernel driver i2c-prosavage - -Supported adapters: - - S3/VIA KM266/VT8375 aka ProSavage8 - S3/VIA KM133/VT8365 aka Savage4 - -Author: Henk Vergonet - -Description ------------ - -The Savage4 chips contain two I2C interfaces (aka a I2C 'master' or -'host'). - -The first interface is used for DDC (Data Display Channel) which is a -serial channel through the VGA monitor connector to a DDC-compliant -monitor. This interface is defined by the Video Electronics Standards -Association (VESA). The standards are available for purchase at -http://www.vesa.org . The second interface is a general-purpose I2C bus. - -Usefull for gaining access to the TV Encoder chips. - diff --git a/Documentation/i2c/busses/i2c-savage4 b/Documentation/i2c/busses/i2c-savage4 deleted file mode 100644 index 6ecceab618d3..000000000000 --- a/Documentation/i2c/busses/i2c-savage4 +++ /dev/null @@ -1,26 +0,0 @@ -Kernel driver i2c-savage4 - -Supported adapters: - * Savage4 - * Savage2000 - -Authors: - Alexander Wold , - Mark D. Studebaker - -Description ------------ - -The Savage4 chips contain two I2C interfaces (aka a I2C 'master' -or 'host'). - -The first interface is used for DDC (Data Display Channel) which is a -serial channel through the VGA monitor connector to a DDC-compliant -monitor. This interface is defined by the Video Electronics Standards -Association (VESA). The standards are available for purchase at -http://www.vesa.org . The DDC bus is not yet supported because its register -is not directly memory-mapped. - -The second interface is a general-purpose I2C bus. This is the only -interface supported by the driver at the moment. - diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 00d76e13588f..b7cce9211838 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -186,26 +186,6 @@ config I2C_I801 This driver can also be built as a module. If so, the module will be called i2c-i801. -config I2C_I810 - tristate "Intel 810/815 (DEPRECATED)" - default n - depends on PCI - select I2C_ALGOBIT - help - If you say yes to this option, support will be included for the Intel - 810/815 family of mainboard I2C interfaces. Specifically, the - following versions of the chipset are supported: - i810AA - i810AB - i810E - i815 - i845G - - This driver is deprecated in favor of the i810fb and intelfb drivers. - - This driver can also be built as a module. If so, the module - will be called i2c-i810. - config I2C_PXA tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)" depends on EXPERIMENTAL && ARCH_PXA @@ -402,24 +382,6 @@ config I2C_PASEMI help Supports the PA Semi PWRficient on-chip SMBus interfaces. -config I2C_PROSAVAGE - tristate "S3/VIA (Pro)Savage (DEPRECATED)" - default n - depends on PCI - select I2C_ALGOBIT - help - If you say yes to this option, support will be included for the - I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8 - graphics processors. - chipsets supported: - S3/VIA KM266/VT8375 aka ProSavage8 - S3/VIA KM133/VT8365 aka Savage4 - - This driver is deprecated in favor of the savagefb driver. - - This support is also available as a module. If so, the module - will be called i2c-prosavage. - config I2C_S3C2410 tristate "S3C2410 I2C Driver" depends on ARCH_S3C2410 @@ -427,20 +389,6 @@ config I2C_S3C2410 Say Y here to include support for I2C controller in the Samsung S3C2410 based System-on-Chip devices. -config I2C_SAVAGE4 - tristate "S3 Savage 4 (DEPRECATED)" - default n - depends on PCI - select I2C_ALGOBIT - help - If you say yes to this option, support will be included for the - S3 Savage 4 I2C interface. - - This driver is deprecated in favor of the savagefb driver. - - This driver can also be built as a module. If so, the module - will be called i2c-savage4. - config I2C_SIBYTE tristate "SiByte SMBus interface" depends on SIBYTE_SB1xxx_SOC diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 8b0a8c257905..81bb407d24cc 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o obj-$(CONFIG_I2C_I801) += i2c-i801.o -obj-$(CONFIG_I2C_I810) += i2c-i810.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o @@ -35,10 +34,8 @@ obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o -obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o -obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c deleted file mode 100644 index 42e8d94c276f..000000000000 --- a/drivers/i2c/busses/i2c-i810.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - i2c-i810.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 1998, 1999, 2000 Frodo Looijaard , - Philip Edelbrock , - Ralph Metzler , and - Mark D. Studebaker - - Based on code written by Ralph Metzler and - Simon Vogl - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ -/* - This interfaces to the I810/I815 to provide access to - the DDC Bus and the I2C Bus. - - SUPPORTED DEVICES PCI ID - i810AA 7121 - i810AB 7123 - i810E 7125 - i815 1132 - i845G 2562 -*/ - -#include -#include -#include -#include -#include -#include -#include - -/* GPIO register locations */ -#define I810_IOCONTROL_OFFSET 0x5000 -#define I810_HVSYNC 0x00 /* not used */ -#define I810_GPIOA 0x10 -#define I810_GPIOB 0x14 - -/* bit locations in the registers */ -#define SCL_DIR_MASK 0x0001 -#define SCL_DIR 0x0002 -#define SCL_VAL_MASK 0x0004 -#define SCL_VAL_OUT 0x0008 -#define SCL_VAL_IN 0x0010 -#define SDA_DIR_MASK 0x0100 -#define SDA_DIR 0x0200 -#define SDA_VAL_MASK 0x0400 -#define SDA_VAL_OUT 0x0800 -#define SDA_VAL_IN 0x1000 - -/* initialization states */ -#define INIT1 0x1 -#define INIT2 0x2 -#define INIT3 0x4 - -/* delays */ -#define CYCLE_DELAY 10 -#define TIMEOUT (HZ / 2) - -static void __iomem *ioaddr; - -/* The i810 GPIO registers have individual masks for each bit - so we never have to read before writing. Nice. */ - -static void bit_i810i2c_setscl(void *data, int val) -{ - writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK, - ioaddr + I810_GPIOB); - readl(ioaddr + I810_GPIOB); /* flush posted write */ -} - -static void bit_i810i2c_setsda(void *data, int val) -{ - writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK, - ioaddr + I810_GPIOB); - readl(ioaddr + I810_GPIOB); /* flush posted write */ -} - -/* The GPIO pins are open drain, so the pins could always remain outputs. - However, some chip versions don't latch the inputs unless they - are set as inputs. - We rely on the i2c-algo-bit routines to set the pins high before - reading the input from other chips. Following guidance in the 815 - prog. ref. guide, we do a "dummy write" of 0 to the register before - reading which forces the input value to be latched. We presume this - applies to the 810 as well; shouldn't hurt anyway. This is necessary to get - i2c_algo_bit bit_test=1 to pass. */ - -static int bit_i810i2c_getscl(void *data) -{ - writel(SCL_DIR_MASK, ioaddr + I810_GPIOB); - writel(0, ioaddr + I810_GPIOB); - return (0 != (readl(ioaddr + I810_GPIOB) & SCL_VAL_IN)); -} - -static int bit_i810i2c_getsda(void *data) -{ - writel(SDA_DIR_MASK, ioaddr + I810_GPIOB); - writel(0, ioaddr + I810_GPIOB); - return (0 != (readl(ioaddr + I810_GPIOB) & SDA_VAL_IN)); -} - -static void bit_i810ddc_setscl(void *data, int val) -{ - writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK, - ioaddr + I810_GPIOA); - readl(ioaddr + I810_GPIOA); /* flush posted write */ -} - -static void bit_i810ddc_setsda(void *data, int val) -{ - writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK, - ioaddr + I810_GPIOA); - readl(ioaddr + I810_GPIOA); /* flush posted write */ -} - -static int bit_i810ddc_getscl(void *data) -{ - writel(SCL_DIR_MASK, ioaddr + I810_GPIOA); - writel(0, ioaddr + I810_GPIOA); - return (0 != (readl(ioaddr + I810_GPIOA) & SCL_VAL_IN)); -} - -static int bit_i810ddc_getsda(void *data) -{ - writel(SDA_DIR_MASK, ioaddr + I810_GPIOA); - writel(0, ioaddr + I810_GPIOA); - return (0 != (readl(ioaddr + I810_GPIOA) & SDA_VAL_IN)); -} - -static int config_i810(struct pci_dev *dev) -{ - unsigned long cadr; - - /* map I810 memory */ - cadr = dev->resource[1].start; - cadr += I810_IOCONTROL_OFFSET; - cadr &= PCI_BASE_ADDRESS_MEM_MASK; - ioaddr = ioremap_nocache(cadr, 0x1000); - if (ioaddr) { - bit_i810i2c_setscl(NULL, 1); - bit_i810i2c_setsda(NULL, 1); - bit_i810ddc_setscl(NULL, 1); - bit_i810ddc_setsda(NULL, 1); - return 0; - } - return -ENODEV; -} - -static struct i2c_algo_bit_data i810_i2c_bit_data = { - .setsda = bit_i810i2c_setsda, - .setscl = bit_i810i2c_setscl, - .getsda = bit_i810i2c_getsda, - .getscl = bit_i810i2c_getscl, - .udelay = CYCLE_DELAY, - .timeout = TIMEOUT, -}; - -static struct i2c_adapter i810_i2c_adapter = { - .owner = THIS_MODULE, - .id = I2C_HW_B_I810, - .name = "I810/I815 I2C Adapter", - .algo_data = &i810_i2c_bit_data, -}; - -static struct i2c_algo_bit_data i810_ddc_bit_data = { - .setsda = bit_i810ddc_setsda, - .setscl = bit_i810ddc_setscl, - .getsda = bit_i810ddc_getsda, - .getscl = bit_i810ddc_getscl, - .udelay = CYCLE_DELAY, - .timeout = TIMEOUT, -}; - -static struct i2c_adapter i810_ddc_adapter = { - .owner = THIS_MODULE, - .id = I2C_HW_B_I810, - .name = "I810/I815 DDC Adapter", - .algo_data = &i810_ddc_bit_data, -}; - -static struct pci_device_id i810_ids[] __devinitdata = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG1) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810E_IG) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_IG) }, - { 0, }, -}; - -MODULE_DEVICE_TABLE (pci, i810_ids); - -static int __devinit i810_probe(struct pci_dev *dev, const struct pci_device_id *id) -{ - int retval; - - retval = config_i810(dev); - if (retval) - return retval; - dev_info(&dev->dev, "i810/i815 i2c device found.\n"); - - /* set up the sysfs linkage to our parent device */ - i810_i2c_adapter.dev.parent = &dev->dev; - i810_ddc_adapter.dev.parent = &dev->dev; - - retval = i2c_bit_add_bus(&i810_i2c_adapter); - if (retval) - return retval; - retval = i2c_bit_add_bus(&i810_ddc_adapter); - if (retval) - i2c_del_adapter(&i810_i2c_adapter); - return retval; -} - -static void __devexit i810_remove(struct pci_dev *dev) -{ - i2c_del_adapter(&i810_ddc_adapter); - i2c_del_adapter(&i810_i2c_adapter); - iounmap(ioaddr); -} - -static struct pci_driver i810_driver = { - .name = "i810_smbus", - .id_table = i810_ids, - .probe = i810_probe, - .remove = __devexit_p(i810_remove), -}; - -static int __init i2c_i810_init(void) -{ - return pci_register_driver(&i810_driver); -} - -static void __exit i2c_i810_exit(void) -{ - pci_unregister_driver(&i810_driver); -} - -MODULE_AUTHOR("Frodo Looijaard , " - "Philip Edelbrock , " - "Ralph Metzler , " - "and Mark D. Studebaker "); -MODULE_DESCRIPTION("I810/I815 I2C/DDC driver"); -MODULE_LICENSE("GPL"); - -module_init(i2c_i810_init); -module_exit(i2c_i810_exit); diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c deleted file mode 100644 index 07c1f1e27df1..000000000000 --- a/drivers/i2c/busses/i2c-prosavage.c +++ /dev/null @@ -1,325 +0,0 @@ -/* - * kernel/busses/i2c-prosavage.c - * - * i2c bus driver for S3/VIA 8365/8375 graphics processor. - * Copyright (c) 2003 Henk Vergonet - * Based on code written by: - * Frodo Looijaard , - * Philip Edelbrock , - * Ralph Metzler , and - * Mark D. Studebaker - * Simon Vogl - * and others - * - * Please read the lm_sensors documentation for details on use. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ -/* 18-05-2003 HVE - created - * 14-06-2003 HVE - adapted for lm_sensors2 - * 17-06-2003 HVE - linux 2.5.xx compatible - * 18-06-2003 HVE - codingstyle - * 21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx - * codingstyle, mmio enabled - * - * This driver interfaces to the I2C bus of the VIA north bridge embedded - * ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips. - * - * Graphics cores: - * S3/VIA KM266/VT8375 aka ProSavage8 - * S3/VIA KM133/VT8365 aka Savage4 - * - * Two serial busses are implemented: - * SERIAL1 - I2C serial communications interface - * SERIAL2 - DDC2 monitor communications interface - * - * Tested on a FX41 mainboard, see http://www.shuttle.com - * - * - * TODO: - * - integration with prosavage framebuffer device - * (Additional documentation needed :( - */ - -#include -#include -#include -#include -#include -#include - -/* - * driver configuration - */ -#define MAX_BUSSES 2 - -struct s_i2c_bus { - void __iomem *mmvga; - int i2c_reg; - int adap_ok; - struct i2c_adapter adap; - struct i2c_algo_bit_data algo; -}; - -struct s_i2c_chip { - void __iomem *mmio; - struct s_i2c_bus i2c_bus[MAX_BUSSES]; -}; - - -/* - * i2c configuration - */ -#define CYCLE_DELAY 10 -#define TIMEOUT (HZ / 2) - - -/* - * S3/VIA 8365/8375 registers - */ -#define VGA_CR_IX 0x3d4 -#define VGA_CR_DATA 0x3d5 - -#define CR_SERIAL1 0xa0 /* I2C serial communications interface */ -#define MM_SERIAL1 0xff20 -#define CR_SERIAL2 0xb1 /* DDC2 monitor communications interface */ - -/* based on vt8365 documentation */ -#define I2C_ENAB 0x10 -#define I2C_SCL_OUT 0x01 -#define I2C_SDA_OUT 0x02 -#define I2C_SCL_IN 0x04 -#define I2C_SDA_IN 0x08 - -#define SET_CR_IX(p, val) writeb((val), (p)->mmvga + VGA_CR_IX) -#define SET_CR_DATA(p, val) writeb((val), (p)->mmvga + VGA_CR_DATA) -#define GET_CR_DATA(p) readb((p)->mmvga + VGA_CR_DATA) - - -/* - * Serial bus line handling - * - * serial communications register as parameter in private data - * - * TODO: locks with other code sections accessing video registers? - */ -static void bit_s3via_setscl(void *bus, int val) -{ - struct s_i2c_bus *p = (struct s_i2c_bus *)bus; - unsigned int r; - - SET_CR_IX(p, p->i2c_reg); - r = GET_CR_DATA(p); - r |= I2C_ENAB; - if (val) { - r |= I2C_SCL_OUT; - } else { - r &= ~I2C_SCL_OUT; - } - SET_CR_DATA(p, r); -} - -static void bit_s3via_setsda(void *bus, int val) -{ - struct s_i2c_bus *p = (struct s_i2c_bus *)bus; - unsigned int r; - - SET_CR_IX(p, p->i2c_reg); - r = GET_CR_DATA(p); - r |= I2C_ENAB; - if (val) { - r |= I2C_SDA_OUT; - } else { - r &= ~I2C_SDA_OUT; - } - SET_CR_DATA(p, r); -} - -static int bit_s3via_getscl(void *bus) -{ - struct s_i2c_bus *p = (struct s_i2c_bus *)bus; - - SET_CR_IX(p, p->i2c_reg); - return (0 != (GET_CR_DATA(p) & I2C_SCL_IN)); -} - -static int bit_s3via_getsda(void *bus) -{ - struct s_i2c_bus *p = (struct s_i2c_bus *)bus; - - SET_CR_IX(p, p->i2c_reg); - return (0 != (GET_CR_DATA(p) & I2C_SDA_IN)); -} - - -/* - * adapter initialisation - */ -static int i2c_register_bus(struct pci_dev *dev, struct s_i2c_bus *p, void __iomem *mmvga, u32 i2c_reg) -{ - int ret; - p->adap.owner = THIS_MODULE; - p->adap.id = I2C_HW_B_S3VIA; - p->adap.algo_data = &p->algo; - p->adap.dev.parent = &dev->dev; - p->algo.setsda = bit_s3via_setsda; - p->algo.setscl = bit_s3via_setscl; - p->algo.getsda = bit_s3via_getsda; - p->algo.getscl = bit_s3via_getscl; - p->algo.udelay = CYCLE_DELAY; - p->algo.timeout = TIMEOUT; - p->algo.data = p; - p->mmvga = mmvga; - p->i2c_reg = i2c_reg; - - ret = i2c_bit_add_bus(&p->adap); - if (ret) { - return ret; - } - - p->adap_ok = 1; - return 0; -} - - -/* - * Cleanup stuff - */ -static void prosavage_remove(struct pci_dev *dev) -{ - struct s_i2c_chip *chip; - int i, ret; - - chip = (struct s_i2c_chip *)pci_get_drvdata(dev); - - if (!chip) { - return; - } - for (i = MAX_BUSSES - 1; i >= 0; i--) { - if (chip->i2c_bus[i].adap_ok == 0) - continue; - - ret = i2c_del_adapter(&chip->i2c_bus[i].adap); - if (ret) { - dev_err(&dev->dev, "%s not removed\n", - chip->i2c_bus[i].adap.name); - } - } - if (chip->mmio) { - iounmap(chip->mmio); - } - kfree(chip); -} - - -/* - * Detect chip and initialize it - */ -static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id) -{ - int ret; - unsigned long base, len; - struct s_i2c_chip *chip; - struct s_i2c_bus *bus; - - pci_set_drvdata(dev, kzalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); - chip = (struct s_i2c_chip *)pci_get_drvdata(dev); - if (chip == NULL) { - return -ENOMEM; - } - - base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK; - len = dev->resource[0].end - base + 1; - chip->mmio = ioremap_nocache(base, len); - - if (chip->mmio == NULL) { - dev_err(&dev->dev, "ioremap failed\n"); - prosavage_remove(dev); - return -ENODEV; - } - - - /* - * Chip initialisation - */ - /* Unlock Extended IO Space ??? */ - - - /* - * i2c bus registration - */ - bus = &chip->i2c_bus[0]; - snprintf(bus->adap.name, sizeof(bus->adap.name), - "ProSavage I2C bus at %02x:%02x.%x", - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); - ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1); - if (ret) { - goto err_adap; - } - /* - * ddc bus registration - */ - bus = &chip->i2c_bus[1]; - snprintf(bus->adap.name, sizeof(bus->adap.name), - "ProSavage DDC bus at %02x:%02x.%x", - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); - ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2); - if (ret) { - goto err_adap; - } - return 0; -err_adap: - dev_err(&dev->dev, "%s failed\n", bus->adap.name); - prosavage_remove(dev); - return ret; -} - - -/* - * Data for PCI driver interface - */ -static struct pci_device_id prosavage_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_SAVAGE4) }, - { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_PROSAVAGE8) }, - { 0, }, -}; - -MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl); - -static struct pci_driver prosavage_driver = { - .name = "prosavage_smbus", - .id_table = prosavage_pci_tbl, - .probe = prosavage_probe, - .remove = prosavage_remove, -}; - -static int __init i2c_prosavage_init(void) -{ - return pci_register_driver(&prosavage_driver); -} - -static void __exit i2c_prosavage_exit(void) -{ - pci_unregister_driver(&prosavage_driver); -} - -MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl); -MODULE_AUTHOR("Henk Vergonet"); -MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver"); -MODULE_LICENSE("GPL"); - -module_init (i2c_prosavage_init); -module_exit (i2c_prosavage_exit); diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c deleted file mode 100644 index 8adf4abaa035..000000000000 --- a/drivers/i2c/busses/i2c-savage4.c +++ /dev/null @@ -1,185 +0,0 @@ -/* - i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (C) 1998-2003 The LM Sensors Team - Alexander Wold - Mark D. Studebaker - - Based on i2c-voodoo3.c. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* This interfaces to the I2C bus of the Savage4 to gain access to - the BT869 and possibly other I2C devices. The DDC bus is not - yet supported because its register is not memory-mapped. -*/ - -#include -#include -#include -#include -#include -#include -#include - -/* device IDs */ -#define PCI_CHIP_SAVAGE4 0x8A22 -#define PCI_CHIP_SAVAGE2000 0x9102 - -#define REG 0xff20 /* Serial Port 1 Register */ - -/* bit locations in the register */ -#define I2C_ENAB 0x00000020 -#define I2C_SCL_OUT 0x00000001 -#define I2C_SDA_OUT 0x00000002 -#define I2C_SCL_IN 0x00000008 -#define I2C_SDA_IN 0x00000010 - -/* delays */ -#define CYCLE_DELAY 10 -#define TIMEOUT (HZ / 2) - - -static void __iomem *ioaddr; - -/* The sav GPIO registers don't have individual masks for each bit - so we always have to read before writing. */ - -static void bit_savi2c_setscl(void *data, int val) -{ - unsigned int r; - r = readl(ioaddr + REG); - if(val) - r |= I2C_SCL_OUT; - else - r &= ~I2C_SCL_OUT; - writel(r, ioaddr + REG); - readl(ioaddr + REG); /* flush posted write */ -} - -static void bit_savi2c_setsda(void *data, int val) -{ - unsigned int r; - r = readl(ioaddr + REG); - if(val) - r |= I2C_SDA_OUT; - else - r &= ~I2C_SDA_OUT; - writel(r, ioaddr + REG); - readl(ioaddr + REG); /* flush posted write */ -} - -/* The GPIO pins are open drain, so the pins always remain outputs. - We rely on the i2c-algo-bit routines to set the pins high before - reading the input from other chips. */ - -static int bit_savi2c_getscl(void *data) -{ - return (0 != (readl(ioaddr + REG) & I2C_SCL_IN)); -} - -static int bit_savi2c_getsda(void *data) -{ - return (0 != (readl(ioaddr + REG) & I2C_SDA_IN)); -} - -/* Configures the chip */ - -static int config_s4(struct pci_dev *dev) -{ - unsigned long cadr; - - /* map memory */ - cadr = dev->resource[0].start; - cadr &= PCI_BASE_ADDRESS_MEM_MASK; - ioaddr = ioremap_nocache(cadr, 0x0080000); - if (ioaddr) { - /* writel(0x8160, ioaddr + REG2); */ - writel(0x00000020, ioaddr + REG); - dev_info(&dev->dev, "Using Savage4 at %p\n", ioaddr); - return 0; - } - return -ENODEV; -} - -static struct i2c_algo_bit_data sav_i2c_bit_data = { - .setsda = bit_savi2c_setsda, - .setscl = bit_savi2c_setscl, - .getsda = bit_savi2c_getsda, - .getscl = bit_savi2c_getscl, - .udelay = CYCLE_DELAY, - .timeout = TIMEOUT -}; - -static struct i2c_adapter savage4_i2c_adapter = { - .owner = THIS_MODULE, - .id = I2C_HW_B_SAVAGE, - .name = "I2C Savage4 adapter", - .algo_data = &sav_i2c_bit_data, -}; - -static struct pci_device_id savage4_ids[] __devinitdata = { - { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4) }, - { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000) }, - { 0, } -}; - -MODULE_DEVICE_TABLE (pci, savage4_ids); - -static int __devinit savage4_probe(struct pci_dev *dev, const struct pci_device_id *id) -{ - int retval; - - retval = config_s4(dev); - if (retval) - return retval; - - /* set up the sysfs linkage to our parent device */ - savage4_i2c_adapter.dev.parent = &dev->dev; - - return i2c_bit_add_bus(&savage4_i2c_adapter); -} - -static void __devexit savage4_remove(struct pci_dev *dev) -{ - i2c_del_adapter(&savage4_i2c_adapter); - iounmap(ioaddr); -} - -static struct pci_driver savage4_driver = { - .name = "savage4_smbus", - .id_table = savage4_ids, - .probe = savage4_probe, - .remove = __devexit_p(savage4_remove), -}; - -static int __init i2c_savage4_init(void) -{ - return pci_register_driver(&savage4_driver); -} - -static void __exit i2c_savage4_exit(void) -{ - pci_unregister_driver(&savage4_driver); -} - -MODULE_AUTHOR("Alexander Wold " - "and Mark D. Studebaker "); -MODULE_DESCRIPTION("Savage4 I2C/SMBus driver"); -MODULE_LICENSE("GPL"); - -module_init(i2c_savage4_init); -module_exit(i2c_savage4_exit); diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 580acc93903e..988e566d3ed5 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -111,7 +111,6 @@ #define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */ #define I2C_HW_B_IOC 0x010011 /* IOC bit-wiggling */ #define I2C_HW_B_IXP2000 0x010016 /* GPIO on IXP2000 systems */ -#define I2C_HW_B_S3VIA 0x010018 /* S3Via ProSavage adapter */ #define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */ #define I2C_HW_B_PCILYNX 0x01001a /* TI PCILynx I2C adapter */ #define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */ -- cgit v1.2.3 From 4d2bee582be1e9da76e0717bad0cfd988c2a5921 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 14 Jul 2008 22:38:22 +0200 Subject: i2c-bfin-twi: Update the dependencies Since only a few Blackfins lack TWI, just list them in a depends statement. Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Jean Delvare --- drivers/i2c/busses/Kconfig | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index b7cce9211838..37f5b84e0e9c 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -101,10 +101,9 @@ config I2C_AU1550 config I2C_BLACKFIN_TWI tristate "Blackfin TWI I2C support" depends on BLACKFIN + depends on !BF561 && !BF531 && !BF532 && !BF533 help - This is the TWI I2C device driver for Blackfin BF522, BF525, - BF527, BF534, BF536, BF537 and BF54x. For other Blackfin processors, - please don't use this driver. + This is the I2C bus driver for Blackfin on-chip TWI interface. This driver can also be built as a module. If so, the module will be called i2c-bfin-twi. -- cgit v1.2.3 From 81fded1f79771809059bdfa721ae5ab9114af545 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 14 Jul 2008 22:38:22 +0200 Subject: i2c: Document standard fault codes Create Documentation/i2c/fault-codes to help standardize fault/error code usage in the I2C stack. It turns out that returning -1 (-EPERM) for everything was not at all helpful. Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- Documentation/i2c/fault-codes | 127 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 127 insertions(+) create mode 100644 Documentation/i2c/fault-codes diff --git a/Documentation/i2c/fault-codes b/Documentation/i2c/fault-codes new file mode 100644 index 000000000000..045765c0b9b5 --- /dev/null +++ b/Documentation/i2c/fault-codes @@ -0,0 +1,127 @@ +This is a summary of the most important conventions for use of fault +codes in the I2C/SMBus stack. + + +A "Fault" is not always an "Error" +---------------------------------- +Not all fault reports imply errors; "page faults" should be a familiar +example. Software often retries idempotent operations after transient +faults. There may be fancier recovery schemes that are appropriate in +some cases, such as re-initializing (and maybe resetting). After such +recovery, triggered by a fault report, there is no error. + +In a similar way, sometimes a "fault" code just reports one defined +result for an operation ... it doesn't indicate that anything is wrong +at all, just that the outcome wasn't on the "golden path". + +In short, your I2C driver code may need to know these codes in order +to respond correctly. Other code may need to rely on YOUR code reporting +the right fault code, so that it can (in turn) behave correctly. + + +I2C and SMBus fault codes +------------------------- +These are returned as negative numbers from most calls, with zero or +some positive number indicating a non-fault return. The specific +numbers associated with these symbols differ between architectures, +though most Linux systems use numbering. + +Note that the descriptions here are not exhaustive. There are other +codes that may be returned, and other cases where these codes should +be returned. However, drivers should not return other codes for these +cases (unless the hardware doesn't provide unique fault reports). + +Also, codes returned by adapter probe methods follow rules which are +specific to their host bus (such as PCI, or the platform bus). + + +EAGAIN + Returned by I2C adapters when they lose arbitration in master + transmit mode: some other master was transmitting different + data at the same time. + + Also returned when trying to invoke an I2C operation in an + atomic context, when some task is already using that I2C bus + to execute some other operation. + +EBADMSG + Returned by SMBus logic when an invalid Packet Error Code byte + is received. This code is a CRC covering all bytes in the + transaction, and is sent before the terminating STOP. This + fault is only reported on read transactions; the SMBus slave + may have a way to report PEC mismatches on writes from the + host. Note that even if PECs are in use, you should not rely + on these as the only way to detect incorrect data transfers. + +EBUSY + Returned by SMBus adapters when the bus was busy for longer + than allowed. This usually indicates some device (maybe the + SMBus adapter) needs some fault recovery (such as resetting), + or that the reset was attempted but failed. + +EINVAL + This rather vague error means an invalid parameter has been + detected before any I/O operation was started. Use a more + specific fault code when you can. + + One example would be a driver trying an SMBus Block Write + with block size outside the range of 1-32 bytes. + +EIO + This rather vague error means something went wrong when + performing an I/O operation. Use a more specific fault + code when you can. + +ENODEV + Returned by driver probe() methods. This is a bit more + specific than ENXIO, implying the problem isn't with the + address, but with the device found there. Driver probes + may verify the device returns *correct* responses, and + return this as appropriate. (The driver core will warn + about probe faults other than ENXIO and ENODEV.) + +ENOMEM + Returned by any component that can't allocate memory when + it needs to do so. + +ENXIO + Returned by I2C adapters to indicate that the address phase + of a transfer didn't get an ACK. While it might just mean + an I2C device was temporarily not responding, usually it + means there's nothing listening at that address. + + Returned by driver probe() methods to indicate that they + found no device to bind to. (ENODEV may also be used.) + +EOPNOTSUPP + Returned by an adapter when asked to perform an operation + that it doesn't, or can't, support. + + For example, this would be returned when an adapter that + doesn't support SMBus block transfers is asked to execute + one. In that case, the driver making that request should + have verified that functionality was supported before it + made that block transfer request. + + Similarly, if an I2C adapter can't execute all legal I2C + messages, it should return this when asked to perform a + transaction it can't. (These limitations can't be seen in + the adapter's functionality mask, since the assumption is + that if an adapter supports I2C it supports all of I2C.) + +EPROTO + Returned when slave does not conform to the relevant I2C + or SMBus (or chip-specific) protocol specifications. One + case is when the length of an SMBus block data response + (from the SMBus slave) is outside the range 1-32 bytes. + +ETIMEDOUT + This is returned by drivers when an operation took too much + time, and was aborted before it completed. + + SMBus adapters may return it when an operation took more + time than allowed by the SMBus specification; for example, + when a slave stretches clocks too far. I2C has no such + timeouts, but it's normal for I2C adapters to impose some + arbitrary limits (much longer than SMBus!) too. + -- cgit v1.2.3 From 75415490d6adc1aecbf0cade0785b007957d0cfe Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:22 +0200 Subject: i2c-core: Remove needless include i2c-core doesn't use seq files, so doesn't need to include . Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index f489683fd15f..bb5c215a24e0 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 24a5bb7b1838dc4524dd353224e2aa09c22cac3b Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 14 Jul 2008 22:38:23 +0200 Subject: i2c-core: Return -Errno, not -1 More updates to the I2C stack's fault reporting: make the core stop returning "-1" (usually "-EPERM") for all faults. Instead, pass lower level fault code up the stack, or return some appropriate errno. This patch happens to touch almost exclusively SMBus calls. Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- Documentation/i2c/writing-clients | 8 ++-- drivers/i2c/i2c-core.c | 97 +++++++++++++++++++++------------------ 2 files changed, 57 insertions(+), 48 deletions(-) diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index d4cd4126d1ad..ba5d1971f35f 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -598,10 +598,10 @@ be added back later if needed: u8 command, u8 length, u8 *values) -All these transactions return -1 on failure. The 'write' transactions -return 0 on success; the 'read' transactions return the read value, except -for read_block, which returns the number of values read. The block buffers -need not be longer than 32 bytes. +All these transactions return a negative errno value on failure. The 'write' +transactions return 0 on success; the 'read' transactions return the read +value, except for block transactions, which return the number of values +read. The block buffers need not be longer than 32 bytes. You can read the file `smbus-protocol' for more information about the actual SMBus protocol. diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index bb5c215a24e0..937f1dcbf3d7 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -974,7 +974,7 @@ int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num) return ret; } else { dev_dbg(&adap->dev, "I2C level transfers not supported\n"); - return -ENOSYS; + return -EOPNOTSUPP; } } EXPORT_SYMBOL(i2c_transfer); @@ -1106,7 +1106,7 @@ int i2c_probe(struct i2c_adapter *adapter, dev_warn(&adapter->dev, "SMBus Quick command not supported, " "can't probe for chips\n"); - return -1; + return -EOPNOTSUPP; } /* Probe entries are done second, and are not affected by ignore @@ -1298,7 +1298,7 @@ static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) if (rpec != cpec) { pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n", rpec, cpec); - return -1; + return -EBADMSG; } return 0; } @@ -1313,11 +1313,12 @@ EXPORT_SYMBOL(i2c_smbus_write_quick); s32 i2c_smbus_read_byte(struct i2c_client *client) { union i2c_smbus_data data; - if (i2c_smbus_xfer(client->adapter,client->addr,client->flags, - I2C_SMBUS_READ,0,I2C_SMBUS_BYTE, &data)) - return -1; - else - return data.byte; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, 0, + I2C_SMBUS_BYTE, &data); + return (status < 0) ? status : data.byte; } EXPORT_SYMBOL(i2c_smbus_read_byte); @@ -1331,11 +1332,12 @@ EXPORT_SYMBOL(i2c_smbus_write_byte); s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command) { union i2c_smbus_data data; - if (i2c_smbus_xfer(client->adapter,client->addr,client->flags, - I2C_SMBUS_READ,command, I2C_SMBUS_BYTE_DATA,&data)) - return -1; - else - return data.byte; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BYTE_DATA, &data); + return (status < 0) ? status : data.byte; } EXPORT_SYMBOL(i2c_smbus_read_byte_data); @@ -1352,11 +1354,12 @@ EXPORT_SYMBOL(i2c_smbus_write_byte_data); s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command) { union i2c_smbus_data data; - if (i2c_smbus_xfer(client->adapter,client->addr,client->flags, - I2C_SMBUS_READ,command, I2C_SMBUS_WORD_DATA, &data)) - return -1; - else - return data.word; + int status; + + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_WORD_DATA, &data); + return (status < 0) ? status : data.word; } EXPORT_SYMBOL(i2c_smbus_read_word_data); @@ -1390,11 +1393,13 @@ s32 i2c_smbus_read_block_data(struct i2c_client *client, u8 command, u8 *values) { union i2c_smbus_data data; + int status; - if (i2c_smbus_xfer(client->adapter, client->addr, client->flags, - I2C_SMBUS_READ, command, - I2C_SMBUS_BLOCK_DATA, &data)) - return -1; + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_BLOCK_DATA, &data); + if (status) + return status; memcpy(values, &data.block[1], data.block[0]); return data.block[0]; @@ -1421,14 +1426,16 @@ s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 length, u8 *values) { union i2c_smbus_data data; + int status; if (length > I2C_SMBUS_BLOCK_MAX) length = I2C_SMBUS_BLOCK_MAX; data.block[0] = length; - if (i2c_smbus_xfer(client->adapter,client->addr,client->flags, - I2C_SMBUS_READ,command, - I2C_SMBUS_I2C_BLOCK_DATA,&data)) - return -1; + status = i2c_smbus_xfer(client->adapter, client->addr, client->flags, + I2C_SMBUS_READ, command, + I2C_SMBUS_I2C_BLOCK_DATA, &data); + if (status < 0) + return status; memcpy(values, &data.block[1], data.block[0]); return data.block[0]; @@ -1469,6 +1476,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, }; int i; u8 partial_pec = 0; + int status; msgbuf0[0] = command; switch(size) { @@ -1518,10 +1526,10 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, } else { msg[0].len = data->block[0] + 2; if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) { - dev_err(&adapter->dev, "smbus_access called with " - "invalid block write size (%d)\n", - data->block[0]); - return -1; + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; } for (i = 1; i < msg[0].len; i++) msgbuf0[i] = data->block[i-1]; @@ -1531,10 +1539,10 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, num = 2; /* Another special case */ read_write = I2C_SMBUS_READ; if (data->block[0] > I2C_SMBUS_BLOCK_MAX) { - dev_err(&adapter->dev, "%s called with invalid " - "block proc call size (%d)\n", __func__, + dev_err(&adapter->dev, + "Invalid block write size %d\n", data->block[0]); - return -1; + return -EINVAL; } msg[0].len = data->block[0] + 2; for (i = 1; i < msg[0].len; i++) @@ -1549,19 +1557,18 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, } else { msg[0].len = data->block[0] + 1; if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { - dev_err(&adapter->dev, "i2c_smbus_xfer_emulated called with " - "invalid block write size (%d)\n", - data->block[0]); - return -1; + dev_err(&adapter->dev, + "Invalid block write size %d\n", + data->block[0]); + return -EINVAL; } for (i = 1; i <= data->block[0]; i++) msgbuf0[i] = data->block[i]; } break; default: - dev_err(&adapter->dev, "smbus_access called with invalid size (%d)\n", - size); - return -1; + dev_err(&adapter->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; } i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK @@ -1579,13 +1586,15 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, msg[num-1].len++; } - if (i2c_transfer(adapter, msg, num) < 0) - return -1; + status = i2c_transfer(adapter, msg, num); + if (status < 0) + return status; /* Check PEC if last message is a read */ if (i && (msg[num-1].flags & I2C_M_RD)) { - if (i2c_smbus_check_pec(partial_pec, &msg[num-1]) < 0) - return -1; + status = i2c_smbus_check_pec(partial_pec, &msg[num-1]); + if (status < 0) + return status; } if (read_write == I2C_SMBUS_READ) -- cgit v1.2.3 From f5b728a164b22ec38a5657ebe038def36ffae98b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:23 +0200 Subject: i2c: Group bus drivers by type The list of I2C/SMBus bus drivers is growing and it is sometimes difficult for the users to figure out what drivers they should enable. By grouping the drivers by type, I hope to make the selection easier. Signed-off-by: Jean Delvare --- drivers/i2c/busses/Kconfig | 749 ++++++++++++++++++++++---------------------- drivers/i2c/busses/Makefile | 53 ++-- 2 files changed, 414 insertions(+), 388 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 37f5b84e0e9c..2b0874b0ad11 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -4,6 +4,9 @@ menu "I2C Hardware Bus support" +comment "PC SMBus host controller drivers" + depends on PCI + config I2C_ALI1535 tristate "ALI 1535" depends on PCI @@ -73,93 +76,6 @@ config I2C_AMD8111 This driver can also be built as a module. If so, the module will be called i2c-amd8111. -config I2C_AT91 - tristate "Atmel AT91 I2C Two-Wire interface (TWI)" - depends on ARCH_AT91 && EXPERIMENTAL && BROKEN - help - This supports the use of the I2C interface on Atmel AT91 - processors. - - This driver is BROKEN because the controller which it uses - will easily trigger RX overrun and TX underrun errors. Using - low I2C clock rates may partially work around those issues - on some systems. Another serious problem is that there is no - documented way to issue repeated START conditions, as needed - to support combined I2C messages. Use the i2c-gpio driver - unless your system can cope with those limitations. - -config I2C_AU1550 - tristate "Au1550/Au1200 SMBus interface" - depends on SOC_AU1550 || SOC_AU1200 - help - If you say yes to this option, support will be included for the - Au1550 and Au1200 SMBus interface. - - This driver can also be built as a module. If so, the module - will be called i2c-au1550. - -config I2C_BLACKFIN_TWI - tristate "Blackfin TWI I2C support" - depends on BLACKFIN - depends on !BF561 && !BF531 && !BF532 && !BF533 - help - This is the I2C bus driver for Blackfin on-chip TWI interface. - - This driver can also be built as a module. If so, the module - will be called i2c-bfin-twi. - -config I2C_BLACKFIN_TWI_CLK_KHZ - int "Blackfin TWI I2C clock (kHz)" - depends on I2C_BLACKFIN_TWI - range 10 400 - default 50 - help - The unit of the TWI clock is kHz. - -config I2C_DAVINCI - tristate "DaVinci I2C driver" - depends on ARCH_DAVINCI - help - Support for TI DaVinci I2C controller driver. - - This driver can also be built as a module. If so, the module - will be called i2c-davinci. - - Please note that this driver might be needed to bring up other - devices such as DaVinci NIC. - For details please see http://www.ti.com/davinci - -config I2C_ELEKTOR - tristate "Elektor ISA card" - depends on ISA && BROKEN_ON_SMP - select I2C_ALGOPCF - help - This supports the PCF8584 ISA bus I2C adapter. Say Y if you own - such an adapter. - - This support is also available as a module. If so, the module - will be called i2c-elektor. - -config I2C_GPIO - tristate "GPIO-based bitbanging I2C" - depends on GENERIC_GPIO - select I2C_ALGOBIT - help - This is a very simple bitbanging I2C driver utilizing the - arch-neutral GPIO API to control the SCL and SDA lines. - -config I2C_HYDRA - tristate "CHRP Apple Hydra Mac I/O I2C interface" - depends on PCI && PPC_CHRP && EXPERIMENTAL - select I2C_ALGOBIT - help - This supports the use of the I2C interface in the Apple Hydra Mac - I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you - have such a machine. - - This support is also available as a module. If so, the module - will be called i2c-hydra. - config I2C_I801 tristate "Intel 82801 (ICH)" depends on PCI @@ -185,22 +101,6 @@ config I2C_I801 This driver can also be built as a module. If so, the module will be called i2c-i801. -config I2C_PXA - tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)" - depends on EXPERIMENTAL && ARCH_PXA - help - If you have devices in the PXA I2C bus, say yes to this option. - This driver can also be built as a module. If so, the module - will be called i2c-pxa. - -config I2C_PXA_SLAVE - bool "Intel PXA2XX I2C Slave comms support" - depends on I2C_PXA - help - Support I2C slave mode communications on the PXA I2C bus. This - is necessary for systems where the PXA may be a target on the - I2C bus. - config I2C_PIIX4 tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)" depends on PCI @@ -226,64 +126,6 @@ config I2C_PIIX4 This driver can also be built as a module. If so, the module will be called i2c-piix4. -config I2C_IBM_IIC - tristate "IBM PPC 4xx on-chip I2C interface" - depends on 4xx - help - Say Y here if you want to use IIC peripheral found on - embedded IBM PPC 4xx based systems. - - This driver can also be built as a module. If so, the module - will be called i2c-ibm_iic. - -config I2C_IOP3XX - tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface" - depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX - help - Say Y here if you want to use the IIC bus controller on - the Intel IOPx3xx I/O Processors or IXP4xx Network Processors. - - This driver can also be built as a module. If so, the module - will be called i2c-iop3xx. - -config I2C_IXP2000 - tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)" - depends on ARCH_IXP2000 - select I2C_ALGOBIT - help - Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based - system and are using GPIO lines for an I2C bus. - - This support is also available as a module. If so, the module - will be called i2c-ixp2000. - - This driver is deprecated and will be dropped soon. Use i2c-gpio - instead. - -config I2C_POWERMAC - tristate "Powermac I2C interface" - depends on PPC_PMAC - default y - help - This exposes the various PowerMac i2c interfaces to the linux i2c - layer and to userland. It is used by various drivers on the PowerMac - platform, and should generally be enabled. - - This support is also available as a module. If so, the module - will be called i2c-powermac. - -config I2C_MPC - tristate "MPC107/824x/85xx/52xx/86xx" - depends on PPC32 - help - If you say yes to this option, support will be included for the - built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and - MPC85xx/MPC8641 family processors. The driver may also work on 52xx - family processors, though interrupts are known not to work. - - This driver can also be built as a module. If so, the module - will be called i2c-mpc. - config I2C_NFORCE2 tristate "Nvidia nForce2, nForce3 and nForce4" depends on PCI @@ -307,73 +149,243 @@ config I2C_NFORCE2_S4985 This driver can also be built as a module. If so, the module will be called i2c-nforce2-s4985. -config I2C_OCORES - tristate "OpenCores I2C Controller" - depends on EXPERIMENTAL +config I2C_SIS5595 + tristate "SiS 5595" + depends on PCI help If you say yes to this option, support will be included for the - OpenCores I2C controller. For details see - http://www.opencores.org/projects.cgi/web/i2c/overview + SiS5595 SMBus (a subset of I2C) interface. This driver can also be built as a module. If so, the module - will be called i2c-ocores. + will be called i2c-sis5595. -config I2C_OMAP - tristate "OMAP I2C adapter" - depends on ARCH_OMAP - default y if MACH_OMAP_H3 || MACH_OMAP_OSK +config I2C_SIS630 + tristate "SiS 630/730" + depends on PCI help If you say yes to this option, support will be included for the - I2C interface on the Texas Instruments OMAP1/2 family of processors. - Like OMAP1510/1610/1710/5912 and OMAP242x. - For details see http://www.ti.com/omap. + SiS630 and SiS730 SMBus (a subset of I2C) interface. -config I2C_PARPORT - tristate "Parallel port adapter" - depends on PARPORT + This driver can also be built as a module. If so, the module + will be called i2c-sis630. + +config I2C_SIS96X + tristate "SiS 96x" + depends on PCI + help + If you say yes to this option, support will be included for the SiS + 96x SMBus (a subset of I2C) interfaces. Specifically, the following + chipsets are supported: + 645/961 + 645DX/961 + 645DX/962 + 648/961 + 650/961 + 735 + 745 + + This driver can also be built as a module. If so, the module + will be called i2c-sis96x. + +config I2C_VIA + tristate "VIA VT82C586B" + depends on PCI && EXPERIMENTAL select I2C_ALGOBIT help - This supports parallel port I2C adapters such as the ones made by - Philips or Velleman, Analog Devices evaluation boards, and more. - Basically any adapter using the parallel port as an I2C bus with - no extra chipset is supported by this driver, or could be. + If you say yes to this option, support will be included for the VIA + 82C586B I2C interface - This driver is a replacement for (and was inspired by) an older - driver named i2c-philips-par. The new driver supports more devices, - and makes it easier to add support for new devices. + This driver can also be built as a module. If so, the module + will be called i2c-via. - An adapter type parameter is now mandatory. Please read the file - Documentation/i2c/busses/i2c-parport for details. +config I2C_VIAPRO + tristate "VIA VT82C596/82C686/82xx and CX700" + depends on PCI + help + If you say yes to this option, support will be included for the VIA + VT82C596 and later SMBus interface. Specifically, the following + chipsets are supported: + VT82C596A/B + VT82C686A/B + VT8231 + VT8233/A + VT8235 + VT8237R/A/S + VT8251 + CX700 - Another driver exists, named i2c-parport-light, which doesn't depend - on the parport driver. This is meant for embedded systems. Don't say - Y here if you intend to say Y or M there. + This driver can also be built as a module. If so, the module + will be called i2c-viapro. - This support is also available as a module. If so, the module - will be called i2c-parport. +comment "Mac SMBus host controller drivers" + depends on PPC_CHRP || PPC_PMAC -config I2C_PARPORT_LIGHT - tristate "Parallel port adapter (light)" +config I2C_HYDRA + tristate "CHRP Apple Hydra Mac I/O I2C interface" + depends on PCI && PPC_CHRP && EXPERIMENTAL select I2C_ALGOBIT help - This supports parallel port I2C adapters such as the ones made by - Philips or Velleman, Analog Devices evaluation boards, and more. - Basically any adapter using the parallel port as an I2C bus with - no extra chipset is supported by this driver, or could be. - - This driver is a light version of i2c-parport. It doesn't depend - on the parport driver, and uses direct I/O access instead. This - might be preferred on embedded systems where wasting memory for - the clean but heavy parport handling is not an option. The - drawback is a reduced portability and the impossibility to - daisy-chain other parallel port devices. + This supports the use of the I2C interface in the Apple Hydra Mac + I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you + have such a machine. - Don't say Y here if you said Y or M to i2c-parport. Saying M to - both is possible but both modules should not be loaded at the same - time. + This support is also available as a module. If so, the module + will be called i2c-hydra. + +config I2C_POWERMAC + tristate "Powermac I2C interface" + depends on PPC_PMAC + default y + help + This exposes the various PowerMac i2c interfaces to the linux i2c + layer and to userland. It is used by various drivers on the PowerMac + platform, and should generally be enabled. This support is also available as a module. If so, the module - will be called i2c-parport-light. + will be called i2c-powermac. + +comment "I2C system bus drivers (mostly embedded / system-on-chip)" + +config I2C_AT91 + tristate "Atmel AT91 I2C Two-Wire interface (TWI)" + depends on ARCH_AT91 && EXPERIMENTAL && BROKEN + help + This supports the use of the I2C interface on Atmel AT91 + processors. + + This driver is BROKEN because the controller which it uses + will easily trigger RX overrun and TX underrun errors. Using + low I2C clock rates may partially work around those issues + on some systems. Another serious problem is that there is no + documented way to issue repeated START conditions, as needed + to support combined I2C messages. Use the i2c-gpio driver + unless your system can cope with those limitations. + +config I2C_AU1550 + tristate "Au1550/Au1200 SMBus interface" + depends on SOC_AU1550 || SOC_AU1200 + help + If you say yes to this option, support will be included for the + Au1550 and Au1200 SMBus interface. + + This driver can also be built as a module. If so, the module + will be called i2c-au1550. + +config I2C_BLACKFIN_TWI + tristate "Blackfin TWI I2C support" + depends on BLACKFIN + depends on !BF561 && !BF531 && !BF532 && !BF533 + help + This is the I2C bus driver for Blackfin on-chip TWI interface. + + This driver can also be built as a module. If so, the module + will be called i2c-bfin-twi. + +config I2C_BLACKFIN_TWI_CLK_KHZ + int "Blackfin TWI I2C clock (kHz)" + depends on I2C_BLACKFIN_TWI + range 10 400 + default 50 + help + The unit of the TWI clock is kHz. + +config I2C_DAVINCI + tristate "DaVinci I2C driver" + depends on ARCH_DAVINCI + help + Support for TI DaVinci I2C controller driver. + + This driver can also be built as a module. If so, the module + will be called i2c-davinci. + + Please note that this driver might be needed to bring up other + devices such as DaVinci NIC. + For details please see http://www.ti.com/davinci + +config I2C_GPIO + tristate "GPIO-based bitbanging I2C" + depends on GENERIC_GPIO + select I2C_ALGOBIT + help + This is a very simple bitbanging I2C driver utilizing the + arch-neutral GPIO API to control the SCL and SDA lines. + +config I2C_IBM_IIC + tristate "IBM PPC 4xx on-chip I2C interface" + depends on 4xx + help + Say Y here if you want to use IIC peripheral found on + embedded IBM PPC 4xx based systems. + + This driver can also be built as a module. If so, the module + will be called i2c-ibm_iic. + +config I2C_IOP3XX + tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface" + depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX + help + Say Y here if you want to use the IIC bus controller on + the Intel IOPx3xx I/O Processors or IXP4xx Network Processors. + + This driver can also be built as a module. If so, the module + will be called i2c-iop3xx. + +config I2C_IXP2000 + tristate "IXP2000 GPIO-Based I2C Interface (DEPRECATED)" + depends on ARCH_IXP2000 + select I2C_ALGOBIT + help + Say Y here if you have an Intel IXP2000 (2400, 2800, 2850) based + system and are using GPIO lines for an I2C bus. + + This support is also available as a module. If so, the module + will be called i2c-ixp2000. + + This driver is deprecated and will be dropped soon. Use i2c-gpio + instead. + +config I2C_MPC + tristate "MPC107/824x/85xx/52xx/86xx" + depends on PPC32 + help + If you say yes to this option, support will be included for the + built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and + MPC85xx/MPC8641 family processors. The driver may also work on 52xx + family processors, though interrupts are known not to work. + + This driver can also be built as a module. If so, the module + will be called i2c-mpc. + +config I2C_MV64XXX + tristate "Marvell mv64xxx I2C Controller" + depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + built-in I2C interface on the Marvell 64xxx line of host bridges. + + This driver can also be built as a module. If so, the module + will be called i2c-mv64xxx. + +config I2C_OCORES + tristate "OpenCores I2C Controller" + depends on EXPERIMENTAL + help + If you say yes to this option, support will be included for the + OpenCores I2C controller. For details see + http://www.opencores.org/projects.cgi/web/i2c/overview + + This driver can also be built as a module. If so, the module + will be called i2c-ocores. + +config I2C_OMAP + tristate "OMAP I2C adapter" + depends on ARCH_OMAP + default y if MACH_OMAP_H3 || MACH_OMAP_OSK + help + If you say yes to this option, support will be included for the + I2C interface on the Texas Instruments OMAP1/2 family of processors. + Like OMAP1510/1610/1710/5912 and OMAP242x. + For details see http://www.ti.com/omap. config I2C_PASEMI tristate "PA Semi SMBus interface" @@ -381,6 +393,32 @@ config I2C_PASEMI help Supports the PA Semi PWRficient on-chip SMBus interfaces. +config I2C_PNX + tristate "I2C bus support for Philips PNX targets" + depends on ARCH_PNX4008 + help + This driver supports the Philips IP3204 I2C IP block master and/or + slave controller + + This driver can also be built as a module. If so, the module + will be called i2c-pnx. + +config I2C_PXA + tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)" + depends on EXPERIMENTAL && ARCH_PXA + help + If you have devices in the PXA I2C bus, say yes to this option. + This driver can also be built as a module. If so, the module + will be called i2c-pxa. + +config I2C_PXA_SLAVE + bool "Intel PXA2XX I2C Slave comms support" + depends on I2C_PXA + help + Support I2C slave mode communications on the PXA I2C bus. This + is necessary for systems where the PXA may be a target on the + I2C bus. + config I2C_S3C2410 tristate "S3C2410 I2C Driver" depends on ARCH_S3C2410 @@ -388,11 +426,24 @@ config I2C_S3C2410 Say Y here to include support for I2C controller in the Samsung S3C2410 based System-on-Chip devices. -config I2C_SIBYTE - tristate "SiByte SMBus interface" - depends on SIBYTE_SB1xxx_SOC +config I2C_SH7760 + tristate "Renesas SH7760 I2C Controller" + depends on CPU_SUBTYPE_SH7760 help - Supports the SiByte SOC on-chip I2C interfaces (2 channels). + This driver supports the 2 I2C interfaces on the Renesas SH7760. + + This driver can also be built as a module. If so, the module + will be called i2c-sh7760. + +config I2C_SH_MOBILE + tristate "SuperH Mobile I2C Controller" + depends on SUPERH + help + If you say yes to this option, support will be included for the + built-in I2C interface on the Renesas SH-Mobile processor. + + This driver can also be built as a module. If so, the module + will be called i2c-sh_mobile. config I2C_SIMTEC tristate "Simtec Generic I2C interface" @@ -406,86 +457,65 @@ config I2C_SIMTEC This driver can also be built as a module. If so, the module will be called i2c-simtec. -config SCx200_I2C - tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)" - depends on SCx200_GPIO +config I2C_VERSATILE + tristate "ARM Versatile/Realview I2C bus support" + depends on ARCH_VERSATILE || ARCH_REALVIEW select I2C_ALGOBIT help - Enable the use of two GPIO pins of a SCx200 processor as an I2C bus. - - If you don't know what to do here, say N. + Say yes if you want to support the I2C serial bus on ARMs Versatile + range of platforms. - This support is also available as a module. If so, the module - will be called scx200_i2c. + This driver can also be built as a module. If so, the module + will be called i2c-versatile. - This driver is deprecated and will be dropped soon. Use i2c-gpio - (or scx200_acb) instead. +comment "External I2C/SMBus adapter drivers" -config SCx200_I2C_SCL - int "GPIO pin used for SCL" - depends on SCx200_I2C - default "12" +config I2C_PARPORT + tristate "Parallel port adapter" + depends on PARPORT + select I2C_ALGOBIT help - Enter the GPIO pin number used for the SCL signal. This value can - also be specified with a module parameter. + This supports parallel port I2C adapters such as the ones made by + Philips or Velleman, Analog Devices evaluation boards, and more. + Basically any adapter using the parallel port as an I2C bus with + no extra chipset is supported by this driver, or could be. -config SCx200_I2C_SDA - int "GPIO pin used for SDA" - depends on SCx200_I2C - default "13" - help - Enter the GPIO pin number used for the SSA signal. This value can - also be specified with a module parameter. + This driver is a replacement for (and was inspired by) an older + driver named i2c-philips-par. The new driver supports more devices, + and makes it easier to add support for new devices. -config SCx200_ACB - tristate "Geode ACCESS.bus support" - depends on X86_32 && PCI - help - Enable the use of the ACCESS.bus controllers on the Geode SCx200 and - SC1100 processors and the CS5535 and CS5536 Geode companion devices. + An adapter type parameter is now mandatory. Please read the file + Documentation/i2c/busses/i2c-parport for details. - If you don't know what to do here, say N. + Another driver exists, named i2c-parport-light, which doesn't depend + on the parport driver. This is meant for embedded systems. Don't say + Y here if you intend to say Y or M there. This support is also available as a module. If so, the module - will be called scx200_acb. - -config I2C_SIS5595 - tristate "SiS 5595" - depends on PCI - help - If you say yes to this option, support will be included for the - SiS5595 SMBus (a subset of I2C) interface. - - This driver can also be built as a module. If so, the module - will be called i2c-sis5595. + will be called i2c-parport. -config I2C_SIS630 - tristate "SiS 630/730" - depends on PCI +config I2C_PARPORT_LIGHT + tristate "Parallel port adapter (light)" + select I2C_ALGOBIT help - If you say yes to this option, support will be included for the - SiS630 and SiS730 SMBus (a subset of I2C) interface. + This supports parallel port I2C adapters such as the ones made by + Philips or Velleman, Analog Devices evaluation boards, and more. + Basically any adapter using the parallel port as an I2C bus with + no extra chipset is supported by this driver, or could be. - This driver can also be built as a module. If so, the module - will be called i2c-sis630. + This driver is a light version of i2c-parport. It doesn't depend + on the parport driver, and uses direct I/O access instead. This + might be preferred on embedded systems where wasting memory for + the clean but heavy parport handling is not an option. The + drawback is a reduced portability and the impossibility to + daisy-chain other parallel port devices. -config I2C_SIS96X - tristate "SiS 96x" - depends on PCI - help - If you say yes to this option, support will be included for the SiS - 96x SMBus (a subset of I2C) interfaces. Specifically, the following - chipsets are supported: - 645/961 - 645DX/961 - 645DX/962 - 648/961 - 650/961 - 735 - 745 + Don't say Y here if you said Y or M to i2c-parport. Saying M to + both is possible but both modules should not be loaded at the same + time. - This driver can also be built as a module. If so, the module - will be called i2c-sis96x. + This support is also available as a module. If so, the module + will be called i2c-parport-light. config I2C_TAOS_EVM tristate "TAOS evaluation module" @@ -503,21 +533,8 @@ config I2C_TAOS_EVM This support is also available as a module. If so, the module will be called i2c-taos-evm. -config I2C_STUB - tristate "I2C/SMBus Test Stub" - depends on EXPERIMENTAL && m - default 'n' - help - This module may be useful to developers of SMBus client drivers, - especially for certain kinds of sensor chips. - - If you do build this module, be sure to read the notes and warnings - in . - - If you don't know what to do here, definitely say N. - config I2C_TINY_USB - tristate "I2C-Tiny-USB" + tristate "Tiny-USB adapter" depends on USB help If you say yes to this option, support will be included for the @@ -527,16 +544,21 @@ config I2C_TINY_USB This driver can also be built as a module. If so, the module will be called i2c-tiny-usb. -config I2C_VERSATILE - tristate "ARM Versatile/Realview I2C bus support" - depends on ARCH_VERSATILE || ARCH_REALVIEW +comment "Graphics adapter I2C/DDC channel drivers" + depends on PCI + +config I2C_VOODOO3 + tristate "Voodoo 3" + depends on PCI select I2C_ALGOBIT help - Say yes if you want to support the I2C serial bus on ARMs Versatile - range of platforms. + If you say yes to this option, support will be included for the + Voodoo 3 I2C interface. This driver can also be built as a module. If so, the module - will be called i2c-versatile. + will be called i2c-voodoo3. + +comment "Other I2C/SMBus bus drivers" config I2C_ACORN tristate "Acorn IOC/IOMD I2C bus support" @@ -548,46 +570,16 @@ config I2C_ACORN If you don't know, say Y. -config I2C_VIA - tristate "VIA 82C586B" - depends on PCI && EXPERIMENTAL - select I2C_ALGOBIT - help - If you say yes to this option, support will be included for the VIA - 82C586B I2C interface - - This driver can also be built as a module. If so, the module - will be called i2c-via. - -config I2C_VIAPRO - tristate "VIA VT82C596/82C686/82xx and CX700" - depends on PCI - help - If you say yes to this option, support will be included for the VIA - VT82C596 and later SMBus interface. Specifically, the following - chipsets are supported: - VT82C596A/B - VT82C686A/B - VT8231 - VT8233/A - VT8235 - VT8237R/A/S - VT8251 - CX700 - - This driver can also be built as a module. If so, the module - will be called i2c-viapro. - -config I2C_VOODOO3 - tristate "Voodoo 3" - depends on PCI - select I2C_ALGOBIT +config I2C_ELEKTOR + tristate "Elektor ISA card" + depends on ISA && BROKEN_ON_SMP + select I2C_ALGOPCF help - If you say yes to this option, support will be included for the - Voodoo 3 I2C interface. + This supports the PCF8584 ISA bus I2C adapter. Say Y if you own + such an adapter. - This driver can also be built as a module. If so, the module - will be called i2c-voodoo3. + This support is also available as a module. If so, the module + will be called i2c-elektor. config I2C_PCA_ISA tristate "PCA9564 on an ISA bus" @@ -617,26 +609,6 @@ config I2C_PCA_PLATFORM This driver can also be built as a module. If so, the module will be called i2c-pca-platform. -config I2C_MV64XXX - tristate "Marvell mv64xxx I2C Controller" - depends on (MV64X60 || PLAT_ORION) && EXPERIMENTAL - help - If you say yes to this option, support will be included for the - built-in I2C interface on the Marvell 64xxx line of host bridges. - - This driver can also be built as a module. If so, the module - will be called i2c-mv64xxx. - -config I2C_PNX - tristate "I2C bus support for Philips PNX targets" - depends on ARCH_PNX4008 - help - This driver supports the Philips IP3204 I2C IP block master and/or - slave controller - - This driver can also be built as a module. If so, the module - will be called i2c-pnx. - config I2C_PMCMSP tristate "PMC MSP I2C TWI Controller" depends on PMC_MSP @@ -646,23 +618,66 @@ config I2C_PMCMSP This driver can also be built as module. If so, the module will be called i2c-pmcmsp. -config I2C_SH7760 - tristate "Renesas SH7760 I2C Controller" - depends on CPU_SUBTYPE_SH7760 +config I2C_SIBYTE + tristate "SiByte SMBus interface" + depends on SIBYTE_SB1xxx_SOC help - This driver supports the 2 I2C interfaces on the Renesas SH7760. + Supports the SiByte SOC on-chip I2C interfaces (2 channels). - This driver can also be built as a module. If so, the module - will be called i2c-sh7760. +config I2C_STUB + tristate "I2C/SMBus Test Stub" + depends on EXPERIMENTAL && m + default 'n' + help + This module may be useful to developers of SMBus client drivers, + especially for certain kinds of sensor chips. -config I2C_SH_MOBILE - tristate "SuperH Mobile I2C Controller" - depends on SUPERH + If you do build this module, be sure to read the notes and warnings + in . + + If you don't know what to do here, definitely say N. + +config SCx200_I2C + tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)" + depends on SCx200_GPIO + select I2C_ALGOBIT help - If you say yes to this option, support will be included for the - built-in I2C interface on the Renesas SH-Mobile processor. + Enable the use of two GPIO pins of a SCx200 processor as an I2C bus. - This driver can also be built as a module. If so, the module - will be called i2c-sh_mobile. + If you don't know what to do here, say N. + + This support is also available as a module. If so, the module + will be called scx200_i2c. + + This driver is deprecated and will be dropped soon. Use i2c-gpio + (or scx200_acb) instead. + +config SCx200_I2C_SCL + int "GPIO pin used for SCL" + depends on SCx200_I2C + default "12" + help + Enter the GPIO pin number used for the SCL signal. This value can + also be specified with a module parameter. + +config SCx200_I2C_SDA + int "GPIO pin used for SDA" + depends on SCx200_I2C + default "13" + help + Enter the GPIO pin number used for the SSA signal. This value can + also be specified with a module parameter. + +config SCx200_ACB + tristate "Geode ACCESS.bus support" + depends on X86_32 && PCI + help + Enable the use of the ACCESS.bus controllers on the Geode SCx200 and + SC1100 processors and the CS5535 and CS5536 Geode companion devices. + + If you don't know what to do here, say N. + + This support is also available as a module. If so, the module + will be called scx200_acb. endmenu diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 81bb407d24cc..48a6a5bddc5e 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -2,55 +2,66 @@ # Makefile for the i2c bus drivers. # +# PC SMBus host controller drivers obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o obj-$(CONFIG_I2C_ALI1563) += i2c-ali1563.o obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o +obj-$(CONFIG_I2C_I801) += i2c-i801.o +obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o +obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o +obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o +obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o +obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o +obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o +obj-$(CONFIG_I2C_VIA) += i2c-via.o +obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o + +# Mac SMBus host controller drivers +obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o +obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o + +# Embebbed system I2C/SMBus host controller drivers obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o -obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o -obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o -obj-$(CONFIG_I2C_I801) += i2c-i801.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o -obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o -obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o -obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o obj-$(CONFIG_I2C_OMAP) += i2c-omap.o -obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o -obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o -obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o -obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o -obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o -obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o -obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o -obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o -obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o -obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o -obj-$(CONFIG_I2C_STUB) += i2c-stub.o +obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o + +# External I2C/SMBus adapter drivers +obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o +obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o -obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o -obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o -obj-$(CONFIG_I2C_VIA) += i2c-via.o -obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o + +# Graphics adapter I2C/DDC channel drivers obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o + +# Other I2C/SMBus bus drivers +obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o +obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o +obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o +obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pca-platform.o +obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o +obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o +obj-$(CONFIG_I2C_STUB) += i2c-stub.o obj-$(CONFIG_SCx200_ACB) += scx200_acb.o obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o -- cgit v1.2.3 From 67c2e66571c383404a5acd08189194da660da942 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:23 +0200 Subject: i2c: Delete unused function i2c_smbus_write_quick Function i2c_smbus_write_quick has no users left, so we can delete it. Also update the list of these helper functions which are gone but could be added back if needed. Signed-off-by: Jean Delvare --- Documentation/i2c/smbus-protocol | 4 ++-- Documentation/i2c/writing-clients | 14 +++++++------- drivers/i2c/i2c-core.c | 7 ------- include/linux/i2c.h | 1 - 4 files changed, 9 insertions(+), 17 deletions(-) diff --git a/Documentation/i2c/smbus-protocol b/Documentation/i2c/smbus-protocol index 03f08fb491cc..24bfb65da17d 100644 --- a/Documentation/i2c/smbus-protocol +++ b/Documentation/i2c/smbus-protocol @@ -42,8 +42,8 @@ Count (8 bits): A data byte containing the length of a block operation. [..]: Data sent by I2C device, as opposed to data sent by the host adapter. -SMBus Quick Command: i2c_smbus_write_quick() -============================================= +SMBus Quick Command +=================== This sends a single bit to the device, at the place of the Rd/Wr bit. diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index ba5d1971f35f..63722d3c9cdf 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -569,7 +569,6 @@ SMBus communication in terms of it. Never use this function directly! - extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value); extern s32 i2c_smbus_read_byte(struct i2c_client * client); extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value); extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command); @@ -578,20 +577,21 @@ SMBus communication extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command); extern s32 i2c_smbus_write_word_data(struct i2c_client * client, u8 command, u16 value); + extern s32 i2c_smbus_read_block_data(struct i2c_client * client, + u8 command, u8 *values); extern s32 i2c_smbus_write_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); - -These ones were removed in Linux 2.6.10 because they had no users, but could -be added back later if needed: - - extern s32 i2c_smbus_read_block_data(struct i2c_client * client, - u8 command, u8 *values); extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, u8 command, u8 length, u8 *values); + +These ones were removed from i2c-core because they had no users, but could +be added back later if needed: + + extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value); extern s32 i2c_smbus_process_call(struct i2c_client * client, u8 command, u16 value); extern s32 i2c_smbus_block_process_call(struct i2c_client *client, diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 937f1dcbf3d7..3695a4a1ab77 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1303,13 +1303,6 @@ static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) return 0; } -s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value) -{ - return i2c_smbus_xfer(client->adapter,client->addr,client->flags, - value,0,I2C_SMBUS_QUICK,NULL); -} -EXPORT_SYMBOL(i2c_smbus_write_quick); - s32 i2c_smbus_read_byte(struct i2c_client *client) { union i2c_smbus_data data; diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 8dc730132192..b3695f353f79 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -71,7 +71,6 @@ extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, /* Now follow the 'nice' access routines. These also document the calling conventions of smbus_access. */ -extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value); extern s32 i2c_smbus_read_byte(struct i2c_client * client); extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value); extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command); -- cgit v1.2.3 From ae7193f7fa3e1735ab70807eb6e35a2a6575623f Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:24 +0200 Subject: i2c: Update stray references to smbus_access That function is actually named i2c_smbus_xfer. Signed-off-by: Jean Delvare --- include/linux/i2c.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/i2c.h b/include/linux/i2c.h index b3695f353f79..7c36d5188d39 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -69,7 +69,7 @@ extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, union i2c_smbus_data * data); /* Now follow the 'nice' access routines. These also document the calling - conventions of smbus_access. */ + conventions of i2c_smbus_xfer. */ extern s32 i2c_smbus_read_byte(struct i2c_client * client); extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value); @@ -536,7 +536,7 @@ union i2c_smbus_data { /* and one more for user-space compatibility */ }; -/* smbus_access read or write markers */ +/* i2c_smbus_xfer read or write markers */ #define I2C_SMBUS_READ 1 #define I2C_SMBUS_WRITE 0 -- cgit v1.2.3 From a1cdedac634eef81f747078bf1c27ad36ab13553 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 14 Jul 2008 22:38:24 +0200 Subject: i2c: Kerneldoc for most I/O calls Provide kerneldoc for most of the I2C and SMBus I/O calls. Add a comment summarizing some fault reporting issues which affect the ability to provide clean fault reports through I2C master transfer calls. (Making it hard to precisely specify their return values...) Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 133 +++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 124 insertions(+), 9 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 3695a4a1ab77..527d51319f3c 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -945,10 +945,39 @@ module_exit(i2c_exit); * ---------------------------------------------------- */ +/** + * i2c_transfer - execute a single or combined I2C message + * @adap: Handle to I2C bus + * @msgs: One or more messages to execute before STOP is issued to + * terminate the operation; each message begins with a START. + * @num: Number of messages to be executed. + * + * Returns negative errno, else the number of messages executed. + * + * Note that there is no requirement that each message be sent to + * the same slave address, although that is the most common model. + */ int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num) { int ret; + /* REVISIT the fault reporting model here is weak: + * + * - When we get an error after receiving N bytes from a slave, + * there is no way to report "N". + * + * - When we get a NAK after transmitting N bytes to a slave, + * there is no way to report "N" ... or to let the master + * continue executing the rest of this combined message, if + * that's the appropriate response. + * + * - When for example "num" is two and we successfully complete + * the first message but get an error part way through the + * second, it's unclear whether that should be reported as + * one (discarding status on the second message) or errno + * (discarding status on the first one). + */ + if (adap->algo->master_xfer) { #ifdef DEBUG for (ret = 0; ret < num; ret++) { @@ -979,6 +1008,14 @@ int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg *msgs, int num) } EXPORT_SYMBOL(i2c_transfer); +/** + * i2c_master_send - issue a single I2C message in master transmit mode + * @client: Handle to slave device + * @buf: Data that will be written to the slave + * @count: How many bytes to write + * + * Returns negative errno, or else the number of bytes written. + */ int i2c_master_send(struct i2c_client *client,const char *buf ,int count) { int ret; @@ -998,6 +1035,14 @@ int i2c_master_send(struct i2c_client *client,const char *buf ,int count) } EXPORT_SYMBOL(i2c_master_send); +/** + * i2c_master_recv - issue a single I2C message in master receive mode + * @client: Handle to slave device + * @buf: Where to store data read from slave + * @count: How many bytes to read + * + * Returns negative errno, or else the number of bytes read. + */ int i2c_master_recv(struct i2c_client *client, char *buf ,int count) { struct i2c_adapter *adap=client->adapter; @@ -1303,6 +1348,13 @@ static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg) return 0; } +/** + * i2c_smbus_read_byte - SMBus "receive byte" protocol + * @client: Handle to slave device + * + * This executes the SMBus "receive byte" protocol, returning negative errno + * else the byte received from the device. + */ s32 i2c_smbus_read_byte(struct i2c_client *client) { union i2c_smbus_data data; @@ -1315,6 +1367,14 @@ s32 i2c_smbus_read_byte(struct i2c_client *client) } EXPORT_SYMBOL(i2c_smbus_read_byte); +/** + * i2c_smbus_write_byte - SMBus "send byte" protocol + * @client: Handle to slave device + * @value: Byte to be sent + * + * This executes the SMBus "send byte" protocol, returning negative errno + * else zero on success. + */ s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value) { return i2c_smbus_xfer(client->adapter,client->addr,client->flags, @@ -1322,6 +1382,14 @@ s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value) } EXPORT_SYMBOL(i2c_smbus_write_byte); +/** + * i2c_smbus_read_byte_data - SMBus "read byte" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * + * This executes the SMBus "read byte" protocol, returning negative errno + * else a data byte received from the device. + */ s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command) { union i2c_smbus_data data; @@ -1334,6 +1402,15 @@ s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command) } EXPORT_SYMBOL(i2c_smbus_read_byte_data); +/** + * i2c_smbus_write_byte_data - SMBus "write byte" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @value: Byte being written + * + * This executes the SMBus "write byte" protocol, returning negative errno + * else zero on success. + */ s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value) { union i2c_smbus_data data; @@ -1344,6 +1421,14 @@ s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value) } EXPORT_SYMBOL(i2c_smbus_write_byte_data); +/** + * i2c_smbus_read_word_data - SMBus "read word" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * + * This executes the SMBus "read word" protocol, returning negative errno + * else a 16-bit unsigned "word" received from the device. + */ s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command) { union i2c_smbus_data data; @@ -1356,6 +1441,15 @@ s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command) } EXPORT_SYMBOL(i2c_smbus_read_word_data); +/** + * i2c_smbus_write_word_data - SMBus "write word" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @value: 16-bit "word" being written + * + * This executes the SMBus "write word" protocol, returning negative errno + * else zero on success. + */ s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value) { union i2c_smbus_data data; @@ -1367,15 +1461,14 @@ s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value) EXPORT_SYMBOL(i2c_smbus_write_word_data); /** - * i2c_smbus_read_block_data - SMBus block read request + * i2c_smbus_read_block_data - SMBus "block read" protocol * @client: Handle to slave device - * @command: Command byte issued to let the slave know what data should - * be returned + * @command: Byte interpreted by slave * @values: Byte array into which data will be read; big enough to hold * the data returned by the slave. SMBus allows at most 32 bytes. * - * Returns the number of bytes read in the slave's response, else a - * negative number to indicate some kind of error. + * This executes the SMBus "block read" protocol, returning negative errno + * else the number of data bytes in the slave's response. * * Note that using this function requires that the client's adapter support * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality. Not all adapter drivers @@ -1399,6 +1492,16 @@ s32 i2c_smbus_read_block_data(struct i2c_client *client, u8 command, } EXPORT_SYMBOL(i2c_smbus_read_block_data); +/** + * i2c_smbus_write_block_data - SMBus "block write" protocol + * @client: Handle to slave device + * @command: Byte interpreted by slave + * @length: Size of data block; SMBus allows at most 32 bytes + * @values: Byte array which will be written. + * + * This executes the SMBus "block write" protocol, returning negative errno + * else zero on success. + */ s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command, u8 length, const u8 *values) { @@ -1615,9 +1718,21 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr, return 0; } - +/** + * i2c_smbus_xfer - execute SMBus protocol operations + * @adapter: Handle to I2C bus + * @addr: Address of SMBus slave on that bus + * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC) + * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE + * @command: Byte interpreted by slave, for protocols which use such bytes + * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL + * @data: Data to be read or written + * + * This executes an SMBus protocol operation, and returns a negative + * errno code else zero on success. + */ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags, - char read_write, u8 command, int size, + char read_write, u8 command, int protocol, union i2c_smbus_data * data) { s32 res; @@ -1627,11 +1742,11 @@ s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags, if (adapter->algo->smbus_xfer) { mutex_lock(&adapter->bus_lock); res = adapter->algo->smbus_xfer(adapter,addr,flags,read_write, - command,size,data); + command, protocol, data); mutex_unlock(&adapter->bus_lock); } else res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write, - command,size,data); + command, protocol, data); return res; } -- cgit v1.2.3 From 6ea438ec8da4ec56bf415f5ea360e6b0cb59c6c3 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 14 Jul 2008 22:38:24 +0200 Subject: i2c: i2c_use_client() defends against NULL Defend the i2c refcount calls against NULL pointers, as is important (and conventional) for such calls. Note that none of the current callers of i2c_use_client() use its return value. [JD: I hate this but apparently all the other subsystems do it so...] Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 527d51319f3c..b995502400b8 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -866,8 +866,9 @@ EXPORT_SYMBOL(i2c_detach_client); */ struct i2c_client *i2c_use_client(struct i2c_client *client) { - get_device(&client->dev); - return client; + if (client && get_device(&client->dev)) + return client; + return NULL; } EXPORT_SYMBOL(i2c_use_client); @@ -879,7 +880,8 @@ EXPORT_SYMBOL(i2c_use_client); */ void i2c_release_client(struct i2c_client *client) { - put_device(&client->dev); + if (client) + put_device(&client->dev); } EXPORT_SYMBOL(i2c_release_client); -- cgit v1.2.3 From 97140342e69d479a3ad82bfd4c154c0b08fe3eea Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 14 Jul 2008 22:38:25 +0200 Subject: i2c: Bus drivers return -Errno not -1 Tighten error paths used by various i2c adapters (mostly x86) so they return real fault/errno codes instead of a "-1" (which is most often interpreted as "-EPERM"). Build tested, with eyeball review. One minor initial goal is to have adapters consistently return the code "-ENXIO" when addressing a device doesn't get an ACK response, at least in the probe paths where they are already good at stifling related logspam. Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- drivers/i2c/algos/i2c-algo-bit.c | 4 +-- drivers/i2c/busses/i2c-ali1535.c | 22 ++++++++-------- drivers/i2c/busses/i2c-ali1563.c | 23 ++++++++++++----- drivers/i2c/busses/i2c-ali15x3.c | 19 +++++++------- drivers/i2c/busses/i2c-amd756-s4882.c | 4 +-- drivers/i2c/busses/i2c-amd756.c | 18 ++++++++------ drivers/i2c/busses/i2c-amd8111.c | 47 +++++++++++++++++++++++------------ drivers/i2c/busses/i2c-i801.c | 44 ++++++++++++++++---------------- drivers/i2c/busses/i2c-nforce2.c | 25 ++++++++++--------- drivers/i2c/busses/i2c-piix4.c | 20 ++++++++------- drivers/i2c/busses/i2c-sis5595.c | 19 ++++++++------ drivers/i2c/busses/i2c-sis630.c | 47 +++++++++++++++++++---------------- drivers/i2c/busses/i2c-sis96x.c | 23 +++++++++-------- drivers/i2c/busses/i2c-stub.c | 4 +-- drivers/i2c/busses/i2c-viapro.c | 20 ++++++++------- 15 files changed, 191 insertions(+), 148 deletions(-) diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 35812823787b..eb8f72ca02f4 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -320,7 +320,7 @@ static int try_address(struct i2c_adapter *i2c_adap, unsigned char addr, int retries) { struct i2c_algo_bit_data *adap = i2c_adap->algo_data; - int i, ret = -1; + int i, ret = 0; for (i = 0; i <= retries; i++) { ret = i2c_outb(i2c_adap, addr); @@ -508,7 +508,7 @@ static int bit_doAddress(struct i2c_adapter *i2c_adap, struct i2c_msg *msg) addr ^= 1; ret = try_address(i2c_adap, addr, retries); if ((ret != 1) && !nak_ok) - return -EREMOTEIO; + return -ENXIO; } return 0; diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index f14372ac2fc5..c21e4d96382e 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -259,7 +259,7 @@ static int ali1535_transaction(struct i2c_adapter *adap) dev_err(&adap->dev, "SMBus reset failed! (0x%02x) - controller or " "device on bus is probably hung\n", temp); - return -1; + return -EBUSY; } } else { /* check and clear done bit */ @@ -281,12 +281,12 @@ static int ali1535_transaction(struct i2c_adapter *adap) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { - result = -1; + result = -ETIMEDOUT; dev_err(&adap->dev, "SMBus Timeout!\n"); } if (temp & ALI1535_STS_FAIL) { - result = -1; + result = -EIO; dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); } @@ -295,7 +295,7 @@ static int ali1535_transaction(struct i2c_adapter *adap) * do a printk. This means that bus collisions go unreported. */ if (temp & ALI1535_STS_BUSERR) { - result = -1; + result = -ENXIO; dev_dbg(&adap->dev, "Error: no response or bus collision ADD=%02x\n", inb_p(SMBHSTADD)); @@ -303,13 +303,13 @@ static int ali1535_transaction(struct i2c_adapter *adap) /* haven't ever seen this */ if (temp & ALI1535_STS_DEV) { - result = -1; + result = -EIO; dev_err(&adap->dev, "Error: device error\n"); } /* check to see if the "command complete" indication is set */ if (!(temp & ALI1535_STS_DONE)) { - result = -1; + result = -ETIMEDOUT; dev_err(&adap->dev, "Error: command never completed\n"); } @@ -332,7 +332,7 @@ static int ali1535_transaction(struct i2c_adapter *adap) return result; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data) @@ -359,7 +359,7 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr, switch (size) { case I2C_SMBUS_PROC_CALL: dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); - result = -1; + result = -EOPNOTSUPP; goto EXIT; case I2C_SMBUS_QUICK: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), @@ -420,11 +420,9 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr, break; } - if (ali1535_transaction(adap)) { - /* Error in transaction */ - result = -1; + result = ali1535_transaction(adap); + if (result) goto EXIT; - } if ((read_write == I2C_SMBUS_WRITE) || (size == ALI1535_QUICK)) { result = 0; diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 6b68074e518a..30bd3ee70386 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -67,6 +67,7 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) { u32 data; int timeout; + int status = -EIO; dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, " "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", @@ -103,13 +104,15 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) /* Issue 'kill' to host controller */ outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2); data = inb_p(SMB_HST_STS); + status = -ETIMEDOUT; } /* device error - no response, ignore the autodetection case */ - if ((data & HST_STS_DEVERR) && (size != HST_CNTL2_QUICK)) { - dev_err(&a->dev, "Device error!\n"); + if (data & HST_STS_DEVERR) { + if (size != HST_CNTL2_QUICK) + dev_err(&a->dev, "Device error!\n"); + status = -ENXIO; } - /* bus collision */ if (data & HST_STS_BUSERR) { dev_err(&a->dev, "Bus collision!\n"); @@ -122,13 +125,14 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) outb_p(0x0,SMB_HST_CNTL2); } - return -1; + return status; } static int ali1563_block_start(struct i2c_adapter * a) { u32 data; int timeout; + int status = -EIO; dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, " "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", @@ -164,13 +168,20 @@ static int ali1563_block_start(struct i2c_adapter * a) if (timeout && !(data & HST_STS_BAD)) return 0; + + if (timeout == 0) + status = -ETIMEDOUT; + + if (data & HST_STS_DEVERR) + status = -ENXIO; + dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n", - timeout ? "Timeout " : "", + timeout ? "" : "Timeout ", data & HST_STS_FAIL ? "Transaction Failed " : "", data & HST_STS_BUSERR ? "No response or Bus Collision " : "", data & HST_STS_DEVERR ? "Device Error " : "", !(data & HST_STS_DONE) ? "Transaction Never Finished " : ""); - return -1; + return status; } static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 rw) diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 93bf87d70961..3d752561dc37 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -282,7 +282,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap) dev_err(&adap->dev, "SMBus reset failed! (0x%02x) - " "controller or device on bus is probably hung\n", temp); - return -1; + return -EBUSY; } } else { /* check and clear done bit */ @@ -304,12 +304,12 @@ static int ali15x3_transaction(struct i2c_adapter *adap) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { - result = -1; + result = -ETIMEDOUT; dev_err(&adap->dev, "SMBus Timeout!\n"); } if (temp & ALI15X3_STS_TERM) { - result = -1; + result = -EIO; dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); } @@ -320,7 +320,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap) This means that bus collisions go unreported. */ if (temp & ALI15X3_STS_COLL) { - result = -1; + result = -ENXIO; dev_dbg(&adap->dev, "Error: no response or bus collision ADD=%02x\n", inb_p(SMBHSTADD)); @@ -328,7 +328,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap) /* haven't ever seen this */ if (temp & ALI15X3_STS_DEV) { - result = -1; + result = -EIO; dev_err(&adap->dev, "Error: device error\n"); } dev_dbg(&adap->dev, "Transaction (post): STS=%02x, CNT=%02x, CMD=%02x, " @@ -338,7 +338,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap) return result; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) @@ -364,7 +364,7 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr, switch (size) { case I2C_SMBUS_PROC_CALL: dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); - return -1; + return -EOPNOTSUPP; case I2C_SMBUS_QUICK: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); @@ -421,8 +421,9 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr, outb_p(size, SMBHSTCNT); /* output command */ - if (ali15x3_transaction(adap)) /* Error in transaction */ - return -1; + temp = ali15x3_transaction(adap); + if (temp) + return temp; if ((read_write == I2C_SMBUS_WRITE) || (size == ALI15X3_QUICK)) return 0; diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c index c38a0a112208..2f150e33c74c 100644 --- a/drivers/i2c/busses/i2c-amd756-s4882.c +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -58,7 +58,7 @@ static s32 amd756_access_virt0(struct i2c_adapter * adap, u16 addr, /* We exclude the multiplexed addresses */ if (addr == 0x4c || (addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30 || addr == 0x18) - return -1; + return -ENXIO; mutex_lock(&amd756_lock); @@ -86,7 +86,7 @@ static inline s32 amd756_access_channel(struct i2c_adapter * adap, u16 addr, /* We exclude the non-multiplexed addresses */ if (addr != 0x4c && (addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30) - return -1; + return -ENXIO; mutex_lock(&amd756_lock); diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 43508d61eb7c..3d5bcb65e9e0 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -151,17 +151,17 @@ static int amd756_transaction(struct i2c_adapter *adap) } if (temp & GS_PRERR_STS) { - result = -1; + result = -ENXIO; dev_dbg(&adap->dev, "SMBus Protocol error (no response)!\n"); } if (temp & GS_COL_STS) { - result = -1; + result = -EIO; dev_warn(&adap->dev, "SMBus collision!\n"); } if (temp & GS_TO_STS) { - result = -1; + result = -ETIMEDOUT; dev_dbg(&adap->dev, "SMBus protocol timeout!\n"); } @@ -189,22 +189,23 @@ static int amd756_transaction(struct i2c_adapter *adap) outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE); msleep(100); outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS); - return -1; + return -EIO; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 amd756_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { int i, len; + int status; /** TODO: Should I supporte the 10-bit transfers? */ switch (size) { case I2C_SMBUS_PROC_CALL: dev_dbg(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); /* TODO: Well... It is supported, I'm just not sure what to do here... */ - return -1; + return -EOPNOTSUPP; case I2C_SMBUS_QUICK: outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMB_HOST_ADDRESS); @@ -256,8 +257,9 @@ static s32 amd756_access(struct i2c_adapter * adap, u16 addr, /* How about enabling interrupts... */ outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE); - if (amd756_transaction(adap)) /* Error in transaction */ - return -1; + status = amd756_transaction(adap); + if (status) + return status; if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK)) return 0; diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 5d1a27ef2504..a4f687915de1 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -77,7 +77,7 @@ static unsigned int amd_ec_wait_write(struct amd_smbus *smbus) if (!timeout) { dev_warn(&smbus->dev->dev, "Timeout while waiting for IBF to clear\n"); - return -1; + return -ETIMEDOUT; } return 0; @@ -93,7 +93,7 @@ static unsigned int amd_ec_wait_read(struct amd_smbus *smbus) if (!timeout) { dev_warn(&smbus->dev->dev, "Timeout while waiting for OBF to set\n"); - return -1; + return -ETIMEDOUT; } return 0; @@ -102,16 +102,21 @@ static unsigned int amd_ec_wait_read(struct amd_smbus *smbus) static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, unsigned char *data) { - if (amd_ec_wait_write(smbus)) - return -1; + int status; + + status = amd_ec_wait_write(smbus); + if (status) + return status; outb(AMD_EC_CMD_RD, smbus->base + AMD_EC_CMD); - if (amd_ec_wait_write(smbus)) - return -1; + status = amd_ec_wait_write(smbus); + if (status) + return status; outb(address, smbus->base + AMD_EC_DATA); - if (amd_ec_wait_read(smbus)) - return -1; + status = amd_ec_wait_read(smbus); + if (status) + return status; *data = inb(smbus->base + AMD_EC_DATA); return 0; @@ -120,16 +125,21 @@ static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, unsigned char data) { - if (amd_ec_wait_write(smbus)) - return -1; + int status; + + status = amd_ec_wait_write(smbus); + if (status) + return status; outb(AMD_EC_CMD_WR, smbus->base + AMD_EC_CMD); - if (amd_ec_wait_write(smbus)) - return -1; + status = amd_ec_wait_write(smbus); + if (status) + return status; outb(address, smbus->base + AMD_EC_DATA); - if (amd_ec_wait_write(smbus)) - return -1; + status = amd_ec_wait_write(smbus); + if (status) + return status; outb(data, smbus->base + AMD_EC_DATA); return 0; @@ -267,12 +277,17 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, default: dev_warn(&adap->dev, "Unsupported transaction %d\n", size); - return -1; + return -EOPNOTSUPP; } amd_ec_write(smbus, AMD_SMB_ADDR, addr << 1); amd_ec_write(smbus, AMD_SMB_PRTCL, protocol); + /* FIXME this discards status from ec_read(); so temp[0] will + * hold stack garbage ... the rest of this routine will act + * nonsensically. Ignored ec_write() status might explain + * some such failures... + */ amd_ec_read(smbus, AMD_SMB_STS, temp + 0); if (~temp[0] & AMD_SMB_STS_DONE) { @@ -286,7 +301,7 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, } if ((~temp[0] & AMD_SMB_STS_DONE) || (temp[0] & AMD_SMB_STS_STATUS)) - return -1; + return -EIO; if (read_write == I2C_SMBUS_WRITE) return 0; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index b0f771fe4326..7d6d9dfcc58a 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -151,7 +151,7 @@ static int i801_transaction(int xact) outb_p(temp, SMBHSTSTS); if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp); - return -1; + return -EBUSY; } else { dev_dbg(&I801_dev->dev, "Successful!\n"); } @@ -170,7 +170,7 @@ static int i801_transaction(int xact) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { dev_dbg(&I801_dev->dev, "SMBus Timeout!\n"); - result = -1; + result = -ETIMEDOUT; /* try to stop the current command */ dev_dbg(&I801_dev->dev, "Terminating the current operation\n"); outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT); @@ -179,19 +179,19 @@ static int i801_transaction(int xact) } if (temp & SMBHSTSTS_FAILED) { - result = -1; + result = -EIO; dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n"); } if (temp & SMBHSTSTS_BUS_ERR) { - result = -1; + result = -EIO; dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked " "until next hard reset. (sorry!)\n"); /* Clock stops and slave is stuck in mid-transmission */ } if (temp & SMBHSTSTS_DEV_ERR) { - result = -1; + result = -ENXIO; dev_dbg(&I801_dev->dev, "Error: no response!\n"); } @@ -231,6 +231,7 @@ static int i801_block_transaction_by_block(union i2c_smbus_data *data, char read_write, int hwpec) { int i, len; + int status; inb_p(SMBHSTCNT); /* reset the data buffer index */ @@ -242,14 +243,15 @@ static int i801_block_transaction_by_block(union i2c_smbus_data *data, outb_p(data->block[i+1], SMBBLKDAT); } - if (i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 | - I801_PEC_EN * hwpec)) - return -1; + status = i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 | + I801_PEC_EN * hwpec); + if (status) + return status; if (read_write == I2C_SMBUS_READ) { len = inb_p(SMBHSTDAT0); if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) - return -1; + return -EPROTO; data->block[0] = len; for (i = 0; i < len; i++) @@ -314,11 +316,11 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) { dev_err(&I801_dev->dev, "Reset failed! (%02x)\n", temp); - return -1; + return -EBUSY; } if (i != 1) /* if die in middle of block transaction, fail */ - return -1; + return -EIO; } if (i == 1) @@ -342,19 +344,19 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, msleep(1); outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT); - result = -1; + result = -ETIMEDOUT; dev_dbg(&I801_dev->dev, "SMBus Timeout!\n"); } if (temp & SMBHSTSTS_FAILED) { - result = -1; + result = -EIO; dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n"); } else if (temp & SMBHSTSTS_BUS_ERR) { - result = -1; + result = -EIO; dev_err(&I801_dev->dev, "Bus collision!\n"); } else if (temp & SMBHSTSTS_DEV_ERR) { - result = -1; + result = -ENXIO; dev_dbg(&I801_dev->dev, "Error: no response!\n"); } @@ -362,7 +364,7 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, && command != I2C_SMBUS_I2C_BLOCK_DATA) { len = inb_p(SMBHSTDAT0); if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) - return -1; + return -EPROTO; data->block[0] = len; } @@ -394,7 +396,7 @@ static int i801_set_block_buffer_mode(void) { outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL); if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0) - return -1; + return -EIO; return 0; } @@ -414,7 +416,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, } else if (!(i801_features & FEATURE_I2C_BLOCK_READ)) { dev_err(&I801_dev->dev, "I2C block read is unsupported!\n"); - return -1; + return -EOPNOTSUPP; } } @@ -449,7 +451,7 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write, return result; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 i801_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) @@ -514,7 +516,7 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, case I2C_SMBUS_PROC_CALL: default: dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size); - return -1; + return -EOPNOTSUPP; } if (hwpec) /* enable/disable hardware PEC */ @@ -537,7 +539,7 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, if(block) return ret; if(ret) - return -1; + return ret; if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) return 0; diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index f95efff9b3d1..081fdf3393f4 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -172,16 +172,16 @@ static int nforce2_check_status(struct i2c_adapter *adap) dev_dbg(&adap->dev, "SMBus Timeout!\n"); if (smbus->can_abort) nforce2_abort(adap); - return -1; + return -ETIMEDOUT; } if (!(temp & NVIDIA_SMB_STS_DONE) || (temp & NVIDIA_SMB_STS_STATUS)) { dev_dbg(&adap->dev, "Transaction failed (0x%02x)!\n", temp); - return -1; + return -EIO; } return 0; } -/* Return -1 on error */ +/* Return negative errno on error */ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) @@ -189,7 +189,7 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, struct nforce2_smbus *smbus = adap->algo_data; unsigned char protocol, pec; u8 len; - int i; + int i, status; protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ : NVIDIA_SMB_PRTCL_WRITE; @@ -233,7 +233,7 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, "Transaction failed " "(requested block size: %d)\n", len); - return -1; + return -EINVAL; } outb_p(len, NVIDIA_SMB_BCNT); for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++) @@ -245,14 +245,15 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, default: dev_err(&adap->dev, "Unsupported transaction %d\n", size); - return -1; + return -EOPNOTSUPP; } outb_p((addr & 0x7f) << 1, NVIDIA_SMB_ADDR); outb_p(protocol, NVIDIA_SMB_PRTCL); - if (nforce2_check_status(adap)) - return -1; + status = nforce2_check_status(adap); + if (status) + return status; if (read_write == I2C_SMBUS_WRITE) return 0; @@ -274,7 +275,7 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, dev_err(&adap->dev, "Transaction failed " "(received block size: 0x%02x)\n", len); - return -1; + return -EPROTO; } for (i = 0; i < len; i++) data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i); @@ -335,7 +336,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, != PCIBIOS_SUCCESSFUL) { dev_err(&dev->dev, "Error reading PCI config for %s\n", name); - return -1; + return -EIO; } smbus->base = iobase & PCI_BASE_ADDRESS_IO_MASK; @@ -345,7 +346,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) { dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n", smbus->base, smbus->base+smbus->size-1, name); - return -1; + return -EBUSY; } smbus->adapter.owner = THIS_MODULE; smbus->adapter.id = I2C_HW_SMBUS_NFORCE2; @@ -360,7 +361,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, if (error) { dev_err(&smbus->adapter.dev, "Failed to register adapter.\n"); release_region(smbus->base, smbus->size); - return -1; + return error; } dev_info(&smbus->adapter.dev, "nForce2 SMBus adapter at %#x\n", smbus->base); return 0; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index ac9165968587..dc76c0e2dc65 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -253,7 +253,7 @@ static int piix4_transaction(void) outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) != 0x00) { dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp); - return -1; + return -EBUSY; } else { dev_dbg(&piix4_adapter.dev, "Successful!\n"); } @@ -275,23 +275,23 @@ static int piix4_transaction(void) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { dev_err(&piix4_adapter.dev, "SMBus Timeout!\n"); - result = -1; + result = -ETIMEDOUT; } if (temp & 0x10) { - result = -1; + result = -EIO; dev_err(&piix4_adapter.dev, "Error: Failed bus transaction\n"); } if (temp & 0x08) { - result = -1; + result = -EIO; dev_dbg(&piix4_adapter.dev, "Bus collision! SMBus may be " "locked until next hard reset. (sorry!)\n"); /* Clock stops and slave is stuck in mid-transmission */ } if (temp & 0x04) { - result = -1; + result = -ENXIO; dev_dbg(&piix4_adapter.dev, "Error: no response!\n"); } @@ -309,17 +309,18 @@ static int piix4_transaction(void) return result; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { int i, len; + int status; switch (size) { case I2C_SMBUS_PROC_CALL: dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); - return -1; + return -EOPNOTSUPP; case I2C_SMBUS_QUICK: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); @@ -371,8 +372,9 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); - if (piix4_transaction()) /* Error in transaction */ - return -1; + status = piix4_transaction(); + if (status) + return status; if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK)) return 0; diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 9ca8f9155f95..328441bb5470 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -236,7 +236,7 @@ static int sis5595_transaction(struct i2c_adapter *adap) sis5595_write(SMB_STS_HI, temp >> 8); if ((temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8)) != 0x00) { dev_dbg(&adap->dev, "Failed! (%02x)\n", temp); - return -1; + return -EBUSY; } else { dev_dbg(&adap->dev, "Successful!\n"); } @@ -254,19 +254,19 @@ static int sis5595_transaction(struct i2c_adapter *adap) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); - result = -1; + result = -ETIMEDOUT; } if (temp & 0x10) { dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); - result = -1; + result = -ENXIO; } if (temp & 0x20) { dev_err(&adap->dev, "Bus collision! SMBus may be locked until " "next hard reset (or not...)\n"); /* Clock stops and slave is stuck in mid-transmission */ - result = -1; + result = -EIO; } temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8); @@ -282,11 +282,13 @@ static int sis5595_transaction(struct i2c_adapter *adap) return result; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 sis5595_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data) { + int status; + switch (size) { case I2C_SMBUS_QUICK: sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); @@ -318,13 +320,14 @@ static s32 sis5595_access(struct i2c_adapter *adap, u16 addr, break; default: dev_warn(&adap->dev, "Unsupported transaction %d\n", size); - return -1; + return -EOPNOTSUPP; } sis5595_write(SMB_CTL_LO, ((size & 0x0E))); - if (sis5595_transaction(adap)) - return -1; + status = sis5595_transaction(adap); + if (status) + return status; if ((size != SIS5595_PROC_CALL) && ((read_write == I2C_SMBUS_WRITE) || (size == SIS5595_QUICK))) diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 3765dd7f450f..c4cc5eddf50d 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -134,7 +134,7 @@ static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldc if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) { dev_dbg(&adap->dev, "Failed! (%02x)\n", temp); - return -1; + return -EBUSY; } else { dev_dbg(&adap->dev, "Successful!\n"); } @@ -177,17 +177,17 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); - result = -1; + result = -ETIMEDOUT; } if (temp & 0x02) { dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); - result = -1; + result = -ENXIO; } if (temp & 0x04) { dev_err(&adap->dev, "Bus collision!\n"); - result = -1; + result = -EIO; /* TBD: Datasheet say: the software should clear this bit and restart SMBUS operation. @@ -250,8 +250,10 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat if (i==8 || (len<8 && i==len)) { dev_dbg(&adap->dev, "start trans len=%d i=%d\n",len ,i); /* first transaction */ - if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock)) - return -1; + rc = sis630_transaction_start(adap, + SIS630_BLOCK_DATA, &oldclock); + if (rc) + return rc; } else if ((i-1)%8 == 7 || i==len) { dev_dbg(&adap->dev, "trans_wait len=%d i=%d\n",len,i); @@ -264,9 +266,10 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat */ sis630_write(SMB_STS,0x10); } - if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) { + rc = sis630_transaction_wait(adap, + SIS630_BLOCK_DATA); + if (rc) { dev_dbg(&adap->dev, "trans_wait failed\n"); - rc = -1; break; } } @@ -275,13 +278,14 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat else { /* read request */ data->block[0] = len = 0; - if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock)) { - return -1; - } + rc = sis630_transaction_start(adap, + SIS630_BLOCK_DATA, &oldclock); + if (rc) + return rc; do { - if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) { + rc = sis630_transaction_wait(adap, SIS630_BLOCK_DATA); + if (rc) { dev_dbg(&adap->dev, "trans_wait failed\n"); - rc = -1; break; } /* if this first transaction then read byte count */ @@ -311,11 +315,13 @@ static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *dat return rc; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 sis630_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data) { + int status; + switch (size) { case I2C_SMBUS_QUICK: sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); @@ -350,13 +356,13 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr, size = SIS630_BLOCK_DATA; return sis630_block_data(adap, data, read_write); default: - printk("Unsupported I2C size\n"); - return -1; - break; + printk("Unsupported SMBus operation\n"); + return -EOPNOTSUPP; } - if (sis630_transaction(adap, size)) - return -1; + status = sis630_transaction(adap, size); + if (status) + return status; if ((size != SIS630_PCALL) && ((read_write == I2C_SMBUS_WRITE) || (size == SIS630_QUICK))) { @@ -373,8 +379,7 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr, data->word = sis630_read(SMB_BYTE) + (sis630_read(SMB_BYTE + 1) << 8); break; default: - return -1; - break; + return -EOPNOTSUPP; } return 0; diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index dc235bb8e24d..29757b2e11dd 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -111,7 +111,7 @@ static int sis96x_transaction(int size) /* check it again */ if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) { dev_dbg(&sis96x_adapter.dev, "Failed (0x%02x)\n", temp); - return -1; + return -EBUSY; } else { dev_dbg(&sis96x_adapter.dev, "Successful\n"); } @@ -136,19 +136,19 @@ static int sis96x_transaction(int size) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp); - result = -1; + result = -ETIMEDOUT; } /* device error - probably missing ACK */ if (temp & 0x02) { dev_dbg(&sis96x_adapter.dev, "Failed bus transaction!\n"); - result = -1; + result = -ENXIO; } /* bus collision */ if (temp & 0x04) { dev_dbg(&sis96x_adapter.dev, "Bus collision!\n"); - result = -1; + result = -EIO; } /* Finish up by resetting the bus */ @@ -161,11 +161,12 @@ static int sis96x_transaction(int size) return result; } -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 sis96x_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { + int status; switch (size) { case I2C_SMBUS_QUICK: @@ -203,17 +204,17 @@ static s32 sis96x_access(struct i2c_adapter * adap, u16 addr, case I2C_SMBUS_BLOCK_DATA: /* TO DO: */ dev_info(&adap->dev, "SMBus block not implemented!\n"); - return -1; + return -EOPNOTSUPP; break; default: - dev_info(&adap->dev, "Unsupported I2C size\n"); - return -1; - break; + dev_info(&adap->dev, "Unsupported SMBus operation\n"); + return -EOPNOTSUPP; } - if (sis96x_transaction(size)) - return -1; + status = sis96x_transaction(size); + if (status) + return status; if ((size != SIS96x_PROC_CALL) && ((read_write == I2C_SMBUS_WRITE) || (size == SIS96x_QUICK))) diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c index d08eeec53913..e37ccd80f77a 100644 --- a/drivers/i2c/busses/i2c-stub.c +++ b/drivers/i2c/busses/i2c-stub.c @@ -43,7 +43,7 @@ struct stub_chip { static struct stub_chip *stub_chips; -/* Return -1 on error. */ +/* Return negative errno on error. */ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { @@ -120,7 +120,7 @@ static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, default: dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n"); - ret = -1; + ret = -EOPNOTSUPP; break; } /* switch (size) */ diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 77b13d027f86..7628fe8e0946 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -152,7 +152,7 @@ static int vt596_transaction(u8 size) if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { dev_err(&vt596_adapter.dev, "SMBus reset failed! " "(0x%02x)\n", temp); - return -1; + return -EBUSY; } } @@ -167,24 +167,24 @@ static int vt596_transaction(u8 size) /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { - result = -1; + result = -ETIMEDOUT; dev_err(&vt596_adapter.dev, "SMBus timeout!\n"); } if (temp & 0x10) { - result = -1; + result = -EIO; dev_err(&vt596_adapter.dev, "Transaction failed (0x%02x)\n", size); } if (temp & 0x08) { - result = -1; + result = -EIO; dev_err(&vt596_adapter.dev, "SMBus collision!\n"); } if (temp & 0x04) { int read = inb_p(SMBHSTADD) & 0x01; - result = -1; + result = -ENXIO; /* The quick and receive byte commands are used to probe for chips, so errors are expected, and we don't want to frighten the user. */ @@ -202,12 +202,13 @@ static int vt596_transaction(u8 size) return result; } -/* Return -1 on error, 0 on success */ +/* Return negative errno on error, 0 on success */ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data) { int i; + int status; switch (size) { case I2C_SMBUS_QUICK: @@ -258,8 +259,9 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, outb_p(((addr & 0x7f) << 1) | read_write, SMBHSTADD); - if (vt596_transaction(size)) /* Error in transaction */ - return -1; + status = vt596_transaction(size); + if (status) + return status; if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK)) return 0; @@ -287,7 +289,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, exit_unsupported: dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n", size); - return -1; + return -EOPNOTSUPP; } static u32 vt596_func(struct i2c_adapter *adapter) -- cgit v1.2.3 From fa63cd56d2f09806169307d761e8f430e23bc09b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:25 +0200 Subject: i2c-piix4: Various cleanups and minor fixes The i2c-piix4 driver was used recently as a model to write a new SMBus host controller driver and this made me realize that the code of this old driver wasn't exactly good. So, here are many cleanups and minor fixes to this driver, so that these minor mistakes aren't duplicated again: * Delete unused structure. * Delete needless forward function declaration. * Properly announce the SMBus host controller as we find it. * Spell it SMBus not SMB. * Return -EBUSY instead of -ENODEV when the I/O region is already in use. * Drop useless masks on the 7-bit address and the R/W bit. * Reject block transaction requests with an invalid block length. * Check and report block transaction replies with an invalid block length. * Delete a useless comment. Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-piix4.c | 41 +++++++++++++++-------------------------- 1 file changed, 15 insertions(+), 26 deletions(-) diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index dc76c0e2dc65..77aaa5fe5e38 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -42,13 +42,6 @@ #include -struct sd { - const unsigned short mfr; - const unsigned short dev; - const unsigned char fn; - const char *name; -}; - /* PIIX4 SMBus address offsets */ #define SMBHSTSTS (0 + piix4_smba) #define SMBHSLVSTS (1 + piix4_smba) @@ -101,8 +94,6 @@ MODULE_PARM_DESC(force_addr, "Forcibly enable the PIIX4 at the given address. " "EXTREMELY DANGEROUS!"); -static int piix4_transaction(void); - static unsigned short piix4_smba; static int srvrworks_csb5_delay; static struct pci_driver piix4_driver; @@ -141,8 +132,6 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, { unsigned char temp; - dev_info(&PIIX4_dev->dev, "Found %s device\n", pci_name(PIIX4_dev)); - if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) && (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5)) srvrworks_csb5_delay = 1; @@ -172,7 +161,7 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba); piix4_smba &= 0xfff0; if(piix4_smba == 0) { - dev_err(&PIIX4_dev->dev, "SMB base address " + dev_err(&PIIX4_dev->dev, "SMBus base address " "uninitialized - upgrade BIOS or use " "force_addr=0xaddr\n"); return -ENODEV; @@ -180,9 +169,9 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, } if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { - dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n", + dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", piix4_smba); - return -ENODEV; + return -EBUSY; } pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp); @@ -228,13 +217,13 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, "(or code out of date)!\n"); pci_read_config_byte(PIIX4_dev, SMBREV, &temp); - dev_dbg(&PIIX4_dev->dev, "SMBREV = 0x%X\n", temp); - dev_dbg(&PIIX4_dev->dev, "SMBA = 0x%X\n", piix4_smba); + dev_info(&PIIX4_dev->dev, + "SMBus Host Controller at 0x%x, revision %d\n", + piix4_smba, temp); return 0; } -/* Another internally used function */ static int piix4_transaction(void) { int temp; @@ -322,19 +311,19 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); return -EOPNOTSUPP; case I2C_SMBUS_QUICK: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + outb_p((addr << 1) | read_write, SMBHSTADD); size = PIIX4_QUICK; break; case I2C_SMBUS_BYTE: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + outb_p((addr << 1) | read_write, SMBHSTADD); if (read_write == I2C_SMBUS_WRITE) outb_p(command, SMBHSTCMD); size = PIIX4_BYTE; break; case I2C_SMBUS_BYTE_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + outb_p((addr << 1) | read_write, SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) @@ -342,7 +331,7 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, size = PIIX4_BYTE_DATA; break; case I2C_SMBUS_WORD_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + outb_p((addr << 1) | read_write, SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { @@ -352,15 +341,13 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, size = PIIX4_WORD_DATA; break; case I2C_SMBUS_BLOCK_DATA: - outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + outb_p((addr << 1) | read_write, SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { len = data->block[0]; - if (len < 0) - len = 0; - if (len > 32) - len = 32; + if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) + return -EINVAL; outb_p(len, SMBHSTDAT0); i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= len; i++) @@ -390,6 +377,8 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, break; case PIIX4_BLOCK_DATA: data->block[0] = inb_p(SMBHSTDAT0); + if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX) + return -EPROTO; i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= data->block[0]; i++) data->block[i] = inb_p(SMBBLKDAT); -- cgit v1.2.3 From ac7fc4fb2b6a126af8d07f46500440c9641976cf Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:25 +0200 Subject: i2c: Consistently reject unsupported transactions Many PC SMBus host controller drivers don't properly handle the case where they are requested to achieve a transaction they do not support. Update them so that the consistently print a warning message and return a single error value in this case. Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-ali1535.c | 8 ++++---- drivers/i2c/busses/i2c-ali1563.c | 8 ++++---- drivers/i2c/busses/i2c-ali15x3.c | 6 +++--- drivers/i2c/busses/i2c-amd756.c | 8 +++----- drivers/i2c/busses/i2c-i801.c | 1 - drivers/i2c/busses/i2c-piix4.c | 6 +++--- drivers/i2c/busses/i2c-sis630.c | 5 ++--- drivers/i2c/busses/i2c-sis96x.c | 8 +------- drivers/i2c/busses/i2c-taos-evm.c | 5 ++--- drivers/i2c/busses/i2c-viapro.c | 2 +- 10 files changed, 23 insertions(+), 34 deletions(-) diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index c21e4d96382e..704436cdec8e 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -357,10 +357,6 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr, outb_p(0xFF, SMBHSTSTS); switch (size) { - case I2C_SMBUS_PROC_CALL: - dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); - result = -EOPNOTSUPP; - goto EXIT; case I2C_SMBUS_QUICK: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); @@ -418,6 +414,10 @@ static s32 ali1535_access(struct i2c_adapter *adap, u16 addr, outb_p(data->block[i], SMBBLKDAT); } break; + default: + dev_warn(&adap->dev, "Unsupported transaction %d\n", size); + result = -EOPNOTSUPP; + goto EXIT; } result = ali1535_transaction(adap); diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 30bd3ee70386..da5a382eee93 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -246,10 +246,6 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, /* Map the size to what the chip understands */ switch (size) { - case I2C_SMBUS_PROC_CALL: - dev_err(&a->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); - error = -EINVAL; - break; case I2C_SMBUS_QUICK: size = HST_CNTL2_QUICK; break; @@ -265,6 +261,10 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, case I2C_SMBUS_BLOCK_DATA: size = HST_CNTL2_BLOCK; break; + default: + dev_warn(&a->dev, "Unsupported transaction %d\n", size); + error = -EOPNOTSUPP; + goto Done; } outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD); diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 3d752561dc37..7b029b147a8e 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -362,9 +362,6 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr, } switch (size) { - case I2C_SMBUS_PROC_CALL: - dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); - return -EOPNOTSUPP; case I2C_SMBUS_QUICK: outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD); @@ -417,6 +414,9 @@ static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr, } size = ALI15X3_BLOCK_DATA; break; + default: + dev_warn(&adap->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; } outb_p(size, SMBHSTCNT); /* output command */ diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 3d5bcb65e9e0..f0baea62067d 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -200,12 +200,7 @@ static s32 amd756_access(struct i2c_adapter * adap, u16 addr, int i, len; int status; - /** TODO: Should I supporte the 10-bit transfers? */ switch (size) { - case I2C_SMBUS_PROC_CALL: - dev_dbg(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); - /* TODO: Well... It is supported, I'm just not sure what to do here... */ - return -EOPNOTSUPP; case I2C_SMBUS_QUICK: outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMB_HOST_ADDRESS); @@ -252,6 +247,9 @@ static s32 amd756_access(struct i2c_adapter * adap, u16 addr, } size = AMD756_BLOCK_DATA; break; + default: + dev_warn(&adap->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; } /* How about enabling interrupts... */ diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 7d6d9dfcc58a..213119211e58 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -513,7 +513,6 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr, outb_p(command, SMBHSTCMD); block = 1; break; - case I2C_SMBUS_PROC_CALL: default: dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size); return -EOPNOTSUPP; diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 77aaa5fe5e38..2bde47509e1a 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -307,9 +307,6 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, int status; switch (size) { - case I2C_SMBUS_PROC_CALL: - dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); - return -EOPNOTSUPP; case I2C_SMBUS_QUICK: outb_p((addr << 1) | read_write, SMBHSTADD); @@ -355,6 +352,9 @@ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, } size = PIIX4_BLOCK_DATA; break; + default: + dev_warn(&adap->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; } outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index c4cc5eddf50d..d7e6ff3e0187 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -356,7 +356,8 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr, size = SIS630_BLOCK_DATA; return sis630_block_data(adap, data, read_write); default: - printk("Unsupported SMBus operation\n"); + dev_warn(&adap->dev, "Unsupported transaction %d\n", + size); return -EOPNOTSUPP; } @@ -378,8 +379,6 @@ static s32 sis630_access(struct i2c_adapter *adap, u16 addr, case SIS630_WORD_DATA: data->word = sis630_read(SMB_BYTE) + (sis630_read(SMB_BYTE + 1) << 8); break; - default: - return -EOPNOTSUPP; } return 0; diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 29757b2e11dd..cde8e5880368 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -201,14 +201,8 @@ static s32 sis96x_access(struct i2c_adapter * adap, u16 addr, SIS96x_PROC_CALL : SIS96x_WORD_DATA); break; - case I2C_SMBUS_BLOCK_DATA: - /* TO DO: */ - dev_info(&adap->dev, "SMBus block not implemented!\n"); - return -EOPNOTSUPP; - break; - default: - dev_info(&adap->dev, "Unsupported SMBus operation\n"); + dev_warn(&adap->dev, "Unsupported transaction %d\n", size); return -EOPNOTSUPP; } diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c index de9db49e54d9..224aa12ee7c8 100644 --- a/drivers/i2c/busses/i2c-taos-evm.c +++ b/drivers/i2c/busses/i2c-taos-evm.c @@ -96,9 +96,8 @@ static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr, sprintf(p, "$%02X", command); break; default: - dev_dbg(&adapter->dev, "Unsupported transaction size %d\n", - size); - return -EINVAL; + dev_warn(&adapter->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; } /* Send the transaction to the TAOS EVM */ diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 7628fe8e0946..c611905df009 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -287,7 +287,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr, return 0; exit_unsupported: - dev_warn(&vt596_adapter.dev, "Unsupported command invoked! (0x%02x)\n", + dev_warn(&vt596_adapter.dev, "Unsupported transaction %d\n", size); return -EOPNOTSUPP; } -- cgit v1.2.3 From c80ebe7987931ec4e80abc33ebf8aa2dad0d3763 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 14 Jul 2008 22:38:26 +0200 Subject: i2c-pca-algo: Fix error code Give a more concrete error code, when the bus is not idle. Signed-off-by: Wolfram Sang Signed-off-by: Jean Delvare --- drivers/i2c/algos/i2c-algo-pca.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index e954a20b97a6..d50b329a3c94 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -182,7 +182,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap, } if (state != 0xf8) { dev_dbg(&i2c_adap->dev, "bus is not idle. status is %#04x\n", state); - return -EIO; + return -EAGAIN; } DEB1("{{{ XFER %d messages\n", num); -- cgit v1.2.3 From 7650da023eb05426812bbf8999b69dc93fee67ab Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 14 Jul 2008 22:38:26 +0200 Subject: i2c-pca-platform: Fix error code Fix errorcode to be more descriptive when ioremap fails. Signed-off-by: Wolfram Sang Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-pca-platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index 9d75f51e8f0e..6bb15ad0a6b6 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -163,7 +163,7 @@ static int __devinit i2c_pca_pf_probe(struct platform_device *pdev) i2c->reg_base = ioremap(res->start, res_len(res)); if (!i2c->reg_base) { - ret = -EIO; + ret = -ENOMEM; goto e_remap; } i2c->io_base = res->start; -- cgit v1.2.3 From 6a03cd931196673634b58c955d2f9d42da602045 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Mon, 14 Jul 2008 22:38:26 +0200 Subject: i2c: Use list_for_each_entry_safe Use list_for_each_entry_safe() in i2c_del_adapter() and i2c_del_driver(). Signed-off-by: Matthias Kaehlcke Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index b995502400b8..1a71645038f0 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -580,8 +580,7 @@ static int i2c_do_del_adapter(struct device_driver *d, void *data) */ int i2c_del_adapter(struct i2c_adapter *adap) { - struct list_head *item, *_n; - struct i2c_client *client; + struct i2c_client *client, *_n; int res = 0; mutex_lock(&core_lock); @@ -602,10 +601,9 @@ int i2c_del_adapter(struct i2c_adapter *adap) /* detach any active clients. This must be done first, because * it can fail; in which case we give up. */ - list_for_each_safe(item, _n, &adap->clients) { + list_for_each_entry_safe(client, _n, &adap->clients, list) { struct i2c_driver *driver; - client = list_entry(item, struct i2c_client, list); driver = client->driver; /* new style, follow standard driver model */ @@ -718,11 +716,9 @@ static int __detach_adapter(struct device *dev, void *data) "detach_adapter failed for driver [%s]\n", driver->driver.name); } else { - struct list_head *item, *_n; - struct i2c_client *client; + struct i2c_client *client, *_n; - list_for_each_safe(item, _n, &adapter->clients) { - client = list_entry(item, struct i2c_client, list); + list_for_each_entry_safe(client, _n, &adapter->clients, list) { if (client->driver != driver) continue; dev_dbg(&adapter->dev, -- cgit v1.2.3 From f7050bd716047a4dfec7d061e28df7ffd6815ebd Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:26 +0200 Subject: i2c: Simplify i2c_del_driver() i2c_del_driver() can be simplified a bit. Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 1a71645038f0..e06067ebd205 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -743,13 +743,11 @@ void i2c_del_driver(struct i2c_driver *driver) { mutex_lock(&core_lock); - /* new-style driver? */ - if (is_newstyle_driver(driver)) - goto unregister; - - class_for_each_device(&i2c_adapter_class, driver, __detach_adapter); + /* legacy driver? */ + if (!is_newstyle_driver(driver)) + class_for_each_device(&i2c_adapter_class, driver, + __detach_adapter); - unregister: driver_unregister(&driver->driver); pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name); -- cgit v1.2.3 From 5bc1200852c3dfc312481f57622f48b289ac802e Mon Sep 17 00:00:00 2001 From: Alek Du Date: Mon, 14 Jul 2008 22:38:27 +0200 Subject: i2c: Add Intel SCH SMBus support New i2c bus driver for the Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L). Signed-off-by: Alek Du Signed-off-by: Jean Delvare --- drivers/i2c/busses/Kconfig | 10 ++ drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-isch.c | 336 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 347 insertions(+) create mode 100644 drivers/i2c/busses/i2c-isch.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 2b0874b0ad11..56b6f29c9a3c 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -101,6 +101,16 @@ config I2C_I801 This driver can also be built as a module. If so, the module will be called i2c-i801. +config I2C_ISCH + tristate "Intel SCH SMBus 1.0" + depends on PCI + help + Say Y here if you want to use SMBus controller on the Intel SCH + based systems. + + This driver can also be built as a module. If so, the module + will be called i2c-isch. + config I2C_PIIX4 tristate "Intel PIIX4 and compatible (ATI/Serverworks/Broadcom/SMSC)" depends on PCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 48a6a5bddc5e..cbeac7dc9bfc 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o obj-$(CONFIG_I2C_I801) += i2c-i801.o +obj-$(CONFIG_I2C_ISCH) += i2c-isch.o obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o obj-$(CONFIG_I2C_NFORCE2_S4985) += i2c-nforce2-s4985.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c new file mode 100644 index 000000000000..c9cd46b22692 --- /dev/null +++ b/drivers/i2c/busses/i2c-isch.c @@ -0,0 +1,336 @@ +/* + i2c-isch.c - Linux kernel driver for Intel SCH chipset SMBus + - Based on i2c-piix4.c + Copyright (c) 1998 - 2002 Frodo Looijaard and + Philip Edelbrock + - Intel SCH support + Copyright (c) 2007 - 2008 Jacob Jun Pan + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License version 2 as + published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + Supports: + Intel SCH chipsets (AF82US15W, AF82US15L, AF82UL11L) + Note: we assume there can only be one device, with one SMBus interface. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* SCH SMBus address offsets */ +#define SMBHSTCNT (0 + sch_smba) +#define SMBHSTSTS (1 + sch_smba) +#define SMBHSTADD (4 + sch_smba) /* TSA */ +#define SMBHSTCMD (5 + sch_smba) +#define SMBHSTDAT0 (6 + sch_smba) +#define SMBHSTDAT1 (7 + sch_smba) +#define SMBBLKDAT (0x20 + sch_smba) + +/* count for request_region */ +#define SMBIOSIZE 64 + +/* PCI Address Constants */ +#define SMBBA_SCH 0x40 + +/* Other settings */ +#define MAX_TIMEOUT 500 + +/* I2C constants */ +#define SCH_QUICK 0x00 +#define SCH_BYTE 0x01 +#define SCH_BYTE_DATA 0x02 +#define SCH_WORD_DATA 0x03 +#define SCH_BLOCK_DATA 0x05 + +static unsigned short sch_smba; +static struct pci_driver sch_driver; +static struct i2c_adapter sch_adapter; + +/* + * Start the i2c transaction -- the i2c_access will prepare the transaction + * and this function will execute it. + * return 0 for success and others for failure. + */ +static int sch_transaction(void) +{ + int temp; + int result = 0; + int timeout = 0; + + dev_dbg(&sch_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb(SMBHSTCNT), + inb(SMBHSTCMD), inb(SMBHSTADD), inb(SMBHSTDAT0), + inb(SMBHSTDAT1)); + + /* Make sure the SMBus host is ready to start transmitting */ + temp = inb(SMBHSTSTS) & 0x0f; + if (temp) { + /* Can not be busy since we checked it in sch_access */ + if (temp & 0x01) { + dev_dbg(&sch_adapter.dev, "Completion (%02x). " + "Clear...\n", temp); + } + if (temp & 0x06) { + dev_dbg(&sch_adapter.dev, "SMBus error (%02x). " + "Resetting...\n", temp); + } + outb(temp, SMBHSTSTS); + temp = inb(SMBHSTSTS) & 0x0f; + if (temp) { + dev_err(&sch_adapter.dev, + "SMBus is not ready: (%02x)\n", temp); + return -EAGAIN; + } + } + + /* start the transaction by setting bit 4 */ + outb(inb(SMBHSTCNT) | 0x10, SMBHSTCNT); + + do { + msleep(1); + temp = inb(SMBHSTSTS) & 0x0f; + } while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + dev_err(&sch_adapter.dev, "SMBus Timeout!\n"); + result = -ETIMEDOUT; + } + if (temp & 0x04) { + result = -EIO; + dev_dbg(&sch_adapter.dev, "Bus collision! SMBus may be " + "locked until next hard reset. (sorry!)\n"); + /* Clock stops and slave is stuck in mid-transmission */ + } else if (temp & 0x02) { + result = -EIO; + dev_err(&sch_adapter.dev, "Error: no response!\n"); + } else if (temp & 0x01) { + dev_dbg(&sch_adapter.dev, "Post complete!\n"); + outb(temp, SMBHSTSTS); + temp = inb(SMBHSTSTS) & 0x07; + if (temp & 0x06) { + /* Completion clear failed */ + dev_dbg(&sch_adapter.dev, "Failed reset at end of " + "transaction (%02x), Bus error!\n", temp); + } + } else { + result = -ENXIO; + dev_dbg(&sch_adapter.dev, "No such address.\n"); + } + dev_dbg(&sch_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb(SMBHSTCNT), + inb(SMBHSTCMD), inb(SMBHSTADD), inb(SMBHSTDAT0), + inb(SMBHSTDAT1)); + return result; +} + +/* + * This is the main access entry for i2c-sch access + * adap is i2c_adapter pointer, addr is the i2c device bus address, read_write + * (0 for read and 1 for write), size is i2c transaction type and data is the + * union of transaction for data to be transfered or data read from bus. + * return 0 for success and others for failure. + */ +static s32 sch_access(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data) +{ + int i, len, temp, rc; + + /* Make sure the SMBus host is not busy */ + temp = inb(SMBHSTSTS) & 0x0f; + if (temp & 0x08) { + dev_dbg(&sch_adapter.dev, "SMBus busy (%02x)\n", temp); + return -EAGAIN; + } + dev_dbg(&sch_adapter.dev, "access size: %d %s\n", size, + (read_write)?"READ":"WRITE"); + switch (size) { + case I2C_SMBUS_QUICK: + outb((addr << 1) | read_write, SMBHSTADD); + size = SCH_QUICK; + break; + case I2C_SMBUS_BYTE: + outb((addr << 1) | read_write, SMBHSTADD); + if (read_write == I2C_SMBUS_WRITE) + outb(command, SMBHSTCMD); + size = SCH_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + outb((addr << 1) | read_write, SMBHSTADD); + outb(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) + outb(data->byte, SMBHSTDAT0); + size = SCH_BYTE_DATA; + break; + case I2C_SMBUS_WORD_DATA: + outb((addr << 1) | read_write, SMBHSTADD); + outb(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + outb(data->word & 0xff, SMBHSTDAT0); + outb((data->word & 0xff00) >> 8, SMBHSTDAT1); + } + size = SCH_WORD_DATA; + break; + case I2C_SMBUS_BLOCK_DATA: + outb((addr << 1) | read_write, SMBHSTADD); + outb(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) + return -EINVAL; + outb(len, SMBHSTDAT0); + for (i = 1; i <= len; i++) + outb(data->block[i], SMBBLKDAT+i-1); + } + size = SCH_BLOCK_DATA; + break; + default: + dev_warn(&adap->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; + } + dev_dbg(&sch_adapter.dev, "write size %d to 0x%04x\n", size, SMBHSTCNT); + outb((inb(SMBHSTCNT) & 0xb0) | (size & 0x7), SMBHSTCNT); + + rc = sch_transaction(); + if (rc) /* Error in transaction */ + return rc; + + if ((read_write == I2C_SMBUS_WRITE) || (size == SCH_QUICK)) + return 0; + + switch (size) { + case SCH_BYTE: + case SCH_BYTE_DATA: + data->byte = inb(SMBHSTDAT0); + break; + case SCH_WORD_DATA: + data->word = inb(SMBHSTDAT0) + (inb(SMBHSTDAT1) << 8); + break; + case SCH_BLOCK_DATA: + data->block[0] = inb(SMBHSTDAT0); + if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX) + return -EPROTO; + for (i = 1; i <= data->block[0]; i++) + data->block[i] = inb(SMBBLKDAT+i-1); + break; + } + return 0; +} + +static u32 sch_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static const struct i2c_algorithm smbus_algorithm = { + .smbus_xfer = sch_access, + .functionality = sch_func, +}; + +static struct i2c_adapter sch_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &smbus_algorithm, +}; + +static struct pci_device_id sch_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SCH_LPC) }, + { 0, } +}; + +MODULE_DEVICE_TABLE(pci, sch_ids); + +static int __devinit sch_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + int retval; + unsigned int smba; + + pci_read_config_dword(dev, SMBBA_SCH, &smba); + if (!(smba & (1 << 31))) { + dev_err(&dev->dev, "SMBus I/O space disabled!\n"); + return -ENODEV; + } + + sch_smba = (unsigned short)smba; + if (sch_smba == 0) { + dev_err(&dev->dev, "SMBus base address uninitialized!\n"); + return -ENODEV; + } + if (!request_region(sch_smba, SMBIOSIZE, sch_driver.name)) { + dev_err(&dev->dev, "SMBus region 0x%x already in use!\n", + sch_smba); + return -EBUSY; + } + dev_dbg(&dev->dev, "SMBA = 0x%X\n", sch_smba); + + /* set up the sysfs linkage to our parent device */ + sch_adapter.dev.parent = &dev->dev; + + snprintf(sch_adapter.name, sizeof(sch_adapter.name), + "SMBus SCH adapter at %04x", sch_smba); + + retval = i2c_add_adapter(&sch_adapter); + if (retval) { + dev_err(&dev->dev, "Couldn't register adapter!\n"); + release_region(sch_smba, SMBIOSIZE); + sch_smba = 0; + } + + return retval; +} + +static void __devexit sch_remove(struct pci_dev *dev) +{ + if (sch_smba) { + i2c_del_adapter(&sch_adapter); + release_region(sch_smba, SMBIOSIZE); + sch_smba = 0; + } +} + +static struct pci_driver sch_driver = { + .name = "isch_smbus", + .id_table = sch_ids, + .probe = sch_probe, + .remove = __devexit_p(sch_remove), +}; + +static int __init i2c_sch_init(void) +{ + return pci_register_driver(&sch_driver); +} + +static void __exit i2c_sch_exit(void) +{ + pci_unregister_driver(&sch_driver); +} + +MODULE_AUTHOR("Jacob Pan "); +MODULE_DESCRIPTION("Intel SCH SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_sch_init); +module_exit(i2c_sch_exit); -- cgit v1.2.3 From 77e38bffe0fcaa48f0be68eaa1de4a59d1fd93ad Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 14 Jul 2008 22:38:27 +0200 Subject: i2c: Push ioctl BKL down into the i2c code This is part of the effort to get rid of the BKL. [JD: In fact i2c-dev doesn't need more locking than is already done for the other i2c drivers, so we can simply switch to unlocked_ioctl.] Signed-off-by: Alan Cox Signed-off-by: Jean Delvare --- drivers/i2c/i2c-dev.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index d34c14c81c29..e96d98696782 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -366,8 +366,7 @@ static noinline int i2cdev_ioctl_smbus(struct i2c_client *client, return res; } -static int i2cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long i2cdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct i2c_client *client = (struct i2c_client *)file->private_data; unsigned long funcs; @@ -487,7 +486,7 @@ static const struct file_operations i2cdev_fops = { .llseek = no_llseek, .read = i2cdev_read, .write = i2cdev_write, - .ioctl = i2cdev_ioctl, + .unlocked_ioctl = i2cdev_ioctl, .open = i2cdev_open, .release = i2cdev_release, }; -- cgit v1.2.3 From 61045dbe9d8d81b1bae4dc1e9482d389ca99edc1 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Mon, 14 Jul 2008 22:38:27 +0200 Subject: i2c: Add support for I2C bus on Freescale CPM1/CPM2 controllers This driver uses the port of 2.4 code from Vitaly Bordug and the actual algorithm used by the i2c driver of the DBox code on cvs.tuxboc.org from Felix Domke (tmbinc@gmx.net) and Gillem (htoa@gmx.net) converted to an of_platform_driver. Tested on CPM1 (MPC823 on dbox2 hardware) and CPM2 (MPC8272). Signed-off-by: Jochen Friedrich Tested-by: Wolfram Sang Signed-off-by: Jean Delvare --- drivers/i2c/busses/Kconfig | 10 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-cpm.c | 745 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 756 insertions(+) create mode 100644 drivers/i2c/busses/i2c-cpm.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 56b6f29c9a3c..6ee997b2817c 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -299,6 +299,16 @@ config I2C_BLACKFIN_TWI_CLK_KHZ help The unit of the TWI clock is kHz. +config I2C_CPM + tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)" + depends on (CPM1 || CPM2) && OF_I2C + help + This supports the use of the I2C interface on Freescale + processors with CPM1 or CPM2. + + This driver can also be built as a module. If so, the module + will be called i2c-cpm. + config I2C_DAVINCI tristate "DaVinci I2C driver" depends on ARCH_DAVINCI diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index cbeac7dc9bfc..97dbfa2107fe 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o obj-$(CONFIG_I2C_AT91) += i2c-at91.o obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o +obj-$(CONFIG_I2C_CPM) += i2c-cpm.o obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c new file mode 100644 index 000000000000..1c955a82dcca --- /dev/null +++ b/drivers/i2c/busses/i2c-cpm.c @@ -0,0 +1,745 @@ +/* + * Freescale CPM1/CPM2 I2C interface. + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net). + * + * moved into proper i2c interface; + * Brad Parker (brad@heeltoe.com) + * + * Parts from dbox2_i2c.c (cvs.tuxbox.org) + * (C) 2000-2001 Felix Domke (tmbinc@gmx.net), Gillem (htoa@gmx.net) + * + * (C) 2007 Montavista Software, Inc. + * Vitaly Bordug + * + * Converted to of_platform_device. Renamed to i2c-cpm.c. + * (C) 2007,2008 Jochen Friedrich + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Try to define this if you have an older CPU (earlier than rev D4) */ +/* However, better use a GPIO based bitbang driver in this case :/ */ +#undef I2C_CHIP_ERRATA + +#define CPM_MAX_READ 513 +#define CPM_MAXBD 4 + +#define I2C_EB (0x10) /* Big endian mode */ +#define I2C_EB_CPM2 (0x30) /* Big endian mode, memory snoop */ + +#define DPRAM_BASE ((u8 __iomem __force *)cpm_muram_addr(0)) + +/* I2C parameter RAM. */ +struct i2c_ram { + ushort rbase; /* Rx Buffer descriptor base address */ + ushort tbase; /* Tx Buffer descriptor base address */ + u_char rfcr; /* Rx function code */ + u_char tfcr; /* Tx function code */ + ushort mrblr; /* Max receive buffer length */ + uint rstate; /* Internal */ + uint rdp; /* Internal */ + ushort rbptr; /* Rx Buffer descriptor pointer */ + ushort rbc; /* Internal */ + uint rxtmp; /* Internal */ + uint tstate; /* Internal */ + uint tdp; /* Internal */ + ushort tbptr; /* Tx Buffer descriptor pointer */ + ushort tbc; /* Internal */ + uint txtmp; /* Internal */ + char res1[4]; /* Reserved */ + ushort rpbase; /* Relocation pointer */ + char res2[2]; /* Reserved */ +}; + +#define I2COM_START 0x80 +#define I2COM_MASTER 0x01 +#define I2CER_TXE 0x10 +#define I2CER_BUSY 0x04 +#define I2CER_TXB 0x02 +#define I2CER_RXB 0x01 +#define I2MOD_EN 0x01 + +/* I2C Registers */ +struct i2c_reg { + u8 i2mod; + u8 res1[3]; + u8 i2add; + u8 res2[3]; + u8 i2brg; + u8 res3[3]; + u8 i2com; + u8 res4[3]; + u8 i2cer; + u8 res5[3]; + u8 i2cmr; +}; + +struct cpm_i2c { + char *base; + struct of_device *ofdev; + struct i2c_adapter adap; + uint dp_addr; + int version; /* CPM1=1, CPM2=2 */ + int irq; + int cp_command; + int freq; + struct i2c_reg __iomem *i2c_reg; + struct i2c_ram __iomem *i2c_ram; + u16 i2c_addr; + wait_queue_head_t i2c_wait; + cbd_t __iomem *tbase; + cbd_t __iomem *rbase; + u_char *txbuf[CPM_MAXBD]; + u_char *rxbuf[CPM_MAXBD]; + u32 txdma[CPM_MAXBD]; + u32 rxdma[CPM_MAXBD]; +}; + +static irqreturn_t cpm_i2c_interrupt(int irq, void *dev_id) +{ + struct cpm_i2c *cpm; + struct i2c_reg __iomem *i2c_reg; + struct i2c_adapter *adap = dev_id; + int i; + + cpm = i2c_get_adapdata(dev_id); + i2c_reg = cpm->i2c_reg; + + /* Clear interrupt. */ + i = in_8(&i2c_reg->i2cer); + out_8(&i2c_reg->i2cer, i); + + dev_dbg(&adap->dev, "Interrupt: %x\n", i); + + wake_up_interruptible(&cpm->i2c_wait); + + return i ? IRQ_HANDLED : IRQ_NONE; +} + +static void cpm_reset_i2c_params(struct cpm_i2c *cpm) +{ + struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram; + + /* Set up the I2C parameters in the parameter ram. */ + out_be16(&i2c_ram->tbase, (u8 __iomem *)cpm->tbase - DPRAM_BASE); + out_be16(&i2c_ram->rbase, (u8 __iomem *)cpm->rbase - DPRAM_BASE); + + if (cpm->version == 1) { + out_8(&i2c_ram->tfcr, I2C_EB); + out_8(&i2c_ram->rfcr, I2C_EB); + } else { + out_8(&i2c_ram->tfcr, I2C_EB_CPM2); + out_8(&i2c_ram->rfcr, I2C_EB_CPM2); + } + + out_be16(&i2c_ram->mrblr, CPM_MAX_READ); + + out_be32(&i2c_ram->rstate, 0); + out_be32(&i2c_ram->rdp, 0); + out_be16(&i2c_ram->rbptr, 0); + out_be16(&i2c_ram->rbc, 0); + out_be32(&i2c_ram->rxtmp, 0); + out_be32(&i2c_ram->tstate, 0); + out_be32(&i2c_ram->tdp, 0); + out_be16(&i2c_ram->tbptr, 0); + out_be16(&i2c_ram->tbc, 0); + out_be32(&i2c_ram->txtmp, 0); +} + +static void cpm_i2c_force_close(struct i2c_adapter *adap) +{ + struct cpm_i2c *cpm = i2c_get_adapdata(adap); + struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg; + + dev_dbg(&adap->dev, "cpm_i2c_force_close()\n"); + + cpm_command(cpm->cp_command, CPM_CR_CLOSE_RX_BD); + + out_8(&i2c_reg->i2cmr, 0x00); /* Disable all interrupts */ + out_8(&i2c_reg->i2cer, 0xff); +} + +static void cpm_i2c_parse_message(struct i2c_adapter *adap, + struct i2c_msg *pmsg, int num, int tx, int rx) +{ + cbd_t __iomem *tbdf; + cbd_t __iomem *rbdf; + u_char addr; + u_char *tb; + u_char *rb; + struct cpm_i2c *cpm = i2c_get_adapdata(adap); + + tbdf = cpm->tbase + tx; + rbdf = cpm->rbase + rx; + + addr = pmsg->addr << 1; + if (pmsg->flags & I2C_M_RD) + addr |= 1; + + tb = cpm->txbuf[tx]; + rb = cpm->rxbuf[rx]; + + /* Align read buffer */ + rb = (u_char *) (((ulong) rb + 1) & ~1); + + tb[0] = addr; /* Device address byte w/rw flag */ + + out_be16(&tbdf->cbd_datlen, pmsg->len + 1); + out_be16(&tbdf->cbd_sc, 0); + + if (!(pmsg->flags & I2C_M_NOSTART)) + setbits16(&tbdf->cbd_sc, BD_I2C_START); + + if (tx + 1 == num) + setbits16(&tbdf->cbd_sc, BD_SC_LAST | BD_SC_WRAP); + + if (pmsg->flags & I2C_M_RD) { + /* + * To read, we need an empty buffer of the proper length. + * All that is used is the first byte for address, the remainder + * is just used for timing (and doesn't really have to exist). + */ + + dev_dbg(&adap->dev, "cpm_i2c_read(abyte=0x%x)\n", addr); + + out_be16(&rbdf->cbd_datlen, 0); + out_be16(&rbdf->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT); + + if (rx + 1 == CPM_MAXBD) + setbits16(&rbdf->cbd_sc, BD_SC_WRAP); + + eieio(); + setbits16(&tbdf->cbd_sc, BD_SC_READY); + } else { + dev_dbg(&adap->dev, "cpm_iic_write(abyte=0x%x)\n", addr); + + memcpy(tb+1, pmsg->buf, pmsg->len); + + eieio(); + setbits16(&tbdf->cbd_sc, BD_SC_READY | BD_SC_INTRPT); + } +} + +static int cpm_i2c_check_message(struct i2c_adapter *adap, + struct i2c_msg *pmsg, int tx, int rx) +{ + cbd_t __iomem *tbdf; + cbd_t __iomem *rbdf; + u_char *tb; + u_char *rb; + struct cpm_i2c *cpm = i2c_get_adapdata(adap); + + tbdf = cpm->tbase + tx; + rbdf = cpm->rbase + rx; + + tb = cpm->txbuf[tx]; + rb = cpm->rxbuf[rx]; + + /* Align read buffer */ + rb = (u_char *) (((uint) rb + 1) & ~1); + + eieio(); + if (pmsg->flags & I2C_M_RD) { + dev_dbg(&adap->dev, "tx sc 0x%04x, rx sc 0x%04x\n", + in_be16(&tbdf->cbd_sc), in_be16(&rbdf->cbd_sc)); + + if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) { + dev_dbg(&adap->dev, "I2C read; No ack\n"); + return -ENXIO; + } + if (in_be16(&rbdf->cbd_sc) & BD_SC_EMPTY) { + dev_err(&adap->dev, + "I2C read; complete but rbuf empty\n"); + return -EREMOTEIO; + } + if (in_be16(&rbdf->cbd_sc) & BD_SC_OV) { + dev_err(&adap->dev, "I2C read; Overrun\n"); + return -EREMOTEIO; + } + memcpy(pmsg->buf, rb, pmsg->len); + } else { + dev_dbg(&adap->dev, "tx sc %d 0x%04x\n", tx, + in_be16(&tbdf->cbd_sc)); + + if (in_be16(&tbdf->cbd_sc) & BD_SC_NAK) { + dev_dbg(&adap->dev, "I2C write; No ack\n"); + return -ENXIO; + } + if (in_be16(&tbdf->cbd_sc) & BD_SC_UN) { + dev_err(&adap->dev, "I2C write; Underrun\n"); + return -EIO; + } + if (in_be16(&tbdf->cbd_sc) & BD_SC_CL) { + dev_err(&adap->dev, "I2C write; Collision\n"); + return -EIO; + } + } + return 0; +} + +static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct cpm_i2c *cpm = i2c_get_adapdata(adap); + struct i2c_reg __iomem *i2c_reg = cpm->i2c_reg; + struct i2c_ram __iomem *i2c_ram = cpm->i2c_ram; + struct i2c_msg *pmsg; + int ret, i; + int tptr; + int rptr; + cbd_t __iomem *tbdf; + cbd_t __iomem *rbdf; + + if (num > CPM_MAXBD) + return -EINVAL; + + /* Check if we have any oversized READ requests */ + for (i = 0; i < num; i++) { + pmsg = &msgs[i]; + if (pmsg->len >= CPM_MAX_READ) + return -EINVAL; + } + + /* Reset to use first buffer */ + out_be16(&i2c_ram->rbptr, in_be16(&i2c_ram->rbase)); + out_be16(&i2c_ram->tbptr, in_be16(&i2c_ram->tbase)); + + tbdf = cpm->tbase; + rbdf = cpm->rbase; + + tptr = 0; + rptr = 0; + + while (tptr < num) { + pmsg = &msgs[tptr]; + dev_dbg(&adap->dev, "R: %d T: %d\n", rptr, tptr); + + cpm_i2c_parse_message(adap, pmsg, num, tptr, rptr); + if (pmsg->flags & I2C_M_RD) + rptr++; + tptr++; + } + /* Start transfer now */ + /* Enable RX/TX/Error interupts */ + out_8(&i2c_reg->i2cmr, I2CER_BUSY | I2CER_TXB | I2CER_RXB); + out_8(&i2c_reg->i2cer, 0xff); /* Clear interrupt status */ + /* Chip bug, set enable here */ + setbits8(&i2c_reg->i2mod, I2MOD_EN); /* Enable */ + /* Begin transmission */ + setbits8(&i2c_reg->i2com, I2COM_START); + + tptr = 0; + rptr = 0; + + while (tptr < num) { + /* Check for outstanding messages */ + dev_dbg(&adap->dev, "test ready.\n"); + pmsg = &msgs[tptr]; + if (pmsg->flags & I2C_M_RD) + ret = wait_event_interruptible_timeout(cpm->i2c_wait, + !(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY), + 1 * HZ); + else + ret = wait_event_interruptible_timeout(cpm->i2c_wait, + !(in_be16(&tbdf[tptr].cbd_sc) & BD_SC_READY), + 1 * HZ); + if (ret == 0) { + ret = -EREMOTEIO; + dev_err(&adap->dev, "I2C transfer: timeout\n"); + goto out_err; + } + if (ret > 0) { + dev_dbg(&adap->dev, "ready.\n"); + ret = cpm_i2c_check_message(adap, pmsg, tptr, rptr); + tptr++; + if (pmsg->flags & I2C_M_RD) + rptr++; + if (ret) + goto out_err; + } + } +#ifdef I2C_CHIP_ERRATA + /* + * Chip errata, clear enable. This is not needed on rev D4 CPUs. + * Disabling I2C too early may cause too short stop condition + */ + udelay(4); + clrbits8(&i2c_reg->i2mod, I2MOD_EN); +#endif + return (num); + +out_err: + cpm_i2c_force_close(adap); +#ifdef I2C_CHIP_ERRATA + /* + * Chip errata, clear enable. This is not needed on rev D4 CPUs. + */ + clrbits8(&i2c_reg->i2mod, I2MOD_EN); +#endif + return ret; +} + +static u32 cpm_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); +} + +/* -----exported algorithm data: ------------------------------------- */ + +static const struct i2c_algorithm cpm_i2c_algo = { + .master_xfer = cpm_i2c_xfer, + .functionality = cpm_i2c_func, +}; + +static const struct i2c_adapter cpm_ops = { + .owner = THIS_MODULE, + .name = "i2c-cpm", + .algo = &cpm_i2c_algo, + .class = I2C_CLASS_HWMON, +}; + +static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) +{ + struct of_device *ofdev = cpm->ofdev; + const u32 *data; + int len, ret, i; + void __iomem *i2c_base; + cbd_t __iomem *tbdf; + cbd_t __iomem *rbdf; + unsigned char brg; + + dev_dbg(&cpm->ofdev->dev, "cpm_i2c_setup()\n"); + + init_waitqueue_head(&cpm->i2c_wait); + + cpm->irq = of_irq_to_resource(ofdev->node, 0, NULL); + if (cpm->irq == NO_IRQ) + return -EINVAL; + + /* Install interrupt handler. */ + ret = request_irq(cpm->irq, cpm_i2c_interrupt, 0, "cpm_i2c", + &cpm->adap); + if (ret) + return ret; + + /* I2C parameter RAM */ + i2c_base = of_iomap(ofdev->node, 1); + if (i2c_base == NULL) { + ret = -EINVAL; + goto out_irq; + } + + if (of_device_is_compatible(ofdev->node, "fsl,cpm1-i2c")) { + + /* Check for and use a microcode relocation patch. */ + cpm->i2c_ram = i2c_base; + cpm->i2c_addr = in_be16(&cpm->i2c_ram->rpbase); + + /* + * Maybe should use cpm_muram_alloc instead of hardcoding + * this in micropatch.c + */ + if (cpm->i2c_addr) { + cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr); + iounmap(i2c_base); + } + + cpm->version = 1; + + } else if (of_device_is_compatible(ofdev->node, "fsl,cpm2-i2c")) { + cpm->i2c_addr = cpm_muram_alloc(sizeof(struct i2c_ram), 64); + cpm->i2c_ram = cpm_muram_addr(cpm->i2c_addr); + out_be16(i2c_base, cpm->i2c_addr); + iounmap(i2c_base); + + cpm->version = 2; + + } else { + iounmap(i2c_base); + ret = -EINVAL; + goto out_irq; + } + + /* I2C control/status registers */ + cpm->i2c_reg = of_iomap(ofdev->node, 0); + if (cpm->i2c_reg == NULL) { + ret = -EINVAL; + goto out_ram; + } + + data = of_get_property(ofdev->node, "fsl,cpm-command", &len); + if (!data || len != 4) { + ret = -EINVAL; + goto out_reg; + } + cpm->cp_command = *data; + + data = of_get_property(ofdev->node, "linux,i2c-class", &len); + if (data && len == 4) + cpm->adap.class = *data; + + data = of_get_property(ofdev->node, "clock-frequency", &len); + if (data && len == 4) + cpm->freq = *data; + else + cpm->freq = 60000; /* use 60kHz i2c clock by default */ + + /* + * Allocate space for CPM_MAXBD transmit and receive buffer + * descriptors in the DP ram. + */ + cpm->dp_addr = cpm_muram_alloc(sizeof(cbd_t) * 2 * CPM_MAXBD, 8); + if (!cpm->dp_addr) { + ret = -ENOMEM; + goto out_reg; + } + + cpm->tbase = cpm_muram_addr(cpm->dp_addr); + cpm->rbase = cpm_muram_addr(cpm->dp_addr + sizeof(cbd_t) * CPM_MAXBD); + + /* Allocate TX and RX buffers */ + + tbdf = cpm->tbase; + rbdf = cpm->rbase; + + for (i = 0; i < CPM_MAXBD; i++) { + cpm->rxbuf[i] = dma_alloc_coherent( + NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL); + if (!cpm->rxbuf[i]) { + ret = -ENOMEM; + goto out_muram; + } + out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1)); + + cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent( + NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL); + if (!cpm->txbuf[i]) { + ret = -ENOMEM; + goto out_muram; + } + out_be32(&tbdf[i].cbd_bufaddr, cpm->txdma[i]); + } + + /* Initialize Tx/Rx parameters. */ + + cpm_reset_i2c_params(cpm); + + dev_dbg(&cpm->ofdev->dev, "i2c_ram %p, i2c_addr 0x%04x\n", + cpm->i2c_ram, cpm->i2c_addr); + dev_dbg(&cpm->ofdev->dev, "tbase 0x%04x, rbase 0x%04x\n", + (u8 __iomem *)cpm->tbase - DPRAM_BASE, + (u8 __iomem *)cpm->rbase - DPRAM_BASE); + + cpm_command(cpm->cp_command, CPM_CR_INIT_TRX); + + /* + * Select an invalid address. Just make sure we don't use loopback mode + */ + out_8(&cpm->i2c_reg->i2add, 0x7f << 1); + + /* + * PDIV is set to 00 in i2mod, so brgclk/32 is used as input to the + * i2c baud rate generator. This is divided by 2 x (DIV + 3) to get + * the actual i2c bus frequency. + */ + brg = get_brgfreq() / (32 * 2 * cpm->freq) - 3; + out_8(&cpm->i2c_reg->i2brg, brg); + + out_8(&cpm->i2c_reg->i2mod, 0x00); + out_8(&cpm->i2c_reg->i2com, I2COM_MASTER); /* Master mode */ + + /* Disable interrupts. */ + out_8(&cpm->i2c_reg->i2cmr, 0); + out_8(&cpm->i2c_reg->i2cer, 0xff); + + return 0; + +out_muram: + for (i = 0; i < CPM_MAXBD; i++) { + if (cpm->rxbuf[i]) + dma_free_coherent(NULL, CPM_MAX_READ + 1, + cpm->rxbuf[i], cpm->rxdma[i]); + if (cpm->txbuf[i]) + dma_free_coherent(NULL, CPM_MAX_READ + 1, + cpm->txbuf[i], cpm->txdma[i]); + } + cpm_muram_free(cpm->dp_addr); +out_reg: + iounmap(cpm->i2c_reg); +out_ram: + if ((cpm->version == 1) && (!cpm->i2c_addr)) + iounmap(cpm->i2c_ram); + if (cpm->version == 2) + cpm_muram_free(cpm->i2c_addr); +out_irq: + free_irq(cpm->irq, &cpm->adap); + return ret; +} + +static void cpm_i2c_shutdown(struct cpm_i2c *cpm) +{ + int i; + + /* Shut down I2C. */ + clrbits8(&cpm->i2c_reg->i2mod, I2MOD_EN); + + /* Disable interrupts */ + out_8(&cpm->i2c_reg->i2cmr, 0); + out_8(&cpm->i2c_reg->i2cer, 0xff); + + free_irq(cpm->irq, &cpm->adap); + + /* Free all memory */ + for (i = 0; i < CPM_MAXBD; i++) { + dma_free_coherent(NULL, CPM_MAX_READ + 1, + cpm->rxbuf[i], cpm->rxdma[i]); + dma_free_coherent(NULL, CPM_MAX_READ + 1, + cpm->txbuf[i], cpm->txdma[i]); + } + + cpm_muram_free(cpm->dp_addr); + iounmap(cpm->i2c_reg); + + if ((cpm->version == 1) && (!cpm->i2c_addr)) + iounmap(cpm->i2c_ram); + if (cpm->version == 2) + cpm_muram_free(cpm->i2c_addr); +} + +static int __devinit cpm_i2c_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + int result, len; + struct cpm_i2c *cpm; + const u32 *data; + + cpm = kzalloc(sizeof(struct cpm_i2c), GFP_KERNEL); + if (!cpm) + return -ENOMEM; + + cpm->ofdev = ofdev; + + dev_set_drvdata(&ofdev->dev, cpm); + + cpm->adap = cpm_ops; + i2c_set_adapdata(&cpm->adap, cpm); + cpm->adap.dev.parent = &ofdev->dev; + + result = cpm_i2c_setup(cpm); + if (result) { + dev_err(&ofdev->dev, "Unable to init hardware\n"); + goto out_free; + } + + /* register new adapter to i2c module... */ + + data = of_get_property(ofdev->node, "linux,i2c-index", &len); + if (data && len == 4) { + cpm->adap.nr = *data; + result = i2c_add_numbered_adapter(&cpm->adap); + } else + result = i2c_add_adapter(&cpm->adap); + + if (result < 0) { + dev_err(&ofdev->dev, "Unable to register with I2C\n"); + goto out_shut; + } + + dev_dbg(&ofdev->dev, "hw routines for %s registered.\n", + cpm->adap.name); + + /* + * register OF I2C devices + */ + of_register_i2c_devices(&cpm->adap, ofdev->node); + + return 0; +out_shut: + cpm_i2c_shutdown(cpm); +out_free: + dev_set_drvdata(&ofdev->dev, NULL); + kfree(cpm); + + return result; +} + +static int __devexit cpm_i2c_remove(struct of_device *ofdev) +{ + struct cpm_i2c *cpm = dev_get_drvdata(&ofdev->dev); + + i2c_del_adapter(&cpm->adap); + + cpm_i2c_shutdown(cpm); + + dev_set_drvdata(&ofdev->dev, NULL); + kfree(cpm); + + return 0; +} + +static const struct of_device_id cpm_i2c_match[] = { + { + .compatible = "fsl,cpm1-i2c", + }, + { + .compatible = "fsl,cpm2-i2c", + }, + {}, +}; + +MODULE_DEVICE_TABLE(of, cpm_i2c_match); + +static struct of_platform_driver cpm_i2c_driver = { + .match_table = cpm_i2c_match, + .probe = cpm_i2c_probe, + .remove = __devexit_p(cpm_i2c_remove), + .driver = { + .name = "fsl-i2c-cpm", + .owner = THIS_MODULE, + } +}; + +static int __init cpm_i2c_init(void) +{ + return of_register_platform_driver(&cpm_i2c_driver); +} + +static void __exit cpm_i2c_exit(void) +{ + of_unregister_platform_driver(&cpm_i2c_driver); +} + +module_init(cpm_i2c_init); +module_exit(cpm_i2c_exit); + +MODULE_AUTHOR("Jochen Friedrich "); +MODULE_DESCRIPTION("I2C-Bus adapter routines for CPM boards"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 3b270804a9345e4a0c493889f98e838692f7bc9b Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 14 Jul 2008 22:38:28 +0200 Subject: i2c-cpm: Bugfixes Bugfixes to the i2c-cpm driver - enable correct interrupts (I2CER_TXE instead of I2CER_BUSY) - replace forgotten iic with i2c - prefix debug-output on init with 0x and add frequency Signed-off-by: Wolfram Sang Acked-by: Jochen Friedrich Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-cpm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 1c955a82dcca..53af744a91c1 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -240,7 +240,7 @@ static void cpm_i2c_parse_message(struct i2c_adapter *adap, eieio(); setbits16(&tbdf->cbd_sc, BD_SC_READY); } else { - dev_dbg(&adap->dev, "cpm_iic_write(abyte=0x%x)\n", addr); + dev_dbg(&adap->dev, "cpm_i2c_write(abyte=0x%x)\n", addr); memcpy(tb+1, pmsg->buf, pmsg->len); @@ -349,7 +349,7 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) } /* Start transfer now */ /* Enable RX/TX/Error interupts */ - out_8(&i2c_reg->i2cmr, I2CER_BUSY | I2CER_TXB | I2CER_RXB); + out_8(&i2c_reg->i2cmr, I2CER_TXE | I2CER_TXB | I2CER_RXB); out_8(&i2c_reg->i2cer, 0xff); /* Clear interrupt status */ /* Chip bug, set enable here */ setbits8(&i2c_reg->i2mod, I2MOD_EN); /* Enable */ @@ -552,8 +552,8 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) cpm_reset_i2c_params(cpm); - dev_dbg(&cpm->ofdev->dev, "i2c_ram %p, i2c_addr 0x%04x\n", - cpm->i2c_ram, cpm->i2c_addr); + dev_dbg(&cpm->ofdev->dev, "i2c_ram 0x%p, i2c_addr 0x%04x, freq %d\n", + cpm->i2c_ram, cpm->i2c_addr, cpm->freq); dev_dbg(&cpm->ofdev->dev, "tbase 0x%04x, rbase 0x%04x\n", (u8 __iomem *)cpm->tbase - DPRAM_BASE, (u8 __iomem *)cpm->rbase - DPRAM_BASE); -- cgit v1.2.3 From 0d2b405a628309310b4fc02b26d713b855ad5f68 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Mon, 14 Jul 2008 22:38:28 +0200 Subject: i2c: Add MAINTAINER entry for i2c-cpm Signed-off-by: Jochen Friedrich Signed-off-by: Jean Delvare --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 56a2f678019e..dd20fe31ea44 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1680,6 +1680,13 @@ L: linuxppc-embedded@ozlabs.org L: linux-kernel@vger.kernel.org S: Maintained +FREESCALE I2C CPM DRIVER +P: Jochen Friedrich +M: jochen@scram.de +L: linuxppc-dev@ozlabs.org +L: i2c@lm-sensors.org +S: Maintained + FREESCALE SOC FS_ENET DRIVER P: Pantelis Antoniou M: pantelis.antoniou@gmail.com -- cgit v1.2.3 From c1b6b4f2342d073698dfc2547240c35045a1d00e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:28 +0200 Subject: i2c: Let framebuffer drivers set their I2C bus class to DDC Let framebuffer drivers set their I2C bus class to DDC. Once this is done, we will be able to tell the eeprom driver to only probe for EDID EEPROMs on these buses. Signed-off-by: Jean Delvare --- drivers/video/fb_ddc.c | 1 + drivers/video/intelfb/intelfb_i2c.c | 12 +++++++----- drivers/video/matrox/i2c-matroxfb.c | 20 +++++++++++++++----- include/linux/i2c.h | 2 +- 4 files changed, 24 insertions(+), 11 deletions(-) diff --git a/drivers/video/fb_ddc.c b/drivers/video/fb_ddc.c index a0df63289b5f..0cf96eb8a60f 100644 --- a/drivers/video/fb_ddc.c +++ b/drivers/video/fb_ddc.c @@ -106,6 +106,7 @@ unsigned char *fb_ddc_read(struct i2c_adapter *adapter) algo_data->setsda(algo_data->data, 1); algo_data->setscl(algo_data->data, 1); + adapter->class |= I2C_CLASS_DDC; return edid; } diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c index ca95f09d8b43..fcf9fadbf572 100644 --- a/drivers/video/intelfb/intelfb_i2c.c +++ b/drivers/video/intelfb/intelfb_i2c.c @@ -100,7 +100,8 @@ static int intelfb_gpio_getsda(void *data) static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo, struct intelfb_i2c_chan *chan, - const u32 reg, const char *name) + const u32 reg, const char *name, + int class) { int rc; @@ -108,6 +109,7 @@ static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo, chan->reg = reg; snprintf(chan->adapter.name, sizeof(chan->adapter.name), "intelfb %s", name); + chan->adapter.class = class; chan->adapter.owner = THIS_MODULE; chan->adapter.id = I2C_HW_B_INTELFB; chan->adapter.algo_data = &chan->algo; @@ -145,7 +147,7 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo) /* setup the DDC bus for analog output */ intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus, GPIOA, - "CRTDDC_A"); + "CRTDDC_A", I2C_CLASS_DDC); i++; /* need to add the output busses for each device @@ -159,9 +161,9 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo) case INTEL_865G: dinfo->output[i].type = INTELFB_OUTPUT_DVO; intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].ddc_bus, - GPIOD, "DVODDC_D"); + GPIOD, "DVODDC_D", I2C_CLASS_DDC); intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus, - GPIOE, "DVOI2C_E"); + GPIOE, "DVOI2C_E", 0); i++; break; case INTEL_915G: @@ -174,7 +176,7 @@ void intelfb_create_i2c_busses(struct intelfb_info *dinfo) /* SDVO ports have a single control bus - 2 devices */ dinfo->output[i].type = INTELFB_OUTPUT_SDVO; intelfb_setup_i2c_bus(dinfo, &dinfo->output[i].i2c_bus, - GPIOE, "SDVOCTRL_E"); + GPIOE, "SDVOCTRL_E", 0); /* TODO: initialize the SDVO */ /* I830SDVOInit(pScrn, i, DVOB); */ i++; diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/matrox/i2c-matroxfb.c index 4baab7be58de..75ee5a12e549 100644 --- a/drivers/video/matrox/i2c-matroxfb.c +++ b/drivers/video/matrox/i2c-matroxfb.c @@ -104,7 +104,9 @@ static struct i2c_algo_bit_data matrox_i2c_algo_template = }; static int i2c_bus_reg(struct i2c_bit_adapter* b, struct matrox_fb_info* minfo, - unsigned int data, unsigned int clock, const char* name) { + unsigned int data, unsigned int clock, const char *name, + int class) +{ int err; b->minfo = minfo; @@ -114,6 +116,7 @@ static int i2c_bus_reg(struct i2c_bit_adapter* b, struct matrox_fb_info* minfo, snprintf(b->adapter.name, sizeof(b->adapter.name), name, minfo->fbcon.node); i2c_set_adapdata(&b->adapter, b); + b->adapter.class = class; b->adapter.algo_data = &b->bac; b->adapter.dev.parent = &ACCESS_FBINFO(pcidev)->dev; b->bac = matrox_i2c_algo_template; @@ -159,22 +162,29 @@ static void* i2c_matroxfb_probe(struct matrox_fb_info* minfo) { switch (ACCESS_FBINFO(chip)) { case MGA_2064: case MGA_2164: - err = i2c_bus_reg(&m2info->ddc1, minfo, DDC1B_DATA, DDC1B_CLK, "DDC:fb%u #0"); + err = i2c_bus_reg(&m2info->ddc1, minfo, + DDC1B_DATA, DDC1B_CLK, + "DDC:fb%u #0", I2C_CLASS_DDC); break; default: - err = i2c_bus_reg(&m2info->ddc1, minfo, DDC1_DATA, DDC1_CLK, "DDC:fb%u #0"); + err = i2c_bus_reg(&m2info->ddc1, minfo, + DDC1_DATA, DDC1_CLK, + "DDC:fb%u #0", I2C_CLASS_DDC); break; } if (err) goto fail_ddc1; if (ACCESS_FBINFO(devflags.dualhead)) { - err = i2c_bus_reg(&m2info->ddc2, minfo, DDC2_DATA, DDC2_CLK, "DDC:fb%u #1"); + err = i2c_bus_reg(&m2info->ddc2, minfo, + DDC2_DATA, DDC2_CLK, + "DDC:fb%u #1", I2C_CLASS_DDC); if (err == -ENODEV) { printk(KERN_INFO "i2c-matroxfb: VGA->TV plug detected, DDC unavailable.\n"); } else if (err) printk(KERN_INFO "i2c-matroxfb: Could not register secondary output i2c bus. Continuing anyway.\n"); /* Register maven bus even on G450/G550 */ - err = i2c_bus_reg(&m2info->maven, minfo, MAT_DATA, MAT_CLK, "MAVEN:fb%u"); + err = i2c_bus_reg(&m2info->maven, minfo, + MAT_DATA, MAT_CLK, "MAVEN:fb%u", 0); if (err) printk(KERN_INFO "i2c-matroxfb: Could not register Maven i2c bus. Continuing anyway.\n"); } diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 7c36d5188d39..145797fe6a31 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -349,7 +349,7 @@ static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data) #define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */ #define I2C_CLASS_TV_ANALOG (1<<1) /* bttv + friends */ #define I2C_CLASS_TV_DIGITAL (1<<2) /* dvb cards */ -#define I2C_CLASS_DDC (1<<3) /* i2c-matroxfb ? */ +#define I2C_CLASS_DDC (1<<3) /* DDC bus on graphics adapters */ #define I2C_CLASS_CAM_ANALOG (1<<4) /* camera with analog CCD */ #define I2C_CLASS_CAM_DIGITAL (1<<5) /* most webcams */ #define I2C_CLASS_SOUND (1<<6) /* sound devices */ -- cgit v1.2.3 From 3401b2fff38fbb8b73ea6bcc69a8370ae5d2a7a0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:29 +0200 Subject: i2c: Let bus drivers add SPD to their class Let general purpose I2C/SMBus bus drivers add SPD to their class. Once this is done, we will be able to tell the eeprom driver to only probe for SPD EEPROMs and similar on these buses. Note that I took a conservative approach here, adding I2C_CLASS_SPD to many drivers that have no idea whether they can host SPD EEPROMs or not. This is to make sure that the eeprom driver doesn't stop probing buses where SPD EEPROMs or equivalent live. So, bus driver maintainers and users should feel free to remove the SPD class from drivers those buses never have SPD EEPROMs or they don't want the eeprom driver to bind to them. Likewise, feel free to add the SPD class to any bus driver I might have missed. Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-ali1535.c | 2 +- drivers/i2c/busses/i2c-ali1563.c | 2 +- drivers/i2c/busses/i2c-ali15x3.c | 2 +- drivers/i2c/busses/i2c-amd756.c | 2 +- drivers/i2c/busses/i2c-amd8111.c | 2 +- drivers/i2c/busses/i2c-cpm.c | 2 +- drivers/i2c/busses/i2c-elektor.c | 2 +- drivers/i2c/busses/i2c-gpio.c | 2 +- drivers/i2c/busses/i2c-i801.c | 2 +- drivers/i2c/busses/i2c-ibm_iic.c | 4 ++-- drivers/i2c/busses/i2c-iop3xx.c | 2 +- drivers/i2c/busses/i2c-isch.c | 2 +- drivers/i2c/busses/i2c-mpc.c | 2 +- drivers/i2c/busses/i2c-mv64xxx.c | 2 +- drivers/i2c/busses/i2c-nforce2.c | 2 +- drivers/i2c/busses/i2c-ocores.c | 2 +- drivers/i2c/busses/i2c-pasemi.c | 2 +- drivers/i2c/busses/i2c-piix4.c | 2 +- drivers/i2c/busses/i2c-pmcmsp.c | 2 +- drivers/i2c/busses/i2c-s3c2410.c | 2 +- drivers/i2c/busses/i2c-sibyte.c | 4 ++-- drivers/i2c/busses/i2c-sis5595.c | 2 +- drivers/i2c/busses/i2c-sis630.c | 2 +- drivers/i2c/busses/i2c-sis96x.c | 2 +- drivers/i2c/busses/i2c-stub.c | 2 +- drivers/i2c/busses/i2c-via.c | 2 +- drivers/i2c/busses/i2c-viapro.c | 2 +- drivers/i2c/busses/scx200_acb.c | 2 +- include/linux/i2c.h | 1 + 29 files changed, 31 insertions(+), 30 deletions(-) diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 704436cdec8e..8d1d90ab3a90 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -473,7 +473,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali1535_adapter = { .owner = THIS_MODULE, .id = I2C_HW_SMBUS_ALI1535, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index da5a382eee93..4b55ae19db8d 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -382,7 +382,7 @@ static const struct i2c_algorithm ali1563_algorithm = { static struct i2c_adapter ali1563_adapter = { .owner = THIS_MODULE, .id = I2C_HW_SMBUS_ALI1563, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &ali1563_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 7b029b147a8e..e922c3950fcd 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -471,7 +471,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali15x3_adapter = { .owner = THIS_MODULE, .id = I2C_HW_SMBUS_ALI15X3, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index f0baea62067d..bd4f6380fabe 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -301,7 +301,7 @@ static const struct i2c_algorithm smbus_algorithm = { struct i2c_adapter amd756_smbus = { .owner = THIS_MODULE, .id = I2C_HW_SMBUS_AMD756, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index a4f687915de1..0e18fe846010 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -383,7 +383,7 @@ static int __devinit amd8111_probe(struct pci_dev *dev, snprintf(smbus->adapter.name, sizeof(smbus->adapter.name), "SMBus2 AMD8111 adapter at %04x", smbus->base); smbus->adapter.id = I2C_HW_SMBUS_AMD8111; - smbus->adapter.class = I2C_CLASS_HWMON; + smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 53af744a91c1..8164de1f4d72 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -423,7 +423,7 @@ static const struct i2c_adapter cpm_ops = { .owner = THIS_MODULE, .name = "i2c-cpm", .algo = &cpm_i2c_algo, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, }; static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index b7a9977b025f..c251cf21a62b 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -202,7 +202,7 @@ static struct i2c_algo_pcf_data pcf_isa_data = { static struct i2c_adapter pcf_isa_ops = { .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .id = I2C_HW_P_ELEK, .algo_data = &pcf_isa_data, .name = "i2c-elektor", diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 7c1b762aa681..79b455a1f090 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -140,7 +140,7 @@ static int __init i2c_gpio_probe(struct platform_device *pdev) adap->owner = THIS_MODULE; snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id); adap->algo_data = bit_data; - adap->class = I2C_CLASS_HWMON; + adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->dev.parent = &pdev->dev; /* diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 213119211e58..9717ffe12921 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -573,7 +573,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter i801_adapter = { .owner = THIS_MODULE, .id = I2C_HW_SMBUS_I801, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 85dbf34382e1..6f7bfdec3c69 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -740,7 +740,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){ strcpy(adap->name, "IBM IIC"); i2c_set_adapdata(adap, dev); adap->id = I2C_HW_OCP; - adap->class = I2C_CLASS_HWMON; + adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->algo = &iic_algo; adap->client_register = NULL; adap->client_unregister = NULL; @@ -934,7 +934,7 @@ static int __devinit iic_probe(struct of_device *ofdev, strlcpy(adap->name, "IBM IIC", sizeof(adap->name)); i2c_set_adapdata(adap, dev); adap->id = I2C_HW_OCP; - adap->class = I2C_CLASS_HWMON; + adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->algo = &iic_algo; adap->timeout = 1; adap->nr = dev->idx; diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 39884e797594..fc2714ac0c0f 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -482,7 +482,7 @@ iop3xx_i2c_probe(struct platform_device *pdev) memcpy(new_adapter->name, pdev->name, strlen(pdev->name)); new_adapter->id = I2C_HW_IOP3XX; new_adapter->owner = THIS_MODULE; - new_adapter->class = I2C_CLASS_HWMON; + new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; new_adapter->dev.parent = &pdev->dev; new_adapter->nr = pdev->id; diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c index c9cd46b22692..8d648911a7f5 100644 --- a/drivers/i2c/busses/i2c-isch.c +++ b/drivers/i2c/busses/i2c-isch.c @@ -251,7 +251,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sch_adapter = { .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index a076129de7e8..10b9342a36c2 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -311,7 +311,7 @@ static struct i2c_adapter mpc_ops = { .name = "MPC adapter", .id = I2C_HW_MPC107, .algo = &mpc_algo, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .timeout = 1, }; diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 036e6a883e67..9e8118d2fe64 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -530,7 +530,7 @@ mv64xxx_i2c_probe(struct platform_device *pd) drv_data->adapter.id = I2C_HW_MV64XXX; drv_data->adapter.algo = &mv64xxx_i2c_algo; drv_data->adapter.owner = THIS_MODULE; - drv_data->adapter.class = I2C_CLASS_HWMON; + drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; drv_data->adapter.timeout = pdata->timeout; drv_data->adapter.nr = pd->id; platform_set_drvdata(pd, drv_data); diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 081fdf3393f4..2654f20d3a62 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -350,7 +350,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, } smbus->adapter.owner = THIS_MODULE; smbus->adapter.id = I2C_HW_SMBUS_NFORCE2; - smbus->adapter.class = I2C_CLASS_HWMON; + smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; smbus->adapter.dev.parent = &dev->dev; diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index f145692cbb76..51ca79bf6480 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -205,7 +205,7 @@ static const struct i2c_algorithm ocores_algorithm = { static struct i2c_adapter ocores_adapter = { .owner = THIS_MODULE, .name = "i2c-ocores", - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &ocores_algorithm, }; diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c index 1603c81e39d4..adf0fbb902f0 100644 --- a/drivers/i2c/busses/i2c-pasemi.c +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -365,7 +365,7 @@ static int __devinit pasemi_smb_probe(struct pci_dev *dev, smbus->adapter.owner = THIS_MODULE; snprintf(smbus->adapter.name, sizeof(smbus->adapter.name), "PA Semi SMBus adapter at 0x%lx", smbus->base); - smbus->adapter.class = I2C_CLASS_HWMON; + smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; smbus->adapter.nr = PCI_FUNC(dev->devfn); diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 2bde47509e1a..85d69f3e624f 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -402,7 +402,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter piix4_adapter = { .owner = THIS_MODULE, .id = I2C_HW_SMBUS_PIIX4, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c index 63b3e2c11cff..dcf2045b5222 100644 --- a/drivers/i2c/busses/i2c-pmcmsp.c +++ b/drivers/i2c/busses/i2c-pmcmsp.c @@ -622,7 +622,7 @@ static struct i2c_algorithm pmcmsptwi_algo = { static struct i2c_adapter pmcmsptwi_adapter = { .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &pmcmsptwi_algo, .name = DRV_NAME, }; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 9e8c875437be..007390ad9810 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -590,7 +590,7 @@ static struct s3c24xx_i2c s3c24xx_i2c = { .owner = THIS_MODULE, .algo = &s3c24xx_i2c_algorithm, .retries = 2, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, }, }; diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c index 114634da6c6e..ac8822e7a5b4 100644 --- a/drivers/i2c/busses/i2c-sibyte.c +++ b/drivers/i2c/busses/i2c-sibyte.c @@ -156,7 +156,7 @@ static struct i2c_adapter sibyte_board_adapter[2] = { { .owner = THIS_MODULE, .id = I2C_HW_SIBYTE, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = NULL, .algo_data = &sibyte_board_data[0], .name = "SiByte SMBus 0", @@ -164,7 +164,7 @@ static struct i2c_adapter sibyte_board_adapter[2] = { { .owner = THIS_MODULE, .id = I2C_HW_SIBYTE, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = NULL, .algo_data = &sibyte_board_data[1], .name = "SiByte SMBus 1", diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 328441bb5470..f76944b384f5 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -362,7 +362,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis5595_adapter = { .owner = THIS_MODULE, .id = I2C_HW_SMBUS_SIS5595, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index d7e6ff3e0187..eb2b2181fed7 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -462,7 +462,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis630_adapter = { .owner = THIS_MODULE, .id = I2C_HW_SMBUS_SIS630, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index cde8e5880368..413e9e477723 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -244,7 +244,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis96x_adapter = { .owner = THIS_MODULE, .id = I2C_HW_SMBUS_SIS96X, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c index e37ccd80f77a..1b7b2af94036 100644 --- a/drivers/i2c/busses/i2c-stub.c +++ b/drivers/i2c/busses/i2c-stub.c @@ -140,7 +140,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter stub_adapter = { .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, .name = "SMBus stub driver", }; diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 61716f6b14dc..6517f8a6d911 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -87,7 +87,7 @@ static struct i2c_algo_bit_data bit_data = { static struct i2c_adapter vt586b_adapter = { .owner = THIS_MODULE, .id = I2C_HW_B_VIA, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .name = "VIA i2c", .algo_data = &bit_data, }; diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index c611905df009..7957ce515891 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -311,7 +311,7 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter vt596_adapter = { .owner = THIS_MODULE, .id = I2C_HW_SMBUS_VIA2, - .class = I2C_CLASS_HWMON, + .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index 61abe0f33255..ed794b145a11 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -442,7 +442,7 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text, adapter->owner = THIS_MODULE; adapter->id = I2C_HW_SMBUS_SCX200; adapter->algo = &scx200_acb_algorithm; - adapter->class = I2C_CLASS_HWMON; + adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adapter->dev.parent = dev; mutex_init(&iface->mutex); diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 145797fe6a31..839d0ea3dca3 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -353,6 +353,7 @@ static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data) #define I2C_CLASS_CAM_ANALOG (1<<4) /* camera with analog CCD */ #define I2C_CLASS_CAM_DIGITAL (1<<5) /* most webcams */ #define I2C_CLASS_SOUND (1<<6) /* sound devices */ +#define I2C_CLASS_SPD (1<<7) /* SPD EEPROMs and similar */ #define I2C_CLASS_ALL (UINT_MAX) /* all of the above */ /* i2c_client_address_data is the struct for holding default client -- cgit v1.2.3 From d4653bf946a5856a17342cd47c47d10b16b1cc22 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:29 +0200 Subject: i2c/eeprom: Only probe buses with DDC or SPD class The eeprom driver shouldn't probe i2c buses which don't want to be probed. Signed-off-by: Jean Delvare --- drivers/i2c/chips/eeprom.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index 7dee001e5133..213a9f98decc 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -159,6 +159,8 @@ static struct bin_attribute eeprom_attr = { static int eeprom_attach_adapter(struct i2c_adapter *adapter) { + if (!(adapter->class & (I2C_CLASS_DDC | I2C_CLASS_SPD))) + return 0; return i2c_probe(adapter, &addr_data, eeprom_detect); } @@ -169,6 +171,12 @@ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) struct eeprom_data *data; int err = 0; + /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all + addresses 0x50-0x57, but we only care about 0x50. So decline + attaching to addresses >= 0x51 on DDC buses */ + if (!(adapter->class & I2C_CLASS_SPD) && address >= 0x51) + goto exit; + /* There are three ways we can read the EEPROM data: (1) I2C block reads (faster, but unsupported by most adapters) (2) Consecutive byte reads (100% overhead) -- cgit v1.2.3 From 1b4dff9cd37d430bc76112396e92bb3552f37ccd Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:29 +0200 Subject: i2c/eeprom: Fall back to SMBus read word transactions When I2C block reads are not supported by the underlying adapter, use SMBus read word transactions instead of consecutive byte reads. Reasons for this change are: * The consecutive byte read approach is not safe on multi-master buses. * While consecutive byte reads have less overhead if you only count the bytes on the bus, it takes more than twice as many transactions as with SMBus read word transactions, and each transaction has a cost: taking and releasing the adapter mutex, and for polling drivers, waiting for the transaction to complete. This change yields a significant performance boost at HZ=250 with EEPROMs on an Intel 82801 bus (basically twice as fast.) SMBus read word transactions are widely supported so I don't expect compatibility issues. Signed-off-by: Jean Delvare --- drivers/i2c/chips/eeprom.c | 39 +++++++++++++++++++-------------------- 1 file changed, 19 insertions(+), 20 deletions(-) diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index 213a9f98decc..9a81252a7218 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -78,7 +78,7 @@ static struct i2c_driver eeprom_driver = { static void eeprom_update_client(struct i2c_client *client, u8 slice) { struct eeprom_data *data = i2c_get_clientdata(client); - int i, j; + int i; mutex_lock(&data->update_lock); @@ -93,15 +93,12 @@ static void eeprom_update_client(struct i2c_client *client, u8 slice) != 32) goto exit; } else { - if (i2c_smbus_write_byte(client, slice << 5)) { - dev_dbg(&client->dev, "eeprom read start has failed!\n"); - goto exit; - } - for (i = slice << 5; i < (slice + 1) << 5; i++) { - j = i2c_smbus_read_byte(client); - if (j < 0) + for (i = slice << 5; i < (slice + 1) << 5; i += 2) { + int word = i2c_smbus_read_word_data(client, i); + if (word < 0) goto exit; - data->data[i] = (u8) j; + data->data[i] = word & 0xff; + data->data[i + 1] = word >> 8; } } data->last_updated[slice] = jiffies; @@ -177,14 +174,15 @@ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) if (!(adapter->class & I2C_CLASS_SPD) && address >= 0x51) goto exit; - /* There are three ways we can read the EEPROM data: + /* There are four ways we can read the EEPROM data: (1) I2C block reads (faster, but unsupported by most adapters) - (2) Consecutive byte reads (100% overhead) - (3) Regular byte data reads (200% overhead) - The third method is not implemented by this driver because all - known adapters support at least the second. */ - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA - | I2C_FUNC_SMBUS_BYTE)) + (2) Word reads (128% overhead) + (3) Consecutive byte reads (88% overhead, unsafe) + (4) Regular byte data reads (265% overhead) + The third and fourth methods are not implemented by this driver + because all known adapters support one of the first two. */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA) + && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) goto exit; if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { @@ -212,13 +210,14 @@ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) /* Detect the Vaio nature of EEPROMs. We use the "PCG-" or "VGN-" prefix as the signature. */ - if (address == 0x57) { + if (address == 0x57 + && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) { char name[4]; name[0] = i2c_smbus_read_byte_data(new_client, 0x80); - name[1] = i2c_smbus_read_byte(new_client); - name[2] = i2c_smbus_read_byte(new_client); - name[3] = i2c_smbus_read_byte(new_client); + name[1] = i2c_smbus_read_byte_data(new_client, 0x81); + name[2] = i2c_smbus_read_byte_data(new_client, 0x82); + name[3] = i2c_smbus_read_byte_data(new_client, 0x83); if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) { dev_info(&new_client->dev, "Vaio EEPROM detected, " -- cgit v1.2.3 From e0457442fd522107204da14a2dc2cbbb5dcac5f6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:30 +0200 Subject: i2c: Simplify i2c_device_probe i2c_driver.id_table is mandatory now, so we can simplify i2c_device_probe() a bit. Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index e06067ebd205..d6cc58abf3ff 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -101,19 +101,14 @@ static int i2c_device_probe(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct i2c_driver *driver = to_i2c_driver(dev->driver); - const struct i2c_device_id *id; int status; - if (!driver->probe) + if (!driver->probe || !driver->id_table) return -ENODEV; client->driver = driver; dev_dbg(dev, "probe\n"); - if (driver->id_table) - id = i2c_match_id(driver->id_table, client); - else - id = NULL; - status = driver->probe(client, id); + status = driver->probe(client, i2c_match_id(driver->id_table, client)); if (status) client->driver = NULL; return status; -- cgit v1.2.3 From e6c3de6c146d2513332c581433caca6e5cae62bf Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 14 Jul 2008 22:38:30 +0200 Subject: i2c-ibm_iic: Remove deprecated OCP style part The deprecated OCP style driver part is used by the "old" arch/ppc platform. This platform is scheduled for removal in June/July this year. This patch now removes the OCP driver part from the IBM I2C driver. Signed-off-by: Stefan Roese Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-ibm_iic.c | 181 --------------------------------------- 1 file changed, 181 deletions(-) diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 6f7bfdec3c69..d8a19c110564 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -42,13 +42,7 @@ #include #include #include - -#ifdef CONFIG_IBM_OCP -#include -#include -#else #include -#endif #include "i2c-ibm_iic.h" @@ -665,180 +659,6 @@ static inline u8 iic_clckdiv(unsigned int opb) return (u8)((opb + 9) / 10 - 1); } -#ifdef CONFIG_IBM_OCP -/* - * Register single IIC interface - */ -static int __devinit iic_probe(struct ocp_device *ocp){ - - struct ibm_iic_private* dev; - struct i2c_adapter* adap; - struct ocp_func_iic_data* iic_data = ocp->def->additions; - int ret; - - if (!iic_data) - printk(KERN_WARNING"ibm-iic%d: missing additional data!\n", - ocp->def->index); - - if (!(dev = kzalloc(sizeof(*dev), GFP_KERNEL))) { - printk(KERN_ERR "ibm-iic%d: failed to allocate device data\n", - ocp->def->index); - return -ENOMEM; - } - - dev->idx = ocp->def->index; - ocp_set_drvdata(ocp, dev); - - if (!request_mem_region(ocp->def->paddr, sizeof(struct iic_regs), - "ibm_iic")) { - ret = -EBUSY; - goto fail1; - } - - if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){ - printk(KERN_ERR "ibm-iic%d: failed to ioremap device registers\n", - dev->idx); - ret = -ENXIO; - goto fail2; - } - - init_waitqueue_head(&dev->wq); - - dev->irq = iic_force_poll ? -1 : ocp->def->irq; - if (dev->irq >= 0){ - /* Disable interrupts until we finish initialization, - assumes level-sensitive IRQ setup... - */ - iic_interrupt_mode(dev, 0); - if (request_irq(dev->irq, iic_handler, 0, "IBM IIC", dev)){ - printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n", - dev->idx, dev->irq); - /* Fallback to the polling mode */ - dev->irq = -1; - } - } - - if (dev->irq < 0) - printk(KERN_WARNING "ibm-iic%d: using polling mode\n", - dev->idx); - - /* Board specific settings */ - dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0); - - /* clckdiv is the same for *all* IIC interfaces, - * but I'd rather make a copy than introduce another global. --ebs - */ - dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq); - DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv); - - /* Initialize IIC interface */ - iic_dev_init(dev); - - /* Register it with i2c layer */ - adap = &dev->adap; - adap->dev.parent = &ocp->dev; - strcpy(adap->name, "IBM IIC"); - i2c_set_adapdata(adap, dev); - adap->id = I2C_HW_OCP; - adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; - adap->algo = &iic_algo; - adap->client_register = NULL; - adap->client_unregister = NULL; - adap->timeout = 1; - - /* - * If "dev->idx" is negative we consider it as zero. - * The reason to do so is to avoid sysfs names that only make - * sense when there are multiple adapters. - */ - adap->nr = dev->idx >= 0 ? dev->idx : 0; - - if ((ret = i2c_add_numbered_adapter(adap)) < 0) { - printk(KERN_ERR "ibm-iic%d: failed to register i2c adapter\n", - dev->idx); - goto fail; - } - - printk(KERN_INFO "ibm-iic%d: using %s mode\n", dev->idx, - dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)"); - - return 0; - -fail: - if (dev->irq >= 0){ - iic_interrupt_mode(dev, 0); - free_irq(dev->irq, dev); - } - - iounmap(dev->vaddr); -fail2: - release_mem_region(ocp->def->paddr, sizeof(struct iic_regs)); -fail1: - ocp_set_drvdata(ocp, NULL); - kfree(dev); - return ret; -} - -/* - * Cleanup initialized IIC interface - */ -static void __devexit iic_remove(struct ocp_device *ocp) -{ - struct ibm_iic_private* dev = (struct ibm_iic_private*)ocp_get_drvdata(ocp); - BUG_ON(dev == NULL); - if (i2c_del_adapter(&dev->adap)){ - printk(KERN_ERR "ibm-iic%d: failed to delete i2c adapter :(\n", - dev->idx); - /* That's *very* bad, just shutdown IRQ ... */ - if (dev->irq >= 0){ - iic_interrupt_mode(dev, 0); - free_irq(dev->irq, dev); - dev->irq = -1; - } - } else { - if (dev->irq >= 0){ - iic_interrupt_mode(dev, 0); - free_irq(dev->irq, dev); - } - iounmap(dev->vaddr); - release_mem_region(ocp->def->paddr, sizeof(struct iic_regs)); - kfree(dev); - } -} - -static struct ocp_device_id ibm_iic_ids[] __devinitdata = -{ - { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC }, - { .vendor = OCP_VENDOR_INVALID } -}; - -MODULE_DEVICE_TABLE(ocp, ibm_iic_ids); - -static struct ocp_driver ibm_iic_driver = -{ - .name = "iic", - .id_table = ibm_iic_ids, - .probe = iic_probe, - .remove = __devexit_p(iic_remove), -#if defined(CONFIG_PM) - .suspend = NULL, - .resume = NULL, -#endif -}; - -static int __init iic_init(void) -{ - printk(KERN_INFO "IBM IIC driver v" DRIVER_VERSION "\n"); - return ocp_register_driver(&ibm_iic_driver); -} - -static void __exit iic_exit(void) -{ - ocp_unregister_driver(&ibm_iic_driver); -} - -#else /* !CONFIG_IBM_OCP */ - static int __devinit iic_request_irq(struct of_device *ofdev, struct ibm_iic_private *dev) { @@ -1011,7 +831,6 @@ static void __exit iic_exit(void) { of_unregister_platform_driver(&ibm_iic_driver); } -#endif /* CONFIG_IBM_OCP */ module_init(iic_init); module_exit(iic_exit); -- cgit v1.2.3 From d3dc685eb5ef64aa695dabb74f00440ec3ab6796 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 14 Jul 2008 22:38:30 +0200 Subject: i2c-ibm_iic: Enable driver for all PPC4xx variants in arch/powerpc Enable the IBM I2C driver for all PPC4xx variants by adding "ibm,iic" to the compatible list. This way all currently available arch/powerpc 4xx ports can make use of this driver without any changes. Additionally all "other" compatible entries are removed since they are not needed anymore. Currently all 4xx PPC's have the same compatible I2C macro. If at some time an incompatibility is detected we can take care of this with an additional property. Signed-off-by: Stefan Roese Acked-by: Josh Boyer Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-ibm_iic.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index d8a19c110564..070f078b5f5c 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -807,11 +807,7 @@ static int __devexit iic_remove(struct of_device *ofdev) } static const struct of_device_id ibm_iic_match[] = { - { .compatible = "ibm,iic-405ex", }, - { .compatible = "ibm,iic-405gp", }, - { .compatible = "ibm,iic-440gp", }, - { .compatible = "ibm,iic-440gpx", }, - { .compatible = "ibm,iic-440grx", }, + { .compatible = "ibm,iic", }, {} }; -- cgit v1.2.3 From 47a9b1379a5ebc8b00ba8635d1d3885fc0d51739 Mon Sep 17 00:00:00 2001 From: Uli Luckas Date: Mon, 14 Jul 2008 22:38:30 +0200 Subject: i2c-pxa: Initialize early Initialize the pxa i2c bus during subsystem initialization to make it available during driver initialization (e.g. display powerup for pxafb). Signed-off-by: Uli Luckas Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-pxa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index eb69fbadc9cb..78c0fc42bc73 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1134,5 +1134,5 @@ static void __exit i2c_adap_pxa_exit(void) MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:pxa2xx-i2c"); -module_init(i2c_adap_pxa_init); +subsys_initcall(i2c_adap_pxa_init); module_exit(i2c_adap_pxa_exit); -- cgit v1.2.3 From 8a56ce1033073657572bd993595a56498baa4800 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 14 Jul 2008 22:38:31 +0200 Subject: i2c: Deprecate the legacy gpio drivers The legacy pcf8574 and pcf8575 drivers should be avoided on systems using the new gpiolib code, and generally deprecated in the same way the legacy pca9539 driver is deprecated. Also, correct the pca9539 deprecation to match the current name of the preferred driver: pca953x, supporting several more chips. Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- drivers/i2c/chips/Kconfig | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 2da2edfa68ec..6326468d5f0b 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -26,8 +26,8 @@ config SENSORS_EEPROM will be called eeprom. config SENSORS_PCF8574 - tristate "Philips PCF8574 and PCF8574A" - depends on EXPERIMENTAL + tristate "Philips PCF8574 and PCF8574A (DEPRECATED)" + depends on EXPERIMENTAL && GPIO_PCF857X = "n" default n help If you say yes here you get support for Philips PCF8574 and @@ -36,12 +36,16 @@ config SENSORS_PCF8574 This driver can also be built as a module. If so, the module will be called pcf8574. + This driver is deprecated and will be dropped soon. Use + drivers/gpio/pcf857x.c instead. + These devices are hard to detect and rarely found on mainstream hardware. If unsure, say N. config PCF8575 - tristate "Philips PCF8575" + tristate "Philips PCF8575 (DEPRECATED)" default n + depends on GPIO_PCF857X = "n" help If you say yes here you get support for Philips PCF8575 chip. This chip is a 16-bit I/O expander for the I2C bus. Several other @@ -50,12 +54,15 @@ config PCF8575 This driver can also be built as a module. If so, the module will be called pcf8575. + This driver is deprecated and will be dropped soon. Use + drivers/gpio/pcf857x.c instead. + This device is hard to detect and is rarely found on mainstream hardware. If unsure, say N. config SENSORS_PCA9539 tristate "Philips PCA9539 16-bit I/O port (DEPRECATED)" - depends on EXPERIMENTAL && GPIO_PCA9539 = "n" + depends on EXPERIMENTAL && GPIO_PCA953X = "n" help If you say yes here you get support for the Philips PCA9539 16-bit I/O port. @@ -64,7 +71,7 @@ config SENSORS_PCA9539 will be called pca9539. This driver is deprecated and will be dropped soon. Use - drivers/gpio/pca9539.c instead. + drivers/gpio/pca953x.c instead. config SENSORS_PCF8591 tristate "Philips PCF8591" -- cgit v1.2.3 From 0573d11b2bbd0e4774f33f4c1959c1939c055e96 Mon Sep 17 00:00:00 2001 From: Eric Brower Date: Mon, 14 Jul 2008 22:38:31 +0200 Subject: i2c-algo-pcf: Multi-master lost-arbitration improvement Improve lost-arbitration handling of PCF8584. This is necessary for support of a currently out-of-kernel driver for Sun Microsystems E250 environmental management; perhaps others. Signed-off-by: Eric Brower Acked-by: Dan Smolik Signed-off-by: Jean Delvare --- drivers/i2c/algos/i2c-algo-pcf.c | 48 ++++++++++++++++++++++++++-------------- include/linux/i2c-algo-pcf.h | 6 +++++ 2 files changed, 37 insertions(+), 17 deletions(-) diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 8907b0191677..1e328d19cd6d 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -78,6 +78,36 @@ static void i2c_stop(struct i2c_algo_pcf_data *adap) set_pcf(adap, 1, I2C_PCF_STOP); } +static void handle_lab(struct i2c_algo_pcf_data *adap, const int *status) +{ + DEB2(printk(KERN_INFO + "i2c-algo-pcf.o: lost arbitration (CSR 0x%02x)\n", + *status)); + + /* Cleanup from LAB -- reset and enable ESO. + * This resets the PCF8584; since we've lost the bus, no + * further attempts should be made by callers to clean up + * (no i2c_stop() etc.) + */ + set_pcf(adap, 1, I2C_PCF_PIN); + set_pcf(adap, 1, I2C_PCF_ESO); + + /* We pause for a time period sufficient for any running + * I2C transaction to complete -- the arbitration logic won't + * work properly until the next START is seen. + * It is assumed the bus driver or client has set a proper value. + * + * REVISIT: should probably use msleep instead of mdelay if we + * know we can sleep. + */ + if (adap->lab_mdelay) + mdelay(adap->lab_mdelay); + + DEB2(printk(KERN_INFO + "i2c-algo-pcf.o: reset LAB condition (CSR 0x%02x)\n", + get_pcf(adap, 1))); +} + static int wait_for_bb(struct i2c_algo_pcf_data *adap) { int timeout = DEF_TIMEOUT; @@ -109,23 +139,7 @@ static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) { *status = get_pcf(adap, 1); } if (*status & I2C_PCF_LAB) { - DEB2(printk(KERN_INFO - "i2c-algo-pcf.o: lost arbitration (CSR 0x%02x)\n", - *status)); - /* Cleanup from LAB-- reset and enable ESO. - * This resets the PCF8584; since we've lost the bus, no - * further attempts should be made by callers to clean up - * (no i2c_stop() etc.) - */ - set_pcf(adap, 1, I2C_PCF_PIN); - set_pcf(adap, 1, I2C_PCF_ESO); - /* TODO: we should pause for a time period sufficient for any - * running I2C transaction to complete-- the arbitration - * logic won't work properly until the next START is seen. - */ - DEB2(printk(KERN_INFO - "i2c-algo-pcf.o: reset LAB condition (CSR 0x%02x)\n", - get_pcf(adap,1))); + handle_lab(adap, status); return(-EINTR); } #endif diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 77afbb60fd11..74fb6f889a77 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -36,6 +36,12 @@ struct i2c_algo_pcf_data { /* local settings */ int udelay; int timeout; + + /* Multi-master lost arbitration back-off delay (msecs) + * This should be set by the bus adapter or knowledgable client + * if bus is multi-mastered, else zero + */ + unsigned long lab_mdelay; }; int i2c_pcf_add_bus(struct i2c_adapter *); -- cgit v1.2.3 From e3e7fc3c401a5d53f0599a357b3cf65d6a4f52e3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:31 +0200 Subject: i2c-algo-pcf: Drop unused struct members Struct members udelay and timeout aren't used anywhere, so drop them. Signed-off-by: Jean Delvare Acked-by: Eric Brower --- drivers/i2c/busses/i2c-elektor.c | 2 -- include/linux/i2c-algo-pcf.h | 4 ---- 2 files changed, 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index c251cf21a62b..7f38c01fb3a0 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -196,8 +196,6 @@ static struct i2c_algo_pcf_data pcf_isa_data = { .getown = pcf_isa_getown, .getclock = pcf_isa_getclock, .waitforpin = pcf_isa_waitforpin, - .udelay = 10, - .timeout = 100, }; static struct i2c_adapter pcf_isa_ops = { diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 74fb6f889a77..0177d280f733 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -33,10 +33,6 @@ struct i2c_algo_pcf_data { int (*getclock) (void *data); void (*waitforpin) (void); - /* local settings */ - int udelay; - int timeout; - /* Multi-master lost arbitration back-off delay (msecs) * This should be set by the bus adapter or knowledgable client * if bus is multi-mastered, else zero -- cgit v1.2.3 From 90df2cb1c8822ef8d06a2b30627e7a810218b0dd Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:32 +0200 Subject: i2c-i801: Remove verbose debugging messages Dumping the register values before and after every transaction was useful during driver development but now it's only spamming the log. Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-i801.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 9717ffe12921..965905fb5d56 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -138,11 +138,6 @@ static int i801_transaction(int xact) int result = 0; int timeout = 0; - dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), - inb_p(SMBHSTDAT1)); - /* Make sure the SMBus host is ready to start transmitting */ /* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */ if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { @@ -202,10 +197,6 @@ static int i801_transaction(int xact) dev_dbg(&I801_dev->dev, "Failed reset at end of transaction " "(%02x)\n", temp); } - dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), - inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), - inb_p(SMBHSTDAT1)); return result; } @@ -293,11 +284,6 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, } outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT); - dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i, - inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), - inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT)); - /* Make sure the SMBus host is ready to start transmitting */ temp = inb_p(SMBHSTSTS); if (i == 1) { @@ -381,10 +367,6 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, "Bad status (%02x) at end of transaction\n", temp); } - dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, " - "ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i, - inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), - inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT)); if (result < 0) return result; -- cgit v1.2.3 From dcb5c9239de8d3ff1c663e75f0f1c75bcb21ee20 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:32 +0200 Subject: i2c-i801: Properly report bus arbitration loss Bit BUS_ERR of the status register means that the ICH host controller lost the arbitration. Report this event as such. Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-i801.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 965905fb5d56..614c9e4ffba3 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -179,10 +179,8 @@ static int i801_transaction(int xact) } if (temp & SMBHSTSTS_BUS_ERR) { - result = -EIO; - dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked " - "until next hard reset. (sorry!)\n"); - /* Clock stops and slave is stuck in mid-transmission */ + result = -EAGAIN; + dev_dbg(&I801_dev->dev, "Lost arbitration\n"); } if (temp & SMBHSTSTS_DEV_ERR) { @@ -339,8 +337,8 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n"); } else if (temp & SMBHSTSTS_BUS_ERR) { - result = -EIO; - dev_err(&I801_dev->dev, "Bus collision!\n"); + result = -EAGAIN; + dev_dbg(&I801_dev->dev, "Lost arbitration\n"); } else if (temp & SMBHSTSTS_DEV_ERR) { result = -ENXIO; dev_dbg(&I801_dev->dev, "Error: no response!\n"); -- cgit v1.2.3 From 2b73809d06649fe6c7f4294b051ca4934a34bb91 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:32 +0200 Subject: i2c-i801: Rename local variable temp to status "temp" isn't a terribly well chosen name for a local variable. Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-i801.c | 66 +++++++++++++++++++++---------------------- 1 file changed, 33 insertions(+), 33 deletions(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 614c9e4ffba3..73bd8552734c 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -134,18 +134,18 @@ static unsigned int i801_features; static int i801_transaction(int xact) { - int temp; + int status; int result = 0; int timeout = 0; /* Make sure the SMBus host is ready to start transmitting */ /* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */ - if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { + if ((status = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting...\n", - temp); - outb_p(temp, SMBHSTSTS); - if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { - dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp); + status); + outb_p(status, SMBHSTSTS); + if ((status = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { + dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", status); return -EBUSY; } else { dev_dbg(&I801_dev->dev, "Successful!\n"); @@ -159,8 +159,8 @@ static int i801_transaction(int xact) /* We will always wait for a fraction of a second! */ do { msleep(1); - temp = inb_p(SMBHSTSTS); - } while ((temp & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT)); + status = inb_p(SMBHSTSTS); + } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ if (timeout >= MAX_TIMEOUT) { @@ -173,17 +173,17 @@ static int i801_transaction(int xact) outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT); } - if (temp & SMBHSTSTS_FAILED) { + if (status & SMBHSTSTS_FAILED) { result = -EIO; dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n"); } - if (temp & SMBHSTSTS_BUS_ERR) { + if (status & SMBHSTSTS_BUS_ERR) { result = -EAGAIN; dev_dbg(&I801_dev->dev, "Lost arbitration\n"); } - if (temp & SMBHSTSTS_DEV_ERR) { + if (status & SMBHSTSTS_DEV_ERR) { result = -ENXIO; dev_dbg(&I801_dev->dev, "Error: no response!\n"); } @@ -191,9 +191,9 @@ static int i801_transaction(int xact) if ((inb_p(SMBHSTSTS) & 0x1f) != 0x00) outb_p(inb(SMBHSTSTS), SMBHSTSTS); - if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { + if ((status = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { dev_dbg(&I801_dev->dev, "Failed reset at end of transaction " - "(%02x)\n", temp); + "(%02x)\n", status); } return result; } @@ -202,18 +202,18 @@ static int i801_transaction(int xact) static void i801_wait_hwpec(void) { int timeout = 0; - int temp; + int status; do { msleep(1); - temp = inb_p(SMBHSTSTS); - } while ((!(temp & SMBHSTSTS_INTR)) + status = inb_p(SMBHSTSTS); + } while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_TIMEOUT)); if (timeout >= MAX_TIMEOUT) { dev_dbg(&I801_dev->dev, "PEC Timeout!\n"); } - outb_p(temp, SMBHSTSTS); + outb_p(status, SMBHSTSTS); } static int i801_block_transaction_by_block(union i2c_smbus_data *data, @@ -255,7 +255,7 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, { int i, len; int smbcmd; - int temp; + int status; int result = 0; int timeout; unsigned char errmask; @@ -283,7 +283,7 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT); /* Make sure the SMBus host is ready to start transmitting */ - temp = inb_p(SMBHSTSTS); + status = inb_p(SMBHSTSTS); if (i == 1) { /* Erroneous conditions before transaction: * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */ @@ -293,13 +293,13 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, * Failed, Bus_Err, Dev_Err, Intr */ errmask = 0x1e; } - if (temp & errmask) { + if (status & errmask) { dev_dbg(&I801_dev->dev, "SMBus busy (%02x). " - "Resetting...\n", temp); - outb_p(temp, SMBHSTSTS); - if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) { + "Resetting...\n", status); + outb_p(status, SMBHSTSTS); + if (((status = inb_p(SMBHSTSTS)) & errmask) != 0x00) { dev_err(&I801_dev->dev, - "Reset failed! (%02x)\n", temp); + "Reset failed! (%02x)\n", status); return -EBUSY; } if (i != 1) @@ -314,9 +314,9 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, timeout = 0; do { msleep(1); - temp = inb_p(SMBHSTSTS); + status = inb_p(SMBHSTSTS); } - while ((!(temp & SMBHSTSTS_BYTE_DONE)) + while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ @@ -332,14 +332,14 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, dev_dbg(&I801_dev->dev, "SMBus Timeout!\n"); } - if (temp & SMBHSTSTS_FAILED) { + if (status & SMBHSTSTS_FAILED) { result = -EIO; dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n"); - } else if (temp & SMBHSTSTS_BUS_ERR) { + } else if (status & SMBHSTSTS_BUS_ERR) { result = -EAGAIN; dev_dbg(&I801_dev->dev, "Lost arbitration\n"); - } else if (temp & SMBHSTSTS_DEV_ERR) { + } else if (status & SMBHSTSTS_DEV_ERR) { result = -ENXIO; dev_dbg(&I801_dev->dev, "Error: no response!\n"); } @@ -357,13 +357,13 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, data->block[i] = inb_p(SMBBLKDAT); if (read_write == I2C_SMBUS_WRITE && i+1 <= len) outb_p(data->block[i+1], SMBBLKDAT); - if ((temp & 0x9e) != 0x00) - outb_p(temp, SMBHSTSTS); /* signals SMBBLKDAT ready */ + if ((status & 0x9e) != 0x00) + outb_p(status, SMBHSTSTS); /* signals SMBBLKDAT ready */ - if ((temp = (0x1e & inb_p(SMBHSTSTS))) != 0x00) { + if ((status = (0x1e & inb_p(SMBHSTSTS))) != 0x00) { dev_dbg(&I801_dev->dev, "Bad status (%02x) at end of transaction\n", - temp); + status); } if (result < 0) -- cgit v1.2.3 From cf898dc5e9dfd1487b28ca0176b68722f05d4d48 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:33 +0200 Subject: i2c-i801: Fix handling of error conditions Move the check of pre-transaction and post-transaction conditions to separate functions, and adjust them a bit. Having dedicated functions for that ensures that errors are handled in a consistent way. Bit HOST_BUSY of the status register is read-only, so writing to it is certainly not going to clear it. If this bit is set then we simply don't want to start the transaction, as it means that somebody else (ACPI, SMM?) is already using the controller. Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-i801.c | 200 +++++++++++++++++++++--------------------- 1 file changed, 102 insertions(+), 98 deletions(-) diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 73bd8552734c..46aa41f73fdd 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -4,7 +4,7 @@ Copyright (c) 1998 - 2002 Frodo Looijaard , Philip Edelbrock , and Mark D. Studebaker - Copyright (C) 2007 Jean Delvare + Copyright (C) 2007, 2008 Jean Delvare This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -121,6 +121,10 @@ #define SMBHSTSTS_INTR 0x02 #define SMBHSTSTS_HOST_BUSY 0x01 +#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \ + SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | \ + SMBHSTSTS_INTR) + static unsigned long i801_smba; static unsigned char i801_original_hstcfg; static struct pci_driver i801_driver; @@ -132,72 +136,114 @@ static struct pci_dev *I801_dev; #define FEATURE_I2C_BLOCK_READ (1 << 3) static unsigned int i801_features; -static int i801_transaction(int xact) +/* Make sure the SMBus host is ready to start transmitting. + Return 0 if it is, -EBUSY if it is not. */ +static int i801_check_pre(void) { int status; - int result = 0; - int timeout = 0; - /* Make sure the SMBus host is ready to start transmitting */ - /* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */ - if ((status = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { - dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting...\n", + status = inb_p(SMBHSTSTS); + if (status & SMBHSTSTS_HOST_BUSY) { + dev_err(&I801_dev->dev, "SMBus is busy, can't use it!\n"); + return -EBUSY; + } + + status &= STATUS_FLAGS; + if (status) { + dev_dbg(&I801_dev->dev, "Clearing status flags (%02x)\n", status); outb_p(status, SMBHSTSTS); - if ((status = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { - dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", status); + status = inb_p(SMBHSTSTS) & STATUS_FLAGS; + if (status) { + dev_err(&I801_dev->dev, + "Failed clearing status flags (%02x)\n", + status); return -EBUSY; - } else { - dev_dbg(&I801_dev->dev, "Successful!\n"); } } - /* the current contents of SMBHSTCNT can be overwritten, since PEC, - * INTREN, SMBSCMD are passed in xact */ - outb_p(xact | I801_START, SMBHSTCNT); + return 0; +} - /* We will always wait for a fraction of a second! */ - do { - msleep(1); - status = inb_p(SMBHSTSTS); - } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT)); +/* Convert the status register to an error code, and clear it. */ +static int i801_check_post(int status, int timeout) +{ + int result = 0; /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { - dev_dbg(&I801_dev->dev, "SMBus Timeout!\n"); - result = -ETIMEDOUT; + if (timeout) { + dev_err(&I801_dev->dev, "Transaction timeout\n"); /* try to stop the current command */ dev_dbg(&I801_dev->dev, "Terminating the current operation\n"); outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT); msleep(1); outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT); + + /* Check if it worked */ + status = inb_p(SMBHSTSTS); + if ((status & SMBHSTSTS_HOST_BUSY) || + !(status & SMBHSTSTS_FAILED)) + dev_err(&I801_dev->dev, + "Failed terminating the transaction\n"); + outb_p(STATUS_FLAGS, SMBHSTSTS); + return -ETIMEDOUT; } if (status & SMBHSTSTS_FAILED) { result = -EIO; - dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n"); + dev_err(&I801_dev->dev, "Transaction failed\n"); + } + if (status & SMBHSTSTS_DEV_ERR) { + result = -ENXIO; + dev_dbg(&I801_dev->dev, "No response\n"); } - if (status & SMBHSTSTS_BUS_ERR) { result = -EAGAIN; dev_dbg(&I801_dev->dev, "Lost arbitration\n"); } - if (status & SMBHSTSTS_DEV_ERR) { - result = -ENXIO; - dev_dbg(&I801_dev->dev, "Error: no response!\n"); + if (result) { + /* Clear error flags */ + outb_p(status & STATUS_FLAGS, SMBHSTSTS); + status = inb_p(SMBHSTSTS) & STATUS_FLAGS; + if (status) { + dev_warn(&I801_dev->dev, "Failed clearing status " + "flags at end of transaction (%02x)\n", + status); + } } - if ((inb_p(SMBHSTSTS) & 0x1f) != 0x00) - outb_p(inb(SMBHSTSTS), SMBHSTSTS); - - if ((status = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { - dev_dbg(&I801_dev->dev, "Failed reset at end of transaction " - "(%02x)\n", status); - } return result; } +static int i801_transaction(int xact) +{ + int status; + int result; + int timeout = 0; + + result = i801_check_pre(); + if (result < 0) + return result; + + /* the current contents of SMBHSTCNT can be overwritten, since PEC, + * INTREN, SMBSCMD are passed in xact */ + outb_p(xact | I801_START, SMBHSTCNT); + + /* We will always wait for a fraction of a second! */ + do { + msleep(1); + status = inb_p(SMBHSTSTS); + } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT)); + + result = i801_check_post(status, timeout >= MAX_TIMEOUT); + if (result < 0) + return result; + + outb_p(SMBHSTSTS_INTR, SMBHSTSTS); + return 0; +} + /* wait for INTR bit as advised by Intel */ static void i801_wait_hwpec(void) { @@ -256,9 +302,12 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, int i, len; int smbcmd; int status; - int result = 0; + int result; int timeout; - unsigned char errmask; + + result = i801_check_pre(); + if (result < 0) + return result; len = data->block[0]; @@ -282,31 +331,6 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, } outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT); - /* Make sure the SMBus host is ready to start transmitting */ - status = inb_p(SMBHSTSTS); - if (i == 1) { - /* Erroneous conditions before transaction: - * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */ - errmask = 0x9f; - } else { - /* Erroneous conditions during transaction: - * Failed, Bus_Err, Dev_Err, Intr */ - errmask = 0x1e; - } - if (status & errmask) { - dev_dbg(&I801_dev->dev, "SMBus busy (%02x). " - "Resetting...\n", status); - outb_p(status, SMBHSTSTS); - if (((status = inb_p(SMBHSTSTS)) & errmask) != 0x00) { - dev_err(&I801_dev->dev, - "Reset failed! (%02x)\n", status); - return -EBUSY; - } - if (i != 1) - /* if die in middle of block transaction, fail */ - return -EIO; - } - if (i == 1) outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT); @@ -319,36 +343,23 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_TIMEOUT)); - /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { - /* try to stop the current command */ - dev_dbg(&I801_dev->dev, "Terminating the current " - "operation\n"); - outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT); - msleep(1); - outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), - SMBHSTCNT); - result = -ETIMEDOUT; - dev_dbg(&I801_dev->dev, "SMBus Timeout!\n"); - } - - if (status & SMBHSTSTS_FAILED) { - result = -EIO; - dev_dbg(&I801_dev->dev, - "Error: Failed bus transaction\n"); - } else if (status & SMBHSTSTS_BUS_ERR) { - result = -EAGAIN; - dev_dbg(&I801_dev->dev, "Lost arbitration\n"); - } else if (status & SMBHSTSTS_DEV_ERR) { - result = -ENXIO; - dev_dbg(&I801_dev->dev, "Error: no response!\n"); - } + result = i801_check_post(status, timeout >= MAX_TIMEOUT); + if (result < 0) + return result; if (i == 1 && read_write == I2C_SMBUS_READ && command != I2C_SMBUS_I2C_BLOCK_DATA) { len = inb_p(SMBHSTDAT0); - if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) + if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) { + dev_err(&I801_dev->dev, + "Illegal SMBus block read size %d\n", + len); + /* Recover */ + while (inb_p(SMBHSTSTS) & SMBHSTSTS_HOST_BUSY) + outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS); + outb_p(SMBHSTSTS_INTR, SMBHSTSTS); return -EPROTO; + } data->block[0] = len; } @@ -357,19 +368,12 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, data->block[i] = inb_p(SMBBLKDAT); if (read_write == I2C_SMBUS_WRITE && i+1 <= len) outb_p(data->block[i+1], SMBBLKDAT); - if ((status & 0x9e) != 0x00) - outb_p(status, SMBHSTSTS); /* signals SMBBLKDAT ready */ - if ((status = (0x1e & inb_p(SMBHSTSTS))) != 0x00) { - dev_dbg(&I801_dev->dev, - "Bad status (%02x) at end of transaction\n", - status); - } - - if (result < 0) - return result; + /* signals SMBBLKDAT ready */ + outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS); } - return result; + + return 0; } static int i801_set_block_buffer_mode(void) -- cgit v1.2.3 From 392a0408fdc4c9069c32a9a02b0088eae76c4618 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 14 Jul 2008 22:38:33 +0200 Subject: i2c-sibyte: SWARM I2C board initialization The standard rtc-m41t80.c driver cannot be used with the SWARM as it is, because the board does not provide setup information for the I2C core. As a result the bus and the address to probe for the M41T80 chip is not known. Here is a set of changes that fix the problem: 1. swarm-i2c.c -- SWARM I2C board setup, currently for the M41T80 chip on the bus #1 only (there is a MAX6654 temperature sensor on the bus #0 which may be added in the future if we have a driver for that chip). 2. The i2c-sibyte.c BCM1250A SMBus controller driver now registers its buses as numbered so that board setup is correctly applied. Signed-off-by: Maciej W. Rozycki Signed-off-by: Jean Delvare --- arch/mips/sibyte/swarm/Makefile | 1 + arch/mips/sibyte/swarm/swarm-i2c.c | 37 +++++++++++++++++++++++++++++++++++++ drivers/i2c/busses/i2c-sibyte.c | 4 +++- 3 files changed, 41 insertions(+), 1 deletion(-) create mode 100644 arch/mips/sibyte/swarm/swarm-i2c.c diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile index 1775755a2619..255d692bfa18 100644 --- a/arch/mips/sibyte/swarm/Makefile +++ b/arch/mips/sibyte/swarm/Makefile @@ -1,3 +1,4 @@ obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o +obj-$(CONFIG_I2C_BOARDINFO) += swarm-i2c.o obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/sibyte/swarm/swarm-i2c.c b/arch/mips/sibyte/swarm/swarm-i2c.c new file mode 100644 index 000000000000..4282ac9d01d2 --- /dev/null +++ b/arch/mips/sibyte/swarm/swarm-i2c.c @@ -0,0 +1,37 @@ +/* + * arch/mips/sibyte/swarm/swarm-i2c.c + * + * Broadcom BCM91250A (SWARM), etc. I2C platform setup. + * + * Copyright (c) 2008 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include + + +static struct i2c_board_info swarm_i2c_info1[] __initdata = { + { + I2C_BOARD_INFO("m41t81", 0x68), + }, +}; + +static int __init swarm_i2c_init(void) +{ + int err; + + err = i2c_register_board_info(1, swarm_i2c_info1, + ARRAY_SIZE(swarm_i2c_info1)); + if (err < 0) + printk(KERN_ERR + "swarm-i2c: cannot register board I2C devices\n"); + return err; +} + +arch_initcall(swarm_i2c_init); diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c index ac8822e7a5b4..4ddefbf238e9 100644 --- a/drivers/i2c/busses/i2c-sibyte.c +++ b/drivers/i2c/busses/i2c-sibyte.c @@ -143,7 +143,7 @@ static int __init i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed) csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ)); csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL)); - return i2c_add_adapter(i2c_adap); + return i2c_add_numbered_adapter(i2c_adap); } @@ -159,6 +159,7 @@ static struct i2c_adapter sibyte_board_adapter[2] = { .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = NULL, .algo_data = &sibyte_board_data[0], + .nr = 0, .name = "SiByte SMBus 0", }, { @@ -167,6 +168,7 @@ static struct i2c_adapter sibyte_board_adapter[2] = { .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = NULL, .algo_data = &sibyte_board_data[1], + .nr = 1, .name = "SiByte SMBus 1", }, }; -- cgit v1.2.3 From 2373c1801afd06d3a206376902b39a98458c9cfb Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Mon, 14 Jul 2008 22:38:33 +0200 Subject: i2c-ocores: basic PM support Basic PM support: reinit the core on resume, disable it on suspend. Signed-off-by: Manuel Lauss Acked-by: Peter Korsgaard Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-ocores.c | 42 ++++++++++++++++++++++++++++++++++------- 1 file changed, 35 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 51ca79bf6480..e5193bf75483 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -29,6 +29,7 @@ struct ocores_i2c { int pos; int nmsgs; int state; /* see STATE_ */ + int clock_khz; }; /* registers */ @@ -173,8 +174,7 @@ static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) return -ETIMEDOUT; } -static void ocores_init(struct ocores_i2c *i2c, - struct ocores_i2c_platform_data *pdata) +static void ocores_init(struct ocores_i2c *i2c) { int prescale; u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); @@ -182,7 +182,7 @@ static void ocores_init(struct ocores_i2c *i2c, /* make sure the device is disabled */ oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN)); - prescale = (pdata->clock_khz / (5*100)) - 1; + prescale = (i2c->clock_khz / (5*100)) - 1; oc_setreg(i2c, OCI2C_PRELOW, prescale & 0xff); oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8); @@ -248,7 +248,8 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev) } i2c->regstep = pdata->regstep; - ocores_init(i2c, pdata); + i2c->clock_khz = pdata->clock_khz; + ocores_init(i2c); init_waitqueue_head(&i2c->wait); ret = request_irq(res2->start, ocores_isr, 0, pdev->name, i2c); @@ -312,13 +313,40 @@ static int __devexit ocores_i2c_remove(struct platform_device* pdev) return 0; } +#ifdef CONFIG_PM +static int ocores_i2c_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct ocores_i2c *i2c = platform_get_drvdata(pdev); + u8 ctrl = oc_getreg(i2c, OCI2C_CONTROL); + + /* make sure the device is disabled */ + oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN)); + + return 0; +} + +static int ocores_i2c_resume(struct platform_device *pdev) +{ + struct ocores_i2c *i2c = platform_get_drvdata(pdev); + + ocores_init(i2c); + + return 0; +} +#else +#define ocores_i2c_suspend NULL +#define ocores_i2c_resume NULL +#endif + /* work with hotplug and coldplug */ MODULE_ALIAS("platform:ocores-i2c"); static struct platform_driver ocores_i2c_driver = { - .probe = ocores_i2c_probe, - .remove = __devexit_p(ocores_i2c_remove), - .driver = { + .probe = ocores_i2c_probe, + .remove = __devexit_p(ocores_i2c_remove), + .suspend = ocores_i2c_suspend, + .resume = ocores_i2c_resume, + .driver = { .owner = THIS_MODULE, .name = "ocores-i2c", }, -- cgit v1.2.3 From 54fb4a05af0a4b814e6716cfdf3fa97fc6be7a32 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:33 +0200 Subject: i2c: Check for ACPI resource conflicts Check for ACPI resource conflicts in i2c bus drivers. I've included all recent SMBus master drivers for PC hardware. I've voluntarily left out: * Drivers that don't run on PCs: they can't conflict with ACPI. * Bit-banged bus device drivers: it's very unlikely that ACPI would deal with such buses. Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-ali1535.c | 6 ++++++ drivers/i2c/busses/i2c-ali1563.c | 5 +++++ drivers/i2c/busses/i2c-ali15x3.c | 5 +++++ drivers/i2c/busses/i2c-amd756.c | 6 ++++++ drivers/i2c/busses/i2c-amd8111.c | 5 +++++ drivers/i2c/busses/i2c-i801.c | 5 +++++ drivers/i2c/busses/i2c-isch.c | 3 +++ drivers/i2c/busses/i2c-nforce2.c | 6 ++++++ drivers/i2c/busses/i2c-piix4.c | 4 ++++ drivers/i2c/busses/i2c-sis5595.c | 6 ++++++ drivers/i2c/busses/i2c-sis630.c | 6 ++++++ drivers/i2c/busses/i2c-sis96x.c | 5 +++++ drivers/i2c/busses/i2c-viapro.c | 5 +++++ 13 files changed, 67 insertions(+) diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 8d1d90ab3a90..442d559b1aa9 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -61,6 +61,7 @@ #include #include #include +#include #include @@ -159,6 +160,11 @@ static int ali1535_setup(struct pci_dev *dev) goto exit; } + retval = acpi_check_region(ali1535_smba, ALI1535_SMB_IOSIZE, + ali1535_driver.name); + if (retval) + goto exit; + if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, ali1535_driver.name)) { dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n", diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 4b55ae19db8d..fc3e5b026423 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -21,6 +21,7 @@ #include #include #include +#include #define ALI1563_MAX_TIMEOUT 500 #define ALI1563_SMBBA 0x80 @@ -356,6 +357,10 @@ static int __devinit ali1563_setup(struct pci_dev * dev) } } + if (acpi_check_region(ali1563_smba, ALI1563_SMB_IOSIZE, + ali1563_pci_driver.name)) + goto Err; + if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE, ali1563_pci_driver.name)) { dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n", diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index e922c3950fcd..a030abd3b32b 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -68,6 +68,7 @@ #include #include #include +#include #include /* ALI15X3 SMBus address offsets */ @@ -166,6 +167,10 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev) if(force_addr) ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1); + if (acpi_check_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, + ali15x3_driver.name)) + return -EBUSY; + if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, ali15x3_driver.name)) { dev_err(&ALI15X3_dev->dev, diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index bd4f6380fabe..26acc657e5c9 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -45,6 +45,7 @@ #include #include #include +#include #include /* AMD756 SMBus address offsets */ @@ -368,6 +369,11 @@ static int __devinit amd756_probe(struct pci_dev *pdev, amd756_ioport += SMB_ADDR_OFFSET; } + error = acpi_check_region(amd756_ioport, SMB_IOSIZE, + amd756_driver.name); + if (error) + return error; + if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) { dev_err(&pdev->dev, "SMB region 0x%x already in use!\n", amd756_ioport); diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 0e18fe846010..3972208876b3 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -16,6 +16,7 @@ #include #include #include +#include #include MODULE_LICENSE("GPL"); @@ -374,6 +375,10 @@ static int __devinit amd8111_probe(struct pci_dev *dev, smbus->base = pci_resource_start(dev, 0); smbus->size = pci_resource_len(dev, 0); + error = acpi_check_resource_conflict(&dev->resource[0]); + if (error) + goto out_kfree; + if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) { error = -EBUSY; goto out_kfree; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 46aa41f73fdd..8d0bc4bfe154 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -64,6 +64,7 @@ #include #include #include +#include #include /* I801 SMBus address offsets */ @@ -624,6 +625,10 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id goto exit; } + err = acpi_check_resource_conflict(&dev->resource[SMBBAR]); + if (err) + goto exit; + err = pci_request_region(dev, SMBBAR, i801_driver.name); if (err) { dev_err(&dev->dev, "Failed to request SMBus region " diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c index 8d648911a7f5..b9c01aa90036 100644 --- a/drivers/i2c/busses/i2c-isch.c +++ b/drivers/i2c/busses/i2c-isch.c @@ -35,6 +35,7 @@ #include #include #include +#include /* SCH SMBus address offsets */ #define SMBHSTCNT (0 + sch_smba) @@ -279,6 +280,8 @@ static int __devinit sch_probe(struct pci_dev *dev, dev_err(&dev->dev, "SMBus base address uninitialized!\n"); return -ENODEV; } + if (acpi_check_region(sch_smba, SMBIOSIZE, sch_driver.name)) + return -EBUSY; if (!request_region(sch_smba, SMBIOSIZE, sch_driver.name)) { dev_err(&dev->dev, "SMBus region 0x%x already in use!\n", sch_smba); diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 2654f20d3a62..3b19bc41a60b 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -51,6 +51,7 @@ #include #include #include +#include #include MODULE_LICENSE("GPL"); @@ -343,6 +344,11 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, smbus->size = 64; } + error = acpi_check_region(smbus->base, smbus->size, + nforce2_driver.name); + if (error) + return -1; + if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) { dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n", smbus->base, smbus->base+smbus->size-1, name); diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 85d69f3e624f..924e84a53488 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -39,6 +39,7 @@ #include #include #include +#include #include @@ -168,6 +169,9 @@ static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, } } + if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) + return -EBUSY; + if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", piix4_smba); diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index f76944b384f5..3c8e0e1bd24f 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -62,6 +62,7 @@ #include #include #include +#include #include static int blacklist[] = { @@ -174,6 +175,11 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev) /* NB: We grab just the two SMBus registers here, but this may still * interfere with ACPI :-( */ + retval = acpi_check_region(sis5595_base + SMB_INDEX, 2, + sis5595_driver.name); + if (retval) + return retval; + if (!request_region(sis5595_base + SMB_INDEX, 2, sis5595_driver.name)) { dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n", diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index eb2b2181fed7..72c29a650b22 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -55,6 +55,7 @@ #include #include #include +#include #include /* SIS630 SMBus registers */ @@ -437,6 +438,11 @@ static int sis630_setup(struct pci_dev *sis630_dev) dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base); + retval = acpi_check_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, + sis630_driver.name); + if (retval) + goto exit; + /* Everything is happy, let's grab the memory and set things up. */ if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, sis630_driver.name)) { diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 413e9e477723..848b37c97f7f 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -40,6 +40,7 @@ #include #include #include +#include #include /* base address register in PCI config space */ @@ -281,6 +282,10 @@ static int __devinit sis96x_probe(struct pci_dev *dev, dev_info(&dev->dev, "SiS96x SMBus base address: 0x%04x\n", sis96x_smbus_base); + retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]); + if (retval) + return retval; + /* Everything is happy, let's grab the memory and set things up. */ if (!request_region(sis96x_smbus_base, SMB_IOSIZE, sis96x_driver.name)) { diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 7957ce515891..faef99560f23 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -50,6 +50,7 @@ #include #include #include +#include #include static struct pci_dev *vt596_pdev; @@ -356,6 +357,10 @@ static int __devinit vt596_probe(struct pci_dev *pdev, } found: + error = acpi_check_region(vt596_smba, 8, vt596_driver.name); + if (error) + return error; + if (!request_region(vt596_smba, 8, vt596_driver.name)) { dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n", vt596_smba); -- cgit v1.2.3 From 954a99307f256f1badd751a2e128c09af235c317 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:34 +0200 Subject: i2c: Drop stray references to lm_sensors Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-ali1535.c | 2 -- drivers/i2c/busses/i2c-ali15x3.c | 2 -- drivers/i2c/busses/i2c-amd756.c | 3 --- drivers/i2c/busses/i2c-hydra.c | 3 --- drivers/i2c/busses/i2c-i801.c | 2 -- drivers/i2c/busses/i2c-piix4.c | 2 -- drivers/i2c/busses/i2c-sis5595.c | 2 -- drivers/i2c/busses/i2c-sis630.c | 3 --- drivers/i2c/busses/i2c-sis96x.c | 3 --- drivers/i2c/busses/i2c-via.c | 3 --- drivers/i2c/busses/i2c-viapro.c | 2 -- drivers/i2c/busses/i2c-voodoo3.c | 2 -- drivers/i2c/chips/eeprom.c | 8 +------- drivers/i2c/chips/pcf8574.c | 2 -- drivers/i2c/chips/pcf8591.c | 2 -- 15 files changed, 1 insertion(+), 40 deletions(-) diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 442d559b1aa9..9cead9b9458e 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -1,6 +1,4 @@ /* - i2c-ali1535.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring Copyright (c) 2000 Frodo Looijaard , Philip Edelbrock , Mark D. Studebaker , diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index a030abd3b32b..234fdde7d40e 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -1,6 +1,4 @@ /* - ali15x3.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring Copyright (c) 1999 Frodo Looijaard and Philip Edelbrock and Mark D. Studebaker diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 26acc657e5c9..1ea39254dac6 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -1,7 +1,4 @@ /* - amd756.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 1999-2002 Merlin Hughes Shamelessly ripped from i2c-piix4.c: diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index f9972f9651e4..1098f21ace13 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -1,7 +1,4 @@ /* - i2c-hydra.c - Part of lm_sensors, Linux kernel modules - for hardware monitoring - i2c Support for the Apple `Hydra' Mac I/O Copyright (c) 1999-2004 Geert Uytterhoeven diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 8d0bc4bfe154..dc7ea32b69a8 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1,6 +1,4 @@ /* - i2c-i801.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring Copyright (c) 1998 - 2002 Frodo Looijaard , Philip Edelbrock , and Mark D. Studebaker diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 924e84a53488..eaa9b387543e 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -1,6 +1,4 @@ /* - piix4.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring Copyright (c) 1998 - 2002 Frodo Looijaard and Philip Edelbrock diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 3c8e0e1bd24f..dfc2d5eb6a68 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -1,6 +1,4 @@ /* - sis5595.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring Copyright (c) 1998, 1999 Frodo Looijaard and Philip Edelbrock diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 72c29a650b22..e7c4b790da54 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -1,7 +1,4 @@ /* - i2c-sis630.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 2002,2003 Alexander Malysh This program is free software; you can redistribute it and/or modify diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 848b37c97f7f..f1bba6396641 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -1,7 +1,4 @@ /* - sis96x.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 2003 Mark M. Hoffman This program is free software; you can redistribute it and/or modify diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 6517f8a6d911..29cef0433f34 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -1,7 +1,4 @@ /* - i2c-via.c - Part of lm_sensors, Linux kernel modules - for hardware monitoring - i2c Support for Via Technologies 82C586B South Bridge Copyright (c) 1998, 1999 Kyösti Mälkki diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index faef99560f23..862eb352a2d9 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -1,6 +1,4 @@ /* - i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring Copyright (c) 1998 - 2002 Frodo Looijaard , Philip Edelbrock , Kyösti Mälkki , Mark D. Studebaker diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c index 88a3447e11e1..1d4ae26ba73d 100644 --- a/drivers/i2c/busses/i2c-voodoo3.c +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -1,6 +1,4 @@ /* - voodoo3.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring Copyright (c) 1998, 1999 Frodo Looijaard , Philip Edelbrock , Ralph Metzler , and diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index 9a81252a7218..e22ec3b3aedf 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -1,15 +1,9 @@ /* - eeprom.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring Copyright (C) 1998, 1999 Frodo Looijaard and Philip Edelbrock Copyright (C) 2003 Greg Kroah-Hartman Copyright (C) 2003 IBM Corp. - - 2004-01-16 Jean Delvare - Divide the eeprom in 32-byte (arbitrary) slices. This significantly - speeds sensors up, as well as various scripts using the eeprom - module. + Copyright (C) 2004 Jean Delvare This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c index e5b31329b56e..ad2f7901a8c9 100644 --- a/drivers/i2c/chips/pcf8574.c +++ b/drivers/i2c/chips/pcf8574.c @@ -1,6 +1,4 @@ /* - pcf8574.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring Copyright (c) 2000 Frodo Looijaard , Philip Edelbrock , Dan Eaton diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c index 66c7c3bb9429..d3a24524817a 100644 --- a/drivers/i2c/chips/pcf8591.c +++ b/drivers/i2c/chips/pcf8591.c @@ -1,6 +1,4 @@ /* - pcf8591.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring Copyright (C) 2001-2004 Aurelien Jarno Ported to Linux 2.6 by Aurelien Jarno with the help of Jean Delvare -- cgit v1.2.3 From f6a7110520037ba786f17b53790c6eb8a3d4ef55 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:34 +0200 Subject: i2c-dev: Delete empty detach_client callback Implementing detach_client is optional, so there is no point in an empty implementation. Likewise, i2c driver IDs are optional, and we don't need one. Signed-off-by: Jean Delvare --- drivers/i2c/i2c-dev.c | 7 ------- include/linux/i2c-id.h | 2 -- 2 files changed, 9 deletions(-) diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index e96d98696782..50df53640c78 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -548,19 +548,12 @@ static int i2cdev_detach_adapter(struct i2c_adapter *adap) return 0; } -static int i2cdev_detach_client(struct i2c_client *client) -{ - return 0; -} - static struct i2c_driver i2cdev_driver = { .driver = { .name = "dev_driver", }, - .id = I2C_DRIVERID_I2CDEV, .attach_adapter = i2cdev_attach_adapter, .detach_adapter = i2cdev_detach_adapter, - .detach_client = i2cdev_detach_client, }; /* ------------------------------------------------------------------------- */ diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 988e566d3ed5..ef13b7c66df3 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -91,8 +91,6 @@ #define I2C_DRIVERID_M52790 95 /* Mitsubishi M52790SP/FP AV switch */ #define I2C_DRIVERID_CS5345 96 /* cs5345 audio processor */ -#define I2C_DRIVERID_I2CDEV 900 - #define I2C_DRIVERID_OV7670 1048 /* Omnivision 7670 camera */ /* -- cgit v1.2.3 From f09f71b24e77a2f2b4e5c98311c8804fc61ad8bc Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Mon, 14 Jul 2008 22:38:34 +0200 Subject: i2c-au1550: Fix PM support Fix driver power management: - suspend the PSC while driver is idle. - move PSC init/deinit to separate functions, as PSC must be initialized/shutdown on resume/suspend. Signed-off-by: Manuel Lauss Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-au1550.c | 130 +++++++++++++++++++++++----------------- 1 file changed, 75 insertions(+), 55 deletions(-) diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c index cae9dc89d88c..66a04c2c660f 100644 --- a/drivers/i2c/busses/i2c-au1550.c +++ b/drivers/i2c/busses/i2c-au1550.c @@ -269,9 +269,13 @@ static int au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) { struct i2c_au1550_data *adap = i2c_adap->algo_data; + volatile psc_smb_t *sp = (volatile psc_smb_t *)adap->psc_base; struct i2c_msg *p; int i, err = 0; + sp->psc_ctrl = PSC_CTRL_ENABLE; + au_sync(); + for (i = 0; !err && i < num; i++) { p = &msgs[i]; err = do_address(adap, p->addr, p->flags & I2C_M_RD, @@ -288,6 +292,10 @@ au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) */ if (err == 0) err = num; + + sp->psc_ctrl = PSC_CTRL_SUSPEND; + au_sync(); + return err; } @@ -302,6 +310,61 @@ static const struct i2c_algorithm au1550_algo = { .functionality = au1550_func, }; +static void i2c_au1550_setup(struct i2c_au1550_data *priv) +{ + volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base; + u32 stat; + + sp->psc_ctrl = PSC_CTRL_DISABLE; + au_sync(); + sp->psc_sel = PSC_SEL_PS_SMBUSMODE; + sp->psc_smbcfg = 0; + au_sync(); + sp->psc_ctrl = PSC_CTRL_ENABLE; + au_sync(); + do { + stat = sp->psc_smbstat; + au_sync(); + } while ((stat & PSC_SMBSTAT_SR) == 0); + + sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 | + PSC_SMBCFG_DD_DISABLE); + + /* Divide by 8 to get a 6.25 MHz clock. The later protocol + * timings are based on this clock. + */ + sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8); + sp->psc_smbmsk = PSC_SMBMSK_ALLMASK; + au_sync(); + + /* Set the protocol timer values. See Table 71 in the + * Au1550 Data Book for standard timing values. + */ + sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \ + PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \ + PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \ + PSC_SMBTMR_SET_CH(15); + au_sync(); + + sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE; + do { + stat = sp->psc_smbstat; + au_sync(); + } while ((stat & PSC_SMBSTAT_SR) == 0); + + sp->psc_ctrl = PSC_CTRL_SUSPEND; + au_sync(); +} + +static void i2c_au1550_disable(struct i2c_au1550_data *priv) +{ + volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base; + + sp->psc_smbcfg = 0; + sp->psc_ctrl = PSC_CTRL_DISABLE; + au_sync(); +} + /* * registering functions to load algorithms at runtime * Prior to calling us, the 50MHz clock frequency and routing @@ -311,9 +374,7 @@ static int __devinit i2c_au1550_probe(struct platform_device *pdev) { struct i2c_au1550_data *priv; - volatile psc_smb_t *sp; struct resource *r; - u32 stat; int ret; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -348,43 +409,7 @@ i2c_au1550_probe(struct platform_device *pdev) /* Now, set up the PSC for SMBus PIO mode. */ - sp = (volatile psc_smb_t *)priv->psc_base; - sp->psc_ctrl = PSC_CTRL_DISABLE; - au_sync(); - sp->psc_sel = PSC_SEL_PS_SMBUSMODE; - sp->psc_smbcfg = 0; - au_sync(); - sp->psc_ctrl = PSC_CTRL_ENABLE; - au_sync(); - do { - stat = sp->psc_smbstat; - au_sync(); - } while ((stat & PSC_SMBSTAT_SR) == 0); - - sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 | - PSC_SMBCFG_DD_DISABLE); - - /* Divide by 8 to get a 6.25 MHz clock. The later protocol - * timings are based on this clock. - */ - sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8); - sp->psc_smbmsk = PSC_SMBMSK_ALLMASK; - au_sync(); - - /* Set the protocol timer values. See Table 71 in the - * Au1550 Data Book for standard timing values. - */ - sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \ - PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \ - PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \ - PSC_SMBTMR_SET_CH(15); - au_sync(); - - sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE; - do { - stat = sp->psc_smbstat; - au_sync(); - } while ((stat & PSC_SMBSTAT_DR) == 0); + i2c_au1550_setup(priv); ret = i2c_add_numbered_adapter(&priv->adap); if (ret == 0) { @@ -392,10 +417,7 @@ i2c_au1550_probe(struct platform_device *pdev) return 0; } - /* disable the PSC */ - sp->psc_smbcfg = 0; - sp->psc_ctrl = PSC_CTRL_DISABLE; - au_sync(); + i2c_au1550_disable(priv); release_resource(priv->ioarea); kfree(priv->ioarea); @@ -409,27 +431,24 @@ static int __devexit i2c_au1550_remove(struct platform_device *pdev) { struct i2c_au1550_data *priv = platform_get_drvdata(pdev); - volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base; platform_set_drvdata(pdev, NULL); i2c_del_adapter(&priv->adap); - sp->psc_smbcfg = 0; - sp->psc_ctrl = PSC_CTRL_DISABLE; - au_sync(); + i2c_au1550_disable(priv); release_resource(priv->ioarea); kfree(priv->ioarea); kfree(priv); return 0; } +#ifdef CONFIG_PM static int i2c_au1550_suspend(struct platform_device *pdev, pm_message_t state) { struct i2c_au1550_data *priv = platform_get_drvdata(pdev); - volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base; - sp->psc_ctrl = PSC_CTRL_SUSPEND; - au_sync(); + i2c_au1550_disable(priv); + return 0; } @@ -437,14 +456,15 @@ static int i2c_au1550_resume(struct platform_device *pdev) { struct i2c_au1550_data *priv = platform_get_drvdata(pdev); - volatile psc_smb_t *sp = (volatile psc_smb_t *)priv->psc_base; - sp->psc_ctrl = PSC_CTRL_ENABLE; - au_sync(); - while (!(sp->psc_smbstat & PSC_SMBSTAT_SR)) - au_sync(); + i2c_au1550_setup(priv); + return 0; } +#else +#define i2c_au1550_suspend NULL +#define i2c_au1550_resume NULL +#endif static struct platform_driver au1xpsc_smbus_driver = { .driver = { -- cgit v1.2.3 From e9ca9eb9d7fc7bf3dc3cec5ba7edb089c4625f7b Mon Sep 17 00:00:00 2001 From: Jon Smirl Date: Mon, 14 Jul 2008 22:38:35 +0200 Subject: i2c: Export the i2c_bus_type symbol Export the root of the i2c bus so that PowerPC device tree code can iterate over devices on the i2c bus. Signed-off-by: Jon Smirl Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 3 ++- include/linux/i2c.h | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index d6cc58abf3ff..e45bb2838f42 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -201,7 +201,7 @@ static struct device_attribute i2c_dev_attrs[] = { { }, }; -static struct bus_type i2c_bus_type = { +struct bus_type i2c_bus_type = { .name = "i2c", .dev_attrs = i2c_dev_attrs, .match = i2c_device_match, @@ -212,6 +212,7 @@ static struct bus_type i2c_bus_type = { .suspend = i2c_device_suspend, .resume = i2c_device_resume, }; +EXPORT_SYMBOL_GPL(i2c_bus_type); /** diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 839d0ea3dca3..50cbab4b62b0 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -35,6 +35,8 @@ #include /* for completion */ #include +extern struct bus_type i2c_bus_type; + /* --- General options ------------------------------------------------ */ struct i2c_msg; -- cgit v1.2.3 From 2b7a5056a0a7ff17d5d2004c29c852a92a6bd632 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 14 Jul 2008 22:38:35 +0200 Subject: i2c: New-style EEPROM driver using device IDs Add a new-style driver for most I2C EEPROMs, giving sysfs read/write access to their data. Tested with various chips and clock rates. Signed-off-by: Wolfram Sang Signed-off-by: Jean Delvare --- drivers/i2c/chips/Kconfig | 26 ++ drivers/i2c/chips/Makefile | 1 + drivers/i2c/chips/at24.c | 583 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/i2c/at24.h | 28 +++ 4 files changed, 638 insertions(+) create mode 100644 drivers/i2c/chips/at24.c create mode 100644 include/linux/i2c/at24.h diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 6326468d5f0b..50e0a4653741 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -14,6 +14,32 @@ config DS1682 This driver can also be built as a module. If so, the module will be called ds1682. +config AT24 + tristate "EEPROMs from most vendors" + depends on SYSFS && EXPERIMENTAL + help + Enable this driver to get read/write support to most I2C EEPROMs, + after you configure the driver to know about each EEPROM on + your target board. Use these generic chip names, instead of + vendor-specific ones like at24c64 or 24lc02: + + 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, + 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024 + + Unless you like data loss puzzles, always be sure that any chip + you configure as a 24c32 (32 kbit) or larger is NOT really a + 24c16 (16 kbit) or smaller, and vice versa. Marking the chip + as read-only won't help recover from this. Also, if your chip + has any software write-protect mechanism you may want to review the + code to make sure this driver won't turn it on by accident. + + If you use this with an SMBus adapter instead of an I2C adapter, + full functionality is not available. Only smaller devices are + supported (24c16 and below, max 4 kByte). + + This driver can also be built as a module. If so, the module + will be called at24. + config SENSORS_EEPROM tristate "EEPROM reader" depends on EXPERIMENTAL diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index e47aca0ca5ae..39e3e69ed125 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -10,6 +10,7 @@ # obj-$(CONFIG_DS1682) += ds1682.o +obj-$(CONFIG_AT24) += at24.o obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o obj-$(CONFIG_SENSORS_MAX6875) += max6875.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o diff --git a/drivers/i2c/chips/at24.c b/drivers/i2c/chips/at24.c new file mode 100644 index 000000000000..e764c94f3e3d --- /dev/null +++ b/drivers/i2c/chips/at24.c @@ -0,0 +1,583 @@ +/* + * at24.c - handle most I2C EEPROMs + * + * Copyright (C) 2005-2007 David Brownell + * Copyright (C) 2008 Wolfram Sang, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. + * Differences between different vendor product lines (like Atmel AT24C or + * MicroChip 24LC, etc) won't much matter for typical read/write access. + * There are also I2C RAM chips, likewise interchangeable. One example + * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes). + * + * However, misconfiguration can lose data. "Set 16-bit memory address" + * to a part with 8-bit addressing will overwrite data. Writing with too + * big a page size also loses data. And it's not safe to assume that the + * conventional addresses 0x50..0x57 only hold eeproms; a PCF8563 RTC + * uses 0x51, for just one example. + * + * Accordingly, explicit board-specific configuration data should be used + * in almost all cases. (One partial exception is an SMBus used to access + * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.) + * + * So this driver uses "new style" I2C driver binding, expecting to be + * told what devices exist. That may be in arch/X/mach-Y/board-Z.c or + * similar kernel-resident tables; or, configuration data coming from + * a bootloader. + * + * Other than binding model, current differences from "eeprom" driver are + * that this one handles write access and isn't restricted to 24c02 devices. + * It also handles larger devices (32 kbit and up) with two-byte addresses, + * which won't work on pure SMBus systems. + */ + +struct at24_data { + struct at24_platform_data chip; + bool use_smbus; + + /* + * Lock protects against activities from other Linux tasks, + * but not from changes by other I2C masters. + */ + struct mutex lock; + struct bin_attribute bin; + + u8 *writebuf; + unsigned write_max; + unsigned num_addresses; + + /* + * Some chips tie up multiple I2C addresses; dummy devices reserve + * them for us, and we'll use them with SMBus calls. + */ + struct i2c_client *client[]; +}; + +/* + * This parameter is to help this driver avoid blocking other drivers out + * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C + * clock, one 256 byte read takes about 1/43 second which is excessive; + * but the 1/170 second it takes at 400 kHz may be quite reasonable; and + * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible. + * + * This value is forced to be a power of two so that writes align on pages. + */ +static unsigned io_limit = 128; +module_param(io_limit, uint, 0); +MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)"); + +/* + * Specs often allow 5 msec for a page write, sometimes 20 msec; + * it's important to recover from write timeouts. + */ +static unsigned write_timeout = 25; +module_param(write_timeout, uint, 0); +MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)"); + +#define AT24_SIZE_BYTELEN 5 +#define AT24_SIZE_FLAGS 8 + +#define AT24_BITMASK(x) (BIT(x) - 1) + +/* create non-zero magic value for given eeprom parameters */ +#define AT24_DEVICE_MAGIC(_len, _flags) \ + ((1 << AT24_SIZE_FLAGS | (_flags)) \ + << AT24_SIZE_BYTELEN | ilog2(_len)) + +static const struct i2c_device_id at24_ids[] = { + /* needs 8 addresses as A0-A2 are ignored */ + { "24c00", AT24_DEVICE_MAGIC(128 / 8, AT24_FLAG_TAKE8ADDR) }, + /* old variants can't be handled with this generic entry! */ + { "24c01", AT24_DEVICE_MAGIC(1024 / 8, 0) }, + { "24c02", AT24_DEVICE_MAGIC(2048 / 8, 0) }, + /* spd is a 24c02 in memory DIMMs */ + { "spd", AT24_DEVICE_MAGIC(2048 / 8, + AT24_FLAG_READONLY | AT24_FLAG_IRUGO) }, + { "24c04", AT24_DEVICE_MAGIC(4096 / 8, 0) }, + /* 24rf08 quirk is handled at i2c-core */ + { "24c08", AT24_DEVICE_MAGIC(8192 / 8, 0) }, + { "24c16", AT24_DEVICE_MAGIC(16384 / 8, 0) }, + { "24c32", AT24_DEVICE_MAGIC(32768 / 8, AT24_FLAG_ADDR16) }, + { "24c64", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16) }, + { "24c128", AT24_DEVICE_MAGIC(131072 / 8, AT24_FLAG_ADDR16) }, + { "24c256", AT24_DEVICE_MAGIC(262144 / 8, AT24_FLAG_ADDR16) }, + { "24c512", AT24_DEVICE_MAGIC(524288 / 8, AT24_FLAG_ADDR16) }, + { "24c1024", AT24_DEVICE_MAGIC(1048576 / 8, AT24_FLAG_ADDR16) }, + { "at24", 0 }, + { /* END OF LIST */ } +}; +MODULE_DEVICE_TABLE(i2c, at24_ids); + +/*-------------------------------------------------------------------------*/ + +/* + * This routine supports chips which consume multiple I2C addresses. It + * computes the addressing information to be used for a given r/w request. + * Assumes that sanity checks for offset happened at sysfs-layer. + */ +static struct i2c_client *at24_translate_offset(struct at24_data *at24, + unsigned *offset) +{ + unsigned i; + + if (at24->chip.flags & AT24_FLAG_ADDR16) { + i = *offset >> 16; + *offset &= 0xffff; + } else { + i = *offset >> 8; + *offset &= 0xff; + } + + return at24->client[i]; +} + +static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, + unsigned offset, size_t count) +{ + struct i2c_msg msg[2]; + u8 msgbuf[2]; + struct i2c_client *client; + int status, i; + + memset(msg, 0, sizeof(msg)); + + /* + * REVISIT some multi-address chips don't rollover page reads to + * the next slave address, so we may need to truncate the count. + * Those chips might need another quirk flag. + * + * If the real hardware used four adjacent 24c02 chips and that + * were misconfigured as one 24c08, that would be a similar effect: + * one "eeprom" file not four, but larger reads would fail when + * they crossed certain pages. + */ + + /* + * Slave address and byte offset derive from the offset. Always + * set the byte address; on a multi-master board, another master + * may have changed the chip's "current" address pointer. + */ + client = at24_translate_offset(at24, &offset); + + if (count > io_limit) + count = io_limit; + + /* Smaller eeproms can work given some SMBus extension calls */ + if (at24->use_smbus) { + if (count > I2C_SMBUS_BLOCK_MAX) + count = I2C_SMBUS_BLOCK_MAX; + status = i2c_smbus_read_i2c_block_data(client, offset, + count, buf); + dev_dbg(&client->dev, "smbus read %zd@%d --> %d\n", + count, offset, status); + return (status < 0) ? -EIO : status; + } + + /* + * When we have a better choice than SMBus calls, use a combined + * I2C message. Write address; then read up to io_limit data bytes. + * Note that read page rollover helps us here (unlike writes). + * msgbuf is u8 and will cast to our needs. + */ + i = 0; + if (at24->chip.flags & AT24_FLAG_ADDR16) + msgbuf[i++] = offset >> 8; + msgbuf[i++] = offset; + + msg[0].addr = client->addr; + msg[0].buf = msgbuf; + msg[0].len = i; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; + + status = i2c_transfer(client->adapter, msg, 2); + dev_dbg(&client->dev, "i2c read %zd@%d --> %d\n", + count, offset, status); + + if (status == 2) + return count; + else if (status >= 0) + return -EIO; + else + return status; +} + +static ssize_t at24_bin_read(struct kobject *kobj, struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct at24_data *at24; + ssize_t retval = 0; + + at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); + + if (unlikely(!count)) + return count; + + /* + * Read data from chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&at24->lock); + + while (count) { + ssize_t status; + + status = at24_eeprom_read(at24, buf, off, count); + if (status <= 0) { + if (retval == 0) + retval = status; + break; + } + buf += status; + off += status; + count -= status; + retval += status; + } + + mutex_unlock(&at24->lock); + + return retval; +} + + +/* + * REVISIT: export at24_bin{read,write}() to let other kernel code use + * eeprom data. For example, it might hold a board's Ethernet address, or + * board-specific calibration data generated on the manufacturing floor. + */ + + +/* + * Note that if the hardware write-protect pin is pulled high, the whole + * chip is normally write protected. But there are plenty of product + * variants here, including OTP fuses and partial chip protect. + * + * We only use page mode writes; the alternative is sloooow. This routine + * writes at most one page. + */ +static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf, + unsigned offset, size_t count) +{ + struct i2c_client *client; + struct i2c_msg msg; + ssize_t status; + unsigned long timeout, write_time; + unsigned next_page; + + /* Get corresponding I2C address and adjust offset */ + client = at24_translate_offset(at24, &offset); + + /* write_max is at most a page */ + if (count > at24->write_max) + count = at24->write_max; + + /* Never roll over backwards, to the start of this page */ + next_page = roundup(offset + 1, at24->chip.page_size); + if (offset + count > next_page) + count = next_page - offset; + + /* If we'll use I2C calls for I/O, set up the message */ + if (!at24->use_smbus) { + int i = 0; + + msg.addr = client->addr; + msg.flags = 0; + + /* msg.buf is u8 and casts will mask the values */ + msg.buf = at24->writebuf; + if (at24->chip.flags & AT24_FLAG_ADDR16) + msg.buf[i++] = offset >> 8; + + msg.buf[i++] = offset; + memcpy(&msg.buf[i], buf, count); + msg.len = i + count; + } + + /* + * Writes fail if the previous one didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. + */ + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + write_time = jiffies; + if (at24->use_smbus) { + status = i2c_smbus_write_i2c_block_data(client, + offset, count, buf); + if (status == 0) + status = count; + } else { + status = i2c_transfer(client->adapter, &msg, 1); + if (status == 1) + status = count; + } + dev_dbg(&client->dev, "write %zd@%d --> %zd (%ld)\n", + count, offset, status, jiffies); + + if (status == count) + return count; + + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(write_time, timeout)); + + return -ETIMEDOUT; +} + +static ssize_t at24_bin_write(struct kobject *kobj, struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct at24_data *at24; + ssize_t retval = 0; + + at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); + + if (unlikely(!count)) + return count; + + /* + * Write data to chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&at24->lock); + + while (count) { + ssize_t status; + + status = at24_eeprom_write(at24, buf, off, count); + if (status <= 0) { + if (retval == 0) + retval = status; + break; + } + buf += status; + off += status; + count -= status; + retval += status; + } + + mutex_unlock(&at24->lock); + + return retval; +} + +/*-------------------------------------------------------------------------*/ + +static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct at24_platform_data chip; + bool writable; + bool use_smbus = false; + struct at24_data *at24; + int err; + unsigned i, num_addresses; + kernel_ulong_t magic; + + if (client->dev.platform_data) { + chip = *(struct at24_platform_data *)client->dev.platform_data; + } else { + if (!id->driver_data) { + err = -ENODEV; + goto err_out; + } + magic = id->driver_data; + chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN)); + magic >>= AT24_SIZE_BYTELEN; + chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS); + /* + * This is slow, but we can't know all eeproms, so we better + * play safe. Specifying custom eeprom-types via platform_data + * is recommended anyhow. + */ + chip.page_size = 1; + } + + if (!is_power_of_2(chip.byte_len)) + dev_warn(&client->dev, + "byte_len looks suspicious (no power of 2)!\n"); + if (!is_power_of_2(chip.page_size)) + dev_warn(&client->dev, + "page_size looks suspicious (no power of 2)!\n"); + + /* Use I2C operations unless we're stuck with SMBus extensions. */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + if (chip.flags & AT24_FLAG_ADDR16) { + err = -EPFNOSUPPORT; + goto err_out; + } + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + err = -EPFNOSUPPORT; + goto err_out; + } + use_smbus = true; + } + + if (chip.flags & AT24_FLAG_TAKE8ADDR) + num_addresses = 8; + else + num_addresses = DIV_ROUND_UP(chip.byte_len, + (chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + + at24 = kzalloc(sizeof(struct at24_data) + + num_addresses * sizeof(struct i2c_client *), GFP_KERNEL); + if (!at24) { + err = -ENOMEM; + goto err_out; + } + + mutex_init(&at24->lock); + at24->use_smbus = use_smbus; + at24->chip = chip; + at24->num_addresses = num_addresses; + + /* + * Export the EEPROM bytes through sysfs, since that's convenient. + * By default, only root should see the data (maybe passwords etc) + */ + at24->bin.attr.name = "eeprom"; + at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR; + at24->bin.attr.owner = THIS_MODULE; + at24->bin.read = at24_bin_read; + at24->bin.size = chip.byte_len; + + writable = !(chip.flags & AT24_FLAG_READONLY); + if (writable) { + if (!use_smbus || i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) { + + unsigned write_max = chip.page_size; + + at24->bin.write = at24_bin_write; + at24->bin.attr.mode |= S_IWUSR; + + if (write_max > io_limit) + write_max = io_limit; + if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX) + write_max = I2C_SMBUS_BLOCK_MAX; + at24->write_max = write_max; + + /* buffer (data + address at the beginning) */ + at24->writebuf = kmalloc(write_max + 2, GFP_KERNEL); + if (!at24->writebuf) { + err = -ENOMEM; + goto err_struct; + } + } else { + dev_warn(&client->dev, + "cannot write due to controller restrictions."); + } + } + + at24->client[0] = client; + + /* use dummy devices for multiple-address chips */ + for (i = 1; i < num_addresses; i++) { + at24->client[i] = i2c_new_dummy(client->adapter, + client->addr + i); + if (!at24->client[i]) { + dev_err(&client->dev, "address 0x%02x unavailable\n", + client->addr + i); + err = -EADDRINUSE; + goto err_clients; + } + } + + err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin); + if (err) + goto err_clients; + + i2c_set_clientdata(client, at24); + + dev_info(&client->dev, "%Zd byte %s EEPROM %s\n", + at24->bin.size, client->name, + writable ? "(writable)" : "(read-only)"); + dev_dbg(&client->dev, + "page_size %d, num_addresses %d, write_max %d%s\n", + chip.page_size, num_addresses, + at24->write_max, + use_smbus ? ", use_smbus" : ""); + + return 0; + +err_clients: + for (i = 1; i < num_addresses; i++) + if (at24->client[i]) + i2c_unregister_device(at24->client[i]); + + kfree(at24->writebuf); +err_struct: + kfree(at24); +err_out: + dev_dbg(&client->dev, "probe error %d\n", err); + return err; +} + +static int __devexit at24_remove(struct i2c_client *client) +{ + struct at24_data *at24; + int i; + + at24 = i2c_get_clientdata(client); + sysfs_remove_bin_file(&client->dev.kobj, &at24->bin); + + for (i = 1; i < at24->num_addresses; i++) + i2c_unregister_device(at24->client[i]); + + kfree(at24->writebuf); + kfree(at24); + i2c_set_clientdata(client, NULL); + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct i2c_driver at24_driver = { + .driver = { + .name = "at24", + .owner = THIS_MODULE, + }, + .probe = at24_probe, + .remove = __devexit_p(at24_remove), + .id_table = at24_ids, +}; + +static int __init at24_init(void) +{ + io_limit = rounddown_pow_of_two(io_limit); + return i2c_add_driver(&at24_driver); +} +module_init(at24_init); + +static void __exit at24_exit(void) +{ + i2c_del_driver(&at24_driver); +} +module_exit(at24_exit); + +MODULE_DESCRIPTION("Driver for most I2C EEPROMs"); +MODULE_AUTHOR("David Brownell and Wolfram Sang"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/i2c/at24.h b/include/linux/i2c/at24.h new file mode 100644 index 000000000000..f6edd522a929 --- /dev/null +++ b/include/linux/i2c/at24.h @@ -0,0 +1,28 @@ +#ifndef _LINUX_AT24_H +#define _LINUX_AT24_H + +#include + +/* + * As seen through Linux I2C, differences between the most common types of I2C + * memory include: + * - How much memory is available (usually specified in bit)? + * - What write page size does it support? + * - Special flags (16 bit addresses, read_only, world readable...)? + * + * If you set up a custom eeprom type, please double-check the parameters. + * Especially page_size needs extra care, as you risk data loss if your value + * is bigger than what the chip actually supports! + */ + +struct at24_platform_data { + u32 byte_len; /* size (sum of all addr) */ + u16 page_size; /* for writes */ + u8 flags; +#define AT24_FLAG_ADDR16 0x80 /* address pointer is 16 bit */ +#define AT24_FLAG_READONLY 0x40 /* sysfs-entry will be read-only */ +#define AT24_FLAG_IRUGO 0x20 /* sysfs-entry will be world-readable */ +#define AT24_FLAG_TAKE8ADDR 0x10 /* take always 8 addresses (24c00) */ +}; + +#endif /* _LINUX_AT24_H */ -- cgit v1.2.3 From b1204e6ec16468ebf89d9d818bfe425ca7adcdf3 Mon Sep 17 00:00:00 2001 From: Sean MacLennan Date: Mon, 14 Jul 2008 22:38:36 +0200 Subject: i2c-ibm_iic: Register child nodes This patch completes the conversion of the IBM IIC driver to an of-platform driver. It removes the index from the IBM IIC driver and makes it an unnumbered driver. It then calls of_register_i2c_devices to properly register all the child nodes in the DTS. Signed-off-by: Sean MacLennan Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-ibm_iic.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 070f078b5f5c..651f2f1ae5b7 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -43,6 +43,7 @@ #include #include #include +#include #include "i2c-ibm_iic.h" @@ -696,7 +697,7 @@ static int __devinit iic_probe(struct of_device *ofdev, struct device_node *np = ofdev->node; struct ibm_iic_private *dev; struct i2c_adapter *adap; - const u32 *indexp, *freq; + const u32 *freq; int ret; dev = kzalloc(sizeof(*dev), GFP_KERNEL); @@ -707,14 +708,6 @@ static int __devinit iic_probe(struct of_device *ofdev, dev_set_drvdata(&ofdev->dev, dev); - indexp = of_get_property(np, "index", NULL); - if (!indexp) { - dev_err(&ofdev->dev, "no index specified\n"); - ret = -EINVAL; - goto error_cleanup; - } - dev->idx = *indexp; - dev->vaddr = of_iomap(np, 0); if (dev->vaddr == NULL) { dev_err(&ofdev->dev, "failed to iomap device\n"); @@ -757,14 +750,16 @@ static int __devinit iic_probe(struct of_device *ofdev, adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->algo = &iic_algo; adap->timeout = 1; - adap->nr = dev->idx; - ret = i2c_add_numbered_adapter(adap); + ret = i2c_add_adapter(adap); if (ret < 0) { dev_err(&ofdev->dev, "failed to register i2c adapter\n"); goto error_cleanup; } + /* Now register all the child nodes */ + of_register_i2c_devices(adap, np); + dev_info(&ofdev->dev, "using %s mode\n", dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)"); -- cgit v1.2.3 From f741f673298b03b92d46e30b0b6fd0e960423665 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:36 +0200 Subject: i2c: Clean up old chip drivers Clean up old i2c chip drivers: * Name the i2c_client "client" instead of "new_client". * Drop useless initializations to 0. Signed-off-by: Jean Delvare --- drivers/i2c/chips/eeprom.c | 32 +++++++++++++++----------------- drivers/i2c/chips/max6875.c | 4 +--- drivers/i2c/chips/pca9539.c | 25 ++++++++++++------------- drivers/i2c/chips/pcf8574.c | 23 +++++++++++------------ drivers/i2c/chips/pcf8591.c | 31 +++++++++++++++---------------- 5 files changed, 54 insertions(+), 61 deletions(-) diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index e22ec3b3aedf..373ea8d8fe8f 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -158,7 +158,7 @@ static int eeprom_attach_adapter(struct i2c_adapter *adapter) /* This function is called by i2c_probe */ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) { - struct i2c_client *new_client; + struct i2c_client *client; struct eeprom_data *data; int err = 0; @@ -184,22 +184,20 @@ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) goto exit; } - new_client = &data->client; + client = &data->client; memset(data->data, 0xff, EEPROM_SIZE); - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &eeprom_driver; - new_client->flags = 0; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &eeprom_driver; /* Fill in the remaining client fields */ - strlcpy(new_client->name, "eeprom", I2C_NAME_SIZE); - data->valid = 0; + strlcpy(client->name, "eeprom", I2C_NAME_SIZE); mutex_init(&data->update_lock); data->nature = UNKNOWN; /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + if ((err = i2c_attach_client(client))) goto exit_kfree; /* Detect the Vaio nature of EEPROMs. @@ -208,27 +206,27 @@ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) { char name[4]; - name[0] = i2c_smbus_read_byte_data(new_client, 0x80); - name[1] = i2c_smbus_read_byte_data(new_client, 0x81); - name[2] = i2c_smbus_read_byte_data(new_client, 0x82); - name[3] = i2c_smbus_read_byte_data(new_client, 0x83); + name[0] = i2c_smbus_read_byte_data(client, 0x80); + name[1] = i2c_smbus_read_byte_data(client, 0x81); + name[2] = i2c_smbus_read_byte_data(client, 0x82); + name[3] = i2c_smbus_read_byte_data(client, 0x83); if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) { - dev_info(&new_client->dev, "Vaio EEPROM detected, " + dev_info(&client->dev, "Vaio EEPROM detected, " "enabling privacy protection\n"); data->nature = VAIO; } } /* create the sysfs eeprom file */ - err = sysfs_create_bin_file(&new_client->dev.kobj, &eeprom_attr); + err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr); if (err) goto exit_detach; return 0; exit_detach: - i2c_detach_client(new_client); + i2c_detach_client(client); exit_kfree: kfree(data); exit: diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c index cf507b3f60f3..5a0285d8b6f9 100644 --- a/drivers/i2c/chips/max6875.c +++ b/drivers/i2c/chips/max6875.c @@ -170,7 +170,7 @@ static int max6875_detect(struct i2c_adapter *adapter, int address, int kind) struct i2c_client *real_client; struct i2c_client *fake_client; struct max6875_data *data; - int err = 0; + int err; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA | I2C_FUNC_SMBUS_READ_BYTE)) @@ -195,7 +195,6 @@ static int max6875_detect(struct i2c_adapter *adapter, int address, int kind) real_client->addr = address; real_client->adapter = adapter; real_client->driver = &max6875_driver; - real_client->flags = 0; strlcpy(real_client->name, "max6875", I2C_NAME_SIZE); mutex_init(&data->update_lock); @@ -204,7 +203,6 @@ static int max6875_detect(struct i2c_adapter *adapter, int address, int kind) fake_client->addr = address | 1; fake_client->adapter = adapter; fake_client->driver = &max6875_driver; - fake_client->flags = 0; strlcpy(fake_client->name, "max6875 subclient", I2C_NAME_SIZE); if ((err = i2c_attach_client(real_client)) != 0) diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c index f43c4e79b55e..58ab7f26be26 100644 --- a/drivers/i2c/chips/pca9539.c +++ b/drivers/i2c/chips/pca9539.c @@ -113,7 +113,7 @@ static int pca9539_attach_adapter(struct i2c_adapter *adapter) /* This function is called by i2c_probe */ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind) { - struct i2c_client *new_client; + struct i2c_client *client; struct pca9539_data *data; int err = 0; @@ -127,29 +127,28 @@ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind) goto exit; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &pca9539_driver; - new_client->flags = 0; + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &pca9539_driver; if (kind < 0) { /* Detection: the pca9539 only has 8 registers (0-7). A read of 7 should succeed, but a read of 8 should fail. */ - if ((i2c_smbus_read_byte_data(new_client, 7) < 0) || - (i2c_smbus_read_byte_data(new_client, 8) >= 0)) + if ((i2c_smbus_read_byte_data(client, 7) < 0) || + (i2c_smbus_read_byte_data(client, 8) >= 0)) goto exit_kfree; } - strlcpy(new_client->name, "pca9539", I2C_NAME_SIZE); + strlcpy(client->name, "pca9539", I2C_NAME_SIZE); /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + if ((err = i2c_attach_client(client))) goto exit_kfree; /* Register sysfs hooks */ - err = sysfs_create_group(&new_client->dev.kobj, + err = sysfs_create_group(&client->dev.kobj, &pca9539_defattr_group); if (err) goto exit_detach; @@ -157,7 +156,7 @@ static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind) return 0; exit_detach: - i2c_detach_client(new_client); + i2c_detach_client(client); exit_kfree: kfree(data); exit: diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c index ad2f7901a8c9..1b3db2b3ada9 100644 --- a/drivers/i2c/chips/pcf8574.c +++ b/drivers/i2c/chips/pcf8574.c @@ -127,7 +127,7 @@ static int pcf8574_attach_adapter(struct i2c_adapter *adapter) /* This function is called by i2c_probe */ static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) { - struct i2c_client *new_client; + struct i2c_client *client; struct pcf8574_data *data; int err = 0; const char *client_name = ""; @@ -142,12 +142,11 @@ static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) goto exit; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &pcf8574_driver; - new_client->flags = 0; + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &pcf8574_driver; /* Now, we would do the remaining detection. But the PCF8574 is plainly impossible to detect! Stupid chip. */ @@ -166,23 +165,23 @@ static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) client_name = "pcf8574"; /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, client_name, I2C_NAME_SIZE); + strlcpy(client->name, client_name, I2C_NAME_SIZE); /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + if ((err = i2c_attach_client(client))) goto exit_free; /* Initialize the PCF8574 chip */ - pcf8574_init_client(new_client); + pcf8574_init_client(client); /* Register sysfs hooks */ - err = sysfs_create_group(&new_client->dev.kobj, &pcf8574_attr_group); + err = sysfs_create_group(&client->dev.kobj, &pcf8574_attr_group); if (err) goto exit_detach; return 0; exit_detach: - i2c_detach_client(new_client); + i2c_detach_client(client); exit_free: kfree(data); exit: diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c index d3a24524817a..db735379f22f 100644 --- a/drivers/i2c/chips/pcf8591.c +++ b/drivers/i2c/chips/pcf8591.c @@ -188,7 +188,7 @@ static int pcf8591_attach_adapter(struct i2c_adapter *adapter) /* This function is called by i2c_probe */ static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) { - struct i2c_client *new_client; + struct i2c_client *client; struct pcf8591_data *data; int err = 0; @@ -203,12 +203,11 @@ static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) goto exit; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &pcf8591_driver; - new_client->flags = 0; + client = &data->client; + i2c_set_clientdata(client, data); + client->addr = address; + client->adapter = adapter; + client->driver = &pcf8591_driver; /* Now, we would do the remaining detection. But the PCF8591 is plainly impossible to detect! Stupid chip. */ @@ -219,31 +218,31 @@ static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, "pcf8591", I2C_NAME_SIZE); + strlcpy(client->name, "pcf8591", I2C_NAME_SIZE); mutex_init(&data->update_lock); /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) + if ((err = i2c_attach_client(client))) goto exit_kfree; /* Initialize the PCF8591 chip */ - pcf8591_init_client(new_client); + pcf8591_init_client(client); /* Register sysfs hooks */ - err = sysfs_create_group(&new_client->dev.kobj, &pcf8591_attr_group); + err = sysfs_create_group(&client->dev.kobj, &pcf8591_attr_group); if (err) goto exit_detach; /* Register input2 if not in "two differential inputs" mode */ if (input_mode != 3) { - if ((err = device_create_file(&new_client->dev, + if ((err = device_create_file(&client->dev, &dev_attr_in2_input))) goto exit_sysfs_remove; } /* Register input3 only in "four single ended inputs" mode */ if (input_mode == 0) { - if ((err = device_create_file(&new_client->dev, + if ((err = device_create_file(&client->dev, &dev_attr_in3_input))) goto exit_sysfs_remove; } @@ -251,10 +250,10 @@ static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) return 0; exit_sysfs_remove: - sysfs_remove_group(&new_client->dev.kobj, &pcf8591_attr_group_opt); - sysfs_remove_group(&new_client->dev.kobj, &pcf8591_attr_group); + sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group_opt); + sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group); exit_detach: - i2c_detach_client(new_client); + i2c_detach_client(client); exit_kfree: kfree(data); exit: -- cgit v1.2.3 From 8508159e2f3b82bf109f0ec77bcbd8ff3f3a7e17 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:36 +0200 Subject: i2c: Call client_unregister for new-style devices too We call adapter->client_register for both legacy and new-style i2c devices, however we only call adapter->client_unregister for legacy drivers. This doesn't make much sense. Usually, drivers will undo in client_unregister what they did in client_register, so we should call neither or both for every given i2c device. In order to ease the transition from legacy to new-style devices, it seems preferable to actually call both. Signed-off-by: Jean Delvare Cc: David Brownell --- drivers/i2c/i2c-core.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index e45bb2838f42..5e249d758828 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -300,6 +300,14 @@ void i2c_unregister_device(struct i2c_client *client) return; } + if (adapter->client_unregister) { + if (adapter->client_unregister(client)) { + dev_warn(&client->dev, + "client_unregister [%s] failed\n", + client->name); + } + } + mutex_lock(&adapter->clist_lock); list_del(&client->list); mutex_unlock(&adapter->clist_lock); -- cgit v1.2.3 From 4735c98f8447acb1c8977e2b8024640f7bf36dd6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 14 Jul 2008 22:38:36 +0200 Subject: i2c: Add detection capability to new-style drivers Add a mechanism to let new-style i2c drivers optionally autodetect devices they would support on selected buses and ask i2c-core to instantiate them. This is a replacement for legacy i2c drivers, much cleaner. Where drivers had to implement both a legacy i2c_driver and a new-style i2c_driver so far, this mechanism makes it possible to get rid of the legacy i2c_driver and implement both enumerated and detected device support with just one (new-style) i2c_driver. Here is a quick conversion guide for these drivers, step by step: * Delete the legacy driver definition, registration and removal. Delete the attach_adapter and detach_client methods of the legacy driver. * Change the prototype of the legacy detect function from static int foo_detect(struct i2c_adapter *adapter, int address, int kind); to static int foo_detect(struct i2c_client *client, int kind, struct i2c_board_info *info); * Set the new-style driver detect callback to this new function, and set its address_data to &addr_data (addr_data is generally provided by I2C_CLIENT_INSMOD.) * Add the appropriate class to the new-style driver. This is typically the class the legacy attach_adapter method was checking for. Class checking is now mandatory (done by i2c-core.) See for the list of available classes. * Remove the i2c_client allocation and freeing from the detect function. A pre-allocated client is now handed to you by i2c-core, and is freed automatically. * Make the detect function fill the type field of the i2c_board_info structure it was passed as a parameter, and return 0, on success. If the detection fails, return -ENODEV. Signed-off-by: Jean Delvare --- Documentation/i2c/writing-clients | 29 +++++ drivers/i2c/i2c-core.c | 223 ++++++++++++++++++++++++++++++++++++-- include/linux/i2c.h | 36 +++++- 3 files changed, 272 insertions(+), 16 deletions(-) diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 63722d3c9cdf..6b61b3a2e90b 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -44,6 +44,10 @@ static struct i2c_driver foo_driver = { .id_table = foo_ids, .probe = foo_probe, .remove = foo_remove, + /* if device autodetection is needed: */ + .class = I2C_CLASS_SOMETHING, + .detect = foo_detect, + .address_data = &addr_data, /* else, driver uses "legacy" binding model: */ .attach_adapter = foo_attach_adapter, @@ -217,6 +221,31 @@ in the I2C bus driver. You may want to save the returned i2c_client reference for later use. +Device Detection (Standard driver model) +---------------------------------------- + +Sometimes you do not know in advance which I2C devices are connected to +a given I2C bus. This is for example the case of hardware monitoring +devices on a PC's SMBus. In that case, you may want to let your driver +detect supported devices automatically. This is how the legacy model +was working, and is now available as an extension to the standard +driver model (so that we can finally get rid of the legacy model.) + +You simply have to define a detect callback which will attempt to +identify supported devices (returning 0 for supported ones and -ENODEV +for unsupported ones), a list of addresses to probe, and a device type +(or class) so that only I2C buses which may have that type of device +connected (and not otherwise enumerated) will be probed. The i2c +core will then call you back as needed and will instantiate a device +for you for every successful detection. + +Note that this mechanism is purely optional and not suitable for all +devices. You need some reliable way to identify the supported devices +(typically using device-specific, dedicated identification registers), +otherwise misdetections are likely to occur and things can get wrong +quickly. + + Device Deletion (Standard driver model) --------------------------------------- diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 5e249d758828..0a79f7661017 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -42,7 +42,9 @@ static DEFINE_MUTEX(core_lock); static DEFINE_IDR(i2c_adapter_idr); -#define is_newstyle_driver(d) ((d)->probe || (d)->remove) +#define is_newstyle_driver(d) ((d)->probe || (d)->remove || (d)->detect) + +static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver); /* ------------------------------------------------------------------------- */ @@ -418,6 +420,10 @@ static int i2c_do_add_adapter(struct device_driver *d, void *data) struct i2c_driver *driver = to_i2c_driver(d); struct i2c_adapter *adap = data; + /* Detect supported devices on that bus, and instantiate them */ + i2c_detect(adap, driver); + + /* Let legacy drivers scan this bus for matching devices */ if (driver->attach_adapter) { /* We ignore the return code; if it fails, too bad */ driver->attach_adapter(adap); @@ -457,7 +463,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap) if (adap->nr < __i2c_first_dynamic_bus_num) i2c_scan_static_board_info(adap); - /* let legacy drivers scan this bus for matching devices */ + /* Notify drivers */ dummy = bus_for_each_drv(&i2c_bus_type, NULL, adap, i2c_do_add_adapter); @@ -563,8 +569,19 @@ static int i2c_do_del_adapter(struct device_driver *d, void *data) { struct i2c_driver *driver = to_i2c_driver(d); struct i2c_adapter *adapter = data; + struct i2c_client *client, *_n; int res; + /* Remove the devices we created ourselves */ + list_for_each_entry_safe(client, _n, &driver->clients, detected) { + if (client->adapter == adapter) { + dev_dbg(&adapter->dev, "Removing %s at 0x%x\n", + client->name, client->addr); + list_del(&client->detected); + i2c_unregister_device(client); + } + } + if (!driver->detach_adapter) return 0; res = driver->detach_adapter(adapter); @@ -651,7 +668,11 @@ static int __attach_adapter(struct device *dev, void *data) struct i2c_adapter *adapter = to_i2c_adapter(dev); struct i2c_driver *driver = data; - driver->attach_adapter(adapter); + i2c_detect(adapter, driver); + + /* Legacy drivers scan i2c busses directly */ + if (driver->attach_adapter) + driver->attach_adapter(adapter); return 0; } @@ -695,10 +716,9 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) pr_debug("i2c-core: driver [%s] registered\n", driver->driver.name); - /* legacy drivers scan i2c busses directly */ - if (driver->attach_adapter) - class_for_each_device(&i2c_adapter_class, driver, - __attach_adapter); + INIT_LIST_HEAD(&driver->clients); + /* Walk the adapters that are already present */ + class_for_each_device(&i2c_adapter_class, driver, __attach_adapter); mutex_unlock(&core_lock); return 0; @@ -709,6 +729,17 @@ static int __detach_adapter(struct device *dev, void *data) { struct i2c_adapter *adapter = to_i2c_adapter(dev); struct i2c_driver *driver = data; + struct i2c_client *client, *_n; + + list_for_each_entry_safe(client, _n, &driver->clients, detected) { + dev_dbg(&adapter->dev, "Removing %s at 0x%x\n", + client->name, client->addr); + list_del(&client->detected); + i2c_unregister_device(client); + } + + if (is_newstyle_driver(driver)) + return 0; /* Have a look at each adapter, if clients of this driver are still * attached. If so, detach them to be able to kill the driver @@ -747,10 +778,7 @@ void i2c_del_driver(struct i2c_driver *driver) { mutex_lock(&core_lock); - /* legacy driver? */ - if (!is_newstyle_driver(driver)) - class_for_each_device(&i2c_adapter_class, driver, - __detach_adapter); + class_for_each_device(&i2c_adapter_class, driver, __detach_adapter); driver_unregister(&driver->driver); pr_debug("i2c-core: driver [%s] unregistered\n", driver->driver.name); @@ -1205,6 +1233,179 @@ int i2c_probe(struct i2c_adapter *adapter, } EXPORT_SYMBOL(i2c_probe); +/* Separate detection function for new-style drivers */ +static int i2c_detect_address(struct i2c_client *temp_client, int kind, + struct i2c_driver *driver) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter = temp_client->adapter; + int addr = temp_client->addr; + int err; + + /* Make sure the address is valid */ + if (addr < 0x03 || addr > 0x77) { + dev_warn(&adapter->dev, "Invalid probe address 0x%02x\n", + addr); + return -EINVAL; + } + + /* Skip if already in use */ + if (i2c_check_addr(adapter, addr)) + return 0; + + /* Make sure there is something at this address, unless forced */ + if (kind < 0) { + if (i2c_smbus_xfer(adapter, addr, 0, 0, 0, + I2C_SMBUS_QUICK, NULL) < 0) + return 0; + + /* prevent 24RF08 corruption */ + if ((addr & ~0x0f) == 0x50) + i2c_smbus_xfer(adapter, addr, 0, 0, 0, + I2C_SMBUS_QUICK, NULL); + } + + /* Finally call the custom detection function */ + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = addr; + err = driver->detect(temp_client, kind, &info); + if (err) { + /* -ENODEV is returned if the detection fails. We catch it + here as this isn't an error. */ + return err == -ENODEV ? 0 : err; + } + + /* Consistency check */ + if (info.type[0] == '\0') { + dev_err(&adapter->dev, "%s detection function provided " + "no name for 0x%x\n", driver->driver.name, + addr); + } else { + struct i2c_client *client; + + /* Detection succeeded, instantiate the device */ + dev_dbg(&adapter->dev, "Creating %s at 0x%02x\n", + info.type, info.addr); + client = i2c_new_device(adapter, &info); + if (client) + list_add_tail(&client->detected, &driver->clients); + else + dev_err(&adapter->dev, "Failed creating %s at 0x%02x\n", + info.type, info.addr); + } + return 0; +} + +static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver) +{ + const struct i2c_client_address_data *address_data; + struct i2c_client *temp_client; + int i, err = 0; + int adap_id = i2c_adapter_id(adapter); + + address_data = driver->address_data; + if (!driver->detect || !address_data) + return 0; + + /* Set up a temporary client to help detect callback */ + temp_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); + if (!temp_client) + return -ENOMEM; + temp_client->adapter = adapter; + + /* Force entries are done first, and are not affected by ignore + entries */ + if (address_data->forces) { + const unsigned short * const *forces = address_data->forces; + int kind; + + for (kind = 0; forces[kind]; kind++) { + for (i = 0; forces[kind][i] != I2C_CLIENT_END; + i += 2) { + if (forces[kind][i] == adap_id + || forces[kind][i] == ANY_I2C_BUS) { + dev_dbg(&adapter->dev, "found force " + "parameter for adapter %d, " + "addr 0x%02x, kind %d\n", + adap_id, forces[kind][i + 1], + kind); + temp_client->addr = forces[kind][i + 1]; + err = i2c_detect_address(temp_client, + kind, driver); + if (err) + goto exit_free; + } + } + } + } + + /* Stop here if we can't use SMBUS_QUICK */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) { + if (address_data->probe[0] == I2C_CLIENT_END + && address_data->normal_i2c[0] == I2C_CLIENT_END) + goto exit_free; + + dev_warn(&adapter->dev, "SMBus Quick command not supported, " + "can't probe for chips\n"); + err = -EOPNOTSUPP; + goto exit_free; + } + + /* Stop here if the classes do not match */ + if (!(adapter->class & driver->class)) + goto exit_free; + + /* Probe entries are done second, and are not affected by ignore + entries either */ + for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) { + if (address_data->probe[i] == adap_id + || address_data->probe[i] == ANY_I2C_BUS) { + dev_dbg(&adapter->dev, "found probe parameter for " + "adapter %d, addr 0x%02x\n", adap_id, + address_data->probe[i + 1]); + temp_client->addr = address_data->probe[i + 1]; + err = i2c_detect_address(temp_client, -1, driver); + if (err) + goto exit_free; + } + } + + /* Normal entries are done last, unless shadowed by an ignore entry */ + for (i = 0; address_data->normal_i2c[i] != I2C_CLIENT_END; i += 1) { + int j, ignore; + + ignore = 0; + for (j = 0; address_data->ignore[j] != I2C_CLIENT_END; + j += 2) { + if ((address_data->ignore[j] == adap_id || + address_data->ignore[j] == ANY_I2C_BUS) + && address_data->ignore[j + 1] + == address_data->normal_i2c[i]) { + dev_dbg(&adapter->dev, "found ignore " + "parameter for adapter %d, " + "addr 0x%02x\n", adap_id, + address_data->ignore[j + 1]); + ignore = 1; + break; + } + } + if (ignore) + continue; + + dev_dbg(&adapter->dev, "found normal entry for adapter %d, " + "addr 0x%02x\n", adap_id, + address_data->normal_i2c[i]); + temp_client->addr = address_data->normal_i2c[i]; + err = i2c_detect_address(temp_client, -1, driver); + if (err) + goto exit_free; + } + + exit_free: + kfree(temp_client); + return err; +} + struct i2c_client * i2c_new_probed_device(struct i2c_adapter *adap, struct i2c_board_info *info, diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 50cbab4b62b0..08be0d21864c 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -45,6 +45,7 @@ struct i2c_adapter; struct i2c_client; struct i2c_driver; union i2c_smbus_data; +struct i2c_board_info; /* * The master routines are the ones normally used to transmit data to devices @@ -94,15 +95,33 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, u8 command, u8 length, const u8 *values); -/* - * A driver is capable of handling one or more physical devices present on - * I2C adapters. This information is used to inform the driver of adapter - * events. +/** + * struct i2c_driver - represent an I2C device driver + * @class: What kind of i2c device we instantiate (for detect) + * @detect: Callback for device detection + * @address_data: The I2C addresses to probe, ignore or force (for detect) + * @clients: List of detected clients we created (for i2c-core use only) * * The driver.owner field should be set to the module owner of this driver. * The driver.name field should be set to the name of this driver. + * + * For automatic device detection, both @detect and @address_data must + * be defined. @class should also be set, otherwise only devices forced + * with module parameters will be created. The detect function must + * fill at least the name field of the i2c_board_info structure it is + * handed upon successful detection, and possibly also the flags field. + * + * If @detect is missing, the driver will still work fine for enumerated + * devices. Detected devices simply won't be supported. This is expected + * for the many I2C/SMBus devices which can't be detected reliably, and + * the ones which can always be enumerated in practice. + * + * The i2c_client structure which is handed to the @detect callback is + * not a real i2c_client. It is initialized just enough so that you can + * call i2c_smbus_read_byte_data and friends on it. Don't do anything + * else with it. In particular, calling dev_dbg and friends on it is + * not allowed. */ - struct i2c_driver { int id; unsigned int class; @@ -142,6 +161,11 @@ struct i2c_driver { struct device_driver driver; const struct i2c_device_id *id_table; + + /* Device detection callback for automatic device creation */ + int (*detect)(struct i2c_client *, int kind, struct i2c_board_info *); + const struct i2c_client_address_data *address_data; + struct list_head clients; }; #define to_i2c_driver(d) container_of(d, struct i2c_driver, driver) @@ -157,6 +181,7 @@ struct i2c_driver { * @dev: Driver model device node for the slave. * @irq: indicates the IRQ generated by this device (if any) * @list: list of active/busy clients (DEPRECATED) + * @detected: member of an i2c_driver.clients list * @released: used to synchronize client releases & detaches and references * * An i2c_client identifies a single device (i.e. chip) connected to an @@ -174,6 +199,7 @@ struct i2c_client { struct device dev; /* the device structure */ int irq; /* irq issued by device */ struct list_head list; /* DEPRECATED */ + struct list_head detected; struct completion released; }; #define to_i2c_client(d) container_of(d, struct i2c_client, dev) -- cgit v1.2.3 From ce7231e92dac381f6e4f9cfdfdf9e0ea055223ad Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Tue, 13 May 2008 13:45:14 -0700 Subject: [PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option This patch adds config option CONFIG_OCFS2_FS_STATS to allow building the fs with instrumentation enabled. An upcoming patch will provide support to instrument cluster locking, which is a crucial overhead in a cluster file system. This config option allows users to avoid the cpu and memory overhead that is involved in gathering such statistics. Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh --- fs/Kconfig | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/Kconfig b/fs/Kconfig index 2694648cbd1b..9c07a4f49e67 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -470,6 +470,14 @@ config OCFS2_FS_USERSPACE_CLUSTER It is safe to say Y, as the clustering method is run-time selectable. +config OCFS2_FS_STATS + bool "OCFS2 statistics" + depends on OCFS2_FS + default y + help + This option allows some fs statistics to be captured. Enabling + this option may increase the memory consumption. + config OCFS2_DEBUG_MASKLOG bool "OCFS2 logging support" depends on OCFS2_FS -- cgit v1.2.3 From 8ddb7b004dfa1832a750e199df8bff4b75b73565 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Tue, 13 May 2008 13:45:15 -0700 Subject: [PATCH 2/2] ocfs2: Instrument fs cluster locks This patch adds code to track the number of times the fs takes various cluster locks as well as the times associated with it. The information is made available to users via debugfs. This patch was originally written by Jan Kara . Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh --- fs/ocfs2/dlmglue.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++++++++- fs/ocfs2/ocfs2.h | 12 ++++++ 2 files changed, 133 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 80e20d9f2780..80537b769e41 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -31,6 +31,7 @@ #include #include #include +#include #define MLOG_MASK_PREFIX ML_DLM_GLUE #include @@ -59,6 +60,9 @@ struct ocfs2_mask_waiter { struct completion mw_complete; unsigned long mw_mask; unsigned long mw_goal; +#ifdef CONFIG_OCFS2_FS_STATS + unsigned long long mw_lock_start; +#endif }; static struct ocfs2_super *ocfs2_get_dentry_osb(struct ocfs2_lock_res *lockres); @@ -366,6 +370,75 @@ static void ocfs2_remove_lockres_tracking(struct ocfs2_lock_res *res) spin_unlock(&ocfs2_dlm_tracking_lock); } +#ifdef CONFIG_OCFS2_FS_STATS +static void ocfs2_init_lock_stats(struct ocfs2_lock_res *res) +{ + res->l_lock_num_prmode = 0; + res->l_lock_num_prmode_failed = 0; + res->l_lock_total_prmode = 0; + res->l_lock_max_prmode = 0; + res->l_lock_num_exmode = 0; + res->l_lock_num_exmode_failed = 0; + res->l_lock_total_exmode = 0; + res->l_lock_max_exmode = 0; + res->l_lock_refresh = 0; +} + +static void ocfs2_update_lock_stats(struct ocfs2_lock_res *res, int level, + struct ocfs2_mask_waiter *mw, int ret) +{ + unsigned long long *num, *sum; + unsigned int *max, *failed; + struct timespec ts = current_kernel_time(); + unsigned long long time = timespec_to_ns(&ts) - mw->mw_lock_start; + + if (level == LKM_PRMODE) { + num = &res->l_lock_num_prmode; + sum = &res->l_lock_total_prmode; + max = &res->l_lock_max_prmode; + failed = &res->l_lock_num_prmode_failed; + } else if (level == LKM_EXMODE) { + num = &res->l_lock_num_exmode; + sum = &res->l_lock_total_exmode; + max = &res->l_lock_max_exmode; + failed = &res->l_lock_num_exmode_failed; + } else + return; + + (*num)++; + (*sum) += time; + if (time > *max) + *max = time; + if (ret) + (*failed)++; +} + +static inline void ocfs2_track_lock_refresh(struct ocfs2_lock_res *lockres) +{ + lockres->l_lock_refresh++; +} + +static inline void ocfs2_init_start_time(struct ocfs2_mask_waiter *mw) +{ + struct timespec ts = current_kernel_time(); + mw->mw_lock_start = timespec_to_ns(&ts); +} +#else +static inline void ocfs2_init_lock_stats(struct ocfs2_lock_res *res) +{ +} +static inline void ocfs2_update_lock_stats(struct ocfs2_lock_res *res, + int level, struct ocfs2_mask_waiter *mw, int ret) +{ +} +static inline void ocfs2_track_lock_refresh(struct ocfs2_lock_res *lockres) +{ +} +static inline void ocfs2_init_start_time(struct ocfs2_mask_waiter *mw) +{ +} +#endif + static void ocfs2_lock_res_init_common(struct ocfs2_super *osb, struct ocfs2_lock_res *res, enum ocfs2_lock_type type, @@ -385,6 +458,8 @@ static void ocfs2_lock_res_init_common(struct ocfs2_super *osb, res->l_flags = OCFS2_LOCK_INITIALIZED; ocfs2_add_lockres_tracking(res, osb->osb_dlm_debug); + + ocfs2_init_lock_stats(res); } void ocfs2_lock_res_init_once(struct ocfs2_lock_res *res) @@ -1048,6 +1123,7 @@ static void ocfs2_init_mask_waiter(struct ocfs2_mask_waiter *mw) { INIT_LIST_HEAD(&mw->mw_item); init_completion(&mw->mw_complete); + ocfs2_init_start_time(mw); } static int ocfs2_wait_for_mask(struct ocfs2_mask_waiter *mw) @@ -1254,6 +1330,7 @@ out: goto again; mlog_errno(ret); } + ocfs2_update_lock_stats(lockres, level, &mw, ret); mlog_exit(ret); return ret; @@ -1983,6 +2060,7 @@ static int ocfs2_inode_lock_update(struct inode *inode, le32_to_cpu(fe->i_flags)); ocfs2_refresh_inode(inode, fe); + ocfs2_track_lock_refresh(lockres); } status = 0; @@ -2267,6 +2345,7 @@ int ocfs2_super_lock(struct ocfs2_super *osb, if (status < 0) mlog_errno(status); + ocfs2_track_lock_refresh(lockres); } bail: mlog_exit(status); @@ -2461,7 +2540,7 @@ static void *ocfs2_dlm_seq_next(struct seq_file *m, void *v, loff_t *pos) } /* So that debugfs.ocfs2 can determine which format is being used */ -#define OCFS2_DLM_DEBUG_STR_VERSION 1 +#define OCFS2_DLM_DEBUG_STR_VERSION 2 static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) { int i; @@ -2502,6 +2581,47 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) for(i = 0; i < DLM_LVB_LEN; i++) seq_printf(m, "0x%x\t", lvb[i]); +#ifdef CONFIG_OCFS2_FS_STATS +# define lock_num_prmode(_l) (_l)->l_lock_num_prmode +# define lock_num_exmode(_l) (_l)->l_lock_num_exmode +# define lock_num_prmode_failed(_l) (_l)->l_lock_num_prmode_failed +# define lock_num_exmode_failed(_l) (_l)->l_lock_num_exmode_failed +# define lock_total_prmode(_l) (_l)->l_lock_total_prmode +# define lock_total_exmode(_l) (_l)->l_lock_total_exmode +# define lock_max_prmode(_l) (_l)->l_lock_max_prmode +# define lock_max_exmode(_l) (_l)->l_lock_max_exmode +# define lock_refresh(_l) (_l)->l_lock_refresh +#else +# define lock_num_prmode(_l) (0) +# define lock_num_exmode(_l) (0) +# define lock_num_prmode_failed(_l) (0) +# define lock_num_exmode_failed(_l) (0) +# define lock_total_prmode(_l) (0) +# define lock_total_exmode(_l) (0) +# define lock_max_prmode(_l) (0) +# define lock_max_exmode(_l) (0) +# define lock_refresh(_l) (0) +#endif + /* The following seq_print was added in version 2 of this output */ + seq_printf(m, "%llu\t" + "%llu\t" + "%u\t" + "%u\t" + "%llu\t" + "%llu\t" + "%u\t" + "%u\t" + "%u\t", + lock_num_prmode(lockres), + lock_num_exmode(lockres), + lock_num_prmode_failed(lockres), + lock_num_exmode_failed(lockres), + lock_total_prmode(lockres), + lock_total_exmode(lockres), + lock_max_prmode(lockres), + lock_max_exmode(lockres), + lock_refresh(lockres)); + /* End the line */ seq_printf(m, "\n"); return 0; diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 31692379c170..1cb814be8ef1 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -132,6 +132,18 @@ struct ocfs2_lock_res { wait_queue_head_t l_event; struct list_head l_debug_list; + +#ifdef CONFIG_OCFS2_FS_STATS + unsigned long long l_lock_num_prmode; /* PR acquires */ + unsigned long long l_lock_num_exmode; /* EX acquires */ + unsigned int l_lock_num_prmode_failed; /* Failed PR gets */ + unsigned int l_lock_num_exmode_failed; /* Failed EX gets */ + unsigned long long l_lock_total_prmode; /* Tot wait for PR */ + unsigned long long l_lock_total_exmode; /* Tot wait for EX */ + unsigned int l_lock_max_prmode; /* Max wait for PR */ + unsigned int l_lock_max_exmode; /* Max wait for EX */ + unsigned int l_lock_refresh; /* Disk refreshes */ +#endif }; struct ocfs2_dlm_debug { -- cgit v1.2.3 From dd25e55ea133b14678cfaa9e205b082b24b26dbc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 28 May 2008 14:41:00 -0700 Subject: ocfs2: fix printk format warnings with OCFS2_FS_STATS=n Fix printk format warnings when OCFS2_FS_STATS=n: linux-next-20080528/fs/ocfs2/dlmglue.c: In function 'ocfs2_dlm_seq_show': linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'int' linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 4 has type 'int' linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 7 has type 'int' linux-next-20080528/fs/ocfs2/dlmglue.c:2623: warning: format '%llu' expects type 'long long unsigned int', but argument 8 has type 'int' Signed-off-by: Randy Dunlap Signed-off-by: Mark Fasheh --- fs/ocfs2/dlmglue.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 80537b769e41..eae3d643a5e4 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -2592,12 +2592,12 @@ static int ocfs2_dlm_seq_show(struct seq_file *m, void *v) # define lock_max_exmode(_l) (_l)->l_lock_max_exmode # define lock_refresh(_l) (_l)->l_lock_refresh #else -# define lock_num_prmode(_l) (0) -# define lock_num_exmode(_l) (0) +# define lock_num_prmode(_l) (0ULL) +# define lock_num_exmode(_l) (0ULL) # define lock_num_prmode_failed(_l) (0) # define lock_num_exmode_failed(_l) (0) -# define lock_total_prmode(_l) (0) -# define lock_total_exmode(_l) (0) +# define lock_total_prmode(_l) (0ULL) +# define lock_total_exmode(_l) (0ULL) # define lock_max_prmode(_l) (0) # define lock_max_exmode(_l) (0) # define lock_refresh(_l) (0) -- cgit v1.2.3 From 7600c72b75bab374ad39b2a4799a0728579a8e2f Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 9 Jun 2008 16:34:23 -0700 Subject: ocfs2: use simple_read_from_buffer() Signed-off-by: Akinobu Mita Acked-by: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Mark Fasheh --- fs/ocfs2/stack_user.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c index c021280dd462..24e0b19c8b69 100644 --- a/fs/ocfs2/stack_user.c +++ b/fs/ocfs2/stack_user.c @@ -549,26 +549,17 @@ static ssize_t ocfs2_control_read(struct file *file, size_t count, loff_t *ppos) { - char *proto_string = OCFS2_CONTROL_PROTO; - size_t to_write = 0; - - if (*ppos >= OCFS2_CONTROL_PROTO_LEN) - return 0; - - to_write = OCFS2_CONTROL_PROTO_LEN - *ppos; - if (to_write > count) - to_write = count; - if (copy_to_user(buf, proto_string + *ppos, to_write)) - return -EFAULT; + ssize_t ret; - *ppos += to_write; + ret = simple_read_from_buffer(buf, count, ppos, + OCFS2_CONTROL_PROTO, OCFS2_CONTROL_PROTO_LEN); /* Have we read the whole protocol list? */ - if (*ppos >= OCFS2_CONTROL_PROTO_LEN) + if (ret > 0 && *ppos >= OCFS2_CONTROL_PROTO_LEN) ocfs2_control_set_handshake_state(file, OCFS2_CONTROL_HANDSHAKE_READ); - return to_write; + return ret; } static int ocfs2_control_release(struct inode *inode, struct file *file) -- cgit v1.2.3 From 56753bd3b9220f6f2477eb1cf97f40c24e0a4c91 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 9 Jun 2008 11:24:41 -0700 Subject: ocfs2: Silence an error message in ocfs2_file_aio_read() This patch silences an EINVAL error message in ocfs2_file_aio_read() that is always due to a user error. Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh --- fs/ocfs2/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 57e0d30cde98..e8514e8b6ce8 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -2202,7 +2202,7 @@ static ssize_t ocfs2_file_aio_read(struct kiocb *iocb, ret = generic_file_aio_read(iocb, iov, nr_segs, iocb->ki_pos); if (ret == -EINVAL) - mlog(ML_ERROR, "generic_file_aio_read returned -EINVAL\n"); + mlog(0, "generic_file_aio_read returned -EINVAL\n"); /* buffered aio wouldn't have proper lock coverage today */ BUG_ON(ret == -EIOCBQUEUED && !(filp->f_flags & O_DIRECT)); -- cgit v1.2.3 From 01af482037d32c215aab208a0b110ffe6fd782c0 Mon Sep 17 00:00:00 2001 From: Wengang Wang Date: Tue, 10 Jun 2008 14:24:48 +0800 Subject: ocfs2: Handle error during journal load This patch ensures the mount fails if the fs is unable to load the journal. Signed-off-by: Wengang Wang Acked-by: Sunil Mushran Signed-off-by: Mark Fasheh --- fs/ocfs2/super.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index df63ba20ae90..ccecfe5094fa 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1703,7 +1703,11 @@ static int ocfs2_check_volume(struct ocfs2_super *osb) local = ocfs2_mount_local(osb); /* will play back anything left in the journal. */ - ocfs2_journal_load(osb->journal, local); + status = ocfs2_journal_load(osb->journal, local); + if (status < 0) { + mlog(ML_ERROR, "ocfs2 journal load failed! %d\n", status); + goto finally; + } if (dirty) { /* recover my local alloc if we didn't unmount cleanly. */ -- cgit v1.2.3 From 461c6a30eca6f25add1dadb9fd8a1d8e89a6e627 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 19 May 2008 16:23:37 -0700 Subject: ocfs2/net: Silence build warnings on sparc64 suseconds_t is type long on most arches except sparc64 where it is type int. This patch silences the following warnings that are generated when building on it. netdebug.c: In function 'nst_seq_show': netdebug.c:152: warning: format '%lu' expects type 'long unsigned int', but argument 13 has type 'suseconds_t' netdebug.c:152: warning: format '%lu' expects type 'long unsigned int', but argument 15 has type 'suseconds_t' netdebug.c:152: warning: format '%lu' expects type 'long unsigned int', but argument 17 has type 'suseconds_t' netdebug.c: In function 'sc_seq_show': netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 19 has type 'suseconds_t' netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 21 has type 'suseconds_t' netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 23 has type 'suseconds_t' netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 25 has type 'suseconds_t' netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 27 has type 'suseconds_t' netdebug.c:332: warning: format '%lu' expects type 'long unsigned int', but argument 29 has type 'suseconds_t' Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh --- fs/ocfs2/cluster/netdebug.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/ocfs2/cluster/netdebug.c b/fs/ocfs2/cluster/netdebug.c index 7bf3c0ea7bd9..d8bfa0eb41b2 100644 --- a/fs/ocfs2/cluster/netdebug.c +++ b/fs/ocfs2/cluster/netdebug.c @@ -146,8 +146,10 @@ static int nst_seq_show(struct seq_file *seq, void *v) nst->st_task->comm, nst->st_node, nst->st_sc, nst->st_id, nst->st_msg_type, nst->st_msg_key, - nst->st_sock_time.tv_sec, nst->st_sock_time.tv_usec, - nst->st_send_time.tv_sec, nst->st_send_time.tv_usec, + nst->st_sock_time.tv_sec, + (unsigned long)nst->st_sock_time.tv_usec, + nst->st_send_time.tv_sec, + (unsigned long)nst->st_send_time.tv_usec, nst->st_status_time.tv_sec, nst->st_status_time.tv_usec); } @@ -274,7 +276,7 @@ static void *sc_seq_next(struct seq_file *seq, void *v, loff_t *pos) return sc; /* unused, just needs to be null when done */ } -#define TV_SEC_USEC(TV) TV.tv_sec, TV.tv_usec +#define TV_SEC_USEC(TV) TV.tv_sec, (unsigned long)TV.tv_usec static int sc_seq_show(struct seq_file *seq, void *v) { -- cgit v1.2.3 From e407e39783a7206d20b3e9961aedf272de966e31 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Thu, 12 Jun 2008 22:35:39 -0700 Subject: ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs A couple places use OCFS2_DEBUG_FS where they really mean CONFIG_OCFS2_DEBUG_FS. Reported-by: Robert P. J. Day Signed-off-by: Joel Becker --- fs/ocfs2/journal.c | 2 +- fs/ocfs2/localalloc.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c index 9698338adc39..a8c19cb3cfdd 100644 --- a/fs/ocfs2/journal.c +++ b/fs/ocfs2/journal.c @@ -329,7 +329,7 @@ int ocfs2_extend_trans(handle_t *handle, int nblocks) mlog(0, "Trying to extend transaction by %d blocks\n", nblocks); -#ifdef OCFS2_DEBUG_FS +#ifdef CONFIG_OCFS2_DEBUG_FS status = 1; #else status = journal_extend(handle, nblocks); diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c index be774bdc8b36..28e492e4ec88 100644 --- a/fs/ocfs2/localalloc.c +++ b/fs/ocfs2/localalloc.c @@ -498,7 +498,7 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb, alloc = (struct ocfs2_dinode *) osb->local_alloc_bh->b_data; -#ifdef OCFS2_DEBUG_FS +#ifdef CONFIG_OCFS2_DEBUG_FS if (le32_to_cpu(alloc->id1.bitmap1.i_used) != ocfs2_local_alloc_count_bits(alloc)) { ocfs2_error(osb->sb, "local alloc inode %llu says it has " -- cgit v1.2.3 From fe9f387740ac7cb3b7c2fffa76807e997e6c6292 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Thu, 12 Jun 2008 22:39:18 -0700 Subject: ocfs2: Don't snprintf() without a format. Some system files are per-slot. Their names include the slot number. ocfs2_sprintf_system_inode_name() uses the system inode definitions to fill in the slot number with snprintf(). For global system files, there is no node number, and the name was printed as a format with no arguments. -Wformat-nonliteral and -Wformat-security don't like this. Instead, use a static "%s" format and the name as the argument. Signed-off-by: Joel Becker --- fs/ocfs2/ocfs2_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h index 52c426665154..3f1945177629 100644 --- a/fs/ocfs2/ocfs2_fs.h +++ b/fs/ocfs2/ocfs2_fs.h @@ -901,7 +901,7 @@ static inline int ocfs2_sprintf_system_inode_name(char *buf, int len, * list has a copy per slot. */ if (type <= OCFS2_LAST_GLOBAL_SYSTEM_INODE) - chars = snprintf(buf, len, + chars = snprintf(buf, len, "%s", ocfs2_system_inodes[type].si_name); else chars = snprintf(buf, len, -- cgit v1.2.3 From 6f61076406251626be39651d114fac412b1e0c39 Mon Sep 17 00:00:00 2001 From: Louis Rilling Date: Mon, 16 Jun 2008 19:00:58 +0200 Subject: configfs: Introduce configfs_dirent_lock This patch introduces configfs_dirent_lock spinlock to protect configfs_dirent traversals against linkage mutations (add/del/move). This will allow configfs_detach_prep() to avoid locking i_mutexes. Locking rules for configfs_dirent linkage mutations are the same plus the requirement of taking configfs_dirent_lock. For configfs_dirent walking, one can either take appropriate i_mutex as before, or take configfs_dirent_lock. The spinlock could actually be a mutex, but the critical sections are either O(1) or should not be too long (default groups walking in last patch). ChangeLog: - Clarify the comment on configfs_dirent_lock usage - Move sd->s_element init before linking the new dirent - In lseek(), do not release configfs_dirent_lock before the dirent is relinked. Signed-off-by: Louis Rilling Signed-off-by: Joel Becker --- fs/configfs/configfs_internal.h | 3 +++ fs/configfs/dir.c | 28 +++++++++++++++++++++++++++- fs/configfs/inode.c | 2 ++ fs/configfs/symlink.c | 2 ++ 4 files changed, 34 insertions(+), 1 deletion(-) diff --git a/fs/configfs/configfs_internal.h b/fs/configfs/configfs_internal.h index cca98609aa7f..5a33b58e66da 100644 --- a/fs/configfs/configfs_internal.h +++ b/fs/configfs/configfs_internal.h @@ -26,6 +26,7 @@ #include #include +#include struct configfs_dirent { atomic_t s_count; @@ -49,6 +50,8 @@ struct configfs_dirent { #define CONFIGFS_USET_DROPPING 0x0100 #define CONFIGFS_NOT_PINNED (CONFIGFS_ITEM_ATTR) +extern spinlock_t configfs_dirent_lock; + extern struct vfsmount * configfs_mount; extern struct kmem_cache *configfs_dir_cachep; diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index a48dc7dd8765..2619f485bc3d 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -35,6 +35,14 @@ #include "configfs_internal.h" DECLARE_RWSEM(configfs_rename_sem); +/* + * Protects mutations of configfs_dirent linkage together with proper i_mutex + * Mutators of configfs_dirent linkage must *both* have the proper inode locked + * and configfs_dirent_lock locked, in that order. + * This allows one to safely traverse configfs_dirent trees without having to + * lock inodes. + */ +DEFINE_SPINLOCK(configfs_dirent_lock); static void configfs_d_iput(struct dentry * dentry, struct inode * inode) @@ -79,8 +87,10 @@ static struct configfs_dirent *configfs_new_dirent(struct configfs_dirent * pare atomic_set(&sd->s_count, 1); INIT_LIST_HEAD(&sd->s_links); INIT_LIST_HEAD(&sd->s_children); - list_add(&sd->s_sibling, &parent_sd->s_children); sd->s_element = element; + spin_lock(&configfs_dirent_lock); + list_add(&sd->s_sibling, &parent_sd->s_children); + spin_unlock(&configfs_dirent_lock); return sd; } @@ -173,7 +183,9 @@ static int create_dir(struct config_item * k, struct dentry * p, } else { struct configfs_dirent *sd = d->d_fsdata; if (sd) { + spin_lock(&configfs_dirent_lock); list_del_init(&sd->s_sibling); + spin_unlock(&configfs_dirent_lock); configfs_put(sd); } } @@ -224,7 +236,9 @@ int configfs_create_link(struct configfs_symlink *sl, else { struct configfs_dirent *sd = dentry->d_fsdata; if (sd) { + spin_lock(&configfs_dirent_lock); list_del_init(&sd->s_sibling); + spin_unlock(&configfs_dirent_lock); configfs_put(sd); } } @@ -238,7 +252,9 @@ static void remove_dir(struct dentry * d) struct configfs_dirent * sd; sd = d->d_fsdata; + spin_lock(&configfs_dirent_lock); list_del_init(&sd->s_sibling); + spin_unlock(&configfs_dirent_lock); configfs_put(sd); if (d->d_inode) simple_rmdir(parent->d_inode,d); @@ -410,7 +426,9 @@ static void detach_attrs(struct config_item * item) list_for_each_entry_safe(sd, tmp, &parent_sd->s_children, s_sibling) { if (!sd->s_element || !(sd->s_type & CONFIGFS_NOT_PINNED)) continue; + spin_lock(&configfs_dirent_lock); list_del_init(&sd->s_sibling); + spin_unlock(&configfs_dirent_lock); configfs_drop_dentry(sd, dentry); configfs_put(sd); } @@ -1268,7 +1286,9 @@ static int configfs_dir_close(struct inode *inode, struct file *file) struct configfs_dirent * cursor = file->private_data; mutex_lock(&dentry->d_inode->i_mutex); + spin_lock(&configfs_dirent_lock); list_del_init(&cursor->s_sibling); + spin_unlock(&configfs_dirent_lock); mutex_unlock(&dentry->d_inode->i_mutex); release_configfs_dirent(cursor); @@ -1308,7 +1328,9 @@ static int configfs_readdir(struct file * filp, void * dirent, filldir_t filldir /* fallthrough */ default: if (filp->f_pos == 2) { + spin_lock(&configfs_dirent_lock); list_move(q, &parent_sd->s_children); + spin_unlock(&configfs_dirent_lock); } for (p=q->next; p!= &parent_sd->s_children; p=p->next) { struct configfs_dirent *next; @@ -1331,7 +1353,9 @@ static int configfs_readdir(struct file * filp, void * dirent, filldir_t filldir dt_type(next)) < 0) return 0; + spin_lock(&configfs_dirent_lock); list_move(q, p); + spin_unlock(&configfs_dirent_lock); p = q; filp->f_pos++; } @@ -1362,6 +1386,7 @@ static loff_t configfs_dir_lseek(struct file * file, loff_t offset, int origin) struct list_head *p; loff_t n = file->f_pos - 2; + spin_lock(&configfs_dirent_lock); list_del(&cursor->s_sibling); p = sd->s_children.next; while (n && p != &sd->s_children) { @@ -1373,6 +1398,7 @@ static loff_t configfs_dir_lseek(struct file * file, loff_t offset, int origin) p = p->next; } list_add_tail(&cursor->s_sibling, p); + spin_unlock(&configfs_dirent_lock); } } mutex_unlock(&dentry->d_inode->i_mutex); diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c index b9a1d810346d..4803ccc94480 100644 --- a/fs/configfs/inode.c +++ b/fs/configfs/inode.c @@ -247,7 +247,9 @@ void configfs_hash_and_remove(struct dentry * dir, const char * name) if (!sd->s_element) continue; if (!strcmp(configfs_get_name(sd), name)) { + spin_lock(&configfs_dirent_lock); list_del_init(&sd->s_sibling); + spin_unlock(&configfs_dirent_lock); configfs_drop_dentry(sd, dir); configfs_put(sd); break; diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c index 2a731ef5f305..676c84c416da 100644 --- a/fs/configfs/symlink.c +++ b/fs/configfs/symlink.c @@ -169,7 +169,9 @@ int configfs_unlink(struct inode *dir, struct dentry *dentry) parent_item = configfs_get_config_item(dentry->d_parent); type = parent_item->ci_type; + spin_lock(&configfs_dirent_lock); list_del_init(&sd->s_sibling); + spin_unlock(&configfs_dirent_lock); configfs_drop_dentry(sd, dentry->d_parent); dput(dentry); configfs_put(sd); -- cgit v1.2.3 From 5301a77da2da1e4c22573e0e8d394a653b8ad9f9 Mon Sep 17 00:00:00 2001 From: Louis Rilling Date: Mon, 16 Jun 2008 19:00:59 +0200 Subject: configfs: Protect configfs_dirent s_links list mutations Symlinks to a config_item are listed under its configfs_dirent s_links, but the list mutations are not protected by any common lock. This patch uses the configfs_dirent_lock spinlock to add the necessary protection. Note: we should also protect the list_empty() test in configfs_detach_prep() but 1/ the lock should not be released immediately because nothing would prevent the list from being filled after a successful list_empty() test, making the problem tricky, 2/ this will be solved by the rmdir() vs rename() deadlock bugfix. Signed-off-by: Louis Rilling Signed-off-by: Joel Becker --- fs/configfs/dir.c | 5 +++-- fs/configfs/symlink.c | 8 ++++++-- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index 2619f485bc3d..a08e5c2f25e8 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -37,10 +37,11 @@ DECLARE_RWSEM(configfs_rename_sem); /* * Protects mutations of configfs_dirent linkage together with proper i_mutex + * Also protects mutations of symlinks linkage to target configfs_dirent * Mutators of configfs_dirent linkage must *both* have the proper inode locked * and configfs_dirent_lock locked, in that order. - * This allows one to safely traverse configfs_dirent trees without having to - * lock inodes. + * This allows one to safely traverse configfs_dirent trees and symlinks without + * having to lock inodes. */ DEFINE_SPINLOCK(configfs_dirent_lock); diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c index 676c84c416da..faeb4417a10d 100644 --- a/fs/configfs/symlink.c +++ b/fs/configfs/symlink.c @@ -77,12 +77,15 @@ static int create_link(struct config_item *parent_item, sl = kmalloc(sizeof(struct configfs_symlink), GFP_KERNEL); if (sl) { sl->sl_target = config_item_get(item); - /* FIXME: needs a lock, I'd bet */ + spin_lock(&configfs_dirent_lock); list_add(&sl->sl_list, &target_sd->s_links); + spin_unlock(&configfs_dirent_lock); ret = configfs_create_link(sl, parent_item->ci_dentry, dentry); if (ret) { + spin_lock(&configfs_dirent_lock); list_del_init(&sl->sl_list); + spin_unlock(&configfs_dirent_lock); config_item_put(item); kfree(sl); } @@ -186,8 +189,9 @@ int configfs_unlink(struct inode *dir, struct dentry *dentry) type->ct_item_ops->drop_link(parent_item, sl->sl_target); - /* FIXME: Needs lock */ + spin_lock(&configfs_dirent_lock); list_del_init(&sl->sl_list); + spin_unlock(&configfs_dirent_lock); /* Put reference from create_link() */ config_item_put(sl->sl_target); -- cgit v1.2.3 From 107ed40bd070df5e4a0a012042c45c40963dc574 Mon Sep 17 00:00:00 2001 From: Louis Rilling Date: Mon, 16 Jun 2008 19:01:00 +0200 Subject: configfs: Make configfs_new_dirent() return error code instead of NULL This patch makes configfs_new_dirent return negative error code instead of NULL, which will be useful in the next patch to differentiate ENOMEM from ENOENT. Signed-off-by: Louis Rilling Signed-off-by: Joel Becker --- fs/configfs/dir.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index a08e5c2f25e8..918a332babfe 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include "configfs_internal.h" @@ -83,7 +84,7 @@ static struct configfs_dirent *configfs_new_dirent(struct configfs_dirent * pare sd = kmem_cache_zalloc(configfs_dir_cachep, GFP_KERNEL); if (!sd) - return NULL; + return ERR_PTR(-ENOMEM); atomic_set(&sd->s_count, 1); INIT_LIST_HEAD(&sd->s_links); @@ -129,8 +130,8 @@ int configfs_make_dirent(struct configfs_dirent * parent_sd, struct configfs_dirent * sd; sd = configfs_new_dirent(parent_sd, element); - if (!sd) - return -ENOMEM; + if (IS_ERR(sd)) + return PTR_ERR(sd); sd->s_mode = mode; sd->s_type = type; @@ -1277,7 +1278,7 @@ static int configfs_dir_open(struct inode *inode, struct file *file) file->private_data = configfs_new_dirent(parent_sd, NULL); mutex_unlock(&dentry->d_inode->i_mutex); - return file->private_data ? 0 : -ENOMEM; + return IS_ERR(file->private_data) ? PTR_ERR(file->private_data) : 0; } -- cgit v1.2.3 From b3e76af87441fc36eef3516d73ab2314e7b2d911 Mon Sep 17 00:00:00 2001 From: Louis Rilling Date: Mon, 16 Jun 2008 19:01:01 +0200 Subject: configfs: Fix deadlock with racing rmdir() and rename() This patch fixes the deadlock between racing sys_rename() and configfs_rmdir(). The idea is to avoid locking i_mutexes of default groups in configfs_detach_prep(), and rely instead on the new configfs_dirent_lock to protect against configfs_dirent's linkage mutations. To ensure that an mkdir() racing with rmdir() will not create new items in a to-be-removed default group, we make configfs_new_dirent() check for the CONFIGFS_USET_DROPPING flag right before linking the new dirent, and return error if the flag is set. This makes racing mkdir()/symlink()/dir_open() fail in places where errors could already happen, resp. in (attach_item()|attach_group())/create_link()/new_dirent(). configfs_depend() remains safe since it locks all the path from configfs root, and is thus mutually exclusive with rmdir(). An advantage of this is that now detach_groups() unconditionnaly takes the default groups i_mutex, which makes it more consistent with populate_groups(). Signed-off-by: Louis Rilling Signed-off-by: Joel Becker --- fs/configfs/dir.c | 45 +++++++++++++++++++++++++-------------------- 1 file changed, 25 insertions(+), 20 deletions(-) diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index 918a332babfe..d5b5985716ba 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -43,6 +43,10 @@ DECLARE_RWSEM(configfs_rename_sem); * and configfs_dirent_lock locked, in that order. * This allows one to safely traverse configfs_dirent trees and symlinks without * having to lock inodes. + * + * Protects setting of CONFIGFS_USET_DROPPING: checking the flag + * unlocked is not reliable unless in detach_groups() called from + * rmdir()/unregister() and from configfs_attach_group() */ DEFINE_SPINLOCK(configfs_dirent_lock); @@ -91,6 +95,11 @@ static struct configfs_dirent *configfs_new_dirent(struct configfs_dirent * pare INIT_LIST_HEAD(&sd->s_children); sd->s_element = element; spin_lock(&configfs_dirent_lock); + if (parent_sd->s_type & CONFIGFS_USET_DROPPING) { + spin_unlock(&configfs_dirent_lock); + kmem_cache_free(configfs_dir_cachep, sd); + return ERR_PTR(-ENOENT); + } list_add(&sd->s_sibling, &parent_sd->s_children); spin_unlock(&configfs_dirent_lock); @@ -349,11 +358,11 @@ static struct dentry * configfs_lookup(struct inode *dir, /* * Only subdirectories count here. Files (CONFIGFS_NOT_PINNED) are - * attributes and are removed by rmdir(). We recurse, taking i_mutex - * on all children that are candidates for default detach. If the - * result is clean, then configfs_detach_group() will handle dropping - * i_mutex. If there is an error, the caller will clean up the i_mutex - * holders via configfs_detach_rollback(). + * attributes and are removed by rmdir(). We recurse, setting + * CONFIGFS_USET_DROPPING on all children that are candidates for + * default detach. + * If there is an error, the caller will reset the flags via + * configfs_detach_rollback(). */ static int configfs_detach_prep(struct dentry *dentry) { @@ -370,8 +379,7 @@ static int configfs_detach_prep(struct dentry *dentry) if (sd->s_type & CONFIGFS_NOT_PINNED) continue; if (sd->s_type & CONFIGFS_USET_DEFAULT) { - mutex_lock(&sd->s_dentry->d_inode->i_mutex); - /* Mark that we've taken i_mutex */ + /* Mark that we're trying to drop the group */ sd->s_type |= CONFIGFS_USET_DROPPING; /* @@ -392,7 +400,7 @@ out: } /* - * Walk the tree, dropping i_mutex wherever CONFIGFS_USET_DROPPING is + * Walk the tree, resetting CONFIGFS_USET_DROPPING wherever it was * set. */ static void configfs_detach_rollback(struct dentry *dentry) @@ -403,11 +411,7 @@ static void configfs_detach_rollback(struct dentry *dentry) list_for_each_entry(sd, &parent_sd->s_children, s_sibling) { if (sd->s_type & CONFIGFS_USET_DEFAULT) { configfs_detach_rollback(sd->s_dentry); - - if (sd->s_type & CONFIGFS_USET_DROPPING) { - sd->s_type &= ~CONFIGFS_USET_DROPPING; - mutex_unlock(&sd->s_dentry->d_inode->i_mutex); - } + sd->s_type &= ~CONFIGFS_USET_DROPPING; } } } @@ -486,16 +490,12 @@ static void detach_groups(struct config_group *group) child = sd->s_dentry; + mutex_lock(&child->d_inode->i_mutex); + configfs_detach_group(sd->s_element); child->d_inode->i_flags |= S_DEAD; - /* - * From rmdir/unregister, a configfs_detach_prep() pass - * has taken our i_mutex for us. Drop it. - * From mkdir/register cleanup, there is no sem held. - */ - if (sd->s_type & CONFIGFS_USET_DROPPING) - mutex_unlock(&child->d_inode->i_mutex); + mutex_unlock(&child->d_inode->i_mutex); d_delete(child); dput(child); @@ -1181,12 +1181,15 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry) return -EINVAL; } + spin_lock(&configfs_dirent_lock); ret = configfs_detach_prep(dentry); if (ret) { configfs_detach_rollback(dentry); + spin_unlock(&configfs_dirent_lock); config_item_put(parent_item); return ret; } + spin_unlock(&configfs_dirent_lock); /* Get a working ref for the duration of this function */ item = configfs_get_config_item(dentry); @@ -1476,9 +1479,11 @@ void configfs_unregister_subsystem(struct configfs_subsystem *subsys) mutex_lock_nested(&configfs_sb->s_root->d_inode->i_mutex, I_MUTEX_PARENT); mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD); + spin_lock(&configfs_dirent_lock); if (configfs_detach_prep(dentry)) { printk(KERN_ERR "configfs: Tried to unregister non-empty subsystem!\n"); } + spin_unlock(&configfs_dirent_lock); configfs_detach_group(&group->cg_item); dentry->d_inode->i_flags |= S_DEAD; mutex_unlock(&dentry->d_inode->i_mutex); -- cgit v1.2.3 From 6d8344baee99402de58b5fa5dfea197242955c15 Mon Sep 17 00:00:00 2001 From: Louis Rilling Date: Mon, 16 Jun 2008 19:01:02 +0200 Subject: configfs: Fix failing mkdir() making racing rmdir() fail When fixing the rename() vs rmdir() deadlock, we stopped locking default groups' inodes in configfs_detach_prep(), letting racing mkdir() in default groups proceed concurrently. This enables races like below happen, which leads to a failing mkdir() making rmdir() fail, despite the group to remove having no user-created directory under it in the end. process A: process B: /* PWD=A/B */ mkdir("C") make_item("C") attach_group("C") rmdir("A") detach_prep("A") detach_prep("B") error because of "C" return -ENOTEMPTY attach_group("C/D") error (eg -ENOMEM) return -ENOMEM This patch prevents such scenarii by making rmdir() wait as long as detach_prep() fails because a racing mkdir() is in the middle of attach_group(). To achieve this, mkdir() sets a flag CONFIGFS_USET_IN_MKDIR in parent's configfs_dirent before calling attach_group(), and clears the flag once attach_group() is done. detach_prep() fails with -EAGAIN whenever the flag is hit and returns the guilty inode's mutex so that rmdir() can wait on it. Signed-off-by: Louis Rilling Signed-off-by: Joel Becker --- fs/configfs/configfs_internal.h | 1 + fs/configfs/dir.c | 53 +++++++++++++++++++++++++++++++++-------- 2 files changed, 44 insertions(+), 10 deletions(-) diff --git a/fs/configfs/configfs_internal.h b/fs/configfs/configfs_internal.h index 5a33b58e66da..da015c12e3ea 100644 --- a/fs/configfs/configfs_internal.h +++ b/fs/configfs/configfs_internal.h @@ -48,6 +48,7 @@ struct configfs_dirent { #define CONFIGFS_USET_DIR 0x0040 #define CONFIGFS_USET_DEFAULT 0x0080 #define CONFIGFS_USET_DROPPING 0x0100 +#define CONFIGFS_USET_IN_MKDIR 0x0200 #define CONFIGFS_NOT_PINNED (CONFIGFS_ITEM_ATTR) extern spinlock_t configfs_dirent_lock; diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index d5b5985716ba..614e382a6049 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -364,7 +364,7 @@ static struct dentry * configfs_lookup(struct inode *dir, * If there is an error, the caller will reset the flags via * configfs_detach_rollback(). */ -static int configfs_detach_prep(struct dentry *dentry) +static int configfs_detach_prep(struct dentry *dentry, struct mutex **wait_mutex) { struct configfs_dirent *parent_sd = dentry->d_fsdata; struct configfs_dirent *sd; @@ -379,6 +379,12 @@ static int configfs_detach_prep(struct dentry *dentry) if (sd->s_type & CONFIGFS_NOT_PINNED) continue; if (sd->s_type & CONFIGFS_USET_DEFAULT) { + /* Abort if racing with mkdir() */ + if (sd->s_type & CONFIGFS_USET_IN_MKDIR) { + if (wait_mutex) + *wait_mutex = &sd->s_dentry->d_inode->i_mutex; + return -EAGAIN; + } /* Mark that we're trying to drop the group */ sd->s_type |= CONFIGFS_USET_DROPPING; @@ -386,7 +392,7 @@ static int configfs_detach_prep(struct dentry *dentry) * Yup, recursive. If there's a problem, blame * deep nesting of default_groups */ - ret = configfs_detach_prep(sd->s_dentry); + ret = configfs_detach_prep(sd->s_dentry, wait_mutex); if (!ret) continue; } else @@ -1113,11 +1119,26 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) */ module_got = 1; + /* + * Make racing rmdir() fail if it did not tag parent with + * CONFIGFS_USET_DROPPING + * Note: if CONFIGFS_USET_DROPPING is already set, attach_group() will + * fail and let rmdir() terminate correctly + */ + spin_lock(&configfs_dirent_lock); + /* This will make configfs_detach_prep() fail */ + sd->s_type |= CONFIGFS_USET_IN_MKDIR; + spin_unlock(&configfs_dirent_lock); + if (group) ret = configfs_attach_group(parent_item, item, dentry); else ret = configfs_attach_item(parent_item, item, dentry); + spin_lock(&configfs_dirent_lock); + sd->s_type &= ~CONFIGFS_USET_IN_MKDIR; + spin_unlock(&configfs_dirent_lock); + out_unlink: if (ret) { /* Tear down everything we built up */ @@ -1182,13 +1203,25 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry) } spin_lock(&configfs_dirent_lock); - ret = configfs_detach_prep(dentry); - if (ret) { - configfs_detach_rollback(dentry); - spin_unlock(&configfs_dirent_lock); - config_item_put(parent_item); - return ret; - } + do { + struct mutex *wait_mutex; + + ret = configfs_detach_prep(dentry, &wait_mutex); + if (ret) { + configfs_detach_rollback(dentry); + spin_unlock(&configfs_dirent_lock); + if (ret != -EAGAIN) { + config_item_put(parent_item); + return ret; + } + + /* Wait until the racing operation terminates */ + mutex_lock(wait_mutex); + mutex_unlock(wait_mutex); + + spin_lock(&configfs_dirent_lock); + } + } while (ret == -EAGAIN); spin_unlock(&configfs_dirent_lock); /* Get a working ref for the duration of this function */ @@ -1480,7 +1513,7 @@ void configfs_unregister_subsystem(struct configfs_subsystem *subsys) I_MUTEX_PARENT); mutex_lock_nested(&dentry->d_inode->i_mutex, I_MUTEX_CHILD); spin_lock(&configfs_dirent_lock); - if (configfs_detach_prep(dentry)) { + if (configfs_detach_prep(dentry, NULL)) { printk(KERN_ERR "configfs: Tried to unregister non-empty subsystem!\n"); } spin_unlock(&configfs_dirent_lock); -- cgit v1.2.3 From 11c3b79218390a139f2d474ee1e983a672d5839a Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Thu, 12 Jun 2008 14:00:18 -0700 Subject: configfs: Allow ->make_item() and ->make_group() to return detailed errors. The configfs operations ->make_item() and ->make_group() currently return a new item/group. A return of NULL signifies an error. Because of this, -ENOMEM is the only return code bubbled up the stack. Multiple folks have requested the ability to return specific error codes when these operations fail. This patch adds that ability by changing the ->make_item/group() ops to return an int. Also updated are the in-kernel users of configfs. Signed-off-by: Joel Becker --- Documentation/filesystems/configfs/configfs.txt | 10 +++-- .../filesystems/configfs/configfs_example.c | 14 ++++--- drivers/net/netconsole.c | 10 +++-- fs/configfs/dir.c | 13 +++---- fs/dlm/config.c | 45 ++++++++++++++-------- fs/ocfs2/cluster/heartbeat.c | 17 ++++---- fs/ocfs2/cluster/nodemanager.c | 45 ++++++++++++++-------- include/linux/configfs.h | 4 +- 8 files changed, 94 insertions(+), 64 deletions(-) diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt index 44c97e6accb2..15838d706ea2 100644 --- a/Documentation/filesystems/configfs/configfs.txt +++ b/Documentation/filesystems/configfs/configfs.txt @@ -233,10 +233,12 @@ accomplished via the group operations specified on the group's config_item_type. struct configfs_group_operations { - struct config_item *(*make_item)(struct config_group *group, - const char *name); - struct config_group *(*make_group)(struct config_group *group, - const char *name); + int (*make_item)(struct config_group *group, + const char *name, + struct config_item **new_item); + int (*make_group)(struct config_group *group, + const char *name, + struct config_group **new_group); int (*commit_item)(struct config_item *item); void (*disconnect_notify)(struct config_group *group, struct config_item *item); diff --git a/Documentation/filesystems/configfs/configfs_example.c b/Documentation/filesystems/configfs/configfs_example.c index 25151fd5c2c6..0b422acd470c 100644 --- a/Documentation/filesystems/configfs/configfs_example.c +++ b/Documentation/filesystems/configfs/configfs_example.c @@ -273,13 +273,13 @@ static inline struct simple_children *to_simple_children(struct config_item *ite return item ? container_of(to_config_group(item), struct simple_children, group) : NULL; } -static struct config_item *simple_children_make_item(struct config_group *group, const char *name) +static int simple_children_make_item(struct config_group *group, const char *name, struct config_item **new_item) { struct simple_child *simple_child; simple_child = kzalloc(sizeof(struct simple_child), GFP_KERNEL); if (!simple_child) - return NULL; + return -ENOMEM; config_item_init_type_name(&simple_child->item, name, @@ -287,7 +287,8 @@ static struct config_item *simple_children_make_item(struct config_group *group, simple_child->storeme = 0; - return &simple_child->item; + *new_item = &simple_child->item; + return 0; } static struct configfs_attribute simple_children_attr_description = { @@ -359,20 +360,21 @@ static struct configfs_subsystem simple_children_subsys = { * children of its own. */ -static struct config_group *group_children_make_group(struct config_group *group, const char *name) +static int group_children_make_group(struct config_group *group, const char *name, struct config_group **new_group) { struct simple_children *simple_children; simple_children = kzalloc(sizeof(struct simple_children), GFP_KERNEL); if (!simple_children) - return NULL; + return -ENOMEM; config_group_init_type_name(&simple_children->group, name, &simple_children_type); - return &simple_children->group; + *new_group = &simple_children->group; + return 0; } static struct configfs_attribute group_children_attr_description = { diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index 665341e43055..387a13395015 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -585,8 +585,9 @@ static struct config_item_type netconsole_target_type = { * Group operations and type for netconsole_subsys. */ -static struct config_item *make_netconsole_target(struct config_group *group, - const char *name) +static int make_netconsole_target(struct config_group *group, + const char *name, + struct config_item **new_item) { unsigned long flags; struct netconsole_target *nt; @@ -598,7 +599,7 @@ static struct config_item *make_netconsole_target(struct config_group *group, nt = kzalloc(sizeof(*nt), GFP_KERNEL); if (!nt) { printk(KERN_ERR "netconsole: failed to allocate memory\n"); - return NULL; + return -ENOMEM; } nt->np.name = "netconsole"; @@ -615,7 +616,8 @@ static struct config_item *make_netconsole_target(struct config_group *group, list_add(&nt->list, &target_list); spin_unlock_irqrestore(&target_list_lock, flags); - return &nt->item; + *new_item = &nt->item; + return 0; } static void drop_netconsole_target(struct config_group *group, diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index 614e382a6049..0e64312a084c 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -1073,25 +1073,24 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) group = NULL; item = NULL; if (type->ct_group_ops->make_group) { - group = type->ct_group_ops->make_group(to_config_group(parent_item), name); - if (group) { + ret = type->ct_group_ops->make_group(to_config_group(parent_item), name, &group); + if (!ret) { link_group(to_config_group(parent_item), group); item = &group->cg_item; } } else { - item = type->ct_group_ops->make_item(to_config_group(parent_item), name); - if (item) + ret = type->ct_group_ops->make_item(to_config_group(parent_item), name, &item); + if (!ret) link_obj(parent_item, item); } mutex_unlock(&subsys->su_mutex); kfree(name); - if (!item) { + if (ret) { /* - * If item == NULL, then link_obj() was never called. + * If ret != 0, then link_obj() was never called. * There are no extra references to clean up. */ - ret = -ENOMEM; goto out_put; } diff --git a/fs/dlm/config.c b/fs/dlm/config.c index eac23bd288b2..492d8caaaf25 100644 --- a/fs/dlm/config.c +++ b/fs/dlm/config.c @@ -41,16 +41,20 @@ struct comm; struct nodes; struct node; -static struct config_group *make_cluster(struct config_group *, const char *); +static int make_cluster(struct config_group *, const char *, + struct config_group **); static void drop_cluster(struct config_group *, struct config_item *); static void release_cluster(struct config_item *); -static struct config_group *make_space(struct config_group *, const char *); +static int make_space(struct config_group *, const char *, + struct config_group **); static void drop_space(struct config_group *, struct config_item *); static void release_space(struct config_item *); -static struct config_item *make_comm(struct config_group *, const char *); +static int make_comm(struct config_group *, const char *, + struct config_item **); static void drop_comm(struct config_group *, struct config_item *); static void release_comm(struct config_item *); -static struct config_item *make_node(struct config_group *, const char *); +static int make_node(struct config_group *, const char *, + struct config_item **); static void drop_node(struct config_group *, struct config_item *); static void release_node(struct config_item *); @@ -392,8 +396,8 @@ static struct node *to_node(struct config_item *i) return i ? container_of(i, struct node, item) : NULL; } -static struct config_group *make_cluster(struct config_group *g, - const char *name) +static int make_cluster(struct config_group *g, const char *name, + struct config_group **new_g) { struct cluster *cl = NULL; struct spaces *sps = NULL; @@ -431,14 +435,15 @@ static struct config_group *make_cluster(struct config_group *g, space_list = &sps->ss_group; comm_list = &cms->cs_group; - return &cl->group; + *new_g = &cl->group; + return 0; fail: kfree(cl); kfree(gps); kfree(sps); kfree(cms); - return NULL; + return -ENOMEM; } static void drop_cluster(struct config_group *g, struct config_item *i) @@ -466,7 +471,8 @@ static void release_cluster(struct config_item *i) kfree(cl); } -static struct config_group *make_space(struct config_group *g, const char *name) +static int make_space(struct config_group *g, const char *name, + struct config_group **new_g) { struct space *sp = NULL; struct nodes *nds = NULL; @@ -489,13 +495,14 @@ static struct config_group *make_space(struct config_group *g, const char *name) INIT_LIST_HEAD(&sp->members); mutex_init(&sp->members_lock); sp->members_count = 0; - return &sp->group; + *new_g = &sp->group; + return 0; fail: kfree(sp); kfree(gps); kfree(nds); - return NULL; + return -ENOMEM; } static void drop_space(struct config_group *g, struct config_item *i) @@ -522,19 +529,21 @@ static void release_space(struct config_item *i) kfree(sp); } -static struct config_item *make_comm(struct config_group *g, const char *name) +static int make_comm(struct config_group *g, const char *name, + struct config_item **new_i) { struct comm *cm; cm = kzalloc(sizeof(struct comm), GFP_KERNEL); if (!cm) - return NULL; + return -ENOMEM; config_item_init_type_name(&cm->item, name, &comm_type); cm->nodeid = -1; cm->local = 0; cm->addr_count = 0; - return &cm->item; + *new_i = &cm->item; + return 0; } static void drop_comm(struct config_group *g, struct config_item *i) @@ -554,14 +563,15 @@ static void release_comm(struct config_item *i) kfree(cm); } -static struct config_item *make_node(struct config_group *g, const char *name) +static int make_node(struct config_group *g, const char *name, + struct config_item **new_i) { struct space *sp = to_space(g->cg_item.ci_parent); struct node *nd; nd = kzalloc(sizeof(struct node), GFP_KERNEL); if (!nd) - return NULL; + return -ENOMEM; config_item_init_type_name(&nd->item, name, &node_type); nd->nodeid = -1; @@ -573,7 +583,8 @@ static struct config_item *make_node(struct config_group *g, const char *name) sp->members_count++; mutex_unlock(&sp->members_lock); - return &nd->item; + *new_i = &nd->item; + return 0; } static void drop_node(struct config_group *g, struct config_item *i) diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c index f02ccb34604d..443d108211ab 100644 --- a/fs/ocfs2/cluster/heartbeat.c +++ b/fs/ocfs2/cluster/heartbeat.c @@ -1489,25 +1489,28 @@ static struct o2hb_heartbeat_group *to_o2hb_heartbeat_group(struct config_group : NULL; } -static struct config_item *o2hb_heartbeat_group_make_item(struct config_group *group, - const char *name) +static int o2hb_heartbeat_group_make_item(struct config_group *group, + const char *name, + struct config_item **new_item) { struct o2hb_region *reg = NULL; - struct config_item *ret = NULL; + int ret = 0; reg = kzalloc(sizeof(struct o2hb_region), GFP_KERNEL); - if (reg == NULL) - goto out; /* ENOMEM */ + if (reg == NULL) { + ret = -ENOMEM; + goto out; + } config_item_init_type_name(®->hr_item, name, &o2hb_region_type); - ret = ®->hr_item; + *new_item = ®->hr_item; spin_lock(&o2hb_live_lock); list_add_tail(®->hr_all_item, &o2hb_all_regions); spin_unlock(&o2hb_live_lock); out: - if (ret == NULL) + if (ret) kfree(reg); return ret; diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c index cfdb08b484ed..b364b7052e46 100644 --- a/fs/ocfs2/cluster/nodemanager.c +++ b/fs/ocfs2/cluster/nodemanager.c @@ -644,27 +644,32 @@ out: return ret; } -static struct config_item *o2nm_node_group_make_item(struct config_group *group, - const char *name) +static int o2nm_node_group_make_item(struct config_group *group, + const char *name, + struct config_item **new_item) { struct o2nm_node *node = NULL; - struct config_item *ret = NULL; + int ret = 0; - if (strlen(name) > O2NM_MAX_NAME_LEN) - goto out; /* ENAMETOOLONG */ + if (strlen(name) > O2NM_MAX_NAME_LEN) { + ret = -ENAMETOOLONG; + goto out; + } node = kzalloc(sizeof(struct o2nm_node), GFP_KERNEL); - if (node == NULL) - goto out; /* ENOMEM */ + if (node == NULL) { + ret = -ENOMEM; + goto out; + } strcpy(node->nd_name, name); /* use item.ci_namebuf instead? */ config_item_init_type_name(&node->nd_item, name, &o2nm_node_type); spin_lock_init(&node->nd_lock); - ret = &node->nd_item; + *new_item = &node->nd_item; out: - if (ret == NULL) + if (ret) kfree(node); return ret; @@ -751,25 +756,31 @@ static struct o2nm_cluster_group *to_o2nm_cluster_group(struct config_group *gro } #endif -static struct config_group *o2nm_cluster_group_make_group(struct config_group *group, - const char *name) +static int o2nm_cluster_group_make_group(struct config_group *group, + const char *name, + struct config_group **new_group) { struct o2nm_cluster *cluster = NULL; struct o2nm_node_group *ns = NULL; - struct config_group *o2hb_group = NULL, *ret = NULL; + struct config_group *o2hb_group = NULL; void *defs = NULL; + int ret = 0; /* this runs under the parent dir's i_mutex; there can be only * one caller in here at a time */ - if (o2nm_single_cluster) - goto out; /* ENOSPC */ + if (o2nm_single_cluster) { + ret = -ENOSPC; + goto out; + } cluster = kzalloc(sizeof(struct o2nm_cluster), GFP_KERNEL); ns = kzalloc(sizeof(struct o2nm_node_group), GFP_KERNEL); defs = kcalloc(3, sizeof(struct config_group *), GFP_KERNEL); o2hb_group = o2hb_alloc_hb_set(); - if (cluster == NULL || ns == NULL || o2hb_group == NULL || defs == NULL) + if (cluster == NULL || ns == NULL || o2hb_group == NULL || defs == NULL) { + ret = -ENOMEM; goto out; + } config_group_init_type_name(&cluster->cl_group, name, &o2nm_cluster_type); @@ -786,11 +797,11 @@ static struct config_group *o2nm_cluster_group_make_group(struct config_group *g cluster->cl_idle_timeout_ms = O2NET_IDLE_TIMEOUT_MS_DEFAULT; cluster->cl_keepalive_delay_ms = O2NET_KEEPALIVE_DELAY_MS_DEFAULT; - ret = &cluster->cl_group; + *new_group = &cluster->cl_group; o2nm_single_cluster = cluster; out: - if (ret == NULL) { + if (ret) { kfree(cluster); kfree(ns); o2hb_free_hb_set(o2hb_group); diff --git a/include/linux/configfs.h b/include/linux/configfs.h index 3ae65b1bf90f..0488f937634a 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -165,8 +165,8 @@ struct configfs_item_operations { }; struct configfs_group_operations { - struct config_item *(*make_item)(struct config_group *group, const char *name); - struct config_group *(*make_group)(struct config_group *group, const char *name); + int (*make_item)(struct config_group *group, const char *name, struct config_item **new_item); + int (*make_group)(struct config_group *group, const char *name, struct config_group **new_group); int (*commit_item)(struct config_item *item); void (*disconnect_notify)(struct config_group *group, struct config_item *item); void (*drop_item)(struct config_group *group, struct config_item *item); -- cgit v1.2.3 From e75206517504461778c283b942440ef312e437d5 Mon Sep 17 00:00:00 2001 From: Louis Rilling Date: Thu, 12 Jun 2008 17:26:47 +0200 Subject: configfs: call drop_link() to cleanup after create_link() failure When allow_link() succeeds but create_link() fails, the subsystem is not informed of the failure. This patch fixes this by calling drop_link() on create_link() failures. Signed-off-by: Louis Rilling Signed-off-by: Joel Becker --- fs/configfs/symlink.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c index faeb4417a10d..0004d18c40ac 100644 --- a/fs/configfs/symlink.c +++ b/fs/configfs/symlink.c @@ -140,8 +140,12 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna goto out_put; ret = type->ct_item_ops->allow_link(parent_item, target_item); - if (!ret) + if (!ret) { ret = create_link(parent_item, target_item, dentry); + if (ret && type->ct_item_ops->drop_link) + type->ct_item_ops->drop_link(parent_item, + target_item); + } config_item_put(target_item); path_put(&nd.path); -- cgit v1.2.3 From a41eebab7537890409ea9dfe0fcda9b5fbdb090d Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 14 Jul 2008 16:41:12 -0400 Subject: ftrace: document updates The following updates were recommended by Elias Oltmanns and Randy Dunlap. [ updates based on Andrew Morton's comments are still to come. ] Signed-off-by: Steven Rostedt Signed-off-by: Linus Torvalds --- Documentation/ftrace.txt | 134 +++++++++++++++++++++++++---------------------- 1 file changed, 71 insertions(+), 63 deletions(-) diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index 13e4bf054c38..77d3faa1a611 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -2,8 +2,11 @@ ======================== Copyright 2008 Red Hat Inc. -Author: Steven Rostedt + Author: Steven Rostedt + License: The GNU Free Documentation License, Version 1.2 +Reviewers: Elias Oltmanns and Randy Dunlap +Writen for: 2.6.26-rc8 linux-2.6-tip.git tip/tracing/ftrace branch Introduction ------------ @@ -46,7 +49,7 @@ of ftrace. Here is a list of some of the key files: that is configured. available_tracers : This holds the different types of tracers that - has been compiled into the kernel. The tracers + have been compiled into the kernel. The tracers listed here can be configured by echoing in their name into current_tracer. @@ -90,11 +93,13 @@ of ftrace. Here is a list of some of the key files: trace_entries : This sets or displays the number of trace entries each CPU buffer can hold. The tracer buffers are the same size for each CPU, so care must be - taken when modifying the trace_entries. The number - of actually entries will be the number given - times the number of possible CPUS. The buffers - are saved as individual pages, and the actual entries - will always be rounded up to entries per page. + taken when modifying the trace_entries. The trace + buffers are allocated in pages (blocks of memory that + the kernel uses for allocation, usually 4 KB in size). + Since each entry is smaller than a page, if the last + allocated page has room for more entries than were + requested, the rest of the page is used to allocate + entries. This can only be updated when the current_tracer is set to "none". @@ -114,13 +119,13 @@ of ftrace. Here is a list of some of the key files: in performance. This also has a side effect of enabling or disabling specific functions to be traced. Echoing in names of functions into this - file will limit the trace to only those files. + file will limit the trace to only these functions. set_ftrace_notrace: This has the opposite effect that set_ftrace_filter has. Any function that is added here will not be traced. If a function exists - in both set_ftrace_filter and set_ftrace_notrace - the function will _not_ bet traced. + in both set_ftrace_filter and set_ftrace_notrace, + the function will _not_ be traced. available_filter_functions : When a function is encountered the first time by the dynamic tracer, it is recorded and @@ -138,7 +143,7 @@ Here are the list of current tracers that can be configured. ftrace - function tracer that uses mcount to trace all functions. It is possible to filter out which functions that are - traced when dynamic ftrace is configured in. + to be traced when dynamic ftrace is configured in. sched_switch - traces the context switches between tasks. @@ -297,13 +302,13 @@ explains which is which. The above is mostly meaningful for kernel developers. - time: This differs from the trace output where as the trace output - contained a absolute timestamp. This timestamp is relative - to the start of the first entry in the the trace. + time: This differs from the trace file output. The trace file output + included an absolute timestamp. The timestamp used by the + latency_trace file is relative to the start of the trace. delay: This is just to help catch your eye a bit better. And needs to be fixed to be only relative to the same CPU. - The marks is determined by the difference between this + The marks are determined by the difference between this current trace and the next trace. '!' - greater than preempt_mark_thresh (default 100) '+' - greater than 1 microsecond @@ -322,13 +327,13 @@ output. To see what is available, simply cat the file: print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \ noblock nostacktrace nosched-tree -To disable one of the options, echo in the option appended with "no". +To disable one of the options, echo in the option prepended with "no". echo noprint-parent > /debug/tracing/iter_ctrl To enable an option, leave off the "no". - echo sym-offest > /debug/tracing/iter_ctrl + echo sym-offset > /debug/tracing/iter_ctrl Here are the available options: @@ -344,7 +349,7 @@ Here are the available options: sym-offset - Display not only the function name, but also the offset in the function. For example, instead of seeing just - "ktime_get" you will see "ktime_get+0xb/0x20" + "ktime_get", you will see "ktime_get+0xb/0x20". sym-offset: bash-4000 [01] 1477.606694: simple_strtoul+0x6/0xa0 @@ -364,7 +369,7 @@ Here are the available options: user applications that can translate the raw numbers better than having it done in the kernel. - hex - similar to raw, but the numbers will be in a hexadecimal format. + hex - Similar to raw, but the numbers will be in a hexadecimal format. bin - This will print out the formats in raw binary. @@ -381,7 +386,7 @@ sched_switch ------------ This tracer simply records schedule switches. Here's an example -on how to implement it. +of how to use it. # echo sched_switch > /debug/tracing/current_tracer # echo 1 > /debug/tracing/tracing_enabled @@ -470,7 +475,7 @@ interrupt from triggering or the mouse interrupt from letting the kernel know of a new mouse event. The result is a latency with the reaction time. -The irqsoff tracer tracks the time interrupts are disabled and when +The irqsoff tracer tracks the time interrupts are disabled to the time they are re-enabled. When a new maximum latency is hit, it saves off the trace so that it may be retrieved at a later time. Every time a new maximum in reached, the old saved trace is discarded and the new @@ -519,7 +524,7 @@ The difference between the 6 and the displayed timestamp 7us is because the clock must have incremented between the time of recording the max latency and recording the function that had that latency. -Note the above had ftrace_enabled not set. If we set the ftrace_enabled +Note the above had ftrace_enabled not set. If we set the ftrace_enabled, we get a much larger output: # tracer: irqsoff @@ -570,21 +575,21 @@ vim:ft=help Here we traced a 50 microsecond latency. But we also see all the -functions that were called during that time. Note that enabling -function tracing we endure an added overhead. This overhead may -extend the latency times. But never the less, this trace has provided -some very helpful debugging. +functions that were called during that time. Note that by enabling +function tracing, we endure an added overhead. This overhead may +extend the latency times. But nevertheless, this trace has provided +some very helpful debugging information. preemptoff ---------- -When preemption is disabled we may be able to receive interrupts but -the task can not be preempted and a higher priority task must wait +When preemption is disabled, we may be able to receive interrupts but +the task cannot be preempted and a higher priority task must wait for preemption to be enabled again before it can preempt a lower priority task. -The preemptoff tracer traces the places that disables preemption. +The preemptoff tracer traces the places that disable preemption. Like the irqsoff, it records the maximum latency that preemption was disabled. The control of preemptoff is much like the irqsoff. @@ -696,7 +701,7 @@ Notice that the __do_softirq when called doesn't have a preempt_count. It may seem that we missed a preempt enabled. What really happened is that the preempt count is held on the threads stack and we switched to the softirq stack (4K stacks in effect). The code -does not copy the preempt count, but because interrupts are disabled +does not copy the preempt count, but because interrupts are disabled, we don't need to worry about it. Having a tracer like this is good to let people know what really happens inside the kernel. @@ -732,7 +737,7 @@ To record this time, use the preemptirqsoff tracer. Again, using this trace is much like the irqsoff and preemptoff tracers. - # echo preemptoff > /debug/tracing/current_tracer + # echo preemptirqsoff > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency # echo 1 > /debug/tracing/tracing_enabled # ls -ltr @@ -862,9 +867,9 @@ This is a very interesting trace. It started with the preemption of the ls task. We see that the task had the "need_resched" bit set with the 'N' in the trace. Interrupts are disabled in the spin_lock and the trace started. We see that a schedule took place to run -sshd. When the interrupts were enabled we took an interrupt. -On return of the interrupt the softirq ran. We took another interrupt -while running the softirq as we see with the capital 'H'. +sshd. When the interrupts were enabled, we took an interrupt. +On return from the interrupt handler, the softirq ran. We took another +interrupt while running the softirq as we see with the capital 'H'. wakeup @@ -876,9 +881,9 @@ time it executes. This is also known as "schedule latency". I stress the point that this is about RT tasks. It is also important to know the scheduling latency of non-RT tasks, but the average schedule latency is better for non-RT tasks. Tools like -LatencyTop is more appropriate for such measurements. +LatencyTop are more appropriate for such measurements. -Real-Time environments is interested in the worst case latency. +Real-Time environments are interested in the worst case latency. That is the longest latency it takes for something to happen, and not the average. We can have a very fast scheduler that may only have a large latency once in a while, but that would not work well @@ -889,8 +894,8 @@ tasks that are unpredictable will overwrite the worst case latency of RT tasks. Since this tracer only deals with RT tasks, we will run this slightly -different than we did with the previous tracers. Instead of performing -an 'ls' we will run 'sleep 1' under 'chrt' which changes the +differently than we did with the previous tracers. Instead of performing +an 'ls', we will run 'sleep 1' under 'chrt' which changes the priority of the task. # echo wakeup > /debug/tracing/current_tracer @@ -924,9 +929,9 @@ wakeup latency trace v1.1.5 on 2.6.26-rc8 vim:ft=help -Running this on an idle system we see that it only took 4 microseconds +Running this on an idle system, we see that it only took 4 microseconds to perform the task switch. Note, since the trace marker in the -schedule is before the actual "switch" we stop the tracing when +schedule is before the actual "switch", we stop the tracing when the recorded task is about to schedule in. This may change if we add a new marker at the end of the scheduler. @@ -992,12 +997,15 @@ ksoftirq-7 1d..4 50us : schedule (__cond_resched) The interrupt went off while running ksoftirqd. This task runs at SCHED_OTHER. Why didn't we see the 'N' set early? This may be -a harmless bug with x86_32 and 4K stacks. The need_reched() function -that tests if we need to reschedule looks on the actual stack. -Where as the setting of the NEED_RESCHED bit happens on the -task's stack. But because we are in a hard interrupt, the test -is with the interrupts stack which has that to be false. We don't -see the 'N' until we switch back to the task's stack. +a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K stacks +configured, the interrupt and softirq runs with their own stack. +Some information is held on the top of the task's stack (need_resched +and preempt_count are both stored there). The setting of the NEED_RESCHED +bit is done directly to the task's stack, but the reading of the +NEED_RESCHED is done by looking at the current stack, which in this case +is the stack for the hard interrupt. This hides the fact that NEED_RESCHED +has been set. We don't see the 'N' until we switch back to the task's +assigned stack. ftrace ------ @@ -1067,10 +1075,10 @@ this works is the mcount function call (placed at the start of every kernel function, produced by the -pg switch in gcc), starts of pointing to a simple return. -When dynamic ftrace is initialized, it calls kstop_machine to make it -act like a uniprocessor so that it can freely modify code without -worrying about other processors executing that same code. At -initialization, the mcount calls are change to call a "record_ip" +When dynamic ftrace is initialized, it calls kstop_machine to make +the machine act like a uniprocessor so that it can freely modify code +without worrying about other processors executing that same code. At +initialization, the mcount calls are changed to call a "record_ip" function. After this, the first time a kernel function is called, it has the calling address saved in a hash table. @@ -1085,8 +1093,8 @@ traced, is that we can now selectively choose which functions we want to trace and which ones we want the mcount calls to remain as nops. -Two files that contain to the enabling and disabling of recorded -functions are: +Two files are used, one for enabling and one for disabling the tracing +of recorded functions. They are: set_ftrace_filter @@ -1094,7 +1102,7 @@ and set_ftrace_notrace -A list of available functions that you can add to this files is listed +A list of available functions that you can add to these files is listed in: available_filter_functions @@ -1133,9 +1141,9 @@ sys_nanosleep Perhaps this isn't enough. The filters also allow simple wild cards. -Only the following is currently available +Only the following are currently available - * - will match functions that begins with + * - will match functions that begin with * - will match functions that end with ** - will match functions that have in it @@ -1187,7 +1195,7 @@ This is because the '>' and '>>' act just like they do in bash. To rewrite the filters, use '>' To append to the filters, use '>>' -To clear out a filter so that all functions will be recorded again. +To clear out a filter so that all functions will be recorded again: # echo > /debug/tracing/set_ftrace_filter # cat /debug/tracing/set_ftrace_filter @@ -1246,8 +1254,8 @@ ftraced As mentioned above, when dynamic ftrace is configured in, a kernel thread wakes up once a second and checks to see if there are mcount -calls that need to be converted into nops. If there is not, then -it simply goes back to sleep. But if there is, it will call +calls that need to be converted into nops. If there are not any, then +it simply goes back to sleep. But if there are some, it will call kstop_machine to convert the calls to nops. There may be a case that you do not want this added latency. @@ -1262,8 +1270,8 @@ mcount calls to nops. Remember that there's a large overhead to calling mcount. Without this kernel thread, that overhead will exist. -Any write to the ftraced_enabled file will cause the kstop_machine -to run if there are recorded calls to mcount. This means that a +If there are recorded calls to mcount, any write to the ftraced_enabled +file will cause the kstop_machine to run. This means that a user can manually perform the updates when they want to by simply echoing a '0' into the ftraced_enabled file. @@ -1315,7 +1323,7 @@ trace entries Having too much or not enough data can be troublesome in diagnosing some issue in the kernel. The file trace_entries is used to modify -the size of the internal trace buffers. The numbers listed +the size of the internal trace buffers. The number listed is the number of entries that can be recorded per CPU. To know the full size, multiply the number of possible CPUS with the number of entries. @@ -1323,7 +1331,7 @@ number of entries. # cat /debug/tracing/trace_entries 65620 -Note, to modify this you must have tracing fulling disabled. To do that, +Note, to modify this, you must have tracing completely disabled. To do that, echo "none" into the current_tracer. # echo none > /debug/tracing/current_tracer @@ -1344,7 +1352,7 @@ it will add them. This shows us that 85 entries can fit on a single page. The number of pages that will be allocated is a percentage of available -memory. Allocating too much will produces an error. +memory. Allocating too much will produce an error. # echo 1000000000000 > /debug/tracing/trace_entries -bash: echo: write error: Cannot allocate memory -- cgit v1.2.3 From beef3129b3afb74817acff72fda4a9d951e3973e Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Fri, 11 Jul 2008 15:21:17 -0600 Subject: x86/PCI: Fix PCI config space for domains > 0 John Keller reports that PCI config space access is broken on machines with more than one domain. conf1 accesses only work for domain 0, so make sure we check the domain number in the raw routines before trying conf1. Reported-by: John Keller Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes --- arch/x86/pci/common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index d19fd07bafd6..86aff81a0829 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -32,7 +32,7 @@ struct pci_raw_ops *raw_pci_ext_ops; int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn, int reg, int len, u32 *val) { - if (reg < 256 && raw_pci_ops) + if (domain == 0 && reg < 256 && raw_pci_ops) return raw_pci_ops->read(domain, bus, devfn, reg, len, val); if (raw_pci_ext_ops) return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val); @@ -42,7 +42,7 @@ int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn, int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn, int reg, int len, u32 val) { - if (reg < 256 && raw_pci_ops) + if (domain == 0 && reg < 256 && raw_pci_ops) return raw_pci_ops->write(domain, bus, devfn, reg, len, val); if (raw_pci_ext_ops) return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val); -- cgit v1.2.3 From c157dfa3e4aea5775389f2f4d53c040bc8813af1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 13 Jul 2008 22:45:06 +0200 Subject: PCI PM: Fix pci_prepare_to_sleep The recently introduced pci_prepare_to_sleep() needs the following fix, because there are systems which are not power manageable by ACPI (ie. ACPI doesn't provide methods to put the device into low power states and back), but require ACPI hooks to be executed for wake-up to work. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e632a58ba5d0..ace518116cc5 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1152,7 +1152,6 @@ int pci_prepare_to_sleep(struct pci_dev *dev) break; default: target_state = state; - pci_enable_wake(dev, target_state, true); } } else if (device_may_wakeup(&dev->dev)) { /* @@ -1167,10 +1166,11 @@ int pci_prepare_to_sleep(struct pci_dev *dev) while (target_state && !(dev->pme_support & (1 << target_state))) target_state--; - pci_pme_active(dev, true); } } + pci_enable_wake(dev, target_state, true); + error = pci_set_power_state(dev, target_state); if (error) -- cgit v1.2.3 From c300bd2fb583afb6d68804afd38bc90b31310d95 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 10 Jul 2008 02:16:44 +0200 Subject: PCI: include linux/pm_wakeup.h for device_set_wakeup_capable drivers/pci/pci.c needs pm_wakeup.h since it uses device_set_wakup_capable(). The latter also needs to be stubbed out for !CONFIG_PM. Signed-off-by: Stephen Rothwell Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 1 + include/linux/pm_wakeup.h | 2 ++ 2 files changed, 3 insertions(+) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index ace518116cc5..44a46c92b721 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -17,6 +17,7 @@ #include #include #include +#include #include /* isa_dma_bridge_buggy */ #include "pci.h" diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h index 3af0c8d05cdc..0aae7776185e 100644 --- a/include/linux/pm_wakeup.h +++ b/include/linux/pm_wakeup.h @@ -63,6 +63,8 @@ static inline void device_init_wakeup(struct device *dev, int val) dev->power.can_wakeup = !!val; } +static inline void device_set_wakeup_capable(struct device *dev, int val) { } + static inline int device_can_wakeup(struct device *dev) { return dev->power.can_wakeup; -- cgit v1.2.3 From 04a33e406a062cd1bb55014ee17a3558109a2d74 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 23 Jun 2008 11:36:23 +0100 Subject: cpia2: use request_firmware() Thanks for Jaswinder Singh for converting the firmware blob itself to ihex. Signed-off-by: David Woodhouse --- drivers/media/video/cpia2/cpia2_core.c | 46 +++++-- drivers/media/video/cpia2/cpia2patch.h | 233 --------------------------------- firmware/Makefile | 1 + firmware/WHENCE | 13 ++ firmware/cpia2/stv0672_vp4.bin.ihex | 73 +++++++++++ 5 files changed, 124 insertions(+), 242 deletions(-) delete mode 100644 drivers/media/video/cpia2/cpia2patch.h create mode 100644 firmware/cpia2/stv0672_vp4.bin.ihex diff --git a/drivers/media/video/cpia2/cpia2_core.c b/drivers/media/video/cpia2/cpia2_core.c index c8b9fdb700ff..f2e8b1c82c66 100644 --- a/drivers/media/video/cpia2/cpia2_core.c +++ b/drivers/media/video/cpia2/cpia2_core.c @@ -33,11 +33,10 @@ #include #include +#include /* #define _CPIA2_DEBUG_ */ -#include "cpia2patch.h" - #ifdef _CPIA2_DEBUG_ static const char *block_name[] = { @@ -893,24 +892,53 @@ int cpia2_set_low_power(struct camera_data *cam) * apply_vp_patch * *****************************************************************************/ +static int cpia2_send_onebyte_command(struct camera_data *cam, + struct cpia2_command *cmd, + u8 start, u8 datum) +{ + cmd->buffer.block_data[0] = datum; + cmd->start = start; + cmd->reg_count = 1; + return cpia2_send_command(cam, cmd); +} + static int apply_vp_patch(struct camera_data *cam) { - int i, j; + const struct firmware *fw; + const char fw_name[] = "cpia2/stv0672_vp4.bin"; + int i, ret; struct cpia2_command cmd; + ret = request_firmware(&fw, fw_name, &cam->dev->dev); + if (ret) { + printk(KERN_ERR "cpia2: failed to load VP patch \"%s\"\n", + fw_name); + return ret; + } + cmd.req_mode = CAMERAACCESS_TYPE_REPEAT | CAMERAACCESS_VP; cmd.direction = TRANSFER_WRITE; - for (i = 0; i < PATCH_DATA_SIZE; i++) { - for (j = 0; j < patch_data[i].count; j++) { - cmd.buffer.block_data[j] = patch_data[i].data[j]; - } + /* First send the start address... */ + cpia2_send_onebyte_command(cam, &cmd, 0x0A, fw->data[0]); /* hi */ + cpia2_send_onebyte_command(cam, &cmd, 0x0B, fw->data[1]); /* lo */ - cmd.start = patch_data[i].reg; - cmd.reg_count = patch_data[i].count; + /* ... followed by the data payload */ + for (i = 2; i < fw->size; i += 64) { + cmd.start = 0x0C; /* Data */ + cmd.reg_count = min_t(int, 64, fw->size - i); + memcpy(cmd.buffer.block_data, &fw->data[i], cmd.reg_count); cpia2_send_command(cam, &cmd); } + /* Next send the start address... */ + cpia2_send_onebyte_command(cam, &cmd, 0x0A, fw->data[0]); /* hi */ + cpia2_send_onebyte_command(cam, &cmd, 0x0B, fw->data[1]); /* lo */ + + /* ... followed by the 'goto' command */ + cpia2_send_onebyte_command(cam, &cmd, 0x0D, 1); + + release_firmware(fw); return 0; } diff --git a/drivers/media/video/cpia2/cpia2patch.h b/drivers/media/video/cpia2/cpia2patch.h deleted file mode 100644 index 7f085fbe76fb..000000000000 --- a/drivers/media/video/cpia2/cpia2patch.h +++ /dev/null @@ -1,233 +0,0 @@ -/**************************************************************************** - * - * Filename: cpia2patch.h - * - * Copyright 2001, STMicrolectronics, Inc. - * - * Contact: steve.miller@st.com - * - * Description: - * This file contains patch data for the CPiA2 (stv0672) VP4. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - ****************************************************************************/ - -#ifndef CPIA2_PATCH_HEADER -#define CPIA2_PATCH_HEADER - -typedef struct { - unsigned char reg; - unsigned char count; - const unsigned char *data; -} cpia2_patch; - -static const unsigned char start_address_hi[1] = { - 0x01 -}; - -static const unsigned char start_address_lo[1] = { - 0xBC -}; - -static const unsigned char patch_block0[64] = { - 0xE3, 0x02, 0xE3, 0x03, 0xE3, 0x04, 0xE3, 0x05, - 0xE3, 0x06, 0xE3, 0x07, 0x93, 0x44, 0x56, 0xD4, - 0x93, 0x4E, 0x56, 0x51, 0x93, 0x4E, 0x51, 0xD6, - 0x93, 0x4E, 0x4F, 0x54, 0x93, 0x4E, 0x92, 0x4F, - 0x92, 0xA4, 0x93, 0x05, 0x92, 0xF4, 0x93, 0x1B, - 0x92, 0x92, 0x91, 0xE6, 0x92, 0x36, 0x92, 0x74, - 0x92, 0x4A, 0x92, 0x8C, 0x92, 0x8E, 0xC8, 0xD0, - 0x0B, 0x42, 0x02, 0xA0, 0xCA, 0x92, 0x09, 0x02 -}; - -static const unsigned char patch_block1[64] = { - 0xC9, 0x10, 0x0A, 0x0A, 0x0A, 0x81, 0xE3, 0xB8, - 0xE3, 0xB0, 0xE3, 0xA8, 0xE3, 0xA0, 0xE3, 0x98, - 0xE3, 0x90, 0xE1, 0x00, 0xCF, 0xD7, 0x0A, 0x12, - 0xCC, 0x95, 0x08, 0xB2, 0x0A, 0x18, 0xE1, 0x00, - 0x01, 0xEE, 0x0C, 0x08, 0x4A, 0x12, 0xC8, 0x18, - 0xF0, 0x9A, 0xC0, 0x22, 0xF3, 0x1C, 0x4A, 0x13, - 0xF3, 0x14, 0xC8, 0xA0, 0xF2, 0x14, 0xF2, 0x1C, - 0xEB, 0x13, 0xD3, 0xA2, 0x63, 0x16, 0x48, 0x9E -}; - -static const unsigned char patch_block2[64] = { - 0xF0, 0x18, 0xA4, 0x03, 0xF3, 0x93, 0xC0, 0x58, - 0xF7, 0x13, 0x51, 0x9C, 0xE9, 0x20, 0xCF, 0xEF, - 0x63, 0xF9, 0x92, 0x2E, 0xD3, 0x5F, 0x63, 0xFA, - 0x92, 0x2E, 0xD3, 0x67, 0x63, 0xFB, 0x92, 0x2E, - 0xD3, 0x6F, 0xE9, 0x1A, 0x63, 0x16, 0x48, 0xA7, - 0xF0, 0x20, 0xA4, 0x06, 0xF3, 0x94, 0xC0, 0x27, - 0xF7, 0x14, 0xF5, 0x13, 0x51, 0x9D, 0xF6, 0x13, - 0x63, 0x18, 0xC4, 0x20, 0xCB, 0xEF, 0x63, 0xFC -}; - -static const unsigned char patch_block3[64] = { - 0x92, 0x2E, 0xD3, 0x77, 0x63, 0xFD, 0x92, 0x2E, - 0xD3, 0x7F, 0x63, 0xFE, 0x92, 0x2E, 0xD3, 0x87, - 0x63, 0xFF, 0x92, 0x2E, 0xD3, 0x8F, 0x64, 0x38, - 0x92, 0x2E, 0xD3, 0x97, 0x64, 0x39, 0x92, 0x2E, - 0xD3, 0x9F, 0xE1, 0x00, 0xF5, 0x3A, 0xF4, 0x3B, - 0xF7, 0xBF, 0xF2, 0xBC, 0xF2, 0x3D, 0xE1, 0x00, - 0x80, 0x87, 0x90, 0x80, 0x51, 0xD5, 0x02, 0x22, - 0x02, 0x32, 0x4B, 0xD3, 0xF7, 0x11, 0x0B, 0xDA -}; - -static const unsigned char patch_block4[64] = { - 0xE1, 0x00, 0x0E, 0x02, 0x02, 0x40, 0x0D, 0xB5, - 0xE3, 0x02, 0x48, 0x55, 0xE5, 0x12, 0xA4, 0x01, - 0xE8, 0x1B, 0xE3, 0x90, 0xF0, 0x18, 0xA4, 0x01, - 0xE8, 0xBF, 0x8D, 0xB8, 0x4B, 0xD1, 0x4B, 0xD8, - 0x0B, 0xCB, 0x0B, 0xC2, 0xE1, 0x00, 0xE3, 0x02, - 0xE3, 0x03, 0x52, 0xD3, 0x60, 0x59, 0xE6, 0x93, - 0x0D, 0x22, 0x52, 0xD4, 0xE6, 0x93, 0x0D, 0x2A, - 0xE3, 0x98, 0xE3, 0x90, 0xE1, 0x00, 0x02, 0x5D -}; - -static const unsigned char patch_block5[64] = { - 0x02, 0x63, 0xE3, 0x02, 0xC8, 0x12, 0x02, 0xCA, - 0xC8, 0x52, 0x02, 0xC2, 0x82, 0x68, 0xE3, 0x02, - 0xC8, 0x14, 0x02, 0xCA, 0xC8, 0x90, 0x02, 0xC2, - 0x0A, 0xD0, 0xC9, 0x93, 0x0A, 0xDA, 0xCC, 0xD2, - 0x0A, 0xE2, 0x63, 0x12, 0x02, 0xDA, 0x0A, 0x98, - 0x0A, 0xA0, 0x0A, 0xA8, 0xE3, 0x90, 0xE1, 0x00, - 0xE3, 0x02, 0x0A, 0xD0, 0xC9, 0x93, 0x0A, 0xDA, - 0xCC, 0xD2, 0x0A, 0xE2, 0x63, 0x12, 0x02, 0xDA -}; - -static const unsigned char patch_block6[64] = { - 0x0A, 0x98, 0x0A, 0xA0, 0x0A, 0xA8, 0x49, 0x91, - 0xE5, 0x6A, 0xA4, 0x04, 0xC8, 0x12, 0x02, 0xCA, - 0xC8, 0x52, 0x82, 0x89, 0xC8, 0x14, 0x02, 0xCA, - 0xC8, 0x90, 0x02, 0xC2, 0xE3, 0x90, 0xE1, 0x00, - 0x08, 0x60, 0xE1, 0x00, 0x48, 0x53, 0xE8, 0x97, - 0x08, 0x5A, 0xE1, 0x00, 0xE3, 0x02, 0xE3, 0x03, - 0x54, 0xD3, 0x60, 0x59, 0xE6, 0x93, 0x0D, 0x52, - 0xE3, 0x98, 0xE3, 0x90, 0xE1, 0x00, 0x02, 0x9C -}; - -static const unsigned char patch_block7[64] = { - 0xE3, 0x02, 0x55, 0x13, 0x93, 0x17, 0x55, 0x13, - 0x93, 0x17, 0xE3, 0x90, 0xE1, 0x00, 0x75, 0x30, - 0xE3, 0x02, 0xE3, 0x03, 0x55, 0x55, 0x60, 0x59, - 0xE6, 0x93, 0x0D, 0xB2, 0xE3, 0x98, 0xE3, 0x90, - 0xE1, 0x00, 0x02, 0xAE, 0xE7, 0x92, 0xE9, 0x18, - 0xEA, 0x9A, 0xE8, 0x98, 0xE8, 0x10, 0xE8, 0x11, - 0xE8, 0x51, 0xD2, 0xDA, 0xD2, 0xF3, 0xE8, 0x13, - 0xD2, 0xFA, 0xE8, 0x50, 0xD2, 0xEA, 0xE8, 0xD0 -}; - -static const unsigned char patch_block8[64] = { - 0xE8, 0xD1, 0xD3, 0x0A, 0x03, 0x09, 0x48, 0x23, - 0xE5, 0x2C, 0xA0, 0x03, 0x48, 0x24, 0xEA, 0x1C, - 0x03, 0x08, 0xD2, 0xE3, 0xD3, 0x03, 0xD3, 0x13, - 0xE1, 0x00, 0x02, 0xCB, 0x05, 0x93, 0x57, 0x93, - 0xF0, 0x9A, 0xAC, 0x0B, 0xE3, 0x07, 0x92, 0xEA, - 0xE2, 0x9F, 0xE5, 0x06, 0xE3, 0xB0, 0xA0, 0x02, - 0xEB, 0x1E, 0x82, 0xD7, 0xEA, 0x1E, 0xE2, 0x3B, - 0x85, 0x9B, 0xE9, 0x1E, 0xC8, 0x90, 0x85, 0x94 -}; - -static const unsigned char patch_block9[64] = { - 0x02, 0xDE, 0x05, 0x80, 0x57, 0x93, 0xF0, 0xBA, - 0xAC, 0x06, 0x92, 0xEA, 0xE2, 0xBF, 0xE5, 0x06, - 0xA0, 0x01, 0xEB, 0xBF, 0x85, 0x88, 0xE9, 0x3E, - 0xC8, 0x90, 0x85, 0x81, 0xE9, 0x3E, 0xF0, 0xBA, - 0xF3, 0x39, 0xF0, 0x3A, 0x60, 0x17, 0xF0, 0x3A, - 0xC0, 0x90, 0xF0, 0xBA, 0xE1, 0x00, 0x00, 0x3F, - 0xE3, 0x02, 0xE3, 0x03, 0x58, 0x10, 0x60, 0x59, - 0xE6, 0x93, 0x0D, 0xA2, 0x58, 0x12, 0xE6, 0x93 -}; - -static const unsigned char patch_block10[64] = { - 0x0D, 0xAA, 0xE3, 0x98, 0xE3, 0x90, 0xE1, 0x00, - 0x03, 0x01, 0xE1, 0x00, 0x03, 0x03, 0x9B, 0x7D, - 0x8B, 0x8B, 0xE3, 0x02, 0xE3, 0x03, 0x58, 0x56, - 0x60, 0x59, 0xE6, 0x93, 0x0D, 0xBA, 0xE3, 0x98, - 0xE3, 0x90, 0xE1, 0x00, 0x03, 0x0F, 0x93, 0x11, - 0xE1, 0x00, 0xE3, 0x02, 0x4A, 0x11, 0x0B, 0x42, - 0x91, 0xAF, 0xE3, 0x90, 0xE1, 0x00, 0xF2, 0x91, - 0xF0, 0x91, 0xA3, 0xFE, 0xE1, 0x00, 0x60, 0x92 -}; - -static const unsigned char patch_block11[64] = { - 0xC0, 0x5F, 0xF0, 0x13, 0xF0, 0x13, 0x59, 0x5B, - 0xE2, 0x13, 0xF0, 0x11, 0x5A, 0x19, 0xE2, 0x13, - 0xE1, 0x00, 0x00, 0x00, 0x03, 0x27, 0x68, 0x61, - 0x76, 0x61, 0x6E, 0x61, 0x00, 0x06, 0x03, 0x2C, - 0xE3, 0x02, 0xE3, 0x03, 0xE9, 0x38, 0x59, 0x15, - 0x59, 0x5A, 0xF2, 0x9A, 0xBC, 0x0B, 0xA4, 0x0A, - 0x59, 0x1E, 0xF3, 0x11, 0xF0, 0x1A, 0xE2, 0xBB, - 0x59, 0x15, 0xF0, 0x11, 0x19, 0x2A, 0xE5, 0x02 -}; - -static const unsigned char patch_block12[54] = { - 0xA4, 0x01, 0xEB, 0xBF, 0xE3, 0x98, 0xE3, 0x90, - 0xE1, 0x00, 0x03, 0x42, 0x19, 0x28, 0xE1, 0x00, - 0xE9, 0x30, 0x60, 0x79, 0xE1, 0x00, 0xE3, 0x03, - 0xE3, 0x07, 0x60, 0x79, 0x93, 0x4E, 0xE3, 0xB8, - 0xE3, 0x98, 0xE1, 0x00, 0xE9, 0x1A, 0xF0, 0x1F, - 0xE2, 0x33, 0xF0, 0x91, 0xE2, 0x92, 0xE0, 0x32, - 0xF0, 0x31, 0xE1, 0x00, 0x00, 0x00 -}; - -static const unsigned char do_call[1] = { - 0x01 -}; - - -#define PATCH_DATA_SIZE 18 - -static const cpia2_patch patch_data[PATCH_DATA_SIZE] = { - {0x0A, sizeof(start_address_hi), start_address_hi} - , // 0 - {0x0B, sizeof(start_address_lo), start_address_lo} - , // 1 - {0x0C, sizeof(patch_block0), patch_block0} - , // 2 - {0x0C, sizeof(patch_block1), patch_block1} - , // 3 - {0x0C, sizeof(patch_block2), patch_block2} - , // 4 - {0x0C, sizeof(patch_block3), patch_block3} - , // 5 - {0x0C, sizeof(patch_block4), patch_block4} - , // 6 - {0x0C, sizeof(patch_block5), patch_block5} - , // 7 - {0x0C, sizeof(patch_block6), patch_block6} - , // 8 - {0x0C, sizeof(patch_block7), patch_block7} - , // 9 - {0x0C, sizeof(patch_block8), patch_block8} - , // 10 - {0x0C, sizeof(patch_block9), patch_block9} - , //11 - {0x0C, sizeof(patch_block10), patch_block10} - , // 12 - {0x0C, sizeof(patch_block11), patch_block11} - , // 13 - {0x0C, sizeof(patch_block12), patch_block12} - , // 14 - {0x0A, sizeof(start_address_hi), start_address_hi} - , // 15 - {0x0B, sizeof(start_address_lo), start_address_lo} - , // 16 - {0x0D, sizeof(do_call), do_call} //17 -}; - - -#endif diff --git a/firmware/Makefile b/firmware/Makefile index 2f81089dfd2c..8d5465fefd00 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -60,6 +60,7 @@ fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \ # whiteheat_loader_debug.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw +fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-) diff --git a/firmware/WHENCE b/firmware/WHENCE index 6c7b0b44712d..d8f6199d087a 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -236,3 +236,16 @@ Licence: Unknown Found in hex form in kernel source. -------------------------------------------------------------------------- + +Driver: CPiA2 -- cameras based on Vision's CPiA2 + +File: cpia2/stv0672_vp4.bin + +Licence: Allegedly GPLv2+, but no source visible. Marked: + Copyright (C) 2001 STMicroelectronics, Inc. + Contact: steve.miller@st.com + Description: This file contains patch data for the CPiA2 (stv0672) VP4. + +Found in hex form in kernel source. + +-------------------------------------------------------------------------- diff --git a/firmware/cpia2/stv0672_vp4.bin.ihex b/firmware/cpia2/stv0672_vp4.bin.ihex new file mode 100644 index 000000000000..bd0b9cf65640 --- /dev/null +++ b/firmware/cpia2/stv0672_vp4.bin.ihex @@ -0,0 +1,73 @@ +:1000000001BCE302E303E304E305E306E3079344EF +:1000100056D4934E5651934E51D6934E4F54934EC1 +:10002000924F92A4930592F4931B929291E692368A +:100030009274924A928C928EC8D00B4202A0CA92BD +:100040000902C9100A0A0A81E3B8E3B0E3A8E3A0F1 +:10005000E398E390E100CFD70A12CC9508B20A18D2 +:10006000E10001EE0C084A12C818F09AC022F31CF5 +:100070004A13F314C8A0F214F21CEB13D3A26316B4 +:10008000489EF018A403F393C058F713519CE9203D +:10009000CFEF63F9922ED35F63FA922ED36763FB9F +:1000A000922ED36FE91A631648A7F020A406F394A2 +:1000B000C027F714F513519DF6136318C420CBEF36 +:1000C00063FC922ED37763FD922ED37F63FE922E34 +:1000D000D38763FF922ED38F6438922ED3976439DF +:1000E000922ED39FE100F53AF43BF7BFF2BCF23D0C +:1000F000E1008087908051D5022202324BD3F71164 +:100100000BDAE1000E0202400DB5E3024855E5129C +:10011000A401E81BE390F018A401E8BF8DB84BD10F +:100120004BD80BCB0BC2E100E302E30352D360597F +:10013000E6930D2252D4E6930D2AE398E390E10072 +:10014000025D0263E302C81202CAC85202C2826898 +:10015000E302C81402CAC89002C20AD0C9930ADADC +:10016000CCD20AE2631202DA0A980AA00AA8E39043 +:10017000E100E3020AD0C9930ADACCD20AE26312A0 +:1001800002DA0A980AA00AA84991E56AA404C812EA +:1001900002CAC8528289C81402CAC89002C2E39037 +:1001A000E1000860E1004853E897085AE100E302E3 +:1001B000E30354D36059E6930D52E398E390E100D2 +:1001C000029CE3025513931755139317E390E10034 +:1001D0007530E302E30355556059E6930DB2E39899 +:1001E000E390E10002AEE792E918EA9AE898E81095 +:1001F000E811E851D2DAD2F3E813D2FAE850D2EAA1 +:10020000E8D0E8D1D30A03094823E52CA003482409 +:10021000EA1C0308D2E3D303D313E10002CB059316 +:100220005793F09AAC0BE30792EAE29FE506E3B03E +:10023000A002EB1E82D7EA1EE23B859BE91EC89016 +:10024000859402DE05805793F0BAAC0692EAE2BFCD +:10025000E506A001EBBF8588E93EC8908581E93EAF +:10026000F0BAF339F03A6017F03AC090F0BAE10012 +:10027000003FE302E30358106059E6930DA25812C1 +:10028000E6930DAAE398E390E1000301E100030384 +:100290009B7D8B8BE302E30358566059E6930DBABE +:1002A000E398E390E100030F9311E100E3024A11A8 +:1002B0000B4291AFE390E100F291F091A3FEE100D7 +:1002C0006092C05FF013F013595BE213F0115A19FA +:1002D000E213E10000000327686176616E610006A9 +:1002E000032CE302E303E9385915595AF29ABC0B7F +:1002F000A40A591EF311F01AE2BB5915F011192A7C +:10030000E502A401EBBFE398E390E1000342192862 +:10031000E100E9306079E100E303E3076079934E9F +:10032000E3B8E398E100E91AF01FE233F091E292BA +:08033000E032F031E1000000B1 +:00000001FF + + Copyright 2001, STMicrolectronics, Inc. + Contact: steve.miller@st.com + + Description: + This file contains patch data for the CPiA2 (stv0672) VP4. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -- cgit v1.2.3 From c466774636b3cc43c2c304b44e52974d9d53f3e0 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 23 Jun 2008 11:41:04 +0100 Subject: dabusb: use request_firmware() Signed-off-by: David Woodhouse --- drivers/media/video/dabfirmware.h | 1415 ------------------------------------ drivers/media/video/dabusb.c | 44 +- firmware/Makefile | 3 + firmware/WHENCE | 16 + firmware/dabusb/bitstream.bin.ihex | 761 +++++++++++++++++++ firmware/dabusb/firmware.HEX | 649 +++++++++++++++++ 6 files changed, 1461 insertions(+), 1427 deletions(-) delete mode 100644 drivers/media/video/dabfirmware.h create mode 100644 firmware/dabusb/bitstream.bin.ihex create mode 100644 firmware/dabusb/firmware.HEX diff --git a/drivers/media/video/dabfirmware.h b/drivers/media/video/dabfirmware.h deleted file mode 100644 index cbd92635993d..000000000000 --- a/drivers/media/video/dabfirmware.h +++ /dev/null @@ -1,1415 +0,0 @@ -/* - * dabdata.h - dab usb firmware and bitstream data - * - * Copyright (C) 1999 BayCom GmbH - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that redistributions of source - * code retain the above copyright notice and this comment without - * modification. - */ - -static INTEL_HEX_RECORD firmware[] = { - -{ 2, 0x0000, 0, {0x21,0x57} }, -{ 3, 0x0003, 0, {0x02,0x01,0x66} }, -{ 3, 0x000b, 0, {0x02,0x01,0x66} }, -{ 3, 0x0013, 0, {0x02,0x01,0x66} }, -{ 3, 0x001b, 0, {0x02,0x01,0x66} }, -{ 3, 0x0023, 0, {0x02,0x01,0x66} }, -{ 3, 0x002b, 0, {0x02,0x01,0x66} }, -{ 3, 0x0033, 0, {0x02,0x03,0x0f} }, -{ 3, 0x003b, 0, {0x02,0x01,0x66} }, -{ 3, 0x0043, 0, {0x02,0x01,0x00} }, -{ 3, 0x004b, 0, {0x02,0x01,0x66} }, -{ 3, 0x0053, 0, {0x02,0x01,0x66} }, -{ 3, 0x005b, 0, {0x02,0x04,0xbd} }, -{ 3, 0x0063, 0, {0x02,0x01,0x67} }, -{ 3, 0x0100, 0, {0x02,0x0c,0x5a} }, -{ 3, 0x0104, 0, {0x02,0x01,0xed} }, -{ 3, 0x0108, 0, {0x02,0x02,0x51} }, -{ 3, 0x010c, 0, {0x02,0x02,0x7c} }, -{ 3, 0x0110, 0, {0x02,0x02,0xe4} }, -{ 1, 0x0114, 0, {0x32} }, -{ 1, 0x0118, 0, {0x32} }, -{ 3, 0x011c, 0, {0x02,0x05,0xfd} }, -{ 3, 0x0120, 0, {0x02,0x00,0x00} }, -{ 3, 0x0124, 0, {0x02,0x00,0x00} }, -{ 3, 0x0128, 0, {0x02,0x04,0x3c} }, -{ 3, 0x012c, 0, {0x02,0x04,0x6a} }, -{ 3, 0x0130, 0, {0x02,0x00,0x00} }, -{ 3, 0x0134, 0, {0x02,0x00,0x00} }, -{ 3, 0x0138, 0, {0x02,0x00,0x00} }, -{ 3, 0x013c, 0, {0x02,0x00,0x00} }, -{ 3, 0x0140, 0, {0x02,0x00,0x00} }, -{ 3, 0x0144, 0, {0x02,0x00,0x00} }, -{ 3, 0x0148, 0, {0x02,0x00,0x00} }, -{ 3, 0x014c, 0, {0x02,0x00,0x00} }, -{ 3, 0x0150, 0, {0x02,0x00,0x00} }, -{ 3, 0x0154, 0, {0x02,0x00,0x00} }, -{ 10, 0x0157, 0, {0x75,0x81,0x7f,0xe5,0x82,0x60,0x03,0x02,0x01,0x61} }, -{ 5, 0x0161, 0, {0x12,0x07,0x6f,0x21,0x64} }, -{ 1, 0x0166, 0, {0x32} }, -{ 14, 0x0167, 0, {0xc0,0xd0,0xc0,0x86,0xc0,0x82,0xc0,0x83,0xc0,0xe0,0x90,0x7f,0x97,0xe0} }, -{ 14, 0x0175, 0, {0x44,0x80,0xf0,0x90,0x7f,0x69,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} }, -{ 14, 0x0183, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} }, -{ 14, 0x0191, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0x90,0x7f,0x97,0xe0} }, -{ 3, 0x019f, 0, {0x55,0x7f,0xf0} }, -{ 14, 0x01a2, 0, {0x90,0x7f,0x9a,0xe0,0x30,0xe4,0x23,0x90,0x7f,0x68,0xf0,0xf0,0xf0,0xf0} }, -{ 14, 0x01b0, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} }, -{ 14, 0x01be, 0, {0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0} }, -{ 14, 0x01cc, 0, {0xe5,0xd8,0xc2,0xe3,0xf5,0xd8,0xd0,0xe0,0xd0,0x83,0xd0,0x82,0xd0,0x86} }, -{ 3, 0x01da, 0, {0xd0,0xd0,0x32} }, -{ 8, 0x01dd, 0, {0x75,0x86,0x00,0x90,0xff,0xc3,0x7c,0x05} }, -{ 7, 0x01e5, 0, {0xa3,0xe5,0x82,0x45,0x83,0x70,0xf9} }, -{ 1, 0x01ec, 0, {0x22} }, -{ 14, 0x01ed, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0xd0} }, -{ 14, 0x01fb, 0, {0x75,0xd0,0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91} }, -{ 13, 0x0209, 0, {0x90,0x88,0x00,0xe0,0xf5,0x41,0x90,0x7f,0xab,0x74,0x02,0xf0,0x90} }, -{ 9, 0x0216, 0, {0x7f,0xab,0x74,0x02,0xf0,0xe5,0x32,0x60,0x21} }, -{ 4, 0x021f, 0, {0x7a,0x00,0x7b,0x00} }, -{ 11, 0x0223, 0, {0xc3,0xea,0x94,0x18,0xeb,0x64,0x80,0x94,0x80,0x50,0x12} }, -{ 14, 0x022e, 0, {0x90,0x7f,0x69,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0xf0,0x0a,0xba,0x00} }, -{ 2, 0x023c, 0, {0x01,0x0b} }, -{ 2, 0x023e, 0, {0x80,0xe3} }, -{ 2, 0x0240, 0, {0xd0,0x86} }, -{ 14, 0x0242, 0, {0xd0,0xd0,0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0} }, -{ 1, 0x0250, 0, {0x32} }, -{ 14, 0x0251, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, -{ 14, 0x025f, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xab,0x74} }, -{ 4, 0x026d, 0, {0x04,0xf0,0xd0,0x86} }, -{ 11, 0x0271, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, -{ 14, 0x027c, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} }, -{ 14, 0x028a, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} }, -{ 13, 0x0298, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90} }, -{ 12, 0x02a5, 0, {0x7f,0xab,0x74,0x08,0xf0,0x75,0x6e,0x00,0x75,0x6f,0x02,0x12} }, -{ 6, 0x02b1, 0, {0x11,0x44,0x75,0x70,0x39,0x75} }, -{ 6, 0x02b7, 0, {0x71,0x0c,0x75,0x72,0x02,0x12} }, -{ 12, 0x02bd, 0, {0x11,0x75,0x90,0x7f,0xd6,0xe4,0xf0,0x75,0xd8,0x20,0xd0,0x86} }, -{ 14, 0x02c9, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} }, -{ 13, 0x02d7, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, -{ 14, 0x02e4, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, -{ 14, 0x02f2, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xab,0x74} }, -{ 4, 0x0300, 0, {0x10,0xf0,0xd0,0x86} }, -{ 11, 0x0304, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, -{ 14, 0x030f, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} }, -{ 14, 0x031d, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} }, -{ 12, 0x032b, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0x75,0x6e,0x00,0x75,0x6f,0x02} }, -{ 7, 0x0337, 0, {0x12,0x11,0x44,0x75,0x70,0x40,0x75} }, -{ 6, 0x033e, 0, {0x71,0x0c,0x75,0x72,0x02,0x12} }, -{ 14, 0x0344, 0, {0x11,0x75,0x90,0x7f,0xd6,0x74,0x02,0xf0,0x90,0x7f,0xd6,0x74,0x06,0xf0} }, -{ 5, 0x0352, 0, {0x75,0xd8,0x10,0xd0,0x86} }, -{ 14, 0x0357, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} }, -{ 13, 0x0365, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, -{ 13, 0x0372, 0, {0x90,0x7f,0xa5,0x74,0x80,0xf0,0x90,0x7f,0xa6,0x74,0x9a,0xf0,0x12} }, -{ 12, 0x037f, 0, {0x10,0x1b,0x90,0x7f,0xa6,0xe5,0x42,0xf0,0x12,0x10,0x1b,0x90} }, -{ 13, 0x038b, 0, {0x7f,0xa6,0xe5,0x43,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa5,0x74,0x40} }, -{ 1, 0x0398, 0, {0xf0} }, -{ 1, 0x0399, 0, {0x22} }, -{ 13, 0x039a, 0, {0x90,0x7f,0xa5,0x74,0x80,0xf0,0x90,0x7f,0xa6,0x74,0x9a,0xf0,0x12} }, -{ 12, 0x03a7, 0, {0x10,0x1b,0x90,0x7f,0xa6,0xe5,0x44,0xf0,0x12,0x10,0x1b,0x90} }, -{ 12, 0x03b3, 0, {0x7f,0xa6,0xe5,0x45,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa6,0xe5} }, -{ 11, 0x03bf, 0, {0x46,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa5,0x74,0x40,0xf0} }, -{ 1, 0x03ca, 0, {0x22} }, -{ 10, 0x03cb, 0, {0x75,0x44,0x02,0x75,0x45,0x00,0x75,0x46,0x00,0x12} }, -{ 9, 0x03d5, 0, {0x03,0x9a,0x75,0x42,0x03,0x75,0x43,0x00,0x12} }, -{ 2, 0x03de, 0, {0x03,0x72} }, -{ 1, 0x03e0, 0, {0x22} }, -{ 12, 0x03e1, 0, {0x90,0x88,0x00,0xe5,0x36,0xf0,0x90,0x88,0x00,0x74,0x10,0x25} }, -{ 9, 0x03ed, 0, {0x36,0xf0,0x12,0x01,0xdd,0x75,0x42,0x01,0x75} }, -{ 9, 0x03f6, 0, {0x43,0x18,0x12,0x03,0x72,0x75,0x44,0x02,0x75} }, -{ 9, 0x03ff, 0,{0x45,0x00,0x75,0x46,0x00,0x12,0x03,0x9a,0x75} }, -{ 8, 0x0408, 0,{0x42,0x03,0x75,0x43,0x44,0x12,0x03,0x72} }, -{ 1, 0x0410, 0,{0x22} }, -{ 14, 0x0411, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, -{ 14, 0x041f, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xaa,0x74} }, -{ 4, 0x042d, 0, {0x02,0xf0,0xd0,0x86} }, -{ 11, 0x0431, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, -{ 14, 0x043c, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, -{ 14, 0x044a, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xa9,0x74} }, -{ 7, 0x0458, 0, {0x04,0xf0,0x75,0x30,0x01,0xd0,0x86} }, -{ 11, 0x045f, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, -{ 14, 0x046a, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, -{ 14, 0x0478, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90,0x7f,0xaa,0x74} }, -{ 7, 0x0486, 0, {0x04,0xf0,0x75,0x31,0x01,0xd0,0x86} }, -{ 11, 0x048d, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, -{ 14, 0x0498, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, -{ 12, 0x04a6, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe5,0xf5,0x91,0xd0,0x86} }, -{ 11, 0x04b2, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, -{ 14, 0x04bd, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0xd0,0x75,0xd0,0x00,0xc0} }, -{ 12, 0x04cb, 0, {0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe7,0xf5,0x91,0xd0,0x86} }, -{ 11, 0x04d7, 0, {0xd0,0xd0,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, -{ 12, 0x04e2, 0, {0x90,0x7f,0xea,0xe0,0xfa,0x8a,0x20,0x90,0x7f,0x96,0xe4,0xf0} }, -{ 1, 0x04ee, 0, {0x22} }, -{ 7, 0x04ef, 0, {0x90,0x7f,0xea,0xe0,0xfa,0x8a,0x21} }, -{ 1, 0x04f6, 0, {0x22} }, -{ 14, 0x04f7, 0, {0x90,0x17,0x13,0xe0,0xfa,0x90,0x17,0x15,0xe0,0xfb,0x74,0x80,0x2a,0xfa} }, -{ 14, 0x0505, 0, {0x74,0x80,0x2b,0xfb,0xea,0x03,0x03,0x54,0x3f,0xfc,0xea,0xc4,0x23,0x54} }, -{ 14, 0x0513, 0, {0x1f,0xfa,0x2c,0xfa,0xeb,0x03,0x03,0x54,0x3f,0xfc,0xeb,0xc4,0x23,0x54} }, -{ 11, 0x0521, 0, {0x1f,0xfb,0x2c,0xfb,0x90,0x17,0x0a,0xe0,0xfc,0x60,0x02} }, -{ 2, 0x052c, 0, {0x7a,0x00} }, -{ 7, 0x052e, 0, {0x90,0x17,0x0c,0xe0,0xfc,0x60,0x02} }, -{ 2, 0x0535, 0, {0x7b,0x00} }, -{ 11, 0x0537, 0, {0xea,0x2b,0xfc,0xc3,0x13,0xf5,0x3a,0x75,0x44,0x02,0x8b} }, -{ 7, 0x0542, 0, {0x45,0x8a,0x46,0x12,0x03,0x9a,0x75} }, -{ 9, 0x0549, 0, {0x6e,0x08,0x75,0x6f,0x00,0x12,0x11,0x44,0x75} }, -{ 4, 0x0552, 0, {0x70,0x47,0x75,0x71} }, -{ 8, 0x0556, 0, {0x0c,0x75,0x72,0x02,0x12,0x11,0x75,0x85} }, -{ 5, 0x055e, 0, {0x3a,0x73,0x12,0x11,0xa0} }, -{ 1, 0x0563, 0, {0x22} }, -{ 14, 0x0564, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x80,0x65,0x02,0xf0,0x90} }, -{ 14, 0x0572, 0, {0x7f,0xeb,0xe0,0xfa,0x90,0x7f,0xea,0xe0,0xfb,0x90,0x7f,0xef,0xe0,0xfc} }, -{ 14, 0x0580, 0, {0x33,0x95,0xe0,0xfd,0x8c,0x05,0x7c,0x00,0x90,0x7f,0xee,0xe0,0xfe,0x33} }, -{ 14, 0x058e, 0, {0x95,0xe0,0xff,0xec,0x2e,0xfc,0xed,0x3f,0xfd,0x90,0x7f,0xe9,0xe0,0xfe} }, -{ 5, 0x059c, 0, {0xbe,0x01,0x02,0x80,0x03} }, -{ 3, 0x05a1, 0, {0x02,0x05,0xf9} }, -{ 6, 0x05a4, 0, {0xbc,0x01,0x21,0xbd,0x00,0x1e} }, -{ 14, 0x05aa, 0, {0xea,0xc4,0x03,0x54,0xf8,0xfc,0xeb,0x25,0xe0,0xfd,0x2c,0x24,0x00,0xfc} }, -{ 14, 0x05b8, 0, {0xe4,0x34,0x17,0xfd,0x90,0x7e,0xc0,0xe0,0xfe,0x8c,0x82,0x8d,0x83,0xf0} }, -{ 2, 0x05c6, 0, {0x80,0x31} }, -{ 14, 0x05c8, 0, {0xea,0xc4,0x03,0x54,0xf8,0xfa,0xeb,0x25,0xe0,0xfb,0x2a,0xfa,0x24,0x00} }, -{ 14, 0x05d6, 0, {0xfb,0xe4,0x34,0x17,0xfc,0x90,0x7e,0xc0,0xe0,0xfd,0x8b,0x82,0x8c,0x83} }, -{ 14, 0x05e4, 0, {0xf0,0x74,0x01,0x2a,0x24,0x00,0xfa,0xe4,0x34,0x17,0xfb,0x90,0x7e,0xc1} }, -{ 7, 0x05f2, 0, {0xe0,0xfc,0x8a,0x82,0x8b,0x83,0xf0} }, -{ 3, 0x05f9, 0, {0x75,0x38,0x01} }, -{ 1, 0x05fc, 0, {0x22} }, -{ 14, 0x05fd, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} }, -{ 14, 0x060b, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} }, -{ 13, 0x0619, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90} }, -{ 13, 0x0626, 0, {0x7f,0xaa,0x74,0x01,0xf0,0x12,0x05,0x64,0x75,0x37,0x00,0xd0,0x86} }, -{ 14, 0x0633, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} }, -{ 13, 0x0641, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, -{ 14, 0x064e, 0, {0x90,0x7f,0xeb,0xe0,0xfa,0x90,0x7f,0xea,0xe0,0xfb,0x90,0x7f,0xee,0xe0} }, -{ 14, 0x065c, 0, {0xfc,0x33,0x95,0xe0,0xfd,0x90,0x7f,0x96,0xe0,0xfe,0x90,0x7f,0x96,0x74} }, -{ 14, 0x066a, 0, {0x80,0x65,0x06,0xf0,0x90,0x7f,0x00,0x74,0x01,0xf0,0xea,0xc4,0x03,0x54} }, -{ 14, 0x0678, 0, {0xf8,0xfe,0xeb,0x25,0xe0,0xfb,0x2e,0xfe,0x24,0x00,0xfb,0xe4,0x34,0x17} }, -{ 14, 0x0686, 0, {0xff,0x8b,0x82,0x8f,0x83,0xe0,0xfb,0x74,0x01,0x2e,0x24,0x00,0xfe,0xe4} }, -{ 14, 0x0694, 0, {0x34,0x17,0xff,0x8e,0x82,0x8f,0x83,0xe0,0xfe,0x90,0x7f,0xe9,0xe0,0xff} }, -{ 3, 0x06a2, 0, {0xbf,0x81,0x0a} }, -{ 10, 0x06a5, 0, {0x90,0x7f,0x00,0xeb,0xf0,0x90,0x7f,0x01,0xee,0xf0} }, -{ 8, 0x06af, 0, {0x90,0x7f,0xe9,0xe0,0xfb,0xbb,0x82,0x1a} }, -{ 3, 0x06b7, 0, {0xba,0x01,0x0c} }, -{ 12, 0x06ba, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x80,0x0b} }, -{ 11, 0x06c6, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0x74,0xb5,0xf0} }, -{ 8, 0x06d1, 0, {0x90,0x7f,0xe9,0xe0,0xfb,0xbb,0x83,0x1b} }, -{ 3, 0x06d9, 0, {0xba,0x01,0x0d} }, -{ 13, 0x06dc, 0, {0x90,0x7f,0x00,0x74,0x01,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x80,0x0b} }, -{ 11, 0x06e9, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0x74,0x12,0xf0} }, -{ 8, 0x06f4, 0, {0x90,0x7f,0xe9,0xe0,0xfb,0xbb,0x84,0x1c} }, -{ 3, 0x06fc, 0, {0xba,0x01,0x0d} }, -{ 13, 0x06ff, 0, {0x90,0x7f,0x00,0x74,0x01,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x80,0x0c} }, -{ 12, 0x070c, 0, {0x90,0x7f,0x00,0x74,0x80,0xf0,0x90,0x7f,0x01,0x74,0x01,0xf0} }, -{ 5, 0x0718, 0, {0x90,0x7f,0xb5,0xec,0xf0} }, -{ 1, 0x071d, 0, {0x22} }, -{ 12, 0x071e, 0, {0x75,0x36,0x0d,0x90,0x88,0x00,0x74,0x1d,0xf0,0x75,0x6b,0x80} }, -{ 10, 0x072a, 0, {0x75,0x6c,0x3c,0x12,0x10,0xe2,0x75,0x6b,0x80,0x75} }, -{ 9, 0x0734, 0, {0x6c,0x0f,0x12,0x10,0xe2,0x75,0x6b,0x80,0x75} }, -{ 9, 0x073d, 0, {0x6c,0x06,0x12,0x10,0xe2,0x75,0x6b,0x80,0x75} }, -{ 7, 0x0746, 0, {0x6c,0x01,0x12,0x10,0xe2,0x7a,0x00} }, -{ 3, 0x074d, 0, {0xba,0xff,0x00} }, -{ 2, 0x0750, 0, {0x50,0x0a} }, -{ 10, 0x0752, 0, {0xc0,0x02,0x12,0x01,0xdd,0xd0,0x02,0x0a,0x80,0xf1} }, -{ 10, 0x075c, 0, {0x75,0x6b,0x80,0x75,0x6c,0x3c,0x12,0x10,0xe2,0x75} }, -{ 8, 0x0766, 0, {0x6b,0x80,0x75,0x6c,0x0f,0x12,0x10,0xe2} }, -{ 1, 0x076e, 0, {0x22} }, -{ 14, 0x076f, 0, {0x90,0x7f,0xa1,0xe4,0xf0,0x90,0x7f,0xaf,0x74,0x01,0xf0,0x90,0x7f,0x92} }, -{ 14, 0x077d, 0, {0x74,0x02,0xf0,0x75,0x8e,0x31,0x75,0x89,0x21,0x75,0x88,0x00,0x75,0xc8} }, -{ 14, 0x078b, 0, {0x00,0x75,0x8d,0x40,0x75,0x98,0x40,0x75,0xc0,0x40,0x75,0x87,0x00,0x75} }, -{ 9, 0x0799, 0, {0x20,0x00,0x75,0x21,0x00,0x75,0x22,0x00,0x75} }, -{ 5, 0x07a2, 0, {0x23,0x00,0x75,0x47,0x00} }, -{ 7, 0x07a7, 0, {0xc3,0xe5,0x47,0x94,0x20,0x50,0x11} }, -{ 13, 0x07ae, 0, {0xe5,0x47,0x24,0x00,0xf5,0x82,0xe4,0x34,0x17,0xf5,0x83,0xe4,0xf0} }, -{ 4, 0x07bb, 0, {0x05,0x47,0x80,0xe8} }, -{ 9, 0x07bf, 0, {0xe4,0xf5,0x40,0xf5,0x3f,0xe4,0xf5,0x3c,0xf5} }, -{ 7, 0x07c8, 0, {0x3b,0xe4,0xf5,0x3e,0xf5,0x3d,0x75} }, -{ 11, 0x07cf, 0, {0x32,0x00,0x75,0x37,0x00,0x75,0x39,0x00,0x90,0x7f,0x93} }, -{ 14, 0x07da, 0, {0x74,0x3c,0xf0,0x90,0x7f,0x9c,0x74,0xff,0xf0,0x90,0x7f,0x96,0x74,0x80} }, -{ 14, 0x07e8, 0, {0xf0,0x90,0x7f,0x94,0x74,0x70,0xf0,0x90,0x7f,0x9d,0x74,0x8f,0xf0,0x90} }, -{ 14, 0x07f6, 0, {0x7f,0x97,0xe4,0xf0,0x90,0x7f,0x95,0x74,0xc2,0xf0,0x90,0x7f,0x98,0x74} }, -{ 14, 0x0804, 0, {0x28,0xf0,0x90,0x7f,0x9e,0x74,0x28,0xf0,0x90,0x7f,0xf0,0xe4,0xf0,0x90} }, -{ 14, 0x0812, 0, {0x7f,0xf1,0xe4,0xf0,0x90,0x7f,0xf2,0xe4,0xf0,0x90,0x7f,0xf3,0xe4,0xf0} }, -{ 14, 0x0820, 0, {0x90,0x7f,0xf4,0xe4,0xf0,0x90,0x7f,0xf5,0xe4,0xf0,0x90,0x7f,0xf6,0xe4} }, -{ 14, 0x082e, 0, {0xf0,0x90,0x7f,0xf7,0xe4,0xf0,0x90,0x7f,0xf8,0xe4,0xf0,0x90,0x7f,0xf9} }, -{ 14, 0x083c, 0, {0x74,0x38,0xf0,0x90,0x7f,0xfa,0x74,0xa0,0xf0,0x90,0x7f,0xfb,0x74,0xa0} }, -{ 14, 0x084a, 0, {0xf0,0x90,0x7f,0xfc,0x74,0xa0,0xf0,0x90,0x7f,0xfd,0x74,0xa0,0xf0,0x90} }, -{ 14, 0x0858, 0, {0x7f,0xfe,0x74,0xa0,0xf0,0x90,0x7f,0xff,0x74,0xa0,0xf0,0x90,0x7f,0xe0} }, -{ 14, 0x0866, 0, {0x74,0x03,0xf0,0x90,0x7f,0xe1,0x74,0x01,0xf0,0x90,0x7f,0xdd,0x74,0x80} }, -{ 11, 0x0874, 0, {0xf0,0x12,0x12,0x43,0x12,0x07,0x1e,0x7a,0x00,0x7b,0x00} }, -{ 9, 0x087f, 0, {0xc3,0xea,0x94,0x1e,0xeb,0x94,0x00,0x50,0x17} }, -{ 12, 0x0888, 0, {0x90,0x88,0x00,0xe0,0xf5,0x47,0x90,0x88,0x0b,0xe0,0xf5,0x47} }, -{ 9, 0x0894, 0, {0x90,0x7f,0x68,0xf0,0x0a,0xba,0x00,0x01,0x0b} }, -{ 2, 0x089d, 0, {0x80,0xe0} }, -{ 12, 0x089f, 0, {0x12,0x03,0xe1,0x90,0x7f,0xd6,0xe4,0xf0,0x7a,0x00,0x7b,0x00} }, -{ 13, 0x08ab, 0, {0x8a,0x04,0x8b,0x05,0xc3,0xea,0x94,0xe0,0xeb,0x94,0x2e,0x50,0x1a} }, -{ 14, 0x08b8, 0, {0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0} }, -{ 10, 0x08c6, 0, {0x04,0xd0,0x03,0xd0,0x02,0x0a,0xba,0x00,0x01,0x0b} }, -{ 2, 0x08d0, 0, {0x80,0xd9} }, -{ 13, 0x08d2, 0, {0x90,0x7f,0xd6,0x74,0x02,0xf0,0x90,0x7f,0xd6,0x74,0x06,0xf0,0x90} }, -{ 14, 0x08df, 0, {0x7f,0xde,0x74,0x05,0xf0,0x90,0x7f,0xdf,0x74,0x05,0xf0,0x90,0x7f,0xac} }, -{ 14, 0x08ed, 0, {0xe4,0xf0,0x90,0x7f,0xad,0x74,0x05,0xf0,0x75,0xa8,0x80,0x75,0xf8,0x10} }, -{ 13, 0x08fb, 0, {0x90,0x7f,0xae,0x74,0x0b,0xf0,0x90,0x7f,0xe2,0x74,0x88,0xf0,0x90} }, -{ 12, 0x0908, 0, {0x7f,0xab,0x74,0x08,0xf0,0x75,0xe8,0x11,0x75,0x32,0x01,0x75} }, -{ 12, 0x0914, 0, {0x31,0x00,0x75,0x30,0x00,0xc0,0x04,0xc0,0x05,0x12,0x04,0xf7} }, -{ 10, 0x0920, 0, {0xd0,0x05,0xd0,0x04,0x75,0x34,0x00,0x75,0x35,0x01} }, -{ 13, 0x092a, 0, {0x90,0x7f,0xae,0x74,0x03,0xf0,0x8c,0x02,0xba,0x00,0x02,0x80,0x03} }, -{ 3, 0x0937, 0, {0x02,0x0a,0x3f} }, -{ 12, 0x093a, 0, {0x85,0x33,0x34,0x90,0x7f,0x9d,0x74,0x8f,0xf0,0x90,0x7f,0x97} }, -{ 14, 0x0946, 0, {0x74,0x08,0xf0,0x90,0x7f,0x9d,0x74,0x88,0xf0,0x90,0x7f,0x9a,0xe0,0xfa} }, -{ 12, 0x0954, 0, {0x74,0x05,0x5a,0xf5,0x33,0x90,0x7f,0x9d,0x74,0x8f,0xf0,0x90} }, -{ 13, 0x0960, 0, {0x7f,0x97,0x74,0x02,0xf0,0x90,0x7f,0x9d,0x74,0x82,0xf0,0xe5,0x33} }, -{ 13, 0x096d, 0, {0x25,0xe0,0xfa,0x90,0x7f,0x9a,0xe0,0x54,0x05,0xfb,0x4a,0xf5,0x33} }, -{ 2, 0x097a, 0, {0x60,0x0c} }, -{ 12, 0x097c, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x80,0x4a,0xf0} }, -{ 11, 0x0988, 0, {0x75,0x6e,0x00,0x75,0x6f,0x00,0xc0,0x04,0xc0,0x05,0x12} }, -{ 14, 0x0993, 0, {0x11,0x44,0xd0,0x05,0xd0,0x04,0x90,0x17,0x13,0xe0,0xfa,0x74,0x80,0x2a} }, -{ 6, 0x09a1, 0, {0xfa,0xe5,0x33,0xb4,0x04,0x29} }, -{ 3, 0x09a7, 0, {0xba,0xa0,0x00} }, -{ 2, 0x09aa, 0, {0x50,0x24} }, -{ 13, 0x09ac, 0, {0x90,0x17,0x13,0xe0,0x04,0xfb,0x0b,0x90,0x17,0x13,0xeb,0xf0,0x90} }, -{ 14, 0x09b9, 0, {0x17,0x13,0xe0,0xfb,0x90,0x17,0x15,0xf0,0xc0,0x02,0xc0,0x04,0xc0,0x05} }, -{ 9, 0x09c7, 0, {0x12,0x04,0xf7,0xd0,0x05,0xd0,0x04,0xd0,0x02} }, -{ 5, 0x09d0, 0, {0xe5,0x33,0xb4,0x02,0x26} }, -{ 6, 0x09d5, 0, {0xc3,0x74,0x04,0x9a,0x50,0x20} }, -{ 13, 0x09db, 0, {0x90,0x17,0x13,0xe0,0xfa,0x1a,0x1a,0x90,0x17,0x13,0xea,0xf0,0x90} }, -{ 13, 0x09e8, 0, {0x17,0x13,0xe0,0xfa,0x90,0x17,0x15,0xf0,0xc0,0x04,0xc0,0x05,0x12} }, -{ 6, 0x09f5, 0, {0x04,0xf7,0xd0,0x05,0xd0,0x04} }, -{ 5, 0x09fb, 0, {0xe5,0x33,0xb4,0x08,0x1d} }, -{ 4, 0x0a00, 0, {0xe5,0x34,0x70,0x19} }, -{ 10, 0x0a04, 0, {0x74,0x01,0x25,0x35,0x54,0x0f,0xf5,0x35,0x85,0x35} }, -{ 12, 0x0a0e, 0, {0x75,0x75,0x76,0x00,0xc0,0x04,0xc0,0x05,0x12,0x13,0xfe,0xd0} }, -{ 3, 0x0a1a, 0, {0x05,0xd0,0x04} }, -{ 5, 0x0a1d, 0, {0xe5,0x33,0xb4,0x01,0x1d} }, -{ 4, 0x0a22, 0, {0xe5,0x34,0x70,0x19} }, -{ 10, 0x0a26, 0, {0xe5,0x35,0x24,0xff,0x54,0x0f,0xf5,0x35,0x85,0x35} }, -{ 12, 0x0a30, 0, {0x75,0x75,0x76,0x00,0xc0,0x04,0xc0,0x05,0x12,0x13,0xfe,0xd0} }, -{ 3, 0x0a3c, 0, {0x05,0xd0,0x04} }, -{ 14, 0x0a3f, 0, {0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0,0x04,0x90,0x7f,0x96} }, -{ 14, 0x0a4d, 0, {0xe0,0xfa,0x90,0x7f,0x96,0x74,0x7f,0x5a,0xf0,0x90,0x7f,0x97,0x74,0x08} }, -{ 10, 0x0a5b, 0, {0xf0,0xc3,0xec,0x94,0x00,0xed,0x94,0x02,0x40,0x08} }, -{ 8, 0x0a65, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x20,0xe6,0x08} }, -{ 8, 0x0a6d, 0, {0xc3,0xe4,0x9c,0x74,0x08,0x9d,0x50,0x13} }, -{ 14, 0x0a75, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x40,0x65,0x02,0xf0,0x7c} }, -{ 5, 0x0a83, 0, {0x00,0x7d,0x00,0x80,0x05} }, -{ 5, 0x0a88, 0, {0x0c,0xbc,0x00,0x01,0x0d} }, -{ 5, 0x0a8d, 0, {0xe5,0x38,0xb4,0x01,0x0e} }, -{ 13, 0x0a92, 0, {0xc0,0x04,0xc0,0x05,0x12,0x04,0xf7,0xd0,0x05,0xd0,0x04,0x75,0x38} }, -{ 1, 0x0a9f, 0, {0x00} }, -{ 7, 0x0aa0, 0, {0xe5,0x31,0x70,0x03,0x02,0x09,0x2a} }, -{ 10, 0x0aa7, 0, {0x90,0x7f,0xc9,0xe0,0xfa,0x70,0x03,0x02,0x0c,0x2d} }, -{ 14, 0x0ab1, 0, {0x90,0x7f,0x96,0xe0,0xfa,0x90,0x7f,0x96,0x74,0x80,0x65,0x02,0xf0,0x90} }, -{ 9, 0x0abf, 0, {0x7d,0xc0,0xe0,0xfa,0xba,0x2c,0x02,0x80,0x03} }, -{ 3, 0x0ac8, 0, {0x02,0x0b,0x36} }, -{ 5, 0x0acb, 0, {0x75,0x32,0x00,0x7b,0x00} }, -{ 3, 0x0ad0, 0, {0xbb,0x64,0x00} }, -{ 2, 0x0ad3, 0, {0x50,0x1c} }, -{ 14, 0x0ad5, 0, {0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0} }, -{ 13, 0x0ae3, 0, {0x04,0xd0,0x03,0xd0,0x02,0x90,0x88,0x0f,0xe0,0xf5,0x47,0x0b,0x80} }, -{ 1, 0x0af0, 0, {0xdf} }, -{ 13, 0x0af1, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x07,0x1e,0x12,0x03,0xe1,0x12} }, -{ 12, 0x0afe, 0, {0x04,0xf7,0xd0,0x05,0xd0,0x04,0xd0,0x02,0x75,0x6e,0x00,0x75} }, -{ 13, 0x0b0a, 0, {0x6f,0x01,0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x11,0x44,0xd0,0x05} }, -{ 9, 0x0b17, 0, {0xd0,0x04,0xd0,0x02,0x75,0x70,0x4d,0x75,0x71} }, -{ 11, 0x0b20, 0, {0x0c,0x75,0x72,0x02,0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12} }, -{ 11, 0x0b2b, 0, {0x11,0x75,0xd0,0x05,0xd0,0x04,0xd0,0x02,0x02,0x0c,0x2d} }, -{ 3, 0x0b36, 0, {0xba,0x2a,0x3b} }, -{ 13, 0x0b39, 0, {0x90,0x7f,0x98,0x74,0x20,0xf0,0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12} }, -{ 14, 0x0b46, 0, {0x01,0xdd,0xd0,0x05,0xd0,0x04,0xd0,0x02,0x90,0x7f,0x98,0x74,0x28,0xf0} }, -{ 2, 0x0b54, 0, {0x7b,0x00} }, -{ 3, 0x0b56, 0, {0xbb,0x0a,0x00} }, -{ 5, 0x0b59, 0, {0x40,0x03,0x02,0x0c,0x2d} }, -{ 14, 0x0b5e, 0, {0xc0,0x02,0xc0,0x03,0xc0,0x04,0xc0,0x05,0x12,0x01,0xdd,0xd0,0x05,0xd0} }, -{ 8, 0x0b6c, 0, {0x04,0xd0,0x03,0xd0,0x02,0x0b,0x80,0xe2} }, -{ 3, 0x0b74, 0, {0xba,0x2b,0x1a} }, -{ 8, 0x0b77, 0, {0x90,0x7f,0xc9,0xe0,0xfb,0xbb,0x40,0x12} }, -{ 14, 0x0b7f, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x12,0x05,0xd0,0x05,0xd0,0x04,0xd0} }, -{ 4, 0x0b8d, 0, {0x02,0x02,0x0c,0x2d} }, -{ 3, 0x0b91, 0, {0xba,0x10,0x1f} }, -{ 14, 0x0b94, 0, {0x90,0x7f,0x96,0xe0,0xfb,0x90,0x7f,0x96,0x74,0x80,0x65,0x03,0xf0,0xc0} }, -{ 14, 0x0ba2, 0, {0x02,0xc0,0x04,0xc0,0x05,0x12,0x10,0x3d,0xd0,0x05,0xd0,0x04,0xd0,0x02} }, -{ 3, 0x0bb0, 0, {0x02,0x0c,0x2d} }, -{ 3, 0x0bb3, 0, {0xba,0x11,0x12} }, -{ 14, 0x0bb6, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x10,0x6a,0xd0,0x05,0xd0,0x04,0xd0} }, -{ 4, 0x0bc4, 0, {0x02,0x02,0x0c,0x2d} }, -{ 3, 0x0bc8, 0, {0xba,0x12,0x12} }, -{ 14, 0x0bcb, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x10,0x8f,0xd0,0x05,0xd0,0x04,0xd0} }, -{ 4, 0x0bd9, 0, {0x02,0x02,0x0c,0x2d} }, -{ 3, 0x0bdd, 0, {0xba,0x13,0x0b} }, -{ 11, 0x0be0, 0, {0x90,0x7d,0xc1,0xe0,0xfb,0x90,0x88,0x00,0xf0,0x80,0x42} }, -{ 3, 0x0beb, 0, {0xba,0x14,0x11} }, -{ 14, 0x0bee, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x11,0xdd,0xd0,0x05,0xd0,0x04,0xd0} }, -{ 3, 0x0bfc, 0, {0x02,0x80,0x2e} }, -{ 3, 0x0bff, 0, {0xba,0x15,0x1d} }, -{ 12, 0x0c02, 0, {0x90,0x7d,0xc1,0xe0,0xf5,0x75,0x90,0x7d,0xc2,0xe0,0xf5,0x76} }, -{ 14, 0x0c0e, 0, {0xc0,0x02,0xc0,0x04,0xc0,0x05,0x12,0x13,0xfe,0xd0,0x05,0xd0,0x04,0xd0} }, -{ 3, 0x0c1c, 0, {0x02,0x80,0x0e} }, -{ 3, 0x0c1f, 0, {0xba,0x16,0x0b} }, -{ 11, 0x0c22, 0, {0xc0,0x04,0xc0,0x05,0x12,0x13,0xa3,0xd0,0x05,0xd0,0x04} }, -{ 11, 0x0c2d, 0, {0x90,0x7f,0xc9,0xe4,0xf0,0x75,0x31,0x00,0x02,0x09,0x2a} }, -{ 1, 0x0c38, 0, {0x22} }, -{ 7, 0x0c39, 0, {0x53,0x55,0x50,0x45,0x4e,0x44,0x00} }, -{ 7, 0x0c40, 0, {0x52,0x45,0x53,0x55,0x4d,0x45,0x00} }, -{ 6, 0x0c47, 0, {0x20,0x56,0x6f,0x6c,0x20,0x00} }, -{ 13, 0x0c4d, 0, {0x44,0x41,0x42,0x55,0x53,0x42,0x20,0x76,0x31,0x2e,0x30,0x30,0x00} }, -{ 14, 0x0c5a, 0, {0xc0,0xe0,0xc0,0xf0,0xc0,0x82,0xc0,0x83,0xc0,0x02,0xc0,0x03,0xc0,0x04} }, -{ 14, 0x0c68, 0, {0xc0,0x05,0xc0,0x06,0xc0,0x07,0xc0,0x00,0xc0,0x01,0xc0,0xd0,0x75,0xd0} }, -{ 13, 0x0c76, 0, {0x00,0xc0,0x86,0x75,0x86,0x00,0xe5,0x91,0xc2,0xe4,0xf5,0x91,0x90} }, -{ 14, 0x0c83, 0, {0x7f,0xab,0x74,0x01,0xf0,0x90,0x7f,0xe8,0xe0,0xfa,0x90,0x7f,0xe9,0xe0} }, -{ 6, 0x0c91, 0, {0xfb,0xbb,0x00,0x02,0x80,0x03} }, -{ 3, 0x0c97, 0, {0x02,0x0d,0x38} }, -{ 3, 0x0c9a, 0, {0xba,0x80,0x14} }, -{ 14, 0x0c9d, 0, {0x90,0x7f,0x00,0x74,0x01,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x90,0x7f,0xb5} }, -{ 6, 0x0cab, 0, {0x74,0x02,0xf0,0x02,0x0e,0xcd} }, -{ 5, 0x0cb1, 0, {0xba,0x82,0x02,0x80,0x03} }, -{ 3, 0x0cb6, 0, {0x02,0x0d,0x1d} }, -{ 8, 0x0cb9, 0, {0x90,0x7f,0xec,0xe0,0xfc,0xbc,0x01,0x00} }, -{ 2, 0x0cc1, 0, {0x40,0x21} }, -{ 6, 0x0cc3, 0, {0xc3,0x74,0x07,0x9c,0x40,0x1b} }, -{ 14, 0x0cc9, 0, {0xec,0x24,0xff,0x25,0xe0,0xfd,0x24,0xc6,0xf5,0x82,0xe4,0x34,0x7f,0xf5} }, -{ 13, 0x0cd7, 0, {0x83,0xe0,0xfd,0x53,0x05,0x01,0x90,0x7f,0x00,0xed,0xf0,0x80,0x2b} }, -{ 3, 0x0ce4, 0, {0xbc,0x81,0x00} }, -{ 2, 0x0ce7, 0, {0x40,0x21} }, -{ 6, 0x0ce9, 0, {0xc3,0x74,0x87,0x9c,0x40,0x1b} }, -{ 14, 0x0cef, 0, {0xec,0x24,0x7f,0x25,0xe0,0xfc,0x24,0xb6,0xf5,0x82,0xe4,0x34,0x7f,0xf5} }, -{ 13, 0x0cfd, 0, {0x83,0xe0,0xfc,0x53,0x04,0x01,0x90,0x7f,0x00,0xec,0xf0,0x80,0x05} }, -{ 5, 0x0d0a, 0, {0x90,0x7f,0x00,0xe4,0xf0} }, -{ 14, 0x0d0f, 0, {0x90,0x7f,0x01,0xe4,0xf0,0x90,0x7f,0xb5,0x74,0x02,0xf0,0x02,0x0e,0xcd} }, -{ 5, 0x0d1d, 0, {0xba,0x81,0x02,0x80,0x03} }, -{ 3, 0x0d22, 0, {0x02,0x0e,0xc5} }, -{ 14, 0x0d25, 0, {0x90,0x7f,0x00,0xe4,0xf0,0x90,0x7f,0x01,0xe4,0xf0,0x90,0x7f,0xb5,0x74} }, -{ 5, 0x0d33, 0, {0x02,0xf0,0x02,0x0e,0xcd} }, -{ 3, 0x0d38, 0, {0xbb,0x01,0x2d} }, -{ 6, 0x0d3b, 0, {0xba,0x00,0x03,0x02,0x0e,0xcd} }, -{ 3, 0x0d41, 0, {0xba,0x02,0x11} }, -{ 13, 0x0d44, 0, {0x75,0x59,0x00,0xc0,0x02,0xc0,0x03,0x12,0x0e,0xf0,0xd0,0x03,0xd0} }, -{ 4, 0x0d51, 0, {0x02,0x02,0x0e,0xcd} }, -{ 5, 0x0d55, 0, {0xba,0x21,0x02,0x80,0x03} }, -{ 3, 0x0d5a, 0, {0x02,0x0e,0xcd} }, -{ 11, 0x0d5d, 0, {0x75,0x37,0x01,0x90,0x7f,0xc5,0xe4,0xf0,0x02,0x0e,0xcd} }, -{ 3, 0x0d68, 0, {0xbb,0x03,0x1f} }, -{ 6, 0x0d6b, 0, {0xba,0x00,0x03,0x02,0x0e,0xcd} }, -{ 5, 0x0d71, 0, {0xba,0x02,0x02,0x80,0x03} }, -{ 3, 0x0d76, 0, {0x02,0x0e,0xcd} }, -{ 13, 0x0d79, 0, {0x75,0x59,0x01,0xc0,0x02,0xc0,0x03,0x12,0x0e,0xf0,0xd0,0x03,0xd0} }, -{ 4, 0x0d86, 0, {0x02,0x02,0x0e,0xcd} }, -{ 3, 0x0d8a, 0, {0xbb,0x06,0x54} }, -{ 5, 0x0d8d, 0, {0xba,0x80,0x02,0x80,0x03} }, -{ 3, 0x0d92, 0, {0x02,0x0e,0xc5} }, -{ 8, 0x0d95, 0, {0x90,0x7f,0xeb,0xe0,0xfc,0xbc,0x01,0x15} }, -{ 12, 0x0d9d, 0, {0x7c,0xfb,0x7d,0x0f,0x8d,0x06,0x7f,0x00,0x90,0x7f,0xd4,0xee} }, -{ 9, 0x0da9, 0, {0xf0,0x90,0x7f,0xd5,0xec,0xf0,0x02,0x0e,0xcd} }, -{ 10, 0x0db2, 0, {0x90,0x7f,0xeb,0xe0,0xfc,0xbc,0x02,0x02,0x80,0x03} }, -{ 3, 0x0dbc, 0, {0x02,0x0e,0xc5} }, -{ 10, 0x0dbf, 0, {0x90,0x7f,0xea,0xe0,0xfc,0xbc,0x00,0x02,0x80,0x03} }, -{ 3, 0x0dc9, 0, {0x02,0x0e,0xc5} }, -{ 12, 0x0dcc, 0, {0x7c,0x3b,0x7d,0x0f,0x8d,0x06,0x7f,0x00,0x90,0x7f,0xd4,0xee} }, -{ 9, 0x0dd8, 0, {0xf0,0x90,0x7f,0xd5,0xec,0xf0,0x02,0x0e,0xcd} }, -{ 6, 0x0de1, 0, {0xbb,0x07,0x03,0x02,0x0e,0xc5} }, -{ 3, 0x0de7, 0, {0xbb,0x08,0x10} }, -{ 13, 0x0dea, 0, {0xac,0x48,0x90,0x7f,0x00,0xec,0xf0,0x90,0x7f,0xb5,0x74,0x01,0xf0} }, -{ 3, 0x0df7, 0, {0x02,0x0e,0xcd} }, -{ 3, 0x0dfa, 0, {0xbb,0x09,0x31} }, -{ 5, 0x0dfd, 0, {0xba,0x00,0x02,0x80,0x03} }, -{ 3, 0x0e02, 0, {0x02,0x0e,0xc5} }, -{ 14, 0x0e05, 0, {0x90,0x7f,0xea,0xe0,0xfc,0xc3,0x74,0x01,0x9c,0x50,0x03,0x02,0x0e,0xc5} }, -{ 8, 0x0e13, 0, {0x90,0x7f,0xea,0xe0,0xfc,0xbc,0x00,0x0a} }, -{ 10, 0x0e1b, 0, {0x90,0x17,0x21,0xe4,0xf0,0x90,0x17,0x22,0xe4,0xf0} }, -{ 9, 0x0e25, 0, {0x90,0x7f,0xea,0xe0,0xf5,0x48,0x02,0x0e,0xcd} }, -{ 3, 0x0e2e, 0, {0xbb,0x0a,0x27} }, -{ 5, 0x0e31, 0, {0xba,0x81,0x02,0x80,0x03} }, -{ 3, 0x0e36, 0, {0x02,0x0e,0xc5} }, -{ 14, 0x0e39, 0, {0x90,0x7f,0xec,0xe0,0xfa,0x24,0x20,0xfa,0xe4,0x34,0x17,0xfc,0x8a,0x82} }, -{ 14, 0x0e47, 0, {0x8c,0x83,0xe0,0xfa,0x90,0x7f,0x00,0xf0,0x90,0x7f,0xb5,0x74,0x01,0xf0} }, -{ 3, 0x0e55, 0, {0x02,0x0e,0xcd} }, -{ 5, 0x0e58, 0, {0xbb,0x0b,0x02,0x80,0x03} }, -{ 3, 0x0e5d, 0, {0x02,0x0e,0xa9} }, -{ 13, 0x0e60, 0, {0x90,0x17,0x20,0xe4,0xf0,0x90,0x7f,0xec,0xe0,0xfa,0xba,0x01,0x1a} }, -{ 8, 0x0e6d, 0, {0x90,0x7f,0xed,0xe0,0xfa,0xba,0x00,0x12} }, -{ 14, 0x0e75, 0, {0x90,0x7f,0xea,0xe0,0xfa,0x90,0x17,0x21,0xf0,0xc0,0x03,0x12,0x04,0xe2} }, -{ 4, 0x0e83, 0, {0xd0,0x03,0x80,0x46} }, -{ 8, 0x0e87, 0, {0x90,0x7f,0xec,0xe0,0xfa,0xba,0x02,0x3e} }, -{ 8, 0x0e8f, 0, {0x90,0x7f,0xed,0xe0,0xfa,0xba,0x00,0x36} }, -{ 13, 0x0e97, 0, {0xc0,0x03,0x12,0x04,0xef,0xd0,0x03,0x90,0x7f,0xea,0xe0,0xfa,0x90} }, -{ 5, 0x0ea4, 0, {0x17,0x22,0xf0,0x80,0x24} }, -{ 5, 0x0ea9, 0, {0xbb,0x12,0x02,0x80,0x17} }, -{ 5, 0x0eae, 0, {0xbb,0x81,0x02,0x80,0x0d} }, -{ 5, 0x0eb3, 0, {0xbb,0x83,0x02,0x80,0x08} }, -{ 5, 0x0eb8, 0, {0xbb,0x82,0x02,0x80,0x03} }, -{ 3, 0x0ebd, 0, {0xbb,0x84,0x05} }, -{ 5, 0x0ec0, 0, {0x12,0x06,0x4e,0x80,0x08} }, -{ 8, 0x0ec5, 0, {0x90,0x7f,0xb4,0x74,0x03,0xf0,0x80,0x06} }, -{ 6, 0x0ecd, 0, {0x90,0x7f,0xb4,0x74,0x02,0xf0} }, -{ 2, 0x0ed3, 0, {0xd0,0x86} }, -{ 14, 0x0ed5, 0, {0xd0,0xd0,0xd0,0x01,0xd0,0x00,0xd0,0x07,0xd0,0x06,0xd0,0x05,0xd0,0x04} }, -{ 13, 0x0ee3, 0, {0xd0,0x03,0xd0,0x02,0xd0,0x83,0xd0,0x82,0xd0,0xf0,0xd0,0xe0,0x32} }, -{ 11, 0x0ef0, 0, {0x90,0x7f,0xec,0xe0,0xf5,0x5a,0xc3,0x94,0x01,0x40,0x1d} }, -{ 7, 0x0efb, 0, {0xc3,0x74,0x07,0x95,0x5a,0x40,0x16} }, -{ 13, 0x0f02, 0, {0xe5,0x5a,0x24,0xff,0x25,0xe0,0xfa,0x24,0xc6,0xf5,0x82,0xe4,0x34} }, -{ 9, 0x0f0f, 0, {0x7f,0xf5,0x83,0xaa,0x59,0xea,0xf0,0x80,0x22} }, -{ 7, 0x0f18, 0, {0xc3,0xe5,0x5a,0x94,0x81,0x40,0x1b} }, -{ 7, 0x0f1f, 0, {0xc3,0x74,0x87,0x95,0x5a,0x40,0x14} }, -{ 13, 0x0f26, 0, {0xe5,0x5a,0x24,0xff,0x25,0xe0,0xfa,0x24,0xb6,0xf5,0x82,0xe4,0x34} }, -{ 7, 0x0f33, 0, {0x7f,0xf5,0x83,0xaa,0x59,0xea,0xf0} }, -{ 1, 0x0f3a, 0, {0x22} }, -{ 14, 0x0f3b, 0, {0x09,0x02,0xba,0x00,0x03,0x01,0x00,0x40,0x00,0x09,0x04,0x00,0x00,0x00} }, -{ 14, 0x0f49, 0, {0x01,0x01,0x00,0x00,0x09,0x24,0x01,0x00,0x01,0x3d,0x00,0x01,0x01,0x0c} }, -{ 14, 0x0f57, 0, {0x24,0x02,0x01,0x10,0x07,0x00,0x02,0x03,0x00,0x00,0x00,0x0d,0x24,0x06} }, -{ 14, 0x0f65, 0, {0x03,0x01,0x02,0x15,0x00,0x03,0x00,0x03,0x00,0x00,0x09,0x24,0x03,0x02} }, -{ 14, 0x0f73, 0, {0x01,0x01,0x00,0x01,0x00,0x09,0x24,0x03,0x04,0x02,0x03,0x00,0x03,0x00} }, -{ 14, 0x0f81, 0, {0x09,0x24,0x03,0x05,0x03,0x06,0x00,0x01,0x00,0x09,0x04,0x01,0x00,0x00} }, -{ 14, 0x0f8f, 0, {0x01,0x02,0x00,0x00,0x09,0x04,0x01,0x01,0x01,0x01,0x02,0x00,0x00,0x07} }, -{ 14, 0x0f9d, 0, {0x24,0x01,0x02,0x01,0x01,0x00,0x0b,0x24,0x02,0x01,0x02,0x02,0x10,0x01} }, -{ 14, 0x0fab, 0, {0x80,0xbb,0x00,0x09,0x05,0x88,0x05,0x00,0x01,0x01,0x00,0x00,0x07,0x25} }, -{ 14, 0x0fb9, 0, {0x01,0x00,0x00,0x00,0x00,0x09,0x04,0x02,0x00,0x02,0x00,0x00,0x00,0x00} }, -{ 14, 0x0fc7, 0, {0x07,0x05,0x82,0x02,0x40,0x00,0x00,0x07,0x05,0x02,0x02,0x40,0x00,0x00} }, -{ 14, 0x0fd5, 0, {0x09,0x04,0x02,0x01,0x03,0x00,0x00,0x00,0x00,0x07,0x05,0x82,0x02,0x40} }, -{ 14, 0x0fe3, 0, {0x00,0x00,0x07,0x05,0x02,0x02,0x40,0x00,0x00,0x09,0x05,0x89,0x05,0xa0} }, -{ 10, 0x0ff1, 0, {0x01,0x01,0x00,0x00,0x00,0xff,0xff,0xff,0xff,0x00} }, -{ 14, 0x0ffb, 0, {0x12,0x01,0x00,0x01,0x00,0x00,0x00,0x40,0x47,0x05,0x99,0x99,0x00,0x01} }, -{ 14, 0x1009, 0, {0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x09,0x02,0xba} }, -{ 4, 0x1017, 0, {0x00,0x03,0x01,0x00} }, -{ 2, 0x101b, 0, {0x7a,0x00} }, -{ 3, 0x101d, 0, {0xba,0x05,0x00} }, -{ 2, 0x1020, 0, {0x50,0x17} }, -{ 8, 0x1022, 0, {0x90,0x7f,0xa5,0xe0,0xfb,0x30,0xe0,0x05} }, -{ 5, 0x102a, 0, {0x90,0x00,0x01,0x80,0x0d} }, -{ 10, 0x102f, 0, {0xc0,0x02,0x12,0x01,0xdd,0xd0,0x02,0x0a,0x80,0xe4} }, -{ 3, 0x1039, 0, {0x90,0x00,0x01} }, -{ 1, 0x103c, 0, {0x22} }, -{ 14, 0x103d, 0, {0x90,0x7d,0xc1,0xe0,0xf9,0xa3,0xe0,0xfa,0xa3,0xe0,0xfb,0x7c,0x00,0x7d} }, -{ 4, 0x104b, 0, {0x7e,0xeb,0x60,0x12} }, -{ 14, 0x104f, 0, {0x89,0x82,0x8a,0x83,0xe0,0xa3,0xa9,0x82,0xaa,0x83,0x8c,0x82,0x8d,0x83} }, -{ 4, 0x105d, 0, {0xf0,0x0c,0xdb,0xee} }, -{ 8, 0x1061, 0, {0x90,0x7d,0xc3,0xe0,0x90,0x7f,0xb9,0xf0} }, -{ 1, 0x1069, 0, {0x22} }, -{ 14, 0x106a, 0, {0x90,0x7d,0xc1,0xe0,0xf9,0xa3,0xe0,0xfa,0xa3,0xe0,0xfb,0x7c,0xc4,0x7d} }, -{ 4, 0x1078, 0, {0x7d,0xeb,0x60,0xe5} }, -{ 14, 0x107c, 0, {0x8c,0x82,0x8d,0x83,0xe0,0x0c,0x89,0x82,0x8a,0x83,0xf0,0xa3,0xa9,0x82} }, -{ 4, 0x108a, 0, {0xaa,0x83,0xdb,0xee} }, -{ 1, 0x108e, 0, {0x22} }, -{ 14, 0x108f, 0, {0x90,0x7f,0xa5,0x74,0x80,0xf0,0x05,0x86,0x90,0x7d,0xc1,0xe0,0x05,0x86} }, -{ 14, 0x109d, 0, {0xa3,0xf0,0x12,0x10,0x1b,0x90,0x7f,0xa6,0x05,0x86,0xa3,0xa3,0xe0,0xf9} }, -{ 5, 0x10ab, 0, {0x60,0x16,0xa3,0x05,0x86} }, -{ 13, 0x10b0, 0, {0x90,0x7f,0xa6,0x05,0x86,0xe0,0xa3,0x05,0x86,0xf0,0xc0,0x01,0x12} }, -{ 6, 0x10bd, 0, {0x10,0x1b,0xd0,0x01,0xd9,0xed} }, -{ 6, 0x10c3, 0, {0x90,0x7f,0xa5,0x74,0x40,0xf0} }, -{ 1, 0x10c9, 0, {0x22} }, -{ 8, 0x10ca, 0, {0x90,0x88,0x02,0x74,0x01,0xf0,0x7a,0x00} }, -{ 3, 0x10d2, 0, {0xba,0xff,0x00} }, -{ 2, 0x10d5, 0, {0x50,0x0a} }, -{ 10, 0x10d7, 0, {0xc0,0x02,0x12,0x01,0xdd,0xd0,0x02,0x0a,0x80,0xf1} }, -{ 1, 0x10e1, 0, {0x22} }, -{ 5, 0x10e2, 0, {0xe5,0x6b,0xb4,0xc0,0x08} }, -{ 8, 0x10e7, 0, {0x90,0x88,0x03,0xe5,0x6c,0xf0,0x80,0x06} }, -{ 6, 0x10ef, 0, {0x90,0x88,0x02,0xe5,0x6c,0xf0} }, -{ 4, 0x10f5, 0, {0x7a,0x00,0x7b,0x00} }, -{ 11, 0x10f9, 0, {0xc3,0xea,0x94,0x32,0xeb,0x64,0x80,0x94,0x80,0x50,0x07} }, -{ 5, 0x1104, 0, {0x0a,0xba,0x00,0x01,0x0b} }, -{ 2, 0x1109, 0, {0x80,0xee} }, -{ 1, 0x110b, 0, {0x22} }, -{ 10, 0x110c, 0, {0x90,0x88,0x03,0xe5,0x6d,0xf0,0x05,0x39,0x7a,0x00} }, -{ 3, 0x1116, 0, {0xba,0x28,0x00} }, -{ 2, 0x1119, 0, {0x50,0x03} }, -{ 3, 0x111b, 0, {0x0a,0x80,0xf8} }, -{ 5, 0x111e, 0, {0xe5,0x39,0xb4,0x10,0x08} }, -{ 8, 0x1123, 0, {0x90,0x88,0x02,0x74,0xc0,0xf0,0x80,0x0e} }, -{ 5, 0x112b, 0, {0xe5,0x39,0xb4,0x20,0x09} }, -{ 9, 0x1130, 0, {0x90,0x88,0x02,0x74,0x80,0xf0,0x75,0x39,0x00} }, -{ 2, 0x1139, 0, {0x7a,0x00} }, -{ 3, 0x113b, 0, {0xba,0x28,0x00} }, -{ 2, 0x113e, 0, {0x50,0x03} }, -{ 3, 0x1140, 0, {0x0a,0x80,0xf8} }, -{ 1, 0x1143, 0, {0x22} }, -{ 4, 0x1144, 0, {0xe5,0x6f,0x60,0x02} }, -{ 2, 0x1148, 0, {0x80,0x07} }, -{ 7, 0x114a, 0, {0x7a,0x00,0x75,0x39,0x00,0x80,0x05} }, -{ 5, 0x1151, 0, {0x7a,0x40,0x75,0x39,0x10} }, -{ 9, 0x1156, 0, {0xe5,0x6e,0x2a,0xfa,0xe5,0x6e,0x25,0x39,0xf5} }, -{ 10, 0x115f, 0, {0x39,0x90,0x88,0x02,0x74,0x80,0x2a,0xf0,0x7a,0x00} }, -{ 8, 0x1169, 0, {0xc3,0xea,0x64,0x80,0x94,0xa8,0x50,0x03} }, -{ 3, 0x1171, 0, {0x0a,0x80,0xf5} }, -{ 1, 0x1174, 0, {0x22} }, -{ 6, 0x1175, 0, {0xaa,0x70,0xab,0x71,0xac,0x72} }, -{ 12, 0x117b, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x12,0x14,0xee,0xfd,0x60,0x18} }, -{ 13, 0x1187, 0, {0x8d,0x6d,0xc0,0x02,0xc0,0x03,0xc0,0x04,0x12,0x11,0x0c,0xd0,0x04} }, -{ 9, 0x1194, 0, {0xd0,0x03,0xd0,0x02,0x0a,0xba,0x00,0x01,0x0b} }, -{ 2, 0x119d, 0, {0x80,0xdc} }, -{ 1, 0x119f, 0, {0x22} }, -{ 13, 0x11a0, 0, {0xe5,0x73,0xc4,0x54,0x0f,0xfa,0x53,0x02,0x0f,0xc3,0x74,0x09,0x9a} }, -{ 2, 0x11ad, 0, {0x50,0x06} }, -{ 6, 0x11af, 0, {0x74,0x37,0x2a,0xfb,0x80,0x04} }, -{ 4, 0x11b5, 0, {0x74,0x30,0x2a,0xfb} }, -{ 12, 0x11b9, 0, {0x8b,0x6d,0xc0,0x03,0x12,0x11,0x0c,0xd0,0x03,0xaa,0x73,0x53} }, -{ 8, 0x11c5, 0, {0x02,0x0f,0xc3,0x74,0x09,0x9a,0x50,0x06} }, -{ 6, 0x11cd, 0, {0x74,0x37,0x2a,0xfb,0x80,0x04} }, -{ 4, 0x11d3, 0, {0x74,0x30,0x2a,0xfb} }, -{ 5, 0x11d7, 0, {0x8b,0x6d,0x12,0x11,0x0c} }, -{ 1, 0x11dc, 0, {0x22} }, -{ 7, 0x11dd, 0, {0x90,0x7d,0xc3,0xe0,0xfa,0x60,0x0f} }, -{ 12, 0x11e4, 0, {0x90,0x7d,0xc1,0xe0,0xf5,0x6e,0x90,0x7d,0xc2,0xe0,0xf5,0x6f} }, -{ 3, 0x11f0, 0, {0x12,0x11,0x44} }, -{ 12, 0x11f3, 0, {0x90,0x7d,0xff,0xe4,0xf0,0x75,0x70,0xc4,0x75,0x71,0x7d,0x75} }, -{ 5, 0x11ff, 0, {0x72,0x01,0x12,0x11,0x75} }, -{ 1, 0x1204, 0, {0x22} }, -{ 2, 0x1205, 0, {0x7a,0x04} }, -{ 3, 0x1207, 0, {0xba,0x40,0x00} }, -{ 2, 0x120a, 0, {0x50,0x36} }, -{ 14, 0x120c, 0, {0xea,0x24,0xc0,0xf5,0x82,0xe4,0x34,0x7d,0xf5,0x83,0xe0,0xfb,0x7c,0x00} }, -{ 3, 0x121a, 0, {0xbc,0x08,0x00} }, -{ 2, 0x121d, 0, {0x50,0x20} }, -{ 6, 0x121f, 0, {0x8b,0x05,0xed,0x30,0xe7,0x0b} }, -{ 11, 0x1225, 0, {0x90,0x7f,0x96,0x74,0x42,0xf0,0x74,0xc3,0xf0,0x80,0x08} }, -{ 8, 0x1230, 0, {0x90,0x7f,0x96,0xe4,0xf0,0x74,0x81,0xf0} }, -{ 7, 0x1238, 0, {0xeb,0x25,0xe0,0xfb,0x0c,0x80,0xdb} }, -{ 3, 0x123f, 0, {0x0a,0x80,0xc5} }, -{ 1, 0x1242, 0, {0x22} }, -{ 4, 0x1243, 0, {0x7a,0x00,0x7b,0xef} }, -{ 3, 0x1247, 0, {0xba,0x10,0x00} }, -{ 2, 0x124a, 0, {0x50,0x20} }, -{ 14, 0x124c, 0, {0x74,0x11,0x2b,0xfb,0x24,0x00,0xfc,0xe4,0x34,0x18,0xfd,0x8c,0x82,0x8d} }, -{ 14, 0x125a, 0, {0x83,0xe4,0xf0,0xea,0x24,0x00,0xf5,0x82,0xe4,0x34,0x19,0xf5,0x83,0xe4} }, -{ 4, 0x1268, 0, {0xf0,0x0a,0x80,0xdb} }, -{ 1, 0x126c, 0, {0x22} }, -{ 14, 0x126d, 0, {0x74,0xf8,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, -{ 14, 0x127b, 0, {0x74,0xf9,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, -{ 14, 0x1289, 0, {0x74,0xfa,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, -{ 14, 0x1297, 0, {0x74,0xfb,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, -{ 14, 0x12a5, 0, {0x74,0xff,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0xe4,0xf0} }, -{ 1, 0x12b3, 0, {0x22} }, -{ 14, 0x12b4, 0, {0x12,0x03,0xcb,0x12,0x12,0x6d,0x7a,0xc0,0x7b,0x87,0x7c,0x01,0x74,0x01} }, -{ 14, 0x12c2, 0, {0x2a,0xfd,0xe4,0x3b,0xfe,0x8c,0x07,0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x74} }, -{ 14, 0x12d0, 0, {0x01,0x12,0x14,0xbf,0x2d,0xfa,0xe4,0x3e,0xfb,0x8f,0x04,0x8d,0x82,0x8e} }, -{ 14, 0x12de, 0, {0x83,0x8f,0xf0,0x74,0x06,0x12,0x14,0xbf,0x74,0x01,0x2a,0xfd,0xe4,0x3b} }, -{ 14, 0x12ec, 0, {0xfe,0x8c,0x07,0x8a,0x82,0x8b,0x83,0x8c,0xf0,0xe4,0x12,0x14,0xbf,0x74} }, -{ 14, 0x12fa, 0, {0x01,0x2d,0xfa,0xe4,0x3e,0xfb,0x8f,0x04,0x8d,0x82,0x8e,0x83,0x8f,0xf0} }, -{ 14, 0x1308, 0, {0x74,0x0b,0x12,0x14,0xbf,0x74,0x01,0x2a,0xfd,0xe4,0x3b,0xfe,0x8c,0x07} }, -{ 14, 0x1316, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x74,0x08,0x12,0x14,0xbf,0x74,0x01,0x2d} }, -{ 14, 0x1324, 0, {0xfa,0xe4,0x3e,0xfb,0x8f,0x04,0x8d,0x82,0x8e,0x83,0x8f,0xf0,0x74,0x01} }, -{ 14, 0x1332, 0, {0x12,0x14,0xbf,0x2a,0xfd,0xe4,0x3b,0xfe,0x8c,0x07,0x8a,0x82,0x8b,0x83} }, -{ 14, 0x1340, 0, {0x8c,0xf0,0xe4,0x12,0x14,0xbf,0x74,0x01,0x2d,0xfa,0xe4,0x3e,0xfb,0x8f} }, -{ 14, 0x134e, 0, {0x04,0x8d,0x82,0x8e,0x83,0x8f,0xf0,0x74,0x03,0x12,0x14,0xbf,0x7d,0x00} }, -{ 3, 0x135c, 0, {0xbd,0x06,0x00} }, -{ 2, 0x135f, 0, {0x50,0x12} }, -{ 11, 0x1361, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0x0a,0xba,0x00,0x01,0x0b} }, -{ 7, 0x136c, 0, {0xe4,0x12,0x14,0xbf,0x0d,0x80,0xe9} }, -{ 13, 0x1373, 0, {0x8a,0x82,0x8b,0x83,0x8c,0xf0,0xe5,0x74,0x12,0x14,0xbf,0x74,0xf9} }, -{ 14, 0x1380, 0, {0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0x74,0x0f,0xf0,0x74} }, -{ 14, 0x138e, 0, {0xfe,0x24,0x00,0xf5,0x82,0x74,0x03,0x34,0x84,0xf5,0x83,0x74,0x01,0xf0} }, -{ 6, 0x139c, 0, {0x12,0x03,0xe1,0x12,0x04,0xf7} }, -{ 1, 0x13a2, 0, {0x22} }, -{ 13, 0x13a3, 0, {0x90,0x7d,0xc1,0xe0,0xfa,0x24,0x00,0xfb,0xe4,0x34,0x19,0xfc,0x90} }, -{ 14, 0x13b0, 0, {0x7d,0xc2,0xe0,0xfd,0x8b,0x82,0x8c,0x83,0xf0,0x75,0xf0,0x11,0xea,0xa4} }, -{ 3, 0x13be, 0, {0xfa,0x7b,0x00} }, -{ 3, 0x13c1, 0, {0xbb,0x10,0x00} }, -{ 2, 0x13c4, 0, {0x50,0x24} }, -{ 14, 0x13c6, 0, {0xea,0x24,0x00,0xfc,0xe4,0x34,0x18,0xfd,0xeb,0x2c,0xfc,0xe4,0x3d,0xfd} }, -{ 14, 0x13d4, 0, {0x74,0x04,0x2b,0x24,0xc0,0xf5,0x82,0xe4,0x34,0x7d,0xf5,0x83,0xe0,0xfe} }, -{ 8, 0x13e2, 0, {0x8c,0x82,0x8d,0x83,0xf0,0x0b,0x80,0xd7} }, -{ 14, 0x13ea, 0, {0xea,0x24,0x00,0xfa,0xe4,0x34,0x18,0xfb,0x74,0x10,0x2a,0xf5,0x82,0xe4} }, -{ 5, 0x13f8, 0, {0x3b,0xf5,0x83,0xe4,0xf0} }, -{ 1, 0x13fd, 0, {0x22} }, -{ 4, 0x13fe, 0, {0xe5,0x76,0x60,0x02} }, -{ 2, 0x1402, 0, {0x80,0x16} }, -{ 12, 0x1404, 0, {0x74,0x0f,0x55,0x75,0xfa,0x8a,0x75,0x24,0x00,0xf5,0x82,0xe4} }, -{ 10, 0x1410, 0, {0x34,0x19,0xf5,0x83,0xe0,0xf5,0x74,0x12,0x12,0xb4} }, -{ 10, 0x141a, 0, {0x12,0x10,0xca,0x75,0x6e,0x00,0x75,0x6f,0x00,0x12} }, -{ 6, 0x1424, 0, {0x11,0x44,0x75,0x70,0xb9,0x75} }, -{ 6, 0x142a, 0, {0x71,0x14,0x75,0x72,0x02,0x12} }, -{ 11, 0x1430, 0, {0x11,0x75,0xe5,0x76,0xb4,0x02,0x04,0x74,0x01,0x80,0x01} }, -{ 1, 0x143b, 0, {0xe4} }, -{ 3, 0x143c, 0, {0xfa,0x70,0x0f} }, -{ 12, 0x143f, 0, {0x74,0x01,0x25,0x75,0xf5,0x73,0xc0,0x02,0x12,0x11,0xa0,0xd0} }, -{ 3, 0x144b, 0, {0x02,0x80,0x0a} }, -{ 10, 0x144e, 0, {0x85,0x75,0x73,0xc0,0x02,0x12,0x11,0xa0,0xd0,0x02} }, -{ 12, 0x1458, 0, {0x75,0x6e,0x00,0x75,0x6f,0x01,0xc0,0x02,0x12,0x11,0x44,0xd0} }, -{ 4, 0x1464, 0, {0x02,0xea,0x70,0x1a} }, -{ 13, 0x1468, 0, {0x75,0xf0,0x11,0xe5,0x75,0xa4,0xfa,0x24,0x00,0xfa,0xe4,0x34,0x18} }, -{ 9, 0x1475, 0, {0xfb,0x8a,0x70,0x8b,0x71,0x75,0x72,0x01,0x12} }, -{ 4, 0x147e, 0, {0x11,0x75,0x80,0x36} }, -{ 2, 0x1482, 0, {0x7a,0x00} }, -{ 3, 0x1484, 0, {0xba,0x10,0x00} }, -{ 2, 0x1487, 0, {0x50,0x2f} }, -{ 13, 0x1489, 0, {0xea,0x24,0x00,0xf5,0x82,0xe4,0x34,0x19,0xf5,0x83,0xe0,0xfb,0xe5} }, -{ 4, 0x1496, 0, {0x75,0xb5,0x03,0x1b} }, -{ 14, 0x149a, 0, {0x75,0xf0,0x11,0xea,0xa4,0xfb,0x24,0x00,0xfb,0xe4,0x34,0x18,0xfc,0x8b} }, -{ 9, 0x14a8, 0, {0x70,0x8c,0x71,0x75,0x72,0x01,0xc0,0x02,0x12} }, -{ 4, 0x14b1, 0, {0x11,0x75,0xd0,0x02} }, -{ 3, 0x14b5, 0, {0x0a,0x80,0xcc} }, -{ 1, 0x14b8, 0, {0x22} }, -{ 6, 0x14b9, 0, {0x50,0x72,0x6f,0x67,0x20,0x00} }, -{ 14, 0x14bf, 0, {0xc8,0xc0,0xe0,0xc8,0xc0,0xe0,0xe5,0xf0,0x60,0x0b,0x14,0x60,0x0f,0x14} }, -{ 7, 0x14cd, 0, {0x60,0x11,0x14,0x60,0x12,0x80,0x15} }, -{ 7, 0x14d4, 0, {0xd0,0xe0,0xa8,0x82,0xf6,0x80,0x0e} }, -{ 5, 0x14db, 0, {0xd0,0xe0,0xf0,0x80,0x09} }, -{ 4, 0x14e0, 0, {0xd0,0xe0,0x80,0x05} }, -{ 5, 0x14e4, 0, {0xd0,0xe0,0xa8,0x82,0xf2} }, -{ 4, 0x14e9, 0, {0xc8,0xd0,0xe0,0xc8} }, -{ 1, 0x14ed, 0, {0x22} }, -{ 14, 0x14ee, 0, {0xc8,0xc0,0xe0,0xe5,0xf0,0x60,0x0d,0x14,0x60,0x0f,0x14,0x60,0x0f,0x14} }, -{ 6, 0x14fc, 0, {0x60,0x10,0x74,0xff,0x80,0x0f} }, -{ 5, 0x1502, 0, {0xa8,0x82,0xe6,0x80,0x0a} }, -{ 3, 0x1507, 0, {0xe0,0x80,0x07} }, -{ 4, 0x150a, 0, {0xe4,0x93,0x80,0x03} }, -{ 3, 0x150e, 0, {0xa8,0x82,0xe2} }, -{ 4, 0x1511, 0, {0xf8,0xd0,0xe0,0xc8} }, -{ 1, 0x1515, 0, {0x22} }, -{ 0, 0x0000, 1, {0} } - -}; - -static unsigned char bitstream[] = { - -0x00,0x09,0x0F,0xF0,0x0F,0xF0,0x0F,0xF0, 0x0F,0xF0,0x00,0x00,0x01,0x61,0x00,0x0D, -0x64,0x61,0x62,0x75,0x73,0x62,0x74,0x72, 0x2E,0x6E,0x63,0x64,0x00,0x62,0x00,0x0B, -0x73,0x31,0x30,0x78,0x6C,0x76,0x71,0x31, 0x30,0x30,0x00,0x63,0x00,0x0B,0x31,0x39, -0x39,0x39,0x2F,0x30,0x39,0x2F,0x32,0x34, 0x00,0x64,0x00,0x09,0x31,0x30,0x3A,0x34, -0x32,0x3A,0x34,0x36,0x00,0x65,0x00,0x00, 0x2E,0xC0,0xFF,0x20,0x17,0x5F,0x9F,0x5B, -0xFE,0xFB,0xBB,0xB7,0xBB,0xBB,0xFB,0xBF, 0xAF,0xEF,0xFB,0xDF,0xB7,0xFB,0xFB,0x7F, -0xBF,0xB7,0xEF,0xF2,0xFF,0xFB,0xFE,0xFF, 0xFF,0xEF,0xFF,0xFE,0xFF,0xBF,0xFF,0xFF, -0xFF,0xFF,0xAF,0xFF,0xFA,0xFF,0xFF,0xFF, 0xC9,0xFF,0xFF,0xFF,0xDF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFB,0xFF,0xA3,0xFF,0xFB, -0xFE,0xFF,0xBF,0xEF,0xE3,0xFE,0xFF,0xBF, 0xE3,0xFE,0xFF,0xBF,0x6F,0xFB,0xF6,0xFF, -0xBF,0xFF,0x47,0xFF,0xFF,0x9F,0xEE,0xF9, 0xFE,0xCF,0x9F,0xEF,0xFB,0xCF,0x9B,0xEE, -0xF8,0xFE,0xEF,0x8F,0xEE,0xFB,0xFE,0x0B, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xBF,0xFF,0xFF,0xFB,0xFF,0xFF, 0xBF,0xFF,0xFF,0xFC,0x17,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0x7F, 0xFF,0xFF,0xFB,0xFF,0xFF,0x7F,0xFF,0xFF, -0xFC,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFB,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0x5F,0xFF, 0xFF,0xFD,0xFF,0xFF,0xDB,0xFF,0xFD,0xFF, -0x77,0xFF,0xFD,0xFF,0xFF,0xDF,0xFE,0xFD, 0xFF,0xFF,0xF2,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFD,0xFF,0xFF,0xFF,0xFD,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1, -0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xE3,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xBF, -0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0x67,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0x7F,0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF, 0xFF,0xFF,0xDF,0xFF,0xFF,0xFF,0x2F,0xFF, -0xF3,0xFD,0xFF,0x7F,0xDE,0xF7,0xFD,0xFF, 0x7F,0xF7,0x7D,0xFF,0x7F,0xDF,0xF7,0xBD, -0xFF,0x7F,0xFF,0x1F,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xEF,0xFB, -0xFE,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFF, 0x3F,0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F, -0x9F,0xE7,0xFA,0x7F,0x9F,0xE7,0xF9,0xFE, 0x7F,0x9F,0xE7,0xFF,0xFC,0x7F,0xBF,0xBF, -0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0xB7, 0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, -0xFF,0xE0,0xFD,0xF9,0xFE,0x7F,0x9F,0xE7, 0xF9,0xFE,0x7F,0x9D,0xF9,0xFE,0x7D,0x9D, -0xE7,0xF9,0xFE,0x7F,0x9F,0xED,0xED,0xFF, 0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0x7F, -0xDF,0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF, 0x7F,0xDF,0xFF,0x9B,0xFF,0xEF,0xFB,0xFE, -0xFB,0xBF,0xEF,0xBB,0xFE,0xFF,0xAF,0xBB, 0xBE,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFF, -0xB7,0xBF,0xDB,0xF6,0xBD,0xBF,0x6B,0xDB, 0xF6,0xF9,0xBF,0x5B,0xD6,0xF9,0xBF,0x6F, -0xDB,0xF6,0xFD,0xBF,0xFF,0x0E,0xFF,0xFF, 0xFF,0xFF,0x5F,0xFF,0xF7,0xFF,0xFF,0x7F, -0xF7,0xBD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xDF,0x9F,0xFF,0xFF,0xFF,0xFE,0xFF, -0xFF,0xEF,0xFE,0xFE,0xFF,0xFF,0x77,0xFF, 0xFB,0xFB,0xFF,0xFF,0xFF,0xFF,0xF8,0x3F, -0xFF,0xFD,0xFF,0xFF,0xFF,0xFD,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xF4,0x7F,0xFF,0xFE,0xFD, 0xBE,0xFF,0xDF,0xFE,0xFF,0xFF,0xEF,0x7F, -0xFF,0xCF,0xFF,0xCF,0xFF,0xFF,0xFF,0xDF, 0xE6,0xFF,0xFF,0x7F,0xDF,0xF7,0xDD,0x7F, -0x7F,0xDF,0xF7,0xFF,0x7F,0xDF,0xD7,0xFD, 0xFF,0x7F,0xDF,0xF7,0xFF,0xCD,0xFF,0xF2, -0xFF,0xFF,0x4F,0x7F,0xF4,0xFF,0xFF,0xFF, 0xE7,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xBB,0xFF,0xEF,0xFF,0xFE,0xFF, 0xFF,0xFF,0xEF,0xFF,0xFF,0xEF,0xFF,0xFB, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x65, 0xEF,0xFF,0xFF,0x7F,0xFF,0xFD,0xEF,0xFF, -0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFE,0xCF,0xDF,0xFE,0xFF, -0xFF,0xFB,0xFF,0xFF,0xFF,0xFF,0xF3,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFE,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xBF,0xFF, 0xFF,0xFF,0xE3,0x7F,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xEF,0xEB,0xFF,0xFE,0xBF,0xFF, 0xEB,0xFF,0xFC,0x7F,0xFF,0xFF,0xFF,0xEE, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xDD,0xFF, 0xD6,0xFF,0xFD,0xBF,0xFF,0xFB,0xFF,0xFE, -0xFD,0xFF,0xFF,0xFD,0xEF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xDE,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xBF,0xFF,0xFD,0xFF,0x7F,0xBF, 0xFF,0x5F,0xDF,0xFF,0xFF,0xBF,0x77,0xFF, -0xFF,0xFF,0x7F,0xD7,0xFF,0xFF,0xFF,0xFF, 0xFF,0xC3,0xFF,0xFF,0xFF,0xFF,0xDF,0xEF, -0xFF,0xFF,0xFE,0xFB,0xFF,0xFF,0xDF,0xBF, 0xFF,0xFF,0xFF,0xFF,0xED,0xFF,0xB7,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xAF,0x7F,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xDF,0xBF,0xDF,0xF3,0xFD,0xFB,0xFF,0x5B, -0xFD,0xFF,0xBF,0xEF,0xF7,0xFF,0xFF,0x7D, 0xFF,0xFF,0xFF,0xFF,0xF8,0x3B,0xFF,0xBF, -0x6F,0xFF,0xFE,0xFF,0xBF,0xFF,0xEB,0x7D, 0xFF,0xEF,0xFB,0xFE,0xFF,0xFF,0xFF,0xFF, -0xFF,0xF2,0x7F,0xFC,0xFF,0x3F,0xDF,0xED, 0xFE,0xFF,0xFF,0xFF,0xFF,0xEF,0x5F,0xF7, -0xB5,0xFF,0xEF,0xFF,0xFF,0xFF,0xE0,0x3F, 0x9F,0x9E,0xFF,0xFF,0xEF,0xFF,0xDF,0xFF, -0xBF,0x5F,0xBF,0xCF,0xF3,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0x69,0xAF,0x33,0xFD,0xFF, -0xFB,0xFF,0xFF,0xFF,0xFF,0xFC,0xFF,0x7F, 0xD9,0xFF,0xDF,0xFF,0xFF,0xFF,0xFF,0xF5, -0xA3,0xDF,0x6E,0xDE,0xFF,0xFF,0xBD,0xFF, 0xFF,0xFE,0xFF,0xFF,0xFF,0xFE,0xE7,0xFD, -0xFF,0xFF,0xFF,0xF9,0xEF,0xC6,0xFE,0xB7, 0xAD,0xE5,0xF9,0xFF,0xFF,0xFF,0xCF,0xFF, -0xFF,0xFF,0xCD,0xFB,0x7F,0xFF,0xFF,0xFF, 0xF9,0xF6,0x0F,0xDF,0xEC,0xCF,0x7F,0xFF, -0xFB,0x7F,0xFF,0xFF,0xFF,0xFD,0xFF,0xFE, 0xF9,0xFD,0x7F,0xFF,0x7F,0xFF,0xF9,0x5B, -0xFF,0x73,0xDC,0xFD,0x7B,0xDF,0xFF,0xFF, 0xFF,0x7B,0xFF,0xFF,0xF7,0x53,0xD6,0xFF, -0xFF,0xFF,0xFF,0xD8,0x9F,0xFE,0xFF,0xEF, 0x7F,0xEE,0xFF,0xFF,0xFF,0xFB,0xED,0xED, -0xFD,0xFF,0xFE,0xFF,0xFF,0xFB,0x7F,0xFF, 0xE2,0x7F,0xFF,0x6F,0xD8,0x57,0xF7,0xFF, -0xFF,0xFF,0xDF,0xFF,0xE8,0xFF,0xFF,0xFD, 0xFF,0xFF,0xFC,0x7F,0xFF,0xE4,0xFF,0xFB, -0xEF,0xFB,0xFE,0xDF,0xB7,0xED,0xFF,0xFE, 0xDF,0x7F,0xFF,0xFE,0x7F,0xB7,0xFF,0xFF, -0xFF,0xFF,0x89,0xFF,0xFF,0xCF,0xF3,0xFE, 0x7F,0xFF,0xEF,0xFF,0xFE,0x7E,0x7F,0xFB, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF1, 0xFF,0xEB,0x7A,0xD5,0xBF,0x6F,0xDB,0xBE, -0xFD,0xB7,0xD8,0xF6,0xE5,0xBF,0x6F,0xFB, 0xFE,0xF5,0xBD,0x7E,0x06,0xFF,0xDF,0xF7, -0xFB,0xF6,0xFF,0x3F,0xFF,0xDB,0xFF,0xFF, 0x6F,0xFB,0xF7,0xFF,0xFF,0xFF,0xFB,0xFE, -0xF7,0xAF,0xFF,0xB7,0xED,0xEF,0xF7,0xFE, 0xFF,0xFF,0xDF,0xFF,0xFE,0xFF,0xEF,0xFF, -0xFF,0xFF,0xFF,0xBF,0xF7,0xFC,0x1F,0xEE, 0xFB,0xFE,0xBD,0xFF,0x7F,0x5F,0xD7,0xFD, -0xFB,0x43,0xFF,0xFF,0xFD,0xFF,0x5F,0xFF, 0xF7,0xFF,0xF9,0x3F,0xFF,0xCF,0xF3,0xFD, -0xF7,0x7E,0xEF,0xA7,0xF9,0xFE,0x8F,0xA7, 0xE9,0xF3,0x7E,0x9F,0xFB,0xF8,0xFF,0xFF, -0x3F,0xFD,0x7F,0x5F,0xDF,0xFD,0xFF,0xFF, 0x5F,0xFF,0xFD,0x5F,0xFF,0xFF,0x7F,0xFD, -0x7F,0xFD,0x9F,0xFF,0xE0,0xFF,0xFA,0xF8, 0xBE,0x6F,0x9F,0xE6,0xF8,0xBE,0x3F,0x9A, -0xF9,0xBE,0x6F,0x9F,0xE2,0xF9,0xFE,0x6F, 0x9F,0xF9,0xFF,0xF5,0xFD,0x7F,0xCF,0xDF, -0xFD,0xFD,0x7F,0xFF,0xF5,0xFF,0xFF,0xFF, 0xF7,0xF5,0xFD,0x0F,0xDB,0xFF,0xD3,0xFF, -0xEB,0xFA,0xFF,0xFF,0xBF,0xFF,0xFA,0xFF, 0xFF,0xCB,0xFB,0xFE,0xFF,0xFF,0xEB,0xFA, -0xFE,0xFF,0xFF,0xB7,0xFF,0xFF,0xFF,0xFF, 0xBF,0xFF,0xDF,0xF5,0xFF,0xFF,0xD7,0xFF, -0xFF,0xFF,0xDF,0xD7,0xF5,0xFF,0x7F,0xFE, 0x4F,0xFF,0xFD,0xFF,0x7F,0x7F,0xFF,0xAD, -0xEB,0xFB,0xFF,0xAD,0xFF,0xFF,0xFF,0xFF, 0xAF,0xEB,0xFB,0xFF,0xFC,0x0D,0xFF,0xFF, -0xDF,0xD2,0xFD,0xFF,0xFF,0xFD,0xF6,0xFF, 0xFF,0x7F,0xFF,0xFF,0x1F,0xFF,0xFF,0xFF, -0xFF,0xFB,0x3F,0x7D,0xEB,0x32,0xFE,0xBF, 0x2F,0xEB,0xFA,0xAE,0xBD,0xE0,0xFA,0x7E, -0xBF,0xAD,0xEB,0xFA,0xFE,0xBF,0xF5,0x7F, 0xFF,0xDE,0xFE,0xE3,0xFB,0xFF,0xFF,0xFF, -0xDF,0xEF,0x4F,0xDF,0xFF,0x7F,0xDF,0xFF, 0xF7,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xEF, -0xFB,0xFF,0xFF,0xFF,0xEF,0xFF,0xFF,0xDF, 0xED,0xFB,0xDF,0xFF,0xBF,0xFF,0xFF,0xFF, -0x81,0xFF,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF, 0xFF,0xFF,0xFE,0xDD,0xFE,0xEF,0xFD,0xFF, -0xFF,0xFB,0xFE,0xF7,0xFF,0x93,0xFD,0xFB, 0x7E,0xFF,0xFE,0x87,0xE9,0xFF,0x7F,0xB3, -0x9F,0xFE,0xFE,0xFF,0xAF,0xFD,0xFE,0x7E, 0x3F,0xFE,0x67,0xFF,0xFF,0xF7,0xFF,0xFF, -0xFC,0xF7,0xDF,0xFD,0xFF,0x7F,0xFF,0xFF, 0x7F,0x6D,0xFF,0xFF,0xFE,0xFF,0xFF,0x2F, -0xFF,0xBF,0xFF,0xFF,0xEE,0xFF,0xBE,0xFF, 0xFF,0xFE,0xFF,0xEF,0xFF,0xFF,0xFE,0xFF, -0xEF,0xFF,0xFF,0xFA,0x5F,0xFF,0xFF,0xFB, 0xFF,0xFF,0xEF,0xFF,0xFB,0xFE,0xFD,0xFF, -0xFE,0xFF,0xFB,0xFF,0xFF,0xFF,0x7F,0xFF, 0xFE,0xBF,0xDF,0xFF,0xFB,0xFF,0xFF,0xF7, -0xFC,0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F, 0xFF,0xFF,0xFF,0xFF,0xFF,0xF2,0x7F,0xFF, -0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF, 0xF3,0xFF,0xFF,0xFF,0xEF,0xFB,0xFF,0xFF, -0xFF,0xDF,0xE2,0xFF,0xFF,0xFB,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFB,0xE7,0xFF,0xFD, -0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,0xED, 0xEF,0xFD,0xFF,0xFF,0xDF,0xD7,0xF5,0xFD, -0x7F,0x5D,0xFD,0xFF,0x7F,0xDF,0x97,0xF4, 0xFD,0x7B,0x5F,0xFF,0xC9,0xFF,0xFB,0xFE, -0xFF,0xBF,0xFF,0x5F,0xFF,0xFF,0xF7,0xFF, 0xEF,0xFD,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xF7,0xFF,0xD7,0xFD,0x7D,0x7F,0xFF, 0xFF,0xFF,0xFF,0xEF,0xDF,0xF7,0xFD,0xFF, -0xBB,0xFF,0xFF,0x7F,0xFF,0xFE,0xE3,0xFF, 0xF9,0xFE,0x7F,0xBF,0xEF,0xFB,0xFE,0xFF, -0xBF,0xF9,0xFE,0xFF,0x9F,0xEF,0xF9,0xFE, 0xFF,0xBF,0xF3,0xDA,0xFF,0x37,0xCD,0xF3, -0x7C,0xDF,0x37,0xCD,0xF3,0x7F,0x37,0xCD, 0xF3,0x7C,0xDF,0x37,0xCC,0xF3,0x7F,0x5A, -0xBD,0xF6,0xFD,0xBF,0x6F,0xDB,0xF6,0xFD, 0xBF,0x6F,0xDE,0xFD,0xBF,0x6F,0xDB,0xF6, -0xFD,0xBF,0x6F,0xFE,0xF1,0x6F,0xEB,0x7A, 0xDE,0xB7,0xAD,0xEB,0x7A,0xDE,0xB7,0xAF, -0x7A,0xDE,0xB7,0xAD,0xEB,0x7A,0xDE,0xB7, 0xFF,0x7E,0xFF,0xFE,0xCD,0xB3,0x6C,0xDB, -0x36,0xCD,0xB3,0x6C,0xDE,0xCD,0xB3,0x6C, 0xDB,0x36,0xCD,0xB3,0x6C,0xDF,0xC9,0xBF, -0xF7,0xBD,0xEF,0x7A,0x9E,0xA7,0xA9,0xEA, 0x7A,0xB7,0xBD,0xEA,0x7B,0xDE,0xA7,0xBD, -0xCA,0x72,0x8D,0x91,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xEF,0xFB,0xFE,0xF7,0xEF,0xFB, -0xFE,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFE, 0x87,0xFF,0xF6,0xFD,0xBF,0x6F,0xDB,0xF6, -0xFD,0xBF,0x6F,0xF6,0xFD,0xBF,0x6F,0xDB, 0xF6,0xFD,0xBF,0x6F,0xFE,0x4F,0xFF,0xBF, -0xEF,0xBB,0xEE,0xFB,0xBE,0xEF,0xBB,0xEF, 0xBE,0xEF,0xBB,0xEE,0xFB,0xBE,0xEF,0xBB, -0xEF,0xFC,0x5F,0xFF,0xFF,0xFF,0x3F,0xCF, 0xF3,0xFC,0xFF,0x3F,0xCF,0xFC,0xFF,0x3F, -0xCF,0xF3,0xFC,0xFF,0x3F,0xCF,0xFD,0x9F, 0xFE,0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF, -0xEB,0xFE,0xBF,0xAF,0xEB,0xFA,0xFE,0xBF, 0xAF,0xEB,0xFF,0xE1,0x6F,0xFD,0xFF,0x7F, -0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFD,0xFF, 0x7F,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFF, -0x7A,0xBF,0xFB,0xFE,0xDF,0xB7,0xED,0xFB, 0x7E,0xDF,0xB7,0xFB,0x7E,0xDF,0xB7,0xED, -0xFB,0x7E,0xDF,0xB7,0xFF,0xC9,0xFF,0xFF, 0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, -0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEE, 0xFB,0xFE,0xBB,0xFF,0xFE,0xFF,0xBF,0xEF, -0xFB,0xFE,0xFF,0xBF,0xEF,0xFE,0xFF,0xBF, 0xEF,0xFB,0xFE,0xFF,0x3F,0xCF,0xFF,0xE7, -0xFE,0xFF,0xF5,0xFD,0x77,0x5D,0xD7,0x35, 0xDD,0x77,0xD7,0xF5,0xCD,0x7B,0x5D,0xD7, -0xF5,0xDD,0x77,0xFE,0x27,0xFF,0xFF,0x8B, 0xE2,0xF8,0xBE,0x2F,0x8B,0xE2,0xF9,0xAF, -0x8B,0xE2,0xF8,0xBE,0x2F,0x8B,0xE2,0xF9, 0xFE,0x1F,0xFF,0x5F,0xD7,0xF5,0xFD,0x7F, -0x5F,0xD7,0xF5,0xFF,0x5F,0xD7,0xF5,0xFD, 0x7F,0x5F,0xD7,0xF5,0xFF,0xFA,0x3F,0xFE, -0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF,0xEB, 0xEC,0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF, -0xEB,0xFF,0xFE,0x7F,0xFD,0x7F,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE6, 0xFF,0xFA,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF, -0xF7,0xFC,0xFF,0xDF,0xF7,0xFD,0xFF,0x7F, 0xDF,0xF7,0xFD,0xFF,0xF5,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0x02,0xFF,0xFE,0xBF,0xAB,0xEB,0xFA, 0xBE,0xBF,0x23,0xEB,0xDE,0x1F,0xAF,0xEA, -0xFA,0xFE,0xAF,0xAF,0xEB,0xFD,0x97,0xFF, 0xF3,0xFC,0x7B,0x1F,0xCF,0xF1,0xFC,0x7F, -0x1F,0xF1,0xFC,0x77,0x1F,0xCD,0xF1,0xFC, 0xFF,0x1F,0xFE,0x87,0xFF,0xAF,0xEF,0xFA, -0xFE,0xFF,0xAF,0xEF,0xFA,0xFD,0xBF,0x2B, 0xFB,0x7E,0xBF,0xBF,0xEB,0xFB,0xFB,0xFB, -0xDF,0xFF,0xFB,0xF7,0xFF,0xFF,0x7F,0xF7, 0xF7,0xFF,0xFD,0xDF,0xFE,0xFC,0xDF,0xFF, -0xDF,0xFF,0xFD,0xFF,0xDA,0xBF,0xFF,0xBB, 0xEF,0xFB,0xF9,0xFF,0xBE,0xEF,0xFB,0xFB, -0xBF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFF,0xF7,0x7F,0xFD,0xD7,0xFF,0xFF,0x7F, -0xFF,0xFF,0xFF,0xFE,0xF7,0xFF,0xFE,0xFF, 0xF7,0xFF,0xFF,0x7F,0xFF,0xFF,0xEC,0xFF, -0xFF,0xFE,0xDF,0xBF,0xFF,0xFB,0xFE,0xFF, 0xBB,0x68,0xAE,0x1F,0xAE,0xFB,0xFB,0xFF, -0xFF,0xBF,0xFF,0xD5,0xFF,0x7F,0xFF,0xFF, 0xF7,0xFE,0xFE,0xFF,0xBF,0xEF,0x9F,0xFD, -0x7F,0xFF,0xCB,0xFF,0xFF,0xDF,0xFF,0xFF, 0xBB,0xF7,0xBF,0xFF,0xFF,0xFF,0xFF,0xDF, -0xFF,0xBF,0xFB,0xFF,0xFF,0xFF,0xDE,0x3F, 0xFF,0xFF,0xFF,0xFF,0xFF,0xA7,0xFF,0xFF, -0xFF,0xFF,0xEF,0xFF,0x7F,0xFB,0xFD,0xFB, 0x7F,0xFF,0xFF,0xFF,0xFF,0xCF,0xF3,0x7C, -0xFF,0x7F,0x8D,0x7F,0xFF,0xFF,0xFF,0xFF, 0xFB,0xFF,0xF7,0xFB,0xFE,0xFD,0xFF,0xFF, -0xFF,0xFF,0xF7,0xFD,0xFF,0x7F,0xFD,0x1F, 0xFD,0xFF,0xFF,0xFF,0xFF,0xBF,0xDF,0xFF, -0xFF,0xFE,0x5C,0xFF,0x6D,0xFF,0x7F,0xAB, 0xE7,0xF1,0xFF,0xFD,0x9F,0xFF,0xFF,0xAD, -0xEB,0x7A,0x3F,0x1F,0xFF,0xFF,0xFE,0xBF, 0xAF,0xF3,0xDE,0xF5,0xFF,0x8F,0xFB,0xDF, -0xE6,0x7F,0xFF,0xDF,0xF3,0xFD,0xFF,0x7E, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,0xF7,0xF3, -0x7F,0xDF,0xF7,0xEF,0xFF,0xF6,0x3F,0x9F, 0xDF,0xFF,0xFF,0xEE,0xFF,0xFF,0xEF,0xFB, -0xFF,0xFF,0xF9,0xFB,0xFE,0x4F,0xBF,0xEF, 0xBB,0xFF,0x69,0xAF,0xAF,0xFC,0xFF,0x3F, -0xDD,0xFF,0xFC,0xBF,0x8F,0xFF,0xFD,0xF3, 0xBF,0xED,0x9E,0xFC,0xBF,0x6F,0xF5,0xD3, -0xDF,0xFF,0xDB,0xD6,0xF5,0xEF,0xFD,0xFE, 0xFF,0xB9,0xFF,0x1F,0xD2,0xA9,0xAF,0xFF, -0xDB,0xF7,0xBF,0xEF,0x46,0xFF,0xFF,0xAD, 0xEB,0x7A,0xDF,0xEF,0xF7,0xFF,0x7F,0xF7, -0x9F,0xED,0xFF,0x7F,0xFF,0xAD,0xEB,0x7F, 0xF5,0x6F,0xFF,0xFD,0xFB,0xD6,0xF4,0xF7, -0xFB,0xF9,0x7E,0x7F,0xFF,0x5F,0xC2,0xFE, 0xBF,0xFD,0xFB,0x33,0xDF,0xF9,0x5B,0xFF, -0xFF,0xDD,0x67,0x7D,0xCF,0xEF,0xDB,0xEC, 0xFF,0x77,0xDD,0xF7,0xFD,0xFF,0xFF,0xDE, -0xA7,0xBF,0xD4,0x9F,0xFF,0xFF,0xBF,0xEF, 0xFE,0xFF,0xDF,0xEF,0xBB,0xFF,0xFF,0xEF, -0xEB,0xFA,0xFF,0xEF,0xBD,0xFB,0xFF,0xE2, 0x7F,0xFF,0xDF,0xDF,0xF7,0xFD,0xBF,0xBB, -0x73,0xF7,0xFD,0x7F,0xDF,0xDE,0xF7,0xBF, 0xEA,0xDB,0xF6,0xFF,0xD6,0xFF,0xFF,0x66, -0xFF,0xBE,0xFF,0xBF,0x6B,0xD9,0xF6,0xDF, 0xFF,0xFB,0x7E,0x7F,0xB7,0x7E,0xFF,0xFE, -0xFF,0xCD,0xFF,0xFE,0x7F,0xFF,0xFC,0xFD, 0x3F,0xFB,0xFB,0xF7,0xFF,0xFF,0xFB,0xF6, -0x7D,0xFE,0x7F,0xFF,0xFC,0xFF,0xB9,0xFF, 0xF9,0xFA,0xFE,0xBF,0xAF,0x5B,0xD6,0xED, -0xAD,0x7B,0xF6,0xF9,0xBF,0xEF,0xF8,0xFA, 0xFE,0xBF,0xFE,0xE6,0xFF,0xFF,0xF7,0xFD, -0xFF,0x7F,0xBF,0xEF,0xF3,0xFF,0xFF,0x6F, 0xF7,0xFE,0xFF,0xFF,0xF7,0xFD,0xFE,0xF7, -0xEF,0xFF,0xFB,0xEF,0xFB,0x7E,0xDE,0xFE, 0xFF,0xBF,0xFF,0xFE,0xFF,0xFF,0xFB,0xFF, -0xFF,0xEF,0xFB,0x6F,0xFC,0x1F,0xFE,0xE7, 0xFF,0xFF,0xFF,0xEF,0xFF,0xD3,0xB4,0xBB, -0xFF,0xFF,0xFD,0xBF,0x6F,0xE3,0xFE,0xFF, 0xBF,0xFC,0xBF,0xF7,0xCF,0xF7,0xFD,0xFF, -0x2F,0xDF,0xAB,0xEA,0xFF,0xDF,0xE7,0xEA, 0x9A,0xAF,0xEF,0xFB,0xFE,0xFF,0xF5,0x3F, -0xFD,0x7E,0xFF,0xD7,0xF5,0xFB,0xFF,0xFD, 0xF7,0xFF,0x7F,0xFE,0xF7,0xFD,0xFF,0xD7, -0xFF,0xD7,0x7F,0xEE,0x7F,0xFA,0x79,0xFE, 0x2F,0x8B,0xE6,0xF9,0xFE,0x3F,0x9E,0xF9, -0xBE,0x2F,0x0B,0xE7,0xF9,0xFE,0x2F,0x9F, 0xFD,0xFF,0xFE,0x7D,0x7F,0x5F,0xD7,0xFF, -0xFF,0x7F,0xFF,0xFD,0xFF,0x7F,0x5F,0x97, 0xFF,0xFD,0x7F,0x5F,0xFF,0xE3,0xFF,0xFF, -0xFA,0xFE,0xBF,0xAF,0xFB,0xFB,0xFF,0xFF, 0xCF,0xEB,0xFE,0xBF,0xAF,0xFF,0xFA,0xFE, -0xBF,0xFF,0x87,0xFF,0xFF,0xF5,0xFF,0xFF, 0xFF,0xFF,0xFD,0xFF,0x7F,0xFF,0xFF,0xFF, -0xFB,0xFF,0xFF,0xF5,0xFF,0xFF,0xFE,0x0F, 0xFF,0xFD,0xEB,0xFF,0xFF,0xF7,0xFF,0xEF, -0x7B,0xDF,0xFE,0xFF,0xFF,0xDF,0xF7,0xFD, 0xEB,0x7F,0xDF,0xFF,0x5F,0xFF,0xFF,0xFF, -0xFF,0xFD,0xBF,0xFF,0x7E,0xFA,0xBF,0xC7, 0xDB,0xF7,0xBD,0x3F,0xFB,0xFF,0xF6,0xFF, -0xFA,0xAF,0xFF,0xEB,0xFA,0xFE,0x3F,0x2F, 0xEA,0xFA,0x3E,0xAD,0xC9,0xBA,0xF6,0xAD, -0xAF,0xEB,0xFA,0xF6,0xBF,0xFE,0x7F,0xFF, 0xFF,0xFD,0xFF,0xF1,0x7F,0x3F,0xCF,0xF1, -0xEF,0xFF,0x7F,0xFF,0xBC,0xDF,0xDF,0xF7, 0xDD,0xFF,0xE0,0x7F,0xFF,0xFF,0xFE,0xFF, -0xFA,0xEC,0xBB,0x7F,0x5F,0xFF,0xFB,0xEC, 0xFF,0xEF,0xB7,0xFF,0xF7,0xFF,0xFF,0xB5, -0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xEE,0xDF, 0x5F,0xDF,0xDE,0xFF,0xAE,0xE7,0x77,0xFF, -0xFF,0xDF,0xF7,0xFF,0xE3,0xFF,0xFA,0xBB, 0xFE,0xFF,0xAF,0xFD,0xFB,0xFE,0xBF,0xAB, -0xF9,0xFE,0xFF,0xBF,0x7F,0xBF,0xFE,0xBD, 0xFE,0xD7,0xFF,0x9F,0xFD,0xFF,0xBE,0xEF, -0xFF,0xEE,0xFD,0xBB,0x5B,0xEF,0xFF,0x7F, 0xEF,0xFF,0xEF,0xFF,0x7F,0xFF,0x4F,0xFF, -0xEF,0xFB,0xBC,0xFC,0xFF,0xFF,0xFF,0xFE, 0xFE,0xFD,0xFA,0xFE,0xFB,0xFF,0xFD,0xF3, -0xFB,0xFF,0xF8,0x5F,0xFF,0xFF,0xD7,0xF5, 0xFD,0xDF,0xEF,0xFF,0xF3,0xDC,0x5F,0xCE, -0xF5,0xBD,0xFF,0xFF,0xD7,0xFF,0xFF,0xF9, 0x3F,0xFF,0xDF,0xF7,0xFF,0xFE,0xFF,0xFD, -0xFF,0xFB,0xFF,0xF7,0xB9,0x7D,0xFE,0xDF, 0xFF,0xFF,0xFF,0xFF,0xF9,0x7F,0xFF,0xFE, -0xFF,0xFF,0x7F,0xFF,0xFE,0xFF,0xFF,0xF7, 0xF6,0xFF,0xBF,0xF1,0xF8,0xFF,0xFF,0xFF, -0xFF,0xE0,0xFF,0xFF,0xFF,0xFF,0xF9,0xFF, 0xFF,0xFF,0xFF,0xFF,0xEF,0xEF,0xFF,0xFF, -0x9B,0xFB,0x7F,0xFF,0xFF,0xFF,0xC1,0xFF, 0xDF,0xFF,0x3F,0x5F,0xD7,0xBF,0xEF,0xBB, -0xDE,0xEE,0xFF,0x7F,0xDF,0xFF,0xFE,0xF5, 0x7F,0xDF,0xFF,0x99,0xFF,0xFF,0xFA,0xFF, -0xBF,0xFD,0xEB,0x7A,0xFF,0xB7,0xFE,0xFE, 0xFF,0xFF,0xEF,0xFF,0xFF,0xFD,0xBF,0xFF, -0x97,0xFF,0xFD,0xF7,0xFF,0x7F,0xF7,0xFF, 0xFF,0xFD,0x5F,0xFE,0xF3,0xF9,0xDF,0xDF, -0xFF,0xFF,0xFC,0xFF,0xFF,0x83,0xFF,0xFF, 0xFE,0xFF,0x9E,0xEC,0xFB,0xEE,0xFF,0x9F, -0xBF,0xEF,0xFF,0xFE,0xED,0x7B,0xFF,0xFF, 0xFF,0xF1,0x5A,0xFF,0xFF,0xFD,0xFF,0x7C, -0x69,0x3B,0xDF,0xFF,0x7F,0x1F,0xDF,0xFF, 0xFD,0xBA,0xFF,0xFF,0xFB,0xFF,0x5B,0xBD, -0xFF,0xFF,0xFF,0xFF,0xD7,0xB6,0xED,0xE9, 0xFF,0xD6,0xBD,0x6F,0x5F,0xFB,0xFF,0xEF, -0xFF,0x5F,0xFE,0xF6,0x6F,0xFF,0xFF,0xFF, 0xFF,0xF7,0xEB,0x7A,0xDF,0xFF,0x9F,0x7F, -0x7F,0xFF,0xB7,0xFF,0xFF,0xFE,0xDF,0xFF, 0x6C,0xFF,0xFB,0xFF,0xBB,0x6F,0xEB,0xFE, -0xCC,0xF7,0xA5,0xFA,0x5C,0xF5,0x75,0xBB, 0xB7,0xDF,0xFE,0x6F,0x5F,0xC5,0xBF,0xFD, -0x7B,0xFE,0xFF,0x95,0xE7,0x29,0xCF,0x4F, 0xF5,0x91,0xEE,0x6B,0xDF,0xEF,0xFD,0x54, -0xF5,0xBD,0xB1,0xFF,0xEF,0xEE,0xFB,0xBE, 0xBF,0xAF,0xFE,0xDE,0xBD,0x6F,0xDA,0xF2, -0xFF,0xAF,0xBE,0xFF,0xFF,0xFD,0x7E,0xA7, 0xFF,0xF7,0xFF,0xBF,0xEF,0x7B,0xF6,0xFD, -0xBD,0x4A,0xF2,0x85,0x85,0xBF,0x5B,0xFE, 0xB5,0xFD,0xFA,0xFF,0x4F,0xFF,0xFE,0xDF, -0xFF,0xED,0xFF,0xBF,0xFF,0xBF,0x7F,0xFE, 0xFF,0xB7,0x6D,0xFF,0xF7,0xBF,0xBF,0xEF, -0xFD,0x1F,0xFF,0xFE,0x7D,0xFF,0x67,0xFF, 0xFF,0xFF,0x3F,0x7F,0xFE,0xBF,0xFF,0xE7, -0xDF,0xE7,0xFF,0xEF,0x6B,0xFC,0x1F,0xFF, 0xBF,0xEF,0xFB,0xFE,0xDE,0xBF,0xAF,0xFA, -0xFF,0xB6,0xEF,0xF9,0xFE,0xFF,0x8F,0xEF, 0xDB,0xEF,0xAB,0x6F,0xFB,0xFE,0xFF,0xFF, -0xEF,0xFD,0xFF,0x7F,0xFF,0xFF,0xDE,0xFF, 0xFF,0xEF,0xFF,0xFF,0xFF,0x3F,0xFF,0x6C, -0xFF,0xBF,0xFB,0xFF,0xFE,0xFF,0xFB,0xFE, 0xDF,0xFF,0xFF,0xEF,0xFF,0xFF,0xBF,0xFF, -0xFF,0xFE,0xFB,0xFF,0xD5,0x7F,0xFF,0xFF, 0xEF,0xFB,0xFF,0xFF,0xBF,0xEF,0x43,0xB5, -0xFD,0x6F,0xCF,0xD6,0xBE,0x3F,0x7F,0xDB, 0xFE,0xC3,0xFF,0xFD,0xFF,0xAF,0xEB,0xFB, -0xFC,0xFF,0x3E,0xEF,0xE8,0xFA,0xBD,0xCD, 0xAA,0xFE,0xFE,0x7D,0xCF,0xFF,0xB7,0xFF, -0xF7,0xFF,0xFF,0xFF,0xFD,0xFF,0x75,0xCD, 0x52,0xD7,0xFD,0xFB,0xF7,0xDD,0xFB,0xEF, -0xEB,0xFF,0xFF,0x4F,0xFF,0xBF,0x9F,0xE7, 0xF9,0xFC,0x7F,0x8B,0xC3,0xF9,0xAF,0x8F, -0xE7,0xE9,0xBE,0x7F,0x9F,0xE6,0xF9,0xFC, 0x5F,0xFF,0xFF,0xF7,0xFD,0xFF,0x7A,0x5F, -0xD7,0xED,0xFF,0xFF,0xD7,0xFF,0xDD,0x7F, 0xE7,0xFF,0xFC,0xFF,0xFC,0x3F,0xFF,0xFF, -0xFF,0xFB,0xFF,0xFE,0xBF,0xAF,0xFF,0xFD, 0xFF,0xEF,0xFF,0xEB,0xFF,0xFF,0xFF,0xFF, -0xFF,0xF7,0x7F,0xFF,0x7F,0xDF,0xFF,0xFD, 0xFD,0x7F,0xFE,0xF7,0xFD,0x7F,0xDF,0xFF, -0xFD,0xFF,0xFF,0xDF,0xFB,0xFF,0xEE,0xFF, 0xFB,0xFF,0xF7,0xFD,0xFF,0x7A,0xDF,0xF5, -0xFD,0xFA,0xDF,0xF7,0xFC,0xFF,0x7F,0xDF, 0xBF,0xED,0xFF,0xC9,0xFF,0xDF,0xFF,0xBF, -0x2F,0xFB,0xFF,0xBC,0xAD,0xFF,0xF7,0xFF, 0xFF,0xEF,0xD3,0xFF,0x7D,0xBF,0x6F,0xFF, -0xFA,0xFF,0xFE,0xBF,0xAE,0xEA,0xFA,0xBE, 0xAD,0xA5,0xEB,0xCE,0xBF,0xA7,0xEB,0x5A, -0xDE,0xBD,0xAF,0x6B,0xFD,0x57,0xFF,0xFF, 0xF4,0x7F,0x1F,0x7F,0xFD,0xFF,0x7F,0x36, -0xF0,0xDF,0x79,0xFF,0xFF,0xFF,0xF7,0xFD, 0xBF,0xFF,0x87,0xFF,0xFB,0xF3,0xFC,0xFF, -0xFF,0xFF,0xFF,0x7E,0xFF,0xBF,0xDF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0xBF,0xF8,0x9F, -0xFF,0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFD, 0xF7,0xFC,0xBD,0xFF,0xFE,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFB,0xF9,0xBF,0xFF,0xFF,0xEB, 0xE2,0xFE,0xFF,0xBF,0xEF,0xA9,0xBA,0x2F, -0xEB,0xF9,0xFE,0x77,0xDF,0xF7,0xFF,0xFF, 0xF9,0x7F,0xFF,0xFF,0x7F,0xEF,0xD7,0xFF, -0xFD,0xFF,0xFB,0xF5,0xFF,0xBF,0x6F,0xDF, 0xFF,0xFF,0xFD,0xFF,0xFF,0xF0,0xFF,0xFF, -0xFF,0x3F,0xCF,0xFF,0xBA,0xEE,0x9B,0xBF, 0xEE,0xD7,0xFE,0xCD,0xEF,0xFF,0xDF,0xBF, -0xFF,0xFF,0xC5,0xFF,0xFF,0xFD,0x7F,0x4F, 0xFD,0xF6,0xD9,0xFF,0x4F,0xD6,0xFD,0xBF, -0x6E,0xFF,0xFF,0xF4,0x7F,0xFF,0x7F,0x8B, 0xFF,0xFF,0xFF,0xFF,0xF7,0xFF,0xF9,0xFE, -0x37,0xFF,0xD9,0xFB,0xF5,0xAF,0xFD,0xFF, 0xFF,0xFB,0xFF,0xFF,0x07,0xFF,0xFF,0xFF, -0xFB,0xF7,0xFF,0xFD,0xFF,0x7C,0xFA,0x7E, 0x4F,0xFC,0xDF,0x1D,0xC7,0xFF,0xFF,0xFF, -0xFF,0xAE,0xFF,0xFF,0xFF,0xFF,0xFD,0xFB, 0xFF,0xFF,0xFE,0xFE,0xFC,0xFF,0x7F,0x7F, -0xBF,0xEF,0xFE,0xFF,0xFF,0xFF,0x5F,0xFD, 0xFF,0xFF,0xFF,0xFD,0x6F,0x5A,0xD7,0x7B, -0xBE,0x5F,0xFE,0x39,0xFF,0xF7,0xFF,0xF7, 0xFD,0xFE,0xAA,0x1F,0xFF,0xFF,0xFF,0xFF, -0xFE,0xFE,0xAB,0xAF,0xFD,0xFE,0xBF,0xFF, 0xF7,0xFF,0x7F,0xFE,0x8F,0xE3,0xFB,0xEE, -0x7F,0xFF,0xFF,0xFF,0xFF,0xEB,0xFB,0xFF, 0xFD,0xBF,0xEF,0xDF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFB,0xE4,0x3F,0xFF,0xDF, 0xFF,0xFF,0xFF,0xFF,0xF3,0xEF,0xBB,0xFB, -0xBF,0xEF,0xBB,0xFF,0xD7,0xBF,0xFF,0xFF, 0xFF,0x29,0xAF,0xF7,0xFF,0xFF,0xFB,0xFF, -0xFB,0xE6,0xFF,0x0F,0xFB,0x3F,0xDF,0x0F, 0xFF,0xAF,0xFF,0xFF,0xFF,0xF5,0xC3,0xDF, -0x5F,0xFF,0xFF,0xFF,0xFE,0x6B,0xCA,0xBE, 0xBC,0xFF,0x9F,0xF2,0xBF,0xFF,0xFE,0xFA, -0xFF,0xFF,0xEF,0x16,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFC,0xDF,0x97,0xFD,0x79,0xFF,0x37, -0xE7,0x7F,0xFF,0xFF,0xB5,0xFF,0xFF,0xF6, 0x2F,0xFF,0xFD,0xFB,0xFE,0xFF,0xFF,0xFD, -0x5F,0x57,0x5F,0xFF,0xDB,0x52,0xDF,0xFF, 0xFD,0xBF,0xFF,0xFF,0xFC,0xDB,0xFF,0x7B, -0xB5,0xFD,0x7F,0xFF,0x71,0x9C,0x6E,0xFF, 0xF6,0x35,0xA5,0x9B,0xFF,0xFF,0xFD,0xFF, -0xFF,0xDB,0x9E,0x7F,0xFE,0xEF,0xFB,0xFF, 0xFF,0xBD,0xEF,0xFF,0xDE,0xB7,0xF9,0x4B, -0xFF,0xF5,0xEF,0xFF,0xFF,0xFF,0xE8,0x7E, 0xFF,0xEA,0xDF,0xF7,0xFF,0xFD,0x69,0x5B, -0xFC,0x9F,0xEF,0x78,0xD6,0xFF,0xEB,0xEF, 0xFF,0xFF,0xFF,0xE8,0xFF,0xFF,0xED,0xFF, -0xFF,0xFF,0xFF,0xE3,0xF9,0xF6,0xBF,0xFF, 0xFF,0xFE,0xDF,0xFF,0x7F,0xFF,0xFF,0xFF, -0xD1,0xFF,0xFF,0xE7,0xFF,0xFF,0xFF,0xFF, 0xE7,0xF9,0xFF,0xBF,0x7F,0xD9,0xFF,0xFD, -0xFE,0x7F,0xFF,0xFE,0xFF,0xF9,0xFF,0xFB, 0xD6,0xDF,0xBF,0xEF,0x5B,0xD6,0xFF,0xBF, -0xFB,0xF6,0xFF,0xBF,0xEF,0xF8,0xF6,0xDD, 0xBE,0xFE,0x16,0xFF,0xBF,0xEF,0xFF,0xFE, -0xFF,0xBF,0xEF,0xFF,0xFF,0xFF,0x6F,0xFB, 0xFF,0xFF,0xFF,0x6F,0xF3,0xFF,0xF7,0xEF, -0xFB,0xFF,0xBF,0xFF,0xEF,0xFE,0xFF,0xBF, 0xFF,0xFF,0xFF,0xBE,0xBF,0xFF,0xEF,0xFF, -0x7F,0xEF,0xFF,0xFD,0x17,0xFB,0x7B,0xFF, 0xFF,0xFD,0x7F,0xDB,0xF6,0xF4,0x7F,0xFA, -0xFE,0xF5,0xBF,0xEB,0xE3,0xF7,0xFF,0xFF, 0xE9,0xBF,0xFF,0xAF,0xF7,0xFD,0xF3,0x7E, -0x8F,0xA3,0xEA,0xFF,0xCB,0xF3,0xEE,0xFF, 0xBF,0xEF,0xF7,0xF9,0xFF,0xFE,0x7F,0xFF, -0xFF,0xFF,0xFF,0xF5,0xFB,0xF6,0xFF,0xF5, 0x2F,0xFE,0xFB,0xD7,0xBF,0xFF,0xBE,0xDF, -0x9F,0xFF,0xF0,0xFF,0xFF,0xF9,0xFE,0x7F, 0x8F,0xA3,0xF8,0xFE,0x6F,0x9F,0xF9,0xF6, -0x2F,0x9F,0xE7,0xF9,0xFE,0x2F,0x9F,0xE1, 0xFF,0xFF,0xFF,0x7F,0xDF,0xF7,0xF5,0xFD, -0x7F,0x7F,0xF5,0xFF,0x9F,0x5F,0xFB,0xFE, 0xFF,0x7F,0xFF,0xFF,0xCB,0xFF,0xFF,0xFB, -0xFE,0xFF,0xBF,0xAF,0xFB,0xFE,0xFF,0xDF, 0xFE,0xFE,0xBF,0xF7,0xFF,0xFF,0xFF,0xFF, -0xFF,0xC7,0xFF,0xFF,0xFD,0xFF,0x7F,0xDD, 0xF7,0xFD,0xFF,0xFF,0xD7,0xFF,0xFD,0x7F, -0xFF,0xFB,0xFD,0xFF,0xFF,0xFE,0xEF,0x7F, 0xFD,0xEF,0xFB,0xFE,0xFB,0xFD,0xFF,0x7F, -0xDF,0xFD,0xFF,0x7A,0xDF,0xF7,0xFD,0xFF, 0xFF,0xFF,0xFF,0x1F,0xFF,0xFF,0xD3,0xF7, -0xFF,0xFF,0x6F,0xDB,0xFF,0xFF,0xEF,0xCB, 0xF4,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE, -0x29,0xFF,0xE8,0xDA,0x76,0x9F,0xAF,0x6A, 0xDA,0xFE,0x35,0xEB,0xDA,0xD6,0xBF,0xAB, -0xEB,0x7A,0xDE,0xBF,0xD7,0x7F,0xFF,0xFE, 0xFF,0xBF,0xEF,0xFD,0xDF,0x77,0xBF,0xFD, -0x37,0xEF,0xFF,0xEF,0xFF,0x3F,0xFF,0xFF, 0xFF,0xFE,0x7F,0xFF,0xFF,0xFF,0xF7,0x7E, -0xDF,0xFF,0xFF,0xFF,0xFA,0xB7,0x7F,0xFF, 0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0x89,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0x9F,0xFB,0xFF,0xFF,0xFF,0xE7,0xFF, -0xFF,0xFF,0xFF,0xAA,0xFF,0xAB,0xFB,0xFA, 0xEF,0xBF,0xFF,0xDF,0xFA,0x7B,0xB9,0xFE, -0xFE,0xFF,0xFD,0xFF,0xF7,0xFE,0x3F,0xFF, 0xB7,0xFF,0xF7,0xEE,0xFF,0x7F,0xEF,0xFF, -0xFF,0x7F,0xFF,0x1F,0xFB,0xFF,0xBF,0xFB, 0xFE,0xFF,0xBD,0xFF,0xFF,0x2F,0xFF,0xBF, -0xFF,0x7F,0xDF,0xFA,0xFF,0xFF,0xFC,0xEE, 0xF5,0xF3,0xBE,0xFB,0x0F,0xEF,0xF3,0xBE, -0xEF,0xFC,0x5F,0xFF,0x5A,0xFF,0xF7,0xDF, 0xFF,0xFF,0xFE,0xD5,0xFC,0x5F,0xFB,0xF2, -0xFF,0xFF,0x2F,0xBB,0xF3,0xFF,0xFF,0xBF, 0xFF,0xEF,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF, -0xBF,0xFF,0xFF,0xFD,0x7B,0xFF,0xDF,0xB9, 0xFF,0xFB,0xFF,0xD8,0x7F,0xFF,0xFF,0xFF, -0xFB,0xFF,0xFC,0x7F,0x1F,0xBF,0xE0,0xDF, 0xF7,0xEF,0xFF,0xFD,0x7F,0xFE,0xDF,0xFF, -0xE0,0xFF,0xFF,0xFD,0xEF,0xFB,0xFF,0xFE, 0xF7,0xDF,0xFF,0xEB,0x5F,0xFF,0xF7,0xFF, -0xFF,0xFF,0xFF,0xBF,0xFF,0xFD,0xFF,0xFD, 0xFF,0xFF,0xFF,0xF7,0xFD,0xFF,0x3B,0xDC, -0xFD,0x6D,0x7B,0x5F,0x57,0xF5,0xFD,0x7F, 0x5F,0xFF,0xB1,0xFF,0xEB,0xFF,0xFF,0xFF, -0xFB,0xFB,0xFE,0xFF,0xBF,0xFB,0xBE,0xFF, 0xBF,0xEF,0xFB,0xFE,0xFF,0xAF,0xFE,0xF7, -0xDF,0xDF,0xFF,0xFF,0xFF,0x7F,0xCF,0xF3, 0xF8,0xFF,0xD7,0xFB,0xFF,0x5F,0xBF,0xF7, -0xFB,0xFF,0x7F,0xFE,0x23,0xFF,0xFF,0xFE, 0x7F,0xF3,0xFF,0xFB,0xFE,0xFF,0xFF,0xF3, -0xFF,0xFF,0xF5,0xF9,0xFF,0x3F,0xFF,0xFF, 0xF0,0x9A,0xFF,0xBE,0x7F,0xFF,0xFC,0xF9, -0xFF,0xFD,0xAF,0xEB,0xFE,0xBF,0xFF,0xCF, 0xF3,0xFE,0x7F,0xFF,0xFF,0x5B,0xBD,0xFF, -0xBC,0xEB,0xFF,0xD7,0xD4,0xAF,0xAF,0xFD, 0xFF,0xCF,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7, -0xFD,0xFE,0xFF,0x6F,0xFF,0xFB,0xFF,0xFF, 0xFF,0xFD,0x7F,0x5E,0xFD,0xBF,0xDB,0xF6, -0xFD,0xBF,0x6F,0xFB,0xEE,0xFD,0xFF,0x7A, 0xFF,0xFA,0xFB,0xFF,0x3F,0xFB,0xB7,0x5F, -0xD6,0xF7,0x1F,0x71,0xDC,0x77,0x1D,0xC7, 0x31,0xDC,0x77,0xDF,0xF9,0xBF,0xF5,0x5B, -0xF4,0xD7,0x9D,0xAE,0xFF,0xBF,0xFD,0xBF, 0xDB,0xF6,0xFD,0xBF,0x6F,0xDB,0xF6,0xFE, -0x3D,0x81,0xFF,0xEB,0xFE,0xFE,0xFE,0xFF, 0xEB,0x7A,0xDF,0x7D,0x77,0x7D,0xF5,0x79, -0xDF,0x57,0xDD,0xF5,0x7D,0x7E,0xE6,0xFF, 0xD6,0x3F,0xBF,0x7F,0xFF,0xD4,0xF5,0x3F, -0xBF,0xFB,0xBE,0xEF,0xB3,0xEE,0xFB,0x9E, 0xEF,0xBB,0xFE,0x8B,0xFF,0xFE,0xDF,0xB7, -0xED,0xFF,0xF7,0xFD,0xFE,0xFF,0xEF,0xBB, 0xEE,0xFF,0xBE,0xEF,0xBB,0xEE,0xEB,0xFC, -0x1F,0xFF,0xFF,0xFD,0xFF,0xE7,0xFF,0xF7, 0xFD,0xFF,0xEF,0xFE,0xFF,0xBF,0xEF,0xFB, -0xFE,0xFF,0xBF,0xEB,0xFA,0x1F,0xFF,0xB7, 0xEF,0x5B,0xFE,0xFF,0xAF,0xEB,0xDD,0xE7, -0xDE,0x77,0x9D,0xE7,0x79,0xDE,0x77,0x9D, 0xBF,0xE6,0x6F,0xFF,0xFE,0xFF,0xBF,0xEF, -0xFB,0xFE,0xFD,0xBF,0x6F,0xF6,0xFD,0xBF, 0x6F,0xDB,0xF6,0xFD,0xBF,0xFF,0x7E,0xFF, -0xFF,0xFB,0xFE,0xFE,0xFF,0xEF,0xFB,0xFD, 0xEF,0x7E,0xF7,0xBD,0xEF,0x7B,0xDE,0xF7, -0xBD,0xEF,0xFF,0xD5,0xFF,0xBF,0xFF,0xEF, 0xFE,0xFF,0xFC,0x3F,0x0F,0xE7,0xFE,0x7F, -0x9F,0xE7,0xF9,0xFE,0x7F,0x9F,0xE7,0xFE, 0xF3,0xFF,0xFE,0xDF,0xAD,0xDF,0x67,0xEE, -0xFB,0xBF,0xEF,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFE,0xFF,0xBF,0xEF,0xFF,0x23,0xFF,0xFF, -0xFF,0xFF,0x7F,0xFF,0xF3,0xBC,0xDB,0xFE, 0xFB,0xFF,0xFB,0xBE,0xF7,0xFB,0xFF,0x7F, -0xDF,0xFF,0xCF,0xFB,0xFF,0x9F,0xE3,0xF9, 0xBE,0x3F,0x8F,0xE7,0x79,0xFF,0x9D,0xE7, -0xF9,0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x5F, 0xFF,0xCF,0xF7,0xFF,0xFF,0xFF,0xDF,0xF7, -0xFE,0x7F,0xE7,0xF9,0xFE,0x7F,0xFF,0xFF, 0xFB,0xFE,0xFF,0xFF,0xBF,0xFF,0xBF,0xBF, -0xFF,0xFE,0xFF,0xBF,0xEF,0xFF,0xFD,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFD,0xFF, -0xFF,0x3F,0xFF,0xBF,0xFF,0xF7,0xFF,0xFF, 0x7F,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xE8,0xEF,0xFF, 0x5F,0xF7,0xBF,0xF9,0xFE,0xDF,0xB7,0xFD, -0xFF,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7, 0xFD,0xFF,0xDD,0xFF,0xF2,0xFF,0xBF,0xFF, -0xFF,0xBF,0xFF,0xFF,0x2F,0xF2,0xFF,0xBF, 0x2F,0x7B,0xD2,0xF7,0xBF,0x2F,0xFF,0xBB, -0xFF,0xEE,0x8F,0xAF,0xEB,0xFA,0xFE,0x3F, 0xA7,0x69,0xCE,0x8F,0xA4,0xEA,0xFA,0xEE, -0xB7,0xAE,0xEB,0xFD,0xC7,0xFF,0xF7,0xF7, 0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x3E,0xF3, -0x74,0xFF,0x3F,0x4F,0xFF,0xE7,0xFF,0x3F, 0xFE,0xA7,0xFF,0xFF,0xDF,0xF7,0xB7,0xFF, -0xF7,0xFF,0xBA,0xEF,0x37,0xEB,0xFB,0xFE, 0xBF,0xFB,0xFE,0xF3,0xFF,0xF9,0xDF,0xFF, -0xBF,0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF, 0xFD,0xDF,0xFF,0xFD,0xFF,0xFF,0xFB,0xFE, -0xFD,0xFF,0xFB,0xBF,0xFE,0x3F,0xED,0xFF, 0xDF,0xBE,0x3D,0xA7,0xFB,0xFA,0x3F,0xE6, -0xE1,0xFE,0xFE,0x3F,0xEF,0xE3,0xDF,0xF5, 0x7F,0xFE,0xFF,0x7E,0xFF,0xFF,0xFF,0xFF, -0xEF,0x6F,0xF6,0xFF,0x7D,0xEF,0xD7,0xDE, 0xFF,0x7D,0xEF,0xFF,0xF2,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0x7B,0xDE,0xFB,0xE6,0xEE, 0xEF,0x37,0x6E,0xF3,0x7E,0xEB,0x37,0xEF, -0xFF,0xC1,0xFF,0xFE,0xFF,0xF7,0xEF,0xFF, 0xFF,0xFF,0xBF,0x3F,0xD2,0xDF,0xBF,0x2F, -0x7B,0xE2,0xFF,0xFE,0x3B,0xBD,0xDB,0xFF, 0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFE, -0xFF,0xFB,0xFF,0xFF,0xBF,0xFF,0xFB,0xDF, 0xFF,0xBF,0xFF,0xB7,0xFF,0xFF,0xBF,0xEF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0xFF, 0x7F,0xFF,0x1F,0xEF,0xF1,0xFD,0xFF,0xF6, -0xAF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFF, 0xFF,0xFF,0xFE,0x9F,0xFF,0xFF,0xFF,0x77, -0xEF,0xF7,0xFB,0xFF,0xFE,0x5F,0xFF,0xFF, 0xBF,0xCF,0xFB,0xF7,0xDD,0xF7,0xF5,0xFF, -0x5F,0xD5,0xF5,0xFD,0x7F,0x5F,0xD7,0xF5, 0xFF,0xFB,0x0F,0xFF,0xFF,0xA9,0xEA,0x7A, -0xFF,0xAF,0x8F,0xFE,0xDF,0xAF,0xEF,0xFB, 0xFE,0xFF,0xBF,0xEF,0xFB,0xDF,0xE5,0x5F, -0xFF,0xFF,0xFF,0xFF,0xFF,0xBD,0x57,0xFF, 0xFF,0x6F,0x77,0xBF,0xF7,0xFB,0xFF,0x7F, -0xBF,0xF7,0xFF,0xFC,0xBF,0xFF,0x9F,0xFF, 0xFF,0xEF,0xFF,0xFE,0xFF,0xFF,0xFF,0x1F, -0xCF,0xFF,0xFC,0xFF,0xFF,0xFF,0xFF,0xFB, 0x65,0xAF,0xF3,0x7C,0xFF,0x3F,0xDF,0xFF, -0xFD,0xE9,0xFE,0x7F,0xE7,0xFF,0xFE,0x7F, 0xFF,0xFF,0xFF,0xFF,0xFD,0xE3,0xDF,0xFB, -0xDB,0xF6,0xFD,0xEF,0x5B,0xFB,0xFF,0xDF, 0xFC,0xFF,0x3F,0xDF,0xF3,0xFD,0xFF,0x7F, -0xDF,0xEF,0x66,0xFF,0xDF,0xAD,0xEB,0x7A, 0xDE,0xF7,0xF7,0xE7,0xD9,0xFD,0x9F,0x67, -0xD9,0xF6,0x7D,0x9F,0xE7,0xDF,0xF5,0x47, 0xFD,0x65,0x5B,0xD6,0xF4,0xFE,0xFF,0xEF, -0xFF,0x6D,0xF6,0xDD,0xB7,0x6D,0xDB,0x76, 0xDC,0xB7,0x7D,0xFA,0x9B,0xF6,0x6D,0x9D, -0x67,0x59,0xDF,0xF7,0xDD,0xFF,0xEB,0xFE, 0xBF,0xAF,0xEB,0xFA,0xFE,0xBF,0xAF,0xE3, -0xD1,0x9F,0xFF,0xBD,0xBF,0xEF,0xFE,0xF7, 0xBF,0xBF,0xF7,0xD7,0x7F,0xDD,0xF7,0x9D, -0xDF,0x7F,0xDF,0xF7,0xFF,0xE0,0x7F,0xFD, 0xC1,0xDF,0xF7,0xFD,0xC7,0x7F,0x7F,0xFB, -0xFF,0xBB,0xEC,0xFB,0x3E,0xFF,0xBF,0xEC, 0xFB,0xFF,0xD8,0x7F,0xBF,0x6C,0xFF,0xBE, -0xFF,0xBF,0xED,0xFF,0xEF,0xFE,0xFB,0xBF, 0xEF,0xFB,0xFE,0xFF,0xBF,0xEE,0xFF,0xC5, -0xFF,0xAF,0x6F,0xFF,0xFC,0xFD,0x3F,0xE7, 0xFF,0xFE,0xFF,0xEF,0xFB,0xFE,0xFF,0xBF, -0xEF,0xFB,0xFE,0xBF,0x89,0xFE,0xFA,0xBA, 0xFE,0xBF,0xAF,0xFB,0xF6,0xF5,0xD9,0x7D, -0x97,0x65,0xD9,0x74,0x5D,0x97,0x65,0xD3, 0xFE,0xD6,0xFF,0xBF,0xF7,0xFD,0xFF,0x7F, -0xBF,0xCF,0xFB,0xFE,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xEF,0xFB,0xFF,0xF6,0x8F,0xFB, -0xFF,0xEF,0xFB,0x7E,0xDB,0xFE,0xFF,0xBE, 0xEF,0xEE,0xFB,0xBE,0xEF,0xBB,0xEE,0xFB, -0xBE,0xFF,0xFF,0xDF,0xFF,0x43,0xFF,0xFF, 0xFB,0xEF,0x5F,0xB7,0xFE,0x7F,0xE7,0xF9, -0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0xF9, 0xBF,0xFE,0xAF,0x77,0xFD,0xFF,0x2F,0xAF, -0xA7,0xFE,0xFF,0xEF,0xFB,0xFE,0xFF,0xBF, 0xEF,0xFB,0xFE,0xFF,0xF1,0x7F,0xEF,0xDF, -0xFF,0x97,0xF5,0xEF,0xFF,0xDF,0xFF,0xFF, 0xBF,0xFF,0xBF,0xFF,0xFF,0xFE,0xFF,0xFF, -0xFF,0xE0,0xFF,0xFF,0xF9,0xFE,0x2F,0x8B, 0xE3,0xF8,0xBE,0x77,0x9F,0xF9,0xDA,0x77, -0x9D,0xE7,0x79,0xDE,0x77,0x9F,0xDD,0xFF, 0xFD,0xFD,0x7F,0x5F,0xD7,0xFD,0xFF,0x7F, -0xE7,0xFE,0x7F,0x97,0xE7,0xFB,0xFE,0xFF, 0xBF,0xEF,0xFF,0xAB,0xFF,0xEF,0xFA,0xFE, -0xBF,0xAF,0xFF,0xFA,0xFF,0xFF,0xDF,0xFF, 0xFB,0xFF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFF, -0x67,0xFF,0xF7,0xF5,0xFF,0xFF,0xFF,0xDF, 0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFF,0xBD, 0xEB,0xFF,0xFF,0xF7,0xAD,0xEB,0xFF,0xDF, -0xFD,0xFF,0x3F,0xDF,0xF7,0xFD,0xFF,0x7F, 0xDF,0xFF,0x5F,0xFF,0xF7,0xFF,0xFF,0xFD, -0xBF,0xFF,0xCB,0xF4,0xFF,0x7F,0xD3,0xF7, 0xFD,0x3F,0x7F,0xD3,0xF7,0xFF,0xFC,0x3F, -0xFF,0xEA,0xFA,0xBE,0xAF,0xAB,0xEB,0xBA, 0xF4,0x95,0x6B,0x52,0xD4,0xAD,0x2F,0x4A, -0xD2,0xF6,0xBF,0xD2,0x7F,0xF7,0x3F,0xFF, 0xFF,0xF3,0x7F,0xFF,0xFF,0xF7,0xFF,0xBA, -0xDF,0xFB,0xFD,0xFF,0xBF,0xFF,0xFB,0xFF, 0xF8,0x7F,0xEA,0xFF,0xFE,0xFE,0xDF,0xFF, -0xF7,0xFF,0x7F,0xBB,0xFF,0xFF,0xBF,0xDF, 0xFB,0xFF,0xFF,0xBF,0xFF,0xB1,0x7F,0xFF, -0xFB,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xBF, 0xCF,0xFE,0xFF,0xFF,0xEF,0xFF,0xF7,0xFF, -0xFF,0xFF,0xF1,0xFF,0x69,0xBE,0xFA,0xBF, 0xAF,0xE2,0xFF,0xFE,0xFD,0xAF,0xF3,0xFE, -0xFF,0xBF,0xEF,0xFB,0xFC,0xFF,0xFF,0x07, 0xFD,0x95,0xDB,0xDF,0x7F,0xDF,0xAF,0xFF, -0xF7,0xAF,0x36,0xFE,0xBF,0x65,0xEB,0xF6, 0xFE,0x9F,0x6F,0xFE,0x07,0xFF,0xCF,0xFF, -0xF8,0xFE,0xFF,0xCF,0xFF,0xF6,0xFA,0xE7, 0xFB,0xFE,0xFF,0xBB,0xED,0xF9,0xFF,0xFF, -0xFF,0x5F,0xFF,0xFF,0xFF,0x75,0xFF,0xEF, 0x7E,0xFD,0xE0,0xE8,0x5E,0xD3,0xE5,0xF9, -0x3E,0x5F,0xD7,0xF7,0xFF,0xFA,0x2F,0xFB, 0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0x7F, -0x7F,0xD7,0xF5,0x7D,0x5F,0x57,0xD5,0xF5, 0xEF,0xFF,0xF3,0x7F,0xFC,0x7F,0xFF,0xC7, -0xF1,0xFF,0xFF,0x1F,0xCF,0xB0,0xFF,0x3F, 0xCF,0xF3,0xFC,0xFF,0x3F,0xCE,0xFF,0xE4, -0xFF,0xDF,0x7F,0xFE,0xF7,0xBB,0xFF,0xFF, 0xDF,0xEF,0xEE,0xFF,0xBF,0xEF,0xFB,0xFE, -0xBF,0xBF,0xEF,0xFF,0xD1,0xFF,0xFF,0xFF, 0xFD,0xFB,0xFF,0xFD,0xFF,0xFB,0x9F,0xE9, -0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0xBF, 0xFF,0xB3,0xFF,0xFF,0xF7,0xFF,0xFF,0xAF, -0xF7,0xFF,0xB6,0x3F,0xEB,0xFA,0xFE,0xBF, 0xAF,0xEB,0xFA,0xFE,0xBF,0xFE,0xA7,0xFF, -0xFF,0xFF,0xFF,0xFF,0xF7,0xFF,0xFF,0xFF, 0xFE,0x9F,0xF7,0xF9,0xFF,0x7F,0x9F,0xE7, -0xFF,0xFF,0xFE,0xAF,0x6F,0xFF,0xFF,0xFF, 0x9F,0xFF,0xDF,0xFF,0x7D,0x5F,0xDD,0xFF, -0xFB,0xBF,0xE7,0xBB,0xFF,0xFB,0xDF,0x6D, 0x5F,0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xEB,0xF7,0xFF,0xE7,0xEF,0xF7,0xFF,0xFF, 0x7F,0xFF,0xF7,0xFF,0xFC,0x8F,0xFF,0xEF, -0xFD,0xFE,0xFF,0xBE,0xF4,0xF2,0x7D,0xD7, 0xCF,0xFF,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xCF,0x6B,0xFF,0xBF,0x3F,0xFB,0xF2, 0xFC,0x7F,0xEB,0xFF,0x9F,0xFA,0xFF,0xFF, -0x3F,0xFF,0xF3,0xFF,0xFF,0xFD,0x70,0xF7, 0xFF,0xFF,0xBF,0xFF,0xFB,0xD7,0xFE,0xF5, -0x77,0xFF,0x15,0xDD,0x77,0xFD,0xFF,0x7F, 0xDF,0xF7,0xFB,0xCD,0xBF,0xFF,0xFD,0xFF, -0xFF,0xDF,0x37,0xCD,0xF9,0xEC,0xFE,0xEF, 0xBB,0xF4,0xFB,0x3F,0x4F,0xB3,0xFF,0xFD, -0xCB,0xFF,0xE9,0x7E,0x54,0x9F,0xE5,0x4B, 0xB7,0xFF,0xDD,0x7D,0xC7,0x71,0xDD,0x77, -0x5D,0xD7,0x75,0xCD,0x7F,0xD6,0xFF,0xD3, 0xF6,0xF9,0x3F,0x6D,0x95,0xAF,0x7F,0xFE, -0xFF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFE,0xF6,0xC7,0xFF,0xAD,0x7B,0xCA,0xFF, -0xBF,0xBF,0xEF,0xFD,0xE3,0xDF,0xB7,0xED, 0xFB,0x7E,0xDF,0x37,0xED,0xE3,0xFB,0xDF, -0xFF,0x52,0x5C,0x15,0xFD,0xCF,0x7F,0xDF, 0xFE,0xEF,0xEF,0xFB,0xFE,0xFF,0xBF,0xEC, -0x7B,0xFE,0xFF,0xFE,0x3E,0x7F,0xDA,0xF7, 0xFD,0xFF,0x7F,0xFF,0xFF,0xFB,0xEF,0xBB, -0x6F,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0xFF, 0xF7,0x7D,0xFF,0xD8,0xFF,0xFD,0xBF,0x7F, -0xFB,0xFF,0xFF,0x9F,0xFB,0xFE,0x7F,0x9F, 0xE7,0xF9,0xFE,0x7F,0x9F,0xEA,0x7F,0xF6, -0xBF,0xBD,0x6A,0x5A,0xF6,0xE5,0xBF,0x77, 0x5F,0x6D,0xDD,0x77,0x5D,0xD7,0x75,0xDD, -0x77,0xFF,0xA5,0xBF,0xCF,0xFB,0xFF,0xFF, 0xBF,0xCF,0xFB,0xFD,0xFF,0xBF,0xF3,0xFE, -0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFD,0xAB, 0xFF,0xBF,0xBF,0xFF,0xFB,0xFF,0x7F,0xEF, -0xFF,0xBE,0xFB,0xEE,0xFB,0xBE,0xEF,0xBB, 0xEE,0xFB,0xBF,0xFF,0xB5,0xFF,0xD0,0xBC, -0xFD,0x2F,0x4B,0xF7,0xFF,0xFF,0x9F,0xF9, 0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0x9F, -0xFA,0x8F,0xFD,0xAB,0xFA,0xDA,0xBF,0xAF, 0xB3,0xFD,0xFF,0xBF,0xFB,0xFE,0xFF,0xBF, -0xEF,0xFB,0xFE,0xF7,0xBF,0xFF,0x9F,0xFF, 0x77,0xF7,0xBD,0xFD,0x77,0xDF,0xFF,0x7E, -0xDF,0xED,0xBB,0xFE,0xFF,0xBE,0xEF,0xFB, 0xFE,0xFF,0xFA,0x3F,0xFF,0xBE,0x6F,0x8F, -0xE6,0xF9,0xFE,0x7F,0x9F,0xC7,0xFE,0x7F, 0x9F,0xE7,0xF9,0xFE,0x7F,0x9F,0xE7,0xFB, -0x7F,0xFF,0x7F,0xCF,0xFF,0xFD,0xFF,0xFF, 0xDF,0xFB,0xAF,0xBF,0xEF,0xFF,0xFE,0xFF, -0x9F,0xEF,0xFB,0xFF,0xFC,0xFF,0xFB,0xFE, 0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0xF7, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xF5,0xFF,0xFF,0xFF,0x3F,0xDF,0xF7, -0xFF,0xFF,0x7F,0xEF,0xFE,0xFF,0xBF,0xFF, 0xFB,0xFF,0xFF,0xBF,0xEF,0xFF,0xB3,0x7F, -0xFF,0x7B,0x5E,0xF7,0xFD,0xFF,0x7B,0x7F, 0xF7,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0x7F, -0xDF,0xF7,0xFF,0x17,0xFF,0xFF,0xFF,0x7F, 0xFF,0xFF,0xDD,0xF6,0xFC,0xBF,0xCB,0xF2, -0xBC,0xBF,0x2F,0xCB,0xF2,0xFC,0xBF,0xFE, 0x8F,0xFF,0xFA,0x7E,0xBF,0xA7,0xEB,0xDA, -0xFC,0xBF,0xAF,0x7A,0xFE,0xBF,0xAF,0xEA, 0xFA,0xFE,0xBF,0xAF,0xF4,0xDF,0xFE,0xFF, -0xF3,0x3C,0x7F,0x3E,0xFF,0xCF,0xF8,0xBF, 0x8F,0xE3,0xF8,0xFE,0x3F,0x8F,0xE7,0xE8, -0xFF,0xFC,0x9F,0xFF,0xFF,0xCF,0xEB,0xB3, 0xE7,0xFB,0x7B,0xF3,0xFE,0xFF,0xCF,0xDB, -0xFB,0xFB,0xBF,0x6F,0x6F,0xDF,0xEC,0x7F, 0xFF,0xFF,0xF7,0xFD,0xFD,0xFF,0xFF,0xFF, -0xFF,0xB2,0xBF,0xFF,0xDE,0xFD,0xBD,0xEF, 0xFB,0xF6,0xDF,0xEA,0xE7,0xDB,0xFE,0xBB, -0xFF,0xEB,0xFB,0xBF,0x9F,0x8F,0xE8,0xFE, 0x3F,0x8F,0xA3,0xF8,0xFE,0x3F,0x8F,0xFF, -0xF8,0x7E,0xFD,0xFD,0x7F,0xFF,0xFB,0xCD, 0xFF,0xFD,0xFF,0x5F,0xEF,0xFD,0xFF,0xFF, -0xDF,0xF7,0xFD,0xFF,0xBE,0x90,0xFF,0xFF, 0xEE,0xFF,0x3F,0xBF,0xF3,0xBB,0xFE,0xB7, -0xAB,0xFA,0xFE,0xAF,0xAD,0xEA,0xFA,0xDE, 0xAB,0xFF,0x63,0xFF,0xFE,0xF2,0xFF,0xB3, -0xFF,0xDF,0xEE,0x7D,0xFF,0x03,0xF1,0xF4, 0x3F,0x1F,0xC3,0xF1,0xEC,0x7F,0xFE,0x6F, -0xFF,0xFB,0xFB,0xFF,0x9F,0xFF,0xBF,0xFF, 0x7B,0x5F,0xFD,0xFF,0xDF,0xF7,0xFD,0xFD, -0x7F,0x7F,0xDF,0xFE,0xCF,0xFB,0xFF,0xFF, 0xAF,0xFB,0xFF,0x1F,0xEF,0xA5,0xFD,0xBF, -0xDF,0xFB,0x7D,0xFF,0xBF,0xDF,0xFB,0xFF, 0xFD,0x3B,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, -0xAF,0xF3,0xFF,0xFB,0x7F,0xBF,0xD7,0xFB, 0xBF,0x7F,0xBB,0xF7,0xFF,0xF8,0x7F,0xFF, -0xFA,0x5F,0xD7,0xFF,0xDF,0x7F,0xEF,0xFF, 0xFF,0x7F,0xDB,0xF7,0xFD,0xFF,0x7F,0xDF, -0xB7,0xFB,0xEC,0xFF,0xFF,0xF7,0xBF,0xEF, 0xFD,0xFC,0xFB,0xFF,0xEF,0xF0,0xFE,0x3F, -0x8F,0xE3,0xF8,0xFE,0x3F,0x8F,0xEF,0x8D, 0xFF,0xFF,0xEF,0x7F,0xBF,0xFF,0xFB,0xFF, -0xDB,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xEF,0xD8,0xFF,0x2E,0x7F, -0xBE,0xEF,0xFE,0x6E,0xFF,0xBF,0xF9,0xFF, 0xFF,0xF3,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFC,0x66,0xBE,0x47,0xF3,0x7F,0xDF,0xFE, 0x87,0x9F,0xFF,0xFF,0xFF,0xFF,0xE7,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xD6,0x6F,0x7C, 0xFB,0x4F,0xD2,0xFF,0xFD,0x2B,0xFE,0xFF, -0xFF,0xFD,0x5F,0xD7,0xD5,0xF5,0x7D,0xFF, 0xFF,0xFF,0xBF,0x9B,0xFF,0xFF,0xDF,0xB7, -0xFF,0xFF,0xDF,0xFF,0x3F,0xCF,0xFE,0x7F, 0xBF,0xEF,0xFB,0xFC,0xFF,0x3F,0xFF,0xD9, -0xBF,0xFE,0x97,0xEC,0x8F,0xB7,0xFE,0x9B, 0x7D,0xFD,0xB7,0xDD,0x77,0x1D,0xC7,0x71, -0xDD,0x77,0x5D,0xD7,0xF3,0x6F,0xFD,0x3F, 0x73,0xDD,0xAF,0xFD,0x7A,0xFF,0xFF,0xAF, -0xFE,0xFD,0xBF,0xEF,0xFB,0xFE,0xFF,0xBF, 0xEF,0x66,0x7F,0xFF,0xFF,0xBF,0xBF,0xFF, -0xFB,0xFF,0xF7,0xDF,0xFD,0xFB,0x7D,0xDF, 0xB7,0xCD,0xF3,0x7C,0x5F,0x3F,0x91,0x3F, -0xFF,0x3D,0xEF,0x7B,0xFF,0xFC,0xFF,0xCA, 0xEF,0xFE,0xFF,0xBD,0xEF,0xFB,0x1E,0xE7, -0xBB,0xEC,0x7F,0xB3,0xFF,0xFD,0x9F,0xFF, 0xFF,0xFE,0xFF,0xFF,0x7F,0xBF,0xFB,0xFE, -0xFF,0xBF,0xEF,0xFB,0xEE,0xFB,0xBF,0xDF, 0x67,0xFF,0xFF,0xBF,0xEF,0xDB,0xFF,0xBC, -0xFE,0x7F,0xFB,0xFF,0x9F,0xEF,0xF9,0xFE, 0x7F,0x9F,0xE7,0xF9,0xFE,0x87,0xFF,0xEE, -0xFB,0xBE,0xE5,0xBF,0xEF,0xF9,0xD7,0x65, 0xF7,0xDD,0xE7,0x7D,0xDF,0x77,0x5D,0xD7, -0x7F,0xF8,0x9B,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFF,0xFF,0xBF,0xEF,0xFB,0xFF,0x7F,0xCF, -0xF3,0xFC,0xFF,0xBF,0xEF,0xFF,0xDB,0x3F, 0xEF,0xFB,0xFE,0xFF,0xDF,0xFF,0xFE,0xFB, -0xBB,0xEF,0xBF,0xEF,0xBB,0xEE,0xFB,0xBE, 0xEF,0xBB,0xFF,0xFC,0x7F,0xFD,0x3B,0x5B, -0xD6,0xE5,0xFD,0x4F,0xC3,0xFB,0xFF,0xBF, 0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0xFF, -0xB4,0xFF,0xFA,0xBC,0x8F,0xB2,0xE9,0xD2, 0x2E,0xCF,0xFB,0xFF,0xBF,0xEF,0xFB,0xFE, -0xFF,0xBF,0xEF,0xFB,0xFF,0xEC,0xFF,0xFD, 0xFD,0x7F,0xDF,0xF7,0xE4,0xDF,0x5F,0xFF, -0xFF,0xFB,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xC3,0xFF,0xEF,0xE6,0xF8,0xFE, -0x3F,0x8B,0x83,0xF9,0xFE,0x7F,0xE7,0xF9, 0xFE,0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0x17, -0xFD,0xFF,0xFF,0xFF,0x7F,0x5F,0xF7,0x2C, 0xFF,0xFF,0xFF,0xFE,0x7F,0xFF,0xE7,0xF9, -0xFE,0x7F,0x9F,0xFE,0x2F,0xFF,0xFF,0xEF, 0xFF,0xFE,0xBF,0xEF,0xAD,0xFF,0xFF,0x7F, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFE,0xDF,0xFF,0xDF,0xFF,0xFD,0xFD,0x7F, -0xDF,0xF7,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFA,0x3F,0xFE, -0xF7,0xFD,0xEF,0x7A,0xFF,0xB1,0xBD,0xFF, 0x7F,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7,0xFD, -0xFF,0x7F,0xF3,0x27,0xFF,0xDF,0xFF,0xDD, 0xFF,0xFC,0x9B,0xFF,0xCB,0xFC,0xBF,0x2F, -0xCB,0xF2,0xFC,0xBF,0x2F,0xC9,0xFF,0xDE, 0xFF,0xDF,0xAF,0xEB,0xDA,0xFE,0xBB,0xAF, -0xEB,0xF8,0xF7,0xAF,0xE8,0xFA,0xFE,0xBF, 0xAF,0xEB,0xF2,0xFF,0xFD,0xFF,0xFF,0xEF, -0xBD,0xD7,0xBF,0xFF,0xFF,0xDE,0x8F,0xB8, 0xDE,0x37,0x8D,0xA3,0x78,0xDA,0x3F,0x8F, -0xFF,0xA1,0xFF,0xFF,0xFB,0xFB,0xFF,0xFF, 0xFF,0xFF,0xA7,0xBD,0xFB,0x76,0xFD,0xBF, -0xEF,0xDB,0xFE,0xBB,0xBF,0xFE,0x27,0x7F, 0xFF,0xFE,0xFE,0xFD,0xF5,0xFF,0xEF,0xF5, -0xDF,0x1F,0xE7,0xFD,0xFF,0x7F,0xDF,0xF7, 0xFD,0xFF,0xFF,0xCD,0xFD,0xAE,0xFF,0xFA, -0x3E,0x3F,0xAB,0xFD,0xF8,0x7E,0x8F,0xE3, 0xF8,0xFE,0x3E,0x8F,0xE3,0xF8,0xFF,0xFE, -0x1F,0xEF,0xDF,0xBF,0xFE,0xDE,0xDF,0xD9, 0xFF,0xDF,0xBC,0xFF,0xFF,0x7F,0xFF,0xEF, -0xFD,0x7F,0xDF,0xF7,0xF9,0x3F,0xFE,0xFF, 0xFF,0x6F,0xFE,0xDE,0xBF,0xF7,0xED,0xEA, -0xFD,0x8F,0x83,0xF8,0xEA,0x3F,0x8F,0xEF, 0xFF,0xF4,0x7F,0xFF,0xEF,0xEF,0x7B,0xF3, -0xF1,0x5F,0xFF,0xFF,0xF1,0x3B,0x7F,0xDF, 0xF7,0xFD,0xFF,0xFF,0xFF,0xFF,0xE0,0xFF, -0xFF,0xFF,0xF7,0xFF,0x6F,0xFF,0x7F,0xFF, 0xFF,0xF7,0xDE,0xF7,0xBF,0xEF,0xFB,0xF7, -0xFD,0xFF,0xFF,0xF5,0xFA,0xFF,0xFF,0xFB, 0xE7,0xFF,0xF3,0xF8,0x7F,0xF3,0xDF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x1F,0xEF, 0xBB,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, -0xFF,0x7F,0xFF,0x9F,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xCF,0xFF,0x37,0xFF,0xFF, -0x7F,0xDF,0x77,0x5D,0xE7,0xFC,0xFF,0xBF, 0xF7,0xF5,0xFB,0xFF,0xFF,0xD7,0xF5,0xFB, -0xFF,0xFF,0x45,0xFD,0x7F,0xEA,0xFD,0xBE, 0xBF,0xDF,0xF7,0xFF,0xFF,0xDB,0xFB,0xFE, -0xFF,0xBF,0xEF,0xFF,0xFF,0xFF,0xFB,0x5F, 0x7F,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFE,0xFF,0xEF,0xFD,0xFF,0x7F,0xDF, 0xFF,0xEF,0xFB,0xF8,0x0F,0xF3,0xFF,0xF9, -0x2E,0xFB,0xFE,0xFC,0xF3,0xEF,0xFF,0xFF, 0xBF,0xFF,0xFB,0xE7,0xFF,0xFE,0x7E,0xFF, -0xC0,0x6B,0xCF,0xFF,0x34,0xDF,0xF1,0xFD, 0xFF,0xEF,0xFF,0xFF,0xFF,0xDF,0xF7,0xFD, -0xCF,0x7F,0x9C,0xFD,0xFD,0x6C,0xF7,0xFF, 0xF6,0xFD,0xEB,0x2B,0x9F,0xFF,0xFC,0xFE, -0x7E,0xFF,0xFF,0xFF,0xFF,0xD7,0xF3,0xF7, 0xFF,0xFB,0xE1,0xBF,0xFF,0xEB,0x7A,0xDE, -0xD7,0xFB,0xFF,0xF9,0xFE,0xFF,0xFF,0xF3, 0xDE,0x7F,0xFD,0xE7,0x7F,0xFF,0xFD,0xBB, -0xFF,0xFF,0x7E,0xCC,0xF6,0xAF,0x5F,0x7F, 0xFE,0xF4,0x7D,0xF7,0xFD,0xBB,0x6E,0xDB, -0xB7,0xFF,0xF7,0xDF,0x66,0xFF,0xFF,0xF7, 0x3D,0xCF,0xDE,0xBD,0xFF,0xFF,0xDE,0xDB, -0x8D,0xF7,0x7E,0xDF,0xB7,0xEF,0x7F,0xFF, 0xF6,0x87,0xFF,0xFF,0xEF,0xFE,0xDE,0xBF, -0xFF,0xFF,0xFF,0xBB,0xEF,0xFD,0xFF,0x7B, 0xDE,0xF7,0x3F,0xFF,0xBF,0xFB,0xDB,0xFF, -0xF2,0xB6,0xFD,0xBD,0x7F,0xE7,0xFF,0xFF, 0xFF,0x6F,0xF7,0xFF,0xFF,0xFF,0xFE,0x77, -0xFF,0xBF,0xF8,0xAF,0xFF,0xDF,0xBF,0xFF, 0xBF,0x7F,0xFB,0xFF,0xFF,0xFF,0xDB,0xFE, -0xFF,0xBF,0xFF,0xFA,0xFF,0xFD,0xFF,0xF6, 0x7F,0xFF,0x9F,0xFF,0xFF,0x3F,0xEF,0xF8, -0xEE,0x7E,0x9F,0xBA,0xFE,0xBF,0x8F,0xEF, 0xFE,0xFE,0xF9,0xFF,0xFA,0x7F,0xFE,0x7E, -0xBF,0xAF,0xFB,0x96,0xFD,0x9F,0xEF,0x5E, 0x65,0xBE,0xEF,0x5B,0xB6,0xFF,0xBE,0xE3, -0xFF,0xB5,0xBF,0xFF,0xFD,0xFF,0x7F,0xFF, 0xEF,0xDF,0xFE,0xFF,0xBF,0xFB,0xFE,0xFF, -0xBF,0xCF,0xFF,0xFF,0xFF,0xFD,0x9B,0xFF, 0xFE,0xFB,0xFE,0xDF,0xFF,0x7F,0xFF,0xF7, -0xFE,0xFF,0xDF,0xFB,0xFB,0xFE,0xFF,0xFF, 0xFF,0xFF,0xFF,0xB7,0xFE,0xFA,0xFF,0xAB, -0xEF,0xFF,0xFD,0xB5,0x7B,0x7F,0xFB,0xF7, 0xFD,0xFF,0xFF,0xDD,0xFF,0xEF,0x8F,0xFF, -0x2F,0xFF,0xFB,0x7C,0xFF,0x3F,0xDF,0x73, 0xEB,0xFE,0x3F,0xFF,0xEF,0xFB,0xFE,0xFF, -0xEF,0xFD,0xFF,0xBF,0xFD,0x0F,0xFF,0xFF, 0xFF,0xF5,0xF9,0xFF,0x7F,0xD7,0xFD,0xFF, -0xDF,0xFF,0xF7,0xFB,0xFF,0x7F,0xBF,0xFF, 0xFF,0xF0,0x9F,0xFF,0xFE,0x7F,0x8B,0xE3, -0xF9,0xDE,0x27,0x9B,0xE6,0xBE,0x7F,0x9B, 0xC3,0xF8,0xDE,0x7F,0x9D,0xE7,0xFE,0x7F, -0xFF,0xFF,0x5F,0xD7,0xFF,0xFF,0xFF,0x4F, 0xFB,0xFF,0xFF,0x7F,0xFF,0xAF,0xFF,0x9F, -0x7F,0xFB,0xFF,0xE8,0xFF,0xFF,0xFE,0xBF, 0xAF,0xFF,0xFF,0xFE,0xBF,0xEF,0xF7,0xFF, -0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFF, 0xFC,0xFF,0xFF,0xFD,0x7F,0xFF,0xFF,0xFF, -0xFD,0x3F,0xCF,0xFF,0xFF,0xFF,0xFF,0xF7, 0xFF,0xFD,0x7F,0xFF,0xFF,0x93,0xFF,0xFF, -0x7A,0xDF,0xF7,0xFF,0xFF,0x7B,0x7F,0xB7, 0xEF,0xFF,0xFF,0xFD,0xBF,0xFD,0xFB,0xFF, -0xF7,0xFF,0xD7,0xFF,0xFF,0xFF,0xFC,0x9F, 0x6F,0xCB,0xFF,0xF4,0xBB,0xDF,0xD6,0xFD, -0xBF,0x2F,0xD3,0xF7,0xFF,0xDF,0xFF,0xCF, 0xFF,0xFA,0xBE,0xBD,0xAF,0x6A,0xDA,0xBE, -0xBB,0xAB,0x3A,0xBE,0x2D,0xAE,0xEB,0xDA, 0xF6,0x3F,0xAD,0xF5,0xDD,0xFF,0xCF,0xF1, -0xFF,0xF9,0x7F,0xFF,0x73,0xFE,0xFF,0xCF, 0xC3,0xF4,0xF7,0x2F,0xF3,0xFF,0xFC,0xFF, -0x7C,0x1F,0xFF,0x3F,0x4F,0xFF,0x7E,0xFF, 0xEF,0xBD,0xF6,0xFE,0xFF,0x2B,0xEF,0xDC, -0xFB,0xFD,0xFF,0xFB,0xFF,0xEA,0x7B,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFB,0xF7,0xDF,0xFF, -0xE3,0x7D,0xFF,0xB7,0xFF,0xBF,0xFF,0xFF, 0xDF,0xFF,0xF8,0xFF,0xBF,0xFF,0xBF,0xEB, -0xE7,0xFA,0xFE,0x3D,0xBF,0xE9,0xFC,0xBF, 0xFF,0xFA,0xFB,0xFE,0xFF,0xFF,0xFF,0xD9, -0xFF,0xFF,0xFF,0xF6,0x7F,0xFF,0xF6,0x7D, 0xFF,0xDF,0xCF,0xFD,0xBF,0xFB,0xEF,0x7E, -0xFF,0x7F,0xFF,0xFF,0xD3,0xFF,0xFD,0xFB, 0xFF,0xFB,0xFF,0xFF,0xFF,0xEF,0xFF,0xBF, -0xFE,0xFF,0xF7,0xEF,0xFF,0xFF,0xFF,0xFB, 0xFF,0x87,0xFF,0xFD,0xFF,0xFF,0xFF,0xFF, -0x7B,0xFE,0xFF,0xFE,0x3B,0xF7,0xF7,0xFF, 0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0xFF, -0xFF,0xFF,0xFF,0xFB,0xFF,0xFF,0xFF,0xF7, 0xFF,0xFF,0xAD,0xFF,0xFE,0xF7,0xFF,0xFF, -0x5F,0xFF,0xFF,0xDF,0xFF,0xFD,0xFF,0xF5, 0xFF,0xDF,0xFF,0xBD,0xFF,0xE9,0xFF,0xC7, -0xF3,0xFF,0xFF,0xF7,0xFF,0xF3,0xFF,0xF8, 0x3B,0xFF,0xFF,0x7B,0xDF,0xBF,0xFB,0xEF, -0xFB,0xFF,0xFB,0xF7,0xF7,0xBB,0xFF,0xFF, 0xFF,0xFF,0xFB,0xFF,0xFE,0x7F,0xF3,0x7F, -0x5E,0xB7,0xBF,0xFD,0x7F,0xFF,0xF9,0x7F, 0xFB,0xFF,0xEB,0xFD,0x7F,0x7F,0xFF,0xEF, -0xFB,0xE0,0x3F,0xFE,0xBF,0xBF,0xDF,0xFF, 0x7E,0xFF,0xF7,0xFF,0xFF,0xFE,0xBF,0xFF, -0xDB,0x78,0xFF,0xFF,0xFF,0xEE,0xA1,0xBF, 0xF5,0xDE,0xFB,0xF7,0xFF,0xFB,0xFF,0xFF, -0xFF,0xFF,0xFB,0xFF,0xFF,0xD7,0xFF,0xFF, 0xFF,0xFF,0xEF,0xF0,0xFF,0xFF,0xFF,0xF3, -0xF7,0xFF,0xEF,0xFF,0xE7,0xCF,0xFF,0xFB, 0xFF,0xEF,0xFF,0xFF,0x9F,0x9F,0xEF,0xFC, -0x16,0xBF,0xFE,0xF3,0xE4,0xFF,0xFF,0xC6, 0xFF,0xE7,0xFF,0xFF,0xFD,0xFF,0xBF,0xFF, -0xFF,0x3F,0xFF,0xBF,0xD6,0xAF,0x7F,0xFE, 0x6B,0x7E,0x7F,0xFF,0xAF,0xFF,0xFF,0xBF, -0xFF,0x5F,0xFF,0xFE,0xFF,0xFF,0xFE,0xFF, 0xFF,0xBD,0xDB,0xFF,0xFE,0x5F,0xF2,0xFF, -0xFF,0x5F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xEF,0x7F,0xFF,0xFF,0xFF,0xFF,0xDE,0xBF, -0xFF,0xFF,0xEF,0xFB,0x77,0xFE,0xBD,0x7F, 0x5F,0xFF,0xFF,0xFF,0xDF,0x6F,0xED,0xFF, -0xFD,0xFF,0x7F,0xFD,0x6F,0xFF,0xFF,0x77, 0xDA,0xCF,0xFD,0x5F,0xFF,0xBF,0xFF,0xFF, -0xDF,0x7F,0xFF,0xFB,0xFF,0xFF,0xFF,0xFF, 0x66,0x7F,0xFF,0xFE,0xBF,0xE7,0xBF,0xFA, -0xFF,0xFE,0xFF,0xFF,0xFF,0xDF,0xFF,0x59, 0xEF,0xFF,0xEF,0xFB,0x7F,0x89,0xFF,0xFF, -0xE9,0xFF,0x6F,0xFF,0xF5,0xFF,0xFF,0xFF, 0xFF,0xFF,0x7F,0xF2,0xF7,0xFF,0xFF,0xEF, -0xF8,0x7F,0xFB,0xFF,0xFD,0xFF,0xFF,0xD9, 0xFF,0xEF,0xBB,0xFF,0xFF,0xFF,0xBF,0xEF, -0xDE,0xFF,0xFF,0x9F,0x7F,0xDF,0xFF,0xF7, 0xFF,0xFF,0xFF,0xFF,0xDF,0xFF,0xFF,0xAF, -0xFF,0xFF,0xF7,0x3F,0xEB,0x9F,0xFE,0x7F, 0x9E,0x7F,0x9F,0xFE,0x87,0xFF,0xED,0xDB, -0x56,0xFF,0xBF,0xAF,0x0B,0xD2,0xFF,0xEF, 0xDB,0x6E,0x7D,0xBD,0x6F,0xF8,0xFE,0x3F, -0xFA,0x5B,0xFF,0xFD,0xBF,0xEF,0xFF,0xBF, 0x6F,0xDB,0xE6,0xFF,0xFF,0x3F,0xFF,0xDF, -0xFE,0xFF,0xFF,0xFF,0xFF,0xDA,0x3F,0xFF, 0xFB,0xFE,0xFE,0xFF,0xFF,0xDF,0xF7,0xBD, -0xFF,0xFD,0xFF,0xFE,0xFF,0xFB,0xFF,0xFF, 0xFF,0xFF,0xF1,0x5F,0xFD,0x9F,0xDF,0xFD, -0xFF,0xFD,0x7F,0xFF,0xFF,0xFF,0xFF,0x76, 0xFA,0xFF,0xFF,0x7F,0xE3,0xF8,0xFF,0xAE, -0xFF,0xFB,0x7E,0x9D,0x73,0xFF,0xFA,0x7F, 0xDF,0xFF,0xFF,0x7F,0xFF,0xFB,0xCD,0xFF, -0x7F,0xEF,0xFB,0xFF,0xFD,0xFF,0xF7,0x7F, 0x7F,0xEF,0xFF,0xED,0xFF,0xFF,0xFF,0xB5, -0xFF,0xBF,0xFF,0xBF,0xFD,0xEF,0xDB,0xF7, 0xFF,0x93,0xFF,0xEF,0xE2,0xF9,0xBE,0x7F, -0x8B,0xE7,0xF9,0xFE,0x6B,0xE7,0xF9,0xFE, 0x7F,0x9F,0xE7,0xF9,0xFE,0x7F,0x47,0xFF, -0xFF,0xFD,0xFF,0x9F,0xFF,0xD7,0xFF,0xFF, 0xFF,0xFF,0xF5,0xFF,0x9F,0xFF,0xF7,0xFE, -0xFF,0xBF,0xFE,0x6F,0xFF,0xFF,0xFB,0xFF, 0xFF,0xFF,0xAF,0xFF,0xFF,0xFF,0x7F,0xFB, -0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, 0xDF,0xFF,0xFF,0xF7,0xFF,0xFF,0xFF,0xDF, -0xFF,0xFF,0xFF,0x5F,0xFF,0xFF,0xFF,0xFF, 0x5F,0xFB,0xFE,0xFF,0xF8,0x37,0xFF,0xFF, -0xEF,0xFF,0x7F,0xFE,0xBF,0xFF,0xFF,0xFE, 0xBF,0xFF,0xFF,0x7F,0xFF,0xBF,0xFD,0xFF, -0x7F,0xFA,0x7F,0xFF,0xFF,0x6F,0xFF,0xFF, 0x7D,0xFF,0xCF,0xFF,0xFF,0xFF,0x4F,0xFF, -0xF2,0xFF,0xFF,0xFF,0xFF,0xFF,0xFA,0xBF, 0xFF,0xAE,0xEB,0xFA,0xFE,0xBB,0xAD,0xEB, -0xFA,0xF7,0xAF,0x6B,0xFA,0xF6,0xBF,0x25, 0xE9,0xF2,0x7F,0x45,0xFF,0xFF,0xFD,0xF7, -0xF7,0xBF,0xFF,0xDF,0xFF,0xFF,0xBF,0xFB, 0xFF,0xDF,0xF3,0xFF,0xF7,0x3F,0xCF,0xFF, -0xA1,0xFF,0xFF,0xBF,0xE7,0xFF,0xFF,0x7F, 0xFF,0x3D,0xFF,0xFF,0xFF,0xF7,0xFF,0x2F, -0xFF,0xFB,0xF5,0x7F,0xFE,0x57,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7, -0x3F,0xFF,0xFE,0xFF,0xFF,0xFF,0xFD,0xFE, 0xF7,0xEE,0xAF,0xFE,0xEE,0xE7,0xFA,0xFF, -0xFE,0x9D,0xF9,0x5E,0xFE,0xFF,0xEB,0xFF, 0xFF,0xDF,0xA7,0xFF,0xFF,0xFF,0xFC,0xDB, -0xFF,0xFF,0xFF,0x7E,0xFB,0xFF,0xFF,0xEF, 0xFB,0xFD,0xFF,0xDB,0xFF,0xFF,0xFF,0xEF, -0xFF,0xFF,0xFF,0xFD,0xBF,0xFE,0xBF,0xFF, 0x6F,0x7F,0xFF,0xF7,0xFF,0xFF,0xF9,0xFF, -0xF7,0xFF,0xBF,0xDE,0xF7,0xFF,0xFF,0xFF, 0xFA,0x7F,0xFD,0xBF,0x5F,0xFF,0xFF,0xBF, -0xFF,0xED,0xFF,0xF7,0xBF,0xFF,0xFF,0xEF, 0xFF,0xDF,0xFF,0xFF,0xFF,0xE6,0xFF,0xFB, -0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEB,0xFF, -0xFD,0xFF,0xF5,0xFF,0xF6,0x7F,0xDF,0xBD, 0xCF,0xFF,0xFF,0xFF,0xFF,0xDF,0xFF,0xFF, -0xFF,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,0xE3, 0xFF,0xEE,0xBF,0xFF,0x7D,0xEF,0xFE,0xFF, -0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,0xFF,0xFE, 0xFF,0xFF,0xFF,0xFF,0xE7,0xFF,0xB5,0xAE, -0xFF,0xFF,0xB6,0xFE,0xBF,0xFF,0xFF,0xBF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0x27,0xFF,0xEF,0xFE,0x7F,0xDF,0xFF, 0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFD,0xFF,0xF7,0xF9,0x9F,0xFF, 0x5F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F, -0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0x0F,0xFF,0xE7,0xBF,0xFE, -0xFF,0xBF,0xFF,0xFF,0xFF,0xFF,0xFC,0xBF, 0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xC4, -0x6B,0xFF,0x29,0x1F,0xFB,0xAF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xEF,0x1B,0xFE,0xFF,0xFC, -0x6F,0xFF,0xFF,0xFD,0x6A,0xF7,0xD7,0xF5, 0xBF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFE,0xBF,0xFF,0xFF,0xFA,0xFF,0xFF,0xF7, 0xFB,0xDD,0xBF,0xFF,0xE7,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,0x7F,0xFF, 0xFF,0xF5,0xFF,0xFF,0xF7,0xFD,0xB3,0xEF, -0xFD,0x7E,0x5D,0xFF,0xFD,0xFF,0xFF,0xFF, 0xFD,0x7F,0xD2,0xF5,0xFB,0x7E,0xCB,0xB7, -0xFF,0xFF,0xFF,0xC6,0xFF,0xFD,0xEE,0x63, 0xFF,0xFF,0xFF,0xFF,0xFF,0xF6,0xFD,0x65, -0x5B,0xDF,0xFF,0xD5,0xFF,0xFF,0xFF,0xF6, 0xE7,0xBF,0xF7,0xA9,0xFF,0xFF,0xED,0xFF, -0xFF,0xFF,0xFF,0xFF,0xEB,0xFF,0xFF,0xFF, 0xAF,0xFF,0xFF,0xFF,0xF8,0x1B,0xFF,0xE3, -0xD0,0xBF,0xFF,0xE1,0xFF,0xFF,0xFF,0xFF, 0xFF,0xD7,0xFF,0xFF,0xFF,0x5F,0xFF,0xFF, -0xFF,0xFF,0xAF,0xFF,0xDB,0x76,0xBF,0xFF, 0x7F,0xFF,0xBF,0xEF,0xFE,0xFF,0xBF,0xEF, -0xFB,0xFE,0xFF,0xFF,0xFF,0xBF,0xF2,0x7F, 0xFF,0x9F,0xFE,0xBD,0xFE,0x7F,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xF7,0x3F,0xEC,0x7F,0xF6,0x95,0xBB, -0xEF,0xF8,0xFE,0xFC,0xBF,0x2F,0xDA,0xFC, 0xBF,0x2F,0xCB,0xF2,0xFC,0xBF,0xEF,0xFF, -0xA9,0xBF,0xCF,0xFB,0xFF,0xFF,0xFF,0xFE, 0xDD,0xB7,0x6D,0xF6,0xD9,0xB6,0x6D,0x9B, -0x76,0xD9,0xBF,0xFB,0xFD,0xA3,0xFF,0xBF, 0xEF,0xFF,0xEF,0xFF,0xFF,0xFF,0x7F,0xDF, -0xFD,0xEF,0x7B,0xDE,0xF7,0xFD,0xEF,0x7F, 0xFF,0xFF,0x05,0xFF,0xFA,0xFE,0x7F,0xEF, -0xE3,0xFF,0xFF,0xFD,0x7F,0xFF,0xFF,0xFF, 0xFF,0x5F,0xFF,0xFF,0xFD,0x7F,0xFB,0xAF, -0xFF,0x63,0xC8,0xFF,0xBF,0xEF,0xFF,0xFF, 0xFA,0x7F,0xFF,0xFF,0xFF,0xFE,0x9F,0xF7, -0xFF,0xFA,0xBF,0xFE,0x9F,0xFB,0x7F,0xFF, 0xFF,0xEF,0xD7,0xFF,0xFF,0xF5,0xFF,0xFF, -0xFF,0xFF,0xFD,0x7F,0xFF,0xFF,0xBF,0xFF, 0xF9,0xBF,0xFF,0xBE,0x27,0x9F,0xE7,0xF9, -0xFE,0x7F,0x8B,0xE7,0xFE,0x7F,0x9F,0xE2, 0xF9,0xFE,0x7F,0x9F,0xE7,0xF1,0x7F,0xFF, -0xFF,0xFF,0xFB,0xFE,0xFF,0xFF,0xFF,0xD7, 0xFF,0xFF,0xFF,0xFF,0xF5,0xFF,0xFF,0xFF, -0xD7,0xFF,0xFA,0xFF,0xFE,0xFF,0xFF,0xFF, 0xFD,0xFF,0xFF,0xFF,0xAF,0xF7,0xFF,0xFF, -0xFF,0xEB,0xFF,0xFF,0xFF,0xAF,0xFF,0xC4, 0xFF,0xF7,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF, -0xFF,0x5F,0xFF,0xFF,0xFF,0xFF,0xD7,0xFF, 0xFF,0xFF,0xFF,0xFF,0xEB,0xFF,0xFB,0x7A, -0xDF,0xF7,0xFD,0xFF,0xFF,0xFE,0xBF,0xFF, 0xFF,0x7F,0xFF,0xAF,0xFF,0xFF,0xFF,0xF7, -0xEF,0xE3,0xFF,0xDD,0xD2,0xFF,0xDF,0xFF, 0xFF,0xF2,0xFC,0xBF,0xCB,0xF6,0xFD,0xBF, -0x2F,0xCB,0xFF,0x7F,0xDF,0xDE,0xAF,0xFF, 0xDA,0xEE,0xBF,0xAF,0xE9,0xFA,0xF4,0xBD, -0xAF,0x5A,0xAE,0xBB,0xAB,0x6B,0xDA,0xDE, 0xBF,0xAD,0xD7,0x5E,0xFF,0xFF,0xBF,0xFC, -0xFF,0xDF,0xFD,0xFF,0xFF,0xFF,0xFF,0xDF, 0xF7,0xFF,0xFF,0xFF,0xFF,0xFD,0xFF,0xFA, -0x1F,0xFF,0xFE,0xFB,0xEF,0xBF,0xFD,0xFF, 0xFD,0xBD,0x77,0xFF,0xFF,0xFF,0xFF,0x9D, -0xEF,0xFF,0xFF,0xFF,0xEF,0x7D,0xFF,0xFB, 0xFE,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF7, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEE, 0xBF,0xE4,0xFB,0xFF,0xFE,0x3F,0xFE,0xFF, -0xFF,0xFF,0xFF,0xAF,0xEA,0xFE,0xBF,0xAF, 0xEB,0xFA,0xFE,0xFF,0xFF,0xFF,0x55,0xF6, -0xFF,0xFE,0xF7,0xFF,0x7F,0xFF,0xEB,0xF7, 0x5F,0xC5,0xFD,0x7F,0x5F,0xD7,0xF5,0xFF, -0x6F,0xFB,0xFF,0x8A,0xFF,0xFF,0xFF,0xFF, 0xEB,0xFF,0xFF,0xFF,0xFF,0xFB,0xBF,0xBF, -0xEF,0xFB,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF, 0x77,0xDF,0xFB,0xFF,0xFD,0x7F,0xEF,0xFF, -0xFF,0xFF,0xBF,0x7F,0xFF,0xDF,0xBF,0xFF, 0xFB,0xFF,0xFF,0xFF,0xFE,0xEF,0xDF,0xFF, -0xFE,0xFF,0x9F,0xEF,0x7D,0xFF,0xF7,0xFF, 0x7F,0xFF,0xFF,0xDF,0xF7,0xFD,0xFF,0xEF, -0xDF,0xFF,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0xFF,0xFF,0xFB, -0xFD,0xFF,0xBF,0xDF,0xD1,0xFF,0xF8,0x3B, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0x7E,0xDB,0xFD,0xFF,0x77,0xDB,0xB7,0x7D, 0xBF,0xFB,0xFF,0xF8,0x7F,0xED,0x7B,0x5E, -0xFF,0xFE,0xFF,0xFF,0x4F,0xD7,0xFD,0x7F, 0xDF,0xD7,0xF5,0xFF,0x7F,0xFF,0xFF,0xFF, -0xF2,0x3F,0xFE,0xFF,0xBF,0xFF,0xFF,0xFF, 0xFF,0xBF,0xEF,0xFE,0xFF,0x3B,0xEE,0xFF, -0xFC,0xEF,0xFF,0xFF,0xFF,0x85,0xFF,0xFD, 0xFE,0xFF,0xF5,0xFF,0xFF,0xFE,0xFF,0xDF, -0xFB,0xFF,0x5F,0xBF,0xFF,0xFD,0xFF,0xFF, 0xFF,0xFF,0xA8,0xFF,0xFF,0x9F,0x9E,0xFF, -0xFF,0xFF,0x7F,0xF3,0xFF,0xFF,0xCF,0xFF, 0xF7,0xFD,0xFF,0x7F,0xFF,0xFF,0xFC,0x16, -0xBF,0xCF,0xA3,0xE5,0xEF,0x7F,0xFF,0xF3, 0xE4,0xFF,0xCF,0x93,0xFC,0xFF,0x3F,0xCF, -0xFF,0xFF,0xFF,0xD6,0x0F,0x7D,0xBF,0x6E, 0xFB,0xF4,0xFC,0xAF,0x6D,0xDB,0x77,0xB7, -0x6D,0xDB,0xF6,0xFD,0xBF,0xFF,0xFF,0xFF, 0xBF,0x9B,0xFA,0xDE,0xB7,0xB7,0xED,0xF9, -0x7E,0xB7,0xAC,0xEB,0xD6,0xB3,0xAD,0xEB, 0x7A,0xDF,0xFF,0xFF,0xFF,0xD8,0xBF,0xFF, -0xB7,0xED,0x9F,0x6F,0xDD,0xF7,0x68,0xDB, 0x37,0xB3,0x6C,0xDB,0x36,0xCD,0xB3,0x7F, -0xFF,0x7F,0xF5,0x6F,0xFD,0xEF,0x79,0x3D, 0xF7,0x93,0xE4,0x7A,0x9E,0xAD,0xEA,0x7A, -0x9E,0xF7,0xBD,0xEF,0xFF,0xFF,0xFF,0x76, 0x7F,0xFB,0xC6,0xFF,0xBB,0xEF,0xDA,0xFE, -0xFD,0xBF,0xFB,0xFE,0xFF,0xBF,0xEF,0xFB, 0xFF,0xFF,0xFB,0xFF,0xA5,0xFF,0xFD,0xAB, -0x6F,0x78,0xDE,0x17,0x8F,0x79,0xDF,0xFD, 0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0xFF,0xFB, -0xFF,0xFB,0xFF,0xEF,0xFB,0xEF,0xFB,0xFE, 0xFF,0xBB,0xDA,0xF3,0xEF,0x3B,0xCE,0xF3, -0xBC,0xEF,0x3F,0xCF,0xDF,0xFF,0xB7,0xFF, 0xFF,0xFF,0xCF,0x73,0xFF,0xBF,0xEF,0xFF, -0xF3,0xFF,0x3F,0xCF,0xF3,0xFC,0xFF,0x3D, 0xCF,0x9F,0xFE,0x07,0xFF,0xAF,0xEB,0xFE, -0xFD,0xBF,0xEF,0xEB,0xFA,0xFF,0xAF,0xEB, 0xFA,0xFE,0xBF,0xAF,0xFB,0xFE,0x3F,0xFB, -0x9B,0xFF,0x7F,0xDF,0xFF,0xF3,0xFE,0xFF, 0xDE,0xF7,0xBF,0x7B,0xDE,0xF7,0xBD,0xEF, -0x7B,0xFE,0xFF,0xFF,0xDF,0x3F,0xFE,0xFF, 0xB7,0xFF,0xEF,0xF7,0xFF,0xBF,0xED,0xFE, -0xDF,0xB7,0xED,0xFB,0x7E,0xDF,0xFF,0xFF, 0xFF,0xFD,0x5F,0xEF,0xEB,0xFA,0xFE,0xF5, -0xBF,0x6F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFE,0xF8,0xFF,0xA8,0xFF, -0xFF,0xBF,0xEF,0xFB,0x6A,0xFB,0xB7,0xEF, 0xFB,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xBF, -0xEF,0xFB,0xFF,0xE0,0xFF,0xFF,0xFD,0x7F, 0x5C,0xD7,0x7D,0xDF,0xF3,0x5C,0xF5,0xCD, -0x73,0x5E,0xD7,0xB5,0xFD,0x7F,0xEF,0xFF, 0xDB,0xFF,0xFF,0xE2,0xF8,0xBE,0x2F,0x8F, -0xE7,0xF8,0xBE,0x6B,0xE2,0xF8,0xBE,0x2F, 0x8B,0xE2,0xF9,0xFE,0x7F,0xE7,0xFF,0xD7, -0xF5,0xFD,0x7F,0xFF,0xF7,0xF5,0xFD,0x7F, 0xD7,0xF5,0xFD,0x7F,0x5F,0xD7,0xF5,0xFF, -0xFF,0xFF,0x8F,0xFF,0xAF,0xEB,0xFA,0xFF, 0xFF,0xBF,0xEB,0xFA,0xFF,0x2F,0xEB,0xFA, -0xFE,0xBF,0xAF,0xEB,0xFF,0xFF,0xFE,0x5F, 0xFF,0x5F,0xFF,0xFF,0xFD,0xFF,0xFF,0xD7, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xBF,0xFE,0xB7,0xFD, -0xFF,0x7E,0xDF,0xF7,0xAD,0xFF,0x7F,0xF7, 0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0x7F, -0xF6,0x7F,0xFF,0xFF,0xFF,0xDB,0xF6,0xFC, 0xAF,0xFF,0xFF,0xFF,0xFF,0xF7,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xEC,0xBF,0xFF, 0xAF,0xEB,0xFA,0xF6,0xAB,0x8F,0xEB,0xFA, -0xF7,0xA5,0xEB,0xFA,0xBE,0xBF,0xAF,0xEB, 0xFA,0xFF,0x6D,0xFF,0xFF,0x7F,0xDF,0x33, -0xDD,0xFF,0x7F,0xFE,0xF7,0xFC,0x7F,0xFB, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xA9, -0xFF,0xFD,0xFF,0xFF,0xFE,0xFF,0xFF,0xDF, 0xFF,0xFF,0xEF,0xEF,0xFD,0xFF,0x7F,0xFF, -0xFF,0xFF,0xFF,0xFE,0xA7,0xFF,0xFF,0xFF, 0x77,0xDF,0xF7,0xFD,0x9F,0x7F,0xFE,0x77, -0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xAF,0xBF,0xAF,0xFF,0xF9,0xBE,0xBF, -0x8F,0xFB,0xFE,0xFE,0xEF,0xFB,0xFE,0xFF, 0xBF,0xEF,0xFB,0xFF,0xFF,0xFD,0xDF,0x6F, -0xEF,0xFF,0x7F,0xFF,0xBF,0xBF,0xDF,0xFF, 0xFC,0xFF,0xDF,0xF7,0xFD,0xEF,0x7F,0xDF, -0xFF,0xFF,0xFF,0x3F,0xF6,0xFF,0xCF,0xFF, 0xDB,0xFB,0xF7,0xFF,0xEB,0x7A,0xFF,0xFF, -0xFF,0xBF,0xEF,0xFB,0xFF,0xFF,0xFF,0xFE, 0x6D,0xFD,0xFF,0x5F,0xFB,0xFF,0xFF,0xF7, -0xFF,0x5F,0xF5,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xF8,0xFF,0xFB,0xFF, -0xFF,0xFD,0xFF,0xFF,0xFF,0xFF,0xE7,0xF6, 0xBF,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF,0xFF, -0xFF,0xC9,0xFF,0xFF,0xFF,0xBD,0xFF,0xBF, 0xAF,0xEF,0xEF,0x3F,0xD1,0xFC,0x7F,0xFB, -0xC7,0xFF,0xFF,0xFF,0xFF,0xFF,0xE3,0xFF, 0xFF,0xFF,0xFF,0xFD,0xFF,0xFF,0x77,0xFF, -0xDF,0xB7,0xFD,0xF7,0xFD,0xF7,0xFF,0xFF, 0xFF,0xFF,0xFF,0x57,0xFF,0xF7,0xA5,0xFD, -0x3F,0xDF,0xBF,0xBF,0xFE,0x7F,0xFF,0xFF, 0xFF,0xDF,0xFA,0xFD,0xFF,0xFF,0xFF,0xFE, -0x87,0xFF,0xE9,0xFF,0xFE,0xEF,0xBF,0xEF, 0xFE,0xFE,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFA,0x9F,0xFF,0x3F, 0xFF,0xFD,0xFD,0x57,0xDF,0xFD,0xF3,0xFF, -0xDF,0xFD,0xFF,0x5F,0xDF,0xF5,0xFD,0xFF, 0xFF,0xF9,0x8F,0xFF,0xFF,0xFF,0xEE,0x7F, -0xFF,0xFF,0xBF,0x5E,0xFE,0xEC,0xFB,0x3F, 0x7F,0x9F,0xEF,0xF9,0xFF,0xFF,0xCD,0x6B, -0xFF,0xFF,0xFF,0xC5,0xF3,0xFC,0xFA,0x38, 0xFF,0xAF,0x3F,0xEE,0x7F,0x9F,0xFF,0xD9, -0xFF,0xFF,0xFD,0x7A,0xF7,0xFF,0xF3,0xFF, 0xAF,0x6F,0xDB,0xF2,0xB9,0xE9,0xFB,0xFF, -0xFF,0xFF,0xFE,0xFF,0xFF,0xEF,0xFF,0xFB, 0xC5,0xBF,0xFF,0xEF,0xFF,0x5E,0xB7,0xAD, -0xCD,0x79,0x7C,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0x93,0xFF,0xEF, -0xEA,0xFE,0xBF,0xEF,0x5B,0xD2,0xCD,0xF5, 0x6D,0x77,0xDF,0xF7,0xFD,0xFF,0x7F,0xDF, -0xFF,0xFF,0x66,0xFF,0xD5,0x65,0x7D,0x5F, 0x75,0x9D,0x65,0x7F,0xD6,0xFB,0x4F,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF6,0xC7, 0xFF,0xBF,0xEF,0xFA,0xFE,0xFF,0xBF,0xEB, -0xFF,0xDF,0xFF,0x7E,0xFF,0xFF,0xEF,0xFD, 0x7E,0xD7,0xFF,0x78,0xDF,0xFF,0x5F,0xDF, -0xF5,0xBF,0x7F,0xDF,0xC5,0xFF,0x3F,0xF6, 0x7E,0xFF,0x0F,0xEF,0xF2,0x3E,0xBF,0xFF, -0xFB,0x3F,0xFF,0xFB,0x7F,0xFF,0xB3,0xFE, 0xFB,0xF6,0xFD,0xFF,0xDA,0xF7,0xFD,0xFF, -0x7F,0xDF,0xF7,0xBF,0xFF,0xFA,0x7F,0xFF, 0xFF,0xFF,0xFF,0x9F,0xFF,0xF3,0xDC,0xF9, -0xBF,0xCE,0xE7,0xF9,0xFE,0x7F,0x9F,0xE7, 0xFF,0xFF,0xE2,0x7F,0xFE,0xFF,0xBF,0xEF, -0xEB,0xFA,0xFF,0x9F,0x67,0x1E,0xFF,0x8F, 0xE7,0xF8,0xFE,0x7F,0x8F,0xEF,0xFF,0xBD, -0xBF,0xFF,0xFB,0xFF,0xFF,0xDF,0xF7,0xFF, 0xFC,0xFF,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFD,0xB3,0xFF,0xFF,0xEF, 0xFF,0xFF,0xBF,0xED,0xFF,0xFB,0xEE,0xFE, -0xFF,0xFF,0xEF,0xFF,0xFE,0xFF,0xFF,0xFF, 0xFF,0xB5,0xFF,0xB7,0xFD,0xFD,0x6E,0xFF, -0xFF,0xFE,0xFD,0x2F,0xD8,0xFE,0xBF,0x8F, 0xEB,0xF9,0xFE,0x3F,0xFF,0xFA,0xCF,0xFF, -0xE7,0xD9,0xFA,0xBF,0xDF,0x77,0xFC,0xFB, 0x3F,0xAB,0xFE,0xFF,0xBF,0xEF,0xFB,0xFE, -0xFF,0xFF,0xEE,0x1F,0xFF,0xDF,0xF7,0xFF, 0xFF,0xFF,0x5F,0x97,0x35,0xBF,0x5E,0xFE, -0xBF,0xEF,0xFF,0xF7,0xFD,0xFF,0xFF,0xFA, 0xBF,0xFF,0xBE,0x6F,0x9F,0xE7,0xF8,0xBE, -0x2F,0x8B,0x66,0x94,0x7D,0x9D,0xE7,0xF9, 0xFE,0x7F,0x9F,0xE7,0xF1,0x7F,0xFF,0xFF, -0xFF,0xF7,0xF5,0xFD,0x7F,0x5F,0xFB,0xFD, 0x9E,0xFF,0xFB,0xFE,0xFF,0xFF,0xEF,0xFF, -0xFF,0xA0,0xFF,0xFF,0xFF,0xBF,0xEF,0xEB, 0xFA,0xFE,0xBF,0xB7,0xF7,0xF7,0xFF,0xFF, -0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0xDD,0xFF, 0xFD,0xFF,0xFF,0xFF,0xD7,0xFF,0xFF,0xFF, -0x7F,0xF5,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF, 0xBF,0xFF,0xFF,0xAB,0xFE,0xFB,0xFE,0xFF, -0xF7,0xAF,0xFF,0xFF,0xDE,0xF7,0xEB,0x5F, 0xDF,0xF7,0xFD,0xFF,0x7F,0xDF,0xFF,0xFF, -0xB3,0xFF,0xC9,0xFE,0xFF,0xFF,0xFF,0xFF, 0xD6,0xFF,0xFF,0xCB,0xFF,0xFF,0xDF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFC,0x8F,0xFF,0xBA, 0xBE,0xBF,0xAF,0xEB,0x78,0xFE,0xB7,0xAD, -0x3A,0xFE,0xB7,0xAF,0xEB,0x7A,0xFE,0xBF, 0xAF,0xFF,0x9F,0xFF,0xFF,0xDF,0xFC,0xFF, -0xFF,0xFE,0xC3,0xFE,0xFF,0xFF,0x33,0xFC, 0xFF,0xBF,0xDF,0xF3,0xFF,0xFF,0xBB,0x9F, -0xFF,0xFF,0xFF,0xEB,0xDF,0xFF,0xFF,0xAF, 0xF7,0x6F,0xF9,0xBF,0xEF,0xFD,0xFF,0xFF, -0xFF,0xFF,0xFF,0xE3,0x7F,0xFF,0xFF,0xFF, 0xFB,0xFF,0xFF,0xBF,0xFD,0xFB,0xF7,0xFF, -0xDF,0xF7,0xFF,0xFE,0xEF,0x5F,0xBD,0xFF, 0xFA,0xFF,0xF8,0xFF,0xBF,0xAF,0xFB,0xFE, -0xFE,0x3F,0xEF,0xE8,0xFF,0xDF,0xF3,0xFD, 0xFF,0xFF,0xFF,0xFF,0xFF,0xED,0xFF,0xFB, -0xFD,0xFF,0xAF,0xFF,0xFF,0xFE,0xFE,0xBF, 0xDB,0xFF,0xFF,0xFF,0xBF,0xFF,0xDF,0xFF, -0xFD,0xFF,0xCB,0xFF,0xFF,0xFF,0xFF,0xFF, 0xBF,0x6F,0xFF,0x7F,0xB7,0xB3,0xFF,0xFF, -0xDF,0xFF,0xFB,0xEF,0xFF,0xFF,0xFF,0x07, 0xFF,0xFB,0xFF,0xFF,0xFF,0xED,0xFF,0xF5, -0x7C,0xFF,0x7F,0xFE,0xFF,0xFF,0xEF,0xCF, 0xFF,0xFB,0xFF,0xFF,0x2F,0xFF,0xFF,0xFF, -0xFF,0xF3,0xFF,0xFB,0xFF,0xFE,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF, -0xFD,0x1B,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFE,0x7C,0xFF,0xFF,0xFF,0xFF, -0xEF,0xFF,0xFF,0xFF,0xFF,0xFB,0xBF,0x7F, 0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xDB,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFD, 0xFF,0xFF,0xF0,0x7F,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xFF,0xDF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFD,0xBF,0xFE, -0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xEF,0xFE,0xFF,0xBF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xEF,0xFA,0xB5,0xFF,0xFF,0xFF, 0xF7,0xF7,0xFF,0xFF,0xFF,0xFF,0xDF,0xFB, -0xFC,0xFF,0xFF,0xFE,0xFF,0x7F,0xDF,0xBF, 0xFF,0xCB,0xBF,0xF9,0xFE,0x7F,0x9F,0xE7, -0xF9,0xFE,0x7F,0x97,0xE1,0xFE,0x79,0x9F, 0xE7,0xFD,0xFE,0x7F,0xDF,0xFE,0x37,0xFF, -0xFB,0xDE,0xDE,0xBD,0xEF,0xF3,0xFE,0xFB, 0xAF,0xEB,0xFE,0xFF,0xFF,0xCF,0xFF,0xFE, -0xFF,0xBF,0xFF,0x8F,0xFF,0xEF,0xFB,0xFE, 0xFF,0xBF,0xE7,0xF9,0x5E,0x7F,0xEF,0xFB, -0xDA,0xFF,0xBF,0xEF,0xFB,0xFE,0xFF,0xFD, 0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xDF, -0xFF,0xFF,0x7F,0xFF,0xFF,0xF7,0xFB,0x7F, 0xFF,0xFF,0xFF,0xFF,0xFC,0x3F,0xFF,0xBF, -0xEF,0xFB,0xFE,0xFF,0xBF,0xEF,0x7B,0x7F, 0xBF,0xEF,0xFB,0xFE,0xFF,0xB5,0xEF,0xFB, -0xBF,0xFA,0x7F,0xFC,0xFF,0x3F,0xCF,0xF3, 0xFC,0xFF,0x3F,0xCF,0xBC,0xFF,0x3F,0xEF, -0xF3,0xFC,0xFE,0x3F,0xCF,0xFF,0xEE,0xEF, 0xFB,0xFE,0xFF,0xBF,0xEF,0xFB,0x6A,0xD7, -0xB7,0xFB,0xF8,0xFF,0xB7,0xEF,0xBA,0xFE, 0xFF,0xBF,0x7F,0xE9,0xFF,0xF9,0x7E,0x5F, -0x97,0xE5,0xF9,0xFE,0x7F,0xBF,0xF9,0x7E, 0x5F,0x9F,0xE5,0xFB,0xFE,0x5F,0xB7,0xFF, -0xA3,0xFF,0xF7,0xFD,0xFF,0x7F,0xDF,0xF7, 0xFD,0xFF,0x5E,0xF7,0x7D,0xFF,0x77,0xDF, -0xF7,0xFD,0xFF,0x7F,0xFF,0xD7,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFD,0xDF,0xFB,0x7F, -0xFF,0xFF,0xEF,0xFF,0xFE,0xFB,0xFF,0xFF, 0xBF,0xFE,0x8F,0xFF,0xDF,0xF7,0xFD,0xFD, -0x7F,0xDF,0xF7,0xFD,0x3E,0xDF,0xF5,0xBD, 0xFF,0x7F,0xDF,0xF7,0xFD,0xF7,0xFF,0x9F, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFD,0xFF,0xBE,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFD,0x3F,0xFF,0xDF,0xF7, 0xFD,0xFF,0x7F,0xDF,0xF7,0xFD,0xFF,0xCF, -0x77,0xFC,0xFF,0x5F,0xDF,0xF7,0xFD,0xFF, 0xF4,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFD,0xFF,0xFF,0xFF,0xEE,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xED,0xFB,0xFF,0xFF,0xBF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xE9,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFB,0xFF,0xFF,0xFF,0xD3,0xFF,0xFF, -0xBF,0x3F,0xFB,0xFF,0xFF,0xFF,0xFB,0xF3, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0xF7, 0xFF,0xFF,0xFF,0xFF,0x17,0xFF,0xFF,0xFF, -0xDF,0xFF,0xFD,0xFF,0xFF,0xFF,0xFF,0xFF, 0xDF,0xDF,0xFF,0xFD,0xFF,0xFF,0xDF,0xF7, -0xFF,0x4F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFE,0xFF,0xFF,0xFF,0xFD, -0xFF,0xFF,0xFF,0xFF,0xFE,0xFF,0x9F,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF, -0xFD,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0xFF, 0xFF,0xFF,0x7A,0x3F,0xFF,0xFF,0xFF,0xFF, -0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF2, -0x7F,0xFF,0xFB,0xFE,0xFF,0xBF,0xEF,0xF8, 0xFE,0xFF,0xBF,0xFB,0xFE,0xFF,0x8F,0xEC, -0xFB,0xFE,0xFF,0xBF,0xF8,0xF7,0xFE,0xFF, 0xBF,0xEF,0xFB,0xFE,0xFD,0xBF,0xCF,0xEC, -0xFF,0x3F,0xEF,0xDB,0xF8,0xFF,0xBF,0xCF, 0xFF,0xF9,0xFF,0xFF,0xBF,0xFF,0xFB,0xFF, -0xFF,0xFF,0xEF,0xFB,0xDF,0xFF,0xFF,0xFF, 0xFF,0xFF,0xBF,0xFF,0xFF,0xFF,0xBB,0xFF, -0xEF,0xFB,0xFE,0xEF,0xBF,0xEE,0xEB,0xFB, 0xFE,0xFF,0xEF,0xFE,0xEE,0xBF,0xFE,0xEB, -0xFF,0xEF,0xFF,0x17,0xFF,0x7E,0xEB,0xBB, 0xFE,0xBF,0xBE,0xFB,0xEF,0x5B,0xF7,0xBD, -0xFB,0xCF,0xBF,0xBF,0xBB,0xFB,0x7E,0xCC, 0xEF,0xFF - -}; diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c index 8d1f8ee2a533..48f4b92a8f8b 100644 --- a/drivers/media/video/dabusb.c +++ b/drivers/media/video/dabusb.c @@ -38,9 +38,10 @@ #include #include #include +#include +#include #include "dabusb.h" -#include "dabfirmware.h" /* * Version Information @@ -297,7 +298,8 @@ static int dabusb_bulk (pdabusb_t s, pbulk_transfer_t pb) return ret; } /* --------------------------------------------------------------------- */ -static int dabusb_writemem (pdabusb_t s, int pos, unsigned char *data, int len) +static int dabusb_writemem (pdabusb_t s, int pos, const unsigned char *data, + int len) { int ret; unsigned char *transfer_buffer = kmalloc (len, GFP_KERNEL); @@ -324,24 +326,35 @@ static int dabusb_8051_reset (pdabusb_t s, unsigned char reset_bit) static int dabusb_loadmem (pdabusb_t s, const char *fname) { int ret; - PINTEL_HEX_RECORD ptr = firmware; + const struct ihex_binrec *rec; + const struct firmware *fw; dbg("Enter dabusb_loadmem (internal)"); + ret = request_ihex_firmware(&fw, "dabusb/firmware.fw", &s->usbdev->dev); + if (ret) { + err("Failed to load \"dabusb/firmware.fw\": %d\n", ret); + goto out; + } ret = dabusb_8051_reset (s, 1); - while (ptr->Type == 0) { - dbg("dabusb_writemem: %04X %p %d)", ptr->Address, ptr->Data, ptr->Length); + for (rec = (const struct ihex_binrec *)fw->data; rec; + rec = ihex_next_binrec(rec)) { + dbg("dabusb_writemem: %04X %p %d)", be32_to_cpu(rec->addr), + rec->data, be16_to_cpu(rec->len)); - ret = dabusb_writemem (s, ptr->Address, ptr->Data, ptr->Length); + ret = dabusb_writemem(s, be32_to_cpu(rec->addr), rec->data, + be16_to_cpu(rec->len)); if (ret < 0) { - err("dabusb_writemem failed (%d %04X %p %d)", ret, ptr->Address, ptr->Data, ptr->Length); + err("dabusb_writemem failed (%d %04X %p %d)", ret, + be32_to_cpu(rec->addr), rec->data, + be16_to_cpu(rec->len)); break; } - ptr++; } ret = dabusb_8051_reset (s, 0); - + release_firmware(fw); + out: dbg("dabusb_loadmem: exit"); return ret; @@ -376,9 +389,9 @@ static int dabusb_fpga_init (pdabusb_t s, pbulk_transfer_t b) static int dabusb_fpga_download (pdabusb_t s, const char *fname) { pbulk_transfer_t b = kmalloc (sizeof (bulk_transfer_t), GFP_KERNEL); + const struct firmware *fw; unsigned int blen, n; int ret; - unsigned char *buf = bitstream; dbg("Enter dabusb_fpga_download (internal)"); @@ -387,10 +400,16 @@ static int dabusb_fpga_download (pdabusb_t s, const char *fname) return -ENOMEM; } + ret = request_firmware(&fw, "dabusb/bitstream.bin", &s->usbdev->dev); + if (ret) { + err("Failed to load \"dabusb/bitstream.bin\": %d\n", ret); + return ret; + } + b->pipe = 1; ret = dabusb_fpga_clear (s, b); mdelay (10); - blen = buf[73] + (buf[72] << 8); + blen = fw->data[73] + (fw->data[72] << 8); dbg("Bitstream len: %i", blen); @@ -402,7 +421,7 @@ static int dabusb_fpga_download (pdabusb_t s, const char *fname) for (n = 0; n <= blen + 60; n += 60) { // some cclks for startup b->size = 64; - memcpy (b->data + 4, buf + 74 + n, 60); + memcpy (b->data + 4, fw->data + 74 + n, 60); ret = dabusb_bulk (s, b); if (ret < 0) { err("dabusb_bulk failed."); @@ -413,6 +432,7 @@ static int dabusb_fpga_download (pdabusb_t s, const char *fname) ret = dabusb_fpga_init (s, b); kfree (b); + release_firmware(fw); dbg("exit dabusb_fpga_download"); diff --git a/firmware/Makefile b/firmware/Makefile index 8d5465fefd00..331d10cf6518 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -29,6 +29,9 @@ fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \ ess/maestro3_assp_minisrc.fw fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \ yamaha/ds1e_ctrl.fw +fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \ + tigon/tg3_tso5.bin +fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \ emi26/bitstream.fw fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \ diff --git a/firmware/WHENCE b/firmware/WHENCE index d8f6199d087a..878456572926 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -249,3 +249,19 @@ Licence: Allegedly GPLv2+, but no source visible. Marked: Found in hex form in kernel source. -------------------------------------------------------------------------- + +Driver: DABUSB -- Digital Audio Broadcasting (DAB) Receiver for USB and Linux + +File: dabusb/firmware.fw +File: dabusb/bitstream.bin + +Licence: Distributable + + * Copyright (C) 1999 BayCom GmbH + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that redistributions of source + * code retain the above copyright notice and this comment without + * modification. + +-------------------------------------------------------------------------- diff --git a/firmware/dabusb/bitstream.bin.ihex b/firmware/dabusb/bitstream.bin.ihex new file mode 100644 index 000000000000..5021a4b1e63f --- /dev/null +++ b/firmware/dabusb/bitstream.bin.ihex @@ -0,0 +1,761 @@ +:1000000000090FF00FF00FF00FF000000161000D7C +:1000100064616275736274722E6E63640062000BB9 +:10002000733130786C76713130300063000B3139C8 +:1000300039392F30392F32340064000931303A34E5 +:10004000323A3436006500002EC0FF20175F9F5BF8 +:10005000FEFBBBB7BBBBFBBFAFEFFBDFB7FBFB7F61 +:10006000BFB7EFF2FFFBFEFFFFEFFFFEFFBFFFFF9B +:10007000FFFFAFFFFAFFFFFFC9FFFFFFDFFFFFFF3B +:10008000FFFFFFFFFFFFFFFFFFFFFFFBFFA3FFFBE4 +:10009000FEFFBFEFE3FEFFBFE3FEFFBF6FFBF6FF18 +:1000A000BFFF47FFFF9FEEF9FECF9FEFFBCF9BEE19 +:1000B000F8FEEF8FEEFBFE0BFFFFFFFFFFFFFFFFE2 +:1000C000FFFFBFFFFFFBFFFFBFFFFFFC17FFFFFFAF +:1000D000FFFFFF7FFFFFFF7FFFFFFBFFFF7FFFFFB4 +:1000E000FC3FFFFFFFFFFFFFFFFFFFFBFFFFFFFFE7 +:1000F000FFFFFFFFFFFE5FFFFFFDFFFFDBFFFDFFD9 +:1001000077FFFDFFFFDFFEFDFFFFF2FFFFFFFFFFB9 +:10011000FFFDFFFFFFFDFFFFFFFFFFFFFFFFFFE111 +:100120007FFFFFFFFFFFFFFFFFFFFFFFFF3FFFFF1F +:10013000FFFFFFFFE3FFFFFFFFFFFFFFFFFFFFBF2B +:10014000FFFEFFFFFFFFFFFFFF67FFFFFFFFFFFF58 +:100150007FFFFFFF7FFFFFFFFFFFDFFFFFFF2FFF9F +:10016000F3FDFF7FDEF7FDFF7FF77DFF7FDFF7BD4C +:10017000FF7FFF1FFFEFFBFEFFBFEFFBFEFFEFFB6D +:10018000FEFFBFEFFBFEFFFF3FFE7F9FE7F9FE7F15 +:100190009FE7FA7F9FE7F9FE7F9FE7FFFC7FBFBFE6 +:1001A000EFFBFEFFBFEFFBB7BFEFFBFEFFBFEFFBB9 +:1001B000FFE0FDF9FE7F9FE7F9FE7F9DF9FE7D9D43 +:1001C000E7F9FE7F9FEDEDFFFDFF7FDFF7FDFF7F8E +:1001D000DFFDFF7FDFF7FDFF7FDFFF9BFFEFFBFE14 +:1001E000FBBFEFBBFEFFAFBBBEFFBFEFFBFEFFFFE2 +:1001F000B7BFDBF6BDBF6BDBF6F9BF5BD6F9BF6FF0 +:10020000DBF6FDBFFF0EFFFFFFFF5FFFF7FFFF7F86 +:10021000F7BDFFFFFFFFFFFFFFDF9FFFFFFFFEFFB9 +:10022000FFEFFEFEFFFF77FFFBFBFFFFFFFFF83F47 +:10023000FFFDFFFFFFFDFFFFFFFFFFFFFFFFFFFFD2 +:10024000FFFFFFF47FFFFEFDBEFFDFFEFFFFEF7F3E +:10025000FFCFFFCFFFFFFFDFE6FFFF7FDFF7DD7F91 +:100260007FDFF7FF7FDFD7FDFF7FDFF7FFCDFFF2F7 +:10027000FFFF4F7FF4FFFFFFE7EFFFFFFFFFFFFFF1 +:10028000FFFFBBFFEFFFFEFFFFFFEFFFFFEFFFFBF7 +:10029000FFFFFFFFFFFFFF65EFFFFF7FFFFDEFFFAA +:1002A000FFFFFEFFFFFFFFFFFFFFFFFECFDFFEFFB1 +:1002B000FFFBFFFFFFFFF3FFFFFFFFFFFFFFFFFF5E +:1002C000FEDFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5F +:1002D000FFFFFFFFFFFEBFFFFFFFE37FFFFFFFFF0B +:1002E000FFFFEFEBFFFEBFFFEBFFFC7FFFFFFFEE2B +:1002F000FFFFFFFFFFFFDDFFD6FFFDBFFFFBFFFEA0 +:10030000FDFFFFFDEFFFFFFFFFFFFFDEFFFFFFFF32 +:10031000FFFFBFFFFDFF7FBFFF5FDFFFFFBF77FF77 +:10032000FFFF7FD7FFFFFFFFFFC3FFFFFFFFDFEFF1 +:10033000FFFFFEFBFFFFDFBFFFFFFFFFEDFFB7FF8C +:10034000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD +:10035000FFFFFFAF7FFFFFFFFFFFFFFFFFFFFFFF7D +:10036000FFFFFFFFFFFFFFFFDFBFDFF3FDFBFF5BD3 +:10037000FDFFBFEFF7FFFF7DFFFFFFFFF83BFFBF74 +:100380006FFFFEFFBFFFEB7DFFEFFBFEFFFFFFFFF9 +:10039000FFF27FFCFF3FDFEDFEFFFFFFFFEF5FF7A8 +:1003A000B5FFEFFFFFFFE03F9F9EFFFFEFFFDFFF87 +:1003B000BF5FBFCFF3FFFFFFFFFFFF69AF33FDFF5D +:1003C000FBFFFFFFFFFCFF7FD9FFDFFFFFFFFFF514 +:1003D000A3DF6EDEFFFFBDFFFFFEFFFFFFFEE7FDB9 +:1003E000FFFFFFF9EFC6FEB7ADE5F9FFFFFFCFFF57 +:1003F000FFFFCDFB7FFFFFFFF9F60FDFECCF7FFFA5 +:10040000FB7FFFFFFFFDFFFEF9FD7FFF7FFFF95B35 +:10041000FF73DCFD7BDFFFFFFF7BFFFFF753D6FFA2 +:10042000FFFFFFD89FFEFFEF7FEEFFFFFFFBEDED2D +:10043000FDFFFEFFFFFB7FFFE27FFF6FD857F7FF57 +:10044000FFFFDFFFE8FFFFFDFFFFFC7FFFE4FFFB97 +:10045000EFFBFEDFB7EDFFFEDF7FFFFE7FB7FFFFA5 +:10046000FFFF89FFFFCFF3FE7FFFEFFFFE7E7FFBE5 +:10047000FFFFFFFFFFFFFFF1FFEB7AD5BF6FDBBE92 +:10048000FDB7D8F6E5BF6FFBFEF5BD7E06FFDFF7D3 +:10049000FBF6FF3FFFDBFFFF6FFBF7FFFFFFFBFEFE +:1004A000F7AFFFB7EDEFF7FEFFFFDFFFFEFFEFFF58 +:1004B000FFFFFFBFF7FC1FEEFBFEBDFF7F5FD7FD19 +:1004C000FB43FFFFFDFF5FFFF7FFF93FFFCFF3FDAA +:1004D000F77EEFA7F9FE8FA7E9F37E9FFBF8FFFFFA +:1004E0003FFD7F5FDFFDFFFF5FFFFD5FFFFF7FFDE4 +:1004F0007FFD9FFFE0FFFAF8BE6F9FE6F8BE3F9AD0 +:10050000F9BE6F9FE2F9FE6F9FF9FFF5FD7FCFDF28 +:10051000FDFD7FFFF5FFFFFFF7F5FD0FDBFFD3FFCD +:10052000EBFAFFFFBFFFFAFFFFCBFBFEFFFFEBFA8B +:10053000FEFFFFB7FFFFFFFFBFFFDFF5FFFFD7FFA6 +:10054000FFFFDFD7F5FF7FFE4FFFFDFF7F7FFFAD92 +:10055000EBFBFFADFFFFFFFFAFEBFBFFFC0DFFFF72 +:10056000DFD2FDFFFFFDF6FFFF7FFFFF1FFFFFFF55 +:10057000FFFB3F7DEB32FEBF2FEBFAAEBDE0FA7E14 +:10058000BFADEBFAFEBFF57FFFDEFEE3FBFFFFFF33 +:10059000DFEF4FDFFF7FDFFFF7FFFFF87FFFFFEFAA +:1005A000FBFFFFFFEFFFFFDFEDFBDFFFBFFFFFFF05 +:1005B00081FFFFFFFF3FFFFFFFFFFEDDFEEFFDFFBF +:1005C000FFFBFEF7FF93FDFB7EFFFE87E9FF7FB396 +:1005D0009FFEFEFFAFFDFE7E3FFE67FFFFF7FFFFC2 +:1005E000FCF7DFFDFF7FFFFF7F6DFFFFFEFFFF2FAB +:1005F000FFBFFFFFEEFFBEFFFFFEFFEFFFFFFEFFAF +:10060000EFFFFFFA5FFFFFFBFFFFEFFFFBFEFDFFCA +:10061000FEFFFBFFFFFF7FFFFEBFDFFFFBFFFFF7DC +:10062000FCFDFFFFFFFFFF7FFFFFFFFFFFF27FFFEC +:10063000FFFFFF7FFFFFFFFFF3FFFFFFEFFBFFFF6A +:10064000FFDFE2FFFFFBFFFFFFFFFFFFFBE7FFFD19 +:10065000FFFFFFBFFFFFFFEDEFFDFFFFDFD7F5FD62 +:100660007F5DFDFF7FDF97F4FD7B5FFFC9FFFBFE32 +:10067000FFBFFF5FFFFFF7FFEFFDFFEFFFFFFFFF94 +:10068000FFF7FFD7FD7D7FFFFFFFFFEFDFF7FDFFE8 +:10069000BBFFFF7FFFFEE3FFF9FE7FBFEFFBFEFF27 +:1006A000BFF9FEFF9FEFF9FEFFBFF3DAFF37CDF38F +:1006B0007CDF37CDF37F37CDF37CDF37CCF37F5A48 +:1006C000BDF6FDBF6FDBF6FDBF6FDEFDBF6FDBF676 +:1006D000FDBF6FFEF16FEB7ADEB7ADEB7ADEB7AF41 +:1006E0007ADEB7ADEB7ADEB7FF7EFFFECDB36CDB13 +:1006F00036CDB36CDECDB36CDB36CDB36CDFC9BFAA +:10070000F7BDEF7A9EA7A9EA7AB7BDEA7BDEA7BD5F +:10071000CA728D91FFEFFBFEFFBFEFFBFEF7EFFB11 +:10072000FEFFBFEFFBFEFFFE87FFF6FDBF6FDBF6B0 +:10073000FDBF6FF6FDBF6FDBF6FDBF6FFE4FFFBF66 +:10074000EFBBEEFBBEEFBBEFBEEFBBEEFBBEEFBB06 +:10075000EFFC5FFFFFFF3FCFF3FCFF3FCFFCFF3F0E +:10076000CFF3FCFF3FCFFD9FFEBFAFEBFAFEBFAF65 +:10077000EBFEBFAFEBFAFEBFAFEBFFE16FFDFF7F1C +:10078000DFF7FDFF7FDFFDFF7FDFF7FDFF7FDFFF8F +:100790007ABFFBFEDFB7EDFB7EDFB7FB7EDFB7ED99 +:1007A000FB7EDFB7FFC9FFFFBFEFFBFEFFBFEFFB25 +:1007B000FFBFEFFBFEFFBFEEFBFEBBFFFEFFBFEF89 +:1007C000FBFEFFBFEFFEFFBFEFFBFEFF3FCFFFE7EC +:1007D000FEFFF5FD775DD735DD77D7F5CD7B5DD7AE +:1007E000F5DD77FE27FFFF8BE2F8BE2F8BE2F9AF36 +:1007F0008BE2F8BE2F8BE2F9FE1FFF5FD7F5FD7F7E +:100800005FD7F5FF5FD7F5FD7F5FD7F5FFFA3FFEB6 +:10081000BFAFEBFAFEBFAFEBECBFAFEBFAFEBFAF83 +:10082000EBFFFE7FFD7FFFFFFFFFFFFFFFFFFFFFEF +:10083000FFFFFFFFFFFFFFE6FFFADFF7FDFF7FDFB0 +:10084000F7FCFFDFF7FDFF7FDFF7FDFFF5FFFFFFA1 +:10085000FFFFFFFFFFFFFBFFFFFFFFFFFFFFFFFFAC +:10086000FF02FFFEBFABEBFABEBF23EBDE1FAFEA1A +:10087000FAFEAFAFEBFD97FFF3FC7B1FCFF1FC7FE0 +:100880001FF1FC771FCDF1FCFF1FFE87FFAFEFFAD2 +:10089000FEFFAFEFFAFDBF2BFB7EBFBFEBFBFBFB09 +:1008A000DFFFFBF7FFFF7FF7F7FFFDDFFEFCDFFF5A +:1008B000DFFFFDFFDABFFFBBEFFBF9FFBEEFFBFB86 +:1008C000BFEFFBFEFFBFEFFBFFF77FFDD7FFFF7F13 +:1008D000FFFFFFFEF7FFFEFFF7FFFF7FFFFFECFFCD +:1008E000FFFEDFBFFFFBFEFFBB68AE1FAEFBFBFFE3 +:1008F000FFBFFFD5FF7FFFFFF7FEFEFFBFEF9FFDAE +:100900007FFFCBFFFFDFFFFFBBF7BFFFFFFFFFDF77 +:10091000FFBFFBFFFFFFDE3FFFFFFFFFFFA7FFFF64 +:10092000FFFFEFFF7FFBFDFB7FFFFFFFFFCFF37CB0 +:10093000FF7F8D7FFFFFFFFFFBFFF7FBFEFDFFFF4C +:10094000FFFFF7FDFF7FFD1FFDFFFFFFFFBFDFFF85 +:10095000FFFE5CFF6DFF7FABE7F1FFFD9FFFFFAD8B +:10096000EB7A3F1FFFFFFEBFAFF3DEF5FF8FFBDF2C +:10097000E67FFFDFF3FDFF7EFFFFFFFFFFFDF7F3E5 +:100980007FDFF7EFFFF63F9FDFFFFFEEFFFFEFFB9D +:10099000FFFFF9FBFE4FBFEFBBFF69AFAFFCFF3FAF +:1009A000DDFFFCBF8FFFFDF3BFED9EFCBF6FF5D3F6 +:1009B000DFFFDBD6F5EFFDFEFFB9FF1FD2A9AFFFCA +:1009C000DBF7BFEF46FFFFADEB7ADFEFF7FF7FF717 +:1009D0009FEDFF7FFFADEB7FF56FFFFDFBD6F4F7DB +:1009E000FBF97E7FFF5FC2FEBFFDFB33DFF95BFFDC +:1009F000FFDD677DCFEFDBECFF77DDF7FDFFFFDE8F +:100A0000A7BFD49FFFFFBFEFFEFFDFEFBBFFFFEFEE +:100A1000EBFAFFEFBDFBFFE27FFFDFDFF7FDBFBBC0 +:100A200073F7FD7FDFDEF7BFEADBF6FFD6FFFF6679 +:100A3000FFBEFFBF6BD9F6DFFFFB7E7FB77EFFFEF9 +:100A4000FFCDFFFE7FFFFCFD3FFBFBF7FFFFFBF64B +:100A50007DFE7FFFFCFFB9FFF9FAFEBFAF5BD6ED6D +:100A6000AD7BF6F9BFEFF8FAFEBFFEE6FFFFF7FD3C +:100A7000FF7FBFEFF3FFFF6FF7FEFFFFF7FDFEF70E +:100A8000EFFFFBEFFB7EDEFEFFBFFFFEFFFFFBFF86 +:100A9000FFEFFB6FFC1FFEE7FFFFFFEFFFD3B4BBD1 +:100AA000FFFFFDBF6FE3FEFFBFFCBFF7CFF7FDFF0A +:100AB0002FDFABEAFFDFE7EA9AAFEFFBFEFFF53F80 +:100AC000FD7EFFD7F5FBFFFDF7FF7FFEF7FDFFD7AC +:100AD000FFD77FEE7FFA79FE2F8BE6F9FE3F9EF976 +:100AE000BE2F0BE7F9FE2F9FFDFFFE7D7F5FD7FF37 +:100AF000FF7FFFFDFF7F5F97FFFD7F5FFFE3FFFF4E +:100B0000FAFEBFAFFBFBFFFFCFEBFEBFAFFFFAFE6E +:100B1000BFFF87FFFFF5FFFFFFFFFDFF7FFFFFFF29 +:100B2000FBFFFFF5FFFFFE0FFFFDEBFFFFF7FFEF02 +:100B30007BDFFEFFFFDFF7FDEB7FDFFF5FFFFFFFE8 +:100B4000FFFDBFFF7EFABFC7DBF7BD3FFBFFF6FF30 +:100B5000FAAFFFEBFAFE3F2FEAFA3EADC9BAF6ADA7 +:100B6000AFEBFAF6BFFE7FFFFFFDFFF17F3FCFF156 +:100B7000EFFF7FFFBCDFDFF7DDFFE07FFFFFFEFF62 +:100B8000FAECBB7F5FFFFBECFFEFB7FFF7FFFFB5B2 +:100B9000FFFF7FFFFFFFEEDF5FDFDEFFAEE777FFE8 +:100BA000FFDFF7FFE3FFFABBFEFFAFFDFBFEBFABCE +:100BB000F9FEFFBF7FBFFEBDFED7FF9FFDFFBEEF6B +:100BC000FFEEFDBB5BEFFF7FEFFFEFFF7FFF4FFF10 +:100BD000EFFBBCFCFFFFFFFEFEFDFAFEFBFFFDF39B +:100BE000FBFFF85FFFFFD7F5FDDFEFFFF3DC5FCE24 +:100BF000F5BDFFFFD7FFFFF93FFFDFF7FFFEFFFD6A +:100C0000FFFBFFF7B97DFEDFFFFFFFFFF97FFFFE70 +:100C1000FFFF7FFFFEFFFFF7F6FFBFF1F8FFFFFFCB +:100C2000FFE0FFFFFFFFF9FFFFFFFFFFEFEFFFFF19 +:100C30009BFB7FFFFFFFC1FFDFFF3F5FD7BFEFBB26 +:100C4000DEEEFF7FDFFFFEF57FDFFF99FFFFFAFF9C +:100C5000BFFDEB7AFFB7FEFEFFFFEFFFFFFDBFFF1B +:100C600097FFFDF7FF7FF7FFFFFD5FFEF3F9DFDF83 +:100C7000FFFFFCFFFF83FFFFFEFF9EECFBEEFF9FED +:100C8000BFEFFFFEED7BFFFFFFF15AFFFFFDFF7C93 +:100C9000693BDFFF7F1FDFFFFDBAFFFFFBFF5BBD8F +:100CA000FFFFFFFFD7B6EDE9FFD6BD6F5FFBFFEF9C +:100CB000FF5FFEF66FFFFFFFFFF7EB7ADFFF9F7F1F +:100CC0007FFFB7FFFFFEDFFF6CFFFBFFBB6FEBFE9D +:100CD000CCF7A5FA5CF575BBB7DFFE6F5FC5BFFD4E +:100CE0007BFEFF95E729CF4FF591EE6BDFEFFD54CB +:100CF000F5BDB1FFEFEEFBBEBFAFFEDEBD6FDAF2BA +:100D0000FFAFBEFFFFFD7EA7FFF7FFBFEF7BF6FD46 +:100D1000BD4AF28585BF5BFEB5FDFAFF4FFFFEDFE2 +:100D2000FFEDFFBFFFBF7FFEFFB76DFFF7BFBFEF58 +:100D3000FD1FFFFE7DFF67FFFFFF3F7FFEBFFFE759 +:100D4000DFE7FFEF6BFC1FFFBFEFFBFEDEBFAFFA7D +:100D5000FFB6EFF9FEFF8FEFDBEFAB6FFBFEFFFFA0 +:100D6000EFFDFF7FFFFFDEFFFFEFFFFFFF3FFF6CA9 +:100D7000FFBFFBFFFEFFFBFEDFFFFFEFFFFFBFFF3D +:100D8000FFFEFBFFD57FFFFFEFFBFFFFBFEF43B58C +:100D9000FD6FCFD6BE3F7FDBFEC3FFFDFFAFEBFB9A +:100DA000FCFF3EEFE8FABDCDAAFEFE7DCFFFB7FF08 +:100DB000F7FFFFFFFDFF75CD52D7FDFBF7DDFBEF22 +:100DC000EBFFFF4FFFBF9FE7F9FC7F8BC3F9AF8FAE +:100DD000E7E9BE7F9FE6F9FC5FFFFFF7FDFF7A5F63 +:100DE000D7EDFFFFD7FFDD7FE7FFFCFFFC3FFFFFF5 +:100DF000FFFBFFFEBFAFFFFDFFEFFFEBFFFFFFFFBE +:100E0000FFF77FFF7FDFFFFDFD7FFEF7FD7FDFFF49 +:100E1000FDFFFFDFFBFFEEFFFBFFF7FDFF7ADFF5D6 +:100E2000FDFADFF7FCFF7FDFBFEDFFC9FFDFFFBF8C +:100E30002FFBFFBCADFFF7FFFFEFD3FF7DBF6FFFC1 +:100E4000FAFFFEBFAEEAFABEADA5EBCEBFA7EB5AE6 +:100E5000DEBDAF6BFD57FFFFF47F1F7FFDFF7F36C9 +:100E6000F0DF79FFFFFFF7FDBFFF87FFFBF3FCFF1C +:100E7000FFFFFF7EFFBFDFFFFFFFFFFFFDBFF89F0C +:100E8000FFFFFFFFBFFFFFFDF7FCBDFFFEFFFFFF02 +:100E9000FFFFFBF9BFFFFFEBE2FEFFBFEFA9BA2F99 +:100EA000EBF9FE77DFF7FFFFF97FFFFF7FEFD7FF5B +:100EB000FDFFFBF5FFBF6FDFFFFFFDFFFFF0FFFF53 +:100EC000FF3FCFFFBAEE9BBFEED7FECDEFFFDFBFF8 +:100ED000FFFFC5FFFFFD7F4FFDF6D9FF4FD6FDBFDA +:100EE0006EFFFFF47FFF7F8BFFFFFFFFF7FFF9FE31 +:100EF00037FFD9FBF5AFFDFFFFFBFFFF07FFFFFF4C +:100F0000FBF7FFFDFF7CFA7E4FFCDF1DC7FFFFFFF5 +:100F1000FFAEFFFFFFFFFDFBFFFFFEFEFCFF7F7F3D +:100F2000BFEFFEFFFFFF5FFDFFFFFFFD6F5AD77BA7 +:100F3000BE5FFE39FFF7FFF7FDFEAA1FFFFFFFFFB1 +:100F4000FEFEABAFFDFEBFFFF7FF7FFE8FE3FBEEC4 +:100F50007FFFFFFFFFEBFBFFFDBFEFDFFFFFFFFFAB +:100F6000FFFFFFFBE43FFFDFFFFFFFFFF3EFBBFBF4 +:100F7000BFEFBBFFD7BFFFFFFF29AFF7FFFFFBFFAF +:100F8000FBE6FF0FFB3FDF0FFFAFFFFFFFF5C3DF08 +:100F90005FFFFFFFFE6BCABEBCFF9FF2BFFFFEFA02 +:100FA000FFFFEF16FFFFFFFFFFFCDF97FD79FF3725 +:100FB000E77FFFFFB5FFFFF62FFFFDFBFEFFFFFD05 +:100FC0005F575FFFDB52DFFFFDBFFFFFFCDBFF7BF7 +:100FD000B5FD7FFF719C6EFFF635A59BFFFFFDFF02 +:100FE000FFDB9E7FFEEFFBFFFFBDEFFFDEB7F94BA0 +:100FF000FFF5EFFFFFFFE87EFFEADFF7FFFD695B2C +:10100000FC9FEF78D6FFEBEFFFFFFFE8FFFFEDFF60 +:10101000FFFFFFE3F9F6BFFFFFFEDFFF7FFFFFFFEC +:10102000D1FFFFE7FFFFFFFFE7F9FFBF7FD9FFFD1C +:10103000FE7FFFFEFFF9FFFBD6DFBFEF5BD6FFBFF2 +:10104000FBF6FFBFEFF8F6DDBEFE16FFBFEFFFFEBB +:10105000FFBFEFFFFFFF6FFBFFFFFF6FF3FFF7EF38 +:10106000FBFFBFFFEFFEFFBFFFFFFFBEBFFFEFFFB6 +:101070007FEFFFFD17FB7BFFFFFD7FDBF6F47FFAC1 +:10108000FEF5BFEBE3F7FFFFE9BFFFAFF7FDF37E30 +:101090008FA3EAFFCBF3EEFFBFEFF7F9FFFE7FFF71 +:1010A000FFFFFFF5FBF6FFF52FFEFBD7BFFFBEDF0F +:1010B0009FFFF0FFFFF9FE7F8FA3F8FE6F9FF9F609 +:1010C0002F9FE7F9FE2F9FE1FFFFFF7FDFF7F5FD81 +:1010D0007F7FF5FF9F5FFBFEFF7FFFFFCBFFFFFBE7 +:1010E000FEFFBFAFFBFEFFDFFEFEBFF7FFFFFFFF10 +:1010F000FFC7FFFFFDFF7FDDF7FDFFFFD7FFFD7F90 +:10110000FFFBFDFFFFFEEF7FFDEFFBFEFBFDFF7F23 +:10111000DFFDFF7ADFF7FDFFFFFFFF1FFFFFD3F7C4 +:10112000FFFF6FDBFFFFEFCBF4FFFFFFFFFFFFFED3 +:1011300029FFE8DA769FAF6ADAFE35EBDAD6BFAB85 +:10114000EB7ADEBFD77FFFFEFFBFEFFDDF77BFFD8E +:1011500037EFFFEFFF3FFFFFFFFE7FFFFFFFF77E51 +:10116000DFFFFFFFFAB77FFFFFFEFFFFFFFF89FFF3 +:10117000FFFFFFFFFFFFFFFFFF9FFBFFFFFFE7FFFB +:10118000FFFFFFAAFFABFBFAEFBFFFDFFA7BB9FE61 +:10119000FEFFFDFFF7FE3FFFB7FFF7EEFF7FEFFF1C +:1011A000FF7FFF1FFBFFBFFBFEFFBDFFFF2FFFBF4A +:1011B000FF7FDFFAFFFFFCEEF5F3BEFB0FEFF3BEA0 +:1011C000EFFC5FFF5AFFF7DFFFFFFED5FC5FFBF28E +:1011D000FFFF2FBBF3FFFFBFFFEFFFEFFFFFFFFF9F +:1011E000BFFFFFFD7BFFDFB9FFFBFFD87FFFFFFFE6 +:1011F000FBFFFC7F1FBFE0DFF7EFFFFD7FFEDFFFA0 +:10120000E0FFFFFDEFFBFFFEF7DFFFEB5FFFF7FF08 +:10121000FFFFFFBFFFFDFFFDFFFFFFF7FDFF3BDC13 +:10122000FD6D7B5F57F5FD7F5FFFB1FFEBFFFFFFBC +:10123000FBFBFEFFBFFBBEFFBFEFFBFEFFAFFEF7FA +:10124000DFDFFFFFFF7FCFF3F8FFD7FBFF5FBFF7C5 +:10125000FBFF7FFE23FFFFFE7FF3FFFBFEFFFFF39D +:10126000FFFFF5F9FF3FFFFFF09AFFBE7FFFFCF99C +:10127000FFFDAFEBFEBFFFCFF3FE7FFFFF5BBDFFC8 +:10128000BCEBFFD7D4AFAFFDFFCFF7FDFF7FDFF79C +:10129000FDFEFF6FFFFBFFFFFFFD7F5EFDBFDBF687 +:1012A000FDBF6FFBEEFDFF7AFFFAFBFF3FFBB75F71 +:1012B000D6F71F71DC771DC731DC77DFF9BFF55B2F +:1012C000F4D79DAEFFBFFDBFDBF6FDBF6FDBF6FEC3 +:1012D0003D81FFEBFEFEFEFFEB7ADF7D777DF5794A +:1012E000DF57DDF57D7EE6FFD63FBF7FFFD4F53FBC +:1012F000BFFBBEEFB3EEFB9EEFBBFE8BFFFEDFB787 +:10130000EDFFF7FDFEFFEFBBEEFFBEEFBBEEEBFC2C +:101310001FFFFFFDFFE7FFF7FDFFEFFEFFBFEFFB46 +:10132000FEFFBFEBFA1FFFB7EF5BFEFFAFEBDDE7A2 +:10133000DE779DE779DE779DBFE66FFFFEFFBFEFAB +:10134000FBFEFDBF6FF6FDBF6FDBF6FDBFFF7EFF4F +:10135000FFFBFEFEFFEFFBFDEF7EF7BDEF7BDEF751 +:10136000BDEFFFD5FFBFFFEFFEFFFC3F0FE7FE7FA6 +:101370009FE7F9FE7F9FE7FEF3FFFEDFADDF67EE3D +:10138000FBBFEFFEFFBFEFFBFEFFBFEFFF23FFFF43 +:10139000FFFF7FFFF3BCDBFEFBFFFBBEF7FBFF7F26 +:1013A000DFFFCFFBFF9FE3F9BE3F8FE779FF9DE7AC +:1013B000F9FE7F9FE7F9FE5FFFCFF7FFFFFFDFF743 +:1013C000FE7FE7F9FE7FFFFFFBFEFFFFBFFFBFBF12 +:1013D000FFFEFFBFEFFFFDFFFFFFFFFFFFF7FDFF7A +:1013E000FF3FFFBFFFF7FFFF7FDFFFFFFFFFFFFFB5 +:1013F000FFFFFFFFFFE8EFFF5FF7BFF9FEDFB7FD7D +:10140000FFDFF7FDFF7FDFF7FDFFDDFFF2FFBFFF2F +:10141000FFBFFFFF2FF2FFBF2F7BD2F7BF2FFFBB16 +:10142000FFEE8FAFEBFAFE3FA769CE8FA4EAFAEE8C +:10143000B7AEEBFDC7FFF7F7FFFFFFFFFF7F3EF300 +:1014400074FF3F4FFFE7FF3FFEA7FFFFDFF7B7FF48 +:10145000F7FFBAEF37EBFBFEBFFBFEF3FFF9DFFF51 +:10146000BFFFFFFFBFFFFFFFFDDFFFFDFFFFFBFE35 +:10147000FDFFFBBFFE3FEDFFDFBE3DA7FBFA3FE6F2 +:10148000E1FEFE3FEFE3DFF57FFEFF7EFFFFFFFFA4 +:10149000EF6FF6FF7DEFD7DEFF7DEFFFF2FFFFFF7F +:1014A000FFFFFF7BDEFBE6EEEF376EF37EEB37EF01 +:1014B000FFC1FFFEFFF7EFFFFFFFBF3FD2DFBF2FF0 +:1014C0007BE2FFFE3BBDDBFFFEFFFFFFFFFFEFFE0A +:1014D000FFFBFFFFBFFFFBDFFFBFFFB7FFFFBFEF5C +:1014E000FFFFFFFFFFFF0FFF7FFF1FEFF1FDFFF685 +:1014F000AFFFFFFFFFFFEFFFFFFFFE9FFFFFFF7745 +:10150000EFF7FBFFFE5FFFFFBFCFFBF7DDF7F5FF58 +:101510005FD5F5FD7F5FD7F5FFFB0FFFFFA9EA7AE7 +:10152000FFAF8FFEDFAFEFFBFEFFBFEFFBDFE55F3F +:10153000FFFFFFFFFFBD57FFFF6F77BFF7FBFF7F89 +:10154000BFF7FFFCBFFF9FFFFFEFFFFEFFFFFF1F87 +:10155000CFFFFCFFFFFFFFFB65AFF37CFF3FDFFF2B +:10156000FDE9FE7FE7FFFE7FFFFFFFFFFDE3DFFBFF +:10157000DBF6FDEF5BFBFFDFFCFF3FDFF3FDFF7FF3 +:10158000DFEF66FFDFADEB7ADEF7F7E7D9FD9F67A8 +:10159000D9F67D9FE7DFF547FD655BD6F4FEFFEFEB +:1015A000FF6DF6DDB76DDB76DCB77DFA9BF66D9DE2 +:1015B0006759DFF7DDFFEBFEBFAFEBFAFEBFAFE32E +:1015C000D19FFFBDBFEFFEF7BFBFF7D77FDDF79D10 +:1015D000DF7FDFF7FFE07FFDC1DFF7FDC77F7FFB28 +:1015E000FFBBECFB3EFFBFECFBFFD87FBF6CFFBE39 +:1015F000FFBFEDFFEFFEFBBFEFFBFEFFBFEEFFC542 +:10160000FFAF6FFFFCFD3FE7FFFEFFEFFBFEFFBFFD +:10161000EFFBFEBF89FEFABAFEBFAFFBF6F5D97D40 +:101620009765D9745D9765D3FED6FFBFF7FDFF7F41 +:10163000BFCFFBFEFFEFFBFEFFBFEFFBFFF68FFB15 +:10164000FFEFFB7EDBFEFFBEEFEEFBBEEFBBEEFB74 +:10165000BEFFFFDFFF43FFFFFBEF5FB7FE7FE7F952 +:10166000FE7F9FE7F9FE7FF9BFFEAF77FDFF2FAF4B +:10167000A7FEFFEFFBFEFFBFEFFBFEFFF17FEFDFFB +:10168000FF97F5EFFFDFFFFFBFFFBFFFFFFEFFFF8D +:10169000FFE0FFFFF9FE2F8BE3F8BE779FF9DA77C3 +:1016A0009DE779DE779FDDFFFDFD7F5FD7FDFF7F43 +:1016B000E7FE7F97E7FBFEFFBFEFFFABFFEFFAFE12 +:1016C000BFAFFFFAFFFFDFFFFBFFF7FDFF7FDFFF8D +:1016D00067FFF7F5FFFFFFDFFDFFFFFFFFFFFFFFE6 +:1016E000FFFFFFFFFFEFFFBDEBFFFFF7ADEBFFDFFE +:1016F000FDFF3FDFF7FDFF7FDFFF5FFFF7FFFFFD30 +:10170000BFFFCBF4FF7FD3F7FD3F7FD3F7FFFC3F55 +:10171000FFEAFABEAFABEBBAF4956B52D4AD2F4AE9 +:10172000D2F6BFD27FF73FFFFFF37FFFFFF7FFBA8D +:10173000DFFBFDFFBFFFFBFFF87FEAFFFEFEDFFFE1 +:10174000F7FF7FBBFFFFBFDFFBFFFFBFFFB17FFFE7 +:10175000FBEFFFFFFFFFFFBFCFFEFFFFEFFFF7FF36 +:10176000FFFFF1FF69BEFABFAFE2FFFEFDAFF3FE80 +:10177000FFBFEFFBFCFFFF07FD95DBDF7FDFAFFF68 +:10178000F7AF36FEBF65EBF6FE9F6FFE07FFCFFF9C +:10179000F8FEFFCFFFF6FAE7FBFEFFBBEDF9FFFF18 +:1017A000FF5FFFFFFF75FFEF7EFDE0E85ED3E5F929 +:1017B0003E5FD7F7FFFA2FFBFFFFFFFFFEFFFF7F24 +:1017C0007FD7F57D5F57D5F5EFFFF37FFC7FFFC730 +:1017D000F1FFFF1FCFB0FF3FCFF3FCFF3FCEFFE491 +:1017E000FFDF7FFEF7BBFFFFDFEFEEFFBFEFFBFE8C +:1017F000BFBFEFFFD1FFFFFFFDFBFFFDFFFB9FE939 +:10180000FE7F9FE7F9FE7FBFFFB3FFFFF7FFFFAF4C +:10181000F7FFB63FEBFAFEBFAFEBFAFEBFFEA7FF46 +:10182000FFFFFFFFF7FFFFFFFE9FF7F9FF7F9FE737 +:10183000FFFFFEAF6FFFFFFF9FFFDFFF7D5FDDFF5D +:10184000FBBFE7BBFFFBDF6D5F7EFFFFFFFFFFFF1F +:10185000EBF7FFE7EFF7FFFF7FFFF7FFFC8FFFEFEF +:10186000FDFEFFBEF4F27DD7CFFF3FFFFFFFFFFF7E +:10187000FFCF6BFFBF3FFBF2FC7FEBFF9FFAFFFF49 +:101880003FFFF3FFFFFD70F7FFFFBFFFFBD7FEF544 +:1018900077FF15DD77FDFF7FDFF7FBCDBFFFFDFF96 +:1018A000FFDF37CDF9ECFEEFBBF4FB3F4FB3FFFD9D +:1018B000CBFFE97E549FE54BB7FFDD7DC771DD7738 +:1018C0005DD775CD7FD6FFD3F6F93F6D95AF7FFE1F +:1018D000FFEFFBFEFFBFEFFBFEF6C7FFAD7BCAFFCE +:1018E000BFBFEFFDE3DFB7EDFB7EDF37EDE3FBDFEF +:1018F000FF525C15FDCF7FDFFEEFEFFBFEFFBFEC7D +:101900007BFEFFFE3E7FDAF7FDFF7FFFFFFBEFBBB5 +:101910006FFBFEFFBFEFFBFFF77DFFD8FFFDBF7F33 +:10192000FBFFFF9FFBFE7F9FE7F9FE7F9FEA7FF6AD +:10193000BFBD6A5AF6E5BF775F6DDD775DD775DDB0 +:1019400077FFA5BFCFFBFFFFBFCFFBFDFFBFF3FEC0 +:10195000FFBFEFFBFEFFFDABFFBFBFFFFBFF7FEF56 +:10196000FFBEFBEEFBBEEFBBEEFBBFFFB5FFD0BC87 +:10197000FD2F4BF7FFFF9FF9FE7F9FE7F9FE7F9F4B +:10198000FA8FFDABFADABFAFB3FDFFBFFBFEFFBFBF +:10199000EFFBFEF7BFFF9FFF77F7BDFD77DFFF7E11 +:1019A000DFEDBBFEFFBEEFFBFEFFFA3FFFBE6F8F1A +:1019B000E6F9FE7F9FC7FE7F9FE7F9FE7F9FE7FB6B +:1019C0007FFF7FCFFFFDFFFFDFFBAFBFEFFFFEFF1E +:1019D0009FEFFBFFFCFFFBFEFFFFFFFFFEFFFFF79C +:1019E000FFFFFFFFFFFFFFFFFFF5FFFFFF3FDFF7F9 +:1019F000FFFF7FEFFEFFBFFFFBFFFFBFEFFFB37FE8 +:101A0000FF7B5EF7FDFF7B7FF7FF7FDFF7FDFF7F4B +:101A1000DFF7FF17FFFFFF7FFFFFDDF6FCBFCBF215 +:101A2000BCBF2FCBF2FCBFFE8FFFFA7EBFA7EBDA65 +:101A3000FCBFAF7AFEBFAFEAFAFEBFAFF4DFFEFF36 +:101A4000F33C7F3EFFCFF8BF8FE3F8FE3F8FE7E820 +:101A5000FFFC9FFFFFCFEBB3E7FB7BF3FEFFCFDB8A +:101A6000FBFBBF6F6FDFEC7FFFFFF7FDFDFFFFFFAD +:101A7000FFB2BFFFDEFDBDEFFBF6DFEAE7DBFEBB3B +:101A8000FFEBFBBF9F8FE8FE3F8FA3F8FE3F8FFF6A +:101A9000F87EFDFD7FFFFBCDFFFDFF5FEFFDFFFF4C +:101AA000DFF7FDFFBE90FFFFEEFF3FBFF3BBFEB7CA +:101AB000ABFAFEAFADEAFADEABFF63FFFEF2FFB3B7 +:101AC000FFDFEE7DFF03F1F43F1FC3F1EC7FFE6FFC +:101AD000FFFBFBFF9FFFBFFF7B5FFDFFDFF7FDFD10 +:101AE0007F7FDFFECFFBFFFFAFFBFF1FEFA5FDBF3B +:101AF000DFFB7DFFBFDFFBFFFD3BFFFFFFFFFFFDC8 +:101B0000AFF3FFFB7FBFD7FBBF7FBBF7FFF87FFFC4 +:101B1000FA5FD7FFDF7FEFFFFF7FDBF7FDFF7FDFA0 +:101B2000B7FBECFFFFF7BFEFFDFCFBFFEFF0FE3F65 +:101B30008FE3F8FE3F8FEF8DFFFFEF7FBFFFFBFFCF +:101B4000DBBFFFFFFFFFFFFFFFFFFFEFD8FF2E7F91 +:101B5000BEEFFE6EFFBFF9FFFFF3FFFFFFFFFFFFCA +:101B6000FC66BE47F37FDFFE879FFFFFFFFFE7FFB7 +:101B7000FFFFFFFFFFD66F7CFB4FD2FFFD2BFEFF69 +:101B8000FFFD5FD7D5F57DFFFFFFBF9BFFFFDFB7F1 +:101B9000FFFFDFFF3FCFFE7FBFEFFBFCFF3FFFD923 +:101BA000BFFE97EC8FB7FE9B7DFDB7DD771DC7713C +:101BB000DD775DD7F36FFD3F73DDAFFD7AFFFFAFDC +:101BC000FEFDBFEFFBFEFFBFEF667FFFFFBFBFFF66 +:101BD000FBFFF7DFFDFB7DDFB7CDF37C5F3F913F80 +:101BE000FF3DEF7BFFFCFFCAEFFEFFBDEFFB1EE7F3 +:101BF000BBEC7FB3FFFD9FFFFFFEFFFF7FBFFBFE40 +:101C0000FFBFEFFBEEFBBFDF67FFFFBFEFDBFFBCFC +:101C1000FE7FFBFF9FEFF9FE7F9FE7F9FE87FFEE58 +:101C2000FBBEE5BFEFF9D765F7DDE77DDF775DD771 +:101C30007FF89BFEFFBFEFFBFFFFBFEFFBFF7FCFF8 +:101C4000F3FCFFBFEFFFDB3FEFFBFEFFDFFFFEFB21 +:101C5000BBEFBFEFBBEEFBBEEFBBFFFC7FFD3B5B13 +:101C6000D6E5FD4FC3FBFFBFEFFBFEFFBFEFFBFF62 +:101C7000B4FFFABC8FB2E9D22ECFFBFFBFEFFBFE61 +:101C8000FFBFEFFBFFECFFFDFD7FDFF7E4DF5FFF52 +:101C9000FFFBFFFFFFFFFFFFFFFFC3FFEFE6F8FEC5 +:101CA0003F8B83F9FE7FE7F9FE7F9FE7F9FE7F1701 +:101CB000FDFFFFFF7F5FF72CFFFFFFFE7FFFE7F9D0 +:101CC000FE7F9FFE2FFFFFEFFFFEBFEFADFFFF7F09 +:101CD000FFFFFFFFFFFFFFFFFEDFFFDFFFFDFD7FD9 +:101CE000DFF7FFFFFFFFFFFFFFFFFFFFFFFA3FFEF2 +:101CF000F7FDEF7AFFB1BDFF7FF7FDFF7FDFF7FD57 +:101D0000FF7FF327FFDFFFDDFFFC9BFFCBFCBF2F37 +:101D1000CBF2FCBF2FC9FFDEFFDFAFEBDAFEBBAFBC +:101D2000EBF8F7AFE8FAFEBFAFEBF2FFFDFFFFEF16 +:101D3000BDD7BFFFFFDE8FB8DE378DA378DA3F8FC8 +:101D4000FFA1FFFFFBFBFFFFFFFFA7BDFB76FDBF72 +:101D5000EFDBFEBBBFFE277FFFFEFEFDF5FFEFF5CD +:101D6000DF1FE7FDFF7FDFF7FDFFFFCDFDAEFFFAD1 +:101D70003E3FABFDF87E8FE3F8FE3E8FE3F8FFFEBB +:101D80001FEFDFBFFEDEDFD9FFDFBCFFFF7FFFEF0E +:101D9000FD7FDFF7F93FFEFFFF6FFEDEBFF7EDEAE5 +:101DA000FD8F83F8EA3F8FEFFFF47FFFEFEF7BF3C8 +:101DB000F15FFFFFF13B7FDFF7FDFFFFFFFFE0FF7C +:101DC000FFFFF7FF6FFF7FFFFFF7DEF7BFEFFBF7C8 +:101DD000FDFFFFF5FAFFFFFBE7FFF3F87FF3DFFFFF +:101DE000FFFFFFFFFFFF1FEFBBFFFFFFFFFFFFFD39 +:101DF000FF7FFF9FFFFFFFFFFFFFFFCFFF37FFFFCB +:101E00007FDF775DE7FCFFBFF7F5FBFFFFD7F5FB53 +:101E1000FFFF45FD7FEAFDBEBFDFF7FFFFDBFBFEF7 +:101E2000FFBFEFFFFFFFFB5F7FFFFEFFFFFFFFFF37 +:101E3000FFFEFFEFFDFF7FDFFFEFFBF80FF3FFF982 +:101E40002EFBFEFCF3EFFFFFBFFFFBE7FFFE7EFF75 +:101E5000C06BCFFF34DFF1FDFFEFFFFFFFDFF7FDCA +:101E6000CF7F9CFDFD6CF7FFF6FDEB2B9FFFFCFE8B +:101E70007EFFFFFFFFD7F3F7FFFBE1BFFFEB7ADE4B +:101E8000D7FBFFF9FEFFFFF3DE7FFDE77FFFFDBB22 +:101E9000FFFF7ECCF6AF5F7FFEF47DF7FDBB6EDB10 +:101EA000B7FFF7DF66FFFFF73DCFDEBDFFFFDEDBED +:101EB0008DF77EDFB7EF7FFFF687FFFFEFFEDEBF18 +:101EC000FFFFFFBBEFFDFF7BDEF73FFFBFFBDBFF4D +:101ED000F2B6FDBD7FE7FFFFFF6FF7FFFFFFFE7765 +:101EE000FFBFF8AFFFDFBFFFBF7FFBFFFFFFDBFEE2 +:101EF000FFBFFFFAFFFDFFF67FFF9FFFFF3FEFF8F9 +:101F0000EE7E9FBAFEBF8FEFFEFEF9FFFA7FFE7EE8 +:101F1000BFAFFB96FD9FEF5E65BEEF5BB6FFBEE316 +:101F2000FFB5BFFFFDFF7FFFEFDFFEFFBFFBFEFF43 +:101F3000BFCFFFFFFFFD9BFFFEFBFEDFFF7FFFF735 +:101F4000FEFFDFFBFBFEFFFFFFFFFFB7FEFAFFAB6D +:101F5000EFFFFDB57B7FFBF7FDFFFFDDFFEF8FFFA1 +:101F60002FFFFB7CFF3FDF73EBFE3FFFEFFBFEFF2E +:101F7000EFFDFFBFFD0FFFFFFFF5F9FF7FD7FDFF6F +:101F8000DFFFF7FBFF7FBFFFFFF09FFFFE7F8BE3CD +:101F9000F9DE279BE6BE7F9BC3F8DE7F9DE7FE7FD1 +:101FA000FFFF5FD7FFFFFF4FFBFFFF7FFFAFFF9FED +:101FB0007FFBFFE8FFFFFEBFAFFFFFFEBFEFF7FFB6 +:101FC000BFFFFFFFFFFFF7FFFCFFFFFD7FFFFFFFEE +:101FD000FD3FCFFFFFFFFFF7FFFD7FFFFF93FFFFF9 +:101FE0007ADFF7FFFF7B7FB7EFFFFFFDBFFDFBFF52 +:101FF000F7FFD7FFFFFFFC9F6FCBFFF4BBDFD6FDE2 +:10200000BF2FD3F7FFDFFFCFFFFABEBDAF6ADABE47 +:10201000BBAB3ABE2DAEEBDAF63FADF5DDFFCFF14F +:10202000FFF97FFF73FEFFCFC3F4F72FF3FFFCFF31 +:102030007C1FFF3F4FFF7EFFEFBDF6FEFF2BEFDC67 +:10204000FBFDFFFBFFEA7BFFFFFFFFFFFBF7DFFF6F +:10205000E37DFFB7FFBFFFFFDFFFF8FFBFFFBFEB71 +:10206000E7FAFE3DBFE9FCBFFFFAFBFEFFFFFFD929 +:10207000FFFFFFF67FFFF67DFFDFCFFDBFFBEF7EAB +:10208000FF7FFFFFD3FFFDFBFFFBFFFFFFEFFFBF66 +:10209000FEFFF7EFFFFFFFFBFF87FFFDFFFFFFFFE7 +:1020A0007BFEFFFE3BF7F7FF3FFFFFFFFFFF0FFF4A +:1020B000FFFFFFFBFFFFFFF7FFFFADFFFEF7FFFF97 +:1020C0005FFFFFDFFFFDFFF5FFDFFFBDFFE9FFC79C +:1020D000F3FFFFF7FFF3FFF83BFFFF7BDFBFFBEFF3 +:1020E000FBFFFBF7F7BBFFFFFFFFFBFFFE7FF37F6D +:1020F0005EB7BFFD7FFFF97FFBFFEBFD7F7FFFEF4B +:10210000FBE03FFEBFBFDFFF7EFFF7FFFFFEBFFF2D +:10211000DB78FFFFFFEEA1BFF5DEFBF7FFFBFFFF64 +:10212000FFFFFBFFFFD7FFFFFFFFEFF0FFFFFFF316 +:10213000F7FFEFFFE7CFFFFBFFEFFFFF9F9FEFFCF6 +:1021400016BFFEF3E4FFFFC6FFE7FFFFFDFFBFFF83 +:10215000FF3FFFBFD6AF7FFE6B7E7FFFAFFFFFBFAE +:10216000FF5FFFFEFFFFFEFFFFBDDBFFFE5FF2FF35 +:10217000FF5FFFFFFFFFFFFFEF7FFFFFFFFFDEBF00 +:10218000FFFFEFFB77FEBD7F5FFFFFFFDF6FEDFF20 +:10219000FDFF7FFD6FFFFF77DACFFD5FFFBFFFFF22 +:1021A000DF7FFFFBFFFFFFFF667FFFFEBFE7BFFA9A +:1021B000FFFEFFFFFFDFFF59EFFFEFFB7F89FFFF10 +:1021C000E9FF6FFFF5FFFFFFFFFF7FF2F7FFFFEF74 +:1021D000F87FFBFFFDFFFFD9FFEFBBFFFFFFBFEF66 +:1021E000DEFFFF9F7FDFFFF7FFFFFFFFDFFFFFAF98 +:1021F000FFFFF73FEB9FFE7F9E7F9FFE87FFEDDB9C +:1022000056FFBFAF0BD2FFEFDB6E7DBD6FF8FE3F19 +:10221000FA5BFFFDBFEFFFBF6FDBE6FFFF3FFFDFB6 +:10222000FEFFFFFFFFDA3FFFFBFEFEFFFFDFF7BD14 +:10223000FFFDFFFEFFFBFFFFFFFFF15FFD9FDFFDE7 +:10224000FFFD7FFFFFFFFF76FAFFFF7FE3F8FFAEA2 +:10225000FFFB7E9D73FFFA7FDFFFFF7FFFFBCDFF5C +:102260007FEFFBFFFDFFF77F7FEFFFEDFFFFFFB588 +:10227000FFBFFFBFFDEFDBF7FF93FFEFE2F9BE7F8C +:102280008BE7F9FE6BE7F9FE7F9FE7F9FE7F47FFDB +:10229000FFFDFF9FFFD7FFFFFFFFF5FF9FFFF7FE4B +:1022A000FFBFFE6FFFFFFBFFFFFFAFFFFFFF7FFBE7 +:1022B000FFFEFFFFFFFFFFFDDFFFFFF7FFFFFFDF79 +:1022C000FFFFFF5FFFFFFFFF5FFBFEFFF837FFFF32 +:1022D000EFFF7FFEBFFFFFFEBFFFFF7FFFBFFDFFE2 +:1022E0007FFA7FFFFF6FFFFF7DFFCFFFFFFF4FFFF5 +:1022F000F2FFFFFFFFFFFABFFFAEEBFAFEBBADEB55 +:10230000FAF7AF6BFAF6BF25E9F27F45FFFFFDF75D +:10231000F7BFFFDFFFFFBFFBFFDFF3FFF73FCFFF9D +:10232000A1FFFFBFE7FFFF7FFF3DFFFFFFF7FF2F8D +:10233000FFFBF57FFE57FFFFFFFFFFFFFFFFFFF7EC +:102340003FFFFEFFFFFFFDFEF7EEAFFEEEE7FAFFF9 +:10235000FE9DF95EFEFFEBFFFFDFA7FFFFFFFCDB4B +:10236000FFFFFF7EFBFFFFEFFBFDFFDBFFFFFFEF4C +:10237000FFFFFFFDBFFEBFFF6F7FFFF7FFFFF9FF0E +:10238000F7FFBFDEF7FFFFFFFA7FFDBF5FFFFFBF75 +:10239000FFEDFFF7BFFFFFEFFFDFFFFFFFE6FFFBF4 +:1023A0007FFFFFFFFFFFF7FFFFFFFFFFFFFFEBFFD9 +:1023B000FDFFF5FFF67FDFBDCFFFFFFFFFDFFFFF74 +:1023C000FFF9FFFFFFFFFFE3FFEEBFFF7DEFFEFF23 +:1023D000FFFFBFFFFFFFFFFEFFFFFFFFE7FFB5AE01 +:1023E000FFFFB6FEBFFFFFBFFFFFFFFFFFFFFFFFC7 +:1023F000FF27FFEFFE7FDFFF7EFFFFFFFFFFFFFFF7 +:10240000FFFFFDFFF7F99FFF5FFFFFFFFFFFFF7F6C +:10241000FFFFFEFFFFFFFFFFFFFFFF0FFFE7BFFE16 +:10242000FFBFFFFFFFFFFCBFFFFFFEFFFFFFFFC47B +:102430006BFF291FFBAFFFFFFFFFFFEF1BFEFFFC42 +:102440006FFFFFFD6AF7D7F5BFFFFEFFFFFFFFFF3E +:10245000FEBFFFFFFAFFFFF7FBDDBFFFE7FFFFFF58 +:10246000FFFFFFFFFFFD7FFFFFF5FFFFF7FDB3EF6E +:10247000FD7E5DFFFDFFFFFFFD7FD2F5FB7ECBB74D +:10248000FFFFFFC6FFFDEE63FFFFFFFFFFF6FD65E9 +:102490005BDFFFD5FFFFFFF6E7BFF7A9FFFFEDFF0B +:1024A000FFFFFFFFEBFFFFFFAFFFFFFFF81BFFE3A7 +:1024B000D0BFFFE1FFFFFFFFFFD7FFFFFF5FFFFF81 +:1024C000FFFFAFFFDB76BFFF7FFFBFEFFEFFBFEF7A +:1024D000FBFEFFFFFFBFF27FFF9FFEBDFE7FFFFF02 +:1024E000FFFFFFFFFFFFFFFFFFF73FEC7FF695BB0E +:1024F000EFF8FEFCBF2FDAFCBF2FCBF2FCBFEFFFE3 +:10250000A9BFCFFBFFFFFFFEDDB76DF6D9B66D9B10 +:1025100076D9BFFBFDA3FFBFEFFFEFFFFFFF7FDF1C +:10252000FDEF7BDEF7FDEF7FFFFF05FFFAFE7FEF9C +:10253000E3FFFFFD7FFFFFFFFF5FFFFFFD7FFBAFBF +:10254000FF63C8FFBFEFFFFFFA7FFFFFFFFE9FF7AC +:10255000FFFABFFE9FFB7FFFFFEFD7FFFFF5FFFFF7 +:10256000FFFFFD7FFFFFBFFFF9BFFFBE279FE7F91A +:10257000FE7F8BE7FE7F9FE2F9FE7F9FE7F17FFF03 +:10258000FFFFFBFEFFFFFFD7FFFFFFFFF5FFFFFF92 +:10259000D7FFFAFFFEFFFFFFFDFFFFFFAFF7FFFFD3 +:1025A000FFEBFFFFFFAFFFC4FFF7FFFFEFFFFFFFF2 +:1025B000FF5FFFFFFFFFD7FFFFFFFFFFEBFFFB7A90 +:1025C000DFF7FDFFFFFEBFFFFF7FFFAFFFFFFFF75E +:1025D000EFE3FFDDD2FFDFFFFFF2FCBFCBF6FDBF75 +:1025E0002FCBFF7FDFDEAFFFDAEEBFAFE9FAF4BD3E +:1025F000AF5AAEBBAB6BDADEBFADD75EFFFFBFFC41 +:10260000FFDFFDFFFFFFFFDFF7FFFFFFFFFDFFFA2B +:102610001FFFFEFBEFBFFDFFFDBD77FFFFFFFF9D2F +:10262000EFFFFFFFEF7DFFFBFEEFFFFFFFFFFFF779 +:10263000FFFFFFFFFFFFFFEEBFE4FBFFFE3FFEFFDC +:10264000FFFFFFAFEAFEBFAFEBFAFEFFFFFF55F65D +:10265000FFFEF7FF7FFFEBF75FC5FD7F5FD7F5FF5D +:102660006FFBFF8AFFFFFFFFEBFFFFFFFFFBBFBF1B +:10267000EFFBFFFFFFFFFBFF77DFFBFFFD7FEFFFC0 +:10268000FFFFBF7FFFDFBFFFFBFFFFFFFEEFDFFFAF +:10269000FEFF9FEF7DFFF7FF7FFFFFDFF7FDFFEFFF +:1026A000DFFFDFFFFFFFFFFFFFFFFFFFFDFFFFFB80 +:1026B000FDFFBFDFD1FFF83BFFFFFFFFFFFFFFFF85 +:1026C0007EDBFDFF77DBB77DBFFBFFF87FED7B5E39 +:1026D000FFFEFFFF4FD7FD7FDFD7F5FF7FFFFFFF37 +:1026E000F23FFEFFBFFFFFFFFFBFEFFEFF3BEEFF2E +:1026F000FCEFFFFFFF85FFFDFEFFF5FFFFFEFFDFA5 +:10270000FBFF5FBFFFFDFFFFFFFFA8FFFF9F9EFFD7 +:10271000FFFF7FF3FFFFCFFFF7FDFF7FFFFFFC16FB +:10272000BFCFA3E5EF7FFFF3E4FFCF93FCFF3FCFE5 +:10273000FFFFFFD60F7DBF6EFBF4FCAF6DDB77B7FD +:102740006DDBF6FDBFFFFFFFBF9BFADEB7B7EDF90C +:102750007EB7ACEBD6B3ADEB7ADFFFFFFFD8BFFFA0 +:10276000B7ED9F6FDDF768DB37B36CDB36CDB37F3A +:10277000FF7FF56FFDEF793DF793E47A9EADEA7A3E +:102780009EF7BDEFFFFFFF767FFBC6FFBBEFDAFED4 +:10279000FDBFFBFEFFBFEFFBFFFFFBFFA5FFFDAB98 +:1027A0006F78DE178F79DFFDFF7FDFF7FDFFFFFB1F +:1027B000FFFBFFEFFBEFFBFEFFBBDAF3EF3BCEF3DC +:1027C000BCEF3FCFDFFFB7FFFFFFCF73FFBFEFFFD0 +:1027D000F3FF3FCFF3FCFF3DCF9FFE07FFAFEBFEC4 +:1027E000FDBFEFEBFAFFAFEBFAFEBFAFFBFE3FFB27 +:1027F0009BFF7FDFFFF3FEFFDEF7BF7BDEF7BDEF62 +:102800007BFEFFFFDF3FFEFFB7FFEFF7FFBFEDFEF1 +:10281000DFB7EDFB7EDFFFFFFFFD5FEFEBFAFEF5BD +:10282000BF6FFFFFFFFFFFFFFFFFFFFEF8FFA8FFE7 +:10283000FFBFEFFB6AFBB7EFFBFFBFEFFBFEFFBF86 +:10284000EFFBFFE0FFFFFD7F5CD77DDFF35CF5CDA5 +:10285000735ED7B5FD7FEFFFDBFFFFE2F8BE2F8F82 +:10286000E7F8BE6BE2F8BE2F8BE2F9FE7FE7FFD7F9 +:10287000F5FD7FFFF7F5FD7FD7F5FD7F5FD7F5FF0E +:10288000FFFF8FFFAFEBFAFFFFBFEBFAFF2FEBFA73 +:10289000FEBFAFEBFFFFFE5FFF5FFFFFFDFFFFD758 +:1028A000FFFFFFFFFFFFFFFFFFFFFFFFBFFEB7FDC3 +:1028B000FF7EDFF7ADFF7FF7FDFF7FDFF7FDFF7FD7 +:1028C000F67FFFFFFFDBF6FCAFFFFFFFFFF7FFFF29 +:1028D000FFFFFFFFFFECBFFFAFEBFAF6AB8FEBFAAA +:1028E000F7A5EBFABEBFAFEBFAFF6DFFFF7FDF335B +:1028F000DDFF7FFEF7FC7FFBFFFFFFFFFFFFFFA970 +:10290000FFFDFFFFFEFFFFDFFFFFEFEFFDFF7FFF9C +:10291000FFFFFFFEA7FFFFFF77DFF7FD9F7FFE773B +:10292000EFFFFFFFFFFFFFFFFFAFBFAFFFF9BEBF2E +:102930008FFBFEFEEFFBFEFFBFEFFBFFFFFDDF6F38 +:10294000EFFF7FFFBFBFDFFFFCFFDFF7FDEF7FDFA4 +:10295000FFFFFF3FF6FFCFFFDBFBF7FFEB7AFFFF49 +:10296000FFBFEFFBFFFFFFFE6DFDFF5FFBFFFFF70C +:10297000FF5FF5FFFFFFFFFFFFFFFFFFF8FFFBFF1C +:10298000FFFDFFFFFFFFE7F6BFFFFFFFFFFBFFFFBE +:10299000FFC9FFFFFFBDFFBFAFEFEF3FD1FC7FFBE4 +:1029A000C7FFFFFFFFFFE3FFFFFFFFFDFFFF77FF15 +:1029B000DFB7FDF7FDF7FFFFFFFFFF57FFF7A5FDAF +:1029C0003FDFBFBFFE7FFFFFFFDFFAFDFFFFFFFE20 +:1029D00087FFE9FFFEEFBFEFFEFEFFEFFFFFFFFF08 +:1029E000FFFFFFFFFA9FFF3FFFFDFD57DFFDF3FFF6 +:1029F000DFFDFF5FDFF5FDFFFFF98FFFFFFFEE7FDC +:102A0000FFFFBF5EFEECFB3F7F9FEFF9FFFFCD6B4B +:102A1000FFFFFFC5F3FCFA38FFAF3FEE7F9FFFD902 +:102A2000FFFFFD7AF7FFF3FFAF6FDBF2B9E9FBFFC2 +:102A3000FFFFFEFFFFEFFFFBC5BFFFEFFF5EB7AD80 +:102A4000CD797CFFFFFFFFFFFFFFFFFFFD93FFEF4F +:102A5000EAFEBFEF5BD2CDF56D77DFF7FDFF7FDFDD +:102A6000FFFF66FFD5657D5F759D657FD6FB4FFFD8 +:102A7000FFFFFFFFFFFFF6C7FFBFEFFAFEFFBFEB51 +:102A8000FFDFFF7EFFFFEFFD7ED7FF78DFFF5FDF19 +:102A9000F5BF7FDFC5FF3FF67EFF0FEFF23EBFFFC2 +:102AA000FB3FFFFB7FFFB3FEFBF6FDFFDAF7FDFF09 +:102AB0007FDFF7BFFFFA7FFFFFFFFF9FFFF3DCF928 +:102AC000BFCEE7F9FE7F9FE7FFFFE27FFEFFBFEF8C +:102AD000EBFAFF9F671EFF8FE7F8FE7F8FEFFFBDCA +:102AE000BFFFFBFFFFDFF7FFFCFFBFFFFFFFFFFFA5 +:102AF000FFFFFFFDB3FFFFEFFFFFBFEDFFFBEEFEAC +:102B0000FFFFEFFFFEFFFFFFFFB5FFB7FDFD6EFF0D +:102B1000FFFEFD2FD8FEBF8FEBF9FE3FFFFACFFF80 +:102B2000E7D9FABFDF77FCFB3FABFEFFBFEFFBFE51 +:102B3000FFFFEE1FFFDFF7FFFFFF5F9735BF5EFE72 +:102B4000BFEFFFF7FDFFFFFABFFFBE6F9FE7F8BEC5 +:102B50002F8B66947D9DE7F9FE7F9FE7F17FFFFF56 +:102B6000FFF7F5FD7F5FFBFD9EFFFBFEFFFFEFFF25 +:102B7000FFA0FFFFFFBFEFEBFAFEBFB7F7F7FFFFC6 +:102B8000FDFFFFFFFFFFDDFFFDFFFFFFD7FFFFFFA3 +:102B90007FF5FFFFEFFFFFFFBFFFFFABFEFBFEFF79 +:102BA000F7AFFFFFDEF7EB5FDFF7FDFF7FDFFFFF34 +:102BB000B3FFC9FEFFFFFFFFD6FFFFCBFFFFDFFF25 +:102BC000FFFFFFFFFC8FFFBABEBFAFEB78FEB7ADD4 +:102BD0003AFEB7AFEB7AFEBFAFFF9FFFFFDFFCFF10 +:102BE000FFFEC3FEFFFF33FCFFBFDFF3FFFFBB9F12 +:102BF000FFFFFFEBDFFFFFAFF76FF9BFEFFDFFFF59 +:102C0000FFFFFFE37FFFFFFFFBFFFFBFFDFBF7FFC2 +:102C1000DFF7FFFEEF5FBDFFFAFFF8FFBFAFFBFE80 +:102C2000FE3FEFE8FFDFF3FDFFFFFFFFFFEDFFFBE0 +:102C3000FDFFAFFFFFFEFEBFDBFFFFFFBFFFDFFFBC +:102C4000FDFFCBFFFFFFFFFFBF6FFF7FB7B3FFFFAE +:102C5000DFFFFBEFFFFFFF07FFFBFFFFFFEDFFF5D0 +:102C60007CFF7FFEFFFFEFCFFFFBFFFF2FFFFFFF8C +:102C7000FFF3FFFBFFFEFFFFFFFFFFFFBFFFFFFFB5 +:102C8000FD1BFFFFFFFFFFFFFFFFFE7CFFFFFFFFBE +:102C9000EFFFFFFFFFFBBF7FFDFFFFFFFFFFFFFF1A +:102CA000DBFFFFFFFFFFFFFDFFFFF07FFFFFFFFFE9 +:102CB000FFFFFFFFFFFBFFDFFFFFFFFFFFFDBFFE8B +:102CC0007FFFFFFFFFFFFFFFFFEFFEFFBFFFFFFFE5 +:102CD000FFFFEFFAB5FFFFFFF7F7FFFFFFFFDFFB97 +:102CE000FCFFFFFEFF7FDFBFFFCBBFF9FE7F9FE74B +:102CF000F9FE7F97E1FE799FE7FDFE7FDFFE37FF5C +:102D0000FBDEDEBDEFF3FEFBAFEBFEFFFFCFFFFE12 +:102D1000FFBFFF8FFFEFFBFEFFBFE7F95E7FEFFB1B +:102D2000DAFFBFEFFBFEFFFD1FFFFFFFFFFFFFDF2F +:102D3000FFFF7FFFFFF7FB7FFFFFFFFFFC3FFFBFB2 +:102D4000EFFBFEFFBFEF7B7FBFEFFBFEFFB5EFFBAF +:102D5000BFFA7FFCFF3FCFF3FCFF3FCFBCFF3FEF4D +:102D6000F3FCFE3FCFFFEEEFFBFEFFBFEFFB6AD7AA +:102D7000B7FBF8FFB7EFBAFEFFBF7FE9FFF97E5F51 +:102D800097E5F9FE7FBFF97E5F9FE5FBFE5FB7FF2A +:102D9000A3FFF7FDFF7FDFF7FDFF5EF77DFF77DF26 +:102DA000F7FDFF7FFFD7FFFFFFFFFFFFFDDFFB7F8B +:102DB000FFFFEFFFFEFBFFFFBFFE8FFFDFF7FDFD15 +:102DC0007FDFF7FD3EDFF5BDFF7FDFF7FDF7FF9FFC +:102DD000FFFFFFFFFFFFFFFFFFFDFFBEFFFFFFFF46 +:102DE000FFFFFFFD3FFFDFF7FDFF7FDFF7FDFFCFB9 +:102DF00077FCFF5FDFF7FDFFF47FFFFFFFFFFFFFC3 +:102E0000FFFFFFFFFFFFFFFFFFFDFFFFFFEEFFFFE5 +:102E1000FFFFFFFFFFFFFFFFEDFBFFFFBFFFFFFF18 +:102E2000FFFFE9FFFFFFFFFFFFFBFFFFFFD3FFFFF8 +:102E3000BF3FFBFFFFFFFBF3FFFFFFFFFFFFFFFFB6 +:102E4000FFFFFFFFFFFEFFF7FFFFFFFF17FFFFFF83 +:102E5000DFFFFDFFFFFFFFFFDFDFFFFDFFFFDFF70E +:102E6000FF4FFFFFFFFFFFFFFFFFFFFEFFFFFFFD25 +:102E7000FFFFFFFFFEFF9FFFFFFFFFFFFFFFFFFFC3 +:102E8000FDFFFFFFFFFF7FFFFFFF7A3FFFFFFFFF19 +:102E9000FFFFFF7FFFFFFFFFFFFFFFFFFFFFFFF2CF +:102EA0007FFFFBFEFFBFEFF8FEFFBFFBFEFF8FECD7 +:102EB000FBFEFFBFF8F7FEFFBFEFFBFEFDBFCFEC51 +:102EC000FF3FEFDBF8FFBFCFFFF9FFFFBFFFFBFFC7 +:102ED000FFFFEFFBDFFFFFFFFFFFBFFFFFFFBBFFBA +:102EE000EFFBFEEFBFEEEBFBFEFFEFFEEEBFFEEBF8 +:102EF000FFEFFF17FF7EEBBBFEBFBEFBEF5BF7BD37 +:0A2F0000FBCFBFBFBBFB7ECCEFFF91 +:00000001FF + + * Copyright (C) 1999 BayCom GmbH + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that redistributions of source + * code retain the above copyright notice and this comment without + * modification. diff --git a/firmware/dabusb/firmware.HEX b/firmware/dabusb/firmware.HEX new file mode 100644 index 000000000000..7c258df2b0a7 --- /dev/null +++ b/firmware/dabusb/firmware.HEX @@ -0,0 +1,649 @@ +:02000000215786 +:0300030002016691 +:03000B0002016689 +:0300130002016681 +:03001B0002016679 +:0300230002016671 +:03002B0002016669 +:0300330002030FB6 +:03003B0002016659 +:03004300020100B7 +:03004B0002016649 +:0300530002016641 +:03005B000204BDDF +:0300630002016730 +:03010000020C5A94 +:030104000201ED08 +:030108000202519F +:03010C0002027C70 +:030110000202E404 +:0101140032B8 +:0101180032B4 +:03011C000205FDDC +:03012000020000DA +:03012400020000D6 +:0301280002043C92 +:03012C0002046A60 +:03013000020000CA +:03013400020000C6 +:03013800020000C2 +:03013C00020000BE +:03014000020000BA +:03014400020000B6 +:03014800020000B2 +:03014C00020000AE +:03015000020000AA +:03015400020000A6 +:0A01570075817FE5826003020161FB +:0501610012076F21648C +:010166003266 +:0E016700C0D0C086C082C083C0E0907F97E009 +:0E0175004480F0907F69F0F0F0F0F0F0F0F0D0 +:0E018300F0F0F0F0F0F0F0F0F0F0F0F0F0F04E +:0E019100F0F0F0F0F0F0F0F0F0F0907F97E07A +:03019F00557FF099 +:0E01A200907F9AE030E423907F68F0F0F0F058 +:0E01B000F0F0F0F0F0F0F0F0F0F0F0F0F0F021 +:0E01BE00F0F0F0F0F0F0F0F0F0F0F0F0F0F013 +:0E01CC00E5D8C2E3F5D8D0E0D083D082D0864B +:0301DA00D0D03250 +:0801DD0075860090FFC37C054C +:0701E500A3E582458370F9D8 +:0101EC0022F0 +:0E01ED00C0E0C0F0C082C083C002C003C0D01A +:0E01FB0075D000C086758600E591C2E4F591CE +:0D020900908800E0F541907FAB7402F0900A +:090216007FAB7402F0E5326021B7 +:04021F007A007B00E6 +:0B022300C3EA9418EB64809480501232 +:0E022E00907F69F0F0F0F0F0F0F0F00ABA0006 +:02023C00010BB4 +:02023E0080E35B +:02024000D08666 +:0E024200D0D0D003D002D083D082D0F0D0E054 +:01025000327B +:0E025100C0E0C0F0C082C083C0D075D000C035 +:0E025F0086758600E591C2E4F591907FAB7440 +:04026D0004F0D08643 +:0B027100D0D0D083D082D0F0D0E0329B +:0E027C00C0E0C0F0C082C083C002C003C00456 +:0E028A00C005C006C007C000C001C0D075D0BE +:0D02980000C086758600E591C2E4F59190E6 +:0C02A5007FAB7408F0756E00756F0212DC +:0602B1001144757039755F +:0602B700710C75720212C9 +:0C02BD001175907FD6E4F075D820D08633 +:0E02C900D0D0D001D000D007D006D005D00490 +:0D02D700D003D002D083D082D0F0D0E0322E +:0E02E400C0E0C0F0C082C083C0D075D000C0A2 +:0E02F20086758600E591C2E4F591907FAB74AD +:0403000010F0D086A3 +:0B030400D0D0D083D082D0F0D0E03207 +:0E030F00C0E0C0F0C082C083C002C003C004C2 +:0E031D00C005C006C007C000C001C0D075D02A +:0C032B0000C086758600756E00756F02BC +:0703370012114475704075BE +:06033E00710C7572021241 +:0E0344001175907FD67402F0907FD67406F08B +:0503520075D810D086F3 +:0E035700D0D0D001D000D007D006D005D00401 +:0D036500D003D002D083D082D0F0D0E0329F +:0D037200907FA57480F0907FA6749AF01221 +:0C037F00101B907FA6E542F012101B90AE +:0D038B007FA6E543F012101B907FA5744083 +:01039800F074 +:010399002241 +:0D039A00907FA57480F0907FA6749AF012F9 +:0C03A700101B907FA6E544F012101B9084 +:0C03B3007FA6E545F012101B907FA6E528 +:0B03BF0046F012101B907FA57440F068 +:0103CA002210 +:0A03CB0075440275450075460012E6 +:0903D500039A75420375430012FE +:0203DE000372A8 +:0103E00022FA +:0C03E100908800E536F09088007410252C +:0903ED0036F01201DD75420175C4 +:0903F600431812037275440275EC +:0903FF00450075460012039A75D1 +:08040800420375434412037224 +:0104100022C9 +:0E041100C0E0C0F0C082C083C0D075D000C073 +:0E041F0086758600E591C2E4F591907FAA747F +:04042D0002F0D08683 +:0B043100D0D0D083D082D0F0D0E032D9 +:0E043C00C0E0C0F0C082C083C0D075D000C048 +:0E044A0086758600E591C2E4F591907FA97455 +:0704580004F0753001D086AD +:0B045F00D0D0D083D082D0F0D0E032AB +:0E046A00C0E0C0F0C082C083C0D075D000C01A +:0E04780086758600E591C2E4F591907FAA7426 +:0704860004F0753101D0867E +:0B048D00D0D0D083D082D0F0D0E0327D +:0E049800C0E0C0F0C082C083C0D075D000C0EC +:0C04A60086758600E591C2E5F591D086D0 +:0B04B200D0D0D083D082D0F0D0E03258 +:0E04BD00C0E0C0F0C082C083C0D075D000C0C7 +:0C04CB0086758600E591C2E7F591D086A9 +:0B04D700D0D0D083D082D0F0D0E03233 +:0C04E200907FEAE0FA8A20907F96E4F018 +:0104EE0022EB +:0704EF00907FEAE0FA8A2188 +:0104F60022E3 +:0E04F700901713E0FA901715E0FB74802AFAB4 +:0E05050074802BFBEA0303543FFCEAC423542A +:0E0513001FFA2CFAEB0303543FFCEBC42354F5 +:0B0521001FFB2CFB90170AE0FC60029F +:02052C007A0053 +:07052E0090170CE0FC6002D5 +:020535007B0049 +:0B053700EA2BFCC313F53A7544028B5D +:07054200458A4612039A7579 +:090549006E08756F001211447573 +:040552007047757108 +:080556000C757202121175858B +:05055E003A731211A028 +:010563002275 +:0E056400907F96E0FA907F9674806502F0908A +:0E0572007FEBE0FA907FEAE0FB907FEFE0FC89 +:0E0580003395E0FD8C057C00907FEEE0FE33AD +:0E058E0095E0FFEC2EFCED3FFD907FE9E0FED6 +:05059C00BE0102800316 +:0305A1000205F957 +:0605A400BC0121BD001E98 +:0E05AA00EAC40354F8FCEB25E0FD2C2400FC11 +:0E05B800E43417FD907EC0E0FE8C828D83F04F +:0205C600803182 +:0E05C800EAC40354F8FAEB25E0FB2AFA2400FB +:0E05D600FBE43417FC907EC0E0FD8B828C832A +:0E05E400F074012A2400FAE43417FB907EC163 +:0705F200E0FC8A828B83F01C +:0305F90075380151 +:0105FC0022DC +:0E05FD00C0E0C0F0C082C083C002C003C004D2 +:0E060B00C005C006C007C000C001C0D075D039 +:0D06190000C086758600E591C2E4F5919061 +:0D0626007FAA7401F0120564753700D086BC +:0E063300D0D0D001D000D007D006D005D00422 +:0D064100D003D002D083D082D0F0D0E032C0 +:0E064E00907FEBE0FA907FEAE0FB907FEEE019 +:0E065C00FC3395E0FD907F96E0FE907F967453 +:0E066A00806506F0907F007401F0EAC403542E +:0E067800F8FEEB25E0FB2EFE2400FBE4341719 +:0E068600FF8B828F83E0FB74012E2400FEE4C4 +:0E0694003417FF8E828F83E0FE907FE9E0FF37 +:0306A200BF810A0B +:0A06A500907F00EBF0907F01EEF073 +:0806AF00907FE9E0FBBB821A19 +:0306B700BA010C79 +:0C06BA00907F00E4F0907F01E4F0800BE2 +:0B06C600907F00E4F0907F0174B5F01D +:0806D100907FE9E0FBBB831BF5 +:0306D900BA010D56 +:0D06DC00907F007401F0907F01E4F0800B2E +:0B06E900907F00E4F0907F017412F09D +:0806F400907FE9E0FBBB841CD0 +:0306FC00BA010D33 +:0D06FF00907F007401F0907F01E4F0800C0A +:0C070C00907F007480F0907F017401F079 +:05071800907FB5ECF03C +:01071D0022B9 +:0C071E0075360D908800741DF0756B801E +:0A072A00756C3C1210E2756B8075CF +:090734006C0F1210E2756B807568 +:09073D006C061210E2756B807568 +:070746006C011210E27A00C1 +:03074D00BAFF00F0 +:02075000500A4D +:0A075200C0021201DDD0020A80F19E +:0A075C00756B80756C3C1210E2759D +:080766006B80756C0F1210E2AC +:01076E002268 +:0E076F00907FA1E4F0907FAF7401F0907F9234 +:0E077D007402F0758E3175892175880075C87B +:0E078B0000758D4075984075C04075870075EB +:0907990020007521007522007595 +:0507A200230075470073 +:0707A700C3E5479420501147 +:0D07AE00E5472400F582E43417F583E4F0FC +:0407BB00054780E886 +:0907BF00E4F540F53FE4F53CF5DA +:0707C8003BE4F53EF53D7531 +:0B07CF003200753700753900907F93F1 +:0E07DA00743CF0907F9C74FFF0907F967480CA +:0E07E800F0907F947470F0907F9D748FF0906D +:0E07F6007F97E4F0907F9574C2F0907F987426 +:0E08040028F0907F9E7428F0907FF0E4F09032 +:0E0812007FF1E4F0907FF2E4F0907FF3E4F0E9 +:0E082000907FF4E4F0907FF5E4F0907FF6E432 +:0E082E00F0907FF7E4F0907FF8E4F0907FF90F +:0E083C007438F0907FFA74A0F0907FFB74A0E7 +:0E084A00F0907FFC74A0F0907FFD74A0F09001 +:0E0858007FFE74A0F0907FFF74A0F0907FE010 +:0E0866007403F0907FE17401F0907FDD7480E8 +:0B087400F012124312071E7A007B00F6 +:09087F00C3EA941EEB940050172B +:0C088800908800E0F54790880BE0F547F1 +:09089400907F68F00ABA00010B24 +:02089D0080E0F9 +:0C089F001203E1907FD6E4F07A007B00A9 +:0D08AB008A048B05C3EA94E0EB942E501AEA +:0E08B800C002C003C004C0051201DDD005D08F +:0A08C60004D003D0020ABA00010BAF +:0208D00080D9CD +:0D08D200907FD67402F0907FD67406F090EF +:0E08DF007FDE7405F0907FDF7405F0907FAC33 +:0E08ED00E4F0907FAD7405F075A88075F810EA +:0D08FB00907FAE740BF0907FE27488F09057 +:0C0908007FAB7408F075E81175320175C2 +:0C0914003100753000C004C0051204F76B +:0A092000D005D004753400753501D0 +:0D092A00907FAE7403F08C02BA00028003CF +:03093700020A3F72 +:0C093A00853334907F9D748FF0907F9780 +:0E0946007408F0907F9D7488F0907F9AE0FA1C +:0C09540074055AF533907F9D748FF0906D +:0D0960007F977402F0907F9D7482F0E53364 +:0D096D0025E0FA907F9AE05405FB4AF5332F +:02097A00600C0F +:0C097C00907F96E0FA907F9674804AF01D +:0B098800756E00756F00C004C0051202 +:0E0993001144D005D004901713E0FA74802AA6 +:0609A100FAE533B404295D +:0309A700BAA000F3 +:0209AA005024D7 +:0D09AC00901713E004FB0B901713EBF09075 +:0E09B9001713E0FB901715F0C002C004C00534 +:0909C7001204F7D005D004D0029F +:0509D000E533B402262E +:0609D500C374049A5020D7 +:0D09DB00901713E0FA1A1A901713EAF09023 +:0D09E8001713E0FA901715F0C004C00512B7 +:0609F50004F7D005D00458 +:0509FB00E533B4081D06 +:040A0000E534701950 +:0A0A040074012535540FF5358535D2 +:0C0A0E0075757600C004C0051213FED000 +:030A1A0005D00400 +:050A1D00E533B4011DEA +:040A2200E53470192E +:0A0A2600E53524FF540FF535853542 +:0C0A300075757600C004C0051213FED0DE +:030A3C0005D004DE +:0E0A3F00C004C0051201DDD005D004907F96E2 +:0E0A4D00E0FA907F96747F5AF0907F977408BD +:0A0A5B00F0C3EC9400ED9402400893 +:080A6500907F96E0FA20E608FC +:080A6D00C3E49C74089D5013C2 +:0E0A7500907F96E0FA907F9674406502F07CC8 +:050A8300007D0080056C +:050A88000CBC00010D93 +:050A8D00E538B4010E84 +:0D0A9200C004C0051204F7D005D00475386B +:010A9F000056 +:070AA000E531700302092A91 +:0A0AA700907FC9E0FA7003020C2DE5 +:0E0AB100907F96E0FA907F9674806502F09038 +:090ABF007DC0E0FABA2C028003AC +:030AC800020B36E8 +:050ACB007532007B0004 +:030AD000BB640004 +:020AD300501CB5 +:0E0AD500C002C003C004C0051201DDD005D070 +:0D0AE30004D003D00290880FE0F5470B808F +:010AF000DF26 +:0D0AF100C002C004C00512071E1203E1126E +:0C0AFE0004F7D005D004D002756E00751E +:0D0B0A006F01C002C004C005121144D005E7 +:090B1700D004D00275704D757117 +:0B0B20000C757202C002C004C0051278 +:0B0B2B001175D005D004D002020C2D83 +:030B3600BA2A3B9D +:0D0B3900907F987420F0C002C004C0051227 +:0E0B460001DDD005D004D002907F987428F015 +:020B54007B0024 +:030B5600BB0A00D7 +:050B59004003020C2D19 +:0E0B5E00C002C003C004C0051201DDD005D0E6 +:080B6C0004D003D0020B80E26B +:030B7400BA2B1A7F +:080B7700907FC9E0FBBB4012B6 +:0E0B7F00C002C004C005121205D005D004D07B +:040B8D0002020C2D27 +:030B9100BA101F78 +:0E0B9400907F96E0FB907F9674806503F0C022 +:0E0BA20002C004C00512103DD005D004D002E0 +:030BB000020C2D07 +:030BB300BA111262 +:0E0BB600C002C004C00512106AD005D004D0E1 +:040BC40002020C2DF0 +:030BC800BA12124C +:0E0BCB00C002C004C00512108FD005D004D0A7 +:040BD90002020C2DDB +:030BDD00BA130B3D +:0B0BE000907DC1E0FB908800F0804297 +:030BEB00BA141128 +:0E0BEE00C002C004C0051211DDD005D004D035 +:030BFC0002802E46 +:030BFF00BA151D07 +:0C0C0200907DC1E0F575907DC2E0F576B4 +:0E0C0E00C002C004C0051213FED005D004D0F1 +:030C1C0002800E45 +:030C1F00BA160BF7 +:0B0C2200C004C0051213A3D005D004CD +:0B0C2D00907FC9E4F075310002092A35 +:010C38002299 +:070C3900535550454E4400E5 +:070C4000524553554D4500DC +:060C470020566F6C200036 +:0D0C4D004441425553422076312E30300094 +:0E0C5A00C0E0C0F0C082C083C002C003C0046E +:0E0C6800C005C006C007C000C001C0D075D0D6 +:0D0C760000C086758600E591C2E4F59190FE +:0E0C83007FAB7401F0907FE8E0FA907FE9E02B +:060C9100FBBB0002800322 +:030C9700020D3813 +:030C9A00BA801409 +:0E0C9D00907F007401F0907F01E4F0907FB52D +:060CAB007402F0020ECD00 +:050CB100BA820280037D +:030CB600020D1D0F +:080CB900907FECE0FCBC01009F +:020CC1004021D0 +:060CC300C374079C401BF6 +:0E0CC900EC24FF25E0FD24C6F582E4347FF51F +:0D0CD70083E0FD530501907F00EDF0802BC0 +:030CE400BC8100D0 +:020CE7004021AA +:060CE900C374879C401B50 +:0E0CEF00EC247F25E0FC24B6F582E4347FF58A +:0D0CFD0083E0FC530401907F00ECF08005C3 +:050D0A00907F00E4F001 +:0E0D0F00907F01E4F0907FB57402F0020ECDEB +:050D1D00BA8102800311 +:030D2200020EC5F9 +:0E0D2500907F00E4F0907F01E4F0907FB574C1 +:050D330002F0020ECDEC +:030D3800BB012DCF +:060D3B00BA0003020ECD18 +:030D4100BA0211E2 +:0D0D4400755900C002C003120EF0D003D09C +:040D510002020ECDBF +:050D5500BA2102800339 +:030D5A00020ECDB9 +:0B0D5D00753701907FC5E4F0020ECD59 +:030D6800BB031FAB +:060D6B00BA0003020ECDE8 +:050D7100BA020280033C +:030D7600020ECD9D +:0D0D7900755901C002C003120EF0D003D066 +:040D860002020ECD8A +:030D8A00BB065451 +:050D8D00BA80028003A2 +:030D9200020EC589 +:080D9500907FEBE0FCBC0115AE +:0C0D9D007CFB7D0F8D067F00907FD4EE64 +:090DA900F0907FD5ECF0020ECDB4 +:0A0DB200907FEBE0FCBC020280031E +:030DBC00020EC55F +:0A0DBF00907FEAE0FCBC0002800314 +:030DC900020EC552 +:0C0DCC007C3B7D0F8D067F00907FD4EEF5 +:090DD800F0907FD5ECF0020ECD85 +:060DE100BB0703020EC572 +:030DE700BB081036 +:0D0DEA00AC48907F00ECF0907FB57401F0F4 +:030DF700020ECD1C +:030DFA00BB093101 +:050DFD00BA00028003B2 +:030E0200020EC518 +:0E0E0500907FEAE0FCC374019C5003020EC50E +:080E1300907FEAE0FCBC000A3C +:0A0E1B00901721E4F0901722E4F094 +:090E2500907FEAE0F548020ECDD1 +:030E2E00BB0A27D5 +:050E3100BA81028003FC +:030E3600020EC5E4 +:0E0E3900907FECE0FA2420FAE43417FC8A8261 +:0E0E47008C83E0FA907F00F0907FB57401F08C +:030E5500020ECDBD +:050E5800BB0B0280034A +:030E5D00020EA9D9 +:0D0E6000901720E4F0907FECE0FABA011A40 +:080E6D00907FEDE0FABA0012DB +:0E0E7500907FEAE0FA901721F0C0031204E229 +:040E8300D0038046D2 +:080E8700907FECE0FABA023E94 +:080E8F00907FEDE0FABA003695 +:0D0E9700C0031204EFD003907FEAE0FA9050 +:050EA4001722F080247C +:050EA900BB12028017DE +:050EAE00BB8102800D74 +:050EB300BB8302800872 +:050EB800BB8202800373 +:030EBD00BB8405EE +:050EC00012064E80083F +:080EC500907FB47403F0800675 +:060ECD00907FB47402F0F6 +:020ED300D086C7 +:0E0ED500D0D0D001D000D007D006D005D00478 +:0D0EE300D003D002D083D082D0F0D0E03216 +:0B0EF000907FECE0F55AC39401401D18 +:070EFB00C37407955A40166D +:0D0F0200E55A24FF25E0FA24C6F582E43408 +:090F0F007FF583AA59EAF0802263 +:070F1800C3E55A9481401B60 +:070F1F00C37487955A4014CA +:0D0F2600E55A24FF25E0FA24B6F582E434F4 +:070F33007FF583AA59EAF0E3 +:010F3A002294 +:0E0F3B000902BA000301004000090400000092 +:0E0F49000101000009240100013D0001010C1E +:0E0F570024020110070002030000000D240612 +:0E0F650003010215000300030000092403022B +:0E0F7300010100010009240304020300030031 +:0E0F8100092403050306000100090401000015 +:0E0F8F00010200000904010101010200000737 +:0E0F9D002401020101000B24020102021001D6 +:0E0FAB0080BB00090588050001010000072534 +:0E0FB900010000000009040200020000000018 +:0E0FC7000705820240000007050202400000FC +:0E0FD50009040201030000000007058202402B +:0E0FE30000000705020240000009058905A074 +:0A0FF1000101000000FFFFFFFF00F8 +:0E0FFB00120100010000004047059999000115 +:0E10090000000001000000000000000902BA13 +:0410170000030100D1 +:02101B007A0059 +:03101D00BA050011 +:02102000501767 +:08102200907FA5E0FB30E00522 +:05102A00900001800DA3 +:0A102F00C0021201DDD0020A80E4C5 +:0310390090000123 +:01103C002291 +:0E103D00907DC1E0F9A3E0FAA3E0FB7C007D0A +:04104B007EEB6012C6 +:0E104F0089828A83E0A3A982AA838C828D8382 +:04105D00F00CDBEECA +:08106100907DC3E0907FB9F01F +:011069002264 +:0E106A00907DC1E0F9A3E0FAA3E0FB7CC47D19 +:041078007DEB60E5C7 +:0E107C008C828D83E00C89828A83F0A3A98286 +:04108A00AA83DBEE6C +:01108E00223F +:0E108F00907FA57480F00586907DC1E00586F7 +:0E109D00A3F012101B907FA60586A3A3E0F916 +:0510AB006016A305869C +:0D10B000907FA60586E0A30586F0C0011222 +:0610BD00101BD001D9ED6B +:0610C300907FA57440F0CF +:0110C9002204 +:0810CA009088027401F07A0025 +:0310D200BAFF0062 +:0210D500500ABF +:0A10D700C0021201DDD0020A80F110 +:0110E10022EC +:0510E200E56BB4C0083D +:0810E700908803E56CF080061F +:0610EF00908802E56CF0A0 +:0410F5007A007B0002 +:0B10F900C3EA9432EB6480948050073F +:051104000ABA00010B16 +:0211090080EE76 +:01110B0022C1 +:0A110C00908803E56DF005397A00C4 +:03111600BA2800F4 +:02111900500381 +:03111B000A80F84F +:05111E00E539B41008E2 +:0811230090880274C0F0800EF8 +:05112B00E539B42009C4 +:091130009088027480F07539000A +:021139007A003A +:03113B00BA2800CF +:02113E0050035C +:031140000A80F82A +:011143002289 +:04114400E56F6002F1 +:0211480080071E +:07114A007A007539008005F1 +:051151007A4075391021 +:09115600E56E2AFAE56E2539F573 +:0A115F003990880274802AF07A00AB +:08116900C3EA648094A850035E +:031171000A80F5FC +:011174002258 +:06117500AA70AB71AC7220 +:0C117B008A828B838CF01214EEFD601849 +:0D1187008D6DC002C003C00412110CD00415 +:09119400D003D0020ABA00010BDD +:02119D0080DCF4 +:01119F00222D +:0D11A000E573C4540FFA53020FC374099A8B +:0211AD005006EA +:0611AF0074372AFB8004E6 +:0411B50074302AFB6D +:0C11B9008B6DC00312110CD003AA7353FD +:0811C500020FC374099A5006E1 +:0611CD0074372AFB8004C8 +:0411D30074302AFB4F +:0511D7008B6D12110CEC +:0111DC0022F0 +:0711DD00907DC3E0FA600FF2 +:0C11E400907DC1E0F56E907DC2E0F56FDB +:0311F00012114495 +:0C11F300907DFFE4F07570C475717D758F +:0511FF007201121175E0 +:0112040022C7 +:021205007A0469 +:03120700BA4000EA +:02120A0050365C +:0E120C00EA24C0F582E4347DF583E0FB7C002B +:03121A00BC08000D +:02121D0050205F +:06121F008B05ED30E70B2A +:0B122500907F967442F074C3F08008C4 +:08123000907F96E4F07481F058 +:07123800EB25E0FB0C80DB5D +:03123F000A80C55D +:011242002289 +:041243007A007BEFC3 +:03124700BA1000DA +:02124A00502032 +:0E124C0074112BFB2400FCE43418FD8C828D01 +:0E125A0083E4F0EA2400F582E43419F583E41D +:04126800F00A80DB2D +:01126C00225F +:0E126D0074F82400F58274033484F583E4F0F1 +:0E127B0074F92400F58274033484F583E4F0E2 +:0E12890074FA2400F58274033484F583E4F0D3 +:0E12970074FB2400F58274033484F583E4F0C4 +:0E12A50074FF2400F58274033484F583E4F0B2 +:0112B3002218 +:0E12B4001203CB12126D7AC07B877C0174018D +:0E12C2002AFDE43BFE8C078A828B838CF0743D +:0E12D000011214BF2DFAE43EFB8F048D828EB6 +:0E12DE00838FF074061214BF74012AFDE43BE6 +:0E12EC00FE8C078A828B838CF0E41214BF7490 +:0E12FA00012DFAE43EFB8F048D828E838FF06F +:0E130800740B1214BF74012AFDE43BFE8C0727 +:0E1316008A828B838CF074081214BF74012D30 +:0E132400FAE43EFB8F048D828E838FF07401FD +:0E1332001214BF2AFDE43BFE8C078A828B83D7 +:0E1340008CF0E41214BF74012DFAE43EFB8F12 +:0E134E00048D828E838FF074031214BF7D0015 +:03135C00BD0600CB +:02135F0050122A +:0B1361008A828B838CF00ABA00010B1B +:07136C00E41214BF0D80E93B +:0D1373008A828B838CF0E5741214BF74F92C +:0E1380002400F58274033484F583740FF07436 +:0E138E00FE2400F58274033484F5837401F0AC +:06139C001203E11204F748 +:0113A2002228 +:0D13A300907DC1E0FA2400FBE43419FC90B9 +:0E13B0007DC2E0FD8B828C83F075F011EAA403 +:0313BE00FA7B00B7 +:0313C100BB10005E +:0213C4005024B3 +:0E13C600EA2400FCE43418FDEB2CFCE43DFDB1 +:0E13D40074042B24C0F582E4347DF583E0FE22 +:0813E2008C828D83F00B80D793 +:0E13EA00EA2400FAE43418FB74102AF582E4B9 +:0513F8003BF583E4F069 +:0113FD0022CD +:0413FE00E57660022E +:02140200801652 +:0C140400740F5575FA8A752400F582E417 +:0A1410003419F583E0F5741212B4EC +:0A141A001210CA756E00756F001203 +:0614240011447570B9755A +:06142A007114757202123C +:0B1430001175E576B402047401800120 +:01143B00E4CC +:03143C00FA700F34 +:0C143F0074012575F573C0021211A0D0D5 +:03144B0002800A12 +:0A144E00857573C0021211A0D002D0 +:0C145800756E00756F01C002121144D0C7 +:0414640002EA701A0E +:0D14680075F011E575A4FA2400FAE43418BB +:09147500FB8A708B717572011283 +:04147E00117580362E +:021482007A00EE +:03148400BA10009B +:02148700502FE4 +:0D148900EA2400F582E43419F583E0FBE568 +:0414960075B5031B0A +:0E149A0075F011EAA4FB2400FBE43418FC8B6F +:0914A800708C71757201C0021212 +:0414B1001175D002DF +:0314B5000A80CCDE +:0114B8002211 +:0614B90050726F67200075 +:0E14BF00C8C0E0C8C0E0E5F0600B14600F1478 +:0714CD00601114601280158C +:0714D400D0E0A882F6800EB3 +:0514DB00D0E0F08009E3 +:0414E000D0E08005D3 +:0514E400D0E0A882F237 +:0414E900C8D0E0C8BF +:0114ED0022DC +:0E14EE00C8C0E0E5F0600D14600F14600F142C +:0614FC00601074FF800F78 +:05150200A882E6800A4A +:03150700E080077A +:04150A00E4938003E3 +:03150E00A882E2CE +:04151100F8D0E0C866 +:0115150022B3 +:00000001FF + + * Copyright (C) 1999 BayCom GmbH + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that redistributions of source + * code retain the above copyright notice and this comment without + * modification. -- cgit v1.2.3 From fb54be8755d386008bfadb7fc8ff89451fa3a9c9 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Date: Fri, 27 Jun 2008 19:50:40 +0530 Subject: vicam: use request_firmware() Although it wasn't actually using ihex records before, we use the Intel HEX record format for this firmware -- because that gives us a simple way to split it into separate chunks internally as we need, without loading each part as a separate file. Signed-off-by: Jaswinder Singh Signed-off-by: David Woodhouse --- drivers/media/video/usbvideo/vicam.c | 317 +++-------------------------------- firmware/Makefile | 1 + firmware/WHENCE | 10 ++ firmware/vicam/firmware.H16 | 7 + 4 files changed, 39 insertions(+), 296 deletions(-) create mode 100644 firmware/vicam/firmware.H16 diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index 17f542dfb366..40d053e0d5bf 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -43,6 +43,8 @@ #include #include #include +#include +#include #include "usbvideo.h" // #define VICAM_DEBUG @@ -70,284 +72,6 @@ #define VICAM_HEADER_SIZE 64 -/* Not sure what all the bytes in these char - * arrays do, but they're necessary to make - * the camera work. - */ - -static unsigned char setup1[] = { - 0xB6, 0xC3, 0x1F, 0x00, 0x02, 0x64, 0xE7, 0x67, - 0xFD, 0xFF, 0x0E, 0xC0, 0xE7, 0x09, 0xDE, 0x00, - 0x8E, 0x00, 0xC0, 0x09, 0x40, 0x03, 0xC0, 0x17, - 0x44, 0x03, 0x4B, 0xAF, 0xC0, 0x07, 0x00, 0x00, - 0x4B, 0xAF, 0x97, 0xCF, 0x00, 0x00 -}; - -static unsigned char setup2[] = { - 0xB6, 0xC3, 0x03, 0x00, 0x03, 0x64, 0x18, 0x00, - 0x00, 0x00 -}; - -static unsigned char setup3[] = { - 0xB6, 0xC3, 0x01, 0x00, 0x06, 0x64, 0x00, 0x00 -}; - -static unsigned char setup4[] = { - 0xB6, 0xC3, 0x8F, 0x06, 0x02, 0x64, 0xE7, 0x07, - 0x00, 0x00, 0x08, 0xC0, 0xE7, 0x07, 0x00, 0x00, - 0x3E, 0xC0, 0xE7, 0x07, 0x54, 0x01, 0xAA, 0x00, - 0xE7, 0x07, 0xC8, 0x05, 0xB6, 0x00, 0xE7, 0x07, - 0x42, 0x01, 0xD2, 0x00, 0xE7, 0x07, 0x7C, 0x00, - 0x16, 0x00, 0xE7, 0x07, 0x56, 0x00, 0x18, 0x00, - 0xE7, 0x07, 0x06, 0x00, 0x92, 0xC0, 0xE7, 0x07, - 0x00, 0x00, 0x1E, 0xC0, 0xE7, 0x07, 0xFF, 0xFF, - 0x22, 0xC0, 0xE7, 0x07, 0x04, 0x00, 0x24, 0xC0, - 0xE7, 0x07, 0xEC, 0x27, 0x28, 0xC0, 0xE7, 0x07, - 0x16, 0x01, 0x8E, 0x00, 0xE7, 0x87, 0x01, 0x00, - 0x0E, 0xC0, 0x97, 0xCF, 0xD7, 0x09, 0x00, 0xC0, - 0xE7, 0x77, 0x01, 0x00, 0x92, 0xC0, 0x09, 0xC1, - 0xE7, 0x09, 0xFE, 0x05, 0x24, 0x01, 0xE7, 0x09, - 0x04, 0x06, 0x26, 0x01, 0xE7, 0x07, 0x07, 0x00, - 0x92, 0xC0, 0xE7, 0x05, 0x00, 0xC0, 0xC0, 0xDF, - 0x97, 0xCF, 0x17, 0x00, 0x57, 0x00, 0x17, 0x02, - 0xD7, 0x09, 0x00, 0xC0, 0xE7, 0x77, 0x01, 0x00, - 0x92, 0xC0, 0x0A, 0xC1, 0xE7, 0x57, 0xFF, 0xFF, - 0xFA, 0x05, 0x0D, 0xC0, 0xE7, 0x57, 0x00, 0x00, - 0xFA, 0x05, 0x0F, 0xC0, 0x9F, 0xAF, 0xC6, 0x00, - 0xE7, 0x05, 0x00, 0xC0, 0xC8, 0x05, 0xC1, 0x05, - 0xC0, 0x05, 0xC0, 0xDF, 0x97, 0xCF, 0x27, 0xDA, - 0xFA, 0x05, 0xEF, 0x07, 0x01, 0x00, 0x0B, 0x06, - 0x73, 0xCF, 0x9F, 0xAF, 0x78, 0x01, 0x9F, 0xAF, - 0x1A, 0x03, 0x6E, 0xCF, 0xE7, 0x09, 0xFC, 0x05, - 0x24, 0x01, 0xE7, 0x09, 0x02, 0x06, 0x26, 0x01, - 0xE7, 0x07, 0x07, 0x00, 0x92, 0xC0, 0xE7, 0x09, - 0xFC, 0x05, 0xFE, 0x05, 0xE7, 0x09, 0x02, 0x06, - 0x04, 0x06, 0xE7, 0x09, 0x00, 0x06, 0xFC, 0x05, - 0xE7, 0x09, 0xFE, 0x05, 0x00, 0x06, 0x27, 0xDA, - 0xFA, 0x05, 0xE7, 0x57, 0x01, 0x00, 0xFA, 0x05, - 0x02, 0xCA, 0x04, 0xC0, 0x97, 0xCF, 0x9F, 0xAF, - 0x66, 0x05, 0x97, 0xCF, 0xE7, 0x07, 0x40, 0x00, - 0x02, 0x06, 0xC8, 0x09, 0xFC, 0x05, 0x9F, 0xAF, - 0xDA, 0x02, 0x97, 0xCF, 0xCF, 0x17, 0x02, 0x00, - 0xEF, 0x57, 0x81, 0x00, 0x09, 0x06, 0x9F, 0xA0, - 0xB6, 0x01, 0xEF, 0x57, 0x80, 0x00, 0x09, 0x06, - 0x9F, 0xA0, 0x40, 0x02, 0xEF, 0x57, 0x01, 0x00, - 0x0B, 0x06, 0x9F, 0xA0, 0x46, 0x03, 0xE7, 0x07, - 0x01, 0x00, 0x0A, 0xC0, 0x46, 0xAF, 0x47, 0xAF, - 0x9F, 0xAF, 0x40, 0x02, 0xE7, 0x07, 0x2E, 0x00, - 0x0A, 0xC0, 0xEF, 0x87, 0x80, 0x00, 0x09, 0x06, - 0x97, 0xCF, 0x00, 0x0E, 0x01, 0x00, 0xC0, 0x57, - 0x51, 0x00, 0x9F, 0xC0, 0x9E, 0x02, 0xC0, 0x57, - 0x50, 0x00, 0x20, 0xC0, 0xC0, 0x57, 0x55, 0x00, - 0x12, 0xC0, 0xC0, 0x57, 0x56, 0x00, 0x9F, 0xC0, - 0x72, 0x02, 0x9F, 0xCF, 0xD6, 0x02, 0xC1, 0x0B, - 0x08, 0x06, 0x01, 0xD0, 0x6F, 0x90, 0x08, 0x06, - 0xC0, 0x07, 0x08, 0x00, 0xC1, 0x0B, 0x08, 0x06, - 0x9F, 0xAF, 0x28, 0x05, 0x97, 0xCF, 0x2F, 0x0E, - 0x02, 0x00, 0x08, 0x06, 0xC0, 0x07, 0x08, 0x00, - 0xC1, 0x0B, 0x08, 0x06, 0x9F, 0xAF, 0x28, 0x05, - 0x9F, 0xCF, 0xD6, 0x02, 0x2F, 0x0E, 0x02, 0x00, - 0x09, 0x06, 0xEF, 0x87, 0x80, 0x00, 0x09, 0x06, - 0x9F, 0xCF, 0xD6, 0x02, 0xEF, 0x67, 0x7F, 0xFF, - 0x09, 0x06, 0xE7, 0x67, 0xFF, 0xFD, 0x22, 0xC0, - 0xE7, 0x67, 0xEF, 0xFF, 0x24, 0xC0, 0xE7, 0x87, - 0x10, 0x00, 0x28, 0xC0, 0x9F, 0xAF, 0xB8, 0x05, - 0xE7, 0x87, 0xE0, 0x21, 0x24, 0xC0, 0x9F, 0xAF, - 0xA8, 0x05, 0xE7, 0x87, 0x08, 0x00, 0x24, 0xC0, - 0xE7, 0x67, 0xDF, 0xFF, 0x24, 0xC0, 0xC8, 0x07, - 0x0A, 0x00, 0xC0, 0x07, 0x00, 0x00, 0xC1, 0x07, - 0x01, 0x00, 0x9F, 0xAF, 0x28, 0x05, 0x9F, 0xAF, - 0xB8, 0x05, 0xC0, 0x07, 0x9E, 0x00, 0x9F, 0xAF, - 0x44, 0x05, 0xE7, 0x67, 0xFF, 0xFE, 0x24, 0xC0, - 0xC0, 0x09, 0x20, 0xC0, 0xE7, 0x87, 0x00, 0x01, - 0x24, 0xC0, 0xC0, 0x77, 0x00, 0x02, 0x0F, 0xC1, - 0xE7, 0x67, 0xF7, 0xFF, 0x24, 0xC0, 0xE7, 0x67, - 0xF7, 0xFF, 0x24, 0xC0, 0xE7, 0x87, 0x08, 0x00, - 0x24, 0xC0, 0x08, 0xDA, 0x5E, 0xC1, 0xEF, 0x07, - 0x80, 0x00, 0x09, 0x06, 0x97, 0xCF, 0xEF, 0x07, - 0x01, 0x00, 0x0A, 0x06, 0x97, 0xCF, 0xEF, 0x07, - 0x00, 0x00, 0x0B, 0x06, 0xEF, 0x07, 0x00, 0x00, - 0x0A, 0x06, 0xEF, 0x67, 0x7F, 0xFF, 0x09, 0x06, - 0xEF, 0x07, 0x00, 0x00, 0x0D, 0x06, 0xE7, 0x67, - 0xEF, 0xFF, 0x28, 0xC0, 0xE7, 0x67, 0x17, 0xD8, - 0x24, 0xC0, 0xE7, 0x07, 0x00, 0x00, 0x1E, 0xC0, - 0xE7, 0x07, 0xFF, 0xFF, 0x22, 0xC0, 0x97, 0xCF, - 0xC8, 0x07, 0x0E, 0x06, 0x9F, 0xAF, 0xDA, 0x02, - 0xE7, 0x07, 0x00, 0x00, 0xF2, 0x05, 0xE7, 0x07, - 0x10, 0x00, 0xF6, 0x05, 0xE7, 0x07, 0x0E, 0x06, - 0xF4, 0x05, 0xE7, 0x07, 0xD6, 0x02, 0xF8, 0x05, - 0xC8, 0x07, 0xF2, 0x05, 0xC1, 0x07, 0x00, 0x80, - 0x50, 0xAF, 0x97, 0xCF, 0x2F, 0x0C, 0x02, 0x00, - 0x07, 0x06, 0x2F, 0x0C, 0x04, 0x00, 0x06, 0x06, - 0xE7, 0x07, 0x00, 0x00, 0xF2, 0x05, 0xE7, 0x07, - 0x10, 0x00, 0xF6, 0x05, 0xE7, 0x07, 0xE2, 0x05, - 0xF4, 0x05, 0xE7, 0x07, 0xCE, 0x02, 0xF8, 0x05, - 0xC8, 0x07, 0xF2, 0x05, 0xC1, 0x07, 0x00, 0x80, - 0x51, 0xAF, 0x97, 0xCF, 0x9F, 0xAF, 0x66, 0x04, - 0x9F, 0xAF, 0x1A, 0x03, 0x59, 0xAF, 0x97, 0xCF, - 0xC0, 0x07, 0x0E, 0x00, 0xC1, 0x0B, 0x0C, 0x06, - 0x41, 0xD1, 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, - 0x3C, 0x00, 0x9F, 0xAF, 0x44, 0x05, 0x68, 0x00, - 0xC0, 0x07, 0x3B, 0x00, 0x9F, 0xAF, 0x44, 0x05, - 0x6F, 0x00, 0x0C, 0x06, 0x68, 0x00, 0xE0, 0x07, - 0x04, 0x01, 0xE8, 0x0B, 0x0A, 0x06, 0xE8, 0x07, - 0x00, 0x00, 0xE0, 0x07, 0x00, 0x02, 0xE0, 0x07, - 0xEC, 0x01, 0xE0, 0x07, 0xFC, 0xFF, 0x97, 0xCF, - 0xE7, 0x07, 0xFF, 0xFF, 0xFA, 0x05, 0xEF, 0x07, - 0x00, 0x00, 0x0B, 0x06, 0xE7, 0x07, 0x0E, 0x06, - 0x24, 0x01, 0xE7, 0x07, 0x0E, 0x06, 0xFE, 0x05, - 0xE7, 0x07, 0x40, 0x00, 0x26, 0x01, 0xE7, 0x07, - 0x40, 0x00, 0x04, 0x06, 0xE7, 0x07, 0x07, 0x00, - 0x92, 0xC0, 0x97, 0xCF, 0xEF, 0x07, 0x02, 0x00, - 0x0B, 0x06, 0x9F, 0xAF, 0x78, 0x01, 0xEF, 0x77, - 0x80, 0x00, 0x07, 0x06, 0x9F, 0xC0, 0x14, 0x04, - 0xEF, 0x77, 0x01, 0x00, 0x07, 0x06, 0x37, 0xC0, - 0xEF, 0x77, 0x01, 0x00, 0x0D, 0x06, 0x0F, 0xC1, - 0xEF, 0x07, 0x01, 0x00, 0x0D, 0x06, 0xC0, 0x07, - 0x02, 0x00, 0xC1, 0x07, 0x30, 0x00, 0x9F, 0xAF, - 0x28, 0x05, 0xC0, 0x07, 0x01, 0x00, 0xC1, 0x07, - 0x02, 0x00, 0x9F, 0xAF, 0x28, 0x05, 0xC8, 0x07, - 0xFF, 0x4F, 0x9F, 0xAF, 0xA8, 0x05, 0xC0, 0x07, - 0x38, 0x00, 0x9F, 0xAF, 0x44, 0x05, 0xC1, 0x77, - 0x03, 0x00, 0x02, 0xC1, 0x08, 0xDA, 0x75, 0xC1, - 0xC1, 0x77, 0x01, 0x00, 0x0A, 0xC1, 0xC0, 0x07, - 0x01, 0x00, 0xC1, 0x07, 0x02, 0x00, 0x9F, 0xAF, - 0x28, 0x05, 0xEF, 0x07, 0x01, 0x00, 0x06, 0x06, - 0x2C, 0xCF, 0xC0, 0x07, 0x01, 0x00, 0xC1, 0x07, - 0x04, 0x00, 0x9F, 0xAF, 0x28, 0x05, 0xEF, 0x07, - 0x00, 0x00, 0x06, 0x06, 0x22, 0xCF, 0xEF, 0x07, - 0x00, 0x00, 0x0D, 0x06, 0xEF, 0x57, 0x01, 0x00, - 0x06, 0x06, 0x1B, 0xC0, 0xC0, 0x07, 0x01, 0x00, - 0xC1, 0x07, 0x01, 0x00, 0x9F, 0xAF, 0x28, 0x05, - 0xC0, 0x07, 0x02, 0x00, 0xC1, 0x07, 0x30, 0x00, - 0x9F, 0xAF, 0x28, 0x05, 0xC8, 0x07, 0xFF, 0x4F, - 0x9F, 0xAF, 0xA8, 0x05, 0xC0, 0x07, 0x38, 0x00, - 0x9F, 0xAF, 0x44, 0x05, 0xC1, 0x67, 0x03, 0x00, - 0xC1, 0x57, 0x03, 0x00, 0x02, 0xC0, 0x08, 0xDA, - 0x73, 0xC1, 0xC0, 0x07, 0x02, 0x00, 0xC1, 0x07, - 0x12, 0x00, 0xEF, 0x57, 0x00, 0x00, 0x06, 0x06, - 0x02, 0xC0, 0xC1, 0x07, 0x23, 0x00, 0x9F, 0xAF, - 0x28, 0x05, 0xC0, 0x07, 0x14, 0x00, 0xC1, 0x0B, - 0xEA, 0x05, 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, - 0x3E, 0x00, 0x9F, 0xAF, 0x0A, 0x05, 0xE7, 0x09, - 0xE4, 0x05, 0xFA, 0x05, 0x27, 0xD8, 0xFA, 0x05, - 0xE7, 0x07, 0x0E, 0x06, 0xFC, 0x05, 0xE7, 0x07, - 0x4E, 0x06, 0x00, 0x06, 0xE7, 0x07, 0x40, 0x00, - 0x02, 0x06, 0x9F, 0xAF, 0x66, 0x05, 0x9F, 0xAF, - 0xC6, 0x00, 0x97, 0xCF, 0xC1, 0x0B, 0xE2, 0x05, - 0x41, 0xD0, 0x01, 0xD2, 0xC1, 0x17, 0x23, 0x00, - 0x9F, 0xAF, 0xDC, 0x04, 0xC0, 0x07, 0x04, 0x00, - 0xC1, 0x0B, 0xE3, 0x05, 0x9F, 0xAF, 0x28, 0x05, - 0xC0, 0x07, 0x06, 0x00, 0xC1, 0x09, 0xE6, 0x05, - 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, 0x07, 0x00, - 0xC1, 0x09, 0xE6, 0x05, 0xC1, 0xD1, 0x9F, 0xAF, - 0x28, 0x05, 0xC0, 0x07, 0x0B, 0x00, 0xC1, 0x09, - 0xE8, 0x05, 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, - 0x0C, 0x00, 0xC1, 0x09, 0xE8, 0x05, 0xC1, 0xD1, - 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, 0x0D, 0x00, - 0xC1, 0x07, 0x09, 0x00, 0x9F, 0xAF, 0x28, 0x05, - 0xC0, 0x07, 0x03, 0x00, 0xC1, 0x07, 0x32, 0x00, - 0x9F, 0xAF, 0x28, 0x05, 0xC0, 0x07, 0x0F, 0x00, - 0xC1, 0x07, 0x00, 0x00, 0x9F, 0xAF, 0x28, 0x05, - 0x97, 0xCF, 0xE7, 0x67, 0xFF, 0xD9, 0x24, 0xC0, - 0xC8, 0x07, 0x0A, 0x00, 0x40, 0x00, 0xC0, 0x67, - 0x00, 0x02, 0x27, 0x80, 0x24, 0xC0, 0xE7, 0x87, - 0x00, 0x04, 0x24, 0xC0, 0xE7, 0x67, 0xFF, 0xF9, - 0x24, 0xC0, 0x01, 0xD2, 0x08, 0xDA, 0x72, 0xC1, - 0xE7, 0x87, 0x00, 0x20, 0x24, 0xC0, 0x97, 0xCF, - 0x27, 0x00, 0x1E, 0xC0, 0xE7, 0x87, 0xFF, 0x00, - 0x22, 0xC0, 0xE7, 0x67, 0x7F, 0xFF, 0x24, 0xC0, - 0xE7, 0x87, 0x80, 0x00, 0x24, 0xC0, 0xE7, 0x87, - 0x80, 0x00, 0x24, 0xC0, 0x97, 0xCF, 0x9F, 0xAF, - 0x0A, 0x05, 0x67, 0x00, 0x1E, 0xC0, 0xE7, 0x67, - 0xBF, 0xFF, 0x24, 0xC0, 0xE7, 0x87, 0x40, 0x00, - 0x24, 0xC0, 0xE7, 0x87, 0x40, 0x00, 0x24, 0xC0, - 0x97, 0xCF, 0x9F, 0xAF, 0x0A, 0x05, 0xE7, 0x67, - 0x00, 0xFF, 0x22, 0xC0, 0xE7, 0x67, 0xFF, 0xFE, - 0x24, 0xC0, 0xE7, 0x67, 0xFF, 0xFE, 0x24, 0xC0, - 0xC1, 0x09, 0x20, 0xC0, 0xE7, 0x87, 0x00, 0x01, - 0x24, 0xC0, 0x97, 0xCF, 0xC0, 0x07, 0x40, 0x00, - 0xC8, 0x09, 0xFC, 0x05, 0xE7, 0x67, 0x00, 0xFF, - 0x22, 0xC0, 0xE7, 0x67, 0xFF, 0xFE, 0x24, 0xC0, - 0xE7, 0x67, 0xBF, 0xFF, 0x24, 0xC0, 0xE7, 0x67, - 0xBF, 0xFF, 0x24, 0xC0, 0x00, 0xDA, 0xE8, 0x09, - 0x20, 0xC0, 0xE7, 0x87, 0x40, 0x00, 0x24, 0xC0, - 0xE7, 0x87, 0x40, 0x00, 0x24, 0xC0, 0x00, 0xDA, - 0xE8, 0x09, 0x20, 0xC0, 0x6D, 0xC1, 0xE7, 0x87, - 0x00, 0x01, 0x24, 0xC0, 0x97, 0xCF, 0xE7, 0x07, - 0x32, 0x00, 0x12, 0xC0, 0xE7, 0x77, 0x00, 0x80, - 0x12, 0xC0, 0x7C, 0xC0, 0x97, 0xCF, 0xE7, 0x07, - 0x20, 0x4E, 0x12, 0xC0, 0xE7, 0x77, 0x00, 0x80, - 0x12, 0xC0, 0x7C, 0xC0, 0x97, 0xCF, 0x09, 0x02, - 0x19, 0x00, 0x01, 0x01, 0x00, 0x80, 0x96, 0x09, - 0x04, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, - 0x07, 0x05, 0x81, 0x02, 0x40, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -}; - -static unsigned char setup5[] = { - 0xB6, 0xC3, 0x2F, 0x01, 0x03, 0x64, 0x0E, 0x00, - 0x14, 0x00, 0x1A, 0x00, 0x20, 0x00, 0x26, 0x00, - 0x4A, 0x00, 0x64, 0x00, 0x6A, 0x00, 0x92, 0x00, - 0x9A, 0x00, 0xA0, 0x00, 0xB2, 0x00, 0xB8, 0x00, - 0xBE, 0x00, 0xC2, 0x00, 0xC8, 0x00, 0xCE, 0x00, - 0xDC, 0x00, 0xDA, 0x00, 0xE2, 0x00, 0xE0, 0x00, - 0xE8, 0x00, 0xE6, 0x00, 0xEE, 0x00, 0xEC, 0x00, - 0xF2, 0x00, 0xF8, 0x00, 0x02, 0x01, 0x0A, 0x01, - 0x0E, 0x01, 0x12, 0x01, 0x1E, 0x01, 0x22, 0x01, - 0x28, 0x01, 0x2C, 0x01, 0x32, 0x01, 0x36, 0x01, - 0x44, 0x01, 0x50, 0x01, 0x5E, 0x01, 0x72, 0x01, - 0x76, 0x01, 0x7A, 0x01, 0x80, 0x01, 0x88, 0x01, - 0x8C, 0x01, 0x94, 0x01, 0x9C, 0x01, 0xA0, 0x01, - 0xA4, 0x01, 0xAA, 0x01, 0xB0, 0x01, 0xB4, 0x01, - 0xBA, 0x01, 0xD0, 0x01, 0xDA, 0x01, 0xF6, 0x01, - 0xFA, 0x01, 0x02, 0x02, 0x34, 0x02, 0x3C, 0x02, - 0x44, 0x02, 0x4A, 0x02, 0x50, 0x02, 0x56, 0x02, - 0x74, 0x02, 0x78, 0x02, 0x7E, 0x02, 0x84, 0x02, - 0x8A, 0x02, 0x88, 0x02, 0x90, 0x02, 0x8E, 0x02, - 0x94, 0x02, 0xA2, 0x02, 0xA8, 0x02, 0xAE, 0x02, - 0xB4, 0x02, 0xBA, 0x02, 0xB8, 0x02, 0xC0, 0x02, - 0xBE, 0x02, 0xC4, 0x02, 0xD0, 0x02, 0xD4, 0x02, - 0xE0, 0x02, 0xE6, 0x02, 0xEE, 0x02, 0xF8, 0x02, - 0xFC, 0x02, 0x06, 0x03, 0x1E, 0x03, 0x24, 0x03, - 0x28, 0x03, 0x30, 0x03, 0x2E, 0x03, 0x3C, 0x03, - 0x4A, 0x03, 0x4E, 0x03, 0x54, 0x03, 0x58, 0x03, - 0x5E, 0x03, 0x66, 0x03, 0x6E, 0x03, 0x7A, 0x03, - 0x86, 0x03, 0x8E, 0x03, 0x96, 0x03, 0xB2, 0x03, - 0xB8, 0x03, 0xC6, 0x03, 0xCC, 0x03, 0xD4, 0x03, - 0xDA, 0x03, 0xE8, 0x03, 0xF4, 0x03, 0xFC, 0x03, - 0x04, 0x04, 0x20, 0x04, 0x2A, 0x04, 0x32, 0x04, - 0x36, 0x04, 0x3E, 0x04, 0x44, 0x04, 0x42, 0x04, - 0x48, 0x04, 0x4E, 0x04, 0x4C, 0x04, 0x54, 0x04, - 0x52, 0x04, 0x5A, 0x04, 0x5E, 0x04, 0x62, 0x04, - 0x68, 0x04, 0x74, 0x04, 0x7C, 0x04, 0x80, 0x04, - 0x88, 0x04, 0x8C, 0x04, 0x94, 0x04, 0x9A, 0x04, - 0xA2, 0x04, 0xA6, 0x04, 0xAE, 0x04, 0xB4, 0x04, - 0xC0, 0x04, 0xCC, 0x04, 0xD8, 0x04, 0x2A, 0x05, - 0x46, 0x05, 0x6C, 0x05, 0x00, 0x00 -}; - /* rvmalloc / rvfree copied from usbvideo.c * * Not sure why these are not yet non-statics which I can reference through @@ -464,28 +188,28 @@ static int send_control_msg(struct vicam_camera *cam, static int initialize_camera(struct vicam_camera *cam) { - const struct { - u8 *data; - u32 size; - } firmware[] = { - { .data = setup1, .size = sizeof(setup1) }, - { .data = setup2, .size = sizeof(setup2) }, - { .data = setup3, .size = sizeof(setup3) }, - { .data = setup4, .size = sizeof(setup4) }, - { .data = setup5, .size = sizeof(setup5) }, - { .data = setup3, .size = sizeof(setup3) }, - { .data = NULL, .size = 0 } - }; - - int err, i; - - for (i = 0, err = 0; firmware[i].data && !err; i++) { - memcpy(cam->cntrlbuf, firmware[i].data, firmware[i].size); + int err; + const struct ihex_binrec *rec; + const struct firmware *fw; + + err = request_ihex_firmware(&fw, "vicam/firmware.fw", &cam->udev->dev); + if (err) { + printk(KERN_ERR "Failed to load \"vicam/firmware.fw\": %d\n", + err); + return err; + } + + for (rec = (void *)fw->data; rec; rec = ihex_next_binrec(rec)) { + memcpy(cam->cntrlbuf, rec->data, be16_to_cpu(rec->len)); err = send_control_msg(cam, 0xff, 0, 0, - cam->cntrlbuf, firmware[i].size); + cam->cntrlbuf, be16_to_cpu(rec->len)); + if (err) + break; } + release_firmware(fw); + return err; } @@ -1226,3 +950,4 @@ module_exit(usb_vicam_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("vicam/firmware.fw"); diff --git a/firmware/Makefile b/firmware/Makefile index 331d10cf6518..5ed36ae1a414 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -63,6 +63,7 @@ fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \ # whiteheat_loader_debug.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw +fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-) diff --git a/firmware/WHENCE b/firmware/WHENCE index 878456572926..b14b86c8fb51 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -265,3 +265,13 @@ Licence: Distributable * modification. -------------------------------------------------------------------------- + +Driver: USB_VICAM -- USB 3com HomeConnect (aka vicam) + +File: vicam/firmware.fw + +Licence: Unknown + +Found in hex form in kernel source. + +-------------------------------------------------------------------------- diff --git a/firmware/vicam/firmware.H16 b/firmware/vicam/firmware.H16 new file mode 100644 index 000000000000..cac0cba68cc7 --- /dev/null +++ b/firmware/vicam/firmware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cgit v1.2.3 From 5b9ea9322605da09d6f7119f03f71cc52b044911 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Date: Thu, 3 Jul 2008 17:00:23 +0530 Subject: edgeport: use request_firmware() Version number provided in first HEX record. Signed-off-by: Jaswinder Singh Signed-off-by: David Woodhouse --- drivers/usb/serial/io_edgeport.c | 183 +++--- drivers/usb/serial/io_fw_boot.h | 556 ----------------- drivers/usb/serial/io_fw_boot2.h | 546 ----------------- drivers/usb/serial/io_fw_down.h | 1229 -------------------------------------- drivers/usb/serial/io_fw_down2.h | 1133 ----------------------------------- firmware/Makefile | 2 + firmware/WHENCE | 18 + firmware/edgeport/boot.H16 | 29 + firmware/edgeport/boot2.H16 | 28 + firmware/edgeport/down.H16 | 29 + firmware/edgeport/down2.H16 | 29 + 11 files changed, 225 insertions(+), 3557 deletions(-) delete mode 100644 drivers/usb/serial/io_fw_boot.h delete mode 100644 drivers/usb/serial/io_fw_boot2.h delete mode 100644 drivers/usb/serial/io_fw_down.h delete mode 100644 drivers/usb/serial/io_fw_down2.h create mode 100644 firmware/edgeport/boot.H16 create mode 100644 firmware/edgeport/boot2.H16 create mode 100644 firmware/edgeport/down.H16 create mode 100644 firmware/edgeport/down2.H16 diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 06b52f4098f1..2fd449bcfa35 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -42,6 +42,8 @@ #include #include #include +#include +#include #include #include #include @@ -56,26 +58,6 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman and David Iacovelli" #define DRIVER_DESC "Edgeport USB Serial Driver" -/* First, the latest boot code - for first generation edgeports */ -#define IMAGE_ARRAY_NAME BootCodeImage_GEN1 -#define IMAGE_VERSION_NAME BootCodeImageVersion_GEN1 -#include "io_fw_boot.h" /* the bootloader firmware to download to a device, if it needs it */ - -/* for second generation edgeports */ -#define IMAGE_ARRAY_NAME BootCodeImage_GEN2 -#define IMAGE_VERSION_NAME BootCodeImageVersion_GEN2 -#include "io_fw_boot2.h" /* the bootloader firmware to download to a device, if it needs it */ - -/* Then finally the main run-time operational code - for first generation edgeports */ -#define IMAGE_ARRAY_NAME OperationalCodeImage_GEN1 -#define IMAGE_VERSION_NAME OperationalCodeImageVersion_GEN1 -#include "io_fw_down.h" /* Define array OperationalCodeImage[] */ - -/* for second generation edgeports */ -#define IMAGE_ARRAY_NAME OperationalCodeImage_GEN2 -#define IMAGE_VERSION_NAME OperationalCodeImageVersion_GEN2 -#include "io_fw_down2.h" /* Define array OperationalCodeImage[] */ - #define MAX_NAME_LEN 64 #define CHASE_TIMEOUT (5*HZ) /* 5 seconds */ @@ -256,9 +238,9 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer, int writeLength); static void send_more_port_data (struct edgeport_serial *edge_serial, struct edgeport_port *edge_port); -static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data); +static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data); static int rom_read (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data); -static int rom_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data); +static int rom_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data); static void get_manufacturing_desc (struct edgeport_serial *edge_serial); static void get_boot_desc (struct edgeport_serial *edge_serial); static void load_application_firmware (struct edgeport_serial *edge_serial); @@ -283,37 +265,41 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial) { __u32 BootCurVer; __u32 BootNewVer; - __u8 BootMajorVersion; - __u8 BootMinorVersion; - __le16 BootBuildNumber; - __u8 *BootImage; - __u32 BootSize; - struct edge_firmware_image_record *record; - unsigned char *firmware; + __u8 BootMajorVersion; + __u8 BootMinorVersion; + __u16 BootBuildNumber; + __u32 Bootaddr; + const struct ihex_binrec *rec; + const struct firmware *fw; + const char *fw_name; int response; - switch (edge_serial->product_info.iDownloadFile) { case EDGE_DOWNLOAD_FILE_I930: - BootMajorVersion = BootCodeImageVersion_GEN1.MajorVersion; - BootMinorVersion = BootCodeImageVersion_GEN1.MinorVersion; - BootBuildNumber = cpu_to_le16(BootCodeImageVersion_GEN1.BuildNumber); - BootImage = &BootCodeImage_GEN1[0]; - BootSize = sizeof( BootCodeImage_GEN1 ); + fw_name = "edgeport/boot.fw"; break; case EDGE_DOWNLOAD_FILE_80251: - BootMajorVersion = BootCodeImageVersion_GEN2.MajorVersion; - BootMinorVersion = BootCodeImageVersion_GEN2.MinorVersion; - BootBuildNumber = cpu_to_le16(BootCodeImageVersion_GEN2.BuildNumber); - BootImage = &BootCodeImage_GEN2[0]; - BootSize = sizeof( BootCodeImage_GEN2 ); + fw_name = "edgeport/boot2.fw"; break; default: return; } + response = request_ihex_firmware(&fw, fw_name, + &edge_serial->serial->dev->dev); + if (response) { + printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + fw_name, response); + return; + } + + rec = (const struct ihex_binrec *)fw->data; + BootMajorVersion = rec->data[0]; + BootMinorVersion = rec->data[1]; + BootBuildNumber = (rec->data[2] << 8) | rec->data[3]; + // Check Boot Image Version BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) + (edge_serial->boot_descriptor.MinorVersion << 16) + @@ -321,7 +307,7 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial) BootNewVer = (BootMajorVersion << 24) + (BootMinorVersion << 16) + - le16_to_cpu(BootBuildNumber); + BootBuildNumber; dbg("Current Boot Image version %d.%d.%d", edge_serial->boot_descriptor.MajorVersion, @@ -334,30 +320,30 @@ static void update_edgeport_E2PROM (struct edgeport_serial *edge_serial) edge_serial->boot_descriptor.MajorVersion, edge_serial->boot_descriptor.MinorVersion, le16_to_cpu(edge_serial->boot_descriptor.BuildNumber), - BootMajorVersion, - BootMinorVersion, - le16_to_cpu(BootBuildNumber)); - + BootMajorVersion, BootMinorVersion, BootBuildNumber); dbg("Downloading new Boot Image"); - firmware = BootImage; - - for (;;) { - record = (struct edge_firmware_image_record *)firmware; - response = rom_write (edge_serial->serial, le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len), &record->Data[0]); + for (rec = ihex_next_binrec(rec); rec; + rec = ihex_next_binrec(rec)) { + Bootaddr = be32_to_cpu(rec->addr); + response = rom_write(edge_serial->serial, + Bootaddr >> 16, + Bootaddr & 0xFFFF, + be16_to_cpu(rec->len), + &rec->data[0]); if (response < 0) { - dev_err(&edge_serial->serial->dev->dev, "rom_write failed (%x, %x, %d)\n", le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len)); - break; - } - firmware += sizeof (struct edge_firmware_image_record) + le16_to_cpu(record->Len); - if (firmware >= &BootImage[BootSize]) { + dev_err(&edge_serial->serial->dev->dev, + "rom_write failed (%x, %x, %d)\n", + Bootaddr >> 16, Bootaddr & 0xFFFF, + be16_to_cpu(rec->len)); break; } } } else { dbg("Boot Image -- already up to date"); } + release_firmware(fw); } @@ -447,9 +433,6 @@ static void dump_product_info(struct edgeport_product_info *product_info) dbg(" BootMajorVersion %d.%d.%d", product_info->BootMajorVersion, product_info->BootMinorVersion, le16_to_cpu(product_info->BootBuildNumber)); - dbg(" FirmwareMajorVersion %d.%d.%d", product_info->FirmwareMajorVersion, - product_info->FirmwareMinorVersion, - le16_to_cpu(product_info->FirmwareBuildNumber)); dbg(" ManufactureDescDate %d/%d/%d", product_info->ManufactureDescDate[0], product_info->ManufactureDescDate[1], product_info->ManufactureDescDate[2]+1900); @@ -480,14 +463,8 @@ static void get_product_info(struct edgeport_serial *edge_serial) // check if this is 2nd generation hardware if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ION_DEVICE_ID_80251_NETCHIP) { - product_info->FirmwareMajorVersion = OperationalCodeImageVersion_GEN2.MajorVersion; - product_info->FirmwareMinorVersion = OperationalCodeImageVersion_GEN2.MinorVersion; - product_info->FirmwareBuildNumber = cpu_to_le16(OperationalCodeImageVersion_GEN2.BuildNumber); product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251; } else { - product_info->FirmwareMajorVersion = OperationalCodeImageVersion_GEN1.MajorVersion; - product_info->FirmwareMinorVersion = OperationalCodeImageVersion_GEN1.MinorVersion; - product_info->FirmwareBuildNumber = cpu_to_le16(OperationalCodeImageVersion_GEN1.BuildNumber); product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930; } @@ -2130,7 +2107,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, __u8 l * If successful returns the number of bytes written, otherwise it returns * a negative error number of the problem. ****************************************************************************/ -static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data) +static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data) { int result; __u16 current_length; @@ -2175,7 +2152,7 @@ static int sram_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u * If successful returns the number of bytes written, otherwise it returns * a negative error number of the problem. ****************************************************************************/ -static int rom_write (struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, __u8 *data) +static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, __u16 length, const __u8 *data) { int result; __u16 current_length; @@ -2761,32 +2738,23 @@ static void get_boot_desc (struct edgeport_serial *edge_serial) ****************************************************************************/ static void load_application_firmware (struct edgeport_serial *edge_serial) { - struct edge_firmware_image_record *record; - unsigned char *firmware; - unsigned char *FirmwareImage; - int ImageSize; + const struct ihex_binrec *rec; + const struct firmware *fw; + const char *fw_name; + const char *fw_info; int response; - + __u32 Operaddr; + __u16 build; switch (edge_serial->product_info.iDownloadFile) { case EDGE_DOWNLOAD_FILE_I930: - dbg("downloading firmware version (930) %d.%d.%d", - OperationalCodeImageVersion_GEN1.MajorVersion, - OperationalCodeImageVersion_GEN1.MinorVersion, - OperationalCodeImageVersion_GEN1.BuildNumber); - firmware = &OperationalCodeImage_GEN1[0]; - FirmwareImage = &OperationalCodeImage_GEN1[0]; - ImageSize = sizeof(OperationalCodeImage_GEN1); + fw_info = "downloading firmware version (930)"; + fw_name = "edgeport/down.fw"; break; case EDGE_DOWNLOAD_FILE_80251: - dbg("downloading firmware version (80251) %d.%d.%d", - OperationalCodeImageVersion_GEN2.MajorVersion, - OperationalCodeImageVersion_GEN2.MinorVersion, - OperationalCodeImageVersion_GEN2.BuildNumber); - firmware = &OperationalCodeImage_GEN2[0]; - FirmwareImage = &OperationalCodeImage_GEN2[0]; - ImageSize = sizeof(OperationalCodeImage_GEN2); + fw_info = "downloading firmware version (80251)"; + fw_name = "edgeport/down2.fw"; break; case EDGE_DOWNLOAD_FILE_NONE: @@ -2797,16 +2765,36 @@ static void load_application_firmware (struct edgeport_serial *edge_serial) return; } + response = request_ihex_firmware(&fw, fw_name, + &edge_serial->serial->dev->dev); + if (response) { + printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + fw_name, response); + return; + } + + rec = (const struct ihex_binrec *)fw->data; + build = (rec->data[2] << 8) | rec->data[3]; + + dbg("%s %d.%d.%d", fw_info, rec->data[0], rec->data[1], build); + + edge_serial->product_info.FirmwareMajorVersion = fw->data[0]; + edge_serial->product_info.FirmwareMinorVersion = fw->data[1]; + edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build); - for (;;) { - record = (struct edge_firmware_image_record *)firmware; - response = sram_write (edge_serial->serial, le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len), &record->Data[0]); + for (rec = ihex_next_binrec(rec); rec; + rec = ihex_next_binrec(rec)) { + Operaddr = be32_to_cpu(rec->addr); + response = sram_write(edge_serial->serial, + Operaddr >> 16, + Operaddr & 0xFFFF, + be16_to_cpu(rec->len), + &rec->data[0]); if (response < 0) { - dev_err(&edge_serial->serial->dev->dev, "sram_write failed (%x, %x, %d)\n", le16_to_cpu(record->ExtAddr), le16_to_cpu(record->Addr), le16_to_cpu(record->Len)); - break; - } - firmware += sizeof (struct edge_firmware_image_record) + le16_to_cpu(record->Len); - if (firmware >= &FirmwareImage[ImageSize]) { + dev_err(&edge_serial->serial->dev->dev, + "sram_write failed (%x, %x, %d)\n", + Operaddr >> 16, Operaddr & 0xFFFF, + be16_to_cpu(rec->len)); break; } } @@ -2817,6 +2805,7 @@ static void load_application_firmware (struct edgeport_serial *edge_serial) USB_REQUEST_ION_EXEC_DL_CODE, 0x40, 0x4000, 0x0001, NULL, 0, 3000); + release_firmware(fw); return; } @@ -2903,6 +2892,10 @@ static int edge_startup (struct usb_serial *serial) // dbg("set_configuration 1"); // usb_set_configuration (dev, 1); } + dbg(" FirmwareMajorVersion %d.%d.%d", + edge_serial->product_info.FirmwareMajorVersion, + edge_serial->product_info.FirmwareMinorVersion, + le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber)); /* we set up the pointers to the endpoints in the edge_open function, * as the structures aren't created yet. */ @@ -3115,6 +3108,10 @@ module_exit(edgeport_exit); MODULE_AUTHOR( DRIVER_AUTHOR ); MODULE_DESCRIPTION( DRIVER_DESC ); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("edgeport/boot.fw"); +MODULE_FIRMWARE("edgeport/boot2.fw"); +MODULE_FIRMWARE("edgeport/down.fw"); +MODULE_FIRMWARE("edgeport/down2.fw"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/io_fw_boot.h b/drivers/usb/serial/io_fw_boot.h deleted file mode 100644 index 099fafaf52bb..000000000000 --- a/drivers/usb/serial/io_fw_boot.h +++ /dev/null @@ -1,556 +0,0 @@ -//************************************************************** -//* Edgeport/4 Binary Image -//* Generated by HEX2C v1.06 -//* Copyright (C) 1998 Inside Out Networks, All rights reserved. -//* This program is free software; you can redistribute it and/or modify -//* it under the terms of the GNU General Public License as published by -//* the Free Software Foundation; either version 2 of the License, or -//* (at your option) any later version. -//************************************************************** - - -//Image structure definition -#if !defined(DEFINED_EDGE_FIRMWARE_IMAGE_RECORD) -#define DEFINED_EDGE_FIRMWARE_IMAGE_RECORD - struct edge_firmware_image_record { - __le16 ExtAddr; - __le16 Addr; - __le16 Len; - unsigned char Data[0]; - } __attribute__ ((packed)); - - struct edge_firmware_version_info { - unsigned char MajorVersion; - unsigned char MinorVersion; - unsigned short BuildNumber; - }; - -#endif - -#if !defined(IMAGE_ARRAY_NAME) -#define IMAGE_ARRAY_NAME FirmwareImage -#define IMAGE_VERSION_NAME FirmwareImageVersion -#endif - -static unsigned char IMAGE_ARRAY_NAME[] = { - -// Segment #1, Start Address 00ff0000, Length 6 -0xff,0x00,0x00,0x00,0x06,0x00, - 0x02, 0x00, 0x80, 0x02, 0x00, 0x03, - -// Segment #2, Start Address 00ff000b, Length 3 -0xff,0x00,0x0b,0x00,0x03,0x00, - 0x02, 0x00, 0x0b, - -// Segment #3, Start Address 00ff0013, Length 3 -0xff,0x00,0x13,0x00,0x03,0x00, - 0x02, 0x01, 0xb8, - -// Segment #4, Start Address 00ff001b, Length 3 -0xff,0x00,0x1b,0x00,0x03,0x00, - 0x02, 0x00, 0x1b, - -// Segment #5, Start Address 00ff0023, Length 3 -0xff,0x00,0x23,0x00,0x03,0x00, - 0x02, 0x00, 0x23, - -// Segment #6, Start Address 00ff002b, Length 3 -0xff,0x00,0x2b,0x00,0x03,0x00, - 0x02, 0x00, 0x2b, - -// Segment #7, Start Address 00ff0033, Length 3 -0xff,0x00,0x33,0x00,0x03,0x00, - 0x02, 0x00, 0x33, - -// Segment #8, Start Address 00ff003b, Length 3 -0xff,0x00,0x3b,0x00,0x03,0x00, - 0x02, 0x00, 0x3b, - -// Segment #9, Start Address 00ff0043, Length 3 -0xff,0x00,0x43,0x00,0x03,0x00, - 0x02, 0x01, 0xbd, - -// Segment #10, Start Address 00ff004b, Length 3 -0xff,0x00,0x4b,0x00,0x03,0x00, - 0x02, 0x01, 0xd0, - -// Segment #11, Start Address 00ff0053, Length 3 -0xff,0x00,0x53,0x00,0x03,0x00, - 0x02, 0x01, 0x21, - -// Segment #12, Start Address 00ff007b, Length 3 -0xff,0x00,0x7b,0x00,0x03,0x00, - 0x02, 0x00, 0x7b, - -// Segment #13, Start Address 00ff0080, Length 358 -0xff,0x00,0x80,0x00,0x66,0x01, - 0x7e, 0xb0, 0x00, 0x7a, 0xb3, 0x3f, 0xf2, 0x7e, 0xf8, 0x00, 0x23, 0x7e, 0x00, 0x01, 0x7e, 0x10, - 0x00, 0x12, 0x07, 0x5f, 0x69, 0x20, 0x00, 0x0a, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x05, 0x75, 0x90, - 0x0d, 0x80, 0x03, 0x75, 0x90, 0x1d, 0xd2, 0xb5, 0x7e, 0x00, 0x00, 0xa5, 0xd8, 0xfd, 0x75, 0xa8, - 0x00, 0x75, 0xb1, 0x00, 0xa9, 0xd5, 0x87, 0xca, 0x29, 0x12, 0x09, 0xcc, 0x12, 0x09, 0xa0, 0xf5, - 0x09, 0x7a, 0xa1, 0x20, 0x12, 0x01, 0xe6, 0xda, 0x29, 0xa9, 0xd0, 0xc7, 0x7e, 0x00, 0x05, 0x7a, - 0x01, 0xf1, 0x75, 0xe1, 0x10, 0xa9, 0xd7, 0xf4, 0xa9, 0xd7, 0xe4, 0xa5, 0xd8, 0xf1, 0x75, 0xf1, - 0x00, 0x75, 0xe1, 0x3f, 0x75, 0xa2, 0x03, 0x75, 0xa3, 0x00, 0x75, 0xc0, 0x00, 0x75, 0xc1, 0x00, - 0xa9, 0xd1, 0xb1, 0xa9, 0xd0, 0xb1, 0xa9, 0xd5, 0xd3, 0xd2, 0xaf, 0xe4, 0x7e, 0x04, 0x28, 0x00, - 0x8d, 0xef, 0x1b, 0x04, 0x78, 0xfa, 0x04, 0xa9, 0x34, 0xd3, 0x03, 0x30, 0xe0, 0xee, 0xbe, 0x24, - 0x00, 0x00, 0x78, 0x05, 0x63, 0x90, 0x30, 0x80, 0xe3, 0xb2, 0x95, 0x80, 0xdf, 0xbe, 0xb0, 0x02, - 0x22, 0xc0, 0xd0, 0xa9, 0x20, 0xdf, 0x0f, 0xa9, 0x31, 0xdf, 0x03, 0x02, 0x01, 0xb5, 0x75, 0x08, - 0x01, 0x12, 0x08, 0x33, 0x80, 0xfe, 0x75, 0x08, 0xfe, 0x12, 0x08, 0x33, 0x75, 0xa8, 0x00, 0x7e, - 0xb3, 0x3f, 0xf2, 0x30, 0xe0, 0x4b, 0x30, 0x01, 0x46, 0xc2, 0x92, 0x7e, 0x24, 0x80, 0x00, 0x7e, - 0x11, 0x09, 0x74, 0x08, 0x19, 0xb2, 0x00, 0x10, 0x74, 0x0e, 0x19, 0xb2, 0x00, 0x04, 0x2e, 0x24, - 0x01, 0x00, 0xa5, 0xd9, 0xed, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x09, 0xe4, 0xd5, 0xe0, 0xfd, - 0x09, 0xb2, 0x00, 0x08, 0x20, 0xe0, 0x0a, 0x09, 0xb2, 0x00, 0x00, 0x09, 0xb2, 0x00, 0x18, 0x80, - 0xeb, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xe4, 0x43, 0x90, 0x30, 0xd2, 0xaa, 0x80, 0x05, 0xd2, - 0xaa, 0x43, 0x90, 0x34, 0xd2, 0xaf, 0xa9, 0xd1, 0x87, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa9, 0x11, - 0xdf, 0x03, 0xa9, 0xd2, 0xdf, 0x75, 0x08, 0xff, 0x12, 0x08, 0x33, 0xc0, 0xd1, 0xca, 0x02, 0xff, - 0xca, 0x06, 0x83, 0x00, 0x32, 0xd0, 0xd0, 0x32, 0xc2, 0x8b, 0xc2, 0xaa, 0x32, 0x75, 0x08, 0x08, - 0x12, 0x08, 0x33, 0xa9, 0xc0, 0xb1, 0xa9, 0xc5, 0xd3, 0xa9, 0xc6, 0xd3, 0xa9, 0xd2, 0xb1, 0x32, - 0xca, 0xb8, 0x75, 0x08, 0x02, 0x12, 0x08, 0x33, 0xe5, 0xc0, 0x54, 0x03, 0x68, 0x05, 0x12, 0x01, - 0xee, 0x80, 0xf5, 0xda, 0xb8, 0x32, - -// Segment #14, Start Address 00ff1bca, Length 1 -0xff,0x00,0xca,0x1b,0x01,0x00, - 0x00, - -// Segment #15, Start Address 00ff01e6, Length 1613 -0xff,0x00,0xe6,0x01,0x4d,0x06, - 0xe4, 0x7a, 0xb3, 0x3f, 0xf1, 0x02, 0x02, 0x63, 0xca, 0x0b, 0xca, 0x1b, 0xca, 0x2b, 0xca, 0x3b, - 0xca, 0x4b, 0xca, 0x5b, 0xca, 0x6b, 0xca, 0x7b, 0xca, 0xeb, 0xc0, 0xf1, 0x7e, 0xb3, 0x01, 0x2b, - 0xb4, 0x00, 0x02, 0x80, 0x19, 0xb4, 0x01, 0x16, 0x30, 0xc0, 0x08, 0x75, 0xf1, 0x00, 0x12, 0x02, - 0x4d, 0x80, 0x1f, 0x30, 0xc1, 0x1c, 0x75, 0xf1, 0x00, 0x12, 0x02, 0xde, 0x80, 0x14, 0x30, 0xc1, - 0x08, 0x75, 0xf1, 0x00, 0x12, 0x02, 0xde, 0x80, 0x09, 0x30, 0xc0, 0x06, 0x75, 0xf1, 0x00, 0x12, - 0x02, 0x4d, 0xd0, 0xf1, 0xda, 0xeb, 0xda, 0x7b, 0xda, 0x6b, 0xda, 0x5b, 0xda, 0x4b, 0xda, 0x3b, - 0xda, 0x2b, 0xda, 0x1b, 0xda, 0x0b, 0x22, 0xc2, 0xc0, 0x7e, 0xb3, 0x01, 0x2b, 0xb4, 0x02, 0x07, - 0x12, 0x02, 0x6f, 0x02, 0x02, 0x63, 0x22, 0xb4, 0x01, 0xfc, 0x02, 0x02, 0xa9, 0x7e, 0x00, 0x00, - 0x7a, 0x03, 0x01, 0x2b, 0x7a, 0x03, 0x01, 0x2c, 0x22, 0x7e, 0xb3, 0x01, 0x23, 0x54, 0x60, 0x60, - 0x05, 0xb4, 0x40, 0x15, 0x80, 0x13, 0x7e, 0xb3, 0x01, 0x24, 0xb4, 0x05, 0x0c, 0x75, 0x08, 0x71, - 0x12, 0x08, 0x33, 0x7e, 0xb3, 0x01, 0x26, 0xf5, 0x8f, 0x22, 0x75, 0xf6, 0x00, 0x22, 0xbe, 0x57, - 0x01, 0x29, 0x28, 0x04, 0x7e, 0x57, 0x01, 0x29, 0x7a, 0x0f, 0x01, 0x2e, 0x7a, 0x57, 0x01, 0x32, - 0x02, 0x02, 0xa9, 0x7e, 0xef, 0x01, 0x2e, 0x7e, 0xf7, 0x01, 0x32, 0x7e, 0x07, 0x01, 0x32, 0x4d, - 0x00, 0x68, 0x21, 0x7e, 0x00, 0x00, 0x7e, 0xeb, 0xb0, 0xf5, 0xf3, 0xa3, 0xa5, 0x08, 0x1b, 0xf4, - 0x68, 0x04, 0xa5, 0xb8, 0x08, 0xf0, 0x7a, 0xef, 0x01, 0x2e, 0x7a, 0xf7, 0x01, 0x32, 0x75, 0x08, - 0x06, 0x12, 0x08, 0x33, 0x7a, 0x01, 0xf6, 0x22, 0xc2, 0xc1, 0x75, 0x08, 0x03, 0x12, 0x08, 0x33, - 0xa9, 0x36, 0xe2, 0x16, 0xe5, 0xf5, 0x54, 0xc0, 0x68, 0x07, 0xa9, 0xd7, 0xf4, 0xa9, 0x27, 0xf4, - 0xfc, 0x53, 0xe1, 0x3f, 0x43, 0xf2, 0x88, 0x02, 0x03, 0x55, 0x7e, 0xb3, 0x01, 0x2c, 0xb4, 0x02, - 0x0f, 0xa9, 0xd4, 0xe4, 0x7e, 0xb0, 0x00, 0x7a, 0xb3, 0x01, 0x2c, 0x7a, 0xb3, 0x01, 0x2b, 0x22, - 0xb4, 0x01, 0x39, 0x7e, 0x21, 0xe6, 0x7c, 0x32, 0x7e, 0x13, 0x01, 0x2d, 0x2c, 0x21, 0x7a, 0x23, - 0x01, 0x2d, 0x7e, 0x00, 0x00, 0x2e, 0x04, 0x01, 0x34, 0xe5, 0xe3, 0x7a, 0x09, 0xb0, 0x0b, 0x04, - 0xa5, 0xdb, 0xf6, 0xa9, 0xd4, 0xe4, 0x75, 0x08, 0x70, 0x12, 0x08, 0x33, 0x7e, 0xb3, 0x01, 0x2d, - 0x7e, 0xa3, 0x01, 0x2a, 0xbc, 0xab, 0x78, 0x03, 0x12, 0x03, 0xec, 0x22, 0x02, 0x07, 0x55, 0xe5, - 0xe6, 0xb4, 0x08, 0x65, 0xa9, 0xc4, 0xe2, 0x7e, 0x01, 0xe3, 0x7e, 0x11, 0xe3, 0x7e, 0x31, 0xe3, - 0x7e, 0x21, 0xe3, 0x7e, 0x51, 0xe3, 0x7e, 0x41, 0xe3, 0x7e, 0x71, 0xe3, 0x7e, 0x61, 0xe3, 0x7a, - 0x0f, 0x01, 0x23, 0x7a, 0x1f, 0x01, 0x27, 0x75, 0x08, 0x04, 0x12, 0x08, 0x33, 0x7a, 0x01, 0x08, - 0x12, 0x08, 0x33, 0x7a, 0x11, 0x08, 0x12, 0x08, 0x33, 0x7a, 0x21, 0x08, 0x12, 0x08, 0x33, 0x7a, - 0x31, 0x08, 0x12, 0x08, 0x33, 0x7a, 0x41, 0x08, 0x12, 0x08, 0x33, 0x7a, 0x51, 0x08, 0x12, 0x08, - 0x33, 0x7a, 0x61, 0x08, 0x12, 0x08, 0x33, 0x7a, 0x71, 0x08, 0x12, 0x08, 0x33, 0xa9, 0xd4, 0xe4, - 0xa9, 0xd7, 0xf4, 0xa9, 0xc6, 0xe2, 0x12, 0x03, 0xc0, 0x22, 0x6d, 0x00, 0x7e, 0x14, 0x01, 0x02, - 0x7a, 0x07, 0x01, 0x32, 0x7a, 0x03, 0x01, 0x2d, 0x7e, 0xb3, 0x01, 0x23, 0x20, 0xe7, 0x0f, 0x7a, - 0x23, 0x01, 0x2c, 0x7a, 0x33, 0x01, 0x2b, 0xbe, 0x07, 0x01, 0x29, 0x68, 0x09, 0x22, 0x7a, 0x33, - 0x01, 0x2c, 0x7a, 0x23, 0x01, 0x2b, 0x7e, 0xb3, 0x01, 0x23, 0x54, 0xe3, 0x23, 0x23, 0x30, 0xe0, - 0x02, 0xd2, 0xe5, 0x30, 0xe7, 0x02, 0xd2, 0xe4, 0x30, 0xe5, 0x06, 0x30, 0xe4, 0x03, 0x02, 0x07, - 0x55, 0x54, 0x3e, 0xf5, 0xf0, 0x03, 0x54, 0x1f, 0xc3, 0x25, 0xf0, 0x90, 0x04, 0x18, 0x75, 0x84, - 0xff, 0x73, 0x02, 0x05, 0x6c, 0x02, 0x04, 0x60, 0x02, 0x06, 0x09, 0x02, 0x06, 0x24, 0x02, 0x05, - 0x05, 0x02, 0x04, 0xc6, 0x02, 0x06, 0x3d, 0x02, 0x06, 0x3d, 0x02, 0x06, 0x40, 0x02, 0x06, 0x40, - 0x02, 0x06, 0x40, 0x02, 0x06, 0x40, 0x02, 0x06, 0x40, 0x02, 0x06, 0x40, 0x02, 0x06, 0x40, 0x02, - 0x06, 0x40, 0x02, 0x06, 0x46, 0x02, 0x06, 0xfa, 0x02, 0x06, 0x43, 0x02, 0x06, 0x43, 0x02, 0x06, - 0x43, 0x02, 0x06, 0x43, 0x02, 0x06, 0x43, 0x02, 0x06, 0x43, 0x7e, 0xb3, 0x01, 0x24, 0xb4, 0x06, - 0x2a, 0x7e, 0xb3, 0x01, 0x25, 0x60, 0x56, 0x7c, 0x0b, 0x7e, 0x13, 0x01, 0x26, 0x7e, 0x17, 0x01, - 0x27, 0x75, 0x08, 0x72, 0x12, 0x08, 0x33, 0x7a, 0x01, 0x08, 0x12, 0x08, 0x33, 0x7a, 0x11, 0x08, - 0x12, 0x08, 0x33, 0x12, 0x07, 0x5f, 0x40, 0x35, 0x02, 0x02, 0x94, 0xb4, 0x08, 0x10, 0x75, 0x08, - 0x74, 0x12, 0x08, 0x33, 0x7e, 0xb3, 0x3f, 0xf1, 0xf5, 0xf3, 0x75, 0xf6, 0x01, 0x22, 0xb4, 0x00, - 0x1c, 0x75, 0x08, 0x75, 0x12, 0x08, 0x33, 0x7e, 0xb3, 0x3f, 0xf2, 0x30, 0xe0, 0x05, 0x75, 0xf3, - 0x02, 0x80, 0x03, 0x75, 0xf3, 0x00, 0x75, 0xf3, 0x00, 0x75, 0xf6, 0x02, 0x22, 0x02, 0x07, 0x55, - 0x7e, 0xb3, 0x01, 0x24, 0xb4, 0x00, 0x35, 0x75, 0x08, 0x76, 0x12, 0x08, 0x33, 0x7e, 0xb3, 0x01, - 0x28, 0x54, 0x0f, 0xf5, 0xf1, 0x7e, 0xb3, 0x01, 0x28, 0x20, 0xe7, 0x09, 0xe5, 0xe1, 0x30, 0xe7, - 0x0d, 0x74, 0x01, 0x80, 0x0b, 0xe5, 0xe1, 0x30, 0xe6, 0x04, 0x74, 0x01, 0x80, 0x02, 0x74, 0x00, - 0x53, 0xf1, 0x80, 0xf5, 0xf3, 0x75, 0xf3, 0x00, 0x75, 0xf6, 0x02, 0x22, 0x02, 0x07, 0x55, 0xc0, - 0xf1, 0x7e, 0xb3, 0x01, 0x28, 0x54, 0x0f, 0x42, 0xf1, 0x7e, 0xb3, 0x01, 0x26, 0xb4, 0x00, 0x45, - 0x7e, 0xb3, 0x01, 0x24, 0xb4, 0x01, 0x24, 0x75, 0x08, 0x77, 0x12, 0x08, 0x33, 0x7e, 0xb3, 0x01, - 0x28, 0x54, 0x0f, 0x78, 0x05, 0x53, 0xe1, 0x3f, 0x80, 0x37, 0x7e, 0xb3, 0x01, 0x28, 0x20, 0xe7, - 0x05, 0x53, 0xe1, 0x7f, 0x80, 0x2b, 0x53, 0xe1, 0xbf, 0x80, 0x26, 0xb4, 0x03, 0x17, 0x75, 0x08, - 0x78, 0x12, 0x08, 0x33, 0x7e, 0xb3, 0x01, 0x28, 0x20, 0xe7, 0x05, 0x43, 0xe1, 0x80, 0x80, 0x11, - 0x43, 0xe1, 0x40, 0x80, 0x0c, 0x43, 0xe1, 0xc0, 0xd0, 0xf1, 0x75, 0x08, 0x07, 0x12, 0x08, 0x33, - 0x22, 0xd0, 0xf1, 0x02, 0x02, 0x90, 0x7e, 0xb3, 0x01, 0x24, 0xb4, 0x09, 0x23, 0x75, 0x08, 0x79, - 0x12, 0x08, 0x33, 0x7e, 0xb3, 0x01, 0x26, 0xbe, 0xb3, 0x3f, 0xf1, 0x68, 0x11, 0xca, 0xb8, 0xc0, - 0xf1, 0x12, 0x01, 0x1d, 0xd0, 0xf1, 0xda, 0xb8, 0x50, 0x76, 0x7a, 0xb3, 0x3f, 0xf1, 0x80, 0x6d, - 0xb4, 0x05, 0x08, 0x75, 0x08, 0x7a, 0x12, 0x08, 0x33, 0x80, 0x62, 0xb4, 0x03, 0x19, 0x75, 0x08, - 0x7b, 0x12, 0x08, 0x33, 0x7e, 0xb3, 0x01, 0x26, 0xb4, 0x01, 0x55, 0x7e, 0xb3, 0x3f, 0xf2, 0x44, - 0x01, 0x7a, 0xb3, 0x3f, 0xf2, 0x80, 0x46, 0xb4, 0x01, 0x19, 0x75, 0x08, 0x7c, 0x12, 0x08, 0x33, - 0x7e, 0xb3, 0x01, 0x26, 0xb4, 0x01, 0x39, 0x7e, 0xb3, 0x3f, 0xf2, 0x54, 0xfe, 0x7a, 0xb3, 0x3f, - 0xf2, 0x80, 0x2a, 0xb4, 0x07, 0x2a, 0x7e, 0xb3, 0x01, 0x25, 0x60, 0x24, 0x7c, 0x0b, 0x7e, 0x13, - 0x01, 0x26, 0x7e, 0x17, 0x01, 0x27, 0x75, 0x08, 0x73, 0x12, 0x08, 0x33, 0x7a, 0x01, 0x08, 0x12, - 0x08, 0x33, 0x7a, 0x11, 0x08, 0x12, 0x08, 0x33, 0x12, 0x07, 0x8b, 0x40, 0x03, 0x02, 0x02, 0x90, - 0x02, 0x07, 0x55, 0x7e, 0xb3, 0x01, 0x24, 0xb4, 0x0b, 0xf6, 0x75, 0x08, 0x7d, 0x12, 0x08, 0x33, - 0x7e, 0xb3, 0x01, 0x26, 0x7e, 0xa3, 0x01, 0x28, 0x4c, 0xab, 0x78, 0xe4, 0x80, 0xdf, 0x7e, 0xb3, - 0x01, 0x24, 0xb4, 0x0a, 0xdb, 0x75, 0x08, 0x7e, 0x12, 0x08, 0x33, 0x7e, 0xb3, 0x01, 0x26, 0x70, - 0xcf, 0xf5, 0xf3, 0x75, 0xf6, 0x01, 0x22, 0x02, 0x07, 0x55, 0x02, 0x07, 0x55, 0x02, 0x07, 0x55, - 0x7e, 0xb3, 0x01, 0x24, 0xb4, 0x04, 0x20, 0x75, 0x08, 0xc3, 0x12, 0x08, 0x33, 0x7e, 0x04, 0x00, - 0x01, 0x7e, 0x17, 0x01, 0x25, 0x7e, 0x18, 0x01, 0x34, 0x7a, 0x1c, 0x00, 0x00, 0x7e, 0x47, 0x01, - 0x29, 0x12, 0x08, 0x3f, 0x02, 0x06, 0xf4, 0xb4, 0x06, 0x3a, 0x75, 0x08, 0xc1, 0x12, 0x08, 0x33, - 0x7e, 0x58, 0x00, 0x00, 0x7a, 0x5c, 0x00, 0xfe, 0x7d, 0xca, 0x7e, 0xd7, 0x01, 0x25, 0x7e, 0x78, - 0x01, 0x34, 0x7a, 0x7c, 0x00, 0x00, 0x7e, 0x77, 0x01, 0x29, 0x75, 0x08, 0xc1, 0x12, 0x08, 0x33, - 0xc0, 0xa8, 0xc0, 0x87, 0xc2, 0xaf, 0xa9, 0xd5, 0x87, 0x12, 0x08, 0xd6, 0xd0, 0x87, 0xd0, 0xa8, - 0x40, 0x4f, 0x80, 0x4a, 0xb4, 0x00, 0x1c, 0xc2, 0xaf, 0xa9, 0xd5, 0x87, 0x12, 0x02, 0x90, 0xe4, - 0x8d, 0xef, 0x8d, 0xef, 0x8d, 0xef, 0xd5, 0xe0, 0xf7, 0xc0, 0xd1, 0xca, 0x02, 0xff, 0xca, 0x06, - 0x00, 0x00, 0x32, 0xb4, 0x09, 0x12, 0x7e, 0x57, 0x01, 0x25, 0x4d, 0x55, 0x68, 0x05, 0xa9, 0xd2, - 0xb1, 0x80, 0x03, 0xa9, 0xc2, 0xb1, 0x80, 0x16, 0xb4, 0x07, 0x16, 0xc2, 0xaf, 0x7e, 0x07, 0x01, - 0x27, 0x7e, 0x17, 0x01, 0x25, 0xc0, 0xd1, 0xca, 0x18, 0xca, 0x38, 0xca, 0x28, 0x32, 0x02, 0x02, - 0x90, 0x02, 0x07, 0x55, 0x7e, 0xb3, 0x01, 0x24, 0xb4, 0x03, 0x15, 0x75, 0x08, 0xc2, 0x12, 0x08, - 0x33, 0x7e, 0x04, 0x00, 0x01, 0x7e, 0x17, 0x01, 0x25, 0x7e, 0x57, 0x01, 0x29, 0x02, 0x02, 0x94, - 0xb4, 0x05, 0x39, 0x75, 0x08, 0xc0, 0x12, 0x08, 0x33, 0xc0, 0xa8, 0xc0, 0x87, 0xc2, 0xaf, 0xa9, - 0xd5, 0x87, 0x7e, 0x08, 0x01, 0x34, 0x7a, 0x0c, 0x00, 0x00, 0x7e, 0x24, 0x00, 0xfe, 0x7e, 0x37, - 0x01, 0x25, 0x7e, 0x47, 0x01, 0x29, 0x12, 0x08, 0x3f, 0xd0, 0x87, 0xd0, 0xa8, 0x7e, 0x08, 0x01, - 0x34, 0x7a, 0x0c, 0x00, 0x00, 0x7e, 0x57, 0x01, 0x29, 0x02, 0x02, 0x94, 0x02, 0x07, 0x55, 0x75, - 0x08, 0x07, 0x12, 0x08, 0x33, 0x43, 0xe1, 0xc0, 0x22, 0xc0, 0xa8, 0xc0, 0x87, 0xc2, 0xaf, 0xa9, - 0xd5, 0x87, 0x12, 0x07, 0xca, 0x40, 0x19, 0x7e, 0x08, 0x01, 0x34, 0x7a, 0x0c, 0x00, 0x00, 0xca, - 0x0b, 0xca, 0x49, 0x12, 0x08, 0x3f, 0xda, 0x59, 0xda, 0x0b, 0xd0, 0x87, 0xd0, 0xa8, 0xc3, 0x22, - 0xd0, 0x87, 0xd0, 0xa8, 0x22, 0xc0, 0xa8, 0xc0, 0x87, 0xc2, 0xaf, 0xa9, 0xd5, 0x87, 0x12, 0x07, - 0xca, 0x40, 0x2b, 0x7e, 0x58, 0x00, 0x00, 0x7a, 0x5c, 0x00, 0xfe, 0x7f, 0x61, 0x7e, 0x78, 0x01, - 0x34, 0x7a, 0x7c, 0x00, 0x00, 0x7e, 0x77, 0x01, 0x29, 0xbd, 0x74, 0x78, 0x11, 0x75, 0x08, 0xc1, - 0x12, 0x08, 0x33, 0x12, 0x08, 0xd6, 0x40, 0x06, 0xd0, 0x87, 0xd0, 0xa8, 0xc3, 0x22, 0xd0, 0x87, - 0xd0, 0xa8, 0xd3, 0x22, 0x7e, 0x24, 0x00, 0xfe, 0x7e, 0x34, 0x7f, 0xca, 0x0b, 0x1a, 0x50, 0xc5, - 0xf0, 0x7d, 0x62, 0x7d, 0x75, 0x7d, 0x87, 0x7e, 0x34, 0x7f, 0x03, 0x7e, 0x1b, 0xb0, 0xbc, 0x0b, - 0x50, 0x49, 0x3e, 0x00, 0x3e, 0x00, 0x0a, 0x50, 0x2d, 0x75, 0x0b, 0x3a, 0x30, 0x69, 0x53, 0x00, - 0x02, 0xbd, 0x38, 0x50, 0x02, 0x2d, 0x38, 0xbc, 0x1b, 0x50, 0x30, 0x3e, 0x10, 0x3e, 0x10, 0x0a, - 0x51, 0x2d, 0x35, 0x69, 0x41, 0x00, 0x02, 0x0b, 0x1a, 0x30, 0xbd, 0x38, 0x50, 0x02, 0x2d, 0x38, - 0xbe, 0x44, 0xff, 0xff, 0x78, 0x05, 0x7e, 0x1b, 0x90, 0x0a, 0x49, 0x4d, 0x44, 0x68, 0x0c, 0xbe, - 0x44, 0x00, 0xff, 0x28, 0x04, 0x7e, 0x44, 0x00, 0xff, 0xc3, 0x22, 0xd3, 0x22, - -// Segment #16, EXCLUDED Start Address 00ff7c00, Length 199 - - -// Segment #17, EXCLUDED Start Address 00ff7f00, Length 192 - - -// Segment #17, Start Address 00ff7fc0, Length 64 -0xff,0x00,0xc0,0x7f,0x40,0x00, - 0x40, 0x01, 0x02, 0x00, 0xca, 0x1b, 0x01, 0x0c, 0x02, 0x00, 0x00, 0x7c, 0x00, 0x00, 0x01, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf1, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - -// Segment #18, Start Address 00ff0833, Length 5015 -0xff,0x00,0x33,0x08,0x97,0x13, - 0xca, 0x08, 0x7e, 0x01, 0x08, 0x7a, 0x03, 0x3f, 0xf0, 0xda, 0x08, 0x22, 0x80, 0x50, 0x0b, 0x1a, - 0x60, 0x0b, 0x35, 0x0b, 0x1a, 0x70, 0x0b, 0x35, 0x0b, 0x1a, 0x80, 0x0b, 0x35, 0x0b, 0x1a, 0x90, - 0x0b, 0x35, 0x0b, 0x1a, 0xa0, 0x0b, 0x35, 0x0b, 0x1a, 0xb0, 0x0b, 0x35, 0x0b, 0x1a, 0xc0, 0x0b, - 0x35, 0x0b, 0x1a, 0xd0, 0x0b, 0x35, 0x1b, 0x0a, 0x60, 0x0b, 0x15, 0x1b, 0x0a, 0x70, 0x0b, 0x15, - 0x1b, 0x0a, 0x80, 0x0b, 0x15, 0x1b, 0x0a, 0x90, 0x0b, 0x15, 0x1b, 0x0a, 0xa0, 0x0b, 0x15, 0x1b, - 0x0a, 0xb0, 0x0b, 0x15, 0x1b, 0x0a, 0xc0, 0x0b, 0x15, 0x1b, 0x0a, 0xd0, 0x0b, 0x15, 0x9e, 0x44, - 0x00, 0x10, 0x50, 0xaa, 0x2e, 0x44, 0x00, 0x10, 0x68, 0x0e, 0x7e, 0x1b, 0xc0, 0x7a, 0x0b, 0xc0, - 0x0b, 0x14, 0x0b, 0x34, 0x1b, 0x44, 0x78, 0xf2, 0x22, 0x7f, 0x6f, 0x7f, 0xf0, 0x1b, 0xfc, 0x7c, - 0x54, 0x7d, 0x32, 0x80, 0x08, 0xca, 0x1b, 0xca, 0x1b, 0xca, 0x1b, 0xca, 0x1b, 0x9e, 0x44, 0x00, - 0x10, 0x50, 0xf2, 0x2e, 0x44, 0x00, 0x10, 0x68, 0x06, 0xca, 0x48, 0x1b, 0x44, 0x78, 0xfa, 0x7f, - 0xf6, 0x89, 0xe4, 0xca, 0x6b, 0x5e, 0xd4, 0x00, 0x3f, 0x68, 0x20, 0x7e, 0x84, 0x00, 0x40, 0x9d, - 0x8d, 0xda, 0x6b, 0xbd, 0x87, 0x38, 0x16, 0xca, 0x79, 0x7d, 0x78, 0x12, 0x09, 0x00, 0xda, 0x79, - 0x40, 0x08, 0x9d, 0x78, 0x68, 0x02, 0x80, 0x05, 0xc2, 0xd7, 0x22, 0xda, 0x6b, 0x43, 0x90, 0x30, - 0x74, 0xaa, 0x39, 0xb5, 0x55, 0x55, 0x74, 0x55, 0x39, 0xb5, 0x2a, 0xaa, 0x74, 0xa0, 0x39, 0xb5, - 0x55, 0x55, 0x7e, 0x04, 0x00, 0x40, 0x9d, 0x70, 0x50, 0x06, 0x2d, 0x70, 0x7d, 0x07, 0x6d, 0x77, - 0x7c, 0x31, 0x7e, 0x7b, 0x00, 0x7a, 0x6b, 0x00, 0x0b, 0x7c, 0x0b, 0x6c, 0xa5, 0xd9, 0xf3, 0x7f, - 0x16, 0x1b, 0x1c, 0x7e, 0x54, 0x27, 0x10, 0x7e, 0x1b, 0x10, 0xbc, 0x10, 0x68, 0x06, 0x1b, 0x54, - 0x78, 0xf5, 0x80, 0x2c, 0x6d, 0x00, 0x7c, 0x20, 0x7f, 0x16, 0x9f, 0x10, 0x7f, 0x27, 0x9f, 0x20, - 0x7e, 0x2b, 0x00, 0x7e, 0x1b, 0x10, 0xbc, 0x01, 0x78, 0x16, 0x0b, 0x2c, 0x0b, 0x1c, 0xa5, 0xdb, - 0xef, 0x7c, 0xb6, 0x20, 0xe0, 0x03, 0x63, 0x90, 0x30, 0x4d, 0x77, 0x78, 0x93, 0xc2, 0xd7, 0x22, - 0xd2, 0xd7, 0x22, 0x00, 0x04, 0x00, 0x04, 0x00, 0x00, 0x06, 0x04, 0x02, 0x04, 0x00, 0x02, 0x01, - 0x04, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x02, 0x02, - 0x04, 0x00, 0x08, 0x10, 0x02, 0x10, 0x04, 0x02, 0x08, 0x00, 0x01, 0x01, 0x08, 0x7e, 0x18, 0x7f, - 0xbd, 0x7a, 0x1c, 0x00, 0xff, 0x0b, 0x1a, 0x00, 0xbe, 0x10, 0x14, 0x38, 0x1a, 0x0a, 0x51, 0x23, - 0x7e, 0x18, 0x09, 0x76, 0x7a, 0x1c, 0x00, 0xff, 0x2d, 0x35, 0x0b, 0x1a, 0x50, 0x60, 0x08, 0xa5, - 0xb8, 0x02, 0x03, 0x4e, 0xa0, 0x08, 0x22, 0x80, 0xfe, 0x7e, 0xe8, 0x7f, 0xbf, 0x7a, 0xec, 0x00, - 0xff, 0xe0, 0xf5, 0x22, 0x54, 0xc0, 0x68, 0x16, 0x7e, 0xe8, 0x7f, 0xbe, 0x7a, 0xec, 0x00, 0xff, - 0xe0, 0x60, 0x0c, 0x12, 0x09, 0xa0, 0xf5, 0x09, 0x7a, 0xa1, 0x20, 0x02, 0x0f, 0x0a, 0x22, 0xc2, - 0x95, 0xd2, 0x94, 0x12, 0x19, 0xfb, 0x53, 0x90, 0xcf, 0x12, 0x19, 0xfb, 0x80, 0xf1, 0x0d, 0x0a, - 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0d, - 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, - 0x45, 0x64, 0x67, 0x65, 0x70, 0x6f, 0x72, 0x74, 0x2f, 0x34, 0x20, 0x2d, 0x20, 0x48, 0x61, 0x72, - 0x64, 0x77, 0x61, 0x72, 0x65, 0x20, 0x44, 0x69, 0x61, 0x67, 0x6e, 0x6f, 0x73, 0x74, 0x69, 0x63, - 0x73, 0x2c, 0x20, 0x52, 0x65, 0x76, 0x20, 0x31, 0x2e, 0x30, 0x30, 0x3b, 0x20, 0x43, 0x6f, 0x70, - 0x79, 0x72, 0x69, 0x67, 0x68, 0x74, 0x20, 0x31, 0x39, 0x39, 0x38, 0x20, 0x49, 0x6e, 0x73, 0x69, - 0x64, 0x65, 0x20, 0x4f, 0x75, 0x74, 0x20, 0x4e, 0x65, 0x74, 0x77, 0x6f, 0x72, 0x6b, 0x73, 0x0d, - 0x0a, 0x00, 0x50, 0x61, 0x73, 0x73, 0x00, 0x46, 0x41, 0x49, 0x4c, 0x20, 0x21, 0x21, 0x00, 0x50, - 0x61, 0x73, 0x73, 0x20, 0x20, 0x20, 0x20, 0x00, 0x46, 0x41, 0x49, 0x4c, 0x20, 0x21, 0x21, 0x20, - 0x00, 0x0d, 0x0a, 0x44, 0x65, 0x74, 0x65, 0x63, 0x74, 0x20, 0x52, 0x61, 0x6d, 0x3a, 0x20, 0x20, - 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, - 0x20, 0x20, 0x00, 0x0d, 0x0a, 0x52, 0x61, 0x6d, 0x20, 0x54, 0x65, 0x73, 0x74, 0x3a, 0x20, 0x20, - 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, - 0x20, 0x20, 0x20, 0x20, 0x00, 0x0d, 0x0a, 0x41, 0x64, 0x64, 0x72, 0x65, 0x73, 0x73, 0x20, 0x62, - 0x69, 0x74, 0x20, 0x30, 0x2d, 0x31, 0x34, 0x20, 0x74, 0x65, 0x73, 0x74, 0x3a, 0x20, 0x20, 0x20, - 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x0d, 0x0a, 0x57, 0x72, 0x6f, 0x74, 0x65, 0x20, 0x41, - 0x64, 0x64, 0x72, 0x65, 0x73, 0x73, 0x3a, 0x20, 0x30, 0x30, 0x3a, 0x00, 0x20, 0x20, 0x77, 0x69, - 0x74, 0x68, 0x20, 0x64, 0x61, 0x74, 0x61, 0x3a, 0x20, 0x00, 0x2c, 0x20, 0x61, 0x6e, 0x64, 0x20, - 0x72, 0x65, 0x61, 0x64, 0x3a, 0x20, 0x00, 0x0d, 0x0a, 0x4f, 0x6e, 0x65, 0x20, 0x6f, 0x72, 0x20, - 0x62, 0x6f, 0x74, 0x68, 0x20, 0x6f, 0x66, 0x20, 0x74, 0x68, 0x65, 0x20, 0x66, 0x6f, 0x6c, 0x6c, - 0x6f, 0x77, 0x69, 0x6e, 0x67, 0x20, 0x41, 0x64, 0x64, 0x72, 0x65, 0x73, 0x73, 0x20, 0x62, 0x69, - 0x74, 0x73, 0x20, 0x6c, 0x69, 0x73, 0x74, 0x65, 0x64, 0x20, 0x61, 0x72, 0x65, 0x20, 0x73, 0x68, - 0x6f, 0x72, 0x74, 0x65, 0x64, 0x0d, 0x0a, 0x74, 0x6f, 0x20, 0x73, 0x6f, 0x6d, 0x65, 0x74, 0x68, - 0x69, 0x6e, 0x67, 0x3a, 0x20, 0x00, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x00, 0x0d, 0x0a, 0x44, 0x65, - 0x74, 0x65, 0x63, 0x74, 0x20, 0x55, 0x61, 0x72, 0x74, 0x3a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, - 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x0d, 0x0a, - 0x53, 0x63, 0x72, 0x61, 0x74, 0x63, 0x68, 0x20, 0x50, 0x61, 0x64, 0x2c, 0x46, 0x69, 0x46, 0x6f, - 0x20, 0x45, 0x6e, 0x61, 0x62, 0x6c, 0x65, 0x20, 0x26, 0x20, 0x52, 0x53, 0x54, 0x3a, 0x20, 0x00, - 0x0d, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x55, 0x61, 0x72, 0x74, 0x20, 0x54, 0x65, 0x73, 0x74, 0x73, - 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, - 0x20, 0x20, 0x20, 0x20, 0x50, 0x6f, 0x72, 0x74, 0x31, 0x20, 0x20, 0x20, 0x50, 0x6f, 0x72, 0x74, - 0x32, 0x20, 0x20, 0x20, 0x50, 0x6f, 0x72, 0x74, 0x33, 0x20, 0x20, 0x20, 0x50, 0x6f, 0x72, 0x74, - 0x34, 0x0d, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, - 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, - 0x20, 0x20, 0x20, 0x20, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, - 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, 0x2d, - 0x2d, 0x00, 0x0d, 0x0a, 0x50, 0x6f, 0x72, 0x74, 0x20, 0x44, 0x65, 0x63, 0x6f, 0x64, 0x65, 0x72, - 0x3a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, - 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x0d, 0x0a, 0x44, 0x69, 0x67, 0x69, 0x74, 0x61, 0x6c, 0x20, - 0x4c, 0x6f, 0x6f, 0x70, 0x62, 0x61, 0x63, 0x6b, 0x3a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, - 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x0d, 0x0a, 0x41, 0x6e, 0x61, 0x6c, - 0x6f, 0x67, 0x20, 0x4c, 0x6f, 0x6f, 0x70, 0x62, 0x61, 0x63, 0x6b, 0x3a, 0x20, 0x20, 0x20, 0x20, - 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x0d, 0x0a, - 0x52, 0x58, 0x44, 0x2c, 0x54, 0x58, 0x44, 0x20, 0x74, 0x6f, 0x20, 0x52, 0x54, 0x53, 0x2c, 0x43, - 0x54, 0x53, 0x2c, 0x52, 0x49, 0x20, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x3a, 0x20, 0x20, 0x20, 0x20, - 0x20, 0x00, 0x0d, 0x0a, 0x52, 0x58, 0x44, 0x2c, 0x54, 0x58, 0x44, 0x20, 0x74, 0x6f, 0x20, 0x44, - 0x54, 0x52, 0x2c, 0x44, 0x53, 0x52, 0x2c, 0x43, 0x44, 0x20, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x3a, - 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x0d, 0x0a, 0x52, 0x54, 0x53, 0x5b, 0x43, 0x54, 0x53, 0x2c, - 0x52, 0x49, 0x5d, 0x20, 0x74, 0x6f, 0x20, 0x44, 0x54, 0x52, 0x2c, 0x44, 0x53, 0x52, 0x2c, 0x43, - 0x44, 0x20, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x3a, 0x20, 0x00, 0x0d, 0x0a, 0x52, 0x54, 0x53, 0x5b, - 0x43, 0x54, 0x53, 0x2c, 0x43, 0x44, 0x5d, 0x20, 0x74, 0x6f, 0x20, 0x44, 0x53, 0x52, 0x2c, 0x52, - 0x49, 0x20, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x3a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x0d, 0x0a, - 0x44, 0x54, 0x52, 0x5b, 0x44, 0x53, 0x52, 0x2c, 0x43, 0x44, 0x5d, 0x20, 0x74, 0x6f, 0x20, 0x52, - 0x54, 0x53, 0x2c, 0x43, 0x54, 0x53, 0x2c, 0x52, 0x49, 0x20, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x3a, - 0x20, 0x00, 0x0d, 0x0a, 0x44, 0x54, 0x52, 0x20, 0x74, 0x6f, 0x20, 0x43, 0x54, 0x53, 0x2c, 0x43, - 0x44, 0x20, 0x53, 0x68, 0x6f, 0x72, 0x74, 0x3a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, - 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x0d, 0x0a, 0x52, 0x54, 0x53, 0x20, 0x74, 0x6f, 0x20, 0x43, - 0x54, 0x53, 0x2c, 0x52, 0x49, 0x20, 0x4c, 0x6f, 0x6f, 0x70, 0x62, 0x61, 0x63, 0x6b, 0x3a, 0x20, - 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x0d, 0x0a, 0x52, 0x54, 0x53, 0x20, - 0x74, 0x6f, 0x20, 0x43, 0x54, 0x53, 0x2c, 0x43, 0x44, 0x20, 0x4c, 0x6f, 0x6f, 0x70, 0x62, 0x61, - 0x63, 0x6b, 0x3a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, 0x0d, 0x0a, - 0x44, 0x54, 0x52, 0x20, 0x74, 0x6f, 0x20, 0x44, 0x53, 0x52, 0x2c, 0x43, 0x44, 0x20, 0x4c, 0x6f, - 0x6f, 0x70, 0x62, 0x61, 0x63, 0x6b, 0x3a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, - 0x20, 0x00, 0x0d, 0x0a, 0x0a, 0x20, 0x20, 0x20, 0x45, 0x20, 0x52, 0x20, 0x52, 0x20, 0x4f, 0x20, - 0x52, 0x20, 0x21, 0x21, 0x21, 0x2c, 0x20, 0x45, 0x20, 0x52, 0x20, 0x52, 0x20, 0x4f, 0x20, 0x52, - 0x20, 0x21, 0x21, 0x21, 0x20, 0x2c, 0x20, 0x45, 0x20, 0x52, 0x20, 0x52, 0x20, 0x4f, 0x20, 0x52, - 0x20, 0x21, 0x21, 0x21, 0x0d, 0x0a, 0x0a, 0x44, 0x69, 0x61, 0x67, 0x6e, 0x6f, 0x73, 0x74, 0x69, - 0x63, 0x73, 0x20, 0x6e, 0x6f, 0x77, 0x20, 0x77, 0x69, 0x6c, 0x6c, 0x20, 0x65, 0x6e, 0x74, 0x65, - 0x72, 0x20, 0x61, 0x20, 0x64, 0x65, 0x62, 0x75, 0x67, 0x20, 0x6c, 0x6f, 0x6f, 0x70, 0x20, 0x6f, - 0x66, 0x20, 0x74, 0x68, 0x65, 0x20, 0x66, 0x69, 0x72, 0x73, 0x74, 0x20, 0x64, 0x65, 0x74, 0x65, - 0x63, 0x74, 0x65, 0x64, 0x20, 0x65, 0x72, 0x72, 0x6f, 0x72, 0x2e, 0x00, 0x0d, 0x0a, 0x0a, 0x4e, - 0x6f, 0x20, 0x48, 0x61, 0x72, 0x64, 0x77, 0x61, 0x72, 0x65, 0x20, 0x65, 0x72, 0x72, 0x6f, 0x72, - 0x73, 0x20, 0x64, 0x65, 0x74, 0x65, 0x63, 0x74, 0x65, 0x64, 0x2e, 0x0d, 0x0a, 0x00, 0x43, 0x6f, - 0x70, 0x79, 0x69, 0x6e, 0x67, 0x20, 0x63, 0x6f, 0x64, 0x65, 0x20, 0x66, 0x72, 0x6f, 0x6d, 0x20, - 0x4d, 0x61, 0x73, 0x74, 0x65, 0x72, 0x20, 0x74, 0x6f, 0x20, 0x53, 0x6c, 0x61, 0x76, 0x65, 0x27, - 0x73, 0x20, 0x45, 0x45, 0x70, 0x72, 0x6f, 0x6d, 0x20, 0x2e, 0x2e, 0x2e, 0x00, 0x44, 0x6f, 0x6e, - 0x65, 0x0d, 0x0a, 0x0a, 0x2d, 0x3e, 0x20, 0x54, 0x75, 0x72, 0x6e, 0x20, 0x75, 0x6e, 0x69, 0x74, - 0x20, 0x6f, 0x66, 0x66, 0x2c, 0x20, 0x64, 0x69, 0x73, 0x63, 0x6f, 0x6e, 0x6e, 0x65, 0x63, 0x74, - 0x20, 0x63, 0x61, 0x62, 0x6c, 0x65, 0x20, 0x61, 0x6e, 0x64, 0x20, 0x72, 0x75, 0x6e, 0x20, 0x73, - 0x74, 0x61, 0x6e, 0x64, 0x61, 0x6c, 0x6f, 0x6e, 0x65, 0x20, 0x64, 0x69, 0x61, 0x67, 0x6e, 0x6f, - 0x73, 0x74, 0x69, 0x63, 0x73, 0x2e, 0x00, 0xc2, 0xaf, 0xc2, 0x09, 0xc2, 0x0a, 0x75, 0x90, 0x0d, - 0x20, 0x17, 0x02, 0xd2, 0xb5, 0x43, 0x90, 0x30, 0x6c, 0x00, 0x7e, 0x10, 0x03, 0x12, 0x0f, 0x38, - 0x7e, 0x68, 0x0a, 0x01, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x0b, 0x00, 0x30, 0xb4, 0x02, - 0x80, 0x24, 0x02, 0x1b, 0x3c, 0x20, 0x09, 0x1d, 0xc2, 0x94, 0xd2, 0x95, 0x12, 0x19, 0xfb, 0x53, - 0x90, 0xcf, 0x12, 0x19, 0xfb, 0xc2, 0x95, 0xd2, 0x94, 0x12, 0x19, 0xfb, 0xa5, 0xd9, 0xe6, 0x43, - 0x90, 0x30, 0x12, 0x19, 0xfb, 0x22, 0x7e, 0x68, 0x0a, 0x94, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, - 0x93, 0x7e, 0xe4, 0x10, 0x00, 0x7e, 0x40, 0x55, 0x7a, 0xe9, 0x40, 0x0b, 0xe4, 0x7e, 0x50, 0xaa, - 0x7a, 0xe9, 0x50, 0x1b, 0xe4, 0xbe, 0xe9, 0x40, 0x68, 0x19, 0x7e, 0x68, 0x0a, 0x7a, 0x7a, 0x6c, - 0x00, 0xff, 0x12, 0x1a, 0x93, 0x12, 0x1a, 0x08, 0x30, 0x09, 0x13, 0x7a, 0xe9, 0x40, 0x7e, 0xe9, - 0x10, 0x80, 0xf8, 0x7e, 0x68, 0x0a, 0x75, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x0b, 0x00, - 0x7e, 0x68, 0x0a, 0xd8, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x7e, 0x78, 0x00, 0x00, 0x7e, - 0x70, 0x0e, 0x7e, 0xa4, 0xff, 0xff, 0x7e, 0xb4, 0xbf, 0xff, 0x7d, 0xcb, 0x0e, 0xc4, 0x7d, 0xdc, - 0x5d, 0xdb, 0x6c, 0xbb, 0x7d, 0xfa, 0x5e, 0xf4, 0x7f, 0xff, 0x7a, 0x7b, 0xb0, 0x0b, 0xb0, 0x7d, - 0xfb, 0x5e, 0xf4, 0x7f, 0xff, 0x7a, 0x7b, 0xb0, 0x0b, 0xb0, 0x7d, 0xfc, 0x5e, 0xf4, 0x7f, 0xff, - 0x7a, 0x7b, 0xb0, 0x0b, 0xb0, 0x7d, 0xfd, 0x5e, 0xf4, 0x7f, 0xff, 0x7a, 0x7b, 0xb0, 0x6c, 0xbb, - 0x7d, 0xfa, 0x5e, 0xf4, 0x7f, 0xff, 0xbe, 0x7b, 0xb0, 0x78, 0x41, 0x0b, 0xb0, 0x7d, 0xfb, 0x5e, - 0xf4, 0x7f, 0xff, 0xbe, 0x7b, 0xb0, 0x78, 0x34, 0x0b, 0xb0, 0x7d, 0xfc, 0x5e, 0xf4, 0x7f, 0xff, - 0xbe, 0x7b, 0xb0, 0x78, 0x27, 0x0b, 0xb0, 0x7d, 0xfd, 0x5e, 0xf4, 0x7f, 0xff, 0xbe, 0x7b, 0xb0, - 0x78, 0x1a, 0x0b, 0xb0, 0xbe, 0xc4, 0xff, 0xfe, 0x78, 0x92, 0x0e, 0xb4, 0xa5, 0xdf, 0x8b, 0x7e, - 0x68, 0x0a, 0x82, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x80, 0x77, 0xca, 0x5b, 0xca, 0x6b, - 0x7e, 0x68, 0x0a, 0x8b, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x7e, 0x68, 0x0b, 0x2a, 0x7a, - 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x0a, 0x47, 0x12, 0x1a, 0xc9, 0x7e, 0x68, 0x0b, 0x79, 0x7a, - 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x6c, 0x77, 0xda, 0x6b, 0xca, 0x6b, 0x0b, 0x70, 0x0e, 0xc4, - 0xbe, 0xc4, 0xff, 0xff, 0x78, 0xf6, 0x1b, 0x70, 0x0a, 0x47, 0x12, 0x1a, 0xc9, 0x12, 0x1a, 0x08, - 0x30, 0x09, 0x30, 0xda, 0x6b, 0xda, 0x5b, 0x6c, 0xbb, 0x7e, 0x78, 0x00, 0x00, 0x7d, 0xfa, 0x5e, - 0xf4, 0x7f, 0xff, 0x7a, 0x7b, 0xb0, 0x7d, 0xfb, 0x5e, 0xf4, 0x7f, 0xff, 0x7a, 0x7b, 0xb0, 0x7d, - 0xfc, 0x5e, 0xf4, 0x7f, 0xff, 0x7a, 0x7b, 0xb0, 0x7d, 0xfd, 0x5e, 0xf4, 0x7f, 0xff, 0x7a, 0x7b, - 0xb0, 0x80, 0xd4, 0x7e, 0x68, 0x0a, 0xb6, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x30, 0x17, - 0x0e, 0x7e, 0x78, 0x04, 0x20, 0x7a, 0x7c, 0x00, 0x00, 0x7e, 0x44, 0x7b, 0xe0, 0x80, 0x0c, 0x7e, - 0x78, 0x00, 0x00, 0x7a, 0x7c, 0x00, 0x01, 0x7e, 0x44, 0x80, 0x00, 0x0b, 0x00, 0x7e, 0x40, 0x3a, - 0x7c, 0x54, 0x7f, 0x57, 0x7d, 0x84, 0x6c, 0x66, 0x7a, 0x5b, 0x50, 0x0b, 0x5c, 0x0b, 0x50, 0xa5, - 0xde, 0x02, 0x0b, 0x50, 0x1b, 0x84, 0x78, 0xf0, 0x7c, 0x54, 0x7f, 0x57, 0x7d, 0x84, 0x6c, 0x66, - 0xbe, 0x5b, 0x50, 0x78, 0x1a, 0x0b, 0x5c, 0x0b, 0x50, 0xa5, 0xde, 0x02, 0x0b, 0x50, 0x1b, 0x84, - 0x78, 0xee, 0x7e, 0x68, 0x0a, 0x75, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x80, 0x4b, 0x7f, - 0x45, 0x7e, 0x68, 0x0a, 0x7a, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x7e, 0x68, 0x0a, 0xfa, - 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x7d, 0x4b, 0x12, 0x1a, 0xc9, 0x7e, 0x68, 0x0b, 0x0f, - 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x6c, 0x88, 0x7c, 0x95, 0x12, 0x1a, 0xc9, 0x7e, 0x68, - 0x0b, 0x1d, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x7e, 0x4b, 0x90, 0x12, 0x1a, 0xc9, 0x12, - 0x1a, 0x08, 0x30, 0x09, 0x05, 0x7e, 0x4b, 0x90, 0x80, 0xfb, 0x7e, 0x68, 0x0b, 0x7f, 0x7a, 0x6c, - 0x00, 0xff, 0x12, 0x1a, 0x93, 0x0b, 0x00, 0xd2, 0x92, 0x7e, 0x24, 0x80, 0x00, 0x09, 0xb2, 0x00, - 0x08, 0xbe, 0xb0, 0x01, 0x78, 0x0b, 0x09, 0xb2, 0x00, 0x14, 0xbe, 0xb0, 0x60, 0x78, 0x02, 0x80, - 0x17, 0x7e, 0x68, 0x0a, 0x7a, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x12, 0x1a, 0x08, 0x30, - 0x09, 0x11, 0x09, 0xb2, 0x00, 0x08, 0x80, 0xfa, 0x7e, 0x68, 0x0a, 0x75, 0x7a, 0x6c, 0x00, 0xff, - 0x12, 0x1a, 0x93, 0x7e, 0x68, 0x0b, 0xa1, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x0b, 0x00, - 0xc2, 0x92, 0x12, 0x19, 0xee, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0xa0, 0x55, 0x19, 0xa2, 0x00, 0x1c, - 0x7e, 0xb0, 0x01, 0x19, 0xb2, 0x00, 0x08, 0x09, 0xb2, 0x00, 0x1c, 0xbc, 0xab, 0x78, 0x37, 0x09, - 0xb2, 0x00, 0x08, 0x5e, 0xb0, 0xc0, 0xbe, 0xb0, 0xc0, 0x78, 0x2b, 0x7e, 0xa0, 0xaa, 0x19, 0xa2, - 0x00, 0x1c, 0x6c, 0xbb, 0x19, 0xb2, 0x00, 0x08, 0x09, 0xb2, 0x00, 0x1c, 0xbc, 0xab, 0x78, 0x16, - 0x09, 0xb2, 0x00, 0x08, 0x5e, 0xb0, 0xc0, 0x78, 0x0d, 0x7e, 0x68, 0x0a, 0x75, 0x7a, 0x6c, 0x00, - 0xff, 0x12, 0x1a, 0x93, 0x80, 0x1b, 0x7e, 0x68, 0x0a, 0x7a, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, - 0x93, 0x12, 0x1a, 0x08, 0x30, 0x09, 0x0a, 0x19, 0xa2, 0x00, 0x1c, 0x09, 0xb2, 0x00, 0x1c, 0x80, - 0xf6, 0x7e, 0x68, 0x0b, 0xc3, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x7e, 0x68, 0x0c, 0x45, - 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x09, 0x7e, 0xb0, - 0x01, 0x19, 0xb2, 0x00, 0x1c, 0x2e, 0x24, 0x01, 0x00, 0x0b, 0xb0, 0xa5, 0xd9, 0xf3, 0x7e, 0x24, - 0x80, 0x00, 0x7e, 0x11, 0x09, 0x7e, 0xb0, 0x01, 0x0b, 0x00, 0x09, 0xa2, 0x00, 0x1c, 0xbc, 0xab, - 0x78, 0x16, 0x7e, 0x68, 0x0a, 0x82, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x2e, 0x24, 0x01, - 0x00, 0x0b, 0xb0, 0xa5, 0xd9, 0xe2, 0x80, 0x25, 0x7e, 0x68, 0x0a, 0x8b, 0x7a, 0x6c, 0x00, 0xff, - 0x12, 0x1a, 0x93, 0x12, 0x1a, 0x08, 0x30, 0x09, 0xe4, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x09, - 0x09, 0xa2, 0x00, 0x1c, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xf5, 0x80, 0xec, 0x7e, 0x68, 0x0c, - 0x69, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x12, 0x13, 0x8a, 0x7e, 0x24, 0x80, 0x00, 0x7e, - 0x11, 0x09, 0x0b, 0x00, 0x74, 0x10, 0x19, 0xb2, 0x00, 0x10, 0x12, 0x13, 0x03, 0x2e, 0x24, 0x01, - 0x00, 0xa5, 0xd9, 0xee, 0x7e, 0x68, 0x0c, 0x8d, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x7e, - 0x24, 0x80, 0x00, 0x7e, 0x11, 0x09, 0x0b, 0x00, 0xe4, 0x19, 0xb2, 0x00, 0x10, 0x12, 0x13, 0x03, - 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xef, 0x30, 0x00, 0x03, 0x02, 0x18, 0xb7, 0x02, 0x13, 0xbb, - 0x74, 0x07, 0x19, 0xb2, 0x00, 0x08, 0x12, 0x19, 0xfb, 0x09, 0xb2, 0x00, 0x00, 0x09, 0xb2, 0x00, - 0x14, 0x09, 0xb2, 0x00, 0x00, 0x09, 0xb2, 0x00, 0x14, 0x09, 0xb2, 0x00, 0x00, 0x09, 0xb2, 0x00, - 0x14, 0x09, 0xb2, 0x00, 0x00, 0x09, 0xb2, 0x00, 0x14, 0xc2, 0x0b, 0x7e, 0xb0, 0x55, 0x12, 0x13, - 0x64, 0x7e, 0xb0, 0xaa, 0x12, 0x13, 0x64, 0x7e, 0xb0, 0x00, 0x12, 0x13, 0x64, 0x7e, 0xb0, 0xff, - 0x12, 0x13, 0x64, 0x30, 0x0b, 0x0f, 0x7e, 0x68, 0x0a, 0x8b, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, - 0x93, 0x12, 0x1a, 0x08, 0x22, 0x7e, 0x68, 0x0a, 0x82, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, - 0x22, 0x19, 0xb2, 0x00, 0x00, 0x12, 0x19, 0xee, 0x09, 0xa2, 0x00, 0x00, 0xbc, 0xab, 0x78, 0x01, - 0x22, 0x20, 0x09, 0x03, 0xd2, 0x0b, 0x22, 0x12, 0x1a, 0x08, 0x19, 0xb2, 0x00, 0x00, 0x12, 0x19, - 0xee, 0x09, 0xa2, 0x00, 0x00, 0x80, 0xf3, 0xd2, 0x92, 0x12, 0x19, 0xee, 0xc2, 0x92, 0x12, 0x19, - 0xee, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x09, 0x74, 0x80, 0x19, 0xb2, 0x00, 0x0c, 0x7e, 0x54, - 0x00, 0x02, 0x19, 0xa2, 0x00, 0x04, 0x19, 0xb2, 0x00, 0x00, 0x74, 0x03, 0x19, 0xb2, 0x00, 0x0c, - 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xe1, 0x22, 0x7e, 0x68, 0x0c, 0xb1, 0x7a, 0x6c, 0x00, 0xff, - 0x12, 0x1a, 0x93, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x09, 0x0b, 0x00, 0x12, 0x19, 0xee, 0x09, - 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x55, 0x19, 0xa2, 0x00, 0x00, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, - 0x18, 0x5e, 0xb0, 0x05, 0x78, 0x0d, 0x7e, 0x68, 0x0a, 0x82, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, - 0x93, 0x80, 0x1a, 0x7e, 0x68, 0x0a, 0x8b, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x12, 0x1a, - 0x08, 0x30, 0x09, 0x09, 0x19, 0xa2, 0x00, 0x00, 0x12, 0x19, 0xee, 0x80, 0xf7, 0x2e, 0x24, 0x01, - 0x00, 0xa5, 0xd9, 0xb6, 0x7e, 0x68, 0x0c, 0xd5, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x7e, - 0x24, 0x80, 0x00, 0x7e, 0x11, 0x09, 0x0b, 0x00, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x7e, - 0xa0, 0x55, 0x19, 0xa2, 0x00, 0x00, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x0a, - 0x78, 0x0d, 0x7e, 0x68, 0x0a, 0x82, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x80, 0x1a, 0x7e, - 0x68, 0x0a, 0x8b, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x12, 0x1a, 0x08, 0x30, 0x09, 0x09, - 0x19, 0xa2, 0x00, 0x00, 0x12, 0x19, 0xee, 0x80, 0xf7, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xb6, - 0x30, 0x04, 0x03, 0x02, 0x16, 0x8c, 0x7e, 0x68, 0x0c, 0xf9, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, - 0x93, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x09, 0x0b, 0x00, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, - 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, - 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x0a, 0x78, 0x3c, - 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, - 0x03, 0x19, 0xa2, 0x00, 0x10, 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, - 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x0a, 0x78, 0x14, 0x7e, 0x68, 0x0a, 0x82, 0x7a, 0x6c, 0x00, 0xff, - 0x12, 0x1a, 0x93, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0x9e, 0x80, 0x20, 0x7e, 0x68, 0x0a, 0x8b, - 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x12, 0x1a, 0x08, 0x30, 0x09, 0xe6, 0x7e, 0xa0, 0x02, - 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x80, 0xf1, 0x7e, 0x68, 0x0d, 0x41, - 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x09, 0x0b, 0x00, - 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x01, - 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, - 0x18, 0x5e, 0xb0, 0x05, 0x78, 0x3c, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, - 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x03, 0x19, 0xa2, 0x00, 0x10, 0x7e, 0xa0, 0x02, 0x19, 0xa2, - 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x05, 0x78, 0x14, 0x7e, 0x68, - 0x0a, 0x82, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0x9e, - 0x80, 0x20, 0x7e, 0x68, 0x0a, 0x8b, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x12, 0x1a, 0x08, - 0x30, 0x09, 0xe6, 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, - 0x80, 0xf1, 0x7e, 0x68, 0x0d, 0x89, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x7e, 0x24, 0x80, - 0x00, 0x7e, 0x11, 0x09, 0x0b, 0x00, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, - 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x50, 0xbe, 0xb0, 0x50, 0x78, 0x1f, 0x6c, 0xaa, 0x19, 0xa2, - 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x50, 0x78, 0x0d, 0x7e, 0x68, - 0x0a, 0x82, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x80, 0x20, 0x7e, 0x68, 0x0a, 0x8b, 0x7a, - 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x12, 0x1a, 0x08, 0x30, 0x09, 0x0f, 0x7e, 0xa0, 0x02, 0x19, - 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x80, 0xf1, 0x2e, 0x24, 0x01, 0x00, 0xa5, - 0xd9, 0xa2, 0x7e, 0x68, 0x0d, 0xd1, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x7e, 0x24, 0x80, - 0x00, 0x7e, 0x11, 0x09, 0x0b, 0x00, 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, - 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0xa0, 0xbe, 0xb0, 0xa0, 0x78, 0x1f, - 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0xa0, - 0x78, 0x0d, 0x7e, 0x68, 0x0a, 0x82, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x80, 0x20, 0x7e, - 0x68, 0x0a, 0x8b, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x12, 0x1a, 0x08, 0x30, 0x09, 0x0f, - 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x80, 0xf1, 0x2e, - 0x24, 0x01, 0x00, 0xa5, 0xd9, 0x9e, 0x02, 0x18, 0x2b, 0x7e, 0x68, 0x0d, 0x1d, 0x7a, 0x6c, 0x00, - 0xff, 0x12, 0x1a, 0x93, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x09, 0x0b, 0x00, 0x6c, 0xaa, 0x19, - 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, - 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, - 0x06, 0x78, 0x3c, 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, - 0x18, 0x7e, 0xa0, 0x03, 0x19, 0xa2, 0x00, 0x10, 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x12, - 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x06, 0x78, 0x14, 0x7e, 0x68, 0x0a, 0x82, 0x7a, - 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0x9e, 0x80, 0x20, 0x7e, - 0x68, 0x0a, 0x8b, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x12, 0x1a, 0x08, 0x30, 0x09, 0xe6, - 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x80, 0xf1, 0x7e, - 0x68, 0x0d, 0x65, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, - 0x09, 0x0b, 0x00, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, - 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, - 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x09, 0x78, 0x3c, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, - 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x03, 0x19, 0xa2, 0x00, 0x10, 0x7e, 0xa0, - 0x02, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x09, 0x78, - 0x14, 0x7e, 0x68, 0x0a, 0x82, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x2e, 0x24, 0x01, 0x00, - 0xa5, 0xd9, 0x9e, 0x80, 0x20, 0x7e, 0x68, 0x0a, 0x8b, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, - 0x12, 0x1a, 0x08, 0x30, 0x09, 0xe6, 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, - 0xa2, 0x00, 0x10, 0x80, 0xf1, 0x7e, 0x68, 0x0d, 0xad, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, - 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x09, 0x0b, 0x00, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, - 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x90, 0xbe, 0xb0, 0x90, 0x78, 0x1f, 0x6c, - 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x90, 0x78, - 0x0d, 0x7e, 0x68, 0x0a, 0x82, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x80, 0x20, 0x7e, 0x68, - 0x0a, 0x8b, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x12, 0x1a, 0x08, 0x30, 0x09, 0x0f, 0x7e, - 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x80, 0xf1, 0x2e, 0x24, - 0x01, 0x00, 0xa5, 0xd9, 0xa2, 0x02, 0x18, 0xb7, 0x30, 0x17, 0x03, 0x02, 0x19, 0x3b, 0xc2, 0x8a, - 0x12, 0x19, 0x22, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x09, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x04, - 0x12, 0x19, 0xee, 0x0b, 0x00, 0x7e, 0xa0, 0x08, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x20, - 0x8b, 0x3e, 0x20, 0x89, 0x3b, 0x7e, 0xa0, 0x08, 0x19, 0xa2, 0x00, 0x04, 0x09, 0xa2, 0x00, 0x10, - 0x4e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x30, 0x8b, 0x23, 0x30, 0x89, 0x20, - 0x09, 0xa2, 0x00, 0x10, 0x5e, 0xa0, 0xfd, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, 0x7e, 0xa0, - 0x00, 0x19, 0xa2, 0x00, 0x04, 0x12, 0x19, 0xee, 0x20, 0x8b, 0x05, 0x20, 0x89, 0x02, 0x80, 0x1a, - 0x12, 0x1a, 0x08, 0x30, 0x09, 0x14, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x00, 0x00, 0x5e, - 0xa0, 0xfd, 0x19, 0xa2, 0x00, 0x10, 0x00, 0x00, 0x80, 0xec, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, - 0x89, 0x02, 0x19, 0x3b, 0x20, 0x17, 0xfa, 0x12, 0x13, 0x8a, 0x12, 0x19, 0x22, 0x7e, 0x24, 0x80, - 0x00, 0x7e, 0x11, 0x09, 0x0b, 0x00, 0x20, 0x89, 0x26, 0x7e, 0xa0, 0xff, 0x19, 0xa2, 0x00, 0x04, - 0x12, 0x19, 0xee, 0x7e, 0xb0, 0x55, 0x19, 0xb2, 0x00, 0x00, 0x12, 0x19, 0xee, 0x30, 0x89, 0x0f, - 0x7e, 0xa0, 0x00, 0x19, 0xa2, 0x00, 0x04, 0x12, 0x19, 0xee, 0x20, 0x89, 0x02, 0x80, 0x26, 0x12, - 0x1a, 0x08, 0x30, 0x09, 0x20, 0x7e, 0xa0, 0xff, 0x19, 0xa2, 0x00, 0x04, 0x12, 0x19, 0xee, 0x7e, - 0xb0, 0x55, 0x19, 0xb2, 0x00, 0x00, 0x12, 0x19, 0xee, 0x7e, 0xa0, 0x00, 0x19, 0xa2, 0x00, 0x04, - 0x12, 0x19, 0xee, 0x80, 0xe0, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xa8, 0x02, 0x19, 0x3b, 0x7e, - 0x24, 0x80, 0x00, 0x7e, 0x11, 0x09, 0x7e, 0xa0, 0x08, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x19, 0xee, - 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xef, 0x22, 0x30, 0x0a, 0x19, 0x7e, 0x68, 0x0d, 0xf5, 0x7a, - 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0xd2, 0x09, 0x12, 0x19, 0xee, 0x12, 0x19, 0xee, 0x12, 0x19, - 0xee, 0x02, 0x0f, 0x10, 0x30, 0x17, 0x1c, 0x7e, 0x68, 0x0e, 0x6f, 0x7a, 0x6c, 0x00, 0xff, 0x12, - 0x1a, 0x93, 0x7e, 0x68, 0x0e, 0x91, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x1a, 0x93, 0x12, 0x1b, 0x3c, - 0x02, 0x19, 0xe6, 0x0b, 0x00, 0x7e, 0x78, 0x19, 0xa0, 0x7a, 0x7c, 0x00, 0xff, 0x7f, 0x67, 0x7a, - 0x6c, 0x00, 0x00, 0x7e, 0x70, 0x3e, 0x7e, 0x7b, 0xb0, 0x7a, 0x6b, 0xb0, 0x0b, 0x7c, 0x0b, 0x6c, - 0xa5, 0xdf, 0xf3, 0x7e, 0x78, 0x19, 0xa0, 0x7a, 0x7c, 0x00, 0x00, 0x89, 0x78, 0x7e, 0x78, 0x00, - 0x00, 0x7a, 0x7c, 0x00, 0xfe, 0x7e, 0x68, 0x7f, 0xbf, 0x7a, 0x6c, 0x00, 0xfe, 0x74, 0xaa, 0x39, - 0xb7, 0x55, 0x55, 0x74, 0x55, 0x39, 0xb7, 0x2a, 0xaa, 0x74, 0xa0, 0x39, 0xb7, 0x55, 0x55, 0x6c, - 0x99, 0x7a, 0x6b, 0x90, 0x7e, 0x54, 0x27, 0x10, 0x7e, 0x6b, 0x80, 0xbc, 0x89, 0x68, 0x08, 0x1b, - 0x54, 0x78, 0xf5, 0x8a, 0xff, 0x19, 0xde, 0x8a, 0xff, 0x19, 0xe6, 0x12, 0x1a, 0x08, 0x7e, 0x6b, - 0x80, 0x80, 0xfb, 0x7e, 0x10, 0xff, 0x12, 0x1a, 0x85, 0x80, 0xf8, 0xca, 0xf9, 0x7e, 0xf4, 0x00, - 0xff, 0x1b, 0xf4, 0x78, 0xfc, 0xda, 0xf9, 0x22, 0xca, 0xf9, 0x7e, 0xf4, 0x00, 0x00, 0x1b, 0xf4, - 0x78, 0xfc, 0xda, 0xf9, 0x22, 0x20, 0x09, 0x19, 0xd2, 0x0a, 0x12, 0x19, 0xfb, 0xc2, 0x95, 0xd2, - 0x94, 0x12, 0x19, 0xfb, 0x12, 0x19, 0xfb, 0x12, 0x19, 0xfb, 0x12, 0x19, 0xfb, 0x43, 0x90, 0x30, - 0x22, 0xca, 0x0b, 0x7e, 0x10, 0x03, 0x7c, 0x30, 0x6c, 0x22, 0x0b, 0x20, 0x9e, 0x30, 0x0a, 0x50, - 0xf9, 0x2e, 0x30, 0x0b, 0x1b, 0x20, 0x68, 0x18, 0x12, 0x19, 0xfb, 0x12, 0x19, 0xfb, 0x53, 0x90, - 0xcf, 0x12, 0x19, 0xfb, 0x12, 0x19, 0xfb, 0x12, 0x19, 0xfb, 0x43, 0x90, 0x30, 0xa5, 0xda, 0xe8, - 0x12, 0x19, 0xfb, 0x12, 0x19, 0xfb, 0x1b, 0x30, 0x68, 0x19, 0x12, 0x19, 0xfb, 0x12, 0x19, 0xfb, - 0xc2, 0x95, 0xd2, 0x94, 0x12, 0x19, 0xfb, 0x12, 0x19, 0xfb, 0x12, 0x19, 0xfb, 0x43, 0x90, 0x30, - 0xa5, 0xdb, 0xe7, 0x7e, 0x20, 0x0a, 0x12, 0x19, 0xfb, 0xa5, 0xda, 0xfa, 0xa5, 0xd9, 0xa7, 0xda, - 0x0b, 0x22, 0x20, 0x09, 0x0a, 0x12, 0x19, 0xfb, 0xb2, 0x94, 0x12, 0x19, 0xfb, 0xb2, 0x94, 0x22, - 0x30, 0x17, 0x32, 0x20, 0x09, 0x2f, 0xca, 0x2b, 0xca, 0x7b, 0x7e, 0x78, 0x80, 0x00, 0x7a, 0x7c, - 0x00, 0xfe, 0x12, 0x1b, 0x1c, 0x7e, 0x6b, 0xa0, 0x5c, 0xaa, 0x68, 0x10, 0x29, 0xb7, 0x00, 0x14, - 0x54, 0x60, 0x68, 0xf8, 0x39, 0xa7, 0x00, 0x00, 0x0b, 0x6c, 0x80, 0xe9, 0x12, 0x19, 0xee, 0xd2, - 0xb5, 0xda, 0x7b, 0xda, 0x2b, 0x22, 0x12, 0x1a, 0xd4, 0x7e, 0x68, 0x00, 0x0b, 0x12, 0x1a, 0x93, - 0x22, 0xca, 0x59, 0xca, 0x5b, 0x7e, 0xb4, 0x00, 0x0b, 0x7c, 0xb8, 0xc4, 0x12, 0x1b, 0x04, 0x7c, - 0xb8, 0x12, 0x1b, 0x04, 0x7c, 0xb9, 0xc4, 0x12, 0x1b, 0x04, 0x7c, 0xb9, 0x12, 0x1b, 0x04, 0x7e, - 0xb0, 0x68, 0x7a, 0xb9, 0xb0, 0x0b, 0xb4, 0x6c, 0xbb, 0x7a, 0xb9, 0xb0, 0xda, 0x59, 0xda, 0x5b, - 0x22, 0x5e, 0xb0, 0x0f, 0x7c, 0xab, 0x9e, 0xa0, 0x0a, 0x40, 0x05, 0x2e, 0xb0, 0x37, 0x80, 0x03, - 0x2e, 0xb0, 0x30, 0x7a, 0xb9, 0xb0, 0x0b, 0xb4, 0x22, 0xc2, 0xb5, 0xc2, 0x92, 0x12, 0x19, 0xee, - 0x74, 0x80, 0x39, 0xb7, 0x00, 0x0c, 0x7e, 0x54, 0x00, 0x06, 0x39, 0xa7, 0x00, 0x04, 0x39, 0xb7, - 0x00, 0x00, 0x74, 0x03, 0x39, 0xb7, 0x00, 0x0c, 0x22, 0x7e, 0x78, 0x00, 0x00, 0x7a, 0x7c, 0x00, - 0xff, 0x7e, 0x58, 0x00, 0x00, 0x7a, 0x5c, 0x00, 0x01, 0x7f, 0x65, 0x7e, 0x74, 0x20, 0x00, 0x12, - 0x08, 0xd6, 0x40, 0x54, 0x7e, 0x78, 0x7c, 0x00, 0x7a, 0x7c, 0x00, 0xff, 0x7e, 0x58, 0x00, 0x00, - 0x7a, 0x5c, 0x00, 0x01, 0x7e, 0x68, 0x7c, 0x00, 0x7a, 0x6c, 0x00, 0x01, 0x7e, 0x74, 0x04, 0x00, - 0x12, 0x08, 0xd6, 0x40, 0x33, 0x74, 0x80, 0x12, 0x1b, 0xb1, 0x40, 0x2c, 0x53, 0x90, 0xcf, 0xd2, - 0x08, 0x7e, 0x04, 0x00, 0x08, 0x7e, 0x14, 0x00, 0x00, 0x84, 0xa5, 0xdb, 0xfc, 0xa5, 0xda, 0xf9, - 0xa5, 0xd9, 0xf6, 0x74, 0x40, 0x12, 0x1b, 0xb1, 0x40, 0x0e, 0x7e, 0x68, 0x0e, 0xc0, 0x7a, 0x6c, - 0x00, 0xff, 0x12, 0x1a, 0x93, 0x02, 0x19, 0xe6, 0xc2, 0x95, 0xd2, 0x94, 0x80, 0xfe, 0xf5, 0x0a, - 0x7e, 0x78, 0x00, 0x0a, 0x7a, 0x7c, 0x00, 0x00, 0x7e, 0x68, 0x7f, 0xbf, 0x7a, 0x6c, 0x00, 0x01, - 0x7e, 0x74, 0x00, 0x01, 0x02, 0x08, 0xd6, -}; - -static struct edge_firmware_version_info IMAGE_VERSION_NAME = { - 1, 12, 2 }; // Major, Minor, Build - -#undef IMAGE_VERSION_NAME - -#undef IMAGE_ARRAY_NAME - diff --git a/drivers/usb/serial/io_fw_boot2.h b/drivers/usb/serial/io_fw_boot2.h deleted file mode 100644 index e3463de99de4..000000000000 --- a/drivers/usb/serial/io_fw_boot2.h +++ /dev/null @@ -1,546 +0,0 @@ -//************************************************************** -//* Edgeport/4 Binary Image -//* Generated by HEX2C v1.06 -//* Copyright (C) 1998 Inside Out Networks, All rights reserved. -//* This program is free software; you can redistribute it and/or modify -//* it under the terms of the GNU General Public License as published by -//* the Free Software Foundation; either version 2 of the License, or -//* (at your option) any later version. -//************************************************************** - - -//Image structure definition -#if !defined(DEFINED_EDGE_FIRMWARE_IMAGE_RECORD) -#define DEFINED_EDGE_FIRMWARE_IMAGE_RECORD - struct edge_firmware_image_record { - __le16 ExtAddr; - __le16 Addr; - __le16 Len; - unsigned char Data[0]; - } __attribute__ ((packed)); - - struct edge_firmware_version_info { - unsigned char MajorVersion; - unsigned char MinorVersion; - unsigned short BuildNumber; - }; - -#endif - -#if !defined(IMAGE_ARRAY_NAME) -#define IMAGE_ARRAY_NAME FirmwareImage -#define IMAGE_VERSION_NAME FirmwareImageVersion -#endif - -static unsigned char IMAGE_ARRAY_NAME[] = { - -// Segment #1, Start Address 00ff0000, Length 6 -0xff,0x00,0x00,0x00,0x06,0x00, - 0x02, 0x00, 0x80, 0x02, 0x00, 0x03, - -// Segment #2, Start Address 00ff000b, Length 3 -0xff,0x00,0x0b,0x00,0x03,0x00, - 0x02, 0x00, 0x0b, - -// Segment #3, Start Address 00ff0013, Length 3 -0xff,0x00,0x13,0x00,0x03,0x00, - 0x02, 0x02, 0x56, - -// Segment #4, Start Address 00ff001b, Length 3 -0xff,0x00,0x1b,0x00,0x03,0x00, - 0x02, 0x00, 0x1b, - -// Segment #5, Start Address 00ff0023, Length 3 -0xff,0x00,0x23,0x00,0x03,0x00, - 0x02, 0x00, 0x23, - -// Segment #6, Start Address 00ff002b, Length 3 -0xff,0x00,0x2b,0x00,0x03,0x00, - 0x02, 0x00, 0x2b, - -// Segment #7, Start Address 00ff0033, Length 3 -0xff,0x00,0x33,0x00,0x03,0x00, - 0x02, 0x00, 0x33, - -// Segment #8, Start Address 00ff003b, Length 3 -0xff,0x00,0x3b,0x00,0x03,0x00, - 0x02, 0x00, 0x3b, - -// Segment #9, Start Address 00ff0043, Length 3 -0xff,0x00,0x43,0x00,0x03,0x00, - 0x02, 0x00, 0x43, - -// Segment #10, Start Address 00ff004b, Length 3 -0xff,0x00,0x4b,0x00,0x03,0x00, - 0x02, 0x00, 0x4b, - -// Segment #11, Start Address 00ff0053, Length 3 -0xff,0x00,0x53,0x00,0x03,0x00, - 0x02, 0x01, 0xf5, - -// Segment #12, Start Address 00ff007b, Length 3 -0xff,0x00,0x7b,0x00,0x03,0x00, - 0x02, 0x00, 0x7b, - -// Segment #13, Start Address 00ff0080, Length 534 -0xff,0x00,0x80,0x00,0x16,0x02, - 0x7e, 0xb3, 0x91, 0x01, 0x20, 0xe3, 0x0c, 0x7e, 0xb3, 0x3f, 0xf2, 0x54, 0xfe, 0x7a, 0xb3, 0x3f, - 0xf2, 0x80, 0x0a, 0x7e, 0xb3, 0x3f, 0xf2, 0x44, 0x01, 0x7a, 0xb3, 0x3f, 0xf2, 0x74, 0x00, 0x7a, - 0xb3, 0x91, 0x00, 0x74, 0x01, 0x7a, 0xb3, 0x91, 0x12, 0x7e, 0xf8, 0x00, 0x24, 0x7e, 0x00, 0x01, - 0x7e, 0x10, 0x00, 0x12, 0x09, 0xd0, 0x69, 0x20, 0x00, 0x0a, 0x5e, 0x40, 0x1f, 0xbe, 0x24, 0x00, - 0x00, 0x78, 0x09, 0x7e, 0x00, 0x03, 0x7a, 0x03, 0x90, 0x00, 0x80, 0x07, 0x7e, 0x00, 0x02, 0x7a, - 0x03, 0x90, 0x00, 0x75, 0xb0, 0xdf, 0x7e, 0x00, 0x01, 0x7a, 0x03, 0x94, 0x00, 0x7a, 0x03, 0x01, - 0x24, 0x7e, 0x00, 0x01, 0x7a, 0x03, 0x93, 0x00, 0x7e, 0x00, 0x00, 0xa5, 0xd8, 0xfd, 0x75, 0xa8, - 0x00, 0x75, 0xb1, 0x00, 0xca, 0x29, 0x12, 0x0c, 0x66, 0x12, 0x0c, 0x37, 0xf5, 0x21, 0x7a, 0xa1, - 0x20, 0x20, 0x09, 0x08, 0x20, 0x0a, 0x0a, 0x7e, 0xb0, 0x0c, 0x80, 0x08, 0x7e, 0xb0, 0x00, 0x80, - 0x03, 0x7e, 0xb0, 0x08, 0x7a, 0xb3, 0x92, 0x00, 0x12, 0x02, 0x96, 0xda, 0x29, 0x74, 0x10, 0x7a, - 0xb3, 0x91, 0x01, 0x7e, 0x20, 0x04, 0x7c, 0xb2, 0xc2, 0xd7, 0x13, 0x13, 0x13, 0x13, 0x7a, 0xb3, - 0x91, 0x00, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x10, 0x74, 0x60, 0x7a, 0xb3, 0x91, 0x1c, 0x74, 0x02, - 0x7a, 0xb3, 0x91, 0x12, 0xa5, 0xda, 0xdf, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x60, 0x7a, - 0xb3, 0x91, 0x1c, 0x74, 0x10, 0x7a, 0xb3, 0x91, 0x06, 0x74, 0x10, 0x7a, 0xb3, 0x91, 0x07, 0x74, - 0x34, 0x7a, 0xb3, 0x91, 0x13, 0x74, 0x3f, 0x7a, 0xb3, 0x91, 0x14, 0x74, 0x02, 0x7a, 0xb3, 0x91, - 0x06, 0x74, 0x01, 0x7a, 0xb3, 0x91, 0x07, 0x74, 0x03, 0x7a, 0xb3, 0x91, 0x06, 0x74, 0x44, 0x7a, - 0xb3, 0x91, 0x07, 0x74, 0xef, 0x7a, 0xb3, 0x91, 0x04, 0x74, 0x07, 0x7a, 0xb3, 0x91, 0x06, 0x7e, - 0xb3, 0x91, 0x07, 0x7a, 0xb1, 0x0a, 0x75, 0x09, 0x01, 0xd2, 0xaa, 0xd2, 0xaf, 0xe4, 0x7e, 0x60, - 0x02, 0x4d, 0x22, 0x78, 0x03, 0x7e, 0x60, 0x03, 0x7c, 0x76, 0x7e, 0x04, 0x28, 0x00, 0x8d, 0xef, - 0x1b, 0x04, 0x78, 0xfa, 0x04, 0x7e, 0x20, 0x07, 0x7a, 0x23, 0x91, 0x06, 0x7e, 0x23, 0x91, 0x07, - 0x7e, 0x31, 0x0a, 0xbc, 0x32, 0x68, 0x22, 0x7a, 0x21, 0x0a, 0x7e, 0x21, 0x09, 0x68, 0x17, 0xca, - 0xb8, 0x74, 0x03, 0x7a, 0xb3, 0x91, 0x06, 0x7e, 0xb3, 0x91, 0x07, 0x44, 0x02, 0x7a, 0xb3, 0x91, - 0x07, 0xda, 0xb8, 0x75, 0x09, 0x00, 0x30, 0xe0, 0xc1, 0x6c, 0x67, 0x7a, 0x63, 0x90, 0x00, 0x80, - 0xb9, 0xbe, 0xb0, 0x02, 0x22, 0xc0, 0xd0, 0x75, 0x08, 0xfe, 0x12, 0x0a, 0xc0, 0x74, 0x02, 0x7a, - 0xb3, 0x91, 0x06, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x07, 0x74, 0x03, 0x7a, 0xb3, 0x91, 0x06, 0x74, - 0x00, 0x7a, 0xb3, 0x91, 0x07, 0x74, 0x02, 0x7a, 0xb3, 0x91, 0x04, 0x7e, 0xb3, 0x3f, 0xf2, 0x30, - 0xe0, 0x08, 0x74, 0x18, 0x7a, 0xb3, 0x91, 0x01, 0x80, 0x06, 0x74, 0x10, 0x7a, 0xb3, 0x91, 0x01, - 0x74, 0x10, 0x7a, 0xb3, 0x91, 0x04, 0x02, 0x02, 0x36, 0x75, 0x08, 0xff, 0x12, 0x0a, 0xc0, 0x74, - 0x01, 0x7a, 0xb3, 0x91, 0x04, 0x74, 0x03, 0x7a, 0xb3, 0x91, 0x06, 0x7e, 0xb3, 0x91, 0x07, 0x54, - 0xfc, 0x7a, 0xb3, 0x91, 0x07, 0x32, 0xca, 0xb8, 0x75, 0x08, 0x02, 0x12, 0x0a, 0xc0, 0x7e, 0xb3, - 0x91, 0x03, 0x20, 0xe5, 0x08, 0x30, 0xe0, 0x2b, 0x12, 0x02, 0x9e, 0x80, 0xf1, 0x7e, 0xb3, 0x91, - 0x04, 0x30, 0xe0, 0x05, 0xda, 0xb8, 0x02, 0x02, 0x39, 0x30, 0xe1, 0x05, 0xda, 0xb8, 0x02, 0x01, - 0xf5, 0x30, 0xe6, 0x05, 0x12, 0x04, 0x03, 0x80, 0xd5, 0x30, 0xe2, 0x05, 0xda, 0xb8, 0x02, 0x00, - 0x80, 0x80, 0xcb, 0xda, 0xb8, 0x32, - -// Segment #14, EXCLUDED Start Address 00ff31d7, Length 1 - - -// Segment #15, Start Address 00ff0296, Length 2090 -0xff,0x00,0x96,0x02,0x2a,0x08, - 0xe4, 0x7a, 0xb3, 0x3f, 0xf1, 0x02, 0x03, 0x41, 0xca, 0x0b, 0xca, 0x1b, 0xca, 0x2b, 0xca, 0x3b, - 0xca, 0x4b, 0xca, 0x5b, 0xca, 0x6b, 0xca, 0x7b, 0xca, 0xeb, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, - 0x7e, 0xb3, 0x01, 0x2e, 0xb4, 0x00, 0x02, 0x80, 0x1c, 0xb4, 0x01, 0x19, 0x7e, 0xb3, 0x91, 0x14, - 0x54, 0x14, 0x68, 0x05, 0x12, 0x03, 0x05, 0x80, 0x23, 0x7e, 0xb3, 0x91, 0x14, 0x30, 0xe5, 0x1c, - 0x12, 0x04, 0x43, 0x80, 0x17, 0x7e, 0xb3, 0x91, 0x14, 0x30, 0xe5, 0x05, 0x12, 0x04, 0x43, 0x80, - 0x0b, 0x7e, 0xb3, 0x91, 0x14, 0x54, 0x14, 0x68, 0x03, 0x12, 0x03, 0x05, 0xda, 0xeb, 0xda, 0x7b, - 0xda, 0x6b, 0xda, 0x5b, 0xda, 0x4b, 0xda, 0x3b, 0xda, 0x2b, 0xda, 0x1b, 0xda, 0x0b, 0x22, 0x20, - 0xe4, 0x19, 0x75, 0x08, 0x0a, 0x12, 0x0a, 0xc0, 0x7e, 0xb3, 0x01, 0x2d, 0x70, 0x0a, 0x7e, 0xb3, - 0x01, 0x2e, 0xb4, 0x01, 0x1f, 0x02, 0x03, 0x9d, 0x02, 0x09, 0x8b, 0x75, 0x08, 0x0b, 0x12, 0x0a, - 0xc0, 0x74, 0x14, 0x7a, 0xb3, 0x91, 0x14, 0x7e, 0xb3, 0x01, 0x2e, 0xb4, 0x02, 0x0c, 0x12, 0x03, - 0x4d, 0x02, 0x03, 0x41, 0x74, 0x04, 0x7a, 0xb3, 0x91, 0x14, 0x22, 0x7e, 0x00, 0x00, 0x7a, 0x03, - 0x01, 0x2e, 0x7a, 0x03, 0x01, 0x2f, 0x22, 0x7e, 0xb3, 0x01, 0x25, 0x54, 0x60, 0x60, 0x05, 0xb4, - 0x40, 0x1e, 0x80, 0x1c, 0x7e, 0xb3, 0x01, 0x26, 0xb4, 0x05, 0x15, 0x75, 0x08, 0x71, 0x12, 0x0a, - 0xc0, 0x7e, 0xb3, 0x01, 0x28, 0x7e, 0xa0, 0x01, 0x7a, 0xa3, 0x91, 0x06, 0x7a, 0xb3, 0x91, 0x07, - 0x22, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x10, 0x7a, 0xb3, 0x91, 0x12, 0x22, 0xbe, 0x57, - 0x01, 0x2b, 0x28, 0x04, 0x7e, 0x57, 0x01, 0x2b, 0x7a, 0x0f, 0x01, 0x31, 0x7a, 0x57, 0x01, 0x35, - 0x74, 0x10, 0x7a, 0xb3, 0x91, 0x12, 0x22, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x7e, 0xb3, 0x91, - 0x1a, 0x70, 0x53, 0x7e, 0xb3, 0x91, 0x14, 0x20, 0xe4, 0x4c, 0x7e, 0xef, 0x01, 0x31, 0x7e, 0xf7, - 0x01, 0x35, 0x7e, 0x07, 0x01, 0x35, 0x4d, 0x00, 0x68, 0x21, 0x7e, 0x00, 0x00, 0xe0, 0x7a, 0xb3, - 0x91, 0x17, 0xa3, 0xa5, 0x08, 0x1b, 0xf4, 0x68, 0x06, 0xa5, 0xb8, 0x10, 0xf0, 0x80, 0x19, 0x7e, - 0xb0, 0x00, 0x7a, 0xb3, 0x01, 0x2e, 0xbe, 0x00, 0x10, 0x68, 0x0d, 0x7e, 0xb0, 0x00, 0x7a, 0xb3, - 0x01, 0x2e, 0x74, 0x80, 0x7a, 0xb3, 0x91, 0x1e, 0x7a, 0xef, 0x01, 0x31, 0x7a, 0xf7, 0x01, 0x35, - 0x75, 0x08, 0x06, 0x12, 0x0a, 0xc0, 0x74, 0x04, 0x7a, 0xb3, 0x91, 0x14, 0x22, 0xca, 0x0b, 0xca, - 0x1b, 0xca, 0x2b, 0xca, 0x3b, 0xca, 0x4b, 0xca, 0x5b, 0xca, 0x6b, 0xca, 0x7b, 0xca, 0xeb, 0x75, - 0x08, 0x03, 0x12, 0x0a, 0xc0, 0x74, 0x00, 0x7a, 0xb3, 0x01, 0x2d, 0x74, 0x00, 0x7a, 0xb3, 0x91, - 0x00, 0x74, 0x01, 0x7a, 0xb3, 0x91, 0x12, 0x12, 0x04, 0xb2, 0xda, 0xeb, 0xda, 0x7b, 0xda, 0x6b, - 0xda, 0x5b, 0xda, 0x4b, 0xda, 0x3b, 0xda, 0x2b, 0xda, 0x1b, 0xda, 0x0b, 0x22, 0x75, 0x08, 0x03, - 0x12, 0x0a, 0xc0, 0x7e, 0xb3, 0x01, 0x2f, 0xb4, 0x02, 0x11, 0x74, 0x00, 0x7a, 0xb3, 0x01, 0x2f, - 0x7a, 0xb3, 0x01, 0x2e, 0x74, 0x20, 0x7a, 0xb3, 0x91, 0x14, 0x22, 0xb4, 0x01, 0x46, 0x7e, 0xb3, - 0x91, 0x04, 0x20, 0xe6, 0x42, 0x7e, 0x23, 0x91, 0x1a, 0x7c, 0x32, 0x7e, 0x13, 0x01, 0x30, 0x2c, - 0x21, 0x7a, 0x23, 0x01, 0x30, 0x7e, 0x00, 0x00, 0x2e, 0x04, 0x01, 0x37, 0x7e, 0xb3, 0x91, 0x16, - 0x7a, 0x09, 0xb0, 0x0b, 0x04, 0xa5, 0xdb, 0xf4, 0x74, 0x20, 0x7a, 0xb3, 0x91, 0x14, 0x75, 0x08, - 0x70, 0x12, 0x0a, 0xc0, 0x7e, 0xb3, 0x01, 0x30, 0x7e, 0xa3, 0x01, 0x2c, 0xbc, 0xab, 0x78, 0x03, - 0x12, 0x05, 0x52, 0x22, 0x02, 0x09, 0x8b, 0xda, 0x59, 0x02, 0x04, 0x15, 0x74, 0xe0, 0x7a, 0xb3, - 0x91, 0x00, 0x7e, 0x03, 0x91, 0x10, 0x7e, 0x13, 0x91, 0x11, 0x7e, 0x33, 0x91, 0x12, 0x7e, 0x23, - 0x91, 0x13, 0x7e, 0x53, 0x91, 0x14, 0x7e, 0x43, 0x91, 0x15, 0x7e, 0x73, 0x91, 0x16, 0x7e, 0x63, - 0x91, 0x17, 0x7a, 0x0f, 0x01, 0x25, 0x7a, 0x1f, 0x01, 0x29, 0x75, 0x08, 0x04, 0x12, 0x0a, 0xc0, - 0x7a, 0x01, 0x08, 0x12, 0x0a, 0xc0, 0x7a, 0x11, 0x08, 0x12, 0x0a, 0xc0, 0x7a, 0x21, 0x08, 0x12, - 0x0a, 0xc0, 0x7a, 0x31, 0x08, 0x12, 0x0a, 0xc0, 0x7a, 0x41, 0x08, 0x12, 0x0a, 0xc0, 0x7a, 0x51, - 0x08, 0x12, 0x0a, 0xc0, 0x7a, 0x61, 0x08, 0x12, 0x0a, 0xc0, 0x7a, 0x71, 0x08, 0x12, 0x0a, 0xc0, - 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x40, 0x7a, 0xb3, 0x91, 0x04, 0x12, 0x05, 0x26, 0x22, - 0x6d, 0x00, 0x7e, 0x14, 0x01, 0x02, 0x7a, 0x07, 0x01, 0x35, 0x7a, 0x03, 0x01, 0x30, 0x7e, 0xb3, - 0x01, 0x25, 0x20, 0xe7, 0x0f, 0x7a, 0x23, 0x01, 0x2f, 0x7a, 0x33, 0x01, 0x2e, 0xbe, 0x07, 0x01, - 0x2b, 0x68, 0x09, 0x22, 0x7a, 0x33, 0x01, 0x2f, 0x7a, 0x23, 0x01, 0x2e, 0x7e, 0xb3, 0x01, 0x25, - 0x54, 0xe3, 0x23, 0x23, 0x30, 0xe0, 0x02, 0xd2, 0xe5, 0x30, 0xe7, 0x02, 0xd2, 0xe4, 0x30, 0xe5, - 0x06, 0x30, 0xe4, 0x03, 0x02, 0x09, 0x8b, 0x54, 0x3e, 0xf5, 0xf0, 0x03, 0x54, 0x1f, 0xc3, 0x25, - 0xf0, 0x90, 0x05, 0x7e, 0x75, 0x84, 0xff, 0x73, 0x02, 0x07, 0x39, 0x02, 0x05, 0xc6, 0x02, 0x07, - 0xd2, 0x02, 0x07, 0xed, 0x02, 0x06, 0xd0, 0x02, 0x06, 0x5b, 0x02, 0x08, 0x1e, 0x02, 0x08, 0x1e, - 0x02, 0x08, 0x21, 0x02, 0x08, 0x21, 0x02, 0x08, 0x21, 0x02, 0x08, 0x21, 0x02, 0x08, 0x21, 0x02, - 0x08, 0x21, 0x02, 0x08, 0x21, 0x02, 0x08, 0x21, 0x02, 0x08, 0x27, 0x02, 0x08, 0xf9, 0x02, 0x08, - 0x24, 0x02, 0x08, 0x24, 0x02, 0x08, 0x24, 0x02, 0x08, 0x24, 0x02, 0x08, 0x24, 0x02, 0x08, 0x24, - 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x60, 0x7a, 0xb3, 0x91, 0x1c, 0x7e, 0xb3, 0x01, 0x26, - 0xb4, 0x06, 0x2a, 0x7e, 0xb3, 0x01, 0x27, 0x60, 0x79, 0x7c, 0x0b, 0x7e, 0x13, 0x01, 0x28, 0x7e, - 0x17, 0x01, 0x29, 0x75, 0x08, 0x72, 0x12, 0x0a, 0xc0, 0x7a, 0x01, 0x08, 0x12, 0x0a, 0xc0, 0x7a, - 0x11, 0x08, 0x12, 0x0a, 0xc0, 0x12, 0x09, 0xd0, 0x40, 0x58, 0x02, 0x03, 0x84, 0xb4, 0x08, 0x1c, - 0x75, 0x08, 0x74, 0x12, 0x0a, 0xc0, 0x7e, 0xb3, 0x3f, 0xf1, 0x7e, 0x08, 0x01, 0x37, 0x7a, 0x0c, - 0x00, 0x00, 0x7a, 0x0b, 0xb0, 0x7e, 0x54, 0x00, 0x01, 0x02, 0x03, 0x84, 0xb4, 0x00, 0x33, 0x75, - 0x08, 0x75, 0x12, 0x0a, 0xc0, 0x7e, 0x08, 0x01, 0x37, 0x7a, 0x0c, 0x00, 0x00, 0xca, 0x0b, 0x7e, - 0xb3, 0x3f, 0xf2, 0x30, 0xe0, 0x07, 0x74, 0x02, 0x7a, 0x0b, 0xb0, 0x80, 0x05, 0x74, 0x00, 0x7a, - 0x0b, 0xb0, 0x0b, 0x14, 0x74, 0x00, 0x7a, 0x0b, 0xb0, 0x7e, 0x54, 0x00, 0x02, 0xda, 0x0b, 0x02, - 0x03, 0x84, 0x02, 0x09, 0x8b, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x60, 0x7a, 0xb3, 0x91, - 0x1c, 0x7e, 0xb3, 0x01, 0x26, 0xb4, 0x00, 0x5f, 0x75, 0x08, 0x76, 0x12, 0x0a, 0xc0, 0x7e, 0xb3, - 0x01, 0x2a, 0x54, 0x0f, 0xb4, 0x02, 0x05, 0x7e, 0xb0, 0x60, 0x80, 0x17, 0xb4, 0x00, 0x05, 0x7e, - 0xb0, 0x00, 0x80, 0x0f, 0x7e, 0xb3, 0x01, 0x2a, 0x20, 0xe7, 0x05, 0x7e, 0xb0, 0x40, 0x80, 0x03, - 0x7e, 0xb0, 0x20, 0x7a, 0xb3, 0x91, 0x00, 0x7e, 0xb3, 0x91, 0x11, 0x30, 0xe0, 0x04, 0x74, 0x01, - 0x80, 0x02, 0x74, 0x00, 0x7e, 0x08, 0x01, 0x37, 0x7a, 0x0c, 0x00, 0x00, 0xca, 0x0b, 0x7a, 0x0b, - 0xb0, 0x0b, 0x14, 0x74, 0x00, 0x7a, 0x0b, 0xb0, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x7e, 0x54, - 0x00, 0x02, 0xda, 0x0b, 0x02, 0x03, 0x84, 0x02, 0x09, 0x8b, 0x7e, 0xb3, 0x01, 0x2a, 0x54, 0x0f, - 0xb4, 0x02, 0x05, 0x7e, 0xb0, 0x60, 0x80, 0x17, 0xb4, 0x00, 0x05, 0x7e, 0xb0, 0x00, 0x80, 0x0f, - 0x7e, 0xb3, 0x01, 0x2a, 0x20, 0xe7, 0x05, 0x7e, 0xb0, 0x40, 0x80, 0x03, 0x7e, 0xb0, 0x20, 0x7a, - 0xb3, 0x91, 0x00, 0x7e, 0xb3, 0x01, 0x28, 0xb4, 0x00, 0x26, 0x7e, 0xb3, 0x01, 0x26, 0xb4, 0x01, - 0x0e, 0x75, 0x08, 0x77, 0x12, 0x0a, 0xc0, 0x74, 0x01, 0x7a, 0xb3, 0x91, 0x12, 0x80, 0x1b, 0xb4, - 0x03, 0x0e, 0x75, 0x08, 0x78, 0x12, 0x0a, 0xc0, 0x74, 0x01, 0x7a, 0xb3, 0x91, 0x11, 0x80, 0x0a, - 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x12, 0x09, 0x8b, 0x22, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, - 0x02, 0x03, 0x77, 0x7e, 0xb3, 0x01, 0x26, 0xb4, 0x09, 0x1f, 0x75, 0x08, 0x79, 0x12, 0x0a, 0xc0, - 0x7e, 0xb3, 0x01, 0x28, 0xbe, 0xb3, 0x3f, 0xf1, 0x68, 0x0d, 0xca, 0xb8, 0x12, 0x01, 0xf1, 0xda, - 0xb8, 0x50, 0x76, 0x7a, 0xb3, 0x3f, 0xf1, 0x80, 0x6d, 0xb4, 0x05, 0x08, 0x75, 0x08, 0x7a, 0x12, - 0x0a, 0xc0, 0x80, 0x62, 0xb4, 0x03, 0x19, 0x75, 0x08, 0x7b, 0x12, 0x0a, 0xc0, 0x7e, 0xb3, 0x01, - 0x28, 0xb4, 0x01, 0x55, 0x7e, 0xb3, 0x3f, 0xf2, 0x44, 0x01, 0x7a, 0xb3, 0x3f, 0xf2, 0x80, 0x46, - 0xb4, 0x01, 0x19, 0x75, 0x08, 0x7c, 0x12, 0x0a, 0xc0, 0x7e, 0xb3, 0x01, 0x28, 0xb4, 0x01, 0x39, - 0x7e, 0xb3, 0x3f, 0xf2, 0x54, 0xfe, 0x7a, 0xb3, 0x3f, 0xf2, 0x80, 0x2a, 0xb4, 0x07, 0x2a, 0x7e, - 0xb3, 0x01, 0x27, 0x60, 0x24, 0x7c, 0x0b, 0x7e, 0x13, 0x01, 0x28, 0x7e, 0x17, 0x01, 0x29, 0x75, - 0x08, 0x73, 0x12, 0x0a, 0xc0, 0x7a, 0x01, 0x08, 0x12, 0x0a, 0xc0, 0x7a, 0x11, 0x08, 0x12, 0x0a, - 0xc0, 0x12, 0x0a, 0x0a, 0x40, 0x03, 0x02, 0x03, 0x77, 0x02, 0x09, 0x8b, 0x7e, 0xb3, 0x01, 0x26, - 0xb4, 0x0b, 0xf6, 0x75, 0x08, 0x7d, 0x12, 0x0a, 0xc0, 0x7e, 0xb3, 0x01, 0x28, 0x7e, 0xa3, 0x01, - 0x2a, 0x4c, 0xab, 0x78, 0xe4, 0x80, 0xdf, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x60, 0x7a, - 0xb3, 0x91, 0x1c, 0x7e, 0xb3, 0x01, 0x26, 0xb4, 0x0a, 0xcf, 0x75, 0x08, 0x7e, 0x12, 0x0a, 0xc0, - 0x7e, 0xb3, 0x01, 0x28, 0x70, 0xc3, 0x7e, 0x08, 0x01, 0x37, 0x7a, 0x0c, 0x00, 0x00, 0x7a, 0x0b, - 0xb0, 0x7e, 0x54, 0x00, 0x01, 0x02, 0x03, 0x84, 0x02, 0x09, 0x8b, 0x02, 0x09, 0x8b, 0x02, 0x09, - 0x8b, 0x7e, 0xb3, 0x01, 0x26, 0xb4, 0x04, 0x20, 0x75, 0x08, 0xc3, 0x12, 0x0a, 0xc0, 0x7e, 0x04, - 0x00, 0x01, 0x7e, 0x17, 0x01, 0x27, 0x7e, 0x18, 0x01, 0x37, 0x7a, 0x1c, 0x00, 0x00, 0x7e, 0x47, - 0x01, 0x2b, 0x12, 0x0a, 0xcc, 0x02, 0x08, 0xf3, 0xb4, 0x06, 0x42, 0x75, 0x08, 0xc1, 0x12, 0x0a, - 0xc0, 0x7e, 0x58, 0x00, 0x00, 0x7a, 0x5c, 0x00, 0xfe, 0x7d, 0xca, 0x7e, 0xd7, 0x01, 0x27, 0x7e, - 0x78, 0x01, 0x37, 0x7a, 0x7c, 0x00, 0x00, 0x7e, 0x77, 0x01, 0x2b, 0x75, 0x08, 0xc1, 0x12, 0x0a, - 0xc0, 0xc0, 0xa8, 0xc2, 0xaf, 0x7e, 0x40, 0x01, 0x7a, 0x43, 0x94, 0x00, 0x12, 0x0b, 0x63, 0x7e, - 0x43, 0x01, 0x24, 0x7a, 0x43, 0x94, 0x00, 0xd0, 0xa8, 0x40, 0x65, 0x80, 0x60, 0xb4, 0x00, 0x24, - 0xc2, 0xaf, 0x7e, 0xb0, 0x01, 0x7a, 0xb3, 0x94, 0x00, 0x7a, 0xb3, 0x01, 0x24, 0x12, 0x03, 0x77, - 0xe4, 0x8d, 0xef, 0x8d, 0xef, 0x8d, 0xef, 0xd5, 0xe0, 0xf7, 0xc0, 0xd1, 0xca, 0x02, 0xff, 0xca, - 0x06, 0x00, 0x00, 0x32, 0xb4, 0x09, 0x20, 0x74, 0x03, 0x7a, 0xb3, 0x91, 0x06, 0x7e, 0x23, 0x91, - 0x07, 0x7e, 0x57, 0x01, 0x27, 0x4d, 0x55, 0x68, 0x05, 0x4e, 0x20, 0x02, 0x80, 0x03, 0x5e, 0x20, - 0xfd, 0x7a, 0x23, 0x91, 0x07, 0x80, 0x16, 0xb4, 0x07, 0x16, 0xc2, 0xaf, 0x7e, 0x07, 0x01, 0x29, - 0x7e, 0x17, 0x01, 0x27, 0xc0, 0xd1, 0xca, 0x18, 0xca, 0x38, 0xca, 0x28, 0x32, 0x02, 0x03, 0x77, - 0x02, 0x09, 0x8b, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x60, 0x7a, 0xb3, 0x91, 0x1c, 0x7e, - 0xb3, 0x01, 0x26, 0xb4, 0x03, 0x15, 0x75, 0x08, 0xc2, 0x12, 0x0a, 0xc0, 0x7e, 0x04, 0x00, 0x01, - 0x7e, 0x17, 0x01, 0x27, 0x7e, 0x57, 0x01, 0x2b, 0x02, 0x03, 0x84, 0xb4, 0x05, 0x41, 0x75, 0x08, - 0xc0, 0x12, 0x0a, 0xc0, 0xc0, 0xa8, 0xc2, 0xaf, 0x7e, 0x40, 0x01, 0x7a, 0x43, 0x94, 0x00, 0x7e, - 0x08, 0x01, 0x37, 0x7a, 0x0c, 0x00, 0x00, 0x7e, 0x24, 0x00, 0xfe, 0x7e, 0x37, 0x01, 0x27, 0x7e, - 0x47, 0x01, 0x2b, 0x12, 0x0a, 0xcc, 0x7e, 0x43, 0x01, 0x24, 0x7a, 0x43, 0x94, 0x00, 0xd0, 0xa8, - 0x7e, 0x08, 0x01, 0x37, 0x7a, 0x0c, 0x00, 0x00, 0x7e, 0x57, 0x01, 0x2b, 0x02, 0x03, 0x84, 0xb4, - 0x01, 0x20, 0x7e, 0x00, 0x00, 0x7e, 0x10, 0x01, 0x75, 0x08, 0x72, 0x12, 0x0a, 0xc0, 0x7a, 0x01, - 0x08, 0x12, 0x0a, 0xc0, 0x7a, 0x11, 0x08, 0x12, 0x0a, 0xc0, 0x12, 0x09, 0xd0, 0x40, 0x03, 0x02, - 0x03, 0x84, 0x02, 0x09, 0x8b, 0x75, 0x08, 0x07, 0x12, 0x0a, 0xc0, 0x7e, 0xb0, 0x02, 0x7a, 0xb3, - 0x90, 0x00, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x40, 0x7a, 0xb3, 0x91, 0x15, 0x74, 0x01, - 0x7a, 0xb3, 0x91, 0x11, 0x7e, 0xb3, 0x91, 0x15, 0x54, 0x60, 0xbe, 0xb0, 0x40, 0x68, 0x08, 0x74, - 0x20, 0x7a, 0xb3, 0x91, 0x15, 0x80, 0xed, 0x74, 0x01, 0x7a, 0xb3, 0x91, 0x12, 0x74, 0x04, 0x7a, - 0xb3, 0x91, 0x14, 0x74, 0xff, 0x7a, 0xb3, 0x01, 0x2d, 0x22, 0xc0, 0xa8, 0xc2, 0xaf, 0x7e, 0x40, - 0x01, 0x7a, 0x43, 0x94, 0x00, 0x12, 0x0a, 0x57, 0x40, 0x1f, 0x7e, 0x08, 0x01, 0x37, 0x7a, 0x0c, - 0x00, 0x00, 0xca, 0x0b, 0xca, 0x49, 0x12, 0x0a, 0xcc, 0xda, 0x59, 0xda, 0x0b, 0x7e, 0x43, 0x01, - 0x24, 0x7a, 0x43, 0x94, 0x00, 0xd0, 0xa8, 0xc3, 0x22, 0x7e, 0x43, 0x01, 0x24, 0x7a, 0x43, 0x94, - 0x00, 0xd0, 0xa8, 0x22, 0xc0, 0xa8, 0xc2, 0xaf, 0x7e, 0x40, 0x01, 0x7a, 0x43, 0x94, 0x00, 0x12, - 0x0a, 0x57, 0x40, 0x31, 0x7e, 0x58, 0x00, 0x00, 0x7a, 0x5c, 0x00, 0xfe, 0x7f, 0x61, 0x7e, 0x78, - 0x01, 0x37, 0x7a, 0x7c, 0x00, 0x00, 0x7e, 0x77, 0x01, 0x2b, 0xbd, 0x74, 0x78, 0x17, 0x75, 0x08, - 0xc1, 0x12, 0x0a, 0xc0, 0x12, 0x0b, 0x63, 0x40, 0x0c, 0x7e, 0x43, 0x01, 0x24, 0x7a, 0x43, 0x94, - 0x00, 0xd0, 0xa8, 0xc3, 0x22, 0x7e, 0x43, 0x01, 0x24, 0x7a, 0x43, 0x94, 0x00, 0xd0, 0xa8, 0xd3, - 0x22, 0x7e, 0x24, 0x00, 0xfe, 0x7e, 0x34, 0x7f, 0xca, 0x0b, 0x1a, 0x50, 0xc5, 0xf0, 0x7d, 0x62, - 0x7d, 0x75, 0x7d, 0x87, 0x7e, 0x34, 0x7f, 0x03, 0x7e, 0x1b, 0xb0, 0xbc, 0x0b, 0x50, 0x49, 0x3e, - 0x00, 0x3e, 0x00, 0x0a, 0x50, 0x2d, 0x75, 0x0b, 0x3a, 0x30, 0x69, 0x53, 0x00, 0x02, 0xbd, 0x38, - 0x50, 0x02, 0x2d, 0x38, 0xbc, 0x1b, 0x50, 0x30, 0x3e, 0x10, 0x3e, 0x10, 0x0a, 0x51, 0x2d, 0x35, - 0x69, 0x41, 0x00, 0x02, 0x0b, 0x1a, 0x30, 0xbd, 0x38, 0x50, 0x02, 0x2d, 0x38, 0xbe, 0x44, 0xff, - 0xff, 0x78, 0x05, 0x7e, 0x1b, 0x90, 0x0a, 0x49, 0x4d, 0x44, 0x68, 0x0c, 0xbe, 0x44, 0x00, 0xff, - 0x28, 0x04, 0x7e, 0x44, 0x00, 0xff, 0xc3, 0x22, 0xd3, 0x22, - -// Segment #16, EXCLUDED Start Address 00ff7c00, Length 227 - - -// Segment #17, EXCLUDED Start Address 00ff7f00, Length 192 - - -// Segment #17, Start Address 00ff7fc0, Length 64 -0xff,0x00,0xc0,0x7f,0x40,0x00, - 0x40, 0x01, 0x02, 0x00, 0xd7, 0x31, 0x02, 0x00, 0x03, 0x00, 0x00, 0x7c, 0x00, 0x00, 0x01, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf1, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - -// Segment #18, Start Address 00ff0ac0, Length 4163 -0xff,0x00,0xc0,0x0a,0x43,0x10, - 0xca, 0x08, 0x7e, 0x01, 0x08, 0x7a, 0x03, 0x3f, 0xf0, 0xda, 0x08, 0x22, 0x80, 0x50, 0x0b, 0x1a, - 0x60, 0x0b, 0x35, 0x0b, 0x1a, 0x70, 0x0b, 0x35, 0x0b, 0x1a, 0x80, 0x0b, 0x35, 0x0b, 0x1a, 0x90, - 0x0b, 0x35, 0x0b, 0x1a, 0xa0, 0x0b, 0x35, 0x0b, 0x1a, 0xb0, 0x0b, 0x35, 0x0b, 0x1a, 0xc0, 0x0b, - 0x35, 0x0b, 0x1a, 0xd0, 0x0b, 0x35, 0x1b, 0x0a, 0x60, 0x0b, 0x15, 0x1b, 0x0a, 0x70, 0x0b, 0x15, - 0x1b, 0x0a, 0x80, 0x0b, 0x15, 0x1b, 0x0a, 0x90, 0x0b, 0x15, 0x1b, 0x0a, 0xa0, 0x0b, 0x15, 0x1b, - 0x0a, 0xb0, 0x0b, 0x15, 0x1b, 0x0a, 0xc0, 0x0b, 0x15, 0x1b, 0x0a, 0xd0, 0x0b, 0x15, 0x9e, 0x44, - 0x00, 0x10, 0x50, 0xaa, 0x2e, 0x44, 0x00, 0x10, 0x68, 0x0e, 0x7e, 0x1b, 0xc0, 0x7a, 0x0b, 0xc0, - 0x0b, 0x14, 0x0b, 0x34, 0x1b, 0x44, 0x78, 0xf2, 0x22, 0x7f, 0x6f, 0x7f, 0xf0, 0x1b, 0xfc, 0x7c, - 0x54, 0x7d, 0x32, 0x80, 0x08, 0xca, 0x1b, 0xca, 0x1b, 0xca, 0x1b, 0xca, 0x1b, 0x9e, 0x44, 0x00, - 0x10, 0x50, 0xf2, 0x2e, 0x44, 0x00, 0x10, 0x68, 0x06, 0xca, 0x48, 0x1b, 0x44, 0x78, 0xfa, 0x7f, - 0xf6, 0x89, 0xe4, 0xca, 0x6b, 0x5e, 0xd4, 0x00, 0x3f, 0x68, 0x20, 0x7e, 0x84, 0x00, 0x40, 0x9d, - 0x8d, 0xda, 0x6b, 0xbd, 0x87, 0x38, 0x16, 0xca, 0x79, 0x7d, 0x78, 0x12, 0x0b, 0x8d, 0xda, 0x79, - 0x40, 0x08, 0x9d, 0x78, 0x68, 0x02, 0x80, 0x05, 0xc2, 0xd7, 0x22, 0xda, 0x6b, 0x7e, 0xc0, 0x03, - 0x7e, 0xd0, 0x00, 0x7a, 0xd3, 0x90, 0x00, 0x74, 0xaa, 0x39, 0xb5, 0x55, 0x55, 0x74, 0x55, 0x39, - 0xb5, 0x2a, 0xaa, 0x74, 0xa0, 0x39, 0xb5, 0x55, 0x55, 0x7e, 0x04, 0x00, 0x40, 0x9d, 0x70, 0x50, - 0x06, 0x2d, 0x70, 0x7d, 0x07, 0x6d, 0x77, 0x7c, 0x31, 0x7e, 0x7b, 0x00, 0x7a, 0x6b, 0x00, 0x0b, - 0x7c, 0x0b, 0x6c, 0xa5, 0xd9, 0xf3, 0x7f, 0x16, 0x1b, 0x1c, 0x7e, 0x54, 0x27, 0x10, 0x7e, 0x1b, - 0x10, 0xbc, 0x10, 0x68, 0x06, 0x1b, 0x54, 0x78, 0xf5, 0x80, 0x2f, 0x6d, 0x00, 0x7c, 0x20, 0x7f, - 0x16, 0x9f, 0x10, 0x7f, 0x27, 0x9f, 0x20, 0x7e, 0x2b, 0x00, 0x7e, 0x1b, 0x10, 0xbc, 0x01, 0x78, - 0x19, 0x0b, 0x2c, 0x0b, 0x1c, 0xa5, 0xdb, 0xef, 0x7c, 0xb6, 0x20, 0xe0, 0x06, 0x6c, 0xdc, 0x7a, - 0xd3, 0x90, 0x00, 0x4d, 0x77, 0x78, 0x90, 0xc2, 0xd7, 0x22, 0xd2, 0xd7, 0x22, 0x00, 0x04, 0x00, - 0x04, 0x00, 0x00, 0x06, 0x04, 0x02, 0x04, 0x00, 0x02, 0x01, 0x04, 0x01, 0x02, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x02, 0x02, 0x04, 0x00, 0x08, 0x10, 0x02, 0x10, - 0x04, 0x02, 0x08, 0x00, 0x01, 0x01, 0x08, 0x7e, 0x18, 0x7f, 0xbd, 0x7a, 0x1c, 0x00, 0xff, 0x0b, - 0x1a, 0x00, 0x5e, 0x10, 0x1f, 0xbe, 0x10, 0x14, 0x38, 0x1a, 0x0a, 0x51, 0x23, 0x7e, 0x18, 0x0c, - 0x0d, 0x7a, 0x1c, 0x00, 0xff, 0x2d, 0x35, 0x0b, 0x1a, 0x50, 0x60, 0x08, 0xa5, 0xb8, 0x02, 0x03, - 0x4e, 0xa0, 0x08, 0x22, 0x80, 0xfe, 0x7e, 0xe8, 0x7f, 0xbf, 0x7a, 0xec, 0x00, 0xff, 0xe0, 0xf5, - 0x23, 0x54, 0xc0, 0x68, 0x38, 0x7e, 0xe8, 0x7f, 0xbe, 0x7a, 0xec, 0x00, 0xff, 0xe0, 0x60, 0x2e, - 0x12, 0x0c, 0x37, 0xf5, 0x21, 0x7a, 0xa1, 0x20, 0x20, 0x09, 0x0c, 0x20, 0x0a, 0x12, 0x7e, 0xb0, - 0x0e, 0x7a, 0xb3, 0x92, 0x00, 0x80, 0x10, 0x7e, 0xb0, 0x02, 0x7a, 0xb3, 0x92, 0x00, 0x80, 0x07, - 0x7e, 0xb0, 0x0a, 0x7a, 0xb3, 0x92, 0x00, 0x7a, 0xb1, 0x0d, 0x02, 0x0c, 0xc4, 0x22, 0x7e, 0xb0, - 0x02, 0x7a, 0xb3, 0x90, 0x00, 0x12, 0x19, 0x0c, 0x7e, 0xb0, 0x03, 0x7a, 0xb3, 0x90, 0x00, 0x12, - 0x19, 0x0c, 0x80, 0xea, 0xc2, 0xaf, 0xc2, 0x11, 0xc2, 0x12, 0x75, 0xb0, 0xdf, 0x7e, 0x00, 0x01, - 0x7a, 0x03, 0x93, 0x00, 0x7e, 0x00, 0x00, 0x7a, 0x03, 0x90, 0x00, 0x6c, 0x00, 0x7e, 0x10, 0x03, - 0x12, 0x0c, 0xf5, 0x7e, 0x68, 0x2c, 0x66, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x0b, 0x00, - 0x80, 0x32, 0x02, 0x1a, 0x6e, 0x20, 0x11, 0x2b, 0x7e, 0xb0, 0x01, 0x7a, 0xb3, 0x90, 0x00, 0x12, - 0x19, 0x0c, 0x7e, 0xb0, 0x03, 0x7a, 0xb3, 0x90, 0x00, 0x12, 0x19, 0x0c, 0x7e, 0xb0, 0x02, 0x7a, - 0xb3, 0x90, 0x00, 0x12, 0x19, 0x0c, 0xa5, 0xd9, 0xdc, 0x7e, 0xb0, 0x00, 0x7a, 0xb3, 0x90, 0x00, - 0x12, 0x19, 0x0c, 0x22, 0x7e, 0x68, 0x2c, 0xf9, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, - 0xe4, 0x10, 0x00, 0x7e, 0x40, 0x55, 0x7a, 0xe9, 0x40, 0x0b, 0xe4, 0x7e, 0x50, 0xaa, 0x7a, 0xe9, - 0x50, 0x1b, 0xe4, 0xbe, 0xe9, 0x40, 0x68, 0x19, 0x7e, 0x68, 0x2c, 0xdf, 0x7a, 0x6c, 0x00, 0xff, - 0x12, 0x19, 0xc4, 0x12, 0x19, 0x19, 0x30, 0x11, 0x13, 0x7a, 0xe9, 0x40, 0x7e, 0xe9, 0x10, 0x80, - 0xf8, 0x7e, 0x68, 0x2c, 0xda, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x0b, 0x00, 0x7e, 0x68, - 0x2d, 0x3d, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, 0x78, 0x00, 0x00, 0x7e, 0x70, 0x0e, - 0x7e, 0xa4, 0xff, 0xff, 0x7e, 0xb4, 0xbf, 0xff, 0x7d, 0xcb, 0x0e, 0xc4, 0x7d, 0xdc, 0x5d, 0xdb, - 0x6c, 0xbb, 0x7d, 0xfa, 0x5e, 0xf4, 0x7f, 0xff, 0x7a, 0x7b, 0xb0, 0x0b, 0xb0, 0x7d, 0xfb, 0x5e, - 0xf4, 0x7f, 0xff, 0x7a, 0x7b, 0xb0, 0x0b, 0xb0, 0x7d, 0xfc, 0x5e, 0xf4, 0x7f, 0xff, 0x7a, 0x7b, - 0xb0, 0x0b, 0xb0, 0x7d, 0xfd, 0x5e, 0xf4, 0x7f, 0xff, 0x7a, 0x7b, 0xb0, 0x6c, 0xbb, 0x7d, 0xfa, - 0x5e, 0xf4, 0x7f, 0xff, 0xbe, 0x7b, 0xb0, 0x78, 0x41, 0x0b, 0xb0, 0x7d, 0xfb, 0x5e, 0xf4, 0x7f, - 0xff, 0xbe, 0x7b, 0xb0, 0x78, 0x34, 0x0b, 0xb0, 0x7d, 0xfc, 0x5e, 0xf4, 0x7f, 0xff, 0xbe, 0x7b, - 0xb0, 0x78, 0x27, 0x0b, 0xb0, 0x7d, 0xfd, 0x5e, 0xf4, 0x7f, 0xff, 0xbe, 0x7b, 0xb0, 0x78, 0x1a, - 0x0b, 0xb0, 0xbe, 0xc4, 0xff, 0xfe, 0x78, 0x92, 0x0e, 0xb4, 0xa5, 0xdf, 0x8b, 0x7e, 0x68, 0x2c, - 0xe7, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x80, 0x77, 0xca, 0x5b, 0xca, 0x6b, 0x7e, 0x68, - 0x2c, 0xf0, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, 0x68, 0x2d, 0x8f, 0x7a, 0x6c, 0x00, - 0xff, 0x12, 0x19, 0xc4, 0x0a, 0x47, 0x12, 0x19, 0xfa, 0x7e, 0x68, 0x2d, 0xde, 0x7a, 0x6c, 0x00, - 0xff, 0x12, 0x19, 0xc4, 0x6c, 0x77, 0xda, 0x6b, 0xca, 0x6b, 0x0b, 0x70, 0x0e, 0xc4, 0xbe, 0xc4, - 0xff, 0xff, 0x78, 0xf6, 0x1b, 0x70, 0x0a, 0x47, 0x12, 0x19, 0xfa, 0x12, 0x19, 0x19, 0x30, 0x11, - 0x30, 0xda, 0x6b, 0xda, 0x5b, 0x6c, 0xbb, 0x7e, 0x78, 0x00, 0x00, 0x7d, 0xfa, 0x5e, 0xf4, 0x7f, - 0xff, 0x7a, 0x7b, 0xb0, 0x7d, 0xfb, 0x5e, 0xf4, 0x7f, 0xff, 0x7a, 0x7b, 0xb0, 0x7d, 0xfc, 0x5e, - 0xf4, 0x7f, 0xff, 0x7a, 0x7b, 0xb0, 0x7d, 0xfd, 0x5e, 0xf4, 0x7f, 0xff, 0x7a, 0x7b, 0xb0, 0x80, - 0xd4, 0x7e, 0x68, 0x2d, 0x1b, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x30, 0x1f, 0x0e, 0x7e, - 0x78, 0x04, 0x20, 0x7a, 0x7c, 0x00, 0x00, 0x7e, 0x44, 0x7b, 0xe0, 0x80, 0x0c, 0x7e, 0x78, 0x00, - 0x00, 0x7a, 0x7c, 0x00, 0x01, 0x7e, 0x44, 0x80, 0x00, 0x0b, 0x00, 0x7e, 0x40, 0x3a, 0x7c, 0x54, - 0x7f, 0x57, 0x7d, 0x84, 0x6c, 0x66, 0x7a, 0x5b, 0x50, 0x0b, 0x5c, 0x0b, 0x50, 0xa5, 0xde, 0x02, - 0x0b, 0x50, 0x1b, 0x84, 0x78, 0xf0, 0x7c, 0x54, 0x7f, 0x57, 0x7d, 0x84, 0x6c, 0x66, 0xbe, 0x5b, - 0x50, 0x78, 0x1a, 0x0b, 0x5c, 0x0b, 0x50, 0xa5, 0xde, 0x02, 0x0b, 0x50, 0x1b, 0x84, 0x78, 0xee, - 0x7e, 0x68, 0x2c, 0xda, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x80, 0x4b, 0x7f, 0x45, 0x7e, - 0x68, 0x2c, 0xdf, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, 0x68, 0x2d, 0x5f, 0x7a, 0x6c, - 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7d, 0x4b, 0x12, 0x19, 0xfa, 0x7e, 0x68, 0x2d, 0x74, 0x7a, 0x6c, - 0x00, 0xff, 0x12, 0x19, 0xc4, 0x6c, 0x88, 0x7c, 0x95, 0x12, 0x19, 0xfa, 0x7e, 0x68, 0x2d, 0x82, - 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, 0x4b, 0x90, 0x12, 0x19, 0xfa, 0x12, 0x19, 0x19, - 0x30, 0x11, 0x05, 0x7e, 0x4b, 0x90, 0x80, 0xfb, 0x7e, 0x68, 0x2e, 0x28, 0x7a, 0x6c, 0x00, 0xff, - 0x12, 0x19, 0xc4, 0x0b, 0x00, 0x7e, 0xb0, 0x80, 0x7a, 0xb3, 0x91, 0x00, 0x7e, 0xa0, 0x55, 0x7a, - 0xa3, 0x91, 0x10, 0x7e, 0xb3, 0x91, 0x07, 0x7e, 0xb3, 0x91, 0x10, 0xbc, 0xab, 0x78, 0x20, 0x7e, - 0xa0, 0xaa, 0x7a, 0xa3, 0x91, 0x10, 0x7e, 0xb3, 0x91, 0x07, 0x7e, 0xb3, 0x91, 0x10, 0xbc, 0xab, - 0x78, 0x0d, 0x7e, 0x68, 0x2c, 0xda, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x80, 0x1b, 0x7e, - 0x68, 0x2c, 0xdf, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, 0x19, 0x19, 0x30, 0x11, 0x0a, - 0x7a, 0xa3, 0x91, 0x10, 0x7e, 0xb3, 0x91, 0x10, 0x80, 0xf6, 0x7e, 0x68, 0x2e, 0x4a, 0x7a, 0x6c, - 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, 0x12, 0x31, 0x0b, 0x00, 0x7e, 0xe4, 0x10, 0x00, 0x7e, 0xa0, - 0xa5, 0xca, 0xa8, 0x7a, 0xe9, 0xa0, 0x7e, 0xb0, 0x30, 0x7a, 0xb3, 0x95, 0x00, 0x7e, 0xe9, 0xa0, - 0x7e, 0xb0, 0x00, 0x7a, 0xb3, 0x95, 0x00, 0x12, 0x19, 0x0c, 0x0b, 0xe5, 0x7e, 0xb0, 0x20, 0x7a, - 0xb3, 0x95, 0x00, 0x7e, 0xe9, 0xb0, 0x7e, 0xb0, 0x00, 0x7a, 0xb3, 0x95, 0x00, 0x7e, 0xe9, 0xb0, - 0xda, 0xa8, 0xbc, 0xab, 0x78, 0x0d, 0x7e, 0x68, 0x2c, 0xda, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, - 0xc4, 0x80, 0x1d, 0x7e, 0x68, 0x2c, 0xdf, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, 0x19, - 0x19, 0x30, 0x11, 0x0c, 0x7e, 0xb0, 0x38, 0x7a, 0xb3, 0x95, 0x00, 0x7e, 0xe9, 0xb0, 0x80, 0xfb, - 0x80, 0x00, 0x7e, 0x68, 0x2d, 0xe4, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x0b, 0x00, 0x75, - 0xb0, 0xdf, 0x7e, 0x24, 0x80, 0x00, 0x09, 0xb2, 0x00, 0x08, 0xbe, 0xb0, 0x01, 0x78, 0x0b, 0x09, - 0xb2, 0x00, 0x14, 0xbe, 0xb0, 0x60, 0x78, 0x02, 0x80, 0x17, 0x7e, 0x68, 0x2c, 0xdf, 0x7a, 0x6c, - 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, 0x19, 0x19, 0x30, 0x11, 0x11, 0x09, 0xb2, 0x00, 0x08, 0x80, - 0xfa, 0x7e, 0x68, 0x2c, 0xda, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, 0x68, 0x2e, 0x06, - 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x0b, 0x00, 0x75, 0xb0, 0xef, 0x12, 0x18, 0xff, 0x7e, - 0x24, 0x80, 0x00, 0x7e, 0xa0, 0x55, 0x19, 0xa2, 0x00, 0x1c, 0x7e, 0xb0, 0x01, 0x19, 0xb2, 0x00, - 0x08, 0x09, 0xb2, 0x00, 0x1c, 0xbc, 0xab, 0x78, 0x37, 0x09, 0xb2, 0x00, 0x08, 0x5e, 0xb0, 0xc0, - 0xbe, 0xb0, 0xc0, 0x78, 0x2b, 0x7e, 0xa0, 0xaa, 0x19, 0xa2, 0x00, 0x1c, 0x6c, 0xbb, 0x19, 0xb2, - 0x00, 0x08, 0x09, 0xb2, 0x00, 0x1c, 0xbc, 0xab, 0x78, 0x16, 0x09, 0xb2, 0x00, 0x08, 0x5e, 0xb0, - 0xc0, 0x78, 0x0d, 0x7e, 0x68, 0x2c, 0xda, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x80, 0x1b, - 0x7e, 0x68, 0x2c, 0xdf, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, 0x19, 0x19, 0x30, 0x11, - 0x0a, 0x19, 0xa2, 0x00, 0x1c, 0x09, 0xb2, 0x00, 0x1c, 0x80, 0xf6, 0x7e, 0x68, 0x2e, 0x6c, 0x7a, - 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, 0x68, 0x2e, 0xee, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, - 0xc4, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, 0x7e, 0xb0, 0x01, 0x19, 0xb2, 0x00, 0x1c, 0x2e, - 0x24, 0x01, 0x00, 0x0b, 0xb0, 0xa5, 0xd9, 0xf3, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, 0x7e, - 0xb0, 0x01, 0x0b, 0x00, 0x09, 0xa2, 0x00, 0x1c, 0xbc, 0xab, 0x78, 0x16, 0x7e, 0x68, 0x2c, 0xe7, - 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x2e, 0x24, 0x01, 0x00, 0x0b, 0xb0, 0xa5, 0xd9, 0xe2, - 0x80, 0x25, 0x7e, 0x68, 0x2c, 0xf0, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, 0x19, 0x19, - 0x30, 0x11, 0xe4, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, 0x09, 0xa2, 0x00, 0x1c, 0x2e, 0x24, - 0x01, 0x00, 0xa5, 0xd9, 0xf5, 0x80, 0xec, 0x7e, 0x68, 0x2f, 0x12, 0x7a, 0x6c, 0x00, 0xff, 0x12, - 0x19, 0xc4, 0x12, 0x12, 0x31, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, 0x0b, 0x00, 0x74, 0x10, - 0x19, 0xb2, 0x00, 0x10, 0x12, 0x11, 0xaa, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xee, 0x7e, 0x68, - 0x2f, 0x36, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, - 0x0b, 0x00, 0xe4, 0x19, 0xb2, 0x00, 0x10, 0x12, 0x11, 0xaa, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, - 0xef, 0x30, 0x00, 0x03, 0x02, 0x17, 0x3b, 0x02, 0x12, 0x6a, 0x74, 0x07, 0x19, 0xb2, 0x00, 0x08, - 0x12, 0x19, 0x0c, 0x09, 0xb2, 0x00, 0x00, 0x09, 0xb2, 0x00, 0x14, 0x09, 0xb2, 0x00, 0x00, 0x09, - 0xb2, 0x00, 0x14, 0x09, 0xb2, 0x00, 0x00, 0x09, 0xb2, 0x00, 0x14, 0x09, 0xb2, 0x00, 0x00, 0x09, - 0xb2, 0x00, 0x14, 0xc2, 0x13, 0x7e, 0xb0, 0x55, 0x12, 0x12, 0x0b, 0x7e, 0xb0, 0xaa, 0x12, 0x12, - 0x0b, 0x7e, 0xb0, 0x00, 0x12, 0x12, 0x0b, 0x7e, 0xb0, 0xff, 0x12, 0x12, 0x0b, 0x30, 0x13, 0x0f, - 0x7e, 0x68, 0x2c, 0xf0, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, 0x19, 0x19, 0x22, 0x7e, - 0x68, 0x2c, 0xe7, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x22, 0x19, 0xb2, 0x00, 0x00, 0x12, - 0x18, 0xff, 0x09, 0xa2, 0x00, 0x00, 0xbc, 0xab, 0x78, 0x01, 0x22, 0x20, 0x11, 0x03, 0xd2, 0x13, - 0x22, 0x12, 0x19, 0x19, 0x19, 0xb2, 0x00, 0x00, 0x12, 0x18, 0xff, 0x09, 0xa2, 0x00, 0x00, 0x80, - 0xf3, 0x75, 0xb0, 0xdf, 0x12, 0x18, 0xff, 0x75, 0xb0, 0xef, 0x12, 0x18, 0xff, 0x7e, 0x24, 0x80, - 0x00, 0x7e, 0x11, 0x21, 0x74, 0x80, 0x19, 0xb2, 0x00, 0x0c, 0x7e, 0x54, 0x00, 0x02, 0x19, 0xa2, - 0x00, 0x04, 0x19, 0xb2, 0x00, 0x00, 0x74, 0x03, 0x19, 0xb2, 0x00, 0x0c, 0x74, 0x06, 0x19, 0xb2, - 0x00, 0x08, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xdb, 0x22, 0x7e, 0x68, 0x2f, 0x5a, 0x7a, 0x6c, - 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, 0x0b, 0x00, 0x12, 0x18, - 0xff, 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x55, 0x19, 0xa2, 0x00, 0x00, 0x12, 0x18, 0xff, 0x09, - 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x05, 0x78, 0x0d, 0x7e, 0x68, 0x2c, 0xe7, 0x7a, 0x6c, 0x00, 0xff, - 0x12, 0x19, 0xc4, 0x80, 0x1a, 0x7e, 0x68, 0x2c, 0xf0, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, - 0x12, 0x19, 0x19, 0x30, 0x11, 0x09, 0x19, 0xa2, 0x00, 0x00, 0x12, 0x18, 0xff, 0x80, 0xf7, 0x2e, - 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xb6, 0x7e, 0x68, 0x2f, 0x7e, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, - 0xc4, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, 0x0b, 0x00, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, - 0x18, 0x7e, 0xa0, 0x55, 0x19, 0xa2, 0x00, 0x00, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x5e, - 0xb0, 0x0a, 0x78, 0x0d, 0x7e, 0x68, 0x2c, 0xe7, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x80, - 0x1a, 0x7e, 0x68, 0x2c, 0xf0, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, 0x19, 0x19, 0x30, - 0x11, 0x09, 0x19, 0xa2, 0x00, 0x00, 0x12, 0x18, 0xff, 0x80, 0xf7, 0x2e, 0x24, 0x01, 0x00, 0xa5, - 0xd9, 0xb6, 0x30, 0x04, 0x03, 0x02, 0x15, 0x9f, 0x7e, 0x68, 0x2f, 0xa2, 0x7a, 0x6c, 0x00, 0xff, - 0x12, 0x19, 0xc4, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, 0x0b, 0x00, 0x6c, 0xaa, 0x19, 0xa2, - 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, - 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x0a, - 0x78, 0x3c, 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, - 0x7e, 0xa0, 0x03, 0x19, 0xa2, 0x00, 0x10, 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, - 0xff, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x0a, 0x78, 0x14, 0x7e, 0x68, 0x2c, 0xe7, 0x7a, 0x6c, - 0x00, 0xff, 0x12, 0x19, 0xc4, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0x9e, 0x80, 0x20, 0x7e, 0x68, - 0x2c, 0xf0, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, 0x19, 0x19, 0x30, 0x11, 0xe6, 0x7e, - 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x80, 0xf1, 0x7e, 0x68, - 0x2f, 0xea, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, - 0x0b, 0x00, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x7e, - 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, - 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x05, 0x78, 0x3c, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x12, - 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x03, 0x19, 0xa2, 0x00, 0x10, 0x7e, 0xa0, 0x02, - 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x05, 0x78, 0x14, - 0x7e, 0x68, 0x2c, 0xe7, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x2e, 0x24, 0x01, 0x00, 0xa5, - 0xd9, 0x9e, 0x80, 0x20, 0x7e, 0x68, 0x2c, 0xf0, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, - 0x19, 0x19, 0x30, 0x11, 0xe6, 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, - 0x00, 0x10, 0x80, 0xf1, 0x7e, 0x68, 0x30, 0x32, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, - 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, 0x0b, 0x00, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x12, - 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x50, 0xbe, 0xb0, 0x50, 0x78, 0x1f, 0x6c, 0xaa, - 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x50, 0x78, 0x0d, - 0x7e, 0x68, 0x2c, 0xe7, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x80, 0x20, 0x7e, 0x68, 0x2c, - 0xf0, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, 0x19, 0x19, 0x30, 0x11, 0x0f, 0x7e, 0xa0, - 0x02, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x80, 0xf1, 0x2e, 0x24, 0x01, - 0x00, 0xa5, 0xd9, 0xa2, 0x7e, 0x68, 0x30, 0x7a, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, - 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, 0x0b, 0x00, 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x01, 0x19, - 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0xa0, 0xbe, 0xb0, 0xa0, - 0x78, 0x1f, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x5e, - 0xb0, 0xa0, 0x78, 0x0d, 0x7e, 0x68, 0x2c, 0xe7, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x80, - 0x20, 0x7e, 0x68, 0x2c, 0xf0, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, 0x19, 0x19, 0x30, - 0x11, 0x0f, 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x80, - 0xf1, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0x9e, 0x7e, 0x68, 0x30, 0x9e, 0x7a, 0x6c, 0x00, 0xff, - 0x12, 0x19, 0xc4, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, 0x0b, 0x00, 0x20, 0xb1, 0x26, 0x7e, - 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x30, 0xb1, 0x19, 0x6c, 0xaa, 0x19, 0xa2, - 0x00, 0x10, 0x12, 0x18, 0xff, 0x20, 0xb1, 0x0d, 0x7e, 0x68, 0x2c, 0xe7, 0x7a, 0x6c, 0x00, 0xff, - 0x12, 0x19, 0xc4, 0x80, 0x20, 0x7e, 0x68, 0x2c, 0xf0, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, - 0x12, 0x19, 0x19, 0x30, 0x11, 0x0f, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, - 0xa2, 0x00, 0x10, 0x80, 0xf1, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xae, 0x02, 0x17, 0x3b, 0x7e, - 0x68, 0x2f, 0xc6, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, - 0x21, 0x0b, 0x00, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, - 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, - 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x06, 0x78, 0x3c, 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, - 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x03, 0x19, 0xa2, 0x00, 0x10, 0x7e, 0xa0, - 0x01, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x06, 0x78, - 0x14, 0x7e, 0x68, 0x2c, 0xe7, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x2e, 0x24, 0x01, 0x00, - 0xa5, 0xd9, 0x9e, 0x80, 0x20, 0x7e, 0x68, 0x2c, 0xf0, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, - 0x12, 0x19, 0x19, 0x30, 0x11, 0xe6, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, - 0xa2, 0x00, 0x10, 0x80, 0xf1, 0x7e, 0x68, 0x30, 0x0e, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, - 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, 0x0b, 0x00, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, - 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x01, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, - 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x09, 0x78, 0x3c, 0x7e, - 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x7e, 0xa0, 0x03, - 0x19, 0xa2, 0x00, 0x10, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, - 0x00, 0x18, 0x5e, 0xb0, 0x09, 0x78, 0x14, 0x7e, 0x68, 0x2c, 0xe7, 0x7a, 0x6c, 0x00, 0xff, 0x12, - 0x19, 0xc4, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0x9e, 0x80, 0x20, 0x7e, 0x68, 0x2c, 0xf0, 0x7a, - 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, 0x19, 0x19, 0x30, 0x11, 0xe6, 0x7e, 0xa0, 0x01, 0x19, - 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x80, 0xf1, 0x7e, 0x68, 0x30, 0x56, 0x7a, - 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, 0x0b, 0x00, 0x7e, - 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, 0x00, 0x18, 0x5e, 0xb0, 0x90, - 0xbe, 0xb0, 0x90, 0x78, 0x1f, 0x6c, 0xaa, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x09, 0xb2, - 0x00, 0x18, 0x5e, 0xb0, 0x90, 0x78, 0x0d, 0x7e, 0x68, 0x2c, 0xe7, 0x7a, 0x6c, 0x00, 0xff, 0x12, - 0x19, 0xc4, 0x80, 0x20, 0x7e, 0x68, 0x2c, 0xf0, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x12, - 0x19, 0x19, 0x30, 0x11, 0x0f, 0x7e, 0xa0, 0x02, 0x19, 0xa2, 0x00, 0x10, 0x6c, 0xaa, 0x19, 0xa2, - 0x00, 0x10, 0x80, 0xf1, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xa2, 0x20, 0x1f, 0x68, 0x12, 0x12, - 0x31, 0x12, 0x17, 0xa9, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, 0x0b, 0x00, 0x20, 0x89, 0x26, - 0x7e, 0xa0, 0xff, 0x19, 0xa2, 0x00, 0x04, 0x12, 0x18, 0xff, 0x7e, 0xb0, 0x55, 0x19, 0xb2, 0x00, - 0x00, 0x12, 0x18, 0xff, 0x30, 0x89, 0x0f, 0x7e, 0xa0, 0x00, 0x19, 0xa2, 0x00, 0x04, 0x12, 0x18, - 0xff, 0x20, 0x89, 0x02, 0x80, 0x26, 0x12, 0x19, 0x19, 0x30, 0x11, 0x20, 0x7e, 0xa0, 0xff, 0x19, - 0xa2, 0x00, 0x04, 0x12, 0x18, 0xff, 0x7e, 0xb0, 0x55, 0x19, 0xb2, 0x00, 0x00, 0x12, 0x18, 0xff, - 0x7e, 0xa0, 0x00, 0x19, 0xa2, 0x00, 0x04, 0x12, 0x18, 0xff, 0x80, 0xe0, 0x2e, 0x24, 0x01, 0x00, - 0xa5, 0xd9, 0xa8, 0x02, 0x17, 0xc2, 0x02, 0x18, 0x4c, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x21, - 0x7e, 0xa0, 0x08, 0x19, 0xa2, 0x00, 0x10, 0x12, 0x18, 0xff, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, - 0xef, 0x22, 0x30, 0x1f, 0x03, 0x02, 0x18, 0x4c, 0xc2, 0x8a, 0x12, 0x17, 0xa9, 0x0b, 0x00, 0x12, - 0x18, 0x16, 0x20, 0x8b, 0x24, 0x74, 0x03, 0x7a, 0xb3, 0x91, 0x06, 0x74, 0x02, 0x7a, 0xb3, 0x91, - 0x07, 0x74, 0x0c, 0x7a, 0xb3, 0x91, 0x06, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x07, 0x12, 0x19, 0x0c, - 0x30, 0x8b, 0x06, 0x12, 0x18, 0x16, 0x30, 0x8b, 0xad, 0x12, 0x19, 0x19, 0x30, 0x11, 0xa7, 0x12, - 0x18, 0x16, 0x74, 0x03, 0x7a, 0xb3, 0x91, 0x06, 0x74, 0x02, 0x7a, 0xb3, 0x91, 0x07, 0x12, 0x19, - 0x0c, 0x12, 0x18, 0x16, 0x80, 0xe9, 0x7e, 0xa0, 0x00, 0x74, 0x02, 0x7a, 0xb3, 0x91, 0x06, 0x7a, - 0xa3, 0x91, 0x07, 0x74, 0x03, 0x7a, 0xb3, 0x91, 0x06, 0x7a, 0xa3, 0x91, 0x07, 0x12, 0x18, 0xff, - 0x74, 0xef, 0x7a, 0xb3, 0x91, 0x04, 0x74, 0x80, 0x7a, 0xb3, 0x91, 0x03, 0x74, 0x0c, 0x7a, 0xb3, - 0x91, 0x06, 0x74, 0x08, 0x7a, 0xb3, 0x91, 0x07, 0x12, 0x19, 0x0c, 0x22, 0x30, 0x12, 0x19, 0x7e, - 0x68, 0x30, 0xc2, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0xd2, 0x11, 0x12, 0x18, 0xff, 0x12, - 0x18, 0xff, 0x12, 0x18, 0xff, 0x02, 0x0c, 0xca, 0x30, 0x1f, 0x1c, 0x7e, 0x68, 0x31, 0x3c, 0x7a, - 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x7e, 0x68, 0x31, 0x5e, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, - 0xc4, 0x12, 0x1a, 0x6e, 0x02, 0x18, 0xf7, 0x0b, 0x00, 0x7e, 0x78, 0x18, 0xb1, 0x7a, 0x7c, 0x00, - 0xff, 0x7f, 0x67, 0x7a, 0x6c, 0x00, 0x00, 0x7e, 0x70, 0x3e, 0x7e, 0x7b, 0xb0, 0x7a, 0x6b, 0xb0, - 0x0b, 0x7c, 0x0b, 0x6c, 0xa5, 0xdf, 0xf3, 0x7e, 0x78, 0x18, 0xb1, 0x7a, 0x7c, 0x00, 0x00, 0x89, - 0x78, 0x7e, 0x78, 0x00, 0x00, 0x7a, 0x7c, 0x00, 0xfe, 0x7e, 0x68, 0x7f, 0xbf, 0x7a, 0x6c, 0x00, - 0xfe, 0x74, 0xaa, 0x39, 0xb7, 0x55, 0x55, 0x74, 0x55, 0x39, 0xb7, 0x2a, 0xaa, 0x74, 0xa0, 0x39, - 0xb7, 0x55, 0x55, 0x6c, 0x99, 0x7a, 0x6b, 0x90, 0x7e, 0x54, 0x27, 0x10, 0x7e, 0x6b, 0x80, 0xbc, - 0x89, 0x68, 0x08, 0x1b, 0x54, 0x78, 0xf5, 0x8a, 0xff, 0x18, 0xef, 0x8a, 0xff, 0x18, 0xf7, 0x12, - 0x19, 0x19, 0x7e, 0x6b, 0x80, 0x80, 0xfb, 0x7e, 0x10, 0xff, 0x12, 0x19, 0xac, 0x80, 0xf8, 0xca, - 0xf9, 0x7e, 0xf4, 0x00, 0xff, 0x1b, 0xf4, 0x78, 0xfc, 0xda, 0xf9, 0x22, 0xca, 0xf9, 0x7e, 0xf4, - 0x00, 0x00, 0x1b, 0xf4, 0x78, 0xfc, 0xda, 0xf9, 0x22, 0x20, 0x11, 0x20, 0xd2, 0x12, 0x12, 0x19, - 0x0c, 0x7e, 0xb0, 0x02, 0x7a, 0xb3, 0x90, 0x00, 0x12, 0x19, 0x0c, 0x12, 0x19, 0x0c, 0x12, 0x19, - 0x0c, 0x12, 0x19, 0x0c, 0x7e, 0xb0, 0x00, 0x7a, 0xb3, 0x90, 0x00, 0x22, 0xca, 0x0b, 0x7e, 0x10, - 0x03, 0x7c, 0x30, 0x6c, 0x22, 0x0b, 0x20, 0x9e, 0x30, 0x0a, 0x50, 0xf9, 0x2e, 0x30, 0x0b, 0x1b, - 0x20, 0x68, 0x20, 0x12, 0x19, 0x0c, 0x12, 0x19, 0x0c, 0x7e, 0xb0, 0x03, 0x7a, 0xb3, 0x90, 0x00, - 0x12, 0x19, 0x0c, 0x12, 0x19, 0x0c, 0x12, 0x19, 0x0c, 0x7e, 0xb0, 0x00, 0x7a, 0xb3, 0x90, 0x00, - 0xa5, 0xda, 0xe0, 0x12, 0x19, 0x0c, 0x12, 0x19, 0x0c, 0x1b, 0x30, 0x68, 0x20, 0x12, 0x19, 0x0c, - 0x12, 0x19, 0x0c, 0x7e, 0xb0, 0x02, 0x7a, 0xb3, 0x90, 0x00, 0x12, 0x19, 0x0c, 0x12, 0x19, 0x0c, - 0x12, 0x19, 0x0c, 0x7e, 0xb0, 0x00, 0x7a, 0xb3, 0x90, 0x00, 0xa5, 0xdb, 0xe0, 0x7e, 0x20, 0x0a, - 0x12, 0x19, 0x0c, 0xa5, 0xda, 0xfa, 0xa5, 0xd9, 0x98, 0xda, 0x0b, 0x22, 0x20, 0x11, 0x14, 0x12, - 0x19, 0x0c, 0x7e, 0xb0, 0x01, 0x7a, 0xb3, 0x90, 0x00, 0x12, 0x19, 0x0c, 0x7e, 0xb0, 0x00, 0x7a, - 0xb3, 0x90, 0x00, 0x22, 0x30, 0x1f, 0x32, 0x20, 0x11, 0x2f, 0xca, 0x2b, 0xca, 0x7b, 0x7e, 0x78, - 0x80, 0x00, 0x7a, 0x7c, 0x00, 0xfe, 0x12, 0x1a, 0x4d, 0x7e, 0x6b, 0xa0, 0x5c, 0xaa, 0x68, 0x10, - 0x29, 0xb7, 0x00, 0x14, 0x54, 0x60, 0x68, 0xf8, 0x39, 0xa7, 0x00, 0x00, 0x0b, 0x6c, 0x80, 0xe9, - 0x12, 0x18, 0xff, 0xd2, 0xb5, 0xda, 0x7b, 0xda, 0x2b, 0x22, 0x12, 0x1a, 0x05, 0x7e, 0x68, 0x00, - 0x0c, 0x12, 0x19, 0xc4, 0x22, 0xca, 0x59, 0xca, 0x5b, 0x7e, 0xb4, 0x00, 0x0c, 0x7c, 0xb8, 0xc4, - 0x12, 0x1a, 0x35, 0x7c, 0xb8, 0x12, 0x1a, 0x35, 0x7c, 0xb9, 0xc4, 0x12, 0x1a, 0x35, 0x7c, 0xb9, - 0x12, 0x1a, 0x35, 0x7e, 0xb0, 0x68, 0x7a, 0xb9, 0xb0, 0x0b, 0xb4, 0x6c, 0xbb, 0x7a, 0xb9, 0xb0, - 0xda, 0x59, 0xda, 0x5b, 0x22, 0x5e, 0xb0, 0x0f, 0x7c, 0xab, 0x9e, 0xa0, 0x0a, 0x40, 0x05, 0x2e, - 0xb0, 0x37, 0x80, 0x03, 0x2e, 0xb0, 0x30, 0x7a, 0xb9, 0xb0, 0x0b, 0xb4, 0x22, 0xc2, 0xb5, 0x75, - 0xb0, 0xef, 0x12, 0x18, 0xff, 0x74, 0x80, 0x39, 0xb7, 0x00, 0x0c, 0x7e, 0x54, 0x00, 0x06, 0x39, - 0xa7, 0x00, 0x04, 0x39, 0xb7, 0x00, 0x00, 0x74, 0x03, 0x39, 0xb7, 0x00, 0x0c, 0x22, 0x7e, 0x78, - 0x00, 0x00, 0x7a, 0x7c, 0x00, 0xff, 0x7e, 0x58, 0x00, 0x00, 0x7a, 0x5c, 0x00, 0x01, 0x7f, 0x65, - 0x7e, 0x74, 0x20, 0x00, 0x12, 0x0b, 0x63, 0x40, 0x58, 0x7e, 0x78, 0x7c, 0x00, 0x7a, 0x7c, 0x00, - 0xff, 0x7e, 0x58, 0x00, 0x00, 0x7a, 0x5c, 0x00, 0x01, 0x7e, 0x68, 0x7c, 0x00, 0x7a, 0x6c, 0x00, - 0x01, 0x7e, 0x74, 0x04, 0x00, 0x12, 0x0b, 0x63, 0x40, 0x37, 0x74, 0x80, 0x12, 0x1a, 0xea, 0x40, - 0x30, 0x7e, 0x00, 0x03, 0x7a, 0x03, 0x90, 0x00, 0xd2, 0x10, 0x7e, 0x04, 0x00, 0x08, 0x7e, 0x14, - 0x00, 0x00, 0x84, 0xa5, 0xdb, 0xfc, 0xa5, 0xda, 0xf9, 0xa5, 0xd9, 0xf6, 0x74, 0x40, 0x12, 0x1a, - 0xea, 0x40, 0x0e, 0x7e, 0x68, 0x31, 0x8d, 0x7a, 0x6c, 0x00, 0xff, 0x12, 0x19, 0xc4, 0x02, 0x18, - 0xf7, 0x7e, 0xb0, 0x02, 0x7a, 0xb3, 0x90, 0x00, 0x80, 0xfe, 0xf5, 0x0b, 0x7e, 0x78, 0x00, 0x0b, - 0x7a, 0x7c, 0x00, 0x00, 0x7e, 0x68, 0x7f, 0xbf, 0x7a, 0x6c, 0x00, 0x01, 0x7e, 0x74, 0x00, 0x01, - 0x02, 0x0b, 0x63, - -// Segment #19, EXCLUDED Start Address 00ff2c66, Length 1393 - -}; - -static const struct edge_firmware_version_info IMAGE_VERSION_NAME = { - 2, 0, 3 }; // Major, Minor, Build - -#undef IMAGE_VERSION_NAME - -#undef IMAGE_ARRAY_NAME - diff --git a/drivers/usb/serial/io_fw_down.h b/drivers/usb/serial/io_fw_down.h deleted file mode 100644 index 5a61d809a46e..000000000000 --- a/drivers/usb/serial/io_fw_down.h +++ /dev/null @@ -1,1229 +0,0 @@ -//************************************************************** -//* Edgeport/4 Binary Image -//* Generated by HEX2C v1.06 -//* Copyright (C) 1998 Inside Out Networks, All rights reserved. -//* This program is free software; you can redistribute it and/or modify -//* it under the terms of the GNU General Public License as published by -//* the Free Software Foundation; either version 2 of the License, or -//* (at your option) any later version. -//************************************************************** - - -//Image structure definition -#if !defined(DEFINED_EDGE_FIRMWARE_IMAGE_RECORD) - #define DEFINED_EDGE_FIRMWARE_IMAGE_RECORD - struct edge_firmware_image_record { - __le16 ExtAddr; - __le16 Addr; - __le16 Len; - unsigned char Data[0]; - } __attribute__ ((packed)); - - struct edge_firmware_version_info { - unsigned char MajorVersion; - unsigned char MinorVersion; - unsigned short BuildNumber; - }; - -#endif - -#if !defined(IMAGE_ARRAY_NAME) - #define IMAGE_ARRAY_NAME FirmwareImage - #define IMAGE_VERSION_NAME FirmwareImageVersion -#endif - -static unsigned char IMAGE_ARRAY_NAME[] = { - -// Segment #1, Start Address 00ff0000, Length 6 -0xff,0x00,0x00,0x00,0x06,0x00, - 0x02, 0x00, 0x80, 0x02, 0x44, 0xb0, - -// Segment #2, Start Address 00ff000b, Length 3 -0xff,0x00,0x0b,0x00,0x03,0x00, - 0x02, 0x44, 0x72, - -// Segment #3, Start Address 00ff0013, Length 3 -0xff,0x00,0x13,0x00,0x03,0x00, - 0x02, 0x00, 0x13, - -// Segment #4, Start Address 00ff001b, Length 3 -0xff,0x00,0x1b,0x00,0x03,0x00, - 0x02, 0x00, 0x1b, - -// Segment #5, Start Address 00ff0023, Length 3 -0xff,0x00,0x23,0x00,0x03,0x00, - 0x02, 0x00, 0x23, - -// Segment #6, Start Address 00ff002b, Length 3 -0xff,0x00,0x2b,0x00,0x03,0x00, - 0x02, 0x00, 0x2b, - -// Segment #7, Start Address 00ff0033, Length 3 -0xff,0x00,0x33,0x00,0x03,0x00, - 0x02, 0x00, 0x33, - -// Segment #8, Start Address 00ff003b, Length 3 -0xff,0x00,0x3b,0x00,0x03,0x00, - 0x02, 0x00, 0x3b, - -// Segment #9, Start Address 00ff0043, Length 3 -0xff,0x00,0x43,0x00,0x03,0x00, - 0x02, 0x00, 0x43, - -// Segment #10, Start Address 00ff004b, Length 3 -0xff,0x00,0x4b,0x00,0x03,0x00, - 0x02, 0x6e, 0xc4, - -// Segment #11, Start Address 00ff0053, Length 3 -0xff,0x00,0x53,0x00,0x03,0x00, - 0x02, 0x75, 0x8d, - -// Segment #12, Start Address 00ff007b, Length 3 -0xff,0x00,0x7b,0x00,0x03,0x00, - 0x02, 0x00, 0x7b, - -// Segment #13, Start Address 00ff0080, Length 7 -0xff,0x00,0x80,0x00,0x07,0x00, - 0x7e, 0x14, 0x00, 0x00, 0x02, 0x40, 0x51, - -// Segment #14, Start Address 00ff3000, Length 2178 -0xff,0x00,0x00,0x30,0x82,0x08, - 0x12, 0x37, 0x28, 0x12, 0x30, 0x3e, 0x12, 0x30, 0x54, 0x12, 0x30, 0xe5, 0x12, 0x31, 0x68, 0x12, - 0x35, 0x20, 0x12, 0x38, 0x58, 0x12, 0x31, 0x15, 0x12, 0x31, 0x40, 0x12, 0x30, 0xa0, 0x80, 0xe0, - 0xe5, 0x23, 0x60, 0x19, 0x7e, 0x14, 0x00, 0x00, 0x09, 0xb1, 0x01, 0xcf, 0xb4, 0x00, 0x02, 0x80, - 0x05, 0x14, 0x19, 0xb1, 0x01, 0xcf, 0xa5, 0x0b, 0xbe, 0x31, 0x2f, 0x78, 0xeb, 0x22, 0xc2, 0xaf, - 0x7e, 0xb3, 0x3f, 0xf1, 0xb4, 0x01, 0x0a, 0xc0, 0xf1, 0x75, 0xf1, 0x02, 0x12, 0x70, 0xef, 0xd0, - 0xf1, 0xd2, 0xaf, 0x22, 0xc2, 0xaf, 0xe5, 0x22, 0x60, 0x43, 0x7e, 0x07, 0x01, 0xe1, 0xbe, 0x04, - 0x03, 0x80, 0x38, 0x39, 0x7e, 0x04, 0x80, 0x00, 0x7e, 0x20, 0x00, 0x13, 0x50, 0x21, 0x09, 0xa0, - 0x00, 0x04, 0x4e, 0xa0, 0x05, 0x19, 0xa0, 0x00, 0x04, 0x0a, 0x32, 0x09, 0x53, 0x67, 0x8e, 0x5e, - 0x51, 0x27, 0x68, 0x0b, 0x09, 0xa0, 0x00, 0x10, 0x4e, 0xa0, 0x01, 0x19, 0xa0, 0x00, 0x10, 0x2e, - 0x04, 0x01, 0x00, 0xa5, 0x0a, 0xbe, 0x21, 0x2f, 0x78, 0xd1, 0x75, 0x22, 0x00, 0xd2, 0xaf, 0x22, - 0xc2, 0xaf, 0x7e, 0x20, 0x00, 0x7e, 0x30, 0x01, 0x7c, 0xb2, 0x23, 0x0a, 0x2b, 0x49, 0x32, 0x01, - 0x8f, 0xbe, 0x34, 0x00, 0x00, 0x68, 0x12, 0x7e, 0xb1, 0x21, 0xa5, 0x4b, 0x7a, 0xb1, 0x21, 0xca, - 0x19, 0x49, 0x22, 0x30, 0xd5, 0x99, 0x24, 0xda, 0x19, 0x3e, 0x30, 0xa5, 0x0a, 0xbe, 0x21, 0x2f, - 0x78, 0xd6, 0xd2, 0xaf, 0x22, 0x46, 0x0f, 0x49, 0x67, 0x4c, 0xbf, 0x50, 0x17, 0x53, 0x6f, 0x56, - 0xc7, 0x5a, 0x1f, 0x5d, 0x77, 0xc2, 0xaf, 0xe5, 0x32, 0x60, 0x14, 0x7e, 0x20, 0x00, 0x13, 0x50, - 0x07, 0xca, 0xb8, 0x12, 0x31, 0x02, 0xda, 0xb8, 0xa5, 0x0a, 0xbe, 0x21, 0x2f, 0x78, 0xef, 0xd2, - 0xaf, 0x22, 0xca, 0x28, 0x12, 0x67, 0xab, 0xda, 0x28, 0x40, 0x09, 0x0a, 0x22, 0x09, 0xb2, 0x67, - 0x8e, 0xf4, 0x52, 0x32, 0x22, 0xc2, 0xaf, 0xe5, 0x34, 0x60, 0x14, 0x7e, 0x20, 0x00, 0x13, 0x50, - 0x07, 0xca, 0xb8, 0x12, 0x31, 0x32, 0xda, 0xb8, 0xa5, 0x0a, 0xbe, 0x21, 0x2f, 0x78, 0xef, 0xd2, - 0xaf, 0x22, 0xca, 0x28, 0x0a, 0x22, 0x09, 0x42, 0x00, 0x3e, 0x12, 0x69, 0xc2, 0xda, 0x28, 0x22, - 0xc2, 0xaf, 0xe5, 0x35, 0x60, 0x14, 0x7e, 0x20, 0x00, 0x13, 0x50, 0x07, 0xca, 0xb8, 0x12, 0x31, - 0x5d, 0xda, 0xb8, 0xa5, 0x0a, 0xbe, 0x21, 0x2f, 0x78, 0xef, 0xd2, 0xaf, 0x22, 0xca, 0x28, 0x7e, - 0x40, 0x00, 0x12, 0x6c, 0x5b, 0xda, 0x28, 0x22, 0xc2, 0xaf, 0xe5, 0x23, 0x60, 0x14, 0x7e, 0x20, - 0x00, 0x13, 0x50, 0x07, 0xca, 0xb8, 0x12, 0x31, 0x85, 0xda, 0xb8, 0xa5, 0x0a, 0xbe, 0x21, 0x2f, - 0x78, 0xef, 0xd2, 0xaf, 0x22, 0x7c, 0xb2, 0x23, 0x0a, 0x2b, 0x49, 0x22, 0x31, 0x90, 0x89, 0x24, - 0x31, 0xa0, 0x32, 0x10, 0x32, 0x80, 0x32, 0xf0, 0x33, 0x60, 0x33, 0xd0, 0x34, 0x40, 0x34, 0xb0, - 0x7e, 0x27, 0x01, 0x8f, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x24, 0x7e, 0x24, 0x80, 0x00, 0x09, 0xb2, - 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, - 0x49, 0x30, 0x7d, 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, 0x7e, 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, - 0x01, 0x9f, 0x68, 0x0d, 0x7a, 0x27, 0x01, 0x9f, 0x7e, 0x60, 0x9c, 0x7a, 0x63, 0x01, 0xcf, 0x80, - 0x2e, 0x7e, 0x63, 0x01, 0xcf, 0xa5, 0xbe, 0x00, 0x26, 0x7e, 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, - 0xa0, 0xc8, 0x12, 0x62, 0xb6, 0x40, 0x18, 0x75, 0x31, 0xb3, 0x12, 0x7c, 0x15, 0xc2, 0x18, 0x6c, - 0x00, 0x7a, 0x03, 0x01, 0xcf, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, - 0x7e, 0x27, 0x01, 0x91, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x24, 0x7e, 0x24, 0x81, 0x00, 0x09, 0xb2, - 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, - 0x4c, 0x88, 0x7d, 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, 0x7e, 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, - 0x01, 0xa1, 0x68, 0x0d, 0x7a, 0x27, 0x01, 0xa1, 0x7e, 0x60, 0x9c, 0x7a, 0x63, 0x01, 0xd0, 0x80, - 0x2e, 0x7e, 0x63, 0x01, 0xd0, 0xa5, 0xbe, 0x00, 0x26, 0x7e, 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, - 0xa0, 0xc8, 0x12, 0x62, 0xb6, 0x40, 0x18, 0x75, 0x31, 0xb3, 0x12, 0x7c, 0x15, 0xc2, 0x19, 0x6c, - 0x00, 0x7a, 0x03, 0x01, 0xd0, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, - 0x7e, 0x27, 0x01, 0x93, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x24, 0x7e, 0x24, 0x82, 0x00, 0x09, 0xb2, - 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, - 0x4f, 0xe0, 0x7d, 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, 0x7e, 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, - 0x01, 0xa3, 0x68, 0x0d, 0x7a, 0x27, 0x01, 0xa3, 0x7e, 0x60, 0x9c, 0x7a, 0x63, 0x01, 0xd1, 0x80, - 0x2e, 0x7e, 0x63, 0x01, 0xd1, 0xa5, 0xbe, 0x00, 0x26, 0x7e, 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, - 0xa0, 0xc8, 0x12, 0x62, 0xb6, 0x40, 0x18, 0x75, 0x31, 0xb3, 0x12, 0x7c, 0x15, 0xc2, 0x1a, 0x6c, - 0x00, 0x7a, 0x03, 0x01, 0xd1, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, - 0x7e, 0x27, 0x01, 0x95, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x24, 0x7e, 0x24, 0x83, 0x00, 0x09, 0xb2, - 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, - 0x53, 0x38, 0x7d, 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, 0x7e, 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, - 0x01, 0xa5, 0x68, 0x0d, 0x7a, 0x27, 0x01, 0xa5, 0x7e, 0x60, 0x9c, 0x7a, 0x63, 0x01, 0xd2, 0x80, - 0x2e, 0x7e, 0x63, 0x01, 0xd2, 0xa5, 0xbe, 0x00, 0x26, 0x7e, 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, - 0xa0, 0xc8, 0x12, 0x62, 0xb6, 0x40, 0x18, 0x75, 0x31, 0xb3, 0x12, 0x7c, 0x15, 0xc2, 0x1b, 0x6c, - 0x00, 0x7a, 0x03, 0x01, 0xd2, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, - 0x7e, 0x27, 0x01, 0x97, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x24, 0x7e, 0x24, 0x84, 0x00, 0x09, 0xb2, - 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, - 0x56, 0x90, 0x7d, 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, 0x7e, 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, - 0x01, 0xa7, 0x68, 0x0d, 0x7a, 0x27, 0x01, 0xa7, 0x7e, 0x60, 0x9c, 0x7a, 0x63, 0x01, 0xd3, 0x80, - 0x2e, 0x7e, 0x63, 0x01, 0xd3, 0xa5, 0xbe, 0x00, 0x26, 0x7e, 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, - 0xa0, 0xc8, 0x12, 0x62, 0xb6, 0x40, 0x18, 0x75, 0x31, 0xb3, 0x12, 0x7c, 0x15, 0xc2, 0x1c, 0x6c, - 0x00, 0x7a, 0x03, 0x01, 0xd3, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, - 0x7e, 0x27, 0x01, 0x99, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x24, 0x7e, 0x24, 0x85, 0x00, 0x09, 0xb2, - 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, - 0x59, 0xe8, 0x7d, 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, 0x7e, 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, - 0x01, 0xa9, 0x68, 0x0d, 0x7a, 0x27, 0x01, 0xa9, 0x7e, 0x60, 0x9c, 0x7a, 0x63, 0x01, 0xd4, 0x80, - 0x2e, 0x7e, 0x63, 0x01, 0xd4, 0xa5, 0xbe, 0x00, 0x26, 0x7e, 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, - 0xa0, 0xc8, 0x12, 0x62, 0xb6, 0x40, 0x18, 0x75, 0x31, 0xb3, 0x12, 0x7c, 0x15, 0xc2, 0x1d, 0x6c, - 0x00, 0x7a, 0x03, 0x01, 0xd4, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, - 0x7e, 0x27, 0x01, 0x9b, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x24, 0x7e, 0x24, 0x86, 0x00, 0x09, 0xb2, - 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, - 0x5d, 0x40, 0x7d, 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, 0x7e, 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, - 0x01, 0xab, 0x68, 0x0d, 0x7a, 0x27, 0x01, 0xab, 0x7e, 0x60, 0x9c, 0x7a, 0x63, 0x01, 0xd5, 0x80, - 0x2e, 0x7e, 0x63, 0x01, 0xd5, 0xa5, 0xbe, 0x00, 0x26, 0x7e, 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, - 0xa0, 0xc8, 0x12, 0x62, 0xb6, 0x40, 0x18, 0x75, 0x31, 0xb3, 0x12, 0x7c, 0x15, 0xc2, 0x1e, 0x6c, - 0x00, 0x7a, 0x03, 0x01, 0xd5, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, - 0x7e, 0x27, 0x01, 0x9d, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x24, 0x7e, 0x24, 0x87, 0x00, 0x09, 0xb2, - 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, - 0x60, 0x98, 0x7d, 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, 0x7e, 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, - 0x01, 0xad, 0x68, 0x0d, 0x7a, 0x27, 0x01, 0xad, 0x7e, 0x60, 0x9c, 0x7a, 0x63, 0x01, 0xd6, 0x80, - 0x2e, 0x7e, 0x63, 0x01, 0xd6, 0xa5, 0xbe, 0x00, 0x26, 0x7e, 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, - 0xa0, 0xc8, 0x12, 0x62, 0xb6, 0x40, 0x18, 0x75, 0x31, 0xb3, 0x12, 0x7c, 0x15, 0xc2, 0x1f, 0x6c, - 0x00, 0x7a, 0x03, 0x01, 0xd6, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, - 0xc2, 0xaf, 0xe5, 0x24, 0x60, 0x14, 0x7e, 0x20, 0x00, 0x13, 0x50, 0x07, 0xca, 0xb8, 0x12, 0x35, - 0x3d, 0xda, 0xb8, 0xa5, 0x0a, 0xbe, 0x21, 0x2f, 0x78, 0xef, 0xd2, 0xaf, 0x22, 0x7c, 0xb2, 0x23, - 0x0a, 0x2b, 0x49, 0x22, 0x35, 0x48, 0x89, 0x24, 0x35, 0x58, 0x35, 0x92, 0x35, 0xcc, 0x36, 0x06, - 0x36, 0x40, 0x36, 0x7a, 0x36, 0xb4, 0x36, 0xee, 0x7e, 0x24, 0x80, 0x00, 0x09, 0xb2, 0x00, 0x14, - 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x49, 0x30, - 0x7d, 0x21, 0xda, 0x19, 0x5e, 0xb0, 0x01, 0x7e, 0xa0, 0x90, 0x12, 0x62, 0x93, 0x40, 0x12, 0x75, - 0x31, 0xb8, 0x12, 0x7c, 0x15, 0xc2, 0x20, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, - 0xf1, 0x22, 0x7e, 0x24, 0x81, 0x00, 0x09, 0xb2, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, - 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x4c, 0x88, 0x7d, 0x21, 0xda, 0x19, 0x5e, 0xb0, - 0x01, 0x7e, 0xa0, 0x90, 0x12, 0x62, 0x93, 0x40, 0x12, 0x75, 0x31, 0xb8, 0x12, 0x7c, 0x15, 0xc2, - 0x21, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0x7e, 0x24, 0x82, 0x00, - 0x09, 0xb2, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, - 0x12, 0x12, 0x4f, 0xe0, 0x7d, 0x21, 0xda, 0x19, 0x5e, 0xb0, 0x01, 0x7e, 0xa0, 0x90, 0x12, 0x62, - 0x93, 0x40, 0x12, 0x75, 0x31, 0xb8, 0x12, 0x7c, 0x15, 0xc2, 0x22, 0xc0, 0xf1, 0x75, 0xf1, 0x01, - 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0x7e, 0x24, 0x83, 0x00, 0x09, 0xb2, 0x00, 0x14, 0xca, 0xb8, - 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x53, 0x38, 0x7d, 0x21, - 0xda, 0x19, 0x5e, 0xb0, 0x01, 0x7e, 0xa0, 0x90, 0x12, 0x62, 0x93, 0x40, 0x12, 0x75, 0x31, 0xb8, - 0x12, 0x7c, 0x15, 0xc2, 0x23, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, - 0x7e, 0x24, 0x84, 0x00, 0x09, 0xb2, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, - 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x56, 0x90, 0x7d, 0x21, 0xda, 0x19, 0x5e, 0xb0, 0x01, 0x7e, - 0xa0, 0x90, 0x12, 0x62, 0x93, 0x40, 0x12, 0x75, 0x31, 0xb8, 0x12, 0x7c, 0x15, 0xc2, 0x24, 0xc0, - 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0x7e, 0x24, 0x85, 0x00, 0x09, 0xb2, - 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, - 0x59, 0xe8, 0x7d, 0x21, 0xda, 0x19, 0x5e, 0xb0, 0x01, 0x7e, 0xa0, 0x90, 0x12, 0x62, 0x93, 0x40, - 0x12, 0x75, 0x31, 0xb8, 0x12, 0x7c, 0x15, 0xc2, 0x25, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, - 0xd9, 0xd0, 0xf1, 0x22, 0x7e, 0x24, 0x86, 0x00, 0x09, 0xb2, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, - 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x5d, 0x40, 0x7d, 0x21, 0xda, 0x19, - 0x5e, 0xb0, 0x01, 0x7e, 0xa0, 0x90, 0x12, 0x62, 0x93, 0x40, 0x12, 0x75, 0x31, 0xb8, 0x12, 0x7c, - 0x15, 0xc2, 0x26, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0x7e, 0x24, - 0x87, 0x00, 0x09, 0xb2, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, - 0x19, 0x7d, 0x12, 0x12, 0x60, 0x98, 0x7d, 0x21, 0xda, 0x19, 0x5e, 0xb0, 0x01, 0x7e, 0xa0, 0x90, - 0x12, 0x62, 0x93, 0x40, 0x12, 0x75, 0x31, 0xb8, 0x12, 0x7c, 0x15, 0xc2, 0x27, 0xc0, 0xf1, 0x75, - 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0xc2, 0xaf, 0xe5, 0x33, 0x60, 0x14, 0x7e, 0x20, - 0x00, 0x13, 0x50, 0x07, 0xca, 0xb8, 0x12, 0x37, 0x45, 0xda, 0xb8, 0xa5, 0x0a, 0xbe, 0x21, 0x2f, - 0x78, 0xef, 0xd2, 0xaf, 0x22, 0x7c, 0xb2, 0x23, 0x0a, 0x2b, 0x49, 0x22, 0x37, 0x50, 0x89, 0x24, - 0x37, 0x60, 0x37, 0x7f, 0x37, 0x9e, 0x37, 0xbd, 0x37, 0xdc, 0x37, 0xfb, 0x38, 0x1a, 0x38, 0x39, - 0x7e, 0x24, 0x80, 0x00, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x48, 0x1b, 0xda, 0x19, 0x10, 0x04, 0x02, - 0x80, 0x0c, 0xd2, 0x01, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0x7e, - 0x24, 0x81, 0x00, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x4b, 0x73, 0xda, 0x19, 0x10, 0x04, 0x02, 0x80, - 0x0c, 0xd2, 0x01, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0x7e, 0x24, - 0x82, 0x00, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x4e, 0xcb, 0xda, 0x19, 0x10, 0x04, 0x02, 0x80, 0x0c, - 0xd2, 0x01, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0x7e, 0x24, 0x83, - 0x00, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x52, 0x23, 0xda, 0x19, 0x10, 0x04, 0x02, 0x80, 0x0c, 0xd2, - 0x01, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0x7e, 0x24, 0x84, 0x00, - 0xca, 0x19, 0x7d, 0x12, 0x12, 0x55, 0x7b, 0xda, 0x19, 0x10, 0x04, 0x02, 0x80, 0x0c, 0xd2, 0x01, - 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0x7e, 0x24, 0x85, 0x00, 0xca, - 0x19, 0x7d, 0x12, 0x12, 0x58, 0xd3, 0xda, 0x19, 0x10, 0x04, 0x02, 0x80, 0x0c, 0xd2, 0x01, 0xc0, - 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0x7e, 0x24, 0x86, 0x00, 0xca, 0x19, - 0x7d, 0x12, 0x12, 0x5c, 0x2b, 0xda, 0x19, 0x10, 0x04, 0x02, 0x80, 0x0c, 0xd2, 0x01, 0xc0, 0xf1, - 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0x7e, 0x24, 0x87, 0x00, 0xca, 0x19, 0x7d, - 0x12, 0x12, 0x5f, 0x83, 0xda, 0x19, 0x10, 0x04, 0x02, 0x80, 0x0c, 0xd2, 0x01, 0xc0, 0xf1, 0x75, - 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0xc2, 0xaf, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0xa9, - 0x32, 0xf2, 0x1a, 0x7e, 0x07, 0x01, 0xe1, 0xbe, 0x04, 0x00, 0x00, 0x78, 0x10, 0xe5, 0xf5, 0x33, - 0x82, 0xe7, 0x40, 0x09, 0x85, 0x31, 0x31, 0x12, 0x7c, 0x15, 0x75, 0xf6, 0x00, 0xd0, 0xf1, 0xd2, - 0xaf, 0x22, - -// Segment #15, Start Address 00ff4000, Length 15381 -0xff,0x00,0x00,0x40,0x15,0x3c, - 0x7e, 0x04, 0x00, 0x01, 0x7e, 0x14, 0x7f, 0xf8, 0x7e, 0x24, 0x00, 0xfe, 0x7d, 0x31, 0x0b, 0x1a, - 0x50, 0x1b, 0x0a, 0x50, 0x7e, 0x14, 0x40, 0x1b, 0x02, 0x40, 0x6a, 0x7e, 0xf8, 0x00, 0x6f, 0xd2, - 0x04, 0xc2, 0x94, 0xd2, 0x95, 0x7e, 0xf4, 0x40, 0x2c, 0x02, 0x40, 0x7c, 0x12, 0x7d, 0x30, 0xf5, - 0x2f, 0x7a, 0xa1, 0x30, 0x7a, 0x11, 0x6e, 0x12, 0x75, 0xca, 0x12, 0x40, 0xdc, 0x7e, 0xb3, 0x3f, - 0xf1, 0x60, 0x03, 0x12, 0x43, 0xd4, 0x75, 0xf1, 0x00, 0x12, 0x76, 0x6f, 0xd2, 0xaf, 0x02, 0x30, - 0x00, 0x7e, 0x04, 0x00, 0xff, 0x7e, 0x18, 0x40, 0x5f, 0x7a, 0x1c, 0x00, 0x01, 0x89, 0x18, 0xa9, - 0x25, 0x87, 0x03, 0xa9, 0xd5, 0x87, 0xd2, 0x93, 0x89, 0x08, 0x7e, 0x04, 0x00, 0xff, 0x7e, 0x18, - 0x40, 0x78, 0x7a, 0x1c, 0x00, 0x01, 0x89, 0x18, 0xc2, 0x93, 0x89, 0x08, 0x7e, 0x08, 0x00, 0x20, - 0x7e, 0x44, 0x04, 0x00, 0x7e, 0x40, 0x00, 0x7e, 0xe4, 0x40, 0x8e, 0x02, 0x7c, 0x30, 0x7e, 0x08, - 0x01, 0x6f, 0x7e, 0x44, 0x28, 0x7c, 0x7e, 0x40, 0x00, 0x7e, 0xe4, 0x40, 0xa0, 0x02, 0x7c, 0x30, - 0x7e, 0x08, 0x00, 0x6f, 0x7e, 0x44, 0x01, 0x00, 0x7e, 0x40, 0x53, 0x7e, 0xe4, 0x40, 0xb2, 0x02, - 0x7c, 0x30, 0x75, 0x6d, 0x20, 0x75, 0x6c, 0x30, 0x7e, 0x04, 0x00, 0x08, 0x75, 0x6a, 0x58, 0x75, - 0x6b, 0x08, 0x75, 0x67, 0x08, 0x75, 0x69, 0x01, 0x75, 0x89, 0x01, 0x75, 0x8a, 0x01, 0x75, 0x8c, - 0x00, 0xd2, 0x8c, 0x7e, 0x04, 0x00, 0x02, 0x7a, 0x05, 0x58, 0x89, 0xf4, 0x75, 0xb7, 0x7f, 0x75, - 0xb8, 0x7f, 0x75, 0xb3, 0x07, 0x75, 0xb2, 0x07, 0xd2, 0xa9, 0x22, 0xd2, 0x92, 0xe4, 0xd5, 0xe0, - 0xfd, 0xc2, 0x92, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x2f, 0x7e, 0xa0, 0x08, 0x19, 0xa2, 0x00, - 0x10, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xf2, 0x7e, 0x20, 0x00, 0x12, 0x41, 0x7e, 0x0b, 0x20, - 0xbe, 0x21, 0x2f, 0x78, 0xf6, 0x22, 0x7e, 0x04, 0x80, 0x00, 0x4c, 0x02, 0x74, 0xbf, 0x19, 0xb0, - 0x00, 0x0c, 0x74, 0x10, 0x19, 0xb0, 0x00, 0x08, 0x74, 0x80, 0x19, 0xb0, 0x00, 0x0c, 0x7e, 0x54, - 0x00, 0x02, 0x19, 0xa0, 0x00, 0x04, 0x19, 0xb0, 0x00, 0x00, 0x74, 0x03, 0x19, 0xb0, 0x00, 0x0c, - 0x74, 0x07, 0xa9, 0x20, 0x30, 0x0b, 0xa9, 0x35, 0x30, 0x05, 0xbe, 0x20, 0x01, 0x28, 0x02, 0x74, - 0x0f, 0x19, 0xb0, 0x00, 0x04, 0xa9, 0x33, 0x30, 0x18, 0x74, 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0x74, - 0x28, 0xa9, 0x20, 0x30, 0x02, 0x74, 0x20, 0x19, 0xb0, 0x00, 0x04, 0x74, 0x03, 0x19, 0xb0, 0x00, - 0x0c, 0x74, 0xa7, 0x19, 0xb0, 0x00, 0x08, 0x74, 0x0c, 0x19, 0xb0, 0x00, 0x10, 0x22, 0x7e, 0x04, - 0x80, 0x00, 0x4c, 0x02, 0xe4, 0x19, 0xb0, 0x00, 0x04, 0x09, 0xb0, 0x00, 0x10, 0x54, 0x08, 0x19, - 0xb0, 0x00, 0x10, 0x74, 0xa7, 0x19, 0xb0, 0x00, 0x08, 0x22, 0x7c, 0xb2, 0x23, 0x0a, 0x2b, 0x49, - 0x22, 0x41, 0xa5, 0x89, 0x24, 0x41, 0xb5, 0x41, 0xd4, 0x41, 0xf3, 0x42, 0x12, 0x42, 0x31, 0x42, - 0x50, 0x42, 0x6f, 0x42, 0x8e, 0xc2, 0x10, 0xc2, 0x18, 0xc2, 0x20, 0xc2, 0x08, 0x7e, 0x04, 0x09, - 0xe3, 0x7a, 0x07, 0x01, 0x6f, 0x7a, 0x07, 0x01, 0x7f, 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x8f, 0x7a, - 0x07, 0x01, 0x9f, 0x22, 0xc2, 0x11, 0xc2, 0x19, 0xc2, 0x21, 0xc2, 0x09, 0x7e, 0x04, 0x0d, 0xe3, - 0x7a, 0x07, 0x01, 0x71, 0x7a, 0x07, 0x01, 0x81, 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x91, 0x7a, 0x07, - 0x01, 0xa1, 0x22, 0xc2, 0x12, 0xc2, 0x1a, 0xc2, 0x22, 0xc2, 0x0a, 0x7e, 0x04, 0x11, 0xe3, 0x7a, - 0x07, 0x01, 0x73, 0x7a, 0x07, 0x01, 0x83, 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x93, 0x7a, 0x07, 0x01, - 0xa3, 0x22, 0xc2, 0x13, 0xc2, 0x1b, 0xc2, 0x23, 0xc2, 0x0b, 0x7e, 0x04, 0x15, 0xe3, 0x7a, 0x07, - 0x01, 0x75, 0x7a, 0x07, 0x01, 0x85, 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x95, 0x7a, 0x07, 0x01, 0xa5, - 0x22, 0xc2, 0x14, 0xc2, 0x1c, 0xc2, 0x24, 0xc2, 0x0c, 0x7e, 0x04, 0x19, 0xe3, 0x7a, 0x07, 0x01, - 0x77, 0x7a, 0x07, 0x01, 0x87, 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x97, 0x7a, 0x07, 0x01, 0xa7, 0x22, - 0xc2, 0x15, 0xc2, 0x1d, 0xc2, 0x25, 0xc2, 0x0d, 0x7e, 0x04, 0x1d, 0xe3, 0x7a, 0x07, 0x01, 0x79, - 0x7a, 0x07, 0x01, 0x89, 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x99, 0x7a, 0x07, 0x01, 0xa9, 0x22, 0xc2, - 0x16, 0xc2, 0x1e, 0xc2, 0x26, 0xc2, 0x0e, 0x7e, 0x04, 0x21, 0xe3, 0x7a, 0x07, 0x01, 0x7b, 0x7a, - 0x07, 0x01, 0x8b, 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x9b, 0x7a, 0x07, 0x01, 0xab, 0x22, 0xc2, 0x17, - 0xc2, 0x1f, 0xc2, 0x27, 0xc2, 0x0f, 0x7e, 0x04, 0x25, 0xe3, 0x7a, 0x07, 0x01, 0x7d, 0x7a, 0x07, - 0x01, 0x8d, 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x9d, 0x7a, 0x07, 0x01, 0xad, 0x22, 0x7c, 0xb2, 0x23, - 0x0a, 0x2b, 0x49, 0x22, 0x42, 0xb8, 0x89, 0x24, 0x42, 0xc8, 0x42, 0xe9, 0x43, 0x0a, 0x43, 0x2b, - 0x43, 0x4c, 0x43, 0x6d, 0x43, 0x8e, 0x43, 0xaf, 0x30, 0x50, 0x07, 0x20, 0x68, 0x04, 0xc2, 0x28, - 0x80, 0x16, 0x30, 0x40, 0x07, 0x20, 0x60, 0x04, 0xc2, 0x28, 0x80, 0x0c, 0x30, 0x48, 0x07, 0x20, - 0x58, 0x04, 0xc2, 0x28, 0x80, 0x02, 0xd2, 0x28, 0x22, 0x30, 0x51, 0x07, 0x20, 0x69, 0x04, 0xc2, - 0x29, 0x80, 0x16, 0x30, 0x41, 0x07, 0x20, 0x61, 0x04, 0xc2, 0x29, 0x80, 0x0c, 0x30, 0x49, 0x07, - 0x20, 0x59, 0x04, 0xc2, 0x29, 0x80, 0x02, 0xd2, 0x29, 0x22, 0x30, 0x52, 0x07, 0x20, 0x6a, 0x04, - 0xc2, 0x2a, 0x80, 0x16, 0x30, 0x42, 0x07, 0x20, 0x62, 0x04, 0xc2, 0x2a, 0x80, 0x0c, 0x30, 0x4a, - 0x07, 0x20, 0x5a, 0x04, 0xc2, 0x2a, 0x80, 0x02, 0xd2, 0x2a, 0x22, 0x30, 0x53, 0x07, 0x20, 0x6b, - 0x04, 0xc2, 0x2b, 0x80, 0x16, 0x30, 0x43, 0x07, 0x20, 0x63, 0x04, 0xc2, 0x2b, 0x80, 0x0c, 0x30, - 0x4b, 0x07, 0x20, 0x5b, 0x04, 0xc2, 0x2b, 0x80, 0x02, 0xd2, 0x2b, 0x22, 0x30, 0x54, 0x07, 0x20, - 0x6c, 0x04, 0xc2, 0x2c, 0x80, 0x16, 0x30, 0x44, 0x07, 0x20, 0x64, 0x04, 0xc2, 0x2c, 0x80, 0x0c, - 0x30, 0x4c, 0x07, 0x20, 0x5c, 0x04, 0xc2, 0x2c, 0x80, 0x02, 0xd2, 0x2c, 0x22, 0x30, 0x55, 0x07, - 0x20, 0x6d, 0x04, 0xc2, 0x2d, 0x80, 0x16, 0x30, 0x45, 0x07, 0x20, 0x65, 0x04, 0xc2, 0x2d, 0x80, - 0x0c, 0x30, 0x4d, 0x07, 0x20, 0x5d, 0x04, 0xc2, 0x2d, 0x80, 0x02, 0xd2, 0x2d, 0x22, 0x30, 0x56, - 0x07, 0x20, 0x6e, 0x04, 0xc2, 0x2e, 0x80, 0x16, 0x30, 0x46, 0x07, 0x20, 0x66, 0x04, 0xc2, 0x2e, - 0x80, 0x0c, 0x30, 0x4e, 0x07, 0x20, 0x5e, 0x04, 0xc2, 0x2e, 0x80, 0x02, 0xd2, 0x2e, 0x22, 0x30, - 0x57, 0x07, 0x20, 0x6f, 0x04, 0xc2, 0x2f, 0x80, 0x16, 0x30, 0x47, 0x07, 0x20, 0x67, 0x04, 0xc2, - 0x2f, 0x80, 0x0c, 0x30, 0x4f, 0x07, 0x20, 0x5f, 0x04, 0xc2, 0x2f, 0x80, 0x02, 0xd2, 0x2f, 0x22, - 0x44, 0x38, 0x43, 0xe5, 0xbe, 0xb0, 0x02, 0x40, 0x01, 0x22, 0x23, 0x0a, 0x5b, 0x49, 0x55, 0x43, - 0xd0, 0x99, 0x54, 0xd3, 0x22, 0xa9, 0xc5, 0x87, 0x12, 0x44, 0x43, 0x7e, 0x04, 0x05, 0xe3, 0x7a, - 0x07, 0x01, 0xd7, 0x7a, 0x07, 0x01, 0xd9, 0x7e, 0x04, 0x01, 0xe3, 0x7a, 0x07, 0x01, 0xdd, 0x7a, - 0x07, 0x01, 0xdf, 0x7e, 0x04, 0x74, 0xad, 0x7a, 0x05, 0x61, 0x75, 0xf1, 0x01, 0x75, 0xe1, 0x1f, - 0x75, 0xe4, 0x04, 0x75, 0xf4, 0x04, 0x75, 0xf1, 0x02, 0x75, 0xe1, 0x03, 0x75, 0xe4, 0x04, 0x75, - 0xf4, 0x04, 0x43, 0xa2, 0x1c, 0x12, 0x40, 0xeb, 0x7e, 0x20, 0x00, 0x12, 0x41, 0x9a, 0x0b, 0x20, - 0xbe, 0x21, 0x2f, 0x78, 0xf6, 0xd2, 0xa8, 0x22, 0xa9, 0xd5, 0x87, 0x12, 0x44, 0x43, 0xd2, 0x92, - 0xc2, 0xa8, 0x22, 0x75, 0xa3, 0x00, 0x53, 0xa2, 0x03, 0x75, 0xc1, 0x00, 0x53, 0xc0, 0x03, 0x7e, - 0x00, 0x05, 0x7a, 0x01, 0xf1, 0x43, 0xf4, 0x80, 0x43, 0xe4, 0x80, 0xe5, 0xf2, 0x54, 0x7f, 0x44, - 0x08, 0xf5, 0xf2, 0xe5, 0xe2, 0x54, 0x7f, 0x44, 0x08, 0xf5, 0xe2, 0x75, 0xe1, 0x10, 0xa5, 0xd8, - 0xe1, 0x22, 0xca, 0x09, 0x12, 0x30, 0x20, 0x10, 0x01, 0x12, 0xd5, 0x67, 0x1e, 0x63, 0x69, 0x01, - 0x7e, 0x00, 0x6a, 0x2e, 0x01, 0x69, 0xa5, 0xe6, 0xf5, 0x67, 0x80, 0x12, 0x20, 0x02, 0x1e, 0x75, - 0x69, 0x00, 0x85, 0x6a, 0x67, 0xd2, 0x02, 0x74, 0x00, 0x80, 0x0d, 0x30, 0x02, 0x0f, 0xc2, 0x02, - 0x7e, 0x00, 0x6c, 0x2e, 0x01, 0x69, 0xa5, 0xe6, 0x53, 0x90, 0xcf, 0x42, 0x90, 0xda, 0x09, 0x32, - 0xc0, 0xd0, 0xc0, 0xd1, 0xc0, 0xe0, 0xc0, 0xf0, 0xca, 0x0b, 0xca, 0x1b, 0xca, 0x2b, 0xd2, 0x01, - 0x75, 0x31, 0x89, 0x12, 0x7c, 0x15, 0x7e, 0x14, 0x80, 0x00, 0x09, 0xb1, 0x00, 0x08, 0x20, 0xe0, - 0x03, 0x02, 0x45, 0x4f, 0x20, 0x78, 0x5a, 0xa5, 0x0a, 0x09, 0xb1, 0x00, 0x08, 0x20, 0xe0, 0x03, - 0x02, 0x45, 0x67, 0x20, 0x79, 0x4b, 0xa5, 0x0a, 0x09, 0xb1, 0x00, 0x08, 0x20, 0xe0, 0x03, 0x02, - 0x45, 0x7f, 0xa5, 0x0a, 0x09, 0xb1, 0x00, 0x08, 0x20, 0xe0, 0x03, 0x02, 0x45, 0x97, 0x20, 0x7a, - 0x30, 0xa5, 0x0a, 0x09, 0xb1, 0x00, 0x08, 0x20, 0xe0, 0x03, 0x02, 0x45, 0xaf, 0xa5, 0x0a, 0x09, - 0xb1, 0x00, 0x08, 0x20, 0xe0, 0x03, 0x02, 0x45, 0xc7, 0xa5, 0x0a, 0x09, 0xb1, 0x00, 0x08, 0x20, - 0xe0, 0x03, 0x02, 0x45, 0xdf, 0xa5, 0x0a, 0x09, 0xb1, 0x00, 0x08, 0x20, 0xe0, 0x03, 0x02, 0x45, - 0xf7, 0x30, 0x04, 0x0c, 0xc2, 0x04, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, - 0xda, 0x2b, 0xda, 0x1b, 0xda, 0x0b, 0xd0, 0xf0, 0xd0, 0xe0, 0xd0, 0xd1, 0xd0, 0xd0, 0x32, 0x75, - 0x31, 0x80, 0x12, 0x7c, 0x15, 0x54, 0x3e, 0x0a, 0x5b, 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x63, - 0x2b, 0xca, 0x06, 0xc6, 0x44, 0x89, 0x54, 0x75, 0x31, 0x81, 0x12, 0x7c, 0x15, 0x54, 0x3e, 0x0a, - 0x5b, 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x63, 0x6b, 0xca, 0x06, 0xc6, 0x44, 0x89, 0x54, 0x75, - 0x31, 0x82, 0x12, 0x7c, 0x15, 0x54, 0x3e, 0x0a, 0x5b, 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x63, - 0xab, 0xca, 0x06, 0xc6, 0x44, 0x89, 0x54, 0x75, 0x31, 0x83, 0x12, 0x7c, 0x15, 0x54, 0x3e, 0x0a, - 0x5b, 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x63, 0xeb, 0xca, 0x06, 0xc6, 0x44, 0x89, 0x54, 0x75, - 0x31, 0x84, 0x12, 0x7c, 0x15, 0x54, 0x3e, 0x0a, 0x5b, 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x64, - 0x2b, 0xca, 0x06, 0xc6, 0x44, 0x89, 0x54, 0x75, 0x31, 0x85, 0x12, 0x7c, 0x15, 0x54, 0x3e, 0x0a, - 0x5b, 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x64, 0x6b, 0xca, 0x06, 0xc6, 0x44, 0x89, 0x54, 0x75, - 0x31, 0x86, 0x12, 0x7c, 0x15, 0x54, 0x3e, 0x0a, 0x5b, 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x64, - 0xab, 0xca, 0x06, 0xc6, 0x44, 0x89, 0x54, 0x75, 0x31, 0x87, 0x12, 0x7c, 0x15, 0x54, 0x3e, 0x0a, - 0x5b, 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x64, 0xeb, 0xca, 0x06, 0xc6, 0x44, 0x89, 0x54, 0x10, - 0x08, 0x01, 0x22, 0x20, 0x28, 0x03, 0xd2, 0x08, 0x22, 0x75, 0x31, 0xa0, 0x12, 0x7c, 0x15, 0x7e, - 0x14, 0x80, 0x00, 0x80, 0x06, 0x20, 0x28, 0x03, 0xd2, 0x08, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, - 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x03, 0x12, 0x49, 0x30, 0x20, 0xe6, 0x03, 0xd2, 0x08, - 0x22, 0x30, 0x30, 0x49, 0xd2, 0x70, 0x7e, 0x37, 0x01, 0x8f, 0x7e, 0x27, 0x01, 0xaf, 0x9d, 0x32, - 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, 0x48, 0x7a, 0x05, 0x48, 0x7a, 0x37, 0x01, 0x8f, 0x7e, 0x37, - 0x01, 0x6f, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x0d, 0xe2, 0x38, 0x68, 0x7a, 0x47, 0x01, 0x6f, - 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x12, 0x65, 0x2b, 0x10, - 0x70, 0xc4, 0x22, 0xc2, 0x70, 0x2d, 0x23, 0x68, 0x78, 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, 0x01, - 0x8f, 0xbe, 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, 0x27, 0x01, 0xaf, 0x28, 0x04, 0x7e, 0x27, 0x01, - 0xaf, 0x7e, 0x37, 0x01, 0x8f, 0x9d, 0x32, 0x7d, 0x02, 0x2e, 0x05, 0x48, 0x7a, 0x05, 0x48, 0x7a, - 0x37, 0x01, 0x8f, 0x7e, 0x37, 0x01, 0x6f, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x0d, 0xe2, 0x38, - 0x13, 0x7a, 0x47, 0x01, 0x6f, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, - 0x15, 0x02, 0x65, 0x2b, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, - 0x9e, 0x44, 0x0d, 0xe3, 0x9d, 0x24, 0x12, 0x65, 0x2b, 0x7e, 0x34, 0x09, 0xe3, 0x7d, 0x24, 0x2d, - 0x43, 0x7a, 0x47, 0x01, 0x6f, 0x12, 0x65, 0x2b, 0xbe, 0x25, 0x20, 0x78, 0x03, 0x02, 0x46, 0x7f, - 0x22, 0xd2, 0x08, 0x7e, 0x04, 0x09, 0xe3, 0x7a, 0x07, 0x01, 0x6f, 0x7a, 0x07, 0x01, 0x7f, 0x75, - 0x31, 0x94, 0x12, 0x7c, 0x15, 0x75, 0x31, 0x00, 0x12, 0x7c, 0x15, 0x22, 0x75, 0x31, 0x92, 0x12, - 0x7c, 0x15, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, 0x70, - 0x7e, 0x37, 0x01, 0xe1, 0x7e, 0x27, 0x01, 0xbf, 0x2e, 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, 0x34, - 0x04, 0x00, 0x38, 0x3c, 0x7d, 0x02, 0x2e, 0x05, 0x46, 0x7a, 0x05, 0x46, 0x7a, 0x37, 0x01, 0xe1, - 0x7e, 0x37, 0x01, 0xdf, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x05, 0xe2, 0x38, 0x44, 0x7a, 0x47, - 0x01, 0xdf, 0x7e, 0x24, 0x00, 0x00, 0x2e, 0x27, 0x01, 0xbf, 0x1b, 0x38, 0x20, 0x0b, 0x35, 0x7a, - 0x51, 0x31, 0x12, 0x7c, 0x15, 0xbe, 0x50, 0x38, 0x78, 0x03, 0x02, 0x66, 0x16, 0x02, 0x65, 0xfb, - 0x75, 0x31, 0x99, 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, - 0x30, 0x38, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x10, 0x22, - 0x80, 0x7d, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x9e, 0x44, 0x05, 0xe3, 0x9d, 0x24, 0x7e, 0x64, - 0x00, 0x00, 0x2e, 0x67, 0x01, 0xbf, 0x9e, 0x24, 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, - 0x35, 0x12, 0x65, 0xfb, 0x7e, 0x34, 0x01, 0xe3, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xdf, - 0x02, 0x65, 0xfb, 0x7a, 0x39, 0xc0, 0x7e, 0x34, 0x01, 0xe3, 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, - 0x44, 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, 0x54, 0x0f, 0x23, 0x23, 0x23, 0x44, 0x00, 0x7a, 0x69, - 0xb0, 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, 0x31, 0x93, 0x12, 0x7c, 0x15, 0x7a, 0x71, 0x31, 0x12, - 0x7c, 0x15, 0xbd, 0x04, 0x68, 0x29, 0x7a, 0x07, 0x01, 0xdf, 0x7e, 0x47, 0x01, 0xe1, 0x2d, 0x43, - 0x7a, 0x47, 0x01, 0xe1, 0x2e, 0x35, 0x46, 0x7a, 0x35, 0x46, 0x22, 0x09, 0xb1, 0x00, 0x14, 0x20, - 0xe0, 0x13, 0x22, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0x2a, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0x2c, 0x7e, - 0x04, 0x01, 0xe3, 0x80, 0xd1, 0xd2, 0x04, 0x7e, 0x07, 0x01, 0xe1, 0x7e, 0x24, 0x03, 0xfe, 0x9d, - 0x20, 0x28, 0x40, 0x7e, 0x07, 0x01, 0xdf, 0x7e, 0x44, 0x05, 0xe3, 0x7d, 0x60, 0x0b, 0x04, 0xbd, - 0x04, 0x68, 0xd0, 0x7d, 0x70, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xce, 0x7d, 0x54, 0x9d, 0x50, 0xbd, - 0x25, 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, - 0x01, 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, 0x7a, 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, - 0x02, 0x47, 0xe3, 0x75, 0x31, 0x99, 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, - 0xb1, 0x00, 0x04, 0x30, 0x38, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, - 0xd2, 0x10, 0x22, 0xda, 0xb8, 0x30, 0xe0, 0xd8, 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, 0x12, 0x47, - 0xe3, 0xda, 0xb8, 0x02, 0x49, 0x30, 0x09, 0xb1, 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, 0x31, 0x90, - 0x12, 0x7c, 0x15, 0xf5, 0x31, 0x12, 0x7c, 0x15, 0xa5, 0xfc, 0x5e, 0xb0, 0xf0, 0xa5, 0xfd, 0x09, - 0xb1, 0x00, 0x18, 0x4c, 0x4b, 0x5e, 0xb0, 0xf0, 0xbc, 0xb5, 0x78, 0xf1, 0x5e, 0x40, 0x0f, 0x4c, - 0x54, 0x7c, 0xb5, 0x5e, 0x50, 0x0b, 0x68, 0x2a, 0xa5, 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, 0xd2, - 0x68, 0x80, 0x02, 0xc2, 0x68, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x60, 0x80, 0x02, - 0xc2, 0x60, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x58, 0x80, 0x02, 0xc2, 0x58, 0x12, - 0x42, 0xc8, 0x02, 0x62, 0x93, 0x75, 0x31, 0x91, 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x14, 0x7a, - 0xb1, 0x31, 0x12, 0x7c, 0x15, 0x20, 0xe0, 0x08, 0xd2, 0x04, 0x7e, 0xa0, 0x80, 0x02, 0x62, 0x93, - 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, 0x12, 0x62, 0x93, 0xca, 0xb8, 0x5e, 0xb0, 0x1c, - 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, 0x61, 0x00, 0x00, 0x12, 0x62, 0xb6, 0x09, 0xb1, - 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x48, 0x35, 0x75, 0x31, 0x95, 0x12, 0x7c, 0x15, 0x22, - 0x75, 0x31, 0x96, 0x12, 0x7c, 0x15, 0x22, 0x10, 0x09, 0x01, 0x22, 0x20, 0x29, 0x03, 0xd2, 0x09, - 0x22, 0x75, 0x31, 0xa1, 0x12, 0x7c, 0x15, 0x7e, 0x14, 0x81, 0x00, 0x80, 0x06, 0x20, 0x29, 0x03, - 0xd2, 0x09, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x03, - 0x12, 0x4c, 0x88, 0x20, 0xe6, 0x03, 0xd2, 0x09, 0x22, 0x30, 0x31, 0x49, 0xd2, 0x71, 0x7e, 0x37, - 0x01, 0x91, 0x7e, 0x27, 0x01, 0xb1, 0x9d, 0x32, 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, 0x4a, 0x7a, - 0x05, 0x4a, 0x7a, 0x37, 0x01, 0x91, 0x7e, 0x37, 0x01, 0x71, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, - 0x11, 0xe2, 0x38, 0x68, 0x7a, 0x47, 0x01, 0x71, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, - 0x31, 0x12, 0x7c, 0x15, 0x12, 0x65, 0x2b, 0x10, 0x71, 0xc4, 0x22, 0xc2, 0x71, 0x2d, 0x23, 0x68, - 0x78, 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, 0x01, 0x91, 0xbe, 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, - 0x27, 0x01, 0xb1, 0x28, 0x04, 0x7e, 0x27, 0x01, 0xb1, 0x7e, 0x37, 0x01, 0x91, 0x9d, 0x32, 0x7d, - 0x02, 0x2e, 0x05, 0x4a, 0x7a, 0x05, 0x4a, 0x7a, 0x37, 0x01, 0x91, 0x7e, 0x37, 0x01, 0x71, 0x7d, - 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x11, 0xe2, 0x38, 0x13, 0x7a, 0x47, 0x01, 0x71, 0x75, 0x31, 0x94, - 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x02, 0x65, 0x2b, 0x75, 0x31, 0x94, 0x12, - 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x9e, 0x44, 0x11, 0xe3, 0x9d, 0x24, 0x12, 0x65, - 0x2b, 0x7e, 0x34, 0x0d, 0xe3, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0x71, 0x12, 0x65, 0x2b, - 0xbe, 0x25, 0x20, 0x78, 0x03, 0x02, 0x49, 0xd7, 0x22, 0xd2, 0x09, 0x7e, 0x04, 0x0d, 0xe3, 0x7a, - 0x07, 0x01, 0x71, 0x7a, 0x07, 0x01, 0x81, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x75, 0x31, 0x00, - 0x12, 0x7c, 0x15, 0x22, 0x75, 0x31, 0x92, 0x12, 0x7c, 0x15, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, - 0xca, 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, 0x70, 0x7e, 0x37, 0x01, 0xe1, 0x7e, 0x27, 0x01, 0xc1, - 0x2e, 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, 0x34, 0x04, 0x00, 0x38, 0x3c, 0x7d, 0x02, 0x2e, 0x05, - 0x46, 0x7a, 0x05, 0x46, 0x7a, 0x37, 0x01, 0xe1, 0x7e, 0x37, 0x01, 0xdf, 0x7d, 0x43, 0x2d, 0x42, - 0xbe, 0x44, 0x05, 0xe2, 0x38, 0x44, 0x7a, 0x47, 0x01, 0xdf, 0x7e, 0x24, 0x01, 0x00, 0x2e, 0x27, - 0x01, 0xc1, 0x1b, 0x38, 0x20, 0x0b, 0x35, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0xbe, 0x50, 0x38, - 0x78, 0x03, 0x02, 0x66, 0x16, 0x02, 0x65, 0xfb, 0x75, 0x31, 0x99, 0x12, 0x7c, 0x15, 0x09, 0xb1, - 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x39, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, - 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x11, 0x22, 0x80, 0x7d, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, - 0x9e, 0x44, 0x05, 0xe3, 0x9d, 0x24, 0x7e, 0x64, 0x01, 0x00, 0x2e, 0x67, 0x01, 0xc1, 0x9e, 0x24, - 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, 0x35, 0x12, 0x65, 0xfb, 0x7e, 0x34, 0x01, 0xe3, - 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xdf, 0x02, 0x65, 0xfb, 0x7a, 0x39, 0xc0, 0x7e, 0x34, - 0x01, 0xe3, 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, 0x44, 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, 0x54, - 0x0f, 0x23, 0x23, 0x23, 0x44, 0x01, 0x7a, 0x69, 0xb0, 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, 0x31, - 0x93, 0x12, 0x7c, 0x15, 0x7a, 0x71, 0x31, 0x12, 0x7c, 0x15, 0xbd, 0x04, 0x68, 0x29, 0x7a, 0x07, - 0x01, 0xdf, 0x7e, 0x47, 0x01, 0xe1, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xe1, 0x2e, 0x35, 0x46, 0x7a, - 0x35, 0x46, 0x22, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0x13, 0x22, 0x7e, 0x04, 0x01, 0xe3, 0x80, - 0x2a, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0x2c, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0xd1, 0xd2, 0x04, 0x7e, - 0x07, 0x01, 0xe1, 0x7e, 0x24, 0x03, 0xfe, 0x9d, 0x20, 0x28, 0x40, 0x7e, 0x07, 0x01, 0xdf, 0x7e, - 0x44, 0x05, 0xe3, 0x7d, 0x60, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd0, 0x7d, 0x70, 0x0b, 0x04, 0xbd, - 0x04, 0x68, 0xce, 0x7d, 0x54, 0x9d, 0x50, 0xbd, 0x25, 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, 0x09, - 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, 0x01, 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, 0x7a, - 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, 0x02, 0x4b, 0x3b, 0x75, 0x31, 0x99, 0x12, 0x7c, - 0x15, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x39, 0x0a, 0x09, 0xb1, - 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x11, 0x22, 0xda, 0xb8, 0x30, 0xe0, 0xd8, - 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, 0x12, 0x4b, 0x3b, 0xda, 0xb8, 0x02, 0x4c, 0x88, 0x09, 0xb1, - 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, 0x31, 0x90, 0x12, 0x7c, 0x15, 0xf5, 0x31, 0x12, 0x7c, 0x15, - 0xa5, 0xfc, 0x5e, 0xb0, 0xf0, 0xa5, 0xfd, 0x09, 0xb1, 0x00, 0x18, 0x4c, 0x4b, 0x5e, 0xb0, 0xf0, - 0xbc, 0xb5, 0x78, 0xf1, 0x5e, 0x40, 0x0f, 0x4c, 0x54, 0x7c, 0xb5, 0x5e, 0x50, 0x0b, 0x68, 0x2a, - 0xa5, 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, 0xd2, 0x69, 0x80, 0x02, 0xc2, 0x69, 0xa5, 0xfd, 0x5e, - 0x50, 0x20, 0x68, 0x04, 0xd2, 0x61, 0x80, 0x02, 0xc2, 0x61, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, - 0x04, 0xd2, 0x59, 0x80, 0x02, 0xc2, 0x59, 0x12, 0x42, 0xe9, 0x02, 0x62, 0x93, 0x75, 0x31, 0x91, - 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x14, 0x7a, 0xb1, 0x31, 0x12, 0x7c, 0x15, 0x20, 0xe0, 0x08, - 0xd2, 0x04, 0x7e, 0xa0, 0x80, 0x02, 0x62, 0x93, 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, - 0x12, 0x62, 0x93, 0xca, 0xb8, 0x5e, 0xb0, 0x1c, 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, - 0x61, 0x00, 0x00, 0x12, 0x62, 0xb6, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x4b, - 0x8d, 0x75, 0x31, 0x95, 0x12, 0x7c, 0x15, 0x22, 0x75, 0x31, 0x96, 0x12, 0x7c, 0x15, 0x22, 0x10, - 0x0a, 0x01, 0x22, 0x20, 0x2a, 0x03, 0xd2, 0x0a, 0x22, 0x75, 0x31, 0xa2, 0x12, 0x7c, 0x15, 0x7e, - 0x14, 0x82, 0x00, 0x80, 0x06, 0x20, 0x2a, 0x03, 0xd2, 0x0a, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, - 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x03, 0x12, 0x4f, 0xe0, 0x20, 0xe6, 0x03, 0xd2, 0x0a, - 0x22, 0x30, 0x32, 0x49, 0xd2, 0x72, 0x7e, 0x37, 0x01, 0x93, 0x7e, 0x27, 0x01, 0xb3, 0x9d, 0x32, - 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, 0x4c, 0x7a, 0x05, 0x4c, 0x7a, 0x37, 0x01, 0x93, 0x7e, 0x37, - 0x01, 0x73, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x15, 0xe2, 0x38, 0x68, 0x7a, 0x47, 0x01, 0x73, - 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x12, 0x65, 0x2b, 0x10, - 0x72, 0xc4, 0x22, 0xc2, 0x72, 0x2d, 0x23, 0x68, 0x78, 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, 0x01, - 0x93, 0xbe, 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, 0x27, 0x01, 0xb3, 0x28, 0x04, 0x7e, 0x27, 0x01, - 0xb3, 0x7e, 0x37, 0x01, 0x93, 0x9d, 0x32, 0x7d, 0x02, 0x2e, 0x05, 0x4c, 0x7a, 0x05, 0x4c, 0x7a, - 0x37, 0x01, 0x93, 0x7e, 0x37, 0x01, 0x73, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x15, 0xe2, 0x38, - 0x13, 0x7a, 0x47, 0x01, 0x73, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, - 0x15, 0x02, 0x65, 0x2b, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, - 0x9e, 0x44, 0x15, 0xe3, 0x9d, 0x24, 0x12, 0x65, 0x2b, 0x7e, 0x34, 0x11, 0xe3, 0x7d, 0x24, 0x2d, - 0x43, 0x7a, 0x47, 0x01, 0x73, 0x12, 0x65, 0x2b, 0xbe, 0x25, 0x20, 0x78, 0x03, 0x02, 0x4d, 0x2f, - 0x22, 0xd2, 0x0a, 0x7e, 0x04, 0x11, 0xe3, 0x7a, 0x07, 0x01, 0x73, 0x7a, 0x07, 0x01, 0x83, 0x75, - 0x31, 0x94, 0x12, 0x7c, 0x15, 0x75, 0x31, 0x00, 0x12, 0x7c, 0x15, 0x22, 0x75, 0x31, 0x92, 0x12, - 0x7c, 0x15, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, 0x70, - 0x7e, 0x37, 0x01, 0xe1, 0x7e, 0x27, 0x01, 0xc3, 0x2e, 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, 0x34, - 0x04, 0x00, 0x38, 0x3c, 0x7d, 0x02, 0x2e, 0x05, 0x46, 0x7a, 0x05, 0x46, 0x7a, 0x37, 0x01, 0xe1, - 0x7e, 0x37, 0x01, 0xdf, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x05, 0xe2, 0x38, 0x44, 0x7a, 0x47, - 0x01, 0xdf, 0x7e, 0x24, 0x02, 0x00, 0x2e, 0x27, 0x01, 0xc3, 0x1b, 0x38, 0x20, 0x0b, 0x35, 0x7a, - 0x51, 0x31, 0x12, 0x7c, 0x15, 0xbe, 0x50, 0x38, 0x78, 0x03, 0x02, 0x66, 0x16, 0x02, 0x65, 0xfb, - 0x75, 0x31, 0x99, 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, - 0x30, 0x3a, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x12, 0x22, - 0x80, 0x7d, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x9e, 0x44, 0x05, 0xe3, 0x9d, 0x24, 0x7e, 0x64, - 0x02, 0x00, 0x2e, 0x67, 0x01, 0xc3, 0x9e, 0x24, 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, - 0x35, 0x12, 0x65, 0xfb, 0x7e, 0x34, 0x01, 0xe3, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xdf, - 0x02, 0x65, 0xfb, 0x7a, 0x39, 0xc0, 0x7e, 0x34, 0x01, 0xe3, 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, - 0x44, 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, 0x54, 0x0f, 0x23, 0x23, 0x23, 0x44, 0x02, 0x7a, 0x69, - 0xb0, 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, 0x31, 0x93, 0x12, 0x7c, 0x15, 0x7a, 0x71, 0x31, 0x12, - 0x7c, 0x15, 0xbd, 0x04, 0x68, 0x29, 0x7a, 0x07, 0x01, 0xdf, 0x7e, 0x47, 0x01, 0xe1, 0x2d, 0x43, - 0x7a, 0x47, 0x01, 0xe1, 0x2e, 0x35, 0x46, 0x7a, 0x35, 0x46, 0x22, 0x09, 0xb1, 0x00, 0x14, 0x20, - 0xe0, 0x13, 0x22, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0x2a, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0x2c, 0x7e, - 0x04, 0x01, 0xe3, 0x80, 0xd1, 0xd2, 0x04, 0x7e, 0x07, 0x01, 0xe1, 0x7e, 0x24, 0x03, 0xfe, 0x9d, - 0x20, 0x28, 0x40, 0x7e, 0x07, 0x01, 0xdf, 0x7e, 0x44, 0x05, 0xe3, 0x7d, 0x60, 0x0b, 0x04, 0xbd, - 0x04, 0x68, 0xd0, 0x7d, 0x70, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xce, 0x7d, 0x54, 0x9d, 0x50, 0xbd, - 0x25, 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, - 0x01, 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, 0x7a, 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, - 0x02, 0x4e, 0x93, 0x75, 0x31, 0x99, 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, - 0xb1, 0x00, 0x04, 0x30, 0x3a, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, - 0xd2, 0x12, 0x22, 0xda, 0xb8, 0x30, 0xe0, 0xd8, 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, 0x12, 0x4e, - 0x93, 0xda, 0xb8, 0x02, 0x4f, 0xe0, 0x09, 0xb1, 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, 0x31, 0x90, - 0x12, 0x7c, 0x15, 0xf5, 0x31, 0x12, 0x7c, 0x15, 0xa5, 0xfc, 0x5e, 0xb0, 0xf0, 0xa5, 0xfd, 0x09, - 0xb1, 0x00, 0x18, 0x4c, 0x4b, 0x5e, 0xb0, 0xf0, 0xbc, 0xb5, 0x78, 0xf1, 0x5e, 0x40, 0x0f, 0x4c, - 0x54, 0x7c, 0xb5, 0x5e, 0x50, 0x0b, 0x68, 0x2a, 0xa5, 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, 0xd2, - 0x6a, 0x80, 0x02, 0xc2, 0x6a, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x62, 0x80, 0x02, - 0xc2, 0x62, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x5a, 0x80, 0x02, 0xc2, 0x5a, 0x12, - 0x43, 0x0a, 0x02, 0x62, 0x93, 0x75, 0x31, 0x91, 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x14, 0x7a, - 0xb1, 0x31, 0x12, 0x7c, 0x15, 0x20, 0xe0, 0x08, 0xd2, 0x04, 0x7e, 0xa0, 0x80, 0x02, 0x62, 0x93, - 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, 0x12, 0x62, 0x93, 0xca, 0xb8, 0x5e, 0xb0, 0x1c, - 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, 0x61, 0x00, 0x00, 0x12, 0x62, 0xb6, 0x09, 0xb1, - 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x4e, 0xe5, 0x75, 0x31, 0x95, 0x12, 0x7c, 0x15, 0x22, - 0x75, 0x31, 0x96, 0x12, 0x7c, 0x15, 0x22, 0x10, 0x0b, 0x01, 0x22, 0x20, 0x2b, 0x03, 0xd2, 0x0b, - 0x22, 0x75, 0x31, 0xa3, 0x12, 0x7c, 0x15, 0x7e, 0x14, 0x83, 0x00, 0x80, 0x06, 0x20, 0x2b, 0x03, - 0xd2, 0x0b, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x03, - 0x12, 0x53, 0x38, 0x20, 0xe6, 0x03, 0xd2, 0x0b, 0x22, 0x30, 0x33, 0x49, 0xd2, 0x73, 0x7e, 0x37, - 0x01, 0x95, 0x7e, 0x27, 0x01, 0xb5, 0x9d, 0x32, 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, 0x4e, 0x7a, - 0x05, 0x4e, 0x7a, 0x37, 0x01, 0x95, 0x7e, 0x37, 0x01, 0x75, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, - 0x19, 0xe2, 0x38, 0x68, 0x7a, 0x47, 0x01, 0x75, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, - 0x31, 0x12, 0x7c, 0x15, 0x12, 0x65, 0x2b, 0x10, 0x73, 0xc4, 0x22, 0xc2, 0x73, 0x2d, 0x23, 0x68, - 0x78, 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, 0x01, 0x95, 0xbe, 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, - 0x27, 0x01, 0xb5, 0x28, 0x04, 0x7e, 0x27, 0x01, 0xb5, 0x7e, 0x37, 0x01, 0x95, 0x9d, 0x32, 0x7d, - 0x02, 0x2e, 0x05, 0x4e, 0x7a, 0x05, 0x4e, 0x7a, 0x37, 0x01, 0x95, 0x7e, 0x37, 0x01, 0x75, 0x7d, - 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x19, 0xe2, 0x38, 0x13, 0x7a, 0x47, 0x01, 0x75, 0x75, 0x31, 0x94, - 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x02, 0x65, 0x2b, 0x75, 0x31, 0x94, 0x12, - 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x9e, 0x44, 0x19, 0xe3, 0x9d, 0x24, 0x12, 0x65, - 0x2b, 0x7e, 0x34, 0x15, 0xe3, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0x75, 0x12, 0x65, 0x2b, - 0xbe, 0x25, 0x20, 0x78, 0x03, 0x02, 0x50, 0x87, 0x22, 0xd2, 0x0b, 0x7e, 0x04, 0x15, 0xe3, 0x7a, - 0x07, 0x01, 0x75, 0x7a, 0x07, 0x01, 0x85, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x75, 0x31, 0x00, - 0x12, 0x7c, 0x15, 0x22, 0x75, 0x31, 0x92, 0x12, 0x7c, 0x15, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, - 0xca, 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, 0x70, 0x7e, 0x37, 0x01, 0xe1, 0x7e, 0x27, 0x01, 0xc5, - 0x2e, 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, 0x34, 0x04, 0x00, 0x38, 0x3c, 0x7d, 0x02, 0x2e, 0x05, - 0x46, 0x7a, 0x05, 0x46, 0x7a, 0x37, 0x01, 0xe1, 0x7e, 0x37, 0x01, 0xdf, 0x7d, 0x43, 0x2d, 0x42, - 0xbe, 0x44, 0x05, 0xe2, 0x38, 0x44, 0x7a, 0x47, 0x01, 0xdf, 0x7e, 0x24, 0x03, 0x00, 0x2e, 0x27, - 0x01, 0xc5, 0x1b, 0x38, 0x20, 0x0b, 0x35, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0xbe, 0x50, 0x38, - 0x78, 0x03, 0x02, 0x66, 0x16, 0x02, 0x65, 0xfb, 0x75, 0x31, 0x99, 0x12, 0x7c, 0x15, 0x09, 0xb1, - 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3b, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, - 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x13, 0x22, 0x80, 0x7d, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, - 0x9e, 0x44, 0x05, 0xe3, 0x9d, 0x24, 0x7e, 0x64, 0x03, 0x00, 0x2e, 0x67, 0x01, 0xc5, 0x9e, 0x24, - 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, 0x35, 0x12, 0x65, 0xfb, 0x7e, 0x34, 0x01, 0xe3, - 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xdf, 0x02, 0x65, 0xfb, 0x7a, 0x39, 0xc0, 0x7e, 0x34, - 0x01, 0xe3, 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, 0x44, 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, 0x54, - 0x0f, 0x23, 0x23, 0x23, 0x44, 0x03, 0x7a, 0x69, 0xb0, 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, 0x31, - 0x93, 0x12, 0x7c, 0x15, 0x7a, 0x71, 0x31, 0x12, 0x7c, 0x15, 0xbd, 0x04, 0x68, 0x29, 0x7a, 0x07, - 0x01, 0xdf, 0x7e, 0x47, 0x01, 0xe1, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xe1, 0x2e, 0x35, 0x46, 0x7a, - 0x35, 0x46, 0x22, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0x13, 0x22, 0x7e, 0x04, 0x01, 0xe3, 0x80, - 0x2a, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0x2c, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0xd1, 0xd2, 0x04, 0x7e, - 0x07, 0x01, 0xe1, 0x7e, 0x24, 0x03, 0xfe, 0x9d, 0x20, 0x28, 0x40, 0x7e, 0x07, 0x01, 0xdf, 0x7e, - 0x44, 0x05, 0xe3, 0x7d, 0x60, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd0, 0x7d, 0x70, 0x0b, 0x04, 0xbd, - 0x04, 0x68, 0xce, 0x7d, 0x54, 0x9d, 0x50, 0xbd, 0x25, 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, 0x09, - 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, 0x01, 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, 0x7a, - 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, 0x02, 0x51, 0xeb, 0x75, 0x31, 0x99, 0x12, 0x7c, - 0x15, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3b, 0x0a, 0x09, 0xb1, - 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x13, 0x22, 0xda, 0xb8, 0x30, 0xe0, 0xd8, - 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, 0x12, 0x51, 0xeb, 0xda, 0xb8, 0x02, 0x53, 0x38, 0x09, 0xb1, - 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, 0x31, 0x90, 0x12, 0x7c, 0x15, 0xf5, 0x31, 0x12, 0x7c, 0x15, - 0xa5, 0xfc, 0x5e, 0xb0, 0xf0, 0xa5, 0xfd, 0x09, 0xb1, 0x00, 0x18, 0x4c, 0x4b, 0x5e, 0xb0, 0xf0, - 0xbc, 0xb5, 0x78, 0xf1, 0x5e, 0x40, 0x0f, 0x4c, 0x54, 0x7c, 0xb5, 0x5e, 0x50, 0x0b, 0x68, 0x2a, - 0xa5, 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, 0xd2, 0x6b, 0x80, 0x02, 0xc2, 0x6b, 0xa5, 0xfd, 0x5e, - 0x50, 0x20, 0x68, 0x04, 0xd2, 0x63, 0x80, 0x02, 0xc2, 0x63, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, - 0x04, 0xd2, 0x5b, 0x80, 0x02, 0xc2, 0x5b, 0x12, 0x43, 0x2b, 0x02, 0x62, 0x93, 0x75, 0x31, 0x91, - 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x14, 0x7a, 0xb1, 0x31, 0x12, 0x7c, 0x15, 0x20, 0xe0, 0x08, - 0xd2, 0x04, 0x7e, 0xa0, 0x80, 0x02, 0x62, 0x93, 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, - 0x12, 0x62, 0x93, 0xca, 0xb8, 0x5e, 0xb0, 0x1c, 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, - 0x61, 0x00, 0x00, 0x12, 0x62, 0xb6, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x52, - 0x3d, 0x75, 0x31, 0x95, 0x12, 0x7c, 0x15, 0x22, 0x75, 0x31, 0x96, 0x12, 0x7c, 0x15, 0x22, 0x10, - 0x0c, 0x01, 0x22, 0x20, 0x2c, 0x03, 0xd2, 0x0c, 0x22, 0x75, 0x31, 0xa4, 0x12, 0x7c, 0x15, 0x7e, - 0x14, 0x84, 0x00, 0x80, 0x06, 0x20, 0x2c, 0x03, 0xd2, 0x0c, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, - 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x03, 0x12, 0x56, 0x90, 0x20, 0xe6, 0x03, 0xd2, 0x0c, - 0x22, 0x30, 0x34, 0x49, 0xd2, 0x74, 0x7e, 0x37, 0x01, 0x97, 0x7e, 0x27, 0x01, 0xb7, 0x9d, 0x32, - 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, 0x50, 0x7a, 0x05, 0x50, 0x7a, 0x37, 0x01, 0x97, 0x7e, 0x37, - 0x01, 0x77, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x1d, 0xe2, 0x38, 0x68, 0x7a, 0x47, 0x01, 0x77, - 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x12, 0x65, 0x2b, 0x10, - 0x74, 0xc4, 0x22, 0xc2, 0x74, 0x2d, 0x23, 0x68, 0x78, 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, 0x01, - 0x97, 0xbe, 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, 0x27, 0x01, 0xb7, 0x28, 0x04, 0x7e, 0x27, 0x01, - 0xb7, 0x7e, 0x37, 0x01, 0x97, 0x9d, 0x32, 0x7d, 0x02, 0x2e, 0x05, 0x50, 0x7a, 0x05, 0x50, 0x7a, - 0x37, 0x01, 0x97, 0x7e, 0x37, 0x01, 0x77, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x1d, 0xe2, 0x38, - 0x13, 0x7a, 0x47, 0x01, 0x77, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, - 0x15, 0x02, 0x65, 0x2b, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, - 0x9e, 0x44, 0x1d, 0xe3, 0x9d, 0x24, 0x12, 0x65, 0x2b, 0x7e, 0x34, 0x19, 0xe3, 0x7d, 0x24, 0x2d, - 0x43, 0x7a, 0x47, 0x01, 0x77, 0x12, 0x65, 0x2b, 0xbe, 0x25, 0x20, 0x78, 0x03, 0x02, 0x53, 0xdf, - 0x22, 0xd2, 0x0c, 0x7e, 0x04, 0x19, 0xe3, 0x7a, 0x07, 0x01, 0x77, 0x7a, 0x07, 0x01, 0x87, 0x75, - 0x31, 0x94, 0x12, 0x7c, 0x15, 0x75, 0x31, 0x00, 0x12, 0x7c, 0x15, 0x22, 0x75, 0x31, 0x92, 0x12, - 0x7c, 0x15, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, 0x70, - 0x7e, 0x37, 0x01, 0xe1, 0x7e, 0x27, 0x01, 0xc7, 0x2e, 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, 0x34, - 0x04, 0x00, 0x38, 0x3c, 0x7d, 0x02, 0x2e, 0x05, 0x46, 0x7a, 0x05, 0x46, 0x7a, 0x37, 0x01, 0xe1, - 0x7e, 0x37, 0x01, 0xdf, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x05, 0xe2, 0x38, 0x44, 0x7a, 0x47, - 0x01, 0xdf, 0x7e, 0x24, 0x04, 0x00, 0x2e, 0x27, 0x01, 0xc7, 0x1b, 0x38, 0x20, 0x0b, 0x35, 0x7a, - 0x51, 0x31, 0x12, 0x7c, 0x15, 0xbe, 0x50, 0x38, 0x78, 0x03, 0x02, 0x66, 0x16, 0x02, 0x65, 0xfb, - 0x75, 0x31, 0x99, 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, - 0x30, 0x3c, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x14, 0x22, - 0x80, 0x7d, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x9e, 0x44, 0x05, 0xe3, 0x9d, 0x24, 0x7e, 0x64, - 0x04, 0x00, 0x2e, 0x67, 0x01, 0xc7, 0x9e, 0x24, 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, - 0x35, 0x12, 0x65, 0xfb, 0x7e, 0x34, 0x01, 0xe3, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xdf, - 0x02, 0x65, 0xfb, 0x7a, 0x39, 0xc0, 0x7e, 0x34, 0x01, 0xe3, 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, - 0x44, 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, 0x54, 0x0f, 0x23, 0x23, 0x23, 0x44, 0x04, 0x7a, 0x69, - 0xb0, 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, 0x31, 0x93, 0x12, 0x7c, 0x15, 0x7a, 0x71, 0x31, 0x12, - 0x7c, 0x15, 0xbd, 0x04, 0x68, 0x29, 0x7a, 0x07, 0x01, 0xdf, 0x7e, 0x47, 0x01, 0xe1, 0x2d, 0x43, - 0x7a, 0x47, 0x01, 0xe1, 0x2e, 0x35, 0x46, 0x7a, 0x35, 0x46, 0x22, 0x09, 0xb1, 0x00, 0x14, 0x20, - 0xe0, 0x13, 0x22, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0x2a, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0x2c, 0x7e, - 0x04, 0x01, 0xe3, 0x80, 0xd1, 0xd2, 0x04, 0x7e, 0x07, 0x01, 0xe1, 0x7e, 0x24, 0x03, 0xfe, 0x9d, - 0x20, 0x28, 0x40, 0x7e, 0x07, 0x01, 0xdf, 0x7e, 0x44, 0x05, 0xe3, 0x7d, 0x60, 0x0b, 0x04, 0xbd, - 0x04, 0x68, 0xd0, 0x7d, 0x70, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xce, 0x7d, 0x54, 0x9d, 0x50, 0xbd, - 0x25, 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, - 0x01, 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, 0x7a, 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, - 0x02, 0x55, 0x43, 0x75, 0x31, 0x99, 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, - 0xb1, 0x00, 0x04, 0x30, 0x3c, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, - 0xd2, 0x14, 0x22, 0xda, 0xb8, 0x30, 0xe0, 0xd8, 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, 0x12, 0x55, - 0x43, 0xda, 0xb8, 0x02, 0x56, 0x90, 0x09, 0xb1, 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, 0x31, 0x90, - 0x12, 0x7c, 0x15, 0xf5, 0x31, 0x12, 0x7c, 0x15, 0xa5, 0xfc, 0x5e, 0xb0, 0xf0, 0xa5, 0xfd, 0x09, - 0xb1, 0x00, 0x18, 0x4c, 0x4b, 0x5e, 0xb0, 0xf0, 0xbc, 0xb5, 0x78, 0xf1, 0x5e, 0x40, 0x0f, 0x4c, - 0x54, 0x7c, 0xb5, 0x5e, 0x50, 0x0b, 0x68, 0x2a, 0xa5, 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, 0xd2, - 0x6c, 0x80, 0x02, 0xc2, 0x6c, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x64, 0x80, 0x02, - 0xc2, 0x64, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x5c, 0x80, 0x02, 0xc2, 0x5c, 0x12, - 0x43, 0x4c, 0x02, 0x62, 0x93, 0x75, 0x31, 0x91, 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x14, 0x7a, - 0xb1, 0x31, 0x12, 0x7c, 0x15, 0x20, 0xe0, 0x08, 0xd2, 0x04, 0x7e, 0xa0, 0x80, 0x02, 0x62, 0x93, - 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, 0x12, 0x62, 0x93, 0xca, 0xb8, 0x5e, 0xb0, 0x1c, - 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, 0x61, 0x00, 0x00, 0x12, 0x62, 0xb6, 0x09, 0xb1, - 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x55, 0x95, 0x75, 0x31, 0x95, 0x12, 0x7c, 0x15, 0x22, - 0x75, 0x31, 0x96, 0x12, 0x7c, 0x15, 0x22, 0x10, 0x0d, 0x01, 0x22, 0x20, 0x2d, 0x03, 0xd2, 0x0d, - 0x22, 0x75, 0x31, 0xa5, 0x12, 0x7c, 0x15, 0x7e, 0x14, 0x85, 0x00, 0x80, 0x06, 0x20, 0x2d, 0x03, - 0xd2, 0x0d, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x03, - 0x12, 0x59, 0xe8, 0x20, 0xe6, 0x03, 0xd2, 0x0d, 0x22, 0x30, 0x35, 0x49, 0xd2, 0x75, 0x7e, 0x37, - 0x01, 0x99, 0x7e, 0x27, 0x01, 0xb9, 0x9d, 0x32, 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, 0x52, 0x7a, - 0x05, 0x52, 0x7a, 0x37, 0x01, 0x99, 0x7e, 0x37, 0x01, 0x79, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, - 0x21, 0xe2, 0x38, 0x68, 0x7a, 0x47, 0x01, 0x79, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, - 0x31, 0x12, 0x7c, 0x15, 0x12, 0x65, 0x2b, 0x10, 0x75, 0xc4, 0x22, 0xc2, 0x75, 0x2d, 0x23, 0x68, - 0x78, 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, 0x01, 0x99, 0xbe, 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, - 0x27, 0x01, 0xb9, 0x28, 0x04, 0x7e, 0x27, 0x01, 0xb9, 0x7e, 0x37, 0x01, 0x99, 0x9d, 0x32, 0x7d, - 0x02, 0x2e, 0x05, 0x52, 0x7a, 0x05, 0x52, 0x7a, 0x37, 0x01, 0x99, 0x7e, 0x37, 0x01, 0x79, 0x7d, - 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x21, 0xe2, 0x38, 0x13, 0x7a, 0x47, 0x01, 0x79, 0x75, 0x31, 0x94, - 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x02, 0x65, 0x2b, 0x75, 0x31, 0x94, 0x12, - 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x9e, 0x44, 0x21, 0xe3, 0x9d, 0x24, 0x12, 0x65, - 0x2b, 0x7e, 0x34, 0x1d, 0xe3, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0x79, 0x12, 0x65, 0x2b, - 0xbe, 0x25, 0x20, 0x78, 0x03, 0x02, 0x57, 0x37, 0x22, 0xd2, 0x0d, 0x7e, 0x04, 0x1d, 0xe3, 0x7a, - 0x07, 0x01, 0x79, 0x7a, 0x07, 0x01, 0x89, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x75, 0x31, 0x00, - 0x12, 0x7c, 0x15, 0x22, 0x75, 0x31, 0x92, 0x12, 0x7c, 0x15, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, - 0xca, 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, 0x70, 0x7e, 0x37, 0x01, 0xe1, 0x7e, 0x27, 0x01, 0xc9, - 0x2e, 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, 0x34, 0x04, 0x00, 0x38, 0x3c, 0x7d, 0x02, 0x2e, 0x05, - 0x46, 0x7a, 0x05, 0x46, 0x7a, 0x37, 0x01, 0xe1, 0x7e, 0x37, 0x01, 0xdf, 0x7d, 0x43, 0x2d, 0x42, - 0xbe, 0x44, 0x05, 0xe2, 0x38, 0x44, 0x7a, 0x47, 0x01, 0xdf, 0x7e, 0x24, 0x05, 0x00, 0x2e, 0x27, - 0x01, 0xc9, 0x1b, 0x38, 0x20, 0x0b, 0x35, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0xbe, 0x50, 0x38, - 0x78, 0x03, 0x02, 0x66, 0x16, 0x02, 0x65, 0xfb, 0x75, 0x31, 0x99, 0x12, 0x7c, 0x15, 0x09, 0xb1, - 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3d, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, - 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x15, 0x22, 0x80, 0x7d, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, - 0x9e, 0x44, 0x05, 0xe3, 0x9d, 0x24, 0x7e, 0x64, 0x05, 0x00, 0x2e, 0x67, 0x01, 0xc9, 0x9e, 0x24, - 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, 0x35, 0x12, 0x65, 0xfb, 0x7e, 0x34, 0x01, 0xe3, - 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xdf, 0x02, 0x65, 0xfb, 0x7a, 0x39, 0xc0, 0x7e, 0x34, - 0x01, 0xe3, 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, 0x44, 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, 0x54, - 0x0f, 0x23, 0x23, 0x23, 0x44, 0x05, 0x7a, 0x69, 0xb0, 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, 0x31, - 0x93, 0x12, 0x7c, 0x15, 0x7a, 0x71, 0x31, 0x12, 0x7c, 0x15, 0xbd, 0x04, 0x68, 0x29, 0x7a, 0x07, - 0x01, 0xdf, 0x7e, 0x47, 0x01, 0xe1, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xe1, 0x2e, 0x35, 0x46, 0x7a, - 0x35, 0x46, 0x22, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0x13, 0x22, 0x7e, 0x04, 0x01, 0xe3, 0x80, - 0x2a, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0x2c, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0xd1, 0xd2, 0x04, 0x7e, - 0x07, 0x01, 0xe1, 0x7e, 0x24, 0x03, 0xfe, 0x9d, 0x20, 0x28, 0x40, 0x7e, 0x07, 0x01, 0xdf, 0x7e, - 0x44, 0x05, 0xe3, 0x7d, 0x60, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd0, 0x7d, 0x70, 0x0b, 0x04, 0xbd, - 0x04, 0x68, 0xce, 0x7d, 0x54, 0x9d, 0x50, 0xbd, 0x25, 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, 0x09, - 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, 0x01, 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, 0x7a, - 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, 0x02, 0x58, 0x9b, 0x75, 0x31, 0x99, 0x12, 0x7c, - 0x15, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3d, 0x0a, 0x09, 0xb1, - 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x15, 0x22, 0xda, 0xb8, 0x30, 0xe0, 0xd8, - 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, 0x12, 0x58, 0x9b, 0xda, 0xb8, 0x02, 0x59, 0xe8, 0x09, 0xb1, - 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, 0x31, 0x90, 0x12, 0x7c, 0x15, 0xf5, 0x31, 0x12, 0x7c, 0x15, - 0xa5, 0xfc, 0x5e, 0xb0, 0xf0, 0xa5, 0xfd, 0x09, 0xb1, 0x00, 0x18, 0x4c, 0x4b, 0x5e, 0xb0, 0xf0, - 0xbc, 0xb5, 0x78, 0xf1, 0x5e, 0x40, 0x0f, 0x4c, 0x54, 0x7c, 0xb5, 0x5e, 0x50, 0x0b, 0x68, 0x2a, - 0xa5, 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, 0xd2, 0x6d, 0x80, 0x02, 0xc2, 0x6d, 0xa5, 0xfd, 0x5e, - 0x50, 0x20, 0x68, 0x04, 0xd2, 0x65, 0x80, 0x02, 0xc2, 0x65, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, - 0x04, 0xd2, 0x5d, 0x80, 0x02, 0xc2, 0x5d, 0x12, 0x43, 0x6d, 0x02, 0x62, 0x93, 0x75, 0x31, 0x91, - 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x14, 0x7a, 0xb1, 0x31, 0x12, 0x7c, 0x15, 0x20, 0xe0, 0x08, - 0xd2, 0x04, 0x7e, 0xa0, 0x80, 0x02, 0x62, 0x93, 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, - 0x12, 0x62, 0x93, 0xca, 0xb8, 0x5e, 0xb0, 0x1c, 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, - 0x61, 0x00, 0x00, 0x12, 0x62, 0xb6, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x58, - 0xed, 0x75, 0x31, 0x95, 0x12, 0x7c, 0x15, 0x22, 0x75, 0x31, 0x96, 0x12, 0x7c, 0x15, 0x22, 0x10, - 0x0e, 0x01, 0x22, 0x20, 0x2e, 0x03, 0xd2, 0x0e, 0x22, 0x75, 0x31, 0xa6, 0x12, 0x7c, 0x15, 0x7e, - 0x14, 0x86, 0x00, 0x80, 0x06, 0x20, 0x2e, 0x03, 0xd2, 0x0e, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, - 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x03, 0x12, 0x5d, 0x40, 0x20, 0xe6, 0x03, 0xd2, 0x0e, - 0x22, 0x30, 0x36, 0x49, 0xd2, 0x76, 0x7e, 0x37, 0x01, 0x9b, 0x7e, 0x27, 0x01, 0xbb, 0x9d, 0x32, - 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, 0x54, 0x7a, 0x05, 0x54, 0x7a, 0x37, 0x01, 0x9b, 0x7e, 0x37, - 0x01, 0x7b, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x25, 0xe2, 0x38, 0x68, 0x7a, 0x47, 0x01, 0x7b, - 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x12, 0x65, 0x2b, 0x10, - 0x76, 0xc4, 0x22, 0xc2, 0x76, 0x2d, 0x23, 0x68, 0x78, 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, 0x01, - 0x9b, 0xbe, 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, 0x27, 0x01, 0xbb, 0x28, 0x04, 0x7e, 0x27, 0x01, - 0xbb, 0x7e, 0x37, 0x01, 0x9b, 0x9d, 0x32, 0x7d, 0x02, 0x2e, 0x05, 0x54, 0x7a, 0x05, 0x54, 0x7a, - 0x37, 0x01, 0x9b, 0x7e, 0x37, 0x01, 0x7b, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x25, 0xe2, 0x38, - 0x13, 0x7a, 0x47, 0x01, 0x7b, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, - 0x15, 0x02, 0x65, 0x2b, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, - 0x9e, 0x44, 0x25, 0xe3, 0x9d, 0x24, 0x12, 0x65, 0x2b, 0x7e, 0x34, 0x21, 0xe3, 0x7d, 0x24, 0x2d, - 0x43, 0x7a, 0x47, 0x01, 0x7b, 0x12, 0x65, 0x2b, 0xbe, 0x25, 0x20, 0x78, 0x03, 0x02, 0x5a, 0x8f, - 0x22, 0xd2, 0x0e, 0x7e, 0x04, 0x21, 0xe3, 0x7a, 0x07, 0x01, 0x7b, 0x7a, 0x07, 0x01, 0x8b, 0x75, - 0x31, 0x94, 0x12, 0x7c, 0x15, 0x75, 0x31, 0x00, 0x12, 0x7c, 0x15, 0x22, 0x75, 0x31, 0x92, 0x12, - 0x7c, 0x15, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, 0x70, - 0x7e, 0x37, 0x01, 0xe1, 0x7e, 0x27, 0x01, 0xcb, 0x2e, 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, 0x34, - 0x04, 0x00, 0x38, 0x3c, 0x7d, 0x02, 0x2e, 0x05, 0x46, 0x7a, 0x05, 0x46, 0x7a, 0x37, 0x01, 0xe1, - 0x7e, 0x37, 0x01, 0xdf, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x05, 0xe2, 0x38, 0x44, 0x7a, 0x47, - 0x01, 0xdf, 0x7e, 0x24, 0x06, 0x00, 0x2e, 0x27, 0x01, 0xcb, 0x1b, 0x38, 0x20, 0x0b, 0x35, 0x7a, - 0x51, 0x31, 0x12, 0x7c, 0x15, 0xbe, 0x50, 0x38, 0x78, 0x03, 0x02, 0x66, 0x16, 0x02, 0x65, 0xfb, - 0x75, 0x31, 0x99, 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, - 0x30, 0x3e, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x16, 0x22, - 0x80, 0x7d, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x9e, 0x44, 0x05, 0xe3, 0x9d, 0x24, 0x7e, 0x64, - 0x06, 0x00, 0x2e, 0x67, 0x01, 0xcb, 0x9e, 0x24, 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, - 0x35, 0x12, 0x65, 0xfb, 0x7e, 0x34, 0x01, 0xe3, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xdf, - 0x02, 0x65, 0xfb, 0x7a, 0x39, 0xc0, 0x7e, 0x34, 0x01, 0xe3, 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, - 0x44, 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, 0x54, 0x0f, 0x23, 0x23, 0x23, 0x44, 0x06, 0x7a, 0x69, - 0xb0, 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, 0x31, 0x93, 0x12, 0x7c, 0x15, 0x7a, 0x71, 0x31, 0x12, - 0x7c, 0x15, 0xbd, 0x04, 0x68, 0x29, 0x7a, 0x07, 0x01, 0xdf, 0x7e, 0x47, 0x01, 0xe1, 0x2d, 0x43, - 0x7a, 0x47, 0x01, 0xe1, 0x2e, 0x35, 0x46, 0x7a, 0x35, 0x46, 0x22, 0x09, 0xb1, 0x00, 0x14, 0x20, - 0xe0, 0x13, 0x22, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0x2a, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0x2c, 0x7e, - 0x04, 0x01, 0xe3, 0x80, 0xd1, 0xd2, 0x04, 0x7e, 0x07, 0x01, 0xe1, 0x7e, 0x24, 0x03, 0xfe, 0x9d, - 0x20, 0x28, 0x40, 0x7e, 0x07, 0x01, 0xdf, 0x7e, 0x44, 0x05, 0xe3, 0x7d, 0x60, 0x0b, 0x04, 0xbd, - 0x04, 0x68, 0xd0, 0x7d, 0x70, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xce, 0x7d, 0x54, 0x9d, 0x50, 0xbd, - 0x25, 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, - 0x01, 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, 0x7a, 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, - 0x02, 0x5b, 0xf3, 0x75, 0x31, 0x99, 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, - 0xb1, 0x00, 0x04, 0x30, 0x3e, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, - 0xd2, 0x16, 0x22, 0xda, 0xb8, 0x30, 0xe0, 0xd8, 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, 0x12, 0x5b, - 0xf3, 0xda, 0xb8, 0x02, 0x5d, 0x40, 0x09, 0xb1, 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, 0x31, 0x90, - 0x12, 0x7c, 0x15, 0xf5, 0x31, 0x12, 0x7c, 0x15, 0xa5, 0xfc, 0x5e, 0xb0, 0xf0, 0xa5, 0xfd, 0x09, - 0xb1, 0x00, 0x18, 0x4c, 0x4b, 0x5e, 0xb0, 0xf0, 0xbc, 0xb5, 0x78, 0xf1, 0x5e, 0x40, 0x0f, 0x4c, - 0x54, 0x7c, 0xb5, 0x5e, 0x50, 0x0b, 0x68, 0x2a, 0xa5, 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, 0xd2, - 0x6e, 0x80, 0x02, 0xc2, 0x6e, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x66, 0x80, 0x02, - 0xc2, 0x66, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x5e, 0x80, 0x02, 0xc2, 0x5e, 0x12, - 0x43, 0x8e, 0x02, 0x62, 0x93, 0x75, 0x31, 0x91, 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x14, 0x7a, - 0xb1, 0x31, 0x12, 0x7c, 0x15, 0x20, 0xe0, 0x08, 0xd2, 0x04, 0x7e, 0xa0, 0x80, 0x02, 0x62, 0x93, - 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, 0x12, 0x62, 0x93, 0xca, 0xb8, 0x5e, 0xb0, 0x1c, - 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, 0x61, 0x00, 0x00, 0x12, 0x62, 0xb6, 0x09, 0xb1, - 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x5c, 0x45, 0x75, 0x31, 0x95, 0x12, 0x7c, 0x15, 0x22, - 0x75, 0x31, 0x96, 0x12, 0x7c, 0x15, 0x22, 0x10, 0x0f, 0x01, 0x22, 0x20, 0x2f, 0x03, 0xd2, 0x0f, - 0x22, 0x75, 0x31, 0xa7, 0x12, 0x7c, 0x15, 0x7e, 0x14, 0x87, 0x00, 0x80, 0x06, 0x20, 0x2f, 0x03, - 0xd2, 0x0f, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x03, - 0x12, 0x60, 0x98, 0x20, 0xe6, 0x03, 0xd2, 0x0f, 0x22, 0x30, 0x37, 0x49, 0xd2, 0x77, 0x7e, 0x37, - 0x01, 0x9d, 0x7e, 0x27, 0x01, 0xbd, 0x9d, 0x32, 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, 0x56, 0x7a, - 0x05, 0x56, 0x7a, 0x37, 0x01, 0x9d, 0x7e, 0x37, 0x01, 0x7d, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, - 0x29, 0xe2, 0x38, 0x68, 0x7a, 0x47, 0x01, 0x7d, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x7a, 0x51, - 0x31, 0x12, 0x7c, 0x15, 0x12, 0x65, 0x2b, 0x10, 0x77, 0xc4, 0x22, 0xc2, 0x77, 0x2d, 0x23, 0x68, - 0x78, 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, 0x01, 0x9d, 0xbe, 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, - 0x27, 0x01, 0xbd, 0x28, 0x04, 0x7e, 0x27, 0x01, 0xbd, 0x7e, 0x37, 0x01, 0x9d, 0x9d, 0x32, 0x7d, - 0x02, 0x2e, 0x05, 0x56, 0x7a, 0x05, 0x56, 0x7a, 0x37, 0x01, 0x9d, 0x7e, 0x37, 0x01, 0x7d, 0x7d, - 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x29, 0xe2, 0x38, 0x13, 0x7a, 0x47, 0x01, 0x7d, 0x75, 0x31, 0x94, - 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x02, 0x65, 0x2b, 0x75, 0x31, 0x94, 0x12, - 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x9e, 0x44, 0x29, 0xe3, 0x9d, 0x24, 0x12, 0x65, - 0x2b, 0x7e, 0x34, 0x25, 0xe3, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0x7d, 0x12, 0x65, 0x2b, - 0xbe, 0x25, 0x20, 0x78, 0x03, 0x02, 0x5d, 0xe7, 0x22, 0xd2, 0x0f, 0x7e, 0x04, 0x25, 0xe3, 0x7a, - 0x07, 0x01, 0x7d, 0x7a, 0x07, 0x01, 0x8d, 0x75, 0x31, 0x94, 0x12, 0x7c, 0x15, 0x75, 0x31, 0x00, - 0x12, 0x7c, 0x15, 0x22, 0x75, 0x31, 0x92, 0x12, 0x7c, 0x15, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, - 0xca, 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, 0x70, 0x7e, 0x37, 0x01, 0xe1, 0x7e, 0x27, 0x01, 0xcd, - 0x2e, 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, 0x34, 0x04, 0x00, 0x38, 0x3c, 0x7d, 0x02, 0x2e, 0x05, - 0x46, 0x7a, 0x05, 0x46, 0x7a, 0x37, 0x01, 0xe1, 0x7e, 0x37, 0x01, 0xdf, 0x7d, 0x43, 0x2d, 0x42, - 0xbe, 0x44, 0x05, 0xe2, 0x38, 0x44, 0x7a, 0x47, 0x01, 0xdf, 0x7e, 0x24, 0x07, 0x00, 0x2e, 0x27, - 0x01, 0xcd, 0x1b, 0x38, 0x20, 0x0b, 0x35, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0xbe, 0x50, 0x38, - 0x78, 0x03, 0x02, 0x66, 0x16, 0x02, 0x65, 0xfb, 0x75, 0x31, 0x99, 0x12, 0x7c, 0x15, 0x09, 0xb1, - 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3f, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, - 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x17, 0x22, 0x80, 0x7d, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, - 0x9e, 0x44, 0x05, 0xe3, 0x9d, 0x24, 0x7e, 0x64, 0x07, 0x00, 0x2e, 0x67, 0x01, 0xcd, 0x9e, 0x24, - 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, 0x35, 0x12, 0x65, 0xfb, 0x7e, 0x34, 0x01, 0xe3, - 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xdf, 0x02, 0x65, 0xfb, 0x7a, 0x39, 0xc0, 0x7e, 0x34, - 0x01, 0xe3, 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, 0x44, 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, 0x54, - 0x0f, 0x23, 0x23, 0x23, 0x44, 0x07, 0x7a, 0x69, 0xb0, 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, 0x31, - 0x93, 0x12, 0x7c, 0x15, 0x7a, 0x71, 0x31, 0x12, 0x7c, 0x15, 0xbd, 0x04, 0x68, 0x29, 0x7a, 0x07, - 0x01, 0xdf, 0x7e, 0x47, 0x01, 0xe1, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xe1, 0x2e, 0x35, 0x46, 0x7a, - 0x35, 0x46, 0x22, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0x13, 0x22, 0x7e, 0x04, 0x01, 0xe3, 0x80, - 0x2a, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0x2c, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0xd1, 0xd2, 0x04, 0x7e, - 0x07, 0x01, 0xe1, 0x7e, 0x24, 0x03, 0xfe, 0x9d, 0x20, 0x28, 0x40, 0x7e, 0x07, 0x01, 0xdf, 0x7e, - 0x44, 0x05, 0xe3, 0x7d, 0x60, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd0, 0x7d, 0x70, 0x0b, 0x04, 0xbd, - 0x04, 0x68, 0xce, 0x7d, 0x54, 0x9d, 0x50, 0xbd, 0x25, 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, 0x09, - 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, 0x01, 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, 0x7a, - 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, 0x02, 0x5f, 0x4b, 0x75, 0x31, 0x99, 0x12, 0x7c, - 0x15, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3f, 0x0a, 0x09, 0xb1, - 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x17, 0x22, 0xda, 0xb8, 0x30, 0xe0, 0xd8, - 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, 0x12, 0x5f, 0x4b, 0xda, 0xb8, 0x02, 0x60, 0x98, 0x09, 0xb1, - 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, 0x31, 0x90, 0x12, 0x7c, 0x15, 0xf5, 0x31, 0x12, 0x7c, 0x15, - 0xa5, 0xfc, 0x5e, 0xb0, 0xf0, 0xa5, 0xfd, 0x09, 0xb1, 0x00, 0x18, 0x4c, 0x4b, 0x5e, 0xb0, 0xf0, - 0xbc, 0xb5, 0x78, 0xf1, 0x5e, 0x40, 0x0f, 0x4c, 0x54, 0x7c, 0xb5, 0x5e, 0x50, 0x0b, 0x68, 0x2a, - 0xa5, 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, 0xd2, 0x6f, 0x80, 0x02, 0xc2, 0x6f, 0xa5, 0xfd, 0x5e, - 0x50, 0x20, 0x68, 0x04, 0xd2, 0x67, 0x80, 0x02, 0xc2, 0x67, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, - 0x04, 0xd2, 0x5f, 0x80, 0x02, 0xc2, 0x5f, 0x12, 0x43, 0xaf, 0x02, 0x62, 0x93, 0x75, 0x31, 0x91, - 0x12, 0x7c, 0x15, 0x09, 0xb1, 0x00, 0x14, 0x7a, 0xb1, 0x31, 0x12, 0x7c, 0x15, 0x20, 0xe0, 0x08, - 0xd2, 0x04, 0x7e, 0xa0, 0x80, 0x02, 0x62, 0x93, 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, - 0x12, 0x62, 0x93, 0xca, 0xb8, 0x5e, 0xb0, 0x1c, 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, - 0x61, 0x00, 0x00, 0x12, 0x62, 0xb6, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x5f, - 0x9d, 0x75, 0x31, 0x95, 0x12, 0x7c, 0x15, 0x22, 0x75, 0x31, 0x96, 0x12, 0x7c, 0x15, 0x22, 0x7c, - 0x02, 0x7e, 0x14, 0x80, 0x00, 0x4c, 0x20, 0x09, 0xb1, 0x00, 0x18, 0xa5, 0xfd, 0x5e, 0x50, 0x10, - 0x68, 0x04, 0xd2, 0x68, 0x80, 0x02, 0xc2, 0x68, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, - 0x60, 0x80, 0x02, 0xc2, 0x60, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x58, 0x80, 0x02, - 0xc2, 0x58, 0x02, 0x62, 0x7f, 0x7c, 0x02, 0x7e, 0x14, 0x80, 0x00, 0x4c, 0x20, 0x09, 0xb1, 0x00, - 0x18, 0xa5, 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, 0xd2, 0x69, 0x80, 0x02, 0xc2, 0x69, 0xa5, 0xfd, - 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x61, 0x80, 0x02, 0xc2, 0x61, 0xa5, 0xfd, 0x5e, 0x50, 0x80, - 0x68, 0x04, 0xd2, 0x59, 0x80, 0x02, 0xc2, 0x59, 0x02, 0x62, 0x7f, 0x7c, 0x02, 0x7e, 0x14, 0x80, - 0x00, 0x4c, 0x20, 0x09, 0xb1, 0x00, 0x18, 0xa5, 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, 0xd2, 0x6a, - 0x80, 0x02, 0xc2, 0x6a, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x62, 0x80, 0x02, 0xc2, - 0x62, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x5a, 0x80, 0x02, 0xc2, 0x5a, 0x02, 0x62, - 0x7f, 0x7c, 0x02, 0x7e, 0x14, 0x80, 0x00, 0x4c, 0x20, 0x09, 0xb1, 0x00, 0x18, 0xa5, 0xfd, 0x5e, - 0x50, 0x10, 0x68, 0x04, 0xd2, 0x6b, 0x80, 0x02, 0xc2, 0x6b, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, - 0x04, 0xd2, 0x63, 0x80, 0x02, 0xc2, 0x63, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x5b, - 0x80, 0x02, 0xc2, 0x5b, 0x02, 0x62, 0x7f, 0x7c, 0x02, 0x7e, 0x14, 0x80, 0x00, 0x4c, 0x20, 0x09, - 0xb1, 0x00, 0x18, 0xa5, 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, 0xd2, 0x6c, 0x80, 0x02, 0xc2, 0x6c, - 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x64, 0x80, 0x02, 0xc2, 0x64, 0xa5, 0xfd, 0x5e, - 0x50, 0x80, 0x68, 0x04, 0xd2, 0x5c, 0x80, 0x02, 0xc2, 0x5c, 0x02, 0x62, 0x7f, 0x7c, 0x02, 0x7e, - 0x14, 0x80, 0x00, 0x4c, 0x20, 0x09, 0xb1, 0x00, 0x18, 0xa5, 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, - 0xd2, 0x6d, 0x80, 0x02, 0xc2, 0x6d, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x65, 0x80, - 0x02, 0xc2, 0x65, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x5d, 0x80, 0x02, 0xc2, 0x5d, - 0x02, 0x62, 0x7f, 0x7c, 0x02, 0x7e, 0x14, 0x80, 0x00, 0x4c, 0x20, 0x09, 0xb1, 0x00, 0x18, 0xa5, - 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, 0xd2, 0x6e, 0x80, 0x02, 0xc2, 0x6e, 0xa5, 0xfd, 0x5e, 0x50, - 0x20, 0x68, 0x04, 0xd2, 0x66, 0x80, 0x02, 0xc2, 0x66, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, - 0xd2, 0x5e, 0x80, 0x02, 0xc2, 0x5e, 0x02, 0x62, 0x7f, 0x7c, 0x02, 0x7e, 0x14, 0x80, 0x00, 0x4c, - 0x20, 0x09, 0xb1, 0x00, 0x18, 0xa5, 0xfd, 0x5e, 0x50, 0x10, 0x68, 0x04, 0xd2, 0x6f, 0x80, 0x02, - 0xc2, 0x6f, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x67, 0x80, 0x02, 0xc2, 0x67, 0xa5, - 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x5f, 0x80, 0x02, 0xc2, 0x5f, 0x02, 0x62, 0x7f, 0x54, - 0xf0, 0xc4, 0xa5, 0xff, 0xc4, 0xa5, 0x4f, 0x75, 0x31, 0x90, 0x12, 0x7c, 0x15, 0xf5, 0x31, 0x12, - 0x7c, 0x15, 0x22, 0xca, 0x19, 0x5e, 0x20, 0x07, 0x4c, 0xa2, 0x7e, 0x74, 0x29, 0xe3, 0xca, 0x79, - 0x7a, 0x79, 0xa0, 0x0b, 0x74, 0x7a, 0x79, 0xb0, 0x0b, 0x74, 0xda, 0x79, 0x7e, 0x30, 0x02, 0x7e, - 0x64, 0x00, 0x02, 0x02, 0x62, 0xde, 0xca, 0x19, 0x5e, 0x20, 0x07, 0x4c, 0xa2, 0x7e, 0x74, 0x29, - 0xe3, 0xca, 0x79, 0x7a, 0x79, 0xa0, 0x0b, 0x74, 0x7a, 0x79, 0xb0, 0x0b, 0x74, 0x7a, 0x79, 0x60, - 0x0b, 0x74, 0xda, 0x79, 0x7e, 0x30, 0x03, 0x7e, 0x64, 0x00, 0x03, 0x02, 0x62, 0xde, 0xd2, 0x04, - 0x7e, 0x27, 0x01, 0xe1, 0x2d, 0x26, 0xbe, 0x24, 0x04, 0x00, 0x38, 0x2e, 0x7e, 0x07, 0x01, 0xdf, - 0x7e, 0x44, 0x05, 0xe3, 0x7e, 0x79, 0xa0, 0x7a, 0x09, 0xa0, 0x0b, 0x04, 0x0b, 0x74, 0xbd, 0x04, - 0x68, 0x23, 0xa5, 0xdb, 0xef, 0x7a, 0x27, 0x01, 0xe1, 0x7e, 0x25, 0x46, 0x2d, 0x26, 0x7a, 0x25, - 0x46, 0x7a, 0x07, 0x01, 0xdf, 0xda, 0x19, 0xc2, 0xd7, 0x22, 0x75, 0x31, 0x9a, 0x12, 0x7c, 0x15, - 0xda, 0x19, 0xd2, 0xd7, 0x22, 0x7e, 0x04, 0x01, 0xe3, 0x80, 0xd7, 0x48, 0xb6, 0x46, 0x25, 0x47, - 0x1c, 0x49, 0x15, 0x44, 0xc6, 0x44, 0xc6, 0x48, 0x1b, 0x44, 0xc6, 0x49, 0x59, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x49, 0x60, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x4c, 0x0e, 0x49, 0x7d, 0x4a, - 0x74, 0x4c, 0x6d, 0x44, 0xc6, 0x44, 0xc6, 0x4b, 0x73, 0x44, 0xc6, 0x4c, 0xb1, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x4c, 0xb8, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x4f, 0x66, 0x4c, 0xd5, 0x4d, - 0xcc, 0x4f, 0xc5, 0x44, 0xc6, 0x44, 0xc6, 0x4e, 0xcb, 0x44, 0xc6, 0x50, 0x09, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x50, 0x10, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x52, 0xbe, 0x50, 0x2d, 0x51, - 0x24, 0x53, 0x1d, 0x44, 0xc6, 0x44, 0xc6, 0x52, 0x23, 0x44, 0xc6, 0x53, 0x61, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x53, 0x68, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x56, 0x16, 0x53, 0x85, 0x54, - 0x7c, 0x56, 0x75, 0x44, 0xc6, 0x44, 0xc6, 0x55, 0x7b, 0x44, 0xc6, 0x56, 0xb9, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x56, 0xc0, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x59, 0x6e, 0x56, 0xdd, 0x57, - 0xd4, 0x59, 0xcd, 0x44, 0xc6, 0x44, 0xc6, 0x58, 0xd3, 0x44, 0xc6, 0x5a, 0x11, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x5a, 0x18, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x5c, 0xc6, 0x5a, 0x35, 0x5b, - 0x2c, 0x5d, 0x25, 0x44, 0xc6, 0x44, 0xc6, 0x5c, 0x2b, 0x44, 0xc6, 0x5d, 0x69, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x5d, 0x70, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x60, 0x1e, 0x5d, 0x8d, 0x5e, - 0x84, 0x60, 0x7d, 0x44, 0xc6, 0x44, 0xc6, 0x5f, 0x83, 0x44, 0xc6, 0x60, 0xc1, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x60, 0xc8, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, - 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0x44, 0xc6, 0xca, 0x29, 0x1e, 0x50, 0x40, - 0x0d, 0x7e, 0x54, 0x0b, 0x10, 0x9c, 0xb5, 0xa4, 0x2e, 0x54, 0x65, 0x48, 0x89, 0x54, 0x7e, 0x39, - 0x00, 0x7a, 0x19, 0x00, 0x0b, 0x34, 0x80, 0xe9, 0x0b, 0x38, 0x00, 0x7a, 0x19, 0x00, 0x7a, 0x19, - 0x10, 0x0b, 0x35, 0x0b, 0x38, 0x00, 0x7a, 0x19, 0x00, 0x7a, 0x19, 0x10, 0x0b, 0x35, 0x0b, 0x38, - 0x00, 0x7a, 0x19, 0x00, 0x7a, 0x19, 0x10, 0x0b, 0x35, 0x0b, 0x38, 0x00, 0x7a, 0x19, 0x00, 0x7a, - 0x19, 0x10, 0x0b, 0x35, 0x0b, 0x38, 0x00, 0x7a, 0x19, 0x00, 0x7a, 0x19, 0x10, 0x0b, 0x35, 0x0b, - 0x38, 0x00, 0x7a, 0x19, 0x00, 0x7a, 0x19, 0x10, 0x0b, 0x35, 0x0b, 0x38, 0x00, 0x7a, 0x19, 0x00, - 0x7a, 0x19, 0x10, 0x0b, 0x35, 0x0b, 0x38, 0x00, 0x7a, 0x19, 0x00, 0x7a, 0x19, 0x10, 0x0b, 0x35, - 0x0b, 0x38, 0x00, 0x7a, 0x19, 0x00, 0x7a, 0x19, 0x10, 0x0b, 0x35, 0x0b, 0x38, 0x00, 0x7a, 0x19, - 0x00, 0x7a, 0x19, 0x10, 0x0b, 0x35, 0x0b, 0x38, 0x00, 0x7a, 0x19, 0x00, 0x7a, 0x19, 0x10, 0x0b, - 0x35, 0x0b, 0x38, 0x00, 0x7a, 0x19, 0x00, 0x7a, 0x19, 0x10, 0x0b, 0x35, 0x0b, 0x38, 0x00, 0x7a, - 0x19, 0x00, 0x7a, 0x19, 0x10, 0x0b, 0x35, 0x0b, 0x38, 0x00, 0x7a, 0x19, 0x00, 0x7a, 0x19, 0x10, - 0x0b, 0x35, 0x0b, 0x38, 0x00, 0x7a, 0x19, 0x00, 0x7a, 0x19, 0x10, 0x0b, 0x35, 0x0b, 0x38, 0x00, - 0x7a, 0x19, 0x00, 0x7a, 0x19, 0x10, 0x0b, 0x35, 0xda, 0x29, 0x22, 0x1e, 0x50, 0x40, 0x0d, 0x7e, - 0x54, 0x0b, 0x1c, 0x9c, 0xb5, 0xa4, 0x2e, 0x54, 0x66, 0x16, 0x89, 0x54, 0x7e, 0x19, 0x00, 0x7a, - 0x39, 0x00, 0x0b, 0x34, 0x80, 0xe9, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, - 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, - 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, - 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, - 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, - 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, - 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, - 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, - 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, - 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, - 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, - 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, - 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, - 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, - 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, - 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, - 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, - 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, - 0x38, 0x00, 0x0b, 0x35, 0x7e, 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x7e, - 0x19, 0x00, 0x7e, 0x19, 0x10, 0x1b, 0x38, 0x00, 0x0b, 0x35, 0x22, 0x67, 0x96, 0x69, 0x63, 0x69, - 0x7b, 0x6a, 0x49, 0x6a, 0xe4, 0x6b, 0x8e, 0x6b, 0xa9, 0x6c, 0x3b, 0x6b, 0xc4, 0x6c, 0x05, 0x69, - 0x96, 0x69, 0xaa, 0x7c, 0xb3, 0xbe, 0xb0, 0x0b, 0x28, 0x14, 0x75, 0x31, 0x09, 0x12, 0x7c, 0x15, - 0x75, 0x6d, 0x10, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x43, 0xe1, 0xc0, 0xd0, 0xf1, 0x22, 0xc0, 0xa8, - 0xc2, 0xaf, 0x23, 0x6c, 0xaa, 0x2e, 0x54, 0x67, 0x4b, 0x0b, 0x58, 0x50, 0x89, 0x54, 0x01, 0x02, - 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x75, 0x31, 0xb0, 0x12, 0x7c, 0x15, 0x0a, 0x32, 0x09, 0xb3, - 0x67, 0x8e, 0x42, 0x32, 0x19, 0x43, 0x00, 0x36, 0xd0, 0xa8, 0x22, 0x7c, 0xb2, 0x23, 0x0a, 0x3b, - 0x49, 0x33, 0x67, 0xcb, 0x0a, 0x22, 0x09, 0x32, 0x00, 0x36, 0x09, 0xb2, 0x67, 0x8e, 0xa5, 0xbb, - 0x00, 0x05, 0xf4, 0x52, 0x33, 0x80, 0x02, 0x42, 0x33, 0x89, 0x34, 0x67, 0xdb, 0x68, 0x09, 0x68, - 0x37, 0x68, 0x65, 0x68, 0x93, 0x68, 0xc1, 0x68, 0xef, 0x69, 0x1d, 0x12, 0x41, 0xb5, 0xd2, 0x28, - 0xd2, 0x08, 0xc2, 0x40, 0xc2, 0x48, 0xc2, 0x38, 0xc2, 0x30, 0x6d, 0x00, 0x7a, 0x03, 0x01, 0xcf, - 0x7e, 0x04, 0x00, 0x20, 0x7a, 0x07, 0x01, 0xaf, 0x7e, 0x04, 0x00, 0x38, 0x7a, 0x07, 0x01, 0xbf, - 0x12, 0x41, 0x16, 0x12, 0x60, 0xcf, 0x02, 0x69, 0x4b, 0x12, 0x41, 0xd4, 0xd2, 0x29, 0xd2, 0x09, - 0xc2, 0x41, 0xc2, 0x49, 0xc2, 0x39, 0xc2, 0x31, 0x6d, 0x00, 0x7a, 0x03, 0x01, 0xd0, 0x7e, 0x04, - 0x00, 0x20, 0x7a, 0x07, 0x01, 0xb1, 0x7e, 0x04, 0x00, 0x38, 0x7a, 0x07, 0x01, 0xc1, 0x12, 0x41, - 0x16, 0x12, 0x61, 0x05, 0x02, 0x69, 0x4b, 0x12, 0x41, 0xf3, 0xd2, 0x2a, 0xd2, 0x0a, 0xc2, 0x42, - 0xc2, 0x4a, 0xc2, 0x3a, 0xc2, 0x32, 0x6d, 0x00, 0x7a, 0x03, 0x01, 0xd1, 0x7e, 0x04, 0x00, 0x20, - 0x7a, 0x07, 0x01, 0xb3, 0x7e, 0x04, 0x00, 0x38, 0x7a, 0x07, 0x01, 0xc3, 0x12, 0x41, 0x16, 0x12, - 0x61, 0x3b, 0x02, 0x69, 0x4b, 0x12, 0x42, 0x12, 0xd2, 0x2b, 0xd2, 0x0b, 0xc2, 0x43, 0xc2, 0x4b, - 0xc2, 0x3b, 0xc2, 0x33, 0x6d, 0x00, 0x7a, 0x03, 0x01, 0xd2, 0x7e, 0x04, 0x00, 0x20, 0x7a, 0x07, - 0x01, 0xb5, 0x7e, 0x04, 0x00, 0x38, 0x7a, 0x07, 0x01, 0xc5, 0x12, 0x41, 0x16, 0x12, 0x61, 0x71, - 0x02, 0x69, 0x4b, 0x12, 0x42, 0x31, 0xd2, 0x2c, 0xd2, 0x0c, 0xc2, 0x44, 0xc2, 0x4c, 0xc2, 0x3c, - 0xc2, 0x34, 0x6d, 0x00, 0x7a, 0x03, 0x01, 0xd3, 0x7e, 0x04, 0x00, 0x20, 0x7a, 0x07, 0x01, 0xb7, - 0x7e, 0x04, 0x00, 0x38, 0x7a, 0x07, 0x01, 0xc7, 0x12, 0x41, 0x16, 0x12, 0x61, 0xa7, 0x02, 0x69, - 0x4b, 0x12, 0x42, 0x50, 0xd2, 0x2d, 0xd2, 0x0d, 0xc2, 0x45, 0xc2, 0x4d, 0xc2, 0x3d, 0xc2, 0x35, - 0x6d, 0x00, 0x7a, 0x03, 0x01, 0xd4, 0x7e, 0x04, 0x00, 0x20, 0x7a, 0x07, 0x01, 0xb9, 0x7e, 0x04, - 0x00, 0x38, 0x7a, 0x07, 0x01, 0xc9, 0x12, 0x41, 0x16, 0x12, 0x61, 0xdd, 0x02, 0x69, 0x4b, 0x12, - 0x42, 0x6f, 0xd2, 0x2e, 0xd2, 0x0e, 0xc2, 0x46, 0xc2, 0x4e, 0xc2, 0x3e, 0xc2, 0x36, 0x6d, 0x00, - 0x7a, 0x03, 0x01, 0xd5, 0x7e, 0x04, 0x00, 0x20, 0x7a, 0x07, 0x01, 0xbb, 0x7e, 0x04, 0x00, 0x38, - 0x7a, 0x07, 0x01, 0xcb, 0x12, 0x41, 0x16, 0x12, 0x62, 0x13, 0x02, 0x69, 0x4b, 0x12, 0x42, 0x8e, - 0xd2, 0x2f, 0xd2, 0x0f, 0xc2, 0x47, 0xc2, 0x4f, 0xc2, 0x3f, 0xc2, 0x37, 0x6d, 0x00, 0x7a, 0x03, - 0x01, 0xd6, 0x7e, 0x04, 0x00, 0x20, 0x7a, 0x07, 0x01, 0xbd, 0x7e, 0x04, 0x00, 0x38, 0x7a, 0x07, - 0x01, 0xcd, 0x12, 0x41, 0x16, 0x12, 0x62, 0x49, 0x02, 0x69, 0x4b, 0x7e, 0xa0, 0xd0, 0x7e, 0x60, - 0x0f, 0x12, 0x62, 0xb6, 0x40, 0x0c, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, - 0xc2, 0xd7, 0x22, 0x75, 0x31, 0xb1, 0x12, 0x7c, 0x15, 0x0a, 0x52, 0x23, 0x6d, 0x00, 0x59, 0x05, - 0x00, 0x48, 0x12, 0x41, 0x7e, 0x12, 0x41, 0x9a, 0xd0, 0xa8, 0x22, 0x75, 0x31, 0xb2, 0x12, 0x7c, - 0x15, 0x0a, 0x22, 0x09, 0xb2, 0x67, 0x8e, 0x42, 0x23, 0x7e, 0xb0, 0x9c, 0x19, 0xb2, 0x01, 0xcf, - 0x12, 0x31, 0x85, 0xd0, 0xa8, 0x22, 0x75, 0x31, 0xb7, 0x12, 0x7c, 0x15, 0x0a, 0x22, 0x09, 0xb2, - 0x67, 0x8e, 0x42, 0x24, 0x12, 0x35, 0x3d, 0xd0, 0xa8, 0x22, 0x75, 0x31, 0xb9, 0x12, 0x7c, 0x15, - 0x0a, 0x32, 0x09, 0xb3, 0x67, 0x8e, 0x42, 0x34, 0x19, 0x43, 0x00, 0x3e, 0x12, 0x69, 0xc2, 0xd0, - 0xa8, 0x22, 0x7c, 0xb2, 0x23, 0x0a, 0x0b, 0x7c, 0xb4, 0x20, 0xe0, 0x04, 0x6d, 0x33, 0x80, 0x04, - 0x49, 0x30, 0x01, 0x8f, 0x7e, 0xa0, 0xd8, 0xa5, 0xef, 0xca, 0x0b, 0xca, 0x29, 0x12, 0x62, 0xb6, - 0xda, 0x29, 0xda, 0x0b, 0x40, 0x62, 0x75, 0x31, 0xba, 0x12, 0x7c, 0x15, 0x7c, 0xb4, 0x30, 0xe0, - 0x1e, 0x6d, 0x33, 0x59, 0x30, 0x01, 0x8f, 0x7e, 0x34, 0x09, 0xe3, 0x0a, 0x82, 0x7e, 0x94, 0x04, - 0x00, 0xad, 0x89, 0x2d, 0x39, 0x59, 0x30, 0x01, 0x6f, 0x59, 0x30, 0x01, 0x7f, 0x7c, 0xb4, 0x30, - 0xe1, 0x10, 0x7e, 0x04, 0x80, 0x00, 0x4c, 0x02, 0x09, 0xb0, 0x00, 0x08, 0x44, 0x04, 0x19, 0xb0, - 0x00, 0x08, 0x0a, 0x02, 0x09, 0xb0, 0x67, 0x8e, 0x42, 0x21, 0xf4, 0x52, 0x34, 0x7c, 0xb2, 0x23, - 0x0a, 0x0b, 0xca, 0x19, 0x49, 0x00, 0x30, 0xd5, 0x99, 0x04, 0xda, 0x19, 0xc0, 0xf1, 0x75, 0xf1, - 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0xc2, 0xd7, 0x22, 0x7e, 0x04, 0x80, 0x00, 0x4c, 0x02, 0x09, - 0x30, 0x00, 0x0c, 0x74, 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0x09, 0xb0, 0x00, 0x08, 0x19, 0x30, 0x00, - 0x0c, 0x7c, 0x74, 0x5e, 0x70, 0x01, 0x68, 0x12, 0x44, 0x40, 0xca, 0xb8, 0x09, 0xb0, 0x00, 0x10, - 0x44, 0x02, 0x19, 0xb0, 0x00, 0x10, 0xda, 0xb8, 0x80, 0x02, 0x54, 0xbf, 0x7c, 0x74, 0x5e, 0x70, - 0x08, 0x68, 0x04, 0x44, 0x08, 0x80, 0x02, 0x54, 0xf7, 0x09, 0x30, 0x00, 0x0c, 0xca, 0xb8, 0x74, - 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0xda, 0xb8, 0x19, 0xb0, 0x00, 0x08, 0x19, 0x30, 0x00, 0x0c, 0x0a, - 0x62, 0x09, 0xb6, 0x67, 0x8e, 0x3e, 0x20, 0x0a, 0x62, 0x7c, 0x74, 0x5e, 0x70, 0x02, 0x68, 0x20, - 0x42, 0x27, 0xca, 0xb8, 0x74, 0x61, 0x19, 0xb0, 0x00, 0x08, 0x7e, 0x44, 0x00, 0x10, 0x59, 0x46, - 0x01, 0xbf, 0x09, 0xb0, 0x00, 0x10, 0x44, 0x01, 0x19, 0xb0, 0x00, 0x10, 0xda, 0xb8, 0x80, 0x11, - 0xf4, 0x52, 0x27, 0x74, 0xa1, 0x19, 0xb0, 0x00, 0x08, 0x7e, 0x44, 0x00, 0x38, 0x59, 0x46, 0x01, - 0xbf, 0xd0, 0xa8, 0x22, 0x7c, 0x74, 0x7e, 0x04, 0x80, 0x00, 0x4c, 0x02, 0x0a, 0x62, 0x09, 0xb6, - 0x67, 0x8e, 0xa5, 0xfd, 0xf4, 0xa5, 0xfe, 0xca, 0x28, 0x3e, 0x20, 0x0a, 0x62, 0xa5, 0xee, 0x52, - 0x26, 0x7e, 0x44, 0x00, 0x20, 0x59, 0x46, 0x01, 0xaf, 0xda, 0x28, 0x09, 0x30, 0x00, 0x0c, 0x74, - 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0x09, 0xb0, 0x00, 0x08, 0x7c, 0x74, 0x5e, 0x70, 0x01, 0x68, 0x0c, - 0x44, 0x80, 0xca, 0xb8, 0xa5, 0xed, 0x42, 0x2a, 0xda, 0xb8, 0x80, 0x0a, 0x54, 0x7f, 0xca, 0xb8, - 0xa5, 0xee, 0x52, 0x2a, 0xda, 0xb8, 0x7c, 0x74, 0x5e, 0x70, 0x08, 0x68, 0x04, 0x44, 0x02, 0x80, - 0x02, 0x54, 0xfd, 0x19, 0xb0, 0x00, 0x08, 0x19, 0x30, 0x00, 0x0c, 0x7c, 0x74, 0x5e, 0x70, 0x02, - 0x68, 0x10, 0xa5, 0xed, 0x42, 0x28, 0x42, 0x26, 0x7e, 0x44, 0x00, 0x08, 0x59, 0x46, 0x01, 0xaf, - 0x80, 0x04, 0xa5, 0xee, 0x52, 0x28, 0x7c, 0x74, 0x5e, 0x70, 0x04, 0x68, 0x10, 0xa5, 0xed, 0x42, - 0x29, 0x42, 0x26, 0x7e, 0x44, 0x00, 0x08, 0x59, 0x46, 0x01, 0xaf, 0x80, 0x0b, 0xa5, 0xee, 0x52, - 0x29, 0x7c, 0x74, 0x5e, 0x70, 0x02, 0x78, 0x00, 0x12, 0x42, 0xad, 0xd0, 0xa8, 0x22, 0x7e, 0x04, - 0x80, 0x00, 0x4c, 0x02, 0x09, 0x30, 0x00, 0x0c, 0x74, 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0x19, 0x40, - 0x00, 0x10, 0x19, 0x30, 0x00, 0x0c, 0xd0, 0xa8, 0x22, 0x7e, 0x04, 0x80, 0x00, 0x4c, 0x02, 0x09, - 0x30, 0x00, 0x0c, 0x74, 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0x19, 0x40, 0x00, 0x18, 0x19, 0x30, 0x00, - 0x0c, 0xd0, 0xa8, 0x22, 0x75, 0x31, 0xb5, 0x12, 0x7c, 0x15, 0x7e, 0x04, 0x80, 0x00, 0x4c, 0x02, - 0x09, 0xb0, 0x00, 0x0c, 0x44, 0x40, 0x19, 0xb0, 0x00, 0x0c, 0xe5, 0x6e, 0xb4, 0x07, 0x23, 0x09, - 0xb0, 0x00, 0x10, 0x4e, 0xb0, 0x02, 0x19, 0xb0, 0x00, 0x10, 0x09, 0x30, 0x00, 0x0c, 0x74, 0xbf, - 0x19, 0xb0, 0x00, 0x0c, 0x09, 0xb0, 0x00, 0x04, 0x54, 0xf7, 0x19, 0xb0, 0x00, 0x04, 0x19, 0x30, - 0x00, 0x0c, 0xd0, 0xa8, 0x22, 0x75, 0x31, 0xb6, 0x12, 0x7c, 0x15, 0x7e, 0x04, 0x80, 0x00, 0x4c, - 0x02, 0xe5, 0x6e, 0xb4, 0x07, 0x18, 0x09, 0x30, 0x00, 0x0c, 0x74, 0xbf, 0x19, 0xb0, 0x00, 0x0c, - 0x09, 0xb0, 0x00, 0x04, 0x44, 0x08, 0x19, 0xb0, 0x00, 0x04, 0x19, 0x30, 0x00, 0x0c, 0x09, 0xb0, - 0x00, 0x0c, 0x54, 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0xd0, 0xa8, 0x22, 0x75, 0x31, 0xb4, 0x12, 0x7c, - 0x15, 0x7a, 0x21, 0x31, 0x12, 0x7c, 0x15, 0x7a, 0x41, 0x31, 0x12, 0x7c, 0x15, 0x0a, 0x32, 0x09, - 0xb3, 0x67, 0x8e, 0x42, 0x35, 0x12, 0x6c, 0x5b, 0xd0, 0xa8, 0x22, 0x7e, 0xb0, 0x01, 0x7e, 0xa0, - 0xc8, 0x7c, 0x64, 0x12, 0x62, 0xb6, 0x40, 0x13, 0x0a, 0x32, 0x09, 0xb3, 0x67, 0x8e, 0xf4, 0x52, - 0x35, 0xc0, 0xf1, 0x75, 0xf1, 0x01, 0x12, 0x6f, 0xd9, 0xd0, 0xf1, 0x22, 0x6c, 0x8c, 0x6c, 0xd3, - 0x6d, 0x1a, 0x6d, 0x61, 0x6d, 0xa8, 0x6d, 0xef, 0x6e, 0x36, 0x6e, 0x7d, 0x75, 0x31, 0x55, 0x12, - 0x7c, 0x15, 0x75, 0x31, 0x00, 0x12, 0x7c, 0x15, 0x7a, 0x61, 0x31, 0x12, 0x7c, 0x15, 0x7a, 0x71, - 0x31, 0x12, 0x7c, 0x15, 0x7e, 0x17, 0x01, 0x7f, 0x7e, 0x27, 0x01, 0x8f, 0x2d, 0x23, 0x7e, 0x09, - 0xb0, 0x0b, 0x04, 0x7a, 0x19, 0xb0, 0x0b, 0x14, 0xbe, 0x14, 0x0d, 0xe2, 0x38, 0x0f, 0x1b, 0x34, - 0x78, 0xec, 0x7a, 0x17, 0x01, 0x7f, 0x7a, 0x27, 0x01, 0x8f, 0x02, 0x46, 0x0f, 0x7e, 0x14, 0x09, - 0xe3, 0x80, 0xeb, 0x75, 0x31, 0x55, 0x12, 0x7c, 0x15, 0x75, 0x31, 0x01, 0x12, 0x7c, 0x15, 0x7a, - 0x61, 0x31, 0x12, 0x7c, 0x15, 0x7a, 0x71, 0x31, 0x12, 0x7c, 0x15, 0x7e, 0x17, 0x01, 0x81, 0x7e, - 0x27, 0x01, 0x91, 0x2d, 0x23, 0x7e, 0x09, 0xb0, 0x0b, 0x04, 0x7a, 0x19, 0xb0, 0x0b, 0x14, 0xbe, - 0x14, 0x11, 0xe2, 0x38, 0x0f, 0x1b, 0x34, 0x78, 0xec, 0x7a, 0x17, 0x01, 0x81, 0x7a, 0x27, 0x01, - 0x91, 0x02, 0x49, 0x67, 0x7e, 0x14, 0x0d, 0xe3, 0x80, 0xeb, 0x75, 0x31, 0x55, 0x12, 0x7c, 0x15, - 0x75, 0x31, 0x02, 0x12, 0x7c, 0x15, 0x7a, 0x61, 0x31, 0x12, 0x7c, 0x15, 0x7a, 0x71, 0x31, 0x12, - 0x7c, 0x15, 0x7e, 0x17, 0x01, 0x83, 0x7e, 0x27, 0x01, 0x93, 0x2d, 0x23, 0x7e, 0x09, 0xb0, 0x0b, - 0x04, 0x7a, 0x19, 0xb0, 0x0b, 0x14, 0xbe, 0x14, 0x15, 0xe2, 0x38, 0x0f, 0x1b, 0x34, 0x78, 0xec, - 0x7a, 0x17, 0x01, 0x83, 0x7a, 0x27, 0x01, 0x93, 0x02, 0x4c, 0xbf, 0x7e, 0x14, 0x11, 0xe3, 0x80, - 0xeb, 0x75, 0x31, 0x55, 0x12, 0x7c, 0x15, 0x75, 0x31, 0x03, 0x12, 0x7c, 0x15, 0x7a, 0x61, 0x31, - 0x12, 0x7c, 0x15, 0x7a, 0x71, 0x31, 0x12, 0x7c, 0x15, 0x7e, 0x17, 0x01, 0x85, 0x7e, 0x27, 0x01, - 0x95, 0x2d, 0x23, 0x7e, 0x09, 0xb0, 0x0b, 0x04, 0x7a, 0x19, 0xb0, 0x0b, 0x14, 0xbe, 0x14, 0x19, - 0xe2, 0x38, 0x0f, 0x1b, 0x34, 0x78, 0xec, 0x7a, 0x17, 0x01, 0x85, 0x7a, 0x27, 0x01, 0x95, 0x02, - 0x50, 0x17, 0x7e, 0x14, 0x15, 0xe3, 0x80, 0xeb, 0x75, 0x31, 0x55, 0x12, 0x7c, 0x15, 0x75, 0x31, - 0x04, 0x12, 0x7c, 0x15, 0x7a, 0x61, 0x31, 0x12, 0x7c, 0x15, 0x7a, 0x71, 0x31, 0x12, 0x7c, 0x15, - 0x7e, 0x17, 0x01, 0x87, 0x7e, 0x27, 0x01, 0x97, 0x2d, 0x23, 0x7e, 0x09, 0xb0, 0x0b, 0x04, 0x7a, - 0x19, 0xb0, 0x0b, 0x14, 0xbe, 0x14, 0x1d, 0xe2, 0x38, 0x0f, 0x1b, 0x34, 0x78, 0xec, 0x7a, 0x17, - 0x01, 0x87, 0x7a, 0x27, 0x01, 0x97, 0x02, 0x53, 0x6f, 0x7e, 0x14, 0x19, 0xe3, 0x80, 0xeb, 0x75, - 0x31, 0x55, 0x12, 0x7c, 0x15, 0x75, 0x31, 0x05, 0x12, 0x7c, 0x15, 0x7a, 0x61, 0x31, 0x12, 0x7c, - 0x15, 0x7a, 0x71, 0x31, 0x12, 0x7c, 0x15, 0x7e, 0x17, 0x01, 0x89, 0x7e, 0x27, 0x01, 0x99, 0x2d, - 0x23, 0x7e, 0x09, 0xb0, 0x0b, 0x04, 0x7a, 0x19, 0xb0, 0x0b, 0x14, 0xbe, 0x14, 0x21, 0xe2, 0x38, - 0x0f, 0x1b, 0x34, 0x78, 0xec, 0x7a, 0x17, 0x01, 0x89, 0x7a, 0x27, 0x01, 0x99, 0x02, 0x56, 0xc7, - 0x7e, 0x14, 0x1d, 0xe3, 0x80, 0xeb, 0x75, 0x31, 0x55, 0x12, 0x7c, 0x15, 0x75, 0x31, 0x06, 0x12, - 0x7c, 0x15, 0x7a, 0x61, 0x31, 0x12, 0x7c, 0x15, 0x7a, 0x71, 0x31, 0x12, 0x7c, 0x15, 0x7e, 0x17, - 0x01, 0x8b, 0x7e, 0x27, 0x01, 0x9b, 0x2d, 0x23, 0x7e, 0x09, 0xb0, 0x0b, 0x04, 0x7a, 0x19, 0xb0, - 0x0b, 0x14, 0xbe, 0x14, 0x25, 0xe2, 0x38, 0x0f, 0x1b, 0x34, 0x78, 0xec, 0x7a, 0x17, 0x01, 0x8b, - 0x7a, 0x27, 0x01, 0x9b, 0x02, 0x5a, 0x1f, 0x7e, 0x14, 0x21, 0xe3, 0x80, 0xeb, 0x75, 0x31, 0x55, - 0x12, 0x7c, 0x15, 0x75, 0x31, 0x07, 0x12, 0x7c, 0x15, 0x7a, 0x61, 0x31, 0x12, 0x7c, 0x15, 0x7a, - 0x71, 0x31, 0x12, 0x7c, 0x15, 0x7e, 0x17, 0x01, 0x8d, 0x7e, 0x27, 0x01, 0x9d, 0x2d, 0x23, 0x7e, - 0x09, 0xb0, 0x0b, 0x04, 0x7a, 0x19, 0xb0, 0x0b, 0x14, 0xbe, 0x14, 0x29, 0xe2, 0x38, 0x0f, 0x1b, - 0x34, 0x78, 0xec, 0x7a, 0x17, 0x01, 0x8d, 0x7a, 0x27, 0x01, 0x9d, 0x02, 0x5d, 0x77, 0x7e, 0x14, - 0x25, 0xe3, 0x80, 0xeb, 0xca, 0xb8, 0xc0, 0xf1, 0x75, 0x31, 0x02, 0x12, 0x7c, 0x15, 0xe5, 0xc0, - 0x54, 0x03, 0x68, 0x05, 0x12, 0x75, 0xcd, 0x80, 0xf5, 0x30, 0xc2, 0x08, 0x75, 0xf1, 0x01, 0x12, - 0x6f, 0xd9, 0x80, 0x14, 0x30, 0xc3, 0x08, 0x75, 0xf1, 0x01, 0x12, 0x6e, 0xfd, 0x80, 0x09, 0x30, - 0xc4, 0x06, 0x75, 0xf1, 0x02, 0x12, 0x70, 0xe9, 0xd0, 0xf1, 0xda, 0xb8, 0x32, 0x75, 0x31, 0x10, - 0x12, 0x7c, 0x15, 0xca, 0x0b, 0xca, 0x39, 0xca, 0x59, 0xc2, 0xc3, 0xa9, 0x21, 0xe2, 0x5c, 0xe5, - 0xe5, 0x54, 0xc0, 0x68, 0x4f, 0xe5, 0xe6, 0x6c, 0xaa, 0x7e, 0x37, 0x01, 0xdb, 0x2d, 0x35, 0xbe, - 0x34, 0x04, 0x00, 0x38, 0x4a, 0x7a, 0x37, 0x01, 0xdb, 0x7e, 0x37, 0x01, 0xd9, 0x7d, 0x43, 0x2d, - 0x45, 0xbe, 0x44, 0x09, 0xe2, 0x38, 0x40, 0x7a, 0x47, 0x01, 0xd9, 0x75, 0x31, 0x11, 0x12, 0x7c, - 0x15, 0x7a, 0xb1, 0x31, 0x12, 0x7c, 0x15, 0x12, 0x71, 0xb8, 0xa9, 0x21, 0xe5, 0x1f, 0xa9, 0xd4, - 0xe4, 0xa9, 0x24, 0xe4, 0xfc, 0xc2, 0xc3, 0xa9, 0x21, 0xe2, 0x3b, 0xe5, 0xe5, 0x54, 0xc0, 0x78, - 0xb4, 0x12, 0x74, 0x5a, 0xda, 0x59, 0xda, 0x39, 0xda, 0x0b, 0x22, 0x80, 0x29, 0x80, 0x58, 0x75, - 0x31, 0x16, 0x12, 0x7c, 0x15, 0x80, 0xed, 0x75, 0x31, 0x12, 0x12, 0x7c, 0x15, 0x7a, 0xb1, 0x31, - 0x12, 0x7c, 0x15, 0x9e, 0x44, 0x09, 0xe3, 0x9d, 0x54, 0x12, 0x71, 0xb8, 0x7e, 0x34, 0x05, 0xe3, - 0x7d, 0x54, 0x2d, 0x43, 0x80, 0xa1, 0xe5, 0xe5, 0x54, 0x03, 0x78, 0x12, 0x75, 0x31, 0x13, 0x12, - 0x7c, 0x15, 0x7e, 0x0f, 0x29, 0xff, 0x0b, 0x0c, 0x7a, 0x0f, 0x29, 0xff, 0x80, 0xa7, 0x75, 0x31, - 0x14, 0x12, 0x7c, 0x15, 0x7e, 0x0f, 0x2a, 0x03, 0x0b, 0x0c, 0x7a, 0x0f, 0x2a, 0x03, 0xa9, 0xd7, - 0xe4, 0xa9, 0x27, 0xe4, 0xfc, 0x80, 0x9d, 0x75, 0x31, 0x15, 0x12, 0x7c, 0x15, 0x7e, 0x0f, 0x2a, - 0x07, 0x0b, 0x0c, 0x7a, 0x0f, 0x2a, 0x07, 0x80, 0xe5, 0x75, 0x31, 0x18, 0x12, 0x7c, 0x15, 0xca, - 0x09, 0xca, 0x39, 0xca, 0x2b, 0xc2, 0xc2, 0xa9, 0x21, 0xf2, 0x52, 0xe5, 0xf5, 0x33, 0x82, 0xe7, - 0x40, 0x44, 0x7e, 0x37, 0x01, 0xe1, 0x7e, 0x54, 0x00, 0x40, 0x9d, 0x35, 0x40, 0x43, 0x7a, 0x37, - 0x01, 0xe1, 0x7e, 0x37, 0x01, 0xdd, 0x7d, 0x43, 0x2d, 0x45, 0xbe, 0x44, 0x05, 0xe2, 0x38, 0x52, - 0x7a, 0x47, 0x01, 0xdd, 0x7d, 0x45, 0x12, 0x73, 0x16, 0xa9, 0x20, 0xf5, 0x22, 0x75, 0x31, 0x19, - 0x12, 0x7c, 0x15, 0x7a, 0x91, 0x31, 0x12, 0x7c, 0x15, 0x7a, 0x81, 0xf7, 0x7a, 0x91, 0xf6, 0xe5, - 0xf5, 0x33, 0x82, 0xe7, 0x50, 0xbc, 0xda, 0x2b, 0xda, 0x39, 0xda, 0x09, 0x22, 0x80, 0x41, 0x80, - 0x64, 0x2d, 0x53, 0x6d, 0x33, 0x70, 0xb7, 0x7e, 0x04, 0x01, 0xe3, 0x7a, 0x07, 0x01, 0xdf, 0x7a, - 0x07, 0x01, 0xdd, 0xa9, 0x32, 0xf2, 0xdf, 0x85, 0x30, 0x31, 0x12, 0x7c, 0x15, 0x75, 0xf6, 0x00, - 0x80, 0xd4, 0xca, 0x59, 0x9e, 0x44, 0x05, 0xe3, 0x9d, 0x54, 0x12, 0x73, 0x16, 0x7e, 0x34, 0x01, - 0xe3, 0x7d, 0x54, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xdd, 0x12, 0x73, 0x16, 0xda, 0x49, 0x80, 0x99, - 0xe5, 0xf5, 0x54, 0x03, 0x78, 0x1f, 0x7e, 0x0f, 0x29, 0xef, 0x0b, 0x0c, 0x7a, 0x0f, 0x29, 0xef, - 0x80, 0x9d, 0x7e, 0x0f, 0x29, 0xf7, 0x0b, 0x0c, 0x7a, 0x0f, 0x29, 0xf7, 0xa9, 0xd7, 0xf4, 0xa9, - 0x27, 0xf4, 0xfc, 0x80, 0x8a, 0x7e, 0x0f, 0x29, 0xf3, 0x0b, 0x0c, 0x7a, 0x0f, 0x29, 0xf3, 0x80, - 0xeb, 0xe5, 0xf5, 0x54, 0x03, 0x78, 0x1f, 0x7e, 0x2f, 0x2a, 0x0f, 0x0b, 0x2c, 0x7a, 0x2f, 0x2a, - 0x0f, 0x80, 0x34, 0x7e, 0x2f, 0x2a, 0x17, 0x0b, 0x2c, 0x7a, 0x2f, 0x2a, 0x17, 0xa9, 0xd7, 0xf4, - 0xa9, 0x27, 0xf4, 0xfc, 0x80, 0x21, 0x7e, 0x2f, 0x2a, 0x13, 0x0b, 0x2c, 0x7a, 0x2f, 0x2a, 0x13, - 0x80, 0xeb, 0xda, 0x2b, 0xda, 0x1b, 0xda, 0x0b, 0x22, 0x75, 0x31, 0x28, 0x12, 0x7c, 0x15, 0xca, - 0x0b, 0xca, 0x1b, 0xca, 0x2b, 0xc2, 0xc4, 0xa9, 0x21, 0xf2, 0xb6, 0xe5, 0xf5, 0x33, 0x72, 0xe7, - 0x40, 0xe0, 0x7e, 0x0d, 0x46, 0x7e, 0x1d, 0x4a, 0x7e, 0x2d, 0x4e, 0x7e, 0x3d, 0x52, 0x7e, 0x85, - 0x56, 0x7d, 0x90, 0x4d, 0x91, 0x4d, 0x92, 0x4d, 0x93, 0x4d, 0x94, 0x4d, 0x95, 0x4d, 0x96, 0x4d, - 0x97, 0x4d, 0x98, 0x68, 0x72, 0x7a, 0x11, 0xf3, 0x7a, 0x01, 0xf3, 0x7a, 0x31, 0xf3, 0x7a, 0x21, - 0xf3, 0x7a, 0x51, 0xf3, 0x7a, 0x41, 0xf3, 0x7a, 0x71, 0xf3, 0x7a, 0x61, 0xf3, 0x7a, 0x91, 0xf3, - 0x7a, 0x81, 0xf3, 0x30, 0x7b, 0x1a, 0x7a, 0xb1, 0xf3, 0x7a, 0xa1, 0xf3, 0x7a, 0xd1, 0xf3, 0x7a, - 0xc1, 0xf3, 0x7a, 0xf1, 0xf3, 0x7a, 0xe1, 0xf3, 0x7d, 0x78, 0x7a, 0xf1, 0xf3, 0x7a, 0xe1, 0xf3, - 0xa9, 0x30, 0xf5, 0x03, 0x02, 0x70, 0xd6, 0x75, 0x31, 0x29, 0x12, 0x7c, 0x15, 0x20, 0x7b, 0x0b, - 0x75, 0x31, 0x0a, 0x12, 0x7c, 0x15, 0x75, 0xf6, 0x0a, 0x80, 0x09, 0x75, 0x31, 0x12, 0x12, 0x7c, - 0x15, 0x75, 0xf6, 0x12, 0x6d, 0x00, 0x7d, 0x10, 0x7a, 0x0d, 0x46, 0x7a, 0x0d, 0x4a, 0x7a, 0x0d, - 0x4e, 0x7a, 0x0d, 0x52, 0x7a, 0x05, 0x56, 0xda, 0x2b, 0xda, 0x1b, 0xda, 0x0b, 0x22, 0x1e, 0xb0, - 0x40, 0x0c, 0x7e, 0xa0, 0x0a, 0xa4, 0x7e, 0x04, 0x72, 0xfb, 0x9d, 0x05, 0x89, 0x04, 0x7e, 0xa1, - 0xe3, 0x7a, 0x39, 0xa0, 0x0b, 0x34, 0x80, 0xea, 0xb4, 0x40, 0xe3, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, - 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, - 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, - 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, - 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, - 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, - 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, - 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, - 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, - 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, - 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, - 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, - 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, - 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, - 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, - 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, - 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, - 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, - 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, - 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, - 0x35, 0x7e, 0xa1, 0xe3, 0xe5, 0xe3, 0x1b, 0x38, 0x50, 0x0b, 0x35, 0x22, 0x1e, 0xb0, 0x40, 0x0c, - 0x7e, 0xa0, 0x0a, 0xa4, 0x7e, 0x04, 0x74, 0x59, 0x9d, 0x05, 0x89, 0x04, 0x7e, 0x39, 0xa0, 0x7a, - 0xa1, 0xf3, 0x0b, 0x34, 0x80, 0xea, 0xb4, 0x40, 0xe3, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, - 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, - 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, - 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, - 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, - 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, - 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, - 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, - 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, - 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, - 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, - 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, - 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, - 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, - 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, - 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, - 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, - 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, - 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, - 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x0b, - 0x38, 0x50, 0x7a, 0xa1, 0xf3, 0xf5, 0xf3, 0x0b, 0x35, 0x22, 0xc2, 0xaf, 0x7e, 0x37, 0x01, 0xdb, - 0x4d, 0x33, 0x68, 0x3b, 0x7e, 0x07, 0x01, 0xd7, 0x7e, 0x54, 0x09, 0xe3, 0x9d, 0x50, 0xbd, 0x35, - 0x40, 0x02, 0x7d, 0x35, 0xca, 0x39, 0x7e, 0x65, 0x61, 0x99, 0x64, 0xda, 0x39, 0x7e, 0x07, 0x01, - 0xdb, 0x9d, 0x03, 0x7a, 0x07, 0x01, 0xdb, 0x2e, 0x37, 0x01, 0xd7, 0x7a, 0x37, 0x01, 0xd7, 0xbe, - 0x34, 0x09, 0xe2, 0x28, 0xc7, 0x7e, 0x34, 0x05, 0xe3, 0x7a, 0x37, 0x01, 0xd7, 0x80, 0xbd, 0xd2, - 0xaf, 0x22, 0x75, 0x31, 0x53, 0x12, 0x7c, 0x15, 0x7e, 0x15, 0x63, 0x80, 0x11, 0x75, 0x31, 0x51, - 0x12, 0x7c, 0x15, 0x0b, 0x08, 0x10, 0x0b, 0x05, 0x9e, 0x34, 0x00, 0x02, 0x28, 0x4d, 0x7c, 0xb2, - 0x20, 0xe7, 0x27, 0x54, 0x07, 0x23, 0x0a, 0x2b, 0x49, 0x22, 0x6c, 0x7c, 0x7c, 0xb2, 0x54, 0x78, - 0x03, 0x03, 0x03, 0x7c, 0x2b, 0x9d, 0x13, 0x40, 0x1a, 0x68, 0x12, 0x7a, 0x15, 0x63, 0x7a, 0x25, - 0x65, 0x7e, 0x64, 0x75, 0x37, 0x7a, 0x65, 0x61, 0x89, 0x24, 0x02, 0x75, 0x45, 0x7e, 0x64, 0x74, - 0xad, 0x80, 0xf2, 0x2d, 0x13, 0x9d, 0x31, 0xca, 0x39, 0x7d, 0x31, 0x2d, 0x10, 0xca, 0x19, 0xca, - 0x29, 0x99, 0x24, 0xda, 0x29, 0xda, 0x09, 0xda, 0x39, 0x80, 0xa2, 0x7a, 0x15, 0x63, 0x7e, 0x64, - 0x75, 0x23, 0x4d, 0x33, 0x78, 0x09, 0x7c, 0xb2, 0x20, 0xe7, 0x2a, 0x7e, 0x64, 0x74, 0xa2, 0x7a, - 0x65, 0x61, 0x22, 0x75, 0x31, 0x52, 0x12, 0x7c, 0x15, 0x7e, 0x21, 0x63, 0x7e, 0x09, 0x30, 0x0b, - 0x04, 0x1b, 0x34, 0x78, 0x89, 0x80, 0xd4, 0x75, 0x31, 0x54, 0x12, 0x7c, 0x15, 0x7e, 0x15, 0x63, - 0x7e, 0x25, 0x65, 0x80, 0x90, 0x5e, 0x20, 0x07, 0x54, 0x78, 0x7e, 0x44, 0x75, 0xc1, 0x30, 0xe6, - 0x16, 0x4d, 0x33, 0x68, 0x26, 0x1b, 0x34, 0x7e, 0x09, 0x40, 0x0b, 0x04, 0x7e, 0x44, 0x67, 0x63, - 0x20, 0xe3, 0x04, 0x7e, 0x44, 0x75, 0xc9, 0xca, 0x09, 0xca, 0x39, 0x99, 0x44, 0xda, 0x39, 0xda, - 0x09, 0x7e, 0x64, 0x74, 0xad, 0x4d, 0x33, 0x68, 0xa6, 0x89, 0x64, 0x7a, 0x15, 0x63, 0xf5, 0x65, - 0x7e, 0x64, 0x75, 0x86, 0x80, 0x99, 0x7e, 0x15, 0x63, 0xe5, 0x65, 0x80, 0xc4, 0xc0, 0xd0, 0xc0, - 0xd1, 0xc0, 0xe0, 0xca, 0x19, 0xa9, 0x20, 0xdf, 0x12, 0xa9, 0x21, 0xdf, 0x1b, 0x75, 0x31, 0x01, - 0x12, 0x7c, 0x15, 0x53, 0xdf, 0xf7, 0x12, 0x40, 0xdc, 0x80, 0x0d, 0x75, 0x31, 0xfe, 0x12, 0x7c, - 0x15, 0x7e, 0x14, 0x00, 0x53, 0x02, 0x40, 0x51, 0xda, 0x19, 0xd0, 0xe0, 0xd0, 0xd1, 0xd0, 0xd0, - 0x32, 0x03, 0xa5, 0xcb, 0x19, 0xb1, 0x80, 0x00, 0x22, 0x22, 0x02, 0x76, 0x42, 0xca, 0x0b, 0xca, - 0x1b, 0xca, 0x2b, 0xca, 0x3b, 0xca, 0x4b, 0xca, 0x5b, 0xca, 0x6b, 0xca, 0x7b, 0xca, 0xeb, 0xc0, - 0xf1, 0x7e, 0xb3, 0x2a, 0x33, 0xb4, 0x00, 0x02, 0x80, 0x19, 0xb4, 0x01, 0x16, 0x30, 0xc0, 0x08, - 0x75, 0xf1, 0x00, 0x12, 0x76, 0x2c, 0x80, 0x1f, 0x30, 0xc1, 0x1c, 0x75, 0xf1, 0x00, 0x12, 0x76, - 0xbd, 0x80, 0x14, 0x30, 0xc1, 0x08, 0x75, 0xf1, 0x00, 0x12, 0x76, 0xbd, 0x80, 0x09, 0x30, 0xc0, - 0x06, 0x75, 0xf1, 0x00, 0x12, 0x76, 0x2c, 0xd0, 0xf1, 0xda, 0xeb, 0xda, 0x7b, 0xda, 0x6b, 0xda, - 0x5b, 0xda, 0x4b, 0xda, 0x3b, 0xda, 0x2b, 0xda, 0x1b, 0xda, 0x0b, 0x22, 0xc2, 0xc0, 0x7e, 0xb3, - 0x2a, 0x33, 0xb4, 0x02, 0x07, 0x12, 0x76, 0x4e, 0x02, 0x76, 0x42, 0x22, 0xb4, 0x01, 0xfc, 0x02, - 0x76, 0x88, 0x7e, 0x00, 0x00, 0x7a, 0x03, 0x2a, 0x33, 0x7a, 0x03, 0x2a, 0x34, 0x22, 0x7e, 0xb3, - 0x2a, 0x2b, 0x54, 0x60, 0x60, 0x05, 0xb4, 0x40, 0x15, 0x80, 0x13, 0x7e, 0xb3, 0x2a, 0x2c, 0xb4, - 0x05, 0x0c, 0x75, 0x31, 0x71, 0x12, 0x7c, 0x15, 0x7e, 0xb3, 0x2a, 0x2e, 0xf5, 0x8f, 0x22, 0x75, - 0xf6, 0x00, 0x22, 0xbe, 0x57, 0x2a, 0x31, 0x28, 0x04, 0x7e, 0x57, 0x2a, 0x31, 0x7a, 0x0f, 0x2a, - 0x36, 0x7a, 0x57, 0x2a, 0x3a, 0x02, 0x76, 0x88, 0x7e, 0xef, 0x2a, 0x36, 0x7e, 0xf7, 0x2a, 0x3a, - 0x7e, 0x07, 0x2a, 0x3a, 0x4d, 0x00, 0x68, 0x21, 0x7e, 0x00, 0x00, 0x7e, 0xeb, 0xb0, 0xf5, 0xf3, - 0xa3, 0xa5, 0x08, 0x1b, 0xf4, 0x68, 0x04, 0xa5, 0xb8, 0x08, 0xf0, 0x7a, 0xef, 0x2a, 0x36, 0x7a, - 0xf7, 0x2a, 0x3a, 0x75, 0x31, 0x06, 0x12, 0x7c, 0x15, 0x7a, 0x01, 0xf6, 0x22, 0xc2, 0xc1, 0x75, - 0x31, 0x03, 0x12, 0x7c, 0x15, 0xa9, 0x36, 0xe2, 0x16, 0xe5, 0xf5, 0x54, 0xc0, 0x68, 0x07, 0xa9, - 0xd7, 0xf4, 0xa9, 0x27, 0xf4, 0xfc, 0x53, 0xe1, 0x3f, 0x43, 0xf2, 0x88, 0x02, 0x77, 0x29, 0x7e, - 0xb3, 0x2a, 0x34, 0xb4, 0x02, 0x04, 0xa9, 0xd4, 0xe4, 0x22, 0xb4, 0x01, 0x39, 0x7e, 0x21, 0xe6, - 0x7c, 0x32, 0x7e, 0x13, 0x2a, 0x35, 0x2c, 0x21, 0x7a, 0x23, 0x2a, 0x35, 0x7e, 0x00, 0x00, 0x2e, - 0x04, 0x2a, 0x3c, 0xe5, 0xe3, 0x7a, 0x09, 0xb0, 0x0b, 0x04, 0xa5, 0xdb, 0xf6, 0xa9, 0xd4, 0xe4, - 0x75, 0x31, 0x70, 0x12, 0x7c, 0x15, 0x7e, 0xb3, 0x2a, 0x35, 0x7e, 0xa3, 0x2a, 0x32, 0xbc, 0xab, - 0x78, 0x03, 0x12, 0x77, 0xc0, 0x22, 0x02, 0x7b, 0x29, 0xe5, 0xe6, 0xb4, 0x08, 0x65, 0xa9, 0xc4, - 0xe2, 0x7e, 0x01, 0xe3, 0x7e, 0x11, 0xe3, 0x7e, 0x31, 0xe3, 0x7e, 0x21, 0xe3, 0x7e, 0x51, 0xe3, - 0x7e, 0x41, 0xe3, 0x7e, 0x71, 0xe3, 0x7e, 0x61, 0xe3, 0x7a, 0x0f, 0x2a, 0x2b, 0x7a, 0x1f, 0x2a, - 0x2f, 0x75, 0x31, 0x04, 0x12, 0x7c, 0x15, 0x7a, 0x01, 0x31, 0x12, 0x7c, 0x15, 0x7a, 0x11, 0x31, - 0x12, 0x7c, 0x15, 0x7a, 0x21, 0x31, 0x12, 0x7c, 0x15, 0x7a, 0x31, 0x31, 0x12, 0x7c, 0x15, 0x7a, - 0x41, 0x31, 0x12, 0x7c, 0x15, 0x7a, 0x51, 0x31, 0x12, 0x7c, 0x15, 0x7a, 0x61, 0x31, 0x12, 0x7c, - 0x15, 0x7a, 0x71, 0x31, 0x12, 0x7c, 0x15, 0xa9, 0xd4, 0xe4, 0xa9, 0xd7, 0xf4, 0xa9, 0xc6, 0xe2, - 0x12, 0x77, 0x94, 0x22, 0x6d, 0x00, 0x7e, 0x14, 0x01, 0x02, 0x7a, 0x07, 0x2a, 0x3a, 0x7a, 0x03, - 0x2a, 0x35, 0x7e, 0xb3, 0x2a, 0x2b, 0x20, 0xe7, 0x0f, 0x7a, 0x23, 0x2a, 0x34, 0x7a, 0x33, 0x2a, - 0x33, 0xbe, 0x07, 0x2a, 0x31, 0x68, 0x09, 0x22, 0x7a, 0x33, 0x2a, 0x34, 0x7a, 0x23, 0x2a, 0x33, - 0x7e, 0xb3, 0x2a, 0x2b, 0x54, 0xe3, 0x23, 0x23, 0x30, 0xe0, 0x02, 0xd2, 0xe5, 0x30, 0xe7, 0x02, - 0xd2, 0xe4, 0x30, 0xe5, 0x06, 0x30, 0xe4, 0x03, 0x02, 0x7b, 0x29, 0x54, 0x3e, 0xf5, 0xf0, 0x03, - 0x54, 0x1f, 0xc3, 0x25, 0xf0, 0x90, 0x77, 0xec, 0x75, 0x84, 0xff, 0x73, 0x02, 0x79, 0x40, 0x02, - 0x78, 0x34, 0x02, 0x79, 0xdd, 0x02, 0x79, 0xf8, 0x02, 0x78, 0xd9, 0x02, 0x78, 0x9a, 0x02, 0x7a, - 0x11, 0x02, 0x7a, 0x11, 0x02, 0x7a, 0x14, 0x02, 0x7a, 0x14, 0x02, 0x7a, 0x14, 0x02, 0x7a, 0x14, - 0x02, 0x7a, 0x14, 0x02, 0x7a, 0x14, 0x02, 0x7a, 0x14, 0x02, 0x7a, 0x14, 0x02, 0x7a, 0x1a, 0x02, - 0x7a, 0xce, 0x02, 0x7a, 0x17, 0x02, 0x7a, 0x17, 0x02, 0x7a, 0x17, 0x02, 0x7a, 0x17, 0x02, 0x7a, - 0x17, 0x02, 0x7a, 0x17, 0x7e, 0xb3, 0x2a, 0x2c, 0xb4, 0x06, 0x2a, 0x7e, 0xb3, 0x2a, 0x2d, 0x60, - 0x56, 0x7c, 0x0b, 0x7e, 0x13, 0x2a, 0x2e, 0x7e, 0x17, 0x2a, 0x2f, 0x75, 0x31, 0x72, 0x12, 0x7c, - 0x15, 0x7a, 0x01, 0x31, 0x12, 0x7c, 0x15, 0x7a, 0x11, 0x31, 0x12, 0x7c, 0x15, 0x12, 0x7b, 0x33, - 0x40, 0x35, 0x02, 0x76, 0x73, 0xb4, 0x08, 0x10, 0x75, 0x31, 0x74, 0x12, 0x7c, 0x15, 0x7e, 0xb3, - 0x3f, 0xf1, 0xf5, 0xf3, 0x75, 0xf6, 0x01, 0x22, 0xb4, 0x00, 0x1c, 0x75, 0x31, 0x75, 0x12, 0x7c, - 0x15, 0x7e, 0xb3, 0x3f, 0xf2, 0x30, 0xe0, 0x05, 0x75, 0xf3, 0x02, 0x80, 0x03, 0x75, 0xf3, 0x00, - 0x75, 0xf3, 0x00, 0x75, 0xf6, 0x02, 0x22, 0x02, 0x7b, 0x29, 0x7e, 0xb3, 0x2a, 0x2c, 0xb4, 0x00, - 0x35, 0x75, 0x31, 0x76, 0x12, 0x7c, 0x15, 0x7e, 0xb3, 0x2a, 0x30, 0x54, 0x0f, 0xf5, 0xf1, 0x7e, - 0xb3, 0x2a, 0x30, 0x20, 0xe7, 0x09, 0xe5, 0xe1, 0x30, 0xe7, 0x0d, 0x74, 0x01, 0x80, 0x0b, 0xe5, - 0xe1, 0x30, 0xe6, 0x04, 0x74, 0x01, 0x80, 0x02, 0x74, 0x00, 0x53, 0xf1, 0x80, 0xf5, 0xf3, 0x75, - 0xf3, 0x00, 0x75, 0xf6, 0x02, 0x22, 0x02, 0x7b, 0x29, 0xc0, 0xf1, 0x7e, 0xb3, 0x2a, 0x30, 0x54, - 0x0f, 0x42, 0xf1, 0x7e, 0xb3, 0x2a, 0x2e, 0xb4, 0x00, 0x45, 0x7e, 0xb3, 0x2a, 0x2c, 0xb4, 0x01, - 0x24, 0x75, 0x31, 0x77, 0x12, 0x7c, 0x15, 0x7e, 0xb3, 0x2a, 0x30, 0x54, 0x0f, 0x78, 0x05, 0x53, - 0xe1, 0x3f, 0x80, 0x37, 0x7e, 0xb3, 0x2a, 0x30, 0x20, 0xe7, 0x05, 0x53, 0xe1, 0x7f, 0x80, 0x2b, - 0x53, 0xe1, 0xbf, 0x80, 0x26, 0xb4, 0x03, 0x17, 0x75, 0x31, 0x78, 0x12, 0x7c, 0x15, 0x7e, 0xb3, - 0x2a, 0x30, 0x20, 0xe7, 0x05, 0x43, 0xe1, 0x80, 0x80, 0x11, 0x43, 0xe1, 0x40, 0x80, 0x0c, 0x43, - 0xe1, 0xc0, 0xd0, 0xf1, 0x75, 0x31, 0x07, 0x12, 0x7c, 0x15, 0x22, 0xd0, 0xf1, 0x02, 0x76, 0x6f, - 0x7e, 0xb3, 0x2a, 0x2c, 0xb4, 0x09, 0x23, 0x75, 0x31, 0x79, 0x12, 0x7c, 0x15, 0x7e, 0xb3, 0x2a, - 0x2e, 0xbe, 0xb3, 0x3f, 0xf1, 0x68, 0x11, 0xca, 0xb8, 0xc0, 0xf1, 0x12, 0x43, 0xd4, 0xd0, 0xf1, - 0xda, 0xb8, 0x50, 0x76, 0x7a, 0xb3, 0x3f, 0xf1, 0x80, 0x6d, 0xb4, 0x05, 0x08, 0x75, 0x31, 0x7a, - 0x12, 0x7c, 0x15, 0x80, 0x62, 0xb4, 0x03, 0x19, 0x75, 0x31, 0x7b, 0x12, 0x7c, 0x15, 0x7e, 0xb3, - 0x2a, 0x2e, 0xb4, 0x01, 0x55, 0x7e, 0xb3, 0x3f, 0xf2, 0x44, 0x01, 0x7a, 0xb3, 0x3f, 0xf2, 0x80, - 0x46, 0xb4, 0x01, 0x19, 0x75, 0x31, 0x7c, 0x12, 0x7c, 0x15, 0x7e, 0xb3, 0x2a, 0x2e, 0xb4, 0x01, - 0x39, 0x7e, 0xb3, 0x3f, 0xf2, 0x54, 0xfe, 0x7a, 0xb3, 0x3f, 0xf2, 0x80, 0x2a, 0xb4, 0x07, 0x2a, - 0x7e, 0xb3, 0x2a, 0x2d, 0x60, 0x24, 0x7c, 0x0b, 0x7e, 0x13, 0x2a, 0x2e, 0x7e, 0x17, 0x2a, 0x2f, - 0x75, 0x31, 0x73, 0x12, 0x7c, 0x15, 0x7a, 0x01, 0x31, 0x12, 0x7c, 0x15, 0x7a, 0x11, 0x31, 0x12, - 0x7c, 0x15, 0x12, 0x7b, 0x5f, 0x40, 0x03, 0x02, 0x76, 0x6f, 0x02, 0x7b, 0x29, 0x7e, 0xb3, 0x2a, - 0x2c, 0xb4, 0x0b, 0xf6, 0x75, 0x31, 0x7d, 0x12, 0x7c, 0x15, 0x7e, 0xb3, 0x2a, 0x2e, 0x7e, 0xa3, - 0x2a, 0x30, 0x4c, 0xab, 0x78, 0xe4, 0x80, 0xdf, 0x7e, 0xb3, 0x2a, 0x2c, 0xb4, 0x0a, 0xdb, 0x75, - 0x31, 0x7e, 0x12, 0x7c, 0x15, 0x7e, 0xb3, 0x2a, 0x2e, 0x70, 0xcf, 0xf5, 0xf3, 0x75, 0xf6, 0x01, - 0x22, 0x02, 0x7b, 0x29, 0x02, 0x7b, 0x29, 0x02, 0x7b, 0x29, 0x7e, 0xb3, 0x2a, 0x2c, 0xb4, 0x04, - 0x20, 0x75, 0x31, 0xc3, 0x12, 0x7c, 0x15, 0x7e, 0x04, 0x00, 0x01, 0x7e, 0x17, 0x2a, 0x2d, 0x7e, - 0x18, 0x2a, 0x3c, 0x7a, 0x1c, 0x00, 0x00, 0x7e, 0x47, 0x2a, 0x31, 0x12, 0x7c, 0x21, 0x02, 0x7a, - 0xc8, 0xb4, 0x06, 0x3a, 0x75, 0x31, 0xc1, 0x12, 0x7c, 0x15, 0x7e, 0x58, 0x00, 0x00, 0x7a, 0x5c, - 0x00, 0xfe, 0x7d, 0xca, 0x7e, 0xd7, 0x2a, 0x2d, 0x7e, 0x78, 0x2a, 0x3c, 0x7a, 0x7c, 0x00, 0x00, - 0x7e, 0x77, 0x2a, 0x31, 0x75, 0x31, 0xc1, 0x12, 0x7c, 0x15, 0xc0, 0xa8, 0xc0, 0x87, 0xc2, 0xaf, - 0xa9, 0xd5, 0x87, 0x12, 0x7c, 0x5a, 0xd0, 0x87, 0xd0, 0xa8, 0x40, 0x4f, 0x80, 0x4a, 0xb4, 0x00, - 0x1c, 0xc2, 0xaf, 0xa9, 0xd5, 0x87, 0x12, 0x76, 0x6f, 0xe4, 0x8d, 0xef, 0x8d, 0xef, 0x8d, 0xef, - 0xd5, 0xe0, 0xf7, 0xc0, 0xd1, 0xca, 0x02, 0xff, 0xca, 0x06, 0x00, 0x00, 0x32, 0xb4, 0x09, 0x12, - 0x7e, 0x57, 0x2a, 0x2d, 0x4d, 0x55, 0x68, 0x05, 0xa9, 0xd2, 0xb1, 0x80, 0x03, 0xa9, 0xc2, 0xb1, - 0x80, 0x16, 0xb4, 0x07, 0x16, 0xc2, 0xaf, 0x7e, 0x07, 0x2a, 0x2f, 0x7e, 0x17, 0x2a, 0x2d, 0xc0, - 0xd1, 0xca, 0x18, 0xca, 0x38, 0xca, 0x28, 0x32, 0x02, 0x76, 0x6f, 0x02, 0x7b, 0x29, 0x7e, 0xb3, - 0x2a, 0x2c, 0xb4, 0x03, 0x15, 0x75, 0x31, 0xc2, 0x12, 0x7c, 0x15, 0x7e, 0x04, 0x00, 0x01, 0x7e, - 0x17, 0x2a, 0x2d, 0x7e, 0x57, 0x2a, 0x31, 0x02, 0x76, 0x73, 0xb4, 0x05, 0x39, 0x75, 0x31, 0xc0, - 0x12, 0x7c, 0x15, 0xc0, 0xa8, 0xc0, 0x87, 0xc2, 0xaf, 0xa9, 0xd5, 0x87, 0x7e, 0x08, 0x2a, 0x3c, - 0x7a, 0x0c, 0x00, 0x00, 0x7e, 0x24, 0x00, 0xfe, 0x7e, 0x37, 0x2a, 0x2d, 0x7e, 0x47, 0x2a, 0x31, - 0x12, 0x7c, 0x21, 0xd0, 0x87, 0xd0, 0xa8, 0x7e, 0x08, 0x2a, 0x3c, 0x7a, 0x0c, 0x00, 0x00, 0x7e, - 0x57, 0x2a, 0x31, 0x02, 0x76, 0x73, 0x02, 0x7b, 0x29, 0x75, 0x31, 0x07, 0x12, 0x7c, 0x15, 0x43, - 0xe1, 0xc0, 0x22, 0xc0, 0xa8, 0xc0, 0x87, 0xc2, 0xaf, 0xa9, 0xd5, 0x87, 0x12, 0x7b, 0x9e, 0x40, - 0x19, 0x7e, 0x08, 0x2a, 0x3c, 0x7a, 0x0c, 0x00, 0x00, 0xca, 0x0b, 0xca, 0x49, 0x12, 0x7c, 0x21, - 0xda, 0x59, 0xda, 0x0b, 0xd0, 0x87, 0xd0, 0xa8, 0xc3, 0x22, 0xd0, 0x87, 0xd0, 0xa8, 0x22, 0xc0, - 0xa8, 0xc0, 0x87, 0xc2, 0xaf, 0xa9, 0xd5, 0x87, 0x12, 0x7b, 0x9e, 0x40, 0x2b, 0x7e, 0x58, 0x00, - 0x00, 0x7a, 0x5c, 0x00, 0xfe, 0x7f, 0x61, 0x7e, 0x78, 0x2a, 0x3c, 0x7a, 0x7c, 0x00, 0x00, 0x7e, - 0x77, 0x2a, 0x31, 0xbd, 0x74, 0x78, 0x11, 0x75, 0x31, 0xc1, 0x12, 0x7c, 0x15, 0x12, 0x7c, 0x5a, - 0x40, 0x06, 0xd0, 0x87, 0xd0, 0xa8, 0xc3, 0x22, 0xd0, 0x87, 0xd0, 0xa8, 0xd3, 0x22, 0x7e, 0x24, - 0x00, 0xfe, 0x7e, 0x34, 0x7f, 0xca, 0x0b, 0x1a, 0x50, 0xc5, 0xf0, 0x7d, 0x62, 0x7d, 0x75, 0x7d, - 0x87, 0x7e, 0x34, 0x7f, 0xc2, 0x7e, 0x1b, 0xb0, 0x7e, 0x34, 0x7f, 0x03, 0xb4, 0x01, 0x04, 0x7e, - 0x34, 0x7f, 0xcc, 0x7e, 0x1b, 0xb0, 0xbc, 0x0b, 0x50, 0x49, 0x3e, 0x00, 0x3e, 0x00, 0x0a, 0x50, - 0x2d, 0x75, 0x0b, 0x3a, 0x30, 0x69, 0x53, 0x00, 0x02, 0xbd, 0x38, 0x50, 0x02, 0x2d, 0x38, 0xbc, - 0x1b, 0x50, 0x30, 0x3e, 0x10, 0x3e, 0x10, 0x0a, 0x51, 0x2d, 0x35, 0x69, 0x41, 0x00, 0x02, 0x0b, - 0x1a, 0x30, 0xbd, 0x38, 0x50, 0x02, 0x2d, 0x38, 0xbe, 0x44, 0xff, 0xff, 0x78, 0x05, 0x7e, 0x1b, - 0x90, 0x0a, 0x49, 0x4d, 0x44, 0x68, 0x0c, 0xbe, 0x44, 0x00, 0xff, 0x28, 0x04, 0x7e, 0x44, 0x00, - 0xff, 0xc3, 0x22, 0xd3, 0x22, - -// Segment #16, Start Address 00ff7fc6, Length 4 -0xff,0x00,0xc6,0x7f,0x04,0x00, - 0x01, 0x10, 0x04, 0x00, - -// Segment #17, Start Address 00ff7c15, Length 330 -0xff,0x00,0x15,0x7c,0x4a,0x01, - 0xca, 0x08, 0x7e, 0x01, 0x31, 0x7a, 0x03, 0x3f, 0xf0, 0xda, 0x08, 0x22, 0x7e, 0x1b, 0xc0, 0x7a, - 0x0b, 0xc0, 0x0b, 0x14, 0x0b, 0x34, 0x1b, 0x44, 0x78, 0xf2, 0x22, 0x7f, 0x6f, 0x7f, 0xf0, 0x1b, - 0xfc, 0x7c, 0x54, 0x7d, 0x32, 0x80, 0x08, 0xca, 0x1b, 0xca, 0x1b, 0xca, 0x1b, 0xca, 0x1b, 0x9e, - 0x44, 0x00, 0x10, 0x50, 0xf2, 0x2e, 0x44, 0x00, 0x10, 0x68, 0x06, 0xca, 0x48, 0x1b, 0x44, 0x78, - 0xfa, 0x7f, 0xf6, 0x89, 0xe4, 0xca, 0x6b, 0x5e, 0xd4, 0x00, 0x3f, 0x68, 0x20, 0x7e, 0x84, 0x00, - 0x40, 0x9d, 0x8d, 0xda, 0x6b, 0xbd, 0x87, 0x38, 0x16, 0xca, 0x79, 0x7d, 0x78, 0x12, 0x7c, 0x84, - 0xda, 0x79, 0x40, 0x08, 0x9d, 0x78, 0x68, 0x02, 0x80, 0x05, 0xc2, 0xd7, 0x22, 0xda, 0x6b, 0x43, - 0x90, 0x30, 0x74, 0xaa, 0x39, 0xb5, 0x55, 0x55, 0x74, 0x55, 0x39, 0xb5, 0x2a, 0xaa, 0x74, 0xa0, - 0x39, 0xb5, 0x55, 0x55, 0x7e, 0x04, 0x00, 0x40, 0x9d, 0x70, 0x50, 0x06, 0x2d, 0x70, 0x7d, 0x07, - 0x6d, 0x77, 0x7c, 0x31, 0x7e, 0x7b, 0x00, 0x7a, 0x6b, 0x00, 0x0b, 0x7c, 0x0b, 0x6c, 0xa5, 0xd9, - 0xf3, 0x7f, 0x16, 0x1b, 0x1c, 0x7e, 0x54, 0x27, 0x10, 0x7e, 0x1b, 0x10, 0xbc, 0x10, 0x68, 0x06, - 0x1b, 0x54, 0x78, 0xf5, 0x80, 0x2c, 0x6d, 0x00, 0x7c, 0x20, 0x7f, 0x16, 0x9f, 0x10, 0x7f, 0x27, - 0x9f, 0x20, 0x7e, 0x2b, 0x00, 0x7e, 0x1b, 0x10, 0xbc, 0x01, 0x78, 0x16, 0x0b, 0x2c, 0x0b, 0x1c, - 0xa5, 0xdb, 0xef, 0x7c, 0xb6, 0x20, 0xe0, 0x03, 0x63, 0x90, 0x30, 0x4d, 0x77, 0x78, 0x93, 0xc2, - 0xd7, 0x22, 0xd2, 0xd7, 0x22, 0x00, 0x04, 0x00, 0x04, 0x42, 0x08, 0x06, 0x04, 0x02, 0x04, 0x00, - 0x02, 0x01, 0x04, 0x01, 0x02, 0x82, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, - 0x02, 0x02, 0x04, 0x02, 0x08, 0x10, 0x02, 0x10, 0x04, 0x02, 0x08, 0x00, 0x01, 0x01, 0x08, 0x00, - 0x01, 0x00, 0x02, 0x00, 0x02, 0x02, 0x08, 0x02, 0x04, 0x20, 0x04, 0x7e, 0x18, 0x7f, 0xbd, 0x7a, - 0x1c, 0x00, 0xfe, 0x0b, 0x1a, 0x00, 0x5e, 0x10, 0x1f, 0xbe, 0x10, 0x1a, 0x38, 0x1a, 0x0a, 0x51, - 0x23, 0x7e, 0x18, 0x7c, 0xfa, 0x7a, 0x1c, 0x00, 0xff, 0x2d, 0x35, 0x0b, 0x1a, 0x50, 0x60, 0x08, - 0xa5, 0xb8, 0x02, 0x03, 0x4e, 0xa0, 0x08, 0x22, 0x80, 0xfe, -}; - -static struct edge_firmware_version_info IMAGE_VERSION_NAME = { - 1, 16, 4 }; // Major, Minor, Build - -#undef IMAGE_VERSION_NAME - -#undef IMAGE_ARRAY_NAME - diff --git a/drivers/usb/serial/io_fw_down2.h b/drivers/usb/serial/io_fw_down2.h deleted file mode 100644 index 067277efd3b2..000000000000 --- a/drivers/usb/serial/io_fw_down2.h +++ /dev/null @@ -1,1133 +0,0 @@ -//************************************************************** -//* Edgeport/4 Binary Image -//* Generated by HEX2C v1.06 -//* Copyright (C) 1998 Inside Out Networks, All rights reserved. -//* This program is free software; you can redistribute it and/or modify -//* it under the terms of the GNU General Public License as published by -//* the Free Software Foundation; either version 2 of the License, or -//* (at your option) any later version. -//************************************************************** - - -//Image structure definition -#if !defined(DEFINED_EDGE_FIRMWARE_IMAGE_RECORD) - #define DEFINED_EDGE_FIRMWARE_IMAGE_RECORD - struct edge_firmware_image_record { - __le16 ExtAddr; - __le16 Addr; - __le16 Len; - unsigned char Data[0]; - } __attribute__ ((packed)); - - struct edge_firmware_version_info { - unsigned char MajorVersion; - unsigned char MinorVersion; - unsigned short BuildNumber; - }; - -#endif - -#if !defined(IMAGE_ARRAY_NAME) - #define IMAGE_ARRAY_NAME FirmwareImage - #define IMAGE_VERSION_NAME FirmwareImageVersion -#endif - -static unsigned char IMAGE_ARRAY_NAME[] = { - -// Segment #1, Start Address 00ff0000, Length 6 -0xff,0x00,0x00,0x00,0x06,0x00, - 0x02, 0x00, 0x80, 0x02, 0x45, 0x14, - -// Segment #2, Start Address 00ff000b, Length 3 -0xff,0x00,0x0b,0x00,0x03,0x00, - 0x02, 0x44, 0xa5, - -// Segment #3, Start Address 00ff0013, Length 3 -0xff,0x00,0x13,0x00,0x03,0x00, - 0x02, 0x63, 0xab, - -// Segment #4, Start Address 00ff001b, Length 3 -0xff,0x00,0x1b,0x00,0x03,0x00, - 0x02, 0x00, 0x1b, - -// Segment #5, Start Address 00ff0023, Length 3 -0xff,0x00,0x23,0x00,0x03,0x00, - 0x02, 0x00, 0x23, - -// Segment #6, Start Address 00ff002b, Length 3 -0xff,0x00,0x2b,0x00,0x03,0x00, - 0x02, 0x00, 0x2b, - -// Segment #7, Start Address 00ff0033, Length 3 -0xff,0x00,0x33,0x00,0x03,0x00, - 0x02, 0x00, 0x33, - -// Segment #8, Start Address 00ff003b, Length 3 -0xff,0x00,0x3b,0x00,0x03,0x00, - 0x02, 0x00, 0x3b, - -// Segment #9, Start Address 00ff0043, Length 3 -0xff,0x00,0x43,0x00,0x03,0x00, - 0x02, 0x00, 0x43, - -// Segment #10, Start Address 00ff004b, Length 3 -0xff,0x00,0x4b,0x00,0x03,0x00, - 0x02, 0x00, 0x4b, - -// Segment #11, Start Address 00ff0053, Length 3 -0xff,0x00,0x53,0x00,0x03,0x00, - 0x02, 0x67, 0x5f, - -// Segment #12, Start Address 00ff007b, Length 3 -0xff,0x00,0x7b,0x00,0x03,0x00, - 0x02, 0x00, 0x7b, - -// Segment #13, Start Address 00ff0080, Length 7 -0xff,0x00,0x80,0x00,0x07,0x00, - 0x7e, 0x14, 0x00, 0x00, 0x02, 0x40, 0x52, - -// Segment #14, Start Address 00ff3000, Length 2918 -0xff,0x00,0x00,0x30,0x66,0x0b, - 0x12, 0x30, 0x64, 0x12, 0x30, 0xff, 0x12, 0x31, 0x2f, 0x12, 0x30, 0xb0, 0x80, 0xf2, 0xe5, 0x23, - 0x60, 0x19, 0x7e, 0x14, 0x00, 0x00, 0x09, 0xb1, 0x01, 0xb9, 0xb4, 0x00, 0x02, 0x80, 0x05, 0x14, - 0x19, 0xb1, 0x01, 0xb9, 0xa5, 0x0a, 0xbe, 0x21, 0x2e, 0x78, 0xeb, 0x22, 0xc2, 0xaf, 0x7e, 0xb3, - 0x3f, 0xf1, 0xb4, 0x01, 0x03, 0x12, 0x65, 0x67, 0xd2, 0xaf, 0x22, 0xc2, 0xaf, 0x7e, 0xb3, 0x3f, - 0xf1, 0xb4, 0x01, 0x1d, 0x74, 0x40, 0x7a, 0xb3, 0x91, 0x00, 0x7e, 0xb3, 0x91, 0x1a, 0x6c, 0xaa, - 0x60, 0x0f, 0xca, 0x0b, 0xca, 0x39, 0xca, 0x59, 0x12, 0x64, 0x24, 0xda, 0x59, 0xda, 0x39, 0xda, - 0x0b, 0xd2, 0xaf, 0x22, 0xc2, 0xaf, 0xe5, 0x22, 0x60, 0x43, 0x7e, 0x07, 0x01, 0xcb, 0xbe, 0x04, - 0x03, 0x80, 0x38, 0x39, 0x7e, 0x04, 0x80, 0x00, 0x7e, 0x20, 0x00, 0x13, 0x50, 0x21, 0x09, 0xa0, - 0x00, 0x04, 0x4e, 0xa0, 0x05, 0x19, 0xa0, 0x00, 0x04, 0x0a, 0x32, 0x09, 0x53, 0x35, 0x33, 0x5e, - 0x51, 0x27, 0x68, 0x0b, 0x09, 0xa0, 0x00, 0x10, 0x4e, 0xa0, 0x01, 0x19, 0xa0, 0x00, 0x10, 0x2e, - 0x04, 0x01, 0x00, 0xa5, 0x0a, 0xbe, 0x21, 0x2e, 0x78, 0xd1, 0x75, 0x22, 0x00, 0xd2, 0xaf, 0x22, - 0xc2, 0xaf, 0xe5, 0x26, 0x60, 0x36, 0x7e, 0x20, 0x00, 0x7e, 0x30, 0x01, 0xe5, 0x26, 0xa5, 0x5b, - 0x68, 0x21, 0x7c, 0xb2, 0x23, 0x0a, 0x2b, 0x49, 0x32, 0x01, 0x79, 0xbe, 0x34, 0x00, 0x00, 0x68, - 0x12, 0x7e, 0xb1, 0x21, 0xa5, 0x4b, 0x7a, 0xb1, 0x21, 0xca, 0x19, 0x49, 0x22, 0x30, 0xef, 0x99, - 0x24, 0xda, 0x19, 0x3e, 0x30, 0xa5, 0x0a, 0xbe, 0x21, 0x2e, 0x78, 0xd0, 0xd2, 0xaf, 0x22, 0x46, - 0x4f, 0x49, 0x7c, 0x4c, 0xa9, 0x4f, 0xd6, 0x53, 0x03, 0x56, 0x30, 0x59, 0x5d, 0x5c, 0x8a, 0xc2, - 0xaf, 0xe5, 0x24, 0x60, 0x14, 0x7e, 0x20, 0x00, 0x13, 0x50, 0x07, 0xca, 0xb8, 0x12, 0x31, 0x1c, - 0xda, 0xb8, 0xa5, 0x0a, 0xbe, 0x21, 0x2e, 0x78, 0xef, 0xd2, 0xaf, 0x22, 0xca, 0x28, 0x12, 0x35, - 0x4c, 0xda, 0x28, 0x40, 0x09, 0x0a, 0x22, 0x09, 0xb2, 0x35, 0x33, 0xf4, 0x52, 0x24, 0x22, 0xc2, - 0xaf, 0xe5, 0x23, 0x60, 0x14, 0x7e, 0x20, 0x00, 0x13, 0x50, 0x07, 0xca, 0xb8, 0x12, 0x31, 0x4c, - 0xda, 0xb8, 0xa5, 0x0a, 0xbe, 0x21, 0x2e, 0x78, 0xef, 0xd2, 0xaf, 0x22, 0x7c, 0xb2, 0x23, 0x0a, - 0x2b, 0x49, 0x22, 0x31, 0x57, 0x89, 0x24, 0x31, 0x67, 0x31, 0xd0, 0x32, 0x39, 0x32, 0xa2, 0x33, - 0x0b, 0x33, 0x74, 0x33, 0xdd, 0x34, 0x46, 0x7e, 0x27, 0x01, 0x79, 0xbe, 0x24, 0x00, 0x00, 0x78, - 0x24, 0x7e, 0x24, 0x80, 0x00, 0x09, 0xb2, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, - 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x49, 0x45, 0x7d, 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, - 0x7e, 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, 0x01, 0x89, 0x68, 0x0d, 0x7a, 0x27, 0x01, 0x89, 0x7e, - 0x60, 0x9c, 0x7a, 0x63, 0x01, 0xb9, 0x80, 0x27, 0x7e, 0x63, 0x01, 0xb9, 0xa5, 0xbe, 0x00, 0x1f, - 0x7e, 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, 0xa0, 0xc8, 0x12, 0x61, 0x36, 0x40, 0x11, 0x75, 0x2f, - 0xb3, 0x12, 0x73, 0x35, 0xc2, 0x18, 0x6c, 0x00, 0x7a, 0x03, 0x01, 0xb9, 0x12, 0x64, 0x86, 0x22, - 0x7e, 0x27, 0x01, 0x7b, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x24, 0x7e, 0x24, 0x81, 0x00, 0x09, 0xb2, - 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, - 0x4c, 0x72, 0x7d, 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, 0x7e, 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, - 0x01, 0x8b, 0x68, 0x0d, 0x7a, 0x27, 0x01, 0x8b, 0x7e, 0x60, 0x9c, 0x7a, 0x63, 0x01, 0xba, 0x80, - 0x27, 0x7e, 0x63, 0x01, 0xba, 0xa5, 0xbe, 0x00, 0x1f, 0x7e, 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, - 0xa0, 0xc8, 0x12, 0x61, 0x36, 0x40, 0x11, 0x75, 0x2f, 0xb3, 0x12, 0x73, 0x35, 0xc2, 0x19, 0x6c, - 0x00, 0x7a, 0x03, 0x01, 0xba, 0x12, 0x64, 0x86, 0x22, 0x7e, 0x27, 0x01, 0x7d, 0xbe, 0x24, 0x00, - 0x00, 0x78, 0x24, 0x7e, 0x24, 0x82, 0x00, 0x09, 0xb2, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, - 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x4f, 0x9f, 0x7d, 0x21, 0xda, 0x19, 0x30, - 0xe6, 0x18, 0x7e, 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, 0x01, 0x8d, 0x68, 0x0d, 0x7a, 0x27, 0x01, - 0x8d, 0x7e, 0x60, 0x9c, 0x7a, 0x63, 0x01, 0xbb, 0x80, 0x27, 0x7e, 0x63, 0x01, 0xbb, 0xa5, 0xbe, - 0x00, 0x1f, 0x7e, 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, 0xa0, 0xc8, 0x12, 0x61, 0x36, 0x40, 0x11, - 0x75, 0x2f, 0xb3, 0x12, 0x73, 0x35, 0xc2, 0x1a, 0x6c, 0x00, 0x7a, 0x03, 0x01, 0xbb, 0x12, 0x64, - 0x86, 0x22, 0x7e, 0x27, 0x01, 0x7f, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x24, 0x7e, 0x24, 0x83, 0x00, - 0x09, 0xb2, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, - 0x12, 0x12, 0x52, 0xcc, 0x7d, 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, 0x7e, 0x60, 0x00, 0x80, 0x1e, - 0xbe, 0x27, 0x01, 0x8f, 0x68, 0x0d, 0x7a, 0x27, 0x01, 0x8f, 0x7e, 0x60, 0x9c, 0x7a, 0x63, 0x01, - 0xbc, 0x80, 0x27, 0x7e, 0x63, 0x01, 0xbc, 0xa5, 0xbe, 0x00, 0x1f, 0x7e, 0x60, 0x01, 0x7e, 0xb0, - 0x00, 0x7e, 0xa0, 0xc8, 0x12, 0x61, 0x36, 0x40, 0x11, 0x75, 0x2f, 0xb3, 0x12, 0x73, 0x35, 0xc2, - 0x1b, 0x6c, 0x00, 0x7a, 0x03, 0x01, 0xbc, 0x12, 0x64, 0x86, 0x22, 0x7e, 0x27, 0x01, 0x81, 0xbe, - 0x24, 0x00, 0x00, 0x78, 0x24, 0x7e, 0x24, 0x84, 0x00, 0x09, 0xb2, 0x00, 0x14, 0xca, 0xb8, 0x5e, - 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x55, 0xf9, 0x7d, 0x21, 0xda, - 0x19, 0x30, 0xe6, 0x18, 0x7e, 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, 0x01, 0x91, 0x68, 0x0d, 0x7a, - 0x27, 0x01, 0x91, 0x7e, 0x60, 0x9c, 0x7a, 0x63, 0x01, 0xbd, 0x80, 0x27, 0x7e, 0x63, 0x01, 0xbd, - 0xa5, 0xbe, 0x00, 0x1f, 0x7e, 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, 0xa0, 0xc8, 0x12, 0x61, 0x36, - 0x40, 0x11, 0x75, 0x2f, 0xb3, 0x12, 0x73, 0x35, 0xc2, 0x1c, 0x6c, 0x00, 0x7a, 0x03, 0x01, 0xbd, - 0x12, 0x64, 0x86, 0x22, 0x7e, 0x27, 0x01, 0x83, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x24, 0x7e, 0x24, - 0x85, 0x00, 0x09, 0xb2, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, - 0x19, 0x7d, 0x12, 0x12, 0x59, 0x26, 0x7d, 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, 0x7e, 0x60, 0x00, - 0x80, 0x1e, 0xbe, 0x27, 0x01, 0x93, 0x68, 0x0d, 0x7a, 0x27, 0x01, 0x93, 0x7e, 0x60, 0x9c, 0x7a, - 0x63, 0x01, 0xbe, 0x80, 0x27, 0x7e, 0x63, 0x01, 0xbe, 0xa5, 0xbe, 0x00, 0x1f, 0x7e, 0x60, 0x01, - 0x7e, 0xb0, 0x00, 0x7e, 0xa0, 0xc8, 0x12, 0x61, 0x36, 0x40, 0x11, 0x75, 0x2f, 0xb3, 0x12, 0x73, - 0x35, 0xc2, 0x1d, 0x6c, 0x00, 0x7a, 0x03, 0x01, 0xbe, 0x12, 0x64, 0x86, 0x22, 0x7e, 0x27, 0x01, - 0x85, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x24, 0x7e, 0x24, 0x86, 0x00, 0x09, 0xb2, 0x00, 0x14, 0xca, - 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x5c, 0x53, 0x7d, - 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, 0x7e, 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, 0x01, 0x95, 0x68, - 0x0d, 0x7a, 0x27, 0x01, 0x95, 0x7e, 0x60, 0x9c, 0x7a, 0x63, 0x01, 0xbf, 0x80, 0x27, 0x7e, 0x63, - 0x01, 0xbf, 0xa5, 0xbe, 0x00, 0x1f, 0x7e, 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, 0xa0, 0xc8, 0x12, - 0x61, 0x36, 0x40, 0x11, 0x75, 0x2f, 0xb3, 0x12, 0x73, 0x35, 0xc2, 0x1e, 0x6c, 0x00, 0x7a, 0x03, - 0x01, 0xbf, 0x12, 0x64, 0x86, 0x22, 0x7e, 0x27, 0x01, 0x87, 0xbe, 0x24, 0x00, 0x00, 0x78, 0x24, - 0x7e, 0x24, 0x87, 0x00, 0x09, 0xb2, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, - 0x0b, 0xca, 0x19, 0x7d, 0x12, 0x12, 0x5f, 0x80, 0x7d, 0x21, 0xda, 0x19, 0x30, 0xe6, 0x18, 0x7e, - 0x60, 0x00, 0x80, 0x1e, 0xbe, 0x27, 0x01, 0x97, 0x68, 0x0d, 0x7a, 0x27, 0x01, 0x97, 0x7e, 0x60, - 0x9c, 0x7a, 0x63, 0x01, 0xc0, 0x80, 0x27, 0x7e, 0x63, 0x01, 0xc0, 0xa5, 0xbe, 0x00, 0x1f, 0x7e, - 0x60, 0x01, 0x7e, 0xb0, 0x00, 0x7e, 0xa0, 0xc8, 0x12, 0x61, 0x36, 0x40, 0x11, 0x75, 0x2f, 0xb3, - 0x12, 0x73, 0x35, 0xc2, 0x1f, 0x6c, 0x00, 0x7a, 0x03, 0x01, 0xc0, 0x12, 0x64, 0x86, 0x22, 0xc2, - 0xaf, 0x7e, 0x07, 0x01, 0xcb, 0xbe, 0x04, 0x00, 0x00, 0x78, 0x28, 0x74, 0x20, 0x7a, 0xb3, 0x91, - 0x00, 0x7e, 0xb3, 0x91, 0x15, 0x30, 0xe5, 0x1b, 0x7e, 0xb3, 0x91, 0x1a, 0xbe, 0xb0, 0x3f, 0x38, - 0x0c, 0x85, 0x31, 0x2f, 0x12, 0x73, 0x35, 0x74, 0x80, 0x7a, 0xb3, 0x91, 0x1e, 0x74, 0x20, 0x7a, - 0xb3, 0x91, 0x15, 0xd2, 0xaf, 0x22, 0x35, 0x3b, 0x36, 0xe8, 0x37, 0x00, 0x37, 0x1b, 0x37, 0xb6, - 0x38, 0x4e, 0x38, 0x69, 0x38, 0xfb, 0x38, 0x84, 0x38, 0xc5, 0x7c, 0xb3, 0xbe, 0xb0, 0x09, 0x28, - 0x22, 0x75, 0x2f, 0x09, 0x12, 0x73, 0x35, 0x75, 0x57, 0x02, 0x74, 0x20, 0x7a, 0xb3, 0x91, 0x00, - 0x74, 0x01, 0x7a, 0xb3, 0x91, 0x11, 0x74, 0x40, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x01, 0x7a, 0xb3, - 0x91, 0x11, 0x22, 0xc0, 0xa8, 0xc2, 0xaf, 0x23, 0x6c, 0xaa, 0x2e, 0x54, 0x34, 0xe6, 0x0b, 0x58, - 0x50, 0x89, 0x54, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x75, 0x2f, 0xb0, 0x12, 0x73, - 0x35, 0x0a, 0x22, 0x09, 0xb2, 0x35, 0x33, 0x42, 0x24, 0xd0, 0xa8, 0x22, 0x7c, 0xb2, 0x23, 0x0a, - 0x3b, 0x49, 0x33, 0x35, 0x57, 0x89, 0x34, 0x35, 0x67, 0x35, 0x95, 0x35, 0xc3, 0x35, 0xf1, 0x36, - 0x1f, 0x36, 0x4d, 0x36, 0x7b, 0x36, 0xa9, 0x12, 0x41, 0xba, 0xd2, 0x28, 0xd2, 0x08, 0xc2, 0x40, - 0xc2, 0x48, 0xc2, 0x38, 0xc2, 0x30, 0x6d, 0x00, 0x7a, 0x03, 0x01, 0xb9, 0x7e, 0x04, 0x00, 0x20, - 0x7a, 0x07, 0x01, 0x99, 0x7e, 0x04, 0x00, 0x38, 0x7a, 0x07, 0x01, 0xa9, 0x12, 0x41, 0x27, 0x12, - 0x5f, 0xb7, 0x02, 0x36, 0xd7, 0x12, 0x41, 0xd7, 0xd2, 0x29, 0xd2, 0x09, 0xc2, 0x41, 0xc2, 0x49, - 0xc2, 0x39, 0xc2, 0x31, 0x6d, 0x00, 0x7a, 0x03, 0x01, 0xba, 0x7e, 0x04, 0x00, 0x20, 0x7a, 0x07, - 0x01, 0x9b, 0x7e, 0x04, 0x00, 0x38, 0x7a, 0x07, 0x01, 0xab, 0x12, 0x41, 0x27, 0x12, 0x5f, 0xe0, - 0x02, 0x36, 0xd7, 0x12, 0x41, 0xf4, 0xd2, 0x2a, 0xd2, 0x0a, 0xc2, 0x42, 0xc2, 0x4a, 0xc2, 0x3a, - 0xc2, 0x32, 0x6d, 0x00, 0x7a, 0x03, 0x01, 0xbb, 0x7e, 0x04, 0x00, 0x20, 0x7a, 0x07, 0x01, 0x9d, - 0x7e, 0x04, 0x00, 0x38, 0x7a, 0x07, 0x01, 0xad, 0x12, 0x41, 0x27, 0x12, 0x60, 0x09, 0x02, 0x36, - 0xd7, 0x12, 0x42, 0x11, 0xd2, 0x2b, 0xd2, 0x0b, 0xc2, 0x43, 0xc2, 0x4b, 0xc2, 0x3b, 0xc2, 0x33, - 0x6d, 0x00, 0x7a, 0x03, 0x01, 0xbc, 0x7e, 0x04, 0x00, 0x20, 0x7a, 0x07, 0x01, 0x9f, 0x7e, 0x04, - 0x00, 0x38, 0x7a, 0x07, 0x01, 0xaf, 0x12, 0x41, 0x27, 0x12, 0x60, 0x32, 0x02, 0x36, 0xd7, 0x12, - 0x42, 0x2e, 0xd2, 0x2c, 0xd2, 0x0c, 0xc2, 0x44, 0xc2, 0x4c, 0xc2, 0x3c, 0xc2, 0x34, 0x6d, 0x00, - 0x7a, 0x03, 0x01, 0xbd, 0x7e, 0x04, 0x00, 0x20, 0x7a, 0x07, 0x01, 0xa1, 0x7e, 0x04, 0x00, 0x38, - 0x7a, 0x07, 0x01, 0xb1, 0x12, 0x41, 0x27, 0x12, 0x60, 0x5b, 0x02, 0x36, 0xd7, 0x12, 0x42, 0x4b, - 0xd2, 0x2d, 0xd2, 0x0d, 0xc2, 0x45, 0xc2, 0x4d, 0xc2, 0x3d, 0xc2, 0x35, 0x6d, 0x00, 0x7a, 0x03, - 0x01, 0xbe, 0x7e, 0x04, 0x00, 0x20, 0x7a, 0x07, 0x01, 0xa3, 0x7e, 0x04, 0x00, 0x38, 0x7a, 0x07, - 0x01, 0xb3, 0x12, 0x41, 0x27, 0x12, 0x60, 0x84, 0x02, 0x36, 0xd7, 0x12, 0x42, 0x68, 0xd2, 0x2e, - 0xd2, 0x0e, 0xc2, 0x46, 0xc2, 0x4e, 0xc2, 0x3e, 0xc2, 0x36, 0x6d, 0x00, 0x7a, 0x03, 0x01, 0xbf, - 0x7e, 0x04, 0x00, 0x20, 0x7a, 0x07, 0x01, 0xa5, 0x7e, 0x04, 0x00, 0x38, 0x7a, 0x07, 0x01, 0xb5, - 0x12, 0x41, 0x27, 0x12, 0x60, 0xad, 0x02, 0x36, 0xd7, 0x12, 0x42, 0x85, 0xd2, 0x2f, 0xd2, 0x0f, - 0xc2, 0x47, 0xc2, 0x4f, 0xc2, 0x3f, 0xc2, 0x37, 0x6d, 0x00, 0x7a, 0x03, 0x01, 0xc0, 0x7e, 0x04, - 0x00, 0x20, 0x7a, 0x07, 0x01, 0xa7, 0x7e, 0x04, 0x00, 0x38, 0x7a, 0x07, 0x01, 0xb7, 0x12, 0x41, - 0x27, 0x12, 0x60, 0xd6, 0x02, 0x36, 0xd7, 0x7e, 0xa0, 0xd0, 0x7e, 0x60, 0x0f, 0x12, 0x61, 0x36, - 0x40, 0x05, 0x12, 0x64, 0x86, 0xc2, 0xd7, 0x22, 0x75, 0x2f, 0xb1, 0x12, 0x73, 0x35, 0x0a, 0x52, - 0x23, 0x6d, 0x00, 0x59, 0x05, 0x00, 0x32, 0x12, 0x41, 0x83, 0x12, 0x41, 0x9f, 0xd0, 0xa8, 0x22, - 0x75, 0x2f, 0xb2, 0x12, 0x73, 0x35, 0x0a, 0x22, 0x09, 0xb2, 0x35, 0x33, 0x42, 0x23, 0x7e, 0xb0, - 0x9c, 0x19, 0xb2, 0x01, 0xb9, 0x12, 0x31, 0x4c, 0xd0, 0xa8, 0x22, 0x7e, 0x04, 0x80, 0x00, 0x4c, - 0x02, 0x09, 0x30, 0x00, 0x0c, 0x74, 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0x09, 0xb0, 0x00, 0x08, 0x19, - 0x30, 0x00, 0x0c, 0x7c, 0x74, 0x5e, 0x70, 0x01, 0x68, 0x12, 0x44, 0x40, 0xca, 0xb8, 0x09, 0xb0, - 0x00, 0x10, 0x44, 0x02, 0x19, 0xb0, 0x00, 0x10, 0xda, 0xb8, 0x80, 0x02, 0x54, 0xbf, 0x7c, 0x74, - 0x5e, 0x70, 0x08, 0x68, 0x04, 0x44, 0x08, 0x80, 0x02, 0x54, 0xf7, 0x09, 0x30, 0x00, 0x0c, 0xca, - 0xb8, 0x74, 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0xda, 0xb8, 0x19, 0xb0, 0x00, 0x08, 0x19, 0x30, 0x00, - 0x0c, 0x0a, 0x62, 0x09, 0xb6, 0x35, 0x33, 0x3e, 0x20, 0x0a, 0x62, 0x7c, 0x74, 0x5e, 0x70, 0x02, - 0x68, 0x20, 0x42, 0x27, 0xca, 0xb8, 0x74, 0x61, 0x19, 0xb0, 0x00, 0x08, 0x7e, 0x44, 0x00, 0x10, - 0x59, 0x46, 0x01, 0xa9, 0x09, 0xb0, 0x00, 0x10, 0x44, 0x01, 0x19, 0xb0, 0x00, 0x10, 0xda, 0xb8, - 0x80, 0x11, 0xf4, 0x52, 0x27, 0x74, 0xa1, 0x19, 0xb0, 0x00, 0x08, 0x7e, 0x44, 0x00, 0x38, 0x59, - 0x46, 0x01, 0xa9, 0xd0, 0xa8, 0x22, 0x7c, 0x74, 0x7e, 0x04, 0x80, 0x00, 0x4c, 0x02, 0x09, 0x30, - 0x00, 0x0c, 0x74, 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0x09, 0xb0, 0x00, 0x08, 0x7c, 0x74, 0x5e, 0x70, - 0x01, 0x68, 0x04, 0x44, 0x80, 0x80, 0x02, 0x54, 0x7f, 0x7c, 0x74, 0x5e, 0x70, 0x08, 0x68, 0x04, - 0x44, 0x02, 0x80, 0x02, 0x54, 0xfd, 0x19, 0xb0, 0x00, 0x08, 0x19, 0x30, 0x00, 0x0c, 0x0a, 0x62, - 0x09, 0xb6, 0x35, 0x33, 0xa5, 0xfd, 0xf4, 0xa5, 0xfe, 0xca, 0x28, 0x3e, 0x20, 0x0a, 0x62, 0xda, - 0x28, 0x7c, 0x74, 0x5e, 0x70, 0x02, 0x68, 0x10, 0xa5, 0xed, 0x42, 0x28, 0x42, 0x26, 0x7e, 0x44, - 0x00, 0x08, 0x59, 0x46, 0x01, 0x99, 0x80, 0x04, 0xa5, 0xee, 0x52, 0x28, 0x7c, 0x74, 0x5e, 0x70, - 0x04, 0x68, 0x10, 0xa5, 0xed, 0x42, 0x29, 0x42, 0x26, 0x7e, 0x44, 0x00, 0x08, 0x59, 0x46, 0x01, - 0x99, 0x80, 0x15, 0xa5, 0xee, 0x52, 0x29, 0x7c, 0x74, 0x5e, 0x70, 0x02, 0x78, 0x0a, 0x52, 0x26, - 0x7e, 0x44, 0x00, 0x20, 0x59, 0x46, 0x01, 0x99, 0x12, 0x42, 0xa2, 0xd0, 0xa8, 0x22, 0x7e, 0x04, - 0x80, 0x00, 0x4c, 0x02, 0x09, 0x30, 0x00, 0x0c, 0x74, 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0x19, 0x40, - 0x00, 0x10, 0x19, 0x30, 0x00, 0x0c, 0xd0, 0xa8, 0x22, 0x7e, 0x04, 0x80, 0x00, 0x4c, 0x02, 0x09, - 0x30, 0x00, 0x0c, 0x74, 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0x19, 0x40, 0x00, 0x18, 0x19, 0x30, 0x00, - 0x0c, 0xd0, 0xa8, 0x22, 0x75, 0x2f, 0xb5, 0x12, 0x73, 0x35, 0x7e, 0x04, 0x80, 0x00, 0x4c, 0x02, - 0x09, 0xb0, 0x00, 0x0c, 0x44, 0x40, 0x19, 0xb0, 0x00, 0x0c, 0xe5, 0x58, 0xb4, 0x07, 0x23, 0x09, - 0xb0, 0x00, 0x10, 0x4e, 0xb0, 0x02, 0x19, 0xb0, 0x00, 0x10, 0x09, 0x30, 0x00, 0x0c, 0x74, 0xbf, - 0x19, 0xb0, 0x00, 0x0c, 0x09, 0xb0, 0x00, 0x04, 0x54, 0xf7, 0x19, 0xb0, 0x00, 0x04, 0x19, 0x30, - 0x00, 0x0c, 0xd0, 0xa8, 0x22, 0x75, 0x2f, 0xb6, 0x12, 0x73, 0x35, 0x7e, 0x04, 0x80, 0x00, 0x4c, - 0x02, 0xe5, 0x58, 0xb4, 0x07, 0x18, 0x09, 0x30, 0x00, 0x0c, 0x74, 0xbf, 0x19, 0xb0, 0x00, 0x0c, - 0x09, 0xb0, 0x00, 0x04, 0x44, 0x08, 0x19, 0xb0, 0x00, 0x04, 0x19, 0x30, 0x00, 0x0c, 0x09, 0xb0, - 0x00, 0x0c, 0x54, 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0xd0, 0xa8, 0x22, 0x75, 0x2f, 0xb4, 0x12, 0x73, - 0x35, 0x7a, 0x21, 0x2f, 0x12, 0x73, 0x35, 0x7a, 0x41, 0x2f, 0x12, 0x73, 0x35, 0x7e, 0xb0, 0x01, - 0x7e, 0xa0, 0xc8, 0x7c, 0x64, 0x12, 0x61, 0x36, 0x12, 0x64, 0x86, 0xd0, 0xa8, 0x22, 0x39, 0x2e, - 0x39, 0x75, 0x39, 0xbc, 0x3a, 0x03, 0x3a, 0x4a, 0x3a, 0x91, 0x3a, 0xd8, 0x3b, 0x1f, 0x75, 0x2f, - 0x55, 0x12, 0x73, 0x35, 0x75, 0x2f, 0x00, 0x12, 0x73, 0x35, 0x7a, 0x61, 0x2f, 0x12, 0x73, 0x35, - 0x7a, 0x71, 0x2f, 0x12, 0x73, 0x35, 0x7e, 0x17, 0x01, 0x69, 0x7e, 0x27, 0x01, 0x79, 0x2d, 0x23, - 0x7e, 0x09, 0xb0, 0x0b, 0x04, 0x7a, 0x19, 0xb0, 0x0b, 0x14, 0xbe, 0x14, 0x08, 0x2c, 0x38, 0x0f, - 0x1b, 0x34, 0x78, 0xec, 0x7a, 0x17, 0x01, 0x69, 0x7a, 0x27, 0x01, 0x79, 0x02, 0x46, 0x4f, 0x7e, - 0x14, 0x04, 0x2d, 0x80, 0xeb, 0x75, 0x2f, 0x55, 0x12, 0x73, 0x35, 0x75, 0x2f, 0x01, 0x12, 0x73, - 0x35, 0x7a, 0x61, 0x2f, 0x12, 0x73, 0x35, 0x7a, 0x71, 0x2f, 0x12, 0x73, 0x35, 0x7e, 0x17, 0x01, - 0x6b, 0x7e, 0x27, 0x01, 0x7b, 0x2d, 0x23, 0x7e, 0x09, 0xb0, 0x0b, 0x04, 0x7a, 0x19, 0xb0, 0x0b, - 0x14, 0xbe, 0x14, 0x0c, 0x2c, 0x38, 0x0f, 0x1b, 0x34, 0x78, 0xec, 0x7a, 0x17, 0x01, 0x6b, 0x7a, - 0x27, 0x01, 0x7b, 0x02, 0x49, 0x7c, 0x7e, 0x14, 0x08, 0x2d, 0x80, 0xeb, 0x75, 0x2f, 0x55, 0x12, - 0x73, 0x35, 0x75, 0x2f, 0x02, 0x12, 0x73, 0x35, 0x7a, 0x61, 0x2f, 0x12, 0x73, 0x35, 0x7a, 0x71, - 0x2f, 0x12, 0x73, 0x35, 0x7e, 0x17, 0x01, 0x6d, 0x7e, 0x27, 0x01, 0x7d, 0x2d, 0x23, 0x7e, 0x09, - 0xb0, 0x0b, 0x04, 0x7a, 0x19, 0xb0, 0x0b, 0x14, 0xbe, 0x14, 0x10, 0x2c, 0x38, 0x0f, 0x1b, 0x34, - 0x78, 0xec, 0x7a, 0x17, 0x01, 0x6d, 0x7a, 0x27, 0x01, 0x7d, 0x02, 0x4c, 0xa9, 0x7e, 0x14, 0x0c, - 0x2d, 0x80, 0xeb, 0x75, 0x2f, 0x55, 0x12, 0x73, 0x35, 0x75, 0x2f, 0x03, 0x12, 0x73, 0x35, 0x7a, - 0x61, 0x2f, 0x12, 0x73, 0x35, 0x7a, 0x71, 0x2f, 0x12, 0x73, 0x35, 0x7e, 0x17, 0x01, 0x6f, 0x7e, - 0x27, 0x01, 0x7f, 0x2d, 0x23, 0x7e, 0x09, 0xb0, 0x0b, 0x04, 0x7a, 0x19, 0xb0, 0x0b, 0x14, 0xbe, - 0x14, 0x14, 0x2c, 0x38, 0x0f, 0x1b, 0x34, 0x78, 0xec, 0x7a, 0x17, 0x01, 0x6f, 0x7a, 0x27, 0x01, - 0x7f, 0x02, 0x4f, 0xd6, 0x7e, 0x14, 0x10, 0x2d, 0x80, 0xeb, 0x75, 0x2f, 0x55, 0x12, 0x73, 0x35, - 0x75, 0x2f, 0x04, 0x12, 0x73, 0x35, 0x7a, 0x61, 0x2f, 0x12, 0x73, 0x35, 0x7a, 0x71, 0x2f, 0x12, - 0x73, 0x35, 0x7e, 0x17, 0x01, 0x71, 0x7e, 0x27, 0x01, 0x81, 0x2d, 0x23, 0x7e, 0x09, 0xb0, 0x0b, - 0x04, 0x7a, 0x19, 0xb0, 0x0b, 0x14, 0xbe, 0x14, 0x18, 0x2c, 0x38, 0x0f, 0x1b, 0x34, 0x78, 0xec, - 0x7a, 0x17, 0x01, 0x71, 0x7a, 0x27, 0x01, 0x81, 0x02, 0x53, 0x03, 0x7e, 0x14, 0x14, 0x2d, 0x80, - 0xeb, 0x75, 0x2f, 0x55, 0x12, 0x73, 0x35, 0x75, 0x2f, 0x05, 0x12, 0x73, 0x35, 0x7a, 0x61, 0x2f, - 0x12, 0x73, 0x35, 0x7a, 0x71, 0x2f, 0x12, 0x73, 0x35, 0x7e, 0x17, 0x01, 0x73, 0x7e, 0x27, 0x01, - 0x83, 0x2d, 0x23, 0x7e, 0x09, 0xb0, 0x0b, 0x04, 0x7a, 0x19, 0xb0, 0x0b, 0x14, 0xbe, 0x14, 0x1c, - 0x2c, 0x38, 0x0f, 0x1b, 0x34, 0x78, 0xec, 0x7a, 0x17, 0x01, 0x73, 0x7a, 0x27, 0x01, 0x83, 0x02, - 0x56, 0x30, 0x7e, 0x14, 0x18, 0x2d, 0x80, 0xeb, 0x75, 0x2f, 0x55, 0x12, 0x73, 0x35, 0x75, 0x2f, - 0x06, 0x12, 0x73, 0x35, 0x7a, 0x61, 0x2f, 0x12, 0x73, 0x35, 0x7a, 0x71, 0x2f, 0x12, 0x73, 0x35, - 0x7e, 0x17, 0x01, 0x75, 0x7e, 0x27, 0x01, 0x85, 0x2d, 0x23, 0x7e, 0x09, 0xb0, 0x0b, 0x04, 0x7a, - 0x19, 0xb0, 0x0b, 0x14, 0xbe, 0x14, 0x20, 0x2c, 0x38, 0x0f, 0x1b, 0x34, 0x78, 0xec, 0x7a, 0x17, - 0x01, 0x75, 0x7a, 0x27, 0x01, 0x85, 0x02, 0x59, 0x5d, 0x7e, 0x14, 0x1c, 0x2d, 0x80, 0xeb, 0x75, - 0x2f, 0x55, 0x12, 0x73, 0x35, 0x75, 0x2f, 0x07, 0x12, 0x73, 0x35, 0x7a, 0x61, 0x2f, 0x12, 0x73, - 0x35, 0x7a, 0x71, 0x2f, 0x12, 0x73, 0x35, 0x7e, 0x17, 0x01, 0x77, 0x7e, 0x27, 0x01, 0x87, 0x2d, - 0x23, 0x7e, 0x09, 0xb0, 0x0b, 0x04, 0x7a, 0x19, 0xb0, 0x0b, 0x14, 0xbe, 0x14, 0x24, 0x2c, 0x38, - 0x0f, 0x1b, 0x34, 0x78, 0xec, 0x7a, 0x17, 0x01, 0x77, 0x7a, 0x27, 0x01, 0x87, 0x02, 0x5c, 0x8a, - 0x7e, 0x14, 0x20, 0x2d, 0x80, 0xeb, - -// Segment #15, Start Address 00ff4000, Length 13109 -0xff,0x00,0x00,0x40,0x35,0x33, - 0x7e, 0x04, 0x00, 0x01, 0x7e, 0x14, 0x7f, 0xf8, 0x7e, 0x24, 0x00, 0xfe, 0x7d, 0x31, 0x0b, 0x1a, - 0x50, 0x1b, 0x0a, 0x50, 0x7e, 0x14, 0x40, 0x1b, 0x02, 0x40, 0x74, 0x7e, 0xf8, 0x00, 0x59, 0x75, - 0xb0, 0xdf, 0x7e, 0xb0, 0x01, 0x7a, 0xb3, 0x90, 0x00, 0x7e, 0xf4, 0x40, 0x30, 0x02, 0x40, 0x8b, - 0x12, 0x74, 0x4e, 0xf5, 0x2e, 0x7a, 0xa1, 0x2d, 0x7a, 0x11, 0x58, 0x12, 0x6b, 0x02, 0x12, 0x40, - 0xeb, 0x7e, 0xb3, 0x3f, 0xf1, 0x60, 0x03, 0x12, 0x43, 0x79, 0x12, 0x6b, 0xde, 0xd2, 0xaf, 0x02, - 0x30, 0x00, 0x7e, 0x04, 0x00, 0xff, 0x7e, 0x18, 0x40, 0x60, 0x7a, 0x1c, 0x00, 0x01, 0x89, 0x18, - 0x7e, 0xb0, 0x01, 0x7a, 0xb3, 0x94, 0x00, 0x7a, 0xb3, 0x2c, 0x35, 0x7e, 0xb0, 0x01, 0x7a, 0xb3, - 0x93, 0x00, 0x89, 0x08, 0x7e, 0x04, 0x00, 0xff, 0x7e, 0x18, 0x40, 0x82, 0x7a, 0x1c, 0x00, 0x01, - 0x89, 0x18, 0x7e, 0xb0, 0x00, 0x7a, 0xb3, 0x93, 0x00, 0x89, 0x08, 0x7e, 0x08, 0x00, 0x20, 0x7e, - 0x44, 0x04, 0x00, 0x7e, 0x40, 0x00, 0x7e, 0xe4, 0x40, 0x9d, 0x02, 0x73, 0x50, 0x7e, 0x08, 0x01, - 0x59, 0x7e, 0x44, 0x2a, 0xdd, 0x7e, 0x40, 0x00, 0x7e, 0xe4, 0x40, 0xaf, 0x02, 0x73, 0x50, 0x7e, - 0x08, 0x00, 0x59, 0x7e, 0x44, 0x01, 0x00, 0x7e, 0x40, 0x53, 0x7e, 0xe4, 0x40, 0xc1, 0x02, 0x73, - 0x50, 0x75, 0x57, 0x01, 0x75, 0x56, 0x00, 0x7e, 0x04, 0x00, 0x08, 0x75, 0x54, 0x58, 0x75, 0x55, - 0x08, 0x75, 0x51, 0x08, 0x75, 0x53, 0x01, 0x75, 0x89, 0x01, 0x75, 0x8a, 0x01, 0x75, 0x8c, 0x00, - 0xd2, 0x8c, 0x7e, 0x04, 0x00, 0x02, 0x7a, 0x05, 0x42, 0x89, 0xf4, 0x75, 0xb7, 0x7f, 0x75, 0xb8, - 0x7f, 0x75, 0xb3, 0x01, 0x75, 0xb2, 0x01, 0xd2, 0xa9, 0x22, 0x75, 0xb0, 0xdf, 0xe4, 0xd5, 0xe0, - 0xfd, 0x75, 0xb0, 0xef, 0x7e, 0x24, 0x80, 0x00, 0x7e, 0x11, 0x2e, 0x7e, 0xa0, 0x08, 0x19, 0xa2, - 0x00, 0x10, 0x2e, 0x24, 0x01, 0x00, 0xa5, 0xd9, 0xf2, 0x7e, 0x20, 0x00, 0x12, 0x41, 0x83, 0x0b, - 0x20, 0xbe, 0x21, 0x2e, 0x78, 0xf6, 0x22, 0x7e, 0x04, 0x80, 0x00, 0x4c, 0x02, 0x74, 0xbf, 0x19, - 0xb0, 0x00, 0x0c, 0x74, 0x10, 0x19, 0xb0, 0x00, 0x08, 0x74, 0x80, 0x19, 0xb0, 0x00, 0x0c, 0x7e, - 0x54, 0x00, 0x02, 0x19, 0xa0, 0x00, 0x04, 0x19, 0xb0, 0x00, 0x00, 0x74, 0x03, 0x19, 0xb0, 0x00, - 0x0c, 0x74, 0x07, 0x20, 0x68, 0x02, 0x74, 0x0f, 0x19, 0xb0, 0x00, 0x04, 0x30, 0x6b, 0x17, 0x74, - 0xbf, 0x19, 0xb0, 0x00, 0x0c, 0x74, 0x28, 0x20, 0x68, 0x02, 0x74, 0x20, 0x19, 0xb0, 0x00, 0x04, - 0x74, 0x03, 0x19, 0xb0, 0x00, 0x0c, 0x74, 0xa7, 0x19, 0xb0, 0x00, 0x08, 0x74, 0x0c, 0x19, 0xb0, - 0x00, 0x10, 0x22, 0x7e, 0x04, 0x80, 0x00, 0x4c, 0x02, 0xe4, 0x19, 0xb0, 0x00, 0x04, 0x09, 0xb0, - 0x00, 0x10, 0x54, 0x08, 0x19, 0xb0, 0x00, 0x10, 0x74, 0xa7, 0x19, 0xb0, 0x00, 0x08, 0x22, 0x7c, - 0xb2, 0x23, 0x0a, 0x2b, 0x49, 0x22, 0x41, 0xaa, 0x89, 0x24, 0x41, 0xba, 0x41, 0xd7, 0x41, 0xf4, - 0x42, 0x11, 0x42, 0x2e, 0x42, 0x4b, 0x42, 0x68, 0x42, 0x85, 0xc2, 0x10, 0xc2, 0x18, 0xc2, 0x08, - 0x7e, 0x04, 0x04, 0x2d, 0x7a, 0x07, 0x01, 0x59, 0x7a, 0x07, 0x01, 0x69, 0x6d, 0x00, 0x7a, 0x07, - 0x01, 0x79, 0x7a, 0x07, 0x01, 0x89, 0x22, 0xc2, 0x11, 0xc2, 0x19, 0xc2, 0x09, 0x7e, 0x04, 0x08, - 0x2d, 0x7a, 0x07, 0x01, 0x5b, 0x7a, 0x07, 0x01, 0x6b, 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x7b, 0x7a, - 0x07, 0x01, 0x8b, 0x22, 0xc2, 0x12, 0xc2, 0x1a, 0xc2, 0x0a, 0x7e, 0x04, 0x0c, 0x2d, 0x7a, 0x07, - 0x01, 0x5d, 0x7a, 0x07, 0x01, 0x6d, 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x7d, 0x7a, 0x07, 0x01, 0x8d, - 0x22, 0xc2, 0x13, 0xc2, 0x1b, 0xc2, 0x0b, 0x7e, 0x04, 0x10, 0x2d, 0x7a, 0x07, 0x01, 0x5f, 0x7a, - 0x07, 0x01, 0x6f, 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x7f, 0x7a, 0x07, 0x01, 0x8f, 0x22, 0xc2, 0x14, - 0xc2, 0x1c, 0xc2, 0x0c, 0x7e, 0x04, 0x14, 0x2d, 0x7a, 0x07, 0x01, 0x61, 0x7a, 0x07, 0x01, 0x71, - 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x81, 0x7a, 0x07, 0x01, 0x91, 0x22, 0xc2, 0x15, 0xc2, 0x1d, 0xc2, - 0x0d, 0x7e, 0x04, 0x18, 0x2d, 0x7a, 0x07, 0x01, 0x63, 0x7a, 0x07, 0x01, 0x73, 0x6d, 0x00, 0x7a, - 0x07, 0x01, 0x83, 0x7a, 0x07, 0x01, 0x93, 0x22, 0xc2, 0x16, 0xc2, 0x1e, 0xc2, 0x0e, 0x7e, 0x04, - 0x1c, 0x2d, 0x7a, 0x07, 0x01, 0x65, 0x7a, 0x07, 0x01, 0x75, 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x85, - 0x7a, 0x07, 0x01, 0x95, 0x22, 0xc2, 0x17, 0xc2, 0x1f, 0xc2, 0x0f, 0x7e, 0x04, 0x20, 0x2d, 0x7a, - 0x07, 0x01, 0x67, 0x7a, 0x07, 0x01, 0x77, 0x6d, 0x00, 0x7a, 0x07, 0x01, 0x87, 0x7a, 0x07, 0x01, - 0x97, 0x22, 0x7c, 0xb2, 0x23, 0x0a, 0x2b, 0x49, 0x22, 0x42, 0xad, 0x89, 0x24, 0x42, 0xbd, 0x42, - 0xd4, 0x42, 0xeb, 0x43, 0x02, 0x43, 0x19, 0x43, 0x30, 0x43, 0x47, 0x43, 0x5e, 0x30, 0x40, 0x07, - 0x20, 0x58, 0x04, 0xc2, 0x28, 0x80, 0x0c, 0x30, 0x48, 0x07, 0x20, 0x50, 0x04, 0xc2, 0x28, 0x80, - 0x02, 0xd2, 0x28, 0x22, 0x30, 0x41, 0x07, 0x20, 0x59, 0x04, 0xc2, 0x29, 0x80, 0x0c, 0x30, 0x49, - 0x07, 0x20, 0x51, 0x04, 0xc2, 0x29, 0x80, 0x02, 0xd2, 0x29, 0x22, 0x30, 0x42, 0x07, 0x20, 0x5a, - 0x04, 0xc2, 0x2a, 0x80, 0x0c, 0x30, 0x4a, 0x07, 0x20, 0x52, 0x04, 0xc2, 0x2a, 0x80, 0x02, 0xd2, - 0x2a, 0x22, 0x30, 0x43, 0x07, 0x20, 0x5b, 0x04, 0xc2, 0x2b, 0x80, 0x0c, 0x30, 0x4b, 0x07, 0x20, - 0x53, 0x04, 0xc2, 0x2b, 0x80, 0x02, 0xd2, 0x2b, 0x22, 0x30, 0x44, 0x07, 0x20, 0x5c, 0x04, 0xc2, - 0x2c, 0x80, 0x0c, 0x30, 0x4c, 0x07, 0x20, 0x54, 0x04, 0xc2, 0x2c, 0x80, 0x02, 0xd2, 0x2c, 0x22, - 0x30, 0x45, 0x07, 0x20, 0x5d, 0x04, 0xc2, 0x2d, 0x80, 0x0c, 0x30, 0x4d, 0x07, 0x20, 0x55, 0x04, - 0xc2, 0x2d, 0x80, 0x02, 0xd2, 0x2d, 0x22, 0x30, 0x46, 0x07, 0x20, 0x5e, 0x04, 0xc2, 0x2e, 0x80, - 0x0c, 0x30, 0x4e, 0x07, 0x20, 0x56, 0x04, 0xc2, 0x2e, 0x80, 0x02, 0xd2, 0x2e, 0x22, 0x30, 0x47, - 0x07, 0x20, 0x5f, 0x04, 0xc2, 0x2f, 0x80, 0x0c, 0x30, 0x4f, 0x07, 0x20, 0x57, 0x04, 0xc2, 0x2f, - 0x80, 0x02, 0xd2, 0x2f, 0x22, 0x44, 0x66, 0x43, 0x8a, 0xbe, 0xb0, 0x02, 0x40, 0x01, 0x22, 0x23, - 0x0a, 0x5b, 0x49, 0x55, 0x43, 0x75, 0x99, 0x54, 0xd3, 0x22, 0x7e, 0xb0, 0x00, 0x7a, 0xb3, 0x94, - 0x00, 0x7a, 0xb3, 0x2c, 0x35, 0x12, 0x44, 0x7a, 0x7e, 0x04, 0x28, 0x2d, 0x7a, 0x07, 0x01, 0xc1, - 0x7a, 0x07, 0x01, 0xc3, 0x7e, 0x04, 0x24, 0x2d, 0x7a, 0x07, 0x01, 0xc7, 0x7a, 0x07, 0x01, 0xc9, - 0x7e, 0x04, 0x66, 0x7f, 0x7a, 0x05, 0x4b, 0x74, 0x20, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x60, 0x7a, - 0xb3, 0x91, 0x1c, 0x74, 0x12, 0x7a, 0xb3, 0x91, 0x06, 0x74, 0x40, 0x7a, 0xb3, 0x91, 0x07, 0x74, - 0x1e, 0x7a, 0xb3, 0x91, 0x10, 0x74, 0x48, 0x7a, 0xb3, 0x91, 0x12, 0x74, 0x10, 0x7a, 0xb3, 0x91, - 0x13, 0x74, 0x3f, 0x7a, 0xb3, 0x91, 0x14, 0x74, 0x40, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x60, 0x7a, - 0xb3, 0x91, 0x1c, 0x74, 0x14, 0x7a, 0xb3, 0x91, 0x06, 0x74, 0x40, 0x7a, 0xb3, 0x91, 0x07, 0x74, - 0x16, 0x7a, 0xb3, 0x91, 0x10, 0x74, 0x08, 0x7a, 0xb3, 0x91, 0x11, 0x74, 0x20, 0x7a, 0xb3, 0x91, - 0x13, 0x74, 0x3f, 0x7a, 0xb3, 0x91, 0x14, 0x74, 0x60, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x60, 0x7a, - 0xb3, 0x91, 0x1c, 0x74, 0x16, 0x7a, 0xb3, 0x91, 0x06, 0x74, 0x20, 0x7a, 0xb3, 0x91, 0x07, 0x74, - 0x2f, 0x7a, 0xb3, 0x91, 0x10, 0x74, 0x48, 0x7a, 0xb3, 0x91, 0x12, 0x74, 0x10, 0x7a, 0xb3, 0x91, - 0x13, 0x74, 0x3f, 0x7a, 0xb3, 0x91, 0x14, 0x74, 0x02, 0x7a, 0xb3, 0x91, 0x06, 0x74, 0x0f, 0x7a, - 0xb3, 0x91, 0x07, 0x12, 0x40, 0xfa, 0x7e, 0x20, 0x00, 0x12, 0x41, 0x9f, 0x0b, 0x20, 0xbe, 0x21, - 0x2e, 0x78, 0xf6, 0xd2, 0xa8, 0x22, 0x7e, 0xb0, 0x01, 0x7a, 0xb3, 0x94, 0x00, 0x7a, 0xb3, 0x2c, - 0x35, 0x12, 0x44, 0x7a, 0x75, 0xb0, 0xdf, 0xc2, 0xa8, 0x22, 0x74, 0x02, 0x7a, 0xb3, 0x91, 0x06, - 0x74, 0x01, 0x7a, 0xb3, 0x91, 0x07, 0x7e, 0x20, 0x04, 0x7c, 0xb2, 0xc2, 0xd7, 0x13, 0x13, 0x13, - 0x13, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x60, 0x7a, 0xb3, 0x91, 0x1c, 0x74, 0x02, 0x7a, 0xb3, 0x91, - 0x12, 0xa5, 0xda, 0xe5, 0x22, 0xca, 0x09, 0x12, 0x30, 0x0e, 0x10, 0x01, 0x34, 0xd5, 0x51, 0x40, - 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x02, 0x7a, 0xb3, 0x91, 0x06, 0x7e, 0xb3, 0x91, 0x07, - 0x74, 0x03, 0x7a, 0xb3, 0x91, 0x06, 0x7e, 0xb3, 0x91, 0x07, 0x7e, 0xb3, 0x91, 0x14, 0x7e, 0xb3, - 0x91, 0x04, 0x63, 0x53, 0x01, 0x7e, 0x00, 0x54, 0x2e, 0x01, 0x53, 0xa5, 0xe6, 0xf5, 0x51, 0x80, - 0x12, 0x20, 0x02, 0x1d, 0x75, 0x53, 0x00, 0x85, 0x54, 0x51, 0xd2, 0x02, 0x74, 0x03, 0x80, 0x0d, - 0x30, 0x02, 0x0e, 0xc2, 0x02, 0x7e, 0x00, 0x56, 0x2e, 0x01, 0x53, 0xa5, 0xe6, 0x7a, 0xb3, 0x90, - 0x00, 0xda, 0x09, 0x32, 0x45, 0x6f, 0x45, 0x8b, 0x45, 0xa7, 0x45, 0xc3, 0x45, 0xdf, 0x45, 0xfb, - 0x46, 0x17, 0x46, 0x33, 0xc0, 0xd0, 0xc0, 0xd1, 0xc0, 0xe0, 0xc0, 0xf0, 0xca, 0x0b, 0xca, 0x1b, - 0xca, 0x2b, 0xd2, 0x01, 0x75, 0x2f, 0x89, 0x12, 0x73, 0x35, 0x7e, 0xb3, 0x90, 0x00, 0x60, 0x28, - 0x7e, 0x14, 0x80, 0x00, 0x7e, 0x00, 0x00, 0x13, 0x50, 0x13, 0xca, 0x0b, 0xca, 0x59, 0x7c, 0xb0, - 0x23, 0x0a, 0x2b, 0x49, 0x22, 0x45, 0x04, 0x99, 0x24, 0xda, 0x59, 0xda, 0x0b, 0xa5, 0x0a, 0xa5, - 0x08, 0xbe, 0x01, 0x2e, 0x78, 0xe1, 0x80, 0xd2, 0x30, 0x04, 0x05, 0xc2, 0x04, 0x12, 0x64, 0x86, - 0xda, 0x2b, 0xda, 0x1b, 0xda, 0x0b, 0xd0, 0xf0, 0xd0, 0xe0, 0xd0, 0xd1, 0xd0, 0xd0, 0x32, 0x09, - 0xb1, 0x00, 0x08, 0x20, 0xe0, 0x14, 0x75, 0x2f, 0x80, 0x12, 0x73, 0x35, 0x54, 0x3e, 0x0a, 0x5b, - 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x61, 0xab, 0x89, 0x54, 0x22, 0x09, 0xb1, 0x00, 0x08, 0x20, - 0xe0, 0x14, 0x75, 0x2f, 0x81, 0x12, 0x73, 0x35, 0x54, 0x3e, 0x0a, 0x5b, 0x7e, 0x44, 0x00, 0xff, - 0x69, 0x52, 0x61, 0xeb, 0x89, 0x54, 0x22, 0x09, 0xb1, 0x00, 0x08, 0x20, 0xe0, 0x14, 0x75, 0x2f, - 0x82, 0x12, 0x73, 0x35, 0x54, 0x3e, 0x0a, 0x5b, 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x62, 0x2b, - 0x89, 0x54, 0x22, 0x09, 0xb1, 0x00, 0x08, 0x20, 0xe0, 0x14, 0x75, 0x2f, 0x83, 0x12, 0x73, 0x35, - 0x54, 0x3e, 0x0a, 0x5b, 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x62, 0x6b, 0x89, 0x54, 0x22, 0x09, - 0xb1, 0x00, 0x08, 0x20, 0xe0, 0x14, 0x75, 0x2f, 0x84, 0x12, 0x73, 0x35, 0x54, 0x3e, 0x0a, 0x5b, - 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x62, 0xab, 0x89, 0x54, 0x22, 0x09, 0xb1, 0x00, 0x08, 0x20, - 0xe0, 0x14, 0x75, 0x2f, 0x85, 0x12, 0x73, 0x35, 0x54, 0x3e, 0x0a, 0x5b, 0x7e, 0x44, 0x00, 0xff, - 0x69, 0x52, 0x62, 0xeb, 0x89, 0x54, 0x22, 0x09, 0xb1, 0x00, 0x08, 0x20, 0xe0, 0x14, 0x75, 0x2f, - 0x86, 0x12, 0x73, 0x35, 0x54, 0x3e, 0x0a, 0x5b, 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x63, 0x2b, - 0x89, 0x54, 0x22, 0x09, 0xb1, 0x00, 0x08, 0x20, 0xe0, 0x14, 0x75, 0x2f, 0x87, 0x12, 0x73, 0x35, - 0x54, 0x3e, 0x0a, 0x5b, 0x7e, 0x44, 0x00, 0xff, 0x69, 0x52, 0x63, 0x6b, 0x89, 0x54, 0x22, 0x10, - 0x08, 0x01, 0x22, 0x20, 0x28, 0x03, 0xd2, 0x08, 0x22, 0x75, 0x2f, 0xa0, 0x12, 0x73, 0x35, 0x7e, - 0x14, 0x80, 0x00, 0x80, 0x06, 0x20, 0x28, 0x03, 0xd2, 0x08, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, - 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x03, 0x12, 0x49, 0x45, 0x30, 0x30, 0x06, 0x20, 0xe6, - 0x4f, 0xd2, 0x08, 0x22, 0x30, 0xe6, 0x02, 0xd2, 0x60, 0x7e, 0x37, 0x01, 0x79, 0x7e, 0x27, 0x01, - 0x99, 0x9d, 0x32, 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, 0x32, 0x7a, 0x05, 0x32, 0x7a, 0x37, 0x01, - 0x79, 0x7e, 0x37, 0x01, 0x59, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x08, 0x2c, 0x38, 0x68, 0x7a, - 0x47, 0x01, 0x59, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x12, - 0x69, 0xf0, 0x10, 0x60, 0xc4, 0x22, 0xc2, 0x60, 0x2d, 0x23, 0x68, 0x78, 0x6d, 0x33, 0x80, 0x1a, - 0x7e, 0x27, 0x01, 0x79, 0xbe, 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, 0x27, 0x01, 0x99, 0x28, 0x04, - 0x7e, 0x27, 0x01, 0x99, 0x7e, 0x37, 0x01, 0x79, 0x9d, 0x32, 0x7d, 0x02, 0x2e, 0x05, 0x32, 0x7a, - 0x05, 0x32, 0x7a, 0x37, 0x01, 0x79, 0x7e, 0x37, 0x01, 0x59, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, - 0x08, 0x2c, 0x38, 0x13, 0x7a, 0x47, 0x01, 0x59, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, - 0x2f, 0x12, 0x73, 0x35, 0x02, 0x69, 0xf0, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, - 0x12, 0x73, 0x35, 0x9e, 0x44, 0x08, 0x2d, 0x9d, 0x24, 0x12, 0x69, 0xf0, 0x7e, 0x34, 0x04, 0x2d, - 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0x59, 0x12, 0x69, 0xf0, 0xbe, 0x25, 0x20, 0x78, 0x03, - 0x02, 0x46, 0xc2, 0x22, 0xd2, 0x08, 0x7e, 0x04, 0x04, 0x2d, 0x7a, 0x07, 0x01, 0x59, 0x7a, 0x07, - 0x01, 0x69, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x75, 0x2f, 0x00, 0x12, 0x73, 0x35, 0x22, 0x75, - 0x2f, 0x92, 0x12, 0x73, 0x35, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x82, 0xda, - 0xb8, 0x78, 0x68, 0x7e, 0x37, 0x01, 0xcb, 0x7e, 0x27, 0x01, 0xa9, 0x2e, 0x24, 0x00, 0x02, 0x2d, - 0x32, 0xbe, 0x34, 0x04, 0x00, 0x38, 0x34, 0x7d, 0x02, 0x2e, 0x05, 0x30, 0x7a, 0x05, 0x30, 0x7a, - 0x37, 0x01, 0xcb, 0x7e, 0x37, 0x01, 0xc9, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x28, 0x2c, 0x38, - 0x3c, 0x7a, 0x47, 0x01, 0xc9, 0x7e, 0x24, 0x00, 0x00, 0x2e, 0x27, 0x01, 0xa9, 0x1b, 0x38, 0x20, - 0x0b, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x02, 0x6a, 0x63, 0x75, 0x2f, 0x99, 0x12, 0x73, - 0x35, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x38, 0x0a, 0x09, 0xb1, - 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x10, 0x22, 0x80, 0x7f, 0x7a, 0x51, 0x2f, - 0x12, 0x73, 0x35, 0x9e, 0x44, 0x28, 0x2d, 0x9d, 0x24, 0x7e, 0x64, 0x00, 0x00, 0x2e, 0x67, 0x01, - 0xa9, 0x9e, 0x24, 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, 0x35, 0x12, 0x6a, 0x63, 0x7e, - 0x34, 0x24, 0x2d, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xc9, 0x02, 0x6a, 0x63, 0x7a, 0x39, - 0xc0, 0x7e, 0x34, 0x24, 0x2d, 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, 0x44, 0x80, 0xe5, 0x9d, 0x32, - 0x7c, 0xb6, 0x54, 0x0f, 0x23, 0x23, 0x23, 0x44, 0x00, 0x7a, 0x69, 0xb0, 0x7a, 0x79, 0x70, 0x0b, - 0x35, 0x75, 0x2f, 0x93, 0x12, 0x73, 0x35, 0x7a, 0x71, 0x2f, 0x12, 0x73, 0x35, 0xbd, 0x04, 0x68, - 0x2b, 0x7a, 0x07, 0x01, 0xc9, 0x7e, 0x47, 0x01, 0xcb, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xcb, 0x2e, - 0x35, 0x30, 0x7a, 0x35, 0x30, 0x22, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0x13, 0x22, - 0x7e, 0x04, 0x24, 0x2d, 0x80, 0x28, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0x2a, 0x7e, 0x04, 0x24, 0x2d, - 0x80, 0xcf, 0x7e, 0x07, 0x01, 0xcb, 0x7e, 0x24, 0x03, 0xfe, 0x9d, 0x20, 0x28, 0x40, 0x7e, 0x07, - 0x01, 0xc9, 0x7e, 0x44, 0x28, 0x2d, 0x7d, 0x60, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd2, 0x7d, 0x70, - 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd0, 0x7d, 0x54, 0x9d, 0x50, 0xbd, 0x25, 0x40, 0x02, 0x7d, 0x25, - 0x7d, 0x32, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, 0x01, 0x31, 0xda, 0xb8, 0x7e, - 0x19, 0xb0, 0x7a, 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, 0x02, 0x48, 0x1e, 0x75, 0x2f, - 0x99, 0x12, 0x73, 0x35, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x38, - 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x10, 0x22, 0xda, 0xb8, - 0x30, 0xe0, 0xd8, 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, 0x12, 0x48, 0x1e, 0xda, 0xb8, 0x02, 0x49, - 0x45, 0x09, 0xb1, 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, 0x2f, 0x90, 0x12, 0x73, 0x35, 0xf5, 0x2f, - 0x12, 0x73, 0x35, 0xa5, 0xfd, 0x5e, 0x50, 0x0a, 0x68, 0x1d, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, - 0x04, 0xd2, 0x58, 0x80, 0x02, 0xc2, 0x58, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x50, - 0x80, 0x02, 0xc2, 0x50, 0x12, 0x42, 0xbd, 0x02, 0x61, 0x13, 0x75, 0x2f, 0x91, 0x12, 0x73, 0x35, - 0x09, 0xb1, 0x00, 0x14, 0x7a, 0xb1, 0x2f, 0x12, 0x73, 0x35, 0x20, 0xe0, 0x08, 0xd2, 0x04, 0x7e, - 0xa0, 0x80, 0x02, 0x61, 0x13, 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, 0x12, 0x61, 0x13, - 0xca, 0xb8, 0x5e, 0xb0, 0x1c, 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, 0x61, 0x00, 0x00, - 0x12, 0x61, 0x36, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x48, 0x72, 0x75, 0x2f, - 0x95, 0x12, 0x73, 0x35, 0x22, 0x75, 0x2f, 0x96, 0x12, 0x73, 0x35, 0x22, 0x10, 0x09, 0x01, 0x22, - 0x20, 0x29, 0x03, 0xd2, 0x09, 0x22, 0x75, 0x2f, 0xa1, 0x12, 0x73, 0x35, 0x7e, 0x14, 0x81, 0x00, - 0x80, 0x06, 0x20, 0x29, 0x03, 0xd2, 0x09, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, - 0x1e, 0xda, 0xb8, 0x68, 0x03, 0x12, 0x4c, 0x72, 0x30, 0x31, 0x06, 0x20, 0xe6, 0x4f, 0xd2, 0x09, - 0x22, 0x30, 0xe6, 0x02, 0xd2, 0x61, 0x7e, 0x37, 0x01, 0x7b, 0x7e, 0x27, 0x01, 0x9b, 0x9d, 0x32, - 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, 0x34, 0x7a, 0x05, 0x34, 0x7a, 0x37, 0x01, 0x7b, 0x7e, 0x37, - 0x01, 0x5b, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x0c, 0x2c, 0x38, 0x68, 0x7a, 0x47, 0x01, 0x5b, - 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x12, 0x69, 0xf0, 0x10, - 0x61, 0xc4, 0x22, 0xc2, 0x61, 0x2d, 0x23, 0x68, 0x78, 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, 0x01, - 0x7b, 0xbe, 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, 0x27, 0x01, 0x9b, 0x28, 0x04, 0x7e, 0x27, 0x01, - 0x9b, 0x7e, 0x37, 0x01, 0x7b, 0x9d, 0x32, 0x7d, 0x02, 0x2e, 0x05, 0x34, 0x7a, 0x05, 0x34, 0x7a, - 0x37, 0x01, 0x7b, 0x7e, 0x37, 0x01, 0x5b, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x0c, 0x2c, 0x38, - 0x13, 0x7a, 0x47, 0x01, 0x5b, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, - 0x35, 0x02, 0x69, 0xf0, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, - 0x9e, 0x44, 0x0c, 0x2d, 0x9d, 0x24, 0x12, 0x69, 0xf0, 0x7e, 0x34, 0x08, 0x2d, 0x7d, 0x24, 0x2d, - 0x43, 0x7a, 0x47, 0x01, 0x5b, 0x12, 0x69, 0xf0, 0xbe, 0x25, 0x20, 0x78, 0x03, 0x02, 0x49, 0xef, - 0x22, 0xd2, 0x09, 0x7e, 0x04, 0x08, 0x2d, 0x7a, 0x07, 0x01, 0x5b, 0x7a, 0x07, 0x01, 0x6b, 0x75, - 0x2f, 0x94, 0x12, 0x73, 0x35, 0x75, 0x2f, 0x00, 0x12, 0x73, 0x35, 0x22, 0x75, 0x2f, 0x92, 0x12, - 0x73, 0x35, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, 0x68, - 0x7e, 0x37, 0x01, 0xcb, 0x7e, 0x27, 0x01, 0xab, 0x2e, 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, 0x34, - 0x04, 0x00, 0x38, 0x34, 0x7d, 0x02, 0x2e, 0x05, 0x30, 0x7a, 0x05, 0x30, 0x7a, 0x37, 0x01, 0xcb, - 0x7e, 0x37, 0x01, 0xc9, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x28, 0x2c, 0x38, 0x3c, 0x7a, 0x47, - 0x01, 0xc9, 0x7e, 0x24, 0x01, 0x00, 0x2e, 0x27, 0x01, 0xab, 0x1b, 0x38, 0x20, 0x0b, 0x35, 0x7a, - 0x51, 0x2f, 0x12, 0x73, 0x35, 0x02, 0x6a, 0x63, 0x75, 0x2f, 0x99, 0x12, 0x73, 0x35, 0x09, 0xb1, - 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x39, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, - 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x11, 0x22, 0x80, 0x7f, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, - 0x9e, 0x44, 0x28, 0x2d, 0x9d, 0x24, 0x7e, 0x64, 0x01, 0x00, 0x2e, 0x67, 0x01, 0xab, 0x9e, 0x24, - 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, 0x35, 0x12, 0x6a, 0x63, 0x7e, 0x34, 0x24, 0x2d, - 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xc9, 0x02, 0x6a, 0x63, 0x7a, 0x39, 0xc0, 0x7e, 0x34, - 0x24, 0x2d, 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, 0x44, 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, 0x54, - 0x0f, 0x23, 0x23, 0x23, 0x44, 0x01, 0x7a, 0x69, 0xb0, 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, 0x2f, - 0x93, 0x12, 0x73, 0x35, 0x7a, 0x71, 0x2f, 0x12, 0x73, 0x35, 0xbd, 0x04, 0x68, 0x2b, 0x7a, 0x07, - 0x01, 0xc9, 0x7e, 0x47, 0x01, 0xcb, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xcb, 0x2e, 0x35, 0x30, 0x7a, - 0x35, 0x30, 0x22, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0x13, 0x22, 0x7e, 0x04, 0x24, - 0x2d, 0x80, 0x28, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0x2a, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0xcf, 0x7e, - 0x07, 0x01, 0xcb, 0x7e, 0x24, 0x03, 0xfe, 0x9d, 0x20, 0x28, 0x40, 0x7e, 0x07, 0x01, 0xc9, 0x7e, - 0x44, 0x28, 0x2d, 0x7d, 0x60, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd2, 0x7d, 0x70, 0x0b, 0x04, 0xbd, - 0x04, 0x68, 0xd0, 0x7d, 0x54, 0x9d, 0x50, 0xbd, 0x25, 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, 0x09, - 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, 0x01, 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, 0x7a, - 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, 0x02, 0x4b, 0x4b, 0x75, 0x2f, 0x99, 0x12, 0x73, - 0x35, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x39, 0x0a, 0x09, 0xb1, - 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x11, 0x22, 0xda, 0xb8, 0x30, 0xe0, 0xd8, - 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, 0x12, 0x4b, 0x4b, 0xda, 0xb8, 0x02, 0x4c, 0x72, 0x09, 0xb1, - 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, 0x2f, 0x90, 0x12, 0x73, 0x35, 0xf5, 0x2f, 0x12, 0x73, 0x35, - 0xa5, 0xfd, 0x5e, 0x50, 0x0a, 0x68, 0x1d, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x59, - 0x80, 0x02, 0xc2, 0x59, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x51, 0x80, 0x02, 0xc2, - 0x51, 0x12, 0x42, 0xd4, 0x02, 0x61, 0x13, 0x75, 0x2f, 0x91, 0x12, 0x73, 0x35, 0x09, 0xb1, 0x00, - 0x14, 0x7a, 0xb1, 0x2f, 0x12, 0x73, 0x35, 0x20, 0xe0, 0x08, 0xd2, 0x04, 0x7e, 0xa0, 0x80, 0x02, - 0x61, 0x13, 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, 0x12, 0x61, 0x13, 0xca, 0xb8, 0x5e, - 0xb0, 0x1c, 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, 0x61, 0x00, 0x00, 0x12, 0x61, 0x36, - 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x4b, 0x9f, 0x75, 0x2f, 0x95, 0x12, 0x73, - 0x35, 0x22, 0x75, 0x2f, 0x96, 0x12, 0x73, 0x35, 0x22, 0x10, 0x0a, 0x01, 0x22, 0x20, 0x2a, 0x03, - 0xd2, 0x0a, 0x22, 0x75, 0x2f, 0xa2, 0x12, 0x73, 0x35, 0x7e, 0x14, 0x82, 0x00, 0x80, 0x06, 0x20, - 0x2a, 0x03, 0xd2, 0x0a, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, - 0x68, 0x03, 0x12, 0x4f, 0x9f, 0x30, 0x32, 0x06, 0x20, 0xe6, 0x4f, 0xd2, 0x0a, 0x22, 0x30, 0xe6, - 0x02, 0xd2, 0x62, 0x7e, 0x37, 0x01, 0x7d, 0x7e, 0x27, 0x01, 0x9d, 0x9d, 0x32, 0x40, 0x31, 0x7d, - 0x02, 0x2e, 0x05, 0x36, 0x7a, 0x05, 0x36, 0x7a, 0x37, 0x01, 0x7d, 0x7e, 0x37, 0x01, 0x5d, 0x7d, - 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x10, 0x2c, 0x38, 0x68, 0x7a, 0x47, 0x01, 0x5d, 0x75, 0x2f, 0x94, - 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x12, 0x69, 0xf0, 0x10, 0x62, 0xc4, 0x22, - 0xc2, 0x62, 0x2d, 0x23, 0x68, 0x78, 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, 0x01, 0x7d, 0xbe, 0x24, - 0x00, 0x00, 0x68, 0x6a, 0xbe, 0x27, 0x01, 0x9d, 0x28, 0x04, 0x7e, 0x27, 0x01, 0x9d, 0x7e, 0x37, - 0x01, 0x7d, 0x9d, 0x32, 0x7d, 0x02, 0x2e, 0x05, 0x36, 0x7a, 0x05, 0x36, 0x7a, 0x37, 0x01, 0x7d, - 0x7e, 0x37, 0x01, 0x5d, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x10, 0x2c, 0x38, 0x13, 0x7a, 0x47, - 0x01, 0x5d, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x02, 0x69, - 0xf0, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x9e, 0x44, 0x10, - 0x2d, 0x9d, 0x24, 0x12, 0x69, 0xf0, 0x7e, 0x34, 0x0c, 0x2d, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, - 0x01, 0x5d, 0x12, 0x69, 0xf0, 0xbe, 0x25, 0x20, 0x78, 0x03, 0x02, 0x4d, 0x1c, 0x22, 0xd2, 0x0a, - 0x7e, 0x04, 0x0c, 0x2d, 0x7a, 0x07, 0x01, 0x5d, 0x7a, 0x07, 0x01, 0x6d, 0x75, 0x2f, 0x94, 0x12, - 0x73, 0x35, 0x75, 0x2f, 0x00, 0x12, 0x73, 0x35, 0x22, 0x75, 0x2f, 0x92, 0x12, 0x73, 0x35, 0xd2, - 0x04, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, 0x68, 0x7e, 0x37, 0x01, - 0xcb, 0x7e, 0x27, 0x01, 0xad, 0x2e, 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, 0x34, 0x04, 0x00, 0x38, - 0x34, 0x7d, 0x02, 0x2e, 0x05, 0x30, 0x7a, 0x05, 0x30, 0x7a, 0x37, 0x01, 0xcb, 0x7e, 0x37, 0x01, - 0xc9, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x28, 0x2c, 0x38, 0x3c, 0x7a, 0x47, 0x01, 0xc9, 0x7e, - 0x24, 0x02, 0x00, 0x2e, 0x27, 0x01, 0xad, 0x1b, 0x38, 0x20, 0x0b, 0x35, 0x7a, 0x51, 0x2f, 0x12, - 0x73, 0x35, 0x02, 0x6a, 0x63, 0x75, 0x2f, 0x99, 0x12, 0x73, 0x35, 0x09, 0xb1, 0x00, 0x04, 0x54, - 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3a, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, - 0x00, 0x10, 0xd2, 0x12, 0x22, 0x80, 0x7f, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x9e, 0x44, 0x28, - 0x2d, 0x9d, 0x24, 0x7e, 0x64, 0x02, 0x00, 0x2e, 0x67, 0x01, 0xad, 0x9e, 0x24, 0x00, 0x02, 0x40, - 0x17, 0x1b, 0x38, 0x60, 0x0b, 0x35, 0x12, 0x6a, 0x63, 0x7e, 0x34, 0x24, 0x2d, 0x7d, 0x24, 0x2d, - 0x43, 0x7a, 0x47, 0x01, 0xc9, 0x02, 0x6a, 0x63, 0x7a, 0x39, 0xc0, 0x7e, 0x34, 0x24, 0x2d, 0x7a, - 0x39, 0xd0, 0x0b, 0x34, 0x1b, 0x44, 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, 0x54, 0x0f, 0x23, 0x23, - 0x23, 0x44, 0x02, 0x7a, 0x69, 0xb0, 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, 0x2f, 0x93, 0x12, 0x73, - 0x35, 0x7a, 0x71, 0x2f, 0x12, 0x73, 0x35, 0xbd, 0x04, 0x68, 0x2b, 0x7a, 0x07, 0x01, 0xc9, 0x7e, - 0x47, 0x01, 0xcb, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xcb, 0x2e, 0x35, 0x30, 0x7a, 0x35, 0x30, 0x22, - 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0x13, 0x22, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0x28, - 0x7e, 0x04, 0x24, 0x2d, 0x80, 0x2a, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0xcf, 0x7e, 0x07, 0x01, 0xcb, - 0x7e, 0x24, 0x03, 0xfe, 0x9d, 0x20, 0x28, 0x40, 0x7e, 0x07, 0x01, 0xc9, 0x7e, 0x44, 0x28, 0x2d, - 0x7d, 0x60, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd2, 0x7d, 0x70, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd0, - 0x7d, 0x54, 0x9d, 0x50, 0xbd, 0x25, 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, 0x09, 0xb1, 0x00, 0x14, - 0xca, 0xb8, 0x54, 0x1f, 0xb4, 0x01, 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, 0x7a, 0x09, 0xb0, 0x0b, - 0x04, 0x1b, 0x24, 0x78, 0xe7, 0x02, 0x4e, 0x78, 0x75, 0x2f, 0x99, 0x12, 0x73, 0x35, 0x09, 0xb1, - 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3a, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, - 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x12, 0x22, 0xda, 0xb8, 0x30, 0xe0, 0xd8, 0xbd, 0x32, 0x68, - 0x07, 0xca, 0xb8, 0x12, 0x4e, 0x78, 0xda, 0xb8, 0x02, 0x4f, 0x9f, 0x09, 0xb1, 0x00, 0x18, 0x7e, - 0xa0, 0x88, 0x75, 0x2f, 0x90, 0x12, 0x73, 0x35, 0xf5, 0x2f, 0x12, 0x73, 0x35, 0xa5, 0xfd, 0x5e, - 0x50, 0x0a, 0x68, 0x1d, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x5a, 0x80, 0x02, 0xc2, - 0x5a, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x52, 0x80, 0x02, 0xc2, 0x52, 0x12, 0x42, - 0xeb, 0x02, 0x61, 0x13, 0x75, 0x2f, 0x91, 0x12, 0x73, 0x35, 0x09, 0xb1, 0x00, 0x14, 0x7a, 0xb1, - 0x2f, 0x12, 0x73, 0x35, 0x20, 0xe0, 0x08, 0xd2, 0x04, 0x7e, 0xa0, 0x80, 0x02, 0x61, 0x13, 0xd2, - 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, 0x12, 0x61, 0x13, 0xca, 0xb8, 0x5e, 0xb0, 0x1c, 0xda, - 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, 0x61, 0x00, 0x00, 0x12, 0x61, 0x36, 0x09, 0xb1, 0x00, - 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x4e, 0xcc, 0x75, 0x2f, 0x95, 0x12, 0x73, 0x35, 0x22, 0x75, - 0x2f, 0x96, 0x12, 0x73, 0x35, 0x22, 0x10, 0x0b, 0x01, 0x22, 0x20, 0x2b, 0x03, 0xd2, 0x0b, 0x22, - 0x75, 0x2f, 0xa3, 0x12, 0x73, 0x35, 0x7e, 0x14, 0x83, 0x00, 0x80, 0x06, 0x20, 0x2b, 0x03, 0xd2, - 0x0b, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x03, 0x12, - 0x52, 0xcc, 0x30, 0x33, 0x06, 0x20, 0xe6, 0x4f, 0xd2, 0x0b, 0x22, 0x30, 0xe6, 0x02, 0xd2, 0x63, - 0x7e, 0x37, 0x01, 0x7f, 0x7e, 0x27, 0x01, 0x9f, 0x9d, 0x32, 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, - 0x38, 0x7a, 0x05, 0x38, 0x7a, 0x37, 0x01, 0x7f, 0x7e, 0x37, 0x01, 0x5f, 0x7d, 0x43, 0x2d, 0x42, - 0xbe, 0x44, 0x14, 0x2c, 0x38, 0x68, 0x7a, 0x47, 0x01, 0x5f, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, - 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x12, 0x69, 0xf0, 0x10, 0x63, 0xc4, 0x22, 0xc2, 0x63, 0x2d, - 0x23, 0x68, 0x78, 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, 0x01, 0x7f, 0xbe, 0x24, 0x00, 0x00, 0x68, - 0x6a, 0xbe, 0x27, 0x01, 0x9f, 0x28, 0x04, 0x7e, 0x27, 0x01, 0x9f, 0x7e, 0x37, 0x01, 0x7f, 0x9d, - 0x32, 0x7d, 0x02, 0x2e, 0x05, 0x38, 0x7a, 0x05, 0x38, 0x7a, 0x37, 0x01, 0x7f, 0x7e, 0x37, 0x01, - 0x5f, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x14, 0x2c, 0x38, 0x13, 0x7a, 0x47, 0x01, 0x5f, 0x75, - 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x02, 0x69, 0xf0, 0x75, 0x2f, - 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x9e, 0x44, 0x14, 0x2d, 0x9d, 0x24, - 0x12, 0x69, 0xf0, 0x7e, 0x34, 0x10, 0x2d, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0x5f, 0x12, - 0x69, 0xf0, 0xbe, 0x25, 0x20, 0x78, 0x03, 0x02, 0x50, 0x49, 0x22, 0xd2, 0x0b, 0x7e, 0x04, 0x10, - 0x2d, 0x7a, 0x07, 0x01, 0x5f, 0x7a, 0x07, 0x01, 0x6f, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x75, - 0x2f, 0x00, 0x12, 0x73, 0x35, 0x22, 0x75, 0x2f, 0x92, 0x12, 0x73, 0x35, 0xd2, 0x04, 0x09, 0xb1, - 0x00, 0x14, 0xca, 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, 0x68, 0x7e, 0x37, 0x01, 0xcb, 0x7e, 0x27, - 0x01, 0xaf, 0x2e, 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, 0x34, 0x04, 0x00, 0x38, 0x34, 0x7d, 0x02, - 0x2e, 0x05, 0x30, 0x7a, 0x05, 0x30, 0x7a, 0x37, 0x01, 0xcb, 0x7e, 0x37, 0x01, 0xc9, 0x7d, 0x43, - 0x2d, 0x42, 0xbe, 0x44, 0x28, 0x2c, 0x38, 0x3c, 0x7a, 0x47, 0x01, 0xc9, 0x7e, 0x24, 0x03, 0x00, - 0x2e, 0x27, 0x01, 0xaf, 0x1b, 0x38, 0x20, 0x0b, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x02, - 0x6a, 0x63, 0x75, 0x2f, 0x99, 0x12, 0x73, 0x35, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, - 0x00, 0x04, 0x30, 0x3b, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, - 0x13, 0x22, 0x80, 0x7f, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x9e, 0x44, 0x28, 0x2d, 0x9d, 0x24, - 0x7e, 0x64, 0x03, 0x00, 0x2e, 0x67, 0x01, 0xaf, 0x9e, 0x24, 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, - 0x60, 0x0b, 0x35, 0x12, 0x6a, 0x63, 0x7e, 0x34, 0x24, 0x2d, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, - 0x01, 0xc9, 0x02, 0x6a, 0x63, 0x7a, 0x39, 0xc0, 0x7e, 0x34, 0x24, 0x2d, 0x7a, 0x39, 0xd0, 0x0b, - 0x34, 0x1b, 0x44, 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, 0x54, 0x0f, 0x23, 0x23, 0x23, 0x44, 0x03, - 0x7a, 0x69, 0xb0, 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, 0x2f, 0x93, 0x12, 0x73, 0x35, 0x7a, 0x71, - 0x2f, 0x12, 0x73, 0x35, 0xbd, 0x04, 0x68, 0x2b, 0x7a, 0x07, 0x01, 0xc9, 0x7e, 0x47, 0x01, 0xcb, - 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xcb, 0x2e, 0x35, 0x30, 0x7a, 0x35, 0x30, 0x22, 0xd2, 0x04, 0x09, - 0xb1, 0x00, 0x14, 0x20, 0xe0, 0x13, 0x22, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0x28, 0x7e, 0x04, 0x24, - 0x2d, 0x80, 0x2a, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0xcf, 0x7e, 0x07, 0x01, 0xcb, 0x7e, 0x24, 0x03, - 0xfe, 0x9d, 0x20, 0x28, 0x40, 0x7e, 0x07, 0x01, 0xc9, 0x7e, 0x44, 0x28, 0x2d, 0x7d, 0x60, 0x0b, - 0x04, 0xbd, 0x04, 0x68, 0xd2, 0x7d, 0x70, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd0, 0x7d, 0x54, 0x9d, - 0x50, 0xbd, 0x25, 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, - 0x1f, 0xb4, 0x01, 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, 0x7a, 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, - 0x78, 0xe7, 0x02, 0x51, 0xa5, 0x75, 0x2f, 0x99, 0x12, 0x73, 0x35, 0x09, 0xb1, 0x00, 0x04, 0x54, - 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3b, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, - 0x00, 0x10, 0xd2, 0x13, 0x22, 0xda, 0xb8, 0x30, 0xe0, 0xd8, 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, - 0x12, 0x51, 0xa5, 0xda, 0xb8, 0x02, 0x52, 0xcc, 0x09, 0xb1, 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, - 0x2f, 0x90, 0x12, 0x73, 0x35, 0xf5, 0x2f, 0x12, 0x73, 0x35, 0xa5, 0xfd, 0x5e, 0x50, 0x0a, 0x68, - 0x1d, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x5b, 0x80, 0x02, 0xc2, 0x5b, 0xa5, 0xfd, - 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x53, 0x80, 0x02, 0xc2, 0x53, 0x12, 0x43, 0x02, 0x02, 0x61, - 0x13, 0x75, 0x2f, 0x91, 0x12, 0x73, 0x35, 0x09, 0xb1, 0x00, 0x14, 0x7a, 0xb1, 0x2f, 0x12, 0x73, - 0x35, 0x20, 0xe0, 0x08, 0xd2, 0x04, 0x7e, 0xa0, 0x80, 0x02, 0x61, 0x13, 0xd2, 0x04, 0x30, 0xe1, - 0x06, 0x7e, 0xa0, 0x80, 0x12, 0x61, 0x13, 0xca, 0xb8, 0x5e, 0xb0, 0x1c, 0xda, 0xb8, 0x68, 0x12, - 0x7e, 0xa0, 0xc0, 0x09, 0x61, 0x00, 0x00, 0x12, 0x61, 0x36, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, - 0xdb, 0x22, 0x02, 0x51, 0xf9, 0x75, 0x2f, 0x95, 0x12, 0x73, 0x35, 0x22, 0x75, 0x2f, 0x96, 0x12, - 0x73, 0x35, 0x22, 0x10, 0x0c, 0x01, 0x22, 0x20, 0x2c, 0x03, 0xd2, 0x0c, 0x22, 0x75, 0x2f, 0xa4, - 0x12, 0x73, 0x35, 0x7e, 0x14, 0x84, 0x00, 0x80, 0x06, 0x20, 0x2c, 0x03, 0xd2, 0x0c, 0x22, 0x09, - 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x03, 0x12, 0x55, 0xf9, 0x30, - 0x34, 0x06, 0x20, 0xe6, 0x4f, 0xd2, 0x0c, 0x22, 0x30, 0xe6, 0x02, 0xd2, 0x64, 0x7e, 0x37, 0x01, - 0x81, 0x7e, 0x27, 0x01, 0xa1, 0x9d, 0x32, 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, 0x3a, 0x7a, 0x05, - 0x3a, 0x7a, 0x37, 0x01, 0x81, 0x7e, 0x37, 0x01, 0x61, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x18, - 0x2c, 0x38, 0x68, 0x7a, 0x47, 0x01, 0x61, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, - 0x12, 0x73, 0x35, 0x12, 0x69, 0xf0, 0x10, 0x64, 0xc4, 0x22, 0xc2, 0x64, 0x2d, 0x23, 0x68, 0x78, - 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, 0x01, 0x81, 0xbe, 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, 0x27, - 0x01, 0xa1, 0x28, 0x04, 0x7e, 0x27, 0x01, 0xa1, 0x7e, 0x37, 0x01, 0x81, 0x9d, 0x32, 0x7d, 0x02, - 0x2e, 0x05, 0x3a, 0x7a, 0x05, 0x3a, 0x7a, 0x37, 0x01, 0x81, 0x7e, 0x37, 0x01, 0x61, 0x7d, 0x43, - 0x2d, 0x42, 0xbe, 0x44, 0x18, 0x2c, 0x38, 0x13, 0x7a, 0x47, 0x01, 0x61, 0x75, 0x2f, 0x94, 0x12, - 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x02, 0x69, 0xf0, 0x75, 0x2f, 0x94, 0x12, 0x73, - 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x9e, 0x44, 0x18, 0x2d, 0x9d, 0x24, 0x12, 0x69, 0xf0, - 0x7e, 0x34, 0x14, 0x2d, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0x61, 0x12, 0x69, 0xf0, 0xbe, - 0x25, 0x20, 0x78, 0x03, 0x02, 0x53, 0x76, 0x22, 0xd2, 0x0c, 0x7e, 0x04, 0x14, 0x2d, 0x7a, 0x07, - 0x01, 0x61, 0x7a, 0x07, 0x01, 0x71, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x75, 0x2f, 0x00, 0x12, - 0x73, 0x35, 0x22, 0x75, 0x2f, 0x92, 0x12, 0x73, 0x35, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0xca, - 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, 0x68, 0x7e, 0x37, 0x01, 0xcb, 0x7e, 0x27, 0x01, 0xb1, 0x2e, - 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, 0x34, 0x04, 0x00, 0x38, 0x34, 0x7d, 0x02, 0x2e, 0x05, 0x30, - 0x7a, 0x05, 0x30, 0x7a, 0x37, 0x01, 0xcb, 0x7e, 0x37, 0x01, 0xc9, 0x7d, 0x43, 0x2d, 0x42, 0xbe, - 0x44, 0x28, 0x2c, 0x38, 0x3c, 0x7a, 0x47, 0x01, 0xc9, 0x7e, 0x24, 0x04, 0x00, 0x2e, 0x27, 0x01, - 0xb1, 0x1b, 0x38, 0x20, 0x0b, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x02, 0x6a, 0x63, 0x75, - 0x2f, 0x99, 0x12, 0x73, 0x35, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, - 0x3c, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x14, 0x22, 0x80, - 0x7f, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x9e, 0x44, 0x28, 0x2d, 0x9d, 0x24, 0x7e, 0x64, 0x04, - 0x00, 0x2e, 0x67, 0x01, 0xb1, 0x9e, 0x24, 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, 0x35, - 0x12, 0x6a, 0x63, 0x7e, 0x34, 0x24, 0x2d, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xc9, 0x02, - 0x6a, 0x63, 0x7a, 0x39, 0xc0, 0x7e, 0x34, 0x24, 0x2d, 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, 0x44, - 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, 0x54, 0x0f, 0x23, 0x23, 0x23, 0x44, 0x04, 0x7a, 0x69, 0xb0, - 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, 0x2f, 0x93, 0x12, 0x73, 0x35, 0x7a, 0x71, 0x2f, 0x12, 0x73, - 0x35, 0xbd, 0x04, 0x68, 0x2b, 0x7a, 0x07, 0x01, 0xc9, 0x7e, 0x47, 0x01, 0xcb, 0x2d, 0x43, 0x7a, - 0x47, 0x01, 0xcb, 0x2e, 0x35, 0x30, 0x7a, 0x35, 0x30, 0x22, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, - 0x20, 0xe0, 0x13, 0x22, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0x28, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0x2a, - 0x7e, 0x04, 0x24, 0x2d, 0x80, 0xcf, 0x7e, 0x07, 0x01, 0xcb, 0x7e, 0x24, 0x03, 0xfe, 0x9d, 0x20, - 0x28, 0x40, 0x7e, 0x07, 0x01, 0xc9, 0x7e, 0x44, 0x28, 0x2d, 0x7d, 0x60, 0x0b, 0x04, 0xbd, 0x04, - 0x68, 0xd2, 0x7d, 0x70, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd0, 0x7d, 0x54, 0x9d, 0x50, 0xbd, 0x25, - 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, 0x01, - 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, 0x7a, 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, 0x02, - 0x54, 0xd2, 0x75, 0x2f, 0x99, 0x12, 0x73, 0x35, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, - 0x00, 0x04, 0x30, 0x3c, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, - 0x14, 0x22, 0xda, 0xb8, 0x30, 0xe0, 0xd8, 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, 0x12, 0x54, 0xd2, - 0xda, 0xb8, 0x02, 0x55, 0xf9, 0x09, 0xb1, 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, 0x2f, 0x90, 0x12, - 0x73, 0x35, 0xf5, 0x2f, 0x12, 0x73, 0x35, 0xa5, 0xfd, 0x5e, 0x50, 0x0a, 0x68, 0x1d, 0xa5, 0xfd, - 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x5c, 0x80, 0x02, 0xc2, 0x5c, 0xa5, 0xfd, 0x5e, 0x50, 0x80, - 0x68, 0x04, 0xd2, 0x54, 0x80, 0x02, 0xc2, 0x54, 0x12, 0x43, 0x19, 0x02, 0x61, 0x13, 0x75, 0x2f, - 0x91, 0x12, 0x73, 0x35, 0x09, 0xb1, 0x00, 0x14, 0x7a, 0xb1, 0x2f, 0x12, 0x73, 0x35, 0x20, 0xe0, - 0x08, 0xd2, 0x04, 0x7e, 0xa0, 0x80, 0x02, 0x61, 0x13, 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, - 0x80, 0x12, 0x61, 0x13, 0xca, 0xb8, 0x5e, 0xb0, 0x1c, 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, - 0x09, 0x61, 0x00, 0x00, 0x12, 0x61, 0x36, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, - 0x55, 0x26, 0x75, 0x2f, 0x95, 0x12, 0x73, 0x35, 0x22, 0x75, 0x2f, 0x96, 0x12, 0x73, 0x35, 0x22, - 0x10, 0x0d, 0x01, 0x22, 0x20, 0x2d, 0x03, 0xd2, 0x0d, 0x22, 0x75, 0x2f, 0xa5, 0x12, 0x73, 0x35, - 0x7e, 0x14, 0x85, 0x00, 0x80, 0x06, 0x20, 0x2d, 0x03, 0xd2, 0x0d, 0x22, 0x09, 0xb1, 0x00, 0x14, - 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x03, 0x12, 0x59, 0x26, 0x30, 0x35, 0x06, 0x20, - 0xe6, 0x4f, 0xd2, 0x0d, 0x22, 0x30, 0xe6, 0x02, 0xd2, 0x65, 0x7e, 0x37, 0x01, 0x83, 0x7e, 0x27, - 0x01, 0xa3, 0x9d, 0x32, 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, 0x3c, 0x7a, 0x05, 0x3c, 0x7a, 0x37, - 0x01, 0x83, 0x7e, 0x37, 0x01, 0x63, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x1c, 0x2c, 0x38, 0x68, - 0x7a, 0x47, 0x01, 0x63, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, - 0x12, 0x69, 0xf0, 0x10, 0x65, 0xc4, 0x22, 0xc2, 0x65, 0x2d, 0x23, 0x68, 0x78, 0x6d, 0x33, 0x80, - 0x1a, 0x7e, 0x27, 0x01, 0x83, 0xbe, 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, 0x27, 0x01, 0xa3, 0x28, - 0x04, 0x7e, 0x27, 0x01, 0xa3, 0x7e, 0x37, 0x01, 0x83, 0x9d, 0x32, 0x7d, 0x02, 0x2e, 0x05, 0x3c, - 0x7a, 0x05, 0x3c, 0x7a, 0x37, 0x01, 0x83, 0x7e, 0x37, 0x01, 0x63, 0x7d, 0x43, 0x2d, 0x42, 0xbe, - 0x44, 0x1c, 0x2c, 0x38, 0x13, 0x7a, 0x47, 0x01, 0x63, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, - 0x51, 0x2f, 0x12, 0x73, 0x35, 0x02, 0x69, 0xf0, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, - 0x2f, 0x12, 0x73, 0x35, 0x9e, 0x44, 0x1c, 0x2d, 0x9d, 0x24, 0x12, 0x69, 0xf0, 0x7e, 0x34, 0x18, - 0x2d, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0x63, 0x12, 0x69, 0xf0, 0xbe, 0x25, 0x20, 0x78, - 0x03, 0x02, 0x56, 0xa3, 0x22, 0xd2, 0x0d, 0x7e, 0x04, 0x18, 0x2d, 0x7a, 0x07, 0x01, 0x63, 0x7a, - 0x07, 0x01, 0x73, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x75, 0x2f, 0x00, 0x12, 0x73, 0x35, 0x22, - 0x75, 0x2f, 0x92, 0x12, 0x73, 0x35, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x82, - 0xda, 0xb8, 0x78, 0x68, 0x7e, 0x37, 0x01, 0xcb, 0x7e, 0x27, 0x01, 0xb3, 0x2e, 0x24, 0x00, 0x02, - 0x2d, 0x32, 0xbe, 0x34, 0x04, 0x00, 0x38, 0x34, 0x7d, 0x02, 0x2e, 0x05, 0x30, 0x7a, 0x05, 0x30, - 0x7a, 0x37, 0x01, 0xcb, 0x7e, 0x37, 0x01, 0xc9, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x28, 0x2c, - 0x38, 0x3c, 0x7a, 0x47, 0x01, 0xc9, 0x7e, 0x24, 0x05, 0x00, 0x2e, 0x27, 0x01, 0xb3, 0x1b, 0x38, - 0x20, 0x0b, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x02, 0x6a, 0x63, 0x75, 0x2f, 0x99, 0x12, - 0x73, 0x35, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3d, 0x0a, 0x09, - 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x15, 0x22, 0x80, 0x7f, 0x7a, 0x51, - 0x2f, 0x12, 0x73, 0x35, 0x9e, 0x44, 0x28, 0x2d, 0x9d, 0x24, 0x7e, 0x64, 0x05, 0x00, 0x2e, 0x67, - 0x01, 0xb3, 0x9e, 0x24, 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, 0x35, 0x12, 0x6a, 0x63, - 0x7e, 0x34, 0x24, 0x2d, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xc9, 0x02, 0x6a, 0x63, 0x7a, - 0x39, 0xc0, 0x7e, 0x34, 0x24, 0x2d, 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, 0x44, 0x80, 0xe5, 0x9d, - 0x32, 0x7c, 0xb6, 0x54, 0x0f, 0x23, 0x23, 0x23, 0x44, 0x05, 0x7a, 0x69, 0xb0, 0x7a, 0x79, 0x70, - 0x0b, 0x35, 0x75, 0x2f, 0x93, 0x12, 0x73, 0x35, 0x7a, 0x71, 0x2f, 0x12, 0x73, 0x35, 0xbd, 0x04, - 0x68, 0x2b, 0x7a, 0x07, 0x01, 0xc9, 0x7e, 0x47, 0x01, 0xcb, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xcb, - 0x2e, 0x35, 0x30, 0x7a, 0x35, 0x30, 0x22, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0x13, - 0x22, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0x28, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0x2a, 0x7e, 0x04, 0x24, - 0x2d, 0x80, 0xcf, 0x7e, 0x07, 0x01, 0xcb, 0x7e, 0x24, 0x03, 0xfe, 0x9d, 0x20, 0x28, 0x40, 0x7e, - 0x07, 0x01, 0xc9, 0x7e, 0x44, 0x28, 0x2d, 0x7d, 0x60, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd2, 0x7d, - 0x70, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd0, 0x7d, 0x54, 0x9d, 0x50, 0xbd, 0x25, 0x40, 0x02, 0x7d, - 0x25, 0x7d, 0x32, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, 0x01, 0x31, 0xda, 0xb8, - 0x7e, 0x19, 0xb0, 0x7a, 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, 0x02, 0x57, 0xff, 0x75, - 0x2f, 0x99, 0x12, 0x73, 0x35, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, - 0x3d, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x15, 0x22, 0xda, - 0xb8, 0x30, 0xe0, 0xd8, 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, 0x12, 0x57, 0xff, 0xda, 0xb8, 0x02, - 0x59, 0x26, 0x09, 0xb1, 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, 0x2f, 0x90, 0x12, 0x73, 0x35, 0xf5, - 0x2f, 0x12, 0x73, 0x35, 0xa5, 0xfd, 0x5e, 0x50, 0x0a, 0x68, 0x1d, 0xa5, 0xfd, 0x5e, 0x50, 0x20, - 0x68, 0x04, 0xd2, 0x5d, 0x80, 0x02, 0xc2, 0x5d, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, - 0x55, 0x80, 0x02, 0xc2, 0x55, 0x12, 0x43, 0x30, 0x02, 0x61, 0x13, 0x75, 0x2f, 0x91, 0x12, 0x73, - 0x35, 0x09, 0xb1, 0x00, 0x14, 0x7a, 0xb1, 0x2f, 0x12, 0x73, 0x35, 0x20, 0xe0, 0x08, 0xd2, 0x04, - 0x7e, 0xa0, 0x80, 0x02, 0x61, 0x13, 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, 0x12, 0x61, - 0x13, 0xca, 0xb8, 0x5e, 0xb0, 0x1c, 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, 0x61, 0x00, - 0x00, 0x12, 0x61, 0x36, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x58, 0x53, 0x75, - 0x2f, 0x95, 0x12, 0x73, 0x35, 0x22, 0x75, 0x2f, 0x96, 0x12, 0x73, 0x35, 0x22, 0x10, 0x0e, 0x01, - 0x22, 0x20, 0x2e, 0x03, 0xd2, 0x0e, 0x22, 0x75, 0x2f, 0xa6, 0x12, 0x73, 0x35, 0x7e, 0x14, 0x86, - 0x00, 0x80, 0x06, 0x20, 0x2e, 0x03, 0xd2, 0x0e, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x5e, - 0xb0, 0x1e, 0xda, 0xb8, 0x68, 0x03, 0x12, 0x5c, 0x53, 0x30, 0x36, 0x06, 0x20, 0xe6, 0x4f, 0xd2, - 0x0e, 0x22, 0x30, 0xe6, 0x02, 0xd2, 0x66, 0x7e, 0x37, 0x01, 0x85, 0x7e, 0x27, 0x01, 0xa5, 0x9d, - 0x32, 0x40, 0x31, 0x7d, 0x02, 0x2e, 0x05, 0x3e, 0x7a, 0x05, 0x3e, 0x7a, 0x37, 0x01, 0x85, 0x7e, - 0x37, 0x01, 0x65, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x20, 0x2c, 0x38, 0x68, 0x7a, 0x47, 0x01, - 0x65, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x12, 0x69, 0xf0, - 0x10, 0x66, 0xc4, 0x22, 0xc2, 0x66, 0x2d, 0x23, 0x68, 0x78, 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, - 0x01, 0x85, 0xbe, 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, 0x27, 0x01, 0xa5, 0x28, 0x04, 0x7e, 0x27, - 0x01, 0xa5, 0x7e, 0x37, 0x01, 0x85, 0x9d, 0x32, 0x7d, 0x02, 0x2e, 0x05, 0x3e, 0x7a, 0x05, 0x3e, - 0x7a, 0x37, 0x01, 0x85, 0x7e, 0x37, 0x01, 0x65, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x20, 0x2c, - 0x38, 0x13, 0x7a, 0x47, 0x01, 0x65, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, - 0x73, 0x35, 0x02, 0x69, 0xf0, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, - 0x35, 0x9e, 0x44, 0x20, 0x2d, 0x9d, 0x24, 0x12, 0x69, 0xf0, 0x7e, 0x34, 0x1c, 0x2d, 0x7d, 0x24, - 0x2d, 0x43, 0x7a, 0x47, 0x01, 0x65, 0x12, 0x69, 0xf0, 0xbe, 0x25, 0x20, 0x78, 0x03, 0x02, 0x59, - 0xd0, 0x22, 0xd2, 0x0e, 0x7e, 0x04, 0x1c, 0x2d, 0x7a, 0x07, 0x01, 0x65, 0x7a, 0x07, 0x01, 0x75, - 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x75, 0x2f, 0x00, 0x12, 0x73, 0x35, 0x22, 0x75, 0x2f, 0x92, - 0x12, 0x73, 0x35, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, - 0x68, 0x7e, 0x37, 0x01, 0xcb, 0x7e, 0x27, 0x01, 0xb5, 0x2e, 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, - 0x34, 0x04, 0x00, 0x38, 0x34, 0x7d, 0x02, 0x2e, 0x05, 0x30, 0x7a, 0x05, 0x30, 0x7a, 0x37, 0x01, - 0xcb, 0x7e, 0x37, 0x01, 0xc9, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x28, 0x2c, 0x38, 0x3c, 0x7a, - 0x47, 0x01, 0xc9, 0x7e, 0x24, 0x06, 0x00, 0x2e, 0x27, 0x01, 0xb5, 0x1b, 0x38, 0x20, 0x0b, 0x35, - 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x02, 0x6a, 0x63, 0x75, 0x2f, 0x99, 0x12, 0x73, 0x35, 0x09, - 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3e, 0x0a, 0x09, 0xb1, 0x00, 0x10, - 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x16, 0x22, 0x80, 0x7f, 0x7a, 0x51, 0x2f, 0x12, 0x73, - 0x35, 0x9e, 0x44, 0x28, 0x2d, 0x9d, 0x24, 0x7e, 0x64, 0x06, 0x00, 0x2e, 0x67, 0x01, 0xb5, 0x9e, - 0x24, 0x00, 0x02, 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, 0x35, 0x12, 0x6a, 0x63, 0x7e, 0x34, 0x24, - 0x2d, 0x7d, 0x24, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xc9, 0x02, 0x6a, 0x63, 0x7a, 0x39, 0xc0, 0x7e, - 0x34, 0x24, 0x2d, 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, 0x44, 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, - 0x54, 0x0f, 0x23, 0x23, 0x23, 0x44, 0x06, 0x7a, 0x69, 0xb0, 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, - 0x2f, 0x93, 0x12, 0x73, 0x35, 0x7a, 0x71, 0x2f, 0x12, 0x73, 0x35, 0xbd, 0x04, 0x68, 0x2b, 0x7a, - 0x07, 0x01, 0xc9, 0x7e, 0x47, 0x01, 0xcb, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xcb, 0x2e, 0x35, 0x30, - 0x7a, 0x35, 0x30, 0x22, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0x13, 0x22, 0x7e, 0x04, - 0x24, 0x2d, 0x80, 0x28, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0x2a, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0xcf, - 0x7e, 0x07, 0x01, 0xcb, 0x7e, 0x24, 0x03, 0xfe, 0x9d, 0x20, 0x28, 0x40, 0x7e, 0x07, 0x01, 0xc9, - 0x7e, 0x44, 0x28, 0x2d, 0x7d, 0x60, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd2, 0x7d, 0x70, 0x0b, 0x04, - 0xbd, 0x04, 0x68, 0xd0, 0x7d, 0x54, 0x9d, 0x50, 0xbd, 0x25, 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, - 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, 0x01, 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, - 0x7a, 0x09, 0xb0, 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, 0x02, 0x5b, 0x2c, 0x75, 0x2f, 0x99, 0x12, - 0x73, 0x35, 0x09, 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3e, 0x0a, 0x09, - 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x16, 0x22, 0xda, 0xb8, 0x30, 0xe0, - 0xd8, 0xbd, 0x32, 0x68, 0x07, 0xca, 0xb8, 0x12, 0x5b, 0x2c, 0xda, 0xb8, 0x02, 0x5c, 0x53, 0x09, - 0xb1, 0x00, 0x18, 0x7e, 0xa0, 0x88, 0x75, 0x2f, 0x90, 0x12, 0x73, 0x35, 0xf5, 0x2f, 0x12, 0x73, - 0x35, 0xa5, 0xfd, 0x5e, 0x50, 0x0a, 0x68, 0x1d, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, - 0x5e, 0x80, 0x02, 0xc2, 0x5e, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x56, 0x80, 0x02, - 0xc2, 0x56, 0x12, 0x43, 0x47, 0x02, 0x61, 0x13, 0x75, 0x2f, 0x91, 0x12, 0x73, 0x35, 0x09, 0xb1, - 0x00, 0x14, 0x7a, 0xb1, 0x2f, 0x12, 0x73, 0x35, 0x20, 0xe0, 0x08, 0xd2, 0x04, 0x7e, 0xa0, 0x80, - 0x02, 0x61, 0x13, 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, 0x12, 0x61, 0x13, 0xca, 0xb8, - 0x5e, 0xb0, 0x1c, 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, 0x61, 0x00, 0x00, 0x12, 0x61, - 0x36, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x5b, 0x80, 0x75, 0x2f, 0x95, 0x12, - 0x73, 0x35, 0x22, 0x75, 0x2f, 0x96, 0x12, 0x73, 0x35, 0x22, 0x10, 0x0f, 0x01, 0x22, 0x20, 0x2f, - 0x03, 0xd2, 0x0f, 0x22, 0x75, 0x2f, 0xa7, 0x12, 0x73, 0x35, 0x7e, 0x14, 0x87, 0x00, 0x80, 0x06, - 0x20, 0x2f, 0x03, 0xd2, 0x0f, 0x22, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x5e, 0xb0, 0x1e, 0xda, - 0xb8, 0x68, 0x03, 0x12, 0x5f, 0x80, 0x30, 0x37, 0x06, 0x20, 0xe6, 0x4f, 0xd2, 0x0f, 0x22, 0x30, - 0xe6, 0x02, 0xd2, 0x67, 0x7e, 0x37, 0x01, 0x87, 0x7e, 0x27, 0x01, 0xa7, 0x9d, 0x32, 0x40, 0x31, - 0x7d, 0x02, 0x2e, 0x05, 0x40, 0x7a, 0x05, 0x40, 0x7a, 0x37, 0x01, 0x87, 0x7e, 0x37, 0x01, 0x67, - 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x24, 0x2c, 0x38, 0x68, 0x7a, 0x47, 0x01, 0x67, 0x75, 0x2f, - 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x12, 0x69, 0xf0, 0x10, 0x67, 0xc4, - 0x22, 0xc2, 0x67, 0x2d, 0x23, 0x68, 0x78, 0x6d, 0x33, 0x80, 0x1a, 0x7e, 0x27, 0x01, 0x87, 0xbe, - 0x24, 0x00, 0x00, 0x68, 0x6a, 0xbe, 0x27, 0x01, 0xa7, 0x28, 0x04, 0x7e, 0x27, 0x01, 0xa7, 0x7e, - 0x37, 0x01, 0x87, 0x9d, 0x32, 0x7d, 0x02, 0x2e, 0x05, 0x40, 0x7a, 0x05, 0x40, 0x7a, 0x37, 0x01, - 0x87, 0x7e, 0x37, 0x01, 0x67, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x24, 0x2c, 0x38, 0x13, 0x7a, - 0x47, 0x01, 0x67, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x02, - 0x69, 0xf0, 0x75, 0x2f, 0x94, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x9e, 0x44, - 0x24, 0x2d, 0x9d, 0x24, 0x12, 0x69, 0xf0, 0x7e, 0x34, 0x20, 0x2d, 0x7d, 0x24, 0x2d, 0x43, 0x7a, - 0x47, 0x01, 0x67, 0x12, 0x69, 0xf0, 0xbe, 0x25, 0x20, 0x78, 0x03, 0x02, 0x5c, 0xfd, 0x22, 0xd2, - 0x0f, 0x7e, 0x04, 0x20, 0x2d, 0x7a, 0x07, 0x01, 0x67, 0x7a, 0x07, 0x01, 0x77, 0x75, 0x2f, 0x94, - 0x12, 0x73, 0x35, 0x75, 0x2f, 0x00, 0x12, 0x73, 0x35, 0x22, 0x75, 0x2f, 0x92, 0x12, 0x73, 0x35, - 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0xca, 0xb8, 0x54, 0x82, 0xda, 0xb8, 0x78, 0x68, 0x7e, 0x37, - 0x01, 0xcb, 0x7e, 0x27, 0x01, 0xb7, 0x2e, 0x24, 0x00, 0x02, 0x2d, 0x32, 0xbe, 0x34, 0x04, 0x00, - 0x38, 0x34, 0x7d, 0x02, 0x2e, 0x05, 0x30, 0x7a, 0x05, 0x30, 0x7a, 0x37, 0x01, 0xcb, 0x7e, 0x37, - 0x01, 0xc9, 0x7d, 0x43, 0x2d, 0x42, 0xbe, 0x44, 0x28, 0x2c, 0x38, 0x3c, 0x7a, 0x47, 0x01, 0xc9, - 0x7e, 0x24, 0x07, 0x00, 0x2e, 0x27, 0x01, 0xb7, 0x1b, 0x38, 0x20, 0x0b, 0x35, 0x7a, 0x51, 0x2f, - 0x12, 0x73, 0x35, 0x02, 0x6a, 0x63, 0x75, 0x2f, 0x99, 0x12, 0x73, 0x35, 0x09, 0xb1, 0x00, 0x04, - 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3f, 0x0a, 0x09, 0xb1, 0x00, 0x10, 0x54, 0xfe, 0x19, - 0xb1, 0x00, 0x10, 0xd2, 0x17, 0x22, 0x80, 0x7f, 0x7a, 0x51, 0x2f, 0x12, 0x73, 0x35, 0x9e, 0x44, - 0x28, 0x2d, 0x9d, 0x24, 0x7e, 0x64, 0x07, 0x00, 0x2e, 0x67, 0x01, 0xb7, 0x9e, 0x24, 0x00, 0x02, - 0x40, 0x17, 0x1b, 0x38, 0x60, 0x0b, 0x35, 0x12, 0x6a, 0x63, 0x7e, 0x34, 0x24, 0x2d, 0x7d, 0x24, - 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xc9, 0x02, 0x6a, 0x63, 0x7a, 0x39, 0xc0, 0x7e, 0x34, 0x24, 0x2d, - 0x7a, 0x39, 0xd0, 0x0b, 0x34, 0x1b, 0x44, 0x80, 0xe5, 0x9d, 0x32, 0x7c, 0xb6, 0x54, 0x0f, 0x23, - 0x23, 0x23, 0x44, 0x07, 0x7a, 0x69, 0xb0, 0x7a, 0x79, 0x70, 0x0b, 0x35, 0x75, 0x2f, 0x93, 0x12, - 0x73, 0x35, 0x7a, 0x71, 0x2f, 0x12, 0x73, 0x35, 0xbd, 0x04, 0x68, 0x2b, 0x7a, 0x07, 0x01, 0xc9, - 0x7e, 0x47, 0x01, 0xcb, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xcb, 0x2e, 0x35, 0x30, 0x7a, 0x35, 0x30, - 0x22, 0xd2, 0x04, 0x09, 0xb1, 0x00, 0x14, 0x20, 0xe0, 0x13, 0x22, 0x7e, 0x04, 0x24, 0x2d, 0x80, - 0x28, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0x2a, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0xcf, 0x7e, 0x07, 0x01, - 0xcb, 0x7e, 0x24, 0x03, 0xfe, 0x9d, 0x20, 0x28, 0x40, 0x7e, 0x07, 0x01, 0xc9, 0x7e, 0x44, 0x28, - 0x2d, 0x7d, 0x60, 0x0b, 0x04, 0xbd, 0x04, 0x68, 0xd2, 0x7d, 0x70, 0x0b, 0x04, 0xbd, 0x04, 0x68, - 0xd0, 0x7d, 0x54, 0x9d, 0x50, 0xbd, 0x25, 0x40, 0x02, 0x7d, 0x25, 0x7d, 0x32, 0x09, 0xb1, 0x00, - 0x14, 0xca, 0xb8, 0x54, 0x1f, 0xb4, 0x01, 0x31, 0xda, 0xb8, 0x7e, 0x19, 0xb0, 0x7a, 0x09, 0xb0, - 0x0b, 0x04, 0x1b, 0x24, 0x78, 0xe7, 0x02, 0x5e, 0x59, 0x75, 0x2f, 0x99, 0x12, 0x73, 0x35, 0x09, - 0xb1, 0x00, 0x04, 0x54, 0xfa, 0x19, 0xb1, 0x00, 0x04, 0x30, 0x3f, 0x0a, 0x09, 0xb1, 0x00, 0x10, - 0x54, 0xfe, 0x19, 0xb1, 0x00, 0x10, 0xd2, 0x17, 0x22, 0xda, 0xb8, 0x30, 0xe0, 0xd8, 0xbd, 0x32, - 0x68, 0x07, 0xca, 0xb8, 0x12, 0x5e, 0x59, 0xda, 0xb8, 0x02, 0x5f, 0x80, 0x09, 0xb1, 0x00, 0x18, - 0x7e, 0xa0, 0x88, 0x75, 0x2f, 0x90, 0x12, 0x73, 0x35, 0xf5, 0x2f, 0x12, 0x73, 0x35, 0xa5, 0xfd, - 0x5e, 0x50, 0x0a, 0x68, 0x1d, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x5f, 0x80, 0x02, - 0xc2, 0x5f, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x57, 0x80, 0x02, 0xc2, 0x57, 0x12, - 0x43, 0x5e, 0x02, 0x61, 0x13, 0x75, 0x2f, 0x91, 0x12, 0x73, 0x35, 0x09, 0xb1, 0x00, 0x14, 0x7a, - 0xb1, 0x2f, 0x12, 0x73, 0x35, 0x20, 0xe0, 0x08, 0xd2, 0x04, 0x7e, 0xa0, 0x80, 0x02, 0x61, 0x13, - 0xd2, 0x04, 0x30, 0xe1, 0x06, 0x7e, 0xa0, 0x80, 0x12, 0x61, 0x13, 0xca, 0xb8, 0x5e, 0xb0, 0x1c, - 0xda, 0xb8, 0x68, 0x12, 0x7e, 0xa0, 0xc0, 0x09, 0x61, 0x00, 0x00, 0x12, 0x61, 0x36, 0x09, 0xb1, - 0x00, 0x14, 0x20, 0xe0, 0xdb, 0x22, 0x02, 0x5e, 0xad, 0x75, 0x2f, 0x95, 0x12, 0x73, 0x35, 0x22, - 0x75, 0x2f, 0x96, 0x12, 0x73, 0x35, 0x22, 0x7c, 0x02, 0x7e, 0x14, 0x80, 0x00, 0x4c, 0x20, 0x09, - 0xb1, 0x00, 0x18, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x58, 0x80, 0x02, 0xc2, 0x58, - 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x50, 0x80, 0x02, 0xc2, 0x50, 0x02, 0x60, 0xff, - 0x7c, 0x02, 0x7e, 0x14, 0x80, 0x00, 0x4c, 0x20, 0x09, 0xb1, 0x00, 0x18, 0xa5, 0xfd, 0x5e, 0x50, - 0x20, 0x68, 0x04, 0xd2, 0x59, 0x80, 0x02, 0xc2, 0x59, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, - 0xd2, 0x51, 0x80, 0x02, 0xc2, 0x51, 0x02, 0x60, 0xff, 0x7c, 0x02, 0x7e, 0x14, 0x80, 0x00, 0x4c, - 0x20, 0x09, 0xb1, 0x00, 0x18, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x5a, 0x80, 0x02, - 0xc2, 0x5a, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x52, 0x80, 0x02, 0xc2, 0x52, 0x02, - 0x60, 0xff, 0x7c, 0x02, 0x7e, 0x14, 0x80, 0x00, 0x4c, 0x20, 0x09, 0xb1, 0x00, 0x18, 0xa5, 0xfd, - 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x5b, 0x80, 0x02, 0xc2, 0x5b, 0xa5, 0xfd, 0x5e, 0x50, 0x80, - 0x68, 0x04, 0xd2, 0x53, 0x80, 0x02, 0xc2, 0x53, 0x02, 0x60, 0xff, 0x7c, 0x02, 0x7e, 0x14, 0x80, - 0x00, 0x4c, 0x20, 0x09, 0xb1, 0x00, 0x18, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x5c, - 0x80, 0x02, 0xc2, 0x5c, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x54, 0x80, 0x02, 0xc2, - 0x54, 0x02, 0x60, 0xff, 0x7c, 0x02, 0x7e, 0x14, 0x80, 0x00, 0x4c, 0x20, 0x09, 0xb1, 0x00, 0x18, - 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x5d, 0x80, 0x02, 0xc2, 0x5d, 0xa5, 0xfd, 0x5e, - 0x50, 0x80, 0x68, 0x04, 0xd2, 0x55, 0x80, 0x02, 0xc2, 0x55, 0x02, 0x60, 0xff, 0x7c, 0x02, 0x7e, - 0x14, 0x80, 0x00, 0x4c, 0x20, 0x09, 0xb1, 0x00, 0x18, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, - 0xd2, 0x5e, 0x80, 0x02, 0xc2, 0x5e, 0xa5, 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x56, 0x80, - 0x02, 0xc2, 0x56, 0x02, 0x60, 0xff, 0x7c, 0x02, 0x7e, 0x14, 0x80, 0x00, 0x4c, 0x20, 0x09, 0xb1, - 0x00, 0x18, 0xa5, 0xfd, 0x5e, 0x50, 0x20, 0x68, 0x04, 0xd2, 0x5f, 0x80, 0x02, 0xc2, 0x5f, 0xa5, - 0xfd, 0x5e, 0x50, 0x80, 0x68, 0x04, 0xd2, 0x57, 0x80, 0x02, 0xc2, 0x57, 0x02, 0x60, 0xff, 0x54, - 0xf0, 0xc4, 0xa5, 0xff, 0xc4, 0xa5, 0x4f, 0x75, 0x2f, 0x90, 0x12, 0x73, 0x35, 0xf5, 0x2f, 0x12, - 0x73, 0x35, 0x22, 0xca, 0x19, 0x5e, 0x20, 0x07, 0x4c, 0xa2, 0x7e, 0x74, 0x2c, 0x2d, 0xca, 0x79, - 0x7a, 0x79, 0xa0, 0x0b, 0x74, 0x7a, 0x79, 0xb0, 0x0b, 0x74, 0xda, 0x79, 0x7e, 0x30, 0x02, 0x7e, - 0x64, 0x00, 0x02, 0x02, 0x61, 0x5e, 0xca, 0x19, 0x5e, 0x20, 0x07, 0x4c, 0xa2, 0x7e, 0x74, 0x2c, - 0x2d, 0xca, 0x79, 0x7a, 0x79, 0xa0, 0x0b, 0x74, 0x7a, 0x79, 0xb0, 0x0b, 0x74, 0x7a, 0x79, 0x60, - 0x0b, 0x74, 0xda, 0x79, 0x7e, 0x30, 0x03, 0x7e, 0x64, 0x00, 0x03, 0x02, 0x61, 0x5e, 0xd2, 0x04, - 0x7e, 0x27, 0x01, 0xcb, 0x2d, 0x26, 0xbe, 0x24, 0x04, 0x00, 0x38, 0x2e, 0x7e, 0x07, 0x01, 0xc9, - 0x7e, 0x44, 0x28, 0x2d, 0x7e, 0x79, 0xa0, 0x7a, 0x09, 0xa0, 0x0b, 0x04, 0x0b, 0x74, 0xbd, 0x04, - 0x68, 0x23, 0xa5, 0xdb, 0xef, 0x7a, 0x27, 0x01, 0xcb, 0x7e, 0x25, 0x30, 0x2d, 0x26, 0x7a, 0x25, - 0x30, 0x7a, 0x07, 0x01, 0xc9, 0xda, 0x19, 0xc2, 0xd7, 0x22, 0x75, 0x2f, 0x9a, 0x12, 0x73, 0x35, - 0xda, 0x19, 0xd2, 0xd7, 0x22, 0x7e, 0x04, 0x24, 0x2d, 0x80, 0xd7, 0x48, 0xf1, 0x46, 0x65, 0x47, - 0x5f, 0x49, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x48, 0x56, 0x45, 0x2a, 0x49, 0x6e, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x49, 0x75, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x4c, 0x1e, 0x49, 0x92, 0x4a, - 0x8c, 0x4c, 0x57, 0x45, 0x2a, 0x45, 0x2a, 0x4b, 0x83, 0x45, 0x2a, 0x4c, 0x9b, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x4c, 0xa2, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x4f, 0x4b, 0x4c, 0xbf, 0x4d, - 0xb9, 0x4f, 0x84, 0x45, 0x2a, 0x45, 0x2a, 0x4e, 0xb0, 0x45, 0x2a, 0x4f, 0xc8, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x4f, 0xcf, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x52, 0x78, 0x4f, 0xec, 0x50, - 0xe6, 0x52, 0xb1, 0x45, 0x2a, 0x45, 0x2a, 0x51, 0xdd, 0x45, 0x2a, 0x52, 0xf5, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x52, 0xfc, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x55, 0xa5, 0x53, 0x19, 0x54, - 0x13, 0x55, 0xde, 0x45, 0x2a, 0x45, 0x2a, 0x55, 0x0a, 0x45, 0x2a, 0x56, 0x22, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x56, 0x29, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x58, 0xd2, 0x56, 0x46, 0x57, - 0x40, 0x59, 0x0b, 0x45, 0x2a, 0x45, 0x2a, 0x58, 0x37, 0x45, 0x2a, 0x59, 0x4f, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x59, 0x56, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x5b, 0xff, 0x59, 0x73, 0x5a, - 0x6d, 0x5c, 0x38, 0x45, 0x2a, 0x45, 0x2a, 0x5b, 0x64, 0x45, 0x2a, 0x5c, 0x7c, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x5c, 0x83, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x5f, 0x2c, 0x5c, 0xa0, 0x5d, - 0x9a, 0x5f, 0x65, 0x45, 0x2a, 0x45, 0x2a, 0x5e, 0x91, 0x45, 0x2a, 0x5f, 0xa9, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x5f, 0xb0, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, - 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0x45, 0x2a, 0xca, 0xb8, 0x75, 0x2f, 0x02, - 0x12, 0x73, 0x35, 0x7e, 0xb3, 0x91, 0x03, 0x20, 0xe5, 0x20, 0x30, 0xe0, 0x05, 0x12, 0x6b, 0x05, - 0x80, 0x30, 0x30, 0xe1, 0x05, 0x12, 0x64, 0x86, 0x80, 0x28, 0x30, 0xe2, 0x05, 0x12, 0x63, 0xf5, - 0x80, 0x20, 0x30, 0xe3, 0x1d, 0x12, 0x65, 0x61, 0x80, 0x18, 0x7e, 0xb3, 0x91, 0x04, 0x30, 0xe1, - 0x03, 0x02, 0x67, 0x5f, 0x30, 0xe6, 0x05, 0x12, 0x6c, 0x6a, 0x80, 0x06, 0x20, 0xe2, 0x03, 0x02, - 0x00, 0x80, 0xda, 0xb8, 0x32, 0x75, 0x2f, 0x10, 0x12, 0x73, 0x35, 0xca, 0x0b, 0xca, 0x39, 0xca, - 0x59, 0x74, 0x40, 0x7a, 0xb3, 0x91, 0x00, 0x7e, 0xb3, 0x91, 0x1a, 0x6c, 0xaa, 0xbe, 0xb0, 0x40, - 0x28, 0x0a, 0x12, 0x64, 0x24, 0xda, 0x59, 0xda, 0x39, 0xda, 0x0b, 0x22, 0x74, 0x20, 0x7a, 0xb3, - 0x91, 0x14, 0x80, 0xf1, 0x7e, 0x37, 0x01, 0xc5, 0x2d, 0x35, 0xbe, 0x34, 0x04, 0x00, 0x38, 0x2f, - 0x7a, 0x37, 0x01, 0xc5, 0x7e, 0x37, 0x01, 0xc3, 0x7d, 0x43, 0x2d, 0x45, 0xbe, 0x44, 0x2c, 0x2c, - 0x38, 0x25, 0x7a, 0x47, 0x01, 0xc3, 0x75, 0x2f, 0x11, 0x12, 0x73, 0x35, 0x7a, 0xb1, 0x2f, 0x12, - 0x73, 0x35, 0x12, 0x67, 0x9f, 0x74, 0x20, 0x7a, 0xb3, 0x91, 0x14, 0x12, 0x66, 0x30, 0x22, 0x75, - 0x2f, 0x16, 0x12, 0x73, 0x35, 0x80, 0xf4, 0x75, 0x2f, 0x12, 0x12, 0x73, 0x35, 0x7a, 0xb1, 0x2f, - 0x12, 0x73, 0x35, 0x9e, 0x44, 0x2c, 0x2d, 0x9d, 0x54, 0x12, 0x67, 0x9f, 0x7e, 0x34, 0x28, 0x2d, - 0x7d, 0x54, 0x2d, 0x43, 0x80, 0xbc, 0x75, 0x2f, 0x18, 0x12, 0x73, 0x35, 0xca, 0x09, 0xca, 0x39, - 0xca, 0x2b, 0x74, 0x20, 0x7a, 0xb3, 0x91, 0x00, 0x7e, 0x63, 0x91, 0x1a, 0x74, 0x10, 0x7a, 0xb3, - 0x91, 0x14, 0x7e, 0xb0, 0x80, 0x9c, 0xb6, 0x60, 0x38, 0x6c, 0xaa, 0x7e, 0x37, 0x01, 0xcb, 0x9d, - 0x35, 0x40, 0x37, 0x7a, 0x37, 0x01, 0xcb, 0x7e, 0x37, 0x01, 0xc7, 0x7d, 0x43, 0x2d, 0x45, 0xbe, - 0x44, 0x28, 0x2c, 0x38, 0x3b, 0x7a, 0x47, 0x01, 0xc7, 0x7d, 0x45, 0x12, 0x68, 0xd4, 0x7e, 0xb3, - 0x91, 0x1e, 0x20, 0xe5, 0x13, 0x75, 0x2f, 0x19, 0x12, 0x73, 0x35, 0x7a, 0x91, 0x2f, 0x12, 0x73, - 0x35, 0xda, 0x2b, 0xda, 0x39, 0xda, 0x09, 0x22, 0x80, 0x34, 0x2d, 0x53, 0x6d, 0x33, 0x60, 0x02, - 0x80, 0xc1, 0x7e, 0x04, 0x24, 0x2d, 0x7a, 0x07, 0x01, 0xc9, 0x7a, 0x07, 0x01, 0xc7, 0x80, 0xe1, - 0xca, 0x59, 0x9e, 0x44, 0x28, 0x2d, 0x9d, 0x54, 0x12, 0x68, 0xd4, 0x7e, 0x34, 0x24, 0x2d, 0x7d, - 0x54, 0x2d, 0x43, 0x7a, 0x47, 0x01, 0xc7, 0x12, 0x68, 0xd4, 0xda, 0x49, 0x80, 0xb0, 0x7e, 0x0f, - 0x2c, 0x3e, 0x0b, 0x0c, 0x7a, 0x0f, 0x2c, 0x3e, 0x74, 0x20, 0x7a, 0xb3, 0x91, 0x1e, 0x74, 0x60, - 0x7a, 0xb3, 0x91, 0x1c, 0x74, 0x02, 0x7a, 0xb3, 0x91, 0x12, 0x80, 0xa5, 0x7e, 0x2f, 0x2c, 0x5e, - 0x0b, 0x2c, 0x7a, 0x2f, 0x2c, 0x5e, 0x74, 0x20, 0x7a, 0xb3, 0x91, 0x1e, 0x74, 0x60, 0x7a, 0xb3, - 0x91, 0x1c, 0x74, 0x02, 0x7a, 0xb3, 0x91, 0x12, 0x80, 0x1f, 0xda, 0x2b, 0xda, 0x1b, 0xda, 0x0b, - 0x22, 0x75, 0x2f, 0x28, 0x12, 0x73, 0x35, 0xca, 0x0b, 0xca, 0x1b, 0xca, 0x2b, 0x74, 0x60, 0x7a, - 0xb3, 0x91, 0x00, 0x74, 0x10, 0x7a, 0xb3, 0x91, 0x14, 0x7e, 0xb3, 0x91, 0x1a, 0x70, 0xdb, 0x7e, - 0x0d, 0x30, 0x7e, 0x1d, 0x34, 0x7e, 0x2d, 0x38, 0x7e, 0x3d, 0x3c, 0x7e, 0x85, 0x40, 0x7d, 0x90, - 0x4d, 0x91, 0x4d, 0x92, 0x4d, 0x93, 0x4d, 0x94, 0x4d, 0x95, 0x4d, 0x96, 0x4d, 0x97, 0x4d, 0x98, - 0x68, 0xb8, 0x7a, 0x13, 0x91, 0x17, 0x7a, 0x03, 0x91, 0x17, 0x7a, 0x33, 0x91, 0x17, 0x7a, 0x23, - 0x91, 0x17, 0x7a, 0x53, 0x91, 0x17, 0x7a, 0x43, 0x91, 0x17, 0x7a, 0x73, 0x91, 0x17, 0x7a, 0x63, - 0x91, 0x17, 0x7a, 0x93, 0x91, 0x17, 0x7a, 0x83, 0x91, 0x17, 0x30, 0x73, 0x22, 0x7a, 0xb3, 0x91, - 0x17, 0x7a, 0xa3, 0x91, 0x17, 0x7a, 0xd3, 0x91, 0x17, 0x7a, 0xc3, 0x91, 0x17, 0x7a, 0xf3, 0x91, - 0x17, 0x7a, 0xe3, 0x91, 0x17, 0x7d, 0x78, 0x7a, 0xf3, 0x91, 0x17, 0x7a, 0xe3, 0x91, 0x17, 0x7e, - 0xb3, 0x91, 0x1e, 0x30, 0xe5, 0x03, 0x02, 0x65, 0x3c, 0x75, 0x2f, 0x29, 0x12, 0x73, 0x35, 0x20, - 0x73, 0x08, 0x75, 0x2f, 0x0a, 0x12, 0x73, 0x35, 0x80, 0x06, 0x75, 0x2f, 0x12, 0x12, 0x73, 0x35, - 0x74, 0x80, 0x7a, 0xb3, 0x91, 0x1e, 0x6d, 0x00, 0x7d, 0x10, 0x7a, 0x0d, 0x30, 0x7a, 0x0d, 0x34, - 0x7a, 0x0d, 0x38, 0x7a, 0x0d, 0x3c, 0x7a, 0x05, 0x40, 0xda, 0x2b, 0xda, 0x1b, 0xda, 0x0b, 0x22, - 0x7e, 0x37, 0x01, 0xc5, 0x4d, 0x33, 0x68, 0x3b, 0x7e, 0x07, 0x01, 0xc1, 0x7e, 0x54, 0x2c, 0x2d, - 0x9d, 0x50, 0xbd, 0x35, 0x40, 0x02, 0x7d, 0x35, 0xca, 0x39, 0x7e, 0x65, 0x4b, 0x99, 0x64, 0xda, - 0x39, 0x7e, 0x07, 0x01, 0xc5, 0x9d, 0x03, 0x7a, 0x07, 0x01, 0xc5, 0x2e, 0x37, 0x01, 0xc1, 0x7a, - 0x37, 0x01, 0xc1, 0xbe, 0x34, 0x2c, 0x2c, 0x28, 0xc7, 0x7e, 0x34, 0x28, 0x2d, 0x7a, 0x37, 0x01, - 0xc1, 0x80, 0xbd, 0x22, 0x75, 0x2f, 0x53, 0x12, 0x73, 0x35, 0x7e, 0x15, 0x4d, 0x80, 0x11, 0x75, - 0x2f, 0x51, 0x12, 0x73, 0x35, 0x0b, 0x08, 0x10, 0x0b, 0x05, 0x9e, 0x34, 0x00, 0x02, 0x28, 0x4d, - 0x7c, 0xb2, 0x20, 0xe7, 0x27, 0x54, 0x07, 0x23, 0x0a, 0x2b, 0x49, 0x22, 0x39, 0x1e, 0x7c, 0xb2, - 0x54, 0x78, 0x03, 0x03, 0x03, 0x7c, 0x2b, 0x9d, 0x13, 0x40, 0x1a, 0x68, 0x12, 0x7a, 0x15, 0x4d, - 0x7a, 0x25, 0x4f, 0x7e, 0x64, 0x67, 0x09, 0x7a, 0x65, 0x4b, 0x89, 0x24, 0x02, 0x67, 0x17, 0x7e, - 0x64, 0x66, 0x7f, 0x80, 0xf2, 0x2d, 0x13, 0x9d, 0x31, 0xca, 0x39, 0x7d, 0x31, 0x2d, 0x10, 0xca, - 0x19, 0xca, 0x29, 0x99, 0x24, 0xda, 0x29, 0xda, 0x09, 0xda, 0x39, 0x80, 0xa2, 0x7a, 0x15, 0x4d, - 0x7e, 0x64, 0x66, 0xf5, 0x4d, 0x33, 0x78, 0x09, 0x7c, 0xb2, 0x20, 0xe7, 0x2a, 0x7e, 0x64, 0x66, - 0x74, 0x7a, 0x65, 0x4b, 0x22, 0x75, 0x2f, 0x52, 0x12, 0x73, 0x35, 0x7e, 0x21, 0x4d, 0x7e, 0x09, - 0x30, 0x0b, 0x04, 0x1b, 0x34, 0x78, 0x89, 0x80, 0xd4, 0x75, 0x2f, 0x54, 0x12, 0x73, 0x35, 0x7e, - 0x15, 0x4d, 0x7e, 0x25, 0x4f, 0x80, 0x90, 0x5e, 0x20, 0x07, 0x54, 0x78, 0x7e, 0x44, 0x67, 0x7d, - 0x30, 0xe6, 0x16, 0x4d, 0x33, 0x68, 0x26, 0x1b, 0x34, 0x7e, 0x09, 0x40, 0x0b, 0x04, 0x7e, 0x44, - 0x34, 0xfa, 0x20, 0xe3, 0x04, 0x7e, 0x44, 0x67, 0x85, 0xca, 0x09, 0xca, 0x39, 0x99, 0x44, 0xda, - 0x39, 0xda, 0x09, 0x7e, 0x64, 0x66, 0x7f, 0x4d, 0x33, 0x68, 0xa6, 0x89, 0x64, 0x7a, 0x15, 0x4d, - 0xf5, 0x4f, 0x7e, 0x64, 0x67, 0x58, 0x80, 0x99, 0x7e, 0x15, 0x4d, 0xe5, 0x4f, 0x80, 0xc4, 0xc0, - 0xd0, 0xc0, 0xd1, 0xc0, 0xe0, 0xca, 0x19, 0x75, 0x2f, 0xfe, 0x12, 0x73, 0x35, 0x7e, 0x14, 0x00, - 0x53, 0x02, 0x40, 0x52, 0xda, 0x19, 0xd0, 0xe0, 0xd0, 0xd1, 0xd0, 0xd0, 0x32, 0x03, 0xa5, 0xcb, - 0x19, 0xb1, 0x80, 0x00, 0x22, 0x22, 0x7e, 0x24, 0x00, 0x00, 0x7f, 0xe1, 0x7e, 0xa0, 0x02, 0xa4, - 0x7e, 0x04, 0x68, 0xb1, 0x9d, 0x05, 0x7e, 0xb0, 0x28, 0x7a, 0xb3, 0x95, 0x00, 0x89, 0x04, 0xca, - 0x29, 0xb4, 0x80, 0xe2, 0x7e, 0x24, 0x00, 0x00, 0x7f, 0xe1, 0x7e, 0x00, 0x28, 0x7a, 0x03, 0x95, - 0x00, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0x7e, 0x00, 0x00, 0x7a, 0x03, 0x95, 0x00, 0xda, 0x29, 0x22, 0x7e, 0x24, 0x00, 0x00, 0x7f, - 0xe1, 0x7e, 0xa0, 0x02, 0xa4, 0x7e, 0x04, 0x69, 0xe6, 0x9d, 0x05, 0x7e, 0xb0, 0x38, 0x7a, 0xb3, - 0x95, 0x00, 0x89, 0x04, 0xca, 0x29, 0xb4, 0x80, 0xe2, 0x7e, 0x24, 0x00, 0x00, 0x7f, 0xe1, 0x7e, - 0x00, 0x38, 0x7a, 0x03, 0x95, 0x00, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0x7e, 0x00, 0x00, 0x7a, 0x03, 0x95, 0x00, 0xda, 0x29, 0x22, - 0xca, 0x29, 0xca, 0x19, 0xca, 0x58, 0x7e, 0x24, 0x00, 0x00, 0x7f, 0xe1, 0xda, 0x58, 0x7e, 0x54, - 0x02, 0x20, 0x9c, 0xb5, 0xa4, 0x7e, 0x50, 0x30, 0x5e, 0x20, 0x07, 0x2c, 0x52, 0x7a, 0x53, 0x95, - 0x00, 0x2e, 0x54, 0x6a, 0x17, 0x89, 0x54, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, - 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0x7e, 0x00, 0x00, 0x7a, 0x03, 0x95, 0x00, 0xda, 0x19, - 0xda, 0x29, 0x22, 0xca, 0x19, 0xca, 0x58, 0x7e, 0x24, 0x00, 0x00, 0x7f, 0xe1, 0xda, 0x58, 0x7e, - 0x54, 0x02, 0x38, 0x9c, 0xb5, 0xa4, 0x7e, 0x50, 0x20, 0x5e, 0x20, 0x07, 0x2c, 0x52, 0x7a, 0x53, - 0x95, 0x00, 0x2e, 0x54, 0x6a, 0x88, 0x89, 0x54, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, - 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0xe0, 0xa3, 0x7e, 0x00, 0x00, 0x7a, 0x03, 0x95, 0x00, 0xda, - 0x19, 0x22, 0x02, 0x6b, 0xa8, 0xca, 0x0b, 0xca, 0x1b, 0xca, 0x2b, 0xca, 0x3b, 0xca, 0x4b, 0xca, - 0x5b, 0xca, 0x6b, 0xca, 0x7b, 0xca, 0xeb, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x7e, 0xb3, 0x2c, - 0x7f, 0xb4, 0x00, 0x02, 0x80, 0x1c, 0xb4, 0x01, 0x19, 0x7e, 0xb3, 0x91, 0x14, 0x54, 0x14, 0x68, - 0x05, 0x12, 0x6b, 0x6c, 0x80, 0x23, 0x7e, 0xb3, 0x91, 0x14, 0x30, 0xe5, 0x1c, 0x12, 0x6c, 0xaa, - 0x80, 0x17, 0x7e, 0xb3, 0x91, 0x14, 0x30, 0xe5, 0x05, 0x12, 0x6c, 0xaa, 0x80, 0x0b, 0x7e, 0xb3, - 0x91, 0x14, 0x54, 0x14, 0x68, 0x03, 0x12, 0x6b, 0x6c, 0xda, 0xeb, 0xda, 0x7b, 0xda, 0x6b, 0xda, - 0x5b, 0xda, 0x4b, 0xda, 0x3b, 0xda, 0x2b, 0xda, 0x1b, 0xda, 0x0b, 0x22, 0x20, 0xe4, 0x19, 0x75, - 0x2f, 0x0a, 0x12, 0x73, 0x35, 0x7e, 0xb3, 0x2c, 0x7e, 0x70, 0x0a, 0x7e, 0xb3, 0x2c, 0x7f, 0xb4, - 0x01, 0x1f, 0x02, 0x6c, 0x04, 0x02, 0x71, 0xf2, 0x75, 0x2f, 0x0b, 0x12, 0x73, 0x35, 0x74, 0x14, - 0x7a, 0xb3, 0x91, 0x14, 0x7e, 0xb3, 0x2c, 0x7f, 0xb4, 0x02, 0x0c, 0x12, 0x6b, 0xb4, 0x02, 0x6b, - 0xa8, 0x74, 0x04, 0x7a, 0xb3, 0x91, 0x14, 0x22, 0x7e, 0x00, 0x00, 0x7a, 0x03, 0x2c, 0x7f, 0x7a, - 0x03, 0x2c, 0x80, 0x22, 0x7e, 0xb3, 0x2c, 0x76, 0x54, 0x60, 0x60, 0x05, 0xb4, 0x40, 0x1e, 0x80, - 0x1c, 0x7e, 0xb3, 0x2c, 0x77, 0xb4, 0x05, 0x15, 0x75, 0x2f, 0x71, 0x12, 0x73, 0x35, 0x7e, 0xb3, - 0x2c, 0x79, 0x7e, 0xa0, 0x01, 0x7a, 0xa3, 0x91, 0x06, 0x7a, 0xb3, 0x91, 0x07, 0x22, 0x74, 0x00, - 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x10, 0x7a, 0xb3, 0x91, 0x12, 0x22, 0xbe, 0x57, 0x2c, 0x7c, 0x28, - 0x04, 0x7e, 0x57, 0x2c, 0x7c, 0x7a, 0x0f, 0x2c, 0x82, 0x7a, 0x57, 0x2c, 0x86, 0x74, 0x10, 0x7a, - 0xb3, 0x91, 0x12, 0x22, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x7e, 0xb3, 0x91, 0x1a, 0x70, 0x53, - 0x7e, 0xb3, 0x91, 0x14, 0x20, 0xe4, 0x4c, 0x7e, 0xef, 0x2c, 0x82, 0x7e, 0xf7, 0x2c, 0x86, 0x7e, - 0x07, 0x2c, 0x86, 0x4d, 0x00, 0x68, 0x21, 0x7e, 0x00, 0x00, 0xe0, 0x7a, 0xb3, 0x91, 0x17, 0xa3, - 0xa5, 0x08, 0x1b, 0xf4, 0x68, 0x06, 0xa5, 0xb8, 0x10, 0xf0, 0x80, 0x19, 0x7e, 0xb0, 0x00, 0x7a, - 0xb3, 0x2c, 0x7f, 0xbe, 0x00, 0x10, 0x68, 0x0d, 0x7e, 0xb0, 0x00, 0x7a, 0xb3, 0x2c, 0x7f, 0x74, - 0x80, 0x7a, 0xb3, 0x91, 0x1e, 0x7a, 0xef, 0x2c, 0x82, 0x7a, 0xf7, 0x2c, 0x86, 0x75, 0x2f, 0x06, - 0x12, 0x73, 0x35, 0x74, 0x04, 0x7a, 0xb3, 0x91, 0x14, 0x22, 0xca, 0x0b, 0xca, 0x1b, 0xca, 0x2b, - 0xca, 0x3b, 0xca, 0x4b, 0xca, 0x5b, 0xca, 0x6b, 0xca, 0x7b, 0xca, 0xeb, 0x75, 0x2f, 0x03, 0x12, - 0x73, 0x35, 0x74, 0x00, 0x7a, 0xb3, 0x2c, 0x7e, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x01, - 0x7a, 0xb3, 0x91, 0x12, 0x12, 0x6d, 0x19, 0xda, 0xeb, 0xda, 0x7b, 0xda, 0x6b, 0xda, 0x5b, 0xda, - 0x4b, 0xda, 0x3b, 0xda, 0x2b, 0xda, 0x1b, 0xda, 0x0b, 0x22, 0x75, 0x2f, 0x03, 0x12, 0x73, 0x35, - 0x7e, 0xb3, 0x2c, 0x80, 0xb4, 0x02, 0x11, 0x74, 0x00, 0x7a, 0xb3, 0x2c, 0x80, 0x7a, 0xb3, 0x2c, - 0x7f, 0x74, 0x20, 0x7a, 0xb3, 0x91, 0x14, 0x22, 0xb4, 0x01, 0x46, 0x7e, 0xb3, 0x91, 0x04, 0x20, - 0xe6, 0x42, 0x7e, 0x23, 0x91, 0x1a, 0x7c, 0x32, 0x7e, 0x13, 0x2c, 0x81, 0x2c, 0x21, 0x7a, 0x23, - 0x2c, 0x81, 0x7e, 0x00, 0x00, 0x2e, 0x04, 0x2c, 0x88, 0x7e, 0xb3, 0x91, 0x16, 0x7a, 0x09, 0xb0, - 0x0b, 0x04, 0xa5, 0xdb, 0xf4, 0x74, 0x20, 0x7a, 0xb3, 0x91, 0x14, 0x75, 0x2f, 0x70, 0x12, 0x73, - 0x35, 0x7e, 0xb3, 0x2c, 0x81, 0x7e, 0xa3, 0x2c, 0x7d, 0xbc, 0xab, 0x78, 0x03, 0x12, 0x6d, 0xb9, - 0x22, 0x02, 0x71, 0xf2, 0xda, 0x59, 0x02, 0x6c, 0x7c, 0x74, 0xe0, 0x7a, 0xb3, 0x91, 0x00, 0x7e, - 0x03, 0x91, 0x10, 0x7e, 0x13, 0x91, 0x11, 0x7e, 0x33, 0x91, 0x12, 0x7e, 0x23, 0x91, 0x13, 0x7e, - 0x53, 0x91, 0x14, 0x7e, 0x43, 0x91, 0x15, 0x7e, 0x73, 0x91, 0x16, 0x7e, 0x63, 0x91, 0x17, 0x7a, - 0x0f, 0x2c, 0x76, 0x7a, 0x1f, 0x2c, 0x7a, 0x75, 0x2f, 0x04, 0x12, 0x73, 0x35, 0x7a, 0x01, 0x2f, - 0x12, 0x73, 0x35, 0x7a, 0x11, 0x2f, 0x12, 0x73, 0x35, 0x7a, 0x21, 0x2f, 0x12, 0x73, 0x35, 0x7a, - 0x31, 0x2f, 0x12, 0x73, 0x35, 0x7a, 0x41, 0x2f, 0x12, 0x73, 0x35, 0x7a, 0x51, 0x2f, 0x12, 0x73, - 0x35, 0x7a, 0x61, 0x2f, 0x12, 0x73, 0x35, 0x7a, 0x71, 0x2f, 0x12, 0x73, 0x35, 0x74, 0x00, 0x7a, - 0xb3, 0x91, 0x00, 0x74, 0x40, 0x7a, 0xb3, 0x91, 0x04, 0x12, 0x6d, 0x8d, 0x22, 0x6d, 0x00, 0x7e, - 0x14, 0x01, 0x02, 0x7a, 0x07, 0x2c, 0x86, 0x7a, 0x03, 0x2c, 0x81, 0x7e, 0xb3, 0x2c, 0x76, 0x20, - 0xe7, 0x0f, 0x7a, 0x23, 0x2c, 0x80, 0x7a, 0x33, 0x2c, 0x7f, 0xbe, 0x07, 0x2c, 0x7c, 0x68, 0x09, - 0x22, 0x7a, 0x33, 0x2c, 0x80, 0x7a, 0x23, 0x2c, 0x7f, 0x7e, 0xb3, 0x2c, 0x76, 0x54, 0xe3, 0x23, - 0x23, 0x30, 0xe0, 0x02, 0xd2, 0xe5, 0x30, 0xe7, 0x02, 0xd2, 0xe4, 0x30, 0xe5, 0x06, 0x30, 0xe4, - 0x03, 0x02, 0x71, 0xf2, 0x54, 0x3e, 0xf5, 0xf0, 0x03, 0x54, 0x1f, 0xc3, 0x25, 0xf0, 0x90, 0x6d, - 0xe5, 0x75, 0x84, 0xff, 0x73, 0x02, 0x6f, 0xa0, 0x02, 0x6e, 0x2d, 0x02, 0x70, 0x39, 0x02, 0x70, - 0x54, 0x02, 0x6f, 0x37, 0x02, 0x6e, 0xc2, 0x02, 0x70, 0x85, 0x02, 0x70, 0x85, 0x02, 0x70, 0x88, - 0x02, 0x70, 0x88, 0x02, 0x70, 0x88, 0x02, 0x70, 0x88, 0x02, 0x70, 0x88, 0x02, 0x70, 0x88, 0x02, - 0x70, 0x88, 0x02, 0x70, 0x88, 0x02, 0x70, 0x8e, 0x02, 0x71, 0x60, 0x02, 0x70, 0x8b, 0x02, 0x70, - 0x8b, 0x02, 0x70, 0x8b, 0x02, 0x70, 0x8b, 0x02, 0x70, 0x8b, 0x02, 0x70, 0x8b, 0x74, 0x00, 0x7a, - 0xb3, 0x91, 0x00, 0x74, 0x60, 0x7a, 0xb3, 0x91, 0x1c, 0x7e, 0xb3, 0x2c, 0x77, 0xb4, 0x06, 0x2a, - 0x7e, 0xb3, 0x2c, 0x78, 0x60, 0x79, 0x7c, 0x0b, 0x7e, 0x13, 0x2c, 0x79, 0x7e, 0x17, 0x2c, 0x7a, - 0x75, 0x2f, 0x72, 0x12, 0x73, 0x35, 0x7a, 0x01, 0x2f, 0x12, 0x73, 0x35, 0x7a, 0x11, 0x2f, 0x12, - 0x73, 0x35, 0x12, 0x72, 0x37, 0x40, 0x58, 0x02, 0x6b, 0xeb, 0xb4, 0x08, 0x1c, 0x75, 0x2f, 0x74, - 0x12, 0x73, 0x35, 0x7e, 0xb3, 0x3f, 0xf1, 0x7e, 0x08, 0x2c, 0x88, 0x7a, 0x0c, 0x00, 0x00, 0x7a, - 0x0b, 0xb0, 0x7e, 0x54, 0x00, 0x01, 0x02, 0x6b, 0xeb, 0xb4, 0x00, 0x33, 0x75, 0x2f, 0x75, 0x12, - 0x73, 0x35, 0x7e, 0x08, 0x2c, 0x88, 0x7a, 0x0c, 0x00, 0x00, 0xca, 0x0b, 0x7e, 0xb3, 0x3f, 0xf2, - 0x30, 0xe0, 0x07, 0x74, 0x02, 0x7a, 0x0b, 0xb0, 0x80, 0x05, 0x74, 0x00, 0x7a, 0x0b, 0xb0, 0x0b, - 0x14, 0x74, 0x00, 0x7a, 0x0b, 0xb0, 0x7e, 0x54, 0x00, 0x02, 0xda, 0x0b, 0x02, 0x6b, 0xeb, 0x02, - 0x71, 0xf2, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x60, 0x7a, 0xb3, 0x91, 0x1c, 0x7e, 0xb3, - 0x2c, 0x77, 0xb4, 0x00, 0x5f, 0x75, 0x2f, 0x76, 0x12, 0x73, 0x35, 0x7e, 0xb3, 0x2c, 0x7b, 0x54, - 0x0f, 0xb4, 0x02, 0x05, 0x7e, 0xb0, 0x60, 0x80, 0x17, 0xb4, 0x00, 0x05, 0x7e, 0xb0, 0x00, 0x80, - 0x0f, 0x7e, 0xb3, 0x2c, 0x7b, 0x20, 0xe7, 0x05, 0x7e, 0xb0, 0x40, 0x80, 0x03, 0x7e, 0xb0, 0x20, - 0x7a, 0xb3, 0x91, 0x00, 0x7e, 0xb3, 0x91, 0x11, 0x30, 0xe0, 0x04, 0x74, 0x01, 0x80, 0x02, 0x74, - 0x00, 0x7e, 0x08, 0x2c, 0x88, 0x7a, 0x0c, 0x00, 0x00, 0xca, 0x0b, 0x7a, 0x0b, 0xb0, 0x0b, 0x14, - 0x74, 0x00, 0x7a, 0x0b, 0xb0, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x7e, 0x54, 0x00, 0x02, 0xda, - 0x0b, 0x02, 0x6b, 0xeb, 0x02, 0x71, 0xf2, 0x7e, 0xb3, 0x2c, 0x7b, 0x54, 0x0f, 0xb4, 0x02, 0x05, - 0x7e, 0xb0, 0x60, 0x80, 0x17, 0xb4, 0x00, 0x05, 0x7e, 0xb0, 0x00, 0x80, 0x0f, 0x7e, 0xb3, 0x2c, - 0x7b, 0x20, 0xe7, 0x05, 0x7e, 0xb0, 0x40, 0x80, 0x03, 0x7e, 0xb0, 0x20, 0x7a, 0xb3, 0x91, 0x00, - 0x7e, 0xb3, 0x2c, 0x79, 0xb4, 0x00, 0x26, 0x7e, 0xb3, 0x2c, 0x77, 0xb4, 0x01, 0x0e, 0x75, 0x2f, - 0x77, 0x12, 0x73, 0x35, 0x74, 0x01, 0x7a, 0xb3, 0x91, 0x12, 0x80, 0x1b, 0xb4, 0x03, 0x0e, 0x75, - 0x2f, 0x78, 0x12, 0x73, 0x35, 0x74, 0x01, 0x7a, 0xb3, 0x91, 0x11, 0x80, 0x0a, 0x74, 0x00, 0x7a, - 0xb3, 0x91, 0x00, 0x12, 0x71, 0xf2, 0x22, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x02, 0x6b, 0xde, - 0x7e, 0xb3, 0x2c, 0x77, 0xb4, 0x09, 0x1f, 0x75, 0x2f, 0x79, 0x12, 0x73, 0x35, 0x7e, 0xb3, 0x2c, - 0x79, 0xbe, 0xb3, 0x3f, 0xf1, 0x68, 0x0d, 0xca, 0xb8, 0x12, 0x43, 0x79, 0xda, 0xb8, 0x50, 0x76, - 0x7a, 0xb3, 0x3f, 0xf1, 0x80, 0x6d, 0xb4, 0x05, 0x08, 0x75, 0x2f, 0x7a, 0x12, 0x73, 0x35, 0x80, - 0x62, 0xb4, 0x03, 0x19, 0x75, 0x2f, 0x7b, 0x12, 0x73, 0x35, 0x7e, 0xb3, 0x2c, 0x79, 0xb4, 0x01, - 0x55, 0x7e, 0xb3, 0x3f, 0xf2, 0x44, 0x01, 0x7a, 0xb3, 0x3f, 0xf2, 0x80, 0x46, 0xb4, 0x01, 0x19, - 0x75, 0x2f, 0x7c, 0x12, 0x73, 0x35, 0x7e, 0xb3, 0x2c, 0x79, 0xb4, 0x01, 0x39, 0x7e, 0xb3, 0x3f, - 0xf2, 0x54, 0xfe, 0x7a, 0xb3, 0x3f, 0xf2, 0x80, 0x2a, 0xb4, 0x07, 0x2a, 0x7e, 0xb3, 0x2c, 0x78, - 0x60, 0x24, 0x7c, 0x0b, 0x7e, 0x13, 0x2c, 0x79, 0x7e, 0x17, 0x2c, 0x7a, 0x75, 0x2f, 0x73, 0x12, - 0x73, 0x35, 0x7a, 0x01, 0x2f, 0x12, 0x73, 0x35, 0x7a, 0x11, 0x2f, 0x12, 0x73, 0x35, 0x12, 0x72, - 0x71, 0x40, 0x03, 0x02, 0x6b, 0xde, 0x02, 0x71, 0xf2, 0x7e, 0xb3, 0x2c, 0x77, 0xb4, 0x0b, 0xf6, - 0x75, 0x2f, 0x7d, 0x12, 0x73, 0x35, 0x7e, 0xb3, 0x2c, 0x79, 0x7e, 0xa3, 0x2c, 0x7b, 0x4c, 0xab, - 0x78, 0xe4, 0x80, 0xdf, 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x60, 0x7a, 0xb3, 0x91, 0x1c, - 0x7e, 0xb3, 0x2c, 0x77, 0xb4, 0x0a, 0xcf, 0x75, 0x2f, 0x7e, 0x12, 0x73, 0x35, 0x7e, 0xb3, 0x2c, - 0x79, 0x70, 0xc3, 0x7e, 0x08, 0x2c, 0x88, 0x7a, 0x0c, 0x00, 0x00, 0x7a, 0x0b, 0xb0, 0x7e, 0x54, - 0x00, 0x01, 0x02, 0x6b, 0xeb, 0x02, 0x71, 0xf2, 0x02, 0x71, 0xf2, 0x02, 0x71, 0xf2, 0x7e, 0xb3, - 0x2c, 0x77, 0xb4, 0x04, 0x20, 0x75, 0x2f, 0xc3, 0x12, 0x73, 0x35, 0x7e, 0x04, 0x00, 0x01, 0x7e, - 0x17, 0x2c, 0x78, 0x7e, 0x18, 0x2c, 0x88, 0x7a, 0x1c, 0x00, 0x00, 0x7e, 0x47, 0x2c, 0x7c, 0x12, - 0x73, 0x41, 0x02, 0x71, 0x5a, 0xb4, 0x06, 0x42, 0x75, 0x2f, 0xc1, 0x12, 0x73, 0x35, 0x7e, 0x58, - 0x00, 0x00, 0x7a, 0x5c, 0x00, 0xfe, 0x7d, 0xca, 0x7e, 0xd7, 0x2c, 0x78, 0x7e, 0x78, 0x2c, 0x88, - 0x7a, 0x7c, 0x00, 0x00, 0x7e, 0x77, 0x2c, 0x7c, 0x75, 0x2f, 0xc1, 0x12, 0x73, 0x35, 0xc0, 0xa8, - 0xc2, 0xaf, 0x7e, 0x40, 0x01, 0x7a, 0x43, 0x94, 0x00, 0x12, 0x73, 0x7a, 0x7e, 0x43, 0x2c, 0x35, - 0x7a, 0x43, 0x94, 0x00, 0xd0, 0xa8, 0x40, 0x65, 0x80, 0x60, 0xb4, 0x00, 0x24, 0xc2, 0xaf, 0x7e, - 0xb0, 0x01, 0x7a, 0xb3, 0x94, 0x00, 0x7a, 0xb3, 0x2c, 0x35, 0x12, 0x6b, 0xde, 0xe4, 0x8d, 0xef, - 0x8d, 0xef, 0x8d, 0xef, 0xd5, 0xe0, 0xf7, 0xc0, 0xd1, 0xca, 0x02, 0xff, 0xca, 0x06, 0x00, 0x00, - 0x32, 0xb4, 0x09, 0x20, 0x74, 0x03, 0x7a, 0xb3, 0x91, 0x06, 0x7e, 0x23, 0x91, 0x07, 0x7e, 0x57, - 0x2c, 0x78, 0x4d, 0x55, 0x68, 0x05, 0x4e, 0x20, 0x02, 0x80, 0x03, 0x5e, 0x20, 0xfd, 0x7a, 0x23, - 0x91, 0x07, 0x80, 0x16, 0xb4, 0x07, 0x16, 0xc2, 0xaf, 0x7e, 0x07, 0x2c, 0x7a, 0x7e, 0x17, 0x2c, - 0x78, 0xc0, 0xd1, 0xca, 0x18, 0xca, 0x38, 0xca, 0x28, 0x32, 0x02, 0x6b, 0xde, 0x02, 0x71, 0xf2, - 0x74, 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x60, 0x7a, 0xb3, 0x91, 0x1c, 0x7e, 0xb3, 0x2c, 0x77, - 0xb4, 0x03, 0x15, 0x75, 0x2f, 0xc2, 0x12, 0x73, 0x35, 0x7e, 0x04, 0x00, 0x01, 0x7e, 0x17, 0x2c, - 0x78, 0x7e, 0x57, 0x2c, 0x7c, 0x02, 0x6b, 0xeb, 0xb4, 0x05, 0x41, 0x75, 0x2f, 0xc0, 0x12, 0x73, - 0x35, 0xc0, 0xa8, 0xc2, 0xaf, 0x7e, 0x40, 0x01, 0x7a, 0x43, 0x94, 0x00, 0x7e, 0x08, 0x2c, 0x88, - 0x7a, 0x0c, 0x00, 0x00, 0x7e, 0x24, 0x00, 0xfe, 0x7e, 0x37, 0x2c, 0x78, 0x7e, 0x47, 0x2c, 0x7c, - 0x12, 0x73, 0x41, 0x7e, 0x43, 0x2c, 0x35, 0x7a, 0x43, 0x94, 0x00, 0xd0, 0xa8, 0x7e, 0x08, 0x2c, - 0x88, 0x7a, 0x0c, 0x00, 0x00, 0x7e, 0x57, 0x2c, 0x7c, 0x02, 0x6b, 0xeb, 0xb4, 0x01, 0x20, 0x7e, - 0x00, 0x00, 0x7e, 0x10, 0x01, 0x75, 0x2f, 0x72, 0x12, 0x73, 0x35, 0x7a, 0x01, 0x2f, 0x12, 0x73, - 0x35, 0x7a, 0x11, 0x2f, 0x12, 0x73, 0x35, 0x12, 0x72, 0x37, 0x40, 0x03, 0x02, 0x6b, 0xeb, 0x02, - 0x71, 0xf2, 0x75, 0x2f, 0x07, 0x12, 0x73, 0x35, 0x7e, 0xb0, 0x02, 0x7a, 0xb3, 0x90, 0x00, 0x74, - 0x00, 0x7a, 0xb3, 0x91, 0x00, 0x74, 0x40, 0x7a, 0xb3, 0x91, 0x15, 0x74, 0x01, 0x7a, 0xb3, 0x91, - 0x11, 0x7e, 0xb3, 0x91, 0x15, 0x54, 0x60, 0xbe, 0xb0, 0x40, 0x68, 0x08, 0x74, 0x20, 0x7a, 0xb3, - 0x91, 0x15, 0x80, 0xed, 0x74, 0x01, 0x7a, 0xb3, 0x91, 0x12, 0x74, 0x04, 0x7a, 0xb3, 0x91, 0x14, - 0x74, 0xff, 0x7a, 0xb3, 0x2c, 0x7e, 0x22, 0xc0, 0xa8, 0xc2, 0xaf, 0x7e, 0x40, 0x01, 0x7a, 0x43, - 0x94, 0x00, 0x12, 0x72, 0xbe, 0x40, 0x1f, 0x7e, 0x08, 0x2c, 0x88, 0x7a, 0x0c, 0x00, 0x00, 0xca, - 0x0b, 0xca, 0x49, 0x12, 0x73, 0x41, 0xda, 0x59, 0xda, 0x0b, 0x7e, 0x43, 0x2c, 0x35, 0x7a, 0x43, - 0x94, 0x00, 0xd0, 0xa8, 0xc3, 0x22, 0x7e, 0x43, 0x2c, 0x35, 0x7a, 0x43, 0x94, 0x00, 0xd0, 0xa8, - 0x22, 0xc0, 0xa8, 0xc2, 0xaf, 0x7e, 0x40, 0x01, 0x7a, 0x43, 0x94, 0x00, 0x12, 0x72, 0xbe, 0x40, - 0x31, 0x7e, 0x58, 0x00, 0x00, 0x7a, 0x5c, 0x00, 0xfe, 0x7f, 0x61, 0x7e, 0x78, 0x2c, 0x88, 0x7a, - 0x7c, 0x00, 0x00, 0x7e, 0x77, 0x2c, 0x7c, 0xbd, 0x74, 0x78, 0x17, 0x75, 0x2f, 0xc1, 0x12, 0x73, - 0x35, 0x12, 0x73, 0x7a, 0x40, 0x0c, 0x7e, 0x43, 0x2c, 0x35, 0x7a, 0x43, 0x94, 0x00, 0xd0, 0xa8, - 0xc3, 0x22, 0x7e, 0x43, 0x2c, 0x35, 0x7a, 0x43, 0x94, 0x00, 0xd0, 0xa8, 0xd3, 0x22, 0x7e, 0x24, - 0x00, 0xfe, 0x7e, 0x34, 0x7f, 0xca, 0x0b, 0x1a, 0x50, 0xc5, 0xf0, 0x7d, 0x62, 0x7d, 0x75, 0x7d, - 0x87, 0x7e, 0x34, 0x7f, 0xc2, 0x7e, 0x1b, 0xb0, 0x7e, 0x34, 0x7f, 0x03, 0xb4, 0x01, 0x04, 0x7e, - 0x34, 0x7f, 0xcc, 0x7e, 0x1b, 0xb0, 0xbc, 0x0b, 0x50, 0x49, 0x3e, 0x00, 0x3e, 0x00, 0x0a, 0x50, - 0x2d, 0x75, 0x0b, 0x3a, 0x30, 0x69, 0x53, 0x00, 0x02, 0xbd, 0x38, 0x50, 0x02, 0x2d, 0x38, 0xbc, - 0x1b, 0x50, 0x30, 0x3e, 0x10, 0x3e, 0x10, 0x0a, 0x51, 0x2d, 0x35, 0x69, 0x41, 0x00, 0x02, 0x0b, - 0x1a, 0x30, 0xbd, 0x38, 0x50, 0x02, 0x2d, 0x38, 0xbe, 0x44, 0xff, 0xff, 0x78, 0x05, 0x7e, 0x1b, - 0x90, 0x0a, 0x49, 0x4d, 0x44, 0x68, 0x0c, 0xbe, 0x44, 0x00, 0xff, 0x28, 0x04, 0x7e, 0x44, 0x00, - 0xff, 0xc3, 0x22, 0xd3, 0x22, - -// Segment #16, Start Address 00ff7fc6, Length 4 -0xff,0x00,0xc6,0x7f,0x04,0x00, - 0x02, 0x00, 0x03, 0x00, - -// Segment #17, Start Address 00ff7335, Length 328 -0xff,0x00,0x35,0x73,0x48,0x01, - 0xca, 0x08, 0x7e, 0x01, 0x2f, 0x7a, 0x03, 0x3f, 0xf0, 0xda, 0x08, 0x22, 0x7e, 0x1b, 0xc0, 0x7a, - 0x0b, 0xc0, 0x0b, 0x14, 0x0b, 0x34, 0x1b, 0x44, 0x78, 0xf2, 0x22, 0x7f, 0x6f, 0x7f, 0xf0, 0x1b, - 0xfc, 0x7c, 0x54, 0x7d, 0x32, 0x80, 0x08, 0xca, 0x1b, 0xca, 0x1b, 0xca, 0x1b, 0xca, 0x1b, 0x9e, - 0x44, 0x00, 0x10, 0x50, 0xf2, 0x2e, 0x44, 0x00, 0x10, 0x68, 0x06, 0xca, 0x48, 0x1b, 0x44, 0x78, - 0xfa, 0x7f, 0xf6, 0x89, 0xe4, 0xca, 0x6b, 0x5e, 0xd4, 0x00, 0x3f, 0x68, 0x20, 0x7e, 0x84, 0x00, - 0x40, 0x9d, 0x8d, 0xda, 0x6b, 0xbd, 0x87, 0x38, 0x16, 0xca, 0x79, 0x7d, 0x78, 0x12, 0x73, 0xa4, - 0xda, 0x79, 0x40, 0x08, 0x9d, 0x78, 0x68, 0x02, 0x80, 0x05, 0xc2, 0xd7, 0x22, 0xda, 0x6b, 0x7e, - 0xc0, 0x03, 0x7e, 0xd0, 0x00, 0x7a, 0xd3, 0x90, 0x00, 0x74, 0xaa, 0x39, 0xb5, 0x55, 0x55, 0x74, - 0x55, 0x39, 0xb5, 0x2a, 0xaa, 0x74, 0xa0, 0x39, 0xb5, 0x55, 0x55, 0x7e, 0x04, 0x00, 0x40, 0x9d, - 0x70, 0x50, 0x06, 0x2d, 0x70, 0x7d, 0x07, 0x6d, 0x77, 0x7c, 0x31, 0x7e, 0x7b, 0x00, 0x7a, 0x6b, - 0x00, 0x0b, 0x7c, 0x0b, 0x6c, 0xa5, 0xd9, 0xf3, 0x7f, 0x16, 0x1b, 0x1c, 0x7e, 0x54, 0x27, 0x10, - 0x7e, 0x1b, 0x10, 0xbc, 0x10, 0x68, 0x06, 0x1b, 0x54, 0x78, 0xf5, 0x80, 0x2f, 0x6d, 0x00, 0x7c, - 0x20, 0x7f, 0x16, 0x9f, 0x10, 0x7f, 0x27, 0x9f, 0x20, 0x7e, 0x2b, 0x00, 0x7e, 0x1b, 0x10, 0xbc, - 0x01, 0x78, 0x19, 0x0b, 0x2c, 0x0b, 0x1c, 0xa5, 0xdb, 0xef, 0x7c, 0xb6, 0x20, 0xe0, 0x06, 0x6c, - 0xdc, 0x7a, 0xd3, 0x90, 0x00, 0x4d, 0x77, 0x78, 0x90, 0xc2, 0xd7, 0x22, 0xd2, 0xd7, 0x22, 0x00, - 0x04, 0x00, 0x04, 0x00, 0x00, 0x06, 0x04, 0x02, 0x04, 0x00, 0x02, 0x01, 0x04, 0x01, 0x02, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x02, 0x02, 0x04, 0x00, 0x08, 0x10, - 0x02, 0x10, 0x04, 0x02, 0x08, 0x00, 0x01, 0x01, 0x08, 0x7e, 0x18, 0x7f, 0xbd, 0x7a, 0x1c, 0x00, - 0xfe, 0x0b, 0x1a, 0x00, 0x5e, 0x10, 0x1f, 0xbe, 0x10, 0x14, 0x38, 0x1a, 0x0a, 0x51, 0x23, 0x7e, - 0x18, 0x74, 0x24, 0x7a, 0x1c, 0x00, 0xff, 0x2d, 0x35, 0x0b, 0x1a, 0x50, 0x60, 0x08, 0xa5, 0xb8, - 0x02, 0x03, 0x4e, 0xa0, 0x08, 0x22, 0x80, 0xfe, -}; - -static struct edge_firmware_version_info IMAGE_VERSION_NAME = { - 2, 0, 3 }; // Major, Minor, Build - -#undef IMAGE_VERSION_NAME - -#undef IMAGE_ARRAY_NAME - diff --git a/firmware/Makefile b/firmware/Makefile index 5ed36ae1a414..be3a9e97d569 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -59,6 +59,8 @@ fw-shipped- := keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \ keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw endif fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw +fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \ + edgeport/down.fw edgeport/down2.fw fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \ # whiteheat_loader_debug.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw diff --git a/firmware/WHENCE b/firmware/WHENCE index b14b86c8fb51..8eada2dbd562 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -275,3 +275,21 @@ Licence: Unknown Found in hex form in kernel source. -------------------------------------------------------------------------- + +Driver: USB_SERIAL_EDGEPORT - USB Inside Out Edgeport Serial Driver + +File: edgeport/boot.fw +File: edgeport/boot2.fw +File: edgeport/down.fw +File: edgeport/down2.fw + +Licence: Allegedly GPLv2+, but no source visible. Marked: +//************************************************************** +//* Edgeport/4 Binary Image +//* Generated by HEX2C v1.06 +//* Copyright (C) 1998 Inside Out Networks, All rights reserved. +//************************************************************** + +Found in hex form in kernel source. + +-------------------------------------------------------------------------- diff --git a/firmware/edgeport/boot.H16 b/firmware/edgeport/boot.H16 new file mode 100644 index 000000000000..4bf8e91a975a --- /dev/null +++ b/firmware/edgeport/boot.H16 @@ -0,0 +1,29 @@ +:0004000000010C0002ED +:000200000400FFFB +:000600000002008002000373 +:0003000B0002000BE5 +:00030013000201B82F +:0003001B0002001BC5 +:0003002300020023B5 +:0003002B0002002BA5 +:000300330002003395 +:0003003B0002003B85 +:00030043000201BDFA +:0003004B000201D0DF +:000300530002012186 +:0003007B0002007B05 +: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 +:00011BCA00001A +: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 +:00407FC00040010200CA1B010C0200007C0000010000000000000000000000000000000000000000000000000000000000000000000000000000000000F17F0000000000005D +: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 +:0000000001FF +//************************************************************** +//* Edgeport/4 Binary Image +//* Generated by HEX2C v1.06 +//* Copyright (C) 1998 Inside Out Networks, All rights reserved. +//* This program is free software; you can redistribute it and/or modify +//* it under the terms of the GNU General Public License as published by +//* the Free Software Foundation; either version 2 of the License, or +//* (at your option) any later version. +//************************************************************** diff --git a/firmware/edgeport/boot2.H16 b/firmware/edgeport/boot2.H16 new file mode 100644 index 000000000000..8b14295e1f3e --- /dev/null +++ b/firmware/edgeport/boot2.H16 @@ -0,0 +1,28 @@ +:000400000002000003F7 +:000200000400FFFB +:000600000002008002000373 +:0003000B0002000BE5 +:000300130002025690 +:0003001B0002001BC5 +:0003002300020023B5 +:0003002B0002002BA5 +:000300330002003395 +:0003003B0002003B85 +:000300430002004375 +:0003004B0002004B65 +:00030053000201F5B2 +:0003007B0002007B05 +: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 +: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 +:00407FC00040010200D73102000300007C0000010000000000000000000000000000000000000000000000000000000000000000000000000000000000F17F00000000000044 +: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 +:0000000001FF +//************************************************************** +//* Edgeport/4 Binary Image +//* Generated by HEX2C v1.06 +//* Copyright (C) 1998 Inside Out Networks, All rights reserved. +//* This program is free software; you can redistribute it and/or modify +//* it under the terms of the GNU General Public License as published by +//* the Free Software Foundation; either version 2 of the License, or +//* (at your option) any later version. +//************************************************************** diff --git a/firmware/edgeport/down.H16 b/firmware/edgeport/down.H16 new file mode 100644 index 000000000000..7e36fe1f2182 --- /dev/null +++ b/firmware/edgeport/down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dgeport/4 Binary Image +//* Generated by HEX2C v1.06 +//* Copyright (C) 1998 Inside Out Networks, All rights reserved. +//* This program is free software; you can redistribute it and/or modify +//* it under the terms of the GNU General Public License as published by +//* the Free Software Foundation; either version 2 of the License, or +//* (at your option) any later version. +//************************************************************** diff --git a/firmware/edgeport/down2.H16 b/firmware/edgeport/down2.H16 new file mode 100644 index 000000000000..2f4b4ff3ab7b --- /dev/null +++ b/firmware/edgeport/down2.H16 @@ -0,0 +1,29 @@ +:000400000002000003F7 +:000200000400FFFB +:00060000000200800245141D +:0003000B000244A507 +:00030013000263ABDA +:0003001B0002001BC5 +:0003002300020023B5 +:0003002B0002002BA5 +:000300330002003395 +:0003003B0002003B85 +:000300430002004375 +:0003004B0002004B65 +:000300530002675FE2 +:0003007B0002007B05 +:00070080007E14000002405253 +: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 +: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 +:00047FC60002000300B2 +: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 +:0000000001FF +//************************************************************** +//* Edgeport/4 Binary Image +//* Generated by HEX2C v1.06 +//* Copyright (C) 1998 Inside Out Networks, All rights reserved. +//* This program is free software; you can redistribute it and/or modify +//* it under the terms of the GNU General Public License as published by +//* the Free Software Foundation; either version 2 of the License, or +//* (at your option) any later version. +//************************************************************** -- cgit v1.2.3 From d12b219a228efe92f0778ed3af21305e65fbb052 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Date: Fri, 4 Jul 2008 23:06:09 +0530 Subject: edgeport-ti: use request_firmware() Firmware blob looks like this... uint8_t MajorVersion uint8_t MinorVersion __le16 BuildNumber uint8_t data[] Signed-off-by: Jaswinder Singh Signed-off-by: David Woodhouse --- drivers/usb/serial/io_fw_down3.h | 847 --------------------------------------- drivers/usb/serial/io_ti.c | 73 ++-- firmware/Makefile | 1 + firmware/WHENCE | 16 + firmware/edgeport/down3.bin.ihex | 815 +++++++++++++++++++++++++++++++++++++ 5 files changed, 879 insertions(+), 873 deletions(-) delete mode 100644 drivers/usb/serial/io_fw_down3.h create mode 100644 firmware/edgeport/down3.bin.ihex diff --git a/drivers/usb/serial/io_fw_down3.h b/drivers/usb/serial/io_fw_down3.h deleted file mode 100644 index 4496b068c50f..000000000000 --- a/drivers/usb/serial/io_fw_down3.h +++ /dev/null @@ -1,847 +0,0 @@ -//************************************************************** -//* Edgeport Binary Image (for TI based products) -//* Generated by TIBin2C v2.00 (watchport) -//* Copyright (C) 2001 Inside Out Networks, All rights reserved. -//************************************************************** - - -static int IMAGE_SIZE = 12938; - -struct EDGE_FIRMWARE_VERSION_INFO -{ - unsigned char MajorVersion; - unsigned char MinorVersion; - unsigned short BuildNumber; -}; - -static struct EDGE_FIRMWARE_VERSION_INFO IMAGE_VERSION_NAME = -{ - 4, 80, 0 // Major, Minor, Build - -}; - -static unsigned char IMAGE_ARRAY_NAME[] = -{ -// struct ImageHdr -// { -// WORD Length; -// BYTE CheckSum; -// }; -0x87, 0x32, -0x9a, - -0x02, 0x27, 0xbf, 0x02, 0x21, 0xb2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x1e, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x01, 0x1a, 0x85, 0x3f, -0x8c, 0x85, 0x40, 0x8a, 0xc0, 0xe0, 0xc0, 0xd0, 0xc0, 0xf0, 0xc0, 0x82, 0xc0, 0x83, 0xc0, 0x00, -0xc0, 0x01, 0xc0, 0x02, 0xc0, 0x03, 0xc0, 0x04, 0xc0, 0x05, 0xc0, 0x06, 0xc0, 0x07, 0xe5, 0x3e, -0x24, 0x08, 0xf8, 0xe6, 0x60, 0x2b, 0xe5, 0x3e, 0x24, 0x10, 0xf8, 0xa6, 0x81, 0xe5, 0x3e, 0x75, -0xf0, 0x21, 0xa4, 0x24, 0x05, 0xf5, 0x82, 0xe4, 0x34, 0xf8, 0xf5, 0x83, 0x78, 0x8c, 0xe5, 0x81, -0x04, 0xc3, 0x98, 0xf9, 0x94, 0x22, 0x40, 0x03, 0x02, 0x11, 0xdc, 0xe6, 0xf0, 0x08, 0xa3, 0xd9, -0xfa, 0x74, 0x08, 0x25, 0x3e, 0xf8, 0x05, 0x3e, 0x08, 0xe6, 0x54, 0x80, 0x70, 0x0c, 0xe5, 0x3e, -0xb4, 0x07, 0xf3, 0x78, 0x08, 0x75, 0x3e, 0x00, 0x80, 0xef, 0xe5, 0x3e, 0x24, 0x10, 0xf8, 0x86, -0x81, 0xe5, 0x3e, 0x75, 0xf0, 0x21, 0xa4, 0x24, 0x05, 0xf5, 0x82, 0xe4, 0x34, 0xf8, 0xf5, 0x83, -0x78, 0x8c, 0xe5, 0x81, 0x04, 0xc3, 0x98, 0xf9, 0xe0, 0xf6, 0x08, 0xa3, 0xd9, 0xfa, 0xd0, 0x07, -0xd0, 0x06, 0xd0, 0x05, 0xd0, 0x04, 0xd0, 0x03, 0xd0, 0x02, 0xd0, 0x01, 0xd0, 0x00, 0xd0, 0x83, -0xd0, 0x82, 0xd0, 0xf0, 0xd0, 0xd0, 0xd0, 0xe0, 0x32, 0x30, 0x01, 0x4d, 0x30, 0xb4, 0x48, 0x10, -0x00, 0x45, 0x90, 0xff, 0x08, 0xe0, 0x54, 0x20, 0xf8, 0x90, 0xff, 0x48, 0xe0, 0x54, 0x20, 0xf9, -0x90, 0xff, 0x10, 0xe0, 0x54, 0x20, 0xfa, 0x90, 0xff, 0x50, 0xe0, 0x54, 0x20, 0xfb, 0x74, 0x00, -0xf5, 0x82, 0x74, 0xf8, 0xf5, 0x83, 0xe0, 0xc8, 0xf0, 0x68, 0x60, 0x02, 0x7e, 0x04, 0xa3, 0xe0, -0xc9, 0xf0, 0x69, 0x60, 0x02, 0x7e, 0x04, 0xa3, 0xe0, 0xca, 0xf0, 0x6a, 0x60, 0x02, 0x7e, 0x04, -0xa3, 0xe0, 0xcb, 0xf0, 0x6b, 0x60, 0x02, 0x7e, 0x04, 0x22, 0xc0, 0xe0, 0xc0, 0xd0, 0xc0, 0xf0, -0xc0, 0x82, 0xc0, 0x83, 0xc0, 0x00, 0xc0, 0x01, 0xc0, 0x02, 0xc0, 0x03, 0xc0, 0x04, 0xc0, 0x05, -0xc0, 0x06, 0xc0, 0x07, 0x74, 0x15, 0xf5, 0x82, 0x74, 0xf9, 0xf5, 0x83, 0xe0, 0x60, 0x23, 0x74, -0x66, 0xf5, 0x82, 0x74, 0xf9, 0xf5, 0x83, 0xe0, 0x14, 0xf0, 0x70, 0x16, 0x74, 0xff, 0xf0, 0x74, -0x1c, 0xf5, 0x82, 0x74, 0xf9, 0xf5, 0x83, 0xe0, 0x60, 0x04, 0x14, 0xf0, 0x70, 0x04, 0xc2, 0x90, -0x80, 0xfc, 0x90, 0xff, 0x93, 0x74, 0x81, 0xf0, 0xe5, 0x81, 0x94, 0xfd, 0x40, 0x03, 0x02, 0x11, -0xdc, 0x85, 0x41, 0x8d, 0x85, 0x42, 0x8b, 0x74, 0xb2, 0xf5, 0x82, 0x74, 0xfa, 0xf5, 0x83, 0xe0, -0xb4, 0x01, 0x1b, 0xc0, 0x82, 0xc0, 0x83, 0x90, 0xff, 0x4a, 0xe0, 0x30, 0xe7, 0x2c, 0x90, 0xff, -0x4e, 0xe0, 0x30, 0xe7, 0x25, 0xd0, 0x83, 0xd0, 0x82, 0x74, 0x02, 0xf0, 0x80, 0x20, 0xb4, 0x02, -0x1d, 0xc0, 0x82, 0xc0, 0x83, 0x90, 0xff, 0x7a, 0xe0, 0x30, 0xe7, 0x05, 0x12, 0x28, 0x4e, 0x80, -0x09, 0xd0, 0x83, 0xd0, 0x82, 0x74, 0x03, 0xf0, 0x80, 0x04, 0xd0, 0x83, 0xd0, 0x82, 0xa3, 0xe0, -0xb4, 0x01, 0x1b, 0xc0, 0x82, 0xc0, 0x83, 0x90, 0xff, 0x52, 0xe0, 0x30, 0xe7, 0x2c, 0x90, 0xff, -0x56, 0xe0, 0x30, 0xe7, 0x25, 0xd0, 0x83, 0xd0, 0x82, 0x74, 0x02, 0xf0, 0x80, 0x25, 0xb4, 0x02, -0x22, 0xc0, 0x82, 0xc0, 0x83, 0x90, 0xff, 0x7a, 0xe0, 0x30, 0xe7, 0x05, 0x12, 0x28, 0x4e, 0x80, -0x09, 0xd0, 0x83, 0xd0, 0x82, 0x74, 0x03, 0xf0, 0x80, 0x09, 0xd0, 0x83, 0xd0, 0x82, 0x80, 0x03, -0x02, 0x02, 0x90, 0x74, 0x16, 0xf5, 0x82, 0x74, 0xf9, 0xf5, 0x83, 0xe0, 0x20, 0x04, 0xf1, 0x20, -0x02, 0x03, 0x30, 0x01, 0xeb, 0x74, 0x19, 0xf5, 0x82, 0x74, 0xf9, 0xf5, 0x83, 0xe0, 0x14, 0xfc, -0xf0, 0xa3, 0xe0, 0xfd, 0xa3, 0xe0, 0xfe, 0x64, 0x04, 0x70, 0x0f, 0xec, 0x70, 0x62, 0x7e, 0x01, -0x12, 0x00, 0xc9, 0x7c, 0x0a, 0x7d, 0xfa, 0x02, 0x02, 0x61, 0x12, 0x00, 0xc9, 0xee, 0x64, 0x04, -0x60, 0x1d, 0xec, 0x70, 0x4b, 0x7c, 0x0a, 0xed, 0x14, 0xfd, 0x70, 0x15, 0xee, 0x64, 0x02, 0x60, -0x07, 0x7e, 0x02, 0x7d, 0x32, 0x02, 0x02, 0x61, 0x7e, 0x01, 0x7d, 0xfa, 0x02, 0x02, 0x61, 0x7c, -0x0a, 0x74, 0x19, 0xf5, 0x82, 0x74, 0xf9, 0xf5, 0x83, 0xec, 0xf0, 0xa3, 0xed, 0xf0, 0xa3, 0xee, -0xf0, 0x14, 0x60, 0x18, 0x20, 0xe1, 0x0f, 0x20, 0x01, 0x06, 0xd2, 0xb1, 0xc2, 0xb0, 0x80, 0x10, -0xc2, 0xb1, 0xd2, 0xb0, 0x80, 0x0a, 0xc2, 0xb1, 0xc2, 0xb0, 0x80, 0x04, 0xd2, 0xb0, 0xd2, 0xb1, -0x78, 0x19, 0x79, 0x09, 0x7a, 0x07, 0xe7, 0x70, 0x04, 0xa6, 0x00, 0x80, 0x0b, 0xe6, 0x60, 0x08, -0x16, 0xe6, 0x70, 0x04, 0xe7, 0x44, 0x80, 0xf7, 0x08, 0x09, 0xda, 0xea, 0xe5, 0x3d, 0x60, 0x13, -0x14, 0xf5, 0x3d, 0x70, 0x0e, 0xe5, 0x3e, 0x24, 0x08, 0xf8, 0x76, 0x00, 0x12, 0x11, 0x57, 0xd2, -0x8c, 0xd2, 0x8d, 0xd0, 0x07, 0xd0, 0x06, 0xd0, 0x05, 0xd0, 0x04, 0xd0, 0x03, 0xd0, 0x02, 0xd0, -0x01, 0xd0, 0x00, 0xd0, 0x83, 0xd0, 0x82, 0xd0, 0xf0, 0xd0, 0xd0, 0xd0, 0xe0, 0x32, 0x90, 0xff, -0x04, 0xe0, 0x90, 0xfa, 0xb9, 0xf0, 0x90, 0xff, 0x06, 0xe0, 0xfc, 0xa3, 0xe0, 0xfa, 0xec, 0xff, -0xea, 0xfe, 0xef, 0xc3, 0x94, 0x08, 0xee, 0x94, 0x01, 0x50, 0x02, 0x80, 0x04, 0x7e, 0x01, 0x7f, -0x08, 0x8e, 0x3b, 0x8f, 0x3c, 0x90, 0xff, 0x02, 0xe0, 0xfc, 0xa3, 0xe0, 0xfa, 0xec, 0xff, 0xea, -0x90, 0xfa, 0xbd, 0xf0, 0xef, 0xa3, 0xf0, 0x12, 0x1c, 0xe0, 0xe4, 0xf5, 0x4d, 0xe5, 0x4d, 0xc3, -0x94, 0x02, 0x50, 0x0f, 0x12, 0x1c, 0xc1, 0xe4, 0x12, 0x1a, 0xe8, 0x05, 0x4d, 0x04, 0x12, 0x1c, -0xb2, 0x80, 0xea, 0x12, 0x1c, 0xe0, 0x90, 0xff, 0x00, 0xe0, 0xff, 0x54, 0x60, 0x24, 0xc0, 0x70, -0x03, 0x02, 0x08, 0xf3, 0x24, 0x40, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xb9, 0xe0, 0xfe, -0x54, 0x0f, 0xf5, 0x4d, 0xee, 0x30, 0xe7, 0x03, 0xd3, 0x80, 0x01, 0xc3, 0x92, 0x0a, 0x90, 0xff, -0x01, 0xe0, 0x12, 0x1b, 0xfc, 0x03, 0x84, 0x00, 0x04, 0x57, 0x01, 0x05, 0x6a, 0x03, 0x06, 0x31, -0x05, 0x06, 0x73, 0x06, 0x07, 0xd5, 0x08, 0x08, 0x1d, 0x09, 0x08, 0x79, 0x0a, 0x08, 0xb9, 0x0b, -0x00, 0x00, 0x0f, 0x6e, 0xe5, 0x35, 0x20, 0xe7, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xbd, 0xe0, -0x70, 0x02, 0xa3, 0xe0, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x3c, 0x64, 0x02, 0x45, 0x3b, 0x60, -0x03, 0x02, 0x0f, 0x6e, 0xef, 0x54, 0x1f, 0x14, 0x60, 0x2b, 0x14, 0x60, 0x47, 0x24, 0x02, 0x60, -0x03, 0x02, 0x0f, 0x6e, 0xee, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x12, 0x1c, 0xc1, 0x74, 0x01, 0x12, -0x1a, 0xe8, 0x78, 0x67, 0xe6, 0x30, 0xe0, 0x08, 0x12, 0x1c, 0xc1, 0x74, 0x02, 0x12, 0x1a, 0xe8, -0x7f, 0x02, 0x02, 0x32, 0x6e, 0xe5, 0x35, 0x20, 0xe1, 0x09, 0x90, 0xfa, 0xb9, 0xe0, 0x60, 0x03, -0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xb9, 0xe0, 0xd3, 0x94, 0x01, 0x40, 0x03, 0x02, 0x0f, 0x6e, 0x7f, -0x02, 0x02, 0x32, 0x6e, 0xe5, 0x35, 0x20, 0xe1, 0x0e, 0x90, 0xfa, 0xb9, 0xe0, 0xff, 0x60, 0x07, -0x64, 0x80, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x12, 0x0f, 0xfa, 0x40, 0x03, 0x02, 0x0f, 0x6e, 0xe5, -0x4d, 0x70, 0x19, 0x30, 0x0a, 0x0b, 0x90, 0xff, 0x80, 0x12, 0x1c, 0xbe, 0x12, 0x1a, 0xe8, 0x80, -0x24, 0x90, 0xff, 0x82, 0x12, 0x1c, 0xbe, 0x12, 0x1a, 0xe8, 0x80, 0x19, 0x15, 0x4d, 0x30, 0x0a, -0x0b, 0x12, 0x1d, 0x55, 0x12, 0x1c, 0xbc, 0x12, 0x1a, 0xe8, 0x80, 0x09, 0x12, 0x1d, 0x63, 0x12, -0x1c, 0xbc, 0x12, 0x1a, 0xe8, 0x12, 0x1c, 0xc1, 0x12, 0x1a, 0xa2, 0x60, 0x05, 0x74, 0x01, 0x12, -0x1a, 0xe8, 0x7f, 0x02, 0x02, 0x32, 0x6e, 0xe5, 0x35, 0x30, 0xe7, 0x03, 0x02, 0x0f, 0x6e, 0xe5, -0x3c, 0x45, 0x3b, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x12, 0x1d, 0x79, 0x14, 0x60, 0x2d, 0x14, 0x60, -0x59, 0x24, 0x02, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xbd, 0xe0, 0x70, 0x04, 0xa3, 0xe0, -0x64, 0x01, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xb9, 0xe0, 0x60, 0x03, 0x02, 0x0f, 0x6e, -0x78, 0x67, 0xe6, 0x54, 0xfe, 0xf6, 0xe4, 0xff, 0x02, 0x32, 0x6e, 0xe5, 0x35, 0x20, 0xe1, 0x06, -0x20, 0xe0, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x35, 0x30, 0xe0, 0x09, 0x90, 0xfa, 0xb9, 0xe0, 0x60, -0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x35, 0x30, 0xe1, 0x0c, 0x90, 0xfa, 0xb9, 0xe0, 0xd3, 0x94, 0x01, -0x40, 0x03, 0x02, 0x0f, 0x6e, 0xe4, 0xff, 0x02, 0x32, 0x6e, 0x90, 0xfa, 0xbd, 0xe0, 0x70, 0x02, -0xa3, 0xe0, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x12, 0x0f, 0xfa, 0x40, 0x03, 0x02, 0x0f, 0x6e, 0xe5, -0x35, 0x20, 0xe1, 0x06, 0x20, 0xe0, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x35, 0x30, 0xe0, 0x07, 0xe5, -0x4d, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x4d, 0x70, 0x0f, 0x90, 0xff, 0x82, 0xe0, 0x54, 0xf7, -0xf0, 0x90, 0xff, 0x80, 0xe0, 0x54, 0xf7, 0xf0, 0x22, 0xe5, 0x4d, 0x24, 0xfe, 0x60, 0x20, 0x24, -0xfb, 0x60, 0x34, 0x24, 0x06, 0x70, 0x35, 0x30, 0x0a, 0x0c, 0xa2, 0x0a, 0xe4, 0x33, 0xfd, 0x7f, -0x03, 0x12, 0x2e, 0x79, 0x80, 0x26, 0xe4, 0xfd, 0x7f, 0x03, 0x12, 0x2e, 0x79, 0x80, 0x1d, 0x30, -0x0a, 0x0c, 0xa2, 0x0a, 0xe4, 0x33, 0xfd, 0x7f, 0x04, 0x12, 0x2e, 0x79, 0x80, 0x0e, 0xe4, 0xfd, -0x7f, 0x04, 0x12, 0x2e, 0x79, 0x80, 0x05, 0x7f, 0x87, 0x12, 0x31, 0xef, 0x15, 0x4d, 0x30, 0x0a, -0x0b, 0x12, 0x1d, 0x55, 0xf5, 0x83, 0xe0, 0x54, 0xf7, 0xf0, 0x80, 0x09, 0x12, 0x1d, 0x63, 0xf5, -0x83, 0xe0, 0x54, 0xf7, 0xf0, 0xe4, 0xff, 0x02, 0x32, 0x6e, 0xe5, 0x35, 0x30, 0xe7, 0x03, 0x02, -0x0f, 0x6e, 0xe5, 0x3c, 0x45, 0x3b, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x12, 0x1d, 0x79, 0x14, 0x60, -0x2d, 0x14, 0x60, 0x55, 0x24, 0x02, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xbd, 0xe0, 0x70, -0x04, 0xa3, 0xe0, 0x64, 0x01, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xb9, 0xe0, 0x60, 0x03, -0x02, 0x0f, 0x6e, 0x78, 0x67, 0xe6, 0x44, 0x01, 0xf6, 0xe4, 0xff, 0x02, 0x32, 0x6e, 0xe5, 0x35, -0x20, 0xe1, 0x06, 0x20, 0xe0, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x35, 0x30, 0xe0, 0x07, 0xe5, 0x4d, -0x60, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x35, 0x30, 0xe1, 0x0a, 0xe5, 0x4d, 0xd3, 0x94, 0x01, 0x40, -0x03, 0x02, 0x0f, 0x6e, 0xe4, 0xff, 0x02, 0x32, 0x6e, 0x90, 0xfa, 0xbd, 0xe0, 0x70, 0x02, 0xa3, -0xe0, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xb9, 0xe0, 0xff, 0x12, 0x32, 0x3f, 0x40, 0x03, -0x02, 0x0f, 0x6e, 0xe5, 0x35, 0x20, 0xe1, 0x06, 0x20, 0xe0, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x4d, -0x70, 0x09, 0x30, 0x0a, 0x03, 0x02, 0x1e, 0x14, 0x02, 0x1d, 0xdf, 0xe5, 0x35, 0x20, 0xe1, 0x03, -0x02, 0x0f, 0x6e, 0x15, 0x4d, 0x30, 0x0a, 0x0b, 0x12, 0x1d, 0x55, 0xf5, 0x83, 0xe0, 0x44, 0x08, -0xf0, 0x80, 0x09, 0x12, 0x1d, 0x63, 0xf5, 0x83, 0xe0, 0x44, 0x08, 0xf0, 0xe4, 0xff, 0x02, 0x32, -0x6e, 0xe5, 0x35, 0x30, 0xe7, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x3c, 0x45, 0x3b, 0x60, 0x03, 0x02, -0x0f, 0x6e, 0x90, 0xfa, 0xb9, 0xe0, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x12, 0x1d, 0x79, 0x60, 0x03, -0x02, 0x0f, 0x6e, 0xe5, 0x35, 0x30, 0xe1, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xbe, 0xe0, 0x90, -0xff, 0xff, 0xf0, 0xe0, 0x60, 0x05, 0x43, 0x35, 0x01, 0x80, 0x03, 0x53, 0x35, 0xfe, 0xe4, 0xff, -0x02, 0x32, 0x6e, 0xe5, 0x35, 0x20, 0xe7, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x3c, 0x45, 0x3b, 0x70, -0x03, 0x02, 0x0f, 0x6e, 0x12, 0x1d, 0x79, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xbd, 0xe0, -0xfc, 0xa3, 0xe0, 0xfd, 0xec, 0x24, 0xfe, 0x60, 0x3a, 0x14, 0x60, 0x75, 0x24, 0x02, 0x60, 0x03, -0x02, 0x0f, 0x6e, 0xed, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x12, 0x1c, 0xe0, 0x12, 0x1e, 0x0d, 0x7d, -0x03, 0x12, 0x0f, 0xb5, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x12, 0x0f, 0x72, 0x90, 0xfa, 0xb6, 0xe0, -0xfd, 0xa3, 0x12, 0x1d, 0x2b, 0x12, 0x0f, 0xd1, 0x50, 0x02, 0x80, 0x04, 0xae, 0x3b, 0xaf, 0x3c, -0x02, 0x10, 0x02, 0x12, 0x1c, 0xe0, 0x90, 0xf9, 0x16, 0xe0, 0x30, 0xe4, 0x0d, 0x12, 0x1e, 0x0d, -0x7d, 0x14, 0x12, 0x0f, 0xb5, 0x60, 0x10, 0x02, 0x0f, 0x6e, 0x12, 0x1e, 0x0d, 0x7d, 0x04, 0x12, -0x10, 0x09, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x12, 0x0f, 0x72, 0x90, 0xfa, 0xb6, 0xe0, 0xfd, 0xa3, -0x12, 0x1d, 0x2b, 0x12, 0x0f, 0xd1, 0x50, 0x02, 0x80, 0x04, 0xae, 0x3b, 0xaf, 0x3c, 0x02, 0x10, -0x02, 0x12, 0x1e, 0x0d, 0x7d, 0x05, 0x12, 0x10, 0x09, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x7b, 0x01, -0x7a, 0xfa, 0x79, 0xb6, 0x12, 0x1d, 0x28, 0x7d, 0x01, 0x12, 0x26, 0x98, 0x90, 0xfa, 0xb7, 0xe4, -0x75, 0xf0, 0x03, 0x12, 0x1b, 0x1c, 0x90, 0xfa, 0xbe, 0xe0, 0x90, 0xfa, 0xb5, 0xf0, 0xe4, 0xf5, -0x4c, 0x90, 0xfa, 0xb5, 0xe0, 0xff, 0xe5, 0x4c, 0xc3, 0x9f, 0x50, 0x24, 0x12, 0x1d, 0x22, 0x12, -0x10, 0x14, 0xff, 0xfd, 0x90, 0xfa, 0xb7, 0xe4, 0x8d, 0xf0, 0x12, 0x1b, 0x1c, 0x90, 0xfa, 0xb6, -0xe0, 0xc3, 0x9f, 0xf0, 0xd3, 0x94, 0x00, 0x50, 0x03, 0x02, 0x0f, 0x6e, 0x05, 0x4c, 0x80, 0xd1, -0x12, 0x1d, 0x22, 0x12, 0x10, 0x14, 0x24, 0xfe, 0xff, 0x90, 0xfa, 0xb6, 0xf0, 0xfd, 0xa3, 0xe4, -0x75, 0xf0, 0x02, 0x12, 0x1b, 0x1c, 0x7a, 0xf9, 0x79, 0x72, 0x7b, 0x01, 0x8b, 0x36, 0x8a, 0x37, -0x89, 0x38, 0xe9, 0x24, 0x02, 0xf9, 0xe4, 0x3a, 0xfa, 0x12, 0x1d, 0x28, 0x12, 0x26, 0x98, 0x8f, -0x4c, 0x05, 0x4c, 0x05, 0x4c, 0x12, 0x1c, 0xc1, 0xe5, 0x4c, 0x12, 0x1a, 0xe8, 0x12, 0x1c, 0xc1, -0x90, 0x00, 0x01, 0x74, 0x03, 0x12, 0x1a, 0xfa, 0xaf, 0x4c, 0x7e, 0x00, 0xc3, 0xef, 0x95, 0x3c, -0xee, 0x95, 0x3b, 0x50, 0x02, 0x80, 0x04, 0xae, 0x3b, 0xaf, 0x3c, 0x8e, 0x39, 0x8f, 0x3a, 0x02, -0x2c, 0xd8, 0x02, 0x0f, 0x6e, 0xe5, 0x35, 0x20, 0xe7, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x3c, 0x64, -0x01, 0x45, 0x3b, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xb9, 0xe0, 0x60, 0x03, 0x02, 0x0f, -0x6e, 0x90, 0xfa, 0xbd, 0xe0, 0x70, 0x02, 0xa3, 0xe0, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x12, 0x1d, -0x79, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x35, 0x20, 0xe0, 0x06, 0x20, 0xe1, 0x03, 0x02, 0x0f, -0x6e, 0x75, 0x36, 0x00, 0x75, 0x37, 0x00, 0x75, 0x38, 0x32, 0x02, 0x0f, 0xf1, 0xe5, 0x35, 0x30, -0xe7, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x3c, 0x45, 0x3b, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, -0xb9, 0xe0, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0xd3, 0x90, 0xfa, 0xbe, 0xe0, 0x94, 0x01, 0x90, 0xfa, -0xbd, 0xe0, 0x94, 0x00, 0x40, 0x03, 0x02, 0x0f, 0x6e, 0x12, 0x1d, 0x79, 0x60, 0x03, 0x02, 0x0f, -0x6e, 0xe5, 0x35, 0x20, 0xe0, 0x06, 0x20, 0xe1, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xbe, 0xe0, -0xf5, 0x32, 0xe5, 0x32, 0x70, 0x08, 0x43, 0x35, 0x01, 0x53, 0x35, 0xfd, 0x80, 0x06, 0x53, 0x35, -0xfe, 0x43, 0x35, 0x02, 0xe4, 0xff, 0x02, 0x32, 0x6e, 0xe5, 0x35, 0x20, 0xe7, 0x03, 0x02, 0x0f, -0x6e, 0xe5, 0x3c, 0x64, 0x01, 0x45, 0x3b, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xb9, 0xe0, -0x60, 0x03, 0x02, 0x0f, 0x6e, 0x90, 0xfa, 0xbd, 0xe0, 0x70, 0x02, 0xa3, 0xe0, 0x60, 0x03, 0x02, -0x0f, 0x6e, 0x12, 0x1d, 0x79, 0x64, 0x01, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x35, 0x20, 0xe1, -0x03, 0x02, 0x0f, 0x6e, 0x7f, 0x01, 0x02, 0x32, 0x6e, 0xe5, 0x35, 0x30, 0xe7, 0x03, 0x02, 0x0f, -0x6e, 0xe5, 0x3c, 0x45, 0x3b, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0xd3, 0x90, 0xfa, 0xbe, 0xe0, 0x94, -0x00, 0x90, 0xfa, 0xbd, 0xe0, 0x94, 0x00, 0x40, 0x03, 0x02, 0x0f, 0x6e, 0x12, 0x1d, 0x79, 0x64, -0x01, 0x60, 0x03, 0x02, 0x0f, 0x6e, 0xe5, 0x35, 0x20, 0xe1, 0x03, 0x02, 0x0f, 0x6e, 0xe4, 0xff, -0x02, 0x32, 0x6e, 0x90, 0xff, 0x01, 0x12, 0x1e, 0x24, 0xef, 0x12, 0x1a, 0xe8, 0x90, 0xfa, 0xb9, -0x12, 0x1e, 0x24, 0x90, 0x00, 0x01, 0xef, 0x12, 0x1a, 0xfa, 0x90, 0x00, 0x02, 0xe4, 0x12, 0x1a, -0xfa, 0x74, 0x03, 0x12, 0x1c, 0xb2, 0x90, 0xfa, 0xbd, 0xe0, 0xff, 0xa3, 0xe0, 0x85, 0x38, 0x82, -0x85, 0x37, 0x83, 0xcf, 0xf0, 0xa3, 0xef, 0xf0, 0x90, 0xff, 0x01, 0xe0, 0x12, 0x1b, 0xfc, 0x09, -0x7b, 0x02, 0x09, 0x9d, 0x04, 0x09, 0xbf, 0x05, 0x09, 0xeb, 0x06, 0x0a, 0x09, 0x07, 0x0a, 0x27, -0x08, 0x0a, 0x45, 0x09, 0x0a, 0x63, 0x0b, 0x0b, 0x18, 0x80, 0x0d, 0xb7, 0x81, 0x0d, 0xe8, 0x82, -0x0b, 0x5f, 0x83, 0x0b, 0xa8, 0x84, 0x0b, 0xc7, 0x85, 0x0c, 0x0c, 0x86, 0x0c, 0x57, 0x87, 0x0c, -0xe8, 0x88, 0x0d, 0x73, 0x89, 0x0a, 0x81, 0x92, 0x0a, 0x81, 0x93, 0x0d, 0xa0, 0xb0, 0x0e, 0x9b, -0xc0, 0x0e, 0xc7, 0xc1, 0x0e, 0xd8, 0xc2, 0x00, 0x00, 0x0f, 0x5d, 0xe5, 0x35, 0x20, 0xe7, 0x05, -0x7f, 0x05, 0x02, 0x31, 0xa9, 0x12, 0x1d, 0x71, 0x60, 0x03, 0x04, 0x70, 0x09, 0xef, 0xfd, 0x7c, -0x00, 0x7f, 0x07, 0x02, 0x11, 0x5e, 0xe4, 0xfd, 0x7f, 0x07, 0x02, 0x2f, 0xb4, 0xe5, 0x35, 0x20, -0xe7, 0x05, 0x7f, 0x05, 0x02, 0x31, 0xa9, 0x12, 0x1d, 0x71, 0x60, 0x03, 0x04, 0x70, 0x09, 0xef, -0xfd, 0x7c, 0x00, 0x7f, 0x0c, 0x02, 0x11, 0x5e, 0xe4, 0xfd, 0x7f, 0x07, 0x02, 0x2f, 0xb4, 0xe5, -0x35, 0x30, 0xe7, 0x03, 0x02, 0x0f, 0x71, 0x12, 0x1e, 0x42, 0x50, 0x06, 0xe5, 0x3c, 0x45, 0x3b, -0x70, 0x05, 0x7f, 0x02, 0x02, 0x31, 0xa9, 0x90, 0xfa, 0xb9, 0xe0, 0x24, 0xfe, 0x24, 0xfd, 0x50, -0x02, 0x80, 0x03, 0x02, 0x32, 0x2c, 0x7f, 0x07, 0x02, 0x31, 0xa9, 0xe5, 0x35, 0x30, 0xe7, 0x03, -0x02, 0x0f, 0x71, 0x12, 0x1d, 0x71, 0x60, 0x03, 0x04, 0x70, 0x09, 0xef, 0xfd, 0x7c, 0x00, 0x7f, -0x08, 0x02, 0x11, 0x5e, 0x7f, 0x07, 0x02, 0x31, 0xa9, 0xe5, 0x35, 0x30, 0xe7, 0x03, 0x02, 0x0f, -0x71, 0x12, 0x1d, 0x71, 0x60, 0x03, 0x04, 0x70, 0x09, 0xef, 0xfd, 0x7c, 0x00, 0x7f, 0x09, 0x02, -0x11, 0x5e, 0x7f, 0x07, 0x02, 0x31, 0xa9, 0xe5, 0x35, 0x30, 0xe7, 0x03, 0x02, 0x0f, 0x71, 0x12, -0x1d, 0x71, 0x60, 0x03, 0x04, 0x70, 0x09, 0xef, 0xfd, 0x7c, 0x00, 0x7f, 0x0a, 0x02, 0x11, 0x5e, -0x7f, 0x07, 0x02, 0x31, 0xa9, 0xe5, 0x35, 0x30, 0xe7, 0x03, 0x02, 0x0f, 0x71, 0x12, 0x1d, 0x71, -0x60, 0x03, 0x04, 0x70, 0x09, 0xef, 0xfd, 0x7c, 0x00, 0x7f, 0x0b, 0x02, 0x11, 0x5e, 0x7f, 0x07, -0x02, 0x31, 0xa9, 0xe5, 0x35, 0x30, 0xe7, 0x03, 0x02, 0x0f, 0x71, 0x12, 0x1d, 0x71, 0x60, 0x03, -0x04, 0x70, 0x09, 0xef, 0xfd, 0x7c, 0x00, 0x7f, 0x0e, 0x02, 0x11, 0x5e, 0x7f, 0x07, 0x02, 0x31, -0xa9, 0xe5, 0x35, 0x30, 0xe7, 0x56, 0x12, 0x1d, 0x79, 0x70, 0x4a, 0x90, 0xff, 0x02, 0xe0, 0xf5, -0x4c, 0xe5, 0x4c, 0xb4, 0x82, 0x05, 0x75, 0x4c, 0x61, 0x80, 0x12, 0xe5, 0x4c, 0xb4, 0x83, 0x05, -0x75, 0x4c, 0x62, 0x80, 0x08, 0xe5, 0x4c, 0xc4, 0x54, 0xf0, 0x04, 0xf5, 0x4c, 0x12, 0x1c, 0x22, -0x12, 0x1e, 0x3b, 0x12, 0x25, 0xfa, 0x12, 0x1d, 0x89, 0x12, 0x1a, 0xbb, 0x60, 0x05, 0x12, 0x32, -0x7a, 0x80, 0x06, 0x85, 0x33, 0x39, 0x85, 0x34, 0x3a, 0x75, 0x36, 0x01, 0x75, 0x37, 0xf9, 0x75, -0x38, 0x75, 0x02, 0x2c, 0xd8, 0xe4, 0xfd, 0x7f, 0x05, 0x02, 0x2f, 0xb4, 0x12, 0x1d, 0x79, 0x60, -0x05, 0x7f, 0x05, 0x02, 0x31, 0xa9, 0x12, 0x1e, 0x42, 0x40, 0x05, 0x7f, 0x03, 0x02, 0x31, 0xa9, -0x90, 0xff, 0x02, 0xe0, 0xf5, 0x4c, 0xe5, 0x4c, 0xb4, 0x82, 0x05, 0x75, 0x4c, 0x61, 0x80, 0x12, -0xe5, 0x4c, 0xb4, 0x83, 0x05, 0x75, 0x4c, 0x62, 0x80, 0x08, 0xe5, 0x4c, 0xc4, 0x54, 0xf0, 0x04, -0xf5, 0x4c, 0x12, 0x1c, 0x22, 0x02, 0x32, 0x2c, 0x12, 0x1e, 0x4c, 0x12, 0x2a, 0xc7, 0x12, 0x1d, -0x33, 0xe0, 0x54, 0x7f, 0xf0, 0x00, 0x00, 0x00, 0xe0, 0x90, 0xfa, 0xba, 0xf0, 0x78, 0x68, 0x12, -0x1b, 0xd8, 0x90, 0x00, 0x02, 0x12, 0x1a, 0xbb, 0x30, 0xe7, 0xf2, 0x90, 0x00, 0x02, 0xe4, 0x12, -0x1a, 0xfa, 0x90, 0xfa, 0xba, 0xe0, 0x44, 0x80, 0xff, 0xf0, 0x78, 0x7c, 0xe6, 0xfc, 0x08, 0xe6, -0x8c, 0x83, 0x12, 0x1d, 0x3b, 0xef, 0xf0, 0x12, 0x32, 0x84, 0xe4, 0xff, 0x02, 0x31, 0xa9, 0x90, -0xfa, 0xb9, 0xe0, 0x64, 0x01, 0x70, 0x1f, 0x90, 0xfa, 0xbd, 0xe0, 0xff, 0x7e, 0x00, 0x70, 0x06, -0xa3, 0xe0, 0xf5, 0x90, 0x80, 0x2d, 0xc2, 0xaf, 0xef, 0xf4, 0x52, 0x90, 0x90, 0xfa, 0xbe, 0xe0, -0x42, 0x90, 0xd2, 0xaf, 0x80, 0x1d, 0x90, 0xfa, 0xbd, 0xe0, 0xff, 0x7e, 0x00, 0x70, 0x06, 0xa3, -0xe0, 0xf5, 0xb0, 0x80, 0x0e, 0xc2, 0xaf, 0xef, 0xf4, 0x52, 0xb0, 0x90, 0xfa, 0xbe, 0xe0, 0x42, -0xb0, 0xd2, 0xaf, 0xe4, 0xff, 0x02, 0x31, 0xa9, 0x12, 0x1c, 0xe0, 0x90, 0xfa, 0xb9, 0xe0, 0xb4, -0x01, 0x0a, 0x12, 0x1c, 0xc1, 0xe5, 0x90, 0x12, 0x1a, 0xe8, 0x80, 0x08, 0x12, 0x1c, 0xc1, 0xe5, -0xb0, 0x12, 0x1a, 0xe8, 0x02, 0x0f, 0xf1, 0x90, 0xfa, 0xb9, 0xe0, 0xff, 0x24, 0x13, 0x12, 0x1c, -0xf1, 0x20, 0xe1, 0x33, 0x12, 0x1d, 0x80, 0xef, 0x24, 0xfc, 0x60, 0x18, 0x04, 0x70, 0x28, 0x90, -0xfa, 0xba, 0xe0, 0x60, 0x09, 0x90, 0xff, 0xa4, 0xe0, 0x44, 0x10, 0xf0, 0x80, 0x19, 0x12, 0x1e, -0x56, 0xf0, 0x80, 0x13, 0x90, 0xfa, 0xba, 0xe0, 0x60, 0x09, 0x90, 0xff, 0xb4, 0xe0, 0x44, 0x10, -0xf0, 0x80, 0x04, 0x12, 0x1e, 0x5d, 0xf0, 0xe4, 0xff, 0x02, 0x31, 0xa9, 0x90, 0xfa, 0xb9, 0xe0, -0xff, 0x24, 0x13, 0x12, 0x1c, 0xf1, 0x20, 0xe1, 0x39, 0x12, 0x1d, 0x80, 0xef, 0x24, 0xfc, 0x60, -0x1b, 0x04, 0x70, 0x2e, 0x90, 0xfa, 0xba, 0xe0, 0x60, 0x09, 0x90, 0xff, 0xa4, 0xe0, 0x44, 0x20, -0xf0, 0x80, 0x1f, 0x90, 0xff, 0xa4, 0xe0, 0x54, 0xdf, 0xf0, 0x80, 0x16, 0x90, 0xfa, 0xba, 0xe0, -0x60, 0x09, 0x90, 0xff, 0xb4, 0xe0, 0x44, 0x20, 0xf0, 0x80, 0x07, 0x90, 0xff, 0xb4, 0xe0, 0x54, -0xdf, 0xf0, 0xe4, 0xff, 0x02, 0x31, 0xa9, 0x12, 0x1d, 0x80, 0x12, 0x1d, 0x71, 0x60, 0x4d, 0x04, -0x60, 0x03, 0x02, 0x0c, 0xe3, 0x90, 0xfa, 0xba, 0xe0, 0x60, 0x0f, 0x90, 0xff, 0xa4, 0x12, 0x1c, -0xea, 0x30, 0xe1, 0x6f, 0x12, 0x1e, 0x2c, 0x02, 0x0c, 0xe3, 0x90, 0xff, 0xa4, 0xe0, 0x54, 0xfb, -0x12, 0x1c, 0xed, 0xfe, 0x30, 0xe1, 0x5c, 0x30, 0xe2, 0x11, 0x30, 0xb4, 0x05, 0x12, 0x1e, 0x2c, -0x80, 0x51, 0x90, 0xff, 0xa4, 0xe0, 0x54, 0xfd, 0xf0, 0x80, 0x48, 0x30, 0x95, 0x05, 0x12, 0x1e, -0x2c, 0x80, 0x40, 0x90, 0xff, 0xa4, 0xe0, 0x54, 0xfd, 0xf0, 0x80, 0x37, 0x90, 0xfa, 0xba, 0xe0, -0x60, 0x12, 0x90, 0xff, 0xb4, 0x12, 0x1c, 0xea, 0x30, 0xe1, 0x28, 0x90, 0xff, 0xb4, 0xe0, 0x44, -0x02, 0xf0, 0x80, 0x1f, 0x90, 0xff, 0xb4, 0xe0, 0x54, 0xfb, 0x12, 0x1c, 0xed, 0x30, 0xe1, 0x13, -0x30, 0x93, 0x09, 0x90, 0xff, 0xb4, 0xe0, 0x44, 0x02, 0xf0, 0x80, 0x07, 0x90, 0xff, 0xb4, 0xe0, -0x54, 0xfd, 0xf0, 0xe4, 0xff, 0x02, 0x31, 0xa9, 0x12, 0x1d, 0x80, 0x90, 0xfa, 0xb9, 0xe0, 0x24, -0xfc, 0x60, 0x40, 0x04, 0x70, 0x78, 0x90, 0xfa, 0xba, 0xe0, 0x60, 0x1d, 0x90, 0xff, 0xa2, 0xe0, -0x44, 0x40, 0xf0, 0xa3, 0xe0, 0xff, 0x30, 0xe7, 0x65, 0xd2, 0x03, 0xa3, 0xe0, 0x54, 0xdf, 0xf0, -0x90, 0xff, 0xa3, 0xef, 0x54, 0x7f, 0xf0, 0x80, 0x55, 0x30, 0x03, 0x0e, 0x90, 0xff, 0xa3, 0xe0, -0x44, 0x80, 0xf0, 0xc2, 0x03, 0xa3, 0xe0, 0x44, 0x20, 0xf0, 0x90, 0xff, 0xa2, 0xe0, 0x54, 0xbf, -0xf0, 0x80, 0x3b, 0x90, 0xfa, 0xba, 0xe0, 0x60, 0x1d, 0x90, 0xff, 0xb2, 0xe0, 0x44, 0x40, 0xf0, -0xa3, 0xe0, 0xff, 0x30, 0xe7, 0x28, 0xd2, 0x04, 0xa3, 0xe0, 0x54, 0xdf, 0xf0, 0x90, 0xff, 0xb3, -0xef, 0x54, 0x7f, 0xf0, 0x80, 0x18, 0x30, 0x04, 0x0e, 0x90, 0xff, 0xb3, 0xe0, 0x44, 0x80, 0xf0, -0xc2, 0x04, 0xa3, 0xe0, 0x44, 0x20, 0xf0, 0x90, 0xff, 0xb2, 0xe0, 0x54, 0xbf, 0xf0, 0xe4, 0xff, -0x02, 0x31, 0xa9, 0x12, 0x1c, 0xe0, 0x90, 0xfa, 0xb9, 0xe0, 0x24, 0xfc, 0x60, 0x0f, 0x04, 0x70, -0x16, 0x90, 0xff, 0xa6, 0xe0, 0x12, 0x1c, 0xc1, 0x12, 0x1a, 0xe8, 0x80, 0x0a, 0x90, 0xff, 0xb6, -0xe0, 0x12, 0x1c, 0xc1, 0x12, 0x1a, 0xe8, 0x75, 0x39, 0x00, 0x75, 0x3a, 0x01, 0x02, 0x2c, 0xd8, -0x90, 0xf9, 0x15, 0x74, 0x01, 0xf0, 0x90, 0xf9, 0x1c, 0x74, 0x19, 0xf0, 0x90, 0xf9, 0x66, 0x74, -0xff, 0xf0, 0xe4, 0xff, 0x02, 0x31, 0xa9, 0xe4, 0xff, 0x12, 0x31, 0xa9, 0x12, 0x1d, 0xe7, 0x7f, -0x03, 0x12, 0x12, 0x61, 0x90, 0xf9, 0x16, 0xe0, 0x30, 0xe4, 0x08, 0x90, 0xff, 0x93, 0x74, 0x80, -0xf0, 0x80, 0x10, 0x90, 0xff, 0xfc, 0xe0, 0x54, 0x7f, 0xf0, 0x7f, 0xff, 0x7e, 0x00, 0x12, 0x30, -0xd3, 0xc2, 0x90, 0xc2, 0xaf, 0x00, 0x80, 0xfd, 0xe4, 0xf5, 0x4e, 0xf5, 0x4f, 0x90, 0xfa, 0xbf, -0x74, 0x3e, 0xf0, 0xa3, 0xe4, 0xf0, 0x90, 0xfa, 0xb7, 0xf0, 0xa3, 0x74, 0x15, 0xf0, 0xe0, 0x54, -0x3f, 0xff, 0xc3, 0x74, 0x40, 0x9f, 0x90, 0xfa, 0xbc, 0xf0, 0xd3, 0x94, 0x00, 0xe4, 0x94, 0x3e, -0x40, 0x08, 0x90, 0xfa, 0xc0, 0xe0, 0x90, 0xfa, 0xbc, 0xf0, 0x12, 0x0f, 0x98, 0xe5, 0x31, 0x45, -0x30, 0x70, 0x73, 0x12, 0x1c, 0xfa, 0x90, 0xfa, 0xbf, 0x12, 0x1e, 0x06, 0x60, 0x27, 0xd3, 0xef, -0x94, 0x40, 0xee, 0x94, 0x00, 0x40, 0x08, 0x90, 0xfa, 0xbc, 0x74, 0x40, 0xf0, 0x80, 0x08, 0x90, -0xfa, 0xc0, 0xe0, 0x90, 0xfa, 0xbc, 0xf0, 0x12, 0x0f, 0x98, 0xe5, 0x31, 0x45, 0x30, 0x70, 0x46, -0x12, 0x1c, 0xfa, 0x80, 0xd1, 0x75, 0x4c, 0x02, 0x90, 0xfa, 0xbf, 0xe4, 0xf0, 0xa3, 0x04, 0xf0, -0x90, 0xfa, 0xb7, 0xe4, 0xf0, 0xa3, 0x74, 0x0f, 0xf0, 0x7b, 0x00, 0x7a, 0x00, 0x79, 0x4c, 0x90, -0xfa, 0xc0, 0xe0, 0xf5, 0x4a, 0x7d, 0x0f, 0x7c, 0x00, 0x12, 0x29, 0x60, 0x75, 0x30, 0x00, 0x8f, -0x31, 0x7b, 0x00, 0x7a, 0x00, 0x79, 0x4c, 0xe4, 0xf5, 0x2d, 0xf5, 0x2e, 0x7d, 0x01, 0x12, 0x26, -0x98, 0xe4, 0xf5, 0x30, 0xf5, 0x31, 0xaf, 0x31, 0x02, 0x31, 0xa9, 0x12, 0x1d, 0x80, 0x30, 0xe7, -0x10, 0xe0, 0x54, 0x0f, 0x90, 0xf9, 0x67, 0xf0, 0xd3, 0x94, 0x00, 0x40, 0x15, 0xc2, 0x95, 0x80, -0x11, 0x90, 0xfa, 0xba, 0xe0, 0x54, 0x0f, 0x90, 0xf9, 0x65, 0xf0, 0xd3, 0x94, 0x00, 0x40, 0x02, -0xc2, 0x94, 0xe4, 0xff, 0x02, 0x31, 0xa9, 0x12, 0x1e, 0x4c, 0xbf, 0x01, 0x04, 0xd2, 0x93, 0x80, -0x02, 0xc2, 0x93, 0xe4, 0xff, 0x02, 0x31, 0xa9, 0x12, 0x1d, 0x80, 0x54, 0x03, 0x14, 0x60, 0x0a, -0x14, 0x60, 0x0f, 0x14, 0x60, 0x08, 0x24, 0x03, 0x70, 0x2b, 0xd2, 0x91, 0x80, 0x27, 0xc2, 0x91, -0x80, 0x23, 0x12, 0x1e, 0x56, 0x12, 0x0f, 0xc0, 0x60, 0x04, 0xd2, 0x91, 0x80, 0x17, 0x90, 0xff, -0xa4, 0xe0, 0x44, 0x10, 0x12, 0x0f, 0xc0, 0xff, 0xbf, 0xa0, 0x04, 0xc2, 0x91, 0x80, 0x02, 0xd2, -0x91, 0x12, 0x1e, 0x56, 0xf0, 0x90, 0xfa, 0xba, 0xe0, 0x54, 0x0c, 0xff, 0x13, 0x13, 0x54, 0x3f, -0x14, 0x60, 0x0a, 0x14, 0x60, 0x0f, 0x14, 0x60, 0x08, 0x24, 0x03, 0x70, 0x2b, 0xd2, 0x92, 0x80, -0x27, 0xc2, 0x92, 0x80, 0x23, 0x12, 0x1e, 0x5d, 0x12, 0x0f, 0xe0, 0x60, 0x04, 0xd2, 0x92, 0x80, -0x17, 0x90, 0xff, 0xb4, 0xe0, 0x44, 0x10, 0x12, 0x0f, 0xe0, 0xff, 0xbf, 0xa0, 0x04, 0xc2, 0x92, -0x80, 0x02, 0xd2, 0x92, 0x12, 0x1e, 0x5d, 0xf0, 0xe4, 0xff, 0x02, 0x31, 0xa9, 0xe5, 0x35, 0x30, -0xe7, 0x07, 0xe4, 0xfd, 0x7f, 0x05, 0x02, 0x2f, 0xb4, 0x7f, 0x05, 0x02, 0x31, 0xa9, 0x12, 0x32, -0x7a, 0x22, 0x7b, 0x01, 0x7a, 0xfa, 0x79, 0xb6, 0x90, 0xfa, 0xb7, 0xe0, 0xf5, 0x2d, 0xa3, 0xe0, -0xf5, 0x2e, 0x7d, 0x01, 0x12, 0x26, 0x98, 0x90, 0xfa, 0xb7, 0xe4, 0x75, 0xf0, 0x03, 0x12, 0x1b, -0x1c, 0xab, 0x36, 0xaa, 0x37, 0xa9, 0x38, 0x22, 0xaa, 0x4e, 0xa9, 0x4f, 0x7b, 0xff, 0x90, 0xfa, -0xb7, 0xe0, 0xfc, 0xa3, 0xe0, 0xfd, 0x90, 0xfa, 0xbc, 0xe0, 0xf5, 0x4a, 0x12, 0x29, 0x60, 0x75, -0x30, 0x00, 0x8f, 0x31, 0x22, 0x12, 0x23, 0x61, 0x7e, 0x00, 0x8e, 0x30, 0x8f, 0x31, 0xef, 0x22, -0xf0, 0x7f, 0x01, 0x12, 0x12, 0x61, 0x90, 0xff, 0xa6, 0xe0, 0x90, 0xfa, 0xbb, 0xf0, 0x54, 0xa0, -0x22, 0x12, 0x26, 0x98, 0x8f, 0x4c, 0x7e, 0x00, 0xc3, 0xef, 0x95, 0x3c, 0xee, 0x95, 0x3b, 0x22, -0xf0, 0x7f, 0x01, 0x12, 0x12, 0x61, 0x90, 0xff, 0xb6, 0xe0, 0x90, 0xfa, 0xbb, 0xf0, 0x54, 0xa0, -0x22, 0x75, 0x39, 0x00, 0x75, 0x3a, 0x01, 0x02, 0x2c, 0xd8, 0x90, 0xfa, 0xb9, 0xe0, 0xff, 0x02, -0x32, 0x3f, 0x8e, 0x39, 0x8f, 0x3a, 0x02, 0x2c, 0xd8, 0x12, 0x23, 0x61, 0x7e, 0x00, 0x8e, 0x30, -0x8f, 0x31, 0xef, 0x22, 0x7d, 0x01, 0x12, 0x26, 0x98, 0x90, 0xfa, 0xb4, 0xe0, 0x22, 0xef, 0x90, -0xf8, 0x04, 0xf0, 0x22, 0xc0, 0xa8, 0xc2, 0xaf, 0xee, 0x60, 0x0a, 0xc0, 0x05, 0x7d, 0x7f, 0xdd, -0xfe, 0xde, 0xfa, 0xd0, 0x05, 0xef, 0xc3, 0x94, 0x15, 0x50, 0x03, 0xd0, 0xa8, 0x22, 0x13, 0x70, -0x03, 0xd0, 0xa8, 0x22, 0xff, 0xd5, 0x07, 0xfd, 0xd0, 0xa8, 0x22, 0xc0, 0x00, 0xc0, 0x01, 0xc0, -0x02, 0xc0, 0x04, 0xc0, 0x05, 0xe5, 0x3e, 0x24, 0x08, 0xf8, 0x86, 0x05, 0x53, 0x05, 0x7f, 0x7c, -0xff, 0x12, 0x10, 0xc0, 0x7f, 0x00, 0x7e, 0x00, 0xe5, 0x43, 0x60, 0x46, 0xfc, 0x90, 0xf9, 0x1d, -0xe0, 0x54, 0x7f, 0x6d, 0x70, 0x0f, 0xc0, 0x83, 0xc0, 0x82, 0xa3, 0xe0, 0xfe, 0xa3, 0xe0, 0xff, -0xa3, 0x15, 0x43, 0x80, 0x07, 0xa3, 0xa3, 0xa3, 0xdc, 0xe6, 0x80, 0x26, 0xdc, 0x06, 0xd0, 0x82, -0xd0, 0x83, 0x80, 0x1e, 0xe0, 0xf8, 0xa3, 0xe0, 0xf9, 0xa3, 0xe0, 0xfa, 0xd0, 0x82, 0xd0, 0x83, -0xe8, 0xf0, 0xa3, 0xe9, 0xf0, 0xa3, 0xea, 0xf0, 0xa3, 0xc0, 0x83, 0xc0, 0x82, 0xa3, 0xa3, 0xa3, -0x80, 0xda, 0x12, 0x11, 0x57, 0xd0, 0x05, 0xd0, 0x04, 0xd0, 0x02, 0xd0, 0x01, 0xd0, 0x00, 0x22, -0x85, 0xa8, 0x44, 0x75, 0xa8, 0x88, 0xec, 0x70, 0x02, 0x7c, 0x3f, 0x8c, 0x3d, 0x22, 0xe5, 0x3e, -0x24, 0x08, 0xf8, 0x76, 0x00, 0x12, 0x11, 0xae, 0x80, 0xfb, 0xc0, 0x00, 0xc0, 0x01, 0xc0, 0x02, -0xc0, 0x04, 0xc0, 0x06, 0x7c, 0xff, 0x12, 0x10, 0xc0, 0xe5, 0x43, 0x60, 0x42, 0xfe, 0x90, 0xf9, -0x1d, 0xe0, 0x54, 0x7f, 0x6f, 0x70, 0x0b, 0xc0, 0x83, 0xc0, 0x82, 0xa3, 0xa3, 0xa3, 0x15, 0x43, -0x80, 0x07, 0xa3, 0xa3, 0xa3, 0xde, 0xea, 0x80, 0x26, 0xde, 0x06, 0xd0, 0x82, 0xd0, 0x83, 0x80, -0xd8, 0xe0, 0xf8, 0xa3, 0xe0, 0xf9, 0xa3, 0xe0, 0xfa, 0xd0, 0x82, 0xd0, 0x83, 0xe8, 0xf0, 0xa3, -0xe9, 0xf0, 0xa3, 0xea, 0xf0, 0xa3, 0xc0, 0x83, 0xc0, 0x82, 0xa3, 0xa3, 0xa3, 0x80, 0xda, 0x78, -0x08, 0x08, 0x79, 0x18, 0x09, 0x7c, 0x01, 0xe6, 0x54, 0x7f, 0x6f, 0x70, 0x06, 0x76, 0x00, 0x77, -0x00, 0x80, 0x06, 0x08, 0x09, 0x0c, 0xbc, 0x08, 0xee, 0x12, 0x11, 0x57, 0xd0, 0x06, 0xd0, 0x04, -0xd0, 0x02, 0xd0, 0x01, 0xd0, 0x00, 0x22, 0x75, 0x3d, 0x00, 0x85, 0x44, 0xa8, 0x22, 0xc0, 0xf0, -0xc0, 0x82, 0xc0, 0x83, 0xc3, 0xe5, 0x43, 0x24, 0xe8, 0x50, 0x05, 0x12, 0x11, 0xae, 0x80, 0xf4, -0xef, 0x60, 0x31, 0x90, 0x31, 0x11, 0xe4, 0x93, 0xc3, 0x9f, 0x40, 0x2f, 0xc0, 0x04, 0x7c, 0xff, -0x12, 0x10, 0xc0, 0xd0, 0x04, 0x43, 0x07, 0x80, 0xe5, 0x43, 0x75, 0xf0, 0x03, 0xa4, 0x24, 0x1d, -0xf5, 0x82, 0xe4, 0x34, 0xf9, 0xf5, 0x83, 0xef, 0xf0, 0xec, 0xa3, 0xf0, 0xed, 0xa3, 0xf0, 0x05, -0x43, 0x12, 0x11, 0x57, 0xd0, 0x83, 0xd0, 0x82, 0xd0, 0xf0, 0x22, 0x02, 0x11, 0xdc, 0xc0, 0x04, -0x7c, 0x20, 0xd2, 0x8c, 0xd2, 0x8d, 0xd5, 0x04, 0xfd, 0xd0, 0x04, 0x22, 0x75, 0xa8, 0x00, 0x75, -0x88, 0x00, 0x75, 0xb8, 0x00, 0x75, 0xf0, 0x00, 0x75, 0xd0, 0x00, 0xe4, 0xf8, 0x90, 0xf8, 0x04, -0xf0, 0x90, 0x00, 0x00, 0xf6, 0x08, 0xb8, 0x00, 0xfb, 0x02, 0x00, 0x00, 0xc2, 0xaf, 0xe4, 0x90, -0xff, 0x48, 0xf0, 0x90, 0xff, 0x50, 0xf0, 0x90, 0xff, 0x08, 0xf0, 0x90, 0xff, 0x10, 0xf0, 0x90, -0xff, 0x80, 0xf0, 0xa3, 0xa3, 0xf0, 0xd2, 0xb1, 0xc2, 0xb0, 0x7e, 0xff, 0x7f, 0xff, 0x12, 0x10, -0x24, 0x7e, 0xff, 0x7f, 0xff, 0x12, 0x10, 0x24, 0x7e, 0xff, 0x7f, 0xff, 0x12, 0x10, 0x24, 0xd2, -0xb0, 0xd2, 0xb1, 0x7e, 0xff, 0x7f, 0xff, 0x12, 0x10, 0x24, 0x7e, 0xff, 0x7f, 0xff, 0x12, 0x10, -0x24, 0x7e, 0xff, 0x7f, 0xff, 0x12, 0x10, 0x24, 0x80, 0xcc, 0xc3, 0xee, 0x94, 0x02, 0x50, 0x04, -0x7e, 0x03, 0x7f, 0xe8, 0xef, 0xf4, 0xff, 0xee, 0xf4, 0xfe, 0x0f, 0xbf, 0x00, 0x01, 0x0e, 0x8f, -0x42, 0x8e, 0x41, 0x22, 0xc3, 0xef, 0x94, 0xbc, 0xee, 0x94, 0x02, 0x50, 0x04, 0x7e, 0x07, 0x7f, -0xd0, 0xef, 0xf4, 0xff, 0xee, 0xf4, 0xfe, 0x0f, 0xbf, 0x00, 0x01, 0x0e, 0x8f, 0x40, 0x8e, 0x3f, -0x22, 0xef, 0x70, 0x01, 0x22, 0xc0, 0x00, 0xc0, 0xa8, 0xc2, 0xaf, 0xe5, 0x3e, 0x24, 0x18, 0xf8, -0xa6, 0x07, 0xe5, 0x3e, 0x24, 0x08, 0xf8, 0xc6, 0x54, 0x7f, 0xf6, 0xd0, 0xa8, 0xe6, 0x30, 0xe7, -0x03, 0xd0, 0x00, 0x22, 0x12, 0x11, 0xae, 0x80, 0xf4, 0xc0, 0x00, 0x7f, 0x01, 0xef, 0x24, 0x08, -0xf8, 0xe6, 0x60, 0x09, 0x0f, 0xbf, 0x08, 0xf5, 0x12, 0x11, 0xae, 0x80, 0xee, 0xd0, 0x00, 0x22, -0xc0, 0xf0, 0xc0, 0x82, 0xc0, 0x83, 0xc0, 0x00, 0xc0, 0x06, 0xc0, 0x04, 0xed, 0x24, 0x10, 0xf8, -0x76, 0x9a, 0xed, 0x75, 0xf0, 0x21, 0xa4, 0x24, 0x05, 0xf5, 0x82, 0xe4, 0x34, 0xf8, 0xf5, 0x83, -0xc0, 0x82, 0xc0, 0x83, 0xa3, 0xa3, 0xe4, 0x78, 0x0d, 0xf0, 0xa3, 0xd8, 0xfc, 0xef, 0x54, 0x7f, -0x75, 0xf0, 0x02, 0xa4, 0x24, 0xf3, 0xf5, 0x82, 0xe5, 0xf0, 0x34, 0x30, 0xf5, 0x83, 0xe4, 0x93, -0xfe, 0x74, 0x01, 0x93, 0xfc, 0xd0, 0x83, 0xd0, 0x82, 0xec, 0xf0, 0xa3, 0xee, 0xf0, 0xed, 0x24, -0x08, 0xf8, 0xef, 0x44, 0x80, 0xf6, 0xd0, 0x04, 0xd0, 0x06, 0xd0, 0x00, 0xd0, 0x83, 0xd0, 0x82, -0xd0, 0xf0, 0x22, 0x75, 0x3e, 0x00, 0x75, 0x43, 0x00, 0x7a, 0x08, 0x79, 0x18, 0x78, 0x08, 0x76, -0x00, 0x77, 0x00, 0x08, 0x09, 0xda, 0xf8, 0x90, 0xf8, 0x04, 0xe0, 0xfc, 0x90, 0x31, 0x11, 0xe4, -0x93, 0xc3, 0x9c, 0x50, 0x05, 0xe4, 0x90, 0xf8, 0x04, 0xf0, 0x78, 0x08, 0x74, 0x80, 0x44, 0x7f, -0xf6, 0x74, 0x01, 0x44, 0x10, 0xf5, 0x89, 0x75, 0xb8, 0x00, 0xd2, 0xab, 0xd2, 0xa9, 0x22, 0x75, -0x81, 0x8b, 0xd2, 0x8e, 0xd2, 0x8c, 0xd2, 0xaf, 0xe5, 0x43, 0x60, 0x36, 0xff, 0x90, 0xf9, 0x1d, -0xe0, 0x54, 0x80, 0x60, 0x28, 0x78, 0x08, 0x79, 0x08, 0xe0, 0x54, 0x7f, 0xfa, 0x7b, 0x00, 0xe6, -0x54, 0x7f, 0xb5, 0x02, 0x02, 0x7b, 0xff, 0x08, 0xd9, 0xf5, 0xeb, 0x70, 0x10, 0xea, 0xf0, 0xc0, -0x07, 0x12, 0x12, 0x89, 0xad, 0x07, 0xaf, 0x02, 0x12, 0x12, 0xa0, 0xd0, 0x07, 0xa3, 0xa3, 0xa3, -0xdf, 0xce, 0x12, 0x11, 0xae, 0x80, 0xc1, 0x8f, 0x24, 0x12, 0x2a, 0xc7, 0x12, 0x22, 0xb5, 0xa3, -0xa3, 0xe0, 0xa3, 0x30, 0xe7, 0x28, 0x78, 0x7e, 0x12, 0x22, 0x99, 0xe0, 0x44, 0x01, 0xf0, 0x12, -0x22, 0xfa, 0x12, 0x22, 0x9d, 0xe0, 0x20, 0xe0, 0xf6, 0x12, 0x23, 0x50, 0x74, 0x02, 0xf0, 0x12, -0x22, 0xda, 0xe0, 0xa3, 0x30, 0xe5, 0x07, 0x12, 0x23, 0x50, 0xe0, 0x44, 0x01, 0xf0, 0x78, 0x80, -0xe6, 0xfe, 0x08, 0xe6, 0xff, 0x8e, 0x83, 0x24, 0x08, 0x12, 0x22, 0xa1, 0xe0, 0xfd, 0x12, 0x23, -0x39, 0x8a, 0x83, 0x24, 0x0a, 0x12, 0x22, 0xa1, 0xed, 0xf0, 0x12, 0x23, 0x06, 0x24, 0x07, 0x12, -0x22, 0xa1, 0xe0, 0xff, 0x12, 0x23, 0x5a, 0x24, 0x09, 0x12, 0x22, 0xa1, 0xef, 0xf0, 0x90, 0xf9, -0x16, 0xe0, 0x30, 0xe4, 0x20, 0x08, 0x12, 0x22, 0xb7, 0xc0, 0x83, 0xc0, 0x82, 0xa3, 0xe0, 0x25, -0xe0, 0xff, 0x05, 0x82, 0xd5, 0x82, 0x02, 0x15, 0x83, 0x15, 0x82, 0xe0, 0x33, 0xd0, 0x82, 0xd0, -0x83, 0xf0, 0xa3, 0xef, 0xf0, 0x12, 0x22, 0xb5, 0xe0, 0xfc, 0xa3, 0xe0, 0xfd, 0xec, 0xff, 0x12, -0x23, 0x39, 0x8a, 0x83, 0x24, 0x08, 0x12, 0x22, 0xa1, 0xef, 0xf0, 0xed, 0x12, 0x23, 0x5a, 0x24, -0x07, 0x12, 0x22, 0xa1, 0xed, 0xf0, 0x12, 0x22, 0xa9, 0xe0, 0x30, 0xe6, 0x0a, 0x12, 0x23, 0x41, -0x24, 0x09, 0x12, 0x22, 0xa1, 0xe4, 0xf0, 0x12, 0x22, 0xa9, 0xe0, 0xff, 0x30, 0xe7, 0x1b, 0x12, -0x23, 0x1e, 0x24, 0x09, 0x12, 0x22, 0xa1, 0xe0, 0x60, 0x09, 0x12, 0x22, 0xa9, 0xef, 0x44, 0x02, -0xf0, 0x80, 0x07, 0x12, 0x22, 0xa9, 0xef, 0x54, 0xfd, 0xf0, 0x78, 0x7e, 0x12, 0x22, 0xb7, 0xa3, -0xa3, 0xe0, 0xff, 0x53, 0x07, 0xc7, 0x08, 0xe6, 0xfc, 0x08, 0xe6, 0xfd, 0x12, 0x22, 0xe0, 0xa3, -0xe0, 0x30, 0xe3, 0x12, 0x8d, 0x82, 0x8c, 0x83, 0xe5, 0x82, 0x24, 0x05, 0x12, 0x22, 0xa1, 0xe0, -0x90, 0x32, 0x51, 0x93, 0x42, 0x07, 0x53, 0x07, 0xfb, 0x12, 0x23, 0x1e, 0x24, 0x06, 0x12, 0x22, -0xa1, 0xe0, 0x60, 0x03, 0x43, 0x07, 0x04, 0x53, 0x07, 0xfc, 0x78, 0x80, 0x12, 0x23, 0x29, 0x24, -0x04, 0x12, 0x22, 0xa1, 0xe0, 0x42, 0x07, 0x43, 0x07, 0x80, 0x12, 0x23, 0x39, 0xf5, 0x82, 0x8a, -0x83, 0xa3, 0xa3, 0xef, 0xf0, 0x12, 0x23, 0x5a, 0x24, 0x04, 0x12, 0x22, 0xa1, 0xe0, 0xff, 0x8d, -0x82, 0x8c, 0x83, 0xa3, 0xa3, 0xe0, 0xfc, 0xa3, 0xe0, 0xfd, 0x30, 0xe1, 0x05, 0x53, 0x07, 0xdf, -0x80, 0x03, 0x43, 0x07, 0x20, 0xec, 0x30, 0xe4, 0x05, 0x53, 0x07, 0xef, 0x80, 0x03, 0x43, 0x07, -0x10, 0x12, 0x22, 0xa9, 0xe0, 0xfe, 0x54, 0x03, 0x60, 0x73, 0x53, 0x07, 0xdf, 0xee, 0x30, 0xe1, -0x69, 0x12, 0x23, 0x1e, 0x24, 0x09, 0x12, 0x22, 0xa1, 0xe0, 0x12, 0x1b, 0xfc, 0x15, 0x2c, 0x00, -0x15, 0x60, 0x01, 0x15, 0x65, 0x03, 0x15, 0x60, 0x05, 0x15, 0x65, 0x07, 0x15, 0x60, 0x09, 0x15, -0x65, 0x0b, 0x15, 0x60, 0x0d, 0x15, 0x65, 0x0f, 0x00, 0x00, 0x15, 0x6d, 0xe5, 0x24, 0x64, 0x03, -0x70, 0x21, 0x90, 0xf9, 0x16, 0xe0, 0x30, 0xe2, 0x0d, 0x30, 0xb4, 0x05, 0x43, 0x07, 0x02, 0x80, -0x2c, 0x53, 0x07, 0xfd, 0x80, 0x27, 0x30, 0x95, 0x05, 0x43, 0x07, 0x02, 0x80, 0x1f, 0x53, 0x07, -0xfd, 0x80, 0x1a, 0x30, 0x93, 0x05, 0x43, 0x07, 0x02, 0x80, 0x12, 0x53, 0x07, 0xfd, 0x80, 0x0d, -0x43, 0x07, 0x02, 0x80, 0x08, 0x53, 0x07, 0xfd, 0x80, 0x03, 0x53, 0x07, 0xfd, 0x12, 0x23, 0x27, -0x24, 0x04, 0x12, 0x22, 0xa1, 0xef, 0xf0, 0x8d, 0x82, 0x8c, 0x83, 0xa3, 0xa3, 0xa3, 0xe0, 0xff, -0x12, 0x22, 0xa9, 0xe0, 0xfe, 0x54, 0x03, 0x70, 0x03, 0x02, 0x16, 0x60, 0xee, 0x20, 0xe1, 0x03, -0x02, 0x16, 0x5d, 0x08, 0x12, 0x23, 0x20, 0x24, 0x09, 0x12, 0x22, 0xa1, 0xe0, 0x12, 0x1b, 0xfc, -0x15, 0xbf, 0x00, 0x15, 0xf5, 0x01, 0x15, 0xf5, 0x03, 0x16, 0x29, 0x05, 0x16, 0x29, 0x07, 0x16, -0x0f, 0x09, 0x16, 0x0f, 0x0b, 0x16, 0x43, 0x0d, 0x16, 0x43, 0x0f, 0x00, 0x00, 0x16, 0x60, 0xe5, -0x24, 0x64, 0x03, 0x70, 0x23, 0x90, 0xf9, 0x16, 0xe0, 0x30, 0xe2, 0x0f, 0x30, 0xb1, 0x06, 0x53, -0x07, 0x7f, 0x02, 0x16, 0x60, 0x43, 0x07, 0x80, 0x02, 0x16, 0x60, 0x30, 0x94, 0x05, 0x53, 0x07, -0x7f, 0x80, 0x7d, 0x43, 0x07, 0x80, 0x80, 0x78, 0x30, 0x92, 0x05, 0x53, 0x07, 0x7f, 0x80, 0x70, -0x43, 0x07, 0x80, 0x80, 0x6b, 0xe5, 0x24, 0xb4, 0x03, 0x09, 0x90, 0xff, 0x9e, 0xe0, 0x54, 0xef, -0xf0, 0x80, 0x07, 0x90, 0xff, 0x9e, 0xe0, 0x54, 0xdf, 0xf0, 0x53, 0x07, 0x7f, 0x80, 0x51, 0xe5, -0x24, 0xb4, 0x03, 0x09, 0x90, 0xff, 0x9e, 0xe0, 0x44, 0x10, 0xf0, 0x80, 0x07, 0x90, 0xff, 0x9e, -0xe0, 0x44, 0x20, 0xf0, 0x53, 0x07, 0x7f, 0x80, 0x37, 0xe5, 0x24, 0xb4, 0x03, 0x09, 0x90, 0xff, -0x9e, 0xe0, 0x54, 0xef, 0xf0, 0x80, 0x07, 0x90, 0xff, 0x9e, 0xe0, 0x54, 0xdf, 0xf0, 0x43, 0x07, -0x80, 0x80, 0x1d, 0xe5, 0x24, 0xb4, 0x03, 0x09, 0x90, 0xff, 0x9e, 0xe0, 0x44, 0x10, 0xf0, 0x80, -0x07, 0x90, 0xff, 0x9e, 0xe0, 0x44, 0x20, 0xf0, 0x43, 0x07, 0x80, 0x80, 0x03, 0x53, 0x07, 0x7f, -0x12, 0x22, 0xda, 0xe0, 0xfc, 0xa3, 0xe0, 0xfd, 0x30, 0xe0, 0x05, 0x43, 0x07, 0x20, 0x80, 0x03, -0x53, 0x07, 0xdf, 0xec, 0x30, 0xe3, 0x05, 0x43, 0x07, 0x40, 0x80, 0x03, 0x53, 0x07, 0xbf, 0xec, -0x30, 0xe0, 0x05, 0x43, 0x07, 0x10, 0x80, 0x03, 0x53, 0x07, 0xef, 0xed, 0x30, 0xe4, 0x05, 0x43, -0x07, 0x08, 0x80, 0x03, 0x53, 0x07, 0xf7, 0xed, 0x30, 0xe5, 0x05, 0x43, 0x07, 0x04, 0x80, 0x03, -0x53, 0x07, 0xfb, 0xed, 0x30, 0xe6, 0x05, 0x43, 0x07, 0x01, 0x80, 0x03, 0x53, 0x07, 0xfe, 0xed, -0x30, 0xe7, 0x05, 0x43, 0x07, 0x02, 0x80, 0x03, 0x53, 0x07, 0xfd, 0x78, 0x7e, 0x12, 0x22, 0xdc, -0xa3, 0xef, 0xf0, 0x12, 0x32, 0x84, 0x7f, 0x00, 0x22, 0x90, 0xff, 0xfa, 0x74, 0x08, 0xf0, 0xa3, -0x74, 0x16, 0xf0, 0x90, 0xff, 0xf9, 0x74, 0x02, 0xf0, 0x7b, 0x01, 0x7a, 0xfa, 0x79, 0xcf, 0xe4, -0xfd, 0x12, 0x23, 0x61, 0x90, 0xfa, 0xcf, 0xe4, 0x75, 0xf0, 0x03, 0x12, 0x1b, 0x1c, 0x12, 0x19, -0x92, 0xe5, 0x23, 0x30, 0xe7, 0x02, 0xd2, 0x02, 0x7b, 0x00, 0x7a, 0x00, 0x79, 0x24, 0x90, 0xfa, -0xcf, 0xe0, 0xf5, 0x2d, 0xa3, 0xe0, 0xf5, 0x2e, 0x7d, 0x01, 0x12, 0x26, 0x98, 0x90, 0xfa, 0xcf, -0xe4, 0xf0, 0xa3, 0x74, 0x0b, 0xf0, 0x7b, 0x00, 0x7a, 0x00, 0x79, 0x23, 0x75, 0x2d, 0x00, 0xf5, -0x2e, 0x7d, 0x01, 0x12, 0x26, 0x98, 0xe5, 0x23, 0x24, 0x80, 0x90, 0xff, 0xf8, 0xf0, 0xe5, 0x23, -0x64, 0x07, 0x60, 0x1e, 0xe5, 0x23, 0x64, 0x06, 0x60, 0x18, 0xe5, 0x23, 0x64, 0x14, 0x60, 0x12, -0xe5, 0x23, 0x64, 0x41, 0x60, 0x0c, 0xe5, 0x23, 0x64, 0x1a, 0x70, 0x46, 0xe5, 0x24, 0x64, 0x02, -0x70, 0x40, 0xe5, 0x23, 0xb4, 0x07, 0x16, 0xd2, 0x94, 0xd2, 0x95, 0xd2, 0x92, 0xd2, 0x93, 0x90, -0xf9, 0x16, 0xe0, 0x44, 0x02, 0xf0, 0xa3, 0xe0, 0x44, 0x02, 0xf0, 0x80, 0x1e, 0xe5, 0x23, 0xb4, -0x41, 0x12, 0x90, 0xf9, 0x16, 0xe0, 0x44, 0x06, 0xf0, 0xa3, 0xe0, 0x44, 0x06, 0xf0, 0xd2, 0xb1, -0xd2, 0xb4, 0x80, 0x07, 0x90, 0xf9, 0x16, 0xe0, 0x44, 0x01, 0xf0, 0x90, 0xf9, 0x17, 0xe0, 0x44, -0x01, 0xf0, 0xe5, 0x23, 0x64, 0x42, 0x60, 0x0c, 0xe5, 0x23, 0x64, 0x43, 0x60, 0x06, 0xe5, 0x23, -0x64, 0x44, 0x70, 0x2e, 0x90, 0xf9, 0x16, 0xe0, 0xff, 0xe5, 0x23, 0xb4, 0x44, 0x04, 0x7e, 0x40, -0x80, 0x02, 0x7e, 0x00, 0xee, 0x24, 0x80, 0x4f, 0x90, 0xf9, 0x16, 0xf0, 0xa3, 0xe0, 0xff, 0xe5, -0x23, 0xb4, 0x44, 0x04, 0x7e, 0x40, 0x80, 0x02, 0x7e, 0x00, 0xee, 0x24, 0x80, 0x4f, 0x90, 0xf9, -0x17, 0xf0, 0x90, 0xfa, 0xcf, 0xe4, 0xf0, 0xa3, 0x74, 0x0d, 0xf0, 0x12, 0x19, 0x92, 0x90, 0xff, -0xf5, 0xe5, 0x23, 0xf0, 0xe4, 0xf5, 0x35, 0xf5, 0x33, 0xf5, 0x34, 0xf5, 0x32, 0x12, 0x1e, 0x34, -0x12, 0x1c, 0xe0, 0x12, 0x1e, 0x3b, 0x90, 0xf9, 0x6a, 0x12, 0x1b, 0xf3, 0x90, 0xf9, 0x6f, 0x12, -0x1b, 0xf3, 0x90, 0xff, 0xff, 0xe4, 0xf0, 0x90, 0xff, 0x83, 0xe0, 0xe4, 0xf0, 0x90, 0xff, 0x81, -0x74, 0x80, 0xf0, 0xa3, 0x74, 0x84, 0xf0, 0x90, 0xff, 0x80, 0xf0, 0xe4, 0xf5, 0x23, 0xe5, 0x23, -0x12, 0x1d, 0x57, 0xf5, 0x83, 0xe4, 0xf0, 0xe5, 0x23, 0x12, 0x1d, 0x65, 0xf5, 0x83, 0xe4, 0xf0, -0x05, 0x23, 0xe5, 0x23, 0xb4, 0x07, 0xe7, 0x78, 0x7a, 0x76, 0xfe, 0x08, 0x76, 0xf0, 0x90, 0x32, -0x0a, 0xe4, 0x93, 0xff, 0x78, 0x78, 0xf6, 0xfd, 0xad, 0x07, 0x90, 0x32, 0x17, 0xe4, 0x93, 0xff, -0x08, 0xf6, 0xff, 0xed, 0x54, 0x0f, 0xfd, 0x12, 0x1d, 0x47, 0x74, 0x84, 0xf0, 0xed, 0x75, 0xf0, -0x08, 0xa4, 0x24, 0x47, 0xf5, 0x82, 0xe4, 0x34, 0xff, 0xf5, 0x83, 0xef, 0xf0, 0xc3, 0x74, 0xf0, -0x9f, 0x78, 0x7b, 0xf6, 0x74, 0xfe, 0x94, 0x00, 0x18, 0x12, 0x1c, 0xd8, 0xce, 0xc3, 0x13, 0xce, -0x13, 0xd8, 0xf9, 0xff, 0xed, 0x12, 0x1d, 0xa8, 0xef, 0xf0, 0xed, 0x12, 0x1d, 0xce, 0xe4, 0xf5, -0x23, 0xe5, 0x23, 0x90, 0x32, 0x04, 0x93, 0xff, 0x78, 0x78, 0xf6, 0xfd, 0xe5, 0x23, 0x25, 0xe0, -0x24, 0x0b, 0xf5, 0x82, 0xe4, 0x34, 0x32, 0xf5, 0x83, 0xe4, 0x93, 0x08, 0xf6, 0xed, 0x30, 0xe7, -0x53, 0x18, 0xe6, 0x54, 0x0f, 0xf9, 0x12, 0x1d, 0x47, 0x12, 0x1d, 0xb6, 0x24, 0x47, 0xf5, 0x82, -0xe4, 0x34, 0xff, 0x12, 0x1c, 0xc8, 0xce, 0xc3, 0x13, 0xce, 0x13, 0xd8, 0xf9, 0xff, 0xe9, 0x12, -0x1d, 0xa8, 0xef, 0xf0, 0x12, 0x1c, 0xcf, 0xce, 0xc3, 0x13, 0xce, 0x13, 0xd8, 0xf9, 0x12, 0x1d, -0xbb, 0x24, 0x45, 0xf5, 0x82, 0xe4, 0x34, 0xff, 0xf5, 0x83, 0xef, 0xf0, 0xe9, 0x12, 0x1d, 0xce, -0xe9, 0x75, 0xf0, 0x08, 0xa4, 0x24, 0x46, 0xf5, 0x82, 0xe4, 0x34, 0xff, 0xf5, 0x83, 0x74, 0x80, -0xf0, 0x02, 0x19, 0x67, 0x78, 0x78, 0xe6, 0x54, 0x0f, 0xf9, 0x12, 0x1d, 0x9a, 0x12, 0x1d, 0xb6, -0x24, 0x07, 0xf5, 0x82, 0xe4, 0x34, 0xff, 0x12, 0x1c, 0xc8, 0xce, 0xc3, 0x13, 0xce, 0x13, 0xd8, -0xf9, 0x12, 0x1d, 0xbb, 0x24, 0x01, 0xf5, 0x82, 0xe4, 0x34, 0xff, 0xf5, 0x83, 0xef, 0xf0, 0x12, -0x1c, 0xcf, 0xce, 0xc3, 0x13, 0xce, 0x13, 0xd8, 0xf9, 0x12, 0x1d, 0xbb, 0x24, 0x05, 0xf5, 0x82, -0xe4, 0x34, 0xff, 0xf5, 0x83, 0xef, 0xf0, 0xe9, 0x75, 0xf0, 0x08, 0xa4, 0x24, 0x02, 0xf5, 0x82, -0xe4, 0x34, 0xff, 0xf5, 0x83, 0xe4, 0xf0, 0xe9, 0x75, 0xf0, 0x08, 0xa4, 0x24, 0x06, 0xf5, 0x82, -0xe4, 0x34, 0xff, 0xf5, 0x83, 0xe4, 0xf0, 0x05, 0x23, 0xe5, 0x23, 0x64, 0x04, 0x60, 0x03, 0x02, -0x18, 0x91, 0x90, 0x32, 0x09, 0xe4, 0x93, 0xff, 0x78, 0x78, 0xf6, 0x12, 0x1d, 0x98, 0xe4, 0xf0, -0x90, 0x32, 0x08, 0x93, 0xff, 0xf6, 0x12, 0x1d, 0x45, 0xe4, 0xf0, 0x90, 0xff, 0xfd, 0x74, 0x05, -0xf0, 0x22, 0x7b, 0x00, 0x7a, 0x00, 0x79, 0x23, 0x90, 0xfa, 0xcf, 0xe4, 0x75, 0xf0, 0x01, 0x12, -0x1b, 0x32, 0x85, 0xf0, 0x2e, 0xf5, 0x2d, 0x7d, 0x01, 0x02, 0x26, 0x98, 0xe7, 0x09, 0xf6, 0x08, -0xdf, 0xfa, 0x80, 0x46, 0xe7, 0x09, 0xf2, 0x08, 0xdf, 0xfa, 0x80, 0x3e, 0x88, 0x82, 0x8c, 0x83, -0xe7, 0x09, 0xf0, 0xa3, 0xdf, 0xfa, 0x80, 0x32, 0xe3, 0x09, 0xf6, 0x08, 0xdf, 0xfa, 0x80, 0x78, -0xe3, 0x09, 0xf2, 0x08, 0xdf, 0xfa, 0x80, 0x70, 0x88, 0x82, 0x8c, 0x83, 0xe3, 0x09, 0xf0, 0xa3, -0xdf, 0xfa, 0x80, 0x64, 0x89, 0x82, 0x8a, 0x83, 0xe0, 0xa3, 0xf6, 0x08, 0xdf, 0xfa, 0x80, 0x58, -0x89, 0x82, 0x8a, 0x83, 0xe0, 0xa3, 0xf2, 0x08, 0xdf, 0xfa, 0x80, 0x4c, 0x80, 0xd2, 0x80, 0xfa, -0x80, 0xc6, 0x80, 0xd4, 0x80, 0x69, 0x80, 0xf2, 0x80, 0x33, 0x80, 0x10, 0x80, 0xa6, 0x80, 0xea, -0x80, 0x9a, 0x80, 0xa8, 0x80, 0xda, 0x80, 0xe2, 0x80, 0xca, 0x80, 0x33, 0x89, 0x82, 0x8a, 0x83, -0xec, 0xfa, 0xe4, 0x93, 0xa3, 0xc8, 0xc5, 0x82, 0xc8, 0xcc, 0xc5, 0x83, 0xcc, 0xf0, 0xa3, 0xc8, -0xc5, 0x82, 0xc8, 0xcc, 0xc5, 0x83, 0xcc, 0xdf, 0xe9, 0xde, 0xe7, 0x80, 0x0d, 0x89, 0x82, 0x8a, -0x83, 0xe4, 0x93, 0xa3, 0xf6, 0x08, 0xdf, 0xf9, 0xec, 0xfa, 0xa9, 0xf0, 0xed, 0xfb, 0x22, 0x89, -0x82, 0x8a, 0x83, 0xec, 0xfa, 0xe0, 0xa3, 0xc8, 0xc5, 0x82, 0xc8, 0xcc, 0xc5, 0x83, 0xcc, 0xf0, -0xa3, 0xc8, 0xc5, 0x82, 0xc8, 0xcc, 0xc5, 0x83, 0xcc, 0xdf, 0xea, 0xde, 0xe8, 0x80, 0xdb, 0x89, -0x82, 0x8a, 0x83, 0xe4, 0x93, 0xa3, 0xf2, 0x08, 0xdf, 0xf9, 0x80, 0xcc, 0x88, 0xf0, 0xef, 0x60, -0x01, 0x0e, 0x4e, 0x60, 0xc3, 0x88, 0xf0, 0xed, 0x24, 0x02, 0xb4, 0x04, 0x00, 0x50, 0xb9, 0xf5, -0x82, 0xeb, 0x24, 0x02, 0xb4, 0x04, 0x00, 0x50, 0xaf, 0x23, 0x23, 0x45, 0x82, 0x23, 0x90, 0x19, -0xfc, 0x73, 0xbb, 0x01, 0x06, 0x89, 0x82, 0x8a, 0x83, 0xe0, 0x22, 0x50, 0x02, 0xe7, 0x22, 0xbb, -0xfe, 0x02, 0xe3, 0x22, 0x89, 0x82, 0x8a, 0x83, 0xe4, 0x93, 0x22, 0xbb, 0x01, 0x0c, 0xe5, 0x82, -0x29, 0xf5, 0x82, 0xe5, 0x83, 0x3a, 0xf5, 0x83, 0xe0, 0x22, 0x50, 0x06, 0xe9, 0x25, 0x82, 0xf8, -0xe6, 0x22, 0xbb, 0xfe, 0x06, 0xe9, 0x25, 0x82, 0xf8, 0xe2, 0x22, 0xe5, 0x82, 0x29, 0xf5, 0x82, -0xe5, 0x83, 0x3a, 0xf5, 0x83, 0xe4, 0x93, 0x22, 0xbb, 0x01, 0x06, 0x89, 0x82, 0x8a, 0x83, 0xf0, -0x22, 0x50, 0x02, 0xf7, 0x22, 0xbb, 0xfe, 0x01, 0xf3, 0x22, 0xf8, 0xbb, 0x01, 0x0d, 0xe5, 0x82, -0x29, 0xf5, 0x82, 0xe5, 0x83, 0x3a, 0xf5, 0x83, 0xe8, 0xf0, 0x22, 0x50, 0x06, 0xe9, 0x25, 0x82, -0xc8, 0xf6, 0x22, 0xbb, 0xfe, 0x05, 0xe9, 0x25, 0x82, 0xc8, 0xf2, 0x22, 0xc5, 0xf0, 0xf8, 0xa3, -0xe0, 0x28, 0xf0, 0xc5, 0xf0, 0xf8, 0xe5, 0x82, 0x15, 0x82, 0x70, 0x02, 0x15, 0x83, 0xe0, 0x38, -0xf0, 0x22, 0xa3, 0xf8, 0xe0, 0xc5, 0xf0, 0x25, 0xf0, 0xf0, 0xe5, 0x82, 0x15, 0x82, 0x70, 0x02, -0x15, 0x83, 0xe0, 0xc8, 0x38, 0xf0, 0xe8, 0x22, 0xbb, 0x01, 0x10, 0xe5, 0x82, 0x29, 0xf5, 0x82, -0xe5, 0x83, 0x3a, 0xf5, 0x83, 0xe0, 0xf5, 0xf0, 0xa3, 0xe0, 0x22, 0x50, 0x09, 0xe9, 0x25, 0x82, -0xf8, 0x86, 0xf0, 0x08, 0xe6, 0x22, 0xbb, 0xfe, 0x0a, 0xe9, 0x25, 0x82, 0xf8, 0xe2, 0xf5, 0xf0, -0x08, 0xe2, 0x22, 0xe5, 0x83, 0x2a, 0xf5, 0x83, 0xe9, 0x93, 0xf5, 0xf0, 0xa3, 0xe9, 0x93, 0x22, -0xbb, 0x01, 0x0a, 0x89, 0x82, 0x8a, 0x83, 0xf0, 0xe5, 0xf0, 0xa3, 0xf0, 0x22, 0x50, 0x06, 0xf7, -0x09, 0xa7, 0xf0, 0x19, 0x22, 0xbb, 0xfe, 0x06, 0xf3, 0xe5, 0xf0, 0x09, 0xf3, 0x19, 0x22, 0xf8, -0xbb, 0x01, 0x11, 0xe5, 0x82, 0x29, 0xf5, 0x82, 0xe5, 0x83, 0x3a, 0xf5, 0x83, 0xe8, 0xf0, 0xe5, -0xf0, 0xa3, 0xf0, 0x22, 0x50, 0x09, 0xe9, 0x25, 0x82, 0xc8, 0xf6, 0x08, 0xa6, 0xf0, 0x22, 0xbb, -0xfe, 0x09, 0xe9, 0x25, 0x82, 0xc8, 0xf2, 0xe5, 0xf0, 0x08, 0xf2, 0x22, 0xa4, 0x25, 0x82, 0xf5, -0x82, 0xe5, 0xf0, 0x35, 0x83, 0xf5, 0x83, 0x22, 0xe6, 0xfb, 0x08, 0xe6, 0xfa, 0x08, 0xe6, 0xf9, -0x22, 0xeb, 0xf6, 0x08, 0xea, 0xf6, 0x08, 0xe9, 0xf6, 0x22, 0xe0, 0xfb, 0xa3, 0xe0, 0xfa, 0xa3, -0xe0, 0xf9, 0x22, 0xeb, 0xf0, 0xa3, 0xea, 0xf0, 0xa3, 0xe9, 0xf0, 0x22, 0xd0, 0x83, 0xd0, 0x82, -0xf8, 0xe4, 0x93, 0x70, 0x12, 0x74, 0x01, 0x93, 0x70, 0x0d, 0xa3, 0xa3, 0x93, 0xf8, 0x74, 0x01, -0x93, 0xf5, 0x82, 0x88, 0x83, 0xe4, 0x73, 0x74, 0x02, 0x93, 0x68, 0x60, 0xef, 0xa3, 0xa3, 0xa3, -0x80, 0xdf, 0xab, 0x36, 0xaa, 0x37, 0xa9, 0x38, 0xe5, 0x4c, 0x12, 0x1a, 0xe8, 0x74, 0x01, 0x25, -0x38, 0xf5, 0x38, 0xe4, 0x35, 0x37, 0xf5, 0x37, 0xab, 0x36, 0xfa, 0xa9, 0x38, 0x74, 0x11, 0x12, -0x1a, 0xe8, 0x74, 0x01, 0x25, 0x38, 0xf5, 0x38, 0xe4, 0x35, 0x37, 0xf5, 0x37, 0x90, 0xff, 0x06, -0xe0, 0xab, 0x36, 0xaa, 0x37, 0xa9, 0x38, 0x12, 0x1a, 0xe8, 0x74, 0x01, 0x25, 0x38, 0xf5, 0x38, -0xe4, 0x35, 0x37, 0xf5, 0x37, 0xab, 0x36, 0xfa, 0xa9, 0x38, 0xe4, 0x12, 0x1a, 0xe8, 0x04, 0x25, -0x38, 0xf5, 0x38, 0xe4, 0x35, 0x37, 0xf5, 0x37, 0xab, 0x36, 0xfa, 0xa9, 0x38, 0xe4, 0x12, 0x1a, -0xe8, 0x04, 0x25, 0x38, 0xf5, 0x38, 0xe4, 0x35, 0x37, 0xf5, 0x37, 0x90, 0xff, 0x04, 0xe0, 0xab, -0x36, 0xaa, 0x37, 0xa9, 0x38, 0x12, 0x1a, 0xe8, 0x74, 0x01, 0x25, 0x38, 0xf5, 0x38, 0xe4, 0x35, -0x37, 0xf5, 0x37, 0x90, 0xff, 0x05, 0xe0, 0xab, 0x36, 0xaa, 0x37, 0xa9, 0x38, 0x12, 0x1a, 0xe8, -0x74, 0x01, 0x25, 0x38, 0xf5, 0x38, 0xe4, 0x35, 0x37, 0xf5, 0x37, 0x22, 0xf5, 0x83, 0xe0, 0x54, -0x08, 0xab, 0x36, 0xaa, 0x37, 0xa9, 0x38, 0x22, 0xf5, 0x83, 0xef, 0xf0, 0xfd, 0x7c, 0x00, 0xc3, -0x78, 0x7b, 0xe6, 0x9d, 0xf6, 0x18, 0xe6, 0x9c, 0xf6, 0xe6, 0xfe, 0x08, 0xe6, 0x78, 0x03, 0x22, -0x75, 0x36, 0x01, 0x75, 0x37, 0xf9, 0x75, 0x38, 0x72, 0x22, 0xe0, 0x44, 0x04, 0xf0, 0x74, 0x13, -0x2f, 0xf5, 0x82, 0xe4, 0x34, 0xf9, 0xf5, 0x83, 0xe0, 0x22, 0x90, 0xfa, 0xbc, 0xe0, 0xff, 0x7e, -0x00, 0xc3, 0x90, 0xfa, 0xc0, 0xe0, 0x9f, 0xf0, 0x90, 0xfa, 0xbf, 0xe0, 0x9e, 0xf0, 0x90, 0xfa, -0xb7, 0xee, 0x8f, 0xf0, 0x12, 0x1b, 0x1c, 0xef, 0x25, 0x4f, 0xf5, 0x4f, 0xee, 0x35, 0x4e, 0xf5, -0x4e, 0x22, 0x7b, 0x01, 0x7a, 0xfa, 0x79, 0xb4, 0x90, 0xfa, 0xb7, 0xe0, 0xf5, 0x2d, 0xa3, 0xe0, -0xf5, 0x2e, 0x22, 0x78, 0x7c, 0xe6, 0xfe, 0x08, 0xe6, 0x8e, 0x83, 0x24, 0x04, 0xf5, 0x82, 0xe4, -0x35, 0x83, 0xf5, 0x83, 0x22, 0x54, 0x0f, 0x75, 0xf0, 0x08, 0xa4, 0x24, 0x40, 0xf5, 0x82, 0xe4, -0x34, 0xff, 0xf5, 0x83, 0x22, 0xe5, 0x4d, 0x75, 0xf0, 0x08, 0xa4, 0x24, 0x48, 0xf5, 0x82, 0xe4, -0x34, 0xff, 0x22, 0xe5, 0x4d, 0x75, 0xf0, 0x08, 0xa4, 0x24, 0x08, 0xf5, 0x82, 0xe4, 0x34, 0xff, -0x22, 0x90, 0xfa, 0xb9, 0xe0, 0xff, 0x24, 0xfc, 0x22, 0x90, 0xff, 0x00, 0xe0, 0x54, 0x1f, 0x22, -0x90, 0xfa, 0xbe, 0xe0, 0x90, 0xfa, 0xba, 0xf0, 0x22, 0x75, 0x33, 0x00, 0x8f, 0x34, 0x90, 0xf9, -0x6f, 0x12, 0x1b, 0xea, 0x90, 0x00, 0x02, 0x22, 0x54, 0x0f, 0x75, 0xf0, 0x08, 0xa4, 0x24, 0x00, -0xf5, 0x82, 0xe4, 0x34, 0xff, 0xf5, 0x83, 0x22, 0x75, 0xf0, 0x08, 0xa4, 0x24, 0x41, 0xf5, 0x82, -0xe4, 0x34, 0xff, 0xf5, 0x83, 0x22, 0x74, 0x80, 0xf0, 0x08, 0xe6, 0xff, 0xe9, 0x75, 0xf0, 0x08, -0xa4, 0x22, 0x74, 0xb2, 0x25, 0x22, 0xf5, 0x82, 0xe4, 0x34, 0xfa, 0xf5, 0x83, 0x22, 0x75, 0xf0, -0x08, 0xa4, 0x24, 0x42, 0xf5, 0x82, 0xe4, 0x34, 0xff, 0xf5, 0x83, 0x74, 0x80, 0xf0, 0x22, 0x90, -0xff, 0x82, 0xe0, 0x44, 0x08, 0xf0, 0x22, 0x90, 0xff, 0xfe, 0xe0, 0x44, 0x03, 0xf0, 0x90, 0xff, -0xfc, 0xe0, 0x54, 0xfd, 0xf0, 0x22, 0x78, 0x67, 0xe6, 0x54, 0xfd, 0xf6, 0x90, 0xff, 0xfd, 0x74, -0x65, 0xf0, 0x22, 0x12, 0x1b, 0xcc, 0xe0, 0xfe, 0xa3, 0xe0, 0xff, 0x4e, 0x22, 0x7b, 0x01, 0x7a, -0xfa, 0x79, 0xb7, 0x22, 0x90, 0xff, 0x80, 0xe0, 0x44, 0x08, 0xf0, 0x22, 0x90, 0xff, 0x83, 0xe0, -0x54, 0x7f, 0xf0, 0x22, 0xe0, 0xff, 0x90, 0xf9, 0x6a, 0x02, 0x1b, 0xea, 0x90, 0xff, 0xa4, 0xe0, -0x44, 0x02, 0xf0, 0x22, 0x75, 0x39, 0x01, 0x75, 0x3a, 0x09, 0x22, 0x7b, 0x01, 0x7a, 0xf9, 0x79, -0x72, 0x22, 0xd3, 0xe5, 0x3c, 0x94, 0x08, 0xe5, 0x3b, 0x94, 0x01, 0x22, 0x90, 0xfa, 0xbe, 0xe0, -0xff, 0x90, 0xfa, 0xba, 0xf0, 0x22, 0x90, 0xff, 0xa4, 0xe0, 0x54, 0xef, 0x22, 0x90, 0xff, 0xb4, -0xe0, 0x54, 0xef, 0x22, 0x12, 0x10, 0x4b, 0x78, 0x88, 0xef, 0xf6, 0x12, 0x2a, 0xc7, 0x12, 0x22, -0xfa, 0x8e, 0x83, 0x24, 0x09, 0x12, 0x22, 0xa1, 0xe0, 0xfd, 0x12, 0x22, 0xe8, 0x90, 0x00, 0x0a, -0x12, 0x23, 0x02, 0x24, 0x0a, 0x12, 0x22, 0xa1, 0xe0, 0x90, 0x00, 0x0b, 0x12, 0x1a, 0xfa, 0x12, -0x22, 0xfa, 0xf5, 0x82, 0x8e, 0x83, 0xa3, 0xa3, 0xa3, 0xe0, 0xf5, 0x53, 0x12, 0x23, 0x06, 0x24, -0x04, 0x12, 0x22, 0xa1, 0xe0, 0xf5, 0x54, 0x8f, 0x82, 0x8e, 0x83, 0xa3, 0xa3, 0xe0, 0xf5, 0x55, -0xe5, 0x53, 0xc4, 0x13, 0x13, 0x13, 0x54, 0x01, 0x78, 0x88, 0xf6, 0xd3, 0x94, 0x00, 0x40, 0x06, -0xe5, 0x54, 0x30, 0xe1, 0x01, 0x06, 0x78, 0x88, 0xe6, 0x12, 0x22, 0xe7, 0x90, 0x00, 0x0c, 0xef, -0x12, 0x1a, 0xfa, 0x12, 0x22, 0xb5, 0xa3, 0xa3, 0xe0, 0xfe, 0xa3, 0xe0, 0xff, 0x53, 0x07, 0x0c, -0x53, 0x06, 0xe6, 0xe5, 0x53, 0x30, 0xe5, 0x03, 0x43, 0x07, 0x01, 0xe5, 0x54, 0x20, 0xe5, 0x0e, -0xe5, 0x53, 0x54, 0x7f, 0x70, 0x08, 0xe5, 0x53, 0x20, 0xe7, 0x03, 0x43, 0x07, 0x02, 0xe5, 0x53, -0x30, 0xe3, 0x03, 0x43, 0x07, 0x10, 0xe5, 0x53, 0x30, 0xe2, 0x03, 0x43, 0x07, 0x20, 0xe5, 0x53, -0x54, 0x03, 0x60, 0x03, 0x43, 0x07, 0x40, 0xe5, 0x53, 0x30, 0xe1, 0x03, 0x43, 0x07, 0x80, 0xe5, -0x53, 0x30, 0xe4, 0x03, 0x43, 0x06, 0x01, 0xe5, 0x53, 0x30, 0xe6, 0x03, 0x43, 0x06, 0x08, 0xe5, -0x54, 0x20, 0xe4, 0x0e, 0xe5, 0x53, 0x54, 0x7f, 0x70, 0x08, 0xe5, 0x53, 0x20, 0xe7, 0x03, 0x43, -0x06, 0x10, 0x53, 0x07, 0xfb, 0x53, 0x06, 0x79, 0x90, 0x00, 0x05, 0xee, 0x8f, 0xf0, 0x12, 0x1b, -0x9f, 0xe5, 0x55, 0x30, 0xe3, 0x12, 0x54, 0x30, 0xff, 0xc4, 0x54, 0x0f, 0x12, 0x22, 0xe7, 0x90, -0x00, 0x08, 0xef, 0x12, 0x1a, 0xfa, 0x80, 0x0a, 0x12, 0x22, 0xe8, 0x90, 0x00, 0x08, 0xe4, 0x12, -0x1a, 0xfa, 0xe5, 0x55, 0x54, 0x03, 0x12, 0x22, 0xe7, 0x90, 0x00, 0x07, 0xef, 0x12, 0x1a, 0xfa, -0xe5, 0x55, 0x54, 0x04, 0xff, 0xc3, 0x13, 0x90, 0x00, 0x09, 0x12, 0x1a, 0xfa, 0x90, 0x00, 0x07, -0x12, 0x1a, 0xbb, 0x70, 0x13, 0x12, 0x22, 0xe8, 0xe9, 0x24, 0x09, 0xf9, 0xe4, 0x3a, 0xfa, 0x12, -0x1a, 0xa2, 0xff, 0xc3, 0x13, 0x12, 0x1a, 0xe8, 0x12, 0x23, 0x27, 0x24, 0x08, 0x12, 0x22, 0xa1, -0xe0, 0xfe, 0x8d, 0x82, 0x8c, 0x83, 0xe5, 0x82, 0x24, 0x07, 0x12, 0x22, 0xa1, 0xe0, 0xfd, 0xee, -0xed, 0x12, 0x22, 0xe7, 0x90, 0x00, 0x03, 0xee, 0x8f, 0xf0, 0x12, 0x1b, 0x9f, 0x12, 0x32, 0x84, -0x7d, 0x0a, 0xe4, 0xff, 0x12, 0x2f, 0xb4, 0x02, 0x10, 0xce, 0x90, 0xfa, 0xe6, 0xe0, 0xb4, 0x03, -0x06, 0x7e, 0x00, 0x7f, 0x40, 0x80, 0x04, 0x7e, 0x00, 0x7f, 0x08, 0x90, 0xfa, 0xda, 0xee, 0xf0, -0xa3, 0xef, 0xf0, 0x90, 0x00, 0x05, 0x12, 0x1a, 0xbb, 0xff, 0x7e, 0x00, 0x90, 0xfa, 0xd6, 0xee, -0xf0, 0xa3, 0xef, 0xf0, 0x70, 0x03, 0x7f, 0x08, 0x22, 0x90, 0x00, 0x08, 0x12, 0x1b, 0x48, 0xff, -0x90, 0xfa, 0xd8, 0xe5, 0xf0, 0xf0, 0xa3, 0xef, 0xf0, 0xae, 0x02, 0xaf, 0x01, 0x8e, 0x50, 0x8f, -0x51, 0x74, 0x0a, 0x25, 0x51, 0xf5, 0x51, 0xe4, 0x35, 0x50, 0xf5, 0x50, 0x90, 0xfa, 0xdb, 0xe0, -0xff, 0x14, 0xfe, 0x90, 0xfa, 0xd9, 0xe0, 0x5e, 0xfe, 0xc3, 0xef, 0x9e, 0xff, 0x90, 0xfa, 0xdd, -0xf0, 0xc3, 0x90, 0xfa, 0xd7, 0xe0, 0x9f, 0x90, 0xfa, 0xd6, 0xe0, 0x94, 0x00, 0x50, 0x06, 0xa3, -0xe0, 0x90, 0xfa, 0xdd, 0xf0, 0x12, 0x20, 0xa9, 0x60, 0x03, 0xe0, 0xff, 0x22, 0x12, 0x2e, 0x2b, -0x90, 0xfa, 0xd6, 0xe0, 0xfe, 0xa3, 0xe0, 0xff, 0x4e, 0x60, 0x2b, 0x90, 0xfa, 0xda, 0xe0, 0xfc, -0xa3, 0xe0, 0xfd, 0xd3, 0xef, 0x9d, 0xee, 0x9c, 0x40, 0x07, 0xe0, 0x90, 0xfa, 0xdd, 0xf0, 0x80, -0x08, 0x90, 0xfa, 0xd7, 0xe0, 0x90, 0xfa, 0xdd, 0xf0, 0x12, 0x20, 0xa9, 0x60, 0x03, 0xe0, 0xff, -0x22, 0x12, 0x2e, 0x2b, 0x80, 0xca, 0x7b, 0x00, 0x7a, 0x00, 0x79, 0x52, 0xe4, 0xf5, 0x2d, 0xf5, -0x2e, 0x7d, 0x01, 0x12, 0x26, 0x98, 0x7f, 0x00, 0x22, 0xaa, 0x50, 0xa9, 0x51, 0x7b, 0x01, 0x90, -0xfa, 0xd8, 0xe0, 0xfc, 0xa3, 0xe0, 0xfd, 0x90, 0xfa, 0xdd, 0xe0, 0xf5, 0x4a, 0x12, 0x29, 0x60, -0x90, 0xfa, 0xdc, 0xef, 0xf0, 0x22, 0xef, 0x24, 0xae, 0x60, 0x52, 0x24, 0xfe, 0x60, 0x2e, 0x24, -0xfe, 0x70, 0x03, 0x02, 0x21, 0x69, 0x24, 0x06, 0x60, 0x03, 0x02, 0x21, 0xb1, 0x78, 0x71, 0xe6, -0x54, 0xfb, 0xf6, 0x90, 0xff, 0xa5, 0xe0, 0xf5, 0x22, 0x44, 0x0f, 0xf0, 0x74, 0x33, 0x90, 0xfa, -0x94, 0xf0, 0xe5, 0x22, 0xa3, 0xf0, 0x90, 0xfa, 0xb2, 0x74, 0x01, 0xf0, 0x22, 0x78, 0x72, 0xe6, -0x54, 0xfb, 0xf6, 0x90, 0xff, 0xb5, 0xe0, 0xf5, 0x22, 0x44, 0x0f, 0xf0, 0x74, 0x43, 0x90, 0xfa, -0x96, 0xf0, 0xe5, 0x22, 0xa3, 0xf0, 0x90, 0xfa, 0xb3, 0x74, 0x01, 0xf0, 0x22, 0x90, 0xfa, 0xa0, -0xe0, 0xa3, 0x20, 0xe5, 0x03, 0x02, 0x21, 0xb1, 0x90, 0xff, 0xa6, 0xe0, 0x90, 0xfa, 0xcd, 0xf0, -0xa3, 0xf0, 0x90, 0xfa, 0xcd, 0xe0, 0xff, 0x54, 0x0f, 0xfe, 0x60, 0x10, 0x90, 0xff, 0xa6, 0x12, -0x23, 0x0d, 0x90, 0xff, 0xa6, 0xe0, 0x90, 0xfa, 0xcd, 0xf0, 0x80, 0xe6, 0x90, 0xfa, 0xce, 0xe0, -0xff, 0x74, 0x34, 0xfe, 0x12, 0x2d, 0x85, 0xef, 0x70, 0x57, 0x90, 0xfa, 0xce, 0xe0, 0xff, 0x74, -0x34, 0x90, 0xfa, 0x98, 0xf0, 0xef, 0xa3, 0xf0, 0x22, 0x90, 0xfa, 0xaa, 0xe0, 0xa3, 0x30, 0xe5, -0x40, 0x90, 0xff, 0xb6, 0xe0, 0x90, 0xfa, 0xcd, 0xf0, 0xa3, 0xf0, 0x90, 0xfa, 0xcd, 0xe0, 0xff, -0x54, 0x0f, 0xfe, 0x60, 0x10, 0x90, 0xff, 0xb6, 0x12, 0x23, 0x0d, 0x90, 0xff, 0xb6, 0xe0, 0x90, -0xfa, 0xcd, 0xf0, 0x80, 0xe6, 0x90, 0xfa, 0xce, 0xe0, 0xff, 0x74, 0x44, 0xfe, 0x12, 0x2d, 0x85, -0xef, 0x70, 0x0e, 0x90, 0xfa, 0xce, 0xe0, 0xff, 0x74, 0x44, 0x90, 0xfa, 0x9a, 0xf0, 0xef, 0xa3, -0xf0, 0x22, 0xc0, 0xe0, 0xc0, 0xf0, 0xc0, 0x83, 0xc0, 0x82, 0xc0, 0xd0, 0x75, 0xd0, 0x00, 0xc0, -0x00, 0xc0, 0x01, 0xc0, 0x02, 0xc0, 0x03, 0xc0, 0x04, 0xc0, 0x05, 0xc0, 0x06, 0xc0, 0x07, 0x90, -0xff, 0x92, 0xe0, 0xff, 0x90, 0xfa, 0xcc, 0xf0, 0x90, 0xff, 0x92, 0xe4, 0xf0, 0xef, 0x12, 0x1b, -0xfc, 0x22, 0x69, 0x26, 0x22, 0x69, 0x2e, 0x22, 0x0c, 0x30, 0x22, 0x0c, 0x32, 0x22, 0x1a, 0x38, -0x22, 0x2c, 0x3a, 0x22, 0x5e, 0x3e, 0x22, 0x49, 0x44, 0x22, 0x3e, 0x46, 0x22, 0x54, 0x50, 0x22, -0x54, 0x52, 0x22, 0x54, 0x54, 0x22, 0x54, 0x56, 0x00, 0x00, 0x22, 0x6e, 0x90, 0xfa, 0xcc, 0xe0, -0xfd, 0x7c, 0x00, 0x7f, 0x01, 0x12, 0x11, 0x5e, 0x80, 0x62, 0x7c, 0x00, 0x7d, 0x01, 0x7f, 0x03, -0x12, 0x11, 0x5e, 0x90, 0xff, 0xfe, 0xe0, 0x44, 0x20, 0xf0, 0x80, 0x50, 0x7c, 0x00, 0x7d, 0x01, -0x7f, 0x02, 0x12, 0x11, 0x5e, 0x90, 0xff, 0xfe, 0xe0, 0x44, 0x40, 0xf0, 0x80, 0x3e, 0x7c, 0x00, -0x7d, 0x01, 0x7f, 0x05, 0x12, 0x11, 0x5e, 0x80, 0x33, 0x7c, 0x00, 0x7d, 0x01, 0x7f, 0x06, 0x12, -0x11, 0x5e, 0x80, 0x28, 0x90, 0xfa, 0xcc, 0xe0, 0xff, 0x12, 0x20, 0xc6, 0x80, 0x1e, 0x7c, 0x00, -0x7d, 0x01, 0x7f, 0x04, 0x12, 0x11, 0x5e, 0x80, 0x13, 0x12, 0x28, 0x4e, 0x80, 0x0e, 0x90, 0xfa, -0xcc, 0xe0, 0x24, 0x00, 0xff, 0xe4, 0x34, 0xff, 0xfe, 0x12, 0x2d, 0x85, 0xd0, 0x07, 0xd0, 0x06, -0xd0, 0x05, 0xd0, 0x04, 0xd0, 0x03, 0xd0, 0x02, 0xd0, 0x01, 0xd0, 0x00, 0xd0, 0xd0, 0xd0, 0x82, -0xd0, 0x83, 0xd0, 0xf0, 0xd0, 0xe0, 0x32, 0x78, 0x7c, 0xe6, 0xfe, 0x08, 0xe6, 0x24, 0x04, 0x8e, -0x83, 0xf5, 0x82, 0xe4, 0x35, 0x83, 0xf5, 0x83, 0x22, 0x74, 0x13, 0x25, 0x24, 0xf5, 0x82, 0xe4, -0x34, 0xf9, 0xf5, 0x83, 0x22, 0x78, 0x80, 0xe6, 0xfe, 0x08, 0xe6, 0xf5, 0x82, 0x8e, 0x83, 0x22, -0x78, 0x80, 0xe6, 0xfe, 0x08, 0xe6, 0xaa, 0x06, 0xf8, 0xac, 0x02, 0x7d, 0x01, 0x7b, 0xff, 0x7a, -0x32, 0x79, 0x56, 0x7e, 0x00, 0x7f, 0x0a, 0x02, 0x1a, 0x7c, 0x78, 0x80, 0xe6, 0xfc, 0x08, 0xe6, -0xf5, 0x82, 0x8c, 0x83, 0xa3, 0xa3, 0x22, 0xff, 0x90, 0xf9, 0x6f, 0x02, 0x1b, 0xea, 0x90, 0xf9, -0x6a, 0x12, 0x1b, 0xea, 0x90, 0x00, 0x04, 0x02, 0x1a, 0xbb, 0x78, 0x7e, 0xe6, 0xfe, 0x08, 0xe6, -0xff, 0x22, 0xed, 0x12, 0x1a, 0xfa, 0x8f, 0x82, 0x8e, 0x83, 0xe5, 0x82, 0x22, 0xef, 0xf0, 0x90, -0xfa, 0xce, 0xe0, 0x54, 0x0f, 0x4e, 0xfe, 0xf0, 0xef, 0x54, 0xf0, 0x4e, 0xf0, 0x22, 0x78, 0x80, -0xe6, 0xfc, 0x08, 0xe6, 0x8c, 0x83, 0x22, 0x78, 0x7e, 0xe6, 0xfc, 0x08, 0xe6, 0xfd, 0x8c, 0x83, -0x22, 0xa6, 0x07, 0xe6, 0x24, 0x6e, 0xf8, 0xe6, 0x22, 0x78, 0x7e, 0xe6, 0xfa, 0x08, 0xe6, 0xfb, -0x22, 0x08, 0xe6, 0xfe, 0x08, 0xe6, 0x8e, 0x83, 0x22, 0x26, 0xf6, 0x18, 0xee, 0x36, 0xf6, 0x22, -0xef, 0x24, 0x0b, 0xf5, 0x82, 0xe4, 0x3e, 0xf5, 0x83, 0x22, 0x8b, 0x82, 0x8a, 0x83, 0xe5, 0x82, -0x22, 0x8b, 0x25, 0x8a, 0x26, 0x89, 0x27, 0x8d, 0x28, 0x90, 0xfa, 0xd2, 0xe4, 0xf0, 0xa3, 0x74, -0x02, 0xf0, 0x7b, 0x01, 0x7a, 0xfa, 0x79, 0xd1, 0x90, 0xfa, 0xd2, 0xe0, 0xf5, 0x2d, 0xa3, 0xe0, -0xf5, 0x2e, 0x7d, 0x01, 0x12, 0x26, 0x98, 0x90, 0xfa, 0xd1, 0xe0, 0x65, 0x28, 0x60, 0x46, 0xa3, -0xe0, 0xff, 0xa3, 0xe0, 0xa3, 0xcf, 0xf0, 0xa3, 0xef, 0xf0, 0x12, 0x23, 0xf0, 0x90, 0xfa, 0xd1, -0xe0, 0xff, 0x90, 0xfa, 0xd4, 0xe4, 0x8f, 0xf0, 0x12, 0x1b, 0x1c, 0x12, 0x23, 0xf0, 0x90, 0xfa, -0xd4, 0xe0, 0xff, 0xa3, 0xe0, 0x90, 0xfa, 0xd2, 0xcf, 0xf0, 0xa3, 0xef, 0xf0, 0x90, 0xfa, 0xd1, -0xe0, 0xa3, 0x75, 0xf0, 0x00, 0x12, 0x1b, 0x1c, 0x90, 0xfa, 0xd2, 0xe4, 0x75, 0xf0, 0x04, 0x12, -0x1b, 0x1c, 0x02, 0x23, 0x72, 0x90, 0xfa, 0xd3, 0xe0, 0x24, 0x01, 0xff, 0x90, 0xfa, 0xd2, 0xe0, -0x34, 0x00, 0xab, 0x25, 0xaa, 0x26, 0xa9, 0x27, 0x8f, 0xf0, 0x12, 0x1b, 0x80, 0x7f, 0x00, 0x22, -0x7b, 0x01, 0x7a, 0xfa, 0x79, 0xd1, 0x90, 0xfa, 0xd2, 0xe4, 0x75, 0xf0, 0x01, 0x12, 0x1b, 0x1c, -0x85, 0xf0, 0x2e, 0xf5, 0x2d, 0x7d, 0x01, 0x02, 0x26, 0x98, 0x8f, 0x62, 0x12, 0x2a, 0xc7, 0x12, -0x22, 0xfa, 0x8e, 0x83, 0x24, 0x0b, 0x12, 0x22, 0xa1, 0xe0, 0x54, 0xfb, 0xf0, 0x44, 0x02, 0xf0, -0x08, 0x12, 0x22, 0xdc, 0xe0, 0xa3, 0x30, 0xe5, 0x0c, 0x12, 0x23, 0x06, 0x24, 0x0b, 0x12, 0x22, -0xa1, 0xe0, 0x44, 0x01, 0xf0, 0x78, 0x7c, 0xe6, 0xfe, 0x08, 0xe6, 0xff, 0xf5, 0x82, 0x8e, 0x83, -0xe0, 0x54, 0xb8, 0xfd, 0xf0, 0xe5, 0x62, 0x24, 0xfe, 0x44, 0x20, 0xfc, 0x4d, 0xf0, 0xe5, 0x82, -0x24, 0x04, 0x12, 0x22, 0xa1, 0xe0, 0x54, 0xb8, 0xf0, 0x4c, 0xf0, 0x8f, 0x82, 0x8e, 0x83, 0xa3, -0x74, 0x03, 0xf0, 0x18, 0xe6, 0xfe, 0x08, 0xe6, 0xff, 0x8e, 0x83, 0x24, 0x05, 0x12, 0x22, 0xa1, -0xc0, 0x83, 0xc0, 0x82, 0xe0, 0xfd, 0x74, 0x99, 0x25, 0x62, 0xf5, 0x82, 0xe4, 0x34, 0xfa, 0xf5, -0x83, 0xe0, 0x54, 0xfc, 0x44, 0x03, 0xfc, 0xed, 0x4c, 0xd0, 0x82, 0xd0, 0x83, 0xf0, 0x8f, 0x82, -0x8e, 0x83, 0xe0, 0x44, 0x80, 0xf0, 0xe5, 0x82, 0x24, 0x04, 0x12, 0x22, 0xa1, 0xe0, 0x44, 0x80, -0xf0, 0x12, 0x32, 0x84, 0x74, 0x6e, 0x25, 0x62, 0xf8, 0x74, 0x04, 0x46, 0xf6, 0x7f, 0x00, 0x22, -0x12, 0x10, 0x4b, 0x7f, 0x02, 0x12, 0x12, 0x61, 0x78, 0x67, 0xe6, 0x44, 0x02, 0xf6, 0xd2, 0xb0, -0xd2, 0xb1, 0x90, 0xf9, 0x16, 0xe0, 0x30, 0xe7, 0x07, 0x90, 0xff, 0x9e, 0xe4, 0xf0, 0x80, 0x36, -0xd2, 0xb3, 0x90, 0xff, 0xa4, 0xe0, 0x90, 0xfa, 0x7e, 0xf0, 0x90, 0xff, 0xb4, 0xe0, 0x90, 0xfa, -0x7f, 0xf0, 0x90, 0xff, 0xa2, 0xe0, 0x90, 0xfa, 0x7c, 0xf0, 0x90, 0xff, 0xb2, 0xe0, 0x90, 0xfa, -0x7d, 0xf0, 0x90, 0xff, 0xa4, 0x74, 0x30, 0xf0, 0x90, 0xff, 0xb4, 0xf0, 0x90, 0xff, 0xa2, 0x74, -0x40, 0xf0, 0x90, 0xff, 0xb2, 0xf0, 0x90, 0xfa, 0xe7, 0xe5, 0xa8, 0xf0, 0x75, 0xa8, 0x81, 0x90, -0xff, 0x92, 0xe0, 0x60, 0x04, 0xe4, 0xf0, 0x80, 0xf6, 0x90, 0xff, 0xfd, 0x74, 0x3a, 0xf0, 0x43, -0x87, 0x01, 0x00, 0x00, 0x00, 0x90, 0xfa, 0x7e, 0xe0, 0x90, 0xff, 0xa4, 0xf0, 0x90, 0xfa, 0x7f, -0xe0, 0x90, 0xff, 0xb4, 0xf0, 0x90, 0xfa, 0x7c, 0xe0, 0x90, 0xff, 0xa2, 0xf0, 0x90, 0xfa, 0x7d, -0xe0, 0x90, 0xff, 0xb2, 0xf0, 0x90, 0xf9, 0x18, 0xe0, 0x60, 0x02, 0xc2, 0xb3, 0x90, 0xfa, 0xe7, -0xe0, 0xf5, 0xa8, 0x02, 0x10, 0xce, 0x8b, 0x5c, 0x8a, 0x5d, 0x89, 0x5e, 0x12, 0x2e, 0x0d, 0x90, -0xfa, 0xc3, 0x12, 0x1b, 0xf3, 0xaa, 0x5d, 0xa9, 0x5e, 0x90, 0xfa, 0xc6, 0x12, 0x1b, 0xf3, 0x90, -0xfa, 0xc7, 0xe4, 0x75, 0xf0, 0x0a, 0x12, 0x1b, 0x1c, 0x90, 0xfa, 0xc6, 0x12, 0x1b, 0xea, 0xe9, -0x24, 0x01, 0xf9, 0xe4, 0x3a, 0xfa, 0x90, 0xfa, 0xc9, 0x12, 0x1b, 0xf3, 0xab, 0x5c, 0xaa, 0x5d, -0xa9, 0x5e, 0x12, 0x2e, 0x19, 0xe0, 0xff, 0xc3, 0x13, 0xf0, 0xe4, 0x78, 0x82, 0xf6, 0x90, 0xfa, -0xc1, 0xe0, 0xff, 0x78, 0x82, 0xe6, 0xc3, 0x9f, 0x50, 0x4a, 0x90, 0xfa, 0xc3, 0x12, 0x2d, 0xee, -0xff, 0x78, 0x83, 0xf6, 0x90, 0xfa, 0xc6, 0x12, 0x2d, 0xee, 0xfe, 0xf4, 0x5f, 0xff, 0x78, 0x83, -0xf6, 0x12, 0x2d, 0xeb, 0x5e, 0x4f, 0xff, 0x78, 0x83, 0xf6, 0x12, 0x2d, 0xf4, 0x75, 0xf0, 0x02, -0x12, 0x1b, 0x1c, 0x90, 0xfa, 0xc7, 0xe4, 0x75, 0xf0, 0x02, 0x12, 0x1b, 0x1c, 0xab, 0x5c, 0xaa, -0x5d, 0xa9, 0x5e, 0x90, 0x00, 0x04, 0x12, 0x1a, 0xbb, 0x30, 0xe4, 0x03, 0x12, 0x2e, 0x03, 0x78, -0x82, 0x06, 0x80, 0xaa, 0xe4, 0x90, 0xfa, 0xc2, 0xf0, 0x22, 0x8b, 0x56, 0x8a, 0x57, 0x89, 0x58, -0x90, 0xfa, 0xc2, 0x74, 0x06, 0xf0, 0xe4, 0x90, 0xfa, 0xc1, 0xf0, 0x12, 0x1a, 0xa2, 0x24, 0x6e, -0x60, 0x26, 0x14, 0x70, 0x70, 0x12, 0x2d, 0xda, 0x60, 0x09, 0x24, 0x30, 0x70, 0x12, 0x12, 0x25, -0x56, 0x80, 0x62, 0x12, 0x2e, 0x24, 0x12, 0x1f, 0xda, 0x90, 0xfa, 0xc2, 0xef, 0xf0, 0x80, 0x55, -0x90, 0xfa, 0xc2, 0x74, 0x81, 0xf0, 0x80, 0x4d, 0x12, 0x2d, 0xda, 0x60, 0x09, 0x24, 0x30, 0x70, -0x3e, 0x12, 0x2d, 0x30, 0x80, 0x3f, 0xe5, 0x58, 0x24, 0x03, 0xf9, 0xe4, 0x35, 0x57, 0xfa, 0x7b, -0x01, 0xc0, 0x03, 0xc0, 0x02, 0xc0, 0x01, 0x12, 0x2e, 0x24, 0x90, 0x00, 0x05, 0x12, 0x1a, 0xbb, -0xfd, 0x90, 0x00, 0x08, 0x12, 0x1b, 0x48, 0xf5, 0x2e, 0x85, 0xf0, 0x2d, 0xd0, 0x01, 0xd0, 0x02, -0xd0, 0x03, 0x12, 0x26, 0x98, 0x90, 0xfa, 0xc1, 0xef, 0xf0, 0xe4, 0xa3, 0xf0, 0x80, 0x06, 0x90, -0xfa, 0xc2, 0x74, 0x81, 0xf0, 0x90, 0xfa, 0xc2, 0xe0, 0x12, 0x2e, 0x24, 0x90, 0x00, 0x02, 0x12, -0x1a, 0xfa, 0x90, 0xfa, 0xc1, 0xe0, 0xff, 0x22, 0x8b, 0x29, 0x8a, 0x2a, 0x89, 0x2b, 0x8d, 0x2c, -0xe5, 0x2c, 0x70, 0x03, 0xaf, 0x2c, 0x22, 0x12, 0x2e, 0x53, 0x70, 0x16, 0x12, 0x2e, 0x72, 0xe5, -0x2d, 0x90, 0xff, 0xf1, 0xf0, 0x12, 0x31, 0xd8, 0x50, 0xf2, 0x12, 0x27, 0x25, 0x40, 0x0b, 0x7f, -0x00, 0x22, 0x12, 0x2e, 0x72, 0x12, 0x27, 0x25, 0x50, 0xf8, 0x90, 0xff, 0xf3, 0x74, 0xa1, 0xf0, -0xe5, 0x2c, 0xb4, 0x01, 0x07, 0x90, 0xff, 0xf0, 0xe0, 0x44, 0x02, 0xf0, 0x90, 0xff, 0xf1, 0xe4, -0xf0, 0xf5, 0x2f, 0xe5, 0x2c, 0x14, 0xff, 0xe5, 0x2f, 0xc3, 0x9f, 0x50, 0x2a, 0x12, 0x31, 0xc1, -0x40, 0x03, 0xaf, 0x2f, 0x22, 0xc3, 0xe5, 0x2c, 0x95, 0x2f, 0xff, 0xbf, 0x02, 0x07, 0x90, 0xff, -0xf0, 0xe0, 0x44, 0x02, 0xf0, 0x12, 0x2e, 0x65, 0x05, 0x2f, 0x74, 0x01, 0x25, 0x2b, 0xf5, 0x2b, -0xe4, 0x35, 0x2a, 0xf5, 0x2a, 0x80, 0xcc, 0x12, 0x31, 0xc1, 0x40, 0x03, 0x7f, 0x18, 0x22, 0x12, -0x2e, 0x65, 0xaf, 0x2c, 0x22, 0x90, 0xff, 0xf1, 0xe5, 0x2e, 0xf0, 0x02, 0x31, 0xd8, 0x12, 0x10, -0x4b, 0x78, 0x84, 0x12, 0x23, 0x31, 0x30, 0xe1, 0x08, 0x7f, 0x13, 0x12, 0x31, 0xa9, 0x02, 0x27, -0xbc, 0x78, 0x84, 0xe6, 0xf9, 0x24, 0x13, 0x12, 0x22, 0xad, 0xe0, 0xff, 0x30, 0xe7, 0x40, 0x54, -0x03, 0x60, 0x1e, 0xe9, 0xb4, 0x03, 0x0d, 0x90, 0xff, 0x9e, 0xe0, 0x54, 0xfe, 0xf0, 0xe0, 0x44, -0x04, 0xf0, 0x80, 0x46, 0x90, 0xff, 0x9e, 0xe0, 0x54, 0xfd, 0xf0, 0xe0, 0x44, 0x08, 0xf0, 0x80, -0x39, 0xe9, 0xb4, 0x03, 0x0d, 0x90, 0xff, 0x9e, 0xe0, 0x54, 0xfb, 0xf0, 0xe0, 0x44, 0x01, 0xf0, -0x80, 0x28, 0x90, 0xff, 0x9e, 0xe0, 0x54, 0xf7, 0xf0, 0xe0, 0x44, 0x02, 0xf0, 0x80, 0x1b, 0xef, -0x54, 0x03, 0x60, 0x14, 0xe9, 0xb4, 0x03, 0x09, 0x90, 0xff, 0xa4, 0xe0, 0x54, 0xdf, 0xf0, 0x80, -0x07, 0x90, 0xff, 0xb4, 0xe0, 0x54, 0xdf, 0xf0, 0xc2, 0xb3, 0x90, 0xf9, 0x18, 0xe0, 0x04, 0xf0, -0xaf, 0x01, 0x12, 0x22, 0xee, 0xfd, 0x12, 0x2f, 0xe5, 0x12, 0x31, 0xa9, 0x02, 0x10, 0xce, 0x75, -0xa8, 0x40, 0x78, 0x7f, 0xe4, 0xf6, 0xd8, 0xfd, 0x75, 0x81, 0x8b, 0x02, 0x28, 0x09, 0x02, 0x31, -0x8c, 0xe4, 0x93, 0xa3, 0xf8, 0xe4, 0x93, 0xa3, 0x40, 0x03, 0xf6, 0x80, 0x01, 0xf2, 0x08, 0xdf, -0xf4, 0x80, 0x29, 0xe4, 0x93, 0xa3, 0xf8, 0x54, 0x07, 0x24, 0x0c, 0xc8, 0xc3, 0x33, 0xc4, 0x54, -0x0f, 0x44, 0x20, 0xc8, 0x83, 0x40, 0x04, 0xf4, 0x56, 0x80, 0x01, 0x46, 0xf6, 0xdf, 0xe4, 0x80, -0x0b, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x90, 0x2b, 0xa9, 0xe4, 0x7e, 0x01, 0x93, -0x60, 0xbc, 0xa3, 0xff, 0x54, 0x3f, 0x30, 0xe5, 0x09, 0x54, 0x1f, 0xfe, 0xe4, 0x93, 0xa3, 0x60, -0x01, 0x0e, 0xcf, 0x54, 0xc0, 0x25, 0xe0, 0x60, 0xa8, 0x40, 0xb8, 0xe4, 0x93, 0xa3, 0xfa, 0xe4, -0x93, 0xa3, 0xf8, 0xe4, 0x93, 0xa3, 0xc8, 0xc5, 0x82, 0xc8, 0xca, 0xc5, 0x83, 0xca, 0xf0, 0xa3, -0xc8, 0xc5, 0x82, 0xc8, 0xca, 0xc5, 0x83, 0xca, 0xdf, 0xe9, 0xde, 0xe7, 0x80, 0xbe, 0xe4, 0xf5, -0x22, 0x12, 0x1d, 0xc2, 0xe0, 0xb4, 0x04, 0x0d, 0xe5, 0x22, 0x24, 0x03, 0xff, 0x12, 0x30, 0x13, -0x12, 0x1d, 0xc2, 0xe4, 0xf0, 0x05, 0x22, 0xe5, 0x22, 0xc3, 0x94, 0x02, 0x40, 0xe3, 0xe4, 0xf5, -0x22, 0x75, 0xf0, 0x02, 0xe5, 0x22, 0x90, 0xfa, 0x94, 0x12, 0x1e, 0x03, 0x60, 0x2c, 0x12, 0x2d, -0x85, 0xef, 0x60, 0x52, 0x75, 0xf0, 0x02, 0xe5, 0x22, 0x90, 0xfa, 0x94, 0x12, 0x1b, 0xcc, 0xe4, -0xf0, 0xa3, 0xf0, 0x75, 0xf0, 0x0a, 0xe5, 0x22, 0x90, 0xfa, 0xa0, 0x12, 0x1b, 0xcc, 0xe0, 0xa3, -0x30, 0xe6, 0x33, 0x12, 0x1d, 0xc2, 0x74, 0x04, 0xf0, 0x22, 0x75, 0xf0, 0x02, 0xe5, 0x22, 0x90, -0xfa, 0x98, 0x12, 0x1e, 0x03, 0x60, 0x16, 0x12, 0x2d, 0x85, 0xef, 0x60, 0x19, 0x75, 0xf0, 0x02, -0xe5, 0x22, 0x90, 0xfa, 0x98, 0x12, 0x1b, 0xcc, 0xe4, 0xf0, 0xa3, 0xf0, 0x22, 0x05, 0x22, 0xe5, -0x22, 0xc3, 0x94, 0x02, 0x40, 0x9b, 0x22, 0xe4, 0xff, 0x90, 0xff, 0x83, 0xe0, 0x54, 0x0f, 0xfe, -0xef, 0xc3, 0x9e, 0x50, 0x17, 0x74, 0xf0, 0x2f, 0xf5, 0x82, 0xe4, 0x34, 0xfe, 0xf5, 0x83, 0xe0, -0x12, 0x1c, 0xc1, 0x12, 0x1a, 0xe8, 0x0f, 0x12, 0x1c, 0xb0, 0x80, 0xdd, 0xef, 0xfd, 0xc3, 0xe5, -0x3a, 0x9d, 0xf5, 0x3a, 0xe5, 0x39, 0x94, 0x00, 0xf5, 0x39, 0xd3, 0xe5, 0x3a, 0x94, 0x00, 0xe5, -0x39, 0x94, 0x00, 0x40, 0x06, 0xe4, 0x90, 0xff, 0x83, 0xf0, 0x22, 0x12, 0x1d, 0xdf, 0x12, 0x1e, -0x34, 0x12, 0x1e, 0x26, 0x12, 0x1a, 0xa2, 0x24, 0x6e, 0x60, 0x1e, 0x14, 0x60, 0x1b, 0x24, 0x8e, -0x70, 0x2d, 0x90, 0x00, 0x01, 0x12, 0x1a, 0xbb, 0xff, 0x24, 0xfc, 0x60, 0x03, 0x04, 0x70, 0x1f, -0xef, 0xfd, 0x7c, 0x00, 0x7f, 0x0d, 0x02, 0x11, 0x5e, 0x12, 0x1e, 0x3b, 0x12, 0x25, 0xfa, 0x12, -0x1d, 0x89, 0x12, 0x1a, 0xbb, 0x60, 0x03, 0x02, 0x32, 0x7a, 0xe4, 0xff, 0x12, 0x32, 0x6e, 0x22, -0x8b, 0x45, 0x8a, 0x46, 0x89, 0x47, 0x8c, 0x48, 0x8d, 0x49, 0xd2, 0x00, 0x12, 0x2e, 0x53, 0x70, -0x16, 0x12, 0x2e, 0x72, 0xe5, 0x48, 0x90, 0xff, 0xf1, 0xf0, 0x12, 0x31, 0xd8, 0x50, 0xf2, 0x12, -0x29, 0xd5, 0x40, 0x0b, 0x7f, 0x18, 0x22, 0x12, 0x2e, 0x72, 0x12, 0x29, 0xd5, 0x50, 0xf8, 0xe4, -0xf5, 0x4b, 0xe5, 0x4a, 0x14, 0xff, 0xe5, 0x4b, 0xc3, 0x9f, 0x50, 0x17, 0x12, 0x29, 0xc5, 0x40, -0x03, 0x7f, 0x18, 0x22, 0x05, 0x4b, 0x74, 0x01, 0x25, 0x47, 0xf5, 0x47, 0xe4, 0x35, 0x46, 0xf5, -0x46, 0x80, 0xdf, 0x90, 0xff, 0xf0, 0xe0, 0x44, 0x01, 0xf0, 0x12, 0x29, 0xc5, 0x40, 0x03, 0x7f, -0x18, 0x22, 0x7f, 0x00, 0x22, 0xab, 0x45, 0xaa, 0x46, 0xa9, 0x47, 0x12, 0x1a, 0xa2, 0x90, 0xff, -0xf1, 0xf0, 0x02, 0x31, 0xd8, 0x90, 0xff, 0xf1, 0xe5, 0x49, 0xf0, 0x02, 0x31, 0xd8, 0x7b, 0x01, -0x7a, 0xfa, 0x79, 0xcf, 0xe4, 0xfd, 0x12, 0x23, 0x61, 0x90, 0xfa, 0xcf, 0xe4, 0x75, 0xf0, 0x09, -0x12, 0x1b, 0x1c, 0x7b, 0x00, 0x7a, 0x00, 0x79, 0x23, 0x90, 0xfa, 0xcf, 0xe4, 0x75, 0xf0, 0x01, -0x12, 0x1b, 0x32, 0x85, 0xf0, 0x2e, 0xf5, 0x2d, 0x7d, 0x01, 0x12, 0x26, 0x98, 0x90, 0xff, 0xf7, -0xe5, 0x23, 0x12, 0x2a, 0x39, 0x90, 0xff, 0xf6, 0xe5, 0x23, 0xf0, 0x90, 0xfa, 0xcf, 0xe4, 0xf0, -0xa3, 0x74, 0x06, 0x12, 0x2a, 0x39, 0xe5, 0x23, 0x30, 0xe0, 0x07, 0x90, 0xff, 0xfc, 0x74, 0x94, -0xf0, 0x22, 0x90, 0xff, 0xfc, 0x74, 0x90, 0xf0, 0x22, 0xf0, 0x7b, 0x00, 0x7a, 0x00, 0x79, 0x23, -0x90, 0xfa, 0xcf, 0xe4, 0x75, 0xf0, 0x01, 0x12, 0x1b, 0x32, 0x85, 0xf0, 0x2e, 0xf5, 0x2d, 0x7d, -0x01, 0x02, 0x26, 0x98, 0x90, 0xff, 0x93, 0x74, 0x81, 0xf0, 0x90, 0xff, 0xff, 0xe0, 0x60, 0x06, -0x90, 0xff, 0xfc, 0x74, 0x10, 0xf0, 0x90, 0xff, 0x91, 0xe0, 0x44, 0x90, 0xf0, 0xe4, 0x90, 0xf9, -0x16, 0xf0, 0xa3, 0xf0, 0x12, 0x2b, 0x39, 0x12, 0x16, 0xc9, 0x12, 0x30, 0x69, 0x7e, 0x07, 0x7f, -0xd0, 0x12, 0x12, 0x2a, 0x7e, 0x0f, 0x7f, 0xa0, 0x12, 0x12, 0x44, 0xe4, 0x78, 0x77, 0xf6, 0x78, -0x77, 0xe6, 0xff, 0xc3, 0x94, 0x06, 0x50, 0x0b, 0x74, 0x6e, 0x2f, 0xf8, 0xe4, 0xf6, 0x78, 0x77, -0x06, 0x80, 0xec, 0x7f, 0x03, 0x12, 0x30, 0xb2, 0x90, 0xf9, 0x16, 0xe0, 0x20, 0xe4, 0x05, 0x7f, -0x04, 0x12, 0x30, 0xb2, 0x90, 0xff, 0x9b, 0xe4, 0xf0, 0x90, 0xff, 0x9a, 0xf0, 0x90, 0xff, 0xe8, -0xe0, 0x54, 0x1f, 0xf0, 0xd2, 0xa8, 0x22, 0x15, 0x65, 0xa8, 0x65, 0xa6, 0x07, 0x30, 0x08, 0x05, -0x12, 0x11, 0xae, 0x80, 0xf8, 0xd2, 0x08, 0xa8, 0x65, 0xe6, 0xff, 0xb4, 0x03, 0x0f, 0x78, 0x7c, -0x76, 0xff, 0x08, 0x76, 0xe0, 0x08, 0x76, 0xff, 0x08, 0x76, 0xa0, 0x80, 0x0d, 0x78, 0x7c, 0x76, -0xff, 0x08, 0x76, 0xe2, 0x08, 0x76, 0xff, 0x08, 0x76, 0xb0, 0x78, 0x80, 0x76, 0xfa, 0x08, 0x76, -0x9e, 0xef, 0x24, 0xfd, 0x75, 0xf0, 0x0a, 0xa4, 0xae, 0xf0, 0x12, 0x23, 0x49, 0x7b, 0x01, 0x7a, -0xff, 0x79, 0x48, 0x78, 0x68, 0x12, 0x1b, 0xe1, 0xa8, 0x65, 0xe6, 0x24, 0xfd, 0x75, 0xf0, 0x08, -0xa4, 0xff, 0xae, 0xf0, 0x78, 0x6a, 0x12, 0x23, 0x49, 0x79, 0x08, 0x78, 0x6b, 0x12, 0x1b, 0xe1, -0x78, 0x6d, 0xef, 0x12, 0x23, 0x49, 0x05, 0x65, 0x22, 0x90, 0xff, 0xf0, 0xe0, 0x54, 0xab, 0xf0, -0xe0, 0x44, 0x20, 0xf0, 0x90, 0xfa, 0xe6, 0x74, 0x02, 0xf0, 0x7b, 0x01, 0x7a, 0xfa, 0x79, 0xcf, -0xe4, 0xf5, 0x2d, 0xf5, 0x2e, 0x7d, 0x01, 0x12, 0x26, 0x98, 0x7e, 0x00, 0x90, 0xfa, 0xe4, 0xee, -0xf0, 0xa3, 0xef, 0xf0, 0x64, 0x01, 0x70, 0x10, 0x90, 0xfa, 0xcf, 0xe0, 0xb4, 0x52, 0x09, 0x90, -0xf9, 0x16, 0xe0, 0x54, 0xef, 0xf0, 0x80, 0x29, 0x90, 0xfa, 0xe4, 0xe0, 0x70, 0x04, 0xa3, 0xe0, -0x64, 0x01, 0x70, 0x10, 0x90, 0xfa, 0xcf, 0xe0, 0xb4, 0x10, 0x09, 0x90, 0xf9, 0x16, 0xe0, 0x44, -0x10, 0xf0, 0x80, 0x0d, 0x90, 0xfa, 0xe6, 0x74, 0x03, 0xf0, 0x90, 0xf9, 0x16, 0xe0, 0x54, 0xef, -0xf0, 0x90, 0xff, 0xf0, 0xe0, 0x44, 0x20, 0xf0, 0x22, 0x03, 0x68, 0x01, 0xff, 0x48, 0x03, 0x6b, -0x01, 0xff, 0x08, 0x02, 0x66, 0x00, 0x00, 0x44, 0xfa, 0x98, 0x00, 0x00, 0x00, 0x00, 0x44, 0xfa, -0x94, 0x00, 0x00, 0x00, 0x00, 0x42, 0xfa, 0xb2, 0x00, 0x00, 0x42, 0xfa, 0x7e, 0x00, 0x00, 0x42, -0xfa, 0x7c, 0x00, 0x00, 0x42, 0xf9, 0x6d, 0xff, 0xff, 0x42, 0xfa, 0x7a, 0x00, 0x00, 0x41, 0xf9, -0x66, 0xff, 0x41, 0xf9, 0x1c, 0x19, 0x41, 0xf9, 0x15, 0x00, 0x43, 0xf9, 0x19, 0x0a, 0x32, 0x02, -0x41, 0xf9, 0x68, 0x20, 0x41, 0xf9, 0x69, 0x20, 0x41, 0xf9, 0x65, 0x00, 0x41, 0xf9, 0x67, 0x00, -0x44, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x42, 0xf9, 0x16, 0x00, 0x00, 0x41, 0xf9, 0x18, 0x00, -0x01, 0x20, 0x00, 0x41, 0xf8, 0x04, 0x00, 0x00, 0x12, 0x10, 0x4b, 0x78, 0x8a, 0xef, 0xf6, 0x12, -0x2a, 0xc7, 0x12, 0x22, 0xee, 0x30, 0xe0, 0x29, 0x78, 0x7c, 0x12, 0x22, 0xb7, 0xe0, 0x54, 0x7f, -0xf0, 0x78, 0x6b, 0x12, 0x1b, 0xd8, 0x90, 0x00, 0x02, 0x12, 0x1a, 0xbb, 0x30, 0xe7, 0x09, 0x90, -0x00, 0x02, 0xe4, 0x12, 0x1a, 0xfa, 0x80, 0xe9, 0x78, 0x7c, 0x12, 0x22, 0xb7, 0xe0, 0x44, 0x80, -0xf0, 0x12, 0x22, 0xee, 0x30, 0xe1, 0x1e, 0x12, 0x22, 0x97, 0xe0, 0x54, 0x7f, 0xf0, 0x12, 0x32, -0x19, 0x78, 0x68, 0x12, 0x1b, 0xd8, 0x90, 0x00, 0x02, 0x74, 0x80, 0x12, 0x1a, 0xfa, 0x12, 0x22, -0x97, 0xe0, 0x44, 0x80, 0xf0, 0x12, 0x32, 0x84, 0xe4, 0xff, 0x12, 0x31, 0xa9, 0x02, 0x10, 0xce, -0x12, 0x10, 0x4b, 0x78, 0x85, 0xef, 0xf6, 0x12, 0x31, 0x50, 0x12, 0x31, 0xa9, 0x78, 0x85, 0xe6, -0xff, 0x24, 0x13, 0x12, 0x22, 0xad, 0xe0, 0xfe, 0x30, 0xe7, 0x16, 0xef, 0xb4, 0x03, 0x09, 0x90, -0xff, 0x9e, 0xe0, 0x54, 0xfa, 0xf0, 0x80, 0x22, 0x90, 0xff, 0x9e, 0xe0, 0x54, 0xf5, 0xf0, 0x80, -0x19, 0xee, 0x54, 0x03, 0x60, 0x14, 0xef, 0xb4, 0x03, 0x09, 0x90, 0xff, 0xa4, 0xe0, 0x44, 0x20, -0xf0, 0x80, 0x07, 0x90, 0xff, 0xb4, 0xe0, 0x44, 0x20, 0xf0, 0x90, 0xf9, 0x18, 0xe0, 0x14, 0xf0, -0xe0, 0x70, 0x02, 0xd2, 0xb3, 0x02, 0x10, 0xce, 0x12, 0x1e, 0x1c, 0xe5, 0x3a, 0x64, 0x09, 0x70, -0x04, 0xe5, 0x39, 0x64, 0x01, 0x60, 0x48, 0xc3, 0xe5, 0x3a, 0x94, 0x08, 0xe5, 0x39, 0x94, 0x00, -0x40, 0x11, 0x7f, 0x08, 0xef, 0xe5, 0x3a, 0x94, 0x08, 0xf5, 0x3a, 0xe5, 0x39, 0x94, 0x00, 0xf5, -0x39, 0x80, 0x05, 0xaf, 0x3a, 0x12, 0x1e, 0x34, 0xe4, 0xfe, 0xee, 0xc3, 0x9f, 0x50, 0x19, 0x12, -0x1c, 0xc1, 0x12, 0x1a, 0xa2, 0xfd, 0x74, 0xf8, 0x2e, 0xf5, 0x82, 0xe4, 0x34, 0xfe, 0xf5, 0x83, -0xed, 0xf0, 0x0e, 0x12, 0x1c, 0xb0, 0x80, 0xe2, 0xef, 0x54, 0x7f, 0x90, 0xff, 0x81, 0xf0, 0x22, -0x8b, 0x59, 0x8a, 0x5a, 0x89, 0x5b, 0x12, 0x2e, 0x19, 0x70, 0x05, 0xa3, 0x74, 0x08, 0xf0, 0x22, -0xab, 0x59, 0xaa, 0x5a, 0xa9, 0x5b, 0x12, 0x2e, 0x0d, 0x90, 0xfa, 0xc9, 0x12, 0x1b, 0xf3, 0xe5, -0x5b, 0x24, 0x03, 0xf9, 0xe4, 0x35, 0x5a, 0xfa, 0x90, 0xfa, 0xc3, 0x12, 0x1b, 0xf3, 0xe4, 0x90, -0xfa, 0xc2, 0xf0, 0x78, 0x8b, 0xf6, 0x90, 0xfa, 0xc1, 0xe0, 0xff, 0x78, 0x8b, 0xe6, 0xc3, 0x9f, -0x50, 0x12, 0x12, 0x2d, 0xeb, 0xff, 0x12, 0x2d, 0xf4, 0x12, 0x2e, 0x07, 0x78, 0x8b, 0x06, 0x12, -0x2e, 0x03, 0x80, 0xe2, 0x22, 0xad, 0x07, 0xac, 0x06, 0x90, 0x32, 0x0a, 0xe4, 0x93, 0xff, 0x78, -0x74, 0xf6, 0x54, 0x0f, 0x12, 0x1d, 0xa8, 0xe0, 0x08, 0x76, 0x00, 0x08, 0xf6, 0x18, 0x12, 0x1c, -0xd9, 0xc3, 0x33, 0xce, 0x33, 0xce, 0xd8, 0xf9, 0xff, 0x78, 0x75, 0xee, 0xf6, 0x08, 0xef, 0xf6, -0xee, 0x44, 0xf8, 0x18, 0xf6, 0xef, 0x08, 0xf6, 0x90, 0xff, 0x7a, 0xe0, 0x20, 0xe7, 0x03, 0x7f, -0x00, 0x22, 0x78, 0x75, 0xe6, 0xfe, 0x08, 0xe6, 0xf5, 0x82, 0x8e, 0x83, 0xec, 0xf0, 0xa3, 0xed, -0xf0, 0x90, 0xff, 0x7a, 0x74, 0x02, 0xf0, 0x7f, 0x01, 0x22, 0xab, 0x56, 0xaa, 0x57, 0xa9, 0x58, -0x90, 0x00, 0x03, 0x12, 0x1a, 0xbb, 0x54, 0xf0, 0x24, 0xa0, 0x22, 0x90, 0xfa, 0xc9, 0x12, 0x1b, -0xea, 0x02, 0x1a, 0xa2, 0x90, 0xfa, 0xc3, 0x12, 0x1b, 0xea, 0xef, 0x12, 0x1a, 0xe8, 0x90, 0xfa, -0xca, 0xe4, 0x22, 0x90, 0xfa, 0xc4, 0xe4, 0x75, 0xf0, 0x01, 0x02, 0x1b, 0x1c, 0x90, 0x00, 0x08, -0x12, 0x1b, 0x48, 0xaa, 0xf0, 0xf9, 0x7b, 0x01, 0x22, 0x90, 0x00, 0x05, 0x12, 0x1a, 0xbb, 0x90, -0xfa, 0xc1, 0xf0, 0x22, 0xab, 0x56, 0xaa, 0x57, 0xa9, 0x58, 0x22, 0x90, 0xfa, 0xdd, 0xe0, 0xff, -0x7e, 0x00, 0xc3, 0x90, 0xfa, 0xd7, 0xe0, 0x9f, 0xf0, 0x90, 0xfa, 0xd6, 0xe0, 0x9e, 0xf0, 0x90, -0xfa, 0xd8, 0xee, 0x8f, 0xf0, 0x12, 0x1b, 0x1c, 0xef, 0x25, 0x51, 0xf5, 0x51, 0xee, 0x35, 0x50, -0xf5, 0x50, 0x22, 0x90, 0xff, 0xf0, 0xe0, 0x54, 0xfe, 0xf0, 0xe0, 0x54, 0xfd, 0xf0, 0x90, 0xfa, -0xe6, 0xe0, 0x64, 0x03, 0x22, 0x90, 0xff, 0xf2, 0xe0, 0xab, 0x29, 0xaa, 0x2a, 0xa9, 0x2b, 0x02, -0x1a, 0xe8, 0x90, 0xff, 0xf3, 0x74, 0xa0, 0xf0, 0x22, 0x8f, 0x64, 0xed, 0x70, 0x0f, 0xe5, 0x64, -0xb4, 0x03, 0x05, 0x7f, 0x01, 0x02, 0x31, 0xef, 0x7f, 0x02, 0x02, 0x31, 0xef, 0xaf, 0x64, 0x12, -0x2a, 0xc7, 0x74, 0x6e, 0x25, 0x64, 0xf8, 0xe6, 0x30, 0xe2, 0x0b, 0xd2, 0x09, 0x12, 0x1d, 0x33, -0xe0, 0x54, 0x7f, 0xf0, 0x80, 0x02, 0xc2, 0x09, 0xe5, 0x64, 0xb4, 0x03, 0x07, 0x7f, 0x81, 0x12, -0x31, 0xef, 0x80, 0x05, 0x7f, 0x82, 0x12, 0x31, 0xef, 0x30, 0x09, 0x07, 0x12, 0x1d, 0x33, 0xe0, -0x44, 0x80, 0xf0, 0x12, 0x32, 0x84, 0x22, 0x12, 0x10, 0x4b, 0x90, 0xff, 0xfd, 0xe0, 0x44, 0x60, -0xf0, 0xd2, 0x01, 0x90, 0xff, 0xfc, 0xe0, 0x44, 0x02, 0xf0, 0x90, 0xff, 0x00, 0xe0, 0x30, 0xe7, -0x13, 0x90, 0xff, 0x83, 0xe0, 0x44, 0x80, 0xf0, 0x43, 0x35, 0x80, 0x90, 0xff, 0xfc, 0xe0, 0x44, -0x01, 0xf0, 0x80, 0x0d, 0x12, 0x1d, 0xdf, 0x53, 0x35, 0x7f, 0x90, 0xff, 0xfc, 0xe0, 0x54, 0xfe, -0xf0, 0x90, 0xff, 0x81, 0xe0, 0x44, 0x80, 0xf0, 0x12, 0x02, 0xde, 0x12, 0x1d, 0xe7, 0x02, 0x10, -0xce, 0x12, 0x10, 0x4b, 0x78, 0x89, 0xef, 0xf6, 0xd2, 0x00, 0x12, 0x2a, 0xc7, 0x90, 0xf9, 0x6a, -0x12, 0x1b, 0xea, 0xe9, 0x24, 0x03, 0xf9, 0xe4, 0x3a, 0xfa, 0xc0, 0x02, 0x78, 0x80, 0xe6, 0xfe, -0x08, 0xe6, 0xaa, 0x06, 0xf8, 0xac, 0x02, 0x7d, 0x01, 0xd0, 0x02, 0x12, 0x22, 0xd3, 0x12, 0x32, -0x84, 0x78, 0x89, 0xe6, 0xff, 0x12, 0x13, 0x87, 0x12, 0x31, 0xa9, 0x02, 0x10, 0xce, 0x8f, 0x63, -0x12, 0x2a, 0xc7, 0x78, 0x7c, 0x12, 0x22, 0xb7, 0xe0, 0x54, 0x3f, 0xf0, 0xe5, 0x82, 0x24, 0x04, -0x12, 0x22, 0xa1, 0xe0, 0x54, 0x3f, 0xf0, 0x12, 0x23, 0x41, 0x24, 0x0b, 0x12, 0x22, 0xa1, 0xe0, -0x54, 0xf8, 0xf0, 0x12, 0x32, 0x84, 0x74, 0x6e, 0x25, 0x63, 0xf8, 0x74, 0xfb, 0x56, 0xf6, 0x7f, -0x00, 0x22, 0x12, 0x10, 0x4b, 0x12, 0x2a, 0xc7, 0x12, 0x22, 0xfa, 0x24, 0x06, 0x12, 0x22, 0x9f, -0xe0, 0xfd, 0x12, 0x22, 0xe8, 0x90, 0x00, 0x03, 0x12, 0x23, 0x02, 0x24, 0x05, 0x12, 0x22, 0xa1, -0xe0, 0x90, 0x00, 0x04, 0x12, 0x1a, 0xfa, 0x12, 0x32, 0x84, 0x7d, 0x02, 0xe4, 0xff, 0x12, 0x2f, -0xb4, 0x02, 0x10, 0xce, 0xae, 0x05, 0x12, 0x1d, 0x8e, 0xef, 0x12, 0x1a, 0xfa, 0x0e, 0x0e, 0x0e, -0xee, 0xd3, 0x95, 0x3c, 0xe4, 0x95, 0x3b, 0x40, 0x02, 0xae, 0x3c, 0xee, 0xd3, 0x94, 0x08, 0x74, -0x80, 0x94, 0x81, 0x40, 0x0a, 0x7e, 0x03, 0x90, 0x00, 0x02, 0x74, 0x02, 0x12, 0x1a, 0xfa, 0xaf, -0x06, 0x12, 0x32, 0x6e, 0x22, 0xae, 0x07, 0xed, 0x54, 0x03, 0x64, 0x01, 0x60, 0x03, 0x7f, 0x10, -0x22, 0xed, 0x54, 0x7c, 0xc3, 0x94, 0x04, 0x50, 0x03, 0x7f, 0x0b, 0x22, 0x74, 0x6e, 0x2e, 0xf8, -0x74, 0x02, 0x46, 0xf6, 0x74, 0x99, 0x2e, 0xf5, 0x82, 0xe4, 0x34, 0xfa, 0xf5, 0x83, 0xed, 0xf0, -0x7f, 0x00, 0x22, 0xbf, 0x03, 0x06, 0x7c, 0xff, 0x7d, 0xe0, 0x80, 0x04, 0x7c, 0xff, 0x7d, 0xe2, -0x8d, 0x82, 0x8c, 0x83, 0xe0, 0x44, 0x80, 0xf0, 0xe5, 0x82, 0x24, 0x04, 0x12, 0x22, 0xa1, 0xe0, -0x44, 0x80, 0xf0, 0x74, 0x6e, 0x2f, 0xf8, 0x74, 0x04, 0x46, 0xf6, 0x7f, 0x00, 0x22, 0x12, 0x10, -0x4b, 0xe5, 0x3a, 0x64, 0x09, 0x70, 0x04, 0xe5, 0x39, 0x64, 0x01, 0x60, 0x16, 0x90, 0xff, 0x83, -0xe0, 0x54, 0x0f, 0xff, 0xc3, 0xe5, 0x3a, 0x9f, 0xe5, 0x39, 0x94, 0x00, 0x40, 0x05, 0x12, 0x28, -0xd7, 0x80, 0x03, 0x12, 0x32, 0x7a, 0x02, 0x10, 0xce, 0x90, 0xff, 0xfc, 0xe0, 0x20, 0xe7, 0x1f, -0xc2, 0xaf, 0x7d, 0xff, 0xac, 0x05, 0x1d, 0xec, 0x60, 0x15, 0x7e, 0x04, 0x7f, 0x00, 0xef, 0x1f, -0xaa, 0x06, 0x70, 0x01, 0x1e, 0x4a, 0x60, 0xec, 0x90, 0xff, 0x92, 0xe4, 0xf0, 0x80, 0xef, 0x22, -0x12, 0x10, 0x4b, 0x78, 0x66, 0xe6, 0xfe, 0x08, 0xe6, 0xff, 0x30, 0xe0, 0x12, 0x30, 0xe1, 0x0f, -0x90, 0xff, 0xfc, 0xe0, 0x44, 0x20, 0xf0, 0x7f, 0x04, 0x12, 0x12, 0x61, 0x12, 0x1d, 0xf6, 0x02, -0x10, 0xce, 0x8f, 0x23, 0xc2, 0x08, 0x12, 0x2a, 0xc7, 0x12, 0x22, 0xc0, 0x78, 0x7e, 0x12, 0x23, -0x42, 0x24, 0x0b, 0x12, 0x22, 0xa1, 0xe0, 0x54, 0xf8, 0xf0, 0x12, 0x32, 0x84, 0xaf, 0x23, 0x12, -0x13, 0x87, 0x22, 0x8e, 0x5f, 0x8f, 0x60, 0xe5, 0x60, 0x15, 0x60, 0xae, 0x5f, 0x70, 0x02, 0x15, -0x5f, 0xd3, 0x94, 0x00, 0xee, 0x94, 0x00, 0x40, 0x09, 0x7e, 0x07, 0x7f, 0xd0, 0x12, 0x10, 0x24, -0x80, 0xe5, 0x22, 0x11, 0xdc, 0x2e, 0xc7, 0x24, 0xb0, 0x32, 0x60, 0x30, 0x90, 0x30, 0x3e, 0x31, -0x6f, 0x2f, 0x82, 0x27, 0x2e, 0x2c, 0x80, 0x31, 0x12, 0x31, 0x31, 0x1e, 0x64, 0x2f, 0x11, 0x2c, -0x18, 0x0e, 0x12, 0x10, 0x4b, 0x78, 0x86, 0x12, 0x23, 0x31, 0x20, 0xe1, 0x07, 0x7f, 0x12, 0x12, -0x31, 0xa9, 0x80, 0x0a, 0x78, 0x86, 0xe6, 0xff, 0x12, 0x24, 0x0a, 0x12, 0x31, 0xa9, 0x02, 0x10, -0xce, 0x12, 0x10, 0x4b, 0x78, 0x87, 0x12, 0x23, 0x31, 0x20, 0xe2, 0x07, 0x7f, 0x11, 0x12, 0x31, -0xa9, 0x80, 0x0a, 0x78, 0x87, 0xe6, 0xff, 0x12, 0x2f, 0x4e, 0x12, 0x31, 0xa9, 0x02, 0x10, 0xce, -0x8f, 0x61, 0x12, 0x2f, 0x4e, 0xaf, 0x61, 0x12, 0x2a, 0xc7, 0x12, 0x22, 0xc0, 0x12, 0x32, 0x84, -0x74, 0x6e, 0x25, 0x61, 0xf8, 0x74, 0xfd, 0x56, 0xf6, 0xaf, 0x61, 0x12, 0x13, 0x87, 0x22, 0x12, -0x10, 0x4b, 0xe5, 0x3a, 0x64, 0x09, 0x70, 0x04, 0xe5, 0x39, 0x64, 0x01, 0x60, 0x05, 0x12, 0x2c, -0xd8, 0x80, 0x06, 0x12, 0x1e, 0x14, 0x12, 0x1e, 0x1c, 0x02, 0x10, 0xce, 0x12, 0x2a, 0x54, 0x12, -0x13, 0x03, 0x90, 0xf8, 0x04, 0xe0, 0xff, 0x60, 0x05, 0x7d, 0x01, 0x12, 0x12, 0xa0, 0x12, 0x29, -0xde, 0x12, 0x13, 0x3f, 0x12, 0x11, 0xbc, 0x80, 0xe3, 0x12, 0x1d, 0x8e, 0xef, 0x12, 0x1a, 0xfa, -0xe4, 0xf5, 0x33, 0xf5, 0x34, 0xef, 0x60, 0x03, 0x02, 0x32, 0x7a, 0xe4, 0xff, 0x12, 0x32, 0x6e, -0x22, 0x90, 0xff, 0xf0, 0xe0, 0xff, 0x54, 0xa0, 0x60, 0xf7, 0xef, 0x30, 0xe5, 0x08, 0x90, 0xff, -0xf0, 0x44, 0x20, 0xf0, 0xc3, 0x22, 0xd3, 0x22, 0x90, 0xff, 0xf0, 0xe0, 0xff, 0x54, 0x28, 0x60, -0xf7, 0xef, 0x30, 0xe5, 0x08, 0x90, 0xff, 0xf0, 0x44, 0x20, 0xf0, 0xc3, 0x22, 0xd3, 0x22, 0xef, -0x30, 0xe7, 0x08, 0x12, 0x1d, 0x45, 0xe0, 0x54, 0xdf, 0xf0, 0x22, 0xef, 0x12, 0x1d, 0x98, 0xe0, -0x54, 0xdf, 0xf0, 0x22, 0x81, 0x01, 0x82, 0x02, 0x83, 0x03, 0x87, 0x40, 0x00, 0x40, 0x00, 0x40, -0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0x08, 0x00, 0x78, 0x7e, 0x12, 0x22, 0xb7, 0xa3, 0xa3, -0xe0, 0xff, 0x30, 0xe7, 0x06, 0x54, 0x7f, 0xf0, 0x44, 0x80, 0xf0, 0x22, 0x85, 0x3b, 0x39, 0x85, -0x3c, 0x3a, 0x90, 0xff, 0x82, 0xe0, 0x54, 0xf7, 0xf0, 0xa3, 0xe0, 0x54, 0x7f, 0xf0, 0x22, 0xe4, -0xfe, 0xee, 0x90, 0x32, 0x04, 0x93, 0xb5, 0x07, 0x02, 0xd3, 0x22, 0x0e, 0xbe, 0x07, 0xf2, 0xc3, -0x22, 0x00, 0x08, 0x18, 0x28, 0x38, 0x01, 0x81, 0x90, 0x0a, 0x02, 0x00, 0x00, 0x11, 0x13, 0x00, -0x12, 0x10, 0x4b, 0x7f, 0x02, 0x12, 0x10, 0xda, 0x12, 0x1d, 0xf6, 0x02, 0x10, 0xce, 0x75, 0x39, -0x00, 0x8f, 0x3a, 0x12, 0x1c, 0xe0, 0x12, 0x2c, 0xd8, 0x22, 0x12, 0x1e, 0x1c, 0x12, 0x1d, 0xdf, -0x12, 0x1e, 0x14, 0x22, 0xc2, 0x08, 0x22, -}; - -#undef IMAGE_VERSION_NAME - -#undef IMAGE_ARRAY_NAME - diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 05e4fa730730..61daea3f7b2d 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -37,6 +37,7 @@ #include #include #include +#include #include #include #include @@ -52,13 +53,6 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman and David Iacovelli" #define DRIVER_DESC "Edgeport USB Serial Driver" - -/* firmware image code */ -#define IMAGE_VERSION_NAME PagableOperationalCodeImageVersion -#define IMAGE_ARRAY_NAME PagableOperationalCodeImage -#define IMAGE_SIZE PagableOperationalCodeSize -#include "io_fw_down3.h" /* Define array OperationalCodeImage[] */ - #define EPROM_PAGE_SIZE 64 @@ -231,7 +225,9 @@ static struct usb_driver io_driver = { }; -static struct EDGE_FIRMWARE_VERSION_INFO OperationalCodeImageVersion; +static unsigned char OperationalMajorVersion; +static unsigned char OperationalMinorVersion; +static unsigned short OperationalBuildNumber; static int debug; @@ -885,10 +881,13 @@ static int BuildI2CFirmwareHeader (__u8 *header, struct device *dev) __u8 *buffer; int buffer_size; int i; + int err; __u8 cs = 0; struct ti_i2c_desc *i2c_header; struct ti_i2c_image_header *img_header; struct ti_i2c_firmware_rec *firmware_rec; + const struct firmware *fw; + const char *fw_name = "edgeport/down3.bin"; // In order to update the I2C firmware we must change the type 2 record to type 0xF2. // This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver @@ -909,19 +908,34 @@ static int BuildI2CFirmwareHeader (__u8 *header, struct device *dev) // Set entire image of 0xffs memset (buffer, 0xff, buffer_size); + err = request_firmware(&fw, fw_name, dev); + if (err) { + printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + fw_name, err); + kfree(buffer); + return err; + } + + /* Save Download Version Number */ + OperationalMajorVersion = fw->data[0]; + OperationalMinorVersion = fw->data[1]; + OperationalBuildNumber = fw->data[2] | (fw->data[3] << 8); + // Copy version number into firmware record firmware_rec = (struct ti_i2c_firmware_rec *)buffer; - firmware_rec->Ver_Major = OperationalCodeImageVersion.MajorVersion; - firmware_rec->Ver_Minor = OperationalCodeImageVersion.MinorVersion; + firmware_rec->Ver_Major = OperationalMajorVersion; + firmware_rec->Ver_Minor = OperationalMinorVersion; // Pointer to fw_down memory image - img_header = (struct ti_i2c_image_header *)&PagableOperationalCodeImage[0]; + img_header = (struct ti_i2c_image_header *)&fw->data[4]; memcpy (buffer + sizeof(struct ti_i2c_firmware_rec), - &PagableOperationalCodeImage[sizeof(struct ti_i2c_image_header)], + &fw->data[4 + sizeof(struct ti_i2c_image_header)], le16_to_cpu(img_header->Length)); + release_firmware(fw); + for (i=0; i < buffer_size; i++) { cs = (__u8)(cs + buffer[i]); } @@ -935,8 +949,8 @@ static int BuildI2CFirmwareHeader (__u8 *header, struct device *dev) i2c_header->Type = I2C_DESC_TYPE_FIRMWARE_BLANK; i2c_header->Size = (__u16)buffer_size; i2c_header->CheckSum = cs; - firmware_rec->Ver_Major = OperationalCodeImageVersion.MajorVersion; - firmware_rec->Ver_Minor = OperationalCodeImageVersion.MinorVersion; + firmware_rec->Ver_Major = OperationalMajorVersion; + firmware_rec->Ver_Minor = OperationalMinorVersion; return 0; } @@ -1075,11 +1089,6 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) // Otherwise we will remain in configuring mode serial->product_info.TiMode = TI_MODE_CONFIGURING; - // Save Download Version Number - OperationalCodeImageVersion.MajorVersion = PagableOperationalCodeImageVersion.MajorVersion; - OperationalCodeImageVersion.MinorVersion = PagableOperationalCodeImageVersion.MinorVersion; - OperationalCodeImageVersion.BuildNumber = PagableOperationalCodeImageVersion.BuildNumber; - /********************************************************************/ /* Download Mode */ /********************************************************************/ @@ -1154,15 +1163,15 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) // Check version number of download with current version in I2c download_cur_ver = (firmware_version->Ver_Major << 8) + (firmware_version->Ver_Minor); - download_new_ver = (OperationalCodeImageVersion.MajorVersion << 8) + - (OperationalCodeImageVersion.MinorVersion); + download_new_ver = (OperationalMajorVersion << 8) + + (OperationalMinorVersion); dbg ("%s - >>>Firmware Versions Device %d.%d Driver %d.%d", __func__, firmware_version->Ver_Major, firmware_version->Ver_Minor, - OperationalCodeImageVersion.MajorVersion, - OperationalCodeImageVersion.MinorVersion); + OperationalMajorVersion, + OperationalMinorVersion); // Check if we have an old version in the I2C and update if necessary if (download_cur_ver != download_new_ver) { @@ -1170,8 +1179,8 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) __func__, firmware_version->Ver_Major, firmware_version->Ver_Minor, - OperationalCodeImageVersion.MajorVersion, - OperationalCodeImageVersion.MinorVersion); + OperationalMajorVersion, + OperationalMinorVersion); // In order to update the I2C firmware we must change the type 2 record to type 0xF2. // This will force the UMP to come up in Boot Mode. Then while in boot mode, the driver @@ -1377,6 +1386,9 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) __u8 cs = 0; __u8 *buffer; int buffer_size; + int err; + const struct firmware *fw; + const char *fw_name = "edgeport/down3.bin"; /* Validate Hardware version number * Read Manufacturing Descriptor from TI Based Edgeport @@ -1425,7 +1437,15 @@ static int TIDownloadFirmware (struct edgeport_serial *serial) // Initialize the buffer to 0xff (pad the buffer) memset (buffer, 0xff, buffer_size); - memcpy (buffer, &PagableOperationalCodeImage[0], PagableOperationalCodeSize); + err = request_firmware(&fw, fw_name, dev); + if (err) { + printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + fw_name, err); + kfree(buffer); + return err; + } + memcpy(buffer, &fw->data[4], fw->size - 4); + release_firmware(fw); for(i = sizeof(struct ti_i2c_image_header); i < buffer_size; i++) { cs = (__u8)(cs + buffer[i]); @@ -3119,6 +3139,7 @@ module_exit(edgeport_exit); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("edgeport/down3.bin"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/firmware/Makefile b/firmware/Makefile index be3a9e97d569..a162b2928fbd 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -61,6 +61,7 @@ endif fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \ edgeport/down.fw edgeport/down2.fw +fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \ # whiteheat_loader_debug.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw diff --git a/firmware/WHENCE b/firmware/WHENCE index 8eada2dbd562..79e62e2fea5d 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -293,3 +293,19 @@ Licence: Allegedly GPLv2+, but no source visible. Marked: Found in hex form in kernel source. -------------------------------------------------------------------------- + +Driver: USB_SERIAL_EDGEPORT_TI - USB Inside Out Edgeport Serial Driver +(TI Devices) + +File: edgeport/down3.bin + +Licence: +//************************************************************** +//* Edgeport Binary Image (for TI based products) +//* Generated by TIBin2C v2.00 (watchport) +//* Copyright (C) 2001 Inside Out Networks, All rights reserved. +//************************************************************** + +Found in hex form in kernel source. + +-------------------------------------------------------------------------- diff --git a/firmware/edgeport/down3.bin.ihex b/firmware/edgeport/down3.bin.ihex new file mode 100644 index 000000000000..7935e520878a --- /dev/null +++ b/firmware/edgeport/down3.bin.ihex @@ -0,0 +1,815 @@ +:100000000450000087329A0227BF0221B20000008C +:10001000000002001E0000000000000000000000C0 +:10002000000002011A853F8C85408AC0E0C0D0C024 +:10003000F0C082C083C000C001C002C003C004C0C1 +:1000400005C006C007E53E2408F8E6602BE53E241F +:1000500010F8A681E53E75F021A42405F582E4346C +:10006000F8F583788CE58104C398F9942240030263 +:1000700011DCE6F008A3D9FA7408253EF8053E081D +:10008000E65480700CE53EB407F37808753E0080B6 +:10009000EFE53E2410F88681E53E75F021A42405A5 +:1000A000F582E434F8F583788CE58104C398F9E0AF +:1000B000F608A3D9FAD007D006D005D004D003D0D3 +:1000C00002D001D000D083D082D0F0D0D0D0E032A6 +:1000D00030014D30B44810004590FF08E05420F83E +:1000E00090FF48E05420F990FF10E05420FA90FF70 +:1000F00050E05420FB7400F58274F8F583E0C8F0FA +:100100006860027E04A3E0C9F06960027E04A3E097 +:10011000CAF06A60027E04A3E0CBF06B60027E044A +:1001200022C0E0C0D0C0F0C082C083C000C001C007 +:1001300002C003C004C005C006C0077415F5827470 +:10014000F9F583E060237466F58274F9F583E014B1 +:10015000F0701674FFF0741CF58274F9F583E0609A +:100160000414F07004C29080FC90FF937481F0E559 +:100170008194FD40030211DC85418D85428B74B270 +:10018000F58274FAF583E0B4011BC082C08390FF4E +:100190004AE030E72C90FF4EE030E725D083D08254 +:1001A0007402F08020B4021DC082C08390FF7AE008 +:1001B00030E70512284E8009D083D0827403F08086 +:1001C00004D083D082A3E0B4011BC082C08390FF1F +:1001D00052E030E72C90FF56E030E725D083D08204 +:1001E0007402F08025B40222C082C08390FF7AE0BE +:1001F00030E70512284E8009D083D0827403F08046 +:1002000009D083D08280030202907416F58274F9BB +:10021000F583E02004F12002033001EB7419F5822C +:1002200074F9F583E014FCF0A3E0FDA3E0FE6404A0 +:10023000700FEC70627E011200C97C0A7DFA020226 +:10024000611200C9EE6404601DEC704B7C0AED1471 +:10025000FD7015EE640260077E027D320202617E4F +:10026000017DFA0202617C0A7419F58274F9F58342 +:10027000ECF0A3EDF0A3EEF014601820E10F2001E4 +:1002800006D2B1C2B08010C2B1D2B0800AC2B1C22F +:10029000B08004D2B0D2B1781979097A07E7700436 +:1002A000A600800BE6600816E67004E74480F708B5 +:1002B00009DAEAE53D601314F53D700EE53E2408C9 +:1002C000F87600121157D28CD28DD007D006D00507 +:1002D000D004D003D002D001D000D083D082D0F09F +:1002E000D0D0D0E03290FF04E090FAB9F090FF0651 +:1002F000E0FCA3E0FAECFFEAFEEFC39408EE940101 +:10030000500280047E017F088E3B8F3C90FF02E00C +:10031000FCA3E0FAECFFEA90FABDF0EFA3F0121CA8 +:10032000E0E4F54DE54DC39402500F121CC1E412F8 +:100330001AE8054D04121CB280EA121CE090FF007E +:10034000E0FF546024C070030208F32440600302FD +:100350000F6E90FAB9E0FE540FF54DEE30E703D37F +:100360008001C3920A90FF01E0121BFC0384000489 +:100370005701056A0306310506730607D508081DEF +:100380000908790A08B90B00000F6EE53520E7036C +:10039000020F6E90FABDE07002A3E06003020F6EE0 +:1003A000E53C6402453B6003020F6EEF541F14608E +:1003B0002B14604724026003020F6EEE6003020FED +:1003C0006E121CC17401121AE87867E630E0081258 +:1003D0001CC17402121AE87F0202326EE53520E178 +:1003E0000990FAB9E06003020F6E90FAB9E0D39475 +:1003F000014003020F6E7F0202326EE53520E10EEE +:1004000090FAB9E0FF600764806003020F6E120F7C +:10041000FA4003020F6EE54D7019300A0B90FF8011 +:10042000121CBE121AE8802490FF82121CBE121AFF +:10043000E88019154D300A0B121D55121CBC121AFA +:10044000E88009121D63121CBC121AE8121CC112AA +:100450001AA260057401121AE87F0202326EE535B5 +:1004600030E703020F6EE53C453B6003020F6E125E +:100470001D7914602D14605924026003020F6E90E0 +:10048000FABDE07004A3E064016003020F6E90FA0D +:10049000B9E06003020F6E7867E654FEF6E4FF02EF +:1004A000326EE53520E10620E003020F6EE53530BF +:1004B000E00990FAB9E06003020F6EE53530E10C17 +:1004C00090FAB9E0D394014003020F6EE4FF0232C8 +:1004D0006E90FABDE07002A3E06003020F6E120F8F +:1004E000FA4003020F6EE53520E10620E003020F1B +:1004F0006EE53530E007E54D6003020F6EE54D70A7 +:100500000F90FF82E054F7F090FF80E054F7F02264 +:10051000E54D24FE602024FB603424067035300A4B +:100520000CA20AE433FD7F03122E798026E4FD7FBE +:1005300003122E79801D300A0CA20AE433FD7F04D9 +:10054000122E79800EE4FD7F04122E7980057F87BC +:100550001231EF154D300A0B121D55F583E054F79B +:10056000F08009121D63F583E054F7F0E4FF0232D6 +:100570006EE53530E703020F6EE53C453B60030254 +:100580000F6E121D7914602D146055240260030251 +:100590000F6E90FABDE07004A3E064016003020FE7 +:1005A0006E90FAB9E06003020F6E7867E64401F6D8 +:1005B000E4FF02326EE53520E10620E003020F6E13 +:1005C000E53530E007E54D6003020F6EE53530E1BB +:1005D0000AE54DD394014003020F6EE4FF02326E30 +:1005E00090FABDE07002A3E06003020F6E90FAB9CA +:1005F000E0FF12323F4003020F6EE53520E1062096 +:10060000E003020F6EE54D7009300A03021E14026A +:100610001DDFE53520E103020F6E154D300A0B1288 +:100620001D55F583E04408F08009121D63F583E051 +:100630004408F0E4FF02326EE53530E703020F6E46 +:10064000E53C453B6003020F6E90FAB9E06003029F +:100650000F6E121D796003020F6EE53530E1030263 +:100660000F6E90FABEE090FFFFF0E06005433501A9 +:1006700080035335FEE4FF02326EE53520E70302C6 +:100680000F6EE53C453B7003020F6E121D7960034F +:10069000020F6E90FABDE0FCA3E0FDEC24FE603A90 +:1006A00014607524026003020F6EED6003020F6E8A +:1006B000121CE0121E0D7D03120FB56003020F6EB7 +:1006C000120F7290FAB6E0FDA3121D2B120FD1503B +:1006D000028004AE3BAF3C021002121CE090F916FF +:1006E000E030E40D121E0D7D14120FB56010020FE4 +:1006F0006E121E0D7D041210096003020F6E120FA0 +:100700007290FAB6E0FDA3121D2B120FD150028099 +:1007100004AE3BAF3C021002121E0D7D0512100903 +:100720006003020F6E7B017AFA79B6121D287D01F3 +:1007300012269890FAB7E475F003121B1C90FABECB +:10074000E090FAB5F0E4F54C90FAB5E0FFE54CC363 +:100750009F5024121D22121014FFFD90FAB7E48D51 +:10076000F0121B1C90FAB6E0C39FF0D39400500324 +:10077000020F6E054C80D1121D2212101424FEFFB0 +:1007800090FAB6F0FDA3E475F002121B1C7AF97919 +:10079000727B018B368A378938E92402F9E43AFA08 +:1007A000121D281226988F4C054C054C121CC1E5D1 +:1007B0004C121AE8121CC19000017403121AFAAF0D +:1007C0004C7E00C3EF953CEE953B50028004AE3B5F +:1007D000AF3C8E398F3A022CD8020F6EE53520E7F8 +:1007E00003020F6EE53C6401453B6003020F6E900F +:1007F000FAB9E06003020F6E90FABDE07002A3E068 +:100800006003020F6E121D796003020F6EE5352042 +:10081000E00620E103020F6E75360075370075386B +:1008200032020FF1E53530E703020F6EE53C453B40 +:100830006003020F6E90FAB9E06003020F6ED3906E +:10084000FABEE0940190FABDE094004003020F6EFE +:10085000121D796003020F6EE53520E00620E103EA +:10086000020F6E90FABEE0F532E5327008433501B2 +:100870005335FD80065335FE433502E4FF02326EE8 +:10088000E53520E703020F6EE53C6401453B60035C +:10089000020F6E90FAB9E06003020F6E90FABDE0AD +:1008A0007002A3E06003020F6E121D796401600301 +:1008B000020F6EE53520E103020F6E7F0102326EFA +:1008C000E53530E703020F6EE53C453B6003020F60 +:1008D0006ED390FABEE0940090FABDE0940040031D +:1008E000020F6E121D7964016003020F6EE5352060 +:1008F000E103020F6EE4FF02326E90FF01121E242C +:10090000EF121AE890FAB9121E24900001EF121AA1 +:10091000FA900002E4121AFA7403121CB290FABDA3 +:10092000E0FFA3E0853882853783CFF0A3EFF09016 +:10093000FF01E0121BFC097B02099D0409BF0509A8 +:10094000EB060A09070A27080A45090A630B0B1870 +:10095000800DB7810DE8820B5F830BA8840BC785E0 +:100960000C0C860C57870CE8880D73890A81920A53 +:1009700081930DA0B00E9BC00EC7C10ED8C200005F +:100980000F5DE53520E7057F050231A9121D716075 +:1009900003047009EFFD7C007F0702115EE4FD7F18 +:1009A00007022FB4E53520E7057F050231A9121DA6 +:1009B000716003047009EFFD7C007F0C02115EE49E +:1009C000FD7F07022FB4E53530E703020F71121ED9 +:1009D000425006E53C453B70057F020231A990FA82 +:1009E000B9E024FE24FD5002800302322C7F07026E +:1009F00031A9E53530E703020F71121D7160030460 +:100A00007009EFFD7C007F0802115E7F070231A9AB +:100A1000E53530E703020F71121D716003047009A0 +:100A2000EFFD7C007F0902115E7F070231A9E535E9 +:100A300030E703020F71121D716003047009EFFDAE +:100A40007C007F0A02115E7F070231A9E53530E79D +:100A500003020F71121D716003047009EFFD7C0029 +:100A60007F0B02115E7F070231A9E53530E70302F3 +:100A70000F71121D716003047009EFFD7C007F0E81 +:100A800002115E7F070231A9E53530E756121D7964 +:100A9000704A90FF02E0F54CE54CB48205754C615C +:100AA0008012E54CB48305754C628008E54CC45453 +:100AB000F004F54C121C22121E3B1225FA121D895D +:100AC000121ABB600512327A800685333985343AB2 +:100AD0007536017537F9753875022CD8E4FD7F0538 +:100AE000022FB4121D7960057F050231A9121E4242 +:100AF00040057F030231A990FF02E0F54CE54CB4BC +:100B00008205754C618012E54CB48305754C62809A +:100B100008E54CC454F004F54C121C2202322C128D +:100B20001E4C122AC7121D33E0547FF0000000E073 +:100B300090FABAF07868121BD8900002121ABB30F3 +:100B4000E7F2900002E4121AFA90FABAE04480FF49 +:100B5000F0787CE6FC08E68C83121D3BEFF0123245 +:100B600084E4FF0231A990FAB9E06401701F90FAA1 +:100B7000BDE0FF7E007006A3E0F590802DC2AFEFD0 +:100B8000F4529090FABEE04290D2AF801D90FABD30 +:100B9000E0FF7E007006A3E0F5B0800EC2AFEFF478 +:100BA00052B090FABEE042B0D2AFE4FF0231A912D7 +:100BB0001CE090FAB9E0B4010A121CC1E590121AC7 +:100BC000E88008121CC1E5B0121AE8020FF190FA91 +:100BD000B9E0FF2413121CF120E133121D80EF2431 +:100BE000FC601804702890FABAE0600990FFA4E055 +:100BF0004410F08019121E56F0801390FABAE0608B +:100C00000990FFB4E04410F08004121E5DF0E4FF90 +:100C10000231A990FAB9E0FF2413121CF120E13946 +:100C2000121D80EF24FC601B04702E90FABAE06065 +:100C30000990FFA4E04420F0801F90FFA4E054DF5F +:100C4000F0801690FABAE0600990FFB4E04420F01A +:100C5000800790FFB4E054DFF0E4FF0231A9121DD9 +:100C600080121D71604D046003020CE390FABAE03B +:100C7000600F90FFA4121CEA30E16F121E2C020CD0 +:100C8000E390FFA4E054FB121CEDFE30E15C30E287 +:100C90001130B405121E2C805190FFA4E054FDF0D9 +:100CA0008048309505121E2C804090FFA4E054FD32 +:100CB000F0803790FABAE0601290FFB4121CEA306C +:100CC000E12890FFB4E04402F0801F90FFB4E054AC +:100CD000FB121CED30E11330930990FFB4E04402A5 +:100CE000F0800790FFB4E054FDF0E4FF0231A91258 +:100CF0001D8090FAB9E024FC604004707890FABA44 +:100D0000E0601D90FFA2E04440F0A3E0FF30E76503 +:100D1000D203A3E054DFF090FFA3EF547FF080559F +:100D200030030E90FFA3E04480F0C203A3E0442010 +:100D3000F090FFA2E054BFF0803B90FABAE0601D53 +:100D400090FFB2E04440F0A3E0FF30E728D204A3D4 +:100D5000E054DFF090FFB3EF547FF0801830040EC2 +:100D600090FFB3E04480F0C204A3E04420F090FF81 +:100D7000B2E054BFF0E4FF0231A9121CE090FAB9CE +:100D8000E024FC600F04701690FFA6E0121CC11254 +:100D90001AE8800A90FFB6E0121CC1121AE87539F1 +:100DA00000753A01022CD890F9157401F090F91CE5 +:100DB0007419F090F96674FFF0E4FF0231A9E4FFC2 +:100DC0001231A9121DE77F0312126190F916E0306B +:100DD000E40890FF937480F0801090FFFCE0547F53 +:100DE000F07FFF7E001230D3C290C2AF0080FDE4DE +:100DF000F54EF54F90FABF743EF0A3E4F090FAB7C9 +:100E0000F0A37415F0E0543FFFC374409F90FABC08 +:100E1000F0D39400E4943E400890FAC0E090FABC0D +:100E2000F0120F98E53145307073121CFA90FABF3A +:100E3000121E066027D3EF9440EE9400400890FA0B +:100E4000BC7440F0800890FAC0E090FABCF0120F39 +:100E500098E53145307046121CFA80D1754C0290ED +:100E6000FABFE4F0A304F090FAB7E4F0A3740FF033 +:100E70007B007A00794C90FAC0E0F54A7D0F7C0047 +:100E80001229607530008F317B007A00794CE4F5CF +:100E90002DF52E7D01122698E4F530F531AF3102A3 +:100EA00031A9121D8030E710E0540F90F967F0D39C +:100EB00094004015C295801190FABAE0540F90F951 +:100EC00065F0D394004002C294E4FF0231A9121EDF +:100ED0004CBF0104D2938002C293E4FF0231A912F5 +:100EE0001D80540314600A14600F146008240370FA +:100EF0002BD2918027C2918023121E56120FC06000 +:100F000004D291801790FFA4E04410120FC0FFBFDD +:100F1000A004C2918002D291121E56F090FABAE05B +:100F2000540CFF1313543F14600A14600F1460082C +:100F30002403702BD2928027C2928023121E5D124E +:100F40000FE06004D292801790FFB4E04410120FBB +:100F5000E0FFBFA004C2928002D292121E5DF0E4B4 +:100F6000FF0231A9E53530E707E4FD7F05022FB424 +:100F70007F050231A912327A227B017AFA79B69082 +:100F8000FAB7E0F52DA3E0F52E7D0112269890FA30 +:100F9000B7E475F003121B1CAB36AA37A93822AA96 +:100FA0004EA94F7BFF90FAB7E0FCA3E0FD90FABC9E +:100FB000E0F54A1229607530008F31221223617EDC +:100FC000008E308F31EF22F07F0112126190FFA668 +:100FD000E090FABBF054A0221226988F4C7E00C3FA +:100FE000EF953CEE953B22F07F0112126190FFB627 +:100FF000E090FABBF054A022753900753A01022C3A +:10100000D890FAB9E0FF02323F8E398F3A022CD8DD +:101010001223617E008E308F31EF227D01122698DF +:1010200090FAB4E022EF90F804F022C0A8C2AFEE2C +:10103000600AC0057D7FDDFEDEFAD005EFC39415A2 +:101040005003D0A822137003D0A822FFD507FDD0EB +:10105000A822C000C001C002C004C005E53E2408AB +:10106000F8860553057F7CFF1210C07F007E00E5E7 +:10107000436046FC90F91DE0547F6D700FC083C043 +:1010800082A3E0FEA3E0FFA315438007A3A3A3DC94 +:10109000E68026DC06D082D083801EE0F8A3E0F94B +:1010A000A3E0FAD082D083E8F0A3E9F0A3EAF0A3AA +:1010B000C083C082A3A3A380DA121157D005D00445 +:1010C000D002D001D0002285A84475A888EC700217 +:1010D0007C3F8C3D22E53E2408F876001211AE805C +:1010E000FBC000C001C002C004C0067CFF1210C0DB +:1010F000E5436042FE90F91DE0547F6F700BC083A2 +:10110000C082A3A3A315438007A3A3A3DEEA80267E +:10111000DE06D082D08380D8E0F8A3E0F9A3E0FA1D +:10112000D082D083E8F0A3E9F0A3EAF0A3C083C0A3 +:1011300082A3A3A380DA7808087918097C01E65411 +:101140007F6F700676007700800608090CBC08EEF9 +:10115000121157D006D004D002D001D00022753D24 +:10116000008544A822C0F0C082C083C3E54324E8C0 +:1011700050051211AE80F4EF6031903111E493C349 +:101180009F402FC0047CFF1210C0D004430780E5AD +:101190004375F003A4241DF582E434F9F583EFF0E0 +:1011A000ECA3F0EDA3F00543121157D083D082D009 +:1011B000F0220211DCC0047C20D28CD28DD504FD3B +:1011C000D0042275A80075880075B80075F0007508 +:1011D000D000E4F890F804F0900000F608B800FBA6 +:1011E000020000C2AFE490FF48F090FF50F090FF83 +:1011F00008F090FF10F090FF80F0A3A3F0D2B1C2EE +:10120000B07EFF7FFF1210247EFF7FFF1210247E2E +:10121000FF7FFF121024D2B0D2B17EFF7FFF1210E9 +:10122000247EFF7FFF1210247EFF7FFF1210248098 +:10123000CCC3EE940250047E037FE8EFF4FFEEF49B +:10124000FE0FBF00010E8F428E4122C3EF94BCEE11 +:10125000940250047E077FD0EFF4FFEEF4FE0FBF40 +:1012600000010E8F408E3F22EF700122C000C0A807 +:10127000C2AFE53E2418F8A607E53E2408F8C65498 +:101280007FF6D0A8E630E703D000221211AE80F43A +:10129000C0007F01EF2408F8E660090FBF08F512CF +:1012A00011AE80EED00022C0F0C082C083C000C06A +:1012B00006C004ED2410F8769AED75F021A42405FB +:1012C000F582E434F8F583C082C083A3A3E4780DEB +:1012D000F0A3D8FCEF547F75F002A424F3F582E567 +:1012E000F03430F583E493FE740193FCD083D08214 +:1012F000ECF0A3EEF0ED2408F8EF4480F6D004D033 +:1013000006D000D083D082D0F022753E0075430015 +:101310007A0879187808760077000809DAF890F8E2 +:1013200004E0FC903111E493C39C5005E490F80470 +:10133000F078087480447FF674014410F58975B81C +:1013400000D2ABD2A92275818BD28ED28CD2AFE5DE +:10135000436036FF90F91DE05480602878087908D2 +:10136000E0547FFA7B00E6547FB502027BFF08D988 +:10137000F5EB7010EAF0C007121289AD07AF021248 +:1013800012A0D007A3A3A3DFCE1211AE80C18F2479 +:10139000122AC71222B5A3A3E0A330E728787E1251 +:1013A0002299E04401F01222FA12229DE020E0F698 +:1013B0001223507402F01222DAE0A330E507122360 +:1013C00050E04401F07880E6FE08E6FF8E832408B2 +:1013D0001222A1E0FD1223398A83240A1222A1EDF0 +:1013E000F012230624071222A1E0FF12235A240937 +:1013F0001222A1EFF090F916E030E420081222B793 +:10140000C083C082A3E025E0FF0582D58202158358 +:101410001582E033D082D083F0A3EFF01222B5E042 +:10142000FCA3E0FDECFF1223398A8324081222A1D9 +:10143000EFF0ED12235A24071222A1EDF01222A997 +:10144000E030E60A12234124091222A1E4F012221C +:10145000A9E0FF30E71B12231E24091222A1E0603D +:10146000091222A9EF4402F080071222A9EF54FDCD +:10147000F0787E1222B7A3A3E0FF5307C708E6FC6B +:1014800008E6FD1222E0A3E030E3128D828C83E5B2 +:101490008224051222A1E09032519342075307FBA8 +:1014A00012231E24061222A1E060034307045307FF +:1014B000FC788012232924041222A1E0420743076A +:1014C00080122339F5828A83A3A3EFF012235A24D2 +:1014D000041222A1E0FF8D828C83A3A3E0FCA3E091 +:1014E000FD30E1055307DF8003430720EC30E405BE +:1014F0005307EF80034307101222A9E0FE54036054 +:10150000735307DFEE30E16912231E24091222A172 +:10151000E0121BFC152C0015600115650315600514 +:1015200015650715600915650B15600D15650F002C +:1015300000156DE5246403702190F916E030E20D8A +:1015400030B405430702802C5307FD8027309505F2 +:10155000430702801F5307FD801A3093054307029B +:1015600080125307FD800D43070280085307FD805A +:10157000035307FD12232724041222A1EFF08D82CA +:101580008C83A3A3A3E0FF1222A9E0FE54037003FF +:10159000021660EE20E10302165D081223202409E2 +:1015A0001222A1E0121BFC15BF0015F50115F50371 +:1015B000162905162907160F09160F0B16430D16C7 +:1015C000430F00001660E5246403702390F916E0D1 +:1015D00030E20F30B10653077F02166043078002E6 +:1015E000166030940553077F807D430780807830F4 +:1015F000920553077F8070430780806BE524B40316 +:101600000990FF9EE054EFF0800790FF9EE054DFCA +:10161000F053077F8051E524B4030990FF9EE04416 +:1016200010F0800790FF9EE04420F053077F803742 +:10163000E524B4030990FF9EE054EFF0800790FF8B +:101640009EE054DFF0430780801DE524B403099039 +:10165000FF9EE04410F0800790FF9EE04420F0439E +:101660000780800353077F1222DAE0FCA3E0FD30FD +:10167000E00543072080035307DFEC30E305430711 +:101680004080035307BFEC30E0054307108003534D +:1016900007EFED30E40543070880035307F7ED300B +:1016A000E50543070480035307FBED30E6054307D8 +:1016B0000180035307FEED30E70543070280035323 +:1016C00007FD787E1222DCA3EFF01232847F002225 +:1016D00090FFFA7408F0A37416F090FFF97402F00A +:1016E0007B017AFA79CFE4FD12236190FACFE47599 +:1016F000F003121B1C121992E52330E702D2027B81 +:10170000007A00792490FACFE0F52DA3E0F52E7D44 +:101710000112269890FACFE4F0A3740BF07B007AC4 +:10172000007923752D00F52E7D01122698E52324DE +:101730008090FFF8F0E5236407601EE523640660EF +:1017400018E52364146012E5236441600CE523640A +:101750001A7046E52464027040E523B40716D2945B +:10176000D295D292D29390F916E04402F0A3E044CD +:1017700002F0801EE523B4411290F916E04406F011 +:10178000A3E04406F0D2B1D2B4800790F916E04449 +:1017900001F090F917E04401F0E5236442600CE5A4 +:1017A0002364436006E5236444702E90F916E0FF3D +:1017B000E523B444047E4080027E00EE24804F90F6 +:1017C000F916F0A3E0FFE523B444047E4080027ED6 +:1017D00000EE24804F90F917F090FACFE4F0A37454 +:1017E0000DF012199290FFF5E523F0E4F535F5338D +:1017F000F534F532121E34121CE0121E3B90F96AC9 +:10180000121BF390F96F121BF390FFFFE4F090FFAF +:1018100083E0E4F090FF817480F0A37484F090FF83 +:1018200080F0E4F523E523121D57F583E4F0E5236A +:10183000121D65F583E4F00523E523B407E7787A04 +:1018400076FE0876F090320AE493FF7878F6FDADE4 +:1018500007903217E493FF08F6FFED540FFD121DB9 +:10186000477484F0ED75F008A42447F582E434FF52 +:10187000F583EFF0C374F09F787BF674FE94001844 +:10188000121CD8CEC313CE13D8F9FFED121DA8EF4A +:10189000F0ED121DCEE4F523E52390320493FF789A +:1018A00078F6FDE52325E0240BF582E43432F58358 +:1018B000E49308F6ED30E75318E6540FF9121D478C +:1018C000121DB62447F582E434FF121CC8CEC313A0 +:1018D000CE13D8F9FFE9121DA8EFF0121CCFCEC32A +:1018E00013CE13D8F9121DBB2445F582E434FFF55D +:1018F00083EFF0E9121DCEE975F008A42446F582C5 +:10190000E434FFF5837480F00219677878E6540FA9 +:10191000F9121D9A121DB62407F582E434FF121C39 +:10192000C8CEC313CE13D8F9121DBB2401F582E42F +:1019300034FFF583EFF0121CCFCEC313CE13D8F9CA +:10194000121DBB2405F582E434FFF583EFF0E97541 +:10195000F008A42402F582E434FFF583E4F0E9758D +:10196000F008A42406F582E434FFF583E4F00523AF +:10197000E52364046003021891903209E493FF7830 +:1019800078F6121D98E4F090320893FFF6121D4588 +:10199000E4F090FFFD7405F0227B007A007923903B +:1019A000FACFE475F001121B3285F02EF52D7D0182 +:1019B000022698E709F608DFFA8046E709F208DF11 +:1019C000FA803E88828C83E709F0A3DFFA8032E355 +:1019D00009F608DFFA8078E309F208DFFA807088F8 +:1019E000828C83E309F0A3DFFA806489828A83E032 +:1019F000A3F608DFFA805889828A83E0A3F208DF21 +:101A0000FA804C80D280FA80C680D4806980F280CF +:101A100033801080A680EA809A80A880DA80E280F5 +:101A2000CA803389828A83ECFAE493A3C8C582C84A +:101A3000CCC583CCF0A3C8C582C8CCC583CCDFE9B4 +:101A4000DEE7800D89828A83E493A3F608DFF9EC50 +:101A5000FAA9F0EDFB2289828A83ECFAE0A3C8C5DB +:101A600082C8CCC583CCF0A3C8C582C8CCC583CC02 +:101A7000DFEADEE880DB89828A83E493A3F208DF71 +:101A8000F980CC88F0EF60010E4E60C388F0ED2441 +:101A900002B4040050B9F582EB2402B4040050AF44 +:101AA00023234582239019FC73BB010689828A8314 +:101AB000E0225002E722BBFE02E32289828A83E40D +:101AC0009322BB010CE58229F582E5833AF583E098 +:101AD000225006E92582F8E622BBFE06E92582F8B7 +:101AE000E222E58229F582E5833AF583E49322BB7D +:101AF000010689828A83F0225002F722BBFE01F39D +:101B000022F8BB010DE58229F582E5833AF583E8E9 +:101B1000F0225006E92582C8F622BBFE05E925829F +:101B2000C8F222C5F0F8A3E028F0C5F0F8E5821568 +:101B30008270021583E038F022A3F8E0C5F025F0AA +:101B4000F0E582158270021583E0C838F0E822BB08 +:101B50000110E58229F582E5833AF583E0F5F0A3EB +:101B6000E0225009E92582F886F008E622BBFE0A49 +:101B7000E92582F8E2F5F008E222E5832AF583E917 +:101B800093F5F0A3E99322BB010A89828A83F0E5E9 +:101B9000F0A3F0225006F709A7F01922BBFE06F3C6 +:101BA000E5F009F31922F8BB0111E58229F582E578 +:101BB000833AF583E8F0E5F0A3F0225009E92582A5 +:101BC000C8F608A6F022BBFE09E92582C8F2E5F0B6 +:101BD00008F222A42582F582E5F03583F58322E61A +:101BE000FB08E6FA08E6F922EBF608EAF608E9F659 +:101BF00022E0FBA3E0FAA3E0F922EBF0A3EAF0A3D2 +:101C0000E9F022D083D082F8E493701274019370CB +:101C10000DA3A393F8740193F5828883E47374028F +:101C2000936860EFA3A3A380DFAB36AA37A938E59A +:101C30004C121AE874012538F538E43537F537AB1E +:101C400036FAA9387411121AE874012538F538E407 +:101C50003537F53790FF06E0AB36AA37A938121AA8 +:101C6000E874012538F538E43537F537AB36FAA98D +:101C700038E4121AE8042538F538E43537F537AB7F +:101C800036FAA938E4121AE8042538F538E435376D +:101C9000F53790FF04E0AB36AA37A938121AE8747A +:101CA000012538F538E43537F53790FF05E0AB36D8 +:101CB000AA37A938121AE874012538F538E43537FF +:101CC000F53722F583E05408AB36AA37A93822F558 +:101CD00083EFF0FD7C00C3787BE69DF618E69CF66A +:101CE000E6FE08E67803227536017537F975387215 +:101CF00022E04404F074132FF582E434F9F583E014 +:101D00002290FABCE0FF7E00C390FAC0E09FF09002 +:101D1000FABFE09EF090FAB7EE8FF0121B1CEF2591 +:101D20004FF54FEE354EF54E227B017AFA79B4909D +:101D3000FAB7E0F52DA3E0F52E22787CE6FE08E662 +:101D40008E832404F582E43583F58322540F75F0E5 +:101D500008A42440F582E434FFF58322E54D75F0B4 +:101D600008A42448F582E434FF22E54D75F008A468 +:101D70002408F582E434FF2290FAB9E0FF24FC2223 +:101D800090FF00E0541F2290FABEE090FABAF022D1 +:101D90007533008F3490F96F121BEA9000022254C1 +:101DA0000F75F008A42400F582E434FFF583227552 +:101DB000F008A42441F582E434FFF583227480F016 +:101DC00008E6FFE975F008A42274B22522F582E442 +:101DD00034FAF5832275F008A42442F582E434FF36 +:101DE000F5837480F02290FF82E04408F02290FF97 +:101DF000FEE04403F090FFFCE054FDF0227867E63B +:101E000054FDF690FFFD7465F022121BCCE0FEA39A +:101E1000E0FF4E227B017AFA79B72290FF80E044FE +:101E200008F02290FF83E0547FF022E0FF90F96AEF +:101E3000021BEA90FFA4E04402F022753901753AD2 +:101E400009227B017AF9797222D3E53C9408E53BBB +:101E500094012290FABEE0FF90FABAF02290FFA41B +:101E6000E054EF2290FFB4E054EF2212104B788838 +:101E7000EFF6122AC71222FA8E8324091222A1E059 +:101E8000FD1222E890000A122302240A1222A1E085 +:101E900090000B121AFA1222FAF5828E83A3A3A3E2 +:101EA000E0F55312230624041222A1E0F5548F8298 +:101EB0008E83A3A3E0F555E553C41313135401789F +:101EC00088F6D394004006E55430E101067888E6B0 +:101ED0001222E790000CEF121AFA1222B5A3A3E027 +:101EE000FEA3E0FF53070C5306E6E55330E503433A +:101EF0000701E55420E50EE553547F7008E55320B3 +:101F0000E703430702E55330E303430710E553308B +:101F1000E203430720E55354036003430740E553BE +:101F200030E103430780E55330E403430601E55302 +:101F300030E603430608E55420E40EE553547F7071 +:101F400008E55320E7034306105307FB5306799037 +:101F50000005EE8FF0121B9FE55530E3125430FF61 +:101F6000C4540F1222E7900008EF121AFA800A12E6 +:101F700022E8900008E4121AFAE55554031222E709 +:101F8000900007EF121AFAE5555404FFC3139000AE +:101F900009121AFA900007121ABB70131222E8E90C +:101FA0002409F9E43AFA121AA2FFC313121AE8122A +:101FB000232724081222A1E0FE8D828C83E582244F +:101FC000071222A1E0FDEEED1222E7900003EE8F52 +:101FD000F0121B9F1232847D0AE4FF122FB402100C +:101FE000CE90FAE6E0B403067E007F4080047E00D7 +:101FF0007F0890FADAEEF0A3EFF0900005121ABB1A +:10200000FF7E0090FAD6EEF0A3EFF070037F082277 +:10201000900008121B48FF90FAD8E5F0F0A3EFF00B +:10202000AE02AF018E508F51740A2551F551E4353F +:1020300050F55090FADBE0FF14FE90FAD9E05EFE16 +:10204000C3EF9EFF90FADDF0C390FAD7E09F90FABD +:10205000D6E094005006A3E090FADDF01220A960CB +:1020600003E0FF22122E2B90FAD6E0FEA3E0FF4EF3 +:10207000602B90FADAE0FCA3E0FDD3EF9DEE9C40EC +:1020800007E090FADDF0800890FAD7E090FADDF0F2 +:102090001220A96003E0FF22122E2B80CA7B007A57 +:1020A000007952E4F52DF52E7D011226987F00224D +:1020B000AA50A9517B0190FAD8E0FCA3E0FD90FA68 +:1020C000DDE0F54A12296090FADCEFF022EF24AE51 +:1020D000605224FE602E24FE7003022169240660F3 +:1020E000030221B17871E654FBF690FFA5E0F522DA +:1020F000440FF0743390FA94F0E522A3F090FAB212 +:102100007401F0227872E654FBF690FFB5E0F522F8 +:10211000440FF0744390FA96F0E522A3F090FAB3DE +:102120007401F02290FAA0E0A320E5030221B1900F +:10213000FFA6E090FACDF0A3F090FACDE0FF540FA7 +:10214000FE601090FFA612230D90FFA6E090FACD3E +:10215000F080E690FACEE0FF7434FE122D85EF7029 +:102160005790FACEE0FF743490FA98F0EFA3F02283 +:1021700090FAAAE0A330E54090FFB6E090FACDF0E7 +:10218000A3F090FACDE0FF540FFE601090FFB6125E +:10219000230D90FFB6E090FACDF080E690FACEE005 +:1021A000FF7444FE122D85EF700E90FACEE0FF749E +:1021B0004490FA9AF0EFA3F022C0E0C0F0C083C0D0 +:1021C00082C0D075D000C000C001C002C003C004EE +:1021D000C005C006C00790FF92E0FF90FACCF090D7 +:1021E000FF92E4F0EF121BFC22692622692E220CDA +:1021F00030220C32221A38222C3A225E3E224944E6 +:10220000223E462254502254522254542254560004 +:1022100000226E90FACCE0FD7C007F0112115E80FE +:10222000627C007D017F0312115E90FFFEE044207E +:10223000F080507C007D017F0212115E90FFFEE075 +:102240004440F0803E7C007D017F0512115E8033AA +:102250007C007D017F0612115E802890FACCE0FFA1 +:102260001220C6801E7C007D017F0412115E801347 +:1022700012284E800E90FACCE02400FFE434FFFEDA +:10228000122D85D007D006D005D004D003D002D0BF +:1022900001D000D0D0D082D083D0F0D0E032787C92 +:1022A000E6FE08E624048E83F582E43583F5832276 +:1022B00074132524F582E434F9F583227880E6FE50 +:1022C00008E6F5828E83227880E6FE08E6AA06F804 +:1022D000AC027D017BFF7A3279567E007F0A021ABA +:1022E0007C7880E6FC08E6F5828C83A3A322FF902D +:1022F000F96F021BEA90F96A121BEA900004021AB5 +:10230000BB787EE6FE08E6FF22ED121AFA8F828E77 +:1023100083E58222EFF090FACEE0540F4EFEF0EF0C +:1023200054F04EF0227880E6FC08E68C8322787E1A +:10233000E6FC08E6FD8C8322A607E6246EF8E6227A +:10234000787EE6FA08E6FB2208E6FE08E68E83229F +:1023500026F618EE36F622EF240BF582E43EF583DE +:10236000228B828A83E582228B258A2689278D28E3 +:1023700090FAD2E4F0A37402F07B017AFA79D1905A +:10238000FAD2E0F52DA3E0F52E7D0112269890FA01 +:10239000D1E065286046A3E0FFA3E0A3CFF0A3EF60 +:1023A000F01223F090FAD1E0FF90FAD4E48FF0120B +:1023B0001B1C1223F090FAD4E0FFA3E090FAD2CFD6 +:1023C000F0A3EFF090FAD1E0A375F000121B1C907F +:1023D000FAD2E475F004121B1C02237290FAD3E0C7 +:1023E0002401FF90FAD2E03400AB25AA26A9278F5A +:1023F000F0121B807F00227B017AFA79D190FAD209 +:10240000E475F001121B1C85F02EF52D7D010226CE +:10241000988F62122AC71222FA8E83240B1222A1ED +:10242000E054FBF04402F0081222DCE0A330E50C9B +:10243000122306240B1222A1E04401F0787CE6FE70 +:1024400008E6FFF5828E83E054B8FDF0E56224FED5 +:102450004420FC4DF0E58224041222A1E054B8F09F +:102460004CF08F828E83A37403F018E6FE08E6FF1B +:102470008E8324051222A1C083C082E0FD749925B9 +:1024800062F582E434FAF583E054FC4403FCED4C3D +:10249000D082D083F08F828E83E04480F0E5822466 +:1024A000041222A1E04480F0123284746E2562F896 +:1024B000740446F67F002212104B7F0212126178DC +:1024C00067E64402F6D2B0D2B190F916E030E707E1 +:1024D00090FF9EE4F08036D2B390FFA4E090FA7EA5 +:1024E000F090FFB4E090FA7FF090FFA2E090FA7CC9 +:1024F000F090FFB2E090FA7DF090FFA47430F0907D +:10250000FFB4F090FFA27440F090FFB2F090FAE7B1 +:10251000E5A8F075A88190FF92E06004E4F080F6F1 +:1025200090FFFD743AF043870100000090FA7EE0CE +:1025300090FFA4F090FA7FE090FFB4F090FA7CE076 +:1025400090FFA2F090FA7DE090FFB2F090F918E0D1 +:102550006002C2B390FAE7E0F5A80210CE8B5C8A65 +:102560005D895E122E0D90FAC3121BF3AA5DA95E5F +:1025700090FAC6121BF390FAC7E475F00A121B1CFE +:1025800090FAC6121BEAE92401F9E43AFA90FAC972 +:10259000121BF3AB5CAA5DA95E122E19E0FFC313F8 +:1025A000F0E47882F690FAC1E0FF7882E6C39F50AB +:1025B0004A90FAC3122DEEFF7883F690FAC6122DD8 +:1025C000EEFEF45FFF7883F6122DEB5E4FFF78830B +:1025D000F6122DF475F002121B1C90FAC7E475F088 +:1025E00002121B1CAB5CAA5DA95E900004121ABB10 +:1025F00030E403122E0378820680AAE490FAC2F037 +:10260000228B568A57895890FAC27406F0E490FAE1 +:10261000C1F0121AA2246E6026147070122DDA60B6 +:1026200009243070121225568062122E24121FDAED +:1026300090FAC2EFF0805590FAC27481F0804D128A +:102640002DDA60092430703E122D30803FE5582489 +:1026500003F9E43557FA7B01C003C002C001122E12 +:1026600024900005121ABBFD900008121B48F52E9D +:1026700085F02DD001D002D00312269890FAC1EF38 +:10268000F0E4A3F0800690FAC27481F090FAC2E000 +:10269000122E24900002121AFA90FAC1E0FF228B47 +:1026A000298A2A892B8D2CE52C7003AF2C22122E1F +:1026B000537016122E72E52D90FFF1F01231D850A2 +:1026C000F2122725400B7F0022122E72122725506E +:1026D000F890FFF374A1F0E52CB4010790FFF0E04F +:1026E0004402F090FFF1E4F0F52FE52C14FFE52F04 +:1026F000C39F502A1231C14003AF2F22C3E52C954E +:102700002FFFBF020790FFF0E04402F0122E650594 +:102710002F7401252BF52BE4352AF52A80CC1231B4 +:10272000C140037F1822122E65AF2C2290FFF1E5E5 +:102730002EF00231D812104B788412233130E10888 +:102740007F131231A90227BC7884E6F924131222E0 +:10275000ADE0FF30E7405403601EE9B4030D90FF85 +:102760009EE054FEF0E04404F0804690FF9EE0546A +:10277000FDF0E04408F08039E9B4030D90FF9EE0DD +:1027800054FBF0E04401F0802890FF9EE054F7F005 +:10279000E04402F0801BEF54036014E9B403099095 +:1027A000FFA4E054DFF0800790FFB4E054DFF0C2F4 +:1027B000B390F918E004F0AF011222EEFD122FE5FC +:1027C0001231A90210CE75A840787FE4F6D8FD75C5 +:1027D000818B02280902318CE493A3F8E493A3408F +:1027E00003F68001F208DFF48029E493A3F854078C +:1027F000240CC8C333C4540F4420C8834004F45687 +:10280000800146F6DFE4800B0102040810204080BE +:10281000902BA9E47E019360BCA3FF543F30E509EF +:10282000541FFEE493A360010ECF54C025E060A8BE +:1028300040B8E493A3FAE493A3F8E493A3C8C58251 +:10284000C8CAC583CAF0A3C8C582C8CAC583CADFBF +:10285000E9DEE780BEE4F522121DC2E0B4040DE516 +:10286000222403FF123013121DC2E4F00522E522D8 +:10287000C3940240E3E4F52275F002E52290FA9455 +:10288000121E03602C122D85EF605275F002E522B6 +:1028900090FA94121BCCE4F0A3F075F00AE52290B4 +:1028A000FAA0121BCCE0A330E633121DC27404F070 +:1028B0002275F002E52290FA98121E036016122D7E +:1028C00085EF601975F002E52290FA98121BCCE4AE +:1028D000F0A3F0220522E522C39402409B22E4FFEC +:1028E00090FF83E0540FFEEFC39E501774F02FF556 +:1028F00082E434FEF583E0121CC1121AE80F121CA8 +:10290000B080DDEFFDC3E53A9DF53AE5399400F579 +:1029100039D3E53A9400E53994004006E490FF830A +:10292000F022121DDF121E34121E26121AA2246E6D +:10293000601E14601B248E702D900001121ABBFFC4 +:1029400024FC600304701FEFFD7C007F0D02115E0C +:10295000121E3B1225FA121D89121ABB60030232A5 +:102960007AE4FF12326E228B458A4689478C488D65 +:1029700049D200122E537016122E72E54890FFF1C4 +:10298000F01231D850F21229D5400B7F1822122EA6 +:10299000721229D550F8E4F54BE54A14FFE54BC314 +:1029A0009F50171229C540037F1822054B7401253B +:1029B00047F547E43546F54680DF90FFF0E04401F7 +:1029C000F01229C540037F18227F0022AB45AA469A +:1029D000A947121AA290FFF1F00231D890FFF1E559 +:1029E00049F00231D87B017AFA79CFE4FD122361F4 +:1029F00090FACFE475F009121B1C7B007A00792352 +:102A000090FACFE475F001121B3285F02EF52D7D82 +:102A10000112269890FFF7E523122A3990FFF6E578 +:102A200023F090FACFE4F0A37406122A39E523309C +:102A3000E00790FFFC7494F02290FFFC7490F02269 +:102A4000F07B007A00792390FACFE475F001121B35 +:102A50003285F02EF52D7D0102269890FF9374812A +:102A6000F090FFFFE0600690FFFC7410F090FF9183 +:102A7000E04490F0E490F916F0A3F0122B3912160E +:102A8000C91230697E077FD012122A7E0F7FA012F2 +:102A90001244E47877F67877E6FFC39406500B7417 +:102AA0006E2FF8E4F678770680EC7F031230B29050 +:102AB000F916E020E4057F041230B290FF9BE4F0A9 +:102AC00090FF9AF090FFE8E0541FF0D2A82215651D +:102AD000A865A6073008051211AE80F8D208A865CF +:102AE000E6FFB4030F787C76FF0876E00876FF08EF +:102AF00076A0800D787C76FF0876E20876FF08766F +:102B0000B0788076FA08769EEF24FD75F00AA4AEC0 +:102B1000F01223497B017AFF79487868121BE1A8FB +:102B200065E624FD75F008A4FFAEF0786A1223492B +:102B30007908786B121BE1786DEF12234905652245 +:102B400090FFF0E054ABF0E04420F090FAE674021D +:102B5000F07B017AFA79CFE4F52DF52E7D0112266E +:102B6000987E0090FAE4EEF0A3EFF064017010900C +:102B7000FACFE0B4520990F916E054EFF0802990B2 +:102B8000FAE4E07004A3E06401701090FACFE0B4BE +:102B9000100990F916E04410F0800D90FAE67403E5 +:102BA000F090F916E054EFF090FFF0E04420F022AE +:102BB000036801FF48036B01FF080266000044FA46 +:102BC000980000000044FA940000000042FAB200AD +:102BD0000042FA7E000042FA7C000042F96DFFFFDD +:102BE00042FA7A000041F966FF41F91C1941F915D2 +:102BF0000043F9190A320241F9682041F96920417C +:102C0000F9650041F9670044F8000000000042F94E +:102C100016000041F9180001200041F804000012DC +:102C2000104B788AEFF6122AC71222EE30E029788C +:102C30007C1222B7E0547FF0786B121BD890000210 +:102C4000121ABB30E709900002E4121AFA80E97800 +:102C50007C1222B7E04480F01222EE30E11E1222F4 +:102C600097E0547FF01232197868121BD890000256 +:102C70007480121AFA122297E04480F0123284E42F +:102C8000FF1231A90210CE12104B7885EFF61231E7 +:102C9000501231A97885E6FF24131222ADE0FE30F0 +:102CA000E716EFB4030990FF9EE054FAF0802290FB +:102CB000FF9EE054F5F08019EE54036014EFB40366 +:102CC0000990FFA4E04420F0800790FFB4E0442086 +:102CD000F090F918E014F0E07002D2B30210CE12B6 +:102CE0001E1CE53A64097004E53964016048C3E5D7 +:102CF0003A9408E539940040117F08EFE53A9408CA +:102D0000F53AE5399400F5398005AF3A121E34E4FE +:102D1000FEEEC39F5019121CC1121AA2FD74F82EA8 +:102D2000F582E434FEF583EDF00E121CB080E2EF84 +:102D3000547F90FF81F0228B598A5A895B122E1999 +:102D40007005A37408F022AB59AA5AA95B122E0D84 +:102D500090FAC9121BF3E55B2403F9E4355AFA90A3 +:102D6000FAC3121BF3E490FAC2F0788BF690FAC122 +:102D7000E0FF788BE6C39F5012122DEBFF122DF46B +:102D8000122E07788B06122E0380E222AD07AC06C6 +:102D900090320AE493FF7874F6540F121DA8E008ED +:102DA000760008F618121CD9C333CE33CED8F9FFFB +:102DB0007875EEF608EFF6EE44F818F6EF08F690A0 +:102DC000FF7AE020E7037F00227875E6FE08E6F54B +:102DD000828E83ECF0A3EDF090FF7A7402F07F0115 +:102DE00022AB56AA57A958900003121ABB54F024DC +:102DF000A02290FAC9121BEA021AA290FAC3121B6F +:102E0000EAEF121AE890FACAE42290FAC4E475F0E4 +:102E100001021B1C900008121B48AAF0F97B01223A +:102E2000900005121ABB90FAC1F022AB56AA57A91E +:102E3000582290FADDE0FF7E00C390FAD7E09FF0C1 +:102E400090FAD6E09EF090FAD8EE8FF0121B1CEFAD +:102E50002551F551EE3550F5502290FFF0E054FE2B +:102E6000F0E054FDF090FAE6E064032290FFF2E017 +:102E7000AB29AA2AA92B021AE890FFF374A0F0222A +:102E80008F64ED700FE564B403057F010231EF7FBD +:102E9000020231EFAF64122AC7746E2564F8E6307F +:102EA000E20BD209121D33E0547FF08002C209E523 +:102EB00064B403077F811231EF80057F821231EF06 +:102EC000300907121D33E04480F0123284221210C0 +:102ED0004B90FFFDE04460F0D20190FFFCE0440223 +:102EE000F090FF00E030E71390FF83E04480F04370 +:102EF000358090FFFCE04401F0800D121DDF53355A +:102F00007F90FFFCE054FEF090FF81E04480F012DF +:102F100002DE121DE70210CE12104B7889EFF6D2B6 +:102F200000122AC790F96A121BEAE92403F9E43A6D +:102F3000FAC0027880E6FE08E6AA06F8AC027D0137 +:102F4000D0021222D31232847889E6FF121387123C +:102F500031A90210CE8F63122AC7787C1222B7E003 +:102F6000543FF0E58224041222A1E0543FF01223E2 +:102F700041240B1222A1E054F8F0123284746E2521 +:102F800063F874FB56F67F002212104B122AC71208 +:102F900022FA240612229FE0FD1222E8900003127A +:102FA000230224051222A1E0900004121AFA123220 +:102FB000847D02E4FF122FB40210CEAE05121D8EE6 +:102FC000EF121AFA0E0E0EEED3953CE4953B40023A +:102FD000AE3CEED3940874809481400A7E03900046 +:102FE000027402121AFAAF0612326E22AE07ED54C4 +:102FF00003640160037F1022ED547CC394045003EA +:103000007F0B22746E2EF8740246F674992EF582A8 +:10301000E434FAF583EDF07F0022BF03067CFF7DE8 +:10302000E080047CFF7DE28D828C83E04480F0E5CB +:103030008224041222A1E04480F0746E2FF87404FC +:1030400046F67F002212104BE53A64097004E53918 +:103050006401601690FF83E0540FFFC3E53A9FE5DB +:1030600039940040051228D7800312327A0210CE1C +:1030700090FFFCE020E71FC2AF7DFFAC051DEC60B8 +:10308000157E047F00EF1FAA0670011E4A60EC90B7 +:10309000FF92E4F080EF2212104B7866E6FE08E61D +:1030A000FF30E01230E10F90FFFCE04420F07F049D +:1030B000121261121DF60210CE8F23C208122AC707 +:1030C0001222C0787E122342240B1222A1E054F86F +:1030D000F0123284AF23121387228E5F8F60E56077 +:1030E0001560AE5F7002155FD39400EE9400400946 +:1030F0007E077FD012102480E52211DC2EC724B079 +:1031000032603090303E316F2F82272E2C8031126A +:1031100031311E642F112C180E12104B7886122399 +:103120003120E1077F121231A9800A7886E6FF126A +:10313000240A1231A90210CE12104B7887122331C3 +:1031400020E2077F111231A9800A7887E6FF122F4B +:103150004E1231A90210CE8F61122F4EAF61122A8A +:10316000C71222C0123284746E2561F874FD56F6BF +:10317000AF611213872212104BE53A64097004E51F +:103180003964016005122CD88006121E14121E1C10 +:103190000210CE122A5412130390F804E0FF6005C7 +:1031A0007D011212A01229DE12133F1211BC80E31E +:1031B000121D8EEF121AFAE4F533F534EF600302B4 +:1031C000327AE4FF12326E2290FFF0E0FF54A060EA +:1031D000F7EF30E50890FFF04420F0C322D32290AF +:1031E000FFF0E0FF542860F7EF30E50890FFF0446F +:1031F00020F0C322D322EF30E708121D45E054DF50 +:10320000F022EF121D98E054DFF022810182028348 +:10321000038740004000400040004000400008009C +:10322000787E1222B7A3A3E0FF30E706547FF04474 +:1032300080F022853B39853C3A90FF82E054F7F0DC +:10324000A3E0547FF022E4FEEE90320493B507022F +:10325000D3220EBE07F2C32200081828380181903D +:103260000A02000011130012104B7F021210DA1232 +:103270001DF60210CE7539008F3A121CE0122CD8C0 +:0E32800022121E1C121DDF121E1422C2082272 +:00000001FF +//************************************************************** +//* Edgeport Binary Image (for TI based products) +//* Generated by TIBin2C v2.00 (watchport) +//* Copyright (C) 2001 Inside Out Networks, All rights reserved. +//************************************************************** -- cgit v1.2.3 From 7f127d5ed0da66053482a3e18014c439da3c41d1 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Date: Sat, 5 Jul 2008 15:28:30 +0530 Subject: dsp56k: use request_firmware Signed-off-by: Jaswinder Singh Signed-off-by: David Woodhouse --- drivers/char/dsp56k.c | 84 +++++++++++++------------------- firmware/Makefile | 1 + firmware/WHENCE | 12 +++++ firmware/dsp56k/bootstrap.asm | 98 ++++++++++++++++++++++++++++++++++++++ firmware/dsp56k/bootstrap.bin.ihex | 26 ++++++++++ 5 files changed, 170 insertions(+), 51 deletions(-) create mode 100644 firmware/dsp56k/bootstrap.asm create mode 100644 firmware/dsp56k/bootstrap.bin.ihex diff --git a/drivers/char/dsp56k.c b/drivers/char/dsp56k.c index a69c65283260..d716c78f0ff4 100644 --- a/drivers/char/dsp56k.c +++ b/drivers/char/dsp56k.c @@ -33,6 +33,8 @@ #include #include #include +#include +#include #include #include @@ -92,49 +94,6 @@ } \ } -/* DSP56001 bootstrap code */ -static char bootstrap[] = { - 0x0c, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x60, 0xf4, 0x00, 0x00, 0x00, 0x4f, 0x61, 0xf4, - 0x00, 0x00, 0x7e, 0xa9, 0x06, 0x2e, 0x80, 0x00, 0x00, 0x47, - 0x07, 0xd8, 0x84, 0x07, 0x59, 0x84, 0x08, 0xf4, 0xa8, 0x00, - 0x00, 0x04, 0x08, 0xf4, 0xbf, 0x00, 0x0c, 0x00, 0x00, 0xfe, - 0xb8, 0x0a, 0xf0, 0x80, 0x00, 0x7e, 0xa9, 0x08, 0xf4, 0xa0, - 0x00, 0x00, 0x01, 0x08, 0xf4, 0xbe, 0x00, 0x00, 0x00, 0x0a, - 0xa9, 0x80, 0x00, 0x7e, 0xad, 0x08, 0x4e, 0x2b, 0x44, 0xf4, - 0x00, 0x00, 0x00, 0x03, 0x44, 0xf4, 0x45, 0x00, 0x00, 0x01, - 0x0e, 0xa0, 0x00, 0x0a, 0xa9, 0x80, 0x00, 0x7e, 0xb5, 0x08, - 0x50, 0x2b, 0x0a, 0xa9, 0x80, 0x00, 0x7e, 0xb8, 0x08, 0x46, - 0x2b, 0x44, 0xf4, 0x45, 0x00, 0x00, 0x02, 0x0a, 0xf0, 0xaa, - 0x00, 0x7e, 0xc9, 0x20, 0x00, 0x45, 0x0a, 0xf0, 0xaa, 0x00, - 0x7e, 0xd0, 0x06, 0xc6, 0x00, 0x00, 0x7e, 0xc6, 0x0a, 0xa9, - 0x80, 0x00, 0x7e, 0xc4, 0x08, 0x58, 0x6b, 0x0a, 0xf0, 0x80, - 0x00, 0x7e, 0xad, 0x06, 0xc6, 0x00, 0x00, 0x7e, 0xcd, 0x0a, - 0xa9, 0x80, 0x00, 0x7e, 0xcb, 0x08, 0x58, 0xab, 0x0a, 0xf0, - 0x80, 0x00, 0x7e, 0xad, 0x06, 0xc6, 0x00, 0x00, 0x7e, 0xd4, - 0x0a, 0xa9, 0x80, 0x00, 0x7e, 0xd2, 0x08, 0x58, 0xeb, 0x0a, - 0xf0, 0x80, 0x00, 0x7e, 0xad}; -static int sizeof_bootstrap = 375; - - static struct dsp56k_device { unsigned long in_use; long maxio, timeout; @@ -164,18 +123,40 @@ static int dsp56k_reset(void) static int dsp56k_upload(u_char __user *bin, int len) { + struct platform_device *pdev; + const struct firmware *fw; + const char fw_name[] = "dsp56k/bootstrap.bin"; + int err; int i; - u_char *p; - + dsp56k_reset(); - - p = bootstrap; - for (i = 0; i < sizeof_bootstrap/3; i++) { + + pdev = platform_device_register_simple("dsp56k", 0, NULL, 0); + if (IS_ERR(pdev)) { + printk(KERN_ERR "Failed to register device for \"%s\"\n", + fw_name); + return -EINVAL; + } + err = request_firmware(&fw, fw_name, &pdev->dev); + platform_device_unregister(pdev); + if (err) { + printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + fw_name, err); + return err; + } + if (fw->size % 3) { + printk(KERN_ERR "Bogus length %d in image \"%s\"\n", + fw->size, fw_name); + release_firmware(fw); + return -EINVAL; + } + for (i = 0; i < fw->size; i = i + 3) { /* tx_wait(10); */ - dsp56k_host_interface.data.b[1] = *p++; - dsp56k_host_interface.data.b[2] = *p++; - dsp56k_host_interface.data.b[3] = *p++; + dsp56k_host_interface.data.b[1] = fw->data[i]; + dsp56k_host_interface.data.b[2] = fw->data[i + 1]; + dsp56k_host_interface.data.b[3] = fw->data[i + 2]; } + release_firmware(fw); for (; i < 512; i++) { /* tx_wait(10); */ dsp56k_host_interface.data.b[1] = 0; @@ -534,3 +515,4 @@ static void __exit dsp56k_cleanup_driver(void) module_exit(dsp56k_cleanup_driver); MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("dsp56k/bootstrap.bin"); diff --git a/firmware/Makefile b/firmware/Makefile index a162b2928fbd..782c499a3738 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -20,6 +20,7 @@ fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE)) # accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all). # But be aware that the config file might not be included at all. +fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin diff --git a/firmware/WHENCE b/firmware/WHENCE index 79e62e2fea5d..5c1dc159639a 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -309,3 +309,15 @@ Licence: Found in hex form in kernel source. -------------------------------------------------------------------------- + +Driver: ATARI_DSP56K - Atari DSP56k support + +File: dsp56k/bootstrap.bin +Source: dsp56k/bootstrap.asm + +Licence: GPLv2 or later + +DSP56001 assembler, possibly buildable with a56 from +http://www.zdomain.com/a56.html + +-------------------------------------------------------------------------- diff --git a/firmware/dsp56k/bootstrap.asm b/firmware/dsp56k/bootstrap.asm new file mode 100644 index 000000000000..10d891929cd3 --- /dev/null +++ b/firmware/dsp56k/bootstrap.asm @@ -0,0 +1,98 @@ +; Author: Frederik Noring +; +; This file is subject to the terms and conditions of the GNU General Public +; License. See the file COPYING in the main directory of this archive +; for more details. + +; DSP56k loader + +; Host Interface +M_BCR EQU $FFFE ; Port A Bus Control Register +M_PBC EQU $FFE0 ; Port B Control Register +M_PBDDR EQU $FFE2 ; Port B Data Direction Register +M_PBD EQU $FFE4 ; Port B Data Register +M_PCC EQU $FFE1 ; Port C Control Register +M_PCDDR EQU $FFE3 ; Port C Data Direction Register +M_PCD EQU $FFE5 ; Port C Data Register + +M_HCR EQU $FFE8 ; Host Control Register +M_HSR EQU $FFE9 ; Host Status Register +M_HRX EQU $FFEB ; Host Receive Data Register +M_HTX EQU $FFEB ; Host Transmit Data Register + +; SSI, Synchronous Serial Interface +M_RX EQU $FFEF ; Serial Receive Data Register +M_TX EQU $FFEF ; Serial Transmit Data Register +M_CRA EQU $FFEC ; SSI Control Register A +M_CRB EQU $FFED ; SSI Control Register B +M_SR EQU $FFEE ; SSI Status Register +M_TSR EQU $FFEE ; SSI Time Slot Register + +; Exception Processing +M_IPR EQU $FFFF ; Interrupt Priority Register + + org P:$0 +start jmp <$40 + + org P:$40 +; ; Zero 16384 DSP X and Y words +; clr A #0,r0 +; clr B #0,r4 +; do #64,<_block1 +; rep #256 +; move A,X:(r0)+ B,Y:(r4)+ +;_block1 ; Zero (32768-512) Program words +; clr A #512,r0 +; do #126,<_block2 +; rep #256 +; move A,P:(r0)+ +;_block2 + + ; Copy DSP program control + move #real,r0 + move #upload,r1 + do #upload_end-upload,<_copy + move P:(r0)+,x0 + move x0,P:(r1)+ +_copy movep #>4,X:<$c00,X:<1,X:<0,X:<3,x0 + cmp x0,A #>1,x0 + jeq <$0 +_get_address + jclr #0,X:<2,x0 + jeq load_X + cmp x0,A + jeq load_Y + +load_P do y0,_load + jclr #0,X:< Date: Sat, 5 Jul 2008 18:05:22 +0530 Subject: firmware: convert sb16_csp driver to use firmware loader exclusively Signed-off-by: Jaswinder Singh Signed-off-by: David Woodhouse --- firmware/Makefile | 4 + firmware/WHENCE | 18 + firmware/sb16/alaw_main.csp.ihex | 87 +++ firmware/sb16/ima_adpcm_capture.csp.ihex | 121 ++++ firmware/sb16/ima_adpcm_init.csp.ihex | 70 +++ firmware/sb16/ima_adpcm_playback.csp.ihex | 122 ++++ firmware/sb16/mulaw_main.csp.ihex | 84 +++ sound/isa/Kconfig | 9 - sound/isa/sb/sb16_csp.c | 22 - sound/isa/sb/sb16_csp_codecs.h | 949 ------------------------------ 10 files changed, 506 insertions(+), 980 deletions(-) create mode 100644 firmware/sb16/alaw_main.csp.ihex create mode 100644 firmware/sb16/ima_adpcm_capture.csp.ihex create mode 100644 firmware/sb16/ima_adpcm_init.csp.ihex create mode 100644 firmware/sb16/ima_adpcm_playback.csp.ihex create mode 100644 firmware/sb16/mulaw_main.csp.ihex delete mode 100644 sound/isa/sb/sb16_csp_codecs.h diff --git a/firmware/Makefile b/firmware/Makefile index 782c499a3738..10028ace2de4 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -28,6 +28,10 @@ fw-shipped-$(CONFIG_SMCTR) += tr_smctr.bin fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \ ess/maestro3_assp_minisrc.fw +fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \ + sb16/ima_adpcm_init.csp \ + sb16/ima_adpcm_playback.csp \ + sb16/ima_adpcm_capture.csp fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \ yamaha/ds1e_ctrl.fw fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \ diff --git a/firmware/WHENCE b/firmware/WHENCE index 5c1dc159639a..66c51b275e9e 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -321,3 +321,21 @@ DSP56001 assembler, possibly buildable with a56 from http://www.zdomain.com/a56.html -------------------------------------------------------------------------- + +Driver: SND_SB16_CSP - Sound Blaster 16/AWE CSP support + +File: sb16/mulaw_main.csp +File: sb16/alaw_main.csp +File: sb16/ima_adpcm_init.csp +File: sb16/ima_adpcm_playback.csp +File: sb16/ima_adpcm_capture.csp + +Licence: Allegedly GPLv2+, but no source visible. Marked: +/* + * Copyright (c) 1994 Creative Technology Ltd. + * Microcode files for SB16 Advanced Signal Processor + */ + +Found in hex form in kernel source. + +-------------------------------------------------------------------------- diff --git a/firmware/sb16/alaw_main.csp.ihex b/firmware/sb16/alaw_main.csp.ihex new file mode 100644 index 000000000000..04502707c42a --- /dev/null +++ b/firmware/sb16/alaw_main.csp.ihex @@ -0,0 +1,87 @@ +:10000000001000440800004400B1004400610044B6 +:10001000085000440DF261A8440404190000404552 +:10002000404939AC5555718B500563800000063945 +:10003000FF2E2149FF0FD4492001090E2000718BAA +:10004000A801A8808801A880A8000080D200718B38 +:100050008800A880A804B3802007B3808803B180FB +:10006000C000095CC2010082A100718BCD0004199F +:100070002120718BCF0004190000B180C200041947 +:100080000040001408400424000034490C4000449F +:1000900044040439000040453200095C00000C397A +:1000A00000004045404009EFFF2009CF000463A154 +:1000B000500333800004A38000FFC28B00D004549F +:1000C00004E000C4200380C03000008800007A0AE9 +:1000D000D001008200600044C0000099006000442C +:1000E00000FFC28B20000080000D428B083200C44C +:1000F000000E428B00A200C4001E428B0CB200C452 +:10010000008E428B006200C4009E428B085200C4E5 +:1001100000BE428B085200C40004428B047200C42B +:100120000024428B00D200C40055428B006000C402 +:1001300000004045200179800030428B088200C4D5 +:10014000000040450000718B4001008000600044C9 +:10015000FF00E2AB00B200C40FF2A8A82000B188F3 +:10016000000041024DF20039C001008200600044ED +:100170000DF2A3A84DF2003900600044FF00E2AB8D +:1001800020000088000061024DF204190060004464 +:10019000FF00E2ABA0000088000061104DF20419DE +:1001A00000600044FF20E2AB60000088000071C0E6 +:1001B0004DF20419006000440000798000E20084E0 +:1001C0000303044904C20054006004640060004456 +:1001D0000000638000000619030004490060004429 +:1001E00020016380000006190020E28B0CF20084DD +:1001F000BE00518BC020003908010044EC00518B37 +:10020000C02000390002E28B042100843F00518BA2 +:10021000C2200039001100443D00518BC22000393A +:10022000E500718BCD0000390000B180C9200419B0 +:10023000CB200419C1200419C32004191000718BAC +:10024000C7200419DE00518BCF0000390001B180B6 +:10025000C4200419C6200419C8200419CA2004198E +:100260002000718BCC200419030004490060004475 +:10027000090461A8C10004190B0461A8CA0004198B +:10028000046000D40D00610A9040098F0001004510 +:100290000F00610A0040098F000100458200092E0D +:1002A000804009CF02006122432561224033008053 +:1002B0000848004420B1495C9200094E0203092E0F +:1002C0000000A302C00071C02000EB800004C28BBC +:1002D0002004618000047A02C00000820CC3084937 +:1002E000B001F3800000103920000C890C88084907 +:1002F0000300A81800001039BDFF628B20010080A8 +:10030000000063CB00007A024000015B2000008007 +:1003100000004ACB2000138020007A80E02100C03A +:10032000080008491041098EAEAE628B00046122BC +:1003300000030045220133802001A30200007A80DF +:10034000C00000820720400A08A3008440210080EA +:1003500040059310C7200039000040450720400A9F +:100360000C930084080000820C246150400100803E +:10037000C7200039000040450004638000000639B2 +:100380004201090E0220610A000100450C20600AAA +:1003900000C300840004B180000006390C6104D45D +:1003A000002471C0203333C0E001A38222037A020B +:1003B000C301A3822001338000007A80C201B350C0 +:1003C000CC20003900007180000800440C20600A35 +:1003D00000F300840004B180000006390C6104D4ED +:1003E000000071C000009310CC20003900080044C8 +:1003F000CC200039002000C0003071C0000800444B +:1004000020010080AEAE628B20013380000083802B +:1004100020007A8020A1495C8200096E804A098E02 +:10042000E001B3822004A38000007ACB2804EA1004 +:100430000C047A107000C08B00001039900300800B +:100440004000215B900061800C8A084900001C1963 +:100450004000085B08000849200200800300A8183B +:1004600000001419400021CB000041020000EB8085 +:10047000F2010082402133020820610AC4000419FD +:10048000C70000990200610A0C0A04140100610A05 +:100490000300480A00580454C30004190C580044CF +:1004A0000800C80A0C580454C80004190A00610A5C +:1004B0000900480A00C80454C90004190CC80044C3 +:1004C0000B00C80A0CC80454CB0004190400610ACC +:1004D0000600480A00D80454C60004190CD8004489 +:1004E0000500C80A0CD80454C50004190700610AA5 +:1004F0000C00480A000A0454CC0004190C0A0044F9 +:100500000E00C80A0C0A0454CE000419000040452D +:080510002010718B0842060067 +:00000001FF +/* + * Copyright (c) 1994 Creative Technology Ltd. + * Microcode files for SB16 Advanced Signal Processor + */ diff --git a/firmware/sb16/ima_adpcm_capture.csp.ihex b/firmware/sb16/ima_adpcm_capture.csp.ihex new file mode 100644 index 000000000000..9a50a58564ae --- /dev/null +++ b/firmware/sb16/ima_adpcm_capture.csp.ihex @@ -0,0 +1,121 @@ +:1000000000100044080000440070004408D0004480 +:1000100000F000440DF261A84404041900004045BA +:100020000004638000000639FF2E2149FF0CD449EB +:10003000404939AC5555718B5001B1800000718B2E +:10004000C2300419C0A00419C2A004198900718B20 +:10005000C83004197100718BCD000419CF00041948 +:100060008000718BCB2004192000718BC4200419EF +:100070004700518BC020003900006380C1A00419E3 +:100080009300014FCD300009CF3000090C4000141F +:1000900000600014000461A8020461A80C6004243C +:1000A000000034490850004444040439000040452D +:1000B0000830610A05B0E8180CC00454C8300419AF +:1000C000090400A80B0400A800004045090461A829 +:1000D000C10004190B0461A8CA0004190D00610ACB +:1000E000000100450F00610A0040098F0001004532 +:1000F000404009EFFF2009CF000463A15003338083 +:100100000004A38000FFC28B0C120454081200C428 +:10011000200380C03000008800007A0AD0010082ED +:1001200004500044C00000990450004400FFC28BFA +:1001300020000080000D428B044200C4000E428B60 +:10014000085200C4001E428B00E200C4008E428BA5 +:1001500008D200C4009E428B04F200C400BE428B51 +:1001600004F200C40004428B041100C40024428B3A +:100170000C6100C40055428B045000C4003F428B08 +:100180000C0100C400004045200179800030428B02 +:10019000046200C4000040450000718B40010080F3 +:1001A00004500044FF00E2AB08C200C40FF2A8A84C +:1001B0002000B188000041024DF20039C0010082E8 +:1001C000045000440DF2A3A84DF20039045000443D +:1001D000FF00E2AB20000088000061024DF204192C +:1001E00004500044FF00E2ABA00000880000611052 +:1001F0004DF2041904500044FF20E2AB6000008877 +:10020000000071C04DF204190450004400007A0A45 +:100210002001F08001A0410A001100C42001F080FB +:10022000C130041904500044000079800C4100845E +:100230008900718BC83004199700718BCD0000398B +:100240000001B1808000041982000419C120041942 +:10025000C3200419C2300419CD100419CF10041999 +:10026000B000718B84000419860004198000718B22 +:10027000CB2004199300014FCD300009CF30000985 +:100280000302044908410014045000440000638044 +:100290000000061903000449045000442001638053 +:1002A000000006190020E28B00C100844700518B3A +:1002B000C020003900006380C1A0041900E100449F +:1002C000BD00518BC02000390000B180C1A00419CD +:1002D00003000449045000440020610A0001004565 +:1002E0000230610A0C8300C40C780844045A0844A4 +:1002F000B200094F1042098E05B0E01804230084B3 +:100300000C01001108056110004908440048084428 +:10031000B200094F8000718BC00000820C013310C5 +:100320002801A31000017A808C0100800230610A4C +:10033000200004190C8300C405B0C818084300C489 +:100340000130C80A0C3800C4088800440C780844FE +:10035000045A08440000A318800004190B0461A883 +:10036000C3200039C33004190F10610ACA300419C0 +:10037000090441A8E1200039D100094F00046102BD +:10038000086300440330410A20000039A300094FEC +:100390000004610200480844088800440230610AF1 +:1003A000000800C40C780844045A0844B200090F3D +:1003B0001040098E0000685B2004B1800200615B80 +:1003C00088037A80AC01008005B0E01800D3008477 +:1003D0000049084400480844B200090F8000718BAE +:1003E000C00000820230610A000800C405B0C818CD +:1003F0000C1800C40130C80A0C3800C40888004436 +:100400000C780844000061182005B180000068CB1A +:10041000800004190D10610AC33004190B0441A8AF +:10042000090441A8E1200039083800440330410A9A +:100430002004B18000480844088800440000B180CE +:10044000C23004190CB800D40F30610A0D30C80A4C +:100450000CB800C49300014FE700016F0F30610A30 +:1004600020000088020061024104041902046102B4 +:1004700043040439CF3000092000094900590044E1 +:100480009300014FE700016F0D30610A2000618881 +:10049000C2000082C2030082CD3000092000094959 +:1004A0000F30610A0D30C80A0C5800840230610A0E +:1004B00005B0A818C2300419000000469040098F0A +:1004C0001204096E0300090E0001718220010080F0 +:1004D000000061CB8004B1800001E0600CD80414FE +:1004E0000001EB804000521B80007980C00171C286 +:1004F0002000C080080A0454C004A8828000721B37 +:10050000800000800001F0802000C0800C2A04548C +:10051000C004A8821000721B800000800001F080DF +:100520002000C080083A0454C004A8822000721B36 +:1005300080000080C003F0822000A0800001001134 +:100540004000C28B00AA00C40000E98005B0A818D2 +:100550000001A822D0010082F000E21B0620A80AB8 +:100560002D10610AD100092E0001A8020E10C80A40 +:100570000CBA04140E10610A044A00440C10C80A94 +:10058000044A04540C10610AD00100820010A8181B +:10059000A0000088000171820300090E9A0100602A +:1005A0003200092E00000046000171822001008007 +:1005B000000061CB8024B1C00031E0600CCA04149B +:1005C0000001EB804000521B80007980C00171C2A5 +:1005D0002000C08008DA0454C004A8828000721B86 +:1005E000800000800001F0802000C0800CFA0454DC +:1005F000C004A8821000721B800000800001F080FF +:100600002000C08008290454C004A8822000721B66 +:1006100080000080C003F0822000A0800001001153 +:100620004000C28B003900C40000E98005B0A81862 +:100630000001A822D0010082B000E21B0620A80A17 +:100640002F10610AF100092E0001A8020E10C80A3D +:100650000CA904140E10610A049900440C10C80A75 +:10066000049904540C10610AD00100820010A818EB +:10067000A0000088000171829F0100600000004618 +:10068000000033800000838020007A8020073380C0 +:100690000000838020047A80200100800000004652 +:1006A0000200610A041B04140100610A0300480AE5 +:1006B0000C790454C300041904C900440800C80A92 +:1006C00004C90454C80004190A00610A0900480A50 +:1006D0000CE90454C900041904D900440B00C80AE9 +:1006E00004D90454CB0004190400610A0600480A26 +:1006F0000CF90454C6000419040B00440500C80A90 +:10070000040B0454C50004190700610A0C00480AD0 +:100710000C2B0454CC000419041B00440E00C80A1E +:10072000041B0454CE000419000040459220718B34 +:04073000A6C5110049 +:00000001FF +/* + * Copyright (c) 1994 Creative Technology Ltd. + * Microcode files for SB16 Advanced Signal Processor + */ diff --git a/firmware/sb16/ima_adpcm_init.csp.ihex b/firmware/sb16/ima_adpcm_init.csp.ihex new file mode 100644 index 000000000000..a899a9e743f4 --- /dev/null +++ b/firmware/sb16/ima_adpcm_init.csp.ihex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opyright (c) 1994 Creative Technology Ltd. + * Microcode files for SB16 Advanced Signal Processor + */ diff --git a/firmware/sb16/ima_adpcm_playback.csp.ihex b/firmware/sb16/ima_adpcm_playback.csp.ihex new file mode 100644 index 000000000000..f09f18cf35e2 --- /dev/null +++ b/firmware/sb16/ima_adpcm_playback.csp.ihex @@ -0,0 +1,122 @@ +:1000000000100044080000440C50004400700044FC +:10001000047000440DF261A8440404190000404536 +:100020000004638000000639FF2E2149FF0DD449EA +:10003000404939AC5555718B5001B1800001B180F8 +:10004000C92004195100718BCD000419E420718B73 +:10005000CF0004198000718BCB2004191000718B24 +:10006000C42004196500518BC22000390000B18002 +:10007000C230041900006380C1A004199300014F2D +:10008000CD300009CF300009044000140C400014AA +:10009000000461A8020461A804600424000034493B +:1000A000005000444404043900004045000040452D +:1000B0000F00610A00010045404009EFFF2009CF11 +:1000C000000463A1500333800004A38000FFC28BAF +:1000D00008F004540CD000C4200380C03000008815 +:1000E00000007A0AD001008208500044C000009944 +:1000F0000850004400FFC28B20000080000D428B9E +:1001000000A200C4000E428B0C9200C4001E428B61 +:10011000046200C4008E428B0C5200C4009E428BCD +:1001200000C200C400BE428B00C200C40004428B67 +:1001300000F200C40024428B009100C40055428BA1 +:10014000085000C4003F428B08E200C40000404554 +:10015000200179800030428B009200C400004045AD +:100160000000718B4001008008500044FF00E2ABAA +:100170000C4200C40FF2A8A82000B1880000410280 +:100180004DF20039C0010082085000440DF2A3A8CE +:100190004DF2003908500044FF00E2AB2000008817 +:1001A000000061024DF2041908500044FF00E2AB68 +:1001B000A0000088000061104DF2041908500044AE +:1001C000FF20E2AB60000088000071C04DF204190E +:1001D0000850004400007A0A2001F08001A0410A82 +:1001E00004D200C42001F080C1300419085000443A +:1001F0000000798000A10084B500518BCF00003948 +:100200000001B180880004198A000419C82004196B +:10021000CA200419C2300419CD100419CF100419D2 +:10022000B000718B8C0004198E0004191000718BC2 +:10023000C42004199300014FCD300009CF300009CC +:100240000303044904810054085004640850004426 +:1002500000006380000006190300044908500044B0 +:1002600020016380000006190002E28B084100842F +:100270006500518BC220003900006380C1A00419C1 +:10028000086100442D00518BC22000390000B1806C +:10029000C1A0041903000449085000440220610A67 +:1002A000000100450230610A040300C405B0C8180B +:1002B000047100C4001300440079084400047980EC +:1002C000004900C4CA2004194A040419FF00E28B43 +:1002D0000CF90844CF1004190C2B08448E000419A3 +:1002E0000330610AC8200039480400390A30610A25 +:1002F0000CF90844CD1004190C2B08448C00041987 +:100300000CD908440C5A0044007908440004798050 +:10031000004900C4C3300419CA3000990CD90844FC +:10032000420A090E000133118C01A38000017A10EA +:100330008005B18005B0E01800930084007908447E +:1003400000047980004900C40C1B0844880004198B +:100350008A0000990CD90844420A090E8000718B6A +:10036000C004B1821000E00B004300840230610A37 +:100370000130C80A004300840000B180C230041973 +:100380000CA800440230610A00D300C405B0C818AC +:10039000046300C408F30044007908440004798031 +:1003A000004900C420000419FF00E28B0CF9084446 +:1003B000CD100419CF1004190C2B08448C0004191B +:1003C0008E0004190330610AC8200039CA200039A0 +:1003D000480400394A0400390CD908440C5A004436 +:1003E0000079084400047980004900C4C33004192E +:1003F0000CD90844420A090E05B0E0180018008420 +:100400000079084400047980004900C40C1B0844AA +:10041000800100800CD90844420A090E8000718BCB +:10042000C004B1821000E00B008800840230610A31 +:100430000130C80A008800840000B180C23004196D +:1004400000010011000FE28B000041CB8C00008006 +:10045000000048CB20007A8080010080820C096E69 +:100460000308090E804009CF000171C20008C21BB9 +:1004700004B800C42005A8802001F0800001C21B40 +:10048000044800C42005A8802001F0800002C21B9F +:10049000046800C42005A8802001F0802003A88003 +:1004A000000100110004C28B087800C40000E9803C +:1004B00005B0A81800004ACB2000A822D001008275 +:1004C00040010080C4000419B000E28B0620A80A95 +:1004D0002D10610AD108092E0001A8020CF9084468 +:1004E000CD1004190C2B08440308090E9A25B1609D +:1004F000A20E096E0300090F000171822001008025 +:10050000000061CB800100800300090F000171C26F +:100510000008C21B0C2A00C42005A8802001F0801E +:100520000001C21B0C1A00C42005A8802001F08025 +:100530000002C21B0C3A00C42005A8802001F080F4 +:100540002003A880000100110004C28B04AA00C48B +:100550000000E98005B0A81800004ACB2000A822BE +:10056000D001008240010080C7000419B000E28B76 +:100570000620A80A2F10610AF108092E0001A8021E +:100580000CF90844CF1004190C2B08449F35B160B6 +:100590000308090E0001718220010080000061CB78 +:1005A00080010080E420718B000100459040098F9C +:1005B0000005638000000639081904D49300014F38 +:1005C000E700016F0D30610A200461A8C2000082BB +:1005D000020461A8C2000082CD30000902000002BE +:1005E00002000002C0800009200009490F30610AA2 +:1005F0000D30C80A002900C40080C80A002900C4C0 +:100600000004B18000000639C920043900390044D3 +:1006100000046380000006390004B180C920043959 +:10062000003900440920230A00000619C9200419D2 +:10063000000040450200610A0CB904140400610A7C +:100640000600480A00A90454C60004190CA9004475 +:100650000500C80A0CA90454C50004190700610A62 +:100660000C00480A00B90454CC0004190CB9004429 +:100670000E00C80A0CB90454CE0004190C5A0044E8 +:10068000820D092E804009CF00DF718B8001008030 +:1006900002C1002203C1002200016580D2056582EB +:1006A00040210080D3030082403300800C5A004474 +:1006B0000F30610A0D30C80A08D900C49300014FF9 +:1006C000E700016F0F30610A20000088020061021C +:1006D00002000003CF3000092000094900046380B4 +:1006E00004D900440004B180000000460230610AD1 +:1006F00005B0A818C2300419000000460E10C80A40 +:100700000C0B04140E10610A042B00440C10C80AD0 +:10071000042B04540C10610A000000460010A818B5 +:10072000A0000088000171820000004600043380B0 +:100730000000838020047A802001338000008380C1 +:1007400020007A80200300800000004616CE1100B1 +:00000001FF +/* + * Copyright (c) 1994 Creative Technology Ltd. + * Microcode files for SB16 Advanced Signal Processor + */ diff --git a/firmware/sb16/mulaw_main.csp.ihex b/firmware/sb16/mulaw_main.csp.ihex new file mode 100644 index 000000000000..b64b565f2296 --- /dev/null +++ b/firmware/sb16/mulaw_main.csp.ihex @@ -0,0 +1,84 @@ +:10000000001000440800004400B1004400610044B6 +:10001000085000440DF261A8440404190000404552 +:10002000404939AC5555718B500563800000063945 +:10003000FF2E2149FF0FD4492001090E2000718BAA +:10004000A801A8808801A880A8000080D200718B38 +:100050008800A880A804B3802007B3808803B180FB +:10006000C000095CC2010082A100718BCD0004199F +:10007000A220718BCF0004190000B180C2000419C6 +:100080000040001408400424000034490C4000449F +:1000900044040439000040453200095C00000C397A +:1000A00000004045404009EFFF2009CF000463A154 +:1000B000500333800004A38000FFC28B00D004549F +:1000C00004E000C4200380C03000008800007A0AE9 +:1000D000D001008200600044C0000099006000442C +:1000E00000FFC28B20000080000D428B083200C44C +:1000F000000E428B00A200C4001E428B0CB200C452 +:10010000008E428B006200C4009E428B085200C4E5 +:1001100000BE428B085200C40004428B047200C42B +:100120000024428B00D200C40055428B006000C402 +:1001300000004045200179800030428B088200C4D5 +:10014000000040450000718B4001008000600044C9 +:10015000FF00E2AB00B200C40FF2A8A82000B188F3 +:10016000000041024DF20039C001008200600044ED +:100170000DF2A3A84DF2003900600044FF00E2AB8D +:1001800020000088000061024DF204190060004464 +:10019000FF00E2ABA0000088000061104DF20419DE +:1001A00000600044FF20E2AB60000088000071C0E6 +:1001B0004DF20419006000440000798000E20084E0 +:1001C0000303044908C20054006004640060004452 +:1001D0000000638000000619030004490060004429 +:1001E00020016380000006190020E28B0CF20084DD +:1001F0003E00518BC0200039080100446C00518B37 +:10020000C02000390002E28B04210084FD00518BE4 +:10021000C220003900110044FE00518BC220003979 +:10022000E500718BCD0000390000B180C9200419B0 +:10023000CB200419C1200419C32004191000718BAC +:10024000C72004195E00718BCF0000390000B18017 +:10025000C4200419C6200419C8200419CA2004198E +:100260002000718BCC200419030004490060004475 +:10027000090461A8C10004190B0461A8CA0004198B +:10028000046000D40D00610A9040098F0001004510 +:100290000F00610A0040098F000100458200092E0D +:1002A000804009CF02006122432561224033008053 +:1002B00008A800442031495C9200094E0203092E2F +:1002C0000000A302C00071C02000EB800004C28BBC +:1002D0002004618000047A02CB00A858B005F380A6 +:1002E0002004A81000001039B000E08B200100802D +:1002F000000063CB00007A024000015B2000008018 +:1003000000004ACB2000138020007A80E02100C04A +:10031000080008491041098EFFFF628B000461222A +:1003200000030045220133802001A30200007A80EF +:10033000C00000820720400A08830084402100801A +:1003400040059310C7200039000040450720400AAF +:100350000CA30084080000820C246150400100803E +:10036000C7200039000040450004638000000639C2 +:100370004201090E0220610A000100450C20600ABA +:10038000007300840004B180000006390C6104D4BD +:10039000002471C0203333C0E001A38222037A021B +:1003A000C301A3822001338000007A80C201B350D0 +:1003B000CC2000390000718000F300440C20600A5A +:1003C00000D300840004B180000006390C6104D41D +:1003D0000000B310CC200039000071C000F30044CD +:1003E000CC200039002071C0003071C000F30044FF +:1003F00020010080FFFF628B20013380000083809A +:1004000020007A8020E1095C8200092F804A098E51 +:10041000E001B3822004A38000007ACB0300A81877 +:10042000000010390804EA1008047A102000008047 +:10043000400021CB0C00E810000041020C00EB1042 +:10044000F2010082402133020820610AC40004192D +:10045000C70000990200610A0CE804140100610A57 +:100460000300480A00B80454C30004190CB800443F +:100470000800C80A0CB80454C80004190A00610A2C +:100480000900480A00680454C90004190C680044B3 +:100490000B00C80A0C680454CB0004190400610A5C +:1004A0000600480A00780454C60004190C78004479 +:1004B0000500C80A0C780454C50004190700610A35 +:1004C0000C00480A00E80454CC0004190CE800446D +:1004D0000E00C80A0CE80454CE0004190000404580 +:0804E0002010718B093F070099 +:00000001FF +/* + * Copyright (c) 1994 Creative Technology Ltd. + * Microcode files for SB16 Advanced Signal Processor + */ diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index 2639a6ab8f2e..1ff9f631084f 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -391,15 +391,6 @@ config SND_SB16_CSP coprocessor can do variable tasks like various compression and decompression algorithms. -config SND_SB16_CSP_FIRMWARE_IN_KERNEL - bool "In-kernel firmware for SB16 CSP" - depends on SND_SB16_CSP - default y - help - Say Y here to include the static firmware built in the kernel - for the SB16 CSP controller. If you choose N here, you need - to install the firmware files from the alsa-firmware package. - config SND_SGALAXY tristate "Aztech Sound Galaxy" depends on SND diff --git a/sound/isa/sb/sb16_csp.c b/sound/isa/sb/sb16_csp.c index f3fd7b4f4668..35f3d7b16536 100644 --- a/sound/isa/sb/sb16_csp.c +++ b/sound/isa/sb/sb16_csp.c @@ -35,13 +35,11 @@ MODULE_AUTHOR("Uros Bizjak "); MODULE_DESCRIPTION("ALSA driver for SB16 Creative Signal Processor"); MODULE_LICENSE("GPL"); -#ifndef CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL MODULE_FIRMWARE("sb16/mulaw_main.csp"); MODULE_FIRMWARE("sb16/alaw_main.csp"); MODULE_FIRMWARE("sb16/ima_adpcm_init.csp"); MODULE_FIRMWARE("sb16/ima_adpcm_playback.csp"); MODULE_FIRMWARE("sb16/ima_adpcm_capture.csp"); -#endif #ifdef SNDRV_LITTLE_ENDIAN #define CSP_HDR_VALUE(a,b,c,d) ((a) | ((b)<<8) | ((c)<<16) | ((d)<<24)) @@ -168,17 +166,13 @@ int snd_sb_csp_new(struct snd_sb *chip, int device, struct snd_hwdep ** rhwdep) */ static void snd_sb_csp_free(struct snd_hwdep *hwdep) { -#ifndef CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL int i; -#endif struct snd_sb_csp *p = hwdep->private_data; if (p) { if (p->running & SNDRV_SB_CSP_ST_RUNNING) snd_sb_csp_stop(p); -#ifndef CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL for (i = 0; i < ARRAY_SIZE(p->csp_programs); ++i) release_firmware(p->csp_programs[i]); -#endif kfree(p); } } @@ -701,18 +695,6 @@ static int snd_sb_csp_load_user(struct snd_sb_csp * p, const unsigned char __use return err; } -#ifdef CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL -#include "sb16_csp_codecs.h" - -static const struct firmware snd_sb_csp_static_programs[] = { - { .data = mulaw_main, .size = sizeof mulaw_main }, - { .data = alaw_main, .size = sizeof alaw_main }, - { .data = ima_adpcm_init, .size = sizeof ima_adpcm_init }, - { .data = ima_adpcm_playback, .size = sizeof ima_adpcm_playback }, - { .data = ima_adpcm_capture, .size = sizeof ima_adpcm_capture }, -}; -#endif - static int snd_sb_csp_firmware_load(struct snd_sb_csp *p, int index, int flags) { static const char *const names[] = { @@ -727,14 +709,10 @@ static int snd_sb_csp_firmware_load(struct snd_sb_csp *p, int index, int flags) BUILD_BUG_ON(ARRAY_SIZE(names) != CSP_PROGRAM_COUNT); program = p->csp_programs[index]; if (!program) { -#ifdef CONFIG_SND_SB16_CSP_FIRMWARE_IN_KERNEL - program = &snd_sb_csp_static_programs[index]; -#else int err = request_firmware(&program, names[index], p->chip->card->dev); if (err < 0) return err; -#endif p->csp_programs[index] = program; } return snd_sb_csp_load(p, program->data, program->size, flags); diff --git a/sound/isa/sb/sb16_csp_codecs.h b/sound/isa/sb/sb16_csp_codecs.h deleted file mode 100644 index f0e8b0dcb572..000000000000 --- a/sound/isa/sb/sb16_csp_codecs.h +++ /dev/null @@ -1,949 +0,0 @@ -/* - * Copyright (c) 1994 Creative Technology Ltd. - * Microcode files for SB16 Advanced Signal Processor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -static unsigned char mulaw_main[] = { - 0x00, 0x10, 0x00, 0x44, 0x08, 0x00, 0x00, 0x44, - 0x00, 0xb1, 0x00, 0x44, 0x00, 0x61, 0x00, 0x44, - 0x08, 0x50, 0x00, 0x44, 0x0d, 0xf2, 0x61, 0xa8, - 0x44, 0x04, 0x04, 0x19, 0x00, 0x00, 0x40, 0x45, - 0x40, 0x49, 0x39, 0xac, 0x55, 0x55, 0x71, 0x8b, - 0x50, 0x05, 0x63, 0x80, 0x00, 0x00, 0x06, 0x39, - 0xff, 0x2e, 0x21, 0x49, 0xff, 0x0f, 0xd4, 0x49, - 0x20, 0x01, 0x09, 0x0e, 0x20, 0x00, 0x71, 0x8b, - 0xa8, 0x01, 0xa8, 0x80, 0x88, 0x01, 0xa8, 0x80, - 0xa8, 0x00, 0x00, 0x80, 0xd2, 0x00, 0x71, 0x8b, - 0x88, 0x00, 0xa8, 0x80, 0xa8, 0x04, 0xb3, 0x80, - 0x20, 0x07, 0xb3, 0x80, 0x88, 0x03, 0xb1, 0x80, - 0xc0, 0x00, 0x09, 0x5c, 0xc2, 0x01, 0x00, 0x82, - 0xa1, 0x00, 0x71, 0x8b, 0xcd, 0x00, 0x04, 0x19, - 0xa2, 0x20, 0x71, 0x8b, 0xcf, 0x00, 0x04, 0x19, - 0x00, 0x00, 0xb1, 0x80, 0xc2, 0x00, 0x04, 0x19, - 0x00, 0x40, 0x00, 0x14, 0x08, 0x40, 0x04, 0x24, - 0x00, 0x00, 0x34, 0x49, 0x0c, 0x40, 0x00, 0x44, - 0x44, 0x04, 0x04, 0x39, 0x00, 0x00, 0x40, 0x45, - 0x32, 0x00, 0x09, 0x5c, 0x00, 0x00, 0x0c, 0x39, - 0x00, 0x00, 0x40, 0x45, 0x40, 0x40, 0x09, 0xef, - 0xff, 0x20, 0x09, 0xcf, 0x00, 0x04, 0x63, 0xa1, - 0x50, 0x03, 0x33, 0x80, 0x00, 0x04, 0xa3, 0x80, - 0x00, 0xff, 0xc2, 0x8b, 0x00, 0xd0, 0x04, 0x54, - 0x04, 0xe0, 0x00, 0xc4, 0x20, 0x03, 0x80, 0xc0, - 0x30, 0x00, 0x00, 0x88, 0x00, 0x00, 0x7a, 0x0a, - 0xd0, 0x01, 0x00, 0x82, 0x00, 0x60, 0x00, 0x44, - 0xc0, 0x00, 0x00, 0x99, 0x00, 0x60, 0x00, 0x44, - 0x00, 0xff, 0xc2, 0x8b, 0x20, 0x00, 0x00, 0x80, - 0x00, 0x0d, 0x42, 0x8b, 0x08, 0x32, 0x00, 0xc4, - 0x00, 0x0e, 0x42, 0x8b, 0x00, 0xa2, 0x00, 0xc4, - 0x00, 0x1e, 0x42, 0x8b, 0x0c, 0xb2, 0x00, 0xc4, - 0x00, 0x8e, 0x42, 0x8b, 0x00, 0x62, 0x00, 0xc4, - 0x00, 0x9e, 0x42, 0x8b, 0x08, 0x52, 0x00, 0xc4, - 0x00, 0xbe, 0x42, 0x8b, 0x08, 0x52, 0x00, 0xc4, - 0x00, 0x04, 0x42, 0x8b, 0x04, 0x72, 0x00, 0xc4, - 0x00, 0x24, 0x42, 0x8b, 0x00, 0xd2, 0x00, 0xc4, - 0x00, 0x55, 0x42, 0x8b, 0x00, 0x60, 0x00, 0xc4, - 0x00, 0x00, 0x40, 0x45, 0x20, 0x01, 0x79, 0x80, - 0x00, 0x30, 0x42, 0x8b, 0x08, 0x82, 0x00, 0xc4, - 0x00, 0x00, 0x40, 0x45, 0x00, 0x00, 0x71, 0x8b, - 0x40, 0x01, 0x00, 0x80, 0x00, 0x60, 0x00, 0x44, - 0xff, 0x00, 0xe2, 0xab, 0x00, 0xb2, 0x00, 0xc4, - 0x0f, 0xf2, 0xa8, 0xa8, 0x20, 0x00, 0xb1, 0x88, - 0x00, 0x00, 0x41, 0x02, 0x4d, 0xf2, 0x00, 0x39, - 0xc0, 0x01, 0x00, 0x82, 0x00, 0x60, 0x00, 0x44, - 0x0d, 0xf2, 0xa3, 0xa8, 0x4d, 0xf2, 0x00, 0x39, - 0x00, 0x60, 0x00, 0x44, 0xff, 0x00, 0xe2, 0xab, - 0x20, 0x00, 0x00, 0x88, 0x00, 0x00, 0x61, 0x02, - 0x4d, 0xf2, 0x04, 0x19, 0x00, 0x60, 0x00, 0x44, - 0xff, 0x00, 0xe2, 0xab, 0xa0, 0x00, 0x00, 0x88, - 0x00, 0x00, 0x61, 0x10, 0x4d, 0xf2, 0x04, 0x19, - 0x00, 0x60, 0x00, 0x44, 0xff, 0x20, 0xe2, 0xab, - 0x60, 0x00, 0x00, 0x88, 0x00, 0x00, 0x71, 0xc0, - 0x4d, 0xf2, 0x04, 0x19, 0x00, 0x60, 0x00, 0x44, - 0x00, 0x00, 0x79, 0x80, 0x00, 0xe2, 0x00, 0x84, - 0x03, 0x03, 0x04, 0x49, 0x08, 0xc2, 0x00, 0x54, - 0x00, 0x60, 0x04, 0x64, 0x00, 0x60, 0x00, 0x44, - 0x00, 0x00, 0x63, 0x80, 0x00, 0x00, 0x06, 0x19, - 0x03, 0x00, 0x04, 0x49, 0x00, 0x60, 0x00, 0x44, - 0x20, 0x01, 0x63, 0x80, 0x00, 0x00, 0x06, 0x19, - 0x00, 0x20, 0xe2, 0x8b, 0x0c, 0xf2, 0x00, 0x84, - 0x3e, 0x00, 0x51, 0x8b, 0xc0, 0x20, 0x00, 0x39, - 0x08, 0x01, 0x00, 0x44, 0x6c, 0x00, 0x51, 0x8b, - 0xc0, 0x20, 0x00, 0x39, 0x00, 0x02, 0xe2, 0x8b, - 0x04, 0x21, 0x00, 0x84, 0xfd, 0x00, 0x51, 0x8b, - 0xc2, 0x20, 0x00, 0x39, 0x00, 0x11, 0x00, 0x44, - 0xfe, 0x00, 0x51, 0x8b, 0xc2, 0x20, 0x00, 0x39, - 0xe5, 0x00, 0x71, 0x8b, 0xcd, 0x00, 0x00, 0x39, - 0x00, 0x00, 0xb1, 0x80, 0xc9, 0x20, 0x04, 0x19, - 0xcb, 0x20, 0x04, 0x19, 0xc1, 0x20, 0x04, 0x19, - 0xc3, 0x20, 0x04, 0x19, 0x10, 0x00, 0x71, 0x8b, - 0xc7, 0x20, 0x04, 0x19, 0x5e, 0x00, 0x71, 0x8b, - 0xcf, 0x00, 0x00, 0x39, 0x00, 0x00, 0xb1, 0x80, - 0xc4, 0x20, 0x04, 0x19, 0xc6, 0x20, 0x04, 0x19, - 0xc8, 0x20, 0x04, 0x19, 0xca, 0x20, 0x04, 0x19, - 0x20, 0x00, 0x71, 0x8b, 0xcc, 0x20, 0x04, 0x19, - 0x03, 0x00, 0x04, 0x49, 0x00, 0x60, 0x00, 0x44, - 0x09, 0x04, 0x61, 0xa8, 0xc1, 0x00, 0x04, 0x19, - 0x0b, 0x04, 0x61, 0xa8, 0xca, 0x00, 0x04, 0x19, - 0x04, 0x60, 0x00, 0xd4, 0x0d, 0x00, 0x61, 0x0a, - 0x90, 0x40, 0x09, 0x8f, 0x00, 0x01, 0x00, 0x45, - 0x0f, 0x00, 0x61, 0x0a, 0x00, 0x40, 0x09, 0x8f, - 0x00, 0x01, 0x00, 0x45, 0x82, 0x00, 0x09, 0x2e, - 0x80, 0x40, 0x09, 0xcf, 0x02, 0x00, 0x61, 0x22, - 0x43, 0x25, 0x61, 0x22, 0x40, 0x33, 0x00, 0x80, - 0x08, 0xa8, 0x00, 0x44, 0x20, 0x31, 0x49, 0x5c, - 0x92, 0x00, 0x09, 0x4e, 0x02, 0x03, 0x09, 0x2e, - 0x00, 0x00, 0xa3, 0x02, 0xc0, 0x00, 0x71, 0xc0, - 0x20, 0x00, 0xeb, 0x80, 0x00, 0x04, 0xc2, 0x8b, - 0x20, 0x04, 0x61, 0x80, 0x00, 0x04, 0x7a, 0x02, - 0xcb, 0x00, 0xa8, 0x58, 0xb0, 0x05, 0xf3, 0x80, - 0x20, 0x04, 0xa8, 0x10, 0x00, 0x00, 0x10, 0x39, - 0xb0, 0x00, 0xe0, 0x8b, 0x20, 0x01, 0x00, 0x80, - 0x00, 0x00, 0x63, 0xcb, 0x00, 0x00, 0x7a, 0x02, - 0x40, 0x00, 0x01, 0x5b, 0x20, 0x00, 0x00, 0x80, - 0x00, 0x00, 0x4a, 0xcb, 0x20, 0x00, 0x13, 0x80, - 0x20, 0x00, 0x7a, 0x80, 0xe0, 0x21, 0x00, 0xc0, - 0x08, 0x00, 0x08, 0x49, 0x10, 0x41, 0x09, 0x8e, - 0xff, 0xff, 0x62, 0x8b, 0x00, 0x04, 0x61, 0x22, - 0x00, 0x03, 0x00, 0x45, 0x22, 0x01, 0x33, 0x80, - 0x20, 0x01, 0xa3, 0x02, 0x00, 0x00, 0x7a, 0x80, - 0xc0, 0x00, 0x00, 0x82, 0x07, 0x20, 0x40, 0x0a, - 0x08, 0x83, 0x00, 0x84, 0x40, 0x21, 0x00, 0x80, - 0x40, 0x05, 0x93, 0x10, 0xc7, 0x20, 0x00, 0x39, - 0x00, 0x00, 0x40, 0x45, 0x07, 0x20, 0x40, 0x0a, - 0x0c, 0xa3, 0x00, 0x84, 0x08, 0x00, 0x00, 0x82, - 0x0c, 0x24, 0x61, 0x50, 0x40, 0x01, 0x00, 0x80, - 0xc7, 0x20, 0x00, 0x39, 0x00, 0x00, 0x40, 0x45, - 0x00, 0x04, 0x63, 0x80, 0x00, 0x00, 0x06, 0x39, - 0x42, 0x01, 0x09, 0x0e, 0x02, 0x20, 0x61, 0x0a, - 0x00, 0x01, 0x00, 0x45, 0x0c, 0x20, 0x60, 0x0a, - 0x00, 0x73, 0x00, 0x84, 0x00, 0x04, 0xb1, 0x80, - 0x00, 0x00, 0x06, 0x39, 0x0c, 0x61, 0x04, 0xd4, - 0x00, 0x24, 0x71, 0xc0, 0x20, 0x33, 0x33, 0xc0, - 0xe0, 0x01, 0xa3, 0x82, 0x22, 0x03, 0x7a, 0x02, - 0xc3, 0x01, 0xa3, 0x82, 0x20, 0x01, 0x33, 0x80, - 0x00, 0x00, 0x7a, 0x80, 0xc2, 0x01, 0xb3, 0x50, - 0xcc, 0x20, 0x00, 0x39, 0x00, 0x00, 0x71, 0x80, - 0x00, 0xf3, 0x00, 0x44, 0x0c, 0x20, 0x60, 0x0a, - 0x00, 0xd3, 0x00, 0x84, 0x00, 0x04, 0xb1, 0x80, - 0x00, 0x00, 0x06, 0x39, 0x0c, 0x61, 0x04, 0xd4, - 0x00, 0x00, 0xb3, 0x10, 0xcc, 0x20, 0x00, 0x39, - 0x00, 0x00, 0x71, 0xc0, 0x00, 0xf3, 0x00, 0x44, - 0xcc, 0x20, 0x00, 0x39, 0x00, 0x20, 0x71, 0xc0, - 0x00, 0x30, 0x71, 0xc0, 0x00, 0xf3, 0x00, 0x44, - 0x20, 0x01, 0x00, 0x80, 0xff, 0xff, 0x62, 0x8b, - 0x20, 0x01, 0x33, 0x80, 0x00, 0x00, 0x83, 0x80, - 0x20, 0x00, 0x7a, 0x80, 0x20, 0xe1, 0x09, 0x5c, - 0x82, 0x00, 0x09, 0x2f, 0x80, 0x4a, 0x09, 0x8e, - 0xe0, 0x01, 0xb3, 0x82, 0x20, 0x04, 0xa3, 0x80, - 0x00, 0x00, 0x7a, 0xcb, 0x03, 0x00, 0xa8, 0x18, - 0x00, 0x00, 0x10, 0x39, 0x08, 0x04, 0xea, 0x10, - 0x08, 0x04, 0x7a, 0x10, 0x20, 0x00, 0x00, 0x80, - 0x40, 0x00, 0x21, 0xcb, 0x0c, 0x00, 0xe8, 0x10, - 0x00, 0x00, 0x41, 0x02, 0x0c, 0x00, 0xeb, 0x10, - 0xf2, 0x01, 0x00, 0x82, 0x40, 0x21, 0x33, 0x02, - 0x08, 0x20, 0x61, 0x0a, 0xc4, 0x00, 0x04, 0x19, - 0xc7, 0x00, 0x00, 0x99, 0x02, 0x00, 0x61, 0x0a, - 0x0c, 0xe8, 0x04, 0x14, 0x01, 0x00, 0x61, 0x0a, - 0x03, 0x00, 0x48, 0x0a, 0x00, 0xb8, 0x04, 0x54, - 0xc3, 0x00, 0x04, 0x19, 0x0c, 0xb8, 0x00, 0x44, - 0x08, 0x00, 0xc8, 0x0a, 0x0c, 0xb8, 0x04, 0x54, - 0xc8, 0x00, 0x04, 0x19, 0x0a, 0x00, 0x61, 0x0a, - 0x09, 0x00, 0x48, 0x0a, 0x00, 0x68, 0x04, 0x54, - 0xc9, 0x00, 0x04, 0x19, 0x0c, 0x68, 0x00, 0x44, - 0x0b, 0x00, 0xc8, 0x0a, 0x0c, 0x68, 0x04, 0x54, - 0xcb, 0x00, 0x04, 0x19, 0x04, 0x00, 0x61, 0x0a, - 0x06, 0x00, 0x48, 0x0a, 0x00, 0x78, 0x04, 0x54, - 0xc6, 0x00, 0x04, 0x19, 0x0c, 0x78, 0x00, 0x44, - 0x05, 0x00, 0xc8, 0x0a, 0x0c, 0x78, 0x04, 0x54, - 0xc5, 0x00, 0x04, 0x19, 0x07, 0x00, 0x61, 0x0a, - 0x0c, 0x00, 0x48, 0x0a, 0x00, 0xe8, 0x04, 0x54, - 0xcc, 0x00, 0x04, 0x19, 0x0c, 0xe8, 0x00, 0x44, - 0x0e, 0x00, 0xc8, 0x0a, 0x0c, 0xe8, 0x04, 0x54, - 0xce, 0x00, 0x04, 0x19, 0x00, 0x00, 0x40, 0x45, - 0x20, 0x10, 0x71, 0x8b, 0x09, 0x3f, 0x07, 0x00 -}; - -static unsigned char alaw_main[] = { - 0x00, 0x10, 0x00, 0x44, 0x08, 0x00, 0x00, 0x44, - 0x00, 0xb1, 0x00, 0x44, 0x00, 0x61, 0x00, 0x44, - 0x08, 0x50, 0x00, 0x44, 0x0d, 0xf2, 0x61, 0xa8, - 0x44, 0x04, 0x04, 0x19, 0x00, 0x00, 0x40, 0x45, - 0x40, 0x49, 0x39, 0xac, 0x55, 0x55, 0x71, 0x8b, - 0x50, 0x05, 0x63, 0x80, 0x00, 0x00, 0x06, 0x39, - 0xff, 0x2e, 0x21, 0x49, 0xff, 0x0f, 0xd4, 0x49, - 0x20, 0x01, 0x09, 0x0e, 0x20, 0x00, 0x71, 0x8b, - 0xa8, 0x01, 0xa8, 0x80, 0x88, 0x01, 0xa8, 0x80, - 0xa8, 0x00, 0x00, 0x80, 0xd2, 0x00, 0x71, 0x8b, - 0x88, 0x00, 0xa8, 0x80, 0xa8, 0x04, 0xb3, 0x80, - 0x20, 0x07, 0xb3, 0x80, 0x88, 0x03, 0xb1, 0x80, - 0xc0, 0x00, 0x09, 0x5c, 0xc2, 0x01, 0x00, 0x82, - 0xa1, 0x00, 0x71, 0x8b, 0xcd, 0x00, 0x04, 0x19, - 0x21, 0x20, 0x71, 0x8b, 0xcf, 0x00, 0x04, 0x19, - 0x00, 0x00, 0xb1, 0x80, 0xc2, 0x00, 0x04, 0x19, - 0x00, 0x40, 0x00, 0x14, 0x08, 0x40, 0x04, 0x24, - 0x00, 0x00, 0x34, 0x49, 0x0c, 0x40, 0x00, 0x44, - 0x44, 0x04, 0x04, 0x39, 0x00, 0x00, 0x40, 0x45, - 0x32, 0x00, 0x09, 0x5c, 0x00, 0x00, 0x0c, 0x39, - 0x00, 0x00, 0x40, 0x45, 0x40, 0x40, 0x09, 0xef, - 0xff, 0x20, 0x09, 0xcf, 0x00, 0x04, 0x63, 0xa1, - 0x50, 0x03, 0x33, 0x80, 0x00, 0x04, 0xa3, 0x80, - 0x00, 0xff, 0xc2, 0x8b, 0x00, 0xd0, 0x04, 0x54, - 0x04, 0xe0, 0x00, 0xc4, 0x20, 0x03, 0x80, 0xc0, - 0x30, 0x00, 0x00, 0x88, 0x00, 0x00, 0x7a, 0x0a, - 0xd0, 0x01, 0x00, 0x82, 0x00, 0x60, 0x00, 0x44, - 0xc0, 0x00, 0x00, 0x99, 0x00, 0x60, 0x00, 0x44, - 0x00, 0xff, 0xc2, 0x8b, 0x20, 0x00, 0x00, 0x80, - 0x00, 0x0d, 0x42, 0x8b, 0x08, 0x32, 0x00, 0xc4, - 0x00, 0x0e, 0x42, 0x8b, 0x00, 0xa2, 0x00, 0xc4, - 0x00, 0x1e, 0x42, 0x8b, 0x0c, 0xb2, 0x00, 0xc4, - 0x00, 0x8e, 0x42, 0x8b, 0x00, 0x62, 0x00, 0xc4, - 0x00, 0x9e, 0x42, 0x8b, 0x08, 0x52, 0x00, 0xc4, - 0x00, 0xbe, 0x42, 0x8b, 0x08, 0x52, 0x00, 0xc4, - 0x00, 0x04, 0x42, 0x8b, 0x04, 0x72, 0x00, 0xc4, - 0x00, 0x24, 0x42, 0x8b, 0x00, 0xd2, 0x00, 0xc4, - 0x00, 0x55, 0x42, 0x8b, 0x00, 0x60, 0x00, 0xc4, - 0x00, 0x00, 0x40, 0x45, 0x20, 0x01, 0x79, 0x80, - 0x00, 0x30, 0x42, 0x8b, 0x08, 0x82, 0x00, 0xc4, - 0x00, 0x00, 0x40, 0x45, 0x00, 0x00, 0x71, 0x8b, - 0x40, 0x01, 0x00, 0x80, 0x00, 0x60, 0x00, 0x44, - 0xff, 0x00, 0xe2, 0xab, 0x00, 0xb2, 0x00, 0xc4, - 0x0f, 0xf2, 0xa8, 0xa8, 0x20, 0x00, 0xb1, 0x88, - 0x00, 0x00, 0x41, 0x02, 0x4d, 0xf2, 0x00, 0x39, - 0xc0, 0x01, 0x00, 0x82, 0x00, 0x60, 0x00, 0x44, - 0x0d, 0xf2, 0xa3, 0xa8, 0x4d, 0xf2, 0x00, 0x39, - 0x00, 0x60, 0x00, 0x44, 0xff, 0x00, 0xe2, 0xab, - 0x20, 0x00, 0x00, 0x88, 0x00, 0x00, 0x61, 0x02, - 0x4d, 0xf2, 0x04, 0x19, 0x00, 0x60, 0x00, 0x44, - 0xff, 0x00, 0xe2, 0xab, 0xa0, 0x00, 0x00, 0x88, - 0x00, 0x00, 0x61, 0x10, 0x4d, 0xf2, 0x04, 0x19, - 0x00, 0x60, 0x00, 0x44, 0xff, 0x20, 0xe2, 0xab, - 0x60, 0x00, 0x00, 0x88, 0x00, 0x00, 0x71, 0xc0, - 0x4d, 0xf2, 0x04, 0x19, 0x00, 0x60, 0x00, 0x44, - 0x00, 0x00, 0x79, 0x80, 0x00, 0xe2, 0x00, 0x84, - 0x03, 0x03, 0x04, 0x49, 0x04, 0xc2, 0x00, 0x54, - 0x00, 0x60, 0x04, 0x64, 0x00, 0x60, 0x00, 0x44, - 0x00, 0x00, 0x63, 0x80, 0x00, 0x00, 0x06, 0x19, - 0x03, 0x00, 0x04, 0x49, 0x00, 0x60, 0x00, 0x44, - 0x20, 0x01, 0x63, 0x80, 0x00, 0x00, 0x06, 0x19, - 0x00, 0x20, 0xe2, 0x8b, 0x0c, 0xf2, 0x00, 0x84, - 0xbe, 0x00, 0x51, 0x8b, 0xc0, 0x20, 0x00, 0x39, - 0x08, 0x01, 0x00, 0x44, 0xec, 0x00, 0x51, 0x8b, - 0xc0, 0x20, 0x00, 0x39, 0x00, 0x02, 0xe2, 0x8b, - 0x04, 0x21, 0x00, 0x84, 0x3f, 0x00, 0x51, 0x8b, - 0xc2, 0x20, 0x00, 0x39, 0x00, 0x11, 0x00, 0x44, - 0x3d, 0x00, 0x51, 0x8b, 0xc2, 0x20, 0x00, 0x39, - 0xe5, 0x00, 0x71, 0x8b, 0xcd, 0x00, 0x00, 0x39, - 0x00, 0x00, 0xb1, 0x80, 0xc9, 0x20, 0x04, 0x19, - 0xcb, 0x20, 0x04, 0x19, 0xc1, 0x20, 0x04, 0x19, - 0xc3, 0x20, 0x04, 0x19, 0x10, 0x00, 0x71, 0x8b, - 0xc7, 0x20, 0x04, 0x19, 0xde, 0x00, 0x51, 0x8b, - 0xcf, 0x00, 0x00, 0x39, 0x00, 0x01, 0xb1, 0x80, - 0xc4, 0x20, 0x04, 0x19, 0xc6, 0x20, 0x04, 0x19, - 0xc8, 0x20, 0x04, 0x19, 0xca, 0x20, 0x04, 0x19, - 0x20, 0x00, 0x71, 0x8b, 0xcc, 0x20, 0x04, 0x19, - 0x03, 0x00, 0x04, 0x49, 0x00, 0x60, 0x00, 0x44, - 0x09, 0x04, 0x61, 0xa8, 0xc1, 0x00, 0x04, 0x19, - 0x0b, 0x04, 0x61, 0xa8, 0xca, 0x00, 0x04, 0x19, - 0x04, 0x60, 0x00, 0xd4, 0x0d, 0x00, 0x61, 0x0a, - 0x90, 0x40, 0x09, 0x8f, 0x00, 0x01, 0x00, 0x45, - 0x0f, 0x00, 0x61, 0x0a, 0x00, 0x40, 0x09, 0x8f, - 0x00, 0x01, 0x00, 0x45, 0x82, 0x00, 0x09, 0x2e, - 0x80, 0x40, 0x09, 0xcf, 0x02, 0x00, 0x61, 0x22, - 0x43, 0x25, 0x61, 0x22, 0x40, 0x33, 0x00, 0x80, - 0x08, 0x48, 0x00, 0x44, 0x20, 0xb1, 0x49, 0x5c, - 0x92, 0x00, 0x09, 0x4e, 0x02, 0x03, 0x09, 0x2e, - 0x00, 0x00, 0xa3, 0x02, 0xc0, 0x00, 0x71, 0xc0, - 0x20, 0x00, 0xeb, 0x80, 0x00, 0x04, 0xc2, 0x8b, - 0x20, 0x04, 0x61, 0x80, 0x00, 0x04, 0x7a, 0x02, - 0xc0, 0x00, 0x00, 0x82, 0x0c, 0xc3, 0x08, 0x49, - 0xb0, 0x01, 0xf3, 0x80, 0x00, 0x00, 0x10, 0x39, - 0x20, 0x00, 0x0c, 0x89, 0x0c, 0x88, 0x08, 0x49, - 0x03, 0x00, 0xa8, 0x18, 0x00, 0x00, 0x10, 0x39, - 0xbd, 0xff, 0x62, 0x8b, 0x20, 0x01, 0x00, 0x80, - 0x00, 0x00, 0x63, 0xcb, 0x00, 0x00, 0x7a, 0x02, - 0x40, 0x00, 0x01, 0x5b, 0x20, 0x00, 0x00, 0x80, - 0x00, 0x00, 0x4a, 0xcb, 0x20, 0x00, 0x13, 0x80, - 0x20, 0x00, 0x7a, 0x80, 0xe0, 0x21, 0x00, 0xc0, - 0x08, 0x00, 0x08, 0x49, 0x10, 0x41, 0x09, 0x8e, - 0xae, 0xae, 0x62, 0x8b, 0x00, 0x04, 0x61, 0x22, - 0x00, 0x03, 0x00, 0x45, 0x22, 0x01, 0x33, 0x80, - 0x20, 0x01, 0xa3, 0x02, 0x00, 0x00, 0x7a, 0x80, - 0xc0, 0x00, 0x00, 0x82, 0x07, 0x20, 0x40, 0x0a, - 0x08, 0xa3, 0x00, 0x84, 0x40, 0x21, 0x00, 0x80, - 0x40, 0x05, 0x93, 0x10, 0xc7, 0x20, 0x00, 0x39, - 0x00, 0x00, 0x40, 0x45, 0x07, 0x20, 0x40, 0x0a, - 0x0c, 0x93, 0x00, 0x84, 0x08, 0x00, 0x00, 0x82, - 0x0c, 0x24, 0x61, 0x50, 0x40, 0x01, 0x00, 0x80, - 0xc7, 0x20, 0x00, 0x39, 0x00, 0x00, 0x40, 0x45, - 0x00, 0x04, 0x63, 0x80, 0x00, 0x00, 0x06, 0x39, - 0x42, 0x01, 0x09, 0x0e, 0x02, 0x20, 0x61, 0x0a, - 0x00, 0x01, 0x00, 0x45, 0x0c, 0x20, 0x60, 0x0a, - 0x00, 0xc3, 0x00, 0x84, 0x00, 0x04, 0xb1, 0x80, - 0x00, 0x00, 0x06, 0x39, 0x0c, 0x61, 0x04, 0xd4, - 0x00, 0x24, 0x71, 0xc0, 0x20, 0x33, 0x33, 0xc0, - 0xe0, 0x01, 0xa3, 0x82, 0x22, 0x03, 0x7a, 0x02, - 0xc3, 0x01, 0xa3, 0x82, 0x20, 0x01, 0x33, 0x80, - 0x00, 0x00, 0x7a, 0x80, 0xc2, 0x01, 0xb3, 0x50, - 0xcc, 0x20, 0x00, 0x39, 0x00, 0x00, 0x71, 0x80, - 0x00, 0x08, 0x00, 0x44, 0x0c, 0x20, 0x60, 0x0a, - 0x00, 0xf3, 0x00, 0x84, 0x00, 0x04, 0xb1, 0x80, - 0x00, 0x00, 0x06, 0x39, 0x0c, 0x61, 0x04, 0xd4, - 0x00, 0x00, 0x71, 0xc0, 0x00, 0x00, 0x93, 0x10, - 0xcc, 0x20, 0x00, 0x39, 0x00, 0x08, 0x00, 0x44, - 0xcc, 0x20, 0x00, 0x39, 0x00, 0x20, 0x00, 0xc0, - 0x00, 0x30, 0x71, 0xc0, 0x00, 0x08, 0x00, 0x44, - 0x20, 0x01, 0x00, 0x80, 0xae, 0xae, 0x62, 0x8b, - 0x20, 0x01, 0x33, 0x80, 0x00, 0x00, 0x83, 0x80, - 0x20, 0x00, 0x7a, 0x80, 0x20, 0xa1, 0x49, 0x5c, - 0x82, 0x00, 0x09, 0x6e, 0x80, 0x4a, 0x09, 0x8e, - 0xe0, 0x01, 0xb3, 0x82, 0x20, 0x04, 0xa3, 0x80, - 0x00, 0x00, 0x7a, 0xcb, 0x28, 0x04, 0xea, 0x10, - 0x0c, 0x04, 0x7a, 0x10, 0x70, 0x00, 0xc0, 0x8b, - 0x00, 0x00, 0x10, 0x39, 0x90, 0x03, 0x00, 0x80, - 0x40, 0x00, 0x21, 0x5b, 0x90, 0x00, 0x61, 0x80, - 0x0c, 0x8a, 0x08, 0x49, 0x00, 0x00, 0x1c, 0x19, - 0x40, 0x00, 0x08, 0x5b, 0x08, 0x00, 0x08, 0x49, - 0x20, 0x02, 0x00, 0x80, 0x03, 0x00, 0xa8, 0x18, - 0x00, 0x00, 0x14, 0x19, 0x40, 0x00, 0x21, 0xcb, - 0x00, 0x00, 0x41, 0x02, 0x00, 0x00, 0xeb, 0x80, - 0xf2, 0x01, 0x00, 0x82, 0x40, 0x21, 0x33, 0x02, - 0x08, 0x20, 0x61, 0x0a, 0xc4, 0x00, 0x04, 0x19, - 0xc7, 0x00, 0x00, 0x99, 0x02, 0x00, 0x61, 0x0a, - 0x0c, 0x0a, 0x04, 0x14, 0x01, 0x00, 0x61, 0x0a, - 0x03, 0x00, 0x48, 0x0a, 0x00, 0x58, 0x04, 0x54, - 0xc3, 0x00, 0x04, 0x19, 0x0c, 0x58, 0x00, 0x44, - 0x08, 0x00, 0xc8, 0x0a, 0x0c, 0x58, 0x04, 0x54, - 0xc8, 0x00, 0x04, 0x19, 0x0a, 0x00, 0x61, 0x0a, - 0x09, 0x00, 0x48, 0x0a, 0x00, 0xc8, 0x04, 0x54, - 0xc9, 0x00, 0x04, 0x19, 0x0c, 0xc8, 0x00, 0x44, - 0x0b, 0x00, 0xc8, 0x0a, 0x0c, 0xc8, 0x04, 0x54, - 0xcb, 0x00, 0x04, 0x19, 0x04, 0x00, 0x61, 0x0a, - 0x06, 0x00, 0x48, 0x0a, 0x00, 0xd8, 0x04, 0x54, - 0xc6, 0x00, 0x04, 0x19, 0x0c, 0xd8, 0x00, 0x44, - 0x05, 0x00, 0xc8, 0x0a, 0x0c, 0xd8, 0x04, 0x54, - 0xc5, 0x00, 0x04, 0x19, 0x07, 0x00, 0x61, 0x0a, - 0x0c, 0x00, 0x48, 0x0a, 0x00, 0x0a, 0x04, 0x54, - 0xcc, 0x00, 0x04, 0x19, 0x0c, 0x0a, 0x00, 0x44, - 0x0e, 0x00, 0xc8, 0x0a, 0x0c, 0x0a, 0x04, 0x54, - 0xce, 0x00, 0x04, 0x19, 0x00, 0x00, 0x40, 0x45, - 0x20, 0x10, 0x71, 0x8b, 0x08, 0x42, 0x06, 0x00 -}; - - -static unsigned char ima_adpcm_init[] = { - 0x00, 0x10, 0x00, 0x44, 0x00, 0x00, 0x40, 0x45, - 0x00, 0x00, 0x40, 0x45, 0x00, 0x00, 0x40, 0x45, - 0x00, 0x00, 0x40, 0x45, 0xaa, 0xaa, 0x71, 0x8b, - 0x44, 0x04, 0x04, 0x19, 0x00, 0x00, 0x40, 0x45, - 0xff, 0x6e, 0x21, 0x49, 0xff, 0x0f, 0xd4, 0x49, - 0x40, 0x49, 0x39, 0xac, 0x55, 0x55, 0x71, 0x8b, - 0x50, 0x05, 0xb1, 0x80, 0x62, 0x00, 0x19, 0x0e, - 0x21, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xb0, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x40, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x60, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x50, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x70, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xc0, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xe0, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xd0, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x02, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x22, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x32, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xa2, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xb2, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x62, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xc2, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xf2, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x11, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xa1, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x61, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xe1, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x13, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xb3, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xc3, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x18, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x68, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x0a, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x4a, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x29, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x79, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x9b, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x14, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xf4, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xe6, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xe5, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xd7, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x2e, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x9d, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xef, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xb2, 0x20, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x33, 0x20, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x2a, 0x20, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x3b, 0x20, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x46, 0x20, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x2c, 0x20, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xdd, 0x20, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x01, 0x10, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x9a, 0x10, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x16, 0x10, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x8e, 0x10, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xc2, 0x30, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xc9, 0x30, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x3c, 0x30, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x81, 0x80, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xd4, 0x80, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x10, 0xa0, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x34, 0xa0, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x02, 0x90, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x75, 0x90, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x9a, 0xb0, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x12, 0x40, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x0d, 0x40, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x3c, 0x60, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xe7, 0x50, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x0e, 0x70, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xff, 0xc0, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xc8, 0xd0, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x57, 0xf0, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xc8, 0x22, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xb0, 0x32, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xdd, 0x82, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x90, 0xb2, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x8a, 0x62, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xce, 0x72, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xa5, 0xd2, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x97, 0x21, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xa2, 0xa1, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x5c, 0x41, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xfe, 0xc1, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x7a, 0x23, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x78, 0x93, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x67, 0x73, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x17, 0x28, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x88, 0x48, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xdb, 0xf8, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x2b, 0xba, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xf1, 0x09, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xdc, 0x69, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x19, 0x8b, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0xff, 0xfb, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x20, 0x00, 0x71, 0x8b, 0x88, 0x00, 0x00, 0x80, - 0x52, 0x00, 0x71, 0x8b, 0xc2, 0x00, 0x00, 0x82, - 0xff, 0xff, 0x71, 0x8b, 0xc2, 0x00, 0x00, 0x82, - 0xc2, 0x00, 0x00, 0x82, 0xc2, 0x00, 0x00, 0x82, - 0xc2, 0x00, 0x00, 0x82, 0x10, 0x00, 0x71, 0x8b, - 0xc2, 0x00, 0x00, 0x82, 0x80, 0x00, 0x71, 0x8b, - 0xc2, 0x00, 0x00, 0x82, 0x90, 0x00, 0x71, 0x8b, - 0xc2, 0x00, 0x00, 0x82, 0x40, 0x00, 0x71, 0x8b, - 0xc2, 0x00, 0x00, 0x82, 0xff, 0xff, 0x71, 0x8b, - 0xc2, 0x00, 0x00, 0x82, 0xc2, 0x00, 0x00, 0x82, - 0xc2, 0x00, 0x00, 0x82, 0xc2, 0x00, 0x00, 0x82, - 0x10, 0x00, 0x71, 0x8b, 0xc2, 0x00, 0x00, 0x82, - 0x80, 0x00, 0x71, 0x8b, 0xc2, 0x00, 0x00, 0x82, - 0x90, 0x00, 0x71, 0x8b, 0xc2, 0x00, 0x00, 0x82, - 0x40, 0x00, 0x71, 0x8b, 0xc2, 0x00, 0x00, 0x82, - 0xff, 0xfb, 0x71, 0x8b, 0xc2, 0x00, 0x00, 0x82, - 0x00, 0x04, 0x71, 0x8b, 0xc2, 0x00, 0x00, 0x82, - 0x4a, 0x00, 0x71, 0x8b, 0xc2, 0x00, 0x00, 0x82, - 0x00, 0x00, 0x71, 0x8b, 0xc2, 0x00, 0x00, 0x82, - 0x00, 0x00, 0x71, 0x8b, 0xc2, 0x00, 0x00, 0x82, - 0xc2, 0x00, 0x00, 0x82, 0xc2, 0x30, 0x04, 0x19, - 0x10, 0x00, 0x09, 0x4f, 0xc2, 0x01, 0x00, 0x82, - 0xc2, 0x01, 0x00, 0x82, 0xc2, 0x01, 0x00, 0x82, - 0xc2, 0x01, 0x00, 0x82, 0xc2, 0x01, 0x00, 0x82, - 0xc2, 0x01, 0x00, 0x82, 0xc2, 0x01, 0x00, 0x82, - 0xc2, 0x01, 0x00, 0x82, 0xc2, 0x01, 0x00, 0x82, - 0xc2, 0x01, 0x00, 0x82, 0xc2, 0x01, 0x00, 0x82, - 0xc2, 0x01, 0x00, 0x82, 0xc2, 0x01, 0x00, 0x82, - 0x00, 0x10, 0x71, 0x8b, 0xc1, 0x30, 0x04, 0x19, - 0x93, 0x00, 0x01, 0x4f, 0xcd, 0x30, 0x00, 0x09, - 0xcf, 0x30, 0x00, 0x09, 0x00, 0x00, 0x34, 0x49, - 0x00, 0x08, 0x00, 0x44, 0xc8, 0x54, 0x11, 0x00 -}; - -static unsigned char ima_adpcm_playback[] = { - 0x00, 0x10, 0x00, 0x44, 0x08, 0x00, 0x00, 0x44, - 0x0c, 0x50, 0x00, 0x44, 0x00, 0x70, 0x00, 0x44, - 0x04, 0x70, 0x00, 0x44, 0x0d, 0xf2, 0x61, 0xa8, - 0x44, 0x04, 0x04, 0x19, 0x00, 0x00, 0x40, 0x45, - 0x00, 0x04, 0x63, 0x80, 0x00, 0x00, 0x06, 0x39, - 0xff, 0x2e, 0x21, 0x49, 0xff, 0x0d, 0xd4, 0x49, - 0x40, 0x49, 0x39, 0xac, 0x55, 0x55, 0x71, 0x8b, - 0x50, 0x01, 0xb1, 0x80, 0x00, 0x01, 0xb1, 0x80, - 0xc9, 0x20, 0x04, 0x19, 0x51, 0x00, 0x71, 0x8b, - 0xcd, 0x00, 0x04, 0x19, 0xe4, 0x20, 0x71, 0x8b, - 0xcf, 0x00, 0x04, 0x19, 0x80, 0x00, 0x71, 0x8b, - 0xcb, 0x20, 0x04, 0x19, 0x10, 0x00, 0x71, 0x8b, - 0xc4, 0x20, 0x04, 0x19, 0x65, 0x00, 0x51, 0x8b, - 0xc2, 0x20, 0x00, 0x39, 0x00, 0x00, 0xb1, 0x80, - 0xc2, 0x30, 0x04, 0x19, 0x00, 0x00, 0x63, 0x80, - 0xc1, 0xa0, 0x04, 0x19, 0x93, 0x00, 0x01, 0x4f, - 0xcd, 0x30, 0x00, 0x09, 0xcf, 0x30, 0x00, 0x09, - 0x04, 0x40, 0x00, 0x14, 0x0c, 0x40, 0x00, 0x14, - 0x00, 0x04, 0x61, 0xa8, 0x02, 0x04, 0x61, 0xa8, - 0x04, 0x60, 0x04, 0x24, 0x00, 0x00, 0x34, 0x49, - 0x00, 0x50, 0x00, 0x44, 0x44, 0x04, 0x04, 0x39, - 0x00, 0x00, 0x40, 0x45, 0x00, 0x00, 0x40, 0x45, - 0x0f, 0x00, 0x61, 0x0a, 0x00, 0x01, 0x00, 0x45, - 0x40, 0x40, 0x09, 0xef, 0xff, 0x20, 0x09, 0xcf, - 0x00, 0x04, 0x63, 0xa1, 0x50, 0x03, 0x33, 0x80, - 0x00, 0x04, 0xa3, 0x80, 0x00, 0xff, 0xc2, 0x8b, - 0x08, 0xf0, 0x04, 0x54, 0x0c, 0xd0, 0x00, 0xc4, - 0x20, 0x03, 0x80, 0xc0, 0x30, 0x00, 0x00, 0x88, - 0x00, 0x00, 0x7a, 0x0a, 0xd0, 0x01, 0x00, 0x82, - 0x08, 0x50, 0x00, 0x44, 0xc0, 0x00, 0x00, 0x99, - 0x08, 0x50, 0x00, 0x44, 0x00, 0xff, 0xc2, 0x8b, - 0x20, 0x00, 0x00, 0x80, 0x00, 0x0d, 0x42, 0x8b, - 0x00, 0xa2, 0x00, 0xc4, 0x00, 0x0e, 0x42, 0x8b, - 0x0c, 0x92, 0x00, 0xc4, 0x00, 0x1e, 0x42, 0x8b, - 0x04, 0x62, 0x00, 0xc4, 0x00, 0x8e, 0x42, 0x8b, - 0x0c, 0x52, 0x00, 0xc4, 0x00, 0x9e, 0x42, 0x8b, - 0x00, 0xc2, 0x00, 0xc4, 0x00, 0xbe, 0x42, 0x8b, - 0x00, 0xc2, 0x00, 0xc4, 0x00, 0x04, 0x42, 0x8b, - 0x00, 0xf2, 0x00, 0xc4, 0x00, 0x24, 0x42, 0x8b, - 0x00, 0x91, 0x00, 0xc4, 0x00, 0x55, 0x42, 0x8b, - 0x08, 0x50, 0x00, 0xc4, 0x00, 0x3f, 0x42, 0x8b, - 0x08, 0xe2, 0x00, 0xc4, 0x00, 0x00, 0x40, 0x45, - 0x20, 0x01, 0x79, 0x80, 0x00, 0x30, 0x42, 0x8b, - 0x00, 0x92, 0x00, 0xc4, 0x00, 0x00, 0x40, 0x45, - 0x00, 0x00, 0x71, 0x8b, 0x40, 0x01, 0x00, 0x80, - 0x08, 0x50, 0x00, 0x44, 0xff, 0x00, 0xe2, 0xab, - 0x0c, 0x42, 0x00, 0xc4, 0x0f, 0xf2, 0xa8, 0xa8, - 0x20, 0x00, 0xb1, 0x88, 0x00, 0x00, 0x41, 0x02, - 0x4d, 0xf2, 0x00, 0x39, 0xc0, 0x01, 0x00, 0x82, - 0x08, 0x50, 0x00, 0x44, 0x0d, 0xf2, 0xa3, 0xa8, - 0x4d, 0xf2, 0x00, 0x39, 0x08, 0x50, 0x00, 0x44, - 0xff, 0x00, 0xe2, 0xab, 0x20, 0x00, 0x00, 0x88, - 0x00, 0x00, 0x61, 0x02, 0x4d, 0xf2, 0x04, 0x19, - 0x08, 0x50, 0x00, 0x44, 0xff, 0x00, 0xe2, 0xab, - 0xa0, 0x00, 0x00, 0x88, 0x00, 0x00, 0x61, 0x10, - 0x4d, 0xf2, 0x04, 0x19, 0x08, 0x50, 0x00, 0x44, - 0xff, 0x20, 0xe2, 0xab, 0x60, 0x00, 0x00, 0x88, - 0x00, 0x00, 0x71, 0xc0, 0x4d, 0xf2, 0x04, 0x19, - 0x08, 0x50, 0x00, 0x44, 0x00, 0x00, 0x7a, 0x0a, - 0x20, 0x01, 0xf0, 0x80, 0x01, 0xa0, 0x41, 0x0a, - 0x04, 0xd2, 0x00, 0xc4, 0x20, 0x01, 0xf0, 0x80, - 0xc1, 0x30, 0x04, 0x19, 0x08, 0x50, 0x00, 0x44, - 0x00, 0x00, 0x79, 0x80, 0x00, 0xa1, 0x00, 0x84, - 0xb5, 0x00, 0x51, 0x8b, 0xcf, 0x00, 0x00, 0x39, - 0x00, 0x01, 0xb1, 0x80, 0x88, 0x00, 0x04, 0x19, - 0x8a, 0x00, 0x04, 0x19, 0xc8, 0x20, 0x04, 0x19, - 0xca, 0x20, 0x04, 0x19, 0xc2, 0x30, 0x04, 0x19, - 0xcd, 0x10, 0x04, 0x19, 0xcf, 0x10, 0x04, 0x19, - 0xb0, 0x00, 0x71, 0x8b, 0x8c, 0x00, 0x04, 0x19, - 0x8e, 0x00, 0x04, 0x19, 0x10, 0x00, 0x71, 0x8b, - 0xc4, 0x20, 0x04, 0x19, 0x93, 0x00, 0x01, 0x4f, - 0xcd, 0x30, 0x00, 0x09, 0xcf, 0x30, 0x00, 0x09, - 0x03, 0x03, 0x04, 0x49, 0x04, 0x81, 0x00, 0x54, - 0x08, 0x50, 0x04, 0x64, 0x08, 0x50, 0x00, 0x44, - 0x00, 0x00, 0x63, 0x80, 0x00, 0x00, 0x06, 0x19, - 0x03, 0x00, 0x04, 0x49, 0x08, 0x50, 0x00, 0x44, - 0x20, 0x01, 0x63, 0x80, 0x00, 0x00, 0x06, 0x19, - 0x00, 0x02, 0xe2, 0x8b, 0x08, 0x41, 0x00, 0x84, - 0x65, 0x00, 0x51, 0x8b, 0xc2, 0x20, 0x00, 0x39, - 0x00, 0x00, 0x63, 0x80, 0xc1, 0xa0, 0x04, 0x19, - 0x08, 0x61, 0x00, 0x44, 0x2d, 0x00, 0x51, 0x8b, - 0xc2, 0x20, 0x00, 0x39, 0x00, 0x00, 0xb1, 0x80, - 0xc1, 0xa0, 0x04, 0x19, 0x03, 0x00, 0x04, 0x49, - 0x08, 0x50, 0x00, 0x44, 0x02, 0x20, 0x61, 0x0a, - 0x00, 0x01, 0x00, 0x45, 0x02, 0x30, 0x61, 0x0a, - 0x04, 0x03, 0x00, 0xc4, 0x05, 0xb0, 0xc8, 0x18, - 0x04, 0x71, 0x00, 0xc4, 0x00, 0x13, 0x00, 0x44, - 0x00, 0x79, 0x08, 0x44, 0x00, 0x04, 0x79, 0x80, - 0x00, 0x49, 0x00, 0xc4, 0xca, 0x20, 0x04, 0x19, - 0x4a, 0x04, 0x04, 0x19, 0xff, 0x00, 0xe2, 0x8b, - 0x0c, 0xf9, 0x08, 0x44, 0xcf, 0x10, 0x04, 0x19, - 0x0c, 0x2b, 0x08, 0x44, 0x8e, 0x00, 0x04, 0x19, - 0x03, 0x30, 0x61, 0x0a, 0xc8, 0x20, 0x00, 0x39, - 0x48, 0x04, 0x00, 0x39, 0x0a, 0x30, 0x61, 0x0a, - 0x0c, 0xf9, 0x08, 0x44, 0xcd, 0x10, 0x04, 0x19, - 0x0c, 0x2b, 0x08, 0x44, 0x8c, 0x00, 0x04, 0x19, - 0x0c, 0xd9, 0x08, 0x44, 0x0c, 0x5a, 0x00, 0x44, - 0x00, 0x79, 0x08, 0x44, 0x00, 0x04, 0x79, 0x80, - 0x00, 0x49, 0x00, 0xc4, 0xc3, 0x30, 0x04, 0x19, - 0xca, 0x30, 0x00, 0x99, 0x0c, 0xd9, 0x08, 0x44, - 0x42, 0x0a, 0x09, 0x0e, 0x00, 0x01, 0x33, 0x11, - 0x8c, 0x01, 0xa3, 0x80, 0x00, 0x01, 0x7a, 0x10, - 0x80, 0x05, 0xb1, 0x80, 0x05, 0xb0, 0xe0, 0x18, - 0x00, 0x93, 0x00, 0x84, 0x00, 0x79, 0x08, 0x44, - 0x00, 0x04, 0x79, 0x80, 0x00, 0x49, 0x00, 0xc4, - 0x0c, 0x1b, 0x08, 0x44, 0x88, 0x00, 0x04, 0x19, - 0x8a, 0x00, 0x00, 0x99, 0x0c, 0xd9, 0x08, 0x44, - 0x42, 0x0a, 0x09, 0x0e, 0x80, 0x00, 0x71, 0x8b, - 0xc0, 0x04, 0xb1, 0x82, 0x10, 0x00, 0xe0, 0x0b, - 0x00, 0x43, 0x00, 0x84, 0x02, 0x30, 0x61, 0x0a, - 0x01, 0x30, 0xc8, 0x0a, 0x00, 0x43, 0x00, 0x84, - 0x00, 0x00, 0xb1, 0x80, 0xc2, 0x30, 0x04, 0x19, - 0x0c, 0xa8, 0x00, 0x44, 0x02, 0x30, 0x61, 0x0a, - 0x00, 0xd3, 0x00, 0xc4, 0x05, 0xb0, 0xc8, 0x18, - 0x04, 0x63, 0x00, 0xc4, 0x08, 0xf3, 0x00, 0x44, - 0x00, 0x79, 0x08, 0x44, 0x00, 0x04, 0x79, 0x80, - 0x00, 0x49, 0x00, 0xc4, 0x20, 0x00, 0x04, 0x19, - 0xff, 0x00, 0xe2, 0x8b, 0x0c, 0xf9, 0x08, 0x44, - 0xcd, 0x10, 0x04, 0x19, 0xcf, 0x10, 0x04, 0x19, - 0x0c, 0x2b, 0x08, 0x44, 0x8c, 0x00, 0x04, 0x19, - 0x8e, 0x00, 0x04, 0x19, 0x03, 0x30, 0x61, 0x0a, - 0xc8, 0x20, 0x00, 0x39, 0xca, 0x20, 0x00, 0x39, - 0x48, 0x04, 0x00, 0x39, 0x4a, 0x04, 0x00, 0x39, - 0x0c, 0xd9, 0x08, 0x44, 0x0c, 0x5a, 0x00, 0x44, - 0x00, 0x79, 0x08, 0x44, 0x00, 0x04, 0x79, 0x80, - 0x00, 0x49, 0x00, 0xc4, 0xc3, 0x30, 0x04, 0x19, - 0x0c, 0xd9, 0x08, 0x44, 0x42, 0x0a, 0x09, 0x0e, - 0x05, 0xb0, 0xe0, 0x18, 0x00, 0x18, 0x00, 0x84, - 0x00, 0x79, 0x08, 0x44, 0x00, 0x04, 0x79, 0x80, - 0x00, 0x49, 0x00, 0xc4, 0x0c, 0x1b, 0x08, 0x44, - 0x80, 0x01, 0x00, 0x80, 0x0c, 0xd9, 0x08, 0x44, - 0x42, 0x0a, 0x09, 0x0e, 0x80, 0x00, 0x71, 0x8b, - 0xc0, 0x04, 0xb1, 0x82, 0x10, 0x00, 0xe0, 0x0b, - 0x00, 0x88, 0x00, 0x84, 0x02, 0x30, 0x61, 0x0a, - 0x01, 0x30, 0xc8, 0x0a, 0x00, 0x88, 0x00, 0x84, - 0x00, 0x00, 0xb1, 0x80, 0xc2, 0x30, 0x04, 0x19, - 0x00, 0x01, 0x00, 0x11, 0x00, 0x0f, 0xe2, 0x8b, - 0x00, 0x00, 0x41, 0xcb, 0x8c, 0x00, 0x00, 0x80, - 0x00, 0x00, 0x48, 0xcb, 0x20, 0x00, 0x7a, 0x80, - 0x80, 0x01, 0x00, 0x80, 0x82, 0x0c, 0x09, 0x6e, - 0x03, 0x08, 0x09, 0x0e, 0x80, 0x40, 0x09, 0xcf, - 0x00, 0x01, 0x71, 0xc2, 0x00, 0x08, 0xc2, 0x1b, - 0x04, 0xb8, 0x00, 0xc4, 0x20, 0x05, 0xa8, 0x80, - 0x20, 0x01, 0xf0, 0x80, 0x00, 0x01, 0xc2, 0x1b, - 0x04, 0x48, 0x00, 0xc4, 0x20, 0x05, 0xa8, 0x80, - 0x20, 0x01, 0xf0, 0x80, 0x00, 0x02, 0xc2, 0x1b, - 0x04, 0x68, 0x00, 0xc4, 0x20, 0x05, 0xa8, 0x80, - 0x20, 0x01, 0xf0, 0x80, 0x20, 0x03, 0xa8, 0x80, - 0x00, 0x01, 0x00, 0x11, 0x00, 0x04, 0xc2, 0x8b, - 0x08, 0x78, 0x00, 0xc4, 0x00, 0x00, 0xe9, 0x80, - 0x05, 0xb0, 0xa8, 0x18, 0x00, 0x00, 0x4a, 0xcb, - 0x20, 0x00, 0xa8, 0x22, 0xd0, 0x01, 0x00, 0x82, - 0x40, 0x01, 0x00, 0x80, 0xc4, 0x00, 0x04, 0x19, - 0xb0, 0x00, 0xe2, 0x8b, 0x06, 0x20, 0xa8, 0x0a, - 0x2d, 0x10, 0x61, 0x0a, 0xd1, 0x08, 0x09, 0x2e, - 0x00, 0x01, 0xa8, 0x02, 0x0c, 0xf9, 0x08, 0x44, - 0xcd, 0x10, 0x04, 0x19, 0x0c, 0x2b, 0x08, 0x44, - 0x03, 0x08, 0x09, 0x0e, 0x9a, 0x25, 0xb1, 0x60, - 0xa2, 0x0e, 0x09, 0x6e, 0x03, 0x00, 0x09, 0x0f, - 0x00, 0x01, 0x71, 0x82, 0x20, 0x01, 0x00, 0x80, - 0x00, 0x00, 0x61, 0xcb, 0x80, 0x01, 0x00, 0x80, - 0x03, 0x00, 0x09, 0x0f, 0x00, 0x01, 0x71, 0xc2, - 0x00, 0x08, 0xc2, 0x1b, 0x0c, 0x2a, 0x00, 0xc4, - 0x20, 0x05, 0xa8, 0x80, 0x20, 0x01, 0xf0, 0x80, - 0x00, 0x01, 0xc2, 0x1b, 0x0c, 0x1a, 0x00, 0xc4, - 0x20, 0x05, 0xa8, 0x80, 0x20, 0x01, 0xf0, 0x80, - 0x00, 0x02, 0xc2, 0x1b, 0x0c, 0x3a, 0x00, 0xc4, - 0x20, 0x05, 0xa8, 0x80, 0x20, 0x01, 0xf0, 0x80, - 0x20, 0x03, 0xa8, 0x80, 0x00, 0x01, 0x00, 0x11, - 0x00, 0x04, 0xc2, 0x8b, 0x04, 0xaa, 0x00, 0xc4, - 0x00, 0x00, 0xe9, 0x80, 0x05, 0xb0, 0xa8, 0x18, - 0x00, 0x00, 0x4a, 0xcb, 0x20, 0x00, 0xa8, 0x22, - 0xd0, 0x01, 0x00, 0x82, 0x40, 0x01, 0x00, 0x80, - 0xc7, 0x00, 0x04, 0x19, 0xb0, 0x00, 0xe2, 0x8b, - 0x06, 0x20, 0xa8, 0x0a, 0x2f, 0x10, 0x61, 0x0a, - 0xf1, 0x08, 0x09, 0x2e, 0x00, 0x01, 0xa8, 0x02, - 0x0c, 0xf9, 0x08, 0x44, 0xcf, 0x10, 0x04, 0x19, - 0x0c, 0x2b, 0x08, 0x44, 0x9f, 0x35, 0xb1, 0x60, - 0x03, 0x08, 0x09, 0x0e, 0x00, 0x01, 0x71, 0x82, - 0x20, 0x01, 0x00, 0x80, 0x00, 0x00, 0x61, 0xcb, - 0x80, 0x01, 0x00, 0x80, 0xe4, 0x20, 0x71, 0x8b, - 0x00, 0x01, 0x00, 0x45, 0x90, 0x40, 0x09, 0x8f, - 0x00, 0x05, 0x63, 0x80, 0x00, 0x00, 0x06, 0x39, - 0x08, 0x19, 0x04, 0xd4, 0x93, 0x00, 0x01, 0x4f, - 0xe7, 0x00, 0x01, 0x6f, 0x0d, 0x30, 0x61, 0x0a, - 0x20, 0x04, 0x61, 0xa8, 0xc2, 0x00, 0x00, 0x82, - 0x02, 0x04, 0x61, 0xa8, 0xc2, 0x00, 0x00, 0x82, - 0xcd, 0x30, 0x00, 0x09, 0x02, 0x00, 0x00, 0x02, - 0x02, 0x00, 0x00, 0x02, 0xc0, 0x80, 0x00, 0x09, - 0x20, 0x00, 0x09, 0x49, 0x0f, 0x30, 0x61, 0x0a, - 0x0d, 0x30, 0xc8, 0x0a, 0x00, 0x29, 0x00, 0xc4, - 0x00, 0x80, 0xc8, 0x0a, 0x00, 0x29, 0x00, 0xc4, - 0x00, 0x04, 0xb1, 0x80, 0x00, 0x00, 0x06, 0x39, - 0xc9, 0x20, 0x04, 0x39, 0x00, 0x39, 0x00, 0x44, - 0x00, 0x04, 0x63, 0x80, 0x00, 0x00, 0x06, 0x39, - 0x00, 0x04, 0xb1, 0x80, 0xc9, 0x20, 0x04, 0x39, - 0x00, 0x39, 0x00, 0x44, 0x09, 0x20, 0x23, 0x0a, - 0x00, 0x00, 0x06, 0x19, 0xc9, 0x20, 0x04, 0x19, - 0x00, 0x00, 0x40, 0x45, 0x02, 0x00, 0x61, 0x0a, - 0x0c, 0xb9, 0x04, 0x14, 0x04, 0x00, 0x61, 0x0a, - 0x06, 0x00, 0x48, 0x0a, 0x00, 0xa9, 0x04, 0x54, - 0xc6, 0x00, 0x04, 0x19, 0x0c, 0xa9, 0x00, 0x44, - 0x05, 0x00, 0xc8, 0x0a, 0x0c, 0xa9, 0x04, 0x54, - 0xc5, 0x00, 0x04, 0x19, 0x07, 0x00, 0x61, 0x0a, - 0x0c, 0x00, 0x48, 0x0a, 0x00, 0xb9, 0x04, 0x54, - 0xcc, 0x00, 0x04, 0x19, 0x0c, 0xb9, 0x00, 0x44, - 0x0e, 0x00, 0xc8, 0x0a, 0x0c, 0xb9, 0x04, 0x54, - 0xce, 0x00, 0x04, 0x19, 0x0c, 0x5a, 0x00, 0x44, - 0x82, 0x0d, 0x09, 0x2e, 0x80, 0x40, 0x09, 0xcf, - 0x00, 0xdf, 0x71, 0x8b, 0x80, 0x01, 0x00, 0x80, - 0x02, 0xc1, 0x00, 0x22, 0x03, 0xc1, 0x00, 0x22, - 0x00, 0x01, 0x65, 0x80, 0xd2, 0x05, 0x65, 0x82, - 0x40, 0x21, 0x00, 0x80, 0xd3, 0x03, 0x00, 0x82, - 0x40, 0x33, 0x00, 0x80, 0x0c, 0x5a, 0x00, 0x44, - 0x0f, 0x30, 0x61, 0x0a, 0x0d, 0x30, 0xc8, 0x0a, - 0x08, 0xd9, 0x00, 0xc4, 0x93, 0x00, 0x01, 0x4f, - 0xe7, 0x00, 0x01, 0x6f, 0x0f, 0x30, 0x61, 0x0a, - 0x20, 0x00, 0x00, 0x88, 0x02, 0x00, 0x61, 0x02, - 0x02, 0x00, 0x00, 0x03, 0xcf, 0x30, 0x00, 0x09, - 0x20, 0x00, 0x09, 0x49, 0x00, 0x04, 0x63, 0x80, - 0x04, 0xd9, 0x00, 0x44, 0x00, 0x04, 0xb1, 0x80, - 0x00, 0x00, 0x00, 0x46, 0x02, 0x30, 0x61, 0x0a, - 0x05, 0xb0, 0xa8, 0x18, 0xc2, 0x30, 0x04, 0x19, - 0x00, 0x00, 0x00, 0x46, 0x0e, 0x10, 0xc8, 0x0a, - 0x0c, 0x0b, 0x04, 0x14, 0x0e, 0x10, 0x61, 0x0a, - 0x04, 0x2b, 0x00, 0x44, 0x0c, 0x10, 0xc8, 0x0a, - 0x04, 0x2b, 0x04, 0x54, 0x0c, 0x10, 0x61, 0x0a, - 0x00, 0x00, 0x00, 0x46, 0x00, 0x10, 0xa8, 0x18, - 0xa0, 0x00, 0x00, 0x88, 0x00, 0x01, 0x71, 0x82, - 0x00, 0x00, 0x00, 0x46, 0x00, 0x04, 0x33, 0x80, - 0x00, 0x00, 0x83, 0x80, 0x20, 0x04, 0x7a, 0x80, - 0x20, 0x01, 0x33, 0x80, 0x00, 0x00, 0x83, 0x80, - 0x20, 0x00, 0x7a, 0x80, 0x20, 0x03, 0x00, 0x80, - 0x00, 0x00, 0x00, 0x46, 0x16, 0xce, 0x11, 0x00 -}; - -static unsigned char ima_adpcm_capture[] = { - 0x00, 0x10, 0x00, 0x44, 0x08, 0x00, 0x00, 0x44, - 0x00, 0x70, 0x00, 0x44, 0x08, 0xd0, 0x00, 0x44, - 0x00, 0xf0, 0x00, 0x44, 0x0d, 0xf2, 0x61, 0xa8, - 0x44, 0x04, 0x04, 0x19, 0x00, 0x00, 0x40, 0x45, - 0x00, 0x04, 0x63, 0x80, 0x00, 0x00, 0x06, 0x39, - 0xff, 0x2e, 0x21, 0x49, 0xff, 0x0c, 0xd4, 0x49, - 0x40, 0x49, 0x39, 0xac, 0x55, 0x55, 0x71, 0x8b, - 0x50, 0x01, 0xb1, 0x80, 0x00, 0x00, 0x71, 0x8b, - 0xc2, 0x30, 0x04, 0x19, 0xc0, 0xa0, 0x04, 0x19, - 0xc2, 0xa0, 0x04, 0x19, 0x89, 0x00, 0x71, 0x8b, - 0xc8, 0x30, 0x04, 0x19, 0x71, 0x00, 0x71, 0x8b, - 0xcd, 0x00, 0x04, 0x19, 0xcf, 0x00, 0x04, 0x19, - 0x80, 0x00, 0x71, 0x8b, 0xcb, 0x20, 0x04, 0x19, - 0x20, 0x00, 0x71, 0x8b, 0xc4, 0x20, 0x04, 0x19, - 0x47, 0x00, 0x51, 0x8b, 0xc0, 0x20, 0x00, 0x39, - 0x00, 0x00, 0x63, 0x80, 0xc1, 0xa0, 0x04, 0x19, - 0x93, 0x00, 0x01, 0x4f, 0xcd, 0x30, 0x00, 0x09, - 0xcf, 0x30, 0x00, 0x09, 0x0c, 0x40, 0x00, 0x14, - 0x00, 0x60, 0x00, 0x14, 0x00, 0x04, 0x61, 0xa8, - 0x02, 0x04, 0x61, 0xa8, 0x0c, 0x60, 0x04, 0x24, - 0x00, 0x00, 0x34, 0x49, 0x08, 0x50, 0x00, 0x44, - 0x44, 0x04, 0x04, 0x39, 0x00, 0x00, 0x40, 0x45, - 0x08, 0x30, 0x61, 0x0a, 0x05, 0xb0, 0xe8, 0x18, - 0x0c, 0xc0, 0x04, 0x54, 0xc8, 0x30, 0x04, 0x19, - 0x09, 0x04, 0x00, 0xa8, 0x0b, 0x04, 0x00, 0xa8, - 0x00, 0x00, 0x40, 0x45, 0x09, 0x04, 0x61, 0xa8, - 0xc1, 0x00, 0x04, 0x19, 0x0b, 0x04, 0x61, 0xa8, - 0xca, 0x00, 0x04, 0x19, 0x0d, 0x00, 0x61, 0x0a, - 0x00, 0x01, 0x00, 0x45, 0x0f, 0x00, 0x61, 0x0a, - 0x00, 0x40, 0x09, 0x8f, 0x00, 0x01, 0x00, 0x45, - 0x40, 0x40, 0x09, 0xef, 0xff, 0x20, 0x09, 0xcf, - 0x00, 0x04, 0x63, 0xa1, 0x50, 0x03, 0x33, 0x80, - 0x00, 0x04, 0xa3, 0x80, 0x00, 0xff, 0xc2, 0x8b, - 0x0c, 0x12, 0x04, 0x54, 0x08, 0x12, 0x00, 0xc4, - 0x20, 0x03, 0x80, 0xc0, 0x30, 0x00, 0x00, 0x88, - 0x00, 0x00, 0x7a, 0x0a, 0xd0, 0x01, 0x00, 0x82, - 0x04, 0x50, 0x00, 0x44, 0xc0, 0x00, 0x00, 0x99, - 0x04, 0x50, 0x00, 0x44, 0x00, 0xff, 0xc2, 0x8b, - 0x20, 0x00, 0x00, 0x80, 0x00, 0x0d, 0x42, 0x8b, - 0x04, 0x42, 0x00, 0xc4, 0x00, 0x0e, 0x42, 0x8b, - 0x08, 0x52, 0x00, 0xc4, 0x00, 0x1e, 0x42, 0x8b, - 0x00, 0xe2, 0x00, 0xc4, 0x00, 0x8e, 0x42, 0x8b, - 0x08, 0xd2, 0x00, 0xc4, 0x00, 0x9e, 0x42, 0x8b, - 0x04, 0xf2, 0x00, 0xc4, 0x00, 0xbe, 0x42, 0x8b, - 0x04, 0xf2, 0x00, 0xc4, 0x00, 0x04, 0x42, 0x8b, - 0x04, 0x11, 0x00, 0xc4, 0x00, 0x24, 0x42, 0x8b, - 0x0c, 0x61, 0x00, 0xc4, 0x00, 0x55, 0x42, 0x8b, - 0x04, 0x50, 0x00, 0xc4, 0x00, 0x3f, 0x42, 0x8b, - 0x0c, 0x01, 0x00, 0xc4, 0x00, 0x00, 0x40, 0x45, - 0x20, 0x01, 0x79, 0x80, 0x00, 0x30, 0x42, 0x8b, - 0x04, 0x62, 0x00, 0xc4, 0x00, 0x00, 0x40, 0x45, - 0x00, 0x00, 0x71, 0x8b, 0x40, 0x01, 0x00, 0x80, - 0x04, 0x50, 0x00, 0x44, 0xff, 0x00, 0xe2, 0xab, - 0x08, 0xc2, 0x00, 0xc4, 0x0f, 0xf2, 0xa8, 0xa8, - 0x20, 0x00, 0xb1, 0x88, 0x00, 0x00, 0x41, 0x02, - 0x4d, 0xf2, 0x00, 0x39, 0xc0, 0x01, 0x00, 0x82, - 0x04, 0x50, 0x00, 0x44, 0x0d, 0xf2, 0xa3, 0xa8, - 0x4d, 0xf2, 0x00, 0x39, 0x04, 0x50, 0x00, 0x44, - 0xff, 0x00, 0xe2, 0xab, 0x20, 0x00, 0x00, 0x88, - 0x00, 0x00, 0x61, 0x02, 0x4d, 0xf2, 0x04, 0x19, - 0x04, 0x50, 0x00, 0x44, 0xff, 0x00, 0xe2, 0xab, - 0xa0, 0x00, 0x00, 0x88, 0x00, 0x00, 0x61, 0x10, - 0x4d, 0xf2, 0x04, 0x19, 0x04, 0x50, 0x00, 0x44, - 0xff, 0x20, 0xe2, 0xab, 0x60, 0x00, 0x00, 0x88, - 0x00, 0x00, 0x71, 0xc0, 0x4d, 0xf2, 0x04, 0x19, - 0x04, 0x50, 0x00, 0x44, 0x00, 0x00, 0x7a, 0x0a, - 0x20, 0x01, 0xf0, 0x80, 0x01, 0xa0, 0x41, 0x0a, - 0x00, 0x11, 0x00, 0xc4, 0x20, 0x01, 0xf0, 0x80, - 0xc1, 0x30, 0x04, 0x19, 0x04, 0x50, 0x00, 0x44, - 0x00, 0x00, 0x79, 0x80, 0x0c, 0x41, 0x00, 0x84, - 0x89, 0x00, 0x71, 0x8b, 0xc8, 0x30, 0x04, 0x19, - 0x97, 0x00, 0x71, 0x8b, 0xcd, 0x00, 0x00, 0x39, - 0x00, 0x01, 0xb1, 0x80, 0x80, 0x00, 0x04, 0x19, - 0x82, 0x00, 0x04, 0x19, 0xc1, 0x20, 0x04, 0x19, - 0xc3, 0x20, 0x04, 0x19, 0xc2, 0x30, 0x04, 0x19, - 0xcd, 0x10, 0x04, 0x19, 0xcf, 0x10, 0x04, 0x19, - 0xb0, 0x00, 0x71, 0x8b, 0x84, 0x00, 0x04, 0x19, - 0x86, 0x00, 0x04, 0x19, 0x80, 0x00, 0x71, 0x8b, - 0xcb, 0x20, 0x04, 0x19, 0x93, 0x00, 0x01, 0x4f, - 0xcd, 0x30, 0x00, 0x09, 0xcf, 0x30, 0x00, 0x09, - 0x03, 0x02, 0x04, 0x49, 0x08, 0x41, 0x00, 0x14, - 0x04, 0x50, 0x00, 0x44, 0x00, 0x00, 0x63, 0x80, - 0x00, 0x00, 0x06, 0x19, 0x03, 0x00, 0x04, 0x49, - 0x04, 0x50, 0x00, 0x44, 0x20, 0x01, 0x63, 0x80, - 0x00, 0x00, 0x06, 0x19, 0x00, 0x20, 0xe2, 0x8b, - 0x00, 0xc1, 0x00, 0x84, 0x47, 0x00, 0x51, 0x8b, - 0xc0, 0x20, 0x00, 0x39, 0x00, 0x00, 0x63, 0x80, - 0xc1, 0xa0, 0x04, 0x19, 0x00, 0xe1, 0x00, 0x44, - 0xbd, 0x00, 0x51, 0x8b, 0xc0, 0x20, 0x00, 0x39, - 0x00, 0x00, 0xb1, 0x80, 0xc1, 0xa0, 0x04, 0x19, - 0x03, 0x00, 0x04, 0x49, 0x04, 0x50, 0x00, 0x44, - 0x00, 0x20, 0x61, 0x0a, 0x00, 0x01, 0x00, 0x45, - 0x02, 0x30, 0x61, 0x0a, 0x0c, 0x83, 0x00, 0xc4, - 0x0c, 0x78, 0x08, 0x44, 0x04, 0x5a, 0x08, 0x44, - 0xb2, 0x00, 0x09, 0x4f, 0x10, 0x42, 0x09, 0x8e, - 0x05, 0xb0, 0xe0, 0x18, 0x04, 0x23, 0x00, 0x84, - 0x0c, 0x01, 0x00, 0x11, 0x08, 0x05, 0x61, 0x10, - 0x00, 0x49, 0x08, 0x44, 0x00, 0x48, 0x08, 0x44, - 0xb2, 0x00, 0x09, 0x4f, 0x80, 0x00, 0x71, 0x8b, - 0xc0, 0x00, 0x00, 0x82, 0x0c, 0x01, 0x33, 0x10, - 0x28, 0x01, 0xa3, 0x10, 0x00, 0x01, 0x7a, 0x80, - 0x8c, 0x01, 0x00, 0x80, 0x02, 0x30, 0x61, 0x0a, - 0x20, 0x00, 0x04, 0x19, 0x0c, 0x83, 0x00, 0xc4, - 0x05, 0xb0, 0xc8, 0x18, 0x08, 0x43, 0x00, 0xc4, - 0x01, 0x30, 0xc8, 0x0a, 0x0c, 0x38, 0x00, 0xc4, - 0x08, 0x88, 0x00, 0x44, 0x0c, 0x78, 0x08, 0x44, - 0x04, 0x5a, 0x08, 0x44, 0x00, 0x00, 0xa3, 0x18, - 0x80, 0x00, 0x04, 0x19, 0x0b, 0x04, 0x61, 0xa8, - 0xc3, 0x20, 0x00, 0x39, 0xc3, 0x30, 0x04, 0x19, - 0x0f, 0x10, 0x61, 0x0a, 0xca, 0x30, 0x04, 0x19, - 0x09, 0x04, 0x41, 0xa8, 0xe1, 0x20, 0x00, 0x39, - 0xd1, 0x00, 0x09, 0x4f, 0x00, 0x04, 0x61, 0x02, - 0x08, 0x63, 0x00, 0x44, 0x03, 0x30, 0x41, 0x0a, - 0x20, 0x00, 0x00, 0x39, 0xa3, 0x00, 0x09, 0x4f, - 0x00, 0x04, 0x61, 0x02, 0x00, 0x48, 0x08, 0x44, - 0x08, 0x88, 0x00, 0x44, 0x02, 0x30, 0x61, 0x0a, - 0x00, 0x08, 0x00, 0xc4, 0x0c, 0x78, 0x08, 0x44, - 0x04, 0x5a, 0x08, 0x44, 0xb2, 0x00, 0x09, 0x0f, - 0x10, 0x40, 0x09, 0x8e, 0x00, 0x00, 0x68, 0x5b, - 0x20, 0x04, 0xb1, 0x80, 0x02, 0x00, 0x61, 0x5b, - 0x88, 0x03, 0x7a, 0x80, 0xac, 0x01, 0x00, 0x80, - 0x05, 0xb0, 0xe0, 0x18, 0x00, 0xd3, 0x00, 0x84, - 0x00, 0x49, 0x08, 0x44, 0x00, 0x48, 0x08, 0x44, - 0xb2, 0x00, 0x09, 0x0f, 0x80, 0x00, 0x71, 0x8b, - 0xc0, 0x00, 0x00, 0x82, 0x02, 0x30, 0x61, 0x0a, - 0x00, 0x08, 0x00, 0xc4, 0x05, 0xb0, 0xc8, 0x18, - 0x0c, 0x18, 0x00, 0xc4, 0x01, 0x30, 0xc8, 0x0a, - 0x0c, 0x38, 0x00, 0xc4, 0x08, 0x88, 0x00, 0x44, - 0x0c, 0x78, 0x08, 0x44, 0x00, 0x00, 0x61, 0x18, - 0x20, 0x05, 0xb1, 0x80, 0x00, 0x00, 0x68, 0xcb, - 0x80, 0x00, 0x04, 0x19, 0x0d, 0x10, 0x61, 0x0a, - 0xc3, 0x30, 0x04, 0x19, 0x0b, 0x04, 0x41, 0xa8, - 0x09, 0x04, 0x41, 0xa8, 0xe1, 0x20, 0x00, 0x39, - 0x08, 0x38, 0x00, 0x44, 0x03, 0x30, 0x41, 0x0a, - 0x20, 0x04, 0xb1, 0x80, 0x00, 0x48, 0x08, 0x44, - 0x08, 0x88, 0x00, 0x44, 0x00, 0x00, 0xb1, 0x80, - 0xc2, 0x30, 0x04, 0x19, 0x0c, 0xb8, 0x00, 0xd4, - 0x0f, 0x30, 0x61, 0x0a, 0x0d, 0x30, 0xc8, 0x0a, - 0x0c, 0xb8, 0x00, 0xc4, 0x93, 0x00, 0x01, 0x4f, - 0xe7, 0x00, 0x01, 0x6f, 0x0f, 0x30, 0x61, 0x0a, - 0x20, 0x00, 0x00, 0x88, 0x02, 0x00, 0x61, 0x02, - 0x41, 0x04, 0x04, 0x19, 0x02, 0x04, 0x61, 0x02, - 0x43, 0x04, 0x04, 0x39, 0xcf, 0x30, 0x00, 0x09, - 0x20, 0x00, 0x09, 0x49, 0x00, 0x59, 0x00, 0x44, - 0x93, 0x00, 0x01, 0x4f, 0xe7, 0x00, 0x01, 0x6f, - 0x0d, 0x30, 0x61, 0x0a, 0x20, 0x00, 0x61, 0x88, - 0xc2, 0x00, 0x00, 0x82, 0xc2, 0x03, 0x00, 0x82, - 0xcd, 0x30, 0x00, 0x09, 0x20, 0x00, 0x09, 0x49, - 0x0f, 0x30, 0x61, 0x0a, 0x0d, 0x30, 0xc8, 0x0a, - 0x0c, 0x58, 0x00, 0x84, 0x02, 0x30, 0x61, 0x0a, - 0x05, 0xb0, 0xa8, 0x18, 0xc2, 0x30, 0x04, 0x19, - 0x00, 0x00, 0x00, 0x46, 0x90, 0x40, 0x09, 0x8f, - 0x12, 0x04, 0x09, 0x6e, 0x03, 0x00, 0x09, 0x0e, - 0x00, 0x01, 0x71, 0x82, 0x20, 0x01, 0x00, 0x80, - 0x00, 0x00, 0x61, 0xcb, 0x80, 0x04, 0xb1, 0x80, - 0x00, 0x01, 0xe0, 0x60, 0x0c, 0xd8, 0x04, 0x14, - 0x00, 0x01, 0xeb, 0x80, 0x40, 0x00, 0x52, 0x1b, - 0x80, 0x00, 0x79, 0x80, 0xc0, 0x01, 0x71, 0xc2, - 0x20, 0x00, 0xc0, 0x80, 0x08, 0x0a, 0x04, 0x54, - 0xc0, 0x04, 0xa8, 0x82, 0x80, 0x00, 0x72, 0x1b, - 0x80, 0x00, 0x00, 0x80, 0x00, 0x01, 0xf0, 0x80, - 0x20, 0x00, 0xc0, 0x80, 0x0c, 0x2a, 0x04, 0x54, - 0xc0, 0x04, 0xa8, 0x82, 0x10, 0x00, 0x72, 0x1b, - 0x80, 0x00, 0x00, 0x80, 0x00, 0x01, 0xf0, 0x80, - 0x20, 0x00, 0xc0, 0x80, 0x08, 0x3a, 0x04, 0x54, - 0xc0, 0x04, 0xa8, 0x82, 0x20, 0x00, 0x72, 0x1b, - 0x80, 0x00, 0x00, 0x80, 0xc0, 0x03, 0xf0, 0x82, - 0x20, 0x00, 0xa0, 0x80, 0x00, 0x01, 0x00, 0x11, - 0x40, 0x00, 0xc2, 0x8b, 0x00, 0xaa, 0x00, 0xc4, - 0x00, 0x00, 0xe9, 0x80, 0x05, 0xb0, 0xa8, 0x18, - 0x00, 0x01, 0xa8, 0x22, 0xd0, 0x01, 0x00, 0x82, - 0xf0, 0x00, 0xe2, 0x1b, 0x06, 0x20, 0xa8, 0x0a, - 0x2d, 0x10, 0x61, 0x0a, 0xd1, 0x00, 0x09, 0x2e, - 0x00, 0x01, 0xa8, 0x02, 0x0e, 0x10, 0xc8, 0x0a, - 0x0c, 0xba, 0x04, 0x14, 0x0e, 0x10, 0x61, 0x0a, - 0x04, 0x4a, 0x00, 0x44, 0x0c, 0x10, 0xc8, 0x0a, - 0x04, 0x4a, 0x04, 0x54, 0x0c, 0x10, 0x61, 0x0a, - 0xd0, 0x01, 0x00, 0x82, 0x00, 0x10, 0xa8, 0x18, - 0xa0, 0x00, 0x00, 0x88, 0x00, 0x01, 0x71, 0x82, - 0x03, 0x00, 0x09, 0x0e, 0x9a, 0x01, 0x00, 0x60, - 0x32, 0x00, 0x09, 0x2e, 0x00, 0x00, 0x00, 0x46, - 0x00, 0x01, 0x71, 0x82, 0x20, 0x01, 0x00, 0x80, - 0x00, 0x00, 0x61, 0xcb, 0x80, 0x24, 0xb1, 0xc0, - 0x00, 0x31, 0xe0, 0x60, 0x0c, 0xca, 0x04, 0x14, - 0x00, 0x01, 0xeb, 0x80, 0x40, 0x00, 0x52, 0x1b, - 0x80, 0x00, 0x79, 0x80, 0xc0, 0x01, 0x71, 0xc2, - 0x20, 0x00, 0xc0, 0x80, 0x08, 0xda, 0x04, 0x54, - 0xc0, 0x04, 0xa8, 0x82, 0x80, 0x00, 0x72, 0x1b, - 0x80, 0x00, 0x00, 0x80, 0x00, 0x01, 0xf0, 0x80, - 0x20, 0x00, 0xc0, 0x80, 0x0c, 0xfa, 0x04, 0x54, - 0xc0, 0x04, 0xa8, 0x82, 0x10, 0x00, 0x72, 0x1b, - 0x80, 0x00, 0x00, 0x80, 0x00, 0x01, 0xf0, 0x80, - 0x20, 0x00, 0xc0, 0x80, 0x08, 0x29, 0x04, 0x54, - 0xc0, 0x04, 0xa8, 0x82, 0x20, 0x00, 0x72, 0x1b, - 0x80, 0x00, 0x00, 0x80, 0xc0, 0x03, 0xf0, 0x82, - 0x20, 0x00, 0xa0, 0x80, 0x00, 0x01, 0x00, 0x11, - 0x40, 0x00, 0xc2, 0x8b, 0x00, 0x39, 0x00, 0xc4, - 0x00, 0x00, 0xe9, 0x80, 0x05, 0xb0, 0xa8, 0x18, - 0x00, 0x01, 0xa8, 0x22, 0xd0, 0x01, 0x00, 0x82, - 0xb0, 0x00, 0xe2, 0x1b, 0x06, 0x20, 0xa8, 0x0a, - 0x2f, 0x10, 0x61, 0x0a, 0xf1, 0x00, 0x09, 0x2e, - 0x00, 0x01, 0xa8, 0x02, 0x0e, 0x10, 0xc8, 0x0a, - 0x0c, 0xa9, 0x04, 0x14, 0x0e, 0x10, 0x61, 0x0a, - 0x04, 0x99, 0x00, 0x44, 0x0c, 0x10, 0xc8, 0x0a, - 0x04, 0x99, 0x04, 0x54, 0x0c, 0x10, 0x61, 0x0a, - 0xd0, 0x01, 0x00, 0x82, 0x00, 0x10, 0xa8, 0x18, - 0xa0, 0x00, 0x00, 0x88, 0x00, 0x01, 0x71, 0x82, - 0x9f, 0x01, 0x00, 0x60, 0x00, 0x00, 0x00, 0x46, - 0x00, 0x00, 0x33, 0x80, 0x00, 0x00, 0x83, 0x80, - 0x20, 0x00, 0x7a, 0x80, 0x20, 0x07, 0x33, 0x80, - 0x00, 0x00, 0x83, 0x80, 0x20, 0x04, 0x7a, 0x80, - 0x20, 0x01, 0x00, 0x80, 0x00, 0x00, 0x00, 0x46, - 0x02, 0x00, 0x61, 0x0a, 0x04, 0x1b, 0x04, 0x14, - 0x01, 0x00, 0x61, 0x0a, 0x03, 0x00, 0x48, 0x0a, - 0x0c, 0x79, 0x04, 0x54, 0xc3, 0x00, 0x04, 0x19, - 0x04, 0xc9, 0x00, 0x44, 0x08, 0x00, 0xc8, 0x0a, - 0x04, 0xc9, 0x04, 0x54, 0xc8, 0x00, 0x04, 0x19, - 0x0a, 0x00, 0x61, 0x0a, 0x09, 0x00, 0x48, 0x0a, - 0x0c, 0xe9, 0x04, 0x54, 0xc9, 0x00, 0x04, 0x19, - 0x04, 0xd9, 0x00, 0x44, 0x0b, 0x00, 0xc8, 0x0a, - 0x04, 0xd9, 0x04, 0x54, 0xcb, 0x00, 0x04, 0x19, - 0x04, 0x00, 0x61, 0x0a, 0x06, 0x00, 0x48, 0x0a, - 0x0c, 0xf9, 0x04, 0x54, 0xc6, 0x00, 0x04, 0x19, - 0x04, 0x0b, 0x00, 0x44, 0x05, 0x00, 0xc8, 0x0a, - 0x04, 0x0b, 0x04, 0x54, 0xc5, 0x00, 0x04, 0x19, - 0x07, 0x00, 0x61, 0x0a, 0x0c, 0x00, 0x48, 0x0a, - 0x0c, 0x2b, 0x04, 0x54, 0xcc, 0x00, 0x04, 0x19, - 0x04, 0x1b, 0x00, 0x44, 0x0e, 0x00, 0xc8, 0x0a, - 0x04, 0x1b, 0x04, 0x54, 0xce, 0x00, 0x04, 0x19, - 0x00, 0x00, 0x40, 0x45, 0x92, 0x20, 0x71, 0x8b, - 0xa6, 0xc5, 0x11, 0x00 -}; -- cgit v1.2.3 From 116a9fb3ed98c19d1ee0c6c55971f5b753949393 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 14 Jul 2008 15:03:25 -0700 Subject: x86: MMIOTRACE should not default to on Even the help-text makes it clear that normal people shouldn't enable it. Signed-off-by: Linus Torvalds --- arch/x86/Kconfig.debug | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 5236621350bc..ae36bfa814e5 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -179,7 +179,6 @@ config MMIOTRACE depends on DEBUG_KERNEL && PCI select TRACING select MMIOTRACE_HOOKS - default y help Mmiotrace traces Memory Mapped I/O access and is meant for debugging and reverse engineering. It is called from the ioremap -- cgit v1.2.3 From 50515af207d410c9f228380e529c56f43c3de0bd Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 14 Jul 2008 17:50:24 -0700 Subject: firmware: Correct dependency on CONFIG_EXTRA_FIRMWARE_DIR When CONFIG_EXTRA_FIRMWARE_DIR gets changed, the filename in the .S file (which uses .incbin to include the binary) needs to change. When we renamed the BUILTIN_FIRMWARE_DIR option to EXTRA_FIRMWARE_DIR, we forgot to update the manual dependency in firmware/Makefile, so it was depending on a non-existent file in include/config/ Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- firmware/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/firmware/Makefile b/firmware/Makefile index 10028ace2de4..809a52624bda 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -136,7 +136,7 @@ $(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \ | $(objtree)/$$(dir %) $(call cmd,fwbin,$(patsubst %.gen.S,%,$@)) $(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \ - include/config/builtin/firmware/dir.h | $(objtree)/$$(dir %) + include/config/extra/firmware/dir.h | $(objtree)/$$(dir %) $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@)) # The .o files depend on the binaries directly; the .S files don't. -- cgit v1.2.3 From b3fcaaa8a6359e9ed623ed4c1d2d48c79eed4648 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 14 Jul 2008 19:25:57 +1000 Subject: powerpc: mman.h export fixups Commit ef3d3246a0d06be622867d21af25f997aeeb105f ("powerpc/mm: Add Strong Access Ordering support") in the powerpc/{next,master} tree caused the following in a powerpc allmodconfig build: usr/include/asm/mman.h requires linux/mm.h, which does not exist in exported headers We should not use CONFIG_PPC64 in an unprotected (by __KERNEL__) section of an exported include file and linux/mm.h is not exported. So protect the whole section that is CONFIG_PPC64 with __KERNEL__ and put the two introduced includes in there as well. Signed-off-by: Stephen Rothwell Acked-by: Dave Kleikamp Signed-off-by: Benjamin Herrenschmidt --- include/asm-powerpc/Kbuild | 1 - include/asm-powerpc/mman.h | 8 ++++++-- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild index 34a0a8db0104..04ce8f8a2ee7 100644 --- a/include/asm-powerpc/Kbuild +++ b/include/asm-powerpc/Kbuild @@ -2,7 +2,6 @@ include include/asm-generic/Kbuild.asm header-y += auxvec.h header-y += ioctls.h -header-y += mman.h header-y += sembuf.h header-y += siginfo.h header-y += stat.h diff --git a/include/asm-powerpc/mman.h b/include/asm-powerpc/mman.h index f8a32e20ba04..9209f755763e 100644 --- a/include/asm-powerpc/mman.h +++ b/include/asm-powerpc/mman.h @@ -1,9 +1,7 @@ #ifndef _ASM_POWERPC_MMAN_H #define _ASM_POWERPC_MMAN_H -#include #include -#include /* * This program is free software; you can redistribute it and/or @@ -28,7 +26,12 @@ #define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ #define MAP_NONBLOCK 0x10000 /* do not block on IO */ +#ifdef __KERNEL__ #ifdef CONFIG_PPC64 + +#include +#include + /* * This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits() * here. How important is the optimization? @@ -56,4 +59,5 @@ static inline int arch_validate_prot(unsigned long prot) #define arch_validate_prot(prot) arch_validate_prot(prot) #endif /* CONFIG_PPC64 */ +#endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_MMAN_H */ -- cgit v1.2.3 From fe9e8d53772b5ea9ccf8ea4e8f0f009a6885eb70 Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Tue, 8 Jul 2008 15:45:11 +1000 Subject: powerpc: Add driver for Barrier Synchronization Register Adds a character driver for BSR support on IBM POWER systems including Power5 and Power6. The BSR is an optional processor facility not currently implemented by any other processors. It's primary purpose is fast large SMP synchronization. More details on the BSR are in comments to the code which follows. This patch adds BSR driver to pseries_defconfig. Signed-off-by: Sonny Rao Signed-off-by: Joel Schopp Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/pseries_defconfig | 1 + drivers/char/Kconfig | 8 + drivers/char/Makefile | 1 + drivers/char/bsr.c | 312 +++++++++++++++++++++++++++++++++ 4 files changed, 322 insertions(+) create mode 100644 drivers/char/bsr.c diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index adaa05fb0478..fe6ffa683d78 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -946,6 +946,7 @@ CONFIG_HVC_DRIVER=y CONFIG_HVC_CONSOLE=y CONFIG_HVC_RTAS=y CONFIG_HVCS=m +CONFIG_IBM_BSR=m # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 2d854bb9373e..650e6b44ce65 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -649,6 +649,14 @@ config HVCS which will also be compiled when this driver is built as a module. +config IBM_BSR + tristate "IBM POWER Barrier Synchronization Register support" + depends on PPC_PSERIES + help + This devices exposes a hardware mechanism for fast synchronization + of threads across a large system which avoids bouncing a cacheline + between several cores on a system + source "drivers/char/ipmi/Kconfig" config DS1620 diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 4c1c584e9eb6..d38ac5030763 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_MMTIMER) += mmtimer.o obj-$(CONFIG_VIOCONS) += viocons.o obj-$(CONFIG_VIOTAPE) += viotape.o obj-$(CONFIG_HVCS) += hvcs.o +obj-$(CONFIG_IBM_BSR) += bsr.o obj-$(CONFIG_SGI_MBCS) += mbcs.o obj-$(CONFIG_BRIQ_PANEL) += briq_panel.o obj-$(CONFIG_BFIN_OTP) += bfin-otp.o diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c new file mode 100644 index 000000000000..b650b4e48e50 --- /dev/null +++ b/drivers/char/bsr.c @@ -0,0 +1,312 @@ +/* IBM POWER Barrier Synchronization Register Driver + * + * Copyright IBM Corporation 2008 + * + * Author: Sonny Rao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + This driver exposes a special register which can be used for fast + synchronization across a large SMP machine. The hardware is exposed + as an array of bytes where each process will write to one of the bytes to + indicate it has finished the current stage and this update is broadcast to + all processors without having to bounce a cacheline between them. In + POWER5 and POWER6 there is one of these registers per SMP, but it is + presented in two forms; first, it is given as a whole and then as a number + of smaller registers which alias to parts of the single whole register. + This can potentially allow multiple groups of processes to each have their + own private synchronization device. + + Note that this hardware *must* be written to using *only* single byte writes. + It may be read using 1, 2, 4, or 8 byte loads which must be aligned since + this region is treated as cache-inhibited processes should also use a + full sync before and after writing to the BSR to ensure all stores and + the BSR update have made it to all chips in the system +*/ + +/* This is arbitrary number, up to Power6 it's been 17 or fewer */ +#define BSR_MAX_DEVS (32) + +struct bsr_dev { + u64 bsr_addr; /* Real address */ + u64 bsr_len; /* length of mem region we can map */ + unsigned bsr_bytes; /* size of the BSR reg itself */ + unsigned bsr_stride; /* interval at which BSR repeats in the page */ + unsigned bsr_type; /* maps to enum below */ + unsigned bsr_num; /* bsr id number for its type */ + int bsr_minor; + + dev_t bsr_dev; + struct cdev bsr_cdev; + struct device *bsr_device; + char bsr_name[32]; + +}; + +static unsigned num_bsr_devs; +static struct bsr_dev *bsr_devs; +static struct class *bsr_class; +static int bsr_major; + +enum { + BSR_8 = 0, + BSR_16 = 1, + BSR_64 = 2, + BSR_128 = 3, + BSR_UNKNOWN = 4, + BSR_MAX = 5, +}; + +static unsigned bsr_types[BSR_MAX]; + +static ssize_t +bsr_size_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct bsr_dev *bsr_dev = dev_get_drvdata(dev); + return sprintf(buf, "%u\n", bsr_dev->bsr_bytes); +} + +static ssize_t +bsr_stride_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct bsr_dev *bsr_dev = dev_get_drvdata(dev); + return sprintf(buf, "%u\n", bsr_dev->bsr_stride); +} + +static ssize_t +bsr_len_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct bsr_dev *bsr_dev = dev_get_drvdata(dev); + return sprintf(buf, "%lu\n", bsr_dev->bsr_len); +} + +static struct device_attribute bsr_dev_attrs[] = { + __ATTR(bsr_size, S_IRUGO, bsr_size_show, NULL), + __ATTR(bsr_stride, S_IRUGO, bsr_stride_show, NULL), + __ATTR(bsr_length, S_IRUGO, bsr_len_show, NULL), + __ATTR_NULL +}; + +static int bsr_mmap(struct file *filp, struct vm_area_struct *vma) +{ + unsigned long size = vma->vm_end - vma->vm_start; + struct bsr_dev *dev = filp->private_data; + + if (size > dev->bsr_len || (size & (PAGE_SIZE-1))) + return -EINVAL; + + vma->vm_flags |= (VM_IO | VM_DONTEXPAND); + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + if (io_remap_pfn_range(vma, vma->vm_start, dev->bsr_addr >> PAGE_SHIFT, + size, vma->vm_page_prot)) + return -EAGAIN; + + return 0; +} + +static int bsr_open(struct inode * inode, struct file * filp) +{ + struct cdev *cdev = inode->i_cdev; + struct bsr_dev *dev = container_of(cdev, struct bsr_dev, bsr_cdev); + + filp->private_data = dev; + return 0; +} + +const static struct file_operations bsr_fops = { + .owner = THIS_MODULE, + .mmap = bsr_mmap, + .open = bsr_open, +}; + +static void bsr_cleanup_devs(void) +{ + int i; + for (i=0 ; i < num_bsr_devs; i++) { + struct bsr_dev *cur = bsr_devs + i; + if (cur->bsr_device) { + cdev_del(&cur->bsr_cdev); + device_del(cur->bsr_device); + } + } + + kfree(bsr_devs); +} + +static int bsr_create_devs(struct device_node *bn) +{ + int bsr_stride_len, bsr_bytes_len; + const u32 *bsr_stride; + const u32 *bsr_bytes; + unsigned i; + + bsr_stride = of_get_property(bn, "ibm,lock-stride", &bsr_stride_len); + bsr_bytes = of_get_property(bn, "ibm,#lock-bytes", &bsr_bytes_len); + + if (!bsr_stride || !bsr_bytes || + (bsr_stride_len != bsr_bytes_len)) { + printk(KERN_ERR "bsr of-node has missing/incorrect property\n"); + return -ENODEV; + } + + num_bsr_devs = bsr_bytes_len / sizeof(u32); + + /* only a warning, its informational since we'll fail and exit */ + WARN_ON(num_bsr_devs > BSR_MAX_DEVS); + + bsr_devs = kzalloc(sizeof(struct bsr_dev) * num_bsr_devs, GFP_KERNEL); + if (!bsr_devs) + return -ENOMEM; + + for (i = 0 ; i < num_bsr_devs; i++) { + struct bsr_dev *cur = bsr_devs + i; + struct resource res; + int result; + + result = of_address_to_resource(bn, i, &res); + if (result < 0) { + printk(KERN_ERR "bsr of-node has invalid reg property\n"); + goto out_err; + } + + cur->bsr_minor = i; + cur->bsr_addr = res.start; + cur->bsr_len = res.end - res.start + 1; + cur->bsr_bytes = bsr_bytes[i]; + cur->bsr_stride = bsr_stride[i]; + cur->bsr_dev = MKDEV(bsr_major, i); + + switch(cur->bsr_bytes) { + case 8: + cur->bsr_type = BSR_8; + break; + case 16: + cur->bsr_type = BSR_16; + break; + case 64: + cur->bsr_type = BSR_64; + break; + case 128: + cur->bsr_type = BSR_128; + break; + default: + cur->bsr_type = BSR_UNKNOWN; + printk(KERN_INFO "unknown BSR size %d\n",cur->bsr_bytes); + } + + cur->bsr_num = bsr_types[cur->bsr_type]; + bsr_types[cur->bsr_type] = cur->bsr_num + 1; + snprintf(cur->bsr_name, 32, "bsr%d_%d", + cur->bsr_bytes, cur->bsr_num); + + cdev_init(&cur->bsr_cdev, &bsr_fops); + result = cdev_add(&cur->bsr_cdev, cur->bsr_dev, 1); + if (result) + goto out_err; + + cur->bsr_device = device_create_drvdata(bsr_class, NULL, + cur->bsr_dev, + cur, cur->bsr_name); + if (!cur->bsr_device) { + printk(KERN_ERR "device_create failed for %s\n", + cur->bsr_name); + cdev_del(&cur->bsr_cdev); + goto out_err; + } + } + + return 0; + + out_err: + + bsr_cleanup_devs(); + return -ENODEV; +} + +static int __init bsr_init(void) +{ + struct device_node *np; + dev_t bsr_dev = MKDEV(bsr_major, 0); + int ret = -ENODEV; + int result; + + np = of_find_compatible_node(NULL, "ibm,bsr", "ibm,bsr"); + if (!np) + goto out_err; + + bsr_class = class_create(THIS_MODULE, "bsr"); + if (IS_ERR(bsr_class)) { + printk(KERN_ERR "class_create() failed for bsr_class\n"); + goto out_err_1; + } + bsr_class->dev_attrs = bsr_dev_attrs; + + result = alloc_chrdev_region(&bsr_dev, 0, BSR_MAX_DEVS, "bsr"); + bsr_major = MAJOR(bsr_dev); + if (result < 0) { + printk(KERN_ERR "alloc_chrdev_region() failed for bsr\n"); + goto out_err_2; + } + + if ((ret = bsr_create_devs(np)) < 0) + goto out_err_3; + + of_node_put(np); + + return 0; + + out_err_3: + unregister_chrdev_region(bsr_dev, BSR_MAX_DEVS); + + out_err_2: + class_destroy(bsr_class); + + out_err_1: + of_node_put(np); + + out_err: + + return ret; +} + +static void __exit bsr_exit(void) +{ + + bsr_cleanup_devs(); + + if (bsr_class) + class_destroy(bsr_class); + + if (bsr_major) + unregister_chrdev_region(MKDEV(bsr_major, 0), BSR_MAX_DEVS); +} + +module_init(bsr_init); +module_exit(bsr_exit); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Sonny Rao "); -- cgit v1.2.3 From 0f47331475201c7785454030a9976c8ac902a35d Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Thu, 10 Jul 2008 01:06:57 +1000 Subject: powerpc: Add PPC_FEATURE_PSERIES_PERFMON_COMPAT Background from Maynard Johnson: As of POWER6, a set of 32 common events is defined that must be supported on all future POWER processors. The main impetus for this compat set is the need to support partition migration, especially from processor P(n) to processor P(n+1), where performance software that's running in the new partition may not be knowledgeable about processor P(n+1). If a performance tool determines it does not support the physical processor, but is told (via the PPC_FEATURE_PSERIES_PERFMON_COMPAT bit) that the processor supports the notion of the PMU compat set, then the performance tool can surface just those events to the user of the tool. PPC_FEATURE_PSERIES_PERFMON_COMPAT indicates that the PMU supports at least this basic subset of events which is compatible across POWER processor lines. Signed-off-by: Nathan Lynch Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 6 ++++-- include/asm-powerpc/cputable.h | 3 +++ 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 72adb19a204d..f7f3c215d06f 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -70,10 +70,12 @@ extern void __restore_cpu_power7(void); PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP) #define COMMON_USER_POWER6 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\ PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \ - PPC_FEATURE_TRUE_LE) + PPC_FEATURE_TRUE_LE | \ + PPC_FEATURE_PSERIES_PERFMON_COMPAT) #define COMMON_USER_POWER7 (COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_06 |\ PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \ - PPC_FEATURE_TRUE_LE) + PPC_FEATURE_TRUE_LE | \ + PPC_FEATURE_PSERIES_PERFMON_COMPAT) #define COMMON_USER_PA6T (COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\ PPC_FEATURE_TRUE_LE | \ PPC_FEATURE_HAS_ALTIVEC_COMP) diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 4fd76898975b..2a3e9075a5a0 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -27,6 +27,9 @@ #define PPC_FEATURE_ARCH_2_06 0x00000100 #define PPC_FEATURE_HAS_VSX 0x00000080 +#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \ + 0x00000040 + #define PPC_FEATURE_TRUE_LE 0x00000002 #define PPC_FEATURE_PPC_LE 0x00000001 -- cgit v1.2.3 From 443dcac4d89622cbfc61f53523007979879d6f8e Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Thu, 10 Jul 2008 01:28:07 +1000 Subject: powerpc: Remove unnecessary condition when sanity-checking WIMG bits It is okay for both _PAGE_GUARDED and _PAGE_COHERENT (G and M) to be set in the same pte. In fact, even if that were not the case, there doesn't seem to be any place where G is set without also setting I (_PAGE_NO_CACHE), so the test for I is sufficient as a condition to clear _PAGE_COHERENT when filling the hash table. Signed-off-by: Dave Kleikamp Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/cell/beat_htab.c | 4 ++-- arch/powerpc/platforms/pseries/lpar.c | 3 +-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/cell/beat_htab.c b/arch/powerpc/platforms/cell/beat_htab.c index 81467ff055c8..2e67bd840e01 100644 --- a/arch/powerpc/platforms/cell/beat_htab.c +++ b/arch/powerpc/platforms/cell/beat_htab.c @@ -112,7 +112,7 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); - if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE)) + if (rflags & _PAGE_NO_CACHE) hpte_r &= ~_PAGE_COHERENT; spin_lock(&beat_htab_lock); @@ -334,7 +334,7 @@ static long beat_lpar_hpte_insert_v3(unsigned long hpte_group, if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r); - if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE)) + if (rflags & _PAGE_NO_CACHE) hpte_r &= ~_PAGE_COHERENT; /* insert into not-volted entry */ diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 38b5927b3629..52a80e5840e8 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -305,8 +305,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group, flags = 0; /* Make pHyp happy */ - if ((rflags & _PAGE_GUARDED) || - ((rflags & _PAGE_NO_CACHE) & !(rflags & _PAGE_WRITETHRU))) + if ((rflags & _PAGE_NO_CACHE) & !(rflags & _PAGE_WRITETHRU)) hpte_r &= ~_PAGE_COHERENT; lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot); -- cgit v1.2.3 From 01f4b8b8b8db09b88be7df7e51192e4e678b69d3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 11 Jul 2008 00:08:18 +1000 Subject: powerpc: support for latencytop Implement save_stack_trace_tsk on powerpc, so that we can run with latencytop. Signed-off-by: Arnd Bergmann Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 3 +++ arch/powerpc/kernel/stacktrace.c | 37 +++++++++++++++++++++++++++---------- 2 files changed, 30 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index aaf99892d1b3..5e2185432ad3 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -53,6 +53,9 @@ config STACKTRACE_SUPPORT bool default y +config HAVE_LATENCYTOP_SUPPORT + def_bool y + config TRACE_IRQFLAGS_SUPPORT bool depends on PPC64 diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c index 962944038430..6a4fb003fa54 100644 --- a/arch/powerpc/kernel/stacktrace.c +++ b/arch/powerpc/kernel/stacktrace.c @@ -10,33 +10,34 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include +#include /* * Save stack-backtrace addresses into a stack_trace buffer. */ -void save_stack_trace(struct stack_trace *trace) +static void save_context_stack(struct stack_trace *trace, unsigned long sp, + struct task_struct *tsk, int savesched) { - unsigned long sp; - - asm("mr %0,1" : "=r" (sp)); - for (;;) { unsigned long *stack = (unsigned long *) sp; unsigned long newsp, ip; - if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD)) + if (!validate_sp(sp, tsk, STACK_FRAME_OVERHEAD)) return; newsp = stack[0]; ip = stack[STACK_FRAME_LR_SAVE]; - if (!trace->skip) - trace->entries[trace->nr_entries++] = ip; - else - trace->skip--; + if (savesched || !in_sched_functions(ip)) { + if (!trace->skip) + trace->entries[trace->nr_entries++] = ip; + else + trace->skip--; + } if (trace->nr_entries >= trace->max_entries) return; @@ -44,3 +45,19 @@ void save_stack_trace(struct stack_trace *trace) sp = newsp; } } + +void save_stack_trace(struct stack_trace *trace) +{ + unsigned long sp; + + asm("mr %0,1" : "=r" (sp)); + + save_context_stack(trace, sp, current, 1); +} +EXPORT_SYMBOL_GPL(save_stack_trace); + +void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) +{ + save_context_stack(trace, tsk->thread.regs->gpr[1], tsk, 0); +} +EXPORT_SYMBOL_GPL(save_stack_trace_tsk); -- cgit v1.2.3 From 7c29217096d83f657e6ee70479af09b46f4275f6 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Fri, 11 Jul 2008 16:29:12 +1000 Subject: powerpc: fix giveup_vsx to save registers correctly giveup_vsx didn't save the FPU and VMX regsiters. Change it to be like giveup_fpr/altivec which save these registers. Also update call sites where FPU and VMX are already saved to use the original giveup_vsx (renamed to __giveup_vsx). Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/misc_64.S | 8 ++++---- arch/powerpc/kernel/process.c | 10 +++++++++- arch/powerpc/kernel/signal_32.c | 2 +- arch/powerpc/kernel/signal_64.c | 2 +- include/asm-powerpc/system.h | 1 + 5 files changed, 16 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 31b9026cf1e3..4dd70cf7bb4e 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -508,12 +508,12 @@ _GLOBAL(giveup_altivec) #ifdef CONFIG_VSX /* - * giveup_vsx(tsk) - * Disable VSX for the task given as the argument, - * and save the vector registers in its thread_struct. + * __giveup_vsx(tsk) + * Disable VSX for the task given as the argument. + * Does NOT save vsx registers. * Enables the VSX for use in the kernel on return. */ -_GLOBAL(giveup_vsx) +_GLOBAL(__giveup_vsx) mfmsr r5 oris r5,r5,MSR_VSX@h mtmsrd r5 /* enable use of VSX now */ diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 0a4eb0811590..219f3634115e 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -159,6 +159,13 @@ void enable_kernel_vsx(void) EXPORT_SYMBOL(enable_kernel_vsx); #endif +void giveup_vsx(struct task_struct *tsk) +{ + giveup_fpu(tsk); + giveup_altivec(tsk); + __giveup_vsx(tsk); +} + void flush_vsx_to_thread(struct task_struct *tsk) { if (tsk->thread.regs) { @@ -290,7 +297,8 @@ struct task_struct *__switch_to(struct task_struct *prev, #endif /* CONFIG_ALTIVEC */ #ifdef CONFIG_VSX if (prev->thread.regs && (prev->thread.regs->msr & MSR_VSX)) - giveup_vsx(prev); + /* VMX and FPU registers are already save here */ + __giveup_vsx(prev); #endif /* CONFIG_VSX */ #ifdef CONFIG_SPE /* diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 6f6810db0a74..3e80aa32b8b0 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -452,7 +452,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, * contains valid data */ if (current->thread.used_vsr) { - flush_vsx_to_thread(current); + __giveup_vsx(current); if (copy_vsx_to_user(&frame->mc_vsregs, current)) return 1; msr |= MSR_VSX; diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 5f9d2ef2e24b..65ad925c3a8f 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -122,7 +122,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, * VMX data. */ if (current->thread.used_vsr) { - flush_vsx_to_thread(current); + __giveup_vsx(current); v_regs += ELF_NVRREG; err |= copy_vsx_to_user(v_regs, current); /* set MSR_VSX in the MSR value in the frame to diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 0c12c66733f6..e6e25e2364eb 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -139,6 +139,7 @@ extern void enable_kernel_altivec(void); extern void giveup_altivec(struct task_struct *); extern void load_up_altivec(struct task_struct *); extern int emulate_altivec(struct pt_regs *); +extern void __giveup_vsx(struct task_struct *); extern void giveup_vsx(struct task_struct *); extern void enable_kernel_spe(void); extern void giveup_spe(struct task_struct *); -- cgit v1.2.3 From cd6f37be7fdc9fea407379745350f6630b9d3cdd Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Fri, 11 Jul 2008 16:31:09 +1000 Subject: powerpc: Add VSX load/store alignment exception handler VSX loads and stores will take an alignment exception when the address is not on a 4 byte boundary. This add support for these alignment exceptions and will emulate the requested load or store. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/align.c | 58 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 57 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index f22b5d0a4a97..367129789cc0 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -48,6 +48,7 @@ struct aligninfo { #define HARD 0x80 /* string, stwcx. */ #define E4 0x40 /* SPE endianness is word */ #define E8 0x80 /* SPE endianness is double word */ +#define SPLT 0x80 /* VSX SPLAT load */ /* DSISR bits reported for a DCBZ instruction: */ #define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ @@ -637,6 +638,36 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg, } #endif /* CONFIG_SPE */ +#ifdef CONFIG_VSX +/* + * Emulate VSX instructions... + */ +static int emulate_vsx(unsigned char __user *addr, unsigned int reg, + unsigned int areg, struct pt_regs *regs, + unsigned int flags, unsigned int length) +{ + char *ptr = (char *) ¤t->thread.TS_FPR(reg); + int ret; + + flush_vsx_to_thread(current); + + if (flags & ST) + ret = __copy_to_user(addr, ptr, length); + else { + if (flags & SPLT){ + ret = __copy_from_user(ptr, addr, length); + ptr += length; + } + ret |= __copy_from_user(ptr, addr, length); + } + if (flags & U) + regs->gpr[areg] = regs->dar; + if (ret) + return -EFAULT; + return 1; +} +#endif + /* * Called on alignment exception. Attempts to fixup * @@ -647,7 +678,7 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg, int fix_alignment(struct pt_regs *regs) { - unsigned int instr, nb, flags; + unsigned int instr, nb, flags, instruction = 0; unsigned int reg, areg; unsigned int dsisr; unsigned char __user *addr; @@ -689,6 +720,7 @@ int fix_alignment(struct pt_regs *regs) if (cpu_has_feature(CPU_FTR_REAL_LE) && (regs->msr & MSR_LE)) instr = cpu_to_le32(instr); dsisr = make_dsisr(instr); + instruction = instr; } /* extract the operation and registers from the dsisr */ @@ -728,6 +760,30 @@ int fix_alignment(struct pt_regs *regs) /* DAR has the operand effective address */ addr = (unsigned char __user *)regs->dar; +#ifdef CONFIG_VSX + if ((instruction & 0xfc00003e) == 0x7c000018) { + /* Additional register addressing bit (64 VSX vs 32 FPR/GPR */ + reg |= (instruction & 0x1) << 5; + /* Simple inline decoder instead of a table */ + if (instruction & 0x200) + nb = 16; + else if (instruction & 0x080) + nb = 8; + else + nb = 4; + flags = 0; + if (instruction & 0x100) + flags |= ST; + if (instruction & 0x040) + flags |= U; + /* splat load needs a special decoder */ + if ((instruction & 0x400) == 0){ + flags |= SPLT; + nb = 8; + } + return emulate_vsx(addr, reg, areg, regs, flags, nb); + } +#endif /* A size of 0 indicates an instruction we don't support, with * the exception of DCBZ which is handled as a special case here */ -- cgit v1.2.3 From b6f6b98a4e91fcf31db7de54c3aa86252fc6fb5f Mon Sep 17 00:00:00 2001 From: Sonny Rao Date: Sat, 12 Jul 2008 09:00:26 +1000 Subject: powerpc: Don't spin on sync instruction at boot time Push the sync below the secondary smp init hold loop and comment its purpose. This should speed up boot by reducing global traffic during the single-threaded portion of boot. Signed-off-by: Sonny Rao Signed-off-by: Milton Miller Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/head_64.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index ecced1eb03ae..cc8fb474d520 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -1198,7 +1198,6 @@ _GLOBAL(generic_secondary_smp_init) 3: HMT_LOW lbz r23,PACAPROCSTART(r13) /* Test if this processor should */ /* start. */ - sync #ifndef CONFIG_SMP b 3b /* Never go on non-SMP */ @@ -1206,6 +1205,8 @@ _GLOBAL(generic_secondary_smp_init) cmpwi 0,r23,0 beq 3b /* Loop until told to go */ + sync /* order paca.run and cur_cpu_spec */ + /* See if we need to call a cpu state restore handler */ LOAD_REG_IMMEDIATE(r23, cur_cpu_spec) ld r23,0(r23) -- cgit v1.2.3 From 004ea683d96ff51131789e78a3de7dafcdbf912d Mon Sep 17 00:00:00 2001 From: Grant Erickson Date: Wed, 9 Jul 2008 01:03:06 +1000 Subject: ibm_newemac: Add MII mode support to the EMAC RGMII bridge. This patch adds support to the RGMII handler in the EMAC driver for the MII PHY mode such that device tree entries of the form `phy-mode = "mii";' are recognized and handled appropriately. While logically, in software, "gmii" and "mii" modes are the same, they are wired differently, so it makes sense to allow DTS authors to specify each explicitly. Signed-off-by: Grant Erickson Acked-by: Stefan Roese Acked-by: Benjamin Herrenschmidt Acked-by: Jeff Garzik Signed-off-by: Benjamin Herrenschmidt --- drivers/net/ibm_newemac/rgmii.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ibm_newemac/rgmii.c b/drivers/net/ibm_newemac/rgmii.c index e32da3de2695..1d5379de6900 100644 --- a/drivers/net/ibm_newemac/rgmii.c +++ b/drivers/net/ibm_newemac/rgmii.c @@ -39,6 +39,7 @@ #define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4)) #define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4)) #define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4)) +#define RGMII_FER_MII(idx) RGMII_FER_GMII(idx) /* RGMIIx_SSR */ #define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8)) @@ -49,6 +50,7 @@ static inline int rgmii_valid_mode(int phy_mode) { return phy_mode == PHY_MODE_GMII || + phy_mode == PHY_MODE_MII || phy_mode == PHY_MODE_RGMII || phy_mode == PHY_MODE_TBI || phy_mode == PHY_MODE_RTBI; @@ -63,6 +65,8 @@ static inline const char *rgmii_mode_name(int mode) return "TBI"; case PHY_MODE_GMII: return "GMII"; + case PHY_MODE_MII: + return "MII"; case PHY_MODE_RTBI: return "RTBI"; default: @@ -79,6 +83,8 @@ static inline u32 rgmii_mode_mask(int mode, int input) return RGMII_FER_TBI(input); case PHY_MODE_GMII: return RGMII_FER_GMII(input); + case PHY_MODE_MII: + return RGMII_FER_MII(input); case PHY_MODE_RTBI: return RGMII_FER_RTBI(input); default: -- cgit v1.2.3 From ad1f8bf073e1c1996bb37b669352e3d7b1eb2b1f Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 14 Jul 2008 18:13:10 -0700 Subject: Fix accidental reference to tg3 firmware We're not updating the tg3 driver to use request_firmware() yet, but a reference to its firmware accidentally slipped in as part of commit c4667746 ("dabusb: use request_firmware()"). Remove it again. Signed-off-by: David Woodhouse Reported-by: Yinghai Lu Signed-off-by: Linus Torvalds --- firmware/Makefile | 2 -- 1 file changed, 2 deletions(-) diff --git a/firmware/Makefile b/firmware/Makefile index 809a52624bda..e4f2fb3d1917 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -34,8 +34,6 @@ fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \ sb16/ima_adpcm_capture.csp fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \ yamaha/ds1e_ctrl.fw -fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \ - tigon/tg3_tso5.bin fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \ emi26/bitstream.fw -- cgit v1.2.3 From 4d3702b62e004172f44870763cf56793d8de0cbf Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 18:11:23 -0700 Subject: x86: Rename "ignore" macro in to avoid collision Commit 70f1bba4 ("x86: use ignore macro instead of hash comment") breaks the 64-bit x86 build on toolchains that have CONFIG_AS_CFI undefined with: arch/x86/lib/csum-copy_64.S:48: Error: Macro `ignore' was already defined because now uses the ignore macro name itself. Fix this by changing to __cfi_ignore in dwarf2.h. Signed-off-by: Roland Dreier Signed-off-by: Linus Torvalds --- include/asm-x86/dwarf2.h | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/include/asm-x86/dwarf2.h b/include/asm-x86/dwarf2.h index 0bfe250894f7..fd4a6a0393ac 100644 --- a/include/asm-x86/dwarf2.h +++ b/include/asm-x86/dwarf2.h @@ -38,23 +38,23 @@ /* Due to the structure of pre-exisiting code, don't use assembler line comment character # to ignore the arguments. Instead, use a dummy macro. */ -.macro ignore a=0, b=0, c=0, d=0 +.macro __cfi_ignore a=0, b=0, c=0, d=0 .endm -#define CFI_STARTPROC ignore -#define CFI_ENDPROC ignore -#define CFI_DEF_CFA ignore -#define CFI_DEF_CFA_REGISTER ignore -#define CFI_DEF_CFA_OFFSET ignore -#define CFI_ADJUST_CFA_OFFSET ignore -#define CFI_OFFSET ignore -#define CFI_REL_OFFSET ignore -#define CFI_REGISTER ignore -#define CFI_RESTORE ignore -#define CFI_REMEMBER_STATE ignore -#define CFI_RESTORE_STATE ignore -#define CFI_UNDEFINED ignore -#define CFI_SIGNAL_FRAME ignore +#define CFI_STARTPROC __cfi_ignore +#define CFI_ENDPROC __cfi_ignore +#define CFI_DEF_CFA __cfi_ignore +#define CFI_DEF_CFA_REGISTER __cfi_ignore +#define CFI_DEF_CFA_OFFSET __cfi_ignore +#define CFI_ADJUST_CFA_OFFSET __cfi_ignore +#define CFI_OFFSET __cfi_ignore +#define CFI_REL_OFFSET __cfi_ignore +#define CFI_REGISTER __cfi_ignore +#define CFI_RESTORE __cfi_ignore +#define CFI_REMEMBER_STATE __cfi_ignore +#define CFI_RESTORE_STATE __cfi_ignore +#define CFI_UNDEFINED __cfi_ignore +#define CFI_SIGNAL_FRAME __cfi_ignore #endif -- cgit v1.2.3 From 7ff86b0317bc40c665aab62f3b7669713ade07c5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 16 Jul 2008 02:20:11 +0200 Subject: powerpc: Fix a build problem on ppc32 with new DMA_ATTRs The new dma_attrs support must only be enabled for 64 bits as it's not been implemented for 32 bits yet. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 5e2185432ad3..06b72771ae22 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -113,7 +113,7 @@ config PPC select HAVE_KPROBES select HAVE_KRETPROBES select HAVE_LMB - select HAVE_DMA_ATTRS + select HAVE_DMA_ATTRS if PPC64 config EARLY_PRINTK bool -- cgit v1.2.3 From 585583d95c5660973bc0cf64add517b040acd8a4 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 14 Jul 2008 08:08:45 -0500 Subject: powerpc: Fix pte_update for CONFIG_PTE_64BIT and !PTE_ATOMIC_UPDATES Because the pte is now 64-bits the compiler was optimizing the update to always clear the upper 32-bits of the pte. We need to ensure the clr mask is treated as an unsigned long long to get the proper behavior. Signed-off-by: Kumar Gala Acked-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- include/asm-powerpc/pgtable-ppc32.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index 11eede4a2906..73015f0139de 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -624,7 +624,7 @@ static inline unsigned long long pte_update(pte_t *p, : "cc" ); #else /* PTE_ATOMIC_UPDATES */ unsigned long long old = pte_val(*p); - *p = __pte((old & ~clr) | set); + *p = __pte((old & ~(unsigned long long)clr) | set); #endif /* !PTE_ATOMIC_UPDATES */ #ifdef CONFIG_44x -- cgit v1.2.3 From 242e3df80b8d25ed681c278512df0993725f25dd Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 15 Jul 2008 15:48:05 +1000 Subject: drm/radeon: fixup issue with radeon and PAT support. With new userspace libpciaccess we can get a conflicting mapping on the PCIE GART table in the video RAM. Always try and map it _wc. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_memory.c | 5 +++++ drivers/gpu/drm/radeon/radeon_cp.c | 2 +- include/drm/drmP.h | 1 + 3 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_memory.c b/drivers/gpu/drm/drm_memory.c index 845081b44f63..0177012845c6 100644 --- a/drivers/gpu/drm/drm_memory.c +++ b/drivers/gpu/drm/drm_memory.c @@ -167,6 +167,11 @@ void drm_core_ioremap(struct drm_map *map, struct drm_device *dev) } EXPORT_SYMBOL(drm_core_ioremap); +void drm_core_ioremap_wc(struct drm_map *map, struct drm_device *dev) +{ + map->handle = ioremap_wc(map->offset, map->size); +} +EXPORT_SYMBOL(drm_core_ioremap_wc); void drm_core_ioremapfree(struct drm_map *map, struct drm_device *dev) { if (!map->handle || !map->size) diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index e53158f0ecb5..f0de81a5689d 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -1154,7 +1154,7 @@ static int radeon_do_init_cp(struct drm_device * dev, drm_radeon_init_t * init) dev_priv->gart_info.mapping.size = dev_priv->gart_info.table_size; - drm_core_ioremap(&dev_priv->gart_info.mapping, dev); + drm_core_ioremap_wc(&dev_priv->gart_info.mapping, dev); dev_priv->gart_info.addr = dev_priv->gart_info.mapping.handle; diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 0764b662b339..1c1b13e29223 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -1089,6 +1089,7 @@ extern int drm_mm_remove_space_from_tail(struct drm_mm *mm, unsigned long size); extern int drm_mm_add_space_to_tail(struct drm_mm *mm, unsigned long size); extern void drm_core_ioremap(struct drm_map *map, struct drm_device *dev); +extern void drm_core_ioremap_wc(struct drm_map *map, struct drm_device *dev); extern void drm_core_ioremapfree(struct drm_map *map, struct drm_device *dev); static __inline__ struct drm_map *drm_core_findmap(struct drm_device *dev, -- cgit v1.2.3 From 9527056630b68c94b94b94cd58c6cbb65e611fd1 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 14 Jul 2008 17:58:44 +0300 Subject: MAINTAINERS: add UBIFS section Signed-off-by: Artem Bityutskiy --- MAINTAINERS | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 56a2f678019e..3882f9cf602e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2307,6 +2307,16 @@ L: linux-mtd@lists.infradead.org W: http://www.linux-mtd.infradead.org/doc/jffs2.html S: Maintained +UBI FILE SYSTEM (UBIFS) +P: Artem Bityutskiy +M: dedekind@infradead.org +P: Adrian Hunter +M: ext-adrian.hunter@nokia.com +L: linux-mtd@lists.infradead.org +T: git git://git.infradead.org/~dedekind/ubifs-2.6.git +W: http://www.linux-mtd.infradead.org/doc/ubifs.html +S: Maintained + JFS FILESYSTEM P: Dave Kleikamp M: shaggy@austin.ibm.com -- cgit v1.2.3 From e56a99d5a42dcb91e622ae7a0289d8fb2ddabffb Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 14 Jul 2008 19:08:34 +0300 Subject: UBIFS: add brief documentation Signed-off-by: Artem Bityutskiy Signed-off-by: Adrian Hunter --- Documentation/filesystems/ubifs.txt | 164 ++++++++++++++++++++++++++++++++++++ 1 file changed, 164 insertions(+) create mode 100644 Documentation/filesystems/ubifs.txt diff --git a/Documentation/filesystems/ubifs.txt b/Documentation/filesystems/ubifs.txt new file mode 100644 index 000000000000..540e9e7f59c5 --- /dev/null +++ b/Documentation/filesystems/ubifs.txt @@ -0,0 +1,164 @@ +Introduction +============= + +UBIFS file-system stands for UBI File System. UBI stands for "Unsorted +Block Images". UBIFS is a flash file system, which means it is designed +to work with flash devices. It is important to understand, that UBIFS +is completely different to any traditional file-system in Linux, like +Ext2, XFS, JFS, etc. UBIFS represents a separate class of file-systems +which work with MTD devices, not block devices. The other Linux +file-system of this class is JFFS2. + +To make it more clear, here is a small comparison of MTD devices and +block devices. + +1 MTD devices represent flash devices and they consist of eraseblocks of + rather large size, typically about 128KiB. Block devices consist of + small blocks, typically 512 bytes. +2 MTD devices support 3 main operations - read from some offset within an + eraseblock, write to some offset within an eraseblock, and erase a whole + eraseblock. Block devices support 2 main operations - read a whole + block and write a whole block. +3 The whole eraseblock has to be erased before it becomes possible to + re-write its contents. Blocks may be just re-written. +4 Eraseblocks become worn out after some number of erase cycles - + typically 100K-1G for SLC NAND and NOR flashes, and 1K-10K for MLC + NAND flashes. Blocks do not have the wear-out property. +5 Eraseblocks may become bad (only on NAND flashes) and software should + deal with this. Blocks on hard drives typically do not become bad, + because hardware has mechanisms to substitute bad blocks, at least in + modern LBA disks. + +It should be quite obvious why UBIFS is very different to traditional +file-systems. + +UBIFS works on top of UBI. UBI is a separate software layer which may be +found in drivers/mtd/ubi. UBI is basically a volume management and +wear-leveling layer. It provides so called UBI volumes which is a higher +level abstraction than a MTD device. The programming model of UBI devices +is very similar to MTD devices - they still consist of large eraseblocks, +they have read/write/erase operations, but UBI devices are devoid of +limitations like wear and bad blocks (items 4 and 5 in the above list). + +In a sense, UBIFS is a next generation of JFFS2 file-system, but it is +very different and incompatible to JFFS2. The following are the main +differences. + +* JFFS2 works on top of MTD devices, UBIFS depends on UBI and works on + top of UBI volumes. +* JFFS2 does not have on-media index and has to build it while mounting, + which requires full media scan. UBIFS maintains the FS indexing + information on the flash media and does not require full media scan, + so it mounts many times faster than JFFS2. +* JFFS2 is a write-through file-system, while UBIFS supports write-back, + which makes UBIFS much faster on writes. + +Similarly to JFFS2, UBIFS supports on-the-flight compression which makes +it possible to fit quite a lot of data to the flash. + +Similarly to JFFS2, UBIFS is tolerant of unclean reboots and power-cuts. +It does not need stuff like ckfs.ext2. UBIFS automatically replays its +journal and recovers from crashes, ensuring that the on-flash data +structures are consistent. + +UBIFS scales logarithmically (most of the data structures it uses are +trees), so the mount time and memory consumption do not linearly depend +on the flash size, like in case of JFFS2. This is because UBIFS +maintains the FS index on the flash media. However, UBIFS depends on +UBI, which scales linearly. So overall UBI/UBIFS stack scales linearly. +Nevertheless, UBI/UBIFS scales considerably better than JFFS2. + +The authors of UBIFS believe, that it is possible to develop UBI2 which +would scale logarithmically as well. UBI2 would support the same API as UBI, +but it would be binary incompatible to UBI. So UBIFS would not need to be +changed to use UBI2 + + +Mount options +============= + +(*) == default. + +norm_unmount (*) commit on unmount; the journal is committed + when the file-system is unmounted so that the + next mount does not have to replay the journal + and it becomes very fast; +fast_unmount do not commit on unmount; this option makes + unmount faster, but the next mount slower + because of the need to replay the journal. + + +Quick usage instructions +======================== + +The UBI volume to mount is specified using "ubiX_Y" or "ubiX:NAME" syntax, +where "X" is UBI device number, "Y" is UBI volume number, and "NAME" is +UBI volume name. + +Mount volume 0 on UBI device 0 to /mnt/ubifs: +$ mount -t ubifs ubi0_0 /mnt/ubifs + +Mount "rootfs" volume of UBI device 0 to /mnt/ubifs ("rootfs" is volume +name): +$ mount -t ubifs ubi0:rootfs /mnt/ubifs + +The following is an example of the kernel boot arguments to attach mtd0 +to UBI and mount volume "rootfs": +ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs + + +Module Parameters for Debugging +=============================== + +When UBIFS has been compiled with debugging enabled, there are 3 module +parameters that are available to control aspects of testing and debugging. +The parameters are unsigned integers where each bit controls an option. +The parameters are: + +debug_msgs Selects which debug messages to display, as follows: + + Message Type Flag value + + General messages 1 + Journal messages 2 + Mount messages 4 + Commit messages 8 + LEB search messages 16 + Budgeting messages 32 + Garbage collection messages 64 + Tree Node Cache (TNC) messages 128 + LEB properties (lprops) messages 256 + Input/output messages 512 + Log messages 1024 + Scan messages 2048 + Recovery messages 4096 + +debug_chks Selects extra checks that UBIFS can do while running: + + Check Flag value + + General checks 1 + Check Tree Node Cache (TNC) 2 + Check indexing tree size 4 + Check orphan area 8 + Check old indexing tree 16 + Check LEB properties (lprops) 32 + Check leaf nodes and inodes 64 + +debug_tsts Selects a mode of testing, as follows: + + Test mode Flag value + + Force in-the-gaps method 2 + Failure mode for recovery testing 4 + +For example, set debug_msgs to 5 to display General messages and Mount +messages. + + +References +========== + +UBIFS documentation and FAQ/HOWTO at the MTD web site: +http://www.linux-mtd.infradead.org/doc/ubifs.html +http://www.linux-mtd.infradead.org/faq/ubifs.html -- cgit v1.2.3 From 969a60f9db3f879f95bd37026a3c3bf02cc2568f Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 23:48:43 -0700 Subject: IB/srp: Remove use of cached P_Key/GID queries The SRP initiator is currently using ib_find_cached_pkey() and ib_get_cached_gid() in situations where the uncached ib_find_pkey() and ib_query_gid() functions serve just as well: sleeping is allowed and performance is not an issue. Since we want to eliminate the cached operations in the long term, convert SRP to use the uncached variants. Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/srp/ib_srp.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 435145709dd6..81cc59ca5595 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -49,8 +49,6 @@ #include #include -#include - #include "ib_srp.h" #define DRV_NAME "ib_srp" @@ -183,10 +181,10 @@ static int srp_init_qp(struct srp_target_port *target, if (!attr) return -ENOMEM; - ret = ib_find_cached_pkey(target->srp_host->srp_dev->dev, - target->srp_host->port, - be16_to_cpu(target->path.pkey), - &attr->pkey_index); + ret = ib_find_pkey(target->srp_host->srp_dev->dev, + target->srp_host->port, + be16_to_cpu(target->path.pkey), + &attr->pkey_index); if (ret) goto out; @@ -1883,8 +1881,7 @@ static ssize_t srp_create_target(struct device *dev, if (ret) goto err; - ib_get_cached_gid(host->srp_dev->dev, host->port, 0, - &target->path.sgid); + ib_query_gid(host->srp_dev->dev, host->port, 0, &target->path.sgid); shost_printk(KERN_DEBUG, target->scsi_host, PFX "new target: id_ext %016llx ioc_guid %016llx pkey %04x " -- cgit v1.2.3 From 929555a2baed9b0b050d03532655bfd721a43c44 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Mon, 14 Jul 2008 23:48:43 -0700 Subject: RDMA/nes: Remove unnecessary memset() Remove an explicit memset(..., 0, ...) of a 'listener' structure allocated with kzalloc(). Signed-off-by: Christophe Jaillet Acked-by: Faisal Latif Signed-off-by: Roland Dreier --- drivers/infiniband/hw/nes/nes_cm.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c index 9a4b40fae40d..6aa531d5276d 100644 --- a/drivers/infiniband/hw/nes/nes_cm.c +++ b/drivers/infiniband/hw/nes/nes_cm.c @@ -1603,7 +1603,6 @@ static struct nes_cm_listener *mini_cm_listen(struct nes_cm_core *cm_core, return NULL; } - memset(listener, 0, sizeof(struct nes_cm_listener)); listener->loc_addr = htonl(cm_info->loc_addr); listener->loc_port = htons(cm_info->loc_port); listener->reused_node = 0; -- cgit v1.2.3 From a9474917099e007c0f51d5474394b5890111614f Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Mon, 14 Jul 2008 23:48:43 -0700 Subject: RDMA: Fix license text The license text for several files references a third software license that was inadvertently copied in. Update the license to what was intended. This update was based on a request from HP. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/addr.c | 41 +++++++++++++++++++--------------- drivers/infiniband/core/cma.c | 42 +++++++++++++++++++---------------- include/rdma/ib_addr.h | 42 +++++++++++++++++++---------------- include/rdma/rdma_cm.h | 42 +++++++++++++++++++---------------- include/rdma/rdma_cm_ib.h | 50 +++++++++++++++++++++++------------------- 5 files changed, 119 insertions(+), 98 deletions(-) diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index 781ea5950373..e4eb8be3bb0c 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -4,28 +4,33 @@ * Copyright (c) 1999-2005, Mellanox Technologies, Inc. All rights reserved. * Copyright (c) 2005 Intel Corporation. All rights reserved. * - * This Software is licensed under one of the following licenses: + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: * - * 1) under the terms of the "Common Public License 1.0" a copy of which is - * available from the Open Source Initiative, see - * http://www.opensource.org/licenses/cpl.php. + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: * - * 2) under the terms of the "The BSD License" a copy of which is - * available from the Open Source Initiative, see - * http://www.opensource.org/licenses/bsd-license.php. + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. * - * 3) under the terms of the "GNU General Public License (GPL) Version 2" a - * copy of which is available from the Open Source Initiative, see - * http://www.opensource.org/licenses/gpl-license.php. + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. * - * Licensee has the right to choose one of the above licenses. - * - * Redistributions of source code must retain the above copyright - * notice and one of the license notices. - * - * Redistributions in binary form must reproduce both the above copyright - * notice, one of the license notices in the documentation - * and/or other materials provided with the distribution. + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. */ #include diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 671f13738054..e5bd6172a1f6 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -4,29 +4,33 @@ * Copyright (c) 1999-2005, Mellanox Technologies, Inc. All rights reserved. * Copyright (c) 2005-2006 Intel Corporation. All rights reserved. * - * This Software is licensed under one of the following licenses: + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: * - * 1) under the terms of the "Common Public License 1.0" a copy of which is - * available from the Open Source Initiative, see - * http://www.opensource.org/licenses/cpl.php. + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: * - * 2) under the terms of the "The BSD License" a copy of which is - * available from the Open Source Initiative, see - * http://www.opensource.org/licenses/bsd-license.php. + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. * - * 3) under the terms of the "GNU General Public License (GPL) Version 2" a - * copy of which is available from the Open Source Initiative, see - * http://www.opensource.org/licenses/gpl-license.php. - * - * Licensee has the right to choose one of the above licenses. - * - * Redistributions of source code must retain the above copyright - * notice and one of the license notices. - * - * Redistributions in binary form must reproduce both the above copyright - * notice, one of the license notices in the documentation - * and/or other materials provided with the distribution. + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. */ #include diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h index c36750ff6ae8..b42bdd000419 100644 --- a/include/rdma/ib_addr.h +++ b/include/rdma/ib_addr.h @@ -2,29 +2,33 @@ * Copyright (c) 2005 Voltaire Inc. All rights reserved. * Copyright (c) 2005 Intel Corporation. All rights reserved. * - * This Software is licensed under one of the following licenses: + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: * - * 1) under the terms of the "Common Public License 1.0" a copy of which is - * available from the Open Source Initiative, see - * http://www.opensource.org/licenses/cpl.php. + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: * - * 2) under the terms of the "The BSD License" a copy of which is - * available from the Open Source Initiative, see - * http://www.opensource.org/licenses/bsd-license.php. + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. * - * 3) under the terms of the "GNU General Public License (GPL) Version 2" a - * copy of which is available from the Open Source Initiative, see - * http://www.opensource.org/licenses/gpl-license.php. - * - * Licensee has the right to choose one of the above licenses. - * - * Redistributions of source code must retain the above copyright - * notice and one of the license notices. - * - * Redistributions in binary form must reproduce both the above copyright - * notice, one of the license notices in the documentation - * and/or other materials provided with the distribution. + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. */ #if !defined(IB_ADDR_H) diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h index 010f876f41d8..d8f9a95541c0 100644 --- a/include/rdma/rdma_cm.h +++ b/include/rdma/rdma_cm.h @@ -2,29 +2,33 @@ * Copyright (c) 2005 Voltaire Inc. All rights reserved. * Copyright (c) 2005 Intel Corporation. All rights reserved. * - * This Software is licensed under one of the following licenses: + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: * - * 1) under the terms of the "Common Public License 1.0" a copy of which is - * available from the Open Source Initiative, see - * http://www.opensource.org/licenses/cpl.php. + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: * - * 2) under the terms of the "The BSD License" a copy of which is - * available from the Open Source Initiative, see - * http://www.opensource.org/licenses/bsd-license.php. + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. * - * 3) under the terms of the "GNU General Public License (GPL) Version 2" a - * copy of which is available from the Open Source Initiative, see - * http://www.opensource.org/licenses/gpl-license.php. - * - * Licensee has the right to choose one of the above licenses. - * - * Redistributions of source code must retain the above copyright - * notice and one of the license notices. - * - * Redistributions in binary form must reproduce both the above copyright - * notice, one of the license notices in the documentation - * and/or other materials provided with the distribution. + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. */ #if !defined(RDMA_CM_H) diff --git a/include/rdma/rdma_cm_ib.h b/include/rdma/rdma_cm_ib.h index 950424b38f16..2389c3b45404 100644 --- a/include/rdma/rdma_cm_ib.h +++ b/include/rdma/rdma_cm_ib.h @@ -1,29 +1,33 @@ /* * Copyright (c) 2006 Intel Corporation. All rights reserved. * - * This Software is licensed under one of the following licenses: - * - * 1) under the terms of the "Common Public License 1.0" a copy of which is - * available from the Open Source Initiative, see - * http://www.opensource.org/licenses/cpl.php. - * - * 2) under the terms of the "The BSD License" a copy of which is - * available from the Open Source Initiative, see - * http://www.opensource.org/licenses/bsd-license.php. - * - * 3) under the terms of the "GNU General Public License (GPL) Version 2" a - * copy of which is available from the Open Source Initiative, see - * http://www.opensource.org/licenses/gpl-license.php. - * - * Licensee has the right to choose one of the above licenses. - * - * Redistributions of source code must retain the above copyright - * notice and one of the license notices. - * - * Redistributions in binary form must reproduce both the above copyright - * notice, one of the license notices in the documentation - * and/or other materials provided with the distribution. - * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. */ #if !defined(RDMA_CM_IB_H) -- cgit v1.2.3 From 164ba0893c27a216557396320b6063fdac040392 Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Mon, 14 Jul 2008 23:48:43 -0700 Subject: IB/sa: Fail requests made while creating new SM AH This patch solves a race that occurs after an event occurs that causes the SA query module to flush its SM address handle (AH). When SM AH becomes invalid and needs an update it is handled by the global workqueue. On the other hand this event is also handled in the IPoIB driver by queuing work in the ipoib_workqueue that does multicast joins. Although queuing is in the right order, it is done to 2 different workqueues and so there is no guarantee that the first to be queued is the first to be executed. This causes a problem because IPoIB may end up sending an request to the old SM, which will take a long time to time out (since the old SM is gone); this leads to a much longer than necessary interruption in multicast traffer. The patch sets the SA query module's SM AH to NULL when the event occurs, and until update_sm_ah() is done, any request that needs sm_ah fails with -EAGAIN return status. For consumers, the patch doesn't make things worse. Before the patch, MADs are sent to the wrong SM so the request gets lost. Consumers can be improved if they examine the return code and respond to EAGAIN properly but even without an improvement the situation is not getting worse. Signed-off-by: Moni Levy Signed-off-by: Moni Shoua Signed-off-by: Roland Dreier --- drivers/infiniband/core/sa_query.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index cf474ec27070..78ea8157d622 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -361,7 +361,7 @@ static void update_sm_ah(struct work_struct *work) { struct ib_sa_port *port = container_of(work, struct ib_sa_port, update_task); - struct ib_sa_sm_ah *new_ah, *old_ah; + struct ib_sa_sm_ah *new_ah; struct ib_port_attr port_attr; struct ib_ah_attr ah_attr; @@ -397,12 +397,9 @@ static void update_sm_ah(struct work_struct *work) } spin_lock_irq(&port->ah_lock); - old_ah = port->sm_ah; port->sm_ah = new_ah; spin_unlock_irq(&port->ah_lock); - if (old_ah) - kref_put(&old_ah->ref, free_sm_ah); } static void ib_sa_event(struct ib_event_handler *handler, struct ib_event *event) @@ -413,8 +410,17 @@ static void ib_sa_event(struct ib_event_handler *handler, struct ib_event *event event->event == IB_EVENT_PKEY_CHANGE || event->event == IB_EVENT_SM_CHANGE || event->event == IB_EVENT_CLIENT_REREGISTER) { - struct ib_sa_device *sa_dev; - sa_dev = container_of(handler, typeof(*sa_dev), event_handler); + unsigned long flags; + struct ib_sa_device *sa_dev = + container_of(handler, typeof(*sa_dev), event_handler); + struct ib_sa_port *port = + &sa_dev->port[event->element.port_num - sa_dev->start_port]; + + spin_lock_irqsave(&port->ah_lock, flags); + if (port->sm_ah) + kref_put(&port->sm_ah->ref, free_sm_ah); + port->sm_ah = NULL; + spin_unlock_irqrestore(&port->ah_lock, flags); schedule_work(&sa_dev->port[event->element.port_num - sa_dev->start_port].update_task); @@ -519,6 +525,10 @@ static int alloc_mad(struct ib_sa_query *query, gfp_t gfp_mask) unsigned long flags; spin_lock_irqsave(&query->port->ah_lock, flags); + if (!query->port->sm_ah) { + spin_unlock_irqrestore(&query->port->ah_lock, flags); + return -EAGAIN; + } kref_get(&query->port->sm_ah->ref); query->sm_ah = query->port->sm_ah; spin_unlock_irqrestore(&query->port->ah_lock, flags); -- cgit v1.2.3 From 9670e553915e67fb68f13258644342c68dc26b84 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 14 Jul 2008 23:48:44 -0700 Subject: IB/mlx4: Optimize QP stamping The idea is that for QPs with fixed size work requests (eg selective signaling QPs), before stamping the WQE, we read the value of the DS field, which gives the effective size of the descriptor as used in the previous post. Then we stamp only that area, since the rest of the descriptor is already stamped. When initializing the send queue buffer, make sure the DS field is initialized to the max descriptor size so that the subsequent stamping will be done on the entire descriptor area. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/qp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index a80df22deae8..4b0ac5d68c46 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -129,9 +129,10 @@ static void stamp_send_wqe(struct mlx4_ib_qp *qp, int n, int size) int ind; void *buf; __be32 stamp; + struct mlx4_wqe_ctrl_seg *ctrl; - s = roundup(size, 1U << qp->sq.wqe_shift); if (qp->sq_max_wqes_per_wr > 1) { + s = roundup(size, 1U << qp->sq.wqe_shift); for (i = 0; i < s; i += 64) { ind = (i >> qp->sq.wqe_shift) + n; stamp = ind & qp->sq.wqe_cnt ? cpu_to_be32(0x7fffffff) : @@ -141,7 +142,8 @@ static void stamp_send_wqe(struct mlx4_ib_qp *qp, int n, int size) *wqe = stamp; } } else { - buf = get_send_wqe(qp, n & (qp->sq.wqe_cnt - 1)); + ctrl = buf = get_send_wqe(qp, n & (qp->sq.wqe_cnt - 1)); + s = (ctrl->fence_size & 0x3f) << 4; for (i = 64; i < s; i += 64) { wqe = buf + i; *wqe = cpu_to_be32(0xffffffff); @@ -1063,6 +1065,8 @@ static int __mlx4_ib_modify_qp(struct ib_qp *ibqp, for (i = 0; i < qp->sq.wqe_cnt; ++i) { ctrl = get_send_wqe(qp, i); ctrl->owner_opcode = cpu_to_be32(1 << 31); + if (qp->sq_max_wqes_per_wr == 1) + ctrl->fence_size = 1 << (qp->sq.wqe_shift - 4); stamp_send_wqe(qp, i, 1 << qp->sq.wqe_shift); } -- cgit v1.2.3 From fd91b1bf1bb6fb443cb8c7600c7314f093b31f40 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Mon, 14 Jul 2008 23:48:44 -0700 Subject: IB/ipath: Simplify code using ARRAY_SIZE() macro Signed-off-by: Robert P. J. Day Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_iba7220.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c index 8eee7830f042..fb70712ac85c 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba7220.c +++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c @@ -2228,8 +2228,8 @@ static void ipath_autoneg_send(struct ipath_devdata *dd, int which) 0xffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40000001, 0x1388, 0x15e, /* rest 0's */ }; - dcnt = sizeof(madpayload_start)/sizeof(madpayload_start[0]); - hcnt = sizeof(hdr)/sizeof(hdr[0]); + dcnt = ARRAY_SIZE(madpayload_start); + hcnt = ARRAY_SIZE(hdr); if (!swapped) { /* for maintainability, do it at runtime */ for (i = 0; i < hcnt; i++) { -- cgit v1.2.3 From 4deccd6d95f1f1536dad3c842e39c1ace577329d Mon Sep 17 00:00:00 2001 From: Dotan Barak Date: Mon, 14 Jul 2008 23:48:44 -0700 Subject: RDMA: Improve include file coding style Remove subversion $Id lines and improve readability by fixing other coding style problems pointed out by checkpatch.pl. Signed-off-by: Dotan Barak Signed-off-by: Roland Dreier --- include/rdma/ib_cache.h | 2 -- include/rdma/ib_cm.h | 2 -- include/rdma/ib_fmr_pool.h | 4 +--- include/rdma/ib_mad.h | 17 +++++++---------- include/rdma/ib_pack.h | 2 -- include/rdma/ib_sa.h | 2 -- include/rdma/ib_smi.h | 4 +--- include/rdma/ib_user_cm.h | 2 -- include/rdma/ib_user_mad.h | 2 -- include/rdma/ib_user_verbs.h | 2 -- include/rdma/ib_verbs.h | 6 ++---- include/rdma/iw_cm.h | 2 +- include/rdma/rdma_cm.h | 10 +++++----- 13 files changed, 17 insertions(+), 40 deletions(-) diff --git a/include/rdma/ib_cache.h b/include/rdma/ib_cache.h index f179d233ffc3..00a2b8ec327f 100644 --- a/include/rdma/ib_cache.h +++ b/include/rdma/ib_cache.h @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ib_cache.h 1349 2004-12-16 21:09:43Z roland $ */ #ifndef _IB_CACHE_H diff --git a/include/rdma/ib_cm.h b/include/rdma/ib_cm.h index a627c8682d2f..ec7c6d99ed3f 100644 --- a/include/rdma/ib_cm.h +++ b/include/rdma/ib_cm.h @@ -31,8 +31,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ib_cm.h 4311 2005-12-05 18:42:01Z sean.hefty $ */ #if !defined(IB_CM_H) #define IB_CM_H diff --git a/include/rdma/ib_fmr_pool.h b/include/rdma/ib_fmr_pool.h index 00dadbf94e1d..f62b842e6596 100644 --- a/include/rdma/ib_fmr_pool.h +++ b/include/rdma/ib_fmr_pool.h @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ib_fmr_pool.h 2730 2005-06-28 16:43:03Z sean.hefty $ */ #if !defined(IB_FMR_POOL_H) @@ -61,7 +59,7 @@ struct ib_fmr_pool_param { int pool_size; int dirty_watermark; void (*flush_function)(struct ib_fmr_pool *pool, - void * arg); + void *arg); void *flush_arg; unsigned cache:1; }; diff --git a/include/rdma/ib_mad.h b/include/rdma/ib_mad.h index 7228c056b9e9..5f6c40fffcf4 100644 --- a/include/rdma/ib_mad.h +++ b/include/rdma/ib_mad.h @@ -32,11 +32,9 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ib_mad.h 5596 2006-03-03 01:00:07Z sean.hefty $ */ -#if !defined( IB_MAD_H ) +#if !defined(IB_MAD_H) #define IB_MAD_H #include @@ -194,8 +192,7 @@ struct ib_vendor_mad { u8 data[IB_MGMT_VENDOR_DATA]; }; -struct ib_class_port_info -{ +struct ib_class_port_info { u8 base_version; u8 class_version; __be16 capability_mask; @@ -614,11 +611,11 @@ int ib_process_mad_wc(struct ib_mad_agent *mad_agent, * any class specific header, and MAD data area. * If @rmpp_active is set, the RMPP header will be initialized for sending. */ -struct ib_mad_send_buf * ib_create_send_mad(struct ib_mad_agent *mad_agent, - u32 remote_qpn, u16 pkey_index, - int rmpp_active, - int hdr_len, int data_len, - gfp_t gfp_mask); +struct ib_mad_send_buf *ib_create_send_mad(struct ib_mad_agent *mad_agent, + u32 remote_qpn, u16 pkey_index, + int rmpp_active, + int hdr_len, int data_len, + gfp_t gfp_mask); /** * ib_is_mad_class_rmpp - returns whether given management class diff --git a/include/rdma/ib_pack.h b/include/rdma/ib_pack.h index f926020d6331..d7fc45c4eba9 100644 --- a/include/rdma/ib_pack.h +++ b/include/rdma/ib_pack.h @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ib_pack.h 1349 2004-12-16 21:09:43Z roland $ */ #ifndef IB_PACK_H diff --git a/include/rdma/ib_sa.h b/include/rdma/ib_sa.h index 942692b0b92e..3841c1aff692 100644 --- a/include/rdma/ib_sa.h +++ b/include/rdma/ib_sa.h @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ib_sa.h 2811 2005-07-06 18:11:43Z halr $ */ #ifndef IB_SA_H diff --git a/include/rdma/ib_smi.h b/include/rdma/ib_smi.h index f29af135ba83..aaca0878668f 100644 --- a/include/rdma/ib_smi.h +++ b/include/rdma/ib_smi.h @@ -32,11 +32,9 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ib_smi.h 1389 2004-12-27 22:56:47Z roland $ */ -#if !defined( IB_SMI_H ) +#if !defined(IB_SMI_H) #define IB_SMI_H #include diff --git a/include/rdma/ib_user_cm.h b/include/rdma/ib_user_cm.h index 37650afb982c..bd3d380781e0 100644 --- a/include/rdma/ib_user_cm.h +++ b/include/rdma/ib_user_cm.h @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ib_user_cm.h 4019 2005-11-11 00:33:09Z sean.hefty $ */ #ifndef IB_USER_CM_H diff --git a/include/rdma/ib_user_mad.h b/include/rdma/ib_user_mad.h index 29d2c7205a90..d6fce1cbdb90 100644 --- a/include/rdma/ib_user_mad.h +++ b/include/rdma/ib_user_mad.h @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ib_user_mad.h 2814 2005-07-06 19:14:09Z halr $ */ #ifndef IB_USER_MAD_H diff --git a/include/rdma/ib_user_verbs.h b/include/rdma/ib_user_verbs.h index 8d65bf0a625b..885254f20bb3 100644 --- a/include/rdma/ib_user_verbs.h +++ b/include/rdma/ib_user_verbs.h @@ -31,8 +31,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ib_user_verbs.h 4019 2005-11-11 00:33:09Z sean.hefty $ */ #ifndef IB_USER_VERBS_H diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 31d30b1852e8..5f5621bf70bd 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -34,8 +34,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ib_verbs.h 1349 2004-12-16 21:09:43Z roland $ */ #if !defined(IB_VERBS_H) @@ -777,7 +775,7 @@ struct ib_cq { struct ib_uobject *uobject; ib_comp_handler comp_handler; void (*event_handler)(struct ib_event *, void *); - void * cq_context; + void *cq_context; int cqe; atomic_t usecnt; /* count number of work queues */ }; @@ -883,7 +881,7 @@ struct ib_dma_mapping_ops { void (*sync_single_for_cpu)(struct ib_device *dev, u64 dma_handle, size_t size, - enum dma_data_direction dir); + enum dma_data_direction dir); void (*sync_single_for_device)(struct ib_device *dev, u64 dma_handle, size_t size, diff --git a/include/rdma/iw_cm.h b/include/rdma/iw_cm.h index aeefa9b740dc..cbb822e8d791 100644 --- a/include/rdma/iw_cm.h +++ b/include/rdma/iw_cm.h @@ -62,7 +62,7 @@ struct iw_cm_event { struct sockaddr_in remote_addr; void *private_data; u8 private_data_len; - void* provider_data; + void *provider_data; }; /** diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h index d8f9a95541c0..22bb2e7bab1a 100644 --- a/include/rdma/rdma_cm.h +++ b/include/rdma/rdma_cm.h @@ -61,11 +61,11 @@ enum rdma_cm_event_type { }; enum rdma_port_space { - RDMA_PS_SDP = 0x0001, - RDMA_PS_IPOIB= 0x0002, - RDMA_PS_TCP = 0x0106, - RDMA_PS_UDP = 0x0111, - RDMA_PS_SCTP = 0x0183 + RDMA_PS_SDP = 0x0001, + RDMA_PS_IPOIB = 0x0002, + RDMA_PS_TCP = 0x0106, + RDMA_PS_UDP = 0x0111, + RDMA_PS_SCTP = 0x0183 }; struct rdma_addr { -- cgit v1.2.3 From f3781d2e89f12dd5afa046dc56032af6e39bd116 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 23:48:44 -0700 Subject: RDMA: Remove subversion $Id tags They don't get updated by git and so they're worse than useless. Signed-off-by: Roland Dreier --- drivers/infiniband/core/agent.h | 2 -- drivers/infiniband/core/cache.c | 2 -- drivers/infiniband/core/cm.c | 2 -- drivers/infiniband/core/core_priv.h | 2 -- drivers/infiniband/core/device.c | 2 -- drivers/infiniband/core/fmr_pool.c | 2 -- drivers/infiniband/core/mad_priv.h | 2 -- drivers/infiniband/core/mad_rmpp.c | 2 -- drivers/infiniband/core/mad_rmpp.h | 2 -- drivers/infiniband/core/packer.c | 2 -- drivers/infiniband/core/sa_query.c | 2 -- drivers/infiniband/core/sysfs.c | 2 -- drivers/infiniband/core/ucm.c | 2 -- drivers/infiniband/core/ud_header.c | 2 -- drivers/infiniband/core/umem.c | 2 -- drivers/infiniband/core/user_mad.c | 2 -- drivers/infiniband/core/uverbs.h | 2 -- drivers/infiniband/core/uverbs_cmd.c | 2 -- drivers/infiniband/core/uverbs_main.c | 2 -- drivers/infiniband/core/verbs.c | 2 -- drivers/infiniband/hw/mthca/mthca_allocator.c | 2 -- drivers/infiniband/hw/mthca/mthca_av.c | 2 -- drivers/infiniband/hw/mthca/mthca_catas.c | 2 -- drivers/infiniband/hw/mthca/mthca_cmd.c | 2 -- drivers/infiniband/hw/mthca/mthca_cmd.h | 2 -- drivers/infiniband/hw/mthca/mthca_config_reg.h | 2 -- drivers/infiniband/hw/mthca/mthca_cq.c | 2 -- drivers/infiniband/hw/mthca/mthca_dev.h | 2 -- drivers/infiniband/hw/mthca/mthca_doorbell.h | 2 -- drivers/infiniband/hw/mthca/mthca_eq.c | 2 -- drivers/infiniband/hw/mthca/mthca_mad.c | 2 -- drivers/infiniband/hw/mthca/mthca_main.c | 2 -- drivers/infiniband/hw/mthca/mthca_mcg.c | 2 -- drivers/infiniband/hw/mthca/mthca_memfree.c | 2 -- drivers/infiniband/hw/mthca/mthca_memfree.h | 2 -- drivers/infiniband/hw/mthca/mthca_mr.c | 2 -- drivers/infiniband/hw/mthca/mthca_pd.c | 2 -- drivers/infiniband/hw/mthca/mthca_profile.c | 2 -- drivers/infiniband/hw/mthca/mthca_profile.h | 2 -- drivers/infiniband/hw/mthca/mthca_provider.c | 2 -- drivers/infiniband/hw/mthca/mthca_provider.h | 2 -- drivers/infiniband/hw/mthca/mthca_qp.c | 2 -- drivers/infiniband/hw/mthca/mthca_reset.c | 2 -- drivers/infiniband/hw/mthca/mthca_srq.c | 2 -- drivers/infiniband/hw/mthca/mthca_uar.c | 2 -- drivers/infiniband/hw/mthca/mthca_user.h | 1 - drivers/infiniband/hw/mthca/mthca_wqe.h | 2 -- drivers/infiniband/ulp/ipoib/ipoib.h | 2 -- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 -- drivers/infiniband/ulp/ipoib/ipoib_fs.c | 2 -- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 2 -- drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 -- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 2 -- drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 2 -- drivers/infiniband/ulp/ipoib/ipoib_vlan.c | 2 -- drivers/infiniband/ulp/iser/iscsi_iser.c | 3 --- drivers/infiniband/ulp/iser/iscsi_iser.h | 2 -- drivers/infiniband/ulp/iser/iser_initiator.c | 2 -- drivers/infiniband/ulp/iser/iser_memory.c | 2 -- drivers/infiniband/ulp/iser/iser_verbs.c | 2 -- drivers/infiniband/ulp/srp/ib_srp.c | 2 -- drivers/infiniband/ulp/srp/ib_srp.h | 2 -- 62 files changed, 124 deletions(-) diff --git a/drivers/infiniband/core/agent.h b/drivers/infiniband/core/agent.h index fb9ed1489f95..6669287009c2 100644 --- a/drivers/infiniband/core/agent.h +++ b/drivers/infiniband/core/agent.h @@ -32,8 +32,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: agent.h 1389 2004-12-27 22:56:47Z roland $ */ #ifndef __AGENT_H_ diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index e85f7013de57..68883565b725 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -31,8 +31,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: cache.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index a47fe64e5c39..55738eead3bf 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -31,8 +31,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: cm.c 4311 2005-12-05 18:42:01Z sean.hefty $ */ #include diff --git a/drivers/infiniband/core/core_priv.h b/drivers/infiniband/core/core_priv.h index 7ad47a4b166b..05ac36e6acdb 100644 --- a/drivers/infiniband/core/core_priv.h +++ b/drivers/infiniband/core/core_priv.h @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: core_priv.h 1349 2004-12-16 21:09:43Z roland $ */ #ifndef _CORE_PRIV_H diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index 5ac5ffee05cb..7913b804311e 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: device.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c index 1286dc1b98b2..4507043d24c8 100644 --- a/drivers/infiniband/core/fmr_pool.c +++ b/drivers/infiniband/core/fmr_pool.c @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: fmr_pool.c 2730 2005-06-28 16:43:03Z sean.hefty $ */ #include diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h index 8b75010016ec..05ce331733b0 100644 --- a/drivers/infiniband/core/mad_priv.h +++ b/drivers/infiniband/core/mad_priv.h @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mad_priv.h 5596 2006-03-03 01:00:07Z sean.hefty $ */ #ifndef __IB_MAD_PRIV_H__ diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c index a5e2a310f312..d0ef7d61c037 100644 --- a/drivers/infiniband/core/mad_rmpp.c +++ b/drivers/infiniband/core/mad_rmpp.c @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mad_rmpp.c 1921 2005-03-02 22:58:44Z sean.hefty $ */ #include "mad_priv.h" diff --git a/drivers/infiniband/core/mad_rmpp.h b/drivers/infiniband/core/mad_rmpp.h index f0616fd22494..3d336bff1148 100644 --- a/drivers/infiniband/core/mad_rmpp.h +++ b/drivers/infiniband/core/mad_rmpp.h @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mad_rmpp.h 1921 2005-02-25 22:58:44Z sean.hefty $ */ #ifndef __MAD_RMPP_H__ diff --git a/drivers/infiniband/core/packer.c b/drivers/infiniband/core/packer.c index c972d7235764..019bd4b0863e 100644 --- a/drivers/infiniband/core/packer.c +++ b/drivers/infiniband/core/packer.c @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: packer.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index 78ea8157d622..1341de793e51 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: sa_query.c 2811 2005-07-06 18:11:43Z halr $ */ #include diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 95756551cf7c..36a0ef97c6a5 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: sysfs.c 1349 2004-12-16 21:09:43Z roland $ */ #include "core_priv.h" diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c index b25675faaaf5..9494005d1c9a 100644 --- a/drivers/infiniband/core/ucm.c +++ b/drivers/infiniband/core/ucm.c @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ucm.c 4311 2005-12-05 18:42:01Z sean.hefty $ */ #include diff --git a/drivers/infiniband/core/ud_header.c b/drivers/infiniband/core/ud_header.c index 997c07db6d8f..8ec7876bedcf 100644 --- a/drivers/infiniband/core/ud_header.c +++ b/drivers/infiniband/core/ud_header.c @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ud_header.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c index a1768dbb0720..6f7c096abf13 100644 --- a/drivers/infiniband/core/umem.c +++ b/drivers/infiniband/core/umem.c @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: uverbs_mem.c 2743 2005-06-28 22:27:59Z roland $ */ #include diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 208c7f34323c..268a2d23b7c9 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -31,8 +31,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: user_mad.c 5596 2006-03-03 01:00:07Z sean.hefty $ */ #include diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h index 376a57ce1b40..b3ea9587dc80 100644 --- a/drivers/infiniband/core/uverbs.h +++ b/drivers/infiniband/core/uverbs.h @@ -32,8 +32,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: uverbs.h 2559 2005-06-06 19:43:16Z roland $ */ #ifndef UVERBS_H diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 2c3bff5fe867..112b37cd6895 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -31,8 +31,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: uverbs_cmd.c 2708 2005-06-24 17:27:21Z roland $ */ #include diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 0f34858e31e7..aeee856c4060 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -32,8 +32,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: uverbs_main.c 2733 2005-06-28 19:14:34Z roland $ */ #include diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 05042089de6e..9f399d3a42b4 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -34,8 +34,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: verbs.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_allocator.c b/drivers/infiniband/hw/mthca/mthca_allocator.c index a76306709618..c5ccc2daab60 100644 --- a/drivers/infiniband/hw/mthca/mthca_allocator.c +++ b/drivers/infiniband/hw/mthca/mthca_allocator.c @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_allocator.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_av.c b/drivers/infiniband/hw/mthca/mthca_av.c index 4b111a852ff6..32f6c6315454 100644 --- a/drivers/infiniband/hw/mthca/mthca_av.c +++ b/drivers/infiniband/hw/mthca/mthca_av.c @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_av.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_catas.c b/drivers/infiniband/hw/mthca/mthca_catas.c index e948158a28d9..40573e48439c 100644 --- a/drivers/infiniband/hw/mthca/mthca_catas.c +++ b/drivers/infiniband/hw/mthca/mthca_catas.c @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id$ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index 54d230ee7d63..c33e1c53c799 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_cmd.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.h b/drivers/infiniband/hw/mthca/mthca_cmd.h index 8928ca4a9325..6efd3265f248 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.h +++ b/drivers/infiniband/hw/mthca/mthca_cmd.h @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_cmd.h 1349 2004-12-16 21:09:43Z roland $ */ #ifndef MTHCA_CMD_H diff --git a/drivers/infiniband/hw/mthca/mthca_config_reg.h b/drivers/infiniband/hw/mthca/mthca_config_reg.h index afa56bfaab2e..75671f75cac4 100644 --- a/drivers/infiniband/hw/mthca/mthca_config_reg.h +++ b/drivers/infiniband/hw/mthca/mthca_config_reg.h @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_config_reg.h 1349 2004-12-16 21:09:43Z roland $ */ #ifndef MTHCA_CONFIG_REG_H diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c index 20401d2ba6b2..f788fce71ac7 100644 --- a/drivers/infiniband/hw/mthca/mthca_cq.c +++ b/drivers/infiniband/hw/mthca/mthca_cq.c @@ -32,8 +32,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_cq.c 1369 2004-12-20 16:17:07Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index 7bc32f8e377e..2997d8d564ea 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -32,8 +32,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_dev.h 1349 2004-12-16 21:09:43Z roland $ */ #ifndef MTHCA_DEV_H diff --git a/drivers/infiniband/hw/mthca/mthca_doorbell.h b/drivers/infiniband/hw/mthca/mthca_doorbell.h index b374dc395be1..14f51ef97d7e 100644 --- a/drivers/infiniband/hw/mthca/mthca_doorbell.h +++ b/drivers/infiniband/hw/mthca/mthca_doorbell.h @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_doorbell.h 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c index 8bde7f98e58a..4e36aa7cb3d2 100644 --- a/drivers/infiniband/hw/mthca/mthca_eq.c +++ b/drivers/infiniband/hw/mthca/mthca_eq.c @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_eq.c 1382 2004-12-24 02:21:02Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c index 8b7e83e6e88f..640449582aba 100644 --- a/drivers/infiniband/hw/mthca/mthca_mad.c +++ b/drivers/infiniband/hw/mthca/mthca_mad.c @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_mad.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 200cf13fc9bb..fb9f91b60f30 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_main.c 1396 2004-12-28 04:10:27Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_mcg.c b/drivers/infiniband/hw/mthca/mthca_mcg.c index a8ad072be074..3f5f94879208 100644 --- a/drivers/infiniband/hw/mthca/mthca_mcg.c +++ b/drivers/infiniband/hw/mthca/mthca_mcg.c @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_mcg.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index d5862e5d99a0..1f7d1a29d2a8 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id$ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.h b/drivers/infiniband/hw/mthca/mthca_memfree.h index a1ab06847b75..da9b8f9b884f 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.h +++ b/drivers/infiniband/hw/mthca/mthca_memfree.h @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id$ */ #ifndef MTHCA_MEMFREE_H diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c index 820205dec560..8489b1e81c0f 100644 --- a/drivers/infiniband/hw/mthca/mthca_mr.c +++ b/drivers/infiniband/hw/mthca/mthca_mr.c @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_mr.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_pd.c b/drivers/infiniband/hw/mthca/mthca_pd.c index c1e950764bd8..266f14e47406 100644 --- a/drivers/infiniband/hw/mthca/mthca_pd.c +++ b/drivers/infiniband/hw/mthca/mthca_pd.c @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_pd.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_profile.c b/drivers/infiniband/hw/mthca/mthca_profile.c index 605a8d57fac6..d168c2540611 100644 --- a/drivers/infiniband/hw/mthca/mthca_profile.c +++ b/drivers/infiniband/hw/mthca/mthca_profile.c @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_profile.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_profile.h b/drivers/infiniband/hw/mthca/mthca_profile.h index e76cb62d8e32..62b009cc8730 100644 --- a/drivers/infiniband/hw/mthca/mthca_profile.h +++ b/drivers/infiniband/hw/mthca/mthca_profile.h @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_profile.h 1349 2004-12-16 21:09:43Z roland $ */ #ifndef MTHCA_PROFILE_H diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c index be34f99ca625..87ad889e367b 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.c +++ b/drivers/infiniband/hw/mthca/mthca_provider.c @@ -32,8 +32,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_provider.c 4859 2006-01-09 21:55:10Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h index 934bf9544037..c621f8794b88 100644 --- a/drivers/infiniband/hw/mthca/mthca_provider.h +++ b/drivers/infiniband/hw/mthca/mthca_provider.h @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_provider.h 1349 2004-12-16 21:09:43Z roland $ */ #ifndef MTHCA_PROVIDER_H diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 09dc3614cf2c..3b1c5baf13b1 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -31,8 +31,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_qp.c 1355 2004-12-17 15:23:43Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_reset.c b/drivers/infiniband/hw/mthca/mthca_reset.c index 91934f2d9dba..acb6817f6060 100644 --- a/drivers/infiniband/hw/mthca/mthca_reset.c +++ b/drivers/infiniband/hw/mthca/mthca_reset.c @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_reset.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c index a5ffff6e1026..4fabe62aab8a 100644 --- a/drivers/infiniband/hw/mthca/mthca_srq.c +++ b/drivers/infiniband/hw/mthca/mthca_srq.c @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_srq.c 3047 2005-08-10 03:59:35Z roland $ */ #include diff --git a/drivers/infiniband/hw/mthca/mthca_uar.c b/drivers/infiniband/hw/mthca/mthca_uar.c index 8b728486410d..ca5900c96fcf 100644 --- a/drivers/infiniband/hw/mthca/mthca_uar.c +++ b/drivers/infiniband/hw/mthca/mthca_uar.c @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id$ */ #include /* PAGE_SHIFT */ diff --git a/drivers/infiniband/hw/mthca/mthca_user.h b/drivers/infiniband/hw/mthca/mthca_user.h index e1262c942db8..5fe56e810739 100644 --- a/drivers/infiniband/hw/mthca/mthca_user.h +++ b/drivers/infiniband/hw/mthca/mthca_user.h @@ -29,7 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * */ #ifndef MTHCA_USER_H diff --git a/drivers/infiniband/hw/mthca/mthca_wqe.h b/drivers/infiniband/hw/mthca/mthca_wqe.h index b3551a8dea1d..341a5ae881c1 100644 --- a/drivers/infiniband/hw/mthca/mthca_wqe.h +++ b/drivers/infiniband/hw/mthca/mthca_wqe.h @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: mthca_wqe.h 3047 2005-08-10 03:59:35Z roland $ */ #ifndef MTHCA_WQE_H diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index ca126fc2b853..0dcbab3203c9 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ipoib.h 1358 2004-12-17 22:00:11Z roland $ */ #ifndef _IPOIB_H diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 97e67d36378f..91c959299910 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id$ */ #include diff --git a/drivers/infiniband/ulp/ipoib/ipoib_fs.c b/drivers/infiniband/ulp/ipoib/ipoib_fs.c index 8b882bbd1d05..961c585da216 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_fs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_fs.c @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ipoib_fs.c 1389 2004-12-27 22:56:47Z roland $ */ #include diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index f429bce24c20..eca8518d79a0 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -31,8 +31,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ipoib_ib.c 1386 2004-12-27 16:23:17Z roland $ */ #include diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 2442090ac8d1..f217b1edd0ac 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ipoib_main.c 1377 2004-12-23 19:57:12Z roland $ */ #include "ipoib.h" diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 3f663fb852c1..4a6538b9301a 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -30,8 +30,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ipoib_multicast.c 1362 2004-12-18 15:56:29Z roland $ */ #include diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index 8766d29ce3b7..810790ae7530 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ipoib_verbs.c 1349 2004-12-16 21:09:43Z roland $ */ #include "ipoib.h" diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c index 1cdb5cfb0ff1..b08eb56196d3 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ipoib_vlan.c 1349 2004-12-16 21:09:43Z roland $ */ #include diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c index aeb58cae9a3f..356fac6d105a 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.c +++ b/drivers/infiniband/ulp/iser/iscsi_iser.c @@ -42,9 +42,6 @@ * Zhenyu Wang * Modified by: * Erez Zilber - * - * - * $Id: iscsi_iser.c 6965 2006-05-07 11:36:20Z ogerlitz $ */ #include diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h index a8c1b300e34d..0e10703cf59e 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.h +++ b/drivers/infiniband/ulp/iser/iscsi_iser.h @@ -36,8 +36,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: iscsi_iser.h 7051 2006-05-10 12:29:11Z ogerlitz $ */ #ifndef __ISCSI_ISER_H__ #define __ISCSI_ISER_H__ diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c index 08dc81c46f41..31ad498bdc51 100644 --- a/drivers/infiniband/ulp/iser/iser_initiator.c +++ b/drivers/infiniband/ulp/iser/iser_initiator.c @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: iser_initiator.c 6964 2006-05-07 11:11:43Z ogerlitz $ */ #include #include diff --git a/drivers/infiniband/ulp/iser/iser_memory.c b/drivers/infiniband/ulp/iser/iser_memory.c index cac50c4dc159..81e49cb10ed3 100644 --- a/drivers/infiniband/ulp/iser/iser_memory.c +++ b/drivers/infiniband/ulp/iser/iser_memory.c @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: iser_memory.c 6964 2006-05-07 11:11:43Z ogerlitz $ */ #include #include diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c index d19cfe605ebb..77cabee7cc08 100644 --- a/drivers/infiniband/ulp/iser/iser_verbs.c +++ b/drivers/infiniband/ulp/iser/iser_verbs.c @@ -29,8 +29,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: iser_verbs.c 7051 2006-05-10 12:29:11Z ogerlitz $ */ #include #include diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c index 81cc59ca5595..ed7c5f72cb8b 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.c +++ b/drivers/infiniband/ulp/srp/ib_srp.c @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ib_srp.c 3932 2005-11-01 17:19:29Z roland $ */ #include diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h index 63d2ae724061..e185b907fc12 100644 --- a/drivers/infiniband/ulp/srp/ib_srp.h +++ b/drivers/infiniband/ulp/srp/ib_srp.h @@ -28,8 +28,6 @@ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. - * - * $Id: ib_srp.h 3932 2005-11-01 17:19:29Z roland $ */ #ifndef IB_SRP_H -- cgit v1.2.3 From f89271da32bc1a636cf4eb078e615930886cd013 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 14 Jul 2008 23:48:44 -0700 Subject: IPoIB: Copy small received SKBs in connected mode The connected mode implementation in the IPoIB driver has a large overhead in the way SKBs are handled in the receive flow. It usually allocates an SKB with as big as was used in the currently received SKB and moves unused fragments from the old SKB to the new one. This involves a loop on all the remaining fragments and incurs overhead on the CPU. This patch, for small SKBs, allocates an SKB just large enough to contain the received data and copies to it the data from the received SKB. The newly allocated SKB is passed to the stack and the old SKB is reposted. When running netperf, UDP small messages, without this pach I get: UDP UNIDIRECTIONAL SEND TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 14.4.3.178 (14.4.3.178) port 0 AF_INET Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 114688 128 10.00 5142034 0 526.31 114688 10.00 1130489 115.71 With this patch I get both send and receive at ~315 mbps. The reason that send performance actually slows down is as follows: When using this patch, the overhead of the CPU for handling RX packets is dramatically reduced. As a result, we do not experience RNR NAK messages from the receiver which cause the connection to be closed and reopened again; when the patch is not used, the receiver cannot handle the packets fast enough so there is less time to post new buffers and hence the mentioned RNR NACKs. So what happens is that the application *thinks* it posted a certain number of packets for transmission but these packets are flushed and do not really get transmitted. Since the connection gets opened and closed many times, each time netperf gets the CPU time that otherwise would have been given to IPoIB to actually transmit the packets. This can be verified when looking at the port counters -- the output of ifconfig and the oputput of netperf (this is for the case without the patch): tx packets ========== port counter: 1,543,996 ifconfig: 1,581,426 netperf: 5,142,034 rx packets ========== netperf 1,1304,089 Signed-off-by: Eli Cohen --- drivers/infiniband/ulp/ipoib/ipoib.h | 1 + drivers/infiniband/ulp/ipoib/ipoib_cm.c | 19 +++++++++++++++++++ drivers/infiniband/ulp/ipoib/ipoib_main.c | 6 ++++++ 3 files changed, 26 insertions(+) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 0dcbab3203c9..8754b364f229 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -95,6 +95,7 @@ enum { IPOIB_MCAST_FLAG_ATTACHED = 3, MAX_SEND_CQE = 16, + IPOIB_CM_COPYBREAK = 256, }; #define IPOIB_OP_RECV (1ul << 31) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 91c959299910..6223fc39af70 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -523,6 +523,7 @@ void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) u64 mapping[IPOIB_CM_RX_SG]; int frags; int has_srq; + struct sk_buff *small_skb; ipoib_dbg_data(priv, "cm recv completion: id %d, status: %d\n", wr_id, wc->status); @@ -577,6 +578,23 @@ void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) } } + if (wc->byte_len < IPOIB_CM_COPYBREAK) { + int dlen = wc->byte_len; + + small_skb = dev_alloc_skb(dlen + 12); + if (small_skb) { + skb_reserve(small_skb, 12); + ib_dma_sync_single_for_cpu(priv->ca, rx_ring[wr_id].mapping[0], + dlen, DMA_FROM_DEVICE); + skb_copy_from_linear_data(skb, small_skb->data, dlen); + ib_dma_sync_single_for_device(priv->ca, rx_ring[wr_id].mapping[0], + dlen, DMA_FROM_DEVICE); + skb_put(small_skb, dlen); + skb = small_skb; + goto copied; + } + } + frags = PAGE_ALIGN(wc->byte_len - min(wc->byte_len, (unsigned)IPOIB_CM_HEAD_SIZE)) / PAGE_SIZE; @@ -599,6 +617,7 @@ void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) skb_put_frags(skb, IPOIB_CM_HEAD_SIZE, wc->byte_len, newskb); +copied: skb->protocol = ((struct ipoib_header *) skb->data)->proto; skb_reset_mac_header(skb); skb_pull(skb, IPOIB_ENCAP_LEN); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index f217b1edd0ac..bfe1dbf99207 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1302,6 +1302,12 @@ static int __init ipoib_init_module(void) ipoib_max_conn_qp = min(ipoib_max_conn_qp, IPOIB_CM_MAX_CONN_QP); #endif + /* + * When copying small received packets, we only copy from the + * linear data part of the SKB, so we rely on this condition. + */ + BUILD_BUG_ON(IPOIB_CM_COPYBREAK > IPOIB_CM_HEAD_SIZE); + ret = ipoib_register_debugfs(); if (ret) return ret; -- cgit v1.2.3 From 00f7ec36c9324928e4cd23f02e6d8550f30c32ca Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 14 Jul 2008 23:48:45 -0700 Subject: RDMA/core: Add memory management extensions support This patch adds support for the IB "base memory management extension" (BMME) and the equivalent iWARP operations (which the iWARP verbs mandates all devices must implement). The new operations are: - Allocate an ib_mr for use in fast register work requests. - Allocate/free a physical buffer lists for use in fast register work requests. This allows device drivers to allocate this memory as needed for use in posting send requests (eg via dma_alloc_coherent). - New send queue work requests: * send with remote invalidate * fast register memory region * local invalidate memory region * RDMA read with invalidate local memory region (iWARP only) Consumer interface details: - A new device capability flag IB_DEVICE_MEM_MGT_EXTENSIONS is added to indicate device support for these features. - New send work request opcodes IB_WR_FAST_REG_MR, IB_WR_LOCAL_INV, IB_WR_RDMA_READ_WITH_INV are added. - A new consumer API function, ib_alloc_mr() is added to allocate fast register memory regions. - New consumer API functions, ib_alloc_fast_reg_page_list() and ib_free_fast_reg_page_list() are added to allocate and free device-specific memory for fast registration page lists. - A new consumer API function, ib_update_fast_reg_key(), is added to allow the key portion of the R_Key and L_Key of a fast registration MR to be updated. Consumers call this if desired before posting a IB_WR_FAST_REG_MR work request. Consumers can use this as follows: - MR is allocated with ib_alloc_mr(). - Page list memory is allocated with ib_alloc_fast_reg_page_list(). - MR R_Key/L_Key "key" field is updated with ib_update_fast_reg_key(). - MR made VALID and bound to a specific page list via ib_post_send(IB_WR_FAST_REG_MR) - MR made INVALID via ib_post_send(IB_WR_LOCAL_INV), ib_post_send(IB_WR_RDMA_READ_WITH_INV) or an incoming send with invalidate operation. - MR is deallocated with ib_dereg_mr() - page lists dealloced via ib_free_fast_reg_page_list(). Applications can allocate a fast register MR once, and then can repeatedly bind the MR to different physical block lists (PBLs) via posting work requests to a send queue (SQ). For each outstanding MR-to-PBL binding in the SQ pipe, a fast_reg_page_list needs to be allocated (the fast_reg_page_list is owned by the low-level driver from the consumer posting a work request until the request completes). Thus pipelining can be achieved while still allowing device-specific page_list processing. The 32-bit fast register memory key/STag is composed of a 24-bit index and an 8-bit key. The application can change the key each time it fast registers thus allowing more control over the peer's use of the key/STag (ie it can effectively be changed each time the rkey is rebound to a page list). Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/core/uverbs_cmd.c | 2 +- drivers/infiniband/core/verbs.c | 46 ++++++++++++++++++ drivers/infiniband/hw/ehca/ehca_reqs.c | 2 +- drivers/infiniband/hw/ipath/ipath_cq.c | 2 +- drivers/infiniband/hw/ipath/ipath_rc.c | 4 +- drivers/infiniband/hw/ipath/ipath_ruc.c | 4 +- drivers/infiniband/hw/ipath/ipath_uc.c | 8 ++-- drivers/infiniband/hw/ipath/ipath_ud.c | 8 ++-- drivers/infiniband/hw/mlx4/cq.c | 12 ++--- drivers/infiniband/hw/mthca/mthca_cq.c | 4 +- include/rdma/ib_user_verbs.h | 5 +- include/rdma/ib_verbs.h | 83 ++++++++++++++++++++++++++++++++- 12 files changed, 154 insertions(+), 26 deletions(-) diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c index 112b37cd6895..56feab6c251e 100644 --- a/drivers/infiniband/core/uverbs_cmd.c +++ b/drivers/infiniband/core/uverbs_cmd.c @@ -917,7 +917,7 @@ ssize_t ib_uverbs_poll_cq(struct ib_uverbs_file *file, resp->wc[i].opcode = wc[i].opcode; resp->wc[i].vendor_err = wc[i].vendor_err; resp->wc[i].byte_len = wc[i].byte_len; - resp->wc[i].imm_data = (__u32 __force) wc[i].imm_data; + resp->wc[i].ex.imm_data = (__u32 __force) wc[i].ex.imm_data; resp->wc[i].qp_num = wc[i].qp->qp_num; resp->wc[i].src_qp = wc[i].src_qp; resp->wc[i].wc_flags = wc[i].wc_flags; diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index 9f399d3a42b4..e0fbe5975866 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -753,6 +753,52 @@ int ib_dereg_mr(struct ib_mr *mr) } EXPORT_SYMBOL(ib_dereg_mr); +struct ib_mr *ib_alloc_fast_reg_mr(struct ib_pd *pd, int max_page_list_len) +{ + struct ib_mr *mr; + + if (!pd->device->alloc_fast_reg_mr) + return ERR_PTR(-ENOSYS); + + mr = pd->device->alloc_fast_reg_mr(pd, max_page_list_len); + + if (!IS_ERR(mr)) { + mr->device = pd->device; + mr->pd = pd; + mr->uobject = NULL; + atomic_inc(&pd->usecnt); + atomic_set(&mr->usecnt, 0); + } + + return mr; +} +EXPORT_SYMBOL(ib_alloc_fast_reg_mr); + +struct ib_fast_reg_page_list *ib_alloc_fast_reg_page_list(struct ib_device *device, + int max_page_list_len) +{ + struct ib_fast_reg_page_list *page_list; + + if (!device->alloc_fast_reg_page_list) + return ERR_PTR(-ENOSYS); + + page_list = device->alloc_fast_reg_page_list(device, max_page_list_len); + + if (!IS_ERR(page_list)) { + page_list->device = device; + page_list->max_page_list_len = max_page_list_len; + } + + return page_list; +} +EXPORT_SYMBOL(ib_alloc_fast_reg_page_list); + +void ib_free_fast_reg_page_list(struct ib_fast_reg_page_list *page_list) +{ + page_list->device->free_fast_reg_page_list(page_list); +} +EXPORT_SYMBOL(ib_free_fast_reg_page_list); + /* Memory windows */ struct ib_mw *ib_alloc_mw(struct ib_pd *pd) diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index f093b0033daf..b799b2710210 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -681,7 +681,7 @@ poll_cq_one_read_cqe: wc->dlid_path_bits = cqe->dlid; wc->src_qp = cqe->remote_qp_number; wc->wc_flags = cqe->w_completion_flags; - wc->imm_data = cpu_to_be32(cqe->immediate_data); + wc->ex.imm_data = cpu_to_be32(cqe->immediate_data); wc->sl = cqe->service_level; poll_cq_one_exit0: diff --git a/drivers/infiniband/hw/ipath/ipath_cq.c b/drivers/infiniband/hw/ipath/ipath_cq.c index a03bd28d9b48..d385e4168c97 100644 --- a/drivers/infiniband/hw/ipath/ipath_cq.c +++ b/drivers/infiniband/hw/ipath/ipath_cq.c @@ -82,7 +82,7 @@ void ipath_cq_enter(struct ipath_cq *cq, struct ib_wc *entry, int solicited) wc->uqueue[head].opcode = entry->opcode; wc->uqueue[head].vendor_err = entry->vendor_err; wc->uqueue[head].byte_len = entry->byte_len; - wc->uqueue[head].imm_data = (__u32 __force)entry->imm_data; + wc->uqueue[head].ex.imm_data = (__u32 __force) entry->ex.imm_data; wc->uqueue[head].qp_num = entry->qp->qp_num; wc->uqueue[head].src_qp = entry->src_qp; wc->uqueue[head].wc_flags = entry->wc_flags; diff --git a/drivers/infiniband/hw/ipath/ipath_rc.c b/drivers/infiniband/hw/ipath/ipath_rc.c index 108df667d2ee..97710522624d 100644 --- a/drivers/infiniband/hw/ipath/ipath_rc.c +++ b/drivers/infiniband/hw/ipath/ipath_rc.c @@ -1703,11 +1703,11 @@ void ipath_rc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr, case OP(SEND_LAST_WITH_IMMEDIATE): send_last_imm: if (header_in_data) { - wc.imm_data = *(__be32 *) data; + wc.ex.imm_data = *(__be32 *) data; data += sizeof(__be32); } else { /* Immediate data comes after BTH */ - wc.imm_data = ohdr->u.imm_data; + wc.ex.imm_data = ohdr->u.imm_data; } hdrsize += 4; wc.wc_flags = IB_WC_WITH_IMM; diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c index a4b5521567fe..af051f757663 100644 --- a/drivers/infiniband/hw/ipath/ipath_ruc.c +++ b/drivers/infiniband/hw/ipath/ipath_ruc.c @@ -331,7 +331,7 @@ again: switch (wqe->wr.opcode) { case IB_WR_SEND_WITH_IMM: wc.wc_flags = IB_WC_WITH_IMM; - wc.imm_data = wqe->wr.ex.imm_data; + wc.ex.imm_data = wqe->wr.ex.imm_data; /* FALLTHROUGH */ case IB_WR_SEND: if (!ipath_get_rwqe(qp, 0)) @@ -342,7 +342,7 @@ again: if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE))) goto inv_err; wc.wc_flags = IB_WC_WITH_IMM; - wc.imm_data = wqe->wr.ex.imm_data; + wc.ex.imm_data = wqe->wr.ex.imm_data; if (!ipath_get_rwqe(qp, 1)) goto rnr_nak; /* FALLTHROUGH */ diff --git a/drivers/infiniband/hw/ipath/ipath_uc.c b/drivers/infiniband/hw/ipath/ipath_uc.c index 0596ec16fcbd..82cc588b8bf2 100644 --- a/drivers/infiniband/hw/ipath/ipath_uc.c +++ b/drivers/infiniband/hw/ipath/ipath_uc.c @@ -379,11 +379,11 @@ void ipath_uc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr, case OP(SEND_LAST_WITH_IMMEDIATE): send_last_imm: if (header_in_data) { - wc.imm_data = *(__be32 *) data; + wc.ex.imm_data = *(__be32 *) data; data += sizeof(__be32); } else { /* Immediate data comes after BTH */ - wc.imm_data = ohdr->u.imm_data; + wc.ex.imm_data = ohdr->u.imm_data; } hdrsize += 4; wc.wc_flags = IB_WC_WITH_IMM; @@ -483,11 +483,11 @@ void ipath_uc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr, case OP(RDMA_WRITE_LAST_WITH_IMMEDIATE): rdma_last_imm: if (header_in_data) { - wc.imm_data = *(__be32 *) data; + wc.ex.imm_data = *(__be32 *) data; data += sizeof(__be32); } else { /* Immediate data comes after BTH */ - wc.imm_data = ohdr->u.imm_data; + wc.ex.imm_data = ohdr->u.imm_data; } hdrsize += 4; wc.wc_flags = IB_WC_WITH_IMM; diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c index 77ca8ca74e78..36aa242c487c 100644 --- a/drivers/infiniband/hw/ipath/ipath_ud.c +++ b/drivers/infiniband/hw/ipath/ipath_ud.c @@ -96,7 +96,7 @@ static void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_swqe *swqe) if (swqe->wr.opcode == IB_WR_SEND_WITH_IMM) { wc.wc_flags = IB_WC_WITH_IMM; - wc.imm_data = swqe->wr.ex.imm_data; + wc.ex.imm_data = swqe->wr.ex.imm_data; } /* @@ -492,14 +492,14 @@ void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr, if (qp->ibqp.qp_num > 1 && opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) { if (header_in_data) { - wc.imm_data = *(__be32 *) data; + wc.ex.imm_data = *(__be32 *) data; data += sizeof(__be32); } else - wc.imm_data = ohdr->u.ud.imm_data; + wc.ex.imm_data = ohdr->u.ud.imm_data; wc.wc_flags = IB_WC_WITH_IMM; hdrsize += sizeof(u32); } else if (opcode == IB_OPCODE_UD_SEND_ONLY) { - wc.imm_data = 0; + wc.ex.imm_data = 0; wc.wc_flags = 0; } else { dev->n_pkt_drops++; diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index 4521319b1406..299f20832ab6 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -663,18 +663,18 @@ repoll: switch (cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) { case MLX4_RECV_OPCODE_RDMA_WRITE_IMM: - wc->opcode = IB_WC_RECV_RDMA_WITH_IMM; - wc->wc_flags = IB_WC_WITH_IMM; - wc->imm_data = cqe->immed_rss_invalid; + wc->opcode = IB_WC_RECV_RDMA_WITH_IMM; + wc->wc_flags = IB_WC_WITH_IMM; + wc->ex.imm_data = cqe->immed_rss_invalid; break; case MLX4_RECV_OPCODE_SEND: wc->opcode = IB_WC_RECV; wc->wc_flags = 0; break; case MLX4_RECV_OPCODE_SEND_IMM: - wc->opcode = IB_WC_RECV; - wc->wc_flags = IB_WC_WITH_IMM; - wc->imm_data = cqe->immed_rss_invalid; + wc->opcode = IB_WC_RECV; + wc->wc_flags = IB_WC_WITH_IMM; + wc->ex.imm_data = cqe->immed_rss_invalid; break; } diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c index f788fce71ac7..d9f4735c2b37 100644 --- a/drivers/infiniband/hw/mthca/mthca_cq.c +++ b/drivers/infiniband/hw/mthca/mthca_cq.c @@ -620,13 +620,13 @@ static inline int mthca_poll_one(struct mthca_dev *dev, case IB_OPCODE_SEND_LAST_WITH_IMMEDIATE: case IB_OPCODE_SEND_ONLY_WITH_IMMEDIATE: entry->wc_flags = IB_WC_WITH_IMM; - entry->imm_data = cqe->imm_etype_pkey_eec; + entry->ex.imm_data = cqe->imm_etype_pkey_eec; entry->opcode = IB_WC_RECV; break; case IB_OPCODE_RDMA_WRITE_LAST_WITH_IMMEDIATE: case IB_OPCODE_RDMA_WRITE_ONLY_WITH_IMMEDIATE: entry->wc_flags = IB_WC_WITH_IMM; - entry->imm_data = cqe->imm_etype_pkey_eec; + entry->ex.imm_data = cqe->imm_etype_pkey_eec; entry->opcode = IB_WC_RECV_RDMA_WITH_IMM; break; default: diff --git a/include/rdma/ib_user_verbs.h b/include/rdma/ib_user_verbs.h index 885254f20bb3..a17f77106149 100644 --- a/include/rdma/ib_user_verbs.h +++ b/include/rdma/ib_user_verbs.h @@ -289,7 +289,10 @@ struct ib_uverbs_wc { __u32 opcode; __u32 vendor_err; __u32 byte_len; - __u32 imm_data; + union { + __u32 imm_data; + __u32 invalidate_rkey; + } ex; __u32 qp_num; __u32 src_qp; __u32 wc_flags; diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 5f5621bf70bd..74c24b908908 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -103,6 +103,7 @@ enum ib_device_cap_flags { */ IB_DEVICE_UD_IP_CSUM = (1<<18), IB_DEVICE_UD_TSO = (1<<19), + IB_DEVICE_MEM_MGT_EXTENSIONS = (1<<21), }; enum ib_atomic_cap { @@ -148,6 +149,7 @@ struct ib_device_attr { int max_srq; int max_srq_wr; int max_srq_sge; + unsigned int max_fast_reg_page_list_len; u16 max_pkeys; u8 local_ca_ack_delay; }; @@ -411,6 +413,8 @@ enum ib_wc_opcode { IB_WC_FETCH_ADD, IB_WC_BIND_MW, IB_WC_LSO, + IB_WC_LOCAL_INV, + IB_WC_FAST_REG_MR, /* * Set value of IB_WC_RECV so consumers can test if a completion is a * receive by testing (opcode & IB_WC_RECV). @@ -421,7 +425,8 @@ enum ib_wc_opcode { enum ib_wc_flags { IB_WC_GRH = 1, - IB_WC_WITH_IMM = (1<<1) + IB_WC_WITH_IMM = (1<<1), + IB_WC_WITH_INVALIDATE = (1<<2), }; struct ib_wc { @@ -431,7 +436,10 @@ struct ib_wc { u32 vendor_err; u32 byte_len; struct ib_qp *qp; - __be32 imm_data; + union { + __be32 imm_data; + u32 invalidate_rkey; + } ex; u32 src_qp; int wc_flags; u16 pkey_index; @@ -625,6 +633,9 @@ enum ib_wr_opcode { IB_WR_ATOMIC_FETCH_AND_ADD, IB_WR_LSO, IB_WR_SEND_WITH_INV, + IB_WR_RDMA_READ_WITH_INV, + IB_WR_LOCAL_INV, + IB_WR_FAST_REG_MR, }; enum ib_send_flags { @@ -641,6 +652,12 @@ struct ib_sge { u32 lkey; }; +struct ib_fast_reg_page_list { + struct ib_device *device; + u64 *page_list; + unsigned int max_page_list_len; +}; + struct ib_send_wr { struct ib_send_wr *next; u64 wr_id; @@ -673,6 +690,15 @@ struct ib_send_wr { u16 pkey_index; /* valid for GSI only */ u8 port_num; /* valid for DR SMPs on switch only */ } ud; + struct { + u64 iova_start; + struct ib_fast_reg_page_list *page_list; + unsigned int page_shift; + unsigned int page_list_len; + u32 length; + int access_flags; + u32 rkey; + } fast_reg; } wr; }; @@ -1011,6 +1037,11 @@ struct ib_device { int (*query_mr)(struct ib_mr *mr, struct ib_mr_attr *mr_attr); int (*dereg_mr)(struct ib_mr *mr); + struct ib_mr * (*alloc_fast_reg_mr)(struct ib_pd *pd, + int max_page_list_len); + struct ib_fast_reg_page_list * (*alloc_fast_reg_page_list)(struct ib_device *device, + int page_list_len); + void (*free_fast_reg_page_list)(struct ib_fast_reg_page_list *page_list); int (*rereg_phys_mr)(struct ib_mr *mr, int mr_rereg_mask, struct ib_pd *pd, @@ -1804,6 +1835,54 @@ int ib_query_mr(struct ib_mr *mr, struct ib_mr_attr *mr_attr); */ int ib_dereg_mr(struct ib_mr *mr); +/** + * ib_alloc_fast_reg_mr - Allocates memory region usable with the + * IB_WR_FAST_REG_MR send work request. + * @pd: The protection domain associated with the region. + * @max_page_list_len: requested max physical buffer list length to be + * used with fast register work requests for this MR. + */ +struct ib_mr *ib_alloc_fast_reg_mr(struct ib_pd *pd, int max_page_list_len); + +/** + * ib_alloc_fast_reg_page_list - Allocates a page list array + * @device - ib device pointer. + * @page_list_len - size of the page list array to be allocated. + * + * This allocates and returns a struct ib_fast_reg_page_list * and a + * page_list array that is at least page_list_len in size. The actual + * size is returned in max_page_list_len. The caller is responsible + * for initializing the contents of the page_list array before posting + * a send work request with the IB_WC_FAST_REG_MR opcode. + * + * The page_list array entries must be translated using one of the + * ib_dma_*() functions just like the addresses passed to + * ib_map_phys_fmr(). Once the ib_post_send() is issued, the struct + * ib_fast_reg_page_list must not be modified by the caller until the + * IB_WC_FAST_REG_MR work request completes. + */ +struct ib_fast_reg_page_list *ib_alloc_fast_reg_page_list( + struct ib_device *device, int page_list_len); + +/** + * ib_free_fast_reg_page_list - Deallocates a previously allocated + * page list array. + * @page_list - struct ib_fast_reg_page_list pointer to be deallocated. + */ +void ib_free_fast_reg_page_list(struct ib_fast_reg_page_list *page_list); + +/** + * ib_update_fast_reg_key - updates the key portion of the fast_reg MR + * R_Key and L_Key. + * @mr - struct ib_mr pointer to be updated. + * @newkey - new key to be used. + */ +static inline void ib_update_fast_reg_key(struct ib_mr *mr, u8 newkey) +{ + mr->lkey = (mr->lkey & 0xffffff00) | newkey; + mr->rkey = (mr->rkey & 0xffffff00) | newkey; +} + /** * ib_alloc_mw - Allocates a memory window. * @pd: The protection domain associated with the memory window. -- cgit v1.2.3 From e7e55829999deaab3f43e201a087731c02c54cf9 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 14 Jul 2008 23:48:45 -0700 Subject: RDMA/cxgb3: MEM_MGT_EXTENSIONS support - set IB_DEVICE_MEM_MGT_EXTENSIONS capability bit if fw supports it. - set max_fast_reg_page_list_len device attribute. - add iwch_alloc_fast_reg_mr function. - add iwch_alloc_fastreg_pbl - add iwch_free_fastreg_pbl - adjust the WQ depth for kernel mode work queues to account for fastreg possibly taking 2 WR slots. - add fastreg_mr work request support. - add local_inv work request support. - add send_with_inv and send_with_se_inv work request support. - removed useless duplicate enums/defines for TPT/MW/MR stuff. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/cxio_hal.c | 15 ++- drivers/infiniband/hw/cxgb3/cxio_hal.h | 1 + drivers/infiniband/hw/cxgb3/cxio_wr.h | 90 ++++++++++++++---- drivers/infiniband/hw/cxgb3/iwch_cq.c | 15 ++- drivers/infiniband/hw/cxgb3/iwch_provider.c | 104 +++++++++++++++++++- drivers/infiniband/hw/cxgb3/iwch_provider.h | 8 -- drivers/infiniband/hw/cxgb3/iwch_qp.c | 142 +++++++++++++++++++--------- 7 files changed, 293 insertions(+), 82 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c index 3f441fc57c17..340e4181c761 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.c +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -145,7 +145,9 @@ static int cxio_hal_clear_qp_ctx(struct cxio_rdev *rdev_p, u32 qpid) } wqe = (struct t3_modify_qp_wr *) skb_put(skb, sizeof(*wqe)); memset(wqe, 0, sizeof(*wqe)); - build_fw_riwrh((struct fw_riwrh *) wqe, T3_WR_QP_MOD, 3, 0, qpid, 7); + build_fw_riwrh((struct fw_riwrh *) wqe, T3_WR_QP_MOD, + T3_COMPLETION_FLAG | T3_NOTIFY_FLAG, 0, qpid, 7, + T3_SOPEOP); wqe->flags = cpu_to_be32(MODQP_WRITE_EC); sge_cmd = qpid << 8 | 3; wqe->sge_cmd = cpu_to_be64(sge_cmd); @@ -558,7 +560,7 @@ static int cxio_hal_init_ctrl_qp(struct cxio_rdev *rdev_p) wqe = (struct t3_modify_qp_wr *) skb_put(skb, sizeof(*wqe)); memset(wqe, 0, sizeof(*wqe)); build_fw_riwrh((struct fw_riwrh *) wqe, T3_WR_QP_MOD, 0, 0, - T3_CTL_QP_TID, 7); + T3_CTL_QP_TID, 7, T3_SOPEOP); wqe->flags = cpu_to_be32(MODQP_WRITE_EC); sge_cmd = (3ULL << 56) | FW_RI_SGEEC_START << 8 | 3; wqe->sge_cmd = cpu_to_be64(sge_cmd); @@ -674,7 +676,7 @@ static int cxio_hal_ctrl_qp_write_mem(struct cxio_rdev *rdev_p, u32 addr, build_fw_riwrh((struct fw_riwrh *) wqe, T3_WR_BP, flag, Q_GENBIT(rdev_p->ctrl_qp.wptr, T3_CTRL_QP_SIZE_LOG2), T3_CTRL_QP_ID, - wr_len); + wr_len, T3_SOPEOP); if (flag == T3_COMPLETION_FLAG) ring_doorbell(rdev_p->ctrl_qp.doorbell, T3_CTRL_QP_ID); len -= 96; @@ -816,6 +818,13 @@ int cxio_deallocate_window(struct cxio_rdev *rdev_p, u32 stag) 0, 0); } +int cxio_allocate_stag(struct cxio_rdev *rdev_p, u32 *stag, u32 pdid, u32 pbl_size, u32 pbl_addr) +{ + *stag = T3_STAG_UNSET; + return __cxio_tpt_op(rdev_p, 0, stag, 0, pdid, TPT_NON_SHARED_MR, + 0, 0, 0ULL, 0, 0, pbl_size, pbl_addr); +} + int cxio_rdma_init(struct cxio_rdev *rdev_p, struct t3_rdma_init_attr *attr) { struct t3_rdma_init_wr *wqe; diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.h b/drivers/infiniband/hw/cxgb3/cxio_hal.h index 6e128f6bab05..25a880664e6b 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.h +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.h @@ -165,6 +165,7 @@ int cxio_reregister_phys_mem(struct cxio_rdev *rdev, u32 * stag, u32 pdid, int cxio_dereg_mem(struct cxio_rdev *rdev, u32 stag, u32 pbl_size, u32 pbl_addr); int cxio_allocate_window(struct cxio_rdev *rdev, u32 * stag, u32 pdid); +int cxio_allocate_stag(struct cxio_rdev *rdev, u32 *stag, u32 pdid, u32 pbl_size, u32 pbl_addr); int cxio_deallocate_window(struct cxio_rdev *rdev, u32 stag); int cxio_rdma_init(struct cxio_rdev *rdev, struct t3_rdma_init_attr *attr); void cxio_register_ev_cb(cxio_hal_ev_callback_func_t ev_cb); diff --git a/drivers/infiniband/hw/cxgb3/cxio_wr.h b/drivers/infiniband/hw/cxgb3/cxio_wr.h index f1a25a821a45..de760e9f1cc6 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_wr.h +++ b/drivers/infiniband/hw/cxgb3/cxio_wr.h @@ -72,7 +72,8 @@ enum t3_wr_opcode { T3_WR_BIND = FW_WROPCODE_RI_BIND_MW, T3_WR_RCV = FW_WROPCODE_RI_RECEIVE, T3_WR_INIT = FW_WROPCODE_RI_RDMA_INIT, - T3_WR_QP_MOD = FW_WROPCODE_RI_MODIFY_QP + T3_WR_QP_MOD = FW_WROPCODE_RI_MODIFY_QP, + T3_WR_FASTREG = FW_WROPCODE_RI_FASTREGISTER_MR } __attribute__ ((packed)); enum t3_rdma_opcode { @@ -89,7 +90,8 @@ enum t3_rdma_opcode { T3_FAST_REGISTER, T3_LOCAL_INV, T3_QP_MOD, - T3_BYPASS + T3_BYPASS, + T3_RDMA_READ_REQ_WITH_INV, } __attribute__ ((packed)); static inline enum t3_rdma_opcode wr2opcode(enum t3_wr_opcode wrop) @@ -103,6 +105,7 @@ static inline enum t3_rdma_opcode wr2opcode(enum t3_wr_opcode wrop) case T3_WR_BIND: return T3_BIND_MW; case T3_WR_INIT: return T3_RDMA_INIT; case T3_WR_QP_MOD: return T3_QP_MOD; + case T3_WR_FASTREG: return T3_FAST_REGISTER; default: break; } return -1; @@ -170,11 +173,54 @@ struct t3_send_wr { struct t3_sge sgl[T3_MAX_SGE]; /* 4+ */ }; +#define T3_MAX_FASTREG_DEPTH 24 +#define T3_MAX_FASTREG_FRAG 10 + +struct t3_fastreg_wr { + struct fw_riwrh wrh; /* 0 */ + union t3_wrid wrid; /* 1 */ + __be32 stag; /* 2 */ + __be32 len; + __be32 va_base_hi; /* 3 */ + __be32 va_base_lo_fbo; + __be32 page_type_perms; /* 4 */ + __be32 reserved1; + __be64 pbl_addrs[0]; /* 5+ */ +}; + +/* + * If a fastreg wr spans multiple wqes, then the 2nd fragment look like this. + */ +struct t3_pbl_frag { + struct fw_riwrh wrh; /* 0 */ + __be64 pbl_addrs[14]; /* 1..14 */ +}; + +#define S_FR_PAGE_COUNT 24 +#define M_FR_PAGE_COUNT 0xff +#define V_FR_PAGE_COUNT(x) ((x) << S_FR_PAGE_COUNT) +#define G_FR_PAGE_COUNT(x) ((((x) >> S_FR_PAGE_COUNT)) & M_FR_PAGE_COUNT) + +#define S_FR_PAGE_SIZE 16 +#define M_FR_PAGE_SIZE 0x1f +#define V_FR_PAGE_SIZE(x) ((x) << S_FR_PAGE_SIZE) +#define G_FR_PAGE_SIZE(x) ((((x) >> S_FR_PAGE_SIZE)) & M_FR_PAGE_SIZE) + +#define S_FR_TYPE 8 +#define M_FR_TYPE 0x1 +#define V_FR_TYPE(x) ((x) << S_FR_TYPE) +#define G_FR_TYPE(x) ((((x) >> S_FR_TYPE)) & M_FR_TYPE) + +#define S_FR_PERMS 0 +#define M_FR_PERMS 0xff +#define V_FR_PERMS(x) ((x) << S_FR_PERMS) +#define G_FR_PERMS(x) ((((x) >> S_FR_PERMS)) & M_FR_PERMS) + struct t3_local_inv_wr { struct fw_riwrh wrh; /* 0 */ union t3_wrid wrid; /* 1 */ __be32 stag; /* 2 */ - __be32 reserved3; + __be32 reserved; }; struct t3_rdma_write_wr { @@ -193,7 +239,8 @@ struct t3_rdma_read_wr { struct fw_riwrh wrh; /* 0 */ union t3_wrid wrid; /* 1 */ u8 rdmaop; /* 2 */ - u8 reserved[3]; + u8 local_inv; + u8 reserved[2]; __be32 rem_stag; __be64 rem_to; /* 3 */ __be32 local_stag; /* 4 */ @@ -201,18 +248,6 @@ struct t3_rdma_read_wr { __be64 local_to; /* 5 */ }; -enum t3_addr_type { - T3_VA_BASED_TO = 0x0, - T3_ZERO_BASED_TO = 0x1 -} __attribute__ ((packed)); - -enum t3_mem_perms { - T3_MEM_ACCESS_LOCAL_READ = 0x1, - T3_MEM_ACCESS_LOCAL_WRITE = 0x2, - T3_MEM_ACCESS_REM_READ = 0x4, - T3_MEM_ACCESS_REM_WRITE = 0x8 -} __attribute__ ((packed)); - struct t3_bind_mw_wr { struct fw_riwrh wrh; /* 0 */ union t3_wrid wrid; /* 1 */ @@ -336,6 +371,11 @@ struct t3_genbit { __be64 genbit; }; +struct t3_wq_in_err { + u64 flit[13]; + u64 err; +}; + enum rdma_init_wr_flags { MPA_INITIATOR = (1<<0), PRIV_QP = (1<<1), @@ -346,13 +386,16 @@ union t3_wr { struct t3_rdma_write_wr write; struct t3_rdma_read_wr read; struct t3_receive_wr recv; + struct t3_fastreg_wr fastreg; + struct t3_pbl_frag pbl_frag; struct t3_local_inv_wr local_inv; struct t3_bind_mw_wr bind; struct t3_bypass_wr bypass; struct t3_rdma_init_wr init; struct t3_modify_qp_wr qp_mod; struct t3_genbit genbit; - u64 flit[16]; + struct t3_wq_in_err wq_in_err; + __be64 flit[16]; }; #define T3_SQ_CQE_FLIT 13 @@ -366,12 +409,18 @@ static inline enum t3_wr_opcode fw_riwrh_opcode(struct fw_riwrh *wqe) return G_FW_RIWR_OP(be32_to_cpu(wqe->op_seop_flags)); } +enum t3_wr_hdr_bits { + T3_EOP = 1, + T3_SOP = 2, + T3_SOPEOP = T3_EOP|T3_SOP, +}; + static inline void build_fw_riwrh(struct fw_riwrh *wqe, enum t3_wr_opcode op, enum t3_wr_flags flags, u8 genbit, u32 tid, - u8 len) + u8 len, u8 sopeop) { wqe->op_seop_flags = cpu_to_be32(V_FW_RIWR_OP(op) | - V_FW_RIWR_SOPEOP(M_FW_RIWR_SOPEOP) | + V_FW_RIWR_SOPEOP(sopeop) | V_FW_RIWR_FLAGS(flags)); wmb(); wqe->gen_tid_len = cpu_to_be32(V_FW_RIWR_GEN(genbit) | @@ -404,6 +453,7 @@ enum tpt_addr_type { }; enum tpt_mem_perm { + TPT_MW_BIND = 0x10, TPT_LOCAL_READ = 0x8, TPT_LOCAL_WRITE = 0x4, TPT_REMOTE_READ = 0x2, @@ -659,7 +709,7 @@ struct t3_cq { static inline void cxio_set_wq_in_error(struct t3_wq *wq) { - wq->queue->flit[13] = 1; + wq->queue->wq_in_err.err = 1; } static inline struct t3_cqe *cxio_next_hw_cqe(struct t3_cq *cq) diff --git a/drivers/infiniband/hw/cxgb3/iwch_cq.c b/drivers/infiniband/hw/cxgb3/iwch_cq.c index 4ee8ccd0a9e5..cf5474ae68ff 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cq.c +++ b/drivers/infiniband/hw/cxgb3/iwch_cq.c @@ -81,6 +81,7 @@ static int iwch_poll_cq_one(struct iwch_dev *rhp, struct iwch_cq *chp, wc->wr_id = cookie; wc->qp = &qhp->ibqp; wc->vendor_err = CQE_STATUS(cqe); + wc->wc_flags = 0; PDBG("%s qpid 0x%x type %d opcode %d status 0x%x wrid hi 0x%x " "lo 0x%x cookie 0x%llx\n", __func__, @@ -94,6 +95,11 @@ static int iwch_poll_cq_one(struct iwch_dev *rhp, struct iwch_cq *chp, else wc->byte_len = 0; wc->opcode = IB_WC_RECV; + if (CQE_OPCODE(cqe) == T3_SEND_WITH_INV || + CQE_OPCODE(cqe) == T3_SEND_WITH_SE_INV) { + wc->ex.invalidate_rkey = CQE_WRID_STAG(cqe); + wc->wc_flags |= IB_WC_WITH_INVALIDATE; + } } else { switch (CQE_OPCODE(cqe)) { case T3_RDMA_WRITE: @@ -105,17 +111,20 @@ static int iwch_poll_cq_one(struct iwch_dev *rhp, struct iwch_cq *chp, break; case T3_SEND: case T3_SEND_WITH_SE: + case T3_SEND_WITH_INV: + case T3_SEND_WITH_SE_INV: wc->opcode = IB_WC_SEND; break; case T3_BIND_MW: wc->opcode = IB_WC_BIND_MW; break; - /* these aren't supported yet */ - case T3_SEND_WITH_INV: - case T3_SEND_WITH_SE_INV: case T3_LOCAL_INV: + wc->opcode = IB_WC_LOCAL_INV; + break; case T3_FAST_REGISTER: + wc->opcode = IB_WC_FAST_REG_MR; + break; default: printk(KERN_ERR MOD "Unexpected opcode %d " "in the CQE received for QPID=0x%0x\n", diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index 95f82cfb6c54..5d504f3ed68b 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -768,6 +768,68 @@ static int iwch_dealloc_mw(struct ib_mw *mw) return 0; } +static struct ib_mr *iwch_alloc_fast_reg_mr(struct ib_pd *pd, int pbl_depth) +{ + struct iwch_dev *rhp; + struct iwch_pd *php; + struct iwch_mr *mhp; + u32 mmid; + u32 stag = 0; + int ret; + + php = to_iwch_pd(pd); + rhp = php->rhp; + mhp = kzalloc(sizeof(*mhp), GFP_KERNEL); + if (!mhp) + return ERR_PTR(-ENOMEM); + + mhp->rhp = rhp; + ret = iwch_alloc_pbl(mhp, pbl_depth); + if (ret) { + kfree(mhp); + return ERR_PTR(ret); + } + mhp->attr.pbl_size = pbl_depth; + ret = cxio_allocate_stag(&rhp->rdev, &stag, php->pdid, + mhp->attr.pbl_size, mhp->attr.pbl_addr); + if (ret) { + iwch_free_pbl(mhp); + kfree(mhp); + return ERR_PTR(ret); + } + mhp->attr.pdid = php->pdid; + mhp->attr.type = TPT_NON_SHARED_MR; + mhp->attr.stag = stag; + mhp->attr.state = 1; + mmid = (stag) >> 8; + mhp->ibmr.rkey = mhp->ibmr.lkey = stag; + insert_handle(rhp, &rhp->mmidr, mhp, mmid); + PDBG("%s mmid 0x%x mhp %p stag 0x%x\n", __func__, mmid, mhp, stag); + return &(mhp->ibmr); +} + +static struct ib_fast_reg_page_list *iwch_alloc_fastreg_pbl( + struct ib_device *device, + int page_list_len) +{ + struct ib_fast_reg_page_list *page_list; + + page_list = kmalloc(sizeof *page_list + page_list_len * sizeof(u64), + GFP_KERNEL); + if (!page_list) + return ERR_PTR(-ENOMEM); + + page_list->page_list = (u64 *)(page_list + 1); + page_list->max_page_list_len = page_list_len; + + return page_list; +} + +static void iwch_free_fastreg_pbl(struct ib_fast_reg_page_list *page_list) +{ + kfree(page_list); +} + static int iwch_destroy_qp(struct ib_qp *ib_qp) { struct iwch_dev *rhp; @@ -843,6 +905,15 @@ static struct ib_qp *iwch_create_qp(struct ib_pd *pd, */ sqsize = roundup_pow_of_two(attrs->cap.max_send_wr); wqsize = roundup_pow_of_two(rqsize + sqsize); + + /* + * Kernel users need more wq space for fastreg WRs which can take + * 2 WR fragments. + */ + ucontext = pd->uobject ? to_iwch_ucontext(pd->uobject->context) : NULL; + if (!ucontext && wqsize < (rqsize + (2 * sqsize))) + wqsize = roundup_pow_of_two(rqsize + + roundup_pow_of_two(attrs->cap.max_send_wr * 2)); PDBG("%s wqsize %d sqsize %d rqsize %d\n", __func__, wqsize, sqsize, rqsize); qhp = kzalloc(sizeof(*qhp), GFP_KERNEL); @@ -851,7 +922,6 @@ static struct ib_qp *iwch_create_qp(struct ib_pd *pd, qhp->wq.size_log2 = ilog2(wqsize); qhp->wq.rq_size_log2 = ilog2(rqsize); qhp->wq.sq_size_log2 = ilog2(sqsize); - ucontext = pd->uobject ? to_iwch_ucontext(pd->uobject->context) : NULL; if (cxio_create_qp(&rhp->rdev, !udata, &qhp->wq, ucontext ? &ucontext->uctx : &rhp->rdev.uctx)) { kfree(qhp); @@ -1048,6 +1118,7 @@ static int iwch_query_device(struct ib_device *ibdev, props->max_mr = dev->attr.max_mem_regs; props->max_pd = dev->attr.max_pds; props->local_ca_ack_delay = 0; + props->max_fast_reg_page_list_len = T3_MAX_FASTREG_DEPTH; return 0; } @@ -1088,6 +1159,28 @@ static ssize_t show_rev(struct device *dev, struct device_attribute *attr, return sprintf(buf, "%d\n", iwch_dev->rdev.t3cdev_p->type); } +static int fw_supports_fastreg(struct iwch_dev *iwch_dev) +{ + struct ethtool_drvinfo info; + struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; + char *cp, *next; + unsigned fw_maj, fw_min; + + rtnl_lock(); + lldev->ethtool_ops->get_drvinfo(lldev, &info); + rtnl_unlock(); + + next = info.fw_version+1; + cp = strsep(&next, "."); + sscanf(cp, "%i", &fw_maj); + cp = strsep(&next, "."); + sscanf(cp, "%i", &fw_min); + + PDBG("%s maj %u min %u\n", __func__, fw_maj, fw_min); + + return fw_maj > 6 || (fw_maj == 6 && fw_min > 0); +} + static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, char *buf) { struct iwch_dev *iwch_dev = container_of(dev, struct iwch_dev, @@ -1149,8 +1242,10 @@ int iwch_register_device(struct iwch_dev *dev) memset(&dev->ibdev.node_guid, 0, sizeof(dev->ibdev.node_guid)); memcpy(&dev->ibdev.node_guid, dev->rdev.t3cdev_p->lldev->dev_addr, 6); dev->ibdev.owner = THIS_MODULE; - dev->device_cap_flags = - (IB_DEVICE_ZERO_STAG | IB_DEVICE_MEM_WINDOW); + dev->device_cap_flags = IB_DEVICE_ZERO_STAG | + IB_DEVICE_MEM_WINDOW; + if (fw_supports_fastreg(dev)) + dev->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS; dev->ibdev.uverbs_cmd_mask = (1ull << IB_USER_VERBS_CMD_GET_CONTEXT) | @@ -1202,6 +1297,9 @@ int iwch_register_device(struct iwch_dev *dev) dev->ibdev.alloc_mw = iwch_alloc_mw; dev->ibdev.bind_mw = iwch_bind_mw; dev->ibdev.dealloc_mw = iwch_dealloc_mw; + dev->ibdev.alloc_fast_reg_mr = iwch_alloc_fast_reg_mr; + dev->ibdev.alloc_fast_reg_page_list = iwch_alloc_fastreg_pbl; + dev->ibdev.free_fast_reg_page_list = iwch_free_fastreg_pbl; dev->ibdev.attach_mcast = iwch_multicast_attach; dev->ibdev.detach_mcast = iwch_multicast_detach; diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.h b/drivers/infiniband/hw/cxgb3/iwch_provider.h index 836163fc5429..f5ceca05c435 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.h +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.h @@ -296,14 +296,6 @@ static inline u32 iwch_ib_to_tpt_access(int acc) TPT_LOCAL_READ; } -static inline u32 iwch_ib_to_mwbind_access(int acc) -{ - return (acc & IB_ACCESS_REMOTE_WRITE ? T3_MEM_ACCESS_REM_WRITE : 0) | - (acc & IB_ACCESS_REMOTE_READ ? T3_MEM_ACCESS_REM_READ : 0) | - (acc & IB_ACCESS_LOCAL_WRITE ? T3_MEM_ACCESS_LOCAL_WRITE : 0) | - T3_MEM_ACCESS_LOCAL_READ; -} - enum iwch_mmid_state { IWCH_STAG_STATE_VALID, IWCH_STAG_STATE_INVALID diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 992613799228..3b44300a3036 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -44,54 +44,39 @@ static int iwch_build_rdma_send(union t3_wr *wqe, struct ib_send_wr *wr, switch (wr->opcode) { case IB_WR_SEND: - case IB_WR_SEND_WITH_IMM: if (wr->send_flags & IB_SEND_SOLICITED) wqe->send.rdmaop = T3_SEND_WITH_SE; else wqe->send.rdmaop = T3_SEND; wqe->send.rem_stag = 0; break; -#if 0 /* Not currently supported */ - case TYPE_SEND_INVALIDATE: - case TYPE_SEND_INVALIDATE_IMMEDIATE: - wqe->send.rdmaop = T3_SEND_WITH_INV; - wqe->send.rem_stag = cpu_to_be32(wr->wr.rdma.rkey); - break; - case TYPE_SEND_SE_INVALIDATE: - wqe->send.rdmaop = T3_SEND_WITH_SE_INV; - wqe->send.rem_stag = cpu_to_be32(wr->wr.rdma.rkey); + case IB_WR_SEND_WITH_INV: + if (wr->send_flags & IB_SEND_SOLICITED) + wqe->send.rdmaop = T3_SEND_WITH_SE_INV; + else + wqe->send.rdmaop = T3_SEND_WITH_INV; + wqe->send.rem_stag = cpu_to_be32(wr->ex.invalidate_rkey); break; -#endif default: - break; + return -EINVAL; } if (wr->num_sge > T3_MAX_SGE) return -EINVAL; wqe->send.reserved[0] = 0; wqe->send.reserved[1] = 0; wqe->send.reserved[2] = 0; - if (wr->opcode == IB_WR_SEND_WITH_IMM) { - plen = 4; - wqe->send.sgl[0].stag = wr->ex.imm_data; - wqe->send.sgl[0].len = __constant_cpu_to_be32(0); - wqe->send.num_sgle = __constant_cpu_to_be32(0); - *flit_cnt = 5; - } else { - plen = 0; - for (i = 0; i < wr->num_sge; i++) { - if ((plen + wr->sg_list[i].length) < plen) { - return -EMSGSIZE; - } - plen += wr->sg_list[i].length; - wqe->send.sgl[i].stag = - cpu_to_be32(wr->sg_list[i].lkey); - wqe->send.sgl[i].len = - cpu_to_be32(wr->sg_list[i].length); - wqe->send.sgl[i].to = cpu_to_be64(wr->sg_list[i].addr); - } - wqe->send.num_sgle = cpu_to_be32(wr->num_sge); - *flit_cnt = 4 + ((wr->num_sge) << 1); + plen = 0; + for (i = 0; i < wr->num_sge; i++) { + if ((plen + wr->sg_list[i].length) < plen) + return -EMSGSIZE; + + plen += wr->sg_list[i].length; + wqe->send.sgl[i].stag = cpu_to_be32(wr->sg_list[i].lkey); + wqe->send.sgl[i].len = cpu_to_be32(wr->sg_list[i].length); + wqe->send.sgl[i].to = cpu_to_be64(wr->sg_list[i].addr); } + wqe->send.num_sgle = cpu_to_be32(wr->num_sge); + *flit_cnt = 4 + ((wr->num_sge) << 1); wqe->send.plen = cpu_to_be32(plen); return 0; } @@ -143,9 +128,12 @@ static int iwch_build_rdma_read(union t3_wr *wqe, struct ib_send_wr *wr, if (wr->num_sge > 1) return -EINVAL; wqe->read.rdmaop = T3_READ_REQ; + if (wr->opcode == IB_WR_RDMA_READ_WITH_INV) + wqe->read.local_inv = 1; + else + wqe->read.local_inv = 0; wqe->read.reserved[0] = 0; wqe->read.reserved[1] = 0; - wqe->read.reserved[2] = 0; wqe->read.rem_stag = cpu_to_be32(wr->wr.rdma.rkey); wqe->read.rem_to = cpu_to_be64(wr->wr.rdma.remote_addr); wqe->read.local_stag = cpu_to_be32(wr->sg_list[0].lkey); @@ -155,6 +143,57 @@ static int iwch_build_rdma_read(union t3_wr *wqe, struct ib_send_wr *wr, return 0; } +static int iwch_build_fastreg(union t3_wr *wqe, struct ib_send_wr *wr, + u8 *flit_cnt, int *wr_cnt, struct t3_wq *wq) +{ + int i; + __be64 *p; + + if (wr->wr.fast_reg.page_list_len > T3_MAX_FASTREG_DEPTH) + return -EINVAL; + *wr_cnt = 1; + wqe->fastreg.stag = cpu_to_be32(wr->wr.fast_reg.rkey); + wqe->fastreg.len = cpu_to_be32(wr->wr.fast_reg.length); + wqe->fastreg.va_base_hi = cpu_to_be32(wr->wr.fast_reg.iova_start >> 32); + wqe->fastreg.va_base_lo_fbo = + cpu_to_be32(wr->wr.fast_reg.iova_start & 0xffffffff); + wqe->fastreg.page_type_perms = cpu_to_be32( + V_FR_PAGE_COUNT(wr->wr.fast_reg.page_list_len) | + V_FR_PAGE_SIZE(wr->wr.fast_reg.page_shift-12) | + V_FR_TYPE(TPT_VATO) | + V_FR_PERMS(iwch_ib_to_tpt_access(wr->wr.fast_reg.access_flags))); + p = &wqe->fastreg.pbl_addrs[0]; + for (i = 0; i < wr->wr.fast_reg.page_list_len; i++, p++) { + + /* If we need a 2nd WR, then set it up */ + if (i == T3_MAX_FASTREG_FRAG) { + *wr_cnt = 2; + wqe = (union t3_wr *)(wq->queue + + Q_PTR2IDX((wq->wptr+1), wq->size_log2)); + build_fw_riwrh((void *)wqe, T3_WR_FASTREG, 0, + Q_GENBIT(wq->wptr + 1, wq->size_log2), + 0, 1 + wr->wr.fast_reg.page_list_len - T3_MAX_FASTREG_FRAG, + T3_EOP); + + p = &wqe->pbl_frag.pbl_addrs[0]; + } + *p = cpu_to_be64((u64)wr->wr.fast_reg.page_list->page_list[i]); + } + *flit_cnt = 5 + wr->wr.fast_reg.page_list_len; + if (*flit_cnt > 15) + *flit_cnt = 15; + return 0; +} + +static int iwch_build_inv_stag(union t3_wr *wqe, struct ib_send_wr *wr, + u8 *flit_cnt) +{ + wqe->local_inv.stag = cpu_to_be32(wr->ex.invalidate_rkey); + wqe->local_inv.reserved = 0; + *flit_cnt = sizeof(struct t3_local_inv_wr) >> 3; + return 0; +} + /* * TBD: this is going to be moved to firmware. Missing pdid/qpid check for now. */ @@ -238,6 +277,7 @@ int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, u32 num_wrs; unsigned long flag; struct t3_swsq *sqp; + int wr_cnt = 1; qhp = to_iwch_qp(ibqp); spin_lock_irqsave(&qhp->lock, flag); @@ -262,15 +302,15 @@ int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, t3_wr_flags = 0; if (wr->send_flags & IB_SEND_SOLICITED) t3_wr_flags |= T3_SOLICITED_EVENT_FLAG; - if (wr->send_flags & IB_SEND_FENCE) - t3_wr_flags |= T3_READ_FENCE_FLAG; if (wr->send_flags & IB_SEND_SIGNALED) t3_wr_flags |= T3_COMPLETION_FLAG; sqp = qhp->wq.sq + Q_PTR2IDX(qhp->wq.sq_wptr, qhp->wq.sq_size_log2); switch (wr->opcode) { case IB_WR_SEND: - case IB_WR_SEND_WITH_IMM: + case IB_WR_SEND_WITH_INV: + if (wr->send_flags & IB_SEND_FENCE) + t3_wr_flags |= T3_READ_FENCE_FLAG; t3_wr_opcode = T3_WR_SEND; err = iwch_build_rdma_send(wqe, wr, &t3_wr_flit_cnt); break; @@ -280,6 +320,7 @@ int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, err = iwch_build_rdma_write(wqe, wr, &t3_wr_flit_cnt); break; case IB_WR_RDMA_READ: + case IB_WR_RDMA_READ_WITH_INV: t3_wr_opcode = T3_WR_READ; t3_wr_flags = 0; /* T3 reads are always signaled */ err = iwch_build_rdma_read(wqe, wr, &t3_wr_flit_cnt); @@ -289,6 +330,17 @@ int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, if (!qhp->wq.oldest_read) qhp->wq.oldest_read = sqp; break; + case IB_WR_FAST_REG_MR: + t3_wr_opcode = T3_WR_FASTREG; + err = iwch_build_fastreg(wqe, wr, &t3_wr_flit_cnt, + &wr_cnt, &qhp->wq); + break; + case IB_WR_LOCAL_INV: + if (wr->send_flags & IB_SEND_FENCE) + t3_wr_flags |= T3_LOCAL_FENCE_FLAG; + t3_wr_opcode = T3_WR_INV_STAG; + err = iwch_build_inv_stag(wqe, wr, &t3_wr_flit_cnt); + break; default: PDBG("%s post of type=%d TBD!\n", __func__, wr->opcode); @@ -307,14 +359,15 @@ int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, build_fw_riwrh((void *) wqe, t3_wr_opcode, t3_wr_flags, Q_GENBIT(qhp->wq.wptr, qhp->wq.size_log2), - 0, t3_wr_flit_cnt); + 0, t3_wr_flit_cnt, + (wr_cnt == 1) ? T3_SOPEOP : T3_SOP); PDBG("%s cookie 0x%llx wq idx 0x%x swsq idx %ld opcode %d\n", __func__, (unsigned long long) wr->wr_id, idx, Q_PTR2IDX(qhp->wq.sq_wptr, qhp->wq.sq_size_log2), sqp->opcode); wr = wr->next; num_wrs--; - ++(qhp->wq.wptr); + qhp->wq.wptr += wr_cnt; ++(qhp->wq.sq_wptr); } spin_unlock_irqrestore(&qhp->lock, flag); @@ -359,7 +412,7 @@ int iwch_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, wr->wr_id; build_fw_riwrh((void *) wqe, T3_WR_RCV, T3_COMPLETION_FLAG, Q_GENBIT(qhp->wq.wptr, qhp->wq.size_log2), - 0, sizeof(struct t3_receive_wr) >> 3); + 0, sizeof(struct t3_receive_wr) >> 3, T3_SOPEOP); PDBG("%s cookie 0x%llx idx 0x%x rq_wptr 0x%x rw_rptr 0x%x " "wqe %p \n", __func__, (unsigned long long) wr->wr_id, idx, qhp->wq.rq_wptr, qhp->wq.rq_rptr, wqe); @@ -419,10 +472,10 @@ int iwch_bind_mw(struct ib_qp *qp, sgl.lkey = mw_bind->mr->lkey; sgl.length = mw_bind->length; wqe->bind.reserved = 0; - wqe->bind.type = T3_VA_BASED_TO; + wqe->bind.type = TPT_VATO; /* TBD: check perms */ - wqe->bind.perms = iwch_ib_to_mwbind_access(mw_bind->mw_access_flags); + wqe->bind.perms = iwch_ib_to_tpt_access(mw_bind->mw_access_flags); wqe->bind.mr_stag = cpu_to_be32(mw_bind->mr->lkey); wqe->bind.mw_stag = cpu_to_be32(mw->rkey); wqe->bind.mw_len = cpu_to_be32(mw_bind->length); @@ -430,7 +483,7 @@ int iwch_bind_mw(struct ib_qp *qp, err = iwch_sgl2pbl_map(rhp, &sgl, 1, &pbl_addr, &page_size); if (err) { spin_unlock_irqrestore(&qhp->lock, flag); - return err; + return err; } wqe->send.wrid.id0.hi = qhp->wq.sq_wptr; sqp = qhp->wq.sq + Q_PTR2IDX(qhp->wq.sq_wptr, qhp->wq.sq_size_log2); @@ -441,10 +494,9 @@ int iwch_bind_mw(struct ib_qp *qp, sqp->signaled = (mw_bind->send_flags & IB_SEND_SIGNALED); wqe->bind.mr_pbl_addr = cpu_to_be32(pbl_addr); wqe->bind.mr_pagesz = page_size; - wqe->flit[T3_SQ_COOKIE_FLIT] = mw_bind->wr_id; build_fw_riwrh((void *)wqe, T3_WR_BIND, t3_wr_flags, Q_GENBIT(qhp->wq.wptr, qhp->wq.size_log2), 0, - sizeof(struct t3_bind_mw_wr) >> 3); + sizeof(struct t3_bind_mw_wr) >> 3, T3_SOPEOP); ++(qhp->wq.wptr); ++(qhp->wq.sq_wptr); spin_unlock_irqrestore(&qhp->lock, flag); -- cgit v1.2.3 From d1f2cd895f8733faa9d79d09d825a2ed80002ac7 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 14 Jul 2008 23:48:45 -0700 Subject: IB/mlx4: Configure QPs' max message size based on real device capability ConnectX returns the max message size it supports through the QUERY_DEV_CAP firmware command. When modifying a QP to RTR, the max message size for the QP must be specified. This value must not exceed the value declared through QUERY_DEV_CAP. The current code ignores the max allowed size and unconditionally sets the value to 2^31. This patch sets all QPs to the max value allowed as returned from firmware. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/qp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 4b0ac5d68c46..76054a72f71b 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -908,7 +908,8 @@ static int __mlx4_ib_modify_qp(struct ib_qp *ibqp, attr->path_mtu); goto out; } - context->mtu_msgmax = (attr->path_mtu << 5) | 31; + context->mtu_msgmax = (attr->path_mtu << 5) | + ilog2(dev->dev->caps.max_msg_sz); } if (qp->rq.wqe_cnt) -- cgit v1.2.3 From 6578cf33989a594bab37af988d45d87812b946b8 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 14 Jul 2008 23:48:45 -0700 Subject: IB/mlx4: Pass congestion management class MADs to the HCA ConnectX HCAs support the IB_MGMT_CLASS_CONG_MGMT management class, so process MADs of this class through the MAD_IFC firmware command. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/mad.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c index 4c1e72fc8f57..cdca3a511e1c 100644 --- a/drivers/infiniband/hw/mlx4/mad.c +++ b/drivers/infiniband/hw/mlx4/mad.c @@ -255,7 +255,8 @@ int mlx4_ib_process_mad(struct ib_device *ibdev, int mad_flags, u8 port_num, return IB_MAD_RESULT_SUCCESS; } else if (in_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_PERF_MGMT || in_mad->mad_hdr.mgmt_class == MLX4_IB_VENDOR_CLASS1 || - in_mad->mad_hdr.mgmt_class == MLX4_IB_VENDOR_CLASS2) { + in_mad->mad_hdr.mgmt_class == MLX4_IB_VENDOR_CLASS2 || + in_mad->mad_hdr.mgmt_class == IB_MGMT_CLASS_CONG_MGMT) { if (in_mad->mad_hdr.method != IB_MGMT_METHOD_GET && in_mad->mad_hdr.method != IB_MGMT_METHOD_SET) return IB_MAD_RESULT_SUCCESS; -- cgit v1.2.3 From e5a5e7d59af5944a674b9cea420a1fedc60496f2 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Mon, 14 Jul 2008 23:48:46 -0700 Subject: IB/core: Reset to error QP state transition is not allowed I was reviewing the QP state transition diagram in the IB 1.2.1 spec and the code for qp_state_table[], and noticed that the code allows a QP to be modified from IB_QPS_RESET to IB_QPS_ERR whereas the notes for figure 124 (pg 457) specifically says that this transition isn't allowed. This is a clarification from earlier versions of the IB spec, which were ambiguous in this area and suggested that the RESET to ERR transition was allowed. Fix up the qp_state_table[] to make RESET->ERR not allowed. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/core/verbs.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c index e0fbe5975866..a7da9be43e61 100644 --- a/drivers/infiniband/core/verbs.c +++ b/drivers/infiniband/core/verbs.c @@ -315,7 +315,6 @@ static const struct { } qp_state_table[IB_QPS_ERR + 1][IB_QPS_ERR + 1] = { [IB_QPS_RESET] = { [IB_QPS_RESET] = { .valid = 1 }, - [IB_QPS_ERR] = { .valid = 1 }, [IB_QPS_INIT] = { .valid = 1, .req_param = { -- cgit v1.2.3 From d3809ad0972297fbc7ef0585049ef465d9d8d79d Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 23:48:46 -0700 Subject: IB/mthca: Remove extra code for RESET->ERR QP state transition Commit b18aad71 ("IB/mthca: Fix RESET to ERROR transition") added some extra code to handle a QP state transition from RESET to ERROR. However, the latest 1.2.1 version of the IB spec has clarified that this transition is actually not allowed, so we can remove this extra code again. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_qp.c | 26 -------------------------- 1 file changed, 26 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 3b1c5baf13b1..77b52b3adcc7 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -848,23 +848,6 @@ out: return err; } -static const struct ib_qp_attr dummy_init_attr = { .port_num = 1 }; -static const int dummy_init_attr_mask[] = { - [IB_QPT_UD] = (IB_QP_PKEY_INDEX | - IB_QP_PORT | - IB_QP_QKEY), - [IB_QPT_UC] = (IB_QP_PKEY_INDEX | - IB_QP_PORT | - IB_QP_ACCESS_FLAGS), - [IB_QPT_RC] = (IB_QP_PKEY_INDEX | - IB_QP_PORT | - IB_QP_ACCESS_FLAGS), - [IB_QPT_SMI] = (IB_QP_PKEY_INDEX | - IB_QP_QKEY), - [IB_QPT_GSI] = (IB_QP_PKEY_INDEX | - IB_QP_QKEY), -}; - int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask, struct ib_udata *udata) { @@ -926,15 +909,6 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask, goto out; } - if (cur_state == IB_QPS_RESET && new_state == IB_QPS_ERR) { - err = __mthca_modify_qp(ibqp, &dummy_init_attr, - dummy_init_attr_mask[ibqp->qp_type], - IB_QPS_RESET, IB_QPS_INIT); - if (err) - goto out; - cur_state = IB_QPS_INIT; - } - err = __mthca_modify_qp(ibqp, attr, attr_mask, cur_state, new_state); out: -- cgit v1.2.3 From 7c27f358209a8ce7c57b584346d7b611e823f1b1 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 23:48:46 -0700 Subject: IB/mlx4: Remove extra code for RESET->ERR QP state transition Commit 65adfa91 ("IB/mlx4: Fix RESET to RESET and RESET to ERROR transitions") added some extra code to handle a QP state transition from RESET to ERROR. However, the latest 1.2.1 version of the IB spec has clarified that this transition is actually not allowed, so we can remove this extra code again. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/qp.c | 26 -------------------------- 1 file changed, 26 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 76054a72f71b..44bbd6c2e315 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1132,23 +1132,6 @@ out: return err; } -static const struct ib_qp_attr mlx4_ib_qp_attr = { .port_num = 1 }; -static const int mlx4_ib_qp_attr_mask_table[IB_QPT_UD + 1] = { - [IB_QPT_UD] = (IB_QP_PKEY_INDEX | - IB_QP_PORT | - IB_QP_QKEY), - [IB_QPT_UC] = (IB_QP_PKEY_INDEX | - IB_QP_PORT | - IB_QP_ACCESS_FLAGS), - [IB_QPT_RC] = (IB_QP_PKEY_INDEX | - IB_QP_PORT | - IB_QP_ACCESS_FLAGS), - [IB_QPT_SMI] = (IB_QP_PKEY_INDEX | - IB_QP_QKEY), - [IB_QPT_GSI] = (IB_QP_PKEY_INDEX | - IB_QP_QKEY), -}; - int mlx4_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask, struct ib_udata *udata) { @@ -1191,15 +1174,6 @@ int mlx4_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, goto out; } - if (cur_state == IB_QPS_RESET && new_state == IB_QPS_ERR) { - err = __mlx4_ib_modify_qp(ibqp, &mlx4_ib_qp_attr, - mlx4_ib_qp_attr_mask_table[ibqp->qp_type], - IB_QPS_RESET, IB_QPS_INIT); - if (err) - goto out; - cur_state = IB_QPS_INIT; - } - err = __mlx4_ib_modify_qp(ibqp, attr, attr_mask, cur_state, new_state); out: -- cgit v1.2.3 From 3e255eac561672cbc92844b9f16cae9304c2a783 Mon Sep 17 00:00:00 2001 From: Joachim Fenkes Date: Mon, 14 Jul 2008 23:48:47 -0700 Subject: IB/ehca: Reject receive work requests if QP is in RESET state Signed-off-by: Joachim Fenkes Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_reqs.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index b799b2710210..dd9bc68f1c7b 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -544,8 +544,16 @@ int ehca_post_recv(struct ib_qp *qp, struct ib_recv_wr *recv_wr, struct ib_recv_wr **bad_recv_wr) { - return internal_post_recv(container_of(qp, struct ehca_qp, ib_qp), - qp->device, recv_wr, bad_recv_wr); + struct ehca_qp *my_qp = container_of(qp, struct ehca_qp, ib_qp); + + /* Reject WR if QP is in RESET state */ + if (unlikely(my_qp->state == IB_QPS_RESET)) { + ehca_err(qp->device, "Invalid QP state qp_state=%d qpn=%x", + my_qp->state, qp->qp_num); + return -EINVAL; + } + + return internal_post_recv(my_qp, qp->device, recv_wr, bad_recv_wr); } int ehca_post_srq_recv(struct ib_srq *srq, -- cgit v1.2.3 From 6f7bc01a7382641c61ec036d68ff3a9140b48a1c Mon Sep 17 00:00:00 2001 From: Stefan Roscher Date: Mon, 14 Jul 2008 23:48:47 -0700 Subject: IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts During corner case testing, we noticed that some versions of ehca do not properly transition to interrupt done in special load situations. This can be resolved by periodically triggering EOI through H_EOI, if EQEs are pending. Signed-off-by: Stefan Roscher Acked-by: Benjamin Herrenschmidt Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_irq.c | 9 +++++++-- drivers/infiniband/hw/ehca/hcp_if.c | 10 ++++++++++ drivers/infiniband/hw/ehca/hcp_if.h | 1 + 3 files changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c index ce1ab0571be3..0792d930c481 100644 --- a/drivers/infiniband/hw/ehca/ehca_irq.c +++ b/drivers/infiniband/hw/ehca/ehca_irq.c @@ -531,7 +531,7 @@ void ehca_process_eq(struct ehca_shca *shca, int is_irq) { struct ehca_eq *eq = &shca->eq; struct ehca_eqe_cache_entry *eqe_cache = eq->eqe_cache; - u64 eqe_value; + u64 eqe_value, ret; unsigned long flags; int eqe_cnt, i; int eq_empty = 0; @@ -583,8 +583,13 @@ void ehca_process_eq(struct ehca_shca *shca, int is_irq) ehca_dbg(&shca->ib_device, "No eqe found for irq event"); goto unlock_irq_spinlock; - } else if (!is_irq) + } else if (!is_irq) { + ret = hipz_h_eoi(eq->ist); + if (ret != H_SUCCESS) + ehca_err(&shca->ib_device, + "bad return code EOI -rc = %ld\n", ret); ehca_dbg(&shca->ib_device, "deadman found %x eqe", eqe_cnt); + } if (unlikely(eqe_cnt == EHCA_EQE_CACHE_SIZE)) ehca_dbg(&shca->ib_device, "too many eqes for one irq event"); /* enable irq for new packets */ diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c index 5245e13c3a30..415d3a465de6 100644 --- a/drivers/infiniband/hw/ehca/hcp_if.c +++ b/drivers/infiniband/hw/ehca/hcp_if.c @@ -933,3 +933,13 @@ u64 hipz_h_error_data(const struct ipz_adapter_handle adapter_handle, r_cb, 0, 0, 0, 0); } + +u64 hipz_h_eoi(int irq) +{ + unsigned long xirr; + + iosync(); + xirr = (0xffULL << 24) | irq; + + return plpar_hcall_norets(H_EOI, xirr); +} diff --git a/drivers/infiniband/hw/ehca/hcp_if.h b/drivers/infiniband/hw/ehca/hcp_if.h index 60ce02b70663..2c3c6e0ea5c2 100644 --- a/drivers/infiniband/hw/ehca/hcp_if.h +++ b/drivers/infiniband/hw/ehca/hcp_if.h @@ -260,5 +260,6 @@ u64 hipz_h_error_data(const struct ipz_adapter_handle adapter_handle, const u64 ressource_handle, void *rblock, unsigned long *byte_count); +u64 hipz_h_eoi(int irq); #endif /* __HCP_IF_H__ */ -- cgit v1.2.3 From 97d1cc8055c7b3fbd35bf693775d61102e65d174 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 14 Jul 2008 23:48:47 -0700 Subject: RDMA/cxgb3: Fix up some ib_device_attr fields - set fw_ver - set hw_ver - set max_qp_wr to something reasonable - set max_cqe to something reasonable Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/cxio_hal.h | 3 ++- drivers/infiniband/hw/cxgb3/iwch.c | 4 ++-- drivers/infiniband/hw/cxgb3/iwch_provider.c | 25 +++++++++++++++++++++++++ 3 files changed, 29 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.h b/drivers/infiniband/hw/cxgb3/cxio_hal.h index 25a880664e6b..a9ff32c36211 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.h +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.h @@ -45,13 +45,14 @@ #define T3_CTRL_QP_SIZE_LOG2 8 #define T3_CTRL_CQ_ID 0 -/* TBD */ #define T3_MAX_NUM_RI (1<<15) #define T3_MAX_NUM_QP (1<<15) #define T3_MAX_NUM_CQ (1<<15) #define T3_MAX_NUM_PD (1<<15) #define T3_MAX_PBL_SIZE 256 #define T3_MAX_RQ_SIZE 1024 +#define T3_MAX_QP_DEPTH (T3_MAX_RQ_SIZE-1) +#define T3_MAX_CQ_DEPTH 8192 #define T3_MAX_NUM_STAG (1<<15) #define T3_MAX_MR_SIZE 0x100000000ULL diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c index 71554eacb13c..e09cc1a81999 100644 --- a/drivers/infiniband/hw/cxgb3/iwch.c +++ b/drivers/infiniband/hw/cxgb3/iwch.c @@ -74,11 +74,11 @@ static void rnic_init(struct iwch_dev *rnicp) rnicp->attr.vendor_id = 0x168; rnicp->attr.vendor_part_id = 7; rnicp->attr.max_qps = T3_MAX_NUM_QP - 32; - rnicp->attr.max_wrs = (1UL << 24) - 1; + rnicp->attr.max_wrs = T3_MAX_QP_DEPTH; rnicp->attr.max_sge_per_wr = T3_MAX_SGE; rnicp->attr.max_sge_per_rdma_write_wr = T3_MAX_SGE; rnicp->attr.max_cqs = T3_MAX_NUM_CQ - 1; - rnicp->attr.max_cqes_per_cq = (1UL << 24) - 1; + rnicp->attr.max_cqes_per_cq = T3_MAX_CQ_DEPTH; rnicp->attr.max_mem_regs = cxio_num_stags(&rnicp->rdev); rnicp->attr.max_phys_buf_entries = T3_MAX_PBL_SIZE; rnicp->attr.max_pds = T3_MAX_NUM_PD - 1; diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index 5d504f3ed68b..5f4380657392 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1093,6 +1093,29 @@ static int iwch_query_gid(struct ib_device *ibdev, u8 port, return 0; } +static u64 fw_vers_string_to_u64(struct iwch_dev *iwch_dev) +{ + struct ethtool_drvinfo info; + struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev; + char *cp, *next; + unsigned fw_maj, fw_min, fw_mic; + + rtnl_lock(); + lldev->ethtool_ops->get_drvinfo(lldev, &info); + rtnl_unlock(); + + next = info.fw_version + 1; + cp = strsep(&next, "."); + sscanf(cp, "%i", &fw_maj); + cp = strsep(&next, "."); + sscanf(cp, "%i", &fw_min); + cp = strsep(&next, "."); + sscanf(cp, "%i", &fw_mic); + + return (((u64)fw_maj & 0xffff) << 32) | ((fw_min & 0xffff) << 16) | + (fw_mic & 0xffff); +} + static int iwch_query_device(struct ib_device *ibdev, struct ib_device_attr *props) { @@ -1103,6 +1126,8 @@ static int iwch_query_device(struct ib_device *ibdev, dev = to_iwch_dev(ibdev); memset(props, 0, sizeof *props); memcpy(&props->sys_image_guid, dev->rdev.t3cdev_p->lldev->dev_addr, 6); + props->hw_ver = dev->rdev.t3cdev_p->type; + props->fw_ver = fw_vers_string_to_u64(dev); props->device_cap_flags = dev->device_cap_flags; props->vendor_id = (u32)dev->rdev.rnic_info.pdev->vendor; props->vendor_part_id = (u32)dev->rdev.rnic_info.pdev->device; -- cgit v1.2.3 From eec8845d29504a12fbd434e192d61aed3d9d74fa Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 23:48:47 -0700 Subject: RDMA/cxgb3: Remove write-only iwch_rnic_attributes fields The members struct iwch_rnic_attributes.vendor_id and .vendor_part_id are write-only, so we might as well get rid of them. Signed-off-by: Roland Dreier Acked-by: Steve Wise --- drivers/infiniband/hw/cxgb3/iwch.c | 2 -- drivers/infiniband/hw/cxgb3/iwch.h | 2 -- 2 files changed, 4 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c index e09cc1a81999..06086256ca1d 100644 --- a/drivers/infiniband/hw/cxgb3/iwch.c +++ b/drivers/infiniband/hw/cxgb3/iwch.c @@ -71,8 +71,6 @@ static void rnic_init(struct iwch_dev *rnicp) idr_init(&rnicp->mmidr); spin_lock_init(&rnicp->lock); - rnicp->attr.vendor_id = 0x168; - rnicp->attr.vendor_part_id = 7; rnicp->attr.max_qps = T3_MAX_NUM_QP - 32; rnicp->attr.max_wrs = T3_MAX_QP_DEPTH; rnicp->attr.max_sge_per_wr = T3_MAX_SGE; diff --git a/drivers/infiniband/hw/cxgb3/iwch.h b/drivers/infiniband/hw/cxgb3/iwch.h index d2409a505e8d..3773453b2cf0 100644 --- a/drivers/infiniband/hw/cxgb3/iwch.h +++ b/drivers/infiniband/hw/cxgb3/iwch.h @@ -48,8 +48,6 @@ struct iwch_qp; struct iwch_mr; struct iwch_rnic_attributes { - u32 vendor_id; - u32 vendor_part_id; u32 max_qps; u32 max_wrs; /* Max for any SQ/RQ */ u32 max_sge_per_wr; -- cgit v1.2.3 From 468f2239bcc71ae0f345c3fe58c797cf4627daf4 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 23:48:47 -0700 Subject: RDMA/cma: Add missing newlines to printk()s Signed-off-by: Roland Dreier Acked-by: Sean Hefty --- drivers/infiniband/core/cma.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index e5bd6172a1f6..44d190f67810 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -974,7 +974,7 @@ static int cma_ib_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) event.param.conn.private_data_len = IB_CM_REJ_PRIVATE_DATA_SIZE; break; default: - printk(KERN_ERR "RDMA CMA: unexpected IB CM event: %d", + printk(KERN_ERR "RDMA CMA: unexpected IB CM event: %d\n", ib_event->event); goto out; } @@ -1450,7 +1450,7 @@ static void cma_listen_on_dev(struct rdma_id_private *id_priv, ret = rdma_listen(id, id_priv->backlog); if (ret) printk(KERN_WARNING "RDMA CMA: cma_listen_on_dev, error %d, " - "listening on device %s", ret, cma_dev->device->name); + "listening on device %s\n", ret, cma_dev->device->name); } static void cma_listen_on_all(struct rdma_id_private *id_priv) @@ -2155,7 +2155,7 @@ static int cma_sidr_rep_handler(struct ib_cm_id *cm_id, event.status = 0; break; default: - printk(KERN_ERR "RDMA CMA: unexpected IB CM event: %d", + printk(KERN_ERR "RDMA CMA: unexpected IB CM event: %d\n", ib_event->event); goto out; } -- cgit v1.2.3 From a7d834c4bc6be73e8f83eaa5072fac3c5549f7f2 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 23:48:47 -0700 Subject: IPoIB/cm: Fix racy use of receive WR/SGL in ipoib_cm_post_receive_nonsrq() For devices that don't support SRQs, ipoib_cm_post_receive_nonsrq() is called from both ipoib_cm_handle_rx_wc() and ipoib_cm_nonsrq_init_rx(), and these two callers are not synchronized against each other. However, ipoib_cm_post_receive_nonsrq() always reuses the same receive work request and scatter list structures, so multiple callers can end up stepping on each other, which leads to posting garbled work requests. Fix this by having the caller pass in the ib_recv_wr and ib_sge structures to use, and allocating new local structures in ipoib_cm_nonsrq_init_rx(). Based on a patch by Pradeep Satyanarayana and David Wilder , with debugging help from Hoang-Nam Nguyen . Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 63 ++++++++++++++++++++++++--------- 1 file changed, 47 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 6223fc39af70..37bf67b2a26f 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -111,18 +111,20 @@ static int ipoib_cm_post_receive_srq(struct net_device *dev, int id) } static int ipoib_cm_post_receive_nonsrq(struct net_device *dev, - struct ipoib_cm_rx *rx, int id) + struct ipoib_cm_rx *rx, + struct ib_recv_wr *wr, + struct ib_sge *sge, int id) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ib_recv_wr *bad_wr; int i, ret; - priv->cm.rx_wr.wr_id = id | IPOIB_OP_CM | IPOIB_OP_RECV; + wr->wr_id = id | IPOIB_OP_CM | IPOIB_OP_RECV; for (i = 0; i < IPOIB_CM_RX_SG; ++i) - priv->cm.rx_sge[i].addr = rx->rx_ring[id].mapping[i]; + sge[i].addr = rx->rx_ring[id].mapping[i]; - ret = ib_post_recv(rx->qp, &priv->cm.rx_wr, &bad_wr); + ret = ib_post_recv(rx->qp, wr, &bad_wr); if (unlikely(ret)) { ipoib_warn(priv, "post recv failed for buf %d (%d)\n", id, ret); ipoib_cm_dma_unmap_rx(priv, IPOIB_CM_RX_SG - 1, @@ -320,10 +322,33 @@ static int ipoib_cm_modify_rx_qp(struct net_device *dev, return 0; } +static void ipoib_cm_init_rx_wr(struct net_device *dev, + struct ib_recv_wr *wr, + struct ib_sge *sge) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + int i; + + for (i = 0; i < priv->cm.num_frags; ++i) + sge[i].lkey = priv->mr->lkey; + + sge[0].length = IPOIB_CM_HEAD_SIZE; + for (i = 1; i < priv->cm.num_frags; ++i) + sge[i].length = PAGE_SIZE; + + wr->next = NULL; + wr->sg_list = priv->cm.rx_sge; + wr->num_sge = priv->cm.num_frags; +} + static int ipoib_cm_nonsrq_init_rx(struct net_device *dev, struct ib_cm_id *cm_id, struct ipoib_cm_rx *rx) { struct ipoib_dev_priv *priv = netdev_priv(dev); + struct { + struct ib_recv_wr wr; + struct ib_sge sge[IPOIB_CM_RX_SG]; + } *t; int ret; int i; @@ -331,6 +356,14 @@ static int ipoib_cm_nonsrq_init_rx(struct net_device *dev, struct ib_cm_id *cm_i if (!rx->rx_ring) return -ENOMEM; + t = kmalloc(sizeof *t, GFP_KERNEL); + if (!t) { + ret = -ENOMEM; + goto err_free; + } + + ipoib_cm_init_rx_wr(dev, &t->wr, t->sge); + spin_lock_irq(&priv->lock); if (priv->cm.nonsrq_conn_qp >= ipoib_max_conn_qp) { @@ -349,8 +382,8 @@ static int ipoib_cm_nonsrq_init_rx(struct net_device *dev, struct ib_cm_id *cm_i ipoib_warn(priv, "failed to allocate receive buffer %d\n", i); ret = -ENOMEM; goto err_count; - } - ret = ipoib_cm_post_receive_nonsrq(dev, rx, i); + } + ret = ipoib_cm_post_receive_nonsrq(dev, rx, &t->wr, t->sge, i); if (ret) { ipoib_warn(priv, "ipoib_cm_post_receive_nonsrq " "failed for buf %d\n", i); @@ -361,6 +394,8 @@ static int ipoib_cm_nonsrq_init_rx(struct net_device *dev, struct ib_cm_id *cm_i rx->recv_count = ipoib_recvq_size; + kfree(t); + return 0; err_count: @@ -369,6 +404,7 @@ err_count: spin_unlock_irq(&priv->lock); err_free: + kfree(t); ipoib_cm_free_rx_ring(dev, rx->rx_ring); return ret; @@ -637,7 +673,10 @@ repost: ipoib_warn(priv, "ipoib_cm_post_receive_srq failed " "for buf %d\n", wr_id); } else { - if (unlikely(ipoib_cm_post_receive_nonsrq(dev, p, wr_id))) { + if (unlikely(ipoib_cm_post_receive_nonsrq(dev, p, + &priv->cm.rx_wr, + priv->cm.rx_sge, + wr_id))) { --p->recv_count; ipoib_warn(priv, "ipoib_cm_post_receive_nonsrq failed " "for buf %d\n", wr_id); @@ -1502,15 +1541,7 @@ int ipoib_cm_dev_init(struct net_device *dev) priv->cm.num_frags = IPOIB_CM_RX_SG; } - for (i = 0; i < priv->cm.num_frags; ++i) - priv->cm.rx_sge[i].lkey = priv->mr->lkey; - - priv->cm.rx_sge[0].length = IPOIB_CM_HEAD_SIZE; - for (i = 1; i < priv->cm.num_frags; ++i) - priv->cm.rx_sge[i].length = PAGE_SIZE; - priv->cm.rx_wr.next = NULL; - priv->cm.rx_wr.sg_list = priv->cm.rx_sge; - priv->cm.rx_wr.num_sge = priv->cm.num_frags; + ipoib_cm_init_rx_wr(dev, &priv->cm.rx_wr, priv->cm.rx_sge); if (ipoib_cm_has_srq(dev)) { for (i = 0; i < ipoib_recvq_size; ++i) { -- cgit v1.2.3 From 7f624d023b5fb150831e02c1e4c0f2619ade72c2 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 14 Jul 2008 23:48:48 -0700 Subject: RDMA/core: Add iWARP protocol statistics attributes in sysfs This patch adds a sysfs attribute group called "proto_stats" under /sys/class/infiniband/$device/ and populates this group with protocol statistics if they exist for a given device. Currently, only iWARP stats are defined, but the code is designed to allow InfiniBand protocol stats if they become available. These stats are per-device and more importantly -not- per port. Details: - Add union rdma_protocol_stats in ib_verbs.h. This union allows defining transport-specific stats. Currently only iwarp stats are defined. - Add struct iw_protocol_stats to define the current set of iwarp protocol stats. - Add new ib_device method called get_proto_stats() to return protocol statistics. - Add logic in core/sysfs.c to create iwarp protocol stats attributes if the device is an RNIC and has a get_proto_stats() method. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/core/sysfs.c | 120 ++++++++++++++++++++++++++++++++++++++++ include/rdma/ib_verbs.h | 53 ++++++++++++++++++ 2 files changed, 173 insertions(+) diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c index 36a0ef97c6a5..4d1042115598 100644 --- a/drivers/infiniband/core/sysfs.c +++ b/drivers/infiniband/core/sysfs.c @@ -663,6 +663,120 @@ static struct class ib_class = { .dev_uevent = ib_device_uevent, }; +/* Show a given an attribute in the statistics group */ +static ssize_t show_protocol_stat(const struct device *device, + struct device_attribute *attr, char *buf, + unsigned offset) +{ + struct ib_device *dev = container_of(device, struct ib_device, dev); + union rdma_protocol_stats stats; + ssize_t ret; + + ret = dev->get_protocol_stats(dev, &stats); + if (ret) + return ret; + + return sprintf(buf, "%llu\n", + (unsigned long long) ((u64 *) &stats)[offset]); +} + +/* generate a read-only iwarp statistics attribute */ +#define IW_STATS_ENTRY(name) \ +static ssize_t show_##name(struct device *device, \ + struct device_attribute *attr, char *buf) \ +{ \ + return show_protocol_stat(device, attr, buf, \ + offsetof(struct iw_protocol_stats, name) / \ + sizeof (u64)); \ +} \ +static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL) + +IW_STATS_ENTRY(ipInReceives); +IW_STATS_ENTRY(ipInHdrErrors); +IW_STATS_ENTRY(ipInTooBigErrors); +IW_STATS_ENTRY(ipInNoRoutes); +IW_STATS_ENTRY(ipInAddrErrors); +IW_STATS_ENTRY(ipInUnknownProtos); +IW_STATS_ENTRY(ipInTruncatedPkts); +IW_STATS_ENTRY(ipInDiscards); +IW_STATS_ENTRY(ipInDelivers); +IW_STATS_ENTRY(ipOutForwDatagrams); +IW_STATS_ENTRY(ipOutRequests); +IW_STATS_ENTRY(ipOutDiscards); +IW_STATS_ENTRY(ipOutNoRoutes); +IW_STATS_ENTRY(ipReasmTimeout); +IW_STATS_ENTRY(ipReasmReqds); +IW_STATS_ENTRY(ipReasmOKs); +IW_STATS_ENTRY(ipReasmFails); +IW_STATS_ENTRY(ipFragOKs); +IW_STATS_ENTRY(ipFragFails); +IW_STATS_ENTRY(ipFragCreates); +IW_STATS_ENTRY(ipInMcastPkts); +IW_STATS_ENTRY(ipOutMcastPkts); +IW_STATS_ENTRY(ipInBcastPkts); +IW_STATS_ENTRY(ipOutBcastPkts); +IW_STATS_ENTRY(tcpRtoAlgorithm); +IW_STATS_ENTRY(tcpRtoMin); +IW_STATS_ENTRY(tcpRtoMax); +IW_STATS_ENTRY(tcpMaxConn); +IW_STATS_ENTRY(tcpActiveOpens); +IW_STATS_ENTRY(tcpPassiveOpens); +IW_STATS_ENTRY(tcpAttemptFails); +IW_STATS_ENTRY(tcpEstabResets); +IW_STATS_ENTRY(tcpCurrEstab); +IW_STATS_ENTRY(tcpInSegs); +IW_STATS_ENTRY(tcpOutSegs); +IW_STATS_ENTRY(tcpRetransSegs); +IW_STATS_ENTRY(tcpInErrs); +IW_STATS_ENTRY(tcpOutRsts); + +static struct attribute *iw_proto_stats_attrs[] = { + &dev_attr_ipInReceives.attr, + &dev_attr_ipInHdrErrors.attr, + &dev_attr_ipInTooBigErrors.attr, + &dev_attr_ipInNoRoutes.attr, + &dev_attr_ipInAddrErrors.attr, + &dev_attr_ipInUnknownProtos.attr, + &dev_attr_ipInTruncatedPkts.attr, + &dev_attr_ipInDiscards.attr, + &dev_attr_ipInDelivers.attr, + &dev_attr_ipOutForwDatagrams.attr, + &dev_attr_ipOutRequests.attr, + &dev_attr_ipOutDiscards.attr, + &dev_attr_ipOutNoRoutes.attr, + &dev_attr_ipReasmTimeout.attr, + &dev_attr_ipReasmReqds.attr, + &dev_attr_ipReasmOKs.attr, + &dev_attr_ipReasmFails.attr, + &dev_attr_ipFragOKs.attr, + &dev_attr_ipFragFails.attr, + &dev_attr_ipFragCreates.attr, + &dev_attr_ipInMcastPkts.attr, + &dev_attr_ipOutMcastPkts.attr, + &dev_attr_ipInBcastPkts.attr, + &dev_attr_ipOutBcastPkts.attr, + &dev_attr_tcpRtoAlgorithm.attr, + &dev_attr_tcpRtoMin.attr, + &dev_attr_tcpRtoMax.attr, + &dev_attr_tcpMaxConn.attr, + &dev_attr_tcpActiveOpens.attr, + &dev_attr_tcpPassiveOpens.attr, + &dev_attr_tcpAttemptFails.attr, + &dev_attr_tcpEstabResets.attr, + &dev_attr_tcpCurrEstab.attr, + &dev_attr_tcpInSegs.attr, + &dev_attr_tcpOutSegs.attr, + &dev_attr_tcpRetransSegs.attr, + &dev_attr_tcpInErrs.attr, + &dev_attr_tcpOutRsts.attr, + NULL +}; + +static struct attribute_group iw_stats_group = { + .name = "proto_stats", + .attrs = iw_proto_stats_attrs, +}; + int ib_device_register_sysfs(struct ib_device *device) { struct device *class_dev = &device->dev; @@ -705,6 +819,12 @@ int ib_device_register_sysfs(struct ib_device *device) } } + if (device->node_type == RDMA_NODE_RNIC && device->get_protocol_stats) { + ret = sysfs_create_group(&class_dev->kobj, &iw_stats_group); + if (ret) + goto err_put; + } + return 0; err_put: diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 74c24b908908..10ebaaae0161 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -226,6 +226,57 @@ static inline int ib_width_enum_to_int(enum ib_port_width width) } } +struct ib_protocol_stats { + /* TBD... */ +}; + +struct iw_protocol_stats { + u64 ipInReceives; + u64 ipInHdrErrors; + u64 ipInTooBigErrors; + u64 ipInNoRoutes; + u64 ipInAddrErrors; + u64 ipInUnknownProtos; + u64 ipInTruncatedPkts; + u64 ipInDiscards; + u64 ipInDelivers; + u64 ipOutForwDatagrams; + u64 ipOutRequests; + u64 ipOutDiscards; + u64 ipOutNoRoutes; + u64 ipReasmTimeout; + u64 ipReasmReqds; + u64 ipReasmOKs; + u64 ipReasmFails; + u64 ipFragOKs; + u64 ipFragFails; + u64 ipFragCreates; + u64 ipInMcastPkts; + u64 ipOutMcastPkts; + u64 ipInBcastPkts; + u64 ipOutBcastPkts; + + u64 tcpRtoAlgorithm; + u64 tcpRtoMin; + u64 tcpRtoMax; + u64 tcpMaxConn; + u64 tcpActiveOpens; + u64 tcpPassiveOpens; + u64 tcpAttemptFails; + u64 tcpEstabResets; + u64 tcpCurrEstab; + u64 tcpInSegs; + u64 tcpOutSegs; + u64 tcpRetransSegs; + u64 tcpInErrs; + u64 tcpOutRsts; +}; + +union rdma_protocol_stats { + struct ib_protocol_stats ib; + struct iw_protocol_stats iw; +}; + struct ib_port_attr { enum ib_port_state state; enum ib_mtu max_mtu; @@ -943,6 +994,8 @@ struct ib_device { struct iw_cm_verbs *iwcm; + int (*get_protocol_stats)(struct ib_device *device, + union rdma_protocol_stats *stats); int (*query_device)(struct ib_device *device, struct ib_device_attr *device_attr); int (*query_port)(struct ib_device *device, -- cgit v1.2.3 From 14cc180f7b032f8484c1a3d0533b1129ffe307fd Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 14 Jul 2008 23:48:48 -0700 Subject: RDMA/cxgb3: Add support for protocol statistics - Add a new rdma ctl command called RDMA_GET_MIB to the cxgb3 low level driver to obtain the protocol mib from the rnic hardware. - Add new iw_cxgb3 provider method to get the MIB from the low level driver. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/iwch_provider.c | 62 +++++++++++++++++++++++++++-- drivers/net/cxgb3/cxgb3_ctl_defs.h | 1 + drivers/net/cxgb3/cxgb3_offload.c | 7 ++++ 3 files changed, 66 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index 5f4380657392..18a6609f5e01 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -56,6 +56,7 @@ #include "iwch_provider.h" #include "iwch_cm.h" #include "iwch_user.h" +#include "common.h" static int iwch_modify_port(struct ib_device *ibdev, u8 port, int port_modify_mask, @@ -1245,6 +1246,61 @@ static ssize_t show_board(struct device *dev, struct device_attribute *attr, iwch_dev->rdev.rnic_info.pdev->device); } +static int iwch_get_mib(struct ib_device *ibdev, + union rdma_protocol_stats *stats) +{ + struct iwch_dev *dev; + struct tp_mib_stats m; + int ret; + + PDBG("%s ibdev %p\n", __func__, ibdev); + dev = to_iwch_dev(ibdev); + ret = dev->rdev.t3cdev_p->ctl(dev->rdev.t3cdev_p, RDMA_GET_MIB, &m); + if (ret) + return -ENOSYS; + + memset(stats, 0, sizeof *stats); + stats->iw.ipInReceives = ((u64) m.ipInReceive_hi << 32) + + m.ipInReceive_lo; + stats->iw.ipInHdrErrors = ((u64) m.ipInHdrErrors_hi << 32) + + m.ipInHdrErrors_lo; + stats->iw.ipInAddrErrors = ((u64) m.ipInAddrErrors_hi << 32) + + m.ipInAddrErrors_lo; + stats->iw.ipInUnknownProtos = ((u64) m.ipInUnknownProtos_hi << 32) + + m.ipInUnknownProtos_lo; + stats->iw.ipInDiscards = ((u64) m.ipInDiscards_hi << 32) + + m.ipInDiscards_lo; + stats->iw.ipInDelivers = ((u64) m.ipInDelivers_hi << 32) + + m.ipInDelivers_lo; + stats->iw.ipOutRequests = ((u64) m.ipOutRequests_hi << 32) + + m.ipOutRequests_lo; + stats->iw.ipOutDiscards = ((u64) m.ipOutDiscards_hi << 32) + + m.ipOutDiscards_lo; + stats->iw.ipOutNoRoutes = ((u64) m.ipOutNoRoutes_hi << 32) + + m.ipOutNoRoutes_lo; + stats->iw.ipReasmTimeout = (u64) m.ipReasmTimeout; + stats->iw.ipReasmReqds = (u64) m.ipReasmReqds; + stats->iw.ipReasmOKs = (u64) m.ipReasmOKs; + stats->iw.ipReasmFails = (u64) m.ipReasmFails; + stats->iw.tcpActiveOpens = (u64) m.tcpActiveOpens; + stats->iw.tcpPassiveOpens = (u64) m.tcpPassiveOpens; + stats->iw.tcpAttemptFails = (u64) m.tcpAttemptFails; + stats->iw.tcpEstabResets = (u64) m.tcpEstabResets; + stats->iw.tcpOutRsts = (u64) m.tcpOutRsts; + stats->iw.tcpCurrEstab = (u64) m.tcpCurrEstab; + stats->iw.tcpInSegs = ((u64) m.tcpInSegs_hi << 32) + + m.tcpInSegs_lo; + stats->iw.tcpOutSegs = ((u64) m.tcpOutSegs_hi << 32) + + m.tcpOutSegs_lo; + stats->iw.tcpRetransSegs = ((u64) m.tcpRetransSeg_hi << 32) + + m.tcpRetransSeg_lo; + stats->iw.tcpInErrs = ((u64) m.tcpInErrs_hi << 32) + + m.tcpInErrs_lo; + stats->iw.tcpRtoMin = (u64) m.tcpRtoMin; + stats->iw.tcpRtoMax = (u64) m.tcpRtoMax; + return 0; +} + static DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL); static DEVICE_ATTR(fw_ver, S_IRUGO, show_fw_ver, NULL); static DEVICE_ATTR(hca_type, S_IRUGO, show_hca, NULL); @@ -1254,7 +1310,7 @@ static struct device_attribute *iwch_class_attributes[] = { &dev_attr_hw_rev, &dev_attr_fw_ver, &dev_attr_hca_type, - &dev_attr_board_id + &dev_attr_board_id, }; int iwch_register_device(struct iwch_dev *dev) @@ -1325,15 +1381,13 @@ int iwch_register_device(struct iwch_dev *dev) dev->ibdev.alloc_fast_reg_mr = iwch_alloc_fast_reg_mr; dev->ibdev.alloc_fast_reg_page_list = iwch_alloc_fastreg_pbl; dev->ibdev.free_fast_reg_page_list = iwch_free_fastreg_pbl; - dev->ibdev.attach_mcast = iwch_multicast_attach; dev->ibdev.detach_mcast = iwch_multicast_detach; dev->ibdev.process_mad = iwch_process_mad; - dev->ibdev.req_notify_cq = iwch_arm_cq; dev->ibdev.post_send = iwch_post_send; dev->ibdev.post_recv = iwch_post_receive; - + dev->ibdev.get_protocol_stats = iwch_get_mib; dev->ibdev.iwcm = kmalloc(sizeof(struct iw_cm_verbs), GFP_KERNEL); if (!dev->ibdev.iwcm) diff --git a/drivers/net/cxgb3/cxgb3_ctl_defs.h b/drivers/net/cxgb3/cxgb3_ctl_defs.h index 6c4f32066919..ed0ecd9679cb 100644 --- a/drivers/net/cxgb3/cxgb3_ctl_defs.h +++ b/drivers/net/cxgb3/cxgb3_ctl_defs.h @@ -54,6 +54,7 @@ enum { RDMA_CQ_DISABLE = 16, RDMA_CTRL_QP_SETUP = 17, RDMA_GET_MEM = 18, + RDMA_GET_MIB = 19, GET_RX_PAGE_INFO = 50, }; diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c index ff9c013ce535..cf2696873796 100644 --- a/drivers/net/cxgb3/cxgb3_offload.c +++ b/drivers/net/cxgb3/cxgb3_offload.c @@ -303,6 +303,12 @@ static int cxgb_rdma_ctl(struct adapter *adapter, unsigned int req, void *data) spin_unlock_irq(&adapter->sge.reg_lock); break; } + case RDMA_GET_MIB: { + spin_lock(&adapter->stats_lock); + t3_tp_get_mib_stats(adapter, (struct tp_mib_stats *)data); + spin_unlock(&adapter->stats_lock); + break; + } default: ret = -EOPNOTSUPP; } @@ -381,6 +387,7 @@ static int cxgb_offload_ctl(struct t3cdev *tdev, unsigned int req, void *data) case RDMA_CQ_DISABLE: case RDMA_CTRL_QP_SETUP: case RDMA_GET_MEM: + case RDMA_GET_MIB: if (!offload_running(adapter)) return -EAGAIN; return cxgb_rdma_ctl(adapter, req, data); -- cgit v1.2.3 From 47ee1b9f2e7bf73950602efe0b74fa1a8481f222 Mon Sep 17 00:00:00 2001 From: Ron Livne Date: Mon, 14 Jul 2008 23:48:48 -0700 Subject: IB/core: Add support for multicast loopback blocking This patch also adds a creation flag for QPs, IB_QP_CREATE_MULTICAST_BLOCK_LOOPBACK, which when set means that multicast sends from the QP to a group that the QP is attached to will not be looped back to the QP's receive queue. This can be used to save receive resources when a consumer does not want a local copy of multicast traffic; for example IPoIB must waste CPU time throwing away such local copies of multicast traffic. This patch also adds a device capability flag that shows whether a device supports this feature or not. Signed-off-by: Ron Livne Signed-off-by: Roland Dreier --- include/rdma/ib_verbs.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 10ebaaae0161..07b41e05565a 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -104,6 +104,7 @@ enum ib_device_cap_flags { IB_DEVICE_UD_IP_CSUM = (1<<18), IB_DEVICE_UD_TSO = (1<<19), IB_DEVICE_MEM_MGT_EXTENSIONS = (1<<21), + IB_DEVICE_BLOCK_MULTICAST_LOOPBACK = (1<<22), }; enum ib_atomic_cap { @@ -555,7 +556,8 @@ enum ib_qp_type { }; enum ib_qp_create_flags { - IB_QP_CREATE_IPOIB_UD_LSO = 1 << 0, + IB_QP_CREATE_IPOIB_UD_LSO = 1 << 0, + IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK = 1 << 1, }; struct ib_qp_init_attr { -- cgit v1.2.3 From 521e575b9a7324a0bca762622139f69582a042bf Mon Sep 17 00:00:00 2001 From: Ron Livne Date: Mon, 14 Jul 2008 23:48:48 -0700 Subject: IB/mlx4: Add support for blocking multicast loopback packets Add support for handling the IB_QP_CREATE_MULTICAST_BLOCK_LOOPBACK flag by using the per-multicast group loopback blocking feature of mlx4 hardware. Signed-off-by: Ron Livne Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/main.c | 7 +++++-- drivers/infiniband/hw/mlx4/mlx4_ib.h | 3 ++- drivers/infiniband/hw/mlx4/qp.c | 21 ++++++++++++++++++--- drivers/net/mlx4/mcg.c | 17 +++++++++++++---- include/linux/mlx4/device.h | 3 ++- 5 files changed, 40 insertions(+), 11 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 4d61e32866c6..bcf50648fa18 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -90,7 +90,8 @@ static int mlx4_ib_query_device(struct ib_device *ibdev, props->device_cap_flags = IB_DEVICE_CHANGE_PHY_PORT | IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SYS_IMAGE_GUID | - IB_DEVICE_RC_RNR_NAK_GEN; + IB_DEVICE_RC_RNR_NAK_GEN | + IB_DEVICE_BLOCK_MULTICAST_LOOPBACK; if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_BAD_PKEY_CNTR) props->device_cap_flags |= IB_DEVICE_BAD_PKEY_CNTR; if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_BAD_QKEY_CNTR) @@ -437,7 +438,9 @@ static int mlx4_ib_dealloc_pd(struct ib_pd *pd) static int mlx4_ib_mcg_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) { return mlx4_multicast_attach(to_mdev(ibqp->device)->dev, - &to_mqp(ibqp)->mqp, gid->raw); + &to_mqp(ibqp)->mqp, gid->raw, + !!(to_mqp(ibqp)->flags & + MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK)); } static int mlx4_ib_mcg_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h index 5cf994794d25..c4cf5b69eefa 100644 --- a/drivers/infiniband/hw/mlx4/mlx4_ib.h +++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h @@ -101,7 +101,8 @@ struct mlx4_ib_wq { }; enum mlx4_ib_qp_flags { - MLX4_IB_QP_LSO = 1 << 0 + MLX4_IB_QP_LSO = 1 << 0, + MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK = 1 << 1, }; struct mlx4_ib_qp { diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 44bbd6c2e315..91590e7fba0c 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -511,6 +511,9 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, } else { qp->sq_no_prefetch = 0; + if (init_attr->create_flags & IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK) + qp->flags |= MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK; + if (init_attr->create_flags & IB_QP_CREATE_IPOIB_UD_LSO) qp->flags |= MLX4_IB_QP_LSO; @@ -684,10 +687,15 @@ struct ib_qp *mlx4_ib_create_qp(struct ib_pd *pd, struct mlx4_ib_qp *qp; int err; - /* We only support LSO, and only for kernel UD QPs. */ - if (init_attr->create_flags & ~IB_QP_CREATE_IPOIB_UD_LSO) + /* + * We only support LSO and multicast loopback blocking, and + * only for kernel UD QPs. + */ + if (init_attr->create_flags & ~(IB_QP_CREATE_IPOIB_UD_LSO | + IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK)) return ERR_PTR(-EINVAL); - if (init_attr->create_flags & IB_QP_CREATE_IPOIB_UD_LSO && + + if (init_attr->create_flags && (pd->uobject || init_attr->qp_type != IB_QPT_UD)) return ERR_PTR(-EINVAL); @@ -1844,6 +1852,13 @@ done: qp_init_attr->cap = qp_attr->cap; + qp_init_attr->create_flags = 0; + if (qp->flags & MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK) + qp_init_attr->create_flags |= IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK; + + if (qp->flags & MLX4_IB_QP_LSO) + qp_init_attr->create_flags |= IB_QP_CREATE_IPOIB_UD_LSO; + out: mutex_unlock(&qp->mutex); return err; diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c index 57f7f1f0d4ec..b4b57870ddfd 100644 --- a/drivers/net/mlx4/mcg.c +++ b/drivers/net/mlx4/mcg.c @@ -38,6 +38,9 @@ #include "mlx4.h" +#define MGM_QPN_MASK 0x00FFFFFF +#define MGM_BLCK_LB_BIT 30 + struct mlx4_mgm { __be32 next_gid_index; __be32 members_count; @@ -153,7 +156,8 @@ static int find_mgm(struct mlx4_dev *dev, return err; } -int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]) +int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], + int block_mcast_loopback) { struct mlx4_priv *priv = mlx4_priv(dev); struct mlx4_cmd_mailbox *mailbox; @@ -202,13 +206,18 @@ int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]) } for (i = 0; i < members_count; ++i) - if (mgm->qp[i] == cpu_to_be32(qp->qpn)) { + if ((be32_to_cpu(mgm->qp[i]) & MGM_QPN_MASK) == qp->qpn) { mlx4_dbg(dev, "QP %06x already a member of MGM\n", qp->qpn); err = 0; goto out; } - mgm->qp[members_count++] = cpu_to_be32(qp->qpn); + if (block_mcast_loopback) + mgm->qp[members_count++] = cpu_to_be32((qp->qpn & MGM_QPN_MASK) | + (1 << MGM_BLCK_LB_BIT)); + else + mgm->qp[members_count++] = cpu_to_be32(qp->qpn & MGM_QPN_MASK); + mgm->members_count = cpu_to_be32(members_count); err = mlx4_WRITE_MCG(dev, index, mailbox); @@ -283,7 +292,7 @@ int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]) members_count = be32_to_cpu(mgm->members_count); for (loc = -1, i = 0; i < members_count; ++i) - if (mgm->qp[i] == cpu_to_be32(qp->qpn)) + if ((be32_to_cpu(mgm->qp[i]) & MGM_QPN_MASK) == qp->qpn) loc = i; if (loc == -1) { diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index a744383d16e9..81b3dd5206e0 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -398,7 +398,8 @@ int mlx4_srq_query(struct mlx4_dev *dev, struct mlx4_srq *srq, int *limit_waterm int mlx4_INIT_PORT(struct mlx4_dev *dev, int port); int mlx4_CLOSE_PORT(struct mlx4_dev *dev, int port); -int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]); +int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], + int block_mcast_loopback); int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]); int mlx4_map_phys_fmr(struct mlx4_dev *dev, struct mlx4_fmr *fmr, u64 *page_list, -- cgit v1.2.3 From 12406734051a26e9fe4c8568e931dfddbb72d431 Mon Sep 17 00:00:00 2001 From: Ron Livne Date: Mon, 14 Jul 2008 23:48:48 -0700 Subject: IPoIB: Use multicast loopback blocking if available Set IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK for IPoIB's UD QPs if supported by the underlying device. This creates an improvement of up to 39% in bandwidth when sending multicast packets with IPoIB, and an improvment of 12% in cpu usage. Signed-off-by: Ron Livne Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index 810790ae7530..7b8fa36f509b 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -199,7 +199,10 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca) init_attr.recv_cq = priv->recv_cq; if (priv->hca_caps & IB_DEVICE_UD_TSO) - init_attr.create_flags = IB_QP_CREATE_IPOIB_UD_LSO; + init_attr.create_flags |= IB_QP_CREATE_IPOIB_UD_LSO; + + if (priv->hca_caps & IB_DEVICE_BLOCK_MULTICAST_LOOPBACK) + init_attr.create_flags |= IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK; if (dev->features & NETIF_F_SG) init_attr.cap.max_send_sge = MAX_SKB_FRAGS + 1; -- cgit v1.2.3 From af40da894e96d5c826d38be3ea53ee00d9de0367 Mon Sep 17 00:00:00 2001 From: Vladimir Sokolovsky Date: Mon, 14 Jul 2008 23:48:48 -0700 Subject: IPoIB: add LRO support Add "ipoib_use_lro" module parameter to enable LRO and an "ipoib_lro_max_aggr" module parameter to set the max number of packets to be aggregated. Make LRO controllable and LRO statistics accessible through ethtool. Signed-off-by: Vladimir Sokolovsky Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/Kconfig | 1 + drivers/infiniband/ulp/ipoib/ipoib.h | 11 +++++ drivers/infiniband/ulp/ipoib/ipoib_ethtool.c | 46 +++++++++++++++++++++ drivers/infiniband/ulp/ipoib/ipoib_ib.c | 8 +++- drivers/infiniband/ulp/ipoib/ipoib_main.c | 62 ++++++++++++++++++++++++++++ 5 files changed, 127 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig index 1f76bad020f3..691525cf394a 100644 --- a/drivers/infiniband/ulp/ipoib/Kconfig +++ b/drivers/infiniband/ulp/ipoib/Kconfig @@ -1,6 +1,7 @@ config INFINIBAND_IPOIB tristate "IP-over-InfiniBand" depends on NETDEVICES && INET && (IPV6 || IPV6=n) + select INET_LRO ---help--- Support for the IP-over-InfiniBand protocol (IPoIB). This transports IP packets over InfiniBand so you can use your IB diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 8754b364f229..2c522572e3c5 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -50,6 +50,7 @@ #include #include #include +#include /* constants */ @@ -94,6 +95,9 @@ enum { IPOIB_MCAST_FLAG_BUSY = 2, /* joining or already joined */ IPOIB_MCAST_FLAG_ATTACHED = 3, + IPOIB_MAX_LRO_DESCRIPTORS = 8, + IPOIB_LRO_MAX_AGGR = 64, + MAX_SEND_CQE = 16, IPOIB_CM_COPYBREAK = 256, }; @@ -248,6 +252,11 @@ struct ipoib_ethtool_st { u16 max_coalesced_frames; }; +struct ipoib_lro { + struct net_lro_mgr lro_mgr; + struct net_lro_desc lro_desc[IPOIB_MAX_LRO_DESCRIPTORS]; +}; + /* * Device private locking: tx_lock protects members used in TX fast * path (and we use LLTX so upper layers don't do extra locking). @@ -334,6 +343,8 @@ struct ipoib_dev_priv { int hca_caps; struct ipoib_ethtool_st ethtool; struct timer_list poll_timer; + + struct ipoib_lro lro; }; struct ipoib_ah { diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c index 10279b79c44d..66af5c1a76e5 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c @@ -86,11 +86,57 @@ static int ipoib_set_coalesce(struct net_device *dev, return 0; } +static const char ipoib_stats_keys[][ETH_GSTRING_LEN] = { + "LRO aggregated", "LRO flushed", + "LRO avg aggr", "LRO no desc" +}; + +static void ipoib_get_strings(struct net_device *netdev, u32 stringset, u8 *data) +{ + switch (stringset) { + case ETH_SS_STATS: + memcpy(data, *ipoib_stats_keys, sizeof(ipoib_stats_keys)); + break; + } +} + +static int ipoib_get_sset_count(struct net_device *dev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(ipoib_stats_keys); + default: + return -EOPNOTSUPP; + } +} + +static void ipoib_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, uint64_t *data) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + int index = 0; + + /* Get LRO statistics */ + data[index++] = priv->lro.lro_mgr.stats.aggregated; + data[index++] = priv->lro.lro_mgr.stats.flushed; + if (priv->lro.lro_mgr.stats.flushed) + data[index++] = priv->lro.lro_mgr.stats.aggregated / + priv->lro.lro_mgr.stats.flushed; + else + data[index++] = 0; + data[index++] = priv->lro.lro_mgr.stats.no_desc; +} + static const struct ethtool_ops ipoib_ethtool_ops = { .get_drvinfo = ipoib_get_drvinfo, .get_tso = ethtool_op_get_tso, .get_coalesce = ipoib_get_coalesce, .set_coalesce = ipoib_set_coalesce, + .get_flags = ethtool_op_get_flags, + .set_flags = ethtool_op_set_flags, + .get_strings = ipoib_get_strings, + .get_sset_count = ipoib_get_sset_count, + .get_ethtool_stats = ipoib_get_ethtool_stats, }; void ipoib_set_ethtool_ops(struct net_device *dev) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index eca8518d79a0..5d50e5261eed 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -288,7 +288,10 @@ static void ipoib_ib_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) if (test_bit(IPOIB_FLAG_CSUM, &priv->flags) && likely(wc->csum_ok)) skb->ip_summed = CHECKSUM_UNNECESSARY; - netif_receive_skb(skb); + if (dev->features & NETIF_F_LRO) + lro_receive_skb(&priv->lro.lro_mgr, skb, NULL); + else + netif_receive_skb(skb); repost: if (unlikely(ipoib_ib_post_receive(dev, wr_id))) @@ -440,6 +443,9 @@ poll_more: } if (done < budget) { + if (dev->features & NETIF_F_LRO) + lro_flush_all(&priv->lro.lro_mgr); + netif_rx_complete(dev, napi); if (unlikely(ib_req_notify_cq(priv->recv_cq, IB_CQ_NEXT_COMP | diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index bfe1dbf99207..fead88f7fb17 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -60,6 +60,15 @@ MODULE_PARM_DESC(send_queue_size, "Number of descriptors in send queue"); module_param_named(recv_queue_size, ipoib_recvq_size, int, 0444); MODULE_PARM_DESC(recv_queue_size, "Number of descriptors in receive queue"); +static int lro; +module_param(lro, bool, 0444); +MODULE_PARM_DESC(lro, "Enable LRO (Large Receive Offload)"); + +static int lro_max_aggr = IPOIB_LRO_MAX_AGGR; +module_param(lro_max_aggr, int, 0644); +MODULE_PARM_DESC(lro_max_aggr, "LRO: Max packets to be aggregated " + "(default = 64)"); + #ifdef CONFIG_INFINIBAND_IPOIB_DEBUG int ipoib_debug_level; @@ -936,6 +945,54 @@ static const struct header_ops ipoib_header_ops = { .create = ipoib_hard_header, }; +static int get_skb_hdr(struct sk_buff *skb, void **iphdr, + void **tcph, u64 *hdr_flags, void *priv) +{ + unsigned int ip_len; + struct iphdr *iph; + + if (unlikely(skb->protocol != htons(ETH_P_IP))) + return -1; + + /* + * In the future we may add an else clause that verifies the + * checksum and allows devices which do not calculate checksum + * to use LRO. + */ + if (unlikely(skb->ip_summed != CHECKSUM_UNNECESSARY)) + return -1; + + /* Check for non-TCP packet */ + skb_reset_network_header(skb); + iph = ip_hdr(skb); + if (iph->protocol != IPPROTO_TCP) + return -1; + + ip_len = ip_hdrlen(skb); + skb_set_transport_header(skb, ip_len); + *tcph = tcp_hdr(skb); + + /* check if IP header and TCP header are complete */ + if (ntohs(iph->tot_len) < ip_len + tcp_hdrlen(skb)) + return -1; + + *hdr_flags = LRO_IPV4 | LRO_TCP; + *iphdr = iph; + + return 0; +} + +static void ipoib_lro_setup(struct ipoib_dev_priv *priv) +{ + priv->lro.lro_mgr.max_aggr = lro_max_aggr; + priv->lro.lro_mgr.max_desc = IPOIB_MAX_LRO_DESCRIPTORS; + priv->lro.lro_mgr.lro_arr = priv->lro.lro_desc; + priv->lro.lro_mgr.get_skb_header = get_skb_hdr; + priv->lro.lro_mgr.features = LRO_F_NAPI; + priv->lro.lro_mgr.dev = priv->dev; + priv->lro.lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY; +} + static void ipoib_setup(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); @@ -975,6 +1032,8 @@ static void ipoib_setup(struct net_device *dev) priv->dev = dev; + ipoib_lro_setup(priv); + spin_lock_init(&priv->lock); spin_lock_init(&priv->tx_lock); @@ -1152,6 +1211,9 @@ static struct net_device *ipoib_add_port(const char *format, priv->dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; } + if (lro) + priv->dev->features |= NETIF_F_LRO; + /* * Set the full membership bit, so that we join the right * broadcast group, etc. -- cgit v1.2.3 From 038919f29682b00ea95506e959210fc72d1aaf64 Mon Sep 17 00:00:00 2001 From: Joachim Fenkes Date: Mon, 14 Jul 2008 23:48:49 -0700 Subject: IB/ehca: Make device table externally visible This gives ehca an autogenerated modalias and therefore enables automatic loading. Signed-off-by: Joachim Fenkes Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ehca/ehca_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index 482103eb6eac..598844d2edc9 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -923,6 +923,7 @@ static struct of_device_id ehca_device_table[] = }, {}, }; +MODULE_DEVICE_TABLE(of, ehca_device_table); static struct of_platform_driver ehca_driver = { .name = "ehca", -- cgit v1.2.3 From ee1e2c82c245a5fb2864e9dbcdaab3390fde3fcc Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Mon, 14 Jul 2008 23:48:49 -0700 Subject: IPoIB: Refresh paths instead of flushing them on SM change events The patch tries to solve the problem of device going down and paths being flushed on an SM change event. The method is to mark the paths as candidates for refresh (by setting the new valid flag to 0), and wait for an ARP probe a new path record query. The solution requires a different and less intrusive handling of SM change event. For that, the second argument of the flush function changes its meaning from a boolean flag to a level. In most cases, SM failover doesn't cause LID change so traffic won't stop. In the rare cases of LID change, the remote host (the one that hadn't changed its LID) will lose connectivity until paths are refreshed. This is no worse than the current state. In fact, preventing the device from going down saves packets that otherwise would be lost. Signed-off-by: Moni Levy Signed-off-by: Moni Shoua Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 17 ++++++++++-- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 42 ++++++++++++++++++---------- drivers/infiniband/ulp/ipoib/ipoib_main.c | 44 +++++++++++++++++++++++++++--- drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 18 ++++++------ 4 files changed, 91 insertions(+), 30 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 2c522572e3c5..bb19587c5eaf 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -54,6 +54,12 @@ /* constants */ +enum ipoib_flush_level { + IPOIB_FLUSH_LIGHT, + IPOIB_FLUSH_NORMAL, + IPOIB_FLUSH_HEAVY +}; + enum { IPOIB_ENCAP_LEN = 4, @@ -284,10 +290,11 @@ struct ipoib_dev_priv { struct delayed_work pkey_poll_task; struct delayed_work mcast_task; - struct work_struct flush_task; + struct work_struct flush_light; + struct work_struct flush_normal; + struct work_struct flush_heavy; struct work_struct restart_task; struct delayed_work ah_reap_task; - struct work_struct pkey_event_task; struct ib_device *ca; u8 port; @@ -369,6 +376,7 @@ struct ipoib_path { struct rb_node rb_node; struct list_head list; + int valid; }; struct ipoib_neigh { @@ -433,11 +441,14 @@ void ipoib_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_ah *address, u32 qpn); void ipoib_reap_ah(struct work_struct *work); +void ipoib_mark_paths_invalid(struct net_device *dev); void ipoib_flush_paths(struct net_device *dev); struct ipoib_dev_priv *ipoib_intf_alloc(const char *format); int ipoib_ib_dev_init(struct net_device *dev, struct ib_device *ca, int port); -void ipoib_ib_dev_flush(struct work_struct *work); +void ipoib_ib_dev_flush_light(struct work_struct *work); +void ipoib_ib_dev_flush_normal(struct work_struct *work); +void ipoib_ib_dev_flush_heavy(struct work_struct *work); void ipoib_pkey_event(struct work_struct *work); void ipoib_ib_dev_cleanup(struct net_device *dev); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 5d50e5261eed..66cafa20c246 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -902,7 +902,8 @@ int ipoib_ib_dev_init(struct net_device *dev, struct ib_device *ca, int port) return 0; } -static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv, int pkey_event) +static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv, + enum ipoib_flush_level level) { struct ipoib_dev_priv *cpriv; struct net_device *dev = priv->dev; @@ -915,7 +916,7 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv, int pkey_event) * the parent is down. */ list_for_each_entry(cpriv, &priv->child_intfs, list) - __ipoib_ib_dev_flush(cpriv, pkey_event); + __ipoib_ib_dev_flush(cpriv, level); mutex_unlock(&priv->vlan_mutex); @@ -929,7 +930,7 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv, int pkey_event) return; } - if (pkey_event) { + if (level == IPOIB_FLUSH_HEAVY) { if (ib_find_pkey(priv->ca, priv->port, priv->pkey, &new_index)) { clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags); ipoib_ib_dev_down(dev, 0); @@ -947,11 +948,15 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv, int pkey_event) priv->pkey_index = new_index; } - ipoib_dbg(priv, "flushing\n"); + if (level == IPOIB_FLUSH_LIGHT) { + ipoib_mark_paths_invalid(dev); + ipoib_mcast_dev_flush(dev); + } - ipoib_ib_dev_down(dev, 0); + if (level >= IPOIB_FLUSH_NORMAL) + ipoib_ib_dev_down(dev, 0); - if (pkey_event) { + if (level == IPOIB_FLUSH_HEAVY) { ipoib_ib_dev_stop(dev, 0); ipoib_ib_dev_open(dev); } @@ -961,27 +966,34 @@ static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv, int pkey_event) * we get here, don't bring it back up if it's not configured up */ if (test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags)) { - ipoib_ib_dev_up(dev); + if (level >= IPOIB_FLUSH_NORMAL) + ipoib_ib_dev_up(dev); ipoib_mcast_restart_task(&priv->restart_task); } } -void ipoib_ib_dev_flush(struct work_struct *work) +void ipoib_ib_dev_flush_light(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = + container_of(work, struct ipoib_dev_priv, flush_light); + + __ipoib_ib_dev_flush(priv, IPOIB_FLUSH_LIGHT); +} + +void ipoib_ib_dev_flush_normal(struct work_struct *work) { struct ipoib_dev_priv *priv = - container_of(work, struct ipoib_dev_priv, flush_task); + container_of(work, struct ipoib_dev_priv, flush_normal); - ipoib_dbg(priv, "Flushing %s\n", priv->dev->name); - __ipoib_ib_dev_flush(priv, 0); + __ipoib_ib_dev_flush(priv, IPOIB_FLUSH_NORMAL); } -void ipoib_pkey_event(struct work_struct *work) +void ipoib_ib_dev_flush_heavy(struct work_struct *work) { struct ipoib_dev_priv *priv = - container_of(work, struct ipoib_dev_priv, pkey_event_task); + container_of(work, struct ipoib_dev_priv, flush_heavy); - ipoib_dbg(priv, "Flushing %s and restarting its QP\n", priv->dev->name); - __ipoib_ib_dev_flush(priv, 1); + __ipoib_ib_dev_flush(priv, IPOIB_FLUSH_HEAVY); } void ipoib_ib_dev_cleanup(struct net_device *dev) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index fead88f7fb17..b3fd7e8333cf 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -357,6 +357,23 @@ void ipoib_path_iter_read(struct ipoib_path_iter *iter, #endif /* CONFIG_INFINIBAND_IPOIB_DEBUG */ +void ipoib_mark_paths_invalid(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + struct ipoib_path *path, *tp; + + spin_lock_irq(&priv->lock); + + list_for_each_entry_safe(path, tp, &priv->path_list, list) { + ipoib_dbg(priv, "mark path LID 0x%04x GID " IPOIB_GID_FMT " invalid\n", + be16_to_cpu(path->pathrec.dlid), + IPOIB_GID_ARG(path->pathrec.dgid)); + path->valid = 0; + } + + spin_unlock_irq(&priv->lock); +} + void ipoib_flush_paths(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); @@ -393,6 +410,7 @@ static void path_rec_completion(int status, struct net_device *dev = path->dev; struct ipoib_dev_priv *priv = netdev_priv(dev); struct ipoib_ah *ah = NULL; + struct ipoib_ah *old_ah; struct ipoib_neigh *neigh, *tn; struct sk_buff_head skqueue; struct sk_buff *skb; @@ -416,6 +434,7 @@ static void path_rec_completion(int status, spin_lock_irqsave(&priv->lock, flags); + old_ah = path->ah; path->ah = ah; if (ah) { @@ -428,6 +447,17 @@ static void path_rec_completion(int status, __skb_queue_tail(&skqueue, skb); list_for_each_entry_safe(neigh, tn, &path->neigh_list, list) { + if (neigh->ah) { + WARN_ON(neigh->ah != old_ah); + /* + * Dropping the ah reference inside + * priv->lock is safe here, because we + * will hold one more reference from + * the original value of path->ah (ie + * old_ah). + */ + ipoib_put_ah(neigh->ah); + } kref_get(&path->ah->ref); neigh->ah = path->ah; memcpy(&neigh->dgid.raw, &path->pathrec.dgid.raw, @@ -450,6 +480,7 @@ static void path_rec_completion(int status, while ((skb = __skb_dequeue(&neigh->queue))) __skb_queue_tail(&skqueue, skb); } + path->valid = 1; } path->query = NULL; @@ -457,6 +488,9 @@ static void path_rec_completion(int status, spin_unlock_irqrestore(&priv->lock, flags); + if (old_ah) + ipoib_put_ah(old_ah); + while ((skb = __skb_dequeue(&skqueue))) { skb->dev = dev; if (dev_queue_xmit(skb)) @@ -630,8 +664,9 @@ static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev, spin_lock(&priv->lock); path = __path_find(dev, phdr->hwaddr + 4); - if (!path) { - path = path_rec_create(dev, phdr->hwaddr + 4); + if (!path || !path->valid) { + if (!path) + path = path_rec_create(dev, phdr->hwaddr + 4); if (path) { /* put pseudoheader back on for next time */ skb_push(skb, sizeof *phdr); @@ -1046,9 +1081,10 @@ static void ipoib_setup(struct net_device *dev) INIT_LIST_HEAD(&priv->multicast_list); INIT_DELAYED_WORK(&priv->pkey_poll_task, ipoib_pkey_poll); - INIT_WORK(&priv->pkey_event_task, ipoib_pkey_event); INIT_DELAYED_WORK(&priv->mcast_task, ipoib_mcast_join_task); - INIT_WORK(&priv->flush_task, ipoib_ib_dev_flush); + INIT_WORK(&priv->flush_light, ipoib_ib_dev_flush_light); + INIT_WORK(&priv->flush_normal, ipoib_ib_dev_flush_normal); + INIT_WORK(&priv->flush_heavy, ipoib_ib_dev_flush_heavy); INIT_WORK(&priv->restart_task, ipoib_mcast_restart_task); INIT_DELAYED_WORK(&priv->ah_reap_task, ipoib_reap_ah); } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index 7b8fa36f509b..96f9aa79cbbe 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -290,15 +290,17 @@ void ipoib_event(struct ib_event_handler *handler, if (record->element.port_num != priv->port) return; - if (record->event == IB_EVENT_PORT_ERR || - record->event == IB_EVENT_PORT_ACTIVE || - record->event == IB_EVENT_LID_CHANGE || - record->event == IB_EVENT_SM_CHANGE || + ipoib_dbg(priv, "Event %d on device %s port %d\n", record->event, + record->device->name, record->element.port_num); + + if (record->event == IB_EVENT_SM_CHANGE || record->event == IB_EVENT_CLIENT_REREGISTER) { - ipoib_dbg(priv, "Port state change event\n"); - queue_work(ipoib_workqueue, &priv->flush_task); + queue_work(ipoib_workqueue, &priv->flush_light); + } else if (record->event == IB_EVENT_PORT_ERR || + record->event == IB_EVENT_PORT_ACTIVE || + record->event == IB_EVENT_LID_CHANGE) { + queue_work(ipoib_workqueue, &priv->flush_normal); } else if (record->event == IB_EVENT_PKEY_CHANGE) { - ipoib_dbg(priv, "P_Key change event on port:%d\n", priv->port); - queue_work(ipoib_workqueue, &priv->pkey_event_task); + queue_work(ipoib_workqueue, &priv->flush_heavy); } } -- cgit v1.2.3 From 1ff66e8c1faee7c2711b84b9c89e1c5fcd767839 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 23:48:49 -0700 Subject: RDMA/nes: Encapsulate logic nes_put_cqp_request() The iw_nes driver repeats the logic if (atomic_dec_and_test(&cqp_request->refcount)) { if (cqp_request->dynamic) { kfree(cqp_request); } else { spin_lock_irqsave(&nesdev->cqp.lock, flags); list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); spin_unlock_irqrestore(&nesdev->cqp.lock, flags); } } over and over. Wrap this up in functions nes_free_cqp_request() and nes_put_cqp_request() to simplify such code. In addition to making the source smaller and more readable, this shrinks the compiled code quite a bit: add/remove: 2/0 grow/shrink: 0/13 up/down: 164/-1692 (-1528) function old new delta nes_free_cqp_request - 147 +147 nes_put_cqp_request - 17 +17 nes_modify_qp 2316 2293 -23 nes_hw_modify_qp 737 657 -80 nes_dereg_mr 945 860 -85 flush_wqes 501 416 -85 nes_manage_apbvt 648 560 -88 nes_reg_mr 1117 1026 -91 nes_cqp_ce_handler 927 769 -158 nes_alloc_mw 1052 884 -168 nes_create_qp 5314 5141 -173 nes_alloc_fmr 2212 2035 -177 nes_destroy_cq 1097 918 -179 nes_create_cq 2787 2598 -189 nes_dealloc_mw 762 566 -196 Signed-off-by: Roland Dreier Acked-by: Faisal Latif --- drivers/infiniband/hw/nes/nes.h | 4 + drivers/infiniband/hw/nes/nes_hw.c | 60 ++--------- drivers/infiniband/hw/nes/nes_utils.c | 24 +++++ drivers/infiniband/hw/nes/nes_verbs.c | 189 ++++++---------------------------- 4 files changed, 66 insertions(+), 211 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h index 61b46e9c7d2d..fe88bec48949 100644 --- a/drivers/infiniband/hw/nes/nes.h +++ b/drivers/infiniband/hw/nes/nes.h @@ -538,6 +538,10 @@ void nes_read_1G_phy_reg(struct nes_device *, u8, u8, u16 *); void nes_write_10G_phy_reg(struct nes_device *, u16, u8, u16, u16); void nes_read_10G_phy_reg(struct nes_device *, u8, u8, u16); struct nes_cqp_request *nes_get_cqp_request(struct nes_device *); +void nes_free_cqp_request(struct nes_device *nesdev, + struct nes_cqp_request *cqp_request); +void nes_put_cqp_request(struct nes_device *nesdev, + struct nes_cqp_request *cqp_request); void nes_post_cqp_request(struct nes_device *, struct nes_cqp_request *, int); int nes_arp_table(struct nes_device *, u32, u8 *, u32); void nes_mh_fix(unsigned long); diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index d3278f111ca7..80e486653ec9 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -2710,39 +2710,11 @@ static void nes_cqp_ce_handler(struct nes_device *nesdev, struct nes_hw_cq *cq) barrier(); cqp_request->request_done = 1; wake_up(&cqp_request->waitq); - if (atomic_dec_and_test(&cqp_request->refcount)) { - nes_debug(NES_DBG_CQP, "CQP request %p (opcode 0x%02X) freed.\n", - cqp_request, - le32_to_cpu(cqp_request->cqp_wqe.wqe_words[NES_CQP_WQE_OPCODE_IDX])&0x3f); - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } - } else if (cqp_request->callback) { - /* Envoke the callback routine */ - cqp_request->cqp_callback(nesdev, cqp_request); - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } + nes_put_cqp_request(nesdev, cqp_request); } else { - nes_debug(NES_DBG_CQP, "CQP request %p (opcode 0x%02X) freed.\n", - cqp_request, - le32_to_cpu(cqp_request->cqp_wqe.wqe_words[NES_CQP_WQE_OPCODE_IDX]) & 0x3f); - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } + if (cqp_request->callback) + cqp_request->cqp_callback(nesdev, cqp_request); + nes_free_cqp_request(nesdev, cqp_request); } } else { wake_up(&nesdev->cqp.waitq); @@ -3149,7 +3121,6 @@ int nes_manage_apbvt(struct nes_vnic *nesvnic, u32 accel_local_port, { struct nes_device *nesdev = nesvnic->nesdev; struct nes_hw_cqp_wqe *cqp_wqe; - unsigned long flags; struct nes_cqp_request *cqp_request; int ret = 0; u16 major_code; @@ -3184,15 +3155,9 @@ int nes_manage_apbvt(struct nes_vnic *nesvnic, u32 accel_local_port, nes_debug(NES_DBG_QP, "Completed, ret=%u, CQP Major:Minor codes = 0x%04X:0x%04X\n", ret, cqp_request->major_code, cqp_request->minor_code); major_code = cqp_request->major_code; - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } + + nes_put_cqp_request(nesdev, cqp_request); + if (!ret) return -ETIME; else if (major_code) @@ -3262,7 +3227,6 @@ void nes_manage_arp_cache(struct net_device *netdev, unsigned char *mac_addr, void flush_wqes(struct nes_device *nesdev, struct nes_qp *nesqp, u32 which_wq, u32 wait_completion) { - unsigned long flags; struct nes_cqp_request *cqp_request; struct nes_hw_cqp_wqe *cqp_wqe; int ret; @@ -3294,14 +3258,6 @@ void flush_wqes(struct nes_device *nesdev, struct nes_qp *nesqp, nes_debug(NES_DBG_QP, "Flush SQ QP WQEs completed, ret=%u," " CQP Major:Minor codes = 0x%04X:0x%04X\n", ret, cqp_request->major_code, cqp_request->minor_code); - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } + nes_put_cqp_request(nesdev, cqp_request); } } diff --git a/drivers/infiniband/hw/nes/nes_utils.c b/drivers/infiniband/hw/nes/nes_utils.c index fe83d1b2b177..8f519c860872 100644 --- a/drivers/infiniband/hw/nes/nes_utils.c +++ b/drivers/infiniband/hw/nes/nes_utils.c @@ -567,6 +567,30 @@ struct nes_cqp_request *nes_get_cqp_request(struct nes_device *nesdev) return cqp_request; } +void nes_free_cqp_request(struct nes_device *nesdev, + struct nes_cqp_request *cqp_request) +{ + unsigned long flags; + + nes_debug(NES_DBG_CQP, "CQP request %p (opcode 0x%02X) freed.\n", + cqp_request, + le32_to_cpu(cqp_request->cqp_wqe.wqe_words[NES_CQP_WQE_OPCODE_IDX]) & 0x3f); + + if (cqp_request->dynamic) { + kfree(cqp_request); + } else { + spin_lock_irqsave(&nesdev->cqp.lock, flags); + list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); + spin_unlock_irqrestore(&nesdev->cqp.lock, flags); + } +} + +void nes_put_cqp_request(struct nes_device *nesdev, + struct nes_cqp_request *cqp_request) +{ + if (atomic_dec_and_test(&cqp_request->refcount)) + nes_free_cqp_request(nesdev, cqp_request); +} /** * nes_post_cqp_request diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index d617da9bd351..464a98a6e119 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -55,7 +55,6 @@ static void nes_unregister_ofa_device(struct nes_ib_device *nesibdev); * nes_alloc_mw */ static struct ib_mw *nes_alloc_mw(struct ib_pd *ibpd) { - unsigned long flags; struct nes_pd *nespd = to_nespd(ibpd); struct nes_vnic *nesvnic = to_nesvnic(ibpd->device); struct nes_device *nesdev = nesvnic->nesdev; @@ -128,15 +127,7 @@ static struct ib_mw *nes_alloc_mw(struct ib_pd *ibpd) { " CQP Major:Minor codes = 0x%04X:0x%04X.\n", stag, ret, cqp_request->major_code, cqp_request->minor_code); if ((!ret) || (cqp_request->major_code)) { - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } + nes_put_cqp_request(nesdev, cqp_request); kfree(nesmr); nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index); if (!ret) { @@ -144,17 +135,8 @@ static struct ib_mw *nes_alloc_mw(struct ib_pd *ibpd) { } else { return ERR_PTR(-ENOMEM); } - } else { - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } } + nes_put_cqp_request(nesdev, cqp_request); nesmr->ibmw.rkey = stag; nesmr->mode = IWNES_MEMREG_TYPE_MW; @@ -178,7 +160,6 @@ static int nes_dealloc_mw(struct ib_mw *ibmw) struct nes_hw_cqp_wqe *cqp_wqe; struct nes_cqp_request *cqp_request; int err = 0; - unsigned long flags; int ret; /* Deallocate the window with the adapter */ @@ -204,32 +185,12 @@ static int nes_dealloc_mw(struct ib_mw *ibmw) nes_debug(NES_DBG_MR, "Deallocate STag completed, wait_event_timeout ret = %u," " CQP Major:Minor codes = 0x%04X:0x%04X.\n", ret, cqp_request->major_code, cqp_request->minor_code); - if ((!ret) || (cqp_request->major_code)) { - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } - if (!ret) { - err = -ETIME; - } else { - err = -EIO; - } - } else { - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } - } + if (!ret) + err = -ETIME; + else if (cqp_request->major_code) + err = -EIO; + + nes_put_cqp_request(nesdev, cqp_request); nes_free_resource(nesadapter, nesadapter->allocated_mrs, (ibmw->rkey & 0x0fffff00) >> 8); @@ -526,29 +487,11 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, stag, ret, cqp_request->major_code, cqp_request->minor_code); if ((!ret) || (cqp_request->major_code)) { - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } + nes_put_cqp_request(nesdev, cqp_request); ret = (!ret) ? -ETIME : -EIO; goto failed_leaf_vpbl_pages_alloc; - } else { - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } } - + nes_put_cqp_request(nesdev, cqp_request); nesfmr->nesmr.ibfmr.lkey = stag; nesfmr->nesmr.ibfmr.rkey = stag; nesfmr->attr = *ibfmr_attr; @@ -1487,15 +1430,7 @@ static struct ib_qp *nes_create_qp(struct ib_pd *ibpd, nesqp->hwqp.qp_id, ret, nesdev->cqp.sq_head, nesdev->cqp.sq_tail, cqp_request->major_code, cqp_request->minor_code); if ((!ret) || (cqp_request->major_code)) { - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } + nes_put_cqp_request(nesdev, cqp_request); nes_free_resource(nesadapter, nesadapter->allocated_qps, qp_num); nes_free_qp_mem(nesdev, nesqp,virt_wqs); kfree(nesqp->allocated_buffer); @@ -1504,18 +1439,10 @@ static struct ib_qp *nes_create_qp(struct ib_pd *ibpd, } else { return ERR_PTR(-EIO); } - } else { - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } } + nes_put_cqp_request(nesdev, cqp_request); + if (ibpd->uobject) { uresp.mmap_sq_db_index = nesqp->mmap_sq_db_index; uresp.actual_sq_size = sq_size; @@ -1827,32 +1754,15 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, nes_debug(NES_DBG_CQ, "Create iWARP CQ%u completed, wait_event_timeout ret = %d.\n", nescq->hw_cq.cq_number, ret); if ((!ret) || (cqp_request->major_code)) { - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } + nes_put_cqp_request(nesdev, cqp_request); if (!context) pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem, nescq->hw_cq.cq_pbase); nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num); kfree(nescq); return ERR_PTR(-EIO); - } else { - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } } + nes_put_cqp_request(nesdev, cqp_request); if (context) { /* free the nespbl */ @@ -1942,37 +1852,18 @@ static int nes_destroy_cq(struct ib_cq *ib_cq) " CQP Major:Minor codes = 0x%04X:0x%04X.\n", nescq->hw_cq.cq_number, ret, cqp_request->major_code, cqp_request->minor_code); - if ((!ret) || (cqp_request->major_code)) { - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } - if (!ret) { - nes_debug(NES_DBG_CQ, "iWARP CQ%u destroy timeout expired\n", + if (!ret) { + nes_debug(NES_DBG_CQ, "iWARP CQ%u destroy timeout expired\n", nescq->hw_cq.cq_number); - ret = -ETIME; - } else { - nes_debug(NES_DBG_CQ, "iWARP CQ%u destroy failed\n", + ret = -ETIME; + } else if (cqp_request->major_code) { + nes_debug(NES_DBG_CQ, "iWARP CQ%u destroy failed\n", nescq->hw_cq.cq_number); - ret = -EIO; - } + ret = -EIO; } else { ret = 0; - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } } + nes_put_cqp_request(nesdev, cqp_request); if (nescq->cq_mem_size) pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, @@ -2105,15 +1996,8 @@ static int nes_reg_mr(struct nes_device *nesdev, struct nes_pd *nespd, " CQP Major:Minor codes = 0x%04X:0x%04X.\n", stag, ret, cqp_request->major_code, cqp_request->minor_code); major_code = cqp_request->major_code; - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } + nes_put_cqp_request(nesdev, cqp_request); + if (!ret) return -ETIME; else if (major_code) @@ -2771,15 +2655,9 @@ static int nes_dereg_mr(struct ib_mr *ib_mr) major_code = cqp_request->major_code; minor_code = cqp_request->minor_code; - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } + + nes_put_cqp_request(nesdev, cqp_request); + if (!ret) { nes_debug(NES_DBG_MR, "Timeout waiting to destroy STag," " ib_mr=%p, rkey = 0x%08X\n", @@ -2904,7 +2782,6 @@ int nes_hw_modify_qp(struct nes_device *nesdev, struct nes_qp *nesqp, /* struct iw_cm_id *cm_id = nesqp->cm_id; */ /* struct iw_cm_event cm_event; */ struct nes_cqp_request *cqp_request; - unsigned long flags; int ret; u16 major_code; @@ -2950,15 +2827,9 @@ int nes_hw_modify_qp(struct nes_device *nesdev, struct nes_qp *nesqp, nesqp->hwqp.qp_id, cqp_request->major_code, cqp_request->minor_code, next_iwarp_state); } - if (atomic_dec_and_test(&cqp_request->refcount)) { - if (cqp_request->dynamic) { - kfree(cqp_request); - } else { - spin_lock_irqsave(&nesdev->cqp.lock, flags); - list_add_tail(&cqp_request->list, &nesdev->cqp_avail_reqs); - spin_unlock_irqrestore(&nesdev->cqp.lock, flags); - } - } + + nes_put_cqp_request(nesdev, cqp_request); + if (!ret) return -ETIME; else if (major_code) -- cgit v1.2.3 From 52c8084b740c42af27d5bfa62cec7079d12fbc2b Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Mon, 14 Jul 2008 23:48:49 -0700 Subject: RDMA/cxgb3: Propagate HW page size capabilities cxgb3 does not currently report the page size capabilities, and incorrectly reports them internally. This version changes the bit-shifting to a static value (per Steve's request). Signed-off-by: Jon Mason Acked-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/cxio_hal.h | 1 + drivers/infiniband/hw/cxgb3/iwch.c | 2 +- drivers/infiniband/hw/cxgb3/iwch_provider.c | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.h b/drivers/infiniband/hw/cxgb3/cxio_hal.h index a9ff32c36211..656fe47bc84f 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.h +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.h @@ -55,6 +55,7 @@ #define T3_MAX_CQ_DEPTH 8192 #define T3_MAX_NUM_STAG (1<<15) #define T3_MAX_MR_SIZE 0x100000000ULL +#define T3_PAGESIZE_MASK 0xffff000 /* 4KB-128MB */ #define T3_STAG_UNSET 0xffffffff diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c index 06086256ca1d..4489c89d6710 100644 --- a/drivers/infiniband/hw/cxgb3/iwch.c +++ b/drivers/infiniband/hw/cxgb3/iwch.c @@ -80,7 +80,7 @@ static void rnic_init(struct iwch_dev *rnicp) rnicp->attr.max_mem_regs = cxio_num_stags(&rnicp->rdev); rnicp->attr.max_phys_buf_entries = T3_MAX_PBL_SIZE; rnicp->attr.max_pds = T3_MAX_NUM_PD - 1; - rnicp->attr.mem_pgsizes_bitmask = 0x7FFF; /* 4KB-128MB */ + rnicp->attr.mem_pgsizes_bitmask = T3_PAGESIZE_MASK; rnicp->attr.max_mr_size = T3_MAX_MR_SIZE; rnicp->attr.can_resize_wq = 0; rnicp->attr.max_rdma_reads_per_qp = 8; diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index 18a6609f5e01..249d99f4a3cb 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1130,6 +1130,7 @@ static int iwch_query_device(struct ib_device *ibdev, props->hw_ver = dev->rdev.t3cdev_p->type; props->fw_ver = fw_vers_string_to_u64(dev); props->device_cap_flags = dev->device_cap_flags; + props->page_size_cap = dev->attr.mem_pgsizes_bitmask; props->vendor_id = (u32)dev->rdev.rnic_info.pdev->vendor; props->vendor_part_id = (u32)dev->rdev.rnic_info.pdev->device; props->max_mr_size = dev->attr.max_mr_size; -- cgit v1.2.3 From 8294f29767c53e97664a27db9974adea8e2ea95b Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 23:48:49 -0700 Subject: RDMA/nes: Get rid of ring_doorbell parameter of nes_post_cqp_request() Every caller of nes_post_cqp_request() passed it NES_CQP_REQUEST_RING_DOORBELL, so just remove that parameter and always ring the doorbell. Signed-off-by: Roland Dreier Acked-by: Faisal Latif --- drivers/infiniband/hw/nes/nes.c | 2 +- drivers/infiniband/hw/nes/nes.h | 5 +---- drivers/infiniband/hw/nes/nes_hw.c | 6 +++--- drivers/infiniband/hw/nes/nes_hw.h | 2 +- drivers/infiniband/hw/nes/nes_utils.c | 9 ++++----- drivers/infiniband/hw/nes/nes_verbs.c | 18 +++++++++--------- 6 files changed, 19 insertions(+), 23 deletions(-) diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c index a4e9269a29bd..d2884e778098 100644 --- a/drivers/infiniband/hw/nes/nes.c +++ b/drivers/infiniband/hw/nes/nes.c @@ -328,7 +328,7 @@ void nes_rem_ref(struct ib_qp *ibqp) set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_ID_IDX, nesqp->hwqp.qp_id); u64temp = (u64)nesqp->nesqp_context_pbase; set_wqe_64bit_value(cqp_wqe->wqe_words, NES_CQP_QP_WQE_CONTEXT_LOW_IDX, u64temp); - nes_post_cqp_request(nesdev, cqp_request, NES_CQP_REQUEST_RING_DOORBELL); + nes_post_cqp_request(nesdev, cqp_request); } } diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h index fe88bec48949..39bd897b40c6 100644 --- a/drivers/infiniband/hw/nes/nes.h +++ b/drivers/infiniband/hw/nes/nes.h @@ -94,9 +94,6 @@ #define MAX_DPC_ITERATIONS 128 -#define NES_CQP_REQUEST_NO_DOORBELL_RING 0 -#define NES_CQP_REQUEST_RING_DOORBELL 1 - #define NES_DRV_OPT_ENABLE_MPA_VER_0 0x00000001 #define NES_DRV_OPT_DISABLE_MPA_CRC 0x00000002 #define NES_DRV_OPT_DISABLE_FIRST_WRITE 0x00000004 @@ -542,7 +539,7 @@ void nes_free_cqp_request(struct nes_device *nesdev, struct nes_cqp_request *cqp_request); void nes_put_cqp_request(struct nes_device *nesdev, struct nes_cqp_request *cqp_request); -void nes_post_cqp_request(struct nes_device *, struct nes_cqp_request *, int); +void nes_post_cqp_request(struct nes_device *, struct nes_cqp_request *); int nes_arp_table(struct nes_device *, u32, u8 *, u32); void nes_mh_fix(unsigned long); void nes_clc(unsigned long); diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 80e486653ec9..902b1375a5d8 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -3147,7 +3147,7 @@ int nes_manage_apbvt(struct nes_vnic *nesvnic, u32 accel_local_port, nes_debug(NES_DBG_QP, "Waiting for CQP completion for APBVT.\n"); atomic_set(&cqp_request->refcount, 2); - nes_post_cqp_request(nesdev, cqp_request, NES_CQP_REQUEST_RING_DOORBELL); + nes_post_cqp_request(nesdev, cqp_request); if (add_port == NES_MANAGE_APBVT_ADD) ret = wait_event_timeout(cqp_request->waitq, (cqp_request->request_done != 0), @@ -3217,7 +3217,7 @@ void nes_manage_arp_cache(struct net_device *netdev, unsigned char *mac_addr, nesdev->cqp.sq_head, nesdev->cqp.sq_tail); atomic_set(&cqp_request->refcount, 1); - nes_post_cqp_request(nesdev, cqp_request, NES_CQP_REQUEST_RING_DOORBELL); + nes_post_cqp_request(nesdev, cqp_request); } @@ -3249,7 +3249,7 @@ void flush_wqes(struct nes_device *nesdev, struct nes_qp *nesqp, cpu_to_le32(NES_CQP_FLUSH_WQES | which_wq); cqp_wqe->wqe_words[NES_CQP_WQE_ID_IDX] = cpu_to_le32(nesqp->hwqp.qp_id); - nes_post_cqp_request(nesdev, cqp_request, NES_CQP_REQUEST_RING_DOORBELL); + nes_post_cqp_request(nesdev, cqp_request); if (wait_completion) { /* Wait for CQP */ diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h index 745bf94f3f07..7b81e0ae0076 100644 --- a/drivers/infiniband/hw/nes/nes_hw.h +++ b/drivers/infiniband/hw/nes/nes_hw.h @@ -1172,7 +1172,7 @@ struct nes_vnic { u32 mcrq_qp_id; struct nes_ucontext *mcrq_ucontext; struct nes_cqp_request* (*get_cqp_request)(struct nes_device *nesdev); - void (*post_cqp_request)(struct nes_device*, struct nes_cqp_request *, int); + void (*post_cqp_request)(struct nes_device*, struct nes_cqp_request *); int (*mcrq_mcast_filter)( struct nes_vnic* nesvnic, __u8* dmi_addr ); struct net_device_stats netstats; /* used to put the netdev on the adapters logical port list */ diff --git a/drivers/infiniband/hw/nes/nes_utils.c b/drivers/infiniband/hw/nes/nes_utils.c index 8f519c860872..fb8cbd71a2ef 100644 --- a/drivers/infiniband/hw/nes/nes_utils.c +++ b/drivers/infiniband/hw/nes/nes_utils.c @@ -596,7 +596,7 @@ void nes_put_cqp_request(struct nes_device *nesdev, * nes_post_cqp_request */ void nes_post_cqp_request(struct nes_device *nesdev, - struct nes_cqp_request *cqp_request, int ring_doorbell) + struct nes_cqp_request *cqp_request) { struct nes_hw_cqp_wqe *cqp_wqe; unsigned long flags; @@ -624,10 +624,9 @@ void nes_post_cqp_request(struct nes_device *nesdev, nesdev->cqp.sq_head, nesdev->cqp.sq_tail, nesdev->cqp.sq_size, cqp_request->waiting, atomic_read(&cqp_request->refcount)); barrier(); - if (ring_doorbell) { - /* Ring doorbell (1 WQEs) */ - nes_write32(nesdev->regs+NES_WQE_ALLOC, 0x01800000 | nesdev->cqp.qp_id); - } + + /* Ring doorbell (1 WQEs) */ + nes_write32(nesdev->regs+NES_WQE_ALLOC, 0x01800000 | nesdev->cqp.qp_id); barrier(); } else { diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 464a98a6e119..e3939d13484e 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -118,7 +118,7 @@ static struct ib_mw *nes_alloc_mw(struct ib_pd *ibpd) { set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_STAG_WQE_STAG_IDX, stag); atomic_set(&cqp_request->refcount, 2); - nes_post_cqp_request(nesdev, cqp_request, NES_CQP_REQUEST_RING_DOORBELL); + nes_post_cqp_request(nesdev, cqp_request); /* Wait for CQP */ ret = wait_event_timeout(cqp_request->waitq, (cqp_request->request_done != 0), @@ -175,7 +175,7 @@ static int nes_dealloc_mw(struct ib_mw *ibmw) set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_STAG_WQE_STAG_IDX, ibmw->rkey); atomic_set(&cqp_request->refcount, 2); - nes_post_cqp_request(nesdev, cqp_request, NES_CQP_REQUEST_RING_DOORBELL); + nes_post_cqp_request(nesdev, cqp_request); /* Wait for CQP */ nes_debug(NES_DBG_MR, "Waiting for deallocate STag 0x%08X to complete.\n", @@ -477,7 +477,7 @@ static struct ib_fmr *nes_alloc_fmr(struct ib_pd *ibpd, (nesfmr->nesmr.pbls_used-1) : nesfmr->nesmr.pbls_used); atomic_set(&cqp_request->refcount, 2); - nes_post_cqp_request(nesdev, cqp_request, NES_CQP_REQUEST_RING_DOORBELL); + nes_post_cqp_request(nesdev, cqp_request); /* Wait for CQP */ ret = wait_event_timeout(cqp_request->waitq, (cqp_request->request_done != 0), @@ -1417,7 +1417,7 @@ static struct ib_qp *nes_create_qp(struct ib_pd *ibpd, set_wqe_64bit_value(cqp_wqe->wqe_words, NES_CQP_QP_WQE_CONTEXT_LOW_IDX, u64temp); atomic_set(&cqp_request->refcount, 2); - nes_post_cqp_request(nesdev, cqp_request, NES_CQP_REQUEST_RING_DOORBELL); + nes_post_cqp_request(nesdev, cqp_request); /* Wait for CQP */ nes_debug(NES_DBG_QP, "Waiting for create iWARP QP%u to complete.\n", @@ -1744,7 +1744,7 @@ static struct ib_cq *nes_create_cq(struct ib_device *ibdev, int entries, cpu_to_le32(((u32)((u64temp) >> 33)) & 0x7FFFFFFF); atomic_set(&cqp_request->refcount, 2); - nes_post_cqp_request(nesdev, cqp_request, NES_CQP_REQUEST_RING_DOORBELL); + nes_post_cqp_request(nesdev, cqp_request); /* Wait for CQP */ nes_debug(NES_DBG_CQ, "Waiting for create iWARP CQ%u to complete.\n", @@ -1841,7 +1841,7 @@ static int nes_destroy_cq(struct ib_cq *ib_cq) (nescq->hw_cq.cq_number | ((u32)PCI_FUNC(nesdev->pcidev->devfn) << 16))); nes_free_resource(nesadapter, nesadapter->allocated_cqs, nescq->hw_cq.cq_number); atomic_set(&cqp_request->refcount, 2); - nes_post_cqp_request(nesdev, cqp_request, NES_CQP_REQUEST_RING_DOORBELL); + nes_post_cqp_request(nesdev, cqp_request); /* Wait for CQP */ nes_debug(NES_DBG_CQ, "Waiting for destroy iWARP CQ%u to complete.\n", @@ -1987,7 +1987,7 @@ static int nes_reg_mr(struct nes_device *nesdev, struct nes_pd *nespd, barrier(); atomic_set(&cqp_request->refcount, 2); - nes_post_cqp_request(nesdev, cqp_request, NES_CQP_REQUEST_RING_DOORBELL); + nes_post_cqp_request(nesdev, cqp_request); /* Wait for CQP */ ret = wait_event_timeout(cqp_request->waitq, (0 != cqp_request->request_done), @@ -2638,7 +2638,7 @@ static int nes_dereg_mr(struct ib_mr *ib_mr) set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_STAG_WQE_STAG_IDX, ib_mr->rkey); atomic_set(&cqp_request->refcount, 2); - nes_post_cqp_request(nesdev, cqp_request, NES_CQP_REQUEST_RING_DOORBELL); + nes_post_cqp_request(nesdev, cqp_request); /* Wait for CQP */ nes_debug(NES_DBG_MR, "Waiting for deallocate STag 0x%08X completed\n", ib_mr->rkey); @@ -2809,7 +2809,7 @@ int nes_hw_modify_qp(struct nes_device *nesdev, struct nes_qp *nesqp, set_wqe_64bit_value(cqp_wqe->wqe_words, NES_CQP_QP_WQE_CONTEXT_LOW_IDX, (u64)nesqp->nesqp_context_pbase); atomic_set(&cqp_request->refcount, 2); - nes_post_cqp_request(nesdev, cqp_request, NES_CQP_REQUEST_RING_DOORBELL); + nes_post_cqp_request(nesdev, cqp_request); /* Wait for CQP */ if (wait_completion) { -- cgit v1.2.3 From 70fe1796a5ebc5f955be39bba5c42eee9eb89e1f Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 14 Jul 2008 23:48:49 -0700 Subject: RDMA/cxgb3: Set rkey field for new memory windows in iwch_alloc_mw() Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/cxgb3/iwch_provider.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index 249d99f4a3cb..c9a3893b38e8 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -748,6 +748,7 @@ static struct ib_mw *iwch_alloc_mw(struct ib_pd *pd) mhp->attr.type = TPT_MW; mhp->attr.stag = stag; mmid = (stag) >> 8; + mhp->ibmw.rkey = stag; insert_handle(rhp, &rhp->mmidr, mhp, mmid); PDBG("%s mmid 0x%x mhp %p stag 0x%x\n", __func__, mmid, mhp, stag); return &(mhp->ibmw); -- cgit v1.2.3 From c03d4731b5b6de45b95a10bf1d510dde423d6757 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 14 Jul 2008 23:48:50 -0700 Subject: IPoIB: Remove unused IPOIB_MCAST_STARTED code The IPOIB_MCAST_STARTED flag is not used at all since commit b3e2749b ("IPoIB: Don't drop multicast sends when they can be queued"), so remove it. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 1 - drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 8 -------- 2 files changed, 9 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index bb19587c5eaf..66a897567ea9 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -89,7 +89,6 @@ enum { IPOIB_FLAG_SUBINTERFACE = 5, IPOIB_MCAST_RUN = 6, IPOIB_STOP_REAPER = 7, - IPOIB_MCAST_STARTED = 8, IPOIB_FLAG_ADMIN_CM = 9, IPOIB_FLAG_UMCAST = 10, IPOIB_FLAG_CSUM = 11, diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 4a6538b9301a..0b7d129161e1 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -592,10 +592,6 @@ int ipoib_mcast_start_thread(struct net_device *dev) queue_delayed_work(ipoib_workqueue, &priv->mcast_task, 0); mutex_unlock(&mcast_mutex); - spin_lock_irq(&priv->lock); - set_bit(IPOIB_MCAST_STARTED, &priv->flags); - spin_unlock_irq(&priv->lock); - return 0; } @@ -605,10 +601,6 @@ int ipoib_mcast_stop_thread(struct net_device *dev, int flush) ipoib_dbg_mcast(priv, "stopping multicast thread\n"); - spin_lock_irq(&priv->lock); - clear_bit(IPOIB_MCAST_STARTED, &priv->flags); - spin_unlock_irq(&priv->lock); - mutex_lock(&mcast_mutex); clear_bit(IPOIB_MCAST_RUN, &priv->flags); cancel_delayed_work(&priv->mcast_task); -- cgit v1.2.3 From 5892eff91ad60ba365ae7f75050ce464036c5396 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 14 Jul 2008 23:48:50 -0700 Subject: IPoIB: Remove priv->mcast_mutex No need for a mutex around calls to ib_attach_mcast/ib_detach_mcast since these operations are synchronized at the HW driver layer. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 1 - drivers/infiniband/ulp/ipoib/ipoib_main.c | 1 - drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 4 ---- 3 files changed, 6 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 66a897567ea9..b8753222c870 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -277,7 +277,6 @@ struct ipoib_dev_priv { unsigned long flags; - struct mutex mcast_mutex; struct mutex vlan_mutex; struct rb_root path_tree; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index b3fd7e8333cf..8be9ea0436e6 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1072,7 +1072,6 @@ static void ipoib_setup(struct net_device *dev) spin_lock_init(&priv->lock); spin_lock_init(&priv->tx_lock); - mutex_init(&priv->mcast_mutex); mutex_init(&priv->vlan_mutex); INIT_LIST_HEAD(&priv->path_list); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index 96f9aa79cbbe..f50ebe0643ef 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -61,9 +61,7 @@ int ipoib_mcast_attach(struct net_device *dev, u16 mlid, union ib_gid *mgid) } /* attach QP to multicast group */ - mutex_lock(&priv->mcast_mutex); ret = ib_attach_mcast(priv->qp, mgid, mlid); - mutex_unlock(&priv->mcast_mutex); if (ret) ipoib_warn(priv, "failed to attach to multicast group, ret = %d\n", ret); @@ -77,9 +75,7 @@ int ipoib_mcast_detach(struct net_device *dev, u16 mlid, union ib_gid *mgid) struct ipoib_dev_priv *priv = netdev_priv(dev); int ret; - mutex_lock(&priv->mcast_mutex); ret = ib_detach_mcast(priv->qp, mgid, mlid); - mutex_unlock(&priv->mcast_mutex); if (ret) ipoib_warn(priv, "ib_detach_mcast failed (result = %d)\n", ret); -- cgit v1.2.3 From d0de13622d5ac658efe7c51521dbdbe0752aa3dd Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 14 Jul 2008 23:48:50 -0700 Subject: IPoIB: Only set Q_Key once: after joining broadcast group The current code will set the Q_Key for any join of a non-sendonly multicast group. The operation involves a modify QP operation, which is fairly heavyweight, and is only really required after the join of the broadcast group. Fix this by adding a parameter to ipoib_mcast_attach() to control when the Q_Key is set. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 2 +- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 4 +++- drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 28 ++++++++++++++------------ 3 files changed, 19 insertions(+), 15 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index b8753222c870..7b46e2d7b3c2 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -485,7 +485,7 @@ void ipoib_path_iter_read(struct ipoib_path_iter *iter, #endif int ipoib_mcast_attach(struct net_device *dev, u16 mlid, - union ib_gid *mgid); + union ib_gid *mgid, int set_qkey); int ipoib_mcast_detach(struct net_device *dev, u16 mlid, union ib_gid *mgid); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 0b7d129161e1..55ebd950bf23 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -186,6 +186,7 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast, struct ipoib_dev_priv *priv = netdev_priv(dev); struct ipoib_ah *ah; int ret; + int set_qkey = 0; mcast->mcmember = *mcmember; @@ -200,6 +201,7 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast, priv->qkey = be32_to_cpu(priv->broadcast->mcmember.qkey); spin_unlock_irq(&priv->lock); priv->tx_wr.wr.ud.remote_qkey = priv->qkey; + set_qkey = 1; } if (!test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags)) { @@ -212,7 +214,7 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast, } ret = ipoib_mcast_attach(dev, be16_to_cpu(mcast->mcmember.mlid), - &mcast->mcmember.mgid); + &mcast->mcmember.mgid, set_qkey); if (ret < 0) { ipoib_warn(priv, "couldn't attach QP to multicast group " IPOIB_GID_FMT "\n", diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index f50ebe0643ef..ba7c8868e6f7 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -33,18 +33,13 @@ #include "ipoib.h" -int ipoib_mcast_attach(struct net_device *dev, u16 mlid, union ib_gid *mgid) +int ipoib_mcast_attach(struct net_device *dev, u16 mlid, union ib_gid *mgid, int set_qkey) { struct ipoib_dev_priv *priv = netdev_priv(dev); - struct ib_qp_attr *qp_attr; + struct ib_qp_attr *qp_attr = NULL; int ret; u16 pkey_index; - ret = -ENOMEM; - qp_attr = kmalloc(sizeof *qp_attr, GFP_KERNEL); - if (!qp_attr) - goto out; - if (ib_find_pkey(priv->ca, priv->port, priv->pkey, &pkey_index)) { clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags); ret = -ENXIO; @@ -52,12 +47,19 @@ int ipoib_mcast_attach(struct net_device *dev, u16 mlid, union ib_gid *mgid) } set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags); - /* set correct QKey for QP */ - qp_attr->qkey = priv->qkey; - ret = ib_modify_qp(priv->qp, qp_attr, IB_QP_QKEY); - if (ret) { - ipoib_warn(priv, "failed to modify QP, ret = %d\n", ret); - goto out; + if (set_qkey) { + ret = -ENOMEM; + qp_attr = kmalloc(sizeof *qp_attr, GFP_KERNEL); + if (!qp_attr) + goto out; + + /* set correct QKey for QP */ + qp_attr->qkey = priv->qkey; + ret = ib_modify_qp(priv->qp, qp_attr, IB_QP_QKEY); + if (ret) { + ipoib_warn(priv, "failed to modify QP, ret = %d\n", ret); + goto out; + } } /* attach QP to multicast group */ -- cgit v1.2.3 From 9eae554c171e086c89ab83da2a2d3c8bf958fcb5 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 23:48:50 -0700 Subject: IPoIB: Get rid of ipoib_mcast_detach() wrapper ipoib_mcast_detach() does nothing except call ib_detach_mcast(), so just use the core API in the one place that does a multicast group detach. add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-105 (-105) function old new delta ipoib_mcast_leave 357 319 -38 ipoib_mcast_detach 67 - -67 Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 2 -- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 6 +++--- drivers/infiniband/ulp/ipoib/ipoib_verbs.c | 12 ------------ 3 files changed, 3 insertions(+), 17 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 7b46e2d7b3c2..a89b9fbe1ef4 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -486,8 +486,6 @@ void ipoib_path_iter_read(struct ipoib_path_iter *iter, int ipoib_mcast_attach(struct net_device *dev, u16 mlid, union ib_gid *mgid, int set_qkey); -int ipoib_mcast_detach(struct net_device *dev, u16 mlid, - union ib_gid *mgid); int ipoib_init_qp(struct net_device *dev); int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 55ebd950bf23..71add7a8d53c 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -627,10 +627,10 @@ static int ipoib_mcast_leave(struct net_device *dev, struct ipoib_mcast *mcast) IPOIB_GID_ARG(mcast->mcmember.mgid)); /* Remove ourselves from the multicast group */ - ret = ipoib_mcast_detach(dev, be16_to_cpu(mcast->mcmember.mlid), - &mcast->mcmember.mgid); + ret = ib_detach_mcast(priv->qp, &mcast->mcmember.mgid, + be16_to_cpu(mcast->mcmember.mlid)); if (ret) - ipoib_warn(priv, "ipoib_mcast_detach failed (result = %d)\n", ret); + ipoib_warn(priv, "ib_detach_mcast failed (result = %d)\n", ret); } return 0; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index ba7c8868e6f7..68325119f740 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -72,18 +72,6 @@ out: return ret; } -int ipoib_mcast_detach(struct net_device *dev, u16 mlid, union ib_gid *mgid) -{ - struct ipoib_dev_priv *priv = netdev_priv(dev); - int ret; - - ret = ib_detach_mcast(priv->qp, mgid, mlid); - if (ret) - ipoib_warn(priv, "ib_detach_mcast failed (result = %d)\n", ret); - - return ret; -} - int ipoib_init_qp(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); -- cgit v1.2.3 From c8c2afe360b7366f586f6bece1109a72ea334876 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 14 Jul 2008 23:48:51 -0700 Subject: IPoIB: Use rtnl lock/unlock when changing device flags Use of this lock is required to synchronize changes to the netdvice's data structs. Also move the call to ipoib_flush_paths() after the modification of the netdevice flags in set_mode(). Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 8 ++++++-- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 5 ++++- 2 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 37bf67b2a26f..b4269139135b 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -1440,7 +1440,9 @@ static ssize_t set_mode(struct device *d, struct device_attribute *attr, ipoib_warn(priv, "enabling connected mode " "will cause multicast packet drops\n"); + rtnl_lock(); dev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO); + rtnl_unlock(); priv->tx_wr.send_flags &= ~IB_SEND_IP_CSUM; ipoib_flush_paths(dev); @@ -1449,14 +1451,16 @@ static ssize_t set_mode(struct device *d, struct device_attribute *attr, if (!strcmp(buf, "datagram\n")) { clear_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags); - dev->mtu = min(priv->mcast_mtu, dev->mtu); - ipoib_flush_paths(dev); + rtnl_lock(); if (test_bit(IPOIB_FLAG_CSUM, &priv->flags)) { dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; if (priv->hca_caps & IB_DEVICE_UD_TSO) dev->features |= NETIF_F_TSO; } + dev->mtu = min(priv->mcast_mtu, dev->mtu); + rtnl_unlock(); + ipoib_flush_paths(dev); return count; } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 71add7a8d53c..be1ed38cdcfd 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -575,8 +575,11 @@ void ipoib_mcast_join_task(struct work_struct *work) priv->mcast_mtu = IPOIB_UD_MTU(ib_mtu_enum_to_int(priv->broadcast->mcmember.mtu)); - if (!ipoib_cm_admin_enabled(dev)) + if (!ipoib_cm_admin_enabled(dev)) { + rtnl_lock(); dev->mtu = min(priv->mcast_mtu, priv->admin_mtu); + rtnl_unlock(); + } ipoib_dbg_mcast(priv, "successfully joined all multicast groups\n"); -- cgit v1.2.3 From bd3606715effbf37df986548c43bbed0842b49d5 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 14 Jul 2008 23:48:51 -0700 Subject: IPoIB: Use dev_set_mtu() to change mtu When the driver sets the MTU of the net device outside of its change_mtu method, it should make use of dev_set_mtu() instead of directly setting the mtu field of struct netdevice. Otherwise functions registered to be called upon MTU change will not get called (this is done through call_netdevice_notifiers() in dev_set_mtu()). Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 +- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index b4269139135b..87f9f3ef3b2d 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -1458,7 +1458,7 @@ static ssize_t set_mode(struct device *d, struct device_attribute *attr, if (priv->hca_caps & IB_DEVICE_UD_TSO) dev->features |= NETIF_F_TSO; } - dev->mtu = min(priv->mcast_mtu, dev->mtu); + dev_set_mtu(dev, min(priv->mcast_mtu, dev->mtu)); rtnl_unlock(); ipoib_flush_paths(dev); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index be1ed38cdcfd..1fcc9a898d81 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -577,7 +577,7 @@ void ipoib_mcast_join_task(struct work_struct *work) if (!ipoib_cm_admin_enabled(dev)) { rtnl_lock(); - dev->mtu = min(priv->mcast_mtu, priv->admin_mtu); + dev_set_mtu(dev, min(priv->mcast_mtu, priv->admin_mtu)); rtnl_unlock(); } -- cgit v1.2.3 From df8666198dd058b9498ebdbc52c61957206d30a5 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Mon, 14 Jul 2008 23:48:52 -0700 Subject: IB/ipath: Use IEEE OUI for vendor_id reported by ibv_query_device() The IB spe. for SubnGet(NodeInfo) and query HCA says that the vendor ID field should be the IEEE OUI assigned to the vendor. The ipath driver was returning the PCI vendor ID instead. This will affect applications which call ibv_query_device(). The old value was 0x001fc1 or 0x001077, the new value is 0x001175. The vendor ID doesn't appear to be exported via /sys so that should reduce possible compatibility issues. I'm only aware of Open MPI as a major application which depends on this change, and they have made necessary adjustments. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier --- drivers/infiniband/hw/ipath/ipath_mad.c | 6 +++--- drivers/infiniband/hw/ipath/ipath_verbs.c | 3 ++- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c index 5f9315d77a43..be4fc9ada8e7 100644 --- a/drivers/infiniband/hw/ipath/ipath_mad.c +++ b/drivers/infiniband/hw/ipath/ipath_mad.c @@ -111,9 +111,9 @@ static int recv_subn_get_nodeinfo(struct ib_smp *smp, nip->revision = cpu_to_be32((majrev << 16) | minrev); nip->local_port_num = port; vendor = dd->ipath_vendorid; - nip->vendor_id[0] = 0; - nip->vendor_id[1] = vendor >> 8; - nip->vendor_id[2] = vendor; + nip->vendor_id[0] = IPATH_SRC_OUI_1; + nip->vendor_id[1] = IPATH_SRC_OUI_2; + nip->vendor_id[2] = IPATH_SRC_OUI_3; return reply(smp); } diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c index 7779165b2c2c..9e23ab0b51a1 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs.c @@ -1497,7 +1497,8 @@ static int ipath_query_device(struct ib_device *ibdev, IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN | IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE; props->page_size_cap = PAGE_SIZE; - props->vendor_id = dev->dd->ipath_vendorid; + props->vendor_id = + IPATH_SRC_OUI_1 << 16 | IPATH_SRC_OUI_2 << 8 | IPATH_SRC_OUI_3; props->vendor_part_id = dev->dd->ipath_deviceid; props->hw_ver = dev->dd->ipath_pcirev; -- cgit v1.2.3 From e112373fd6aa280bd2cbc0d5cc3809115325a1be Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 14 Jul 2008 23:48:52 -0700 Subject: IPoIB/cm: Reduce connected mode TX object size Since IPoIB connected mode does not NETIF_F_SG, we only have one DMA mapping per send, so we don't need a mapping[] array. Define a new struct with a single u64 mapping member and use it for the CM tx_ring. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 7 ++++++- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 12 ++++++------ 2 files changed, 12 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index a89b9fbe1ef4..0281c8fecc90 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -157,6 +157,11 @@ struct ipoib_tx_buf { u64 mapping[MAX_SKB_FRAGS + 1]; }; +struct ipoib_cm_tx_buf { + struct sk_buff *skb; + u64 mapping; +}; + struct ib_cm_id; struct ipoib_cm_data { @@ -215,7 +220,7 @@ struct ipoib_cm_tx { struct net_device *dev; struct ipoib_neigh *neigh; struct ipoib_path *path; - struct ipoib_tx_buf *tx_ring; + struct ipoib_cm_tx_buf *tx_ring; unsigned tx_head; unsigned tx_tail; unsigned long flags; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index 87f9f3ef3b2d..0f2d3045061a 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -703,7 +703,7 @@ static inline int post_send(struct ipoib_dev_priv *priv, void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_tx *tx) { struct ipoib_dev_priv *priv = netdev_priv(dev); - struct ipoib_tx_buf *tx_req; + struct ipoib_cm_tx_buf *tx_req; u64 addr; if (unlikely(skb->len > tx->mtu)) { @@ -734,7 +734,7 @@ void ipoib_cm_send(struct net_device *dev, struct sk_buff *skb, struct ipoib_cm_ return; } - tx_req->mapping[0] = addr; + tx_req->mapping = addr; if (unlikely(post_send(priv, tx, tx->tx_head & (ipoib_sendq_size - 1), addr, skb->len))) { @@ -759,7 +759,7 @@ void ipoib_cm_handle_tx_wc(struct net_device *dev, struct ib_wc *wc) struct ipoib_dev_priv *priv = netdev_priv(dev); struct ipoib_cm_tx *tx = wc->qp->qp_context; unsigned int wr_id = wc->wr_id & ~IPOIB_OP_CM; - struct ipoib_tx_buf *tx_req; + struct ipoib_cm_tx_buf *tx_req; unsigned long flags; ipoib_dbg_data(priv, "cm send completion: id %d, status: %d\n", @@ -773,7 +773,7 @@ void ipoib_cm_handle_tx_wc(struct net_device *dev, struct ib_wc *wc) tx_req = &tx->tx_ring[wr_id]; - ib_dma_unmap_single(priv->ca, tx_req->mapping[0], tx_req->skb->len, DMA_TO_DEVICE); + ib_dma_unmap_single(priv->ca, tx_req->mapping, tx_req->skb->len, DMA_TO_DEVICE); /* FIXME: is this right? Shouldn't we only increment on success? */ ++dev->stats.tx_packets; @@ -1143,7 +1143,7 @@ err_tx: static void ipoib_cm_tx_destroy(struct ipoib_cm_tx *p) { struct ipoib_dev_priv *priv = netdev_priv(p->dev); - struct ipoib_tx_buf *tx_req; + struct ipoib_cm_tx_buf *tx_req; unsigned long flags; unsigned long begin; @@ -1171,7 +1171,7 @@ timeout: while ((int) p->tx_tail - (int) p->tx_head < 0) { tx_req = &p->tx_ring[p->tx_tail & (ipoib_sendq_size - 1)]; - ib_dma_unmap_single(priv->ca, tx_req->mapping[0], tx_req->skb->len, + ib_dma_unmap_single(priv->ca, tx_req->mapping, tx_req->skb->len, DMA_TO_DEVICE); dev_kfree_skb_any(tx_req->skb); ++p->tx_tail; -- cgit v1.2.3 From bc3a290b51aaefc6a6af2d6e6d52ed32387c416c Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 14 Jul 2008 23:48:52 -0700 Subject: IPoIB: Double default RX/TX ring sizes Increase IPoIB ring sizes to twice their original sizes (RX: 128->256, TX: 64->128) to act as a shock absorber for high traffic peaks. With the current settings, we have seen cases that there are many calls to netif_stop_queue(), which causes degradation in throughput. Also, larger receive buffer sizes help IPoIB in CM mode to avoid experiencing RNR NAK conditions due to insufficient receive buffers at the SRQ. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/ulp/ipoib/ipoib.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 0281c8fecc90..b0ffc9abe8c0 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -70,8 +70,8 @@ enum { IPOIB_CM_BUF_SIZE = IPOIB_CM_MTU + IPOIB_ENCAP_LEN, IPOIB_CM_HEAD_SIZE = IPOIB_CM_BUF_SIZE % PAGE_SIZE, IPOIB_CM_RX_SG = ALIGN(IPOIB_CM_BUF_SIZE, PAGE_SIZE) / PAGE_SIZE, - IPOIB_RX_RING_SIZE = 128, - IPOIB_TX_RING_SIZE = 64, + IPOIB_RX_RING_SIZE = 256, + IPOIB_TX_RING_SIZE = 128, IPOIB_MAX_QUEUE_SIZE = 8192, IPOIB_MIN_QUEUE_SIZE = 2, IPOIB_CM_MAX_CONN_QP = 4096, -- cgit v1.2.3 From 4522e08ced48baaf28990e2674e940aae9940310 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 23:48:52 -0700 Subject: IB/mthca: Remove "stop" flag for catastrophic error polling timer Since we use del_timer_sync() anyway, there's no need for an additional flag to tell the timer not to rearm. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_catas.c | 15 ++------------- drivers/infiniband/hw/mthca/mthca_dev.h | 1 - 2 files changed, 2 insertions(+), 14 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_catas.c b/drivers/infiniband/hw/mthca/mthca_catas.c index 40573e48439c..50e2792e60c1 100644 --- a/drivers/infiniband/hw/mthca/mthca_catas.c +++ b/drivers/infiniband/hw/mthca/mthca_catas.c @@ -126,7 +126,6 @@ static void handle_catas(struct mthca_dev *dev) static void poll_catas(unsigned long dev_ptr) { struct mthca_dev *dev = (struct mthca_dev *) dev_ptr; - unsigned long flags; int i; for (i = 0; i < dev->catas_err.size; ++i) @@ -135,13 +134,8 @@ static void poll_catas(unsigned long dev_ptr) return; } - spin_lock_irqsave(&catas_lock, flags); - if (!dev->catas_err.stop) - mod_timer(&dev->catas_err.timer, - jiffies + MTHCA_CATAS_POLL_INTERVAL); - spin_unlock_irqrestore(&catas_lock, flags); - - return; + mod_timer(&dev->catas_err.timer, + jiffies + MTHCA_CATAS_POLL_INTERVAL); } void mthca_start_catas_poll(struct mthca_dev *dev) @@ -149,7 +143,6 @@ void mthca_start_catas_poll(struct mthca_dev *dev) unsigned long addr; init_timer(&dev->catas_err.timer); - dev->catas_err.stop = 0; dev->catas_err.map = NULL; addr = pci_resource_start(dev->pdev, 0) + @@ -180,10 +173,6 @@ void mthca_start_catas_poll(struct mthca_dev *dev) void mthca_stop_catas_poll(struct mthca_dev *dev) { - spin_lock_irq(&catas_lock); - dev->catas_err.stop = 1; - spin_unlock_irq(&catas_lock); - del_timer_sync(&dev->catas_err.timer); if (dev->catas_err.map) { diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h index 2997d8d564ea..ee4d073c889f 100644 --- a/drivers/infiniband/hw/mthca/mthca_dev.h +++ b/drivers/infiniband/hw/mthca/mthca_dev.h @@ -277,7 +277,6 @@ struct mthca_mcg_table { struct mthca_catas_err { u64 addr; u32 __iomem *map; - unsigned long stop; u32 size; struct timer_list timer; struct list_head list; -- cgit v1.2.3 From c036925ac0e940a4e8525b08e89d2c64fe282c51 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 23:48:52 -0700 Subject: IB/mthca: Use round_jiffies() for catastrophic error polling timer Exactly when the catastrophic error polling timer function runs is not important, so use round_jiffies() to save unnecessary wakeups. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_catas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mthca/mthca_catas.c b/drivers/infiniband/hw/mthca/mthca_catas.c index 50e2792e60c1..cc440f90000b 100644 --- a/drivers/infiniband/hw/mthca/mthca_catas.c +++ b/drivers/infiniband/hw/mthca/mthca_catas.c @@ -135,7 +135,7 @@ static void poll_catas(unsigned long dev_ptr) } mod_timer(&dev->catas_err.timer, - jiffies + MTHCA_CATAS_POLL_INTERVAL); + round_jiffies(jiffies + MTHCA_CATAS_POLL_INTERVAL)); } void mthca_start_catas_poll(struct mthca_dev *dev) -- cgit v1.2.3 From aed012279d35e88e29fd55737d8821604433f50a Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 14 Jul 2008 23:48:52 -0700 Subject: IB/mthca: Fix check of max_send_sge for special QPs The MLX transport requires two extra gather entries for sends (one for the header and one for the checksum at the end, as the comment says). However the code checked that max_recv_sge was not too big, instead of checking max_send_sge as it should have. Fix the code to check the correct condition. Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_qp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 77b52b3adcc7..f5081bfde6db 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -1249,10 +1249,10 @@ static int mthca_set_qp_size(struct mthca_dev *dev, struct ib_qp_cap *cap, return -EINVAL; /* - * For MLX transport we need 2 extra S/G entries: + * For MLX transport we need 2 extra send gather entries: * one for the header and one for the checksum at the end */ - if (qp->transport == MLX && cap->max_recv_sge + 2 > dev->limits.max_sg) + if (qp->transport == MLX && cap->max_send_sge + 2 > dev->limits.max_sg) return -EINVAL; if (mthca_is_memfree(dev)) { -- cgit v1.2.3 From 96f15c03532282366364ecfd20f04e49b5d96f3a Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 14 Jul 2008 23:48:53 -0700 Subject: RDMA/core: Add local DMA L_Key support - Change the IB_DEVICE_ZERO_STAG flag to the transport-neutral name IB_DEVICE_LOCAL_DMA_LKEY, which is used by iWARP RNICs to indicate 0 STag support and IB HCAs to indicate reserved L_Key support. - Add a u32 local_dma_lkey member to struct ib_device. Drivers fill this in with the appropriate local DMA L_Key (if they support it). - Fix up the drivers using this flag. Signed-off-by: Steve Wise Signed-off-by: Roland Dreier --- drivers/infiniband/hw/amso1100/c2_rnic.c | 2 +- drivers/infiniband/hw/cxgb3/iwch_provider.c | 6 ++++-- drivers/infiniband/hw/nes/nes_hw.c | 2 +- include/rdma/ib_verbs.h | 3 ++- 4 files changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c index b1441aeb60c2..dd05c4835642 100644 --- a/drivers/infiniband/hw/amso1100/c2_rnic.c +++ b/drivers/infiniband/hw/amso1100/c2_rnic.c @@ -454,7 +454,7 @@ int __devinit c2_rnic_init(struct c2_dev *c2dev) (IB_DEVICE_RESIZE_MAX_WR | IB_DEVICE_CURR_QP_STATE_MOD | IB_DEVICE_SYS_IMAGE_GUID | - IB_DEVICE_ZERO_STAG | + IB_DEVICE_LOCAL_DMA_LKEY | IB_DEVICE_MEM_WINDOW); /* Allocate the qptr_array */ diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index c9a3893b38e8..7ecfd4d638c5 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1325,8 +1325,10 @@ int iwch_register_device(struct iwch_dev *dev) memset(&dev->ibdev.node_guid, 0, sizeof(dev->ibdev.node_guid)); memcpy(&dev->ibdev.node_guid, dev->rdev.t3cdev_p->lldev->dev_addr, 6); dev->ibdev.owner = THIS_MODULE; - dev->device_cap_flags = IB_DEVICE_ZERO_STAG | - IB_DEVICE_MEM_WINDOW; + dev->device_cap_flags = IB_DEVICE_LOCAL_DMA_LKEY | IB_DEVICE_MEM_WINDOW; + + /* cxgb3 supports STag 0. */ + dev->ibdev.local_dma_lkey = 0; if (fw_supports_fastreg(dev)) dev->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS; diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c index 902b1375a5d8..85f26d19a32b 100644 --- a/drivers/infiniband/hw/nes/nes_hw.c +++ b/drivers/infiniband/hw/nes/nes_hw.c @@ -398,7 +398,7 @@ struct nes_adapter *nes_init_adapter(struct nes_device *nesdev, u8 hw_rev) { nesadapter->base_pd = 1; nesadapter->device_cap_flags = - IB_DEVICE_ZERO_STAG | IB_DEVICE_MEM_WINDOW; + IB_DEVICE_LOCAL_DMA_LKEY | IB_DEVICE_MEM_WINDOW; nesadapter->allocated_qps = (unsigned long *)&(((unsigned char *)nesadapter) [(sizeof(struct nes_adapter)+(sizeof(unsigned long)-1))&(~(sizeof(unsigned long)-1))]); diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 07b41e05565a..90b529f7a154 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -91,7 +91,7 @@ enum ib_device_cap_flags { IB_DEVICE_RC_RNR_NAK_GEN = (1<<12), IB_DEVICE_SRQ_RESIZE = (1<<13), IB_DEVICE_N_NOTIFY_CQ = (1<<14), - IB_DEVICE_ZERO_STAG = (1<<15), + IB_DEVICE_LOCAL_DMA_LKEY = (1<<15), IB_DEVICE_RESERVED = (1<<16), /* old SEND_W_INV */ IB_DEVICE_MEM_WINDOW = (1<<17), /* @@ -1149,6 +1149,7 @@ struct ib_device { char node_desc[64]; __be64 node_guid; + u32 local_dma_lkey; u8 node_type; u8 phys_port_cnt; }; -- cgit v1.2.3 From 4ab928f69208d240d3681336f34589e4b151824f Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Mon, 14 Jul 2008 23:48:53 -0700 Subject: RDMA/cxgb3: Fixes for zero STag Handling the zero STag in receive work request requires some extra logic in the driver: - Only set the QP_PRIV bit for kernel mode QPs. - Add a zero STag build function for recv wrs. The uP needs a PBL allocated and passed down in the recv WR so it can construct a HW PBL for the zero STag S/G entries. Note: we need to place a few restrictions on zero STag usage because of this: 1) all SGEs in a recv WR must either be zero STag or not. No mixing. 2) an individual SGE length cannot exceed 128MB for a zero-stag SGE. This should be OK since it's not really practical to allocate such a large chunk of pinned contiguous DMA mapped memory. - Add an optimized non-zero-STag recv wr format for kernel users. This is needed to optimize both zero and non-zero STag cracking in the recv path for kernel users. - Remove the iwch_ prefix from the static build functions. - Bump required FW version. Signed-off-by: Steve Wise --- drivers/infiniband/hw/cxgb3/cxio_hal.c | 12 ++- drivers/infiniband/hw/cxgb3/cxio_wr.h | 13 ++- drivers/infiniband/hw/cxgb3/iwch_provider.c | 4 +- drivers/infiniband/hw/cxgb3/iwch_qp.c | 127 ++++++++++++++++++++++++---- drivers/net/cxgb3/version.h | 2 +- 5 files changed, 131 insertions(+), 27 deletions(-) diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c index 340e4181c761..f6d5747153a5 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_hal.c +++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c @@ -278,7 +278,7 @@ int cxio_create_qp(struct cxio_rdev *rdev_p, u32 kernel_domain, if (!wq->qpid) return -ENOMEM; - wq->rq = kzalloc(depth * sizeof(u64), GFP_KERNEL); + wq->rq = kzalloc(depth * sizeof(struct t3_swrq), GFP_KERNEL); if (!wq->rq) goto err1; @@ -302,6 +302,7 @@ int cxio_create_qp(struct cxio_rdev *rdev_p, u32 kernel_domain, if (!kernel_domain) wq->udb = (u64)rdev_p->rnic_info.udbell_physbase + (wq->qpid << rdev_p->qpshift); + wq->rdev = rdev_p; PDBG("%s qpid 0x%x doorbell 0x%p udb 0x%llx\n", __func__, wq->qpid, wq->doorbell, (unsigned long long) wq->udb); return 0; @@ -1266,13 +1267,16 @@ proc_cqe: wq->sq_rptr = CQE_WRID_SQ_WPTR(*hw_cqe); PDBG("%s completing sq idx %ld\n", __func__, Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2)); - *cookie = (wq->sq + - Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2))->wr_id; + *cookie = wq->sq[Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2)].wr_id; wq->sq_rptr++; } else { PDBG("%s completing rq idx %ld\n", __func__, Q_PTR2IDX(wq->rq_rptr, wq->rq_size_log2)); - *cookie = *(wq->rq + Q_PTR2IDX(wq->rq_rptr, wq->rq_size_log2)); + *cookie = wq->rq[Q_PTR2IDX(wq->rq_rptr, wq->rq_size_log2)].wr_id; + if (wq->rq[Q_PTR2IDX(wq->rq_rptr, wq->rq_size_log2)].pbl_addr) + cxio_hal_pblpool_free(wq->rdev, + wq->rq[Q_PTR2IDX(wq->rq_rptr, + wq->rq_size_log2)].pbl_addr, T3_STAG0_PBL_SIZE); wq->rq_rptr++; } diff --git a/drivers/infiniband/hw/cxgb3/cxio_wr.h b/drivers/infiniband/hw/cxgb3/cxio_wr.h index de760e9f1cc6..04618f7bfbb3 100644 --- a/drivers/infiniband/hw/cxgb3/cxio_wr.h +++ b/drivers/infiniband/hw/cxgb3/cxio_wr.h @@ -39,6 +39,9 @@ #define T3_MAX_SGE 4 #define T3_MAX_INLINE 64 +#define T3_STAG0_PBL_SIZE (2 * T3_MAX_SGE << 3) +#define T3_STAG0_MAX_PBE_LEN (128 * 1024 * 1024) +#define T3_STAG0_PAGE_SHIFT 15 #define Q_EMPTY(rptr,wptr) ((rptr)==(wptr)) #define Q_FULL(rptr,wptr,size_log2) ( (((wptr)-(rptr))>>(size_log2)) && \ @@ -665,6 +668,11 @@ struct t3_swsq { int signaled; }; +struct t3_swrq { + __u64 wr_id; + __u32 pbl_addr; +}; + /* * A T3 WQ implements both the SQ and RQ. */ @@ -681,14 +689,15 @@ struct t3_wq { u32 sq_wptr; /* sq_wptr - sq_rptr == count of */ u32 sq_rptr; /* pending wrs */ u32 sq_size_log2; /* sq size */ - u64 *rq; /* SW RQ (holds consumer wr_ids */ + struct t3_swrq *rq; /* SW RQ (holds consumer wr_ids */ u32 rq_wptr; /* rq_wptr - rq_rptr == count of */ u32 rq_rptr; /* pending wrs */ - u64 *rq_oldest_wr; /* oldest wr on the SW RQ */ + struct t3_swrq *rq_oldest_wr; /* oldest wr on the SW RQ */ u32 rq_size_log2; /* rq size */ u32 rq_addr; /* rq adapter address */ void __iomem *doorbell; /* kernel db */ u64 udb; /* user db if any */ + struct cxio_rdev *rdev; }; struct t3_cq { diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c index 7ecfd4d638c5..b89640aa6e10 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_provider.c +++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c @@ -1007,10 +1007,10 @@ static struct ib_qp *iwch_create_qp(struct ib_pd *pd, qhp->ibqp.qp_num = qhp->wq.qpid; init_timer(&(qhp->timer)); PDBG("%s sq_num_entries %d, rq_num_entries %d " - "qpid 0x%0x qhp %p dma_addr 0x%llx size %d\n", + "qpid 0x%0x qhp %p dma_addr 0x%llx size %d rq_addr 0x%x\n", __func__, qhp->attr.sq_num_entries, qhp->attr.rq_num_entries, qhp->wq.qpid, qhp, (unsigned long long) qhp->wq.dma_addr, - 1 << qhp->wq.size_log2); + 1 << qhp->wq.size_log2, qhp->wq.rq_addr); return &qhp->ibqp; } diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 3b44300a3036..9a3be3a9d5dc 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -33,10 +33,11 @@ #include "iwch.h" #include "iwch_cm.h" #include "cxio_hal.h" +#include "cxio_resource.h" #define NO_SUPPORT -1 -static int iwch_build_rdma_send(union t3_wr *wqe, struct ib_send_wr *wr, +static int build_rdma_send(union t3_wr *wqe, struct ib_send_wr *wr, u8 * flit_cnt) { int i; @@ -81,7 +82,7 @@ static int iwch_build_rdma_send(union t3_wr *wqe, struct ib_send_wr *wr, return 0; } -static int iwch_build_rdma_write(union t3_wr *wqe, struct ib_send_wr *wr, +static int build_rdma_write(union t3_wr *wqe, struct ib_send_wr *wr, u8 *flit_cnt) { int i; @@ -122,7 +123,7 @@ static int iwch_build_rdma_write(union t3_wr *wqe, struct ib_send_wr *wr, return 0; } -static int iwch_build_rdma_read(union t3_wr *wqe, struct ib_send_wr *wr, +static int build_rdma_read(union t3_wr *wqe, struct ib_send_wr *wr, u8 *flit_cnt) { if (wr->num_sge > 1) @@ -143,7 +144,7 @@ static int iwch_build_rdma_read(union t3_wr *wqe, struct ib_send_wr *wr, return 0; } -static int iwch_build_fastreg(union t3_wr *wqe, struct ib_send_wr *wr, +static int build_fastreg(union t3_wr *wqe, struct ib_send_wr *wr, u8 *flit_cnt, int *wr_cnt, struct t3_wq *wq) { int i; @@ -185,7 +186,7 @@ static int iwch_build_fastreg(union t3_wr *wqe, struct ib_send_wr *wr, return 0; } -static int iwch_build_inv_stag(union t3_wr *wqe, struct ib_send_wr *wr, +static int build_inv_stag(union t3_wr *wqe, struct ib_send_wr *wr, u8 *flit_cnt) { wqe->local_inv.stag = cpu_to_be32(wr->ex.invalidate_rkey); @@ -244,23 +245,106 @@ static int iwch_sgl2pbl_map(struct iwch_dev *rhp, struct ib_sge *sg_list, return 0; } -static int iwch_build_rdma_recv(struct iwch_dev *rhp, union t3_wr *wqe, +static int build_rdma_recv(struct iwch_qp *qhp, union t3_wr *wqe, struct ib_recv_wr *wr) { - int i; - if (wr->num_sge > T3_MAX_SGE) - return -EINVAL; + int i, err = 0; + u32 pbl_addr[T3_MAX_SGE]; + u8 page_size[T3_MAX_SGE]; + + err = iwch_sgl2pbl_map(qhp->rhp, wr->sg_list, wr->num_sge, pbl_addr, + page_size); + if (err) + return err; + wqe->recv.pagesz[0] = page_size[0]; + wqe->recv.pagesz[1] = page_size[1]; + wqe->recv.pagesz[2] = page_size[2]; + wqe->recv.pagesz[3] = page_size[3]; wqe->recv.num_sgle = cpu_to_be32(wr->num_sge); for (i = 0; i < wr->num_sge; i++) { wqe->recv.sgl[i].stag = cpu_to_be32(wr->sg_list[i].lkey); wqe->recv.sgl[i].len = cpu_to_be32(wr->sg_list[i].length); + + /* to in the WQE == the offset into the page */ + wqe->recv.sgl[i].to = cpu_to_be64(((u32) wr->sg_list[i].addr) % + (1UL << (12 + page_size[i]))); + + /* pbl_addr is the adapters address in the PBL */ + wqe->recv.pbl_addr[i] = cpu_to_be32(pbl_addr[i]); + } + for (; i < T3_MAX_SGE; i++) { + wqe->recv.sgl[i].stag = 0; + wqe->recv.sgl[i].len = 0; + wqe->recv.sgl[i].to = 0; + wqe->recv.pbl_addr[i] = 0; + } + qhp->wq.rq[Q_PTR2IDX(qhp->wq.rq_wptr, + qhp->wq.rq_size_log2)].wr_id = wr->wr_id; + qhp->wq.rq[Q_PTR2IDX(qhp->wq.rq_wptr, + qhp->wq.rq_size_log2)].pbl_addr = 0; + return 0; +} + +static int build_zero_stag_recv(struct iwch_qp *qhp, union t3_wr *wqe, + struct ib_recv_wr *wr) +{ + int i; + u32 pbl_addr; + u32 pbl_offset; + + + /* + * The T3 HW requires the PBL in the HW recv descriptor to reference + * a PBL entry. So we allocate the max needed PBL memory here and pass + * it to the uP in the recv WR. The uP will build the PBL and setup + * the HW recv descriptor. + */ + pbl_addr = cxio_hal_pblpool_alloc(&qhp->rhp->rdev, T3_STAG0_PBL_SIZE); + if (!pbl_addr) + return -ENOMEM; + + /* + * Compute the 8B aligned offset. + */ + pbl_offset = (pbl_addr - qhp->rhp->rdev.rnic_info.pbl_base) >> 3; + + wqe->recv.num_sgle = cpu_to_be32(wr->num_sge); + + for (i = 0; i < wr->num_sge; i++) { + + /* + * Use a 128MB page size. This and an imposed 128MB + * sge length limit allows us to require only a 2-entry HW + * PBL for each SGE. This restriction is acceptable since + * since it is not possible to allocate 128MB of contiguous + * DMA coherent memory! + */ + if (wr->sg_list[i].length > T3_STAG0_MAX_PBE_LEN) + return -EINVAL; + wqe->recv.pagesz[i] = T3_STAG0_PAGE_SHIFT; + + /* + * T3 restricts a recv to all zero-stag or all non-zero-stag. + */ + if (wr->sg_list[i].lkey != 0) + return -EINVAL; + wqe->recv.sgl[i].stag = 0; + wqe->recv.sgl[i].len = cpu_to_be32(wr->sg_list[i].length); wqe->recv.sgl[i].to = cpu_to_be64(wr->sg_list[i].addr); + wqe->recv.pbl_addr[i] = cpu_to_be32(pbl_offset); + pbl_offset += 2; } for (; i < T3_MAX_SGE; i++) { + wqe->recv.pagesz[i] = 0; wqe->recv.sgl[i].stag = 0; wqe->recv.sgl[i].len = 0; wqe->recv.sgl[i].to = 0; + wqe->recv.pbl_addr[i] = 0; } + qhp->wq.rq[Q_PTR2IDX(qhp->wq.rq_wptr, + qhp->wq.rq_size_log2)].wr_id = wr->wr_id; + qhp->wq.rq[Q_PTR2IDX(qhp->wq.rq_wptr, + qhp->wq.rq_size_log2)].pbl_addr = pbl_addr; return 0; } @@ -312,18 +396,18 @@ int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, if (wr->send_flags & IB_SEND_FENCE) t3_wr_flags |= T3_READ_FENCE_FLAG; t3_wr_opcode = T3_WR_SEND; - err = iwch_build_rdma_send(wqe, wr, &t3_wr_flit_cnt); + err = build_rdma_send(wqe, wr, &t3_wr_flit_cnt); break; case IB_WR_RDMA_WRITE: case IB_WR_RDMA_WRITE_WITH_IMM: t3_wr_opcode = T3_WR_WRITE; - err = iwch_build_rdma_write(wqe, wr, &t3_wr_flit_cnt); + err = build_rdma_write(wqe, wr, &t3_wr_flit_cnt); break; case IB_WR_RDMA_READ: case IB_WR_RDMA_READ_WITH_INV: t3_wr_opcode = T3_WR_READ; t3_wr_flags = 0; /* T3 reads are always signaled */ - err = iwch_build_rdma_read(wqe, wr, &t3_wr_flit_cnt); + err = build_rdma_read(wqe, wr, &t3_wr_flit_cnt); if (err) break; sqp->read_len = wqe->read.local_len; @@ -332,14 +416,14 @@ int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, break; case IB_WR_FAST_REG_MR: t3_wr_opcode = T3_WR_FASTREG; - err = iwch_build_fastreg(wqe, wr, &t3_wr_flit_cnt, + err = build_fastreg(wqe, wr, &t3_wr_flit_cnt, &wr_cnt, &qhp->wq); break; case IB_WR_LOCAL_INV: if (wr->send_flags & IB_SEND_FENCE) t3_wr_flags |= T3_LOCAL_FENCE_FLAG; t3_wr_opcode = T3_WR_INV_STAG; - err = iwch_build_inv_stag(wqe, wr, &t3_wr_flit_cnt); + err = build_inv_stag(wqe, wr, &t3_wr_flit_cnt); break; default: PDBG("%s post of type=%d TBD!\n", __func__, @@ -398,18 +482,24 @@ int iwch_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, return -EINVAL; } while (wr) { + if (wr->num_sge > T3_MAX_SGE) { + err = -EINVAL; + *bad_wr = wr; + break; + } idx = Q_PTR2IDX(qhp->wq.wptr, qhp->wq.size_log2); wqe = (union t3_wr *) (qhp->wq.queue + idx); if (num_wrs) - err = iwch_build_rdma_recv(qhp->rhp, wqe, wr); + if (wr->sg_list[0].lkey) + err = build_rdma_recv(qhp, wqe, wr); + else + err = build_zero_stag_recv(qhp, wqe, wr); else err = -ENOMEM; if (err) { *bad_wr = wr; break; } - qhp->wq.rq[Q_PTR2IDX(qhp->wq.rq_wptr, qhp->wq.rq_size_log2)] = - wr->wr_id; build_fw_riwrh((void *) wqe, T3_WR_RCV, T3_COMPLETION_FLAG, Q_GENBIT(qhp->wq.wptr, qhp->wq.size_log2), 0, sizeof(struct t3_receive_wr) >> 3, T3_SOPEOP); @@ -810,7 +900,8 @@ static int rdma_init(struct iwch_dev *rhp, struct iwch_qp *qhp, init_attr.qp_dma_size = (1UL << qhp->wq.size_log2); init_attr.rqe_count = iwch_rqes_posted(qhp); init_attr.flags = qhp->attr.mpa_attr.initiator ? MPA_INITIATOR : 0; - init_attr.flags |= capable(CAP_NET_BIND_SERVICE) ? PRIV_QP : 0; + if (!qhp->ibqp.uobject) + init_attr.flags |= PRIV_QP; if (peer2peer) { init_attr.rtr_type = RTR_READ; if (init_attr.ord == 0 && qhp->attr.mpa_attr.initiator) diff --git a/drivers/net/cxgb3/version.h b/drivers/net/cxgb3/version.h index a0177fc55e28..29db711303b9 100644 --- a/drivers/net/cxgb3/version.h +++ b/drivers/net/cxgb3/version.h @@ -38,7 +38,7 @@ #define DRV_VERSION "1.0-ko" /* Firmware version */ -#define FW_VERSION_MAJOR 6 +#define FW_VERSION_MAJOR 7 #define FW_VERSION_MINOR 0 #define FW_VERSION_MICRO 0 #endif /* __CHELSIO_VERSION_H */ -- cgit v1.2.3 From 64c5e613b9dd34ef1281ed6d22478609667ae36a Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Mon, 14 Jul 2008 23:48:53 -0700 Subject: RDMA/addr: Keep pointer to netdevice in struct rdma_dev_addr Keep a pointer to the local (src) netdevice in struct rdma_dev_addr, and copy it in as part of rdma_copy_addr(). Use rdma_translate_ip() in cma_new_conn_id() to reduce some code duplication and also make sure the src_dev member gets set. In a high-availability configuration the netdevice pointer can be used by the RDMA CM to align RDMA sessions to use the same links as the IP stack does under fail-over and route change cases. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/core/addr.c | 1 + drivers/infiniband/core/cma.c | 8 +++++--- include/rdma/ib_addr.h | 1 + 3 files changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index e4eb8be3bb0c..09a2bec7fd32 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -105,6 +105,7 @@ int rdma_copy_addr(struct rdma_dev_addr *dev_addr, struct net_device *dev, memcpy(dev_addr->broadcast, dev->broadcast, MAX_ADDR_LEN); if (dst_dev_addr) memcpy(dev_addr->dst_dev_addr, dst_dev_addr, MAX_ADDR_LEN); + dev_addr->src_dev = dev; return 0; } EXPORT_SYMBOL(rdma_copy_addr); diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 44d190f67810..5fb506a41776 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1002,6 +1002,7 @@ static struct rdma_id_private *cma_new_conn_id(struct rdma_cm_id *listen_id, union cma_ip_addr *src, *dst; __be16 port; u8 ip_ver; + int ret; if (cma_get_net_info(ib_event->private_data, listen_id->ps, &ip_ver, &port, &src, &dst)) @@ -1026,10 +1027,11 @@ static struct rdma_id_private *cma_new_conn_id(struct rdma_cm_id *listen_id, if (rt->num_paths == 2) rt->path_rec[1] = *ib_event->param.req_rcvd.alternate_path; - ib_addr_set_sgid(&rt->addr.dev_addr, &rt->path_rec[0].sgid); ib_addr_set_dgid(&rt->addr.dev_addr, &rt->path_rec[0].dgid); - ib_addr_set_pkey(&rt->addr.dev_addr, be16_to_cpu(rt->path_rec[0].pkey)); - rt->addr.dev_addr.dev_type = RDMA_NODE_IB_CA; + ret = rdma_translate_ip(&id->route.addr.src_addr, + &id->route.addr.dev_addr); + if (ret) + goto destroy_id; id_priv = container_of(id, struct rdma_id_private, id); id_priv->state = CMA_CONNECT; diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h index b42bdd000419..483057b2f4b4 100644 --- a/include/rdma/ib_addr.h +++ b/include/rdma/ib_addr.h @@ -61,6 +61,7 @@ struct rdma_dev_addr { unsigned char dst_dev_addr[MAX_ADDR_LEN]; unsigned char broadcast[MAX_ADDR_LEN]; enum rdma_node_type dev_type; + struct net_device *src_dev; }; /** -- cgit v1.2.3 From de910bd92137005b5e1ecaf2ce68053d7d7d5350 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Mon, 14 Jul 2008 23:48:53 -0700 Subject: RDMA/cma: Simplify locking needed for serialization of callbacks The RDMA CM has some logic in place to make sure that callbacks on a given CM ID are delivered to the consumer in a serialized manner. Specifically it has code to protect against a device removal racing with a running callback function. This patch simplifies this logic by using a mutex per ID instead of a wait queue and atomic variable. This means that cma_disable_remove() now is more properly named to cma_disable_callback(), and cma_enable_remove() can now be removed because it just would become a trivial wrapper around mutex_unlock(). Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/core/cma.c | 106 ++++++++++++++++++++---------------------- 1 file changed, 50 insertions(+), 56 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 5fb506a41776..ae11d5cc74d0 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -130,8 +130,7 @@ struct rdma_id_private { struct completion comp; atomic_t refcount; - wait_queue_head_t wait_remove; - atomic_t dev_remove; + struct mutex handler_mutex; int backlog; int timeout_ms; @@ -355,26 +354,15 @@ static void cma_deref_id(struct rdma_id_private *id_priv) complete(&id_priv->comp); } -static int cma_disable_remove(struct rdma_id_private *id_priv, +static int cma_disable_callback(struct rdma_id_private *id_priv, enum cma_state state) { - unsigned long flags; - int ret; - - spin_lock_irqsave(&id_priv->lock, flags); - if (id_priv->state == state) { - atomic_inc(&id_priv->dev_remove); - ret = 0; - } else - ret = -EINVAL; - spin_unlock_irqrestore(&id_priv->lock, flags); - return ret; -} - -static void cma_enable_remove(struct rdma_id_private *id_priv) -{ - if (atomic_dec_and_test(&id_priv->dev_remove)) - wake_up(&id_priv->wait_remove); + mutex_lock(&id_priv->handler_mutex); + if (id_priv->state != state) { + mutex_unlock(&id_priv->handler_mutex); + return -EINVAL; + } + return 0; } static int cma_has_cm_dev(struct rdma_id_private *id_priv) @@ -399,8 +387,7 @@ struct rdma_cm_id *rdma_create_id(rdma_cm_event_handler event_handler, mutex_init(&id_priv->qp_mutex); init_completion(&id_priv->comp); atomic_set(&id_priv->refcount, 1); - init_waitqueue_head(&id_priv->wait_remove); - atomic_set(&id_priv->dev_remove, 0); + mutex_init(&id_priv->handler_mutex); INIT_LIST_HEAD(&id_priv->listen_list); INIT_LIST_HEAD(&id_priv->mc_list); get_random_bytes(&id_priv->seq_num, sizeof id_priv->seq_num); @@ -927,7 +914,7 @@ static int cma_ib_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) struct rdma_cm_event event; int ret = 0; - if (cma_disable_remove(id_priv, CMA_CONNECT)) + if (cma_disable_callback(id_priv, CMA_CONNECT)) return 0; memset(&event, 0, sizeof event); @@ -984,12 +971,12 @@ static int cma_ib_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) /* Destroy the CM ID by returning a non-zero value. */ id_priv->cm_id.ib = NULL; cma_exch(id_priv, CMA_DESTROYING); - cma_enable_remove(id_priv); + mutex_unlock(&id_priv->handler_mutex); rdma_destroy_id(&id_priv->id); return ret; } out: - cma_enable_remove(id_priv); + mutex_unlock(&id_priv->handler_mutex); return ret; } @@ -1101,7 +1088,7 @@ static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) int offset, ret; listen_id = cm_id->context; - if (cma_disable_remove(listen_id, CMA_LISTEN)) + if (cma_disable_callback(listen_id, CMA_LISTEN)) return -ECONNABORTED; memset(&event, 0, sizeof event); @@ -1122,7 +1109,7 @@ static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) goto out; } - atomic_inc(&conn_id->dev_remove); + mutex_lock_nested(&conn_id->handler_mutex, SINGLE_DEPTH_NESTING); mutex_lock(&lock); ret = cma_acquire_dev(conn_id); mutex_unlock(&lock); @@ -1144,7 +1131,7 @@ static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) !cma_is_ud_ps(conn_id->id.ps)) ib_send_cm_mra(cm_id, CMA_CM_MRA_SETTING, NULL, 0); mutex_unlock(&lock); - cma_enable_remove(conn_id); + mutex_unlock(&conn_id->handler_mutex); goto out; } @@ -1153,11 +1140,11 @@ static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event) release_conn_id: cma_exch(conn_id, CMA_DESTROYING); - cma_enable_remove(conn_id); + mutex_unlock(&conn_id->handler_mutex); rdma_destroy_id(&conn_id->id); out: - cma_enable_remove(listen_id); + mutex_unlock(&listen_id->handler_mutex); return ret; } @@ -1223,7 +1210,7 @@ static int cma_iw_handler(struct iw_cm_id *iw_id, struct iw_cm_event *iw_event) struct sockaddr_in *sin; int ret = 0; - if (cma_disable_remove(id_priv, CMA_CONNECT)) + if (cma_disable_callback(id_priv, CMA_CONNECT)) return 0; memset(&event, 0, sizeof event); @@ -1267,12 +1254,12 @@ static int cma_iw_handler(struct iw_cm_id *iw_id, struct iw_cm_event *iw_event) /* Destroy the CM ID by returning a non-zero value. */ id_priv->cm_id.iw = NULL; cma_exch(id_priv, CMA_DESTROYING); - cma_enable_remove(id_priv); + mutex_unlock(&id_priv->handler_mutex); rdma_destroy_id(&id_priv->id); return ret; } - cma_enable_remove(id_priv); + mutex_unlock(&id_priv->handler_mutex); return ret; } @@ -1288,7 +1275,7 @@ static int iw_conn_req_handler(struct iw_cm_id *cm_id, struct ib_device_attr attr; listen_id = cm_id->context; - if (cma_disable_remove(listen_id, CMA_LISTEN)) + if (cma_disable_callback(listen_id, CMA_LISTEN)) return -ECONNABORTED; /* Create a new RDMA id for the new IW CM ID */ @@ -1300,19 +1287,19 @@ static int iw_conn_req_handler(struct iw_cm_id *cm_id, goto out; } conn_id = container_of(new_cm_id, struct rdma_id_private, id); - atomic_inc(&conn_id->dev_remove); + mutex_lock_nested(&conn_id->handler_mutex, SINGLE_DEPTH_NESTING); conn_id->state = CMA_CONNECT; dev = ip_dev_find(&init_net, iw_event->local_addr.sin_addr.s_addr); if (!dev) { ret = -EADDRNOTAVAIL; - cma_enable_remove(conn_id); + mutex_unlock(&conn_id->handler_mutex); rdma_destroy_id(new_cm_id); goto out; } ret = rdma_copy_addr(&conn_id->id.route.addr.dev_addr, dev, NULL); if (ret) { - cma_enable_remove(conn_id); + mutex_unlock(&conn_id->handler_mutex); rdma_destroy_id(new_cm_id); goto out; } @@ -1321,7 +1308,7 @@ static int iw_conn_req_handler(struct iw_cm_id *cm_id, ret = cma_acquire_dev(conn_id); mutex_unlock(&lock); if (ret) { - cma_enable_remove(conn_id); + mutex_unlock(&conn_id->handler_mutex); rdma_destroy_id(new_cm_id); goto out; } @@ -1337,7 +1324,7 @@ static int iw_conn_req_handler(struct iw_cm_id *cm_id, ret = ib_query_device(conn_id->id.device, &attr); if (ret) { - cma_enable_remove(conn_id); + mutex_unlock(&conn_id->handler_mutex); rdma_destroy_id(new_cm_id); goto out; } @@ -1353,14 +1340,17 @@ static int iw_conn_req_handler(struct iw_cm_id *cm_id, /* User wants to destroy the CM ID */ conn_id->cm_id.iw = NULL; cma_exch(conn_id, CMA_DESTROYING); - cma_enable_remove(conn_id); + mutex_unlock(&conn_id->handler_mutex); rdma_destroy_id(&conn_id->id); + goto out; } + mutex_unlock(&conn_id->handler_mutex); + out: if (dev) dev_put(dev); - cma_enable_remove(listen_id); + mutex_unlock(&listen_id->handler_mutex); return ret; } @@ -1592,7 +1582,7 @@ static void cma_work_handler(struct work_struct *_work) struct rdma_id_private *id_priv = work->id; int destroy = 0; - atomic_inc(&id_priv->dev_remove); + mutex_lock(&id_priv->handler_mutex); if (!cma_comp_exch(id_priv, work->old_state, work->new_state)) goto out; @@ -1601,7 +1591,7 @@ static void cma_work_handler(struct work_struct *_work) destroy = 1; } out: - cma_enable_remove(id_priv); + mutex_unlock(&id_priv->handler_mutex); cma_deref_id(id_priv); if (destroy) rdma_destroy_id(&id_priv->id); @@ -1764,7 +1754,7 @@ static void addr_handler(int status, struct sockaddr *src_addr, struct rdma_cm_event event; memset(&event, 0, sizeof event); - atomic_inc(&id_priv->dev_remove); + mutex_lock(&id_priv->handler_mutex); /* * Grab mutex to block rdma_destroy_id() from removing the device while @@ -1793,13 +1783,13 @@ static void addr_handler(int status, struct sockaddr *src_addr, if (id_priv->id.event_handler(&id_priv->id, &event)) { cma_exch(id_priv, CMA_DESTROYING); - cma_enable_remove(id_priv); + mutex_unlock(&id_priv->handler_mutex); cma_deref_id(id_priv); rdma_destroy_id(&id_priv->id); return; } out: - cma_enable_remove(id_priv); + mutex_unlock(&id_priv->handler_mutex); cma_deref_id(id_priv); } @@ -2126,7 +2116,7 @@ static int cma_sidr_rep_handler(struct ib_cm_id *cm_id, struct ib_cm_sidr_rep_event_param *rep = &ib_event->param.sidr_rep_rcvd; int ret = 0; - if (cma_disable_remove(id_priv, CMA_CONNECT)) + if (cma_disable_callback(id_priv, CMA_CONNECT)) return 0; memset(&event, 0, sizeof event); @@ -2167,12 +2157,12 @@ static int cma_sidr_rep_handler(struct ib_cm_id *cm_id, /* Destroy the CM ID by returning a non-zero value. */ id_priv->cm_id.ib = NULL; cma_exch(id_priv, CMA_DESTROYING); - cma_enable_remove(id_priv); + mutex_unlock(&id_priv->handler_mutex); rdma_destroy_id(&id_priv->id); return ret; } out: - cma_enable_remove(id_priv); + mutex_unlock(&id_priv->handler_mutex); return ret; } @@ -2570,8 +2560,8 @@ static int cma_ib_mc_handler(int status, struct ib_sa_multicast *multicast) int ret; id_priv = mc->id_priv; - if (cma_disable_remove(id_priv, CMA_ADDR_BOUND) && - cma_disable_remove(id_priv, CMA_ADDR_RESOLVED)) + if (cma_disable_callback(id_priv, CMA_ADDR_BOUND) && + cma_disable_callback(id_priv, CMA_ADDR_RESOLVED)) return 0; mutex_lock(&id_priv->qp_mutex); @@ -2596,12 +2586,12 @@ static int cma_ib_mc_handler(int status, struct ib_sa_multicast *multicast) ret = id_priv->id.event_handler(&id_priv->id, &event); if (ret) { cma_exch(id_priv, CMA_DESTROYING); - cma_enable_remove(id_priv); + mutex_unlock(&id_priv->handler_mutex); rdma_destroy_id(&id_priv->id); return 0; } - cma_enable_remove(id_priv); + mutex_unlock(&id_priv->handler_mutex); return 0; } @@ -2760,6 +2750,7 @@ static int cma_remove_id_dev(struct rdma_id_private *id_priv) { struct rdma_cm_event event; enum cma_state state; + int ret = 0; /* Record that we want to remove the device */ state = cma_exch(id_priv, CMA_DEVICE_REMOVAL); @@ -2767,15 +2758,18 @@ static int cma_remove_id_dev(struct rdma_id_private *id_priv) return 0; cma_cancel_operation(id_priv, state); - wait_event(id_priv->wait_remove, !atomic_read(&id_priv->dev_remove)); + mutex_lock(&id_priv->handler_mutex); /* Check for destruction from another callback. */ if (!cma_comp(id_priv, CMA_DEVICE_REMOVAL)) - return 0; + goto out; memset(&event, 0, sizeof event); event.event = RDMA_CM_EVENT_DEVICE_REMOVAL; - return id_priv->id.event_handler(&id_priv->id, &event); + ret = id_priv->id.event_handler(&id_priv->id, &event); +out: + mutex_unlock(&id_priv->handler_mutex); + return ret; } static void cma_process_remove(struct cma_device *cma_dev) -- cgit v1.2.3 From 2d92865158d0e21ef4350703af64bc2a610d81d3 Mon Sep 17 00:00:00 2001 From: Vladimir Sokolovsky Date: Mon, 14 Jul 2008 23:48:53 -0700 Subject: mlx4_core: Use MOD_STAT_CFG command to get minimal page size There was a bug in some versions of the mlx4 driver in mlx4_alloc_fmr(), which hardcoded the minimum acceptable page_shift to be 12. However, new ConnectX firmware can support a minimum page_shift of 9 (log_pg_sz of 9 returned by QUERY_DEV_LIM) -- so with old drivers, ib_fmr_alloc() would fail for ULPs using the device minimum when creating FMRs. To preserve firmware compatibility with released mlx4 drivers, the firmware will continue to return 12 as before for log_page_sz in QUERY_DEV_CAP for these drivers. However, to enable new drivers to take advantage of the available smaller page size, the mlx4 driver now first sets the log_pg_sz to the device minimum by setting a log_page_sz value to 0 via the MOD_STAT_CFG command and then reading the real minimum via QUERY_DEV_CAP. Signed-off-by: Jack Morgenstein Signed-off-by: Vladimir Sokolovsky Signed-off-by: Roland Dreier --- drivers/net/mlx4/fw.c | 28 ++++++++++++++++++++++++++++ drivers/net/mlx4/fw.h | 6 ++++++ drivers/net/mlx4/main.c | 7 +++++++ 3 files changed, 41 insertions(+) diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c index d82f2751d2c7..2b5006b9be67 100644 --- a/drivers/net/mlx4/fw.c +++ b/drivers/net/mlx4/fw.c @@ -101,6 +101,34 @@ static void dump_dev_cap_flags(struct mlx4_dev *dev, u32 flags) mlx4_dbg(dev, " %s\n", fname[i]); } +int mlx4_MOD_STAT_CFG(struct mlx4_dev *dev, struct mlx4_mod_stat_cfg *cfg) +{ + struct mlx4_cmd_mailbox *mailbox; + u32 *inbox; + int err = 0; + +#define MOD_STAT_CFG_IN_SIZE 0x100 + +#define MOD_STAT_CFG_PG_SZ_M_OFFSET 0x002 +#define MOD_STAT_CFG_PG_SZ_OFFSET 0x003 + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + inbox = mailbox->buf; + + memset(inbox, 0, MOD_STAT_CFG_IN_SIZE); + + MLX4_PUT(inbox, cfg->log_pg_sz, MOD_STAT_CFG_PG_SZ_OFFSET); + MLX4_PUT(inbox, cfg->log_pg_sz_m, MOD_STAT_CFG_PG_SZ_M_OFFSET); + + err = mlx4_cmd(dev, mailbox->dma, 0, 0, MLX4_CMD_MOD_STAT_CFG, + MLX4_CMD_TIME_CLASS_A); + + mlx4_free_cmd_mailbox(dev, mailbox); + return err; +} + int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) { struct mlx4_cmd_mailbox *mailbox; diff --git a/drivers/net/mlx4/fw.h b/drivers/net/mlx4/fw.h index 306cb9b0242d..a0e046c149b7 100644 --- a/drivers/net/mlx4/fw.h +++ b/drivers/net/mlx4/fw.h @@ -38,6 +38,11 @@ #include "mlx4.h" #include "icm.h" +struct mlx4_mod_stat_cfg { + u8 log_pg_sz; + u8 log_pg_sz_m; +}; + struct mlx4_dev_cap { int max_srq_sz; int max_qp_sz; @@ -162,5 +167,6 @@ int mlx4_SET_ICM_SIZE(struct mlx4_dev *dev, u64 icm_size, u64 *aux_pages); int mlx4_MAP_ICM_AUX(struct mlx4_dev *dev, struct mlx4_icm *icm); int mlx4_UNMAP_ICM_AUX(struct mlx4_dev *dev); int mlx4_NOP(struct mlx4_dev *dev); +int mlx4_MOD_STAT_CFG(struct mlx4_dev *dev, struct mlx4_mod_stat_cfg *cfg); #endif /* MLX4_FW_H */ diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index a6aa49fc1d68..d3736013fe9b 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -485,6 +485,7 @@ static int mlx4_init_hca(struct mlx4_dev *dev) struct mlx4_priv *priv = mlx4_priv(dev); struct mlx4_adapter adapter; struct mlx4_dev_cap dev_cap; + struct mlx4_mod_stat_cfg mlx4_cfg; struct mlx4_profile profile; struct mlx4_init_hca_param init_hca; u64 icm_size; @@ -502,6 +503,12 @@ static int mlx4_init_hca(struct mlx4_dev *dev) return err; } + mlx4_cfg.log_pg_sz_m = 1; + mlx4_cfg.log_pg_sz = 0; + err = mlx4_MOD_STAT_CFG(dev, &mlx4_cfg); + if (err) + mlx4_warn(dev, "Failed to override log_pg_sz parameter\n"); + err = mlx4_dev_cap(dev, &dev_cap); if (err) { mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n"); -- cgit v1.2.3 From f507d28bff0601f1a8a96b7939fa3855c50d25b6 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 14 Jul 2008 23:48:53 -0700 Subject: IB/mlx4: Use kzalloc() for new QPs so flags are initialized to 0 Current code uses kmalloc() and then just does a bitwise OR operation on qp->flags in create_qp_common(), which means that qp->flags may potentially have some unintended bits set. This patch uses kzalloc() and avoids further explicit clearing of structure members, which also shrinks the code: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-65 (-65) function old new delta create_qp_common 2024 1959 -65 Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/qp.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 91590e7fba0c..89eb6cbe592e 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -454,19 +454,8 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, spin_lock_init(&qp->rq.lock); qp->state = IB_QPS_RESET; - qp->atomic_rd_en = 0; - qp->resp_depth = 0; - - qp->rq.head = 0; - qp->rq.tail = 0; - qp->sq.head = 0; - qp->sq.tail = 0; - qp->sq_next_wqe = 0; - if (init_attr->sq_sig_type == IB_SIGNAL_ALL_WR) qp->sq_signal_bits = cpu_to_be32(MLX4_WQE_CTRL_CQ_UPDATE); - else - qp->sq_signal_bits = 0; err = set_rq_size(dev, &init_attr->cap, !!pd->uobject, !!init_attr->srq, qp); if (err) @@ -704,7 +693,7 @@ struct ib_qp *mlx4_ib_create_qp(struct ib_pd *pd, case IB_QPT_UC: case IB_QPT_UD: { - qp = kmalloc(sizeof *qp, GFP_KERNEL); + qp = kzalloc(sizeof *qp, GFP_KERNEL); if (!qp) return ERR_PTR(-ENOMEM); @@ -725,7 +714,7 @@ struct ib_qp *mlx4_ib_create_qp(struct ib_pd *pd, if (pd->uobject) return ERR_PTR(-EINVAL); - sqp = kmalloc(sizeof *sqp, GFP_KERNEL); + sqp = kzalloc(sizeof *sqp, GFP_KERNEL); if (!sqp) return ERR_PTR(-ENOMEM); -- cgit v1.2.3 From 089be43e403a78cd6889cde2fba164fefe9dfd89 Mon Sep 17 00:00:00 2001 From: James Morris Date: Tue, 15 Jul 2008 18:32:49 +1000 Subject: Revert "SELinux: allow fstype unknown to policy to use xattrs if present" This reverts commit 811f3799279e567aa354c649ce22688d949ac7a9. From Eric Paris: "Please drop this patch for now. It deadlocks on ntfs-3g. I need to rework it to handle fuse filesystems better. (casey was right)" --- security/selinux/hooks.c | 22 +++++----------------- security/selinux/include/security.h | 2 +- security/selinux/ss/services.c | 27 ++++++++------------------- 3 files changed, 14 insertions(+), 37 deletions(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 91200feb3f9c..63f131fc42e4 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -555,15 +555,13 @@ static int selinux_set_mnt_opts(struct super_block *sb, struct task_security_struct *tsec = current->security; struct superblock_security_struct *sbsec = sb->s_security; const char *name = sb->s_type->name; - struct dentry *root = sb->s_root; - struct inode *root_inode = root->d_inode; - struct inode_security_struct *root_isec = root_inode->i_security; + struct inode *inode = sbsec->sb->s_root->d_inode; + struct inode_security_struct *root_isec = inode->i_security; u32 fscontext_sid = 0, context_sid = 0, rootcontext_sid = 0; u32 defcontext_sid = 0; char **mount_options = opts->mnt_opts; int *flags = opts->mnt_opts_flags; int num_opts = opts->num_mnt_opts; - bool can_xattr = false; mutex_lock(&sbsec->lock); @@ -667,24 +665,14 @@ static int selinux_set_mnt_opts(struct super_block *sb, goto out; } - if (strcmp(name, "proc") == 0) + if (strcmp(sb->s_type->name, "proc") == 0) sbsec->proc = 1; - /* - * test if the fs supports xattrs, fs_use might make use of this if the - * fs has no definition in policy. - */ - if (root_inode->i_op->getxattr) { - rc = root_inode->i_op->getxattr(root, XATTR_NAME_SELINUX, NULL, 0); - if (rc >= 0 || rc == -ENODATA) - can_xattr = true; - } - /* Determine the labeling behavior to use for this filesystem type. */ - rc = security_fs_use(name, &sbsec->behavior, &sbsec->sid, can_xattr); + rc = security_fs_use(sb->s_type->name, &sbsec->behavior, &sbsec->sid); if (rc) { printk(KERN_WARNING "%s: security_fs_use(%s) returned %d\n", - __func__, name, rc); + __func__, sb->s_type->name, rc); goto out; } diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h index 44cba2e21dcf..7c543003d653 100644 --- a/security/selinux/include/security.h +++ b/security/selinux/include/security.h @@ -136,7 +136,7 @@ int security_get_allow_unknown(void); #define SECURITY_FS_USE_MNTPOINT 6 /* use mountpoint labeling */ int security_fs_use(const char *fstype, unsigned int *behavior, - u32 *sid, bool can_xattr); + u32 *sid); int security_genfs_sid(const char *fstype, char *name, u16 sclass, u32 *sid); diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index 8e42da120101..b52f923ce680 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -1934,8 +1934,7 @@ out: int security_fs_use( const char *fstype, unsigned int *behavior, - u32 *sid, - bool can_xattr) + u32 *sid) { int rc = 0; struct ocontext *c; @@ -1949,7 +1948,6 @@ int security_fs_use( c = c->next; } - /* look for labeling behavior defined in policy */ if (c) { *behavior = c->v.behavior; if (!c->sid[0]) { @@ -1960,23 +1958,14 @@ int security_fs_use( goto out; } *sid = c->sid[0]; - goto out; - } - - /* labeling behavior not in policy, use xattrs if possible */ - if (can_xattr) { - *behavior = SECURITY_FS_USE_XATTR; - *sid = SECINITSID_FS; - goto out; - } - - /* no behavior in policy and can't use xattrs, try GENFS */ - rc = security_genfs_sid(fstype, "/", SECCLASS_DIR, sid); - if (rc) { - *behavior = SECURITY_FS_USE_NONE; - rc = 0; } else { - *behavior = SECURITY_FS_USE_GENFS; + rc = security_genfs_sid(fstype, "/", SECCLASS_DIR, sid); + if (rc) { + *behavior = SECURITY_FS_USE_NONE; + rc = 0; + } else { + *behavior = SECURITY_FS_USE_GENFS; + } } out: -- cgit v1.2.3 From c9b74c5b8fb807187f6b1db09012828fcd2d7e73 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Fri, 18 Apr 2008 20:41:49 +0200 Subject: sdhci: don't check block count for progress The specification is insufficiently strict when it comes to how the hardware should update the block count register, making it useless for checking transfer progress. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index b413aa6c246b..9b06c6042d97 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -567,7 +567,6 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, static void sdhci_finish_data(struct sdhci_host *host) { struct mmc_data *data; - u16 blocks; BUG_ON(!host->data); @@ -580,20 +579,16 @@ static void sdhci_finish_data(struct sdhci_host *host) } /* - * Controller doesn't count down when in single block mode. + * The specification states that the block count register must + * be updated, but it does not specify at what point in the + * data flow. That makes the register entirely useless to read + * back so we have to assume that nothing made it to the card + * in the event of an error. */ - if (data->blocks == 1) - blocks = (data->error == 0) ? 0 : 1; + if (data->error) + data->bytes_xfered = 0; else - blocks = readw(host->ioaddr + SDHCI_BLOCK_COUNT); - data->bytes_xfered = data->blksz * (data->blocks - blocks); - - if (!data->error && blocks) { - printk(KERN_ERR "%s: Controller signalled completion even " - "though there were blocks left.\n", - mmc_hostname(host->mmc)); - data->error = -EIO; - } + data->bytes_xfered = data->blksz * data->blocks; if (data->stop) { /* @@ -1466,7 +1461,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) mmc->ops = &sdhci_ops; mmc->f_min = host->max_clk / 256; mmc->f_max = host->max_clk; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_SDIO_IRQ; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; if (caps & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED; -- cgit v1.2.3 From b8c86fc5d8deaa5a6dc49c2c1ed144e6838bf0f3 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Tue, 18 Mar 2008 17:35:49 +0100 Subject: sdhci: move pci stuff to separate module The SDHCI interface is not PCI specific, yet the Linux driver was intimitely connected to the PCI bus. This patch properly separates the PCI specific portion from the bus independent code. This patch is based on work by Ben Dooks but he did not have time to complete it. Signed-off-by: Pierre Ossman --- drivers/mmc/host/Kconfig | 19 +- drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci-pci.c | 486 +++++++++++++++++++++++++++++++++++++++++ drivers/mmc/host/sdhci.c | 499 ++++++++----------------------------------- drivers/mmc/host/sdhci.h | 82 ++++--- 5 files changed, 651 insertions(+), 436 deletions(-) create mode 100644 drivers/mmc/host/sdhci-pci.c diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index dead61754ad7..f9cbcb891e99 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -26,18 +26,31 @@ config MMC_PXA config MMC_SDHCI tristate "Secure Digital Host Controller Interface support" - depends on PCI + depends on HAS_DMA help - This select the generic Secure Digital Host Controller Interface. + This selects the generic Secure Digital Host Controller Interface. It is used by manufacturers such as Texas Instruments(R), Ricoh(R) and Toshiba(R). Most controllers found in laptops are of this type. + + If you have a controller with this interface, say Y or M here. You + also need to enable an appropriate bus interface. + + If unsure, say N. + +config MMC_SDHCI_PCI + tristate "SDHCI support on PCI bus" + depends on MMC_SDHCI && PCI + help + This selects the PCI Secure Digital Host Controller Interface. + Most controllers found today are PCI devices. + If you have a controller with this interface, say Y or M here. If unsure, say N. config MMC_RICOH_MMC tristate "Ricoh MMC Controller Disabler (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL && MMC_SDHCI + depends on MMC_SDHCI_PCI help This selects the disabler for the Ricoh MMC Controller. This proprietary controller is unnecessary because the SDHCI driver diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 3877c87e6da2..3027250b8555 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_MMC_ARMMMCI) += mmci.o obj-$(CONFIG_MMC_PXA) += pxamci.o obj-$(CONFIG_MMC_IMX) += imxmmc.o obj-$(CONFIG_MMC_SDHCI) += sdhci.o +obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c new file mode 100644 index 000000000000..2a3dd6cc7bf7 --- /dev/null +++ b/drivers/mmc/host/sdhci-pci.c @@ -0,0 +1,486 @@ +/* linux/drivers/mmc/host/sdhci-pci.c - SDHCI on PCI bus interface + * + * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + * + * Thanks to the following companies for their support: + * + * - JMicron (hardware and technical support) + */ + +#include +#include +#include +#include + +#include + +#include +#include + +#include "sdhci.h" + +/* + * PCI registers + */ + +#define PCI_SDHCI_IFPIO 0x00 +#define PCI_SDHCI_IFDMA 0x01 +#define PCI_SDHCI_IFVENDOR 0x02 + +#define PCI_SLOT_INFO 0x40 /* 8 bits */ +#define PCI_SLOT_INFO_SLOTS(x) ((x >> 4) & 7) +#define PCI_SLOT_INFO_FIRST_BAR_MASK 0x07 + +#define MAX_SLOTS 8 + +static const struct pci_device_id pci_ids[] __devinitdata = { + { + .vendor = PCI_VENDOR_ID_RICOH, + .device = PCI_DEVICE_ID_RICOH_R5C822, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_CLOCK_BEFORE_RESET | + SDHCI_QUIRK_FORCE_DMA, + }, + + { + .vendor = PCI_VENDOR_ID_RICOH, + .device = PCI_DEVICE_ID_RICOH_R5C822, + .subvendor = PCI_VENDOR_ID_SAMSUNG, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_FORCE_DMA | + SDHCI_QUIRK_NO_CARD_NO_RESET, + }, + + { + .vendor = PCI_VENDOR_ID_RICOH, + .device = PCI_DEVICE_ID_RICOH_R5C822, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_FORCE_DMA, + }, + + { + .vendor = PCI_VENDOR_ID_TI, + .device = PCI_DEVICE_ID_TI_XX21_XX11_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_FORCE_DMA, + }, + + { + .vendor = PCI_VENDOR_ID_ENE, + .device = PCI_DEVICE_ID_ENE_CB712_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_BROKEN_DMA, + }, + + { + .vendor = PCI_VENDOR_ID_ENE, + .device = PCI_DEVICE_ID_ENE_CB712_SD_2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_BROKEN_DMA, + }, + + { + .vendor = PCI_VENDOR_ID_ENE, + .device = PCI_DEVICE_ID_ENE_CB714_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | + SDHCI_QUIRK_BROKEN_DMA, + }, + + { + .vendor = PCI_VENDOR_ID_ENE, + .device = PCI_DEVICE_ID_ENE_CB714_SD_2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | + SDHCI_QUIRK_BROKEN_DMA, + }, + + { + .vendor = PCI_VENDOR_ID_MARVELL, + .device = PCI_DEVICE_ID_MARVELL_CAFE_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | + SDHCI_QUIRK_INCR_TIMEOUT_CONTROL, + }, + + { + .vendor = PCI_VENDOR_ID_JMICRON, + .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE | + SDHCI_QUIRK_RESET_AFTER_REQUEST, + }, + + { /* Generic SD host controller */ + PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) + }, + + { /* end: all zeroes */ }, +}; + +MODULE_DEVICE_TABLE(pci, pci_ids); + +struct sdhci_pci_chip; + +struct sdhci_pci_slot { + struct sdhci_pci_chip *chip; + struct sdhci_host *host; + + int pci_bar; +}; + +struct sdhci_pci_chip { + struct pci_dev *pdev; + unsigned int quirks; + + int num_slots; /* Slots on controller */ + struct sdhci_pci_slot *slots[MAX_SLOTS]; /* Pointers to host slots */ +}; + +/*****************************************************************************\ + * * + * SDHCI core callbacks * + * * +\*****************************************************************************/ + +static int sdhci_pci_enable_dma(struct sdhci_host *host) +{ + struct sdhci_pci_slot *slot; + struct pci_dev *pdev; + int ret; + + slot = sdhci_priv(host); + pdev = slot->chip->pdev; + + if (((pdev->class & 0xFFFF00) == (PCI_CLASS_SYSTEM_SDHCI << 8)) && + ((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) && + (host->flags & SDHCI_USE_DMA)) { + dev_warn(&pdev->dev, "Will use DMA mode even though HW " + "doesn't fully claim to support it.\n"); + } + + ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (ret) + return ret; + + pci_set_master(pdev); + + return 0; +} + +static struct sdhci_ops sdhci_pci_ops = { + .enable_dma = sdhci_pci_enable_dma, +}; + +/*****************************************************************************\ + * * + * Suspend/resume * + * * +\*****************************************************************************/ + +#ifdef CONFIG_PM + +static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state) +{ + struct sdhci_pci_chip *chip; + struct sdhci_pci_slot *slot; + int i, ret; + + chip = pci_get_drvdata(pdev); + if (!chip) + return 0; + + for (i = 0;i < chip->num_slots;i++) { + slot = chip->slots[i]; + if (!slot) + continue; + + ret = sdhci_suspend_host(slot->host, state); + + if (ret) { + for (i--;i >= 0;i--) + sdhci_resume_host(chip->slots[i]->host); + return ret; + } + } + + pci_save_state(pdev); + pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int sdhci_pci_resume (struct pci_dev *pdev) +{ + struct sdhci_pci_chip *chip; + struct sdhci_pci_slot *slot; + int i, ret; + + chip = pci_get_drvdata(pdev); + if (!chip) + return 0; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + ret = pci_enable_device(pdev); + if (ret) + return ret; + + for (i = 0;i < chip->num_slots;i++) { + slot = chip->slots[i]; + if (!slot) + continue; + + ret = sdhci_resume_host(slot->host); + if (ret) + return ret; + } + + return 0; +} + +#else /* CONFIG_PM */ + +#define sdhci_pci_suspend NULL +#define sdhci_pci_resume NULL + +#endif /* CONFIG_PM */ + +/*****************************************************************************\ + * * + * Device probing/removal * + * * +\*****************************************************************************/ + +static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( + struct pci_dev *pdev, struct sdhci_pci_chip *chip, int bar) +{ + struct sdhci_pci_slot *slot; + struct sdhci_host *host; + + resource_size_t addr; + + int ret; + + if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) { + dev_err(&pdev->dev, "BAR %d is not iomem. Aborting.\n", bar); + return ERR_PTR(-ENODEV); + } + + if (pci_resource_len(pdev, bar) != 0x100) { + dev_err(&pdev->dev, "Invalid iomem size. You may " + "experience problems.\n"); + } + + if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) { + dev_err(&pdev->dev, "Vendor specific interface. Aborting.\n"); + return ERR_PTR(-ENODEV); + } + + if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) { + dev_err(&pdev->dev, "Unknown interface. Aborting.\n"); + return ERR_PTR(-ENODEV); + } + + host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot)); + if (IS_ERR(host)) { + ret = PTR_ERR(host); + goto unmap; + } + + slot = sdhci_priv(host); + + slot->chip = chip; + slot->host = host; + slot->pci_bar = bar; + + host->hw_name = "PCI"; + host->ops = &sdhci_pci_ops; + host->quirks = chip->quirks; + + host->irq = pdev->irq; + + ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc)); + if (ret) { + dev_err(&pdev->dev, "cannot request region\n"); + return ERR_PTR(ret); + } + + addr = pci_resource_start(pdev, bar); + host->ioaddr = ioremap_nocache(addr, pci_resource_len(pdev, bar)); + if (!host->ioaddr) { + dev_err(&pdev->dev, "failed to remap registers\n"); + goto release; + } + + ret = sdhci_add_host(host); + if (ret) + goto unmap; + + return slot; + +unmap: + iounmap(host->ioaddr); + +release: + pci_release_region(pdev, bar); + sdhci_free_host(host); + + return ERR_PTR(ret); +} + +static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot) +{ + sdhci_remove_host(slot->host); + pci_release_region(slot->chip->pdev, slot->pci_bar); + sdhci_free_host(slot->host); +} + +static int __devinit sdhci_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct sdhci_pci_chip *chip; + struct sdhci_pci_slot *slot; + + u8 slots, rev, first_bar; + int ret, i; + + BUG_ON(pdev == NULL); + BUG_ON(ent == NULL); + + pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev); + + dev_info(&pdev->dev, "SDHCI controller found [%04x:%04x] (rev %x)\n", + (int)pdev->vendor, (int)pdev->device, (int)rev); + + ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots); + if (ret) + return ret; + + slots = PCI_SLOT_INFO_SLOTS(slots) + 1; + dev_dbg(&pdev->dev, "found %d slot(s)\n", slots); + if (slots == 0) + return -ENODEV; + + BUG_ON(slots > MAX_SLOTS); + + ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &first_bar); + if (ret) + return ret; + + first_bar &= PCI_SLOT_INFO_FIRST_BAR_MASK; + + if (first_bar > 5) { + dev_err(&pdev->dev, "Invalid first BAR. Aborting.\n"); + return -ENODEV; + } + + ret = pci_enable_device(pdev); + if (ret) + return ret; + + chip = kzalloc(sizeof(struct sdhci_pci_chip), GFP_KERNEL); + if (!chip) { + ret = -ENOMEM; + goto err; + } + + chip->pdev = pdev; + chip->quirks = ent->driver_data; + chip->num_slots = slots; + + pci_set_drvdata(pdev, chip); + + for (i = 0;i < slots;i++) { + slot = sdhci_pci_probe_slot(pdev, chip, first_bar + i); + if (IS_ERR(slot)) { + for (i--;i >= 0;i--) + sdhci_pci_remove_slot(chip->slots[i]); + ret = PTR_ERR(slot); + goto free; + } + + chip->slots[i] = slot; + } + + return 0; + +free: + pci_set_drvdata(pdev, NULL); + kfree(chip); + +err: + pci_disable_device(pdev); + return ret; +} + +static void __devexit sdhci_pci_remove(struct pci_dev *pdev) +{ + int i; + struct sdhci_pci_chip *chip; + + chip = pci_get_drvdata(pdev); + + if (chip) { + for (i = 0;i < chip->num_slots; i++) + sdhci_pci_remove_slot(chip->slots[i]); + + pci_set_drvdata(pdev, NULL); + kfree(chip); + } + + pci_disable_device(pdev); +} + +static struct pci_driver sdhci_driver = { + .name = "sdhci-pci", + .id_table = pci_ids, + .probe = sdhci_pci_probe, + .remove = __devexit_p(sdhci_pci_remove), + .suspend = sdhci_pci_suspend, + .resume = sdhci_pci_resume, +}; + +/*****************************************************************************\ + * * + * Driver init/exit * + * * +\*****************************************************************************/ + +static int __init sdhci_drv_init(void) +{ + return pci_register_driver(&sdhci_driver); +} + +static void __exit sdhci_drv_exit(void) +{ + pci_unregister_driver(&sdhci_driver); +} + +module_init(sdhci_drv_init); +module_exit(sdhci_drv_exit); + +MODULE_AUTHOR("Pierre Ossman "); +MODULE_DESCRIPTION("Secure Digital Host Controller Interface PCI driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 9b06c6042d97..8ce01d434ea8 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -15,7 +15,7 @@ #include #include -#include +#include #include #include @@ -32,135 +32,6 @@ static unsigned int debug_quirks = 0; -/* - * Different quirks to handle when the hardware deviates from a strict - * interpretation of the SDHCI specification. - */ - -/* Controller doesn't honor resets unless we touch the clock register */ -#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) -/* Controller has bad caps bits, but really supports DMA */ -#define SDHCI_QUIRK_FORCE_DMA (1<<1) -/* Controller doesn't like to be reset when there is no card inserted. */ -#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) -/* Controller doesn't like clearing the power reg before a change */ -#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) -/* Controller has flaky internal state so reset it on each ios change */ -#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) -/* Controller has an unusable DMA engine */ -#define SDHCI_QUIRK_BROKEN_DMA (1<<5) -/* Controller can only DMA from 32-bit aligned addresses */ -#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<6) -/* Controller can only DMA chunk sizes that are a multiple of 32 bits */ -#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7) -/* Controller needs to be reset after each request to stay stable */ -#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8) -/* Controller needs voltage and power writes to happen separately */ -#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9) -/* Controller has an off-by-one issue with timeout value */ -#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1<<10) - -static const struct pci_device_id pci_ids[] __devinitdata = { - { - .vendor = PCI_VENDOR_ID_RICOH, - .device = PCI_DEVICE_ID_RICOH_R5C822, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_CLOCK_BEFORE_RESET | - SDHCI_QUIRK_FORCE_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_RICOH, - .device = PCI_DEVICE_ID_RICOH_R5C822, - .subvendor = PCI_VENDOR_ID_SAMSUNG, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_FORCE_DMA | - SDHCI_QUIRK_NO_CARD_NO_RESET, - }, - - { - .vendor = PCI_VENDOR_ID_RICOH, - .device = PCI_DEVICE_ID_RICOH_R5C822, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_FORCE_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_TI, - .device = PCI_DEVICE_ID_TI_XX21_XX11_SD, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_FORCE_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_ENE, - .device = PCI_DEVICE_ID_ENE_CB712_SD, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_BROKEN_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_ENE, - .device = PCI_DEVICE_ID_ENE_CB712_SD_2, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_BROKEN_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_ENE, - .device = PCI_DEVICE_ID_ENE_CB714_SD, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | - SDHCI_QUIRK_BROKEN_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_ENE, - .device = PCI_DEVICE_ID_ENE_CB714_SD_2, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | - SDHCI_QUIRK_BROKEN_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_MARVELL, - .device = PCI_DEVICE_ID_MARVELL_CAFE_SD, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | - SDHCI_QUIRK_INCR_TIMEOUT_CONTROL, - }, - - { - .vendor = PCI_VENDOR_ID_JMICRON, - .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_32BIT_DMA_ADDR | - SDHCI_QUIRK_32BIT_DMA_SIZE | - SDHCI_QUIRK_RESET_AFTER_REQUEST, - }, - - { /* Generic SD host controller */ - PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) - }, - - { /* end: all zeroes */ }, -}; - -MODULE_DEVICE_TABLE(pci, pci_ids); - static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *); static void sdhci_finish_data(struct sdhci_host *); @@ -215,7 +86,7 @@ static void sdhci_reset(struct sdhci_host *host, u8 mask) { unsigned long timeout; - if (host->chip->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) { + if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) { if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) return; @@ -488,7 +359,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) * Compensate for an off-by-one error in the CaFe hardware; otherwise, * a too-small count gives us interrupt timeouts. */ - if ((host->chip->quirks & SDHCI_QUIRK_INCR_TIMEOUT_CONTROL)) + if ((host->quirks & SDHCI_QUIRK_INCR_TIMEOUT_CONTROL)) count++; if (count >= 0xF) { @@ -503,7 +374,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) host->flags |= SDHCI_REQ_USE_DMA; if (unlikely((host->flags & SDHCI_REQ_USE_DMA) && - (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) && + (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) && ((data->blksz * data->blocks) & 0x3))) { DBG("Reverting to PIO because of transfer size (%d)\n", data->blksz * data->blocks); @@ -515,7 +386,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) * translation to device address space. */ if (unlikely((host->flags & SDHCI_REQ_USE_DMA) && - (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && + (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && (data->sg->offset & 0x3))) { DBG("Reverting to PIO because of bad alignment\n"); host->flags &= ~SDHCI_REQ_USE_DMA; @@ -524,11 +395,13 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) if (host->flags & SDHCI_REQ_USE_DMA) { int count; - count = pci_map_sg(host->chip->pdev, data->sg, data->sg_len, - (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE); - BUG_ON(count != 1); + count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + (data->flags & MMC_DATA_READ) ? + DMA_FROM_DEVICE : DMA_TO_DEVICE); + WARN_ON(count != 1); - writel(sg_dma_address(data->sg), host->ioaddr + SDHCI_DMA_ADDRESS); + writel(sg_dma_address(data->sg), + host->ioaddr + SDHCI_DMA_ADDRESS); } else { host->cur_sg = data->sg; host->num_sg = data->sg_len; @@ -574,8 +447,9 @@ static void sdhci_finish_data(struct sdhci_host *host) host->data = NULL; if (host->flags & SDHCI_REQ_USE_DMA) { - pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len, - (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE); + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + (data->flags & MMC_DATA_READ) ? + DMA_FROM_DEVICE : DMA_TO_DEVICE); } /* @@ -770,7 +644,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) * Spec says that we should clear the power reg before setting * a new value. Some controllers don't seem to like this though. */ - if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) + if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE)) writeb(0, host->ioaddr + SDHCI_POWER_CONTROL); pwr = SDHCI_POWER_ON; @@ -795,7 +669,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) * At least the CaFe chip gets confused if we set the voltage * and set turn on power at the same time, so set the voltage first. */ - if ((host->chip->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)) + if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)) writeb(pwr & ~SDHCI_POWER_ON, host->ioaddr + SDHCI_POWER_CONTROL); @@ -883,7 +757,7 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) * signalling timeout and CRC errors even on CMD0. Resetting * it on each ios seems to solve the problem. */ - if(host->chip->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS) + if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS) sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); mmiowb(); @@ -994,10 +868,10 @@ static void sdhci_tasklet_finish(unsigned long param) if (mrq->cmd->error || (mrq->data && (mrq->data->error || (mrq->data->stop && mrq->data->stop->error))) || - (host->chip->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)) { + (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)) { /* Some controllers need this kick or reset won't work here */ - if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) { + if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) { unsigned int clock; /* This is to force an update */ @@ -1229,165 +1103,90 @@ out: #ifdef CONFIG_PM -static int sdhci_suspend (struct pci_dev *pdev, pm_message_t state) +int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state) { - struct sdhci_chip *chip; - int i, ret; - - chip = pci_get_drvdata(pdev); - if (!chip) - return 0; - - DBG("Suspending...\n"); - - for (i = 0;i < chip->num_slots;i++) { - if (!chip->hosts[i]) - continue; - ret = mmc_suspend_host(chip->hosts[i]->mmc, state); - if (ret) { - for (i--;i >= 0;i--) - mmc_resume_host(chip->hosts[i]->mmc); - return ret; - } - } - - pci_save_state(pdev); - pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); + int ret; - for (i = 0;i < chip->num_slots;i++) { - if (!chip->hosts[i]) - continue; - free_irq(chip->hosts[i]->irq, chip->hosts[i]); - } + ret = mmc_suspend_host(host->mmc, state); + if (ret) + return ret; - pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); + free_irq(host->irq, host); return 0; } -static int sdhci_resume (struct pci_dev *pdev) -{ - struct sdhci_chip *chip; - int i, ret; +EXPORT_SYMBOL_GPL(sdhci_suspend_host); - chip = pci_get_drvdata(pdev); - if (!chip) - return 0; +int sdhci_resume_host(struct sdhci_host *host) +{ + int ret; - DBG("Resuming...\n"); + if (host->flags & SDHCI_USE_DMA) { + if (host->ops->enable_dma) + host->ops->enable_dma(host); + } - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - ret = pci_enable_device(pdev); + ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED, + mmc_hostname(host->mmc), host); if (ret) return ret; - for (i = 0;i < chip->num_slots;i++) { - if (!chip->hosts[i]) - continue; - if (chip->hosts[i]->flags & SDHCI_USE_DMA) - pci_set_master(pdev); - ret = request_irq(chip->hosts[i]->irq, sdhci_irq, - IRQF_SHARED, mmc_hostname(chip->hosts[i]->mmc), - chip->hosts[i]); - if (ret) - return ret; - sdhci_init(chip->hosts[i]); - mmiowb(); - ret = mmc_resume_host(chip->hosts[i]->mmc); - if (ret) - return ret; - } + sdhci_init(host); + mmiowb(); + + ret = mmc_resume_host(host->mmc); + if (ret) + return ret; return 0; } -#else /* CONFIG_PM */ - -#define sdhci_suspend NULL -#define sdhci_resume NULL +EXPORT_SYMBOL_GPL(sdhci_resume_host); #endif /* CONFIG_PM */ /*****************************************************************************\ * * - * Device probing/removal * + * Device allocation/registration * * * \*****************************************************************************/ -static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) +struct sdhci_host *sdhci_alloc_host(struct device *dev, + size_t priv_size) { - int ret; - unsigned int version; - struct sdhci_chip *chip; struct mmc_host *mmc; struct sdhci_host *host; - u8 first_bar; - unsigned int caps; - - chip = pci_get_drvdata(pdev); - BUG_ON(!chip); - - ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &first_bar); - if (ret) - return ret; - - first_bar &= PCI_SLOT_INFO_FIRST_BAR_MASK; + WARN_ON(dev == NULL); - if (first_bar > 5) { - printk(KERN_ERR DRIVER_NAME ": Invalid first BAR. Aborting.\n"); - return -ENODEV; - } - - if (!(pci_resource_flags(pdev, first_bar + slot) & IORESOURCE_MEM)) { - printk(KERN_ERR DRIVER_NAME ": BAR is not iomem. Aborting.\n"); - return -ENODEV; - } - - if (pci_resource_len(pdev, first_bar + slot) != 0x100) { - printk(KERN_ERR DRIVER_NAME ": Invalid iomem size. " - "You may experience problems.\n"); - } - - if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) { - printk(KERN_ERR DRIVER_NAME ": Vendor specific interface. Aborting.\n"); - return -ENODEV; - } - - if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) { - printk(KERN_ERR DRIVER_NAME ": Unknown interface. Aborting.\n"); - return -ENODEV; - } - - mmc = mmc_alloc_host(sizeof(struct sdhci_host), &pdev->dev); + mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev); if (!mmc) - return -ENOMEM; + return ERR_PTR(-ENOMEM); host = mmc_priv(mmc); host->mmc = mmc; - host->chip = chip; - chip->hosts[slot] = host; + return host; +} - host->bar = first_bar + slot; +EXPORT_SYMBOL_GPL(sdhci_alloc_host); - host->addr = pci_resource_start(pdev, host->bar); - host->irq = pdev->irq; +int sdhci_add_host(struct sdhci_host *host) +{ + struct mmc_host *mmc; + unsigned int caps; + unsigned int version; + int ret; - DBG("slot %d at 0x%08lx, irq %d\n", slot, host->addr, host->irq); + WARN_ON(host == NULL); + if (host == NULL) + return -EINVAL; - ret = pci_request_region(pdev, host->bar, mmc_hostname(mmc)); - if (ret) - goto free; + mmc = host->mmc; - host->ioaddr = ioremap_nocache(host->addr, - pci_resource_len(pdev, host->bar)); - if (!host->ioaddr) { - ret = -ENOMEM; - goto release; - } + if (debug_quirks) + host->quirks = debug_quirks; sdhci_reset(host, SDHCI_RESET_ALL); @@ -1401,46 +1200,40 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) caps = readl(host->ioaddr + SDHCI_CAPABILITIES); - if (chip->quirks & SDHCI_QUIRK_FORCE_DMA) + if (host->quirks & SDHCI_QUIRK_FORCE_DMA) host->flags |= SDHCI_USE_DMA; else if (!(caps & SDHCI_CAN_DO_DMA)) DBG("Controller doesn't have DMA capability\n"); else host->flags |= SDHCI_USE_DMA; - if ((chip->quirks & SDHCI_QUIRK_BROKEN_DMA) && + if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) && (host->flags & SDHCI_USE_DMA)) { DBG("Disabling DMA as it is marked broken\n"); host->flags &= ~SDHCI_USE_DMA; } - if (((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) && - (host->flags & SDHCI_USE_DMA)) { - printk(KERN_WARNING "%s: Will use DMA " - "mode even though HW doesn't fully " - "claim to support it.\n", mmc_hostname(mmc)); - } - if (host->flags & SDHCI_USE_DMA) { - if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { - printk(KERN_WARNING "%s: No suitable DMA available. " - "Falling back to PIO.\n", mmc_hostname(mmc)); - host->flags &= ~SDHCI_USE_DMA; + if (host->ops->enable_dma) { + if (host->ops->enable_dma(host)) { + printk(KERN_WARNING "%s: No suitable DMA " + "available. Falling back to PIO.\n", + mmc_hostname(mmc)); + host->flags &= ~SDHCI_USE_DMA; + } } } - if (host->flags & SDHCI_USE_DMA) - pci_set_master(pdev); - else /* XXX: Hack to get MMC layer to avoid highmem */ - pdev->dma_mask = 0; + /* XXX: Hack to get MMC layer to avoid highmem */ + if (!(host->flags & SDHCI_USE_DMA)) + mmc_dev(host->mmc)->dma_mask = 0; host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; if (host->max_clk == 0) { printk(KERN_ERR "%s: Hardware doesn't specify base clock " "frequency.\n", mmc_hostname(mmc)); - ret = -ENODEV; - goto unmap; + return -ENODEV; } host->max_clk *= 1000000; @@ -1449,8 +1242,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) if (host->timeout_clk == 0) { printk(KERN_ERR "%s: Hardware doesn't specify timeout clock " "frequency.\n", mmc_hostname(mmc)); - ret = -ENODEV; - goto unmap; + return -ENODEV; } if (caps & SDHCI_TIMEOUT_CLK_UNIT) host->timeout_clk *= 1000; @@ -1477,8 +1269,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) if (mmc->ocr_avail == 0) { printk(KERN_ERR "%s: Hardware doesn't report any " "support voltages.\n", mmc_hostname(mmc)); - ret = -ENODEV; - goto unmap; + return -ENODEV; } spin_lock_init(&host->lock); @@ -1548,7 +1339,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) host->led.default_trigger = mmc_hostname(mmc); host->led.brightness_set = sdhci_led_control; - ret = led_classdev_register(&pdev->dev, &host->led); + ret = led_classdev_register(mmc_dev(mmc), &host->led); if (ret) goto reset; #endif @@ -1557,8 +1348,8 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) mmc_add_host(mmc); - printk(KERN_INFO "%s: SDHCI at 0x%08lx irq %d %s\n", - mmc_hostname(mmc), host->addr, host->irq, + printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n", + mmc_hostname(mmc), host->hw_name, mmc_dev(mmc)->bus_id, (host->flags & SDHCI_USE_DMA)?"DMA":"PIO"); return 0; @@ -1571,29 +1362,15 @@ reset: untasklet: tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); -unmap: - iounmap(host->ioaddr); -release: - pci_release_region(pdev, host->bar); -free: - mmc_free_host(mmc); return ret; } -static void sdhci_remove_slot(struct pci_dev *pdev, int slot) -{ - struct sdhci_chip *chip; - struct mmc_host *mmc; - struct sdhci_host *host; - - chip = pci_get_drvdata(pdev); - host = chip->hosts[slot]; - mmc = host->mmc; - - chip->hosts[slot] = NULL; +EXPORT_SYMBOL_GPL(sdhci_add_host); - mmc_remove_host(mmc); +void sdhci_remove_host(struct sdhci_host *host) +{ + mmc_remove_host(host->mmc); #ifdef CONFIG_LEDS_CLASS led_classdev_unregister(&host->led); @@ -1607,107 +1384,16 @@ static void sdhci_remove_slot(struct pci_dev *pdev, int slot) tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); - - iounmap(host->ioaddr); - - pci_release_region(pdev, host->bar); - - mmc_free_host(mmc); } -static int __devinit sdhci_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int ret, i; - u8 slots, rev; - struct sdhci_chip *chip; - - BUG_ON(pdev == NULL); - BUG_ON(ent == NULL); - - pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev); - - printk(KERN_INFO DRIVER_NAME - ": SDHCI controller found at %s [%04x:%04x] (rev %x)\n", - pci_name(pdev), (int)pdev->vendor, (int)pdev->device, - (int)rev); - - ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots); - if (ret) - return ret; - - slots = PCI_SLOT_INFO_SLOTS(slots) + 1; - DBG("found %d slot(s)\n", slots); - if (slots == 0) - return -ENODEV; +EXPORT_SYMBOL_GPL(sdhci_remove_host); - ret = pci_enable_device(pdev); - if (ret) - return ret; - - chip = kzalloc(sizeof(struct sdhci_chip) + - sizeof(struct sdhci_host*) * slots, GFP_KERNEL); - if (!chip) { - ret = -ENOMEM; - goto err; - } - - chip->pdev = pdev; - chip->quirks = ent->driver_data; - - if (debug_quirks) - chip->quirks = debug_quirks; - - chip->num_slots = slots; - pci_set_drvdata(pdev, chip); - - for (i = 0;i < slots;i++) { - ret = sdhci_probe_slot(pdev, i); - if (ret) { - for (i--;i >= 0;i--) - sdhci_remove_slot(pdev, i); - goto free; - } - } - - return 0; - -free: - pci_set_drvdata(pdev, NULL); - kfree(chip); - -err: - pci_disable_device(pdev); - return ret; -} - -static void __devexit sdhci_remove(struct pci_dev *pdev) +void sdhci_free_host(struct sdhci_host *host) { - int i; - struct sdhci_chip *chip; - - chip = pci_get_drvdata(pdev); - - if (chip) { - for (i = 0;i < chip->num_slots;i++) - sdhci_remove_slot(pdev, i); - - pci_set_drvdata(pdev, NULL); - - kfree(chip); - } - - pci_disable_device(pdev); + mmc_free_host(host->mmc); } -static struct pci_driver sdhci_driver = { - .name = DRIVER_NAME, - .id_table = pci_ids, - .probe = sdhci_probe, - .remove = __devexit_p(sdhci_remove), - .suspend = sdhci_suspend, - .resume = sdhci_resume, -}; +EXPORT_SYMBOL_GPL(sdhci_free_host); /*****************************************************************************\ * * @@ -1721,14 +1407,11 @@ static int __init sdhci_drv_init(void) ": Secure Digital Host Controller Interface driver\n"); printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); - return pci_register_driver(&sdhci_driver); + return 0; } static void __exit sdhci_drv_exit(void) { - DBG("Exiting\n"); - - pci_unregister_driver(&sdhci_driver); } module_init(sdhci_drv_init); @@ -1737,7 +1420,7 @@ module_exit(sdhci_drv_exit); module_param(debug_quirks, uint, 0444); MODULE_AUTHOR("Pierre Ossman "); -MODULE_DESCRIPTION("Secure Digital Host Controller Interface driver"); +MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver"); MODULE_LICENSE("GPL"); MODULE_PARM_DESC(debug_quirks, "Force certain quirks."); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 299118de8933..22fc258b12aa 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -9,18 +9,6 @@ * your option) any later version. */ -/* - * PCI registers - */ - -#define PCI_SDHCI_IFPIO 0x00 -#define PCI_SDHCI_IFDMA 0x01 -#define PCI_SDHCI_IFVENDOR 0x02 - -#define PCI_SLOT_INFO 0x40 /* 8 bits */ -#define PCI_SLOT_INFO_SLOTS(x) ((x >> 4) & 7) -#define PCI_SLOT_INFO_FIRST_BAR_MASK 0x07 - /* * Controller registers */ @@ -162,10 +150,43 @@ #define SDHCI_SPEC_VER_MASK 0x00FF #define SDHCI_SPEC_VER_SHIFT 0 -struct sdhci_chip; +struct sdhci_ops; struct sdhci_host { - struct sdhci_chip *chip; + /* Data set by hardware interface driver */ + const char *hw_name; /* Hardware bus name */ + + unsigned int quirks; /* Deviations from spec. */ + +/* Controller doesn't honor resets unless we touch the clock register */ +#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) +/* Controller has bad caps bits, but really supports DMA */ +#define SDHCI_QUIRK_FORCE_DMA (1<<1) +/* Controller doesn't like to be reset when there is no card inserted. */ +#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) +/* Controller doesn't like clearing the power reg before a change */ +#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) +/* Controller has flaky internal state so reset it on each ios change */ +#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) +/* Controller has an unusable DMA engine */ +#define SDHCI_QUIRK_BROKEN_DMA (1<<5) +/* Controller can only DMA from 32-bit aligned addresses */ +#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<6) +/* Controller can only DMA chunk sizes that are a multiple of 32 bits */ +#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7) +/* Controller needs to be reset after each request to stay stable */ +#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8) +/* Controller needs voltage and power writes to happen separately */ +#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9) +/* Controller has an off-by-one issue with timeout value */ +#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1<<10) + + int irq; /* Device IRQ */ + void __iomem * ioaddr; /* Mapped address */ + + const struct sdhci_ops *ops; /* Low level hw interface */ + + /* Internal data */ struct mmc_host *mmc; /* MMC structure */ #ifdef CONFIG_LEDS_CLASS @@ -194,22 +215,33 @@ struct sdhci_host { int offset; /* Offset into current sg */ int remain; /* Bytes left in current */ - int irq; /* Device IRQ */ - int bar; /* PCI BAR index */ - unsigned long addr; /* Bus address */ - void __iomem * ioaddr; /* Mapped address */ - struct tasklet_struct card_tasklet; /* Tasklet structures */ struct tasklet_struct finish_tasklet; struct timer_list timer; /* Timer for timeouts */ -}; -struct sdhci_chip { - struct pci_dev *pdev; + unsigned long private[0] ____cacheline_aligned; +}; - unsigned long quirks; - int num_slots; /* Slots on controller */ - struct sdhci_host *hosts[0]; /* Pointers to hosts */ +struct sdhci_ops { + int (*enable_dma)(struct sdhci_host *host); }; + + +extern struct sdhci_host *sdhci_alloc_host(struct device *dev, + size_t priv_size); +extern void sdhci_free_host(struct sdhci_host *host); + +static inline void *sdhci_priv(struct sdhci_host *host) +{ + return (void *)host->private; +} + +extern int sdhci_add_host(struct sdhci_host *host); +extern void sdhci_remove_host(struct sdhci_host *host); + +#ifdef CONFIG_PM +extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state); +extern int sdhci_resume_host(struct sdhci_host *host); +#endif -- cgit v1.2.3 From 3815a0ebab678c20d0d9c66af5ee9e68807b6681 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sat, 22 Mar 2008 22:05:40 +0100 Subject: sdhci: remove forced dma quirks Remove the quirk to force DMA on the Ricoh and TI controllers as it is no longer needed. The only bug they have is that they use an incorrect PCI interface value, and that is not respected anymore. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-pci.c | 22 ++-------------------- 1 file changed, 2 insertions(+), 20 deletions(-) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 2a3dd6cc7bf7..51798ec56446 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -44,8 +44,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_RICOH_R5C822, .subvendor = PCI_VENDOR_ID_IBM, .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_CLOCK_BEFORE_RESET | - SDHCI_QUIRK_FORCE_DMA, + .driver_data = SDHCI_QUIRK_CLOCK_BEFORE_RESET, }, { @@ -53,24 +52,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_RICOH_R5C822, .subvendor = PCI_VENDOR_ID_SAMSUNG, .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_FORCE_DMA | - SDHCI_QUIRK_NO_CARD_NO_RESET, - }, - - { - .vendor = PCI_VENDOR_ID_RICOH, - .device = PCI_DEVICE_ID_RICOH_R5C822, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_FORCE_DMA, - }, - - { - .vendor = PCI_VENDOR_ID_TI, - .device = PCI_DEVICE_ID_TI_XX21_XX11_SD, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_FORCE_DMA, + .driver_data = SDHCI_QUIRK_NO_CARD_NO_RESET, }, { -- cgit v1.2.3 From 22606405894a3ca5796eb4454a4b83af611fd201 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 23 Mar 2008 19:33:23 +0100 Subject: sdhci: more complex quirks handling Extend the quirks handling in the PCI driver to be able to have callbacks and not just flags. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-pci.c | 129 ++++++++++++++++++++++++++++--------------- 1 file changed, 86 insertions(+), 43 deletions(-) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 51798ec56446..5094fe805764 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -38,21 +38,82 @@ #define MAX_SLOTS 8 -static const struct pci_device_id pci_ids[] __devinitdata = { - { - .vendor = PCI_VENDOR_ID_RICOH, - .device = PCI_DEVICE_ID_RICOH_R5C822, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_CLOCK_BEFORE_RESET, - }, +struct sdhci_pci_chip; + +struct sdhci_pci_fixes { + unsigned int quirks; + + int (*probe)(struct sdhci_pci_chip*); +}; + +struct sdhci_pci_slot { + struct sdhci_pci_chip *chip; + struct sdhci_host *host; + int pci_bar; +}; + +struct sdhci_pci_chip { + struct pci_dev *pdev; + + unsigned int quirks; + const struct sdhci_pci_fixes *fixes; + + int num_slots; /* Slots on controller */ + struct sdhci_pci_slot *slots[MAX_SLOTS]; /* Pointers to host slots */ +}; + + +/*****************************************************************************\ + * * + * Hardware specific quirk handling * + * * +\*****************************************************************************/ + +static int ricoh_probe(struct sdhci_pci_chip *chip) +{ + if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) + chip->quirks |= SDHCI_QUIRK_CLOCK_BEFORE_RESET; + + if (chip->pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG) + chip->quirks |= SDHCI_QUIRK_NO_CARD_NO_RESET; + + return 0; +} + +static const struct sdhci_pci_fixes sdhci_ricoh = { + .probe = ricoh_probe, +}; + +static const struct sdhci_pci_fixes sdhci_ene_712 = { + .quirks = SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_BROKEN_DMA, +}; + +static const struct sdhci_pci_fixes sdhci_ene_714 = { + .quirks = SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | + SDHCI_QUIRK_BROKEN_DMA, +}; + +static const struct sdhci_pci_fixes sdhci_cafe = { + .quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | + SDHCI_QUIRK_INCR_TIMEOUT_CONTROL, +}; + +static const struct sdhci_pci_fixes sdhci_jmicron = { + .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE | + SDHCI_QUIRK_RESET_AFTER_REQUEST, +}; + +static const struct pci_device_id pci_ids[] __devinitdata = { { .vendor = PCI_VENDOR_ID_RICOH, .device = PCI_DEVICE_ID_RICOH_R5C822, - .subvendor = PCI_VENDOR_ID_SAMSUNG, + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_NO_CARD_NO_RESET, + .driver_data = (kernel_ulong_t)&sdhci_ricoh, }, { @@ -60,8 +121,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_ENE_CB712_SD, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_BROKEN_DMA, + .driver_data = (kernel_ulong_t)&sdhci_ene_712, }, { @@ -69,8 +129,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_ENE_CB712_SD_2, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_BROKEN_DMA, + .driver_data = (kernel_ulong_t)&sdhci_ene_712, }, { @@ -78,9 +137,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_ENE_CB714_SD, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | - SDHCI_QUIRK_BROKEN_DMA, + .driver_data = (kernel_ulong_t)&sdhci_ene_714, }, { @@ -88,9 +145,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_ENE_CB714_SD_2, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | - SDHCI_QUIRK_BROKEN_DMA, + .driver_data = (kernel_ulong_t)&sdhci_ene_714, }, { @@ -98,8 +153,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_MARVELL_CAFE_SD, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | - SDHCI_QUIRK_INCR_TIMEOUT_CONTROL, + .driver_data = (kernel_ulong_t)&sdhci_cafe, }, { @@ -107,9 +161,7 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_32BIT_DMA_ADDR | - SDHCI_QUIRK_32BIT_DMA_SIZE | - SDHCI_QUIRK_RESET_AFTER_REQUEST, + .driver_data = (kernel_ulong_t)&sdhci_jmicron, }, { /* Generic SD host controller */ @@ -121,23 +173,6 @@ static const struct pci_device_id pci_ids[] __devinitdata = { MODULE_DEVICE_TABLE(pci, pci_ids); -struct sdhci_pci_chip; - -struct sdhci_pci_slot { - struct sdhci_pci_chip *chip; - struct sdhci_host *host; - - int pci_bar; -}; - -struct sdhci_pci_chip { - struct pci_dev *pdev; - unsigned int quirks; - - int num_slots; /* Slots on controller */ - struct sdhci_pci_slot *slots[MAX_SLOTS]; /* Pointers to host slots */ -}; - /*****************************************************************************\ * * * SDHCI core callbacks * @@ -389,11 +424,19 @@ static int __devinit sdhci_pci_probe(struct pci_dev *pdev, } chip->pdev = pdev; - chip->quirks = ent->driver_data; + chip->fixes = (const struct sdhci_pci_fixes*)ent->driver_data; + if (chip->fixes) + chip->quirks = chip->fixes->quirks; chip->num_slots = slots; pci_set_drvdata(pdev, chip); + if (chip->fixes && chip->fixes->probe) { + ret = chip->fixes->probe(chip); + if (ret) + goto free; + } + for (i = 0;i < slots;i++) { slot = sdhci_pci_probe_slot(pdev, chip, first_bar + i); if (IS_ERR(slot)) { -- cgit v1.2.3 From ee53ab5d73998e502801c024a08de2c39a92c52a Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sat, 5 Jul 2008 00:25:15 +0200 Subject: sdhci: make workaround for timeout bug more general Give the quirk for broken timeout handling a better chance of handling more controllers by simply classifying the system as broken and setting a fixed value. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-pci.c | 2 +- drivers/mmc/host/sdhci.c | 50 ++++++++++++++++++++++++++------------------ drivers/mmc/host/sdhci.h | 4 ++-- 3 files changed, 33 insertions(+), 23 deletions(-) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 5094fe805764..856bb2b2837e 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -98,7 +98,7 @@ static const struct sdhci_pci_fixes sdhci_ene_714 = { static const struct sdhci_pci_fixes sdhci_cafe = { .quirks = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | - SDHCI_QUIRK_INCR_TIMEOUT_CONTROL, + SDHCI_QUIRK_BROKEN_TIMEOUT_VAL, }; static const struct sdhci_pci_fixes sdhci_jmicron = { diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 8ce01d434ea8..95b081a9967b 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -314,23 +314,19 @@ static void sdhci_transfer_pio(struct sdhci_host *host) DBG("PIO transfer complete.\n"); } -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) +static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) { u8 count; unsigned target_timeout, current_timeout; - WARN_ON(host->data); - - if (data == NULL) - return; - - /* Sanity checks */ - BUG_ON(data->blksz * data->blocks > 524288); - BUG_ON(data->blksz > host->mmc->max_blk_size); - BUG_ON(data->blocks > 65535); - - host->data = data; - host->data_early = 0; + /* + * If the host controller provides us with an incorrect timeout + * value, just skip the check and use 0xE. The hardware may take + * longer to time out, but that's much better than having a too-short + * timeout value. + */ + if ((host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)) + return 0xE; /* timeout in us */ target_timeout = data->timeout_ns / 1000 + @@ -355,19 +351,33 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) break; } - /* - * Compensate for an off-by-one error in the CaFe hardware; otherwise, - * a too-small count gives us interrupt timeouts. - */ - if ((host->quirks & SDHCI_QUIRK_INCR_TIMEOUT_CONTROL)) - count++; - if (count >= 0xF) { printk(KERN_WARNING "%s: Too large timeout requested!\n", mmc_hostname(host->mmc)); count = 0xE; } + return count; +} + +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) +{ + u8 count; + + WARN_ON(host->data); + + if (data == NULL) + return; + + /* Sanity checks */ + BUG_ON(data->blksz * data->blocks > 524288); + BUG_ON(data->blksz > host->mmc->max_blk_size); + BUG_ON(data->blocks > 65535); + + host->data = data; + host->data_early = 0; + + count = sdhci_calc_timeout(host, data); writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL); if (host->flags & SDHCI_USE_DMA) diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 22fc258b12aa..7ce12f3e7452 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -178,8 +178,8 @@ struct sdhci_host { #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8) /* Controller needs voltage and power writes to happen separately */ #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9) -/* Controller has an off-by-one issue with timeout value */ -#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1<<10) +/* Controller provides an incorrect timeout value for transfers */ +#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<10) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ -- cgit v1.2.3 From 45211e21598441a32e53cf5032b7faeac143df6d Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Mon, 24 Mar 2008 13:09:09 +0100 Subject: sdhci: toggle JMicron PMOS setting Some of the JMicron chips requires us to manually enable the power output stages of the chip. Add the necessary hooks and functions to manage this. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-pci.c | 67 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 856bb2b2837e..ef77ed1bd114 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -44,6 +44,8 @@ struct sdhci_pci_fixes { unsigned int quirks; int (*probe)(struct sdhci_pci_chip*); + + int (*resume)(struct sdhci_pci_chip*); }; struct sdhci_pci_slot { @@ -101,10 +103,69 @@ static const struct sdhci_pci_fixes sdhci_cafe = { SDHCI_QUIRK_BROKEN_TIMEOUT_VAL, }; +static int jmicron_pmos(struct sdhci_pci_chip *chip, int on) +{ + u8 scratch; + int ret; + + ret = pci_read_config_byte(chip->pdev, 0xAE, &scratch); + if (ret) + return ret; + + /* + * Turn PMOS on [bit 0], set over current detection to 2.4 V + * [bit 1:2] and enable over current debouncing [bit 6]. + */ + if (on) + scratch |= 0x47; + else + scratch &= ~0x47; + + ret = pci_write_config_byte(chip->pdev, 0xAE, scratch); + if (ret) + return ret; + + return 0; +} + +static int jmicron_probe(struct sdhci_pci_chip *chip) +{ + int ret; + + /* + * JMicron chips need a bit of a nudge to enable the power + * output pins. + */ + ret = jmicron_pmos(chip, 1); + if (ret) { + dev_err(&chip->pdev->dev, "Failure enabling card power\n"); + return ret; + } + + return 0; +} + +static int jmicron_resume(struct sdhci_pci_chip *chip) +{ + int ret; + + ret = jmicron_pmos(chip, 1); + if (ret) { + dev_err(&chip->pdev->dev, "Failure enabling card power\n"); + return ret; + } + + return 0; +} + static const struct sdhci_pci_fixes sdhci_jmicron = { .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_RESET_AFTER_REQUEST, + + .probe = jmicron_probe, + + .resume = jmicron_resume, }; static const struct pci_device_id pci_ids[] __devinitdata = { @@ -264,6 +325,12 @@ static int sdhci_pci_resume (struct pci_dev *pdev) if (ret) return ret; + if (chip->fixes && chip->fixes->resume) { + ret = chip->fixes->resume(chip); + if (ret) + return ret; + } + for (i = 0;i < chip->num_slots;i++) { slot = chip->slots[i]; if (!slot) -- cgit v1.2.3 From 4489428ab5a49a6f443d9aa17f1d891417787d7b Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Fri, 4 Apr 2008 19:36:59 +0200 Subject: sdhci: support JMicron secondary interface JMicron chips sometimes have two interfaces to work around limitations in Microsoft's sdhci driver. This patch allows us to use either interface. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-pci.c | 127 ++++++++++++++++++++++++++++++++++++++++++- include/linux/pci_ids.h | 1 + 2 files changed, 126 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index ef77ed1bd114..5dcb4958e47b 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -39,12 +39,18 @@ #define MAX_SLOTS 8 struct sdhci_pci_chip; +struct sdhci_pci_slot; struct sdhci_pci_fixes { unsigned int quirks; int (*probe)(struct sdhci_pci_chip*); + int (*probe_slot)(struct sdhci_pci_slot*); + void (*remove_slot)(struct sdhci_pci_slot*); + + int (*suspend)(struct sdhci_pci_chip*, + pm_message_t); int (*resume)(struct sdhci_pci_chip*); }; @@ -132,6 +138,38 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) { int ret; + /* + * JMicron chips can have two interfaces to the same hardware + * in order to work around limitations in Microsoft's driver. + * We need to make sure we only bind to one of them. + * + * This code assumes two things: + * + * 1. The PCI code adds subfunctions in order. + * + * 2. The MMC interface has a lower subfunction number + * than the SD interface. + */ + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD) { + struct pci_dev *sd_dev; + + sd_dev = NULL; + while ((sd_dev = pci_get_device(PCI_VENDOR_ID_JMICRON, + PCI_DEVICE_ID_JMICRON_JMB38X_MMC, sd_dev)) != NULL) { + if ((PCI_SLOT(chip->pdev->devfn) == + PCI_SLOT(sd_dev->devfn)) && + (chip->pdev->bus == sd_dev->bus)) + break; + } + + if (sd_dev) { + pci_dev_put(sd_dev); + dev_info(&chip->pdev->dev, "Refusing to bind to " + "secondary interface.\n"); + return -ENODEV; + } + } + /* * JMicron chips need a bit of a nudge to enable the power * output pins. @@ -145,9 +183,58 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) return 0; } +static void jmicron_enable_mmc(struct sdhci_host *host, int on) +{ + u8 scratch; + + scratch = readb(host->ioaddr + 0xC0); + + if (on) + scratch |= 0x01; + else + scratch &= ~0x01; + + writeb(scratch, host->ioaddr + 0xC0); +} + +static int jmicron_probe_slot(struct sdhci_pci_slot *slot) +{ + /* + * The secondary interface requires a bit set to get the + * interrupts. + */ + if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) + jmicron_enable_mmc(slot->host, 1); + + return 0; +} + +static void jmicron_remove_slot(struct sdhci_pci_slot *slot) +{ + if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) + jmicron_enable_mmc(slot->host, 0); +} + +static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state) +{ + int i; + + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) { + for (i = 0;i < chip->num_slots;i++) + jmicron_enable_mmc(chip->slots[i]->host, 0); + } + + return 0; +} + static int jmicron_resume(struct sdhci_pci_chip *chip) { - int ret; + int ret, i; + + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) { + for (i = 0;i < chip->num_slots;i++) + jmicron_enable_mmc(chip->slots[i]->host, 1); + } ret = jmicron_pmos(chip, 1); if (ret) { @@ -165,6 +252,10 @@ static const struct sdhci_pci_fixes sdhci_jmicron = { .probe = jmicron_probe, + .probe_slot = jmicron_probe_slot, + .remove_slot = jmicron_remove_slot, + + .suspend = jmicron_suspend, .resume = jmicron_resume, }; @@ -225,6 +316,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .driver_data = (kernel_ulong_t)&sdhci_jmicron, }, + { + .vendor = PCI_VENDOR_ID_JMICRON, + .device = PCI_DEVICE_ID_JMICRON_JMB38X_MMC, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_jmicron, + }, + { /* Generic SD host controller */ PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) }, @@ -301,6 +400,15 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state) } } + if (chip->fixes && chip->fixes->suspend) { + ret = chip->fixes->suspend(chip, state); + if (ret) { + for (i = chip->num_slots - 1;i >= 0;i--) + sdhci_resume_host(chip->slots[i]->host); + return ret; + } + } + pci_save_state(pdev); pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); pci_disable_device(pdev); @@ -418,12 +526,22 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( goto release; } + if (chip->fixes && chip->fixes->probe_slot) { + ret = chip->fixes->probe_slot(slot); + if (ret) + goto unmap; + } + ret = sdhci_add_host(host); if (ret) - goto unmap; + goto remove; return slot; +remove: + if (chip->fixes && chip->fixes->remove_slot) + chip->fixes->remove_slot(slot); + unmap: iounmap(host->ioaddr); @@ -437,7 +555,12 @@ release: static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot) { sdhci_remove_host(slot->host); + + if (slot->chip->fixes && slot->chip->fixes->remove_slot) + slot->chip->fixes->remove_slot(slot); + pci_release_region(slot->chip->pdev, slot->pci_bar); + sdhci_free_host(slot->host); } diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 65953822c9cb..30153473bc37 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2188,6 +2188,7 @@ #define PCI_DEVICE_ID_JMICRON_JMB366 0x2366 #define PCI_DEVICE_ID_JMICRON_JMB368 0x2368 #define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381 +#define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382 #define PCI_DEVICE_ID_JMICRON_JMB38X_MS 0x2383 #define PCI_VENDOR_ID_KORENIX 0x1982 -- cgit v1.2.3 From 1e72859e3ae16346d4007024b20d2d4ef387dcc3 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Wed, 16 Apr 2008 19:13:13 +0200 Subject: sdhci: handle hot-remove Gracefully handle when the device is suddenly removed. Do a test read and avoid any further access if that read returns -1. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-pci.c | 21 ++++++++++++++----- drivers/mmc/host/sdhci.c | 48 ++++++++++++++++++++++++++++++++++++-------- drivers/mmc/host/sdhci.h | 3 ++- 3 files changed, 58 insertions(+), 14 deletions(-) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 5dcb4958e47b..8554466e0f4e 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -47,7 +47,7 @@ struct sdhci_pci_fixes { int (*probe)(struct sdhci_pci_chip*); int (*probe_slot)(struct sdhci_pci_slot*); - void (*remove_slot)(struct sdhci_pci_slot*); + void (*remove_slot)(struct sdhci_pci_slot*, int); int (*suspend)(struct sdhci_pci_chip*, pm_message_t); @@ -209,8 +209,11 @@ static int jmicron_probe_slot(struct sdhci_pci_slot *slot) return 0; } -static void jmicron_remove_slot(struct sdhci_pci_slot *slot) +static void jmicron_remove_slot(struct sdhci_pci_slot *slot, int dead) { + if (dead) + return; + if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) jmicron_enable_mmc(slot->host, 0); } @@ -540,7 +543,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( remove: if (chip->fixes && chip->fixes->remove_slot) - chip->fixes->remove_slot(slot); + chip->fixes->remove_slot(slot, 0); unmap: iounmap(host->ioaddr); @@ -554,10 +557,18 @@ release: static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot) { - sdhci_remove_host(slot->host); + int dead; + u32 scratch; + + dead = 0; + scratch = readl(slot->host->ioaddr + SDHCI_INT_STATUS); + if (scratch == (u32)-1) + dead = 1; + + sdhci_remove_host(slot->host, dead); if (slot->chip->fixes && slot->chip->fixes->remove_slot) - slot->chip->fixes->remove_slot(slot); + slot->chip->fixes->remove_slot(slot, dead); pci_release_region(slot->chip->pdev, slot->pci_bar); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 95b081a9967b..0ab582e77ac2 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -712,7 +712,8 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->mrq = mrq; - if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) { + if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT) + || (host->flags & SDHCI_DEVICE_DEAD)) { host->mrq->cmd->error = -ENOMEDIUM; tasklet_schedule(&host->finish_tasklet); } else @@ -732,6 +733,9 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) spin_lock_irqsave(&host->lock, flags); + if (host->flags & SDHCI_DEVICE_DEAD) + goto out; + /* * Reset the chip on each power off. * Should clear out any weird states. @@ -770,6 +774,7 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS) sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA); +out: mmiowb(); spin_unlock_irqrestore(&host->lock, flags); } @@ -784,7 +789,10 @@ static int sdhci_get_ro(struct mmc_host *mmc) spin_lock_irqsave(&host->lock, flags); - present = readl(host->ioaddr + SDHCI_PRESENT_STATE); + if (host->flags & SDHCI_DEVICE_DEAD) + present = 0; + else + present = readl(host->ioaddr + SDHCI_PRESENT_STATE); spin_unlock_irqrestore(&host->lock, flags); @@ -801,6 +809,9 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable) spin_lock_irqsave(&host->lock, flags); + if (host->flags & SDHCI_DEVICE_DEAD) + goto out; + ier = readl(host->ioaddr + SDHCI_INT_ENABLE); ier &= ~SDHCI_INT_CARD_INT; @@ -810,6 +821,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable) writel(ier, host->ioaddr + SDHCI_INT_ENABLE); writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE); +out: mmiowb(); spin_unlock_irqrestore(&host->lock, flags); @@ -875,10 +887,11 @@ static void sdhci_tasklet_finish(unsigned long param) * The controller needs a reset of internal state machines * upon error conditions. */ - if (mrq->cmd->error || - (mrq->data && (mrq->data->error || - (mrq->data->stop && mrq->data->stop->error))) || - (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)) { + if (!(host->flags & SDHCI_DEVICE_DEAD) && + (mrq->cmd->error || + (mrq->data && (mrq->data->error || + (mrq->data->stop && mrq->data->stop->error))) || + (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) { /* Some controllers need this kick or reset won't work here */ if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) { @@ -1378,15 +1391,34 @@ untasklet: EXPORT_SYMBOL_GPL(sdhci_add_host); -void sdhci_remove_host(struct sdhci_host *host) +void sdhci_remove_host(struct sdhci_host *host, int dead) { + unsigned long flags; + + if (dead) { + spin_lock_irqsave(&host->lock, flags); + + host->flags |= SDHCI_DEVICE_DEAD; + + if (host->mrq) { + printk(KERN_ERR "%s: Controller removed during " + " transfer!\n", mmc_hostname(host->mmc)); + + host->mrq->cmd->error = -ENOMEDIUM; + tasklet_schedule(&host->finish_tasklet); + } + + spin_unlock_irqrestore(&host->lock, flags); + } + mmc_remove_host(host->mmc); #ifdef CONFIG_LEDS_CLASS led_classdev_unregister(&host->led); #endif - sdhci_reset(host, SDHCI_RESET_ALL); + if (!dead) + sdhci_reset(host, SDHCI_RESET_ALL); free_irq(host->irq, host); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 7ce12f3e7452..7c302515a6a5 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -198,6 +198,7 @@ struct sdhci_host { int flags; /* Host attributes */ #define SDHCI_USE_DMA (1<<0) /* Host is DMA capable */ #define SDHCI_REQ_USE_DMA (1<<1) /* Use DMA for this req. */ +#define SDHCI_DEVICE_DEAD (1<<2) /* Device unresponsive */ unsigned int max_clk; /* Max possible freq (MHz) */ unsigned int timeout_clk; /* Timeout freq (KHz) */ @@ -239,7 +240,7 @@ static inline void *sdhci_priv(struct sdhci_host *host) } extern int sdhci_add_host(struct sdhci_host *host); -extern void sdhci_remove_host(struct sdhci_host *host); +extern void sdhci_remove_host(struct sdhci_host *host, int dead); #ifdef CONFIG_PM extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state); -- cgit v1.2.3 From fd8c326cadd2f781d5c4d6bcee79bb17b3745bb0 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sat, 24 May 2008 22:36:31 +0200 Subject: mmc_test: add test case control Add the ability to run just a single test case by writing the test case number into the sysfs "test" file. Signed-off-by: Pierre Ossman --- drivers/mmc/card/mmc_test.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index ffadee549a41..371d922d9ee2 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -743,7 +743,7 @@ static const struct mmc_test_case mmc_test_cases[] = { static struct mutex mmc_test_lock; -static void mmc_test_run(struct mmc_test_card *test) +static void mmc_test_run(struct mmc_test_card *test, int testcase) { int i, ret; @@ -753,6 +753,9 @@ static void mmc_test_run(struct mmc_test_card *test) mmc_claim_host(test->card->host); for (i = 0;i < ARRAY_SIZE(mmc_test_cases);i++) { + if (testcase && ((i + 1) != testcase)) + continue; + printk(KERN_INFO "%s: Test case %d. %s...\n", mmc_hostname(test->card->host), i + 1, mmc_test_cases[i].name); @@ -824,9 +827,12 @@ static ssize_t mmc_test_store(struct device *dev, { struct mmc_card *card; struct mmc_test_card *test; + int testcase; card = container_of(dev, struct mmc_card, dev); + testcase = simple_strtol(buf, NULL, 10); + test = kzalloc(sizeof(struct mmc_test_card), GFP_KERNEL); if (!test) return -ENOMEM; @@ -836,7 +842,7 @@ static ssize_t mmc_test_store(struct device *dev, test->buffer = kzalloc(BUFFER_SIZE, GFP_KERNEL); if (test->buffer) { mutex_lock(&mmc_test_lock); - mmc_test_run(test); + mmc_test_run(test, testcase); mutex_unlock(&mmc_test_lock); } -- cgit v1.2.3 From 309d9736a903527d8bc41787b07573a054439bf6 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Wed, 28 May 2008 09:54:50 +0200 Subject: sdhci-pci: unaligned data with ricoh controllers The Ricoh controllers cannot handle unaligned data blocks. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 8554466e0f4e..c0fbf48d9b45 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -91,6 +91,7 @@ static int ricoh_probe(struct sdhci_pci_chip *chip) static const struct sdhci_pci_fixes sdhci_ricoh = { .probe = ricoh_probe, + .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR, }; static const struct sdhci_pci_fixes sdhci_ene_712 = { -- cgit v1.2.3 From 150a55683b6b0ccb66aae75a10a3a514340c7c03 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 20 May 2008 00:57:27 +0300 Subject: include/linux/mmc/mmc.h: remove CVS tags This patch removes a CVS tag that wasn't updated for a long time. Signed-off-by: Adrian Bunk Signed-off-by: Pierre Ossman --- include/linux/mmc/mmc.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 4236fbf0b6fb..14b81f3e5232 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -16,7 +16,6 @@ * Based strongly on code by: * * Author: Yong-iL Joh - * Date : $Date: 2002/06/18 12:37:30 $ * * Author: Andrew Christian * 15 May 2002 -- cgit v1.2.3 From 28f52482b41edc88cdf575aa6ed414c6e116ce10 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 17 Jun 2008 18:17:15 +0400 Subject: mmc: add support for card-detection polling Some hosts (and boards that use mmc_spi) do not use interrupts on the CD line, so they can't trigger mmc_detect_change. We want to poll the card and see if there was a change. 1 second poll interval seems resonable. This patch also implements .get_cd() host operation, that could be used by the hosts that are able to report card-detect status without need to talk MMC. Signed-off-by: Anton Vorontsov Signed-off-by: Pierre Ossman --- drivers/mmc/core/core.c | 12 +++++++++--- include/linux/mmc/host.h | 11 +++++++++++ 2 files changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 01ced4c5a61d..ede5d1e2e20d 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -638,6 +638,9 @@ void mmc_rescan(struct work_struct *work) */ mmc_bus_put(host); + if (host->ops->get_cd && host->ops->get_cd(host) == 0) + goto out; + mmc_claim_host(host); mmc_power_up(host); @@ -652,7 +655,7 @@ void mmc_rescan(struct work_struct *work) if (!err) { if (mmc_attach_sdio(host, ocr)) mmc_power_off(host); - return; + goto out; } /* @@ -662,7 +665,7 @@ void mmc_rescan(struct work_struct *work) if (!err) { if (mmc_attach_sd(host, ocr)) mmc_power_off(host); - return; + goto out; } /* @@ -672,7 +675,7 @@ void mmc_rescan(struct work_struct *work) if (!err) { if (mmc_attach_mmc(host, ocr)) mmc_power_off(host); - return; + goto out; } mmc_release_host(host); @@ -683,6 +686,9 @@ void mmc_rescan(struct work_struct *work) mmc_bus_put(host); } +out: + if (host->caps & MMC_CAP_NEEDS_POLL) + mmc_schedule_delayed_work(&host->detect, HZ); } void mmc_start_host(struct mmc_host *host) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 7ab962fa1d73..6188e19d2331 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -51,8 +51,18 @@ struct mmc_ios { struct mmc_host_ops { void (*request)(struct mmc_host *host, struct mmc_request *req); + /* + * Avoid calling these three functions too often or in a "fast path", + * since underlaying controller might implement them in an expensive + * and/or slow way. + * + * Also note that these functions might sleep, so don't call them + * in the atomic contexts! + */ void (*set_ios)(struct mmc_host *host, struct mmc_ios *ios); int (*get_ro)(struct mmc_host *host); + int (*get_cd)(struct mmc_host *host); + void (*enable_sdio_irq)(struct mmc_host *host, int enable); }; @@ -94,6 +104,7 @@ struct mmc_host { #define MMC_CAP_SD_HIGHSPEED (1 << 3) /* Can do SD high-speed timing */ #define MMC_CAP_SDIO_IRQ (1 << 4) /* Can signal pending SDIO IRQs */ #define MMC_CAP_SPI (1 << 5) /* Talks only SPI protocols */ +#define MMC_CAP_NEEDS_POLL (1 << 6) /* Needs polling for card-detection */ /* host specific block data */ unsigned int max_seg_size; /* see blk_queue_max_segment_size */ -- cgit v1.2.3 From 619ef4b42128709de4d89d209b2c874f560deecd Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 17 Jun 2008 18:17:21 +0400 Subject: mmc_spi: add support for card-detection polling This patch adds new platform data variable "caps", so platforms could pass theirs capabilities into MMC core (for example, platforms without interrupt on the CD line will most probably want to pass MMC_CAP_NEEDS_POLL). New platform get_cd() callback provided to optimize polling. Signed-off-by: Anton Vorontsov Signed-off-by: Pierre Ossman --- drivers/mmc/host/mmc_spi.c | 19 +++++++++++++++++-- include/linux/spi/mmc_spi.h | 9 +++++++++ 2 files changed, 26 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 35508584ac2a..547eb857b1b3 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1131,11 +1131,20 @@ static int mmc_spi_get_ro(struct mmc_host *mmc) return 0; } +static int mmc_spi_get_cd(struct mmc_host *mmc) +{ + struct mmc_spi_host *host = mmc_priv(mmc); + + if (host->pdata && host->pdata->get_cd) + return !!host->pdata->get_cd(mmc->parent); + return -ENOSYS; +} static const struct mmc_host_ops mmc_spi_ops = { .request = mmc_spi_request, .set_ios = mmc_spi_set_ios, .get_ro = mmc_spi_get_ro, + .get_cd = mmc_spi_get_cd, }; @@ -1319,17 +1328,23 @@ static int mmc_spi_probe(struct spi_device *spi) goto fail_glue_init; } + /* pass platform capabilities, if any */ + if (host->pdata) + mmc->caps |= host->pdata->caps; + status = mmc_add_host(mmc); if (status != 0) goto fail_add_host; - dev_info(&spi->dev, "SD/MMC host %s%s%s%s\n", + dev_info(&spi->dev, "SD/MMC host %s%s%s%s%s\n", mmc->class_dev.bus_id, host->dma_dev ? "" : ", no DMA", (host->pdata && host->pdata->get_ro) ? "" : ", no WP", (host->pdata && host->pdata->setpower) - ? "" : ", no poweroff"); + ? "" : ", no poweroff", + (mmc->caps & MMC_CAP_NEEDS_POLL) + ? ", cd polling" : ""); return 0; fail_add_host: diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h index d5ca78b93a3b..a3626aedaec9 100644 --- a/include/linux/spi/mmc_spi.h +++ b/include/linux/spi/mmc_spi.h @@ -23,6 +23,15 @@ struct mmc_spi_platform_data { /* sense switch on sd cards */ int (*get_ro)(struct device *); + /* + * If board does not use CD interrupts, driver can optimize polling + * using this function. + */ + int (*get_cd)(struct device *); + + /* Capabilities to pass into mmc core (e.g. MMC_CAP_NEEDS_POLL). */ + unsigned long caps; + /* how long to debounce card detect, in msecs */ u16 detect_delay; -- cgit v1.2.3 From 08f80bb5196517a0dfe50dc7c10f234c0ff2f0e8 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Tue, 17 Jun 2008 18:17:39 +0400 Subject: mmc: change .get_ro() callback semantics Now get_ro() callback must return 0/1 values for its logical states, and negative errno values in case of error. If particular host instance doesn't support RO/WP switch, it should return -ENOSYS. This patch changes some hosts in two ways: 1. Now functions should be smart to not return negative values in "RO asserted" case (particularly gpio_ calls could return negative values for the outermost GPIOs). Also, board code usually passes get_ro() callbacks that directly return gpioreg & bit result, so at91_mci, imxmmc, pxamci and mmc_spi's get_ro() handlers need take special care when returning platform's values to the mmc core. 2. In case of host instance didn't implement get_ro() callback, it should really return -ENOSYS and let the mmc core decide what to do about it (mmc core thinks the same way as the hosts, so it isn't functional change). Signed-off-by: Anton Vorontsov Signed-off-by: Pierre Ossman --- drivers/mmc/core/sd.c | 4 ++-- drivers/mmc/host/at91_mci.c | 18 +++++++----------- drivers/mmc/host/imxmmc.c | 9 ++++++--- drivers/mmc/host/mmc_spi.c | 9 ++++++--- drivers/mmc/host/pxamci.c | 9 ++++++--- drivers/mmc/host/wbsd.c | 2 +- include/linux/mmc/host.h | 12 ++++++++++++ 7 files changed, 40 insertions(+), 23 deletions(-) diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 7ef3b15c5e3d..b122eb9ea453 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -494,13 +494,13 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, * Check if read-only switch is active. */ if (!oldcard) { - if (!host->ops->get_ro) { + if (!host->ops->get_ro || host->ops->get_ro(host) < 0) { printk(KERN_WARNING "%s: host does not " "support reading read-only " "switch. assuming write-enable.\n", mmc_hostname(host)); } else { - if (host->ops->get_ro(host)) + if (host->ops->get_ro(host) > 0) mmc_card_set_readonly(card); } } diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index 8979ad330a4d..b9d4ed6b29b1 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -793,19 +793,15 @@ static irqreturn_t at91_mmc_det_irq(int irq, void *_host) static int at91_mci_get_ro(struct mmc_host *mmc) { - int read_only = 0; struct at91mci_host *host = mmc_priv(mmc); - if (host->board->wp_pin) { - read_only = gpio_get_value(host->board->wp_pin); - printk(KERN_WARNING "%s: card is %s\n", mmc_hostname(mmc), - (read_only ? "read-only" : "read-write") ); - } - else { - printk(KERN_WARNING "%s: host does not support reading read-only " - "switch. Assuming write-enable.\n", mmc_hostname(mmc)); - } - return read_only; + if (host->board->wp_pin) + return !!gpio_get_value(host->board->wp_pin); + /* + * Board doesn't support read only detection; let the mmc core + * decide what to do. + */ + return -ENOSYS; } static const struct mmc_host_ops at91_mci_ops = { diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c index eed211b2ac70..5e880c0f1349 100644 --- a/drivers/mmc/host/imxmmc.c +++ b/drivers/mmc/host/imxmmc.c @@ -892,9 +892,12 @@ static int imxmci_get_ro(struct mmc_host *mmc) struct imxmci_host *host = mmc_priv(mmc); if (host->pdata && host->pdata->get_ro) - return host->pdata->get_ro(mmc_dev(mmc)); - /* Host doesn't support read only detection so assume writeable */ - return 0; + return !!host->pdata->get_ro(mmc_dev(mmc)); + /* + * Board doesn't support read only detection; let the mmc core + * decide what to do. + */ + return -ENOSYS; } diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 547eb857b1b3..4e82f64a96bc 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1126,9 +1126,12 @@ static int mmc_spi_get_ro(struct mmc_host *mmc) struct mmc_spi_host *host = mmc_priv(mmc); if (host->pdata && host->pdata->get_ro) - return host->pdata->get_ro(mmc->parent); - /* board doesn't support read only detection; assume writeable */ - return 0; + return !!host->pdata->get_ro(mmc->parent); + /* + * Board doesn't support read only detection; let the mmc core + * decide what to do. + */ + return -ENOSYS; } static int mmc_spi_get_cd(struct mmc_host *mmc) diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index d89475d36988..d39f59738866 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -374,9 +374,12 @@ static int pxamci_get_ro(struct mmc_host *mmc) struct pxamci_host *host = mmc_priv(mmc); if (host->pdata && host->pdata->get_ro) - return host->pdata->get_ro(mmc_dev(mmc)); - /* Host doesn't support read only detection so assume writeable */ - return 0; + return !!host->pdata->get_ro(mmc_dev(mmc)); + /* + * Board doesn't support read only detection; let the mmc core + * decide what to do. + */ + return -ENOSYS; } static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index c303e7f57ab4..67e5a9b80f53 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -939,7 +939,7 @@ static int wbsd_get_ro(struct mmc_host *mmc) spin_unlock_bh(&host->lock); - return csr & WBSD_WRPT; + return !!(csr & WBSD_WRPT); } static const struct mmc_host_ops wbsd_ops = { diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 6188e19d2331..753b7231b887 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -58,6 +58,18 @@ struct mmc_host_ops { * * Also note that these functions might sleep, so don't call them * in the atomic contexts! + * + * Return values for the get_ro callback should be: + * 0 for a read/write card + * 1 for a read-only card + * -ENOSYS when not supported (equal to NULL callback) + * or a negative errno value when something bad happened + * + * Return values for the get_ro callback should be: + * 0 for a absent card + * 1 for a present card + * -ENOSYS when not supported (equal to NULL callback) + * or a negative errno value when something bad happened */ void (*set_ios)(struct mmc_host *host, struct mmc_ios *ios); int (*get_ro)(struct mmc_host *host); -- cgit v1.2.3 From 8769392b1918ec70ab62eebc82e06c47c12f8304 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Mon, 16 Jun 2008 19:20:57 -0700 Subject: MMC: Trivial comment cleanup Make the variable name in the comments match the actual name of the variable. Signed-off-by: Deepak Saxena Signed-off-by: Pierre Ossman --- drivers/mmc/core/mmc.c | 2 +- drivers/mmc/core/sd.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 3da29eef8f7d..fdd7c760be8c 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -288,7 +288,7 @@ static struct device_type mmc_type = { /* * Handle the detection and initialisation of a card. * - * In the case of a resume, "curcard" will contain the card + * In the case of a resume, "oldcard" will contain the card * we're trying to reinitialise. */ static int mmc_init_card(struct mmc_host *host, u32 ocr, diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index b122eb9ea453..26fc098d77cd 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -326,7 +326,7 @@ static struct device_type sd_type = { /* * Handle the detection and initialisation of a card. * - * In the case of a resume, "curcard" will contain the card + * In the case of a resume, "oldcard" will contain the card * we're trying to reinitialise. */ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, -- cgit v1.2.3 From 80f9254668c63ae73c1359d8de50ad94aa1aa94a Mon Sep 17 00:00:00 2001 From: Marc Pignat Date: Fri, 30 May 2008 14:05:24 +0200 Subject: mmc: at91_mci: support for block size not modulo 4 Implement transfer with size not modulo 4 for at91sam9*. Please note that the at91rm9200 simply can't handle this. Signed-off-by: Marc Pignat Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- drivers/mmc/host/at91_mci.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index b9d4ed6b29b1..e40340f32e35 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -233,11 +233,11 @@ static void at91_mci_pre_dma_read(struct at91mci_host *host) if (i == 0) { at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address); - at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4); + at91_mci_write(host, ATMEL_PDC_RCR, (data->blksz & 0x3) ? sg->length : sg->length / 4); } else { at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address); - at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4); + at91_mci_write(host, ATMEL_PDC_RNCR, (data->blksz & 0x3) ? sg->length : sg->length / 4); } } @@ -430,7 +430,7 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command if (data) { - if ( data->blksz & 0x3 ) { + if ( cpu_is_at91rm9200() && (data->blksz & 0x3) ) { pr_debug("Unsupported block size\n"); cmd->error = -EINVAL; mmc_request_done(host->mmc, host->request); @@ -482,7 +482,10 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command } else { /* zero block length and PDC mode */ mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff; - at91_mci_write(host, AT91_MCI_MR, mr | (block_length << 16) | AT91_MCI_PDCMODE); + mr |= (data->blksz & 0x3) ? AT91_MCI_PDCFBYTE : 0; + mr |= (block_length << 16); + mr |= AT91_MCI_PDCMODE; + at91_mci_write(host, AT91_MCI_MR, mr); /* * Disable the PDC controller @@ -517,7 +520,9 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command pr_debug("Transmitting %d bytes\n", host->total_length); at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address); - at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4); + at91_mci_write(host, ATMEL_PDC_TCR, (data->blksz & 0x3) ? + host->total_length : host->total_length / 4); + ier = AT91_MCI_CMDRDY; } } -- cgit v1.2.3 From e181dce8acab4f7d7c4772d2a8281510d503ab21 Mon Sep 17 00:00:00 2001 From: Marc Pignat Date: Fri, 30 May 2008 14:06:32 +0200 Subject: mmc: at91_mci: show timeouts Detect command timeout (or mci controller hangs). Signed-off-by: Marc Pignat Signed-off-by: Hans J Koch Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- drivers/mmc/host/at91_mci.c | 35 +++++++++++++++++++++++++++++++++-- 1 file changed, 33 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index e40340f32e35..fce171c7c67e 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -125,8 +125,33 @@ struct at91mci_host /* Latest in the scatterlist that has been enabled for transfer */ int transfer_index; + + /* Timer for timeouts */ + struct timer_list timer; }; +static void at91_timeout_timer(unsigned long data) +{ + struct at91mci_host *host; + + host = (struct at91mci_host *)data; + + if (host->request) { + dev_err(host->mmc->parent, "Timeout waiting end of packet\n"); + + if (host->cmd && host->cmd->data) { + host->cmd->data->error = -ETIMEDOUT; + } else { + if (host->cmd) + host->cmd->error = -ETIMEDOUT; + else + host->request->cmd->error = -ETIMEDOUT; + } + + mmc_request_done(host->mmc, host->request); + } +} + /* * Copy from sg to a dma block - used for transfers */ @@ -557,9 +582,10 @@ static void at91_mci_process_next(struct at91mci_host *host) else if ((!(host->flags & FL_SENT_STOP)) && host->request->stop) { host->flags |= FL_SENT_STOP; at91_mci_send_command(host, host->request->stop); - } - else + } else { + del_timer(&host->timer); mmc_request_done(host->mmc, host->request); + } } /* @@ -618,6 +644,8 @@ static void at91_mci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->request = mrq; host->flags = 0; + mod_timer(&host->timer, jiffies + HZ); + at91_mci_process_next(host); } @@ -936,6 +964,8 @@ static int __init at91_mci_probe(struct platform_device *pdev) mmc_add_host(mmc); + setup_timer(&host->timer, at91_timeout_timer, (unsigned long)host); + /* * monitor card insertion/removal if we can */ @@ -996,6 +1026,7 @@ static int __exit at91_mci_remove(struct platform_device *pdev) } at91_mci_disable(host); + del_timer_sync(&host->timer); mmc_remove_host(mmc); free_irq(host->irq, host); -- cgit v1.2.3 From c5a89c6c0805959f813e8342d6f4040860f6d7db Mon Sep 17 00:00:00 2001 From: Marc Pignat Date: Fri, 30 May 2008 14:07:47 +0200 Subject: mmc: at91_mci: avoid timeouts The at91 mci controller internal state machine seems to often crash. This can be fixed by resetting the controller after each command for at91rm9200 and by setting the MCI_BLKR register on at91sam926*. Signed-off-by: Marc Pignat Signed-off-by: Hans J Koch Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- drivers/mmc/host/at91_mci.c | 48 ++++++++++++++++++++++++++++++++++++ include/asm-arm/arch-at91/at91_mci.h | 4 +++ 2 files changed, 52 insertions(+) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index fce171c7c67e..e9242110ce2e 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -130,6 +130,43 @@ struct at91mci_host struct timer_list timer; }; +/* + * Reset the controller and restore most of the state + */ +static void at91_reset_host(struct at91mci_host *host) +{ + unsigned long flags; + u32 mr; + u32 sdcr; + u32 dtor; + u32 imr; + + local_irq_save(flags); + imr = at91_mci_read(host, AT91_MCI_IMR); + + at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); + + /* save current state */ + mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff; + sdcr = at91_mci_read(host, AT91_MCI_SDCR); + dtor = at91_mci_read(host, AT91_MCI_DTOR); + + /* reset the controller */ + at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIDIS | AT91_MCI_SWRST); + + /* restore state */ + at91_mci_write(host, AT91_MCI_CR, AT91_MCI_MCIEN); + at91_mci_write(host, AT91_MCI_MR, mr); + at91_mci_write(host, AT91_MCI_SDCR, sdcr); + at91_mci_write(host, AT91_MCI_DTOR, dtor); + at91_mci_write(host, AT91_MCI_IER, imr); + + /* make sure sdio interrupts will fire */ + at91_mci_read(host, AT91_MCI_SR); + + local_irq_restore(flags); +} + static void at91_timeout_timer(unsigned long data) { struct at91mci_host *host; @@ -148,6 +185,7 @@ static void at91_timeout_timer(unsigned long data) host->request->cmd->error = -ETIMEDOUT; } + at91_reset_host(host); mmc_request_done(host->mmc, host->request); } } @@ -512,6 +550,11 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command mr |= AT91_MCI_PDCMODE; at91_mci_write(host, AT91_MCI_MR, mr); + if (!cpu_is_at91rm9200()) + at91_mci_write(host, AT91_MCI_BLKR, + AT91_MCI_BLKR_BCNT(blocks) | + AT91_MCI_BLKR_BLKLEN(block_length)); + /* * Disable the PDC controller */ @@ -584,6 +627,11 @@ static void at91_mci_process_next(struct at91mci_host *host) at91_mci_send_command(host, host->request->stop); } else { del_timer(&host->timer); + /* the at91rm9200 mci controller hangs after some transfers, + * and the workaround is to reset it after each transfer. + */ + if (cpu_is_at91rm9200()) + at91_reset_host(host); mmc_request_done(host->mmc, host->request); } } diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h index 1551fc24eb43..400ec10014b4 100644 --- a/include/asm-arm/arch-at91/at91_mci.h +++ b/include/asm-arm/arch-at91/at91_mci.h @@ -75,6 +75,10 @@ #define AT91_MCI_TRTYP_MULTIPLE (1 << 19) #define AT91_MCI_TRTYP_STREAM (2 << 19) +#define AT91_MCI_BLKR 0x18 /* Block Register */ +#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */ +#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block lenght */ + #define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */ #define AT91_MCR_RDR 0x30 /* Receive Data Register */ #define AT91_MCR_TDR 0x34 /* Transmit Data Register */ -- cgit v1.2.3 From 4ac24a8722b97d5b4cfc48a4fbd0b2489e358d4d Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 30 May 2008 14:18:57 +0200 Subject: mmc: at91_mci: update bytes_xfered value once xfer done Modify bytes_xfered value after a write. That will report, as accurately as possible, the amount of sectors that are effectively written. This update introduces the check of the busy signal given by the card. Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- drivers/mmc/host/at91_mci.c | 40 ++++++++++++++++++++++++++++++++++------ 1 file changed, 34 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index e9242110ce2e..b5a6e250fc1a 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -340,8 +340,6 @@ static void at91_mci_post_dma_read(struct at91mci_host *host) dma_unmap_page(NULL, sg->dma_address, sg->length, DMA_FROM_DEVICE); - data->bytes_xfered += sg->length; - if (cpu_is_at91rm9200()) { /* AT91RM9200 errata */ unsigned int *buffer; int index; @@ -357,6 +355,8 @@ static void at91_mci_post_dma_read(struct at91mci_host *host) } flush_dcache_page(sg_page(sg)); + + data->bytes_xfered += sg->length; } /* Is there another transfer to trigger? */ @@ -397,10 +397,32 @@ static void at91_mci_handle_transmitted(struct at91mci_host *host) at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE); } else at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY); +} + +/* + * Update bytes tranfered count during a write operation + */ +static void at91_mci_update_bytes_xfered(struct at91mci_host *host) +{ + struct mmc_data *data; - data->bytes_xfered = host->total_length; + /* always deal with the effective request (and not the current cmd) */ + + if (host->request->cmd && host->request->cmd->error != 0) + return; + + if (host->request->data) { + data = host->request->data; + if (data->flags & MMC_DATA_WRITE) { + /* card is in IDLE mode now */ + pr_debug("-> bytes_xfered %d, total_length = %d\n", + data->bytes_xfered, host->total_length); + data->bytes_xfered = host->total_length; + } + } } + /*Handle after command sent ready*/ static int at91_mci_handle_cmdrdy(struct at91mci_host *host) { @@ -413,8 +435,7 @@ static int at91_mci_handle_cmdrdy(struct at91mci_host *host) } else return 1; } else if (host->cmd->data->flags & MMC_DATA_WRITE) { /*After sendding multi-block-write command, start DMA transfer*/ - at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE); - at91_mci_write(host, AT91_MCI_IER, AT91_MCI_BLKE); + at91_mci_write(host, AT91_MCI_IER, AT91_MCI_TXBUFE | AT91_MCI_BLKE); at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); } @@ -817,6 +838,7 @@ static irqreturn_t at91_mci_irq(int irq, void *devid) if (int_status & AT91_MCI_NOTBUSY) { pr_debug("Card is ready\n"); + at91_mci_update_bytes_xfered(host); completed = 1; } @@ -825,7 +847,13 @@ static irqreturn_t at91_mci_irq(int irq, void *devid) if (int_status & AT91_MCI_BLKE) { pr_debug("Block transfer has ended\n"); - completed = 1; + if (host->request->data && host->request->data->blocks > 1) { + /* multi block write : complete multi write + * command and send stop */ + completed = 1; + } else { + at91_mci_write(host, AT91_MCI_IER, AT91_MCI_NOTBUSY); + } } if (int_status & AT91_MCI_TXRDY) -- cgit v1.2.3 From 3eb99a7bff3d7459a695f45124a6bbabf31cb4b5 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 30 May 2008 14:08:56 +0200 Subject: mmc: at91_mci: add multiwrite switch at91_mci is capable of multiwrite. Enable it before it disappears. Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- drivers/mmc/host/at91_mci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index b5a6e250fc1a..b2bb79e74eaa 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -947,6 +947,7 @@ static int __init at91_mci_probe(struct platform_device *pdev) mmc->f_min = 375000; mmc->f_max = 25000000; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps = MMC_CAP_MULTIWRITE; mmc->max_blk_size = 4095; mmc->max_blk_count = mmc->max_req_size; -- cgit v1.2.3 From 7a6588ba20aed4505da912f9dd73616e9bd9ba67 Mon Sep 17 00:00:00 2001 From: Eric Benard Date: Fri, 30 May 2008 14:26:05 +0200 Subject: mmc: at91_mci: add sdio irq management Enable SDIO interrupt handling. Signed-off-by: Eric Benard Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- drivers/mmc/host/at91_mci.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index b2bb79e74eaa..9b546a97aa44 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -665,7 +665,7 @@ static void at91_mci_completed_command(struct at91mci_host *host) struct mmc_command *cmd = host->cmd; unsigned int status; - at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); + at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); cmd->resp[0] = at91_mci_read(host, AT91_MCI_RSPR(0)); cmd->resp[1] = at91_mci_read(host, AT91_MCI_RSPR(1)); @@ -856,6 +856,12 @@ static irqreturn_t at91_mci_irq(int irq, void *devid) } } + if (int_status & AT91_MCI_SDIOIRQA) + mmc_signal_sdio_irq(host->mmc); + + if (int_status & AT91_MCI_SDIOIRQB) + mmc_signal_sdio_irq(host->mmc); + if (int_status & AT91_MCI_TXRDY) pr_debug("Ready to transmit\n"); @@ -870,10 +876,10 @@ static irqreturn_t at91_mci_irq(int irq, void *devid) if (completed) { pr_debug("Completed command\n"); - at91_mci_write(host, AT91_MCI_IDR, 0xffffffff); + at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); at91_mci_completed_command(host); } else - at91_mci_write(host, AT91_MCI_IDR, int_status); + at91_mci_write(host, AT91_MCI_IDR, int_status & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); return IRQ_HANDLED; } @@ -913,10 +919,22 @@ static int at91_mci_get_ro(struct mmc_host *mmc) return -ENOSYS; } +static void at91_mci_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct at91mci_host *host = mmc_priv(mmc); + + pr_debug("%s: sdio_irq %c : %s\n", mmc_hostname(host->mmc), + host->board->slot_b ? 'B':'A', enable ? "enable" : "disable"); + at91_mci_write(host, enable ? AT91_MCI_IER : AT91_MCI_IDR, + host->board->slot_b ? AT91_MCI_SDIOIRQB : AT91_MCI_SDIOIRQA); + +} + static const struct mmc_host_ops at91_mci_ops = { .request = at91_mci_request, .set_ios = at91_mci_set_ios, .get_ro = at91_mci_get_ro, + .enable_sdio_irq = at91_mci_enable_sdio_irq, }; /* @@ -947,7 +965,7 @@ static int __init at91_mci_probe(struct platform_device *pdev) mmc->f_min = 375000; mmc->f_max = 25000000; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps = MMC_CAP_MULTIWRITE; + mmc->caps = MMC_CAP_MULTIWRITE | MMC_CAP_SDIO_IRQ; mmc->max_blk_size = 4095; mmc->max_blk_count = mmc->max_req_size; -- cgit v1.2.3 From ba7deeed96ca1855c153ad81c45baf6efe1a3362 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 30 May 2008 14:28:45 +0200 Subject: mmc: at91_mci: do not read irq status twice as it will forget some errors Reading AT91_MCI_SR again at the end of transfer can corrupt the error reporting. Some fields in the SR register are read-and-clear. Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- drivers/mmc/host/at91_mci.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index 9b546a97aa44..e1f91a42d521 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -660,10 +660,9 @@ static void at91_mci_process_next(struct at91mci_host *host) /* * Handle a command that has been completed */ -static void at91_mci_completed_command(struct at91mci_host *host) +static void at91_mci_completed_command(struct at91mci_host *host, unsigned int status) { struct mmc_command *cmd = host->cmd; - unsigned int status; at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); @@ -677,10 +676,9 @@ static void at91_mci_completed_command(struct at91mci_host *host) host->buffer = NULL; } - status = at91_mci_read(host, AT91_MCI_SR); - - pr_debug("Status = %08X [%08X %08X %08X %08X]\n", - status, cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); + pr_debug("Status = %08X/%08x [%08X %08X %08X %08X]\n", + status, at91_mci_read(host, AT91_MCI_SR), + cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]); if (status & AT91_MCI_ERRORS) { if ((status & AT91_MCI_RCRCE) && !(mmc_resp_type(cmd) & MMC_RSP_CRC)) { @@ -877,7 +875,7 @@ static irqreturn_t at91_mci_irq(int irq, void *devid) if (completed) { pr_debug("Completed command\n"); at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); - at91_mci_completed_command(host); + at91_mci_completed_command(host, int_status); } else at91_mci_write(host, AT91_MCI_IDR, int_status & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); -- cgit v1.2.3 From fa1fe010c126ee69f2f75e3a4efc2f6252281ff8 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 10 Jun 2008 11:27:29 +0200 Subject: at91_mci: manage cmd error and data error independently In at91_mci_completed_command() function, this patch distinguishes command error and data error. It reports it in the corresponding error field. Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- drivers/mmc/host/at91_mci.c | 27 +++++++++++++++++++-------- 1 file changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index e1f91a42d521..e4d018b2fe9f 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -663,6 +663,7 @@ static void at91_mci_process_next(struct at91mci_host *host) static void at91_mci_completed_command(struct at91mci_host *host, unsigned int status) { struct mmc_command *cmd = host->cmd; + struct mmc_data *data = cmd->data; at91_mci_write(host, AT91_MCI_IDR, 0xffffffff & ~(AT91_MCI_SDIOIRQA | AT91_MCI_SDIOIRQB)); @@ -685,15 +686,25 @@ static void at91_mci_completed_command(struct at91mci_host *host, unsigned int s cmd->error = 0; } else { - if (status & (AT91_MCI_RTOE | AT91_MCI_DTOE)) - cmd->error = -ETIMEDOUT; - else if (status & (AT91_MCI_RCRCE | AT91_MCI_DCRCE)) - cmd->error = -EILSEQ; - else - cmd->error = -EIO; + if (status & (AT91_MCI_DTOE | AT91_MCI_DCRCE)) { + if (data) { + if (status & AT91_MCI_DTOE) + data->error = -ETIMEDOUT; + else if (status & AT91_MCI_DCRCE) + data->error = -EILSEQ; + } + } else { + if (status & AT91_MCI_RTOE) + cmd->error = -ETIMEDOUT; + else if (status & AT91_MCI_RCRCE) + cmd->error = -EILSEQ; + else + cmd->error = -EIO; + } - pr_debug("Error detected and set to %d (cmd = %d, retries = %d)\n", - cmd->error, cmd->opcode, cmd->retries); + pr_debug("Error detected and set to %d/%d (cmd = %d, retries = %d)\n", + cmd->error, data ? data->error : 0, + cmd->opcode, cmd->retries); } } else -- cgit v1.2.3 From 5385edc50063a2175383ef5e90aa67fb6ab1beae Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Sat, 14 Jun 2008 20:27:20 +0300 Subject: at91_mci: AT91SAM9260/9263 12 byte write erratum (v2) AT91SAM926[0/3] PDC must write at least 12 bytes. The code compiles and runs but the actual condition for this erratum did not trigger in my tests so it's unclear if it actually works as intended. Signed-off-by: Ville Syrjala Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- drivers/mmc/host/at91_mci.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index e4d018b2fe9f..d3e96ff41428 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -198,9 +198,14 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data unsigned int len, i, size; unsigned *dmabuf = host->buffer; - size = host->total_length; + size = data->blksz * data->blocks; len = data->sg_len; + /* AT91SAM926[0/3] Data Write Operation and number of bytes erratum */ + if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) + if (host->total_length == 12) + memset(dmabuf, 0, 12); + /* * Just loop through all entries. Size might not * be the entire list though so make sure that @@ -222,9 +227,10 @@ static inline void at91_mci_sg_to_dma(struct at91mci_host *host, struct mmc_data for (index = 0; index < (amount / 4); index++) *dmabuf++ = swab32(sgbuffer[index]); - } - else + } else { memcpy(dmabuf, sgbuffer, amount); + dmabuf += amount; + } kunmap_atomic(sgbuffer, KM_BIO_SRC_IRQ); @@ -417,7 +423,7 @@ static void at91_mci_update_bytes_xfered(struct at91mci_host *host) /* card is in IDLE mode now */ pr_debug("-> bytes_xfered %d, total_length = %d\n", data->bytes_xfered, host->total_length); - data->bytes_xfered = host->total_length; + data->bytes_xfered = data->blksz * data->blocks; } } } @@ -600,6 +606,13 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command * Handle a write */ host->total_length = block_length * blocks; + /* + * AT91SAM926[0/3] Data Write Operation and + * number of bytes erratum + */ + if (cpu_is_at91sam9260 () || cpu_is_at91sam9263()) + if (host->total_length < 12) + host->total_length = 12; host->buffer = dma_alloc_coherent(NULL, host->total_length, &host->physical_address, GFP_KERNEL); -- cgit v1.2.3 From 9da3cbaf2881df97e502593c49c93f55eb696091 Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Mon, 9 Jun 2008 22:06:44 +0300 Subject: at91_mci: Cover more AT91RM9200 and AT91SAM9261 errata. According to the documentation the AT91SAM9261 MCI shares the block size limitations of the AT91RM9200 MCI. Also the errata documentation for AT91RM9200 and AT91SAM9261 state that stream commands are not supported. This has not been tested on actual hardware. Signed-off-by: Ville Syrjala Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- drivers/mmc/host/at91_mci.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index d3e96ff41428..f8c3f7c330e3 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -520,11 +520,19 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command if (data) { - if ( cpu_is_at91rm9200() && (data->blksz & 0x3) ) { - pr_debug("Unsupported block size\n"); - cmd->error = -EINVAL; - mmc_request_done(host->mmc, host->request); - return; + if (cpu_is_at91rm9200() || cpu_is_at91sam9261()) { + if (data->blksz & 0x3) { + pr_debug("Unsupported block size\n"); + cmd->error = -EINVAL; + mmc_request_done(host->mmc, host->request); + return; + } + if (data->flags & MMC_DATA_STREAM) { + pr_debug("Stream commands not supported\n"); + cmd->error = -EINVAL; + mmc_request_done(host->mmc, host->request); + return; + } } block_length = data->blksz; @@ -577,7 +585,7 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command mr |= AT91_MCI_PDCMODE; at91_mci_write(host, AT91_MCI_MR, mr); - if (!cpu_is_at91rm9200()) + if (!(cpu_is_at91rm9200() || cpu_is_at91sam9261())) at91_mci_write(host, AT91_MCI_BLKR, AT91_MCI_BLKR_BCNT(blocks) | AT91_MCI_BLKR_BLKLEN(block_length)); -- cgit v1.2.3 From 12bd257532708a4d5be4b8548ff121a45ff88f5d Mon Sep 17 00:00:00 2001 From: Ville Syrjala Date: Mon, 9 Jun 2008 22:06:45 +0300 Subject: at91_mci: Fix byte mode transitions. The byte mode support fails to clear the byte mode bit in the command register, possibly leaving byte mode enabled with the counters programmed in non-byte mode. Signed-off-by: Ville Syrjala Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- drivers/mmc/host/at91_mci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index f8c3f7c330e3..16df235fcc2e 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -579,7 +579,7 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command ier = AT91_MCI_CMDRDY; } else { /* zero block length and PDC mode */ - mr = at91_mci_read(host, AT91_MCI_MR) & 0x7fff; + mr = at91_mci_read(host, AT91_MCI_MR) & 0x5fff; mr |= (data->blksz & 0x3) ? AT91_MCI_PDCFBYTE : 0; mr |= (block_length << 16); mr |= AT91_MCI_PDCMODE; -- cgit v1.2.3 From c4223c2c91fa9e5addd6eadd804e57a925ac5e5e Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Mon, 9 Jun 2008 08:36:13 +0200 Subject: au1xmmc: remove db1200 board code, rewrite probe. Remove the DB1200 board-specific functions (card present, read-only, activity LED methods) and instead add platform data which is passed to the driver. This also allows for platforms to implement other carddetect schemes (e.g. dedicated irq) without having to pollute the driver code. The poll timer (used for pb1200) is kept for compatibility. With the board-specific stuff gone, the driver's ->probe() code can be cleaned up considerably. Signed-off-by: Manuel Lauss Signed-off-by: Pierre Ossman --- drivers/mmc/host/au1xmmc.c | 573 ++++++++++++++++++------------ drivers/mmc/host/au1xmmc.h | 9 +- include/asm-mips/mach-au1x00/au1100_mmc.h | 18 +- 3 files changed, 354 insertions(+), 246 deletions(-) diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index cc5f7bc546af..d8776d61b3cc 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -41,8 +41,9 @@ #include #include #include - +#include #include + #include #include #include @@ -54,6 +55,7 @@ #define DRIVER_NAME "au1xxx-mmc" /* Set this to enable special debugging macros */ +/* #define DEBUG */ #ifdef DEBUG #define DBG(fmt, idx, args...) printk("au1xx(%d): DEBUG: " fmt, idx, ##args) @@ -61,32 +63,6 @@ #define DBG(fmt, idx, args...) #endif -const struct { - u32 iobase; - u32 tx_devid, rx_devid; - u16 bcsrpwr; - u16 bcsrstatus; - u16 wpstatus; -} au1xmmc_card_table[] = { - { SD0_BASE, DSCR_CMD0_SDMS_TX0, DSCR_CMD0_SDMS_RX0, - BCSR_BOARD_SD0PWR, BCSR_INT_SD0INSERT, BCSR_STATUS_SD0WP }, -#ifndef CONFIG_MIPS_DB1200 - { SD1_BASE, DSCR_CMD0_SDMS_TX1, DSCR_CMD0_SDMS_RX1, - BCSR_BOARD_DS1PWR, BCSR_INT_SD1INSERT, BCSR_STATUS_SD1WP } -#endif -}; - -#define AU1XMMC_CONTROLLER_COUNT (ARRAY_SIZE(au1xmmc_card_table)) - -/* This array stores pointers for the hosts (used by the IRQ handler) */ -struct au1xmmc_host *au1xmmc_hosts[AU1XMMC_CONTROLLER_COUNT]; -static int dma = 1; - -#ifdef MODULE -module_param(dma, bool, 0); -MODULE_PARM_DESC(dma, "Use DMA engine for data transfers (0 = disabled)"); -#endif - static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask) { u32 val = au_readl(HOST_CONFIG(host)); @@ -135,26 +111,33 @@ static inline void SEND_STOP(struct au1xmmc_host *host) static void au1xmmc_set_power(struct au1xmmc_host *host, int state) { - - u32 val = au1xmmc_card_table[host->id].bcsrpwr; - - bcsr->board &= ~val; - if (state) bcsr->board |= val; - - au_sync_delay(1); + if (host->platdata && host->platdata->set_power) + host->platdata->set_power(host->mmc, state); } -static inline int au1xmmc_card_inserted(struct au1xmmc_host *host) +static int au1xmmc_card_inserted(struct au1xmmc_host *host) { - return (bcsr->sig_status & au1xmmc_card_table[host->id].bcsrstatus) - ? 1 : 0; + int ret; + + if (host->platdata && host->platdata->card_inserted) + ret = host->platdata->card_inserted(host->mmc); + else + ret = 1; /* assume there is a card */ + + return ret; } static int au1xmmc_card_readonly(struct mmc_host *mmc) { struct au1xmmc_host *host = mmc_priv(mmc); - return (bcsr->status & au1xmmc_card_table[host->id].wpstatus) - ? 1 : 0; + int ret; + + if (host->platdata && host->platdata->card_readonly) + ret = host->platdata->card_readonly(mmc); + else + ret = 0; /* assume card is read-write */ + + return ret; } static void au1xmmc_finish_request(struct au1xmmc_host *host) @@ -163,7 +146,7 @@ static void au1xmmc_finish_request(struct au1xmmc_host *host) struct mmc_request *mrq = host->mrq; host->mrq = NULL; - host->flags &= HOST_F_ACTIVE; + host->flags &= HOST_F_ACTIVE | HOST_F_DMA; host->dma.len = 0; host->dma.dir = 0; @@ -174,8 +157,6 @@ static void au1xmmc_finish_request(struct au1xmmc_host *host) host->status = HOST_S_IDLE; - bcsr->disk_leds |= (1 << 8); - mmc_request_done(host->mmc, mrq); } @@ -299,11 +280,13 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) if (!data->error) { if (host->flags & HOST_F_DMA) { +#ifdef CONFIG_SOC_AU1200 /* DBDMA */ u32 chan = DMA_CHANNEL(host); chan_tab_t *c = *((chan_tab_t **) chan); au1x_dma_chan_t *cp = c->chan_ptr; data->bytes_xfered = cp->ddma_bytecnt; +#endif } else data->bytes_xfered = @@ -420,18 +403,18 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host) break; if (status & SD_STATUS_RC) { - DBG("RX CRC Error [%d + %d].\n", host->id, + DBG("RX CRC Error [%d + %d].\n", host->pdev->id, host->pio.len, count); break; } if (status & SD_STATUS_RO) { - DBG("RX Overrun [%d + %d]\n", host->id, + DBG("RX Overrun [%d + %d]\n", host->pdev->id, host->pio.len, count); break; } else if (status & SD_STATUS_RU) { - DBG("RX Underrun [%d + %d]\n", host->id, + DBG("RX Underrun [%d + %d]\n", host->pdev->id, host->pio.len, count); break; } @@ -528,6 +511,7 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) host->status = HOST_S_DATA; if (host->flags & HOST_F_DMA) { +#ifdef CONFIG_SOC_AU1200 /* DBDMA */ u32 channel = DMA_CHANNEL(host); /* Start the DMA as soon as the buffer gets something in it */ @@ -540,6 +524,7 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) } au1xxx_dbdma_start(channel); +#endif } } @@ -571,12 +556,8 @@ static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate) static int au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) { - int datalen = data->blocks * data->blksz; - if (dma != 0) - host->flags |= HOST_F_DMA; - if (data->flags & MMC_DATA_READ) host->flags |= HOST_F_RECV; else @@ -596,6 +577,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) au_writel(data->blksz - 1, HOST_BLKSIZE(host)); if (host->flags & HOST_F_DMA) { +#ifdef CONFIG_SOC_AU1200 /* DBDMA */ int i; u32 channel = DMA_CHANNEL(host); @@ -621,11 +603,12 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) len, flags); } - if (!ret) + if (!ret) goto dataerr; datalen -= len; } +#endif } else { host->pio.index = 0; @@ -641,8 +624,9 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) return 0; - dataerr: - dma_unmap_sg(mmc_dev(host->mmc),data->sg,data->sg_len,host->dma.dir); +dataerr: + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + host->dma.dir); return -ETIMEDOUT; } @@ -663,8 +647,6 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq) host->mrq = mrq; host->status = HOST_S_CMD; - bcsr->disk_leds &= ~(1 << 8); - if (mrq->data) { FLUSH_FIFO(host); flags = mrq->data->flags; @@ -728,149 +710,145 @@ static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios) } } -static void au1xmmc_dma_callback(int irq, void *dev_id) -{ - struct au1xmmc_host *host = (struct au1xmmc_host *) dev_id; - - /* Avoid spurious interrupts */ - - if (!host->mrq) - return; - - if (host->flags & HOST_F_STOP) - SEND_STOP(host); - - tasklet_schedule(&host->data_task); -} - #define STATUS_TIMEOUT (SD_STATUS_RAT | SD_STATUS_DT) #define STATUS_DATA_IN (SD_STATUS_NE) #define STATUS_DATA_OUT (SD_STATUS_TH) static irqreturn_t au1xmmc_irq(int irq, void *dev_id) { - + struct au1xmmc_host *host = dev_id; u32 status; - int i, ret = 0; - - disable_irq(AU1100_SD_IRQ); - for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) { - struct au1xmmc_host * host = au1xmmc_hosts[i]; - u32 handled = 1; - - status = au_readl(HOST_STATUS(host)); + status = au_readl(HOST_STATUS(host)); - if (host->mrq && (status & STATUS_TIMEOUT)) { - if (status & SD_STATUS_RAT) - host->mrq->cmd->error = -ETIMEDOUT; + if (!(status & SD_STATUS_I)) + return IRQ_NONE; /* not ours */ - else if (status & SD_STATUS_DT) - host->mrq->data->error = -ETIMEDOUT; + if (host->mrq && (status & STATUS_TIMEOUT)) { + if (status & SD_STATUS_RAT) + host->mrq->cmd->error = -ETIMEDOUT; + else if (status & SD_STATUS_DT) + host->mrq->data->error = -ETIMEDOUT; - /* In PIO mode, interrupts might still be enabled */ - IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH); + /* In PIO mode, interrupts might still be enabled */ + IRQ_OFF(host, SD_CONFIG_NE | SD_CONFIG_TH); - //IRQ_OFF(host, SD_CONFIG_TH|SD_CONFIG_RA|SD_CONFIG_RF); - tasklet_schedule(&host->finish_task); - } + /* IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA | SD_CONFIG_RF); */ + tasklet_schedule(&host->finish_task); + } #if 0 - else if (status & SD_STATUS_DD) { - - /* Sometimes we get a DD before a NE in PIO mode */ - - if (!(host->flags & HOST_F_DMA) && - (status & SD_STATUS_NE)) - au1xmmc_receive_pio(host); - else { - au1xmmc_data_complete(host, status); - //tasklet_schedule(&host->data_task); - } - } -#endif - else if (status & (SD_STATUS_CR)) { - if (host->status == HOST_S_CMD) - au1xmmc_cmd_complete(host,status); - } - else if (!(host->flags & HOST_F_DMA)) { - if ((host->flags & HOST_F_XMIT) && - (status & STATUS_DATA_OUT)) - au1xmmc_send_pio(host); - else if ((host->flags & HOST_F_RECV) && - (status & STATUS_DATA_IN)) - au1xmmc_receive_pio(host); - } - else if (status & 0x203FBC70) { - DBG("Unhandled status %8.8x\n", host->id, status); - handled = 0; + else if (status & SD_STATUS_DD) { + /* Sometimes we get a DD before a NE in PIO mode */ + if (!(host->flags & HOST_F_DMA) && (status & SD_STATUS_NE)) + au1xmmc_receive_pio(host); + else { + au1xmmc_data_complete(host, status); + /* tasklet_schedule(&host->data_task); */ } - - au_writel(status, HOST_STATUS(host)); - au_sync(); - - ret |= handled; } - - enable_irq(AU1100_SD_IRQ); - return ret; -} - -static void au1xmmc_poll_event(unsigned long arg) -{ - struct au1xmmc_host *host = (struct au1xmmc_host *) arg; - - int card = au1xmmc_card_inserted(host); - int controller = (host->flags & HOST_F_ACTIVE) ? 1 : 0; - - if (card != controller) { - host->flags &= ~HOST_F_ACTIVE; - if (card) host->flags |= HOST_F_ACTIVE; - mmc_detect_change(host->mmc, 0); +#endif + else if (status & SD_STATUS_CR) { + if (host->status == HOST_S_CMD) + au1xmmc_cmd_complete(host, status); + + } else if (!(host->flags & HOST_F_DMA)) { + if ((host->flags & HOST_F_XMIT) && (status & STATUS_DATA_OUT)) + au1xmmc_send_pio(host); + else if ((host->flags & HOST_F_RECV) && (status & STATUS_DATA_IN)) + au1xmmc_receive_pio(host); + + } else if (status & 0x203F3C70) { + DBG("Unhandled status %8.8x\n", host->pdev->id, + status); } - if (host->mrq != NULL) { - u32 status = au_readl(HOST_STATUS(host)); - DBG("PENDING - %8.8x\n", host->id, status); - } + au_writel(status, HOST_STATUS(host)); + au_sync(); - mod_timer(&host->timer, jiffies + AU1XMMC_DETECT_TIMEOUT); + return IRQ_HANDLED; } -static dbdev_tab_t au1xmmc_mem_dbdev = -{ - DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 8, 0x00000000, 0, 0 +#ifdef CONFIG_SOC_AU1200 +/* 8bit memory DMA device */ +static dbdev_tab_t au1xmmc_mem_dbdev = { + .dev_id = DSCR_CMD0_ALWAYS, + .dev_flags = DEV_FLAGS_ANYUSE, + .dev_tsize = 0, + .dev_devwidth = 8, + .dev_physaddr = 0x00000000, + .dev_intlevel = 0, + .dev_intpolarity = 0, }; +static int memid; -static void au1xmmc_init_dma(struct au1xmmc_host *host) +static void au1xmmc_dbdma_callback(int irq, void *dev_id) { + struct au1xmmc_host *host = (struct au1xmmc_host *)dev_id; - u32 rxchan, txchan; + /* Avoid spurious interrupts */ + if (!host->mrq) + return; - int txid = au1xmmc_card_table[host->id].tx_devid; - int rxid = au1xmmc_card_table[host->id].rx_devid; + if (host->flags & HOST_F_STOP) + SEND_STOP(host); - /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride - of 8 bits. And since devices are shared, we need to create - our own to avoid freaking out other devices - */ + tasklet_schedule(&host->data_task); +} - int memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev); +static int au1xmmc_dbdma_init(struct au1xmmc_host *host) +{ + struct resource *res; + int txid, rxid; + + res = platform_get_resource(host->pdev, IORESOURCE_DMA, 0); + if (!res) + return -ENODEV; + txid = res->start; + + res = platform_get_resource(host->pdev, IORESOURCE_DMA, 1); + if (!res) + return -ENODEV; + rxid = res->start; + + if (!memid) + return -ENODEV; + + host->tx_chan = au1xxx_dbdma_chan_alloc(memid, txid, + au1xmmc_dbdma_callback, (void *)host); + if (!host->tx_chan) { + dev_err(&host->pdev->dev, "cannot allocate TX DMA\n"); + return -ENODEV; + } + + host->rx_chan = au1xxx_dbdma_chan_alloc(rxid, memid, + au1xmmc_dbdma_callback, (void *)host); + if (!host->rx_chan) { + dev_err(&host->pdev->dev, "cannot allocate RX DMA\n"); + au1xxx_dbdma_chan_free(host->tx_chan); + return -ENODEV; + } - txchan = au1xxx_dbdma_chan_alloc(memid, txid, - au1xmmc_dma_callback, (void *) host); + au1xxx_dbdma_set_devwidth(host->tx_chan, 8); + au1xxx_dbdma_set_devwidth(host->rx_chan, 8); - rxchan = au1xxx_dbdma_chan_alloc(rxid, memid, - au1xmmc_dma_callback, (void *) host); + au1xxx_dbdma_ring_alloc(host->tx_chan, AU1XMMC_DESCRIPTOR_COUNT); + au1xxx_dbdma_ring_alloc(host->rx_chan, AU1XMMC_DESCRIPTOR_COUNT); - au1xxx_dbdma_set_devwidth(txchan, 8); - au1xxx_dbdma_set_devwidth(rxchan, 8); + /* DBDMA is good to go */ + host->flags |= HOST_F_DMA; - au1xxx_dbdma_ring_alloc(txchan, AU1XMMC_DESCRIPTOR_COUNT); - au1xxx_dbdma_ring_alloc(rxchan, AU1XMMC_DESCRIPTOR_COUNT); + return 0; +} - host->tx_chan = txchan; - host->rx_chan = rxchan; +static void au1xmmc_dbdma_shutdown(struct au1xmmc_host *host) +{ + if (host->flags & HOST_F_DMA) { + host->flags &= ~HOST_F_DMA; + au1xxx_dbdma_chan_free(host->tx_chan); + au1xxx_dbdma_chan_free(host->rx_chan); + } } +#endif static const struct mmc_host_ops au1xmmc_ops = { .request = au1xmmc_request, @@ -878,116 +856,235 @@ static const struct mmc_host_ops au1xmmc_ops = { .get_ro = au1xmmc_card_readonly, }; -static int __devinit au1xmmc_probe(struct platform_device *pdev) +static void au1xmmc_poll_event(unsigned long arg) { + struct au1xmmc_host *host = (struct au1xmmc_host *)arg; + int card = au1xmmc_card_inserted(host); + int controller = (host->flags & HOST_F_ACTIVE) ? 1 : 0; + + if (card != controller) { + host->flags &= ~HOST_F_ACTIVE; + if (card) + host->flags |= HOST_F_ACTIVE; + mmc_detect_change(host->mmc, 0); + } - int i, ret = 0; +#ifdef DEBUG + if (host->mrq != NULL) { + u32 status = au_readl(HOST_STATUS(host)); + DBG("PENDING - %8.8x\n", host->pdev->id, status); + } +#endif + mod_timer(&host->timer, jiffies + AU1XMMC_DETECT_TIMEOUT); +} - /* THe interrupt is shared among all controllers */ - ret = request_irq(AU1100_SD_IRQ, au1xmmc_irq, IRQF_DISABLED, "MMC", 0); +static void au1xmmc_init_cd_poll_timer(struct au1xmmc_host *host) +{ + init_timer(&host->timer); + host->timer.function = au1xmmc_poll_event; + host->timer.data = (unsigned long)host; + host->timer.expires = jiffies + AU1XMMC_DETECT_TIMEOUT; +} - if (ret) { - printk(DRIVER_NAME "ERROR: Couldn't get int %d: %d\n", - AU1100_SD_IRQ, ret); - return -ENXIO; +static int __devinit au1xmmc_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct au1xmmc_host *host; + struct resource *r; + int ret; + + mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev); + if (!mmc) { + dev_err(&pdev->dev, "no memory for mmc_host\n"); + ret = -ENOMEM; + goto out0; } - disable_irq(AU1100_SD_IRQ); + host = mmc_priv(mmc); + host->mmc = mmc; + host->platdata = pdev->dev.platform_data; + host->pdev = pdev; - for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) { - struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev); - struct au1xmmc_host *host = 0; + ret = -ENODEV; + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "no mmio defined\n"); + goto out1; + } - if (!mmc) { - printk(DRIVER_NAME "ERROR: no mem for host %d\n", i); - au1xmmc_hosts[i] = 0; - continue; - } + host->ioarea = request_mem_region(r->start, r->end - r->start + 1, + pdev->name); + if (!host->ioarea) { + dev_err(&pdev->dev, "mmio already in use\n"); + goto out1; + } - mmc->ops = &au1xmmc_ops; + host->iobase = (unsigned long)ioremap(r->start, 0x3c); + if (!host->iobase) { + dev_err(&pdev->dev, "cannot remap mmio\n"); + goto out2; + } + + r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!r) { + dev_err(&pdev->dev, "no IRQ defined\n"); + goto out3; + } - mmc->f_min = 450000; - mmc->f_max = 24000000; + host->irq = r->start; + /* IRQ is shared among both SD controllers */ + ret = request_irq(host->irq, au1xmmc_irq, IRQF_SHARED, + DRIVER_NAME, host); + if (ret) { + dev_err(&pdev->dev, "cannot grab IRQ\n"); + goto out3; + } - mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE; - mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT; + mmc->ops = &au1xmmc_ops; - mmc->max_blk_size = 2048; - mmc->max_blk_count = 512; + mmc->f_min = 450000; + mmc->f_max = 24000000; - mmc->ocr_avail = AU1XMMC_OCR; + mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE; + mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT; - host = mmc_priv(mmc); - host->mmc = mmc; + mmc->max_blk_size = 2048; + mmc->max_blk_count = 512; - host->id = i; - host->iobase = au1xmmc_card_table[host->id].iobase; - host->clock = 0; - host->power_mode = MMC_POWER_OFF; + mmc->ocr_avail = AU1XMMC_OCR; + mmc->caps = 0; - host->flags = au1xmmc_card_inserted(host) ? HOST_F_ACTIVE : 0; - host->status = HOST_S_IDLE; + host->status = HOST_S_IDLE; - init_timer(&host->timer); + /* board-specific carddetect setup, if any */ + if (host->platdata && host->platdata->cd_setup) { + ret = host->platdata->cd_setup(mmc, 1); + if (ret) { + dev_err(&pdev->dev, "board CD setup failed\n"); + goto out4; + } + } else { + /* poll the board-specific is-card-in-socket-? method */ + au1xmmc_init_cd_poll_timer(host); + } - host->timer.function = au1xmmc_poll_event; - host->timer.data = (unsigned long) host; - host->timer.expires = jiffies + AU1XMMC_DETECT_TIMEOUT; + tasklet_init(&host->data_task, au1xmmc_tasklet_data, + (unsigned long)host); - tasklet_init(&host->data_task, au1xmmc_tasklet_data, - (unsigned long) host); + tasklet_init(&host->finish_task, au1xmmc_tasklet_finish, + (unsigned long)host); - tasklet_init(&host->finish_task, au1xmmc_tasklet_finish, - (unsigned long) host); +#ifdef CONFIG_SOC_AU1200 + ret = au1xmmc_dbdma_init(host); + if (ret) + printk(KERN_INFO DRIVER_NAME ": DBDMA init failed; using PIO\n"); +#endif - spin_lock_init(&host->lock); +#ifdef CONFIG_LEDS_CLASS + if (host->platdata && host->platdata->led) { + struct led_classdev *led = host->platdata->led; + led->name = mmc_hostname(mmc); + led->brightness = LED_OFF; + led->default_trigger = mmc_hostname(mmc); + ret = led_classdev_register(mmc_dev(mmc), led); + if (ret) + goto out5; + } +#endif - if (dma != 0) - au1xmmc_init_dma(host); + au1xmmc_reset_controller(host); - au1xmmc_reset_controller(host); + ret = mmc_add_host(mmc); + if (ret) { + dev_err(&pdev->dev, "cannot add mmc host\n"); + goto out6; + } - mmc_add_host(mmc); - au1xmmc_hosts[i] = host; + platform_set_drvdata(pdev, mmc); + /* start the carddetect poll timer if necessary */ + if (!(host->platdata && host->platdata->cd_setup)) add_timer(&host->timer); - printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X (mode=%s)\n", - host->id, host->iobase, dma ? "dma" : "pio"); - } + printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X" + " (mode=%s)\n", pdev->id, host->iobase, + host->flags & HOST_F_DMA ? "dma" : "pio"); - enable_irq(AU1100_SD_IRQ); + return 0; /* all ok */ - return 0; +out6: +#ifdef CONFIG_LEDS_CLASS + if (host->platdata && host->platdata->led) + led_classdev_unregister(host->platdata->led); +out5: +#endif + au_writel(0, HOST_ENABLE(host)); + au_writel(0, HOST_CONFIG(host)); + au_writel(0, HOST_CONFIG2(host)); + au_sync(); + +#ifdef CONFIG_SOC_AU1200 + au1xmmc_dbdma_shutdown(host); +#endif + + tasklet_kill(&host->data_task); + tasklet_kill(&host->finish_task); + + if (host->platdata && host->platdata->cd_setup) + host->platdata->cd_setup(mmc, 0); +out4: + free_irq(host->irq, host); +out3: + iounmap((void *)host->iobase); +out2: + release_resource(host->ioarea); + kfree(host->ioarea); +out1: + mmc_free_host(mmc); +out0: + return ret; } static int __devexit au1xmmc_remove(struct platform_device *pdev) { + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct au1xmmc_host *host; + + if (mmc) { + host = mmc_priv(mmc); + + mmc_remove_host(mmc); - int i; +#ifdef CONFIG_LEDS_CLASS + if (host->platdata && host->platdata->led) + led_classdev_unregister(host->platdata->led); +#endif - disable_irq(AU1100_SD_IRQ); + if (host->platdata && host->platdata->cd_setup) + host->platdata->cd_setup(mmc, 0); + else + del_timer_sync(&host->timer); - for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) { - struct au1xmmc_host *host = au1xmmc_hosts[i]; - if (!host) continue; + au_writel(0, HOST_ENABLE(host)); + au_writel(0, HOST_CONFIG(host)); + au_writel(0, HOST_CONFIG2(host)); + au_sync(); tasklet_kill(&host->data_task); tasklet_kill(&host->finish_task); - del_timer_sync(&host->timer); +#ifdef CONFIG_SOC_AU1200 + au1xmmc_dbdma_shutdown(host); +#endif au1xmmc_set_power(host, 0); - mmc_remove_host(host->mmc); + free_irq(host->irq, host); + iounmap((void *)host->iobase); + release_resource(host->ioarea); + kfree(host->ioarea); - au1xxx_dbdma_chan_free(host->tx_chan); - au1xxx_dbdma_chan_free(host->rx_chan); - - au_writel(0x0, HOST_ENABLE(host)); - au_sync(); + mmc_free_host(mmc); } - - free_irq(AU1100_SD_IRQ, 0); return 0; } @@ -1004,21 +1101,31 @@ static struct platform_driver au1xmmc_driver = { static int __init au1xmmc_init(void) { +#ifdef CONFIG_SOC_AU1200 + /* DSCR_CMD0_ALWAYS has a stride of 32 bits, we need a stride + * of 8 bits. And since devices are shared, we need to create + * our own to avoid freaking out other devices. + */ + memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev); + if (!memid) + printk(KERN_ERR "au1xmmc: cannot add memory dbdma dev\n"); +#endif return platform_driver_register(&au1xmmc_driver); } static void __exit au1xmmc_exit(void) { +#ifdef CONFIG_SOC_AU1200 + if (memid) + au1xxx_ddma_del_device(memid); +#endif platform_driver_unregister(&au1xmmc_driver); } module_init(au1xmmc_init); module_exit(au1xmmc_exit); -#ifdef MODULE MODULE_AUTHOR("Advanced Micro Devices, Inc"); MODULE_DESCRIPTION("MMC/SD driver for the Alchemy Au1XXX"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:au1xxx-mmc"); -#endif - diff --git a/drivers/mmc/host/au1xmmc.h b/drivers/mmc/host/au1xmmc.h index 341cbdf0baca..3b400654e59c 100644 --- a/drivers/mmc/host/au1xmmc.h +++ b/drivers/mmc/host/au1xmmc.h @@ -49,8 +49,6 @@ struct au1xmmc_host { struct mmc_host *mmc; struct mmc_request *mrq; - u32 id; - u32 flags; u32 iobase; u32 clock; @@ -73,11 +71,14 @@ struct au1xmmc_host { u32 tx_chan; u32 rx_chan; + int irq; + struct timer_list timer; struct tasklet_struct finish_task; struct tasklet_struct data_task; - - spinlock_t lock; + struct au1xmmc_platform_data *platdata; + struct platform_device *pdev; + struct resource *ioarea; }; /* Status flags used by the host structure */ diff --git a/include/asm-mips/mach-au1x00/au1100_mmc.h b/include/asm-mips/mach-au1x00/au1100_mmc.h index 9e0028f60a43..c35e20918490 100644 --- a/include/asm-mips/mach-au1x00/au1100_mmc.h +++ b/include/asm-mips/mach-au1x00/au1100_mmc.h @@ -38,15 +38,15 @@ #ifndef __ASM_AU1100_MMC_H #define __ASM_AU1100_MMC_H - -#define NUM_AU1100_MMC_CONTROLLERS 2 - -#if defined(CONFIG_SOC_AU1100) -#define AU1100_SD_IRQ AU1100_SD_INT -#elif defined(CONFIG_SOC_AU1200) -#define AU1100_SD_IRQ AU1200_SD_INT -#endif - +#include + +struct au1xmmc_platform_data { + int(*cd_setup)(void *mmc_host, int on); + int(*card_inserted)(void *mmc_host); + int(*card_readonly)(void *mmc_host); + void(*set_power)(void *mmc_host, int state); + struct led_classdev *led; +}; #define SD0_BASE 0xB0600000 #define SD1_BASE 0xB0680000 -- cgit v1.2.3 From 281dd23ea03e9893c02d237d9e35a7d20d412452 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Mon, 9 Jun 2008 08:37:33 +0200 Subject: au1xmmc: enable 4 bit transfer mode Signed-off-by: Manuel Lauss Signed-off-by: Pierre Ossman --- drivers/mmc/host/au1xmmc.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index d8776d61b3cc..2bd4cf427093 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -95,14 +95,13 @@ static inline void IRQ_OFF(struct au1xmmc_host *host, u32 mask) static inline void SEND_STOP(struct au1xmmc_host *host) { - - /* We know the value of CONFIG2, so avoid a read we don't need */ - u32 mask = SD_CONFIG2_EN; + u32 config2; WARN_ON(host->status != HOST_S_DATA); host->status = HOST_S_STOP; - au_writel(mask | SD_CONFIG2_DF, HOST_CONFIG2(host)); + config2 = au_readl(HOST_CONFIG2(host)); + au_writel(config2 | SD_CONFIG2_DF, HOST_CONFIG2(host)); au_sync(); /* Send the stop commmand */ @@ -697,6 +696,7 @@ static void au1xmmc_reset_controller(struct au1xmmc_host *host) static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios) { struct au1xmmc_host *host = mmc_priv(mmc); + u32 config2; if (ios->power_mode == MMC_POWER_OFF) au1xmmc_set_power(host, 0); @@ -708,6 +708,18 @@ static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios) au1xmmc_set_clock(host, ios->clock); host->clock = ios->clock; } + + config2 = au_readl(HOST_CONFIG2(host)); + switch (ios->bus_width) { + case MMC_BUS_WIDTH_4: + config2 |= SD_CONFIG2_WB; + break; + case MMC_BUS_WIDTH_1: + config2 &= ~SD_CONFIG2_WB; + break; + } + au_writel(config2, HOST_CONFIG2(host)); + au_sync(); } #define STATUS_TIMEOUT (SD_STATUS_RAT | SD_STATUS_DT) @@ -952,7 +964,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) mmc->max_blk_count = 512; mmc->ocr_avail = AU1XMMC_OCR; - mmc->caps = 0; + mmc->caps = MMC_CAP_4_BIT_DATA; host->status = HOST_S_IDLE; -- cgit v1.2.3 From 20f522ff5583a818922b3f650f6f7ef0e3e1aa68 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Mon, 9 Jun 2008 08:38:03 +0200 Subject: au1xmmc: SDIO IRQ support. Wire up the SD controllers' SDIO IRQ capability. Signed-off-by: Manuel Lauss Signed-off-by: Pierre Ossman --- drivers/mmc/host/au1xmmc.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 2bd4cf427093..16b5640d826e 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -736,6 +736,9 @@ static irqreturn_t au1xmmc_irq(int irq, void *dev_id) if (!(status & SD_STATUS_I)) return IRQ_NONE; /* not ours */ + if (status & SD_STATUS_SI) /* SDIO */ + mmc_signal_sdio_irq(host->mmc); + if (host->mrq && (status & STATUS_TIMEOUT)) { if (status & SD_STATUS_RAT) host->mrq->cmd->error = -ETIMEDOUT; @@ -862,10 +865,21 @@ static void au1xmmc_dbdma_shutdown(struct au1xmmc_host *host) } #endif +static void au1xmmc_enable_sdio_irq(struct mmc_host *mmc, int en) +{ + struct au1xmmc_host *host = mmc_priv(mmc); + + if (en) + IRQ_ON(host, SD_CONFIG_SI); + else + IRQ_OFF(host, SD_CONFIG_SI); +} + static const struct mmc_host_ops au1xmmc_ops = { .request = au1xmmc_request, .set_ios = au1xmmc_set_ios, .get_ro = au1xmmc_card_readonly, + .enable_sdio_irq = au1xmmc_enable_sdio_irq, }; static void au1xmmc_poll_event(unsigned long arg) @@ -964,7 +978,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) mmc->max_blk_count = 512; mmc->ocr_avail = AU1XMMC_OCR; - mmc->caps = MMC_CAP_4_BIT_DATA; + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; host->status = HOST_S_IDLE; -- cgit v1.2.3 From 5c0a889df56c9f6c5a68ec7aa222082569b35fd9 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Mon, 9 Jun 2008 08:38:35 +0200 Subject: au1xmmc: codingstyle tidying. Clean up the codebase, no functional changes. - merge the au1xmmc.h header contents into the driver file, - indentation, spelling and style fixes. Signed-off-by: Manuel Lauss Signed-off-by: Pierre Ossman --- drivers/mmc/host/au1xmmc.c | 233 +++++++++++++++++++++++++++------------------ drivers/mmc/host/au1xmmc.h | 97 ------------------- 2 files changed, 141 insertions(+), 189 deletions(-) delete mode 100644 drivers/mmc/host/au1xmmc.h diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 16b5640d826e..fcbaf40e3553 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -49,20 +49,104 @@ #include #include -#include -#include "au1xmmc.h" - #define DRIVER_NAME "au1xxx-mmc" /* Set this to enable special debugging macros */ /* #define DEBUG */ #ifdef DEBUG -#define DBG(fmt, idx, args...) printk("au1xx(%d): DEBUG: " fmt, idx, ##args) +#define DBG(fmt, idx, args...) \ + printk(KERN_DEBUG "au1xmmc(%d): DEBUG: " fmt, idx, ##args) #else -#define DBG(fmt, idx, args...) +#define DBG(fmt, idx, args...) do {} while (0) #endif +/* Hardware definitions */ +#define AU1XMMC_DESCRIPTOR_COUNT 1 +#define AU1XMMC_DESCRIPTOR_SIZE 2048 + +#define AU1XMMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \ + MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \ + MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36) + +/* This gives us a hard value for the stop command that we can write directly + * to the command register. + */ +#define STOP_CMD \ + (SD_CMD_RT_1B | SD_CMD_CT_7 | (0xC << SD_CMD_CI_SHIFT) | SD_CMD_GO) + +/* This is the set of interrupts that we configure by default. */ +#define AU1XMMC_INTERRUPTS \ + (SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_RAT | \ + SD_CONFIG_CR | SD_CONFIG_I) + +/* The poll event (looking for insert/remove events runs twice a second. */ +#define AU1XMMC_DETECT_TIMEOUT (HZ/2) + +struct au1xmmc_host { + struct mmc_host *mmc; + struct mmc_request *mrq; + + u32 flags; + u32 iobase; + u32 clock; + u32 bus_width; + u32 power_mode; + + int status; + + struct { + int len; + int dir; + } dma; + + struct { + int index; + int offset; + int len; + } pio; + + u32 tx_chan; + u32 rx_chan; + + int irq; + + struct timer_list timer; + struct tasklet_struct finish_task; + struct tasklet_struct data_task; + struct au1xmmc_platform_data *platdata; + struct platform_device *pdev; + struct resource *ioarea; +}; + +/* Status flags used by the host structure */ +#define HOST_F_XMIT 0x0001 +#define HOST_F_RECV 0x0002 +#define HOST_F_DMA 0x0010 +#define HOST_F_ACTIVE 0x0100 +#define HOST_F_STOP 0x1000 + +#define HOST_S_IDLE 0x0001 +#define HOST_S_CMD 0x0002 +#define HOST_S_DATA 0x0003 +#define HOST_S_STOP 0x0004 + +/* Easy access macros */ +#define HOST_STATUS(h) ((h)->iobase + SD_STATUS) +#define HOST_CONFIG(h) ((h)->iobase + SD_CONFIG) +#define HOST_ENABLE(h) ((h)->iobase + SD_ENABLE) +#define HOST_TXPORT(h) ((h)->iobase + SD_TXPORT) +#define HOST_RXPORT(h) ((h)->iobase + SD_RXPORT) +#define HOST_CMDARG(h) ((h)->iobase + SD_CMDARG) +#define HOST_BLKSIZE(h) ((h)->iobase + SD_BLKSIZE) +#define HOST_CMD(h) ((h)->iobase + SD_CMD) +#define HOST_CONFIG2(h) ((h)->iobase + SD_CONFIG2) +#define HOST_TIMEOUT(h) ((h)->iobase + SD_TIMEOUT) +#define HOST_DEBUG(h) ((h)->iobase + SD_DEBUG) + +#define DMA_CHANNEL(h) \ + (((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan) + static inline void IRQ_ON(struct au1xmmc_host *host, u32 mask) { u32 val = au_readl(HOST_CONFIG(host)); @@ -141,7 +225,6 @@ static int au1xmmc_card_readonly(struct mmc_host *mmc) static void au1xmmc_finish_request(struct au1xmmc_host *host) { - struct mmc_request *mrq = host->mrq; host->mrq = NULL; @@ -215,18 +298,14 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait, au_sync(); /* Wait for the command to go on the line */ - - while(1) { - if (!(au_readl(HOST_CMD(host)) & SD_CMD_GO)) - break; - } + while (au_readl(HOST_CMD(host)) & SD_CMD_GO) + /* nop */; /* Wait for the command to come back */ - if (wait) { u32 status = au_readl(HOST_STATUS(host)); - while(!(status & SD_STATUS_CR)) + while (!(status & SD_STATUS_CR)) status = au_readl(HOST_STATUS(host)); /* Clear the CR status */ @@ -240,12 +319,11 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait, static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) { - struct mmc_request *mrq = host->mrq; struct mmc_data *data; u32 crc; - WARN_ON(host->status != HOST_S_DATA && host->status != HOST_S_STOP); + WARN_ON((host->status != HOST_S_DATA) && (host->status != HOST_S_STOP)); if (host->mrq == NULL) return; @@ -256,15 +334,13 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) status = au_readl(HOST_STATUS(host)); /* The transaction is really over when the SD_STATUS_DB bit is clear */ - - while((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB)) + while ((host->flags & HOST_F_XMIT) && (status & SD_STATUS_DB)) status = au_readl(HOST_STATUS(host)); data->error = 0; dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, host->dma.dir); /* Process any errors */ - crc = (status & (SD_STATUS_WC | SD_STATUS_RC)); if (host->flags & HOST_F_XMIT) crc |= ((status & 0x07) == 0x02) ? 0 : 1; @@ -282,15 +358,13 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) #ifdef CONFIG_SOC_AU1200 /* DBDMA */ u32 chan = DMA_CHANNEL(host); - chan_tab_t *c = *((chan_tab_t **) chan); + chan_tab_t *c = *((chan_tab_t **)chan); au1x_dma_chan_t *cp = c->chan_ptr; data->bytes_xfered = cp->ddma_bytecnt; #endif - } - else + } else data->bytes_xfered = - (data->blocks * data->blksz) - - host->pio.len; + (data->blocks * data->blksz) - host->pio.len; } au1xmmc_finish_request(host); @@ -298,7 +372,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status) static void au1xmmc_tasklet_data(unsigned long param) { - struct au1xmmc_host *host = (struct au1xmmc_host *) param; + struct au1xmmc_host *host = (struct au1xmmc_host *)param; u32 status = au_readl(HOST_STATUS(host)); au1xmmc_data_complete(host, status); @@ -308,11 +382,10 @@ static void au1xmmc_tasklet_data(unsigned long param) static void au1xmmc_send_pio(struct au1xmmc_host *host) { - - struct mmc_data *data = 0; - int sg_len, max, count = 0; - unsigned char *sg_ptr; - u32 status = 0; + struct mmc_data *data; + int sg_len, max, count; + unsigned char *sg_ptr, val; + u32 status; struct scatterlist *sg; data = host->mrq->data; @@ -327,14 +400,12 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host) /* This is the space left inside the buffer */ sg_len = data->sg[host->pio.index].length - host->pio.offset; - /* Check to if we need less then the size of the sg_buffer */ - + /* Check if we need less than the size of the sg_buffer */ max = (sg_len > host->pio.len) ? host->pio.len : sg_len; - if (max > AU1XMMC_MAX_TRANSFER) max = AU1XMMC_MAX_TRANSFER; - - for(count = 0; count < max; count++ ) { - unsigned char val; + if (max > AU1XMMC_MAX_TRANSFER) + max = AU1XMMC_MAX_TRANSFER; + for (count = 0; count < max; count++) { status = au_readl(HOST_STATUS(host)); if (!(status & SD_STATUS_TH)) @@ -342,7 +413,7 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host) val = *sg_ptr++; - au_writel((unsigned long) val, HOST_TXPORT(host)); + au_writel((unsigned long)val, HOST_TXPORT(host)); au_sync(); } @@ -366,11 +437,10 @@ static void au1xmmc_send_pio(struct au1xmmc_host *host) static void au1xmmc_receive_pio(struct au1xmmc_host *host) { - - struct mmc_data *data = 0; - int sg_len = 0, max = 0, count = 0; - unsigned char *sg_ptr = 0; - u32 status = 0; + struct mmc_data *data; + int max, count, sg_len = 0; + unsigned char *sg_ptr = NULL; + u32 status, val; struct scatterlist *sg; data = host->mrq->data; @@ -387,15 +457,15 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host) /* This is the space left inside the buffer */ sg_len = sg_dma_len(&data->sg[host->pio.index]) - host->pio.offset; - /* Check to if we need less then the size of the sg_buffer */ - if (sg_len < max) max = sg_len; + /* Check if we need less than the size of the sg_buffer */ + if (sg_len < max) + max = sg_len; } if (max > AU1XMMC_MAX_TRANSFER) max = AU1XMMC_MAX_TRANSFER; - for(count = 0; count < max; count++ ) { - u32 val; + for (count = 0; count < max; count++) { status = au_readl(HOST_STATUS(host)); if (!(status & SD_STATUS_NE)) @@ -421,7 +491,7 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host) val = au_readl(HOST_RXPORT(host)); if (sg_ptr) - *sg_ptr++ = (unsigned char) (val & 0xFF); + *sg_ptr++ = (unsigned char)(val & 0xFF); } host->pio.len -= count; @@ -433,7 +503,7 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host) } if (host->pio.len == 0) { - //IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF); + /* IRQ_OFF(host, SD_CONFIG_RA | SD_CONFIG_RF); */ IRQ_OFF(host, SD_CONFIG_NE); if (host->flags & HOST_F_STOP) @@ -443,17 +513,15 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host) } } -/* static void au1xmmc_cmd_complete - This is called when a command has been completed - grab the response - and check for errors. Then start the data transfer if it is indicated. -*/ - +/* This is called when a command has been completed - grab the response + * and check for errors. Then start the data transfer if it is indicated. + */ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) { - struct mmc_request *mrq = host->mrq; struct mmc_command *cmd; - int trans; + u32 r[4]; + int i, trans; if (!host->mrq) return; @@ -463,9 +531,6 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) if (cmd->flags & MMC_RSP_PRESENT) { if (cmd->flags & MMC_RSP_136) { - u32 r[4]; - int i; - r[0] = au_readl(host->iobase + SD_RESP3); r[1] = au_readl(host->iobase + SD_RESP2); r[2] = au_readl(host->iobase + SD_RESP1); @@ -473,10 +538,9 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) /* The CRC is omitted from the response, so really * we only got 120 bytes, but the engine expects - * 128 bits, so we have to shift things up + * 128 bits, so we have to shift things up. */ - - for(i = 0; i < 4; i++) { + for (i = 0; i < 4; i++) { cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8; if (i != 3) cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24; @@ -487,22 +551,20 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) * our response omits the CRC, our data ends up * being shifted 8 bits to the right. In this case, * that means that the OSR data starts at bit 31, - * so we can just read RESP0 and return that + * so we can just read RESP0 and return that. */ cmd->resp[0] = au_readl(host->iobase + SD_RESP0); } } /* Figure out errors */ - if (status & (SD_STATUS_SC | SD_STATUS_WC | SD_STATUS_RC)) cmd->error = -EILSEQ; trans = host->flags & (HOST_F_XMIT | HOST_F_RECV); if (!trans || cmd->error) { - - IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA|SD_CONFIG_RF); + IRQ_OFF(host, SD_CONFIG_TH | SD_CONFIG_RA | SD_CONFIG_RF); tasklet_schedule(&host->finish_task); return; } @@ -529,18 +591,15 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate) { - unsigned int pbus = get_au1x00_speed(); unsigned int divisor; u32 config; /* From databook: - divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1 - */ - + * divisor = ((((cpuclock / sbus_divisor) / 2) / mmcclock) / 2) - 1 + */ pbus /= ((au_readl(SYS_POWERCTRL) & 0x3) + 2); pbus /= 2; - divisor = ((pbus / rate) / 2) - 1; config = au_readl(HOST_CONFIG(host)); @@ -552,8 +611,8 @@ static void au1xmmc_set_clock(struct au1xmmc_host *host, int rate) au_sync(); } -static int -au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) +static int au1xmmc_prepare_data(struct au1xmmc_host *host, + struct mmc_data *data) { int datalen = data->blocks * data->blksz; @@ -582,7 +641,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) au1xxx_dbdma_stop(channel); - for(i = 0; i < host->dma.len; i++) { + for (i = 0; i < host->dma.len; i++) { u32 ret = 0, flags = DDMA_FLAGS_NOIE; struct scatterlist *sg = &data->sg[i]; int sg_len = sg->length; @@ -592,14 +651,12 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) if (i == host->dma.len - 1) flags = DDMA_FLAGS_IE; - if (host->flags & HOST_F_XMIT){ - ret = au1xxx_dbdma_put_source_flags(channel, - (void *) sg_virt(sg), len, flags); - } - else { - ret = au1xxx_dbdma_put_dest_flags(channel, - (void *) sg_virt(sg), - len, flags); + if (host->flags & HOST_F_XMIT) { + ret = au1xxx_dbdma_put_source_flags(channel, + (void *)sg_virt(sg), len, flags); + } else { + ret = au1xxx_dbdma_put_dest_flags(channel, + (void *)sg_virt(sg), len, flags); } if (!ret) @@ -608,8 +665,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) datalen -= len; } #endif - } - else { + } else { host->pio.index = 0; host->pio.offset = 0; host->pio.len = datalen; @@ -618,7 +674,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data) IRQ_ON(host, SD_CONFIG_TH); else IRQ_ON(host, SD_CONFIG_NE); - //IRQ_ON(host, SD_CONFIG_RA|SD_CONFIG_RF); + /* IRQ_ON(host, SD_CONFIG_RA | SD_CONFIG_RF); */ } return 0; @@ -629,15 +685,10 @@ dataerr: return -ETIMEDOUT; } -/* static void au1xmmc_request - This actually starts a command or data transaction -*/ - +/* This actually starts a command or data transaction */ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq) { - struct au1xmmc_host *host = mmc_priv(mmc); - unsigned int flags = 0; int ret = 0; WARN_ON(irqs_disabled()); @@ -648,7 +699,6 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq) if (mrq->data) { FLUSH_FIFO(host); - flags = mrq->data->flags; ret = au1xmmc_prepare_data(host, mrq->data); } @@ -663,7 +713,6 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq) static void au1xmmc_reset_controller(struct au1xmmc_host *host) { - /* Apply the clock */ au_writel(SD_ENABLE_CE, HOST_ENABLE(host)); au_sync_delay(1); @@ -693,7 +742,7 @@ static void au1xmmc_reset_controller(struct au1xmmc_host *host) } -static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios) +static void au1xmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct au1xmmc_host *host = mmc_priv(mmc); u32 config2; diff --git a/drivers/mmc/host/au1xmmc.h b/drivers/mmc/host/au1xmmc.h deleted file mode 100644 index 3b400654e59c..000000000000 --- a/drivers/mmc/host/au1xmmc.h +++ /dev/null @@ -1,97 +0,0 @@ -#ifndef _AU1XMMC_H_ -#define _AU1XMMC_H_ - -/* Hardware definitions */ - -#define AU1XMMC_DESCRIPTOR_COUNT 1 -#define AU1XMMC_DESCRIPTOR_SIZE 2048 - -#define AU1XMMC_OCR ( MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \ - MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \ - MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36) - -/* Easy access macros */ - -#define HOST_STATUS(h) ((h)->iobase + SD_STATUS) -#define HOST_CONFIG(h) ((h)->iobase + SD_CONFIG) -#define HOST_ENABLE(h) ((h)->iobase + SD_ENABLE) -#define HOST_TXPORT(h) ((h)->iobase + SD_TXPORT) -#define HOST_RXPORT(h) ((h)->iobase + SD_RXPORT) -#define HOST_CMDARG(h) ((h)->iobase + SD_CMDARG) -#define HOST_BLKSIZE(h) ((h)->iobase + SD_BLKSIZE) -#define HOST_CMD(h) ((h)->iobase + SD_CMD) -#define HOST_CONFIG2(h) ((h)->iobase + SD_CONFIG2) -#define HOST_TIMEOUT(h) ((h)->iobase + SD_TIMEOUT) -#define HOST_DEBUG(h) ((h)->iobase + SD_DEBUG) - -#define DMA_CHANNEL(h) \ - ( ((h)->flags & HOST_F_XMIT) ? (h)->tx_chan : (h)->rx_chan) - -/* This gives us a hard value for the stop command that we can write directly - * to the command register - */ - -#define STOP_CMD (SD_CMD_RT_1B|SD_CMD_CT_7|(0xC << SD_CMD_CI_SHIFT)|SD_CMD_GO) - -/* This is the set of interrupts that we configure by default */ - -#if 0 -#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | SD_CONFIG_DD | \ - SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I) -#endif - -#define AU1XMMC_INTERRUPTS (SD_CONFIG_SC | SD_CONFIG_DT | \ - SD_CONFIG_RAT | SD_CONFIG_CR | SD_CONFIG_I) -/* The poll event (looking for insert/remove events runs twice a second */ -#define AU1XMMC_DETECT_TIMEOUT (HZ/2) - -struct au1xmmc_host { - struct mmc_host *mmc; - struct mmc_request *mrq; - - u32 flags; - u32 iobase; - u32 clock; - u32 bus_width; - u32 power_mode; - - int status; - - struct { - int len; - int dir; - } dma; - - struct { - int index; - int offset; - int len; - } pio; - - u32 tx_chan; - u32 rx_chan; - - int irq; - - struct timer_list timer; - struct tasklet_struct finish_task; - struct tasklet_struct data_task; - struct au1xmmc_platform_data *platdata; - struct platform_device *pdev; - struct resource *ioarea; -}; - -/* Status flags used by the host structure */ - -#define HOST_F_XMIT 0x0001 -#define HOST_F_RECV 0x0002 -#define HOST_F_DMA 0x0010 -#define HOST_F_ACTIVE 0x0100 -#define HOST_F_STOP 0x1000 - -#define HOST_S_IDLE 0x0001 -#define HOST_S_CMD 0x0002 -#define HOST_S_DATA 0x0003 -#define HOST_S_STOP 0x0004 - -#endif -- cgit v1.2.3 From 88b8d9a83431237bf3eec1f2968f763607811171 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Mon, 9 Jun 2008 08:39:11 +0200 Subject: au1xmmc: abort requests early if no card is present. Don't process an MMC request if no card is present. Signed-off-by: Manuel Lauss Signed-off-by: Pierre Ossman --- drivers/mmc/host/au1xmmc.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index fcbaf40e3553..718eb879587f 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -697,6 +697,13 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq) host->mrq = mrq; host->status = HOST_S_CMD; + /* fail request immediately if no card is present */ + if (0 == au1xmmc_card_inserted(host)) { + mrq->cmd->error = -ENOMEDIUM; + au1xmmc_finish_request(host); + return; + } + if (mrq->data) { FLUSH_FIFO(host); ret = au1xmmc_prepare_data(host, mrq->data); -- cgit v1.2.3 From 08fcb7208c4a8913232e48931783270262ece954 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Mon, 9 Jun 2008 08:40:35 +0200 Subject: au1xmmc: new maintainer. Signed-off-by: Manuel Lauss Signed-off-by: Pierre Ossman --- MAINTAINERS | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 1528e58b5408..f140449ba059 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -348,7 +348,9 @@ W: http://www.linux-usb.org/SpeedTouch/ S: Maintained ALCHEMY AU1XX0 MMC DRIVER -S: Orphan +P: Manuel Lauss +M: manuel.lauss@gmail.com +S: Maintained ALI1563 I2C DRIVER P: Rudolf Marek -- cgit v1.2.3 From e2d2647702702ea08cb78cdc9eca8c24242aa9be Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Fri, 27 Jun 2008 18:25:18 +0200 Subject: au1xmmc: remove custom carddetect poll implementation. The MMC core provides a carddetect poll feature, time to remove the driver's own implementation of it. Signed-off-by: Manuel Lauss Signed-off-by: Pierre Ossman --- drivers/mmc/host/au1xmmc.c | 79 +++++++++++----------------------------------- 1 file changed, 18 insertions(+), 61 deletions(-) diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index 718eb879587f..3f15eb204895 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -21,7 +21,7 @@ * published by the Free Software Foundation. */ -/* Why is a timer used to detect insert events? +/* Why don't we use the SD controllers' carddetect feature? * * From the AU1100 MMC application guide: * If the Au1100-based design is intended to support both MultiMediaCards @@ -30,8 +30,6 @@ * In doing so, a MMC card never enters SPI-mode communications, * but now the SecureDigital card-detect feature of CD/DAT3 is ineffective * (the low to high transition will not occur). - * - * So we use the timer to check the status manually. */ #include @@ -111,7 +109,6 @@ struct au1xmmc_host { int irq; - struct timer_list timer; struct tasklet_struct finish_task; struct tasklet_struct data_task; struct au1xmmc_platform_data *platdata; @@ -198,29 +195,24 @@ static void au1xmmc_set_power(struct au1xmmc_host *host, int state) host->platdata->set_power(host->mmc, state); } -static int au1xmmc_card_inserted(struct au1xmmc_host *host) +static int au1xmmc_card_inserted(struct mmc_host *mmc) { - int ret; + struct au1xmmc_host *host = mmc_priv(mmc); if (host->platdata && host->platdata->card_inserted) - ret = host->platdata->card_inserted(host->mmc); - else - ret = 1; /* assume there is a card */ + return !!host->platdata->card_inserted(host->mmc); - return ret; + return -ENOSYS; } static int au1xmmc_card_readonly(struct mmc_host *mmc) { struct au1xmmc_host *host = mmc_priv(mmc); - int ret; if (host->platdata && host->platdata->card_readonly) - ret = host->platdata->card_readonly(mmc); - else - ret = 0; /* assume card is read-write */ + return !!host->platdata->card_readonly(mmc); - return ret; + return -ENOSYS; } static void au1xmmc_finish_request(struct au1xmmc_host *host) @@ -698,7 +690,7 @@ static void au1xmmc_request(struct mmc_host* mmc, struct mmc_request* mrq) host->status = HOST_S_CMD; /* fail request immediately if no card is present */ - if (0 == au1xmmc_card_inserted(host)) { + if (0 == au1xmmc_card_inserted(mmc)) { mrq->cmd->error = -ENOMEDIUM; au1xmmc_finish_request(host); return; @@ -935,39 +927,10 @@ static const struct mmc_host_ops au1xmmc_ops = { .request = au1xmmc_request, .set_ios = au1xmmc_set_ios, .get_ro = au1xmmc_card_readonly, + .get_cd = au1xmmc_card_inserted, .enable_sdio_irq = au1xmmc_enable_sdio_irq, }; -static void au1xmmc_poll_event(unsigned long arg) -{ - struct au1xmmc_host *host = (struct au1xmmc_host *)arg; - int card = au1xmmc_card_inserted(host); - int controller = (host->flags & HOST_F_ACTIVE) ? 1 : 0; - - if (card != controller) { - host->flags &= ~HOST_F_ACTIVE; - if (card) - host->flags |= HOST_F_ACTIVE; - mmc_detect_change(host->mmc, 0); - } - -#ifdef DEBUG - if (host->mrq != NULL) { - u32 status = au_readl(HOST_STATUS(host)); - DBG("PENDING - %8.8x\n", host->pdev->id, status); - } -#endif - mod_timer(&host->timer, jiffies + AU1XMMC_DETECT_TIMEOUT); -} - -static void au1xmmc_init_cd_poll_timer(struct au1xmmc_host *host) -{ - init_timer(&host->timer); - host->timer.function = au1xmmc_poll_event; - host->timer.data = (unsigned long)host; - host->timer.expires = jiffies + AU1XMMC_DETECT_TIMEOUT; -} - static int __devinit au1xmmc_probe(struct platform_device *pdev) { struct mmc_host *mmc; @@ -1042,13 +1005,11 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) if (host->platdata && host->platdata->cd_setup) { ret = host->platdata->cd_setup(mmc, 1); if (ret) { - dev_err(&pdev->dev, "board CD setup failed\n"); - goto out4; + dev_warn(&pdev->dev, "board CD setup failed\n"); + mmc->caps |= MMC_CAP_NEEDS_POLL; } - } else { - /* poll the board-specific is-card-in-socket-? method */ - au1xmmc_init_cd_poll_timer(host); - } + } else + mmc->caps |= MMC_CAP_NEEDS_POLL; tasklet_init(&host->data_task, au1xmmc_tasklet_data, (unsigned long)host); @@ -1084,10 +1045,6 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mmc); - /* start the carddetect poll timer if necessary */ - if (!(host->platdata && host->platdata->cd_setup)) - add_timer(&host->timer); - printk(KERN_INFO DRIVER_NAME ": MMC Controller %d set up at %8.8X" " (mode=%s)\n", pdev->id, host->iobase, host->flags & HOST_F_DMA ? "dma" : "pio"); @@ -1112,9 +1069,10 @@ out5: tasklet_kill(&host->data_task); tasklet_kill(&host->finish_task); - if (host->platdata && host->platdata->cd_setup) + if (host->platdata && host->platdata->cd_setup && + !(mmc->caps & MMC_CAP_NEEDS_POLL)) host->platdata->cd_setup(mmc, 0); -out4: + free_irq(host->irq, host); out3: iounmap((void *)host->iobase); @@ -1142,10 +1100,9 @@ static int __devexit au1xmmc_remove(struct platform_device *pdev) led_classdev_unregister(host->platdata->led); #endif - if (host->platdata && host->platdata->cd_setup) + if (host->platdata && host->platdata->cd_setup && + !(mmc->caps & MMC_CAP_NEEDS_POLL)) host->platdata->cd_setup(mmc, 0); - else - del_timer_sync(&host->timer); au_writel(0, HOST_ENABLE(host)); au_writel(0, HOST_CONFIG(host)); -- cgit v1.2.3 From ad3868b2ec96ec14a1549c9e33f5f9a2a3c6ab15 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sat, 28 Jun 2008 12:52:45 +0200 Subject: mmc,sdio: helper function for transfer padding There are a lot of crappy controllers out there that cannot handle all the request sizes that the MMC/SD/SDIO specifications require. In case the card driver can pad the data to overcome the problems, this commit adds a helper that calculates how much that padding should be. A corresponding helper is also added for SDIO, but it can also deal with all the complexities of splitting up a large transfer efficiently. Signed-off-by: Pierre Ossman --- drivers/mmc/core/core.c | 29 +++++++++- drivers/mmc/core/sdio_io.c | 99 ++++++++++++++++++++++++++++++++- drivers/net/wireless/libertas/if_sdio.c | 20 +++---- include/linux/mmc/core.h | 1 + include/linux/mmc/sdio_func.h | 4 +- 5 files changed, 137 insertions(+), 16 deletions(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index ede5d1e2e20d..3ee5b8c3b5ce 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -3,7 +3,7 @@ * * Copyright (C) 2003-2004 Russell King, All Rights Reserved. * SD support Copyright (C) 2004 Ian Molton, All Rights Reserved. - * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved. + * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. * MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved. * * This program is free software; you can redistribute it and/or modify @@ -294,6 +294,33 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) } EXPORT_SYMBOL(mmc_set_data_timeout); +/** + * mmc_align_data_size - pads a transfer size to a more optimal value + * @card: the MMC card associated with the data transfer + * @sz: original transfer size + * + * Pads the original data size with a number of extra bytes in + * order to avoid controller bugs and/or performance hits + * (e.g. some controllers revert to PIO for certain sizes). + * + * Returns the improved size, which might be unmodified. + * + * Note that this function is only relevant when issuing a + * single scatter gather entry. + */ +unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz) +{ + /* + * FIXME: We don't have a system for the controller to tell + * the core about its problems yet, so for now we just 32-bit + * align the size. + */ + sz = ((sz + 3) / 4) * 4; + + return sz; +} +EXPORT_SYMBOL(mmc_align_data_size); + /** * __mmc_claim_host - exclusively claim a host * @host: mmc host to claim diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index 625b92ce9cef..6ee7861fceae 100644 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -1,7 +1,7 @@ /* * linux/drivers/mmc/core/sdio_io.c * - * Copyright 2007 Pierre Ossman + * Copyright 2007-2008 Pierre Ossman * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -189,6 +189,103 @@ int sdio_set_block_size(struct sdio_func *func, unsigned blksz) EXPORT_SYMBOL_GPL(sdio_set_block_size); +/** + * sdio_align_size - pads a transfer size to a more optimal value + * @func: SDIO function + * @sz: original transfer size + * + * Pads the original data size with a number of extra bytes in + * order to avoid controller bugs and/or performance hits + * (e.g. some controllers revert to PIO for certain sizes). + * + * If possible, it will also adjust the size so that it can be + * handled in just a single request. + * + * Returns the improved size, which might be unmodified. + */ +unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz) +{ + unsigned int orig_sz; + unsigned int blk_sz, byte_sz; + unsigned chunk_sz; + + orig_sz = sz; + + /* + * Do a first check with the controller, in case it + * wants to increase the size up to a point where it + * might need more than one block. + */ + sz = mmc_align_data_size(func->card, sz); + + /* + * If we can still do this with just a byte transfer, then + * we're done. + */ + if ((sz <= func->cur_blksize) && (sz <= 512)) + return sz; + + if (func->card->cccr.multi_block) { + /* + * Check if the transfer is already block aligned + */ + if ((sz % func->cur_blksize) == 0) + return sz; + + /* + * Realign it so that it can be done with one request, + * and recheck if the controller still likes it. + */ + blk_sz = ((sz + func->cur_blksize - 1) / + func->cur_blksize) * func->cur_blksize; + blk_sz = mmc_align_data_size(func->card, blk_sz); + + /* + * This value is only good if it is still just + * one request. + */ + if ((blk_sz % func->cur_blksize) == 0) + return blk_sz; + + /* + * We failed to do one request, but at least try to + * pad the remainder properly. + */ + byte_sz = mmc_align_data_size(func->card, + sz % func->cur_blksize); + if ((byte_sz <= func->cur_blksize) && (byte_sz <= 512)) { + blk_sz = sz / func->cur_blksize; + return blk_sz * func->cur_blksize + byte_sz; + } + } else { + /* + * We need multiple requests, so first check that the + * controller can handle the chunk size; + */ + chunk_sz = mmc_align_data_size(func->card, + min(func->cur_blksize, 512u)); + if (chunk_sz == min(func->cur_blksize, 512u)) { + /* + * Fix up the size of the remainder (if any) + */ + byte_sz = orig_sz % chunk_sz; + if (byte_sz) { + byte_sz = mmc_align_data_size(func->card, + byte_sz); + } + + return (orig_sz / chunk_sz) * chunk_sz + byte_sz; + } + } + + /* + * The controller is simply incapable of transferring the size + * we want in decent manner, so just return the original size. + */ + return orig_sz; +} +EXPORT_SYMBOL_GPL(sdio_align_size); + /* Split an arbitrarily sized data transfer into several * IO_RW_EXTENDED commands. */ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 3dd537be87d8..b54e2ea8346b 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -1,7 +1,7 @@ /* * linux/drivers/net/wireless/libertas/if_sdio.c * - * Copyright 2007 Pierre Ossman + * Copyright 2007-2008 Pierre Ossman * * Inspired by if_cs.c, Copyright 2007 Holger Schurig * @@ -266,13 +266,10 @@ static int if_sdio_card_to_host(struct if_sdio_card *card) /* * The transfer must be in one transaction or the firmware - * goes suicidal. + * goes suicidal. There's no way to guarantee that for all + * controllers, but we can at least try. */ - chunk = size; - if ((chunk > card->func->cur_blksize) || (chunk > 512)) { - chunk = (chunk + card->func->cur_blksize - 1) / - card->func->cur_blksize * card->func->cur_blksize; - } + chunk = sdio_align_size(card->func, size); ret = sdio_readsb(card->func, card->buffer, card->ioport, chunk); if (ret) @@ -696,13 +693,10 @@ static int if_sdio_host_to_card(struct lbs_private *priv, /* * The transfer must be in one transaction or the firmware - * goes suicidal. + * goes suicidal. There's no way to guarantee that for all + * controllers, but we can at least try. */ - size = nb + 4; - if ((size > card->func->cur_blksize) || (size > 512)) { - size = (size + card->func->cur_blksize - 1) / - card->func->cur_blksize * card->func->cur_blksize; - } + size = sdio_align_size(card->func, nb + 4); packet = kzalloc(sizeof(struct if_sdio_packet) + size, GFP_ATOMIC); diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index d0c3abed74c2..143cebf0586f 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -135,6 +135,7 @@ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *, struct mmc_command *, int); extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *); +extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int); extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort); extern void mmc_release_host(struct mmc_host *host); diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h index b050f4d7b41f..f57f22b3be88 100644 --- a/include/linux/mmc/sdio_func.h +++ b/include/linux/mmc/sdio_func.h @@ -1,7 +1,7 @@ /* * include/linux/mmc/sdio_func.h * - * Copyright 2007 Pierre Ossman + * Copyright 2007-2008 Pierre Ossman * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -120,6 +120,8 @@ extern int sdio_set_block_size(struct sdio_func *func, unsigned blksz); extern int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler); extern int sdio_release_irq(struct sdio_func *func); +extern unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz); + extern unsigned char sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret); extern unsigned short sdio_readw(struct sdio_func *func, -- cgit v1.2.3 From eea0f581c4e596e02250df230f8d385827977964 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sat, 28 Jun 2008 13:22:40 +0200 Subject: sdio: clean up handling of byte mode transfer size Make sure that the maximum size for a byte mode transfer is identical in all places. Also tweak the transfer helper so that a single byte mode transfer is preferred over (possibly multiple) block mode request(s). Signed-off-by: Pierre Ossman --- drivers/mmc/core/sdio_io.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index 6ee7861fceae..cc42a41ff6ab 100644 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -186,9 +186,20 @@ int sdio_set_block_size(struct sdio_func *func, unsigned blksz) func->cur_blksize = blksz; return 0; } - EXPORT_SYMBOL_GPL(sdio_set_block_size); +/* + * Calculate the maximum byte mode transfer size + */ +static inline unsigned int sdio_max_byte_size(struct sdio_func *func) +{ + return min(min(min( + func->card->host->max_seg_size, + func->card->host->max_blk_size), + func->max_blksize), + 512u); /* maximum size for byte mode */ +} + /** * sdio_align_size - pads a transfer size to a more optimal value * @func: SDIO function @@ -222,7 +233,7 @@ unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz) * If we can still do this with just a byte transfer, then * we're done. */ - if ((sz <= func->cur_blksize) && (sz <= 512)) + if (sz <= sdio_max_byte_size(func)) return sz; if (func->card->cccr.multi_block) { @@ -253,7 +264,7 @@ unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz) */ byte_sz = mmc_align_data_size(func->card, sz % func->cur_blksize); - if ((byte_sz <= func->cur_blksize) && (byte_sz <= 512)) { + if (byte_sz <= sdio_max_byte_size(func)) { blk_sz = sz / func->cur_blksize; return blk_sz * func->cur_blksize + byte_sz; } @@ -263,8 +274,8 @@ unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz) * controller can handle the chunk size; */ chunk_sz = mmc_align_data_size(func->card, - min(func->cur_blksize, 512u)); - if (chunk_sz == min(func->cur_blksize, 512u)) { + sdio_max_byte_size(func)); + if (chunk_sz == sdio_max_byte_size(func)) { /* * Fix up the size of the remainder (if any) */ @@ -296,7 +307,7 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, int ret; /* Do the bulk of the transfer using block mode (if supported). */ - if (func->card->cccr.multi_block) { + if (func->card->cccr.multi_block && (size > sdio_max_byte_size(func))) { /* Blocks per command is limited by host count, host transfer * size (we only use a single sg entry) and the maximum for * IO_RW_EXTENDED of 511 blocks. */ @@ -328,11 +339,7 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, /* Write the remainder using byte mode. */ while (remainder > 0) { - size = remainder; - if (size > func->cur_blksize) - size = func->cur_blksize; - if (size > 512) - size = 512; /* maximum size for byte mode */ + size = min(remainder, sdio_max_byte_size(func)); ret = mmc_io_rw_extended(func->card, write, func->num, addr, incr_addr, buf, 1, size); -- cgit v1.2.3 From 0121a9829bf28c65e1a05cc881899c10d82b8de2 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sat, 28 Jun 2008 17:51:27 +0200 Subject: mmc_test: only bind to supported cards We can only perform the tests on MMC and SD cards, so avoid binding to any other type. Signed-off-by: Pierre Ossman --- drivers/mmc/card/mmc_test.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index 371d922d9ee2..8e0bb12d048d 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -1,7 +1,7 @@ /* * linux/drivers/mmc/card/mmc_test.c * - * Copyright 2007 Pierre Ossman + * Copyright 2007-2008 Pierre Ossman * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -858,6 +858,9 @@ static int mmc_test_probe(struct mmc_card *card) { int ret; + if ((card->type != MMC_TYPE_MMC) && (card->type != MMC_TYPE_SD)) + return -ENODEV; + mutex_init(&mmc_test_lock); ret = device_create_file(&card->dev, &dev_attr_test); -- cgit v1.2.3 From 93fc48c785f6266e67663b3cbbf24579b53fe5cf Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sat, 28 Jun 2008 18:21:41 +0200 Subject: sdhci-pci: don't penalize newer jmicron chips The upcoming JMicron chips will have solved all the currently known bugs, so don't penalize them for older problems. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-pci.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index c0fbf48d9b45..0716dcffd511 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -139,6 +139,12 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) { int ret; + if (chip->pdev->revision == 0) { + chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE | + SDHCI_QUIRK_RESET_AFTER_REQUEST; + } + /* * JMicron chips can have two interfaces to the same hardware * in order to work around limitations in Microsoft's driver. @@ -250,10 +256,6 @@ static int jmicron_resume(struct sdhci_pci_chip *chip) } static const struct sdhci_pci_fixes sdhci_jmicron = { - .quirks = SDHCI_QUIRK_32BIT_DMA_ADDR | - SDHCI_QUIRK_32BIT_DMA_SIZE | - SDHCI_QUIRK_RESET_AFTER_REQUEST, - .probe = jmicron_probe, .probe_slot = jmicron_probe_slot, -- cgit v1.2.3 From 2134a922c6e75c779983cad5d8aae832275f5a0d Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sat, 28 Jun 2008 18:28:51 +0200 Subject: sdhci: scatter-gather (ADMA) support Add support for the scatter-gather DMA mode present on newer controllers. As the mode requires 32-bit alignment, non-aligned chunks are handled by using a bounce buffer. Also add some new quirks to handle controllers that have bugs in the ADMA engine. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci-pci.c | 17 ++ drivers/mmc/host/sdhci.c | 383 +++++++++++++++++++++++++++++++++++++++---- drivers/mmc/host/sdhci.h | 51 +++++- 3 files changed, 407 insertions(+), 44 deletions(-) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 0716dcffd511..deb607c52c0d 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -142,6 +142,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) if (chip->pdev->revision == 0) { chip->quirks |= SDHCI_QUIRK_32BIT_DMA_ADDR | SDHCI_QUIRK_32BIT_DMA_SIZE | + SDHCI_QUIRK_32BIT_ADMA_SIZE | SDHCI_QUIRK_RESET_AFTER_REQUEST; } @@ -206,6 +207,22 @@ static void jmicron_enable_mmc(struct sdhci_host *host, int on) static int jmicron_probe_slot(struct sdhci_pci_slot *slot) { + if (slot->chip->pdev->revision == 0) { + u16 version; + + version = readl(slot->host->ioaddr + SDHCI_HOST_VERSION); + version = (version & SDHCI_VENDOR_VER_MASK) >> + SDHCI_VENDOR_VER_SHIFT; + + /* + * Older versions of the chip have lots of nasty glitches + * in the ADMA engine. It's best just to avoid it + * completely. + */ + if (version < 0xAC) + slot->host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; + } + /* * The secondary interface requires a bit set to get the * interrupts. diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 0ab582e77ac2..b802044ea940 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -124,7 +124,8 @@ static void sdhci_init(struct sdhci_host *host) SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT | SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT | SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | - SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE; + SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE | + SDHCI_INT_ADMA_ERROR; writel(intmask, host->ioaddr + SDHCI_INT_ENABLE); writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE); @@ -314,6 +315,196 @@ static void sdhci_transfer_pio(struct sdhci_host *host) DBG("PIO transfer complete.\n"); } +static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags) +{ + local_irq_save(*flags); + return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset; +} + +static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags) +{ + kunmap_atomic(buffer, KM_BIO_SRC_IRQ); + local_irq_restore(*flags); +} + +static void sdhci_adma_table_pre(struct sdhci_host *host, + struct mmc_data *data) +{ + int direction; + + u8 *desc; + u8 *align; + dma_addr_t addr; + dma_addr_t align_addr; + int len, offset; + + struct scatterlist *sg; + int i; + char *buffer; + unsigned long flags; + + /* + * The spec does not specify endianness of descriptor table. + * We currently guess that it is LE. + */ + + if (data->flags & MMC_DATA_READ) + direction = DMA_FROM_DEVICE; + else + direction = DMA_TO_DEVICE; + + /* + * The ADMA descriptor table is mapped further down as we + * need to fill it with data first. + */ + + host->align_addr = dma_map_single(mmc_dev(host->mmc), + host->align_buffer, 128 * 4, direction); + BUG_ON(host->align_addr & 0x3); + + host->sg_count = dma_map_sg(mmc_dev(host->mmc), + data->sg, data->sg_len, direction); + + desc = host->adma_desc; + align = host->align_buffer; + + align_addr = host->align_addr; + + for_each_sg(data->sg, sg, host->sg_count, i) { + addr = sg_dma_address(sg); + len = sg_dma_len(sg); + + /* + * The SDHCI specification states that ADMA + * addresses must be 32-bit aligned. If they + * aren't, then we use a bounce buffer for + * the (up to three) bytes that screw up the + * alignment. + */ + offset = (4 - (addr & 0x3)) & 0x3; + if (offset) { + if (data->flags & MMC_DATA_WRITE) { + buffer = sdhci_kmap_atomic(sg, &flags); + memcpy(align, buffer, offset); + sdhci_kunmap_atomic(buffer, &flags); + } + + desc[7] = (align_addr >> 24) & 0xff; + desc[6] = (align_addr >> 16) & 0xff; + desc[5] = (align_addr >> 8) & 0xff; + desc[4] = (align_addr >> 0) & 0xff; + + BUG_ON(offset > 65536); + + desc[3] = (offset >> 8) & 0xff; + desc[2] = (offset >> 0) & 0xff; + + desc[1] = 0x00; + desc[0] = 0x21; /* tran, valid */ + + align += 4; + align_addr += 4; + + desc += 8; + + addr += offset; + len -= offset; + } + + desc[7] = (addr >> 24) & 0xff; + desc[6] = (addr >> 16) & 0xff; + desc[5] = (addr >> 8) & 0xff; + desc[4] = (addr >> 0) & 0xff; + + BUG_ON(len > 65536); + + desc[3] = (len >> 8) & 0xff; + desc[2] = (len >> 0) & 0xff; + + desc[1] = 0x00; + desc[0] = 0x21; /* tran, valid */ + + desc += 8; + + /* + * If this triggers then we have a calculation bug + * somewhere. :/ + */ + WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4); + } + + /* + * Add a terminating entry. + */ + desc[7] = 0; + desc[6] = 0; + desc[5] = 0; + desc[4] = 0; + + desc[3] = 0; + desc[2] = 0; + + desc[1] = 0x00; + desc[0] = 0x03; /* nop, end, valid */ + + /* + * Resync align buffer as we might have changed it. + */ + if (data->flags & MMC_DATA_WRITE) { + dma_sync_single_for_device(mmc_dev(host->mmc), + host->align_addr, 128 * 4, direction); + } + + host->adma_addr = dma_map_single(mmc_dev(host->mmc), + host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE); + BUG_ON(host->adma_addr & 0x3); +} + +static void sdhci_adma_table_post(struct sdhci_host *host, + struct mmc_data *data) +{ + int direction; + + struct scatterlist *sg; + int i, size; + u8 *align; + char *buffer; + unsigned long flags; + + if (data->flags & MMC_DATA_READ) + direction = DMA_FROM_DEVICE; + else + direction = DMA_TO_DEVICE; + + dma_unmap_single(mmc_dev(host->mmc), host->adma_addr, + (128 * 2 + 1) * 4, DMA_TO_DEVICE); + + dma_unmap_single(mmc_dev(host->mmc), host->align_addr, + 128 * 4, direction); + + if (data->flags & MMC_DATA_READ) { + dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg, + data->sg_len, direction); + + align = host->align_buffer; + + for_each_sg(data->sg, sg, host->sg_count, i) { + if (sg_dma_address(sg) & 0x3) { + size = 4 - (sg_dma_address(sg) & 0x3); + + buffer = sdhci_kmap_atomic(sg, &flags); + memcpy(buffer, align, size); + sdhci_kunmap_atomic(buffer, &flags); + + align += 4; + } + } + } + + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, direction); +} + static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) { u8 count; @@ -363,6 +554,7 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data) static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) { u8 count; + u8 ctrl; WARN_ON(host->data); @@ -383,35 +575,104 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) if (host->flags & SDHCI_USE_DMA) host->flags |= SDHCI_REQ_USE_DMA; - if (unlikely((host->flags & SDHCI_REQ_USE_DMA) && - (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) && - ((data->blksz * data->blocks) & 0x3))) { - DBG("Reverting to PIO because of transfer size (%d)\n", - data->blksz * data->blocks); - host->flags &= ~SDHCI_REQ_USE_DMA; + /* + * FIXME: This doesn't account for merging when mapping the + * scatterlist. + */ + if (host->flags & SDHCI_REQ_USE_DMA) { + int broken, i; + struct scatterlist *sg; + + broken = 0; + if (host->flags & SDHCI_USE_ADMA) { + if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE) + broken = 1; + } else { + if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) + broken = 1; + } + + if (unlikely(broken)) { + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->length & 0x3) { + DBG("Reverting to PIO because of " + "transfer size (%d)\n", + sg->length); + host->flags &= ~SDHCI_REQ_USE_DMA; + break; + } + } + } } /* * The assumption here being that alignment is the same after * translation to device address space. */ - if (unlikely((host->flags & SDHCI_REQ_USE_DMA) && - (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && - (data->sg->offset & 0x3))) { - DBG("Reverting to PIO because of bad alignment\n"); - host->flags &= ~SDHCI_REQ_USE_DMA; + if (host->flags & SDHCI_REQ_USE_DMA) { + int broken, i; + struct scatterlist *sg; + + broken = 0; + if (host->flags & SDHCI_USE_ADMA) { + /* + * As we use 3 byte chunks to work around + * alignment problems, we need to check this + * quirk. + */ + if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE) + broken = 1; + } else { + if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) + broken = 1; + } + + if (unlikely(broken)) { + for_each_sg(data->sg, sg, data->sg_len, i) { + if (sg->offset & 0x3) { + DBG("Reverting to PIO because of " + "bad alignment\n"); + host->flags &= ~SDHCI_REQ_USE_DMA; + break; + } + } + } + } + + /* + * Always adjust the DMA selection as some controllers + * (e.g. JMicron) can't do PIO properly when the selection + * is ADMA. + */ + if (host->version >= SDHCI_SPEC_200) { + ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL); + ctrl &= ~SDHCI_CTRL_DMA_MASK; + if ((host->flags & SDHCI_REQ_USE_DMA) && + (host->flags & SDHCI_USE_ADMA)) + ctrl |= SDHCI_CTRL_ADMA32; + else + ctrl |= SDHCI_CTRL_SDMA; + writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); } if (host->flags & SDHCI_REQ_USE_DMA) { - int count; + if (host->flags & SDHCI_USE_ADMA) { + sdhci_adma_table_pre(host, data); + writel(host->adma_addr, + host->ioaddr + SDHCI_ADMA_ADDRESS); + } else { + int count; - count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, - (data->flags & MMC_DATA_READ) ? - DMA_FROM_DEVICE : DMA_TO_DEVICE); - WARN_ON(count != 1); + count = dma_map_sg(mmc_dev(host->mmc), + data->sg, data->sg_len, + (data->flags & MMC_DATA_READ) ? + DMA_FROM_DEVICE : + DMA_TO_DEVICE); + WARN_ON(count != 1); - writel(sg_dma_address(data->sg), - host->ioaddr + SDHCI_DMA_ADDRESS); + writel(sg_dma_address(data->sg), + host->ioaddr + SDHCI_DMA_ADDRESS); + } } else { host->cur_sg = data->sg; host->num_sg = data->sg_len; @@ -457,9 +718,13 @@ static void sdhci_finish_data(struct sdhci_host *host) host->data = NULL; if (host->flags & SDHCI_REQ_USE_DMA) { - dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, - (data->flags & MMC_DATA_READ) ? - DMA_FROM_DEVICE : DMA_TO_DEVICE); + if (host->flags & SDHCI_USE_ADMA) + sdhci_adma_table_post(host, data); + else { + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, (data->flags & MMC_DATA_READ) ? + DMA_FROM_DEVICE : DMA_TO_DEVICE); + } } /* @@ -1008,6 +1273,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) host->data->error = -ETIMEDOUT; else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT)) host->data->error = -EILSEQ; + else if (intmask & SDHCI_INT_ADMA_ERROR) + host->data->error = -EIO; if (host->data->error) sdhci_finish_data(host); @@ -1199,7 +1466,6 @@ int sdhci_add_host(struct sdhci_host *host) { struct mmc_host *mmc; unsigned int caps; - unsigned int version; int ret; WARN_ON(host == NULL); @@ -1213,12 +1479,13 @@ int sdhci_add_host(struct sdhci_host *host) sdhci_reset(host, SDHCI_RESET_ALL); - version = readw(host->ioaddr + SDHCI_HOST_VERSION); - version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT; - if (version > 1) { + host->version = readw(host->ioaddr + SDHCI_HOST_VERSION); + host->version = (host->version & SDHCI_SPEC_VER_MASK) + >> SDHCI_SPEC_VER_SHIFT; + if (host->version > SDHCI_SPEC_200) { printk(KERN_ERR "%s: Unknown controller version (%d). " "You may experience problems.\n", mmc_hostname(mmc), - version); + host->version); } caps = readl(host->ioaddr + SDHCI_CAPABILITIES); @@ -1236,17 +1503,47 @@ int sdhci_add_host(struct sdhci_host *host) host->flags &= ~SDHCI_USE_DMA; } + if (host->flags & SDHCI_USE_DMA) { + if ((host->version >= SDHCI_SPEC_200) && + (caps & SDHCI_CAN_DO_ADMA2)) + host->flags |= SDHCI_USE_ADMA; + } + + if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) && + (host->flags & SDHCI_USE_ADMA)) { + DBG("Disabling ADMA as it is marked broken\n"); + host->flags &= ~SDHCI_USE_ADMA; + } + if (host->flags & SDHCI_USE_DMA) { if (host->ops->enable_dma) { if (host->ops->enable_dma(host)) { printk(KERN_WARNING "%s: No suitable DMA " "available. Falling back to PIO.\n", mmc_hostname(mmc)); - host->flags &= ~SDHCI_USE_DMA; + host->flags &= ~(SDHCI_USE_DMA | SDHCI_USE_ADMA); } } } + if (host->flags & SDHCI_USE_ADMA) { + /* + * We need to allocate descriptors for all sg entries + * (128) and potentially one alignment transfer for + * each of those entries. + */ + host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL); + host->align_buffer = kmalloc(128 * 4, GFP_KERNEL); + if (!host->adma_desc || !host->align_buffer) { + kfree(host->adma_desc); + kfree(host->align_buffer); + printk(KERN_WARNING "%s: Unable to allocate ADMA " + "buffers. Falling back to standard DMA.\n", + mmc_hostname(mmc)); + host->flags &= ~SDHCI_USE_ADMA; + } + } + /* XXX: Hack to get MMC layer to avoid highmem */ if (!(host->flags & SDHCI_USE_DMA)) mmc_dev(host->mmc)->dma_mask = 0; @@ -1298,13 +1595,16 @@ int sdhci_add_host(struct sdhci_host *host) spin_lock_init(&host->lock); /* - * Maximum number of segments. Hardware cannot do scatter lists. + * Maximum number of segments. Depends on if the hardware + * can do scatter/gather or not. */ - if (host->flags & SDHCI_USE_DMA) + if (host->flags & SDHCI_USE_ADMA) + mmc->max_hw_segs = 128; + else if (host->flags & SDHCI_USE_DMA) mmc->max_hw_segs = 1; - else - mmc->max_hw_segs = 16; - mmc->max_phys_segs = 16; + else /* PIO */ + mmc->max_hw_segs = 128; + mmc->max_phys_segs = 128; /* * Maximum number of sectors in one transfer. Limited by DMA boundary @@ -1314,9 +1614,13 @@ int sdhci_add_host(struct sdhci_host *host) /* * Maximum segment size. Could be one segment with the maximum number - * of bytes. + * of bytes. When doing hardware scatter/gather, each entry cannot + * be larger than 64 KiB though. */ - mmc->max_seg_size = mmc->max_req_size; + if (host->flags & SDHCI_USE_ADMA) + mmc->max_seg_size = 65536; + else + mmc->max_seg_size = mmc->max_req_size; /* * Maximum block size. This varies from controller to controller and @@ -1371,8 +1675,9 @@ int sdhci_add_host(struct sdhci_host *host) mmc_add_host(mmc); - printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n", + printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s%s\n", mmc_hostname(mmc), host->hw_name, mmc_dev(mmc)->bus_id, + (host->flags & SDHCI_USE_ADMA)?"A":"", (host->flags & SDHCI_USE_DMA)?"DMA":"PIO"); return 0; @@ -1426,6 +1731,12 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) tasklet_kill(&host->card_tasklet); tasklet_kill(&host->finish_tasklet); + + kfree(host->adma_desc); + kfree(host->align_buffer); + + host->adma_desc = NULL; + host->align_buffer = NULL; } EXPORT_SYMBOL_GPL(sdhci_remove_host); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 7c302515a6a5..5bb355281765 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -60,6 +60,11 @@ #define SDHCI_CTRL_LED 0x01 #define SDHCI_CTRL_4BITBUS 0x02 #define SDHCI_CTRL_HISPD 0x04 +#define SDHCI_CTRL_DMA_MASK 0x18 +#define SDHCI_CTRL_SDMA 0x00 +#define SDHCI_CTRL_ADMA1 0x08 +#define SDHCI_CTRL_ADMA32 0x10 +#define SDHCI_CTRL_ADMA64 0x18 #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 @@ -105,6 +110,7 @@ #define SDHCI_INT_DATA_END_BIT 0x00400000 #define SDHCI_INT_BUS_POWER 0x00800000 #define SDHCI_INT_ACMD12ERR 0x01000000 +#define SDHCI_INT_ADMA_ERROR 0x02000000 #define SDHCI_INT_NORMAL_MASK 0x00007FFF #define SDHCI_INT_ERROR_MASK 0xFFFF8000 @@ -128,11 +134,14 @@ #define SDHCI_CLOCK_BASE_SHIFT 8 #define SDHCI_MAX_BLOCK_MASK 0x00030000 #define SDHCI_MAX_BLOCK_SHIFT 16 +#define SDHCI_CAN_DO_ADMA2 0x00080000 +#define SDHCI_CAN_DO_ADMA1 0x00100000 #define SDHCI_CAN_DO_HISPD 0x00200000 #define SDHCI_CAN_DO_DMA 0x00400000 #define SDHCI_CAN_VDD_330 0x01000000 #define SDHCI_CAN_VDD_300 0x02000000 #define SDHCI_CAN_VDD_180 0x04000000 +#define SDHCI_CAN_64BIT 0x10000000 /* 44-47 reserved for more caps */ @@ -140,7 +149,16 @@ /* 4C-4F reserved for more max current */ -/* 50-FB reserved */ +#define SDHCI_SET_ACMD12_ERROR 0x50 +#define SDHCI_SET_INT_ERROR 0x52 + +#define SDHCI_ADMA_ERROR 0x54 + +/* 55-57 reserved */ + +#define SDHCI_ADMA_ADDRESS 0x58 + +/* 60-FB reserved */ #define SDHCI_SLOT_INT_STATUS 0xFC @@ -149,6 +167,8 @@ #define SDHCI_VENDOR_VER_SHIFT 8 #define SDHCI_SPEC_VER_MASK 0x00FF #define SDHCI_SPEC_VER_SHIFT 0 +#define SDHCI_SPEC_100 0 +#define SDHCI_SPEC_200 1 struct sdhci_ops; @@ -170,16 +190,20 @@ struct sdhci_host { #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) /* Controller has an unusable DMA engine */ #define SDHCI_QUIRK_BROKEN_DMA (1<<5) +/* Controller has an unusable ADMA engine */ +#define SDHCI_QUIRK_BROKEN_ADMA (1<<6) /* Controller can only DMA from 32-bit aligned addresses */ -#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<6) +#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7) /* Controller can only DMA chunk sizes that are a multiple of 32 bits */ -#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7) +#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8) +/* Controller can only ADMA chunks that are a multiple of 32 bits */ +#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9) /* Controller needs to be reset after each request to stay stable */ -#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8) +#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10) /* Controller needs voltage and power writes to happen separately */ -#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9) +#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) /* Controller provides an incorrect timeout value for transfers */ -#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<10) +#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ @@ -197,8 +221,11 @@ struct sdhci_host { int flags; /* Host attributes */ #define SDHCI_USE_DMA (1<<0) /* Host is DMA capable */ -#define SDHCI_REQ_USE_DMA (1<<1) /* Use DMA for this req. */ -#define SDHCI_DEVICE_DEAD (1<<2) /* Device unresponsive */ +#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */ +#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ +#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ + + unsigned int version; /* SDHCI spec. version */ unsigned int max_clk; /* Max possible freq (MHz) */ unsigned int timeout_clk; /* Timeout freq (KHz) */ @@ -216,6 +243,14 @@ struct sdhci_host { int offset; /* Offset into current sg */ int remain; /* Bytes left in current */ + int sg_count; /* Mapped sg entries */ + + u8 *adma_desc; /* ADMA descriptor table */ + u8 *align_buffer; /* Bounce buffer */ + + dma_addr_t adma_addr; /* Mapped ADMA descr. table */ + dma_addr_t align_addr; /* Mapped bounce buffer */ + struct tasklet_struct card_tasklet; /* Tasklet structures */ struct tasklet_struct finish_tasklet; -- cgit v1.2.3 From 979ce7208a679b8d012450610d5d5aa75aab3af9 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 29 Jun 2008 12:19:47 +0200 Subject: mmc_block: wait for card even on failures Many failures are non-permanent, but the card might need some time to finish what it is doing before becoming responsive again. Make sure we wait for it to finish programming before dealing with the error. Signed-off-by: Pierre Ossman --- drivers/mmc/card/block.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index f9ad960d7c1a..4b0f8220f153 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -2,7 +2,7 @@ * Block driver for media (i.e., flash cards) * * Copyright 2002 Hewlett-Packard Company - * Copyright 2005-2007 Pierre Ossman + * Copyright 2005-2008 Pierre Ossman * * Use consistent with the GNU GPL is permitted, * provided that this copyright notice is @@ -296,22 +296,24 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) mmc_queue_bounce_post(mq); + /* + * Check for errors here, but don't jump to cmd_err + * until later as we need to wait for the card to leave + * programming mode even when things go wrong. + */ if (brq.cmd.error) { printk(KERN_ERR "%s: error %d sending read/write command\n", req->rq_disk->disk_name, brq.cmd.error); - goto cmd_err; } if (brq.data.error) { printk(KERN_ERR "%s: error %d transferring data\n", req->rq_disk->disk_name, brq.data.error); - goto cmd_err; } if (brq.stop.error) { printk(KERN_ERR "%s: error %d sending stop command\n", req->rq_disk->disk_name, brq.stop.error); - goto cmd_err; } if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) { @@ -344,6 +346,9 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) #endif } + if (brq.cmd.error || brq.data.error || brq.stop.error) + goto cmd_err; + /* * A block was successfully transferred. */ -- cgit v1.2.3 From 6b174931a73177c6519f87e6a8d5ae6ba269cdb5 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Mon, 30 Jun 2008 09:09:27 +0200 Subject: mmc_test: cleanup Clean up and reorganise the mmc_test driver so that it (hopefully) is easier to extend with more complex tests. Signed-off-by: Pierre Ossman --- drivers/mmc/card/mmc_test.c | 554 +++++++++++++++++++++++++++++--------------- 1 file changed, 364 insertions(+), 190 deletions(-) diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index 8e0bb12d048d..d6b9b486417c 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -26,13 +26,17 @@ struct mmc_test_card { struct mmc_card *card; + u8 scratch[BUFFER_SIZE]; u8 *buffer; }; /*******************************************************************/ -/* Helper functions */ +/* General helper functions */ /*******************************************************************/ +/* + * Configure correct block size in card + */ static int mmc_test_set_blksize(struct mmc_test_card *test, unsigned size) { struct mmc_command cmd; @@ -48,117 +52,61 @@ static int mmc_test_set_blksize(struct mmc_test_card *test, unsigned size) return 0; } -static int __mmc_test_transfer(struct mmc_test_card *test, int write, - unsigned broken_xfer, u8 *buffer, unsigned addr, - unsigned blocks, unsigned blksz) +/* + * Fill in the mmc_request structure given a set of transfer parameters. + */ +static void mmc_test_prepare_mrq(struct mmc_test_card *test, + struct mmc_request *mrq, struct scatterlist *sg, unsigned sg_len, + unsigned dev_addr, unsigned blocks, unsigned blksz, int write) { - int ret, busy; + BUG_ON(!mrq || !mrq->cmd || !mrq->data || !mrq->stop); - struct mmc_request mrq; - struct mmc_command cmd; - struct mmc_command stop; - struct mmc_data data; - - struct scatterlist sg; - - memset(&mrq, 0, sizeof(struct mmc_request)); - - mrq.cmd = &cmd; - mrq.data = &data; - - memset(&cmd, 0, sizeof(struct mmc_command)); - - if (broken_xfer) { - if (blocks > 1) { - cmd.opcode = write ? - MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK; - } else { - cmd.opcode = MMC_SEND_STATUS; - } + if (blocks > 1) { + mrq->cmd->opcode = write ? + MMC_WRITE_MULTIPLE_BLOCK : MMC_READ_MULTIPLE_BLOCK; } else { - if (blocks > 1) { - cmd.opcode = write ? - MMC_WRITE_MULTIPLE_BLOCK : MMC_READ_MULTIPLE_BLOCK; - } else { - cmd.opcode = write ? - MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK; - } + mrq->cmd->opcode = write ? + MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK; } - if (broken_xfer && blocks == 1) - cmd.arg = test->card->rca << 16; - else - cmd.arg = addr; - cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; - - memset(&stop, 0, sizeof(struct mmc_command)); - - if (!broken_xfer && (blocks > 1)) { - stop.opcode = MMC_STOP_TRANSMISSION; - stop.arg = 0; - stop.flags = MMC_RSP_R1B | MMC_CMD_AC; + mrq->cmd->arg = dev_addr; + mrq->cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC; - mrq.stop = &stop; + if (blocks == 1) + mrq->stop = NULL; + else { + mrq->stop->opcode = MMC_STOP_TRANSMISSION; + mrq->stop->arg = 0; + mrq->stop->flags = MMC_RSP_R1B | MMC_CMD_AC; } - memset(&data, 0, sizeof(struct mmc_data)); - - data.blksz = blksz; - data.blocks = blocks; - data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ; - data.sg = &sg; - data.sg_len = 1; - - sg_init_one(&sg, buffer, blocks * blksz); + mrq->data->blksz = blksz; + mrq->data->blocks = blocks; + mrq->data->flags = write ? MMC_DATA_WRITE : MMC_DATA_READ; + mrq->data->sg = sg; + mrq->data->sg_len = sg_len; - mmc_set_data_timeout(&data, test->card); - - mmc_wait_for_req(test->card->host, &mrq); - - ret = 0; - - if (broken_xfer) { - if (!ret && cmd.error) - ret = cmd.error; - if (!ret && data.error == 0) - ret = RESULT_FAIL; - if (!ret && data.error != -ETIMEDOUT) - ret = data.error; - if (!ret && stop.error) - ret = stop.error; - if (blocks > 1) { - if (!ret && data.bytes_xfered > blksz) - ret = RESULT_FAIL; - } else { - if (!ret && data.bytes_xfered > 0) - ret = RESULT_FAIL; - } - } else { - if (!ret && cmd.error) - ret = cmd.error; - if (!ret && data.error) - ret = data.error; - if (!ret && stop.error) - ret = stop.error; - if (!ret && data.bytes_xfered != blocks * blksz) - ret = RESULT_FAIL; - } + mmc_set_data_timeout(mrq->data, test->card); +} - if (ret == -EINVAL) - ret = RESULT_UNSUP_HOST; +/* + * Wait for the card to finish the busy state + */ +static int mmc_test_wait_busy(struct mmc_test_card *test) +{ + int ret, busy; + struct mmc_command cmd; busy = 0; do { - int ret2; - memset(&cmd, 0, sizeof(struct mmc_command)); cmd.opcode = MMC_SEND_STATUS; cmd.arg = test->card->rca << 16; cmd.flags = MMC_RSP_R1 | MMC_CMD_AC; - ret2 = mmc_wait_for_cmd(test->card->host, &cmd, 0); - if (ret2) + ret = mmc_wait_for_cmd(test->card->host, &cmd, 0); + if (ret) break; if (!busy && !(cmd.resp[0] & R1_READY_FOR_DATA)) { @@ -172,14 +120,57 @@ static int __mmc_test_transfer(struct mmc_test_card *test, int write, return ret; } -static int mmc_test_transfer(struct mmc_test_card *test, int write, - u8 *buffer, unsigned addr, unsigned blocks, unsigned blksz) +/* + * Transfer a single sector of kernel addressable data + */ +static int mmc_test_buffer_transfer(struct mmc_test_card *test, + u8 *buffer, unsigned addr, unsigned blksz, int write) { - return __mmc_test_transfer(test, write, 0, buffer, - addr, blocks, blksz); + int ret; + + struct mmc_request mrq; + struct mmc_command cmd; + struct mmc_command stop; + struct mmc_data data; + + struct scatterlist sg; + + memset(&mrq, 0, sizeof(struct mmc_request)); + memset(&cmd, 0, sizeof(struct mmc_command)); + memset(&data, 0, sizeof(struct mmc_data)); + memset(&stop, 0, sizeof(struct mmc_command)); + + mrq.cmd = &cmd; + mrq.data = &data; + mrq.stop = &stop; + + sg_init_one(&sg, buffer, blksz); + + mmc_test_prepare_mrq(test, &mrq, &sg, 1, addr, 1, blksz, write); + + mmc_wait_for_req(test->card->host, &mrq); + + if (cmd.error) + return cmd.error; + if (data.error) + return data.error; + + ret = mmc_test_wait_busy(test); + if (ret) + return ret; + + return 0; } -static int mmc_test_prepare_verify(struct mmc_test_card *test, int write) +/*******************************************************************/ +/* Test preparation and cleanup */ +/*******************************************************************/ + +/* + * Fill the first couple of sectors of the card with known data + * so that bad reads/writes can be detected + */ +static int __mmc_test_prepare(struct mmc_test_card *test, int write) { int ret, i; @@ -188,15 +179,14 @@ static int mmc_test_prepare_verify(struct mmc_test_card *test, int write) return ret; if (write) - memset(test->buffer, 0xDF, BUFFER_SIZE); + memset(test->buffer, 0xDF, 512); else { - for (i = 0;i < BUFFER_SIZE;i++) + for (i = 0;i < 512;i++) test->buffer[i] = i; } for (i = 0;i < BUFFER_SIZE / 512;i++) { - ret = mmc_test_transfer(test, 1, test->buffer + i * 512, - i * 512, 1, 512); + ret = mmc_test_buffer_transfer(test, test->buffer, i * 512, 512, 1); if (ret) return ret; } @@ -204,41 +194,218 @@ static int mmc_test_prepare_verify(struct mmc_test_card *test, int write) return 0; } -static int mmc_test_prepare_verify_write(struct mmc_test_card *test) +static int mmc_test_prepare_write(struct mmc_test_card *test) +{ + return __mmc_test_prepare(test, 1); +} + +static int mmc_test_prepare_read(struct mmc_test_card *test) +{ + return __mmc_test_prepare(test, 0); +} + +static int mmc_test_cleanup(struct mmc_test_card *test) +{ + int ret, i; + + ret = mmc_test_set_blksize(test, 512); + if (ret) + return ret; + + memset(test->buffer, 0, 512); + + for (i = 0;i < BUFFER_SIZE / 512;i++) { + ret = mmc_test_buffer_transfer(test, test->buffer, i * 512, 512, 1); + if (ret) + return ret; + } + + return 0; +} + +/*******************************************************************/ +/* Test execution helpers */ +/*******************************************************************/ + +/* + * Modifies the mmc_request to perform the "short transfer" tests + */ +static void mmc_test_prepare_broken_mrq(struct mmc_test_card *test, + struct mmc_request *mrq, int write) +{ + BUG_ON(!mrq || !mrq->cmd || !mrq->data); + + if (mrq->data->blocks > 1) { + mrq->cmd->opcode = write ? + MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK; + mrq->stop = NULL; + } else { + mrq->cmd->opcode = MMC_SEND_STATUS; + mrq->cmd->arg = test->card->rca << 16; + } +} + +/* + * Checks that a normal transfer didn't have any errors + */ +static int mmc_test_check_result(struct mmc_test_card *test, + struct mmc_request *mrq) { - return mmc_test_prepare_verify(test, 1); + int ret; + + BUG_ON(!mrq || !mrq->cmd || !mrq->data); + + ret = 0; + + if (!ret && mrq->cmd->error) + ret = mrq->cmd->error; + if (!ret && mrq->data->error) + ret = mrq->data->error; + if (!ret && mrq->stop && mrq->stop->error) + ret = mrq->stop->error; + if (!ret && mrq->data->bytes_xfered != + mrq->data->blocks * mrq->data->blksz) + ret = RESULT_FAIL; + + if (ret == -EINVAL) + ret = RESULT_UNSUP_HOST; + + return ret; } -static int mmc_test_prepare_verify_read(struct mmc_test_card *test) +/* + * Checks that a "short transfer" behaved as expected + */ +static int mmc_test_check_broken_result(struct mmc_test_card *test, + struct mmc_request *mrq) { - return mmc_test_prepare_verify(test, 0); + int ret; + + BUG_ON(!mrq || !mrq->cmd || !mrq->data); + + ret = 0; + + if (!ret && mrq->cmd->error) + ret = mrq->cmd->error; + if (!ret && mrq->data->error == 0) + ret = RESULT_FAIL; + if (!ret && mrq->data->error != -ETIMEDOUT) + ret = mrq->data->error; + if (!ret && mrq->stop && mrq->stop->error) + ret = mrq->stop->error; + if (mrq->data->blocks > 1) { + if (!ret && mrq->data->bytes_xfered > mrq->data->blksz) + ret = RESULT_FAIL; + } else { + if (!ret && mrq->data->bytes_xfered > 0) + ret = RESULT_FAIL; + } + + if (ret == -EINVAL) + ret = RESULT_UNSUP_HOST; + + return ret; } -static int mmc_test_verified_transfer(struct mmc_test_card *test, int write, - u8 *buffer, unsigned addr, unsigned blocks, unsigned blksz) +/* + * Tests a basic transfer with certain parameters + */ +static int mmc_test_simple_transfer(struct mmc_test_card *test, + struct scatterlist *sg, unsigned sg_len, unsigned dev_addr, + unsigned blocks, unsigned blksz, int write) { - int ret, i, sectors; + struct mmc_request mrq; + struct mmc_command cmd; + struct mmc_command stop; + struct mmc_data data; - /* - * It is assumed that the above preparation has been done. - */ + memset(&mrq, 0, sizeof(struct mmc_request)); + memset(&cmd, 0, sizeof(struct mmc_command)); + memset(&data, 0, sizeof(struct mmc_data)); + memset(&stop, 0, sizeof(struct mmc_command)); + + mrq.cmd = &cmd; + mrq.data = &data; + mrq.stop = &stop; + + mmc_test_prepare_mrq(test, &mrq, sg, sg_len, dev_addr, + blocks, blksz, write); + + mmc_wait_for_req(test->card->host, &mrq); - memset(test->buffer, 0, BUFFER_SIZE); + mmc_test_wait_busy(test); + + return mmc_test_check_result(test, &mrq); +} + +/* + * Tests a transfer where the card will fail completely or partly + */ +static int mmc_test_broken_transfer(struct mmc_test_card *test, + unsigned blocks, unsigned blksz, int write) +{ + struct mmc_request mrq; + struct mmc_command cmd; + struct mmc_command stop; + struct mmc_data data; + + struct scatterlist sg; + + memset(&mrq, 0, sizeof(struct mmc_request)); + memset(&cmd, 0, sizeof(struct mmc_command)); + memset(&data, 0, sizeof(struct mmc_data)); + memset(&stop, 0, sizeof(struct mmc_command)); + + mrq.cmd = &cmd; + mrq.data = &data; + mrq.stop = &stop; + + sg_init_one(&sg, test->buffer, blocks * blksz); + + mmc_test_prepare_mrq(test, &mrq, &sg, 1, 0, blocks, blksz, write); + mmc_test_prepare_broken_mrq(test, &mrq, write); + + mmc_wait_for_req(test->card->host, &mrq); + + mmc_test_wait_busy(test); + + return mmc_test_check_broken_result(test, &mrq); +} + +/* + * Does a complete transfer test where data is also validated + * + * Note: mmc_test_prepare() must have been done before this call + */ +static int mmc_test_transfer(struct mmc_test_card *test, + struct scatterlist *sg, unsigned sg_len, unsigned dev_addr, + unsigned blocks, unsigned blksz, int write) +{ + int ret, i; + unsigned long flags; if (write) { for (i = 0;i < blocks * blksz;i++) - buffer[i] = i; + test->scratch[i] = i; + } else { + memset(test->scratch, 0, BUFFER_SIZE); } + local_irq_save(flags); + sg_copy_from_buffer(sg, sg_len, test->scratch, BUFFER_SIZE); + local_irq_restore(flags); ret = mmc_test_set_blksize(test, blksz); if (ret) return ret; - ret = mmc_test_transfer(test, write, buffer, addr, blocks, blksz); + ret = mmc_test_simple_transfer(test, sg, sg_len, dev_addr, + blocks, blksz, write); if (ret) return ret; if (write) { + int sectors; + ret = mmc_test_set_blksize(test, 512); if (ret) return ret; @@ -253,9 +420,9 @@ static int mmc_test_verified_transfer(struct mmc_test_card *test, int write, memset(test->buffer, 0, sectors * 512); for (i = 0;i < sectors;i++) { - ret = mmc_test_transfer(test, 0, + ret = mmc_test_buffer_transfer(test, test->buffer + i * 512, - addr + i * 512, 1, 512); + dev_addr + i * 512, 512, 0); if (ret) return ret; } @@ -270,8 +437,11 @@ static int mmc_test_verified_transfer(struct mmc_test_card *test, int write, return RESULT_FAIL; } } else { + local_irq_save(flags); + sg_copy_to_buffer(sg, sg_len, test->scratch, BUFFER_SIZE); + local_irq_restore(flags); for (i = 0;i < blocks * blksz;i++) { - if (buffer[i] != (u8)i) + if (test->scratch[i] != (u8)i) return RESULT_FAIL; } } @@ -279,26 +449,6 @@ static int mmc_test_verified_transfer(struct mmc_test_card *test, int write, return 0; } -static int mmc_test_cleanup_verify(struct mmc_test_card *test) -{ - int ret, i; - - ret = mmc_test_set_blksize(test, 512); - if (ret) - return ret; - - memset(test->buffer, 0, BUFFER_SIZE); - - for (i = 0;i < BUFFER_SIZE / 512;i++) { - ret = mmc_test_transfer(test, 1, test->buffer + i * 512, - i * 512, 1, 512); - if (ret) - return ret; - } - - return 0; -} - /*******************************************************************/ /* Tests */ /*******************************************************************/ @@ -314,12 +464,15 @@ struct mmc_test_case { static int mmc_test_basic_write(struct mmc_test_card *test) { int ret; + struct scatterlist sg; ret = mmc_test_set_blksize(test, 512); if (ret) return ret; - ret = mmc_test_transfer(test, 1, test->buffer, 0, 1, 512); + sg_init_one(&sg, test->buffer, 512); + + ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1); if (ret) return ret; @@ -329,12 +482,15 @@ static int mmc_test_basic_write(struct mmc_test_card *test) static int mmc_test_basic_read(struct mmc_test_card *test) { int ret; + struct scatterlist sg; ret = mmc_test_set_blksize(test, 512); if (ret) return ret; - ret = mmc_test_transfer(test, 0, test->buffer, 0, 1, 512); + sg_init_one(&sg, test->buffer, 512); + + ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1); if (ret) return ret; @@ -344,8 +500,11 @@ static int mmc_test_basic_read(struct mmc_test_card *test) static int mmc_test_verify_write(struct mmc_test_card *test) { int ret; + struct scatterlist sg; + + sg_init_one(&sg, test->buffer, 512); - ret = mmc_test_verified_transfer(test, 1, test->buffer, 0, 1, 512); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 1); if (ret) return ret; @@ -355,8 +514,11 @@ static int mmc_test_verify_write(struct mmc_test_card *test) static int mmc_test_verify_read(struct mmc_test_card *test) { int ret; + struct scatterlist sg; + + sg_init_one(&sg, test->buffer, 512); - ret = mmc_test_verified_transfer(test, 0, test->buffer, 0, 1, 512); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 0); if (ret) return ret; @@ -367,6 +529,7 @@ static int mmc_test_multi_write(struct mmc_test_card *test) { int ret; unsigned int size; + struct scatterlist sg; if (test->card->host->max_blk_count == 1) return RESULT_UNSUP_HOST; @@ -379,8 +542,9 @@ static int mmc_test_multi_write(struct mmc_test_card *test) if (size < 1024) return RESULT_UNSUP_HOST; - ret = mmc_test_verified_transfer(test, 1, test->buffer, 0, - size / 512, 512); + sg_init_one(&sg, test->buffer, size); + + ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1); if (ret) return ret; @@ -391,6 +555,7 @@ static int mmc_test_multi_read(struct mmc_test_card *test) { int ret; unsigned int size; + struct scatterlist sg; if (test->card->host->max_blk_count == 1) return RESULT_UNSUP_HOST; @@ -403,8 +568,9 @@ static int mmc_test_multi_read(struct mmc_test_card *test) if (size < 1024) return RESULT_UNSUP_HOST; - ret = mmc_test_verified_transfer(test, 0, test->buffer, 0, - size / 512, 512); + sg_init_one(&sg, test->buffer, size); + + ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0); if (ret) return ret; @@ -414,13 +580,14 @@ static int mmc_test_multi_read(struct mmc_test_card *test) static int mmc_test_pow2_write(struct mmc_test_card *test) { int ret, i; + struct scatterlist sg; if (!test->card->csd.write_partial) return RESULT_UNSUP_CARD; for (i = 1; i < 512;i <<= 1) { - ret = mmc_test_verified_transfer(test, 1, - test->buffer, 0, 1, i); + sg_init_one(&sg, test->buffer, i); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 1); if (ret) return ret; } @@ -431,13 +598,14 @@ static int mmc_test_pow2_write(struct mmc_test_card *test) static int mmc_test_pow2_read(struct mmc_test_card *test) { int ret, i; + struct scatterlist sg; if (!test->card->csd.read_partial) return RESULT_UNSUP_CARD; for (i = 1; i < 512;i <<= 1) { - ret = mmc_test_verified_transfer(test, 0, - test->buffer, 0, 1, i); + sg_init_one(&sg, test->buffer, i); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 0); if (ret) return ret; } @@ -448,13 +616,14 @@ static int mmc_test_pow2_read(struct mmc_test_card *test) static int mmc_test_weird_write(struct mmc_test_card *test) { int ret, i; + struct scatterlist sg; if (!test->card->csd.write_partial) return RESULT_UNSUP_CARD; for (i = 3; i < 512;i += 7) { - ret = mmc_test_verified_transfer(test, 1, - test->buffer, 0, 1, i); + sg_init_one(&sg, test->buffer, i); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 1); if (ret) return ret; } @@ -465,13 +634,14 @@ static int mmc_test_weird_write(struct mmc_test_card *test) static int mmc_test_weird_read(struct mmc_test_card *test) { int ret, i; + struct scatterlist sg; if (!test->card->csd.read_partial) return RESULT_UNSUP_CARD; for (i = 3; i < 512;i += 7) { - ret = mmc_test_verified_transfer(test, 0, - test->buffer, 0, 1, i); + sg_init_one(&sg, test->buffer, i); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, i, 0); if (ret) return ret; } @@ -482,10 +652,11 @@ static int mmc_test_weird_read(struct mmc_test_card *test) static int mmc_test_align_write(struct mmc_test_card *test) { int ret, i; + struct scatterlist sg; for (i = 1;i < 4;i++) { - ret = mmc_test_verified_transfer(test, 1, test->buffer + i, - 0, 1, 512); + sg_init_one(&sg, test->buffer + i, 512); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 1); if (ret) return ret; } @@ -496,10 +667,11 @@ static int mmc_test_align_write(struct mmc_test_card *test) static int mmc_test_align_read(struct mmc_test_card *test) { int ret, i; + struct scatterlist sg; for (i = 1;i < 4;i++) { - ret = mmc_test_verified_transfer(test, 0, test->buffer + i, - 0, 1, 512); + sg_init_one(&sg, test->buffer + i, 512); + ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 0); if (ret) return ret; } @@ -511,6 +683,7 @@ static int mmc_test_align_multi_write(struct mmc_test_card *test) { int ret, i; unsigned int size; + struct scatterlist sg; if (test->card->host->max_blk_count == 1) return RESULT_UNSUP_HOST; @@ -524,8 +697,8 @@ static int mmc_test_align_multi_write(struct mmc_test_card *test) return RESULT_UNSUP_HOST; for (i = 1;i < 4;i++) { - ret = mmc_test_verified_transfer(test, 1, test->buffer + i, - 0, size / 512, 512); + sg_init_one(&sg, test->buffer + i, size); + ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1); if (ret) return ret; } @@ -537,6 +710,7 @@ static int mmc_test_align_multi_read(struct mmc_test_card *test) { int ret, i; unsigned int size; + struct scatterlist sg; if (test->card->host->max_blk_count == 1) return RESULT_UNSUP_HOST; @@ -550,8 +724,8 @@ static int mmc_test_align_multi_read(struct mmc_test_card *test) return RESULT_UNSUP_HOST; for (i = 1;i < 4;i++) { - ret = mmc_test_verified_transfer(test, 0, test->buffer + i, - 0, size / 512, 512); + sg_init_one(&sg, test->buffer + i, size); + ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0); if (ret) return ret; } @@ -567,7 +741,7 @@ static int mmc_test_xfersize_write(struct mmc_test_card *test) if (ret) return ret; - ret = __mmc_test_transfer(test, 1, 1, test->buffer, 0, 1, 512); + ret = mmc_test_broken_transfer(test, 1, 512, 1); if (ret) return ret; @@ -582,7 +756,7 @@ static int mmc_test_xfersize_read(struct mmc_test_card *test) if (ret) return ret; - ret = __mmc_test_transfer(test, 0, 1, test->buffer, 0, 1, 512); + ret = mmc_test_broken_transfer(test, 1, 512, 0); if (ret) return ret; @@ -600,7 +774,7 @@ static int mmc_test_multi_xfersize_write(struct mmc_test_card *test) if (ret) return ret; - ret = __mmc_test_transfer(test, 1, 1, test->buffer, 0, 2, 512); + ret = mmc_test_broken_transfer(test, 2, 512, 1); if (ret) return ret; @@ -618,7 +792,7 @@ static int mmc_test_multi_xfersize_read(struct mmc_test_card *test) if (ret) return ret; - ret = __mmc_test_transfer(test, 0, 1, test->buffer, 0, 2, 512); + ret = mmc_test_broken_transfer(test, 2, 512, 0); if (ret) return ret; @@ -638,86 +812,86 @@ static const struct mmc_test_case mmc_test_cases[] = { { .name = "Basic write (with data verification)", - .prepare = mmc_test_prepare_verify_write, + .prepare = mmc_test_prepare_write, .run = mmc_test_verify_write, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Basic read (with data verification)", - .prepare = mmc_test_prepare_verify_read, + .prepare = mmc_test_prepare_read, .run = mmc_test_verify_read, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Multi-block write", - .prepare = mmc_test_prepare_verify_write, + .prepare = mmc_test_prepare_write, .run = mmc_test_multi_write, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Multi-block read", - .prepare = mmc_test_prepare_verify_read, + .prepare = mmc_test_prepare_read, .run = mmc_test_multi_read, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Power of two block writes", - .prepare = mmc_test_prepare_verify_write, + .prepare = mmc_test_prepare_write, .run = mmc_test_pow2_write, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Power of two block reads", - .prepare = mmc_test_prepare_verify_read, + .prepare = mmc_test_prepare_read, .run = mmc_test_pow2_read, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Weird sized block writes", - .prepare = mmc_test_prepare_verify_write, + .prepare = mmc_test_prepare_write, .run = mmc_test_weird_write, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Weird sized block reads", - .prepare = mmc_test_prepare_verify_read, + .prepare = mmc_test_prepare_read, .run = mmc_test_weird_read, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Badly aligned write", - .prepare = mmc_test_prepare_verify_write, + .prepare = mmc_test_prepare_write, .run = mmc_test_align_write, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Badly aligned read", - .prepare = mmc_test_prepare_verify_read, + .prepare = mmc_test_prepare_read, .run = mmc_test_align_read, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Badly aligned multi-block write", - .prepare = mmc_test_prepare_verify_write, + .prepare = mmc_test_prepare_write, .run = mmc_test_align_multi_write, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { .name = "Badly aligned multi-block read", - .prepare = mmc_test_prepare_verify_read, + .prepare = mmc_test_prepare_read, .run = mmc_test_align_multi_read, - .cleanup = mmc_test_cleanup_verify, + .cleanup = mmc_test_cleanup, }, { -- cgit v1.2.3 From 8f1934ce784bd8f2eaf06f190526500f7f3f9c74 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Mon, 30 Jun 2008 21:15:49 +0200 Subject: sdhci: graceful handling of bad addresses Be a bit more robust and fall back to PIO if someone is feeding us bogus addresses. Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 77 +++++++++++++++++++++++++++++++++++------------- 1 file changed, 57 insertions(+), 20 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index b802044ea940..d3e4a391e351 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -327,7 +327,7 @@ static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags) local_irq_restore(*flags); } -static void sdhci_adma_table_pre(struct sdhci_host *host, +static int sdhci_adma_table_pre(struct sdhci_host *host, struct mmc_data *data) { int direction; @@ -360,10 +360,14 @@ static void sdhci_adma_table_pre(struct sdhci_host *host, host->align_addr = dma_map_single(mmc_dev(host->mmc), host->align_buffer, 128 * 4, direction); + if (dma_mapping_error(host->align_addr)) + goto fail; BUG_ON(host->align_addr & 0x3); host->sg_count = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, direction); + if (host->sg_count == 0) + goto unmap_align; desc = host->adma_desc; align = host->align_buffer; @@ -457,7 +461,20 @@ static void sdhci_adma_table_pre(struct sdhci_host *host, host->adma_addr = dma_map_single(mmc_dev(host->mmc), host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE); + if (dma_mapping_error(host->align_addr)) + goto unmap_entries; BUG_ON(host->adma_addr & 0x3); + + return 0; + +unmap_entries: + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, direction); +unmap_align: + dma_unmap_single(mmc_dev(host->mmc), host->align_addr, + 128 * 4, direction); +fail: + return -EINVAL; } static void sdhci_adma_table_post(struct sdhci_host *host, @@ -555,6 +572,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) { u8 count; u8 ctrl; + int ret; WARN_ON(host->data); @@ -639,6 +657,43 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) } } + if (host->flags & SDHCI_REQ_USE_DMA) { + if (host->flags & SDHCI_USE_ADMA) { + ret = sdhci_adma_table_pre(host, data); + if (ret) { + /* + * This only happens when someone fed + * us an invalid request. + */ + WARN_ON(1); + host->flags &= ~SDHCI_USE_DMA; + } else { + writel(host->adma_addr, + host->ioaddr + SDHCI_ADMA_ADDRESS); + } + } else { + int count; + + count = dma_map_sg(mmc_dev(host->mmc), + data->sg, data->sg_len, + (data->flags & MMC_DATA_READ) ? + DMA_FROM_DEVICE : + DMA_TO_DEVICE); + if (count == 0) { + /* + * This only happens when someone fed + * us an invalid request. + */ + WARN_ON(1); + host->flags &= ~SDHCI_USE_DMA; + } else { + WARN_ON(count != 1); + writel(sg_dma_address(data->sg), + host->ioaddr + SDHCI_DMA_ADDRESS); + } + } + } + /* * Always adjust the DMA selection as some controllers * (e.g. JMicron) can't do PIO properly when the selection @@ -655,25 +710,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL); } - if (host->flags & SDHCI_REQ_USE_DMA) { - if (host->flags & SDHCI_USE_ADMA) { - sdhci_adma_table_pre(host, data); - writel(host->adma_addr, - host->ioaddr + SDHCI_ADMA_ADDRESS); - } else { - int count; - - count = dma_map_sg(mmc_dev(host->mmc), - data->sg, data->sg_len, - (data->flags & MMC_DATA_READ) ? - DMA_FROM_DEVICE : - DMA_TO_DEVICE); - WARN_ON(count != 1); - - writel(sg_dma_address(data->sg), - host->ioaddr + SDHCI_DMA_ADDRESS); - } - } else { + if (!(host->flags & SDHCI_REQ_USE_DMA)) { host->cur_sg = data->sg; host->num_sg = data->sg_len; -- cgit v1.2.3 From be518018c6b9224c02284fb243207ef741c31ec6 Mon Sep 17 00:00:00 2001 From: Thomas Kleffel Date: Mon, 30 Jun 2008 22:40:24 +0100 Subject: MMC: S3C24XX MMC/SD driver. This is the latest S3C MMC/SD driver by Thomas Kleffel with cleanups as suggested by AKPM done by Ben Dooks. Signed-off-by: Ben Dooks Signed-off-by: Thomas Kleffel Signed-off-by: Pierre Ossman --- drivers/mmc/host/Kconfig | 11 + drivers/mmc/host/Makefile | 2 +- drivers/mmc/host/s3cmci.c | 1343 +++++++++++++++++++++++++++++++ drivers/mmc/host/s3cmci.h | 69 ++ include/asm-arm/arch-s3c2410/regs-sdi.h | 20 +- 5 files changed, 1441 insertions(+), 4 deletions(-) create mode 100644 drivers/mmc/host/s3cmci.c create mode 100644 drivers/mmc/host/s3cmci.h diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index f9cbcb891e99..dc88c03662ab 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -143,3 +143,14 @@ config MMC_SPI If unsure, or if your system has no SPI master driver, say N. +config MMC_S3C + tristate "Samsung S3C SD/MMC Card Interface support" + depends on ARCH_S3C2410 && MMC + help + This selects a driver for the MCI interface found in + Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. + If you have a board based on one of those and a MMC/SD + slot, say Y or M here. + + If unsure, say N. + diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 3027250b8555..b3e023bf8c78 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -18,4 +18,4 @@ obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_AT91) += at91_mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o - +obj-$(CONFIG_MMC_S3C) += s3cmci.o diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c new file mode 100644 index 000000000000..c6a4d3cadf2b --- /dev/null +++ b/drivers/mmc/host/s3cmci.c @@ -0,0 +1,1343 @@ +/* + * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver + * + * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include "s3cmci.h" + +#define DRIVER_NAME "s3c-mci" + +enum dbg_channels { + dbg_err = (1 << 0), + dbg_debug = (1 << 1), + dbg_info = (1 << 2), + dbg_irq = (1 << 3), + dbg_sg = (1 << 4), + dbg_dma = (1 << 5), + dbg_pio = (1 << 6), + dbg_fail = (1 << 7), + dbg_conf = (1 << 8), +}; + +static const int dbgmap_err = dbg_err | dbg_fail; +static const int dbgmap_info = dbg_info | dbg_conf; +static const int dbgmap_debug = dbg_debug; + +#define dbg(host, channels, args...) \ + do { \ + if (dbgmap_err & channels) \ + dev_err(&host->pdev->dev, args); \ + else if (dbgmap_info & channels) \ + dev_info(&host->pdev->dev, args); \ + else if (dbgmap_debug & channels) \ + dev_dbg(&host->pdev->dev, args); \ + } while (0) + +#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1) + +static struct s3c2410_dma_client s3cmci_dma_client = { + .name = "s3c-mci", +}; + +static void finalize_request(struct s3cmci_host *host); +static void s3cmci_send_request(struct mmc_host *mmc); +static void s3cmci_reset(struct s3cmci_host *host); + +#ifdef CONFIG_MMC_DEBUG + +static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) +{ + u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize; + u32 datcon, datcnt, datsta, fsta, imask; + + con = readl(host->base + S3C2410_SDICON); + pre = readl(host->base + S3C2410_SDIPRE); + cmdarg = readl(host->base + S3C2410_SDICMDARG); + cmdcon = readl(host->base + S3C2410_SDICMDCON); + cmdsta = readl(host->base + S3C2410_SDICMDSTAT); + r0 = readl(host->base + S3C2410_SDIRSP0); + r1 = readl(host->base + S3C2410_SDIRSP1); + r2 = readl(host->base + S3C2410_SDIRSP2); + r3 = readl(host->base + S3C2410_SDIRSP3); + timer = readl(host->base + S3C2410_SDITIMER); + bsize = readl(host->base + S3C2410_SDIBSIZE); + datcon = readl(host->base + S3C2410_SDIDCON); + datcnt = readl(host->base + S3C2410_SDIDCNT); + datsta = readl(host->base + S3C2410_SDIDSTA); + fsta = readl(host->base + S3C2410_SDIFSTA); + imask = readl(host->base + host->sdiimsk); + + dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n", + prefix, con, pre, timer); + + dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n", + prefix, cmdcon, cmdarg, cmdsta); + + dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]" + " DSTA:[%08x] DCNT:[%08x]\n", + prefix, datcon, fsta, datsta, datcnt); + + dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]" + " R2:[%08x] R3:[%08x]\n", + prefix, r0, r1, r2, r3); +} + +static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, + int stop) +{ + snprintf(host->dbgmsg_cmd, 300, + "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u", + host->ccnt, (stop ? " (STOP)" : ""), + cmd->opcode, cmd->arg, cmd->flags, cmd->retries); + + if (cmd->data) { + snprintf(host->dbgmsg_dat, 300, + "#%u bsize:%u blocks:%u bytes:%u", + host->dcnt, cmd->data->blksz, + cmd->data->blocks, + cmd->data->blocks * cmd->data->blksz); + } else { + host->dbgmsg_dat[0] = '\0'; + } +} + +static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd, + int fail) +{ + unsigned int dbglvl = fail ? dbg_fail : dbg_debug; + + if (!cmd) + return; + + if (cmd->error == 0) { + dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n", + host->dbgmsg_cmd, cmd->resp[0]); + } else { + dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n", + cmd->error, host->dbgmsg_cmd, host->status); + } + + if (!cmd->data) + return; + + if (cmd->data->error == 0) { + dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat); + } else { + dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n", + cmd->data->error, host->dbgmsg_dat, + readl(host->base + S3C2410_SDIDCNT)); + } +} +#else +static void dbg_dumpcmd(struct s3cmci_host *host, + struct mmc_command *cmd, int fail) { } + +static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, + int stop) { } + +static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { } + +#endif /* CONFIG_MMC_DEBUG */ + +static inline u32 enable_imask(struct s3cmci_host *host, u32 imask) +{ + u32 newmask; + + newmask = readl(host->base + host->sdiimsk); + newmask |= imask; + + writel(newmask, host->base + host->sdiimsk); + + return newmask; +} + +static inline u32 disable_imask(struct s3cmci_host *host, u32 imask) +{ + u32 newmask; + + newmask = readl(host->base + host->sdiimsk); + newmask &= ~imask; + + writel(newmask, host->base + host->sdiimsk); + + return newmask; +} + +static inline void clear_imask(struct s3cmci_host *host) +{ + writel(0, host->base + host->sdiimsk); +} + +static inline int get_data_buffer(struct s3cmci_host *host, + u32 *words, u32 **pointer) +{ + struct scatterlist *sg; + + if (host->pio_active == XFER_NONE) + return -EINVAL; + + if ((!host->mrq) || (!host->mrq->data)) + return -EINVAL; + + if (host->pio_sgptr >= host->mrq->data->sg_len) { + dbg(host, dbg_debug, "no more buffers (%i/%i)\n", + host->pio_sgptr, host->mrq->data->sg_len); + return -EBUSY; + } + sg = &host->mrq->data->sg[host->pio_sgptr]; + + *words = sg->length >> 2; + *pointer = sg_virt(sg); + + host->pio_sgptr++; + + dbg(host, dbg_sg, "new buffer (%i/%i)\n", + host->pio_sgptr, host->mrq->data->sg_len); + + return 0; +} + +static inline u32 fifo_count(struct s3cmci_host *host) +{ + u32 fifostat = readl(host->base + S3C2410_SDIFSTA); + + fifostat &= S3C2410_SDIFSTA_COUNTMASK; + return fifostat >> 2; +} + +static inline u32 fifo_free(struct s3cmci_host *host) +{ + u32 fifostat = readl(host->base + S3C2410_SDIFSTA); + + fifostat &= S3C2410_SDIFSTA_COUNTMASK; + return (63 - fifostat) >> 2; +} + +static void do_pio_read(struct s3cmci_host *host) +{ + int res; + u32 fifo; + void __iomem *from_ptr; + + /* write real prescaler to host, it might be set slow to fix */ + writel(host->prescaler, host->base + S3C2410_SDIPRE); + + from_ptr = host->base + host->sdidata; + + while ((fifo = fifo_count(host))) { + if (!host->pio_words) { + res = get_data_buffer(host, &host->pio_words, + &host->pio_ptr); + if (res) { + host->pio_active = XFER_NONE; + host->complete_what = COMPLETION_FINALIZE; + + dbg(host, dbg_pio, "pio_read(): " + "complete (no more data).\n"); + return; + } + + dbg(host, dbg_pio, + "pio_read(): new target: [%i]@[%p]\n", + host->pio_words, host->pio_ptr); + } + + dbg(host, dbg_pio, + "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n", + fifo, host->pio_words, + readl(host->base + S3C2410_SDIDCNT)); + + if (fifo > host->pio_words) + fifo = host->pio_words; + + host->pio_words -= fifo; + host->pio_count += fifo; + + while (fifo--) + *(host->pio_ptr++) = readl(from_ptr); + } + + if (!host->pio_words) { + res = get_data_buffer(host, &host->pio_words, &host->pio_ptr); + if (res) { + dbg(host, dbg_pio, + "pio_read(): complete (no more buffers).\n"); + host->pio_active = XFER_NONE; + host->complete_what = COMPLETION_FINALIZE; + + return; + } + } + + enable_imask(host, + S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST); +} + +static void do_pio_write(struct s3cmci_host *host) +{ + void __iomem *to_ptr; + int res; + u32 fifo; + + to_ptr = host->base + host->sdidata; + + while ((fifo = fifo_free(host))) { + if (!host->pio_words) { + res = get_data_buffer(host, &host->pio_words, + &host->pio_ptr); + if (res) { + dbg(host, dbg_pio, + "pio_write(): complete (no more data).\n"); + host->pio_active = XFER_NONE; + + return; + } + + dbg(host, dbg_pio, + "pio_write(): new source: [%i]@[%p]\n", + host->pio_words, host->pio_ptr); + + } + + if (fifo > host->pio_words) + fifo = host->pio_words; + + host->pio_words -= fifo; + host->pio_count += fifo; + + while (fifo--) + writel(*(host->pio_ptr++), to_ptr); + } + + enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); +} + +static void pio_tasklet(unsigned long data) +{ + struct s3cmci_host *host = (struct s3cmci_host *) data; + + + if (host->pio_active == XFER_WRITE) + do_pio_write(host); + + if (host->pio_active == XFER_READ) + do_pio_read(host); + + if (host->complete_what == COMPLETION_FINALIZE) { + clear_imask(host); + if (host->pio_active != XFER_NONE) { + dbg(host, dbg_err, "unfinished %s " + "- pio_count:[%u] pio_words:[%u]\n", + (host->pio_active == XFER_READ) ? "read" : "write", + host->pio_count, host->pio_words); + + host->mrq->data->error = -EINVAL; + } + + disable_irq(host->irq); + finalize_request(host); + } +} + +/* + * ISR for SDI Interface IRQ + * Communication between driver and ISR works as follows: + * host->mrq points to current request + * host->complete_what Indicates when the request is considered done + * COMPLETION_CMDSENT when the command was sent + * COMPLETION_RSPFIN when a response was received + * COMPLETION_XFERFINISH when the data transfer is finished + * COMPLETION_XFERFINISH_RSPFIN both of the above. + * host->complete_request is the completion-object the driver waits for + * + * 1) Driver sets up host->mrq and host->complete_what + * 2) Driver prepares the transfer + * 3) Driver enables interrupts + * 4) Driver starts transfer + * 5) Driver waits for host->complete_rquest + * 6) ISR checks for request status (errors and success) + * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error + * 7) ISR completes host->complete_request + * 8) ISR disables interrupts + * 9) Driver wakes up and takes care of the request + * + * Note: "->error"-fields are expected to be set to 0 before the request + * was issued by mmc.c - therefore they are only set, when an error + * contition comes up + */ + +static irqreturn_t s3cmci_irq(int irq, void *dev_id) +{ + struct s3cmci_host *host = dev_id; + struct mmc_command *cmd; + u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk; + u32 mci_cclear, mci_dclear; + unsigned long iflags; + + spin_lock_irqsave(&host->complete_lock, iflags); + + mci_csta = readl(host->base + S3C2410_SDICMDSTAT); + mci_dsta = readl(host->base + S3C2410_SDIDSTA); + mci_dcnt = readl(host->base + S3C2410_SDIDCNT); + mci_fsta = readl(host->base + S3C2410_SDIFSTA); + mci_imsk = readl(host->base + host->sdiimsk); + mci_cclear = 0; + mci_dclear = 0; + + if ((host->complete_what == COMPLETION_NONE) || + (host->complete_what == COMPLETION_FINALIZE)) { + host->status = "nothing to complete"; + clear_imask(host); + goto irq_out; + } + + if (!host->mrq) { + host->status = "no active mrq"; + clear_imask(host); + goto irq_out; + } + + cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd; + + if (!cmd) { + host->status = "no active cmd"; + clear_imask(host); + goto irq_out; + } + + if (!host->dodma) { + if ((host->pio_active == XFER_WRITE) && + (mci_fsta & S3C2410_SDIFSTA_TFDET)) { + + disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); + tasklet_schedule(&host->pio_tasklet); + host->status = "pio tx"; + } + + if ((host->pio_active == XFER_READ) && + (mci_fsta & S3C2410_SDIFSTA_RFDET)) { + + disable_imask(host, + S3C2410_SDIIMSK_RXFIFOHALF | + S3C2410_SDIIMSK_RXFIFOLAST); + + tasklet_schedule(&host->pio_tasklet); + host->status = "pio rx"; + } + } + + if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { + cmd->error = -ETIMEDOUT; + host->status = "error: command timeout"; + goto fail_transfer; + } + + if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) { + if (host->complete_what == COMPLETION_CMDSENT) { + host->status = "ok: command sent"; + goto close_transfer; + } + + mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT; + } + + if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) { + if (cmd->flags & MMC_RSP_CRC) { + cmd->error = -EILSEQ; + host->status = "error: bad command crc"; + goto fail_transfer; + } + + mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL; + } + + if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) { + if (host->complete_what == COMPLETION_RSPFIN) { + host->status = "ok: command response received"; + goto close_transfer; + } + + if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) + host->complete_what = COMPLETION_XFERFINISH; + + mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN; + } + + /* errors handled after this point are only relevant + when a data transfer is in progress */ + + if (!cmd->data) + goto clear_status_bits; + + /* Check for FIFO failure */ + if (host->is2440) { + if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) { + host->mrq->data->error = -EILSEQ; + host->status = "error: 2440 fifo failure"; + goto fail_transfer; + } + } else { + if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) { + cmd->data->error = -EILSEQ; + host->status = "error: fifo failure"; + goto fail_transfer; + } + } + + if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) { + cmd->data->error = -EILSEQ; + host->status = "error: bad data crc (outgoing)"; + goto fail_transfer; + } + + if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) { + cmd->data->error = -EILSEQ; + host->status = "error: bad data crc (incoming)"; + goto fail_transfer; + } + + if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) { + cmd->data->error = -ETIMEDOUT; + host->status = "error: data timeout"; + goto fail_transfer; + } + + if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) { + if (host->complete_what == COMPLETION_XFERFINISH) { + host->status = "ok: data transfer completed"; + goto close_transfer; + } + + if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) + host->complete_what = COMPLETION_RSPFIN; + + mci_dclear |= S3C2410_SDIDSTA_XFERFINISH; + } + +clear_status_bits: + writel(mci_cclear, host->base + S3C2410_SDICMDSTAT); + writel(mci_dclear, host->base + S3C2410_SDIDSTA); + + goto irq_out; + +fail_transfer: + host->pio_active = XFER_NONE; + +close_transfer: + host->complete_what = COMPLETION_FINALIZE; + + clear_imask(host); + tasklet_schedule(&host->pio_tasklet); + + goto irq_out; + +irq_out: + dbg(host, dbg_irq, + "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n", + mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status); + + spin_unlock_irqrestore(&host->complete_lock, iflags); + return IRQ_HANDLED; + +} + +/* + * ISR for the CardDetect Pin +*/ + +static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id) +{ + struct s3cmci_host *host = (struct s3cmci_host *)dev_id; + + dbg(host, dbg_irq, "card detect\n"); + + mmc_detect_change(host->mmc, 500); + + return IRQ_HANDLED; +} + +void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id, + int size, enum s3c2410_dma_buffresult result) +{ + struct s3cmci_host *host = buf_id; + unsigned long iflags; + u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt; + + mci_csta = readl(host->base + S3C2410_SDICMDSTAT); + mci_dsta = readl(host->base + S3C2410_SDIDSTA); + mci_fsta = readl(host->base + S3C2410_SDIFSTA); + mci_dcnt = readl(host->base + S3C2410_SDIDCNT); + + BUG_ON(!host->mrq); + BUG_ON(!host->mrq->data); + BUG_ON(!host->dmatogo); + + spin_lock_irqsave(&host->complete_lock, iflags); + + if (result != S3C2410_RES_OK) { + dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x " + "fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n", + mci_csta, mci_dsta, mci_fsta, + mci_dcnt, result, host->dmatogo); + + goto fail_request; + } + + host->dmatogo--; + if (host->dmatogo) { + dbg(host, dbg_dma, "DMA DONE Size:%i DSTA:[%08x] " + "DCNT:[%08x] toGo:%u\n", + size, mci_dsta, mci_dcnt, host->dmatogo); + + goto out; + } + + dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n", + size, mci_dsta, mci_dcnt); + + host->complete_what = COMPLETION_FINALIZE; + +out: + tasklet_schedule(&host->pio_tasklet); + spin_unlock_irqrestore(&host->complete_lock, iflags); + return; + + +fail_request: + host->mrq->data->error = -EINVAL; + host->complete_what = COMPLETION_FINALIZE; + writel(0, host->base + host->sdiimsk); + goto out; + +} + +static void finalize_request(struct s3cmci_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd; + int debug_as_failure = 0; + + if (host->complete_what != COMPLETION_FINALIZE) + return; + + if (!mrq) + return; + + if (cmd->data && (cmd->error == 0) && + (cmd->data->error == 0)) { + if (host->dodma && (!host->dma_complete)) { + dbg(host, dbg_dma, "DMA Missing!\n"); + return; + } + } + + /* Read response from controller. */ + cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0); + cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1); + cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2); + cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3); + + writel(host->prescaler, host->base + S3C2410_SDIPRE); + + if (cmd->error) + debug_as_failure = 1; + + if (cmd->data && cmd->data->error) + debug_as_failure = 1; + + dbg_dumpcmd(host, cmd, debug_as_failure); + + /* Cleanup controller */ + writel(0, host->base + S3C2410_SDICMDARG); + writel(0, host->base + S3C2410_SDIDCON); + writel(0, host->base + S3C2410_SDICMDCON); + writel(0, host->base + host->sdiimsk); + + if (cmd->data && cmd->error) + cmd->data->error = cmd->error; + + if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) { + host->cmd_is_stop = 1; + s3cmci_send_request(host->mmc); + return; + } + + /* If we have no data transfer we are finished here */ + if (!mrq->data) + goto request_done; + + /* Calulate the amout of bytes transfer if there was no error */ + if (mrq->data->error == 0) { + mrq->data->bytes_xfered = + (mrq->data->blocks * mrq->data->blksz); + } else { + mrq->data->bytes_xfered = 0; + } + + /* If we had an error while transfering data we flush the + * DMA channel and the fifo to clear out any garbage. */ + if (mrq->data->error != 0) { + if (host->dodma) + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); + + if (host->is2440) { + /* Clear failure register and reset fifo. */ + writel(S3C2440_SDIFSTA_FIFORESET | + S3C2440_SDIFSTA_FIFOFAIL, + host->base + S3C2410_SDIFSTA); + } else { + u32 mci_con; + + /* reset fifo */ + mci_con = readl(host->base + S3C2410_SDICON); + mci_con |= S3C2410_SDICON_FIFORESET; + + writel(mci_con, host->base + S3C2410_SDICON); + } + } + +request_done: + host->complete_what = COMPLETION_NONE; + host->mrq = NULL; + mmc_request_done(host->mmc, mrq); +} + + +void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source) +{ + static enum s3c2410_dmasrc last_source = -1; + static int setup_ok; + + if (last_source == source) + return; + + last_source = source; + + s3c2410_dma_devconfig(host->dma, source, 3, + host->mem->start + host->sdidata); + + if (!setup_ok) { + s3c2410_dma_config(host->dma, 4, + (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI)); + s3c2410_dma_set_buffdone_fn(host->dma, + s3cmci_dma_done_callback); + s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); + setup_ok = 1; + } +} + +static void s3cmci_send_command(struct s3cmci_host *host, + struct mmc_command *cmd) +{ + u32 ccon, imsk; + + imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT | + S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT | + S3C2410_SDIIMSK_RESPONSECRC; + + enable_imask(host, imsk); + + if (cmd->data) + host->complete_what = COMPLETION_XFERFINISH_RSPFIN; + else if (cmd->flags & MMC_RSP_PRESENT) + host->complete_what = COMPLETION_RSPFIN; + else + host->complete_what = COMPLETION_CMDSENT; + + writel(cmd->arg, host->base + S3C2410_SDICMDARG); + + ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX; + ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART; + + if (cmd->flags & MMC_RSP_PRESENT) + ccon |= S3C2410_SDICMDCON_WAITRSP; + + if (cmd->flags & MMC_RSP_136) + ccon |= S3C2410_SDICMDCON_LONGRSP; + + writel(ccon, host->base + S3C2410_SDICMDCON); +} + +static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) +{ + u32 dcon, imsk, stoptries = 3; + + /* write DCON register */ + + if (!data) { + writel(0, host->base + S3C2410_SDIDCON); + return 0; + } + + while (readl(host->base + S3C2410_SDIDSTA) & + (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) { + + dbg(host, dbg_err, + "mci_setup_data() transfer stillin progress.\n"); + + writel(0, host->base + S3C2410_SDIDCON); + s3cmci_reset(host); + + if ((stoptries--) == 0) { + dbg_dumpregs(host, "DRF"); + return -EINVAL; + } + } + + dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK; + + if (host->dodma) + dcon |= S3C2410_SDIDCON_DMAEN; + + if (host->bus_width == MMC_BUS_WIDTH_4) + dcon |= S3C2410_SDIDCON_WIDEBUS; + + if (!(data->flags & MMC_DATA_STREAM)) + dcon |= S3C2410_SDIDCON_BLOCKMODE; + + if (data->flags & MMC_DATA_WRITE) { + dcon |= S3C2410_SDIDCON_TXAFTERRESP; + dcon |= S3C2410_SDIDCON_XFER_TXSTART; + } + + if (data->flags & MMC_DATA_READ) { + dcon |= S3C2410_SDIDCON_RXAFTERCMD; + dcon |= S3C2410_SDIDCON_XFER_RXSTART; + } + + if (host->is2440) { + dcon |= S3C2440_SDIDCON_DS_WORD; + dcon |= S3C2440_SDIDCON_DATSTART; + } + + writel(dcon, host->base + S3C2410_SDIDCON); + + /* write BSIZE register */ + + writel(data->blksz, host->base + S3C2410_SDIBSIZE); + + /* add to IMASK register */ + imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC | + S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH; + + enable_imask(host, imsk); + + /* write TIMER register */ + + if (host->is2440) { + writel(0x007FFFFF, host->base + S3C2410_SDITIMER); + } else { + writel(0x0000FFFF, host->base + S3C2410_SDITIMER); + + /* FIX: set slow clock to prevent timeouts on read */ + if (data->flags & MMC_DATA_READ) + writel(0xFF, host->base + S3C2410_SDIPRE); + } + + return 0; +} + +#define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ) + +static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data) +{ + int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; + + BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); + + host->pio_sgptr = 0; + host->pio_words = 0; + host->pio_count = 0; + host->pio_active = rw ? XFER_WRITE : XFER_READ; + + if (rw) { + do_pio_write(host); + enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); + } else { + enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF + | S3C2410_SDIIMSK_RXFIFOLAST); + } + + return 0; +} + +static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) +{ + int dma_len, i; + int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; + + BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); + + s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW); + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); + + dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + (rw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + + if (dma_len == 0) + return -ENOMEM; + + host->dma_complete = 0; + host->dmatogo = dma_len; + + for (i = 0; i < dma_len; i++) { + int res; + + dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i, + sg_dma_address(&data->sg[i]), + sg_dma_len(&data->sg[i])); + + res = s3c2410_dma_enqueue(host->dma, (void *) host, + sg_dma_address(&data->sg[i]), + sg_dma_len(&data->sg[i])); + + if (res) { + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); + return -EBUSY; + } + } + + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START); + + return 0; +} + +static void s3cmci_send_request(struct mmc_host *mmc) +{ + struct s3cmci_host *host = mmc_priv(mmc); + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd; + + host->ccnt++; + prepare_dbgmsg(host, cmd, host->cmd_is_stop); + + /* Clear command, data and fifo status registers + Fifo clear only necessary on 2440, but doesn't hurt on 2410 + */ + writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT); + writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA); + writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA); + + if (cmd->data) { + int res = s3cmci_setup_data(host, cmd->data); + + host->dcnt++; + + if (res) { + cmd->error = -EINVAL; + cmd->data->error = -EINVAL; + + mmc_request_done(mmc, mrq); + return; + } + + if (host->dodma) + res = s3cmci_prepare_dma(host, cmd->data); + else + res = s3cmci_prepare_pio(host, cmd->data); + + if (res) { + cmd->error = res; + cmd->data->error = res; + + mmc_request_done(mmc, mrq); + return; + } + } + + /* Send command */ + s3cmci_send_command(host, cmd); + + /* Enable Interrupt */ + enable_irq(host->irq); +} + +static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct s3cmci_host *host = mmc_priv(mmc); + + host->status = "mmc request"; + host->cmd_is_stop = 0; + host->mrq = mrq; + + s3cmci_send_request(mmc); +} + +static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct s3cmci_host *host = mmc_priv(mmc); + u32 mci_psc, mci_con; + + /* Set the power state */ + + mci_con = readl(host->base + S3C2410_SDICON); + + switch (ios->power_mode) { + case MMC_POWER_ON: + case MMC_POWER_UP: + s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK); + s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD); + s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0); + s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); + s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2); + s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3); + + if (!host->is2440) + mci_con |= S3C2410_SDICON_FIFORESET; + + break; + + case MMC_POWER_OFF: + default: + s3c2410_gpio_setpin(S3C2410_GPE5, 0); + s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP); + + if (host->is2440) + mci_con |= S3C2440_SDICON_SDRESET; + + break; + } + + /* Set clock */ + for (mci_psc = 0; mci_psc < 255; mci_psc++) { + host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1)); + + if (host->real_rate <= ios->clock) + break; + } + + if (mci_psc > 255) + mci_psc = 255; + + host->prescaler = mci_psc; + writel(host->prescaler, host->base + S3C2410_SDIPRE); + + /* If requested clock is 0, real_rate will be 0, too */ + if (ios->clock == 0) + host->real_rate = 0; + + /* Set CLOCK_ENABLE */ + if (ios->clock) + mci_con |= S3C2410_SDICON_CLOCKTYPE; + else + mci_con &= ~S3C2410_SDICON_CLOCKTYPE; + + writel(mci_con, host->base + S3C2410_SDICON); + + if ((ios->power_mode == MMC_POWER_ON) || + (ios->power_mode == MMC_POWER_UP)) { + dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n", + host->real_rate/1000, ios->clock/1000); + } else { + dbg(host, dbg_conf, "powered down.\n"); + } + + host->bus_width = ios->bus_width; +} + +static void s3cmci_reset(struct s3cmci_host *host) +{ + u32 con = readl(host->base + S3C2410_SDICON); + + con |= S3C2440_SDICON_SDRESET; + writel(con, host->base + S3C2410_SDICON); +} + +static struct mmc_host_ops s3cmci_ops = { + .request = s3cmci_request, + .set_ios = s3cmci_set_ios, +}; + +static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) +{ + struct s3cmci_host *host; + struct mmc_host *mmc; + int ret; + + mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto probe_out; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + host->pdev = pdev; + host->is2440 = is2440; + + spin_lock_init(&host->complete_lock); + tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); + + if (is2440) { + host->sdiimsk = S3C2440_SDIIMSK; + host->sdidata = S3C2440_SDIDATA; + host->clk_div = 1; + } else { + host->sdiimsk = S3C2410_SDIIMSK; + host->sdidata = S3C2410_SDIDATA; + host->clk_div = 2; + } + + host->dodma = 0; + host->complete_what = COMPLETION_NONE; + host->pio_active = XFER_NONE; + + host->dma = S3CMCI_DMA; + host->irq_cd = IRQ_EINT2; + + host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!host->mem) { + dev_err(&pdev->dev, + "failed to get io memory region resouce.\n"); + + ret = -ENOENT; + goto probe_free_host; + } + + host->mem = request_mem_region(host->mem->start, + RESSIZE(host->mem), pdev->name); + + if (!host->mem) { + dev_err(&pdev->dev, "failed to request io memory region.\n"); + ret = -ENOENT; + goto probe_free_host; + } + + host->base = ioremap(host->mem->start, RESSIZE(host->mem)); + if (host->base == 0) { + dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); + ret = -EINVAL; + goto probe_free_mem_region; + } + + host->irq = platform_get_irq(pdev, 0); + if (host->irq == 0) { + dev_err(&pdev->dev, "failed to get interrupt resouce.\n"); + ret = -EINVAL; + goto probe_iounmap; + } + + if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) { + dev_err(&pdev->dev, "failed to request mci interrupt.\n"); + ret = -ENOENT; + goto probe_iounmap; + } + + /* We get spurious interrupts even when we have set the IMSK + * register to ignore everything, so use disable_irq() to make + * ensure we don't lock the system with un-serviceable requests. */ + + disable_irq(host->irq); + + s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_EINT2); + set_irq_type(host->irq_cd, IRQT_BOTHEDGE); + + if (request_irq(host->irq_cd, s3cmci_irq_cd, 0, DRIVER_NAME, host)) { + dev_err(&pdev->dev, + "failed to request card detect interrupt.\n"); + ret = -ENOENT; + goto probe_free_irq; + } + + if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL)) { + dev_err(&pdev->dev, "unable to get DMA channel.\n"); + ret = -EBUSY; + goto probe_free_irq_cd; + } + + host->clk = clk_get(&pdev->dev, "sdi"); + if (IS_ERR(host->clk)) { + dev_err(&pdev->dev, "failed to find clock source.\n"); + ret = PTR_ERR(host->clk); + host->clk = NULL; + goto probe_free_host; + } + + ret = clk_enable(host->clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable clock source.\n"); + goto clk_free; + } + + host->clk_rate = clk_get_rate(host->clk); + + mmc->ops = &s3cmci_ops; + mmc->ocr_avail = MMC_VDD_32_33; + mmc->caps = MMC_CAP_4_BIT_DATA; + mmc->f_min = host->clk_rate / (host->clk_div * 256); + mmc->f_max = host->clk_rate / host->clk_div; + + mmc->max_blk_count = 4095; + mmc->max_blk_size = 4095; + mmc->max_req_size = 4095 * 512; + mmc->max_seg_size = mmc->max_req_size; + + mmc->max_phys_segs = 128; + mmc->max_hw_segs = 128; + + dbg(host, dbg_debug, + "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n", + (host->is2440?"2440":""), + host->base, host->irq, host->irq_cd, host->dma); + + ret = mmc_add_host(mmc); + if (ret) { + dev_err(&pdev->dev, "failed to add mmc host.\n"); + goto free_dmabuf; + } + + platform_set_drvdata(pdev, mmc); + dev_info(&pdev->dev, "initialisation done.\n"); + + return 0; + + free_dmabuf: + clk_disable(host->clk); + + clk_free: + clk_put(host->clk); + + probe_free_irq_cd: + free_irq(host->irq_cd, host); + + probe_free_irq: + free_irq(host->irq, host); + + probe_iounmap: + iounmap(host->base); + + probe_free_mem_region: + release_mem_region(host->mem->start, RESSIZE(host->mem)); + + probe_free_host: + mmc_free_host(mmc); + probe_out: + return ret; +} + +static int __devexit s3cmci_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct s3cmci_host *host = mmc_priv(mmc); + + mmc_remove_host(mmc); + + clk_disable(host->clk); + clk_put(host->clk); + + tasklet_disable(&host->pio_tasklet); + + free_irq(host->irq_cd, host); + free_irq(host->irq, host); + + iounmap(host->base); + release_mem_region(host->mem->start, RESSIZE(host->mem)); + + mmc_free_host(mmc); + return 0; +} + +static int __devinit s3cmci_probe_2410(struct platform_device *dev) +{ + return s3cmci_probe(dev, 0); +} + +static int __devinit s3cmci_probe_2412(struct platform_device *dev) +{ + return s3cmci_probe(dev, 1); +} + +static int __devinit s3cmci_probe_2440(struct platform_device *dev) +{ + return s3cmci_probe(dev, 1); +} + +#ifdef CONFIG_PM + +static int s3cmci_suspend(struct platform_device *dev, pm_message_t state) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + + return mmc_suspend_host(mmc, state); +} + +static int s3cmci_resume(struct platform_device *dev) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + + return mmc_resume_host(mmc); +} + +#else /* CONFIG_PM */ +#define s3cmci_suspend NULL +#define s3cmci_resume NULL +#endif /* CONFIG_PM */ + + +static struct platform_driver s3cmci_driver_2410 = { + .driver.name = "s3c2410-sdi", + .driver.owner = THIS_MODULE, + .probe = s3cmci_probe_2410, + .remove = __devexit_p(s3cmci_remove), + .suspend = s3cmci_suspend, + .resume = s3cmci_resume, +}; + +static struct platform_driver s3cmci_driver_2412 = { + .driver.name = "s3c2412-sdi", + .driver.owner = THIS_MODULE, + .probe = s3cmci_probe_2412, + .remove = __devexit_p(s3cmci_remove), + .suspend = s3cmci_suspend, + .resume = s3cmci_resume, +}; + +static struct platform_driver s3cmci_driver_2440 = { + .driver.name = "s3c2440-sdi", + .driver.owner = THIS_MODULE, + .probe = s3cmci_probe_2440, + .remove = __devexit_p(s3cmci_remove), + .suspend = s3cmci_suspend, + .resume = s3cmci_resume, +}; + + +static int __init s3cmci_init(void) +{ + platform_driver_register(&s3cmci_driver_2410); + platform_driver_register(&s3cmci_driver_2412); + platform_driver_register(&s3cmci_driver_2440); + return 0; +} + +static void __exit s3cmci_exit(void) +{ + platform_driver_unregister(&s3cmci_driver_2410); + platform_driver_unregister(&s3cmci_driver_2412); + platform_driver_unregister(&s3cmci_driver_2440); +} + +module_init(s3cmci_init); +module_exit(s3cmci_exit); + +MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Thomas Kleffel "); diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h new file mode 100644 index 000000000000..90b8af7d8a46 --- /dev/null +++ b/drivers/mmc/host/s3cmci.h @@ -0,0 +1,69 @@ +/* + * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver + * + * Copyright (C) 2004-2006 Thomas Kleffel, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* FIXME: DMA Resource management ?! */ +#define S3CMCI_DMA 0 + +enum s3cmci_waitfor { + COMPLETION_NONE, + COMPLETION_FINALIZE, + COMPLETION_CMDSENT, + COMPLETION_RSPFIN, + COMPLETION_XFERFINISH, + COMPLETION_XFERFINISH_RSPFIN, +}; + +struct s3cmci_host { + struct platform_device *pdev; + struct mmc_host *mmc; + struct resource *mem; + struct clk *clk; + void __iomem *base; + int irq; + int irq_cd; + int dma; + + unsigned long clk_rate; + unsigned long clk_div; + unsigned long real_rate; + u8 prescaler; + + int is2440; + unsigned sdiimsk; + unsigned sdidata; + int dodma; + int dmatogo; + + struct mmc_request *mrq; + int cmd_is_stop; + + spinlock_t complete_lock; + enum s3cmci_waitfor complete_what; + + int dma_complete; + + u32 pio_sgptr; + u32 pio_words; + u32 pio_count; + u32 *pio_ptr; +#define XFER_NONE 0 +#define XFER_READ 1 +#define XFER_WRITE 2 + u32 pio_active; + + int bus_width; + + char dbgmsg_cmd[301]; + char dbgmsg_dat[301]; + char *status; + + unsigned int ccnt, dcnt; + struct tasklet_struct pio_tasklet; +}; diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h index bb9d30b72952..bfb222fa4abb 100644 --- a/include/asm-arm/arch-s3c2410/regs-sdi.h +++ b/include/asm-arm/arch-s3c2410/regs-sdi.h @@ -28,9 +28,15 @@ #define S3C2410_SDIDCNT (0x30) #define S3C2410_SDIDSTA (0x34) #define S3C2410_SDIFSTA (0x38) + #define S3C2410_SDIDATA (0x3C) #define S3C2410_SDIIMSK (0x40) +#define S3C2440_SDIDATA (0x40) +#define S3C2440_SDIIMSK (0x3C) + +#define S3C2440_SDICON_SDRESET (1<<8) +#define S3C2440_SDICON_MMCCLOCK (1<<5) #define S3C2410_SDICON_BYTEORDER (1<<4) #define S3C2410_SDICON_SDIOIRQ (1<<3) #define S3C2410_SDICON_RWAITEN (1<<2) @@ -42,7 +48,8 @@ #define S3C2410_SDICMDCON_LONGRSP (1<<10) #define S3C2410_SDICMDCON_WAITRSP (1<<9) #define S3C2410_SDICMDCON_CMDSTART (1<<8) -#define S3C2410_SDICMDCON_INDEX (0xff) +#define S3C2410_SDICMDCON_SENDERHOST (1<<6) +#define S3C2410_SDICMDCON_INDEX (0x3f) #define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) #define S3C2410_SDICMDSTAT_CMDSENT (1<<11) @@ -51,6 +58,9 @@ #define S3C2410_SDICMDSTAT_XFERING (1<<8) #define S3C2410_SDICMDSTAT_INDEX (0xff) +#define S3C2440_SDIDCON_DS_BYTE (0<<22) +#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) +#define S3C2440_SDIDCON_DS_WORD (2<<22) #define S3C2410_SDIDCON_IRQPERIOD (1<<21) #define S3C2410_SDIDCON_TXAFTERRESP (1<<20) #define S3C2410_SDIDCON_RXAFTERCMD (1<<19) @@ -59,6 +69,7 @@ #define S3C2410_SDIDCON_WIDEBUS (1<<16) #define S3C2410_SDIDCON_DMAEN (1<<15) #define S3C2410_SDIDCON_STOP (1<<14) +#define S3C2440_SDIDCON_DATSTART (1<<14) #define S3C2410_SDIDCON_DATMODE (3<<12) #define S3C2410_SDIDCON_BLKNUM (0x7ff) @@ -68,6 +79,7 @@ #define S3C2410_SDIDCON_XFER_RXSTART (2<<12) #define S3C2410_SDIDCON_XFER_TXSTART (3<<12) +#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) #define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) #define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) @@ -82,10 +94,12 @@ #define S3C2410_SDIDSTA_TXDATAON (1<<1) #define S3C2410_SDIDSTA_RXDATAON (1<<0) +#define S3C2440_SDIFSTA_FIFORESET (1<<16) +#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ #define S3C2410_SDIFSTA_TFDET (1<<13) #define S3C2410_SDIFSTA_RFDET (1<<12) -#define S3C2410_SDIFSTA_TXHALF (1<<11) -#define S3C2410_SDIFSTA_TXEMPTY (1<<10) +#define S3C2410_SDIFSTA_TFHALF (1<<11) +#define S3C2410_SDIFSTA_TFEMPTY (1<<10) #define S3C2410_SDIFSTA_RFLAST (1<<9) #define S3C2410_SDIFSTA_RFFULL (1<<8) #define S3C2410_SDIFSTA_RFHALF (1<<7) -- cgit v1.2.3 From 679f0f8abd7187baaff40a47fe4733ae4c24cc9a Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Mon, 30 Jun 2008 22:40:25 +0100 Subject: MMC: S3C24XX MMC/SD driver write fixes This patch is a workaround of some S3C2410 MMC chip bug Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index c6a4d3cadf2b..4db5bd7c0494 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -461,9 +461,19 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) { if (cmd->flags & MMC_RSP_CRC) { - cmd->error = -EILSEQ; - host->status = "error: bad command crc"; - goto fail_transfer; + if (host->mrq->cmd->flags & MMC_RSP_136) { + dbg(host, dbg_irq, + "fixup: ignore CRC fail with long rsp\n"); + } else { + /* note, we used to fail the transfer + * here, but it seems that this is just + * the hardware getting it wrong. + * + * cmd->error = -EILSEQ; + * host->status = "error: bad command crc"; + * goto fail_transfer; + */ + } } mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL; -- cgit v1.2.3 From ceb3ac252519f9ab318050c8ee842e62820d6731 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Mon, 30 Jun 2008 22:40:26 +0100 Subject: MMC: DMA free fix for S3C24XX SD/MMC driver Bugfix to ensure DMA channel allocated is freed on exit. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 4db5bd7c0494..6070f36139bd 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1254,6 +1254,7 @@ static int __devexit s3cmci_remove(struct platform_device *pdev) clk_put(host->clk); tasklet_disable(&host->pio_tasklet); + s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client); free_irq(host->irq_cd, host); free_irq(host->irq, host); -- cgit v1.2.3 From bdbc9c3a8f7a7956611c970e262693faa95081a5 Mon Sep 17 00:00:00 2001 From: Thomas Kleffel Date: Mon, 30 Jun 2008 22:40:27 +0100 Subject: Fix the request finalisation by ensuring the controller is stopped. Signed-off-by: Ben Dooks Signed-off-by: Harald Welte Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 6070f36139bd..8c68b2e0dd6e 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -677,7 +677,7 @@ static void finalize_request(struct s3cmci_host *host) /* Cleanup controller */ writel(0, host->base + S3C2410_SDICMDARG); - writel(0, host->base + S3C2410_SDIDCON); + writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); writel(0, host->base + S3C2410_SDICMDCON); writel(0, host->base + host->sdiimsk); @@ -803,7 +803,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) dbg(host, dbg_err, "mci_setup_data() transfer stillin progress.\n"); - writel(0, host->base + S3C2410_SDIDCON); + writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON); s3cmci_reset(host); if ((stoptries--) == 0) { -- cgit v1.2.3 From d643b5f7e0793ef7828a35a5ea049d675ad2ad8c Mon Sep 17 00:00:00 2001 From: Roman Moracik Date: Mon, 30 Jun 2008 22:40:28 +0100 Subject: MMC: Fix S3C24XX IRQ enable during PIO transfers Fix Bug #677 - I/O errors on heavy microSD writes for 2.6.22.x. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 8c68b2e0dd6e..774af3d7218f 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -335,6 +335,8 @@ static void pio_tasklet(unsigned long data) struct s3cmci_host *host = (struct s3cmci_host *) data; + disable_irq(host->irq); + if (host->pio_active == XFER_WRITE) do_pio_write(host); @@ -352,9 +354,9 @@ static void pio_tasklet(unsigned long data) host->mrq->data->error = -EINVAL; } - disable_irq(host->irq); finalize_request(host); - } + } else + enable_irq(host->irq); } /* @@ -630,7 +632,6 @@ out: spin_unlock_irqrestore(&host->complete_lock, iflags); return; - fail_request: host->mrq->data->error = -EINVAL; host->complete_what = COMPLETION_FINALIZE; -- cgit v1.2.3 From edb5a98e43682d66c98ddd1dee863d867807546e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:29 +0100 Subject: MMC: S3C24XX: Add platform data for MMC/SD driver This patch adds platform data support to the s3mci driver. This allows flexible board-specific configuration of set_power, card detect and read only pins. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 44 +++++++++++++++++++++++++++++++++++--- drivers/mmc/host/s3cmci.h | 1 + include/asm-arm/plat-s3c24xx/mci.h | 12 +++++++++++ 3 files changed, 54 insertions(+), 3 deletions(-) create mode 100644 include/asm-arm/plat-s3c24xx/mci.h diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 774af3d7218f..684a10ca2e8f 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -21,6 +21,8 @@ #include #include +#include + #include "s3cmci.h" #define DRIVER_NAME "s3c-mci" @@ -1011,6 +1013,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2); s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3); + if (host->pdata->set_power) + host->pdata->set_power(ios->power_mode, ios->vdd); + if (!host->is2440) mci_con |= S3C2410_SDICON_FIFORESET; @@ -1024,6 +1029,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->is2440) mci_con |= S3C2440_SDICON_SDRESET; + if (host->pdata->set_power) + host->pdata->set_power(ios->power_mode, ios->vdd); + break; } @@ -1072,9 +1080,25 @@ static void s3cmci_reset(struct s3cmci_host *host) writel(con, host->base + S3C2410_SDICON); } +static int s3cmci_get_ro(struct mmc_host *mmc) +{ + struct s3cmci_host *host = mmc_priv(mmc); + + if (host->pdata->gpio_wprotect == 0) + return 0; + + return s3c2410_gpio_getpin(host->pdata->gpio_wprotect); +} + static struct mmc_host_ops s3cmci_ops = { .request = s3cmci_request, .set_ios = s3cmci_set_ios, + .get_ro = s3cmci_get_ro, +}; + +static struct s3c24xx_mci_pdata s3cmci_def_pdata = { + /* This is currently here to avoid a number of if (host->pdata) + * checks. Any zero fields to ensure reaonable defaults are picked. */ }; static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) @@ -1094,6 +1118,12 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) host->pdev = pdev; host->is2440 = is2440; + host->pdata = pdev->dev.platform_data; + if (!host->pdata) { + pdev->dev.platform_data = &s3cmci_def_pdata; + host->pdata = &s3cmci_def_pdata; + } + spin_lock_init(&host->complete_lock); tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); @@ -1112,7 +1142,8 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) host->pio_active = XFER_NONE; host->dma = S3CMCI_DMA; - host->irq_cd = IRQ_EINT2; + host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect); + s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ); host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!host->mem) { @@ -1158,7 +1189,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) disable_irq(host->irq); - s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_EINT2); + s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ); set_irq_type(host->irq_cd, IRQT_BOTHEDGE); if (request_irq(host->irq_cd, s3cmci_irq_cd, 0, DRIVER_NAME, host)) { @@ -1168,6 +1199,10 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) goto probe_free_irq; } + if (host->pdata->gpio_wprotect) + s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect, + S3C2410_GPIO_INPUT); + if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL)) { dev_err(&pdev->dev, "unable to get DMA channel.\n"); ret = -EBUSY; @@ -1191,11 +1226,14 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) host->clk_rate = clk_get_rate(host->clk); mmc->ops = &s3cmci_ops; - mmc->ocr_avail = MMC_VDD_32_33; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; mmc->caps = MMC_CAP_4_BIT_DATA; mmc->f_min = host->clk_rate / (host->clk_div * 256); mmc->f_max = host->clk_rate / host->clk_div; + if (host->pdata->ocr_avail) + mmc->ocr_avail = host->pdata->ocr_avail; + mmc->max_blk_count = 4095; mmc->max_blk_size = 4095; mmc->max_req_size = 4095 * 512; diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h index 90b8af7d8a46..37d9c60010c9 100644 --- a/drivers/mmc/host/s3cmci.h +++ b/drivers/mmc/host/s3cmci.h @@ -22,6 +22,7 @@ enum s3cmci_waitfor { struct s3cmci_host { struct platform_device *pdev; + struct s3c24xx_mci_pdata *pdata; struct mmc_host *mmc; struct resource *mem; struct clk *clk; diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/include/asm-arm/plat-s3c24xx/mci.h new file mode 100644 index 000000000000..5be2c1449c6d --- /dev/null +++ b/include/asm-arm/plat-s3c24xx/mci.h @@ -0,0 +1,12 @@ +#ifndef _ARCH_MCI_H +#define _ARCH_MCI_H + +struct s3c24xx_mci_pdata { + unsigned int gpio_detect; + unsigned int gpio_wprotect; + unsigned long ocr_avail; + void (*set_power)(unsigned char power_mode, + unsigned short vdd); +}; + +#endif /* _ARCH_NCI_H */ -- cgit v1.2.3 From cf0984c8edf63017fcc2ead212ca057877e345df Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:30 +0100 Subject: MMC: S3C24XX: Add support to invert write protect line Support for inverting the sense of the MMC driver's write protect detection line. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 11 +++++++++-- include/asm-arm/plat-s3c24xx/mci.h | 2 ++ 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 684a10ca2e8f..4fd11d8864eb 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1083,11 +1083,18 @@ static void s3cmci_reset(struct s3cmci_host *host) static int s3cmci_get_ro(struct mmc_host *mmc) { struct s3cmci_host *host = mmc_priv(mmc); + struct s3c24xx_mci_pdata *pdata = host->pdata; + int ret; - if (host->pdata->gpio_wprotect == 0) + if (pdata->gpio_wprotect == 0) return 0; - return s3c2410_gpio_getpin(host->pdata->gpio_wprotect); + ret = s3c2410_gpio_getpin(pdata->gpio_wprotect); + + if (pdata->wprotect_invert) + ret = !ret; + + return ret; } static struct mmc_host_ops s3cmci_ops = { diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/include/asm-arm/plat-s3c24xx/mci.h index 5be2c1449c6d..4f4ccd18f0cb 100644 --- a/include/asm-arm/plat-s3c24xx/mci.h +++ b/include/asm-arm/plat-s3c24xx/mci.h @@ -2,6 +2,8 @@ #define _ARCH_MCI_H struct s3c24xx_mci_pdata { + unsigned int wprotect_invert : 1; + unsigned int gpio_detect; unsigned int gpio_wprotect; unsigned long ocr_avail; -- cgit v1.2.3 From 7c14450ed6ab4ed453b2bf216ca3aaa7a5402af3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:31 +0100 Subject: MMC: S3C24XX: Ensure host->mrq->data is valid Fix a crash if host->mrq->data is NULL on ending a transfer. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 4fd11d8864eb..ffd9269a1874 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -353,7 +353,8 @@ static void pio_tasklet(unsigned long data) (host->pio_active == XFER_READ) ? "read" : "write", host->pio_count, host->pio_words); - host->mrq->data->error = -EINVAL; + if (host->mrq->data) + host->mrq->data->error = -EINVAL; } finalize_request(host); -- cgit v1.2.3 From 55d70f5a7b25800fc8376cdd81d42d6c201fa91d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:32 +0100 Subject: MMC: S3C24XX: Allow card-detect on non-IRQ capable pin Add support to the S3C24XX MMC driver to have the card detect be on a pin that is not IRQ capable. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index ffd9269a1874..aa9a8b44b5ea 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1150,8 +1150,6 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) host->pio_active = XFER_NONE; host->dma = S3CMCI_DMA; - host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect); - s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ); host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!host->mem) { @@ -1197,14 +1195,20 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) disable_irq(host->irq); - s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ); - set_irq_type(host->irq_cd, IRQT_BOTHEDGE); + host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect); - if (request_irq(host->irq_cd, s3cmci_irq_cd, 0, DRIVER_NAME, host)) { - dev_err(&pdev->dev, - "failed to request card detect interrupt.\n"); - ret = -ENOENT; - goto probe_free_irq; + if (host->irq_cd >= 0) { + if (request_irq(host->irq_cd, s3cmci_irq_cd, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + DRIVER_NAME, host)) { + dev_err(&pdev->dev, "can't get card detect irq.\n"); + ret = -ENOENT; + goto probe_free_irq; + } + } else { + dev_warn(&pdev->dev, "host detect has no irq available\n"); + s3c2410_gpio_cfgpin(host->pdata->gpio_detect, + S3C2410_GPIO_INPUT); } if (host->pdata->gpio_wprotect) @@ -1273,7 +1277,8 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) clk_put(host->clk); probe_free_irq_cd: - free_irq(host->irq_cd, host); + if (host->irq_cd >= 0) + free_irq(host->irq_cd, host); probe_free_irq: free_irq(host->irq, host); @@ -1303,7 +1308,8 @@ static int __devexit s3cmci_remove(struct platform_device *pdev) tasklet_disable(&host->pio_tasklet); s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client); - free_irq(host->irq_cd, host); + if (host->irq_cd >= 0) + free_irq(host->irq_cd, host); free_irq(host->irq, host); iounmap(host->base); -- cgit v1.2.3 From 3886ff5f63f33c801ed3af265ac0df20d3a8dcf5 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:33 +0100 Subject: MMC: S3C24XX: Fix s3c2410_dma_request() return code check. The driver should be checking for a negative error code from s3c2410_dma_request(), not non-zero. Newer kernels now return the DMA channel number that was allocated by the request. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index aa9a8b44b5ea..8389107d599e 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1215,7 +1215,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect, S3C2410_GPIO_INPUT); - if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL)) { + if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL) < 0) { dev_err(&pdev->dev, "unable to get DMA channel.\n"); ret = -EBUSY; goto probe_free_irq_cd; -- cgit v1.2.3 From 318f905f02b427b8df33d724b7392a0597b40bdd Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:34 +0100 Subject: MMC: S3C24XX: Add MODULE_ALIAS() entries for the platform devices Add MODULE_ALIAS() declerations for all the supported platform devices for this driver. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 8389107d599e..a6224f9b28bc 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1405,3 +1405,6 @@ module_exit(s3cmci_exit); MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Thomas Kleffel "); +MODULE_ALIAS("platform:s3c2410-sdi"); +MODULE_ALIAS("platform:s3c2412-sdi"); +MODULE_ALIAS("platform:s3c2440-sdi"); -- cgit v1.2.3 From 2de5f79d4dfcb1be16f0b873bc77d6ec74b0426d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:35 +0100 Subject: MMC: S3C24XX: Fix use of msecs where jiffies are needed mmc_detect_change() takes jiffies, not msecs. Convert the previous value of msecs into jiffies before calling. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index a6224f9b28bc..6f1b474e33b9 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -584,7 +584,7 @@ static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id) dbg(host, dbg_irq, "card detect\n"); - mmc_detect_change(host->mmc, 500); + mmc_detect_change(host->mmc, msecs_to_jiffies(500)); return IRQ_HANDLED; } -- cgit v1.2.3 From 50a845700b3b55f825b0eb901b03d6091f66d9f4 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:36 +0100 Subject: MMC: S3C24XX: Add media presence test to request handling. Ensure that we have physical media present before attempting to send a request to a card. This ensures that we do not get flooded by errors from commands that can never be completed timing out. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 19 ++++++++++++++++++- include/asm-arm/plat-s3c24xx/mci.h | 1 + 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 6f1b474e33b9..62d73d3497f0 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -984,6 +984,18 @@ static void s3cmci_send_request(struct mmc_host *mmc) enable_irq(host->irq); } +static int s3cmci_card_present(struct s3cmci_host *host) +{ + struct s3c24xx_mci_pdata *pdata = host->pdata; + int ret; + + if (pdata->gpio_detect == 0) + return -ENOSYS; + + ret = s3c2410_gpio_getpin(pdata->gpio_detect) ? 0 : 1; + return ret ^ pdata->detect_invert; +} + static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct s3cmci_host *host = mmc_priv(mmc); @@ -992,7 +1004,12 @@ static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->cmd_is_stop = 0; host->mrq = mrq; - s3cmci_send_request(mmc); + if (s3cmci_card_present(host) == 0) { + dbg(host, dbg_err, "%s: no medium present\n", __func__); + host->mrq->cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, mrq); + } else + s3cmci_send_request(mmc); } static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/include/asm-arm/plat-s3c24xx/mci.h index 4f4ccd18f0cb..2d0852ac3b27 100644 --- a/include/asm-arm/plat-s3c24xx/mci.h +++ b/include/asm-arm/plat-s3c24xx/mci.h @@ -3,6 +3,7 @@ struct s3c24xx_mci_pdata { unsigned int wprotect_invert : 1; + unsigned int detect_invert : 1; /* set => detect active high. */ unsigned int gpio_detect; unsigned int gpio_wprotect; -- cgit v1.2.3 From ff8c804f1fdecb198c4be57155c61800e0d37bd2 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:37 +0100 Subject: MMC: S3C24XX: Update error debugging. Add better debugging to show where errors are being generated, as some error codes can come from several different code paths. Also fix the error return path from s3cmci_setup_data() to return the error it returned to the request. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 62d73d3497f0..2b4839536975 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -450,6 +450,7 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) } if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { + dbg(host, dbg_err, "CMDSTAT: error CMDTIMEOUT\n"); cmd->error = -ETIMEDOUT; host->status = "error: command timeout"; goto fail_transfer; @@ -505,12 +506,14 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) /* Check for FIFO failure */ if (host->is2440) { if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) { + dbg(host, dbg_err, "FIFO failure\n"); host->mrq->data->error = -EILSEQ; host->status = "error: 2440 fifo failure"; goto fail_transfer; } } else { if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) { + dbg(host, dbg_err, "FIFO failure\n"); cmd->data->error = -EILSEQ; host->status = "error: fifo failure"; goto fail_transfer; @@ -518,18 +521,21 @@ static irqreturn_t s3cmci_irq(int irq, void *dev_id) } if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) { + dbg(host, dbg_err, "bad data crc (outgoing)\n"); cmd->data->error = -EILSEQ; host->status = "error: bad data crc (outgoing)"; goto fail_transfer; } if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) { + dbg(host, dbg_err, "bad data crc (incoming)\n"); cmd->data->error = -EILSEQ; host->status = "error: bad data crc (incoming)"; goto fail_transfer; } if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) { + dbg(host, dbg_err, "data timeout\n"); cmd->data->error = -ETIMEDOUT; host->status = "error: data timeout"; goto fail_transfer; @@ -956,8 +962,9 @@ static void s3cmci_send_request(struct mmc_host *mmc) host->dcnt++; if (res) { - cmd->error = -EINVAL; - cmd->data->error = -EINVAL; + dbg(host, dbg_err, "setup data error %d\n", res); + cmd->error = res; + cmd->data->error = res; mmc_request_done(mmc, mrq); return; @@ -969,6 +976,7 @@ static void s3cmci_send_request(struct mmc_host *mmc) res = s3cmci_prepare_pio(host, cmd->data); if (res) { + dbg(host, dbg_err, "data prepare error %d\n", res); cmd->error = res; cmd->data->error = res; -- cgit v1.2.3 From 4dde7f755211fd58105c989a99a3a9f2f1238fba Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:38 +0100 Subject: MMC: S3C24XX: Add maintainer entry Add Ben Dooks as S3C24XX SD/MMC driver maintainer. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index f140449ba059..9def20aa43b2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3530,6 +3530,13 @@ L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ S: Supported +S3C24XX SD/MMC Driver +P: Ben Dooks +M: ben-linux@fluff.org +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +L: linux-kernel@vger.kernel.org +S: Supported + SAA7146 VIDEO4LINUX-2 DRIVER P: Michael Hunold M: michael@mihu.de -- cgit v1.2.3 From 7e9c7b64022b7faff6022df64baec8ab467d0bfd Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:39 +0100 Subject: MMC: S3C24XX: Refuse incorrectly aligned transfers The hardware does not support any multi-block transfers with an block-size that is not 32bit aligned. Also the driver itself does not support single block non-32bit transfers either. Ensure that the s3cmci_setup_data() returns the appropriate error if we encounter this. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 2b4839536975..6a1e4994b724 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -807,6 +807,17 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) return 0; } + if ((data->blksz & 3) != 0) { + /* We cannot deal with unaligned blocks with more than + * one block being transfered. */ + + if (data->blocks > 1) + return -EINVAL; + + /* No support yet for non-word block transfers. */ + return -EINVAL; + } + while (readl(host->base + S3C2410_SDIDSTA) & (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) { -- cgit v1.2.3 From 9eeebd22ca757fee8dc10ffe6fa6992f33a3c5ec Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 30 Jun 2008 10:50:23 +0300 Subject: mmc: wbsd.c fix shadowing of 'dma' variable This patch fix warning :shadowing dma variable and made use of module_param_named instead of module_param Signed-off-by: Tomas Winkler Acked-by: Marcel Holtmann Signed-off-by: Pierre Ossman --- drivers/mmc/host/wbsd.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index 67e5a9b80f53..c2b61606c430 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -68,16 +68,16 @@ static const int unlock_codes[] = { 0x83, 0x87 }; static const int valid_ids[] = { 0x7112, - }; +}; #ifdef CONFIG_PNP -static unsigned int nopnp = 0; +static unsigned int param_nopnp = 0; #else -static const unsigned int nopnp = 1; +static const unsigned int param_nopnp = 1; #endif -static unsigned int io = 0x248; -static unsigned int irq = 6; -static int dma = 2; +static unsigned int param_io = 0x248; +static unsigned int param_irq = 6; +static int param_dma = 2; /* * Basic functions @@ -1765,7 +1765,7 @@ static void __devexit wbsd_shutdown(struct device *dev, int pnp) static int __devinit wbsd_probe(struct platform_device *dev) { /* Use the module parameters for resources */ - return wbsd_init(&dev->dev, io, irq, dma, 0); + return wbsd_init(&dev->dev, param_io, param_irq, param_dma, 0); } static int __devexit wbsd_remove(struct platform_device *dev) @@ -1979,14 +1979,14 @@ static int __init wbsd_drv_init(void) #ifdef CONFIG_PNP - if (!nopnp) { + if (!param_nopnp) { result = pnp_register_driver(&wbsd_pnp_driver); if (result < 0) return result; } #endif /* CONFIG_PNP */ - if (nopnp) { + if (param_nopnp) { result = platform_driver_register(&wbsd_driver); if (result < 0) return result; @@ -2012,12 +2012,12 @@ static void __exit wbsd_drv_exit(void) { #ifdef CONFIG_PNP - if (!nopnp) + if (!param_nopnp) pnp_unregister_driver(&wbsd_pnp_driver); #endif /* CONFIG_PNP */ - if (nopnp) { + if (param_nopnp) { platform_device_unregister(wbsd_device); platform_driver_unregister(&wbsd_driver); @@ -2029,11 +2029,11 @@ static void __exit wbsd_drv_exit(void) module_init(wbsd_drv_init); module_exit(wbsd_drv_exit); #ifdef CONFIG_PNP -module_param(nopnp, uint, 0444); +module_param_named(nopnp, param_nopnp, uint, 0444); #endif -module_param(io, uint, 0444); -module_param(irq, uint, 0444); -module_param(dma, int, 0444); +module_param_named(io, param_io, uint, 0444); +module_param_named(irq, param_irq, uint, 0444); +module_param_named(dma, param_dma, int, 0444); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Pierre Ossman "); -- cgit v1.2.3 From 6d37333163025b46afbcad434ec9a5f2e88e7254 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Mon, 30 Jun 2008 10:50:24 +0300 Subject: mmc: fix sdio_io sparse errors This patch fixes sdio_io sparse errors. This fix changes signature of API functions, changing unsigned char -> u8 unsigned short -> u16 unsigned long -> u32 - this was probably a bug in 64 bit platforms Signed-off-by: Tomas Winkler Signed-off-by: Pierre Ossman --- drivers/mmc/core/sdio_io.c | 42 ++++++++++++++++-------------------------- include/linux/mmc/sdio_func.h | 15 ++++++--------- 2 files changed, 22 insertions(+), 35 deletions(-) mode change 100644 => 100755 drivers/mmc/core/sdio_io.c mode change 100644 => 100755 include/linux/mmc/sdio_func.h diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c old mode 100644 new mode 100755 index cc42a41ff6ab..3ccf6919877c --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -167,10 +167,8 @@ int sdio_set_block_size(struct sdio_func *func, unsigned blksz) return -EINVAL; if (blksz == 0) { - blksz = min(min( - func->max_blksize, - func->card->host->max_blk_size), - 512u); + blksz = min(func->max_blksize, func->card->host->max_blk_size); + blksz = min(blksz, 512u); } ret = mmc_io_rw_direct(func->card, 1, 0, @@ -311,10 +309,9 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, /* Blocks per command is limited by host count, host transfer * size (we only use a single sg entry) and the maximum for * IO_RW_EXTENDED of 511 blocks. */ - max_blocks = min(min( - func->card->host->max_blk_count, - func->card->host->max_seg_size / func->cur_blksize), - 511u); + max_blocks = min(func->card->host->max_blk_count, + func->card->host->max_seg_size / func->cur_blksize); + max_blocks = min(max_blocks, 511u); while (remainder > func->cur_blksize) { unsigned blocks; @@ -364,11 +361,10 @@ static int sdio_io_rw_ext_helper(struct sdio_func *func, int write, * function. If there is a problem reading the address, 0xff * is returned and @err_ret will contain the error code. */ -unsigned char sdio_readb(struct sdio_func *func, unsigned int addr, - int *err_ret) +u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret) { int ret; - unsigned char val; + u8 val; BUG_ON(!func); @@ -397,8 +393,7 @@ EXPORT_SYMBOL_GPL(sdio_readb); * function. @err_ret will contain the status of the actual * transfer. */ -void sdio_writeb(struct sdio_func *func, unsigned char b, unsigned int addr, - int *err_ret) +void sdio_writeb(struct sdio_func *func, u8 b, unsigned int addr, int *err_ret) { int ret; @@ -459,7 +454,6 @@ int sdio_readsb(struct sdio_func *func, void *dst, unsigned int addr, { return sdio_io_rw_ext_helper(func, 0, addr, 0, dst, count); } - EXPORT_SYMBOL_GPL(sdio_readsb); /** @@ -489,8 +483,7 @@ EXPORT_SYMBOL_GPL(sdio_writesb); * function. If there is a problem reading the address, 0xffff * is returned and @err_ret will contain the error code. */ -unsigned short sdio_readw(struct sdio_func *func, unsigned int addr, - int *err_ret) +u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret) { int ret; @@ -504,7 +497,7 @@ unsigned short sdio_readw(struct sdio_func *func, unsigned int addr, return 0xFFFF; } - return le16_to_cpu(*(u16*)func->tmpbuf); + return le16_to_cpup((__le16 *)func->tmpbuf); } EXPORT_SYMBOL_GPL(sdio_readw); @@ -519,12 +512,11 @@ EXPORT_SYMBOL_GPL(sdio_readw); * function. @err_ret will contain the status of the actual * transfer. */ -void sdio_writew(struct sdio_func *func, unsigned short b, unsigned int addr, - int *err_ret) +void sdio_writew(struct sdio_func *func, u16 b, unsigned int addr, int *err_ret) { int ret; - *(u16*)func->tmpbuf = cpu_to_le16(b); + *(__le16 *)func->tmpbuf = cpu_to_le16(b); ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 2); if (err_ret) @@ -543,8 +535,7 @@ EXPORT_SYMBOL_GPL(sdio_writew); * 0xffffffff is returned and @err_ret will contain the error * code. */ -unsigned long sdio_readl(struct sdio_func *func, unsigned int addr, - int *err_ret) +u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret) { int ret; @@ -558,7 +549,7 @@ unsigned long sdio_readl(struct sdio_func *func, unsigned int addr, return 0xFFFFFFFF; } - return le32_to_cpu(*(u32*)func->tmpbuf); + return le32_to_cpup((__le32 *)func->tmpbuf); } EXPORT_SYMBOL_GPL(sdio_readl); @@ -573,12 +564,11 @@ EXPORT_SYMBOL_GPL(sdio_readl); * function. @err_ret will contain the status of the actual * transfer. */ -void sdio_writel(struct sdio_func *func, unsigned long b, unsigned int addr, - int *err_ret) +void sdio_writel(struct sdio_func *func, u32 b, unsigned int addr, int *err_ret) { int ret; - *(u32*)func->tmpbuf = cpu_to_le32(b); + *(__le32 *)func->tmpbuf = cpu_to_le32(b); ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 4); if (err_ret) diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h old mode 100644 new mode 100755 index f57f22b3be88..28fb0a33acf8 --- a/include/linux/mmc/sdio_func.h +++ b/include/linux/mmc/sdio_func.h @@ -122,23 +122,20 @@ extern int sdio_release_irq(struct sdio_func *func); extern unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz); -extern unsigned char sdio_readb(struct sdio_func *func, - unsigned int addr, int *err_ret); -extern unsigned short sdio_readw(struct sdio_func *func, - unsigned int addr, int *err_ret); -extern unsigned long sdio_readl(struct sdio_func *func, - unsigned int addr, int *err_ret); +extern u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret); +extern u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret); +extern u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret); extern int sdio_memcpy_fromio(struct sdio_func *func, void *dst, unsigned int addr, int count); extern int sdio_readsb(struct sdio_func *func, void *dst, unsigned int addr, int count); -extern void sdio_writeb(struct sdio_func *func, unsigned char b, +extern void sdio_writeb(struct sdio_func *func, u8 b, unsigned int addr, int *err_ret); -extern void sdio_writew(struct sdio_func *func, unsigned short b, +extern void sdio_writew(struct sdio_func *func, u16 b, unsigned int addr, int *err_ret); -extern void sdio_writel(struct sdio_func *func, unsigned long b, +extern void sdio_writel(struct sdio_func *func, u32 b, unsigned int addr, int *err_ret); extern int sdio_memcpy_toio(struct sdio_func *func, unsigned int addr, -- cgit v1.2.3 From 7d2be0749a59096a334c94dc48f43294193cb8ed Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 30 Jun 2008 18:35:03 +0200 Subject: atmel-mci: Driver for Atmel on-chip MMC controllers This is a driver for the MMC controller on the AP7000 chips from Atmel. It should in theory work on AT91 systems too with some tweaking, but since the DMA interface is quite different, it's not entirely clear if it's worth merging this with the at91_mci driver. This driver has been around for a while in BSPs and kernel sources provided by Atmel, but this particular version uses the generic DMA Engine framework (with the slave extensions) instead of an avr32-only DMA controller framework. This driver can also use PIO transfers when no DMA channels are available, and for transfers where using DMA may be difficult or impractical for some reason (e.g. the DMA setup overhead is usually not worth it for very short transfers, and badly aligned buffers or lengths are difficult to handle.) Currently, the driver only support PIO transfers. DMA support has been split out to a separate patch to hopefully make it easier to review. The driver has been tested using mmc-block and ext3fs on several SD, SDHC and MMC+ cards. Reads and writes work fine, with read transfer rates up to 3.5 MiB/s on fast cards with debugging disabled. The driver has also been tested using the mmc_test module on the same cards. All tests except 7, 9, 15 and 17 succeed. The first two are unsupported by all the cards I have, so I don't know if the driver handles this correctly. The last two fail because the hardware flags a Data CRC Error instead of a Data Timeout error. I'm not sure how to deal with that. Documentation for this controller can be found in many data sheets from Atmel, including the AT32AP7000 data sheet which can be found here: http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 Signed-off-by: Haavard Skinnemoen Signed-off-by: Pierre Ossman --- arch/avr32/boards/atngw100/setup.c | 7 + arch/avr32/boards/atstk1000/atstk1002.c | 3 + arch/avr32/mach-at32ap/at32ap700x.c | 30 +- drivers/mmc/host/Kconfig | 10 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/atmel-mci-regs.h | 91 +++ drivers/mmc/host/atmel-mci.c | 981 ++++++++++++++++++++++++++++++++ include/asm-avr32/arch-at32ap/board.h | 6 +- include/asm-avr32/atmel-mci.h | 9 + 9 files changed, 1132 insertions(+), 6 deletions(-) create mode 100644 drivers/mmc/host/atmel-mci-regs.h create mode 100644 drivers/mmc/host/atmel-mci.c create mode 100644 include/asm-avr32/atmel-mci.h diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c index a51bb9fb3c89..c7fe94d03a1e 100644 --- a/arch/avr32/boards/atngw100/setup.c +++ b/arch/avr32/boards/atngw100/setup.c @@ -19,6 +19,7 @@ #include #include +#include #include #include @@ -51,6 +52,11 @@ static struct spi_board_info spi0_board_info[] __initdata = { }, }; +static struct mci_platform_data __initdata mci0_data = { + .detect_pin = GPIO_PIN_PC(25), + .wp_pin = GPIO_PIN_PE(0), +}; + /* * The next two functions should go away as the boot loader is * supposed to initialize the macb address registers with a valid @@ -170,6 +176,7 @@ static int __init atngw100_init(void) set_hw_addr(at32_add_device_eth(1, ð_data[1])); at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); + at32_add_device_mci(0, &mci0_data); at32_add_device_usba(0, NULL); for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) { diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 86b363c1c25b..e11659b732fa 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -234,6 +234,9 @@ static int __init atstk1002_init(void) #ifdef CONFIG_BOARD_ATSTK100X_SPI1 at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif +#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM + at32_add_device_mci(0, NULL); +#endif #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM set_hw_addr(at32_add_device_eth(1, ð_data[1])); #else diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 07b21b121eef..021d51217184 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -14,6 +14,7 @@ #include #include +#include #include #include @@ -1278,20 +1279,32 @@ static struct clk atmel_mci0_pclk = { .index = 9, }; -struct platform_device *__init at32_add_device_mci(unsigned int id) +struct platform_device *__init +at32_add_device_mci(unsigned int id, struct mci_platform_data *data) { - struct platform_device *pdev; + struct mci_platform_data _data; + struct platform_device *pdev; + struct dw_dma_slave *dws; if (id != 0) return NULL; pdev = platform_device_alloc("atmel_mci", id); if (!pdev) - return NULL; + goto fail; if (platform_device_add_resources(pdev, atmel_mci0_resource, ARRAY_SIZE(atmel_mci0_resource))) - goto err_add_resources; + goto fail; + + if (!data) { + data = &_data; + memset(data, 0, sizeof(struct mci_platform_data)); + } + + if (platform_device_add_data(pdev, data, + sizeof(struct mci_platform_data))) + goto fail; select_peripheral(PA(10), PERIPH_A, 0); /* CLK */ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */ @@ -1300,12 +1313,19 @@ struct platform_device *__init at32_add_device_mci(unsigned int id) select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */ + if (data) { + if (data->detect_pin != GPIO_PIN_NONE) + at32_select_gpio(data->detect_pin, 0); + if (data->wp_pin != GPIO_PIN_NONE) + at32_select_gpio(data->wp_pin, 0); + } + atmel_mci0_pclk.dev = &pdev->dev; platform_device_add(pdev); return pdev; -err_add_resources: +fail: platform_device_put(pdev); return NULL; } diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index dc88c03662ab..198df4234354 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -104,6 +104,16 @@ config MMC_AT91 If unsure, say N. +config MMC_ATMELMCI + tristate "Atmel Multimedia Card Interface support" + depends on AVR32 + help + This selects the Atmel Multimedia Card Interface driver. If + you have an AT32 (AVR32) platform with a Multimedia Card + slot, say Y or M here. + + If unsure, say N. + config MMC_IMX tristate "Motorola i.MX Multimedia Card Interface support" depends on ARCH_IMX diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index b3e023bf8c78..2dc9ff23cfb7 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_AT91) += at91_mci.o +obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o obj-$(CONFIG_MMC_S3C) += s3cmci.o diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h new file mode 100644 index 000000000000..a9a5657706c6 --- /dev/null +++ b/drivers/mmc/host/atmel-mci-regs.h @@ -0,0 +1,91 @@ +/* + * Atmel MultiMedia Card Interface driver + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __DRIVERS_MMC_ATMEL_MCI_H__ +#define __DRIVERS_MMC_ATMEL_MCI_H__ + +/* MCI Register Definitions */ +#define MCI_CR 0x0000 /* Control */ +# define MCI_CR_MCIEN ( 1 << 0) /* MCI Enable */ +# define MCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */ +# define MCI_CR_SWRST ( 1 << 7) /* Software Reset */ +#define MCI_MR 0x0004 /* Mode */ +# define MCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */ +# define MCI_MR_RDPROOF ( 1 << 11) /* Read Proof */ +# define MCI_MR_WRPROOF ( 1 << 12) /* Write Proof */ +#define MCI_DTOR 0x0008 /* Data Timeout */ +# define MCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */ +# define MCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */ +#define MCI_SDCR 0x000c /* SD Card / SDIO */ +# define MCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */ +# define MCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */ +# define MCI_SDCBUS_1BIT ( 0 << 7) /* 1-bit data bus */ +# define MCI_SDCBUS_4BIT ( 1 << 7) /* 4-bit data bus */ +#define MCI_ARGR 0x0010 /* Command Argument */ +#define MCI_CMDR 0x0014 /* Command */ +# define MCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */ +# define MCI_CMDR_RSPTYP_NONE ( 0 << 6) /* No response */ +# define MCI_CMDR_RSPTYP_48BIT ( 1 << 6) /* 48-bit response */ +# define MCI_CMDR_RSPTYP_136BIT ( 2 << 6) /* 136-bit response */ +# define MCI_CMDR_SPCMD_INIT ( 1 << 8) /* Initialization command */ +# define MCI_CMDR_SPCMD_SYNC ( 2 << 8) /* Synchronized command */ +# define MCI_CMDR_SPCMD_INT ( 4 << 8) /* Interrupt command */ +# define MCI_CMDR_SPCMD_INTRESP ( 5 << 8) /* Interrupt response */ +# define MCI_CMDR_OPDCMD ( 1 << 11) /* Open Drain */ +# define MCI_CMDR_MAXLAT_5CYC ( 0 << 12) /* Max latency 5 cycles */ +# define MCI_CMDR_MAXLAT_64CYC ( 1 << 12) /* Max latency 64 cycles */ +# define MCI_CMDR_START_XFER ( 1 << 16) /* Start data transfer */ +# define MCI_CMDR_STOP_XFER ( 2 << 16) /* Stop data transfer */ +# define MCI_CMDR_TRDIR_WRITE ( 0 << 18) /* Write data */ +# define MCI_CMDR_TRDIR_READ ( 1 << 18) /* Read data */ +# define MCI_CMDR_BLOCK ( 0 << 19) /* Single-block transfer */ +# define MCI_CMDR_MULTI_BLOCK ( 1 << 19) /* Multi-block transfer */ +# define MCI_CMDR_STREAM ( 2 << 19) /* MMC Stream transfer */ +# define MCI_CMDR_SDIO_BYTE ( 4 << 19) /* SDIO Byte transfer */ +# define MCI_CMDR_SDIO_BLOCK ( 5 << 19) /* SDIO Block transfer */ +# define MCI_CMDR_SDIO_SUSPEND ( 1 << 24) /* SDIO Suspend Command */ +# define MCI_CMDR_SDIO_RESUME ( 2 << 24) /* SDIO Resume Command */ +#define MCI_BLKR 0x0018 /* Block */ +# define MCI_BCNT(x) ((x) << 0) /* Data Block Count */ +# define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */ +#define MCI_RSPR 0x0020 /* Response 0 */ +#define MCI_RSPR1 0x0024 /* Response 1 */ +#define MCI_RSPR2 0x0028 /* Response 2 */ +#define MCI_RSPR3 0x002c /* Response 3 */ +#define MCI_RDR 0x0030 /* Receive Data */ +#define MCI_TDR 0x0034 /* Transmit Data */ +#define MCI_SR 0x0040 /* Status */ +#define MCI_IER 0x0044 /* Interrupt Enable */ +#define MCI_IDR 0x0048 /* Interrupt Disable */ +#define MCI_IMR 0x004c /* Interrupt Mask */ +# define MCI_CMDRDY ( 1 << 0) /* Command Ready */ +# define MCI_RXRDY ( 1 << 1) /* Receiver Ready */ +# define MCI_TXRDY ( 1 << 2) /* Transmitter Ready */ +# define MCI_BLKE ( 1 << 3) /* Data Block Ended */ +# define MCI_DTIP ( 1 << 4) /* Data Transfer In Progress */ +# define MCI_NOTBUSY ( 1 << 5) /* Data Not Busy */ +# define MCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */ +# define MCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */ +# define MCI_RINDE ( 1 << 16) /* Response Index Error */ +# define MCI_RDIRE ( 1 << 17) /* Response Direction Error */ +# define MCI_RCRCE ( 1 << 18) /* Response CRC Error */ +# define MCI_RENDE ( 1 << 19) /* Response End Bit Error */ +# define MCI_RTOE ( 1 << 20) /* Response Time-Out Error */ +# define MCI_DCRCE ( 1 << 21) /* Data CRC Error */ +# define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */ +# define MCI_OVRE ( 1 << 30) /* RX Overrun Error */ +# define MCI_UNRE ( 1 << 31) /* TX Underrun Error */ + +/* Register access macros */ +#define mci_readl(port,reg) \ + __raw_readl((port)->regs + MCI_##reg) +#define mci_writel(port,reg,value) \ + __raw_writel((value), (port)->regs + MCI_##reg) + +#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c new file mode 100644 index 000000000000..25d5324ab7e2 --- /dev/null +++ b/drivers/mmc/host/atmel-mci.c @@ -0,0 +1,981 @@ +/* + * Atmel MultiMedia Card Interface driver + * + * Copyright (C) 2004-2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include +#include + +#include "atmel-mci-regs.h" + +#define ATMCI_DATA_ERROR_FLAGS (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE) + +enum { + EVENT_CMD_COMPLETE = 0, + EVENT_DATA_ERROR, + EVENT_DATA_COMPLETE, + EVENT_STOP_SENT, + EVENT_STOP_COMPLETE, + EVENT_XFER_COMPLETE, +}; + +struct atmel_mci { + struct mmc_host *mmc; + void __iomem *regs; + + struct scatterlist *sg; + unsigned int pio_offset; + + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + + u32 cmd_status; + u32 data_status; + u32 stop_status; + u32 stop_cmdr; + + u32 mode_reg; + u32 sdc_reg; + + struct tasklet_struct tasklet; + unsigned long pending_events; + unsigned long completed_events; + + int present; + int detect_pin; + int wp_pin; + + /* For detect pin debouncing */ + struct timer_list detect_timer; + + unsigned long bus_hz; + unsigned long mapbase; + struct clk *mck; + struct platform_device *pdev; +}; + +#define atmci_is_completed(host, event) \ + test_bit(event, &host->completed_events) +#define atmci_test_and_clear_pending(host, event) \ + test_and_clear_bit(event, &host->pending_events) +#define atmci_test_and_set_completed(host, event) \ + test_and_set_bit(event, &host->completed_events) +#define atmci_set_completed(host, event) \ + set_bit(event, &host->completed_events) +#define atmci_set_pending(host, event) \ + set_bit(event, &host->pending_events) +#define atmci_clear_pending(host, event) \ + clear_bit(event, &host->pending_events) + + +static void atmci_enable(struct atmel_mci *host) +{ + clk_enable(host->mck); + mci_writel(host, CR, MCI_CR_MCIEN); + mci_writel(host, MR, host->mode_reg); + mci_writel(host, SDCR, host->sdc_reg); +} + +static void atmci_disable(struct atmel_mci *host) +{ + mci_writel(host, CR, MCI_CR_SWRST); + + /* Stall until write is complete, then disable the bus clock */ + mci_readl(host, SR); + clk_disable(host->mck); +} + +static inline unsigned int ns_to_clocks(struct atmel_mci *host, + unsigned int ns) +{ + return (ns * (host->bus_hz / 1000000) + 999) / 1000; +} + +static void atmci_set_timeout(struct atmel_mci *host, + struct mmc_data *data) +{ + static unsigned dtomul_to_shift[] = { + 0, 4, 7, 8, 10, 12, 16, 20 + }; + unsigned timeout; + unsigned dtocyc; + unsigned dtomul; + + timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks; + + for (dtomul = 0; dtomul < 8; dtomul++) { + unsigned shift = dtomul_to_shift[dtomul]; + dtocyc = (timeout + (1 << shift) - 1) >> shift; + if (dtocyc < 15) + break; + } + + if (dtomul >= 8) { + dtomul = 7; + dtocyc = 15; + } + + dev_vdbg(&host->mmc->class_dev, "setting timeout to %u cycles\n", + dtocyc << dtomul_to_shift[dtomul]); + mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc))); +} + +/* + * Return mask with command flags to be enabled for this command. + */ +static u32 atmci_prepare_command(struct mmc_host *mmc, + struct mmc_command *cmd) +{ + struct mmc_data *data; + u32 cmdr; + + cmd->error = -EINPROGRESS; + + cmdr = MCI_CMDR_CMDNB(cmd->opcode); + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) + cmdr |= MCI_CMDR_RSPTYP_136BIT; + else + cmdr |= MCI_CMDR_RSPTYP_48BIT; + } + + /* + * This should really be MAXLAT_5 for CMD2 and ACMD41, but + * it's too difficult to determine whether this is an ACMD or + * not. Better make it 64. + */ + cmdr |= MCI_CMDR_MAXLAT_64CYC; + + if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN) + cmdr |= MCI_CMDR_OPDCMD; + + data = cmd->data; + if (data) { + cmdr |= MCI_CMDR_START_XFER; + if (data->flags & MMC_DATA_STREAM) + cmdr |= MCI_CMDR_STREAM; + else if (data->blocks > 1) + cmdr |= MCI_CMDR_MULTI_BLOCK; + else + cmdr |= MCI_CMDR_BLOCK; + + if (data->flags & MMC_DATA_READ) + cmdr |= MCI_CMDR_TRDIR_READ; + } + + return cmdr; +} + +static void atmci_start_command(struct atmel_mci *host, + struct mmc_command *cmd, + u32 cmd_flags) +{ + /* Must read host->cmd after testing event flags */ + smp_rmb(); + WARN_ON(host->cmd); + host->cmd = cmd; + + dev_vdbg(&host->mmc->class_dev, + "start command: ARGR=0x%08x CMDR=0x%08x\n", + cmd->arg, cmd_flags); + + mci_writel(host, ARGR, cmd->arg); + mci_writel(host, CMDR, cmd_flags); +} + +static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data) +{ + struct atmel_mci *host = mmc_priv(mmc); + + atmci_start_command(host, data->stop, host->stop_cmdr); + mci_writel(host, IER, MCI_CMDRDY); +} + +static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct atmel_mci *host = mmc_priv(mmc); + + WARN_ON(host->cmd || host->data); + host->mrq = NULL; + + atmci_disable(host); + + mmc_request_done(mmc, mrq); +} + +/* + * Returns a mask of interrupt flags to be enabled after the whole + * request has been prepared. + */ +static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data) +{ + struct atmel_mci *host = mmc_priv(mmc); + u32 iflags; + + data->error = -EINPROGRESS; + + WARN_ON(host->data); + host->sg = NULL; + host->data = data; + + mci_writel(host, BLKR, MCI_BCNT(data->blocks) + | MCI_BLKLEN(data->blksz)); + dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n", + MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz)); + + iflags = ATMCI_DATA_ERROR_FLAGS; + host->sg = data->sg; + host->pio_offset = 0; + if (data->flags & MMC_DATA_READ) + iflags |= MCI_RXRDY; + else + iflags |= MCI_TXRDY; + + return iflags; +} + +static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct atmel_mci *host = mmc_priv(mmc); + struct mmc_data *data; + struct mmc_command *cmd; + u32 iflags; + u32 cmdflags = 0; + + iflags = mci_readl(host, IMR); + if (iflags) + dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n", + mci_readl(host, IMR)); + + WARN_ON(host->mrq != NULL); + + /* + * We may "know" the card is gone even though there's still an + * electrical connection. If so, we really need to communicate + * this to the MMC core since there won't be any more + * interrupts as the card is completely removed. Otherwise, + * the MMC core might believe the card is still there even + * though the card was just removed very slowly. + */ + if (!host->present) { + mrq->cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, mrq); + return; + } + + host->mrq = mrq; + host->pending_events = 0; + host->completed_events = 0; + + atmci_enable(host); + + /* We don't support multiple blocks of weird lengths. */ + data = mrq->data; + if (data) { + if (data->blocks > 1 && data->blksz & 3) + goto fail; + atmci_set_timeout(host, data); + } + + iflags = MCI_CMDRDY; + cmd = mrq->cmd; + cmdflags = atmci_prepare_command(mmc, cmd); + atmci_start_command(host, cmd, cmdflags); + + if (data) + iflags |= atmci_submit_data(mmc, data); + + if (mrq->stop) { + host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop); + host->stop_cmdr |= MCI_CMDR_STOP_XFER; + if (!(data->flags & MMC_DATA_WRITE)) + host->stop_cmdr |= MCI_CMDR_TRDIR_READ; + if (data->flags & MMC_DATA_STREAM) + host->stop_cmdr |= MCI_CMDR_STREAM; + else + host->stop_cmdr |= MCI_CMDR_MULTI_BLOCK; + } + + /* + * We could have enabled interrupts earlier, but I suspect + * that would open up a nice can of interesting race + * conditions (e.g. command and data complete, but stop not + * prepared yet.) + */ + mci_writel(host, IER, iflags); + + return; + +fail: + atmci_disable(host); + host->mrq = NULL; + mrq->cmd->error = -EINVAL; + mmc_request_done(mmc, mrq); +} + +static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct atmel_mci *host = mmc_priv(mmc); + + if (ios->clock) { + u32 clkdiv; + + /* Set clock rate */ + clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1; + if (clkdiv > 255) { + dev_warn(&mmc->class_dev, + "clock %u too slow; using %lu\n", + ios->clock, host->bus_hz / (2 * 256)); + clkdiv = 255; + } + + host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF + | MCI_MR_RDPROOF; + } + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + host->sdc_reg = 0; + break; + case MMC_BUS_WIDTH_4: + host->sdc_reg = MCI_SDCBUS_4BIT; + break; + } + + switch (ios->power_mode) { + case MMC_POWER_ON: + /* Send init sequence (74 clock cycles) */ + atmci_enable(host); + mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT); + while (!(mci_readl(host, SR) & MCI_CMDRDY)) + cpu_relax(); + atmci_disable(host); + break; + default: + /* + * TODO: None of the currently available AVR32-based + * boards allow MMC power to be turned off. Implement + * power control when this can be tested properly. + */ + break; + } +} + +static int atmci_get_ro(struct mmc_host *mmc) +{ + int read_only = 0; + struct atmel_mci *host = mmc_priv(mmc); + + if (host->wp_pin >= 0) { + read_only = gpio_get_value(host->wp_pin); + dev_dbg(&mmc->class_dev, "card is %s\n", + read_only ? "read-only" : "read-write"); + } else { + dev_dbg(&mmc->class_dev, + "no pin for checking read-only switch." + " Assuming write-enable.\n"); + } + + return read_only; +} + +static struct mmc_host_ops atmci_ops = { + .request = atmci_request, + .set_ios = atmci_set_ios, + .get_ro = atmci_get_ro, +}; + +static void atmci_command_complete(struct atmel_mci *host, + struct mmc_command *cmd, u32 status) +{ + /* Read the response from the card (up to 16 bytes) */ + cmd->resp[0] = mci_readl(host, RSPR); + cmd->resp[1] = mci_readl(host, RSPR); + cmd->resp[2] = mci_readl(host, RSPR); + cmd->resp[3] = mci_readl(host, RSPR); + + if (status & MCI_RTOE) + cmd->error = -ETIMEDOUT; + else if ((cmd->flags & MMC_RSP_CRC) && (status & MCI_RCRCE)) + cmd->error = -EILSEQ; + else if (status & (MCI_RINDE | MCI_RDIRE | MCI_RENDE)) + cmd->error = -EIO; + else + cmd->error = 0; + + if (cmd->error) { + dev_dbg(&host->mmc->class_dev, + "command error: status=0x%08x\n", status); + + if (cmd->data) { + host->data = NULL; + mci_writel(host, IDR, MCI_NOTBUSY + | MCI_TXRDY | MCI_RXRDY + | ATMCI_DATA_ERROR_FLAGS); + } + } +} + +static void atmci_detect_change(unsigned long data) +{ + struct atmel_mci *host = (struct atmel_mci *)data; + struct mmc_request *mrq = host->mrq; + int present; + + /* + * atmci_remove() sets detect_pin to -1 before freeing the + * interrupt. We must not re-enable the interrupt if it has + * been freed. + */ + smp_rmb(); + if (host->detect_pin < 0) + return; + + enable_irq(gpio_to_irq(host->detect_pin)); + present = !gpio_get_value(host->detect_pin); + + dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n", + present, host->present); + + if (present != host->present) { + dev_dbg(&host->mmc->class_dev, "card %s\n", + present ? "inserted" : "removed"); + host->present = present; + + /* Reset controller if card is gone */ + if (!present) { + mci_writel(host, CR, MCI_CR_SWRST); + mci_writel(host, IDR, ~0UL); + mci_writel(host, CR, MCI_CR_MCIEN); + } + + /* Clean up queue if present */ + if (mrq) { + /* + * Reset controller to terminate any ongoing + * commands or data transfers. + */ + mci_writel(host, CR, MCI_CR_SWRST); + + if (!atmci_is_completed(host, EVENT_CMD_COMPLETE)) + mrq->cmd->error = -ENOMEDIUM; + + if (mrq->data && !atmci_is_completed(host, + EVENT_DATA_COMPLETE)) { + host->data = NULL; + mrq->data->error = -ENOMEDIUM; + } + if (mrq->stop && !atmci_is_completed(host, + EVENT_STOP_COMPLETE)) + mrq->stop->error = -ENOMEDIUM; + + host->cmd = NULL; + atmci_request_end(host->mmc, mrq); + } + + mmc_detect_change(host->mmc, 0); + } +} + +static void atmci_tasklet_func(unsigned long priv) +{ + struct mmc_host *mmc = (struct mmc_host *)priv; + struct atmel_mci *host = mmc_priv(mmc); + struct mmc_request *mrq = host->mrq; + struct mmc_data *data = host->data; + + dev_vdbg(&mmc->class_dev, + "tasklet: pending/completed/mask %lx/%lx/%x\n", + host->pending_events, host->completed_events, + mci_readl(host, IMR)); + + if (atmci_test_and_clear_pending(host, EVENT_CMD_COMPLETE)) { + /* + * host->cmd must be set to NULL before the interrupt + * handler sees EVENT_CMD_COMPLETE + */ + host->cmd = NULL; + smp_wmb(); + atmci_set_completed(host, EVENT_CMD_COMPLETE); + atmci_command_complete(host, mrq->cmd, host->cmd_status); + + if (!mrq->cmd->error && mrq->stop + && atmci_is_completed(host, EVENT_XFER_COMPLETE) + && !atmci_test_and_set_completed(host, + EVENT_STOP_SENT)) + send_stop_cmd(host->mmc, mrq->data); + } + if (atmci_test_and_clear_pending(host, EVENT_STOP_COMPLETE)) { + /* + * host->cmd must be set to NULL before the interrupt + * handler sees EVENT_STOP_COMPLETE + */ + host->cmd = NULL; + smp_wmb(); + atmci_set_completed(host, EVENT_STOP_COMPLETE); + atmci_command_complete(host, mrq->stop, host->stop_status); + } + if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) { + u32 status = host->data_status; + + dev_vdbg(&mmc->class_dev, "data error: status=%08x\n", status); + + atmci_set_completed(host, EVENT_DATA_ERROR); + atmci_set_completed(host, EVENT_DATA_COMPLETE); + + if (status & MCI_DTOE) { + dev_dbg(&mmc->class_dev, + "data timeout error\n"); + data->error = -ETIMEDOUT; + } else if (status & MCI_DCRCE) { + dev_dbg(&mmc->class_dev, "data CRC error\n"); + data->error = -EILSEQ; + } else { + dev_dbg(&mmc->class_dev, + "data FIFO error (status=%08x)\n", + status); + data->error = -EIO; + } + + if (host->present && data->stop + && atmci_is_completed(host, EVENT_CMD_COMPLETE) + && !atmci_test_and_set_completed( + host, EVENT_STOP_SENT)) + send_stop_cmd(host->mmc, data); + + host->data = NULL; + } + if (atmci_test_and_clear_pending(host, EVENT_DATA_COMPLETE)) { + atmci_set_completed(host, EVENT_DATA_COMPLETE); + + if (!atmci_is_completed(host, EVENT_DATA_ERROR)) { + data->bytes_xfered = data->blocks * data->blksz; + data->error = 0; + } + + host->data = NULL; + } + + if (host->mrq && !host->cmd && !host->data) + atmci_request_end(mmc, host->mrq); +} + +static void atmci_read_data_pio(struct atmel_mci *host) +{ + struct scatterlist *sg = host->sg; + void *buf = sg_virt(sg); + unsigned int offset = host->pio_offset; + struct mmc_data *data = host->data; + u32 value; + u32 status; + unsigned int nbytes = 0; + + do { + value = mci_readl(host, RDR); + if (likely(offset + 4 <= sg->length)) { + put_unaligned(value, (u32 *)(buf + offset)); + + offset += 4; + nbytes += 4; + + if (offset == sg->length) { + host->sg = sg = sg_next(sg); + if (!sg) + goto done; + + offset = 0; + buf = sg_virt(sg); + } + } else { + unsigned int remaining = sg->length - offset; + memcpy(buf + offset, &value, remaining); + nbytes += remaining; + + flush_dcache_page(sg_page(sg)); + host->sg = sg = sg_next(sg); + if (!sg) + goto done; + + offset = 4 - remaining; + buf = sg_virt(sg); + memcpy(buf, (u8 *)&value + remaining, offset); + nbytes += offset; + } + + status = mci_readl(host, SR); + if (status & ATMCI_DATA_ERROR_FLAGS) { + mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY + | ATMCI_DATA_ERROR_FLAGS)); + host->data_status = status; + atmci_set_pending(host, EVENT_DATA_ERROR); + tasklet_schedule(&host->tasklet); + break; + } + } while (status & MCI_RXRDY); + + host->pio_offset = offset; + data->bytes_xfered += nbytes; + + return; + +done: + mci_writel(host, IDR, MCI_RXRDY); + mci_writel(host, IER, MCI_NOTBUSY); + data->bytes_xfered += nbytes; + atmci_set_completed(host, EVENT_XFER_COMPLETE); + if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE) + && !atmci_test_and_set_completed(host, EVENT_STOP_SENT)) + send_stop_cmd(host->mmc, data); +} + +static void atmci_write_data_pio(struct atmel_mci *host) +{ + struct scatterlist *sg = host->sg; + void *buf = sg_virt(sg); + unsigned int offset = host->pio_offset; + struct mmc_data *data = host->data; + u32 value; + u32 status; + unsigned int nbytes = 0; + + do { + if (likely(offset + 4 <= sg->length)) { + value = get_unaligned((u32 *)(buf + offset)); + mci_writel(host, TDR, value); + + offset += 4; + nbytes += 4; + if (offset == sg->length) { + host->sg = sg = sg_next(sg); + if (!sg) + goto done; + + offset = 0; + buf = sg_virt(sg); + } + } else { + unsigned int remaining = sg->length - offset; + + value = 0; + memcpy(&value, buf + offset, remaining); + nbytes += remaining; + + host->sg = sg = sg_next(sg); + if (!sg) { + mci_writel(host, TDR, value); + goto done; + } + + offset = 4 - remaining; + buf = sg_virt(sg); + memcpy((u8 *)&value + remaining, buf, offset); + mci_writel(host, TDR, value); + nbytes += offset; + } + + status = mci_readl(host, SR); + if (status & ATMCI_DATA_ERROR_FLAGS) { + mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY + | ATMCI_DATA_ERROR_FLAGS)); + host->data_status = status; + atmci_set_pending(host, EVENT_DATA_ERROR); + tasklet_schedule(&host->tasklet); + break; + } + } while (status & MCI_TXRDY); + + host->pio_offset = offset; + data->bytes_xfered += nbytes; + + return; + +done: + mci_writel(host, IDR, MCI_TXRDY); + mci_writel(host, IER, MCI_NOTBUSY); + data->bytes_xfered += nbytes; + atmci_set_completed(host, EVENT_XFER_COMPLETE); + if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE) + && !atmci_test_and_set_completed(host, EVENT_STOP_SENT)) + send_stop_cmd(host->mmc, data); +} + +static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status) +{ + struct atmel_mci *host = mmc_priv(mmc); + + mci_writel(host, IDR, MCI_CMDRDY); + + if (atmci_is_completed(host, EVENT_STOP_SENT)) { + host->stop_status = status; + atmci_set_pending(host, EVENT_STOP_COMPLETE); + } else { + host->cmd_status = status; + atmci_set_pending(host, EVENT_CMD_COMPLETE); + } + + tasklet_schedule(&host->tasklet); +} + +static irqreturn_t atmci_interrupt(int irq, void *dev_id) +{ + struct mmc_host *mmc = dev_id; + struct atmel_mci *host = mmc_priv(mmc); + u32 status, mask, pending; + unsigned int pass_count = 0; + + spin_lock(&mmc->lock); + + do { + status = mci_readl(host, SR); + mask = mci_readl(host, IMR); + pending = status & mask; + if (!pending) + break; + + if (pending & ATMCI_DATA_ERROR_FLAGS) { + mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS + | MCI_RXRDY | MCI_TXRDY); + pending &= mci_readl(host, IMR); + host->data_status = status; + atmci_set_pending(host, EVENT_DATA_ERROR); + tasklet_schedule(&host->tasklet); + } + if (pending & MCI_NOTBUSY) { + mci_writel(host, IDR, (MCI_NOTBUSY + | ATMCI_DATA_ERROR_FLAGS)); + atmci_set_pending(host, EVENT_DATA_COMPLETE); + tasklet_schedule(&host->tasklet); + } + if (pending & MCI_RXRDY) + atmci_read_data_pio(host); + if (pending & MCI_TXRDY) + atmci_write_data_pio(host); + + if (pending & MCI_CMDRDY) + atmci_cmd_interrupt(mmc, status); + } while (pass_count++ < 5); + + spin_unlock(&mmc->lock); + + return pass_count ? IRQ_HANDLED : IRQ_NONE; +} + +static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) +{ + struct mmc_host *mmc = dev_id; + struct atmel_mci *host = mmc_priv(mmc); + + /* + * Disable interrupts until the pin has stabilized and check + * the state then. Use mod_timer() since we may be in the + * middle of the timer routine when this interrupt triggers. + */ + disable_irq_nosync(irq); + mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20)); + + return IRQ_HANDLED; +} + +static int __init atmci_probe(struct platform_device *pdev) +{ + struct mci_platform_data *pdata; + struct atmel_mci *host; + struct mmc_host *mmc; + struct resource *regs; + int irq; + int ret; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return -ENXIO; + pdata = pdev->dev.platform_data; + if (!pdata) + return -ENXIO; + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev); + if (!mmc) + return -ENOMEM; + + host = mmc_priv(mmc); + host->pdev = pdev; + host->mmc = mmc; + host->detect_pin = pdata->detect_pin; + host->wp_pin = pdata->wp_pin; + + host->mck = clk_get(&pdev->dev, "mci_clk"); + if (IS_ERR(host->mck)) { + ret = PTR_ERR(host->mck); + goto err_clk_get; + } + + ret = -ENOMEM; + host->regs = ioremap(regs->start, regs->end - regs->start + 1); + if (!host->regs) + goto err_ioremap; + + clk_enable(host->mck); + mci_writel(host, CR, MCI_CR_SWRST); + host->bus_hz = clk_get_rate(host->mck); + clk_disable(host->mck); + + host->mapbase = regs->start; + + mmc->ops = &atmci_ops; + mmc->f_min = (host->bus_hz + 511) / 512; + mmc->f_max = host->bus_hz / 2; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE; + + mmc->max_hw_segs = 64; + mmc->max_phys_segs = 64; + mmc->max_req_size = 32768 * 512; + mmc->max_blk_size = 32768; + mmc->max_blk_count = 512; + + tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc); + + ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, mmc); + if (ret) + goto err_request_irq; + + /* Assume card is present if we don't have a detect pin */ + host->present = 1; + if (host->detect_pin >= 0) { + if (gpio_request(host->detect_pin, "mmc_detect")) { + dev_dbg(&mmc->class_dev, "no detect pin available\n"); + host->detect_pin = -1; + } else { + host->present = !gpio_get_value(host->detect_pin); + } + } + if (host->wp_pin >= 0) { + if (gpio_request(host->wp_pin, "mmc_wp")) { + dev_dbg(&mmc->class_dev, "no WP pin available\n"); + host->wp_pin = -1; + } + } + + platform_set_drvdata(pdev, host); + + mmc_add_host(mmc); + + if (host->detect_pin >= 0) { + setup_timer(&host->detect_timer, atmci_detect_change, + (unsigned long)host); + + ret = request_irq(gpio_to_irq(host->detect_pin), + atmci_detect_interrupt, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "mmc-detect", mmc); + if (ret) { + dev_dbg(&mmc->class_dev, + "could not request IRQ %d for detect pin\n", + gpio_to_irq(host->detect_pin)); + gpio_free(host->detect_pin); + host->detect_pin = -1; + } + } + + dev_info(&mmc->class_dev, + "Atmel MCI controller at 0x%08lx irq %d\n", + host->mapbase, irq); + + return 0; + +err_request_irq: + iounmap(host->regs); +err_ioremap: + clk_put(host->mck); +err_clk_get: + mmc_free_host(mmc); + return ret; +} + +static int __exit atmci_remove(struct platform_device *pdev) +{ + struct atmel_mci *host = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + + if (host) { + if (host->detect_pin >= 0) { + int pin = host->detect_pin; + + /* Make sure the timer doesn't enable the interrupt */ + host->detect_pin = -1; + smp_wmb(); + + free_irq(gpio_to_irq(pin), host->mmc); + del_timer_sync(&host->detect_timer); + gpio_free(pin); + } + + mmc_remove_host(host->mmc); + + clk_enable(host->mck); + mci_writel(host, IDR, ~0UL); + mci_writel(host, CR, MCI_CR_MCIDIS); + mci_readl(host, SR); + clk_disable(host->mck); + + if (host->wp_pin >= 0) + gpio_free(host->wp_pin); + + free_irq(platform_get_irq(pdev, 0), host->mmc); + iounmap(host->regs); + + clk_put(host->mck); + + mmc_free_host(host->mmc); + } + return 0; +} + +static struct platform_driver atmci_driver = { + .remove = __exit_p(atmci_remove), + .driver = { + .name = "atmel_mci", + }, +}; + +static int __init atmci_init(void) +{ + return platform_driver_probe(&atmci_driver, atmci_probe); +} + +static void __exit atmci_exit(void) +{ + platform_driver_unregister(&atmci_driver); +} + +module_init(atmci_init); +module_exit(atmci_exit); + +MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); +MODULE_AUTHOR("Haavard Skinnemoen "); +MODULE_LICENSE("GPL v2"); diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h index b4cddfaca90e..a3783861cdd2 100644 --- a/include/asm-avr32/arch-at32ap/board.h +++ b/include/asm-avr32/arch-at32ap/board.h @@ -77,7 +77,11 @@ struct i2c_board_info; struct platform_device *at32_add_device_twi(unsigned int id, struct i2c_board_info *b, unsigned int n); -struct platform_device *at32_add_device_mci(unsigned int id); + +struct mci_platform_data; +struct platform_device * +at32_add_device_mci(unsigned int id, struct mci_platform_data *data); + struct platform_device *at32_add_device_ac97c(unsigned int id); struct platform_device *at32_add_device_abdac(unsigned int id); struct platform_device *at32_add_device_psif(unsigned int id); diff --git a/include/asm-avr32/atmel-mci.h b/include/asm-avr32/atmel-mci.h new file mode 100644 index 000000000000..c2ea6e1c9aa1 --- /dev/null +++ b/include/asm-avr32/atmel-mci.h @@ -0,0 +1,9 @@ +#ifndef __ASM_AVR32_ATMEL_MCI_H +#define __ASM_AVR32_ATMEL_MCI_H + +struct mci_platform_data { + int detect_pin; + int wp_pin; +}; + +#endif /* __ASM_AVR32_ATMEL_MCI_H */ -- cgit v1.2.3 From 97067d5581ec831a75a45a52e417bee0f7943dbf Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 6 Jul 2008 00:51:07 +0200 Subject: wbsd: fix bad dma_addr_t conversion DMA addresses are not pointers, so don't treat them as such. Avoids compiler warnings when using 64-bit DMA addresses on a 32-bit system. Signed-off-by: Pierre Ossman --- drivers/mmc/host/wbsd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index c2b61606c430..f7dcd8ec0d7f 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -1420,7 +1420,7 @@ kfree: dma_unmap_single(mmc_dev(host->mmc), host->dma_addr, WBSD_DMA_SIZE, DMA_BIDIRECTIONAL); - host->dma_addr = (dma_addr_t)NULL; + host->dma_addr = 0; kfree(host->dma_buffer); host->dma_buffer = NULL; @@ -1445,7 +1445,7 @@ static void wbsd_release_dma(struct wbsd_host *host) host->dma = -1; host->dma_buffer = NULL; - host->dma_addr = (dma_addr_t)NULL; + host->dma_addr = 0; } /* -- cgit v1.2.3 From 23af60398af2f5033e2f53665538a09f498dbc03 Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Sun, 6 Jul 2008 01:10:27 +0200 Subject: mmc: remove multiwrite capability Relax requirements on host controllers and only require that they do not report a transfer count than is larger than the actual one (i.e. a lower value is okay). This is how many other parts of the kernel behaves so upper layers should already be prepared to handle that scenario. This gives us a performance boost on MMC cards. Signed-off-by: Pierre Ossman --- drivers/mmc/card/block.c | 47 ++++++++++++++++++-------------------------- drivers/mmc/host/at91_mci.c | 2 +- drivers/mmc/host/atmel-mci.c | 2 +- drivers/mmc/host/mmc_spi.c | 5 +---- drivers/mmc/host/mmci.c | 1 - drivers/mmc/host/omap.c | 2 +- drivers/mmc/host/tifm_sd.c | 2 +- drivers/mmc/host/wbsd.c | 2 +- include/linux/mmc/host.h | 11 +++++------ 9 files changed, 30 insertions(+), 44 deletions(-) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 4b0f8220f153..66e5a5487c20 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -237,17 +237,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) if (brq.data.blocks > card->host->max_blk_count) brq.data.blocks = card->host->max_blk_count; - /* - * If the host doesn't support multiple block writes, force - * block writes to single block. SD cards are excepted from - * this rule as they support querying the number of - * successfully written sectors. - */ - if (rq_data_dir(req) != READ && - !(card->host->caps & MMC_CAP_MULTIWRITE) && - !mmc_card_sd(card)) - brq.data.blocks = 1; - if (brq.data.blocks > 1) { /* SPI multiblock writes terminate using a special * token, not a STOP_TRANSMISSION request. @@ -367,30 +356,32 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) * mark the known good sectors as ok. * * If the card is not SD, we can still ok written sectors - * if the controller can do proper error reporting. + * as reported by the controller (which might be less than + * the real number of written sectors, but never more). * * For reads we just fail the entire chunk as that should * be safe in all cases. */ - if (rq_data_dir(req) != READ && mmc_card_sd(card)) { - u32 blocks; - unsigned int bytes; - - blocks = mmc_sd_num_wr_blocks(card); - if (blocks != (u32)-1) { - if (card->csd.write_partial) - bytes = blocks << md->block_bits; - else - bytes = blocks << 9; + if (rq_data_dir(req) != READ) { + if (mmc_card_sd(card)) { + u32 blocks; + unsigned int bytes; + + blocks = mmc_sd_num_wr_blocks(card); + if (blocks != (u32)-1) { + if (card->csd.write_partial) + bytes = blocks << md->block_bits; + else + bytes = blocks << 9; + spin_lock_irq(&md->lock); + ret = __blk_end_request(req, 0, bytes); + spin_unlock_irq(&md->lock); + } + } else { spin_lock_irq(&md->lock); - ret = __blk_end_request(req, 0, bytes); + ret = __blk_end_request(req, 0, brq.data.bytes_xfered); spin_unlock_irq(&md->lock); } - } else if (rq_data_dir(req) != READ && - (card->host->caps & MMC_CAP_MULTIWRITE)) { - spin_lock_irq(&md->lock); - ret = __blk_end_request(req, 0, brq.data.bytes_xfered); - spin_unlock_irq(&md->lock); } mmc_release_host(card->host); diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index 16df235fcc2e..f15e2064305c 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -995,7 +995,7 @@ static int __init at91_mci_probe(struct platform_device *pdev) mmc->f_min = 375000; mmc->f_max = 25000000; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps = MMC_CAP_MULTIWRITE | MMC_CAP_SDIO_IRQ; + mmc->caps = MMC_CAP_SDIO_IRQ; mmc->max_blk_size = 4095; mmc->max_blk_count = mmc->max_req_size; diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 25d5324ab7e2..cce873c5a149 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -849,7 +849,7 @@ static int __init atmci_probe(struct platform_device *pdev) mmc->f_min = (host->bus_hz + 511) / 512; mmc->f_max = host->bus_hz / 2; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE; + mmc->caps |= MMC_CAP_4_BIT_DATA; mmc->max_hw_segs = 64; mmc->max_phys_segs = 64; diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 4e82f64a96bc..41cc63360e43 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1252,10 +1252,7 @@ static int mmc_spi_probe(struct spi_device *spi) mmc->ops = &mmc_spi_ops; mmc->max_blk_size = MMC_SPI_BLOCKSIZE; - /* As long as we keep track of the number of successfully - * transmitted blocks, we're good for multiwrite. - */ - mmc->caps = MMC_CAP_SPI | MMC_CAP_MULTIWRITE; + mmc->caps = MMC_CAP_SPI; /* SPI doesn't need the lowspeed device identification thing for * MMC or SD cards, since it never comes up in open drain mode. diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index da5fecad74d9..696cf3647ceb 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -535,7 +535,6 @@ static int mmci_probe(struct amba_device *dev, void *id) mmc->f_min = (host->mclk + 511) / 512; mmc->f_max = min(host->mclk, fmax); mmc->ocr_avail = plat->ocr_mask; - mmc->caps = MMC_CAP_MULTIWRITE; /* * We can do SGIO diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 549517c35675..dbc26eb6a89e 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1317,7 +1317,7 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id) host->slots[id] = slot; - mmc->caps = MMC_CAP_MULTIWRITE; + mmc->caps = 0; if (host->pdata->conf.wire4) mmc->caps |= MMC_CAP_4_BIT_DATA; diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c index 1c14a186f000..13844843e8de 100644 --- a/drivers/mmc/host/tifm_sd.c +++ b/drivers/mmc/host/tifm_sd.c @@ -973,7 +973,7 @@ static int tifm_sd_probe(struct tifm_dev *sock) mmc->ops = &tifm_sd_ops; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE; + mmc->caps = MMC_CAP_4_BIT_DATA; mmc->f_min = 20000000 / 60; mmc->f_max = 24000000; diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index f7dcd8ec0d7f..adda37952032 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -1219,7 +1219,7 @@ static int __devinit wbsd_alloc_mmc(struct device *dev) mmc->f_min = 375000; mmc->f_max = 24000000; mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE; + mmc->caps = MMC_CAP_4_BIT_DATA; spin_lock_init(&host->lock); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 753b7231b887..10a2080086ca 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -111,12 +111,11 @@ struct mmc_host { unsigned long caps; /* Host capabilities */ #define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */ -#define MMC_CAP_MULTIWRITE (1 << 1) /* Can accurately report bytes sent to card on error */ -#define MMC_CAP_MMC_HIGHSPEED (1 << 2) /* Can do MMC high-speed timing */ -#define MMC_CAP_SD_HIGHSPEED (1 << 3) /* Can do SD high-speed timing */ -#define MMC_CAP_SDIO_IRQ (1 << 4) /* Can signal pending SDIO IRQs */ -#define MMC_CAP_SPI (1 << 5) /* Talks only SPI protocols */ -#define MMC_CAP_NEEDS_POLL (1 << 6) /* Needs polling for card-detection */ +#define MMC_CAP_MMC_HIGHSPEED (1 << 1) /* Can do MMC high-speed timing */ +#define MMC_CAP_SD_HIGHSPEED (1 << 2) /* Can do SD high-speed timing */ +#define MMC_CAP_SDIO_IRQ (1 << 3) /* Can signal pending SDIO IRQs */ +#define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */ +#define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */ /* host specific block data */ unsigned int max_seg_size; /* see blk_queue_max_segment_size */ -- cgit v1.2.3 From c8b3e02eb250ceb661437e9b198757eff0eb6fd2 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sat, 5 Jul 2008 19:52:04 +0300 Subject: mmc: fix spares errors of sdhci.c 1. sdhci_prepare_data: fix shadowing of count variable u8 count int count -> sg_cnt; 2. sdhci_add_host: assignment of integer to pointer dma_mask = 0 -> dma_mask = NULL; Signed-off-by: Tomas Winkler Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index d3e4a391e351..13bd681eda29 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -672,14 +672,14 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) host->ioaddr + SDHCI_ADMA_ADDRESS); } } else { - int count; + int sg_cnt; - count = dma_map_sg(mmc_dev(host->mmc), + sg_cnt = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, (data->flags & MMC_DATA_READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE); - if (count == 0) { + if (sg_cnt == 0) { /* * This only happens when someone fed * us an invalid request. @@ -1583,7 +1583,7 @@ int sdhci_add_host(struct sdhci_host *host) /* XXX: Hack to get MMC layer to avoid highmem */ if (!(host->flags & SDHCI_USE_DMA)) - mmc_dev(host->mmc)->dma_mask = 0; + mmc_dev(host->mmc)->dma_mask = NULL; host->max_clk = (caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; -- cgit v1.2.3 From c71f65129a1fb67bc6b9b8d03b493675b5c9302b Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Mon, 7 Jul 2008 17:25:56 -0400 Subject: mmc: OLPC: update vdd/powerup quirk comment This comment update got lost in the great floo^Wmerge. As Pierre pointed out, no one knows what 'CaFe' is. Signed-off-by: Andres Salomon Signed-off-by: Pierre Ossman --- drivers/mmc/host/sdhci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 13bd681eda29..17701c3da733 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -978,7 +978,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) } /* - * At least the CaFe chip gets confused if we set the voltage + * At least the Marvell CaFe chip gets confused if we set the voltage * and set turn on power at the same time, so set the voltage first. */ if ((host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)) -- cgit v1.2.3 From aba3728ce2e8ce85e1e5f6b275131e9332256789 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 15 Jul 2008 14:48:48 +0200 Subject: x86: sanitize Kconfig Set default n for MEMTEST and MTRR_SANITIZER and fix the help texts. Signed-off-by: Thomas Gleixner --- arch/x86/Kconfig | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 6958d6bcaf70..2642b4bf41b9 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -447,7 +447,6 @@ config PARAVIRT_DEBUG config MEMTEST bool "Memtest" depends on X86_64 - default y help This option adds a kernel parameter 'memtest', which allows memtest to be set. @@ -455,7 +454,7 @@ config MEMTEST memtest=1, mean do 1 test pattern; ... memtest=4, mean do 4 test patterns. - If you are unsure how to answer this question, answer Y. + If you are unsure how to answer this question, answer N. config X86_SUMMIT_NUMA def_bool y @@ -1135,21 +1134,18 @@ config MTRR See for more information. config MTRR_SANITIZER - def_bool y + bool prompt "MTRR cleanup support" depends on MTRR help - Convert MTRR layout from continuous to discrete, so some X driver - could add WB entries. + Convert MTRR layout from continuous to discrete, so X drivers can + add writeback entries. - Say N here if you see bootup problems (boot crash, boot hang, - spontaneous reboots). + Can be disabled with disable_mtrr_cleanup on the kernel command line. + The largest mtrr entry size for a continous block can be set with + mtrr_chunk_size. - Could be disabled with disable_mtrr_cleanup. Also mtrr_chunk_size - could be used to send largest mtrr entry size for continuous block - to hold holes (aka. UC entries) - - If unsure, say Y. + If unsure, say N. config MTRR_SANITIZER_ENABLE_DEFAULT int "MTRR cleanup enable value (0-1)" @@ -1166,7 +1162,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT depends on MTRR_SANITIZER help mtrr cleanup spare entries default, it can be changed via - mtrr_spare_reg_nr= + mtrr_spare_reg_nr=N on the kernel command line. config X86_PAT bool -- cgit v1.2.3 From d3af01f18bf18e9b2a95711894fc239daeab5e2e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 15 Jul 2008 15:04:56 +0200 Subject: Documentation: document debugpat commandline option Signed-off-by: Thomas Gleixner --- Documentation/kernel-parameters.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b3a5aad7e629..681d6152e003 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -571,6 +571,8 @@ and is between 256 and 4096 characters. It is defined in the file debug_objects [KNL] Enable object debugging + debugpat [X86] Enable PAT debugging + decnet.addr= [HW,NET] Format: [,] See also Documentation/networking/decnet.txt. -- cgit v1.2.3 From 3f1c38723eb467d34d704d0ee6e7b796ba4981ee Mon Sep 17 00:00:00 2001 From: Kevin Winchester Date: Mon, 14 Jul 2008 21:36:13 -0300 Subject: x86: Fix compile error with CONFIG_AS_CFI=n AS arch/x86/lib/csum-copy_64.o arch/x86/lib/csum-copy_64.S: Assembler messages: arch/x86/lib/csum-copy_64.S:48: Error: Macro `ignore' was already defined make[1]: *** [arch/x86/lib/csum-copy_64.o] Error 1 make: *** [arch/x86/lib] Error 2 It appears that csum-copy_64.S and dwarf2.h both define an ignore macro. I would expect one of them can be renamed quite easily, unless they are references elsewhere. Caused-by-commit: 392a0fc96bd059b38564f5f8fb58327460cb5a9d x86: merge dwarf2 headers Signed-off-by: Thomas Gleixner --- include/asm-x86/dwarf2.h | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/include/asm-x86/dwarf2.h b/include/asm-x86/dwarf2.h index 0bfe250894f7..738bb9fb3e53 100644 --- a/include/asm-x86/dwarf2.h +++ b/include/asm-x86/dwarf2.h @@ -38,23 +38,23 @@ /* Due to the structure of pre-exisiting code, don't use assembler line comment character # to ignore the arguments. Instead, use a dummy macro. */ -.macro ignore a=0, b=0, c=0, d=0 +.macro cfi_ignore a=0, b=0, c=0, d=0 .endm -#define CFI_STARTPROC ignore -#define CFI_ENDPROC ignore -#define CFI_DEF_CFA ignore -#define CFI_DEF_CFA_REGISTER ignore -#define CFI_DEF_CFA_OFFSET ignore -#define CFI_ADJUST_CFA_OFFSET ignore -#define CFI_OFFSET ignore -#define CFI_REL_OFFSET ignore -#define CFI_REGISTER ignore -#define CFI_RESTORE ignore -#define CFI_REMEMBER_STATE ignore -#define CFI_RESTORE_STATE ignore -#define CFI_UNDEFINED ignore -#define CFI_SIGNAL_FRAME ignore +#define CFI_STARTPROC cfi_ignore +#define CFI_ENDPROC cfi_ignore +#define CFI_DEF_CFA cfi_ignore +#define CFI_DEF_CFA_REGISTER cfi_ignore +#define CFI_DEF_CFA_OFFSET cfi_ignore +#define CFI_ADJUST_CFA_OFFSET cfi_ignore +#define CFI_OFFSET cfi_ignore +#define CFI_REL_OFFSET cfi_ignore +#define CFI_REGISTER cfi_ignore +#define CFI_RESTORE cfi_ignore +#define CFI_REMEMBER_STATE cfi_ignore +#define CFI_RESTORE_STATE cfi_ignore +#define CFI_UNDEFINED cfi_ignore +#define CFI_SIGNAL_FRAME cfi_ignore #endif -- cgit v1.2.3 From 62a7573ee9f31d4fdb330b3e68ebf6efaba1d57c Mon Sep 17 00:00:00 2001 From: Benzi Zbit Date: Thu, 10 Jul 2008 02:41:43 +0300 Subject: sdio: fix the use of hard coded timeout value. This adds reading and using of enable_timeout from the CIS Signed-off-by: Benzi Zbit Signed-off-by: Tomas Winkler Signed-off-by: Pierre Ossman --- drivers/mmc/core/sdio_cis.c | 6 ++++++ drivers/mmc/core/sdio_io.c | 6 +----- include/linux/mmc/sdio_func.h | 2 ++ 3 files changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c index d5e51b1c7b3f..956bd7677502 100644 --- a/drivers/mmc/core/sdio_cis.c +++ b/drivers/mmc/core/sdio_cis.c @@ -129,6 +129,12 @@ static int cistpl_funce_func(struct sdio_func *func, /* TPLFE_MAX_BLK_SIZE */ func->max_blksize = buf[12] | (buf[13] << 8); + /* TPLFE_ENABLE_TIMEOUT_VAL, present in ver 1.1 and above */ + if (vsn > SDIO_SDIO_REV_1_00) + func->enable_timeout = (buf[28] | (buf[29] << 8)) * 10; + else + func->enable_timeout = jiffies_to_msecs(HZ); + return 0; } diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index 3ccf6919877c..0888df64581f 100755 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -76,11 +76,7 @@ int sdio_enable_func(struct sdio_func *func) if (ret) goto err; - /* - * FIXME: This should timeout based on information in the CIS, - * but we don't have card to parse that yet. - */ - timeout = jiffies + HZ; + timeout = jiffies + msecs_to_jiffies(func->enable_timeout); while (1) { ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IORx, 0, ®); diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h index 28fb0a33acf8..07bee4a0d457 100755 --- a/include/linux/mmc/sdio_func.h +++ b/include/linux/mmc/sdio_func.h @@ -46,6 +46,8 @@ struct sdio_func { unsigned max_blksize; /* maximum block size */ unsigned cur_blksize; /* current block size */ + unsigned enable_timeout; /* max enable timeout in msec */ + unsigned int state; /* function state */ #define SDIO_STATE_PRESENT (1<<0) /* present in sysfs */ -- cgit v1.2.3 From ea901300cd8b809285fa5cbced18124f127e0ac6 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 10 Jul 2008 03:01:56 +0300 Subject: sdio: sdio_io.c Fix sparse warnings Unfold nested macros it creates not readable code and sparse warnings sdio_io.c:190:9: warning: symbol '_min1' shadows an earlier one Signed-off-by: Tomas Winkler Signed-off-by: Pierre Ossman --- drivers/mmc/core/sdio_io.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index 0888df64581f..f61fc2d4cd0a 100755 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -187,11 +187,10 @@ EXPORT_SYMBOL_GPL(sdio_set_block_size); */ static inline unsigned int sdio_max_byte_size(struct sdio_func *func) { - return min(min(min( - func->card->host->max_seg_size, - func->card->host->max_blk_size), - func->max_blksize), - 512u); /* maximum size for byte mode */ + unsigned mval = min(func->card->host->max_seg_size, + func->card->host->max_blk_size); + mval = min(mval, func->max_blksize); + return min(mval, 512u); /* maximum size for byte mode */ } /** -- cgit v1.2.3 From 6a36913a33cf3d366e124f25c486a71212d02bce Mon Sep 17 00:00:00 2001 From: Sascha Sommer Date: Tue, 15 Jul 2008 14:21:29 +0200 Subject: mmc: host driver for Ricoh Bay1Controllers Signed-off-by: Sascha Sommer Signed-off-by: Pierre Ossman --- MAINTAINERS | 6 + drivers/mmc/host/Kconfig | 10 + drivers/mmc/host/Makefile | 2 + drivers/mmc/host/sdricoh_cs.c | 575 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 593 insertions(+) create mode 100644 drivers/mmc/host/sdricoh_cs.c diff --git a/MAINTAINERS b/MAINTAINERS index 9def20aa43b2..c16b986d7e0a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3609,6 +3609,12 @@ P: Jim Cromie M: jim.cromie@gmail.com S: Maintained +SDRICOH_CS MMC/SD HOST CONTROLLER INTERFACE DRIVER +P: Sascha Sommer +M: saschasommer@freenet.de +L: sdricohcs-devel@lists.sourceforge.net (subscribers-only) +S: Maintained + SECURITY CONTACT P: Security Officers M: security@kernel.org diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 198df4234354..dc6f2579f85c 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -164,3 +164,13 @@ config MMC_S3C If unsure, say N. +config MMC_SDRICOH_CS + tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)" + depends on EXPERIMENTAL && MMC && PCI && PCMCIA + help + Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA + card whenever you insert a MMC or SD card into the card slot. + + To compile this driver as a module, choose M here: the + module will be called sdricoh_cs. + diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 2dc9ff23cfb7..db52eebfb50e 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -20,3 +20,5 @@ obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o obj-$(CONFIG_MMC_S3C) += s3cmci.o +obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o + diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c new file mode 100644 index 000000000000..f99e9f721629 --- /dev/null +++ b/drivers/mmc/host/sdricoh_cs.c @@ -0,0 +1,575 @@ +/* + * sdricoh_cs.c - driver for Ricoh Secure Digital Card Readers that can be + * found on some Ricoh RL5c476 II cardbus bridge + * + * Copyright (C) 2006 - 2008 Sascha Sommer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* +#define DEBUG +#define VERBOSE_DEBUG +*/ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include + +#define DRIVER_NAME "sdricoh_cs" + +static unsigned int switchlocked; + +/* i/o region */ +#define SDRICOH_PCI_REGION 0 +#define SDRICOH_PCI_REGION_SIZE 0x1000 + +/* registers */ +#define R104_VERSION 0x104 +#define R200_CMD 0x200 +#define R204_CMD_ARG 0x204 +#define R208_DATAIO 0x208 +#define R20C_RESP 0x20c +#define R21C_STATUS 0x21c +#define R2E0_INIT 0x2e0 +#define R2E4_STATUS_RESP 0x2e4 +#define R2F0_RESET 0x2f0 +#define R224_MODE 0x224 +#define R226_BLOCKSIZE 0x226 +#define R228_POWER 0x228 +#define R230_DATA 0x230 + +/* flags for the R21C_STATUS register */ +#define STATUS_CMD_FINISHED 0x00000001 +#define STATUS_TRANSFER_FINISHED 0x00000004 +#define STATUS_CARD_INSERTED 0x00000020 +#define STATUS_CARD_LOCKED 0x00000080 +#define STATUS_CMD_TIMEOUT 0x00400000 +#define STATUS_READY_TO_READ 0x01000000 +#define STATUS_READY_TO_WRITE 0x02000000 +#define STATUS_BUSY 0x40000000 + +/* timeouts */ +#define INIT_TIMEOUT 100 +#define CMD_TIMEOUT 100000 +#define TRANSFER_TIMEOUT 100000 +#define BUSY_TIMEOUT 32767 + +/* list of supported pcmcia devices */ +static struct pcmcia_device_id pcmcia_ids[] = { + /* vendor and device strings followed by their crc32 hashes */ + PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay1Controller", 0xd9f522ed, + 0xc3901202), + PCMCIA_DEVICE_NULL, +}; + +MODULE_DEVICE_TABLE(pcmcia, pcmcia_ids); + +/* mmc privdata */ +struct sdricoh_host { + struct device *dev; + struct mmc_host *mmc; /* MMC structure */ + unsigned char __iomem *iobase; + struct pci_dev *pci_dev; + int app_cmd; +}; + +/***************** register i/o helper functions *****************************/ + +static inline unsigned int sdricoh_readl(struct sdricoh_host *host, + unsigned int reg) +{ + unsigned int value = readl(host->iobase + reg); + dev_vdbg(host->dev, "rl %x 0x%x\n", reg, value); + return value; +} + +static inline void sdricoh_writel(struct sdricoh_host *host, unsigned int reg, + unsigned int value) +{ + writel(value, host->iobase + reg); + dev_vdbg(host->dev, "wl %x 0x%x\n", reg, value); + +} + +static inline unsigned int sdricoh_readw(struct sdricoh_host *host, + unsigned int reg) +{ + unsigned int value = readw(host->iobase + reg); + dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value); + return value; +} + +static inline void sdricoh_writew(struct sdricoh_host *host, unsigned int reg, + unsigned short value) +{ + writew(value, host->iobase + reg); + dev_vdbg(host->dev, "ww %x 0x%x\n", reg, value); +} + +static inline unsigned int sdricoh_readb(struct sdricoh_host *host, + unsigned int reg) +{ + unsigned int value = readb(host->iobase + reg); + dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value); + return value; +} + +static int sdricoh_query_status(struct sdricoh_host *host, unsigned int wanted, + unsigned int timeout){ + unsigned int loop; + unsigned int status = 0; + struct device *dev = host->dev; + for (loop = 0; loop < timeout; loop++) { + status = sdricoh_readl(host, R21C_STATUS); + sdricoh_writel(host, R2E4_STATUS_RESP, status); + if (status & wanted) + break; + } + + if (loop == timeout) { + dev_err(dev, "query_status: timeout waiting for %x\n", wanted); + return -ETIMEDOUT; + } + + /* do not do this check in the loop as some commands fail otherwise */ + if (status & 0x7F0000) { + dev_err(dev, "waiting for status bit %x failed\n", wanted); + return -EINVAL; + } + return 0; + +} + +static int sdricoh_mmc_cmd(struct sdricoh_host *host, unsigned char opcode, + unsigned int arg) +{ + unsigned int status; + int result = 0; + unsigned int loop = 0; + /* reset status reg? */ + sdricoh_writel(host, R21C_STATUS, 0x18); + /* fill parameters */ + sdricoh_writel(host, R204_CMD_ARG, arg); + sdricoh_writel(host, R200_CMD, (0x10000 << 8) | opcode); + /* wait for command completion */ + if (opcode) { + for (loop = 0; loop < CMD_TIMEOUT; loop++) { + status = sdricoh_readl(host, R21C_STATUS); + sdricoh_writel(host, R2E4_STATUS_RESP, status); + if (status & STATUS_CMD_FINISHED) + break; + } + /* don't check for timeout in the loop it is not always + reset correctly + */ + if (loop == CMD_TIMEOUT || status & STATUS_CMD_TIMEOUT) + result = -ETIMEDOUT; + + } + + return result; + +} + +static int sdricoh_reset(struct sdricoh_host *host) +{ + dev_dbg(host->dev, "reset\n"); + sdricoh_writel(host, R2F0_RESET, 0x10001); + sdricoh_writel(host, R2E0_INIT, 0x10000); + if (sdricoh_readl(host, R2E0_INIT) != 0x10000) + return -EIO; + sdricoh_writel(host, R2E0_INIT, 0x10007); + + sdricoh_writel(host, R224_MODE, 0x2000000); + sdricoh_writel(host, R228_POWER, 0xe0); + + + /* status register ? */ + sdricoh_writel(host, R21C_STATUS, 0x18); + + return 0; +} + +static int sdricoh_blockio(struct sdricoh_host *host, int read, + u8 *buf, int len) +{ + int size; + u32 data = 0; + /* wait until the data is available */ + if (read) { + if (sdricoh_query_status(host, STATUS_READY_TO_READ, + TRANSFER_TIMEOUT)) + return -ETIMEDOUT; + sdricoh_writel(host, R21C_STATUS, 0x18); + /* read data */ + while (len) { + data = sdricoh_readl(host, R230_DATA); + size = min(len, 4); + len -= size; + while (size) { + *buf = data & 0xFF; + buf++; + data >>= 8; + size--; + } + } + } else { + if (sdricoh_query_status(host, STATUS_READY_TO_WRITE, + TRANSFER_TIMEOUT)) + return -ETIMEDOUT; + sdricoh_writel(host, R21C_STATUS, 0x18); + /* write data */ + while (len) { + size = min(len, 4); + len -= size; + while (size) { + data >>= 8; + data |= (u32)*buf << 24; + buf++; + size--; + } + sdricoh_writel(host, R230_DATA, data); + } + } + + if (len) + return -EIO; + + return 0; +} + +static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct sdricoh_host *host = mmc_priv(mmc); + struct mmc_command *cmd = mrq->cmd; + struct mmc_data *data = cmd->data; + struct device *dev = host->dev; + unsigned char opcode = cmd->opcode; + int i; + + dev_dbg(dev, "=============================\n"); + dev_dbg(dev, "sdricoh_request opcode=%i\n", opcode); + + sdricoh_writel(host, R21C_STATUS, 0x18); + + /* MMC_APP_CMDs need some special handling */ + if (host->app_cmd) { + opcode |= 64; + host->app_cmd = 0; + } else if (opcode == 55) + host->app_cmd = 1; + + /* read/write commands seem to require this */ + if (data) { + sdricoh_writew(host, R226_BLOCKSIZE, data->blksz); + sdricoh_writel(host, R208_DATAIO, 0); + } + + cmd->error = sdricoh_mmc_cmd(host, opcode, cmd->arg); + + /* read response buffer */ + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + /* CRC is stripped so we need to do some shifting. */ + for (i = 0; i < 4; i++) { + cmd->resp[i] = + sdricoh_readl(host, + R20C_RESP + (3 - i) * 4) << 8; + if (i != 3) + cmd->resp[i] |= + sdricoh_readb(host, R20C_RESP + + (3 - i) * 4 - 1); + } + } else + cmd->resp[0] = sdricoh_readl(host, R20C_RESP); + } + + /* transfer data */ + if (data && cmd->error == 0) { + dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i " + "sg length %i\n", data->blksz, data->blocks, + data->sg_len, data->sg->length); + + /* enter data reading mode */ + sdricoh_writel(host, R21C_STATUS, 0x837f031e); + for (i = 0; i < data->blocks; i++) { + size_t len = data->blksz; + u8 *buf; + struct page *page; + int result; + page = sg_page(data->sg); + + buf = kmap(page) + data->sg->offset + (len * i); + result = + sdricoh_blockio(host, + data->flags & MMC_DATA_READ, buf, len); + kunmap(page); + flush_dcache_page(page); + if (result) { + dev_err(dev, "sdricoh_request: cmd %i " + "block transfer failed\n", cmd->opcode); + cmd->error = result; + break; + } else + data->bytes_xfered += len; + } + + sdricoh_writel(host, R208_DATAIO, 1); + + if (sdricoh_query_status(host, STATUS_TRANSFER_FINISHED, + TRANSFER_TIMEOUT)) { + dev_err(dev, "sdricoh_request: transfer end error\n"); + cmd->error = -EINVAL; + } + } + /* FIXME check busy flag */ + + mmc_request_done(mmc, mrq); + dev_dbg(dev, "=============================\n"); +} + +static void sdricoh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdricoh_host *host = mmc_priv(mmc); + dev_dbg(host->dev, "set_ios\n"); + + if (ios->power_mode == MMC_POWER_ON) { + sdricoh_writel(host, R228_POWER, 0xc0e0); + + if (ios->bus_width == MMC_BUS_WIDTH_4) { + sdricoh_writel(host, R224_MODE, 0x2000300); + sdricoh_writel(host, R228_POWER, 0x40e0); + } else { + sdricoh_writel(host, R224_MODE, 0x2000340); + } + + } else if (ios->power_mode == MMC_POWER_UP) { + sdricoh_writel(host, R224_MODE, 0x2000320); + sdricoh_writel(host, R228_POWER, 0xe0); + } +} + +static int sdricoh_get_ro(struct mmc_host *mmc) +{ + struct sdricoh_host *host = mmc_priv(mmc); + unsigned int status; + + status = sdricoh_readl(host, R21C_STATUS); + sdricoh_writel(host, R2E4_STATUS_RESP, status); + + /* some notebooks seem to have the locked flag switched */ + if (switchlocked) + return !(status & STATUS_CARD_LOCKED); + + return (status & STATUS_CARD_LOCKED); +} + +static struct mmc_host_ops sdricoh_ops = { + .request = sdricoh_request, + .set_ios = sdricoh_set_ios, + .get_ro = sdricoh_get_ro, +}; + +/* initialize the control and register it to the mmc framework */ +static int sdricoh_init_mmc(struct pci_dev *pci_dev, + struct pcmcia_device *pcmcia_dev) +{ + int result = 0; + void __iomem *iobase = NULL; + struct mmc_host *mmc = NULL; + struct sdricoh_host *host = NULL; + struct device *dev = &pcmcia_dev->dev; + /* map iomem */ + if (pci_resource_len(pci_dev, SDRICOH_PCI_REGION) != + SDRICOH_PCI_REGION_SIZE) { + dev_dbg(dev, "unexpected pci resource len\n"); + return -ENODEV; + } + iobase = + pci_iomap(pci_dev, SDRICOH_PCI_REGION, SDRICOH_PCI_REGION_SIZE); + if (!iobase) { + dev_err(dev, "unable to map iobase\n"); + return -ENODEV; + } + /* check version? */ + if (readl(iobase + R104_VERSION) != 0x4000) { + dev_dbg(dev, "no supported mmc controller found\n"); + result = -ENODEV; + goto err; + } + /* allocate privdata */ + mmc = pcmcia_dev->priv = + mmc_alloc_host(sizeof(struct sdricoh_host), &pcmcia_dev->dev); + if (!mmc) { + dev_err(dev, "mmc_alloc_host failed\n"); + result = -ENOMEM; + goto err; + } + host = mmc_priv(mmc); + + host->iobase = iobase; + host->dev = dev; + host->pci_dev = pci_dev; + + mmc->ops = &sdricoh_ops; + + /* FIXME: frequency and voltage handling is done by the controller + */ + mmc->f_min = 450000; + mmc->f_max = 24000000; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->caps |= MMC_CAP_4_BIT_DATA; + + mmc->max_seg_size = 1024 * 512; + mmc->max_blk_size = 512; + + /* reset the controler */ + if (sdricoh_reset(host)) { + dev_dbg(dev, "could not reset\n"); + result = -EIO; + goto err; + + } + + result = mmc_add_host(mmc); + + if (!result) { + dev_dbg(dev, "mmc host registered\n"); + return 0; + } + +err: + if (iobase) + iounmap(iobase); + if (mmc) + mmc_free_host(mmc); + + return result; +} + +/* search for supported mmc controllers */ +static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev) +{ + struct pci_dev *pci_dev = NULL; + + dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device" + " %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]); + + /* search pci cardbus bridge that contains the mmc controler */ + /* the io region is already claimed by yenta_socket... */ + while ((pci_dev = + pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, + pci_dev))) { + /* try to init the device */ + if (!sdricoh_init_mmc(pci_dev, pcmcia_dev)) { + dev_info(&pcmcia_dev->dev, "MMC controller found\n"); + return 0; + } + + } + dev_err(&pcmcia_dev->dev, "No MMC controller was found.\n"); + return -ENODEV; +} + +static void sdricoh_pcmcia_detach(struct pcmcia_device *link) +{ + struct mmc_host *mmc = link->priv; + + dev_dbg(&link->dev, "detach\n"); + + /* remove mmc host */ + if (mmc) { + struct sdricoh_host *host = mmc_priv(mmc); + mmc_remove_host(mmc); + pci_iounmap(host->pci_dev, host->iobase); + pci_dev_put(host->pci_dev); + mmc_free_host(mmc); + } + pcmcia_disable_device(link); + +} + +#ifdef CONFIG_PM +static int sdricoh_pcmcia_suspend(struct pcmcia_device *link) +{ + struct mmc_host *mmc = link->priv; + dev_dbg(&link->dev, "suspend\n"); + mmc_suspend_host(mmc, PMSG_SUSPEND); + return 0; +} + +static int sdricoh_pcmcia_resume(struct pcmcia_device *link) +{ + struct mmc_host *mmc = link->priv; + dev_dbg(&link->dev, "resume\n"); + sdricoh_reset(mmc_priv(mmc)); + mmc_resume_host(mmc); + return 0; +} +#else +#define sdricoh_pcmcia_suspend NULL +#define sdricoh_pcmcia_resume NULL +#endif + +static struct pcmcia_driver sdricoh_driver = { + .drv = { + .name = DRIVER_NAME, + }, + .probe = sdricoh_pcmcia_probe, + .remove = sdricoh_pcmcia_detach, + .id_table = pcmcia_ids, + .suspend = sdricoh_pcmcia_suspend, + .resume = sdricoh_pcmcia_resume, +}; + +/*****************************************************************************\ + * * + * Driver init/exit * + * * +\*****************************************************************************/ + +static int __init sdricoh_drv_init(void) +{ + return pcmcia_register_driver(&sdricoh_driver); +} + +static void __exit sdricoh_drv_exit(void) +{ + pcmcia_unregister_driver(&sdricoh_driver); +} + +module_init(sdricoh_drv_init); +module_exit(sdricoh_drv_exit); + +module_param(switchlocked, uint, 0444); + +MODULE_AUTHOR("Sascha Sommer "); +MODULE_DESCRIPTION("Ricoh PCMCIA Secure Digital Interface driver"); +MODULE_LICENSE("GPL"); + +MODULE_PARM_DESC(switchlocked, "Switch the cards locked status." + "Use this when unlocked cards are shown readonly (default 0)"); -- cgit v1.2.3 From c43d8636971c39da993e94082fd65bfff421618e Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 10 Jul 2008 12:28:48 +0100 Subject: sdio_uart: Fix SDIO break control to now return success or an error This is a consequence of patch 9ea761bfef52c116fed4715d4043392c2503fe6a. Signed-off-by: David Howells Signed-off-by: Pierre Ossman --- drivers/mmc/card/sdio_uart.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c index eeea84c309e6..78ad48718ab0 100644 --- a/drivers/mmc/card/sdio_uart.c +++ b/drivers/mmc/card/sdio_uart.c @@ -885,12 +885,14 @@ static void sdio_uart_set_termios(struct tty_struct *tty, struct ktermios *old_t sdio_uart_release_func(port); } -static void sdio_uart_break_ctl(struct tty_struct *tty, int break_state) +static int sdio_uart_break_ctl(struct tty_struct *tty, int break_state) { struct sdio_uart_port *port = tty->driver_data; + int result; - if (sdio_uart_claim_func(port) != 0) - return; + result = sdio_uart_claim_func(port); + if (result != 0) + return result; if (break_state == -1) port->lcr |= UART_LCR_SBC; @@ -899,6 +901,7 @@ static void sdio_uart_break_ctl(struct tty_struct *tty, int break_state) sdio_out(port, UART_LCR, port->lcr); sdio_uart_release_func(port); + return 0; } static int sdio_uart_tiocmget(struct tty_struct *tty, struct file *file) -- cgit v1.2.3 From fe9233fb6914a0eb20166c967e3020f7f0fba2c9 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Fri, 23 May 2008 18:16:40 -0700 Subject: [SCSI] scsi_dh: fix kconfig related build errors Do not automatically "select" SCSI_DH for dm-multipath. If SCSI_DH doesn't exist,just do not allow hardware handlers to be used. Handle SCSI_DH being a module also. Make sure it doesn't allow DM_MULTIPATH to be compiled in when SCSI_DH is a module. [jejb: added comment for Kconfig syntax] Signed-off-by: Chandra Seetharaman Reported-by: Randy Dunlap Reported-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/md/Kconfig | 6 +++++- drivers/md/dm-mpath.c | 2 ++ include/scsi/scsi_dh.h | 12 +++++++++++- 3 files changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index b4a3c7d1451d..07d92c11b5d8 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -252,7 +252,11 @@ config DM_ZERO config DM_MULTIPATH tristate "Multipath target" depends on BLK_DEV_DM - select SCSI_DH + # nasty syntax but means make DM_MULTIPATH independent + # of SCSI_DH if the latter isn't defined but if + # it is, DM_MULTIPATH must depend on it. We get a build + # error if SCSI_DH=m and DM_MULTIPATH=y + depends on SCSI_DH || !SCSI_DH ---help--- Allow volume managers to support multipath hardware. diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index e8f704aa46f2..9f7302d4878d 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -664,6 +664,8 @@ static int parse_hw_handler(struct arg_set *as, struct multipath *m) request_module("scsi_dh_%s", m->hw_handler_name); if (scsi_dh_handler_exist(m->hw_handler_name) == 0) { ti->error = "unknown hardware handler type"; + kfree(m->hw_handler_name); + m->hw_handler_name = NULL; return -EINVAL; } consume(as, hw_argc - 1); diff --git a/include/scsi/scsi_dh.h b/include/scsi/scsi_dh.h index 04d0d8495c83..3ad2303d1a16 100644 --- a/include/scsi/scsi_dh.h +++ b/include/scsi/scsi_dh.h @@ -54,6 +54,16 @@ enum { SCSI_DH_NOSYS, SCSI_DH_DRIVER_MAX, }; - +#if defined(CONFIG_SCSI_DH) || defined(CONFIG_SCSI_DH_MODULE) extern int scsi_dh_activate(struct request_queue *); extern int scsi_dh_handler_exist(const char *); +#else +static inline int scsi_dh_activate(struct request_queue *req) +{ + return 0; +} +static inline int scsi_dh_handler_exist(const char *name) +{ + return 0; +} +#endif -- cgit v1.2.3 From 1e51764a3c2ac05a23a22b2a95ddee4d9bffb16d Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 14 Jul 2008 19:08:37 +0300 Subject: UBIFS: add new flash file system This is a new flash file system. See http://www.linux-mtd.infradead.org/doc/ubifs.html Signed-off-by: Artem Bityutskiy Signed-off-by: Adrian Hunter --- fs/ubifs/budget.c | 731 ++++++++++++ fs/ubifs/commit.c | 677 +++++++++++ fs/ubifs/compress.c | 253 +++++ fs/ubifs/debug.c | 2289 +++++++++++++++++++++++++++++++++++++ fs/ubifs/debug.h | 403 +++++++ fs/ubifs/dir.c | 1240 ++++++++++++++++++++ fs/ubifs/file.c | 1275 +++++++++++++++++++++ fs/ubifs/find.c | 975 ++++++++++++++++ fs/ubifs/gc.c | 773 +++++++++++++ fs/ubifs/io.c | 914 +++++++++++++++ fs/ubifs/ioctl.c | 204 ++++ fs/ubifs/journal.c | 1387 +++++++++++++++++++++++ fs/ubifs/key.h | 533 +++++++++ fs/ubifs/log.c | 805 +++++++++++++ fs/ubifs/lprops.c | 1357 ++++++++++++++++++++++ fs/ubifs/lpt.c | 2243 ++++++++++++++++++++++++++++++++++++ fs/ubifs/lpt_commit.c | 1648 +++++++++++++++++++++++++++ fs/ubifs/master.c | 387 +++++++ fs/ubifs/misc.h | 342 ++++++ fs/ubifs/orphan.c | 958 ++++++++++++++++ fs/ubifs/recovery.c | 1519 +++++++++++++++++++++++++ fs/ubifs/replay.c | 1075 ++++++++++++++++++ fs/ubifs/sb.c | 629 +++++++++++ fs/ubifs/scan.c | 362 ++++++ fs/ubifs/shrinker.c | 322 ++++++ fs/ubifs/super.c | 1951 ++++++++++++++++++++++++++++++++ fs/ubifs/tnc.c | 2956 ++++++++++++++++++++++++++++++++++++++++++++++++ fs/ubifs/tnc_commit.c | 1103 ++++++++++++++++++ fs/ubifs/tnc_misc.c | 494 ++++++++ fs/ubifs/ubifs-media.h | 745 ++++++++++++ fs/ubifs/ubifs.h | 1649 +++++++++++++++++++++++++++ fs/ubifs/xattr.c | 581 ++++++++++ 32 files changed, 32780 insertions(+) create mode 100644 fs/ubifs/budget.c create mode 100644 fs/ubifs/commit.c create mode 100644 fs/ubifs/compress.c create mode 100644 fs/ubifs/debug.c create mode 100644 fs/ubifs/debug.h create mode 100644 fs/ubifs/dir.c create mode 100644 fs/ubifs/file.c create mode 100644 fs/ubifs/find.c create mode 100644 fs/ubifs/gc.c create mode 100644 fs/ubifs/io.c create mode 100644 fs/ubifs/ioctl.c create mode 100644 fs/ubifs/journal.c create mode 100644 fs/ubifs/key.h create mode 100644 fs/ubifs/log.c create mode 100644 fs/ubifs/lprops.c create mode 100644 fs/ubifs/lpt.c create mode 100644 fs/ubifs/lpt_commit.c create mode 100644 fs/ubifs/master.c create mode 100644 fs/ubifs/misc.h create mode 100644 fs/ubifs/orphan.c create mode 100644 fs/ubifs/recovery.c create mode 100644 fs/ubifs/replay.c create mode 100644 fs/ubifs/sb.c create mode 100644 fs/ubifs/scan.c create mode 100644 fs/ubifs/shrinker.c create mode 100644 fs/ubifs/super.c create mode 100644 fs/ubifs/tnc.c create mode 100644 fs/ubifs/tnc_commit.c create mode 100644 fs/ubifs/tnc_misc.c create mode 100644 fs/ubifs/ubifs-media.h create mode 100644 fs/ubifs/ubifs.h create mode 100644 fs/ubifs/xattr.c diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c new file mode 100644 index 000000000000..d81fb9ed2b8e --- /dev/null +++ b/fs/ubifs/budget.c @@ -0,0 +1,731 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Adrian Hunter + * Artem Bityutskiy (Битюцкий Артём) + */ + +/* + * This file implements the budgeting sub-system which is responsible for UBIFS + * space management. + * + * Factors such as compression, wasted space at the ends of LEBs, space in other + * journal heads, the effect of updates on the index, and so on, make it + * impossible to accurately predict the amount of space needed. Consequently + * approximations are used. + */ + +#include "ubifs.h" +#include +#include + +/* + * When pessimistic budget calculations say that there is no enough space, + * UBIFS starts writing back dirty inodes and pages, doing garbage collection, + * or committing. The below constants define maximum number of times UBIFS + * repeats the operations. + */ +#define MAX_SHRINK_RETRIES 8 +#define MAX_GC_RETRIES 4 +#define MAX_CMT_RETRIES 2 +#define MAX_NOSPC_RETRIES 1 + +/* + * The below constant defines amount of dirty pages which should be written + * back at when trying to shrink the liability. + */ +#define NR_TO_WRITE 16 + +/** + * struct retries_info - information about re-tries while making free space. + * @prev_liability: previous liability + * @shrink_cnt: how many times the liability was shrinked + * @shrink_retries: count of liability shrink re-tries (increased when + * liability does not shrink) + * @try_gc: GC should be tried first + * @gc_retries: how many times GC was run + * @cmt_retries: how many times commit has been done + * @nospc_retries: how many times GC returned %-ENOSPC + * + * Since we consider budgeting to be the fast-path, and this structure has to + * be allocated on stack and zeroed out, we make it smaller using bit-fields. + */ +struct retries_info { + long long prev_liability; + unsigned int shrink_cnt; + unsigned int shrink_retries:5; + unsigned int try_gc:1; + unsigned int gc_retries:4; + unsigned int cmt_retries:3; + unsigned int nospc_retries:1; +}; + +/** + * shrink_liability - write-back some dirty pages/inodes. + * @c: UBIFS file-system description object + * @nr_to_write: how many dirty pages to write-back + * + * This function shrinks UBIFS liability by means of writing back some amount + * of dirty inodes and their pages. Returns the amount of pages which were + * written back. The returned value does not include dirty inodes which were + * synchronized. + * + * Note, this function synchronizes even VFS inodes which are locked + * (@i_mutex) by the caller of the budgeting function, because write-back does + * not touch @i_mutex. + */ +static int shrink_liability(struct ubifs_info *c, int nr_to_write) +{ + int nr_written; + struct writeback_control wbc = { + .sync_mode = WB_SYNC_NONE, + .range_end = LLONG_MAX, + .nr_to_write = nr_to_write, + }; + + generic_sync_sb_inodes(c->vfs_sb, &wbc); + nr_written = nr_to_write - wbc.nr_to_write; + + if (!nr_written) { + /* + * Re-try again but wait on pages/inodes which are being + * written-back concurrently (e.g., by pdflush). + */ + memset(&wbc, 0, sizeof(struct writeback_control)); + wbc.sync_mode = WB_SYNC_ALL; + wbc.range_end = LLONG_MAX; + wbc.nr_to_write = nr_to_write; + generic_sync_sb_inodes(c->vfs_sb, &wbc); + nr_written = nr_to_write - wbc.nr_to_write; + } + + dbg_budg("%d pages were written back", nr_written); + return nr_written; +} + + +/** + * run_gc - run garbage collector. + * @c: UBIFS file-system description object + * + * This function runs garbage collector to make some more free space. Returns + * zero if a free LEB has been produced, %-EAGAIN if commit is required, and a + * negative error code in case of failure. + */ +static int run_gc(struct ubifs_info *c) +{ + int err, lnum; + + /* Make some free space by garbage-collecting dirty space */ + down_read(&c->commit_sem); + lnum = ubifs_garbage_collect(c, 1); + up_read(&c->commit_sem); + if (lnum < 0) + return lnum; + + /* GC freed one LEB, return it to lprops */ + dbg_budg("GC freed LEB %d", lnum); + err = ubifs_return_leb(c, lnum); + if (err) + return err; + return 0; +} + +/** + * make_free_space - make more free space on the file-system. + * @c: UBIFS file-system description object + * @ri: information about previous invocations of this function + * + * This function is called when an operation cannot be budgeted because there + * is supposedly no free space. But in most cases there is some free space: + * o budgeting is pessimistic, so it always budgets more then it is actually + * needed, so shrinking the liability is one way to make free space - the + * cached data will take less space then it was budgeted for; + * o GC may turn some dark space into free space (budgeting treats dark space + * as not available); + * o commit may free some LEB, i.e., turn freeable LEBs into free LEBs. + * + * So this function tries to do the above. Returns %-EAGAIN if some free space + * was presumably made and the caller has to re-try budgeting the operation. + * Returns %-ENOSPC if it couldn't do more free space, and other negative error + * codes on failures. + */ +static int make_free_space(struct ubifs_info *c, struct retries_info *ri) +{ + int err; + + /* + * If we have some dirty pages and inodes (liability), try to write + * them back unless this was tried too many times without effect + * already. + */ + if (ri->shrink_retries < MAX_SHRINK_RETRIES && !ri->try_gc) { + long long liability; + + spin_lock(&c->space_lock); + liability = c->budg_idx_growth + c->budg_data_growth + + c->budg_dd_growth; + spin_unlock(&c->space_lock); + + if (ri->prev_liability >= liability) { + /* Liability does not shrink, next time try GC then */ + ri->shrink_retries += 1; + if (ri->gc_retries < MAX_GC_RETRIES) + ri->try_gc = 1; + dbg_budg("liability did not shrink: retries %d of %d", + ri->shrink_retries, MAX_SHRINK_RETRIES); + } + + dbg_budg("force write-back (count %d)", ri->shrink_cnt); + shrink_liability(c, NR_TO_WRITE + ri->shrink_cnt); + + ri->prev_liability = liability; + ri->shrink_cnt += 1; + return -EAGAIN; + } + + /* + * Try to run garbage collector unless it was already tried too many + * times. + */ + if (ri->gc_retries < MAX_GC_RETRIES) { + ri->gc_retries += 1; + dbg_budg("run GC, retries %d of %d", + ri->gc_retries, MAX_GC_RETRIES); + + ri->try_gc = 0; + err = run_gc(c); + if (!err) + return -EAGAIN; + + if (err == -EAGAIN) { + dbg_budg("GC asked to commit"); + err = ubifs_run_commit(c); + if (err) + return err; + return -EAGAIN; + } + + if (err != -ENOSPC) + return err; + + /* + * GC could not make any progress. If this is the first time, + * then it makes sense to try to commit, because it might make + * some dirty space. + */ + dbg_budg("GC returned -ENOSPC, retries %d", + ri->nospc_retries); + if (ri->nospc_retries >= MAX_NOSPC_RETRIES) + return err; + ri->nospc_retries += 1; + } + + /* Neither GC nor write-back helped, try to commit */ + if (ri->cmt_retries < MAX_CMT_RETRIES) { + ri->cmt_retries += 1; + dbg_budg("run commit, retries %d of %d", + ri->cmt_retries, MAX_CMT_RETRIES); + err = ubifs_run_commit(c); + if (err) + return err; + return -EAGAIN; + } + return -ENOSPC; +} + +/** + * ubifs_calc_min_idx_lebs - calculate amount of eraseblocks for the index. + * @c: UBIFS file-system description object + * + * This function calculates and returns the number of eraseblocks which should + * be kept for index usage. + */ +int ubifs_calc_min_idx_lebs(struct ubifs_info *c) +{ + int ret; + uint64_t idx_size; + + idx_size = c->old_idx_sz + c->budg_idx_growth + c->budg_uncommitted_idx; + + /* And make sure we have twice the index size of space reserved */ + idx_size <<= 1; + + /* + * We do not maintain 'old_idx_size' as 'old_idx_lebs'/'old_idx_bytes' + * pair, nor similarly the two variables for the new index size, so we + * have to do this costly 64-bit division on fast-path. + */ + if (do_div(idx_size, c->leb_size - c->max_idx_node_sz)) + ret = idx_size + 1; + else + ret = idx_size; + /* + * The index head is not available for the in-the-gaps method, so add an + * extra LEB to compensate. + */ + ret += 1; + /* + * At present the index needs at least 2 LEBs: one for the index head + * and one for in-the-gaps method (which currently does not cater for + * the index head and so excludes it from consideration). + */ + if (ret < 2) + ret = 2; + return ret; +} + +/** + * ubifs_calc_available - calculate available FS space. + * @c: UBIFS file-system description object + * @min_idx_lebs: minimum number of LEBs reserved for the index + * + * This function calculates and returns amount of FS space available for use. + */ +long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs) +{ + int subtract_lebs; + long long available; + + /* + * Force the amount available to the total size reported if the used + * space is zero. + */ + if (c->lst.total_used <= UBIFS_INO_NODE_SZ && + c->budg_data_growth + c->budg_dd_growth == 0) { + /* Do the same calculation as for c->block_cnt */ + available = c->main_lebs - 2; + available *= c->leb_size - c->dark_wm; + return available; + } + + available = c->main_bytes - c->lst.total_used; + + /* + * Now 'available' contains theoretically available flash space + * assuming there is no index, so we have to subtract the space which + * is reserved for the index. + */ + subtract_lebs = min_idx_lebs; + + /* Take into account that GC reserves one LEB for its own needs */ + subtract_lebs += 1; + + /* + * The GC journal head LEB is not really accessible. And since + * different write types go to different heads, we may count only on + * one head's space. + */ + subtract_lebs += c->jhead_cnt - 1; + + /* We also reserve one LEB for deletions, which bypass budgeting */ + subtract_lebs += 1; + + available -= (long long)subtract_lebs * c->leb_size; + + /* Subtract the dead space which is not available for use */ + available -= c->lst.total_dead; + + /* + * Subtract dark space, which might or might not be usable - it depends + * on the data which we have on the media and which will be written. If + * this is a lot of uncompressed or not-compressible data, the dark + * space cannot be used. + */ + available -= c->lst.total_dark; + + /* + * However, there is more dark space. The index may be bigger than + * @min_idx_lebs. Those extra LEBs are assumed to be available, but + * their dark space is not included in total_dark, so it is subtracted + * here. + */ + if (c->lst.idx_lebs > min_idx_lebs) { + subtract_lebs = c->lst.idx_lebs - min_idx_lebs; + available -= subtract_lebs * c->dark_wm; + } + + /* The calculations are rough and may end up with a negative number */ + return available > 0 ? available : 0; +} + +/** + * can_use_rp - check whether the user is allowed to use reserved pool. + * @c: UBIFS file-system description object + * + * UBIFS has so-called "reserved pool" which is flash space reserved + * for the superuser and for uses whose UID/GID is recorded in UBIFS superblock. + * This function checks whether current user is allowed to use reserved pool. + * Returns %1 current user is allowed to use reserved pool and %0 otherwise. + */ +static int can_use_rp(struct ubifs_info *c) +{ + if (current->fsuid == c->rp_uid || capable(CAP_SYS_RESOURCE) || + (c->rp_gid != 0 && in_group_p(c->rp_gid))) + return 1; + return 0; +} + +/** + * do_budget_space - reserve flash space for index and data growth. + * @c: UBIFS file-system description object + * + * This function makes sure UBIFS has enough free eraseblocks for index growth + * and data. + * + * When budgeting index space, UBIFS reserves twice as more LEBs as the index + * would take if it was consolidated and written to the flash. This guarantees + * that the "in-the-gaps" commit method always succeeds and UBIFS will always + * be able to commit dirty index. So this function basically adds amount of + * budgeted index space to the size of the current index, multiplies this by 2, + * and makes sure this does not exceed the amount of free eraseblocks. + * + * Notes about @c->min_idx_lebs and @c->lst.idx_lebs variables: + * o @c->lst.idx_lebs is the number of LEBs the index currently uses. It might + * be large, because UBIFS does not do any index consolidation as long as + * there is free space. IOW, the index may take a lot of LEBs, but the LEBs + * will contain a lot of dirt. + * o @c->min_idx_lebs is the the index presumably takes. IOW, the index may be + * consolidated to take up to @c->min_idx_lebs LEBs. + * + * This function returns zero in case of success, and %-ENOSPC in case of + * failure. + */ +static int do_budget_space(struct ubifs_info *c) +{ + long long outstanding, available; + int lebs, rsvd_idx_lebs, min_idx_lebs; + + /* First budget index space */ + min_idx_lebs = ubifs_calc_min_idx_lebs(c); + + /* Now 'min_idx_lebs' contains number of LEBs to reserve */ + if (min_idx_lebs > c->lst.idx_lebs) + rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs; + else + rsvd_idx_lebs = 0; + + /* + * The number of LEBs that are available to be used by the index is: + * + * @c->lst.empty_lebs + @c->freeable_cnt + @c->idx_gc_cnt - + * @c->lst.taken_empty_lebs + * + * @empty_lebs are available because they are empty. @freeable_cnt are + * available because they contain only free and dirty space and the + * index allocation always occurs after wbufs are synch'ed. + * @idx_gc_cnt are available because they are index LEBs that have been + * garbage collected (including trivial GC) and are awaiting the commit + * before they can be unmapped - note that the in-the-gaps method will + * grab these if it needs them. @taken_empty_lebs are empty_lebs that + * have already been allocated for some purpose (also includes those + * LEBs on the @idx_gc list). + * + * Note, @taken_empty_lebs may temporarily be higher by one because of + * the way we serialize LEB allocations and budgeting. See a comment in + * 'ubifs_find_free_space()'. + */ + lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt - + c->lst.taken_empty_lebs; + if (unlikely(rsvd_idx_lebs > lebs)) { + dbg_budg("out of indexing space: min_idx_lebs %d (old %d), " + "rsvd_idx_lebs %d", min_idx_lebs, c->min_idx_lebs, + rsvd_idx_lebs); + return -ENOSPC; + } + + available = ubifs_calc_available(c, min_idx_lebs); + outstanding = c->budg_data_growth + c->budg_dd_growth; + + if (unlikely(available < outstanding)) { + dbg_budg("out of data space: available %lld, outstanding %lld", + available, outstanding); + return -ENOSPC; + } + + if (available - outstanding <= c->rp_size && !can_use_rp(c)) + return -ENOSPC; + + c->min_idx_lebs = min_idx_lebs; + return 0; +} + +/** + * calc_idx_growth - calculate approximate index growth from budgeting request. + * @c: UBIFS file-system description object + * @req: budgeting request + * + * For now we assume each new node adds one znode. But this is rather poor + * approximation, though. + */ +static int calc_idx_growth(const struct ubifs_info *c, + const struct ubifs_budget_req *req) +{ + int znodes; + + znodes = req->new_ino + (req->new_page << UBIFS_BLOCKS_PER_PAGE_SHIFT) + + req->new_dent; + return znodes * c->max_idx_node_sz; +} + +/** + * calc_data_growth - calculate approximate amount of new data from budgeting + * request. + * @c: UBIFS file-system description object + * @req: budgeting request + */ +static int calc_data_growth(const struct ubifs_info *c, + const struct ubifs_budget_req *req) +{ + int data_growth; + + data_growth = req->new_ino ? c->inode_budget : 0; + if (req->new_page) + data_growth += c->page_budget; + if (req->new_dent) + data_growth += c->dent_budget; + data_growth += req->new_ino_d; + return data_growth; +} + +/** + * calc_dd_growth - calculate approximate amount of data which makes other data + * dirty from budgeting request. + * @c: UBIFS file-system description object + * @req: budgeting request + */ +static int calc_dd_growth(const struct ubifs_info *c, + const struct ubifs_budget_req *req) +{ + int dd_growth; + + dd_growth = req->dirtied_page ? c->page_budget : 0; + + if (req->dirtied_ino) + dd_growth += c->inode_budget << (req->dirtied_ino - 1); + if (req->mod_dent) + dd_growth += c->dent_budget; + dd_growth += req->dirtied_ino_d; + return dd_growth; +} + +/** + * ubifs_budget_space - ensure there is enough space to complete an operation. + * @c: UBIFS file-system description object + * @req: budget request + * + * This function allocates budget for an operation. It uses pessimistic + * approximation of how much flash space the operation needs. The goal of this + * function is to make sure UBIFS always has flash space to flush all dirty + * pages, dirty inodes, and dirty znodes (liability). This function may force + * commit, garbage-collection or write-back. Returns zero in case of success, + * %-ENOSPC if there is no free space and other negative error codes in case of + * failures. + */ +int ubifs_budget_space(struct ubifs_info *c, struct ubifs_budget_req *req) +{ + int uninitialized_var(cmt_retries), uninitialized_var(wb_retries); + int err, idx_growth, data_growth, dd_growth; + struct retries_info ri; + + ubifs_assert(req->dirtied_ino <= 4); + ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4); + + data_growth = calc_data_growth(c, req); + dd_growth = calc_dd_growth(c, req); + if (!data_growth && !dd_growth) + return 0; + idx_growth = calc_idx_growth(c, req); + memset(&ri, 0, sizeof(struct retries_info)); + +again: + spin_lock(&c->space_lock); + ubifs_assert(c->budg_idx_growth >= 0); + ubifs_assert(c->budg_data_growth >= 0); + ubifs_assert(c->budg_dd_growth >= 0); + + if (unlikely(c->nospace) && (c->nospace_rp || !can_use_rp(c))) { + dbg_budg("no space"); + spin_unlock(&c->space_lock); + return -ENOSPC; + } + + c->budg_idx_growth += idx_growth; + c->budg_data_growth += data_growth; + c->budg_dd_growth += dd_growth; + + err = do_budget_space(c); + if (likely(!err)) { + req->idx_growth = idx_growth; + req->data_growth = data_growth; + req->dd_growth = dd_growth; + spin_unlock(&c->space_lock); + return 0; + } + + /* Restore the old values */ + c->budg_idx_growth -= idx_growth; + c->budg_data_growth -= data_growth; + c->budg_dd_growth -= dd_growth; + spin_unlock(&c->space_lock); + + if (req->fast) { + dbg_budg("no space for fast budgeting"); + return err; + } + + err = make_free_space(c, &ri); + if (err == -EAGAIN) { + dbg_budg("try again"); + cond_resched(); + goto again; + } else if (err == -ENOSPC) { + dbg_budg("FS is full, -ENOSPC"); + c->nospace = 1; + if (can_use_rp(c) || c->rp_size == 0) + c->nospace_rp = 1; + smp_wmb(); + } else + ubifs_err("cannot budget space, error %d", err); + return err; +} + +/** + * ubifs_release_budget - release budgeted free space. + * @c: UBIFS file-system description object + * @req: budget request + * + * This function releases the space budgeted by 'ubifs_budget_space()'. Note, + * since the index changes (which were budgeted for in @req->idx_growth) will + * only be written to the media on commit, this function moves the index budget + * from @c->budg_idx_growth to @c->budg_uncommitted_idx. The latter will be + * zeroed by the commit operation. + */ +void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req) +{ + ubifs_assert(req->dirtied_ino <= 4); + ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4); + if (!req->recalculate) { + ubifs_assert(req->idx_growth >= 0); + ubifs_assert(req->data_growth >= 0); + ubifs_assert(req->dd_growth >= 0); + } + + if (req->recalculate) { + req->data_growth = calc_data_growth(c, req); + req->dd_growth = calc_dd_growth(c, req); + req->idx_growth = calc_idx_growth(c, req); + } + + if (!req->data_growth && !req->dd_growth) + return; + + c->nospace = c->nospace_rp = 0; + smp_wmb(); + + spin_lock(&c->space_lock); + c->budg_idx_growth -= req->idx_growth; + c->budg_uncommitted_idx += req->idx_growth; + c->budg_data_growth -= req->data_growth; + c->budg_dd_growth -= req->dd_growth; + c->min_idx_lebs = ubifs_calc_min_idx_lebs(c); + + ubifs_assert(c->budg_idx_growth >= 0); + ubifs_assert(c->budg_data_growth >= 0); + ubifs_assert(c->min_idx_lebs < c->main_lebs); + spin_unlock(&c->space_lock); +} + +/** + * ubifs_convert_page_budget - convert budget of a new page. + * @c: UBIFS file-system description object + * + * This function converts budget which was allocated for a new page of data to + * the budget of changing an existing page of data. The latter is smaller then + * the former, so this function only does simple re-calculation and does not + * involve any write-back. + */ +void ubifs_convert_page_budget(struct ubifs_info *c) +{ + spin_lock(&c->space_lock); + /* Release the index growth reservation */ + c->budg_idx_growth -= c->max_idx_node_sz << UBIFS_BLOCKS_PER_PAGE_SHIFT; + /* Release the data growth reservation */ + c->budg_data_growth -= c->page_budget; + /* Increase the dirty data growth reservation instead */ + c->budg_dd_growth += c->page_budget; + /* And re-calculate the indexing space reservation */ + c->min_idx_lebs = ubifs_calc_min_idx_lebs(c); + spin_unlock(&c->space_lock); +} + +/** + * ubifs_release_dirty_inode_budget - release dirty inode budget. + * @c: UBIFS file-system description object + * @ui: UBIFS inode to release the budget for + * + * This function releases budget corresponding to a dirty inode. It is usually + * called when after the inode has been written to the media and marked as + * clean. + */ +void ubifs_release_dirty_inode_budget(struct ubifs_info *c, + struct ubifs_inode *ui) +{ + struct ubifs_budget_req req = {.dd_growth = c->inode_budget, + .dirtied_ino_d = ui->data_len}; + + ubifs_release_budget(c, &req); +} + +/** + * ubifs_budg_get_free_space - return amount of free space. + * @c: UBIFS file-system description object + * + * This function returns amount of free space on the file-system. + */ +long long ubifs_budg_get_free_space(struct ubifs_info *c) +{ + int min_idx_lebs, rsvd_idx_lebs; + long long available, outstanding, free; + + /* Do exactly the same calculations as in 'do_budget_space()' */ + spin_lock(&c->space_lock); + min_idx_lebs = ubifs_calc_min_idx_lebs(c); + + if (min_idx_lebs > c->lst.idx_lebs) + rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs; + else + rsvd_idx_lebs = 0; + + if (rsvd_idx_lebs > c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt + - c->lst.taken_empty_lebs) { + spin_unlock(&c->space_lock); + return 0; + } + + available = ubifs_calc_available(c, min_idx_lebs); + outstanding = c->budg_data_growth + c->budg_dd_growth; + c->min_idx_lebs = min_idx_lebs; + spin_unlock(&c->space_lock); + + if (available > outstanding) + free = ubifs_reported_space(c, available - outstanding); + else + free = 0; + return free; +} diff --git a/fs/ubifs/commit.c b/fs/ubifs/commit.c new file mode 100644 index 000000000000..3b516316c9b3 --- /dev/null +++ b/fs/ubifs/commit.c @@ -0,0 +1,677 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Adrian Hunter + * Artem Bityutskiy (Битюцкий Артём) + */ + +/* + * This file implements functions that manage the running of the commit process. + * Each affected module has its own functions to accomplish their part in the + * commit and those functions are called here. + * + * The commit is the process whereby all updates to the index and LEB properties + * are written out together and the journal becomes empty. This keeps the + * file system consistent - at all times the state can be recreated by reading + * the index and LEB properties and then replaying the journal. + * + * The commit is split into two parts named "commit start" and "commit end". + * During commit start, the commit process has exclusive access to the journal + * by holding the commit semaphore down for writing. As few I/O operations as + * possible are performed during commit start, instead the nodes that are to be + * written are merely identified. During commit end, the commit semaphore is no + * longer held and the journal is again in operation, allowing users to continue + * to use the file system while the bulk of the commit I/O is performed. The + * purpose of this two-step approach is to prevent the commit from causing any + * latency blips. Note that in any case, the commit does not prevent lookups + * (as permitted by the TNC mutex), or access to VFS data structures e.g. page + * cache. + */ + +#include +#include +#include "ubifs.h" + +/** + * do_commit - commit the journal. + * @c: UBIFS file-system description object + * + * This function implements UBIFS commit. It has to be called with commit lock + * locked. Returns zero in case of success and a negative error code in case of + * failure. + */ +static int do_commit(struct ubifs_info *c) +{ + int err, new_ltail_lnum, old_ltail_lnum, i; + struct ubifs_zbranch zroot; + struct ubifs_lp_stats lst; + + dbg_cmt("start"); + if (c->ro_media) { + err = -EROFS; + goto out_up; + } + + /* Sync all write buffers (necessary for recovery) */ + for (i = 0; i < c->jhead_cnt; i++) { + err = ubifs_wbuf_sync(&c->jheads[i].wbuf); + if (err) + goto out_up; + } + + err = ubifs_gc_start_commit(c); + if (err) + goto out_up; + err = dbg_check_lprops(c); + if (err) + goto out_up; + err = ubifs_log_start_commit(c, &new_ltail_lnum); + if (err) + goto out_up; + err = ubifs_tnc_start_commit(c, &zroot); + if (err) + goto out_up; + err = ubifs_lpt_start_commit(c); + if (err) + goto out_up; + err = ubifs_orphan_start_commit(c); + if (err) + goto out_up; + + ubifs_get_lp_stats(c, &lst); + + up_write(&c->commit_sem); + + err = ubifs_tnc_end_commit(c); + if (err) + goto out; + err = ubifs_lpt_end_commit(c); + if (err) + goto out; + err = ubifs_orphan_end_commit(c); + if (err) + goto out; + old_ltail_lnum = c->ltail_lnum; + err = ubifs_log_end_commit(c, new_ltail_lnum); + if (err) + goto out; + err = dbg_check_old_index(c, &zroot); + if (err) + goto out; + + mutex_lock(&c->mst_mutex); + c->mst_node->cmt_no = cpu_to_le64(++c->cmt_no); + c->mst_node->log_lnum = cpu_to_le32(new_ltail_lnum); + c->mst_node->root_lnum = cpu_to_le32(zroot.lnum); + c->mst_node->root_offs = cpu_to_le32(zroot.offs); + c->mst_node->root_len = cpu_to_le32(zroot.len); + c->mst_node->ihead_lnum = cpu_to_le32(c->ihead_lnum); + c->mst_node->ihead_offs = cpu_to_le32(c->ihead_offs); + c->mst_node->index_size = cpu_to_le64(c->old_idx_sz); + c->mst_node->lpt_lnum = cpu_to_le32(c->lpt_lnum); + c->mst_node->lpt_offs = cpu_to_le32(c->lpt_offs); + c->mst_node->nhead_lnum = cpu_to_le32(c->nhead_lnum); + c->mst_node->nhead_offs = cpu_to_le32(c->nhead_offs); + c->mst_node->ltab_lnum = cpu_to_le32(c->ltab_lnum); + c->mst_node->ltab_offs = cpu_to_le32(c->ltab_offs); + c->mst_node->lsave_lnum = cpu_to_le32(c->lsave_lnum); + c->mst_node->lsave_offs = cpu_to_le32(c->lsave_offs); + c->mst_node->lscan_lnum = cpu_to_le32(c->lscan_lnum); + c->mst_node->empty_lebs = cpu_to_le32(lst.empty_lebs); + c->mst_node->idx_lebs = cpu_to_le32(lst.idx_lebs); + c->mst_node->total_free = cpu_to_le64(lst.total_free); + c->mst_node->total_dirty = cpu_to_le64(lst.total_dirty); + c->mst_node->total_used = cpu_to_le64(lst.total_used); + c->mst_node->total_dead = cpu_to_le64(lst.total_dead); + c->mst_node->total_dark = cpu_to_le64(lst.total_dark); + if (c->no_orphs) + c->mst_node->flags |= cpu_to_le32(UBIFS_MST_NO_ORPHS); + else + c->mst_node->flags &= ~cpu_to_le32(UBIFS_MST_NO_ORPHS); + err = ubifs_write_master(c); + mutex_unlock(&c->mst_mutex); + if (err) + goto out; + + err = ubifs_log_post_commit(c, old_ltail_lnum); + if (err) + goto out; + err = ubifs_gc_end_commit(c); + if (err) + goto out; + err = ubifs_lpt_post_commit(c); + if (err) + goto out; + + spin_lock(&c->cs_lock); + c->cmt_state = COMMIT_RESTING; + wake_up(&c->cmt_wq); + dbg_cmt("commit end"); + spin_unlock(&c->cs_lock); + + return 0; + +out_up: + up_write(&c->commit_sem); +out: + ubifs_err("commit failed, error %d", err); + spin_lock(&c->cs_lock); + c->cmt_state = COMMIT_BROKEN; + wake_up(&c->cmt_wq); + spin_unlock(&c->cs_lock); + ubifs_ro_mode(c, err); + return err; +} + +/** + * run_bg_commit - run background commit if it is needed. + * @c: UBIFS file-system description object + * + * This function runs background commit if it is needed. Returns zero in case + * of success and a negative error code in case of failure. + */ +static int run_bg_commit(struct ubifs_info *c) +{ + spin_lock(&c->cs_lock); + /* + * Run background commit only if background commit was requested or if + * commit is required. + */ + if (c->cmt_state != COMMIT_BACKGROUND && + c->cmt_state != COMMIT_REQUIRED) + goto out; + spin_unlock(&c->cs_lock); + + down_write(&c->commit_sem); + spin_lock(&c->cs_lock); + if (c->cmt_state == COMMIT_REQUIRED) + c->cmt_state = COMMIT_RUNNING_REQUIRED; + else if (c->cmt_state == COMMIT_BACKGROUND) + c->cmt_state = COMMIT_RUNNING_BACKGROUND; + else + goto out_cmt_unlock; + spin_unlock(&c->cs_lock); + + return do_commit(c); + +out_cmt_unlock: + up_write(&c->commit_sem); +out: + spin_unlock(&c->cs_lock); + return 0; +} + +/** + * ubifs_bg_thread - UBIFS background thread function. + * @info: points to the file-system description object + * + * This function implements various file-system background activities: + * o when a write-buffer timer expires it synchronizes the appropriate + * write-buffer; + * o when the journal is about to be full, it starts in-advance commit. + * + * Note, other stuff like background garbage collection may be added here in + * future. + */ +int ubifs_bg_thread(void *info) +{ + int err; + struct ubifs_info *c = info; + + ubifs_msg("background thread \"%s\" started, PID %d", + c->bgt_name, current->pid); + set_freezable(); + + while (1) { + if (kthread_should_stop()) + break; + + if (try_to_freeze()) + continue; + + set_current_state(TASK_INTERRUPTIBLE); + /* Check if there is something to do */ + if (!c->need_bgt) { + /* + * Nothing prevents us from going sleep now and + * be never woken up and block the task which + * could wait in 'kthread_stop()' forever. + */ + if (kthread_should_stop()) + break; + schedule(); + continue; + } else + __set_current_state(TASK_RUNNING); + + c->need_bgt = 0; + err = ubifs_bg_wbufs_sync(c); + if (err) + ubifs_ro_mode(c, err); + + run_bg_commit(c); + cond_resched(); + } + + dbg_msg("background thread \"%s\" stops", c->bgt_name); + return 0; +} + +/** + * ubifs_commit_required - set commit state to "required". + * @c: UBIFS file-system description object + * + * This function is called if a commit is required but cannot be done from the + * calling function, so it is just flagged instead. + */ +void ubifs_commit_required(struct ubifs_info *c) +{ + spin_lock(&c->cs_lock); + switch (c->cmt_state) { + case COMMIT_RESTING: + case COMMIT_BACKGROUND: + dbg_cmt("old: %s, new: %s", dbg_cstate(c->cmt_state), + dbg_cstate(COMMIT_REQUIRED)); + c->cmt_state = COMMIT_REQUIRED; + break; + case COMMIT_RUNNING_BACKGROUND: + dbg_cmt("old: %s, new: %s", dbg_cstate(c->cmt_state), + dbg_cstate(COMMIT_RUNNING_REQUIRED)); + c->cmt_state = COMMIT_RUNNING_REQUIRED; + break; + case COMMIT_REQUIRED: + case COMMIT_RUNNING_REQUIRED: + case COMMIT_BROKEN: + break; + } + spin_unlock(&c->cs_lock); +} + +/** + * ubifs_request_bg_commit - notify the background thread to do a commit. + * @c: UBIFS file-system description object + * + * This function is called if the journal is full enough to make a commit + * worthwhile, so background thread is kicked to start it. + */ +void ubifs_request_bg_commit(struct ubifs_info *c) +{ + spin_lock(&c->cs_lock); + if (c->cmt_state == COMMIT_RESTING) { + dbg_cmt("old: %s, new: %s", dbg_cstate(c->cmt_state), + dbg_cstate(COMMIT_BACKGROUND)); + c->cmt_state = COMMIT_BACKGROUND; + spin_unlock(&c->cs_lock); + ubifs_wake_up_bgt(c); + } else + spin_unlock(&c->cs_lock); +} + +/** + * wait_for_commit - wait for commit. + * @c: UBIFS file-system description object + * + * This function sleeps until the commit operation is no longer running. + */ +static int wait_for_commit(struct ubifs_info *c) +{ + dbg_cmt("pid %d goes sleep", current->pid); + + /* + * The following sleeps if the condition is false, and will be woken + * when the commit ends. It is possible, although very unlikely, that we + * will wake up and see the subsequent commit running, rather than the + * one we were waiting for, and go back to sleep. However, we will be + * woken again, so there is no danger of sleeping forever. + */ + wait_event(c->cmt_wq, c->cmt_state != COMMIT_RUNNING_BACKGROUND && + c->cmt_state != COMMIT_RUNNING_REQUIRED); + dbg_cmt("commit finished, pid %d woke up", current->pid); + return 0; +} + +/** + * ubifs_run_commit - run or wait for commit. + * @c: UBIFS file-system description object + * + * This function runs commit and returns zero in case of success and a negative + * error code in case of failure. + */ +int ubifs_run_commit(struct ubifs_info *c) +{ + int err = 0; + + spin_lock(&c->cs_lock); + if (c->cmt_state == COMMIT_BROKEN) { + err = -EINVAL; + goto out; + } + + if (c->cmt_state == COMMIT_RUNNING_BACKGROUND) + /* + * We set the commit state to 'running required' to indicate + * that we want it to complete as quickly as possible. + */ + c->cmt_state = COMMIT_RUNNING_REQUIRED; + + if (c->cmt_state == COMMIT_RUNNING_REQUIRED) { + spin_unlock(&c->cs_lock); + return wait_for_commit(c); + } + spin_unlock(&c->cs_lock); + + /* Ok, the commit is indeed needed */ + + down_write(&c->commit_sem); + spin_lock(&c->cs_lock); + /* + * Since we unlocked 'c->cs_lock', the state may have changed, so + * re-check it. + */ + if (c->cmt_state == COMMIT_BROKEN) { + err = -EINVAL; + goto out_cmt_unlock; + } + + if (c->cmt_state == COMMIT_RUNNING_BACKGROUND) + c->cmt_state = COMMIT_RUNNING_REQUIRED; + + if (c->cmt_state == COMMIT_RUNNING_REQUIRED) { + up_write(&c->commit_sem); + spin_unlock(&c->cs_lock); + return wait_for_commit(c); + } + c->cmt_state = COMMIT_RUNNING_REQUIRED; + spin_unlock(&c->cs_lock); + + err = do_commit(c); + return err; + +out_cmt_unlock: + up_write(&c->commit_sem); +out: + spin_unlock(&c->cs_lock); + return err; +} + +/** + * ubifs_gc_should_commit - determine if it is time for GC to run commit. + * @c: UBIFS file-system description object + * + * This function is called by garbage collection to determine if commit should + * be run. If commit state is @COMMIT_BACKGROUND, which means that the journal + * is full enough to start commit, this function returns true. It is not + * absolutely necessary to commit yet, but it feels like this should be better + * then to keep doing GC. This function returns %1 if GC has to initiate commit + * and %0 if not. + */ +int ubifs_gc_should_commit(struct ubifs_info *c) +{ + int ret = 0; + + spin_lock(&c->cs_lock); + if (c->cmt_state == COMMIT_BACKGROUND) { + dbg_cmt("commit required now"); + c->cmt_state = COMMIT_REQUIRED; + } else + dbg_cmt("commit not requested"); + if (c->cmt_state == COMMIT_REQUIRED) + ret = 1; + spin_unlock(&c->cs_lock); + return ret; +} + +#ifdef CONFIG_UBIFS_FS_DEBUG + +/** + * struct idx_node - hold index nodes during index tree traversal. + * @list: list + * @iip: index in parent (slot number of this indexing node in the parent + * indexing node) + * @upper_key: all keys in this indexing node have to be less or equivalent to + * this key + * @idx: index node (8-byte aligned because all node structures must be 8-byte + * aligned) + */ +struct idx_node { + struct list_head list; + int iip; + union ubifs_key upper_key; + struct ubifs_idx_node idx __attribute__((aligned(8))); +}; + +/** + * dbg_old_index_check_init - get information for the next old index check. + * @c: UBIFS file-system description object + * @zroot: root of the index + * + * This function records information about the index that will be needed for the + * next old index check i.e. 'dbg_check_old_index()'. + * + * This function returns %0 on success and a negative error code on failure. + */ +int dbg_old_index_check_init(struct ubifs_info *c, struct ubifs_zbranch *zroot) +{ + struct ubifs_idx_node *idx; + int lnum, offs, len, err = 0; + + c->old_zroot = *zroot; + + lnum = c->old_zroot.lnum; + offs = c->old_zroot.offs; + len = c->old_zroot.len; + + idx = kmalloc(c->max_idx_node_sz, GFP_NOFS); + if (!idx) + return -ENOMEM; + + err = ubifs_read_node(c, idx, UBIFS_IDX_NODE, len, lnum, offs); + if (err) + goto out; + + c->old_zroot_level = le16_to_cpu(idx->level); + c->old_zroot_sqnum = le64_to_cpu(idx->ch.sqnum); +out: + kfree(idx); + return err; +} + +/** + * dbg_check_old_index - check the old copy of the index. + * @c: UBIFS file-system description object + * @zroot: root of the new index + * + * In order to be able to recover from an unclean unmount, a complete copy of + * the index must exist on flash. This is the "old" index. The commit process + * must write the "new" index to flash without overwriting or destroying any + * part of the old index. This function is run at commit end in order to check + * that the old index does indeed exist completely intact. + * + * This function returns %0 on success and a negative error code on failure. + */ +int dbg_check_old_index(struct ubifs_info *c, struct ubifs_zbranch *zroot) +{ + int lnum, offs, len, err = 0, uninitialized_var(last_level), child_cnt; + int first = 1, iip; + union ubifs_key lower_key, upper_key, l_key, u_key; + unsigned long long uninitialized_var(last_sqnum); + struct ubifs_idx_node *idx; + struct list_head list; + struct idx_node *i; + size_t sz; + + if (!(ubifs_chk_flags & UBIFS_CHK_OLD_IDX)) + goto out; + + INIT_LIST_HEAD(&list); + + sz = sizeof(struct idx_node) + ubifs_idx_node_sz(c, c->fanout) - + UBIFS_IDX_NODE_SZ; + + /* Start at the old zroot */ + lnum = c->old_zroot.lnum; + offs = c->old_zroot.offs; + len = c->old_zroot.len; + iip = 0; + + /* + * Traverse the index tree preorder depth-first i.e. do a node and then + * its subtrees from left to right. + */ + while (1) { + struct ubifs_branch *br; + + /* Get the next index node */ + i = kmalloc(sz, GFP_NOFS); + if (!i) { + err = -ENOMEM; + goto out_free; + } + i->iip = iip; + /* Keep the index nodes on our path in a linked list */ + list_add_tail(&i->list, &list); + /* Read the index node */ + idx = &i->idx; + err = ubifs_read_node(c, idx, UBIFS_IDX_NODE, len, lnum, offs); + if (err) + goto out_free; + /* Validate index node */ + child_cnt = le16_to_cpu(idx->child_cnt); + if (child_cnt < 1 || child_cnt > c->fanout) { + err = 1; + goto out_dump; + } + if (first) { + first = 0; + /* Check root level and sqnum */ + if (le16_to_cpu(idx->level) != c->old_zroot_level) { + err = 2; + goto out_dump; + } + if (le64_to_cpu(idx->ch.sqnum) != c->old_zroot_sqnum) { + err = 3; + goto out_dump; + } + /* Set last values as though root had a parent */ + last_level = le16_to_cpu(idx->level) + 1; + last_sqnum = le64_to_cpu(idx->ch.sqnum) + 1; + key_read(c, ubifs_idx_key(c, idx), &lower_key); + highest_ino_key(c, &upper_key, INUM_WATERMARK); + } + key_copy(c, &upper_key, &i->upper_key); + if (le16_to_cpu(idx->level) != last_level - 1) { + err = 3; + goto out_dump; + } + /* + * The index is always written bottom up hence a child's sqnum + * is always less than the parents. + */ + if (le64_to_cpu(idx->ch.sqnum) >= last_sqnum) { + err = 4; + goto out_dump; + } + /* Check key range */ + key_read(c, ubifs_idx_key(c, idx), &l_key); + br = ubifs_idx_branch(c, idx, child_cnt - 1); + key_read(c, &br->key, &u_key); + if (keys_cmp(c, &lower_key, &l_key) > 0) { + err = 5; + goto out_dump; + } + if (keys_cmp(c, &upper_key, &u_key) < 0) { + err = 6; + goto out_dump; + } + if (keys_cmp(c, &upper_key, &u_key) == 0) + if (!is_hash_key(c, &u_key)) { + err = 7; + goto out_dump; + } + /* Go to next index node */ + if (le16_to_cpu(idx->level) == 0) { + /* At the bottom, so go up until can go right */ + while (1) { + /* Drop the bottom of the list */ + list_del(&i->list); + kfree(i); + /* No more list means we are done */ + if (list_empty(&list)) + goto out; + /* Look at the new bottom */ + i = list_entry(list.prev, struct idx_node, + list); + idx = &i->idx; + /* Can we go right */ + if (iip + 1 < le16_to_cpu(idx->child_cnt)) { + iip = iip + 1; + break; + } else + /* Nope, so go up again */ + iip = i->iip; + } + } else + /* Go down left */ + iip = 0; + /* + * We have the parent in 'idx' and now we set up for reading the + * child pointed to by slot 'iip'. + */ + last_level = le16_to_cpu(idx->level); + last_sqnum = le64_to_cpu(idx->ch.sqnum); + br = ubifs_idx_branch(c, idx, iip); + lnum = le32_to_cpu(br->lnum); + offs = le32_to_cpu(br->offs); + len = le32_to_cpu(br->len); + key_read(c, &br->key, &lower_key); + if (iip + 1 < le16_to_cpu(idx->child_cnt)) { + br = ubifs_idx_branch(c, idx, iip + 1); + key_read(c, &br->key, &upper_key); + } else + key_copy(c, &i->upper_key, &upper_key); + } +out: + err = dbg_old_index_check_init(c, zroot); + if (err) + goto out_free; + + return 0; + +out_dump: + dbg_err("dumping index node (iip=%d)", i->iip); + dbg_dump_node(c, idx); + list_del(&i->list); + kfree(i); + if (!list_empty(&list)) { + i = list_entry(list.prev, struct idx_node, list); + dbg_err("dumping parent index node"); + dbg_dump_node(c, &i->idx); + } +out_free: + while (!list_empty(&list)) { + i = list_entry(list.next, struct idx_node, list); + list_del(&i->list); + kfree(i); + } + ubifs_err("failed, error %d", err); + if (err > 0) + err = -EINVAL; + return err; +} + +#endif /* CONFIG_UBIFS_FS_DEBUG */ diff --git a/fs/ubifs/compress.c b/fs/ubifs/compress.c new file mode 100644 index 000000000000..5bb51dac3c16 --- /dev/null +++ b/fs/ubifs/compress.c @@ -0,0 +1,253 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * Copyright (C) 2006, 2007 University of Szeged, Hungary + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Adrian Hunter + * Artem Bityutskiy (Битюцкий Артём) + * Zoltan Sogor + */ + +/* + * This file provides a single place to access to compression and + * decompression. + */ + +#include +#include "ubifs.h" + +/* Fake description object for the "none" compressor */ +static struct ubifs_compressor none_compr = { + .compr_type = UBIFS_COMPR_NONE, + .name = "no compression", + .capi_name = "", +}; + +#ifdef CONFIG_UBIFS_FS_LZO +static DEFINE_MUTEX(lzo_mutex); + +static struct ubifs_compressor lzo_compr = { + .compr_type = UBIFS_COMPR_LZO, + .comp_mutex = &lzo_mutex, + .name = "LZO", + .capi_name = "lzo", +}; +#else +static struct ubifs_compressor lzo_compr = { + .compr_type = UBIFS_COMPR_LZO, + .name = "LZO", +}; +#endif + +#ifdef CONFIG_UBIFS_FS_ZLIB +static DEFINE_MUTEX(deflate_mutex); +static DEFINE_MUTEX(inflate_mutex); + +static struct ubifs_compressor zlib_compr = { + .compr_type = UBIFS_COMPR_ZLIB, + .comp_mutex = &deflate_mutex, + .decomp_mutex = &inflate_mutex, + .name = "zlib", + .capi_name = "deflate", +}; +#else +static struct ubifs_compressor zlib_compr = { + .compr_type = UBIFS_COMPR_ZLIB, + .name = "zlib", +}; +#endif + +/* All UBIFS compressors */ +struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT]; + +/** + * ubifs_compress - compress data. + * @in_buf: data to compress + * @in_len: length of the data to compress + * @out_buf: output buffer where compressed data should be stored + * @out_len: output buffer length is returned here + * @compr_type: type of compression to use on enter, actually used compression + * type on exit + * + * This function compresses input buffer @in_buf of length @in_len and stores + * the result in the output buffer @out_buf and the resulting length in + * @out_len. If the input buffer does not compress, it is just copied to the + * @out_buf. The same happens if @compr_type is %UBIFS_COMPR_NONE or if + * compression error occurred. + * + * Note, if the input buffer was not compressed, it is copied to the output + * buffer and %UBIFS_COMPR_NONE is returned in @compr_type. + * + * This functions returns %0 on success or a negative error code on failure. + */ +void ubifs_compress(const void *in_buf, int in_len, void *out_buf, int *out_len, + int *compr_type) +{ + int err; + struct ubifs_compressor *compr = ubifs_compressors[*compr_type]; + + if (*compr_type == UBIFS_COMPR_NONE) + goto no_compr; + + /* If the input data is small, do not even try to compress it */ + if (in_len < UBIFS_MIN_COMPR_LEN) + goto no_compr; + + if (compr->comp_mutex) + mutex_lock(compr->comp_mutex); + err = crypto_comp_compress(compr->cc, in_buf, in_len, out_buf, + out_len); + if (compr->comp_mutex) + mutex_unlock(compr->comp_mutex); + if (unlikely(err)) { + ubifs_warn("cannot compress %d bytes, compressor %s, " + "error %d, leave data uncompressed", + in_len, compr->name, err); + goto no_compr; + } + + /* + * Presently, we just require that compression results in less data, + * rather than any defined minimum compression ratio or amount. + */ + if (ALIGN(*out_len, 8) >= ALIGN(in_len, 8)) + goto no_compr; + + return; + +no_compr: + memcpy(out_buf, in_buf, in_len); + *out_len = in_len; + *compr_type = UBIFS_COMPR_NONE; +} + +/** + * ubifs_decompress - decompress data. + * @in_buf: data to decompress + * @in_len: length of the data to decompress + * @out_buf: output buffer where decompressed data should + * @out_len: output length is returned here + * @compr_type: type of compression + * + * This function decompresses data from buffer @in_buf into buffer @out_buf. + * The length of the uncompressed data is returned in @out_len. This functions + * returns %0 on success or a negative error code on failure. + */ +int ubifs_decompress(const void *in_buf, int in_len, void *out_buf, + int *out_len, int compr_type) +{ + int err; + struct ubifs_compressor *compr; + + if (unlikely(compr_type < 0 || compr_type >= UBIFS_COMPR_TYPES_CNT)) { + ubifs_err("invalid compression type %d", compr_type); + return -EINVAL; + } + + compr = ubifs_compressors[compr_type]; + + if (unlikely(!compr->capi_name)) { + ubifs_err("%s compression is not compiled in", compr->name); + return -EINVAL; + } + + if (compr_type == UBIFS_COMPR_NONE) { + memcpy(out_buf, in_buf, in_len); + *out_len = in_len; + return 0; + } + + if (compr->decomp_mutex) + mutex_lock(compr->decomp_mutex); + err = crypto_comp_decompress(compr->cc, in_buf, in_len, out_buf, + out_len); + if (compr->decomp_mutex) + mutex_unlock(compr->decomp_mutex); + if (err) + ubifs_err("cannot decompress %d bytes, compressor %s, " + "error %d", in_len, compr->name, err); + + return err; +} + +/** + * compr_init - initialize a compressor. + * @compr: compressor description object + * + * This function initializes the requested compressor and returns zero in case + * of success or a negative error code in case of failure. + */ +static int __init compr_init(struct ubifs_compressor *compr) +{ + if (compr->capi_name) { + compr->cc = crypto_alloc_comp(compr->capi_name, 0, 0); + if (IS_ERR(compr->cc)) { + ubifs_err("cannot initialize compressor %s, error %ld", + compr->name, PTR_ERR(compr->cc)); + return PTR_ERR(compr->cc); + } + } + + ubifs_compressors[compr->compr_type] = compr; + return 0; +} + +/** + * compr_exit - de-initialize a compressor. + * @compr: compressor description object + */ +static void compr_exit(struct ubifs_compressor *compr) +{ + if (compr->capi_name) + crypto_free_comp(compr->cc); + return; +} + +/** + * ubifs_compressors_init - initialize UBIFS compressors. + * + * This function initializes the compressor which were compiled in. Returns + * zero in case of success and a negative error code in case of failure. + */ +int __init ubifs_compressors_init(void) +{ + int err; + + err = compr_init(&lzo_compr); + if (err) + return err; + + err = compr_init(&zlib_compr); + if (err) + goto out_lzo; + + ubifs_compressors[UBIFS_COMPR_NONE] = &none_compr; + return 0; + +out_lzo: + compr_exit(&lzo_compr); + return err; +} + +/** + * ubifs_compressors_exit - de-initialize UBIFS compressors. + */ +void __exit ubifs_compressors_exit(void) +{ + compr_exit(&lzo_compr); + compr_exit(&zlib_compr); +} diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c new file mode 100644 index 000000000000..4e3aaeba4eca --- /dev/null +++ b/fs/ubifs/debug.c @@ -0,0 +1,2289 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* + * This file implements most of the debugging stuff which is compiled in only + * when it is enabled. But some debugging check functions are implemented in + * corresponding subsystem, just because they are closely related and utilize + * various local functions of those subsystems. + */ + +#define UBIFS_DBG_PRESERVE_UBI + +#include "ubifs.h" +#include +#include + +#ifdef CONFIG_UBIFS_FS_DEBUG + +DEFINE_SPINLOCK(dbg_lock); + +static char dbg_key_buf0[128]; +static char dbg_key_buf1[128]; + +unsigned int ubifs_msg_flags = UBIFS_MSG_FLAGS_DEFAULT; +unsigned int ubifs_chk_flags = UBIFS_CHK_FLAGS_DEFAULT; +unsigned int ubifs_tst_flags; + +module_param_named(debug_msgs, ubifs_msg_flags, uint, S_IRUGO | S_IWUSR); +module_param_named(debug_chks, ubifs_chk_flags, uint, S_IRUGO | S_IWUSR); +module_param_named(debug_tsts, ubifs_tst_flags, uint, S_IRUGO | S_IWUSR); + +MODULE_PARM_DESC(debug_msgs, "Debug message type flags"); +MODULE_PARM_DESC(debug_chks, "Debug check flags"); +MODULE_PARM_DESC(debug_tsts, "Debug special test flags"); + +static const char *get_key_fmt(int fmt) +{ + switch (fmt) { + case UBIFS_SIMPLE_KEY_FMT: + return "simple"; + default: + return "unknown/invalid format"; + } +} + +static const char *get_key_hash(int hash) +{ + switch (hash) { + case UBIFS_KEY_HASH_R5: + return "R5"; + case UBIFS_KEY_HASH_TEST: + return "test"; + default: + return "unknown/invalid name hash"; + } +} + +static const char *get_key_type(int type) +{ + switch (type) { + case UBIFS_INO_KEY: + return "inode"; + case UBIFS_DENT_KEY: + return "direntry"; + case UBIFS_XENT_KEY: + return "xentry"; + case UBIFS_DATA_KEY: + return "data"; + case UBIFS_TRUN_KEY: + return "truncate"; + default: + return "unknown/invalid key"; + } +} + +static void sprintf_key(const struct ubifs_info *c, const union ubifs_key *key, + char *buffer) +{ + char *p = buffer; + int type = key_type(c, key); + + if (c->key_fmt == UBIFS_SIMPLE_KEY_FMT) { + switch (type) { + case UBIFS_INO_KEY: + sprintf(p, "(%lu, %s)", key_inum(c, key), + get_key_type(type)); + break; + case UBIFS_DENT_KEY: + case UBIFS_XENT_KEY: + sprintf(p, "(%lu, %s, %#08x)", key_inum(c, key), + get_key_type(type), key_hash(c, key)); + break; + case UBIFS_DATA_KEY: + sprintf(p, "(%lu, %s, %u)", key_inum(c, key), + get_key_type(type), key_block(c, key)); + break; + case UBIFS_TRUN_KEY: + sprintf(p, "(%lu, %s)", + key_inum(c, key), get_key_type(type)); + break; + default: + sprintf(p, "(bad key type: %#08x, %#08x)", + key->u32[0], key->u32[1]); + } + } else + sprintf(p, "bad key format %d", c->key_fmt); +} + +const char *dbg_key_str0(const struct ubifs_info *c, const union ubifs_key *key) +{ + /* dbg_lock must be held */ + sprintf_key(c, key, dbg_key_buf0); + return dbg_key_buf0; +} + +const char *dbg_key_str1(const struct ubifs_info *c, const union ubifs_key *key) +{ + /* dbg_lock must be held */ + sprintf_key(c, key, dbg_key_buf1); + return dbg_key_buf1; +} + +const char *dbg_ntype(int type) +{ + switch (type) { + case UBIFS_PAD_NODE: + return "padding node"; + case UBIFS_SB_NODE: + return "superblock node"; + case UBIFS_MST_NODE: + return "master node"; + case UBIFS_REF_NODE: + return "reference node"; + case UBIFS_INO_NODE: + return "inode node"; + case UBIFS_DENT_NODE: + return "direntry node"; + case UBIFS_XENT_NODE: + return "xentry node"; + case UBIFS_DATA_NODE: + return "data node"; + case UBIFS_TRUN_NODE: + return "truncate node"; + case UBIFS_IDX_NODE: + return "indexing node"; + case UBIFS_CS_NODE: + return "commit start node"; + case UBIFS_ORPH_NODE: + return "orphan node"; + default: + return "unknown node"; + } +} + +static const char *dbg_gtype(int type) +{ + switch (type) { + case UBIFS_NO_NODE_GROUP: + return "no node group"; + case UBIFS_IN_NODE_GROUP: + return "in node group"; + case UBIFS_LAST_OF_NODE_GROUP: + return "last of node group"; + default: + return "unknown"; + } +} + +const char *dbg_cstate(int cmt_state) +{ + switch (cmt_state) { + case COMMIT_RESTING: + return "commit resting"; + case COMMIT_BACKGROUND: + return "background commit requested"; + case COMMIT_REQUIRED: + return "commit required"; + case COMMIT_RUNNING_BACKGROUND: + return "BACKGROUND commit running"; + case COMMIT_RUNNING_REQUIRED: + return "commit running and required"; + case COMMIT_BROKEN: + return "broken commit"; + default: + return "unknown commit state"; + } +} + +static void dump_ch(const struct ubifs_ch *ch) +{ + printk(KERN_DEBUG "\tmagic %#x\n", le32_to_cpu(ch->magic)); + printk(KERN_DEBUG "\tcrc %#x\n", le32_to_cpu(ch->crc)); + printk(KERN_DEBUG "\tnode_type %d (%s)\n", ch->node_type, + dbg_ntype(ch->node_type)); + printk(KERN_DEBUG "\tgroup_type %d (%s)\n", ch->group_type, + dbg_gtype(ch->group_type)); + printk(KERN_DEBUG "\tsqnum %llu\n", + (unsigned long long)le64_to_cpu(ch->sqnum)); + printk(KERN_DEBUG "\tlen %u\n", le32_to_cpu(ch->len)); +} + +void dbg_dump_inode(const struct ubifs_info *c, const struct inode *inode) +{ + const struct ubifs_inode *ui = ubifs_inode(inode); + + printk(KERN_DEBUG "inode %lu\n", inode->i_ino); + printk(KERN_DEBUG "size %llu\n", + (unsigned long long)i_size_read(inode)); + printk(KERN_DEBUG "nlink %u\n", inode->i_nlink); + printk(KERN_DEBUG "uid %u\n", (unsigned int)inode->i_uid); + printk(KERN_DEBUG "gid %u\n", (unsigned int)inode->i_gid); + printk(KERN_DEBUG "atime %u.%u\n", + (unsigned int)inode->i_atime.tv_sec, + (unsigned int)inode->i_atime.tv_nsec); + printk(KERN_DEBUG "mtime %u.%u\n", + (unsigned int)inode->i_mtime.tv_sec, + (unsigned int)inode->i_mtime.tv_nsec); + printk(KERN_DEBUG "ctime %u.%u\n", + (unsigned int)inode->i_ctime.tv_sec, + (unsigned int)inode->i_ctime.tv_nsec); + printk(KERN_DEBUG "creat_sqnum %llu\n", ui->creat_sqnum); + printk(KERN_DEBUG "xattr_size %u\n", ui->xattr_size); + printk(KERN_DEBUG "xattr_cnt %u\n", ui->xattr_cnt); + printk(KERN_DEBUG "xattr_names %u\n", ui->xattr_names); + printk(KERN_DEBUG "dirty %u\n", ui->dirty); + printk(KERN_DEBUG "xattr %u\n", ui->xattr); + printk(KERN_DEBUG "flags %d\n", ui->flags); + printk(KERN_DEBUG "compr_type %d\n", ui->compr_type); + printk(KERN_DEBUG "data_len %d\n", ui->data_len); +} + +void dbg_dump_node(const struct ubifs_info *c, const void *node) +{ + int i, n; + union ubifs_key key; + const struct ubifs_ch *ch = node; + + if (dbg_failure_mode) + return; + + /* If the magic is incorrect, just hexdump the first bytes */ + if (le32_to_cpu(ch->magic) != UBIFS_NODE_MAGIC) { + printk(KERN_DEBUG "Not a node, first %zu bytes:", UBIFS_CH_SZ); + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1, + (void *)node, UBIFS_CH_SZ, 1); + return; + } + + spin_lock(&dbg_lock); + dump_ch(node); + + switch (ch->node_type) { + case UBIFS_PAD_NODE: + { + const struct ubifs_pad_node *pad = node; + + printk(KERN_DEBUG "\tpad_len %u\n", + le32_to_cpu(pad->pad_len)); + break; + } + case UBIFS_SB_NODE: + { + const struct ubifs_sb_node *sup = node; + unsigned int sup_flags = le32_to_cpu(sup->flags); + + printk(KERN_DEBUG "\tkey_hash %d (%s)\n", + (int)sup->key_hash, get_key_hash(sup->key_hash)); + printk(KERN_DEBUG "\tkey_fmt %d (%s)\n", + (int)sup->key_fmt, get_key_fmt(sup->key_fmt)); + printk(KERN_DEBUG "\tflags %#x\n", sup_flags); + printk(KERN_DEBUG "\t big_lpt %u\n", + !!(sup_flags & UBIFS_FLG_BIGLPT)); + printk(KERN_DEBUG "\tmin_io_size %u\n", + le32_to_cpu(sup->min_io_size)); + printk(KERN_DEBUG "\tleb_size %u\n", + le32_to_cpu(sup->leb_size)); + printk(KERN_DEBUG "\tleb_cnt %u\n", + le32_to_cpu(sup->leb_cnt)); + printk(KERN_DEBUG "\tmax_leb_cnt %u\n", + le32_to_cpu(sup->max_leb_cnt)); + printk(KERN_DEBUG "\tmax_bud_bytes %llu\n", + (unsigned long long)le64_to_cpu(sup->max_bud_bytes)); + printk(KERN_DEBUG "\tlog_lebs %u\n", + le32_to_cpu(sup->log_lebs)); + printk(KERN_DEBUG "\tlpt_lebs %u\n", + le32_to_cpu(sup->lpt_lebs)); + printk(KERN_DEBUG "\torph_lebs %u\n", + le32_to_cpu(sup->orph_lebs)); + printk(KERN_DEBUG "\tjhead_cnt %u\n", + le32_to_cpu(sup->jhead_cnt)); + printk(KERN_DEBUG "\tfanout %u\n", + le32_to_cpu(sup->fanout)); + printk(KERN_DEBUG "\tlsave_cnt %u\n", + le32_to_cpu(sup->lsave_cnt)); + printk(KERN_DEBUG "\tdefault_compr %u\n", + (int)le16_to_cpu(sup->default_compr)); + printk(KERN_DEBUG "\trp_size %llu\n", + (unsigned long long)le64_to_cpu(sup->rp_size)); + printk(KERN_DEBUG "\trp_uid %u\n", + le32_to_cpu(sup->rp_uid)); + printk(KERN_DEBUG "\trp_gid %u\n", + le32_to_cpu(sup->rp_gid)); + printk(KERN_DEBUG "\tfmt_version %u\n", + le32_to_cpu(sup->fmt_version)); + printk(KERN_DEBUG "\ttime_gran %u\n", + le32_to_cpu(sup->time_gran)); + printk(KERN_DEBUG "\tUUID %02X%02X%02X%02X-%02X%02X" + "-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X\n", + sup->uuid[0], sup->uuid[1], sup->uuid[2], sup->uuid[3], + sup->uuid[4], sup->uuid[5], sup->uuid[6], sup->uuid[7], + sup->uuid[8], sup->uuid[9], sup->uuid[10], sup->uuid[11], + sup->uuid[12], sup->uuid[13], sup->uuid[14], + sup->uuid[15]); + break; + } + case UBIFS_MST_NODE: + { + const struct ubifs_mst_node *mst = node; + + printk(KERN_DEBUG "\thighest_inum %llu\n", + (unsigned long long)le64_to_cpu(mst->highest_inum)); + printk(KERN_DEBUG "\tcommit number %llu\n", + (unsigned long long)le64_to_cpu(mst->cmt_no)); + printk(KERN_DEBUG "\tflags %#x\n", + le32_to_cpu(mst->flags)); + printk(KERN_DEBUG "\tlog_lnum %u\n", + le32_to_cpu(mst->log_lnum)); + printk(KERN_DEBUG "\troot_lnum %u\n", + le32_to_cpu(mst->root_lnum)); + printk(KERN_DEBUG "\troot_offs %u\n", + le32_to_cpu(mst->root_offs)); + printk(KERN_DEBUG "\troot_len %u\n", + le32_to_cpu(mst->root_len)); + printk(KERN_DEBUG "\tgc_lnum %u\n", + le32_to_cpu(mst->gc_lnum)); + printk(KERN_DEBUG "\tihead_lnum %u\n", + le32_to_cpu(mst->ihead_lnum)); + printk(KERN_DEBUG "\tihead_offs %u\n", + le32_to_cpu(mst->ihead_offs)); + printk(KERN_DEBUG "\tindex_size %u\n", + le32_to_cpu(mst->index_size)); + printk(KERN_DEBUG "\tlpt_lnum %u\n", + le32_to_cpu(mst->lpt_lnum)); + printk(KERN_DEBUG "\tlpt_offs %u\n", + le32_to_cpu(mst->lpt_offs)); + printk(KERN_DEBUG "\tnhead_lnum %u\n", + le32_to_cpu(mst->nhead_lnum)); + printk(KERN_DEBUG "\tnhead_offs %u\n", + le32_to_cpu(mst->nhead_offs)); + printk(KERN_DEBUG "\tltab_lnum %u\n", + le32_to_cpu(mst->ltab_lnum)); + printk(KERN_DEBUG "\tltab_offs %u\n", + le32_to_cpu(mst->ltab_offs)); + printk(KERN_DEBUG "\tlsave_lnum %u\n", + le32_to_cpu(mst->lsave_lnum)); + printk(KERN_DEBUG "\tlsave_offs %u\n", + le32_to_cpu(mst->lsave_offs)); + printk(KERN_DEBUG "\tlscan_lnum %u\n", + le32_to_cpu(mst->lscan_lnum)); + printk(KERN_DEBUG "\tleb_cnt %u\n", + le32_to_cpu(mst->leb_cnt)); + printk(KERN_DEBUG "\tempty_lebs %u\n", + le32_to_cpu(mst->empty_lebs)); + printk(KERN_DEBUG "\tidx_lebs %u\n", + le32_to_cpu(mst->idx_lebs)); + printk(KERN_DEBUG "\ttotal_free %llu\n", + (unsigned long long)le64_to_cpu(mst->total_free)); + printk(KERN_DEBUG "\ttotal_dirty %llu\n", + (unsigned long long)le64_to_cpu(mst->total_dirty)); + printk(KERN_DEBUG "\ttotal_used %llu\n", + (unsigned long long)le64_to_cpu(mst->total_used)); + printk(KERN_DEBUG "\ttotal_dead %llu\n", + (unsigned long long)le64_to_cpu(mst->total_dead)); + printk(KERN_DEBUG "\ttotal_dark %llu\n", + (unsigned long long)le64_to_cpu(mst->total_dark)); + break; + } + case UBIFS_REF_NODE: + { + const struct ubifs_ref_node *ref = node; + + printk(KERN_DEBUG "\tlnum %u\n", + le32_to_cpu(ref->lnum)); + printk(KERN_DEBUG "\toffs %u\n", + le32_to_cpu(ref->offs)); + printk(KERN_DEBUG "\tjhead %u\n", + le32_to_cpu(ref->jhead)); + break; + } + case UBIFS_INO_NODE: + { + const struct ubifs_ino_node *ino = node; + + key_read(c, &ino->key, &key); + printk(KERN_DEBUG "\tkey %s\n", DBGKEY(&key)); + printk(KERN_DEBUG "\tcreat_sqnum %llu\n", + (unsigned long long)le64_to_cpu(ino->creat_sqnum)); + printk(KERN_DEBUG "\tsize %llu\n", + (unsigned long long)le64_to_cpu(ino->size)); + printk(KERN_DEBUG "\tnlink %u\n", + le32_to_cpu(ino->nlink)); + printk(KERN_DEBUG "\tatime %lld.%u\n", + (long long)le64_to_cpu(ino->atime_sec), + le32_to_cpu(ino->atime_nsec)); + printk(KERN_DEBUG "\tmtime %lld.%u\n", + (long long)le64_to_cpu(ino->mtime_sec), + le32_to_cpu(ino->mtime_nsec)); + printk(KERN_DEBUG "\tctime %lld.%u\n", + (long long)le64_to_cpu(ino->ctime_sec), + le32_to_cpu(ino->ctime_nsec)); + printk(KERN_DEBUG "\tuid %u\n", + le32_to_cpu(ino->uid)); + printk(KERN_DEBUG "\tgid %u\n", + le32_to_cpu(ino->gid)); + printk(KERN_DEBUG "\tmode %u\n", + le32_to_cpu(ino->mode)); + printk(KERN_DEBUG "\tflags %#x\n", + le32_to_cpu(ino->flags)); + printk(KERN_DEBUG "\txattr_cnt %u\n", + le32_to_cpu(ino->xattr_cnt)); + printk(KERN_DEBUG "\txattr_size %u\n", + le32_to_cpu(ino->xattr_size)); + printk(KERN_DEBUG "\txattr_names %u\n", + le32_to_cpu(ino->xattr_names)); + printk(KERN_DEBUG "\tcompr_type %#x\n", + (int)le16_to_cpu(ino->compr_type)); + printk(KERN_DEBUG "\tdata len %u\n", + le32_to_cpu(ino->data_len)); + break; + } + case UBIFS_DENT_NODE: + case UBIFS_XENT_NODE: + { + const struct ubifs_dent_node *dent = node; + int nlen = le16_to_cpu(dent->nlen); + + key_read(c, &dent->key, &key); + printk(KERN_DEBUG "\tkey %s\n", DBGKEY(&key)); + printk(KERN_DEBUG "\tinum %llu\n", + (unsigned long long)le64_to_cpu(dent->inum)); + printk(KERN_DEBUG "\ttype %d\n", (int)dent->type); + printk(KERN_DEBUG "\tnlen %d\n", nlen); + printk(KERN_DEBUG "\tname "); + + if (nlen > UBIFS_MAX_NLEN) + printk(KERN_DEBUG "(bad name length, not printing, " + "bad or corrupted node)"); + else { + for (i = 0; i < nlen && dent->name[i]; i++) + printk("%c", dent->name[i]); + } + printk("\n"); + + break; + } + case UBIFS_DATA_NODE: + { + const struct ubifs_data_node *dn = node; + int dlen = le32_to_cpu(ch->len) - UBIFS_DATA_NODE_SZ; + + key_read(c, &dn->key, &key); + printk(KERN_DEBUG "\tkey %s\n", DBGKEY(&key)); + printk(KERN_DEBUG "\tsize %u\n", + le32_to_cpu(dn->size)); + printk(KERN_DEBUG "\tcompr_typ %d\n", + (int)le16_to_cpu(dn->compr_type)); + printk(KERN_DEBUG "\tdata size %d\n", + dlen); + printk(KERN_DEBUG "\tdata:\n"); + print_hex_dump(KERN_DEBUG, "\t", DUMP_PREFIX_OFFSET, 32, 1, + (void *)&dn->data, dlen, 0); + break; + } + case UBIFS_TRUN_NODE: + { + const struct ubifs_trun_node *trun = node; + + printk(KERN_DEBUG "\tinum %u\n", + le32_to_cpu(trun->inum)); + printk(KERN_DEBUG "\told_size %llu\n", + (unsigned long long)le64_to_cpu(trun->old_size)); + printk(KERN_DEBUG "\tnew_size %llu\n", + (unsigned long long)le64_to_cpu(trun->new_size)); + break; + } + case UBIFS_IDX_NODE: + { + const struct ubifs_idx_node *idx = node; + + n = le16_to_cpu(idx->child_cnt); + printk(KERN_DEBUG "\tchild_cnt %d\n", n); + printk(KERN_DEBUG "\tlevel %d\n", + (int)le16_to_cpu(idx->level)); + printk(KERN_DEBUG "\tBranches:\n"); + + for (i = 0; i < n && i < c->fanout - 1; i++) { + const struct ubifs_branch *br; + + br = ubifs_idx_branch(c, idx, i); + key_read(c, &br->key, &key); + printk(KERN_DEBUG "\t%d: LEB %d:%d len %d key %s\n", + i, le32_to_cpu(br->lnum), le32_to_cpu(br->offs), + le32_to_cpu(br->len), DBGKEY(&key)); + } + break; + } + case UBIFS_CS_NODE: + break; + case UBIFS_ORPH_NODE: + { + const struct ubifs_orph_node *orph = node; + + printk(KERN_DEBUG "\tcommit number %llu\n", + (unsigned long long) + le64_to_cpu(orph->cmt_no) & LLONG_MAX); + printk(KERN_DEBUG "\tlast node flag %llu\n", + (unsigned long long)(le64_to_cpu(orph->cmt_no)) >> 63); + n = (le32_to_cpu(ch->len) - UBIFS_ORPH_NODE_SZ) >> 3; + printk(KERN_DEBUG "\t%d orphan inode numbers:\n", n); + for (i = 0; i < n; i++) + printk(KERN_DEBUG "\t ino %llu\n", + le64_to_cpu(orph->inos[i])); + break; + } + default: + printk(KERN_DEBUG "node type %d was not recognized\n", + (int)ch->node_type); + } + spin_unlock(&dbg_lock); +} + +void dbg_dump_budget_req(const struct ubifs_budget_req *req) +{ + spin_lock(&dbg_lock); + printk(KERN_DEBUG "Budgeting request: new_ino %d, dirtied_ino %d\n", + req->new_ino, req->dirtied_ino); + printk(KERN_DEBUG "\tnew_ino_d %d, dirtied_ino_d %d\n", + req->new_ino_d, req->dirtied_ino_d); + printk(KERN_DEBUG "\tnew_page %d, dirtied_page %d\n", + req->new_page, req->dirtied_page); + printk(KERN_DEBUG "\tnew_dent %d, mod_dent %d\n", + req->new_dent, req->mod_dent); + printk(KERN_DEBUG "\tidx_growth %d\n", req->idx_growth); + printk(KERN_DEBUG "\tdata_growth %d dd_growth %d\n", + req->data_growth, req->dd_growth); + spin_unlock(&dbg_lock); +} + +void dbg_dump_lstats(const struct ubifs_lp_stats *lst) +{ + spin_lock(&dbg_lock); + printk(KERN_DEBUG "Lprops statistics: empty_lebs %d, idx_lebs %d\n", + lst->empty_lebs, lst->idx_lebs); + printk(KERN_DEBUG "\ttaken_empty_lebs %d, total_free %lld, " + "total_dirty %lld\n", lst->taken_empty_lebs, lst->total_free, + lst->total_dirty); + printk(KERN_DEBUG "\ttotal_used %lld, total_dark %lld, " + "total_dead %lld\n", lst->total_used, lst->total_dark, + lst->total_dead); + spin_unlock(&dbg_lock); +} + +void dbg_dump_budg(struct ubifs_info *c) +{ + int i; + struct rb_node *rb; + struct ubifs_bud *bud; + struct ubifs_gced_idx_leb *idx_gc; + + spin_lock(&dbg_lock); + printk(KERN_DEBUG "Budgeting info: budg_data_growth %lld, " + "budg_dd_growth %lld, budg_idx_growth %lld\n", + c->budg_data_growth, c->budg_dd_growth, c->budg_idx_growth); + printk(KERN_DEBUG "\tdata budget sum %lld, total budget sum %lld, " + "freeable_cnt %d\n", c->budg_data_growth + c->budg_dd_growth, + c->budg_data_growth + c->budg_dd_growth + c->budg_idx_growth, + c->freeable_cnt); + printk(KERN_DEBUG "\tmin_idx_lebs %d, old_idx_sz %lld, " + "calc_idx_sz %lld, idx_gc_cnt %d\n", c->min_idx_lebs, + c->old_idx_sz, c->calc_idx_sz, c->idx_gc_cnt); + printk(KERN_DEBUG "\tdirty_pg_cnt %ld, dirty_zn_cnt %ld, " + "clean_zn_cnt %ld\n", atomic_long_read(&c->dirty_pg_cnt), + atomic_long_read(&c->dirty_zn_cnt), + atomic_long_read(&c->clean_zn_cnt)); + printk(KERN_DEBUG "\tdark_wm %d, dead_wm %d, max_idx_node_sz %d\n", + c->dark_wm, c->dead_wm, c->max_idx_node_sz); + printk(KERN_DEBUG "\tgc_lnum %d, ihead_lnum %d\n", + c->gc_lnum, c->ihead_lnum); + for (i = 0; i < c->jhead_cnt; i++) + printk(KERN_DEBUG "\tjhead %d\t LEB %d\n", + c->jheads[i].wbuf.jhead, c->jheads[i].wbuf.lnum); + for (rb = rb_first(&c->buds); rb; rb = rb_next(rb)) { + bud = rb_entry(rb, struct ubifs_bud, rb); + printk(KERN_DEBUG "\tbud LEB %d\n", bud->lnum); + } + list_for_each_entry(bud, &c->old_buds, list) + printk(KERN_DEBUG "\told bud LEB %d\n", bud->lnum); + list_for_each_entry(idx_gc, &c->idx_gc, list) + printk(KERN_DEBUG "\tGC'ed idx LEB %d unmap %d\n", + idx_gc->lnum, idx_gc->unmap); + printk(KERN_DEBUG "\tcommit state %d\n", c->cmt_state); + spin_unlock(&dbg_lock); +} + +void dbg_dump_lprop(const struct ubifs_info *c, const struct ubifs_lprops *lp) +{ + printk(KERN_DEBUG "LEB %d lprops: free %d, dirty %d (used %d), " + "flags %#x\n", lp->lnum, lp->free, lp->dirty, + c->leb_size - lp->free - lp->dirty, lp->flags); +} + +void dbg_dump_lprops(struct ubifs_info *c) +{ + int lnum, err; + struct ubifs_lprops lp; + struct ubifs_lp_stats lst; + + printk(KERN_DEBUG "Dumping LEB properties\n"); + ubifs_get_lp_stats(c, &lst); + dbg_dump_lstats(&lst); + + for (lnum = c->main_first; lnum < c->leb_cnt; lnum++) { + err = ubifs_read_one_lp(c, lnum, &lp); + if (err) + ubifs_err("cannot read lprops for LEB %d", lnum); + + dbg_dump_lprop(c, &lp); + } +} + +void dbg_dump_leb(const struct ubifs_info *c, int lnum) +{ + struct ubifs_scan_leb *sleb; + struct ubifs_scan_node *snod; + + if (dbg_failure_mode) + return; + + printk(KERN_DEBUG "Dumping LEB %d\n", lnum); + + sleb = ubifs_scan(c, lnum, 0, c->dbg_buf); + if (IS_ERR(sleb)) { + ubifs_err("scan error %d", (int)PTR_ERR(sleb)); + return; + } + + printk(KERN_DEBUG "LEB %d has %d nodes ending at %d\n", lnum, + sleb->nodes_cnt, sleb->endpt); + + list_for_each_entry(snod, &sleb->nodes, list) { + cond_resched(); + printk(KERN_DEBUG "Dumping node at LEB %d:%d len %d\n", lnum, + snod->offs, snod->len); + dbg_dump_node(c, snod->node); + } + + ubifs_scan_destroy(sleb); + return; +} + +void dbg_dump_znode(const struct ubifs_info *c, + const struct ubifs_znode *znode) +{ + int n; + const struct ubifs_zbranch *zbr; + + spin_lock(&dbg_lock); + if (znode->parent) + zbr = &znode->parent->zbranch[znode->iip]; + else + zbr = &c->zroot; + + printk(KERN_DEBUG "znode %p, LEB %d:%d len %d parent %p iip %d level %d" + " child_cnt %d flags %lx\n", znode, zbr->lnum, zbr->offs, + zbr->len, znode->parent, znode->iip, znode->level, + znode->child_cnt, znode->flags); + + if (znode->child_cnt <= 0 || znode->child_cnt > c->fanout) { + spin_unlock(&dbg_lock); + return; + } + + printk(KERN_DEBUG "zbranches:\n"); + for (n = 0; n < znode->child_cnt; n++) { + zbr = &znode->zbranch[n]; + if (znode->level > 0) + printk(KERN_DEBUG "\t%d: znode %p LEB %d:%d len %d key " + "%s\n", n, zbr->znode, zbr->lnum, + zbr->offs, zbr->len, + DBGKEY(&zbr->key)); + else + printk(KERN_DEBUG "\t%d: LNC %p LEB %d:%d len %d key " + "%s\n", n, zbr->znode, zbr->lnum, + zbr->offs, zbr->len, + DBGKEY(&zbr->key)); + } + spin_unlock(&dbg_lock); +} + +void dbg_dump_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat) +{ + int i; + + printk(KERN_DEBUG "Dumping heap cat %d (%d elements)\n", + cat, heap->cnt); + for (i = 0; i < heap->cnt; i++) { + struct ubifs_lprops *lprops = heap->arr[i]; + + printk(KERN_DEBUG "\t%d. LEB %d hpos %d free %d dirty %d " + "flags %d\n", i, lprops->lnum, lprops->hpos, + lprops->free, lprops->dirty, lprops->flags); + } +} + +void dbg_dump_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode, + struct ubifs_nnode *parent, int iip) +{ + int i; + + printk(KERN_DEBUG "Dumping pnode:\n"); + printk(KERN_DEBUG "\taddress %zx parent %zx cnext %zx\n", + (size_t)pnode, (size_t)parent, (size_t)pnode->cnext); + printk(KERN_DEBUG "\tflags %lu iip %d level %d num %d\n", + pnode->flags, iip, pnode->level, pnode->num); + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + struct ubifs_lprops *lp = &pnode->lprops[i]; + + printk(KERN_DEBUG "\t%d: free %d dirty %d flags %d lnum %d\n", + i, lp->free, lp->dirty, lp->flags, lp->lnum); + } +} + +void dbg_dump_tnc(struct ubifs_info *c) +{ + struct ubifs_znode *znode; + int level; + + printk(KERN_DEBUG "\n"); + printk(KERN_DEBUG "Dumping the TNC tree\n"); + znode = ubifs_tnc_levelorder_next(c->zroot.znode, NULL); + level = znode->level; + printk(KERN_DEBUG "== Level %d ==\n", level); + while (znode) { + if (level != znode->level) { + level = znode->level; + printk(KERN_DEBUG "== Level %d ==\n", level); + } + dbg_dump_znode(c, znode); + znode = ubifs_tnc_levelorder_next(c->zroot.znode, znode); + } + + printk(KERN_DEBUG "\n"); +} + +static int dump_znode(struct ubifs_info *c, struct ubifs_znode *znode, + void *priv) +{ + dbg_dump_znode(c, znode); + return 0; +} + +/** + * dbg_dump_index - dump the on-flash index. + * @c: UBIFS file-system description object + * + * This function dumps whole UBIFS indexing B-tree, unlike 'dbg_dump_tnc()' + * which dumps only in-memory znodes and does not read znodes which from flash. + */ +void dbg_dump_index(struct ubifs_info *c) +{ + dbg_walk_index(c, NULL, dump_znode, NULL); +} + +/** + * dbg_check_synced_i_size - check synchronized inode size. + * @inode: inode to check + * + * If inode is clean, synchronized inode size has to be equivalent to current + * inode size. This function has to be called only for locked inodes (@i_mutex + * has to be locked). Returns %0 if synchronized inode size if correct, and + * %-EINVAL if not. + */ +int dbg_check_synced_i_size(struct inode *inode) +{ + int err = 0; + struct ubifs_inode *ui = ubifs_inode(inode); + + if (!(ubifs_chk_flags & UBIFS_CHK_GEN)) + return 0; + if (!S_ISREG(inode->i_mode)) + return 0; + + mutex_lock(&ui->ui_mutex); + spin_lock(&ui->ui_lock); + if (ui->ui_size != ui->synced_i_size && !ui->dirty) { + ubifs_err("ui_size is %lld, synced_i_size is %lld, but inode " + "is clean", ui->ui_size, ui->synced_i_size); + ubifs_err("i_ino %lu, i_mode %#x, i_size %lld", inode->i_ino, + inode->i_mode, i_size_read(inode)); + dbg_dump_stack(); + err = -EINVAL; + } + spin_unlock(&ui->ui_lock); + mutex_unlock(&ui->ui_mutex); + return err; +} + +/* + * dbg_check_dir - check directory inode size and link count. + * @c: UBIFS file-system description object + * @dir: the directory to calculate size for + * @size: the result is returned here + * + * This function makes sure that directory size and link count are correct. + * Returns zero in case of success and a negative error code in case of + * failure. + * + * Note, it is good idea to make sure the @dir->i_mutex is locked before + * calling this function. + */ +int dbg_check_dir_size(struct ubifs_info *c, const struct inode *dir) +{ + unsigned int nlink = 2; + union ubifs_key key; + struct ubifs_dent_node *dent, *pdent = NULL; + struct qstr nm = { .name = NULL }; + loff_t size = UBIFS_INO_NODE_SZ; + + if (!(ubifs_chk_flags & UBIFS_CHK_GEN)) + return 0; + + if (!S_ISDIR(dir->i_mode)) + return 0; + + lowest_dent_key(c, &key, dir->i_ino); + while (1) { + int err; + + dent = ubifs_tnc_next_ent(c, &key, &nm); + if (IS_ERR(dent)) { + err = PTR_ERR(dent); + if (err == -ENOENT) + break; + return err; + } + + nm.name = dent->name; + nm.len = le16_to_cpu(dent->nlen); + size += CALC_DENT_SIZE(nm.len); + if (dent->type == UBIFS_ITYPE_DIR) + nlink += 1; + kfree(pdent); + pdent = dent; + key_read(c, &dent->key, &key); + } + kfree(pdent); + + if (i_size_read(dir) != size) { + ubifs_err("directory inode %lu has size %llu, " + "but calculated size is %llu", dir->i_ino, + (unsigned long long)i_size_read(dir), + (unsigned long long)size); + dump_stack(); + return -EINVAL; + } + if (dir->i_nlink != nlink) { + ubifs_err("directory inode %lu has nlink %u, but calculated " + "nlink is %u", dir->i_ino, dir->i_nlink, nlink); + dump_stack(); + return -EINVAL; + } + + return 0; +} + +/** + * dbg_check_key_order - make sure that colliding keys are properly ordered. + * @c: UBIFS file-system description object + * @zbr1: first zbranch + * @zbr2: following zbranch + * + * In UBIFS indexing B-tree colliding keys has to be sorted in binary order of + * names of the direntries/xentries which are referred by the keys. This + * function reads direntries/xentries referred by @zbr1 and @zbr2 and makes + * sure the name of direntry/xentry referred by @zbr1 is less than + * direntry/xentry referred by @zbr2. Returns zero if this is true, %1 if not, + * and a negative error code in case of failure. + */ +static int dbg_check_key_order(struct ubifs_info *c, struct ubifs_zbranch *zbr1, + struct ubifs_zbranch *zbr2) +{ + int err, nlen1, nlen2, cmp; + struct ubifs_dent_node *dent1, *dent2; + union ubifs_key key; + + ubifs_assert(!keys_cmp(c, &zbr1->key, &zbr2->key)); + dent1 = kmalloc(UBIFS_MAX_DENT_NODE_SZ, GFP_NOFS); + if (!dent1) + return -ENOMEM; + dent2 = kmalloc(UBIFS_MAX_DENT_NODE_SZ, GFP_NOFS); + if (!dent2) { + err = -ENOMEM; + goto out_free; + } + + err = ubifs_tnc_read_node(c, zbr1, dent1); + if (err) + goto out_free; + err = ubifs_validate_entry(c, dent1); + if (err) + goto out_free; + + err = ubifs_tnc_read_node(c, zbr2, dent2); + if (err) + goto out_free; + err = ubifs_validate_entry(c, dent2); + if (err) + goto out_free; + + /* Make sure node keys are the same as in zbranch */ + err = 1; + key_read(c, &dent1->key, &key); + if (keys_cmp(c, &zbr1->key, &key)) { + dbg_err("1st entry at %d:%d has key %s", zbr1->lnum, + zbr1->offs, DBGKEY(&key)); + dbg_err("but it should have key %s according to tnc", + DBGKEY(&zbr1->key)); + dbg_dump_node(c, dent1); + goto out_free; + } + + key_read(c, &dent2->key, &key); + if (keys_cmp(c, &zbr2->key, &key)) { + dbg_err("2nd entry at %d:%d has key %s", zbr1->lnum, + zbr1->offs, DBGKEY(&key)); + dbg_err("but it should have key %s according to tnc", + DBGKEY(&zbr2->key)); + dbg_dump_node(c, dent2); + goto out_free; + } + + nlen1 = le16_to_cpu(dent1->nlen); + nlen2 = le16_to_cpu(dent2->nlen); + + cmp = memcmp(dent1->name, dent2->name, min_t(int, nlen1, nlen2)); + if (cmp < 0 || (cmp == 0 && nlen1 < nlen2)) { + err = 0; + goto out_free; + } + if (cmp == 0 && nlen1 == nlen2) + dbg_err("2 xent/dent nodes with the same name"); + else + dbg_err("bad order of colliding key %s", + DBGKEY(&key)); + + dbg_msg("first node at %d:%d\n", zbr1->lnum, zbr1->offs); + dbg_dump_node(c, dent1); + dbg_msg("second node at %d:%d\n", zbr2->lnum, zbr2->offs); + dbg_dump_node(c, dent2); + +out_free: + kfree(dent2); + kfree(dent1); + return err; +} + +/** + * dbg_check_znode - check if znode is all right. + * @c: UBIFS file-system description object + * @zbr: zbranch which points to this znode + * + * This function makes sure that znode referred to by @zbr is all right. + * Returns zero if it is, and %-EINVAL if it is not. + */ +static int dbg_check_znode(struct ubifs_info *c, struct ubifs_zbranch *zbr) +{ + struct ubifs_znode *znode = zbr->znode; + struct ubifs_znode *zp = znode->parent; + int n, err, cmp; + + if (znode->child_cnt <= 0 || znode->child_cnt > c->fanout) { + err = 1; + goto out; + } + if (znode->level < 0) { + err = 2; + goto out; + } + if (znode->iip < 0 || znode->iip >= c->fanout) { + err = 3; + goto out; + } + + if (zbr->len == 0) + /* Only dirty zbranch may have no on-flash nodes */ + if (!ubifs_zn_dirty(znode)) { + err = 4; + goto out; + } + + if (ubifs_zn_dirty(znode)) { + /* + * If znode is dirty, its parent has to be dirty as well. The + * order of the operation is important, so we have to have + * memory barriers. + */ + smp_mb(); + if (zp && !ubifs_zn_dirty(zp)) { + /* + * The dirty flag is atomic and is cleared outside the + * TNC mutex, so znode's dirty flag may now have + * been cleared. The child is always cleared before the + * parent, so we just need to check again. + */ + smp_mb(); + if (ubifs_zn_dirty(znode)) { + err = 5; + goto out; + } + } + } + + if (zp) { + const union ubifs_key *min, *max; + + if (znode->level != zp->level - 1) { + err = 6; + goto out; + } + + /* Make sure the 'parent' pointer in our znode is correct */ + err = ubifs_search_zbranch(c, zp, &zbr->key, &n); + if (!err) { + /* This zbranch does not exist in the parent */ + err = 7; + goto out; + } + + if (znode->iip >= zp->child_cnt) { + err = 8; + goto out; + } + + if (znode->iip != n) { + /* This may happen only in case of collisions */ + if (keys_cmp(c, &zp->zbranch[n].key, + &zp->zbranch[znode->iip].key)) { + err = 9; + goto out; + } + n = znode->iip; + } + + /* + * Make sure that the first key in our znode is greater than or + * equal to the key in the pointing zbranch. + */ + min = &zbr->key; + cmp = keys_cmp(c, min, &znode->zbranch[0].key); + if (cmp == 1) { + err = 10; + goto out; + } + + if (n + 1 < zp->child_cnt) { + max = &zp->zbranch[n + 1].key; + + /* + * Make sure the last key in our znode is less or + * equivalent than the the key in zbranch which goes + * after our pointing zbranch. + */ + cmp = keys_cmp(c, max, + &znode->zbranch[znode->child_cnt - 1].key); + if (cmp == -1) { + err = 11; + goto out; + } + } + } else { + /* This may only be root znode */ + if (zbr != &c->zroot) { + err = 12; + goto out; + } + } + + /* + * Make sure that next key is greater or equivalent then the previous + * one. + */ + for (n = 1; n < znode->child_cnt; n++) { + cmp = keys_cmp(c, &znode->zbranch[n - 1].key, + &znode->zbranch[n].key); + if (cmp > 0) { + err = 13; + goto out; + } + if (cmp == 0) { + /* This can only be keys with colliding hash */ + if (!is_hash_key(c, &znode->zbranch[n].key)) { + err = 14; + goto out; + } + + if (znode->level != 0 || c->replaying) + continue; + + /* + * Colliding keys should follow binary order of + * corresponding xentry/dentry names. + */ + err = dbg_check_key_order(c, &znode->zbranch[n - 1], + &znode->zbranch[n]); + if (err < 0) + return err; + if (err) { + err = 15; + goto out; + } + } + } + + for (n = 0; n < znode->child_cnt; n++) { + if (!znode->zbranch[n].znode && + (znode->zbranch[n].lnum == 0 || + znode->zbranch[n].len == 0)) { + err = 16; + goto out; + } + + if (znode->zbranch[n].lnum != 0 && + znode->zbranch[n].len == 0) { + err = 17; + goto out; + } + + if (znode->zbranch[n].lnum == 0 && + znode->zbranch[n].len != 0) { + err = 18; + goto out; + } + + if (znode->zbranch[n].lnum == 0 && + znode->zbranch[n].offs != 0) { + err = 19; + goto out; + } + + if (znode->level != 0 && znode->zbranch[n].znode) + if (znode->zbranch[n].znode->parent != znode) { + err = 20; + goto out; + } + } + + return 0; + +out: + ubifs_err("failed, error %d", err); + ubifs_msg("dump of the znode"); + dbg_dump_znode(c, znode); + if (zp) { + ubifs_msg("dump of the parent znode"); + dbg_dump_znode(c, zp); + } + dump_stack(); + return -EINVAL; +} + +/** + * dbg_check_tnc - check TNC tree. + * @c: UBIFS file-system description object + * @extra: do extra checks that are possible at start commit + * + * This function traverses whole TNC tree and checks every znode. Returns zero + * if everything is all right and %-EINVAL if something is wrong with TNC. + */ +int dbg_check_tnc(struct ubifs_info *c, int extra) +{ + struct ubifs_znode *znode; + long clean_cnt = 0, dirty_cnt = 0; + int err, last; + + if (!(ubifs_chk_flags & UBIFS_CHK_TNC)) + return 0; + + ubifs_assert(mutex_is_locked(&c->tnc_mutex)); + if (!c->zroot.znode) + return 0; + + znode = ubifs_tnc_postorder_first(c->zroot.znode); + while (1) { + struct ubifs_znode *prev; + struct ubifs_zbranch *zbr; + + if (!znode->parent) + zbr = &c->zroot; + else + zbr = &znode->parent->zbranch[znode->iip]; + + err = dbg_check_znode(c, zbr); + if (err) + return err; + + if (extra) { + if (ubifs_zn_dirty(znode)) + dirty_cnt += 1; + else + clean_cnt += 1; + } + + prev = znode; + znode = ubifs_tnc_postorder_next(znode); + if (!znode) + break; + + /* + * If the last key of this znode is equivalent to the first key + * of the next znode (collision), then check order of the keys. + */ + last = prev->child_cnt - 1; + if (prev->level == 0 && znode->level == 0 && !c->replaying && + !keys_cmp(c, &prev->zbranch[last].key, + &znode->zbranch[0].key)) { + err = dbg_check_key_order(c, &prev->zbranch[last], + &znode->zbranch[0]); + if (err < 0) + return err; + if (err) { + ubifs_msg("first znode"); + dbg_dump_znode(c, prev); + ubifs_msg("second znode"); + dbg_dump_znode(c, znode); + return -EINVAL; + } + } + } + + if (extra) { + if (clean_cnt != atomic_long_read(&c->clean_zn_cnt)) { + ubifs_err("incorrect clean_zn_cnt %ld, calculated %ld", + atomic_long_read(&c->clean_zn_cnt), + clean_cnt); + return -EINVAL; + } + if (dirty_cnt != atomic_long_read(&c->dirty_zn_cnt)) { + ubifs_err("incorrect dirty_zn_cnt %ld, calculated %ld", + atomic_long_read(&c->dirty_zn_cnt), + dirty_cnt); + return -EINVAL; + } + } + + return 0; +} + +/** + * dbg_walk_index - walk the on-flash index. + * @c: UBIFS file-system description object + * @leaf_cb: called for each leaf node + * @znode_cb: called for each indexing node + * @priv: private date which is passed to callbacks + * + * This function walks the UBIFS index and calls the @leaf_cb for each leaf + * node and @znode_cb for each indexing node. Returns zero in case of success + * and a negative error code in case of failure. + * + * It would be better if this function removed every znode it pulled to into + * the TNC, so that the behavior more closely matched the non-debugging + * behavior. + */ +int dbg_walk_index(struct ubifs_info *c, dbg_leaf_callback leaf_cb, + dbg_znode_callback znode_cb, void *priv) +{ + int err; + struct ubifs_zbranch *zbr; + struct ubifs_znode *znode, *child; + + mutex_lock(&c->tnc_mutex); + /* If the root indexing node is not in TNC - pull it */ + if (!c->zroot.znode) { + c->zroot.znode = ubifs_load_znode(c, &c->zroot, NULL, 0); + if (IS_ERR(c->zroot.znode)) { + err = PTR_ERR(c->zroot.znode); + c->zroot.znode = NULL; + goto out_unlock; + } + } + + /* + * We are going to traverse the indexing tree in the postorder manner. + * Go down and find the leftmost indexing node where we are going to + * start from. + */ + znode = c->zroot.znode; + while (znode->level > 0) { + zbr = &znode->zbranch[0]; + child = zbr->znode; + if (!child) { + child = ubifs_load_znode(c, zbr, znode, 0); + if (IS_ERR(child)) { + err = PTR_ERR(child); + goto out_unlock; + } + zbr->znode = child; + } + + znode = child; + } + + /* Iterate over all indexing nodes */ + while (1) { + int idx; + + cond_resched(); + + if (znode_cb) { + err = znode_cb(c, znode, priv); + if (err) { + ubifs_err("znode checking function returned " + "error %d", err); + dbg_dump_znode(c, znode); + goto out_dump; + } + } + if (leaf_cb && znode->level == 0) { + for (idx = 0; idx < znode->child_cnt; idx++) { + zbr = &znode->zbranch[idx]; + err = leaf_cb(c, zbr, priv); + if (err) { + ubifs_err("leaf checking function " + "returned error %d, for leaf " + "at LEB %d:%d", + err, zbr->lnum, zbr->offs); + goto out_dump; + } + } + } + + if (!znode->parent) + break; + + idx = znode->iip + 1; + znode = znode->parent; + if (idx < znode->child_cnt) { + /* Switch to the next index in the parent */ + zbr = &znode->zbranch[idx]; + child = zbr->znode; + if (!child) { + child = ubifs_load_znode(c, zbr, znode, idx); + if (IS_ERR(child)) { + err = PTR_ERR(child); + goto out_unlock; + } + zbr->znode = child; + } + znode = child; + } else + /* + * This is the last child, switch to the parent and + * continue. + */ + continue; + + /* Go to the lowest leftmost znode in the new sub-tree */ + while (znode->level > 0) { + zbr = &znode->zbranch[0]; + child = zbr->znode; + if (!child) { + child = ubifs_load_znode(c, zbr, znode, 0); + if (IS_ERR(child)) { + err = PTR_ERR(child); + goto out_unlock; + } + zbr->znode = child; + } + znode = child; + } + } + + mutex_unlock(&c->tnc_mutex); + return 0; + +out_dump: + if (znode->parent) + zbr = &znode->parent->zbranch[znode->iip]; + else + zbr = &c->zroot; + ubifs_msg("dump of znode at LEB %d:%d", zbr->lnum, zbr->offs); + dbg_dump_znode(c, znode); +out_unlock: + mutex_unlock(&c->tnc_mutex); + return err; +} + +/** + * add_size - add znode size to partially calculated index size. + * @c: UBIFS file-system description object + * @znode: znode to add size for + * @priv: partially calculated index size + * + * This is a helper function for 'dbg_check_idx_size()' which is called for + * every indexing node and adds its size to the 'long long' variable pointed to + * by @priv. + */ +static int add_size(struct ubifs_info *c, struct ubifs_znode *znode, void *priv) +{ + long long *idx_size = priv; + int add; + + add = ubifs_idx_node_sz(c, znode->child_cnt); + add = ALIGN(add, 8); + *idx_size += add; + return 0; +} + +/** + * dbg_check_idx_size - check index size. + * @c: UBIFS file-system description object + * @idx_size: size to check + * + * This function walks the UBIFS index, calculates its size and checks that the + * size is equivalent to @idx_size. Returns zero in case of success and a + * negative error code in case of failure. + */ +int dbg_check_idx_size(struct ubifs_info *c, long long idx_size) +{ + int err; + long long calc = 0; + + if (!(ubifs_chk_flags & UBIFS_CHK_IDX_SZ)) + return 0; + + err = dbg_walk_index(c, NULL, add_size, &calc); + if (err) { + ubifs_err("error %d while walking the index", err); + return err; + } + + if (calc != idx_size) { + ubifs_err("index size check failed: calculated size is %lld, " + "should be %lld", calc, idx_size); + dump_stack(); + return -EINVAL; + } + + return 0; +} + +/** + * struct fsck_inode - information about an inode used when checking the file-system. + * @rb: link in the RB-tree of inodes + * @inum: inode number + * @mode: inode type, permissions, etc + * @nlink: inode link count + * @xattr_cnt: count of extended attributes + * @references: how many directory/xattr entries refer this inode (calculated + * while walking the index) + * @calc_cnt: for directory inode count of child directories + * @size: inode size (read from on-flash inode) + * @xattr_sz: summary size of all extended attributes (read from on-flash + * inode) + * @calc_sz: for directories calculated directory size + * @calc_xcnt: count of extended attributes + * @calc_xsz: calculated summary size of all extended attributes + * @xattr_nms: sum of lengths of all extended attribute names belonging to this + * inode (read from on-flash inode) + * @calc_xnms: calculated sum of lengths of all extended attribute names + */ +struct fsck_inode { + struct rb_node rb; + ino_t inum; + umode_t mode; + unsigned int nlink; + unsigned int xattr_cnt; + int references; + int calc_cnt; + long long size; + unsigned int xattr_sz; + long long calc_sz; + long long calc_xcnt; + long long calc_xsz; + unsigned int xattr_nms; + long long calc_xnms; +}; + +/** + * struct fsck_data - private FS checking information. + * @inodes: RB-tree of all inodes (contains @struct fsck_inode objects) + */ +struct fsck_data { + struct rb_root inodes; +}; + +/** + * add_inode - add inode information to RB-tree of inodes. + * @c: UBIFS file-system description object + * @fsckd: FS checking information + * @ino: raw UBIFS inode to add + * + * This is a helper function for 'check_leaf()' which adds information about + * inode @ino to the RB-tree of inodes. Returns inode information pointer in + * case of success and a negative error code in case of failure. + */ +static struct fsck_inode *add_inode(struct ubifs_info *c, + struct fsck_data *fsckd, + struct ubifs_ino_node *ino) +{ + struct rb_node **p, *parent = NULL; + struct fsck_inode *fscki; + ino_t inum = key_inum_flash(c, &ino->key); + + p = &fsckd->inodes.rb_node; + while (*p) { + parent = *p; + fscki = rb_entry(parent, struct fsck_inode, rb); + if (inum < fscki->inum) + p = &(*p)->rb_left; + else if (inum > fscki->inum) + p = &(*p)->rb_right; + else + return fscki; + } + + if (inum > c->highest_inum) { + ubifs_err("too high inode number, max. is %lu", + c->highest_inum); + return ERR_PTR(-EINVAL); + } + + fscki = kzalloc(sizeof(struct fsck_inode), GFP_NOFS); + if (!fscki) + return ERR_PTR(-ENOMEM); + + fscki->inum = inum; + fscki->nlink = le32_to_cpu(ino->nlink); + fscki->size = le64_to_cpu(ino->size); + fscki->xattr_cnt = le32_to_cpu(ino->xattr_cnt); + fscki->xattr_sz = le32_to_cpu(ino->xattr_size); + fscki->xattr_nms = le32_to_cpu(ino->xattr_names); + fscki->mode = le32_to_cpu(ino->mode); + if (S_ISDIR(fscki->mode)) { + fscki->calc_sz = UBIFS_INO_NODE_SZ; + fscki->calc_cnt = 2; + } + rb_link_node(&fscki->rb, parent, p); + rb_insert_color(&fscki->rb, &fsckd->inodes); + return fscki; +} + +/** + * search_inode - search inode in the RB-tree of inodes. + * @fsckd: FS checking information + * @inum: inode number to search + * + * This is a helper function for 'check_leaf()' which searches inode @inum in + * the RB-tree of inodes and returns an inode information pointer or %NULL if + * the inode was not found. + */ +static struct fsck_inode *search_inode(struct fsck_data *fsckd, ino_t inum) +{ + struct rb_node *p; + struct fsck_inode *fscki; + + p = fsckd->inodes.rb_node; + while (p) { + fscki = rb_entry(p, struct fsck_inode, rb); + if (inum < fscki->inum) + p = p->rb_left; + else if (inum > fscki->inum) + p = p->rb_right; + else + return fscki; + } + return NULL; +} + +/** + * read_add_inode - read inode node and add it to RB-tree of inodes. + * @c: UBIFS file-system description object + * @fsckd: FS checking information + * @inum: inode number to read + * + * This is a helper function for 'check_leaf()' which finds inode node @inum in + * the index, reads it, and adds it to the RB-tree of inodes. Returns inode + * information pointer in case of success and a negative error code in case of + * failure. + */ +static struct fsck_inode *read_add_inode(struct ubifs_info *c, + struct fsck_data *fsckd, ino_t inum) +{ + int n, err; + union ubifs_key key; + struct ubifs_znode *znode; + struct ubifs_zbranch *zbr; + struct ubifs_ino_node *ino; + struct fsck_inode *fscki; + + fscki = search_inode(fsckd, inum); + if (fscki) + return fscki; + + ino_key_init(c, &key, inum); + err = ubifs_lookup_level0(c, &key, &znode, &n); + if (!err) { + ubifs_err("inode %lu not found in index", inum); + return ERR_PTR(-ENOENT); + } else if (err < 0) { + ubifs_err("error %d while looking up inode %lu", err, inum); + return ERR_PTR(err); + } + + zbr = &znode->zbranch[n]; + if (zbr->len < UBIFS_INO_NODE_SZ) { + ubifs_err("bad node %lu node length %d", inum, zbr->len); + return ERR_PTR(-EINVAL); + } + + ino = kmalloc(zbr->len, GFP_NOFS); + if (!ino) + return ERR_PTR(-ENOMEM); + + err = ubifs_tnc_read_node(c, zbr, ino); + if (err) { + ubifs_err("cannot read inode node at LEB %d:%d, error %d", + zbr->lnum, zbr->offs, err); + kfree(ino); + return ERR_PTR(err); + } + + fscki = add_inode(c, fsckd, ino); + kfree(ino); + if (IS_ERR(fscki)) { + ubifs_err("error %ld while adding inode %lu node", + PTR_ERR(fscki), inum); + return fscki; + } + + return fscki; +} + +/** + * check_leaf - check leaf node. + * @c: UBIFS file-system description object + * @zbr: zbranch of the leaf node to check + * @priv: FS checking information + * + * This is a helper function for 'dbg_check_filesystem()' which is called for + * every single leaf node while walking the indexing tree. It checks that the + * leaf node referred from the indexing tree exists, has correct CRC, and does + * some other basic validation. This function is also responsible for building + * an RB-tree of inodes - it adds all inodes into the RB-tree. It also + * calculates reference count, size, etc for each inode in order to later + * compare them to the information stored inside the inodes and detect possible + * inconsistencies. Returns zero in case of success and a negative error code + * in case of failure. + */ +static int check_leaf(struct ubifs_info *c, struct ubifs_zbranch *zbr, + void *priv) +{ + ino_t inum; + void *node; + struct ubifs_ch *ch; + int err, type = key_type(c, &zbr->key); + struct fsck_inode *fscki; + + if (zbr->len < UBIFS_CH_SZ) { + ubifs_err("bad leaf length %d (LEB %d:%d)", + zbr->len, zbr->lnum, zbr->offs); + return -EINVAL; + } + + node = kmalloc(zbr->len, GFP_NOFS); + if (!node) + return -ENOMEM; + + err = ubifs_tnc_read_node(c, zbr, node); + if (err) { + ubifs_err("cannot read leaf node at LEB %d:%d, error %d", + zbr->lnum, zbr->offs, err); + goto out_free; + } + + /* If this is an inode node, add it to RB-tree of inodes */ + if (type == UBIFS_INO_KEY) { + fscki = add_inode(c, priv, node); + if (IS_ERR(fscki)) { + err = PTR_ERR(fscki); + ubifs_err("error %d while adding inode node", err); + goto out_dump; + } + goto out; + } + + if (type != UBIFS_DENT_KEY && type != UBIFS_XENT_KEY && + type != UBIFS_DATA_KEY) { + ubifs_err("unexpected node type %d at LEB %d:%d", + type, zbr->lnum, zbr->offs); + err = -EINVAL; + goto out_free; + } + + ch = node; + if (le64_to_cpu(ch->sqnum) > c->max_sqnum) { + ubifs_err("too high sequence number, max. is %llu", + c->max_sqnum); + err = -EINVAL; + goto out_dump; + } + + if (type == UBIFS_DATA_KEY) { + long long blk_offs; + struct ubifs_data_node *dn = node; + + /* + * Search the inode node this data node belongs to and insert + * it to the RB-tree of inodes. + */ + inum = key_inum_flash(c, &dn->key); + fscki = read_add_inode(c, priv, inum); + if (IS_ERR(fscki)) { + err = PTR_ERR(fscki); + ubifs_err("error %d while processing data node and " + "trying to find inode node %lu", err, inum); + goto out_dump; + } + + /* Make sure the data node is within inode size */ + blk_offs = key_block_flash(c, &dn->key); + blk_offs <<= UBIFS_BLOCK_SHIFT; + blk_offs += le32_to_cpu(dn->size); + if (blk_offs > fscki->size) { + ubifs_err("data node at LEB %d:%d is not within inode " + "size %lld", zbr->lnum, zbr->offs, + fscki->size); + err = -EINVAL; + goto out_dump; + } + } else { + int nlen; + struct ubifs_dent_node *dent = node; + struct fsck_inode *fscki1; + + err = ubifs_validate_entry(c, dent); + if (err) + goto out_dump; + + /* + * Search the inode node this entry refers to and the parent + * inode node and insert them to the RB-tree of inodes. + */ + inum = le64_to_cpu(dent->inum); + fscki = read_add_inode(c, priv, inum); + if (IS_ERR(fscki)) { + err = PTR_ERR(fscki); + ubifs_err("error %d while processing entry node and " + "trying to find inode node %lu", err, inum); + goto out_dump; + } + + /* Count how many direntries or xentries refers this inode */ + fscki->references += 1; + + inum = key_inum_flash(c, &dent->key); + fscki1 = read_add_inode(c, priv, inum); + if (IS_ERR(fscki1)) { + err = PTR_ERR(fscki); + ubifs_err("error %d while processing entry node and " + "trying to find parent inode node %lu", + err, inum); + goto out_dump; + } + + nlen = le16_to_cpu(dent->nlen); + if (type == UBIFS_XENT_KEY) { + fscki1->calc_xcnt += 1; + fscki1->calc_xsz += CALC_DENT_SIZE(nlen); + fscki1->calc_xsz += CALC_XATTR_BYTES(fscki->size); + fscki1->calc_xnms += nlen; + } else { + fscki1->calc_sz += CALC_DENT_SIZE(nlen); + if (dent->type == UBIFS_ITYPE_DIR) + fscki1->calc_cnt += 1; + } + } + +out: + kfree(node); + return 0; + +out_dump: + ubifs_msg("dump of node at LEB %d:%d", zbr->lnum, zbr->offs); + dbg_dump_node(c, node); +out_free: + kfree(node); + return err; +} + +/** + * free_inodes - free RB-tree of inodes. + * @fsckd: FS checking information + */ +static void free_inodes(struct fsck_data *fsckd) +{ + struct rb_node *this = fsckd->inodes.rb_node; + struct fsck_inode *fscki; + + while (this) { + if (this->rb_left) + this = this->rb_left; + else if (this->rb_right) + this = this->rb_right; + else { + fscki = rb_entry(this, struct fsck_inode, rb); + this = rb_parent(this); + if (this) { + if (this->rb_left == &fscki->rb) + this->rb_left = NULL; + else + this->rb_right = NULL; + } + kfree(fscki); + } + } +} + +/** + * check_inodes - checks all inodes. + * @c: UBIFS file-system description object + * @fsckd: FS checking information + * + * This is a helper function for 'dbg_check_filesystem()' which walks the + * RB-tree of inodes after the index scan has been finished, and checks that + * inode nlink, size, etc are correct. Returns zero if inodes are fine, + * %-EINVAL if not, and a negative error code in case of failure. + */ +static int check_inodes(struct ubifs_info *c, struct fsck_data *fsckd) +{ + int n, err; + union ubifs_key key; + struct ubifs_znode *znode; + struct ubifs_zbranch *zbr; + struct ubifs_ino_node *ino; + struct fsck_inode *fscki; + struct rb_node *this = rb_first(&fsckd->inodes); + + while (this) { + fscki = rb_entry(this, struct fsck_inode, rb); + this = rb_next(this); + + if (S_ISDIR(fscki->mode)) { + /* + * Directories have to have exactly one reference (they + * cannot have hardlinks), although root inode is an + * exception. + */ + if (fscki->inum != UBIFS_ROOT_INO && + fscki->references != 1) { + ubifs_err("directory inode %lu has %d " + "direntries which refer it, but " + "should be 1", fscki->inum, + fscki->references); + goto out_dump; + } + if (fscki->inum == UBIFS_ROOT_INO && + fscki->references != 0) { + ubifs_err("root inode %lu has non-zero (%d) " + "direntries which refer it", + fscki->inum, fscki->references); + goto out_dump; + } + if (fscki->calc_sz != fscki->size) { + ubifs_err("directory inode %lu size is %lld, " + "but calculated size is %lld", + fscki->inum, fscki->size, + fscki->calc_sz); + goto out_dump; + } + if (fscki->calc_cnt != fscki->nlink) { + ubifs_err("directory inode %lu nlink is %d, " + "but calculated nlink is %d", + fscki->inum, fscki->nlink, + fscki->calc_cnt); + goto out_dump; + } + } else { + if (fscki->references != fscki->nlink) { + ubifs_err("inode %lu nlink is %d, but " + "calculated nlink is %d", fscki->inum, + fscki->nlink, fscki->references); + goto out_dump; + } + } + if (fscki->xattr_sz != fscki->calc_xsz) { + ubifs_err("inode %lu has xattr size %u, but " + "calculated size is %lld", + fscki->inum, fscki->xattr_sz, + fscki->calc_xsz); + goto out_dump; + } + if (fscki->xattr_cnt != fscki->calc_xcnt) { + ubifs_err("inode %lu has %u xattrs, but " + "calculated count is %lld", fscki->inum, + fscki->xattr_cnt, fscki->calc_xcnt); + goto out_dump; + } + if (fscki->xattr_nms != fscki->calc_xnms) { + ubifs_err("inode %lu has xattr names' size %u, but " + "calculated names' size is %lld", + fscki->inum, fscki->xattr_nms, + fscki->calc_xnms); + goto out_dump; + } + } + + return 0; + +out_dump: + /* Read the bad inode and dump it */ + ino_key_init(c, &key, fscki->inum); + err = ubifs_lookup_level0(c, &key, &znode, &n); + if (!err) { + ubifs_err("inode %lu not found in index", fscki->inum); + return -ENOENT; + } else if (err < 0) { + ubifs_err("error %d while looking up inode %lu", + err, fscki->inum); + return err; + } + + zbr = &znode->zbranch[n]; + ino = kmalloc(zbr->len, GFP_NOFS); + if (!ino) + return -ENOMEM; + + err = ubifs_tnc_read_node(c, zbr, ino); + if (err) { + ubifs_err("cannot read inode node at LEB %d:%d, error %d", + zbr->lnum, zbr->offs, err); + kfree(ino); + return err; + } + + ubifs_msg("dump of the inode %lu sitting in LEB %d:%d", + fscki->inum, zbr->lnum, zbr->offs); + dbg_dump_node(c, ino); + kfree(ino); + return -EINVAL; +} + +/** + * dbg_check_filesystem - check the file-system. + * @c: UBIFS file-system description object + * + * This function checks the file system, namely: + * o makes sure that all leaf nodes exist and their CRCs are correct; + * o makes sure inode nlink, size, xattr size/count are correct (for all + * inodes). + * + * The function reads whole indexing tree and all nodes, so it is pretty + * heavy-weight. Returns zero if the file-system is consistent, %-EINVAL if + * not, and a negative error code in case of failure. + */ +int dbg_check_filesystem(struct ubifs_info *c) +{ + int err; + struct fsck_data fsckd; + + if (!(ubifs_chk_flags & UBIFS_CHK_FS)) + return 0; + + fsckd.inodes = RB_ROOT; + err = dbg_walk_index(c, check_leaf, NULL, &fsckd); + if (err) + goto out_free; + + err = check_inodes(c, &fsckd); + if (err) + goto out_free; + + free_inodes(&fsckd); + return 0; + +out_free: + ubifs_err("file-system check failed with error %d", err); + dump_stack(); + free_inodes(&fsckd); + return err; +} + +static int invocation_cnt; + +int dbg_force_in_the_gaps(void) +{ + if (!dbg_force_in_the_gaps_enabled) + return 0; + /* Force in-the-gaps every 8th commit */ + return !((invocation_cnt++) & 0x7); +} + +/* Failure mode for recovery testing */ + +#define chance(n, d) (simple_rand() <= (n) * 32768LL / (d)) + +struct failure_mode_info { + struct list_head list; + struct ubifs_info *c; +}; + +static LIST_HEAD(fmi_list); +static DEFINE_SPINLOCK(fmi_lock); + +static unsigned int next; + +static int simple_rand(void) +{ + if (next == 0) + next = current->pid; + next = next * 1103515245 + 12345; + return (next >> 16) & 32767; +} + +void dbg_failure_mode_registration(struct ubifs_info *c) +{ + struct failure_mode_info *fmi; + + fmi = kmalloc(sizeof(struct failure_mode_info), GFP_NOFS); + if (!fmi) { + dbg_err("Failed to register failure mode - no memory"); + return; + } + fmi->c = c; + spin_lock(&fmi_lock); + list_add_tail(&fmi->list, &fmi_list); + spin_unlock(&fmi_lock); +} + +void dbg_failure_mode_deregistration(struct ubifs_info *c) +{ + struct failure_mode_info *fmi, *tmp; + + spin_lock(&fmi_lock); + list_for_each_entry_safe(fmi, tmp, &fmi_list, list) + if (fmi->c == c) { + list_del(&fmi->list); + kfree(fmi); + } + spin_unlock(&fmi_lock); +} + +static struct ubifs_info *dbg_find_info(struct ubi_volume_desc *desc) +{ + struct failure_mode_info *fmi; + + spin_lock(&fmi_lock); + list_for_each_entry(fmi, &fmi_list, list) + if (fmi->c->ubi == desc) { + struct ubifs_info *c = fmi->c; + + spin_unlock(&fmi_lock); + return c; + } + spin_unlock(&fmi_lock); + return NULL; +} + +static int in_failure_mode(struct ubi_volume_desc *desc) +{ + struct ubifs_info *c = dbg_find_info(desc); + + if (c && dbg_failure_mode) + return c->failure_mode; + return 0; +} + +static int do_fail(struct ubi_volume_desc *desc, int lnum, int write) +{ + struct ubifs_info *c = dbg_find_info(desc); + + if (!c || !dbg_failure_mode) + return 0; + if (c->failure_mode) + return 1; + if (!c->fail_cnt) { + /* First call - decide delay to failure */ + if (chance(1, 2)) { + unsigned int delay = 1 << (simple_rand() >> 11); + + if (chance(1, 2)) { + c->fail_delay = 1; + c->fail_timeout = jiffies + + msecs_to_jiffies(delay); + dbg_rcvry("failing after %ums", delay); + } else { + c->fail_delay = 2; + c->fail_cnt_max = delay; + dbg_rcvry("failing after %u calls", delay); + } + } + c->fail_cnt += 1; + } + /* Determine if failure delay has expired */ + if (c->fail_delay == 1) { + if (time_before(jiffies, c->fail_timeout)) + return 0; + } else if (c->fail_delay == 2) + if (c->fail_cnt++ < c->fail_cnt_max) + return 0; + if (lnum == UBIFS_SB_LNUM) { + if (write) { + if (chance(1, 2)) + return 0; + } else if (chance(19, 20)) + return 0; + dbg_rcvry("failing in super block LEB %d", lnum); + } else if (lnum == UBIFS_MST_LNUM || lnum == UBIFS_MST_LNUM + 1) { + if (chance(19, 20)) + return 0; + dbg_rcvry("failing in master LEB %d", lnum); + } else if (lnum >= UBIFS_LOG_LNUM && lnum <= c->log_last) { + if (write) { + if (chance(99, 100)) + return 0; + } else if (chance(399, 400)) + return 0; + dbg_rcvry("failing in log LEB %d", lnum); + } else if (lnum >= c->lpt_first && lnum <= c->lpt_last) { + if (write) { + if (chance(7, 8)) + return 0; + } else if (chance(19, 20)) + return 0; + dbg_rcvry("failing in LPT LEB %d", lnum); + } else if (lnum >= c->orph_first && lnum <= c->orph_last) { + if (write) { + if (chance(1, 2)) + return 0; + } else if (chance(9, 10)) + return 0; + dbg_rcvry("failing in orphan LEB %d", lnum); + } else if (lnum == c->ihead_lnum) { + if (chance(99, 100)) + return 0; + dbg_rcvry("failing in index head LEB %d", lnum); + } else if (c->jheads && lnum == c->jheads[GCHD].wbuf.lnum) { + if (chance(9, 10)) + return 0; + dbg_rcvry("failing in GC head LEB %d", lnum); + } else if (write && !RB_EMPTY_ROOT(&c->buds) && + !ubifs_search_bud(c, lnum)) { + if (chance(19, 20)) + return 0; + dbg_rcvry("failing in non-bud LEB %d", lnum); + } else if (c->cmt_state == COMMIT_RUNNING_BACKGROUND || + c->cmt_state == COMMIT_RUNNING_REQUIRED) { + if (chance(999, 1000)) + return 0; + dbg_rcvry("failing in bud LEB %d commit running", lnum); + } else { + if (chance(9999, 10000)) + return 0; + dbg_rcvry("failing in bud LEB %d commit not running", lnum); + } + ubifs_err("*** SETTING FAILURE MODE ON (LEB %d) ***", lnum); + c->failure_mode = 1; + dump_stack(); + return 1; +} + +static void cut_data(const void *buf, int len) +{ + int flen, i; + unsigned char *p = (void *)buf; + + flen = (len * (long long)simple_rand()) >> 15; + for (i = flen; i < len; i++) + p[i] = 0xff; +} + +int dbg_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset, + int len, int check) +{ + if (in_failure_mode(desc)) + return -EIO; + return ubi_leb_read(desc, lnum, buf, offset, len, check); +} + +int dbg_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf, + int offset, int len, int dtype) +{ + int err; + + if (in_failure_mode(desc)) + return -EIO; + if (do_fail(desc, lnum, 1)) + cut_data(buf, len); + err = ubi_leb_write(desc, lnum, buf, offset, len, dtype); + if (err) + return err; + if (in_failure_mode(desc)) + return -EIO; + return 0; +} + +int dbg_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf, + int len, int dtype) +{ + int err; + + if (do_fail(desc, lnum, 1)) + return -EIO; + err = ubi_leb_change(desc, lnum, buf, len, dtype); + if (err) + return err; + if (do_fail(desc, lnum, 1)) + return -EIO; + return 0; +} + +int dbg_leb_erase(struct ubi_volume_desc *desc, int lnum) +{ + int err; + + if (do_fail(desc, lnum, 0)) + return -EIO; + err = ubi_leb_erase(desc, lnum); + if (err) + return err; + if (do_fail(desc, lnum, 0)) + return -EIO; + return 0; +} + +int dbg_leb_unmap(struct ubi_volume_desc *desc, int lnum) +{ + int err; + + if (do_fail(desc, lnum, 0)) + return -EIO; + err = ubi_leb_unmap(desc, lnum); + if (err) + return err; + if (do_fail(desc, lnum, 0)) + return -EIO; + return 0; +} + +int dbg_is_mapped(struct ubi_volume_desc *desc, int lnum) +{ + if (in_failure_mode(desc)) + return -EIO; + return ubi_is_mapped(desc, lnum); +} + +int dbg_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype) +{ + int err; + + if (do_fail(desc, lnum, 0)) + return -EIO; + err = ubi_leb_map(desc, lnum, dtype); + if (err) + return err; + if (do_fail(desc, lnum, 0)) + return -EIO; + return 0; +} + +#endif /* CONFIG_UBIFS_FS_DEBUG */ diff --git a/fs/ubifs/debug.h b/fs/ubifs/debug.h new file mode 100644 index 000000000000..3c4f1e93c9e0 --- /dev/null +++ b/fs/ubifs/debug.h @@ -0,0 +1,403 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +#ifndef __UBIFS_DEBUG_H__ +#define __UBIFS_DEBUG_H__ + +#ifdef CONFIG_UBIFS_FS_DEBUG + +#define UBIFS_DBG(op) op + +#define ubifs_assert(expr) do { \ + if (unlikely(!(expr))) { \ + printk(KERN_CRIT "UBIFS assert failed in %s at %u (pid %d)\n", \ + __func__, __LINE__, current->pid); \ + dbg_dump_stack(); \ + } \ +} while (0) + +#define ubifs_assert_cmt_locked(c) do { \ + if (unlikely(down_write_trylock(&(c)->commit_sem))) { \ + up_write(&(c)->commit_sem); \ + printk(KERN_CRIT "commit lock is not locked!\n"); \ + ubifs_assert(0); \ + } \ +} while (0) + +#define dbg_dump_stack() do { \ + if (!dbg_failure_mode) \ + dump_stack(); \ +} while (0) + +/* Generic debugging messages */ +#define dbg_msg(fmt, ...) do { \ + spin_lock(&dbg_lock); \ + printk(KERN_DEBUG "UBIFS DBG (pid %d): %s: " fmt "\n", current->pid, \ + __func__, ##__VA_ARGS__); \ + spin_unlock(&dbg_lock); \ +} while (0) + +#define dbg_do_msg(typ, fmt, ...) do { \ + if (ubifs_msg_flags & typ) \ + dbg_msg(fmt, ##__VA_ARGS__); \ +} while (0) + +#define dbg_err(fmt, ...) do { \ + spin_lock(&dbg_lock); \ + ubifs_err(fmt, ##__VA_ARGS__); \ + spin_unlock(&dbg_lock); \ +} while (0) + +const char *dbg_key_str0(const struct ubifs_info *c, + const union ubifs_key *key); +const char *dbg_key_str1(const struct ubifs_info *c, + const union ubifs_key *key); + +/* + * DBGKEY macros require dbg_lock to be held, which it is in the dbg message + * macros. + */ +#define DBGKEY(key) dbg_key_str0(c, (key)) +#define DBGKEY1(key) dbg_key_str1(c, (key)) + +/* General messages */ +#define dbg_gen(fmt, ...) dbg_do_msg(UBIFS_MSG_GEN, fmt, ##__VA_ARGS__) + +/* Additional journal messages */ +#define dbg_jnl(fmt, ...) dbg_do_msg(UBIFS_MSG_JNL, fmt, ##__VA_ARGS__) + +/* Additional TNC messages */ +#define dbg_tnc(fmt, ...) dbg_do_msg(UBIFS_MSG_TNC, fmt, ##__VA_ARGS__) + +/* Additional lprops messages */ +#define dbg_lp(fmt, ...) dbg_do_msg(UBIFS_MSG_LP, fmt, ##__VA_ARGS__) + +/* Additional LEB find messages */ +#define dbg_find(fmt, ...) dbg_do_msg(UBIFS_MSG_FIND, fmt, ##__VA_ARGS__) + +/* Additional mount messages */ +#define dbg_mnt(fmt, ...) dbg_do_msg(UBIFS_MSG_MNT, fmt, ##__VA_ARGS__) + +/* Additional I/O messages */ +#define dbg_io(fmt, ...) dbg_do_msg(UBIFS_MSG_IO, fmt, ##__VA_ARGS__) + +/* Additional commit messages */ +#define dbg_cmt(fmt, ...) dbg_do_msg(UBIFS_MSG_CMT, fmt, ##__VA_ARGS__) + +/* Additional budgeting messages */ +#define dbg_budg(fmt, ...) dbg_do_msg(UBIFS_MSG_BUDG, fmt, ##__VA_ARGS__) + +/* Additional log messages */ +#define dbg_log(fmt, ...) dbg_do_msg(UBIFS_MSG_LOG, fmt, ##__VA_ARGS__) + +/* Additional gc messages */ +#define dbg_gc(fmt, ...) dbg_do_msg(UBIFS_MSG_GC, fmt, ##__VA_ARGS__) + +/* Additional scan messages */ +#define dbg_scan(fmt, ...) dbg_do_msg(UBIFS_MSG_SCAN, fmt, ##__VA_ARGS__) + +/* Additional recovery messages */ +#define dbg_rcvry(fmt, ...) dbg_do_msg(UBIFS_MSG_RCVRY, fmt, ##__VA_ARGS__) + +/* + * Debugging message type flags (must match msg_type_names in debug.c). + * + * UBIFS_MSG_GEN: general messages + * UBIFS_MSG_JNL: journal messages + * UBIFS_MSG_MNT: mount messages + * UBIFS_MSG_CMT: commit messages + * UBIFS_MSG_FIND: LEB find messages + * UBIFS_MSG_BUDG: budgeting messages + * UBIFS_MSG_GC: garbage collection messages + * UBIFS_MSG_TNC: TNC messages + * UBIFS_MSG_LP: lprops messages + * UBIFS_MSG_IO: I/O messages + * UBIFS_MSG_LOG: log messages + * UBIFS_MSG_SCAN: scan messages + * UBIFS_MSG_RCVRY: recovery messages + */ +enum { + UBIFS_MSG_GEN = 0x1, + UBIFS_MSG_JNL = 0x2, + UBIFS_MSG_MNT = 0x4, + UBIFS_MSG_CMT = 0x8, + UBIFS_MSG_FIND = 0x10, + UBIFS_MSG_BUDG = 0x20, + UBIFS_MSG_GC = 0x40, + UBIFS_MSG_TNC = 0x80, + UBIFS_MSG_LP = 0x100, + UBIFS_MSG_IO = 0x200, + UBIFS_MSG_LOG = 0x400, + UBIFS_MSG_SCAN = 0x800, + UBIFS_MSG_RCVRY = 0x1000, +}; + +/* Debugging message type flags for each default debug message level */ +#define UBIFS_MSG_LVL_0 0 +#define UBIFS_MSG_LVL_1 0x1 +#define UBIFS_MSG_LVL_2 0x7f +#define UBIFS_MSG_LVL_3 0xffff + +/* + * Debugging check flags (must match chk_names in debug.c). + * + * UBIFS_CHK_GEN: general checks + * UBIFS_CHK_TNC: check TNC + * UBIFS_CHK_IDX_SZ: check index size + * UBIFS_CHK_ORPH: check orphans + * UBIFS_CHK_OLD_IDX: check the old index + * UBIFS_CHK_LPROPS: check lprops + * UBIFS_CHK_FS: check the file-system + */ +enum { + UBIFS_CHK_GEN = 0x1, + UBIFS_CHK_TNC = 0x2, + UBIFS_CHK_IDX_SZ = 0x4, + UBIFS_CHK_ORPH = 0x8, + UBIFS_CHK_OLD_IDX = 0x10, + UBIFS_CHK_LPROPS = 0x20, + UBIFS_CHK_FS = 0x40, +}; + +/* + * Special testing flags (must match tst_names in debug.c). + * + * UBIFS_TST_FORCE_IN_THE_GAPS: force the use of in-the-gaps method + * UBIFS_TST_RCVRY: failure mode for recovery testing + */ +enum { + UBIFS_TST_FORCE_IN_THE_GAPS = 0x2, + UBIFS_TST_RCVRY = 0x4, +}; + +#if CONFIG_UBIFS_FS_DEBUG_MSG_LVL == 1 +#define UBIFS_MSG_FLAGS_DEFAULT UBIFS_MSG_LVL_1 +#elif CONFIG_UBIFS_FS_DEBUG_MSG_LVL == 2 +#define UBIFS_MSG_FLAGS_DEFAULT UBIFS_MSG_LVL_2 +#elif CONFIG_UBIFS_FS_DEBUG_MSG_LVL == 3 +#define UBIFS_MSG_FLAGS_DEFAULT UBIFS_MSG_LVL_3 +#else +#define UBIFS_MSG_FLAGS_DEFAULT UBIFS_MSG_LVL_0 +#endif + +#ifdef CONFIG_UBIFS_FS_DEBUG_CHKS +#define UBIFS_CHK_FLAGS_DEFAULT 0xffffffff +#else +#define UBIFS_CHK_FLAGS_DEFAULT 0 +#endif + +extern spinlock_t dbg_lock; + +extern unsigned int ubifs_msg_flags; +extern unsigned int ubifs_chk_flags; +extern unsigned int ubifs_tst_flags; + +/* Dump functions */ + +const char *dbg_ntype(int type); +const char *dbg_cstate(int cmt_state); +const char *dbg_get_key_dump(const struct ubifs_info *c, + const union ubifs_key *key); +void dbg_dump_inode(const struct ubifs_info *c, const struct inode *inode); +void dbg_dump_node(const struct ubifs_info *c, const void *node); +void dbg_dump_budget_req(const struct ubifs_budget_req *req); +void dbg_dump_lstats(const struct ubifs_lp_stats *lst); +void dbg_dump_budg(struct ubifs_info *c); +void dbg_dump_lprop(const struct ubifs_info *c, const struct ubifs_lprops *lp); +void dbg_dump_lprops(struct ubifs_info *c); +void dbg_dump_leb(const struct ubifs_info *c, int lnum); +void dbg_dump_znode(const struct ubifs_info *c, + const struct ubifs_znode *znode); +void dbg_dump_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat); +void dbg_dump_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode, + struct ubifs_nnode *parent, int iip); +void dbg_dump_tnc(struct ubifs_info *c); +void dbg_dump_index(struct ubifs_info *c); + +/* Checking helper functions */ + +typedef int (*dbg_leaf_callback)(struct ubifs_info *c, + struct ubifs_zbranch *zbr, void *priv); +typedef int (*dbg_znode_callback)(struct ubifs_info *c, + struct ubifs_znode *znode, void *priv); + +int dbg_walk_index(struct ubifs_info *c, dbg_leaf_callback leaf_cb, + dbg_znode_callback znode_cb, void *priv); + +/* Checking functions */ + +int dbg_check_lprops(struct ubifs_info *c); + +int dbg_old_index_check_init(struct ubifs_info *c, struct ubifs_zbranch *zroot); +int dbg_check_old_index(struct ubifs_info *c, struct ubifs_zbranch *zroot); + +int dbg_check_cats(struct ubifs_info *c); + +int dbg_check_ltab(struct ubifs_info *c); + +int dbg_check_synced_i_size(struct inode *inode); + +int dbg_check_dir_size(struct ubifs_info *c, const struct inode *dir); + +int dbg_check_tnc(struct ubifs_info *c, int extra); + +int dbg_check_idx_size(struct ubifs_info *c, long long idx_size); + +int dbg_check_filesystem(struct ubifs_info *c); + +void dbg_check_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat, + int add_pos); + +int dbg_check_lprops(struct ubifs_info *c); +int dbg_check_lpt_nodes(struct ubifs_info *c, struct ubifs_cnode *cnode, + int row, int col); + +/* Force the use of in-the-gaps method for testing */ + +#define dbg_force_in_the_gaps_enabled \ + (ubifs_tst_flags & UBIFS_TST_FORCE_IN_THE_GAPS) + +int dbg_force_in_the_gaps(void); + +/* Failure mode for recovery testing */ + +#define dbg_failure_mode (ubifs_tst_flags & UBIFS_TST_RCVRY) + +void dbg_failure_mode_registration(struct ubifs_info *c); +void dbg_failure_mode_deregistration(struct ubifs_info *c); + +#ifndef UBIFS_DBG_PRESERVE_UBI + +#define ubi_leb_read dbg_leb_read +#define ubi_leb_write dbg_leb_write +#define ubi_leb_change dbg_leb_change +#define ubi_leb_erase dbg_leb_erase +#define ubi_leb_unmap dbg_leb_unmap +#define ubi_is_mapped dbg_is_mapped +#define ubi_leb_map dbg_leb_map + +#endif + +int dbg_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset, + int len, int check); +int dbg_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf, + int offset, int len, int dtype); +int dbg_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf, + int len, int dtype); +int dbg_leb_erase(struct ubi_volume_desc *desc, int lnum); +int dbg_leb_unmap(struct ubi_volume_desc *desc, int lnum); +int dbg_is_mapped(struct ubi_volume_desc *desc, int lnum); +int dbg_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype); + +static inline int dbg_read(struct ubi_volume_desc *desc, int lnum, char *buf, + int offset, int len) +{ + return dbg_leb_read(desc, lnum, buf, offset, len, 0); +} + +static inline int dbg_write(struct ubi_volume_desc *desc, int lnum, + const void *buf, int offset, int len) +{ + return dbg_leb_write(desc, lnum, buf, offset, len, UBI_UNKNOWN); +} + +static inline int dbg_change(struct ubi_volume_desc *desc, int lnum, + const void *buf, int len) +{ + return dbg_leb_change(desc, lnum, buf, len, UBI_UNKNOWN); +} + +#else /* !CONFIG_UBIFS_FS_DEBUG */ + +#define UBIFS_DBG(op) +#define ubifs_assert(expr) ({}) +#define ubifs_assert_cmt_locked(c) +#define dbg_dump_stack() +#define dbg_err(fmt, ...) ({}) +#define dbg_msg(fmt, ...) ({}) +#define dbg_key(c, key, fmt, ...) ({}) + +#define dbg_gen(fmt, ...) ({}) +#define dbg_jnl(fmt, ...) ({}) +#define dbg_tnc(fmt, ...) ({}) +#define dbg_lp(fmt, ...) ({}) +#define dbg_find(fmt, ...) ({}) +#define dbg_mnt(fmt, ...) ({}) +#define dbg_io(fmt, ...) ({}) +#define dbg_cmt(fmt, ...) ({}) +#define dbg_budg(fmt, ...) ({}) +#define dbg_log(fmt, ...) ({}) +#define dbg_gc(fmt, ...) ({}) +#define dbg_scan(fmt, ...) ({}) +#define dbg_rcvry(fmt, ...) ({}) + +#define dbg_ntype(type) "" +#define dbg_cstate(cmt_state) "" +#define dbg_get_key_dump(c, key) ({}) +#define dbg_dump_inode(c, inode) ({}) +#define dbg_dump_node(c, node) ({}) +#define dbg_dump_budget_req(req) ({}) +#define dbg_dump_lstats(lst) ({}) +#define dbg_dump_budg(c) ({}) +#define dbg_dump_lprop(c, lp) ({}) +#define dbg_dump_lprops(c) ({}) +#define dbg_dump_leb(c, lnum) ({}) +#define dbg_dump_znode(c, znode) ({}) +#define dbg_dump_heap(c, heap, cat) ({}) +#define dbg_dump_pnode(c, pnode, parent, iip) ({}) +#define dbg_dump_tnc(c) ({}) +#define dbg_dump_index(c) ({}) + +#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0 + +#define dbg_old_index_check_init(c, zroot) 0 +#define dbg_check_old_index(c, zroot) 0 + +#define dbg_check_cats(c) 0 + +#define dbg_check_ltab(c) 0 + +#define dbg_check_synced_i_size(inode) 0 + +#define dbg_check_dir_size(c, dir) 0 + +#define dbg_check_tnc(c, x) 0 + +#define dbg_check_idx_size(c, idx_size) 0 + +#define dbg_check_filesystem(c) 0 + +#define dbg_check_heap(c, heap, cat, add_pos) ({}) + +#define dbg_check_lprops(c) 0 +#define dbg_check_lpt_nodes(c, cnode, row, col) 0 + +#define dbg_force_in_the_gaps_enabled 0 +#define dbg_force_in_the_gaps() 0 + +#define dbg_failure_mode 0 +#define dbg_failure_mode_registration(c) ({}) +#define dbg_failure_mode_deregistration(c) ({}) + +#endif /* !CONFIG_UBIFS_FS_DEBUG */ + +#endif /* !__UBIFS_DEBUG_H__ */ diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c new file mode 100644 index 000000000000..e90374be7d3b --- /dev/null +++ b/fs/ubifs/dir.c @@ -0,0 +1,1240 @@ +/* * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * Copyright (C) 2006, 2007 University of Szeged, Hungary + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + * Zoltan Sogor + */ + +/* + * This file implements directory operations. + * + * All FS operations in this file allocate budget before writing anything to the + * media. If they fail to allocate it, the error is returned. The only + * exceptions are 'ubifs_unlink()' and 'ubifs_rmdir()' which keep working even + * if they unable to allocate the budget, because deletion %-ENOSPC failure is + * not what users are usually ready to get. UBIFS budgeting subsystem has some + * space reserved for these purposes. + * + * All operations in this file write all inodes which they change straight + * away, instead of marking them dirty. For example, 'ubifs_link()' changes + * @i_size of the parent inode and writes the parent inode together with the + * target inode. This was done to simplify file-system recovery which would + * otherwise be very difficult to do. The only exception is rename which marks + * the re-named inode dirty (because its @i_ctime is updated) but does not + * write it, but just marks it as dirty. + */ + +#include "ubifs.h" + +/** + * inherit_flags - inherit flags of the parent inode. + * @dir: parent inode + * @mode: new inode mode flags + * + * This is a helper function for 'ubifs_new_inode()' which inherits flag of the + * parent directory inode @dir. UBIFS inodes inherit the following flags: + * o %UBIFS_COMPR_FL, which is useful to switch compression on/of on + * sub-directory basis; + * o %UBIFS_SYNC_FL - useful for the same reasons; + * o %UBIFS_DIRSYNC_FL - similar, but relevant only to directories. + * + * This function returns the inherited flags. + */ +static int inherit_flags(const struct inode *dir, int mode) +{ + int flags; + const struct ubifs_inode *ui = ubifs_inode(dir); + + if (!S_ISDIR(dir->i_mode)) + /* + * The parent is not a directory, which means that an extended + * attribute inode is being created. No flags. + */ + return 0; + + flags = ui->flags & (UBIFS_COMPR_FL | UBIFS_SYNC_FL | UBIFS_DIRSYNC_FL); + if (!S_ISDIR(mode)) + /* The "DIRSYNC" flag only applies to directories */ + flags &= ~UBIFS_DIRSYNC_FL; + return flags; +} + +/** + * ubifs_new_inode - allocate new UBIFS inode object. + * @c: UBIFS file-system description object + * @dir: parent directory inode + * @mode: inode mode flags + * + * This function finds an unused inode number, allocates new inode and + * initializes it. Returns new inode in case of success and an error code in + * case of failure. + */ +struct inode *ubifs_new_inode(struct ubifs_info *c, const struct inode *dir, + int mode) +{ + struct inode *inode; + struct ubifs_inode *ui; + + inode = new_inode(c->vfs_sb); + ui = ubifs_inode(inode); + if (!inode) + return ERR_PTR(-ENOMEM); + + /* + * Set 'S_NOCMTIME' to prevent VFS form updating [mc]time of inodes and + * marking them dirty in file write path (see 'file_update_time()'). + * UBIFS has to fully control "clean <-> dirty" transitions of inodes + * to make budgeting work. + */ + inode->i_flags |= (S_NOCMTIME); + + inode->i_uid = current->fsuid; + if (dir->i_mode & S_ISGID) { + inode->i_gid = dir->i_gid; + if (S_ISDIR(mode)) + mode |= S_ISGID; + } else + inode->i_gid = current->fsgid; + inode->i_mode = mode; + inode->i_mtime = inode->i_atime = inode->i_ctime = + ubifs_current_time(inode); + inode->i_mapping->nrpages = 0; + /* Disable readahead */ + inode->i_mapping->backing_dev_info = &c->bdi; + + switch (mode & S_IFMT) { + case S_IFREG: + inode->i_mapping->a_ops = &ubifs_file_address_operations; + inode->i_op = &ubifs_file_inode_operations; + inode->i_fop = &ubifs_file_operations; + break; + case S_IFDIR: + inode->i_op = &ubifs_dir_inode_operations; + inode->i_fop = &ubifs_dir_operations; + inode->i_size = ui->ui_size = UBIFS_INO_NODE_SZ; + break; + case S_IFLNK: + inode->i_op = &ubifs_symlink_inode_operations; + break; + case S_IFSOCK: + case S_IFIFO: + case S_IFBLK: + case S_IFCHR: + inode->i_op = &ubifs_file_inode_operations; + break; + default: + BUG(); + } + + ui->flags = inherit_flags(dir, mode); + ubifs_set_inode_flags(inode); + if (S_ISREG(mode)) + ui->compr_type = c->default_compr; + else + ui->compr_type = UBIFS_COMPR_NONE; + ui->synced_i_size = 0; + + spin_lock(&c->cnt_lock); + /* Inode number overflow is currently not supported */ + if (c->highest_inum >= INUM_WARN_WATERMARK) { + if (c->highest_inum >= INUM_WATERMARK) { + spin_unlock(&c->cnt_lock); + ubifs_err("out of inode numbers"); + make_bad_inode(inode); + iput(inode); + return ERR_PTR(-EINVAL); + } + ubifs_warn("running out of inode numbers (current %lu, max %d)", + c->highest_inum, INUM_WATERMARK); + } + + inode->i_ino = ++c->highest_inum; + inode->i_generation = ++c->vfs_gen; + /* + * The creation sequence number remains with this inode for its + * lifetime. All nodes for this inode have a greater sequence number, + * and so it is possible to distinguish obsolete nodes belonging to a + * previous incarnation of the same inode number - for example, for the + * purpose of rebuilding the index. + */ + ui->creat_sqnum = ++c->max_sqnum; + spin_unlock(&c->cnt_lock); + return inode; +} + +#ifdef CONFIG_UBIFS_FS_DEBUG + +static int dbg_check_name(struct ubifs_dent_node *dent, struct qstr *nm) +{ + if (!(ubifs_chk_flags & UBIFS_CHK_GEN)) + return 0; + if (le16_to_cpu(dent->nlen) != nm->len) + return -EINVAL; + if (memcmp(dent->name, nm->name, nm->len)) + return -EINVAL; + return 0; +} + +#else + +#define dbg_check_name(dent, nm) 0 + +#endif + +static struct dentry *ubifs_lookup(struct inode *dir, struct dentry *dentry, + struct nameidata *nd) +{ + int err; + union ubifs_key key; + struct inode *inode = NULL; + struct ubifs_dent_node *dent; + struct ubifs_info *c = dir->i_sb->s_fs_info; + + dbg_gen("'%.*s' in dir ino %lu", + dentry->d_name.len, dentry->d_name.name, dir->i_ino); + + if (dentry->d_name.len > UBIFS_MAX_NLEN) + return ERR_PTR(-ENAMETOOLONG); + + dent = kmalloc(UBIFS_MAX_DENT_NODE_SZ, GFP_NOFS); + if (!dent) + return ERR_PTR(-ENOMEM); + + dent_key_init(c, &key, dir->i_ino, &dentry->d_name); + + err = ubifs_tnc_lookup_nm(c, &key, dent, &dentry->d_name); + if (err) { + /* + * Do not hash the direntry if parent 'i_nlink' is zero, because + * this has side-effects - '->delete_inode()' call will not be + * called for the parent orphan inode, because 'd_count' of its + * direntry will stay 1 (it'll be negative direntry I guess) + * and prevent 'iput_final()' until the dentry is destroyed due + * to unmount or memory pressure. + */ + if (err == -ENOENT && dir->i_nlink != 0) { + dbg_gen("not found"); + goto done; + } + goto out; + } + + if (dbg_check_name(dent, &dentry->d_name)) { + err = -EINVAL; + goto out; + } + + inode = ubifs_iget(dir->i_sb, le64_to_cpu(dent->inum)); + if (IS_ERR(inode)) { + /* + * This should not happen. Probably the file-system needs + * checking. + */ + err = PTR_ERR(inode); + ubifs_err("dead directory entry '%.*s', error %d", + dentry->d_name.len, dentry->d_name.name, err); + ubifs_ro_mode(c, err); + goto out; + } + +done: + kfree(dent); + /* + * Note, d_splice_alias() would be required instead if we supported + * NFS. + */ + d_add(dentry, inode); + return NULL; + +out: + kfree(dent); + return ERR_PTR(err); +} + +static int ubifs_create(struct inode *dir, struct dentry *dentry, int mode, + struct nameidata *nd) +{ + struct inode *inode; + struct ubifs_info *c = dir->i_sb->s_fs_info; + int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len); + struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1, + .dirtied_ino = 1 }; + struct ubifs_inode *dir_ui = ubifs_inode(dir); + + /* + * Budget request settings: new inode, new direntry, changing the + * parent directory inode. + */ + + dbg_gen("dent '%.*s', mode %#x in dir ino %lu", + dentry->d_name.len, dentry->d_name.name, mode, dir->i_ino); + + err = ubifs_budget_space(c, &req); + if (err) + return err; + + inode = ubifs_new_inode(c, dir, mode); + if (IS_ERR(inode)) { + err = PTR_ERR(inode); + goto out_budg; + } + + mutex_lock(&dir_ui->ui_mutex); + dir->i_size += sz_change; + dir_ui->ui_size = dir->i_size; + dir->i_mtime = dir->i_ctime = inode->i_ctime; + err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0); + if (err) + goto out_cancel; + mutex_unlock(&dir_ui->ui_mutex); + + ubifs_release_budget(c, &req); + insert_inode_hash(inode); + d_instantiate(dentry, inode); + return 0; + +out_cancel: + dir->i_size -= sz_change; + dir_ui->ui_size = dir->i_size; + mutex_unlock(&dir_ui->ui_mutex); + make_bad_inode(inode); + iput(inode); +out_budg: + ubifs_release_budget(c, &req); + ubifs_err("cannot create regular file, error %d", err); + return err; +} + +/** + * vfs_dent_type - get VFS directory entry type. + * @type: UBIFS directory entry type + * + * This function converts UBIFS directory entry type into VFS directory entry + * type. + */ +static unsigned int vfs_dent_type(uint8_t type) +{ + switch (type) { + case UBIFS_ITYPE_REG: + return DT_REG; + case UBIFS_ITYPE_DIR: + return DT_DIR; + case UBIFS_ITYPE_LNK: + return DT_LNK; + case UBIFS_ITYPE_BLK: + return DT_BLK; + case UBIFS_ITYPE_CHR: + return DT_CHR; + case UBIFS_ITYPE_FIFO: + return DT_FIFO; + case UBIFS_ITYPE_SOCK: + return DT_SOCK; + default: + BUG(); + } + return 0; +} + +/* + * The classical Unix view for directory is that it is a linear array of + * (name, inode number) entries. Linux/VFS assumes this model as well. + * Particularly, 'readdir()' call wants us to return a directory entry offset + * which later may be used to continue 'readdir()'ing the directory or to + * 'seek()' to that specific direntry. Obviously UBIFS does not really fit this + * model because directory entries are identified by keys, which may collide. + * + * UBIFS uses directory entry hash value for directory offsets, so + * 'seekdir()'/'telldir()' may not always work because of possible key + * collisions. But UBIFS guarantees that consecutive 'readdir()' calls work + * properly by means of saving full directory entry name in the private field + * of the file description object. + * + * This means that UBIFS cannot support NFS which requires full + * 'seekdir()'/'telldir()' support. + */ +static int ubifs_readdir(struct file *file, void *dirent, filldir_t filldir) +{ + int err, over = 0; + struct qstr nm; + union ubifs_key key; + struct ubifs_dent_node *dent; + struct inode *dir = file->f_path.dentry->d_inode; + struct ubifs_info *c = dir->i_sb->s_fs_info; + + dbg_gen("dir ino %lu, f_pos %#llx", dir->i_ino, file->f_pos); + + if (file->f_pos > UBIFS_S_KEY_HASH_MASK || file->f_pos == 2) + /* + * The directory was seek'ed to a senseless position or there + * are no more entries. + */ + return 0; + + /* File positions 0 and 1 correspond to "." and ".." */ + if (file->f_pos == 0) { + ubifs_assert(!file->private_data); + over = filldir(dirent, ".", 1, 0, dir->i_ino, DT_DIR); + if (over) + return 0; + file->f_pos = 1; + } + + if (file->f_pos == 1) { + ubifs_assert(!file->private_data); + over = filldir(dirent, "..", 2, 1, + parent_ino(file->f_path.dentry), DT_DIR); + if (over) + return 0; + + /* Find the first entry in TNC and save it */ + lowest_dent_key(c, &key, dir->i_ino); + nm.name = NULL; + dent = ubifs_tnc_next_ent(c, &key, &nm); + if (IS_ERR(dent)) { + err = PTR_ERR(dent); + goto out; + } + + file->f_pos = key_hash_flash(c, &dent->key); + file->private_data = dent; + } + + dent = file->private_data; + if (!dent) { + /* + * The directory was seek'ed to and is now readdir'ed. + * Find the entry corresponding to @file->f_pos or the + * closest one. + */ + dent_key_init_hash(c, &key, dir->i_ino, file->f_pos); + nm.name = NULL; + dent = ubifs_tnc_next_ent(c, &key, &nm); + if (IS_ERR(dent)) { + err = PTR_ERR(dent); + goto out; + } + file->f_pos = key_hash_flash(c, &dent->key); + file->private_data = dent; + } + + while (1) { + dbg_gen("feed '%s', ino %llu, new f_pos %#x", + dent->name, le64_to_cpu(dent->inum), + key_hash_flash(c, &dent->key)); + ubifs_assert(dent->ch.sqnum > ubifs_inode(dir)->creat_sqnum); + + nm.len = le16_to_cpu(dent->nlen); + over = filldir(dirent, dent->name, nm.len, file->f_pos, + le64_to_cpu(dent->inum), + vfs_dent_type(dent->type)); + if (over) + return 0; + + /* Switch to the next entry */ + key_read(c, &dent->key, &key); + nm.name = dent->name; + dent = ubifs_tnc_next_ent(c, &key, &nm); + if (IS_ERR(dent)) { + err = PTR_ERR(dent); + goto out; + } + + kfree(file->private_data); + file->f_pos = key_hash_flash(c, &dent->key); + file->private_data = dent; + cond_resched(); + } + +out: + if (err != -ENOENT) { + ubifs_err("cannot find next direntry, error %d", err); + return err; + } + + kfree(file->private_data); + file->private_data = NULL; + file->f_pos = 2; + return 0; +} + +/* If a directory is seeked, we have to free saved readdir() state */ +static loff_t ubifs_dir_llseek(struct file *file, loff_t offset, int origin) +{ + kfree(file->private_data); + file->private_data = NULL; + return generic_file_llseek(file, offset, origin); +} + +/* Free saved readdir() state when the directory is closed */ +static int ubifs_dir_release(struct inode *dir, struct file *file) +{ + kfree(file->private_data); + file->private_data = NULL; + return 0; +} + +/** + * lock_2_inodes - lock two UBIFS inodes. + * @inode1: first inode + * @inode2: second inode + */ +static void lock_2_inodes(struct inode *inode1, struct inode *inode2) +{ + if (inode1->i_ino < inode2->i_ino) { + mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_2); + mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_3); + } else { + mutex_lock_nested(&ubifs_inode(inode2)->ui_mutex, WB_MUTEX_2); + mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_3); + } +} + +/** + * unlock_2_inodes - unlock two UBIFS inodes inodes. + * @inode1: first inode + * @inode2: second inode + */ +static void unlock_2_inodes(struct inode *inode1, struct inode *inode2) +{ + mutex_unlock(&ubifs_inode(inode1)->ui_mutex); + mutex_unlock(&ubifs_inode(inode2)->ui_mutex); +} + +static int ubifs_link(struct dentry *old_dentry, struct inode *dir, + struct dentry *dentry) +{ + struct ubifs_info *c = dir->i_sb->s_fs_info; + struct inode *inode = old_dentry->d_inode; + struct ubifs_inode *ui = ubifs_inode(inode); + struct ubifs_inode *dir_ui = ubifs_inode(dir); + int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len); + struct ubifs_budget_req req = { .new_dent = 1, .dirtied_ino = 2, + .dirtied_ino_d = ui->data_len }; + + /* + * Budget request settings: new direntry, changing the target inode, + * changing the parent inode. + */ + + dbg_gen("dent '%.*s' to ino %lu (nlink %d) in dir ino %lu", + dentry->d_name.len, dentry->d_name.name, inode->i_ino, + inode->i_nlink, dir->i_ino); + err = dbg_check_synced_i_size(inode); + if (err) + return err; + + err = ubifs_budget_space(c, &req); + if (err) + return err; + + lock_2_inodes(dir, inode); + inc_nlink(inode); + atomic_inc(&inode->i_count); + inode->i_ctime = ubifs_current_time(inode); + dir->i_size += sz_change; + dir_ui->ui_size = dir->i_size; + dir->i_mtime = dir->i_ctime = inode->i_ctime; + err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0); + if (err) + goto out_cancel; + unlock_2_inodes(dir, inode); + + ubifs_release_budget(c, &req); + d_instantiate(dentry, inode); + return 0; + +out_cancel: + dir->i_size -= sz_change; + dir_ui->ui_size = dir->i_size; + drop_nlink(inode); + unlock_2_inodes(dir, inode); + ubifs_release_budget(c, &req); + iput(inode); + return err; +} + +static int ubifs_unlink(struct inode *dir, struct dentry *dentry) +{ + struct ubifs_info *c = dir->i_sb->s_fs_info; + struct inode *inode = dentry->d_inode; + struct ubifs_inode *dir_ui = ubifs_inode(dir); + int sz_change = CALC_DENT_SIZE(dentry->d_name.len); + int err, budgeted = 1; + struct ubifs_budget_req req = { .mod_dent = 1, .dirtied_ino = 2 }; + + /* + * Budget request settings: deletion direntry, deletion inode (+1 for + * @dirtied_ino), changing the parent directory inode. If budgeting + * fails, go ahead anyway because we have extra space reserved for + * deletions. + */ + + dbg_gen("dent '%.*s' from ino %lu (nlink %d) in dir ino %lu", + dentry->d_name.len, dentry->d_name.name, inode->i_ino, + inode->i_nlink, dir->i_ino); + err = dbg_check_synced_i_size(inode); + if (err) + return err; + + err = ubifs_budget_space(c, &req); + if (err) { + if (err != -ENOSPC) + return err; + err = 0; + budgeted = 0; + } + + lock_2_inodes(dir, inode); + inode->i_ctime = ubifs_current_time(dir); + drop_nlink(inode); + dir->i_size -= sz_change; + dir_ui->ui_size = dir->i_size; + dir->i_mtime = dir->i_ctime = inode->i_ctime; + err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 1, 0); + if (err) + goto out_cancel; + unlock_2_inodes(dir, inode); + + if (budgeted) + ubifs_release_budget(c, &req); + else { + /* We've deleted something - clean the "no space" flags */ + c->nospace = c->nospace_rp = 0; + smp_wmb(); + } + return 0; + +out_cancel: + dir->i_size += sz_change; + dir_ui->ui_size = dir->i_size; + inc_nlink(inode); + unlock_2_inodes(dir, inode); + if (budgeted) + ubifs_release_budget(c, &req); + return err; +} + +/** + * check_dir_empty - check if a directory is empty or not. + * @c: UBIFS file-system description object + * @dir: VFS inode object of the directory to check + * + * This function checks if directory @dir is empty. Returns zero if the + * directory is empty, %-ENOTEMPTY if it is not, and other negative error codes + * in case of of errors. + */ +static int check_dir_empty(struct ubifs_info *c, struct inode *dir) +{ + struct qstr nm = { .name = NULL }; + struct ubifs_dent_node *dent; + union ubifs_key key; + int err; + + lowest_dent_key(c, &key, dir->i_ino); + dent = ubifs_tnc_next_ent(c, &key, &nm); + if (IS_ERR(dent)) { + err = PTR_ERR(dent); + if (err == -ENOENT) + err = 0; + } else { + kfree(dent); + err = -ENOTEMPTY; + } + return err; +} + +static int ubifs_rmdir(struct inode *dir, struct dentry *dentry) +{ + struct ubifs_info *c = dir->i_sb->s_fs_info; + struct inode *inode = dentry->d_inode; + int sz_change = CALC_DENT_SIZE(dentry->d_name.len); + int err, budgeted = 1; + struct ubifs_inode *dir_ui = ubifs_inode(dir); + struct ubifs_budget_req req = { .mod_dent = 1, .dirtied_ino = 2 }; + + /* + * Budget request settings: deletion direntry, deletion inode and + * changing the parent inode. If budgeting fails, go ahead anyway + * because we have extra space reserved for deletions. + */ + + dbg_gen("directory '%.*s', ino %lu in dir ino %lu", dentry->d_name.len, + dentry->d_name.name, inode->i_ino, dir->i_ino); + + err = check_dir_empty(c, dentry->d_inode); + if (err) + return err; + + err = ubifs_budget_space(c, &req); + if (err) { + if (err != -ENOSPC) + return err; + budgeted = 0; + } + + lock_2_inodes(dir, inode); + inode->i_ctime = ubifs_current_time(dir); + clear_nlink(inode); + drop_nlink(dir); + dir->i_size -= sz_change; + dir_ui->ui_size = dir->i_size; + dir->i_mtime = dir->i_ctime = inode->i_ctime; + err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 1, 0); + if (err) + goto out_cancel; + unlock_2_inodes(dir, inode); + + if (budgeted) + ubifs_release_budget(c, &req); + else { + /* We've deleted something - clean the "no space" flags */ + c->nospace = c->nospace_rp = 0; + smp_wmb(); + } + return 0; + +out_cancel: + dir->i_size += sz_change; + dir_ui->ui_size = dir->i_size; + inc_nlink(dir); + inc_nlink(inode); + inc_nlink(inode); + unlock_2_inodes(dir, inode); + if (budgeted) + ubifs_release_budget(c, &req); + return err; +} + +static int ubifs_mkdir(struct inode *dir, struct dentry *dentry, int mode) +{ + struct inode *inode; + struct ubifs_inode *dir_ui = ubifs_inode(dir); + struct ubifs_info *c = dir->i_sb->s_fs_info; + int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len); + struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1, + .dirtied_ino_d = 1 }; + + /* + * Budget request settings: new inode, new direntry and changing parent + * directory inode. + */ + + dbg_gen("dent '%.*s', mode %#x in dir ino %lu", + dentry->d_name.len, dentry->d_name.name, mode, dir->i_ino); + + err = ubifs_budget_space(c, &req); + if (err) + return err; + + inode = ubifs_new_inode(c, dir, S_IFDIR | mode); + if (IS_ERR(inode)) { + err = PTR_ERR(inode); + goto out_budg; + } + + mutex_lock(&dir_ui->ui_mutex); + insert_inode_hash(inode); + inc_nlink(inode); + inc_nlink(dir); + dir->i_size += sz_change; + dir_ui->ui_size = dir->i_size; + dir->i_mtime = dir->i_ctime = inode->i_ctime; + err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0); + if (err) { + ubifs_err("cannot create directory, error %d", err); + goto out_cancel; + } + mutex_unlock(&dir_ui->ui_mutex); + + ubifs_release_budget(c, &req); + d_instantiate(dentry, inode); + return 0; + +out_cancel: + dir->i_size -= sz_change; + dir_ui->ui_size = dir->i_size; + drop_nlink(dir); + mutex_unlock(&dir_ui->ui_mutex); + make_bad_inode(inode); + iput(inode); +out_budg: + ubifs_release_budget(c, &req); + return err; +} + +static int ubifs_mknod(struct inode *dir, struct dentry *dentry, + int mode, dev_t rdev) +{ + struct inode *inode; + struct ubifs_inode *ui; + struct ubifs_inode *dir_ui = ubifs_inode(dir); + struct ubifs_info *c = dir->i_sb->s_fs_info; + union ubifs_dev_desc *dev = NULL; + int sz_change = CALC_DENT_SIZE(dentry->d_name.len); + int err, devlen = 0; + struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1, + .new_ino_d = devlen, .dirtied_ino = 1 }; + + /* + * Budget request settings: new inode, new direntry and changing parent + * directory inode. + */ + + dbg_gen("dent '%.*s' in dir ino %lu", + dentry->d_name.len, dentry->d_name.name, dir->i_ino); + + if (!new_valid_dev(rdev)) + return -EINVAL; + + if (S_ISBLK(mode) || S_ISCHR(mode)) { + dev = kmalloc(sizeof(union ubifs_dev_desc), GFP_NOFS); + if (!dev) + return -ENOMEM; + devlen = ubifs_encode_dev(dev, rdev); + } + + err = ubifs_budget_space(c, &req); + if (err) { + kfree(dev); + return err; + } + + inode = ubifs_new_inode(c, dir, mode); + if (IS_ERR(inode)) { + kfree(dev); + err = PTR_ERR(inode); + goto out_budg; + } + + init_special_inode(inode, inode->i_mode, rdev); + inode->i_size = ubifs_inode(inode)->ui_size = devlen; + ui = ubifs_inode(inode); + ui->data = dev; + ui->data_len = devlen; + + mutex_lock(&dir_ui->ui_mutex); + dir->i_size += sz_change; + dir_ui->ui_size = dir->i_size; + dir->i_mtime = dir->i_ctime = inode->i_ctime; + err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0); + if (err) + goto out_cancel; + mutex_unlock(&dir_ui->ui_mutex); + + ubifs_release_budget(c, &req); + insert_inode_hash(inode); + d_instantiate(dentry, inode); + return 0; + +out_cancel: + dir->i_size -= sz_change; + dir_ui->ui_size = dir->i_size; + mutex_unlock(&dir_ui->ui_mutex); + make_bad_inode(inode); + iput(inode); +out_budg: + ubifs_release_budget(c, &req); + return err; +} + +static int ubifs_symlink(struct inode *dir, struct dentry *dentry, + const char *symname) +{ + struct inode *inode; + struct ubifs_inode *ui; + struct ubifs_inode *dir_ui = ubifs_inode(dir); + struct ubifs_info *c = dir->i_sb->s_fs_info; + int err, len = strlen(symname); + int sz_change = CALC_DENT_SIZE(dentry->d_name.len); + struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1, + .new_ino_d = len, .dirtied_ino = 1 }; + + /* + * Budget request settings: new inode, new direntry and changing parent + * directory inode. + */ + + dbg_gen("dent '%.*s', target '%s' in dir ino %lu", dentry->d_name.len, + dentry->d_name.name, symname, dir->i_ino); + + if (len > UBIFS_MAX_INO_DATA) + return -ENAMETOOLONG; + + err = ubifs_budget_space(c, &req); + if (err) + return err; + + inode = ubifs_new_inode(c, dir, S_IFLNK | S_IRWXUGO); + if (IS_ERR(inode)) { + err = PTR_ERR(inode); + goto out_budg; + } + + ui = ubifs_inode(inode); + ui->data = kmalloc(len + 1, GFP_NOFS); + if (!ui->data) { + err = -ENOMEM; + goto out_inode; + } + + memcpy(ui->data, symname, len); + ((char *)ui->data)[len] = '\0'; + /* + * The terminating zero byte is not written to the flash media and it + * is put just to make later in-memory string processing simpler. Thus, + * data length is @len, not @len + %1. + */ + ui->data_len = len; + inode->i_size = ubifs_inode(inode)->ui_size = len; + + mutex_lock(&dir_ui->ui_mutex); + dir->i_size += sz_change; + dir_ui->ui_size = dir->i_size; + dir->i_mtime = dir->i_ctime = inode->i_ctime; + err = ubifs_jnl_update(c, dir, &dentry->d_name, inode, 0, 0); + if (err) + goto out_cancel; + mutex_unlock(&dir_ui->ui_mutex); + + ubifs_release_budget(c, &req); + insert_inode_hash(inode); + d_instantiate(dentry, inode); + return 0; + +out_cancel: + dir->i_size -= sz_change; + dir_ui->ui_size = dir->i_size; + mutex_unlock(&dir_ui->ui_mutex); +out_inode: + make_bad_inode(inode); + iput(inode); +out_budg: + ubifs_release_budget(c, &req); + return err; +} + +/** + * lock_3_inodes - lock three UBIFS inodes for rename. + * @inode1: first inode + * @inode2: second inode + * @inode3: third inode + * + * For 'ubifs_rename()', @inode1 may be the same as @inode2 whereas @inode3 may + * be null. + */ +static void lock_3_inodes(struct inode *inode1, struct inode *inode2, + struct inode *inode3) +{ + struct inode *i1, *i2, *i3; + + if (!inode3) { + if (inode1 != inode2) { + lock_2_inodes(inode1, inode2); + return; + } + mutex_lock_nested(&ubifs_inode(inode1)->ui_mutex, WB_MUTEX_1); + return; + } + + if (inode1 == inode2) { + lock_2_inodes(inode1, inode3); + return; + } + + /* 3 different inodes */ + if (inode1 < inode2) { + i3 = inode2; + if (inode1 < inode3) { + i1 = inode1; + i2 = inode3; + } else { + i1 = inode3; + i2 = inode1; + } + } else { + i3 = inode1; + if (inode2 < inode3) { + i1 = inode2; + i2 = inode3; + } else { + i1 = inode3; + i2 = inode2; + } + } + mutex_lock_nested(&ubifs_inode(i1)->ui_mutex, WB_MUTEX_1); + lock_2_inodes(i2, i3); +} + +/** + * unlock_3_inodes - unlock three UBIFS inodes for rename. + * @inode1: first inode + * @inode2: second inode + * @inode3: third inode + */ +static void unlock_3_inodes(struct inode *inode1, struct inode *inode2, + struct inode *inode3) +{ + mutex_unlock(&ubifs_inode(inode1)->ui_mutex); + if (inode1 != inode2) + mutex_unlock(&ubifs_inode(inode2)->ui_mutex); + if (inode3) + mutex_unlock(&ubifs_inode(inode3)->ui_mutex); +} + +static int ubifs_rename(struct inode *old_dir, struct dentry *old_dentry, + struct inode *new_dir, struct dentry *new_dentry) +{ + struct ubifs_info *c = old_dir->i_sb->s_fs_info; + struct inode *old_inode = old_dentry->d_inode; + struct inode *new_inode = new_dentry->d_inode; + struct ubifs_inode *old_inode_ui = ubifs_inode(old_inode); + int err, release, sync = 0, move = (new_dir != old_dir); + int is_dir = S_ISDIR(old_inode->i_mode); + int unlink = !!new_inode; + int new_sz = CALC_DENT_SIZE(new_dentry->d_name.len); + int old_sz = CALC_DENT_SIZE(old_dentry->d_name.len); + struct ubifs_budget_req req = { .new_dent = 1, .mod_dent = 1, + .dirtied_ino = 3 }; + struct ubifs_budget_req ino_req = { .dirtied_ino = 1, + .dirtied_ino_d = old_inode_ui->data_len }; + struct timespec time; + + /* + * Budget request settings: deletion direntry, new direntry, removing + * the old inode, and changing old and new parent directory inodes. + * + * However, this operation also marks the target inode as dirty and + * does not write it, so we allocate budget for the target inode + * separately. + */ + + dbg_gen("dent '%.*s' ino %lu in dir ino %lu to dent '%.*s' in " + "dir ino %lu", old_dentry->d_name.len, old_dentry->d_name.name, + old_inode->i_ino, old_dir->i_ino, new_dentry->d_name.len, + new_dentry->d_name.name, new_dir->i_ino); + + if (unlink && is_dir) { + err = check_dir_empty(c, new_inode); + if (err) + return err; + } + + err = ubifs_budget_space(c, &req); + if (err) + return err; + err = ubifs_budget_space(c, &ino_req); + if (err) { + ubifs_release_budget(c, &req); + return err; + } + + lock_3_inodes(old_dir, new_dir, new_inode); + + /* + * Like most other Unix systems, set the @i_ctime for inodes on a + * rename. + */ + time = ubifs_current_time(old_dir); + old_inode->i_ctime = time; + + /* We must adjust parent link count when renaming directories */ + if (is_dir) { + if (move) { + /* + * @old_dir loses a link because we are moving + * @old_inode to a different directory. + */ + drop_nlink(old_dir); + /* + * @new_dir only gains a link if we are not also + * overwriting an existing directory. + */ + if (!unlink) + inc_nlink(new_dir); + } else { + /* + * @old_inode is not moving to a different directory, + * but @old_dir still loses a link if we are + * overwriting an existing directory. + */ + if (unlink) + drop_nlink(old_dir); + } + } + + old_dir->i_size -= old_sz; + ubifs_inode(old_dir)->ui_size = old_dir->i_size; + old_dir->i_mtime = old_dir->i_ctime = time; + new_dir->i_mtime = new_dir->i_ctime = time; + + /* + * And finally, if we unlinked a direntry which happened to have the + * same name as the moved direntry, we have to decrement @i_nlink of + * the unlinked inode and change its ctime. + */ + if (unlink) { + /* + * Directories cannot have hard-links, so if this is a + * directory, decrement its @i_nlink twice because an empty + * directory has @i_nlink 2. + */ + if (is_dir) + drop_nlink(new_inode); + new_inode->i_ctime = time; + drop_nlink(new_inode); + } else { + new_dir->i_size += new_sz; + ubifs_inode(new_dir)->ui_size = new_dir->i_size; + } + + /* + * Do not ask 'ubifs_jnl_rename()' to flush write-buffer if @old_inode + * is dirty, because this will be done later on at the end of + * 'ubifs_rename()'. + */ + if (IS_SYNC(old_inode)) { + sync = IS_DIRSYNC(old_dir) || IS_DIRSYNC(new_dir); + if (unlink && IS_SYNC(new_inode)) + sync = 1; + } + err = ubifs_jnl_rename(c, old_dir, old_dentry, new_dir, new_dentry, + sync); + if (err) + goto out_cancel; + + unlock_3_inodes(old_dir, new_dir, new_inode); + ubifs_release_budget(c, &req); + + mutex_lock(&old_inode_ui->ui_mutex); + release = old_inode_ui->dirty; + mark_inode_dirty_sync(old_inode); + mutex_unlock(&old_inode_ui->ui_mutex); + + if (release) + ubifs_release_budget(c, &ino_req); + if (IS_SYNC(old_inode)) + err = old_inode->i_sb->s_op->write_inode(old_inode, 1); + return err; + +out_cancel: + if (unlink) { + if (is_dir) + inc_nlink(new_inode); + inc_nlink(new_inode); + } else { + new_dir->i_size -= new_sz; + ubifs_inode(new_dir)->ui_size = new_dir->i_size; + } + old_dir->i_size += old_sz; + ubifs_inode(old_dir)->ui_size = old_dir->i_size; + if (is_dir) { + if (move) { + inc_nlink(old_dir); + if (!unlink) + drop_nlink(new_dir); + } else { + if (unlink) + inc_nlink(old_dir); + } + } + unlock_3_inodes(old_dir, new_dir, new_inode); + ubifs_release_budget(c, &ino_req); + ubifs_release_budget(c, &req); + return err; +} + +int ubifs_getattr(struct vfsmount *mnt, struct dentry *dentry, + struct kstat *stat) +{ + loff_t size; + struct inode *inode = dentry->d_inode; + struct ubifs_inode *ui = ubifs_inode(inode); + + mutex_lock(&ui->ui_mutex); + stat->dev = inode->i_sb->s_dev; + stat->ino = inode->i_ino; + stat->mode = inode->i_mode; + stat->nlink = inode->i_nlink; + stat->uid = inode->i_uid; + stat->gid = inode->i_gid; + stat->rdev = inode->i_rdev; + stat->atime = inode->i_atime; + stat->mtime = inode->i_mtime; + stat->ctime = inode->i_ctime; + stat->blksize = UBIFS_BLOCK_SIZE; + stat->size = ui->ui_size; + + /* + * Unfortunately, the 'stat()' system call was designed for block + * device based file systems, and it is not appropriate for UBIFS, + * because UBIFS does not have notion of "block". For example, it is + * difficult to tell how many block a directory takes - it actually + * takes less than 300 bytes, but we have to round it to block size, + * which introduces large mistake. This makes utilities like 'du' to + * report completely senseless numbers. This is the reason why UBIFS + * goes the same way as JFFS2 - it reports zero blocks for everything + * but regular files, which makes more sense than reporting completely + * wrong sizes. + */ + if (S_ISREG(inode->i_mode)) { + size = ui->xattr_size; + size += stat->size; + size = ALIGN(size, UBIFS_BLOCK_SIZE); + /* + * Note, user-space expects 512-byte blocks count irrespectively + * of what was reported in @stat->size. + */ + stat->blocks = size >> 9; + } else + stat->blocks = 0; + mutex_unlock(&ui->ui_mutex); + return 0; +} + +struct inode_operations ubifs_dir_inode_operations = { + .lookup = ubifs_lookup, + .create = ubifs_create, + .link = ubifs_link, + .symlink = ubifs_symlink, + .unlink = ubifs_unlink, + .mkdir = ubifs_mkdir, + .rmdir = ubifs_rmdir, + .mknod = ubifs_mknod, + .rename = ubifs_rename, + .setattr = ubifs_setattr, + .getattr = ubifs_getattr, +#ifdef CONFIG_UBIFS_FS_XATTR + .setxattr = ubifs_setxattr, + .getxattr = ubifs_getxattr, + .listxattr = ubifs_listxattr, + .removexattr = ubifs_removexattr, +#endif +}; + +struct file_operations ubifs_dir_operations = { + .llseek = ubifs_dir_llseek, + .release = ubifs_dir_release, + .read = generic_read_dir, + .readdir = ubifs_readdir, + .fsync = ubifs_fsync, + .unlocked_ioctl = ubifs_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = ubifs_compat_ioctl, +#endif +}; diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c new file mode 100644 index 000000000000..005a3b854d96 --- /dev/null +++ b/fs/ubifs/file.c @@ -0,0 +1,1275 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* + * This file implements VFS file and inode operations of regular files, device + * nodes and symlinks as well as address space operations. + * + * UBIFS uses 2 page flags: PG_private and PG_checked. PG_private is set if the + * page is dirty and is used for budgeting purposes - dirty pages should not be + * budgeted. The PG_checked flag is set if full budgeting is required for the + * page e.g., when it corresponds to a file hole or it is just beyond the file + * size. The budgeting is done in 'ubifs_write_begin()', because it is OK to + * fail in this function, and the budget is released in 'ubifs_write_end()'. So + * the PG_private and PG_checked flags carry the information about how the page + * was budgeted, to make it possible to release the budget properly. + * + * A thing to keep in mind: inode's 'i_mutex' is locked in most VFS operations + * we implement. However, this is not true for '->writepage()', which might be + * called with 'i_mutex' unlocked. For example, when pdflush is performing + * write-back, it calls 'writepage()' with unlocked 'i_mutex', although the + * inode has 'I_LOCK' flag in this case. At "normal" work-paths 'i_mutex' is + * locked in '->writepage', e.g. in "sys_write -> alloc_pages -> direct reclaim + * path'. So, in '->writepage()' we are only guaranteed that the page is + * locked. + * + * Similarly, 'i_mutex' does not have to be locked in readpage(), e.g., + * readahead path does not have it locked ("sys_read -> generic_file_aio_read + * -> ondemand_readahead -> readpage"). In case of readahead, 'I_LOCK' flag is + * not set as well. However, UBIFS disables readahead. + * + * This, for example means that there might be 2 concurrent '->writepage()' + * calls for the same inode, but different inode dirty pages. + */ + +#include "ubifs.h" +#include + +static int read_block(struct inode *inode, void *addr, unsigned int block, + struct ubifs_data_node *dn) +{ + struct ubifs_info *c = inode->i_sb->s_fs_info; + int err, len, out_len; + union ubifs_key key; + unsigned int dlen; + + data_key_init(c, &key, inode->i_ino, block); + err = ubifs_tnc_lookup(c, &key, dn); + if (err) { + if (err == -ENOENT) + /* Not found, so it must be a hole */ + memset(addr, 0, UBIFS_BLOCK_SIZE); + return err; + } + + ubifs_assert(dn->ch.sqnum > ubifs_inode(inode)->creat_sqnum); + + len = le32_to_cpu(dn->size); + if (len <= 0 || len > UBIFS_BLOCK_SIZE) + goto dump; + + dlen = le32_to_cpu(dn->ch.len) - UBIFS_DATA_NODE_SZ; + out_len = UBIFS_BLOCK_SIZE; + err = ubifs_decompress(&dn->data, dlen, addr, &out_len, + le16_to_cpu(dn->compr_type)); + if (err || len != out_len) + goto dump; + + /* + * Data length can be less than a full block, even for blocks that are + * not the last in the file (e.g., as a result of making a hole and + * appending data). Ensure that the remainder is zeroed out. + */ + if (len < UBIFS_BLOCK_SIZE) + memset(addr + len, 0, UBIFS_BLOCK_SIZE - len); + + return 0; + +dump: + ubifs_err("bad data node (block %u, inode %lu)", + block, inode->i_ino); + dbg_dump_node(c, dn); + return -EINVAL; +} + +static int do_readpage(struct page *page) +{ + void *addr; + int err = 0, i; + unsigned int block, beyond; + struct ubifs_data_node *dn; + struct inode *inode = page->mapping->host; + loff_t i_size = i_size_read(inode); + + dbg_gen("ino %lu, pg %lu, i_size %lld, flags %#lx", + inode->i_ino, page->index, i_size, page->flags); + ubifs_assert(!PageChecked(page)); + ubifs_assert(!PagePrivate(page)); + + addr = kmap(page); + + block = page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT; + beyond = (i_size + UBIFS_BLOCK_SIZE - 1) >> UBIFS_BLOCK_SHIFT; + if (block >= beyond) { + /* Reading beyond inode */ + SetPageChecked(page); + memset(addr, 0, PAGE_CACHE_SIZE); + goto out; + } + + dn = kmalloc(UBIFS_MAX_DATA_NODE_SZ, GFP_NOFS); + if (!dn) { + err = -ENOMEM; + goto error; + } + + i = 0; + while (1) { + int ret; + + if (block >= beyond) { + /* Reading beyond inode */ + err = -ENOENT; + memset(addr, 0, UBIFS_BLOCK_SIZE); + } else { + ret = read_block(inode, addr, block, dn); + if (ret) { + err = ret; + if (err != -ENOENT) + break; + } + } + if (++i >= UBIFS_BLOCKS_PER_PAGE) + break; + block += 1; + addr += UBIFS_BLOCK_SIZE; + } + if (err) { + if (err == -ENOENT) { + /* Not found, so it must be a hole */ + SetPageChecked(page); + dbg_gen("hole"); + goto out_free; + } + ubifs_err("cannot read page %lu of inode %lu, error %d", + page->index, inode->i_ino, err); + goto error; + } + +out_free: + kfree(dn); +out: + SetPageUptodate(page); + ClearPageError(page); + flush_dcache_page(page); + kunmap(page); + return 0; + +error: + kfree(dn); + ClearPageUptodate(page); + SetPageError(page); + flush_dcache_page(page); + kunmap(page); + return err; +} + +/** + * release_new_page_budget - release budget of a new page. + * @c: UBIFS file-system description object + * + * This is a helper function which releases budget corresponding to the budget + * of one new page of data. + */ +static void release_new_page_budget(struct ubifs_info *c) +{ + struct ubifs_budget_req req = { .recalculate = 1, .new_page = 1 }; + + ubifs_release_budget(c, &req); +} + +/** + * release_existing_page_budget - release budget of an existing page. + * @c: UBIFS file-system description object + * + * This is a helper function which releases budget corresponding to the budget + * of changing one one page of data which already exists on the flash media. + */ +static void release_existing_page_budget(struct ubifs_info *c) +{ + struct ubifs_budget_req req = { .dd_growth = c->page_budget}; + + ubifs_release_budget(c, &req); +} + +static int write_begin_slow(struct address_space *mapping, + loff_t pos, unsigned len, struct page **pagep) +{ + struct inode *inode = mapping->host; + struct ubifs_info *c = inode->i_sb->s_fs_info; + pgoff_t index = pos >> PAGE_CACHE_SHIFT; + struct ubifs_budget_req req = { .new_page = 1 }; + int uninitialized_var(err), appending = !!(pos + len > inode->i_size); + struct page *page; + + dbg_gen("ino %lu, pos %llu, len %u, i_size %lld", + inode->i_ino, pos, len, inode->i_size); + + /* + * At the slow path we have to budget before locking the page, because + * budgeting may force write-back, which would wait on locked pages and + * deadlock if we had the page locked. At this point we do not know + * anything about the page, so assume that this is a new page which is + * written to a hole. This corresponds to largest budget. Later the + * budget will be amended if this is not true. + */ + if (appending) + /* We are appending data, budget for inode change */ + req.dirtied_ino = 1; + + err = ubifs_budget_space(c, &req); + if (unlikely(err)) + return err; + + page = __grab_cache_page(mapping, index); + if (unlikely(!page)) { + ubifs_release_budget(c, &req); + return -ENOMEM; + } + + if (!PageUptodate(page)) { + if (!(pos & PAGE_CACHE_MASK) && len == PAGE_CACHE_SIZE) + SetPageChecked(page); + else { + err = do_readpage(page); + if (err) { + unlock_page(page); + page_cache_release(page); + return err; + } + } + + SetPageUptodate(page); + ClearPageError(page); + } + + if (PagePrivate(page)) + /* + * The page is dirty, which means it was budgeted twice: + * o first time the budget was allocated by the task which + * made the page dirty and set the PG_private flag; + * o and then we budgeted for it for the second time at the + * very beginning of this function. + * + * So what we have to do is to release the page budget we + * allocated. + */ + release_new_page_budget(c); + else if (!PageChecked(page)) + /* + * We are changing a page which already exists on the media. + * This means that changing the page does not make the amount + * of indexing information larger, and this part of the budget + * which we have already acquired may be released. + */ + ubifs_convert_page_budget(c); + + if (appending) { + struct ubifs_inode *ui = ubifs_inode(inode); + + /* + * 'ubifs_write_end()' is optimized from the fast-path part of + * 'ubifs_write_begin()' and expects the @ui_mutex to be locked + * if data is appended. + */ + mutex_lock(&ui->ui_mutex); + if (ui->dirty) + /* + * The inode is dirty already, so we may free the + * budget we allocated. + */ + ubifs_release_dirty_inode_budget(c, ui); + } + + *pagep = page; + return 0; +} + +/** + * allocate_budget - allocate budget for 'ubifs_write_begin()'. + * @c: UBIFS file-system description object + * @page: page to allocate budget for + * @ui: UBIFS inode object the page belongs to + * @appending: non-zero if the page is appended + * + * This is a helper function for 'ubifs_write_begin()' which allocates budget + * for the operation. The budget is allocated differently depending on whether + * this is appending, whether the page is dirty or not, and so on. This + * function leaves the @ui->ui_mutex locked in case of appending. Returns zero + * in case of success and %-ENOSPC in case of failure. + */ +static int allocate_budget(struct ubifs_info *c, struct page *page, + struct ubifs_inode *ui, int appending) +{ + struct ubifs_budget_req req = { .fast = 1 }; + + if (PagePrivate(page)) { + if (!appending) + /* + * The page is dirty and we are not appending, which + * means no budget is needed at all. + */ + return 0; + + mutex_lock(&ui->ui_mutex); + if (ui->dirty) + /* + * The page is dirty and we are appending, so the inode + * has to be marked as dirty. However, it is already + * dirty, so we do not need any budget. We may return, + * but @ui->ui_mutex hast to be left locked because we + * should prevent write-back from flushing the inode + * and freeing the budget. The lock will be released in + * 'ubifs_write_end()'. + */ + return 0; + + /* + * The page is dirty, we are appending, the inode is clean, so + * we need to budget the inode change. + */ + req.dirtied_ino = 1; + } else { + if (PageChecked(page)) + /* + * The page corresponds to a hole and does not + * exist on the media. So changing it makes + * make the amount of indexing information + * larger, and we have to budget for a new + * page. + */ + req.new_page = 1; + else + /* + * Not a hole, the change will not add any new + * indexing information, budget for page + * change. + */ + req.dirtied_page = 1; + + if (appending) { + mutex_lock(&ui->ui_mutex); + if (!ui->dirty) + /* + * The inode is clean but we will have to mark + * it as dirty because we are appending. This + * needs a budget. + */ + req.dirtied_ino = 1; + } + } + + return ubifs_budget_space(c, &req); +} + +/* + * This function is called when a page of data is going to be written. Since + * the page of data will not necessarily go to the flash straight away, UBIFS + * has to reserve space on the media for it, which is done by means of + * budgeting. + * + * This is the hot-path of the file-system and we are trying to optimize it as + * much as possible. For this reasons it is split on 2 parts - slow and fast. + * + * There many budgeting cases: + * o a new page is appended - we have to budget for a new page and for + * changing the inode; however, if the inode is already dirty, there is + * no need to budget for it; + * o an existing clean page is changed - we have budget for it; if the page + * does not exist on the media (a hole), we have to budget for a new + * page; otherwise, we may budget for changing an existing page; the + * difference between these cases is that changing an existing page does + * not introduce anything new to the FS indexing information, so it does + * not grow, and smaller budget is acquired in this case; + * o an existing dirty page is changed - no need to budget at all, because + * the page budget has been acquired by earlier, when the page has been + * marked dirty. + * + * UBIFS budgeting sub-system may force write-back if it thinks there is no + * space to reserve. This imposes some locking restrictions and makes it + * impossible to take into account the above cases, and makes it impossible to + * optimize budgeting. + * + * The solution for this is that the fast path of 'ubifs_write_begin()' assumes + * there is a plenty of flash space and the budget will be acquired quickly, + * without forcing write-back. The slow path does not make this assumption. + */ +static int ubifs_write_begin(struct file *file, struct address_space *mapping, + loff_t pos, unsigned len, unsigned flags, + struct page **pagep, void **fsdata) +{ + struct inode *inode = mapping->host; + struct ubifs_info *c = inode->i_sb->s_fs_info; + struct ubifs_inode *ui = ubifs_inode(inode); + pgoff_t index = pos >> PAGE_CACHE_SHIFT; + int uninitialized_var(err), appending = !!(pos + len > inode->i_size); + struct page *page; + + + ubifs_assert(ubifs_inode(inode)->ui_size == inode->i_size); + + if (unlikely(c->ro_media)) + return -EROFS; + + /* Try out the fast-path part first */ + page = __grab_cache_page(mapping, index); + if (unlikely(!page)) + return -ENOMEM; + + if (!PageUptodate(page)) { + /* The page is not loaded from the flash */ + if (!(pos & PAGE_CACHE_MASK) && len == PAGE_CACHE_SIZE) + /* + * We change whole page so no need to load it. But we + * have to set the @PG_checked flag to make the further + * code the page is new. This might be not true, but it + * is better to budget more that to read the page from + * the media. + */ + SetPageChecked(page); + else { + err = do_readpage(page); + if (err) { + unlock_page(page); + page_cache_release(page); + return err; + } + } + + SetPageUptodate(page); + ClearPageError(page); + } + + err = allocate_budget(c, page, ui, appending); + if (unlikely(err)) { + ubifs_assert(err == -ENOSPC); + /* + * Budgeting failed which means it would have to force + * write-back but didn't, because we set the @fast flag in the + * request. Write-back cannot be done now, while we have the + * page locked, because it would deadlock. Unlock and free + * everything and fall-back to slow-path. + */ + if (appending) { + ubifs_assert(mutex_is_locked(&ui->ui_mutex)); + mutex_unlock(&ui->ui_mutex); + } + unlock_page(page); + page_cache_release(page); + + return write_begin_slow(mapping, pos, len, pagep); + } + + /* + * Whee, we aquired budgeting quickly - without involving + * garbage-collection, committing or forceing write-back. We return + * with @ui->ui_mutex locked if we are appending pages, and unlocked + * otherwise. This is an optimization (slightly hacky though). + */ + *pagep = page; + return 0; + +} + +/** + * cancel_budget - cancel budget. + * @c: UBIFS file-system description object + * @page: page to cancel budget for + * @ui: UBIFS inode object the page belongs to + * @appending: non-zero if the page is appended + * + * This is a helper function for a page write operation. It unlocks the + * @ui->ui_mutex in case of appending. + */ +static void cancel_budget(struct ubifs_info *c, struct page *page, + struct ubifs_inode *ui, int appending) +{ + if (appending) { + if (!ui->dirty) + ubifs_release_dirty_inode_budget(c, ui); + mutex_unlock(&ui->ui_mutex); + } + if (!PagePrivate(page)) { + if (PageChecked(page)) + release_new_page_budget(c); + else + release_existing_page_budget(c); + } +} + +static int ubifs_write_end(struct file *file, struct address_space *mapping, + loff_t pos, unsigned len, unsigned copied, + struct page *page, void *fsdata) +{ + struct inode *inode = mapping->host; + struct ubifs_inode *ui = ubifs_inode(inode); + struct ubifs_info *c = inode->i_sb->s_fs_info; + loff_t end_pos = pos + len; + int appending = !!(end_pos > inode->i_size); + + dbg_gen("ino %lu, pos %llu, pg %lu, len %u, copied %d, i_size %lld", + inode->i_ino, pos, page->index, len, copied, inode->i_size); + + if (unlikely(copied < len && len == PAGE_CACHE_SIZE)) { + /* + * VFS copied less data to the page that it intended and + * declared in its '->write_begin()' call via the @len + * argument. If the page was not up-to-date, and @len was + * @PAGE_CACHE_SIZE, the 'ubifs_write_begin()' function did + * not load it from the media (for optimization reasons). This + * means that part of the page contains garbage. So read the + * page now. + */ + dbg_gen("copied %d instead of %d, read page and repeat", + copied, len); + cancel_budget(c, page, ui, appending); + + /* + * Return 0 to force VFS to repeat the whole operation, or the + * error code if 'do_readpage()' failes. + */ + copied = do_readpage(page); + goto out; + } + + if (!PagePrivate(page)) { + SetPagePrivate(page); + atomic_long_inc(&c->dirty_pg_cnt); + __set_page_dirty_nobuffers(page); + } + + if (appending) { + i_size_write(inode, end_pos); + ui->ui_size = end_pos; + /* + * Note, we do not set @I_DIRTY_PAGES (which means that the + * inode has dirty pages), this has been done in + * '__set_page_dirty_nobuffers()'. + */ + __mark_inode_dirty(inode, I_DIRTY_DATASYNC); + ubifs_assert(mutex_is_locked(&ui->ui_mutex)); + mutex_unlock(&ui->ui_mutex); + } + +out: + unlock_page(page); + page_cache_release(page); + return copied; +} + +static int ubifs_readpage(struct file *file, struct page *page) +{ + do_readpage(page); + unlock_page(page); + return 0; +} + +static int do_writepage(struct page *page, int len) +{ + int err = 0, i, blen; + unsigned int block; + void *addr; + union ubifs_key key; + struct inode *inode = page->mapping->host; + struct ubifs_info *c = inode->i_sb->s_fs_info; + +#ifdef UBIFS_DEBUG + spin_lock(&ui->ui_lock); + ubifs_assert(page->index <= ui->synced_i_size << PAGE_CACHE_SIZE); + spin_unlock(&ui->ui_lock); +#endif + + /* Update radix tree tags */ + set_page_writeback(page); + + addr = kmap(page); + block = page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT; + i = 0; + while (len) { + blen = min_t(int, len, UBIFS_BLOCK_SIZE); + data_key_init(c, &key, inode->i_ino, block); + err = ubifs_jnl_write_data(c, inode, &key, addr, blen); + if (err) + break; + if (++i >= UBIFS_BLOCKS_PER_PAGE) + break; + block += 1; + addr += blen; + len -= blen; + } + if (err) { + SetPageError(page); + ubifs_err("cannot write page %lu of inode %lu, error %d", + page->index, inode->i_ino, err); + ubifs_ro_mode(c, err); + } + + ubifs_assert(PagePrivate(page)); + if (PageChecked(page)) + release_new_page_budget(c); + else + release_existing_page_budget(c); + + atomic_long_dec(&c->dirty_pg_cnt); + ClearPagePrivate(page); + ClearPageChecked(page); + + kunmap(page); + unlock_page(page); + end_page_writeback(page); + return err; +} + +/* + * When writing-back dirty inodes, VFS first writes-back pages belonging to the + * inode, then the inode itself. For UBIFS this may cause a problem. Consider a + * situation when a we have an inode with size 0, then a megabyte of data is + * appended to the inode, then write-back starts and flushes some amount of the + * dirty pages, the journal becomes full, commit happens and finishes, and then + * an unclean reboot happens. When the file system is mounted next time, the + * inode size would still be 0, but there would be many pages which are beyond + * the inode size, they would be indexed and consume flash space. Because the + * journal has been committed, the replay would not be able to detect this + * situation and correct the inode size. This means UBIFS would have to scan + * whole index and correct all inode sizes, which is long an unacceptable. + * + * To prevent situations like this, UBIFS writes pages back only if they are + * within last synchronized inode size, i.e. the the size which has been + * written to the flash media last time. Otherwise, UBIFS forces inode + * write-back, thus making sure the on-flash inode contains current inode size, + * and then keeps writing pages back. + * + * Some locking issues explanation. 'ubifs_writepage()' first is called with + * the page locked, and it locks @ui_mutex. However, write-back does take inode + * @i_mutex, which means other VFS operations may be run on this inode at the + * same time. And the problematic one is truncation to smaller size, from where + * we have to call 'vmtruncate()', which first changes @inode->i_size, then + * drops the truncated pages. And while dropping the pages, it takes the page + * lock. This means that 'do_truncation()' cannot call 'vmtruncate()' with + * @ui_mutex locked, because it would deadlock with 'ubifs_writepage()'. This + * means that @inode->i_size is changed while @ui_mutex is unlocked. + * + * But in 'ubifs_writepage()' we have to guarantee that we do not write beyond + * inode size. How do we do this if @inode->i_size may became smaller while we + * are in the middle of 'ubifs_writepage()'? The UBIFS solution is the + * @ui->ui_isize "shadow" field which UBIFS uses instead of @inode->i_size + * internally and updates it under @ui_mutex. + * + * Q: why we do not worry that if we race with truncation, we may end up with a + * situation when the inode is truncated while we are in the middle of + * 'do_writepage()', so we do write beyond inode size? + * A: If we are in the middle of 'do_writepage()', truncation would be locked + * on the page lock and it would not write the truncated inode node to the + * journal before we have finished. + */ +static int ubifs_writepage(struct page *page, struct writeback_control *wbc) +{ + struct inode *inode = page->mapping->host; + struct ubifs_inode *ui = ubifs_inode(inode); + loff_t i_size = i_size_read(inode), synced_i_size; + pgoff_t end_index = i_size >> PAGE_CACHE_SHIFT; + int err, len = i_size & (PAGE_CACHE_SIZE - 1); + void *kaddr; + + dbg_gen("ino %lu, pg %lu, pg flags %#lx", + inode->i_ino, page->index, page->flags); + ubifs_assert(PagePrivate(page)); + + /* Is the page fully outside @i_size? (truncate in progress) */ + if (page->index > end_index || (page->index == end_index && !len)) { + err = 0; + goto out_unlock; + } + + spin_lock(&ui->ui_lock); + synced_i_size = ui->synced_i_size; + spin_unlock(&ui->ui_lock); + + /* Is the page fully inside @i_size? */ + if (page->index < end_index) { + if (page->index >= synced_i_size >> PAGE_CACHE_SHIFT) { + err = inode->i_sb->s_op->write_inode(inode, 1); + if (err) + goto out_unlock; + /* + * The inode has been written, but the write-buffer has + * not been synchronized, so in case of an unclean + * reboot we may end up with some pages beyond inode + * size, but they would be in the journal (because + * commit flushes write buffers) and recovery would deal + * with this. + */ + } + return do_writepage(page, PAGE_CACHE_SIZE); + } + + /* + * The page straddles @i_size. It must be zeroed out on each and every + * writepage invocation because it may be mmapped. "A file is mapped + * in multiples of the page size. For a file that is not a multiple of + * the page size, the remaining memory is zeroed when mapped, and + * writes to that region are not written out to the file." + */ + kaddr = kmap_atomic(page, KM_USER0); + memset(kaddr + len, 0, PAGE_CACHE_SIZE - len); + flush_dcache_page(page); + kunmap_atomic(kaddr, KM_USER0); + + if (i_size > synced_i_size) { + err = inode->i_sb->s_op->write_inode(inode, 1); + if (err) + goto out_unlock; + } + + return do_writepage(page, len); + +out_unlock: + unlock_page(page); + return err; +} + +/** + * do_attr_changes - change inode attributes. + * @inode: inode to change attributes for + * @attr: describes attributes to change + */ +static void do_attr_changes(struct inode *inode, const struct iattr *attr) +{ + if (attr->ia_valid & ATTR_UID) + inode->i_uid = attr->ia_uid; + if (attr->ia_valid & ATTR_GID) + inode->i_gid = attr->ia_gid; + if (attr->ia_valid & ATTR_ATIME) + inode->i_atime = timespec_trunc(attr->ia_atime, + inode->i_sb->s_time_gran); + if (attr->ia_valid & ATTR_MTIME) + inode->i_mtime = timespec_trunc(attr->ia_mtime, + inode->i_sb->s_time_gran); + if (attr->ia_valid & ATTR_CTIME) + inode->i_ctime = timespec_trunc(attr->ia_ctime, + inode->i_sb->s_time_gran); + if (attr->ia_valid & ATTR_MODE) { + umode_t mode = attr->ia_mode; + + if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) + mode &= ~S_ISGID; + inode->i_mode = mode; + } +} + +/** + * do_truncation - truncate an inode. + * @c: UBIFS file-system description object + * @inode: inode to truncate + * @attr: inode attribute changes description + * + * This function implements VFS '->setattr()' call when the inode is truncated + * to a smaller size. Returns zero in case of success and a negative error code + * in case of failure. + */ +static int do_truncation(struct ubifs_info *c, struct inode *inode, + const struct iattr *attr) +{ + int err; + struct ubifs_budget_req req; + loff_t old_size = inode->i_size, new_size = attr->ia_size; + int offset = new_size & (UBIFS_BLOCK_SIZE - 1); + struct ubifs_inode *ui = ubifs_inode(inode); + + dbg_gen("ino %lu, size %lld -> %lld", inode->i_ino, old_size, new_size); + memset(&req, 0, sizeof(struct ubifs_budget_req)); + + /* + * If this is truncation to a smaller size, and we do not truncate on a + * block boundary, budget for changing one data block, because the last + * block will be re-written. + */ + if (new_size & (UBIFS_BLOCK_SIZE - 1)) + req.dirtied_page = 1; + + req.dirtied_ino = 1; + /* A funny way to budget for truncation node */ + req.dirtied_ino_d = UBIFS_TRUN_NODE_SZ; + err = ubifs_budget_space(c, &req); + if (err) + return err; + + err = vmtruncate(inode, new_size); + if (err) + goto out_budg; + + if (offset) { + pgoff_t index = new_size >> PAGE_CACHE_SHIFT; + struct page *page; + + page = find_lock_page(inode->i_mapping, index); + if (page) { + if (PageDirty(page)) { + /* + * 'ubifs_jnl_truncate()' will try to truncate + * the last data node, but it contains + * out-of-date data because the page is dirty. + * Write the page now, so that + * 'ubifs_jnl_truncate()' will see an already + * truncated (and up to date) data node. + */ + ubifs_assert(PagePrivate(page)); + + clear_page_dirty_for_io(page); + if (UBIFS_BLOCKS_PER_PAGE_SHIFT) + offset = new_size & + (PAGE_CACHE_SIZE - 1); + err = do_writepage(page, offset); + page_cache_release(page); + if (err) + goto out_budg; + /* + * We could now tell 'ubifs_jnl_truncate()' not + * to read the last block. + */ + } else { + /* + * We could 'kmap()' the page and pass the data + * to 'ubifs_jnl_truncate()' to save it from + * having to read it. + */ + unlock_page(page); + page_cache_release(page); + } + } + } + + mutex_lock(&ui->ui_mutex); + ui->ui_size = inode->i_size; + /* Truncation changes inode [mc]time */ + inode->i_mtime = inode->i_ctime = ubifs_current_time(inode); + /* The other attributes may be changed at the same time as well */ + do_attr_changes(inode, attr); + + err = ubifs_jnl_truncate(c, inode, old_size, new_size); + mutex_unlock(&ui->ui_mutex); +out_budg: + ubifs_release_budget(c, &req); + return err; +} + +/** + * do_setattr - change inode attributes. + * @c: UBIFS file-system description object + * @inode: inode to change attributes for + * @attr: inode attribute changes description + * + * This function implements VFS '->setattr()' call for all cases except + * truncations to smaller size. Returns zero in case of success and a negative + * error code in case of failure. + */ +static int do_setattr(struct ubifs_info *c, struct inode *inode, + const struct iattr *attr) +{ + int err, release; + loff_t new_size = attr->ia_size; + struct ubifs_inode *ui = ubifs_inode(inode); + struct ubifs_budget_req req = { .dirtied_ino = 1, + .dirtied_ino_d = ui->data_len }; + + err = ubifs_budget_space(c, &req); + if (err) + return err; + + if (attr->ia_valid & ATTR_SIZE) { + dbg_gen("size %lld -> %lld", inode->i_size, new_size); + err = vmtruncate(inode, new_size); + if (err) + goto out; + } + + mutex_lock(&ui->ui_mutex); + if (attr->ia_valid & ATTR_SIZE) { + /* Truncation changes inode [mc]time */ + inode->i_mtime = inode->i_ctime = ubifs_current_time(inode); + /* 'vmtruncate()' changed @i_size, update @ui_size */ + ui->ui_size = inode->i_size; + } + + do_attr_changes(inode, attr); + + release = ui->dirty; + if (attr->ia_valid & ATTR_SIZE) + /* + * Inode length changed, so we have to make sure + * @I_DIRTY_DATASYNC is set. + */ + __mark_inode_dirty(inode, I_DIRTY_SYNC | I_DIRTY_DATASYNC); + else + mark_inode_dirty_sync(inode); + mutex_unlock(&ui->ui_mutex); + + if (release) + ubifs_release_budget(c, &req); + if (IS_SYNC(inode)) + err = inode->i_sb->s_op->write_inode(inode, 1); + return err; + +out: + ubifs_release_budget(c, &req); + return err; +} + +int ubifs_setattr(struct dentry *dentry, struct iattr *attr) +{ + int err; + struct inode *inode = dentry->d_inode; + struct ubifs_info *c = inode->i_sb->s_fs_info; + + dbg_gen("ino %lu, ia_valid %#x", inode->i_ino, attr->ia_valid); + err = inode_change_ok(inode, attr); + if (err) + return err; + + err = dbg_check_synced_i_size(inode); + if (err) + return err; + + if ((attr->ia_valid & ATTR_SIZE) && attr->ia_size < inode->i_size) + /* Truncation to a smaller size */ + err = do_truncation(c, inode, attr); + else + err = do_setattr(c, inode, attr); + + return err; +} + +static void ubifs_invalidatepage(struct page *page, unsigned long offset) +{ + struct inode *inode = page->mapping->host; + struct ubifs_info *c = inode->i_sb->s_fs_info; + + ubifs_assert(PagePrivate(page)); + if (offset) + /* Partial page remains dirty */ + return; + + if (PageChecked(page)) + release_new_page_budget(c); + else + release_existing_page_budget(c); + + atomic_long_dec(&c->dirty_pg_cnt); + ClearPagePrivate(page); + ClearPageChecked(page); +} + +static void *ubifs_follow_link(struct dentry *dentry, struct nameidata *nd) +{ + struct ubifs_inode *ui = ubifs_inode(dentry->d_inode); + + nd_set_link(nd, ui->data); + return NULL; +} + +int ubifs_fsync(struct file *file, struct dentry *dentry, int datasync) +{ + struct inode *inode = dentry->d_inode; + struct ubifs_info *c = inode->i_sb->s_fs_info; + int err; + + dbg_gen("syncing inode %lu", inode->i_ino); + + /* + * VFS has already synchronized dirty pages for this inode. Synchronize + * the inode unless this is a 'datasync()' call. + */ + if (!datasync || (inode->i_state & I_DIRTY_DATASYNC)) { + err = inode->i_sb->s_op->write_inode(inode, 1); + if (err) + return err; + } + + /* + * Nodes related to this inode may still sit in a write-buffer. Flush + * them. + */ + err = ubifs_sync_wbufs_by_inode(c, inode); + if (err) + return err; + + return 0; +} + +/** + * mctime_update_needed - check if mtime or ctime update is needed. + * @inode: the inode to do the check for + * @now: current time + * + * This helper function checks if the inode mtime/ctime should be updated or + * not. If current values of the time-stamps are within the UBIFS inode time + * granularity, they are not updated. This is an optimization. + */ +static inline int mctime_update_needed(const struct inode *inode, + const struct timespec *now) +{ + if (!timespec_equal(&inode->i_mtime, now) || + !timespec_equal(&inode->i_ctime, now)) + return 1; + return 0; +} + +/** + * update_ctime - update mtime and ctime of an inode. + * @c: UBIFS file-system description object + * @inode: inode to update + * + * This function updates mtime and ctime of the inode if it is not equivalent to + * current time. Returns zero in case of success and a negative error code in + * case of failure. + */ +static int update_mctime(struct ubifs_info *c, struct inode *inode) +{ + struct timespec now = ubifs_current_time(inode); + struct ubifs_inode *ui = ubifs_inode(inode); + + if (mctime_update_needed(inode, &now)) { + int err, release; + struct ubifs_budget_req req = { .dirtied_ino = 1, + .dirtied_ino_d = ui->data_len }; + + err = ubifs_budget_space(c, &req); + if (err) + return err; + + mutex_lock(&ui->ui_mutex); + inode->i_mtime = inode->i_ctime = ubifs_current_time(inode); + release = ui->dirty; + mark_inode_dirty_sync(inode); + mutex_unlock(&ui->ui_mutex); + if (release) + ubifs_release_budget(c, &req); + } + + return 0; +} + +static ssize_t ubifs_aio_write(struct kiocb *iocb, const struct iovec *iov, + unsigned long nr_segs, loff_t pos) +{ + int err; + ssize_t ret; + struct inode *inode = iocb->ki_filp->f_mapping->host; + struct ubifs_info *c = inode->i_sb->s_fs_info; + + err = update_mctime(c, inode); + if (err) + return err; + + ret = generic_file_aio_write(iocb, iov, nr_segs, pos); + if (ret < 0) + return ret; + + if (ret > 0 && (IS_SYNC(inode) || iocb->ki_filp->f_flags & O_SYNC)) { + err = ubifs_sync_wbufs_by_inode(c, inode); + if (err) + return err; + } + + return ret; +} + +static int ubifs_set_page_dirty(struct page *page) +{ + int ret; + + ret = __set_page_dirty_nobuffers(page); + /* + * An attempt to dirty a page without budgeting for it - should not + * happen. + */ + ubifs_assert(ret == 0); + return ret; +} + +static int ubifs_releasepage(struct page *page, gfp_t unused_gfp_flags) +{ + /* + * An attempt to release a dirty page without budgeting for it - should + * not happen. + */ + if (PageWriteback(page)) + return 0; + ubifs_assert(PagePrivate(page)); + ubifs_assert(0); + ClearPagePrivate(page); + ClearPageChecked(page); + return 1; +} + +/* + * mmap()d file has taken write protection fault and is being made + * writable. UBIFS must ensure page is budgeted for. + */ +static int ubifs_vm_page_mkwrite(struct vm_area_struct *vma, struct page *page) +{ + struct inode *inode = vma->vm_file->f_path.dentry->d_inode; + struct ubifs_info *c = inode->i_sb->s_fs_info; + struct timespec now = ubifs_current_time(inode); + struct ubifs_budget_req req = { .new_page = 1 }; + int err, update_time; + + dbg_gen("ino %lu, pg %lu, i_size %lld", inode->i_ino, page->index, + i_size_read(inode)); + ubifs_assert(!(inode->i_sb->s_flags & MS_RDONLY)); + + if (unlikely(c->ro_media)) + return -EROFS; + + /* + * We have not locked @page so far so we may budget for changing the + * page. Note, we cannot do this after we locked the page, because + * budgeting may cause write-back which would cause deadlock. + * + * At the moment we do not know whether the page is dirty or not, so we + * assume that it is not and budget for a new page. We could look at + * the @PG_private flag and figure this out, but we may race with write + * back and the page state may change by the time we lock it, so this + * would need additional care. We do not bother with this at the + * moment, although it might be good idea to do. Instead, we allocate + * budget for a new page and amend it later on if the page was in fact + * dirty. + * + * The budgeting-related logic of this function is similar to what we + * do in 'ubifs_write_begin()' and 'ubifs_write_end()'. Glance there + * for more comments. + */ + update_time = mctime_update_needed(inode, &now); + if (update_time) + /* + * We have to change inode time stamp which requires extra + * budgeting. + */ + req.dirtied_ino = 1; + + err = ubifs_budget_space(c, &req); + if (unlikely(err)) { + if (err == -ENOSPC) + ubifs_warn("out of space for mmapped file " + "(inode number %lu)", inode->i_ino); + return err; + } + + lock_page(page); + if (unlikely(page->mapping != inode->i_mapping || + page_offset(page) > i_size_read(inode))) { + /* Page got truncated out from underneath us */ + err = -EINVAL; + goto out_unlock; + } + + if (PagePrivate(page)) + release_new_page_budget(c); + else { + if (!PageChecked(page)) + ubifs_convert_page_budget(c); + SetPagePrivate(page); + atomic_long_inc(&c->dirty_pg_cnt); + __set_page_dirty_nobuffers(page); + } + + if (update_time) { + int release; + struct ubifs_inode *ui = ubifs_inode(inode); + + mutex_lock(&ui->ui_mutex); + inode->i_mtime = inode->i_ctime = ubifs_current_time(inode); + release = ui->dirty; + mark_inode_dirty_sync(inode); + mutex_unlock(&ui->ui_mutex); + if (release) + ubifs_release_dirty_inode_budget(c, ui); + } + + unlock_page(page); + return 0; + +out_unlock: + unlock_page(page); + ubifs_release_budget(c, &req); + return err; +} + +static struct vm_operations_struct ubifs_file_vm_ops = { + .fault = filemap_fault, + .page_mkwrite = ubifs_vm_page_mkwrite, +}; + +static int ubifs_file_mmap(struct file *file, struct vm_area_struct *vma) +{ + int err; + + /* 'generic_file_mmap()' takes care of NOMMU case */ + err = generic_file_mmap(file, vma); + if (err) + return err; + vma->vm_ops = &ubifs_file_vm_ops; + return 0; +} + +struct address_space_operations ubifs_file_address_operations = { + .readpage = ubifs_readpage, + .writepage = ubifs_writepage, + .write_begin = ubifs_write_begin, + .write_end = ubifs_write_end, + .invalidatepage = ubifs_invalidatepage, + .set_page_dirty = ubifs_set_page_dirty, + .releasepage = ubifs_releasepage, +}; + +struct inode_operations ubifs_file_inode_operations = { + .setattr = ubifs_setattr, + .getattr = ubifs_getattr, +#ifdef CONFIG_UBIFS_FS_XATTR + .setxattr = ubifs_setxattr, + .getxattr = ubifs_getxattr, + .listxattr = ubifs_listxattr, + .removexattr = ubifs_removexattr, +#endif +}; + +struct inode_operations ubifs_symlink_inode_operations = { + .readlink = generic_readlink, + .follow_link = ubifs_follow_link, + .setattr = ubifs_setattr, + .getattr = ubifs_getattr, +}; + +struct file_operations ubifs_file_operations = { + .llseek = generic_file_llseek, + .read = do_sync_read, + .write = do_sync_write, + .aio_read = generic_file_aio_read, + .aio_write = ubifs_aio_write, + .mmap = ubifs_file_mmap, + .fsync = ubifs_fsync, + .unlocked_ioctl = ubifs_ioctl, + .splice_read = generic_file_splice_read, +#ifdef CONFIG_COMPAT + .compat_ioctl = ubifs_compat_ioctl, +#endif +}; diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c new file mode 100644 index 000000000000..10394c548367 --- /dev/null +++ b/fs/ubifs/find.c @@ -0,0 +1,975 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* + * This file contains functions for finding LEBs for various purposes e.g. + * garbage collection. In general, lprops category heaps and lists are used + * for fast access, falling back on scanning the LPT as a last resort. + */ + +#include +#include "ubifs.h" + +/** + * struct scan_data - data provided to scan callback functions + * @min_space: minimum number of bytes for which to scan + * @pick_free: whether it is OK to scan for empty LEBs + * @lnum: LEB number found is returned here + * @exclude_index: whether to exclude index LEBs + */ +struct scan_data { + int min_space; + int pick_free; + int lnum; + int exclude_index; +}; + +/** + * valuable - determine whether LEB properties are valuable. + * @c: the UBIFS file-system description object + * @lprops: LEB properties + * + * This function return %1 if the LEB properties should be added to the LEB + * properties tree in memory. Otherwise %0 is returned. + */ +static int valuable(struct ubifs_info *c, const struct ubifs_lprops *lprops) +{ + int n, cat = lprops->flags & LPROPS_CAT_MASK; + struct ubifs_lpt_heap *heap; + + switch (cat) { + case LPROPS_DIRTY: + case LPROPS_DIRTY_IDX: + case LPROPS_FREE: + heap = &c->lpt_heap[cat - 1]; + if (heap->cnt < heap->max_cnt) + return 1; + if (lprops->free + lprops->dirty >= c->dark_wm) + return 1; + return 0; + case LPROPS_EMPTY: + n = c->lst.empty_lebs + c->freeable_cnt - + c->lst.taken_empty_lebs; + if (n < c->lsave_cnt) + return 1; + return 0; + case LPROPS_FREEABLE: + return 1; + case LPROPS_FRDI_IDX: + return 1; + } + return 0; +} + +/** + * scan_for_dirty_cb - dirty space scan callback. + * @c: the UBIFS file-system description object + * @lprops: LEB properties to scan + * @in_tree: whether the LEB properties are in main memory + * @data: information passed to and from the caller of the scan + * + * This function returns a code that indicates whether the scan should continue + * (%LPT_SCAN_CONTINUE), whether the LEB properties should be added to the tree + * in main memory (%LPT_SCAN_ADD), or whether the scan should stop + * (%LPT_SCAN_STOP). + */ +static int scan_for_dirty_cb(struct ubifs_info *c, + const struct ubifs_lprops *lprops, int in_tree, + struct scan_data *data) +{ + int ret = LPT_SCAN_CONTINUE; + + /* Exclude LEBs that are currently in use */ + if (lprops->flags & LPROPS_TAKEN) + return LPT_SCAN_CONTINUE; + /* Determine whether to add these LEB properties to the tree */ + if (!in_tree && valuable(c, lprops)) + ret |= LPT_SCAN_ADD; + /* Exclude LEBs with too little space */ + if (lprops->free + lprops->dirty < data->min_space) + return ret; + /* If specified, exclude index LEBs */ + if (data->exclude_index && lprops->flags & LPROPS_INDEX) + return ret; + /* If specified, exclude empty or freeable LEBs */ + if (lprops->free + lprops->dirty == c->leb_size) { + if (!data->pick_free) + return ret; + /* Exclude LEBs with too little dirty space (unless it is empty) */ + } else if (lprops->dirty < c->dead_wm) + return ret; + /* Finally we found space */ + data->lnum = lprops->lnum; + return LPT_SCAN_ADD | LPT_SCAN_STOP; +} + +/** + * scan_for_dirty - find a data LEB with free space. + * @c: the UBIFS file-system description object + * @min_space: minimum amount free plus dirty space the returned LEB has to + * have + * @pick_free: if it is OK to return a free or freeable LEB + * @exclude_index: whether to exclude index LEBs + * + * This function returns a pointer to the LEB properties found or a negative + * error code. + */ +static const struct ubifs_lprops *scan_for_dirty(struct ubifs_info *c, + int min_space, int pick_free, + int exclude_index) +{ + const struct ubifs_lprops *lprops; + struct ubifs_lpt_heap *heap; + struct scan_data data; + int err, i; + + /* There may be an LEB with enough dirty space on the free heap */ + heap = &c->lpt_heap[LPROPS_FREE - 1]; + for (i = 0; i < heap->cnt; i++) { + lprops = heap->arr[i]; + if (lprops->free + lprops->dirty < min_space) + continue; + if (lprops->dirty < c->dead_wm) + continue; + return lprops; + } + /* + * A LEB may have fallen off of the bottom of the dirty heap, and ended + * up as uncategorized even though it has enough dirty space for us now, + * so check the uncategorized list. N.B. neither empty nor freeable LEBs + * can end up as uncategorized because they are kept on lists not + * finite-sized heaps. + */ + list_for_each_entry(lprops, &c->uncat_list, list) { + if (lprops->flags & LPROPS_TAKEN) + continue; + if (lprops->free + lprops->dirty < min_space) + continue; + if (exclude_index && (lprops->flags & LPROPS_INDEX)) + continue; + if (lprops->dirty < c->dead_wm) + continue; + return lprops; + } + /* We have looked everywhere in main memory, now scan the flash */ + if (c->pnodes_have >= c->pnode_cnt) + /* All pnodes are in memory, so skip scan */ + return ERR_PTR(-ENOSPC); + data.min_space = min_space; + data.pick_free = pick_free; + data.lnum = -1; + data.exclude_index = exclude_index; + err = ubifs_lpt_scan_nolock(c, -1, c->lscan_lnum, + (ubifs_lpt_scan_callback)scan_for_dirty_cb, + &data); + if (err) + return ERR_PTR(err); + ubifs_assert(data.lnum >= c->main_first && data.lnum < c->leb_cnt); + c->lscan_lnum = data.lnum; + lprops = ubifs_lpt_lookup_dirty(c, data.lnum); + if (IS_ERR(lprops)) + return lprops; + ubifs_assert(lprops->lnum == data.lnum); + ubifs_assert(lprops->free + lprops->dirty >= min_space); + ubifs_assert(lprops->dirty >= c->dead_wm || + (pick_free && + lprops->free + lprops->dirty == c->leb_size)); + ubifs_assert(!(lprops->flags & LPROPS_TAKEN)); + ubifs_assert(!exclude_index || !(lprops->flags & LPROPS_INDEX)); + return lprops; +} + +/** + * ubifs_find_dirty_leb - find a dirty LEB for the Garbage Collector. + * @c: the UBIFS file-system description object + * @ret_lp: LEB properties are returned here on exit + * @min_space: minimum amount free plus dirty space the returned LEB has to + * have + * @pick_free: controls whether it is OK to pick empty or index LEBs + * + * This function tries to find a dirty logical eraseblock which has at least + * @min_space free and dirty space. It prefers to take an LEB from the dirty or + * dirty index heap, and it falls-back to LPT scanning if the heaps are empty + * or do not have an LEB which satisfies the @min_space criteria. + * + * Note: + * o LEBs which have less than dead watermark of dirty space are never picked + * by this function; + * + * Returns zero and the LEB properties of + * found dirty LEB in case of success, %-ENOSPC if no dirty LEB was found and a + * negative error code in case of other failures. The returned LEB is marked as + * "taken". + * + * The additional @pick_free argument controls if this function has to return a + * free or freeable LEB if one is present. For example, GC must to set it to %1, + * when called from the journal space reservation function, because the + * appearance of free space may coincide with the loss of enough dirty space + * for GC to succeed anyway. + * + * In contrast, if the Garbage Collector is called from budgeting, it should + * just make free space, not return LEBs which are already free or freeable. + * + * In addition @pick_free is set to %2 by the recovery process in order to + * recover gc_lnum in which case an index LEB must not be returned. + */ +int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp, + int min_space, int pick_free) +{ + int err = 0, sum, exclude_index = pick_free == 2 ? 1 : 0; + const struct ubifs_lprops *lp = NULL, *idx_lp = NULL; + struct ubifs_lpt_heap *heap, *idx_heap; + + ubifs_get_lprops(c); + + if (pick_free) { + int lebs, rsvd_idx_lebs = 0; + + spin_lock(&c->space_lock); + lebs = c->lst.empty_lebs; + lebs += c->freeable_cnt - c->lst.taken_empty_lebs; + + /* + * Note, the index may consume more LEBs than have been reserved + * for it. It is OK because it might be consolidated by GC. + * But if the index takes fewer LEBs than it is reserved for it, + * this function must avoid picking those reserved LEBs. + */ + if (c->min_idx_lebs >= c->lst.idx_lebs) { + rsvd_idx_lebs = c->min_idx_lebs - c->lst.idx_lebs; + exclude_index = 1; + } + spin_unlock(&c->space_lock); + + /* Check if there are enough free LEBs for the index */ + if (rsvd_idx_lebs < lebs) { + /* OK, try to find an empty LEB */ + lp = ubifs_fast_find_empty(c); + if (lp) + goto found; + + /* Or a freeable LEB */ + lp = ubifs_fast_find_freeable(c); + if (lp) + goto found; + } else + /* + * We cannot pick free/freeable LEBs in the below code. + */ + pick_free = 0; + } else { + spin_lock(&c->space_lock); + exclude_index = (c->min_idx_lebs >= c->lst.idx_lebs); + spin_unlock(&c->space_lock); + } + + /* Look on the dirty and dirty index heaps */ + heap = &c->lpt_heap[LPROPS_DIRTY - 1]; + idx_heap = &c->lpt_heap[LPROPS_DIRTY_IDX - 1]; + + if (idx_heap->cnt && !exclude_index) { + idx_lp = idx_heap->arr[0]; + sum = idx_lp->free + idx_lp->dirty; + /* + * Since we reserve twice as more space for the index than it + * actually takes, it does not make sense to pick indexing LEBs + * with less than half LEB of dirty space. + */ + if (sum < min_space || sum < c->half_leb_size) + idx_lp = NULL; + } + + if (heap->cnt) { + lp = heap->arr[0]; + if (lp->dirty + lp->free < min_space) + lp = NULL; + } + + /* Pick the LEB with most space */ + if (idx_lp && lp) { + if (idx_lp->free + idx_lp->dirty >= lp->free + lp->dirty) + lp = idx_lp; + } else if (idx_lp && !lp) + lp = idx_lp; + + if (lp) { + ubifs_assert(lp->dirty >= c->dead_wm); + goto found; + } + + /* Did not find a dirty LEB on the dirty heaps, have to scan */ + dbg_find("scanning LPT for a dirty LEB"); + lp = scan_for_dirty(c, min_space, pick_free, exclude_index); + if (IS_ERR(lp)) { + err = PTR_ERR(lp); + goto out; + } + ubifs_assert(lp->dirty >= c->dead_wm || + (pick_free && lp->free + lp->dirty == c->leb_size)); + +found: + dbg_find("found LEB %d, free %d, dirty %d, flags %#x", + lp->lnum, lp->free, lp->dirty, lp->flags); + + lp = ubifs_change_lp(c, lp, LPROPS_NC, LPROPS_NC, + lp->flags | LPROPS_TAKEN, 0); + if (IS_ERR(lp)) { + err = PTR_ERR(lp); + goto out; + } + + memcpy(ret_lp, lp, sizeof(struct ubifs_lprops)); + +out: + ubifs_release_lprops(c); + return err; +} + +/** + * scan_for_free_cb - free space scan callback. + * @c: the UBIFS file-system description object + * @lprops: LEB properties to scan + * @in_tree: whether the LEB properties are in main memory + * @data: information passed to and from the caller of the scan + * + * This function returns a code that indicates whether the scan should continue + * (%LPT_SCAN_CONTINUE), whether the LEB properties should be added to the tree + * in main memory (%LPT_SCAN_ADD), or whether the scan should stop + * (%LPT_SCAN_STOP). + */ +static int scan_for_free_cb(struct ubifs_info *c, + const struct ubifs_lprops *lprops, int in_tree, + struct scan_data *data) +{ + int ret = LPT_SCAN_CONTINUE; + + /* Exclude LEBs that are currently in use */ + if (lprops->flags & LPROPS_TAKEN) + return LPT_SCAN_CONTINUE; + /* Determine whether to add these LEB properties to the tree */ + if (!in_tree && valuable(c, lprops)) + ret |= LPT_SCAN_ADD; + /* Exclude index LEBs */ + if (lprops->flags & LPROPS_INDEX) + return ret; + /* Exclude LEBs with too little space */ + if (lprops->free < data->min_space) + return ret; + /* If specified, exclude empty LEBs */ + if (!data->pick_free && lprops->free == c->leb_size) + return ret; + /* + * LEBs that have only free and dirty space must not be allocated + * because they may have been unmapped already or they may have data + * that is obsolete only because of nodes that are still sitting in a + * wbuf. + */ + if (lprops->free + lprops->dirty == c->leb_size && lprops->dirty > 0) + return ret; + /* Finally we found space */ + data->lnum = lprops->lnum; + return LPT_SCAN_ADD | LPT_SCAN_STOP; +} + +/** + * do_find_free_space - find a data LEB with free space. + * @c: the UBIFS file-system description object + * @min_space: minimum amount of free space required + * @pick_free: whether it is OK to scan for empty LEBs + * @squeeze: whether to try to find space in a non-empty LEB first + * + * This function returns a pointer to the LEB properties found or a negative + * error code. + */ +static +const struct ubifs_lprops *do_find_free_space(struct ubifs_info *c, + int min_space, int pick_free, + int squeeze) +{ + const struct ubifs_lprops *lprops; + struct ubifs_lpt_heap *heap; + struct scan_data data; + int err, i; + + if (squeeze) { + lprops = ubifs_fast_find_free(c); + if (lprops && lprops->free >= min_space) + return lprops; + } + if (pick_free) { + lprops = ubifs_fast_find_empty(c); + if (lprops) + return lprops; + } + if (!squeeze) { + lprops = ubifs_fast_find_free(c); + if (lprops && lprops->free >= min_space) + return lprops; + } + /* There may be an LEB with enough free space on the dirty heap */ + heap = &c->lpt_heap[LPROPS_DIRTY - 1]; + for (i = 0; i < heap->cnt; i++) { + lprops = heap->arr[i]; + if (lprops->free >= min_space) + return lprops; + } + /* + * A LEB may have fallen off of the bottom of the free heap, and ended + * up as uncategorized even though it has enough free space for us now, + * so check the uncategorized list. N.B. neither empty nor freeable LEBs + * can end up as uncategorized because they are kept on lists not + * finite-sized heaps. + */ + list_for_each_entry(lprops, &c->uncat_list, list) { + if (lprops->flags & LPROPS_TAKEN) + continue; + if (lprops->flags & LPROPS_INDEX) + continue; + if (lprops->free >= min_space) + return lprops; + } + /* We have looked everywhere in main memory, now scan the flash */ + if (c->pnodes_have >= c->pnode_cnt) + /* All pnodes are in memory, so skip scan */ + return ERR_PTR(-ENOSPC); + data.min_space = min_space; + data.pick_free = pick_free; + data.lnum = -1; + err = ubifs_lpt_scan_nolock(c, -1, c->lscan_lnum, + (ubifs_lpt_scan_callback)scan_for_free_cb, + &data); + if (err) + return ERR_PTR(err); + ubifs_assert(data.lnum >= c->main_first && data.lnum < c->leb_cnt); + c->lscan_lnum = data.lnum; + lprops = ubifs_lpt_lookup_dirty(c, data.lnum); + if (IS_ERR(lprops)) + return lprops; + ubifs_assert(lprops->lnum == data.lnum); + ubifs_assert(lprops->free >= min_space); + ubifs_assert(!(lprops->flags & LPROPS_TAKEN)); + ubifs_assert(!(lprops->flags & LPROPS_INDEX)); + return lprops; +} + +/** + * ubifs_find_free_space - find a data LEB with free space. + * @c: the UBIFS file-system description object + * @min_space: minimum amount of required free space + * @free: contains amount of free space in the LEB on exit + * @squeeze: whether to try to find space in a non-empty LEB first + * + * This function looks for an LEB with at least @min_space bytes of free space. + * It tries to find an empty LEB if possible. If no empty LEBs are available, + * this function searches for a non-empty data LEB. The returned LEB is marked + * as "taken". + * + * This function returns found LEB number in case of success, %-ENOSPC if it + * failed to find a LEB with @min_space bytes of free space and other a negative + * error codes in case of failure. + */ +int ubifs_find_free_space(struct ubifs_info *c, int min_space, int *free, + int squeeze) +{ + const struct ubifs_lprops *lprops; + int lebs, rsvd_idx_lebs, pick_free = 0, err, lnum, flags; + + dbg_find("min_space %d", min_space); + ubifs_get_lprops(c); + + /* Check if there are enough empty LEBs for commit */ + spin_lock(&c->space_lock); + if (c->min_idx_lebs > c->lst.idx_lebs) + rsvd_idx_lebs = c->min_idx_lebs - c->lst.idx_lebs; + else + rsvd_idx_lebs = 0; + lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt - + c->lst.taken_empty_lebs; + ubifs_assert(lebs + c->lst.idx_lebs >= c->min_idx_lebs); + if (rsvd_idx_lebs < lebs) + /* + * OK to allocate an empty LEB, but we still don't want to go + * looking for one if there aren't any. + */ + if (c->lst.empty_lebs - c->lst.taken_empty_lebs > 0) { + pick_free = 1; + /* + * Because we release the space lock, we must account + * for this allocation here. After the LEB properties + * flags have been updated, we subtract one. Note, the + * result of this is that lprops also decreases + * @taken_empty_lebs in 'ubifs_change_lp()', so it is + * off by one for a short period of time which may + * introduce a small disturbance to budgeting + * calculations, but this is harmless because at the + * worst case this would make the budgeting subsystem + * be more pessimistic than needed. + * + * Fundamentally, this is about serialization of the + * budgeting and lprops subsystems. We could make the + * @space_lock a mutex and avoid dropping it before + * calling 'ubifs_change_lp()', but mutex is more + * heavy-weight, and we want budgeting to be as fast as + * possible. + */ + c->lst.taken_empty_lebs += 1; + } + spin_unlock(&c->space_lock); + + lprops = do_find_free_space(c, min_space, pick_free, squeeze); + if (IS_ERR(lprops)) { + err = PTR_ERR(lprops); + goto out; + } + + lnum = lprops->lnum; + flags = lprops->flags | LPROPS_TAKEN; + + lprops = ubifs_change_lp(c, lprops, LPROPS_NC, LPROPS_NC, flags, 0); + if (IS_ERR(lprops)) { + err = PTR_ERR(lprops); + goto out; + } + + if (pick_free) { + spin_lock(&c->space_lock); + c->lst.taken_empty_lebs -= 1; + spin_unlock(&c->space_lock); + } + + *free = lprops->free; + ubifs_release_lprops(c); + + if (*free == c->leb_size) { + /* + * Ensure that empty LEBs have been unmapped. They may not have + * been, for example, because of an unclean unmount. Also + * LEBs that were freeable LEBs (free + dirty == leb_size) will + * not have been unmapped. + */ + err = ubifs_leb_unmap(c, lnum); + if (err) + return err; + } + + dbg_find("found LEB %d, free %d", lnum, *free); + ubifs_assert(*free >= min_space); + return lnum; + +out: + if (pick_free) { + spin_lock(&c->space_lock); + c->lst.taken_empty_lebs -= 1; + spin_unlock(&c->space_lock); + } + ubifs_release_lprops(c); + return err; +} + +/** + * scan_for_idx_cb - callback used by the scan for a free LEB for the index. + * @c: the UBIFS file-system description object + * @lprops: LEB properties to scan + * @in_tree: whether the LEB properties are in main memory + * @data: information passed to and from the caller of the scan + * + * This function returns a code that indicates whether the scan should continue + * (%LPT_SCAN_CONTINUE), whether the LEB properties should be added to the tree + * in main memory (%LPT_SCAN_ADD), or whether the scan should stop + * (%LPT_SCAN_STOP). + */ +static int scan_for_idx_cb(struct ubifs_info *c, + const struct ubifs_lprops *lprops, int in_tree, + struct scan_data *data) +{ + int ret = LPT_SCAN_CONTINUE; + + /* Exclude LEBs that are currently in use */ + if (lprops->flags & LPROPS_TAKEN) + return LPT_SCAN_CONTINUE; + /* Determine whether to add these LEB properties to the tree */ + if (!in_tree && valuable(c, lprops)) + ret |= LPT_SCAN_ADD; + /* Exclude index LEBS */ + if (lprops->flags & LPROPS_INDEX) + return ret; + /* Exclude LEBs that cannot be made empty */ + if (lprops->free + lprops->dirty != c->leb_size) + return ret; + /* + * We are allocating for the index so it is safe to allocate LEBs with + * only free and dirty space, because write buffers are sync'd at commit + * start. + */ + data->lnum = lprops->lnum; + return LPT_SCAN_ADD | LPT_SCAN_STOP; +} + +/** + * scan_for_leb_for_idx - scan for a free LEB for the index. + * @c: the UBIFS file-system description object + */ +static const struct ubifs_lprops *scan_for_leb_for_idx(struct ubifs_info *c) +{ + struct ubifs_lprops *lprops; + struct scan_data data; + int err; + + data.lnum = -1; + err = ubifs_lpt_scan_nolock(c, -1, c->lscan_lnum, + (ubifs_lpt_scan_callback)scan_for_idx_cb, + &data); + if (err) + return ERR_PTR(err); + ubifs_assert(data.lnum >= c->main_first && data.lnum < c->leb_cnt); + c->lscan_lnum = data.lnum; + lprops = ubifs_lpt_lookup_dirty(c, data.lnum); + if (IS_ERR(lprops)) + return lprops; + ubifs_assert(lprops->lnum == data.lnum); + ubifs_assert(lprops->free + lprops->dirty == c->leb_size); + ubifs_assert(!(lprops->flags & LPROPS_TAKEN)); + ubifs_assert(!(lprops->flags & LPROPS_INDEX)); + return lprops; +} + +/** + * ubifs_find_free_leb_for_idx - find a free LEB for the index. + * @c: the UBIFS file-system description object + * + * This function looks for a free LEB and returns that LEB number. The returned + * LEB is marked as "taken", "index". + * + * Only empty LEBs are allocated. This is for two reasons. First, the commit + * calculates the number of LEBs to allocate based on the assumption that they + * will be empty. Secondly, free space at the end of an index LEB is not + * guaranteed to be empty because it may have been used by the in-the-gaps + * method prior to an unclean unmount. + * + * If no LEB is found %-ENOSPC is returned. For other failures another negative + * error code is returned. + */ +int ubifs_find_free_leb_for_idx(struct ubifs_info *c) +{ + const struct ubifs_lprops *lprops; + int lnum = -1, err, flags; + + ubifs_get_lprops(c); + + lprops = ubifs_fast_find_empty(c); + if (!lprops) { + lprops = ubifs_fast_find_freeable(c); + if (!lprops) { + ubifs_assert(c->freeable_cnt == 0); + if (c->lst.empty_lebs - c->lst.taken_empty_lebs > 0) { + lprops = scan_for_leb_for_idx(c); + if (IS_ERR(lprops)) { + err = PTR_ERR(lprops); + goto out; + } + } + } + } + + if (!lprops) { + err = -ENOSPC; + goto out; + } + + lnum = lprops->lnum; + + dbg_find("found LEB %d, free %d, dirty %d, flags %#x", + lnum, lprops->free, lprops->dirty, lprops->flags); + + flags = lprops->flags | LPROPS_TAKEN | LPROPS_INDEX; + lprops = ubifs_change_lp(c, lprops, c->leb_size, 0, flags, 0); + if (IS_ERR(lprops)) { + err = PTR_ERR(lprops); + goto out; + } + + ubifs_release_lprops(c); + + /* + * Ensure that empty LEBs have been unmapped. They may not have been, + * for example, because of an unclean unmount. Also LEBs that were + * freeable LEBs (free + dirty == leb_size) will not have been unmapped. + */ + err = ubifs_leb_unmap(c, lnum); + if (err) { + ubifs_change_one_lp(c, lnum, LPROPS_NC, LPROPS_NC, 0, + LPROPS_TAKEN | LPROPS_INDEX, 0); + return err; + } + + return lnum; + +out: + ubifs_release_lprops(c); + return err; +} + +static int cmp_dirty_idx(const struct ubifs_lprops **a, + const struct ubifs_lprops **b) +{ + const struct ubifs_lprops *lpa = *a; + const struct ubifs_lprops *lpb = *b; + + return lpa->dirty + lpa->free - lpb->dirty - lpb->free; +} + +static void swap_dirty_idx(struct ubifs_lprops **a, struct ubifs_lprops **b, + int size) +{ + struct ubifs_lprops *t = *a; + + *a = *b; + *b = t; +} + +/** + * ubifs_save_dirty_idx_lnums - save an array of the most dirty index LEB nos. + * @c: the UBIFS file-system description object + * + * This function is called each commit to create an array of LEB numbers of + * dirty index LEBs sorted in order of dirty and free space. This is used by + * the in-the-gaps method of TNC commit. + */ +int ubifs_save_dirty_idx_lnums(struct ubifs_info *c) +{ + int i; + + ubifs_get_lprops(c); + /* Copy the LPROPS_DIRTY_IDX heap */ + c->dirty_idx.cnt = c->lpt_heap[LPROPS_DIRTY_IDX - 1].cnt; + memcpy(c->dirty_idx.arr, c->lpt_heap[LPROPS_DIRTY_IDX - 1].arr, + sizeof(void *) * c->dirty_idx.cnt); + /* Sort it so that the dirtiest is now at the end */ + sort(c->dirty_idx.arr, c->dirty_idx.cnt, sizeof(void *), + (int (*)(const void *, const void *))cmp_dirty_idx, + (void (*)(void *, void *, int))swap_dirty_idx); + dbg_find("found %d dirty index LEBs", c->dirty_idx.cnt); + if (c->dirty_idx.cnt) + dbg_find("dirtiest index LEB is %d with dirty %d and free %d", + c->dirty_idx.arr[c->dirty_idx.cnt - 1]->lnum, + c->dirty_idx.arr[c->dirty_idx.cnt - 1]->dirty, + c->dirty_idx.arr[c->dirty_idx.cnt - 1]->free); + /* Replace the lprops pointers with LEB numbers */ + for (i = 0; i < c->dirty_idx.cnt; i++) + c->dirty_idx.arr[i] = (void *)(size_t)c->dirty_idx.arr[i]->lnum; + ubifs_release_lprops(c); + return 0; +} + +/** + * scan_dirty_idx_cb - callback used by the scan for a dirty index LEB. + * @c: the UBIFS file-system description object + * @lprops: LEB properties to scan + * @in_tree: whether the LEB properties are in main memory + * @data: information passed to and from the caller of the scan + * + * This function returns a code that indicates whether the scan should continue + * (%LPT_SCAN_CONTINUE), whether the LEB properties should be added to the tree + * in main memory (%LPT_SCAN_ADD), or whether the scan should stop + * (%LPT_SCAN_STOP). + */ +static int scan_dirty_idx_cb(struct ubifs_info *c, + const struct ubifs_lprops *lprops, int in_tree, + struct scan_data *data) +{ + int ret = LPT_SCAN_CONTINUE; + + /* Exclude LEBs that are currently in use */ + if (lprops->flags & LPROPS_TAKEN) + return LPT_SCAN_CONTINUE; + /* Determine whether to add these LEB properties to the tree */ + if (!in_tree && valuable(c, lprops)) + ret |= LPT_SCAN_ADD; + /* Exclude non-index LEBs */ + if (!(lprops->flags & LPROPS_INDEX)) + return ret; + /* Exclude LEBs with too little space */ + if (lprops->free + lprops->dirty < c->min_idx_node_sz) + return ret; + /* Finally we found space */ + data->lnum = lprops->lnum; + return LPT_SCAN_ADD | LPT_SCAN_STOP; +} + +/** + * find_dirty_idx_leb - find a dirty index LEB. + * @c: the UBIFS file-system description object + * + * This function returns LEB number upon success and a negative error code upon + * failure. In particular, -ENOSPC is returned if a dirty index LEB is not + * found. + * + * Note that this function scans the entire LPT but it is called very rarely. + */ +static int find_dirty_idx_leb(struct ubifs_info *c) +{ + const struct ubifs_lprops *lprops; + struct ubifs_lpt_heap *heap; + struct scan_data data; + int err, i, ret; + + /* Check all structures in memory first */ + data.lnum = -1; + heap = &c->lpt_heap[LPROPS_DIRTY_IDX - 1]; + for (i = 0; i < heap->cnt; i++) { + lprops = heap->arr[i]; + ret = scan_dirty_idx_cb(c, lprops, 1, &data); + if (ret & LPT_SCAN_STOP) + goto found; + } + list_for_each_entry(lprops, &c->frdi_idx_list, list) { + ret = scan_dirty_idx_cb(c, lprops, 1, &data); + if (ret & LPT_SCAN_STOP) + goto found; + } + list_for_each_entry(lprops, &c->uncat_list, list) { + ret = scan_dirty_idx_cb(c, lprops, 1, &data); + if (ret & LPT_SCAN_STOP) + goto found; + } + if (c->pnodes_have >= c->pnode_cnt) + /* All pnodes are in memory, so skip scan */ + return -ENOSPC; + err = ubifs_lpt_scan_nolock(c, -1, c->lscan_lnum, + (ubifs_lpt_scan_callback)scan_dirty_idx_cb, + &data); + if (err) + return err; +found: + ubifs_assert(data.lnum >= c->main_first && data.lnum < c->leb_cnt); + c->lscan_lnum = data.lnum; + lprops = ubifs_lpt_lookup_dirty(c, data.lnum); + if (IS_ERR(lprops)) + return PTR_ERR(lprops); + ubifs_assert(lprops->lnum == data.lnum); + ubifs_assert(lprops->free + lprops->dirty >= c->min_idx_node_sz); + ubifs_assert(!(lprops->flags & LPROPS_TAKEN)); + ubifs_assert((lprops->flags & LPROPS_INDEX)); + + dbg_find("found dirty LEB %d, free %d, dirty %d, flags %#x", + lprops->lnum, lprops->free, lprops->dirty, lprops->flags); + + lprops = ubifs_change_lp(c, lprops, LPROPS_NC, LPROPS_NC, + lprops->flags | LPROPS_TAKEN, 0); + if (IS_ERR(lprops)) + return PTR_ERR(lprops); + + return lprops->lnum; +} + +/** + * get_idx_gc_leb - try to get a LEB number from trivial GC. + * @c: the UBIFS file-system description object + */ +static int get_idx_gc_leb(struct ubifs_info *c) +{ + const struct ubifs_lprops *lp; + int err, lnum; + + err = ubifs_get_idx_gc_leb(c); + if (err < 0) + return err; + lnum = err; + /* + * The LEB was due to be unmapped after the commit but + * it is needed now for this commit. + */ + lp = ubifs_lpt_lookup_dirty(c, lnum); + if (unlikely(IS_ERR(lp))) + return PTR_ERR(lp); + lp = ubifs_change_lp(c, lp, LPROPS_NC, LPROPS_NC, + lp->flags | LPROPS_INDEX, -1); + if (unlikely(IS_ERR(lp))) + return PTR_ERR(lp); + dbg_find("LEB %d, dirty %d and free %d flags %#x", + lp->lnum, lp->dirty, lp->free, lp->flags); + return lnum; +} + +/** + * find_dirtiest_idx_leb - find dirtiest index LEB from dirtiest array. + * @c: the UBIFS file-system description object + */ +static int find_dirtiest_idx_leb(struct ubifs_info *c) +{ + const struct ubifs_lprops *lp; + int lnum; + + while (1) { + if (!c->dirty_idx.cnt) + return -ENOSPC; + /* The lprops pointers were replaced by LEB numbers */ + lnum = (size_t)c->dirty_idx.arr[--c->dirty_idx.cnt]; + lp = ubifs_lpt_lookup(c, lnum); + if (IS_ERR(lp)) + return PTR_ERR(lp); + if ((lp->flags & LPROPS_TAKEN) || !(lp->flags & LPROPS_INDEX)) + continue; + lp = ubifs_change_lp(c, lp, LPROPS_NC, LPROPS_NC, + lp->flags | LPROPS_TAKEN, 0); + if (IS_ERR(lp)) + return PTR_ERR(lp); + break; + } + dbg_find("LEB %d, dirty %d and free %d flags %#x", lp->lnum, lp->dirty, + lp->free, lp->flags); + ubifs_assert(lp->flags | LPROPS_TAKEN); + ubifs_assert(lp->flags | LPROPS_INDEX); + return lnum; +} + +/** + * ubifs_find_dirty_idx_leb - try to find dirtiest index LEB as at last commit. + * @c: the UBIFS file-system description object + * + * This function attempts to find an untaken index LEB with the most free and + * dirty space that can be used without overwriting index nodes that were in the + * last index committed. + */ +int ubifs_find_dirty_idx_leb(struct ubifs_info *c) +{ + int err; + + ubifs_get_lprops(c); + + /* + * We made an array of the dirtiest index LEB numbers as at the start of + * last commit. Try that array first. + */ + err = find_dirtiest_idx_leb(c); + + /* Next try scanning the entire LPT */ + if (err == -ENOSPC) + err = find_dirty_idx_leb(c); + + /* Finally take any index LEBs awaiting trivial GC */ + if (err == -ENOSPC) + err = get_idx_gc_leb(c); + + ubifs_release_lprops(c); + return err; +} diff --git a/fs/ubifs/gc.c b/fs/ubifs/gc.c new file mode 100644 index 000000000000..d0f3dac29081 --- /dev/null +++ b/fs/ubifs/gc.c @@ -0,0 +1,773 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Adrian Hunter + * Artem Bityutskiy (Битюцкий Артём) + */ + +/* + * This file implements garbage collection. The procedure for garbage collection + * is different depending on whether a LEB as an index LEB (contains index + * nodes) or not. For non-index LEBs, garbage collection finds a LEB which + * contains a lot of dirty space (obsolete nodes), and copies the non-obsolete + * nodes to the journal, at which point the garbage-collected LEB is free to be + * reused. For index LEBs, garbage collection marks the non-obsolete index nodes + * dirty in the TNC, and after the next commit, the garbage-collected LEB is + * to be reused. Garbage collection will cause the number of dirty index nodes + * to grow, however sufficient space is reserved for the index to ensure the + * commit will never run out of space. + */ + +#include +#include "ubifs.h" + +/* + * GC tries to optimize the way it fit nodes to available space, and it sorts + * nodes a little. The below constants are watermarks which define "large", + * "medium", and "small" nodes. + */ +#define MEDIUM_NODE_WM (UBIFS_BLOCK_SIZE / 4) +#define SMALL_NODE_WM UBIFS_MAX_DENT_NODE_SZ + +/* + * GC may need to move more then one LEB to make progress. The below constants + * define "soft" and "hard" limits on the number of LEBs the garbage collector + * may move. + */ +#define SOFT_LEBS_LIMIT 4 +#define HARD_LEBS_LIMIT 32 + +/** + * switch_gc_head - switch the garbage collection journal head. + * @c: UBIFS file-system description object + * @buf: buffer to write + * @len: length of the buffer to write + * @lnum: LEB number written is returned here + * @offs: offset written is returned here + * + * This function switch the GC head to the next LEB which is reserved in + * @c->gc_lnum. Returns %0 in case of success, %-EAGAIN if commit is required, + * and other negative error code in case of failures. + */ +static int switch_gc_head(struct ubifs_info *c) +{ + int err, gc_lnum = c->gc_lnum; + struct ubifs_wbuf *wbuf = &c->jheads[GCHD].wbuf; + + ubifs_assert(gc_lnum != -1); + dbg_gc("switch GC head from LEB %d:%d to LEB %d (waste %d bytes)", + wbuf->lnum, wbuf->offs + wbuf->used, gc_lnum, + c->leb_size - wbuf->offs - wbuf->used); + + err = ubifs_wbuf_sync_nolock(wbuf); + if (err) + return err; + + /* + * The GC write-buffer was synchronized, we may safely unmap + * 'c->gc_lnum'. + */ + err = ubifs_leb_unmap(c, gc_lnum); + if (err) + return err; + + err = ubifs_add_bud_to_log(c, GCHD, gc_lnum, 0); + if (err) + return err; + + c->gc_lnum = -1; + err = ubifs_wbuf_seek_nolock(wbuf, gc_lnum, 0, UBI_LONGTERM); + return err; +} + +/** + * move_nodes - move nodes. + * @c: UBIFS file-system description object + * @sleb: describes nodes to move + * + * This function moves valid nodes from data LEB described by @sleb to the GC + * journal head. The obsolete nodes are dropped. + * + * When moving nodes we have to deal with classical bin-packing problem: the + * space in the current GC journal head LEB and in @c->gc_lnum are the "bins", + * where the nodes in the @sleb->nodes list are the elements which should be + * fit optimally to the bins. This function uses the "first fit decreasing" + * strategy, although it does not really sort the nodes but just split them on + * 3 classes - large, medium, and small, so they are roughly sorted. + * + * This function returns zero in case of success, %-EAGAIN if commit is + * required, and other negative error codes in case of other failures. + */ +static int move_nodes(struct ubifs_info *c, struct ubifs_scan_leb *sleb) +{ + struct ubifs_scan_node *snod, *tmp; + struct list_head large, medium, small; + struct ubifs_wbuf *wbuf = &c->jheads[GCHD].wbuf; + int avail, err, min = INT_MAX; + + INIT_LIST_HEAD(&large); + INIT_LIST_HEAD(&medium); + INIT_LIST_HEAD(&small); + + list_for_each_entry_safe(snod, tmp, &sleb->nodes, list) { + struct list_head *lst; + + ubifs_assert(snod->type != UBIFS_IDX_NODE); + ubifs_assert(snod->type != UBIFS_REF_NODE); + ubifs_assert(snod->type != UBIFS_CS_NODE); + + err = ubifs_tnc_has_node(c, &snod->key, 0, sleb->lnum, + snod->offs, 0); + if (err < 0) + goto out; + + lst = &snod->list; + list_del(lst); + if (!err) { + /* The node is obsolete, remove it from the list */ + kfree(snod); + continue; + } + + /* + * Sort the list of nodes so that large nodes go first, and + * small nodes go last. + */ + if (snod->len > MEDIUM_NODE_WM) + list_add(lst, &large); + else if (snod->len > SMALL_NODE_WM) + list_add(lst, &medium); + else + list_add(lst, &small); + + /* And find the smallest node */ + if (snod->len < min) + min = snod->len; + } + + /* + * Join the tree lists so that we'd have one roughly sorted list + * ('large' will be the head of the joined list). + */ + list_splice(&medium, large.prev); + list_splice(&small, large.prev); + + if (wbuf->lnum == -1) { + /* + * The GC journal head is not set, because it is the first GC + * invocation since mount. + */ + err = switch_gc_head(c); + if (err) + goto out; + } + + /* Write nodes to their new location. Use the first-fit strategy */ + while (1) { + avail = c->leb_size - wbuf->offs - wbuf->used; + list_for_each_entry_safe(snod, tmp, &large, list) { + int new_lnum, new_offs; + + if (avail < min) + break; + + if (snod->len > avail) + /* This node does not fit */ + continue; + + cond_resched(); + + new_lnum = wbuf->lnum; + new_offs = wbuf->offs + wbuf->used; + err = ubifs_wbuf_write_nolock(wbuf, snod->node, + snod->len); + if (err) + goto out; + err = ubifs_tnc_replace(c, &snod->key, sleb->lnum, + snod->offs, new_lnum, new_offs, + snod->len); + if (err) + goto out; + + avail = c->leb_size - wbuf->offs - wbuf->used; + list_del(&snod->list); + kfree(snod); + } + + if (list_empty(&large)) + break; + + /* + * Waste the rest of the space in the LEB and switch to the + * next LEB. + */ + err = switch_gc_head(c); + if (err) + goto out; + } + + return 0; + +out: + list_for_each_entry_safe(snod, tmp, &large, list) { + list_del(&snod->list); + kfree(snod); + } + return err; +} + +/** + * gc_sync_wbufs - sync write-buffers for GC. + * @c: UBIFS file-system description object + * + * We must guarantee that obsoleting nodes are on flash. Unfortunately they may + * be in a write-buffer instead. That is, a node could be written to a + * write-buffer, obsoleting another node in a LEB that is GC'd. If that LEB is + * erased before the write-buffer is sync'd and then there is an unclean + * unmount, then an existing node is lost. To avoid this, we sync all + * write-buffers. + * + * This function returns %0 on success or a negative error code on failure. + */ +static int gc_sync_wbufs(struct ubifs_info *c) +{ + int err, i; + + for (i = 0; i < c->jhead_cnt; i++) { + if (i == GCHD) + continue; + err = ubifs_wbuf_sync(&c->jheads[i].wbuf); + if (err) + return err; + } + return 0; +} + +/** + * ubifs_garbage_collect_leb - garbage-collect a logical eraseblock. + * @c: UBIFS file-system description object + * @lp: describes the LEB to garbage collect + * + * This function garbage-collects an LEB and returns one of the @LEB_FREED, + * @LEB_RETAINED, etc positive codes in case of success, %-EAGAIN if commit is + * required, and other negative error codes in case of failures. + */ +int ubifs_garbage_collect_leb(struct ubifs_info *c, struct ubifs_lprops *lp) +{ + struct ubifs_scan_leb *sleb; + struct ubifs_scan_node *snod; + struct ubifs_wbuf *wbuf = &c->jheads[GCHD].wbuf; + int err = 0, lnum = lp->lnum; + + ubifs_assert(c->gc_lnum != -1 || wbuf->offs + wbuf->used == 0 || + c->need_recovery); + ubifs_assert(c->gc_lnum != lnum); + ubifs_assert(wbuf->lnum != lnum); + + /* + * We scan the entire LEB even though we only really need to scan up to + * (c->leb_size - lp->free). + */ + sleb = ubifs_scan(c, lnum, 0, c->sbuf); + if (IS_ERR(sleb)) + return PTR_ERR(sleb); + + ubifs_assert(!list_empty(&sleb->nodes)); + snod = list_entry(sleb->nodes.next, struct ubifs_scan_node, list); + + if (snod->type == UBIFS_IDX_NODE) { + struct ubifs_gced_idx_leb *idx_gc; + + dbg_gc("indexing LEB %d (free %d, dirty %d)", + lnum, lp->free, lp->dirty); + list_for_each_entry(snod, &sleb->nodes, list) { + struct ubifs_idx_node *idx = snod->node; + int level = le16_to_cpu(idx->level); + + ubifs_assert(snod->type == UBIFS_IDX_NODE); + key_read(c, ubifs_idx_key(c, idx), &snod->key); + err = ubifs_dirty_idx_node(c, &snod->key, level, lnum, + snod->offs); + if (err) + goto out; + } + + idx_gc = kmalloc(sizeof(struct ubifs_gced_idx_leb), GFP_NOFS); + if (!idx_gc) { + err = -ENOMEM; + goto out; + } + + idx_gc->lnum = lnum; + idx_gc->unmap = 0; + list_add(&idx_gc->list, &c->idx_gc); + + /* + * Don't release the LEB until after the next commit, because + * it may contain date which is needed for recovery. So + * although we freed this LEB, it will become usable only after + * the commit. + */ + err = ubifs_change_one_lp(c, lnum, c->leb_size, 0, 0, + LPROPS_INDEX, 1); + if (err) + goto out; + err = LEB_FREED_IDX; + } else { + dbg_gc("data LEB %d (free %d, dirty %d)", + lnum, lp->free, lp->dirty); + + err = move_nodes(c, sleb); + if (err) + goto out; + + err = gc_sync_wbufs(c); + if (err) + goto out; + + err = ubifs_change_one_lp(c, lnum, c->leb_size, 0, 0, 0, 0); + if (err) + goto out; + + if (c->gc_lnum == -1) { + c->gc_lnum = lnum; + err = LEB_RETAINED; + } else { + err = ubifs_wbuf_sync_nolock(wbuf); + if (err) + goto out; + + err = ubifs_leb_unmap(c, lnum); + if (err) + goto out; + + err = LEB_FREED; + } + } + +out: + ubifs_scan_destroy(sleb); + return err; +} + +/** + * ubifs_garbage_collect - UBIFS garbage collector. + * @c: UBIFS file-system description object + * @anyway: do GC even if there are free LEBs + * + * This function does out-of-place garbage collection. The return codes are: + * o positive LEB number if the LEB has been freed and may be used; + * o %-EAGAIN if the caller has to run commit; + * o %-ENOSPC if GC failed to make any progress; + * o other negative error codes in case of other errors. + * + * Garbage collector writes data to the journal when GC'ing data LEBs, and just + * marking indexing nodes dirty when GC'ing indexing LEBs. Thus, at some point + * commit may be required. But commit cannot be run from inside GC, because the + * caller might be holding the commit lock, so %-EAGAIN is returned instead; + * And this error code means that the caller has to run commit, and re-run GC + * if there is still no free space. + * + * There are many reasons why this function may return %-EAGAIN: + * o the log is full and there is no space to write an LEB reference for + * @c->gc_lnum; + * o the journal is too large and exceeds size limitations; + * o GC moved indexing LEBs, but they can be used only after the commit; + * o the shrinker fails to find clean znodes to free and requests the commit; + * o etc. + * + * Note, if the file-system is close to be full, this function may return + * %-EAGAIN infinitely, so the caller has to limit amount of re-invocations of + * the function. E.g., this happens if the limits on the journal size are too + * tough and GC writes too much to the journal before an LEB is freed. This + * might also mean that the journal is too large, and the TNC becomes to big, + * so that the shrinker is constantly called, finds not clean znodes to free, + * and requests commit. Well, this may also happen if the journal is all right, + * but another kernel process consumes too much memory. Anyway, infinite + * %-EAGAIN may happen, but in some extreme/misconfiguration cases. + */ +int ubifs_garbage_collect(struct ubifs_info *c, int anyway) +{ + int i, err, ret, min_space = c->dead_wm; + struct ubifs_lprops lp; + struct ubifs_wbuf *wbuf = &c->jheads[GCHD].wbuf; + + ubifs_assert_cmt_locked(c); + + if (ubifs_gc_should_commit(c)) + return -EAGAIN; + + mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); + + if (c->ro_media) { + ret = -EROFS; + goto out_unlock; + } + + /* We expect the write-buffer to be empty on entry */ + ubifs_assert(!wbuf->used); + + for (i = 0; ; i++) { + int space_before = c->leb_size - wbuf->offs - wbuf->used; + int space_after; + + cond_resched(); + + /* Give the commit an opportunity to run */ + if (ubifs_gc_should_commit(c)) { + ret = -EAGAIN; + break; + } + + if (i > SOFT_LEBS_LIMIT && !list_empty(&c->idx_gc)) { + /* + * We've done enough iterations. Indexing LEBs were + * moved and will be available after the commit. + */ + dbg_gc("soft limit, some index LEBs GC'ed, -EAGAIN"); + ubifs_commit_required(c); + ret = -EAGAIN; + break; + } + + if (i > HARD_LEBS_LIMIT) { + /* + * We've moved too many LEBs and have not made + * progress, give up. + */ + dbg_gc("hard limit, -ENOSPC"); + ret = -ENOSPC; + break; + } + + /* + * Empty and freeable LEBs can turn up while we waited for + * the wbuf lock, or while we have been running GC. In that + * case, we should just return one of those instead of + * continuing to GC dirty LEBs. Hence we request + * 'ubifs_find_dirty_leb()' to return an empty LEB if it can. + */ + ret = ubifs_find_dirty_leb(c, &lp, min_space, anyway ? 0 : 1); + if (ret) { + if (ret == -ENOSPC) + dbg_gc("no more dirty LEBs"); + break; + } + + dbg_gc("found LEB %d: free %d, dirty %d, sum %d " + "(min. space %d)", lp.lnum, lp.free, lp.dirty, + lp.free + lp.dirty, min_space); + + if (lp.free + lp.dirty == c->leb_size) { + /* An empty LEB was returned */ + dbg_gc("LEB %d is free, return it", lp.lnum); + /* + * ubifs_find_dirty_leb() doesn't return freeable index + * LEBs. + */ + ubifs_assert(!(lp.flags & LPROPS_INDEX)); + if (lp.free != c->leb_size) { + /* + * Write buffers must be sync'd before + * unmapping freeable LEBs, because one of them + * may contain data which obsoletes something + * in 'lp.pnum'. + */ + ret = gc_sync_wbufs(c); + if (ret) + goto out; + ret = ubifs_change_one_lp(c, lp.lnum, + c->leb_size, 0, 0, 0, + 0); + if (ret) + goto out; + } + ret = ubifs_leb_unmap(c, lp.lnum); + if (ret) + goto out; + ret = lp.lnum; + break; + } + + space_before = c->leb_size - wbuf->offs - wbuf->used; + if (wbuf->lnum == -1) + space_before = 0; + + ret = ubifs_garbage_collect_leb(c, &lp); + if (ret < 0) { + if (ret == -EAGAIN || ret == -ENOSPC) { + /* + * These codes are not errors, so we have to + * return the LEB to lprops. But if the + * 'ubifs_return_leb()' function fails, its + * failure code is propagated to the caller + * instead of the original '-EAGAIN' or + * '-ENOSPC'. + */ + err = ubifs_return_leb(c, lp.lnum); + if (err) + ret = err; + break; + } + goto out; + } + + if (ret == LEB_FREED) { + /* An LEB has been freed and is ready for use */ + dbg_gc("LEB %d freed, return", lp.lnum); + ret = lp.lnum; + break; + } + + if (ret == LEB_FREED_IDX) { + /* + * This was an indexing LEB and it cannot be + * immediately used. And instead of requesting the + * commit straight away, we try to garbage collect some + * more. + */ + dbg_gc("indexing LEB %d freed, continue", lp.lnum); + continue; + } + + ubifs_assert(ret == LEB_RETAINED); + space_after = c->leb_size - wbuf->offs - wbuf->used; + dbg_gc("LEB %d retained, freed %d bytes", lp.lnum, + space_after - space_before); + + if (space_after > space_before) { + /* GC makes progress, keep working */ + min_space >>= 1; + if (min_space < c->dead_wm) + min_space = c->dead_wm; + continue; + } + + dbg_gc("did not make progress"); + + /* + * GC moved an LEB bud have not done any progress. This means + * that the previous GC head LEB contained too few free space + * and the LEB which was GC'ed contained only large nodes which + * did not fit that space. + * + * We can do 2 things: + * 1. pick another LEB in a hope it'll contain a small node + * which will fit the space we have at the end of current GC + * head LEB, but there is no guarantee, so we try this out + * unless we have already been working for too long; + * 2. request an LEB with more dirty space, which will force + * 'ubifs_find_dirty_leb()' to start scanning the lprops + * table, instead of just picking one from the heap + * (previously it already picked the dirtiest LEB). + */ + if (i < SOFT_LEBS_LIMIT) { + dbg_gc("try again"); + continue; + } + + min_space <<= 1; + if (min_space > c->dark_wm) + min_space = c->dark_wm; + dbg_gc("set min. space to %d", min_space); + } + + if (ret == -ENOSPC && !list_empty(&c->idx_gc)) { + dbg_gc("no space, some index LEBs GC'ed, -EAGAIN"); + ubifs_commit_required(c); + ret = -EAGAIN; + } + + err = ubifs_wbuf_sync_nolock(wbuf); + if (!err) + err = ubifs_leb_unmap(c, c->gc_lnum); + if (err) { + ret = err; + goto out; + } +out_unlock: + mutex_unlock(&wbuf->io_mutex); + return ret; + +out: + ubifs_assert(ret < 0); + ubifs_assert(ret != -ENOSPC && ret != -EAGAIN); + ubifs_ro_mode(c, ret); + ubifs_wbuf_sync_nolock(wbuf); + mutex_unlock(&wbuf->io_mutex); + ubifs_return_leb(c, lp.lnum); + return ret; +} + +/** + * ubifs_gc_start_commit - garbage collection at start of commit. + * @c: UBIFS file-system description object + * + * If a LEB has only dirty and free space, then we may safely unmap it and make + * it free. Note, we cannot do this with indexing LEBs because dirty space may + * correspond index nodes that are required for recovery. In that case, the + * LEB cannot be unmapped until after the next commit. + * + * This function returns %0 upon success and a negative error code upon failure. + */ +int ubifs_gc_start_commit(struct ubifs_info *c) +{ + struct ubifs_gced_idx_leb *idx_gc; + const struct ubifs_lprops *lp; + int err = 0, flags; + + ubifs_get_lprops(c); + + /* + * Unmap (non-index) freeable LEBs. Note that recovery requires that all + * wbufs are sync'd before this, which is done in 'do_commit()'. + */ + while (1) { + lp = ubifs_fast_find_freeable(c); + if (unlikely(IS_ERR(lp))) { + err = PTR_ERR(lp); + goto out; + } + if (!lp) + break; + ubifs_assert(!(lp->flags & LPROPS_TAKEN)); + ubifs_assert(!(lp->flags & LPROPS_INDEX)); + err = ubifs_leb_unmap(c, lp->lnum); + if (err) + goto out; + lp = ubifs_change_lp(c, lp, c->leb_size, 0, lp->flags, 0); + if (unlikely(IS_ERR(lp))) { + err = PTR_ERR(lp); + goto out; + } + ubifs_assert(!(lp->flags & LPROPS_TAKEN)); + ubifs_assert(!(lp->flags & LPROPS_INDEX)); + } + + /* Mark GC'd index LEBs OK to unmap after this commit finishes */ + list_for_each_entry(idx_gc, &c->idx_gc, list) + idx_gc->unmap = 1; + + /* Record index freeable LEBs for unmapping after commit */ + while (1) { + lp = ubifs_fast_find_frdi_idx(c); + if (unlikely(IS_ERR(lp))) { + err = PTR_ERR(lp); + goto out; + } + if (!lp) + break; + idx_gc = kmalloc(sizeof(struct ubifs_gced_idx_leb), GFP_NOFS); + if (!idx_gc) { + err = -ENOMEM; + goto out; + } + ubifs_assert(!(lp->flags & LPROPS_TAKEN)); + ubifs_assert(lp->flags & LPROPS_INDEX); + /* Don't release the LEB until after the next commit */ + flags = (lp->flags | LPROPS_TAKEN) ^ LPROPS_INDEX; + lp = ubifs_change_lp(c, lp, c->leb_size, 0, flags, 1); + if (unlikely(IS_ERR(lp))) { + err = PTR_ERR(lp); + kfree(idx_gc); + goto out; + } + ubifs_assert(lp->flags & LPROPS_TAKEN); + ubifs_assert(!(lp->flags & LPROPS_INDEX)); + idx_gc->lnum = lp->lnum; + idx_gc->unmap = 1; + list_add(&idx_gc->list, &c->idx_gc); + } +out: + ubifs_release_lprops(c); + return err; +} + +/** + * ubifs_gc_end_commit - garbage collection at end of commit. + * @c: UBIFS file-system description object + * + * This function completes out-of-place garbage collection of index LEBs. + */ +int ubifs_gc_end_commit(struct ubifs_info *c) +{ + struct ubifs_gced_idx_leb *idx_gc, *tmp; + struct ubifs_wbuf *wbuf; + int err = 0; + + wbuf = &c->jheads[GCHD].wbuf; + mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); + list_for_each_entry_safe(idx_gc, tmp, &c->idx_gc, list) + if (idx_gc->unmap) { + dbg_gc("LEB %d", idx_gc->lnum); + err = ubifs_leb_unmap(c, idx_gc->lnum); + if (err) + goto out; + err = ubifs_change_one_lp(c, idx_gc->lnum, LPROPS_NC, + LPROPS_NC, 0, LPROPS_TAKEN, -1); + if (err) + goto out; + list_del(&idx_gc->list); + kfree(idx_gc); + } +out: + mutex_unlock(&wbuf->io_mutex); + return err; +} + +/** + * ubifs_destroy_idx_gc - destroy idx_gc list. + * @c: UBIFS file-system description object + * + * This function destroys the idx_gc list. It is called when unmounting or + * remounting read-only so locks are not needed. + */ +void ubifs_destroy_idx_gc(struct ubifs_info *c) +{ + while (!list_empty(&c->idx_gc)) { + struct ubifs_gced_idx_leb *idx_gc; + + idx_gc = list_entry(c->idx_gc.next, struct ubifs_gced_idx_leb, + list); + c->idx_gc_cnt -= 1; + list_del(&idx_gc->list); + kfree(idx_gc); + } + +} + +/** + * ubifs_get_idx_gc_leb - get a LEB from GC'd index LEB list. + * @c: UBIFS file-system description object + * + * Called during start commit so locks are not needed. + */ +int ubifs_get_idx_gc_leb(struct ubifs_info *c) +{ + struct ubifs_gced_idx_leb *idx_gc; + int lnum; + + if (list_empty(&c->idx_gc)) + return -ENOSPC; + idx_gc = list_entry(c->idx_gc.next, struct ubifs_gced_idx_leb, list); + lnum = idx_gc->lnum; + /* c->idx_gc_cnt is updated by the caller when lprops are updated */ + list_del(&idx_gc->list); + kfree(idx_gc); + return lnum; +} diff --git a/fs/ubifs/io.c b/fs/ubifs/io.c new file mode 100644 index 000000000000..3374f91b6709 --- /dev/null +++ b/fs/ubifs/io.c @@ -0,0 +1,914 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * Copyright (C) 2006, 2007 University of Szeged, Hungary + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + * Zoltan Sogor + */ + +/* + * This file implements UBIFS I/O subsystem which provides various I/O-related + * helper functions (reading/writing/checking/validating nodes) and implements + * write-buffering support. Write buffers help to save space which otherwise + * would have been wasted for padding to the nearest minimal I/O unit boundary. + * Instead, data first goes to the write-buffer and is flushed when the + * buffer is full or when it is not used for some time (by timer). This is + * similarto the mechanism is used by JFFS2. + * + * Write-buffers are defined by 'struct ubifs_wbuf' objects and protected by + * mutexes defined inside these objects. Since sometimes upper-level code + * has to lock the write-buffer (e.g. journal space reservation code), many + * functions related to write-buffers have "nolock" suffix which means that the + * caller has to lock the write-buffer before calling this function. + * + * UBIFS stores nodes at 64 bit-aligned addresses. If the node length is not + * aligned, UBIFS starts the next node from the aligned address, and the padded + * bytes may contain any rubbish. In other words, UBIFS does not put padding + * bytes in those small gaps. Common headers of nodes store real node lengths, + * not aligned lengths. Indexing nodes also store real lengths in branches. + * + * UBIFS uses padding when it pads to the next min. I/O unit. In this case it + * uses padding nodes or padding bytes, if the padding node does not fit. + * + * All UBIFS nodes are protected by CRC checksums and UBIFS checks all nodes + * every time they are read from the flash media. + */ + +#include +#include "ubifs.h" + +/** + * ubifs_check_node - check node. + * @c: UBIFS file-system description object + * @buf: node to check + * @lnum: logical eraseblock number + * @offs: offset within the logical eraseblock + * @quiet: print no messages + * + * This function checks node magic number and CRC checksum. This function also + * validates node length to prevent UBIFS from becoming crazy when an attacker + * feeds it a file-system image with incorrect nodes. For example, too large + * node length in the common header could cause UBIFS to read memory outside of + * allocated buffer when checking the CRC checksum. + * + * This function returns zero in case of success %-EUCLEAN in case of bad CRC + * or magic. + */ +int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum, + int offs, int quiet) +{ + int err = -EINVAL, type, node_len; + uint32_t crc, node_crc, magic; + const struct ubifs_ch *ch = buf; + + ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0); + ubifs_assert(!(offs & 7) && offs < c->leb_size); + + magic = le32_to_cpu(ch->magic); + if (magic != UBIFS_NODE_MAGIC) { + if (!quiet) + ubifs_err("bad magic %#08x, expected %#08x", + magic, UBIFS_NODE_MAGIC); + err = -EUCLEAN; + goto out; + } + + type = ch->node_type; + if (type < 0 || type >= UBIFS_NODE_TYPES_CNT) { + if (!quiet) + ubifs_err("bad node type %d", type); + goto out; + } + + node_len = le32_to_cpu(ch->len); + if (node_len + offs > c->leb_size) + goto out_len; + + if (c->ranges[type].max_len == 0) { + if (node_len != c->ranges[type].len) + goto out_len; + } else if (node_len < c->ranges[type].min_len || + node_len > c->ranges[type].max_len) + goto out_len; + + crc = crc32(UBIFS_CRC32_INIT, buf + 8, node_len - 8); + node_crc = le32_to_cpu(ch->crc); + if (crc != node_crc) { + if (!quiet) + ubifs_err("bad CRC: calculated %#08x, read %#08x", + crc, node_crc); + err = -EUCLEAN; + goto out; + } + + return 0; + +out_len: + if (!quiet) + ubifs_err("bad node length %d", node_len); +out: + if (!quiet) { + ubifs_err("bad node at LEB %d:%d", lnum, offs); + dbg_dump_node(c, buf); + dbg_dump_stack(); + } + return err; +} + +/** + * ubifs_pad - pad flash space. + * @c: UBIFS file-system description object + * @buf: buffer to put padding to + * @pad: how many bytes to pad + * + * The flash media obliges us to write only in chunks of %c->min_io_size and + * when we have to write less data we add padding node to the write-buffer and + * pad it to the next minimal I/O unit's boundary. Padding nodes help when the + * media is being scanned. If the amount of wasted space is not enough to fit a + * padding node which takes %UBIFS_PAD_NODE_SZ bytes, we write padding bytes + * pattern (%UBIFS_PADDING_BYTE). + * + * Padding nodes are also used to fill gaps when the "commit-in-gaps" method is + * used. + */ +void ubifs_pad(const struct ubifs_info *c, void *buf, int pad) +{ + uint32_t crc; + + ubifs_assert(pad >= 0 && !(pad & 7)); + + if (pad >= UBIFS_PAD_NODE_SZ) { + struct ubifs_ch *ch = buf; + struct ubifs_pad_node *pad_node = buf; + + ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC); + ch->node_type = UBIFS_PAD_NODE; + ch->group_type = UBIFS_NO_NODE_GROUP; + ch->padding[0] = ch->padding[1] = 0; + ch->sqnum = 0; + ch->len = cpu_to_le32(UBIFS_PAD_NODE_SZ); + pad -= UBIFS_PAD_NODE_SZ; + pad_node->pad_len = cpu_to_le32(pad); + crc = crc32(UBIFS_CRC32_INIT, buf + 8, UBIFS_PAD_NODE_SZ - 8); + ch->crc = cpu_to_le32(crc); + memset(buf + UBIFS_PAD_NODE_SZ, 0, pad); + } else if (pad > 0) + /* Too little space, padding node won't fit */ + memset(buf, UBIFS_PADDING_BYTE, pad); +} + +/** + * next_sqnum - get next sequence number. + * @c: UBIFS file-system description object + */ +static unsigned long long next_sqnum(struct ubifs_info *c) +{ + unsigned long long sqnum; + + spin_lock(&c->cnt_lock); + sqnum = ++c->max_sqnum; + spin_unlock(&c->cnt_lock); + + if (unlikely(sqnum >= SQNUM_WARN_WATERMARK)) { + if (sqnum >= SQNUM_WATERMARK) { + ubifs_err("sequence number overflow %llu, end of life", + sqnum); + ubifs_ro_mode(c, -EINVAL); + } + ubifs_warn("running out of sequence numbers, end of life soon"); + } + + return sqnum; +} + +/** + * ubifs_prepare_node - prepare node to be written to flash. + * @c: UBIFS file-system description object + * @node: the node to pad + * @len: node length + * @pad: if the buffer has to be padded + * + * This function prepares node at @node to be written to the media - it + * calculates node CRC, fills the common header, and adds proper padding up to + * the next minimum I/O unit if @pad is not zero. + */ +void ubifs_prepare_node(struct ubifs_info *c, void *node, int len, int pad) +{ + uint32_t crc; + struct ubifs_ch *ch = node; + unsigned long long sqnum = next_sqnum(c); + + ubifs_assert(len >= UBIFS_CH_SZ); + + ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC); + ch->len = cpu_to_le32(len); + ch->group_type = UBIFS_NO_NODE_GROUP; + ch->sqnum = cpu_to_le64(sqnum); + ch->padding[0] = ch->padding[1] = 0; + crc = crc32(UBIFS_CRC32_INIT, node + 8, len - 8); + ch->crc = cpu_to_le32(crc); + + if (pad) { + len = ALIGN(len, 8); + pad = ALIGN(len, c->min_io_size) - len; + ubifs_pad(c, node + len, pad); + } +} + +/** + * ubifs_prep_grp_node - prepare node of a group to be written to flash. + * @c: UBIFS file-system description object + * @node: the node to pad + * @len: node length + * @last: indicates the last node of the group + * + * This function prepares node at @node to be written to the media - it + * calculates node CRC and fills the common header. + */ +void ubifs_prep_grp_node(struct ubifs_info *c, void *node, int len, int last) +{ + uint32_t crc; + struct ubifs_ch *ch = node; + unsigned long long sqnum = next_sqnum(c); + + ubifs_assert(len >= UBIFS_CH_SZ); + + ch->magic = cpu_to_le32(UBIFS_NODE_MAGIC); + ch->len = cpu_to_le32(len); + if (last) + ch->group_type = UBIFS_LAST_OF_NODE_GROUP; + else + ch->group_type = UBIFS_IN_NODE_GROUP; + ch->sqnum = cpu_to_le64(sqnum); + ch->padding[0] = ch->padding[1] = 0; + crc = crc32(UBIFS_CRC32_INIT, node + 8, len - 8); + ch->crc = cpu_to_le32(crc); +} + +/** + * wbuf_timer_callback - write-buffer timer callback function. + * @data: timer data (write-buffer descriptor) + * + * This function is called when the write-buffer timer expires. + */ +static void wbuf_timer_callback_nolock(unsigned long data) +{ + struct ubifs_wbuf *wbuf = (struct ubifs_wbuf *)data; + + wbuf->need_sync = 1; + wbuf->c->need_wbuf_sync = 1; + ubifs_wake_up_bgt(wbuf->c); +} + +/** + * new_wbuf_timer - start new write-buffer timer. + * @wbuf: write-buffer descriptor + */ +static void new_wbuf_timer_nolock(struct ubifs_wbuf *wbuf) +{ + ubifs_assert(!timer_pending(&wbuf->timer)); + + if (!wbuf->timeout) + return; + + wbuf->timer.expires = jiffies + wbuf->timeout; + add_timer(&wbuf->timer); +} + +/** + * cancel_wbuf_timer - cancel write-buffer timer. + * @wbuf: write-buffer descriptor + */ +static void cancel_wbuf_timer_nolock(struct ubifs_wbuf *wbuf) +{ + /* + * If the syncer is waiting for the lock (from the background thread's + * context) and another task is changing write-buffer then the syncing + * should be canceled. + */ + wbuf->need_sync = 0; + del_timer(&wbuf->timer); +} + +/** + * ubifs_wbuf_sync_nolock - synchronize write-buffer. + * @wbuf: write-buffer to synchronize + * + * This function synchronizes write-buffer @buf and returns zero in case of + * success or a negative error code in case of failure. + */ +int ubifs_wbuf_sync_nolock(struct ubifs_wbuf *wbuf) +{ + struct ubifs_info *c = wbuf->c; + int err, dirt; + + cancel_wbuf_timer_nolock(wbuf); + if (!wbuf->used || wbuf->lnum == -1) + /* Write-buffer is empty or not seeked */ + return 0; + + dbg_io("LEB %d:%d, %d bytes", + wbuf->lnum, wbuf->offs, wbuf->used); + ubifs_assert(!(c->vfs_sb->s_flags & MS_RDONLY)); + ubifs_assert(!(wbuf->avail & 7)); + ubifs_assert(wbuf->offs + c->min_io_size <= c->leb_size); + + if (c->ro_media) + return -EROFS; + + ubifs_pad(c, wbuf->buf + wbuf->used, wbuf->avail); + err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs, + c->min_io_size, wbuf->dtype); + if (err) { + ubifs_err("cannot write %d bytes to LEB %d:%d", + c->min_io_size, wbuf->lnum, wbuf->offs); + dbg_dump_stack(); + return err; + } + + dirt = wbuf->avail; + + spin_lock(&wbuf->lock); + wbuf->offs += c->min_io_size; + wbuf->avail = c->min_io_size; + wbuf->used = 0; + wbuf->next_ino = 0; + spin_unlock(&wbuf->lock); + + if (wbuf->sync_callback) + err = wbuf->sync_callback(c, wbuf->lnum, + c->leb_size - wbuf->offs, dirt); + return err; +} + +/** + * ubifs_wbuf_seek_nolock - seek write-buffer. + * @wbuf: write-buffer + * @lnum: logical eraseblock number to seek to + * @offs: logical eraseblock offset to seek to + * @dtype: data type + * + * This function targets the write buffer to logical eraseblock @lnum:@offs. + * The write-buffer is synchronized if it is not empty. Returns zero in case of + * success and a negative error code in case of failure. + */ +int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs, + int dtype) +{ + const struct ubifs_info *c = wbuf->c; + + dbg_io("LEB %d:%d", lnum, offs); + ubifs_assert(lnum >= 0 && lnum < c->leb_cnt); + ubifs_assert(offs >= 0 && offs <= c->leb_size); + ubifs_assert(offs % c->min_io_size == 0 && !(offs & 7)); + ubifs_assert(lnum != wbuf->lnum); + + if (wbuf->used > 0) { + int err = ubifs_wbuf_sync_nolock(wbuf); + + if (err) + return err; + } + + spin_lock(&wbuf->lock); + wbuf->lnum = lnum; + wbuf->offs = offs; + wbuf->avail = c->min_io_size; + wbuf->used = 0; + spin_unlock(&wbuf->lock); + wbuf->dtype = dtype; + + return 0; +} + +/** + * ubifs_bg_wbufs_sync - synchronize write-buffers. + * @c: UBIFS file-system description object + * + * This function is called by background thread to synchronize write-buffers. + * Returns zero in case of success and a negative error code in case of + * failure. + */ +int ubifs_bg_wbufs_sync(struct ubifs_info *c) +{ + int err, i; + + if (!c->need_wbuf_sync) + return 0; + c->need_wbuf_sync = 0; + + if (c->ro_media) { + err = -EROFS; + goto out_timers; + } + + dbg_io("synchronize"); + for (i = 0; i < c->jhead_cnt; i++) { + struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf; + + cond_resched(); + + /* + * If the mutex is locked then wbuf is being changed, so + * synchronization is not necessary. + */ + if (mutex_is_locked(&wbuf->io_mutex)) + continue; + + mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); + if (!wbuf->need_sync) { + mutex_unlock(&wbuf->io_mutex); + continue; + } + + err = ubifs_wbuf_sync_nolock(wbuf); + mutex_unlock(&wbuf->io_mutex); + if (err) { + ubifs_err("cannot sync write-buffer, error %d", err); + ubifs_ro_mode(c, err); + goto out_timers; + } + } + + return 0; + +out_timers: + /* Cancel all timers to prevent repeated errors */ + for (i = 0; i < c->jhead_cnt; i++) { + struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf; + + mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); + cancel_wbuf_timer_nolock(wbuf); + mutex_unlock(&wbuf->io_mutex); + } + return err; +} + +/** + * ubifs_wbuf_write_nolock - write data to flash via write-buffer. + * @wbuf: write-buffer + * @buf: node to write + * @len: node length + * + * This function writes data to flash via write-buffer @wbuf. This means that + * the last piece of the node won't reach the flash media immediately if it + * does not take whole minimal I/O unit. Instead, the node will sit in RAM + * until the write-buffer is synchronized (e.g., by timer). + * + * This function returns zero in case of success and a negative error code in + * case of failure. If the node cannot be written because there is no more + * space in this logical eraseblock, %-ENOSPC is returned. + */ +int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len) +{ + struct ubifs_info *c = wbuf->c; + int err, written, n, aligned_len = ALIGN(len, 8), offs; + + dbg_io("%d bytes (%s) to wbuf at LEB %d:%d", len, + dbg_ntype(((struct ubifs_ch *)buf)->node_type), wbuf->lnum, + wbuf->offs + wbuf->used); + ubifs_assert(len > 0 && wbuf->lnum >= 0 && wbuf->lnum < c->leb_cnt); + ubifs_assert(wbuf->offs >= 0 && wbuf->offs % c->min_io_size == 0); + ubifs_assert(!(wbuf->offs & 7) && wbuf->offs <= c->leb_size); + ubifs_assert(wbuf->avail > 0 && wbuf->avail <= c->min_io_size); + ubifs_assert(mutex_is_locked(&wbuf->io_mutex)); + + if (c->leb_size - wbuf->offs - wbuf->used < aligned_len) { + err = -ENOSPC; + goto out; + } + + cancel_wbuf_timer_nolock(wbuf); + + if (c->ro_media) + return -EROFS; + + if (aligned_len <= wbuf->avail) { + /* + * The node is not very large and fits entirely within + * write-buffer. + */ + memcpy(wbuf->buf + wbuf->used, buf, len); + + if (aligned_len == wbuf->avail) { + dbg_io("flush wbuf to LEB %d:%d", wbuf->lnum, + wbuf->offs); + err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, + wbuf->offs, c->min_io_size, + wbuf->dtype); + if (err) + goto out; + + spin_lock(&wbuf->lock); + wbuf->offs += c->min_io_size; + wbuf->avail = c->min_io_size; + wbuf->used = 0; + wbuf->next_ino = 0; + spin_unlock(&wbuf->lock); + } else { + spin_lock(&wbuf->lock); + wbuf->avail -= aligned_len; + wbuf->used += aligned_len; + spin_unlock(&wbuf->lock); + } + + goto exit; + } + + /* + * The node is large enough and does not fit entirely within current + * minimal I/O unit. We have to fill and flush write-buffer and switch + * to the next min. I/O unit. + */ + dbg_io("flush wbuf to LEB %d:%d", wbuf->lnum, wbuf->offs); + memcpy(wbuf->buf + wbuf->used, buf, wbuf->avail); + err = ubi_leb_write(c->ubi, wbuf->lnum, wbuf->buf, wbuf->offs, + c->min_io_size, wbuf->dtype); + if (err) + goto out; + + offs = wbuf->offs + c->min_io_size; + len -= wbuf->avail; + aligned_len -= wbuf->avail; + written = wbuf->avail; + + /* + * The remaining data may take more whole min. I/O units, so write the + * remains multiple to min. I/O unit size directly to the flash media. + * We align node length to 8-byte boundary because we anyway flash wbuf + * if the remaining space is less than 8 bytes. + */ + n = aligned_len >> c->min_io_shift; + if (n) { + n <<= c->min_io_shift; + dbg_io("write %d bytes to LEB %d:%d", n, wbuf->lnum, offs); + err = ubi_leb_write(c->ubi, wbuf->lnum, buf + written, offs, n, + wbuf->dtype); + if (err) + goto out; + offs += n; + aligned_len -= n; + len -= n; + written += n; + } + + spin_lock(&wbuf->lock); + if (aligned_len) + /* + * And now we have what's left and what does not take whole + * min. I/O unit, so write it to the write-buffer and we are + * done. + */ + memcpy(wbuf->buf, buf + written, len); + + wbuf->offs = offs; + wbuf->used = aligned_len; + wbuf->avail = c->min_io_size - aligned_len; + wbuf->next_ino = 0; + spin_unlock(&wbuf->lock); + +exit: + if (wbuf->sync_callback) { + int free = c->leb_size - wbuf->offs - wbuf->used; + + err = wbuf->sync_callback(c, wbuf->lnum, free, 0); + if (err) + goto out; + } + + if (wbuf->used) + new_wbuf_timer_nolock(wbuf); + + return 0; + +out: + ubifs_err("cannot write %d bytes to LEB %d:%d, error %d", + len, wbuf->lnum, wbuf->offs, err); + dbg_dump_node(c, buf); + dbg_dump_stack(); + dbg_dump_leb(c, wbuf->lnum); + return err; +} + +/** + * ubifs_write_node - write node to the media. + * @c: UBIFS file-system description object + * @buf: the node to write + * @len: node length + * @lnum: logical eraseblock number + * @offs: offset within the logical eraseblock + * @dtype: node life-time hint (%UBI_LONGTERM, %UBI_SHORTTERM, %UBI_UNKNOWN) + * + * This function automatically fills node magic number, assigns sequence + * number, and calculates node CRC checksum. The length of the @buf buffer has + * to be aligned to the minimal I/O unit size. This function automatically + * appends padding node and padding bytes if needed. Returns zero in case of + * success and a negative error code in case of failure. + */ +int ubifs_write_node(struct ubifs_info *c, void *buf, int len, int lnum, + int offs, int dtype) +{ + int err, buf_len = ALIGN(len, c->min_io_size); + + dbg_io("LEB %d:%d, %s, length %d (aligned %d)", + lnum, offs, dbg_ntype(((struct ubifs_ch *)buf)->node_type), len, + buf_len); + ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0); + ubifs_assert(offs % c->min_io_size == 0 && offs < c->leb_size); + + if (c->ro_media) + return -EROFS; + + ubifs_prepare_node(c, buf, len, 1); + err = ubi_leb_write(c->ubi, lnum, buf, offs, buf_len, dtype); + if (err) { + ubifs_err("cannot write %d bytes to LEB %d:%d, error %d", + buf_len, lnum, offs, err); + dbg_dump_node(c, buf); + dbg_dump_stack(); + } + + return err; +} + +/** + * ubifs_read_node_wbuf - read node from the media or write-buffer. + * @wbuf: wbuf to check for un-written data + * @buf: buffer to read to + * @type: node type + * @len: node length + * @lnum: logical eraseblock number + * @offs: offset within the logical eraseblock + * + * This function reads a node of known type and length, checks it and stores + * in @buf. If the node partially or fully sits in the write-buffer, this + * function takes data from the buffer, otherwise it reads the flash media. + * Returns zero in case of success, %-EUCLEAN if CRC mismatched and a negative + * error code in case of failure. + */ +int ubifs_read_node_wbuf(struct ubifs_wbuf *wbuf, void *buf, int type, int len, + int lnum, int offs) +{ + const struct ubifs_info *c = wbuf->c; + int err, rlen, overlap; + struct ubifs_ch *ch = buf; + + dbg_io("LEB %d:%d, %s, length %d", lnum, offs, dbg_ntype(type), len); + ubifs_assert(wbuf && lnum >= 0 && lnum < c->leb_cnt && offs >= 0); + ubifs_assert(!(offs & 7) && offs < c->leb_size); + ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT); + + spin_lock(&wbuf->lock); + overlap = (lnum == wbuf->lnum && offs + len > wbuf->offs); + if (!overlap) { + /* We may safely unlock the write-buffer and read the data */ + spin_unlock(&wbuf->lock); + return ubifs_read_node(c, buf, type, len, lnum, offs); + } + + /* Don't read under wbuf */ + rlen = wbuf->offs - offs; + if (rlen < 0) + rlen = 0; + + /* Copy the rest from the write-buffer */ + memcpy(buf + rlen, wbuf->buf + offs + rlen - wbuf->offs, len - rlen); + spin_unlock(&wbuf->lock); + + if (rlen > 0) { + /* Read everything that goes before write-buffer */ + err = ubi_read(c->ubi, lnum, buf, offs, rlen); + if (err && err != -EBADMSG) { + ubifs_err("failed to read node %d from LEB %d:%d, " + "error %d", type, lnum, offs, err); + dbg_dump_stack(); + return err; + } + } + + if (type != ch->node_type) { + ubifs_err("bad node type (%d but expected %d)", + ch->node_type, type); + goto out; + } + + err = ubifs_check_node(c, buf, lnum, offs, 0); + if (err) { + ubifs_err("expected node type %d", type); + return err; + } + + rlen = le32_to_cpu(ch->len); + if (rlen != len) { + ubifs_err("bad node length %d, expected %d", rlen, len); + goto out; + } + + return 0; + +out: + ubifs_err("bad node at LEB %d:%d", lnum, offs); + dbg_dump_node(c, buf); + dbg_dump_stack(); + return -EINVAL; +} + +/** + * ubifs_read_node - read node. + * @c: UBIFS file-system description object + * @buf: buffer to read to + * @type: node type + * @len: node length (not aligned) + * @lnum: logical eraseblock number + * @offs: offset within the logical eraseblock + * + * This function reads a node of known type and and length, checks it and + * stores in @buf. Returns zero in case of success, %-EUCLEAN if CRC mismatched + * and a negative error code in case of failure. + */ +int ubifs_read_node(const struct ubifs_info *c, void *buf, int type, int len, + int lnum, int offs) +{ + int err, l; + struct ubifs_ch *ch = buf; + + dbg_io("LEB %d:%d, %s, length %d", lnum, offs, dbg_ntype(type), len); + ubifs_assert(lnum >= 0 && lnum < c->leb_cnt && offs >= 0); + ubifs_assert(len >= UBIFS_CH_SZ && offs + len <= c->leb_size); + ubifs_assert(!(offs & 7) && offs < c->leb_size); + ubifs_assert(type >= 0 && type < UBIFS_NODE_TYPES_CNT); + + err = ubi_read(c->ubi, lnum, buf, offs, len); + if (err && err != -EBADMSG) { + ubifs_err("cannot read node %d from LEB %d:%d, error %d", + type, lnum, offs, err); + return err; + } + + if (type != ch->node_type) { + ubifs_err("bad node type (%d but expected %d)", + ch->node_type, type); + goto out; + } + + err = ubifs_check_node(c, buf, lnum, offs, 0); + if (err) { + ubifs_err("expected node type %d", type); + return err; + } + + l = le32_to_cpu(ch->len); + if (l != len) { + ubifs_err("bad node length %d, expected %d", l, len); + goto out; + } + + return 0; + +out: + ubifs_err("bad node at LEB %d:%d", lnum, offs); + dbg_dump_node(c, buf); + dbg_dump_stack(); + return -EINVAL; +} + +/** + * ubifs_wbuf_init - initialize write-buffer. + * @c: UBIFS file-system description object + * @wbuf: write-buffer to initialize + * + * This function initializes write buffer. Returns zero in case of success + * %-ENOMEM in case of failure. + */ +int ubifs_wbuf_init(struct ubifs_info *c, struct ubifs_wbuf *wbuf) +{ + size_t size; + + wbuf->buf = kmalloc(c->min_io_size, GFP_KERNEL); + if (!wbuf->buf) + return -ENOMEM; + + size = (c->min_io_size / UBIFS_CH_SZ + 1) * sizeof(ino_t); + wbuf->inodes = kmalloc(size, GFP_KERNEL); + if (!wbuf->inodes) { + kfree(wbuf->buf); + wbuf->buf = NULL; + return -ENOMEM; + } + + wbuf->used = 0; + wbuf->lnum = wbuf->offs = -1; + wbuf->avail = c->min_io_size; + wbuf->dtype = UBI_UNKNOWN; + wbuf->sync_callback = NULL; + mutex_init(&wbuf->io_mutex); + spin_lock_init(&wbuf->lock); + + wbuf->c = c; + init_timer(&wbuf->timer); + wbuf->timer.function = wbuf_timer_callback_nolock; + wbuf->timer.data = (unsigned long)wbuf; + wbuf->timeout = DEFAULT_WBUF_TIMEOUT; + wbuf->next_ino = 0; + + return 0; +} + +/** + * ubifs_wbuf_add_ino_nolock - add an inode number into the wbuf inode array. + * @wbuf: the write-buffer whereto add + * @inum: the inode number + * + * This function adds an inode number to the inode array of the write-buffer. + */ +void ubifs_wbuf_add_ino_nolock(struct ubifs_wbuf *wbuf, ino_t inum) +{ + if (!wbuf->buf) + /* NOR flash or something similar */ + return; + + spin_lock(&wbuf->lock); + if (wbuf->used) + wbuf->inodes[wbuf->next_ino++] = inum; + spin_unlock(&wbuf->lock); +} + +/** + * wbuf_has_ino - returns if the wbuf contains data from the inode. + * @wbuf: the write-buffer + * @inum: the inode number + * + * This function returns with %1 if the write-buffer contains some data from the + * given inode otherwise it returns with %0. + */ +static int wbuf_has_ino(struct ubifs_wbuf *wbuf, ino_t inum) +{ + int i, ret = 0; + + spin_lock(&wbuf->lock); + for (i = 0; i < wbuf->next_ino; i++) + if (inum == wbuf->inodes[i]) { + ret = 1; + break; + } + spin_unlock(&wbuf->lock); + + return ret; +} + +/** + * ubifs_sync_wbufs_by_inode - synchronize write-buffers for an inode. + * @c: UBIFS file-system description object + * @inode: inode to synchronize + * + * This function synchronizes write-buffers which contain nodes belonging to + * @inode. Returns zero in case of success and a negative error code in case of + * failure. + */ +int ubifs_sync_wbufs_by_inode(struct ubifs_info *c, struct inode *inode) +{ + int i, err = 0; + + for (i = 0; i < c->jhead_cnt; i++) { + struct ubifs_wbuf *wbuf = &c->jheads[i].wbuf; + + if (i == GCHD) + /* + * GC head is special, do not look at it. Even if the + * head contains something related to this inode, it is + * a _copy_ of corresponding on-flash node which sits + * somewhere else. + */ + continue; + + if (!wbuf_has_ino(wbuf, inode->i_ino)) + continue; + + mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); + if (wbuf_has_ino(wbuf, inode->i_ino)) + err = ubifs_wbuf_sync_nolock(wbuf); + mutex_unlock(&wbuf->io_mutex); + + if (err) { + ubifs_ro_mode(c, err); + return err; + } + } + return 0; +} diff --git a/fs/ubifs/ioctl.c b/fs/ubifs/ioctl.c new file mode 100644 index 000000000000..5e82cffe9695 --- /dev/null +++ b/fs/ubifs/ioctl.c @@ -0,0 +1,204 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * Copyright (C) 2006, 2007 University of Szeged, Hungary + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Zoltan Sogor + * Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* This file implements EXT2-compatible extended attribute ioctl() calls */ + +#include +#include +#include +#include "ubifs.h" + +/** + * ubifs_set_inode_flags - set VFS inode flags. + * @inode: VFS inode to set flags for + * + * This function propagates flags from UBIFS inode object to VFS inode object. + */ +void ubifs_set_inode_flags(struct inode *inode) +{ + unsigned int flags = ubifs_inode(inode)->flags; + + inode->i_flags &= ~(S_SYNC | S_APPEND | S_IMMUTABLE | S_DIRSYNC); + if (flags & UBIFS_SYNC_FL) + inode->i_flags |= S_SYNC; + if (flags & UBIFS_APPEND_FL) + inode->i_flags |= S_APPEND; + if (flags & UBIFS_IMMUTABLE_FL) + inode->i_flags |= S_IMMUTABLE; + if (flags & UBIFS_DIRSYNC_FL) + inode->i_flags |= S_DIRSYNC; +} + +/* + * ioctl2ubifs - convert ioctl inode flags to UBIFS inode flags. + * @ioctl_flags: flags to convert + * + * This function convert ioctl flags (@FS_COMPR_FL, etc) to UBIFS inode flags + * (@UBIFS_COMPR_FL, etc). + */ +static int ioctl2ubifs(int ioctl_flags) +{ + int ubifs_flags = 0; + + if (ioctl_flags & FS_COMPR_FL) + ubifs_flags |= UBIFS_COMPR_FL; + if (ioctl_flags & FS_SYNC_FL) + ubifs_flags |= UBIFS_SYNC_FL; + if (ioctl_flags & FS_APPEND_FL) + ubifs_flags |= UBIFS_APPEND_FL; + if (ioctl_flags & FS_IMMUTABLE_FL) + ubifs_flags |= UBIFS_IMMUTABLE_FL; + if (ioctl_flags & FS_DIRSYNC_FL) + ubifs_flags |= UBIFS_DIRSYNC_FL; + + return ubifs_flags; +} + +/* + * ubifs2ioctl - convert UBIFS inode flags to ioctl inode flags. + * @ubifs_flags: flags to convert + * + * This function convert UBIFS (@UBIFS_COMPR_FL, etc) to ioctl flags + * (@FS_COMPR_FL, etc). + */ +static int ubifs2ioctl(int ubifs_flags) +{ + int ioctl_flags = 0; + + if (ubifs_flags & UBIFS_COMPR_FL) + ioctl_flags |= FS_COMPR_FL; + if (ubifs_flags & UBIFS_SYNC_FL) + ioctl_flags |= FS_SYNC_FL; + if (ubifs_flags & UBIFS_APPEND_FL) + ioctl_flags |= FS_APPEND_FL; + if (ubifs_flags & UBIFS_IMMUTABLE_FL) + ioctl_flags |= FS_IMMUTABLE_FL; + if (ubifs_flags & UBIFS_DIRSYNC_FL) + ioctl_flags |= FS_DIRSYNC_FL; + + return ioctl_flags; +} + +static int setflags(struct inode *inode, int flags) +{ + int oldflags, err, release; + struct ubifs_inode *ui = ubifs_inode(inode); + struct ubifs_info *c = inode->i_sb->s_fs_info; + struct ubifs_budget_req req = { .dirtied_ino = 1, + .dirtied_ino_d = ui->data_len }; + + err = ubifs_budget_space(c, &req); + if (err) + return err; + + /* + * The IMMUTABLE and APPEND_ONLY flags can only be changed by + * the relevant capability. + */ + mutex_lock(&ui->ui_mutex); + oldflags = ubifs2ioctl(ui->flags); + if ((flags ^ oldflags) & (FS_APPEND_FL | FS_IMMUTABLE_FL)) { + if (!capable(CAP_LINUX_IMMUTABLE)) { + err = -EPERM; + goto out_unlock; + } + } + + ui->flags = ioctl2ubifs(flags); + ubifs_set_inode_flags(inode); + inode->i_ctime = ubifs_current_time(inode); + release = ui->dirty; + mark_inode_dirty_sync(inode); + mutex_unlock(&ui->ui_mutex); + + if (release) + ubifs_release_budget(c, &req); + if (IS_SYNC(inode)) + err = write_inode_now(inode, 1); + return err; + +out_unlock: + ubifs_err("can't modify inode %lu attributes", inode->i_ino); + mutex_unlock(&ui->ui_mutex); + ubifs_release_budget(c, &req); + return err; +} + +long ubifs_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + int flags, err; + struct inode *inode = file->f_path.dentry->d_inode; + + switch (cmd) { + case FS_IOC_GETFLAGS: + flags = ubifs2ioctl(ubifs_inode(inode)->flags); + + return put_user(flags, (int __user *) arg); + + case FS_IOC_SETFLAGS: { + if (IS_RDONLY(inode)) + return -EROFS; + + if (!is_owner_or_cap(inode)) + return -EACCES; + + if (get_user(flags, (int __user *) arg)) + return -EFAULT; + + if (!S_ISDIR(inode->i_mode)) + flags &= ~FS_DIRSYNC_FL; + + /* + * Make sure the file-system is read-write and make sure it + * will not become read-only while we are changing the flags. + */ + err = mnt_want_write(file->f_path.mnt); + if (err) + return err; + err = setflags(inode, flags); + mnt_drop_write(file->f_path.mnt); + return err; + } + + default: + return -ENOTTY; + } +} + +#ifdef CONFIG_COMPAT +long ubifs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case FS_IOC32_GETFLAGS: + cmd = FS_IOC_GETFLAGS; + break; + case FS_IOC32_SETFLAGS: + cmd = FS_IOC_SETFLAGS; + break; + default: + return -ENOIOCTLCMD; + } + return ubifs_ioctl(file, cmd, (unsigned long)compat_ptr(arg)); +} +#endif diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c new file mode 100644 index 000000000000..283155abe5f5 --- /dev/null +++ b/fs/ubifs/journal.c @@ -0,0 +1,1387 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* + * This file implements UBIFS journal. + * + * The journal consists of 2 parts - the log and bud LEBs. The log has fixed + * length and position, while a bud logical eraseblock is any LEB in the main + * area. Buds contain file system data - data nodes, inode nodes, etc. The log + * contains only references to buds and some other stuff like commit + * start node. The idea is that when we commit the journal, we do + * not copy the data, the buds just become indexed. Since after the commit the + * nodes in bud eraseblocks become leaf nodes of the file system index tree, we + * use term "bud". Analogy is obvious, bud eraseblocks contain nodes which will + * become leafs in the future. + * + * The journal is multi-headed because we want to write data to the journal as + * optimally as possible. It is nice to have nodes belonging to the same inode + * in one LEB, so we may write data owned by different inodes to different + * journal heads, although at present only one data head is used. + * + * For recovery reasons, the base head contains all inode nodes, all directory + * entry nodes and all truncate nodes. This means that the other heads contain + * only data nodes. + * + * Bud LEBs may be half-indexed. For example, if the bud was not full at the + * time of commit, the bud is retained to continue to be used in the journal, + * even though the "front" of the LEB is now indexed. In that case, the log + * reference contains the offset where the bud starts for the purposes of the + * journal. + * + * The journal size has to be limited, because the larger is the journal, the + * longer it takes to mount UBIFS (scanning the journal) and the more memory it + * takes (indexing in the TNC). + * + * All the journal write operations like 'ubifs_jnl_update()' here, which write + * multiple UBIFS nodes to the journal at one go, are atomic with respect to + * unclean reboots. Should the unclean reboot happen, the recovery code drops + * all the nodes. + */ + +#include "ubifs.h" + +/** + * zero_ino_node_unused - zero out unused fields of an on-flash inode node. + * @ino: the inode to zero out + */ +static inline void zero_ino_node_unused(struct ubifs_ino_node *ino) +{ + memset(ino->padding1, 0, 4); + memset(ino->padding2, 0, 26); +} + +/** + * zero_dent_node_unused - zero out unused fields of an on-flash directory + * entry node. + * @dent: the directory entry to zero out + */ +static inline void zero_dent_node_unused(struct ubifs_dent_node *dent) +{ + dent->padding1 = 0; + memset(dent->padding2, 0, 4); +} + +/** + * zero_data_node_unused - zero out unused fields of an on-flash data node. + * @data: the data node to zero out + */ +static inline void zero_data_node_unused(struct ubifs_data_node *data) +{ + memset(data->padding, 0, 2); +} + +/** + * zero_trun_node_unused - zero out unused fields of an on-flash truncation + * node. + * @trun: the truncation node to zero out + */ +static inline void zero_trun_node_unused(struct ubifs_trun_node *trun) +{ + memset(trun->padding, 0, 12); +} + +/** + * reserve_space - reserve space in the journal. + * @c: UBIFS file-system description object + * @jhead: journal head number + * @len: node length + * + * This function reserves space in journal head @head. If the reservation + * succeeded, the journal head stays locked and later has to be unlocked using + * 'release_head()'. 'write_node()' and 'write_head()' functions also unlock + * it. Returns zero in case of success, %-EAGAIN if commit has to be done, and + * other negative error codes in case of other failures. + */ +static int reserve_space(struct ubifs_info *c, int jhead, int len) +{ + int err = 0, err1, retries = 0, avail, lnum, offs, free, squeeze; + struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf; + + /* + * Typically, the base head has smaller nodes written to it, so it is + * better to try to allocate space at the ends of eraseblocks. This is + * what the squeeze parameter does. + */ + squeeze = (jhead == BASEHD); +again: + mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); + + if (c->ro_media) { + err = -EROFS; + goto out_unlock; + } + + avail = c->leb_size - wbuf->offs - wbuf->used; + if (wbuf->lnum != -1 && avail >= len) + return 0; + + /* + * Write buffer wasn't seek'ed or there is no enough space - look for an + * LEB with some empty space. + */ + lnum = ubifs_find_free_space(c, len, &free, squeeze); + if (lnum >= 0) { + /* Found an LEB, add it to the journal head */ + offs = c->leb_size - free; + err = ubifs_add_bud_to_log(c, jhead, lnum, offs); + if (err) + goto out_return; + /* A new bud was successfully allocated and added to the log */ + goto out; + } + + err = lnum; + if (err != -ENOSPC) + goto out_unlock; + + /* + * No free space, we have to run garbage collector to make + * some. But the write-buffer mutex has to be unlocked because + * GC also takes it. + */ + dbg_jnl("no free space jhead %d, run GC", jhead); + mutex_unlock(&wbuf->io_mutex); + + lnum = ubifs_garbage_collect(c, 0); + if (lnum < 0) { + err = lnum; + if (err != -ENOSPC) + return err; + + /* + * GC could not make a free LEB. But someone else may + * have allocated new bud for this journal head, + * because we dropped @wbuf->io_mutex, so try once + * again. + */ + dbg_jnl("GC couldn't make a free LEB for jhead %d", jhead); + if (retries++ < 2) { + dbg_jnl("retry (%d)", retries); + goto again; + } + + dbg_jnl("return -ENOSPC"); + return err; + } + + mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); + dbg_jnl("got LEB %d for jhead %d", lnum, jhead); + avail = c->leb_size - wbuf->offs - wbuf->used; + + if (wbuf->lnum != -1 && avail >= len) { + /* + * Someone else has switched the journal head and we have + * enough space now. This happens when more then one process is + * trying to write to the same journal head at the same time. + */ + dbg_jnl("return LEB %d back, already have LEB %d:%d", + lnum, wbuf->lnum, wbuf->offs + wbuf->used); + err = ubifs_return_leb(c, lnum); + if (err) + goto out_unlock; + return 0; + } + + err = ubifs_add_bud_to_log(c, jhead, lnum, 0); + if (err) + goto out_return; + offs = 0; + +out: + err = ubifs_wbuf_seek_nolock(wbuf, lnum, offs, UBI_SHORTTERM); + if (err) + goto out_unlock; + + return 0; + +out_unlock: + mutex_unlock(&wbuf->io_mutex); + return err; + +out_return: + /* An error occurred and the LEB has to be returned to lprops */ + ubifs_assert(err < 0); + err1 = ubifs_return_leb(c, lnum); + if (err1 && err == -EAGAIN) + /* + * Return original error code only if it is not %-EAGAIN, + * which is not really an error. Otherwise, return the error + * code of 'ubifs_return_leb()'. + */ + err = err1; + mutex_unlock(&wbuf->io_mutex); + return err; +} + +/** + * write_node - write node to a journal head. + * @c: UBIFS file-system description object + * @jhead: journal head + * @node: node to write + * @len: node length + * @lnum: LEB number written is returned here + * @offs: offset written is returned here + * + * This function writes a node to reserved space of journal head @jhead. + * Returns zero in case of success and a negative error code in case of + * failure. + */ +static int write_node(struct ubifs_info *c, int jhead, void *node, int len, + int *lnum, int *offs) +{ + struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf; + + ubifs_assert(jhead != GCHD); + + *lnum = c->jheads[jhead].wbuf.lnum; + *offs = c->jheads[jhead].wbuf.offs + c->jheads[jhead].wbuf.used; + + dbg_jnl("jhead %d, LEB %d:%d, len %d", jhead, *lnum, *offs, len); + ubifs_prepare_node(c, node, len, 0); + + return ubifs_wbuf_write_nolock(wbuf, node, len); +} + +/** + * write_head - write data to a journal head. + * @c: UBIFS file-system description object + * @jhead: journal head + * @buf: buffer to write + * @len: length to write + * @lnum: LEB number written is returned here + * @offs: offset written is returned here + * @sync: non-zero if the write-buffer has to by synchronized + * + * This function is the same as 'write_node()' but it does not assume the + * buffer it is writing is a node, so it does not prepare it (which means + * initializing common header and calculating CRC). + */ +static int write_head(struct ubifs_info *c, int jhead, void *buf, int len, + int *lnum, int *offs, int sync) +{ + int err; + struct ubifs_wbuf *wbuf = &c->jheads[jhead].wbuf; + + ubifs_assert(jhead != GCHD); + + *lnum = c->jheads[jhead].wbuf.lnum; + *offs = c->jheads[jhead].wbuf.offs + c->jheads[jhead].wbuf.used; + dbg_jnl("jhead %d, LEB %d:%d, len %d", jhead, *lnum, *offs, len); + + err = ubifs_wbuf_write_nolock(wbuf, buf, len); + if (err) + return err; + if (sync) + err = ubifs_wbuf_sync_nolock(wbuf); + return err; +} + +/** + * make_reservation - reserve journal space. + * @c: UBIFS file-system description object + * @jhead: journal head + * @len: how many bytes to reserve + * + * This function makes space reservation in journal head @jhead. The function + * takes the commit lock and locks the journal head, and the caller has to + * unlock the head and finish the reservation with 'finish_reservation()'. + * Returns zero in case of success and a negative error code in case of + * failure. + * + * Note, the journal head may be unlocked as soon as the data is written, while + * the commit lock has to be released after the data has been added to the + * TNC. + */ +static int make_reservation(struct ubifs_info *c, int jhead, int len) +{ + int err, cmt_retries = 0, nospc_retries = 0; + +again: + down_read(&c->commit_sem); + err = reserve_space(c, jhead, len); + if (!err) + return 0; + up_read(&c->commit_sem); + + if (err == -ENOSPC) { + /* + * GC could not make any progress. We should try to commit + * once because it could make some dirty space and GC would + * make progress, so make the error -EAGAIN so that the below + * will commit and re-try. + */ + if (nospc_retries++ < 2) { + dbg_jnl("no space, retry"); + err = -EAGAIN; + } + + /* + * This means that the budgeting is incorrect. We always have + * to be able to write to the media, because all operations are + * budgeted. Deletions are not budgeted, though, but we reserve + * an extra LEB for them. + */ + } + + if (err != -EAGAIN) + goto out; + + /* + * -EAGAIN means that the journal is full or too large, or the above + * code wants to do one commit. Do this and re-try. + */ + if (cmt_retries > 128) { + /* + * This should not happen unless the journal size limitations + * are too tough. + */ + ubifs_err("stuck in space allocation"); + err = -ENOSPC; + goto out; + } else if (cmt_retries > 32) + ubifs_warn("too many space allocation re-tries (%d)", + cmt_retries); + + dbg_jnl("-EAGAIN, commit and retry (retried %d times)", + cmt_retries); + cmt_retries += 1; + + err = ubifs_run_commit(c); + if (err) + return err; + goto again; + +out: + ubifs_err("cannot reserve %d bytes in jhead %d, error %d", + len, jhead, err); + if (err == -ENOSPC) { + /* This are some budgeting problems, print useful information */ + down_write(&c->commit_sem); + spin_lock(&c->space_lock); + dbg_dump_stack(); + dbg_dump_budg(c); + spin_unlock(&c->space_lock); + dbg_dump_lprops(c); + cmt_retries = dbg_check_lprops(c); + up_write(&c->commit_sem); + } + return err; +} + +/** + * release_head - release a journal head. + * @c: UBIFS file-system description object + * @jhead: journal head + * + * This function releases journal head @jhead which was locked by + * the 'make_reservation()' function. It has to be called after each successful + * 'make_reservation()' invocation. + */ +static inline void release_head(struct ubifs_info *c, int jhead) +{ + mutex_unlock(&c->jheads[jhead].wbuf.io_mutex); +} + +/** + * finish_reservation - finish a reservation. + * @c: UBIFS file-system description object + * + * This function finishes journal space reservation. It must be called after + * 'make_reservation()'. + */ +static void finish_reservation(struct ubifs_info *c) +{ + up_read(&c->commit_sem); +} + +/** + * get_dent_type - translate VFS inode mode to UBIFS directory entry type. + * @mode: inode mode + */ +static int get_dent_type(int mode) +{ + switch (mode & S_IFMT) { + case S_IFREG: + return UBIFS_ITYPE_REG; + case S_IFDIR: + return UBIFS_ITYPE_DIR; + case S_IFLNK: + return UBIFS_ITYPE_LNK; + case S_IFBLK: + return UBIFS_ITYPE_BLK; + case S_IFCHR: + return UBIFS_ITYPE_CHR; + case S_IFIFO: + return UBIFS_ITYPE_FIFO; + case S_IFSOCK: + return UBIFS_ITYPE_SOCK; + default: + BUG(); + } + return 0; +} + +/** + * pack_inode - pack an inode node. + * @c: UBIFS file-system description object + * @ino: buffer in which to pack inode node + * @inode: inode to pack + * @last: indicates the last node of the group + * @last_reference: non-zero if this is a deletion inode + */ +static void pack_inode(struct ubifs_info *c, struct ubifs_ino_node *ino, + const struct inode *inode, int last, + int last_reference) +{ + int data_len = 0; + struct ubifs_inode *ui = ubifs_inode(inode); + + ino->ch.node_type = UBIFS_INO_NODE; + ino_key_init_flash(c, &ino->key, inode->i_ino); + ino->creat_sqnum = cpu_to_le64(ui->creat_sqnum); + ino->atime_sec = cpu_to_le64(inode->i_atime.tv_sec); + ino->atime_nsec = cpu_to_le32(inode->i_atime.tv_nsec); + ino->ctime_sec = cpu_to_le64(inode->i_ctime.tv_sec); + ino->ctime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec); + ino->mtime_sec = cpu_to_le64(inode->i_mtime.tv_sec); + ino->mtime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec); + ino->uid = cpu_to_le32(inode->i_uid); + ino->gid = cpu_to_le32(inode->i_gid); + ino->mode = cpu_to_le32(inode->i_mode); + ino->flags = cpu_to_le32(ui->flags); + ino->size = cpu_to_le64(ui->ui_size); + ino->nlink = cpu_to_le32(inode->i_nlink); + ino->compr_type = cpu_to_le16(ui->compr_type); + ino->data_len = cpu_to_le32(ui->data_len); + ino->xattr_cnt = cpu_to_le32(ui->xattr_cnt); + ino->xattr_size = cpu_to_le32(ui->xattr_size); + ino->xattr_names = cpu_to_le32(ui->xattr_names); + zero_ino_node_unused(ino); + + /* + * Drop the attached data if this is a deletion inode, the data is not + * needed anymore. + */ + if (!last_reference) { + memcpy(ino->data, ui->data, ui->data_len); + data_len = ui->data_len; + } + + ubifs_prep_grp_node(c, ino, UBIFS_INO_NODE_SZ + data_len, last); +} + +/** + * mark_inode_clean - mark UBIFS inode as clean. + * @c: UBIFS file-system description object + * @ui: UBIFS inode to mark as clean + * + * This helper function marks UBIFS inode @ui as clean by cleaning the + * @ui->dirty flag and releasing its budget. Note, VFS may still treat the + * inode as dirty and try to write it back, but 'ubifs_write_inode()' would + * just do nothing. + */ +static void mark_inode_clean(struct ubifs_info *c, struct ubifs_inode *ui) +{ + if (ui->dirty) + ubifs_release_dirty_inode_budget(c, ui); + ui->dirty = 0; +} + +/** + * ubifs_jnl_update - update inode. + * @c: UBIFS file-system description object + * @dir: parent inode or host inode in case of extended attributes + * @nm: directory entry name + * @inode: inode to update + * @deletion: indicates a directory entry deletion i.e unlink or rmdir + * @xent: non-zero if the directory entry is an extended attribute entry + * + * This function updates an inode by writing a directory entry (or extended + * attribute entry), the inode itself, and the parent directory inode (or the + * host inode) to the journal. + * + * The function writes the host inode @dir last, which is important in case of + * extended attributes. Indeed, then we guarantee that if the host inode gets + * synchronized (with 'fsync()'), and the write-buffer it sits in gets flushed, + * the extended attribute inode gets flushed too. And this is exactly what the + * user expects - synchronizing the host inode synchronizes its extended + * attributes. Similarly, this guarantees that if @dir is synchronized, its + * directory entry corresponding to @nm gets synchronized too. + * + * If the inode (@inode) or the parent directory (@dir) are synchronous, this + * function synchronizes the write-buffer. + * + * This function marks the @dir and @inode inodes as clean and returns zero on + * success. In case of failure, a negative error code is returned. + */ +int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir, + const struct qstr *nm, const struct inode *inode, + int deletion, int xent) +{ + int err, dlen, ilen, len, lnum, ino_offs, dent_offs; + int aligned_dlen, aligned_ilen, sync = IS_DIRSYNC(dir); + int last_reference = !!(deletion && inode->i_nlink == 0); + struct ubifs_inode *ui = ubifs_inode(inode); + struct ubifs_inode *dir_ui = ubifs_inode(dir); + struct ubifs_dent_node *dent; + struct ubifs_ino_node *ino; + union ubifs_key dent_key, ino_key; + + dbg_jnl("ino %lu, dent '%.*s', data len %d in dir ino %lu", + inode->i_ino, nm->len, nm->name, ui->data_len, dir->i_ino); + ubifs_assert(dir_ui->data_len == 0); + ubifs_assert(mutex_is_locked(&dir_ui->ui_mutex)); + + dlen = UBIFS_DENT_NODE_SZ + nm->len + 1; + ilen = UBIFS_INO_NODE_SZ; + + /* + * If the last reference to the inode is being deleted, then there is + * no need to attach and write inode data, it is being deleted anyway. + * And if the inode is being deleted, no need to synchronize + * write-buffer even if the inode is synchronous. + */ + if (!last_reference) { + ilen += ui->data_len; + sync |= IS_SYNC(inode); + } + + aligned_dlen = ALIGN(dlen, 8); + aligned_ilen = ALIGN(ilen, 8); + len = aligned_dlen + aligned_ilen + UBIFS_INO_NODE_SZ; + dent = kmalloc(len, GFP_NOFS); + if (!dent) + return -ENOMEM; + + /* Make reservation before allocating sequence numbers */ + err = make_reservation(c, BASEHD, len); + if (err) + goto out_free; + + if (!xent) { + dent->ch.node_type = UBIFS_DENT_NODE; + dent_key_init(c, &dent_key, dir->i_ino, nm); + } else { + dent->ch.node_type = UBIFS_XENT_NODE; + xent_key_init(c, &dent_key, dir->i_ino, nm); + } + + key_write(c, &dent_key, dent->key); + dent->inum = deletion ? 0 : cpu_to_le64(inode->i_ino); + dent->type = get_dent_type(inode->i_mode); + dent->nlen = cpu_to_le16(nm->len); + memcpy(dent->name, nm->name, nm->len); + dent->name[nm->len] = '\0'; + zero_dent_node_unused(dent); + ubifs_prep_grp_node(c, dent, dlen, 0); + + ino = (void *)dent + aligned_dlen; + pack_inode(c, ino, inode, 0, last_reference); + ino = (void *)ino + aligned_ilen; + pack_inode(c, ino, dir, 1, 0); + + if (last_reference) { + err = ubifs_add_orphan(c, inode->i_ino); + if (err) { + release_head(c, BASEHD); + goto out_finish; + } + } + + err = write_head(c, BASEHD, dent, len, &lnum, &dent_offs, sync); + if (err) + goto out_release; + if (!sync) { + struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; + + ubifs_wbuf_add_ino_nolock(wbuf, inode->i_ino); + ubifs_wbuf_add_ino_nolock(wbuf, dir->i_ino); + } + release_head(c, BASEHD); + kfree(dent); + + if (deletion) { + err = ubifs_tnc_remove_nm(c, &dent_key, nm); + if (err) + goto out_ro; + err = ubifs_add_dirt(c, lnum, dlen); + } else + err = ubifs_tnc_add_nm(c, &dent_key, lnum, dent_offs, dlen, nm); + if (err) + goto out_ro; + + /* + * Note, we do not remove the inode from TNC even if the last reference + * to it has just been deleted, because the inode may still be opened. + * Instead, the inode has been added to orphan lists and the orphan + * subsystem will take further care about it. + */ + ino_key_init(c, &ino_key, inode->i_ino); + ino_offs = dent_offs + aligned_dlen; + err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, ilen); + if (err) + goto out_ro; + + ino_key_init(c, &ino_key, dir->i_ino); + ino_offs += aligned_ilen; + err = ubifs_tnc_add(c, &ino_key, lnum, ino_offs, UBIFS_INO_NODE_SZ); + if (err) + goto out_ro; + + finish_reservation(c); + spin_lock(&ui->ui_lock); + ui->synced_i_size = ui->ui_size; + spin_unlock(&ui->ui_lock); + mark_inode_clean(c, ui); + mark_inode_clean(c, dir_ui); + return 0; + +out_finish: + finish_reservation(c); +out_free: + kfree(dent); + return err; + +out_release: + release_head(c, BASEHD); +out_ro: + ubifs_ro_mode(c, err); + if (last_reference) + ubifs_delete_orphan(c, inode->i_ino); + finish_reservation(c); + return err; +} + +/** + * ubifs_jnl_write_data - write a data node to the journal. + * @c: UBIFS file-system description object + * @inode: inode the data node belongs to + * @key: node key + * @buf: buffer to write + * @len: data length (must not exceed %UBIFS_BLOCK_SIZE) + * + * This function writes a data node to the journal. Returns %0 if the data node + * was successfully written, and a negative error code in case of failure. + */ +int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode, + const union ubifs_key *key, const void *buf, int len) +{ + struct ubifs_data_node *data; + int err, lnum, offs, compr_type, out_len; + int dlen = UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE * WORST_COMPR_FACTOR; + struct ubifs_inode *ui = ubifs_inode(inode); + + dbg_jnl("ino %lu, blk %u, len %d, key %s", key_inum(c, key), + key_block(c, key), len, DBGKEY(key)); + ubifs_assert(len <= UBIFS_BLOCK_SIZE); + + data = kmalloc(dlen, GFP_NOFS); + if (!data) + return -ENOMEM; + + data->ch.node_type = UBIFS_DATA_NODE; + key_write(c, key, &data->key); + data->size = cpu_to_le32(len); + zero_data_node_unused(data); + + if (!(ui->flags && UBIFS_COMPR_FL)) + /* Compression is disabled for this inode */ + compr_type = UBIFS_COMPR_NONE; + else + compr_type = ui->compr_type; + + out_len = dlen - UBIFS_DATA_NODE_SZ; + ubifs_compress(buf, len, &data->data, &out_len, &compr_type); + ubifs_assert(out_len <= UBIFS_BLOCK_SIZE); + + dlen = UBIFS_DATA_NODE_SZ + out_len; + data->compr_type = cpu_to_le16(compr_type); + + /* Make reservation before allocating sequence numbers */ + err = make_reservation(c, DATAHD, dlen); + if (err) + goto out_free; + + err = write_node(c, DATAHD, data, dlen, &lnum, &offs); + if (err) + goto out_release; + ubifs_wbuf_add_ino_nolock(&c->jheads[DATAHD].wbuf, key_inum(c, key)); + release_head(c, DATAHD); + + err = ubifs_tnc_add(c, key, lnum, offs, dlen); + if (err) + goto out_ro; + + finish_reservation(c); + kfree(data); + return 0; + +out_release: + release_head(c, DATAHD); +out_ro: + ubifs_ro_mode(c, err); + finish_reservation(c); +out_free: + kfree(data); + return err; +} + +/** + * ubifs_jnl_write_inode - flush inode to the journal. + * @c: UBIFS file-system description object + * @inode: inode to flush + * @deletion: inode has been deleted + * + * This function writes inode @inode to the journal. If the inode is + * synchronous, it also synchronizes the write-buffer. Returns zero in case of + * success and a negative error code in case of failure. + */ +int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode, + int deletion) +{ + int err, len, lnum, offs, sync = 0; + struct ubifs_ino_node *ino; + struct ubifs_inode *ui = ubifs_inode(inode); + + dbg_jnl("ino %lu%s", inode->i_ino, + deletion ? " (last reference)" : ""); + if (deletion) + ubifs_assert(inode->i_nlink == 0); + + len = UBIFS_INO_NODE_SZ; + /* + * If the inode is being deleted, do not write the attached data. No + * need to synchronize the write-buffer either. + */ + if (!deletion) { + len += ui->data_len; + sync = IS_SYNC(inode); + } + ino = kmalloc(len, GFP_NOFS); + if (!ino) + return -ENOMEM; + + /* Make reservation before allocating sequence numbers */ + err = make_reservation(c, BASEHD, len); + if (err) + goto out_free; + + pack_inode(c, ino, inode, 1, deletion); + err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync); + if (err) + goto out_release; + if (!sync) + ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, + inode->i_ino); + release_head(c, BASEHD); + + if (deletion) { + err = ubifs_tnc_remove_ino(c, inode->i_ino); + if (err) + goto out_ro; + ubifs_delete_orphan(c, inode->i_ino); + err = ubifs_add_dirt(c, lnum, len); + } else { + union ubifs_key key; + + ino_key_init(c, &key, inode->i_ino); + err = ubifs_tnc_add(c, &key, lnum, offs, len); + } + if (err) + goto out_ro; + + finish_reservation(c); + spin_lock(&ui->ui_lock); + ui->synced_i_size = ui->ui_size; + spin_unlock(&ui->ui_lock); + kfree(ino); + return 0; + +out_release: + release_head(c, BASEHD); +out_ro: + ubifs_ro_mode(c, err); + finish_reservation(c); +out_free: + kfree(ino); + return err; +} + +/** + * ubifs_jnl_rename - rename a directory entry. + * @c: UBIFS file-system description object + * @old_dir: parent inode of directory entry to rename + * @old_dentry: directory entry to rename + * @new_dir: parent inode of directory entry to rename + * @new_dentry: new directory entry (or directory entry to replace) + * @sync: non-zero if the write-buffer has to be synchronized + * + * This function implements the re-name operation which may involve writing up + * to 3 inodes and 2 directory entries. It marks the written inodes as clean + * and returns zero on success. In case of failure, a negative error code is + * returned. + */ +int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir, + const struct dentry *old_dentry, + const struct inode *new_dir, + const struct dentry *new_dentry, int sync) +{ + void *p; + union ubifs_key key; + struct ubifs_dent_node *dent, *dent2; + int err, dlen1, dlen2, ilen, lnum, offs, len; + const struct inode *old_inode = old_dentry->d_inode; + const struct inode *new_inode = new_dentry->d_inode; + int aligned_dlen1, aligned_dlen2, plen = UBIFS_INO_NODE_SZ; + int last_reference = !!(new_inode && new_inode->i_nlink == 0); + int move = (old_dir != new_dir); + struct ubifs_inode *uninitialized_var(new_ui); + + dbg_jnl("dent '%.*s' in dir ino %lu to dent '%.*s' in dir ino %lu", + old_dentry->d_name.len, old_dentry->d_name.name, + old_dir->i_ino, new_dentry->d_name.len, + new_dentry->d_name.name, new_dir->i_ino); + ubifs_assert(ubifs_inode(old_dir)->data_len == 0); + ubifs_assert(ubifs_inode(new_dir)->data_len == 0); + ubifs_assert(mutex_is_locked(&ubifs_inode(old_dir)->ui_mutex)); + ubifs_assert(mutex_is_locked(&ubifs_inode(new_dir)->ui_mutex)); + + dlen1 = UBIFS_DENT_NODE_SZ + new_dentry->d_name.len + 1; + dlen2 = UBIFS_DENT_NODE_SZ + old_dentry->d_name.len + 1; + if (new_inode) { + new_ui = ubifs_inode(new_inode); + ubifs_assert(mutex_is_locked(&new_ui->ui_mutex)); + ilen = UBIFS_INO_NODE_SZ; + if (!last_reference) + ilen += new_ui->data_len; + } else + ilen = 0; + + aligned_dlen1 = ALIGN(dlen1, 8); + aligned_dlen2 = ALIGN(dlen2, 8); + len = aligned_dlen1 + aligned_dlen2 + ALIGN(ilen, 8) + ALIGN(plen, 8); + if (old_dir != new_dir) + len += plen; + dent = kmalloc(len, GFP_NOFS); + if (!dent) + return -ENOMEM; + + /* Make reservation before allocating sequence numbers */ + err = make_reservation(c, BASEHD, len); + if (err) + goto out_free; + + /* Make new dent */ + dent->ch.node_type = UBIFS_DENT_NODE; + dent_key_init_flash(c, &dent->key, new_dir->i_ino, &new_dentry->d_name); + dent->inum = cpu_to_le64(old_inode->i_ino); + dent->type = get_dent_type(old_inode->i_mode); + dent->nlen = cpu_to_le16(new_dentry->d_name.len); + memcpy(dent->name, new_dentry->d_name.name, new_dentry->d_name.len); + dent->name[new_dentry->d_name.len] = '\0'; + zero_dent_node_unused(dent); + ubifs_prep_grp_node(c, dent, dlen1, 0); + + /* Make deletion dent */ + dent2 = (void *)dent + aligned_dlen1; + dent2->ch.node_type = UBIFS_DENT_NODE; + dent_key_init_flash(c, &dent2->key, old_dir->i_ino, + &old_dentry->d_name); + dent2->inum = 0; + dent2->type = DT_UNKNOWN; + dent2->nlen = cpu_to_le16(old_dentry->d_name.len); + memcpy(dent2->name, old_dentry->d_name.name, old_dentry->d_name.len); + dent2->name[old_dentry->d_name.len] = '\0'; + zero_dent_node_unused(dent2); + ubifs_prep_grp_node(c, dent2, dlen2, 0); + + p = (void *)dent2 + aligned_dlen2; + if (new_inode) { + pack_inode(c, p, new_inode, 0, last_reference); + p += ALIGN(ilen, 8); + } + + if (!move) + pack_inode(c, p, old_dir, 1, 0); + else { + pack_inode(c, p, old_dir, 0, 0); + p += ALIGN(plen, 8); + pack_inode(c, p, new_dir, 1, 0); + } + + if (last_reference) { + err = ubifs_add_orphan(c, new_inode->i_ino); + if (err) { + release_head(c, BASEHD); + goto out_finish; + } + } + + err = write_head(c, BASEHD, dent, len, &lnum, &offs, sync); + if (err) + goto out_release; + if (!sync) { + struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; + + ubifs_wbuf_add_ino_nolock(wbuf, new_dir->i_ino); + ubifs_wbuf_add_ino_nolock(wbuf, old_dir->i_ino); + if (new_inode) + ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, + new_inode->i_ino); + } + release_head(c, BASEHD); + + dent_key_init(c, &key, new_dir->i_ino, &new_dentry->d_name); + err = ubifs_tnc_add_nm(c, &key, lnum, offs, dlen1, &new_dentry->d_name); + if (err) + goto out_ro; + + err = ubifs_add_dirt(c, lnum, dlen2); + if (err) + goto out_ro; + + dent_key_init(c, &key, old_dir->i_ino, &old_dentry->d_name); + err = ubifs_tnc_remove_nm(c, &key, &old_dentry->d_name); + if (err) + goto out_ro; + + offs += aligned_dlen1 + aligned_dlen2; + if (new_inode) { + ino_key_init(c, &key, new_inode->i_ino); + err = ubifs_tnc_add(c, &key, lnum, offs, ilen); + if (err) + goto out_ro; + offs += ALIGN(ilen, 8); + } + + ino_key_init(c, &key, old_dir->i_ino); + err = ubifs_tnc_add(c, &key, lnum, offs, plen); + if (err) + goto out_ro; + + if (old_dir != new_dir) { + offs += ALIGN(plen, 8); + ino_key_init(c, &key, new_dir->i_ino); + err = ubifs_tnc_add(c, &key, lnum, offs, plen); + if (err) + goto out_ro; + } + + finish_reservation(c); + if (new_inode) { + mark_inode_clean(c, new_ui); + spin_lock(&new_ui->ui_lock); + new_ui->synced_i_size = new_ui->ui_size; + spin_unlock(&new_ui->ui_lock); + } + mark_inode_clean(c, ubifs_inode(old_dir)); + if (move) + mark_inode_clean(c, ubifs_inode(new_dir)); + kfree(dent); + return 0; + +out_release: + release_head(c, BASEHD); +out_ro: + ubifs_ro_mode(c, err); + if (last_reference) + ubifs_delete_orphan(c, new_inode->i_ino); +out_finish: + finish_reservation(c); +out_free: + kfree(dent); + return err; +} + +/** + * recomp_data_node - re-compress a truncated data node. + * @dn: data node to re-compress + * @new_len: new length + * + * This function is used when an inode is truncated and the last data node of + * the inode has to be re-compressed and re-written. + */ +static int recomp_data_node(struct ubifs_data_node *dn, int *new_len) +{ + void *buf; + int err, len, compr_type, out_len; + + out_len = le32_to_cpu(dn->size); + buf = kmalloc(out_len * WORST_COMPR_FACTOR, GFP_NOFS); + if (!buf) + return -ENOMEM; + + len = le32_to_cpu(dn->ch.len) - UBIFS_DATA_NODE_SZ; + compr_type = le16_to_cpu(dn->compr_type); + err = ubifs_decompress(&dn->data, len, buf, &out_len, compr_type); + if (err) + goto out; + + ubifs_compress(buf, *new_len, &dn->data, &out_len, &compr_type); + ubifs_assert(out_len <= UBIFS_BLOCK_SIZE); + dn->compr_type = cpu_to_le16(compr_type); + dn->size = cpu_to_le32(*new_len); + *new_len = UBIFS_DATA_NODE_SZ + out_len; +out: + kfree(buf); + return err; +} + +/** + * ubifs_jnl_truncate - update the journal for a truncation. + * @c: UBIFS file-system description object + * @inode: inode to truncate + * @old_size: old size + * @new_size: new size + * + * When the size of a file decreases due to truncation, a truncation node is + * written, the journal tree is updated, and the last data block is re-written + * if it has been affected. The inode is also updated in order to synchronize + * the new inode size. + * + * This function marks the inode as clean and returns zero on success. In case + * of failure, a negative error code is returned. + */ +int ubifs_jnl_truncate(struct ubifs_info *c, const struct inode *inode, + loff_t old_size, loff_t new_size) +{ + union ubifs_key key, to_key; + struct ubifs_ino_node *ino; + struct ubifs_trun_node *trun; + struct ubifs_data_node *uninitialized_var(dn); + int err, dlen, len, lnum, offs, bit, sz, sync = IS_SYNC(inode); + struct ubifs_inode *ui = ubifs_inode(inode); + ino_t inum = inode->i_ino; + unsigned int blk; + + dbg_jnl("ino %lu, size %lld -> %lld", inum, old_size, new_size); + ubifs_assert(!ui->data_len); + ubifs_assert(S_ISREG(inode->i_mode)); + ubifs_assert(mutex_is_locked(&ui->ui_mutex)); + + sz = UBIFS_TRUN_NODE_SZ + UBIFS_INO_NODE_SZ + + UBIFS_MAX_DATA_NODE_SZ * WORST_COMPR_FACTOR; + ino = kmalloc(sz, GFP_NOFS); + if (!ino) + return -ENOMEM; + + trun = (void *)ino + UBIFS_INO_NODE_SZ; + trun->ch.node_type = UBIFS_TRUN_NODE; + trun->inum = cpu_to_le32(inum); + trun->old_size = cpu_to_le64(old_size); + trun->new_size = cpu_to_le64(new_size); + zero_trun_node_unused(trun); + + dlen = new_size & (UBIFS_BLOCK_SIZE - 1); + if (dlen) { + /* Get last data block so it can be truncated */ + dn = (void *)trun + UBIFS_TRUN_NODE_SZ; + blk = new_size >> UBIFS_BLOCK_SHIFT; + data_key_init(c, &key, inum, blk); + dbg_jnl("last block key %s", DBGKEY(&key)); + err = ubifs_tnc_lookup(c, &key, dn); + if (err == -ENOENT) + dlen = 0; /* Not found (so it is a hole) */ + else if (err) + goto out_free; + else { + if (le32_to_cpu(dn->size) <= dlen) + dlen = 0; /* Nothing to do */ + else { + int compr_type = le16_to_cpu(dn->compr_type); + + if (compr_type != UBIFS_COMPR_NONE) { + err = recomp_data_node(dn, &dlen); + if (err) + goto out_free; + } else { + dn->size = cpu_to_le32(dlen); + dlen += UBIFS_DATA_NODE_SZ; + } + zero_data_node_unused(dn); + } + } + } + + /* Must make reservation before allocating sequence numbers */ + len = UBIFS_TRUN_NODE_SZ + UBIFS_INO_NODE_SZ; + if (dlen) + len += dlen; + err = make_reservation(c, BASEHD, len); + if (err) + goto out_free; + + pack_inode(c, ino, inode, 0, 0); + ubifs_prep_grp_node(c, trun, UBIFS_TRUN_NODE_SZ, dlen ? 0 : 1); + if (dlen) + ubifs_prep_grp_node(c, dn, dlen, 1); + + err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync); + if (err) + goto out_release; + if (!sync) + ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, inum); + release_head(c, BASEHD); + + if (dlen) { + sz = offs + UBIFS_INO_NODE_SZ + UBIFS_TRUN_NODE_SZ; + err = ubifs_tnc_add(c, &key, lnum, sz, dlen); + if (err) + goto out_ro; + } + + ino_key_init(c, &key, inum); + err = ubifs_tnc_add(c, &key, lnum, offs, UBIFS_INO_NODE_SZ); + if (err) + goto out_ro; + + err = ubifs_add_dirt(c, lnum, UBIFS_TRUN_NODE_SZ); + if (err) + goto out_ro; + + bit = new_size & (UBIFS_BLOCK_SIZE - 1); + blk = (new_size >> UBIFS_BLOCK_SHIFT) + (bit ? 1 : 0); + data_key_init(c, &key, inum, blk); + + bit = old_size & (UBIFS_BLOCK_SIZE - 1); + blk = (old_size >> UBIFS_BLOCK_SHIFT) - (bit ? 0: 1); + data_key_init(c, &to_key, inum, blk); + + err = ubifs_tnc_remove_range(c, &key, &to_key); + if (err) + goto out_ro; + + finish_reservation(c); + spin_lock(&ui->ui_lock); + ui->synced_i_size = ui->ui_size; + spin_unlock(&ui->ui_lock); + mark_inode_clean(c, ui); + kfree(ino); + return 0; + +out_release: + release_head(c, BASEHD); +out_ro: + ubifs_ro_mode(c, err); + finish_reservation(c); +out_free: + kfree(ino); + return err; +} + +#ifdef CONFIG_UBIFS_FS_XATTR + +/** + * ubifs_jnl_delete_xattr - delete an extended attribute. + * @c: UBIFS file-system description object + * @host: host inode + * @inode: extended attribute inode + * @nm: extended attribute entry name + * + * This function delete an extended attribute which is very similar to + * un-linking regular files - it writes a deletion xentry, a deletion inode and + * updates the target inode. Returns zero in case of success and a negative + * error code in case of failure. + */ +int ubifs_jnl_delete_xattr(struct ubifs_info *c, const struct inode *host, + const struct inode *inode, const struct qstr *nm) +{ + int err, xlen, hlen, len, lnum, xent_offs, aligned_xlen; + struct ubifs_dent_node *xent; + struct ubifs_ino_node *ino; + union ubifs_key xent_key, key1, key2; + int sync = IS_DIRSYNC(host); + struct ubifs_inode *host_ui = ubifs_inode(host); + + dbg_jnl("host %lu, xattr ino %lu, name '%s', data len %d", + host->i_ino, inode->i_ino, nm->name, + ubifs_inode(inode)->data_len); + ubifs_assert(inode->i_nlink == 0); + ubifs_assert(mutex_is_locked(&host_ui->ui_mutex)); + + /* + * Since we are deleting the inode, we do not bother to attach any data + * to it and assume its length is %UBIFS_INO_NODE_SZ. + */ + xlen = UBIFS_DENT_NODE_SZ + nm->len + 1; + aligned_xlen = ALIGN(xlen, 8); + hlen = host_ui->data_len + UBIFS_INO_NODE_SZ; + len = aligned_xlen + UBIFS_INO_NODE_SZ + ALIGN(hlen, 8); + + xent = kmalloc(len, GFP_NOFS); + if (!xent) + return -ENOMEM; + + /* Make reservation before allocating sequence numbers */ + err = make_reservation(c, BASEHD, len); + if (err) { + kfree(xent); + return err; + } + + xent->ch.node_type = UBIFS_XENT_NODE; + xent_key_init(c, &xent_key, host->i_ino, nm); + key_write(c, &xent_key, xent->key); + xent->inum = 0; + xent->type = get_dent_type(inode->i_mode); + xent->nlen = cpu_to_le16(nm->len); + memcpy(xent->name, nm->name, nm->len); + xent->name[nm->len] = '\0'; + zero_dent_node_unused(xent); + ubifs_prep_grp_node(c, xent, xlen, 0); + + ino = (void *)xent + aligned_xlen; + pack_inode(c, ino, inode, 0, 1); + ino = (void *)ino + UBIFS_INO_NODE_SZ; + pack_inode(c, ino, host, 1, 0); + + err = write_head(c, BASEHD, xent, len, &lnum, &xent_offs, sync); + if (!sync && !err) + ubifs_wbuf_add_ino_nolock(&c->jheads[BASEHD].wbuf, host->i_ino); + release_head(c, BASEHD); + kfree(xent); + if (err) + goto out_ro; + + /* Remove the extended attribute entry from TNC */ + err = ubifs_tnc_remove_nm(c, &xent_key, nm); + if (err) + goto out_ro; + err = ubifs_add_dirt(c, lnum, xlen); + if (err) + goto out_ro; + + /* + * Remove all nodes belonging to the extended attribute inode from TNC. + * Well, there actually must be only one node - the inode itself. + */ + lowest_ino_key(c, &key1, inode->i_ino); + highest_ino_key(c, &key2, inode->i_ino); + err = ubifs_tnc_remove_range(c, &key1, &key2); + if (err) + goto out_ro; + err = ubifs_add_dirt(c, lnum, UBIFS_INO_NODE_SZ); + if (err) + goto out_ro; + + /* And update TNC with the new host inode position */ + ino_key_init(c, &key1, host->i_ino); + err = ubifs_tnc_add(c, &key1, lnum, xent_offs + len - hlen, hlen); + if (err) + goto out_ro; + + finish_reservation(c); + spin_lock(&host_ui->ui_lock); + host_ui->synced_i_size = host_ui->ui_size; + spin_unlock(&host_ui->ui_lock); + mark_inode_clean(c, host_ui); + return 0; + +out_ro: + ubifs_ro_mode(c, err); + finish_reservation(c); + return err; +} + +/** + * ubifs_jnl_change_xattr - change an extended attribute. + * @c: UBIFS file-system description object + * @inode: extended attribute inode + * @host: host inode + * + * This function writes the updated version of an extended attribute inode and + * the host inode tho the journal (to the base head). The host inode is written + * after the extended attribute inode in order to guarantee that the extended + * attribute will be flushed when the inode is synchronized by 'fsync()' and + * consequently, the write-buffer is synchronized. This function returns zero + * in case of success and a negative error code in case of failure. + */ +int ubifs_jnl_change_xattr(struct ubifs_info *c, const struct inode *inode, + const struct inode *host) +{ + int err, len1, len2, aligned_len, aligned_len1, lnum, offs; + struct ubifs_inode *host_ui = ubifs_inode(inode); + struct ubifs_ino_node *ino; + union ubifs_key key; + int sync = IS_DIRSYNC(host); + + dbg_jnl("ino %lu, ino %lu", host->i_ino, inode->i_ino); + ubifs_assert(host->i_nlink > 0); + ubifs_assert(inode->i_nlink > 0); + ubifs_assert(mutex_is_locked(&host_ui->ui_mutex)); + + len1 = UBIFS_INO_NODE_SZ + host_ui->data_len; + len2 = UBIFS_INO_NODE_SZ + ubifs_inode(inode)->data_len; + aligned_len1 = ALIGN(len1, 8); + aligned_len = aligned_len1 + ALIGN(len2, 8); + + ino = kmalloc(aligned_len, GFP_NOFS); + if (!ino) + return -ENOMEM; + + /* Make reservation before allocating sequence numbers */ + err = make_reservation(c, BASEHD, aligned_len); + if (err) + goto out_free; + + pack_inode(c, ino, host, 0, 0); + pack_inode(c, (void *)ino + aligned_len1, inode, 1, 0); + + err = write_head(c, BASEHD, ino, aligned_len, &lnum, &offs, 0); + if (!sync && !err) { + struct ubifs_wbuf *wbuf = &c->jheads[BASEHD].wbuf; + + ubifs_wbuf_add_ino_nolock(wbuf, host->i_ino); + ubifs_wbuf_add_ino_nolock(wbuf, inode->i_ino); + } + release_head(c, BASEHD); + if (err) + goto out_ro; + + ino_key_init(c, &key, host->i_ino); + err = ubifs_tnc_add(c, &key, lnum, offs, len1); + if (err) + goto out_ro; + + ino_key_init(c, &key, inode->i_ino); + err = ubifs_tnc_add(c, &key, lnum, offs + aligned_len1, len2); + if (err) + goto out_ro; + + finish_reservation(c); + spin_lock(&host_ui->ui_lock); + host_ui->synced_i_size = host_ui->ui_size; + spin_unlock(&host_ui->ui_lock); + mark_inode_clean(c, host_ui); + kfree(ino); + return 0; + +out_ro: + ubifs_ro_mode(c, err); + finish_reservation(c); +out_free: + kfree(ino); + return err; +} + +#endif /* CONFIG_UBIFS_FS_XATTR */ diff --git a/fs/ubifs/key.h b/fs/ubifs/key.h new file mode 100644 index 000000000000..8f7476007549 --- /dev/null +++ b/fs/ubifs/key.h @@ -0,0 +1,533 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* + * This header contains various key-related definitions and helper function. + * UBIFS allows several key schemes, so we access key fields only via these + * helpers. At the moment only one key scheme is supported. + * + * Simple key scheme + * ~~~~~~~~~~~~~~~~~ + * + * Keys are 64-bits long. First 32-bits are inode number (parent inode number + * in case of direntry key). Next 3 bits are node type. The last 29 bits are + * 4KiB offset in case of inode node, and direntry hash in case of a direntry + * node. We use "r5" hash borrowed from reiserfs. + */ + +#ifndef __UBIFS_KEY_H__ +#define __UBIFS_KEY_H__ + +/** + * key_r5_hash - R5 hash function (borrowed from reiserfs). + * @s: direntry name + * @len: name length + */ +static inline uint32_t key_r5_hash(const char *s, int len) +{ + uint32_t a = 0; + const signed char *str = (const signed char *)s; + + while (*str) { + a += *str << 4; + a += *str >> 4; + a *= 11; + str++; + } + + a &= UBIFS_S_KEY_HASH_MASK; + + /* + * We use hash values as offset in directories, so values %0 and %1 are + * reserved for "." and "..". %2 is reserved for "end of readdir" + * marker. + */ + if (unlikely(a >= 0 && a <= 2)) + a += 3; + return a; +} + +/** + * key_test_hash - testing hash function. + * @str: direntry name + * @len: name length + */ +static inline uint32_t key_test_hash(const char *str, int len) +{ + uint32_t a = 0; + + len = min_t(uint32_t, len, 4); + memcpy(&a, str, len); + a &= UBIFS_S_KEY_HASH_MASK; + if (unlikely(a >= 0 && a <= 2)) + a += 3; + return a; +} + +/** + * ino_key_init - initialize inode key. + * @c: UBIFS file-system description object + * @key: key to initialize + * @inum: inode number + */ +static inline void ino_key_init(const struct ubifs_info *c, + union ubifs_key *key, ino_t inum) +{ + key->u32[0] = inum; + key->u32[1] = UBIFS_INO_KEY << UBIFS_S_KEY_BLOCK_BITS; +} + +/** + * ino_key_init_flash - initialize on-flash inode key. + * @c: UBIFS file-system description object + * @k: key to initialize + * @inum: inode number + */ +static inline void ino_key_init_flash(const struct ubifs_info *c, void *k, + ino_t inum) +{ + union ubifs_key *key = k; + + key->j32[0] = cpu_to_le32(inum); + key->j32[1] = cpu_to_le32(UBIFS_INO_KEY << UBIFS_S_KEY_BLOCK_BITS); + memset(k + 8, 0, UBIFS_MAX_KEY_LEN - 8); +} + +/** + * lowest_ino_key - get the lowest possible inode key. + * @c: UBIFS file-system description object + * @key: key to initialize + * @inum: inode number + */ +static inline void lowest_ino_key(const struct ubifs_info *c, + union ubifs_key *key, ino_t inum) +{ + key->u32[0] = inum; + key->u32[1] = 0; +} + +/** + * highest_ino_key - get the highest possible inode key. + * @c: UBIFS file-system description object + * @key: key to initialize + * @inum: inode number + */ +static inline void highest_ino_key(const struct ubifs_info *c, + union ubifs_key *key, ino_t inum) +{ + key->u32[0] = inum; + key->u32[1] = 0xffffffff; +} + +/** + * dent_key_init - initialize directory entry key. + * @c: UBIFS file-system description object + * @key: key to initialize + * @inum: parent inode number + * @nm: direntry name and length + */ +static inline void dent_key_init(const struct ubifs_info *c, + union ubifs_key *key, ino_t inum, + const struct qstr *nm) +{ + uint32_t hash = c->key_hash(nm->name, nm->len); + + ubifs_assert(!(hash & ~UBIFS_S_KEY_HASH_MASK)); + key->u32[0] = inum; + key->u32[1] = hash | (UBIFS_DENT_KEY << UBIFS_S_KEY_HASH_BITS); +} + +/** + * dent_key_init_hash - initialize directory entry key without re-calculating + * hash function. + * @c: UBIFS file-system description object + * @key: key to initialize + * @inum: parent inode number + * @hash: direntry name hash + */ +static inline void dent_key_init_hash(const struct ubifs_info *c, + union ubifs_key *key, ino_t inum, + uint32_t hash) +{ + ubifs_assert(!(hash & ~UBIFS_S_KEY_HASH_MASK)); + key->u32[0] = inum; + key->u32[1] = hash | (UBIFS_DENT_KEY << UBIFS_S_KEY_HASH_BITS); +} + +/** + * dent_key_init_flash - initialize on-flash directory entry key. + * @c: UBIFS file-system description object + * @k: key to initialize + * @inum: parent inode number + * @nm: direntry name and length + */ +static inline void dent_key_init_flash(const struct ubifs_info *c, void *k, + ino_t inum, const struct qstr *nm) +{ + union ubifs_key *key = k; + uint32_t hash = c->key_hash(nm->name, nm->len); + + ubifs_assert(!(hash & ~UBIFS_S_KEY_HASH_MASK)); + key->j32[0] = cpu_to_le32(inum); + key->j32[1] = cpu_to_le32(hash | + (UBIFS_DENT_KEY << UBIFS_S_KEY_HASH_BITS)); + memset(k + 8, 0, UBIFS_MAX_KEY_LEN - 8); +} + +/** + * lowest_dent_key - get the lowest possible directory entry key. + * @c: UBIFS file-system description object + * @key: where to store the lowest key + * @inum: parent inode number + */ +static inline void lowest_dent_key(const struct ubifs_info *c, + union ubifs_key *key, ino_t inum) +{ + key->u32[0] = inum; + key->u32[1] = UBIFS_DENT_KEY << UBIFS_S_KEY_HASH_BITS; +} + +/** + * xent_key_init - initialize extended attribute entry key. + * @c: UBIFS file-system description object + * @key: key to initialize + * @inum: host inode number + * @nm: extended attribute entry name and length + */ +static inline void xent_key_init(const struct ubifs_info *c, + union ubifs_key *key, ino_t inum, + const struct qstr *nm) +{ + uint32_t hash = c->key_hash(nm->name, nm->len); + + ubifs_assert(!(hash & ~UBIFS_S_KEY_HASH_MASK)); + key->u32[0] = inum; + key->u32[1] = hash | (UBIFS_XENT_KEY << UBIFS_S_KEY_HASH_BITS); +} + +/** + * xent_key_init_hash - initialize extended attribute entry key without + * re-calculating hash function. + * @c: UBIFS file-system description object + * @key: key to initialize + * @inum: host inode number + * @hash: extended attribute entry name hash + */ +static inline void xent_key_init_hash(const struct ubifs_info *c, + union ubifs_key *key, ino_t inum, + uint32_t hash) +{ + ubifs_assert(!(hash & ~UBIFS_S_KEY_HASH_MASK)); + key->u32[0] = inum; + key->u32[1] = hash | (UBIFS_XENT_KEY << UBIFS_S_KEY_HASH_BITS); +} + +/** + * xent_key_init_flash - initialize on-flash extended attribute entry key. + * @c: UBIFS file-system description object + * @k: key to initialize + * @inum: host inode number + * @nm: extended attribute entry name and length + */ +static inline void xent_key_init_flash(const struct ubifs_info *c, void *k, + ino_t inum, const struct qstr *nm) +{ + union ubifs_key *key = k; + uint32_t hash = c->key_hash(nm->name, nm->len); + + ubifs_assert(!(hash & ~UBIFS_S_KEY_HASH_MASK)); + key->j32[0] = cpu_to_le32(inum); + key->j32[1] = cpu_to_le32(hash | + (UBIFS_XENT_KEY << UBIFS_S_KEY_HASH_BITS)); + memset(k + 8, 0, UBIFS_MAX_KEY_LEN - 8); +} + +/** + * lowest_xent_key - get the lowest possible extended attribute entry key. + * @c: UBIFS file-system description object + * @key: where to store the lowest key + * @inum: host inode number + */ +static inline void lowest_xent_key(const struct ubifs_info *c, + union ubifs_key *key, ino_t inum) +{ + key->u32[0] = inum; + key->u32[1] = UBIFS_XENT_KEY << UBIFS_S_KEY_HASH_BITS; +} + +/** + * data_key_init - initialize data key. + * @c: UBIFS file-system description object + * @key: key to initialize + * @inum: inode number + * @block: block number + */ +static inline void data_key_init(const struct ubifs_info *c, + union ubifs_key *key, ino_t inum, + unsigned int block) +{ + ubifs_assert(!(block & ~UBIFS_S_KEY_BLOCK_MASK)); + key->u32[0] = inum; + key->u32[1] = block | (UBIFS_DATA_KEY << UBIFS_S_KEY_BLOCK_BITS); +} + +/** + * data_key_init_flash - initialize on-flash data key. + * @c: UBIFS file-system description object + * @k: key to initialize + * @inum: inode number + * @block: block number + */ +static inline void data_key_init_flash(const struct ubifs_info *c, void *k, + ino_t inum, unsigned int block) +{ + union ubifs_key *key = k; + + ubifs_assert(!(block & ~UBIFS_S_KEY_BLOCK_MASK)); + key->j32[0] = cpu_to_le32(inum); + key->j32[1] = cpu_to_le32(block | + (UBIFS_DATA_KEY << UBIFS_S_KEY_BLOCK_BITS)); + memset(k + 8, 0, UBIFS_MAX_KEY_LEN - 8); +} + +/** + * trun_key_init - initialize truncation node key. + * @c: UBIFS file-system description object + * @key: key to initialize + * @inum: inode number + * + * Note, UBIFS does not have truncation keys on the media and this function is + * only used for purposes of replay. + */ +static inline void trun_key_init(const struct ubifs_info *c, + union ubifs_key *key, ino_t inum) +{ + key->u32[0] = inum; + key->u32[1] = UBIFS_TRUN_KEY << UBIFS_S_KEY_BLOCK_BITS; +} + +/** + * key_type - get key type. + * @c: UBIFS file-system description object + * @key: key to get type of + */ +static inline int key_type(const struct ubifs_info *c, + const union ubifs_key *key) +{ + return key->u32[1] >> UBIFS_S_KEY_BLOCK_BITS; +} + +/** + * key_type_flash - get type of a on-flash formatted key. + * @c: UBIFS file-system description object + * @k: key to get type of + */ +static inline int key_type_flash(const struct ubifs_info *c, const void *k) +{ + const union ubifs_key *key = k; + + return le32_to_cpu(key->u32[1]) >> UBIFS_S_KEY_BLOCK_BITS; +} + +/** + * key_inum - fetch inode number from key. + * @c: UBIFS file-system description object + * @k: key to fetch inode number from + */ +static inline ino_t key_inum(const struct ubifs_info *c, const void *k) +{ + const union ubifs_key *key = k; + + return key->u32[0]; +} + +/** + * key_inum_flash - fetch inode number from an on-flash formatted key. + * @c: UBIFS file-system description object + * @k: key to fetch inode number from + */ +static inline ino_t key_inum_flash(const struct ubifs_info *c, const void *k) +{ + const union ubifs_key *key = k; + + return le32_to_cpu(key->j32[0]); +} + +/** + * key_hash - get directory entry hash. + * @c: UBIFS file-system description object + * @key: the key to get hash from + */ +static inline int key_hash(const struct ubifs_info *c, + const union ubifs_key *key) +{ + return key->u32[1] & UBIFS_S_KEY_HASH_MASK; +} + +/** + * key_hash_flash - get directory entry hash from an on-flash formatted key. + * @c: UBIFS file-system description object + * @k: the key to get hash from + */ +static inline int key_hash_flash(const struct ubifs_info *c, const void *k) +{ + const union ubifs_key *key = k; + + return le32_to_cpu(key->j32[1]) & UBIFS_S_KEY_HASH_MASK; +} + +/** + * key_block - get data block number. + * @c: UBIFS file-system description object + * @key: the key to get the block number from + */ +static inline unsigned int key_block(const struct ubifs_info *c, + const union ubifs_key *key) +{ + return key->u32[1] & UBIFS_S_KEY_BLOCK_MASK; +} + +/** + * key_block_flash - get data block number from an on-flash formatted key. + * @c: UBIFS file-system description object + * @k: the key to get the block number from + */ +static inline unsigned int key_block_flash(const struct ubifs_info *c, + const void *k) +{ + const union ubifs_key *key = k; + + return le32_to_cpu(key->u32[1]) & UBIFS_S_KEY_BLOCK_MASK; +} + +/** + * key_read - transform a key to in-memory format. + * @c: UBIFS file-system description object + * @from: the key to transform + * @to: the key to store the result + */ +static inline void key_read(const struct ubifs_info *c, const void *from, + union ubifs_key *to) +{ + const union ubifs_key *f = from; + + to->u32[0] = le32_to_cpu(f->j32[0]); + to->u32[1] = le32_to_cpu(f->j32[1]); +} + +/** + * key_write - transform a key from in-memory format. + * @c: UBIFS file-system description object + * @from: the key to transform + * @to: the key to store the result + */ +static inline void key_write(const struct ubifs_info *c, + const union ubifs_key *from, void *to) +{ + union ubifs_key *t = to; + + t->j32[0] = cpu_to_le32(from->u32[0]); + t->j32[1] = cpu_to_le32(from->u32[1]); + memset(to + 8, 0, UBIFS_MAX_KEY_LEN - 8); +} + +/** + * key_write_idx - transform a key from in-memory format for the index. + * @c: UBIFS file-system description object + * @from: the key to transform + * @to: the key to store the result + */ +static inline void key_write_idx(const struct ubifs_info *c, + const union ubifs_key *from, void *to) +{ + union ubifs_key *t = to; + + t->j32[0] = cpu_to_le32(from->u32[0]); + t->j32[1] = cpu_to_le32(from->u32[1]); +} + +/** + * key_copy - copy a key. + * @c: UBIFS file-system description object + * @from: the key to copy from + * @to: the key to copy to + */ +static inline void key_copy(const struct ubifs_info *c, + const union ubifs_key *from, union ubifs_key *to) +{ + to->u64[0] = from->u64[0]; +} + +/** + * keys_cmp - compare keys. + * @c: UBIFS file-system description object + * @key1: the first key to compare + * @key2: the second key to compare + * + * This function compares 2 keys and returns %-1 if @key1 is less than + * @key2, 0 if the keys are equivalent and %1 if @key1 is greater than @key2. + */ +static inline int keys_cmp(const struct ubifs_info *c, + const union ubifs_key *key1, + const union ubifs_key *key2) +{ + if (key1->u32[0] < key2->u32[0]) + return -1; + if (key1->u32[0] > key2->u32[0]) + return 1; + if (key1->u32[1] < key2->u32[1]) + return -1; + if (key1->u32[1] > key2->u32[1]) + return 1; + + return 0; +} + +/** + * is_hash_key - is a key vulnerable to hash collisions. + * @c: UBIFS file-system description object + * @key: key + * + * This function returns %1 if @key is a hashed key or %0 otherwise. + */ +static inline int is_hash_key(const struct ubifs_info *c, + const union ubifs_key *key) +{ + int type = key_type(c, key); + + return type == UBIFS_DENT_KEY || type == UBIFS_XENT_KEY; +} + +/** + * key_max_inode_size - get maximum file size allowed by current key format. + * @c: UBIFS file-system description object + */ +static inline unsigned long long key_max_inode_size(const struct ubifs_info *c) +{ + switch (c->key_fmt) { + case UBIFS_SIMPLE_KEY_FMT: + return (1ULL << UBIFS_S_KEY_BLOCK_BITS) * UBIFS_BLOCK_SIZE; + default: + return 0; + } +} +#endif /* !__UBIFS_KEY_H__ */ diff --git a/fs/ubifs/log.c b/fs/ubifs/log.c new file mode 100644 index 000000000000..36857b9ed59e --- /dev/null +++ b/fs/ubifs/log.c @@ -0,0 +1,805 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* + * This file is a part of UBIFS journal implementation and contains various + * functions which manipulate the log. The log is a fixed area on the flash + * which does not contain any data but refers to buds. The log is a part of the + * journal. + */ + +#include "ubifs.h" + +#ifdef CONFIG_UBIFS_FS_DEBUG +static int dbg_check_bud_bytes(struct ubifs_info *c); +#else +#define dbg_check_bud_bytes(c) 0 +#endif + +/** + * ubifs_search_bud - search bud LEB. + * @c: UBIFS file-system description object + * @lnum: logical eraseblock number to search + * + * This function searches bud LEB @lnum. Returns bud description object in case + * of success and %NULL if there is no bud with this LEB number. + */ +struct ubifs_bud *ubifs_search_bud(struct ubifs_info *c, int lnum) +{ + struct rb_node *p; + struct ubifs_bud *bud; + + spin_lock(&c->buds_lock); + p = c->buds.rb_node; + while (p) { + bud = rb_entry(p, struct ubifs_bud, rb); + if (lnum < bud->lnum) + p = p->rb_left; + else if (lnum > bud->lnum) + p = p->rb_right; + else { + spin_unlock(&c->buds_lock); + return bud; + } + } + spin_unlock(&c->buds_lock); + return NULL; +} + +/** + * ubifs_get_wbuf - get the wbuf associated with a LEB, if there is one. + * @c: UBIFS file-system description object + * @lnum: logical eraseblock number to search + * + * This functions returns the wbuf for @lnum or %NULL if there is not one. + */ +struct ubifs_wbuf *ubifs_get_wbuf(struct ubifs_info *c, int lnum) +{ + struct rb_node *p; + struct ubifs_bud *bud; + int jhead; + + if (!c->jheads) + return NULL; + + spin_lock(&c->buds_lock); + p = c->buds.rb_node; + while (p) { + bud = rb_entry(p, struct ubifs_bud, rb); + if (lnum < bud->lnum) + p = p->rb_left; + else if (lnum > bud->lnum) + p = p->rb_right; + else { + jhead = bud->jhead; + spin_unlock(&c->buds_lock); + return &c->jheads[jhead].wbuf; + } + } + spin_unlock(&c->buds_lock); + return NULL; +} + +/** + * next_log_lnum - switch to the next log LEB. + * @c: UBIFS file-system description object + * @lnum: current log LEB + */ +static inline int next_log_lnum(const struct ubifs_info *c, int lnum) +{ + lnum += 1; + if (lnum > c->log_last) + lnum = UBIFS_LOG_LNUM; + + return lnum; +} + +/** + * empty_log_bytes - calculate amount of empty space in the log. + * @c: UBIFS file-system description object + */ +static inline long long empty_log_bytes(const struct ubifs_info *c) +{ + long long h, t; + + h = (long long)c->lhead_lnum * c->leb_size + c->lhead_offs; + t = (long long)c->ltail_lnum * c->leb_size; + + if (h >= t) + return c->log_bytes - h + t; + else + return t - h; +} + +/** + * ubifs_add_bud - add bud LEB to the tree of buds and its journal head list. + * @c: UBIFS file-system description object + * @bud: the bud to add + */ +void ubifs_add_bud(struct ubifs_info *c, struct ubifs_bud *bud) +{ + struct rb_node **p, *parent = NULL; + struct ubifs_bud *b; + struct ubifs_jhead *jhead; + + spin_lock(&c->buds_lock); + p = &c->buds.rb_node; + while (*p) { + parent = *p; + b = rb_entry(parent, struct ubifs_bud, rb); + ubifs_assert(bud->lnum != b->lnum); + if (bud->lnum < b->lnum) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + rb_link_node(&bud->rb, parent, p); + rb_insert_color(&bud->rb, &c->buds); + if (c->jheads) { + jhead = &c->jheads[bud->jhead]; + list_add_tail(&bud->list, &jhead->buds_list); + } else + ubifs_assert(c->replaying && (c->vfs_sb->s_flags & MS_RDONLY)); + + /* + * Note, although this is a new bud, we anyway account this space now, + * before any data has been written to it, because this is about to + * guarantee fixed mount time, and this bud will anyway be read and + * scanned. + */ + c->bud_bytes += c->leb_size - bud->start; + + dbg_log("LEB %d:%d, jhead %d, bud_bytes %lld", bud->lnum, + bud->start, bud->jhead, c->bud_bytes); + spin_unlock(&c->buds_lock); +} + +/** + * ubifs_create_buds_lists - create journal head buds lists for remount rw. + * @c: UBIFS file-system description object + */ +void ubifs_create_buds_lists(struct ubifs_info *c) +{ + struct rb_node *p; + + spin_lock(&c->buds_lock); + p = rb_first(&c->buds); + while (p) { + struct ubifs_bud *bud = rb_entry(p, struct ubifs_bud, rb); + struct ubifs_jhead *jhead = &c->jheads[bud->jhead]; + + list_add_tail(&bud->list, &jhead->buds_list); + p = rb_next(p); + } + spin_unlock(&c->buds_lock); +} + +/** + * ubifs_add_bud_to_log - add a new bud to the log. + * @c: UBIFS file-system description object + * @jhead: journal head the bud belongs to + * @lnum: LEB number of the bud + * @offs: starting offset of the bud + * + * This function writes reference node for the new bud LEB @lnum it to the log, + * and adds it to the buds tress. It also makes sure that log size does not + * exceed the 'c->max_bud_bytes' limit. Returns zero in case of success, + * %-EAGAIN if commit is required, and a negative error codes in case of + * failure. + */ +int ubifs_add_bud_to_log(struct ubifs_info *c, int jhead, int lnum, int offs) +{ + int err; + struct ubifs_bud *bud; + struct ubifs_ref_node *ref; + + bud = kmalloc(sizeof(struct ubifs_bud), GFP_NOFS); + if (!bud) + return -ENOMEM; + ref = kzalloc(c->ref_node_alsz, GFP_NOFS); + if (!ref) { + kfree(bud); + return -ENOMEM; + } + + mutex_lock(&c->log_mutex); + + if (c->ro_media) { + err = -EROFS; + goto out_unlock; + } + + /* Make sure we have enough space in the log */ + if (empty_log_bytes(c) - c->ref_node_alsz < c->min_log_bytes) { + dbg_log("not enough log space - %lld, required %d", + empty_log_bytes(c), c->min_log_bytes); + ubifs_commit_required(c); + err = -EAGAIN; + goto out_unlock; + } + + /* + * Make sure the the amount of space in buds will not exceed + * 'c->max_bud_bytes' limit, because we want to guarantee mount time + * limits. + * + * It is not necessary to hold @c->buds_lock when reading @c->bud_bytes + * because we are holding @c->log_mutex. All @c->bud_bytes take place + * when both @c->log_mutex and @c->bud_bytes are locked. + */ + if (c->bud_bytes + c->leb_size - offs > c->max_bud_bytes) { + dbg_log("bud bytes %lld (%lld max), require commit", + c->bud_bytes, c->max_bud_bytes); + ubifs_commit_required(c); + err = -EAGAIN; + goto out_unlock; + } + + /* + * If the journal is full enough - start background commit. Note, it is + * OK to read 'c->cmt_state' without spinlock because integer reads + * are atomic in the kernel. + */ + if (c->bud_bytes >= c->bg_bud_bytes && + c->cmt_state == COMMIT_RESTING) { + dbg_log("bud bytes %lld (%lld max), initiate BG commit", + c->bud_bytes, c->max_bud_bytes); + ubifs_request_bg_commit(c); + } + + bud->lnum = lnum; + bud->start = offs; + bud->jhead = jhead; + + ref->ch.node_type = UBIFS_REF_NODE; + ref->lnum = cpu_to_le32(bud->lnum); + ref->offs = cpu_to_le32(bud->start); + ref->jhead = cpu_to_le32(jhead); + + if (c->lhead_offs > c->leb_size - c->ref_node_alsz) { + c->lhead_lnum = next_log_lnum(c, c->lhead_lnum); + c->lhead_offs = 0; + } + + if (c->lhead_offs == 0) { + /* Must ensure next log LEB has been unmapped */ + err = ubifs_leb_unmap(c, c->lhead_lnum); + if (err) + goto out_unlock; + } + + if (bud->start == 0) { + /* + * Before writing the LEB reference which refers an empty LEB + * to the log, we have to make sure it is mapped, because + * otherwise we'd risk to refer an LEB with garbage in case of + * an unclean reboot, because the target LEB might have been + * unmapped, but not yet physically erased. + */ + err = ubi_leb_map(c->ubi, bud->lnum, UBI_SHORTTERM); + if (err) + goto out_unlock; + } + + dbg_log("write ref LEB %d:%d", + c->lhead_lnum, c->lhead_offs); + err = ubifs_write_node(c, ref, UBIFS_REF_NODE_SZ, c->lhead_lnum, + c->lhead_offs, UBI_SHORTTERM); + if (err) + goto out_unlock; + + c->lhead_offs += c->ref_node_alsz; + + ubifs_add_bud(c, bud); + + mutex_unlock(&c->log_mutex); + kfree(ref); + return 0; + +out_unlock: + mutex_unlock(&c->log_mutex); + kfree(ref); + kfree(bud); + return err; +} + +/** + * remove_buds - remove used buds. + * @c: UBIFS file-system description object + * + * This function removes use buds from the buds tree. It does not remove the + * buds which are pointed to by journal heads. + */ +static void remove_buds(struct ubifs_info *c) +{ + struct rb_node *p; + + ubifs_assert(list_empty(&c->old_buds)); + c->cmt_bud_bytes = 0; + spin_lock(&c->buds_lock); + p = rb_first(&c->buds); + while (p) { + struct rb_node *p1 = p; + struct ubifs_bud *bud; + struct ubifs_wbuf *wbuf; + + p = rb_next(p); + bud = rb_entry(p1, struct ubifs_bud, rb); + wbuf = &c->jheads[bud->jhead].wbuf; + + if (wbuf->lnum == bud->lnum) { + /* + * Do not remove buds which are pointed to by journal + * heads (non-closed buds). + */ + c->cmt_bud_bytes += wbuf->offs - bud->start; + dbg_log("preserve %d:%d, jhead %d, bud bytes %d, " + "cmt_bud_bytes %lld", bud->lnum, bud->start, + bud->jhead, wbuf->offs - bud->start, + c->cmt_bud_bytes); + bud->start = wbuf->offs; + } else { + c->cmt_bud_bytes += c->leb_size - bud->start; + dbg_log("remove %d:%d, jhead %d, bud bytes %d, " + "cmt_bud_bytes %lld", bud->lnum, bud->start, + bud->jhead, c->leb_size - bud->start, + c->cmt_bud_bytes); + rb_erase(p1, &c->buds); + list_del(&bud->list); + /* + * If the commit does not finish, the recovery will need + * to replay the journal, in which case the old buds + * must be unchanged. Do not release them until post + * commit i.e. do not allow them to be garbage + * collected. + */ + list_add(&bud->list, &c->old_buds); + } + } + spin_unlock(&c->buds_lock); +} + +/** + * ubifs_log_start_commit - start commit. + * @c: UBIFS file-system description object + * @ltail_lnum: return new log tail LEB number + * + * The commit operation starts with writing "commit start" node to the log and + * reference nodes for all journal heads which will define new journal after + * the commit has been finished. The commit start and reference nodes are + * written in one go to the nearest empty log LEB (hence, when commit is + * finished UBIFS may safely unmap all the previous log LEBs). This function + * returns zero in case of success and a negative error code in case of + * failure. + */ +int ubifs_log_start_commit(struct ubifs_info *c, int *ltail_lnum) +{ + void *buf; + struct ubifs_cs_node *cs; + struct ubifs_ref_node *ref; + int err, i, max_len, len; + + err = dbg_check_bud_bytes(c); + if (err) + return err; + + max_len = UBIFS_CS_NODE_SZ + c->jhead_cnt * UBIFS_REF_NODE_SZ; + max_len = ALIGN(max_len, c->min_io_size); + buf = cs = kmalloc(max_len, GFP_NOFS); + if (!buf) + return -ENOMEM; + + cs->ch.node_type = UBIFS_CS_NODE; + cs->cmt_no = cpu_to_le64(c->cmt_no + 1); + ubifs_prepare_node(c, cs, UBIFS_CS_NODE_SZ, 0); + + /* + * Note, we do not lock 'c->log_mutex' because this is the commit start + * phase and we are exclusively using the log. And we do not lock + * write-buffer because nobody can write to the file-system at this + * phase. + */ + + len = UBIFS_CS_NODE_SZ; + for (i = 0; i < c->jhead_cnt; i++) { + int lnum = c->jheads[i].wbuf.lnum; + int offs = c->jheads[i].wbuf.offs; + + if (lnum == -1 || offs == c->leb_size) + continue; + + dbg_log("add ref to LEB %d:%d for jhead %d", lnum, offs, i); + ref = buf + len; + ref->ch.node_type = UBIFS_REF_NODE; + ref->lnum = cpu_to_le32(lnum); + ref->offs = cpu_to_le32(offs); + ref->jhead = cpu_to_le32(i); + + ubifs_prepare_node(c, ref, UBIFS_REF_NODE_SZ, 0); + len += UBIFS_REF_NODE_SZ; + } + + ubifs_pad(c, buf + len, ALIGN(len, c->min_io_size) - len); + + /* Switch to the next log LEB */ + if (c->lhead_offs) { + c->lhead_lnum = next_log_lnum(c, c->lhead_lnum); + c->lhead_offs = 0; + } + + if (c->lhead_offs == 0) { + /* Must ensure next LEB has been unmapped */ + err = ubifs_leb_unmap(c, c->lhead_lnum); + if (err) + goto out; + } + + len = ALIGN(len, c->min_io_size); + dbg_log("writing commit start at LEB %d:0, len %d", c->lhead_lnum, len); + err = ubifs_leb_write(c, c->lhead_lnum, cs, 0, len, UBI_SHORTTERM); + if (err) + goto out; + + *ltail_lnum = c->lhead_lnum; + + c->lhead_offs += len; + if (c->lhead_offs == c->leb_size) { + c->lhead_lnum = next_log_lnum(c, c->lhead_lnum); + c->lhead_offs = 0; + } + + remove_buds(c); + + /* + * We have started the commit and now users may use the rest of the log + * for new writes. + */ + c->min_log_bytes = 0; + +out: + kfree(buf); + return err; +} + +/** + * ubifs_log_end_commit - end commit. + * @c: UBIFS file-system description object + * @ltail_lnum: new log tail LEB number + * + * This function is called on when the commit operation was finished. It + * moves log tail to new position and unmaps LEBs which contain obsolete data. + * Returns zero in case of success and a negative error code in case of + * failure. + */ +int ubifs_log_end_commit(struct ubifs_info *c, int ltail_lnum) +{ + int err; + + /* + * At this phase we have to lock 'c->log_mutex' because UBIFS allows FS + * writes during commit. Its only short "commit" start phase when + * writers are blocked. + */ + mutex_lock(&c->log_mutex); + + dbg_log("old tail was LEB %d:0, new tail is LEB %d:0", + c->ltail_lnum, ltail_lnum); + + c->ltail_lnum = ltail_lnum; + /* + * The commit is finished and from now on it must be guaranteed that + * there is always enough space for the next commit. + */ + c->min_log_bytes = c->leb_size; + + spin_lock(&c->buds_lock); + c->bud_bytes -= c->cmt_bud_bytes; + spin_unlock(&c->buds_lock); + + err = dbg_check_bud_bytes(c); + + mutex_unlock(&c->log_mutex); + return err; +} + +/** + * ubifs_log_post_commit - things to do after commit is completed. + * @c: UBIFS file-system description object + * @old_ltail_lnum: old log tail LEB number + * + * Release buds only after commit is completed, because they must be unchanged + * if recovery is needed. + * + * Unmap log LEBs only after commit is completed, because they may be needed for + * recovery. + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_log_post_commit(struct ubifs_info *c, int old_ltail_lnum) +{ + int lnum, err = 0; + + while (!list_empty(&c->old_buds)) { + struct ubifs_bud *bud; + + bud = list_entry(c->old_buds.next, struct ubifs_bud, list); + err = ubifs_return_leb(c, bud->lnum); + if (err) + return err; + list_del(&bud->list); + kfree(bud); + } + mutex_lock(&c->log_mutex); + for (lnum = old_ltail_lnum; lnum != c->ltail_lnum; + lnum = next_log_lnum(c, lnum)) { + dbg_log("unmap log LEB %d", lnum); + err = ubifs_leb_unmap(c, lnum); + if (err) + goto out; + } +out: + mutex_unlock(&c->log_mutex); + return err; +} + +/** + * struct done_ref - references that have been done. + * @rb: rb-tree node + * @lnum: LEB number + */ +struct done_ref { + struct rb_node rb; + int lnum; +}; + +/** + * done_already - determine if a reference has been done already. + * @done_tree: rb-tree to store references that have been done + * @lnum: LEB number of reference + * + * This function returns %1 if the reference has been done, %0 if not, otherwise + * a negative error code is returned. + */ +static int done_already(struct rb_root *done_tree, int lnum) +{ + struct rb_node **p = &done_tree->rb_node, *parent = NULL; + struct done_ref *dr; + + while (*p) { + parent = *p; + dr = rb_entry(parent, struct done_ref, rb); + if (lnum < dr->lnum) + p = &(*p)->rb_left; + else if (lnum > dr->lnum) + p = &(*p)->rb_right; + else + return 1; + } + + dr = kzalloc(sizeof(struct done_ref), GFP_NOFS); + if (!dr) + return -ENOMEM; + + dr->lnum = lnum; + + rb_link_node(&dr->rb, parent, p); + rb_insert_color(&dr->rb, done_tree); + + return 0; +} + +/** + * destroy_done_tree - destroy the done tree. + * @done_tree: done tree to destroy + */ +static void destroy_done_tree(struct rb_root *done_tree) +{ + struct rb_node *this = done_tree->rb_node; + struct done_ref *dr; + + while (this) { + if (this->rb_left) { + this = this->rb_left; + continue; + } else if (this->rb_right) { + this = this->rb_right; + continue; + } + dr = rb_entry(this, struct done_ref, rb); + this = rb_parent(this); + if (this) { + if (this->rb_left == &dr->rb) + this->rb_left = NULL; + else + this->rb_right = NULL; + } + kfree(dr); + } +} + +/** + * add_node - add a node to the consolidated log. + * @c: UBIFS file-system description object + * @buf: buffer to which to add + * @lnum: LEB number to which to write is passed and returned here + * @offs: offset to where to write is passed and returned here + * @node: node to add + * + * This function returns %0 on success and a negative error code on failure. + */ +static int add_node(struct ubifs_info *c, void *buf, int *lnum, int *offs, + void *node) +{ + struct ubifs_ch *ch = node; + int len = le32_to_cpu(ch->len), remains = c->leb_size - *offs; + + if (len > remains) { + int sz = ALIGN(*offs, c->min_io_size), err; + + ubifs_pad(c, buf + *offs, sz - *offs); + err = ubifs_leb_change(c, *lnum, buf, sz, UBI_SHORTTERM); + if (err) + return err; + *lnum = next_log_lnum(c, *lnum); + *offs = 0; + } + memcpy(buf + *offs, node, len); + *offs += ALIGN(len, 8); + return 0; +} + +/** + * ubifs_consolidate_log - consolidate the log. + * @c: UBIFS file-system description object + * + * Repeated failed commits could cause the log to be full, but at least 1 LEB is + * needed for commit. This function rewrites the reference nodes in the log + * omitting duplicates, and failed CS nodes, and leaving no gaps. + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_consolidate_log(struct ubifs_info *c) +{ + struct ubifs_scan_leb *sleb; + struct ubifs_scan_node *snod; + struct rb_root done_tree = RB_ROOT; + int lnum, err, first = 1, write_lnum, offs = 0; + void *buf; + + dbg_rcvry("log tail LEB %d, log head LEB %d", c->ltail_lnum, + c->lhead_lnum); + buf = vmalloc(c->leb_size); + if (!buf) + return -ENOMEM; + lnum = c->ltail_lnum; + write_lnum = lnum; + while (1) { + sleb = ubifs_scan(c, lnum, 0, c->sbuf); + if (IS_ERR(sleb)) { + err = PTR_ERR(sleb); + goto out_free; + } + list_for_each_entry(snod, &sleb->nodes, list) { + switch (snod->type) { + case UBIFS_REF_NODE: { + struct ubifs_ref_node *ref = snod->node; + int ref_lnum = le32_to_cpu(ref->lnum); + + err = done_already(&done_tree, ref_lnum); + if (err < 0) + goto out_scan; + if (err != 1) { + err = add_node(c, buf, &write_lnum, + &offs, snod->node); + if (err) + goto out_scan; + } + break; + } + case UBIFS_CS_NODE: + if (!first) + break; + err = add_node(c, buf, &write_lnum, &offs, + snod->node); + if (err) + goto out_scan; + first = 0; + break; + } + } + ubifs_scan_destroy(sleb); + if (lnum == c->lhead_lnum) + break; + lnum = next_log_lnum(c, lnum); + } + if (offs) { + int sz = ALIGN(offs, c->min_io_size); + + ubifs_pad(c, buf + offs, sz - offs); + err = ubifs_leb_change(c, write_lnum, buf, sz, UBI_SHORTTERM); + if (err) + goto out_free; + offs = ALIGN(offs, c->min_io_size); + } + destroy_done_tree(&done_tree); + vfree(buf); + if (write_lnum == c->lhead_lnum) { + ubifs_err("log is too full"); + return -EINVAL; + } + /* Unmap remaining LEBs */ + lnum = write_lnum; + do { + lnum = next_log_lnum(c, lnum); + err = ubifs_leb_unmap(c, lnum); + if (err) + return err; + } while (lnum != c->lhead_lnum); + c->lhead_lnum = write_lnum; + c->lhead_offs = offs; + dbg_rcvry("new log head at %d:%d", c->lhead_lnum, c->lhead_offs); + return 0; + +out_scan: + ubifs_scan_destroy(sleb); +out_free: + destroy_done_tree(&done_tree); + vfree(buf); + return err; +} + +#ifdef CONFIG_UBIFS_FS_DEBUG + +/** + * dbg_check_bud_bytes - make sure bud bytes calculation are all right. + * @c: UBIFS file-system description object + * + * This function makes sure the amount of flash space used by closed buds + * ('c->bud_bytes' is correct). Returns zero in case of success and %-EINVAL in + * case of failure. + */ +static int dbg_check_bud_bytes(struct ubifs_info *c) +{ + int i, err = 0; + struct ubifs_bud *bud; + long long bud_bytes = 0; + + if (!(ubifs_chk_flags & UBIFS_CHK_GEN)) + return 0; + + spin_lock(&c->buds_lock); + for (i = 0; i < c->jhead_cnt; i++) + list_for_each_entry(bud, &c->jheads[i].buds_list, list) + bud_bytes += c->leb_size - bud->start; + + if (c->bud_bytes != bud_bytes) { + ubifs_err("bad bud_bytes %lld, calculated %lld", + c->bud_bytes, bud_bytes); + err = -EINVAL; + } + spin_unlock(&c->buds_lock); + + return err; +} + +#endif /* CONFIG_UBIFS_FS_DEBUG */ diff --git a/fs/ubifs/lprops.c b/fs/ubifs/lprops.c new file mode 100644 index 000000000000..2ba93da71b65 --- /dev/null +++ b/fs/ubifs/lprops.c @@ -0,0 +1,1357 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Adrian Hunter + * Artem Bityutskiy (Битюцкий Артём) + */ + +/* + * This file implements the functions that access LEB properties and their + * categories. LEBs are categorized based on the needs of UBIFS, and the + * categories are stored as either heaps or lists to provide a fast way of + * finding a LEB in a particular category. For example, UBIFS may need to find + * an empty LEB for the journal, or a very dirty LEB for garbage collection. + */ + +#include "ubifs.h" + +/** + * get_heap_comp_val - get the LEB properties value for heap comparisons. + * @lprops: LEB properties + * @cat: LEB category + */ +static int get_heap_comp_val(struct ubifs_lprops *lprops, int cat) +{ + switch (cat) { + case LPROPS_FREE: + return lprops->free; + case LPROPS_DIRTY_IDX: + return lprops->free + lprops->dirty; + default: + return lprops->dirty; + } +} + +/** + * move_up_lpt_heap - move a new heap entry up as far as possible. + * @c: UBIFS file-system description object + * @heap: LEB category heap + * @lprops: LEB properties to move + * @cat: LEB category + * + * New entries to a heap are added at the bottom and then moved up until the + * parent's value is greater. In the case of LPT's category heaps, the value + * is either the amount of free space or the amount of dirty space, depending + * on the category. + */ +static void move_up_lpt_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, + struct ubifs_lprops *lprops, int cat) +{ + int val1, val2, hpos; + + hpos = lprops->hpos; + if (!hpos) + return; /* Already top of the heap */ + val1 = get_heap_comp_val(lprops, cat); + /* Compare to parent and, if greater, move up the heap */ + do { + int ppos = (hpos - 1) / 2; + + val2 = get_heap_comp_val(heap->arr[ppos], cat); + if (val2 >= val1) + return; + /* Greater than parent so move up */ + heap->arr[ppos]->hpos = hpos; + heap->arr[hpos] = heap->arr[ppos]; + heap->arr[ppos] = lprops; + lprops->hpos = ppos; + hpos = ppos; + } while (hpos); +} + +/** + * adjust_lpt_heap - move a changed heap entry up or down the heap. + * @c: UBIFS file-system description object + * @heap: LEB category heap + * @lprops: LEB properties to move + * @hpos: heap position of @lprops + * @cat: LEB category + * + * Changed entries in a heap are moved up or down until the parent's value is + * greater. In the case of LPT's category heaps, the value is either the amount + * of free space or the amount of dirty space, depending on the category. + */ +static void adjust_lpt_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, + struct ubifs_lprops *lprops, int hpos, int cat) +{ + int val1, val2, val3, cpos; + + val1 = get_heap_comp_val(lprops, cat); + /* Compare to parent and, if greater than parent, move up the heap */ + if (hpos) { + int ppos = (hpos - 1) / 2; + + val2 = get_heap_comp_val(heap->arr[ppos], cat); + if (val1 > val2) { + /* Greater than parent so move up */ + while (1) { + heap->arr[ppos]->hpos = hpos; + heap->arr[hpos] = heap->arr[ppos]; + heap->arr[ppos] = lprops; + lprops->hpos = ppos; + hpos = ppos; + if (!hpos) + return; + ppos = (hpos - 1) / 2; + val2 = get_heap_comp_val(heap->arr[ppos], cat); + if (val1 <= val2) + return; + /* Still greater than parent so keep going */ + } + } + } + /* Not greater than parent, so compare to children */ + while (1) { + /* Compare to left child */ + cpos = hpos * 2 + 1; + if (cpos >= heap->cnt) + return; + val2 = get_heap_comp_val(heap->arr[cpos], cat); + if (val1 < val2) { + /* Less than left child, so promote biggest child */ + if (cpos + 1 < heap->cnt) { + val3 = get_heap_comp_val(heap->arr[cpos + 1], + cat); + if (val3 > val2) + cpos += 1; /* Right child is bigger */ + } + heap->arr[cpos]->hpos = hpos; + heap->arr[hpos] = heap->arr[cpos]; + heap->arr[cpos] = lprops; + lprops->hpos = cpos; + hpos = cpos; + continue; + } + /* Compare to right child */ + cpos += 1; + if (cpos >= heap->cnt) + return; + val3 = get_heap_comp_val(heap->arr[cpos], cat); + if (val1 < val3) { + /* Less than right child, so promote right child */ + heap->arr[cpos]->hpos = hpos; + heap->arr[hpos] = heap->arr[cpos]; + heap->arr[cpos] = lprops; + lprops->hpos = cpos; + hpos = cpos; + continue; + } + return; + } +} + +/** + * add_to_lpt_heap - add LEB properties to a LEB category heap. + * @c: UBIFS file-system description object + * @lprops: LEB properties to add + * @cat: LEB category + * + * This function returns %1 if @lprops is added to the heap for LEB category + * @cat, otherwise %0 is returned because the heap is full. + */ +static int add_to_lpt_heap(struct ubifs_info *c, struct ubifs_lprops *lprops, + int cat) +{ + struct ubifs_lpt_heap *heap = &c->lpt_heap[cat - 1]; + + if (heap->cnt >= heap->max_cnt) { + const int b = LPT_HEAP_SZ / 2 - 1; + int cpos, val1, val2; + + /* Compare to some other LEB on the bottom of heap */ + /* Pick a position kind of randomly */ + cpos = (((size_t)lprops >> 4) & b) + b; + ubifs_assert(cpos >= b); + ubifs_assert(cpos < LPT_HEAP_SZ); + ubifs_assert(cpos < heap->cnt); + + val1 = get_heap_comp_val(lprops, cat); + val2 = get_heap_comp_val(heap->arr[cpos], cat); + if (val1 > val2) { + struct ubifs_lprops *lp; + + lp = heap->arr[cpos]; + lp->flags &= ~LPROPS_CAT_MASK; + lp->flags |= LPROPS_UNCAT; + list_add(&lp->list, &c->uncat_list); + lprops->hpos = cpos; + heap->arr[cpos] = lprops; + move_up_lpt_heap(c, heap, lprops, cat); + dbg_check_heap(c, heap, cat, lprops->hpos); + return 1; /* Added to heap */ + } + dbg_check_heap(c, heap, cat, -1); + return 0; /* Not added to heap */ + } else { + lprops->hpos = heap->cnt++; + heap->arr[lprops->hpos] = lprops; + move_up_lpt_heap(c, heap, lprops, cat); + dbg_check_heap(c, heap, cat, lprops->hpos); + return 1; /* Added to heap */ + } +} + +/** + * remove_from_lpt_heap - remove LEB properties from a LEB category heap. + * @c: UBIFS file-system description object + * @lprops: LEB properties to remove + * @cat: LEB category + */ +static void remove_from_lpt_heap(struct ubifs_info *c, + struct ubifs_lprops *lprops, int cat) +{ + struct ubifs_lpt_heap *heap; + int hpos = lprops->hpos; + + heap = &c->lpt_heap[cat - 1]; + ubifs_assert(hpos >= 0 && hpos < heap->cnt); + ubifs_assert(heap->arr[hpos] == lprops); + heap->cnt -= 1; + if (hpos < heap->cnt) { + heap->arr[hpos] = heap->arr[heap->cnt]; + heap->arr[hpos]->hpos = hpos; + adjust_lpt_heap(c, heap, heap->arr[hpos], hpos, cat); + } + dbg_check_heap(c, heap, cat, -1); +} + +/** + * lpt_heap_replace - replace lprops in a category heap. + * @c: UBIFS file-system description object + * @old_lprops: LEB properties to replace + * @new_lprops: LEB properties with which to replace + * @cat: LEB category + * + * During commit it is sometimes necessary to copy a pnode (see dirty_cow_pnode) + * and the lprops that the pnode contains. When that happens, references in + * the category heaps to those lprops must be updated to point to the new + * lprops. This function does that. + */ +static void lpt_heap_replace(struct ubifs_info *c, + struct ubifs_lprops *old_lprops, + struct ubifs_lprops *new_lprops, int cat) +{ + struct ubifs_lpt_heap *heap; + int hpos = new_lprops->hpos; + + heap = &c->lpt_heap[cat - 1]; + heap->arr[hpos] = new_lprops; +} + +/** + * ubifs_add_to_cat - add LEB properties to a category list or heap. + * @c: UBIFS file-system description object + * @lprops: LEB properties to add + * @cat: LEB category to which to add + * + * LEB properties are categorized to enable fast find operations. + */ +void ubifs_add_to_cat(struct ubifs_info *c, struct ubifs_lprops *lprops, + int cat) +{ + switch (cat) { + case LPROPS_DIRTY: + case LPROPS_DIRTY_IDX: + case LPROPS_FREE: + if (add_to_lpt_heap(c, lprops, cat)) + break; + /* No more room on heap so make it uncategorized */ + cat = LPROPS_UNCAT; + /* Fall through */ + case LPROPS_UNCAT: + list_add(&lprops->list, &c->uncat_list); + break; + case LPROPS_EMPTY: + list_add(&lprops->list, &c->empty_list); + break; + case LPROPS_FREEABLE: + list_add(&lprops->list, &c->freeable_list); + c->freeable_cnt += 1; + break; + case LPROPS_FRDI_IDX: + list_add(&lprops->list, &c->frdi_idx_list); + break; + default: + ubifs_assert(0); + } + lprops->flags &= ~LPROPS_CAT_MASK; + lprops->flags |= cat; +} + +/** + * ubifs_remove_from_cat - remove LEB properties from a category list or heap. + * @c: UBIFS file-system description object + * @lprops: LEB properties to remove + * @cat: LEB category from which to remove + * + * LEB properties are categorized to enable fast find operations. + */ +static void ubifs_remove_from_cat(struct ubifs_info *c, + struct ubifs_lprops *lprops, int cat) +{ + switch (cat) { + case LPROPS_DIRTY: + case LPROPS_DIRTY_IDX: + case LPROPS_FREE: + remove_from_lpt_heap(c, lprops, cat); + break; + case LPROPS_FREEABLE: + c->freeable_cnt -= 1; + ubifs_assert(c->freeable_cnt >= 0); + /* Fall through */ + case LPROPS_UNCAT: + case LPROPS_EMPTY: + case LPROPS_FRDI_IDX: + ubifs_assert(!list_empty(&lprops->list)); + list_del(&lprops->list); + break; + default: + ubifs_assert(0); + } +} + +/** + * ubifs_replace_cat - replace lprops in a category list or heap. + * @c: UBIFS file-system description object + * @old_lprops: LEB properties to replace + * @new_lprops: LEB properties with which to replace + * + * During commit it is sometimes necessary to copy a pnode (see dirty_cow_pnode) + * and the lprops that the pnode contains. When that happens, references in + * category lists and heaps must be replaced. This function does that. + */ +void ubifs_replace_cat(struct ubifs_info *c, struct ubifs_lprops *old_lprops, + struct ubifs_lprops *new_lprops) +{ + int cat; + + cat = new_lprops->flags & LPROPS_CAT_MASK; + switch (cat) { + case LPROPS_DIRTY: + case LPROPS_DIRTY_IDX: + case LPROPS_FREE: + lpt_heap_replace(c, old_lprops, new_lprops, cat); + break; + case LPROPS_UNCAT: + case LPROPS_EMPTY: + case LPROPS_FREEABLE: + case LPROPS_FRDI_IDX: + list_replace(&old_lprops->list, &new_lprops->list); + break; + default: + ubifs_assert(0); + } +} + +/** + * ubifs_ensure_cat - ensure LEB properties are categorized. + * @c: UBIFS file-system description object + * @lprops: LEB properties + * + * A LEB may have fallen off of the bottom of a heap, and ended up as + * uncategorized even though it has enough space for us now. If that is the case + * this function will put the LEB back onto a heap. + */ +void ubifs_ensure_cat(struct ubifs_info *c, struct ubifs_lprops *lprops) +{ + int cat = lprops->flags & LPROPS_CAT_MASK; + + if (cat != LPROPS_UNCAT) + return; + cat = ubifs_categorize_lprops(c, lprops); + if (cat == LPROPS_UNCAT) + return; + ubifs_remove_from_cat(c, lprops, LPROPS_UNCAT); + ubifs_add_to_cat(c, lprops, cat); +} + +/** + * ubifs_categorize_lprops - categorize LEB properties. + * @c: UBIFS file-system description object + * @lprops: LEB properties to categorize + * + * LEB properties are categorized to enable fast find operations. This function + * returns the LEB category to which the LEB properties belong. Note however + * that if the LEB category is stored as a heap and the heap is full, the + * LEB properties may have their category changed to %LPROPS_UNCAT. + */ +int ubifs_categorize_lprops(const struct ubifs_info *c, + const struct ubifs_lprops *lprops) +{ + if (lprops->flags & LPROPS_TAKEN) + return LPROPS_UNCAT; + + if (lprops->free == c->leb_size) { + ubifs_assert(!(lprops->flags & LPROPS_INDEX)); + return LPROPS_EMPTY; + } + + if (lprops->free + lprops->dirty == c->leb_size) { + if (lprops->flags & LPROPS_INDEX) + return LPROPS_FRDI_IDX; + else + return LPROPS_FREEABLE; + } + + if (lprops->flags & LPROPS_INDEX) { + if (lprops->dirty + lprops->free >= c->min_idx_node_sz) + return LPROPS_DIRTY_IDX; + } else { + if (lprops->dirty >= c->dead_wm && + lprops->dirty > lprops->free) + return LPROPS_DIRTY; + if (lprops->free > 0) + return LPROPS_FREE; + } + + return LPROPS_UNCAT; +} + +/** + * change_category - change LEB properties category. + * @c: UBIFS file-system description object + * @lprops: LEB properties to recategorize + * + * LEB properties are categorized to enable fast find operations. When the LEB + * properties change they must be recategorized. + */ +static void change_category(struct ubifs_info *c, struct ubifs_lprops *lprops) +{ + int old_cat = lprops->flags & LPROPS_CAT_MASK; + int new_cat = ubifs_categorize_lprops(c, lprops); + + if (old_cat == new_cat) { + struct ubifs_lpt_heap *heap = &c->lpt_heap[new_cat - 1]; + + /* lprops on a heap now must be moved up or down */ + if (new_cat < 1 || new_cat > LPROPS_HEAP_CNT) + return; /* Not on a heap */ + heap = &c->lpt_heap[new_cat - 1]; + adjust_lpt_heap(c, heap, lprops, lprops->hpos, new_cat); + } else { + ubifs_remove_from_cat(c, lprops, old_cat); + ubifs_add_to_cat(c, lprops, new_cat); + } +} + +/** + * ubifs_get_lprops - get reference to LEB properties. + * @c: the UBIFS file-system description object + * + * This function locks lprops. Lprops have to be unlocked by + * 'ubifs_release_lprops()'. + */ +void ubifs_get_lprops(struct ubifs_info *c) +{ + mutex_lock(&c->lp_mutex); +} + +/** + * calc_dark - calculate LEB dark space size. + * @c: the UBIFS file-system description object + * @spc: amount of free and dirty space in the LEB + * + * This function calculates amount of dark space in an LEB which has @spc bytes + * of free and dirty space. Returns the calculations result. + * + * Dark space is the space which is not always usable - it depends on which + * nodes are written in which order. E.g., if an LEB has only 512 free bytes, + * it is dark space, because it cannot fit a large data node. So UBIFS cannot + * count on this LEB and treat these 512 bytes as usable because it is not true + * if, for example, only big chunks of uncompressible data will be written to + * the FS. + */ +static int calc_dark(struct ubifs_info *c, int spc) +{ + ubifs_assert(!(spc & 7)); + + if (spc < c->dark_wm) + return spc; + + /* + * If we have slightly more space then the dark space watermark, we can + * anyway safely assume it we'll be able to write a node of the + * smallest size there. + */ + if (spc - c->dark_wm < MIN_WRITE_SZ) + return spc - MIN_WRITE_SZ; + + return c->dark_wm; +} + +/** + * is_lprops_dirty - determine if LEB properties are dirty. + * @c: the UBIFS file-system description object + * @lprops: LEB properties to test + */ +static int is_lprops_dirty(struct ubifs_info *c, struct ubifs_lprops *lprops) +{ + struct ubifs_pnode *pnode; + int pos; + + pos = (lprops->lnum - c->main_first) & (UBIFS_LPT_FANOUT - 1); + pnode = (struct ubifs_pnode *)container_of(lprops - pos, + struct ubifs_pnode, + lprops[0]); + return !test_bit(COW_ZNODE, &pnode->flags) && + test_bit(DIRTY_CNODE, &pnode->flags); +} + +/** + * ubifs_change_lp - change LEB properties. + * @c: the UBIFS file-system description object + * @lp: LEB properties to change + * @free: new free space amount + * @dirty: new dirty space amount + * @flags: new flags + * @idx_gc_cnt: change to the count of idx_gc list + * + * This function changes LEB properties. This function does not change a LEB + * property (@free, @dirty or @flag) if the value passed is %LPROPS_NC. + * + * This function returns a pointer to the updated LEB properties on success + * and a negative error code on failure. N.B. the LEB properties may have had to + * be copied (due to COW) and consequently the pointer returned may not be the + * same as the pointer passed. + */ +const struct ubifs_lprops *ubifs_change_lp(struct ubifs_info *c, + const struct ubifs_lprops *lp, + int free, int dirty, int flags, + int idx_gc_cnt) +{ + /* + * This is the only function that is allowed to change lprops, so we + * discard the const qualifier. + */ + struct ubifs_lprops *lprops = (struct ubifs_lprops *)lp; + + dbg_lp("LEB %d, free %d, dirty %d, flags %d", + lprops->lnum, free, dirty, flags); + + ubifs_assert(mutex_is_locked(&c->lp_mutex)); + ubifs_assert(c->lst.empty_lebs >= 0 && + c->lst.empty_lebs <= c->main_lebs); + ubifs_assert(c->freeable_cnt >= 0); + ubifs_assert(c->freeable_cnt <= c->main_lebs); + ubifs_assert(c->lst.taken_empty_lebs >= 0); + ubifs_assert(c->lst.taken_empty_lebs <= c->lst.empty_lebs); + ubifs_assert(!(c->lst.total_free & 7) && !(c->lst.total_dirty & 7)); + ubifs_assert(!(c->lst.total_dead & 7) && !(c->lst.total_dark & 7)); + ubifs_assert(!(c->lst.total_used & 7)); + ubifs_assert(free == LPROPS_NC || free >= 0); + ubifs_assert(dirty == LPROPS_NC || dirty >= 0); + + if (!is_lprops_dirty(c, lprops)) { + lprops = ubifs_lpt_lookup_dirty(c, lprops->lnum); + if (IS_ERR(lprops)) + return lprops; + } else + ubifs_assert(lprops == ubifs_lpt_lookup_dirty(c, lprops->lnum)); + + ubifs_assert(!(lprops->free & 7) && !(lprops->dirty & 7)); + + spin_lock(&c->space_lock); + + if ((lprops->flags & LPROPS_TAKEN) && lprops->free == c->leb_size) + c->lst.taken_empty_lebs -= 1; + + if (!(lprops->flags & LPROPS_INDEX)) { + int old_spc; + + old_spc = lprops->free + lprops->dirty; + if (old_spc < c->dead_wm) + c->lst.total_dead -= old_spc; + else + c->lst.total_dark -= calc_dark(c, old_spc); + + c->lst.total_used -= c->leb_size - old_spc; + } + + if (free != LPROPS_NC) { + free = ALIGN(free, 8); + c->lst.total_free += free - lprops->free; + + /* Increase or decrease empty LEBs counter if needed */ + if (free == c->leb_size) { + if (lprops->free != c->leb_size) + c->lst.empty_lebs += 1; + } else if (lprops->free == c->leb_size) + c->lst.empty_lebs -= 1; + lprops->free = free; + } + + if (dirty != LPROPS_NC) { + dirty = ALIGN(dirty, 8); + c->lst.total_dirty += dirty - lprops->dirty; + lprops->dirty = dirty; + } + + if (flags != LPROPS_NC) { + /* Take care about indexing LEBs counter if needed */ + if ((lprops->flags & LPROPS_INDEX)) { + if (!(flags & LPROPS_INDEX)) + c->lst.idx_lebs -= 1; + } else if (flags & LPROPS_INDEX) + c->lst.idx_lebs += 1; + lprops->flags = flags; + } + + if (!(lprops->flags & LPROPS_INDEX)) { + int new_spc; + + new_spc = lprops->free + lprops->dirty; + if (new_spc < c->dead_wm) + c->lst.total_dead += new_spc; + else + c->lst.total_dark += calc_dark(c, new_spc); + + c->lst.total_used += c->leb_size - new_spc; + } + + if ((lprops->flags & LPROPS_TAKEN) && lprops->free == c->leb_size) + c->lst.taken_empty_lebs += 1; + + change_category(c, lprops); + + c->idx_gc_cnt += idx_gc_cnt; + + spin_unlock(&c->space_lock); + + return lprops; +} + +/** + * ubifs_release_lprops - release lprops lock. + * @c: the UBIFS file-system description object + * + * This function has to be called after each 'ubifs_get_lprops()' call to + * unlock lprops. + */ +void ubifs_release_lprops(struct ubifs_info *c) +{ + ubifs_assert(mutex_is_locked(&c->lp_mutex)); + ubifs_assert(c->lst.empty_lebs >= 0 && + c->lst.empty_lebs <= c->main_lebs); + + mutex_unlock(&c->lp_mutex); +} + +/** + * ubifs_get_lp_stats - get lprops statistics. + * @c: UBIFS file-system description object + * @st: return statistics + */ +void ubifs_get_lp_stats(struct ubifs_info *c, struct ubifs_lp_stats *st) +{ + spin_lock(&c->space_lock); + memcpy(st, &c->lst, sizeof(struct ubifs_lp_stats)); + spin_unlock(&c->space_lock); +} + +/** + * ubifs_change_one_lp - change LEB properties. + * @c: the UBIFS file-system description object + * @lnum: LEB to change properties for + * @free: amount of free space + * @dirty: amount of dirty space + * @flags_set: flags to set + * @flags_clean: flags to clean + * @idx_gc_cnt: change to the count of idx_gc list + * + * This function changes properties of LEB @lnum. It is a helper wrapper over + * 'ubifs_change_lp()' which hides lprops get/release. The arguments are the + * same as in case of 'ubifs_change_lp()'. Returns zero in case of success and + * a negative error code in case of failure. + */ +int ubifs_change_one_lp(struct ubifs_info *c, int lnum, int free, int dirty, + int flags_set, int flags_clean, int idx_gc_cnt) +{ + int err = 0, flags; + const struct ubifs_lprops *lp; + + ubifs_get_lprops(c); + + lp = ubifs_lpt_lookup_dirty(c, lnum); + if (IS_ERR(lp)) { + err = PTR_ERR(lp); + goto out; + } + + flags = (lp->flags | flags_set) & ~flags_clean; + lp = ubifs_change_lp(c, lp, free, dirty, flags, idx_gc_cnt); + if (IS_ERR(lp)) + err = PTR_ERR(lp); + +out: + ubifs_release_lprops(c); + return err; +} + +/** + * ubifs_update_one_lp - update LEB properties. + * @c: the UBIFS file-system description object + * @lnum: LEB to change properties for + * @free: amount of free space + * @dirty: amount of dirty space to add + * @flags_set: flags to set + * @flags_clean: flags to clean + * + * This function is the same as 'ubifs_change_one_lp()' but @dirty is added to + * current dirty space, not substitutes it. + */ +int ubifs_update_one_lp(struct ubifs_info *c, int lnum, int free, int dirty, + int flags_set, int flags_clean) +{ + int err = 0, flags; + const struct ubifs_lprops *lp; + + ubifs_get_lprops(c); + + lp = ubifs_lpt_lookup_dirty(c, lnum); + if (IS_ERR(lp)) { + err = PTR_ERR(lp); + goto out; + } + + flags = (lp->flags | flags_set) & ~flags_clean; + lp = ubifs_change_lp(c, lp, free, lp->dirty + dirty, flags, 0); + if (IS_ERR(lp)) + err = PTR_ERR(lp); + +out: + ubifs_release_lprops(c); + return err; +} + +/** + * ubifs_read_one_lp - read LEB properties. + * @c: the UBIFS file-system description object + * @lnum: LEB to read properties for + * @lp: where to store read properties + * + * This helper function reads properties of a LEB @lnum and stores them in @lp. + * Returns zero in case of success and a negative error code in case of + * failure. + */ +int ubifs_read_one_lp(struct ubifs_info *c, int lnum, struct ubifs_lprops *lp) +{ + int err = 0; + const struct ubifs_lprops *lpp; + + ubifs_get_lprops(c); + + lpp = ubifs_lpt_lookup(c, lnum); + if (IS_ERR(lpp)) { + err = PTR_ERR(lpp); + goto out; + } + + memcpy(lp, lpp, sizeof(struct ubifs_lprops)); + +out: + ubifs_release_lprops(c); + return err; +} + +/** + * ubifs_fast_find_free - try to find a LEB with free space quickly. + * @c: the UBIFS file-system description object + * + * This function returns LEB properties for a LEB with free space or %NULL if + * the function is unable to find a LEB quickly. + */ +const struct ubifs_lprops *ubifs_fast_find_free(struct ubifs_info *c) +{ + struct ubifs_lprops *lprops; + struct ubifs_lpt_heap *heap; + + ubifs_assert(mutex_is_locked(&c->lp_mutex)); + + heap = &c->lpt_heap[LPROPS_FREE - 1]; + if (heap->cnt == 0) + return NULL; + + lprops = heap->arr[0]; + ubifs_assert(!(lprops->flags & LPROPS_TAKEN)); + ubifs_assert(!(lprops->flags & LPROPS_INDEX)); + return lprops; +} + +/** + * ubifs_fast_find_empty - try to find an empty LEB quickly. + * @c: the UBIFS file-system description object + * + * This function returns LEB properties for an empty LEB or %NULL if the + * function is unable to find an empty LEB quickly. + */ +const struct ubifs_lprops *ubifs_fast_find_empty(struct ubifs_info *c) +{ + struct ubifs_lprops *lprops; + + ubifs_assert(mutex_is_locked(&c->lp_mutex)); + + if (list_empty(&c->empty_list)) + return NULL; + + lprops = list_entry(c->empty_list.next, struct ubifs_lprops, list); + ubifs_assert(!(lprops->flags & LPROPS_TAKEN)); + ubifs_assert(!(lprops->flags & LPROPS_INDEX)); + ubifs_assert(lprops->free == c->leb_size); + return lprops; +} + +/** + * ubifs_fast_find_freeable - try to find a freeable LEB quickly. + * @c: the UBIFS file-system description object + * + * This function returns LEB properties for a freeable LEB or %NULL if the + * function is unable to find a freeable LEB quickly. + */ +const struct ubifs_lprops *ubifs_fast_find_freeable(struct ubifs_info *c) +{ + struct ubifs_lprops *lprops; + + ubifs_assert(mutex_is_locked(&c->lp_mutex)); + + if (list_empty(&c->freeable_list)) + return NULL; + + lprops = list_entry(c->freeable_list.next, struct ubifs_lprops, list); + ubifs_assert(!(lprops->flags & LPROPS_TAKEN)); + ubifs_assert(!(lprops->flags & LPROPS_INDEX)); + ubifs_assert(lprops->free + lprops->dirty == c->leb_size); + ubifs_assert(c->freeable_cnt > 0); + return lprops; +} + +/** + * ubifs_fast_find_frdi_idx - try to find a freeable index LEB quickly. + * @c: the UBIFS file-system description object + * + * This function returns LEB properties for a freeable index LEB or %NULL if the + * function is unable to find a freeable index LEB quickly. + */ +const struct ubifs_lprops *ubifs_fast_find_frdi_idx(struct ubifs_info *c) +{ + struct ubifs_lprops *lprops; + + ubifs_assert(mutex_is_locked(&c->lp_mutex)); + + if (list_empty(&c->frdi_idx_list)) + return NULL; + + lprops = list_entry(c->frdi_idx_list.next, struct ubifs_lprops, list); + ubifs_assert(!(lprops->flags & LPROPS_TAKEN)); + ubifs_assert((lprops->flags & LPROPS_INDEX)); + ubifs_assert(lprops->free + lprops->dirty == c->leb_size); + return lprops; +} + +#ifdef CONFIG_UBIFS_FS_DEBUG + +/** + * dbg_check_cats - check category heaps and lists. + * @c: UBIFS file-system description object + * + * This function returns %0 on success and a negative error code on failure. + */ +int dbg_check_cats(struct ubifs_info *c) +{ + struct ubifs_lprops *lprops; + struct list_head *pos; + int i, cat; + + if (!(ubifs_chk_flags & (UBIFS_CHK_GEN | UBIFS_CHK_LPROPS))) + return 0; + + list_for_each_entry(lprops, &c->empty_list, list) { + if (lprops->free != c->leb_size) { + ubifs_err("non-empty LEB %d on empty list " + "(free %d dirty %d flags %d)", lprops->lnum, + lprops->free, lprops->dirty, lprops->flags); + return -EINVAL; + } + if (lprops->flags & LPROPS_TAKEN) { + ubifs_err("taken LEB %d on empty list " + "(free %d dirty %d flags %d)", lprops->lnum, + lprops->free, lprops->dirty, lprops->flags); + return -EINVAL; + } + } + + i = 0; + list_for_each_entry(lprops, &c->freeable_list, list) { + if (lprops->free + lprops->dirty != c->leb_size) { + ubifs_err("non-freeable LEB %d on freeable list " + "(free %d dirty %d flags %d)", lprops->lnum, + lprops->free, lprops->dirty, lprops->flags); + return -EINVAL; + } + if (lprops->flags & LPROPS_TAKEN) { + ubifs_err("taken LEB %d on freeable list " + "(free %d dirty %d flags %d)", lprops->lnum, + lprops->free, lprops->dirty, lprops->flags); + return -EINVAL; + } + i += 1; + } + if (i != c->freeable_cnt) { + ubifs_err("freeable list count %d expected %d", i, + c->freeable_cnt); + return -EINVAL; + } + + i = 0; + list_for_each(pos, &c->idx_gc) + i += 1; + if (i != c->idx_gc_cnt) { + ubifs_err("idx_gc list count %d expected %d", i, + c->idx_gc_cnt); + return -EINVAL; + } + + list_for_each_entry(lprops, &c->frdi_idx_list, list) { + if (lprops->free + lprops->dirty != c->leb_size) { + ubifs_err("non-freeable LEB %d on frdi_idx list " + "(free %d dirty %d flags %d)", lprops->lnum, + lprops->free, lprops->dirty, lprops->flags); + return -EINVAL; + } + if (lprops->flags & LPROPS_TAKEN) { + ubifs_err("taken LEB %d on frdi_idx list " + "(free %d dirty %d flags %d)", lprops->lnum, + lprops->free, lprops->dirty, lprops->flags); + return -EINVAL; + } + if (!(lprops->flags & LPROPS_INDEX)) { + ubifs_err("non-index LEB %d on frdi_idx list " + "(free %d dirty %d flags %d)", lprops->lnum, + lprops->free, lprops->dirty, lprops->flags); + return -EINVAL; + } + } + + for (cat = 1; cat <= LPROPS_HEAP_CNT; cat++) { + struct ubifs_lpt_heap *heap = &c->lpt_heap[cat - 1]; + + for (i = 0; i < heap->cnt; i++) { + lprops = heap->arr[i]; + if (!lprops) { + ubifs_err("null ptr in LPT heap cat %d", cat); + return -EINVAL; + } + if (lprops->hpos != i) { + ubifs_err("bad ptr in LPT heap cat %d", cat); + return -EINVAL; + } + if (lprops->flags & LPROPS_TAKEN) { + ubifs_err("taken LEB in LPT heap cat %d", cat); + return -EINVAL; + } + } + } + + return 0; +} + +void dbg_check_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat, + int add_pos) +{ + int i = 0, j, err = 0; + + if (!(ubifs_chk_flags & (UBIFS_CHK_GEN | UBIFS_CHK_LPROPS))) + return; + + for (i = 0; i < heap->cnt; i++) { + struct ubifs_lprops *lprops = heap->arr[i]; + struct ubifs_lprops *lp; + + if (i != add_pos) + if ((lprops->flags & LPROPS_CAT_MASK) != cat) { + err = 1; + goto out; + } + if (lprops->hpos != i) { + err = 2; + goto out; + } + lp = ubifs_lpt_lookup(c, lprops->lnum); + if (IS_ERR(lp)) { + err = 3; + goto out; + } + if (lprops != lp) { + dbg_msg("lprops %zx lp %zx lprops->lnum %d lp->lnum %d", + (size_t)lprops, (size_t)lp, lprops->lnum, + lp->lnum); + err = 4; + goto out; + } + for (j = 0; j < i; j++) { + lp = heap->arr[j]; + if (lp == lprops) { + err = 5; + goto out; + } + if (lp->lnum == lprops->lnum) { + err = 6; + goto out; + } + } + } +out: + if (err) { + dbg_msg("failed cat %d hpos %d err %d", cat, i, err); + dbg_dump_stack(); + dbg_dump_heap(c, heap, cat); + } +} + +/** + * struct scan_check_data - data provided to scan callback function. + * @lst: LEB properties statistics + * @err: error code + */ +struct scan_check_data { + struct ubifs_lp_stats lst; + int err; +}; + +/** + * scan_check_cb - scan callback. + * @c: the UBIFS file-system description object + * @lp: LEB properties to scan + * @in_tree: whether the LEB properties are in main memory + * @data: information passed to and from the caller of the scan + * + * This function returns a code that indicates whether the scan should continue + * (%LPT_SCAN_CONTINUE), whether the LEB properties should be added to the tree + * in main memory (%LPT_SCAN_ADD), or whether the scan should stop + * (%LPT_SCAN_STOP). + */ +static int scan_check_cb(struct ubifs_info *c, + const struct ubifs_lprops *lp, int in_tree, + struct scan_check_data *data) +{ + struct ubifs_scan_leb *sleb; + struct ubifs_scan_node *snod; + struct ubifs_lp_stats *lst = &data->lst; + int cat, lnum = lp->lnum, is_idx = 0, used = 0, free, dirty; + + cat = lp->flags & LPROPS_CAT_MASK; + if (cat != LPROPS_UNCAT) { + cat = ubifs_categorize_lprops(c, lp); + if (cat != (lp->flags & LPROPS_CAT_MASK)) { + ubifs_err("bad LEB category %d expected %d", + (lp->flags & LPROPS_CAT_MASK), cat); + goto out; + } + } + + /* Check lp is on its category list (if it has one) */ + if (in_tree) { + struct list_head *list = NULL; + + switch (cat) { + case LPROPS_EMPTY: + list = &c->empty_list; + break; + case LPROPS_FREEABLE: + list = &c->freeable_list; + break; + case LPROPS_FRDI_IDX: + list = &c->frdi_idx_list; + break; + case LPROPS_UNCAT: + list = &c->uncat_list; + break; + } + if (list) { + struct ubifs_lprops *lprops; + int found = 0; + + list_for_each_entry(lprops, list, list) { + if (lprops == lp) { + found = 1; + break; + } + } + if (!found) { + ubifs_err("bad LPT list (category %d)", cat); + goto out; + } + } + } + + /* Check lp is on its category heap (if it has one) */ + if (in_tree && cat > 0 && cat <= LPROPS_HEAP_CNT) { + struct ubifs_lpt_heap *heap = &c->lpt_heap[cat - 1]; + + if ((lp->hpos != -1 && heap->arr[lp->hpos]->lnum != lnum) || + lp != heap->arr[lp->hpos]) { + ubifs_err("bad LPT heap (category %d)", cat); + goto out; + } + } + + sleb = ubifs_scan(c, lnum, 0, c->dbg_buf); + if (IS_ERR(sleb)) { + /* + * After an unclean unmount, empty and freeable LEBs + * may contain garbage. + */ + if (lp->free == c->leb_size) { + ubifs_err("scan errors were in empty LEB " + "- continuing checking"); + lst->empty_lebs += 1; + lst->total_free += c->leb_size; + lst->total_dark += calc_dark(c, c->leb_size); + return LPT_SCAN_CONTINUE; + } + + if (lp->free + lp->dirty == c->leb_size && + !(lp->flags & LPROPS_INDEX)) { + ubifs_err("scan errors were in freeable LEB " + "- continuing checking"); + lst->total_free += lp->free; + lst->total_dirty += lp->dirty; + lst->total_dark += calc_dark(c, c->leb_size); + return LPT_SCAN_CONTINUE; + } + data->err = PTR_ERR(sleb); + return LPT_SCAN_STOP; + } + + is_idx = -1; + list_for_each_entry(snod, &sleb->nodes, list) { + int found, level = 0; + + cond_resched(); + + if (is_idx == -1) + is_idx = (snod->type == UBIFS_IDX_NODE) ? 1 : 0; + + if (is_idx && snod->type != UBIFS_IDX_NODE) { + ubifs_err("indexing node in data LEB %d:%d", + lnum, snod->offs); + goto out_destroy; + } + + if (snod->type == UBIFS_IDX_NODE) { + struct ubifs_idx_node *idx = snod->node; + + key_read(c, ubifs_idx_key(c, idx), &snod->key); + level = le16_to_cpu(idx->level); + } + + found = ubifs_tnc_has_node(c, &snod->key, level, lnum, + snod->offs, is_idx); + if (found) { + if (found < 0) + goto out_destroy; + used += ALIGN(snod->len, 8); + } + } + + free = c->leb_size - sleb->endpt; + dirty = sleb->endpt - used; + + if (free > c->leb_size || free < 0 || dirty > c->leb_size || + dirty < 0) { + ubifs_err("bad calculated accounting for LEB %d: " + "free %d, dirty %d", lnum, free, dirty); + goto out_destroy; + } + + if (lp->free + lp->dirty == c->leb_size && + free + dirty == c->leb_size) + if ((is_idx && !(lp->flags & LPROPS_INDEX)) || + (!is_idx && free == c->leb_size) || + lp->free == c->leb_size) { + /* + * Empty or freeable LEBs could contain index + * nodes from an uncompleted commit due to an + * unclean unmount. Or they could be empty for + * the same reason. Or it may simply not have been + * unmapped. + */ + free = lp->free; + dirty = lp->dirty; + is_idx = 0; + } + + if (is_idx && lp->free + lp->dirty == free + dirty && + lnum != c->ihead_lnum) { + /* + * After an unclean unmount, an index LEB could have a different + * amount of free space than the value recorded by lprops. That + * is because the in-the-gaps method may use free space or + * create free space (as a side-effect of using ubi_leb_change + * and not writing the whole LEB). The incorrect free space + * value is not a problem because the index is only ever + * allocated empty LEBs, so there will never be an attempt to + * write to the free space at the end of an index LEB - except + * by the in-the-gaps method for which it is not a problem. + */ + free = lp->free; + dirty = lp->dirty; + } + + if (lp->free != free || lp->dirty != dirty) + goto out_print; + + if (is_idx && !(lp->flags & LPROPS_INDEX)) { + if (free == c->leb_size) + /* Free but not unmapped LEB, it's fine */ + is_idx = 0; + else { + ubifs_err("indexing node without indexing " + "flag"); + goto out_print; + } + } + + if (!is_idx && (lp->flags & LPROPS_INDEX)) { + ubifs_err("data node with indexing flag"); + goto out_print; + } + + if (free == c->leb_size) + lst->empty_lebs += 1; + + if (is_idx) + lst->idx_lebs += 1; + + if (!(lp->flags & LPROPS_INDEX)) + lst->total_used += c->leb_size - free - dirty; + lst->total_free += free; + lst->total_dirty += dirty; + + if (!(lp->flags & LPROPS_INDEX)) { + int spc = free + dirty; + + if (spc < c->dead_wm) + lst->total_dead += spc; + else + lst->total_dark += calc_dark(c, spc); + } + + ubifs_scan_destroy(sleb); + + return LPT_SCAN_CONTINUE; + +out_print: + ubifs_err("bad accounting of LEB %d: free %d, dirty %d flags %#x, " + "should be free %d, dirty %d", + lnum, lp->free, lp->dirty, lp->flags, free, dirty); + dbg_dump_leb(c, lnum); +out_destroy: + ubifs_scan_destroy(sleb); +out: + data->err = -EINVAL; + return LPT_SCAN_STOP; +} + +/** + * dbg_check_lprops - check all LEB properties. + * @c: UBIFS file-system description object + * + * This function checks all LEB properties and makes sure they are all correct. + * It returns zero if everything is fine, %-EINVAL if there is an inconsistency + * and other negative error codes in case of other errors. This function is + * called while the file system is locked (because of commit start), so no + * additional locking is required. Note that locking the LPT mutex would cause + * a circular lock dependency with the TNC mutex. + */ +int dbg_check_lprops(struct ubifs_info *c) +{ + int i, err; + struct scan_check_data data; + struct ubifs_lp_stats *lst = &data.lst; + + if (!(ubifs_chk_flags & UBIFS_CHK_LPROPS)) + return 0; + + /* + * As we are going to scan the media, the write buffers have to be + * synchronized. + */ + for (i = 0; i < c->jhead_cnt; i++) { + err = ubifs_wbuf_sync(&c->jheads[i].wbuf); + if (err) + return err; + } + + memset(lst, 0, sizeof(struct ubifs_lp_stats)); + + data.err = 0; + err = ubifs_lpt_scan_nolock(c, c->main_first, c->leb_cnt - 1, + (ubifs_lpt_scan_callback)scan_check_cb, + &data); + if (err && err != -ENOSPC) + goto out; + if (data.err) { + err = data.err; + goto out; + } + + if (lst->empty_lebs != c->lst.empty_lebs || + lst->idx_lebs != c->lst.idx_lebs || + lst->total_free != c->lst.total_free || + lst->total_dirty != c->lst.total_dirty || + lst->total_used != c->lst.total_used) { + ubifs_err("bad overall accounting"); + ubifs_err("calculated: empty_lebs %d, idx_lebs %d, " + "total_free %lld, total_dirty %lld, total_used %lld", + lst->empty_lebs, lst->idx_lebs, lst->total_free, + lst->total_dirty, lst->total_used); + ubifs_err("read from lprops: empty_lebs %d, idx_lebs %d, " + "total_free %lld, total_dirty %lld, total_used %lld", + c->lst.empty_lebs, c->lst.idx_lebs, c->lst.total_free, + c->lst.total_dirty, c->lst.total_used); + err = -EINVAL; + goto out; + } + + if (lst->total_dead != c->lst.total_dead || + lst->total_dark != c->lst.total_dark) { + ubifs_err("bad dead/dark space accounting"); + ubifs_err("calculated: total_dead %lld, total_dark %lld", + lst->total_dead, lst->total_dark); + ubifs_err("read from lprops: total_dead %lld, total_dark %lld", + c->lst.total_dead, c->lst.total_dark); + err = -EINVAL; + goto out; + } + + err = dbg_check_cats(c); +out: + return err; +} + +#endif /* CONFIG_UBIFS_FS_DEBUG */ diff --git a/fs/ubifs/lpt.c b/fs/ubifs/lpt.c new file mode 100644 index 000000000000..9ff2463177e5 --- /dev/null +++ b/fs/ubifs/lpt.c @@ -0,0 +1,2243 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Adrian Hunter + * Artem Bityutskiy (Битюцкий Артём) + */ + +/* + * This file implements the LEB properties tree (LPT) area. The LPT area + * contains the LEB properties tree, a table of LPT area eraseblocks (ltab), and + * (for the "big" model) a table of saved LEB numbers (lsave). The LPT area sits + * between the log and the orphan area. + * + * The LPT area is like a miniature self-contained file system. It is required + * that it never runs out of space, is fast to access and update, and scales + * logarithmically. The LEB properties tree is implemented as a wandering tree + * much like the TNC, and the LPT area has its own garbage collection. + * + * The LPT has two slightly different forms called the "small model" and the + * "big model". The small model is used when the entire LEB properties table + * can be written into a single eraseblock. In that case, garbage collection + * consists of just writing the whole table, which therefore makes all other + * eraseblocks reusable. In the case of the big model, dirty eraseblocks are + * selected for garbage collection, which consists are marking the nodes in + * that LEB as dirty, and then only the dirty nodes are written out. Also, in + * the case of the big model, a table of LEB numbers is saved so that the entire + * LPT does not to be scanned looking for empty eraseblocks when UBIFS is first + * mounted. + */ + +#include +#include "ubifs.h" + +/** + * do_calc_lpt_geom - calculate sizes for the LPT area. + * @c: the UBIFS file-system description object + * + * Calculate the sizes of LPT bit fields, nodes, and tree, based on the + * properties of the flash and whether LPT is "big" (c->big_lpt). + */ +static void do_calc_lpt_geom(struct ubifs_info *c) +{ + int i, n, bits, per_leb_wastage, max_pnode_cnt; + long long sz, tot_wastage; + + n = c->main_lebs + c->max_leb_cnt - c->leb_cnt; + max_pnode_cnt = DIV_ROUND_UP(n, UBIFS_LPT_FANOUT); + + c->lpt_hght = 1; + n = UBIFS_LPT_FANOUT; + while (n < max_pnode_cnt) { + c->lpt_hght += 1; + n <<= UBIFS_LPT_FANOUT_SHIFT; + } + + c->pnode_cnt = DIV_ROUND_UP(c->main_lebs, UBIFS_LPT_FANOUT); + + n = DIV_ROUND_UP(c->pnode_cnt, UBIFS_LPT_FANOUT); + c->nnode_cnt = n; + for (i = 1; i < c->lpt_hght; i++) { + n = DIV_ROUND_UP(n, UBIFS_LPT_FANOUT); + c->nnode_cnt += n; + } + + c->space_bits = fls(c->leb_size) - 3; + c->lpt_lnum_bits = fls(c->lpt_lebs); + c->lpt_offs_bits = fls(c->leb_size - 1); + c->lpt_spc_bits = fls(c->leb_size); + + n = DIV_ROUND_UP(c->max_leb_cnt, UBIFS_LPT_FANOUT); + c->pcnt_bits = fls(n - 1); + + c->lnum_bits = fls(c->max_leb_cnt - 1); + + bits = UBIFS_LPT_CRC_BITS + UBIFS_LPT_TYPE_BITS + + (c->big_lpt ? c->pcnt_bits : 0) + + (c->space_bits * 2 + 1) * UBIFS_LPT_FANOUT; + c->pnode_sz = (bits + 7) / 8; + + bits = UBIFS_LPT_CRC_BITS + UBIFS_LPT_TYPE_BITS + + (c->big_lpt ? c->pcnt_bits : 0) + + (c->lpt_lnum_bits + c->lpt_offs_bits) * UBIFS_LPT_FANOUT; + c->nnode_sz = (bits + 7) / 8; + + bits = UBIFS_LPT_CRC_BITS + UBIFS_LPT_TYPE_BITS + + c->lpt_lebs * c->lpt_spc_bits * 2; + c->ltab_sz = (bits + 7) / 8; + + bits = UBIFS_LPT_CRC_BITS + UBIFS_LPT_TYPE_BITS + + c->lnum_bits * c->lsave_cnt; + c->lsave_sz = (bits + 7) / 8; + + /* Calculate the minimum LPT size */ + c->lpt_sz = (long long)c->pnode_cnt * c->pnode_sz; + c->lpt_sz += (long long)c->nnode_cnt * c->nnode_sz; + c->lpt_sz += c->ltab_sz; + c->lpt_sz += c->lsave_sz; + + /* Add wastage */ + sz = c->lpt_sz; + per_leb_wastage = max_t(int, c->pnode_sz, c->nnode_sz); + sz += per_leb_wastage; + tot_wastage = per_leb_wastage; + while (sz > c->leb_size) { + sz += per_leb_wastage; + sz -= c->leb_size; + tot_wastage += per_leb_wastage; + } + tot_wastage += ALIGN(sz, c->min_io_size) - sz; + c->lpt_sz += tot_wastage; +} + +/** + * ubifs_calc_lpt_geom - calculate and check sizes for the LPT area. + * @c: the UBIFS file-system description object + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_calc_lpt_geom(struct ubifs_info *c) +{ + int lebs_needed; + uint64_t sz; + + do_calc_lpt_geom(c); + + /* Verify that lpt_lebs is big enough */ + sz = c->lpt_sz * 2; /* Must have at least 2 times the size */ + sz += c->leb_size - 1; + do_div(sz, c->leb_size); + lebs_needed = sz; + if (lebs_needed > c->lpt_lebs) { + ubifs_err("too few LPT LEBs"); + return -EINVAL; + } + + /* Verify that ltab fits in a single LEB (since ltab is a single node */ + if (c->ltab_sz > c->leb_size) { + ubifs_err("LPT ltab too big"); + return -EINVAL; + } + + c->check_lpt_free = c->big_lpt; + + return 0; +} + +/** + * calc_dflt_lpt_geom - calculate default LPT geometry. + * @c: the UBIFS file-system description object + * @main_lebs: number of main area LEBs is passed and returned here + * @big_lpt: whether the LPT area is "big" is returned here + * + * The size of the LPT area depends on parameters that themselves are dependent + * on the size of the LPT area. This function, successively recalculates the LPT + * area geometry until the parameters and resultant geometry are consistent. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int calc_dflt_lpt_geom(struct ubifs_info *c, int *main_lebs, + int *big_lpt) +{ + int i, lebs_needed; + uint64_t sz; + + /* Start by assuming the minimum number of LPT LEBs */ + c->lpt_lebs = UBIFS_MIN_LPT_LEBS; + c->main_lebs = *main_lebs - c->lpt_lebs; + if (c->main_lebs <= 0) + return -EINVAL; + + /* And assume we will use the small LPT model */ + c->big_lpt = 0; + + /* + * Calculate the geometry based on assumptions above and then see if it + * makes sense + */ + do_calc_lpt_geom(c); + + /* Small LPT model must have lpt_sz < leb_size */ + if (c->lpt_sz > c->leb_size) { + /* Nope, so try again using big LPT model */ + c->big_lpt = 1; + do_calc_lpt_geom(c); + } + + /* Now check there are enough LPT LEBs */ + for (i = 0; i < 64 ; i++) { + sz = c->lpt_sz * 4; /* Allow 4 times the size */ + sz += c->leb_size - 1; + do_div(sz, c->leb_size); + lebs_needed = sz; + if (lebs_needed > c->lpt_lebs) { + /* Not enough LPT LEBs so try again with more */ + c->lpt_lebs = lebs_needed; + c->main_lebs = *main_lebs - c->lpt_lebs; + if (c->main_lebs <= 0) + return -EINVAL; + do_calc_lpt_geom(c); + continue; + } + if (c->ltab_sz > c->leb_size) { + ubifs_err("LPT ltab too big"); + return -EINVAL; + } + *main_lebs = c->main_lebs; + *big_lpt = c->big_lpt; + return 0; + } + return -EINVAL; +} + +/** + * pack_bits - pack bit fields end-to-end. + * @addr: address at which to pack (passed and next address returned) + * @pos: bit position at which to pack (passed and next position returned) + * @val: value to pack + * @nrbits: number of bits of value to pack (1-32) + */ +static void pack_bits(uint8_t **addr, int *pos, uint32_t val, int nrbits) +{ + uint8_t *p = *addr; + int b = *pos; + + ubifs_assert(nrbits > 0); + ubifs_assert(nrbits <= 32); + ubifs_assert(*pos >= 0); + ubifs_assert(*pos < 8); + ubifs_assert((val >> nrbits) == 0 || nrbits == 32); + if (b) { + *p |= ((uint8_t)val) << b; + nrbits += b; + if (nrbits > 8) { + *++p = (uint8_t)(val >>= (8 - b)); + if (nrbits > 16) { + *++p = (uint8_t)(val >>= 8); + if (nrbits > 24) { + *++p = (uint8_t)(val >>= 8); + if (nrbits > 32) + *++p = (uint8_t)(val >>= 8); + } + } + } + } else { + *p = (uint8_t)val; + if (nrbits > 8) { + *++p = (uint8_t)(val >>= 8); + if (nrbits > 16) { + *++p = (uint8_t)(val >>= 8); + if (nrbits > 24) + *++p = (uint8_t)(val >>= 8); + } + } + } + b = nrbits & 7; + if (b == 0) + p++; + *addr = p; + *pos = b; +} + +/** + * ubifs_unpack_bits - unpack bit fields. + * @addr: address at which to unpack (passed and next address returned) + * @pos: bit position at which to unpack (passed and next position returned) + * @nrbits: number of bits of value to unpack (1-32) + * + * This functions returns the value unpacked. + */ +uint32_t ubifs_unpack_bits(uint8_t **addr, int *pos, int nrbits) +{ + const int k = 32 - nrbits; + uint8_t *p = *addr; + int b = *pos; + uint32_t val; + + ubifs_assert(nrbits > 0); + ubifs_assert(nrbits <= 32); + ubifs_assert(*pos >= 0); + ubifs_assert(*pos < 8); + if (b) { + val = p[1] | ((uint32_t)p[2] << 8) | ((uint32_t)p[3] << 16) | + ((uint32_t)p[4] << 24); + val <<= (8 - b); + val |= *p >> b; + nrbits += b; + } else + val = p[0] | ((uint32_t)p[1] << 8) | ((uint32_t)p[2] << 16) | + ((uint32_t)p[3] << 24); + val <<= k; + val >>= k; + b = nrbits & 7; + p += nrbits / 8; + *addr = p; + *pos = b; + ubifs_assert((val >> nrbits) == 0 || nrbits - b == 32); + return val; +} + +/** + * ubifs_pack_pnode - pack all the bit fields of a pnode. + * @c: UBIFS file-system description object + * @buf: buffer into which to pack + * @pnode: pnode to pack + */ +void ubifs_pack_pnode(struct ubifs_info *c, void *buf, + struct ubifs_pnode *pnode) +{ + uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES; + int i, pos = 0; + uint16_t crc; + + pack_bits(&addr, &pos, UBIFS_LPT_PNODE, UBIFS_LPT_TYPE_BITS); + if (c->big_lpt) + pack_bits(&addr, &pos, pnode->num, c->pcnt_bits); + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + pack_bits(&addr, &pos, pnode->lprops[i].free >> 3, + c->space_bits); + pack_bits(&addr, &pos, pnode->lprops[i].dirty >> 3, + c->space_bits); + if (pnode->lprops[i].flags & LPROPS_INDEX) + pack_bits(&addr, &pos, 1, 1); + else + pack_bits(&addr, &pos, 0, 1); + } + crc = crc16(-1, buf + UBIFS_LPT_CRC_BYTES, + c->pnode_sz - UBIFS_LPT_CRC_BYTES); + addr = buf; + pos = 0; + pack_bits(&addr, &pos, crc, UBIFS_LPT_CRC_BITS); +} + +/** + * ubifs_pack_nnode - pack all the bit fields of a nnode. + * @c: UBIFS file-system description object + * @buf: buffer into which to pack + * @nnode: nnode to pack + */ +void ubifs_pack_nnode(struct ubifs_info *c, void *buf, + struct ubifs_nnode *nnode) +{ + uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES; + int i, pos = 0; + uint16_t crc; + + pack_bits(&addr, &pos, UBIFS_LPT_NNODE, UBIFS_LPT_TYPE_BITS); + if (c->big_lpt) + pack_bits(&addr, &pos, nnode->num, c->pcnt_bits); + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + int lnum = nnode->nbranch[i].lnum; + + if (lnum == 0) + lnum = c->lpt_last + 1; + pack_bits(&addr, &pos, lnum - c->lpt_first, c->lpt_lnum_bits); + pack_bits(&addr, &pos, nnode->nbranch[i].offs, + c->lpt_offs_bits); + } + crc = crc16(-1, buf + UBIFS_LPT_CRC_BYTES, + c->nnode_sz - UBIFS_LPT_CRC_BYTES); + addr = buf; + pos = 0; + pack_bits(&addr, &pos, crc, UBIFS_LPT_CRC_BITS); +} + +/** + * ubifs_pack_ltab - pack the LPT's own lprops table. + * @c: UBIFS file-system description object + * @buf: buffer into which to pack + * @ltab: LPT's own lprops table to pack + */ +void ubifs_pack_ltab(struct ubifs_info *c, void *buf, + struct ubifs_lpt_lprops *ltab) +{ + uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES; + int i, pos = 0; + uint16_t crc; + + pack_bits(&addr, &pos, UBIFS_LPT_LTAB, UBIFS_LPT_TYPE_BITS); + for (i = 0; i < c->lpt_lebs; i++) { + pack_bits(&addr, &pos, ltab[i].free, c->lpt_spc_bits); + pack_bits(&addr, &pos, ltab[i].dirty, c->lpt_spc_bits); + } + crc = crc16(-1, buf + UBIFS_LPT_CRC_BYTES, + c->ltab_sz - UBIFS_LPT_CRC_BYTES); + addr = buf; + pos = 0; + pack_bits(&addr, &pos, crc, UBIFS_LPT_CRC_BITS); +} + +/** + * ubifs_pack_lsave - pack the LPT's save table. + * @c: UBIFS file-system description object + * @buf: buffer into which to pack + * @lsave: LPT's save table to pack + */ +void ubifs_pack_lsave(struct ubifs_info *c, void *buf, int *lsave) +{ + uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES; + int i, pos = 0; + uint16_t crc; + + pack_bits(&addr, &pos, UBIFS_LPT_LSAVE, UBIFS_LPT_TYPE_BITS); + for (i = 0; i < c->lsave_cnt; i++) + pack_bits(&addr, &pos, lsave[i], c->lnum_bits); + crc = crc16(-1, buf + UBIFS_LPT_CRC_BYTES, + c->lsave_sz - UBIFS_LPT_CRC_BYTES); + addr = buf; + pos = 0; + pack_bits(&addr, &pos, crc, UBIFS_LPT_CRC_BITS); +} + +/** + * ubifs_add_lpt_dirt - add dirty space to LPT LEB properties. + * @c: UBIFS file-system description object + * @lnum: LEB number to which to add dirty space + * @dirty: amount of dirty space to add + */ +void ubifs_add_lpt_dirt(struct ubifs_info *c, int lnum, int dirty) +{ + if (!dirty || !lnum) + return; + dbg_lp("LEB %d add %d to %d", + lnum, dirty, c->ltab[lnum - c->lpt_first].dirty); + ubifs_assert(lnum >= c->lpt_first && lnum <= c->lpt_last); + c->ltab[lnum - c->lpt_first].dirty += dirty; +} + +/** + * set_ltab - set LPT LEB properties. + * @c: UBIFS file-system description object + * @lnum: LEB number + * @free: amount of free space + * @dirty: amount of dirty space + */ +static void set_ltab(struct ubifs_info *c, int lnum, int free, int dirty) +{ + dbg_lp("LEB %d free %d dirty %d to %d %d", + lnum, c->ltab[lnum - c->lpt_first].free, + c->ltab[lnum - c->lpt_first].dirty, free, dirty); + ubifs_assert(lnum >= c->lpt_first && lnum <= c->lpt_last); + c->ltab[lnum - c->lpt_first].free = free; + c->ltab[lnum - c->lpt_first].dirty = dirty; +} + +/** + * ubifs_add_nnode_dirt - add dirty space to LPT LEB properties. + * @c: UBIFS file-system description object + * @nnode: nnode for which to add dirt + */ +void ubifs_add_nnode_dirt(struct ubifs_info *c, struct ubifs_nnode *nnode) +{ + struct ubifs_nnode *np = nnode->parent; + + if (np) + ubifs_add_lpt_dirt(c, np->nbranch[nnode->iip].lnum, + c->nnode_sz); + else { + ubifs_add_lpt_dirt(c, c->lpt_lnum, c->nnode_sz); + if (!(c->lpt_drty_flgs & LTAB_DIRTY)) { + c->lpt_drty_flgs |= LTAB_DIRTY; + ubifs_add_lpt_dirt(c, c->ltab_lnum, c->ltab_sz); + } + } +} + +/** + * add_pnode_dirt - add dirty space to LPT LEB properties. + * @c: UBIFS file-system description object + * @pnode: pnode for which to add dirt + */ +static void add_pnode_dirt(struct ubifs_info *c, struct ubifs_pnode *pnode) +{ + ubifs_add_lpt_dirt(c, pnode->parent->nbranch[pnode->iip].lnum, + c->pnode_sz); +} + +/** + * calc_nnode_num - calculate nnode number. + * @row: the row in the tree (root is zero) + * @col: the column in the row (leftmost is zero) + * + * The nnode number is a number that uniquely identifies a nnode and can be used + * easily to traverse the tree from the root to that nnode. + * + * This function calculates and returns the nnode number for the nnode at @row + * and @col. + */ +static int calc_nnode_num(int row, int col) +{ + int num, bits; + + num = 1; + while (row--) { + bits = (col & (UBIFS_LPT_FANOUT - 1)); + col >>= UBIFS_LPT_FANOUT_SHIFT; + num <<= UBIFS_LPT_FANOUT_SHIFT; + num |= bits; + } + return num; +} + +/** + * calc_nnode_num_from_parent - calculate nnode number. + * @c: UBIFS file-system description object + * @parent: parent nnode + * @iip: index in parent + * + * The nnode number is a number that uniquely identifies a nnode and can be used + * easily to traverse the tree from the root to that nnode. + * + * This function calculates and returns the nnode number based on the parent's + * nnode number and the index in parent. + */ +static int calc_nnode_num_from_parent(struct ubifs_info *c, + struct ubifs_nnode *parent, int iip) +{ + int num, shft; + + if (!parent) + return 1; + shft = (c->lpt_hght - parent->level) * UBIFS_LPT_FANOUT_SHIFT; + num = parent->num ^ (1 << shft); + num |= (UBIFS_LPT_FANOUT + iip) << shft; + return num; +} + +/** + * calc_pnode_num_from_parent - calculate pnode number. + * @c: UBIFS file-system description object + * @parent: parent nnode + * @iip: index in parent + * + * The pnode number is a number that uniquely identifies a pnode and can be used + * easily to traverse the tree from the root to that pnode. + * + * This function calculates and returns the pnode number based on the parent's + * nnode number and the index in parent. + */ +static int calc_pnode_num_from_parent(struct ubifs_info *c, + struct ubifs_nnode *parent, int iip) +{ + int i, n = c->lpt_hght - 1, pnum = parent->num, num = 0; + + for (i = 0; i < n; i++) { + num <<= UBIFS_LPT_FANOUT_SHIFT; + num |= pnum & (UBIFS_LPT_FANOUT - 1); + pnum >>= UBIFS_LPT_FANOUT_SHIFT; + } + num <<= UBIFS_LPT_FANOUT_SHIFT; + num |= iip; + return num; +} + +/** + * ubifs_create_dflt_lpt - create default LPT. + * @c: UBIFS file-system description object + * @main_lebs: number of main area LEBs is passed and returned here + * @lpt_first: LEB number of first LPT LEB + * @lpt_lebs: number of LEBs for LPT is passed and returned here + * @big_lpt: use big LPT model is passed and returned here + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_create_dflt_lpt(struct ubifs_info *c, int *main_lebs, int lpt_first, + int *lpt_lebs, int *big_lpt) +{ + int lnum, err = 0, node_sz, iopos, i, j, cnt, len, alen, row; + int blnum, boffs, bsz, bcnt; + struct ubifs_pnode *pnode = NULL; + struct ubifs_nnode *nnode = NULL; + void *buf = NULL, *p; + struct ubifs_lpt_lprops *ltab = NULL; + int *lsave = NULL; + + err = calc_dflt_lpt_geom(c, main_lebs, big_lpt); + if (err) + return err; + *lpt_lebs = c->lpt_lebs; + + /* Needed by 'ubifs_pack_nnode()' and 'set_ltab()' */ + c->lpt_first = lpt_first; + /* Needed by 'set_ltab()' */ + c->lpt_last = lpt_first + c->lpt_lebs - 1; + /* Needed by 'ubifs_pack_lsave()' */ + c->main_first = c->leb_cnt - *main_lebs; + + lsave = kmalloc(sizeof(int) * c->lsave_cnt, GFP_KERNEL); + pnode = kzalloc(sizeof(struct ubifs_pnode), GFP_KERNEL); + nnode = kzalloc(sizeof(struct ubifs_nnode), GFP_KERNEL); + buf = vmalloc(c->leb_size); + ltab = vmalloc(sizeof(struct ubifs_lpt_lprops) * c->lpt_lebs); + if (!pnode || !nnode || !buf || !ltab || !lsave) { + err = -ENOMEM; + goto out; + } + + ubifs_assert(!c->ltab); + c->ltab = ltab; /* Needed by set_ltab */ + + /* Initialize LPT's own lprops */ + for (i = 0; i < c->lpt_lebs; i++) { + ltab[i].free = c->leb_size; + ltab[i].dirty = 0; + ltab[i].tgc = 0; + ltab[i].cmt = 0; + } + + lnum = lpt_first; + p = buf; + /* Number of leaf nodes (pnodes) */ + cnt = c->pnode_cnt; + + /* + * The first pnode contains the LEB properties for the LEBs that contain + * the root inode node and the root index node of the index tree. + */ + node_sz = ALIGN(ubifs_idx_node_sz(c, 1), 8); + iopos = ALIGN(node_sz, c->min_io_size); + pnode->lprops[0].free = c->leb_size - iopos; + pnode->lprops[0].dirty = iopos - node_sz; + pnode->lprops[0].flags = LPROPS_INDEX; + + node_sz = UBIFS_INO_NODE_SZ; + iopos = ALIGN(node_sz, c->min_io_size); + pnode->lprops[1].free = c->leb_size - iopos; + pnode->lprops[1].dirty = iopos - node_sz; + + for (i = 2; i < UBIFS_LPT_FANOUT; i++) + pnode->lprops[i].free = c->leb_size; + + /* Add first pnode */ + ubifs_pack_pnode(c, p, pnode); + p += c->pnode_sz; + len = c->pnode_sz; + pnode->num += 1; + + /* Reset pnode values for remaining pnodes */ + pnode->lprops[0].free = c->leb_size; + pnode->lprops[0].dirty = 0; + pnode->lprops[0].flags = 0; + + pnode->lprops[1].free = c->leb_size; + pnode->lprops[1].dirty = 0; + + /* + * To calculate the internal node branches, we keep information about + * the level below. + */ + blnum = lnum; /* LEB number of level below */ + boffs = 0; /* Offset of level below */ + bcnt = cnt; /* Number of nodes in level below */ + bsz = c->pnode_sz; /* Size of nodes in level below */ + + /* Add all remaining pnodes */ + for (i = 1; i < cnt; i++) { + if (len + c->pnode_sz > c->leb_size) { + alen = ALIGN(len, c->min_io_size); + set_ltab(c, lnum, c->leb_size - alen, alen - len); + memset(p, 0xff, alen - len); + err = ubi_leb_change(c->ubi, lnum++, buf, alen, + UBI_SHORTTERM); + if (err) + goto out; + p = buf; + len = 0; + } + ubifs_pack_pnode(c, p, pnode); + p += c->pnode_sz; + len += c->pnode_sz; + /* + * pnodes are simply numbered left to right starting at zero, + * which means the pnode number can be used easily to traverse + * down the tree to the corresponding pnode. + */ + pnode->num += 1; + } + + row = 0; + for (i = UBIFS_LPT_FANOUT; cnt > i; i <<= UBIFS_LPT_FANOUT_SHIFT) + row += 1; + /* Add all nnodes, one level at a time */ + while (1) { + /* Number of internal nodes (nnodes) at next level */ + cnt = DIV_ROUND_UP(cnt, UBIFS_LPT_FANOUT); + for (i = 0; i < cnt; i++) { + if (len + c->nnode_sz > c->leb_size) { + alen = ALIGN(len, c->min_io_size); + set_ltab(c, lnum, c->leb_size - alen, + alen - len); + memset(p, 0xff, alen - len); + err = ubi_leb_change(c->ubi, lnum++, buf, alen, + UBI_SHORTTERM); + if (err) + goto out; + p = buf; + len = 0; + } + /* Only 1 nnode at this level, so it is the root */ + if (cnt == 1) { + c->lpt_lnum = lnum; + c->lpt_offs = len; + } + /* Set branches to the level below */ + for (j = 0; j < UBIFS_LPT_FANOUT; j++) { + if (bcnt) { + if (boffs + bsz > c->leb_size) { + blnum += 1; + boffs = 0; + } + nnode->nbranch[j].lnum = blnum; + nnode->nbranch[j].offs = boffs; + boffs += bsz; + bcnt--; + } else { + nnode->nbranch[j].lnum = 0; + nnode->nbranch[j].offs = 0; + } + } + nnode->num = calc_nnode_num(row, i); + ubifs_pack_nnode(c, p, nnode); + p += c->nnode_sz; + len += c->nnode_sz; + } + /* Only 1 nnode at this level, so it is the root */ + if (cnt == 1) + break; + /* Update the information about the level below */ + bcnt = cnt; + bsz = c->nnode_sz; + row -= 1; + } + + if (*big_lpt) { + /* Need to add LPT's save table */ + if (len + c->lsave_sz > c->leb_size) { + alen = ALIGN(len, c->min_io_size); + set_ltab(c, lnum, c->leb_size - alen, alen - len); + memset(p, 0xff, alen - len); + err = ubi_leb_change(c->ubi, lnum++, buf, alen, + UBI_SHORTTERM); + if (err) + goto out; + p = buf; + len = 0; + } + + c->lsave_lnum = lnum; + c->lsave_offs = len; + + for (i = 0; i < c->lsave_cnt && i < *main_lebs; i++) + lsave[i] = c->main_first + i; + for (; i < c->lsave_cnt; i++) + lsave[i] = c->main_first; + + ubifs_pack_lsave(c, p, lsave); + p += c->lsave_sz; + len += c->lsave_sz; + } + + /* Need to add LPT's own LEB properties table */ + if (len + c->ltab_sz > c->leb_size) { + alen = ALIGN(len, c->min_io_size); + set_ltab(c, lnum, c->leb_size - alen, alen - len); + memset(p, 0xff, alen - len); + err = ubi_leb_change(c->ubi, lnum++, buf, alen, UBI_SHORTTERM); + if (err) + goto out; + p = buf; + len = 0; + } + + c->ltab_lnum = lnum; + c->ltab_offs = len; + + /* Update ltab before packing it */ + len += c->ltab_sz; + alen = ALIGN(len, c->min_io_size); + set_ltab(c, lnum, c->leb_size - alen, alen - len); + + ubifs_pack_ltab(c, p, ltab); + p += c->ltab_sz; + + /* Write remaining buffer */ + memset(p, 0xff, alen - len); + err = ubi_leb_change(c->ubi, lnum, buf, alen, UBI_SHORTTERM); + if (err) + goto out; + + c->nhead_lnum = lnum; + c->nhead_offs = ALIGN(len, c->min_io_size); + + dbg_lp("space_bits %d", c->space_bits); + dbg_lp("lpt_lnum_bits %d", c->lpt_lnum_bits); + dbg_lp("lpt_offs_bits %d", c->lpt_offs_bits); + dbg_lp("lpt_spc_bits %d", c->lpt_spc_bits); + dbg_lp("pcnt_bits %d", c->pcnt_bits); + dbg_lp("lnum_bits %d", c->lnum_bits); + dbg_lp("pnode_sz %d", c->pnode_sz); + dbg_lp("nnode_sz %d", c->nnode_sz); + dbg_lp("ltab_sz %d", c->ltab_sz); + dbg_lp("lsave_sz %d", c->lsave_sz); + dbg_lp("lsave_cnt %d", c->lsave_cnt); + dbg_lp("lpt_hght %d", c->lpt_hght); + dbg_lp("big_lpt %d", c->big_lpt); + dbg_lp("LPT root is at %d:%d", c->lpt_lnum, c->lpt_offs); + dbg_lp("LPT head is at %d:%d", c->nhead_lnum, c->nhead_offs); + dbg_lp("LPT ltab is at %d:%d", c->ltab_lnum, c->ltab_offs); + if (c->big_lpt) + dbg_lp("LPT lsave is at %d:%d", c->lsave_lnum, c->lsave_offs); +out: + c->ltab = NULL; + kfree(lsave); + vfree(ltab); + vfree(buf); + kfree(nnode); + kfree(pnode); + return err; +} + +/** + * update_cats - add LEB properties of a pnode to LEB category lists and heaps. + * @c: UBIFS file-system description object + * @pnode: pnode + * + * When a pnode is loaded into memory, the LEB properties it contains are added, + * by this function, to the LEB category lists and heaps. + */ +static void update_cats(struct ubifs_info *c, struct ubifs_pnode *pnode) +{ + int i; + + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + int cat = pnode->lprops[i].flags & LPROPS_CAT_MASK; + int lnum = pnode->lprops[i].lnum; + + if (!lnum) + return; + ubifs_add_to_cat(c, &pnode->lprops[i], cat); + } +} + +/** + * replace_cats - add LEB properties of a pnode to LEB category lists and heaps. + * @c: UBIFS file-system description object + * @old_pnode: pnode copied + * @new_pnode: pnode copy + * + * During commit it is sometimes necessary to copy a pnode + * (see dirty_cow_pnode). When that happens, references in + * category lists and heaps must be replaced. This function does that. + */ +static void replace_cats(struct ubifs_info *c, struct ubifs_pnode *old_pnode, + struct ubifs_pnode *new_pnode) +{ + int i; + + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + if (!new_pnode->lprops[i].lnum) + return; + ubifs_replace_cat(c, &old_pnode->lprops[i], + &new_pnode->lprops[i]); + } +} + +/** + * check_lpt_crc - check LPT node crc is correct. + * @c: UBIFS file-system description object + * @buf: buffer containing node + * @len: length of node + * + * This function returns %0 on success and a negative error code on failure. + */ +static int check_lpt_crc(void *buf, int len) +{ + int pos = 0; + uint8_t *addr = buf; + uint16_t crc, calc_crc; + + crc = ubifs_unpack_bits(&addr, &pos, UBIFS_LPT_CRC_BITS); + calc_crc = crc16(-1, buf + UBIFS_LPT_CRC_BYTES, + len - UBIFS_LPT_CRC_BYTES); + if (crc != calc_crc) { + ubifs_err("invalid crc in LPT node: crc %hx calc %hx", crc, + calc_crc); + dbg_dump_stack(); + return -EINVAL; + } + return 0; +} + +/** + * check_lpt_type - check LPT node type is correct. + * @c: UBIFS file-system description object + * @addr: address of type bit field is passed and returned updated here + * @pos: position of type bit field is passed and returned updated here + * @type: expected type + * + * This function returns %0 on success and a negative error code on failure. + */ +static int check_lpt_type(uint8_t **addr, int *pos, int type) +{ + int node_type; + + node_type = ubifs_unpack_bits(addr, pos, UBIFS_LPT_TYPE_BITS); + if (node_type != type) { + ubifs_err("invalid type (%d) in LPT node type %d", node_type, + type); + dbg_dump_stack(); + return -EINVAL; + } + return 0; +} + +/** + * unpack_pnode - unpack a pnode. + * @c: UBIFS file-system description object + * @buf: buffer containing packed pnode to unpack + * @pnode: pnode structure to fill + * + * This function returns %0 on success and a negative error code on failure. + */ +static int unpack_pnode(struct ubifs_info *c, void *buf, + struct ubifs_pnode *pnode) +{ + uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES; + int i, pos = 0, err; + + err = check_lpt_type(&addr, &pos, UBIFS_LPT_PNODE); + if (err) + return err; + if (c->big_lpt) + pnode->num = ubifs_unpack_bits(&addr, &pos, c->pcnt_bits); + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + struct ubifs_lprops * const lprops = &pnode->lprops[i]; + + lprops->free = ubifs_unpack_bits(&addr, &pos, c->space_bits); + lprops->free <<= 3; + lprops->dirty = ubifs_unpack_bits(&addr, &pos, c->space_bits); + lprops->dirty <<= 3; + + if (ubifs_unpack_bits(&addr, &pos, 1)) + lprops->flags = LPROPS_INDEX; + else + lprops->flags = 0; + lprops->flags |= ubifs_categorize_lprops(c, lprops); + } + err = check_lpt_crc(buf, c->pnode_sz); + return err; +} + +/** + * unpack_nnode - unpack a nnode. + * @c: UBIFS file-system description object + * @buf: buffer containing packed nnode to unpack + * @nnode: nnode structure to fill + * + * This function returns %0 on success and a negative error code on failure. + */ +static int unpack_nnode(struct ubifs_info *c, void *buf, + struct ubifs_nnode *nnode) +{ + uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES; + int i, pos = 0, err; + + err = check_lpt_type(&addr, &pos, UBIFS_LPT_NNODE); + if (err) + return err; + if (c->big_lpt) + nnode->num = ubifs_unpack_bits(&addr, &pos, c->pcnt_bits); + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + int lnum; + + lnum = ubifs_unpack_bits(&addr, &pos, c->lpt_lnum_bits) + + c->lpt_first; + if (lnum == c->lpt_last + 1) + lnum = 0; + nnode->nbranch[i].lnum = lnum; + nnode->nbranch[i].offs = ubifs_unpack_bits(&addr, &pos, + c->lpt_offs_bits); + } + err = check_lpt_crc(buf, c->nnode_sz); + return err; +} + +/** + * unpack_ltab - unpack the LPT's own lprops table. + * @c: UBIFS file-system description object + * @buf: buffer from which to unpack + * + * This function returns %0 on success and a negative error code on failure. + */ +static int unpack_ltab(struct ubifs_info *c, void *buf) +{ + uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES; + int i, pos = 0, err; + + err = check_lpt_type(&addr, &pos, UBIFS_LPT_LTAB); + if (err) + return err; + for (i = 0; i < c->lpt_lebs; i++) { + int free = ubifs_unpack_bits(&addr, &pos, c->lpt_spc_bits); + int dirty = ubifs_unpack_bits(&addr, &pos, c->lpt_spc_bits); + + if (free < 0 || free > c->leb_size || dirty < 0 || + dirty > c->leb_size || free + dirty > c->leb_size) + return -EINVAL; + + c->ltab[i].free = free; + c->ltab[i].dirty = dirty; + c->ltab[i].tgc = 0; + c->ltab[i].cmt = 0; + } + err = check_lpt_crc(buf, c->ltab_sz); + return err; +} + +/** + * unpack_lsave - unpack the LPT's save table. + * @c: UBIFS file-system description object + * @buf: buffer from which to unpack + * + * This function returns %0 on success and a negative error code on failure. + */ +static int unpack_lsave(struct ubifs_info *c, void *buf) +{ + uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES; + int i, pos = 0, err; + + err = check_lpt_type(&addr, &pos, UBIFS_LPT_LSAVE); + if (err) + return err; + for (i = 0; i < c->lsave_cnt; i++) { + int lnum = ubifs_unpack_bits(&addr, &pos, c->lnum_bits); + + if (lnum < c->main_first || lnum >= c->leb_cnt) + return -EINVAL; + c->lsave[i] = lnum; + } + err = check_lpt_crc(buf, c->lsave_sz); + return err; +} + +/** + * validate_nnode - validate a nnode. + * @c: UBIFS file-system description object + * @nnode: nnode to validate + * @parent: parent nnode (or NULL for the root nnode) + * @iip: index in parent + * + * This function returns %0 on success and a negative error code on failure. + */ +static int validate_nnode(struct ubifs_info *c, struct ubifs_nnode *nnode, + struct ubifs_nnode *parent, int iip) +{ + int i, lvl, max_offs; + + if (c->big_lpt) { + int num = calc_nnode_num_from_parent(c, parent, iip); + + if (nnode->num != num) + return -EINVAL; + } + lvl = parent ? parent->level - 1 : c->lpt_hght; + if (lvl < 1) + return -EINVAL; + if (lvl == 1) + max_offs = c->leb_size - c->pnode_sz; + else + max_offs = c->leb_size - c->nnode_sz; + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + int lnum = nnode->nbranch[i].lnum; + int offs = nnode->nbranch[i].offs; + + if (lnum == 0) { + if (offs != 0) + return -EINVAL; + continue; + } + if (lnum < c->lpt_first || lnum > c->lpt_last) + return -EINVAL; + if (offs < 0 || offs > max_offs) + return -EINVAL; + } + return 0; +} + +/** + * validate_pnode - validate a pnode. + * @c: UBIFS file-system description object + * @pnode: pnode to validate + * @parent: parent nnode + * @iip: index in parent + * + * This function returns %0 on success and a negative error code on failure. + */ +static int validate_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode, + struct ubifs_nnode *parent, int iip) +{ + int i; + + if (c->big_lpt) { + int num = calc_pnode_num_from_parent(c, parent, iip); + + if (pnode->num != num) + return -EINVAL; + } + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + int free = pnode->lprops[i].free; + int dirty = pnode->lprops[i].dirty; + + if (free < 0 || free > c->leb_size || free % c->min_io_size || + (free & 7)) + return -EINVAL; + if (dirty < 0 || dirty > c->leb_size || (dirty & 7)) + return -EINVAL; + if (dirty + free > c->leb_size) + return -EINVAL; + } + return 0; +} + +/** + * set_pnode_lnum - set LEB numbers on a pnode. + * @c: UBIFS file-system description object + * @pnode: pnode to update + * + * This function calculates the LEB numbers for the LEB properties it contains + * based on the pnode number. + */ +static void set_pnode_lnum(struct ubifs_info *c, struct ubifs_pnode *pnode) +{ + int i, lnum; + + lnum = (pnode->num << UBIFS_LPT_FANOUT_SHIFT) + c->main_first; + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + if (lnum >= c->leb_cnt) + return; + pnode->lprops[i].lnum = lnum++; + } +} + +/** + * ubifs_read_nnode - read a nnode from flash and link it to the tree in memory. + * @c: UBIFS file-system description object + * @parent: parent nnode (or NULL for the root) + * @iip: index in parent + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_read_nnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip) +{ + struct ubifs_nbranch *branch = NULL; + struct ubifs_nnode *nnode = NULL; + void *buf = c->lpt_nod_buf; + int err, lnum, offs; + + if (parent) { + branch = &parent->nbranch[iip]; + lnum = branch->lnum; + offs = branch->offs; + } else { + lnum = c->lpt_lnum; + offs = c->lpt_offs; + } + nnode = kzalloc(sizeof(struct ubifs_nnode), GFP_NOFS); + if (!nnode) { + err = -ENOMEM; + goto out; + } + if (lnum == 0) { + /* + * This nnode was not written which just means that the LEB + * properties in the subtree below it describe empty LEBs. We + * make the nnode as though we had read it, which in fact means + * doing almost nothing. + */ + if (c->big_lpt) + nnode->num = calc_nnode_num_from_parent(c, parent, iip); + } else { + err = ubi_read(c->ubi, lnum, buf, offs, c->nnode_sz); + if (err) + goto out; + err = unpack_nnode(c, buf, nnode); + if (err) + goto out; + } + err = validate_nnode(c, nnode, parent, iip); + if (err) + goto out; + if (!c->big_lpt) + nnode->num = calc_nnode_num_from_parent(c, parent, iip); + if (parent) { + branch->nnode = nnode; + nnode->level = parent->level - 1; + } else { + c->nroot = nnode; + nnode->level = c->lpt_hght; + } + nnode->parent = parent; + nnode->iip = iip; + return 0; + +out: + ubifs_err("error %d reading nnode at %d:%d", err, lnum, offs); + kfree(nnode); + return err; +} + +/** + * read_pnode - read a pnode from flash and link it to the tree in memory. + * @c: UBIFS file-system description object + * @parent: parent nnode + * @iip: index in parent + * + * This function returns %0 on success and a negative error code on failure. + */ +static int read_pnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip) +{ + struct ubifs_nbranch *branch; + struct ubifs_pnode *pnode = NULL; + void *buf = c->lpt_nod_buf; + int err, lnum, offs; + + branch = &parent->nbranch[iip]; + lnum = branch->lnum; + offs = branch->offs; + pnode = kzalloc(sizeof(struct ubifs_pnode), GFP_NOFS); + if (!pnode) { + err = -ENOMEM; + goto out; + } + if (lnum == 0) { + /* + * This pnode was not written which just means that the LEB + * properties in it describe empty LEBs. We make the pnode as + * though we had read it. + */ + int i; + + if (c->big_lpt) + pnode->num = calc_pnode_num_from_parent(c, parent, iip); + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + struct ubifs_lprops * const lprops = &pnode->lprops[i]; + + lprops->free = c->leb_size; + lprops->flags = ubifs_categorize_lprops(c, lprops); + } + } else { + err = ubi_read(c->ubi, lnum, buf, offs, c->pnode_sz); + if (err) + goto out; + err = unpack_pnode(c, buf, pnode); + if (err) + goto out; + } + err = validate_pnode(c, pnode, parent, iip); + if (err) + goto out; + if (!c->big_lpt) + pnode->num = calc_pnode_num_from_parent(c, parent, iip); + branch->pnode = pnode; + pnode->parent = parent; + pnode->iip = iip; + set_pnode_lnum(c, pnode); + c->pnodes_have += 1; + return 0; + +out: + ubifs_err("error %d reading pnode at %d:%d", err, lnum, offs); + dbg_dump_pnode(c, pnode, parent, iip); + dbg_msg("calc num: %d", calc_pnode_num_from_parent(c, parent, iip)); + kfree(pnode); + return err; +} + +/** + * read_ltab - read LPT's own lprops table. + * @c: UBIFS file-system description object + * + * This function returns %0 on success and a negative error code on failure. + */ +static int read_ltab(struct ubifs_info *c) +{ + int err; + void *buf; + + buf = vmalloc(c->ltab_sz); + if (!buf) + return -ENOMEM; + err = ubi_read(c->ubi, c->ltab_lnum, buf, c->ltab_offs, c->ltab_sz); + if (err) + goto out; + err = unpack_ltab(c, buf); +out: + vfree(buf); + return err; +} + +/** + * read_lsave - read LPT's save table. + * @c: UBIFS file-system description object + * + * This function returns %0 on success and a negative error code on failure. + */ +static int read_lsave(struct ubifs_info *c) +{ + int err, i; + void *buf; + + buf = vmalloc(c->lsave_sz); + if (!buf) + return -ENOMEM; + err = ubi_read(c->ubi, c->lsave_lnum, buf, c->lsave_offs, c->lsave_sz); + if (err) + goto out; + err = unpack_lsave(c, buf); + if (err) + goto out; + for (i = 0; i < c->lsave_cnt; i++) { + int lnum = c->lsave[i]; + + /* + * Due to automatic resizing, the values in the lsave table + * could be beyond the volume size - just ignore them. + */ + if (lnum >= c->leb_cnt) + continue; + ubifs_lpt_lookup(c, lnum); + } +out: + vfree(buf); + return err; +} + +/** + * ubifs_get_nnode - get a nnode. + * @c: UBIFS file-system description object + * @parent: parent nnode (or NULL for the root) + * @iip: index in parent + * + * This function returns a pointer to the nnode on success or a negative error + * code on failure. + */ +struct ubifs_nnode *ubifs_get_nnode(struct ubifs_info *c, + struct ubifs_nnode *parent, int iip) +{ + struct ubifs_nbranch *branch; + struct ubifs_nnode *nnode; + int err; + + branch = &parent->nbranch[iip]; + nnode = branch->nnode; + if (nnode) + return nnode; + err = ubifs_read_nnode(c, parent, iip); + if (err) + return ERR_PTR(err); + return branch->nnode; +} + +/** + * ubifs_get_pnode - get a pnode. + * @c: UBIFS file-system description object + * @parent: parent nnode + * @iip: index in parent + * + * This function returns a pointer to the pnode on success or a negative error + * code on failure. + */ +struct ubifs_pnode *ubifs_get_pnode(struct ubifs_info *c, + struct ubifs_nnode *parent, int iip) +{ + struct ubifs_nbranch *branch; + struct ubifs_pnode *pnode; + int err; + + branch = &parent->nbranch[iip]; + pnode = branch->pnode; + if (pnode) + return pnode; + err = read_pnode(c, parent, iip); + if (err) + return ERR_PTR(err); + update_cats(c, branch->pnode); + return branch->pnode; +} + +/** + * ubifs_lpt_lookup - lookup LEB properties in the LPT. + * @c: UBIFS file-system description object + * @lnum: LEB number to lookup + * + * This function returns a pointer to the LEB properties on success or a + * negative error code on failure. + */ +struct ubifs_lprops *ubifs_lpt_lookup(struct ubifs_info *c, int lnum) +{ + int err, i, h, iip, shft; + struct ubifs_nnode *nnode; + struct ubifs_pnode *pnode; + + if (!c->nroot) { + err = ubifs_read_nnode(c, NULL, 0); + if (err) + return ERR_PTR(err); + } + nnode = c->nroot; + i = lnum - c->main_first; + shft = c->lpt_hght * UBIFS_LPT_FANOUT_SHIFT; + for (h = 1; h < c->lpt_hght; h++) { + iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1)); + shft -= UBIFS_LPT_FANOUT_SHIFT; + nnode = ubifs_get_nnode(c, nnode, iip); + if (IS_ERR(nnode)) + return ERR_PTR(PTR_ERR(nnode)); + } + iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1)); + shft -= UBIFS_LPT_FANOUT_SHIFT; + pnode = ubifs_get_pnode(c, nnode, iip); + if (IS_ERR(pnode)) + return ERR_PTR(PTR_ERR(pnode)); + iip = (i & (UBIFS_LPT_FANOUT - 1)); + dbg_lp("LEB %d, free %d, dirty %d, flags %d", lnum, + pnode->lprops[iip].free, pnode->lprops[iip].dirty, + pnode->lprops[iip].flags); + return &pnode->lprops[iip]; +} + +/** + * dirty_cow_nnode - ensure a nnode is not being committed. + * @c: UBIFS file-system description object + * @nnode: nnode to check + * + * Returns dirtied nnode on success or negative error code on failure. + */ +static struct ubifs_nnode *dirty_cow_nnode(struct ubifs_info *c, + struct ubifs_nnode *nnode) +{ + struct ubifs_nnode *n; + int i; + + if (!test_bit(COW_CNODE, &nnode->flags)) { + /* nnode is not being committed */ + if (!test_and_set_bit(DIRTY_CNODE, &nnode->flags)) { + c->dirty_nn_cnt += 1; + ubifs_add_nnode_dirt(c, nnode); + } + return nnode; + } + + /* nnode is being committed, so copy it */ + n = kmalloc(sizeof(struct ubifs_nnode), GFP_NOFS); + if (unlikely(!n)) + return ERR_PTR(-ENOMEM); + + memcpy(n, nnode, sizeof(struct ubifs_nnode)); + n->cnext = NULL; + __set_bit(DIRTY_CNODE, &n->flags); + __clear_bit(COW_CNODE, &n->flags); + + /* The children now have new parent */ + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + struct ubifs_nbranch *branch = &n->nbranch[i]; + + if (branch->cnode) + branch->cnode->parent = n; + } + + ubifs_assert(!test_bit(OBSOLETE_CNODE, &nnode->flags)); + __set_bit(OBSOLETE_CNODE, &nnode->flags); + + c->dirty_nn_cnt += 1; + ubifs_add_nnode_dirt(c, nnode); + if (nnode->parent) + nnode->parent->nbranch[n->iip].nnode = n; + else + c->nroot = n; + return n; +} + +/** + * dirty_cow_pnode - ensure a pnode is not being committed. + * @c: UBIFS file-system description object + * @pnode: pnode to check + * + * Returns dirtied pnode on success or negative error code on failure. + */ +static struct ubifs_pnode *dirty_cow_pnode(struct ubifs_info *c, + struct ubifs_pnode *pnode) +{ + struct ubifs_pnode *p; + + if (!test_bit(COW_CNODE, &pnode->flags)) { + /* pnode is not being committed */ + if (!test_and_set_bit(DIRTY_CNODE, &pnode->flags)) { + c->dirty_pn_cnt += 1; + add_pnode_dirt(c, pnode); + } + return pnode; + } + + /* pnode is being committed, so copy it */ + p = kmalloc(sizeof(struct ubifs_pnode), GFP_NOFS); + if (unlikely(!p)) + return ERR_PTR(-ENOMEM); + + memcpy(p, pnode, sizeof(struct ubifs_pnode)); + p->cnext = NULL; + __set_bit(DIRTY_CNODE, &p->flags); + __clear_bit(COW_CNODE, &p->flags); + replace_cats(c, pnode, p); + + ubifs_assert(!test_bit(OBSOLETE_CNODE, &pnode->flags)); + __set_bit(OBSOLETE_CNODE, &pnode->flags); + + c->dirty_pn_cnt += 1; + add_pnode_dirt(c, pnode); + pnode->parent->nbranch[p->iip].pnode = p; + return p; +} + +/** + * ubifs_lpt_lookup_dirty - lookup LEB properties in the LPT. + * @c: UBIFS file-system description object + * @lnum: LEB number to lookup + * + * This function returns a pointer to the LEB properties on success or a + * negative error code on failure. + */ +struct ubifs_lprops *ubifs_lpt_lookup_dirty(struct ubifs_info *c, int lnum) +{ + int err, i, h, iip, shft; + struct ubifs_nnode *nnode; + struct ubifs_pnode *pnode; + + if (!c->nroot) { + err = ubifs_read_nnode(c, NULL, 0); + if (err) + return ERR_PTR(err); + } + nnode = c->nroot; + nnode = dirty_cow_nnode(c, nnode); + if (IS_ERR(nnode)) + return ERR_PTR(PTR_ERR(nnode)); + i = lnum - c->main_first; + shft = c->lpt_hght * UBIFS_LPT_FANOUT_SHIFT; + for (h = 1; h < c->lpt_hght; h++) { + iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1)); + shft -= UBIFS_LPT_FANOUT_SHIFT; + nnode = ubifs_get_nnode(c, nnode, iip); + if (IS_ERR(nnode)) + return ERR_PTR(PTR_ERR(nnode)); + nnode = dirty_cow_nnode(c, nnode); + if (IS_ERR(nnode)) + return ERR_PTR(PTR_ERR(nnode)); + } + iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1)); + shft -= UBIFS_LPT_FANOUT_SHIFT; + pnode = ubifs_get_pnode(c, nnode, iip); + if (IS_ERR(pnode)) + return ERR_PTR(PTR_ERR(pnode)); + pnode = dirty_cow_pnode(c, pnode); + if (IS_ERR(pnode)) + return ERR_PTR(PTR_ERR(pnode)); + iip = (i & (UBIFS_LPT_FANOUT - 1)); + dbg_lp("LEB %d, free %d, dirty %d, flags %d", lnum, + pnode->lprops[iip].free, pnode->lprops[iip].dirty, + pnode->lprops[iip].flags); + ubifs_assert(test_bit(DIRTY_CNODE, &pnode->flags)); + return &pnode->lprops[iip]; +} + +/** + * lpt_init_rd - initialize the LPT for reading. + * @c: UBIFS file-system description object + * + * This function returns %0 on success and a negative error code on failure. + */ +static int lpt_init_rd(struct ubifs_info *c) +{ + int err, i; + + c->ltab = vmalloc(sizeof(struct ubifs_lpt_lprops) * c->lpt_lebs); + if (!c->ltab) + return -ENOMEM; + + i = max_t(int, c->nnode_sz, c->pnode_sz); + c->lpt_nod_buf = kmalloc(i, GFP_KERNEL); + if (!c->lpt_nod_buf) + return -ENOMEM; + + for (i = 0; i < LPROPS_HEAP_CNT; i++) { + c->lpt_heap[i].arr = kmalloc(sizeof(void *) * LPT_HEAP_SZ, + GFP_KERNEL); + if (!c->lpt_heap[i].arr) + return -ENOMEM; + c->lpt_heap[i].cnt = 0; + c->lpt_heap[i].max_cnt = LPT_HEAP_SZ; + } + + c->dirty_idx.arr = kmalloc(sizeof(void *) * LPT_HEAP_SZ, GFP_KERNEL); + if (!c->dirty_idx.arr) + return -ENOMEM; + c->dirty_idx.cnt = 0; + c->dirty_idx.max_cnt = LPT_HEAP_SZ; + + err = read_ltab(c); + if (err) + return err; + + dbg_lp("space_bits %d", c->space_bits); + dbg_lp("lpt_lnum_bits %d", c->lpt_lnum_bits); + dbg_lp("lpt_offs_bits %d", c->lpt_offs_bits); + dbg_lp("lpt_spc_bits %d", c->lpt_spc_bits); + dbg_lp("pcnt_bits %d", c->pcnt_bits); + dbg_lp("lnum_bits %d", c->lnum_bits); + dbg_lp("pnode_sz %d", c->pnode_sz); + dbg_lp("nnode_sz %d", c->nnode_sz); + dbg_lp("ltab_sz %d", c->ltab_sz); + dbg_lp("lsave_sz %d", c->lsave_sz); + dbg_lp("lsave_cnt %d", c->lsave_cnt); + dbg_lp("lpt_hght %d", c->lpt_hght); + dbg_lp("big_lpt %d", c->big_lpt); + dbg_lp("LPT root is at %d:%d", c->lpt_lnum, c->lpt_offs); + dbg_lp("LPT head is at %d:%d", c->nhead_lnum, c->nhead_offs); + dbg_lp("LPT ltab is at %d:%d", c->ltab_lnum, c->ltab_offs); + if (c->big_lpt) + dbg_lp("LPT lsave is at %d:%d", c->lsave_lnum, c->lsave_offs); + + return 0; +} + +/** + * lpt_init_wr - initialize the LPT for writing. + * @c: UBIFS file-system description object + * + * 'lpt_init_rd()' must have been called already. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int lpt_init_wr(struct ubifs_info *c) +{ + int err, i; + + c->ltab_cmt = vmalloc(sizeof(struct ubifs_lpt_lprops) * c->lpt_lebs); + if (!c->ltab_cmt) + return -ENOMEM; + + c->lpt_buf = vmalloc(c->leb_size); + if (!c->lpt_buf) + return -ENOMEM; + + if (c->big_lpt) { + c->lsave = kmalloc(sizeof(int) * c->lsave_cnt, GFP_NOFS); + if (!c->lsave) + return -ENOMEM; + err = read_lsave(c); + if (err) + return err; + } + + for (i = 0; i < c->lpt_lebs; i++) + if (c->ltab[i].free == c->leb_size) { + err = ubifs_leb_unmap(c, i + c->lpt_first); + if (err) + return err; + } + + return 0; +} + +/** + * ubifs_lpt_init - initialize the LPT. + * @c: UBIFS file-system description object + * @rd: whether to initialize lpt for reading + * @wr: whether to initialize lpt for writing + * + * For mounting 'rw', @rd and @wr are both true. For mounting 'ro', @rd is true + * and @wr is false. For mounting from 'ro' to 'rw', @rd is false and @wr is + * true. + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_lpt_init(struct ubifs_info *c, int rd, int wr) +{ + int err; + + if (rd) { + err = lpt_init_rd(c); + if (err) + return err; + } + + if (wr) { + err = lpt_init_wr(c); + if (err) + return err; + } + + return 0; +} + +/** + * struct lpt_scan_node - somewhere to put nodes while we scan LPT. + * @nnode: where to keep a nnode + * @pnode: where to keep a pnode + * @cnode: where to keep a cnode + * @in_tree: is the node in the tree in memory + * @ptr.nnode: pointer to the nnode (if it is an nnode) which may be here or in + * the tree + * @ptr.pnode: ditto for pnode + * @ptr.cnode: ditto for cnode + */ +struct lpt_scan_node { + union { + struct ubifs_nnode nnode; + struct ubifs_pnode pnode; + struct ubifs_cnode cnode; + }; + int in_tree; + union { + struct ubifs_nnode *nnode; + struct ubifs_pnode *pnode; + struct ubifs_cnode *cnode; + } ptr; +}; + +/** + * scan_get_nnode - for the scan, get a nnode from either the tree or flash. + * @c: the UBIFS file-system description object + * @path: where to put the nnode + * @parent: parent of the nnode + * @iip: index in parent of the nnode + * + * This function returns a pointer to the nnode on success or a negative error + * code on failure. + */ +static struct ubifs_nnode *scan_get_nnode(struct ubifs_info *c, + struct lpt_scan_node *path, + struct ubifs_nnode *parent, int iip) +{ + struct ubifs_nbranch *branch; + struct ubifs_nnode *nnode; + void *buf = c->lpt_nod_buf; + int err; + + branch = &parent->nbranch[iip]; + nnode = branch->nnode; + if (nnode) { + path->in_tree = 1; + path->ptr.nnode = nnode; + return nnode; + } + nnode = &path->nnode; + path->in_tree = 0; + path->ptr.nnode = nnode; + memset(nnode, 0, sizeof(struct ubifs_nnode)); + if (branch->lnum == 0) { + /* + * This nnode was not written which just means that the LEB + * properties in the subtree below it describe empty LEBs. We + * make the nnode as though we had read it, which in fact means + * doing almost nothing. + */ + if (c->big_lpt) + nnode->num = calc_nnode_num_from_parent(c, parent, iip); + } else { + err = ubi_read(c->ubi, branch->lnum, buf, branch->offs, + c->nnode_sz); + if (err) + return ERR_PTR(err); + err = unpack_nnode(c, buf, nnode); + if (err) + return ERR_PTR(err); + } + err = validate_nnode(c, nnode, parent, iip); + if (err) + return ERR_PTR(err); + if (!c->big_lpt) + nnode->num = calc_nnode_num_from_parent(c, parent, iip); + nnode->level = parent->level - 1; + nnode->parent = parent; + nnode->iip = iip; + return nnode; +} + +/** + * scan_get_pnode - for the scan, get a pnode from either the tree or flash. + * @c: the UBIFS file-system description object + * @path: where to put the pnode + * @parent: parent of the pnode + * @iip: index in parent of the pnode + * + * This function returns a pointer to the pnode on success or a negative error + * code on failure. + */ +static struct ubifs_pnode *scan_get_pnode(struct ubifs_info *c, + struct lpt_scan_node *path, + struct ubifs_nnode *parent, int iip) +{ + struct ubifs_nbranch *branch; + struct ubifs_pnode *pnode; + void *buf = c->lpt_nod_buf; + int err; + + branch = &parent->nbranch[iip]; + pnode = branch->pnode; + if (pnode) { + path->in_tree = 1; + path->ptr.pnode = pnode; + return pnode; + } + pnode = &path->pnode; + path->in_tree = 0; + path->ptr.pnode = pnode; + memset(pnode, 0, sizeof(struct ubifs_pnode)); + if (branch->lnum == 0) { + /* + * This pnode was not written which just means that the LEB + * properties in it describe empty LEBs. We make the pnode as + * though we had read it. + */ + int i; + + if (c->big_lpt) + pnode->num = calc_pnode_num_from_parent(c, parent, iip); + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + struct ubifs_lprops * const lprops = &pnode->lprops[i]; + + lprops->free = c->leb_size; + lprops->flags = ubifs_categorize_lprops(c, lprops); + } + } else { + ubifs_assert(branch->lnum >= c->lpt_first && + branch->lnum <= c->lpt_last); + ubifs_assert(branch->offs >= 0 && branch->offs < c->leb_size); + err = ubi_read(c->ubi, branch->lnum, buf, branch->offs, + c->pnode_sz); + if (err) + return ERR_PTR(err); + err = unpack_pnode(c, buf, pnode); + if (err) + return ERR_PTR(err); + } + err = validate_pnode(c, pnode, parent, iip); + if (err) + return ERR_PTR(err); + if (!c->big_lpt) + pnode->num = calc_pnode_num_from_parent(c, parent, iip); + pnode->parent = parent; + pnode->iip = iip; + set_pnode_lnum(c, pnode); + return pnode; +} + +/** + * ubifs_lpt_scan_nolock - scan the LPT. + * @c: the UBIFS file-system description object + * @start_lnum: LEB number from which to start scanning + * @end_lnum: LEB number at which to stop scanning + * @scan_cb: callback function called for each lprops + * @data: data to be passed to the callback function + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_lpt_scan_nolock(struct ubifs_info *c, int start_lnum, int end_lnum, + ubifs_lpt_scan_callback scan_cb, void *data) +{ + int err = 0, i, h, iip, shft; + struct ubifs_nnode *nnode; + struct ubifs_pnode *pnode; + struct lpt_scan_node *path; + + if (start_lnum == -1) { + start_lnum = end_lnum + 1; + if (start_lnum >= c->leb_cnt) + start_lnum = c->main_first; + } + + ubifs_assert(start_lnum >= c->main_first && start_lnum < c->leb_cnt); + ubifs_assert(end_lnum >= c->main_first && end_lnum < c->leb_cnt); + + if (!c->nroot) { + err = ubifs_read_nnode(c, NULL, 0); + if (err) + return err; + } + + path = kmalloc(sizeof(struct lpt_scan_node) * (c->lpt_hght + 1), + GFP_NOFS); + if (!path) + return -ENOMEM; + + path[0].ptr.nnode = c->nroot; + path[0].in_tree = 1; +again: + /* Descend to the pnode containing start_lnum */ + nnode = c->nroot; + i = start_lnum - c->main_first; + shft = c->lpt_hght * UBIFS_LPT_FANOUT_SHIFT; + for (h = 1; h < c->lpt_hght; h++) { + iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1)); + shft -= UBIFS_LPT_FANOUT_SHIFT; + nnode = scan_get_nnode(c, path + h, nnode, iip); + if (IS_ERR(nnode)) { + err = PTR_ERR(nnode); + goto out; + } + } + iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1)); + shft -= UBIFS_LPT_FANOUT_SHIFT; + pnode = scan_get_pnode(c, path + h, nnode, iip); + if (IS_ERR(pnode)) { + err = PTR_ERR(pnode); + goto out; + } + iip = (i & (UBIFS_LPT_FANOUT - 1)); + + /* Loop for each lprops */ + while (1) { + struct ubifs_lprops *lprops = &pnode->lprops[iip]; + int ret, lnum = lprops->lnum; + + ret = scan_cb(c, lprops, path[h].in_tree, data); + if (ret < 0) { + err = ret; + goto out; + } + if (ret & LPT_SCAN_ADD) { + /* Add all the nodes in path to the tree in memory */ + for (h = 1; h < c->lpt_hght; h++) { + const size_t sz = sizeof(struct ubifs_nnode); + struct ubifs_nnode *parent; + + if (path[h].in_tree) + continue; + nnode = kmalloc(sz, GFP_NOFS); + if (!nnode) { + err = -ENOMEM; + goto out; + } + memcpy(nnode, &path[h].nnode, sz); + parent = nnode->parent; + parent->nbranch[nnode->iip].nnode = nnode; + path[h].ptr.nnode = nnode; + path[h].in_tree = 1; + path[h + 1].cnode.parent = nnode; + } + if (path[h].in_tree) + ubifs_ensure_cat(c, lprops); + else { + const size_t sz = sizeof(struct ubifs_pnode); + struct ubifs_nnode *parent; + + pnode = kmalloc(sz, GFP_NOFS); + if (!pnode) { + err = -ENOMEM; + goto out; + } + memcpy(pnode, &path[h].pnode, sz); + parent = pnode->parent; + parent->nbranch[pnode->iip].pnode = pnode; + path[h].ptr.pnode = pnode; + path[h].in_tree = 1; + update_cats(c, pnode); + c->pnodes_have += 1; + } + err = dbg_check_lpt_nodes(c, (struct ubifs_cnode *) + c->nroot, 0, 0); + if (err) + goto out; + err = dbg_check_cats(c); + if (err) + goto out; + } + if (ret & LPT_SCAN_STOP) { + err = 0; + break; + } + /* Get the next lprops */ + if (lnum == end_lnum) { + /* + * We got to the end without finding what we were + * looking for + */ + err = -ENOSPC; + goto out; + } + if (lnum + 1 >= c->leb_cnt) { + /* Wrap-around to the beginning */ + start_lnum = c->main_first; + goto again; + } + if (iip + 1 < UBIFS_LPT_FANOUT) { + /* Next lprops is in the same pnode */ + iip += 1; + continue; + } + /* We need to get the next pnode. Go up until we can go right */ + iip = pnode->iip; + while (1) { + h -= 1; + ubifs_assert(h >= 0); + nnode = path[h].ptr.nnode; + if (iip + 1 < UBIFS_LPT_FANOUT) + break; + iip = nnode->iip; + } + /* Go right */ + iip += 1; + /* Descend to the pnode */ + h += 1; + for (; h < c->lpt_hght; h++) { + nnode = scan_get_nnode(c, path + h, nnode, iip); + if (IS_ERR(nnode)) { + err = PTR_ERR(nnode); + goto out; + } + iip = 0; + } + pnode = scan_get_pnode(c, path + h, nnode, iip); + if (IS_ERR(pnode)) { + err = PTR_ERR(pnode); + goto out; + } + iip = 0; + } +out: + kfree(path); + return err; +} + +#ifdef CONFIG_UBIFS_FS_DEBUG + +/** + * dbg_chk_pnode - check a pnode. + * @c: the UBIFS file-system description object + * @pnode: pnode to check + * @col: pnode column + * + * This function returns %0 on success and a negative error code on failure. + */ +static int dbg_chk_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode, + int col) +{ + int i; + + if (pnode->num != col) { + dbg_err("pnode num %d expected %d parent num %d iip %d", + pnode->num, col, pnode->parent->num, pnode->iip); + return -EINVAL; + } + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + struct ubifs_lprops *lp, *lprops = &pnode->lprops[i]; + int lnum = (pnode->num << UBIFS_LPT_FANOUT_SHIFT) + i + + c->main_first; + int found, cat = lprops->flags & LPROPS_CAT_MASK; + struct ubifs_lpt_heap *heap; + struct list_head *list = NULL; + + if (lnum >= c->leb_cnt) + continue; + if (lprops->lnum != lnum) { + dbg_err("bad LEB number %d expected %d", + lprops->lnum, lnum); + return -EINVAL; + } + if (lprops->flags & LPROPS_TAKEN) { + if (cat != LPROPS_UNCAT) { + dbg_err("LEB %d taken but not uncat %d", + lprops->lnum, cat); + return -EINVAL; + } + continue; + } + if (lprops->flags & LPROPS_INDEX) { + switch (cat) { + case LPROPS_UNCAT: + case LPROPS_DIRTY_IDX: + case LPROPS_FRDI_IDX: + break; + default: + dbg_err("LEB %d index but cat %d", + lprops->lnum, cat); + return -EINVAL; + } + } else { + switch (cat) { + case LPROPS_UNCAT: + case LPROPS_DIRTY: + case LPROPS_FREE: + case LPROPS_EMPTY: + case LPROPS_FREEABLE: + break; + default: + dbg_err("LEB %d not index but cat %d", + lprops->lnum, cat); + return -EINVAL; + } + } + switch (cat) { + case LPROPS_UNCAT: + list = &c->uncat_list; + break; + case LPROPS_EMPTY: + list = &c->empty_list; + break; + case LPROPS_FREEABLE: + list = &c->freeable_list; + break; + case LPROPS_FRDI_IDX: + list = &c->frdi_idx_list; + break; + } + found = 0; + switch (cat) { + case LPROPS_DIRTY: + case LPROPS_DIRTY_IDX: + case LPROPS_FREE: + heap = &c->lpt_heap[cat - 1]; + if (lprops->hpos < heap->cnt && + heap->arr[lprops->hpos] == lprops) + found = 1; + break; + case LPROPS_UNCAT: + case LPROPS_EMPTY: + case LPROPS_FREEABLE: + case LPROPS_FRDI_IDX: + list_for_each_entry(lp, list, list) + if (lprops == lp) { + found = 1; + break; + } + break; + } + if (!found) { + dbg_err("LEB %d cat %d not found in cat heap/list", + lprops->lnum, cat); + return -EINVAL; + } + switch (cat) { + case LPROPS_EMPTY: + if (lprops->free != c->leb_size) { + dbg_err("LEB %d cat %d free %d dirty %d", + lprops->lnum, cat, lprops->free, + lprops->dirty); + return -EINVAL; + } + case LPROPS_FREEABLE: + case LPROPS_FRDI_IDX: + if (lprops->free + lprops->dirty != c->leb_size) { + dbg_err("LEB %d cat %d free %d dirty %d", + lprops->lnum, cat, lprops->free, + lprops->dirty); + return -EINVAL; + } + } + } + return 0; +} + +/** + * dbg_check_lpt_nodes - check nnodes and pnodes. + * @c: the UBIFS file-system description object + * @cnode: next cnode (nnode or pnode) to check + * @row: row of cnode (root is zero) + * @col: column of cnode (leftmost is zero) + * + * This function returns %0 on success and a negative error code on failure. + */ +int dbg_check_lpt_nodes(struct ubifs_info *c, struct ubifs_cnode *cnode, + int row, int col) +{ + struct ubifs_nnode *nnode, *nn; + struct ubifs_cnode *cn; + int num, iip = 0, err; + + if (!(ubifs_chk_flags & UBIFS_CHK_LPROPS)) + return 0; + + while (cnode) { + ubifs_assert(row >= 0); + nnode = cnode->parent; + if (cnode->level) { + /* cnode is a nnode */ + num = calc_nnode_num(row, col); + if (cnode->num != num) { + dbg_err("nnode num %d expected %d " + "parent num %d iip %d", cnode->num, num, + (nnode ? nnode->num : 0), cnode->iip); + return -EINVAL; + } + nn = (struct ubifs_nnode *)cnode; + while (iip < UBIFS_LPT_FANOUT) { + cn = nn->nbranch[iip].cnode; + if (cn) { + /* Go down */ + row += 1; + col <<= UBIFS_LPT_FANOUT_SHIFT; + col += iip; + iip = 0; + cnode = cn; + break; + } + /* Go right */ + iip += 1; + } + if (iip < UBIFS_LPT_FANOUT) + continue; + } else { + struct ubifs_pnode *pnode; + + /* cnode is a pnode */ + pnode = (struct ubifs_pnode *)cnode; + err = dbg_chk_pnode(c, pnode, col); + if (err) + return err; + } + /* Go up and to the right */ + row -= 1; + col >>= UBIFS_LPT_FANOUT_SHIFT; + iip = cnode->iip + 1; + cnode = (struct ubifs_cnode *)nnode; + } + return 0; +} + +#endif /* CONFIG_UBIFS_FS_DEBUG */ diff --git a/fs/ubifs/lpt_commit.c b/fs/ubifs/lpt_commit.c new file mode 100644 index 000000000000..5f0b83e20af6 --- /dev/null +++ b/fs/ubifs/lpt_commit.c @@ -0,0 +1,1648 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Adrian Hunter + * Artem Bityutskiy (Битюцкий Артём) + */ + +/* + * This file implements commit-related functionality of the LEB properties + * subsystem. + */ + +#include +#include "ubifs.h" + +/** + * first_dirty_cnode - find first dirty cnode. + * @c: UBIFS file-system description object + * @nnode: nnode at which to start + * + * This function returns the first dirty cnode or %NULL if there is not one. + */ +static struct ubifs_cnode *first_dirty_cnode(struct ubifs_nnode *nnode) +{ + ubifs_assert(nnode); + while (1) { + int i, cont = 0; + + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + struct ubifs_cnode *cnode; + + cnode = nnode->nbranch[i].cnode; + if (cnode && + test_bit(DIRTY_CNODE, &cnode->flags)) { + if (cnode->level == 0) + return cnode; + nnode = (struct ubifs_nnode *)cnode; + cont = 1; + break; + } + } + if (!cont) + return (struct ubifs_cnode *)nnode; + } +} + +/** + * next_dirty_cnode - find next dirty cnode. + * @cnode: cnode from which to begin searching + * + * This function returns the next dirty cnode or %NULL if there is not one. + */ +static struct ubifs_cnode *next_dirty_cnode(struct ubifs_cnode *cnode) +{ + struct ubifs_nnode *nnode; + int i; + + ubifs_assert(cnode); + nnode = cnode->parent; + if (!nnode) + return NULL; + for (i = cnode->iip + 1; i < UBIFS_LPT_FANOUT; i++) { + cnode = nnode->nbranch[i].cnode; + if (cnode && test_bit(DIRTY_CNODE, &cnode->flags)) { + if (cnode->level == 0) + return cnode; /* cnode is a pnode */ + /* cnode is a nnode */ + return first_dirty_cnode((struct ubifs_nnode *)cnode); + } + } + return (struct ubifs_cnode *)nnode; +} + +/** + * get_cnodes_to_commit - create list of dirty cnodes to commit. + * @c: UBIFS file-system description object + * + * This function returns the number of cnodes to commit. + */ +static int get_cnodes_to_commit(struct ubifs_info *c) +{ + struct ubifs_cnode *cnode, *cnext; + int cnt = 0; + + if (!c->nroot) + return 0; + + if (!test_bit(DIRTY_CNODE, &c->nroot->flags)) + return 0; + + c->lpt_cnext = first_dirty_cnode(c->nroot); + cnode = c->lpt_cnext; + if (!cnode) + return 0; + cnt += 1; + while (1) { + ubifs_assert(!test_bit(COW_ZNODE, &cnode->flags)); + __set_bit(COW_ZNODE, &cnode->flags); + cnext = next_dirty_cnode(cnode); + if (!cnext) { + cnode->cnext = c->lpt_cnext; + break; + } + cnode->cnext = cnext; + cnode = cnext; + cnt += 1; + } + dbg_cmt("committing %d cnodes", cnt); + dbg_lp("committing %d cnodes", cnt); + ubifs_assert(cnt == c->dirty_nn_cnt + c->dirty_pn_cnt); + return cnt; +} + +/** + * upd_ltab - update LPT LEB properties. + * @c: UBIFS file-system description object + * @lnum: LEB number + * @free: amount of free space + * @dirty: amount of dirty space to add + */ +static void upd_ltab(struct ubifs_info *c, int lnum, int free, int dirty) +{ + dbg_lp("LEB %d free %d dirty %d to %d +%d", + lnum, c->ltab[lnum - c->lpt_first].free, + c->ltab[lnum - c->lpt_first].dirty, free, dirty); + ubifs_assert(lnum >= c->lpt_first && lnum <= c->lpt_last); + c->ltab[lnum - c->lpt_first].free = free; + c->ltab[lnum - c->lpt_first].dirty += dirty; +} + +/** + * alloc_lpt_leb - allocate an LPT LEB that is empty. + * @c: UBIFS file-system description object + * @lnum: LEB number is passed and returned here + * + * This function finds the next empty LEB in the ltab starting from @lnum. If a + * an empty LEB is found it is returned in @lnum and the function returns %0. + * Otherwise the function returns -ENOSPC. Note however, that LPT is designed + * never to run out of space. + */ +static int alloc_lpt_leb(struct ubifs_info *c, int *lnum) +{ + int i, n; + + n = *lnum - c->lpt_first + 1; + for (i = n; i < c->lpt_lebs; i++) { + if (c->ltab[i].tgc || c->ltab[i].cmt) + continue; + if (c->ltab[i].free == c->leb_size) { + c->ltab[i].cmt = 1; + *lnum = i + c->lpt_first; + return 0; + } + } + + for (i = 0; i < n; i++) { + if (c->ltab[i].tgc || c->ltab[i].cmt) + continue; + if (c->ltab[i].free == c->leb_size) { + c->ltab[i].cmt = 1; + *lnum = i + c->lpt_first; + return 0; + } + } + dbg_err("last LEB %d", *lnum); + dump_stack(); + return -ENOSPC; +} + +/** + * layout_cnodes - layout cnodes for commit. + * @c: UBIFS file-system description object + * + * This function returns %0 on success and a negative error code on failure. + */ +static int layout_cnodes(struct ubifs_info *c) +{ + int lnum, offs, len, alen, done_lsave, done_ltab, err; + struct ubifs_cnode *cnode; + + cnode = c->lpt_cnext; + if (!cnode) + return 0; + lnum = c->nhead_lnum; + offs = c->nhead_offs; + /* Try to place lsave and ltab nicely */ + done_lsave = !c->big_lpt; + done_ltab = 0; + if (!done_lsave && offs + c->lsave_sz <= c->leb_size) { + done_lsave = 1; + c->lsave_lnum = lnum; + c->lsave_offs = offs; + offs += c->lsave_sz; + } + + if (offs + c->ltab_sz <= c->leb_size) { + done_ltab = 1; + c->ltab_lnum = lnum; + c->ltab_offs = offs; + offs += c->ltab_sz; + } + + do { + if (cnode->level) { + len = c->nnode_sz; + c->dirty_nn_cnt -= 1; + } else { + len = c->pnode_sz; + c->dirty_pn_cnt -= 1; + } + while (offs + len > c->leb_size) { + alen = ALIGN(offs, c->min_io_size); + upd_ltab(c, lnum, c->leb_size - alen, alen - offs); + err = alloc_lpt_leb(c, &lnum); + if (err) + return err; + offs = 0; + ubifs_assert(lnum >= c->lpt_first && + lnum <= c->lpt_last); + /* Try to place lsave and ltab nicely */ + if (!done_lsave) { + done_lsave = 1; + c->lsave_lnum = lnum; + c->lsave_offs = offs; + offs += c->lsave_sz; + continue; + } + if (!done_ltab) { + done_ltab = 1; + c->ltab_lnum = lnum; + c->ltab_offs = offs; + offs += c->ltab_sz; + continue; + } + break; + } + if (cnode->parent) { + cnode->parent->nbranch[cnode->iip].lnum = lnum; + cnode->parent->nbranch[cnode->iip].offs = offs; + } else { + c->lpt_lnum = lnum; + c->lpt_offs = offs; + } + offs += len; + cnode = cnode->cnext; + } while (cnode && cnode != c->lpt_cnext); + + /* Make sure to place LPT's save table */ + if (!done_lsave) { + if (offs + c->lsave_sz > c->leb_size) { + alen = ALIGN(offs, c->min_io_size); + upd_ltab(c, lnum, c->leb_size - alen, alen - offs); + err = alloc_lpt_leb(c, &lnum); + if (err) + return err; + offs = 0; + ubifs_assert(lnum >= c->lpt_first && + lnum <= c->lpt_last); + } + done_lsave = 1; + c->lsave_lnum = lnum; + c->lsave_offs = offs; + offs += c->lsave_sz; + } + + /* Make sure to place LPT's own lprops table */ + if (!done_ltab) { + if (offs + c->ltab_sz > c->leb_size) { + alen = ALIGN(offs, c->min_io_size); + upd_ltab(c, lnum, c->leb_size - alen, alen - offs); + err = alloc_lpt_leb(c, &lnum); + if (err) + return err; + offs = 0; + ubifs_assert(lnum >= c->lpt_first && + lnum <= c->lpt_last); + } + done_ltab = 1; + c->ltab_lnum = lnum; + c->ltab_offs = offs; + offs += c->ltab_sz; + } + + alen = ALIGN(offs, c->min_io_size); + upd_ltab(c, lnum, c->leb_size - alen, alen - offs); + return 0; +} + +/** + * realloc_lpt_leb - allocate an LPT LEB that is empty. + * @c: UBIFS file-system description object + * @lnum: LEB number is passed and returned here + * + * This function duplicates exactly the results of the function alloc_lpt_leb. + * It is used during end commit to reallocate the same LEB numbers that were + * allocated by alloc_lpt_leb during start commit. + * + * This function finds the next LEB that was allocated by the alloc_lpt_leb + * function starting from @lnum. If a LEB is found it is returned in @lnum and + * the function returns %0. Otherwise the function returns -ENOSPC. + * Note however, that LPT is designed never to run out of space. + */ +static int realloc_lpt_leb(struct ubifs_info *c, int *lnum) +{ + int i, n; + + n = *lnum - c->lpt_first + 1; + for (i = n; i < c->lpt_lebs; i++) + if (c->ltab[i].cmt) { + c->ltab[i].cmt = 0; + *lnum = i + c->lpt_first; + return 0; + } + + for (i = 0; i < n; i++) + if (c->ltab[i].cmt) { + c->ltab[i].cmt = 0; + *lnum = i + c->lpt_first; + return 0; + } + dbg_err("last LEB %d", *lnum); + dump_stack(); + return -ENOSPC; +} + +/** + * write_cnodes - write cnodes for commit. + * @c: UBIFS file-system description object + * + * This function returns %0 on success and a negative error code on failure. + */ +static int write_cnodes(struct ubifs_info *c) +{ + int lnum, offs, len, from, err, wlen, alen, done_ltab, done_lsave; + struct ubifs_cnode *cnode; + void *buf = c->lpt_buf; + + cnode = c->lpt_cnext; + if (!cnode) + return 0; + lnum = c->nhead_lnum; + offs = c->nhead_offs; + from = offs; + /* Ensure empty LEB is unmapped */ + if (offs == 0) { + err = ubifs_leb_unmap(c, lnum); + if (err) + return err; + } + /* Try to place lsave and ltab nicely */ + done_lsave = !c->big_lpt; + done_ltab = 0; + if (!done_lsave && offs + c->lsave_sz <= c->leb_size) { + done_lsave = 1; + ubifs_pack_lsave(c, buf + offs, c->lsave); + offs += c->lsave_sz; + } + + if (offs + c->ltab_sz <= c->leb_size) { + done_ltab = 1; + ubifs_pack_ltab(c, buf + offs, c->ltab_cmt); + offs += c->ltab_sz; + } + + /* Loop for each cnode */ + do { + if (cnode->level) + len = c->nnode_sz; + else + len = c->pnode_sz; + while (offs + len > c->leb_size) { + wlen = offs - from; + if (wlen) { + alen = ALIGN(wlen, c->min_io_size); + memset(buf + offs, 0xff, alen - wlen); + err = ubifs_leb_write(c, lnum, buf + from, from, + alen, UBI_SHORTTERM); + if (err) + return err; + } + err = realloc_lpt_leb(c, &lnum); + if (err) + return err; + offs = 0; + from = 0; + ubifs_assert(lnum >= c->lpt_first && + lnum <= c->lpt_last); + err = ubifs_leb_unmap(c, lnum); + if (err) + return err; + /* Try to place lsave and ltab nicely */ + if (!done_lsave) { + done_lsave = 1; + ubifs_pack_lsave(c, buf + offs, c->lsave); + offs += c->lsave_sz; + continue; + } + if (!done_ltab) { + done_ltab = 1; + ubifs_pack_ltab(c, buf + offs, c->ltab_cmt); + offs += c->ltab_sz; + continue; + } + break; + } + if (cnode->level) + ubifs_pack_nnode(c, buf + offs, + (struct ubifs_nnode *)cnode); + else + ubifs_pack_pnode(c, buf + offs, + (struct ubifs_pnode *)cnode); + /* + * The reason for the barriers is the same as in case of TNC. + * See comment in 'write_index()'. 'dirty_cow_nnode()' and + * 'dirty_cow_pnode()' are the functions for which this is + * important. + */ + clear_bit(DIRTY_CNODE, &cnode->flags); + smp_mb__before_clear_bit(); + clear_bit(COW_ZNODE, &cnode->flags); + smp_mb__after_clear_bit(); + offs += len; + cnode = cnode->cnext; + } while (cnode && cnode != c->lpt_cnext); + + /* Make sure to place LPT's save table */ + if (!done_lsave) { + if (offs + c->lsave_sz > c->leb_size) { + wlen = offs - from; + alen = ALIGN(wlen, c->min_io_size); + memset(buf + offs, 0xff, alen - wlen); + err = ubifs_leb_write(c, lnum, buf + from, from, alen, + UBI_SHORTTERM); + if (err) + return err; + err = realloc_lpt_leb(c, &lnum); + if (err) + return err; + offs = 0; + ubifs_assert(lnum >= c->lpt_first && + lnum <= c->lpt_last); + err = ubifs_leb_unmap(c, lnum); + if (err) + return err; + } + done_lsave = 1; + ubifs_pack_lsave(c, buf + offs, c->lsave); + offs += c->lsave_sz; + } + + /* Make sure to place LPT's own lprops table */ + if (!done_ltab) { + if (offs + c->ltab_sz > c->leb_size) { + wlen = offs - from; + alen = ALIGN(wlen, c->min_io_size); + memset(buf + offs, 0xff, alen - wlen); + err = ubifs_leb_write(c, lnum, buf + from, from, alen, + UBI_SHORTTERM); + if (err) + return err; + err = realloc_lpt_leb(c, &lnum); + if (err) + return err; + offs = 0; + ubifs_assert(lnum >= c->lpt_first && + lnum <= c->lpt_last); + err = ubifs_leb_unmap(c, lnum); + if (err) + return err; + } + done_ltab = 1; + ubifs_pack_ltab(c, buf + offs, c->ltab_cmt); + offs += c->ltab_sz; + } + + /* Write remaining data in buffer */ + wlen = offs - from; + alen = ALIGN(wlen, c->min_io_size); + memset(buf + offs, 0xff, alen - wlen); + err = ubifs_leb_write(c, lnum, buf + from, from, alen, UBI_SHORTTERM); + if (err) + return err; + c->nhead_lnum = lnum; + c->nhead_offs = ALIGN(offs, c->min_io_size); + + dbg_lp("LPT root is at %d:%d", c->lpt_lnum, c->lpt_offs); + dbg_lp("LPT head is at %d:%d", c->nhead_lnum, c->nhead_offs); + dbg_lp("LPT ltab is at %d:%d", c->ltab_lnum, c->ltab_offs); + if (c->big_lpt) + dbg_lp("LPT lsave is at %d:%d", c->lsave_lnum, c->lsave_offs); + return 0; +} + +/** + * next_pnode - find next pnode. + * @c: UBIFS file-system description object + * @pnode: pnode + * + * This function returns the next pnode or %NULL if there are no more pnodes. + */ +static struct ubifs_pnode *next_pnode(struct ubifs_info *c, + struct ubifs_pnode *pnode) +{ + struct ubifs_nnode *nnode; + int iip; + + /* Try to go right */ + nnode = pnode->parent; + iip = pnode->iip + 1; + if (iip < UBIFS_LPT_FANOUT) { + /* We assume here that LEB zero is never an LPT LEB */ + if (nnode->nbranch[iip].lnum) + return ubifs_get_pnode(c, nnode, iip); + else + return NULL; + } + + /* Go up while can't go right */ + do { + iip = nnode->iip + 1; + nnode = nnode->parent; + if (!nnode) + return NULL; + /* We assume here that LEB zero is never an LPT LEB */ + } while (iip >= UBIFS_LPT_FANOUT || !nnode->nbranch[iip].lnum); + + /* Go right */ + nnode = ubifs_get_nnode(c, nnode, iip); + if (IS_ERR(nnode)) + return (void *)nnode; + + /* Go down to level 1 */ + while (nnode->level > 1) { + nnode = ubifs_get_nnode(c, nnode, 0); + if (IS_ERR(nnode)) + return (void *)nnode; + } + + return ubifs_get_pnode(c, nnode, 0); +} + +/** + * pnode_lookup - lookup a pnode in the LPT. + * @c: UBIFS file-system description object + * @i: pnode number (0 to main_lebs - 1) + * + * This function returns a pointer to the pnode on success or a negative + * error code on failure. + */ +static struct ubifs_pnode *pnode_lookup(struct ubifs_info *c, int i) +{ + int err, h, iip, shft; + struct ubifs_nnode *nnode; + + if (!c->nroot) { + err = ubifs_read_nnode(c, NULL, 0); + if (err) + return ERR_PTR(err); + } + i <<= UBIFS_LPT_FANOUT_SHIFT; + nnode = c->nroot; + shft = c->lpt_hght * UBIFS_LPT_FANOUT_SHIFT; + for (h = 1; h < c->lpt_hght; h++) { + iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1)); + shft -= UBIFS_LPT_FANOUT_SHIFT; + nnode = ubifs_get_nnode(c, nnode, iip); + if (IS_ERR(nnode)) + return ERR_PTR(PTR_ERR(nnode)); + } + iip = ((i >> shft) & (UBIFS_LPT_FANOUT - 1)); + return ubifs_get_pnode(c, nnode, iip); +} + +/** + * add_pnode_dirt - add dirty space to LPT LEB properties. + * @c: UBIFS file-system description object + * @pnode: pnode for which to add dirt + */ +static void add_pnode_dirt(struct ubifs_info *c, struct ubifs_pnode *pnode) +{ + ubifs_add_lpt_dirt(c, pnode->parent->nbranch[pnode->iip].lnum, + c->pnode_sz); +} + +/** + * do_make_pnode_dirty - mark a pnode dirty. + * @c: UBIFS file-system description object + * @pnode: pnode to mark dirty + */ +static void do_make_pnode_dirty(struct ubifs_info *c, struct ubifs_pnode *pnode) +{ + /* Assumes cnext list is empty i.e. not called during commit */ + if (!test_and_set_bit(DIRTY_CNODE, &pnode->flags)) { + struct ubifs_nnode *nnode; + + c->dirty_pn_cnt += 1; + add_pnode_dirt(c, pnode); + /* Mark parent and ancestors dirty too */ + nnode = pnode->parent; + while (nnode) { + if (!test_and_set_bit(DIRTY_CNODE, &nnode->flags)) { + c->dirty_nn_cnt += 1; + ubifs_add_nnode_dirt(c, nnode); + nnode = nnode->parent; + } else + break; + } + } +} + +/** + * make_tree_dirty - mark the entire LEB properties tree dirty. + * @c: UBIFS file-system description object + * + * This function is used by the "small" LPT model to cause the entire LEB + * properties tree to be written. The "small" LPT model does not use LPT + * garbage collection because it is more efficient to write the entire tree + * (because it is small). + * + * This function returns %0 on success and a negative error code on failure. + */ +static int make_tree_dirty(struct ubifs_info *c) +{ + struct ubifs_pnode *pnode; + + pnode = pnode_lookup(c, 0); + while (pnode) { + do_make_pnode_dirty(c, pnode); + pnode = next_pnode(c, pnode); + if (IS_ERR(pnode)) + return PTR_ERR(pnode); + } + return 0; +} + +/** + * need_write_all - determine if the LPT area is running out of free space. + * @c: UBIFS file-system description object + * + * This function returns %1 if the LPT area is running out of free space and %0 + * if it is not. + */ +static int need_write_all(struct ubifs_info *c) +{ + long long free = 0; + int i; + + for (i = 0; i < c->lpt_lebs; i++) { + if (i + c->lpt_first == c->nhead_lnum) + free += c->leb_size - c->nhead_offs; + else if (c->ltab[i].free == c->leb_size) + free += c->leb_size; + else if (c->ltab[i].free + c->ltab[i].dirty == c->leb_size) + free += c->leb_size; + } + /* Less than twice the size left */ + if (free <= c->lpt_sz * 2) + return 1; + return 0; +} + +/** + * lpt_tgc_start - start trivial garbage collection of LPT LEBs. + * @c: UBIFS file-system description object + * + * LPT trivial garbage collection is where a LPT LEB contains only dirty and + * free space and so may be reused as soon as the next commit is completed. + * This function is called during start commit to mark LPT LEBs for trivial GC. + */ +static void lpt_tgc_start(struct ubifs_info *c) +{ + int i; + + for (i = 0; i < c->lpt_lebs; i++) { + if (i + c->lpt_first == c->nhead_lnum) + continue; + if (c->ltab[i].dirty > 0 && + c->ltab[i].free + c->ltab[i].dirty == c->leb_size) { + c->ltab[i].tgc = 1; + c->ltab[i].free = c->leb_size; + c->ltab[i].dirty = 0; + dbg_lp("LEB %d", i + c->lpt_first); + } + } +} + +/** + * lpt_tgc_end - end trivial garbage collection of LPT LEBs. + * @c: UBIFS file-system description object + * + * LPT trivial garbage collection is where a LPT LEB contains only dirty and + * free space and so may be reused as soon as the next commit is completed. + * This function is called after the commit is completed (master node has been + * written) and unmaps LPT LEBs that were marked for trivial GC. + */ +static int lpt_tgc_end(struct ubifs_info *c) +{ + int i, err; + + for (i = 0; i < c->lpt_lebs; i++) + if (c->ltab[i].tgc) { + err = ubifs_leb_unmap(c, i + c->lpt_first); + if (err) + return err; + c->ltab[i].tgc = 0; + dbg_lp("LEB %d", i + c->lpt_first); + } + return 0; +} + +/** + * populate_lsave - fill the lsave array with important LEB numbers. + * @c: the UBIFS file-system description object + * + * This function is only called for the "big" model. It records a small number + * of LEB numbers of important LEBs. Important LEBs are ones that are (from + * most important to least important): empty, freeable, freeable index, dirty + * index, dirty or free. Upon mount, we read this list of LEB numbers and bring + * their pnodes into memory. That will stop us from having to scan the LPT + * straight away. For the "small" model we assume that scanning the LPT is no + * big deal. + */ +static void populate_lsave(struct ubifs_info *c) +{ + struct ubifs_lprops *lprops; + struct ubifs_lpt_heap *heap; + int i, cnt = 0; + + ubifs_assert(c->big_lpt); + if (!(c->lpt_drty_flgs & LSAVE_DIRTY)) { + c->lpt_drty_flgs |= LSAVE_DIRTY; + ubifs_add_lpt_dirt(c, c->lsave_lnum, c->lsave_sz); + } + list_for_each_entry(lprops, &c->empty_list, list) { + c->lsave[cnt++] = lprops->lnum; + if (cnt >= c->lsave_cnt) + return; + } + list_for_each_entry(lprops, &c->freeable_list, list) { + c->lsave[cnt++] = lprops->lnum; + if (cnt >= c->lsave_cnt) + return; + } + list_for_each_entry(lprops, &c->frdi_idx_list, list) { + c->lsave[cnt++] = lprops->lnum; + if (cnt >= c->lsave_cnt) + return; + } + heap = &c->lpt_heap[LPROPS_DIRTY_IDX - 1]; + for (i = 0; i < heap->cnt; i++) { + c->lsave[cnt++] = heap->arr[i]->lnum; + if (cnt >= c->lsave_cnt) + return; + } + heap = &c->lpt_heap[LPROPS_DIRTY - 1]; + for (i = 0; i < heap->cnt; i++) { + c->lsave[cnt++] = heap->arr[i]->lnum; + if (cnt >= c->lsave_cnt) + return; + } + heap = &c->lpt_heap[LPROPS_FREE - 1]; + for (i = 0; i < heap->cnt; i++) { + c->lsave[cnt++] = heap->arr[i]->lnum; + if (cnt >= c->lsave_cnt) + return; + } + /* Fill it up completely */ + while (cnt < c->lsave_cnt) + c->lsave[cnt++] = c->main_first; +} + +/** + * nnode_lookup - lookup a nnode in the LPT. + * @c: UBIFS file-system description object + * @i: nnode number + * + * This function returns a pointer to the nnode on success or a negative + * error code on failure. + */ +static struct ubifs_nnode *nnode_lookup(struct ubifs_info *c, int i) +{ + int err, iip; + struct ubifs_nnode *nnode; + + if (!c->nroot) { + err = ubifs_read_nnode(c, NULL, 0); + if (err) + return ERR_PTR(err); + } + nnode = c->nroot; + while (1) { + iip = i & (UBIFS_LPT_FANOUT - 1); + i >>= UBIFS_LPT_FANOUT_SHIFT; + if (!i) + break; + nnode = ubifs_get_nnode(c, nnode, iip); + if (IS_ERR(nnode)) + return nnode; + } + return nnode; +} + +/** + * make_nnode_dirty - find a nnode and, if found, make it dirty. + * @c: UBIFS file-system description object + * @node_num: nnode number of nnode to make dirty + * @lnum: LEB number where nnode was written + * @offs: offset where nnode was written + * + * This function is used by LPT garbage collection. LPT garbage collection is + * used only for the "big" LPT model (c->big_lpt == 1). Garbage collection + * simply involves marking all the nodes in the LEB being garbage-collected as + * dirty. The dirty nodes are written next commit, after which the LEB is free + * to be reused. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int make_nnode_dirty(struct ubifs_info *c, int node_num, int lnum, + int offs) +{ + struct ubifs_nnode *nnode; + + nnode = nnode_lookup(c, node_num); + if (IS_ERR(nnode)) + return PTR_ERR(nnode); + if (nnode->parent) { + struct ubifs_nbranch *branch; + + branch = &nnode->parent->nbranch[nnode->iip]; + if (branch->lnum != lnum || branch->offs != offs) + return 0; /* nnode is obsolete */ + } else if (c->lpt_lnum != lnum || c->lpt_offs != offs) + return 0; /* nnode is obsolete */ + /* Assumes cnext list is empty i.e. not called during commit */ + if (!test_and_set_bit(DIRTY_CNODE, &nnode->flags)) { + c->dirty_nn_cnt += 1; + ubifs_add_nnode_dirt(c, nnode); + /* Mark parent and ancestors dirty too */ + nnode = nnode->parent; + while (nnode) { + if (!test_and_set_bit(DIRTY_CNODE, &nnode->flags)) { + c->dirty_nn_cnt += 1; + ubifs_add_nnode_dirt(c, nnode); + nnode = nnode->parent; + } else + break; + } + } + return 0; +} + +/** + * make_pnode_dirty - find a pnode and, if found, make it dirty. + * @c: UBIFS file-system description object + * @node_num: pnode number of pnode to make dirty + * @lnum: LEB number where pnode was written + * @offs: offset where pnode was written + * + * This function is used by LPT garbage collection. LPT garbage collection is + * used only for the "big" LPT model (c->big_lpt == 1). Garbage collection + * simply involves marking all the nodes in the LEB being garbage-collected as + * dirty. The dirty nodes are written next commit, after which the LEB is free + * to be reused. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int make_pnode_dirty(struct ubifs_info *c, int node_num, int lnum, + int offs) +{ + struct ubifs_pnode *pnode; + struct ubifs_nbranch *branch; + + pnode = pnode_lookup(c, node_num); + if (IS_ERR(pnode)) + return PTR_ERR(pnode); + branch = &pnode->parent->nbranch[pnode->iip]; + if (branch->lnum != lnum || branch->offs != offs) + return 0; + do_make_pnode_dirty(c, pnode); + return 0; +} + +/** + * make_ltab_dirty - make ltab node dirty. + * @c: UBIFS file-system description object + * @lnum: LEB number where ltab was written + * @offs: offset where ltab was written + * + * This function is used by LPT garbage collection. LPT garbage collection is + * used only for the "big" LPT model (c->big_lpt == 1). Garbage collection + * simply involves marking all the nodes in the LEB being garbage-collected as + * dirty. The dirty nodes are written next commit, after which the LEB is free + * to be reused. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int make_ltab_dirty(struct ubifs_info *c, int lnum, int offs) +{ + if (lnum != c->ltab_lnum || offs != c->ltab_offs) + return 0; /* This ltab node is obsolete */ + if (!(c->lpt_drty_flgs & LTAB_DIRTY)) { + c->lpt_drty_flgs |= LTAB_DIRTY; + ubifs_add_lpt_dirt(c, c->ltab_lnum, c->ltab_sz); + } + return 0; +} + +/** + * make_lsave_dirty - make lsave node dirty. + * @c: UBIFS file-system description object + * @lnum: LEB number where lsave was written + * @offs: offset where lsave was written + * + * This function is used by LPT garbage collection. LPT garbage collection is + * used only for the "big" LPT model (c->big_lpt == 1). Garbage collection + * simply involves marking all the nodes in the LEB being garbage-collected as + * dirty. The dirty nodes are written next commit, after which the LEB is free + * to be reused. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int make_lsave_dirty(struct ubifs_info *c, int lnum, int offs) +{ + if (lnum != c->lsave_lnum || offs != c->lsave_offs) + return 0; /* This lsave node is obsolete */ + if (!(c->lpt_drty_flgs & LSAVE_DIRTY)) { + c->lpt_drty_flgs |= LSAVE_DIRTY; + ubifs_add_lpt_dirt(c, c->lsave_lnum, c->lsave_sz); + } + return 0; +} + +/** + * make_node_dirty - make node dirty. + * @c: UBIFS file-system description object + * @node_type: LPT node type + * @node_num: node number + * @lnum: LEB number where node was written + * @offs: offset where node was written + * + * This function is used by LPT garbage collection. LPT garbage collection is + * used only for the "big" LPT model (c->big_lpt == 1). Garbage collection + * simply involves marking all the nodes in the LEB being garbage-collected as + * dirty. The dirty nodes are written next commit, after which the LEB is free + * to be reused. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int make_node_dirty(struct ubifs_info *c, int node_type, int node_num, + int lnum, int offs) +{ + switch (node_type) { + case UBIFS_LPT_NNODE: + return make_nnode_dirty(c, node_num, lnum, offs); + case UBIFS_LPT_PNODE: + return make_pnode_dirty(c, node_num, lnum, offs); + case UBIFS_LPT_LTAB: + return make_ltab_dirty(c, lnum, offs); + case UBIFS_LPT_LSAVE: + return make_lsave_dirty(c, lnum, offs); + } + return -EINVAL; +} + +/** + * get_lpt_node_len - return the length of a node based on its type. + * @c: UBIFS file-system description object + * @node_type: LPT node type + */ +static int get_lpt_node_len(struct ubifs_info *c, int node_type) +{ + switch (node_type) { + case UBIFS_LPT_NNODE: + return c->nnode_sz; + case UBIFS_LPT_PNODE: + return c->pnode_sz; + case UBIFS_LPT_LTAB: + return c->ltab_sz; + case UBIFS_LPT_LSAVE: + return c->lsave_sz; + } + return 0; +} + +/** + * get_pad_len - return the length of padding in a buffer. + * @c: UBIFS file-system description object + * @buf: buffer + * @len: length of buffer + */ +static int get_pad_len(struct ubifs_info *c, uint8_t *buf, int len) +{ + int offs, pad_len; + + if (c->min_io_size == 1) + return 0; + offs = c->leb_size - len; + pad_len = ALIGN(offs, c->min_io_size) - offs; + return pad_len; +} + +/** + * get_lpt_node_type - return type (and node number) of a node in a buffer. + * @c: UBIFS file-system description object + * @buf: buffer + * @node_num: node number is returned here + */ +static int get_lpt_node_type(struct ubifs_info *c, uint8_t *buf, int *node_num) +{ + uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES; + int pos = 0, node_type; + + node_type = ubifs_unpack_bits(&addr, &pos, UBIFS_LPT_TYPE_BITS); + *node_num = ubifs_unpack_bits(&addr, &pos, c->pcnt_bits); + return node_type; +} + +/** + * is_a_node - determine if a buffer contains a node. + * @c: UBIFS file-system description object + * @buf: buffer + * @len: length of buffer + * + * This function returns %1 if the buffer contains a node or %0 if it does not. + */ +static int is_a_node(struct ubifs_info *c, uint8_t *buf, int len) +{ + uint8_t *addr = buf + UBIFS_LPT_CRC_BYTES; + int pos = 0, node_type, node_len; + uint16_t crc, calc_crc; + + node_type = ubifs_unpack_bits(&addr, &pos, UBIFS_LPT_TYPE_BITS); + if (node_type == UBIFS_LPT_NOT_A_NODE) + return 0; + node_len = get_lpt_node_len(c, node_type); + if (!node_len || node_len > len) + return 0; + pos = 0; + addr = buf; + crc = ubifs_unpack_bits(&addr, &pos, UBIFS_LPT_CRC_BITS); + calc_crc = crc16(-1, buf + UBIFS_LPT_CRC_BYTES, + node_len - UBIFS_LPT_CRC_BYTES); + if (crc != calc_crc) + return 0; + return 1; +} + + +/** + * lpt_gc_lnum - garbage collect a LPT LEB. + * @c: UBIFS file-system description object + * @lnum: LEB number to garbage collect + * + * LPT garbage collection is used only for the "big" LPT model + * (c->big_lpt == 1). Garbage collection simply involves marking all the nodes + * in the LEB being garbage-collected as dirty. The dirty nodes are written + * next commit, after which the LEB is free to be reused. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int lpt_gc_lnum(struct ubifs_info *c, int lnum) +{ + int err, len = c->leb_size, node_type, node_num, node_len, offs; + void *buf = c->lpt_buf; + + dbg_lp("LEB %d", lnum); + err = ubi_read(c->ubi, lnum, buf, 0, c->leb_size); + if (err) { + ubifs_err("cannot read LEB %d, error %d", lnum, err); + return err; + } + while (1) { + if (!is_a_node(c, buf, len)) { + int pad_len; + + pad_len = get_pad_len(c, buf, len); + if (pad_len) { + buf += pad_len; + len -= pad_len; + continue; + } + return 0; + } + node_type = get_lpt_node_type(c, buf, &node_num); + node_len = get_lpt_node_len(c, node_type); + offs = c->leb_size - len; + ubifs_assert(node_len != 0); + mutex_lock(&c->lp_mutex); + err = make_node_dirty(c, node_type, node_num, lnum, offs); + mutex_unlock(&c->lp_mutex); + if (err) + return err; + buf += node_len; + len -= node_len; + } + return 0; +} + +/** + * lpt_gc - LPT garbage collection. + * @c: UBIFS file-system description object + * + * Select a LPT LEB for LPT garbage collection and call 'lpt_gc_lnum()'. + * Returns %0 on success and a negative error code on failure. + */ +static int lpt_gc(struct ubifs_info *c) +{ + int i, lnum = -1, dirty = 0; + + mutex_lock(&c->lp_mutex); + for (i = 0; i < c->lpt_lebs; i++) { + ubifs_assert(!c->ltab[i].tgc); + if (i + c->lpt_first == c->nhead_lnum || + c->ltab[i].free + c->ltab[i].dirty == c->leb_size) + continue; + if (c->ltab[i].dirty > dirty) { + dirty = c->ltab[i].dirty; + lnum = i + c->lpt_first; + } + } + mutex_unlock(&c->lp_mutex); + if (lnum == -1) + return -ENOSPC; + return lpt_gc_lnum(c, lnum); +} + +/** + * ubifs_lpt_start_commit - UBIFS commit starts. + * @c: the UBIFS file-system description object + * + * This function has to be called when UBIFS starts the commit operation. + * This function "freezes" all currently dirty LEB properties and does not + * change them anymore. Further changes are saved and tracked separately + * because they are not part of this commit. This function returns zero in case + * of success and a negative error code in case of failure. + */ +int ubifs_lpt_start_commit(struct ubifs_info *c) +{ + int err, cnt; + + dbg_lp(""); + + mutex_lock(&c->lp_mutex); + err = dbg_check_ltab(c); + if (err) + goto out; + + if (c->check_lpt_free) { + /* + * We ensure there is enough free space in + * ubifs_lpt_post_commit() by marking nodes dirty. That + * information is lost when we unmount, so we also need + * to check free space once after mounting also. + */ + c->check_lpt_free = 0; + while (need_write_all(c)) { + mutex_unlock(&c->lp_mutex); + err = lpt_gc(c); + if (err) + return err; + mutex_lock(&c->lp_mutex); + } + } + + lpt_tgc_start(c); + + if (!c->dirty_pn_cnt) { + dbg_cmt("no cnodes to commit"); + err = 0; + goto out; + } + + if (!c->big_lpt && need_write_all(c)) { + /* If needed, write everything */ + err = make_tree_dirty(c); + if (err) + goto out; + lpt_tgc_start(c); + } + + if (c->big_lpt) + populate_lsave(c); + + cnt = get_cnodes_to_commit(c); + ubifs_assert(cnt != 0); + + err = layout_cnodes(c); + if (err) + goto out; + + /* Copy the LPT's own lprops for end commit to write */ + memcpy(c->ltab_cmt, c->ltab, + sizeof(struct ubifs_lpt_lprops) * c->lpt_lebs); + c->lpt_drty_flgs &= ~(LTAB_DIRTY | LSAVE_DIRTY); + +out: + mutex_unlock(&c->lp_mutex); + return err; +} + +/** + * free_obsolete_cnodes - free obsolete cnodes for commit end. + * @c: UBIFS file-system description object + */ +static void free_obsolete_cnodes(struct ubifs_info *c) +{ + struct ubifs_cnode *cnode, *cnext; + + cnext = c->lpt_cnext; + if (!cnext) + return; + do { + cnode = cnext; + cnext = cnode->cnext; + if (test_bit(OBSOLETE_CNODE, &cnode->flags)) + kfree(cnode); + else + cnode->cnext = NULL; + } while (cnext != c->lpt_cnext); + c->lpt_cnext = NULL; +} + +/** + * ubifs_lpt_end_commit - finish the commit operation. + * @c: the UBIFS file-system description object + * + * This function has to be called when the commit operation finishes. It + * flushes the changes which were "frozen" by 'ubifs_lprops_start_commit()' to + * the media. Returns zero in case of success and a negative error code in case + * of failure. + */ +int ubifs_lpt_end_commit(struct ubifs_info *c) +{ + int err; + + dbg_lp(""); + + if (!c->lpt_cnext) + return 0; + + err = write_cnodes(c); + if (err) + return err; + + mutex_lock(&c->lp_mutex); + free_obsolete_cnodes(c); + mutex_unlock(&c->lp_mutex); + + return 0; +} + +/** + * ubifs_lpt_post_commit - post commit LPT trivial GC and LPT GC. + * @c: UBIFS file-system description object + * + * LPT trivial GC is completed after a commit. Also LPT GC is done after a + * commit for the "big" LPT model. + */ +int ubifs_lpt_post_commit(struct ubifs_info *c) +{ + int err; + + mutex_lock(&c->lp_mutex); + err = lpt_tgc_end(c); + if (err) + goto out; + if (c->big_lpt) + while (need_write_all(c)) { + mutex_unlock(&c->lp_mutex); + err = lpt_gc(c); + if (err) + return err; + mutex_lock(&c->lp_mutex); + } +out: + mutex_unlock(&c->lp_mutex); + return err; +} + +/** + * first_nnode - find the first nnode in memory. + * @c: UBIFS file-system description object + * @hght: height of tree where nnode found is returned here + * + * This function returns a pointer to the nnode found or %NULL if no nnode is + * found. This function is a helper to 'ubifs_lpt_free()'. + */ +static struct ubifs_nnode *first_nnode(struct ubifs_info *c, int *hght) +{ + struct ubifs_nnode *nnode; + int h, i, found; + + nnode = c->nroot; + *hght = 0; + if (!nnode) + return NULL; + for (h = 1; h < c->lpt_hght; h++) { + found = 0; + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + if (nnode->nbranch[i].nnode) { + found = 1; + nnode = nnode->nbranch[i].nnode; + *hght = h; + break; + } + } + if (!found) + break; + } + return nnode; +} + +/** + * next_nnode - find the next nnode in memory. + * @c: UBIFS file-system description object + * @nnode: nnode from which to start. + * @hght: height of tree where nnode is, is passed and returned here + * + * This function returns a pointer to the nnode found or %NULL if no nnode is + * found. This function is a helper to 'ubifs_lpt_free()'. + */ +static struct ubifs_nnode *next_nnode(struct ubifs_info *c, + struct ubifs_nnode *nnode, int *hght) +{ + struct ubifs_nnode *parent; + int iip, h, i, found; + + parent = nnode->parent; + if (!parent) + return NULL; + if (nnode->iip == UBIFS_LPT_FANOUT - 1) { + *hght -= 1; + return parent; + } + for (iip = nnode->iip + 1; iip < UBIFS_LPT_FANOUT; iip++) { + nnode = parent->nbranch[iip].nnode; + if (nnode) + break; + } + if (!nnode) { + *hght -= 1; + return parent; + } + for (h = *hght + 1; h < c->lpt_hght; h++) { + found = 0; + for (i = 0; i < UBIFS_LPT_FANOUT; i++) { + if (nnode->nbranch[i].nnode) { + found = 1; + nnode = nnode->nbranch[i].nnode; + *hght = h; + break; + } + } + if (!found) + break; + } + return nnode; +} + +/** + * ubifs_lpt_free - free resources owned by the LPT. + * @c: UBIFS file-system description object + * @wr_only: free only resources used for writing + */ +void ubifs_lpt_free(struct ubifs_info *c, int wr_only) +{ + struct ubifs_nnode *nnode; + int i, hght; + + /* Free write-only things first */ + + free_obsolete_cnodes(c); /* Leftover from a failed commit */ + + vfree(c->ltab_cmt); + c->ltab_cmt = NULL; + vfree(c->lpt_buf); + c->lpt_buf = NULL; + kfree(c->lsave); + c->lsave = NULL; + + if (wr_only) + return; + + /* Now free the rest */ + + nnode = first_nnode(c, &hght); + while (nnode) { + for (i = 0; i < UBIFS_LPT_FANOUT; i++) + kfree(nnode->nbranch[i].nnode); + nnode = next_nnode(c, nnode, &hght); + } + for (i = 0; i < LPROPS_HEAP_CNT; i++) + kfree(c->lpt_heap[i].arr); + kfree(c->dirty_idx.arr); + kfree(c->nroot); + vfree(c->ltab); + kfree(c->lpt_nod_buf); +} + +#ifdef CONFIG_UBIFS_FS_DEBUG + +/** + * dbg_is_all_ff - determine if a buffer contains only 0xff bytes. + * @buf: buffer + * @len: buffer length + */ +static int dbg_is_all_ff(uint8_t *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) + if (buf[i] != 0xff) + return 0; + return 1; +} + +/** + * dbg_is_nnode_dirty - determine if a nnode is dirty. + * @c: the UBIFS file-system description object + * @lnum: LEB number where nnode was written + * @offs: offset where nnode was written + */ +static int dbg_is_nnode_dirty(struct ubifs_info *c, int lnum, int offs) +{ + struct ubifs_nnode *nnode; + int hght; + + /* Entire tree is in memory so first_nnode / next_nnode are ok */ + nnode = first_nnode(c, &hght); + for (; nnode; nnode = next_nnode(c, nnode, &hght)) { + struct ubifs_nbranch *branch; + + cond_resched(); + if (nnode->parent) { + branch = &nnode->parent->nbranch[nnode->iip]; + if (branch->lnum != lnum || branch->offs != offs) + continue; + if (test_bit(DIRTY_CNODE, &nnode->flags)) + return 1; + return 0; + } else { + if (c->lpt_lnum != lnum || c->lpt_offs != offs) + continue; + if (test_bit(DIRTY_CNODE, &nnode->flags)) + return 1; + return 0; + } + } + return 1; +} + +/** + * dbg_is_pnode_dirty - determine if a pnode is dirty. + * @c: the UBIFS file-system description object + * @lnum: LEB number where pnode was written + * @offs: offset where pnode was written + */ +static int dbg_is_pnode_dirty(struct ubifs_info *c, int lnum, int offs) +{ + int i, cnt; + + cnt = DIV_ROUND_UP(c->main_lebs, UBIFS_LPT_FANOUT); + for (i = 0; i < cnt; i++) { + struct ubifs_pnode *pnode; + struct ubifs_nbranch *branch; + + cond_resched(); + pnode = pnode_lookup(c, i); + if (IS_ERR(pnode)) + return PTR_ERR(pnode); + branch = &pnode->parent->nbranch[pnode->iip]; + if (branch->lnum != lnum || branch->offs != offs) + continue; + if (test_bit(DIRTY_CNODE, &pnode->flags)) + return 1; + return 0; + } + return 1; +} + +/** + * dbg_is_ltab_dirty - determine if a ltab node is dirty. + * @c: the UBIFS file-system description object + * @lnum: LEB number where ltab node was written + * @offs: offset where ltab node was written + */ +static int dbg_is_ltab_dirty(struct ubifs_info *c, int lnum, int offs) +{ + if (lnum != c->ltab_lnum || offs != c->ltab_offs) + return 1; + return (c->lpt_drty_flgs & LTAB_DIRTY) != 0; +} + +/** + * dbg_is_lsave_dirty - determine if a lsave node is dirty. + * @c: the UBIFS file-system description object + * @lnum: LEB number where lsave node was written + * @offs: offset where lsave node was written + */ +static int dbg_is_lsave_dirty(struct ubifs_info *c, int lnum, int offs) +{ + if (lnum != c->lsave_lnum || offs != c->lsave_offs) + return 1; + return (c->lpt_drty_flgs & LSAVE_DIRTY) != 0; +} + +/** + * dbg_is_node_dirty - determine if a node is dirty. + * @c: the UBIFS file-system description object + * @node_type: node type + * @lnum: LEB number where node was written + * @offs: offset where node was written + */ +static int dbg_is_node_dirty(struct ubifs_info *c, int node_type, int lnum, + int offs) +{ + switch (node_type) { + case UBIFS_LPT_NNODE: + return dbg_is_nnode_dirty(c, lnum, offs); + case UBIFS_LPT_PNODE: + return dbg_is_pnode_dirty(c, lnum, offs); + case UBIFS_LPT_LTAB: + return dbg_is_ltab_dirty(c, lnum, offs); + case UBIFS_LPT_LSAVE: + return dbg_is_lsave_dirty(c, lnum, offs); + } + return 1; +} + +/** + * dbg_check_ltab_lnum - check the ltab for a LPT LEB number. + * @c: the UBIFS file-system description object + * @lnum: LEB number where node was written + * @offs: offset where node was written + * + * This function returns %0 on success and a negative error code on failure. + */ +static int dbg_check_ltab_lnum(struct ubifs_info *c, int lnum) +{ + int err, len = c->leb_size, dirty = 0, node_type, node_num, node_len; + int ret; + void *buf = c->dbg_buf; + + dbg_lp("LEB %d", lnum); + err = ubi_read(c->ubi, lnum, buf, 0, c->leb_size); + if (err) { + dbg_msg("ubi_read failed, LEB %d, error %d", lnum, err); + return err; + } + while (1) { + if (!is_a_node(c, buf, len)) { + int i, pad_len; + + pad_len = get_pad_len(c, buf, len); + if (pad_len) { + buf += pad_len; + len -= pad_len; + dirty += pad_len; + continue; + } + if (!dbg_is_all_ff(buf, len)) { + dbg_msg("invalid empty space in LEB %d at %d", + lnum, c->leb_size - len); + err = -EINVAL; + } + i = lnum - c->lpt_first; + if (len != c->ltab[i].free) { + dbg_msg("invalid free space in LEB %d " + "(free %d, expected %d)", + lnum, len, c->ltab[i].free); + err = -EINVAL; + } + if (dirty != c->ltab[i].dirty) { + dbg_msg("invalid dirty space in LEB %d " + "(dirty %d, expected %d)", + lnum, dirty, c->ltab[i].dirty); + err = -EINVAL; + } + return err; + } + node_type = get_lpt_node_type(c, buf, &node_num); + node_len = get_lpt_node_len(c, node_type); + ret = dbg_is_node_dirty(c, node_type, lnum, c->leb_size - len); + if (ret == 1) + dirty += node_len; + buf += node_len; + len -= node_len; + } +} + +/** + * dbg_check_ltab - check the free and dirty space in the ltab. + * @c: the UBIFS file-system description object + * + * This function returns %0 on success and a negative error code on failure. + */ +int dbg_check_ltab(struct ubifs_info *c) +{ + int lnum, err, i, cnt; + + if (!(ubifs_chk_flags & UBIFS_CHK_LPROPS)) + return 0; + + /* Bring the entire tree into memory */ + cnt = DIV_ROUND_UP(c->main_lebs, UBIFS_LPT_FANOUT); + for (i = 0; i < cnt; i++) { + struct ubifs_pnode *pnode; + + pnode = pnode_lookup(c, i); + if (IS_ERR(pnode)) + return PTR_ERR(pnode); + cond_resched(); + } + + /* Check nodes */ + err = dbg_check_lpt_nodes(c, (struct ubifs_cnode *)c->nroot, 0, 0); + if (err) + return err; + + /* Check each LEB */ + for (lnum = c->lpt_first; lnum <= c->lpt_last; lnum++) { + err = dbg_check_ltab_lnum(c, lnum); + if (err) { + dbg_err("failed at LEB %d", lnum); + return err; + } + } + + dbg_lp("succeeded"); + return 0; +} + +#endif /* CONFIG_UBIFS_FS_DEBUG */ diff --git a/fs/ubifs/master.c b/fs/ubifs/master.c new file mode 100644 index 000000000000..71d5493bf565 --- /dev/null +++ b/fs/ubifs/master.c @@ -0,0 +1,387 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* This file implements reading and writing the master node */ + +#include "ubifs.h" + +/** + * scan_for_master - search the valid master node. + * @c: UBIFS file-system description object + * + * This function scans the master node LEBs and search for the latest master + * node. Returns zero in case of success and a negative error code in case of + * failure. + */ +static int scan_for_master(struct ubifs_info *c) +{ + struct ubifs_scan_leb *sleb; + struct ubifs_scan_node *snod; + int lnum, offs = 0, nodes_cnt; + + lnum = UBIFS_MST_LNUM; + + sleb = ubifs_scan(c, lnum, 0, c->sbuf); + if (IS_ERR(sleb)) + return PTR_ERR(sleb); + nodes_cnt = sleb->nodes_cnt; + if (nodes_cnt > 0) { + snod = list_entry(sleb->nodes.prev, struct ubifs_scan_node, + list); + if (snod->type != UBIFS_MST_NODE) + goto out; + memcpy(c->mst_node, snod->node, snod->len); + offs = snod->offs; + } + ubifs_scan_destroy(sleb); + + lnum += 1; + + sleb = ubifs_scan(c, lnum, 0, c->sbuf); + if (IS_ERR(sleb)) + return PTR_ERR(sleb); + if (sleb->nodes_cnt != nodes_cnt) + goto out; + if (!sleb->nodes_cnt) + goto out; + snod = list_entry(sleb->nodes.prev, struct ubifs_scan_node, list); + if (snod->type != UBIFS_MST_NODE) + goto out; + if (snod->offs != offs) + goto out; + if (memcmp((void *)c->mst_node + UBIFS_CH_SZ, + (void *)snod->node + UBIFS_CH_SZ, + UBIFS_MST_NODE_SZ - UBIFS_CH_SZ)) + goto out; + c->mst_offs = offs; + ubifs_scan_destroy(sleb); + return 0; + +out: + ubifs_scan_destroy(sleb); + return -EINVAL; +} + +/** + * validate_master - validate master node. + * @c: UBIFS file-system description object + * + * This function validates data which was read from master node. Returns zero + * if the data is all right and %-EINVAL if not. + */ +static int validate_master(const struct ubifs_info *c) +{ + long long main_sz; + int err; + + if (c->max_sqnum >= SQNUM_WATERMARK) { + err = 1; + goto out; + } + + if (c->cmt_no >= c->max_sqnum) { + err = 2; + goto out; + } + + if (c->highest_inum >= INUM_WATERMARK) { + err = 3; + goto out; + } + + if (c->lhead_lnum < UBIFS_LOG_LNUM || + c->lhead_lnum >= UBIFS_LOG_LNUM + c->log_lebs || + c->lhead_offs < 0 || c->lhead_offs >= c->leb_size || + c->lhead_offs & (c->min_io_size - 1)) { + err = 4; + goto out; + } + + if (c->zroot.lnum >= c->leb_cnt || c->zroot.lnum < c->main_first || + c->zroot.offs >= c->leb_size || c->zroot.offs & 7) { + err = 5; + goto out; + } + + if (c->zroot.len < c->ranges[UBIFS_IDX_NODE].min_len || + c->zroot.len > c->ranges[UBIFS_IDX_NODE].max_len) { + err = 6; + goto out; + } + + if (c->gc_lnum >= c->leb_cnt || c->gc_lnum < c->main_first) { + err = 7; + goto out; + } + + if (c->ihead_lnum >= c->leb_cnt || c->ihead_lnum < c->main_first || + c->ihead_offs % c->min_io_size || c->ihead_offs < 0 || + c->ihead_offs > c->leb_size || c->ihead_offs & 7) { + err = 8; + goto out; + } + + main_sz = (long long)c->main_lebs * c->leb_size; + if (c->old_idx_sz & 7 || c->old_idx_sz >= main_sz) { + err = 9; + goto out; + } + + if (c->lpt_lnum < c->lpt_first || c->lpt_lnum > c->lpt_last || + c->lpt_offs < 0 || c->lpt_offs + c->nnode_sz > c->leb_size) { + err = 10; + goto out; + } + + if (c->nhead_lnum < c->lpt_first || c->nhead_lnum > c->lpt_last || + c->nhead_offs < 0 || c->nhead_offs % c->min_io_size || + c->nhead_offs > c->leb_size) { + err = 11; + goto out; + } + + if (c->ltab_lnum < c->lpt_first || c->ltab_lnum > c->lpt_last || + c->ltab_offs < 0 || + c->ltab_offs + c->ltab_sz > c->leb_size) { + err = 12; + goto out; + } + + if (c->big_lpt && (c->lsave_lnum < c->lpt_first || + c->lsave_lnum > c->lpt_last || c->lsave_offs < 0 || + c->lsave_offs + c->lsave_sz > c->leb_size)) { + err = 13; + goto out; + } + + if (c->lscan_lnum < c->main_first || c->lscan_lnum >= c->leb_cnt) { + err = 14; + goto out; + } + + if (c->lst.empty_lebs < 0 || c->lst.empty_lebs > c->main_lebs - 2) { + err = 15; + goto out; + } + + if (c->lst.idx_lebs < 0 || c->lst.idx_lebs > c->main_lebs - 1) { + err = 16; + goto out; + } + + if (c->lst.total_free < 0 || c->lst.total_free > main_sz || + c->lst.total_free & 7) { + err = 17; + goto out; + } + + if (c->lst.total_dirty < 0 || (c->lst.total_dirty & 7)) { + err = 18; + goto out; + } + + if (c->lst.total_used < 0 || (c->lst.total_used & 7)) { + err = 19; + goto out; + } + + if (c->lst.total_free + c->lst.total_dirty + + c->lst.total_used > main_sz) { + err = 20; + goto out; + } + + if (c->lst.total_dead + c->lst.total_dark + + c->lst.total_used + c->old_idx_sz > main_sz) { + err = 21; + goto out; + } + + if (c->lst.total_dead < 0 || + c->lst.total_dead > c->lst.total_free + c->lst.total_dirty || + c->lst.total_dead & 7) { + err = 22; + goto out; + } + + if (c->lst.total_dark < 0 || + c->lst.total_dark > c->lst.total_free + c->lst.total_dirty || + c->lst.total_dark & 7) { + err = 23; + goto out; + } + + return 0; + +out: + ubifs_err("bad master node at offset %d error %d", c->mst_offs, err); + dbg_dump_node(c, c->mst_node); + return -EINVAL; +} + +/** + * ubifs_read_master - read master node. + * @c: UBIFS file-system description object + * + * This function finds and reads the master node during file-system mount. If + * the flash is empty, it creates default master node as well. Returns zero in + * case of success and a negative error code in case of failure. + */ +int ubifs_read_master(struct ubifs_info *c) +{ + int err, old_leb_cnt; + + c->mst_node = kzalloc(c->mst_node_alsz, GFP_KERNEL); + if (!c->mst_node) + return -ENOMEM; + + err = scan_for_master(c); + if (err) { + err = ubifs_recover_master_node(c); + if (err) + /* + * Note, we do not free 'c->mst_node' here because the + * unmount routine will take care of this. + */ + return err; + } + + /* Make sure that the recovery flag is clear */ + c->mst_node->flags &= cpu_to_le32(~UBIFS_MST_RCVRY); + + c->max_sqnum = le64_to_cpu(c->mst_node->ch.sqnum); + c->highest_inum = le64_to_cpu(c->mst_node->highest_inum); + c->cmt_no = le64_to_cpu(c->mst_node->cmt_no); + c->zroot.lnum = le32_to_cpu(c->mst_node->root_lnum); + c->zroot.offs = le32_to_cpu(c->mst_node->root_offs); + c->zroot.len = le32_to_cpu(c->mst_node->root_len); + c->lhead_lnum = le32_to_cpu(c->mst_node->log_lnum); + c->gc_lnum = le32_to_cpu(c->mst_node->gc_lnum); + c->ihead_lnum = le32_to_cpu(c->mst_node->ihead_lnum); + c->ihead_offs = le32_to_cpu(c->mst_node->ihead_offs); + c->old_idx_sz = le64_to_cpu(c->mst_node->index_size); + c->lpt_lnum = le32_to_cpu(c->mst_node->lpt_lnum); + c->lpt_offs = le32_to_cpu(c->mst_node->lpt_offs); + c->nhead_lnum = le32_to_cpu(c->mst_node->nhead_lnum); + c->nhead_offs = le32_to_cpu(c->mst_node->nhead_offs); + c->ltab_lnum = le32_to_cpu(c->mst_node->ltab_lnum); + c->ltab_offs = le32_to_cpu(c->mst_node->ltab_offs); + c->lsave_lnum = le32_to_cpu(c->mst_node->lsave_lnum); + c->lsave_offs = le32_to_cpu(c->mst_node->lsave_offs); + c->lscan_lnum = le32_to_cpu(c->mst_node->lscan_lnum); + c->lst.empty_lebs = le32_to_cpu(c->mst_node->empty_lebs); + c->lst.idx_lebs = le32_to_cpu(c->mst_node->idx_lebs); + old_leb_cnt = le32_to_cpu(c->mst_node->leb_cnt); + c->lst.total_free = le64_to_cpu(c->mst_node->total_free); + c->lst.total_dirty = le64_to_cpu(c->mst_node->total_dirty); + c->lst.total_used = le64_to_cpu(c->mst_node->total_used); + c->lst.total_dead = le64_to_cpu(c->mst_node->total_dead); + c->lst.total_dark = le64_to_cpu(c->mst_node->total_dark); + + c->calc_idx_sz = c->old_idx_sz; + + if (c->mst_node->flags & cpu_to_le32(UBIFS_MST_NO_ORPHS)) + c->no_orphs = 1; + + if (old_leb_cnt != c->leb_cnt) { + /* The file system has been resized */ + int growth = c->leb_cnt - old_leb_cnt; + + if (c->leb_cnt < old_leb_cnt || + c->leb_cnt < UBIFS_MIN_LEB_CNT) { + ubifs_err("bad leb_cnt on master node"); + dbg_dump_node(c, c->mst_node); + return -EINVAL; + } + + dbg_mnt("Auto resizing (master) from %d LEBs to %d LEBs", + old_leb_cnt, c->leb_cnt); + c->lst.empty_lebs += growth; + c->lst.total_free += growth * (long long)c->leb_size; + c->lst.total_dark += growth * (long long)c->dark_wm; + + /* + * Reflect changes back onto the master node. N.B. the master + * node gets written immediately whenever mounting (or + * remounting) in read-write mode, so we do not need to write it + * here. + */ + c->mst_node->leb_cnt = cpu_to_le32(c->leb_cnt); + c->mst_node->empty_lebs = cpu_to_le32(c->lst.empty_lebs); + c->mst_node->total_free = cpu_to_le64(c->lst.total_free); + c->mst_node->total_dark = cpu_to_le64(c->lst.total_dark); + } + + err = validate_master(c); + if (err) + return err; + + err = dbg_old_index_check_init(c, &c->zroot); + + return err; +} + +/** + * ubifs_write_master - write master node. + * @c: UBIFS file-system description object + * + * This function writes the master node. The caller has to take the + * @c->mst_mutex lock before calling this function. Returns zero in case of + * success and a negative error code in case of failure. The master node is + * written twice to enable recovery. + */ +int ubifs_write_master(struct ubifs_info *c) +{ + int err, lnum, offs, len; + + if (c->ro_media) + return -EINVAL; + + lnum = UBIFS_MST_LNUM; + offs = c->mst_offs + c->mst_node_alsz; + len = UBIFS_MST_NODE_SZ; + + if (offs + UBIFS_MST_NODE_SZ > c->leb_size) { + err = ubifs_leb_unmap(c, lnum); + if (err) + return err; + offs = 0; + } + + c->mst_offs = offs; + c->mst_node->highest_inum = cpu_to_le64(c->highest_inum); + + err = ubifs_write_node(c, c->mst_node, len, lnum, offs, UBI_SHORTTERM); + if (err) + return err; + + lnum += 1; + + if (offs == 0) { + err = ubifs_leb_unmap(c, lnum); + if (err) + return err; + } + err = ubifs_write_node(c, c->mst_node, len, lnum, offs, UBI_SHORTTERM); + + return err; +} diff --git a/fs/ubifs/misc.h b/fs/ubifs/misc.h new file mode 100644 index 000000000000..4beccfc256d2 --- /dev/null +++ b/fs/ubifs/misc.h @@ -0,0 +1,342 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* + * This file contains miscellaneous helper functions. + */ + +#ifndef __UBIFS_MISC_H__ +#define __UBIFS_MISC_H__ + +/** + * ubifs_zn_dirty - check if znode is dirty. + * @znode: znode to check + * + * This helper function returns %1 if @znode is dirty and %0 otherwise. + */ +static inline int ubifs_zn_dirty(const struct ubifs_znode *znode) +{ + return !!test_bit(DIRTY_ZNODE, &znode->flags); +} + +/** + * ubifs_wake_up_bgt - wake up background thread. + * @c: UBIFS file-system description object + */ +static inline void ubifs_wake_up_bgt(struct ubifs_info *c) +{ + if (c->bgt && !c->need_bgt) { + c->need_bgt = 1; + wake_up_process(c->bgt); + } +} + +/** + * ubifs_tnc_find_child - find next child in znode. + * @znode: znode to search at + * @start: the zbranch index to start at + * + * This helper function looks for znode child starting at index @start. Returns + * the child or %NULL if no children were found. + */ +static inline struct ubifs_znode * +ubifs_tnc_find_child(struct ubifs_znode *znode, int start) +{ + while (start < znode->child_cnt) { + if (znode->zbranch[start].znode) + return znode->zbranch[start].znode; + start += 1; + } + + return NULL; +} + +/** + * ubifs_inode - get UBIFS inode information by VFS 'struct inode' object. + * @inode: the VFS 'struct inode' pointer + */ +static inline struct ubifs_inode *ubifs_inode(const struct inode *inode) +{ + return container_of(inode, struct ubifs_inode, vfs_inode); +} + +/** + * ubifs_ro_mode - switch UBIFS to read read-only mode. + * @c: UBIFS file-system description object + * @err: error code which is the reason of switching to R/O mode + */ +static inline void ubifs_ro_mode(struct ubifs_info *c, int err) +{ + if (!c->ro_media) { + c->ro_media = 1; + ubifs_warn("switched to read-only mode, error %d", err); + dbg_dump_stack(); + } +} + +/** + * ubifs_compr_present - check if compressor was compiled in. + * @compr_type: compressor type to check + * + * This function returns %1 of compressor of type @compr_type is present, and + * %0 if not. + */ +static inline int ubifs_compr_present(int compr_type) +{ + ubifs_assert(compr_type >= 0 && compr_type < UBIFS_COMPR_TYPES_CNT); + return !!ubifs_compressors[compr_type]->capi_name; +} + +/** + * ubifs_compr_name - get compressor name string by its type. + * @compr_type: compressor type + * + * This function returns compressor type string. + */ +static inline const char *ubifs_compr_name(int compr_type) +{ + ubifs_assert(compr_type >= 0 && compr_type < UBIFS_COMPR_TYPES_CNT); + return ubifs_compressors[compr_type]->name; +} + +/** + * ubifs_wbuf_sync - synchronize write-buffer. + * @wbuf: write-buffer to synchronize + * + * This is the same as as 'ubifs_wbuf_sync_nolock()' but it does not assume + * that the write-buffer is already locked. + */ +static inline int ubifs_wbuf_sync(struct ubifs_wbuf *wbuf) +{ + int err; + + mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); + err = ubifs_wbuf_sync_nolock(wbuf); + mutex_unlock(&wbuf->io_mutex); + return err; +} + +/** + * ubifs_leb_unmap - unmap an LEB. + * @c: UBIFS file-system description object + * @lnum: LEB number to unmap + * + * This function returns %0 on success and a negative error code on failure. + */ +static inline int ubifs_leb_unmap(const struct ubifs_info *c, int lnum) +{ + int err; + + if (c->ro_media) + return -EROFS; + err = ubi_leb_unmap(c->ubi, lnum); + if (err) { + ubifs_err("unmap LEB %d failed, error %d", lnum, err); + return err; + } + + return 0; +} + +/** + * ubifs_leb_write - write to a LEB. + * @c: UBIFS file-system description object + * @lnum: LEB number to write + * @buf: buffer to write from + * @offs: offset within LEB to write to + * @len: length to write + * @dtype: data type + * + * This function returns %0 on success and a negative error code on failure. + */ +static inline int ubifs_leb_write(const struct ubifs_info *c, int lnum, + const void *buf, int offs, int len, int dtype) +{ + int err; + + if (c->ro_media) + return -EROFS; + err = ubi_leb_write(c->ubi, lnum, buf, offs, len, dtype); + if (err) { + ubifs_err("writing %d bytes at %d:%d, error %d", + len, lnum, offs, err); + return err; + } + + return 0; +} + +/** + * ubifs_leb_change - atomic LEB change. + * @c: UBIFS file-system description object + * @lnum: LEB number to write + * @buf: buffer to write from + * @len: length to write + * @dtype: data type + * + * This function returns %0 on success and a negative error code on failure. + */ +static inline int ubifs_leb_change(const struct ubifs_info *c, int lnum, + const void *buf, int len, int dtype) +{ + int err; + + if (c->ro_media) + return -EROFS; + err = ubi_leb_change(c->ubi, lnum, buf, len, dtype); + if (err) { + ubifs_err("changing %d bytes in LEB %d, error %d", + len, lnum, err); + return err; + } + + return 0; +} + +/** + * ubifs_encode_dev - encode device node IDs. + * @dev: UBIFS device node information + * @rdev: device IDs to encode + * + * This is a helper function which encodes major/minor numbers of a device node + * into UBIFS device node description. We use standard Linux "new" and "huge" + * encodings. + */ +static inline int ubifs_encode_dev(union ubifs_dev_desc *dev, dev_t rdev) +{ + if (new_valid_dev(rdev)) { + dev->new = cpu_to_le32(new_encode_dev(rdev)); + return sizeof(dev->new); + } else { + dev->huge = cpu_to_le64(huge_encode_dev(rdev)); + return sizeof(dev->huge); + } +} + +/** + * ubifs_add_dirt - add dirty space to LEB properties. + * @c: the UBIFS file-system description object + * @lnum: LEB to add dirty space for + * @dirty: dirty space to add + * + * This is a helper function which increased amount of dirty LEB space. Returns + * zero in case of success and a negative error code in case of failure. + */ +static inline int ubifs_add_dirt(struct ubifs_info *c, int lnum, int dirty) +{ + return ubifs_update_one_lp(c, lnum, LPROPS_NC, dirty, 0, 0); +} + +/** + * ubifs_return_leb - return LEB to lprops. + * @c: the UBIFS file-system description object + * @lnum: LEB to return + * + * This helper function cleans the "taken" flag of a logical eraseblock in the + * lprops. Returns zero in case of success and a negative error code in case of + * failure. + */ +static inline int ubifs_return_leb(struct ubifs_info *c, int lnum) +{ + return ubifs_change_one_lp(c, lnum, LPROPS_NC, LPROPS_NC, 0, + LPROPS_TAKEN, 0); +} + +/** + * ubifs_idx_node_sz - return index node size. + * @c: the UBIFS file-system description object + * @child_cnt: number of children of this index node + */ +static inline int ubifs_idx_node_sz(const struct ubifs_info *c, int child_cnt) +{ + return UBIFS_IDX_NODE_SZ + (UBIFS_BRANCH_SZ + c->key_len) * child_cnt; +} + +/** + * ubifs_idx_branch - return pointer to an index branch. + * @c: the UBIFS file-system description object + * @idx: index node + * @bnum: branch number + */ +static inline +struct ubifs_branch *ubifs_idx_branch(const struct ubifs_info *c, + const struct ubifs_idx_node *idx, + int bnum) +{ + return (struct ubifs_branch *)((void *)idx->branches + + (UBIFS_BRANCH_SZ + c->key_len) * bnum); +} + +/** + * ubifs_idx_key - return pointer to an index key. + * @c: the UBIFS file-system description object + * @idx: index node + */ +static inline void *ubifs_idx_key(const struct ubifs_info *c, + const struct ubifs_idx_node *idx) +{ + return (void *)((struct ubifs_branch *)idx->branches)->key; +} + +/** + * ubifs_reported_space - calculate reported free space. + * @c: the UBIFS file-system description object + * @free: amount of free space + * + * This function calculates amount of free space which will be reported to + * user-space. User-space application tend to expect that if the file-system + * (e.g., via the 'statfs()' call) reports that it has N bytes available, they + * are able to write a file of size N. UBIFS attaches node headers to each data + * node and it has to write indexind nodes as well. This introduces additional + * overhead, and UBIFS it has to report sligtly less free space to meet the + * above expectetion. + * + * This function assumes free space is made up of uncompressed data nodes and + * full index nodes (one per data node, doubled because we always allow enough + * space to write the index twice). + * + * Note, the calculation is pessimistic, which means that most of the time + * UBIFS reports less space than it actually has. + */ +static inline long long ubifs_reported_space(const struct ubifs_info *c, + uint64_t free) +{ + int divisor, factor; + + divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz << 1); + factor = UBIFS_MAX_DATA_NODE_SZ - UBIFS_DATA_NODE_SZ; + do_div(free, divisor); + + return free * factor; +} + +/** + * ubifs_current_time - round current time to time granularity. + * @inode: inode + */ +static inline struct timespec ubifs_current_time(struct inode *inode) +{ + return (inode->i_sb->s_time_gran < NSEC_PER_SEC) ? + current_fs_time(inode->i_sb) : CURRENT_TIME_SEC; +} + +#endif /* __UBIFS_MISC_H__ */ diff --git a/fs/ubifs/orphan.c b/fs/ubifs/orphan.c new file mode 100644 index 000000000000..3afeb9242c6a --- /dev/null +++ b/fs/ubifs/orphan.c @@ -0,0 +1,958 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Author: Adrian Hunter + */ + +#include "ubifs.h" + +/* + * An orphan is an inode number whose inode node has been committed to the index + * with a link count of zero. That happens when an open file is deleted + * (unlinked) and then a commit is run. In the normal course of events the inode + * would be deleted when the file is closed. However in the case of an unclean + * unmount, orphans need to be accounted for. After an unclean unmount, the + * orphans' inodes must be deleted which means either scanning the entire index + * looking for them, or keeping a list on flash somewhere. This unit implements + * the latter approach. + * + * The orphan area is a fixed number of LEBs situated between the LPT area and + * the main area. The number of orphan area LEBs is specified when the file + * system is created. The minimum number is 1. The size of the orphan area + * should be so that it can hold the maximum number of orphans that are expected + * to ever exist at one time. + * + * The number of orphans that can fit in a LEB is: + * + * (c->leb_size - UBIFS_ORPH_NODE_SZ) / sizeof(__le64) + * + * For example: a 15872 byte LEB can fit 1980 orphans so 1 LEB may be enough. + * + * Orphans are accumulated in a rb-tree. When an inode's link count drops to + * zero, the inode number is added to the rb-tree. It is removed from the tree + * when the inode is deleted. Any new orphans that are in the orphan tree when + * the commit is run, are written to the orphan area in 1 or more orph nodes. + * If the orphan area is full, it is consolidated to make space. There is + * always enough space because validation prevents the user from creating more + * than the maximum number of orphans allowed. + */ + +#ifdef CONFIG_UBIFS_FS_DEBUG +static int dbg_check_orphans(struct ubifs_info *c); +#else +#define dbg_check_orphans(c) 0 +#endif + +/** + * ubifs_add_orphan - add an orphan. + * @c: UBIFS file-system description object + * @inum: orphan inode number + * + * Add an orphan. This function is called when an inodes link count drops to + * zero. + */ +int ubifs_add_orphan(struct ubifs_info *c, ino_t inum) +{ + struct ubifs_orphan *orphan, *o; + struct rb_node **p, *parent = NULL; + + orphan = kzalloc(sizeof(struct ubifs_orphan), GFP_NOFS); + if (!orphan) + return -ENOMEM; + orphan->inum = inum; + orphan->new = 1; + + spin_lock(&c->orphan_lock); + if (c->tot_orphans >= c->max_orphans) { + spin_unlock(&c->orphan_lock); + kfree(orphan); + return -ENFILE; + } + p = &c->orph_tree.rb_node; + while (*p) { + parent = *p; + o = rb_entry(parent, struct ubifs_orphan, rb); + if (inum < o->inum) + p = &(*p)->rb_left; + else if (inum > o->inum) + p = &(*p)->rb_right; + else { + dbg_err("orphaned twice"); + spin_unlock(&c->orphan_lock); + kfree(orphan); + return 0; + } + } + c->tot_orphans += 1; + c->new_orphans += 1; + rb_link_node(&orphan->rb, parent, p); + rb_insert_color(&orphan->rb, &c->orph_tree); + list_add_tail(&orphan->list, &c->orph_list); + list_add_tail(&orphan->new_list, &c->orph_new); + spin_unlock(&c->orphan_lock); + dbg_gen("ino %lu", inum); + return 0; +} + +/** + * ubifs_delete_orphan - delete an orphan. + * @c: UBIFS file-system description object + * @inum: orphan inode number + * + * Delete an orphan. This function is called when an inode is deleted. + */ +void ubifs_delete_orphan(struct ubifs_info *c, ino_t inum) +{ + struct ubifs_orphan *o; + struct rb_node *p; + + spin_lock(&c->orphan_lock); + p = c->orph_tree.rb_node; + while (p) { + o = rb_entry(p, struct ubifs_orphan, rb); + if (inum < o->inum) + p = p->rb_left; + else if (inum > o->inum) + p = p->rb_right; + else { + if (o->dnext) { + spin_unlock(&c->orphan_lock); + dbg_gen("deleted twice ino %lu", inum); + return; + } + if (o->cnext) { + o->dnext = c->orph_dnext; + c->orph_dnext = o; + spin_unlock(&c->orphan_lock); + dbg_gen("delete later ino %lu", inum); + return; + } + rb_erase(p, &c->orph_tree); + list_del(&o->list); + c->tot_orphans -= 1; + if (o->new) { + list_del(&o->new_list); + c->new_orphans -= 1; + } + spin_unlock(&c->orphan_lock); + kfree(o); + dbg_gen("inum %lu", inum); + return; + } + } + spin_unlock(&c->orphan_lock); + dbg_err("missing orphan ino %lu", inum); + dbg_dump_stack(); +} + +/** + * ubifs_orphan_start_commit - start commit of orphans. + * @c: UBIFS file-system description object + * + * Start commit of orphans. + */ +int ubifs_orphan_start_commit(struct ubifs_info *c) +{ + struct ubifs_orphan *orphan, **last; + + spin_lock(&c->orphan_lock); + last = &c->orph_cnext; + list_for_each_entry(orphan, &c->orph_new, new_list) { + ubifs_assert(orphan->new); + orphan->new = 0; + *last = orphan; + last = &orphan->cnext; + } + *last = orphan->cnext; + c->cmt_orphans = c->new_orphans; + c->new_orphans = 0; + dbg_cmt("%d orphans to commit", c->cmt_orphans); + INIT_LIST_HEAD(&c->orph_new); + if (c->tot_orphans == 0) + c->no_orphs = 1; + else + c->no_orphs = 0; + spin_unlock(&c->orphan_lock); + return 0; +} + +/** + * avail_orphs - calculate available space. + * @c: UBIFS file-system description object + * + * This function returns the number of orphans that can be written in the + * available space. + */ +static int avail_orphs(struct ubifs_info *c) +{ + int avail_lebs, avail, gap; + + avail_lebs = c->orph_lebs - (c->ohead_lnum - c->orph_first) - 1; + avail = avail_lebs * + ((c->leb_size - UBIFS_ORPH_NODE_SZ) / sizeof(__le64)); + gap = c->leb_size - c->ohead_offs; + if (gap >= UBIFS_ORPH_NODE_SZ + sizeof(__le64)) + avail += (gap - UBIFS_ORPH_NODE_SZ) / sizeof(__le64); + return avail; +} + +/** + * tot_avail_orphs - calculate total space. + * @c: UBIFS file-system description object + * + * This function returns the number of orphans that can be written in half + * the total space. That leaves half the space for adding new orphans. + */ +static int tot_avail_orphs(struct ubifs_info *c) +{ + int avail_lebs, avail; + + avail_lebs = c->orph_lebs; + avail = avail_lebs * + ((c->leb_size - UBIFS_ORPH_NODE_SZ) / sizeof(__le64)); + return avail / 2; +} + +/** + * do_write_orph_node - write a node + * @c: UBIFS file-system description object + * @len: length of node + * @atomic: write atomically + * + * This function writes a node to the orphan head from the orphan buffer. If + * %atomic is not zero, then the write is done atomically. On success, %0 is + * returned, otherwise a negative error code is returned. + */ +static int do_write_orph_node(struct ubifs_info *c, int len, int atomic) +{ + int err = 0; + + if (atomic) { + ubifs_assert(c->ohead_offs == 0); + ubifs_prepare_node(c, c->orph_buf, len, 1); + len = ALIGN(len, c->min_io_size); + err = ubifs_leb_change(c, c->ohead_lnum, c->orph_buf, len, + UBI_SHORTTERM); + } else { + if (c->ohead_offs == 0) { + /* Ensure LEB has been unmapped */ + err = ubifs_leb_unmap(c, c->ohead_lnum); + if (err) + return err; + } + err = ubifs_write_node(c, c->orph_buf, len, c->ohead_lnum, + c->ohead_offs, UBI_SHORTTERM); + } + return err; +} + +/** + * write_orph_node - write an orph node + * @c: UBIFS file-system description object + * @atomic: write atomically + * + * This function builds an orph node from the cnext list and writes it to the + * orphan head. On success, %0 is returned, otherwise a negative error code + * is returned. + */ +static int write_orph_node(struct ubifs_info *c, int atomic) +{ + struct ubifs_orphan *orphan, *cnext; + struct ubifs_orph_node *orph; + int gap, err, len, cnt, i; + + ubifs_assert(c->cmt_orphans > 0); + gap = c->leb_size - c->ohead_offs; + if (gap < UBIFS_ORPH_NODE_SZ + sizeof(__le64)) { + c->ohead_lnum += 1; + c->ohead_offs = 0; + gap = c->leb_size; + if (c->ohead_lnum > c->orph_last) { + /* + * We limit the number of orphans so that this should + * never happen. + */ + ubifs_err("out of space in orphan area"); + return -EINVAL; + } + } + cnt = (gap - UBIFS_ORPH_NODE_SZ) / sizeof(__le64); + if (cnt > c->cmt_orphans) + cnt = c->cmt_orphans; + len = UBIFS_ORPH_NODE_SZ + cnt * sizeof(__le64); + ubifs_assert(c->orph_buf); + orph = c->orph_buf; + orph->ch.node_type = UBIFS_ORPH_NODE; + spin_lock(&c->orphan_lock); + cnext = c->orph_cnext; + for (i = 0; i < cnt; i++) { + orphan = cnext; + orph->inos[i] = cpu_to_le64(orphan->inum); + cnext = orphan->cnext; + orphan->cnext = NULL; + } + c->orph_cnext = cnext; + c->cmt_orphans -= cnt; + spin_unlock(&c->orphan_lock); + if (c->cmt_orphans) + orph->cmt_no = cpu_to_le64(c->cmt_no + 1); + else + /* Mark the last node of the commit */ + orph->cmt_no = cpu_to_le64((c->cmt_no + 1) | (1ULL << 63)); + ubifs_assert(c->ohead_offs + len <= c->leb_size); + ubifs_assert(c->ohead_lnum >= c->orph_first); + ubifs_assert(c->ohead_lnum <= c->orph_last); + err = do_write_orph_node(c, len, atomic); + c->ohead_offs += ALIGN(len, c->min_io_size); + c->ohead_offs = ALIGN(c->ohead_offs, 8); + return err; +} + +/** + * write_orph_nodes - write orph nodes until there are no more to commit + * @c: UBIFS file-system description object + * @atomic: write atomically + * + * This function writes orph nodes for all the orphans to commit. On success, + * %0 is returned, otherwise a negative error code is returned. + */ +static int write_orph_nodes(struct ubifs_info *c, int atomic) +{ + int err; + + while (c->cmt_orphans > 0) { + err = write_orph_node(c, atomic); + if (err) + return err; + } + if (atomic) { + int lnum; + + /* Unmap any unused LEBs after consolidation */ + lnum = c->ohead_lnum + 1; + for (lnum = c->ohead_lnum + 1; lnum <= c->orph_last; lnum++) { + err = ubifs_leb_unmap(c, lnum); + if (err) + return err; + } + } + return 0; +} + +/** + * consolidate - consolidate the orphan area. + * @c: UBIFS file-system description object + * + * This function enables consolidation by putting all the orphans into the list + * to commit. The list is in the order that the orphans were added, and the + * LEBs are written atomically in order, so at no time can orphans be lost by + * an unclean unmount. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int consolidate(struct ubifs_info *c) +{ + int tot_avail = tot_avail_orphs(c), err = 0; + + spin_lock(&c->orphan_lock); + dbg_cmt("there is space for %d orphans and there are %d", + tot_avail, c->tot_orphans); + if (c->tot_orphans - c->new_orphans <= tot_avail) { + struct ubifs_orphan *orphan, **last; + int cnt = 0; + + /* Change the cnext list to include all non-new orphans */ + last = &c->orph_cnext; + list_for_each_entry(orphan, &c->orph_list, list) { + if (orphan->new) + continue; + *last = orphan; + last = &orphan->cnext; + cnt += 1; + } + *last = orphan->cnext; + ubifs_assert(cnt == c->tot_orphans - c->new_orphans); + c->cmt_orphans = cnt; + c->ohead_lnum = c->orph_first; + c->ohead_offs = 0; + } else { + /* + * We limit the number of orphans so that this should + * never happen. + */ + ubifs_err("out of space in orphan area"); + err = -EINVAL; + } + spin_unlock(&c->orphan_lock); + return err; +} + +/** + * commit_orphans - commit orphans. + * @c: UBIFS file-system description object + * + * This function commits orphans to flash. On success, %0 is returned, + * otherwise a negative error code is returned. + */ +static int commit_orphans(struct ubifs_info *c) +{ + int avail, atomic = 0, err; + + ubifs_assert(c->cmt_orphans > 0); + avail = avail_orphs(c); + if (avail < c->cmt_orphans) { + /* Not enough space to write new orphans, so consolidate */ + err = consolidate(c); + if (err) + return err; + atomic = 1; + } + err = write_orph_nodes(c, atomic); + return err; +} + +/** + * erase_deleted - erase the orphans marked for deletion. + * @c: UBIFS file-system description object + * + * During commit, the orphans being committed cannot be deleted, so they are + * marked for deletion and deleted by this function. Also, the recovery + * adds killed orphans to the deletion list, and therefore they are deleted + * here too. + */ +static void erase_deleted(struct ubifs_info *c) +{ + struct ubifs_orphan *orphan, *dnext; + + spin_lock(&c->orphan_lock); + dnext = c->orph_dnext; + while (dnext) { + orphan = dnext; + dnext = orphan->dnext; + ubifs_assert(!orphan->new); + rb_erase(&orphan->rb, &c->orph_tree); + list_del(&orphan->list); + c->tot_orphans -= 1; + dbg_gen("deleting orphan ino %lu", orphan->inum); + kfree(orphan); + } + c->orph_dnext = NULL; + spin_unlock(&c->orphan_lock); +} + +/** + * ubifs_orphan_end_commit - end commit of orphans. + * @c: UBIFS file-system description object + * + * End commit of orphans. + */ +int ubifs_orphan_end_commit(struct ubifs_info *c) +{ + int err; + + if (c->cmt_orphans != 0) { + err = commit_orphans(c); + if (err) + return err; + } + erase_deleted(c); + err = dbg_check_orphans(c); + return err; +} + +/** + * clear_orphans - erase all LEBs used for orphans. + * @c: UBIFS file-system description object + * + * If recovery is not required, then the orphans from the previous session + * are not needed. This function locates the LEBs used to record + * orphans, and un-maps them. + */ +static int clear_orphans(struct ubifs_info *c) +{ + int lnum, err; + + for (lnum = c->orph_first; lnum <= c->orph_last; lnum++) { + err = ubifs_leb_unmap(c, lnum); + if (err) + return err; + } + c->ohead_lnum = c->orph_first; + c->ohead_offs = 0; + return 0; +} + +/** + * insert_dead_orphan - insert an orphan. + * @c: UBIFS file-system description object + * @inum: orphan inode number + * + * This function is a helper to the 'do_kill_orphans()' function. The orphan + * must be kept until the next commit, so it is added to the rb-tree and the + * deletion list. + */ +static int insert_dead_orphan(struct ubifs_info *c, ino_t inum) +{ + struct ubifs_orphan *orphan, *o; + struct rb_node **p, *parent = NULL; + + orphan = kzalloc(sizeof(struct ubifs_orphan), GFP_KERNEL); + if (!orphan) + return -ENOMEM; + orphan->inum = inum; + + p = &c->orph_tree.rb_node; + while (*p) { + parent = *p; + o = rb_entry(parent, struct ubifs_orphan, rb); + if (inum < o->inum) + p = &(*p)->rb_left; + else if (inum > o->inum) + p = &(*p)->rb_right; + else { + /* Already added - no problem */ + kfree(orphan); + return 0; + } + } + c->tot_orphans += 1; + rb_link_node(&orphan->rb, parent, p); + rb_insert_color(&orphan->rb, &c->orph_tree); + list_add_tail(&orphan->list, &c->orph_list); + orphan->dnext = c->orph_dnext; + c->orph_dnext = orphan; + dbg_mnt("ino %lu, new %d, tot %d", + inum, c->new_orphans, c->tot_orphans); + return 0; +} + +/** + * do_kill_orphans - remove orphan inodes from the index. + * @c: UBIFS file-system description object + * @sleb: scanned LEB + * @last_cmt_no: cmt_no of last orph node read is passed and returned here + * @outofdate: whether the LEB is out of date is returned here + * @last_flagged: whether the end orph node is encountered + * + * This function is a helper to the 'kill_orphans()' function. It goes through + * every orphan node in a LEB and for every inode number recorded, removes + * all keys for that inode from the TNC. + */ +static int do_kill_orphans(struct ubifs_info *c, struct ubifs_scan_leb *sleb, + unsigned long long *last_cmt_no, int *outofdate, + int *last_flagged) +{ + struct ubifs_scan_node *snod; + struct ubifs_orph_node *orph; + unsigned long long cmt_no; + ino_t inum; + int i, n, err, first = 1; + + list_for_each_entry(snod, &sleb->nodes, list) { + if (snod->type != UBIFS_ORPH_NODE) { + ubifs_err("invalid node type %d in orphan area at " + "%d:%d", snod->type, sleb->lnum, snod->offs); + dbg_dump_node(c, snod->node); + return -EINVAL; + } + + orph = snod->node; + + /* Check commit number */ + cmt_no = le64_to_cpu(orph->cmt_no) & LLONG_MAX; + /* + * The commit number on the master node may be less, because + * of a failed commit. If there are several failed commits in a + * row, the commit number written on orph nodes will continue to + * increase (because the commit number is adjusted here) even + * though the commit number on the master node stays the same + * because the master node has not been re-written. + */ + if (cmt_no > c->cmt_no) + c->cmt_no = cmt_no; + if (cmt_no < *last_cmt_no && *last_flagged) { + /* + * The last orph node had a higher commit number and was + * flagged as the last written for that commit number. + * That makes this orph node, out of date. + */ + if (!first) { + ubifs_err("out of order commit number %llu in " + "orphan node at %d:%d", + cmt_no, sleb->lnum, snod->offs); + dbg_dump_node(c, snod->node); + return -EINVAL; + } + dbg_rcvry("out of date LEB %d", sleb->lnum); + *outofdate = 1; + return 0; + } + + if (first) + first = 0; + + n = (le32_to_cpu(orph->ch.len) - UBIFS_ORPH_NODE_SZ) >> 3; + for (i = 0; i < n; i++) { + inum = le64_to_cpu(orph->inos[i]); + dbg_rcvry("deleting orphaned inode %lu", inum); + err = ubifs_tnc_remove_ino(c, inum); + if (err) + return err; + err = insert_dead_orphan(c, inum); + if (err) + return err; + } + + *last_cmt_no = cmt_no; + if (le64_to_cpu(orph->cmt_no) & (1ULL << 63)) { + dbg_rcvry("last orph node for commit %llu at %d:%d", + cmt_no, sleb->lnum, snod->offs); + *last_flagged = 1; + } else + *last_flagged = 0; + } + + return 0; +} + +/** + * kill_orphans - remove all orphan inodes from the index. + * @c: UBIFS file-system description object + * + * If recovery is required, then orphan inodes recorded during the previous + * session (which ended with an unclean unmount) must be deleted from the index. + * This is done by updating the TNC, but since the index is not updated until + * the next commit, the LEBs where the orphan information is recorded are not + * erased until the next commit. + */ +static int kill_orphans(struct ubifs_info *c) +{ + unsigned long long last_cmt_no = 0; + int lnum, err = 0, outofdate = 0, last_flagged = 0; + + c->ohead_lnum = c->orph_first; + c->ohead_offs = 0; + /* Check no-orphans flag and skip this if no orphans */ + if (c->no_orphs) { + dbg_rcvry("no orphans"); + return 0; + } + /* + * Orph nodes always start at c->orph_first and are written to each + * successive LEB in turn. Generally unused LEBs will have been unmapped + * but may contain out of date orph nodes if the unmap didn't go + * through. In addition, the last orph node written for each commit is + * marked (top bit of orph->cmt_no is set to 1). It is possible that + * there are orph nodes from the next commit (i.e. the commit did not + * complete successfully). In that case, no orphans will have been lost + * due to the way that orphans are written, and any orphans added will + * be valid orphans anyway and so can be deleted. + */ + for (lnum = c->orph_first; lnum <= c->orph_last; lnum++) { + struct ubifs_scan_leb *sleb; + + dbg_rcvry("LEB %d", lnum); + sleb = ubifs_scan(c, lnum, 0, c->sbuf); + if (IS_ERR(sleb)) { + sleb = ubifs_recover_leb(c, lnum, 0, c->sbuf, 0); + if (IS_ERR(sleb)) { + err = PTR_ERR(sleb); + break; + } + } + err = do_kill_orphans(c, sleb, &last_cmt_no, &outofdate, + &last_flagged); + if (err || outofdate) { + ubifs_scan_destroy(sleb); + break; + } + if (sleb->endpt) { + c->ohead_lnum = lnum; + c->ohead_offs = sleb->endpt; + } + ubifs_scan_destroy(sleb); + } + return err; +} + +/** + * ubifs_mount_orphans - delete orphan inodes and erase LEBs that recorded them. + * @c: UBIFS file-system description object + * @unclean: indicates recovery from unclean unmount + * @read_only: indicates read only mount + * + * This function is called when mounting to erase orphans from the previous + * session. If UBIFS was not unmounted cleanly, then the inodes recorded as + * orphans are deleted. + */ +int ubifs_mount_orphans(struct ubifs_info *c, int unclean, int read_only) +{ + int err = 0; + + c->max_orphans = tot_avail_orphs(c); + + if (!read_only) { + c->orph_buf = vmalloc(c->leb_size); + if (!c->orph_buf) + return -ENOMEM; + } + + if (unclean) + err = kill_orphans(c); + else if (!read_only) + err = clear_orphans(c); + + return err; +} + +#ifdef CONFIG_UBIFS_FS_DEBUG + +struct check_orphan { + struct rb_node rb; + ino_t inum; +}; + +struct check_info { + unsigned long last_ino; + unsigned long tot_inos; + unsigned long missing; + unsigned long long leaf_cnt; + struct ubifs_ino_node *node; + struct rb_root root; +}; + +static int dbg_find_orphan(struct ubifs_info *c, ino_t inum) +{ + struct ubifs_orphan *o; + struct rb_node *p; + + spin_lock(&c->orphan_lock); + p = c->orph_tree.rb_node; + while (p) { + o = rb_entry(p, struct ubifs_orphan, rb); + if (inum < o->inum) + p = p->rb_left; + else if (inum > o->inum) + p = p->rb_right; + else { + spin_unlock(&c->orphan_lock); + return 1; + } + } + spin_unlock(&c->orphan_lock); + return 0; +} + +static int dbg_ins_check_orphan(struct rb_root *root, ino_t inum) +{ + struct check_orphan *orphan, *o; + struct rb_node **p, *parent = NULL; + + orphan = kzalloc(sizeof(struct check_orphan), GFP_NOFS); + if (!orphan) + return -ENOMEM; + orphan->inum = inum; + + p = &root->rb_node; + while (*p) { + parent = *p; + o = rb_entry(parent, struct check_orphan, rb); + if (inum < o->inum) + p = &(*p)->rb_left; + else if (inum > o->inum) + p = &(*p)->rb_right; + else { + kfree(orphan); + return 0; + } + } + rb_link_node(&orphan->rb, parent, p); + rb_insert_color(&orphan->rb, root); + return 0; +} + +static int dbg_find_check_orphan(struct rb_root *root, ino_t inum) +{ + struct check_orphan *o; + struct rb_node *p; + + p = root->rb_node; + while (p) { + o = rb_entry(p, struct check_orphan, rb); + if (inum < o->inum) + p = p->rb_left; + else if (inum > o->inum) + p = p->rb_right; + else + return 1; + } + return 0; +} + +static void dbg_free_check_tree(struct rb_root *root) +{ + struct rb_node *this = root->rb_node; + struct check_orphan *o; + + while (this) { + if (this->rb_left) { + this = this->rb_left; + continue; + } else if (this->rb_right) { + this = this->rb_right; + continue; + } + o = rb_entry(this, struct check_orphan, rb); + this = rb_parent(this); + if (this) { + if (this->rb_left == &o->rb) + this->rb_left = NULL; + else + this->rb_right = NULL; + } + kfree(o); + } +} + +static int dbg_orphan_check(struct ubifs_info *c, struct ubifs_zbranch *zbr, + void *priv) +{ + struct check_info *ci = priv; + ino_t inum; + int err; + + inum = key_inum(c, &zbr->key); + if (inum != ci->last_ino) { + /* Lowest node type is the inode node, so it comes first */ + if (key_type(c, &zbr->key) != UBIFS_INO_KEY) + ubifs_err("found orphan node ino %lu, type %d", inum, + key_type(c, &zbr->key)); + ci->last_ino = inum; + ci->tot_inos += 1; + err = ubifs_tnc_read_node(c, zbr, ci->node); + if (err) { + ubifs_err("node read failed, error %d", err); + return err; + } + if (ci->node->nlink == 0) + /* Must be recorded as an orphan */ + if (!dbg_find_check_orphan(&ci->root, inum) && + !dbg_find_orphan(c, inum)) { + ubifs_err("missing orphan, ino %lu", inum); + ci->missing += 1; + } + } + ci->leaf_cnt += 1; + return 0; +} + +static int dbg_read_orphans(struct check_info *ci, struct ubifs_scan_leb *sleb) +{ + struct ubifs_scan_node *snod; + struct ubifs_orph_node *orph; + ino_t inum; + int i, n, err; + + list_for_each_entry(snod, &sleb->nodes, list) { + cond_resched(); + if (snod->type != UBIFS_ORPH_NODE) + continue; + orph = snod->node; + n = (le32_to_cpu(orph->ch.len) - UBIFS_ORPH_NODE_SZ) >> 3; + for (i = 0; i < n; i++) { + inum = le64_to_cpu(orph->inos[i]); + err = dbg_ins_check_orphan(&ci->root, inum); + if (err) + return err; + } + } + return 0; +} + +static int dbg_scan_orphans(struct ubifs_info *c, struct check_info *ci) +{ + int lnum, err = 0; + + /* Check no-orphans flag and skip this if no orphans */ + if (c->no_orphs) + return 0; + + for (lnum = c->orph_first; lnum <= c->orph_last; lnum++) { + struct ubifs_scan_leb *sleb; + + sleb = ubifs_scan(c, lnum, 0, c->dbg_buf); + if (IS_ERR(sleb)) { + err = PTR_ERR(sleb); + break; + } + + err = dbg_read_orphans(ci, sleb); + ubifs_scan_destroy(sleb); + if (err) + break; + } + + return err; +} + +static int dbg_check_orphans(struct ubifs_info *c) +{ + struct check_info ci; + int err; + + if (!(ubifs_chk_flags & UBIFS_CHK_ORPH)) + return 0; + + ci.last_ino = 0; + ci.tot_inos = 0; + ci.missing = 0; + ci.leaf_cnt = 0; + ci.root = RB_ROOT; + ci.node = kmalloc(UBIFS_MAX_INO_NODE_SZ, GFP_NOFS); + if (!ci.node) { + ubifs_err("out of memory"); + return -ENOMEM; + } + + err = dbg_scan_orphans(c, &ci); + if (err) + goto out; + + err = dbg_walk_index(c, &dbg_orphan_check, NULL, &ci); + if (err) { + ubifs_err("cannot scan TNC, error %d", err); + goto out; + } + + if (ci.missing) { + ubifs_err("%lu missing orphan(s)", ci.missing); + err = -EINVAL; + goto out; + } + + dbg_cmt("last inode number is %lu", ci.last_ino); + dbg_cmt("total number of inodes is %lu", ci.tot_inos); + dbg_cmt("total number of leaf nodes is %llu", ci.leaf_cnt); + +out: + dbg_free_check_tree(&ci.root); + kfree(ci.node); + return err; +} + +#endif /* CONFIG_UBIFS_FS_DEBUG */ diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c new file mode 100644 index 000000000000..77d26c141cf6 --- /dev/null +++ b/fs/ubifs/recovery.c @@ -0,0 +1,1519 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Adrian Hunter + * Artem Bityutskiy (Битюцкий Артём) + */ + +/* + * This file implements functions needed to recover from unclean un-mounts. + * When UBIFS is mounted, it checks a flag on the master node to determine if + * an un-mount was completed sucessfully. If not, the process of mounting + * incorparates additional checking and fixing of on-flash data structures. + * UBIFS always cleans away all remnants of an unclean un-mount, so that + * errors do not accumulate. However UBIFS defers recovery if it is mounted + * read-only, and the flash is not modified in that case. + */ + +#include +#include "ubifs.h" + +/** + * is_empty - determine whether a buffer is empty (contains all 0xff). + * @buf: buffer to clean + * @len: length of buffer + * + * This function returns %1 if the buffer is empty (contains all 0xff) otherwise + * %0 is returned. + */ +static int is_empty(void *buf, int len) +{ + uint8_t *p = buf; + int i; + + for (i = 0; i < len; i++) + if (*p++ != 0xff) + return 0; + return 1; +} + +/** + * get_master_node - get the last valid master node allowing for corruption. + * @c: UBIFS file-system description object + * @lnum: LEB number + * @pbuf: buffer containing the LEB read, is returned here + * @mst: master node, if found, is returned here + * @cor: corruption, if found, is returned here + * + * This function allocates a buffer, reads the LEB into it, and finds and + * returns the last valid master node allowing for one area of corruption. + * The corrupt area, if there is one, must be consistent with the assumption + * that it is the result of an unclean unmount while the master node was being + * written. Under those circumstances, it is valid to use the previously written + * master node. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int get_master_node(const struct ubifs_info *c, int lnum, void **pbuf, + struct ubifs_mst_node **mst, void **cor) +{ + const int sz = c->mst_node_alsz; + int err, offs, len; + void *sbuf, *buf; + + sbuf = vmalloc(c->leb_size); + if (!sbuf) + return -ENOMEM; + + err = ubi_read(c->ubi, lnum, sbuf, 0, c->leb_size); + if (err && err != -EBADMSG) + goto out_free; + + /* Find the first position that is definitely not a node */ + offs = 0; + buf = sbuf; + len = c->leb_size; + while (offs + UBIFS_MST_NODE_SZ <= c->leb_size) { + struct ubifs_ch *ch = buf; + + if (le32_to_cpu(ch->magic) != UBIFS_NODE_MAGIC) + break; + offs += sz; + buf += sz; + len -= sz; + } + /* See if there was a valid master node before that */ + if (offs) { + int ret; + + offs -= sz; + buf -= sz; + len += sz; + ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 1); + if (ret != SCANNED_A_NODE && offs) { + /* Could have been corruption so check one place back */ + offs -= sz; + buf -= sz; + len += sz; + ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 1); + if (ret != SCANNED_A_NODE) + /* + * We accept only one area of corruption because + * we are assuming that it was caused while + * trying to write a master node. + */ + goto out_err; + } + if (ret == SCANNED_A_NODE) { + struct ubifs_ch *ch = buf; + + if (ch->node_type != UBIFS_MST_NODE) + goto out_err; + dbg_rcvry("found a master node at %d:%d", lnum, offs); + *mst = buf; + offs += sz; + buf += sz; + len -= sz; + } + } + /* Check for corruption */ + if (offs < c->leb_size) { + if (!is_empty(buf, min_t(int, len, sz))) { + *cor = buf; + dbg_rcvry("found corruption at %d:%d", lnum, offs); + } + offs += sz; + buf += sz; + len -= sz; + } + /* Check remaining empty space */ + if (offs < c->leb_size) + if (!is_empty(buf, len)) + goto out_err; + *pbuf = sbuf; + return 0; + +out_err: + err = -EINVAL; +out_free: + vfree(sbuf); + *mst = NULL; + *cor = NULL; + return err; +} + +/** + * write_rcvrd_mst_node - write recovered master node. + * @c: UBIFS file-system description object + * @mst: master node + * + * This function returns %0 on success and a negative error code on failure. + */ +static int write_rcvrd_mst_node(struct ubifs_info *c, + struct ubifs_mst_node *mst) +{ + int err = 0, lnum = UBIFS_MST_LNUM, sz = c->mst_node_alsz; + uint32_t save_flags; + + dbg_rcvry("recovery"); + + save_flags = mst->flags; + mst->flags = cpu_to_le32(le32_to_cpu(mst->flags) | UBIFS_MST_RCVRY); + + ubifs_prepare_node(c, mst, UBIFS_MST_NODE_SZ, 1); + err = ubi_leb_change(c->ubi, lnum, mst, sz, UBI_SHORTTERM); + if (err) + goto out; + err = ubi_leb_change(c->ubi, lnum + 1, mst, sz, UBI_SHORTTERM); + if (err) + goto out; +out: + mst->flags = save_flags; + return err; +} + +/** + * ubifs_recover_master_node - recover the master node. + * @c: UBIFS file-system description object + * + * This function recovers the master node from corruption that may occur due to + * an unclean unmount. + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_recover_master_node(struct ubifs_info *c) +{ + void *buf1 = NULL, *buf2 = NULL, *cor1 = NULL, *cor2 = NULL; + struct ubifs_mst_node *mst1 = NULL, *mst2 = NULL, *mst; + const int sz = c->mst_node_alsz; + int err, offs1, offs2; + + dbg_rcvry("recovery"); + + err = get_master_node(c, UBIFS_MST_LNUM, &buf1, &mst1, &cor1); + if (err) + goto out_free; + + err = get_master_node(c, UBIFS_MST_LNUM + 1, &buf2, &mst2, &cor2); + if (err) + goto out_free; + + if (mst1) { + offs1 = (void *)mst1 - buf1; + if ((le32_to_cpu(mst1->flags) & UBIFS_MST_RCVRY) && + (offs1 == 0 && !cor1)) { + /* + * mst1 was written by recovery at offset 0 with no + * corruption. + */ + dbg_rcvry("recovery recovery"); + mst = mst1; + } else if (mst2) { + offs2 = (void *)mst2 - buf2; + if (offs1 == offs2) { + /* Same offset, so must be the same */ + if (memcmp((void *)mst1 + UBIFS_CH_SZ, + (void *)mst2 + UBIFS_CH_SZ, + UBIFS_MST_NODE_SZ - UBIFS_CH_SZ)) + goto out_err; + mst = mst1; + } else if (offs2 + sz == offs1) { + /* 1st LEB was written, 2nd was not */ + if (cor1) + goto out_err; + mst = mst1; + } else if (offs1 == 0 && offs2 + sz >= c->leb_size) { + /* 1st LEB was unmapped and written, 2nd not */ + if (cor1) + goto out_err; + mst = mst1; + } else + goto out_err; + } else { + /* + * 2nd LEB was unmapped and about to be written, so + * there must be only one master node in the first LEB + * and no corruption. + */ + if (offs1 != 0 || cor1) + goto out_err; + mst = mst1; + } + } else { + if (!mst2) + goto out_err; + /* + * 1st LEB was unmapped and about to be written, so there must + * be no room left in 2nd LEB. + */ + offs2 = (void *)mst2 - buf2; + if (offs2 + sz + sz <= c->leb_size) + goto out_err; + mst = mst2; + } + + dbg_rcvry("recovered master node from LEB %d", + (mst == mst1 ? UBIFS_MST_LNUM : UBIFS_MST_LNUM + 1)); + + memcpy(c->mst_node, mst, UBIFS_MST_NODE_SZ); + + if ((c->vfs_sb->s_flags & MS_RDONLY)) { + /* Read-only mode. Keep a copy for switching to rw mode */ + c->rcvrd_mst_node = kmalloc(sz, GFP_KERNEL); + if (!c->rcvrd_mst_node) { + err = -ENOMEM; + goto out_free; + } + memcpy(c->rcvrd_mst_node, c->mst_node, UBIFS_MST_NODE_SZ); + } else { + /* Write the recovered master node */ + c->max_sqnum = le64_to_cpu(mst->ch.sqnum) - 1; + err = write_rcvrd_mst_node(c, c->mst_node); + if (err) + goto out_free; + } + + vfree(buf2); + vfree(buf1); + + return 0; + +out_err: + err = -EINVAL; +out_free: + ubifs_err("failed to recover master node"); + if (mst1) { + dbg_err("dumping first master node"); + dbg_dump_node(c, mst1); + } + if (mst2) { + dbg_err("dumping second master node"); + dbg_dump_node(c, mst2); + } + vfree(buf2); + vfree(buf1); + return err; +} + +/** + * ubifs_write_rcvrd_mst_node - write the recovered master node. + * @c: UBIFS file-system description object + * + * This function writes the master node that was recovered during mounting in + * read-only mode and must now be written because we are remounting rw. + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_write_rcvrd_mst_node(struct ubifs_info *c) +{ + int err; + + if (!c->rcvrd_mst_node) + return 0; + c->rcvrd_mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY); + c->mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY); + err = write_rcvrd_mst_node(c, c->rcvrd_mst_node); + if (err) + return err; + kfree(c->rcvrd_mst_node); + c->rcvrd_mst_node = NULL; + return 0; +} + +/** + * is_last_write - determine if an offset was in the last write to a LEB. + * @c: UBIFS file-system description object + * @buf: buffer to check + * @offs: offset to check + * + * This function returns %1 if @offs was in the last write to the LEB whose data + * is in @buf, otherwise %0 is returned. The determination is made by checking + * for subsequent empty space starting from the next min_io_size boundary (or a + * bit less than the common header size if min_io_size is one). + */ +static int is_last_write(const struct ubifs_info *c, void *buf, int offs) +{ + int empty_offs; + int check_len; + uint8_t *p; + + if (c->min_io_size == 1) { + check_len = c->leb_size - offs; + p = buf + check_len; + for (; check_len > 0; check_len--) + if (*--p != 0xff) + break; + /* + * 'check_len' is the size of the corruption which cannot be + * more than the size of 1 node if it was caused by an unclean + * unmount. + */ + if (check_len > UBIFS_MAX_NODE_SZ) + return 0; + return 1; + } + + /* + * Round up to the next c->min_io_size boundary i.e. 'offs' is in the + * last wbuf written. After that should be empty space. + */ + empty_offs = ALIGN(offs + 1, c->min_io_size); + check_len = c->leb_size - empty_offs; + p = buf + empty_offs - offs; + + for (; check_len > 0; check_len--) + if (*p++ != 0xff) + return 0; + return 1; +} + +/** + * clean_buf - clean the data from an LEB sitting in a buffer. + * @c: UBIFS file-system description object + * @buf: buffer to clean + * @lnum: LEB number to clean + * @offs: offset from which to clean + * @len: length of buffer + * + * This function pads up to the next min_io_size boundary (if there is one) and + * sets empty space to all 0xff. @buf, @offs and @len are updated to the next + * min_io_size boundary (if there is one). + */ +static void clean_buf(const struct ubifs_info *c, void **buf, int lnum, + int *offs, int *len) +{ + int empty_offs, pad_len; + + lnum = lnum; + dbg_rcvry("cleaning corruption at %d:%d", lnum, *offs); + + if (c->min_io_size == 1) { + memset(*buf, 0xff, c->leb_size - *offs); + return; + } + + ubifs_assert(!(*offs & 7)); + empty_offs = ALIGN(*offs, c->min_io_size); + pad_len = empty_offs - *offs; + ubifs_pad(c, *buf, pad_len); + *offs += pad_len; + *buf += pad_len; + *len -= pad_len; + memset(*buf, 0xff, c->leb_size - empty_offs); +} + +/** + * no_more_nodes - determine if there are no more nodes in a buffer. + * @c: UBIFS file-system description object + * @buf: buffer to check + * @len: length of buffer + * @lnum: LEB number of the LEB from which @buf was read + * @offs: offset from which @buf was read + * + * This function scans @buf for more nodes and returns %0 is a node is found and + * %1 if no more nodes are found. + */ +static int no_more_nodes(const struct ubifs_info *c, void *buf, int len, + int lnum, int offs) +{ + int skip, next_offs = 0; + + if (len > UBIFS_DATA_NODE_SZ) { + struct ubifs_ch *ch = buf; + int dlen = le32_to_cpu(ch->len); + + if (ch->node_type == UBIFS_DATA_NODE && dlen >= UBIFS_CH_SZ && + dlen <= UBIFS_MAX_DATA_NODE_SZ) + /* The corrupt node looks like a data node */ + next_offs = ALIGN(offs + dlen, 8); + } + + if (c->min_io_size == 1) + skip = 8; + else + skip = ALIGN(offs + 1, c->min_io_size) - offs; + + offs += skip; + buf += skip; + len -= skip; + while (len > 8) { + struct ubifs_ch *ch = buf; + uint32_t magic = le32_to_cpu(ch->magic); + int ret; + + if (magic == UBIFS_NODE_MAGIC) { + ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 1); + if (ret == SCANNED_A_NODE || ret > 0) { + /* + * There is a small chance this is just data in + * a data node, so check that possibility. e.g. + * this is part of a file that itself contains + * a UBIFS image. + */ + if (next_offs && offs + le32_to_cpu(ch->len) <= + next_offs) + continue; + dbg_rcvry("unexpected node at %d:%d", lnum, + offs); + return 0; + } + } + offs += 8; + buf += 8; + len -= 8; + } + return 1; +} + +/** + * fix_unclean_leb - fix an unclean LEB. + * @c: UBIFS file-system description object + * @sleb: scanned LEB information + * @start: offset where scan started + */ +static int fix_unclean_leb(struct ubifs_info *c, struct ubifs_scan_leb *sleb, + int start) +{ + int lnum = sleb->lnum, endpt = start; + + /* Get the end offset of the last node we are keeping */ + if (!list_empty(&sleb->nodes)) { + struct ubifs_scan_node *snod; + + snod = list_entry(sleb->nodes.prev, + struct ubifs_scan_node, list); + endpt = snod->offs + snod->len; + } + + if ((c->vfs_sb->s_flags & MS_RDONLY) && !c->remounting_rw) { + /* Add to recovery list */ + struct ubifs_unclean_leb *ucleb; + + dbg_rcvry("need to fix LEB %d start %d endpt %d", + lnum, start, sleb->endpt); + ucleb = kzalloc(sizeof(struct ubifs_unclean_leb), GFP_NOFS); + if (!ucleb) + return -ENOMEM; + ucleb->lnum = lnum; + ucleb->endpt = endpt; + list_add_tail(&ucleb->list, &c->unclean_leb_list); + } else { + /* Write the fixed LEB back to flash */ + int err; + + dbg_rcvry("fixing LEB %d start %d endpt %d", + lnum, start, sleb->endpt); + if (endpt == 0) { + err = ubifs_leb_unmap(c, lnum); + if (err) + return err; + } else { + int len = ALIGN(endpt, c->min_io_size); + + if (start) { + err = ubi_read(c->ubi, lnum, sleb->buf, 0, + start); + if (err) + return err; + } + /* Pad to min_io_size */ + if (len > endpt) { + int pad_len = len - ALIGN(endpt, 8); + + if (pad_len > 0) { + void *buf = sleb->buf + len - pad_len; + + ubifs_pad(c, buf, pad_len); + } + } + err = ubi_leb_change(c->ubi, lnum, sleb->buf, len, + UBI_UNKNOWN); + if (err) + return err; + } + } + return 0; +} + +/** + * drop_incomplete_group - drop nodes from an incomplete group. + * @sleb: scanned LEB information + * @offs: offset of dropped nodes is returned here + * + * This function returns %1 if nodes are dropped and %0 otherwise. + */ +static int drop_incomplete_group(struct ubifs_scan_leb *sleb, int *offs) +{ + int dropped = 0; + + while (!list_empty(&sleb->nodes)) { + struct ubifs_scan_node *snod; + struct ubifs_ch *ch; + + snod = list_entry(sleb->nodes.prev, struct ubifs_scan_node, + list); + ch = snod->node; + if (ch->group_type != UBIFS_IN_NODE_GROUP) + return dropped; + dbg_rcvry("dropping node at %d:%d", sleb->lnum, snod->offs); + *offs = snod->offs; + list_del(&snod->list); + kfree(snod); + sleb->nodes_cnt -= 1; + dropped = 1; + } + return dropped; +} + +/** + * ubifs_recover_leb - scan and recover a LEB. + * @c: UBIFS file-system description object + * @lnum: LEB number + * @offs: offset + * @sbuf: LEB-sized buffer to use + * @grouped: nodes may be grouped for recovery + * + * This function does a scan of a LEB, but caters for errors that might have + * been caused by the unclean unmount from which we are attempting to recover. + * + * This function returns %0 on success and a negative error code on failure. + */ +struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum, + int offs, void *sbuf, int grouped) +{ + int err, len = c->leb_size - offs, need_clean = 0, quiet = 1; + int empty_chkd = 0, start = offs; + struct ubifs_scan_leb *sleb; + void *buf = sbuf + offs; + + dbg_rcvry("%d:%d", lnum, offs); + + sleb = ubifs_start_scan(c, lnum, offs, sbuf); + if (IS_ERR(sleb)) + return sleb; + + if (sleb->ecc) + need_clean = 1; + + while (len >= 8) { + int ret; + + dbg_scan("look at LEB %d:%d (%d bytes left)", + lnum, offs, len); + + cond_resched(); + + /* + * Scan quietly until there is an error from which we cannot + * recover + */ + ret = ubifs_scan_a_node(c, buf, len, lnum, offs, quiet); + + if (ret == SCANNED_A_NODE) { + /* A valid node, and not a padding node */ + struct ubifs_ch *ch = buf; + int node_len; + + err = ubifs_add_snod(c, sleb, buf, offs); + if (err) + goto error; + node_len = ALIGN(le32_to_cpu(ch->len), 8); + offs += node_len; + buf += node_len; + len -= node_len; + continue; + } + + if (ret > 0) { + /* Padding bytes or a valid padding node */ + offs += ret; + buf += ret; + len -= ret; + continue; + } + + if (ret == SCANNED_EMPTY_SPACE) { + if (!is_empty(buf, len)) { + if (!is_last_write(c, buf, offs)) + break; + clean_buf(c, &buf, lnum, &offs, &len); + need_clean = 1; + } + empty_chkd = 1; + break; + } + + if (ret == SCANNED_GARBAGE || ret == SCANNED_A_BAD_PAD_NODE) + if (is_last_write(c, buf, offs)) { + clean_buf(c, &buf, lnum, &offs, &len); + need_clean = 1; + empty_chkd = 1; + break; + } + + if (ret == SCANNED_A_CORRUPT_NODE) + if (no_more_nodes(c, buf, len, lnum, offs)) { + clean_buf(c, &buf, lnum, &offs, &len); + need_clean = 1; + empty_chkd = 1; + break; + } + + if (quiet) { + /* Redo the last scan but noisily */ + quiet = 0; + continue; + } + + switch (ret) { + case SCANNED_GARBAGE: + dbg_err("garbage"); + goto corrupted; + case SCANNED_A_CORRUPT_NODE: + case SCANNED_A_BAD_PAD_NODE: + dbg_err("bad node"); + goto corrupted; + default: + dbg_err("unknown"); + goto corrupted; + } + } + + if (!empty_chkd && !is_empty(buf, len)) { + if (is_last_write(c, buf, offs)) { + clean_buf(c, &buf, lnum, &offs, &len); + need_clean = 1; + } else { + ubifs_err("corrupt empty space at LEB %d:%d", + lnum, offs); + goto corrupted; + } + } + + /* Drop nodes from incomplete group */ + if (grouped && drop_incomplete_group(sleb, &offs)) { + buf = sbuf + offs; + len = c->leb_size - offs; + clean_buf(c, &buf, lnum, &offs, &len); + need_clean = 1; + } + + if (offs % c->min_io_size) { + clean_buf(c, &buf, lnum, &offs, &len); + need_clean = 1; + } + + ubifs_end_scan(c, sleb, lnum, offs); + + if (need_clean) { + err = fix_unclean_leb(c, sleb, start); + if (err) + goto error; + } + + return sleb; + +corrupted: + ubifs_scanned_corruption(c, lnum, offs, buf); + err = -EUCLEAN; +error: + ubifs_err("LEB %d scanning failed", lnum); + ubifs_scan_destroy(sleb); + return ERR_PTR(err); +} + +/** + * get_cs_sqnum - get commit start sequence number. + * @c: UBIFS file-system description object + * @lnum: LEB number of commit start node + * @offs: offset of commit start node + * @cs_sqnum: commit start sequence number is returned here + * + * This function returns %0 on success and a negative error code on failure. + */ +static int get_cs_sqnum(struct ubifs_info *c, int lnum, int offs, + unsigned long long *cs_sqnum) +{ + struct ubifs_cs_node *cs_node = NULL; + int err, ret; + + dbg_rcvry("at %d:%d", lnum, offs); + cs_node = kmalloc(UBIFS_CS_NODE_SZ, GFP_KERNEL); + if (!cs_node) + return -ENOMEM; + if (c->leb_size - offs < UBIFS_CS_NODE_SZ) + goto out_err; + err = ubi_read(c->ubi, lnum, (void *)cs_node, offs, UBIFS_CS_NODE_SZ); + if (err && err != -EBADMSG) + goto out_free; + ret = ubifs_scan_a_node(c, cs_node, UBIFS_CS_NODE_SZ, lnum, offs, 0); + if (ret != SCANNED_A_NODE) { + dbg_err("Not a valid node"); + goto out_err; + } + if (cs_node->ch.node_type != UBIFS_CS_NODE) { + dbg_err("Node a CS node, type is %d", cs_node->ch.node_type); + goto out_err; + } + if (le64_to_cpu(cs_node->cmt_no) != c->cmt_no) { + dbg_err("CS node cmt_no %llu != current cmt_no %llu", + (unsigned long long)le64_to_cpu(cs_node->cmt_no), + c->cmt_no); + goto out_err; + } + *cs_sqnum = le64_to_cpu(cs_node->ch.sqnum); + dbg_rcvry("commit start sqnum %llu", *cs_sqnum); + kfree(cs_node); + return 0; + +out_err: + err = -EINVAL; +out_free: + ubifs_err("failed to get CS sqnum"); + kfree(cs_node); + return err; +} + +/** + * ubifs_recover_log_leb - scan and recover a log LEB. + * @c: UBIFS file-system description object + * @lnum: LEB number + * @offs: offset + * @sbuf: LEB-sized buffer to use + * + * This function does a scan of a LEB, but caters for errors that might have + * been caused by the unclean unmount from which we are attempting to recover. + * + * This function returns %0 on success and a negative error code on failure. + */ +struct ubifs_scan_leb *ubifs_recover_log_leb(struct ubifs_info *c, int lnum, + int offs, void *sbuf) +{ + struct ubifs_scan_leb *sleb; + int next_lnum; + + dbg_rcvry("LEB %d", lnum); + next_lnum = lnum + 1; + if (next_lnum >= UBIFS_LOG_LNUM + c->log_lebs) + next_lnum = UBIFS_LOG_LNUM; + if (next_lnum != c->ltail_lnum) { + /* + * We can only recover at the end of the log, so check that the + * next log LEB is empty or out of date. + */ + sleb = ubifs_scan(c, next_lnum, 0, sbuf); + if (IS_ERR(sleb)) + return sleb; + if (sleb->nodes_cnt) { + struct ubifs_scan_node *snod; + unsigned long long cs_sqnum = c->cs_sqnum; + + snod = list_entry(sleb->nodes.next, + struct ubifs_scan_node, list); + if (cs_sqnum == 0) { + int err; + + err = get_cs_sqnum(c, lnum, offs, &cs_sqnum); + if (err) { + ubifs_scan_destroy(sleb); + return ERR_PTR(err); + } + } + if (snod->sqnum > cs_sqnum) { + ubifs_err("unrecoverable log corruption " + "in LEB %d", lnum); + ubifs_scan_destroy(sleb); + return ERR_PTR(-EUCLEAN); + } + } + ubifs_scan_destroy(sleb); + } + return ubifs_recover_leb(c, lnum, offs, sbuf, 0); +} + +/** + * recover_head - recover a head. + * @c: UBIFS file-system description object + * @lnum: LEB number of head to recover + * @offs: offset of head to recover + * @sbuf: LEB-sized buffer to use + * + * This function ensures that there is no data on the flash at a head location. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int recover_head(const struct ubifs_info *c, int lnum, int offs, + void *sbuf) +{ + int len, err, need_clean = 0; + + if (c->min_io_size > 1) + len = c->min_io_size; + else + len = 512; + if (offs + len > c->leb_size) + len = c->leb_size - offs; + + if (!len) + return 0; + + /* Read at the head location and check it is empty flash */ + err = ubi_read(c->ubi, lnum, sbuf, offs, len); + if (err) + need_clean = 1; + else { + uint8_t *p = sbuf; + + while (len--) + if (*p++ != 0xff) { + need_clean = 1; + break; + } + } + + if (need_clean) { + dbg_rcvry("cleaning head at %d:%d", lnum, offs); + if (offs == 0) + return ubifs_leb_unmap(c, lnum); + err = ubi_read(c->ubi, lnum, sbuf, 0, offs); + if (err) + return err; + return ubi_leb_change(c->ubi, lnum, sbuf, offs, UBI_UNKNOWN); + } + + return 0; +} + +/** + * ubifs_recover_inl_heads - recover index and LPT heads. + * @c: UBIFS file-system description object + * @sbuf: LEB-sized buffer to use + * + * This function ensures that there is no data on the flash at the index and + * LPT head locations. + * + * This deals with the recovery of a half-completed journal commit. UBIFS is + * careful never to overwrite the last version of the index or the LPT. Because + * the index and LPT are wandering trees, data from a half-completed commit will + * not be referenced anywhere in UBIFS. The data will be either in LEBs that are + * assumed to be empty and will be unmapped anyway before use, or in the index + * and LPT heads. + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_recover_inl_heads(const struct ubifs_info *c, void *sbuf) +{ + int err; + + ubifs_assert(!(c->vfs_sb->s_flags & MS_RDONLY) || c->remounting_rw); + + dbg_rcvry("checking index head at %d:%d", c->ihead_lnum, c->ihead_offs); + err = recover_head(c, c->ihead_lnum, c->ihead_offs, sbuf); + if (err) + return err; + + dbg_rcvry("checking LPT head at %d:%d", c->nhead_lnum, c->nhead_offs); + err = recover_head(c, c->nhead_lnum, c->nhead_offs, sbuf); + if (err) + return err; + + return 0; +} + +/** + * clean_an_unclean_leb - read and write a LEB to remove corruption. + * @c: UBIFS file-system description object + * @ucleb: unclean LEB information + * @sbuf: LEB-sized buffer to use + * + * This function reads a LEB up to a point pre-determined by the mount recovery, + * checks the nodes, and writes the result back to the flash, thereby cleaning + * off any following corruption, or non-fatal ECC errors. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int clean_an_unclean_leb(const struct ubifs_info *c, + struct ubifs_unclean_leb *ucleb, void *sbuf) +{ + int err, lnum = ucleb->lnum, offs = 0, len = ucleb->endpt, quiet = 1; + void *buf = sbuf; + + dbg_rcvry("LEB %d len %d", lnum, len); + + if (len == 0) { + /* Nothing to read, just unmap it */ + err = ubifs_leb_unmap(c, lnum); + if (err) + return err; + return 0; + } + + err = ubi_read(c->ubi, lnum, buf, offs, len); + if (err && err != -EBADMSG) + return err; + + while (len >= 8) { + int ret; + + cond_resched(); + + /* Scan quietly until there is an error */ + ret = ubifs_scan_a_node(c, buf, len, lnum, offs, quiet); + + if (ret == SCANNED_A_NODE) { + /* A valid node, and not a padding node */ + struct ubifs_ch *ch = buf; + int node_len; + + node_len = ALIGN(le32_to_cpu(ch->len), 8); + offs += node_len; + buf += node_len; + len -= node_len; + continue; + } + + if (ret > 0) { + /* Padding bytes or a valid padding node */ + offs += ret; + buf += ret; + len -= ret; + continue; + } + + if (ret == SCANNED_EMPTY_SPACE) { + ubifs_err("unexpected empty space at %d:%d", + lnum, offs); + return -EUCLEAN; + } + + if (quiet) { + /* Redo the last scan but noisily */ + quiet = 0; + continue; + } + + ubifs_scanned_corruption(c, lnum, offs, buf); + return -EUCLEAN; + } + + /* Pad to min_io_size */ + len = ALIGN(ucleb->endpt, c->min_io_size); + if (len > ucleb->endpt) { + int pad_len = len - ALIGN(ucleb->endpt, 8); + + if (pad_len > 0) { + buf = c->sbuf + len - pad_len; + ubifs_pad(c, buf, pad_len); + } + } + + /* Write back the LEB atomically */ + err = ubi_leb_change(c->ubi, lnum, sbuf, len, UBI_UNKNOWN); + if (err) + return err; + + dbg_rcvry("cleaned LEB %d", lnum); + + return 0; +} + +/** + * ubifs_clean_lebs - clean LEBs recovered during read-only mount. + * @c: UBIFS file-system description object + * @sbuf: LEB-sized buffer to use + * + * This function cleans a LEB identified during recovery that needs to be + * written but was not because UBIFS was mounted read-only. This happens when + * remounting to read-write mode. + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_clean_lebs(const struct ubifs_info *c, void *sbuf) +{ + dbg_rcvry("recovery"); + while (!list_empty(&c->unclean_leb_list)) { + struct ubifs_unclean_leb *ucleb; + int err; + + ucleb = list_entry(c->unclean_leb_list.next, + struct ubifs_unclean_leb, list); + err = clean_an_unclean_leb(c, ucleb, sbuf); + if (err) + return err; + list_del(&ucleb->list); + kfree(ucleb); + } + return 0; +} + +/** + * ubifs_rcvry_gc_commit - recover the GC LEB number and run the commit. + * @c: UBIFS file-system description object + * + * Out-of-place garbage collection requires always one empty LEB with which to + * start garbage collection. The LEB number is recorded in c->gc_lnum and is + * written to the master node on unmounting. In the case of an unclean unmount + * the value of gc_lnum recorded in the master node is out of date and cannot + * be used. Instead, recovery must allocate an empty LEB for this purpose. + * However, there may not be enough empty space, in which case it must be + * possible to GC the dirtiest LEB into the GC head LEB. + * + * This function also runs the commit which causes the TNC updates from + * size-recovery and orphans to be written to the flash. That is important to + * ensure correct replay order for subsequent mounts. + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_rcvry_gc_commit(struct ubifs_info *c) +{ + struct ubifs_wbuf *wbuf = &c->jheads[GCHD].wbuf; + struct ubifs_lprops lp; + int lnum, err; + + c->gc_lnum = -1; + if (wbuf->lnum == -1) { + dbg_rcvry("no GC head LEB"); + goto find_free; + } + /* + * See whether the used space in the dirtiest LEB fits in the GC head + * LEB. + */ + if (wbuf->offs == c->leb_size) { + dbg_rcvry("no room in GC head LEB"); + goto find_free; + } + err = ubifs_find_dirty_leb(c, &lp, wbuf->offs, 2); + if (err) { + if (err == -ENOSPC) + dbg_err("could not find a dirty LEB"); + return err; + } + ubifs_assert(!(lp.flags & LPROPS_INDEX)); + lnum = lp.lnum; + if (lp.free + lp.dirty == c->leb_size) { + /* An empty LEB was returned */ + if (lp.free != c->leb_size) { + err = ubifs_change_one_lp(c, lnum, c->leb_size, + 0, 0, 0, 0); + if (err) + return err; + } + err = ubifs_leb_unmap(c, lnum); + if (err) + return err; + c->gc_lnum = lnum; + dbg_rcvry("allocated LEB %d for GC", lnum); + /* Run the commit */ + dbg_rcvry("committing"); + return ubifs_run_commit(c); + } + /* + * There was no empty LEB so the used space in the dirtiest LEB must fit + * in the GC head LEB. + */ + if (lp.free + lp.dirty < wbuf->offs) { + dbg_rcvry("LEB %d doesn't fit in GC head LEB %d:%d", + lnum, wbuf->lnum, wbuf->offs); + err = ubifs_return_leb(c, lnum); + if (err) + return err; + goto find_free; + } + /* + * We run the commit before garbage collection otherwise subsequent + * mounts will see the GC and orphan deletion in a different order. + */ + dbg_rcvry("committing"); + err = ubifs_run_commit(c); + if (err) + return err; + /* + * The data in the dirtiest LEB fits in the GC head LEB, so do the GC + * - use locking to keep 'ubifs_assert()' happy. + */ + dbg_rcvry("GC'ing LEB %d", lnum); + mutex_lock_nested(&wbuf->io_mutex, wbuf->jhead); + err = ubifs_garbage_collect_leb(c, &lp); + if (err >= 0) { + int err2 = ubifs_wbuf_sync_nolock(wbuf); + + if (err2) + err = err2; + } + mutex_unlock(&wbuf->io_mutex); + if (err < 0) { + dbg_err("GC failed, error %d", err); + if (err == -EAGAIN) + err = -EINVAL; + return err; + } + if (err != LEB_RETAINED) { + dbg_err("GC returned %d", err); + return -EINVAL; + } + err = ubifs_leb_unmap(c, c->gc_lnum); + if (err) + return err; + dbg_rcvry("allocated LEB %d for GC", lnum); + return 0; + +find_free: + /* + * There is no GC head LEB or the free space in the GC head LEB is too + * small. Allocate gc_lnum by calling 'ubifs_find_free_leb_for_idx()' so + * GC is not run. + */ + lnum = ubifs_find_free_leb_for_idx(c); + if (lnum < 0) { + dbg_err("could not find an empty LEB"); + return lnum; + } + /* And reset the index flag */ + err = ubifs_change_one_lp(c, lnum, LPROPS_NC, LPROPS_NC, 0, + LPROPS_INDEX, 0); + if (err) + return err; + c->gc_lnum = lnum; + dbg_rcvry("allocated LEB %d for GC", lnum); + /* Run the commit */ + dbg_rcvry("committing"); + return ubifs_run_commit(c); +} + +/** + * struct size_entry - inode size information for recovery. + * @rb: link in the RB-tree of sizes + * @inum: inode number + * @i_size: size on inode + * @d_size: maximum size based on data nodes + * @exists: indicates whether the inode exists + * @inode: inode if pinned in memory awaiting rw mode to fix it + */ +struct size_entry { + struct rb_node rb; + ino_t inum; + loff_t i_size; + loff_t d_size; + int exists; + struct inode *inode; +}; + +/** + * add_ino - add an entry to the size tree. + * @c: UBIFS file-system description object + * @inum: inode number + * @i_size: size on inode + * @d_size: maximum size based on data nodes + * @exists: indicates whether the inode exists + */ +static int add_ino(struct ubifs_info *c, ino_t inum, loff_t i_size, + loff_t d_size, int exists) +{ + struct rb_node **p = &c->size_tree.rb_node, *parent = NULL; + struct size_entry *e; + + while (*p) { + parent = *p; + e = rb_entry(parent, struct size_entry, rb); + if (inum < e->inum) + p = &(*p)->rb_left; + else + p = &(*p)->rb_right; + } + + e = kzalloc(sizeof(struct size_entry), GFP_KERNEL); + if (!e) + return -ENOMEM; + + e->inum = inum; + e->i_size = i_size; + e->d_size = d_size; + e->exists = exists; + + rb_link_node(&e->rb, parent, p); + rb_insert_color(&e->rb, &c->size_tree); + + return 0; +} + +/** + * find_ino - find an entry on the size tree. + * @c: UBIFS file-system description object + * @inum: inode number + */ +static struct size_entry *find_ino(struct ubifs_info *c, ino_t inum) +{ + struct rb_node *p = c->size_tree.rb_node; + struct size_entry *e; + + while (p) { + e = rb_entry(p, struct size_entry, rb); + if (inum < e->inum) + p = p->rb_left; + else if (inum > e->inum) + p = p->rb_right; + else + return e; + } + return NULL; +} + +/** + * remove_ino - remove an entry from the size tree. + * @c: UBIFS file-system description object + * @inum: inode number + */ +static void remove_ino(struct ubifs_info *c, ino_t inum) +{ + struct size_entry *e = find_ino(c, inum); + + if (!e) + return; + rb_erase(&e->rb, &c->size_tree); + kfree(e); +} + +/** + * ubifs_destroy_size_tree - free resources related to the size tree. + * @c: UBIFS file-system description object + */ +void ubifs_destroy_size_tree(struct ubifs_info *c) +{ + struct rb_node *this = c->size_tree.rb_node; + struct size_entry *e; + + while (this) { + if (this->rb_left) { + this = this->rb_left; + continue; + } else if (this->rb_right) { + this = this->rb_right; + continue; + } + e = rb_entry(this, struct size_entry, rb); + if (e->inode) + iput(e->inode); + this = rb_parent(this); + if (this) { + if (this->rb_left == &e->rb) + this->rb_left = NULL; + else + this->rb_right = NULL; + } + kfree(e); + } + c->size_tree = RB_ROOT; +} + +/** + * ubifs_recover_size_accum - accumulate inode sizes for recovery. + * @c: UBIFS file-system description object + * @key: node key + * @deletion: node is for a deletion + * @new_size: inode size + * + * This function has two purposes: + * 1) to ensure there are no data nodes that fall outside the inode size + * 2) to ensure there are no data nodes for inodes that do not exist + * To accomplish those purposes, a rb-tree is constructed containing an entry + * for each inode number in the journal that has not been deleted, and recording + * the size from the inode node, the maximum size of any data node (also altered + * by truncations) and a flag indicating a inode number for which no inode node + * was present in the journal. + * + * Note that there is still the possibility that there are data nodes that have + * been committed that are beyond the inode size, however the only way to find + * them would be to scan the entire index. Alternatively, some provision could + * be made to record the size of inodes at the start of commit, which would seem + * very cumbersome for a scenario that is quite unlikely and the only negative + * consequence of which is wasted space. + * + * This functions returns %0 on success and a negative error code on failure. + */ +int ubifs_recover_size_accum(struct ubifs_info *c, union ubifs_key *key, + int deletion, loff_t new_size) +{ + ino_t inum = key_inum(c, key); + struct size_entry *e; + int err; + + switch (key_type(c, key)) { + case UBIFS_INO_KEY: + if (deletion) + remove_ino(c, inum); + else { + e = find_ino(c, inum); + if (e) { + e->i_size = new_size; + e->exists = 1; + } else { + err = add_ino(c, inum, new_size, 0, 1); + if (err) + return err; + } + } + break; + case UBIFS_DATA_KEY: + e = find_ino(c, inum); + if (e) { + if (new_size > e->d_size) + e->d_size = new_size; + } else { + err = add_ino(c, inum, 0, new_size, 0); + if (err) + return err; + } + break; + case UBIFS_TRUN_KEY: + e = find_ino(c, inum); + if (e) + e->d_size = new_size; + break; + } + return 0; +} + +/** + * fix_size_in_place - fix inode size in place on flash. + * @c: UBIFS file-system description object + * @e: inode size information for recovery + */ +static int fix_size_in_place(struct ubifs_info *c, struct size_entry *e) +{ + struct ubifs_ino_node *ino = c->sbuf; + unsigned char *p; + union ubifs_key key; + int err, lnum, offs, len; + loff_t i_size; + uint32_t crc; + + /* Locate the inode node LEB number and offset */ + ino_key_init(c, &key, e->inum); + err = ubifs_tnc_locate(c, &key, ino, &lnum, &offs); + if (err) + goto out; + /* + * If the size recorded on the inode node is greater than the size that + * was calculated from nodes in the journal then don't change the inode. + */ + i_size = le64_to_cpu(ino->size); + if (i_size >= e->d_size) + return 0; + /* Read the LEB */ + err = ubi_read(c->ubi, lnum, c->sbuf, 0, c->leb_size); + if (err) + goto out; + /* Change the size field and recalculate the CRC */ + ino = c->sbuf + offs; + ino->size = cpu_to_le64(e->d_size); + len = le32_to_cpu(ino->ch.len); + crc = crc32(UBIFS_CRC32_INIT, (void *)ino + 8, len - 8); + ino->ch.crc = cpu_to_le32(crc); + /* Work out where data in the LEB ends and free space begins */ + p = c->sbuf; + len = c->leb_size - 1; + while (p[len] == 0xff) + len -= 1; + len = ALIGN(len + 1, c->min_io_size); + /* Atomically write the fixed LEB back again */ + err = ubi_leb_change(c->ubi, lnum, c->sbuf, len, UBI_UNKNOWN); + if (err) + goto out; + dbg_rcvry("inode %lu at %d:%d size %lld -> %lld ", e->inum, lnum, offs, + i_size, e->d_size); + return 0; + +out: + ubifs_warn("inode %lu failed to fix size %lld -> %lld error %d", + e->inum, e->i_size, e->d_size, err); + return err; +} + +/** + * ubifs_recover_size - recover inode size. + * @c: UBIFS file-system description object + * + * This function attempts to fix inode size discrepancies identified by the + * 'ubifs_recover_size_accum()' function. + * + * This functions returns %0 on success and a negative error code on failure. + */ +int ubifs_recover_size(struct ubifs_info *c) +{ + struct rb_node *this = rb_first(&c->size_tree); + + while (this) { + struct size_entry *e; + int err; + + e = rb_entry(this, struct size_entry, rb); + if (!e->exists) { + union ubifs_key key; + + ino_key_init(c, &key, e->inum); + err = ubifs_tnc_lookup(c, &key, c->sbuf); + if (err && err != -ENOENT) + return err; + if (err == -ENOENT) { + /* Remove data nodes that have no inode */ + dbg_rcvry("removing ino %lu", e->inum); + err = ubifs_tnc_remove_ino(c, e->inum); + if (err) + return err; + } else { + struct ubifs_ino_node *ino = c->sbuf; + + e->exists = 1; + e->i_size = le64_to_cpu(ino->size); + } + } + if (e->exists && e->i_size < e->d_size) { + if (!e->inode && (c->vfs_sb->s_flags & MS_RDONLY)) { + /* Fix the inode size and pin it in memory */ + struct inode *inode; + + inode = ubifs_iget(c->vfs_sb, e->inum); + if (IS_ERR(inode)) + return PTR_ERR(inode); + if (inode->i_size < e->d_size) { + dbg_rcvry("ino %lu size %lld -> %lld", + e->inum, e->d_size, + inode->i_size); + inode->i_size = e->d_size; + ubifs_inode(inode)->ui_size = e->d_size; + e->inode = inode; + this = rb_next(this); + continue; + } + iput(inode); + } else { + /* Fix the size in place */ + err = fix_size_in_place(c, e); + if (err) + return err; + if (e->inode) + iput(e->inode); + } + } + this = rb_next(this); + rb_erase(&e->rb, &c->size_tree); + kfree(e); + } + return 0; +} diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c new file mode 100644 index 000000000000..7399692af859 --- /dev/null +++ b/fs/ubifs/replay.c @@ -0,0 +1,1075 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Adrian Hunter + * Artem Bityutskiy (Битюцкий Артём) + */ + +/* + * This file contains journal replay code. It runs when the file-system is being + * mounted and requires no locking. + * + * The larger is the journal, the longer it takes to scan it, so the longer it + * takes to mount UBIFS. This is why the journal has limited size which may be + * changed depending on the system requirements. But a larger journal gives + * faster I/O speed because it writes the index less frequently. So this is a + * trade-off. Also, the journal is indexed by the in-memory index (TNC), so the + * larger is the journal, the more memory its index may consume. + */ + +#include "ubifs.h" + +/* + * Replay flags. + * + * REPLAY_DELETION: node was deleted + * REPLAY_REF: node is a reference node + */ +enum { + REPLAY_DELETION = 1, + REPLAY_REF = 2, +}; + +/** + * struct replay_entry - replay tree entry. + * @lnum: logical eraseblock number of the node + * @offs: node offset + * @len: node length + * @sqnum: node sequence number + * @flags: replay flags + * @rb: links the replay tree + * @key: node key + * @nm: directory entry name + * @old_size: truncation old size + * @new_size: truncation new size + * @free: amount of free space in a bud + * @dirty: amount of dirty space in a bud from padding and deletion nodes + * + * UBIFS journal replay must compare node sequence numbers, which means it must + * build a tree of node information to insert into the TNC. + */ +struct replay_entry { + int lnum; + int offs; + int len; + unsigned long long sqnum; + int flags; + struct rb_node rb; + union ubifs_key key; + union { + struct qstr nm; + struct { + loff_t old_size; + loff_t new_size; + }; + struct { + int free; + int dirty; + }; + }; +}; + +/** + * struct bud_entry - entry in the list of buds to replay. + * @list: next bud in the list + * @bud: bud description object + * @free: free bytes in the bud + * @sqnum: reference node sequence number + */ +struct bud_entry { + struct list_head list; + struct ubifs_bud *bud; + int free; + unsigned long long sqnum; +}; + +/** + * set_bud_lprops - set free and dirty space used by a bud. + * @c: UBIFS file-system description object + * @r: replay entry of bud + */ +static int set_bud_lprops(struct ubifs_info *c, struct replay_entry *r) +{ + const struct ubifs_lprops *lp; + int err = 0, dirty; + + ubifs_get_lprops(c); + + lp = ubifs_lpt_lookup_dirty(c, r->lnum); + if (IS_ERR(lp)) { + err = PTR_ERR(lp); + goto out; + } + + dirty = lp->dirty; + if (r->offs == 0 && (lp->free != c->leb_size || lp->dirty != 0)) { + /* + * The LEB was added to the journal with a starting offset of + * zero which means the LEB must have been empty. The LEB + * property values should be lp->free == c->leb_size and + * lp->dirty == 0, but that is not the case. The reason is that + * the LEB was garbage collected. The garbage collector resets + * the free and dirty space without recording it anywhere except + * lprops, so if there is not a commit then lprops does not have + * that information next time the file system is mounted. + * + * We do not need to adjust free space because the scan has told + * us the exact value which is recorded in the replay entry as + * r->free. + * + * However we do need to subtract from the dirty space the + * amount of space that the garbage collector reclaimed, which + * is the whole LEB minus the amount of space that was free. + */ + dbg_mnt("bud LEB %d was GC'd (%d free, %d dirty)", r->lnum, + lp->free, lp->dirty); + dbg_gc("bud LEB %d was GC'd (%d free, %d dirty)", r->lnum, + lp->free, lp->dirty); + dirty -= c->leb_size - lp->free; + /* + * If the replay order was perfect the dirty space would now be + * zero. The order is not perfect because the the journal heads + * race with eachother. This is not a problem but is does mean + * that the dirty space may temporarily exceed c->leb_size + * during the replay. + */ + if (dirty != 0) + dbg_msg("LEB %d lp: %d free %d dirty " + "replay: %d free %d dirty", r->lnum, lp->free, + lp->dirty, r->free, r->dirty); + } + lp = ubifs_change_lp(c, lp, r->free, dirty + r->dirty, + lp->flags | LPROPS_TAKEN, 0); + if (IS_ERR(lp)) { + err = PTR_ERR(lp); + goto out; + } +out: + ubifs_release_lprops(c); + return err; +} + +/** + * trun_remove_range - apply a replay entry for a truncation to the TNC. + * @c: UBIFS file-system description object + * @r: replay entry of truncation + */ +static int trun_remove_range(struct ubifs_info *c, struct replay_entry *r) +{ + unsigned min_blk, max_blk; + union ubifs_key min_key, max_key; + ino_t ino; + + min_blk = r->new_size / UBIFS_BLOCK_SIZE; + if (r->new_size & (UBIFS_BLOCK_SIZE - 1)) + min_blk += 1; + + max_blk = r->old_size / UBIFS_BLOCK_SIZE; + if ((r->old_size & (UBIFS_BLOCK_SIZE - 1)) == 0) + max_blk -= 1; + + ino = key_inum(c, &r->key); + + data_key_init(c, &min_key, ino, min_blk); + data_key_init(c, &max_key, ino, max_blk); + + return ubifs_tnc_remove_range(c, &min_key, &max_key); +} + +/** + * apply_replay_entry - apply a replay entry to the TNC. + * @c: UBIFS file-system description object + * @r: replay entry to apply + * + * Apply a replay entry to the TNC. + */ +static int apply_replay_entry(struct ubifs_info *c, struct replay_entry *r) +{ + int err, deletion = ((r->flags & REPLAY_DELETION) != 0); + + dbg_mnt("LEB %d:%d len %d flgs %d sqnum %llu %s", r->lnum, + r->offs, r->len, r->flags, r->sqnum, DBGKEY(&r->key)); + + /* Set c->replay_sqnum to help deal with dangling branches. */ + c->replay_sqnum = r->sqnum; + + if (r->flags & REPLAY_REF) + err = set_bud_lprops(c, r); + else if (is_hash_key(c, &r->key)) { + if (deletion) + err = ubifs_tnc_remove_nm(c, &r->key, &r->nm); + else + err = ubifs_tnc_add_nm(c, &r->key, r->lnum, r->offs, + r->len, &r->nm); + } else { + if (deletion) + switch (key_type(c, &r->key)) { + case UBIFS_INO_KEY: + { + ino_t inum = key_inum(c, &r->key); + + err = ubifs_tnc_remove_ino(c, inum); + break; + } + case UBIFS_TRUN_KEY: + err = trun_remove_range(c, r); + break; + default: + err = ubifs_tnc_remove(c, &r->key); + break; + } + else + err = ubifs_tnc_add(c, &r->key, r->lnum, r->offs, + r->len); + if (err) + return err; + + if (c->need_recovery) + err = ubifs_recover_size_accum(c, &r->key, deletion, + r->new_size); + } + + return err; +} + +/** + * destroy_replay_tree - destroy the replay. + * @c: UBIFS file-system description object + * + * Destroy the replay tree. + */ +static void destroy_replay_tree(struct ubifs_info *c) +{ + struct rb_node *this = c->replay_tree.rb_node; + struct replay_entry *r; + + while (this) { + if (this->rb_left) { + this = this->rb_left; + continue; + } else if (this->rb_right) { + this = this->rb_right; + continue; + } + r = rb_entry(this, struct replay_entry, rb); + this = rb_parent(this); + if (this) { + if (this->rb_left == &r->rb) + this->rb_left = NULL; + else + this->rb_right = NULL; + } + if (is_hash_key(c, &r->key)) + kfree(r->nm.name); + kfree(r); + } + c->replay_tree = RB_ROOT; +} + +/** + * apply_replay_tree - apply the replay tree to the TNC. + * @c: UBIFS file-system description object + * + * Apply the replay tree. + * Returns zero in case of success and a negative error code in case of + * failure. + */ +static int apply_replay_tree(struct ubifs_info *c) +{ + struct rb_node *this = rb_first(&c->replay_tree); + + while (this) { + struct replay_entry *r; + int err; + + cond_resched(); + + r = rb_entry(this, struct replay_entry, rb); + err = apply_replay_entry(c, r); + if (err) + return err; + this = rb_next(this); + } + return 0; +} + +/** + * insert_node - insert a node to the replay tree. + * @c: UBIFS file-system description object + * @lnum: node logical eraseblock number + * @offs: node offset + * @len: node length + * @key: node key + * @sqnum: sequence number + * @deletion: non-zero if this is a deletion + * @used: number of bytes in use in a LEB + * @old_size: truncation old size + * @new_size: truncation new size + * + * This function inserts a scanned non-direntry node to the replay tree. The + * replay tree is an RB-tree containing @struct replay_entry elements which are + * indexed by the sequence number. The replay tree is applied at the very end + * of the replay process. Since the tree is sorted in sequence number order, + * the older modifications are applied first. This function returns zero in + * case of success and a negative error code in case of failure. + */ +static int insert_node(struct ubifs_info *c, int lnum, int offs, int len, + union ubifs_key *key, unsigned long long sqnum, + int deletion, int *used, loff_t old_size, + loff_t new_size) +{ + struct rb_node **p = &c->replay_tree.rb_node, *parent = NULL; + struct replay_entry *r; + + if (key_inum(c, key) >= c->highest_inum) + c->highest_inum = key_inum(c, key); + + dbg_mnt("add LEB %d:%d, key %s", lnum, offs, DBGKEY(key)); + while (*p) { + parent = *p; + r = rb_entry(parent, struct replay_entry, rb); + if (sqnum < r->sqnum) { + p = &(*p)->rb_left; + continue; + } else if (sqnum > r->sqnum) { + p = &(*p)->rb_right; + continue; + } + ubifs_err("duplicate sqnum in replay"); + return -EINVAL; + } + + r = kzalloc(sizeof(struct replay_entry), GFP_KERNEL); + if (!r) + return -ENOMEM; + + if (!deletion) + *used += ALIGN(len, 8); + r->lnum = lnum; + r->offs = offs; + r->len = len; + r->sqnum = sqnum; + r->flags = (deletion ? REPLAY_DELETION : 0); + r->old_size = old_size; + r->new_size = new_size; + key_copy(c, key, &r->key); + + rb_link_node(&r->rb, parent, p); + rb_insert_color(&r->rb, &c->replay_tree); + return 0; +} + +/** + * insert_dent - insert a directory entry node into the replay tree. + * @c: UBIFS file-system description object + * @lnum: node logical eraseblock number + * @offs: node offset + * @len: node length + * @key: node key + * @name: directory entry name + * @nlen: directory entry name length + * @sqnum: sequence number + * @deletion: non-zero if this is a deletion + * @used: number of bytes in use in a LEB + * + * This function inserts a scanned directory entry node to the replay tree. + * Returns zero in case of success and a negative error code in case of + * failure. + * + * This function is also used for extended attribute entries because they are + * implemented as directory entry nodes. + */ +static int insert_dent(struct ubifs_info *c, int lnum, int offs, int len, + union ubifs_key *key, const char *name, int nlen, + unsigned long long sqnum, int deletion, int *used) +{ + struct rb_node **p = &c->replay_tree.rb_node, *parent = NULL; + struct replay_entry *r; + char *nbuf; + + if (key_inum(c, key) >= c->highest_inum) + c->highest_inum = key_inum(c, key); + + dbg_mnt("add LEB %d:%d, key %s", lnum, offs, DBGKEY(key)); + while (*p) { + parent = *p; + r = rb_entry(parent, struct replay_entry, rb); + if (sqnum < r->sqnum) { + p = &(*p)->rb_left; + continue; + } + if (sqnum > r->sqnum) { + p = &(*p)->rb_right; + continue; + } + ubifs_err("duplicate sqnum in replay"); + return -EINVAL; + } + + r = kzalloc(sizeof(struct replay_entry), GFP_KERNEL); + if (!r) + return -ENOMEM; + nbuf = kmalloc(nlen + 1, GFP_KERNEL); + if (!nbuf) { + kfree(r); + return -ENOMEM; + } + + if (!deletion) + *used += ALIGN(len, 8); + r->lnum = lnum; + r->offs = offs; + r->len = len; + r->sqnum = sqnum; + r->nm.len = nlen; + memcpy(nbuf, name, nlen); + nbuf[nlen] = '\0'; + r->nm.name = nbuf; + r->flags = (deletion ? REPLAY_DELETION : 0); + key_copy(c, key, &r->key); + + ubifs_assert(!*p); + rb_link_node(&r->rb, parent, p); + rb_insert_color(&r->rb, &c->replay_tree); + return 0; +} + +/** + * ubifs_validate_entry - validate directory or extended attribute entry node. + * @c: UBIFS file-system description object + * @dent: the node to validate + * + * This function validates directory or extended attribute entry node @dent. + * Returns zero if the node is all right and a %-EINVAL if not. + */ +int ubifs_validate_entry(struct ubifs_info *c, + const struct ubifs_dent_node *dent) +{ + int key_type = key_type_flash(c, dent->key); + int nlen = le16_to_cpu(dent->nlen); + + if (le32_to_cpu(dent->ch.len) != nlen + UBIFS_DENT_NODE_SZ + 1 || + dent->type >= UBIFS_ITYPES_CNT || + nlen > UBIFS_MAX_NLEN || dent->name[nlen] != 0 || + strnlen(dent->name, nlen) != nlen || + le64_to_cpu(dent->inum) > MAX_INUM) { + ubifs_err("bad %s node", key_type == UBIFS_DENT_KEY ? + "directory entry" : "extended attribute entry"); + return -EINVAL; + } + + if (key_type != UBIFS_DENT_KEY && key_type != UBIFS_XENT_KEY) { + ubifs_err("bad key type %d", key_type); + return -EINVAL; + } + + return 0; +} + +/** + * replay_bud - replay a bud logical eraseblock. + * @c: UBIFS file-system description object + * @lnum: bud logical eraseblock number to replay + * @offs: bud start offset + * @jhead: journal head to which this bud belongs + * @free: amount of free space in the bud is returned here + * @dirty: amount of dirty space from padding and deletion nodes is returned + * here + * + * This function returns zero in case of success and a negative error code in + * case of failure. + */ +static int replay_bud(struct ubifs_info *c, int lnum, int offs, int jhead, + int *free, int *dirty) +{ + int err = 0, used = 0; + struct ubifs_scan_leb *sleb; + struct ubifs_scan_node *snod; + struct ubifs_bud *bud; + + dbg_mnt("replay bud LEB %d, head %d", lnum, jhead); + if (c->need_recovery) + sleb = ubifs_recover_leb(c, lnum, offs, c->sbuf, jhead != GCHD); + else + sleb = ubifs_scan(c, lnum, offs, c->sbuf); + if (IS_ERR(sleb)) + return PTR_ERR(sleb); + + /* + * The bud does not have to start from offset zero - the beginning of + * the 'lnum' LEB may contain previously committed data. One of the + * things we have to do in replay is to correctly update lprops with + * newer information about this LEB. + * + * At this point lprops thinks that this LEB has 'c->leb_size - offs' + * bytes of free space because it only contain information about + * committed data. + * + * But we know that real amount of free space is 'c->leb_size - + * sleb->endpt', and the space in the 'lnum' LEB between 'offs' and + * 'sleb->endpt' is used by bud data. We have to correctly calculate + * how much of these data are dirty and update lprops with this + * information. + * + * The dirt in that LEB region is comprised of padding nodes, deletion + * nodes, truncation nodes and nodes which are obsoleted by subsequent + * nodes in this LEB. So instead of calculating clean space, we + * calculate used space ('used' variable). + */ + + list_for_each_entry(snod, &sleb->nodes, list) { + int deletion = 0; + + cond_resched(); + + if (snod->sqnum >= SQNUM_WATERMARK) { + ubifs_err("file system's life ended"); + goto out_dump; + } + + if (snod->sqnum > c->max_sqnum) + c->max_sqnum = snod->sqnum; + + switch (snod->type) { + case UBIFS_INO_NODE: + { + struct ubifs_ino_node *ino = snod->node; + loff_t new_size = le64_to_cpu(ino->size); + + if (le32_to_cpu(ino->nlink) == 0) + deletion = 1; + err = insert_node(c, lnum, snod->offs, snod->len, + &snod->key, snod->sqnum, deletion, + &used, 0, new_size); + break; + } + case UBIFS_DATA_NODE: + { + struct ubifs_data_node *dn = snod->node; + loff_t new_size = le32_to_cpu(dn->size) + + key_block(c, &snod->key) * + UBIFS_BLOCK_SIZE; + + err = insert_node(c, lnum, snod->offs, snod->len, + &snod->key, snod->sqnum, deletion, + &used, 0, new_size); + break; + } + case UBIFS_DENT_NODE: + case UBIFS_XENT_NODE: + { + struct ubifs_dent_node *dent = snod->node; + + err = ubifs_validate_entry(c, dent); + if (err) + goto out_dump; + + err = insert_dent(c, lnum, snod->offs, snod->len, + &snod->key, dent->name, + le16_to_cpu(dent->nlen), snod->sqnum, + !le64_to_cpu(dent->inum), &used); + break; + } + case UBIFS_TRUN_NODE: + { + struct ubifs_trun_node *trun = snod->node; + loff_t old_size = le64_to_cpu(trun->old_size); + loff_t new_size = le64_to_cpu(trun->new_size); + union ubifs_key key; + + /* Validate truncation node */ + if (old_size < 0 || old_size > c->max_inode_sz || + new_size < 0 || new_size > c->max_inode_sz || + old_size <= new_size) { + ubifs_err("bad truncation node"); + goto out_dump; + } + + /* + * Create a fake truncation key just to use the same + * functions which expect nodes to have keys. + */ + trun_key_init(c, &key, le32_to_cpu(trun->inum)); + err = insert_node(c, lnum, snod->offs, snod->len, + &key, snod->sqnum, 1, &used, + old_size, new_size); + break; + } + default: + ubifs_err("unexpected node type %d in bud LEB %d:%d", + snod->type, lnum, snod->offs); + err = -EINVAL; + goto out_dump; + } + if (err) + goto out; + } + + bud = ubifs_search_bud(c, lnum); + if (!bud) + BUG(); + + ubifs_assert(sleb->endpt - offs >= used); + ubifs_assert(sleb->endpt % c->min_io_size == 0); + + if (sleb->endpt + c->min_io_size <= c->leb_size && + !(c->vfs_sb->s_flags & MS_RDONLY)) + err = ubifs_wbuf_seek_nolock(&c->jheads[jhead].wbuf, lnum, + sleb->endpt, UBI_SHORTTERM); + + *dirty = sleb->endpt - offs - used; + *free = c->leb_size - sleb->endpt; + +out: + ubifs_scan_destroy(sleb); + return err; + +out_dump: + ubifs_err("bad node is at LEB %d:%d", lnum, snod->offs); + dbg_dump_node(c, snod->node); + ubifs_scan_destroy(sleb); + return -EINVAL; +} + +/** + * insert_ref_node - insert a reference node to the replay tree. + * @c: UBIFS file-system description object + * @lnum: node logical eraseblock number + * @offs: node offset + * @sqnum: sequence number + * @free: amount of free space in bud + * @dirty: amount of dirty space from padding and deletion nodes + * + * This function inserts a reference node to the replay tree and returns zero + * in case of success ort a negative error code in case of failure. + */ +static int insert_ref_node(struct ubifs_info *c, int lnum, int offs, + unsigned long long sqnum, int free, int dirty) +{ + struct rb_node **p = &c->replay_tree.rb_node, *parent = NULL; + struct replay_entry *r; + + dbg_mnt("add ref LEB %d:%d", lnum, offs); + while (*p) { + parent = *p; + r = rb_entry(parent, struct replay_entry, rb); + if (sqnum < r->sqnum) { + p = &(*p)->rb_left; + continue; + } else if (sqnum > r->sqnum) { + p = &(*p)->rb_right; + continue; + } + ubifs_err("duplicate sqnum in replay tree"); + return -EINVAL; + } + + r = kzalloc(sizeof(struct replay_entry), GFP_KERNEL); + if (!r) + return -ENOMEM; + + r->lnum = lnum; + r->offs = offs; + r->sqnum = sqnum; + r->flags = REPLAY_REF; + r->free = free; + r->dirty = dirty; + + rb_link_node(&r->rb, parent, p); + rb_insert_color(&r->rb, &c->replay_tree); + return 0; +} + +/** + * replay_buds - replay all buds. + * @c: UBIFS file-system description object + * + * This function returns zero in case of success and a negative error code in + * case of failure. + */ +static int replay_buds(struct ubifs_info *c) +{ + struct bud_entry *b; + int err, uninitialized_var(free), uninitialized_var(dirty); + + list_for_each_entry(b, &c->replay_buds, list) { + err = replay_bud(c, b->bud->lnum, b->bud->start, b->bud->jhead, + &free, &dirty); + if (err) + return err; + err = insert_ref_node(c, b->bud->lnum, b->bud->start, b->sqnum, + free, dirty); + if (err) + return err; + } + + return 0; +} + +/** + * destroy_bud_list - destroy the list of buds to replay. + * @c: UBIFS file-system description object + */ +static void destroy_bud_list(struct ubifs_info *c) +{ + struct bud_entry *b; + + while (!list_empty(&c->replay_buds)) { + b = list_entry(c->replay_buds.next, struct bud_entry, list); + list_del(&b->list); + kfree(b); + } +} + +/** + * add_replay_bud - add a bud to the list of buds to replay. + * @c: UBIFS file-system description object + * @lnum: bud logical eraseblock number to replay + * @offs: bud start offset + * @jhead: journal head to which this bud belongs + * @sqnum: reference node sequence number + * + * This function returns zero in case of success and a negative error code in + * case of failure. + */ +static int add_replay_bud(struct ubifs_info *c, int lnum, int offs, int jhead, + unsigned long long sqnum) +{ + struct ubifs_bud *bud; + struct bud_entry *b; + + dbg_mnt("add replay bud LEB %d:%d, head %d", lnum, offs, jhead); + + bud = kmalloc(sizeof(struct ubifs_bud), GFP_KERNEL); + if (!bud) + return -ENOMEM; + + b = kmalloc(sizeof(struct bud_entry), GFP_KERNEL); + if (!b) { + kfree(bud); + return -ENOMEM; + } + + bud->lnum = lnum; + bud->start = offs; + bud->jhead = jhead; + ubifs_add_bud(c, bud); + + b->bud = bud; + b->sqnum = sqnum; + list_add_tail(&b->list, &c->replay_buds); + + return 0; +} + +/** + * validate_ref - validate a reference node. + * @c: UBIFS file-system description object + * @ref: the reference node to validate + * @ref_lnum: LEB number of the reference node + * @ref_offs: reference node offset + * + * This function returns %1 if a bud reference already exists for the LEB. %0 is + * returned if the reference node is new, otherwise %-EINVAL is returned if + * validation failed. + */ +static int validate_ref(struct ubifs_info *c, const struct ubifs_ref_node *ref) +{ + struct ubifs_bud *bud; + int lnum = le32_to_cpu(ref->lnum); + unsigned int offs = le32_to_cpu(ref->offs); + unsigned int jhead = le32_to_cpu(ref->jhead); + + /* + * ref->offs may point to the end of LEB when the journal head points + * to the end of LEB and we write reference node for it during commit. + * So this is why we require 'offs > c->leb_size'. + */ + if (jhead >= c->jhead_cnt || lnum >= c->leb_cnt || + lnum < c->main_first || offs > c->leb_size || + offs & (c->min_io_size - 1)) + return -EINVAL; + + /* Make sure we have not already looked at this bud */ + bud = ubifs_search_bud(c, lnum); + if (bud) { + if (bud->jhead == jhead && bud->start <= offs) + return 1; + ubifs_err("bud at LEB %d:%d was already referred", lnum, offs); + return -EINVAL; + } + + return 0; +} + +/** + * replay_log_leb - replay a log logical eraseblock. + * @c: UBIFS file-system description object + * @lnum: log logical eraseblock to replay + * @offs: offset to start replaying from + * @sbuf: scan buffer + * + * This function replays a log LEB and returns zero in case of success, %1 if + * this is the last LEB in the log, and a negative error code in case of + * failure. + */ +static int replay_log_leb(struct ubifs_info *c, int lnum, int offs, void *sbuf) +{ + int err; + struct ubifs_scan_leb *sleb; + struct ubifs_scan_node *snod; + const struct ubifs_cs_node *node; + + dbg_mnt("replay log LEB %d:%d", lnum, offs); + sleb = ubifs_scan(c, lnum, offs, sbuf); + if (IS_ERR(sleb)) { + if (c->need_recovery) + sleb = ubifs_recover_log_leb(c, lnum, offs, sbuf); + if (IS_ERR(sleb)) + return PTR_ERR(sleb); + } + + if (sleb->nodes_cnt == 0) { + err = 1; + goto out; + } + + node = sleb->buf; + + snod = list_entry(sleb->nodes.next, struct ubifs_scan_node, list); + if (c->cs_sqnum == 0) { + /* + * This is the first log LEB we are looking at, make sure that + * the first node is a commit start node. Also record its + * sequence number so that UBIFS can determine where the log + * ends, because all nodes which were have higher sequence + * numbers. + */ + if (snod->type != UBIFS_CS_NODE) { + dbg_err("first log node at LEB %d:%d is not CS node", + lnum, offs); + goto out_dump; + } + if (le64_to_cpu(node->cmt_no) != c->cmt_no) { + dbg_err("first CS node at LEB %d:%d has wrong " + "commit number %llu expected %llu", + lnum, offs, + (unsigned long long)le64_to_cpu(node->cmt_no), + c->cmt_no); + goto out_dump; + } + + c->cs_sqnum = le64_to_cpu(node->ch.sqnum); + dbg_mnt("commit start sqnum %llu", c->cs_sqnum); + } + + if (snod->sqnum < c->cs_sqnum) { + /* + * This means that we reached end of log and now + * look to the older log data, which was already + * committed but the eraseblock was not erased (UBIFS + * only unmaps it). So this basically means we have to + * exit with "end of log" code. + */ + err = 1; + goto out; + } + + /* Make sure the first node sits at offset zero of the LEB */ + if (snod->offs != 0) { + dbg_err("first node is not at zero offset"); + goto out_dump; + } + + list_for_each_entry(snod, &sleb->nodes, list) { + + cond_resched(); + + if (snod->sqnum >= SQNUM_WATERMARK) { + ubifs_err("file system's life ended"); + goto out_dump; + } + + if (snod->sqnum < c->cs_sqnum) { + dbg_err("bad sqnum %llu, commit sqnum %llu", + snod->sqnum, c->cs_sqnum); + goto out_dump; + } + + if (snod->sqnum > c->max_sqnum) + c->max_sqnum = snod->sqnum; + + switch (snod->type) { + case UBIFS_REF_NODE: { + const struct ubifs_ref_node *ref = snod->node; + + err = validate_ref(c, ref); + if (err == 1) + break; /* Already have this bud */ + if (err) + goto out_dump; + + err = add_replay_bud(c, le32_to_cpu(ref->lnum), + le32_to_cpu(ref->offs), + le32_to_cpu(ref->jhead), + snod->sqnum); + if (err) + goto out; + + break; + } + case UBIFS_CS_NODE: + /* Make sure it sits at the beginning of LEB */ + if (snod->offs != 0) { + ubifs_err("unexpected node in log"); + goto out_dump; + } + break; + default: + ubifs_err("unexpected node in log"); + goto out_dump; + } + } + + if (sleb->endpt || c->lhead_offs >= c->leb_size) { + c->lhead_lnum = lnum; + c->lhead_offs = sleb->endpt; + } + + err = !sleb->endpt; +out: + ubifs_scan_destroy(sleb); + return err; + +out_dump: + ubifs_err("log error detected while replying the log at LEB %d:%d", + lnum, offs + snod->offs); + dbg_dump_node(c, snod->node); + ubifs_scan_destroy(sleb); + return -EINVAL; +} + +/** + * take_ihead - update the status of the index head in lprops to 'taken'. + * @c: UBIFS file-system description object + * + * This function returns the amount of free space in the index head LEB or a + * negative error code. + */ +static int take_ihead(struct ubifs_info *c) +{ + const struct ubifs_lprops *lp; + int err, free; + + ubifs_get_lprops(c); + + lp = ubifs_lpt_lookup_dirty(c, c->ihead_lnum); + if (IS_ERR(lp)) { + err = PTR_ERR(lp); + goto out; + } + + free = lp->free; + + lp = ubifs_change_lp(c, lp, LPROPS_NC, LPROPS_NC, + lp->flags | LPROPS_TAKEN, 0); + if (IS_ERR(lp)) { + err = PTR_ERR(lp); + goto out; + } + + err = free; +out: + ubifs_release_lprops(c); + return err; +} + +/** + * ubifs_replay_journal - replay journal. + * @c: UBIFS file-system description object + * + * This function scans the journal, replays and cleans it up. It makes sure all + * memory data structures related to uncommitted journal are built (dirty TNC + * tree, tree of buds, modified lprops, etc). + */ +int ubifs_replay_journal(struct ubifs_info *c) +{ + int err, i, lnum, offs, free; + void *sbuf = NULL; + + BUILD_BUG_ON(UBIFS_TRUN_KEY > 5); + + /* Update the status of the index head in lprops to 'taken' */ + free = take_ihead(c); + if (free < 0) + return free; /* Error code */ + + if (c->ihead_offs != c->leb_size - free) { + ubifs_err("bad index head LEB %d:%d", c->ihead_lnum, + c->ihead_offs); + return -EINVAL; + } + + sbuf = vmalloc(c->leb_size); + if (!sbuf) + return -ENOMEM; + + dbg_mnt("start replaying the journal"); + + c->replaying = 1; + + lnum = c->ltail_lnum = c->lhead_lnum; + offs = c->lhead_offs; + + for (i = 0; i < c->log_lebs; i++, lnum++) { + if (lnum >= UBIFS_LOG_LNUM + c->log_lebs) { + /* + * The log is logically circular, we reached the last + * LEB, switch to the first one. + */ + lnum = UBIFS_LOG_LNUM; + offs = 0; + } + err = replay_log_leb(c, lnum, offs, sbuf); + if (err == 1) + /* We hit the end of the log */ + break; + if (err) + goto out; + offs = 0; + } + + err = replay_buds(c); + if (err) + goto out; + + err = apply_replay_tree(c); + if (err) + goto out; + + ubifs_assert(c->bud_bytes <= c->max_bud_bytes || c->need_recovery); + dbg_mnt("finished, log head LEB %d:%d, max_sqnum %llu, " + "highest_inum %lu", c->lhead_lnum, c->lhead_offs, c->max_sqnum, + c->highest_inum); +out: + destroy_replay_tree(c); + destroy_bud_list(c); + vfree(sbuf); + c->replaying = 0; + return err; +} diff --git a/fs/ubifs/sb.c b/fs/ubifs/sb.c new file mode 100644 index 000000000000..2bf753b38889 --- /dev/null +++ b/fs/ubifs/sb.c @@ -0,0 +1,629 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* + * This file implements UBIFS superblock. The superblock is stored at the first + * LEB of the volume and is never changed by UBIFS. Only user-space tools may + * change it. The superblock node mostly contains geometry information. + */ + +#include "ubifs.h" +#include + +/* + * Default journal size in logical eraseblocks as a percent of total + * flash size. + */ +#define DEFAULT_JNL_PERCENT 5 + +/* Default maximum journal size in bytes */ +#define DEFAULT_MAX_JNL (32*1024*1024) + +/* Default indexing tree fanout */ +#define DEFAULT_FANOUT 8 + +/* Default number of data journal heads */ +#define DEFAULT_JHEADS_CNT 1 + +/* Default positions of different LEBs in the main area */ +#define DEFAULT_IDX_LEB 0 +#define DEFAULT_DATA_LEB 1 +#define DEFAULT_GC_LEB 2 + +/* Default number of LEB numbers in LPT's save table */ +#define DEFAULT_LSAVE_CNT 256 + +/* Default reserved pool size as a percent of maximum free space */ +#define DEFAULT_RP_PERCENT 5 + +/* The default maximum size of reserved pool in bytes */ +#define DEFAULT_MAX_RP_SIZE (5*1024*1024) + +/* Default time granularity in nanoseconds */ +#define DEFAULT_TIME_GRAN 1000000000 + +/** + * create_default_filesystem - format empty UBI volume. + * @c: UBIFS file-system description object + * + * This function creates default empty file-system. Returns zero in case of + * success and a negative error code in case of failure. + */ +static int create_default_filesystem(struct ubifs_info *c) +{ + struct ubifs_sb_node *sup; + struct ubifs_mst_node *mst; + struct ubifs_idx_node *idx; + struct ubifs_branch *br; + struct ubifs_ino_node *ino; + struct ubifs_cs_node *cs; + union ubifs_key key; + int err, tmp, jnl_lebs, log_lebs, max_buds, main_lebs, main_first; + int lpt_lebs, lpt_first, orph_lebs, big_lpt, ino_waste, sup_flags = 0; + int min_leb_cnt = UBIFS_MIN_LEB_CNT; + uint64_t tmp64, main_bytes; + + /* Some functions called from here depend on the @c->key_len filed */ + c->key_len = UBIFS_SK_LEN; + + /* + * First of all, we have to calculate default file-system geometry - + * log size, journal size, etc. + */ + if (c->leb_cnt < 0x7FFFFFFF / DEFAULT_JNL_PERCENT) + /* We can first multiply then divide and have no overflow */ + jnl_lebs = c->leb_cnt * DEFAULT_JNL_PERCENT / 100; + else + jnl_lebs = (c->leb_cnt / 100) * DEFAULT_JNL_PERCENT; + + if (jnl_lebs < UBIFS_MIN_JNL_LEBS) + jnl_lebs = UBIFS_MIN_JNL_LEBS; + if (jnl_lebs * c->leb_size > DEFAULT_MAX_JNL) + jnl_lebs = DEFAULT_MAX_JNL / c->leb_size; + + /* + * The log should be large enough to fit reference nodes for all bud + * LEBs. Because buds do not have to start from the beginning of LEBs + * (half of the LEB may contain committed data), the log should + * generally be larger, make it twice as large. + */ + tmp = 2 * (c->ref_node_alsz * jnl_lebs) + c->leb_size - 1; + log_lebs = tmp / c->leb_size; + /* Plus one LEB reserved for commit */ + log_lebs += 1; + if (c->leb_cnt - min_leb_cnt > 8) { + /* And some extra space to allow writes while committing */ + log_lebs += 1; + min_leb_cnt += 1; + } + + max_buds = jnl_lebs - log_lebs; + if (max_buds < UBIFS_MIN_BUD_LEBS) + max_buds = UBIFS_MIN_BUD_LEBS; + + /* + * Orphan nodes are stored in a separate area. One node can store a lot + * of orphan inode numbers, but when new orphan comes we just add a new + * orphan node. At some point the nodes are consolidated into one + * orphan node. + */ + orph_lebs = UBIFS_MIN_ORPH_LEBS; +#ifdef CONFIG_UBIFS_FS_DEBUG + if (c->leb_cnt - min_leb_cnt > 1) + /* + * For debugging purposes it is better to have at least 2 + * orphan LEBs, because the orphan subsystem would need to do + * consolidations and would be stressed more. + */ + orph_lebs += 1; +#endif + + main_lebs = c->leb_cnt - UBIFS_SB_LEBS - UBIFS_MST_LEBS - log_lebs; + main_lebs -= orph_lebs; + + lpt_first = UBIFS_LOG_LNUM + log_lebs; + c->lsave_cnt = DEFAULT_LSAVE_CNT; + c->max_leb_cnt = c->leb_cnt; + err = ubifs_create_dflt_lpt(c, &main_lebs, lpt_first, &lpt_lebs, + &big_lpt); + if (err) + return err; + + dbg_gen("LEB Properties Tree created (LEBs %d-%d)", lpt_first, + lpt_first + lpt_lebs - 1); + + main_first = c->leb_cnt - main_lebs; + + /* Create default superblock */ + tmp = ALIGN(UBIFS_SB_NODE_SZ, c->min_io_size); + sup = kzalloc(tmp, GFP_KERNEL); + if (!sup) + return -ENOMEM; + + tmp64 = (uint64_t)max_buds * c->leb_size; + if (big_lpt) + sup_flags |= UBIFS_FLG_BIGLPT; + + sup->ch.node_type = UBIFS_SB_NODE; + sup->key_hash = UBIFS_KEY_HASH_R5; + sup->flags = cpu_to_le32(sup_flags); + sup->min_io_size = cpu_to_le32(c->min_io_size); + sup->leb_size = cpu_to_le32(c->leb_size); + sup->leb_cnt = cpu_to_le32(c->leb_cnt); + sup->max_leb_cnt = cpu_to_le32(c->max_leb_cnt); + sup->max_bud_bytes = cpu_to_le64(tmp64); + sup->log_lebs = cpu_to_le32(log_lebs); + sup->lpt_lebs = cpu_to_le32(lpt_lebs); + sup->orph_lebs = cpu_to_le32(orph_lebs); + sup->jhead_cnt = cpu_to_le32(DEFAULT_JHEADS_CNT); + sup->fanout = cpu_to_le32(DEFAULT_FANOUT); + sup->lsave_cnt = cpu_to_le32(c->lsave_cnt); + sup->fmt_version = cpu_to_le32(UBIFS_FORMAT_VERSION); + sup->default_compr = cpu_to_le16(UBIFS_COMPR_LZO); + sup->time_gran = cpu_to_le32(DEFAULT_TIME_GRAN); + + generate_random_uuid(sup->uuid); + + main_bytes = (uint64_t)main_lebs * c->leb_size; + tmp64 = main_bytes * DEFAULT_RP_PERCENT; + do_div(tmp64, 100); + if (tmp64 > DEFAULT_MAX_RP_SIZE) + tmp64 = DEFAULT_MAX_RP_SIZE; + sup->rp_size = cpu_to_le64(tmp64); + + err = ubifs_write_node(c, sup, UBIFS_SB_NODE_SZ, 0, 0, UBI_LONGTERM); + kfree(sup); + if (err) + return err; + + dbg_gen("default superblock created at LEB 0:0"); + + /* Create default master node */ + mst = kzalloc(c->mst_node_alsz, GFP_KERNEL); + if (!mst) + return -ENOMEM; + + mst->ch.node_type = UBIFS_MST_NODE; + mst->log_lnum = cpu_to_le32(UBIFS_LOG_LNUM); + mst->highest_inum = cpu_to_le64(UBIFS_FIRST_INO); + mst->cmt_no = 0; + mst->root_lnum = cpu_to_le32(main_first + DEFAULT_IDX_LEB); + mst->root_offs = 0; + tmp = ubifs_idx_node_sz(c, 1); + mst->root_len = cpu_to_le32(tmp); + mst->gc_lnum = cpu_to_le32(main_first + DEFAULT_GC_LEB); + mst->ihead_lnum = cpu_to_le32(main_first + DEFAULT_IDX_LEB); + mst->ihead_offs = cpu_to_le32(ALIGN(tmp, c->min_io_size)); + mst->index_size = cpu_to_le64(ALIGN(tmp, 8)); + mst->lpt_lnum = cpu_to_le32(c->lpt_lnum); + mst->lpt_offs = cpu_to_le32(c->lpt_offs); + mst->nhead_lnum = cpu_to_le32(c->nhead_lnum); + mst->nhead_offs = cpu_to_le32(c->nhead_offs); + mst->ltab_lnum = cpu_to_le32(c->ltab_lnum); + mst->ltab_offs = cpu_to_le32(c->ltab_offs); + mst->lsave_lnum = cpu_to_le32(c->lsave_lnum); + mst->lsave_offs = cpu_to_le32(c->lsave_offs); + mst->lscan_lnum = cpu_to_le32(main_first); + mst->empty_lebs = cpu_to_le32(main_lebs - 2); + mst->idx_lebs = cpu_to_le32(1); + mst->leb_cnt = cpu_to_le32(c->leb_cnt); + + /* Calculate lprops statistics */ + tmp64 = main_bytes; + tmp64 -= ALIGN(ubifs_idx_node_sz(c, 1), c->min_io_size); + tmp64 -= ALIGN(UBIFS_INO_NODE_SZ, c->min_io_size); + mst->total_free = cpu_to_le64(tmp64); + + tmp64 = ALIGN(ubifs_idx_node_sz(c, 1), c->min_io_size); + ino_waste = ALIGN(UBIFS_INO_NODE_SZ, c->min_io_size) - + UBIFS_INO_NODE_SZ; + tmp64 += ino_waste; + tmp64 -= ALIGN(ubifs_idx_node_sz(c, 1), 8); + mst->total_dirty = cpu_to_le64(tmp64); + + /* The indexing LEB does not contribute to dark space */ + tmp64 = (c->main_lebs - 1) * c->dark_wm; + mst->total_dark = cpu_to_le64(tmp64); + + mst->total_used = cpu_to_le64(UBIFS_INO_NODE_SZ); + + err = ubifs_write_node(c, mst, UBIFS_MST_NODE_SZ, UBIFS_MST_LNUM, 0, + UBI_UNKNOWN); + if (err) { + kfree(mst); + return err; + } + err = ubifs_write_node(c, mst, UBIFS_MST_NODE_SZ, UBIFS_MST_LNUM + 1, 0, + UBI_UNKNOWN); + kfree(mst); + if (err) + return err; + + dbg_gen("default master node created at LEB %d:0", UBIFS_MST_LNUM); + + /* Create the root indexing node */ + tmp = ubifs_idx_node_sz(c, 1); + idx = kzalloc(ALIGN(tmp, c->min_io_size), GFP_KERNEL); + if (!idx) + return -ENOMEM; + + c->key_fmt = UBIFS_SIMPLE_KEY_FMT; + c->key_hash = key_r5_hash; + + idx->ch.node_type = UBIFS_IDX_NODE; + idx->child_cnt = cpu_to_le16(1); + ino_key_init(c, &key, UBIFS_ROOT_INO); + br = ubifs_idx_branch(c, idx, 0); + key_write_idx(c, &key, &br->key); + br->lnum = cpu_to_le32(main_first + DEFAULT_DATA_LEB); + br->len = cpu_to_le32(UBIFS_INO_NODE_SZ); + err = ubifs_write_node(c, idx, tmp, main_first + DEFAULT_IDX_LEB, 0, + UBI_UNKNOWN); + kfree(idx); + if (err) + return err; + + dbg_gen("default root indexing node created LEB %d:0", + main_first + DEFAULT_IDX_LEB); + + /* Create default root inode */ + tmp = ALIGN(UBIFS_INO_NODE_SZ, c->min_io_size); + ino = kzalloc(tmp, GFP_KERNEL); + if (!ino) + return -ENOMEM; + + ino_key_init_flash(c, &ino->key, UBIFS_ROOT_INO); + ino->ch.node_type = UBIFS_INO_NODE; + ino->creat_sqnum = cpu_to_le64(++c->max_sqnum); + ino->nlink = cpu_to_le32(2); + tmp = cpu_to_le64(CURRENT_TIME_SEC.tv_sec); + ino->atime_sec = tmp; + ino->ctime_sec = tmp; + ino->mtime_sec = tmp; + ino->atime_nsec = 0; + ino->ctime_nsec = 0; + ino->mtime_nsec = 0; + ino->mode = cpu_to_le32(S_IFDIR | S_IRUGO | S_IWUSR | S_IXUGO); + ino->size = cpu_to_le64(UBIFS_INO_NODE_SZ); + + /* Set compression enabled by default */ + ino->flags = cpu_to_le32(UBIFS_COMPR_FL); + + err = ubifs_write_node(c, ino, UBIFS_INO_NODE_SZ, + main_first + DEFAULT_DATA_LEB, 0, + UBI_UNKNOWN); + kfree(ino); + if (err) + return err; + + dbg_gen("root inode created at LEB %d:0", + main_first + DEFAULT_DATA_LEB); + + /* + * The first node in the log has to be the commit start node. This is + * always the case during normal file-system operation. Write a fake + * commit start node to the log. + */ + tmp = ALIGN(UBIFS_CS_NODE_SZ, c->min_io_size); + cs = kzalloc(tmp, GFP_KERNEL); + if (!cs) + return -ENOMEM; + + cs->ch.node_type = UBIFS_CS_NODE; + err = ubifs_write_node(c, cs, UBIFS_CS_NODE_SZ, UBIFS_LOG_LNUM, + 0, UBI_UNKNOWN); + kfree(cs); + + ubifs_msg("default file-system created"); + return 0; +} + +/** + * validate_sb - validate superblock node. + * @c: UBIFS file-system description object + * @sup: superblock node + * + * This function validates superblock node @sup. Since most of data was read + * from the superblock and stored in @c, the function validates fields in @c + * instead. Returns zero in case of success and %-EINVAL in case of validation + * failure. + */ +static int validate_sb(struct ubifs_info *c, struct ubifs_sb_node *sup) +{ + long long max_bytes; + int err = 1, min_leb_cnt; + + if (!c->key_hash) { + err = 2; + goto failed; + } + + if (sup->key_fmt != UBIFS_SIMPLE_KEY_FMT) { + err = 3; + goto failed; + } + + if (le32_to_cpu(sup->min_io_size) != c->min_io_size) { + ubifs_err("min. I/O unit mismatch: %d in superblock, %d real", + le32_to_cpu(sup->min_io_size), c->min_io_size); + goto failed; + } + + if (le32_to_cpu(sup->leb_size) != c->leb_size) { + ubifs_err("LEB size mismatch: %d in superblock, %d real", + le32_to_cpu(sup->leb_size), c->leb_size); + goto failed; + } + + if (c->log_lebs < UBIFS_MIN_LOG_LEBS || + c->lpt_lebs < UBIFS_MIN_LPT_LEBS || + c->orph_lebs < UBIFS_MIN_ORPH_LEBS || + c->main_lebs < UBIFS_MIN_MAIN_LEBS) { + err = 4; + goto failed; + } + + /* + * Calculate minimum allowed amount of main area LEBs. This is very + * similar to %UBIFS_MIN_LEB_CNT, but we take into account real what we + * have just read from the superblock. + */ + min_leb_cnt = UBIFS_SB_LEBS + UBIFS_MST_LEBS + c->log_lebs; + min_leb_cnt += c->lpt_lebs + c->orph_lebs + c->jhead_cnt + 6; + + if (c->leb_cnt < min_leb_cnt || c->leb_cnt > c->vi.size) { + ubifs_err("bad LEB count: %d in superblock, %d on UBI volume, " + "%d minimum required", c->leb_cnt, c->vi.size, + min_leb_cnt); + goto failed; + } + + if (c->max_leb_cnt < c->leb_cnt) { + ubifs_err("max. LEB count %d less than LEB count %d", + c->max_leb_cnt, c->leb_cnt); + goto failed; + } + + if (c->main_lebs < UBIFS_MIN_MAIN_LEBS) { + err = 7; + goto failed; + } + + if (c->max_bud_bytes < (long long)c->leb_size * UBIFS_MIN_BUD_LEBS || + c->max_bud_bytes > (long long)c->leb_size * c->main_lebs) { + err = 8; + goto failed; + } + + if (c->jhead_cnt < NONDATA_JHEADS_CNT + 1 || + c->jhead_cnt > NONDATA_JHEADS_CNT + UBIFS_MAX_JHEADS) { + err = 9; + goto failed; + } + + if (c->fanout < UBIFS_MIN_FANOUT || + ubifs_idx_node_sz(c, c->fanout) > c->leb_size) { + err = 10; + goto failed; + } + + if (c->lsave_cnt < 0 || (c->lsave_cnt > DEFAULT_LSAVE_CNT && + c->lsave_cnt > c->max_leb_cnt - UBIFS_SB_LEBS - UBIFS_MST_LEBS - + c->log_lebs - c->lpt_lebs - c->orph_lebs)) { + err = 11; + goto failed; + } + + if (UBIFS_SB_LEBS + UBIFS_MST_LEBS + c->log_lebs + c->lpt_lebs + + c->orph_lebs + c->main_lebs != c->leb_cnt) { + err = 12; + goto failed; + } + + if (c->default_compr < 0 || c->default_compr >= UBIFS_COMPR_TYPES_CNT) { + err = 13; + goto failed; + } + + max_bytes = c->main_lebs * (long long)c->leb_size; + if (c->rp_size < 0 || max_bytes < c->rp_size) { + err = 14; + goto failed; + } + + if (le32_to_cpu(sup->time_gran) > 1000000000 || + le32_to_cpu(sup->time_gran) < 1) { + err = 15; + goto failed; + } + + return 0; + +failed: + ubifs_err("bad superblock, error %d", err); + dbg_dump_node(c, sup); + return -EINVAL; +} + +/** + * ubifs_read_sb_node - read superblock node. + * @c: UBIFS file-system description object + * + * This function returns a pointer to the superblock node or a negative error + * code. + */ +struct ubifs_sb_node *ubifs_read_sb_node(struct ubifs_info *c) +{ + struct ubifs_sb_node *sup; + int err; + + sup = kmalloc(ALIGN(UBIFS_SB_NODE_SZ, c->min_io_size), GFP_NOFS); + if (!sup) + return ERR_PTR(-ENOMEM); + + err = ubifs_read_node(c, sup, UBIFS_SB_NODE, UBIFS_SB_NODE_SZ, + UBIFS_SB_LNUM, 0); + if (err) { + kfree(sup); + return ERR_PTR(err); + } + + return sup; +} + +/** + * ubifs_write_sb_node - write superblock node. + * @c: UBIFS file-system description object + * @sup: superblock node read with 'ubifs_read_sb_node()' + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_write_sb_node(struct ubifs_info *c, struct ubifs_sb_node *sup) +{ + int len = ALIGN(UBIFS_SB_NODE_SZ, c->min_io_size); + + ubifs_prepare_node(c, sup, UBIFS_SB_NODE_SZ, 1); + return ubifs_leb_change(c, UBIFS_SB_LNUM, sup, len, UBI_LONGTERM); +} + +/** + * ubifs_read_superblock - read superblock. + * @c: UBIFS file-system description object + * + * This function finds, reads and checks the superblock. If an empty UBI volume + * is being mounted, this function creates default superblock. Returns zero in + * case of success, and a negative error code in case of failure. + */ +int ubifs_read_superblock(struct ubifs_info *c) +{ + int err, sup_flags; + struct ubifs_sb_node *sup; + + if (c->empty) { + err = create_default_filesystem(c); + if (err) + return err; + } + + sup = ubifs_read_sb_node(c); + if (IS_ERR(sup)) + return PTR_ERR(sup); + + /* + * The software supports all previous versions but not future versions, + * due to the unavailability of time-travelling equipment. + */ + c->fmt_version = le32_to_cpu(sup->fmt_version); + if (c->fmt_version > UBIFS_FORMAT_VERSION) { + ubifs_err("on-flash format version is %d, but software only " + "supports up to version %d", c->fmt_version, + UBIFS_FORMAT_VERSION); + err = -EINVAL; + goto out; + } + + if (c->fmt_version < 3) { + ubifs_err("on-flash format version %d is not supported", + c->fmt_version); + err = -EINVAL; + goto out; + } + + switch (sup->key_hash) { + case UBIFS_KEY_HASH_R5: + c->key_hash = key_r5_hash; + c->key_hash_type = UBIFS_KEY_HASH_R5; + break; + + case UBIFS_KEY_HASH_TEST: + c->key_hash = key_test_hash; + c->key_hash_type = UBIFS_KEY_HASH_TEST; + break; + }; + + c->key_fmt = sup->key_fmt; + + switch (c->key_fmt) { + case UBIFS_SIMPLE_KEY_FMT: + c->key_len = UBIFS_SK_LEN; + break; + default: + ubifs_err("unsupported key format"); + err = -EINVAL; + goto out; + } + + c->leb_cnt = le32_to_cpu(sup->leb_cnt); + c->max_leb_cnt = le32_to_cpu(sup->max_leb_cnt); + c->max_bud_bytes = le64_to_cpu(sup->max_bud_bytes); + c->log_lebs = le32_to_cpu(sup->log_lebs); + c->lpt_lebs = le32_to_cpu(sup->lpt_lebs); + c->orph_lebs = le32_to_cpu(sup->orph_lebs); + c->jhead_cnt = le32_to_cpu(sup->jhead_cnt) + NONDATA_JHEADS_CNT; + c->fanout = le32_to_cpu(sup->fanout); + c->lsave_cnt = le32_to_cpu(sup->lsave_cnt); + c->default_compr = le16_to_cpu(sup->default_compr); + c->rp_size = le64_to_cpu(sup->rp_size); + c->rp_uid = le32_to_cpu(sup->rp_uid); + c->rp_gid = le32_to_cpu(sup->rp_gid); + sup_flags = le32_to_cpu(sup->flags); + + c->vfs_sb->s_time_gran = le32_to_cpu(sup->time_gran); + + memcpy(&c->uuid, &sup->uuid, 16); + + c->big_lpt = !!(sup_flags & UBIFS_FLG_BIGLPT); + + /* Automatically increase file system size to the maximum size */ + c->old_leb_cnt = c->leb_cnt; + if (c->leb_cnt < c->vi.size && c->leb_cnt < c->max_leb_cnt) { + c->leb_cnt = min_t(int, c->max_leb_cnt, c->vi.size); + if (c->vfs_sb->s_flags & MS_RDONLY) + dbg_mnt("Auto resizing (ro) from %d LEBs to %d LEBs", + c->old_leb_cnt, c->leb_cnt); + else { + dbg_mnt("Auto resizing (sb) from %d LEBs to %d LEBs", + c->old_leb_cnt, c->leb_cnt); + sup->leb_cnt = cpu_to_le32(c->leb_cnt); + err = ubifs_write_sb_node(c, sup); + if (err) + goto out; + c->old_leb_cnt = c->leb_cnt; + } + } + + c->log_bytes = (long long)c->log_lebs * c->leb_size; + c->log_last = UBIFS_LOG_LNUM + c->log_lebs - 1; + c->lpt_first = UBIFS_LOG_LNUM + c->log_lebs; + c->lpt_last = c->lpt_first + c->lpt_lebs - 1; + c->orph_first = c->lpt_last + 1; + c->orph_last = c->orph_first + c->orph_lebs - 1; + c->main_lebs = c->leb_cnt - UBIFS_SB_LEBS - UBIFS_MST_LEBS; + c->main_lebs -= c->log_lebs + c->lpt_lebs + c->orph_lebs; + c->main_first = c->leb_cnt - c->main_lebs; + c->report_rp_size = ubifs_reported_space(c, c->rp_size); + + err = validate_sb(c, sup); +out: + kfree(sup); + return err; +} diff --git a/fs/ubifs/scan.c b/fs/ubifs/scan.c new file mode 100644 index 000000000000..acf5c5fffc60 --- /dev/null +++ b/fs/ubifs/scan.c @@ -0,0 +1,362 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Adrian Hunter + * Artem Bityutskiy (Битюцкий Артём) + */ + +/* + * This file implements the scan which is a general-purpose function for + * determining what nodes are in an eraseblock. The scan is used to replay the + * journal, to do garbage collection. for the TNC in-the-gaps method, and by + * debugging functions. + */ + +#include "ubifs.h" + +/** + * scan_padding_bytes - scan for padding bytes. + * @buf: buffer to scan + * @len: length of buffer + * + * This function returns the number of padding bytes on success and + * %SCANNED_GARBAGE on failure. + */ +static int scan_padding_bytes(void *buf, int len) +{ + int pad_len = 0, max_pad_len = min_t(int, UBIFS_PAD_NODE_SZ, len); + uint8_t *p = buf; + + dbg_scan("not a node"); + + while (pad_len < max_pad_len && *p++ == UBIFS_PADDING_BYTE) + pad_len += 1; + + if (!pad_len || (pad_len & 7)) + return SCANNED_GARBAGE; + + dbg_scan("%d padding bytes", pad_len); + + return pad_len; +} + +/** + * ubifs_scan_a_node - scan for a node or padding. + * @c: UBIFS file-system description object + * @buf: buffer to scan + * @len: length of buffer + * @lnum: logical eraseblock number + * @offs: offset within the logical eraseblock + * @quiet: print no messages + * + * This function returns a scanning code to indicate what was scanned. + */ +int ubifs_scan_a_node(const struct ubifs_info *c, void *buf, int len, int lnum, + int offs, int quiet) +{ + struct ubifs_ch *ch = buf; + uint32_t magic; + + magic = le32_to_cpu(ch->magic); + + if (magic == 0xFFFFFFFF) { + dbg_scan("hit empty space"); + return SCANNED_EMPTY_SPACE; + } + + if (magic != UBIFS_NODE_MAGIC) + return scan_padding_bytes(buf, len); + + if (len < UBIFS_CH_SZ) + return SCANNED_GARBAGE; + + dbg_scan("scanning %s", dbg_ntype(ch->node_type)); + + if (ubifs_check_node(c, buf, lnum, offs, quiet)) + return SCANNED_A_CORRUPT_NODE; + + if (ch->node_type == UBIFS_PAD_NODE) { + struct ubifs_pad_node *pad = buf; + int pad_len = le32_to_cpu(pad->pad_len); + int node_len = le32_to_cpu(ch->len); + + /* Validate the padding node */ + if (pad_len < 0 || + offs + node_len + pad_len > c->leb_size) { + if (!quiet) { + ubifs_err("bad pad node at LEB %d:%d", + lnum, offs); + dbg_dump_node(c, pad); + } + return SCANNED_A_BAD_PAD_NODE; + } + + /* Make the node pads to 8-byte boundary */ + if ((node_len + pad_len) & 7) { + if (!quiet) { + dbg_err("bad padding length %d - %d", + offs, offs + node_len + pad_len); + } + return SCANNED_A_BAD_PAD_NODE; + } + + dbg_scan("%d bytes padded, offset now %d", + pad_len, ALIGN(offs + node_len + pad_len, 8)); + + return node_len + pad_len; + } + + return SCANNED_A_NODE; +} + +/** + * ubifs_start_scan - create LEB scanning information at start of scan. + * @c: UBIFS file-system description object + * @lnum: logical eraseblock number + * @offs: offset to start at (usually zero) + * @sbuf: scan buffer (must be c->leb_size) + * + * This function returns %0 on success and a negative error code on failure. + */ +struct ubifs_scan_leb *ubifs_start_scan(const struct ubifs_info *c, int lnum, + int offs, void *sbuf) +{ + struct ubifs_scan_leb *sleb; + int err; + + dbg_scan("scan LEB %d:%d", lnum, offs); + + sleb = kzalloc(sizeof(struct ubifs_scan_leb), GFP_NOFS); + if (!sleb) + return ERR_PTR(-ENOMEM); + + sleb->lnum = lnum; + INIT_LIST_HEAD(&sleb->nodes); + sleb->buf = sbuf; + + err = ubi_read(c->ubi, lnum, sbuf + offs, offs, c->leb_size - offs); + if (err && err != -EBADMSG) { + ubifs_err("cannot read %d bytes from LEB %d:%d," + " error %d", c->leb_size - offs, lnum, offs, err); + kfree(sleb); + return ERR_PTR(err); + } + + if (err == -EBADMSG) + sleb->ecc = 1; + + return sleb; +} + +/** + * ubifs_end_scan - update LEB scanning information at end of scan. + * @c: UBIFS file-system description object + * @sleb: scanning information + * @lnum: logical eraseblock number + * @offs: offset to start at (usually zero) + * + * This function returns %0 on success and a negative error code on failure. + */ +void ubifs_end_scan(const struct ubifs_info *c, struct ubifs_scan_leb *sleb, + int lnum, int offs) +{ + lnum = lnum; + dbg_scan("stop scanning LEB %d at offset %d", lnum, offs); + ubifs_assert(offs % c->min_io_size == 0); + + sleb->endpt = ALIGN(offs, c->min_io_size); +} + +/** + * ubifs_add_snod - add a scanned node to LEB scanning information. + * @c: UBIFS file-system description object + * @sleb: scanning information + * @buf: buffer containing node + * @offs: offset of node on flash + * + * This function returns %0 on success and a negative error code on failure. + */ +int ubifs_add_snod(const struct ubifs_info *c, struct ubifs_scan_leb *sleb, + void *buf, int offs) +{ + struct ubifs_ch *ch = buf; + struct ubifs_ino_node *ino = buf; + struct ubifs_scan_node *snod; + + snod = kzalloc(sizeof(struct ubifs_scan_node), GFP_NOFS); + if (!snod) + return -ENOMEM; + + snod->sqnum = le64_to_cpu(ch->sqnum); + snod->type = ch->node_type; + snod->offs = offs; + snod->len = le32_to_cpu(ch->len); + snod->node = buf; + + switch (ch->node_type) { + case UBIFS_INO_NODE: + case UBIFS_DENT_NODE: + case UBIFS_XENT_NODE: + case UBIFS_DATA_NODE: + case UBIFS_TRUN_NODE: + /* + * The key is in the same place in all keyed + * nodes. + */ + key_read(c, &ino->key, &snod->key); + break; + } + list_add_tail(&snod->list, &sleb->nodes); + sleb->nodes_cnt += 1; + return 0; +} + +/** + * ubifs_scanned_corruption - print information after UBIFS scanned corruption. + * @c: UBIFS file-system description object + * @lnum: LEB number of corruption + * @offs: offset of corruption + * @buf: buffer containing corruption + */ +void ubifs_scanned_corruption(const struct ubifs_info *c, int lnum, int offs, + void *buf) +{ + int len; + + ubifs_err("corrupted data at LEB %d:%d", lnum, offs); + if (dbg_failure_mode) + return; + len = c->leb_size - offs; + if (len > 4096) + len = 4096; + dbg_err("first %d bytes from LEB %d:%d", len, lnum, offs); + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 4, buf, len, 1); +} + +/** + * ubifs_scan - scan a logical eraseblock. + * @c: UBIFS file-system description object + * @lnum: logical eraseblock number + * @offs: offset to start at (usually zero) + * @sbuf: scan buffer (must be c->leb_size) + * + * This function scans LEB number @lnum and returns complete information about + * its contents. Returns an error code in case of failure. + */ +struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum, + int offs, void *sbuf) +{ + void *buf = sbuf + offs; + int err, len = c->leb_size - offs; + struct ubifs_scan_leb *sleb; + + sleb = ubifs_start_scan(c, lnum, offs, sbuf); + if (IS_ERR(sleb)) + return sleb; + + while (len >= 8) { + struct ubifs_ch *ch = buf; + int node_len, ret; + + dbg_scan("look at LEB %d:%d (%d bytes left)", + lnum, offs, len); + + cond_resched(); + + ret = ubifs_scan_a_node(c, buf, len, lnum, offs, 0); + + if (ret > 0) { + /* Padding bytes or a valid padding node */ + offs += ret; + buf += ret; + len -= ret; + continue; + } + + if (ret == SCANNED_EMPTY_SPACE) + /* Empty space is checked later */ + break; + + switch (ret) { + case SCANNED_GARBAGE: + dbg_err("garbage"); + goto corrupted; + case SCANNED_A_NODE: + break; + case SCANNED_A_CORRUPT_NODE: + case SCANNED_A_BAD_PAD_NODE: + dbg_err("bad node"); + goto corrupted; + default: + dbg_err("unknown"); + goto corrupted; + } + + err = ubifs_add_snod(c, sleb, buf, offs); + if (err) + goto error; + + node_len = ALIGN(le32_to_cpu(ch->len), 8); + offs += node_len; + buf += node_len; + len -= node_len; + } + + if (offs % c->min_io_size) + goto corrupted; + + ubifs_end_scan(c, sleb, lnum, offs); + + for (; len > 4; offs += 4, buf = buf + 4, len -= 4) + if (*(uint32_t *)buf != 0xffffffff) + break; + for (; len; offs++, buf++, len--) + if (*(uint8_t *)buf != 0xff) { + ubifs_err("corrupt empty space at LEB %d:%d", + lnum, offs); + goto corrupted; + } + + return sleb; + +corrupted: + ubifs_scanned_corruption(c, lnum, offs, buf); + err = -EUCLEAN; +error: + ubifs_err("LEB %d scanning failed", lnum); + ubifs_scan_destroy(sleb); + return ERR_PTR(err); +} + +/** + * ubifs_scan_destroy - destroy LEB scanning information. + * @sleb: scanning information to free + */ +void ubifs_scan_destroy(struct ubifs_scan_leb *sleb) +{ + struct ubifs_scan_node *node; + struct list_head *head; + + head = &sleb->nodes; + while (!list_empty(head)) { + node = list_entry(head->next, struct ubifs_scan_node, list); + list_del(&node->list); + kfree(node); + } + kfree(sleb); +} diff --git a/fs/ubifs/shrinker.c b/fs/ubifs/shrinker.c new file mode 100644 index 000000000000..f248533841a2 --- /dev/null +++ b/fs/ubifs/shrinker.c @@ -0,0 +1,322 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* + * This file implements UBIFS shrinker which evicts clean znodes from the TNC + * tree when Linux VM needs more RAM. + * + * We do not implement any LRU lists to find oldest znodes to free because it + * would add additional overhead to the file system fast paths. So the shrinker + * just walks the TNC tree when searching for znodes to free. + * + * If the root of a TNC sub-tree is clean and old enough, then the children are + * also clean and old enough. So the shrinker walks the TNC in level order and + * dumps entire sub-trees. + * + * The age of znodes is just the time-stamp when they were last looked at. + * The current shrinker first tries to evict old znodes, then young ones. + * + * Since the shrinker is global, it has to protect against races with FS + * un-mounts, which is done by the 'ubifs_infos_lock' and 'c->umount_mutex'. + */ + +#include "ubifs.h" + +/* List of all UBIFS file-system instances */ +LIST_HEAD(ubifs_infos); + +/* + * We number each shrinker run and record the number on the ubifs_info structure + * so that we can easily work out which ubifs_info structures have already been + * done by the current run. + */ +static unsigned int shrinker_run_no; + +/* Protects 'ubifs_infos' list */ +DEFINE_SPINLOCK(ubifs_infos_lock); + +/* Global clean znode counter (for all mounted UBIFS instances) */ +atomic_long_t ubifs_clean_zn_cnt; + +/** + * shrink_tnc - shrink TNC tree. + * @c: UBIFS file-system description object + * @nr: number of znodes to free + * @age: the age of znodes to free + * @contention: if any contention, this is set to %1 + * + * This function traverses TNC tree and frees clean znodes. It does not free + * clean znodes which younger then @age. Returns number of freed znodes. + */ +static int shrink_tnc(struct ubifs_info *c, int nr, int age, int *contention) +{ + int total_freed = 0; + struct ubifs_znode *znode, *zprev; + int time = get_seconds(); + + ubifs_assert(mutex_is_locked(&c->umount_mutex)); + ubifs_assert(mutex_is_locked(&c->tnc_mutex)); + + if (!c->zroot.znode || atomic_long_read(&c->clean_zn_cnt) == 0) + return 0; + + /* + * Traverse the TNC tree in levelorder manner, so that it is possible + * to destroy large sub-trees. Indeed, if a znode is old, then all its + * children are older or of the same age. + * + * Note, we are holding 'c->tnc_mutex', so we do not have to lock the + * 'c->space_lock' when _reading_ 'c->clean_zn_cnt', because it is + * changed only when the 'c->tnc_mutex' is held. + */ + zprev = NULL; + znode = ubifs_tnc_levelorder_next(c->zroot.znode, NULL); + while (znode && total_freed < nr && + atomic_long_read(&c->clean_zn_cnt) > 0) { + int freed; + + /* + * If the znode is clean, but it is in the 'c->cnext' list, this + * means that this znode has just been written to flash as a + * part of commit and was marked clean. They will be removed + * from the list at end commit. We cannot change the list, + * because it is not protected by any mutex (design decision to + * make commit really independent and parallel to main I/O). So + * we just skip these znodes. + * + * Note, the 'clean_zn_cnt' counters are not updated until + * after the commit, so the UBIFS shrinker does not report + * the znodes which are in the 'c->cnext' list as freeable. + * + * Also note, if the root of a sub-tree is not in 'c->cnext', + * then the whole sub-tree is not in 'c->cnext' as well, so it + * is safe to dump whole sub-tree. + */ + + if (znode->cnext) { + /* + * Very soon these znodes will be removed from the list + * and become freeable. + */ + *contention = 1; + } else if (!ubifs_zn_dirty(znode) && + abs(time - znode->time) >= age) { + if (znode->parent) + znode->parent->zbranch[znode->iip].znode = NULL; + else + c->zroot.znode = NULL; + + freed = ubifs_destroy_tnc_subtree(znode); + atomic_long_sub(freed, &ubifs_clean_zn_cnt); + atomic_long_sub(freed, &c->clean_zn_cnt); + ubifs_assert(atomic_long_read(&c->clean_zn_cnt) >= 0); + total_freed += freed; + znode = zprev; + } + + if (unlikely(!c->zroot.znode)) + break; + + zprev = znode; + znode = ubifs_tnc_levelorder_next(c->zroot.znode, znode); + cond_resched(); + } + + return total_freed; +} + +/** + * shrink_tnc_trees - shrink UBIFS TNC trees. + * @nr: number of znodes to free + * @age: the age of znodes to free + * @contention: if any contention, this is set to %1 + * + * This function walks the list of mounted UBIFS file-systems and frees clean + * znodes which are older then @age, until at least @nr znodes are freed. + * Returns the number of freed znodes. + */ +static int shrink_tnc_trees(int nr, int age, int *contention) +{ + struct ubifs_info *c; + struct list_head *p; + unsigned int run_no; + int freed = 0; + + spin_lock(&ubifs_infos_lock); + do { + run_no = ++shrinker_run_no; + } while (run_no == 0); + /* Iterate over all mounted UBIFS file-systems and try to shrink them */ + p = ubifs_infos.next; + while (p != &ubifs_infos) { + c = list_entry(p, struct ubifs_info, infos_list); + /* + * We move the ones we do to the end of the list, so we stop + * when we see one we have already done. + */ + if (c->shrinker_run_no == run_no) + break; + if (!mutex_trylock(&c->umount_mutex)) { + /* Some un-mount is in progress, try next FS */ + *contention = 1; + p = p->next; + continue; + } + /* + * We're holding 'c->umount_mutex', so the file-system won't go + * away. + */ + if (!mutex_trylock(&c->tnc_mutex)) { + mutex_unlock(&c->umount_mutex); + *contention = 1; + p = p->next; + continue; + } + spin_unlock(&ubifs_infos_lock); + /* + * OK, now we have TNC locked, the file-system cannot go away - + * it is safe to reap the cache. + */ + c->shrinker_run_no = run_no; + freed += shrink_tnc(c, nr, age, contention); + mutex_unlock(&c->tnc_mutex); + spin_lock(&ubifs_infos_lock); + /* Get the next list element before we move this one */ + p = p->next; + /* + * Move this one to the end of the list to provide some + * fairness. + */ + list_del(&c->infos_list); + list_add_tail(&c->infos_list, &ubifs_infos); + mutex_unlock(&c->umount_mutex); + if (freed >= nr) + break; + } + spin_unlock(&ubifs_infos_lock); + return freed; +} + +/** + * kick_a_thread - kick a background thread to start commit. + * + * This function kicks a background thread to start background commit. Returns + * %-1 if a thread was kicked or there is another reason to assume the memory + * will soon be freed or become freeable. If there are no dirty znodes, returns + * %0. + */ +static int kick_a_thread(void) +{ + int i; + struct ubifs_info *c; + + /* + * Iterate over all mounted UBIFS file-systems and find out if there is + * already an ongoing commit operation there. If no, then iterate for + * the second time and initiate background commit. + */ + spin_lock(&ubifs_infos_lock); + for (i = 0; i < 2; i++) { + list_for_each_entry(c, &ubifs_infos, infos_list) { + long dirty_zn_cnt; + + if (!mutex_trylock(&c->umount_mutex)) { + /* + * Some un-mount is in progress, it will + * certainly free memory, so just return. + */ + spin_unlock(&ubifs_infos_lock); + return -1; + } + + dirty_zn_cnt = atomic_long_read(&c->dirty_zn_cnt); + + if (!dirty_zn_cnt || c->cmt_state == COMMIT_BROKEN || + c->ro_media) { + mutex_unlock(&c->umount_mutex); + continue; + } + + if (c->cmt_state != COMMIT_RESTING) { + spin_unlock(&ubifs_infos_lock); + mutex_unlock(&c->umount_mutex); + return -1; + } + + if (i == 1) { + list_del(&c->infos_list); + list_add_tail(&c->infos_list, &ubifs_infos); + spin_unlock(&ubifs_infos_lock); + + ubifs_request_bg_commit(c); + mutex_unlock(&c->umount_mutex); + return -1; + } + mutex_unlock(&c->umount_mutex); + } + } + spin_unlock(&ubifs_infos_lock); + + return 0; +} + +int ubifs_shrinker(int nr, gfp_t gfp_mask) +{ + int freed, contention = 0; + long clean_zn_cnt = atomic_long_read(&ubifs_clean_zn_cnt); + + if (nr == 0) + return clean_zn_cnt; + + if (!clean_zn_cnt) { + /* + * No clean znodes, nothing to reap. All we can do in this case + * is to kick background threads to start commit, which will + * probably make clean znodes which, in turn, will be freeable. + * And we return -1 which means will make VM call us again + * later. + */ + dbg_tnc("no clean znodes, kick a thread"); + return kick_a_thread(); + } + + freed = shrink_tnc_trees(nr, OLD_ZNODE_AGE, &contention); + if (freed >= nr) + goto out; + + dbg_tnc("not enough old znodes, try to free young ones"); + freed += shrink_tnc_trees(nr - freed, YOUNG_ZNODE_AGE, &contention); + if (freed >= nr) + goto out; + + dbg_tnc("not enough young znodes, free all"); + freed += shrink_tnc_trees(nr - freed, 0, &contention); + + if (!freed && contention) { + dbg_tnc("freed nothing, but contention"); + return -1; + } + +out: + dbg_tnc("%d znodes were freed, requested %d", freed, nr); + return freed; +} diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c new file mode 100644 index 000000000000..00eb9c68ad03 --- /dev/null +++ b/fs/ubifs/super.c @@ -0,0 +1,1951 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* + * This file implements UBIFS initialization and VFS superblock operations. Some + * initialization stuff which is rather large and complex is placed at + * corresponding subsystems, but most of it is here. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ubifs.h" + +/* Slab cache for UBIFS inodes */ +struct kmem_cache *ubifs_inode_slab; + +/* UBIFS TNC shrinker description */ +static struct shrinker ubifs_shrinker_info = { + .shrink = ubifs_shrinker, + .seeks = DEFAULT_SEEKS, +}; + +/** + * validate_inode - validate inode. + * @c: UBIFS file-system description object + * @inode: the inode to validate + * + * This is a helper function for 'ubifs_iget()' which validates various fields + * of a newly built inode to make sure they contain sane values and prevent + * possible vulnerabilities. Returns zero if the inode is all right and + * a non-zero error code if not. + */ +static int validate_inode(struct ubifs_info *c, const struct inode *inode) +{ + int err; + const struct ubifs_inode *ui = ubifs_inode(inode); + + if (inode->i_size > c->max_inode_sz) { + ubifs_err("inode is too large (%lld)", + (long long)inode->i_size); + return 1; + } + + if (ui->compr_type < 0 || ui->compr_type >= UBIFS_COMPR_TYPES_CNT) { + ubifs_err("unknown compression type %d", ui->compr_type); + return 2; + } + + if (ui->xattr_names + ui->xattr_cnt > XATTR_LIST_MAX) + return 3; + + if (ui->data_len < 0 || ui->data_len > UBIFS_MAX_INO_DATA) + return 4; + + if (ui->xattr && (inode->i_mode & S_IFMT) != S_IFREG) + return 5; + + if (!ubifs_compr_present(ui->compr_type)) { + ubifs_warn("inode %lu uses '%s' compression, but it was not " + "compiled in", inode->i_ino, + ubifs_compr_name(ui->compr_type)); + } + + err = dbg_check_dir_size(c, inode); + return err; +} + +struct inode *ubifs_iget(struct super_block *sb, unsigned long inum) +{ + int err; + union ubifs_key key; + struct ubifs_ino_node *ino; + struct ubifs_info *c = sb->s_fs_info; + struct inode *inode; + struct ubifs_inode *ui; + + dbg_gen("inode %lu", inum); + + inode = iget_locked(sb, inum); + if (!inode) + return ERR_PTR(-ENOMEM); + if (!(inode->i_state & I_NEW)) + return inode; + ui = ubifs_inode(inode); + + ino = kmalloc(UBIFS_MAX_INO_NODE_SZ, GFP_NOFS); + if (!ino) { + err = -ENOMEM; + goto out; + } + + ino_key_init(c, &key, inode->i_ino); + + err = ubifs_tnc_lookup(c, &key, ino); + if (err) + goto out_ino; + + inode->i_flags |= (S_NOCMTIME | S_NOATIME); + inode->i_nlink = le32_to_cpu(ino->nlink); + inode->i_uid = le32_to_cpu(ino->uid); + inode->i_gid = le32_to_cpu(ino->gid); + inode->i_atime.tv_sec = (int64_t)le64_to_cpu(ino->atime_sec); + inode->i_atime.tv_nsec = le32_to_cpu(ino->atime_nsec); + inode->i_mtime.tv_sec = (int64_t)le64_to_cpu(ino->mtime_sec); + inode->i_mtime.tv_nsec = le32_to_cpu(ino->mtime_nsec); + inode->i_ctime.tv_sec = (int64_t)le64_to_cpu(ino->ctime_sec); + inode->i_ctime.tv_nsec = le32_to_cpu(ino->ctime_nsec); + inode->i_mode = le32_to_cpu(ino->mode); + inode->i_size = le64_to_cpu(ino->size); + + ui->data_len = le32_to_cpu(ino->data_len); + ui->flags = le32_to_cpu(ino->flags); + ui->compr_type = le16_to_cpu(ino->compr_type); + ui->creat_sqnum = le64_to_cpu(ino->creat_sqnum); + ui->xattr_cnt = le32_to_cpu(ino->xattr_cnt); + ui->xattr_size = le32_to_cpu(ino->xattr_size); + ui->xattr_names = le32_to_cpu(ino->xattr_names); + ui->synced_i_size = ui->ui_size = inode->i_size; + + ui->xattr = (ui->flags & UBIFS_XATTR_FL) ? 1 : 0; + + err = validate_inode(c, inode); + if (err) + goto out_invalid; + + /* Disable readahead */ + inode->i_mapping->backing_dev_info = &c->bdi; + + switch (inode->i_mode & S_IFMT) { + case S_IFREG: + inode->i_mapping->a_ops = &ubifs_file_address_operations; + inode->i_op = &ubifs_file_inode_operations; + inode->i_fop = &ubifs_file_operations; + if (ui->xattr) { + ui->data = kmalloc(ui->data_len + 1, GFP_NOFS); + if (!ui->data) { + err = -ENOMEM; + goto out_ino; + } + memcpy(ui->data, ino->data, ui->data_len); + ((char *)ui->data)[ui->data_len] = '\0'; + } else if (ui->data_len != 0) { + err = 10; + goto out_invalid; + } + break; + case S_IFDIR: + inode->i_op = &ubifs_dir_inode_operations; + inode->i_fop = &ubifs_dir_operations; + if (ui->data_len != 0) { + err = 11; + goto out_invalid; + } + break; + case S_IFLNK: + inode->i_op = &ubifs_symlink_inode_operations; + if (ui->data_len <= 0 || ui->data_len > UBIFS_MAX_INO_DATA) { + err = 12; + goto out_invalid; + } + ui->data = kmalloc(ui->data_len + 1, GFP_NOFS); + if (!ui->data) { + err = -ENOMEM; + goto out_ino; + } + memcpy(ui->data, ino->data, ui->data_len); + ((char *)ui->data)[ui->data_len] = '\0'; + break; + case S_IFBLK: + case S_IFCHR: + { + dev_t rdev; + union ubifs_dev_desc *dev; + + ui->data = kmalloc(sizeof(union ubifs_dev_desc), GFP_NOFS); + if (!ui->data) { + err = -ENOMEM; + goto out_ino; + } + + dev = (union ubifs_dev_desc *)ino->data; + if (ui->data_len == sizeof(dev->new)) + rdev = new_decode_dev(le32_to_cpu(dev->new)); + else if (ui->data_len == sizeof(dev->huge)) + rdev = huge_decode_dev(le64_to_cpu(dev->huge)); + else { + err = 13; + goto out_invalid; + } + memcpy(ui->data, ino->data, ui->data_len); + inode->i_op = &ubifs_file_inode_operations; + init_special_inode(inode, inode->i_mode, rdev); + break; + } + case S_IFSOCK: + case S_IFIFO: + inode->i_op = &ubifs_file_inode_operations; + init_special_inode(inode, inode->i_mode, 0); + if (ui->data_len != 0) { + err = 14; + goto out_invalid; + } + break; + default: + err = 15; + goto out_invalid; + } + + kfree(ino); + ubifs_set_inode_flags(inode); + unlock_new_inode(inode); + return inode; + +out_invalid: + ubifs_err("inode %lu validation failed, error %d", inode->i_ino, err); + dbg_dump_node(c, ino); + dbg_dump_inode(c, inode); + err = -EINVAL; +out_ino: + kfree(ino); +out: + ubifs_err("failed to read inode %lu, error %d", inode->i_ino, err); + iget_failed(inode); + return ERR_PTR(err); +} + +static struct inode *ubifs_alloc_inode(struct super_block *sb) +{ + struct ubifs_inode *ui; + + ui = kmem_cache_alloc(ubifs_inode_slab, GFP_NOFS); + if (!ui) + return NULL; + + memset((void *)ui + sizeof(struct inode), 0, + sizeof(struct ubifs_inode) - sizeof(struct inode)); + mutex_init(&ui->ui_mutex); + spin_lock_init(&ui->ui_lock); + return &ui->vfs_inode; +}; + +static void ubifs_destroy_inode(struct inode *inode) +{ + struct ubifs_inode *ui = ubifs_inode(inode); + + kfree(ui->data); + kmem_cache_free(ubifs_inode_slab, inode); +} + +/* + * Note, Linux write-back code calls this without 'i_mutex'. + */ +static int ubifs_write_inode(struct inode *inode, int wait) +{ + int err; + struct ubifs_info *c = inode->i_sb->s_fs_info; + struct ubifs_inode *ui = ubifs_inode(inode); + + ubifs_assert(!ui->xattr); + if (is_bad_inode(inode)) + return 0; + + mutex_lock(&ui->ui_mutex); + /* + * Due to races between write-back forced by budgeting + * (see 'sync_some_inodes()') and pdflush write-back, the inode may + * have already been synchronized, do not do this again. This might + * also happen if it was synchronized in an VFS operation, e.g. + * 'ubifs_link()'. + */ + if (!ui->dirty) { + mutex_unlock(&ui->ui_mutex); + return 0; + } + + dbg_gen("inode %lu", inode->i_ino); + err = ubifs_jnl_write_inode(c, inode, 0); + if (err) + ubifs_err("can't write inode %lu, error %d", inode->i_ino, err); + + ui->dirty = 0; + mutex_unlock(&ui->ui_mutex); + ubifs_release_dirty_inode_budget(c, ui); + return err; +} + +static void ubifs_delete_inode(struct inode *inode) +{ + int err; + struct ubifs_info *c = inode->i_sb->s_fs_info; + + if (ubifs_inode(inode)->xattr) + /* + * Extended attribute inode deletions are fully handled in + * 'ubifs_removexattr()'. These inodes are special and have + * limited usage, so there is nothing to do here. + */ + goto out; + + dbg_gen("inode %lu", inode->i_ino); + ubifs_assert(!atomic_read(&inode->i_count)); + ubifs_assert(inode->i_nlink == 0); + + truncate_inode_pages(&inode->i_data, 0); + if (is_bad_inode(inode)) + goto out; + + ubifs_inode(inode)->ui_size = inode->i_size = 0; + err = ubifs_jnl_write_inode(c, inode, 1); + if (err) + /* + * Worst case we have a lost orphan inode wasting space, so a + * simple error message is ok here. + */ + ubifs_err("can't write inode %lu, error %d", inode->i_ino, err); +out: + clear_inode(inode); +} + +static void ubifs_dirty_inode(struct inode *inode) +{ + struct ubifs_inode *ui = ubifs_inode(inode); + + ubifs_assert(mutex_is_locked(&ui->ui_mutex)); + if (!ui->dirty) { + ui->dirty = 1; + dbg_gen("inode %lu", inode->i_ino); + } +} + +static int ubifs_statfs(struct dentry *dentry, struct kstatfs *buf) +{ + struct ubifs_info *c = dentry->d_sb->s_fs_info; + unsigned long long free; + + free = ubifs_budg_get_free_space(c); + dbg_gen("free space %lld bytes (%lld blocks)", + free, free >> UBIFS_BLOCK_SHIFT); + + buf->f_type = UBIFS_SUPER_MAGIC; + buf->f_bsize = UBIFS_BLOCK_SIZE; + buf->f_blocks = c->block_cnt; + buf->f_bfree = free >> UBIFS_BLOCK_SHIFT; + if (free > c->report_rp_size) + buf->f_bavail = (free - c->report_rp_size) >> UBIFS_BLOCK_SHIFT; + else + buf->f_bavail = 0; + buf->f_files = 0; + buf->f_ffree = 0; + buf->f_namelen = UBIFS_MAX_NLEN; + + return 0; +} + +static int ubifs_show_options(struct seq_file *s, struct vfsmount *mnt) +{ + struct ubifs_info *c = mnt->mnt_sb->s_fs_info; + + if (c->mount_opts.unmount_mode == 2) + seq_printf(s, ",fast_unmount"); + else if (c->mount_opts.unmount_mode == 1) + seq_printf(s, ",norm_unmount"); + + return 0; +} + +static int ubifs_sync_fs(struct super_block *sb, int wait) +{ + struct ubifs_info *c = sb->s_fs_info; + int i, ret = 0, err; + + if (c->jheads) + for (i = 0; i < c->jhead_cnt; i++) { + err = ubifs_wbuf_sync(&c->jheads[i].wbuf); + if (err && !ret) + ret = err; + } + /* + * We ought to call sync for c->ubi but it does not have one. If it had + * it would in turn call mtd->sync, however mtd operations are + * synchronous anyway, so we don't lose any sleep here. + */ + return ret; +} + +/** + * init_constants_early - initialize UBIFS constants. + * @c: UBIFS file-system description object + * + * This function initialize UBIFS constants which do not need the superblock to + * be read. It also checks that the UBI volume satisfies basic UBIFS + * requirements. Returns zero in case of success and a negative error code in + * case of failure. + */ +static int init_constants_early(struct ubifs_info *c) +{ + if (c->vi.corrupted) { + ubifs_warn("UBI volume is corrupted - read-only mode"); + c->ro_media = 1; + } + + if (c->di.ro_mode) { + ubifs_msg("read-only UBI device"); + c->ro_media = 1; + } + + if (c->vi.vol_type == UBI_STATIC_VOLUME) { + ubifs_msg("static UBI volume - read-only mode"); + c->ro_media = 1; + } + + c->leb_cnt = c->vi.size; + c->leb_size = c->vi.usable_leb_size; + c->half_leb_size = c->leb_size / 2; + c->min_io_size = c->di.min_io_size; + c->min_io_shift = fls(c->min_io_size) - 1; + + if (c->leb_size < UBIFS_MIN_LEB_SZ) { + ubifs_err("too small LEBs (%d bytes), min. is %d bytes", + c->leb_size, UBIFS_MIN_LEB_SZ); + return -EINVAL; + } + + if (c->leb_cnt < UBIFS_MIN_LEB_CNT) { + ubifs_err("too few LEBs (%d), min. is %d", + c->leb_cnt, UBIFS_MIN_LEB_CNT); + return -EINVAL; + } + + if (!is_power_of_2(c->min_io_size)) { + ubifs_err("bad min. I/O size %d", c->min_io_size); + return -EINVAL; + } + + /* + * UBIFS aligns all node to 8-byte boundary, so to make function in + * io.c simpler, assume minimum I/O unit size to be 8 bytes if it is + * less than 8. + */ + if (c->min_io_size < 8) { + c->min_io_size = 8; + c->min_io_shift = 3; + } + + c->ref_node_alsz = ALIGN(UBIFS_REF_NODE_SZ, c->min_io_size); + c->mst_node_alsz = ALIGN(UBIFS_MST_NODE_SZ, c->min_io_size); + + /* + * Initialize node length ranges which are mostly needed for node + * length validation. + */ + c->ranges[UBIFS_PAD_NODE].len = UBIFS_PAD_NODE_SZ; + c->ranges[UBIFS_SB_NODE].len = UBIFS_SB_NODE_SZ; + c->ranges[UBIFS_MST_NODE].len = UBIFS_MST_NODE_SZ; + c->ranges[UBIFS_REF_NODE].len = UBIFS_REF_NODE_SZ; + c->ranges[UBIFS_TRUN_NODE].len = UBIFS_TRUN_NODE_SZ; + c->ranges[UBIFS_CS_NODE].len = UBIFS_CS_NODE_SZ; + + c->ranges[UBIFS_INO_NODE].min_len = UBIFS_INO_NODE_SZ; + c->ranges[UBIFS_INO_NODE].max_len = UBIFS_MAX_INO_NODE_SZ; + c->ranges[UBIFS_ORPH_NODE].min_len = + UBIFS_ORPH_NODE_SZ + sizeof(__le64); + c->ranges[UBIFS_ORPH_NODE].max_len = c->leb_size; + c->ranges[UBIFS_DENT_NODE].min_len = UBIFS_DENT_NODE_SZ; + c->ranges[UBIFS_DENT_NODE].max_len = UBIFS_MAX_DENT_NODE_SZ; + c->ranges[UBIFS_XENT_NODE].min_len = UBIFS_XENT_NODE_SZ; + c->ranges[UBIFS_XENT_NODE].max_len = UBIFS_MAX_XENT_NODE_SZ; + c->ranges[UBIFS_DATA_NODE].min_len = UBIFS_DATA_NODE_SZ; + c->ranges[UBIFS_DATA_NODE].max_len = UBIFS_MAX_DATA_NODE_SZ; + /* + * Minimum indexing node size is amended later when superblock is + * read and the key length is known. + */ + c->ranges[UBIFS_IDX_NODE].min_len = UBIFS_IDX_NODE_SZ + UBIFS_BRANCH_SZ; + /* + * Maximum indexing node size is amended later when superblock is + * read and the fanout is known. + */ + c->ranges[UBIFS_IDX_NODE].max_len = INT_MAX; + + /* + * Initialize dead and dark LEB space watermarks. + * + * Dead space is the space which cannot be used. Its watermark is + * equivalent to min. I/O unit or minimum node size if it is greater + * then min. I/O unit. + * + * Dark space is the space which might be used, or might not, depending + * on which node should be written to the LEB. Its watermark is + * equivalent to maximum UBIFS node size. + */ + c->dead_wm = ALIGN(MIN_WRITE_SZ, c->min_io_size); + c->dark_wm = ALIGN(UBIFS_MAX_NODE_SZ, c->min_io_size); + + return 0; +} + +/** + * bud_wbuf_callback - bud LEB write-buffer synchronization call-back. + * @c: UBIFS file-system description object + * @lnum: LEB the write-buffer was synchronized to + * @free: how many free bytes left in this LEB + * @pad: how many bytes were padded + * + * This is a callback function which is called by the I/O unit when the + * write-buffer is synchronized. We need this to correctly maintain space + * accounting in bud logical eraseblocks. This function returns zero in case of + * success and a negative error code in case of failure. + * + * This function actually belongs to the journal, but we keep it here because + * we want to keep it static. + */ +static int bud_wbuf_callback(struct ubifs_info *c, int lnum, int free, int pad) +{ + return ubifs_update_one_lp(c, lnum, free, pad, 0, 0); +} + +/* + * init_constants_late - initialize UBIFS constants. + * @c: UBIFS file-system description object + * + * This is a helper function which initializes various UBIFS constants after + * the superblock has been read. It also checks various UBIFS parameters and + * makes sure they are all right. Returns zero in case of success and a + * negative error code in case of failure. + */ +static int init_constants_late(struct ubifs_info *c) +{ + int tmp, err; + uint64_t tmp64; + + c->main_bytes = (long long)c->main_lebs * c->leb_size; + c->max_znode_sz = sizeof(struct ubifs_znode) + + c->fanout * sizeof(struct ubifs_zbranch); + + tmp = ubifs_idx_node_sz(c, 1); + c->ranges[UBIFS_IDX_NODE].min_len = tmp; + c->min_idx_node_sz = ALIGN(tmp, 8); + + tmp = ubifs_idx_node_sz(c, c->fanout); + c->ranges[UBIFS_IDX_NODE].max_len = tmp; + c->max_idx_node_sz = ALIGN(tmp, 8); + + /* Make sure LEB size is large enough to fit full commit */ + tmp = UBIFS_CS_NODE_SZ + UBIFS_REF_NODE_SZ * c->jhead_cnt; + tmp = ALIGN(tmp, c->min_io_size); + if (tmp > c->leb_size) { + dbg_err("too small LEB size %d, at least %d needed", + c->leb_size, tmp); + return -EINVAL; + } + + /* + * Make sure that the log is large enough to fit reference nodes for + * all buds plus one reserved LEB. + */ + tmp64 = c->max_bud_bytes; + tmp = do_div(tmp64, c->leb_size); + c->max_bud_cnt = tmp64 + !!tmp; + tmp = (c->ref_node_alsz * c->max_bud_cnt + c->leb_size - 1); + tmp /= c->leb_size; + tmp += 1; + if (c->log_lebs < tmp) { + dbg_err("too small log %d LEBs, required min. %d LEBs", + c->log_lebs, tmp); + return -EINVAL; + } + + /* + * When budgeting we assume worst-case scenarios when the pages are not + * be compressed and direntries are of the maximum size. + * + * Note, data, which may be stored in inodes is budgeted separately, so + * it is not included into 'c->inode_budget'. + */ + c->page_budget = UBIFS_MAX_DATA_NODE_SZ * UBIFS_BLOCKS_PER_PAGE; + c->inode_budget = UBIFS_INO_NODE_SZ; + c->dent_budget = UBIFS_MAX_DENT_NODE_SZ; + + /* + * When the amount of flash space used by buds becomes + * 'c->max_bud_bytes', UBIFS just blocks all writers and starts commit. + * The writers are unblocked when the commit is finished. To avoid + * writers to be blocked UBIFS initiates background commit in advance, + * when number of bud bytes becomes above the limit defined below. + */ + c->bg_bud_bytes = (c->max_bud_bytes * 13) >> 4; + + /* + * Ensure minimum journal size. All the bytes in the journal heads are + * considered to be used, when calculating the current journal usage. + * Consequently, if the journal is too small, UBIFS will treat it as + * always full. + */ + tmp64 = (uint64_t)(c->jhead_cnt + 1) * c->leb_size + 1; + if (c->bg_bud_bytes < tmp64) + c->bg_bud_bytes = tmp64; + if (c->max_bud_bytes < tmp64 + c->leb_size) + c->max_bud_bytes = tmp64 + c->leb_size; + + err = ubifs_calc_lpt_geom(c); + if (err) + return err; + + c->min_idx_lebs = ubifs_calc_min_idx_lebs(c); + + /* + * Calculate total amount of FS blocks. This number is not used + * internally because it does not make much sense for UBIFS, but it is + * necessary to report something for the 'statfs()' call. + * + * Subtract the LEB reserved for GC and the LEB which is reserved for + * deletions. + * + * Review 'ubifs_calc_available()' if changing this calculation. + */ + tmp64 = c->main_lebs - 2; + tmp64 *= (uint64_t)c->leb_size - c->dark_wm; + tmp64 = ubifs_reported_space(c, tmp64); + c->block_cnt = tmp64 >> UBIFS_BLOCK_SHIFT; + + return 0; +} + +/** + * take_gc_lnum - reserve GC LEB. + * @c: UBIFS file-system description object + * + * This function ensures that the LEB reserved for garbage collection is + * unmapped and is marked as "taken" in lprops. We also have to set free space + * to LEB size and dirty space to zero, because lprops may contain out-of-date + * information if the file-system was un-mounted before it has been committed. + * This function returns zero in case of success and a negative error code in + * case of failure. + */ +static int take_gc_lnum(struct ubifs_info *c) +{ + int err; + + if (c->gc_lnum == -1) { + ubifs_err("no LEB for GC"); + return -EINVAL; + } + + err = ubifs_leb_unmap(c, c->gc_lnum); + if (err) + return err; + + /* And we have to tell lprops that this LEB is taken */ + err = ubifs_change_one_lp(c, c->gc_lnum, c->leb_size, 0, + LPROPS_TAKEN, 0, 0); + return err; +} + +/** + * alloc_wbufs - allocate write-buffers. + * @c: UBIFS file-system description object + * + * This helper function allocates and initializes UBIFS write-buffers. Returns + * zero in case of success and %-ENOMEM in case of failure. + */ +static int alloc_wbufs(struct ubifs_info *c) +{ + int i, err; + + c->jheads = kzalloc(c->jhead_cnt * sizeof(struct ubifs_jhead), + GFP_KERNEL); + if (!c->jheads) + return -ENOMEM; + + /* Initialize journal heads */ + for (i = 0; i < c->jhead_cnt; i++) { + INIT_LIST_HEAD(&c->jheads[i].buds_list); + err = ubifs_wbuf_init(c, &c->jheads[i].wbuf); + if (err) + return err; + + c->jheads[i].wbuf.sync_callback = &bud_wbuf_callback; + c->jheads[i].wbuf.jhead = i; + } + + c->jheads[BASEHD].wbuf.dtype = UBI_SHORTTERM; + /* + * Garbage Collector head likely contains long-term data and + * does not need to be synchronized by timer. + */ + c->jheads[GCHD].wbuf.dtype = UBI_LONGTERM; + c->jheads[GCHD].wbuf.timeout = 0; + + return 0; +} + +/** + * free_wbufs - free write-buffers. + * @c: UBIFS file-system description object + */ +static void free_wbufs(struct ubifs_info *c) +{ + int i; + + if (c->jheads) { + for (i = 0; i < c->jhead_cnt; i++) { + kfree(c->jheads[i].wbuf.buf); + kfree(c->jheads[i].wbuf.inodes); + } + kfree(c->jheads); + c->jheads = NULL; + } +} + +/** + * free_orphans - free orphans. + * @c: UBIFS file-system description object + */ +static void free_orphans(struct ubifs_info *c) +{ + struct ubifs_orphan *orph; + + while (c->orph_dnext) { + orph = c->orph_dnext; + c->orph_dnext = orph->dnext; + list_del(&orph->list); + kfree(orph); + } + + while (!list_empty(&c->orph_list)) { + orph = list_entry(c->orph_list.next, struct ubifs_orphan, list); + list_del(&orph->list); + kfree(orph); + dbg_err("orphan list not empty at unmount"); + } + + vfree(c->orph_buf); + c->orph_buf = NULL; +} + +/** + * free_buds - free per-bud objects. + * @c: UBIFS file-system description object + */ +static void free_buds(struct ubifs_info *c) +{ + struct rb_node *this = c->buds.rb_node; + struct ubifs_bud *bud; + + while (this) { + if (this->rb_left) + this = this->rb_left; + else if (this->rb_right) + this = this->rb_right; + else { + bud = rb_entry(this, struct ubifs_bud, rb); + this = rb_parent(this); + if (this) { + if (this->rb_left == &bud->rb) + this->rb_left = NULL; + else + this->rb_right = NULL; + } + kfree(bud); + } + } +} + +/** + * check_volume_empty - check if the UBI volume is empty. + * @c: UBIFS file-system description object + * + * This function checks if the UBIFS volume is empty by looking if its LEBs are + * mapped or not. The result of checking is stored in the @c->empty variable. + * Returns zero in case of success and a negative error code in case of + * failure. + */ +static int check_volume_empty(struct ubifs_info *c) +{ + int lnum, err; + + c->empty = 1; + for (lnum = 0; lnum < c->leb_cnt; lnum++) { + err = ubi_is_mapped(c->ubi, lnum); + if (unlikely(err < 0)) + return err; + if (err == 1) { + c->empty = 0; + break; + } + + cond_resched(); + } + + return 0; +} + +/* + * UBIFS mount options. + * + * Opt_fast_unmount: do not run a journal commit before un-mounting + * Opt_norm_unmount: run a journal commit before un-mounting + * Opt_err: just end of array marker + */ +enum { + Opt_fast_unmount, + Opt_norm_unmount, + Opt_err, +}; + +static match_table_t tokens = { + {Opt_fast_unmount, "fast_unmount"}, + {Opt_norm_unmount, "norm_unmount"}, + {Opt_err, NULL}, +}; + +/** + * ubifs_parse_options - parse mount parameters. + * @c: UBIFS file-system description object + * @options: parameters to parse + * @is_remount: non-zero if this is FS re-mount + * + * This function parses UBIFS mount options and returns zero in case success + * and a negative error code in case of failure. + */ +static int ubifs_parse_options(struct ubifs_info *c, char *options, + int is_remount) +{ + char *p; + substring_t args[MAX_OPT_ARGS]; + + if (!options) + return 0; + + while ((p = strsep(&options, ","))) { + int token; + + if (!*p) + continue; + + token = match_token(p, tokens, args); + switch (token) { + case Opt_fast_unmount: + c->mount_opts.unmount_mode = 2; + c->fast_unmount = 1; + break; + case Opt_norm_unmount: + c->mount_opts.unmount_mode = 1; + c->fast_unmount = 0; + break; + default: + ubifs_err("unrecognized mount option \"%s\" " + "or missing value", p); + return -EINVAL; + } + } + + return 0; +} + +/** + * destroy_journal - destroy journal data structures. + * @c: UBIFS file-system description object + * + * This function destroys journal data structures including those that may have + * been created by recovery functions. + */ +static void destroy_journal(struct ubifs_info *c) +{ + while (!list_empty(&c->unclean_leb_list)) { + struct ubifs_unclean_leb *ucleb; + + ucleb = list_entry(c->unclean_leb_list.next, + struct ubifs_unclean_leb, list); + list_del(&ucleb->list); + kfree(ucleb); + } + while (!list_empty(&c->old_buds)) { + struct ubifs_bud *bud; + + bud = list_entry(c->old_buds.next, struct ubifs_bud, list); + list_del(&bud->list); + kfree(bud); + } + ubifs_destroy_idx_gc(c); + ubifs_destroy_size_tree(c); + ubifs_tnc_close(c); + free_buds(c); +} + +/** + * mount_ubifs - mount UBIFS file-system. + * @c: UBIFS file-system description object + * + * This function mounts UBIFS file system. Returns zero in case of success and + * a negative error code in case of failure. + * + * Note, the function does not de-allocate resources it it fails half way + * through, and the caller has to do this instead. + */ +static int mount_ubifs(struct ubifs_info *c) +{ + struct super_block *sb = c->vfs_sb; + int err, mounted_read_only = (sb->s_flags & MS_RDONLY); + long long x; + size_t sz; + + err = init_constants_early(c); + if (err) + return err; + +#ifdef CONFIG_UBIFS_FS_DEBUG + c->dbg_buf = vmalloc(c->leb_size); + if (!c->dbg_buf) + return -ENOMEM; +#endif + + err = check_volume_empty(c); + if (err) + goto out_free; + + if (c->empty && (mounted_read_only || c->ro_media)) { + /* + * This UBI volume is empty, and read-only, or the file system + * is mounted read-only - we cannot format it. + */ + ubifs_err("can't format empty UBI volume: read-only %s", + c->ro_media ? "UBI volume" : "mount"); + err = -EROFS; + goto out_free; + } + + if (c->ro_media && !mounted_read_only) { + ubifs_err("cannot mount read-write - read-only media"); + err = -EROFS; + goto out_free; + } + + /* + * The requirement for the buffer is that it should fit indexing B-tree + * height amount of integers. We assume the height if the TNC tree will + * never exceed 64. + */ + err = -ENOMEM; + c->bottom_up_buf = kmalloc(BOTTOM_UP_HEIGHT * sizeof(int), GFP_KERNEL); + if (!c->bottom_up_buf) + goto out_free; + + c->sbuf = vmalloc(c->leb_size); + if (!c->sbuf) + goto out_free; + + if (!mounted_read_only) { + c->ileb_buf = vmalloc(c->leb_size); + if (!c->ileb_buf) + goto out_free; + } + + err = ubifs_read_superblock(c); + if (err) + goto out_free; + + /* + * Make sure the compressor which is set as the default on in the + * superblock was actually compiled in. + */ + if (!ubifs_compr_present(c->default_compr)) { + ubifs_warn("'%s' compressor is set by superblock, but not " + "compiled in", ubifs_compr_name(c->default_compr)); + c->default_compr = UBIFS_COMPR_NONE; + } + + dbg_failure_mode_registration(c); + + err = init_constants_late(c); + if (err) + goto out_dereg; + + sz = ALIGN(c->max_idx_node_sz, c->min_io_size); + sz = ALIGN(sz + c->max_idx_node_sz, c->min_io_size); + c->cbuf = kmalloc(sz, GFP_NOFS); + if (!c->cbuf) { + err = -ENOMEM; + goto out_dereg; + } + + if (!mounted_read_only) { + err = alloc_wbufs(c); + if (err) + goto out_cbuf; + + /* Create background thread */ + sprintf(c->bgt_name, BGT_NAME_PATTERN, c->vi.ubi_num, + c->vi.vol_id); + c->bgt = kthread_create(ubifs_bg_thread, c, c->bgt_name); + if (!c->bgt) + c->bgt = ERR_PTR(-EINVAL); + if (IS_ERR(c->bgt)) { + err = PTR_ERR(c->bgt); + c->bgt = NULL; + ubifs_err("cannot spawn \"%s\", error %d", + c->bgt_name, err); + goto out_wbufs; + } + wake_up_process(c->bgt); + } + + err = ubifs_read_master(c); + if (err) + goto out_master; + + if ((c->mst_node->flags & cpu_to_le32(UBIFS_MST_DIRTY)) != 0) { + ubifs_msg("recovery needed"); + c->need_recovery = 1; + if (!mounted_read_only) { + err = ubifs_recover_inl_heads(c, c->sbuf); + if (err) + goto out_master; + } + } else if (!mounted_read_only) { + /* + * Set the "dirty" flag so that if we reboot uncleanly we + * will notice this immediately on the next mount. + */ + c->mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY); + err = ubifs_write_master(c); + if (err) + goto out_master; + } + + err = ubifs_lpt_init(c, 1, !mounted_read_only); + if (err) + goto out_lpt; + + err = dbg_check_idx_size(c, c->old_idx_sz); + if (err) + goto out_lpt; + + err = ubifs_replay_journal(c); + if (err) + goto out_journal; + + err = ubifs_mount_orphans(c, c->need_recovery, mounted_read_only); + if (err) + goto out_orphans; + + if (!mounted_read_only) { + int lnum; + + /* Check for enough free space */ + if (ubifs_calc_available(c, c->min_idx_lebs) <= 0) { + ubifs_err("insufficient available space"); + err = -EINVAL; + goto out_orphans; + } + + /* Check for enough log space */ + lnum = c->lhead_lnum + 1; + if (lnum >= UBIFS_LOG_LNUM + c->log_lebs) + lnum = UBIFS_LOG_LNUM; + if (lnum == c->ltail_lnum) { + err = ubifs_consolidate_log(c); + if (err) + goto out_orphans; + } + + if (c->need_recovery) { + err = ubifs_recover_size(c); + if (err) + goto out_orphans; + err = ubifs_rcvry_gc_commit(c); + } else + err = take_gc_lnum(c); + if (err) + goto out_orphans; + + err = dbg_check_lprops(c); + if (err) + goto out_orphans; + } else if (c->need_recovery) { + err = ubifs_recover_size(c); + if (err) + goto out_orphans; + } + + spin_lock(&ubifs_infos_lock); + list_add_tail(&c->infos_list, &ubifs_infos); + spin_unlock(&ubifs_infos_lock); + + if (c->need_recovery) { + if (mounted_read_only) + ubifs_msg("recovery deferred"); + else { + c->need_recovery = 0; + ubifs_msg("recovery completed"); + } + } + + err = dbg_check_filesystem(c); + if (err) + goto out_infos; + + ubifs_msg("mounted UBI device %d, volume %d", c->vi.ubi_num, + c->vi.vol_id); + if (mounted_read_only) + ubifs_msg("mounted read-only"); + x = (long long)c->main_lebs * c->leb_size; + ubifs_msg("file system size: %lld bytes (%lld KiB, %lld MiB, %d LEBs)", + x, x >> 10, x >> 20, c->main_lebs); + x = (long long)c->log_lebs * c->leb_size + c->max_bud_bytes; + ubifs_msg("journal size: %lld bytes (%lld KiB, %lld MiB, %d LEBs)", + x, x >> 10, x >> 20, c->log_lebs + c->max_bud_cnt); + ubifs_msg("default compressor: %s", ubifs_compr_name(c->default_compr)); + ubifs_msg("media format %d, latest format %d", + c->fmt_version, UBIFS_FORMAT_VERSION); + + dbg_msg("compiled on: " __DATE__ " at " __TIME__); + dbg_msg("min. I/O unit size: %d bytes", c->min_io_size); + dbg_msg("LEB size: %d bytes (%d KiB)", + c->leb_size, c->leb_size / 1024); + dbg_msg("data journal heads: %d", + c->jhead_cnt - NONDATA_JHEADS_CNT); + dbg_msg("UUID: %02X%02X%02X%02X-%02X%02X" + "-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X", + c->uuid[0], c->uuid[1], c->uuid[2], c->uuid[3], + c->uuid[4], c->uuid[5], c->uuid[6], c->uuid[7], + c->uuid[8], c->uuid[9], c->uuid[10], c->uuid[11], + c->uuid[12], c->uuid[13], c->uuid[14], c->uuid[15]); + dbg_msg("fast unmount: %d", c->fast_unmount); + dbg_msg("big_lpt %d", c->big_lpt); + dbg_msg("log LEBs: %d (%d - %d)", + c->log_lebs, UBIFS_LOG_LNUM, c->log_last); + dbg_msg("LPT area LEBs: %d (%d - %d)", + c->lpt_lebs, c->lpt_first, c->lpt_last); + dbg_msg("orphan area LEBs: %d (%d - %d)", + c->orph_lebs, c->orph_first, c->orph_last); + dbg_msg("main area LEBs: %d (%d - %d)", + c->main_lebs, c->main_first, c->leb_cnt - 1); + dbg_msg("index LEBs: %d", c->lst.idx_lebs); + dbg_msg("total index bytes: %lld (%lld KiB, %lld MiB)", + c->old_idx_sz, c->old_idx_sz >> 10, c->old_idx_sz >> 20); + dbg_msg("key hash type: %d", c->key_hash_type); + dbg_msg("tree fanout: %d", c->fanout); + dbg_msg("reserved GC LEB: %d", c->gc_lnum); + dbg_msg("first main LEB: %d", c->main_first); + dbg_msg("dead watermark: %d", c->dead_wm); + dbg_msg("dark watermark: %d", c->dark_wm); + x = (long long)c->main_lebs * c->dark_wm; + dbg_msg("max. dark space: %lld (%lld KiB, %lld MiB)", + x, x >> 10, x >> 20); + dbg_msg("maximum bud bytes: %lld (%lld KiB, %lld MiB)", + c->max_bud_bytes, c->max_bud_bytes >> 10, + c->max_bud_bytes >> 20); + dbg_msg("BG commit bud bytes: %lld (%lld KiB, %lld MiB)", + c->bg_bud_bytes, c->bg_bud_bytes >> 10, + c->bg_bud_bytes >> 20); + dbg_msg("current bud bytes %lld (%lld KiB, %lld MiB)", + c->bud_bytes, c->bud_bytes >> 10, c->bud_bytes >> 20); + dbg_msg("max. seq. number: %llu", c->max_sqnum); + dbg_msg("commit number: %llu", c->cmt_no); + + return 0; + +out_infos: + spin_lock(&ubifs_infos_lock); + list_del(&c->infos_list); + spin_unlock(&ubifs_infos_lock); +out_orphans: + free_orphans(c); +out_journal: + destroy_journal(c); +out_lpt: + ubifs_lpt_free(c, 0); +out_master: + kfree(c->mst_node); + kfree(c->rcvrd_mst_node); + if (c->bgt) + kthread_stop(c->bgt); +out_wbufs: + free_wbufs(c); +out_cbuf: + kfree(c->cbuf); +out_dereg: + dbg_failure_mode_deregistration(c); +out_free: + vfree(c->ileb_buf); + vfree(c->sbuf); + kfree(c->bottom_up_buf); + UBIFS_DBG(vfree(c->dbg_buf)); + return err; +} + +/** + * ubifs_umount - un-mount UBIFS file-system. + * @c: UBIFS file-system description object + * + * Note, this function is called to free allocated resourced when un-mounting, + * as well as free resources when an error occurred while we were half way + * through mounting (error path cleanup function). So it has to make sure the + * resource was actually allocated before freeing it. + */ +static void ubifs_umount(struct ubifs_info *c) +{ + dbg_gen("un-mounting UBI device %d, volume %d", c->vi.ubi_num, + c->vi.vol_id); + + spin_lock(&ubifs_infos_lock); + list_del(&c->infos_list); + spin_unlock(&ubifs_infos_lock); + + if (c->bgt) + kthread_stop(c->bgt); + + destroy_journal(c); + free_wbufs(c); + free_orphans(c); + ubifs_lpt_free(c, 0); + + kfree(c->cbuf); + kfree(c->rcvrd_mst_node); + kfree(c->mst_node); + vfree(c->sbuf); + kfree(c->bottom_up_buf); + UBIFS_DBG(vfree(c->dbg_buf)); + vfree(c->ileb_buf); + dbg_failure_mode_deregistration(c); +} + +/** + * ubifs_remount_rw - re-mount in read-write mode. + * @c: UBIFS file-system description object + * + * UBIFS avoids allocating many unnecessary resources when mounted in read-only + * mode. This function allocates the needed resources and re-mounts UBIFS in + * read-write mode. + */ +static int ubifs_remount_rw(struct ubifs_info *c) +{ + int err, lnum; + + if (c->ro_media) + return -EINVAL; + + mutex_lock(&c->umount_mutex); + c->remounting_rw = 1; + + /* Check for enough free space */ + if (ubifs_calc_available(c, c->min_idx_lebs) <= 0) { + ubifs_err("insufficient available space"); + err = -EINVAL; + goto out; + } + + if (c->old_leb_cnt != c->leb_cnt) { + struct ubifs_sb_node *sup; + + sup = ubifs_read_sb_node(c); + if (IS_ERR(sup)) { + err = PTR_ERR(sup); + goto out; + } + sup->leb_cnt = cpu_to_le32(c->leb_cnt); + err = ubifs_write_sb_node(c, sup); + if (err) + goto out; + } + + if (c->need_recovery) { + ubifs_msg("completing deferred recovery"); + err = ubifs_write_rcvrd_mst_node(c); + if (err) + goto out; + err = ubifs_recover_size(c); + if (err) + goto out; + err = ubifs_clean_lebs(c, c->sbuf); + if (err) + goto out; + err = ubifs_recover_inl_heads(c, c->sbuf); + if (err) + goto out; + } + + if (!(c->mst_node->flags & cpu_to_le32(UBIFS_MST_DIRTY))) { + c->mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY); + err = ubifs_write_master(c); + if (err) + goto out; + } + + c->ileb_buf = vmalloc(c->leb_size); + if (!c->ileb_buf) { + err = -ENOMEM; + goto out; + } + + err = ubifs_lpt_init(c, 0, 1); + if (err) + goto out; + + err = alloc_wbufs(c); + if (err) + goto out; + + ubifs_create_buds_lists(c); + + /* Create background thread */ + c->bgt = kthread_create(ubifs_bg_thread, c, c->bgt_name); + if (!c->bgt) + c->bgt = ERR_PTR(-EINVAL); + if (IS_ERR(c->bgt)) { + err = PTR_ERR(c->bgt); + c->bgt = NULL; + ubifs_err("cannot spawn \"%s\", error %d", + c->bgt_name, err); + return err; + } + wake_up_process(c->bgt); + + c->orph_buf = vmalloc(c->leb_size); + if (!c->orph_buf) + return -ENOMEM; + + /* Check for enough log space */ + lnum = c->lhead_lnum + 1; + if (lnum >= UBIFS_LOG_LNUM + c->log_lebs) + lnum = UBIFS_LOG_LNUM; + if (lnum == c->ltail_lnum) { + err = ubifs_consolidate_log(c); + if (err) + goto out; + } + + if (c->need_recovery) + err = ubifs_rcvry_gc_commit(c); + else + err = take_gc_lnum(c); + if (err) + goto out; + + if (c->need_recovery) { + c->need_recovery = 0; + ubifs_msg("deferred recovery completed"); + } + + dbg_gen("re-mounted read-write"); + c->vfs_sb->s_flags &= ~MS_RDONLY; + c->remounting_rw = 0; + mutex_unlock(&c->umount_mutex); + return 0; + +out: + vfree(c->orph_buf); + c->orph_buf = NULL; + if (c->bgt) { + kthread_stop(c->bgt); + c->bgt = NULL; + } + free_wbufs(c); + vfree(c->ileb_buf); + c->ileb_buf = NULL; + ubifs_lpt_free(c, 1); + c->remounting_rw = 0; + mutex_unlock(&c->umount_mutex); + return err; +} + +/** + * commit_on_unmount - commit the journal when un-mounting. + * @c: UBIFS file-system description object + * + * This function is called during un-mounting and it commits the journal unless + * the "fast unmount" mode is enabled. It also avoids committing the journal if + * it contains too few data. + * + * Sometimes recovery requires the journal to be committed at least once, and + * this function takes care about this. + */ +static void commit_on_unmount(struct ubifs_info *c) +{ + if (!c->fast_unmount) { + long long bud_bytes; + + spin_lock(&c->buds_lock); + bud_bytes = c->bud_bytes; + spin_unlock(&c->buds_lock); + if (bud_bytes > c->leb_size) + ubifs_run_commit(c); + } +} + +/** + * ubifs_remount_ro - re-mount in read-only mode. + * @c: UBIFS file-system description object + * + * We rely on VFS to have stopped writing. Possibly the background thread could + * be running a commit, however kthread_stop will wait in that case. + */ +static void ubifs_remount_ro(struct ubifs_info *c) +{ + int i, err; + + ubifs_assert(!c->need_recovery); + commit_on_unmount(c); + + mutex_lock(&c->umount_mutex); + if (c->bgt) { + kthread_stop(c->bgt); + c->bgt = NULL; + } + + for (i = 0; i < c->jhead_cnt; i++) { + ubifs_wbuf_sync(&c->jheads[i].wbuf); + del_timer_sync(&c->jheads[i].wbuf.timer); + } + + if (!c->ro_media) { + c->mst_node->flags &= ~cpu_to_le32(UBIFS_MST_DIRTY); + c->mst_node->flags |= cpu_to_le32(UBIFS_MST_NO_ORPHS); + c->mst_node->gc_lnum = cpu_to_le32(c->gc_lnum); + err = ubifs_write_master(c); + if (err) + ubifs_ro_mode(c, err); + } + + ubifs_destroy_idx_gc(c); + free_wbufs(c); + vfree(c->orph_buf); + c->orph_buf = NULL; + vfree(c->ileb_buf); + c->ileb_buf = NULL; + ubifs_lpt_free(c, 1); + mutex_unlock(&c->umount_mutex); +} + +static void ubifs_put_super(struct super_block *sb) +{ + int i; + struct ubifs_info *c = sb->s_fs_info; + + ubifs_msg("un-mount UBI device %d, volume %d", c->vi.ubi_num, + c->vi.vol_id); + /* + * The following asserts are only valid if there has not been a failure + * of the media. For example, there will be dirty inodes if we failed + * to write them back because of I/O errors. + */ + ubifs_assert(atomic_long_read(&c->dirty_pg_cnt) == 0); + ubifs_assert(c->budg_idx_growth == 0); + ubifs_assert(c->budg_data_growth == 0); + + /* + * The 'c->umount_lock' prevents races between UBIFS memory shrinker + * and file system un-mount. Namely, it prevents the shrinker from + * picking this superblock for shrinking - it will be just skipped if + * the mutex is locked. + */ + mutex_lock(&c->umount_mutex); + if (!(c->vfs_sb->s_flags & MS_RDONLY)) { + /* + * First of all kill the background thread to make sure it does + * not interfere with un-mounting and freeing resources. + */ + if (c->bgt) { + kthread_stop(c->bgt); + c->bgt = NULL; + } + + /* Synchronize write-buffers */ + if (c->jheads) + for (i = 0; i < c->jhead_cnt; i++) { + ubifs_wbuf_sync(&c->jheads[i].wbuf); + del_timer_sync(&c->jheads[i].wbuf.timer); + } + + /* + * On fatal errors c->ro_media is set to 1, in which case we do + * not write the master node. + */ + if (!c->ro_media) { + /* + * We are being cleanly unmounted which means the + * orphans were killed - indicate this in the master + * node. Also save the reserved GC LEB number. + */ + int err; + + c->mst_node->flags &= ~cpu_to_le32(UBIFS_MST_DIRTY); + c->mst_node->flags |= cpu_to_le32(UBIFS_MST_NO_ORPHS); + c->mst_node->gc_lnum = cpu_to_le32(c->gc_lnum); + err = ubifs_write_master(c); + if (err) + /* + * Recovery will attempt to fix the master area + * next mount, so we just print a message and + * continue to unmount normally. + */ + ubifs_err("failed to write master node, " + "error %d", err); + } + } + + ubifs_umount(c); + bdi_destroy(&c->bdi); + ubi_close_volume(c->ubi); + mutex_unlock(&c->umount_mutex); + kfree(c); +} + +static int ubifs_remount_fs(struct super_block *sb, int *flags, char *data) +{ + int err; + struct ubifs_info *c = sb->s_fs_info; + + dbg_gen("old flags %#lx, new flags %#x", sb->s_flags, *flags); + + err = ubifs_parse_options(c, data, 1); + if (err) { + ubifs_err("invalid or unknown remount parameter"); + return err; + } + if ((sb->s_flags & MS_RDONLY) && !(*flags & MS_RDONLY)) { + err = ubifs_remount_rw(c); + if (err) + return err; + } else if (!(sb->s_flags & MS_RDONLY) && (*flags & MS_RDONLY)) + ubifs_remount_ro(c); + + return 0; +} + +struct super_operations ubifs_super_operations = { + .alloc_inode = ubifs_alloc_inode, + .destroy_inode = ubifs_destroy_inode, + .put_super = ubifs_put_super, + .write_inode = ubifs_write_inode, + .delete_inode = ubifs_delete_inode, + .statfs = ubifs_statfs, + .dirty_inode = ubifs_dirty_inode, + .remount_fs = ubifs_remount_fs, + .show_options = ubifs_show_options, + .sync_fs = ubifs_sync_fs, +}; + +/** + * open_ubi - parse UBI device name string and open the UBI device. + * @name: UBI volume name + * @mode: UBI volume open mode + * + * There are several ways to specify UBI volumes when mounting UBIFS: + * o ubiX_Y - UBI device number X, volume Y; + * o ubiY - UBI device number 0, volume Y; + * o ubiX:NAME - mount UBI device X, volume with name NAME; + * o ubi:NAME - mount UBI device 0, volume with name NAME. + * + * Alternative '!' separator may be used instead of ':' (because some shells + * like busybox may interpret ':' as an NFS host name separator). This function + * returns ubi volume object in case of success and a negative error code in + * case of failure. + */ +static struct ubi_volume_desc *open_ubi(const char *name, int mode) +{ + int dev, vol; + char *endptr; + + if (name[0] != 'u' || name[1] != 'b' || name[2] != 'i') + return ERR_PTR(-EINVAL); + + /* ubi:NAME method */ + if ((name[3] == ':' || name[3] == '!') && name[4] != '\0') + return ubi_open_volume_nm(0, name + 4, mode); + + if (!isdigit(name[3])) + return ERR_PTR(-EINVAL); + + dev = simple_strtoul(name + 3, &endptr, 0); + + /* ubiY method */ + if (*endptr == '\0') + return ubi_open_volume(0, dev, mode); + + /* ubiX_Y method */ + if (*endptr == '_' && isdigit(endptr[1])) { + vol = simple_strtoul(endptr + 1, &endptr, 0); + if (*endptr != '\0') + return ERR_PTR(-EINVAL); + return ubi_open_volume(dev, vol, mode); + } + + /* ubiX:NAME method */ + if ((*endptr == ':' || *endptr == '!') && endptr[1] != '\0') + return ubi_open_volume_nm(dev, ++endptr, mode); + + return ERR_PTR(-EINVAL); +} + +static int ubifs_fill_super(struct super_block *sb, void *data, int silent) +{ + struct ubi_volume_desc *ubi = sb->s_fs_info; + struct ubifs_info *c; + struct inode *root; + int err; + + c = kzalloc(sizeof(struct ubifs_info), GFP_KERNEL); + if (!c) + return -ENOMEM; + + spin_lock_init(&c->cnt_lock); + spin_lock_init(&c->cs_lock); + spin_lock_init(&c->buds_lock); + spin_lock_init(&c->space_lock); + spin_lock_init(&c->orphan_lock); + init_rwsem(&c->commit_sem); + mutex_init(&c->lp_mutex); + mutex_init(&c->tnc_mutex); + mutex_init(&c->log_mutex); + mutex_init(&c->mst_mutex); + mutex_init(&c->umount_mutex); + init_waitqueue_head(&c->cmt_wq); + c->buds = RB_ROOT; + c->old_idx = RB_ROOT; + c->size_tree = RB_ROOT; + c->orph_tree = RB_ROOT; + INIT_LIST_HEAD(&c->infos_list); + INIT_LIST_HEAD(&c->idx_gc); + INIT_LIST_HEAD(&c->replay_list); + INIT_LIST_HEAD(&c->replay_buds); + INIT_LIST_HEAD(&c->uncat_list); + INIT_LIST_HEAD(&c->empty_list); + INIT_LIST_HEAD(&c->freeable_list); + INIT_LIST_HEAD(&c->frdi_idx_list); + INIT_LIST_HEAD(&c->unclean_leb_list); + INIT_LIST_HEAD(&c->old_buds); + INIT_LIST_HEAD(&c->orph_list); + INIT_LIST_HEAD(&c->orph_new); + + c->highest_inum = UBIFS_FIRST_INO; + get_random_bytes(&c->vfs_gen, sizeof(int)); + c->lhead_lnum = c->ltail_lnum = UBIFS_LOG_LNUM; + + ubi_get_volume_info(ubi, &c->vi); + ubi_get_device_info(c->vi.ubi_num, &c->di); + + /* Re-open the UBI device in read-write mode */ + c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READWRITE); + if (IS_ERR(c->ubi)) { + err = PTR_ERR(c->ubi); + goto out_free; + } + + /* + * UBIFS provids 'backing_dev_info' in order to disable readahead. For + * UBIFS, I/O is not deferred, it is done immediately in readpage, + * which means the user would have to wait not just for their own I/O + * but the readahead I/O as well i.e. completely pointless. + * + * Read-ahead will be disabled because @c->bdi.ra_pages is 0. + */ + c->bdi.capabilities = BDI_CAP_MAP_COPY; + c->bdi.unplug_io_fn = default_unplug_io_fn; + err = bdi_init(&c->bdi); + if (err) + goto out_close; + + err = ubifs_parse_options(c, data, 0); + if (err) + goto out_bdi; + + c->vfs_sb = sb; + + sb->s_fs_info = c; + sb->s_magic = UBIFS_SUPER_MAGIC; + sb->s_blocksize = UBIFS_BLOCK_SIZE; + sb->s_blocksize_bits = UBIFS_BLOCK_SHIFT; + sb->s_dev = c->vi.cdev; + sb->s_maxbytes = c->max_inode_sz = key_max_inode_size(c); + if (c->max_inode_sz > MAX_LFS_FILESIZE) + sb->s_maxbytes = c->max_inode_sz = MAX_LFS_FILESIZE; + sb->s_op = &ubifs_super_operations; + + mutex_lock(&c->umount_mutex); + err = mount_ubifs(c); + if (err) { + ubifs_assert(err < 0); + goto out_unlock; + } + + /* Read the root inode */ + root = ubifs_iget(sb, UBIFS_ROOT_INO); + if (IS_ERR(root)) { + err = PTR_ERR(root); + goto out_umount; + } + + sb->s_root = d_alloc_root(root); + if (!sb->s_root) + goto out_iput; + + mutex_unlock(&c->umount_mutex); + + return 0; + +out_iput: + iput(root); +out_umount: + ubifs_umount(c); +out_unlock: + mutex_unlock(&c->umount_mutex); +out_bdi: + bdi_destroy(&c->bdi); +out_close: + ubi_close_volume(c->ubi); +out_free: + kfree(c); + return err; +} + +static int sb_test(struct super_block *sb, void *data) +{ + dev_t *dev = data; + + return sb->s_dev == *dev; +} + +static int sb_set(struct super_block *sb, void *data) +{ + dev_t *dev = data; + + sb->s_dev = *dev; + return 0; +} + +static int ubifs_get_sb(struct file_system_type *fs_type, int flags, + const char *name, void *data, struct vfsmount *mnt) +{ + struct ubi_volume_desc *ubi; + struct ubi_volume_info vi; + struct super_block *sb; + int err; + + dbg_gen("name %s, flags %#x", name, flags); + + /* + * Get UBI device number and volume ID. Mount it read-only so far + * because this might be a new mount point, and UBI allows only one + * read-write user at a time. + */ + ubi = open_ubi(name, UBI_READONLY); + if (IS_ERR(ubi)) { + ubifs_err("cannot open \"%s\", error %d", + name, (int)PTR_ERR(ubi)); + return PTR_ERR(ubi); + } + ubi_get_volume_info(ubi, &vi); + + dbg_gen("opened ubi%d_%d", vi.ubi_num, vi.vol_id); + + sb = sget(fs_type, &sb_test, &sb_set, &vi.cdev); + if (IS_ERR(sb)) { + err = PTR_ERR(sb); + goto out_close; + } + + if (sb->s_root) { + /* A new mount point for already mounted UBIFS */ + dbg_gen("this ubi volume is already mounted"); + if ((flags ^ sb->s_flags) & MS_RDONLY) { + err = -EBUSY; + goto out_deact; + } + } else { + sb->s_flags = flags; + /* + * Pass 'ubi' to 'fill_super()' in sb->s_fs_info where it is + * replaced by 'c'. + */ + sb->s_fs_info = ubi; + err = ubifs_fill_super(sb, data, flags & MS_SILENT ? 1 : 0); + if (err) + goto out_deact; + /* We do not support atime */ + sb->s_flags |= MS_ACTIVE | MS_NOATIME; + } + + /* 'fill_super()' opens ubi again so we must close it here */ + ubi_close_volume(ubi); + + return simple_set_mnt(mnt, sb); + +out_deact: + up_write(&sb->s_umount); + deactivate_super(sb); +out_close: + ubi_close_volume(ubi); + return err; +} + +static void ubifs_kill_sb(struct super_block *sb) +{ + struct ubifs_info *c = sb->s_fs_info; + + /* + * We do 'commit_on_unmount()' here instead of 'ubifs_put_super()' + * in order to be outside BKL. + */ + if (sb->s_root && !(sb->s_flags & MS_RDONLY)) + commit_on_unmount(c); + /* The un-mount routine is actually done in put_super() */ + generic_shutdown_super(sb); +} + +static struct file_system_type ubifs_fs_type = { + .name = "ubifs", + .owner = THIS_MODULE, + .get_sb = ubifs_get_sb, + .kill_sb = ubifs_kill_sb +}; + +/* + * Inode slab cache constructor. + */ +static void inode_slab_ctor(struct kmem_cache *cachep, void *obj) +{ + struct ubifs_inode *ui = obj; + inode_init_once(&ui->vfs_inode); +} + +static int __init ubifs_init(void) +{ + int err; + + BUILD_BUG_ON(sizeof(struct ubifs_ch) != 24); + + /* Make sure node sizes are 8-byte aligned */ + BUILD_BUG_ON(UBIFS_CH_SZ & 7); + BUILD_BUG_ON(UBIFS_INO_NODE_SZ & 7); + BUILD_BUG_ON(UBIFS_DENT_NODE_SZ & 7); + BUILD_BUG_ON(UBIFS_XENT_NODE_SZ & 7); + BUILD_BUG_ON(UBIFS_DATA_NODE_SZ & 7); + BUILD_BUG_ON(UBIFS_TRUN_NODE_SZ & 7); + BUILD_BUG_ON(UBIFS_SB_NODE_SZ & 7); + BUILD_BUG_ON(UBIFS_MST_NODE_SZ & 7); + BUILD_BUG_ON(UBIFS_REF_NODE_SZ & 7); + BUILD_BUG_ON(UBIFS_CS_NODE_SZ & 7); + BUILD_BUG_ON(UBIFS_ORPH_NODE_SZ & 7); + + BUILD_BUG_ON(UBIFS_MAX_DENT_NODE_SZ & 7); + BUILD_BUG_ON(UBIFS_MAX_XENT_NODE_SZ & 7); + BUILD_BUG_ON(UBIFS_MAX_DATA_NODE_SZ & 7); + BUILD_BUG_ON(UBIFS_MAX_INO_NODE_SZ & 7); + BUILD_BUG_ON(UBIFS_MAX_NODE_SZ & 7); + BUILD_BUG_ON(MIN_WRITE_SZ & 7); + + /* Check min. node size */ + BUILD_BUG_ON(UBIFS_INO_NODE_SZ < MIN_WRITE_SZ); + BUILD_BUG_ON(UBIFS_DENT_NODE_SZ < MIN_WRITE_SZ); + BUILD_BUG_ON(UBIFS_XENT_NODE_SZ < MIN_WRITE_SZ); + BUILD_BUG_ON(UBIFS_TRUN_NODE_SZ < MIN_WRITE_SZ); + + BUILD_BUG_ON(UBIFS_MAX_DENT_NODE_SZ > UBIFS_MAX_NODE_SZ); + BUILD_BUG_ON(UBIFS_MAX_XENT_NODE_SZ > UBIFS_MAX_NODE_SZ); + BUILD_BUG_ON(UBIFS_MAX_DATA_NODE_SZ > UBIFS_MAX_NODE_SZ); + BUILD_BUG_ON(UBIFS_MAX_INO_NODE_SZ > UBIFS_MAX_NODE_SZ); + + /* Defined node sizes */ + BUILD_BUG_ON(UBIFS_SB_NODE_SZ != 4096); + BUILD_BUG_ON(UBIFS_MST_NODE_SZ != 512); + BUILD_BUG_ON(UBIFS_INO_NODE_SZ != 160); + BUILD_BUG_ON(UBIFS_REF_NODE_SZ != 64); + + /* + * We require that PAGE_CACHE_SIZE is greater-than-or-equal-to + * UBIFS_BLOCK_SIZE. It is assumed that both are powers of 2. + */ + if (PAGE_CACHE_SIZE < UBIFS_BLOCK_SIZE) { + ubifs_err("VFS page cache size is %u bytes, but UBIFS requires" + " at least 4096 bytes", + (unsigned int)PAGE_CACHE_SIZE); + return -EINVAL; + } + + err = register_filesystem(&ubifs_fs_type); + if (err) { + ubifs_err("cannot register file system, error %d", err); + return err; + } + + err = -ENOMEM; + ubifs_inode_slab = kmem_cache_create("ubifs_inode_slab", + sizeof(struct ubifs_inode), 0, + SLAB_MEM_SPREAD | SLAB_RECLAIM_ACCOUNT, + &inode_slab_ctor); + if (!ubifs_inode_slab) + goto out_reg; + + register_shrinker(&ubifs_shrinker_info); + + err = ubifs_compressors_init(); + if (err) + goto out_compr; + + return 0; + +out_compr: + unregister_shrinker(&ubifs_shrinker_info); + kmem_cache_destroy(ubifs_inode_slab); +out_reg: + unregister_filesystem(&ubifs_fs_type); + return err; +} +/* late_initcall to let compressors initialize first */ +late_initcall(ubifs_init); + +static void __exit ubifs_exit(void) +{ + ubifs_assert(list_empty(&ubifs_infos)); + ubifs_assert(atomic_long_read(&ubifs_clean_zn_cnt) == 0); + + ubifs_compressors_exit(); + unregister_shrinker(&ubifs_shrinker_info); + kmem_cache_destroy(ubifs_inode_slab); + unregister_filesystem(&ubifs_fs_type); +} +module_exit(ubifs_exit); + +MODULE_LICENSE("GPL"); +MODULE_VERSION(__stringify(UBIFS_VERSION)); +MODULE_AUTHOR("Artem Bityutskiy, Adrian Hunter"); +MODULE_DESCRIPTION("UBIFS - UBI File System"); diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c new file mode 100644 index 000000000000..e909f4a96443 --- /dev/null +++ b/fs/ubifs/tnc.c @@ -0,0 +1,2956 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Adrian Hunter + * Artem Bityutskiy (Битюцкий Артём) + */ + +/* + * This file implements TNC (Tree Node Cache) which caches indexing nodes of + * the UBIFS B-tree. + * + * At the moment the locking rules of the TNC tree are quite simple and + * straightforward. We just have a mutex and lock it when we traverse the + * tree. If a znode is not in memory, we read it from flash while still having + * the mutex locked. + */ + +#include +#include "ubifs.h" + +/* + * Returned codes of 'matches_name()' and 'fallible_matches_name()' functions. + * @NAME_LESS: name corresponding to the first argument is less than second + * @NAME_MATCHES: names match + * @NAME_GREATER: name corresponding to the second argument is greater than + * first + * @NOT_ON_MEDIA: node referred by zbranch does not exist on the media + * + * These constants were introduce to improve readability. + */ +enum { + NAME_LESS = 0, + NAME_MATCHES = 1, + NAME_GREATER = 2, + NOT_ON_MEDIA = 3, +}; + +/** + * insert_old_idx - record an index node obsoleted since the last commit start. + * @c: UBIFS file-system description object + * @lnum: LEB number of obsoleted index node + * @offs: offset of obsoleted index node + * + * Returns %0 on success, and a negative error code on failure. + * + * For recovery, there must always be a complete intact version of the index on + * flash at all times. That is called the "old index". It is the index as at the + * time of the last successful commit. Many of the index nodes in the old index + * may be dirty, but they must not be erased until the next successful commit + * (at which point that index becomes the old index). + * + * That means that the garbage collection and the in-the-gaps method of + * committing must be able to determine if an index node is in the old index. + * Most of the old index nodes can be found by looking up the TNC using the + * 'lookup_znode()' function. However, some of the old index nodes may have + * been deleted from the current index or may have been changed so much that + * they cannot be easily found. In those cases, an entry is added to an RB-tree. + * That is what this function does. The RB-tree is ordered by LEB number and + * offset because they uniquely identify the old index node. + */ +static int insert_old_idx(struct ubifs_info *c, int lnum, int offs) +{ + struct ubifs_old_idx *old_idx, *o; + struct rb_node **p, *parent = NULL; + + old_idx = kmalloc(sizeof(struct ubifs_old_idx), GFP_NOFS); + if (unlikely(!old_idx)) + return -ENOMEM; + old_idx->lnum = lnum; + old_idx->offs = offs; + + p = &c->old_idx.rb_node; + while (*p) { + parent = *p; + o = rb_entry(parent, struct ubifs_old_idx, rb); + if (lnum < o->lnum) + p = &(*p)->rb_left; + else if (lnum > o->lnum) + p = &(*p)->rb_right; + else if (offs < o->offs) + p = &(*p)->rb_left; + else if (offs > o->offs) + p = &(*p)->rb_right; + else { + ubifs_err("old idx added twice!"); + kfree(old_idx); + return 0; + } + } + rb_link_node(&old_idx->rb, parent, p); + rb_insert_color(&old_idx->rb, &c->old_idx); + return 0; +} + +/** + * insert_old_idx_znode - record a znode obsoleted since last commit start. + * @c: UBIFS file-system description object + * @znode: znode of obsoleted index node + * + * Returns %0 on success, and a negative error code on failure. + */ +int insert_old_idx_znode(struct ubifs_info *c, struct ubifs_znode *znode) +{ + if (znode->parent) { + struct ubifs_zbranch *zbr; + + zbr = &znode->parent->zbranch[znode->iip]; + if (zbr->len) + return insert_old_idx(c, zbr->lnum, zbr->offs); + } else + if (c->zroot.len) + return insert_old_idx(c, c->zroot.lnum, + c->zroot.offs); + return 0; +} + +/** + * ins_clr_old_idx_znode - record a znode obsoleted since last commit start. + * @c: UBIFS file-system description object + * @znode: znode of obsoleted index node + * + * Returns %0 on success, and a negative error code on failure. + */ +static int ins_clr_old_idx_znode(struct ubifs_info *c, + struct ubifs_znode *znode) +{ + int err; + + if (znode->parent) { + struct ubifs_zbranch *zbr; + + zbr = &znode->parent->zbranch[znode->iip]; + if (zbr->len) { + err = insert_old_idx(c, zbr->lnum, zbr->offs); + if (err) + return err; + zbr->lnum = 0; + zbr->offs = 0; + zbr->len = 0; + } + } else + if (c->zroot.len) { + err = insert_old_idx(c, c->zroot.lnum, c->zroot.offs); + if (err) + return err; + c->zroot.lnum = 0; + c->zroot.offs = 0; + c->zroot.len = 0; + } + return 0; +} + +/** + * destroy_old_idx - destroy the old_idx RB-tree. + * @c: UBIFS file-system description object + * + * During start commit, the old_idx RB-tree is used to avoid overwriting index + * nodes that were in the index last commit but have since been deleted. This + * is necessary for recovery i.e. the old index must be kept intact until the + * new index is successfully written. The old-idx RB-tree is used for the + * in-the-gaps method of writing index nodes and is destroyed every commit. + */ +void destroy_old_idx(struct ubifs_info *c) +{ + struct rb_node *this = c->old_idx.rb_node; + struct ubifs_old_idx *old_idx; + + while (this) { + if (this->rb_left) { + this = this->rb_left; + continue; + } else if (this->rb_right) { + this = this->rb_right; + continue; + } + old_idx = rb_entry(this, struct ubifs_old_idx, rb); + this = rb_parent(this); + if (this) { + if (this->rb_left == &old_idx->rb) + this->rb_left = NULL; + else + this->rb_right = NULL; + } + kfree(old_idx); + } + c->old_idx = RB_ROOT; +} + +/** + * copy_znode - copy a dirty znode. + * @c: UBIFS file-system description object + * @znode: znode to copy + * + * A dirty znode being committed may not be changed, so it is copied. + */ +static struct ubifs_znode *copy_znode(struct ubifs_info *c, + struct ubifs_znode *znode) +{ + struct ubifs_znode *zn; + + zn = kmalloc(c->max_znode_sz, GFP_NOFS); + if (unlikely(!zn)) + return ERR_PTR(-ENOMEM); + + memcpy(zn, znode, c->max_znode_sz); + zn->cnext = NULL; + __set_bit(DIRTY_ZNODE, &zn->flags); + __clear_bit(COW_ZNODE, &zn->flags); + + ubifs_assert(!test_bit(OBSOLETE_ZNODE, &znode->flags)); + __set_bit(OBSOLETE_ZNODE, &znode->flags); + + if (znode->level != 0) { + int i; + const int n = zn->child_cnt; + + /* The children now have new parent */ + for (i = 0; i < n; i++) { + struct ubifs_zbranch *zbr = &zn->zbranch[i]; + + if (zbr->znode) + zbr->znode->parent = zn; + } + } + + atomic_long_inc(&c->dirty_zn_cnt); + return zn; +} + +/** + * add_idx_dirt - add dirt due to a dirty znode. + * @c: UBIFS file-system description object + * @lnum: LEB number of index node + * @dirt: size of index node + * + * This function updates lprops dirty space and the new size of the index. + */ +static int add_idx_dirt(struct ubifs_info *c, int lnum, int dirt) +{ + c->calc_idx_sz -= ALIGN(dirt, 8); + return ubifs_add_dirt(c, lnum, dirt); +} + +/** + * dirty_cow_znode - ensure a znode is not being committed. + * @c: UBIFS file-system description object + * @zbr: branch of znode to check + * + * Returns dirtied znode on success or negative error code on failure. + */ +static struct ubifs_znode *dirty_cow_znode(struct ubifs_info *c, + struct ubifs_zbranch *zbr) +{ + struct ubifs_znode *znode = zbr->znode; + struct ubifs_znode *zn; + int err; + + if (!test_bit(COW_ZNODE, &znode->flags)) { + /* znode is not being committed */ + if (!test_and_set_bit(DIRTY_ZNODE, &znode->flags)) { + atomic_long_inc(&c->dirty_zn_cnt); + atomic_long_dec(&c->clean_zn_cnt); + atomic_long_dec(&ubifs_clean_zn_cnt); + err = add_idx_dirt(c, zbr->lnum, zbr->len); + if (unlikely(err)) + return ERR_PTR(err); + } + return znode; + } + + zn = copy_znode(c, znode); + if (unlikely(IS_ERR(zn))) + return zn; + + if (zbr->len) { + err = insert_old_idx(c, zbr->lnum, zbr->offs); + if (unlikely(err)) + return ERR_PTR(err); + err = add_idx_dirt(c, zbr->lnum, zbr->len); + } else + err = 0; + + zbr->znode = zn; + zbr->lnum = 0; + zbr->offs = 0; + zbr->len = 0; + + if (unlikely(err)) + return ERR_PTR(err); + return zn; +} + +/** + * lnc_add - add a leaf node to the leaf node cache. + * @c: UBIFS file-system description object + * @zbr: zbranch of leaf node + * @node: leaf node + * + * Leaf nodes are non-index nodes directory entry nodes or data nodes. The + * purpose of the leaf node cache is to save re-reading the same leaf node over + * and over again. Most things are cached by VFS, however the file system must + * cache directory entries for readdir and for resolving hash collisions. The + * present implementation of the leaf node cache is extremely simple, and + * allows for error returns that are not used but that may be needed if a more + * complex implementation is created. + * + * Note, this function does not add the @node object to LNC directly, but + * allocates a copy of the object and adds the copy to LNC. The reason for this + * is that @node has been allocated outside of the TNC subsystem and will be + * used with @c->tnc_mutex unlock upon return from the TNC subsystem. But LNC + * may be changed at any time, e.g. freed by the shrinker. + */ +static int lnc_add(struct ubifs_info *c, struct ubifs_zbranch *zbr, + const void *node) +{ + int err; + void *lnc_node; + const struct ubifs_dent_node *dent = node; + + ubifs_assert(!zbr->leaf); + ubifs_assert(zbr->len != 0); + ubifs_assert(is_hash_key(c, &zbr->key)); + + err = ubifs_validate_entry(c, dent); + if (err) { + dbg_dump_stack(); + dbg_dump_node(c, dent); + return err; + } + + lnc_node = kmalloc(zbr->len, GFP_NOFS); + if (!lnc_node) + /* We don't have to have the cache, so no error */ + return 0; + + memcpy(lnc_node, node, zbr->len); + zbr->leaf = lnc_node; + return 0; +} + + /** + * lnc_add_directly - add a leaf node to the leaf-node-cache. + * @c: UBIFS file-system description object + * @zbr: zbranch of leaf node + * @node: leaf node + * + * This function is similar to 'lnc_add()', but it does not create a copy of + * @node but inserts @node to TNC directly. + */ +static int lnc_add_directly(struct ubifs_info *c, struct ubifs_zbranch *zbr, + void *node) +{ + int err; + + ubifs_assert(!zbr->leaf); + ubifs_assert(zbr->len != 0); + + err = ubifs_validate_entry(c, node); + if (err) { + dbg_dump_stack(); + dbg_dump_node(c, node); + return err; + } + + zbr->leaf = node; + return 0; +} + +/** + * lnc_free - remove a leaf node from the leaf node cache. + * @zbr: zbranch of leaf node + * @node: leaf node + */ +static void lnc_free(struct ubifs_zbranch *zbr) +{ + if (!zbr->leaf) + return; + kfree(zbr->leaf); + zbr->leaf = NULL; +} + +/** + * tnc_read_node_nm - read a "hashed" leaf node. + * @c: UBIFS file-system description object + * @zbr: key and position of the node + * @node: node is returned here + * + * This function reads a "hashed" node defined by @zbr from the leaf node cache + * (in it is there) or from the hash media, in which case the node is also + * added to LNC. Returns zero in case of success or a negative negative error + * code in case of failure. + */ +static int tnc_read_node_nm(struct ubifs_info *c, struct ubifs_zbranch *zbr, + void *node) +{ + int err; + + ubifs_assert(is_hash_key(c, &zbr->key)); + + if (zbr->leaf) { + /* Read from the leaf node cache */ + ubifs_assert(zbr->len != 0); + memcpy(node, zbr->leaf, zbr->len); + return 0; + } + + err = ubifs_tnc_read_node(c, zbr, node); + if (err) + return err; + + /* Add the node to the leaf node cache */ + err = lnc_add(c, zbr, node); + return err; +} + +/** + * try_read_node - read a node if it is a node. + * @c: UBIFS file-system description object + * @buf: buffer to read to + * @type: node type + * @len: node length (not aligned) + * @lnum: LEB number of node to read + * @offs: offset of node to read + * + * This function tries to read a node of known type and length, checks it and + * stores it in @buf. This function returns %1 if a node is present and %0 if + * a node is not present. A negative error code is returned for I/O errors. + * This function performs that same function as ubifs_read_node except that + * it does not require that there is actually a node present and instead + * the return code indicates if a node was read. + */ +static int try_read_node(const struct ubifs_info *c, void *buf, int type, + int len, int lnum, int offs) +{ + int err, node_len; + struct ubifs_ch *ch = buf; + uint32_t crc, node_crc; + + dbg_io("LEB %d:%d, %s, length %d", lnum, offs, dbg_ntype(type), len); + + err = ubi_read(c->ubi, lnum, buf, offs, len); + if (err) { + ubifs_err("cannot read node type %d from LEB %d:%d, error %d", + type, lnum, offs, err); + return err; + } + + if (le32_to_cpu(ch->magic) != UBIFS_NODE_MAGIC) + return 0; + + if (ch->node_type != type) + return 0; + + node_len = le32_to_cpu(ch->len); + if (node_len != len) + return 0; + + crc = crc32(UBIFS_CRC32_INIT, buf + 8, node_len - 8); + node_crc = le32_to_cpu(ch->crc); + if (crc != node_crc) + return 0; + + return 1; +} + +/** + * fallible_read_node - try to read a leaf node. + * @c: UBIFS file-system description object + * @key: key of node to read + * @zbr: position of node + * @node: node returned + * + * This function tries to read a node and returns %1 if the node is read, %0 + * if the node is not present, and a negative error code in the case of error. + */ +static int fallible_read_node(struct ubifs_info *c, const union ubifs_key *key, + struct ubifs_zbranch *zbr, void *node) +{ + int ret; + + dbg_tnc("LEB %d:%d, key %s", zbr->lnum, zbr->offs, DBGKEY(key)); + + ret = try_read_node(c, node, key_type(c, key), zbr->len, zbr->lnum, + zbr->offs); + if (ret == 1) { + union ubifs_key node_key; + struct ubifs_dent_node *dent = node; + + /* All nodes have key in the same place */ + key_read(c, &dent->key, &node_key); + if (keys_cmp(c, key, &node_key) != 0) + ret = 0; + } + if (ret == 0) + dbg_mnt("dangling branch LEB %d:%d len %d, key %s", + zbr->lnum, zbr->offs, zbr->len, DBGKEY(key)); + return ret; +} + +/** + * matches_name - determine if a direntry or xattr entry matches a given name. + * @c: UBIFS file-system description object + * @zbr: zbranch of dent + * @nm: name to match + * + * This function checks if xentry/direntry referred by zbranch @zbr matches name + * @nm. Returns %NAME_MATCHES if it does, %NAME_LESS if the name referred by + * @zbr is less than @nm, and %NAME_GREATER if it is greater than @nm. In case + * of failure, a negative error code is returned. + */ +static int matches_name(struct ubifs_info *c, struct ubifs_zbranch *zbr, + const struct qstr *nm) +{ + struct ubifs_dent_node *dent; + int nlen, err; + + /* If possible, match against the dent in the leaf node cache */ + if (!zbr->leaf) { + dent = kmalloc(zbr->len, GFP_NOFS); + if (!dent) + return -ENOMEM; + + err = ubifs_tnc_read_node(c, zbr, dent); + if (err) + goto out_free; + + /* Add the node to the leaf node cache */ + err = lnc_add_directly(c, zbr, dent); + if (err) + goto out_free; + } else + dent = zbr->leaf; + + nlen = le16_to_cpu(dent->nlen); + err = memcmp(dent->name, nm->name, min_t(int, nlen, nm->len)); + if (err == 0) { + if (nlen == nm->len) + return NAME_MATCHES; + else if (nlen < nm->len) + return NAME_LESS; + else + return NAME_GREATER; + } else if (err < 0) + return NAME_LESS; + else + return NAME_GREATER; + +out_free: + kfree(dent); + return err; +} + +/** + * get_znode - get a TNC znode that may not be loaded yet. + * @c: UBIFS file-system description object + * @znode: parent znode + * @n: znode branch slot number + * + * This function returns the znode or a negative error code. + */ +static struct ubifs_znode *get_znode(struct ubifs_info *c, + struct ubifs_znode *znode, int n) +{ + struct ubifs_zbranch *zbr; + + zbr = &znode->zbranch[n]; + if (zbr->znode) + znode = zbr->znode; + else + znode = ubifs_load_znode(c, zbr, znode, n); + return znode; +} + +/** + * tnc_next - find next TNC entry. + * @c: UBIFS file-system description object + * @zn: znode is passed and returned here + * @n: znode branch slot number is passed and returned here + * + * This function returns %0 if the next TNC entry is found, %-ENOENT if there is + * no next entry, or a negative error code otherwise. + */ +static int tnc_next(struct ubifs_info *c, struct ubifs_znode **zn, int *n) +{ + struct ubifs_znode *znode = *zn; + int nn = *n; + + nn += 1; + if (nn < znode->child_cnt) { + *n = nn; + return 0; + } + while (1) { + struct ubifs_znode *zp; + + zp = znode->parent; + if (!zp) + return -ENOENT; + nn = znode->iip + 1; + znode = zp; + if (nn < znode->child_cnt) { + znode = get_znode(c, znode, nn); + if (IS_ERR(znode)) + return PTR_ERR(znode); + while (znode->level != 0) { + znode = get_znode(c, znode, 0); + if (IS_ERR(znode)) + return PTR_ERR(znode); + } + nn = 0; + break; + } + } + *zn = znode; + *n = nn; + return 0; +} + +/** + * tnc_prev - find previous TNC entry. + * @c: UBIFS file-system description object + * @zn: znode is returned here + * @n: znode branch slot number is passed and returned here + * + * This function returns %0 if the previous TNC entry is found, %-ENOENT if + * there is no next entry, or a negative error code otherwise. + */ +static int tnc_prev(struct ubifs_info *c, struct ubifs_znode **zn, int *n) +{ + struct ubifs_znode *znode = *zn; + int nn = *n; + + if (nn > 0) { + *n = nn - 1; + return 0; + } + while (1) { + struct ubifs_znode *zp; + + zp = znode->parent; + if (!zp) + return -ENOENT; + nn = znode->iip - 1; + znode = zp; + if (nn >= 0) { + znode = get_znode(c, znode, nn); + if (IS_ERR(znode)) + return PTR_ERR(znode); + while (znode->level != 0) { + nn = znode->child_cnt - 1; + znode = get_znode(c, znode, nn); + if (IS_ERR(znode)) + return PTR_ERR(znode); + } + nn = znode->child_cnt - 1; + break; + } + } + *zn = znode; + *n = nn; + return 0; +} + +/** + * resolve_collision - resolve a collision. + * @c: UBIFS file-system description object + * @key: key of a directory or extended attribute entry + * @zn: znode is returned here + * @n: zbranch number is passed and returned here + * @nm: name of the entry + * + * This function is called for "hashed" keys to make sure that the found key + * really corresponds to the looked up node (directory or extended attribute + * entry). It returns %1 and sets @zn and @n if the collision is resolved. + * %0 is returned if @nm is not found and @zn and @n are set to the previous + * entry, i.e. to the entry after which @nm could follow if it were in TNC. + * This means that @n may be set to %-1 if the leftmost key in @zn is the + * previous one. A negative error code is returned on failures. + */ +static int resolve_collision(struct ubifs_info *c, const union ubifs_key *key, + struct ubifs_znode **zn, int *n, + const struct qstr *nm) +{ + int err; + + err = matches_name(c, &(*zn)->zbranch[*n], nm); + if (unlikely(err < 0)) + return err; + if (err == NAME_MATCHES) + return 1; + + if (err == NAME_GREATER) { + /* Look left */ + while (1) { + err = tnc_prev(c, zn, n); + if (err == -ENOENT) { + ubifs_assert(*n == 0); + *n = -1; + return 0; + } + if (err < 0) + return err; + if (keys_cmp(c, &(*zn)->zbranch[*n].key, key)) { + /* + * We have found the branch after which we would + * like to insert, but inserting in this znode + * may still be wrong. Consider the following 3 + * znodes, in the case where we are resolving a + * collision with Key2. + * + * znode zp + * ---------------------- + * level 1 | Key0 | Key1 | + * ----------------------- + * | | + * znode za | | znode zb + * ------------ ------------ + * level 0 | Key0 | | Key2 | + * ------------ ------------ + * + * The lookup finds Key2 in znode zb. Lets say + * there is no match and the name is greater so + * we look left. When we find Key0, we end up + * here. If we return now, we will insert into + * znode za at slot n = 1. But that is invalid + * according to the parent's keys. Key2 must + * be inserted into znode zb. + * + * Note, this problem is not relevant for the + * case when we go right, because + * 'tnc_insert()' would correct the parent key. + */ + if (*n == (*zn)->child_cnt - 1) { + err = tnc_next(c, zn, n); + if (err) { + /* Should be impossible */ + ubifs_assert(0); + if (err == -ENOENT) + err = -EINVAL; + return err; + } + ubifs_assert(*n == 0); + *n = -1; + } + return 0; + } + err = matches_name(c, &(*zn)->zbranch[*n], nm); + if (err < 0) + return err; + if (err == NAME_LESS) + return 0; + if (err == NAME_MATCHES) + return 1; + ubifs_assert(err == NAME_GREATER); + } + } else { + int nn = *n; + struct ubifs_znode *znode = *zn; + + /* Look right */ + while (1) { + err = tnc_next(c, &znode, &nn); + if (err == -ENOENT) + return 0; + if (err < 0) + return err; + if (keys_cmp(c, &znode->zbranch[nn].key, key)) + return 0; + err = matches_name(c, &znode->zbranch[nn], nm); + if (err < 0) + return err; + if (err == NAME_GREATER) + return 0; + *zn = znode; + *n = nn; + if (err == NAME_MATCHES) + return 1; + ubifs_assert(err == NAME_LESS); + } + } +} + +/** + * fallible_matches_name - determine if a dent matches a given name. + * @c: UBIFS file-system description object + * @zbr: zbranch of dent + * @nm: name to match + * + * This is a "fallible" version of 'matches_name()' function which does not + * panic if the direntry/xentry referred by @zbr does not exist on the media. + * + * This function checks if xentry/direntry referred by zbranch @zbr matches name + * @nm. Returns %NAME_MATCHES it does, %NAME_LESS if the name referred by @zbr + * is less than @nm, %NAME_GREATER if it is greater than @nm, and @NOT_ON_MEDIA + * if xentry/direntry referred by @zbr does not exist on the media. A negative + * error code is returned in case of failure. + */ +static int fallible_matches_name(struct ubifs_info *c, + struct ubifs_zbranch *zbr, + const struct qstr *nm) +{ + struct ubifs_dent_node *dent; + int nlen, err; + + /* If possible, match against the dent in the leaf node cache */ + if (!zbr->leaf) { + dent = kmalloc(zbr->len, GFP_NOFS); + if (!dent) + return -ENOMEM; + + err = fallible_read_node(c, &zbr->key, zbr, dent); + if (err < 0) + goto out_free; + if (err == 0) { + /* The node was not present */ + err = NOT_ON_MEDIA; + goto out_free; + } + ubifs_assert(err == 1); + + err = lnc_add_directly(c, zbr, dent); + if (err) + goto out_free; + } else + dent = zbr->leaf; + + nlen = le16_to_cpu(dent->nlen); + err = memcmp(dent->name, nm->name, min_t(int, nlen, nm->len)); + if (err == 0) { + if (nlen == nm->len) + return NAME_MATCHES; + else if (nlen < nm->len) + return NAME_LESS; + else + return NAME_GREATER; + } else if (err < 0) + return NAME_LESS; + else + return NAME_GREATER; + +out_free: + kfree(dent); + return err; +} + +/** + * fallible_resolve_collision - resolve a collision even if nodes are missing. + * @c: UBIFS file-system description object + * @key: key + * @zn: znode is returned here + * @n: branch number is passed and returned here + * @nm: name of directory entry + * @adding: indicates caller is adding a key to the TNC + * + * This is a "fallible" version of the 'resolve_collision()' function which + * does not panic if one of the nodes referred to by TNC does not exist on the + * media. This may happen when replaying the journal if a deleted node was + * Garbage-collected and the commit was not done. A branch that refers to a node + * that is not present is called a dangling branch. The following are the return + * codes for this function: + * o if @nm was found, %1 is returned and @zn and @n are set to the found + * branch; + * o if we are @adding and @nm was not found, %0 is returned; + * o if we are not @adding and @nm was not found, but a dangling branch was + * found, then %1 is returned and @zn and @n are set to the dangling branch; + * o a negative error code is returned in case of failure. + */ +static int fallible_resolve_collision(struct ubifs_info *c, + const union ubifs_key *key, + struct ubifs_znode **zn, int *n, + const struct qstr *nm, int adding) +{ + struct ubifs_znode *o_znode = NULL, *znode = *zn; + int uninitialized_var(o_n), err, cmp, unsure = 0, nn = *n; + + cmp = fallible_matches_name(c, &znode->zbranch[nn], nm); + if (unlikely(cmp < 0)) + return cmp; + if (cmp == NAME_MATCHES) + return 1; + if (cmp == NOT_ON_MEDIA) { + o_znode = znode; + o_n = nn; + /* + * We are unlucky and hit a dangling branch straight away. + * Now we do not really know where to go to find the needed + * branch - to the left or to the right. Well, let's try left. + */ + unsure = 1; + } else if (!adding) + unsure = 1; /* Remove a dangling branch wherever it is */ + + if (cmp == NAME_GREATER || unsure) { + /* Look left */ + while (1) { + err = tnc_prev(c, zn, n); + if (err == -ENOENT) { + ubifs_assert(*n == 0); + *n = -1; + break; + } + if (err < 0) + return err; + if (keys_cmp(c, &(*zn)->zbranch[*n].key, key)) { + /* See comments in 'resolve_collision()' */ + if (*n == (*zn)->child_cnt - 1) { + err = tnc_next(c, zn, n); + if (err) { + /* Should be impossible */ + ubifs_assert(0); + if (err == -ENOENT) + err = -EINVAL; + return err; + } + ubifs_assert(*n == 0); + *n = -1; + } + break; + } + err = fallible_matches_name(c, &(*zn)->zbranch[*n], nm); + if (err < 0) + return err; + if (err == NAME_MATCHES) + return 1; + if (err == NOT_ON_MEDIA) { + o_znode = *zn; + o_n = *n; + continue; + } + if (!adding) + continue; + if (err == NAME_LESS) + break; + else + unsure = 0; + } + } + + if (cmp == NAME_LESS || unsure) { + /* Look right */ + *zn = znode; + *n = nn; + while (1) { + err = tnc_next(c, &znode, &nn); + if (err == -ENOENT) + break; + if (err < 0) + return err; + if (keys_cmp(c, &znode->zbranch[nn].key, key)) + break; + err = fallible_matches_name(c, &znode->zbranch[nn], nm); + if (err < 0) + return err; + if (err == NAME_GREATER) + break; + *zn = znode; + *n = nn; + if (err == NAME_MATCHES) + return 1; + if (err == NOT_ON_MEDIA) { + o_znode = znode; + o_n = nn; + } + } + } + + /* Never match a dangling branch when adding */ + if (adding || !o_znode) + return 0; + + dbg_mnt("dangling match LEB %d:%d len %d %s", + o_znode->zbranch[o_n].lnum, o_znode->zbranch[o_n].offs, + o_znode->zbranch[o_n].len, DBGKEY(key)); + *zn = o_znode; + *n = o_n; + return 1; +} + +/** + * matches_position - determine if a zbranch matches a given position. + * @zbr: zbranch of dent + * @lnum: LEB number of dent to match + * @offs: offset of dent to match + * + * This function returns %1 if @lnum:@offs matches, and %0 otherwise. + */ +static int matches_position(struct ubifs_zbranch *zbr, int lnum, int offs) +{ + if (zbr->lnum == lnum && zbr->offs == offs) + return 1; + else + return 0; +} + +/** + * resolve_collision_directly - resolve a collision directly. + * @c: UBIFS file-system description object + * @key: key of directory entry + * @zn: znode is passed and returned here + * @n: zbranch number is passed and returned here + * @lnum: LEB number of dent node to match + * @offs: offset of dent node to match + * + * This function is used for "hashed" keys to make sure the found directory or + * extended attribute entry node is what was looked for. It is used when the + * flash address of the right node is known (@lnum:@offs) which makes it much + * easier to resolve collisions (no need to read entries and match full + * names). This function returns %1 and sets @zn and @n if the collision is + * resolved, %0 if @lnum:@offs is not found and @zn and @n are set to the + * previous directory entry. Otherwise a negative error code is returned. + */ +static int resolve_collision_directly(struct ubifs_info *c, + const union ubifs_key *key, + struct ubifs_znode **zn, int *n, + int lnum, int offs) +{ + struct ubifs_znode *znode; + int nn, err; + + znode = *zn; + nn = *n; + if (matches_position(&znode->zbranch[nn], lnum, offs)) + return 1; + + /* Look left */ + while (1) { + err = tnc_prev(c, &znode, &nn); + if (err == -ENOENT) + break; + if (err < 0) + return err; + if (keys_cmp(c, &znode->zbranch[nn].key, key)) + break; + if (matches_position(&znode->zbranch[nn], lnum, offs)) { + *zn = znode; + *n = nn; + return 1; + } + } + + /* Look right */ + znode = *zn; + nn = *n; + while (1) { + err = tnc_next(c, &znode, &nn); + if (err == -ENOENT) + return 0; + if (err < 0) + return err; + if (keys_cmp(c, &znode->zbranch[nn].key, key)) + return 0; + *zn = znode; + *n = nn; + if (matches_position(&znode->zbranch[nn], lnum, offs)) + return 1; + } +} + +/** + * dirty_cow_bottom_up - dirty a znode and its ancestors. + * @c: UBIFS file-system description object + * @znode: znode to dirty + * + * If we do not have a unique key that resides in a znode, then we cannot + * dirty that znode from the top down (i.e. by using lookup_level0_dirty) + * This function records the path back to the last dirty ancestor, and then + * dirties the znodes on that path. + */ +static struct ubifs_znode *dirty_cow_bottom_up(struct ubifs_info *c, + struct ubifs_znode *znode) +{ + struct ubifs_znode *zp; + int *path = c->bottom_up_buf, p = 0; + + ubifs_assert(c->zroot.znode); + ubifs_assert(znode); + if (c->zroot.znode->level > BOTTOM_UP_HEIGHT) { + kfree(c->bottom_up_buf); + c->bottom_up_buf = kmalloc(c->zroot.znode->level * sizeof(int), + GFP_NOFS); + if (!c->bottom_up_buf) + return ERR_PTR(-ENOMEM); + path = c->bottom_up_buf; + } + if (c->zroot.znode->level) { + /* Go up until parent is dirty */ + while (1) { + int n; + + zp = znode->parent; + if (!zp) + break; + n = znode->iip; + ubifs_assert(p < c->zroot.znode->level); + path[p++] = n; + if (!zp->cnext && ubifs_zn_dirty(znode)) + break; + znode = zp; + } + } + + /* Come back down, dirtying as we go */ + while (1) { + struct ubifs_zbranch *zbr; + + zp = znode->parent; + if (zp) { + ubifs_assert(path[p - 1] >= 0); + ubifs_assert(path[p - 1] < zp->child_cnt); + zbr = &zp->zbranch[path[--p]]; + znode = dirty_cow_znode(c, zbr); + } else { + ubifs_assert(znode == c->zroot.znode); + znode = dirty_cow_znode(c, &c->zroot); + } + if (unlikely(IS_ERR(znode)) || !p) + break; + ubifs_assert(path[p - 1] >= 0); + ubifs_assert(path[p - 1] < znode->child_cnt); + znode = znode->zbranch[path[p - 1]].znode; + } + + return znode; +} + +/** + * ubifs_lookup_level0 - search for zero-level znode. + * @c: UBIFS file-system description object + * @key: key to lookup + * @zn: znode is returned here + * @n: znode branch slot number is returned here + * + * This function looks up the TNC tree and search for zero-level znode which + * refers key @key. The found zero-level znode is returned in @zn. There are 3 + * cases: + * o exact match, i.e. the found zero-level znode contains key @key, then %1 + * is returned and slot number of the matched branch is stored in @n; + * o not exact match, which means that zero-level znode does not contain + * @key, then %0 is returned and slot number of the closed branch is stored + * in @n; + * o @key is so small that it is even less than the lowest key of the + * leftmost zero-level node, then %0 is returned and %0 is stored in @n. + * + * Note, when the TNC tree is traversed, some znodes may be absent, then this + * function reads corresponding indexing nodes and inserts them to TNC. In + * case of failure, a negative error code is returned. + */ +int ubifs_lookup_level0(struct ubifs_info *c, const union ubifs_key *key, + struct ubifs_znode **zn, int *n) +{ + int err, exact; + struct ubifs_znode *znode; + unsigned long time = get_seconds(); + + dbg_tnc("search key %s", DBGKEY(key)); + + znode = c->zroot.znode; + if (unlikely(!znode)) { + znode = ubifs_load_znode(c, &c->zroot, NULL, 0); + if (IS_ERR(znode)) + return PTR_ERR(znode); + } + + znode->time = time; + + while (1) { + struct ubifs_zbranch *zbr; + + exact = ubifs_search_zbranch(c, znode, key, n); + + if (znode->level == 0) + break; + + if (*n < 0) + *n = 0; + zbr = &znode->zbranch[*n]; + + if (zbr->znode) { + znode->time = time; + znode = zbr->znode; + continue; + } + + /* znode is not in TNC cache, load it from the media */ + znode = ubifs_load_znode(c, zbr, znode, *n); + if (IS_ERR(znode)) + return PTR_ERR(znode); + } + + *zn = znode; + if (exact || !is_hash_key(c, key) || *n != -1) { + dbg_tnc("found %d, lvl %d, n %d", exact, znode->level, *n); + return exact; + } + + /* + * Here is a tricky place. We have not found the key and this is a + * "hashed" key, which may collide. The rest of the code deals with + * situations like this: + * + * | 3 | 5 | + * / \ + * | 3 | 5 | | 6 | 7 | (x) + * + * Or more a complex example: + * + * | 1 | 5 | + * / \ + * | 1 | 3 | | 5 | 8 | + * \ / + * | 5 | 5 | | 6 | 7 | (x) + * + * In the examples, if we are looking for key "5", we may reach nodes + * marked with "(x)". In this case what we have do is to look at the + * left and see if there is "5" key there. If there is, we have to + * return it. + * + * Note, this whole situation is possible because we allow to have + * elements which are equivalent to the next key in the parent in the + * children of current znode. For example, this happens if we split a + * znode like this: | 3 | 5 | 5 | 6 | 7 |, which results in something + * like this: + * | 3 | 5 | + * / \ + * | 3 | 5 | | 5 | 6 | 7 | + * ^ + * And this becomes what is at the first "picture" after key "5" marked + * with "^" is removed. What could be done is we could prohibit + * splitting in the middle of the colliding sequence. Also, when + * removing the leftmost key, we would have to correct the key of the + * parent node, which would introduce additional complications. Namely, + * if we changed the the leftmost key of the parent znode, the garbage + * collector would be unable to find it (GC is doing this when GC'ing + * indexing LEBs). Although we already have an additional RB-tree where + * we save such changed znodes (see 'ins_clr_old_idx_znode()') until + * after the commit. But anyway, this does not look easy to implement + * so we did not try this. + */ + err = tnc_prev(c, &znode, n); + if (err == -ENOENT) { + dbg_tnc("found 0, lvl %d, n -1", znode->level); + *n = -1; + return 0; + } + if (unlikely(err < 0)) + return err; + if (keys_cmp(c, key, &znode->zbranch[*n].key)) { + dbg_tnc("found 0, lvl %d, n -1", znode->level); + *n = -1; + return 0; + } + + dbg_tnc("found 1, lvl %d, n %d", znode->level, *n); + *zn = znode; + return 1; +} + +/** + * lookup_level0_dirty - search for zero-level znode dirtying. + * @c: UBIFS file-system description object + * @key: key to lookup + * @zn: znode is returned here + * @n: znode branch slot number is returned here + * + * This function looks up the TNC tree and search for zero-level znode which + * refers key @key. The found zero-level znode is returned in @zn. There are 3 + * cases: + * o exact match, i.e. the found zero-level znode contains key @key, then %1 + * is returned and slot number of the matched branch is stored in @n; + * o not exact match, which means that zero-level znode does not contain @key + * then %0 is returned and slot number of the closed branch is stored in + * @n; + * o @key is so small that it is even less than the lowest key of the + * leftmost zero-level node, then %0 is returned and %-1 is stored in @n. + * + * Additionally all znodes in the path from the root to the located zero-level + * znode are marked as dirty. + * + * Note, when the TNC tree is traversed, some znodes may be absent, then this + * function reads corresponding indexing nodes and inserts them to TNC. In + * case of failure, a negative error code is returned. + */ +static int lookup_level0_dirty(struct ubifs_info *c, const union ubifs_key *key, + struct ubifs_znode **zn, int *n) +{ + int err, exact; + struct ubifs_znode *znode; + unsigned long time = get_seconds(); + + dbg_tnc("search and dirty key %s", DBGKEY(key)); + + znode = c->zroot.znode; + if (unlikely(!znode)) { + znode = ubifs_load_znode(c, &c->zroot, NULL, 0); + if (IS_ERR(znode)) + return PTR_ERR(znode); + } + + znode = dirty_cow_znode(c, &c->zroot); + if (IS_ERR(znode)) + return PTR_ERR(znode); + + znode->time = time; + + while (1) { + struct ubifs_zbranch *zbr; + + exact = ubifs_search_zbranch(c, znode, key, n); + + if (znode->level == 0) + break; + + if (*n < 0) + *n = 0; + zbr = &znode->zbranch[*n]; + + if (zbr->znode) { + znode->time = time; + znode = dirty_cow_znode(c, zbr); + if (IS_ERR(znode)) + return PTR_ERR(znode); + continue; + } + + /* znode is not in TNC cache, load it from the media */ + znode = ubifs_load_znode(c, zbr, znode, *n); + if (IS_ERR(znode)) + return PTR_ERR(znode); + znode = dirty_cow_znode(c, zbr); + if (IS_ERR(znode)) + return PTR_ERR(znode); + } + + *zn = znode; + if (exact || !is_hash_key(c, key) || *n != -1) { + dbg_tnc("found %d, lvl %d, n %d", exact, znode->level, *n); + return exact; + } + + /* + * See huge comment at 'lookup_level0_dirty()' what is the rest of the + * code. + */ + err = tnc_prev(c, &znode, n); + if (err == -ENOENT) { + *n = -1; + dbg_tnc("found 0, lvl %d, n -1", znode->level); + return 0; + } + if (unlikely(err < 0)) + return err; + if (keys_cmp(c, key, &znode->zbranch[*n].key)) { + *n = -1; + dbg_tnc("found 0, lvl %d, n -1", znode->level); + return 0; + } + + if (znode->cnext || !ubifs_zn_dirty(znode)) { + znode = dirty_cow_bottom_up(c, znode); + if (IS_ERR(znode)) + return PTR_ERR(znode); + } + + dbg_tnc("found 1, lvl %d, n %d", znode->level, *n); + *zn = znode; + return 1; +} + +/** + * ubifs_tnc_lookup - look up a file-system node. + * @c: UBIFS file-system description object + * @key: node key to lookup + * @node: the node is returned here + * + * This function look up and reads node with key @key. The caller has to make + * sure the @node buffer is large enough to fit the node. Returns zero in case + * of success, %-ENOENT if the node was not found, and a negative error code in + * case of failure. + */ +int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key, + void *node) +{ + int found, n, err; + struct ubifs_znode *znode; + struct ubifs_zbranch zbr, *zt; + + mutex_lock(&c->tnc_mutex); + found = ubifs_lookup_level0(c, key, &znode, &n); + if (!found) { + err = -ENOENT; + goto out; + } else if (found < 0) { + err = found; + goto out; + } + zt = &znode->zbranch[n]; + if (is_hash_key(c, key)) { + /* + * In this case the leaf node cache gets used, so we pass the + * address of the zbranch and keep the mutex locked + */ + err = tnc_read_node_nm(c, zt, node); + goto out; + } + zbr = znode->zbranch[n]; + mutex_unlock(&c->tnc_mutex); + + err = ubifs_tnc_read_node(c, &zbr, node); + return err; + +out: + mutex_unlock(&c->tnc_mutex); + return err; +} + +/** + * ubifs_tnc_locate - look up a file-system node and return it and its location. + * @c: UBIFS file-system description object + * @key: node key to lookup + * @node: the node is returned here + * @lnum: LEB number is returned here + * @offs: offset is returned here + * + * This function is the same as 'ubifs_tnc_lookup()' but it returns the node + * location also. See 'ubifs_tnc_lookup()'. + */ +int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key, + void *node, int *lnum, int *offs) +{ + int found, n, err; + struct ubifs_znode *znode; + struct ubifs_zbranch zbr, *zt; + + mutex_lock(&c->tnc_mutex); + found = ubifs_lookup_level0(c, key, &znode, &n); + if (!found) { + err = -ENOENT; + goto out; + } else if (found < 0) { + err = found; + goto out; + } + zt = &znode->zbranch[n]; + if (is_hash_key(c, key)) { + /* + * In this case the leaf node cache gets used, so we pass the + * address of the zbranch and keep the mutex locked + */ + *lnum = zt->lnum; + *offs = zt->offs; + err = tnc_read_node_nm(c, zt, node); + goto out; + } + zbr = znode->zbranch[n]; + mutex_unlock(&c->tnc_mutex); + + *lnum = zbr.lnum; + *offs = zbr.offs; + + err = ubifs_tnc_read_node(c, &zbr, node); + return err; + +out: + mutex_unlock(&c->tnc_mutex); + return err; +} + +/** + * do_lookup_nm- look up a "hashed" node. + * @c: UBIFS file-system description object + * @key: node key to lookup + * @node: the node is returned here + * @nm: node name + * + * This function look up and reads a node which contains name hash in the key. + * Since the hash may have collisions, there may be many nodes with the same + * key, so we have to sequentially look to all of them until the needed one is + * found. This function returns zero in case of success, %-ENOENT if the node + * was not found, and a negative error code in case of failure. + */ +static int do_lookup_nm(struct ubifs_info *c, const union ubifs_key *key, + void *node, const struct qstr *nm) +{ + int found, n, err; + struct ubifs_znode *znode; + struct ubifs_zbranch zbr; + + dbg_tnc("name '%.*s' key %s", nm->len, nm->name, DBGKEY(key)); + mutex_lock(&c->tnc_mutex); + found = ubifs_lookup_level0(c, key, &znode, &n); + if (!found) { + err = -ENOENT; + goto out_unlock; + } else if (found < 0) { + err = found; + goto out_unlock; + } + + ubifs_assert(n >= 0); + + err = resolve_collision(c, key, &znode, &n, nm); + dbg_tnc("rc returned %d, znode %p, n %d", err, znode, n); + if (unlikely(err < 0)) + goto out_unlock; + if (err == 0) { + err = -ENOENT; + goto out_unlock; + } + + zbr = znode->zbranch[n]; + mutex_unlock(&c->tnc_mutex); + + err = tnc_read_node_nm(c, &zbr, node); + return err; + +out_unlock: + mutex_unlock(&c->tnc_mutex); + return err; +} + +/** + * ubifs_tnc_lookup_nm - look up a "hashed" node. + * @c: UBIFS file-system description object + * @key: node key to lookup + * @node: the node is returned here + * @nm: node name + * + * This function look up and reads a node which contains name hash in the key. + * Since the hash may have collisions, there may be many nodes with the same + * key, so we have to sequentially look to all of them until the needed one is + * found. This function returns zero in case of success, %-ENOENT if the node + * was not found, and a negative error code in case of failure. + */ +int ubifs_tnc_lookup_nm(struct ubifs_info *c, const union ubifs_key *key, + void *node, const struct qstr *nm) +{ + int err, len; + const struct ubifs_dent_node *dent = node; + + /* + * We assume that in most of the cases there are no name collisions and + * 'ubifs_tnc_lookup()' returns us the right direntry. + */ + err = ubifs_tnc_lookup(c, key, node); + if (err) + return err; + + len = le16_to_cpu(dent->nlen); + if (nm->len == len && !memcmp(dent->name, nm->name, len)) + return 0; + + /* + * Unluckily, there are hash collisions and we have to iterate over + * them look at each direntry with colliding name hash sequentially. + */ + return do_lookup_nm(c, key, node, nm); +} + +/** + * correct_parent_keys - correct parent znodes' keys. + * @c: UBIFS file-system description object + * @znode: znode to correct parent znodes for + * + * This is a helper function for 'tnc_insert()'. When the key of the leftmost + * zbranch changes, keys of parent znodes have to be corrected. This helper + * function is called in such situations and corrects the keys if needed. + */ +static void correct_parent_keys(const struct ubifs_info *c, + struct ubifs_znode *znode) +{ + union ubifs_key *key, *key1; + + ubifs_assert(znode->parent); + ubifs_assert(znode->iip == 0); + + key = &znode->zbranch[0].key; + key1 = &znode->parent->zbranch[0].key; + + while (keys_cmp(c, key, key1) < 0) { + key_copy(c, key, key1); + znode = znode->parent; + znode->alt = 1; + if (!znode->parent || znode->iip) + break; + key1 = &znode->parent->zbranch[0].key; + } +} + +/** + * insert_zbranch - insert a zbranch into a znode. + * @znode: znode into which to insert + * @zbr: zbranch to insert + * @n: slot number to insert to + * + * This is a helper function for 'tnc_insert()'. UBIFS does not allow "gaps" in + * znode's array of zbranches and keeps zbranches consolidated, so when a new + * zbranch has to be inserted to the @znode->zbranches[]' array at the @n-th + * slot, zbranches starting from @n have to be moved right. + */ +static void insert_zbranch(struct ubifs_znode *znode, + const struct ubifs_zbranch *zbr, int n) +{ + int i; + + ubifs_assert(ubifs_zn_dirty(znode)); + + if (znode->level) { + for (i = znode->child_cnt; i > n; i--) { + znode->zbranch[i] = znode->zbranch[i - 1]; + if (znode->zbranch[i].znode) + znode->zbranch[i].znode->iip = i; + } + if (zbr->znode) + zbr->znode->iip = n; + } else + for (i = znode->child_cnt; i > n; i--) + znode->zbranch[i] = znode->zbranch[i - 1]; + + znode->zbranch[n] = *zbr; + znode->child_cnt += 1; + + /* + * After inserting at slot zero, the lower bound of the key range of + * this znode may have changed. If this znode is subsequently split + * then the upper bound of the key range may change, and furthermore + * it could change to be lower than the original lower bound. If that + * happens, then it will no longer be possible to find this znode in the + * TNC using the key from the index node on flash. That is bad because + * if it is not found, we will assume it is obsolete and may overwrite + * it. Then if there is an unclean unmount, we will start using the + * old index which will be broken. + * + * So we first mark znodes that have insertions at slot zero, and then + * if they are split we add their lnum/offs to the old_idx tree. + */ + if (n == 0) + znode->alt = 1; +} + +/** + * tnc_insert - insert a node into TNC. + * @c: UBIFS file-system description object + * @znode: znode to insert into + * @zbr: branch to insert + * @n: slot number to insert new zbranch to + * + * This function inserts a new node described by @zbr into znode @znode. If + * znode does not have a free slot for new zbranch, it is split. Parent znodes + * are splat as well if needed. Returns zero in case of success or a negative + * error code in case of failure. + */ +static int tnc_insert(struct ubifs_info *c, struct ubifs_znode *znode, + struct ubifs_zbranch *zbr, int n) +{ + struct ubifs_znode *zn, *zi, *zp; + int i, keep, move, appending = 0; + union ubifs_key *key = &zbr->key; + + ubifs_assert(n >= 0 && n <= c->fanout); + + /* Implement naive insert for now */ +again: + zp = znode->parent; + if (znode->child_cnt < c->fanout) { + ubifs_assert(n != c->fanout); + dbg_tnc("inserted at %d level %d, key %s", n, znode->level, + DBGKEY(key)); + + insert_zbranch(znode, zbr, n); + + /* Ensure parent's key is correct */ + if (n == 0 && zp && znode->iip == 0) + correct_parent_keys(c, znode); + + return 0; + } + + /* + * Unfortunately, @znode does not have more empty slots and we have to + * split it. + */ + dbg_tnc("splitting level %d, key %s", znode->level, DBGKEY(key)); + + if (znode->alt) + /* + * We can no longer be sure of finding this znode by key, so we + * record it in the old_idx tree. + */ + ins_clr_old_idx_znode(c, znode); + + zn = kzalloc(c->max_znode_sz, GFP_NOFS); + if (!zn) + return -ENOMEM; + zn->parent = zp; + zn->level = znode->level; + + /* Decide where to split */ + if (znode->level == 0 && n == c->fanout && + key_type(c, key) == UBIFS_DATA_KEY) { + union ubifs_key *key1; + + /* + * If this is an inode which is being appended - do not split + * it because no other zbranches can be inserted between + * zbranches of consecutive data nodes anyway. + */ + key1 = &znode->zbranch[n - 1].key; + if (key_inum(c, key1) == key_inum(c, key) && + key_type(c, key1) == UBIFS_DATA_KEY && + key_block(c, key1) == key_block(c, key) - 1) + appending = 1; + } + + if (appending) { + keep = c->fanout; + move = 0; + } else { + keep = (c->fanout + 1) / 2; + move = c->fanout - keep; + } + + /* + * Although we don't at present, we could look at the neighbors and see + * if we can move some zbranches there. + */ + + if (n < keep) { + /* Insert into existing znode */ + zi = znode; + move += 1; + keep -= 1; + } else { + /* Insert into new znode */ + zi = zn; + n -= keep; + /* Re-parent */ + if (zn->level != 0) + zbr->znode->parent = zn; + } + + __set_bit(DIRTY_ZNODE, &zn->flags); + atomic_long_inc(&c->dirty_zn_cnt); + + zn->child_cnt = move; + znode->child_cnt = keep; + + dbg_tnc("moving %d, keeping %d", move, keep); + + /* Move zbranch */ + for (i = 0; i < move; i++) { + zn->zbranch[i] = znode->zbranch[keep + i]; + /* Re-parent */ + if (zn->level != 0) + if (zn->zbranch[i].znode) { + zn->zbranch[i].znode->parent = zn; + zn->zbranch[i].znode->iip = i; + } + } + + /* Insert new key and branch */ + dbg_tnc("inserting at %d level %d, key %s", n, zn->level, DBGKEY(key)); + + insert_zbranch(zi, zbr, n); + + /* Insert new znode (produced by spitting) into the parent */ + if (zp) { + i = n; + /* Locate insertion point */ + n = znode->iip + 1; + if (appending && n != c->fanout) + appending = 0; + + if (i == 0 && zi == znode && znode->iip == 0) + correct_parent_keys(c, znode); + + /* Tail recursion */ + zbr->key = zn->zbranch[0].key; + zbr->znode = zn; + zbr->lnum = 0; + zbr->offs = 0; + zbr->len = 0; + znode = zp; + + goto again; + } + + /* We have to split root znode */ + dbg_tnc("creating new zroot at level %d", znode->level + 1); + + zi = kzalloc(c->max_znode_sz, GFP_NOFS); + if (!zi) + return -ENOMEM; + + zi->child_cnt = 2; + zi->level = znode->level + 1; + + __set_bit(DIRTY_ZNODE, &zi->flags); + atomic_long_inc(&c->dirty_zn_cnt); + + zi->zbranch[0].key = znode->zbranch[0].key; + zi->zbranch[0].znode = znode; + zi->zbranch[0].lnum = c->zroot.lnum; + zi->zbranch[0].offs = c->zroot.offs; + zi->zbranch[0].len = c->zroot.len; + zi->zbranch[1].key = zn->zbranch[0].key; + zi->zbranch[1].znode = zn; + + c->zroot.lnum = 0; + c->zroot.offs = 0; + c->zroot.len = 0; + c->zroot.znode = zi; + + zn->parent = zi; + zn->iip = 1; + znode->parent = zi; + znode->iip = 0; + + return 0; +} + +/** + * ubifs_tnc_add - add a node to TNC. + * @c: UBIFS file-system description object + * @key: key to add + * @lnum: LEB number of node + * @offs: node offset + * @len: node length + * + * This function adds a node with key @key to TNC. The node may be new or it may + * obsolete some existing one. Returns %0 on success or negative error code on + * failure. + */ +int ubifs_tnc_add(struct ubifs_info *c, const union ubifs_key *key, int lnum, + int offs, int len) +{ + int found, n, err = 0; + struct ubifs_znode *znode; + + mutex_lock(&c->tnc_mutex); + dbg_tnc("%d:%d, len %d, key %s", lnum, offs, len, DBGKEY(key)); + found = lookup_level0_dirty(c, key, &znode, &n); + if (!found) { + struct ubifs_zbranch zbr; + + zbr.znode = NULL; + zbr.lnum = lnum; + zbr.offs = offs; + zbr.len = len; + key_copy(c, key, &zbr.key); + err = tnc_insert(c, znode, &zbr, n + 1); + } else if (found == 1) { + struct ubifs_zbranch *zbr = &znode->zbranch[n]; + + lnc_free(zbr); + err = ubifs_add_dirt(c, zbr->lnum, zbr->len); + zbr->lnum = lnum; + zbr->offs = offs; + zbr->len = len; + } else + err = found; + if (!err) + err = dbg_check_tnc(c, 0); + mutex_unlock(&c->tnc_mutex); + + return err; +} + +/** + * ubifs_tnc_replace - replace a node in the TNC only if the old node is found. + * @c: UBIFS file-system description object + * @key: key to add + * @old_lnum: LEB number of old node + * @old_offs: old node offset + * @lnum: LEB number of node + * @offs: node offset + * @len: node length + * + * This function replaces a node with key @key in the TNC only if the old node + * is found. This function is called by garbage collection when node are moved. + * Returns %0 on success or negative error code on failure. + */ +int ubifs_tnc_replace(struct ubifs_info *c, const union ubifs_key *key, + int old_lnum, int old_offs, int lnum, int offs, int len) +{ + int found, n, err = 0; + struct ubifs_znode *znode; + + mutex_lock(&c->tnc_mutex); + dbg_tnc("old LEB %d:%d, new LEB %d:%d, len %d, key %s", old_lnum, + old_offs, lnum, offs, len, DBGKEY(key)); + found = lookup_level0_dirty(c, key, &znode, &n); + if (found < 0) { + err = found; + goto out_unlock; + } + + if (found == 1) { + struct ubifs_zbranch *zbr = &znode->zbranch[n]; + + found = 0; + if (zbr->lnum == old_lnum && zbr->offs == old_offs) { + lnc_free(zbr); + err = ubifs_add_dirt(c, zbr->lnum, zbr->len); + if (err) + goto out_unlock; + zbr->lnum = lnum; + zbr->offs = offs; + zbr->len = len; + found = 1; + } else if (is_hash_key(c, key)) { + found = resolve_collision_directly(c, key, &znode, &n, + old_lnum, old_offs); + dbg_tnc("rc returned %d, znode %p, n %d, LEB %d:%d", + found, znode, n, old_lnum, old_offs); + if (found < 0) { + err = found; + goto out_unlock; + } + + if (found) { + /* Ensure the znode is dirtied */ + if (znode->cnext || !ubifs_zn_dirty(znode)) { + znode = dirty_cow_bottom_up(c, + znode); + if (IS_ERR(znode)) { + err = PTR_ERR(znode); + goto out_unlock; + } + } + zbr = &znode->zbranch[n]; + lnc_free(zbr); + err = ubifs_add_dirt(c, zbr->lnum, + zbr->len); + if (err) + goto out_unlock; + zbr->lnum = lnum; + zbr->offs = offs; + zbr->len = len; + } + } + } + + if (!found) + err = ubifs_add_dirt(c, lnum, len); + + if (!err) + err = dbg_check_tnc(c, 0); + +out_unlock: + mutex_unlock(&c->tnc_mutex); + return err; +} + +/** + * ubifs_tnc_add_nm - add a "hashed" node to TNC. + * @c: UBIFS file-system description object + * @key: key to add + * @lnum: LEB number of node + * @offs: node offset + * @len: node length + * @nm: node name + * + * This is the same as 'ubifs_tnc_add()' but it should be used with keys which + * may have collisions, like directory entry keys. + */ +int ubifs_tnc_add_nm(struct ubifs_info *c, const union ubifs_key *key, + int lnum, int offs, int len, const struct qstr *nm) +{ + int found, n, err = 0; + struct ubifs_znode *znode; + + mutex_lock(&c->tnc_mutex); + dbg_tnc("LEB %d:%d, name '%.*s', key %s", lnum, offs, nm->len, nm->name, + DBGKEY(key)); + found = lookup_level0_dirty(c, key, &znode, &n); + if (found < 0) { + err = found; + goto out_unlock; + } + + if (found == 1) { + if (c->replaying) + found = fallible_resolve_collision(c, key, &znode, &n, + nm, 1); + else + found = resolve_collision(c, key, &znode, &n, nm); + dbg_tnc("rc returned %d, znode %p, n %d", found, znode, n); + if (found < 0) { + err = found; + goto out_unlock; + } + + /* Ensure the znode is dirtied */ + if (znode->cnext || !ubifs_zn_dirty(znode)) { + znode = dirty_cow_bottom_up(c, znode); + if (IS_ERR(znode)) { + err = PTR_ERR(znode); + goto out_unlock; + } + } + + if (found == 1) { + struct ubifs_zbranch *zbr = &znode->zbranch[n]; + + lnc_free(zbr); + err = ubifs_add_dirt(c, zbr->lnum, zbr->len); + zbr->lnum = lnum; + zbr->offs = offs; + zbr->len = len; + goto out_unlock; + } + } + + if (!found) { + struct ubifs_zbranch zbr; + + zbr.znode = NULL; + zbr.lnum = lnum; + zbr.offs = offs; + zbr.len = len; + key_copy(c, key, &zbr.key); + err = tnc_insert(c, znode, &zbr, n + 1); + if (err) + goto out_unlock; + if (c->replaying) { + /* + * We did not find it in the index so there may be a + * dangling branch still in the index. So we remove it + * by passing 'ubifs_tnc_remove_nm()' the same key but + * an unmatchable name. + */ + struct qstr noname = { .len = 0, .name = "" }; + + err = dbg_check_tnc(c, 0); + mutex_unlock(&c->tnc_mutex); + if (err) + return err; + return ubifs_tnc_remove_nm(c, key, &noname); + } + } + +out_unlock: + if (!err) + err = dbg_check_tnc(c, 0); + mutex_unlock(&c->tnc_mutex); + return err; +} + +/** + * tnc_delete - delete a znode form TNC. + * @c: UBIFS file-system description object + * @znode: znode to delete from + * @n: zbranch slot number to delete + * + * This function deletes a leaf node from @n-th slot of @znode. Returns zero in + * case of success and a negative error code in case of failure. + */ +static int tnc_delete(struct ubifs_info *c, struct ubifs_znode *znode, int n) +{ + struct ubifs_zbranch *zbr; + struct ubifs_znode *zp; + int i, err; + + /* Delete without merge for now */ + ubifs_assert(znode->level == 0); + ubifs_assert(n >= 0 && n < c->fanout); + dbg_tnc("deleting %s", DBGKEY(&znode->zbranch[n].key)); + + zbr = &znode->zbranch[n]; + lnc_free(zbr); + + err = ubifs_add_dirt(c, zbr->lnum, zbr->len); + if (err) { + dbg_dump_znode(c, znode); + return err; + } + + /* We do not "gap" zbranch slots */ + for (i = n; i < znode->child_cnt - 1; i++) + znode->zbranch[i] = znode->zbranch[i + 1]; + znode->child_cnt -= 1; + + if (znode->child_cnt > 0) + return 0; + + /* + * This was the last zbranch, we have to delete this znode from the + * parent. + */ + + do { + ubifs_assert(!test_bit(OBSOLETE_ZNODE, &znode->flags)); + ubifs_assert(ubifs_zn_dirty(znode)); + + zp = znode->parent; + n = znode->iip; + + atomic_long_dec(&c->dirty_zn_cnt); + + err = insert_old_idx_znode(c, znode); + if (err) + return err; + + if (znode->cnext) { + __set_bit(OBSOLETE_ZNODE, &znode->flags); + atomic_long_inc(&c->clean_zn_cnt); + atomic_long_inc(&ubifs_clean_zn_cnt); + } else + kfree(znode); + znode = zp; + } while (znode->child_cnt == 1); /* while removing last child */ + + /* Remove from znode, entry n - 1 */ + znode->child_cnt -= 1; + ubifs_assert(znode->level != 0); + for (i = n; i < znode->child_cnt; i++) { + znode->zbranch[i] = znode->zbranch[i + 1]; + if (znode->zbranch[i].znode) + znode->zbranch[i].znode->iip = i; + } + + /* + * If this is the root and it has only 1 child then + * collapse the tree. + */ + if (!znode->parent) { + while (znode->child_cnt == 1 && znode->level != 0) { + zp = znode; + zbr = &znode->zbranch[0]; + znode = get_znode(c, znode, 0); + if (IS_ERR(znode)) + return PTR_ERR(znode); + znode = dirty_cow_znode(c, zbr); + if (IS_ERR(znode)) + return PTR_ERR(znode); + znode->parent = NULL; + znode->iip = 0; + if (c->zroot.len) { + err = insert_old_idx(c, c->zroot.lnum, + c->zroot.offs); + if (err) + return err; + } + c->zroot.lnum = zbr->lnum; + c->zroot.offs = zbr->offs; + c->zroot.len = zbr->len; + c->zroot.znode = znode; + ubifs_assert(!test_bit(OBSOLETE_ZNODE, + &zp->flags)); + ubifs_assert(test_bit(DIRTY_ZNODE, &zp->flags)); + atomic_long_dec(&c->dirty_zn_cnt); + + if (zp->cnext) { + __set_bit(OBSOLETE_ZNODE, &zp->flags); + atomic_long_inc(&c->clean_zn_cnt); + atomic_long_inc(&ubifs_clean_zn_cnt); + } else + kfree(zp); + } + } + + return 0; +} + +/** + * ubifs_tnc_remove - remove an index entry of a node. + * @c: UBIFS file-system description object + * @key: key of node + * + * Returns %0 on success or negative error code on failure. + */ +int ubifs_tnc_remove(struct ubifs_info *c, const union ubifs_key *key) +{ + int found, n, err = 0; + struct ubifs_znode *znode; + + mutex_lock(&c->tnc_mutex); + dbg_tnc("key %s", DBGKEY(key)); + found = lookup_level0_dirty(c, key, &znode, &n); + if (found < 0) { + err = found; + goto out_unlock; + } + if (found == 1) + err = tnc_delete(c, znode, n); + if (!err) + err = dbg_check_tnc(c, 0); + +out_unlock: + mutex_unlock(&c->tnc_mutex); + return err; +} + +/** + * ubifs_tnc_remove_nm - remove an index entry for a "hashed" node. + * @c: UBIFS file-system description object + * @key: key of node + * @nm: directory entry name + * + * Returns %0 on success or negative error code on failure. + */ +int ubifs_tnc_remove_nm(struct ubifs_info *c, const union ubifs_key *key, + const struct qstr *nm) +{ + int n, err; + struct ubifs_znode *znode; + + mutex_lock(&c->tnc_mutex); + dbg_tnc("%.*s, key %s", nm->len, nm->name, DBGKEY(key)); + err = lookup_level0_dirty(c, key, &znode, &n); + if (err < 0) + goto out_unlock; + + if (err) { + if (c->replaying) + err = fallible_resolve_collision(c, key, &znode, &n, + nm, 0); + else + err = resolve_collision(c, key, &znode, &n, nm); + dbg_tnc("rc returned %d, znode %p, n %d", err, znode, n); + if (err < 0) + goto out_unlock; + if (err) { + /* Ensure the znode is dirtied */ + if (znode->cnext || !ubifs_zn_dirty(znode)) { + znode = dirty_cow_bottom_up(c, znode); + if (IS_ERR(znode)) { + err = PTR_ERR(znode); + goto out_unlock; + } + } + err = tnc_delete(c, znode, n); + } + } + +out_unlock: + if (!err) + err = dbg_check_tnc(c, 0); + mutex_unlock(&c->tnc_mutex); + return err; +} + +/** + * key_in_range - determine if a key falls within a range of keys. + * @c: UBIFS file-system description object + * @key: key to check + * @from_key: lowest key in range + * @to_key: highest key in range + * + * This function returns %1 if the key is in range and %0 otherwise. + */ +static int key_in_range(struct ubifs_info *c, union ubifs_key *key, + union ubifs_key *from_key, union ubifs_key *to_key) +{ + if (keys_cmp(c, key, from_key) < 0) + return 0; + if (keys_cmp(c, key, to_key) > 0) + return 0; + return 1; +} + +/** + * ubifs_tnc_remove_range - remove index entries in range. + * @c: UBIFS file-system description object + * @from_key: lowest key to remove + * @to_key: highest key to remove + * + * This function removes index entries starting at @from_key and ending at + * @to_key. This function returns zero in case of success and a negative error + * code in case of failure. + */ +int ubifs_tnc_remove_range(struct ubifs_info *c, union ubifs_key *from_key, + union ubifs_key *to_key) +{ + int i, n, k, err = 0; + struct ubifs_znode *znode; + union ubifs_key *key; + + mutex_lock(&c->tnc_mutex); + while (1) { + /* Find first level 0 znode that contains keys to remove */ + err = ubifs_lookup_level0(c, from_key, &znode, &n); + if (err < 0) + goto out_unlock; + + if (err) + key = from_key; + else { + err = tnc_next(c, &znode, &n); + if (err == -ENOENT) { + err = 0; + goto out_unlock; + } + if (err < 0) + goto out_unlock; + key = &znode->zbranch[n].key; + if (!key_in_range(c, key, from_key, to_key)) { + err = 0; + goto out_unlock; + } + } + + /* Ensure the znode is dirtied */ + if (znode->cnext || !ubifs_zn_dirty(znode)) { + znode = dirty_cow_bottom_up(c, znode); + if (IS_ERR(znode)) { + err = PTR_ERR(znode); + goto out_unlock; + } + } + + /* Remove all keys in range except the first */ + for (i = n + 1, k = 0; i < znode->child_cnt; i++, k++) { + key = &znode->zbranch[i].key; + if (!key_in_range(c, key, from_key, to_key)) + break; + lnc_free(&znode->zbranch[i]); + err = ubifs_add_dirt(c, znode->zbranch[i].lnum, + znode->zbranch[i].len); + if (err) { + dbg_dump_znode(c, znode); + goto out_unlock; + } + dbg_tnc("removing %s", DBGKEY(key)); + } + if (k) { + for (i = n + 1 + k; i < znode->child_cnt; i++) + znode->zbranch[i - k] = znode->zbranch[i]; + znode->child_cnt -= k; + } + + /* Now delete the first */ + err = tnc_delete(c, znode, n); + if (err) + goto out_unlock; + } + +out_unlock: + if (!err) + err = dbg_check_tnc(c, 0); + mutex_unlock(&c->tnc_mutex); + return err; +} + +/** + * ubifs_tnc_remove_ino - remove an inode from TNC. + * @c: UBIFS file-system description object + * @inum: inode number to remove + * + * This function remove inode @inum and all the extended attributes associated + * with the anode from TNC and returns zero in case of success or a negative + * error code in case of failure. + */ +int ubifs_tnc_remove_ino(struct ubifs_info *c, ino_t inum) +{ + union ubifs_key key1, key2; + struct ubifs_dent_node *xent, *pxent = NULL; + struct qstr nm = { .name = NULL }; + + dbg_tnc("ino %lu", inum); + + /* + * Walk all extended attribute entries and remove them together with + * corresponding extended attribute inodes. + */ + lowest_xent_key(c, &key1, inum); + while (1) { + ino_t xattr_inum; + int err; + + xent = ubifs_tnc_next_ent(c, &key1, &nm); + if (IS_ERR(xent)) { + err = PTR_ERR(xent); + if (err == -ENOENT) + break; + return err; + } + + xattr_inum = le64_to_cpu(xent->inum); + dbg_tnc("xent '%s', ino %lu", xent->name, xattr_inum); + + nm.name = xent->name; + nm.len = le16_to_cpu(xent->nlen); + err = ubifs_tnc_remove_nm(c, &key1, &nm); + if (err) { + kfree(xent); + return err; + } + + lowest_ino_key(c, &key1, xattr_inum); + highest_ino_key(c, &key2, xattr_inum); + err = ubifs_tnc_remove_range(c, &key1, &key2); + if (err) { + kfree(xent); + return err; + } + + kfree(pxent); + pxent = xent; + key_read(c, &xent->key, &key1); + } + + kfree(pxent); + lowest_ino_key(c, &key1, inum); + highest_ino_key(c, &key2, inum); + + return ubifs_tnc_remove_range(c, &key1, &key2); +} + +/** + * ubifs_tnc_next_ent - walk directory or extended attribute entries. + * @c: UBIFS file-system description object + * @key: key of last entry + * @nm: name of last entry found or %NULL + * + * This function finds and reads the next directory or extended attribute entry + * after the given key (@key) if there is one. @nm is used to resolve + * collisions. + * + * If the name of the current entry is not known and only the key is known, + * @nm->name has to be %NULL. In this case the semantics of this function is a + * little bit different and it returns the entry corresponding to this key, not + * the next one. If the key was not found, the closest "right" entry is + * returned. + * + * If the fist entry has to be found, @key has to contain the lowest possible + * key value for this inode and @name has to be %NULL. + * + * This function returns the found directory or extended attribute entry node + * in case of success, %-ENOENT is returned if no entry was found, and a + * negative error code is returned in case of failure. + */ +struct ubifs_dent_node *ubifs_tnc_next_ent(struct ubifs_info *c, + union ubifs_key *key, + const struct qstr *nm) +{ + int n, err, type = key_type(c, key); + struct ubifs_znode *znode; + struct ubifs_dent_node *dent; + struct ubifs_zbranch *zbr; + union ubifs_key *dkey; + + dbg_tnc("%s %s", nm->name ? (char *)nm->name : "(lowest)", DBGKEY(key)); + ubifs_assert(is_hash_key(c, key)); + + mutex_lock(&c->tnc_mutex); + err = ubifs_lookup_level0(c, key, &znode, &n); + if (unlikely(err < 0)) + goto out_unlock; + + if (nm->name) { + if (err) { + /* Handle collisions */ + err = resolve_collision(c, key, &znode, &n, nm); + dbg_tnc("rc returned %d, znode %p, n %d", + err, znode, n); + if (unlikely(err < 0)) + goto out_unlock; + } + + /* Now find next entry */ + err = tnc_next(c, &znode, &n); + if (unlikely(err)) + goto out_unlock; + } else { + /* + * The full name of the entry was not given, in which case the + * behavior of this function is a little different and it + * returns current entry, not the next one. + */ + if (!err) { + /* + * However, the given key does not exist in the TNC + * tree and @znode/@n variables contain the closest + * "preceding" element. Switch to the next one. + */ + err = tnc_next(c, &znode, &n); + if (err) + goto out_unlock; + } + } + + zbr = &znode->zbranch[n]; + dent = kmalloc(zbr->len, GFP_NOFS); + if (unlikely(!dent)) { + err = -ENOMEM; + goto out_unlock; + } + + /* + * The above 'tnc_next()' call could lead us to the next inode, check + * this. + */ + dkey = &zbr->key; + if (key_inum(c, dkey) != key_inum(c, key) || + key_type(c, dkey) != type) { + err = -ENOENT; + goto out_free; + } + + err = tnc_read_node_nm(c, zbr, dent); + if (unlikely(err)) + goto out_free; + + mutex_unlock(&c->tnc_mutex); + return dent; + +out_free: + kfree(dent); +out_unlock: + mutex_unlock(&c->tnc_mutex); + return ERR_PTR(err); +} + +/** + * tnc_destroy_cnext - destroy left-over obsolete znodes from a failed commit. + * @c: UBIFS file-system description object + * + * Destroy left-over obsolete znodes from a failed commit. + */ +static void tnc_destroy_cnext(struct ubifs_info *c) +{ + struct ubifs_znode *cnext; + + if (!c->cnext) + return; + ubifs_assert(c->cmt_state == COMMIT_BROKEN); + cnext = c->cnext; + do { + struct ubifs_znode *znode = cnext; + + cnext = cnext->cnext; + if (test_bit(OBSOLETE_ZNODE, &znode->flags)) + kfree(znode); + } while (cnext && cnext != c->cnext); +} + +/** + * ubifs_tnc_close - close TNC subsystem and free all related resources. + * @c: UBIFS file-system description object + */ +void ubifs_tnc_close(struct ubifs_info *c) +{ + long clean_freed; + + tnc_destroy_cnext(c); + if (c->zroot.znode) { + clean_freed = ubifs_destroy_tnc_subtree(c->zroot.znode); + atomic_long_sub(clean_freed, &ubifs_clean_zn_cnt); + } + kfree(c->gap_lebs); + kfree(c->ilebs); + destroy_old_idx(c); +} + +/** + * left_znode - get the znode to the left. + * @c: UBIFS file-system description object + * @znode: znode + * + * This function returns a pointer to the znode to the left of @znode or NULL if + * there is not one. A negative error code is returned on failure. + */ +static struct ubifs_znode *left_znode(struct ubifs_info *c, + struct ubifs_znode *znode) +{ + int level = znode->level; + + while (1) { + int n = znode->iip - 1; + + /* Go up until we can go left */ + znode = znode->parent; + if (!znode) + return NULL; + if (n >= 0) { + /* Now go down the rightmost branch to 'level' */ + znode = get_znode(c, znode, n); + if (IS_ERR(znode)) + return znode; + while (znode->level != level) { + n = znode->child_cnt - 1; + znode = get_znode(c, znode, n); + if (IS_ERR(znode)) + return znode; + } + break; + } + } + return znode; +} + +/** + * right_znode - get the znode to the right. + * @c: UBIFS file-system description object + * @znode: znode + * + * This function returns a pointer to the znode to the right of @znode or NULL + * if there is not one. A negative error code is returned on failure. + */ +static struct ubifs_znode *right_znode(struct ubifs_info *c, + struct ubifs_znode *znode) +{ + int level = znode->level; + + while (1) { + int n = znode->iip + 1; + + /* Go up until we can go right */ + znode = znode->parent; + if (!znode) + return NULL; + if (n < znode->child_cnt) { + /* Now go down the leftmost branch to 'level' */ + znode = get_znode(c, znode, n); + if (IS_ERR(znode)) + return znode; + while (znode->level != level) { + znode = get_znode(c, znode, 0); + if (IS_ERR(znode)) + return znode; + } + break; + } + } + return znode; +} + +/** + * lookup_znode - find a particular indexing node from TNC. + * @c: UBIFS file-system description object + * @key: index node key to lookup + * @level: index node level + * @lnum: index node LEB number + * @offs: index node offset + * + * This function searches an indexing node by its first key @key and its + * address @lnum:@offs. It looks up the indexing tree by pulling all indexing + * nodes it traverses to TNC. This function is called fro indexing nodes which + * were found on the media by scanning, for example when garbage-collecting or + * when doing in-the-gaps commit. This means that the indexing node which is + * looked for does not have to have exactly the same leftmost key @key, because + * the leftmost key may have been changed, in which case TNC will contain a + * dirty znode which still refers the same @lnum:@offs. This function is clever + * enough to recognize such indexing nodes. + * + * Note, if a znode was deleted or changed too much, then this function will + * not find it. For situations like this UBIFS has the old index RB-tree + * (indexed by @lnum:@offs). + * + * This function returns a pointer to the znode found or %NULL if it is not + * found. A negative error code is returned on failure. + */ +static struct ubifs_znode *lookup_znode(struct ubifs_info *c, + union ubifs_key *key, int level, + int lnum, int offs) +{ + struct ubifs_znode *znode, *zn; + int n, nn; + + /* + * The arguments have probably been read off flash, so don't assume + * they are valid. + */ + if (level < 0) + return ERR_PTR(-EINVAL); + + /* Get the root znode */ + znode = c->zroot.znode; + if (!znode) { + znode = ubifs_load_znode(c, &c->zroot, NULL, 0); + if (IS_ERR(znode)) + return znode; + } + /* Check if it is the one we are looking for */ + if (c->zroot.lnum == lnum && c->zroot.offs == offs) + return znode; + /* Descend to the parent level i.e. (level + 1) */ + if (level >= znode->level) + return NULL; + while (1) { + ubifs_search_zbranch(c, znode, key, &n); + if (n < 0) { + /* + * We reached a znode where the leftmost key is greater + * than the key we are searching for. This is the same + * situation as the one described in a huge comment at + * the end of the 'ubifs_lookup_level0()' function. And + * for exactly the same reasons we have to try to look + * left before giving up. + */ + znode = left_znode(c, znode); + if (!znode) + return NULL; + if (IS_ERR(znode)) + return znode; + ubifs_search_zbranch(c, znode, key, &n); + ubifs_assert(n >= 0); + } + if (znode->level == level + 1) + break; + znode = get_znode(c, znode, n); + if (IS_ERR(znode)) + return znode; + } + /* Check if the child is the one we are looking for */ + if (znode->zbranch[n].lnum == lnum && znode->zbranch[n].offs == offs) + return get_znode(c, znode, n); + /* If the key is unique, there is nowhere else to look */ + if (!is_hash_key(c, key)) + return NULL; + /* + * The key is not unique and so may be also in the znodes to either + * side. + */ + zn = znode; + nn = n; + /* Look left */ + while (1) { + /* Move one branch to the left */ + if (n) + n -= 1; + else { + znode = left_znode(c, znode); + if (!znode) + break; + if (IS_ERR(znode)) + return znode; + n = znode->child_cnt - 1; + } + /* Check it */ + if (znode->zbranch[n].lnum == lnum && + znode->zbranch[n].offs == offs) + return get_znode(c, znode, n); + /* Stop if the key is less than the one we are looking for */ + if (keys_cmp(c, &znode->zbranch[n].key, key) < 0) + break; + } + /* Back to the middle */ + znode = zn; + n = nn; + /* Look right */ + while (1) { + /* Move one branch to the right */ + if (++n >= znode->child_cnt) { + znode = right_znode(c, znode); + if (!znode) + break; + if (IS_ERR(znode)) + return znode; + n = 0; + } + /* Check it */ + if (znode->zbranch[n].lnum == lnum && + znode->zbranch[n].offs == offs) + return get_znode(c, znode, n); + /* Stop if the key is greater than the one we are looking for */ + if (keys_cmp(c, &znode->zbranch[n].key, key) > 0) + break; + } + return NULL; +} + +/** + * is_idx_node_in_tnc - determine if an index node is in the TNC. + * @c: UBIFS file-system description object + * @key: key of index node + * @level: index node level + * @lnum: LEB number of index node + * @offs: offset of index node + * + * This function returns %0 if the index node is not referred to in the TNC, %1 + * if the index node is referred to in the TNC and the corresponding znode is + * dirty, %2 if an index node is referred to in the TNC and the corresponding + * znode is clean, and a negative error code in case of failure. + * + * Note, the @key argument has to be the key of the first child. Also note, + * this function relies on the fact that 0:0 is never a valid LEB number and + * offset for a main-area node. + */ +int is_idx_node_in_tnc(struct ubifs_info *c, union ubifs_key *key, int level, + int lnum, int offs) +{ + struct ubifs_znode *znode; + + znode = lookup_znode(c, key, level, lnum, offs); + if (!znode) + return 0; + if (IS_ERR(znode)) + return PTR_ERR(znode); + + return ubifs_zn_dirty(znode) ? 1 : 2; +} + +/** + * is_leaf_node_in_tnc - determine if a non-indexing not is in the TNC. + * @c: UBIFS file-system description object + * @key: node key + * @lnum: node LEB number + * @offs: node offset + * + * This function returns %1 if the node is referred to in the TNC, %0 if it is + * not, and a negative error code in case of failure. + * + * Note, this function relies on the fact that 0:0 is never a valid LEB number + * and offset for a main-area node. + */ +static int is_leaf_node_in_tnc(struct ubifs_info *c, union ubifs_key *key, + int lnum, int offs) +{ + struct ubifs_zbranch *zbr; + struct ubifs_znode *znode, *zn; + int n, found, err, nn; + const int unique = !is_hash_key(c, key); + + found = ubifs_lookup_level0(c, key, &znode, &n); + if (found < 0) + return found; /* Error code */ + if (!found) + return 0; + zbr = &znode->zbranch[n]; + if (lnum == zbr->lnum && offs == zbr->offs) + return 1; /* Found it */ + if (unique) + return 0; + /* + * Because the key is not unique, we have to look left + * and right as well + */ + zn = znode; + nn = n; + /* Look left */ + while (1) { + err = tnc_prev(c, &znode, &n); + if (err == -ENOENT) + break; + if (err) + return err; + if (keys_cmp(c, key, &znode->zbranch[n].key)) + break; + zbr = &znode->zbranch[n]; + if (lnum == zbr->lnum && offs == zbr->offs) + return 1; /* Found it */ + } + /* Look right */ + znode = zn; + n = nn; + while (1) { + err = tnc_next(c, &znode, &n); + if (err) { + if (err == -ENOENT) + return 0; + return err; + } + if (keys_cmp(c, key, &znode->zbranch[n].key)) + break; + zbr = &znode->zbranch[n]; + if (lnum == zbr->lnum && offs == zbr->offs) + return 1; /* Found it */ + } + return 0; +} + +/** + * ubifs_tnc_has_node - determine whether a node is in the TNC. + * @c: UBIFS file-system description object + * @key: node key + * @level: index node level (if it is an index node) + * @lnum: node LEB number + * @offs: node offset + * @is_idx: non-zero if the node is an index node + * + * This function returns %1 if the node is in the TNC, %0 if it is not, and a + * negative error code in case of failure. For index nodes, @key has to be the + * key of the first child. An index node is considered to be in the TNC only if + * the corresponding znode is clean or has not been loaded. + */ +int ubifs_tnc_has_node(struct ubifs_info *c, union ubifs_key *key, int level, + int lnum, int offs, int is_idx) +{ + int err; + + mutex_lock(&c->tnc_mutex); + if (is_idx) { + err = is_idx_node_in_tnc(c, key, level, lnum, offs); + if (err < 0) + goto out_unlock; + if (err == 1) + /* The index node was found but it was dirty */ + err = 0; + else if (err == 2) + /* The index node was found and it was clean */ + err = 1; + else + BUG_ON(err != 0); + } else + err = is_leaf_node_in_tnc(c, key, lnum, offs); + +out_unlock: + mutex_unlock(&c->tnc_mutex); + return err; +} + +/** + * ubifs_dirty_idx_node - dirty an index node. + * @c: UBIFS file-system description object + * @key: index node key + * @level: index node level + * @lnum: index node LEB number + * @offs: index node offset + * + * This function loads and dirties an index node so that it can be garbage + * collected. The @key argument has to be the key of the first child. This + * function relies on the fact that 0:0 is never a valid LEB number and offset + * for a main-area node. Returns %0 on success and a negative error code on + * failure. + */ +int ubifs_dirty_idx_node(struct ubifs_info *c, union ubifs_key *key, int level, + int lnum, int offs) +{ + struct ubifs_znode *znode; + int err = 0; + + mutex_lock(&c->tnc_mutex); + znode = lookup_znode(c, key, level, lnum, offs); + if (!znode) + goto out_unlock; + if (IS_ERR(znode)) { + err = PTR_ERR(znode); + goto out_unlock; + } + znode = dirty_cow_bottom_up(c, znode); + if (IS_ERR(znode)) { + err = PTR_ERR(znode); + goto out_unlock; + } + +out_unlock: + mutex_unlock(&c->tnc_mutex); + return err; +} diff --git a/fs/ubifs/tnc_commit.c b/fs/ubifs/tnc_commit.c new file mode 100644 index 000000000000..8117e65ba2e9 --- /dev/null +++ b/fs/ubifs/tnc_commit.c @@ -0,0 +1,1103 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Adrian Hunter + * Artem Bityutskiy (Битюцкий Артём) + */ + +/* This file implements TNC functions for committing */ + +#include "ubifs.h" + +/** + * make_idx_node - make an index node for fill-the-gaps method of TNC commit. + * @c: UBIFS file-system description object + * @idx: buffer in which to place new index node + * @znode: znode from which to make new index node + * @lnum: LEB number where new index node will be written + * @offs: offset where new index node will be written + * @len: length of new index node + */ +static int make_idx_node(struct ubifs_info *c, struct ubifs_idx_node *idx, + struct ubifs_znode *znode, int lnum, int offs, int len) +{ + struct ubifs_znode *zp; + int i, err; + + /* Make index node */ + idx->ch.node_type = UBIFS_IDX_NODE; + idx->child_cnt = cpu_to_le16(znode->child_cnt); + idx->level = cpu_to_le16(znode->level); + for (i = 0; i < znode->child_cnt; i++) { + struct ubifs_branch *br = ubifs_idx_branch(c, idx, i); + struct ubifs_zbranch *zbr = &znode->zbranch[i]; + + key_write_idx(c, &zbr->key, &br->key); + br->lnum = cpu_to_le32(zbr->lnum); + br->offs = cpu_to_le32(zbr->offs); + br->len = cpu_to_le32(zbr->len); + if (!zbr->lnum || !zbr->len) { + ubifs_err("bad ref in znode"); + dbg_dump_znode(c, znode); + if (zbr->znode) + dbg_dump_znode(c, zbr->znode); + } + } + ubifs_prepare_node(c, idx, len, 0); + +#ifdef CONFIG_UBIFS_FS_DEBUG + znode->lnum = lnum; + znode->offs = offs; + znode->len = len; +#endif + + err = insert_old_idx_znode(c, znode); + + /* Update the parent */ + zp = znode->parent; + if (zp) { + struct ubifs_zbranch *zbr; + + zbr = &zp->zbranch[znode->iip]; + zbr->lnum = lnum; + zbr->offs = offs; + zbr->len = len; + } else { + c->zroot.lnum = lnum; + c->zroot.offs = offs; + c->zroot.len = len; + } + c->calc_idx_sz += ALIGN(len, 8); + + atomic_long_dec(&c->dirty_zn_cnt); + + ubifs_assert(ubifs_zn_dirty(znode)); + ubifs_assert(test_bit(COW_ZNODE, &znode->flags)); + + __clear_bit(DIRTY_ZNODE, &znode->flags); + __clear_bit(COW_ZNODE, &znode->flags); + + return err; +} + +/** + * fill_gap - make index nodes in gaps in dirty index LEBs. + * @c: UBIFS file-system description object + * @lnum: LEB number that gap appears in + * @gap_start: offset of start of gap + * @gap_end: offset of end of gap + * @dirt: adds dirty space to this + * + * This function returns the number of index nodes written into the gap. + */ +static int fill_gap(struct ubifs_info *c, int lnum, int gap_start, int gap_end, + int *dirt) +{ + int len, gap_remains, gap_pos, written, pad_len; + + ubifs_assert((gap_start & 7) == 0); + ubifs_assert((gap_end & 7) == 0); + ubifs_assert(gap_end >= gap_start); + + gap_remains = gap_end - gap_start; + if (!gap_remains) + return 0; + gap_pos = gap_start; + written = 0; + while (c->enext) { + len = ubifs_idx_node_sz(c, c->enext->child_cnt); + if (len < gap_remains) { + struct ubifs_znode *znode = c->enext; + const int alen = ALIGN(len, 8); + int err; + + ubifs_assert(alen <= gap_remains); + err = make_idx_node(c, c->ileb_buf + gap_pos, znode, + lnum, gap_pos, len); + if (err) + return err; + gap_remains -= alen; + gap_pos += alen; + c->enext = znode->cnext; + if (c->enext == c->cnext) + c->enext = NULL; + written += 1; + } else + break; + } + if (gap_end == c->leb_size) { + c->ileb_len = ALIGN(gap_pos, c->min_io_size); + /* Pad to end of min_io_size */ + pad_len = c->ileb_len - gap_pos; + } else + /* Pad to end of gap */ + pad_len = gap_remains; + dbg_gc("LEB %d:%d to %d len %d nodes written %d wasted bytes %d", + lnum, gap_start, gap_end, gap_end - gap_start, written, pad_len); + ubifs_pad(c, c->ileb_buf + gap_pos, pad_len); + *dirt += pad_len; + return written; +} + +/** + * find_old_idx - find an index node obsoleted since the last commit start. + * @c: UBIFS file-system description object + * @lnum: LEB number of obsoleted index node + * @offs: offset of obsoleted index node + * + * Returns %1 if found and %0 otherwise. + */ +static int find_old_idx(struct ubifs_info *c, int lnum, int offs) +{ + struct ubifs_old_idx *o; + struct rb_node *p; + + p = c->old_idx.rb_node; + while (p) { + o = rb_entry(p, struct ubifs_old_idx, rb); + if (lnum < o->lnum) + p = p->rb_left; + else if (lnum > o->lnum) + p = p->rb_right; + else if (offs < o->offs) + p = p->rb_left; + else if (offs > o->offs) + p = p->rb_right; + else + return 1; + } + return 0; +} + +/** + * is_idx_node_in_use - determine if an index node can be overwritten. + * @c: UBIFS file-system description object + * @key: key of index node + * @level: index node level + * @lnum: LEB number of index node + * @offs: offset of index node + * + * If @key / @lnum / @offs identify an index node that was not part of the old + * index, then this function returns %0 (obsolete). Else if the index node was + * part of the old index but is now dirty %1 is returned, else if it is clean %2 + * is returned. A negative error code is returned on failure. + */ +static int is_idx_node_in_use(struct ubifs_info *c, union ubifs_key *key, + int level, int lnum, int offs) +{ + int ret; + + ret = is_idx_node_in_tnc(c, key, level, lnum, offs); + if (ret < 0) + return ret; /* Error code */ + if (ret == 0) + if (find_old_idx(c, lnum, offs)) + return 1; + return ret; +} + +/** + * layout_leb_in_gaps - layout index nodes using in-the-gaps method. + * @c: UBIFS file-system description object + * @p: return LEB number here + * + * This function lays out new index nodes for dirty znodes using in-the-gaps + * method of TNC commit. + * This function merely puts the next znode into the next gap, making no attempt + * to try to maximise the number of znodes that fit. + * This function returns the number of index nodes written into the gaps, or a + * negative error code on failure. + */ +static int layout_leb_in_gaps(struct ubifs_info *c, int *p) +{ + struct ubifs_scan_leb *sleb; + struct ubifs_scan_node *snod; + int lnum, dirt = 0, gap_start, gap_end, err, written, tot_written; + + tot_written = 0; + /* Get an index LEB with lots of obsolete index nodes */ + lnum = ubifs_find_dirty_idx_leb(c); + if (lnum < 0) + /* + * There also may be dirt in the index head that could be + * filled, however we do not check there at present. + */ + return lnum; /* Error code */ + *p = lnum; + dbg_gc("LEB %d", lnum); + /* + * Scan the index LEB. We use the generic scan for this even though + * it is more comprehensive and less efficient than is needed for this + * purpose. + */ + sleb = ubifs_scan(c, lnum, 0, c->ileb_buf); + c->ileb_len = 0; + if (IS_ERR(sleb)) + return PTR_ERR(sleb); + gap_start = 0; + list_for_each_entry(snod, &sleb->nodes, list) { + struct ubifs_idx_node *idx; + int in_use, level; + + ubifs_assert(snod->type == UBIFS_IDX_NODE); + idx = snod->node; + key_read(c, ubifs_idx_key(c, idx), &snod->key); + level = le16_to_cpu(idx->level); + /* Determine if the index node is in use (not obsolete) */ + in_use = is_idx_node_in_use(c, &snod->key, level, lnum, + snod->offs); + if (in_use < 0) { + ubifs_scan_destroy(sleb); + return in_use; /* Error code */ + } + if (in_use) { + if (in_use == 1) + dirt += ALIGN(snod->len, 8); + /* + * The obsolete index nodes form gaps that can be + * overwritten. This gap has ended because we have + * found an index node that is still in use + * i.e. not obsolete + */ + gap_end = snod->offs; + /* Try to fill gap */ + written = fill_gap(c, lnum, gap_start, gap_end, &dirt); + if (written < 0) { + ubifs_scan_destroy(sleb); + return written; /* Error code */ + } + tot_written += written; + gap_start = ALIGN(snod->offs + snod->len, 8); + } + } + ubifs_scan_destroy(sleb); + c->ileb_len = c->leb_size; + gap_end = c->leb_size; + /* Try to fill gap */ + written = fill_gap(c, lnum, gap_start, gap_end, &dirt); + if (written < 0) + return written; /* Error code */ + tot_written += written; + if (tot_written == 0) { + struct ubifs_lprops lp; + + dbg_gc("LEB %d wrote %d index nodes", lnum, tot_written); + err = ubifs_read_one_lp(c, lnum, &lp); + if (err) + return err; + if (lp.free == c->leb_size) { + /* + * We must have snatched this LEB from the idx_gc list + * so we need to correct the free and dirty space. + */ + err = ubifs_change_one_lp(c, lnum, + c->leb_size - c->ileb_len, + dirt, 0, 0, 0); + if (err) + return err; + } + return 0; + } + err = ubifs_change_one_lp(c, lnum, c->leb_size - c->ileb_len, dirt, + 0, 0, 0); + if (err) + return err; + err = ubifs_leb_change(c, lnum, c->ileb_buf, c->ileb_len, + UBI_SHORTTERM); + if (err) + return err; + dbg_gc("LEB %d wrote %d index nodes", lnum, tot_written); + return tot_written; +} + +/** + * get_leb_cnt - calculate the number of empty LEBs needed to commit. + * @c: UBIFS file-system description object + * @cnt: number of znodes to commit + * + * This function returns the number of empty LEBs needed to commit @cnt znodes + * to the current index head. The number is not exact and may be more than + * needed. + */ +static int get_leb_cnt(struct ubifs_info *c, int cnt) +{ + int d; + + /* Assume maximum index node size (i.e. overestimate space needed) */ + cnt -= (c->leb_size - c->ihead_offs) / c->max_idx_node_sz; + if (cnt < 0) + cnt = 0; + d = c->leb_size / c->max_idx_node_sz; + return DIV_ROUND_UP(cnt, d); +} + +/** + * layout_in_gaps - in-the-gaps method of committing TNC. + * @c: UBIFS file-system description object + * @cnt: number of dirty znodes to commit. + * + * This function lays out new index nodes for dirty znodes using in-the-gaps + * method of TNC commit. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int layout_in_gaps(struct ubifs_info *c, int cnt) +{ + int err, leb_needed_cnt, written, *p; + + dbg_gc("%d znodes to write", cnt); + + c->gap_lebs = kmalloc(sizeof(int) * (c->lst.idx_lebs + 1), GFP_NOFS); + if (!c->gap_lebs) + return -ENOMEM; + + p = c->gap_lebs; + do { + ubifs_assert(p < c->gap_lebs + sizeof(int) * c->lst.idx_lebs); + written = layout_leb_in_gaps(c, p); + if (written < 0) { + err = written; + if (err == -ENOSPC) { + if (!dbg_force_in_the_gaps_enabled) { + /* + * Do not print scary warnings if the + * debugging option which forces + * in-the-gaps is enabled. + */ + ubifs_err("out of space"); + spin_lock(&c->space_lock); + dbg_dump_budg(c); + spin_unlock(&c->space_lock); + dbg_dump_lprops(c); + } + /* Try to commit anyway */ + err = 0; + break; + } + kfree(c->gap_lebs); + c->gap_lebs = NULL; + return err; + } + p++; + cnt -= written; + leb_needed_cnt = get_leb_cnt(c, cnt); + dbg_gc("%d znodes remaining, need %d LEBs, have %d", cnt, + leb_needed_cnt, c->ileb_cnt); + } while (leb_needed_cnt > c->ileb_cnt); + + *p = -1; + return 0; +} + +/** + * layout_in_empty_space - layout index nodes in empty space. + * @c: UBIFS file-system description object + * + * This function lays out new index nodes for dirty znodes using empty LEBs. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int layout_in_empty_space(struct ubifs_info *c) +{ + struct ubifs_znode *znode, *cnext, *zp; + int lnum, offs, len, next_len, buf_len, buf_offs, used, avail; + int wlen, blen, err; + + cnext = c->enext; + if (!cnext) + return 0; + + lnum = c->ihead_lnum; + buf_offs = c->ihead_offs; + + buf_len = ubifs_idx_node_sz(c, c->fanout); + buf_len = ALIGN(buf_len, c->min_io_size); + used = 0; + avail = buf_len; + + /* Ensure there is enough room for first write */ + next_len = ubifs_idx_node_sz(c, cnext->child_cnt); + if (buf_offs + next_len > c->leb_size) + lnum = -1; + + while (1) { + znode = cnext; + + len = ubifs_idx_node_sz(c, znode->child_cnt); + + /* Determine the index node position */ + if (lnum == -1) { + if (c->ileb_nxt >= c->ileb_cnt) { + ubifs_err("out of space"); + return -ENOSPC; + } + lnum = c->ilebs[c->ileb_nxt++]; + buf_offs = 0; + used = 0; + avail = buf_len; + } + + offs = buf_offs + used; + +#ifdef CONFIG_UBIFS_FS_DEBUG + znode->lnum = lnum; + znode->offs = offs; + znode->len = len; +#endif + + /* Update the parent */ + zp = znode->parent; + if (zp) { + struct ubifs_zbranch *zbr; + int i; + + i = znode->iip; + zbr = &zp->zbranch[i]; + zbr->lnum = lnum; + zbr->offs = offs; + zbr->len = len; + } else { + c->zroot.lnum = lnum; + c->zroot.offs = offs; + c->zroot.len = len; + } + c->calc_idx_sz += ALIGN(len, 8); + + /* + * Once lprops is updated, we can decrease the dirty znode count + * but it is easier to just do it here. + */ + atomic_long_dec(&c->dirty_zn_cnt); + + /* + * Calculate the next index node length to see if there is + * enough room for it + */ + cnext = znode->cnext; + if (cnext == c->cnext) + next_len = 0; + else + next_len = ubifs_idx_node_sz(c, cnext->child_cnt); + + if (c->min_io_size == 1) { + buf_offs += ALIGN(len, 8); + if (next_len) { + if (buf_offs + next_len <= c->leb_size) + continue; + err = ubifs_update_one_lp(c, lnum, 0, + c->leb_size - buf_offs, 0, 0); + if (err) + return err; + lnum = -1; + continue; + } + err = ubifs_update_one_lp(c, lnum, + c->leb_size - buf_offs, 0, 0, 0); + if (err) + return err; + break; + } + + /* Update buffer positions */ + wlen = used + len; + used += ALIGN(len, 8); + avail -= ALIGN(len, 8); + + if (next_len != 0 && + buf_offs + used + next_len <= c->leb_size && + avail > 0) + continue; + + if (avail <= 0 && next_len && + buf_offs + used + next_len <= c->leb_size) + blen = buf_len; + else + blen = ALIGN(wlen, c->min_io_size); + + /* The buffer is full or there are no more znodes to do */ + buf_offs += blen; + if (next_len) { + if (buf_offs + next_len > c->leb_size) { + err = ubifs_update_one_lp(c, lnum, + c->leb_size - buf_offs, blen - used, + 0, 0); + if (err) + return err; + lnum = -1; + } + used -= blen; + if (used < 0) + used = 0; + avail = buf_len - used; + continue; + } + err = ubifs_update_one_lp(c, lnum, c->leb_size - buf_offs, + blen - used, 0, 0); + if (err) + return err; + break; + } + +#ifdef CONFIG_UBIFS_FS_DEBUG + c->new_ihead_lnum = lnum; + c->new_ihead_offs = buf_offs; +#endif + + return 0; +} + +/** + * layout_commit - determine positions of index nodes to commit. + * @c: UBIFS file-system description object + * @no_space: indicates that insufficient empty LEBs were allocated + * @cnt: number of znodes to commit + * + * Calculate and update the positions of index nodes to commit. If there were + * an insufficient number of empty LEBs allocated, then index nodes are placed + * into the gaps created by obsolete index nodes in non-empty index LEBs. For + * this purpose, an obsolete index node is one that was not in the index as at + * the end of the last commit. To write "in-the-gaps" requires that those index + * LEBs are updated atomically in-place. + */ +static int layout_commit(struct ubifs_info *c, int no_space, int cnt) +{ + int err; + + if (no_space) { + err = layout_in_gaps(c, cnt); + if (err) + return err; + } + err = layout_in_empty_space(c); + return err; +} + +/** + * find_first_dirty - find first dirty znode. + * @znode: znode to begin searching from + */ +static struct ubifs_znode *find_first_dirty(struct ubifs_znode *znode) +{ + int i, cont; + + if (!znode) + return NULL; + + while (1) { + if (znode->level == 0) { + if (ubifs_zn_dirty(znode)) + return znode; + return NULL; + } + cont = 0; + for (i = 0; i < znode->child_cnt; i++) { + struct ubifs_zbranch *zbr = &znode->zbranch[i]; + + if (zbr->znode && ubifs_zn_dirty(zbr->znode)) { + znode = zbr->znode; + cont = 1; + break; + } + } + if (!cont) { + if (ubifs_zn_dirty(znode)) + return znode; + return NULL; + } + } +} + +/** + * find_next_dirty - find next dirty znode. + * @znode: znode to begin searching from + */ +static struct ubifs_znode *find_next_dirty(struct ubifs_znode *znode) +{ + int n = znode->iip + 1; + + znode = znode->parent; + if (!znode) + return NULL; + for (; n < znode->child_cnt; n++) { + struct ubifs_zbranch *zbr = &znode->zbranch[n]; + + if (zbr->znode && ubifs_zn_dirty(zbr->znode)) + return find_first_dirty(zbr->znode); + } + return znode; +} + +/** + * get_znodes_to_commit - create list of dirty znodes to commit. + * @c: UBIFS file-system description object + * + * This function returns the number of znodes to commit. + */ +static int get_znodes_to_commit(struct ubifs_info *c) +{ + struct ubifs_znode *znode, *cnext; + int cnt = 0; + + c->cnext = find_first_dirty(c->zroot.znode); + znode = c->enext = c->cnext; + if (!znode) { + dbg_cmt("no znodes to commit"); + return 0; + } + cnt += 1; + while (1) { + ubifs_assert(!test_bit(COW_ZNODE, &znode->flags)); + __set_bit(COW_ZNODE, &znode->flags); + znode->alt = 0; + cnext = find_next_dirty(znode); + if (!cnext) { + znode->cnext = c->cnext; + break; + } + znode->cnext = cnext; + znode = cnext; + cnt += 1; + } + dbg_cmt("committing %d znodes", cnt); + ubifs_assert(cnt == atomic_long_read(&c->dirty_zn_cnt)); + return cnt; +} + +/** + * alloc_idx_lebs - allocate empty LEBs to be used to commit. + * @c: UBIFS file-system description object + * @cnt: number of znodes to commit + * + * This function returns %-ENOSPC if it cannot allocate a sufficient number of + * empty LEBs. %0 is returned on success, otherwise a negative error code + * is returned. + */ +static int alloc_idx_lebs(struct ubifs_info *c, int cnt) +{ + int i, leb_cnt, lnum; + + c->ileb_cnt = 0; + c->ileb_nxt = 0; + leb_cnt = get_leb_cnt(c, cnt); + dbg_cmt("need about %d empty LEBS for TNC commit", leb_cnt); + if (!leb_cnt) + return 0; + c->ilebs = kmalloc(leb_cnt * sizeof(int), GFP_NOFS); + if (!c->ilebs) + return -ENOMEM; + for (i = 0; i < leb_cnt; i++) { + lnum = ubifs_find_free_leb_for_idx(c); + if (lnum < 0) + return lnum; + c->ilebs[c->ileb_cnt++] = lnum; + dbg_cmt("LEB %d", lnum); + } + if (dbg_force_in_the_gaps()) + return -ENOSPC; + return 0; +} + +/** + * free_unused_idx_lebs - free unused LEBs that were allocated for the commit. + * @c: UBIFS file-system description object + * + * It is possible that we allocate more empty LEBs for the commit than we need. + * This functions frees the surplus. + * + * This function returns %0 on success and a negative error code on failure. + */ +static int free_unused_idx_lebs(struct ubifs_info *c) +{ + int i, err = 0, lnum, er; + + for (i = c->ileb_nxt; i < c->ileb_cnt; i++) { + lnum = c->ilebs[i]; + dbg_cmt("LEB %d", lnum); + er = ubifs_change_one_lp(c, lnum, LPROPS_NC, LPROPS_NC, 0, + LPROPS_INDEX | LPROPS_TAKEN, 0); + if (!err) + err = er; + } + return err; +} + +/** + * free_idx_lebs - free unused LEBs after commit end. + * @c: UBIFS file-system description object + * + * This function returns %0 on success and a negative error code on failure. + */ +static int free_idx_lebs(struct ubifs_info *c) +{ + int err; + + err = free_unused_idx_lebs(c); + kfree(c->ilebs); + c->ilebs = NULL; + return err; +} + +/** + * ubifs_tnc_start_commit - start TNC commit. + * @c: UBIFS file-system description object + * @zroot: new index root position is returned here + * + * This function prepares the list of indexing nodes to commit and lays out + * their positions on flash. If there is not enough free space it uses the + * in-gap commit method. Returns zero in case of success and a negative error + * code in case of failure. + */ +int ubifs_tnc_start_commit(struct ubifs_info *c, struct ubifs_zbranch *zroot) +{ + int err = 0, cnt; + + mutex_lock(&c->tnc_mutex); + err = dbg_check_tnc(c, 1); + if (err) + goto out; + cnt = get_znodes_to_commit(c); + if (cnt != 0) { + int no_space = 0; + + err = alloc_idx_lebs(c, cnt); + if (err == -ENOSPC) + no_space = 1; + else if (err) + goto out_free; + err = layout_commit(c, no_space, cnt); + if (err) + goto out_free; + ubifs_assert(atomic_long_read(&c->dirty_zn_cnt) == 0); + err = free_unused_idx_lebs(c); + if (err) + goto out; + } + destroy_old_idx(c); + memcpy(zroot, &c->zroot, sizeof(struct ubifs_zbranch)); + + err = ubifs_save_dirty_idx_lnums(c); + if (err) + goto out; + + spin_lock(&c->space_lock); + /* + * Although we have not finished committing yet, update size of the + * committed index ('c->old_idx_sz') and zero out the index growth + * budget. It is OK to do this now, because we've reserved all the + * space which is needed to commit the index, and it is save for the + * budgeting subsystem to assume the index is already committed, + * even though it is not. + */ + c->old_idx_sz = c->calc_idx_sz; + c->budg_uncommitted_idx = 0; + spin_unlock(&c->space_lock); + mutex_unlock(&c->tnc_mutex); + + dbg_cmt("number of index LEBs %d", c->lst.idx_lebs); + dbg_cmt("size of index %llu", c->calc_idx_sz); + return err; + +out_free: + free_idx_lebs(c); +out: + mutex_unlock(&c->tnc_mutex); + return err; +} + +/** + * write_index - write index nodes. + * @c: UBIFS file-system description object + * + * This function writes the index nodes whose positions were laid out in the + * layout_in_empty_space function. + */ +static int write_index(struct ubifs_info *c) +{ + struct ubifs_idx_node *idx; + struct ubifs_znode *znode, *cnext; + int i, lnum, offs, len, next_len, buf_len, buf_offs, used; + int avail, wlen, err, lnum_pos = 0; + + cnext = c->enext; + if (!cnext) + return 0; + + /* + * Always write index nodes to the index head so that index nodes and + * other types of nodes are never mixed in the same erase block. + */ + lnum = c->ihead_lnum; + buf_offs = c->ihead_offs; + + /* Allocate commit buffer */ + buf_len = ALIGN(c->max_idx_node_sz, c->min_io_size); + used = 0; + avail = buf_len; + + /* Ensure there is enough room for first write */ + next_len = ubifs_idx_node_sz(c, cnext->child_cnt); + if (buf_offs + next_len > c->leb_size) { + err = ubifs_update_one_lp(c, lnum, LPROPS_NC, 0, 0, + LPROPS_TAKEN); + if (err) + return err; + lnum = -1; + } + + while (1) { + cond_resched(); + + znode = cnext; + idx = c->cbuf + used; + + /* Make index node */ + idx->ch.node_type = UBIFS_IDX_NODE; + idx->child_cnt = cpu_to_le16(znode->child_cnt); + idx->level = cpu_to_le16(znode->level); + for (i = 0; i < znode->child_cnt; i++) { + struct ubifs_branch *br = ubifs_idx_branch(c, idx, i); + struct ubifs_zbranch *zbr = &znode->zbranch[i]; + + key_write_idx(c, &zbr->key, &br->key); + br->lnum = cpu_to_le32(zbr->lnum); + br->offs = cpu_to_le32(zbr->offs); + br->len = cpu_to_le32(zbr->len); + if (!zbr->lnum || !zbr->len) { + ubifs_err("bad ref in znode"); + dbg_dump_znode(c, znode); + if (zbr->znode) + dbg_dump_znode(c, zbr->znode); + } + } + len = ubifs_idx_node_sz(c, znode->child_cnt); + ubifs_prepare_node(c, idx, len, 0); + + /* Determine the index node position */ + if (lnum == -1) { + lnum = c->ilebs[lnum_pos++]; + buf_offs = 0; + used = 0; + avail = buf_len; + } + offs = buf_offs + used; + +#ifdef CONFIG_UBIFS_FS_DEBUG + if (lnum != znode->lnum || offs != znode->offs || + len != znode->len) { + ubifs_err("inconsistent znode posn"); + return -EINVAL; + } +#endif + + /* Grab some stuff from znode while we still can */ + cnext = znode->cnext; + + ubifs_assert(ubifs_zn_dirty(znode)); + ubifs_assert(test_bit(COW_ZNODE, &znode->flags)); + + /* + * It is important that other threads should see %DIRTY_ZNODE + * flag cleared before %COW_ZNODE. Specifically, it matters in + * the 'dirty_cow_znode()' function. This is the reason for the + * first barrier. Also, we want the bit changes to be seen to + * other threads ASAP, to avoid unnecesarry copying, which is + * the reason for the second barrier. + */ + clear_bit(DIRTY_ZNODE, &znode->flags); + smp_mb__before_clear_bit(); + clear_bit(COW_ZNODE, &znode->flags); + smp_mb__after_clear_bit(); + + /* Do not access znode from this point on */ + + /* Update buffer positions */ + wlen = used + len; + used += ALIGN(len, 8); + avail -= ALIGN(len, 8); + + /* + * Calculate the next index node length to see if there is + * enough room for it + */ + if (cnext == c->cnext) + next_len = 0; + else + next_len = ubifs_idx_node_sz(c, cnext->child_cnt); + + if (c->min_io_size == 1) { + /* + * Write the prepared index node immediately if there is + * no minimum IO size + */ + err = ubifs_leb_write(c, lnum, c->cbuf, buf_offs, + wlen, UBI_SHORTTERM); + if (err) + return err; + buf_offs += ALIGN(wlen, 8); + if (next_len) { + used = 0; + avail = buf_len; + if (buf_offs + next_len > c->leb_size) { + err = ubifs_update_one_lp(c, lnum, + LPROPS_NC, 0, 0, LPROPS_TAKEN); + if (err) + return err; + lnum = -1; + } + continue; + } + } else { + int blen, nxt_offs = buf_offs + used + next_len; + + if (next_len && nxt_offs <= c->leb_size) { + if (avail > 0) + continue; + else + blen = buf_len; + } else { + wlen = ALIGN(wlen, 8); + blen = ALIGN(wlen, c->min_io_size); + ubifs_pad(c, c->cbuf + wlen, blen - wlen); + } + /* + * The buffer is full or there are no more znodes + * to do + */ + err = ubifs_leb_write(c, lnum, c->cbuf, buf_offs, + blen, UBI_SHORTTERM); + if (err) + return err; + buf_offs += blen; + if (next_len) { + if (nxt_offs > c->leb_size) { + err = ubifs_update_one_lp(c, lnum, + LPROPS_NC, 0, 0, LPROPS_TAKEN); + if (err) + return err; + lnum = -1; + } + used -= blen; + if (used < 0) + used = 0; + avail = buf_len - used; + memmove(c->cbuf, c->cbuf + blen, used); + continue; + } + } + break; + } + +#ifdef CONFIG_UBIFS_FS_DEBUG + if (lnum != c->new_ihead_lnum || buf_offs != c->new_ihead_offs) { + ubifs_err("inconsistent ihead"); + return -EINVAL; + } +#endif + + c->ihead_lnum = lnum; + c->ihead_offs = buf_offs; + + return 0; +} + +/** + * free_obsolete_znodes - free obsolete znodes. + * @c: UBIFS file-system description object + * + * At the end of commit end, obsolete znodes are freed. + */ +static void free_obsolete_znodes(struct ubifs_info *c) +{ + struct ubifs_znode *znode, *cnext; + + cnext = c->cnext; + do { + znode = cnext; + cnext = znode->cnext; + if (test_bit(OBSOLETE_ZNODE, &znode->flags)) + kfree(znode); + else { + znode->cnext = NULL; + atomic_long_inc(&c->clean_zn_cnt); + atomic_long_inc(&ubifs_clean_zn_cnt); + } + } while (cnext != c->cnext); +} + +/** + * return_gap_lebs - return LEBs used by the in-gap commit method. + * @c: UBIFS file-system description object + * + * This function clears the "taken" flag for the LEBs which were used by the + * "commit in-the-gaps" method. + */ +static int return_gap_lebs(struct ubifs_info *c) +{ + int *p, err; + + if (!c->gap_lebs) + return 0; + + dbg_cmt(""); + for (p = c->gap_lebs; *p != -1; p++) { + err = ubifs_change_one_lp(c, *p, LPROPS_NC, LPROPS_NC, 0, + LPROPS_TAKEN, 0); + if (err) + return err; + } + + kfree(c->gap_lebs); + c->gap_lebs = NULL; + return 0; +} + +/** + * ubifs_tnc_end_commit - update the TNC for commit end. + * @c: UBIFS file-system description object + * + * Write the dirty znodes. + */ +int ubifs_tnc_end_commit(struct ubifs_info *c) +{ + int err; + + if (!c->cnext) + return 0; + + err = return_gap_lebs(c); + if (err) + return err; + + err = write_index(c); + if (err) + return err; + + mutex_lock(&c->tnc_mutex); + + dbg_cmt("TNC height is %d", c->zroot.znode->level + 1); + + free_obsolete_znodes(c); + + c->cnext = NULL; + kfree(c->ilebs); + c->ilebs = NULL; + + mutex_unlock(&c->tnc_mutex); + + return 0; +} diff --git a/fs/ubifs/tnc_misc.c b/fs/ubifs/tnc_misc.c new file mode 100644 index 000000000000..a25c1cc1f8d9 --- /dev/null +++ b/fs/ubifs/tnc_misc.c @@ -0,0 +1,494 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Adrian Hunter + * Artem Bityutskiy (Битюцкий Артём) + */ + +/* + * This file contains miscelanious TNC-related functions shared betweend + * different files. This file does not form any logically separate TNC + * sub-system. The file was created because there is a lot of TNC code and + * putting it all in one file would make that file too big and unreadable. + */ + +#include "ubifs.h" + +/** + * ubifs_tnc_levelorder_next - next TNC tree element in levelorder traversal. + * @zr: root of the subtree to traverse + * @znode: previous znode + * + * This function implements levelorder TNC traversal. The LNC is ignored. + * Returns the next element or %NULL if @znode is already the last one. + */ +struct ubifs_znode *ubifs_tnc_levelorder_next(struct ubifs_znode *zr, + struct ubifs_znode *znode) +{ + int level, iip, level_search = 0; + struct ubifs_znode *zn; + + ubifs_assert(zr); + + if (unlikely(!znode)) + return zr; + + if (unlikely(znode == zr)) { + if (znode->level == 0) + return NULL; + return ubifs_tnc_find_child(zr, 0); + } + + level = znode->level; + + iip = znode->iip; + while (1) { + ubifs_assert(znode->level <= zr->level); + + /* + * First walk up until there is a znode with next branch to + * look at. + */ + while (znode->parent != zr && iip >= znode->parent->child_cnt) { + znode = znode->parent; + iip = znode->iip; + } + + if (unlikely(znode->parent == zr && + iip >= znode->parent->child_cnt)) { + /* This level is done, switch to the lower one */ + level -= 1; + if (level_search || level < 0) + /* + * We were already looking for znode at lower + * level ('level_search'). As we are here + * again, it just does not exist. Or all levels + * were finished ('level < 0'). + */ + return NULL; + + level_search = 1; + iip = -1; + znode = ubifs_tnc_find_child(zr, 0); + ubifs_assert(znode); + } + + /* Switch to the next index */ + zn = ubifs_tnc_find_child(znode->parent, iip + 1); + if (!zn) { + /* No more children to look at, we have walk up */ + iip = znode->parent->child_cnt; + continue; + } + + /* Walk back down to the level we came from ('level') */ + while (zn->level != level) { + znode = zn; + zn = ubifs_tnc_find_child(zn, 0); + if (!zn) { + /* + * This path is not too deep so it does not + * reach 'level'. Try next path. + */ + iip = znode->iip; + break; + } + } + + if (zn) { + ubifs_assert(zn->level >= 0); + return zn; + } + } +} + +/** + * ubifs_search_zbranch - search znode branch. + * @c: UBIFS file-system description object + * @znode: znode to search in + * @key: key to search for + * @n: znode branch slot number is returned here + * + * This is a helper function which search branch with key @key in @znode using + * binary search. The result of the search may be: + * o exact match, then %1 is returned, and the slot number of the branch is + * stored in @n; + * o no exact match, then %0 is returned and the slot number of the left + * closest branch is returned in @n; the slot if all keys in this znode are + * greater than @key, then %-1 is returned in @n. + */ +int ubifs_search_zbranch(const struct ubifs_info *c, + const struct ubifs_znode *znode, + const union ubifs_key *key, int *n) +{ + int beg = 0, end = znode->child_cnt, uninitialized_var(mid); + int uninitialized_var(cmp); + const struct ubifs_zbranch *zbr = &znode->zbranch[0]; + + ubifs_assert(end > beg); + + while (end > beg) { + mid = (beg + end) >> 1; + cmp = keys_cmp(c, key, &zbr[mid].key); + if (cmp > 0) + beg = mid + 1; + else if (cmp < 0) + end = mid; + else { + *n = mid; + return 1; + } + } + + *n = end - 1; + + /* The insert point is after *n */ + ubifs_assert(*n >= -1 && *n < znode->child_cnt); + if (*n == -1) + ubifs_assert(keys_cmp(c, key, &zbr[0].key) < 0); + else + ubifs_assert(keys_cmp(c, key, &zbr[*n].key) > 0); + if (*n + 1 < znode->child_cnt) + ubifs_assert(keys_cmp(c, key, &zbr[*n + 1].key) < 0); + + return 0; +} + +/** + * ubifs_tnc_postorder_first - find first znode to do postorder tree traversal. + * @znode: znode to start at (root of the sub-tree to traverse) + * + * Find the lowest leftmost znode in a subtree of the TNC tree. The LNC is + * ignored. + */ +struct ubifs_znode *ubifs_tnc_postorder_first(struct ubifs_znode *znode) +{ + if (unlikely(!znode)) + return NULL; + + while (znode->level > 0) { + struct ubifs_znode *child; + + child = ubifs_tnc_find_child(znode, 0); + if (!child) + return znode; + znode = child; + } + + return znode; +} + +/** + * ubifs_tnc_postorder_next - next TNC tree element in postorder traversal. + * @znode: previous znode + * + * This function implements postorder TNC traversal. The LNC is ignored. + * Returns the next element or %NULL if @znode is already the last one. + */ +struct ubifs_znode *ubifs_tnc_postorder_next(struct ubifs_znode *znode) +{ + struct ubifs_znode *zn; + + ubifs_assert(znode); + if (unlikely(!znode->parent)) + return NULL; + + /* Switch to the next index in the parent */ + zn = ubifs_tnc_find_child(znode->parent, znode->iip + 1); + if (!zn) + /* This is in fact the last child, return parent */ + return znode->parent; + + /* Go to the first znode in this new subtree */ + return ubifs_tnc_postorder_first(zn); +} + +/** + * ubifs_destroy_tnc_subtree - destroy all znodes connected to a subtree. + * @znode: znode defining subtree to destroy + * + * This function destroys subtree of the TNC tree. Returns number of clean + * znodes in the subtree. + */ +long ubifs_destroy_tnc_subtree(struct ubifs_znode *znode) +{ + struct ubifs_znode *zn = ubifs_tnc_postorder_first(znode); + long clean_freed = 0; + int n; + + ubifs_assert(zn); + while (1) { + for (n = 0; n < zn->child_cnt; n++) { + if (!zn->zbranch[n].znode) + continue; + + if (zn->level > 0 && + !ubifs_zn_dirty(zn->zbranch[n].znode)) + clean_freed += 1; + + cond_resched(); + kfree(zn->zbranch[n].znode); + } + + if (zn == znode) { + if (!ubifs_zn_dirty(zn)) + clean_freed += 1; + kfree(zn); + return clean_freed; + } + + zn = ubifs_tnc_postorder_next(zn); + } +} + +/** + * read_znode - read an indexing node from flash and fill znode. + * @c: UBIFS file-system description object + * @lnum: LEB of the indexing node to read + * @offs: node offset + * @len: node length + * @znode: znode to read to + * + * This function reads an indexing node from the flash media and fills znode + * with the read data. Returns zero in case of success and a negative error + * code in case of failure. The read indexing node is validated and if anything + * is wrong with it, this function prints complaint messages and returns + * %-EINVAL. + */ +static int read_znode(struct ubifs_info *c, int lnum, int offs, int len, + struct ubifs_znode *znode) +{ + int i, err, type, cmp; + struct ubifs_idx_node *idx; + + idx = kmalloc(c->max_idx_node_sz, GFP_NOFS); + if (!idx) + return -ENOMEM; + + err = ubifs_read_node(c, idx, UBIFS_IDX_NODE, len, lnum, offs); + if (err < 0) { + kfree(idx); + return err; + } + + znode->child_cnt = le16_to_cpu(idx->child_cnt); + znode->level = le16_to_cpu(idx->level); + + dbg_tnc("LEB %d:%d, level %d, %d branch", + lnum, offs, znode->level, znode->child_cnt); + + if (znode->child_cnt > c->fanout || znode->level > UBIFS_MAX_LEVELS) { + dbg_err("current fanout %d, branch count %d", + c->fanout, znode->child_cnt); + dbg_err("max levels %d, znode level %d", + UBIFS_MAX_LEVELS, znode->level); + err = 1; + goto out_dump; + } + + for (i = 0; i < znode->child_cnt; i++) { + const struct ubifs_branch *br = ubifs_idx_branch(c, idx, i); + struct ubifs_zbranch *zbr = &znode->zbranch[i]; + + key_read(c, &br->key, &zbr->key); + zbr->lnum = le32_to_cpu(br->lnum); + zbr->offs = le32_to_cpu(br->offs); + zbr->len = le32_to_cpu(br->len); + zbr->znode = NULL; + + /* Validate branch */ + + if (zbr->lnum < c->main_first || + zbr->lnum >= c->leb_cnt || zbr->offs < 0 || + zbr->offs + zbr->len > c->leb_size || zbr->offs & 7) { + dbg_err("bad branch %d", i); + err = 2; + goto out_dump; + } + + switch (key_type(c, &zbr->key)) { + case UBIFS_INO_KEY: + case UBIFS_DATA_KEY: + case UBIFS_DENT_KEY: + case UBIFS_XENT_KEY: + break; + default: + dbg_msg("bad key type at slot %d: %s", i, + DBGKEY(&zbr->key)); + err = 3; + goto out_dump; + } + + if (znode->level) + continue; + + type = key_type(c, &zbr->key); + if (c->ranges[type].max_len == 0) { + if (zbr->len != c->ranges[type].len) { + dbg_err("bad target node (type %d) length (%d)", + type, zbr->len); + dbg_err("have to be %d", c->ranges[type].len); + err = 4; + goto out_dump; + } + } else if (zbr->len < c->ranges[type].min_len || + zbr->len > c->ranges[type].max_len) { + dbg_err("bad target node (type %d) length (%d)", + type, zbr->len); + dbg_err("have to be in range of %d-%d", + c->ranges[type].min_len, + c->ranges[type].max_len); + err = 5; + goto out_dump; + } + } + + /* + * Ensure that the next key is greater or equivalent to the + * previous one. + */ + for (i = 0; i < znode->child_cnt - 1; i++) { + const union ubifs_key *key1, *key2; + + key1 = &znode->zbranch[i].key; + key2 = &znode->zbranch[i + 1].key; + + cmp = keys_cmp(c, key1, key2); + if (cmp > 0) { + dbg_err("bad key order (keys %d and %d)", i, i + 1); + err = 6; + goto out_dump; + } else if (cmp == 0 && !is_hash_key(c, key1)) { + /* These can only be keys with colliding hash */ + dbg_err("keys %d and %d are not hashed but equivalent", + i, i + 1); + err = 7; + goto out_dump; + } + } + + kfree(idx); + return 0; + +out_dump: + ubifs_err("bad indexing node at LEB %d:%d, error %d", lnum, offs, err); + dbg_dump_node(c, idx); + kfree(idx); + return -EINVAL; +} + +/** + * ubifs_load_znode - load znode to TNC cache. + * @c: UBIFS file-system description object + * @zbr: znode branch + * @parent: znode's parent + * @iip: index in parent + * + * This function loads znode pointed to by @zbr into the TNC cache and + * returns pointer to it in case of success and a negative error code in case + * of failure. + */ +struct ubifs_znode *ubifs_load_znode(struct ubifs_info *c, + struct ubifs_zbranch *zbr, + struct ubifs_znode *parent, int iip) +{ + int err; + struct ubifs_znode *znode; + + ubifs_assert(!zbr->znode); + /* + * A slab cache is not presently used for znodes because the znode size + * depends on the fanout which is stored in the superblock. + */ + znode = kzalloc(c->max_znode_sz, GFP_NOFS); + if (!znode) + return ERR_PTR(-ENOMEM); + + err = read_znode(c, zbr->lnum, zbr->offs, zbr->len, znode); + if (err) + goto out; + + atomic_long_inc(&c->clean_zn_cnt); + + /* + * Increment the global clean znode counter as well. It is OK that + * global and per-FS clean znode counters may be inconsistent for some + * short time (because we might be preempted at this point), the global + * one is only used in shrinker. + */ + atomic_long_inc(&ubifs_clean_zn_cnt); + + zbr->znode = znode; + znode->parent = parent; + znode->time = get_seconds(); + znode->iip = iip; + + return znode; + +out: + kfree(znode); + return ERR_PTR(err); +} + +/** + * ubifs_tnc_read_node - read a leaf node from the flash media. + * @c: UBIFS file-system description object + * @zbr: key and position of the node + * @node: node is returned here + * + * This function reads a node defined by @zbr from the flash media. Returns + * zero in case of success or a negative negative error code in case of + * failure. + */ +int ubifs_tnc_read_node(struct ubifs_info *c, struct ubifs_zbranch *zbr, + void *node) +{ + union ubifs_key key1, *key = &zbr->key; + int err, type = key_type(c, key); + struct ubifs_wbuf *wbuf; + + /* + * 'zbr' has to point to on-flash node. The node may sit in a bud and + * may even be in a write buffer, so we have to take care about this. + */ + wbuf = ubifs_get_wbuf(c, zbr->lnum); + if (wbuf) + err = ubifs_read_node_wbuf(wbuf, node, type, zbr->len, + zbr->lnum, zbr->offs); + else + err = ubifs_read_node(c, node, type, zbr->len, zbr->lnum, + zbr->offs); + + if (err) { + dbg_tnc("key %s", DBGKEY(key)); + return err; + } + + /* Make sure the key of the read node is correct */ + key_read(c, key, &key1); + if (memcmp(node + UBIFS_KEY_OFFSET, &key1, c->key_len)) { + ubifs_err("bad key in node at LEB %d:%d", + zbr->lnum, zbr->offs); + dbg_tnc("looked for key %s found node's key %s", + DBGKEY(key), DBGKEY1(&key1)); + dbg_dump_node(c, node); + return -EINVAL; + } + + return 0; +} diff --git a/fs/ubifs/ubifs-media.h b/fs/ubifs/ubifs-media.h new file mode 100644 index 000000000000..0cc7da9bed47 --- /dev/null +++ b/fs/ubifs/ubifs-media.h @@ -0,0 +1,745 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* + * This file describes UBIFS on-flash format and contains definitions of all the + * relevant data structures and constants. + * + * All UBIFS on-flash objects are stored in the form of nodes. All nodes start + * with the UBIFS node magic number and have the same common header. Nodes + * always sit at 8-byte aligned positions on the media and node header sizes are + * also 8-byte aligned (except for the indexing node and the padding node). + */ + +#ifndef __UBIFS_MEDIA_H__ +#define __UBIFS_MEDIA_H__ + +/* UBIFS node magic number (must not have the padding byte first or last) */ +#define UBIFS_NODE_MAGIC 0x06101831 + +/* UBIFS on-flash format version */ +#define UBIFS_FORMAT_VERSION 4 + +/* Minimum logical eraseblock size in bytes */ +#define UBIFS_MIN_LEB_SZ (15*1024) + +/* Initial CRC32 value used when calculating CRC checksums */ +#define UBIFS_CRC32_INIT 0xFFFFFFFFU + +/* + * UBIFS does not try to compress data if its length is less than the below + * constant. + */ +#define UBIFS_MIN_COMPR_LEN 128 + +/* Root inode number */ +#define UBIFS_ROOT_INO 1 + +/* Lowest inode number used for regular inodes (not UBIFS-only internal ones) */ +#define UBIFS_FIRST_INO 64 + +/* + * Maximum file name and extended attribute length (must be a multiple of 8, + * minus 1). + */ +#define UBIFS_MAX_NLEN 255 + +/* Maximum number of data journal heads */ +#define UBIFS_MAX_JHEADS 1 + +/* + * Size of UBIFS data block. Note, UBIFS is not a block oriented file-system, + * which means that it does not treat the underlying media as consisting of + * blocks like in case of hard drives. Do not be confused. UBIFS block is just + * the maximum amount of data which one data node can have or which can be + * attached to an inode node. + */ +#define UBIFS_BLOCK_SIZE 4096 +#define UBIFS_BLOCK_SHIFT 12 +#define UBIFS_BLOCK_MASK 0x00000FFF + +/* UBIFS padding byte pattern (must not be first or last byte of node magic) */ +#define UBIFS_PADDING_BYTE 0xCE + +/* Maximum possible key length */ +#define UBIFS_MAX_KEY_LEN 16 + +/* Key length ("simple" format) */ +#define UBIFS_SK_LEN 8 + +/* Minimum index tree fanout */ +#define UBIFS_MIN_FANOUT 2 + +/* Maximum number of levels in UBIFS indexing B-tree */ +#define UBIFS_MAX_LEVELS 512 + +/* Maximum amount of data attached to an inode in bytes */ +#define UBIFS_MAX_INO_DATA UBIFS_BLOCK_SIZE + +/* LEB Properties Tree fanout (must be power of 2) and fanout shift */ +#define UBIFS_LPT_FANOUT 4 +#define UBIFS_LPT_FANOUT_SHIFT 2 + +/* LEB Properties Tree bit field sizes */ +#define UBIFS_LPT_CRC_BITS 16 +#define UBIFS_LPT_CRC_BYTES 2 +#define UBIFS_LPT_TYPE_BITS 4 + +/* The key is always at the same position in all keyed nodes */ +#define UBIFS_KEY_OFFSET offsetof(struct ubifs_ino_node, key) + +/* + * LEB Properties Tree node types. + * + * UBIFS_LPT_PNODE: LPT leaf node (contains LEB properties) + * UBIFS_LPT_NNODE: LPT internal node + * UBIFS_LPT_LTAB: LPT's own lprops table + * UBIFS_LPT_LSAVE: LPT's save table (big model only) + * UBIFS_LPT_NODE_CNT: count of LPT node types + * UBIFS_LPT_NOT_A_NODE: all ones (15 for 4 bits) is never a valid node type + */ +enum { + UBIFS_LPT_PNODE, + UBIFS_LPT_NNODE, + UBIFS_LPT_LTAB, + UBIFS_LPT_LSAVE, + UBIFS_LPT_NODE_CNT, + UBIFS_LPT_NOT_A_NODE = (1 << UBIFS_LPT_TYPE_BITS) - 1, +}; + +/* + * UBIFS inode types. + * + * UBIFS_ITYPE_REG: regular file + * UBIFS_ITYPE_DIR: directory + * UBIFS_ITYPE_LNK: soft link + * UBIFS_ITYPE_BLK: block device node + * UBIFS_ITYPE_CHR: character device node + * UBIFS_ITYPE_FIFO: fifo + * UBIFS_ITYPE_SOCK: socket + * UBIFS_ITYPES_CNT: count of supported file types + */ +enum { + UBIFS_ITYPE_REG, + UBIFS_ITYPE_DIR, + UBIFS_ITYPE_LNK, + UBIFS_ITYPE_BLK, + UBIFS_ITYPE_CHR, + UBIFS_ITYPE_FIFO, + UBIFS_ITYPE_SOCK, + UBIFS_ITYPES_CNT, +}; + +/* + * Supported key hash functions. + * + * UBIFS_KEY_HASH_R5: R5 hash + * UBIFS_KEY_HASH_TEST: test hash which just returns first 4 bytes of the name + */ +enum { + UBIFS_KEY_HASH_R5, + UBIFS_KEY_HASH_TEST, +}; + +/* + * Supported key formats. + * + * UBIFS_SIMPLE_KEY_FMT: simple key format + */ +enum { + UBIFS_SIMPLE_KEY_FMT, +}; + +/* + * The simple key format uses 29 bits for storing UBIFS block number and hash + * value. + */ +#define UBIFS_S_KEY_BLOCK_BITS 29 +#define UBIFS_S_KEY_BLOCK_MASK 0x1FFFFFFF +#define UBIFS_S_KEY_HASH_BITS UBIFS_S_KEY_BLOCK_BITS +#define UBIFS_S_KEY_HASH_MASK UBIFS_S_KEY_BLOCK_MASK + +/* + * Key types. + * + * UBIFS_INO_KEY: inode node key + * UBIFS_DATA_KEY: data node key + * UBIFS_DENT_KEY: directory entry node key + * UBIFS_XENT_KEY: extended attribute entry key + * UBIFS_KEY_TYPES_CNT: number of supported key types + */ +enum { + UBIFS_INO_KEY, + UBIFS_DATA_KEY, + UBIFS_DENT_KEY, + UBIFS_XENT_KEY, + UBIFS_KEY_TYPES_CNT, +}; + +/* Count of LEBs reserved for the superblock area */ +#define UBIFS_SB_LEBS 1 +/* Count of LEBs reserved for the master area */ +#define UBIFS_MST_LEBS 2 + +/* First LEB of the superblock area */ +#define UBIFS_SB_LNUM 0 +/* First LEB of the master area */ +#define UBIFS_MST_LNUM (UBIFS_SB_LNUM + UBIFS_SB_LEBS) +/* First LEB of the log area */ +#define UBIFS_LOG_LNUM (UBIFS_MST_LNUM + UBIFS_MST_LEBS) + +/* + * The below constants define the absolute minimum values for various UBIFS + * media areas. Many of them actually depend of flash geometry and the FS + * configuration (number of journal heads, orphan LEBs, etc). This means that + * the smallest volume size which can be used for UBIFS cannot be pre-defined + * by these constants. The file-system that meets the below limitation will not + * necessarily mount. UBIFS does run-time calculations and validates the FS + * size. + */ + +/* Minimum number of logical eraseblocks in the log */ +#define UBIFS_MIN_LOG_LEBS 2 +/* Minimum number of bud logical eraseblocks (one for each head) */ +#define UBIFS_MIN_BUD_LEBS 3 +/* Minimum number of journal logical eraseblocks */ +#define UBIFS_MIN_JNL_LEBS (UBIFS_MIN_LOG_LEBS + UBIFS_MIN_BUD_LEBS) +/* Minimum number of LPT area logical eraseblocks */ +#define UBIFS_MIN_LPT_LEBS 2 +/* Minimum number of orphan area logical eraseblocks */ +#define UBIFS_MIN_ORPH_LEBS 1 +/* + * Minimum number of main area logical eraseblocks (buds, 2 for the index, 1 + * for GC, 1 for deletions, and at least 1 for committed data). + */ +#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 5) + +/* Minimum number of logical eraseblocks */ +#define UBIFS_MIN_LEB_CNT (UBIFS_SB_LEBS + UBIFS_MST_LEBS + \ + UBIFS_MIN_LOG_LEBS + UBIFS_MIN_LPT_LEBS + \ + UBIFS_MIN_ORPH_LEBS + UBIFS_MIN_MAIN_LEBS) + +/* Node sizes (N.B. these are guaranteed to be multiples of 8) */ +#define UBIFS_CH_SZ sizeof(struct ubifs_ch) +#define UBIFS_INO_NODE_SZ sizeof(struct ubifs_ino_node) +#define UBIFS_DATA_NODE_SZ sizeof(struct ubifs_data_node) +#define UBIFS_DENT_NODE_SZ sizeof(struct ubifs_dent_node) +#define UBIFS_TRUN_NODE_SZ sizeof(struct ubifs_trun_node) +#define UBIFS_PAD_NODE_SZ sizeof(struct ubifs_pad_node) +#define UBIFS_SB_NODE_SZ sizeof(struct ubifs_sb_node) +#define UBIFS_MST_NODE_SZ sizeof(struct ubifs_mst_node) +#define UBIFS_REF_NODE_SZ sizeof(struct ubifs_ref_node) +#define UBIFS_IDX_NODE_SZ sizeof(struct ubifs_idx_node) +#define UBIFS_CS_NODE_SZ sizeof(struct ubifs_cs_node) +#define UBIFS_ORPH_NODE_SZ sizeof(struct ubifs_orph_node) +/* Extended attribute entry nodes are identical to directory entry nodes */ +#define UBIFS_XENT_NODE_SZ UBIFS_DENT_NODE_SZ +/* Only this does not have to be multiple of 8 bytes */ +#define UBIFS_BRANCH_SZ sizeof(struct ubifs_branch) + +/* Maximum node sizes (N.B. these are guaranteed to be multiples of 8) */ +#define UBIFS_MAX_DATA_NODE_SZ (UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE) +#define UBIFS_MAX_INO_NODE_SZ (UBIFS_INO_NODE_SZ + UBIFS_MAX_INO_DATA) +#define UBIFS_MAX_DENT_NODE_SZ (UBIFS_DENT_NODE_SZ + UBIFS_MAX_NLEN + 1) +#define UBIFS_MAX_XENT_NODE_SZ UBIFS_MAX_DENT_NODE_SZ + +/* The largest UBIFS node */ +#define UBIFS_MAX_NODE_SZ UBIFS_MAX_INO_NODE_SZ + +/* + * On-flash inode flags. + * + * UBIFS_COMPR_FL: use compression for this inode + * UBIFS_SYNC_FL: I/O on this inode has to be synchronous + * UBIFS_IMMUTABLE_FL: inode is immutable + * UBIFS_APPEND_FL: writes to the inode may only append data + * UBIFS_DIRSYNC_FL: I/O on this directory inode has to be synchronous + * UBIFS_XATTR_FL: this inode is the inode for an extended attribute value + * + * Note, these are on-flash flags which correspond to ioctl flags + * (@FS_COMPR_FL, etc). They have the same values now, but generally, do not + * have to be the same. + */ +enum { + UBIFS_COMPR_FL = 0x01, + UBIFS_SYNC_FL = 0x02, + UBIFS_IMMUTABLE_FL = 0x04, + UBIFS_APPEND_FL = 0x08, + UBIFS_DIRSYNC_FL = 0x10, + UBIFS_XATTR_FL = 0x20, +}; + +/* Inode flag bits used by UBIFS */ +#define UBIFS_FL_MASK 0x0000001F + +/* + * UBIFS compression algorithms. + * + * UBIFS_COMPR_NONE: no compression + * UBIFS_COMPR_LZO: LZO compression + * UBIFS_COMPR_ZLIB: ZLIB compression + * UBIFS_COMPR_TYPES_CNT: count of supported compression types + */ +enum { + UBIFS_COMPR_NONE, + UBIFS_COMPR_LZO, + UBIFS_COMPR_ZLIB, + UBIFS_COMPR_TYPES_CNT, +}; + +/* + * UBIFS node types. + * + * UBIFS_INO_NODE: inode node + * UBIFS_DATA_NODE: data node + * UBIFS_DENT_NODE: directory entry node + * UBIFS_XENT_NODE: extended attribute node + * UBIFS_TRUN_NODE: truncation node + * UBIFS_PAD_NODE: padding node + * UBIFS_SB_NODE: superblock node + * UBIFS_MST_NODE: master node + * UBIFS_REF_NODE: LEB reference node + * UBIFS_IDX_NODE: index node + * UBIFS_CS_NODE: commit start node + * UBIFS_ORPH_NODE: orphan node + * UBIFS_NODE_TYPES_CNT: count of supported node types + * + * Note, we index arrays by these numbers, so keep them low and contiguous. + * Node type constants for inodes, direntries and so on have to be the same as + * corresponding key type constants. + */ +enum { + UBIFS_INO_NODE, + UBIFS_DATA_NODE, + UBIFS_DENT_NODE, + UBIFS_XENT_NODE, + UBIFS_TRUN_NODE, + UBIFS_PAD_NODE, + UBIFS_SB_NODE, + UBIFS_MST_NODE, + UBIFS_REF_NODE, + UBIFS_IDX_NODE, + UBIFS_CS_NODE, + UBIFS_ORPH_NODE, + UBIFS_NODE_TYPES_CNT, +}; + +/* + * Master node flags. + * + * UBIFS_MST_DIRTY: rebooted uncleanly - master node is dirty + * UBIFS_MST_NO_ORPHS: no orphan inodes present + * UBIFS_MST_RCVRY: written by recovery + */ +enum { + UBIFS_MST_DIRTY = 1, + UBIFS_MST_NO_ORPHS = 2, + UBIFS_MST_RCVRY = 4, +}; + +/* + * Node group type (used by recovery to recover whole group or none). + * + * UBIFS_NO_NODE_GROUP: this node is not part of a group + * UBIFS_IN_NODE_GROUP: this node is a part of a group + * UBIFS_LAST_OF_NODE_GROUP: this node is the last in a group + */ +enum { + UBIFS_NO_NODE_GROUP = 0, + UBIFS_IN_NODE_GROUP, + UBIFS_LAST_OF_NODE_GROUP, +}; + +/* + * Superblock flags. + * + * UBIFS_FLG_BIGLPT: if "big" LPT model is used if set + */ +enum { + UBIFS_FLG_BIGLPT = 0x02, +}; + +/** + * struct ubifs_ch - common header node. + * @magic: UBIFS node magic number (%UBIFS_NODE_MAGIC) + * @crc: CRC-32 checksum of the node header + * @sqnum: sequence number + * @len: full node length + * @node_type: node type + * @group_type: node group type + * @padding: reserved for future, zeroes + * + * Every UBIFS node starts with this common part. If the node has a key, the + * key always goes next. + */ +struct ubifs_ch { + __le32 magic; + __le32 crc; + __le64 sqnum; + __le32 len; + __u8 node_type; + __u8 group_type; + __u8 padding[2]; +} __attribute__ ((packed)); + +/** + * union ubifs_dev_desc - device node descriptor. + * @new: new type device descriptor + * @huge: huge type device descriptor + * + * This data structure describes major/minor numbers of a device node. In an + * inode is a device node then its data contains an object of this type. UBIFS + * uses standard Linux "new" and "huge" device node encodings. + */ +union ubifs_dev_desc { + __le32 new; + __le64 huge; +} __attribute__ ((packed)); + +/** + * struct ubifs_ino_node - inode node. + * @ch: common header + * @key: node key + * @creat_sqnum: sequence number at time of creation + * @size: inode size in bytes (amount of uncompressed data) + * @atime_sec: access time seconds + * @ctime_sec: creation time seconds + * @mtime_sec: modification time seconds + * @atime_nsec: access time nanoseconds + * @ctime_nsec: creation time nanoseconds + * @mtime_nsec: modification time nanoseconds + * @nlink: number of hard links + * @uid: owner ID + * @gid: group ID + * @mode: access flags + * @flags: per-inode flags (%UBIFS_COMPR_FL, %UBIFS_SYNC_FL, etc) + * @data_len: inode data length + * @xattr_cnt: count of extended attributes this inode has + * @xattr_size: summarized size of all extended attributes in bytes + * @padding1: reserved for future, zeroes + * @xattr_names: sum of lengths of all extended attribute names belonging to + * this inode + * @compr_type: compression type used for this inode + * @padding2: reserved for future, zeroes + * @data: data attached to the inode + * + * Note, even though inode compression type is defined by @compr_type, some + * nodes of this inode may be compressed with different compressor - this + * happens if compression type is changed while the inode already has data + * nodes. But @compr_type will be use for further writes to the inode. + * + * Note, do not forget to amend 'zero_ino_node_unused()' function when changing + * the padding fields. + */ +struct ubifs_ino_node { + struct ubifs_ch ch; + __u8 key[UBIFS_MAX_KEY_LEN]; + __le64 creat_sqnum; + __le64 size; + __le64 atime_sec; + __le64 ctime_sec; + __le64 mtime_sec; + __le32 atime_nsec; + __le32 ctime_nsec; + __le32 mtime_nsec; + __le32 nlink; + __le32 uid; + __le32 gid; + __le32 mode; + __le32 flags; + __le32 data_len; + __le32 xattr_cnt; + __le32 xattr_size; + __u8 padding1[4]; /* Watch 'zero_ino_node_unused()' if changing! */ + __le32 xattr_names; + __le16 compr_type; + __u8 padding2[26]; /* Watch 'zero_ino_node_unused()' if changing! */ + __u8 data[]; +} __attribute__ ((packed)); + +/** + * struct ubifs_dent_node - directory entry node. + * @ch: common header + * @key: node key + * @inum: target inode number + * @padding1: reserved for future, zeroes + * @type: type of the target inode (%UBIFS_ITYPE_REG, %UBIFS_ITYPE_DIR, etc) + * @nlen: name length + * @padding2: reserved for future, zeroes + * @name: zero-terminated name + * + * Note, do not forget to amend 'zero_dent_node_unused()' function when + * changing the padding fields. + */ +struct ubifs_dent_node { + struct ubifs_ch ch; + __u8 key[UBIFS_MAX_KEY_LEN]; + __le64 inum; + __u8 padding1; + __u8 type; + __le16 nlen; + __u8 padding2[4]; /* Watch 'zero_dent_node_unused()' if changing! */ + __u8 name[]; +} __attribute__ ((packed)); + +/** + * struct ubifs_data_node - data node. + * @ch: common header + * @key: node key + * @size: uncompressed data size in bytes + * @compr_type: compression type (%UBIFS_COMPR_NONE, %UBIFS_COMPR_LZO, etc) + * @padding: reserved for future, zeroes + * @data: data + * + * Note, do not forget to amend 'zero_data_node_unused()' function when + * changing the padding fields. + */ +struct ubifs_data_node { + struct ubifs_ch ch; + __u8 key[UBIFS_MAX_KEY_LEN]; + __le32 size; + __le16 compr_type; + __u8 padding[2]; /* Watch 'zero_data_node_unused()' if changing! */ + __u8 data[]; +} __attribute__ ((packed)); + +/** + * struct ubifs_trun_node - truncation node. + * @ch: common header + * @inum: truncated inode number + * @padding: reserved for future, zeroes + * @old_size: size before truncation + * @new_size: size after truncation + * + * This node exists only in the journal and never goes to the main area. Note, + * do not forget to amend 'zero_trun_node_unused()' function when changing the + * padding fields. + */ +struct ubifs_trun_node { + struct ubifs_ch ch; + __le32 inum; + __u8 padding[12]; /* Watch 'zero_trun_node_unused()' if changing! */ + __le64 old_size; + __le64 new_size; +} __attribute__ ((packed)); + +/** + * struct ubifs_pad_node - padding node. + * @ch: common header + * @pad_len: how many bytes after this node are unused (because padded) + * @padding: reserved for future, zeroes + */ +struct ubifs_pad_node { + struct ubifs_ch ch; + __le32 pad_len; +} __attribute__ ((packed)); + +/** + * struct ubifs_sb_node - superblock node. + * @ch: common header + * @padding: reserved for future, zeroes + * @key_hash: type of hash function used in keys + * @key_fmt: format of the key + * @flags: file-system flags (%UBIFS_FLG_BIGLPT, etc) + * @min_io_size: minimal input/output unit size + * @leb_size: logical eraseblock size in bytes + * @leb_cnt: count of LEBs used by file-system + * @max_leb_cnt: maximum count of LEBs used by file-system + * @max_bud_bytes: maximum amount of data stored in buds + * @log_lebs: log size in logical eraseblocks + * @lpt_lebs: number of LEBs used for lprops table + * @orph_lebs: number of LEBs used for recording orphans + * @jhead_cnt: count of journal heads + * @fanout: tree fanout (max. number of links per indexing node) + * @lsave_cnt: number of LEB numbers in LPT's save table + * @fmt_version: UBIFS on-flash format version + * @default_compr: default compression algorithm (%UBIFS_COMPR_LZO, etc) + * @padding1: reserved for future, zeroes + * @rp_uid: reserve pool UID + * @rp_gid: reserve pool GID + * @rp_size: size of the reserved pool in bytes + * @padding2: reserved for future, zeroes + * @time_gran: time granularity in nanoseconds + * @uuid: UUID generated when the file system image was created + */ +struct ubifs_sb_node { + struct ubifs_ch ch; + __u8 padding[2]; + __u8 key_hash; + __u8 key_fmt; + __le32 flags; + __le32 min_io_size; + __le32 leb_size; + __le32 leb_cnt; + __le32 max_leb_cnt; + __le64 max_bud_bytes; + __le32 log_lebs; + __le32 lpt_lebs; + __le32 orph_lebs; + __le32 jhead_cnt; + __le32 fanout; + __le32 lsave_cnt; + __le32 fmt_version; + __le16 default_compr; + __u8 padding1[2]; + __le32 rp_uid; + __le32 rp_gid; + __le64 rp_size; + __le32 time_gran; + __u8 uuid[16]; + __u8 padding2[3972]; +} __attribute__ ((packed)); + +/** + * struct ubifs_mst_node - master node. + * @ch: common header + * @highest_inum: highest inode number in the committed index + * @cmt_no: commit number + * @flags: various flags (%UBIFS_MST_DIRTY, etc) + * @log_lnum: start of the log + * @root_lnum: LEB number of the root indexing node + * @root_offs: offset within @root_lnum + * @root_len: root indexing node length + * @gc_lnum: LEB reserved for garbage collection (%-1 value means the LEB was + * not reserved and should be reserved on mount) + * @ihead_lnum: LEB number of index head + * @ihead_offs: offset of index head + * @index_size: size of index on flash + * @total_free: total free space in bytes + * @total_dirty: total dirty space in bytes + * @total_used: total used space in bytes (includes only data LEBs) + * @total_dead: total dead space in bytes (includes only data LEBs) + * @total_dark: total dark space in bytes (includes only data LEBs) + * @lpt_lnum: LEB number of LPT root nnode + * @lpt_offs: offset of LPT root nnode + * @nhead_lnum: LEB number of LPT head + * @nhead_offs: offset of LPT head + * @ltab_lnum: LEB number of LPT's own lprops table + * @ltab_offs: offset of LPT's own lprops table + * @lsave_lnum: LEB number of LPT's save table (big model only) + * @lsave_offs: offset of LPT's save table (big model only) + * @lscan_lnum: LEB number of last LPT scan + * @empty_lebs: number of empty logical eraseblocks + * @idx_lebs: number of indexing logical eraseblocks + * @leb_cnt: count of LEBs used by file-system + * @padding: reserved for future, zeroes + */ +struct ubifs_mst_node { + struct ubifs_ch ch; + __le64 highest_inum; + __le64 cmt_no; + __le32 flags; + __le32 log_lnum; + __le32 root_lnum; + __le32 root_offs; + __le32 root_len; + __le32 gc_lnum; + __le32 ihead_lnum; + __le32 ihead_offs; + __le64 index_size; + __le64 total_free; + __le64 total_dirty; + __le64 total_used; + __le64 total_dead; + __le64 total_dark; + __le32 lpt_lnum; + __le32 lpt_offs; + __le32 nhead_lnum; + __le32 nhead_offs; + __le32 ltab_lnum; + __le32 ltab_offs; + __le32 lsave_lnum; + __le32 lsave_offs; + __le32 lscan_lnum; + __le32 empty_lebs; + __le32 idx_lebs; + __le32 leb_cnt; + __u8 padding[344]; +} __attribute__ ((packed)); + +/** + * struct ubifs_ref_node - logical eraseblock reference node. + * @ch: common header + * @lnum: the referred logical eraseblock number + * @offs: start offset in the referred LEB + * @jhead: journal head number + * @padding: reserved for future, zeroes + */ +struct ubifs_ref_node { + struct ubifs_ch ch; + __le32 lnum; + __le32 offs; + __le32 jhead; + __u8 padding[28]; +} __attribute__ ((packed)); + +/** + * struct ubifs_branch - key/reference/length branch + * @lnum: LEB number of the target node + * @offs: offset within @lnum + * @len: target node length + * @key: key + */ +struct ubifs_branch { + __le32 lnum; + __le32 offs; + __le32 len; + __u8 key[]; +} __attribute__ ((packed)); + +/** + * struct ubifs_idx_node - indexing node. + * @ch: common header + * @child_cnt: number of child index nodes + * @level: tree level + * @branches: LEB number / offset / length / key branches + */ +struct ubifs_idx_node { + struct ubifs_ch ch; + __le16 child_cnt; + __le16 level; + __u8 branches[]; +} __attribute__ ((packed)); + +/** + * struct ubifs_cs_node - commit start node. + * @ch: common header + * @cmt_no: commit number + */ +struct ubifs_cs_node { + struct ubifs_ch ch; + __le64 cmt_no; +} __attribute__ ((packed)); + +/** + * struct ubifs_orph_node - orphan node. + * @ch: common header + * @cmt_no: commit number (also top bit is set on the last node of the commit) + * @inos: inode numbers of orphans + */ +struct ubifs_orph_node { + struct ubifs_ch ch; + __le64 cmt_no; + __le64 inos[]; +} __attribute__ ((packed)); + +#endif /* __UBIFS_MEDIA_H__ */ diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h new file mode 100644 index 000000000000..e4f89f271827 --- /dev/null +++ b/fs/ubifs/ubifs.h @@ -0,0 +1,1649 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* Implementation version 0.7 */ + +#ifndef __UBIFS_H__ +#define __UBIFS_H__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ubifs-media.h" + +/* Version of this UBIFS implementation */ +#define UBIFS_VERSION 1 + +/* Normal UBIFS messages */ +#define ubifs_msg(fmt, ...) \ + printk(KERN_NOTICE "UBIFS: " fmt "\n", ##__VA_ARGS__) +/* UBIFS error messages */ +#define ubifs_err(fmt, ...) \ + printk(KERN_ERR "UBIFS error (pid %d): %s: " fmt "\n", current->pid, \ + __func__, ##__VA_ARGS__) +/* UBIFS warning messages */ +#define ubifs_warn(fmt, ...) \ + printk(KERN_WARNING "UBIFS warning (pid %d): %s: " fmt "\n", \ + current->pid, __func__, ##__VA_ARGS__) + +/* UBIFS file system VFS magic number */ +#define UBIFS_SUPER_MAGIC 0x24051905 + +/* Number of UBIFS blocks per VFS page */ +#define UBIFS_BLOCKS_PER_PAGE (PAGE_CACHE_SIZE / UBIFS_BLOCK_SIZE) +#define UBIFS_BLOCKS_PER_PAGE_SHIFT (PAGE_CACHE_SHIFT - UBIFS_BLOCK_SHIFT) + +/* "File system end of life" sequence number watermark */ +#define SQNUM_WARN_WATERMARK 0xFFFFFFFF00000000ULL +#define SQNUM_WATERMARK 0xFFFFFFFFFF000000ULL + +/* Minimum amount of data UBIFS writes to the flash */ +#define MIN_WRITE_SZ (UBIFS_DATA_NODE_SZ + 8) + +/* + * Currently we do not support inode number overlapping and re-using, so this + * watermark defines dangerous inode number level. This should be fixed later, + * although it is difficult to exceed current limit. Another option is to use + * 64-bit inode numbers, but this means more overhead. + */ +#define INUM_WARN_WATERMARK 0xFFF00000 +#define INUM_WATERMARK 0xFFFFFF00 + +/* Largest key size supported in this implementation */ +#define CUR_MAX_KEY_LEN UBIFS_SK_LEN + +/* Maximum number of entries in each LPT (LEB category) heap */ +#define LPT_HEAP_SZ 256 + +/* + * Background thread name pattern. The numbers are UBI device and volume + * numbers. + */ +#define BGT_NAME_PATTERN "ubifs_bgt%d_%d" + +/* Default write-buffer synchronization timeout (5 secs) */ +#define DEFAULT_WBUF_TIMEOUT (5 * HZ) + +/* Maximum possible inode number (only 32-bit inodes are supported now) */ +#define MAX_INUM 0xFFFFFFFF + +/* Number of non-data journal heads */ +#define NONDATA_JHEADS_CNT 2 + +/* Garbage collector head */ +#define GCHD 0 +/* Base journal head number */ +#define BASEHD 1 +/* First "general purpose" journal head */ +#define DATAHD 2 + +/* 'No change' value for 'ubifs_change_lp()' */ +#define LPROPS_NC 0x80000001 + +/* + * There is no notion of truncation key because truncation nodes do not exist + * in TNC. However, when replaying, it is handy to introduce fake "truncation" + * keys for truncation nodes because the code becomes simpler. So we define + * %UBIFS_TRUN_KEY type. + */ +#define UBIFS_TRUN_KEY UBIFS_KEY_TYPES_CNT + +/* + * How much a directory entry/extended attribute entry adds to the parent/host + * inode. + */ +#define CALC_DENT_SIZE(name_len) ALIGN(UBIFS_DENT_NODE_SZ + (name_len) + 1, 8) + +/* How much an extended attribute adds to the host inode */ +#define CALC_XATTR_BYTES(data_len) ALIGN(UBIFS_INO_NODE_SZ + (data_len) + 1, 8) + +/* + * Znodes which were not touched for 'OLD_ZNODE_AGE' seconds are considered + * "old", and znode which were touched last 'YOUNG_ZNODE_AGE' seconds ago are + * considered "young". This is used by shrinker when selecting znode to trim + * off. + */ +#define OLD_ZNODE_AGE 20 +#define YOUNG_ZNODE_AGE 5 + +/* + * Some compressors, like LZO, may end up with more data then the input buffer. + * So UBIFS always allocates larger output buffer, to be sure the compressor + * will not corrupt memory in case of worst case compression. + */ +#define WORST_COMPR_FACTOR 2 + +/* Maximum expected tree height for use by bottom_up_buf */ +#define BOTTOM_UP_HEIGHT 64 + +/* + * Lockdep classes for UBIFS inode @ui_mutex. + */ +enum { + WB_MUTEX_1 = 0, + WB_MUTEX_2 = 1, + WB_MUTEX_3 = 2, +}; + +/* + * Znode flags (actually, bit numbers which store the flags). + * + * DIRTY_ZNODE: znode is dirty + * COW_ZNODE: znode is being committed and a new instance of this znode has to + * be created before changing this znode + * OBSOLETE_ZNODE: znode is obsolete, which means it was deleted, but it is + * still in the commit list and the ongoing commit operation + * will commit it, and delete this znode after it is done + */ +enum { + DIRTY_ZNODE = 0, + COW_ZNODE = 1, + OBSOLETE_ZNODE = 2, +}; + +/* + * Commit states. + * + * COMMIT_RESTING: commit is not wanted + * COMMIT_BACKGROUND: background commit has been requested + * COMMIT_REQUIRED: commit is required + * COMMIT_RUNNING_BACKGROUND: background commit is running + * COMMIT_RUNNING_REQUIRED: commit is running and it is required + * COMMIT_BROKEN: commit failed + */ +enum { + COMMIT_RESTING = 0, + COMMIT_BACKGROUND, + COMMIT_REQUIRED, + COMMIT_RUNNING_BACKGROUND, + COMMIT_RUNNING_REQUIRED, + COMMIT_BROKEN, +}; + +/* + * 'ubifs_scan_a_node()' return values. + * + * SCANNED_GARBAGE: scanned garbage + * SCANNED_EMPTY_SPACE: scanned empty space + * SCANNED_A_NODE: scanned a valid node + * SCANNED_A_CORRUPT_NODE: scanned a corrupted node + * SCANNED_A_BAD_PAD_NODE: scanned a padding node with invalid pad length + * + * Greater than zero means: 'scanned that number of padding bytes' + */ +enum { + SCANNED_GARBAGE = 0, + SCANNED_EMPTY_SPACE = -1, + SCANNED_A_NODE = -2, + SCANNED_A_CORRUPT_NODE = -3, + SCANNED_A_BAD_PAD_NODE = -4, +}; + +/* + * LPT cnode flag bits. + * + * DIRTY_CNODE: cnode is dirty + * COW_CNODE: cnode is being committed and must be copied before writing + * OBSOLETE_CNODE: cnode is being committed and has been copied (or deleted), + * so it can (and must) be freed when the commit is finished + */ +enum { + DIRTY_CNODE = 0, + COW_CNODE = 1, + OBSOLETE_CNODE = 2, +}; + +/* + * Dirty flag bits (lpt_drty_flgs) for LPT special nodes. + * + * LTAB_DIRTY: ltab node is dirty + * LSAVE_DIRTY: lsave node is dirty + */ +enum { + LTAB_DIRTY = 1, + LSAVE_DIRTY = 2, +}; + +/* + * Return codes used by the garbage collector. + * @LEB_FREED: the logical eraseblock was freed and is ready to use + * @LEB_FREED_IDX: indexing LEB was freed and can be used only after the commit + * @LEB_RETAINED: the logical eraseblock was freed and retained for GC purposes + */ +enum { + LEB_FREED, + LEB_FREED_IDX, + LEB_RETAINED, +}; + +/** + * struct ubifs_old_idx - index node obsoleted since last commit start. + * @rb: rb-tree node + * @lnum: LEB number of obsoleted index node + * @offs: offset of obsoleted index node + */ +struct ubifs_old_idx { + struct rb_node rb; + int lnum; + int offs; +}; + +/* The below union makes it easier to deal with keys */ +union ubifs_key { + uint8_t u8[CUR_MAX_KEY_LEN]; + uint32_t u32[CUR_MAX_KEY_LEN/4]; + uint64_t u64[CUR_MAX_KEY_LEN/8]; + __le32 j32[CUR_MAX_KEY_LEN/4]; +}; + +/** + * struct ubifs_scan_node - UBIFS scanned node information. + * @list: list of scanned nodes + * @key: key of node scanned (if it has one) + * @sqnum: sequence number + * @type: type of node scanned + * @offs: offset with LEB of node scanned + * @len: length of node scanned + * @node: raw node + */ +struct ubifs_scan_node { + struct list_head list; + union ubifs_key key; + unsigned long long sqnum; + int type; + int offs; + int len; + void *node; +}; + +/** + * struct ubifs_scan_leb - UBIFS scanned LEB information. + * @lnum: logical eraseblock number + * @nodes_cnt: number of nodes scanned + * @nodes: list of struct ubifs_scan_node + * @endpt: end point (and therefore the start of empty space) + * @ecc: read returned -EBADMSG + * @buf: buffer containing entire LEB scanned + */ +struct ubifs_scan_leb { + int lnum; + int nodes_cnt; + struct list_head nodes; + int endpt; + int ecc; + void *buf; +}; + +/** + * struct ubifs_gced_idx_leb - garbage-collected indexing LEB. + * @list: list + * @lnum: LEB number + * @unmap: OK to unmap this LEB + * + * This data structure is used to temporary store garbage-collected indexing + * LEBs - they are not released immediately, but only after the next commit. + * This is needed to guarantee recoverability. + */ +struct ubifs_gced_idx_leb { + struct list_head list; + int lnum; + int unmap; +}; + +/** + * struct ubifs_inode - UBIFS in-memory inode description. + * @vfs_inode: VFS inode description object + * @creat_sqnum: sequence number at time of creation + * @xattr_size: summarized size of all extended attributes in bytes + * @xattr_cnt: count of extended attributes this inode has + * @xattr_names: sum of lengths of all extended attribute names belonging to + * this inode + * @dirty: non-zero if the inode is dirty + * @xattr: non-zero if this is an extended attribute inode + * @ui_mutex: serializes inode write-back with the rest of VFS operations, + * serializes "clean <-> dirty" state changes, protects @dirty, + * @ui_size, and @xattr_size + * @ui_lock: protects @synced_i_size + * @synced_i_size: synchronized size of inode, i.e. the value of inode size + * currently stored on the flash; used only for regular file + * inodes + * @ui_size: inode size used by UBIFS when writing to flash + * @flags: inode flags (@UBIFS_COMPR_FL, etc) + * @compr_type: default compression type used for this inode + * @data_len: length of the data attached to the inode + * @data: inode's data + * + * @ui_mutex exists for two main reasons. At first it prevents inodes from + * being written back while UBIFS changing them, being in the middle of an VFS + * operation. This way UBIFS makes sure the inode fields are consistent. For + * example, in 'ubifs_rename()' we change 3 inodes simultaneously, and + * write-back must not write any of them before we have finished. + * + * The second reason is budgeting - UBIFS has to budget all operations. If an + * operation is going to mark an inode dirty, it has to allocate budget for + * this. It cannot just mark it dirty because there is no guarantee there will + * be enough flash space to write the inode back later. This means UBIFS has + * to have full control over inode "clean <-> dirty" transitions (and pages + * actually). But unfortunately, VFS marks inodes dirty in many places, and it + * does not ask the file-system if it is allowed to do so (there is a notifier, + * but it is not enough), i.e., there is no mechanism to synchronize with this. + * So UBIFS has its own inode dirty flag and its own mutex to serialize + * "clean <-> dirty" transitions. + * + * The @synced_i_size field is used to make sure we never write pages which are + * beyond last synchronized inode size. See 'ubifs_writepage()' for more + * information. + * + * The @ui_size is a "shadow" variable for @inode->i_size and UBIFS uses + * @ui_size instead of @inode->i_size. The reason for this is that UBIFS cannot + * make sure @inode->i_size is always changed under @ui_mutex, because it + * cannot call 'vmtruncate()' with @ui_mutex locked, because it would deadlock + * with 'ubifs_writepage()' (see file.c). All the other inode fields are + * changed under @ui_mutex, so they do not need "shadow" fields. Note, one + * could consider to rework locking and base it on "shadow" fields. + */ +struct ubifs_inode { + struct inode vfs_inode; + unsigned long long creat_sqnum; + unsigned int xattr_size; + unsigned int xattr_cnt; + unsigned int xattr_names; + unsigned int dirty:1; + unsigned int xattr:1; + struct mutex ui_mutex; + spinlock_t ui_lock; + loff_t synced_i_size; + loff_t ui_size; + int flags; + int compr_type; + int data_len; + void *data; +}; + +/** + * struct ubifs_unclean_leb - records a LEB recovered under read-only mode. + * @list: list + * @lnum: LEB number of recovered LEB + * @endpt: offset where recovery ended + * + * This structure records a LEB identified during recovery that needs to be + * cleaned but was not because UBIFS was mounted read-only. The information + * is used to clean the LEB when remounting to read-write mode. + */ +struct ubifs_unclean_leb { + struct list_head list; + int lnum; + int endpt; +}; + +/* + * LEB properties flags. + * + * LPROPS_UNCAT: not categorized + * LPROPS_DIRTY: dirty > 0, not index + * LPROPS_DIRTY_IDX: dirty + free > UBIFS_CH_SZ and index + * LPROPS_FREE: free > 0, not empty, not index + * LPROPS_HEAP_CNT: number of heaps used for storing categorized LEBs + * LPROPS_EMPTY: LEB is empty, not taken + * LPROPS_FREEABLE: free + dirty == leb_size, not index, not taken + * LPROPS_FRDI_IDX: free + dirty == leb_size and index, may be taken + * LPROPS_CAT_MASK: mask for the LEB categories above + * LPROPS_TAKEN: LEB was taken (this flag is not saved on the media) + * LPROPS_INDEX: LEB contains indexing nodes (this flag also exists on flash) + */ +enum { + LPROPS_UNCAT = 0, + LPROPS_DIRTY = 1, + LPROPS_DIRTY_IDX = 2, + LPROPS_FREE = 3, + LPROPS_HEAP_CNT = 3, + LPROPS_EMPTY = 4, + LPROPS_FREEABLE = 5, + LPROPS_FRDI_IDX = 6, + LPROPS_CAT_MASK = 15, + LPROPS_TAKEN = 16, + LPROPS_INDEX = 32, +}; + +/** + * struct ubifs_lprops - logical eraseblock properties. + * @free: amount of free space in bytes + * @dirty: amount of dirty space in bytes + * @flags: LEB properties flags (see above) + * @lnum: LEB number + * @list: list of same-category lprops (for LPROPS_EMPTY and LPROPS_FREEABLE) + * @hpos: heap position in heap of same-category lprops (other categories) + */ +struct ubifs_lprops { + int free; + int dirty; + int flags; + int lnum; + union { + struct list_head list; + int hpos; + }; +}; + +/** + * struct ubifs_lpt_lprops - LPT logical eraseblock properties. + * @free: amount of free space in bytes + * @dirty: amount of dirty space in bytes + * @tgc: trivial GC flag (1 => unmap after commit end) + * @cmt: commit flag (1 => reserved for commit) + */ +struct ubifs_lpt_lprops { + int free; + int dirty; + unsigned tgc : 1; + unsigned cmt : 1; +}; + +/** + * struct ubifs_lp_stats - statistics of eraseblocks in the main area. + * @empty_lebs: number of empty LEBs + * @taken_empty_lebs: number of taken LEBs + * @idx_lebs: number of indexing LEBs + * @total_free: total free space in bytes + * @total_dirty: total dirty space in bytes + * @total_used: total used space in bytes (includes only data LEBs) + * @total_dead: total dead space in bytes (includes only data LEBs) + * @total_dark: total dark space in bytes (includes only data LEBs) + * + * N.B. total_dirty and total_used are different to other total_* fields, + * because they account _all_ LEBs, not just data LEBs. + * + * 'taken_empty_lebs' counts the LEBs that are in the transient state of having + * been 'taken' for use but not yet written to. 'taken_empty_lebs' is needed + * to account correctly for gc_lnum, otherwise 'empty_lebs' could be used + * by itself (in which case 'unused_lebs' would be a better name). In the case + * of gc_lnum, it is 'taken' at mount time or whenever a LEB is retained by GC, + * but unlike other empty LEBs that are 'taken', it may not be written straight + * away (i.e. before the next commit start or unmount), so either gc_lnum must + * be specially accounted for, or the current approach followed i.e. count it + * under 'taken_empty_lebs'. + */ +struct ubifs_lp_stats { + int empty_lebs; + int taken_empty_lebs; + int idx_lebs; + long long total_free; + long long total_dirty; + long long total_used; + long long total_dead; + long long total_dark; +}; + +struct ubifs_nnode; + +/** + * struct ubifs_cnode - LEB Properties Tree common node. + * @parent: parent nnode + * @cnext: next cnode to commit + * @flags: flags (%DIRTY_LPT_NODE or %OBSOLETE_LPT_NODE) + * @iip: index in parent + * @level: level in the tree (zero for pnodes, greater than zero for nnodes) + * @num: node number + */ +struct ubifs_cnode { + struct ubifs_nnode *parent; + struct ubifs_cnode *cnext; + unsigned long flags; + int iip; + int level; + int num; +}; + +/** + * struct ubifs_pnode - LEB Properties Tree leaf node. + * @parent: parent nnode + * @cnext: next cnode to commit + * @flags: flags (%DIRTY_LPT_NODE or %OBSOLETE_LPT_NODE) + * @iip: index in parent + * @level: level in the tree (always zero for pnodes) + * @num: node number + * @lprops: LEB properties array + */ +struct ubifs_pnode { + struct ubifs_nnode *parent; + struct ubifs_cnode *cnext; + unsigned long flags; + int iip; + int level; + int num; + struct ubifs_lprops lprops[UBIFS_LPT_FANOUT]; +}; + +/** + * struct ubifs_nbranch - LEB Properties Tree internal node branch. + * @lnum: LEB number of child + * @offs: offset of child + * @nnode: nnode child + * @pnode: pnode child + * @cnode: cnode child + */ +struct ubifs_nbranch { + int lnum; + int offs; + union { + struct ubifs_nnode *nnode; + struct ubifs_pnode *pnode; + struct ubifs_cnode *cnode; + }; +}; + +/** + * struct ubifs_nnode - LEB Properties Tree internal node. + * @parent: parent nnode + * @cnext: next cnode to commit + * @flags: flags (%DIRTY_LPT_NODE or %OBSOLETE_LPT_NODE) + * @iip: index in parent + * @level: level in the tree (always greater than zero for nnodes) + * @num: node number + * @nbranch: branches to child nodes + */ +struct ubifs_nnode { + struct ubifs_nnode *parent; + struct ubifs_cnode *cnext; + unsigned long flags; + int iip; + int level; + int num; + struct ubifs_nbranch nbranch[UBIFS_LPT_FANOUT]; +}; + +/** + * struct ubifs_lpt_heap - heap of categorized lprops. + * @arr: heap array + * @cnt: number in heap + * @max_cnt: maximum number allowed in heap + * + * There are %LPROPS_HEAP_CNT heaps. + */ +struct ubifs_lpt_heap { + struct ubifs_lprops **arr; + int cnt; + int max_cnt; +}; + +/* + * Return codes for LPT scan callback function. + * + * LPT_SCAN_CONTINUE: continue scanning + * LPT_SCAN_ADD: add the LEB properties scanned to the tree in memory + * LPT_SCAN_STOP: stop scanning + */ +enum { + LPT_SCAN_CONTINUE = 0, + LPT_SCAN_ADD = 1, + LPT_SCAN_STOP = 2, +}; + +struct ubifs_info; + +/* Callback used by the 'ubifs_lpt_scan_nolock()' function */ +typedef int (*ubifs_lpt_scan_callback)(struct ubifs_info *c, + const struct ubifs_lprops *lprops, + int in_tree, void *data); + +/** + * struct ubifs_wbuf - UBIFS write-buffer. + * @c: UBIFS file-system description object + * @buf: write-buffer (of min. flash I/O unit size) + * @lnum: logical eraseblock number the write-buffer points to + * @offs: write-buffer offset in this logical eraseblock + * @avail: number of bytes available in the write-buffer + * @used: number of used bytes in the write-buffer + * @dtype: type of data stored in this LEB (%UBI_LONGTERM, %UBI_SHORTTERM, + * %UBI_UNKNOWN) + * @jhead: journal head the mutex belongs to (note, needed only to shut lockdep + * up by 'mutex_lock_nested()). + * @sync_callback: write-buffer synchronization callback + * @io_mutex: serializes write-buffer I/O + * @lock: serializes @buf, @lnum, @offs, @avail, @used, @next_ino and @inodes + * fields + * @timer: write-buffer timer + * @timeout: timer expire interval in jiffies + * @need_sync: it is set if its timer expired and needs sync + * @next_ino: points to the next position of the following inode number + * @inodes: stores the inode numbers of the nodes which are in wbuf + * + * The write-buffer synchronization callback is called when the write-buffer is + * synchronized in order to notify how much space was wasted due to + * write-buffer padding and how much free space is left in the LEB. + * + * Note: the fields @buf, @lnum, @offs, @avail and @used can be read under + * spin-lock or mutex because they are written under both mutex and spin-lock. + * @buf is appended to under mutex but overwritten under both mutex and + * spin-lock. Thus the data between @buf and @buf + @used can be read under + * spinlock. + */ +struct ubifs_wbuf { + struct ubifs_info *c; + void *buf; + int lnum; + int offs; + int avail; + int used; + int dtype; + int jhead; + int (*sync_callback)(struct ubifs_info *c, int lnum, int free, int pad); + struct mutex io_mutex; + spinlock_t lock; + struct timer_list timer; + int timeout; + int need_sync; + int next_ino; + ino_t *inodes; +}; + +/** + * struct ubifs_bud - bud logical eraseblock. + * @lnum: logical eraseblock number + * @start: where the (uncommitted) bud data starts + * @jhead: journal head number this bud belongs to + * @list: link in the list buds belonging to the same journal head + * @rb: link in the tree of all buds + */ +struct ubifs_bud { + int lnum; + int start; + int jhead; + struct list_head list; + struct rb_node rb; +}; + +/** + * struct ubifs_jhead - journal head. + * @wbuf: head's write-buffer + * @buds_list: list of bud LEBs belonging to this journal head + * + * Note, the @buds list is protected by the @c->buds_lock. + */ +struct ubifs_jhead { + struct ubifs_wbuf wbuf; + struct list_head buds_list; +}; + +/** + * struct ubifs_zbranch - key/coordinate/length branch stored in znodes. + * @key: key + * @znode: znode address in memory + * @lnum: LEB number of the indexing node + * @offs: offset of the indexing node within @lnum + * @len: target node length + */ +struct ubifs_zbranch { + union ubifs_key key; + union { + struct ubifs_znode *znode; + void *leaf; + }; + int lnum; + int offs; + int len; +}; + +/** + * struct ubifs_znode - in-memory representation of an indexing node. + * @parent: parent znode or NULL if it is the root + * @cnext: next znode to commit + * @flags: znode flags (%DIRTY_ZNODE, %COW_ZNODE or %OBSOLETE_ZNODE) + * @time: last access time (seconds) + * @level: level of the entry in the TNC tree + * @child_cnt: count of child znodes + * @iip: index in parent's zbranch array + * @alt: lower bound of key range has altered i.e. child inserted at slot 0 + * @lnum: LEB number of the corresponding indexing node + * @offs: offset of the corresponding indexing node + * @len: length of the corresponding indexing node + * @zbranch: array of znode branches (@c->fanout elements) + */ +struct ubifs_znode { + struct ubifs_znode *parent; + struct ubifs_znode *cnext; + unsigned long flags; + unsigned long time; + int level; + int child_cnt; + int iip; + int alt; +#ifdef CONFIG_UBIFS_FS_DEBUG + int lnum, offs, len; +#endif + struct ubifs_zbranch zbranch[]; +}; + +/** + * struct ubifs_node_range - node length range description data structure. + * @len: fixed node length + * @min_len: minimum possible node length + * @max_len: maximum possible node length + * + * If @max_len is %0, the node has fixed length @len. + */ +struct ubifs_node_range { + union { + int len; + int min_len; + }; + int max_len; +}; + +/** + * struct ubifs_compressor - UBIFS compressor description structure. + * @compr_type: compressor type (%UBIFS_COMPR_LZO, etc) + * @cc: cryptoapi compressor handle + * @comp_mutex: mutex used during compression + * @decomp_mutex: mutex used during decompression + * @name: compressor name + * @capi_name: cryptoapi compressor name + */ +struct ubifs_compressor { + int compr_type; + struct crypto_comp *cc; + struct mutex *comp_mutex; + struct mutex *decomp_mutex; + const char *name; + const char *capi_name; +}; + +/** + * struct ubifs_budget_req - budget requirements of an operation. + * + * @fast: non-zero if the budgeting should try to aquire budget quickly and + * should not try to call write-back + * @recalculate: non-zero if @idx_growth, @data_growth, and @dd_growth fields + * have to be re-calculated + * @new_page: non-zero if the operation adds a new page + * @dirtied_page: non-zero if the operation makes a page dirty + * @new_dent: non-zero if the operation adds a new directory entry + * @mod_dent: non-zero if the operation removes or modifies an existing + * directory entry + * @new_ino: non-zero if the operation adds a new inode + * @new_ino_d: now much data newly created inode contains + * @dirtied_ino: how many inodes the operation makes dirty + * @dirtied_ino_d: now much data dirtied inode contains + * @idx_growth: how much the index will supposedly grow + * @data_growth: how much new data the operation will supposedly add + * @dd_growth: how much data that makes other data dirty the operation will + * supposedly add + * + * @idx_growth, @data_growth and @dd_growth are not used in budget request. The + * budgeting subsystem caches index and data growth values there to avoid + * re-calculating them when the budget is released. However, if @idx_growth is + * %-1, it is calculated by the release function using other fields. + * + * An inode may contain 4KiB of data at max., thus the widths of @new_ino_d + * is 13 bits, and @dirtied_ino_d - 15, because up to 4 inodes may be made + * dirty by the re-name operation. + */ +struct ubifs_budget_req { + unsigned int fast:1; + unsigned int recalculate:1; + unsigned int new_page:1; + unsigned int dirtied_page:1; + unsigned int new_dent:1; + unsigned int mod_dent:1; + unsigned int new_ino:1; + unsigned int new_ino_d:13; +#ifndef UBIFS_DEBUG + unsigned int dirtied_ino:4; + unsigned int dirtied_ino_d:15; +#else + /* Not bit-fields to check for overflows */ + unsigned int dirtied_ino; + unsigned int dirtied_ino_d; +#endif + int idx_growth; + int data_growth; + int dd_growth; +}; + +/** + * struct ubifs_orphan - stores the inode number of an orphan. + * @rb: rb-tree node of rb-tree of orphans sorted by inode number + * @list: list head of list of orphans in order added + * @new_list: list head of list of orphans added since the last commit + * @cnext: next orphan to commit + * @dnext: next orphan to delete + * @inum: inode number + * @new: %1 => added since the last commit, otherwise %0 + */ +struct ubifs_orphan { + struct rb_node rb; + struct list_head list; + struct list_head new_list; + struct ubifs_orphan *cnext; + struct ubifs_orphan *dnext; + ino_t inum; + int new; +}; + +/** + * struct ubifs_mount_opts - UBIFS-specific mount options information. + * @unmount_mode: selected unmount mode (%0 default, %1 normal, %2 fast) + */ +struct ubifs_mount_opts { + unsigned int unmount_mode:2; +}; + +/** + * struct ubifs_info - UBIFS file-system description data structure + * (per-superblock). + * @vfs_sb: VFS @struct super_block object + * @bdi: backing device info object to make VFS happy and disable readahead + * + * @highest_inum: highest used inode number + * @vfs_gen: VFS inode generation counter + * @max_sqnum: current global sequence number + * @cmt_no: commit number (last successfully completed commit) + * @cnt_lock: protects @highest_inum, @vfs_gen, and @max_sqnum counters + * @fmt_version: UBIFS on-flash format version + * @uuid: UUID from super block + * + * @lhead_lnum: log head logical eraseblock number + * @lhead_offs: log head offset + * @ltail_lnum: log tail logical eraseblock number (offset is always 0) + * @log_mutex: protects the log, @lhead_lnum, @lhead_offs, @ltail_lnum, and + * @bud_bytes + * @min_log_bytes: minimum required number of bytes in the log + * @cmt_bud_bytes: used during commit to temporarily amount of bytes in + * committed buds + * + * @buds: tree of all buds indexed by bud LEB number + * @bud_bytes: how many bytes of flash is used by buds + * @buds_lock: protects the @buds tree, @bud_bytes, and per-journal head bud + * lists + * @jhead_cnt: count of journal heads + * @jheads: journal heads (head zero is base head) + * @max_bud_bytes: maximum number of bytes allowed in buds + * @bg_bud_bytes: number of bud bytes when background commit is initiated + * @old_buds: buds to be released after commit ends + * @max_bud_cnt: maximum number of buds + * + * @commit_sem: synchronizes committer with other processes + * @cmt_state: commit state + * @cs_lock: commit state lock + * @cmt_wq: wait queue to sleep on if the log is full and a commit is running + * @fast_unmount: do not run journal commit before un-mounting + * @big_lpt: flag that LPT is too big to write whole during commit + * @check_lpt_free: flag that indicates LPT GC may be needed + * @nospace: non-zero if the file-system does not have flash space (used as + * optimization) + * @nospace_rp: the same as @nospace, but additionally means that even reserved + * pool is full + * + * @tnc_mutex: protects the Tree Node Cache (TNC), @zroot, @cnext, @enext, and + * @calc_idx_sz + * @zroot: zbranch which points to the root index node and znode + * @cnext: next znode to commit + * @enext: next znode to commit to empty space + * @gap_lebs: array of LEBs used by the in-gaps commit method + * @cbuf: commit buffer + * @ileb_buf: buffer for commit in-the-gaps method + * @ileb_len: length of data in ileb_buf + * @ihead_lnum: LEB number of index head + * @ihead_offs: offset of index head + * @ilebs: pre-allocated index LEBs + * @ileb_cnt: number of pre-allocated index LEBs + * @ileb_nxt: next pre-allocated index LEBs + * @old_idx: tree of index nodes obsoleted since the last commit start + * @bottom_up_buf: a buffer which is used by 'dirty_cow_bottom_up()' in tnc.c + * @new_ihead_lnum: used by debugging to check ihead_lnum + * @new_ihead_offs: used by debugging to check ihead_offs + * + * @mst_node: master node + * @mst_offs: offset of valid master node + * @mst_mutex: protects the master node area, @mst_node, and @mst_offs + * + * @log_lebs: number of logical eraseblocks in the log + * @log_bytes: log size in bytes + * @log_last: last LEB of the log + * @lpt_lebs: number of LEBs used for lprops table + * @lpt_first: first LEB of the lprops table area + * @lpt_last: last LEB of the lprops table area + * @orph_lebs: number of LEBs used for the orphan area + * @orph_first: first LEB of the orphan area + * @orph_last: last LEB of the orphan area + * @main_lebs: count of LEBs in the main area + * @main_first: first LEB of the main area + * @main_bytes: main area size in bytes + * @default_compr: default compression algorithm (%UBIFS_COMPR_LZO, etc) + * + * @key_hash_type: type of the key hash + * @key_hash: direntry key hash function + * @key_fmt: key format + * @key_len: key length + * @fanout: fanout of the index tree (number of links per indexing node) + * + * @min_io_size: minimal input/output unit size + * @min_io_shift: number of bits in @min_io_size minus one + * @leb_size: logical eraseblock size in bytes + * @half_leb_size: half LEB size + * @leb_cnt: count of logical eraseblocks + * @max_leb_cnt: maximum count of logical eraseblocks + * @old_leb_cnt: count of logical eraseblocks before re-size + * @ro_media: the underlying UBI volume is read-only + * + * @dirty_pg_cnt: number of dirty pages (not used) + * @dirty_zn_cnt: number of dirty znodes + * @clean_zn_cnt: number of clean znodes + * + * @budg_idx_growth: amount of bytes budgeted for index growth + * @budg_data_growth: amount of bytes budgeted for cached data + * @budg_dd_growth: amount of bytes budgeted for cached data that will make + * other data dirty + * @budg_uncommitted_idx: amount of bytes were budgeted for growth of the index, + * but which still have to be taken into account because + * the index has not been committed so far + * @space_lock: protects @budg_idx_growth, @budg_data_growth, @budg_dd_growth, + * @budg_uncommited_idx, @min_idx_lebs, @old_idx_sz, and @lst; + * @min_idx_lebs: minimum number of LEBs required for the index + * @old_idx_sz: size of index on flash + * @calc_idx_sz: temporary variable which is used to calculate new index size + * (contains accurate new index size at end of TNC commit start) + * @lst: lprops statistics + * + * @page_budget: budget for a page + * @inode_budget: budget for an inode + * @dent_budget: budget for a directory entry + * + * @ref_node_alsz: size of the LEB reference node aligned to the min. flash + * I/O unit + * @mst_node_alsz: master node aligned size + * @min_idx_node_sz: minimum indexing node aligned on 8-bytes boundary + * @max_idx_node_sz: maximum indexing node aligned on 8-bytes boundary + * @max_inode_sz: maximum possible inode size in bytes + * @max_znode_sz: size of znode in bytes + * @dead_wm: LEB dead space watermark + * @dark_wm: LEB dark space watermark + * @block_cnt: count of 4KiB blocks on the FS + * + * @ranges: UBIFS node length ranges + * @ubi: UBI volume descriptor + * @di: UBI device information + * @vi: UBI volume information + * + * @orph_tree: rb-tree of orphan inode numbers + * @orph_list: list of orphan inode numbers in order added + * @orph_new: list of orphan inode numbers added since last commit + * @orph_cnext: next orphan to commit + * @orph_dnext: next orphan to delete + * @orphan_lock: lock for orph_tree and orph_new + * @orph_buf: buffer for orphan nodes + * @new_orphans: number of orphans since last commit + * @cmt_orphans: number of orphans being committed + * @tot_orphans: number of orphans in the rb_tree + * @max_orphans: maximum number of orphans allowed + * @ohead_lnum: orphan head LEB number + * @ohead_offs: orphan head offset + * @no_orphs: non-zero if there are no orphans + * + * @bgt: UBIFS background thread + * @bgt_name: background thread name + * @need_bgt: if background thread should run + * @need_wbuf_sync: if write-buffers have to be synchronized + * + * @gc_lnum: LEB number used for garbage collection + * @sbuf: a buffer of LEB size used by GC and replay for scanning + * @idx_gc: list of index LEBs that have been garbage collected + * @idx_gc_cnt: number of elements on the idx_gc list + * + * @infos_list: links all 'ubifs_info' objects + * @umount_mutex: serializes shrinker and un-mount + * @shrinker_run_no: shrinker run number + * + * @space_bits: number of bits needed to record free or dirty space + * @lpt_lnum_bits: number of bits needed to record a LEB number in the LPT + * @lpt_offs_bits: number of bits needed to record an offset in the LPT + * @lpt_spc_bits: number of bits needed to space in the LPT + * @pcnt_bits: number of bits needed to record pnode or nnode number + * @lnum_bits: number of bits needed to record LEB number + * @nnode_sz: size of on-flash nnode + * @pnode_sz: size of on-flash pnode + * @ltab_sz: size of on-flash LPT lprops table + * @lsave_sz: size of on-flash LPT save table + * @pnode_cnt: number of pnodes + * @nnode_cnt: number of nnodes + * @lpt_hght: height of the LPT + * @pnodes_have: number of pnodes in memory + * + * @lp_mutex: protects lprops table and all the other lprops-related fields + * @lpt_lnum: LEB number of the root nnode of the LPT + * @lpt_offs: offset of the root nnode of the LPT + * @nhead_lnum: LEB number of LPT head + * @nhead_offs: offset of LPT head + * @lpt_drty_flgs: dirty flags for LPT special nodes e.g. ltab + * @dirty_nn_cnt: number of dirty nnodes + * @dirty_pn_cnt: number of dirty pnodes + * @lpt_sz: LPT size + * @lpt_nod_buf: buffer for an on-flash nnode or pnode + * @lpt_buf: buffer of LEB size used by LPT + * @nroot: address in memory of the root nnode of the LPT + * @lpt_cnext: next LPT node to commit + * @lpt_heap: array of heaps of categorized lprops + * @dirty_idx: a (reverse sorted) copy of the LPROPS_DIRTY_IDX heap as at + * previous commit start + * @uncat_list: list of un-categorized LEBs + * @empty_list: list of empty LEBs + * @freeable_list: list of freeable non-index LEBs (free + dirty == leb_size) + * @frdi_idx_list: list of freeable index LEBs (free + dirty == leb_size) + * @freeable_cnt: number of freeable LEBs in @freeable_list + * + * @ltab_lnum: LEB number of LPT's own lprops table + * @ltab_offs: offset of LPT's own lprops table + * @ltab: LPT's own lprops table + * @ltab_cmt: LPT's own lprops table (commit copy) + * @lsave_cnt: number of LEB numbers in LPT's save table + * @lsave_lnum: LEB number of LPT's save table + * @lsave_offs: offset of LPT's save table + * @lsave: LPT's save table + * @lscan_lnum: LEB number of last LPT scan + * + * @rp_size: size of the reserved pool in bytes + * @report_rp_size: size of the reserved pool reported to user-space + * @rp_uid: reserved pool user ID + * @rp_gid: reserved pool group ID + * + * @empty: if the UBI device is empty + * @replay_tree: temporary tree used during journal replay + * @replay_list: temporary list used during journal replay + * @replay_buds: list of buds to replay + * @cs_sqnum: sequence number of first node in the log (commit start node) + * @replay_sqnum: sequence number of node currently being replayed + * @need_recovery: file-system needs recovery + * @replaying: set to %1 during journal replay + * @unclean_leb_list: LEBs to recover when mounting ro to rw + * @rcvrd_mst_node: recovered master node to write when mounting ro to rw + * @size_tree: inode size information for recovery + * @remounting_rw: set while remounting from ro to rw (sb flags have MS_RDONLY) + * @mount_opts: UBIFS-specific mount options + * + * @dbg_buf: a buffer of LEB size used for debugging purposes + * @old_zroot: old index root - used by 'dbg_check_old_index()' + * @old_zroot_level: old index root level - used by 'dbg_check_old_index()' + * @old_zroot_sqnum: old index root sqnum - used by 'dbg_check_old_index()' + * @failure_mode: failure mode for recovery testing + * @fail_delay: 0=>don't delay, 1=>delay a time, 2=>delay a number of calls + * @fail_timeout: time in jiffies when delay of failure mode expires + * @fail_cnt: current number of calls to failure mode I/O functions + * @fail_cnt_max: number of calls by which to delay failure mode + */ +struct ubifs_info { + struct super_block *vfs_sb; + struct backing_dev_info bdi; + + ino_t highest_inum; + unsigned int vfs_gen; + unsigned long long max_sqnum; + unsigned long long cmt_no; + spinlock_t cnt_lock; + int fmt_version; + unsigned char uuid[16]; + + int lhead_lnum; + int lhead_offs; + int ltail_lnum; + struct mutex log_mutex; + int min_log_bytes; + long long cmt_bud_bytes; + + struct rb_root buds; + long long bud_bytes; + spinlock_t buds_lock; + int jhead_cnt; + struct ubifs_jhead *jheads; + long long max_bud_bytes; + long long bg_bud_bytes; + struct list_head old_buds; + int max_bud_cnt; + + struct rw_semaphore commit_sem; + int cmt_state; + spinlock_t cs_lock; + wait_queue_head_t cmt_wq; + unsigned int fast_unmount:1; + unsigned int big_lpt:1; + unsigned int check_lpt_free:1; + unsigned int nospace:1; + unsigned int nospace_rp:1; + + struct mutex tnc_mutex; + struct ubifs_zbranch zroot; + struct ubifs_znode *cnext; + struct ubifs_znode *enext; + int *gap_lebs; + void *cbuf; + void *ileb_buf; + int ileb_len; + int ihead_lnum; + int ihead_offs; + int *ilebs; + int ileb_cnt; + int ileb_nxt; + struct rb_root old_idx; + int *bottom_up_buf; +#ifdef CONFIG_UBIFS_FS_DEBUG + int new_ihead_lnum; + int new_ihead_offs; +#endif + + struct ubifs_mst_node *mst_node; + int mst_offs; + struct mutex mst_mutex; + + int log_lebs; + long long log_bytes; + int log_last; + int lpt_lebs; + int lpt_first; + int lpt_last; + int orph_lebs; + int orph_first; + int orph_last; + int main_lebs; + int main_first; + long long main_bytes; + int default_compr; + + uint8_t key_hash_type; + uint32_t (*key_hash)(const char *str, int len); + int key_fmt; + int key_len; + int fanout; + + int min_io_size; + int min_io_shift; + int leb_size; + int half_leb_size; + int leb_cnt; + int max_leb_cnt; + int old_leb_cnt; + int ro_media; + + atomic_long_t dirty_pg_cnt; + atomic_long_t dirty_zn_cnt; + atomic_long_t clean_zn_cnt; + + long long budg_idx_growth; + long long budg_data_growth; + long long budg_dd_growth; + long long budg_uncommitted_idx; + spinlock_t space_lock; + int min_idx_lebs; + unsigned long long old_idx_sz; + unsigned long long calc_idx_sz; + struct ubifs_lp_stats lst; + + int page_budget; + int inode_budget; + int dent_budget; + + int ref_node_alsz; + int mst_node_alsz; + int min_idx_node_sz; + int max_idx_node_sz; + long long max_inode_sz; + int max_znode_sz; + int dead_wm; + int dark_wm; + int block_cnt; + + struct ubifs_node_range ranges[UBIFS_NODE_TYPES_CNT]; + struct ubi_volume_desc *ubi; + struct ubi_device_info di; + struct ubi_volume_info vi; + + struct rb_root orph_tree; + struct list_head orph_list; + struct list_head orph_new; + struct ubifs_orphan *orph_cnext; + struct ubifs_orphan *orph_dnext; + spinlock_t orphan_lock; + void *orph_buf; + int new_orphans; + int cmt_orphans; + int tot_orphans; + int max_orphans; + int ohead_lnum; + int ohead_offs; + int no_orphs; + + struct task_struct *bgt; + char bgt_name[sizeof(BGT_NAME_PATTERN) + 9]; + int need_bgt; + int need_wbuf_sync; + + int gc_lnum; + void *sbuf; + struct list_head idx_gc; + int idx_gc_cnt; + + struct list_head infos_list; + struct mutex umount_mutex; + unsigned int shrinker_run_no; + + int space_bits; + int lpt_lnum_bits; + int lpt_offs_bits; + int lpt_spc_bits; + int pcnt_bits; + int lnum_bits; + int nnode_sz; + int pnode_sz; + int ltab_sz; + int lsave_sz; + int pnode_cnt; + int nnode_cnt; + int lpt_hght; + int pnodes_have; + + struct mutex lp_mutex; + int lpt_lnum; + int lpt_offs; + int nhead_lnum; + int nhead_offs; + int lpt_drty_flgs; + int dirty_nn_cnt; + int dirty_pn_cnt; + long long lpt_sz; + void *lpt_nod_buf; + void *lpt_buf; + struct ubifs_nnode *nroot; + struct ubifs_cnode *lpt_cnext; + struct ubifs_lpt_heap lpt_heap[LPROPS_HEAP_CNT]; + struct ubifs_lpt_heap dirty_idx; + struct list_head uncat_list; + struct list_head empty_list; + struct list_head freeable_list; + struct list_head frdi_idx_list; + int freeable_cnt; + + int ltab_lnum; + int ltab_offs; + struct ubifs_lpt_lprops *ltab; + struct ubifs_lpt_lprops *ltab_cmt; + int lsave_cnt; + int lsave_lnum; + int lsave_offs; + int *lsave; + int lscan_lnum; + + long long rp_size; + long long report_rp_size; + uid_t rp_uid; + gid_t rp_gid; + + /* The below fields are used only during mounting and re-mounting */ + int empty; + struct rb_root replay_tree; + struct list_head replay_list; + struct list_head replay_buds; + unsigned long long cs_sqnum; + unsigned long long replay_sqnum; + int need_recovery; + int replaying; + struct list_head unclean_leb_list; + struct ubifs_mst_node *rcvrd_mst_node; + struct rb_root size_tree; + int remounting_rw; + struct ubifs_mount_opts mount_opts; + +#ifdef CONFIG_UBIFS_FS_DEBUG + void *dbg_buf; + struct ubifs_zbranch old_zroot; + int old_zroot_level; + unsigned long long old_zroot_sqnum; + int failure_mode; + int fail_delay; + unsigned long fail_timeout; + unsigned int fail_cnt; + unsigned int fail_cnt_max; +#endif +}; + +extern struct list_head ubifs_infos; +extern spinlock_t ubifs_infos_lock; +extern atomic_long_t ubifs_clean_zn_cnt; +extern struct kmem_cache *ubifs_inode_slab; +extern struct super_operations ubifs_super_operations; +extern struct address_space_operations ubifs_file_address_operations; +extern struct file_operations ubifs_file_operations; +extern struct inode_operations ubifs_file_inode_operations; +extern struct file_operations ubifs_dir_operations; +extern struct inode_operations ubifs_dir_inode_operations; +extern struct inode_operations ubifs_symlink_inode_operations; +extern struct backing_dev_info ubifs_backing_dev_info; +extern struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT]; + +/* io.c */ +int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len); +int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs, + int dtype); +int ubifs_wbuf_init(struct ubifs_info *c, struct ubifs_wbuf *wbuf); +int ubifs_read_node(const struct ubifs_info *c, void *buf, int type, int len, + int lnum, int offs); +int ubifs_read_node_wbuf(struct ubifs_wbuf *wbuf, void *buf, int type, int len, + int lnum, int offs); +int ubifs_write_node(struct ubifs_info *c, void *node, int len, int lnum, + int offs, int dtype); +int ubifs_check_node(const struct ubifs_info *c, const void *buf, int lnum, + int offs, int quiet); +void ubifs_prepare_node(struct ubifs_info *c, void *buf, int len, int pad); +void ubifs_prep_grp_node(struct ubifs_info *c, void *node, int len, int last); +int ubifs_io_init(struct ubifs_info *c); +void ubifs_pad(const struct ubifs_info *c, void *buf, int pad); +int ubifs_wbuf_sync_nolock(struct ubifs_wbuf *wbuf); +int ubifs_bg_wbufs_sync(struct ubifs_info *c); +void ubifs_wbuf_add_ino_nolock(struct ubifs_wbuf *wbuf, ino_t inum); +int ubifs_sync_wbufs_by_inode(struct ubifs_info *c, struct inode *inode); + +/* scan.c */ +struct ubifs_scan_leb *ubifs_scan(const struct ubifs_info *c, int lnum, + int offs, void *sbuf); +void ubifs_scan_destroy(struct ubifs_scan_leb *sleb); +int ubifs_scan_a_node(const struct ubifs_info *c, void *buf, int len, int lnum, + int offs, int quiet); +struct ubifs_scan_leb *ubifs_start_scan(const struct ubifs_info *c, int lnum, + int offs, void *sbuf); +void ubifs_end_scan(const struct ubifs_info *c, struct ubifs_scan_leb *sleb, + int lnum, int offs); +int ubifs_add_snod(const struct ubifs_info *c, struct ubifs_scan_leb *sleb, + void *buf, int offs); +void ubifs_scanned_corruption(const struct ubifs_info *c, int lnum, int offs, + void *buf); + +/* log.c */ +void ubifs_add_bud(struct ubifs_info *c, struct ubifs_bud *bud); +void ubifs_create_buds_lists(struct ubifs_info *c); +int ubifs_add_bud_to_log(struct ubifs_info *c, int jhead, int lnum, int offs); +struct ubifs_bud *ubifs_search_bud(struct ubifs_info *c, int lnum); +struct ubifs_wbuf *ubifs_get_wbuf(struct ubifs_info *c, int lnum); +int ubifs_log_start_commit(struct ubifs_info *c, int *ltail_lnum); +int ubifs_log_end_commit(struct ubifs_info *c, int new_ltail_lnum); +int ubifs_log_post_commit(struct ubifs_info *c, int old_ltail_lnum); +int ubifs_consolidate_log(struct ubifs_info *c); + +/* journal.c */ +int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir, + const struct qstr *nm, const struct inode *inode, + int deletion, int xent); +int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode, + const union ubifs_key *key, const void *buf, int len); +int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode, + int last_reference); +int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir, + const struct dentry *old_dentry, + const struct inode *new_dir, + const struct dentry *new_dentry, int sync); +int ubifs_jnl_truncate(struct ubifs_info *c, const struct inode *inode, + loff_t old_size, loff_t new_size); +int ubifs_jnl_delete_xattr(struct ubifs_info *c, const struct inode *host, + const struct inode *inode, const struct qstr *nm); +int ubifs_jnl_change_xattr(struct ubifs_info *c, const struct inode *inode1, + const struct inode *inode2); + +/* budget.c */ +int ubifs_budget_space(struct ubifs_info *c, struct ubifs_budget_req *req); +void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req); +void ubifs_release_dirty_inode_budget(struct ubifs_info *c, + struct ubifs_inode *ui); +int ubifs_budget_inode_op(struct ubifs_info *c, struct inode *inode, + struct ubifs_budget_req *req); +void ubifs_release_ino_dirty(struct ubifs_info *c, struct inode *inode, + struct ubifs_budget_req *req); +void ubifs_cancel_ino_op(struct ubifs_info *c, struct inode *inode, + struct ubifs_budget_req *req); +long long ubifs_budg_get_free_space(struct ubifs_info *c); +int ubifs_calc_min_idx_lebs(struct ubifs_info *c); +void ubifs_convert_page_budget(struct ubifs_info *c); +long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs); + +/* find.c */ +int ubifs_find_free_space(struct ubifs_info *c, int min_space, int *free, + int squeeze); +int ubifs_find_free_leb_for_idx(struct ubifs_info *c); +int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp, + int min_space, int pick_free); +int ubifs_find_dirty_idx_leb(struct ubifs_info *c); +int ubifs_save_dirty_idx_lnums(struct ubifs_info *c); + +/* tnc.c */ +int ubifs_lookup_level0(struct ubifs_info *c, const union ubifs_key *key, + struct ubifs_znode **zn, int *n); +int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key, + void *node); +int ubifs_tnc_lookup_nm(struct ubifs_info *c, const union ubifs_key *key, + void *node, const struct qstr *nm); +int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key, + void *node, int *lnum, int *offs); +int ubifs_tnc_add(struct ubifs_info *c, const union ubifs_key *key, int lnum, + int offs, int len); +int ubifs_tnc_replace(struct ubifs_info *c, const union ubifs_key *key, + int old_lnum, int old_offs, int lnum, int offs, int len); +int ubifs_tnc_add_nm(struct ubifs_info *c, const union ubifs_key *key, + int lnum, int offs, int len, const struct qstr *nm); +int ubifs_tnc_remove(struct ubifs_info *c, const union ubifs_key *key); +int ubifs_tnc_remove_nm(struct ubifs_info *c, const union ubifs_key *key, + const struct qstr *nm); +int ubifs_tnc_remove_range(struct ubifs_info *c, union ubifs_key *from_key, + union ubifs_key *to_key); +int ubifs_tnc_remove_ino(struct ubifs_info *c, ino_t inum); +struct ubifs_dent_node *ubifs_tnc_next_ent(struct ubifs_info *c, + union ubifs_key *key, + const struct qstr *nm); +void ubifs_tnc_close(struct ubifs_info *c); +int ubifs_tnc_has_node(struct ubifs_info *c, union ubifs_key *key, int level, + int lnum, int offs, int is_idx); +int ubifs_dirty_idx_node(struct ubifs_info *c, union ubifs_key *key, int level, + int lnum, int offs); +/* Shared by tnc.c for tnc_commit.c */ +void destroy_old_idx(struct ubifs_info *c); +int is_idx_node_in_tnc(struct ubifs_info *c, union ubifs_key *key, int level, + int lnum, int offs); +int insert_old_idx_znode(struct ubifs_info *c, struct ubifs_znode *znode); + +/* tnc_misc.c */ +struct ubifs_znode *ubifs_tnc_levelorder_next(struct ubifs_znode *zr, + struct ubifs_znode *znode); +int ubifs_search_zbranch(const struct ubifs_info *c, + const struct ubifs_znode *znode, + const union ubifs_key *key, int *n); +struct ubifs_znode *ubifs_tnc_postorder_first(struct ubifs_znode *znode); +struct ubifs_znode *ubifs_tnc_postorder_next(struct ubifs_znode *znode); +long ubifs_destroy_tnc_subtree(struct ubifs_znode *zr); +struct ubifs_znode *ubifs_load_znode(struct ubifs_info *c, + struct ubifs_zbranch *zbr, + struct ubifs_znode *parent, int iip); +int ubifs_tnc_read_node(struct ubifs_info *c, struct ubifs_zbranch *zbr, + void *node); + +/* tnc_commit.c */ +int ubifs_tnc_start_commit(struct ubifs_info *c, struct ubifs_zbranch *zroot); +int ubifs_tnc_end_commit(struct ubifs_info *c); + +/* shrinker.c */ +int ubifs_shrinker(int nr_to_scan, gfp_t gfp_mask); + +/* commit.c */ +int ubifs_bg_thread(void *info); +void ubifs_commit_required(struct ubifs_info *c); +void ubifs_request_bg_commit(struct ubifs_info *c); +int ubifs_run_commit(struct ubifs_info *c); +void ubifs_recovery_commit(struct ubifs_info *c); +int ubifs_gc_should_commit(struct ubifs_info *c); +void ubifs_wait_for_commit(struct ubifs_info *c); + +/* master.c */ +int ubifs_read_master(struct ubifs_info *c); +int ubifs_write_master(struct ubifs_info *c); + +/* sb.c */ +int ubifs_read_superblock(struct ubifs_info *c); +struct ubifs_sb_node *ubifs_read_sb_node(struct ubifs_info *c); +int ubifs_write_sb_node(struct ubifs_info *c, struct ubifs_sb_node *sup); + +/* replay.c */ +int ubifs_validate_entry(struct ubifs_info *c, + const struct ubifs_dent_node *dent); +int ubifs_replay_journal(struct ubifs_info *c); + +/* gc.c */ +int ubifs_garbage_collect(struct ubifs_info *c, int anyway); +int ubifs_gc_start_commit(struct ubifs_info *c); +int ubifs_gc_end_commit(struct ubifs_info *c); +void ubifs_destroy_idx_gc(struct ubifs_info *c); +int ubifs_get_idx_gc_leb(struct ubifs_info *c); +int ubifs_garbage_collect_leb(struct ubifs_info *c, struct ubifs_lprops *lp); + +/* orphan.c */ +int ubifs_add_orphan(struct ubifs_info *c, ino_t inum); +void ubifs_delete_orphan(struct ubifs_info *c, ino_t inum); +int ubifs_orphan_start_commit(struct ubifs_info *c); +int ubifs_orphan_end_commit(struct ubifs_info *c); +int ubifs_mount_orphans(struct ubifs_info *c, int unclean, int read_only); + +/* lpt.c */ +int ubifs_calc_lpt_geom(struct ubifs_info *c); +int ubifs_create_dflt_lpt(struct ubifs_info *c, int *main_lebs, int lpt_first, + int *lpt_lebs, int *big_lpt); +int ubifs_lpt_init(struct ubifs_info *c, int rd, int wr); +struct ubifs_lprops *ubifs_lpt_lookup(struct ubifs_info *c, int lnum); +struct ubifs_lprops *ubifs_lpt_lookup_dirty(struct ubifs_info *c, int lnum); +int ubifs_lpt_scan_nolock(struct ubifs_info *c, int start_lnum, int end_lnum, + ubifs_lpt_scan_callback scan_cb, void *data); + +/* Shared by lpt.c for lpt_commit.c */ +void ubifs_pack_lsave(struct ubifs_info *c, void *buf, int *lsave); +void ubifs_pack_ltab(struct ubifs_info *c, void *buf, + struct ubifs_lpt_lprops *ltab); +void ubifs_pack_pnode(struct ubifs_info *c, void *buf, + struct ubifs_pnode *pnode); +void ubifs_pack_nnode(struct ubifs_info *c, void *buf, + struct ubifs_nnode *nnode); +struct ubifs_pnode *ubifs_get_pnode(struct ubifs_info *c, + struct ubifs_nnode *parent, int iip); +struct ubifs_nnode *ubifs_get_nnode(struct ubifs_info *c, + struct ubifs_nnode *parent, int iip); +int ubifs_read_nnode(struct ubifs_info *c, struct ubifs_nnode *parent, int iip); +void ubifs_add_lpt_dirt(struct ubifs_info *c, int lnum, int dirty); +void ubifs_add_nnode_dirt(struct ubifs_info *c, struct ubifs_nnode *nnode); +uint32_t ubifs_unpack_bits(uint8_t **addr, int *pos, int nrbits); +struct ubifs_nnode *ubifs_first_nnode(struct ubifs_info *c, int *hght); + +/* lpt_commit.c */ +int ubifs_lpt_start_commit(struct ubifs_info *c); +int ubifs_lpt_end_commit(struct ubifs_info *c); +int ubifs_lpt_post_commit(struct ubifs_info *c); +void ubifs_lpt_free(struct ubifs_info *c, int wr_only); + +/* lprops.c */ +void ubifs_get_lprops(struct ubifs_info *c); +const struct ubifs_lprops *ubifs_change_lp(struct ubifs_info *c, + const struct ubifs_lprops *lp, + int free, int dirty, int flags, + int idx_gc_cnt); +void ubifs_release_lprops(struct ubifs_info *c); +void ubifs_get_lp_stats(struct ubifs_info *c, struct ubifs_lp_stats *stats); +void ubifs_add_to_cat(struct ubifs_info *c, struct ubifs_lprops *lprops, + int cat); +void ubifs_replace_cat(struct ubifs_info *c, struct ubifs_lprops *old_lprops, + struct ubifs_lprops *new_lprops); +void ubifs_ensure_cat(struct ubifs_info *c, struct ubifs_lprops *lprops); +int ubifs_categorize_lprops(const struct ubifs_info *c, + const struct ubifs_lprops *lprops); +int ubifs_change_one_lp(struct ubifs_info *c, int lnum, int free, int dirty, + int flags_set, int flags_clean, int idx_gc_cnt); +int ubifs_update_one_lp(struct ubifs_info *c, int lnum, int free, int dirty, + int flags_set, int flags_clean); +int ubifs_read_one_lp(struct ubifs_info *c, int lnum, struct ubifs_lprops *lp); +const struct ubifs_lprops *ubifs_fast_find_free(struct ubifs_info *c); +const struct ubifs_lprops *ubifs_fast_find_empty(struct ubifs_info *c); +const struct ubifs_lprops *ubifs_fast_find_freeable(struct ubifs_info *c); +const struct ubifs_lprops *ubifs_fast_find_frdi_idx(struct ubifs_info *c); + +/* file.c */ +int ubifs_fsync(struct file *file, struct dentry *dentry, int datasync); +int ubifs_setattr(struct dentry *dentry, struct iattr *attr); + +/* dir.c */ +struct inode *ubifs_new_inode(struct ubifs_info *c, const struct inode *dir, + int mode); +int ubifs_getattr(struct vfsmount *mnt, struct dentry *dentry, + struct kstat *stat); + +/* xattr.c */ +int ubifs_setxattr(struct dentry *dentry, const char *name, + const void *value, size_t size, int flags); +ssize_t ubifs_getxattr(struct dentry *dentry, const char *name, void *buf, + size_t size); +ssize_t ubifs_listxattr(struct dentry *dentry, char *buffer, size_t size); +int ubifs_removexattr(struct dentry *dentry, const char *name); + +/* super.c */ +struct inode *ubifs_iget(struct super_block *sb, unsigned long inum); + +/* recovery.c */ +int ubifs_recover_master_node(struct ubifs_info *c); +int ubifs_write_rcvrd_mst_node(struct ubifs_info *c); +struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum, + int offs, void *sbuf, int grouped); +struct ubifs_scan_leb *ubifs_recover_log_leb(struct ubifs_info *c, int lnum, + int offs, void *sbuf); +int ubifs_recover_inl_heads(const struct ubifs_info *c, void *sbuf); +int ubifs_clean_lebs(const struct ubifs_info *c, void *sbuf); +int ubifs_rcvry_gc_commit(struct ubifs_info *c); +int ubifs_recover_size_accum(struct ubifs_info *c, union ubifs_key *key, + int deletion, loff_t new_size); +int ubifs_recover_size(struct ubifs_info *c); +void ubifs_destroy_size_tree(struct ubifs_info *c); + +/* ioctl.c */ +long ubifs_ioctl(struct file *file, unsigned int cmd, unsigned long arg); +void ubifs_set_inode_flags(struct inode *inode); +#ifdef CONFIG_COMPAT +long ubifs_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg); +#endif + +/* compressor.c */ +int __init ubifs_compressors_init(void); +void __exit ubifs_compressors_exit(void); +void ubifs_compress(const void *in_buf, int in_len, void *out_buf, int *out_len, + int *compr_type); +int ubifs_decompress(const void *buf, int len, void *out, int *out_len, + int compr_type); + +#include "debug.h" +#include "misc.h" +#include "key.h" + +#endif /* !__UBIFS_H__ */ diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c new file mode 100644 index 000000000000..1388a078e1a9 --- /dev/null +++ b/fs/ubifs/xattr.c @@ -0,0 +1,581 @@ +/* + * This file is part of UBIFS. + * + * Copyright (C) 2006-2008 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 51 + * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Adrian Hunter + */ + +/* + * This file implements UBIFS extended attributes support. + * + * Extended attributes are implemented as regular inodes with attached data, + * which limits extended attribute size to UBIFS block size (4KiB). Names of + * extended attributes are described by extended attribute entries (xentries), + * which are almost identical to directory entries, but have different key type. + * + * In other words, the situation with extended attributes is very similar to + * directories. Indeed, any inode (but of course not xattr inodes) may have a + * number of associated xentries, just like directory inodes have associated + * directory entries. Extended attribute entries store the name of the extended + * attribute, the host inode number, and the extended attribute inode number. + * Similarly, direntries store the name, the parent and the target inode + * numbers. Thus, most of the common UBIFS mechanisms may be re-used for + * extended attributes. + * + * The number of extended attributes is not limited, but there is Linux + * limitation on the maximum possible size of the list of all extended + * attributes associated with an inode (%XATTR_LIST_MAX), so UBIFS makes sure + * the sum of all extended attribute names of the inode does not exceed that + * limit. + * + * Extended attributes are synchronous, which means they are written to the + * flash media synchronously and there is no write-back for extended attribute + * inodes. The extended attribute values are not stored in compressed form on + * the media. + * + * Since extended attributes are represented by regular inodes, they are cached + * in the VFS inode cache. The xentries are cached in the LNC cache (see + * tnc.c). + * + * ACL support is not implemented. + */ + +#include +#include +#include "ubifs.h" + +/* + * Limit the number of extended attributes per inode so that the total size + * (xattr_size) is guaranteeded to fit in an 'unsigned int'. + */ +#define MAX_XATTRS_PER_INODE 65535 + +/* + * Extended attribute type constants. + * + * USER_XATTR: user extended attribute ("user.*") + * TRUSTED_XATTR: trusted extended attribute ("trusted.*) + * SECURITY_XATTR: security extended attribute ("security.*") + */ +enum { + USER_XATTR, + TRUSTED_XATTR, + SECURITY_XATTR, +}; + +static struct inode_operations none_inode_operations; +static struct address_space_operations none_address_operations; +static struct file_operations none_file_operations; + +/** + * create_xattr - create an extended attribute. + * @c: UBIFS file-system description object + * @host: host inode + * @nm: extended attribute name + * @value: extended attribute value + * @size: size of extended attribute value + * + * This is a helper function which creates an extended attribute of name @nm + * and value @value for inode @host. The host inode is also updated on flash + * because the ctime and extended attribute accounting data changes. This + * function returns zero in case of success and a negative error code in case + * of failure. + */ +static int create_xattr(struct ubifs_info *c, struct inode *host, + const struct qstr *nm, const void *value, int size) +{ + int err; + struct inode *inode; + struct ubifs_inode *ui, *host_ui = ubifs_inode(host); + struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1, + .new_ino_d = size, .dirtied_ino = 1, + .dirtied_ino_d = host_ui->data_len}; + + if (host_ui->xattr_cnt >= MAX_XATTRS_PER_INODE) + return -ENOSPC; + /* + * Linux limits the maximum size of the extended attribute names list + * to %XATTR_LIST_MAX. This means we should not allow creating more* + * extended attributes if the name list becomes larger. This limitation + * is artificial for UBIFS, though. + */ + if (host_ui->xattr_names + host_ui->xattr_cnt + + nm->len + 1 > XATTR_LIST_MAX) + return -ENOSPC; + + err = ubifs_budget_space(c, &req); + if (err) + return err; + + inode = ubifs_new_inode(c, host, S_IFREG | S_IRWXUGO); + if (IS_ERR(inode)) { + err = PTR_ERR(inode); + goto out_budg; + } + + mutex_lock(&host_ui->ui_mutex); + /* Re-define all operations to be "nothing" */ + inode->i_mapping->a_ops = &none_address_operations; + inode->i_op = &none_inode_operations; + inode->i_fop = &none_file_operations; + + inode->i_flags |= S_SYNC | S_NOATIME | S_NOCMTIME | S_NOQUOTA; + ui = ubifs_inode(inode); + ui->xattr = 1; + ui->flags |= UBIFS_XATTR_FL; + ui->data = kmalloc(size, GFP_NOFS); + if (!ui->data) { + err = -ENOMEM; + goto out_unlock; + } + + memcpy(ui->data, value, size); + host->i_ctime = ubifs_current_time(host); + host_ui->xattr_cnt += 1; + host_ui->xattr_size += CALC_DENT_SIZE(nm->len); + host_ui->xattr_size += CALC_XATTR_BYTES(size); + host_ui->xattr_names += nm->len; + + /* + * We do not use i_size_write() because nobody can race with us as we + * are holding host @host->i_mutex - every xattr operation for this + * inode is serialized by it. + */ + inode->i_size = ui->ui_size = size; + ui->data_len = size; + err = ubifs_jnl_update(c, host, nm, inode, 0, 1); + if (err) + goto out_cancel; + mutex_unlock(&host_ui->ui_mutex); + + ubifs_release_budget(c, &req); + insert_inode_hash(inode); + iput(inode); + return 0; + +out_cancel: + host_ui->xattr_cnt -= 1; + host_ui->xattr_size -= CALC_DENT_SIZE(nm->len); + host_ui->xattr_size -= CALC_XATTR_BYTES(size); +out_unlock: + mutex_unlock(&host_ui->ui_mutex); + make_bad_inode(inode); + iput(inode); +out_budg: + ubifs_release_budget(c, &req); + return err; +} + +/** + * change_xattr - change an extended attribute. + * @c: UBIFS file-system description object + * @host: host inode + * @inode: extended attribute inode + * @value: extended attribute value + * @size: size of extended attribute value + * + * This helper function changes the value of extended attribute @inode with new + * data from @value. Returns zero in case of success and a negative error code + * in case of failure. + */ +static int change_xattr(struct ubifs_info *c, struct inode *host, + struct inode *inode, const void *value, int size) +{ + int err; + struct ubifs_inode *host_ui = ubifs_inode(host); + struct ubifs_inode *ui = ubifs_inode(inode); + struct ubifs_budget_req req = { .dirtied_ino = 2, + .dirtied_ino_d = size + host_ui->data_len }; + + ubifs_assert(ui->data_len == inode->i_size); + err = ubifs_budget_space(c, &req); + if (err) + return err; + + mutex_lock(&host_ui->ui_mutex); + host->i_ctime = ubifs_current_time(host); + host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len); + host_ui->xattr_size += CALC_XATTR_BYTES(size); + + kfree(ui->data); + ui->data = kmalloc(size, GFP_NOFS); + if (!ui->data) { + err = -ENOMEM; + goto out_unlock; + } + + memcpy(ui->data, value, size); + inode->i_size = ui->ui_size = size; + ui->data_len = size; + + /* + * It is important to write the host inode after the xattr inode + * because if the host inode gets synchronized (via 'fsync()'), then + * the extended attribute inode gets synchronized, because it goes + * before the host inode in the write-buffer. + */ + err = ubifs_jnl_change_xattr(c, inode, host); + if (err) + goto out_cancel; + mutex_unlock(&host_ui->ui_mutex); + + ubifs_release_budget(c, &req); + return 0; + +out_cancel: + host_ui->xattr_size -= CALC_XATTR_BYTES(size); + host_ui->xattr_size += CALC_XATTR_BYTES(ui->data_len); + make_bad_inode(inode); +out_unlock: + mutex_unlock(&host_ui->ui_mutex); + ubifs_release_budget(c, &req); + return err; +} + +/** + * check_namespace - check extended attribute name-space. + * @nm: extended attribute name + * + * This function makes sure the extended attribute name belongs to one of the + * supported extended attribute name-spaces. Returns name-space index in case + * of success and a negative error code in case of failure. + */ +static int check_namespace(const struct qstr *nm) +{ + int type; + + if (nm->len > UBIFS_MAX_NLEN) + return -ENAMETOOLONG; + + if (!strncmp(nm->name, XATTR_TRUSTED_PREFIX, + XATTR_TRUSTED_PREFIX_LEN)) { + if (nm->name[sizeof(XATTR_TRUSTED_PREFIX) - 1] == '\0') + return -EINVAL; + type = TRUSTED_XATTR; + } else if (!strncmp(nm->name, XATTR_USER_PREFIX, + XATTR_USER_PREFIX_LEN)) { + if (nm->name[XATTR_USER_PREFIX_LEN] == '\0') + return -EINVAL; + type = USER_XATTR; + } else if (!strncmp(nm->name, XATTR_SECURITY_PREFIX, + XATTR_SECURITY_PREFIX_LEN)) { + if (nm->name[sizeof(XATTR_SECURITY_PREFIX) - 1] == '\0') + return -EINVAL; + type = SECURITY_XATTR; + } else + return -EOPNOTSUPP; + + return type; +} + +static struct inode *iget_xattr(struct ubifs_info *c, ino_t inum) +{ + struct inode *inode; + + inode = ubifs_iget(c->vfs_sb, inum); + if (IS_ERR(inode)) { + ubifs_err("dead extended attribute entry, error %d", + (int)PTR_ERR(inode)); + return inode; + } + if (ubifs_inode(inode)->xattr) + return inode; + ubifs_err("corrupt extended attribute entry"); + iput(inode); + return ERR_PTR(-EINVAL); +} + +int ubifs_setxattr(struct dentry *dentry, const char *name, + const void *value, size_t size, int flags) +{ + struct inode *inode, *host = dentry->d_inode; + struct ubifs_info *c = host->i_sb->s_fs_info; + struct qstr nm = { .name = name, .len = strlen(name) }; + struct ubifs_dent_node *xent; + union ubifs_key key; + int err, type; + + dbg_gen("xattr '%s', host ino %lu ('%.*s'), size %zd", name, + host->i_ino, dentry->d_name.len, dentry->d_name.name, size); + + if (size > UBIFS_MAX_INO_DATA) + return -ERANGE; + + type = check_namespace(&nm); + if (type < 0) + return type; + + xent = kmalloc(UBIFS_MAX_XENT_NODE_SZ, GFP_NOFS); + if (!xent) + return -ENOMEM; + + /* + * The extended attribute entries are stored in LNC, so multiple + * look-ups do not involve reading the flash. + */ + xent_key_init(c, &key, host->i_ino, &nm); + err = ubifs_tnc_lookup_nm(c, &key, xent, &nm); + if (err) { + if (err != -ENOENT) + goto out_free; + + if (flags & XATTR_REPLACE) + /* We are asked not to create the xattr */ + err = -ENODATA; + else + err = create_xattr(c, host, &nm, value, size); + goto out_free; + } + + if (flags & XATTR_CREATE) { + /* We are asked not to replace the xattr */ + err = -EEXIST; + goto out_free; + } + + inode = iget_xattr(c, le64_to_cpu(xent->inum)); + if (IS_ERR(inode)) { + err = PTR_ERR(inode); + goto out_free; + } + + err = change_xattr(c, host, inode, value, size); + iput(inode); + +out_free: + kfree(xent); + return err; +} + +ssize_t ubifs_getxattr(struct dentry *dentry, const char *name, void *buf, + size_t size) +{ + struct inode *inode, *host = dentry->d_inode; + struct ubifs_info *c = host->i_sb->s_fs_info; + struct qstr nm = { .name = name, .len = strlen(name) }; + struct ubifs_inode *ui; + struct ubifs_dent_node *xent; + union ubifs_key key; + int err; + + dbg_gen("xattr '%s', ino %lu ('%.*s'), buf size %zd", name, + host->i_ino, dentry->d_name.len, dentry->d_name.name, size); + + err = check_namespace(&nm); + if (err < 0) + return err; + + xent = kmalloc(UBIFS_MAX_XENT_NODE_SZ, GFP_NOFS); + if (!xent) + return -ENOMEM; + + mutex_lock(&host->i_mutex); + xent_key_init(c, &key, host->i_ino, &nm); + err = ubifs_tnc_lookup_nm(c, &key, xent, &nm); + if (err) { + if (err == -ENOENT) + err = -ENODATA; + goto out_unlock; + } + + inode = iget_xattr(c, le64_to_cpu(xent->inum)); + if (IS_ERR(inode)) { + err = PTR_ERR(inode); + goto out_unlock; + } + + ui = ubifs_inode(inode); + ubifs_assert(inode->i_size == ui->data_len); + ubifs_assert(ubifs_inode(host)->xattr_size > ui->data_len); + + if (buf) { + /* If @buf is %NULL we are supposed to return the length */ + if (ui->data_len > size) { + dbg_err("buffer size %zd, xattr len %d", + size, ui->data_len); + err = -ERANGE; + goto out_iput; + } + + memcpy(buf, ui->data, ui->data_len); + } + err = ui->data_len; + +out_iput: + iput(inode); +out_unlock: + mutex_unlock(&host->i_mutex); + kfree(xent); + return err; +} + +ssize_t ubifs_listxattr(struct dentry *dentry, char *buffer, size_t size) +{ + union ubifs_key key; + struct inode *host = dentry->d_inode; + struct ubifs_info *c = host->i_sb->s_fs_info; + struct ubifs_inode *host_ui = ubifs_inode(host); + struct ubifs_dent_node *xent, *pxent = NULL; + int err, len, written = 0; + struct qstr nm = { .name = NULL }; + + dbg_gen("ino %lu ('%.*s'), buffer size %zd", host->i_ino, + dentry->d_name.len, dentry->d_name.name, size); + + len = host_ui->xattr_names + host_ui->xattr_cnt; + if (!buffer) + /* + * We should return the minimum buffer size which will fit a + * null-terminated list of all the extended attribute names. + */ + return len; + + if (len > size) + return -ERANGE; + + lowest_xent_key(c, &key, host->i_ino); + + mutex_lock(&host->i_mutex); + while (1) { + int type; + + xent = ubifs_tnc_next_ent(c, &key, &nm); + if (unlikely(IS_ERR(xent))) { + err = PTR_ERR(xent); + break; + } + + nm.name = xent->name; + nm.len = le16_to_cpu(xent->nlen); + + type = check_namespace(&nm); + if (unlikely(type < 0)) { + err = type; + break; + } + + /* Show trusted namespace only for "power" users */ + if (type != TRUSTED_XATTR || capable(CAP_SYS_ADMIN)) { + memcpy(buffer + written, nm.name, nm.len + 1); + written += nm.len + 1; + } + + kfree(pxent); + pxent = xent; + key_read(c, &xent->key, &key); + } + mutex_unlock(&host->i_mutex); + + kfree(pxent); + if (err != -ENOENT) { + ubifs_err("cannot find next direntry, error %d", err); + return err; + } + + ubifs_assert(written <= size); + return written; +} + +static int remove_xattr(struct ubifs_info *c, struct inode *host, + struct inode *inode, const struct qstr *nm) +{ + int err; + struct ubifs_inode *host_ui = ubifs_inode(host); + struct ubifs_inode *ui = ubifs_inode(inode); + struct ubifs_budget_req req = { .dirtied_ino = 1, .mod_dent = 1, + .dirtied_ino_d = host_ui->data_len }; + + ubifs_assert(ui->data_len == inode->i_size); + + err = ubifs_budget_space(c, &req); + if (err) + return err; + + mutex_lock(&host_ui->ui_mutex); + host->i_ctime = ubifs_current_time(host); + host_ui->xattr_cnt -= 1; + host_ui->xattr_size -= CALC_DENT_SIZE(nm->len); + host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len); + host_ui->xattr_names -= nm->len; + + err = ubifs_jnl_delete_xattr(c, host, inode, nm); + if (err) + goto out_cancel; + mutex_unlock(&host_ui->ui_mutex); + + ubifs_release_budget(c, &req); + return 0; + +out_cancel: + host_ui->xattr_cnt += 1; + host_ui->xattr_size += CALC_DENT_SIZE(nm->len); + host_ui->xattr_size += CALC_XATTR_BYTES(ui->data_len); + mutex_unlock(&host_ui->ui_mutex); + ubifs_release_budget(c, &req); + make_bad_inode(inode); + return err; +} + +int ubifs_removexattr(struct dentry *dentry, const char *name) +{ + struct inode *inode, *host = dentry->d_inode; + struct ubifs_info *c = host->i_sb->s_fs_info; + struct qstr nm = { .name = name, .len = strlen(name) }; + struct ubifs_dent_node *xent; + union ubifs_key key; + int err; + + dbg_gen("xattr '%s', ino %lu ('%.*s')", name, + host->i_ino, dentry->d_name.len, dentry->d_name.name); + ubifs_assert(mutex_is_locked(&host->i_mutex)); + + err = check_namespace(&nm); + if (err < 0) + return err; + + xent = kmalloc(UBIFS_MAX_XENT_NODE_SZ, GFP_NOFS); + if (!xent) + return -ENOMEM; + + xent_key_init(c, &key, host->i_ino, &nm); + err = ubifs_tnc_lookup_nm(c, &key, xent, &nm); + if (err) { + if (err == -ENOENT) + err = -ENODATA; + goto out_free; + } + + inode = iget_xattr(c, le64_to_cpu(xent->inum)); + if (IS_ERR(inode)) { + err = PTR_ERR(inode); + goto out_free; + } + + ubifs_assert(inode->i_nlink == 1); + inode->i_nlink = 0; + err = remove_xattr(c, host, inode, &nm); + if (err) + inode->i_nlink = 1; + + /* If @i_nlink is 0, 'iput()' will delete the inode */ + iput(inode); + +out_free: + kfree(xent); + return err; +} -- cgit v1.2.3 From 0d7eff873caaeac84de01a1acdca983d2c7ba3fe Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 14 Jul 2008 19:08:38 +0300 Subject: UBIFS: include to compilation Add UBIFS to Makefile and Kbuild. Signed-off-by: Artem Bityutskiy Signed-off-by: Adrian Hunter --- fs/Kconfig | 3 +++ fs/Makefile | 1 + fs/ubifs/Kconfig | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ fs/ubifs/Makefile | 9 +++++++ 4 files changed, 85 insertions(+) create mode 100644 fs/ubifs/Kconfig create mode 100644 fs/ubifs/Makefile diff --git a/fs/Kconfig b/fs/Kconfig index 2694648cbd1b..a52cf6280b4b 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1375,6 +1375,9 @@ config JFFS2_CMODE_FAVOURLZO endchoice +# UBIFS File system configuration +source "fs/ubifs/Kconfig" + config CRAMFS tristate "Compressed ROM file system support (cramfs)" depends on BLOCK diff --git a/fs/Makefile b/fs/Makefile index 1e7a11bd4da1..fcae06aaadc5 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -100,6 +100,7 @@ obj-$(CONFIG_NTFS_FS) += ntfs/ obj-$(CONFIG_UFS_FS) += ufs/ obj-$(CONFIG_EFS_FS) += efs/ obj-$(CONFIG_JFFS2_FS) += jffs2/ +obj-$(CONFIG_UBIFS_FS) += ubifs/ obj-$(CONFIG_AFFS_FS) += affs/ obj-$(CONFIG_ROMFS_FS) += romfs/ obj-$(CONFIG_QNX4FS_FS) += qnx4/ diff --git a/fs/ubifs/Kconfig b/fs/ubifs/Kconfig new file mode 100644 index 000000000000..91ceeda7e5bf --- /dev/null +++ b/fs/ubifs/Kconfig @@ -0,0 +1,72 @@ +config UBIFS_FS + tristate "UBIFS file system support" + select CRC16 + select CRC32 + select CRYPTO if UBIFS_FS_ADVANCED_COMPR + select CRYPTO if UBIFS_FS_LZO + select CRYPTO if UBIFS_FS_ZLIB + select CRYPTO_LZO if UBIFS_FS_LZO + select CRYPTO_DEFLATE if UBIFS_FS_ZLIB + depends on MTD_UBI + help + UBIFS is a file system for flash devices which works on top of UBI. + +config UBIFS_FS_XATTR + bool "Extended attributes support" + depends on UBIFS_FS + help + This option enables support of extended attributes. + +config UBIFS_FS_ADVANCED_COMPR + bool "Advanced compression options" + depends on UBIFS_FS + help + This option allows to explicitly choose which compressions, if any, + are enabled in UBIFS. Removing compressors means inbility to read + existing file systems. + + If unsure, say 'N'. + +config UBIFS_FS_LZO + bool "LZO compression support" if UBIFS_FS_ADVANCED_COMPR + depends on UBIFS_FS + default y + help + LZO compressor is generally faster then zlib but compresses worse. + Say 'Y' if unsure. + +config UBIFS_FS_ZLIB + bool "ZLIB compression support" if UBIFS_FS_ADVANCED_COMPR + depends on UBIFS_FS + default y + help + Zlib copresses better then LZO but it is slower. Say 'Y' if unsure. + +# Debugging-related stuff +config UBIFS_FS_DEBUG + bool "Enable debugging" + depends on UBIFS_FS + select DEBUG_FS + select KALLSYMS_ALL + help + This option enables UBIFS debugging. + +config UBIFS_FS_DEBUG_MSG_LVL + int "Default message level (0 = no extra messages, 3 = lots)" + depends on UBIFS_FS_DEBUG + default "0" + help + This controls the amount of debugging messages produced by UBIFS. + If reporting bugs, please try to have available a full dump of the + messages at level 1 while the misbehaviour was occurring. Level 2 + may become necessary if level 1 messages were not enough to find the + bug. Generally Level 3 should be avoided. + +config UBIFS_FS_DEBUG_CHKS + bool "Enable extra checks" + depends on UBIFS_FS_DEBUG + help + If extra checks are enabled UBIFS will check the consistency of its + internal data structures during operation. However, UBIFS performance + is dramatically slower when this option is selected especially if the + file system is large. diff --git a/fs/ubifs/Makefile b/fs/ubifs/Makefile new file mode 100644 index 000000000000..80e93c35e496 --- /dev/null +++ b/fs/ubifs/Makefile @@ -0,0 +1,9 @@ +obj-$(CONFIG_UBIFS_FS) += ubifs.o + +ubifs-y += shrinker.o journal.o file.o dir.o super.o sb.o io.o +ubifs-y += tnc.o master.o scan.o replay.o log.o commit.o gc.o orphan.o +ubifs-y += budget.o find.o tnc_commit.o compress.o lpt.o lprops.o +ubifs-y += recovery.o ioctl.o lpt_commit.o tnc_misc.o + +ubifs-$(CONFIG_UBIFS_FS_DEBUG) += debug.o +ubifs-$(CONFIG_UBIFS_FS_XATTR) += xattr.o -- cgit v1.2.3 From 7890ea1f95fa8968fa6f5bb5860e6632932abfd3 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 15 Jul 2008 23:46:24 +0800 Subject: Revert crypto: prng - Deterministic CPRNG This patch is clearly not ready yet for prime time. Signed-off-by: Herbert Xu --- crypto/Kconfig | 9 -- crypto/Makefile | 2 +- crypto/prng.c | 410 -------------------------------------------------------- crypto/prng.h | 27 ---- 4 files changed, 1 insertion(+), 447 deletions(-) delete mode 100644 crypto/prng.c delete mode 100644 crypto/prng.h diff --git a/crypto/Kconfig b/crypto/Kconfig index ea503572fcbe..d83185915eee 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -666,15 +666,6 @@ config CRYPTO_LZO help This is the LZO algorithm. -comment "Random Number Generation" - -config CRYPTO_PRNG - tristate "Pseudo Random Number Generation for Cryptographic modules" - help - This option enables the generic pseudo random number generator - for cryptographic modules. Uses the Algorithm specified in - ANSI X9.31 A.2.4 - source "drivers/crypto/Kconfig" endif # if CRYPTO diff --git a/crypto/Makefile b/crypto/Makefile index ef61b3b64660..d4f3ed857df0 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -69,7 +69,7 @@ obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += michael_mic.o obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o obj-$(CONFIG_CRYPTO_LZO) += lzo.o -obj-$(CONFIG_CRYPTO_PRNG) += prng.o + obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o # diff --git a/crypto/prng.c b/crypto/prng.c deleted file mode 100644 index 24e4f3282c56..000000000000 --- a/crypto/prng.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * PRNG: Pseudo Random Number Generator - * Based on NIST Recommended PRNG From ANSI X9.31 Appendix A.2.4 using - * AES 128 cipher in RFC3686 ctr mode - * - * (C) Neil Horman - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * any later version. - * - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "prng.h" - -#define TEST_PRNG_ON_START 0 - -#define DEFAULT_PRNG_KEY "0123456789abcdef1011" -#define DEFAULT_PRNG_KSZ 20 -#define DEFAULT_PRNG_IV "defaultv" -#define DEFAULT_PRNG_IVSZ 8 -#define DEFAULT_BLK_SZ 16 -#define DEFAULT_V_SEED "zaybxcwdveuftgsh" - -/* - * Flags for the prng_context flags field - */ - -#define PRNG_FIXED_SIZE 0x1 -#define PRNG_NEED_RESET 0x2 - -/* - * Note: DT is our counter value - * I is our intermediate value - * V is our seed vector - * See http://csrc.nist.gov/groups/STM/cavp/documents/rng/931rngext.pdf - * for implementation details - */ - - -struct prng_context { - char *prng_key; - char *prng_iv; - spinlock_t prng_lock; - unsigned char rand_data[DEFAULT_BLK_SZ]; - unsigned char last_rand_data[DEFAULT_BLK_SZ]; - unsigned char DT[DEFAULT_BLK_SZ]; - unsigned char I[DEFAULT_BLK_SZ]; - unsigned char V[DEFAULT_BLK_SZ]; - u32 rand_data_valid; - struct crypto_blkcipher *tfm; - u32 flags; -}; - -static int dbg; - -static void hexdump(char *note, unsigned char *buf, unsigned int len) -{ - if (dbg) { - printk(KERN_CRIT "%s", note); - print_hex_dump(KERN_CONT, "", DUMP_PREFIX_OFFSET, - 16, 1, - buf, len, false); - } -} - -#define dbgprint(format, args...) do {if(dbg) printk(format, ##args);} while(0) - -static void xor_vectors(unsigned char *in1, unsigned char *in2, - unsigned char *out, unsigned int size) -{ - int i; - - for (i=0;itfm; - desc.flags = 0; - - - dbgprint(KERN_CRIT "Calling _get_more_prng_bytes for context %p\n",ctx); - - hexdump("Input DT: ", ctx->DT, DEFAULT_BLK_SZ); - hexdump("Input I: ", ctx->I, DEFAULT_BLK_SZ); - hexdump("Input V: ", ctx->V, DEFAULT_BLK_SZ); - - /* - * This algorithm is a 3 stage state machine - */ - for (i=0;i<3;i++) { - - desc.tfm = ctx->tfm; - desc.flags = 0; - switch (i) { - case 0: - /* - * Start by encrypting the counter value - * This gives us an intermediate value I - */ - memcpy(tmp, ctx->DT, DEFAULT_BLK_SZ); - sg_init_one(&sg_out, &ctx->I[0], DEFAULT_BLK_SZ); - hexdump("tmp stage 0: ", tmp, DEFAULT_BLK_SZ); - break; - case 1: - - /* - * Next xor I with our secret vector V - * encrypt that result to obtain our - * pseudo random data which we output - */ - xor_vectors(ctx->I, ctx->V, tmp, DEFAULT_BLK_SZ); - sg_init_one(&sg_out, &ctx->rand_data[0], DEFAULT_BLK_SZ); - hexdump("tmp stage 1: ", tmp, DEFAULT_BLK_SZ); - break; - case 2: - /* - * First check that we didn't produce the same random data - * that we did last time around through this - */ - if (!memcmp(ctx->rand_data, ctx->last_rand_data, DEFAULT_BLK_SZ)) { - printk(KERN_ERR "ctx %p Failed repetition check!\n", - ctx); - ctx->flags |= PRNG_NEED_RESET; - return -1; - } - memcpy(ctx->last_rand_data, ctx->rand_data, DEFAULT_BLK_SZ); - - /* - * Lastly xor the random data with I - * and encrypt that to obtain a new secret vector V - */ - xor_vectors(ctx->rand_data, ctx->I, tmp, DEFAULT_BLK_SZ); - sg_init_one(&sg_out, &ctx->V[0], DEFAULT_BLK_SZ); - hexdump("tmp stage 2: ", tmp, DEFAULT_BLK_SZ); - break; - } - - /* Initialize our input buffer */ - sg_init_one(&sg_in, &tmp[0], DEFAULT_BLK_SZ); - - /* do the encryption */ - ret = crypto_blkcipher_encrypt(&desc, &sg_out, &sg_in, DEFAULT_BLK_SZ); - - /* And check the result */ - if (ret) { - dbgprint(KERN_CRIT "Encryption of new block failed for context %p\n",ctx); - ctx->rand_data_valid = DEFAULT_BLK_SZ; - return -1; - } - - } - - /* - * Now update our DT value - */ - for (i=DEFAULT_BLK_SZ-1;i>0;i--) { - ctx->DT[i] = ctx->DT[i-1]; - } - ctx->DT[0] += 1; - - dbgprint("Returning new block for context %p\n",ctx); - ctx->rand_data_valid = 0; - - hexdump("Output DT: ", ctx->DT, DEFAULT_BLK_SZ); - hexdump("Output I: ", ctx->I, DEFAULT_BLK_SZ); - hexdump("Output V: ", ctx->V, DEFAULT_BLK_SZ); - hexdump("New Random Data: ", ctx->rand_data, DEFAULT_BLK_SZ); - - return 0; -} - -/* Our exported functions */ -int get_prng_bytes(char *buf, int nbytes, struct prng_context *ctx) -{ - unsigned long flags; - unsigned char *ptr = buf; - unsigned int byte_count = (unsigned int)nbytes; - int err; - - - if (nbytes < 0) - return -EINVAL; - - spin_lock_irqsave(&ctx->prng_lock, flags); - - err = -EFAULT; - if (ctx->flags & PRNG_NEED_RESET) - goto done; - - /* - * If the FIXED_SIZE flag is on, only return whole blocks of - * pseudo random data - */ - err = -EINVAL; - if (ctx->flags & PRNG_FIXED_SIZE) { - if (nbytes < DEFAULT_BLK_SZ) - goto done; - byte_count = DEFAULT_BLK_SZ; - } - - err = byte_count; - - dbgprint(KERN_CRIT "getting %d random bytes for context %p\n",byte_count, ctx); - - -remainder: - if (ctx->rand_data_valid == DEFAULT_BLK_SZ) { - if (_get_more_prng_bytes(ctx) < 0) { - memset(buf, 0, nbytes); - err = -EFAULT; - goto done; - } - } - - /* - * Copy up to the next whole block size - */ - if (byte_count < DEFAULT_BLK_SZ) { - for (;ctx->rand_data_valid < DEFAULT_BLK_SZ; ctx->rand_data_valid++) { - *ptr = ctx->rand_data[ctx->rand_data_valid]; - ptr++; - byte_count--; - if (byte_count == 0) - goto done; - } - } - - /* - * Now copy whole blocks - */ - for(;byte_count >= DEFAULT_BLK_SZ; byte_count -= DEFAULT_BLK_SZ) { - if (_get_more_prng_bytes(ctx) < 0) { - memset(buf, 0, nbytes); - err = -1; - goto done; - } - memcpy(ptr, ctx->rand_data, DEFAULT_BLK_SZ); - ctx->rand_data_valid += DEFAULT_BLK_SZ; - ptr += DEFAULT_BLK_SZ; - } - - /* - * Now copy any extra partial data - */ - if (byte_count) - goto remainder; - -done: - spin_unlock_irqrestore(&ctx->prng_lock, flags); - dbgprint(KERN_CRIT "returning %d from get_prng_bytes in context %p\n",err, ctx); - return err; -} -EXPORT_SYMBOL_GPL(get_prng_bytes); - -struct prng_context *alloc_prng_context(void) -{ - struct prng_context *ctx=kzalloc(sizeof(struct prng_context), GFP_KERNEL); - - spin_lock_init(&ctx->prng_lock); - - if (reset_prng_context(ctx, NULL, NULL, NULL, NULL)) { - kfree(ctx); - ctx = NULL; - } - - dbgprint(KERN_CRIT "returning context %p\n",ctx); - return ctx; -} - -EXPORT_SYMBOL_GPL(alloc_prng_context); - -void free_prng_context(struct prng_context *ctx) -{ - crypto_free_blkcipher(ctx->tfm); - kfree(ctx); -} -EXPORT_SYMBOL_GPL(free_prng_context); - -int reset_prng_context(struct prng_context *ctx, - unsigned char *key, unsigned char *iv, - unsigned char *V, unsigned char *DT) -{ - int ret; - int iv_len; - int rc = -EFAULT; - - spin_lock(&ctx->prng_lock); - ctx->flags |= PRNG_NEED_RESET; - - if (key) - memcpy(ctx->prng_key,key,strlen(ctx->prng_key)); - else - ctx->prng_key = DEFAULT_PRNG_KEY; - - if (iv) - memcpy(ctx->prng_iv,iv, strlen(ctx->prng_iv)); - else - ctx->prng_iv = DEFAULT_PRNG_IV; - - if (V) - memcpy(ctx->V,V,DEFAULT_BLK_SZ); - else - memcpy(ctx->V,DEFAULT_V_SEED,DEFAULT_BLK_SZ); - - if (DT) - memcpy(ctx->DT, DT, DEFAULT_BLK_SZ); - else - memset(ctx->DT, 0, DEFAULT_BLK_SZ); - - memset(ctx->rand_data,0,DEFAULT_BLK_SZ); - memset(ctx->last_rand_data,0,DEFAULT_BLK_SZ); - - if (ctx->tfm) - crypto_free_blkcipher(ctx->tfm); - - ctx->tfm = crypto_alloc_blkcipher("rfc3686(ctr(aes))",0,0); - if (!ctx->tfm) { - dbgprint(KERN_CRIT "Failed to alloc crypto tfm for context %p\n",ctx->tfm); - goto out; - } - - ctx->rand_data_valid = DEFAULT_BLK_SZ; - - ret = crypto_blkcipher_setkey(ctx->tfm, ctx->prng_key, strlen(ctx->prng_key)); - if (ret) { - dbgprint(KERN_CRIT "PRNG: setkey() failed flags=%x\n", - crypto_blkcipher_get_flags(ctx->tfm)); - crypto_free_blkcipher(ctx->tfm); - goto out; - } - - iv_len = crypto_blkcipher_ivsize(ctx->tfm); - if (iv_len) { - crypto_blkcipher_set_iv(ctx->tfm, ctx->prng_iv, iv_len); - } - rc = 0; - ctx->flags &= ~PRNG_NEED_RESET; -out: - spin_unlock(&ctx->prng_lock); - - return rc; - -} -EXPORT_SYMBOL_GPL(reset_prng_context); - -/* Module initalization */ -static int __init prng_mod_init(void) -{ - -#ifdef TEST_PRNG_ON_START - int i; - unsigned char tmpbuf[DEFAULT_BLK_SZ]; - - struct prng_context *ctx = alloc_prng_context(); - if (ctx == NULL) - return -EFAULT; - for (i=0;i<16;i++) { - if (get_prng_bytes(tmpbuf, DEFAULT_BLK_SZ, ctx) < 0) { - free_prng_context(ctx); - return -EFAULT; - } - } - free_prng_context(ctx); -#endif - - return 0; -} - -static void __exit prng_mod_fini(void) -{ - return; -} - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Software Pseudo Random Number Generator"); -MODULE_AUTHOR("Neil Horman "); -module_param(dbg, int, 0); -MODULE_PARM_DESC(dbg, "Boolean to enable debugging (0/1 == off/on)"); -module_init(prng_mod_init); -module_exit(prng_mod_fini); diff --git a/crypto/prng.h b/crypto/prng.h deleted file mode 100644 index 1ac9be5009b7..000000000000 --- a/crypto/prng.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * PRNG: Pseudo Random Number Generator - * - * (C) Neil Horman - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * any later version. - * - * - */ - -#ifndef _PRNG_H_ -#define _PRNG_H_ -struct prng_context; - -int get_prng_bytes(char *buf, int nbytes, struct prng_context *ctx); -struct prng_context *alloc_prng_context(void); -int reset_prng_context(struct prng_context *ctx, - unsigned char *key, unsigned char *iv, - unsigned char *V, - unsigned char *DT); -void free_prng_context(struct prng_context *ctx); - -#endif - -- cgit v1.2.3 From 0937502af7c9b648ed4e884ccb7f504b01a005a1 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Wed, 28 May 2008 10:32:22 -0700 Subject: slub: Add check for kfree() of non slab objects. We can detect kfree()s on non slab objects by checking for PageCompound(). Works in the same way as for ksize. This helped me catch an invalid kfree(). Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- mm/slub.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/slub.c b/mm/slub.c index 5f6e2c4a2ba7..b3f2e713cdf1 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -2766,6 +2766,7 @@ void kfree(const void *x) page = virt_to_head_page(x); if (unlikely(!PageSlab(page))) { + BUG_ON(!PageCompound(page)); put_page(page); return; } -- cgit v1.2.3 From 88e4ccf294ca62c2da998012a83533ce150c8dce Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 23 Jun 2008 02:58:37 +0400 Subject: slub: current is always valid Acked-by: Christoph Lameter Signed-off-by: Alexey Dobriyan Signed-off-by: Pekka Enberg --- mm/slub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/slub.c b/mm/slub.c index b3f2e713cdf1..488400d10700 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -411,7 +411,7 @@ static void set_track(struct kmem_cache *s, void *object, if (addr) { p->addr = addr; p->cpu = smp_processor_id(); - p->pid = current ? current->pid : -1; + p->pid = current->pid; p->when = jiffies; } else memset(p, 0, sizeof(struct track)); -- cgit v1.2.3 From e79aec291da55aa322ddb5d8f3bb04cdf69470d5 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Fri, 4 Jul 2008 00:40:32 +0530 Subject: slab: rename slab_destroy_objs With the removal of destructors, slab_destroy_objs no longer actually destroys any objects, making the kernel doc incorrect and the function name misleading. In keeping with the other debug functions, rename it to slab_destroy_debugcheck and drop the kernel doc. Signed-off-by: Rabin Vincent Signed-off-by: Pekka Enberg --- mm/slab.c | 14 +++----------- 1 file changed, 3 insertions(+), 11 deletions(-) diff --git a/mm/slab.c b/mm/slab.c index 046607f05f3e..b4aa4c88250e 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -1901,15 +1901,7 @@ static void check_poison_obj(struct kmem_cache *cachep, void *objp) #endif #if DEBUG -/** - * slab_destroy_objs - destroy a slab and its objects - * @cachep: cache pointer being destroyed - * @slabp: slab pointer being destroyed - * - * Call the registered destructor for each object in a slab that is being - * destroyed. - */ -static void slab_destroy_objs(struct kmem_cache *cachep, struct slab *slabp) +static void slab_destroy_debugcheck(struct kmem_cache *cachep, struct slab *slabp) { int i; for (i = 0; i < cachep->num; i++) { @@ -1938,7 +1930,7 @@ static void slab_destroy_objs(struct kmem_cache *cachep, struct slab *slabp) } } #else -static void slab_destroy_objs(struct kmem_cache *cachep, struct slab *slabp) +static void slab_destroy_debugcheck(struct kmem_cache *cachep, struct slab *slabp) { } #endif @@ -1956,7 +1948,7 @@ static void slab_destroy(struct kmem_cache *cachep, struct slab *slabp) { void *addr = slabp->s_mem - slabp->colouroff; - slab_destroy_objs(cachep, slabp); + slab_destroy_debugcheck(cachep, slabp); if (unlikely(cachep->flags & SLAB_DESTROY_BY_RCU)) { struct slab_rcu *slab_rcu; -- cgit v1.2.3 From 2954c02a884dc0ba9e91882c0aba13bcb9d22e6c Mon Sep 17 00:00:00 2001 From: "Chen, Huacai" Date: Tue, 10 Jun 2008 09:05:08 +0800 Subject: [MIPS] modify the MIPS CPU classfication Signed-off-by: Huacai Chen Signed-off-by: Ralf Baechle --- include/asm-mips/cpu.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h index 1c35cac6f35b..229a786101d9 100644 --- a/include/asm-mips/cpu.h +++ b/include/asm-mips/cpu.h @@ -66,8 +66,10 @@ #define PRID_IMP_RM7000 0x2700 #define PRID_IMP_NEVADA 0x2800 /* RM5260 ??? */ #define PRID_IMP_RM9000 0x3400 +#define PRID_IMP_LOONGSON1 0x4200 #define PRID_IMP_R5432 0x5400 #define PRID_IMP_R5500 0x5500 +#define PRID_IMP_LOONGSON2 0x6300 #define PRID_IMP_UNKNOWN 0xff00 @@ -90,8 +92,6 @@ #define PRID_IMP_24KE 0x9600 #define PRID_IMP_74K 0x9700 #define PRID_IMP_1004K 0x9900 -#define PRID_IMP_LOONGSON1 0x4200 -#define PRID_IMP_LOONGSON2 0x6300 /* * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE -- cgit v1.2.3 From cb11dfa0247df479e384c4a7ab6846f3a6bf1570 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 9 Jun 2008 16:30:03 -0700 Subject: [MIPS] Remove board_watchpoint_handler It is not used anywhere in tree. Signed-off-by: David Daney Signed-off-by: Andrew Morton Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 6 ------ include/asm-mips/traps.h | 1 - 2 files changed, 7 deletions(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index f9165d1a17bf..6e7e4a2775f6 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -71,7 +71,6 @@ extern asmlinkage void handle_reserved(void); extern int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, int has_fpu); -void (*board_watchpoint_handler)(struct pt_regs *regs); void (*board_be_init)(void); int (*board_be_handler)(struct pt_regs *regs, int is_fixup); void (*board_nmi_handler_setup)(void); @@ -892,11 +891,6 @@ asmlinkage void do_mdmx(struct pt_regs *regs) asmlinkage void do_watch(struct pt_regs *regs) { - if (board_watchpoint_handler) { - (*board_watchpoint_handler)(regs); - return; - } - /* * We use the watch exception where available to detect stack * overflows. diff --git a/include/asm-mips/traps.h b/include/asm-mips/traps.h index e5dbde625ec2..90ff2f497c50 100644 --- a/include/asm-mips/traps.h +++ b/include/asm-mips/traps.h @@ -24,6 +24,5 @@ extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup); extern void (*board_nmi_handler_setup)(void); extern void (*board_ejtag_handler_setup)(void); extern void (*board_bind_eic_interrupt)(int irq, int regset); -extern void (*board_watchpoint_handler)(struct pt_regs *regs); #endif /* _ASM_TRAPS_H */ -- cgit v1.2.3 From c88a8b4ab0e1a1f06938939d9ba42e9da6144ccb Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 9 Jun 2008 17:19:53 +0100 Subject: [MIPS] Remove obsolete isa_slot_offset The isa_slot_offset variable and its __ISA_IO_base macro is not used anywhere anymore. It does not look like a decent interface per today's standards either. Remove both including all places of initialization. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- arch/mips/jazz/setup.c | 1 - arch/mips/kernel/setup.c | 7 ------- arch/mips/pci/pci-bcm1480.c | 2 -- arch/mips/pci/pci-sb1250.c | 3 --- arch/mips/sni/setup.c | 1 - include/asm-mips/io.h | 17 ----------------- 6 files changed, 31 deletions(-) diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index a7947199c99b..f136c8a8591c 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -79,7 +79,6 @@ void __init plat_mem_setup(void) if (mips_machtype == MACH_MIPS_MAGNUM_4000) EISA_bus = 1; #endif - isa_slot_offset = 0xe3000000; /* request I/O space for devices used on all i[345]86 PCs */ for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++) diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index c6a063b2a0d9..c04e4e3afede 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -68,13 +68,6 @@ static char command_line[CL_SIZE]; const unsigned long mips_io_port_base __read_mostly = -1; EXPORT_SYMBOL(mips_io_port_base); -/* - * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped - * for the processor. - */ -unsigned long isa_slot_offset; -EXPORT_SYMBOL(isa_slot_offset); - static struct resource code_resource = { .name = "Kernel code", }; static struct resource data_resource = { .name = "Kernel data", }; diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index 87e2c8f54e2d..d19d262157f2 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -254,8 +254,6 @@ static int __init bcm1480_pcibios_init(void) ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536); bcm1480_controller.io_map_base -= bcm1480_controller.io_offset; set_io_port_base(bcm1480_controller.io_map_base); - isa_slot_offset = (unsigned long) - ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024); register_pci_controller(&bcm1480_controller); diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index 2a09ad91ec8c..9bc102a1380e 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -254,9 +254,6 @@ static int __init sb1250_pcibios_init(void) * works correctly with most of Linux's drivers. * XXX ehs: Should this happen in PCI Device mode? */ - isa_slot_offset = (unsigned long) - ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024); - io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024); sb1250_controller.io_map_base = io_map_base; set_io_port_base((unsigned long)io_map_base); diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c index 5484e1c62054..a49272ce7ef5 100644 --- a/arch/mips/sni/setup.c +++ b/arch/mips/sni/setup.c @@ -116,7 +116,6 @@ void __init plat_mem_setup(void) /* * Setup (E)ISA I/O memory access stuff */ - isa_slot_offset = CKSEG1ADDR(0xb0000000); #ifdef CONFIG_EISA EISA_bus = 1; #endif diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index f18d2816cbec..501a40b9f18d 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -160,13 +160,6 @@ static inline void * isa_bus_to_virt(unsigned long address) #define virt_to_bus virt_to_phys #define bus_to_virt phys_to_virt -/* - * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped - * for the processor. This implies the assumption that there is only - * one of these busses. - */ -extern unsigned long isa_slot_offset; - /* * Change "struct page" to physical address. */ @@ -527,16 +520,6 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int memcpy((void __force *) dst, src, count); } -/* - * ISA space is 'always mapped' on currently supported MIPS systems, no need - * to explicitly ioremap() it. The fact that the ISA IO space is mapped - * to PAGE_OFFSET is pure coincidence - it does not mean ISA values - * are physical addresses. The following constant pointer can be - * used as the IO-area pointer (it can be iounmapped as well, so the - * analogy with PCI is quite large): - */ -#define __ISA_IO_base ((char *)(isa_slot_offset)) - /* * The caches on some architectures aren't dma-coherent and have need to * handle this in software. There are three types of operations that -- cgit v1.2.3 From 07cdb78436d52416a582e645b9afb6e26f986bc9 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Thu, 29 May 2008 17:57:08 +0300 Subject: [MIPS] fix sparse warning about setup_early_printk() This patch fixes the following sparse warning: <<<<<<<< arch/mips/kernel/early_printk.c:35:13: warning: symbol 'setup_early_printk' was not declared. Should it be static? <<<<<<<< The fix is to define a prototype of the setup_early_printk() function and to include the appropriate header into arch/mips/kernel/early_printk.c. [Ralf: Sorted includes again] Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/kernel/early_printk.c | 2 ++ arch/mips/kernel/setup.c | 6 +----- include/asm-mips/setup.h | 2 ++ 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c index 9dccfa4752b2..9ae813eb782e 100644 --- a/arch/mips/kernel/early_printk.c +++ b/arch/mips/kernel/early_printk.c @@ -10,6 +10,8 @@ #include #include +#include + extern void prom_putchar(char); static void __init diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index c04e4e3afede..8af84867e74d 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -550,11 +550,7 @@ void __init setup_arch(char **cmdline_p) prom_init(); #ifdef CONFIG_EARLY_PRINTK - { - extern void setup_early_printk(void); - - setup_early_printk(); - } + setup_early_printk(); #endif cpu_report(); check_bugs_early(); diff --git a/include/asm-mips/setup.h b/include/asm-mips/setup.h index 70009a902639..883f59bfa097 100644 --- a/include/asm-mips/setup.h +++ b/include/asm-mips/setup.h @@ -3,4 +3,6 @@ #define COMMAND_LINE_SIZE 256 +extern void setup_early_printk(void); + #endif /* __SETUP_H */ -- cgit v1.2.3 From 17f61e61b4a1d3ca254668cf12c1c5d828d892fd Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Thu, 29 May 2008 17:57:09 +0300 Subject: [MIPS] Make two functions static The following routines uasm_rel_highest() uasm_rel_higher() are needlessly defined global. This patch makes them static. Compile-tested using a customized config for the Malta board. Booting the same board up to the shell prompt was also successful with this patch applied. Spotted by sparse. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/mm/uasm.c | 4 ++-- arch/mips/mm/uasm.h | 2 -- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c index 1655aa69e133..f467199676a8 100644 --- a/arch/mips/mm/uasm.c +++ b/arch/mips/mm/uasm.c @@ -396,7 +396,7 @@ int __cpuinit uasm_in_compat_space_p(long addr) #endif } -int __cpuinit uasm_rel_highest(long val) +static int __cpuinit uasm_rel_highest(long val) { #ifdef CONFIG_64BIT return ((((val + 0x800080008000L) >> 48) & 0xffff) ^ 0x8000) - 0x8000; @@ -405,7 +405,7 @@ int __cpuinit uasm_rel_highest(long val) #endif } -int __cpuinit uasm_rel_higher(long val) +static int __cpuinit uasm_rel_higher(long val) { #ifdef CONFIG_64BIT return ((((val + 0x80008000L) >> 32) & 0xffff) ^ 0x8000) - 0x8000; diff --git a/arch/mips/mm/uasm.h b/arch/mips/mm/uasm.h index 0d6a66f32030..c6d1e3dd82d4 100644 --- a/arch/mips/mm/uasm.h +++ b/arch/mips/mm/uasm.h @@ -103,8 +103,6 @@ struct uasm_label { void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid); #ifdef CONFIG_64BIT int uasm_in_compat_space_p(long addr); -int uasm_rel_highest(long val); -int uasm_rel_higher(long val); #endif int uasm_rel_hi(long val); int uasm_rel_lo(long val); -- cgit v1.2.3 From f366e2085f28358a5294b8cdc847a377c02eb22d Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Thu, 29 May 2008 17:57:11 +0300 Subject: [MIPS] unexport {allocate,free}_irqno The following routines allocate_irqno() free_irqno() seem not to be used outside of the core kernel code, hence exporting these functions is pointless. This patch removes the export. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/kernel/irq.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index e3309ff9ece4..6045b9a51a35 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -44,8 +44,6 @@ again: return irq; } -EXPORT_SYMBOL_GPL(allocate_irqno); - /* * Allocate the 16 legacy interrupts for i8259 devices. This happens early * in the kernel initialization so treating allocation failure as BUG() is @@ -66,8 +64,6 @@ void free_irqno(unsigned int irq) smp_mb__after_clear_bit(); } -EXPORT_SYMBOL_GPL(free_irqno); - /* * 'what should we do if we get a hw irq event on an illegal vector'. * each architecture has to answer this themselves. -- cgit v1.2.3 From 4b62220b608ab71876d8920d5590f1db4ee2eb4a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:29 +0100 Subject: [MIPS] Alchemy, PNX: Use symbolic constants for DMA masks. Signed-off-by: Ralf Baechle --- arch/mips/au1000/common/platform.c | 29 +++++++++++++++-------------- arch/mips/au1000/pb1200/platform.c | 5 +++-- arch/mips/nxp/pnx8550/common/platform.c | 9 +++++---- 3 files changed, 23 insertions(+), 20 deletions(-) diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 74d6d4a593be..dc8a67efac28 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -11,6 +11,7 @@ * warranty of any kind, whether express or implied. */ +#include #include #include #include @@ -77,14 +78,14 @@ static struct resource au1xxx_usb_ohci_resources[] = { }; /* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32)0; +static u64 ohci_dmamask = DMA_32BIT_MASK; static struct platform_device au1xxx_usb_ohci_device = { .name = "au1xxx-ohci", .id = 0, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1xxx_usb_ohci_resources), .resource = au1xxx_usb_ohci_resources, @@ -106,14 +107,14 @@ static struct resource au1100_lcd_resources[] = { } }; -static u64 au1100_lcd_dmamask = ~(u32)0; +static u64 au1100_lcd_dmamask = DMA_32BIT_MASK; static struct platform_device au1100_lcd_device = { .name = "au1100-lcd", .id = 0, .dev = { .dma_mask = &au1100_lcd_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1100_lcd_resources), .resource = au1100_lcd_resources, @@ -135,14 +136,14 @@ static struct resource au1xxx_usb_ehci_resources[] = { }, }; -static u64 ehci_dmamask = ~(u32)0; +static u64 ehci_dmamask = DMA_32BIT_MASK; static struct platform_device au1xxx_usb_ehci_device = { .name = "au1xxx-ehci", .id = 0, .dev = { .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1xxx_usb_ehci_resources), .resource = au1xxx_usb_ehci_resources, @@ -180,14 +181,14 @@ static struct resource au1xxx_mmc_resources[] = { } }; -static u64 udc_dmamask = ~(u32)0; +static u64 udc_dmamask = DMA_32BIT_MASK; static struct platform_device au1xxx_usb_gdt_device = { .name = "au1xxx-udc", .id = 0, .dev = { .dma_mask = &udc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1xxx_usb_gdt_resources), .resource = au1xxx_usb_gdt_resources, @@ -207,14 +208,14 @@ static struct resource au1xxx_usb_otg_resources[] = { }, }; -static u64 uoc_dmamask = ~(u32)0; +static u64 uoc_dmamask = DMA_32BIT_MASK; static struct platform_device au1xxx_usb_otg_device = { .name = "au1xxx-uoc", .id = 0, .dev = { .dma_mask = &uoc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1xxx_usb_otg_resources), .resource = au1xxx_usb_otg_resources, @@ -233,27 +234,27 @@ static struct resource au1200_lcd_resources[] = { } }; -static u64 au1200_lcd_dmamask = ~(u32)0; +static u64 au1200_lcd_dmamask = DMA_32BIT_MASK; static struct platform_device au1200_lcd_device = { .name = "au1200-lcd", .id = 0, .dev = { .dma_mask = &au1200_lcd_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1200_lcd_resources), .resource = au1200_lcd_resources, }; -static u64 au1xxx_mmc_dmamask = ~(u32)0; +static u64 au1xxx_mmc_dmamask = DMA_32BIT_MASK; static struct platform_device au1xxx_mmc_device = { .name = "au1xxx-mmc", .id = 0, .dev = { .dma_mask = &au1xxx_mmc_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(au1xxx_mmc_resources), .resource = au1xxx_mmc_resources, diff --git a/arch/mips/au1000/pb1200/platform.c b/arch/mips/au1000/pb1200/platform.c index 5930110b9b6d..f8fb0aeac571 100644 --- a/arch/mips/au1000/pb1200/platform.c +++ b/arch/mips/au1000/pb1200/platform.c @@ -18,6 +18,7 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include #include #include @@ -36,14 +37,14 @@ static struct resource ide_resources[] = { } }; -static u64 ide_dmamask = ~(u32)0; +static u64 ide_dmamask = DMA_32BIT_MASK; static struct platform_device ide_device = { .name = "au1200-ide", .id = 0, .dev = { .dma_mask = &ide_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(ide_resources), .resource = ide_resources diff --git a/arch/mips/nxp/pnx8550/common/platform.c b/arch/mips/nxp/pnx8550/common/platform.c index c7c763dbe588..21d2955359b3 100644 --- a/arch/mips/nxp/pnx8550/common/platform.c +++ b/arch/mips/nxp/pnx8550/common/platform.c @@ -13,6 +13,7 @@ * warranty of any kind, whether express or implied. */ #include +#include #include #include #include @@ -91,16 +92,16 @@ struct pnx8xxx_port pnx8xxx_ports[] = { }; /* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = ~(u32)0; +static u64 ohci_dmamask = DMA_32BIT_MASK; -static u64 uart_dmamask = ~(u32)0; +static u64 uart_dmamask = DMA_32BIT_MASK; static struct platform_device pnx8550_usb_ohci_device = { .name = "pnx8550-ohci", .id = -1, .dev = { .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, }, .num_resources = ARRAY_SIZE(pnx8550_usb_ohci_resources), .resource = pnx8550_usb_ohci_resources, @@ -111,7 +112,7 @@ static struct platform_device pnx8550_uart_device = { .id = -1, .dev = { .dma_mask = &uart_dmamask, - .coherent_dma_mask = 0xffffffff, + .coherent_dma_mask = DMA_32BIT_MASK, .platform_data = pnx8xxx_ports, }, .num_resources = ARRAY_SIZE(pnx8550_uart_resources), -- cgit v1.2.3 From 997288517ec839b7639fcba77111256b13a66000 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Mon, 9 Jun 2008 08:39:58 +0200 Subject: [MIPS] Alchemy: remove unused MMC macros from db1x00 header. Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle --- include/asm-mips/mach-db1x00/db1x00.h | 45 ----------------------------------- 1 file changed, 45 deletions(-) diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h index 612ae90dbcb8..1a515b8c870f 100644 --- a/include/asm-mips/mach-db1x00/db1x00.h +++ b/include/asm-mips/mach-db1x00/db1x00.h @@ -145,51 +145,6 @@ typedef volatile struct #define SET_VCC_VPP(VCC, VPP, SLOT)\ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) -/* - * SD controller macros - */ - -/* Detect card. */ -#define mmc_card_inserted(_n_, _res_) \ - do { \ - BCSR * const bcsr = (BCSR *)0xAE000000; \ - unsigned long mmc_wp, board_specific; \ - if ((_n_)) { \ - mmc_wp = BCSR_BOARD_SD1_WP; \ - } else { \ - mmc_wp = BCSR_BOARD_SD0_WP; \ - } \ - board_specific = au_readl((unsigned long)(&bcsr->specific)); \ - if (!(board_specific & mmc_wp)) {/* low means card present */ \ - *(int *)(_res_) = 1; \ - } else { \ - *(int *)(_res_) = 0; \ - } \ - } while (0) - -/* - * Apply power to card slot(s). - */ -#define mmc_power_on(_n_) \ - do { \ - BCSR * const bcsr = (BCSR *)0xAE000000; \ - unsigned long mmc_pwr, mmc_wp, board_specific; \ - if ((_n_)) { \ - mmc_pwr = BCSR_BOARD_SD1_PWR; \ - mmc_wp = BCSR_BOARD_SD1_WP; \ - } else { \ - mmc_pwr = BCSR_BOARD_SD0_PWR; \ - mmc_wp = BCSR_BOARD_SD0_WP; \ - } \ - board_specific = au_readl((unsigned long)(&bcsr->specific)); \ - if (!(board_specific & mmc_wp)) {/* low means card present */ \ - board_specific |= mmc_pwr; \ - au_writel(board_specific, (int)(&bcsr->specific)); \ - au_sync(); \ - } \ - } while (0) - - /* * NAND defines * -- cgit v1.2.3 From 2957c9e61ee9c37e7ebf2c8acab03e073fe942fd Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:30 +0100 Subject: [MIPS] IRIX: Goodbye and thanks for all the fish Never terribly functional or popular, plagued by hard to fix bugs the time to say goodbye has more than arrived. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 4 - arch/mips/kernel/Makefile | 4 - arch/mips/kernel/irix5sys.S | 1041 ------------------- arch/mips/kernel/irixelf.c | 1361 ------------------------- arch/mips/kernel/irixinv.c | 78 -- arch/mips/kernel/irixioctl.c | 213 ---- arch/mips/kernel/irixsig.c | 888 ----------------- arch/mips/kernel/process.c | 7 - arch/mips/kernel/scall32-o32.S | 19 - arch/mips/kernel/sysirix.c | 2140 ---------------------------------------- include/asm-mips/inventory.h | 24 - include/asm-mips/namei.h | 25 +- include/asm-mips/prctl.h | 41 - include/asm-mips/signal.h | 3 - 14 files changed, 5 insertions(+), 5843 deletions(-) delete mode 100644 arch/mips/kernel/irix5sys.S delete mode 100644 arch/mips/kernel/irixelf.c delete mode 100644 arch/mips/kernel/irixinv.c delete mode 100644 arch/mips/kernel/irixioctl.c delete mode 100644 arch/mips/kernel/irixsig.c delete mode 100644 arch/mips/kernel/sysirix.c delete mode 100644 include/asm-mips/inventory.h delete mode 100644 include/asm-mips/prctl.h diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 24c5dee91768..21d6ec1e5368 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2064,10 +2064,6 @@ source "fs/Kconfig.binfmt" config TRAD_SIGNALS bool -config BINFMT_IRIX - bool "Include IRIX binary compatibility" - depends on CPU_BIG_ENDIAN && 32BIT && BROKEN - config MIPS32_COMPAT bool "Kernel support for Linux/MIPS 32-bit binary compatibility" depends on 64BIT diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 65e46a6d4178..48ae915b38e0 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -20,9 +20,6 @@ obj-$(CONFIG_CSRC_R4K) += csrc-r4k.o obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o obj-$(CONFIG_SYNC_R4K) += sync-r4k.o -binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \ - irix5sys.o sysirix.o - obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_MODULES) += mips_ksyms.o module.o @@ -70,7 +67,6 @@ obj-$(CONFIG_IRQ_GIC) += irq-gic.o obj-$(CONFIG_32BIT) += scall32-o32.o obj-$(CONFIG_64BIT) += scall64-64.o -obj-$(CONFIG_BINFMT_IRIX) += binfmt_irix.o obj-$(CONFIG_MIPS32_COMPAT) += linux32.o ptrace32.o signal32.o obj-$(CONFIG_MIPS32_N32) += binfmt_elfn32.o scall64-n32.o signal_n32.o obj-$(CONFIG_MIPS32_O32) += binfmt_elfo32.o scall64-o32.o diff --git a/arch/mips/kernel/irix5sys.S b/arch/mips/kernel/irix5sys.S deleted file mode 100644 index eeef891093ed..000000000000 --- a/arch/mips/kernel/irix5sys.S +++ /dev/null @@ -1,1041 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * 32-bit IRIX5 ABI system call table derived from original file 'irix5sys.h' - * created by David S. Miller. - * - * Copyright (C) 1996 - 2004 David S. Miller - * Copyright (C) 2004 Steven J. Hill - */ -#include - - /* - * Key: - * V == Valid and should work as expected for most cases. - * HV == Half Valid, some things will work, some likely will not - * IV == InValid, certainly will not work at all yet - * ?V == ?'ably Valid, I have not done enough looking into it - * DC == Don't Care, a rats ass we couldn't give - */ - - .macro irix5syscalltable - - sys sys_syscall 0 /* 1000 sysindir() V*/ - sys sys_exit 1 /* 1001 exit() V*/ - sys sys_fork 0 /* 1002 fork() V*/ - sys sys_read 3 /* 1003 read() V*/ - sys sys_write 3 /* 1004 write() V*/ - sys sys_open 3 /* 1005 open() V*/ - sys sys_close 1 /* 1006 close() V*/ - sys irix_unimp 0 /* 1007 (XXX IRIX 4 wait) V*/ - sys sys_creat 2 /* 1008 creat() V*/ - sys sys_link 2 /* 1009 link() V*/ - sys sys_unlink 1 /* 1010 unlink() V*/ - sys irix_exec 0 /* 1011 exec() V*/ - sys sys_chdir 1 /* 1012 chdir() V*/ - sys irix_gtime 0 /* 1013 time() V*/ - sys irix_unimp 0 /* 1014 (XXX IRIX 4 mknod) V*/ - sys sys_chmod 2 /* 1015 chmod() V*/ - sys sys_chown 3 /* 1016 chown() V*/ - sys irix_brk 1 /* 1017 break() V*/ - sys irix_unimp 0 /* 1018 (XXX IRIX 4 stat) V*/ - sys sys_lseek 3 /* 1019 lseek() XXX64bit HV*/ - sys irix_getpid 0 /* 1020 getpid() V*/ - sys irix_mount 6 /* 1021 mount() IV*/ - sys sys_umount 1 /* 1022 umount() V*/ - sys sys_setuid 1 /* 1023 setuid() V*/ - sys irix_getuid 0 /* 1024 getuid() V*/ - sys irix_stime 1 /* 1025 stime() V*/ - sys irix_unimp 4 /* 1026 XXX ptrace() IV*/ - sys irix_alarm 1 /* 1027 alarm() V*/ - sys irix_unimp 0 /* 1028 (XXX IRIX 4 fstat) V*/ - sys irix_pause 0 /* 1029 pause() V*/ - sys sys_utime 2 /* 1030 utime() V*/ - sys irix_unimp 0 /* 1031 nuthin' V*/ - sys irix_unimp 0 /* 1032 nobody home man... V*/ - sys sys_access 2 /* 1033 access() V*/ - sys sys_nice 1 /* 1034 nice() V*/ - sys irix_statfs 2 /* 1035 statfs() V*/ - sys sys_sync 0 /* 1036 sync() V*/ - sys sys_kill 2 /* 1037 kill() V*/ - sys irix_fstatfs 2 /* 1038 fstatfs() V*/ - sys irix_setpgrp 1 /* 1039 setpgrp() V*/ - sys irix_syssgi 0 /* 1040 syssgi() HV*/ - sys sys_dup 1 /* 1041 dup() V*/ - sys sys_pipe 0 /* 1042 pipe() V*/ - sys irix_times 1 /* 1043 times() V*/ - sys irix_unimp 0 /* 1044 XXX profil() IV*/ - sys irix_unimp 0 /* 1045 XXX lock() IV*/ - sys sys_setgid 1 /* 1046 setgid() V*/ - sys irix_getgid 0 /* 1047 getgid() V*/ - sys irix_unimp 0 /* 1048 (XXX IRIX 4 ssig) V*/ - sys irix_msgsys 6 /* 1049 sys_msgsys V*/ - sys sys_sysmips 4 /* 1050 sysmips() HV*/ - sys irix_unimp 0 /* 1051 XXX sysacct() IV*/ - sys irix_shmsys 5 /* 1052 sys_shmsys V*/ - sys irix_semsys 0 /* 1053 sys_semsys V*/ - sys irix_ioctl 3 /* 1054 ioctl() HV*/ - sys irix_uadmin 0 /* 1055 XXX sys_uadmin() HC*/ - sys irix_sysmp 0 /* 1056 sysmp() HV*/ - sys irix_utssys 4 /* 1057 sys_utssys() HV*/ - sys irix_unimp 0 /* 1058 nada enchilada V*/ - sys irix_exece 0 /* 1059 exece() V*/ - sys sys_umask 1 /* 1060 umask() V*/ - sys sys_chroot 1 /* 1061 chroot() V*/ - sys irix_fcntl 3 /* 1062 fcntl() ?V*/ - sys irix_ulimit 2 /* 1063 ulimit() HV*/ - sys irix_unimp 0 /* 1064 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1065 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1066 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1067 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1068 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1069 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1070 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1071 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1072 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1073 XXX AFS shit DC*/ - sys irix_unimp 0 /* 1074 nuttin' V*/ - sys irix_unimp 0 /* 1075 XXX sys_getrlimit64()IV*/ - sys irix_unimp 0 /* 1076 XXX sys_setrlimit64()IV*/ - sys sys_nanosleep 2 /* 1077 nanosleep() V*/ - sys irix_lseek64 5 /* 1078 lseek64() ?V*/ - sys sys_rmdir 1 /* 1079 rmdir() V*/ - sys sys_mkdir 2 /* 1080 mkdir() V*/ - sys sys_getdents 3 /* 1081 getdents() V*/ - sys irix_sginap 1 /* 1082 sys_sginap() V*/ - sys irix_sgikopt 3 /* 1083 sys_sgikopt() DC*/ - sys sys_sysfs 3 /* 1084 sysfs() ?V*/ - sys irix_unimp 0 /* 1085 XXX sys_getmsg() DC*/ - sys irix_unimp 0 /* 1086 XXX sys_putmsg() DC*/ - sys sys_poll 3 /* 1087 poll() V*/ - sys irix_sigreturn 0 /* 1088 sigreturn() ?V*/ - sys sys_accept 3 /* 1089 accept() V*/ - sys sys_bind 3 /* 1090 bind() V*/ - sys sys_connect 3 /* 1091 connect() V*/ - sys irix_gethostid 0 /* 1092 sys_gethostid() ?V*/ - sys sys_getpeername 3 /* 1093 getpeername() V*/ - sys sys_getsockname 3 /* 1094 getsockname() V*/ - sys sys_getsockopt 5 /* 1095 getsockopt() V*/ - sys sys_listen 2 /* 1096 listen() V*/ - sys sys_recv 4 /* 1097 recv() V*/ - sys sys_recvfrom 6 /* 1098 recvfrom() V*/ - sys sys_recvmsg 3 /* 1099 recvmsg() V*/ - sys sys_select 5 /* 1100 select() V*/ - sys sys_send 4 /* 1101 send() V*/ - sys sys_sendmsg 3 /* 1102 sendmsg() V*/ - sys sys_sendto 6 /* 1103 sendto() V*/ - sys irix_sethostid 1 /* 1104 sys_sethostid() ?V*/ - sys sys_setsockopt 5 /* 1105 setsockopt() V*/ - sys sys_shutdown 2 /* 1106 shutdown() ?V*/ - sys irix_socket 3 /* 1107 socket() V*/ - sys sys_gethostname 2 /* 1108 sys_gethostname() ?V*/ - sys sys_sethostname 2 /* 1109 sethostname() ?V*/ - sys irix_getdomainname 2 /* 1110 sys_getdomainname() ?V*/ - sys sys_setdomainname 2 /* 1111 setdomainname() ?V*/ - sys sys_truncate 2 /* 1112 truncate() V*/ - sys sys_ftruncate 2 /* 1113 ftruncate() V*/ - sys sys_rename 2 /* 1114 rename() V*/ - sys sys_symlink 2 /* 1115 symlink() V*/ - sys sys_readlink 3 /* 1116 readlink() V*/ - sys irix_unimp 0 /* 1117 XXX IRIX 4 lstat() DC*/ - sys irix_unimp 0 /* 1118 nothin' V*/ - sys irix_unimp 0 /* 1119 XXX nfs_svc() DC*/ - sys irix_unimp 0 /* 1120 XXX nfs_getfh() DC*/ - sys irix_unimp 0 /* 1121 XXX async_daemon() DC*/ - sys irix_unimp 0 /* 1122 XXX exportfs() DC*/ - sys sys_setregid 2 /* 1123 setregid() V*/ - sys sys_setreuid 2 /* 1124 setreuid() V*/ - sys sys_getitimer 2 /* 1125 getitimer() V*/ - sys sys_setitimer 3 /* 1126 setitimer() V*/ - sys irix_unimp 1 /* 1127 XXX adjtime() IV*/ - sys irix_gettimeofday 1 /* 1128 gettimeofday() V*/ - sys irix_unimp 0 /* 1129 XXX sproc() IV*/ - sys irix_prctl 0 /* 1130 prctl() HV*/ - sys irix_unimp 0 /* 1131 XXX procblk() IV*/ - sys irix_unimp 0 /* 1132 XXX sprocsp() IV*/ - sys irix_unimp 0 /* 1133 XXX sgigsc() IV*/ - sys irix_mmap32 6 /* 1134 mmap() XXXflags? ?V*/ - sys sys_munmap 2 /* 1135 munmap() V*/ - sys sys_mprotect 3 /* 1136 mprotect() V*/ - sys sys_msync 4 /* 1137 msync() V*/ - sys irix_madvise 3 /* 1138 madvise() DC*/ - sys irix_pagelock 3 /* 1139 pagelock() IV*/ - sys irix_getpagesize 0 /* 1140 getpagesize() V*/ - sys irix_quotactl 0 /* 1141 quotactl() V*/ - sys irix_unimp 0 /* 1142 nobody home man V*/ - sys sys_getpgid 1 /* 1143 BSD getpgrp() V*/ - sys irix_BSDsetpgrp 2 /* 1143 BSD setpgrp() V*/ - sys sys_vhangup 0 /* 1144 vhangup() V*/ - sys sys_fsync 1 /* 1145 fsync() V*/ - sys sys_fchdir 1 /* 1146 fchdir() V*/ - sys sys_getrlimit 2 /* 1147 getrlimit() ?V*/ - sys sys_setrlimit 2 /* 1148 setrlimit() ?V*/ - sys sys_cacheflush 3 /* 1150 cacheflush() HV*/ - sys sys_cachectl 3 /* 1151 cachectl() HV*/ - sys sys_fchown 3 /* 1152 fchown() ?V*/ - sys sys_fchmod 2 /* 1153 fchmod() ?V*/ - sys irix_unimp 0 /* 1154 XXX IRIX 4 wait3() V*/ - sys sys_socketpair 4 /* 1155 socketpair() V*/ - sys irix_systeminfo 3 /* 1156 systeminfo() IV*/ - sys irix_uname 1 /* 1157 uname() IV*/ - sys irix_xstat 3 /* 1158 xstat() V*/ - sys irix_lxstat 3 /* 1159 lxstat() V*/ - sys irix_fxstat 3 /* 1160 fxstat() V*/ - sys irix_xmknod 0 /* 1161 xmknod() ?V*/ - sys irix_sigaction 4 /* 1162 sigaction() ?V*/ - sys irix_sigpending 1 /* 1163 sigpending() ?V*/ - sys irix_sigprocmask 3 /* 1164 sigprocmask() ?V*/ - sys irix_sigsuspend 0 /* 1165 sigsuspend() ?V*/ - sys irix_sigpoll_sys 3 /* 1166 sigpoll_sys() IV*/ - sys irix_swapctl 2 /* 1167 swapctl() IV*/ - sys irix_getcontext 0 /* 1168 getcontext() HV*/ - sys irix_setcontext 0 /* 1169 setcontext() HV*/ - sys irix_waitsys 5 /* 1170 waitsys() IV*/ - sys irix_sigstack 2 /* 1171 sigstack() HV*/ - sys irix_sigaltstack 2 /* 1172 sigaltstack() HV*/ - sys irix_sigsendset 2 /* 1173 sigsendset() IV*/ - sys irix_statvfs 2 /* 1174 statvfs() V*/ - sys irix_fstatvfs 2 /* 1175 fstatvfs() V*/ - sys irix_unimp 0 /* 1176 XXX getpmsg() DC*/ - sys irix_unimp 0 /* 1177 XXX putpmsg() DC*/ - sys sys_lchown 3 /* 1178 lchown() V*/ - sys irix_priocntl 0 /* 1179 priocntl() DC*/ - sys irix_sigqueue 4 /* 1180 sigqueue() IV*/ - sys sys_readv 3 /* 1181 readv() V*/ - sys sys_writev 3 /* 1182 writev() V*/ - sys irix_truncate64 4 /* 1183 truncate64() XX32bit HV*/ - sys irix_ftruncate64 4 /* 1184 ftruncate64()XX32bit HV*/ - sys irix_mmap64 0 /* 1185 mmap64() XX32bit HV*/ - sys irix_dmi 0 /* 1186 dmi() DC*/ - sys irix_pread 6 /* 1187 pread() IV*/ - sys irix_pwrite 6 /* 1188 pwrite() IV*/ - sys sys_fsync 1 /* 1189 fdatasync() XXPOSIX HV*/ - sys irix_sgifastpath 7 /* 1190 sgifastpath() WHEEE IV*/ - sys irix_unimp 0 /* 1191 XXX attr_get() DC*/ - sys irix_unimp 0 /* 1192 XXX attr_getf() DC*/ - sys irix_unimp 0 /* 1193 XXX attr_set() DC*/ - sys irix_unimp 0 /* 1194 XXX attr_setf() DC*/ - sys irix_unimp 0 /* 1195 XXX attr_remove() DC*/ - sys irix_unimp 0 /* 1196 XXX attr_removef() DC*/ - sys irix_unimp 0 /* 1197 XXX attr_list() DC*/ - sys irix_unimp 0 /* 1198 XXX attr_listf() DC*/ - sys irix_unimp 0 /* 1199 XXX attr_multi() DC*/ - sys irix_unimp 0 /* 1200 XXX attr_multif() DC*/ - sys irix_statvfs64 2 /* 1201 statvfs64() V*/ - sys irix_fstatvfs64 2 /* 1202 fstatvfs64() V*/ - sys irix_getmountid 2 /* 1203 getmountid()XXXfsids HV*/ - sys irix_nsproc 5 /* 1204 nsproc() IV*/ - sys irix_getdents64 3 /* 1205 getdents64() HV*/ - sys irix_unimp 0 /* 1206 XXX DFS garbage DC*/ - sys irix_ngetdents 4 /* 1207 ngetdents() XXXeop HV*/ - sys irix_ngetdents64 4 /* 1208 ngetdents64() XXXeop HV*/ - sys irix_unimp 0 /* 1209 nothin' V*/ - sys irix_unimp 0 /* 1210 XXX pidsprocsp() */ - sys irix_unimp 0 /* 1211 XXX rexec() */ - sys irix_unimp 0 /* 1212 XXX timer_create() */ - sys irix_unimp 0 /* 1213 XXX timer_delete() */ - sys irix_unimp 0 /* 1214 XXX timer_settime() */ - sys irix_unimp 0 /* 1215 XXX timer_gettime() */ - sys irix_unimp 0 /* 1216 XXX timer_setoverrun() */ - sys sys_sched_rr_get_interval 2 /* 1217 sched_rr_get_interval()V*/ - sys sys_sched_yield 0 /* 1218 sched_yield() V*/ - sys sys_sched_getscheduler 1 /* 1219 sched_getscheduler() V*/ - sys sys_sched_setscheduler 3 /* 1220 sched_setscheduler() V*/ - sys sys_sched_getparam 2 /* 1221 sched_getparam() V*/ - sys sys_sched_setparam 2 /* 1222 sched_setparam() V*/ - sys irix_unimp 0 /* 1223 XXX usync_cntl() */ - sys irix_unimp 0 /* 1224 XXX psema_cntl() */ - sys irix_unimp 0 /* 1225 XXX restartreturn() */ - - /* Just to pad things out nicely. */ - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - sys irix_unimp 0 - - .endm - - /* - * Pre-compute the number of _instruction_ bytes needed to load - * or store the arguments 6-8. Negative values are ignored. - */ - .macro sys function, nargs - PTR \function - LONG (\nargs << 2) - (5 << 2) - .endm - - .align 4 -EXPORT(sys_call_table_irix5) - irix5syscalltable diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c deleted file mode 100644 index 469c7237e5ba..000000000000 --- a/arch/mips/kernel/irixelf.c +++ /dev/null @@ -1,1361 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * irixelf.c: Code to load IRIX ELF executables conforming to the MIPS ABI. - * Based off of work by Eric Youngdale. - * - * Copyright (C) 1993 - 1994 Eric Youngdale - * Copyright (C) 1996 - 2004 David S. Miller - * Copyright (C) 2004 - 2005 Steven J. Hill - */ -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#define DLINFO_ITEMS 12 - -#include - -static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs); -static int load_irix_library(struct file *); -static int irix_core_dump(long signr, struct pt_regs * regs, - struct file *file, unsigned long limit); - -static struct linux_binfmt irix_format = { - .module = THIS_MODULE, - .load_binary = load_irix_binary, - .load_shlib = load_irix_library, - .core_dump = irix_core_dump, - .min_coredump = PAGE_SIZE, -}; - -/* Debugging routines. */ -static char *get_elf_p_type(Elf32_Word p_type) -{ -#ifdef DEBUG - switch (p_type) { - case PT_NULL: - return "PT_NULL"; - break; - - case PT_LOAD: - return "PT_LOAD"; - break; - - case PT_DYNAMIC: - return "PT_DYNAMIC"; - break; - - case PT_INTERP: - return "PT_INTERP"; - break; - - case PT_NOTE: - return "PT_NOTE"; - break; - - case PT_SHLIB: - return "PT_SHLIB"; - break; - - case PT_PHDR: - return "PT_PHDR"; - break; - - case PT_LOPROC: - return "PT_LOPROC/REGINFO"; - break; - - case PT_HIPROC: - return "PT_HIPROC"; - break; - - default: - return "PT_BOGUS"; - break; - } -#endif -} - -static void print_elfhdr(struct elfhdr *ehp) -{ - int i; - - pr_debug("ELFHDR: e_ident<"); - for (i = 0; i < (EI_NIDENT - 1); i++) - pr_debug("%x ", ehp->e_ident[i]); - pr_debug("%x>\n", ehp->e_ident[i]); - pr_debug(" e_type[%04x] e_machine[%04x] e_version[%08lx]\n", - (unsigned short) ehp->e_type, (unsigned short) ehp->e_machine, - (unsigned long) ehp->e_version); - pr_debug(" e_entry[%08lx] e_phoff[%08lx] e_shoff[%08lx] " - "e_flags[%08lx]\n", - (unsigned long) ehp->e_entry, (unsigned long) ehp->e_phoff, - (unsigned long) ehp->e_shoff, (unsigned long) ehp->e_flags); - pr_debug(" e_ehsize[%04x] e_phentsize[%04x] e_phnum[%04x]\n", - (unsigned short) ehp->e_ehsize, - (unsigned short) ehp->e_phentsize, - (unsigned short) ehp->e_phnum); - pr_debug(" e_shentsize[%04x] e_shnum[%04x] e_shstrndx[%04x]\n", - (unsigned short) ehp->e_shentsize, - (unsigned short) ehp->e_shnum, - (unsigned short) ehp->e_shstrndx); -} - -static void print_phdr(int i, struct elf_phdr *ep) -{ - pr_debug("PHDR[%d]: p_type[%s] p_offset[%08lx] p_vaddr[%08lx] " - "p_paddr[%08lx]\n", i, get_elf_p_type(ep->p_type), - (unsigned long) ep->p_offset, (unsigned long) ep->p_vaddr, - (unsigned long) ep->p_paddr); - pr_debug(" p_filesz[%08lx] p_memsz[%08lx] p_flags[%08lx] " - "p_align[%08lx]\n", (unsigned long) ep->p_filesz, - (unsigned long) ep->p_memsz, (unsigned long) ep->p_flags, - (unsigned long) ep->p_align); -} - -static void dump_phdrs(struct elf_phdr *ep, int pnum) -{ - int i; - - for (i = 0; i < pnum; i++, ep++) { - if ((ep->p_type == PT_LOAD) || - (ep->p_type == PT_INTERP) || - (ep->p_type == PT_PHDR)) - print_phdr(i, ep); - } -} - -static void set_brk(unsigned long start, unsigned long end) -{ - start = PAGE_ALIGN(start); - end = PAGE_ALIGN(end); - if (end <= start) - return; - down_write(¤t->mm->mmap_sem); - do_brk(start, end - start); - up_write(¤t->mm->mmap_sem); -} - - -/* We need to explicitly zero any fractional pages - * after the data section (i.e. bss). This would - * contain the junk from the file that should not - * be in memory. - */ -static void padzero(unsigned long elf_bss) -{ - unsigned long nbyte; - - nbyte = elf_bss & (PAGE_SIZE-1); - if (nbyte) { - nbyte = PAGE_SIZE - nbyte; - clear_user((void __user *) elf_bss, nbyte); - } -} - -static unsigned long * create_irix_tables(char * p, int argc, int envc, - struct elfhdr * exec, unsigned int load_addr, - unsigned int interp_load_addr, struct pt_regs *regs, - struct elf_phdr *ephdr) -{ - elf_addr_t *argv; - elf_addr_t *envp; - elf_addr_t *sp, *csp; - - pr_debug("create_irix_tables: p[%p] argc[%d] envc[%d] " - "load_addr[%08x] interp_load_addr[%08x]\n", - p, argc, envc, load_addr, interp_load_addr); - - sp = (elf_addr_t *) (~15UL & (unsigned long) p); - csp = sp; - csp -= exec ? DLINFO_ITEMS*2 : 2; - csp -= envc+1; - csp -= argc+1; - csp -= 1; /* argc itself */ - if ((unsigned long)csp & 15UL) { - sp -= (16UL - ((unsigned long)csp & 15UL)) / sizeof(*sp); - } - - /* - * Put the ELF interpreter info on the stack - */ -#define NEW_AUX_ENT(nr, id, val) \ - __put_user((id), sp+(nr*2)); \ - __put_user((val), sp+(nr*2+1)); \ - - sp -= 2; - NEW_AUX_ENT(0, AT_NULL, 0); - - if (exec) { - sp -= 11*2; - - NEW_AUX_ENT(0, AT_PHDR, load_addr + exec->e_phoff); - NEW_AUX_ENT(1, AT_PHENT, sizeof(struct elf_phdr)); - NEW_AUX_ENT(2, AT_PHNUM, exec->e_phnum); - NEW_AUX_ENT(3, AT_PAGESZ, ELF_EXEC_PAGESIZE); - NEW_AUX_ENT(4, AT_BASE, interp_load_addr); - NEW_AUX_ENT(5, AT_FLAGS, 0); - NEW_AUX_ENT(6, AT_ENTRY, (elf_addr_t) exec->e_entry); - NEW_AUX_ENT(7, AT_UID, (elf_addr_t) current->uid); - NEW_AUX_ENT(8, AT_EUID, (elf_addr_t) current->euid); - NEW_AUX_ENT(9, AT_GID, (elf_addr_t) current->gid); - NEW_AUX_ENT(10, AT_EGID, (elf_addr_t) current->egid); - } -#undef NEW_AUX_ENT - - sp -= envc+1; - envp = sp; - sp -= argc+1; - argv = sp; - - __put_user((elf_addr_t)argc, --sp); - current->mm->arg_start = (unsigned long) p; - while (argc-->0) { - __put_user((unsigned long)p, argv++); - p += strlen_user(p); - } - __put_user((unsigned long) NULL, argv); - current->mm->arg_end = current->mm->env_start = (unsigned long) p; - while (envc-->0) { - __put_user((unsigned long)p, envp++); - p += strlen_user(p); - } - __put_user((unsigned long) NULL, envp); - current->mm->env_end = (unsigned long) p; - return sp; -} - - -/* This is much more generalized than the library routine read function, - * so we keep this separate. Technically the library read function - * is only provided so that we can read a.out libraries that have - * an ELF header. - */ -static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex, - struct file * interpreter, - unsigned int *interp_load_addr) -{ - struct elf_phdr *elf_phdata = NULL; - struct elf_phdr *eppnt; - unsigned int len; - unsigned int load_addr; - int elf_bss; - int retval; - unsigned int last_bss; - int error; - int i; - unsigned int k; - - elf_bss = 0; - last_bss = 0; - error = load_addr = 0; - - print_elfhdr(interp_elf_ex); - - /* First of all, some simple consistency checks */ - if ((interp_elf_ex->e_type != ET_EXEC && - interp_elf_ex->e_type != ET_DYN) || - !interpreter->f_op->mmap) { - printk("IRIX interp has bad e_type %d\n", interp_elf_ex->e_type); - return 0xffffffff; - } - - /* Now read in all of the header information */ - if (sizeof(struct elf_phdr) * interp_elf_ex->e_phnum > PAGE_SIZE) { - printk("IRIX interp header bigger than a page (%d)\n", - (sizeof(struct elf_phdr) * interp_elf_ex->e_phnum)); - return 0xffffffff; - } - - elf_phdata = kmalloc(sizeof(struct elf_phdr) * interp_elf_ex->e_phnum, - GFP_KERNEL); - - if (!elf_phdata) { - printk("Cannot kmalloc phdata for IRIX interp.\n"); - return 0xffffffff; - } - - /* If the size of this structure has changed, then punt, since - * we will be doing the wrong thing. - */ - if (interp_elf_ex->e_phentsize != 32) { - printk("IRIX interp e_phentsize == %d != 32 ", - interp_elf_ex->e_phentsize); - kfree(elf_phdata); - return 0xffffffff; - } - - retval = kernel_read(interpreter, interp_elf_ex->e_phoff, - (char *) elf_phdata, - sizeof(struct elf_phdr) * interp_elf_ex->e_phnum); - - dump_phdrs(elf_phdata, interp_elf_ex->e_phnum); - - eppnt = elf_phdata; - for (i = 0; i < interp_elf_ex->e_phnum; i++, eppnt++) { - if (eppnt->p_type == PT_LOAD) { - int elf_type = MAP_PRIVATE | MAP_DENYWRITE; - int elf_prot = 0; - unsigned long vaddr = 0; - if (eppnt->p_flags & PF_R) - elf_prot = PROT_READ; - if (eppnt->p_flags & PF_W) - elf_prot |= PROT_WRITE; - if (eppnt->p_flags & PF_X) - elf_prot |= PROT_EXEC; - elf_type |= MAP_FIXED; - vaddr = eppnt->p_vaddr; - - pr_debug("INTERP do_mmap" - "(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ", - interpreter, vaddr, - (unsigned long) - (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)), - (unsigned long) - elf_prot, (unsigned long) elf_type, - (unsigned long) - (eppnt->p_offset & 0xfffff000)); - - down_write(¤t->mm->mmap_sem); - error = do_mmap(interpreter, vaddr, - eppnt->p_filesz + (eppnt->p_vaddr & 0xfff), - elf_prot, elf_type, - eppnt->p_offset & 0xfffff000); - up_write(¤t->mm->mmap_sem); - - if (error < 0 && error > -1024) { - printk("Aieee IRIX interp mmap error=%d\n", - error); - break; /* Real error */ - } - pr_debug("error=%08lx ", (unsigned long) error); - if (!load_addr && interp_elf_ex->e_type == ET_DYN) { - load_addr = error; - pr_debug("load_addr = error "); - } - - /* - * Find the end of the file mapping for this phdr, and - * keep track of the largest address we see for this. - */ - k = eppnt->p_vaddr + eppnt->p_filesz; - if (k > elf_bss) - elf_bss = k; - - /* Do the same thing for the memory mapping - between - * elf_bss and last_bss is the bss section. - */ - k = eppnt->p_memsz + eppnt->p_vaddr; - if (k > last_bss) - last_bss = k; - pr_debug("\n"); - } - } - - /* Now use mmap to map the library into memory. */ - if (error < 0 && error > -1024) { - pr_debug("got error %d\n", error); - kfree(elf_phdata); - return 0xffffffff; - } - - /* Now fill out the bss section. First pad the last page up - * to the page boundary, and then perform a mmap to make sure - * that there are zero-mapped pages up to and including the - * last bss page. - */ - pr_debug("padzero(%08lx) ", (unsigned long) (elf_bss)); - padzero(elf_bss); - len = (elf_bss + 0xfff) & 0xfffff000; /* What we have mapped so far */ - - pr_debug("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss, - (unsigned long) len); - - /* Map the last of the bss segment */ - if (last_bss > len) { - down_write(¤t->mm->mmap_sem); - do_brk(len, (last_bss - len)); - up_write(¤t->mm->mmap_sem); - } - kfree(elf_phdata); - - *interp_load_addr = load_addr; - return ((unsigned int) interp_elf_ex->e_entry); -} - -/* Check sanity of IRIX elf executable header. */ -static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm) -{ - if (memcmp(ehp->e_ident, ELFMAG, SELFMAG) != 0) - return -ENOEXEC; - - /* First of all, some simple consistency checks */ - if ((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) || - !bprm->file->f_op->mmap) { - return -ENOEXEC; - } - - /* XXX Don't support N32 or 64bit binaries yet because they can - * XXX and do execute 64 bit instructions and expect all registers - * XXX to be 64 bit as well. We need to make the kernel save - * XXX all registers as 64bits on cpu's capable of this at - * XXX exception time plus frob the XTLB exception vector. - */ - if ((ehp->e_flags & EF_MIPS_ABI2)) - return -ENOEXEC; - - return 0; -} - -/* - * This is where the detailed check is performed. Irix binaries - * use interpreters with 'libc.so' in the name, so this function - * can differentiate between Linux and Irix binaries. - */ -static inline int look_for_irix_interpreter(char **name, - struct file **interpreter, - struct elfhdr *interp_elf_ex, - struct elf_phdr *epp, - struct linux_binprm *bprm, int pnum) -{ - int i; - int retval = -EINVAL; - struct file *file = NULL; - - *name = NULL; - for (i = 0; i < pnum; i++, epp++) { - if (epp->p_type != PT_INTERP) - continue; - - /* It is illegal to have two interpreters for one executable. */ - if (*name != NULL) - goto out; - - *name = kmalloc(epp->p_filesz + strlen(IRIX_EMUL), GFP_KERNEL); - if (!*name) - return -ENOMEM; - - strcpy(*name, IRIX_EMUL); - retval = kernel_read(bprm->file, epp->p_offset, (*name + 16), - epp->p_filesz); - if (retval < 0) - goto out; - - file = open_exec(*name); - if (IS_ERR(file)) { - retval = PTR_ERR(file); - goto out; - } - retval = kernel_read(file, 0, bprm->buf, 128); - if (retval < 0) - goto dput_and_out; - - *interp_elf_ex = *(struct elfhdr *) bprm->buf; - } - *interpreter = file; - return 0; - -dput_and_out: - fput(file); -out: - kfree(*name); - return retval; -} - -static inline int verify_irix_interpreter(struct elfhdr *ihp) -{ - if (memcmp(ihp->e_ident, ELFMAG, SELFMAG) != 0) - return -ELIBBAD; - return 0; -} - -#define EXEC_MAP_FLAGS (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE) - -static inline void map_executable(struct file *fp, struct elf_phdr *epp, int pnum, - unsigned int *estack, unsigned int *laddr, - unsigned int *scode, unsigned int *ebss, - unsigned int *ecode, unsigned int *edata, - unsigned int *ebrk) -{ - unsigned int tmp; - int i, prot; - - for (i = 0; i < pnum; i++, epp++) { - if (epp->p_type != PT_LOAD) - continue; - - /* Map it. */ - prot = (epp->p_flags & PF_R) ? PROT_READ : 0; - prot |= (epp->p_flags & PF_W) ? PROT_WRITE : 0; - prot |= (epp->p_flags & PF_X) ? PROT_EXEC : 0; - down_write(¤t->mm->mmap_sem); - (void) do_mmap(fp, (epp->p_vaddr & 0xfffff000), - (epp->p_filesz + (epp->p_vaddr & 0xfff)), - prot, EXEC_MAP_FLAGS, - (epp->p_offset & 0xfffff000)); - up_write(¤t->mm->mmap_sem); - - /* Fixup location tracking vars. */ - if ((epp->p_vaddr & 0xfffff000) < *estack) - *estack = (epp->p_vaddr & 0xfffff000); - if (!*laddr) - *laddr = epp->p_vaddr - epp->p_offset; - if (epp->p_vaddr < *scode) - *scode = epp->p_vaddr; - - tmp = epp->p_vaddr + epp->p_filesz; - if (tmp > *ebss) - *ebss = tmp; - if ((epp->p_flags & PF_X) && *ecode < tmp) - *ecode = tmp; - if (*edata < tmp) - *edata = tmp; - - tmp = epp->p_vaddr + epp->p_memsz; - if (tmp > *ebrk) - *ebrk = tmp; - } - -} - -static inline int map_interpreter(struct elf_phdr *epp, struct elfhdr *ihp, - struct file *interp, unsigned int *iladdr, - int pnum, mm_segment_t old_fs, - unsigned int *eentry) -{ - int i; - - *eentry = 0xffffffff; - for (i = 0; i < pnum; i++, epp++) { - if (epp->p_type != PT_INTERP) - continue; - - /* We should have fielded this error elsewhere... */ - if (*eentry != 0xffffffff) - return -1; - - set_fs(old_fs); - *eentry = load_irix_interp(ihp, interp, iladdr); - old_fs = get_fs(); - set_fs(get_ds()); - - fput(interp); - - if (*eentry == 0xffffffff) - return -1; - } - return 0; -} - -/* - * IRIX maps a page at 0x200000 that holds information about the - * process and the system, here we map the page and fill the - * structure - */ -static int irix_map_prda_page(void) -{ - unsigned long v; - struct prda *pp; - - down_write(¤t->mm->mmap_sem); - v = do_brk(PRDA_ADDRESS, PAGE_SIZE); - up_write(¤t->mm->mmap_sem); - - if (v != PRDA_ADDRESS) - return v; /* v must be an error code */ - - pp = (struct prda *) v; - pp->prda_sys.t_pid = task_pid_vnr(current); - pp->prda_sys.t_prid = read_c0_prid(); - pp->prda_sys.t_rpid = task_pid_vnr(current); - - /* We leave the rest set to zero */ - - return 0; -} - - - -/* These are the functions used to load ELF style executables and shared - * libraries. There is no binary dependent code anywhere else. - */ -static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs) -{ - struct elfhdr elf_ex, interp_elf_ex; - struct file *interpreter; - struct elf_phdr *elf_phdata, *elf_ihdr, *elf_ephdr; - unsigned int load_addr, elf_bss, elf_brk; - unsigned int elf_entry, interp_load_addr = 0; - unsigned int start_code, end_code, end_data, elf_stack; - int retval, has_interp, has_ephdr, size, i; - char *elf_interpreter; - mm_segment_t old_fs; - - load_addr = 0; - has_interp = has_ephdr = 0; - elf_ihdr = elf_ephdr = NULL; - elf_ex = *((struct elfhdr *) bprm->buf); - retval = -ENOEXEC; - - if (verify_binary(&elf_ex, bprm)) - goto out; - - /* - * Telling -o32 static binaries from Linux and Irix apart from each - * other is difficult. There are 2 differences to be noted for static - * binaries from the 2 operating systems: - * - * 1) Irix binaries have their .text section before their .init - * section. Linux binaries are just the opposite. - * - * 2) Irix binaries usually have <= 12 sections and Linux - * binaries have > 20. - * - * We will use Method #2 since Method #1 would require us to read in - * the section headers which is way too much overhead. This appears - * to work for everything we have ran into so far. If anyone has a - * better method to tell the binaries apart, I'm listening. - */ - if (elf_ex.e_shnum > 20) - goto out; - - print_elfhdr(&elf_ex); - - /* Now read in all of the header information */ - size = elf_ex.e_phentsize * elf_ex.e_phnum; - if (size > 65536) - goto out; - elf_phdata = kmalloc(size, GFP_KERNEL); - if (elf_phdata == NULL) { - retval = -ENOMEM; - goto out; - } - - retval = kernel_read(bprm->file, elf_ex.e_phoff, (char *)elf_phdata, size); - if (retval < 0) - goto out_free_ph; - - dump_phdrs(elf_phdata, elf_ex.e_phnum); - - /* Set some things for later. */ - for (i = 0; i < elf_ex.e_phnum; i++) { - switch (elf_phdata[i].p_type) { - case PT_INTERP: - has_interp = 1; - elf_ihdr = &elf_phdata[i]; - break; - case PT_PHDR: - has_ephdr = 1; - elf_ephdr = &elf_phdata[i]; - break; - }; - } - - pr_debug("\n"); - - elf_bss = 0; - elf_brk = 0; - - elf_stack = 0xffffffff; - elf_interpreter = NULL; - start_code = 0xffffffff; - end_code = 0; - end_data = 0; - - /* - * If we get a return value, we change the value to be ENOEXEC - * so that we can exit gracefully and the main binary format - * search loop in 'fs/exec.c' will move onto the next handler - * which should be the normal ELF binary handler. - */ - retval = look_for_irix_interpreter(&elf_interpreter, &interpreter, - &interp_elf_ex, elf_phdata, bprm, - elf_ex.e_phnum); - if (retval) { - retval = -ENOEXEC; - goto out_free_file; - } - - if (elf_interpreter) { - retval = verify_irix_interpreter(&interp_elf_ex); - if (retval) - goto out_free_interp; - } - - /* OK, we are done with that, now set up the arg stuff, - * and then start this sucker up. - */ - retval = -E2BIG; - if (!bprm->sh_bang && !bprm->p) - goto out_free_interp; - - /* Flush all traces of the currently running executable */ - retval = flush_old_exec(bprm); - if (retval) - goto out_free_dentry; - - /* OK, This is the point of no return */ - current->mm->end_data = 0; - current->mm->end_code = 0; - current->mm->mmap = NULL; - current->flags &= ~PF_FORKNOEXEC; - elf_entry = (unsigned int) elf_ex.e_entry; - - /* Do this so that we can load the interpreter, if need be. We will - * change some of these later. - */ - setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT); - current->mm->start_stack = bprm->p; - - /* At this point, we assume that the image should be loaded at - * fixed address, not at a variable address. - */ - old_fs = get_fs(); - set_fs(get_ds()); - - map_executable(bprm->file, elf_phdata, elf_ex.e_phnum, &elf_stack, - &load_addr, &start_code, &elf_bss, &end_code, - &end_data, &elf_brk); - - if (elf_interpreter) { - retval = map_interpreter(elf_phdata, &interp_elf_ex, - interpreter, &interp_load_addr, - elf_ex.e_phnum, old_fs, &elf_entry); - kfree(elf_interpreter); - if (retval) { - set_fs(old_fs); - printk("Unable to load IRIX ELF interpreter\n"); - send_sig(SIGSEGV, current, 0); - retval = 0; - goto out_free_file; - } - } - - set_fs(old_fs); - - kfree(elf_phdata); - set_personality(PER_IRIX32); - set_binfmt(&irix_format); - compute_creds(bprm); - current->flags &= ~PF_FORKNOEXEC; - bprm->p = (unsigned long) - create_irix_tables((char *)bprm->p, bprm->argc, bprm->envc, - (elf_interpreter ? &elf_ex : NULL), - load_addr, interp_load_addr, regs, elf_ephdr); - current->mm->start_brk = current->mm->brk = elf_brk; - current->mm->end_code = end_code; - current->mm->start_code = start_code; - current->mm->end_data = end_data; - current->mm->start_stack = bprm->p; - - /* Calling set_brk effectively mmaps the pages that we need for the - * bss and break sections. - */ - set_brk(elf_bss, elf_brk); - - /* - * IRIX maps a page at 0x200000 which holds some system - * information. Programs depend on this. - */ - if (irix_map_prda_page()) - goto out_free_dentry; - - padzero(elf_bss); - - pr_debug("(start_brk) %lx\n" , (long) current->mm->start_brk); - pr_debug("(end_code) %lx\n" , (long) current->mm->end_code); - pr_debug("(start_code) %lx\n" , (long) current->mm->start_code); - pr_debug("(end_data) %lx\n" , (long) current->mm->end_data); - pr_debug("(start_stack) %lx\n" , (long) current->mm->start_stack); - pr_debug("(brk) %lx\n" , (long) current->mm->brk); - -#if 0 /* XXX No fucking way dude... */ - /* Why this, you ask??? Well SVr4 maps page 0 as read-only, - * and some applications "depend" upon this behavior. - * Since we do not have the power to recompile these, we - * emulate the SVr4 behavior. Sigh. - */ - down_write(¤t->mm->mmap_sem); - (void) do_mmap(NULL, 0, 4096, PROT_READ | PROT_EXEC, - MAP_FIXED | MAP_PRIVATE, 0); - up_write(¤t->mm->mmap_sem); -#endif - - start_thread(regs, elf_entry, bprm->p); - if (current->ptrace & PT_PTRACED) - send_sig(SIGTRAP, current, 0); - return 0; -out: - return retval; - -out_free_dentry: - allow_write_access(interpreter); - fput(interpreter); -out_free_interp: - kfree(elf_interpreter); -out_free_file: -out_free_ph: - kfree(elf_phdata); - goto out; -} - -/* This is really simpleminded and specialized - we are loading an - * a.out library that is given an ELF header. - */ -static int load_irix_library(struct file *file) -{ - struct elfhdr elf_ex; - struct elf_phdr *elf_phdata = NULL; - unsigned int len = 0; - int elf_bss = 0; - int retval; - unsigned int bss; - int error; - int i, j, k; - - error = kernel_read(file, 0, (char *) &elf_ex, sizeof(elf_ex)); - if (error != sizeof(elf_ex)) - return -ENOEXEC; - - if (memcmp(elf_ex.e_ident, ELFMAG, SELFMAG) != 0) - return -ENOEXEC; - - /* First of all, some simple consistency checks. */ - if (elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 || - !file->f_op->mmap) - return -ENOEXEC; - - /* Now read in all of the header information. */ - if (sizeof(struct elf_phdr) * elf_ex.e_phnum > PAGE_SIZE) - return -ENOEXEC; - - elf_phdata = kmalloc(sizeof(struct elf_phdr) * elf_ex.e_phnum, GFP_KERNEL); - if (elf_phdata == NULL) - return -ENOMEM; - - retval = kernel_read(file, elf_ex.e_phoff, (char *) elf_phdata, - sizeof(struct elf_phdr) * elf_ex.e_phnum); - - j = 0; - for (i=0; ip_type == PT_LOAD) j++; - - if (j != 1) { - kfree(elf_phdata); - return -ENOEXEC; - } - - while (elf_phdata->p_type != PT_LOAD) elf_phdata++; - - /* Now use mmap to map the library into memory. */ - down_write(¤t->mm->mmap_sem); - error = do_mmap(file, - elf_phdata->p_vaddr & 0xfffff000, - elf_phdata->p_filesz + (elf_phdata->p_vaddr & 0xfff), - PROT_READ | PROT_WRITE | PROT_EXEC, - MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE, - elf_phdata->p_offset & 0xfffff000); - up_write(¤t->mm->mmap_sem); - - k = elf_phdata->p_vaddr + elf_phdata->p_filesz; - if (k > elf_bss) elf_bss = k; - - if (error != (elf_phdata->p_vaddr & 0xfffff000)) { - kfree(elf_phdata); - return error; - } - - padzero(elf_bss); - - len = (elf_phdata->p_filesz + elf_phdata->p_vaddr+ 0xfff) & 0xfffff000; - bss = elf_phdata->p_memsz + elf_phdata->p_vaddr; - if (bss > len) { - down_write(¤t->mm->mmap_sem); - do_brk(len, bss-len); - up_write(¤t->mm->mmap_sem); - } - kfree(elf_phdata); - return 0; -} - -/* Called through irix_syssgi() to map an elf image given an FD, - * a phdr ptr USER_PHDRP in userspace, and a count CNT telling how many - * phdrs there are in the USER_PHDRP array. We return the vaddr the - * first phdr was successfully mapped to. - */ -unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt) -{ - unsigned long type, vaddr, filesz, offset, flags; - struct elf_phdr __user *hp; - struct file *filp; - int i, retval; - - pr_debug("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n", - fd, user_phdrp, cnt); - - /* First get the verification out of the way. */ - hp = user_phdrp; - if (!access_ok(VERIFY_READ, hp, (sizeof(struct elf_phdr) * cnt))) { - pr_debug("irix_mapelf: bad pointer to ELF PHDR!\n"); - - return -EFAULT; - } - - dump_phdrs(user_phdrp, cnt); - - for (i = 0; i < cnt; i++, hp++) { - if (__get_user(type, &hp->p_type)) - return -EFAULT; - if (type != PT_LOAD) { - printk("irix_mapelf: One section is not PT_LOAD!\n"); - return -ENOEXEC; - } - } - - filp = fget(fd); - if (!filp) - return -EACCES; - if (!filp->f_op) { - printk("irix_mapelf: Bogon filp!\n"); - fput(filp); - return -EACCES; - } - - hp = user_phdrp; - for (i = 0; i < cnt; i++, hp++) { - int prot; - - retval = __get_user(vaddr, &hp->p_vaddr); - retval |= __get_user(filesz, &hp->p_filesz); - retval |= __get_user(offset, &hp->p_offset); - retval |= __get_user(flags, &hp->p_flags); - if (retval) - return retval; - - prot = (flags & PF_R) ? PROT_READ : 0; - prot |= (flags & PF_W) ? PROT_WRITE : 0; - prot |= (flags & PF_X) ? PROT_EXEC : 0; - - down_write(¤t->mm->mmap_sem); - retval = do_mmap(filp, (vaddr & 0xfffff000), - (filesz + (vaddr & 0xfff)), - prot, (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE), - (offset & 0xfffff000)); - up_write(¤t->mm->mmap_sem); - - if (retval != (vaddr & 0xfffff000)) { - printk("irix_mapelf: do_mmap fails with %d!\n", retval); - fput(filp); - return retval; - } - } - - pr_debug("irix_mapelf: Success, returning %08lx\n", - (unsigned long) user_phdrp->p_vaddr); - - fput(filp); - - if (__get_user(vaddr, &user_phdrp->p_vaddr)) - return -EFAULT; - - return vaddr; -} - -/* - * ELF core dumper - * - * Modelled on fs/exec.c:aout_core_dump() - * Jeremy Fitzhardinge - */ - -/* These are the only things you should do on a core-file: use only these - * functions to write out all the necessary info. - */ -static int dump_write(struct file *file, const void __user *addr, int nr) -{ - return file->f_op->write(file, (const char __user *) addr, nr, &file->f_pos) == nr; -} - -static int dump_seek(struct file *file, off_t off) -{ - if (file->f_op->llseek) { - if (file->f_op->llseek(file, off, 0) != off) - return 0; - } else - file->f_pos = off; - return 1; -} - -/* Decide whether a segment is worth dumping; default is yes to be - * sure (missing info is worse than too much; etc). - * Personally I'd include everything, and use the coredump limit... - * - * I think we should skip something. But I am not sure how. H.J. - */ -static inline int maydump(struct vm_area_struct *vma) -{ - if (!(vma->vm_flags & (VM_READ|VM_WRITE|VM_EXEC))) - return 0; -#if 1 - if (vma->vm_flags & (VM_WRITE|VM_GROWSUP|VM_GROWSDOWN)) - return 1; - if (vma->vm_flags & (VM_READ|VM_EXEC|VM_EXECUTABLE|VM_SHARED)) - return 0; -#endif - return 1; -} - -/* An ELF note in memory. */ -struct memelfnote -{ - const char *name; - int type; - unsigned int datasz; - void *data; -}; - -static int notesize(struct memelfnote *en) -{ - int sz; - - sz = sizeof(struct elf_note); - sz += roundup(strlen(en->name) + 1, 4); - sz += roundup(en->datasz, 4); - - return sz; -} - -#define DUMP_WRITE(addr, nr) \ - if (!dump_write(file, (addr), (nr))) \ - goto end_coredump; -#define DUMP_SEEK(off) \ - if (!dump_seek(file, (off))) \ - goto end_coredump; - -static int writenote(struct memelfnote *men, struct file *file) -{ - struct elf_note en; - - en.n_namesz = strlen(men->name) + 1; - en.n_descsz = men->datasz; - en.n_type = men->type; - - DUMP_WRITE(&en, sizeof(en)); - DUMP_WRITE(men->name, en.n_namesz); - /* XXX - cast from long long to long to avoid need for libgcc.a */ - DUMP_SEEK(roundup((unsigned long)file->f_pos, 4)); /* XXX */ - DUMP_WRITE(men->data, men->datasz); - DUMP_SEEK(roundup((unsigned long)file->f_pos, 4)); /* XXX */ - - return 1; - -end_coredump: - return 0; -} -#undef DUMP_WRITE -#undef DUMP_SEEK - -#define DUMP_WRITE(addr, nr) \ - if (!dump_write(file, (addr), (nr))) \ - goto end_coredump; -#define DUMP_SEEK(off) \ - if (!dump_seek(file, (off))) \ - goto end_coredump; - -/* Actual dumper. - * - * This is a two-pass process; first we find the offsets of the bits, - * and then they are actually written out. If we run out of core limit - * we just truncate. - */ -static int irix_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit) -{ - int has_dumped = 0; - mm_segment_t fs; - int segs; - int i; - size_t size; - struct vm_area_struct *vma; - struct elfhdr elf; - off_t offset = 0, dataoff; - int numnote = 3; - struct memelfnote notes[3]; - struct elf_prstatus prstatus; /* NT_PRSTATUS */ - elf_fpregset_t fpu; /* NT_PRFPREG */ - struct elf_prpsinfo psinfo; /* NT_PRPSINFO */ - - /* Count what's needed to dump, up to the limit of coredump size. */ - segs = 0; - size = 0; - for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) { - if (maydump(vma)) - { - int sz = vma->vm_end-vma->vm_start; - - if (size+sz >= limit) - break; - else - size += sz; - } - - segs++; - } - pr_debug("irix_core_dump: %d segs taking %d bytes\n", segs, size); - - /* Set up header. */ - memcpy(elf.e_ident, ELFMAG, SELFMAG); - elf.e_ident[EI_CLASS] = ELFCLASS32; - elf.e_ident[EI_DATA] = ELFDATA2LSB; - elf.e_ident[EI_VERSION] = EV_CURRENT; - elf.e_ident[EI_OSABI] = ELF_OSABI; - memset(elf.e_ident+EI_PAD, 0, EI_NIDENT-EI_PAD); - - elf.e_type = ET_CORE; - elf.e_machine = ELF_ARCH; - elf.e_version = EV_CURRENT; - elf.e_entry = 0; - elf.e_phoff = sizeof(elf); - elf.e_shoff = 0; - elf.e_flags = 0; - elf.e_ehsize = sizeof(elf); - elf.e_phentsize = sizeof(struct elf_phdr); - elf.e_phnum = segs+1; /* Include notes. */ - elf.e_shentsize = 0; - elf.e_shnum = 0; - elf.e_shstrndx = 0; - - fs = get_fs(); - set_fs(KERNEL_DS); - - has_dumped = 1; - current->flags |= PF_DUMPCORE; - - DUMP_WRITE(&elf, sizeof(elf)); - offset += sizeof(elf); /* Elf header. */ - offset += (segs+1) * sizeof(struct elf_phdr); /* Program headers. */ - - /* Set up the notes in similar form to SVR4 core dumps made - * with info from their /proc. - */ - memset(&psinfo, 0, sizeof(psinfo)); - memset(&prstatus, 0, sizeof(prstatus)); - - notes[0].name = "CORE"; - notes[0].type = NT_PRSTATUS; - notes[0].datasz = sizeof(prstatus); - notes[0].data = &prstatus; - prstatus.pr_info.si_signo = prstatus.pr_cursig = signr; - prstatus.pr_sigpend = current->pending.signal.sig[0]; - prstatus.pr_sighold = current->blocked.sig[0]; - psinfo.pr_pid = prstatus.pr_pid = task_pid_vnr(current); - psinfo.pr_ppid = prstatus.pr_ppid = task_pid_vnr(current->parent); - psinfo.pr_pgrp = prstatus.pr_pgrp = task_pgrp_vnr(current); - psinfo.pr_sid = prstatus.pr_sid = task_session_vnr(current); - if (thread_group_leader(current)) { - /* - * This is the record for the group leader. Add in the - * cumulative times of previous dead threads. This total - * won't include the time of each live thread whose state - * is included in the core dump. The final total reported - * to our parent process when it calls wait4 will include - * those sums as well as the little bit more time it takes - * this and each other thread to finish dying after the - * core dump synchronization phase. - */ - jiffies_to_timeval(current->utime + current->signal->utime, - &prstatus.pr_utime); - jiffies_to_timeval(current->stime + current->signal->stime, - &prstatus.pr_stime); - } else { - jiffies_to_timeval(current->utime, &prstatus.pr_utime); - jiffies_to_timeval(current->stime, &prstatus.pr_stime); - } - jiffies_to_timeval(current->signal->cutime, &prstatus.pr_cutime); - jiffies_to_timeval(current->signal->cstime, &prstatus.pr_cstime); - - if (sizeof(elf_gregset_t) != sizeof(struct pt_regs)) { - printk("sizeof(elf_gregset_t) (%d) != sizeof(struct pt_regs) " - "(%d)\n", sizeof(elf_gregset_t), sizeof(struct pt_regs)); - } else { - *(struct pt_regs *)&prstatus.pr_reg = *regs; - } - - notes[1].name = "CORE"; - notes[1].type = NT_PRPSINFO; - notes[1].datasz = sizeof(psinfo); - notes[1].data = &psinfo; - i = current->state ? ffz(~current->state) + 1 : 0; - psinfo.pr_state = i; - psinfo.pr_sname = (i < 0 || i > 5) ? '.' : "RSDZTD"[i]; - psinfo.pr_zomb = psinfo.pr_sname == 'Z'; - psinfo.pr_nice = task_nice(current); - psinfo.pr_flag = current->flags; - psinfo.pr_uid = current->uid; - psinfo.pr_gid = current->gid; - { - int i, len; - - set_fs(fs); - - len = current->mm->arg_end - current->mm->arg_start; - len = len >= ELF_PRARGSZ ? ELF_PRARGSZ : len; - (void *) copy_from_user(&psinfo.pr_psargs, - (const char __user *)current->mm->arg_start, len); - for (i = 0; i < len; i++) - if (psinfo.pr_psargs[i] == 0) - psinfo.pr_psargs[i] = ' '; - psinfo.pr_psargs[len] = 0; - - set_fs(KERNEL_DS); - } - strlcpy(psinfo.pr_fname, current->comm, sizeof(psinfo.pr_fname)); - - /* Try to dump the FPU. */ - prstatus.pr_fpvalid = dump_fpu(regs, &fpu); - if (!prstatus.pr_fpvalid) { - numnote--; - } else { - notes[2].name = "CORE"; - notes[2].type = NT_PRFPREG; - notes[2].datasz = sizeof(fpu); - notes[2].data = &fpu; - } - - /* Write notes phdr entry. */ - { - struct elf_phdr phdr; - int sz = 0; - - for (i = 0; i < numnote; i++) - sz += notesize(¬es[i]); - - phdr.p_type = PT_NOTE; - phdr.p_offset = offset; - phdr.p_vaddr = 0; - phdr.p_paddr = 0; - phdr.p_filesz = sz; - phdr.p_memsz = 0; - phdr.p_flags = 0; - phdr.p_align = 0; - - offset += phdr.p_filesz; - DUMP_WRITE(&phdr, sizeof(phdr)); - } - - /* Page-align dumped data. */ - dataoff = offset = roundup(offset, PAGE_SIZE); - - /* Write program headers for segments dump. */ - for (vma = current->mm->mmap, i = 0; - i < segs && vma != NULL; vma = vma->vm_next) { - struct elf_phdr phdr; - size_t sz; - - i++; - - sz = vma->vm_end - vma->vm_start; - - phdr.p_type = PT_LOAD; - phdr.p_offset = offset; - phdr.p_vaddr = vma->vm_start; - phdr.p_paddr = 0; - phdr.p_filesz = maydump(vma) ? sz : 0; - phdr.p_memsz = sz; - offset += phdr.p_filesz; - phdr.p_flags = vma->vm_flags & VM_READ ? PF_R : 0; - if (vma->vm_flags & VM_WRITE) - phdr.p_flags |= PF_W; - if (vma->vm_flags & VM_EXEC) - phdr.p_flags |= PF_X; - phdr.p_align = PAGE_SIZE; - - DUMP_WRITE(&phdr, sizeof(phdr)); - } - - for (i = 0; i < numnote; i++) - if (!writenote(¬es[i], file)) - goto end_coredump; - - set_fs(fs); - - DUMP_SEEK(dataoff); - - for (i = 0, vma = current->mm->mmap; - i < segs && vma != NULL; - vma = vma->vm_next) { - unsigned long addr = vma->vm_start; - unsigned long len = vma->vm_end - vma->vm_start; - - if (!maydump(vma)) - continue; - i++; - pr_debug("elf_core_dump: writing %08lx %lx\n", addr, len); - DUMP_WRITE((void __user *)addr, len); - } - - if ((off_t) file->f_pos != offset) { - /* Sanity check. */ - printk("elf_core_dump: file->f_pos (%ld) != offset (%ld)\n", - (off_t) file->f_pos, offset); - } - -end_coredump: - set_fs(fs); - return has_dumped; -} - -static int __init init_irix_binfmt(void) -{ - extern int init_inventory(void); - extern asmlinkage unsigned long sys_call_table; - extern asmlinkage unsigned long sys_call_table_irix5; - - init_inventory(); - - /* - * Copy the IRIX5 syscall table (8000 bytes) into the main syscall - * table. The IRIX5 calls are located by an offset of 8000 bytes - * from the beginning of the main table. - */ - memcpy((void *) ((unsigned long) &sys_call_table + 8000), - &sys_call_table_irix5, 8000); - - return register_binfmt(&irix_format); -} - -static void __exit exit_irix_binfmt(void) -{ - /* - * Remove the Irix ELF loader. - */ - unregister_binfmt(&irix_format); -} - -module_init(init_irix_binfmt) -module_exit(exit_irix_binfmt) diff --git a/arch/mips/kernel/irixinv.c b/arch/mips/kernel/irixinv.c deleted file mode 100644 index cf2dcd3d6a93..000000000000 --- a/arch/mips/kernel/irixinv.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Support the inventory interface for IRIX binaries - * This is invoked before the mm layer is working, so we do not - * use the linked lists for the inventory yet. - * - * Miguel de Icaza, 1997. - */ -#include -#include -#include - -#define MAX_INVENTORY 50 -int inventory_items = 0; - -static inventory_t inventory [MAX_INVENTORY]; - -void add_to_inventory(int class, int type, int controller, int unit, int state) -{ - inventory_t *ni = &inventory [inventory_items]; - - if (inventory_items == MAX_INVENTORY) - return; - - ni->inv_class = class; - ni->inv_type = type; - ni->inv_controller = controller; - ni->inv_unit = unit; - ni->inv_state = state; - ni->inv_next = ni; - inventory_items++; -} - -int dump_inventory_to_user(void __user *userbuf, int size) -{ - inventory_t *inv = &inventory [0]; - inventory_t __user *user = userbuf; - int v; - - if (!access_ok(VERIFY_WRITE, userbuf, size)) - return -EFAULT; - - for (v = 0; v < inventory_items; v++){ - inv = &inventory [v]; - if (copy_to_user (user, inv, sizeof (inventory_t))) - return -EFAULT; - user++; - } - return inventory_items * sizeof(inventory_t); -} - -int __init init_inventory(void) -{ - /* - * gross hack while we put the right bits all over the kernel - * most likely this will not let just anyone run the X server - * until we put the right values all over the place - */ - add_to_inventory(10, 3, 0, 0, 16400); - add_to_inventory(1, 1, 150, -1, 12); - add_to_inventory(1, 3, 0, 0, 8976); - add_to_inventory(1, 2, 0, 0, 8976); - add_to_inventory(4, 8, 0, 0, 2); - add_to_inventory(5, 5, 0, 0, 1); - add_to_inventory(3, 3, 0, 0, 32768); - add_to_inventory(3, 4, 0, 0, 32768); - add_to_inventory(3, 8, 0, 0, 524288); - add_to_inventory(3, 9, 0, 0, 64); - add_to_inventory(3, 1, 0, 0, 67108864); - add_to_inventory(12, 3, 0, 0, 16); - add_to_inventory(8, 7, 17, 0, 16777472); - add_to_inventory(8, 0, 0, 0, 1); - add_to_inventory(2, 1, 0, 13, 2); - add_to_inventory(2, 2, 0, 2, 0); - add_to_inventory(2, 2, 0, 1, 0); - add_to_inventory(7, 14, 0, 0, 6); - - return 0; -} diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c deleted file mode 100644 index b39bdba82e02..000000000000 --- a/arch/mips/kernel/irixioctl.c +++ /dev/null @@ -1,213 +0,0 @@ -/* - * irixioctl.c: A fucking mess... - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#undef DEBUG_IOCTLS -#undef DEBUG_MISSING_IOCTL - -struct irix_termios { - tcflag_t c_iflag, c_oflag, c_cflag, c_lflag; - cc_t c_cc[NCCS]; -}; - -asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg) -{ - struct tty_struct *tp, *rtp; - mm_segment_t old_fs; - int i, error = 0; - -#ifdef DEBUG_IOCTLS - printk("[%s:%d] irix_ioctl(%d, ", current->comm, current->pid, fd); -#endif - switch(cmd) { - case 0x00005401: -#ifdef DEBUG_IOCTLS - printk("TCGETA, %08lx) ", arg); -#endif - error = sys_ioctl(fd, TCGETA, arg); - break; - - case 0x0000540d: { - struct termios kt; - struct irix_termios __user *it = - (struct irix_termios __user *) arg; - -#ifdef DEBUG_IOCTLS - printk("TCGETS, %08lx) ", arg); -#endif - if (!access_ok(VERIFY_WRITE, it, sizeof(*it))) { - error = -EFAULT; - break; - } - old_fs = get_fs(); set_fs(get_ds()); - error = sys_ioctl(fd, TCGETS, (unsigned long) &kt); - set_fs(old_fs); - if (error) - break; - - error = __put_user(kt.c_iflag, &it->c_iflag); - error |= __put_user(kt.c_oflag, &it->c_oflag); - error |= __put_user(kt.c_cflag, &it->c_cflag); - error |= __put_user(kt.c_lflag, &it->c_lflag); - - for (i = 0; i < NCCS; i++) - error |= __put_user(kt.c_cc[i], &it->c_cc[i]); - break; - } - - case 0x0000540e: { - struct termios kt; - struct irix_termios *it = (struct irix_termios *) arg; - -#ifdef DEBUG_IOCTLS - printk("TCSETS, %08lx) ", arg); -#endif - if (!access_ok(VERIFY_READ, it, sizeof(*it))) { - error = -EFAULT; - break; - } - old_fs = get_fs(); set_fs(get_ds()); - error = sys_ioctl(fd, TCGETS, (unsigned long) &kt); - set_fs(old_fs); - if (error) - break; - - error = __get_user(kt.c_iflag, &it->c_iflag); - error |= __get_user(kt.c_oflag, &it->c_oflag); - error |= __get_user(kt.c_cflag, &it->c_cflag); - error |= __get_user(kt.c_lflag, &it->c_lflag); - - for (i = 0; i < NCCS; i++) - error |= __get_user(kt.c_cc[i], &it->c_cc[i]); - - if (error) - break; - old_fs = get_fs(); set_fs(get_ds()); - error = sys_ioctl(fd, TCSETS, (unsigned long) &kt); - set_fs(old_fs); - break; - } - - case 0x0000540f: -#ifdef DEBUG_IOCTLS - printk("TCSETSW, %08lx) ", arg); -#endif - error = sys_ioctl(fd, TCSETSW, arg); - break; - - case 0x00005471: -#ifdef DEBUG_IOCTLS - printk("TIOCNOTTY, %08lx) ", arg); -#endif - error = sys_ioctl(fd, TIOCNOTTY, arg); - break; - - case 0x00007416: { - pid_t pid; -#ifdef DEBUG_IOCTLS - printk("TIOCGSID, %08lx) ", arg); -#endif - old_fs = get_fs(); set_fs(get_ds()); - error = sys_ioctl(fd, TIOCGSID, (unsigned long)&pid); - set_fs(old_fs); - if (!error) - error = put_user(pid, (unsigned long __user *) arg); - break; - } - case 0x746e: - /* TIOCSTART, same effect as hitting ^Q */ -#ifdef DEBUG_IOCTLS - printk("TIOCSTART, %08lx) ", arg); -#endif - error = sys_ioctl(fd, TCXONC, TCOON); - break; - - case 0x20006968: -#ifdef DEBUG_IOCTLS - printk("SIOCGETLABEL, %08lx) ", arg); -#endif - error = -ENOPKG; - break; - - case 0x40047477: -#ifdef DEBUG_IOCTLS - printk("TIOCGPGRP, %08lx) ", arg); -#endif - error = sys_ioctl(fd, TIOCGPGRP, arg); -#ifdef DEBUG_IOCTLS - printk("arg=%d ", *(int *)arg); -#endif - break; - - case 0x40087468: -#ifdef DEBUG_IOCTLS - printk("TIOCGWINSZ, %08lx) ", arg); -#endif - error = sys_ioctl(fd, TIOCGWINSZ, arg); - break; - - case 0x8004667e: - error = sys_ioctl(fd, FIONBIO, arg); - break; - - case 0x80047476: - error = sys_ioctl(fd, TIOCSPGRP, arg); - break; - - case 0x8020690c: - error = sys_ioctl(fd, SIOCSIFADDR, arg); - break; - - case 0x80206910: - error = sys_ioctl(fd, SIOCSIFFLAGS, arg); - break; - - case 0xc0206911: - error = sys_ioctl(fd, SIOCGIFFLAGS, arg); - break; - - case 0xc020691b: - error = sys_ioctl(fd, SIOCGIFMETRIC, arg); - break; - - default: { -#ifdef DEBUG_MISSING_IOCTL - char *msg = "Unimplemented IOCTL cmd tell linux-mips@linux-mips.org\n"; - -#ifdef DEBUG_IOCTLS - printk("UNIMP_IOCTL, %08lx)\n", arg); -#endif - old_fs = get_fs(); set_fs(get_ds()); - sys_write(2, msg, strlen(msg)); - set_fs(old_fs); - printk("[%s:%d] Does unimplemented IRIX ioctl cmd %08lx\n", - current->comm, current->pid, cmd); - do_exit(255); -#else - error = sys_ioctl(fd, cmd, arg); -#endif - } - - }; -#ifdef DEBUG_IOCTLS - printk("error=%d\n", error); -#endif - return error; -} diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c deleted file mode 100644 index 0215c805a592..000000000000 --- a/arch/mips/kernel/irixsig.c +++ /dev/null @@ -1,888 +0,0 @@ -/* - * irixsig.c: WHEEE, IRIX signals! YOW, am I compatible or what?!?! - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - * Copyright (C) 1997 - 2000 Ralf Baechle (ralf@gnu.org) - * Copyright (C) 2000 Silicon Graphics, Inc. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#undef DEBUG_SIG - -#define _S(nr) (1<<((nr)-1)) - -#define _BLOCKABLE (~(_S(SIGKILL) | _S(SIGSTOP))) - -#define _IRIX_NSIG 128 -#define _IRIX_NSIG_BPW BITS_PER_LONG -#define _IRIX_NSIG_WORDS (_IRIX_NSIG / _IRIX_NSIG_BPW) - -typedef struct { - unsigned long sig[_IRIX_NSIG_WORDS]; -} irix_sigset_t; - -struct sigctx_irix5 { - u32 rmask, cp0_status; - u64 pc; - u64 regs[32]; - u64 fpregs[32]; - u32 usedfp, fpcsr, fpeir, sstk_flags; - u64 hi, lo; - u64 cp0_cause, cp0_badvaddr, _unused0; - irix_sigset_t sigset; - u64 weird_fpu_thing; - u64 _unused1[31]; -}; - -#ifdef DEBUG_SIG -/* Debugging */ -static inline void dump_irix5_sigctx(struct sigctx_irix5 *c) -{ - int i; - - printk("misc: rmask[%08lx] status[%08lx] pc[%08lx]\n", - (unsigned long) c->rmask, - (unsigned long) c->cp0_status, - (unsigned long) c->pc); - printk("regs: "); - for(i = 0; i < 16; i++) - printk("[%d]<%08lx> ", i, (unsigned long) c->regs[i]); - printk("\nregs: "); - for(i = 16; i < 32; i++) - printk("[%d]<%08lx> ", i, (unsigned long) c->regs[i]); - printk("\nfpregs: "); - for(i = 0; i < 16; i++) - printk("[%d]<%08lx> ", i, (unsigned long) c->fpregs[i]); - printk("\nfpregs: "); - for(i = 16; i < 32; i++) - printk("[%d]<%08lx> ", i, (unsigned long) c->fpregs[i]); - printk("misc: usedfp[%d] fpcsr[%08lx] fpeir[%08lx] stk_flgs[%08lx]\n", - (int) c->usedfp, (unsigned long) c->fpcsr, - (unsigned long) c->fpeir, (unsigned long) c->sstk_flags); - printk("misc: hi[%08lx] lo[%08lx] cause[%08lx] badvaddr[%08lx]\n", - (unsigned long) c->hi, (unsigned long) c->lo, - (unsigned long) c->cp0_cause, (unsigned long) c->cp0_badvaddr); - printk("misc: sigset<0>[%08lx] sigset<1>[%08lx] sigset<2>[%08lx] " - "sigset<3>[%08lx]\n", (unsigned long) c->sigset.sig[0], - (unsigned long) c->sigset.sig[1], - (unsigned long) c->sigset.sig[2], - (unsigned long) c->sigset.sig[3]); -} -#endif - -static int setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs, - int signr, sigset_t *oldmask) -{ - struct sigctx_irix5 __user *ctx; - unsigned long sp; - int error, i; - - sp = regs->regs[29]; - sp -= sizeof(struct sigctx_irix5); - sp &= ~(0xf); - ctx = (struct sigctx_irix5 __user *) sp; - if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx))) - goto segv_and_exit; - - error = __put_user(0, &ctx->weird_fpu_thing); - error |= __put_user(~(0x00000001), &ctx->rmask); - error |= __put_user(0, &ctx->regs[0]); - for(i = 1; i < 32; i++) - error |= __put_user((u64) regs->regs[i], &ctx->regs[i]); - - error |= __put_user((u64) regs->hi, &ctx->hi); - error |= __put_user((u64) regs->lo, &ctx->lo); - error |= __put_user((u64) regs->cp0_epc, &ctx->pc); - error |= __put_user(!!used_math(), &ctx->usedfp); - error |= __put_user((u64) regs->cp0_cause, &ctx->cp0_cause); - error |= __put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr); - - error |= __put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */ - - error |= __copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t)) ? -EFAULT : 0; - - if (error) - goto segv_and_exit; - -#ifdef DEBUG_SIG - dump_irix5_sigctx(ctx); -#endif - - regs->regs[4] = (unsigned long) signr; - regs->regs[5] = 0; /* XXX sigcode XXX */ - regs->regs[6] = regs->regs[29] = sp; - regs->regs[7] = (unsigned long) ka->sa.sa_handler; - regs->regs[25] = regs->cp0_epc = (unsigned long) ka->sa_restorer; - - return 1; - -segv_and_exit: - force_sigsegv(signr, current); - return 0; -} - -static int inline -setup_irix_rt_frame(struct k_sigaction * ka, struct pt_regs *regs, - int signr, sigset_t *oldmask, siginfo_t *info) -{ - printk("Aiee: setup_tr_frame wants to be written"); - do_exit(SIGSEGV); -} - -static inline int handle_signal(unsigned long sig, siginfo_t *info, - struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs) -{ - int ret; - - switch(regs->regs[0]) { - case ERESTARTNOHAND: - regs->regs[2] = EINTR; - break; - case ERESTARTSYS: - if(!(ka->sa.sa_flags & SA_RESTART)) { - regs->regs[2] = EINTR; - break; - } - /* fallthrough */ - case ERESTARTNOINTR: /* Userland will reload $v0. */ - regs->cp0_epc -= 8; - } - - regs->regs[0] = 0; /* Don't deal with this again. */ - - if (ka->sa.sa_flags & SA_SIGINFO) - ret = setup_irix_rt_frame(ka, regs, sig, oldset, info); - else - ret = setup_irix_frame(ka, regs, sig, oldset); - - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked, sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - return ret; -} - -void do_irix_signal(struct pt_regs *regs) -{ - struct k_sigaction ka; - siginfo_t info; - int signr; - sigset_t *oldset; - - /* - * We want the common case to go fast, which is why we may in certain - * cases get here from kernel mode. Just return without doing anything - * if so. - */ - if (!user_mode(regs)) - return; - - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - oldset = ¤t->saved_sigmask; - else - oldset = ¤t->blocked; - - signr = get_signal_to_deliver(&info, &ka, regs, NULL); - if (signr > 0) { - /* Whee! Actually deliver the signal. */ - if (handle_signal(signr, &info, &ka, oldset, regs) == 0) { - /* a signal was successfully delivered; the saved - * sigmask will have been stored in the signal frame, - * and will be restored by sigreturn, so we can simply - * clear the TIF_RESTORE_SIGMASK flag */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); - } - - return; - } - - /* - * Who's code doesn't conform to the restartable syscall convention - * dies here!!! The li instruction, a single machine instruction, - * must directly be followed by the syscall instruction. - */ - if (regs->regs[0]) { - if (regs->regs[2] == ERESTARTNOHAND || - regs->regs[2] == ERESTARTSYS || - regs->regs[2] == ERESTARTNOINTR) { - regs->cp0_epc -= 8; - } - if (regs->regs[2] == ERESTART_RESTARTBLOCK) { - regs->regs[2] = __NR_restart_syscall; - regs->regs[7] = regs->regs[26]; - regs->cp0_epc -= 4; - } - regs->regs[0] = 0; /* Don't deal with this again. */ - } - - /* - * If there's no signal to deliver, we just put the saved sigmask - * back - */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) { - clear_thread_flag(TIF_RESTORE_SIGMASK); - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); - } -} - -asmlinkage void -irix_sigreturn(struct pt_regs *regs) -{ - struct sigctx_irix5 __user *context, *magic; - unsigned long umask, mask; - u64 *fregs; - u32 usedfp; - int error, sig, i, base = 0; - sigset_t blocked; - - /* Always make any pending restarted system calls return -EINTR */ - current_thread_info()->restart_block.fn = do_no_restart_syscall; - - if (regs->regs[2] == 1000) - base = 1; - - context = (struct sigctx_irix5 __user *) regs->regs[base + 4]; - magic = (struct sigctx_irix5 __user *) regs->regs[base + 5]; - sig = (int) regs->regs[base + 6]; -#ifdef DEBUG_SIG - printk("[%s:%d] IRIX sigreturn(scp[%p],ucp[%p],sig[%d])\n", - current->comm, current->pid, context, magic, sig); -#endif - if (!context) - context = magic; - if (!access_ok(VERIFY_READ, context, sizeof(struct sigctx_irix5))) - goto badframe; - -#ifdef DEBUG_SIG - dump_irix5_sigctx(context); -#endif - - error = __get_user(regs->cp0_epc, &context->pc); - error |= __get_user(umask, &context->rmask); - - mask = 2; - for (i = 1; i < 32; i++, mask <<= 1) { - if (umask & mask) - error |= __get_user(regs->regs[i], &context->regs[i]); - } - error |= __get_user(regs->hi, &context->hi); - error |= __get_user(regs->lo, &context->lo); - - error |= __get_user(usedfp, &context->usedfp); - if ((umask & 1) && usedfp) { - fregs = (u64 *) ¤t->thread.fpu; - - for(i = 0; i < 32; i++) - error |= __get_user(fregs[i], &context->fpregs[i]); - error |= __get_user(current->thread.fpu.fcr31, &context->fpcsr); - } - - /* XXX do sigstack crapola here... XXX */ - - error |= __copy_from_user(&blocked, &context->sigset, sizeof(blocked)) ? -EFAULT : 0; - - if (error) - goto badframe; - - sigdelsetmask(&blocked, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = blocked; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - /* - * Don't let your children do this ... - */ - __asm__ __volatile__( - "move\t$29,%0\n\t" - "j\tsyscall_exit" - :/* no outputs */ - :"r" (®s)); - /* Unreached */ - -badframe: - force_sig(SIGSEGV, current); -} - -struct sigact_irix5 { - int flags; - void (*handler)(int); - u32 sigset[4]; - int _unused0[2]; -}; - -#define SIG_SETMASK32 256 /* Goodie from SGI for BSD compatibility: - set only the low 32 bit of the sigset. */ - -#ifdef DEBUG_SIG -static inline void dump_sigact_irix5(struct sigact_irix5 *p) -{ - printk("", p->flags, - (unsigned long) p->handler, - (unsigned long) p->sigset[0]); -} -#endif - -asmlinkage int -irix_sigaction(int sig, const struct sigaction __user *act, - struct sigaction __user *oact, void __user *trampoline) -{ - struct k_sigaction new_ka, old_ka; - int ret; - -#ifdef DEBUG_SIG - printk(" (%d,%s,%s,%08lx) ", sig, (!new ? "0" : "NEW"), - (!old ? "0" : "OLD"), trampoline); - if(new) { - dump_sigact_irix5(new); printk(" "); - } -#endif - if (act) { - sigset_t mask; - int err; - - if (!access_ok(VERIFY_READ, act, sizeof(*act))) - return -EFAULT; - err = __get_user(new_ka.sa.sa_handler, &act->sa_handler); - err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags); - - err |= __copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t)) ? -EFAULT : 0; - if (err) - return err; - - /* - * Hmmm... methinks IRIX libc always passes a valid trampoline - * value for all invocations of sigaction. Will have to - * investigate. POSIX POSIX, die die die... - */ - new_ka.sa_restorer = trampoline; - } - -/* XXX Implement SIG_SETMASK32 for IRIX compatibility */ - ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); - - if (!ret && oact) { - int err; - - if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact))) - return -EFAULT; - - err = __put_user(old_ka.sa.sa_handler, &oact->sa_handler); - err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags); - err |= __copy_to_user(&oact->sa_mask, &old_ka.sa.sa_mask, - sizeof(sigset_t)) ? -EFAULT : 0; - if (err) - return -EFAULT; - } - - return ret; -} - -asmlinkage int irix_sigpending(irix_sigset_t __user *set) -{ - return do_sigpending(set, sizeof(*set)); -} - -asmlinkage int irix_sigprocmask(int how, irix_sigset_t __user *new, - irix_sigset_t __user *old) -{ - sigset_t oldbits, newbits; - - if (new) { - if (!access_ok(VERIFY_READ, new, sizeof(*new))) - return -EFAULT; - if (__copy_from_user(&newbits, new, sizeof(unsigned long)*4)) - return -EFAULT; - sigdelsetmask(&newbits, ~_BLOCKABLE); - - spin_lock_irq(¤t->sighand->siglock); - oldbits = current->blocked; - - switch(how) { - case 1: - sigorsets(&newbits, &oldbits, &newbits); - break; - - case 2: - sigandsets(&newbits, &oldbits, &newbits); - break; - - case 3: - break; - - case 256: - siginitset(&newbits, newbits.sig[0]); - break; - - default: - spin_unlock_irq(¤t->sighand->siglock); - return -EINVAL; - } - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - } - if (old) - return copy_to_user(old, ¤t->blocked, - sizeof(unsigned long)*4) ? -EFAULT : 0; - - return 0; -} - -asmlinkage int irix_sigsuspend(struct pt_regs *regs) -{ - sigset_t newset; - sigset_t __user *uset; - - uset = (sigset_t __user *) regs->regs[4]; - if (copy_from_user(&newset, uset, sizeof(sigset_t))) - return -EFAULT; - sigdelsetmask(&newset, ~_BLOCKABLE); - - spin_lock_irq(¤t->sighand->siglock); - current->saved_sigmask = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); - - current->state = TASK_INTERRUPTIBLE; - schedule(); - set_thread_flag(TIF_RESTORE_SIGMASK); - return -ERESTARTNOHAND; -} - -/* hate hate hate... */ -struct irix5_siginfo { - int sig, code, error; - union { - char unused[128 - (3 * 4)]; /* Safety net. */ - struct { - int pid; - union { - int uid; - struct { - int utime, status, stime; - } child; - } procdata; - } procinfo; - - unsigned long fault_addr; - - struct { - int fd; - long band; - } fileinfo; - - unsigned long sigval; - } stuff; -}; - -asmlinkage int irix_sigpoll_sys(unsigned long __user *set, - struct irix5_siginfo __user *info, struct timespec __user *tp) -{ - long expire = MAX_SCHEDULE_TIMEOUT; - sigset_t kset; - int i, sig, error, timeo = 0; - struct timespec ktp; - -#ifdef DEBUG_SIG - printk("[%s:%d] irix_sigpoll_sys(%p,%p,%p)\n", - current->comm, current->pid, set, info, tp); -#endif - - /* Must always specify the signal set. */ - if (!set) - return -EINVAL; - - if (copy_from_user(&kset, set, sizeof(set))) - return -EFAULT; - - if (info && clear_user(info, sizeof(*info))) { - error = -EFAULT; - goto out; - } - - if (tp) { - if (copy_from_user(&ktp, tp, sizeof(*tp))) - return -EFAULT; - - if (!ktp.tv_sec && !ktp.tv_nsec) - return -EINVAL; - - expire = timespec_to_jiffies(&ktp) + - (ktp.tv_sec || ktp.tv_nsec); - } - - while(1) { - long tmp = 0; - - expire = schedule_timeout_interruptible(expire); - - for (i=0; i < _IRIX_NSIG_WORDS; i++) - tmp |= (current->pending.signal.sig[i] & kset.sig[i]); - - if (tmp) - break; - if (!expire) { - timeo = 1; - break; - } - if (signal_pending(current)) - return -EINTR; - } - if (timeo) - return -EAGAIN; - - for (sig = 1; i <= 65 /* IRIX_NSIG */; sig++) { - if (sigismember (&kset, sig)) - continue; - if (sigismember (¤t->pending.signal, sig)) { - /* XXX need more than this... */ - if (info) - return copy_to_user(&info->sig, &sig, sizeof(sig)); - return 0; - } - } - - /* Should not get here, but do something sane if we do. */ - error = -EINTR; - -out: - return error; -} - -/* This is here because of irix5_siginfo definition. */ -#define IRIX_P_PID 0 -#define IRIX_P_PGID 2 -#define IRIX_P_ALL 7 - -#define W_EXITED 1 -#define W_TRAPPED 2 -#define W_STOPPED 4 -#define W_CONT 8 -#define W_NOHANG 64 - -#define W_MASK (W_EXITED | W_TRAPPED | W_STOPPED | W_CONT | W_NOHANG) - -asmlinkage int irix_waitsys(int type, int upid, - struct irix5_siginfo __user *info, int options, - struct rusage __user *ru) -{ - struct pid *pid = NULL; - int flag, retval; - DECLARE_WAITQUEUE(wait, current); - struct task_struct *tsk; - struct task_struct *p; - struct list_head *_p; - - if (!info) - return -EINVAL; - - if (!access_ok(VERIFY_WRITE, info, sizeof(*info))) - return -EFAULT; - - if (ru) - if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru))) - return -EFAULT; - - if (options & ~W_MASK) - return -EINVAL; - - if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL) - return -EINVAL; - - if (type != IRIX_P_ALL) - pid = find_get_pid(upid); - add_wait_queue(¤t->signal->wait_chldexit, &wait); -repeat: - flag = 0; - current->state = TASK_INTERRUPTIBLE; - read_lock(&tasklist_lock); - tsk = current; - list_for_each(_p, &tsk->children) { - p = list_entry(_p, struct task_struct, sibling); - if ((type == IRIX_P_PID) && task_pid(p) != pid) - continue; - if ((type == IRIX_P_PGID) && task_pgrp(p) != pid) - continue; - if ((p->exit_signal != SIGCHLD)) - continue; - flag = 1; - switch (p->state) { - case TASK_STOPPED: - if (!p->exit_code) - continue; - if (!(options & (W_TRAPPED|W_STOPPED)) && - !(p->ptrace & PT_PTRACED)) - continue; - read_unlock(&tasklist_lock); - - /* move to end of parent's list to avoid starvation */ - write_lock_irq(&tasklist_lock); - remove_parent(p); - add_parent(p); - write_unlock_irq(&tasklist_lock); - retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0; - if (retval) - goto end_waitsys; - - retval = __put_user(SIGCHLD, &info->sig); - retval |= __put_user(0, &info->code); - retval |= __put_user(task_pid_vnr(p), &info->stuff.procinfo.pid); - retval |= __put_user((p->exit_code >> 8) & 0xff, - &info->stuff.procinfo.procdata.child.status); - retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime); - retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime); - if (retval) - goto end_waitsys; - - p->exit_code = 0; - goto end_waitsys; - - case EXIT_ZOMBIE: - current->signal->cutime += p->utime + p->signal->cutime; - current->signal->cstime += p->stime + p->signal->cstime; - if (ru != NULL) - getrusage(p, RUSAGE_BOTH, ru); - retval = __put_user(SIGCHLD, &info->sig); - retval |= __put_user(1, &info->code); /* CLD_EXITED */ - retval |= __put_user(task_pid_vnr(p), &info->stuff.procinfo.pid); - retval |= __put_user((p->exit_code >> 8) & 0xff, - &info->stuff.procinfo.procdata.child.status); - retval |= __put_user(p->utime, - &info->stuff.procinfo.procdata.child.utime); - retval |= __put_user(p->stime, - &info->stuff.procinfo.procdata.child.stime); - if (retval) - goto end_waitsys; - - if (p->real_parent != p->parent) { - write_lock_irq(&tasklist_lock); - remove_parent(p); - p->parent = p->real_parent; - add_parent(p); - do_notify_parent(p, SIGCHLD); - write_unlock_irq(&tasklist_lock); - } else - release_task(p); - goto end_waitsys; - default: - continue; - } - tsk = next_thread(tsk); - } - read_unlock(&tasklist_lock); - if (flag) { - retval = 0; - if (options & W_NOHANG) - goto end_waitsys; - retval = -ERESTARTSYS; - if (signal_pending(current)) - goto end_waitsys; - current->state = TASK_INTERRUPTIBLE; - schedule(); - goto repeat; - } - retval = -ECHILD; -end_waitsys: - current->state = TASK_RUNNING; - remove_wait_queue(¤t->signal->wait_chldexit, &wait); - put_pid(pid); - - return retval; -} - -struct irix5_context { - u32 flags; - u32 link; - u32 sigmask[4]; - struct { u32 sp, size, flags; } stack; - int regs[36]; - u32 fpregs[32]; - u32 fpcsr; - u32 _unused0; - u32 _unused1[47]; - u32 weird_graphics_thing; -}; - -asmlinkage int irix_getcontext(struct pt_regs *regs) -{ - int error, i, base = 0; - struct irix5_context __user *ctx; - unsigned long flags; - - if (regs->regs[2] == 1000) - base = 1; - ctx = (struct irix5_context __user *) regs->regs[base + 4]; - -#ifdef DEBUG_SIG - printk("[%s:%d] irix_getcontext(%p)\n", - current->comm, current->pid, ctx); -#endif - - if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx))) - return -EFAULT; - - error = __put_user(current->thread.irix_oldctx, &ctx->link); - - error |= __copy_to_user(&ctx->sigmask, ¤t->blocked, sizeof(irix_sigset_t)) ? -EFAULT : 0; - - /* XXX Do sigstack stuff someday... */ - error |= __put_user(0, &ctx->stack.sp); - error |= __put_user(0, &ctx->stack.size); - error |= __put_user(0, &ctx->stack.flags); - - error |= __put_user(0, &ctx->weird_graphics_thing); - error |= __put_user(0, &ctx->regs[0]); - for (i = 1; i < 32; i++) - error |= __put_user(regs->regs[i], &ctx->regs[i]); - error |= __put_user(regs->lo, &ctx->regs[32]); - error |= __put_user(regs->hi, &ctx->regs[33]); - error |= __put_user(regs->cp0_cause, &ctx->regs[34]); - error |= __put_user(regs->cp0_epc, &ctx->regs[35]); - - flags = 0x0f; - if (!used_math()) { - flags &= ~(0x08); - } else { - /* XXX wheee... */ - printk("Wheee, no code for saving IRIX FPU context yet.\n"); - } - error |= __put_user(flags, &ctx->flags); - - return error; -} - -asmlinkage void irix_setcontext(struct pt_regs *regs) -{ - struct irix5_context __user *ctx; - int err, base = 0; - u32 flags; - - if (regs->regs[2] == 1000) - base = 1; - ctx = (struct irix5_context __user *) regs->regs[base + 4]; - -#ifdef DEBUG_SIG - printk("[%s:%d] irix_setcontext(%p)\n", - current->comm, current->pid, ctx); -#endif - - if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx))) - goto segv_and_exit; - - err = __get_user(flags, &ctx->flags); - if (flags & 0x02) { - /* XXX sigstack garbage, todo... */ - printk("Wheee, cannot do sigstack stuff in setcontext\n"); - } - - if (flags & 0x04) { - int i; - - /* XXX extra control block stuff... todo... */ - for (i = 1; i < 32; i++) - err |= __get_user(regs->regs[i], &ctx->regs[i]); - err |= __get_user(regs->lo, &ctx->regs[32]); - err |= __get_user(regs->hi, &ctx->regs[33]); - err |= __get_user(regs->cp0_epc, &ctx->regs[35]); - } - - if (flags & 0x08) - /* XXX fpu context, blah... */ - printk(KERN_ERR "Wheee, cannot restore FPU context yet...\n"); - - err |= __get_user(current->thread.irix_oldctx, &ctx->link); - if (err) - goto segv_and_exit; - - /* - * Don't let your children do this ... - */ - __asm__ __volatile__( - "move\t$29,%0\n\t" - "j\tsyscall_exit" - :/* no outputs */ - :"r" (®s)); - /* Unreached */ - -segv_and_exit: - force_sigsegv(SIGSEGV, current); -} - -struct irix_sigstack { - unsigned long sp; - int status; -}; - -asmlinkage int irix_sigstack(struct irix_sigstack __user *new, - struct irix_sigstack __user *old) -{ -#ifdef DEBUG_SIG - printk("[%s:%d] irix_sigstack(%p,%p)\n", - current->comm, current->pid, new, old); -#endif - if (new) { - if (!access_ok(VERIFY_READ, new, sizeof(*new))) - return -EFAULT; - } - - if (old) { - if (!access_ok(VERIFY_WRITE, old, sizeof(*old))) - return -EFAULT; - } - - return 0; -} - -struct irix_sigaltstack { unsigned long sp; int size; int status; }; - -asmlinkage int irix_sigaltstack(struct irix_sigaltstack __user *new, - struct irix_sigaltstack __user *old) -{ -#ifdef DEBUG_SIG - printk("[%s:%d] irix_sigaltstack(%p,%p)\n", - current->comm, current->pid, new, old); -#endif - if (new) - if (!access_ok(VERIFY_READ, new, sizeof(*new))) - return -EFAULT; - - if (old) { - if (!access_ok(VERIFY_WRITE, old, sizeof(*old))) - return -EFAULT; - } - - return 0; -} - -struct irix_procset { - int cmd, ltype, lid, rtype, rid; -}; - -asmlinkage int irix_sigsendset(struct irix_procset __user *pset, int sig) -{ - if (!access_ok(VERIFY_READ, pset, sizeof(*pset))) - return -EFAULT; -#ifdef DEBUG_SIG - printk("[%s:%d] irix_sigsendset([%d,%d,%d,%d,%d],%d)\n", - current->comm, current->pid, - pset->cmd, pset->ltype, pset->lid, pset->rtype, pset->rid, - sig); -#endif - return -EINVAL; -} diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 2c09a442e5e5..c06f5b5d764c 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -125,13 +125,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, *childregs = *regs; childregs->regs[7] = 0; /* Clear error flag */ -#if defined(CONFIG_BINFMT_IRIX) - if (current->personality != PER_LINUX) { - /* Under IRIX things are a little different. */ - childregs->regs[3] = 1; - regs->regs[3] = 0; - } -#endif childregs->regs[2] = 0; /* Child gets zero as return value */ regs->regs[2] = p->pid; diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 08a9c5070ea8..c058c0b61a2a 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -34,12 +34,8 @@ NESTED(handle_sys, PT_SIZE, sp) lw t1, PT_EPC(sp) # skip syscall on return -#if defined(CONFIG_BINFMT_IRIX) - sltiu t0, v0, MAX_SYSCALL_NO + 1 # check syscall number -#else subu v0, v0, __NR_O32_Linux # check syscall number sltiu t0, v0, __NR_O32_Linux_syscalls + 1 -#endif addiu t1, 4 # skip to next instruction sw t1, PT_EPC(sp) beqz t0, illegal_syscall @@ -264,22 +260,14 @@ bad_alignment: END(sys_sysmips) LEAF(sys_syscall) -#if defined(CONFIG_BINFMT_IRIX) - sltiu v0, a0, MAX_SYSCALL_NO + 1 # check syscall number -#else subu t0, a0, __NR_O32_Linux # check syscall number sltiu v0, t0, __NR_O32_Linux_syscalls + 1 -#endif sll t1, t0, 3 beqz v0, einval lw t2, sys_call_table(t1) # syscall routine -#if defined(CONFIG_BINFMT_IRIX) - li v1, 4000 # nr of sys_syscall -#else li v1, 4000 - __NR_O32_Linux # index of sys_syscall -#endif beq t0, v1, einval # do not recurse /* Some syscalls like execve get their arguments from struct pt_regs @@ -324,13 +312,6 @@ einval: li v0, -EINVAL .endm .macro syscalltable -#if defined(CONFIG_BINFMT_IRIX) - mille sys_ni_syscall 0 /* 0 - 999 SVR4 flavour */ - mille sys_ni_syscall 0 /* 1000 - 1999 32-bit IRIX */ - mille sys_ni_syscall 0 /* 2000 - 2999 BSD43 flavour */ - mille sys_ni_syscall 0 /* 3000 - 3999 POSIX flavour */ -#endif - sys sys_syscall 8 /* 4000 */ sys sys_exit 1 sys sys_fork 0 diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c deleted file mode 100644 index c357762b8012..000000000000 --- a/arch/mips/kernel/sysirix.c +++ /dev/null @@ -1,2140 +0,0 @@ -/* - * sysirix.c: IRIX system call emulation. - * - * Copyright (C) 1996 David S. Miller - * Copyright (C) 1997 Miguel de Icaza - * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* 2,191 lines of complete and utter shit coming up... */ - -extern int max_threads; - -/* The sysmp commands supported thus far. */ -#define MP_NPROCS 1 /* # processor in complex */ -#define MP_NAPROCS 2 /* # active processors in complex */ -#define MP_PGSIZE 14 /* Return system page size in v1. */ - -asmlinkage int irix_sysmp(struct pt_regs *regs) -{ - unsigned long cmd; - int base = 0; - int error = 0; - - if(regs->regs[2] == 1000) - base = 1; - cmd = regs->regs[base + 4]; - switch(cmd) { - case MP_PGSIZE: - error = PAGE_SIZE; - break; - case MP_NPROCS: - case MP_NAPROCS: - error = num_online_cpus(); - break; - default: - printk("SYSMP[%s:%d]: Unsupported opcode %d\n", - current->comm, current->pid, (int)cmd); - error = -EINVAL; - break; - } - - return error; -} - -/* The prctl commands. */ -#define PR_MAXPROCS 1 /* Tasks/user. */ -#define PR_ISBLOCKED 2 /* If blocked, return 1. */ -#define PR_SETSTACKSIZE 3 /* Set largest task stack size. */ -#define PR_GETSTACKSIZE 4 /* Get largest task stack size. */ -#define PR_MAXPPROCS 5 /* Num parallel tasks. */ -#define PR_UNBLKONEXEC 6 /* When task exec/exit's, unblock. */ -#define PR_SETEXITSIG 8 /* When task exit's, set signal. */ -#define PR_RESIDENT 9 /* Make task unswappable. */ -#define PR_ATTACHADDR 10 /* (Re-)Connect a vma to a task. */ -#define PR_DETACHADDR 11 /* Disconnect a vma from a task. */ -#define PR_TERMCHILD 12 /* Kill child if the parent dies. */ -#define PR_GETSHMASK 13 /* Get the sproc() share mask. */ -#define PR_GETNSHARE 14 /* Number of share group members. */ -#define PR_COREPID 15 /* Add task pid to name when it core. */ -#define PR_ATTACHADDRPERM 16 /* (Re-)Connect vma, with specified prot. */ -#define PR_PTHREADEXIT 17 /* Kill a pthread, only for IRIX 6.[234] */ - -asmlinkage int irix_prctl(unsigned option, ...) -{ - va_list args; - int error = 0; - - va_start(args, option); - switch (option) { - case PR_MAXPROCS: - printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n", - current->comm, current->pid); - error = max_threads; - break; - - case PR_ISBLOCKED: { - struct task_struct *task; - - printk("irix_prctl[%s:%d]: Wants PR_ISBLOCKED\n", - current->comm, current->pid); - read_lock(&tasklist_lock); - task = find_task_by_vpid(va_arg(args, pid_t)); - error = -ESRCH; - if (error) - error = (task->run_list.next != NULL); - read_unlock(&tasklist_lock); - /* Can _your_ OS find this out that fast? */ - break; - } - - case PR_SETSTACKSIZE: { - long value = va_arg(args, long); - - printk("irix_prctl[%s:%d]: Wants PR_SETSTACKSIZE<%08lx>\n", - current->comm, current->pid, (unsigned long) value); - if (value > RLIM_INFINITY) - value = RLIM_INFINITY; - if (capable(CAP_SYS_ADMIN)) { - task_lock(current->group_leader); - current->signal->rlim[RLIMIT_STACK].rlim_max = - current->signal->rlim[RLIMIT_STACK].rlim_cur = value; - task_unlock(current->group_leader); - error = value; - break; - } - task_lock(current->group_leader); - if (value > current->signal->rlim[RLIMIT_STACK].rlim_max) { - error = -EINVAL; - task_unlock(current->group_leader); - break; - } - current->signal->rlim[RLIMIT_STACK].rlim_cur = value; - task_unlock(current->group_leader); - error = value; - break; - } - - case PR_GETSTACKSIZE: - printk("irix_prctl[%s:%d]: Wants PR_GETSTACKSIZE\n", - current->comm, current->pid); - error = current->signal->rlim[RLIMIT_STACK].rlim_cur; - break; - - case PR_MAXPPROCS: - printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n", - current->comm, current->pid); - error = 1; - break; - - case PR_UNBLKONEXEC: - printk("irix_prctl[%s:%d]: Wants PR_UNBLKONEXEC\n", - current->comm, current->pid); - error = -EINVAL; - break; - - case PR_SETEXITSIG: - printk("irix_prctl[%s:%d]: Wants PR_SETEXITSIG\n", - current->comm, current->pid); - - /* We can probably play some game where we set the task - * exit_code to some non-zero value when this is requested, - * and check whether exit_code is already set in do_exit(). - */ - error = -EINVAL; - break; - - case PR_RESIDENT: - printk("irix_prctl[%s:%d]: Wants PR_RESIDENT\n", - current->comm, current->pid); - error = 0; /* Compatibility indeed. */ - break; - - case PR_ATTACHADDR: - printk("irix_prctl[%s:%d]: Wants PR_ATTACHADDR\n", - current->comm, current->pid); - error = -EINVAL; - break; - - case PR_DETACHADDR: - printk("irix_prctl[%s:%d]: Wants PR_DETACHADDR\n", - current->comm, current->pid); - error = -EINVAL; - break; - - case PR_TERMCHILD: - printk("irix_prctl[%s:%d]: Wants PR_TERMCHILD\n", - current->comm, current->pid); - error = -EINVAL; - break; - - case PR_GETSHMASK: - printk("irix_prctl[%s:%d]: Wants PR_GETSHMASK\n", - current->comm, current->pid); - error = -EINVAL; /* Until I have the sproc() stuff in. */ - break; - - case PR_GETNSHARE: - error = 0; /* Until I have the sproc() stuff in. */ - break; - - case PR_COREPID: - printk("irix_prctl[%s:%d]: Wants PR_COREPID\n", - current->comm, current->pid); - error = -EINVAL; - break; - - case PR_ATTACHADDRPERM: - printk("irix_prctl[%s:%d]: Wants PR_ATTACHADDRPERM\n", - current->comm, current->pid); - error = -EINVAL; - break; - - default: - printk("irix_prctl[%s:%d]: Non-existant opcode %d\n", - current->comm, current->pid, option); - error = -EINVAL; - break; - } - va_end(args); - - return error; -} - -#undef DEBUG_PROCGRPS - -extern unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt); -extern char *prom_getenv(char *name); -extern long prom_setenv(char *name, char *value); - -/* The syssgi commands supported thus far. */ -#define SGI_SYSID 1 /* Return unique per-machine identifier. */ -#define SGI_INVENT 5 /* Fetch inventory */ -# define SGI_INV_SIZEOF 1 -# define SGI_INV_READ 2 -#define SGI_RDNAME 6 /* Return string name of a process. */ -#define SGI_SETNVRAM 8 /* Set PROM variable. */ -#define SGI_GETNVRAM 9 /* Get PROM variable. */ -#define SGI_SETPGID 21 /* Set process group id. */ -#define SGI_SYSCONF 22 /* POSIX sysconf garbage. */ -#define SGI_PATHCONF 24 /* POSIX sysconf garbage. */ -#define SGI_SETGROUPS 40 /* POSIX sysconf garbage. */ -#define SGI_GETGROUPS 41 /* POSIX sysconf garbage. */ -#define SGI_RUSAGE 56 /* BSD style rusage(). */ -#define SGI_SSYNC 62 /* Synchronous fs sync. */ -#define SGI_GETSID 65 /* SysVr4 get session id. */ -#define SGI_ELFMAP 68 /* Map an elf image. */ -#define SGI_TOSSTSAVE 108 /* Toss saved vma's. */ -#define SGI_FP_BCOPY 129 /* Should FPU bcopy be used on this machine? */ -#define SGI_PHYSP 1011 /* Translate virtual into physical page. */ - -asmlinkage int irix_syssgi(struct pt_regs *regs) -{ - unsigned long cmd; - int retval, base = 0; - - if (regs->regs[2] == 1000) - base = 1; - - cmd = regs->regs[base + 4]; - switch(cmd) { - case SGI_SYSID: { - char __user *buf = (char __user *) regs->regs[base + 5]; - - /* XXX Use ethernet addr.... */ - retval = clear_user(buf, 64) ? -EFAULT : 0; - break; - } -#if 0 - case SGI_RDNAME: { - int pid = (int) regs->regs[base + 5]; - char __user *buf = (char __user *) regs->regs[base + 6]; - struct task_struct *p; - char tcomm[sizeof(current->comm)]; - - read_lock(&tasklist_lock); - p = find_task_by_pid(pid); - if (!p) { - read_unlock(&tasklist_lock); - retval = -ESRCH; - break; - } - get_task_comm(tcomm, p); - read_unlock(&tasklist_lock); - - /* XXX Need to check sizes. */ - retval = copy_to_user(buf, tcomm, sizeof(tcomm)) ? -EFAULT : 0; - break; - } - - case SGI_GETNVRAM: { - char __user *name = (char __user *) regs->regs[base+5]; - char __user *buf = (char __user *) regs->regs[base+6]; - char *value; - return -EINVAL; /* til I fix it */ - value = prom_getenv(name); /* PROM lock? */ - if (!value) { - retval = -EINVAL; - break; - } - /* Do I strlen() for the length? */ - retval = copy_to_user(buf, value, 128) ? -EFAULT : 0; - break; - } - - case SGI_SETNVRAM: { - char __user *name = (char __user *) regs->regs[base+5]; - char __user *value = (char __user *) regs->regs[base+6]; - return -EINVAL; /* til I fix it */ - retval = prom_setenv(name, value); - /* XXX make sure retval conforms to syssgi(2) */ - printk("[%s:%d] setnvram(\"%s\", \"%s\"): retval %d", - current->comm, current->pid, name, value, retval); -/* if (retval == PROM_ENOENT) - retval = -ENOENT; */ - break; - } -#endif - - case SGI_SETPGID: { -#ifdef DEBUG_PROCGRPS - printk("[%s:%d] setpgid(%d, %d) ", - current->comm, current->pid, - (int) regs->regs[base + 5], (int)regs->regs[base + 6]); -#endif - retval = sys_setpgid(regs->regs[base + 5], regs->regs[base + 6]); - -#ifdef DEBUG_PROCGRPS - printk("retval=%d\n", retval); -#endif - } - - case SGI_SYSCONF: { - switch(regs->regs[base + 5]) { - case 1: - retval = (MAX_ARG_PAGES >> 4); /* XXX estimate... */ - goto out; - case 2: - retval = max_threads; - goto out; - case 3: - retval = HZ; - goto out; - case 4: - retval = NGROUPS_MAX; - goto out; - case 5: - retval = sysctl_nr_open; - goto out; - case 6: - retval = 1; - goto out; - case 7: - retval = 1; - goto out; - case 8: - retval = 199009; - goto out; - case 11: - retval = PAGE_SIZE; - goto out; - case 12: - retval = 4; - goto out; - case 25: - case 26: - case 27: - case 28: - case 29: - case 30: - retval = 0; - goto out; - case 31: - retval = 32; - goto out; - default: - retval = -EINVAL; - goto out; - }; - } - - case SGI_SETGROUPS: - retval = sys_setgroups((int) regs->regs[base + 5], - (gid_t __user *) regs->regs[base + 6]); - break; - - case SGI_GETGROUPS: - retval = sys_getgroups((int) regs->regs[base + 5], - (gid_t __user *) regs->regs[base + 6]); - break; - - case SGI_RUSAGE: { - struct rusage __user *ru = (struct rusage __user *) regs->regs[base + 6]; - - switch((int) regs->regs[base + 5]) { - case 0: - /* rusage self */ - retval = getrusage(current, RUSAGE_SELF, ru); - goto out; - - case -1: - /* rusage children */ - retval = getrusage(current, RUSAGE_CHILDREN, ru); - goto out; - - default: - retval = -EINVAL; - goto out; - }; - } - - case SGI_SSYNC: - sys_sync(); - retval = 0; - break; - - case SGI_GETSID: -#ifdef DEBUG_PROCGRPS - printk("[%s:%d] getsid(%d) ", current->comm, current->pid, - (int) regs->regs[base + 5]); -#endif - retval = sys_getsid(regs->regs[base + 5]); -#ifdef DEBUG_PROCGRPS - printk("retval=%d\n", retval); -#endif - break; - - case SGI_ELFMAP: - retval = irix_mapelf((int) regs->regs[base + 5], - (struct elf_phdr __user *) regs->regs[base + 6], - (int) regs->regs[base + 7]); - break; - - case SGI_TOSSTSAVE: - /* XXX We don't need to do anything? */ - retval = 0; - break; - - case SGI_FP_BCOPY: - retval = 0; - break; - - case SGI_PHYSP: { - unsigned long addr = regs->regs[base + 5]; - int __user *pageno = (int __user *) (regs->regs[base + 6]); - struct mm_struct *mm = current->mm; - pgd_t *pgdp; - pud_t *pudp; - pmd_t *pmdp; - pte_t *ptep; - - down_read(&mm->mmap_sem); - pgdp = pgd_offset(mm, addr); - pudp = pud_offset(pgdp, addr); - pmdp = pmd_offset(pudp, addr); - ptep = pte_offset(pmdp, addr); - retval = -EINVAL; - if (ptep) { - pte_t pte = *ptep; - - if (pte_val(pte) & (_PAGE_VALID | _PAGE_PRESENT)) { - /* b0rked on 64-bit */ - retval = put_user((pte_val(pte) & PAGE_MASK) >> - PAGE_SHIFT, pageno); - } - } - up_read(&mm->mmap_sem); - break; - } - - case SGI_INVENT: { - int arg1 = (int) regs->regs [base + 5]; - void __user *buffer = (void __user *) regs->regs [base + 6]; - int count = (int) regs->regs [base + 7]; - - switch (arg1) { - case SGI_INV_SIZEOF: - retval = sizeof(inventory_t); - break; - case SGI_INV_READ: - retval = dump_inventory_to_user(buffer, count); - break; - default: - retval = -EINVAL; - } - break; - } - - default: - printk("irix_syssgi: Unsupported command %d\n", (int)cmd); - retval = -EINVAL; - break; - }; - -out: - return retval; -} - -asmlinkage int irix_gtime(struct pt_regs *regs) -{ - return get_seconds(); -} - -/* - * IRIX is completely broken... it returns 0 on success, otherwise - * ENOMEM. - */ -asmlinkage int irix_brk(unsigned long brk) -{ - unsigned long rlim; - unsigned long newbrk, oldbrk; - struct mm_struct *mm = current->mm; - int ret; - - down_write(&mm->mmap_sem); - if (brk < mm->end_code) { - ret = -ENOMEM; - goto out; - } - - newbrk = PAGE_ALIGN(brk); - oldbrk = PAGE_ALIGN(mm->brk); - if (oldbrk == newbrk) { - mm->brk = brk; - ret = 0; - goto out; - } - - /* - * Always allow shrinking brk - */ - if (brk <= mm->brk) { - mm->brk = brk; - do_munmap(mm, newbrk, oldbrk-newbrk); - ret = 0; - goto out; - } - /* - * Check against rlimit and stack.. - */ - rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur; - if (rlim >= RLIM_INFINITY) - rlim = ~0; - if (brk - mm->end_code > rlim) { - ret = -ENOMEM; - goto out; - } - - /* - * Check against existing mmap mappings. - */ - if (find_vma_intersection(mm, oldbrk, newbrk+PAGE_SIZE)) { - ret = -ENOMEM; - goto out; - } - - /* - * Ok, looks good - let it rip. - */ - if (do_brk(oldbrk, newbrk-oldbrk) != oldbrk) { - ret = -ENOMEM; - goto out; - } - mm->brk = brk; - ret = 0; - -out: - up_write(&mm->mmap_sem); - return ret; -} - -asmlinkage int irix_getpid(struct pt_regs *regs) -{ - regs->regs[3] = task_pid_vnr(current->real_parent); - return task_pid_vnr(current); -} - -asmlinkage int irix_getuid(struct pt_regs *regs) -{ - regs->regs[3] = current->euid; - return current->uid; -} - -asmlinkage int irix_getgid(struct pt_regs *regs) -{ - regs->regs[3] = current->egid; - return current->gid; -} - -asmlinkage int irix_stime(int value) -{ - int err; - struct timespec tv; - - tv.tv_sec = value; - tv.tv_nsec = 0; - err = security_settime(&tv, NULL); - if (err) - return err; - - write_seqlock_irq(&xtime_lock); - xtime.tv_sec = value; - xtime.tv_nsec = 0; - ntp_clear(); - write_sequnlock_irq(&xtime_lock); - - return 0; -} - -static inline void jiffiestotv(unsigned long jiffies, struct timeval *value) -{ - value->tv_usec = (jiffies % HZ) * (1000000 / HZ); - value->tv_sec = jiffies / HZ; -} - -static inline void getitimer_real(struct itimerval *value) -{ - register unsigned long val, interval; - - interval = current->it_real_incr; - val = 0; - if (del_timer(¤t->real_timer)) { - unsigned long now = jiffies; - val = current->real_timer.expires; - add_timer(¤t->real_timer); - /* look out for negative/zero itimer.. */ - if (val <= now) - val = now+1; - val -= now; - } - jiffiestotv(val, &value->it_value); - jiffiestotv(interval, &value->it_interval); -} - -asmlinkage unsigned int irix_alarm(unsigned int seconds) -{ - return alarm_setitimer(seconds); -} - -asmlinkage int irix_pause(void) -{ - current->state = TASK_INTERRUPTIBLE; - schedule(); - - return -EINTR; -} - -/* XXX need more than this... */ -asmlinkage int irix_mount(char __user *dev_name, char __user *dir_name, - unsigned long flags, char __user *type, void __user *data, int datalen) -{ - printk("[%s:%d] irix_mount(%p,%p,%08lx,%p,%p,%d)\n", - current->comm, current->pid, - dev_name, dir_name, flags, type, data, datalen); - - return sys_mount(dev_name, dir_name, type, flags, data); -} - -struct irix_statfs { - short f_type; - long f_bsize, f_frsize, f_blocks, f_bfree, f_files, f_ffree; - char f_fname[6], f_fpack[6]; -}; - -asmlinkage int irix_statfs(const char __user *path, - struct irix_statfs __user *buf, int len, int fs_type) -{ - struct nameidata nd; - struct kstatfs kbuf; - int error, i; - - /* We don't support this feature yet. */ - if (fs_type) { - error = -EINVAL; - goto out; - } - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statfs))) { - error = -EFAULT; - goto out; - } - - error = user_path_walk(path, &nd); - if (error) - goto out; - - error = vfs_statfs(nd.path.dentry, &kbuf); - if (error) - goto dput_and_out; - - error = __put_user(kbuf.f_type, &buf->f_type); - error |= __put_user(kbuf.f_bsize, &buf->f_bsize); - error |= __put_user(kbuf.f_frsize, &buf->f_frsize); - error |= __put_user(kbuf.f_blocks, &buf->f_blocks); - error |= __put_user(kbuf.f_bfree, &buf->f_bfree); - error |= __put_user(kbuf.f_files, &buf->f_files); - error |= __put_user(kbuf.f_ffree, &buf->f_ffree); - for (i = 0; i < 6; i++) { - error |= __put_user(0, &buf->f_fname[i]); - error |= __put_user(0, &buf->f_fpack[i]); - } - -dput_and_out: - path_put(&nd.path); -out: - return error; -} - -asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs __user *buf) -{ - struct kstatfs kbuf; - struct file *file; - int error, i; - - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statfs))) { - error = -EFAULT; - goto out; - } - - if (!(file = fget(fd))) { - error = -EBADF; - goto out; - } - - error = vfs_statfs(file->f_path.dentry, &kbuf); - if (error) - goto out_f; - - error = __put_user(kbuf.f_type, &buf->f_type); - error |= __put_user(kbuf.f_bsize, &buf->f_bsize); - error |= __put_user(kbuf.f_frsize, &buf->f_frsize); - error |= __put_user(kbuf.f_blocks, &buf->f_blocks); - error |= __put_user(kbuf.f_bfree, &buf->f_bfree); - error |= __put_user(kbuf.f_files, &buf->f_files); - error |= __put_user(kbuf.f_ffree, &buf->f_ffree); - - for (i = 0; i < 6; i++) { - error |= __put_user(0, &buf->f_fname[i]); - error |= __put_user(0, &buf->f_fpack[i]); - } - -out_f: - fput(file); -out: - return error; -} - -asmlinkage int irix_setpgrp(int flags) -{ - int error; - -#ifdef DEBUG_PROCGRPS - printk("[%s:%d] setpgrp(%d) ", current->comm, current->pid, flags); -#endif - if(!flags) - error = task_pgrp_vnr(current); - else - error = sys_setsid(); -#ifdef DEBUG_PROCGRPS - printk("returning %d\n", error); -#endif - - return error; -} - -asmlinkage int irix_times(struct tms __user *tbuf) -{ - int err = 0; - - if (tbuf) { - if (!access_ok(VERIFY_WRITE, tbuf, sizeof *tbuf)) - return -EFAULT; - - err = __put_user(current->utime, &tbuf->tms_utime); - err |= __put_user(current->stime, &tbuf->tms_stime); - err |= __put_user(current->signal->cutime, &tbuf->tms_cutime); - err |= __put_user(current->signal->cstime, &tbuf->tms_cstime); - } - - return err; -} - -asmlinkage int irix_exec(struct pt_regs *regs) -{ - int error, base = 0; - char *filename; - - if(regs->regs[2] == 1000) - base = 1; - filename = getname((char __user *) (long)regs->regs[base + 4]); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - return error; - - error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5], - NULL, regs); - putname(filename); - - return error; -} - -asmlinkage int irix_exece(struct pt_regs *regs) -{ - int error, base = 0; - char *filename; - - if (regs->regs[2] == 1000) - base = 1; - filename = getname((char __user *) (long)regs->regs[base + 4]); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - return error; - error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5], - (char __user * __user *) (long)regs->regs[base + 6], regs); - putname(filename); - - return error; -} - -asmlinkage unsigned long irix_gethostid(void) -{ - printk("[%s:%d]: irix_gethostid() called...\n", - current->comm, current->pid); - - return -EINVAL; -} - -asmlinkage unsigned long irix_sethostid(unsigned long val) -{ - printk("[%s:%d]: irix_sethostid(%08lx) called...\n", - current->comm, current->pid, val); - - return -EINVAL; -} - -asmlinkage int irix_socket(int family, int type, int protocol) -{ - switch(type) { - case 1: - type = SOCK_DGRAM; - break; - - case 2: - type = SOCK_STREAM; - break; - - case 3: - type = 9; /* Invalid... */ - break; - - case 4: - type = SOCK_RAW; - break; - - case 5: - type = SOCK_RDM; - break; - - case 6: - type = SOCK_SEQPACKET; - break; - - default: - break; - } - - return sys_socket(family, type, protocol); -} - -asmlinkage int irix_getdomainname(char __user *name, int len) -{ - int err; - - down_read(&uts_sem); - if (len > __NEW_UTS_LEN) - len = __NEW_UTS_LEN; - err = copy_to_user(name, utsname()->domainname, len) ? -EFAULT : 0; - up_read(&uts_sem); - - return err; -} - -asmlinkage unsigned long irix_getpagesize(void) -{ - return PAGE_SIZE; -} - -asmlinkage int irix_msgsys(int opcode, unsigned long arg0, unsigned long arg1, - unsigned long arg2, unsigned long arg3, - unsigned long arg4) -{ - switch (opcode) { - case 0: - return sys_msgget((key_t) arg0, (int) arg1); - case 1: - return sys_msgctl((int) arg0, (int) arg1, - (struct msqid_ds __user *)arg2); - case 2: - return sys_msgrcv((int) arg0, (struct msgbuf __user *) arg1, - (size_t) arg2, (long) arg3, (int) arg4); - case 3: - return sys_msgsnd((int) arg0, (struct msgbuf __user *) arg1, - (size_t) arg2, (int) arg3); - default: - return -EINVAL; - } -} - -asmlinkage int irix_shmsys(int opcode, unsigned long arg0, unsigned long arg1, - unsigned long arg2, unsigned long arg3) -{ - switch (opcode) { - case 0: - return do_shmat((int) arg0, (char __user *) arg1, (int) arg2, - (unsigned long *) arg3); - case 1: - return sys_shmctl((int)arg0, (int)arg1, - (struct shmid_ds __user *)arg2); - case 2: - return sys_shmdt((char __user *)arg0); - case 3: - return sys_shmget((key_t) arg0, (int) arg1, (int) arg2); - default: - return -EINVAL; - } -} - -asmlinkage int irix_semsys(int opcode, unsigned long arg0, unsigned long arg1, - unsigned long arg2, int arg3) -{ - switch (opcode) { - case 0: - return sys_semctl((int) arg0, (int) arg1, (int) arg2, - (union semun) arg3); - case 1: - return sys_semget((key_t) arg0, (int) arg1, (int) arg2); - case 2: - return sys_semop((int) arg0, (struct sembuf __user *)arg1, - (unsigned int) arg2); - default: - return -EINVAL; - } -} - -static inline loff_t llseek(struct file *file, loff_t offset, int origin) -{ - loff_t (*fn)(struct file *, loff_t, int); - loff_t retval; - - fn = default_llseek; - if (file->f_op && file->f_op->llseek) - fn = file->f_op->llseek; - lock_kernel(); - retval = fn(file, offset, origin); - unlock_kernel(); - - return retval; -} - -asmlinkage int irix_lseek64(int fd, int _unused, int offhi, int offlow, - int origin) -{ - struct file * file; - loff_t offset; - int retval; - - retval = -EBADF; - file = fget(fd); - if (!file) - goto bad; - retval = -EINVAL; - if (origin > 2) - goto out_putf; - - offset = llseek(file, ((loff_t) offhi << 32) | offlow, origin); - retval = (int) offset; - -out_putf: - fput(file); -bad: - return retval; -} - -asmlinkage int irix_sginap(int ticks) -{ - schedule_timeout_interruptible(ticks); - return 0; -} - -asmlinkage int irix_sgikopt(char __user *istring, char __user *ostring, int len) -{ - return -EINVAL; -} - -asmlinkage int irix_gettimeofday(struct timeval __user *tv) -{ - time_t sec; - long nsec, seq; - int err; - - if (!access_ok(VERIFY_WRITE, tv, sizeof(struct timeval))) - return -EFAULT; - - do { - seq = read_seqbegin(&xtime_lock); - sec = xtime.tv_sec; - nsec = xtime.tv_nsec; - } while (read_seqretry(&xtime_lock, seq)); - - err = __put_user(sec, &tv->tv_sec); - err |= __put_user((nsec / 1000), &tv->tv_usec); - - return err; -} - -#define IRIX_MAP_AUTOGROW 0x40 - -asmlinkage unsigned long irix_mmap32(unsigned long addr, size_t len, int prot, - int flags, int fd, off_t offset) -{ - struct file *file = NULL; - unsigned long retval; - - if (!(flags & MAP_ANONYMOUS)) { - if (!(file = fget(fd))) - return -EBADF; - - /* Ok, bad taste hack follows, try to think in something else - * when reading this. */ - if (flags & IRIX_MAP_AUTOGROW) { - unsigned long old_pos; - long max_size = offset + len; - - if (max_size > file->f_path.dentry->d_inode->i_size) { - old_pos = sys_lseek(fd, max_size - 1, 0); - sys_write(fd, (void __user *) "", 1); - sys_lseek(fd, old_pos, 0); - } - } - } - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - retval = do_mmap(file, addr, len, prot, flags, offset); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); - - return retval; -} - -asmlinkage int irix_madvise(unsigned long addr, int len, int behavior) -{ - printk("[%s:%d] Wheee.. irix_madvise(%08lx,%d,%d)\n", - current->comm, current->pid, addr, len, behavior); - - return -EINVAL; -} - -asmlinkage int irix_pagelock(char __user *addr, int len, int op) -{ - printk("[%s:%d] Wheee.. irix_pagelock(%p,%d,%d)\n", - current->comm, current->pid, addr, len, op); - - return -EINVAL; -} - -asmlinkage int irix_quotactl(struct pt_regs *regs) -{ - printk("[%s:%d] Wheee.. irix_quotactl()\n", - current->comm, current->pid); - - return -EINVAL; -} - -asmlinkage int irix_BSDsetpgrp(int pid, int pgrp) -{ - int error; - -#ifdef DEBUG_PROCGRPS - printk("[%s:%d] BSDsetpgrp(%d, %d) ", current->comm, current->pid, - pid, pgrp); -#endif - if(!pid) - pid = task_pid_vnr(current); - - /* Wheee, weird sysv thing... */ - if ((pgrp == 0) && (pid == task_pid_vnr(current))) - error = sys_setsid(); - else - error = sys_setpgid(pid, pgrp); - -#ifdef DEBUG_PROCGRPS - printk("error = %d\n", error); -#endif - - return error; -} - -asmlinkage int irix_systeminfo(int cmd, char __user *buf, int cnt) -{ - printk("[%s:%d] Wheee.. irix_systeminfo(%d,%p,%d)\n", - current->comm, current->pid, cmd, buf, cnt); - - return -EINVAL; -} - -struct iuname { - char sysname[257], nodename[257], release[257]; - char version[257], machine[257]; - char m_type[257], base_rel[257]; - char _unused0[257], _unused1[257], _unused2[257]; - char _unused3[257], _unused4[257], _unused5[257]; -}; - -asmlinkage int irix_uname(struct iuname __user *buf) -{ - down_read(&uts_sem); - if (copy_from_user(utsname()->sysname, buf->sysname, 65) - || copy_from_user(utsname()->nodename, buf->nodename, 65) - || copy_from_user(utsname()->release, buf->release, 65) - || copy_from_user(utsname()->version, buf->version, 65) - || copy_from_user(utsname()->machine, buf->machine, 65)) { - return -EFAULT; - } - up_read(&uts_sem); - - return 1; -} - -#undef DEBUG_XSTAT - -static int irix_xstat32_xlate(struct kstat *stat, void __user *ubuf) -{ - struct xstat32 { - u32 st_dev, st_pad1[3], st_ino, st_mode, st_nlink, st_uid, st_gid; - u32 st_rdev, st_pad2[2], st_size, st_pad3; - u32 st_atime0, st_atime1; - u32 st_mtime0, st_mtime1; - u32 st_ctime0, st_ctime1; - u32 st_blksize, st_blocks; - char st_fstype[16]; - u32 st_pad4[8]; - } ub; - - if (!sysv_valid_dev(stat->dev) || !sysv_valid_dev(stat->rdev)) - return -EOVERFLOW; - ub.st_dev = sysv_encode_dev(stat->dev); - ub.st_ino = stat->ino; - ub.st_mode = stat->mode; - ub.st_nlink = stat->nlink; - SET_UID(ub.st_uid, stat->uid); - SET_GID(ub.st_gid, stat->gid); - ub.st_rdev = sysv_encode_dev(stat->rdev); -#if BITS_PER_LONG == 32 - if (stat->size > MAX_NON_LFS) - return -EOVERFLOW; -#endif - ub.st_size = stat->size; - ub.st_atime0 = stat->atime.tv_sec; - ub.st_atime1 = stat->atime.tv_nsec; - ub.st_mtime0 = stat->mtime.tv_sec; - ub.st_mtime1 = stat->atime.tv_nsec; - ub.st_ctime0 = stat->ctime.tv_sec; - ub.st_ctime1 = stat->atime.tv_nsec; - ub.st_blksize = stat->blksize; - ub.st_blocks = stat->blocks; - strcpy(ub.st_fstype, "efs"); - - return copy_to_user(ubuf, &ub, sizeof(ub)) ? -EFAULT : 0; -} - -static int irix_xstat64_xlate(struct kstat *stat, void __user *ubuf) -{ - struct xstat64 { - u32 st_dev; s32 st_pad1[3]; - unsigned long long st_ino; - u32 st_mode; - u32 st_nlink; s32 st_uid; s32 st_gid; u32 st_rdev; - s32 st_pad2[2]; - long long st_size; - s32 st_pad3; - struct { s32 tv_sec, tv_nsec; } st_atime, st_mtime, st_ctime; - s32 st_blksize; - long long st_blocks; - char st_fstype[16]; - s32 st_pad4[8]; - } ks; - - if (!sysv_valid_dev(stat->dev) || !sysv_valid_dev(stat->rdev)) - return -EOVERFLOW; - - ks.st_dev = sysv_encode_dev(stat->dev); - ks.st_pad1[0] = ks.st_pad1[1] = ks.st_pad1[2] = 0; - ks.st_ino = (unsigned long long) stat->ino; - ks.st_mode = (u32) stat->mode; - ks.st_nlink = (u32) stat->nlink; - ks.st_uid = (s32) stat->uid; - ks.st_gid = (s32) stat->gid; - ks.st_rdev = sysv_encode_dev(stat->rdev); - ks.st_pad2[0] = ks.st_pad2[1] = 0; - ks.st_size = (long long) stat->size; - ks.st_pad3 = 0; - - /* XXX hackety hack... */ - ks.st_atime.tv_sec = (s32) stat->atime.tv_sec; - ks.st_atime.tv_nsec = stat->atime.tv_nsec; - ks.st_mtime.tv_sec = (s32) stat->mtime.tv_sec; - ks.st_mtime.tv_nsec = stat->mtime.tv_nsec; - ks.st_ctime.tv_sec = (s32) stat->ctime.tv_sec; - ks.st_ctime.tv_nsec = stat->ctime.tv_nsec; - - ks.st_blksize = (s32) stat->blksize; - ks.st_blocks = (long long) stat->blocks; - memset(ks.st_fstype, 0, 16); - ks.st_pad4[0] = ks.st_pad4[1] = ks.st_pad4[2] = ks.st_pad4[3] = 0; - ks.st_pad4[4] = ks.st_pad4[5] = ks.st_pad4[6] = ks.st_pad4[7] = 0; - - /* Now write it all back. */ - return copy_to_user(ubuf, &ks, sizeof(ks)) ? -EFAULT : 0; -} - -asmlinkage int irix_xstat(int version, char __user *filename, struct stat __user *statbuf) -{ - int retval; - struct kstat stat; - -#ifdef DEBUG_XSTAT - printk("[%s:%d] Wheee.. irix_xstat(%d,%s,%p) ", - current->comm, current->pid, version, filename, statbuf); -#endif - - retval = vfs_stat(filename, &stat); - if (!retval) { - switch(version) { - case 2: - retval = irix_xstat32_xlate(&stat, statbuf); - break; - case 3: - retval = irix_xstat64_xlate(&stat, statbuf); - break; - default: - retval = -EINVAL; - } - } - return retval; -} - -asmlinkage int irix_lxstat(int version, char __user *filename, struct stat __user *statbuf) -{ - int error; - struct kstat stat; - -#ifdef DEBUG_XSTAT - printk("[%s:%d] Wheee.. irix_lxstat(%d,%s,%p) ", - current->comm, current->pid, version, filename, statbuf); -#endif - - error = vfs_lstat(filename, &stat); - - if (!error) { - switch (version) { - case 2: - error = irix_xstat32_xlate(&stat, statbuf); - break; - case 3: - error = irix_xstat64_xlate(&stat, statbuf); - break; - default: - error = -EINVAL; - } - } - return error; -} - -asmlinkage int irix_fxstat(int version, int fd, struct stat __user *statbuf) -{ - int error; - struct kstat stat; - -#ifdef DEBUG_XSTAT - printk("[%s:%d] Wheee.. irix_fxstat(%d,%d,%p) ", - current->comm, current->pid, version, fd, statbuf); -#endif - - error = vfs_fstat(fd, &stat); - if (!error) { - switch (version) { - case 2: - error = irix_xstat32_xlate(&stat, statbuf); - break; - case 3: - error = irix_xstat64_xlate(&stat, statbuf); - break; - default: - error = -EINVAL; - } - } - return error; -} - -asmlinkage int irix_xmknod(int ver, char __user *filename, int mode, unsigned dev) -{ - int retval; - printk("[%s:%d] Wheee.. irix_xmknod(%d,%s,%x,%x)\n", - current->comm, current->pid, ver, filename, mode, dev); - - switch(ver) { - case 2: - /* shouldn't we convert here as well as on stat()? */ - retval = sys_mknod(filename, mode, dev); - break; - - default: - retval = -EINVAL; - break; - }; - - return retval; -} - -asmlinkage int irix_swapctl(int cmd, char __user *arg) -{ - printk("[%s:%d] Wheee.. irix_swapctl(%d,%p)\n", - current->comm, current->pid, cmd, arg); - - return -EINVAL; -} - -struct irix_statvfs { - u32 f_bsize; u32 f_frsize; u32 f_blocks; - u32 f_bfree; u32 f_bavail; u32 f_files; u32 f_ffree; u32 f_favail; - u32 f_fsid; char f_basetype[16]; - u32 f_flag; u32 f_namemax; - char f_fstr[32]; u32 f_filler[16]; -}; - -asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf) -{ - struct nameidata nd; - struct kstatfs kbuf; - int error, i; - - printk("[%s:%d] Wheee.. irix_statvfs(%s,%p)\n", - current->comm, current->pid, fname, buf); - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) - return -EFAULT; - - error = user_path_walk(fname, &nd); - if (error) - goto out; - error = vfs_statfs(nd.path.dentry, &kbuf); - if (error) - goto dput_and_out; - - error |= __put_user(kbuf.f_bsize, &buf->f_bsize); - error |= __put_user(kbuf.f_frsize, &buf->f_frsize); - error |= __put_user(kbuf.f_blocks, &buf->f_blocks); - error |= __put_user(kbuf.f_bfree, &buf->f_bfree); - error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ - error |= __put_user(kbuf.f_files, &buf->f_files); - error |= __put_user(kbuf.f_ffree, &buf->f_ffree); - error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ -#ifdef __MIPSEB__ - error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); -#else - error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); -#endif - for (i = 0; i < 16; i++) - error |= __put_user(0, &buf->f_basetype[i]); - error |= __put_user(0, &buf->f_flag); - error |= __put_user(kbuf.f_namelen, &buf->f_namemax); - for (i = 0; i < 32; i++) - error |= __put_user(0, &buf->f_fstr[i]); - -dput_and_out: - path_put(&nd.path); -out: - return error; -} - -asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs __user *buf) -{ - struct kstatfs kbuf; - struct file *file; - int error, i; - - printk("[%s:%d] Wheee.. irix_fstatvfs(%d,%p)\n", - current->comm, current->pid, fd, buf); - - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) - return -EFAULT; - - if (!(file = fget(fd))) { - error = -EBADF; - goto out; - } - error = vfs_statfs(file->f_path.dentry, &kbuf); - if (error) - goto out_f; - - error = __put_user(kbuf.f_bsize, &buf->f_bsize); - error |= __put_user(kbuf.f_frsize, &buf->f_frsize); - error |= __put_user(kbuf.f_blocks, &buf->f_blocks); - error |= __put_user(kbuf.f_bfree, &buf->f_bfree); - error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ - error |= __put_user(kbuf.f_files, &buf->f_files); - error |= __put_user(kbuf.f_ffree, &buf->f_ffree); - error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ -#ifdef __MIPSEB__ - error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); -#else - error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); -#endif - for(i = 0; i < 16; i++) - error |= __put_user(0, &buf->f_basetype[i]); - error |= __put_user(0, &buf->f_flag); - error |= __put_user(kbuf.f_namelen, &buf->f_namemax); - error |= __clear_user(&buf->f_fstr, sizeof(buf->f_fstr)) ? -EFAULT : 0; - -out_f: - fput(file); -out: - return error; -} - -asmlinkage int irix_priocntl(struct pt_regs *regs) -{ - printk("[%s:%d] Wheee.. irix_priocntl()\n", - current->comm, current->pid); - - return -EINVAL; -} - -asmlinkage int irix_sigqueue(int pid, int sig, int code, int val) -{ - printk("[%s:%d] Wheee.. irix_sigqueue(%d,%d,%d,%d)\n", - current->comm, current->pid, pid, sig, code, val); - - return -EINVAL; -} - -asmlinkage int irix_truncate64(char __user *name, int pad, int size1, int size2) -{ - int retval; - - if (size1) { - retval = -EINVAL; - goto out; - } - retval = sys_truncate(name, size2); - -out: - return retval; -} - -asmlinkage int irix_ftruncate64(int fd, int pad, int size1, int size2) -{ - int retval; - - if (size1) { - retval = -EINVAL; - goto out; - } - retval = sys_ftruncate(fd, size2); - -out: - return retval; -} - -asmlinkage int irix_mmap64(struct pt_regs *regs) -{ - int len, prot, flags, fd, off1, off2, error, base = 0; - unsigned long addr, pgoff, *sp; - struct file *file = NULL; - int err; - - if (regs->regs[2] == 1000) - base = 1; - sp = (unsigned long *) (regs->regs[29] + 16); - addr = regs->regs[base + 4]; - len = regs->regs[base + 5]; - prot = regs->regs[base + 6]; - if (!base) { - flags = regs->regs[base + 7]; - if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long)))) - return -EFAULT; - fd = sp[0]; - err = __get_user(off1, &sp[1]); - err |= __get_user(off2, &sp[2]); - } else { - if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long)))) - return -EFAULT; - err = __get_user(flags, &sp[0]); - err |= __get_user(fd, &sp[1]); - err |= __get_user(off1, &sp[2]); - err |= __get_user(off2, &sp[3]); - } - - if (err) - return err; - - if (off1 & PAGE_MASK) - return -EOVERFLOW; - - pgoff = (off1 << (32 - PAGE_SHIFT)) | (off2 >> PAGE_SHIFT); - - if (!(flags & MAP_ANONYMOUS)) { - if (!(file = fget(fd))) - return -EBADF; - - /* Ok, bad taste hack follows, try to think in something else - when reading this */ - if (flags & IRIX_MAP_AUTOGROW) { - unsigned long old_pos; - long max_size = off2 + len; - - if (max_size > file->f_path.dentry->d_inode->i_size) { - old_pos = sys_lseek(fd, max_size - 1, 0); - sys_write(fd, (void __user *) "", 1); - sys_lseek(fd, old_pos, 0); - } - } - } - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); - - return error; -} - -asmlinkage int irix_dmi(struct pt_regs *regs) -{ - printk("[%s:%d] Wheee.. irix_dmi()\n", - current->comm, current->pid); - - return -EINVAL; -} - -asmlinkage int irix_pread(int fd, char __user *buf, int cnt, int off64, - int off1, int off2) -{ - printk("[%s:%d] Wheee.. irix_pread(%d,%p,%d,%d,%d,%d)\n", - current->comm, current->pid, fd, buf, cnt, off64, off1, off2); - - return -EINVAL; -} - -asmlinkage int irix_pwrite(int fd, char __user *buf, int cnt, int off64, - int off1, int off2) -{ - printk("[%s:%d] Wheee.. irix_pwrite(%d,%p,%d,%d,%d,%d)\n", - current->comm, current->pid, fd, buf, cnt, off64, off1, off2); - - return -EINVAL; -} - -asmlinkage int irix_sgifastpath(int cmd, unsigned long arg0, unsigned long arg1, - unsigned long arg2, unsigned long arg3, - unsigned long arg4, unsigned long arg5) -{ - printk("[%s:%d] Wheee.. irix_fastpath(%d,%08lx,%08lx,%08lx,%08lx," - "%08lx,%08lx)\n", - current->comm, current->pid, cmd, arg0, arg1, arg2, - arg3, arg4, arg5); - - return -EINVAL; -} - -struct irix_statvfs64 { - u32 f_bsize; u32 f_frsize; - u64 f_blocks; u64 f_bfree; u64 f_bavail; - u64 f_files; u64 f_ffree; u64 f_favail; - u32 f_fsid; - char f_basetype[16]; - u32 f_flag; u32 f_namemax; - char f_fstr[32]; - u32 f_filler[16]; -}; - -asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *buf) -{ - struct nameidata nd; - struct kstatfs kbuf; - int error, i; - - printk("[%s:%d] Wheee.. irix_statvfs64(%s,%p)\n", - current->comm, current->pid, fname, buf); - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs64))) { - error = -EFAULT; - goto out; - } - - error = user_path_walk(fname, &nd); - if (error) - goto out; - error = vfs_statfs(nd.path.dentry, &kbuf); - if (error) - goto dput_and_out; - - error = __put_user(kbuf.f_bsize, &buf->f_bsize); - error |= __put_user(kbuf.f_frsize, &buf->f_frsize); - error |= __put_user(kbuf.f_blocks, &buf->f_blocks); - error |= __put_user(kbuf.f_bfree, &buf->f_bfree); - error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ - error |= __put_user(kbuf.f_files, &buf->f_files); - error |= __put_user(kbuf.f_ffree, &buf->f_ffree); - error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ -#ifdef __MIPSEB__ - error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); -#else - error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); -#endif - for(i = 0; i < 16; i++) - error |= __put_user(0, &buf->f_basetype[i]); - error |= __put_user(0, &buf->f_flag); - error |= __put_user(kbuf.f_namelen, &buf->f_namemax); - for(i = 0; i < 32; i++) - error |= __put_user(0, &buf->f_fstr[i]); - -dput_and_out: - path_put(&nd.path); -out: - return error; -} - -asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs __user *buf) -{ - struct kstatfs kbuf; - struct file *file; - int error, i; - - printk("[%s:%d] Wheee.. irix_fstatvfs64(%d,%p)\n", - current->comm, current->pid, fd, buf); - - if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) { - error = -EFAULT; - goto out; - } - if (!(file = fget(fd))) { - error = -EBADF; - goto out; - } - error = vfs_statfs(file->f_path.dentry, &kbuf); - if (error) - goto out_f; - - error = __put_user(kbuf.f_bsize, &buf->f_bsize); - error |= __put_user(kbuf.f_frsize, &buf->f_frsize); - error |= __put_user(kbuf.f_blocks, &buf->f_blocks); - error |= __put_user(kbuf.f_bfree, &buf->f_bfree); - error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */ - error |= __put_user(kbuf.f_files, &buf->f_files); - error |= __put_user(kbuf.f_ffree, &buf->f_ffree); - error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */ -#ifdef __MIPSEB__ - error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid); -#else - error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid); -#endif - for(i = 0; i < 16; i++) - error |= __put_user(0, &buf->f_basetype[i]); - error |= __put_user(0, &buf->f_flag); - error |= __put_user(kbuf.f_namelen, &buf->f_namemax); - error |= __clear_user(buf->f_fstr, sizeof(buf->f_fstr[i])) ? -EFAULT : 0; - -out_f: - fput(file); -out: - return error; -} - -asmlinkage int irix_getmountid(char __user *fname, unsigned long __user *midbuf) -{ - int err; - - printk("[%s:%d] irix_getmountid(%s, %p)\n", - current->comm, current->pid, fname, midbuf); - if (!access_ok(VERIFY_WRITE, midbuf, (sizeof(unsigned long) * 4))) - return -EFAULT; - - /* - * The idea with this system call is that when trying to determine - * 'pwd' and it's a toss-up for some reason, userland can use the - * fsid of the filesystem to try and make the right decision, but - * we don't have this so for now. XXX - */ - err = __put_user(0, &midbuf[0]); - err |= __put_user(0, &midbuf[1]); - err |= __put_user(0, &midbuf[2]); - err |= __put_user(0, &midbuf[3]); - - return err; -} - -asmlinkage int irix_nsproc(unsigned long entry, unsigned long mask, - unsigned long arg, unsigned long sp, int slen) -{ - printk("[%s:%d] Wheee.. irix_nsproc(%08lx,%08lx,%08lx,%08lx,%d)\n", - current->comm, current->pid, entry, mask, arg, sp, slen); - - return -EINVAL; -} - -#undef DEBUG_GETDENTS - -struct irix_dirent32 { - u32 d_ino; - u32 d_off; - unsigned short d_reclen; - char d_name[1]; -}; - -struct irix_dirent32_callback { - struct irix_dirent32 __user *current_dir; - struct irix_dirent32 __user *previous; - int count; - int error; -}; - -#define NAME_OFFSET32(de) ((int) ((de)->d_name - (char *) (de))) -#define ROUND_UP32(x) (((x)+sizeof(u32)-1) & ~(sizeof(u32)-1)) - -static int irix_filldir32(void *__buf, const char *name, - int namlen, loff_t offset, u64 ino, unsigned int d_type) -{ - struct irix_dirent32 __user *dirent; - struct irix_dirent32_callback *buf = __buf; - unsigned short reclen = ROUND_UP32(NAME_OFFSET32(dirent) + namlen + 1); - int err = 0; - u32 d_ino; - -#ifdef DEBUG_GETDENTS - printk("\nirix_filldir32[reclen<%d>namlen<%d>count<%d>]", - reclen, namlen, buf->count); -#endif - buf->error = -EINVAL; /* only used if we fail.. */ - if (reclen > buf->count) - return -EINVAL; - d_ino = ino; - if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) - return -EOVERFLOW; - dirent = buf->previous; - if (dirent) - err = __put_user(offset, &dirent->d_off); - dirent = buf->current_dir; - err |= __put_user(dirent, &buf->previous); - err |= __put_user(d_ino, &dirent->d_ino); - err |= __put_user(reclen, &dirent->d_reclen); - err |= copy_to_user((char __user *)dirent->d_name, name, namlen) ? -EFAULT : 0; - err |= __put_user(0, &dirent->d_name[namlen]); - dirent = (struct irix_dirent32 __user *) ((char __user *) dirent + reclen); - - buf->current_dir = dirent; - buf->count -= reclen; - - return err; -} - -asmlinkage int irix_ngetdents(unsigned int fd, void __user * dirent, - unsigned int count, int __user *eob) -{ - struct file *file; - struct irix_dirent32 __user *lastdirent; - struct irix_dirent32_callback buf; - int error; - -#ifdef DEBUG_GETDENTS - printk("[%s:%d] ngetdents(%d, %p, %d, %p) ", current->comm, - current->pid, fd, dirent, count, eob); -#endif - error = -EBADF; - file = fget(fd); - if (!file) - goto out; - - buf.current_dir = (struct irix_dirent32 __user *) dirent; - buf.previous = NULL; - buf.count = count; - buf.error = 0; - - error = vfs_readdir(file, irix_filldir32, &buf); - if (error < 0) - goto out_putf; - - error = buf.error; - lastdirent = buf.previous; - if (lastdirent) { - put_user(file->f_pos, &lastdirent->d_off); - error = count - buf.count; - } - - if (put_user(0, eob) < 0) { - error = -EFAULT; - goto out_putf; - } - -#ifdef DEBUG_GETDENTS - printk("eob=%d returning %d\n", *eob, count - buf.count); -#endif - error = count - buf.count; - -out_putf: - fput(file); -out: - return error; -} - -struct irix_dirent64 { - u64 d_ino; - u64 d_off; - unsigned short d_reclen; - char d_name[1]; -}; - -struct irix_dirent64_callback { - struct irix_dirent64 __user *curr; - struct irix_dirent64 __user *previous; - int count; - int error; -}; - -#define NAME_OFFSET64(de) ((int) ((de)->d_name - (char *) (de))) -#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1)) - -static int irix_filldir64(void *__buf, const char *name, - int namlen, loff_t offset, u64 ino, unsigned int d_type) -{ - struct irix_dirent64 __user *dirent; - struct irix_dirent64_callback * buf = __buf; - unsigned short reclen = ROUND_UP64(NAME_OFFSET64(dirent) + namlen + 1); - int err = 0; - - if (!access_ok(VERIFY_WRITE, buf, sizeof(*buf))) - return -EFAULT; - - if (__put_user(-EINVAL, &buf->error)) /* only used if we fail.. */ - return -EFAULT; - if (reclen > buf->count) - return -EINVAL; - dirent = buf->previous; - if (dirent) - err = __put_user(offset, &dirent->d_off); - dirent = buf->curr; - buf->previous = dirent; - err |= __put_user(ino, &dirent->d_ino); - err |= __put_user(reclen, &dirent->d_reclen); - err |= __copy_to_user((char __user *)dirent->d_name, name, namlen) - ? -EFAULT : 0; - err |= __put_user(0, &dirent->d_name[namlen]); - - dirent = (struct irix_dirent64 __user *) ((char __user *) dirent + reclen); - - buf->curr = dirent; - buf->count -= reclen; - - return err; -} - -asmlinkage int irix_getdents64(int fd, void __user *dirent, int cnt) -{ - struct file *file; - struct irix_dirent64 __user *lastdirent; - struct irix_dirent64_callback buf; - int error; - -#ifdef DEBUG_GETDENTS - printk("[%s:%d] getdents64(%d, %p, %d) ", current->comm, - current->pid, fd, dirent, cnt); -#endif - error = -EBADF; - if (!(file = fget(fd))) - goto out; - - error = -EFAULT; - if (!access_ok(VERIFY_WRITE, dirent, cnt)) - goto out_f; - - error = -EINVAL; - if (cnt < (sizeof(struct irix_dirent64) + 255)) - goto out_f; - - buf.curr = (struct irix_dirent64 __user *) dirent; - buf.previous = NULL; - buf.count = cnt; - buf.error = 0; - error = vfs_readdir(file, irix_filldir64, &buf); - if (error < 0) - goto out_f; - lastdirent = buf.previous; - if (!lastdirent) { - error = buf.error; - goto out_f; - } - if (put_user(file->f_pos, &lastdirent->d_off)) - return -EFAULT; -#ifdef DEBUG_GETDENTS - printk("returning %d\n", cnt - buf.count); -#endif - error = cnt - buf.count; - -out_f: - fput(file); -out: - return error; -} - -asmlinkage int irix_ngetdents64(int fd, void __user *dirent, int cnt, int *eob) -{ - struct file *file; - struct irix_dirent64 __user *lastdirent; - struct irix_dirent64_callback buf; - int error; - -#ifdef DEBUG_GETDENTS - printk("[%s:%d] ngetdents64(%d, %p, %d) ", current->comm, - current->pid, fd, dirent, cnt); -#endif - error = -EBADF; - if (!(file = fget(fd))) - goto out; - - error = -EFAULT; - if (!access_ok(VERIFY_WRITE, dirent, cnt) || - !access_ok(VERIFY_WRITE, eob, sizeof(*eob))) - goto out_f; - - error = -EINVAL; - if (cnt < (sizeof(struct irix_dirent64) + 255)) - goto out_f; - - *eob = 0; - buf.curr = (struct irix_dirent64 __user *) dirent; - buf.previous = NULL; - buf.count = cnt; - buf.error = 0; - error = vfs_readdir(file, irix_filldir64, &buf); - if (error < 0) - goto out_f; - lastdirent = buf.previous; - if (!lastdirent) { - error = buf.error; - goto out_f; - } - if (put_user(file->f_pos, &lastdirent->d_off)) - return -EFAULT; -#ifdef DEBUG_GETDENTS - printk("eob=%d returning %d\n", *eob, cnt - buf.count); -#endif - error = cnt - buf.count; - -out_f: - fput(file); -out: - return error; -} - -asmlinkage int irix_uadmin(unsigned long op, unsigned long func, unsigned long arg) -{ - int retval; - - switch (op) { - case 1: - /* Reboot */ - printk("[%s:%d] irix_uadmin: Wants to reboot...\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 2: - /* Shutdown */ - printk("[%s:%d] irix_uadmin: Wants to shutdown...\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 4: - /* Remount-root */ - printk("[%s:%d] irix_uadmin: Wants to remount root...\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 8: - /* Kill all tasks. */ - printk("[%s:%d] irix_uadmin: Wants to kill all tasks...\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 256: - /* Set magic mushrooms... */ - printk("[%s:%d] irix_uadmin: Wants to set magic mushroom[%d]...\n", - current->comm, current->pid, (int) func); - retval = -EINVAL; - goto out; - - default: - printk("[%s:%d] irix_uadmin: Unknown operation [%d]...\n", - current->comm, current->pid, (int) op); - retval = -EINVAL; - goto out; - }; - -out: - return retval; -} - -asmlinkage int irix_utssys(char __user *inbuf, int arg, int type, char __user *outbuf) -{ - int retval; - - switch(type) { - case 0: - /* uname() */ - retval = irix_uname((struct iuname __user *)inbuf); - goto out; - - case 2: - /* ustat() */ - printk("[%s:%d] irix_utssys: Wants to do ustat()\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 3: - /* fusers() */ - printk("[%s:%d] irix_utssys: Wants to do fusers()\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - default: - printk("[%s:%d] irix_utssys: Wants to do unknown type[%d]\n", - current->comm, current->pid, (int) type); - retval = -EINVAL; - goto out; - } - -out: - return retval; -} - -#undef DEBUG_FCNTL - -#define IRIX_F_ALLOCSP 10 - -asmlinkage int irix_fcntl(int fd, int cmd, int arg) -{ - int retval; - -#ifdef DEBUG_FCNTL - printk("[%s:%d] irix_fcntl(%d, %d, %d) ", current->comm, - current->pid, fd, cmd, arg); -#endif - if (cmd == IRIX_F_ALLOCSP){ - return 0; - } - retval = sys_fcntl(fd, cmd, arg); -#ifdef DEBUG_FCNTL - printk("%d\n", retval); -#endif - return retval; -} - -asmlinkage int irix_ulimit(int cmd, int arg) -{ - int retval; - - switch(cmd) { - case 1: - printk("[%s:%d] irix_ulimit: Wants to get file size limit.\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 2: - printk("[%s:%d] irix_ulimit: Wants to set file size limit.\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 3: - printk("[%s:%d] irix_ulimit: Wants to get brk limit.\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - case 4: -#if 0 - printk("[%s:%d] irix_ulimit: Wants to get fd limit.\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; -#endif - retval = current->signal->rlim[RLIMIT_NOFILE].rlim_cur; - goto out; - - case 5: - printk("[%s:%d] irix_ulimit: Wants to get txt offset.\n", - current->comm, current->pid); - retval = -EINVAL; - goto out; - - default: - printk("[%s:%d] irix_ulimit: Unknown command [%d].\n", - current->comm, current->pid, cmd); - retval = -EINVAL; - goto out; - } -out: - return retval; -} - -asmlinkage int irix_unimp(struct pt_regs *regs) -{ - printk("irix_unimp [%s:%d] v0=%d v1=%d a0=%08lx a1=%08lx a2=%08lx " - "a3=%08lx\n", current->comm, current->pid, - (int) regs->regs[2], (int) regs->regs[3], - regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]); - - return -ENOSYS; -} diff --git a/include/asm-mips/inventory.h b/include/asm-mips/inventory.h deleted file mode 100644 index cc88aed23f0f..000000000000 --- a/include/asm-mips/inventory.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Miguel de Icaza - */ -#ifndef __ASM_INVENTORY_H -#define __ASM_INVENTORY_H - -#include - -typedef struct inventory_s { - struct inventory_s *inv_next; - int inv_class; - int inv_type; - int inv_controller; - int inv_unit; - int inv_state; -} inventory_t; - -extern int inventory_items; - -extern void add_to_inventory(int class, int type, int controller, int unit, int state); -extern int dump_inventory_to_user(void __user *userbuf, int size); -extern int __init init_inventory(void); - -#endif /* __ASM_INVENTORY_H */ diff --git a/include/asm-mips/namei.h b/include/asm-mips/namei.h index c94d12d1f868..a6605a752469 100644 --- a/include/asm-mips/namei.h +++ b/include/asm-mips/namei.h @@ -1,26 +1,11 @@ #ifndef _ASM_NAMEI_H #define _ASM_NAMEI_H -#include -#include +/* + * This dummy routine maybe changed to something useful + * for /usr/gnemul/ emulation stuff. + */ -#define IRIX_EMUL "/usr/gnemul/irix/" -#define RISCOS_EMUL "/usr/gnemul/riscos/" - -static inline char *__emul_prefix(void) -{ - switch (current->personality) { - case PER_IRIX32: - case PER_IRIXN32: - case PER_IRIX64: - return IRIX_EMUL; - - case PER_RISCOS: - return RISCOS_EMUL; - - default: - return NULL; - } -} +#define __emul_prefix() NULL #endif /* _ASM_NAMEI_H */ diff --git a/include/asm-mips/prctl.h b/include/asm-mips/prctl.h deleted file mode 100644 index 8121a9a75bfd..000000000000 --- a/include/asm-mips/prctl.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * IRIX prctl interface - * - * The IRIX kernel maps a page at PRDA_ADDRESS with the - * contents of prda and fills it the bits on prda_sys. - */ - -#ifndef __PRCTL_H__ -#define __PRCTL_H__ - -#define PRDA_ADDRESS 0x200000L -#define PRDA ((struct prda *) PRDA_ADDRESS) - -struct prda_sys { - pid_t t_pid; - u32 t_hint; - u32 t_dlactseq; - u32 t_fpflags; - u32 t_prid; /* processor type, $prid CP0 register */ - u32 t_dlendseq; - u64 t_unused1[5]; - pid_t t_rpid; - s32 t_resched; - u32 t_unused[8]; - u32 t_cpu; /* current/last cpu */ - - /* FIXME: The signal information, not supported by Linux now */ - u32 t_flags; /* if true, then the sigprocmask is in userspace */ - u32 t_sigprocmask [1]; /* the sigprocmask */ -}; - -struct prda { - char fill [0xe00]; - struct prda_sys prda_sys; -}; - -#define t_sys prda_sys - -ptrdiff_t prctl(int op, int v1, int v2); - -#endif diff --git a/include/asm-mips/signal.h b/include/asm-mips/signal.h index 7a28989f7ee3..bee5153aca48 100644 --- a/include/asm-mips/signal.h +++ b/include/asm-mips/signal.h @@ -119,9 +119,6 @@ struct sigaction { struct k_sigaction { struct sigaction sa; -#ifdef CONFIG_BINFMT_IRIX - void (*sa_restorer)(void); -#endif }; /* IRIX compatible stack_t */ -- cgit v1.2.3 From 52f4f6bbcff5510f662a002ec1219660ea25af62 Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Thu, 12 Jun 2008 15:20:05 -0400 Subject: [MIPS] Use kernel-supplied ARRAY_SIZE() macro. Signed-off-by: Robert P. J. Day Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/malta/malta_int.c | 2 +- arch/mips/sgi-ip22/ip28-berr.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index 8c495104b321..4b5694e19d33 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -527,7 +527,7 @@ void __init arch_init_irq(void) .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3 } }; -#define NIPI (sizeof(ipiirq)/sizeof(ipiirq[0])) +#define NIPI ARRAY_SIZE(ipiirq) fill_ipi_map(); gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); if (!gcmp_present) { diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c index 30e12e2ec4b5..fee7a2e0e538 100644 --- a/arch/mips/sgi-ip22/ip28-berr.c +++ b/arch/mips/sgi-ip22/ip28-berr.c @@ -412,7 +412,7 @@ static int ip28_be_interrupt(const struct pt_regs *regs) * Now we have an asynchronous bus error, speculatively or DMA caused. * Need to search all DMA descriptors for the error address. */ - for (i = 0; i < sizeof(hpc3)/sizeof(struct hpc3_stat); ++i) { + for (i = 0; i < ARRAY_SIZE(hpc3); ++i) { struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i; if ((cpu_err_stat & CPU_ERRMASK) && (cpu_err_addr == hp->ndptr || cpu_err_addr == hp->cbp)) @@ -421,7 +421,7 @@ static int ip28_be_interrupt(const struct pt_regs *regs) (gio_err_addr == hp->ndptr || gio_err_addr == hp->cbp)) break; } - if (i < sizeof(hpc3)/sizeof(struct hpc3_stat)) { + if (i < ARRAY_SIZE(hpc3)) { struct hpc3_stat *hp = (struct hpc3_stat *)&hpc3 + i; printk(KERN_ERR "at DMA addresses: HPC3 @ %08lx:" " ctl %08x, ndp %08x, cbp %08x\n", -- cgit v1.2.3 From 043ebd6c9de7500a399017643bbc5cafd4e37060 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 13 Jun 2008 00:25:36 +0100 Subject: [MIPS] DECstation: Document more MB ASIC register bits Document a few more register bits provided by the MB ASIC used on R4000SC (KN04) and R4400SC (KN05) CPU daughtercards with the DECstation. Reverse-engineered and not documented anywhere else to the best of my knowledge. Bit names appended to the last underscore the same as reported by the firmware in register dumps. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle --- include/asm-mips/dec/kn05.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/include/asm-mips/dec/kn05.h b/include/asm-mips/dec/kn05.h index 15fe8f881e60..56d22dc8803a 100644 --- a/include/asm-mips/dec/kn05.h +++ b/include/asm-mips/dec/kn05.h @@ -6,7 +6,7 @@ * KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC * definitions. * - * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki + * Copyright (C) 2002, 2003, 2005, 2008 Maciej W. Rozycki * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -54,11 +54,11 @@ */ #define KN4K_MB_INT_TC (1<<0) /* TURBOchannel? */ #define KN4K_MB_INT_RTC (1<<1) /* RTC? */ -#define KN4K_MB_INT_MT (1<<3) /* ??? */ +#define KN4K_MB_INT_MT (1<<3) /* I/O ASIC cascade */ /* * Bits for the MB control & status register. - * Set to 0x00bf8001 on my system by the ROM. + * Set to 0x00bf8001 for KN05 and to 0x003f8000 for KN04 by the firmware. */ #define KN4K_MB_CSR_PF (1<<0) /* PreFetching enable? */ #define KN4K_MB_CSR_F (1<<1) /* ??? */ @@ -69,7 +69,8 @@ #define KN4K_MB_CSR_IM (1<<13) /* ??? */ #define KN4K_MB_CSR_NC (1<<14) /* ??? */ #define KN4K_MB_CSR_EE (1<<15) /* (bus) Exception Enable? */ -#define KN4K_MB_CSR_MSK (0x1f<<16) /* ??? */ +#define KN4K_MB_CSR_MSK (0x1f<<16) /* CPU Int[4:0] mask */ #define KN4K_MB_CSR_FW (1<<21) /* ??? */ +#define KN4K_MB_CSR_W (1<<31) /* ??? */ #endif /* __ASM_MIPS_DEC_KN05_H */ -- cgit v1.2.3 From 94daeb90698c56a85ed219eeb18d4a8cddde7b03 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 11 Jun 2008 10:04:25 -0700 Subject: [MIPS] Fix asm constraints for 'ins' instructions. The third operand to 'ins' must be a constant int, not a register. [Ralf: The bug was actually intensional. Some versions used to throw an error under certain circumstances for code like: static inline void f(unsigned nr, unsigned *p) { unsigned short bit = nr & 5; if (__builtin_constant_p(bit)) { __asm__ __volatile__ (" foo %0, %1" : "=m" (*p) : "i" (bit)); } else { /* Do something else. */ } } because gcc was not able to figure out that the "i" constraint was possibly at the early stage when the constraint are getting verified. The solution was using "ri" instead of "i". The "ri" would keep gcc happy but in the end for code generation always the "i" constraint would be satisfied. The problem afair originally appeared in the i386 io.h and also hit it's mips equivalent. From there the workaround spread to many of the inline assembler functions.] Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- include/asm-mips/bitops.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h index 642724734eba..9a7274ba6a0b 100644 --- a/include/asm-mips/bitops.h +++ b/include/asm-mips/bitops.h @@ -82,7 +82,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) "2: b 1b \n" " .previous \n" : "=&r" (temp), "=m" (*m) - : "ir" (bit), "m" (*m), "r" (~0)); + : "i" (bit), "m" (*m), "r" (~0)); #endif /* CONFIG_CPU_MIPSR2 */ } else if (cpu_has_llsc) { __asm__ __volatile__( @@ -147,7 +147,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) "2: b 1b \n" " .previous \n" : "=&r" (temp), "=m" (*m) - : "ir" (bit), "m" (*m)); + : "i" (bit), "m" (*m)); #endif /* CONFIG_CPU_MIPSR2 */ } else if (cpu_has_llsc) { __asm__ __volatile__( @@ -428,7 +428,7 @@ static inline int test_and_clear_bit(unsigned long nr, "2: b 1b \n" " .previous \n" : "=&r" (temp), "=m" (*m), "=&r" (res) - : "ri" (bit), "m" (*m) + : "i" (bit), "m" (*m) : "memory"); #endif } else if (cpu_has_llsc) { -- cgit v1.2.3 From f2bc713f15103372c0efab5fc09dd813655c5096 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 26 Jun 2008 21:52:51 +0900 Subject: [MIPS] Cobalt: Register new LCD platform device. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/cobalt/Makefile | 2 +- arch/mips/cobalt/lcd.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 1 deletion(-) create mode 100644 arch/mips/cobalt/lcd.c diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile index d73833b7c781..237926288d6d 100644 --- a/arch/mips/cobalt/Makefile +++ b/arch/mips/cobalt/Makefile @@ -2,7 +2,7 @@ # Makefile for the Cobalt micro systems family specific parts of the kernel # -obj-y := buttons.o irq.o led.o reset.o rtc.o serial.o setup.o time.o +obj-y := buttons.o irq.o lcd.o led.o reset.o rtc.o serial.o setup.o time.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_EARLY_PRINTK) += console.o diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c new file mode 100644 index 000000000000..0720e4fae311 --- /dev/null +++ b/arch/mips/cobalt/lcd.c @@ -0,0 +1,55 @@ +/* + * Registration of Cobalt LCD platform device. + * + * Copyright (C) 2008 Yoichi Yuasa + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include +#include + +static struct resource cobalt_lcd_resource __initdata = { + .start = 0x1f000000, + .end = 0x1f00001f, + .flags = IORESOURCE_MEM, +}; + +static __init int cobalt_lcd_add(void) +{ + struct platform_device *pdev; + int retval; + + pdev = platform_device_alloc("cobalt-lcd", -1); + if (!pdev) + return -ENOMEM; + + retval = platform_device_add_resources(pdev, &cobalt_lcd_resource, 1); + if (retval) + goto err_free_device; + + retval = platform_device_add(pdev); + if (retval) + goto err_free_device; + + return 0; + +err_free_device: + platform_device_put(pdev); + + return retval; +} +device_initcall(cobalt_lcd_add); -- cgit v1.2.3 From 8736595bb2b0ce6188ca31308c40921f3f02f35b Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Wed, 2 Jul 2008 21:06:03 +0200 Subject: [MIPS] Enable FAST-20 for onboard scsi Both onboard controller of the O2 support FAST-20 transfer speeds, but the bit, which signals that to the aic driver, isn't set. Instead of adding detection code to the scsi driver, we just fake the missing bit in the PCI config space of the scsi chips. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/pci/ops-mace.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/mips/pci/ops-mace.c b/arch/mips/pci/ops-mace.c index e95881897ec9..1cfb5588699f 100644 --- a/arch/mips/pci/ops-mace.c +++ b/arch/mips/pci/ops-mace.c @@ -61,6 +61,13 @@ mace_pci_read_config(struct pci_bus *bus, unsigned int devfn, /* ack possible master abort */ mace->pci.error &= ~MACEPCI_ERROR_MASTER_ABORT; mace->pci.control = control; + /* + * someone forgot to set the ultra bit for the onboard + * scsi chips; we fake it here + */ + if (bus->number == 0 && reg == 0x40 && size == 4 && + (devfn == (1 << 3) || devfn == (2 << 3))) + *val |= 0x1000; DPRINTK("read%d: reg=%08x,val=%02x\n", size * 8, reg, *val); -- cgit v1.2.3 From 1ea6428cbdbb0fd1a6e7e8c3044253eab9aff4c7 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Wed, 18 Jun 2008 10:18:19 +0300 Subject: [MIPS] i8253: make the pit_clockevent variable static The pit_clockevent symbol is needlessly defined global. This patch makes that variable static. Spotted by sparse. Compile-tested using Malta defconfig. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/kernel/i8253.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index 38fa1a194bf4..b6ac55162b9a 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -80,7 +80,7 @@ static int pit_next_event(unsigned long delta, struct clock_event_device *evt) * registered. This mechanism replaces the previous #ifdef LOCAL_APIC - * !using_apic_timer decisions in do_timer_interrupt_hook() */ -struct clock_event_device pit_clockevent = { +static struct clock_event_device pit_clockevent = { .name = "pit", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = init_pit_timer, -- cgit v1.2.3 From d58eaab5a01b9cf1819ec57271ac214a39bf6278 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Wed, 18 Jun 2008 10:18:20 +0300 Subject: [MIPS] Namespace clean-up in arch/mips/pci/pci.c The following symbols hose_head hose_tail are needlessly defined global in arch/mips/pci/pci.c, and this patch makes them static. The variable pci_isa_hose is not used, and is removed by this patch. Spotted by namespacecheck. Tested by booting a Malta 4Kc board up to the shell prompt. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/pci/pci.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 358ad6210949..d7d6cb063d26 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -29,8 +29,7 @@ unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES; * The PCI controller list. */ -struct pci_controller *hose_head, **hose_tail = &hose_head; -struct pci_controller *pci_isa_hose; +static struct pci_controller *hose_head, **hose_tail = &hose_head; unsigned long PCIBIOS_MIN_IO = 0x0000; unsigned long PCIBIOS_MIN_MEM = 0; -- cgit v1.2.3 From 7afed6a6c92fadedde8474bbfd92d6debc5e23b0 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Wed, 18 Jun 2008 10:18:21 +0300 Subject: [MIPS] A few cleanups in malta_int.c Both the fill_ipi_map() routine and the gic_intr_map array defined in arch/mips/mips-boards/malta/malta_int.c are not used outside of the latter file. Thus, these objects can become static. Moreover, these two objects are used by the MT code only, which is why this patch adds the appropriate ifdef. While at it, this patch removes an unnecessary preprocessing macro in favor of the commonly used ARRAY_SIZE. Successfully tested using a Qemu-emulated Malta board for both SMP and UP kernels. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/malta/malta_int.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index 4b5694e19d33..b393982c0cc0 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -363,6 +363,7 @@ static msc_irqmap_t __initdata msc_eicirqmap[] = { static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); +#if defined(CONFIG_MIPS_MT_SMP) /* * This GIC specific tabular array defines the association between External * Interrupts and CPUs/Core Interrupts. The nature of the External @@ -394,6 +395,7 @@ static struct gic_intr_map gic_intr_map[] = { { GIC_EXT_INTR(22), 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, { GIC_EXT_INTR(23), 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, }; +#endif /* * GCMP needs to be detected before any SMP initialisation @@ -412,7 +414,8 @@ int __init gcmp_probe(unsigned long addr, unsigned long size) return gcmp_present; } -void __init fill_ipi_map(void) +#if defined(CONFIG_MIPS_MT_SMP) +static void __init fill_ipi_map(void) { int i; @@ -422,6 +425,7 @@ void __init fill_ipi_map(void) (1 << (gic_intr_map[i].pin + 2)); } } +#endif void __init arch_init_irq(void) { @@ -527,7 +531,6 @@ void __init arch_init_irq(void) .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3 } }; -#define NIPI ARRAY_SIZE(ipiirq) fill_ipi_map(); gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); if (!gcmp_present) { @@ -549,7 +552,7 @@ void __init arch_init_irq(void) printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status()); write_c0_status(0x1100dc00); printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); - for (i = 0; i < NIPI; i++) { + for (i = 0; i < ARRAY_SIZE(ipiirq); i++) { setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched); setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call); -- cgit v1.2.3 From 6ccab43b49beced70d8663b47ab471c4a23cb580 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Wed, 18 Jun 2008 10:18:22 +0300 Subject: [MIPS] Make gcmp_probe() static The gcmp_probe() function is needlessly defined global, and this patch makes it static. Tested by booting a Malta 4Kc board up to the shell prompt. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/malta/malta_int.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index b393982c0cc0..ea176113fea9 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -400,7 +400,7 @@ static struct gic_intr_map gic_intr_map[] = { /* * GCMP needs to be detected before any SMP initialisation */ -int __init gcmp_probe(unsigned long addr, unsigned long size) +static int __init gcmp_probe(unsigned long addr, unsigned long size) { if (gcmp_present >= 0) return gcmp_present; -- cgit v1.2.3 From c3dd3de789630b9b1ac8f5175f1c21bbf1cca939 Mon Sep 17 00:00:00 2001 From: Dmitri Vorobiev Date: Wed, 18 Jun 2008 10:18:23 +0300 Subject: [MIPS] Add an appropriate header into display.c The following errors were caught by sparse: >>>>>>>>>>> arch/mips/mips-boards/generic/display.c:30:6: warning: symbol 'mips_display_message' was not declared. Should it be static? arch/mips/mips-boards/generic/display.c:58:6: warning: symbol 'mips_scroll_message' was not declared. Should it be static? >>>>>>>>>>> This patch includes the asm/mips-boards/prom.h header file into arch/mips/mips-boards/generic/display.c. This adds the needed function declarations, and the errors are gone. Compile-tested using defconfigs for Malta, Atlas and SEAD boards. Runtime test was successfully performed by booting a Malta 4Kc board up to the shell prompt. Signed-off-by: Dmitri Vorobiev Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/display.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mips-boards/generic/display.c index 2a0057cfc30d..7c8828fcb0ad 100644 --- a/arch/mips/mips-boards/generic/display.c +++ b/arch/mips/mips-boards/generic/display.c @@ -22,6 +22,7 @@ #include #include #include +#include extern const char display_string[]; static unsigned int display_count; -- cgit v1.2.3 From 7a2852e49fe2d19296812c0f0f833b0ee3043bbb Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 18 Mar 2008 22:47:56 +0100 Subject: [MIPS] IP28: switch to "normal" mode after PROM no longer needed SGI-IP28 is running in so called slow mode, when kernel is started from the PROM. PROM calls must be done in slow mode otherwise the PROM will issue an error. To get better memory performance we now switch to normal mode, when the PROM is no longer needed. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip22/ip22-mc.c | 26 ++++++++++++++++++++++++++ include/asm-mips/barrier.h | 14 ++++++++++++++ 2 files changed, 40 insertions(+) diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c index 3f35d6367bec..5268ac187bbd 100644 --- a/arch/mips/sgi-ip22/ip22-mc.c +++ b/arch/mips/sgi-ip22/ip22-mc.c @@ -208,4 +208,30 @@ void __init sgimc_init(void) void __init prom_meminit(void) {} void __init prom_free_prom_memory(void) { +#ifdef CONFIG_SGI_IP28 + u32 mconfig1; + unsigned long flags; + spinlock_t lock; + + /* + * because ARCS accesses memory uncached we wait until ARCS + * isn't needed any longer, before we switch from slow to + * normal mode + */ + spin_lock_irqsave(&lock, flags); + mconfig1 = sgimc->mconfig1; + /* map ECC register */ + sgimc->mconfig1 = (mconfig1 & 0xffff0000) | 0x2060; + iob(); + /* switch to normal mode */ + *(unsigned long *)PHYS_TO_XKSEG_UNCACHED(0x60000000) = 0; + iob(); + /* reduce WR_COL */ + sgimc->cmacc = (sgimc->cmacc & ~0xf) | 4; + iob(); + /* restore old config */ + sgimc->mconfig1 = mconfig1; + iob(); + spin_unlock_irqrestore(&lock, flags); +#endif } diff --git a/include/asm-mips/barrier.h b/include/asm-mips/barrier.h index 9d8cfbb5e796..8e9ac313ca3b 100644 --- a/include/asm-mips/barrier.h +++ b/include/asm-mips/barrier.h @@ -92,11 +92,25 @@ #define fast_wmb() __sync() #define fast_rmb() __sync() #define fast_mb() __sync() +#ifdef CONFIG_SGI_IP28 +#define fast_iob() \ + __asm__ __volatile__( \ + ".set push\n\t" \ + ".set noreorder\n\t" \ + "lw $0,%0\n\t" \ + "sync\n\t" \ + "lw $0,%0\n\t" \ + ".set pop" \ + : /* no output */ \ + : "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \ + : "memory") +#else #define fast_iob() \ do { \ __sync(); \ __fast_iob(); \ } while (0) +#endif #ifdef CONFIG_CPU_HAS_WB -- cgit v1.2.3 From 8fa9cc16f820915fbe8ab6047c420703a87c307e Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Sat, 5 Jul 2008 01:12:13 +0200 Subject: [MIPS] IP32: Add platform devices for audio and volume button Create platform devices for audio and volume button driver. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-platform.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c index 89a71f49b692..2ee401ba0b25 100644 --- a/arch/mips/sgi-ip32/ip32-platform.c +++ b/arch/mips/sgi-ip32/ip32-platform.c @@ -65,6 +65,42 @@ static __init int meth_devinit(void) device_initcall(meth_devinit); +static __init int sgio2audio_devinit(void) +{ + struct platform_device *pd; + int ret; + + pd = platform_device_alloc("sgio2audio", -1); + if (!pd) + return -ENOMEM; + + ret = platform_device_add(pd); + if (ret) + platform_device_put(pd); + + return ret; +} + +device_initcall(sgio2audio_devinit); + +static __init int sgio2btns_devinit(void) +{ + struct platform_device *pd; + int ret; + + pd = platform_device_alloc("sgio2btns", -1); + if (!pd) + return -ENOMEM; + + ret = platform_device_add(pd); + if (ret) + platform_device_put(pd); + + return ret; +} + +device_initcall(sgio2btns_devinit); + MODULE_AUTHOR("Ralf Baechle "); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2"); -- cgit v1.2.3 From af3e69cfc9644c742a22647a5091779b9dfb9653 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 4 Jul 2008 00:59:40 +0900 Subject: [MIPS] Declare some pci variables in header file Declare pci_probe_only, etc. in asm-mips/pci.h file. This will fix some sparse warnings. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/pci/fixup-vr4133.c | 1 - arch/mips/pci/pci-bcm1480.c | 1 - arch/mips/pci/pci-ip27.c | 1 - arch/mips/pci/pci-sb1250.c | 1 - include/asm-mips/pci.h | 3 +++ 5 files changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c index de5e5f6bbf4c..34e651bd2b5e 100644 --- a/arch/mips/pci/fixup-vr4133.c +++ b/arch/mips/pci/fixup-vr4133.c @@ -171,7 +171,6 @@ void i8259_init(void) int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - extern int pci_probe_only; pci_probe_only = 1; #ifdef CONFIG_ROCKHOPPER diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c index d19d262157f2..a9060c771840 100644 --- a/arch/mips/pci/pci-bcm1480.c +++ b/arch/mips/pci/pci-bcm1480.c @@ -202,7 +202,6 @@ static int __init bcm1480_pcibios_init(void) { uint32_t cmdreg; uint64_t reg; - extern int pci_probe_only; /* CFE will assign PCI resources */ pci_probe_only = 1; diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index a18516925cdd..ce92f82b16d2 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -47,7 +47,6 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) static int num_bridges = 0; bridge_t *bridge; int slot; - extern int pci_probe_only; pci_probe_only = 1; diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index 9bc102a1380e..bf639590b8b2 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -210,7 +210,6 @@ static int __init sb1250_pcibios_init(void) void __iomem *io_map_base; uint32_t cmdreg; uint64_t reg; - extern int pci_probe_only; /* CFE will assign PCI resources */ pci_probe_only = 1; diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h index 301ff2f28012..d3be83436070 100644 --- a/include/asm-mips/pci.h +++ b/include/asm-mips/pci.h @@ -172,4 +172,7 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } +extern int pci_probe_only; +extern unsigned int pcibios_max_latency; + #endif /* _ASM_PCI_H */ -- cgit v1.2.3 From b29eee4935d9e5952a7ea8543ea499f06fb86808 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 16 Apr 2008 02:00:45 +0900 Subject: [MIPS] rbtx4927: misc cleanups * Merge tx4927_pci.h into tx4927.h * Kill (broken) external PCI clock frequency reporting * Kill unnecessary wbflush() * Kill unnecessary includes * Kill debug garbages Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/pci/fixup-rbtx4927.c | 1 - arch/mips/pci/ops-tx4927.c | 5 +- arch/mips/tx4927/common/tx4927_dbgio.c | 5 +- arch/mips/tx4927/common/tx4927_prom.c | 8 +- .../tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c | 234 +-------------- .../toshiba_rbtx4927/toshiba_rbtx4927_prom.c | 7 +- .../toshiba_rbtx4927/toshiba_rbtx4927_setup.c | 322 +-------------------- include/asm-mips/tx4927/toshiba_rbtx4927.h | 4 - include/asm-mips/tx4927/tx4927.h | 240 ++++++++++++++- include/asm-mips/tx4927/tx4927_pci.h | 268 ----------------- 10 files changed, 266 insertions(+), 828 deletions(-) delete mode 100644 include/asm-mips/tx4927/tx4927_pci.h diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c index 7450c335b387..2d234ca017db 100644 --- a/arch/mips/pci/fixup-rbtx4927.c +++ b/arch/mips/pci/fixup-rbtx4927.c @@ -38,7 +38,6 @@ #include #include -#include #undef DEBUG #ifdef DEBUG diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index 150419c8b414..1bbafeb4a774 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -40,10 +40,7 @@ #include #include #include - -#include -#include -#include +#include /* initialize in setup */ struct resource pci_io_resource = { diff --git a/arch/mips/tx4927/common/tx4927_dbgio.c b/arch/mips/tx4927/common/tx4927_dbgio.c index d8423e001b2d..ea1ff23f4b72 100644 --- a/arch/mips/tx4927/common/tx4927_dbgio.c +++ b/arch/mips/tx4927/common/tx4927_dbgio.c @@ -28,9 +28,7 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - -#include -#include +#include u8 getDebugChar(void) { @@ -38,7 +36,6 @@ u8 getDebugChar(void) return (txx9_sio_kdbg_rd()); } - int putDebugChar(u8 byte) { extern int txx9_sio_kdbg_wr( u8 ch ); diff --git a/arch/mips/tx4927/common/tx4927_prom.c b/arch/mips/tx4927/common/tx4927_prom.c index 6eed53d8f386..cc2aa9d63e82 100644 --- a/arch/mips/tx4927/common/tx4927_prom.c +++ b/arch/mips/tx4927/common/tx4927_prom.c @@ -30,12 +30,8 @@ */ #include -#include -#include -#include - -#include -#include +#include +#include #include static unsigned int __init tx4927_process_sdccr(unsigned long addr) diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c index 6d31f2a98abf..c18901a75cc4 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c @@ -28,8 +28,6 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ - - /* IRQ Device 00 RBTX4927-ISA/00 @@ -112,76 +110,14 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB */ #include -#include #include -#include -#include -#include -#include #include -#include -#include -#include -#include #include -#include -#include -#include -#include -#include -#include -#include -#include #ifdef CONFIG_TOSHIBA_FPCIB0 #include -#include #endif #include - -#undef TOSHIBA_RBTX4927_IRQ_DEBUG - -#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG -#define TOSHIBA_RBTX4927_IRQ_NONE 0x00000000 - -#define TOSHIBA_RBTX4927_IRQ_INFO ( 1 << 0 ) -#define TOSHIBA_RBTX4927_IRQ_WARN ( 1 << 1 ) -#define TOSHIBA_RBTX4927_IRQ_EROR ( 1 << 2 ) - -#define TOSHIBA_RBTX4927_IRQ_IOC_INIT ( 1 << 10 ) -#define TOSHIBA_RBTX4927_IRQ_IOC_ENABLE ( 1 << 13 ) -#define TOSHIBA_RBTX4927_IRQ_IOC_DISABLE ( 1 << 14 ) - -#define TOSHIBA_RBTX4927_SETUP_ALL 0xffffffff -#endif - - -#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG -static const u32 toshiba_rbtx4927_irq_debug_flag = - (TOSHIBA_RBTX4927_IRQ_NONE | TOSHIBA_RBTX4927_IRQ_INFO | - TOSHIBA_RBTX4927_IRQ_WARN | TOSHIBA_RBTX4927_IRQ_EROR -// | TOSHIBA_RBTX4927_IRQ_IOC_INIT -// | TOSHIBA_RBTX4927_IRQ_IOC_ENABLE -// | TOSHIBA_RBTX4927_IRQ_IOC_DISABLE - ); -#endif - - -#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG -#define TOSHIBA_RBTX4927_IRQ_DPRINTK(flag,str...) \ - if ( (toshiba_rbtx4927_irq_debug_flag) & (flag) ) \ - { \ - char tmp[100]; \ - sprintf( tmp, str ); \ - printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \ - } -#else -#define TOSHIBA_RBTX4927_IRQ_DPRINTK(flag, str...) -#endif - - - - #define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG 0 #define TOSHIBA_RBTX4927_IRQ_IOC_RAW_END 7 @@ -207,39 +143,22 @@ static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { #define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL #define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL - -u32 bit2num(u32 num) -{ - u32 i; - - for (i = 0; i < (sizeof(num) * 8); i++) { - if (num & (1 << i)) { - return (i); - } - } - return (0); -} - int toshiba_rbtx4927_irq_nested(int sw_irq) { - u32 level3; + u8 level3; level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f; if (level3) { - sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + bit2num(level3); - if (sw_irq != TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC) { - goto RETURN; - } - } + sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + fls(level3) - 1; #ifdef CONFIG_TOSHIBA_FPCIB0 - if (tx4927_using_backplane) { - int irq = i8259_irq(); - if (irq >= 0) - sw_irq = irq; - } + if (sw_irq == TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC && + tx4927_using_backplane) { + int irq = i8259_irq(); + if (irq >= 0) + sw_irq = irq; + } #endif - - RETURN: + } return (sw_irq); } @@ -250,21 +169,10 @@ static struct irqaction toshiba_rbtx4927_irq_ioc_action = { .name = TOSHIBA_RBTX4927_IOC_NAME }; - -/**********************************************************************************/ -/* Functions for ioc */ -/**********************************************************************************/ - - static void __init toshiba_rbtx4927_irq_ioc_init(void) { int i; - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_INIT, - "beg=%d end=%d\n", - TOSHIBA_RBTX4927_IRQ_IOC_BEG, - TOSHIBA_RBTX4927_IRQ_IOC_END); - for (i = TOSHIBA_RBTX4927_IRQ_IOC_BEG; i <= TOSHIBA_RBTX4927_IRQ_IOC_END; i++) set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type, @@ -276,37 +184,16 @@ static void __init toshiba_rbtx4927_irq_ioc_init(void) static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq) { - volatile unsigned char v; - - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_ENABLE, - "irq=%d\n", irq); - - if (irq < TOSHIBA_RBTX4927_IRQ_IOC_BEG - || irq > TOSHIBA_RBTX4927_IRQ_IOC_END) { - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR, - "bad irq=%d\n", irq); - panic("\n"); - } + unsigned char v; v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); v |= (1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); } - static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq) { - volatile unsigned char v; - - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_DISABLE, - "irq=%d\n", irq); - - if (irq < TOSHIBA_RBTX4927_IRQ_IOC_BEG - || irq > TOSHIBA_RBTX4927_IRQ_IOC_END) { - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR, - "bad irq=%d\n", irq); - panic("\n"); - } + unsigned char v; v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); v &= ~(1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); @@ -314,7 +201,6 @@ static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq) mmiowb(); } - void __init arch_init_irq(void) { extern void tx4927_irq_init(void); @@ -327,102 +213,4 @@ void __init arch_init_irq(void) #endif /* Onboard 10M Ether: High Active */ set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH); - - wbflush(); -} - -void toshiba_rbtx4927_irq_dump(char *key) -{ -#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG - { - u32 i, j = 0; - for (i = 0; i < NR_IRQS; i++) { - if (strcmp(irq_desc[i].chip->name, "none") - == 0) - continue; - - if ((i >= 1) - && (irq_desc[i - 1].chip->name == - irq_desc[i].chip->name)) { - j++; - } else { - j = 0; - } - TOSHIBA_RBTX4927_IRQ_DPRINTK - (TOSHIBA_RBTX4927_IRQ_INFO, - "%s irq=0x%02x/%3d s=0x%08x h=0x%08x a=0x%08x ah=0x%08x d=%1d n=%s/%02d\n", - key, i, i, irq_desc[i].status, - (u32) irq_desc[i].chip, - (u32) irq_desc[i].action, - (u32) (irq_desc[i].action ? irq_desc[i]. - action->handler : 0), - irq_desc[i].depth, - irq_desc[i].chip->name, j); - } - } -#endif -} - -void toshiba_rbtx4927_irq_dump_pics(char *s) -{ - u32 level0_m; - u32 level0_s; - u32 level1_m; - u32 level1_s; - u32 level2; - u32 level2_p; - u32 level2_s; - u32 level3_m; - u32 level3_s; - u32 level4_m; - u32 level4_s; - u32 level5_m; - u32 level5_s; - - if (s == NULL) - s = "null"; - - level0_m = (read_c0_status() & 0x0000ff00) >> 8; - level0_s = (read_c0_cause() & 0x0000ff00) >> 8; - - level1_m = level0_m; - level1_s = level0_s & 0x87; - - level2 = __raw_readl((void __iomem *)0xff1ff6a0UL); - level2_p = (((level2 & 0x10000)) ? 0 : 1); - level2_s = (((level2 & 0x1f) == 0x1f) ? 0 : (level2 & 0x1f)); - - level3_m = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB) & 0x1f; - level3_s = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f; - - level4_m = inb(0x21); - outb(0x0A, 0x20); - level4_s = inb(0x20); - - level5_m = inb(0xa1); - outb(0x0A, 0xa0); - level5_s = inb(0xa0); - - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "dump_raw_pic() "); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "cp0:m=0x%02x/s=0x%02x ", level0_m, - level0_s); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "cp0:m=0x%02x/s=0x%02x ", level1_m, - level1_s); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "pic:e=0x%02x/s=0x%02x ", level2_p, - level2_s); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "ioc:m=0x%02x/s=0x%02x ", level3_m, - level3_s); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "sbm:m=0x%02x/s=0x%02x ", level4_m, - level4_s); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, - "sbs:m=0x%02x/s=0x%02x ", level5_m, - level5_s); - TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, "[%s]\n", - s); } diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c index f3f86857beae..fdbad4bc6021 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c @@ -30,13 +30,10 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include -#include -#include -#include - -#include +#include #include #include +#include #include void __init prom_init_cmdline(void) diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c index 2203c77b2ce2..185f303c0e2a 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c @@ -62,43 +62,10 @@ #include #endif #include -#ifdef CONFIG_PCI -#include -#endif #ifdef CONFIG_SERIAL_TXX9 #include #endif -#undef TOSHIBA_RBTX4927_SETUP_DEBUG - -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG -#define TOSHIBA_RBTX4927_SETUP_SETUP ( 1 << 4 ) -#define TOSHIBA_RBTX4927_SETUP_PCIBIOS ( 1 << 7 ) -#define TOSHIBA_RBTX4927_SETUP_PCI1 ( 1 << 8 ) -#define TOSHIBA_RBTX4927_SETUP_PCI2 ( 1 << 9 ) - -#define TOSHIBA_RBTX4927_SETUP_ALL 0xffffffff -#endif - -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG -static const u32 toshiba_rbtx4927_setup_debug_flag = - (TOSHIBA_RBTX4927_SETUP_SETUP | - | TOSHIBA_RBTX4927_SETUP_PCIBIOS | TOSHIBA_RBTX4927_SETUP_PCI1 | - TOSHIBA_RBTX4927_SETUP_PCI2); -#endif - -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG -#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag,str...) \ - if ( (toshiba_rbtx4927_setup_debug_flag) & (flag) ) \ - { \ - char tmp[100]; \ - sprintf( tmp, str ); \ - printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \ - } -#else -#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag, str...) -#endif - /* These functions are used for rebooting or halting the machine*/ extern void toshiba_rbtx4927_restart(char *command); extern void toshiba_rbtx4927_halt(void); @@ -124,7 +91,6 @@ unsigned long mips_memory_upper; static int tx4927_ccfg_toeon = 1; static int tx4927_pcic_trdyto = 0; /* default: disabled */ unsigned long tx4927_ce_base[8]; -void tx4927_reset_pci_pcic(void); int tx4927_pci66 = 0; /* 0:auto */ #endif @@ -172,9 +138,6 @@ static int __init tx4927_pcibios_init(void) int busno = 0; /* One bus on the Toshiba */ struct pci_controller *hose = &tx4927_controller; - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS, - "-\n"); - for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) { early_read_config_dword(hose, busno, busno, pci_devfn, PCI_VENDOR_ID, &id); @@ -187,13 +150,6 @@ static int __init tx4927_pcibios_init(void) u8 v08_64; u32 v32_b0; u8 v08_e1; -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG - char *s = " sb/isa --"; -#endif - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n", - s); early_read_config_byte(hose, busno, busno, pci_devfn, 0x64, &v08_64); @@ -202,16 +158,6 @@ static int __init tx4927_pcibios_init(void) early_read_config_byte(hose, busno, busno, pci_devfn, 0xe1, &v08_e1); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0x64 = 0x%02x\n", s, v08_64); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0xb0 = 0x%02x\n", s, v32_b0); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0xe1 = 0x%02x\n", s, v08_e1); - /* serial irq control */ v08_64 = 0xd0; @@ -222,50 +168,12 @@ static int __init tx4927_pcibios_init(void) v08_e1 &= 0xf0; v08_e1 |= 0x0d; - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0x64 = 0x%02x\n", s, v08_64); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0xb0 = 0x%02x\n", s, v32_b0); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0xe1 = 0x%02x\n", s, v08_e1); - early_write_config_byte(hose, busno, busno, pci_devfn, 0x64, v08_64); early_write_config_dword(hose, busno, busno, pci_devfn, 0xb0, v32_b0); early_write_config_byte(hose, busno, busno, pci_devfn, 0xe1, v08_e1); - -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG - { - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x64, - &v08_64); - early_read_config_dword(hose, busno, busno, - pci_devfn, 0xb0, - &v32_b0); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0xe1, - &v08_e1); - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0x64 = 0x%02x\n", s, v08_64); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0xb0 = 0x%02x\n", s, v32_b0); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0xe1 = 0x%02x\n", s, v08_e1); - } -#endif - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n", - s); } if (id == 0x91301055) { @@ -274,13 +182,6 @@ static int __init tx4927_pcibios_init(void) u8 v08_41; u8 v08_43; u8 v08_5c; -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG - char *s = " sb/ide --"; -#endif - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n", - s); early_read_config_byte(hose, busno, busno, pci_devfn, 0x04, &v08_04); @@ -293,22 +194,6 @@ static int __init tx4927_pcibios_init(void) early_read_config_byte(hose, busno, busno, pci_devfn, 0x5c, &v08_5c); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0x04 = 0x%02x\n", s, v08_04); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0x09 = 0x%02x\n", s, v08_09); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0x41 = 0x%02x\n", s, v08_41); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0x43 = 0x%02x\n", s, v08_43); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s beg 0x5c = 0x%02x\n", s, v08_5c); - /* enable ide master/io */ v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO); @@ -332,22 +217,6 @@ static int __init tx4927_pcibios_init(void) */ v08_5c |= 0x01; - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0x04 = 0x%02x\n", s, v08_04); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0x09 = 0x%02x\n", s, v08_09); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0x41 = 0x%02x\n", s, v08_41); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0x43 = 0x%02x\n", s, v08_43); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s mid 0x5c = 0x%02x\n", s, v08_5c); - early_write_config_byte(hose, busno, busno, pci_devfn, 0x5c, v08_5c); early_write_config_byte(hose, busno, busno, @@ -358,54 +227,11 @@ static int __init tx4927_pcibios_init(void) pci_devfn, 0x41, v08_41); early_write_config_byte(hose, busno, busno, pci_devfn, 0x43, v08_43); - -#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG - { - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x04, - &v08_04); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x09, - &v08_09); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x41, - &v08_41); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x43, - &v08_43); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x5c, - &v08_5c); - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0x04 = 0x%02x\n", s, v08_04); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0x09 = 0x%02x\n", s, v08_09); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0x41 = 0x%02x\n", s, v08_41); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0x43 = 0x%02x\n", s, v08_43); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, - ":%s end 0x5c = 0x%02x\n", s, v08_5c); - } -#endif - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n", - s); } } register_pci_controller(&tx4927_controller); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS, - "+\n"); - return 0; } @@ -419,45 +245,13 @@ void __init tx4927_pci_setup(void) static int called = 0; extern unsigned int tx4927_get_mem_size(void); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "-\n"); - mips_memory_upper = tx4927_get_mem_size() << 20; mips_memory_upper += KSEG0; - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=mips_memory_upper\n", - mips_memory_upper); mips_pci_io_base = TX4927_PCIIO; mips_pci_io_size = TX4927_PCIIO_SIZE; mips_pci_mem_base = TX4927_PCIMEM; mips_pci_mem_size = TX4927_PCIMEM_SIZE; - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=mips_pci_io_base\n", - mips_pci_io_base); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=mips_pci_io_size\n", - mips_pci_io_size); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=mips_pci_mem_base\n", - mips_pci_mem_base); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=mips_pci_mem_size\n", - mips_pci_mem_size); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=pci_io_resource.start\n", - pci_io_resource.start); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=pci_io_resource.end\n", - pci_io_resource.end); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=pci_mem_resource.start\n", - pci_mem_resource.start); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=pci_mem_resource.end\n", - pci_mem_resource.end); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - "0x%08lx=mips_io_port_base", - mips_io_port_base); if (!called) { printk ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", @@ -521,29 +315,10 @@ void __init tx4927_pci_setup(void) } printk("Internal(%dMHz)", pciclk / 1000000); - } else { - int pciclk = 0; - int pciclk_setting = *tx4927_pci_clk_ptr; - switch (pciclk_setting & TX4927_PCI_CLK_MASK) { - case TX4927_PCI_CLK_33: - pciclk = 33333333; - break; - case TX4927_PCI_CLK_25: - pciclk = 25000000; - break; - case TX4927_PCI_CLK_66: - pciclk = 66666666; - break; - case TX4927_PCI_CLK_50: - pciclk = 50000000; - break; - } - printk("External(%dMHz)", pciclk / 1000000); - } + } else + printk("External"); printk("\n"); - - /* GB->PCI mappings */ tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4; tx4927_pcicptr->g2piogbase = mips_pci_io_base | @@ -644,12 +419,7 @@ void __init tx4927_pci_setup(void) tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, - ":pci setup complete:\n"); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "+\n"); } - #endif /* CONFIG_PCI */ static void __noreturn wait_forever(void) @@ -679,7 +449,6 @@ void toshiba_rbtx4927_restart(char *command) /* no return */ } - void toshiba_rbtx4927_halt(void) { printk(KERN_NOTICE "System Halted\n"); @@ -702,33 +471,19 @@ void __init plat_mem_setup(void) printk("CPU is %s\n", toshiba_name); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - "-\n"); - /* f/w leaves this on at startup */ - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - ":Clearing STO_ERL.\n"); clear_c0_status(ST0_ERL); /* enable caches -- HCP5 does this, pmon does not */ - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - ":Enabling TX49_CONF_IC,TX49_CONF_DC.\n"); cp0_config = read_c0_config(); cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); write_c0_config(cp0_config); set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - ":mips_io_port_base=0x%08lx\n", - mips_io_port_base); - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - ":Resource\n"); ioport_resource.end = 0xffffffff; iomem_resource.end = 0xffffffff; - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - ":ResetRoutines\n"); _machine_restart = toshiba_rbtx4927_restart; _machine_halt = toshiba_rbtx4927_halt; pm_power_off = toshiba_rbtx4927_power_off; @@ -761,23 +516,6 @@ void __init plat_mem_setup(void) * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) * */ - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1, - "ccfg is %lx, PCIDIVMODE is %x\n", - (unsigned long) tx4927_ccfgptr->ccfg, - (unsigned long) tx4927_ccfgptr->ccfg & - (mips_machtype == MACH_TOSHIBA_RBTX4937 ? - TX4937_CCFG_PCIDIVMODE_MASK : - TX4927_CCFG_PCIDIVMODE_MASK)); - - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1, - "PCI66 mode is %lx, PCI mode is %lx, pci arb is %lx\n", - (unsigned long) tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCI66, - (unsigned long) tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIMIDE, - (unsigned long) tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIXARB); - if (mips_machtype == MACH_TOSHIBA_RBTX4937) switch ((unsigned long)tx4927_ccfgptr-> ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { @@ -818,49 +556,18 @@ void __init plat_mem_setup(void) /* this is on ISA bus behind PCI bus, so need PCI up first */ #ifdef CONFIG_TOSHIBA_FPCIB0 - { - if (tx4927_using_backplane) { - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, - ":fpcibo=yes\n"); - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, - ":smsc_fdc37m81x_init()\n"); - smsc_fdc37m81x_init(0x3f0); - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, - ":smsc_fdc37m81x_config_beg()\n"); - smsc_fdc37m81x_config_beg(); - - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, - ":smsc_fdc37m81x_config_set(KBD)\n"); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, - SMSC_FDC37M81X_KBD); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, - 1); - - smsc_fdc37m81x_config_end(); - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, - ":smsc_fdc37m81x_config_end()\n"); - } else { - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, - ":fpcibo=not_found\n"); - } - } -#else - { - TOSHIBA_RBTX4927_SETUP_DPRINTK - (TOSHIBA_RBTX4927_SETUP_SETUP, ":fpcibo=no\n"); + if (tx4927_using_backplane) { + smsc_fdc37m81x_init(0x3f0); + smsc_fdc37m81x_config_beg(); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, + SMSC_FDC37M81X_KBD); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, + 1); + smsc_fdc37m81x_config_end(); } #endif - #endif /* CONFIG_PCI */ #ifdef CONFIG_SERIAL_TXX9 @@ -894,17 +601,12 @@ void __init plat_mem_setup(void) } #endif - #ifdef CONFIG_IP_PNP argptr = prom_getcmdline(); if (strstr(argptr, "ip=") == NULL) { strcat(argptr, " ip=any"); } #endif - - - TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP, - "+\n"); } void __init plat_time_init(void) diff --git a/include/asm-mips/tx4927/toshiba_rbtx4927.h b/include/asm-mips/tx4927/toshiba_rbtx4927.h index b188a659ce02..d6b32acd6b7b 100644 --- a/include/asm-mips/tx4927/toshiba_rbtx4927.h +++ b/include/asm-mips/tx4927/toshiba_rbtx4927.h @@ -28,9 +28,6 @@ #define __ASM_TX4927_TOSHIBA_RBTX4927_H #include -#ifdef CONFIG_PCI -#include -#endif #ifdef CONFIG_PCI #define TBTX4927_ISA_IO_OFFSET TX4927_PCIIO @@ -44,7 +41,6 @@ #define RBTX4927_SW_RESET_ENABLE (void __iomem *)0xbc00f002UL #define RBTX4927_SW_RESET_ENABLE_SET 0x01 - #define RBTX4927_RTL_8019_BASE (0x1c020280-TBTX4927_ISA_IO_OFFSET) #define RBTX4927_RTL_8019_IRQ (TX4927_IRQ_PIC_BEG + 5) diff --git a/include/asm-mips/tx4927/tx4927.h b/include/asm-mips/tx4927/tx4927.h index 193e80a17c12..1d4816f3266f 100644 --- a/include/asm-mips/tx4927/tx4927.h +++ b/include/asm-mips/tx4927/tx4927.h @@ -36,11 +36,245 @@ #define TX4927_IRQ_PIC_END (TXX9_IRQ_BASE + TXx9_MAX_IR - 1) -#define TX4927_IRQ_USER0 (TX4927_IRQ_CP0_BEG+0) -#define TX4927_IRQ_USER1 (TX4927_IRQ_CP0_BEG+1) +#define TX4927_IRQ_USER0 (TX4927_IRQ_CP0_BEG+0) +#define TX4927_IRQ_USER1 (TX4927_IRQ_CP0_BEG+1) #define TX4927_IRQ_NEST_PIC_ON_CP0 (TX4927_IRQ_CP0_BEG+2) -#define TX4927_IRQ_CPU_TIMER (TX4927_IRQ_CP0_BEG+7) +#define TX4927_IRQ_CPU_TIMER (TX4927_IRQ_CP0_BEG+7) #define TX4927_IRQ_NEST_EXT_ON_PIC (TX4927_IRQ_PIC_BEG+3) +#define TX4927_CCFG_TOE 0x00004000 +#define TX4927_CCFG_WR 0x00008000 +#define TX4927_CCFG_TINTDIS 0x01000000 + +#define TX4927_PCIMEM 0x08000000 +#define TX4927_PCIMEM_SIZE 0x08000000 +#define TX4927_PCIIO 0x16000000 +#define TX4927_PCIIO_SIZE 0x01000000 + +#define TX4927_SDRAMC_REG 0xff1f8000 +#define TX4927_EBUSC_REG 0xff1f9000 +#define TX4927_PCIC_REG 0xff1fd000 +#define TX4927_CCFG_REG 0xff1fe000 +#define TX4927_IRC_REG 0xff1ff600 +#define TX4927_NR_TMR 3 +#define TX4927_TMR_REG(ch) (0xff1ff000 + (ch) * 0x100) + +/* bits for ISTAT3/IMASK3/IMSTAT3 */ +#define TX4927_INT3B_PCID 0 +#define TX4927_INT3B_PCIC 1 +#define TX4927_INT3B_PCIB 2 +#define TX4927_INT3B_PCIA 3 +#define TX4927_INT3F_PCID (1 << TX4927_INT3B_PCID) +#define TX4927_INT3F_PCIC (1 << TX4927_INT3B_PCIC) +#define TX4927_INT3F_PCIB (1 << TX4927_INT3B_PCIB) +#define TX4927_INT3F_PCIA (1 << TX4927_INT3B_PCIA) + +#define TX4927_NR_IRQ_LOCAL TX4927_IRQ_PIC_BEG +#define TX4927_NR_IRQ_IRC 32 /* On-Chip IRC */ + +#define TX4927_IR_PCIC 16 +#define TX4927_IR_PCIERR 22 +#define TX4927_IR_PCIPMA 23 +#define TX4927_IRQ_IRC_PCIC (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIC) +#define TX4927_IRQ_IRC_PCIERR (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIERR) +#define TX4927_IRQ_IOC1 (TX4927_NR_IRQ_LOCAL + TX4927_NR_IRQ_IRC) +#define TX4927_IRQ_IOC_PCID (TX4927_IRQ_IOC1 + TX4927_INT3B_PCID) +#define TX4927_IRQ_IOC_PCIC (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIC) +#define TX4927_IRQ_IOC_PCIB (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIB) +#define TX4927_IRQ_IOC_PCIA (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIA) + +#ifdef _LANGUAGE_ASSEMBLY +#define _CONST64(c) c +#else +#define _CONST64(c) c##ull + +#include + +struct tx4927_sdramc_reg { + volatile unsigned long long cr[4]; + volatile unsigned long long unused0[4]; + volatile unsigned long long tr; + volatile unsigned long long unused1[2]; + volatile unsigned long long cmd; +}; + +struct tx4927_ebusc_reg { + volatile unsigned long long cr[8]; +}; + +struct tx4927_ccfg_reg { + volatile unsigned long long ccfg; + volatile unsigned long long crir; + volatile unsigned long long pcfg; + volatile unsigned long long tear; + volatile unsigned long long clkctr; + volatile unsigned long long unused0; + volatile unsigned long long garbc; + volatile unsigned long long unused1; + volatile unsigned long long unused2; + volatile unsigned long long ramp; +}; + +struct tx4927_pcic_reg { + volatile unsigned long pciid; + volatile unsigned long pcistatus; + volatile unsigned long pciccrev; + volatile unsigned long pcicfg1; + volatile unsigned long p2gm0plbase; /* +10 */ + volatile unsigned long p2gm0pubase; + volatile unsigned long p2gm1plbase; + volatile unsigned long p2gm1pubase; + volatile unsigned long p2gm2pbase; /* +20 */ + volatile unsigned long p2giopbase; + volatile unsigned long unused0; + volatile unsigned long pcisid; + volatile unsigned long unused1; /* +30 */ + volatile unsigned long pcicapptr; + volatile unsigned long unused2; + volatile unsigned long pcicfg2; + volatile unsigned long g2ptocnt; /* +40 */ + volatile unsigned long unused3[15]; + volatile unsigned long g2pstatus; /* +80 */ + volatile unsigned long g2pmask; + volatile unsigned long pcisstatus; + volatile unsigned long pcimask; + volatile unsigned long p2gcfg; /* +90 */ + volatile unsigned long p2gstatus; + volatile unsigned long p2gmask; + volatile unsigned long p2gccmd; + volatile unsigned long unused4[24]; /* +a0 */ + volatile unsigned long pbareqport; /* +100 */ + volatile unsigned long pbacfg; + volatile unsigned long pbastatus; + volatile unsigned long pbamask; + volatile unsigned long pbabm; /* +110 */ + volatile unsigned long pbacreq; + volatile unsigned long pbacgnt; + volatile unsigned long pbacstate; + volatile unsigned long long g2pmgbase[3]; /* +120 */ + volatile unsigned long long g2piogbase; + volatile unsigned long g2pmmask[3]; /* +140 */ + volatile unsigned long g2piomask; + volatile unsigned long long g2pmpbase[3]; /* +150 */ + volatile unsigned long long g2piopbase; + volatile unsigned long pciccfg; /* +170 */ + volatile unsigned long pcicstatus; + volatile unsigned long pcicmask; + volatile unsigned long unused5; + volatile unsigned long long p2gmgbase[3]; /* +180 */ + volatile unsigned long long p2giogbase; + volatile unsigned long g2pcfgadrs; /* +1a0 */ + volatile unsigned long g2pcfgdata; + volatile unsigned long unused6[8]; + volatile unsigned long g2pintack; + volatile unsigned long g2pspc; + volatile unsigned long unused7[12]; /* +1d0 */ + volatile unsigned long long pdmca; /* +200 */ + volatile unsigned long long pdmga; + volatile unsigned long long pdmpa; + volatile unsigned long long pdmcut; + volatile unsigned long long pdmcnt; /* +220 */ + volatile unsigned long long pdmsts; + volatile unsigned long long unused8[2]; + volatile unsigned long long pdmdb[4]; /* +240 */ + volatile unsigned long long pdmtdh; /* +260 */ + volatile unsigned long long pdmdms; +}; + +#endif /* _LANGUAGE_ASSEMBLY */ + +/* + * PCIC + */ + +/* bits for G2PSTATUS/G2PMASK */ +#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003 +#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002 +#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001 + +/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */ +#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900 + +/* bits for PBACFG */ +#define TX4927_PCIC_PBACFG_RPBA 0x00000004 +#define TX4927_PCIC_PBACFG_PBAEN 0x00000002 +#define TX4927_PCIC_PBACFG_BMCEN 0x00000001 + +/* bits for G2PMnGBASE */ +#define TX4927_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000) +#define TX4927_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000) + +/* bits for G2PIOGBASE */ +#define TX4927_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000) +#define TX4927_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000) + +/* bits for PCICSTATUS/PCICMASK */ +#define TX4927_PCIC_PCICSTATUS_ALL 0x000007dc + +/* bits for PCICCFG */ +#define TX4927_PCIC_PCICCFG_LBWC_MASK 0x0fff0000 +#define TX4927_PCIC_PCICCFG_HRST 0x00000800 +#define TX4927_PCIC_PCICCFG_SRST 0x00000400 +#define TX4927_PCIC_PCICCFG_IRBER 0x00000200 +#define TX4927_PCIC_PCICCFG_IMSE0 0x00000100 +#define TX4927_PCIC_PCICCFG_IMSE1 0x00000080 +#define TX4927_PCIC_PCICCFG_IMSE2 0x00000040 +#define TX4927_PCIC_PCICCFG_IISE 0x00000020 +#define TX4927_PCIC_PCICCFG_ATR 0x00000010 +#define TX4927_PCIC_PCICCFG_ICAE 0x00000008 + +/* bits for P2GMnGBASE */ +#define TX4927_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000) +#define TX4927_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000) +#define TX4927_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000) + +/* bits for P2GIOGBASE */ +#define TX4927_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000) +#define TX4927_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000) +#define TX4927_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000) + +#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) +#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32) + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX4927_CCFG_PCI66 0x00800000 +#define TX4927_CCFG_PCIMIDE 0x00400000 +#define TX4927_CCFG_PCIXARB 0x00002000 +#define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800 +#define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000 +#define TX4927_CCFG_PCIDIVMODE_3 0x00000800 +#define TX4927_CCFG_PCIDIVMODE_5 0x00001000 +#define TX4927_CCFG_PCIDIVMODE_6 0x00001800 + +#define TX4937_CCFG_PCIDIVMODE_MASK 0x00001c00 +#define TX4937_CCFG_PCIDIVMODE_8 0x00000000 +#define TX4937_CCFG_PCIDIVMODE_4 0x00000400 +#define TX4937_CCFG_PCIDIVMODE_9 0x00000800 +#define TX4937_CCFG_PCIDIVMODE_4_5 0x00000c00 +#define TX4937_CCFG_PCIDIVMODE_10 0x00001000 +#define TX4937_CCFG_PCIDIVMODE_5 0x00001400 +#define TX4937_CCFG_PCIDIVMODE_11 0x00001800 +#define TX4937_CCFG_PCIDIVMODE_5_5 0x00001c00 + +/* PCFG : Pin Configuration */ +#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000 +#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) + +/* CLKCTR : Clock Control */ +#define TX4927_CLKCTR_PCICKD 0x00400000 +#define TX4927_CLKCTR_PCIRST 0x00000040 + +#ifndef _LANGUAGE_ASSEMBLY + +#define tx4927_sdramcptr ((struct tx4927_sdramc_reg *)TX4927_SDRAMC_REG) +#define tx4927_pcicptr ((struct tx4927_pcic_reg *)TX4927_PCIC_REG) +#define tx4927_ccfgptr ((struct tx4927_ccfg_reg *)TX4927_CCFG_REG) +#define tx4927_ebuscptr ((struct tx4927_ebusc_reg *)TX4927_EBUSC_REG) + +#endif /* _LANGUAGE_ASSEMBLY */ + #endif /* __ASM_TX4927_TX4927_H */ diff --git a/include/asm-mips/tx4927/tx4927_pci.h b/include/asm-mips/tx4927/tx4927_pci.h deleted file mode 100644 index 0be77df70f2b..000000000000 --- a/include/asm-mips/tx4927/tx4927_pci.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000-2001 Toshiba Corporation - */ -#ifndef __ASM_TX4927_TX4927_PCI_H -#define __ASM_TX4927_TX4927_PCI_H - -#define TX4927_CCFG_TOE 0x00004000 -#define TX4927_CCFG_WR 0x00008000 -#define TX4927_CCFG_TINTDIS 0x01000000 - -#define TX4927_PCIMEM 0x08000000 -#define TX4927_PCIMEM_SIZE 0x08000000 -#define TX4927_PCIIO 0x16000000 -#define TX4927_PCIIO_SIZE 0x01000000 - -#define TX4927_SDRAMC_REG 0xff1f8000 -#define TX4927_EBUSC_REG 0xff1f9000 -#define TX4927_PCIC_REG 0xff1fd000 -#define TX4927_CCFG_REG 0xff1fe000 -#define TX4927_IRC_REG 0xff1ff600 -#define TX4927_NR_TMR 3 -#define TX4927_TMR_REG(ch) (0xff1ff000 + (ch) * 0x100) -#define TX4927_CE3 0x17f00000 /* 1M */ -#define TX4927_PCIRESET_ADDR 0xbc00f006 -#define TX4927_PCI_CLK_ADDR (KSEG1 + TX4927_CE3 + 0x00040020) - -#define TX4927_IMSTAT_ADDR(n) (KSEG1 + TX4927_CE3 + 0x0004001a + (n)) -#define tx4927_imstat_ptr(n) \ - ((volatile unsigned char *)TX4927_IMSTAT_ADDR(n)) - -/* bits for ISTAT3/IMASK3/IMSTAT3 */ -#define TX4927_INT3B_PCID 0 -#define TX4927_INT3B_PCIC 1 -#define TX4927_INT3B_PCIB 2 -#define TX4927_INT3B_PCIA 3 -#define TX4927_INT3F_PCID (1 << TX4927_INT3B_PCID) -#define TX4927_INT3F_PCIC (1 << TX4927_INT3B_PCIC) -#define TX4927_INT3F_PCIB (1 << TX4927_INT3B_PCIB) -#define TX4927_INT3F_PCIA (1 << TX4927_INT3B_PCIA) - -/* bits for PCI_CLK (S6) */ -#define TX4927_PCI_CLK_HOST 0x80 -#define TX4927_PCI_CLK_MASK (0x0f << 3) -#define TX4927_PCI_CLK_33 (0x01 << 3) -#define TX4927_PCI_CLK_25 (0x04 << 3) -#define TX4927_PCI_CLK_66 (0x09 << 3) -#define TX4927_PCI_CLK_50 (0x0c << 3) -#define TX4927_PCI_CLK_ACK 0x04 -#define TX4927_PCI_CLK_ACE 0x02 -#define TX4927_PCI_CLK_ENDIAN 0x01 -#define TX4927_NR_IRQ_LOCAL TX4927_IRQ_PIC_BEG -#define TX4927_NR_IRQ_IRC 32 /* On-Chip IRC */ - -#define TX4927_IR_PCIC 16 -#define TX4927_IR_PCIERR 22 -#define TX4927_IR_PCIPMA 23 -#define TX4927_IRQ_IRC_PCIC (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIC) -#define TX4927_IRQ_IRC_PCIERR (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIERR) -#define TX4927_IRQ_IOC1 (TX4927_NR_IRQ_LOCAL + TX4927_NR_IRQ_IRC) -#define TX4927_IRQ_IOC_PCID (TX4927_IRQ_IOC1 + TX4927_INT3B_PCID) -#define TX4927_IRQ_IOC_PCIC (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIC) -#define TX4927_IRQ_IOC_PCIB (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIB) -#define TX4927_IRQ_IOC_PCIA (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIA) - -#ifdef _LANGUAGE_ASSEMBLY -#define _CONST64(c) c -#else -#define _CONST64(c) c##ull - -#include - -#define tx4927_pcireset_ptr \ - ((volatile unsigned char *)TX4927_PCIRESET_ADDR) -#define tx4927_pci_clk_ptr \ - ((volatile unsigned char *)TX4927_PCI_CLK_ADDR) - -struct tx4927_sdramc_reg { - volatile unsigned long long cr[4]; - volatile unsigned long long unused0[4]; - volatile unsigned long long tr; - volatile unsigned long long unused1[2]; - volatile unsigned long long cmd; -}; - -struct tx4927_ebusc_reg { - volatile unsigned long long cr[8]; -}; - -struct tx4927_ccfg_reg { - volatile unsigned long long ccfg; - volatile unsigned long long crir; - volatile unsigned long long pcfg; - volatile unsigned long long tear; - volatile unsigned long long clkctr; - volatile unsigned long long unused0; - volatile unsigned long long garbc; - volatile unsigned long long unused1; - volatile unsigned long long unused2; - volatile unsigned long long ramp; -}; - -struct tx4927_pcic_reg { - volatile unsigned long pciid; - volatile unsigned long pcistatus; - volatile unsigned long pciccrev; - volatile unsigned long pcicfg1; - volatile unsigned long p2gm0plbase; /* +10 */ - volatile unsigned long p2gm0pubase; - volatile unsigned long p2gm1plbase; - volatile unsigned long p2gm1pubase; - volatile unsigned long p2gm2pbase; /* +20 */ - volatile unsigned long p2giopbase; - volatile unsigned long unused0; - volatile unsigned long pcisid; - volatile unsigned long unused1; /* +30 */ - volatile unsigned long pcicapptr; - volatile unsigned long unused2; - volatile unsigned long pcicfg2; - volatile unsigned long g2ptocnt; /* +40 */ - volatile unsigned long unused3[15]; - volatile unsigned long g2pstatus; /* +80 */ - volatile unsigned long g2pmask; - volatile unsigned long pcisstatus; - volatile unsigned long pcimask; - volatile unsigned long p2gcfg; /* +90 */ - volatile unsigned long p2gstatus; - volatile unsigned long p2gmask; - volatile unsigned long p2gccmd; - volatile unsigned long unused4[24]; /* +a0 */ - volatile unsigned long pbareqport; /* +100 */ - volatile unsigned long pbacfg; - volatile unsigned long pbastatus; - volatile unsigned long pbamask; - volatile unsigned long pbabm; /* +110 */ - volatile unsigned long pbacreq; - volatile unsigned long pbacgnt; - volatile unsigned long pbacstate; - volatile unsigned long long g2pmgbase[3]; /* +120 */ - volatile unsigned long long g2piogbase; - volatile unsigned long g2pmmask[3]; /* +140 */ - volatile unsigned long g2piomask; - volatile unsigned long long g2pmpbase[3]; /* +150 */ - volatile unsigned long long g2piopbase; - volatile unsigned long pciccfg; /* +170 */ - volatile unsigned long pcicstatus; - volatile unsigned long pcicmask; - volatile unsigned long unused5; - volatile unsigned long long p2gmgbase[3]; /* +180 */ - volatile unsigned long long p2giogbase; - volatile unsigned long g2pcfgadrs; /* +1a0 */ - volatile unsigned long g2pcfgdata; - volatile unsigned long unused6[8]; - volatile unsigned long g2pintack; - volatile unsigned long g2pspc; - volatile unsigned long unused7[12]; /* +1d0 */ - volatile unsigned long long pdmca; /* +200 */ - volatile unsigned long long pdmga; - volatile unsigned long long pdmpa; - volatile unsigned long long pdmcut; - volatile unsigned long long pdmcnt; /* +220 */ - volatile unsigned long long pdmsts; - volatile unsigned long long unused8[2]; - volatile unsigned long long pdmdb[4]; /* +240 */ - volatile unsigned long long pdmtdh; /* +260 */ - volatile unsigned long long pdmdms; -}; - -#endif /* _LANGUAGE_ASSEMBLY */ - -/* - * PCIC - */ - -/* bits for G2PSTATUS/G2PMASK */ -#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003 -#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002 -#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001 - -/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */ -#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900 - -/* bits for PBACFG */ -#define TX4927_PCIC_PBACFG_RPBA 0x00000004 -#define TX4927_PCIC_PBACFG_PBAEN 0x00000002 -#define TX4927_PCIC_PBACFG_BMCEN 0x00000001 - -/* bits for G2PMnGBASE */ -#define TX4927_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for G2PIOGBASE */ -#define TX4927_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for PCICSTATUS/PCICMASK */ -#define TX4927_PCIC_PCICSTATUS_ALL 0x000007dc - -/* bits for PCICCFG */ -#define TX4927_PCIC_PCICCFG_LBWC_MASK 0x0fff0000 -#define TX4927_PCIC_PCICCFG_HRST 0x00000800 -#define TX4927_PCIC_PCICCFG_SRST 0x00000400 -#define TX4927_PCIC_PCICCFG_IRBER 0x00000200 -#define TX4927_PCIC_PCICCFG_IMSE0 0x00000100 -#define TX4927_PCIC_PCICCFG_IMSE1 0x00000080 -#define TX4927_PCIC_PCICCFG_IMSE2 0x00000040 -#define TX4927_PCIC_PCICCFG_IISE 0x00000020 -#define TX4927_PCIC_PCICCFG_ATR 0x00000010 -#define TX4927_PCIC_PCICCFG_ICAE 0x00000008 - -/* bits for P2GMnGBASE */ -#define TX4927_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000) -#define TX4927_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000) - -/* bits for P2GIOGBASE */ -#define TX4927_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000) -#define TX4927_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000) - -#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) -#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32) - -/* - * CCFG - */ -/* CCFG : Chip Configuration */ -#define TX4927_CCFG_PCI66 0x00800000 -#define TX4927_CCFG_PCIMIDE 0x00400000 -#define TX4927_CCFG_PCIXARB 0x00002000 -#define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800 -#define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000 -#define TX4927_CCFG_PCIDIVMODE_3 0x00000800 -#define TX4927_CCFG_PCIDIVMODE_5 0x00001000 -#define TX4927_CCFG_PCIDIVMODE_6 0x00001800 - -#define TX4937_CCFG_PCIDIVMODE_MASK 0x00001c00 -#define TX4937_CCFG_PCIDIVMODE_8 0x00000000 -#define TX4937_CCFG_PCIDIVMODE_4 0x00000400 -#define TX4937_CCFG_PCIDIVMODE_9 0x00000800 -#define TX4937_CCFG_PCIDIVMODE_4_5 0x00000c00 -#define TX4937_CCFG_PCIDIVMODE_10 0x00001000 -#define TX4937_CCFG_PCIDIVMODE_5 0x00001400 -#define TX4937_CCFG_PCIDIVMODE_11 0x00001800 -#define TX4937_CCFG_PCIDIVMODE_5_5 0x00001c00 - -/* PCFG : Pin Configuration */ -#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000 -#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) - -/* CLKCTR : Clock Control */ -#define TX4927_CLKCTR_PCICKD 0x00400000 -#define TX4927_CLKCTR_PCIRST 0x00000040 - - -#ifndef _LANGUAGE_ASSEMBLY - -#define tx4927_sdramcptr ((struct tx4927_sdramc_reg *)TX4927_SDRAMC_REG) -#define tx4927_pcicptr ((struct tx4927_pcic_reg *)TX4927_PCIC_REG) -#define tx4927_ccfgptr ((struct tx4927_ccfg_reg *)TX4927_CCFG_REG) -#define tx4927_ebuscptr ((struct tx4927_ebusc_reg *)TX4927_EBUSC_REG) - -#endif /* _LANGUAGE_ASSEMBLY */ - -#endif /* __ASM_TX4927_TX4927_PCI_H */ -- cgit v1.2.3 From b012cffe7f6971e9ba5afca034a3d80e1cf1435c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:33 +0100 Subject: [MIPS] Replace use of print_symbol with new %sP pointer format. Signed-off-by: Ralf Baechle --- arch/mips/kernel/mips-mt.c | 11 +++++------ arch/mips/kernel/traps.c | 8 ++++---- arch/mips/sgi-ip27/ip27-nmi.c | 10 +++------- 3 files changed, 12 insertions(+), 17 deletions(-) diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c index 640fb0cc6e39..d01665a453f5 100644 --- a/arch/mips/kernel/mips-mt.c +++ b/arch/mips/kernel/mips-mt.c @@ -4,7 +4,6 @@ */ #include -#include #include #include #include @@ -84,9 +83,9 @@ void mips_mt_regdump(unsigned long mvpctl) read_vpe_c0_vpeconf0()); printk(" VPE%d.Status : %08lx\n", i, read_vpe_c0_status()); - printk(" VPE%d.EPC : %08lx ", - i, read_vpe_c0_epc()); - print_symbol("%s\n", read_vpe_c0_epc()); + printk(" VPE%d.EPC : %08lx %pS\n", + i, read_vpe_c0_epc(), + (void *) read_vpe_c0_epc()); printk(" VPE%d.Cause : %08lx\n", i, read_vpe_c0_cause()); printk(" VPE%d.Config7 : %08lx\n", @@ -111,8 +110,8 @@ void mips_mt_regdump(unsigned long mvpctl) } printk(" TCStatus : %08lx\n", tcstatval); printk(" TCBind : %08lx\n", read_tc_c0_tcbind()); - printk(" TCRestart : %08lx ", read_tc_c0_tcrestart()); - print_symbol("%s\n", read_tc_c0_tcrestart()); + printk(" TCRestart : %08lx %pS\n", + read_tc_c0_tcrestart(), (void *) read_tc_c0_tcrestart()); printk(" TCHalt : %08lx\n", haltval); printk(" TCContext : %08lx\n", read_tc_c0_tccontext()); if (!haltval) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 6e7e4a2775f6..b8ea4e9d0d87 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -248,11 +248,11 @@ static void __show_regs(const struct pt_regs *regs) /* * Saved cp0 registers */ - printk("epc : %0*lx ", field, regs->cp0_epc); - print_symbol("%s ", regs->cp0_epc); + printk("epc : %0*lx %pS\n", field, regs->cp0_epc, + (void *) regs->cp0_epc); printk(" %s\n", print_tainted()); - printk("ra : %0*lx ", field, regs->regs[31]); - print_symbol("%s\n", regs->regs[31]); + printk("ra : %0*lx %pS\n", field, regs->regs[31], + (void *) regs->regs[31]); printk("Status: %08x ", (uint32_t) regs->cp0_status); diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c index b0a25e1ee8b7..64459e7d891b 100644 --- a/arch/mips/sgi-ip27/ip27-nmi.c +++ b/arch/mips/sgi-ip27/ip27-nmi.c @@ -1,4 +1,3 @@ -#include #include #include #include @@ -84,13 +83,10 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice) /* * Saved cp0 registers */ - printk("epc : %016lx ", nr->epc); - print_symbol("%s ", nr->epc); + printk("epc : %016lx %pS\n", nr->epc, (void *) nr->epc); printk("%s\n", print_tainted()); - printk("ErrEPC: %016lx ", nr->error_epc); - print_symbol("%s\n", nr->error_epc); - printk("ra : %016lx ", nr->gpr[31]); - print_symbol("%s\n", nr->gpr[31]); + printk("ErrEPC: %016lx %pS\n", nr->error_epc, (void *) nr->error_epc); + printk("ra : %016lx %pS\n", nr->gpr[31], (void *) nr->gpr[31]); printk("Status: %08lx ", nr->sr); if (nr->sr & ST0_KX) -- cgit v1.2.3 From 74c8494eeb7b321e5922ee43120f91c7c9b7317f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:33 +0100 Subject: [MIPS] Bigsur: Make defconfig a bit more useful. Signed-off-by: Ralf Baechle --- arch/mips/configs/bigsur_defconfig | 162 ++++++++++++++++++++++++------------- 1 file changed, 104 insertions(+), 58 deletions(-) diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 3b42cea2e402..2b4ad5f3e959 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 08:11:19 2008 +# Linux kernel version: 2.6.26-rc8 +# Wed Jul 2 17:02:55 2008 # CONFIG_MIPS=y @@ -148,6 +148,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=0 @@ -156,6 +157,7 @@ CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS_DEFAULT_4=y CONFIG_NR_CPUS=4 +# CONFIG_MIPS_CMP is not set CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -223,6 +225,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y @@ -241,12 +244,14 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y @@ -302,7 +307,6 @@ CONFIG_BINFMT_ELF32=y # Power management options # CONFIG_PM=y -# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # @@ -399,9 +403,11 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y +# CONFIG_IPV6_MROUTE is not set CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -600,7 +606,7 @@ CONFIG_BLK_DEV_IT8213=m CONFIG_BLK_DEV_TC86C001=m # CONFIG_BLK_DEV_IDE_SWARM is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -617,11 +623,12 @@ CONFIG_SCSI_PROC_FS=y # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set +CONFIG_CHR_DEV_ST=m # CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs @@ -650,6 +657,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set @@ -675,7 +683,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +CONFIG_SATA_SIL24=y +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -685,7 +696,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -CONFIG_SATA_SIL24=y # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -730,12 +740,17 @@ CONFIG_PATA_SIL680=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -797,7 +812,6 @@ CONFIG_SB1250_MAC=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -815,6 +829,7 @@ CONFIG_NETXEN_NIC=m # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -822,6 +837,7 @@ CONFIG_NETXEN_NIC=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -867,6 +883,7 @@ CONFIG_SERIO_RAW=m # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set @@ -903,7 +920,6 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -913,13 +929,6 @@ CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - # # I2C Hardware Bus support # @@ -946,6 +955,7 @@ CONFIG_I2C_SIBYTE=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -955,23 +965,18 @@ CONFIG_SENSORS_EEPROM=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set CONFIG_SENSORS_PCF8591=y -# CONFIG_TPS65010 is not set CONFIG_SENSORS_MAX6875=y # CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y CONFIG_I2C_DEBUG_CHIP=y - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -984,12 +989,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -1015,6 +1030,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1023,13 +1040,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1123,7 +1137,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1194,6 +1207,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1204,6 +1218,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1217,6 +1232,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1237,53 +1253,82 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CTR=m +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=y + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_XTS=m -CONFIG_CRYPTO_CTR=m -CONFIG_CRYPTO_GCM=m -CONFIG_CRYPTO_CCM=m -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -# CONFIG_CRYPTO_CRC32C is not set -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set -CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1292,9 +1337,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m -- cgit v1.2.3 From 372a775f50347f5c1dd87752b16e5c05ea965790 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:33 +0100 Subject: [MIPS] Enable -ffunction-sections sections. -ffunction-sections serves as a workaround for the problems caused by the limited branch range in some inline assembler fragments for very large compilation units. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index ad36c946ff96..0b8d82d55c66 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -14,7 +14,7 @@ KBUILD_DEFCONFIG := ip22_defconfig -cflags-y := +cflags-y := -ffunction-sections # # Select the object file format to substitute into the linker script. -- cgit v1.2.3 From 2157bc68711bf0e69f9aca4d310bd863298fbb3f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:33 +0100 Subject: [MIPS] Atlas: Remove support code. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 32 - arch/mips/Makefile | 9 - arch/mips/configs/atlas_defconfig | 1472 ---------------------------- arch/mips/configs/bcm47xx_defconfig | 1 - arch/mips/configs/bigsur_defconfig | 1 - arch/mips/configs/capcella_defconfig | 1 - arch/mips/configs/cobalt_defconfig | 1 - arch/mips/configs/db1000_defconfig | 1 - arch/mips/configs/db1100_defconfig | 1 - arch/mips/configs/db1200_defconfig | 1 - arch/mips/configs/db1500_defconfig | 1 - arch/mips/configs/db1550_defconfig | 1 - arch/mips/configs/decstation_defconfig | 1 - arch/mips/configs/e55_defconfig | 1 - arch/mips/configs/emma2rh_defconfig | 1 - arch/mips/configs/excite_defconfig | 1 - arch/mips/configs/fulong_defconfig | 1 - arch/mips/configs/ip22_defconfig | 1 - arch/mips/configs/ip27_defconfig | 1 - arch/mips/configs/ip28_defconfig | 1 - arch/mips/configs/ip32_defconfig | 1 - arch/mips/configs/jazz_defconfig | 1 - arch/mips/configs/jmr3927_defconfig | 1 - arch/mips/configs/lasat_defconfig | 1 - arch/mips/configs/malta_defconfig | 1 - arch/mips/configs/mipssim_defconfig | 1 - arch/mips/configs/mpc30x_defconfig | 1 - arch/mips/configs/msp71xx_defconfig | 1 - arch/mips/configs/mtx1_defconfig | 1 - arch/mips/configs/pb1100_defconfig | 1 - arch/mips/configs/pb1500_defconfig | 1 - arch/mips/configs/pb1550_defconfig | 1 - arch/mips/configs/pnx8550-jbs_defconfig | 1 - arch/mips/configs/pnx8550-stb810_defconfig | 1 - arch/mips/configs/rbhma4200_defconfig | 1 - arch/mips/configs/rbhma4500_defconfig | 1 - arch/mips/configs/rm200_defconfig | 1 - arch/mips/configs/sb1250-swarm_defconfig | 1 - arch/mips/configs/sead_defconfig | 1 - arch/mips/configs/tb0219_defconfig | 1 - arch/mips/configs/tb0226_defconfig | 1 - arch/mips/configs/tb0287_defconfig | 1 - arch/mips/configs/workpad_defconfig | 1 - arch/mips/configs/wrppmc_defconfig | 1 - arch/mips/configs/yosemite_defconfig | 1 - arch/mips/mips-boards/atlas/Makefile | 22 - arch/mips/mips-boards/atlas/atlas_gdb.c | 97 -- arch/mips/mips-boards/atlas/atlas_int.c | 272 ----- arch/mips/mips-boards/atlas/atlas_setup.c | 82 -- arch/mips/mips-boards/generic/console.c | 11 +- arch/mips/mips-boards/generic/init.c | 8 - arch/mips/mips-boards/generic/reset.c | 17 - arch/mips/mips-boards/generic/time.c | 5 +- arch/mips/pci/Makefile | 1 - arch/mips/pci/fixup-atlas.c | 91 -- include/asm-mips/mach-atlas/mc146818rtc.h | 60 -- 56 files changed, 2 insertions(+), 2219 deletions(-) delete mode 100644 arch/mips/configs/atlas_defconfig delete mode 100644 arch/mips/mips-boards/atlas/Makefile delete mode 100644 arch/mips/mips-boards/atlas/atlas_gdb.c delete mode 100644 arch/mips/mips-boards/atlas/atlas_int.c delete mode 100644 arch/mips/mips-boards/atlas/atlas_setup.c delete mode 100644 arch/mips/pci/fixup-atlas.c delete mode 100644 include/asm-mips/mach-atlas/mc146818rtc.h diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 21d6ec1e5368..6383c700686c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -181,38 +181,6 @@ config LEMOTE_FULONG Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and an FPGA northbridge -config MIPS_ATLAS - bool "MIPS Atlas board" - select BOOT_ELF32 - select BOOT_RAW - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select SYS_HAS_EARLY_PRINTK - select IRQ_CPU - select HW_HAS_PCI - select MIPS_BOARDS_GEN - select MIPS_BONITO64 - select PCI_GT64XXX_PCI0 - select MIPS_MSC - select RM7000_CPU_SCACHE - select SWAP_IO_SPACE - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_HAS_CPU_MIPS64_R1 - select SYS_HAS_CPU_NEVADA - select SYS_HAS_CPU_RM7000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL - select SYS_SUPPORTS_SMARTMIPS - select GENERIC_HARDIRQS_NO__DO_IRQ - help - This enables support for the MIPS Technologies Atlas evaluation - board. - config MIPS_MALTA bool "MIPS Malta board" select ARCH_MAY_HAVE_PC_FDC diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 0b8d82d55c66..9bc2c763909f 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -309,15 +309,6 @@ cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote # core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/ -# -# MIPS Atlas board -# -core-$(CONFIG_MIPS_ATLAS) += arch/mips/mips-boards/atlas/ -cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-atlas -cflags-$(CONFIG_MIPS_ATLAS) += -Iinclude/asm-mips/mach-mips -load-$(CONFIG_MIPS_ATLAS) += 0xffffffff80100000 -all-$(CONFIG_MIPS_ATLAS) := vmlinux.bin - # # MIPS Malta board # diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig deleted file mode 100644 index 3443f6cd57bb..000000000000 --- a/arch/mips/configs/atlas_defconfig +++ /dev/null @@ -1,1472 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Sun Feb 18 21:27:35 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -CONFIG_MIPS_ATLAS=y -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_MIPS_BONITO64=y -CONFIG_MIPS_MSC=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_MIPS_BOARDS_GEN=y -CONFIG_MIPS_GT64120=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_BOOT_ELF32=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_CPU_MIPS64_R1=y -CONFIG_SYS_HAS_CPU_NEVADA=y -CONFIG_SYS_HAS_CPU_RM7000=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPSR1=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_BOARD_SCACHE=y -CONFIG_RM7000_CPU_SCACHE=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_SYS_SUPPORTS_MULTITHREADING=y -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y -# CONFIG_CPU_HAS_SMARTMIPS is not set -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_SYS_SUPPORTS_SMARTMIPS=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -CONFIG_HZ_100=y -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=100 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -CONFIG_IP_VS=m -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IPV6=m -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=y -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_MULTIPLE_TABLES=y -CONFIG_IPV6_SUBTREES=y -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_GRE=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_NF_NAT_SIP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -# CONFIG_IP_NF_TARGET_CLUSTERIP is not set -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_RAW=m - -# -# Bridge: Netfilter Configuration -# -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_ULOG=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_FIFO=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_INGRESS=m - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -# CONFIG_CLS_U32_MARK is not set -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -CONFIG_NET_CLS_POLICE=y -CONFIG_NET_CLS_IND=y -CONFIG_NET_ESTIMATOR=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y -CONFIG_FIB_RULES=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -CONFIG_BLK_DEV_UMEM=m -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=y -CONFIG_SCSI_TGT=m -CONFIG_SCSI_NETLINK=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=m -CONFIG_SCSI_SAS_LIBSAS=m -CONFIG_SCSI_SAS_LIBSAS_DEBUG=y - -# -# SCSI low-level drivers -# -CONFIG_ISCSI_TCP=m -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -CONFIG_SCSI_SYM53C8XX_MMIO=y -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_EMC=m - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -# CONFIG_PCNET32_NAPI is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -CONFIG_LAN_SAA9730=y -# CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -CONFIG_MOUSE_SERIAL=m -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_RAW=y -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -CONFIG_REISERFS_PROC_INFO=y -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_SECURITY=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=m -CONFIG_ROMFS_FS=m -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_QUOTA=y -# CONFIG_QFMT_V1 is not set -CONFIG_QFMT_V2=y -CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=m -CONFIG_VXFS_FS=m -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=y -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -# CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=m -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig index c0e42e74dfbd..10d83e4aca58 100644 --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -16,7 +16,6 @@ CONFIG_BCM47XX=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 2b4ad5f3e959..a9926861f14c 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index a94f14b5c8fa..ee8a7fc99f54 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index b7295e988381..ce31a47f1a15 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS_COBALT=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 36578968d386..f99b6f8c9788 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 5a90740c363a..0d6ba9e65ff5 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index 76f37a1159fe..0c6f2a469f09 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_DB1200=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 508c91944f30..02db28f5dc03 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 0c2c70d21db9..a0f19f2e7d59 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_DB1550=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 58c2cd68c3a7..c1ab8a21bb07 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set CONFIG_MACH_DECSTATION=y # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 90d81f5dcebc..88c2420bc627 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig index f9a003c2b3a1..03f0baad1b67 100644 --- a/arch/mips/configs/emma2rh_defconfig +++ b/arch/mips/configs/emma2rh_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 15efacc75d73..873597a4aaf1 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -27,7 +27,6 @@ CONFIG_BASLER_EXCITE=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig index 5887a1735fba..13e1ef2240ea 100644 --- a/arch/mips/configs/fulong_defconfig +++ b/arch/mips/configs/fulong_defconfig @@ -14,7 +14,6 @@ CONFIG_LEMOTE_FULONG=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 4f5e56c9335e..7daf203c1481 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -15,7 +15,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index f40e437bd9e5..83d769f941d6 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig index ec188be9a67a..3c5090a248b7 100644 --- a/arch/mips/configs/ip28_defconfig +++ b/arch/mips/configs/ip28_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index 2c5c624c5d42..f8d1cf3e8749 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index 56148745e8f2..72ff710c878f 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set CONFIG_MACH_JAZZ=y -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index a7cd67753aac..8dc8bef471b4 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig index e6aef999854c..a8fa2055c071 100644 --- a/arch/mips/configs/lasat_defconfig +++ b/arch/mips/configs/lasat_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set CONFIG_LASAT=y # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 3d0da952811c..9a8ed74cc1a9 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -15,7 +15,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set CONFIG_MIPS_MALTA=y # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index 4f6bce99d5cf..1d205446ee70 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set CONFIG_MIPS_SIM=y diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 27e23fc9363a..0c7f35acb702 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index b12b73f6d74f..2dd2a4f38fbe 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index fa3aa3919448..17d66526fa48 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -14,7 +14,6 @@ CONFIG_MACH_ALCHEMY=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 1d0157d3a5bb..eaf608ca65a6 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index d0491a05ee58..62c5a7098ab1 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 16d78d3cd2aa..29c8548b68f7 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -27,7 +27,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 780c7fc24b82..c714f43e7dc8 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index 267f21ed1d0f..c1adcfac6c54 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig index 470f6f4d3ea2..9e1083626292 100644 --- a/arch/mips/configs/rbhma4200_defconfig +++ b/arch/mips/configs/rbhma4200_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 5a39f56b175e..462a652ee022 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 56371b860eb0..2562f355dbf1 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 4b8799802788..ff89765f87f7 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig index 3ee75b15c0b0..d3db59bf399b 100644 --- a/arch/mips/configs/sead_defconfig +++ b/arch/mips/configs/sead_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set CONFIG_MIPS_SEAD=y # CONFIG_WR_PPMC is not set diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index 8dd3ae39bcad..34ce11de5367 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index 2ba240e897c6..e5ae6b1839b2 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index a5d0f3c55ed1..2fdfd6659ef1 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index edf90b321fe6..ee411216d373 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -14,7 +14,6 @@ CONFIG_MIPS=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index 2e3c683b2052..66d3c11a0382 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set CONFIG_WR_PPMC=y diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index b6178ffbc523..daa4e48a7232 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -26,7 +26,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set diff --git a/arch/mips/mips-boards/atlas/Makefile b/arch/mips/mips-boards/atlas/Makefile deleted file mode 100644 index f71c2dd1041a..000000000000 --- a/arch/mips/mips-boards/atlas/Makefile +++ /dev/null @@ -1,22 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# - -obj-y := atlas_int.o atlas_setup.o -obj-$(CONFIG_KGDB) += atlas_gdb.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mips-boards/atlas/atlas_gdb.c b/arch/mips/mips-boards/atlas/atlas_gdb.c deleted file mode 100644 index 00c98cff62dc..000000000000 --- a/arch/mips/mips-boards/atlas/atlas_gdb.c +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * This is the interface to the remote debugger stub. - */ -#include -#include -#include - -#define INB(a) inb((unsigned long)a) -#define OUTB(x, a) outb(x, (unsigned long)a) - -/* - * This is the interface to the remote debugger stub - * if the Philips part is used for the debug port, - * called from the platform setup code. - */ -void *saa9730_base = (void *)ATLAS_SAA9730_REG; - -static int saa9730_kgdb_active = 0; - -#define SAA9730_BAUDCLOCK(baud) (((ATLAS_SAA9730_BAUDCLOCK/(baud))/16)-1) - -int saa9730_kgdb_hook(int speed) -{ - int baudclock; - t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR); - - /* - * Clear all interrupts - */ - (void) INB(&kgdb_uart->Lsr); - (void) INB(&kgdb_uart->Msr); - (void) INB(&kgdb_uart->Thr_Rbr); - (void) INB(&kgdb_uart->Iir_Fcr); - - /* - * Now, initialize the UART - */ - /* 8 data bits, one stop bit, no parity */ - OUTB(SAA9730_LCR_DATA8, &kgdb_uart->Lcr); - - baudclock = SAA9730_BAUDCLOCK(speed); - - OUTB((baudclock >> 16) & 0xff, &kgdb_uart->BaudDivMsb); - OUTB( baudclock & 0xff, &kgdb_uart->BaudDivLsb); - - /* Set RTS/DTR active */ - OUTB(SAA9730_MCR_DTR | SAA9730_MCR_RTS, &kgdb_uart->Mcr); - saa9730_kgdb_active = 1; - - return speed; -} - -int saa9730_putDebugChar(char c) -{ - t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR); - - if (!saa9730_kgdb_active) { /* need to init device first */ - return 0; - } - - while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_THRE)) - ; - OUTB(c, &kgdb_uart->Thr_Rbr); - - return 1; -} - -char saa9730_getDebugChar(void) -{ - t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR); - char c; - - if (!saa9730_kgdb_active) { /* need to init device first */ - return 0; - } - while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_DR)) - ; - - c = INB(&kgdb_uart->Thr_Rbr); - return(c); -} diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c deleted file mode 100644 index 6fb29c3ff62d..000000000000 --- a/arch/mips/mips-boards/atlas/atlas_int.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Copyright (C) 1999, 2000, 2006 MIPS Technologies, Inc. - * All rights reserved. - * Authors: Carsten Langgaard - * Maciej W. Rozycki - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Routines for generic manipulation of the interrupts found on the MIPS - * Atlas board. - * - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include - -static struct atlas_ictrl_regs *atlas_hw0_icregs; - -#if 0 -#define DEBUG_INT(x...) printk(x) -#else -#define DEBUG_INT(x...) -#endif - -void disable_atlas_irq(unsigned int irq_nr) -{ - atlas_hw0_icregs->intrsten = 1 << (irq_nr - ATLAS_INT_BASE); - iob(); -} - -void enable_atlas_irq(unsigned int irq_nr) -{ - atlas_hw0_icregs->intseten = 1 << (irq_nr - ATLAS_INT_BASE); - iob(); -} - -static void end_atlas_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_atlas_irq(irq); -} - -static struct irq_chip atlas_irq_type = { - .name = "Atlas", - .ack = disable_atlas_irq, - .mask = disable_atlas_irq, - .mask_ack = disable_atlas_irq, - .unmask = enable_atlas_irq, - .eoi = enable_atlas_irq, - .end = end_atlas_irq, -}; - -static inline int ls1bit32(unsigned int x) -{ - int b = 31, s; - - s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s; - s = 8; if (x << 8 == 0) s = 0; b -= s; x <<= s; - s = 4; if (x << 4 == 0) s = 0; b -= s; x <<= s; - s = 2; if (x << 2 == 0) s = 0; b -= s; x <<= s; - s = 1; if (x << 1 == 0) s = 0; b -= s; - - return b; -} - -static inline void atlas_hw0_irqdispatch(void) -{ - unsigned long int_status; - int irq; - - int_status = atlas_hw0_icregs->intstatus; - - /* if int_status == 0, then the interrupt has already been cleared */ - if (unlikely(int_status == 0)) - return; - - irq = ATLAS_INT_BASE + ls1bit32(int_status); - - DEBUG_INT("atlas_hw0_irqdispatch: irq=%d\n", irq); - - do_IRQ(irq); -} - -static inline int clz(unsigned long x) -{ - __asm__( - " .set push \n" - " .set mips32 \n" - " clz %0, %1 \n" - " .set pop \n" - : "=r" (x) - : "r" (x)); - - return x; -} - -/* - * Version of ffs that only looks at bits 12..15. - */ -static inline unsigned int irq_ffs(unsigned int pending) -{ -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - return -clz(pending) + 31 - CAUSEB_IP; -#else - unsigned int a0 = 7; - unsigned int t0; - - t0 = s0 & 0xf000; - t0 = t0 < 1; - t0 = t0 << 2; - a0 = a0 - t0; - s0 = s0 << t0; - - t0 = s0 & 0xc000; - t0 = t0 < 1; - t0 = t0 << 1; - a0 = a0 - t0; - s0 = s0 << t0; - - t0 = s0 & 0x8000; - t0 = t0 < 1; - //t0 = t0 << 2; - a0 = a0 - t0; - //s0 = s0 << t0; - - return a0; -#endif -} - -/* - * IRQs on the Atlas board look basically like (all external interrupt - * sources are combined together on hardware interrupt 0 (MIPS IRQ 2)): - * - * MIPS IRQ Source - * -------- ------ - * 0 Software 0 (reschedule IPI on MT) - * 1 Software 1 (remote call IPI on MT) - * 2 Combined Atlas hardware interrupt (hw0) - * 3 Hardware (ignored) - * 4 Hardware (ignored) - * 5 Hardware (ignored) - * 6 Hardware (ignored) - * 7 R4k timer (what we use) - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Lowest ---- Software 0 - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; - int irq; - - irq = irq_ffs(pending); - - if (irq == MIPSCPU_INT_ATLAS) - atlas_hw0_irqdispatch(); - else if (irq >= 0) - do_IRQ(MIPS_CPU_IRQ_BASE + irq); - else - spurious_interrupt(); -} - -static inline void init_atlas_irqs(int base) -{ - int i; - - atlas_hw0_icregs = (struct atlas_ictrl_regs *) - ioremap(ATLAS_ICTRL_REGS_BASE, - sizeof(struct atlas_ictrl_regs *)); - - /* - * Mask out all interrupt by writing "1" to all bit position in - * the interrupt reset reg. - */ - atlas_hw0_icregs->intrsten = 0xffffffff; - - for (i = ATLAS_INT_BASE; i <= ATLAS_INT_END; i++) - set_irq_chip_and_handler(i, &atlas_irq_type, handle_level_irq); -} - -static struct irqaction atlasirq = { - .handler = no_action, - .name = "Atlas cascade" -}; - -msc_irqmap_t __initdata msc_irqmap[] = { - {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0}, - {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0}, -}; -int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap); - -msc_irqmap_t __initdata msc_eicirqmap[] = { - {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_ATLAS, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0}, - {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} -}; -int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); - -void __init arch_init_irq(void) -{ - init_atlas_irqs(ATLAS_INT_BASE); - - if (!cpu_has_veic) - mips_cpu_irq_init(); - - switch(mips_revision_corid) { - case MIPS_REVISION_CORID_CORE_MSC: - case MIPS_REVISION_CORID_CORE_FPGA2: - case MIPS_REVISION_CORID_CORE_FPGA3: - case MIPS_REVISION_CORID_CORE_FPGA4: - case MIPS_REVISION_CORID_CORE_24K: - case MIPS_REVISION_CORID_CORE_EMUL_MSC: - if (cpu_has_veic) - init_msc_irqs(MSC01E_INT_BASE, MSC01E_INT_BASE, - msc_eicirqmap, msc_nr_eicirqs); - else - init_msc_irqs(MSC01E_INT_BASE, MSC01C_INT_BASE, - msc_irqmap, msc_nr_irqs); - } - - if (cpu_has_veic) { - set_vi_handler(MSC01E_INT_ATLAS, atlas_hw0_irqdispatch); - setup_irq(MSC01E_INT_BASE + MSC01E_INT_ATLAS, &atlasirq); - } else if (cpu_has_vint) { - set_vi_handler(MIPSCPU_INT_ATLAS, atlas_hw0_irqdispatch); -#ifdef CONFIG_MIPS_MT_SMTC - setup_irq_smtc(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, - &atlasirq, (0x100 << MIPSCPU_INT_ATLAS)); -#else /* Not SMTC */ - setup_irq(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, &atlasirq); -#endif /* CONFIG_MIPS_MT_SMTC */ - } else - setup_irq(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, &atlasirq); -} diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c deleted file mode 100644 index 5c500802271e..000000000000 --- a/arch/mips/mips-boards/atlas/atlas_setup.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static void __init serial_init(void); - -const char *get_system_type(void) -{ - return "MIPS Atlas"; -} - -const char display_string[] = " LINUX ON ATLAS "; - -void __init plat_mem_setup(void) -{ - mips_pcibios_init(); - - ioport_resource.end = 0x7fffffff; - - serial_init(); - -#ifdef CONFIG_KGDB - kgdb_config(); -#endif - mips_reboot_setup(); -} - -static void __init serial_init(void) -{ -#ifdef CONFIG_SERIAL_8250 - struct uart_port s; - - memset(&s, 0, sizeof(s)); - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - s.iobase = ATLAS_UART_REGS_BASE; -#else - s.iobase = ATLAS_UART_REGS_BASE+3; -#endif - s.irq = ATLAS_INT_UART; - s.uartclk = ATLAS_BASE_BAUD * 16; - s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ; - s.iotype = UPIO_PORT; - s.regshift = 3; - - if (early_serial_setup(&s) != 0) { - printk(KERN_ERR "Serial setup failed!\n"); - } -#endif -} diff --git a/arch/mips/mips-boards/generic/console.c b/arch/mips/mips-boards/generic/console.c index 4d8ab99e4155..4a2aecc6da1b 100644 --- a/arch/mips/mips-boards/generic/console.c +++ b/arch/mips/mips-boards/generic/console.c @@ -22,16 +22,7 @@ #include #include -#ifdef CONFIG_MIPS_ATLAS -#include - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define PORT(offset) (ATLAS_UART_REGS_BASE + ((offset)<<3)) -#else -#define PORT(offset) (ATLAS_UART_REGS_BASE + 3 + ((offset)<<3)) -#endif - -#elif defined(CONFIG_MIPS_SEAD) +#if defined(CONFIG_MIPS_SEAD) #include diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c index 83b9dc739203..bac23b5fbf3f 100644 --- a/arch/mips/mips-boards/generic/init.c +++ b/arch/mips/mips-boards/generic/init.c @@ -197,14 +197,6 @@ void __init kgdb_config(void) while ((c = *++argptr) && ('0' <= c && c <= '9')) speed = speed * 10 + c - '0'; } -#ifdef CONFIG_MIPS_ATLAS - if (line == 1) { - speed = saa9730_kgdb_hook(speed); - generic_putDebugChar = saa9730_putDebugChar; - generic_getDebugChar = saa9730_getDebugChar; - } - else -#endif { speed = rs_kgdb_hook(line, speed); generic_putDebugChar = rs_putDebugChar; diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c index 583d468d98a9..5f73ff6180eb 100644 --- a/arch/mips/mips-boards/generic/reset.c +++ b/arch/mips/mips-boards/generic/reset.c @@ -27,15 +27,9 @@ #include #include #include -#if defined(CONFIG_MIPS_ATLAS) -#include -#endif static void mips_machine_restart(char *command); static void mips_machine_halt(void); -#if defined(CONFIG_MIPS_ATLAS) -static void atlas_machine_power_off(void); -#endif static void mips_machine_restart(char *command) { @@ -53,22 +47,11 @@ static void mips_machine_halt(void) __raw_writel(GORESET, softres_reg); } -#if defined(CONFIG_MIPS_ATLAS) -static void atlas_machine_power_off(void) -{ - unsigned int __iomem *psustby_reg = ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int)); - - writew(ATLAS_GOSTBY, psustby_reg); -} -#endif void mips_reboot_setup(void) { _machine_restart = mips_machine_restart; _machine_halt = mips_machine_halt; -#if defined(CONFIG_MIPS_ATLAS) - pm_power_off = atlas_machine_power_off; -#endif #if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD) pm_power_off = mips_machine_halt; #endif diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index fe2cac1b4514..d224267846b0 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -42,9 +42,6 @@ #include #include -#ifdef CONFIG_MIPS_ATLAS -#include -#endif #ifdef CONFIG_MIPS_MALTA #include #endif @@ -89,7 +86,7 @@ static unsigned int __init estimate_cpu_frequency(void) else count = 6000000; #endif -#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA) +#ifdef CONFIG_MIPS_MALTA unsigned long flags; unsigned int start; diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index ed0c07622baa..80fa5abb25d4 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -21,7 +21,6 @@ obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o # obj-$(CONFIG_BASLER_EXCITE) += ops-titan.o pci-excite.o fixup-excite.o obj-$(CONFIG_LASAT) += pci-lasat.o -obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c deleted file mode 100644 index 506e883a8c71..000000000000 --- a/arch/mips/pci/fixup-atlas.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright (C) 2003, 2004 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. - * Author: Maciej W. Rozycki - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include - -#include - -#define PCIA ATLAS_INT_PCIA -#define PCIB ATLAS_INT_PCIB -#define PCIC ATLAS_INT_PCIC -#define PCID ATLAS_INT_PCID -#define INTA ATLAS_INT_INTA -#define INTB ATLAS_INT_INTB -#define ETH ATLAS_INT_ETH -#define INTC ATLAS_INT_INTC -#define SCSI ATLAS_INT_SCSI -#define INTD ATLAS_INT_INTD - -static char irq_tab[][5] __initdata = { - /* INTA INTB INTC INTD */ - {0, 0, 0, 0, 0 }, /* 0: Unused */ - {0, 0, 0, 0, 0 }, /* 1: Unused */ - {0, 0, 0, 0, 0 }, /* 2: Unused */ - {0, 0, 0, 0, 0 }, /* 3: Unused */ - {0, 0, 0, 0, 0 }, /* 4: Unused */ - {0, 0, 0, 0, 0 }, /* 5: Unused */ - {0, 0, 0, 0, 0 }, /* 6: Unused */ - {0, 0, 0, 0, 0 }, /* 7: Unused */ - {0, 0, 0, 0, 0 }, /* 8: Unused */ - {0, 0, 0, 0, 0 }, /* 9: Unused */ - {0, 0, 0, 0, 0 }, /* 10: Unused */ - {0, 0, 0, 0, 0 }, /* 11: Unused */ - {0, 0, 0, 0, 0 }, /* 12: Unused */ - {0, 0, 0, 0, 0 }, /* 13: Unused */ - {0, 0, 0, 0, 0 }, /* 14: Unused */ - {0, PCIA, PCIB, PCIC, PCID }, /* 15: cPCI (behind 21150) */ - {0, SCSI, 0, 0, 0 }, /* 16: SYM53C810A SCSI */ - {0, 0, 0, 0, 0 }, /* 17: Core */ - {0, INTA, INTB, INTC, INTD }, /* 18: PCI Slot */ - {0, ETH, 0, 0, 0 }, /* 19: SAA9730 Eth. et al. */ - {0, 0, 0, 0, 0 }, /* 20: Unused */ - {0, 0, 0, 0, 0 } /* 21: Unused */ -}; - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return irq_tab[slot][pin]; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} - -#ifdef CONFIG_KGDB -/* - * The PCI scan may have moved the saa9730 I/O address, so reread - * the address here. - * This does mean that it's not possible to debug the PCI bus configuration - * code, but it is better than nothing... - */ - -static void atlas_saa9730_base_fixup(struct pci_dev *pdev) -{ - extern void *saa9730_base; - if (pdev->bus == 0 && PCI_SLOT(pdev->devfn) == 19) - (void) pci_read_config_dword(pdev, 0x14, (u32 *)&saa9730_base); - printk("saa9730_base = %x\n", saa9730_base); -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9730, - atlas_saa9730_base_fixup); - -#endif diff --git a/include/asm-mips/mach-atlas/mc146818rtc.h b/include/asm-mips/mach-atlas/mc146818rtc.h deleted file mode 100644 index 51d337e1bbd1..000000000000 --- a/include/asm-mips/mach-atlas/mc146818rtc.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) 1999, 2000, 2005 MIPS Technologies, Inc. - * All rights reserved. - * Authors: Carsten Langgaard - * Maciej W. Rozycki - * Copyright (C) 2003, 05 Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#ifndef __ASM_MACH_ATLAS_MC146818RTC_H -#define __ASM_MACH_ATLAS_MC146818RTC_H - -#include - -#include - -#include -#include - -#define ARCH_RTC_LOCATION - -#define RTC_PORT(x) (ATLAS_RTC_ADR_REG + (x) * 8) -#define RTC_IO_EXTENT 0x100 -#define RTC_IOMAPPED 0 -#define RTC_IRQ ATLAS_INT_RTC - -static inline unsigned char CMOS_READ(unsigned long addr) -{ - volatile u32 *ireg = (void *)CKSEG1ADDR(RTC_PORT(0)); - volatile u32 *dreg = (void *)CKSEG1ADDR(RTC_PORT(1)); - - *ireg = addr; - return *dreg; -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long addr) -{ - volatile u32 *ireg = (void *)CKSEG1ADDR(RTC_PORT(0)); - volatile u32 *dreg = (void *)CKSEG1ADDR(RTC_PORT(1)); - - *ireg = addr; - *dreg = data; -} - -#define RTC_ALWAYS_BCD 0 - -#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900) - -#endif /* __ASM_MACH_ATLAS_MC146818RTC_H */ -- cgit v1.2.3 From 1398ddb2ebdb41e8efe6ba42505fd452704c8405 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:33 +0100 Subject: [MIPS] SEAD: Remove support code. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 20 - arch/mips/Makefile | 8 - arch/mips/configs/bcm47xx_defconfig | 1 - arch/mips/configs/bigsur_defconfig | 1 - arch/mips/configs/capcella_defconfig | 1 - arch/mips/configs/cobalt_defconfig | 1 - arch/mips/configs/db1000_defconfig | 1 - arch/mips/configs/db1100_defconfig | 1 - arch/mips/configs/db1200_defconfig | 1 - arch/mips/configs/db1500_defconfig | 1 - arch/mips/configs/db1550_defconfig | 1 - arch/mips/configs/decstation_defconfig | 1 - arch/mips/configs/e55_defconfig | 1 - arch/mips/configs/emma2rh_defconfig | 1 - arch/mips/configs/excite_defconfig | 1 - arch/mips/configs/fulong_defconfig | 1 - arch/mips/configs/ip22_defconfig | 1 - arch/mips/configs/ip27_defconfig | 1 - arch/mips/configs/ip28_defconfig | 1 - arch/mips/configs/ip32_defconfig | 1 - arch/mips/configs/jazz_defconfig | 1 - arch/mips/configs/jmr3927_defconfig | 1 - arch/mips/configs/lasat_defconfig | 1 - arch/mips/configs/malta_defconfig | 1 - arch/mips/configs/mipssim_defconfig | 1 - arch/mips/configs/mpc30x_defconfig | 1 - arch/mips/configs/msp71xx_defconfig | 1 - arch/mips/configs/mtx1_defconfig | 1 - arch/mips/configs/pb1100_defconfig | 1 - arch/mips/configs/pb1500_defconfig | 1 - arch/mips/configs/pb1550_defconfig | 1 - arch/mips/configs/pnx8550-jbs_defconfig | 1 - arch/mips/configs/pnx8550-stb810_defconfig | 1 - arch/mips/configs/rbhma4200_defconfig | 1 - arch/mips/configs/rbhma4500_defconfig | 1 - arch/mips/configs/rm200_defconfig | 1 - arch/mips/configs/sb1250-swarm_defconfig | 1 - arch/mips/configs/sead_defconfig | 641 ----------------------------- arch/mips/configs/tb0219_defconfig | 1 - arch/mips/configs/tb0226_defconfig | 1 - arch/mips/configs/tb0287_defconfig | 1 - arch/mips/configs/workpad_defconfig | 1 - arch/mips/configs/wrppmc_defconfig | 1 - arch/mips/configs/yosemite_defconfig | 1 - arch/mips/mips-boards/generic/console.c | 12 - arch/mips/mips-boards/generic/init.c | 4 - arch/mips/mips-boards/generic/reset.c | 2 +- arch/mips/mips-boards/generic/time.c | 5 +- arch/mips/mips-boards/sead/Makefile | 28 -- arch/mips/mips-boards/sead/sead_int.c | 117 ------ arch/mips/mips-boards/sead/sead_setup.c | 77 ---- include/asm-mips/mips-boards/generic.h | 9 - 52 files changed, 2 insertions(+), 962 deletions(-) delete mode 100644 arch/mips/configs/sead_defconfig delete mode 100644 arch/mips/mips-boards/sead/Makefile delete mode 100644 arch/mips/mips-boards/sead/sead_int.c delete mode 100644 arch/mips/mips-boards/sead/sead_setup.c diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 6383c700686c..a0381427ec5c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -217,26 +217,6 @@ config MIPS_MALTA This enables support for the MIPS Technologies Malta evaluation board. -config MIPS_SEAD - bool "MIPS SEAD board" - select CEVT_R4K - select CSRC_R4K - select IRQ_CPU - select DMA_NONCOHERENT - select SYS_HAS_EARLY_PRINTK - select MIPS_BOARDS_GEN - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_HAS_CPU_MIPS64_R1 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_SMARTMIPS - help - This enables support for the MIPS Technologies SEAD evaluation - board. - config MIPS_SIM bool 'MIPS simulator (MIPSsim)' select CEVT_R4K diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 9bc2c763909f..800a73db822a 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -317,14 +317,6 @@ cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-mips load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 all-$(CONFIG_MIPS_MALTA) := vmlinux.bin -# -# MIPS SEAD board -# -core-$(CONFIG_MIPS_SEAD) += arch/mips/mips-boards/sead/ -cflags-$(CONFIG_MIPS_SEAD) += -Iinclude/asm-mips/mach-mips -load-$(CONFIG_MIPS_SEAD) += 0xffffffff80100000 -all-$(CONFIG_MIPS_SEAD) := vmlinux.srec - # # MIPS SIM # diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig index 10d83e4aca58..d8694332b344 100644 --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -17,7 +17,6 @@ CONFIG_BCM47XX=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index a9926861f14c..a3bbbf067a3b 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index ee8a7fc99f54..185df23fd460 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig index ce31a47f1a15..2678b7ec3351 100644 --- a/arch/mips/configs/cobalt_defconfig +++ b/arch/mips/configs/cobalt_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS_COBALT=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index f99b6f8c9788..ebb8ad62b3a3 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_DB1000=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 0d6ba9e65ff5..ad4e5ef65592 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_DB1100=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index 0c6f2a469f09..d0dc2e83ad35 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_DB1200=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index 02db28f5dc03..9155082313c8 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_DB1500=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index a0f19f2e7d59..e4e324422cd9 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_DB1550=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index c1ab8a21bb07..9e65e6a2dcb3 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y CONFIG_MACH_DECSTATION=y # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 88c2420bc627..1bd84d42b14f 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig index 03f0baad1b67..634bb4eaf132 100644 --- a/arch/mips/configs/emma2rh_defconfig +++ b/arch/mips/configs/emma2rh_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig index 873597a4aaf1..3572e80356d2 100644 --- a/arch/mips/configs/excite_defconfig +++ b/arch/mips/configs/excite_defconfig @@ -28,7 +28,6 @@ CONFIG_BASLER_EXCITE=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig index 13e1ef2240ea..620980081a30 100644 --- a/arch/mips/configs/fulong_defconfig +++ b/arch/mips/configs/fulong_defconfig @@ -15,7 +15,6 @@ CONFIG_LEMOTE_FULONG=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_PNX8550_JBS is not set diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig index 7daf203c1481..cc8e6bf2b245 100644 --- a/arch/mips/configs/ip22_defconfig +++ b/arch/mips/configs/ip22_defconfig @@ -16,7 +16,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig index 83d769f941d6..138c575a0151 100644 --- a/arch/mips/configs/ip27_defconfig +++ b/arch/mips/configs/ip27_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig index 3c5090a248b7..822b01f643e3 100644 --- a/arch/mips/configs/ip28_defconfig +++ b/arch/mips/configs/ip28_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig index f8d1cf3e8749..fe4699df9626 100644 --- a/arch/mips/configs/ip32_defconfig +++ b/arch/mips/configs/ip32_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig index 72ff710c878f..bbacc35d804f 100644 --- a/arch/mips/configs/jazz_defconfig +++ b/arch/mips/configs/jazz_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set CONFIG_MACH_JAZZ=y # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 8dc8bef471b4..92000a3a871d 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig index a8fa2055c071..bc9159fda728 100644 --- a/arch/mips/configs/lasat_defconfig +++ b/arch/mips/configs/lasat_defconfig @@ -16,7 +16,6 @@ CONFIG_MIPS=y CONFIG_LASAT=y # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 9a8ed74cc1a9..55288cf50b72 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -16,7 +16,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set CONFIG_MIPS_MALTA=y -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig index 1d205446ee70..2c0a6314e901 100644 --- a/arch/mips/configs/mipssim_defconfig +++ b/arch/mips/configs/mipssim_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set CONFIG_MIPS_SIM=y # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 0c7f35acb702..8c720e51795b 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index 2dd2a4f38fbe..59d19472b161 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 17d66526fa48..bacf0dd0e345 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -15,7 +15,6 @@ CONFIG_MACH_ALCHEMY=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index eaf608ca65a6..6dfe6f793cef 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_PB1100=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index 62c5a7098ab1..c965a87e6a96 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_PB1500=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 29c8548b68f7..0778996c682f 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -28,7 +28,6 @@ CONFIG_MIPS_PB1550=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index c714f43e7dc8..37c7b5ffd474 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig index c1adcfac6c54..893e5c4ab66d 100644 --- a/arch/mips/configs/pnx8550-stb810_defconfig +++ b/arch/mips/configs/pnx8550-stb810_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig index 9e1083626292..f89482a2aa6b 100644 --- a/arch/mips/configs/rbhma4200_defconfig +++ b/arch/mips/configs/rbhma4200_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 462a652ee022..70cf69761673 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 2562f355dbf1..0f4da0325ea4 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index ff89765f87f7..1ea97865f2ce 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set # CONFIG_MACH_VR41XX is not set diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig deleted file mode 100644 index d3db59bf399b..000000000000 --- a/arch/mips/configs/sead_defconfig +++ /dev/null @@ -1,641 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Sun Feb 18 21:28:10 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_SEAD=y -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_MIPS_BOARDS_GEN=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_CPU_MIPS64_R1=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPSR1=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y -# CONFIG_CPU_HAS_SMARTMIPS is not set -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_SYS_SUPPORTS_SMARTMIPS=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_UTS_NS is not set -# CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -# CONFIG_NET is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=18432 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# Misc devices -# - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_RAID_ATTRS=y -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# ISDN subsystem -# - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# - -# -# Graphics support -# -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC16=y -# CONFIG_CRC32 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index 34ce11de5367..b5059881bc7e 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index e5ae6b1839b2..b06a716bf23f 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 2fdfd6659ef1..46512cf7ce04 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -17,7 +17,6 @@ CONFIG_MIPS=y # CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig index ee411216d373..b437eb7f8672 100644 --- a/arch/mips/configs/workpad_defconfig +++ b/arch/mips/configs/workpad_defconfig @@ -15,7 +15,6 @@ CONFIG_MIPS=y # CONFIG_MACH_JAZZ is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_MIPS_SIM is not set # CONFIG_MARKEINS is not set CONFIG_MACH_VR41XX=y diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig index 66d3c11a0382..fc2c56731b98 100644 --- a/arch/mips/configs/wrppmc_defconfig +++ b/arch/mips/configs/wrppmc_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set CONFIG_WR_PPMC=y # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig index daa4e48a7232..7f86c43d1bda 100644 --- a/arch/mips/configs/yosemite_defconfig +++ b/arch/mips/configs/yosemite_defconfig @@ -27,7 +27,6 @@ CONFIG_ZONE_DMA=y # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set # CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set # CONFIG_MOMENCO_JAGUAR_ATX is not set diff --git a/arch/mips/mips-boards/generic/console.c b/arch/mips/mips-boards/generic/console.c index 4a2aecc6da1b..43bcfb4f8167 100644 --- a/arch/mips/mips-boards/generic/console.c +++ b/arch/mips/mips-boards/generic/console.c @@ -22,21 +22,9 @@ #include #include -#if defined(CONFIG_MIPS_SEAD) - -#include - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define PORT(offset) (SEAD_UART0_REGS_BASE + ((offset)<<3)) -#else -#define PORT(offset) (SEAD_UART0_REGS_BASE + 3 + ((offset)<<3)) -#endif - -#else #define PORT(offset) (0x3f8 + (offset)) -#endif static inline unsigned int serial_in(int offset) { diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c index bac23b5fbf3f..c0653021a171 100644 --- a/arch/mips/mips-boards/generic/init.c +++ b/arch/mips/mips-boards/generic/init.c @@ -252,9 +252,6 @@ void __init prom_init(void) mips_display_message("LINUX"); -#ifdef CONFIG_MIPS_SEAD - set_io_port_base(KSEG1); -#else /* * early setup of _pcictrl_bonito so that we can determine * the system controller on a CORE_EMUL board @@ -406,7 +403,6 @@ void __init prom_init(void) mips_display_message("SC Error"); while (1); /* We die here... */ } -#endif board_nmi_handler_setup = mips_nmi_setup; board_ejtag_handler_setup = mips_ejtag_setup; diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c index 5f73ff6180eb..ea932b843962 100644 --- a/arch/mips/mips-boards/generic/reset.c +++ b/arch/mips/mips-boards/generic/reset.c @@ -52,7 +52,7 @@ void mips_reboot_setup(void) { _machine_restart = mips_machine_restart; _machine_halt = mips_machine_halt; -#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD) +#ifdef CONFIG_MIPS_MALTA pm_power_off = mips_machine_halt; #endif } diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index d224267846b0..637897e8e4fb 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -45,9 +45,6 @@ #ifdef CONFIG_MIPS_MALTA #include #endif -#ifdef CONFIG_MIPS_SEAD -#include -#endif unsigned long cpu_khz; @@ -73,7 +70,7 @@ static unsigned int __init estimate_cpu_frequency(void) unsigned int prid = read_c0_prid() & 0xffff00; unsigned int count; -#if defined(CONFIG_MIPS_SEAD) || defined(CONFIG_MIPS_SIM) +#ifdef CONFIG_MIPS_SIM /* * The SEAD board doesn't have a real time clock, so we can't * really calculate the timer frequency diff --git a/arch/mips/mips-boards/sead/Makefile b/arch/mips/mips-boards/sead/Makefile deleted file mode 100644 index 3682fe217bd5..000000000000 --- a/arch/mips/mips-boards/sead/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. -# -# ######################################################################## -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# ####################################################################### -# -# Makefile for the MIPS SEAD specific kernel interface routines -# under Linux. -# - -obj-y := sead_int.o sead_setup.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c deleted file mode 100644 index ec6dd194c14a..000000000000 --- a/arch/mips/mips-boards/sead/sead_int.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. - * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2004 Maciej W. Rozycki - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Routines for generic manipulation of the interrupts found on the MIPS - * Sead board. - */ -#include -#include - -#include -#include -#include - -#include - -static inline int clz(unsigned long x) -{ - __asm__( - " .set push \n" - " .set mips32 \n" - " clz %0, %1 \n" - " .set pop \n" - : "=r" (x) - : "r" (x)); - - return x; -} - -/* - * Version of ffs that only looks at bits 12..15. - */ -static inline unsigned int irq_ffs(unsigned int pending) -{ -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - return -clz(pending) + 31 - CAUSEB_IP; -#else - unsigned int a0 = 7; - unsigned int t0; - - t0 = s0 & 0xf000; - t0 = t0 < 1; - t0 = t0 << 2; - a0 = a0 - t0; - s0 = s0 << t0; - - t0 = s0 & 0xc000; - t0 = t0 < 1; - t0 = t0 << 1; - a0 = a0 - t0; - s0 = s0 << t0; - - t0 = s0 & 0x8000; - t0 = t0 < 1; - //t0 = t0 << 2; - a0 = a0 - t0; - //s0 = s0 << t0; - - return a0; -#endif -} - -/* - * IRQs on the SEAD board look basically are combined together on hardware - * interrupt 0 (MIPS IRQ 2)) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 UART0 (hw0) - * 3 UART1 (hw1) - * 4 Hardware (ignored) - * 5 Hardware (ignored) - * 6 Hardware (ignored) - * 7 R4k timer (what we use) - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Lowest ---- Combined hardware interrupt - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; - int irq; - - irq = irq_ffs(pending); - - if (irq >= 0) - do_IRQ(MIPS_CPU_IRQ_BASE + irq); - else - spurious_interrupt(); -} - -void __init arch_init_irq(void) -{ - mips_cpu_irq_init(); -} diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c deleted file mode 100644 index 8aa8e5b7b074..000000000000 --- a/arch/mips/mips-boards/sead/sead_setup.c +++ /dev/null @@ -1,77 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * SEAD specific setup. - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -static void __init serial_init(void); - -const char *get_system_type(void) -{ - return "MIPS SEAD"; -} - -const char display_string[] = " LINUX ON SEAD "; - -void __init plat_mem_setup(void) -{ - ioport_resource.end = 0x7fffffff; - - serial_init(); - - mips_reboot_setup(); -} - -static void __init serial_init(void) -{ -#ifdef CONFIG_SERIAL_8250 - struct uart_port s; - - memset(&s, 0, sizeof(s)); - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - s.iobase = SEAD_UART0_REGS_BASE; -#else - s.iobase = SEAD_UART0_REGS_BASE+3; -#endif - s.irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_UART0; - s.uartclk = SEAD_BASE_BAUD * 16; - s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ; - s.iotype = UPIO_PORT; - s.regshift = 3; - - if (early_serial_setup(&s) != 0) { - printk(KERN_ERR "Serial setup failed!\n"); - } -#endif -} diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h index 33407bee4e73..7f0b034dd9a5 100644 --- a/include/asm-mips/mips-boards/generic.h +++ b/include/asm-mips/mips-boards/generic.h @@ -27,12 +27,8 @@ /* * Display register base. */ -#ifdef CONFIG_MIPS_SEAD -#define ASCII_DISPLAY_POS_BASE 0x1f0005c0 -#else #define ASCII_DISPLAY_WORD_BASE 0x1f000410 #define ASCII_DISPLAY_POS_BASE 0x1f000418 -#endif /* @@ -44,13 +40,8 @@ /* * Reset register. */ -#ifdef CONFIG_MIPS_SEAD -#define SOFTRES_REG 0x1e800050 -#define GORESET 0x4d -#else #define SOFTRES_REG 0x1f000500 #define GORESET 0x42 -#endif /* * Revision register. -- cgit v1.2.3 From 6da5e30b879394f0c55b2bbf3353d797097c8f0f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:34 +0100 Subject: [MIPS] Remove impossible ifdef and code wrapped by it. Signed-off-by: Ralf Baechle --- arch/mips/mips-boards/generic/time.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 637897e8e4fb..744dbfc6e484 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -70,19 +70,6 @@ static unsigned int __init estimate_cpu_frequency(void) unsigned int prid = read_c0_prid() & 0xffff00; unsigned int count; -#ifdef CONFIG_MIPS_SIM - /* - * The SEAD board doesn't have a real time clock, so we can't - * really calculate the timer frequency - * For now we hardwire the SEAD board frequency to 12MHz. - */ - - if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) || - (prid == (PRID_COMP_MIPS | PRID_IMP_25KF))) - count = 12000000; - else - count = 6000000; -#endif #ifdef CONFIG_MIPS_MALTA unsigned long flags; unsigned int start; -- cgit v1.2.3 From d5deda6fa1ca434d36c2daffb63127e92c6470f5 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:34 +0100 Subject: [MIPS] MSC01: Cleanup configuration. This shouldn't depend on CONFIG_MIPS_BOARDS_GEN which is about to go away. Signed-off-by: Ralf Baechle --- arch/mips/kernel/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 48ae915b38e0..0fd31974ba28 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -60,7 +60,7 @@ obj-$(CONFIG_I8259) += i8259.o obj-$(CONFIG_IRQ_CPU) += irq_cpu.o obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o obj-$(CONFIG_IRQ_CPU_RM9K) += irq-rm9000.o -obj-$(CONFIG_MIPS_BOARDS_GEN) += irq-msc01.o +obj-$(CONFIG_MIPS_MSC) += irq-msc01.o obj-$(CONFIG_IRQ_TXX9) += irq_txx9.o obj-$(CONFIG_IRQ_GT641XX) += irq-gt641xx.o obj-$(CONFIG_IRQ_GIC) += irq-gic.o -- cgit v1.2.3 From eda49eeebf263f3a34f6968959fc2e4825b42beb Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:34 +0100 Subject: [MIPS] Remove always true ifdef conditions. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 8 ++------ arch/mips/configs/malta_defconfig | 1 - arch/mips/mips-boards/generic/memory.c | 6 ------ arch/mips/mips-boards/generic/reset.c | 2 -- arch/mips/mips-boards/generic/time.c | 4 ---- 5 files changed, 2 insertions(+), 19 deletions(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 800a73db822a..ed8821ac8a8e 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -304,15 +304,11 @@ core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/ load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000 cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote -# -# For all MIPS, Inc. eval boards -# -core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/ - # # MIPS Malta board # -core-$(CONFIG_MIPS_MALTA) += arch/mips/mips-boards/malta/ +core-$(CONFIG_MIPS_MALTA) += arch/mips/mips-boards/generic/ \ + arch/mips/mips-boards/malta/ cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-mips load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 all-$(CONFIG_MIPS_MALTA) := vmlinux.bin diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 55288cf50b72..74daa0cf87e6 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -66,7 +66,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y -CONFIG_MIPS_BOARDS_GEN=y CONFIG_PCI_GT64XXX_PCI0=y CONFIG_SWAP_IO_SPACE=y CONFIG_BOOT_ELF32=y diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c index 5e443bba5662..61888ff72c87 100644 --- a/arch/mips/mips-boards/generic/memory.c +++ b/arch/mips/mips-boards/generic/memory.c @@ -97,7 +97,6 @@ static struct prom_pmemblock * __init prom_getmdesc(void) mdesc[1].base = 0x00001000; mdesc[1].size = 0x000ef000; -#ifdef CONFIG_MIPS_MALTA /* * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the * south bridge and PCI access always forwarded to the ISA Bus and @@ -108,11 +107,6 @@ static struct prom_pmemblock * __init prom_getmdesc(void) mdesc[2].type = yamon_dontuse; mdesc[2].base = 0x000f0000; mdesc[2].size = 0x00010000; -#else - mdesc[2].type = yamon_prom; - mdesc[2].base = 0x000f0000; - mdesc[2].size = 0x00010000; -#endif mdesc[3].type = yamon_dontuse; mdesc[3].base = 0x00100000; diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c index ea932b843962..42dee4da37ba 100644 --- a/arch/mips/mips-boards/generic/reset.c +++ b/arch/mips/mips-boards/generic/reset.c @@ -52,7 +52,5 @@ void mips_reboot_setup(void) { _machine_restart = mips_machine_restart; _machine_halt = mips_machine_halt; -#ifdef CONFIG_MIPS_MALTA pm_power_off = mips_machine_halt; -#endif } diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 744dbfc6e484..0b97d47691fc 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -42,9 +42,7 @@ #include #include -#ifdef CONFIG_MIPS_MALTA #include -#endif unsigned long cpu_khz; @@ -70,7 +68,6 @@ static unsigned int __init estimate_cpu_frequency(void) unsigned int prid = read_c0_prid() & 0xffff00; unsigned int count; -#ifdef CONFIG_MIPS_MALTA unsigned long flags; unsigned int start; @@ -91,7 +88,6 @@ static unsigned int __init estimate_cpu_frequency(void) /* restore interrupts */ local_irq_restore(flags); -#endif mips_hpt_frequency = count; if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && -- cgit v1.2.3 From 315806cb19f9d375dccbc2d60fa14e16afdcd5ac Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 15 Jul 2008 18:44:34 +0100 Subject: [MIPS] Malta: Cleanup organization of code into directories. Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 5 +- arch/mips/mips-boards/generic/Makefile | 29 - arch/mips/mips-boards/generic/amon.c | 80 --- arch/mips/mips-boards/generic/cmdline.c | 59 -- arch/mips/mips-boards/generic/console.c | 47 -- arch/mips/mips-boards/generic/display.c | 64 -- arch/mips/mips-boards/generic/gdb_hook.c | 133 ---- arch/mips/mips-boards/generic/init.c | 424 ------------ arch/mips/mips-boards/generic/memory.c | 177 ----- arch/mips/mips-boards/generic/pci.c | 243 ------- arch/mips/mips-boards/generic/reset.c | 56 -- arch/mips/mips-boards/generic/time.c | 163 ----- arch/mips/mips-boards/malta/Makefile | 27 - arch/mips/mips-boards/malta/malta_int.c | 712 --------------------- arch/mips/mips-boards/malta/malta_mtd.c | 63 -- arch/mips/mips-boards/malta/malta_platform.c | 65 -- arch/mips/mips-boards/malta/malta_setup.c | 229 ------- arch/mips/mips-boards/malta/malta_smtc.c | 154 ----- arch/mips/mti-malta/Makefile | 21 + arch/mips/mti-malta/malta-amon.c | 80 +++ arch/mips/mti-malta/malta-cmdline.c | 59 ++ arch/mips/mti-malta/malta-console.c | 47 ++ arch/mips/mti-malta/malta-display.c | 64 ++ arch/mips/mti-malta/malta-init.c | 424 ++++++++++++ arch/mips/mti-malta/malta-int.c | 712 +++++++++++++++++++++ arch/mips/mti-malta/malta-kgdb.c | 133 ++++ arch/mips/mti-malta/malta-memory.c | 177 +++++ arch/mips/mti-malta/malta-mtd.c | 63 ++ arch/mips/mti-malta/malta-pci.c | 243 +++++++ arch/mips/mti-malta/malta-platform.c | 65 ++ arch/mips/mti-malta/malta-reset.c | 56 ++ arch/mips/mti-malta/malta-setup.c | 229 +++++++ arch/mips/mti-malta/malta-smtc.c | 154 +++++ arch/mips/mti-malta/malta-time.c | 163 +++++ .../asm-mips/mach-malta/cpu-feature-overrides.h | 72 +++ include/asm-mips/mach-malta/irq.h | 9 + include/asm-mips/mach-malta/kernel-entry-init.h | 52 ++ include/asm-mips/mach-malta/mach-gt64120.h | 19 + include/asm-mips/mach-malta/mc146818rtc.h | 48 ++ include/asm-mips/mach-malta/war.h | 25 + include/asm-mips/mach-mips/cpu-feature-overrides.h | 72 --- include/asm-mips/mach-mips/irq.h | 9 - include/asm-mips/mach-mips/kernel-entry-init.h | 52 -- include/asm-mips/mach-mips/mach-gt64120.h | 19 - include/asm-mips/mach-mips/mc146818rtc.h | 48 -- include/asm-mips/mach-mips/war.h | 25 - 46 files changed, 2917 insertions(+), 2953 deletions(-) delete mode 100644 arch/mips/mips-boards/generic/Makefile delete mode 100644 arch/mips/mips-boards/generic/amon.c delete mode 100644 arch/mips/mips-boards/generic/cmdline.c delete mode 100644 arch/mips/mips-boards/generic/console.c delete mode 100644 arch/mips/mips-boards/generic/display.c delete mode 100644 arch/mips/mips-boards/generic/gdb_hook.c delete mode 100644 arch/mips/mips-boards/generic/init.c delete mode 100644 arch/mips/mips-boards/generic/memory.c delete mode 100644 arch/mips/mips-boards/generic/pci.c delete mode 100644 arch/mips/mips-boards/generic/reset.c delete mode 100644 arch/mips/mips-boards/generic/time.c delete mode 100644 arch/mips/mips-boards/malta/Makefile delete mode 100644 arch/mips/mips-boards/malta/malta_int.c delete mode 100644 arch/mips/mips-boards/malta/malta_mtd.c delete mode 100644 arch/mips/mips-boards/malta/malta_platform.c delete mode 100644 arch/mips/mips-boards/malta/malta_setup.c delete mode 100644 arch/mips/mips-boards/malta/malta_smtc.c create mode 100644 arch/mips/mti-malta/Makefile create mode 100644 arch/mips/mti-malta/malta-amon.c create mode 100644 arch/mips/mti-malta/malta-cmdline.c create mode 100644 arch/mips/mti-malta/malta-console.c create mode 100644 arch/mips/mti-malta/malta-display.c create mode 100644 arch/mips/mti-malta/malta-init.c create mode 100644 arch/mips/mti-malta/malta-int.c create mode 100644 arch/mips/mti-malta/malta-kgdb.c create mode 100644 arch/mips/mti-malta/malta-memory.c create mode 100644 arch/mips/mti-malta/malta-mtd.c create mode 100644 arch/mips/mti-malta/malta-pci.c create mode 100644 arch/mips/mti-malta/malta-platform.c create mode 100644 arch/mips/mti-malta/malta-reset.c create mode 100644 arch/mips/mti-malta/malta-setup.c create mode 100644 arch/mips/mti-malta/malta-smtc.c create mode 100644 arch/mips/mti-malta/malta-time.c create mode 100644 include/asm-mips/mach-malta/cpu-feature-overrides.h create mode 100644 include/asm-mips/mach-malta/irq.h create mode 100644 include/asm-mips/mach-malta/kernel-entry-init.h create mode 100644 include/asm-mips/mach-malta/mach-gt64120.h create mode 100644 include/asm-mips/mach-malta/mc146818rtc.h create mode 100644 include/asm-mips/mach-malta/war.h delete mode 100644 include/asm-mips/mach-mips/cpu-feature-overrides.h delete mode 100644 include/asm-mips/mach-mips/irq.h delete mode 100644 include/asm-mips/mach-mips/kernel-entry-init.h delete mode 100644 include/asm-mips/mach-mips/mach-gt64120.h delete mode 100644 include/asm-mips/mach-mips/mc146818rtc.h delete mode 100644 include/asm-mips/mach-mips/war.h diff --git a/arch/mips/Makefile b/arch/mips/Makefile index ed8821ac8a8e..36aa690484c8 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -307,9 +307,8 @@ cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote # # MIPS Malta board # -core-$(CONFIG_MIPS_MALTA) += arch/mips/mips-boards/generic/ \ - arch/mips/mips-boards/malta/ -cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-mips +core-$(CONFIG_MIPS_MALTA) += arch/mips/mti-malta/ +cflags-$(CONFIG_MIPS_MALTA) += -Iinclude/asm-mips/mach-malta load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 all-$(CONFIG_MIPS_MALTA) := vmlinux.bin diff --git a/arch/mips/mips-boards/generic/Makefile b/arch/mips/mips-boards/generic/Makefile deleted file mode 100644 index f7f87fc09d1e..000000000000 --- a/arch/mips/mips-boards/generic/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# Makefile for the MIPS boards generic routines under Linux. -# - -obj-y := reset.o display.o init.o memory.o \ - cmdline.o time.o -obj-y += amon.o - -obj-$(CONFIG_EARLY_PRINTK) += console.o -obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_KGDB) += gdb_hook.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mips-boards/generic/amon.c deleted file mode 100644 index 96236bf33838..000000000000 --- a/arch/mips/mips-boards/generic/amon.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Copyright (C) 2007 MIPS Technologies, Inc. - * All rights reserved. - - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Arbitrary Monitor interface - */ - -#include -#include -#include - -#include -#include -#include - -int amon_cpu_avail(int cpu) -{ - struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); - - if (cpu < 0 || cpu >= NCPULAUNCH) { - pr_debug("avail: cpu%d is out of range\n", cpu); - return 0; - } - - launch += cpu; - if (!(launch->flags & LAUNCH_FREADY)) { - pr_debug("avail: cpu%d is not ready\n", cpu); - return 0; - } - if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) { - pr_debug("avail: too late.. cpu%d is already gone\n", cpu); - return 0; - } - - return 1; -} - -void amon_cpu_start(int cpu, - unsigned long pc, unsigned long sp, - unsigned long gp, unsigned long a0) -{ - volatile struct cpulaunch *launch = - (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); - - if (!amon_cpu_avail(cpu)) - return; - if (cpu == smp_processor_id()) { - pr_debug("launch: I am cpu%d!\n", cpu); - return; - } - launch += cpu; - - pr_debug("launch: starting cpu%d\n", cpu); - - launch->pc = pc; - launch->gp = gp; - launch->sp = sp; - launch->a0 = a0; - - /* Make sure target sees parameters before the go bit */ - smp_mb(); - - launch->flags |= LAUNCH_FGO; - while ((launch->flags & LAUNCH_FGONE) == 0) - ; - pr_debug("launch: cpu%d gone!\n", cpu); -} diff --git a/arch/mips/mips-boards/generic/cmdline.c b/arch/mips/mips-boards/generic/cmdline.c deleted file mode 100644 index 1871c30ed2eb..000000000000 --- a/arch/mips/mips-boards/generic/cmdline.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Kernel command line creation using the prom monitor (YAMON) argc/argv. - */ -#include -#include - -#include - -extern int prom_argc; -extern int *_prom_argv; - -/* - * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. - * This macro take care of sign extension. - */ -#define prom_argv(index) ((char *)(long)_prom_argv[(index)]) - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - - -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { - strcpy(cp, prom_argv(actr)); - cp += strlen(prom_argv(actr)); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) { - /* get rid of trailing space */ - --cp; - *cp = '\0'; - } -} diff --git a/arch/mips/mips-boards/generic/console.c b/arch/mips/mips-boards/generic/console.c deleted file mode 100644 index 43bcfb4f8167..000000000000 --- a/arch/mips/mips-boards/generic/console.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Putting things on the screen/serial line using YAMONs facilities. - */ -#include -#include -#include -#include - - -#define PORT(offset) (0x3f8 + (offset)) - - -static inline unsigned int serial_in(int offset) -{ - return inb(PORT(offset)); -} - -static inline void serial_out(int offset, int value) -{ - outb(value, PORT(offset)); -} - -int prom_putchar(char c) -{ - while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0) - ; - - serial_out(UART_TX, c); - - return 1; -} diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mips-boards/generic/display.c deleted file mode 100644 index 7c8828fcb0ad..000000000000 --- a/arch/mips/mips-boards/generic/display.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Display routines for display messages in MIPS boards ascii display. - */ - -#include -#include -#include -#include -#include - -extern const char display_string[]; -static unsigned int display_count; -static unsigned int max_display_count; - -void mips_display_message(const char *str) -{ - static unsigned int __iomem *display = NULL; - int i; - - if (unlikely(display == NULL)) - display = ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int)); - - for (i = 0; i <= 14; i=i+2) { - if (*str) - __raw_writel(*str++, display + i); - else - __raw_writel(' ', display + i); - } -} - -static void scroll_display_message(unsigned long data); -static DEFINE_TIMER(mips_scroll_timer, scroll_display_message, HZ, 0); - -static void scroll_display_message(unsigned long data) -{ - mips_display_message(&display_string[display_count++]); - if (display_count == max_display_count) - display_count = 0; - - mod_timer(&mips_scroll_timer, jiffies + HZ); -} - -void mips_scroll_message(void) -{ - del_timer_sync(&mips_scroll_timer); - max_display_count = strlen(display_string) + 1 - 8; - mod_timer(&mips_scroll_timer, jiffies + 1); -} diff --git a/arch/mips/mips-boards/generic/gdb_hook.c b/arch/mips/mips-boards/generic/gdb_hook.c deleted file mode 100644 index 6a1854de4579..000000000000 --- a/arch/mips/mips-boards/generic/gdb_hook.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * This is the interface to the remote debugger stub. - */ -#include -#include -#include -#include - -#include -#include - -static struct serial_state rs_table[] = { - SERIAL_PORT_DFNS /* Defined in serial.h */ -}; - -static struct async_struct kdb_port_info = {0}; - -int (*generic_putDebugChar)(char); -char (*generic_getDebugChar)(void); - -static __inline__ unsigned int serial_in(struct async_struct *info, int offset) -{ - return inb(info->port + offset); -} - -static __inline__ void serial_out(struct async_struct *info, int offset, - int value) -{ - outb(value, info->port+offset); -} - -int rs_kgdb_hook(int tty_no, int speed) { - int t; - struct serial_state *ser = &rs_table[tty_no]; - - kdb_port_info.state = ser; - kdb_port_info.magic = SERIAL_MAGIC; - kdb_port_info.port = ser->port; - kdb_port_info.flags = ser->flags; - - /* - * Clear all interrupts - */ - serial_in(&kdb_port_info, UART_LSR); - serial_in(&kdb_port_info, UART_RX); - serial_in(&kdb_port_info, UART_IIR); - serial_in(&kdb_port_info, UART_MSR); - - /* - * Now, initialize the UART - */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */ - if (kdb_port_info.flags & ASYNC_FOURPORT) { - kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS; - t = UART_MCR_DTR | UART_MCR_OUT1; - } else { - kdb_port_info.MCR - = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; - t = UART_MCR_DTR | UART_MCR_RTS; - } - - kdb_port_info.MCR = t; /* no interrupts, please */ - serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR); - - /* - * and set the speed of the serial port - */ - if (speed == 0) - speed = 9600; - - t = kdb_port_info.state->baud_base / speed; - /* set DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB); - serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */ - serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */ - /* reset DLAB */ - serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); - - return speed; -} - -int putDebugChar(char c) -{ - return generic_putDebugChar(c); -} - -char getDebugChar(void) -{ - return generic_getDebugChar(); -} - -int rs_putDebugChar(char c) -{ - - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0) - ; - - serial_out(&kdb_port_info, UART_TX, c); - - return 1; -} - -char rs_getDebugChar(void) -{ - if (!kdb_port_info.state) { /* need to init device first */ - return 0; - } - - while (!(serial_in(&kdb_port_info, UART_LSR) & 1)) - ; - - return serial_in(&kdb_port_info, UART_RX); -} diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c deleted file mode 100644 index c0653021a171..000000000000 --- a/arch/mips/mips-boards/generic/init.c +++ /dev/null @@ -1,424 +0,0 @@ -/* - * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. - * All rights reserved. - * Authors: Carsten Langgaard - * Maciej W. Rozycki - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * PROM library initialisation code. - */ -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -#ifdef CONFIG_KGDB -extern int rs_kgdb_hook(int, int); -extern int rs_putDebugChar(char); -extern char rs_getDebugChar(void); -extern int saa9730_kgdb_hook(int); -extern int saa9730_putDebugChar(char); -extern char saa9730_getDebugChar(void); -#endif - -int prom_argc; -int *_prom_argv, *_prom_envp; - -/* - * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. - * This macro take care of sign extension, if running in 64-bit mode. - */ -#define prom_envp(index) ((char *)(long)_prom_envp[(index)]) - -int init_debug = 0; - -int mips_revision_corid; -int mips_revision_sconid; - -/* Bonito64 system controller register base. */ -unsigned long _pcictrl_bonito; -unsigned long _pcictrl_bonito_pcicfg; - -/* GT64120 system controller register base */ -unsigned long _pcictrl_gt64120; - -/* MIPS System controller register base */ -unsigned long _pcictrl_msc; - -char *prom_getenv(char *envname) -{ - /* - * Return a pointer to the given environment variable. - * In 64-bit mode: we're using 64-bit pointers, but all pointers - * in the PROM structures are only 32-bit, so we need some - * workarounds, if we are running in 64-bit mode. - */ - int i, index=0; - - i = strlen(envname); - - while (prom_envp(index)) { - if(strncmp(envname, prom_envp(index), i) == 0) { - return(prom_envp(index+1)); - } - index += 2; - } - - return NULL; -} - -static inline unsigned char str2hexnum(unsigned char c) -{ - if (c >= '0' && c <= '9') - return c - '0'; - if (c >= 'a' && c <= 'f') - return c - 'a' + 10; - return 0; /* foo */ -} - -static inline void str2eaddr(unsigned char *ea, unsigned char *str) -{ - int i; - - for (i = 0; i < 6; i++) { - unsigned char num; - - if((*str == '.') || (*str == ':')) - str++; - num = str2hexnum(*str++) << 4; - num |= (str2hexnum(*str++)); - ea[i] = num; - } -} - -int get_ethernet_addr(char *ethernet_addr) -{ - char *ethaddr_str; - - ethaddr_str = prom_getenv("ethaddr"); - if (!ethaddr_str) { - printk("ethaddr not set in boot prom\n"); - return -1; - } - str2eaddr(ethernet_addr, ethaddr_str); - - if (init_debug > 1) { - int i; - printk("get_ethernet_addr: "); - for (i=0; i<5; i++) - printk("%02x:", (unsigned char)*(ethernet_addr+i)); - printk("%02x\n", *(ethernet_addr+i)); - } - - return 0; -} - -#ifdef CONFIG_SERIAL_8250_CONSOLE -static void __init console_config(void) -{ - char console_string[40]; - int baud = 0; - char parity = '\0', bits = '\0', flow = '\0'; - char *s; - - if ((strstr(prom_getcmdline(), "console=")) == NULL) { - s = prom_getenv("modetty0"); - if (s) { - while (*s >= '0' && *s <= '9') - baud = baud*10 + *s++ - '0'; - if (*s == ',') s++; - if (*s) parity = *s++; - if (*s == ',') s++; - if (*s) bits = *s++; - if (*s == ',') s++; - if (*s == 'h') flow = 'r'; - } - if (baud == 0) - baud = 38400; - if (parity != 'n' && parity != 'o' && parity != 'e') - parity = 'n'; - if (bits != '7' && bits != '8') - bits = '8'; - if (flow == '\0') - flow = 'r'; - sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, parity, bits, flow); - strcat(prom_getcmdline(), console_string); - pr_info("Config serial console:%s\n", console_string); - } -} -#endif - -#ifdef CONFIG_KGDB -void __init kgdb_config(void) -{ - extern int (*generic_putDebugChar)(char); - extern char (*generic_getDebugChar)(void); - char *argptr; - int line, speed; - - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { - argptr += strlen("kgdb=ttyS"); - if (*argptr != '0' && *argptr != '1') - printk("KGDB: Unknown serial line /dev/ttyS%c, " - "falling back to /dev/ttyS1\n", *argptr); - line = *argptr == '0' ? 0 : 1; - printk("KGDB: Using serial line /dev/ttyS%d for session\n", line); - - speed = 0; - if (*++argptr == ',') - { - int c; - while ((c = *++argptr) && ('0' <= c && c <= '9')) - speed = speed * 10 + c - '0'; - } - { - speed = rs_kgdb_hook(line, speed); - generic_putDebugChar = rs_putDebugChar; - generic_getDebugChar = rs_getDebugChar; - } - - pr_info("KGDB: Using serial line /dev/ttyS%d at %d for " - "session, please connect your debugger\n", - line ? 1 : 0, speed); - - { - char *s; - for (s = "Please connect GDB to this port\r\n"; *s; ) - generic_putDebugChar(*s++); - } - - /* Breakpoint is invoked after interrupts are initialised */ - } -} -#endif - -static void __init mips_nmi_setup(void) -{ - void *base; - extern char except_vec_nmi; - - base = cpu_has_veic ? - (void *)(CAC_BASE + 0xa80) : - (void *)(CAC_BASE + 0x380); - memcpy(base, &except_vec_nmi, 0x80); - flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); -} - -static void __init mips_ejtag_setup(void) -{ - void *base; - extern char except_vec_ejtag_debug; - - base = cpu_has_veic ? - (void *)(CAC_BASE + 0xa00) : - (void *)(CAC_BASE + 0x300); - memcpy(base, &except_vec_ejtag_debug, 0x80); - flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); -} - -extern struct plat_smp_ops msmtc_smp_ops; - -void __init prom_init(void) -{ - prom_argc = fw_arg0; - _prom_argv = (int *) fw_arg1; - _prom_envp = (int *) fw_arg2; - - mips_display_message("LINUX"); - - /* - * early setup of _pcictrl_bonito so that we can determine - * the system controller on a CORE_EMUL board - */ - _pcictrl_bonito = (unsigned long)ioremap(BONITO_REG_BASE, BONITO_REG_SIZE); - - mips_revision_corid = MIPS_REVISION_CORID; - - if (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL) { - if (BONITO_PCIDID == 0x0001df53 || - BONITO_PCIDID == 0x0003df53) - mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_BON; - else - mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_MSC; - } - - mips_revision_sconid = MIPS_REVISION_SCONID; - if (mips_revision_sconid == MIPS_REVISION_SCON_OTHER) { - switch (mips_revision_corid) { - case MIPS_REVISION_CORID_QED_RM5261: - case MIPS_REVISION_CORID_CORE_LV: - case MIPS_REVISION_CORID_CORE_FPGA: - case MIPS_REVISION_CORID_CORE_FPGAR2: - mips_revision_sconid = MIPS_REVISION_SCON_GT64120; - break; - case MIPS_REVISION_CORID_CORE_EMUL_BON: - case MIPS_REVISION_CORID_BONITO64: - case MIPS_REVISION_CORID_CORE_20K: - mips_revision_sconid = MIPS_REVISION_SCON_BONITO; - break; - case MIPS_REVISION_CORID_CORE_MSC: - case MIPS_REVISION_CORID_CORE_FPGA2: - case MIPS_REVISION_CORID_CORE_24K: - /* - * SOCit/ROCit support is essentially identical - * but make an attempt to distinguish them - */ - mips_revision_sconid = MIPS_REVISION_SCON_SOCIT; - break; - case MIPS_REVISION_CORID_CORE_FPGA3: - case MIPS_REVISION_CORID_CORE_FPGA4: - case MIPS_REVISION_CORID_CORE_FPGA5: - case MIPS_REVISION_CORID_CORE_EMUL_MSC: - default: - /* See above */ - mips_revision_sconid = MIPS_REVISION_SCON_ROCIT; - break; - } - } - - switch (mips_revision_sconid) { - u32 start, map, mask, data; - - case MIPS_REVISION_SCON_GT64120: - /* - * Setup the North bridge to do Master byte-lane swapping - * when running in bigendian. - */ - _pcictrl_gt64120 = (unsigned long)ioremap(MIPS_GT_BASE, 0x2000); - -#ifdef CONFIG_CPU_LITTLE_ENDIAN - GT_WRITE(GT_PCI0_CMD_OFS, GT_PCI0_CMD_MBYTESWAP_BIT | - GT_PCI0_CMD_SBYTESWAP_BIT); -#else - GT_WRITE(GT_PCI0_CMD_OFS, 0); -#endif - /* Fix up PCI I/O mapping if necessary (for Atlas). */ - start = GT_READ(GT_PCI0IOLD_OFS); - map = GT_READ(GT_PCI0IOREMAP_OFS); - if ((start & map) != 0) { - map &= ~start; - GT_WRITE(GT_PCI0IOREMAP_OFS, map); - } - - set_io_port_base(MALTA_GT_PORT_BASE); - break; - - case MIPS_REVISION_SCON_BONITO: - _pcictrl_bonito_pcicfg = (unsigned long)ioremap(BONITO_PCICFG_BASE, BONITO_PCICFG_SIZE); - - /* - * Disable Bonito IOBC. - */ - BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & - ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | - BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); - - /* - * Setup the North bridge to do Master byte-lane swapping - * when running in bigendian. - */ -#ifdef CONFIG_CPU_LITTLE_ENDIAN - BONITO_BONGENCFG = BONITO_BONGENCFG & - ~(BONITO_BONGENCFG_MSTRBYTESWAP | - BONITO_BONGENCFG_BYTESWAP); -#else - BONITO_BONGENCFG = BONITO_BONGENCFG | - BONITO_BONGENCFG_MSTRBYTESWAP | - BONITO_BONGENCFG_BYTESWAP; -#endif - - set_io_port_base(MALTA_BONITO_PORT_BASE); - break; - - case MIPS_REVISION_SCON_SOCIT: - case MIPS_REVISION_SCON_ROCIT: - _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000); - mips_pci_controller: - mb(); - MSC_READ(MSC01_PCI_CFG, data); - MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT); - wmb(); - - /* Fix up lane swapping. */ -#ifdef CONFIG_CPU_LITTLE_ENDIAN - MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP); -#else - MSC_WRITE(MSC01_PCI_SWAP, - MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_IO_SHF | - MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF | - MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF); -#endif - /* Fix up target memory mapping. */ - MSC_READ(MSC01_PCI_BAR0, mask); - MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK); - - /* Don't handle target retries indefinitely. */ - if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) == - MSC01_PCI_CFG_MAXRTRY_MSK) - data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK << - MSC01_PCI_CFG_MAXRTRY_SHF)) | - ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) << - MSC01_PCI_CFG_MAXRTRY_SHF); - - wmb(); - MSC_WRITE(MSC01_PCI_CFG, data); - mb(); - - set_io_port_base(MALTA_MSC_PORT_BASE); - break; - - case MIPS_REVISION_SCON_SOCITSC: - case MIPS_REVISION_SCON_SOCITSCP: - _pcictrl_msc = (unsigned long)ioremap(MIPS_SOCITSC_PCI_REG_BASE, 0x2000); - goto mips_pci_controller; - - default: - /* Unknown system controller */ - mips_display_message("SC Error"); - while (1); /* We die here... */ - } - board_nmi_handler_setup = mips_nmi_setup; - board_ejtag_handler_setup = mips_ejtag_setup; - - pr_info("\nLINUX started...\n"); - prom_init_cmdline(); - prom_meminit(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - console_config(); -#endif -#ifdef CONFIG_MIPS_CMP - register_smp_ops(&cmp_smp_ops); -#endif -#ifdef CONFIG_MIPS_MT_SMP - register_smp_ops(&vsmp_smp_ops); -#endif -#ifdef CONFIG_MIPS_MT_SMTC - register_smp_ops(&msmtc_smp_ops); -#endif -} diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c deleted file mode 100644 index 61888ff72c87..000000000000 --- a/arch/mips/mips-boards/generic/memory.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * PROM library functions for acquiring/using memory descriptors given to - * us from the YAMON. - */ -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -/*#define DEBUG*/ - -enum yamon_memtypes { - yamon_dontuse, - yamon_prom, - yamon_free, -}; -static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; - -#ifdef DEBUG -static char *mtypes[3] = { - "Dont use memory", - "YAMON PROM memory", - "Free memmory", -}; -#endif - -/* determined physical memory size, not overridden by command line args */ -unsigned long physical_memsize = 0L; - -static struct prom_pmemblock * __init prom_getmdesc(void) -{ - char *memsize_str; - unsigned int memsize; - char cmdline[CL_SIZE], *ptr; - - /* otherwise look in the environment */ - memsize_str = prom_getenv("memsize"); - if (!memsize_str) { - printk(KERN_WARNING - "memsize not set in boot prom, set to default (32Mb)\n"); - physical_memsize = 0x02000000; - } else { -#ifdef DEBUG - pr_debug("prom_memsize = %s\n", memsize_str); -#endif - physical_memsize = simple_strtol(memsize_str, NULL, 0); - } - -#ifdef CONFIG_CPU_BIG_ENDIAN - /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last - word of physical memory */ - physical_memsize -= PAGE_SIZE; -#endif - - /* Check the command line for a memsize directive that overrides - the physical/default amount */ - strcpy(cmdline, arcs_cmdline); - ptr = strstr(cmdline, "memsize="); - if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) - ptr = strstr(ptr, " memsize="); - - if (ptr) - memsize = memparse(ptr + 8, &ptr); - else - memsize = physical_memsize; - - memset(mdesc, 0, sizeof(mdesc)); - - mdesc[0].type = yamon_dontuse; - mdesc[0].base = 0x00000000; - mdesc[0].size = 0x00001000; - - mdesc[1].type = yamon_prom; - mdesc[1].base = 0x00001000; - mdesc[1].size = 0x000ef000; - - /* - * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the - * south bridge and PCI access always forwarded to the ISA Bus and - * BIOSCS# is always generated. - * This mean that this area can't be used as DMA memory for PCI - * devices. - */ - mdesc[2].type = yamon_dontuse; - mdesc[2].base = 0x000f0000; - mdesc[2].size = 0x00010000; - - mdesc[3].type = yamon_dontuse; - mdesc[3].base = 0x00100000; - mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - mdesc[3].base; - - mdesc[4].type = yamon_free; - mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end)); - mdesc[4].size = memsize - mdesc[4].base; - - return &mdesc[0]; -} - -static int __init prom_memtype_classify(unsigned int type) -{ - switch (type) { - case yamon_free: - return BOOT_MEM_RAM; - case yamon_prom: - return BOOT_MEM_ROM_DATA; - default: - return BOOT_MEM_RESERVED; - } -} - -void __init prom_meminit(void) -{ - struct prom_pmemblock *p; - -#ifdef DEBUG - pr_debug("YAMON MEMORY DESCRIPTOR dump:\n"); - p = prom_getmdesc(); - while (p->size) { - int i = 0; - pr_debug("[%d,%p]: base<%08lx> size<%08lx> type<%s>\n", - i, p, p->base, p->size, mtypes[p->type]); - p++; - i++; - } -#endif - p = prom_getmdesc(); - - while (p->size) { - long type; - unsigned long base, size; - - type = prom_memtype_classify(p->type); - base = p->base; - size = p->size; - - add_memory_region(base, size, type); - p++; - } -} - -void __init prom_free_prom_memory(void) -{ - unsigned long addr; - int i; - - for (i = 0; i < boot_mem_map.nr_map; i++) { - if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) - continue; - - addr = boot_mem_map.map[i].addr; - free_init_pages("prom memory", - addr, addr + boot_mem_map.map[i].size); - } -} diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c deleted file mode 100644 index b9743190609a..000000000000 --- a/arch/mips/mips-boards/generic/pci.c +++ /dev/null @@ -1,243 +0,0 @@ -/* - * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. - * All rights reserved. - * Authors: Carsten Langgaard - * Maciej W. Rozycki - * - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * MIPS boards specific PCI support. - */ -#include -#include -#include -#include - -#include - -#include -#include -#include - -static struct resource bonito64_mem_resource = { - .name = "Bonito PCI MEM", - .flags = IORESOURCE_MEM, -}; - -static struct resource bonito64_io_resource = { - .name = "Bonito PCI I/O", - .start = 0x00000000UL, - .end = 0x000fffffUL, - .flags = IORESOURCE_IO, -}; - -static struct resource gt64120_mem_resource = { - .name = "GT-64120 PCI MEM", - .flags = IORESOURCE_MEM, -}; - -static struct resource gt64120_io_resource = { - .name = "GT-64120 PCI I/O", - .flags = IORESOURCE_IO, -}; - -static struct resource msc_mem_resource = { - .name = "MSC PCI MEM", - .flags = IORESOURCE_MEM, -}; - -static struct resource msc_io_resource = { - .name = "MSC PCI I/O", - .flags = IORESOURCE_IO, -}; - -extern struct pci_ops bonito64_pci_ops; -extern struct pci_ops gt64xxx_pci0_ops; -extern struct pci_ops msc_pci_ops; - -static struct pci_controller bonito64_controller = { - .pci_ops = &bonito64_pci_ops, - .io_resource = &bonito64_io_resource, - .mem_resource = &bonito64_mem_resource, - .io_offset = 0x00000000UL, -}; - -static struct pci_controller gt64120_controller = { - .pci_ops = >64xxx_pci0_ops, - .io_resource = >64120_io_resource, - .mem_resource = >64120_mem_resource, -}; - -static struct pci_controller msc_controller = { - .pci_ops = &msc_pci_ops, - .io_resource = &msc_io_resource, - .mem_resource = &msc_mem_resource, -}; - -void __init mips_pcibios_init(void) -{ - struct pci_controller *controller; - resource_size_t start, end, map, start1, end1, map1, map2, map3, mask; - - switch (mips_revision_sconid) { - case MIPS_REVISION_SCON_GT64120: - /* - * Due to a bug in the Galileo system controller, we need - * to setup the PCI BAR for the Galileo internal registers. - * This should be done in the bios/bootprom and will be - * fixed in a later revision of YAMON (the MIPS boards - * boot prom). - */ - GT_WRITE(GT_PCI0_CFGADDR_OFS, - (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | /* Local bus */ - (0 << GT_PCI0_CFGADDR_DEVNUM_SHF) | /* GT64120 dev */ - (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | /* Function 0*/ - ((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) | /* BAR 4*/ - GT_PCI0_CFGADDR_CONFIGEN_BIT); - - /* Perform the write */ - GT_WRITE(GT_PCI0_CFGDATA_OFS, CPHYSADDR(MIPS_GT_BASE)); - - /* Set up resource ranges from the controller's registers. */ - start = GT_READ(GT_PCI0M0LD_OFS); - end = GT_READ(GT_PCI0M0HD_OFS); - map = GT_READ(GT_PCI0M0REMAP_OFS); - end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK); - start1 = GT_READ(GT_PCI0M1LD_OFS); - end1 = GT_READ(GT_PCI0M1HD_OFS); - map1 = GT_READ(GT_PCI0M1REMAP_OFS); - end1 = (end1 & GT_PCI_HD_MSK) | (start1 & ~GT_PCI_HD_MSK); - /* Cannot support multiple windows, use the wider. */ - if (end1 - start1 > end - start) { - start = start1; - end = end1; - map = map1; - } - mask = ~(start ^ end); - /* We don't support remapping with a discontiguous mask. */ - BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && - mask != ~((mask & -mask) - 1)); - gt64120_mem_resource.start = start; - gt64120_mem_resource.end = end; - gt64120_controller.mem_offset = (start & mask) - (map & mask); - /* Addresses are 36-bit, so do shifts in the destinations. */ - gt64120_mem_resource.start <<= GT_PCI_DCRM_SHF; - gt64120_mem_resource.end <<= GT_PCI_DCRM_SHF; - gt64120_mem_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1; - gt64120_controller.mem_offset <<= GT_PCI_DCRM_SHF; - - start = GT_READ(GT_PCI0IOLD_OFS); - end = GT_READ(GT_PCI0IOHD_OFS); - map = GT_READ(GT_PCI0IOREMAP_OFS); - end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK); - mask = ~(start ^ end); - /* We don't support remapping with a discontiguous mask. */ - BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && - mask != ~((mask & -mask) - 1)); - gt64120_io_resource.start = map & mask; - gt64120_io_resource.end = (map & mask) | ~mask; - gt64120_controller.io_offset = 0; - /* Addresses are 36-bit, so do shifts in the destinations. */ - gt64120_io_resource.start <<= GT_PCI_DCRM_SHF; - gt64120_io_resource.end <<= GT_PCI_DCRM_SHF; - gt64120_io_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1; - - controller = >64120_controller; - break; - - case MIPS_REVISION_SCON_BONITO: - /* Set up resource ranges from the controller's registers. */ - map = BONITO_PCIMAP; - map1 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO0) >> - BONITO_PCIMAP_PCIMAP_LO0_SHIFT; - map2 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO1) >> - BONITO_PCIMAP_PCIMAP_LO1_SHIFT; - map3 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO2) >> - BONITO_PCIMAP_PCIMAP_LO2_SHIFT; - /* Combine as many adjacent windows as possible. */ - map = map1; - start = BONITO_PCILO0_BASE; - end = 1; - if (map3 == map2 + 1) { - map = map2; - start = BONITO_PCILO1_BASE; - end++; - } - if (map2 == map1 + 1) { - map = map1; - start = BONITO_PCILO0_BASE; - end++; - } - bonito64_mem_resource.start = start; - bonito64_mem_resource.end = start + - BONITO_PCIMAP_WINBASE(end) - 1; - bonito64_controller.mem_offset = start - - BONITO_PCIMAP_WINBASE(map); - - controller = &bonito64_controller; - break; - - case MIPS_REVISION_SCON_SOCIT: - case MIPS_REVISION_SCON_ROCIT: - case MIPS_REVISION_SCON_SOCITSC: - case MIPS_REVISION_SCON_SOCITSCP: - /* Set up resource ranges from the controller's registers. */ - MSC_READ(MSC01_PCI_SC2PMBASL, start); - MSC_READ(MSC01_PCI_SC2PMMSKL, mask); - MSC_READ(MSC01_PCI_SC2PMMAPL, map); - msc_mem_resource.start = start & mask; - msc_mem_resource.end = (start & mask) | ~mask; - msc_controller.mem_offset = (start & mask) - (map & mask); - - MSC_READ(MSC01_PCI_SC2PIOBASL, start); - MSC_READ(MSC01_PCI_SC2PIOMSKL, mask); - MSC_READ(MSC01_PCI_SC2PIOMAPL, map); - msc_io_resource.start = map & mask; - msc_io_resource.end = (map & mask) | ~mask; - msc_controller.io_offset = 0; - ioport_resource.end = ~mask; - - /* If ranges overlap I/O takes precedence. */ - start = start & mask; - end = start | ~mask; - if ((start >= msc_mem_resource.start && - start <= msc_mem_resource.end) || - (end >= msc_mem_resource.start && - end <= msc_mem_resource.end)) { - /* Use the larger space. */ - start = max(start, msc_mem_resource.start); - end = min(end, msc_mem_resource.end); - if (start - msc_mem_resource.start >= - msc_mem_resource.end - end) - msc_mem_resource.end = start - 1; - else - msc_mem_resource.start = end + 1; - } - - controller = &msc_controller; - break; - default: - return; - } - - if (controller->io_resource->start < 0x00001000UL) /* FIXME */ - controller->io_resource->start = 0x00001000UL; - - iomem_resource.end &= 0xfffffffffULL; /* 64 GB */ - ioport_resource.end = controller->io_resource->end; - - register_pci_controller(controller); -} diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c deleted file mode 100644 index 42dee4da37ba..000000000000 --- a/arch/mips/mips-boards/generic/reset.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Reset the MIPS boards. - * - */ -#include - -#include -#include -#include - -static void mips_machine_restart(char *command); -static void mips_machine_halt(void); - -static void mips_machine_restart(char *command) -{ - unsigned int __iomem *softres_reg = - ioremap(SOFTRES_REG, sizeof(unsigned int)); - - __raw_writel(GORESET, softres_reg); -} - -static void mips_machine_halt(void) -{ - unsigned int __iomem *softres_reg = - ioremap(SOFTRES_REG, sizeof(unsigned int)); - - __raw_writel(GORESET, softres_reg); -} - - -void mips_reboot_setup(void) -{ - _machine_restart = mips_machine_restart; - _machine_halt = mips_machine_halt; - pm_power_off = mips_machine_halt; -} diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c deleted file mode 100644 index 0b97d47691fc..000000000000 --- a/arch/mips/mips-boards/generic/time.c +++ /dev/null @@ -1,163 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Setting up the clock on the MIPS boards. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -unsigned long cpu_khz; - -static int mips_cpu_timer_irq; -static int mips_cpu_perf_irq; -extern int cp0_perfcount_irq; - -static void mips_timer_dispatch(void) -{ - do_IRQ(mips_cpu_timer_irq); -} - -static void mips_perf_dispatch(void) -{ - do_IRQ(mips_cpu_perf_irq); -} - -/* - * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect - */ -static unsigned int __init estimate_cpu_frequency(void) -{ - unsigned int prid = read_c0_prid() & 0xffff00; - unsigned int count; - - unsigned long flags; - unsigned int start; - - local_irq_save(flags); - - /* Start counter exactly on falling edge of update flag */ - while (CMOS_READ(RTC_REG_A) & RTC_UIP); - while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - - /* Start r4k counter. */ - start = read_c0_count(); - - /* Read counter exactly on falling edge of update flag */ - while (CMOS_READ(RTC_REG_A) & RTC_UIP); - while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - - count = read_c0_count() - start; - - /* restore interrupts */ - local_irq_restore(flags); - - mips_hpt_frequency = count; - if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && - (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) - count *= 2; - - count += 5000; /* round */ - count -= count%10000; - - return count; -} - -unsigned long read_persistent_clock(void) -{ - return mc146818_get_cmos_time(); -} - -static void __init plat_perf_setup(void) -{ -#ifdef MSC01E_INT_BASE - if (cpu_has_veic) { - set_vi_handler(MSC01E_INT_PERFCTR, mips_perf_dispatch); - mips_cpu_perf_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR; - } else -#endif - if (cp0_perfcount_irq >= 0) { - if (cpu_has_vint) - set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch); - mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq; -#ifdef CONFIG_SMP - set_irq_handler(mips_cpu_perf_irq, handle_percpu_irq); -#endif - } -} - -unsigned int __cpuinit get_c0_compare_int(void) -{ -#ifdef MSC01E_INT_BASE - if (cpu_has_veic) { - set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch); - mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR; - } else -#endif - { - if (cpu_has_vint) - set_vi_handler(cp0_compare_irq, mips_timer_dispatch); - mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; - } - - return mips_cpu_timer_irq; -} - -void __init plat_time_init(void) -{ - unsigned int est_freq; - - /* Set Data mode - binary. */ - CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); - - est_freq = estimate_cpu_frequency(); - - printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, - (est_freq%1000000)*100/1000000); - - cpu_khz = est_freq / 1000; - - mips_scroll_message(); -#ifdef CONFIG_I8253 /* Only Malta has a PIT */ - setup_pit_timer(); -#endif - - plat_perf_setup(); -} diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile deleted file mode 100644 index db4ad654a6d3..000000000000 --- a/arch/mips/mips-boards/malta/Makefile +++ /dev/null @@ -1,27 +0,0 @@ -# -# Carsten Langgaard, carstenl@mips.com -# Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# Makefile for the MIPS Malta specific kernel interface routines -# under Linux. -# - -obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o - -# FIXME FIXME FIXME -obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c deleted file mode 100644 index ea176113fea9..000000000000 --- a/arch/mips/mips-boards/malta/malta_int.c +++ /dev/null @@ -1,712 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. - * Copyright (C) 2001 Ralf Baechle - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Routines for generic manipulation of the interrupts found on the MIPS - * Malta board. - * The interrupt controller is located in the South Bridge a PIIX4 device - * with two internal 82C95 interrupt controllers. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -int gcmp_present = -1; -int gic_present; -static unsigned long _msc01_biu_base; -static unsigned long _gcmp_base; -static unsigned int ipi_map[NR_CPUS]; - -static DEFINE_SPINLOCK(mips_irq_lock); - -static inline int mips_pcibios_iack(void) -{ - int irq; - u32 dummy; - - /* - * Determine highest priority pending interrupt by performing - * a PCI Interrupt Acknowledge cycle. - */ - switch (mips_revision_sconid) { - case MIPS_REVISION_SCON_SOCIT: - case MIPS_REVISION_SCON_ROCIT: - case MIPS_REVISION_SCON_SOCITSC: - case MIPS_REVISION_SCON_SOCITSCP: - MSC_READ(MSC01_PCI_IACK, irq); - irq &= 0xff; - break; - case MIPS_REVISION_SCON_GT64120: - irq = GT_READ(GT_PCI0_IACK_OFS); - irq &= 0xff; - break; - case MIPS_REVISION_SCON_BONITO: - /* The following will generate a PCI IACK cycle on the - * Bonito controller. It's a little bit kludgy, but it - * was the easiest way to implement it in hardware at - * the given time. - */ - BONITO_PCIMAP_CFG = 0x20000; - - /* Flush Bonito register block */ - dummy = BONITO_PCIMAP_CFG; - iob(); /* sync */ - - irq = readl((u32 *)_pcictrl_bonito_pcicfg); - iob(); /* sync */ - irq &= 0xff; - BONITO_PCIMAP_CFG = 0; - break; - default: - printk(KERN_WARNING "Unknown system controller.\n"); - return -1; - } - return irq; -} - -static inline int get_int(void) -{ - unsigned long flags; - int irq; - spin_lock_irqsave(&mips_irq_lock, flags); - - irq = mips_pcibios_iack(); - - /* - * The only way we can decide if an interrupt is spurious - * is by checking the 8259 registers. This needs a spinlock - * on an SMP system, so leave it up to the generic code... - */ - - spin_unlock_irqrestore(&mips_irq_lock, flags); - - return irq; -} - -static void malta_hw0_irqdispatch(void) -{ - int irq; - - irq = get_int(); - if (irq < 0) { - /* interrupt has already been cleared */ - return; - } - - do_IRQ(MALTA_INT_BASE + irq); -} - -static void malta_ipi_irqdispatch(void) -{ - int irq; - - irq = gic_get_int(); - if (irq < 0) - return; /* interrupt has already been cleared */ - - do_IRQ(MIPS_GIC_IRQ_BASE + irq); -} - -static void corehi_irqdispatch(void) -{ - unsigned int intedge, intsteer, pcicmd, pcibadaddr; - unsigned int pcimstat, intisr, inten, intpol; - unsigned int intrcause, datalo, datahi; - struct pt_regs *regs = get_irq_regs(); - - printk(KERN_EMERG "CoreHI interrupt, shouldn't happen, we die here!\n"); - printk(KERN_EMERG "epc : %08lx\nStatus: %08lx\n" - "Cause : %08lx\nbadVaddr : %08lx\n", - regs->cp0_epc, regs->cp0_status, - regs->cp0_cause, regs->cp0_badvaddr); - - /* Read all the registers and then print them as there is a - problem with interspersed printk's upsetting the Bonito controller. - Do it for the others too. - */ - - switch (mips_revision_sconid) { - case MIPS_REVISION_SCON_SOCIT: - case MIPS_REVISION_SCON_ROCIT: - case MIPS_REVISION_SCON_SOCITSC: - case MIPS_REVISION_SCON_SOCITSCP: - ll_msc_irq(); - break; - case MIPS_REVISION_SCON_GT64120: - intrcause = GT_READ(GT_INTRCAUSE_OFS); - datalo = GT_READ(GT_CPUERR_ADDRLO_OFS); - datahi = GT_READ(GT_CPUERR_ADDRHI_OFS); - printk(KERN_EMERG "GT_INTRCAUSE = %08x\n", intrcause); - printk(KERN_EMERG "GT_CPUERR_ADDR = %02x%08x\n", - datahi, datalo); - break; - case MIPS_REVISION_SCON_BONITO: - pcibadaddr = BONITO_PCIBADADDR; - pcimstat = BONITO_PCIMSTAT; - intisr = BONITO_INTISR; - inten = BONITO_INTEN; - intpol = BONITO_INTPOL; - intedge = BONITO_INTEDGE; - intsteer = BONITO_INTSTEER; - pcicmd = BONITO_PCICMD; - printk(KERN_EMERG "BONITO_INTISR = %08x\n", intisr); - printk(KERN_EMERG "BONITO_INTEN = %08x\n", inten); - printk(KERN_EMERG "BONITO_INTPOL = %08x\n", intpol); - printk(KERN_EMERG "BONITO_INTEDGE = %08x\n", intedge); - printk(KERN_EMERG "BONITO_INTSTEER = %08x\n", intsteer); - printk(KERN_EMERG "BONITO_PCICMD = %08x\n", pcicmd); - printk(KERN_EMERG "BONITO_PCIBADADDR = %08x\n", pcibadaddr); - printk(KERN_EMERG "BONITO_PCIMSTAT = %08x\n", pcimstat); - break; - } - - die("CoreHi interrupt", regs); -} - -static inline int clz(unsigned long x) -{ - __asm__( - " .set push \n" - " .set mips32 \n" - " clz %0, %1 \n" - " .set pop \n" - : "=r" (x) - : "r" (x)); - - return x; -} - -/* - * Version of ffs that only looks at bits 12..15. - */ -static inline unsigned int irq_ffs(unsigned int pending) -{ -#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) - return -clz(pending) + 31 - CAUSEB_IP; -#else - unsigned int a0 = 7; - unsigned int t0; - - t0 = pending & 0xf000; - t0 = t0 < 1; - t0 = t0 << 2; - a0 = a0 - t0; - pending = pending << t0; - - t0 = pending & 0xc000; - t0 = t0 < 1; - t0 = t0 << 1; - a0 = a0 - t0; - pending = pending << t0; - - t0 = pending & 0x8000; - t0 = t0 < 1; - /* t0 = t0 << 2; */ - a0 = a0 - t0; - /* pending = pending << t0; */ - - return a0; -#endif -} - -/* - * IRQs on the Malta board look basically (barring software IRQs which we - * don't use at all and all external interrupt sources are combined together - * on hardware interrupt 0 (MIPS IRQ 2)) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Combined hardware interrupt (hw0) - * 3 Hardware (ignored) - * 4 Hardware (ignored) - * 5 Hardware (ignored) - * 6 Hardware (ignored) - * 7 R4k timer (what we use) - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Lowest ---- Combined hardware interrupt - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; - int irq; - - irq = irq_ffs(pending); - - if (irq == MIPSCPU_INT_I8259A) - malta_hw0_irqdispatch(); - else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()])) - malta_ipi_irqdispatch(); - else if (irq >= 0) - do_IRQ(MIPS_CPU_IRQ_BASE + irq); - else - spurious_interrupt(); -} - -#ifdef CONFIG_MIPS_MT_SMP - - -#define GIC_MIPS_CPU_IPI_RESCHED_IRQ 3 -#define GIC_MIPS_CPU_IPI_CALL_IRQ 4 - -#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */ -#define C_RESCHED C_SW0 -#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for resched */ -#define C_CALL C_SW1 -static int cpu_ipi_resched_irq, cpu_ipi_call_irq; - -static void ipi_resched_dispatch(void) -{ - do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ); -} - -static void ipi_call_dispatch(void) -{ - do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ); -} - -static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) -{ - return IRQ_HANDLED; -} - -static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) -{ - smp_call_function_interrupt(); - - return IRQ_HANDLED; -} - -static struct irqaction irq_resched = { - .handler = ipi_resched_interrupt, - .flags = IRQF_DISABLED|IRQF_PERCPU, - .name = "IPI_resched" -}; - -static struct irqaction irq_call = { - .handler = ipi_call_interrupt, - .flags = IRQF_DISABLED|IRQF_PERCPU, - .name = "IPI_call" -}; -#endif /* CONFIG_MIPS_MT_SMP */ - -static struct irqaction i8259irq = { - .handler = no_action, - .name = "XT-PIC cascade" -}; - -static struct irqaction corehi_irqaction = { - .handler = no_action, - .name = "CoreHi" -}; - -static msc_irqmap_t __initdata msc_irqmap[] = { - {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0}, - {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0}, -}; -static int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap); - -static msc_irqmap_t __initdata msc_eicirqmap[] = { - {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_I8259A, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_SMI, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_COREHI, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_CORELO, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0}, - {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, - {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} -}; - -static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); - -#if defined(CONFIG_MIPS_MT_SMP) -/* - * This GIC specific tabular array defines the association between External - * Interrupts and CPUs/Core Interrupts. The nature of the External - * Interrupts is also defined here - polarity/trigger. - */ -static struct gic_intr_map gic_intr_map[] = { - { GIC_EXT_INTR(0), X, X, X, X, 0 }, - { GIC_EXT_INTR(1), X, X, X, X, 0 }, - { GIC_EXT_INTR(2), X, X, X, X, 0 }, - { GIC_EXT_INTR(3), 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(4), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(5), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(6), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(7), 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(8), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(9), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(10), X, X, X, X, 0 }, - { GIC_EXT_INTR(11), X, X, X, X, 0 }, - { GIC_EXT_INTR(12), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(15), X, X, X, X, 0 }, - { GIC_EXT_INTR(16), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(17), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(18), 1, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(19), 1, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(20), 2, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(21), 2, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(22), 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, - { GIC_EXT_INTR(23), 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, -}; -#endif - -/* - * GCMP needs to be detected before any SMP initialisation - */ -static int __init gcmp_probe(unsigned long addr, unsigned long size) -{ - if (gcmp_present >= 0) - return gcmp_present; - - _gcmp_base = (unsigned long) ioremap_nocache(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); - _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ); - gcmp_present = (GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) == GCMP_BASE_ADDR; - - if (gcmp_present) - printk(KERN_DEBUG "GCMP present\n"); - return gcmp_present; -} - -#if defined(CONFIG_MIPS_MT_SMP) -static void __init fill_ipi_map(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) { - if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X)) - ipi_map[gic_intr_map[i].cpunum] |= - (1 << (gic_intr_map[i].pin + 2)); - } -} -#endif - -void __init arch_init_irq(void) -{ - int gic_present, gcmp_present; - - init_i8259_irqs(); - - if (!cpu_has_veic) - mips_cpu_irq_init(); - - gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); - if (gcmp_present) { - GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK; - gic_present = 1; - } else { - _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ); - gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) & - MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF; - } - if (gic_present) - printk(KERN_DEBUG "GIC present\n"); - - switch (mips_revision_sconid) { - case MIPS_REVISION_SCON_SOCIT: - case MIPS_REVISION_SCON_ROCIT: - if (cpu_has_veic) - init_msc_irqs(MIPS_MSC01_IC_REG_BASE, - MSC01E_INT_BASE, msc_eicirqmap, - msc_nr_eicirqs); - else - init_msc_irqs(MIPS_MSC01_IC_REG_BASE, - MSC01C_INT_BASE, msc_irqmap, - msc_nr_irqs); - break; - - case MIPS_REVISION_SCON_SOCITSC: - case MIPS_REVISION_SCON_SOCITSCP: - if (cpu_has_veic) - init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, - MSC01E_INT_BASE, msc_eicirqmap, - msc_nr_eicirqs); - else - init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, - MSC01C_INT_BASE, msc_irqmap, - msc_nr_irqs); - } - - if (cpu_has_veic) { - set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch); - set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch); - setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq); - setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction); - } else if (cpu_has_vint) { - set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch); - set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch); -#ifdef CONFIG_MIPS_MT_SMTC - setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq, - (0x100 << MIPSCPU_INT_I8259A)); - setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, - &corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI)); - /* - * Temporary hack to ensure that the subsidiary device - * interrupts coing in via the i8259A, but associated - * with low IRQ numbers, will restore the Status.IM - * value associated with the i8259A. - */ - { - int i; - - for (i = 0; i < 16; i++) - irq_hwmask[i] = (0x100 << MIPSCPU_INT_I8259A); - } -#else /* Not SMTC */ - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, - &corehi_irqaction); -#endif /* CONFIG_MIPS_MT_SMTC */ - } else { - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); - setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, - &corehi_irqaction); - } - -#if defined(CONFIG_MIPS_MT_SMP) - if (gic_present) { - /* FIXME */ - int i; - struct { - unsigned int resched; - unsigned int call; - } ipiirq[] = { - { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE0, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE0}, - { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE1, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE1 - }, { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE2, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE2 - }, { - .resched = GIC_IPI_EXT_INTR_RESCHED_VPE3, - .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3 - } - }; - fill_ipi_map(); - gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); - if (!gcmp_present) { - /* Enable the GIC */ - i = REG(_msc01_biu_base, MSC01_SC_CFG); - REG(_msc01_biu_base, MSC01_SC_CFG) = - (i | (0x1 << MSC01_SC_CFG_GICENA_SHF)); - pr_debug("GIC Enabled\n"); - } - - /* set up ipi interrupts */ - if (cpu_has_vint) { - set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch); - set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch); - } - /* Argh.. this really needs sorting out.. */ - printk("CPU%d: status register was %08x\n", smp_processor_id(), read_c0_status()); - write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4); - printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status()); - write_c0_status(0x1100dc00); - printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); - for (i = 0; i < ARRAY_SIZE(ipiirq); i++) { - setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched); - setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call); - - set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq); - set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq); - } - } else { - /* set up ipi interrupts */ - if (cpu_has_veic) { - set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch); - set_vi_handler (MSC01E_INT_SW1, ipi_call_dispatch); - cpu_ipi_resched_irq = MSC01E_INT_SW0; - cpu_ipi_call_irq = MSC01E_INT_SW1; - } else { - if (cpu_has_vint) { - set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); - set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); - } - cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ; - cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ; - } - - setup_irq(cpu_ipi_resched_irq, &irq_resched); - setup_irq(cpu_ipi_call_irq, &irq_call); - - set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq); - set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq); - } -#endif -} - -void malta_be_init(void) -{ - if (gcmp_present) { - /* Could change CM error mask register */ - } -} - - -static char *tr[8] = { - "mem", "gcr", "gic", "mmio", - "0x04", "0x05", "0x06", "0x07" -}; - -static char *mcmd[32] = { - [0x00] = "0x00", - [0x01] = "Legacy Write", - [0x02] = "Legacy Read", - [0x03] = "0x03", - [0x04] = "0x04", - [0x05] = "0x05", - [0x06] = "0x06", - [0x07] = "0x07", - [0x08] = "Coherent Read Own", - [0x09] = "Coherent Read Share", - [0x0a] = "Coherent Read Discard", - [0x0b] = "Coherent Ready Share Always", - [0x0c] = "Coherent Upgrade", - [0x0d] = "Coherent Writeback", - [0x0e] = "0x0e", - [0x0f] = "0x0f", - [0x10] = "Coherent Copyback", - [0x11] = "Coherent Copyback Invalidate", - [0x12] = "Coherent Invalidate", - [0x13] = "Coherent Write Invalidate", - [0x14] = "Coherent Completion Sync", - [0x15] = "0x15", - [0x16] = "0x16", - [0x17] = "0x17", - [0x18] = "0x18", - [0x19] = "0x19", - [0x1a] = "0x1a", - [0x1b] = "0x1b", - [0x1c] = "0x1c", - [0x1d] = "0x1d", - [0x1e] = "0x1e", - [0x1f] = "0x1f" -}; - -static char *core[8] = { - "Invalid/OK", "Invalid/Data", - "Shared/OK", "Shared/Data", - "Modified/OK", "Modified/Data", - "Exclusive/OK", "Exclusive/Data" -}; - -static char *causes[32] = { - "None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR", - "COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07", - "0x08", "0x09", "0x0a", "0x0b", - "0x0c", "0x0d", "0x0e", "0x0f", - "0x10", "0x11", "0x12", "0x13", - "0x14", "0x15", "0x16", "INTVN_WR_ERR", - "INTVN_RD_ERR", "0x19", "0x1a", "0x1b", - "0x1c", "0x1d", "0x1e", "0x1f" -}; - -int malta_be_handler(struct pt_regs *regs, int is_fixup) -{ - /* This duplicates the handling in do_be which seems wrong */ - int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL; - - if (gcmp_present) { - unsigned long cm_error = GCMPGCB(GCMEC); - unsigned long cm_addr = GCMPGCB(GCMEA); - unsigned long cm_other = GCMPGCB(GCMEO); - unsigned long cause, ocause; - char buf[256]; - - cause = (cm_error & GCMP_GCB_GMEC_ERROR_TYPE_MSK); - if (cause != 0) { - cause >>= GCMP_GCB_GMEC_ERROR_TYPE_SHF; - if (cause < 16) { - unsigned long cca_bits = (cm_error >> 15) & 7; - unsigned long tr_bits = (cm_error >> 12) & 7; - unsigned long mcmd_bits = (cm_error >> 7) & 0x1f; - unsigned long stag_bits = (cm_error >> 3) & 15; - unsigned long sport_bits = (cm_error >> 0) & 7; - - snprintf(buf, sizeof(buf), - "CCA=%lu TR=%s MCmd=%s STag=%lu " - "SPort=%lu\n", - cca_bits, tr[tr_bits], mcmd[mcmd_bits], - stag_bits, sport_bits); - } else { - /* glob state & sresp together */ - unsigned long c3_bits = (cm_error >> 18) & 7; - unsigned long c2_bits = (cm_error >> 15) & 7; - unsigned long c1_bits = (cm_error >> 12) & 7; - unsigned long c0_bits = (cm_error >> 9) & 7; - unsigned long sc_bit = (cm_error >> 8) & 1; - unsigned long mcmd_bits = (cm_error >> 3) & 0x1f; - unsigned long sport_bits = (cm_error >> 0) & 7; - snprintf(buf, sizeof(buf), - "C3=%s C2=%s C1=%s C0=%s SC=%s " - "MCmd=%s SPort=%lu\n", - core[c3_bits], core[c2_bits], - core[c1_bits], core[c0_bits], - sc_bit ? "True" : "False", - mcmd[mcmd_bits], sport_bits); - } - - ocause = (cm_other & GCMP_GCB_GMEO_ERROR_2ND_MSK) >> - GCMP_GCB_GMEO_ERROR_2ND_SHF; - - printk("CM_ERROR=%08lx %s <%s>\n", cm_error, - causes[cause], buf); - printk("CM_ADDR =%08lx\n", cm_addr); - printk("CM_OTHER=%08lx %s\n", cm_other, causes[ocause]); - - /* reprime cause register */ - GCMPGCB(GCMEC) = 0; - } - } - - return retval; -} diff --git a/arch/mips/mips-boards/malta/malta_mtd.c b/arch/mips/mips-boards/malta/malta_mtd.c deleted file mode 100644 index 8ad9bdf25dce..000000000000 --- a/arch/mips/mips-boards/malta/malta_mtd.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 MIPS Technologies, Inc. - * written by Ralf Baechle - */ - -#include -#include -#include -#include -#include - -static struct mtd_partition malta_mtd_partitions[] = { - { - .name = "YAMON", - .offset = 0x0, - .size = 0x100000, - .mask_flags = MTD_WRITEABLE - }, { - .name = "User FS", - .offset = 0x100000, - .size = 0x2e0000 - }, { - .name = "Board Config", - .offset = 0x3e0000, - .size = 0x020000, - .mask_flags = MTD_WRITEABLE - } -}; - -static struct physmap_flash_data malta_flash_data = { - .width = 4, - .nr_parts = ARRAY_SIZE(malta_mtd_partitions), - .parts = malta_mtd_partitions -}; - -static struct resource malta_flash_resource = { - .start = 0x1e000000, - .end = 0x1e3fffff, - .flags = IORESOURCE_MEM -}; - -static struct platform_device malta_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &malta_flash_data, - }, - .num_resources = 1, - .resource = &malta_flash_resource, -}; - -static int __init malta_mtd_init(void) -{ - platform_device_register(&malta_flash); - - return 0; -} - -module_init(malta_mtd_init) diff --git a/arch/mips/mips-boards/malta/malta_platform.c b/arch/mips/mips-boards/malta/malta_platform.c deleted file mode 100644 index 83b9bab3cd3f..000000000000 --- a/arch/mips/mips-boards/malta/malta_platform.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 MIPS Technologies, Inc. - * written by Ralf Baechle (ralf@linux-mips.org) - * - * Probe driver for the Malta's UART ports: - * - * o 2 ports in the SMC SuperIO - * o 1 port in the CBUS UART, a discrete 16550 which normally is only used - * for bringups. - * - * We don't use 8250_platform.c on Malta as it would result in the CBUS - * UART becoming ttyS0. - */ -#include -#include -#include - -#define SMC_PORT(base, int) \ -{ \ - .iobase = base, \ - .irq = int, \ - .uartclk = 1843200, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -#define CBUS_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) - -static struct plat_serial8250_port uart8250_data[] = { - SMC_PORT(0x3F8, 4), - SMC_PORT(0x2F8, 3), - { - .mapbase = 0x1f000900, /* The CBUS UART */ - .irq = MIPS_CPU_IRQ_BASE + 2, - .uartclk = 3686400, /* Twice the usual clk! */ - .iotype = UPIO_MEM32, - .flags = CBUS_UART_FLAGS, - .regshift = 3, - }, - { }, -}; - -static struct platform_device uart8250_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM2, - .dev = { - .platform_data = uart8250_data, - }, -}; - -static int __init uart8250_init(void) -{ - return platform_device_register(&uart8250_device); -} - -module_init(uart8250_init); - -MODULE_AUTHOR("Ralf Baechle "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("8250 UART probe driver for the Malta CBUS UART"); diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c deleted file mode 100644 index e7cad54936ca..000000000000 --- a/arch/mips/mips-boards/malta/malta_setup.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * Copyright (C) 2008 Dmitri Vorobiev - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_VT -#include -#endif - -extern void malta_be_init(void); -extern int malta_be_handler(struct pt_regs *regs, int is_fixup); - -static struct resource standard_io_resources[] = { - { - .name = "dma1", - .start = 0x00, - .end = 0x1f, - .flags = IORESOURCE_BUSY - }, - { - .name = "timer", - .start = 0x40, - .end = 0x5f, - .flags = IORESOURCE_BUSY - }, - { - .name = "keyboard", - .start = 0x60, - .end = 0x6f, - .flags = IORESOURCE_BUSY - }, - { - .name = "dma page reg", - .start = 0x80, - .end = 0x8f, - .flags = IORESOURCE_BUSY - }, - { - .name = "dma2", - .start = 0xc0, - .end = 0xdf, - .flags = IORESOURCE_BUSY - }, -}; - -const char *get_system_type(void) -{ - return "MIPS Malta"; -} - -#if defined(CONFIG_MIPS_MT_SMTC) -const char display_string[] = " SMTC LINUX ON MALTA "; -#else -const char display_string[] = " LINUX ON MALTA "; -#endif /* CONFIG_MIPS_MT_SMTC */ - -#ifdef CONFIG_BLK_DEV_FD -static void __init fd_activate(void) -{ - /* - * Activate Floppy Controller in the SMSC FDC37M817 Super I/O - * Controller. - * Done by YAMON 2.00 onwards - */ - /* Entering config state. */ - SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG); - - /* Activate floppy controller. */ - SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG); - SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG); - SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG); - SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG); - - /* Exit config state. */ - SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG); -} -#endif - -#ifdef CONFIG_BLK_DEV_IDE -static void __init pci_clock_check(void) -{ - unsigned int __iomem *jmpr_p = - (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int)); - int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07; - static const int pciclocks[] __initdata = { - 33, 20, 25, 30, 12, 16, 37, 10 - }; - int pciclock = pciclocks[jmpr]; - char *argptr = prom_getcmdline(); - - if (pciclock != 33 && !strstr(argptr, "idebus=")) { - printk(KERN_WARNING "WARNING: PCI clock is %dMHz, " - "setting idebus\n", pciclock); - argptr += strlen(argptr); - sprintf(argptr, " idebus=%d", pciclock); - if (pciclock < 20 || pciclock > 66) - printk(KERN_WARNING "WARNING: IDE timing " - "calculations will be incorrect\n"); - } -} -#endif - -#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) -static void __init screen_info_setup(void) -{ - screen_info = (struct screen_info) { - .orig_x = 0, - .orig_y = 25, - .ext_mem_k = 0, - .orig_video_page = 0, - .orig_video_mode = 0, - .orig_video_cols = 80, - .unused2 = 0, - .orig_video_ega_bx = 0, - .unused3 = 0, - .orig_video_lines = 25, - .orig_video_isVGA = VIDEO_TYPE_VGAC, - .orig_video_points = 16 - }; -} -#endif - -static void __init bonito_quirks_setup(void) -{ - char *argptr; - - argptr = prom_getcmdline(); - if (strstr(argptr, "debug")) { - BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE; - printk(KERN_INFO "Enabled Bonito debug mode\n"); - } else - BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE; - -#ifdef CONFIG_DMA_COHERENT - if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) { - BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN; - printk(KERN_INFO "Enabled Bonito CPU coherency\n"); - - argptr = prom_getcmdline(); - if (strstr(argptr, "iobcuncached")) { - BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN; - BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & - ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | - BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); - printk(KERN_INFO "Disabled Bonito IOBC coherency\n"); - } else { - BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN; - BONITO_PCIMEMBASECFG |= - (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | - BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); - printk(KERN_INFO "Enabled Bonito IOBC coherency\n"); - } - } else - panic("Hardware DMA cache coherency not supported"); -#endif -} - -void __init plat_mem_setup(void) -{ - unsigned int i; - - mips_pcibios_init(); - - /* Request I/O space for devices used on the Malta board. */ - for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) - request_resource(&ioport_resource, standard_io_resources+i); - - /* - * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge. - */ - enable_dma(4); - -#ifdef CONFIG_KGDB - kgdb_config(); -#endif - -#ifdef CONFIG_DMA_COHERENT - if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO) - panic("Hardware DMA cache coherency not supported"); -#endif - - if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO) - bonito_quirks_setup(); - -#ifdef CONFIG_BLK_DEV_IDE - pci_clock_check(); -#endif - -#ifdef CONFIG_BLK_DEV_FD - fd_activate(); -#endif - -#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) - screen_info_setup(); -#endif - mips_reboot_setup(); - - board_be_init = malta_be_init; - board_be_handler = malta_be_handler; -} diff --git a/arch/mips/mips-boards/malta/malta_smtc.c b/arch/mips/mips-boards/malta/malta_smtc.c deleted file mode 100644 index 5ea705e49454..000000000000 --- a/arch/mips/mips-boards/malta/malta_smtc.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * Malta Platform-specific hooks for SMP operation - */ -#include -#include - -#include -#include -#include -#include - -/* VPE/SMP Prototype implements platform interfaces directly */ - -/* - * Cause the specified action to be performed on a targeted "CPU" - */ - -static void msmtc_send_ipi_single(int cpu, unsigned int action) -{ - /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ - smtc_send_ipi(cpu, LINUX_SMP_IPI, action); -} - -static void msmtc_send_ipi_mask(cpumask_t mask, unsigned int action) -{ - unsigned int i; - - for_each_cpu_mask(i, mask) - msmtc_send_ipi_single(i, action); -} - -/* - * Post-config but pre-boot cleanup entry point - */ -static void __cpuinit msmtc_init_secondary(void) -{ - void smtc_init_secondary(void); - int myvpe; - - /* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */ - myvpe = read_c0_tcbind() & TCBIND_CURVPE; - if (myvpe != 0) { - /* Ideally, this should be done only once per VPE, but... */ - clear_c0_status(ST0_IM); - set_c0_status((0x100 << cp0_compare_irq) - | (0x100 << MIPS_CPU_IPI_IRQ)); - if (cp0_perfcount_irq >= 0) - set_c0_status(0x100 << cp0_perfcount_irq); - } - - smtc_init_secondary(); -} - -/* - * Platform "CPU" startup hook - */ -static void __cpuinit msmtc_boot_secondary(int cpu, struct task_struct *idle) -{ - smtc_boot_secondary(cpu, idle); -} - -/* - * SMP initialization finalization entry point - */ -static void __cpuinit msmtc_smp_finish(void) -{ - smtc_smp_finish(); -} - -/* - * Hook for after all CPUs are online - */ - -static void msmtc_cpus_done(void) -{ -} - -/* - * Platform SMP pre-initialization - * - * As noted above, we can assume a single CPU for now - * but it may be multithreaded. - */ - -static void __init msmtc_smp_setup(void) -{ - mipsmt_build_cpu_map(0); -} - -static void __init msmtc_prepare_cpus(unsigned int max_cpus) -{ - mipsmt_prepare_cpus(); -} - -struct plat_smp_ops msmtc_smp_ops = { - .send_ipi_single = msmtc_send_ipi_single, - .send_ipi_mask = msmtc_send_ipi_mask, - .init_secondary = msmtc_init_secondary, - .smp_finish = msmtc_smp_finish, - .cpus_done = msmtc_cpus_done, - .boot_secondary = msmtc_boot_secondary, - .smp_setup = msmtc_smp_setup, - .prepare_cpus = msmtc_prepare_cpus, -}; - -#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF -/* - * IRQ affinity hook - */ - - -void plat_set_irq_affinity(unsigned int irq, cpumask_t affinity) -{ - cpumask_t tmask = affinity; - int cpu = 0; - void smtc_set_irq_affinity(unsigned int irq, cpumask_t aff); - - /* - * On the legacy Malta development board, all I/O interrupts - * are routed through the 8259 and combined in a single signal - * to the CPU daughterboard, and on the CoreFPGA2/3 34K models, - * that signal is brought to IP2 of both VPEs. To avoid racing - * concurrent interrupt service events, IP2 is enabled only on - * one VPE, by convention VPE0. So long as no bits are ever - * cleared in the affinity mask, there will never be any - * interrupt forwarding. But as soon as a program or operator - * sets affinity for one of the related IRQs, we need to make - * sure that we don't ever try to forward across the VPE boundry, - * at least not until we engineer a system where the interrupt - * _ack() or _end() function can somehow know that it corresponds - * to an interrupt taken on another VPE, and perform the appropriate - * restoration of Status.IM state using MFTR/MTTR instead of the - * normal local behavior. We also ensure that no attempt will - * be made to forward to an offline "CPU". - */ - - for_each_cpu_mask(cpu, affinity) { - if ((cpu_data[cpu].vpe_id != 0) || !cpu_online(cpu)) - cpu_clear(cpu, tmask); - } - irq_desc[irq].affinity = tmask; - - if (cpus_empty(tmask)) - /* - * We could restore a default mask here, but the - * runtime code can anyway deal with the null set - */ - printk(KERN_WARNING - "IRQ affinity leaves no legal CPU for IRQ %d\n", irq); - - /* Do any generic SMTC IRQ affinity setup */ - smtc_set_irq_affinity(irq, tmask); -} -#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile new file mode 100644 index 000000000000..f8064446e812 --- /dev/null +++ b/arch/mips/mti-malta/Makefile @@ -0,0 +1,21 @@ +# +# Carsten Langgaard, carstenl@mips.com +# Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. +# +# Copyright (C) 2008 Wind River Systems, Inc. +# written by Ralf Baechle +# +obj-y := malta-amon.o malta-cmdline.o \ + malta-display.o malta-init.o malta-int.o \ + malta-memory.o malta-mtd.o \ + malta-platform.o malta-reset.o \ + malta-setup.o malta-time.o + +obj-$(CONFIG_EARLY_PRINTK) += malta-console.o +obj-$(CONFIG_PCI) += malta-pci.o +obj-$(CONFIG_KGDB) += malta-kgdb.o + +# FIXME FIXME FIXME +obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/mti-malta/malta-amon.c b/arch/mips/mti-malta/malta-amon.c new file mode 100644 index 000000000000..96236bf33838 --- /dev/null +++ b/arch/mips/mti-malta/malta-amon.c @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2007 MIPS Technologies, Inc. + * All rights reserved. + + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Arbitrary Monitor interface + */ + +#include +#include +#include + +#include +#include +#include + +int amon_cpu_avail(int cpu) +{ + struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); + + if (cpu < 0 || cpu >= NCPULAUNCH) { + pr_debug("avail: cpu%d is out of range\n", cpu); + return 0; + } + + launch += cpu; + if (!(launch->flags & LAUNCH_FREADY)) { + pr_debug("avail: cpu%d is not ready\n", cpu); + return 0; + } + if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) { + pr_debug("avail: too late.. cpu%d is already gone\n", cpu); + return 0; + } + + return 1; +} + +void amon_cpu_start(int cpu, + unsigned long pc, unsigned long sp, + unsigned long gp, unsigned long a0) +{ + volatile struct cpulaunch *launch = + (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); + + if (!amon_cpu_avail(cpu)) + return; + if (cpu == smp_processor_id()) { + pr_debug("launch: I am cpu%d!\n", cpu); + return; + } + launch += cpu; + + pr_debug("launch: starting cpu%d\n", cpu); + + launch->pc = pc; + launch->gp = gp; + launch->sp = sp; + launch->a0 = a0; + + /* Make sure target sees parameters before the go bit */ + smp_mb(); + + launch->flags |= LAUNCH_FGO; + while ((launch->flags & LAUNCH_FGONE) == 0) + ; + pr_debug("launch: cpu%d gone!\n", cpu); +} diff --git a/arch/mips/mti-malta/malta-cmdline.c b/arch/mips/mti-malta/malta-cmdline.c new file mode 100644 index 000000000000..1871c30ed2eb --- /dev/null +++ b/arch/mips/mti-malta/malta-cmdline.c @@ -0,0 +1,59 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Kernel command line creation using the prom monitor (YAMON) argc/argv. + */ +#include +#include + +#include + +extern int prom_argc; +extern int *_prom_argv; + +/* + * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. + * This macro take care of sign extension. + */ +#define prom_argv(index) ((char *)(long)_prom_argv[(index)]) + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + + +void __init prom_init_cmdline(void) +{ + char *cp; + int actr; + + actr = 1; /* Always ignore argv[0] */ + + cp = &(arcs_cmdline[0]); + while(actr < prom_argc) { + strcpy(cp, prom_argv(actr)); + cp += strlen(prom_argv(actr)); + *cp++ = ' '; + actr++; + } + if (cp != &(arcs_cmdline[0])) { + /* get rid of trailing space */ + --cp; + *cp = '\0'; + } +} diff --git a/arch/mips/mti-malta/malta-console.c b/arch/mips/mti-malta/malta-console.c new file mode 100644 index 000000000000..43bcfb4f8167 --- /dev/null +++ b/arch/mips/mti-malta/malta-console.c @@ -0,0 +1,47 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Putting things on the screen/serial line using YAMONs facilities. + */ +#include +#include +#include +#include + + +#define PORT(offset) (0x3f8 + (offset)) + + +static inline unsigned int serial_in(int offset) +{ + return inb(PORT(offset)); +} + +static inline void serial_out(int offset, int value) +{ + outb(value, PORT(offset)); +} + +int prom_putchar(char c) +{ + while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0) + ; + + serial_out(UART_TX, c); + + return 1; +} diff --git a/arch/mips/mti-malta/malta-display.c b/arch/mips/mti-malta/malta-display.c new file mode 100644 index 000000000000..7c8828fcb0ad --- /dev/null +++ b/arch/mips/mti-malta/malta-display.c @@ -0,0 +1,64 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Display routines for display messages in MIPS boards ascii display. + */ + +#include +#include +#include +#include +#include + +extern const char display_string[]; +static unsigned int display_count; +static unsigned int max_display_count; + +void mips_display_message(const char *str) +{ + static unsigned int __iomem *display = NULL; + int i; + + if (unlikely(display == NULL)) + display = ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int)); + + for (i = 0; i <= 14; i=i+2) { + if (*str) + __raw_writel(*str++, display + i); + else + __raw_writel(' ', display + i); + } +} + +static void scroll_display_message(unsigned long data); +static DEFINE_TIMER(mips_scroll_timer, scroll_display_message, HZ, 0); + +static void scroll_display_message(unsigned long data) +{ + mips_display_message(&display_string[display_count++]); + if (display_count == max_display_count) + display_count = 0; + + mod_timer(&mips_scroll_timer, jiffies + HZ); +} + +void mips_scroll_message(void) +{ + del_timer_sync(&mips_scroll_timer); + max_display_count = strlen(display_string) + 1 - 8; + mod_timer(&mips_scroll_timer, jiffies + 1); +} diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c new file mode 100644 index 000000000000..c0653021a171 --- /dev/null +++ b/arch/mips/mti-malta/malta-init.c @@ -0,0 +1,424 @@ +/* + * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * PROM library initialisation code. + */ +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#ifdef CONFIG_KGDB +extern int rs_kgdb_hook(int, int); +extern int rs_putDebugChar(char); +extern char rs_getDebugChar(void); +extern int saa9730_kgdb_hook(int); +extern int saa9730_putDebugChar(char); +extern char saa9730_getDebugChar(void); +#endif + +int prom_argc; +int *_prom_argv, *_prom_envp; + +/* + * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer. + * This macro take care of sign extension, if running in 64-bit mode. + */ +#define prom_envp(index) ((char *)(long)_prom_envp[(index)]) + +int init_debug = 0; + +int mips_revision_corid; +int mips_revision_sconid; + +/* Bonito64 system controller register base. */ +unsigned long _pcictrl_bonito; +unsigned long _pcictrl_bonito_pcicfg; + +/* GT64120 system controller register base */ +unsigned long _pcictrl_gt64120; + +/* MIPS System controller register base */ +unsigned long _pcictrl_msc; + +char *prom_getenv(char *envname) +{ + /* + * Return a pointer to the given environment variable. + * In 64-bit mode: we're using 64-bit pointers, but all pointers + * in the PROM structures are only 32-bit, so we need some + * workarounds, if we are running in 64-bit mode. + */ + int i, index=0; + + i = strlen(envname); + + while (prom_envp(index)) { + if(strncmp(envname, prom_envp(index), i) == 0) { + return(prom_envp(index+1)); + } + index += 2; + } + + return NULL; +} + +static inline unsigned char str2hexnum(unsigned char c) +{ + if (c >= '0' && c <= '9') + return c - '0'; + if (c >= 'a' && c <= 'f') + return c - 'a' + 10; + return 0; /* foo */ +} + +static inline void str2eaddr(unsigned char *ea, unsigned char *str) +{ + int i; + + for (i = 0; i < 6; i++) { + unsigned char num; + + if((*str == '.') || (*str == ':')) + str++; + num = str2hexnum(*str++) << 4; + num |= (str2hexnum(*str++)); + ea[i] = num; + } +} + +int get_ethernet_addr(char *ethernet_addr) +{ + char *ethaddr_str; + + ethaddr_str = prom_getenv("ethaddr"); + if (!ethaddr_str) { + printk("ethaddr not set in boot prom\n"); + return -1; + } + str2eaddr(ethernet_addr, ethaddr_str); + + if (init_debug > 1) { + int i; + printk("get_ethernet_addr: "); + for (i=0; i<5; i++) + printk("%02x:", (unsigned char)*(ethernet_addr+i)); + printk("%02x\n", *(ethernet_addr+i)); + } + + return 0; +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE +static void __init console_config(void) +{ + char console_string[40]; + int baud = 0; + char parity = '\0', bits = '\0', flow = '\0'; + char *s; + + if ((strstr(prom_getcmdline(), "console=")) == NULL) { + s = prom_getenv("modetty0"); + if (s) { + while (*s >= '0' && *s <= '9') + baud = baud*10 + *s++ - '0'; + if (*s == ',') s++; + if (*s) parity = *s++; + if (*s == ',') s++; + if (*s) bits = *s++; + if (*s == ',') s++; + if (*s == 'h') flow = 'r'; + } + if (baud == 0) + baud = 38400; + if (parity != 'n' && parity != 'o' && parity != 'e') + parity = 'n'; + if (bits != '7' && bits != '8') + bits = '8'; + if (flow == '\0') + flow = 'r'; + sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, parity, bits, flow); + strcat(prom_getcmdline(), console_string); + pr_info("Config serial console:%s\n", console_string); + } +} +#endif + +#ifdef CONFIG_KGDB +void __init kgdb_config(void) +{ + extern int (*generic_putDebugChar)(char); + extern char (*generic_getDebugChar)(void); + char *argptr; + int line, speed; + + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) { + argptr += strlen("kgdb=ttyS"); + if (*argptr != '0' && *argptr != '1') + printk("KGDB: Unknown serial line /dev/ttyS%c, " + "falling back to /dev/ttyS1\n", *argptr); + line = *argptr == '0' ? 0 : 1; + printk("KGDB: Using serial line /dev/ttyS%d for session\n", line); + + speed = 0; + if (*++argptr == ',') + { + int c; + while ((c = *++argptr) && ('0' <= c && c <= '9')) + speed = speed * 10 + c - '0'; + } + { + speed = rs_kgdb_hook(line, speed); + generic_putDebugChar = rs_putDebugChar; + generic_getDebugChar = rs_getDebugChar; + } + + pr_info("KGDB: Using serial line /dev/ttyS%d at %d for " + "session, please connect your debugger\n", + line ? 1 : 0, speed); + + { + char *s; + for (s = "Please connect GDB to this port\r\n"; *s; ) + generic_putDebugChar(*s++); + } + + /* Breakpoint is invoked after interrupts are initialised */ + } +} +#endif + +static void __init mips_nmi_setup(void) +{ + void *base; + extern char except_vec_nmi; + + base = cpu_has_veic ? + (void *)(CAC_BASE + 0xa80) : + (void *)(CAC_BASE + 0x380); + memcpy(base, &except_vec_nmi, 0x80); + flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); +} + +static void __init mips_ejtag_setup(void) +{ + void *base; + extern char except_vec_ejtag_debug; + + base = cpu_has_veic ? + (void *)(CAC_BASE + 0xa00) : + (void *)(CAC_BASE + 0x300); + memcpy(base, &except_vec_ejtag_debug, 0x80); + flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); +} + +extern struct plat_smp_ops msmtc_smp_ops; + +void __init prom_init(void) +{ + prom_argc = fw_arg0; + _prom_argv = (int *) fw_arg1; + _prom_envp = (int *) fw_arg2; + + mips_display_message("LINUX"); + + /* + * early setup of _pcictrl_bonito so that we can determine + * the system controller on a CORE_EMUL board + */ + _pcictrl_bonito = (unsigned long)ioremap(BONITO_REG_BASE, BONITO_REG_SIZE); + + mips_revision_corid = MIPS_REVISION_CORID; + + if (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL) { + if (BONITO_PCIDID == 0x0001df53 || + BONITO_PCIDID == 0x0003df53) + mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_BON; + else + mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_MSC; + } + + mips_revision_sconid = MIPS_REVISION_SCONID; + if (mips_revision_sconid == MIPS_REVISION_SCON_OTHER) { + switch (mips_revision_corid) { + case MIPS_REVISION_CORID_QED_RM5261: + case MIPS_REVISION_CORID_CORE_LV: + case MIPS_REVISION_CORID_CORE_FPGA: + case MIPS_REVISION_CORID_CORE_FPGAR2: + mips_revision_sconid = MIPS_REVISION_SCON_GT64120; + break; + case MIPS_REVISION_CORID_CORE_EMUL_BON: + case MIPS_REVISION_CORID_BONITO64: + case MIPS_REVISION_CORID_CORE_20K: + mips_revision_sconid = MIPS_REVISION_SCON_BONITO; + break; + case MIPS_REVISION_CORID_CORE_MSC: + case MIPS_REVISION_CORID_CORE_FPGA2: + case MIPS_REVISION_CORID_CORE_24K: + /* + * SOCit/ROCit support is essentially identical + * but make an attempt to distinguish them + */ + mips_revision_sconid = MIPS_REVISION_SCON_SOCIT; + break; + case MIPS_REVISION_CORID_CORE_FPGA3: + case MIPS_REVISION_CORID_CORE_FPGA4: + case MIPS_REVISION_CORID_CORE_FPGA5: + case MIPS_REVISION_CORID_CORE_EMUL_MSC: + default: + /* See above */ + mips_revision_sconid = MIPS_REVISION_SCON_ROCIT; + break; + } + } + + switch (mips_revision_sconid) { + u32 start, map, mask, data; + + case MIPS_REVISION_SCON_GT64120: + /* + * Setup the North bridge to do Master byte-lane swapping + * when running in bigendian. + */ + _pcictrl_gt64120 = (unsigned long)ioremap(MIPS_GT_BASE, 0x2000); + +#ifdef CONFIG_CPU_LITTLE_ENDIAN + GT_WRITE(GT_PCI0_CMD_OFS, GT_PCI0_CMD_MBYTESWAP_BIT | + GT_PCI0_CMD_SBYTESWAP_BIT); +#else + GT_WRITE(GT_PCI0_CMD_OFS, 0); +#endif + /* Fix up PCI I/O mapping if necessary (for Atlas). */ + start = GT_READ(GT_PCI0IOLD_OFS); + map = GT_READ(GT_PCI0IOREMAP_OFS); + if ((start & map) != 0) { + map &= ~start; + GT_WRITE(GT_PCI0IOREMAP_OFS, map); + } + + set_io_port_base(MALTA_GT_PORT_BASE); + break; + + case MIPS_REVISION_SCON_BONITO: + _pcictrl_bonito_pcicfg = (unsigned long)ioremap(BONITO_PCICFG_BASE, BONITO_PCICFG_SIZE); + + /* + * Disable Bonito IOBC. + */ + BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & + ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | + BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); + + /* + * Setup the North bridge to do Master byte-lane swapping + * when running in bigendian. + */ +#ifdef CONFIG_CPU_LITTLE_ENDIAN + BONITO_BONGENCFG = BONITO_BONGENCFG & + ~(BONITO_BONGENCFG_MSTRBYTESWAP | + BONITO_BONGENCFG_BYTESWAP); +#else + BONITO_BONGENCFG = BONITO_BONGENCFG | + BONITO_BONGENCFG_MSTRBYTESWAP | + BONITO_BONGENCFG_BYTESWAP; +#endif + + set_io_port_base(MALTA_BONITO_PORT_BASE); + break; + + case MIPS_REVISION_SCON_SOCIT: + case MIPS_REVISION_SCON_ROCIT: + _pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000); + mips_pci_controller: + mb(); + MSC_READ(MSC01_PCI_CFG, data); + MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT); + wmb(); + + /* Fix up lane swapping. */ +#ifdef CONFIG_CPU_LITTLE_ENDIAN + MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP); +#else + MSC_WRITE(MSC01_PCI_SWAP, + MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_IO_SHF | + MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF | + MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF); +#endif + /* Fix up target memory mapping. */ + MSC_READ(MSC01_PCI_BAR0, mask); + MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK); + + /* Don't handle target retries indefinitely. */ + if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) == + MSC01_PCI_CFG_MAXRTRY_MSK) + data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK << + MSC01_PCI_CFG_MAXRTRY_SHF)) | + ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) << + MSC01_PCI_CFG_MAXRTRY_SHF); + + wmb(); + MSC_WRITE(MSC01_PCI_CFG, data); + mb(); + + set_io_port_base(MALTA_MSC_PORT_BASE); + break; + + case MIPS_REVISION_SCON_SOCITSC: + case MIPS_REVISION_SCON_SOCITSCP: + _pcictrl_msc = (unsigned long)ioremap(MIPS_SOCITSC_PCI_REG_BASE, 0x2000); + goto mips_pci_controller; + + default: + /* Unknown system controller */ + mips_display_message("SC Error"); + while (1); /* We die here... */ + } + board_nmi_handler_setup = mips_nmi_setup; + board_ejtag_handler_setup = mips_ejtag_setup; + + pr_info("\nLINUX started...\n"); + prom_init_cmdline(); + prom_meminit(); +#ifdef CONFIG_SERIAL_8250_CONSOLE + console_config(); +#endif +#ifdef CONFIG_MIPS_CMP + register_smp_ops(&cmp_smp_ops); +#endif +#ifdef CONFIG_MIPS_MT_SMP + register_smp_ops(&vsmp_smp_ops); +#endif +#ifdef CONFIG_MIPS_MT_SMTC + register_smp_ops(&msmtc_smp_ops); +#endif +} diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c new file mode 100644 index 000000000000..ea176113fea9 --- /dev/null +++ b/arch/mips/mti-malta/malta-int.c @@ -0,0 +1,712 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc. + * Copyright (C) 2001 Ralf Baechle + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Routines for generic manipulation of the interrupts found on the MIPS + * Malta board. + * The interrupt controller is located in the South Bridge a PIIX4 device + * with two internal 82C95 interrupt controllers. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +int gcmp_present = -1; +int gic_present; +static unsigned long _msc01_biu_base; +static unsigned long _gcmp_base; +static unsigned int ipi_map[NR_CPUS]; + +static DEFINE_SPINLOCK(mips_irq_lock); + +static inline int mips_pcibios_iack(void) +{ + int irq; + u32 dummy; + + /* + * Determine highest priority pending interrupt by performing + * a PCI Interrupt Acknowledge cycle. + */ + switch (mips_revision_sconid) { + case MIPS_REVISION_SCON_SOCIT: + case MIPS_REVISION_SCON_ROCIT: + case MIPS_REVISION_SCON_SOCITSC: + case MIPS_REVISION_SCON_SOCITSCP: + MSC_READ(MSC01_PCI_IACK, irq); + irq &= 0xff; + break; + case MIPS_REVISION_SCON_GT64120: + irq = GT_READ(GT_PCI0_IACK_OFS); + irq &= 0xff; + break; + case MIPS_REVISION_SCON_BONITO: + /* The following will generate a PCI IACK cycle on the + * Bonito controller. It's a little bit kludgy, but it + * was the easiest way to implement it in hardware at + * the given time. + */ + BONITO_PCIMAP_CFG = 0x20000; + + /* Flush Bonito register block */ + dummy = BONITO_PCIMAP_CFG; + iob(); /* sync */ + + irq = readl((u32 *)_pcictrl_bonito_pcicfg); + iob(); /* sync */ + irq &= 0xff; + BONITO_PCIMAP_CFG = 0; + break; + default: + printk(KERN_WARNING "Unknown system controller.\n"); + return -1; + } + return irq; +} + +static inline int get_int(void) +{ + unsigned long flags; + int irq; + spin_lock_irqsave(&mips_irq_lock, flags); + + irq = mips_pcibios_iack(); + + /* + * The only way we can decide if an interrupt is spurious + * is by checking the 8259 registers. This needs a spinlock + * on an SMP system, so leave it up to the generic code... + */ + + spin_unlock_irqrestore(&mips_irq_lock, flags); + + return irq; +} + +static void malta_hw0_irqdispatch(void) +{ + int irq; + + irq = get_int(); + if (irq < 0) { + /* interrupt has already been cleared */ + return; + } + + do_IRQ(MALTA_INT_BASE + irq); +} + +static void malta_ipi_irqdispatch(void) +{ + int irq; + + irq = gic_get_int(); + if (irq < 0) + return; /* interrupt has already been cleared */ + + do_IRQ(MIPS_GIC_IRQ_BASE + irq); +} + +static void corehi_irqdispatch(void) +{ + unsigned int intedge, intsteer, pcicmd, pcibadaddr; + unsigned int pcimstat, intisr, inten, intpol; + unsigned int intrcause, datalo, datahi; + struct pt_regs *regs = get_irq_regs(); + + printk(KERN_EMERG "CoreHI interrupt, shouldn't happen, we die here!\n"); + printk(KERN_EMERG "epc : %08lx\nStatus: %08lx\n" + "Cause : %08lx\nbadVaddr : %08lx\n", + regs->cp0_epc, regs->cp0_status, + regs->cp0_cause, regs->cp0_badvaddr); + + /* Read all the registers and then print them as there is a + problem with interspersed printk's upsetting the Bonito controller. + Do it for the others too. + */ + + switch (mips_revision_sconid) { + case MIPS_REVISION_SCON_SOCIT: + case MIPS_REVISION_SCON_ROCIT: + case MIPS_REVISION_SCON_SOCITSC: + case MIPS_REVISION_SCON_SOCITSCP: + ll_msc_irq(); + break; + case MIPS_REVISION_SCON_GT64120: + intrcause = GT_READ(GT_INTRCAUSE_OFS); + datalo = GT_READ(GT_CPUERR_ADDRLO_OFS); + datahi = GT_READ(GT_CPUERR_ADDRHI_OFS); + printk(KERN_EMERG "GT_INTRCAUSE = %08x\n", intrcause); + printk(KERN_EMERG "GT_CPUERR_ADDR = %02x%08x\n", + datahi, datalo); + break; + case MIPS_REVISION_SCON_BONITO: + pcibadaddr = BONITO_PCIBADADDR; + pcimstat = BONITO_PCIMSTAT; + intisr = BONITO_INTISR; + inten = BONITO_INTEN; + intpol = BONITO_INTPOL; + intedge = BONITO_INTEDGE; + intsteer = BONITO_INTSTEER; + pcicmd = BONITO_PCICMD; + printk(KERN_EMERG "BONITO_INTISR = %08x\n", intisr); + printk(KERN_EMERG "BONITO_INTEN = %08x\n", inten); + printk(KERN_EMERG "BONITO_INTPOL = %08x\n", intpol); + printk(KERN_EMERG "BONITO_INTEDGE = %08x\n", intedge); + printk(KERN_EMERG "BONITO_INTSTEER = %08x\n", intsteer); + printk(KERN_EMERG "BONITO_PCICMD = %08x\n", pcicmd); + printk(KERN_EMERG "BONITO_PCIBADADDR = %08x\n", pcibadaddr); + printk(KERN_EMERG "BONITO_PCIMSTAT = %08x\n", pcimstat); + break; + } + + die("CoreHi interrupt", regs); +} + +static inline int clz(unsigned long x) +{ + __asm__( + " .set push \n" + " .set mips32 \n" + " clz %0, %1 \n" + " .set pop \n" + : "=r" (x) + : "r" (x)); + + return x; +} + +/* + * Version of ffs that only looks at bits 12..15. + */ +static inline unsigned int irq_ffs(unsigned int pending) +{ +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + return -clz(pending) + 31 - CAUSEB_IP; +#else + unsigned int a0 = 7; + unsigned int t0; + + t0 = pending & 0xf000; + t0 = t0 < 1; + t0 = t0 << 2; + a0 = a0 - t0; + pending = pending << t0; + + t0 = pending & 0xc000; + t0 = t0 < 1; + t0 = t0 << 1; + a0 = a0 - t0; + pending = pending << t0; + + t0 = pending & 0x8000; + t0 = t0 < 1; + /* t0 = t0 << 2; */ + a0 = a0 - t0; + /* pending = pending << t0; */ + + return a0; +#endif +} + +/* + * IRQs on the Malta board look basically (barring software IRQs which we + * don't use at all and all external interrupt sources are combined together + * on hardware interrupt 0 (MIPS IRQ 2)) like: + * + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware (ignored) + * 4 Hardware (ignored) + * 5 Hardware (ignored) + * 6 Hardware (ignored) + * 7 R4k timer (what we use) + * + * We handle the IRQ according to _our_ priority which is: + * + * Highest ---- R4k Timer + * Lowest ---- Combined hardware interrupt + * + * then we just return, if multiple IRQs are pending then we will just take + * another exception, big deal. + */ + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; + int irq; + + irq = irq_ffs(pending); + + if (irq == MIPSCPU_INT_I8259A) + malta_hw0_irqdispatch(); + else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()])) + malta_ipi_irqdispatch(); + else if (irq >= 0) + do_IRQ(MIPS_CPU_IRQ_BASE + irq); + else + spurious_interrupt(); +} + +#ifdef CONFIG_MIPS_MT_SMP + + +#define GIC_MIPS_CPU_IPI_RESCHED_IRQ 3 +#define GIC_MIPS_CPU_IPI_CALL_IRQ 4 + +#define MIPS_CPU_IPI_RESCHED_IRQ 0 /* SW int 0 for resched */ +#define C_RESCHED C_SW0 +#define MIPS_CPU_IPI_CALL_IRQ 1 /* SW int 1 for resched */ +#define C_CALL C_SW1 +static int cpu_ipi_resched_irq, cpu_ipi_call_irq; + +static void ipi_resched_dispatch(void) +{ + do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ); +} + +static void ipi_call_dispatch(void) +{ + do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ); +} + +static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) +{ + return IRQ_HANDLED; +} + +static irqreturn_t ipi_call_interrupt(int irq, void *dev_id) +{ + smp_call_function_interrupt(); + + return IRQ_HANDLED; +} + +static struct irqaction irq_resched = { + .handler = ipi_resched_interrupt, + .flags = IRQF_DISABLED|IRQF_PERCPU, + .name = "IPI_resched" +}; + +static struct irqaction irq_call = { + .handler = ipi_call_interrupt, + .flags = IRQF_DISABLED|IRQF_PERCPU, + .name = "IPI_call" +}; +#endif /* CONFIG_MIPS_MT_SMP */ + +static struct irqaction i8259irq = { + .handler = no_action, + .name = "XT-PIC cascade" +}; + +static struct irqaction corehi_irqaction = { + .handler = no_action, + .name = "CoreHi" +}; + +static msc_irqmap_t __initdata msc_irqmap[] = { + {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0}, + {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0}, +}; +static int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap); + +static msc_irqmap_t __initdata msc_eicirqmap[] = { + {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_I8259A, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_SMI, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_COREHI, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_CORELO, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0}, + {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} +}; + +static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); + +#if defined(CONFIG_MIPS_MT_SMP) +/* + * This GIC specific tabular array defines the association between External + * Interrupts and CPUs/Core Interrupts. The nature of the External + * Interrupts is also defined here - polarity/trigger. + */ +static struct gic_intr_map gic_intr_map[] = { + { GIC_EXT_INTR(0), X, X, X, X, 0 }, + { GIC_EXT_INTR(1), X, X, X, X, 0 }, + { GIC_EXT_INTR(2), X, X, X, X, 0 }, + { GIC_EXT_INTR(3), 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(4), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(5), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(6), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(7), 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(8), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(9), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(10), X, X, X, X, 0 }, + { GIC_EXT_INTR(11), X, X, X, X, 0 }, + { GIC_EXT_INTR(12), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, + { GIC_EXT_INTR(15), X, X, X, X, 0 }, + { GIC_EXT_INTR(16), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(17), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(18), 1, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(19), 1, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(20), 2, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(21), 2, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(22), 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, + { GIC_EXT_INTR(23), 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, 1 }, +}; +#endif + +/* + * GCMP needs to be detected before any SMP initialisation + */ +static int __init gcmp_probe(unsigned long addr, unsigned long size) +{ + if (gcmp_present >= 0) + return gcmp_present; + + _gcmp_base = (unsigned long) ioremap_nocache(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); + _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ); + gcmp_present = (GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) == GCMP_BASE_ADDR; + + if (gcmp_present) + printk(KERN_DEBUG "GCMP present\n"); + return gcmp_present; +} + +#if defined(CONFIG_MIPS_MT_SMP) +static void __init fill_ipi_map(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) { + if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X)) + ipi_map[gic_intr_map[i].cpunum] |= + (1 << (gic_intr_map[i].pin + 2)); + } +} +#endif + +void __init arch_init_irq(void) +{ + int gic_present, gcmp_present; + + init_i8259_irqs(); + + if (!cpu_has_veic) + mips_cpu_irq_init(); + + gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ); + if (gcmp_present) { + GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK; + gic_present = 1; + } else { + _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ); + gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) & + MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF; + } + if (gic_present) + printk(KERN_DEBUG "GIC present\n"); + + switch (mips_revision_sconid) { + case MIPS_REVISION_SCON_SOCIT: + case MIPS_REVISION_SCON_ROCIT: + if (cpu_has_veic) + init_msc_irqs(MIPS_MSC01_IC_REG_BASE, + MSC01E_INT_BASE, msc_eicirqmap, + msc_nr_eicirqs); + else + init_msc_irqs(MIPS_MSC01_IC_REG_BASE, + MSC01C_INT_BASE, msc_irqmap, + msc_nr_irqs); + break; + + case MIPS_REVISION_SCON_SOCITSC: + case MIPS_REVISION_SCON_SOCITSCP: + if (cpu_has_veic) + init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, + MSC01E_INT_BASE, msc_eicirqmap, + msc_nr_eicirqs); + else + init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE, + MSC01C_INT_BASE, msc_irqmap, + msc_nr_irqs); + } + + if (cpu_has_veic) { + set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch); + set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch); + setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq); + setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction); + } else if (cpu_has_vint) { + set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch); + set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch); +#ifdef CONFIG_MIPS_MT_SMTC + setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq, + (0x100 << MIPSCPU_INT_I8259A)); + setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, + &corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI)); + /* + * Temporary hack to ensure that the subsidiary device + * interrupts coing in via the i8259A, but associated + * with low IRQ numbers, will restore the Status.IM + * value associated with the i8259A. + */ + { + int i; + + for (i = 0; i < 16; i++) + irq_hwmask[i] = (0x100 << MIPSCPU_INT_I8259A); + } +#else /* Not SMTC */ + setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); + setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, + &corehi_irqaction); +#endif /* CONFIG_MIPS_MT_SMTC */ + } else { + setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq); + setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI, + &corehi_irqaction); + } + +#if defined(CONFIG_MIPS_MT_SMP) + if (gic_present) { + /* FIXME */ + int i; + struct { + unsigned int resched; + unsigned int call; + } ipiirq[] = { + { + .resched = GIC_IPI_EXT_INTR_RESCHED_VPE0, + .call = GIC_IPI_EXT_INTR_CALLFNC_VPE0}, + { + .resched = GIC_IPI_EXT_INTR_RESCHED_VPE1, + .call = GIC_IPI_EXT_INTR_CALLFNC_VPE1 + }, { + .resched = GIC_IPI_EXT_INTR_RESCHED_VPE2, + .call = GIC_IPI_EXT_INTR_CALLFNC_VPE2 + }, { + .resched = GIC_IPI_EXT_INTR_RESCHED_VPE3, + .call = GIC_IPI_EXT_INTR_CALLFNC_VPE3 + } + }; + fill_ipi_map(); + gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); + if (!gcmp_present) { + /* Enable the GIC */ + i = REG(_msc01_biu_base, MSC01_SC_CFG); + REG(_msc01_biu_base, MSC01_SC_CFG) = + (i | (0x1 << MSC01_SC_CFG_GICENA_SHF)); + pr_debug("GIC Enabled\n"); + } + + /* set up ipi interrupts */ + if (cpu_has_vint) { + set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch); + set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch); + } + /* Argh.. this really needs sorting out.. */ + printk("CPU%d: status register was %08x\n", smp_processor_id(), read_c0_status()); + write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4); + printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status()); + write_c0_status(0x1100dc00); + printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); + for (i = 0; i < ARRAY_SIZE(ipiirq); i++) { + setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched); + setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call); + + set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq); + set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq); + } + } else { + /* set up ipi interrupts */ + if (cpu_has_veic) { + set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch); + set_vi_handler (MSC01E_INT_SW1, ipi_call_dispatch); + cpu_ipi_resched_irq = MSC01E_INT_SW0; + cpu_ipi_call_irq = MSC01E_INT_SW1; + } else { + if (cpu_has_vint) { + set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch); + set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch); + } + cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ; + cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ; + } + + setup_irq(cpu_ipi_resched_irq, &irq_resched); + setup_irq(cpu_ipi_call_irq, &irq_call); + + set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq); + set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq); + } +#endif +} + +void malta_be_init(void) +{ + if (gcmp_present) { + /* Could change CM error mask register */ + } +} + + +static char *tr[8] = { + "mem", "gcr", "gic", "mmio", + "0x04", "0x05", "0x06", "0x07" +}; + +static char *mcmd[32] = { + [0x00] = "0x00", + [0x01] = "Legacy Write", + [0x02] = "Legacy Read", + [0x03] = "0x03", + [0x04] = "0x04", + [0x05] = "0x05", + [0x06] = "0x06", + [0x07] = "0x07", + [0x08] = "Coherent Read Own", + [0x09] = "Coherent Read Share", + [0x0a] = "Coherent Read Discard", + [0x0b] = "Coherent Ready Share Always", + [0x0c] = "Coherent Upgrade", + [0x0d] = "Coherent Writeback", + [0x0e] = "0x0e", + [0x0f] = "0x0f", + [0x10] = "Coherent Copyback", + [0x11] = "Coherent Copyback Invalidate", + [0x12] = "Coherent Invalidate", + [0x13] = "Coherent Write Invalidate", + [0x14] = "Coherent Completion Sync", + [0x15] = "0x15", + [0x16] = "0x16", + [0x17] = "0x17", + [0x18] = "0x18", + [0x19] = "0x19", + [0x1a] = "0x1a", + [0x1b] = "0x1b", + [0x1c] = "0x1c", + [0x1d] = "0x1d", + [0x1e] = "0x1e", + [0x1f] = "0x1f" +}; + +static char *core[8] = { + "Invalid/OK", "Invalid/Data", + "Shared/OK", "Shared/Data", + "Modified/OK", "Modified/Data", + "Exclusive/OK", "Exclusive/Data" +}; + +static char *causes[32] = { + "None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR", + "COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07", + "0x08", "0x09", "0x0a", "0x0b", + "0x0c", "0x0d", "0x0e", "0x0f", + "0x10", "0x11", "0x12", "0x13", + "0x14", "0x15", "0x16", "INTVN_WR_ERR", + "INTVN_RD_ERR", "0x19", "0x1a", "0x1b", + "0x1c", "0x1d", "0x1e", "0x1f" +}; + +int malta_be_handler(struct pt_regs *regs, int is_fixup) +{ + /* This duplicates the handling in do_be which seems wrong */ + int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL; + + if (gcmp_present) { + unsigned long cm_error = GCMPGCB(GCMEC); + unsigned long cm_addr = GCMPGCB(GCMEA); + unsigned long cm_other = GCMPGCB(GCMEO); + unsigned long cause, ocause; + char buf[256]; + + cause = (cm_error & GCMP_GCB_GMEC_ERROR_TYPE_MSK); + if (cause != 0) { + cause >>= GCMP_GCB_GMEC_ERROR_TYPE_SHF; + if (cause < 16) { + unsigned long cca_bits = (cm_error >> 15) & 7; + unsigned long tr_bits = (cm_error >> 12) & 7; + unsigned long mcmd_bits = (cm_error >> 7) & 0x1f; + unsigned long stag_bits = (cm_error >> 3) & 15; + unsigned long sport_bits = (cm_error >> 0) & 7; + + snprintf(buf, sizeof(buf), + "CCA=%lu TR=%s MCmd=%s STag=%lu " + "SPort=%lu\n", + cca_bits, tr[tr_bits], mcmd[mcmd_bits], + stag_bits, sport_bits); + } else { + /* glob state & sresp together */ + unsigned long c3_bits = (cm_error >> 18) & 7; + unsigned long c2_bits = (cm_error >> 15) & 7; + unsigned long c1_bits = (cm_error >> 12) & 7; + unsigned long c0_bits = (cm_error >> 9) & 7; + unsigned long sc_bit = (cm_error >> 8) & 1; + unsigned long mcmd_bits = (cm_error >> 3) & 0x1f; + unsigned long sport_bits = (cm_error >> 0) & 7; + snprintf(buf, sizeof(buf), + "C3=%s C2=%s C1=%s C0=%s SC=%s " + "MCmd=%s SPort=%lu\n", + core[c3_bits], core[c2_bits], + core[c1_bits], core[c0_bits], + sc_bit ? "True" : "False", + mcmd[mcmd_bits], sport_bits); + } + + ocause = (cm_other & GCMP_GCB_GMEO_ERROR_2ND_MSK) >> + GCMP_GCB_GMEO_ERROR_2ND_SHF; + + printk("CM_ERROR=%08lx %s <%s>\n", cm_error, + causes[cause], buf); + printk("CM_ADDR =%08lx\n", cm_addr); + printk("CM_OTHER=%08lx %s\n", cm_other, causes[ocause]); + + /* reprime cause register */ + GCMPGCB(GCMEC) = 0; + } + } + + return retval; +} diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c new file mode 100644 index 000000000000..6a1854de4579 --- /dev/null +++ b/arch/mips/mti-malta/malta-kgdb.c @@ -0,0 +1,133 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * This is the interface to the remote debugger stub. + */ +#include +#include +#include +#include + +#include +#include + +static struct serial_state rs_table[] = { + SERIAL_PORT_DFNS /* Defined in serial.h */ +}; + +static struct async_struct kdb_port_info = {0}; + +int (*generic_putDebugChar)(char); +char (*generic_getDebugChar)(void); + +static __inline__ unsigned int serial_in(struct async_struct *info, int offset) +{ + return inb(info->port + offset); +} + +static __inline__ void serial_out(struct async_struct *info, int offset, + int value) +{ + outb(value, info->port+offset); +} + +int rs_kgdb_hook(int tty_no, int speed) { + int t; + struct serial_state *ser = &rs_table[tty_no]; + + kdb_port_info.state = ser; + kdb_port_info.magic = SERIAL_MAGIC; + kdb_port_info.port = ser->port; + kdb_port_info.flags = ser->flags; + + /* + * Clear all interrupts + */ + serial_in(&kdb_port_info, UART_LSR); + serial_in(&kdb_port_info, UART_RX); + serial_in(&kdb_port_info, UART_IIR); + serial_in(&kdb_port_info, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */ + if (kdb_port_info.flags & ASYNC_FOURPORT) { + kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS; + t = UART_MCR_DTR | UART_MCR_OUT1; + } else { + kdb_port_info.MCR + = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; + t = UART_MCR_DTR | UART_MCR_RTS; + } + + kdb_port_info.MCR = t; /* no interrupts, please */ + serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR); + + /* + * and set the speed of the serial port + */ + if (speed == 0) + speed = 9600; + + t = kdb_port_info.state->baud_base / speed; + /* set DLAB */ + serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB); + serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */ + serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */ + /* reset DLAB */ + serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); + + return speed; +} + +int putDebugChar(char c) +{ + return generic_putDebugChar(c); +} + +char getDebugChar(void) +{ + return generic_getDebugChar(); +} + +int rs_putDebugChar(char c) +{ + + if (!kdb_port_info.state) { /* need to init device first */ + return 0; + } + + while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0) + ; + + serial_out(&kdb_port_info, UART_TX, c); + + return 1; +} + +char rs_getDebugChar(void) +{ + if (!kdb_port_info.state) { /* need to init device first */ + return 0; + } + + while (!(serial_in(&kdb_port_info, UART_LSR) & 1)) + ; + + return serial_in(&kdb_port_info, UART_RX); +} diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c new file mode 100644 index 000000000000..61888ff72c87 --- /dev/null +++ b/arch/mips/mti-malta/malta-memory.c @@ -0,0 +1,177 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * PROM library functions for acquiring/using memory descriptors given to + * us from the YAMON. + */ +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +/*#define DEBUG*/ + +enum yamon_memtypes { + yamon_dontuse, + yamon_prom, + yamon_free, +}; +static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; + +#ifdef DEBUG +static char *mtypes[3] = { + "Dont use memory", + "YAMON PROM memory", + "Free memmory", +}; +#endif + +/* determined physical memory size, not overridden by command line args */ +unsigned long physical_memsize = 0L; + +static struct prom_pmemblock * __init prom_getmdesc(void) +{ + char *memsize_str; + unsigned int memsize; + char cmdline[CL_SIZE], *ptr; + + /* otherwise look in the environment */ + memsize_str = prom_getenv("memsize"); + if (!memsize_str) { + printk(KERN_WARNING + "memsize not set in boot prom, set to default (32Mb)\n"); + physical_memsize = 0x02000000; + } else { +#ifdef DEBUG + pr_debug("prom_memsize = %s\n", memsize_str); +#endif + physical_memsize = simple_strtol(memsize_str, NULL, 0); + } + +#ifdef CONFIG_CPU_BIG_ENDIAN + /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last + word of physical memory */ + physical_memsize -= PAGE_SIZE; +#endif + + /* Check the command line for a memsize directive that overrides + the physical/default amount */ + strcpy(cmdline, arcs_cmdline); + ptr = strstr(cmdline, "memsize="); + if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) + ptr = strstr(ptr, " memsize="); + + if (ptr) + memsize = memparse(ptr + 8, &ptr); + else + memsize = physical_memsize; + + memset(mdesc, 0, sizeof(mdesc)); + + mdesc[0].type = yamon_dontuse; + mdesc[0].base = 0x00000000; + mdesc[0].size = 0x00001000; + + mdesc[1].type = yamon_prom; + mdesc[1].base = 0x00001000; + mdesc[1].size = 0x000ef000; + + /* + * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the + * south bridge and PCI access always forwarded to the ISA Bus and + * BIOSCS# is always generated. + * This mean that this area can't be used as DMA memory for PCI + * devices. + */ + mdesc[2].type = yamon_dontuse; + mdesc[2].base = 0x000f0000; + mdesc[2].size = 0x00010000; + + mdesc[3].type = yamon_dontuse; + mdesc[3].base = 0x00100000; + mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - mdesc[3].base; + + mdesc[4].type = yamon_free; + mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end)); + mdesc[4].size = memsize - mdesc[4].base; + + return &mdesc[0]; +} + +static int __init prom_memtype_classify(unsigned int type) +{ + switch (type) { + case yamon_free: + return BOOT_MEM_RAM; + case yamon_prom: + return BOOT_MEM_ROM_DATA; + default: + return BOOT_MEM_RESERVED; + } +} + +void __init prom_meminit(void) +{ + struct prom_pmemblock *p; + +#ifdef DEBUG + pr_debug("YAMON MEMORY DESCRIPTOR dump:\n"); + p = prom_getmdesc(); + while (p->size) { + int i = 0; + pr_debug("[%d,%p]: base<%08lx> size<%08lx> type<%s>\n", + i, p, p->base, p->size, mtypes[p->type]); + p++; + i++; + } +#endif + p = prom_getmdesc(); + + while (p->size) { + long type; + unsigned long base, size; + + type = prom_memtype_classify(p->type); + base = p->base; + size = p->size; + + add_memory_region(base, size, type); + p++; + } +} + +void __init prom_free_prom_memory(void) +{ + unsigned long addr; + int i; + + for (i = 0; i < boot_mem_map.nr_map; i++) { + if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) + continue; + + addr = boot_mem_map.map[i].addr; + free_init_pages("prom memory", + addr, addr + boot_mem_map.map[i].size); + } +} diff --git a/arch/mips/mti-malta/malta-mtd.c b/arch/mips/mti-malta/malta-mtd.c new file mode 100644 index 000000000000..8ad9bdf25dce --- /dev/null +++ b/arch/mips/mti-malta/malta-mtd.c @@ -0,0 +1,63 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 MIPS Technologies, Inc. + * written by Ralf Baechle + */ + +#include +#include +#include +#include +#include + +static struct mtd_partition malta_mtd_partitions[] = { + { + .name = "YAMON", + .offset = 0x0, + .size = 0x100000, + .mask_flags = MTD_WRITEABLE + }, { + .name = "User FS", + .offset = 0x100000, + .size = 0x2e0000 + }, { + .name = "Board Config", + .offset = 0x3e0000, + .size = 0x020000, + .mask_flags = MTD_WRITEABLE + } +}; + +static struct physmap_flash_data malta_flash_data = { + .width = 4, + .nr_parts = ARRAY_SIZE(malta_mtd_partitions), + .parts = malta_mtd_partitions +}; + +static struct resource malta_flash_resource = { + .start = 0x1e000000, + .end = 0x1e3fffff, + .flags = IORESOURCE_MEM +}; + +static struct platform_device malta_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &malta_flash_data, + }, + .num_resources = 1, + .resource = &malta_flash_resource, +}; + +static int __init malta_mtd_init(void) +{ + platform_device_register(&malta_flash); + + return 0; +} + +module_init(malta_mtd_init) diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c new file mode 100644 index 000000000000..b9743190609a --- /dev/null +++ b/arch/mips/mti-malta/malta-pci.c @@ -0,0 +1,243 @@ +/* + * Copyright (C) 1999, 2000, 2004, 2005 MIPS Technologies, Inc. + * All rights reserved. + * Authors: Carsten Langgaard + * Maciej W. Rozycki + * + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * MIPS boards specific PCI support. + */ +#include +#include +#include +#include + +#include + +#include +#include +#include + +static struct resource bonito64_mem_resource = { + .name = "Bonito PCI MEM", + .flags = IORESOURCE_MEM, +}; + +static struct resource bonito64_io_resource = { + .name = "Bonito PCI I/O", + .start = 0x00000000UL, + .end = 0x000fffffUL, + .flags = IORESOURCE_IO, +}; + +static struct resource gt64120_mem_resource = { + .name = "GT-64120 PCI MEM", + .flags = IORESOURCE_MEM, +}; + +static struct resource gt64120_io_resource = { + .name = "GT-64120 PCI I/O", + .flags = IORESOURCE_IO, +}; + +static struct resource msc_mem_resource = { + .name = "MSC PCI MEM", + .flags = IORESOURCE_MEM, +}; + +static struct resource msc_io_resource = { + .name = "MSC PCI I/O", + .flags = IORESOURCE_IO, +}; + +extern struct pci_ops bonito64_pci_ops; +extern struct pci_ops gt64xxx_pci0_ops; +extern struct pci_ops msc_pci_ops; + +static struct pci_controller bonito64_controller = { + .pci_ops = &bonito64_pci_ops, + .io_resource = &bonito64_io_resource, + .mem_resource = &bonito64_mem_resource, + .io_offset = 0x00000000UL, +}; + +static struct pci_controller gt64120_controller = { + .pci_ops = >64xxx_pci0_ops, + .io_resource = >64120_io_resource, + .mem_resource = >64120_mem_resource, +}; + +static struct pci_controller msc_controller = { + .pci_ops = &msc_pci_ops, + .io_resource = &msc_io_resource, + .mem_resource = &msc_mem_resource, +}; + +void __init mips_pcibios_init(void) +{ + struct pci_controller *controller; + resource_size_t start, end, map, start1, end1, map1, map2, map3, mask; + + switch (mips_revision_sconid) { + case MIPS_REVISION_SCON_GT64120: + /* + * Due to a bug in the Galileo system controller, we need + * to setup the PCI BAR for the Galileo internal registers. + * This should be done in the bios/bootprom and will be + * fixed in a later revision of YAMON (the MIPS boards + * boot prom). + */ + GT_WRITE(GT_PCI0_CFGADDR_OFS, + (0 << GT_PCI0_CFGADDR_BUSNUM_SHF) | /* Local bus */ + (0 << GT_PCI0_CFGADDR_DEVNUM_SHF) | /* GT64120 dev */ + (0 << GT_PCI0_CFGADDR_FUNCTNUM_SHF) | /* Function 0*/ + ((0x20/4) << GT_PCI0_CFGADDR_REGNUM_SHF) | /* BAR 4*/ + GT_PCI0_CFGADDR_CONFIGEN_BIT); + + /* Perform the write */ + GT_WRITE(GT_PCI0_CFGDATA_OFS, CPHYSADDR(MIPS_GT_BASE)); + + /* Set up resource ranges from the controller's registers. */ + start = GT_READ(GT_PCI0M0LD_OFS); + end = GT_READ(GT_PCI0M0HD_OFS); + map = GT_READ(GT_PCI0M0REMAP_OFS); + end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK); + start1 = GT_READ(GT_PCI0M1LD_OFS); + end1 = GT_READ(GT_PCI0M1HD_OFS); + map1 = GT_READ(GT_PCI0M1REMAP_OFS); + end1 = (end1 & GT_PCI_HD_MSK) | (start1 & ~GT_PCI_HD_MSK); + /* Cannot support multiple windows, use the wider. */ + if (end1 - start1 > end - start) { + start = start1; + end = end1; + map = map1; + } + mask = ~(start ^ end); + /* We don't support remapping with a discontiguous mask. */ + BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && + mask != ~((mask & -mask) - 1)); + gt64120_mem_resource.start = start; + gt64120_mem_resource.end = end; + gt64120_controller.mem_offset = (start & mask) - (map & mask); + /* Addresses are 36-bit, so do shifts in the destinations. */ + gt64120_mem_resource.start <<= GT_PCI_DCRM_SHF; + gt64120_mem_resource.end <<= GT_PCI_DCRM_SHF; + gt64120_mem_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1; + gt64120_controller.mem_offset <<= GT_PCI_DCRM_SHF; + + start = GT_READ(GT_PCI0IOLD_OFS); + end = GT_READ(GT_PCI0IOHD_OFS); + map = GT_READ(GT_PCI0IOREMAP_OFS); + end = (end & GT_PCI_HD_MSK) | (start & ~GT_PCI_HD_MSK); + mask = ~(start ^ end); + /* We don't support remapping with a discontiguous mask. */ + BUG_ON((start & GT_PCI_HD_MSK) != (map & GT_PCI_HD_MSK) && + mask != ~((mask & -mask) - 1)); + gt64120_io_resource.start = map & mask; + gt64120_io_resource.end = (map & mask) | ~mask; + gt64120_controller.io_offset = 0; + /* Addresses are 36-bit, so do shifts in the destinations. */ + gt64120_io_resource.start <<= GT_PCI_DCRM_SHF; + gt64120_io_resource.end <<= GT_PCI_DCRM_SHF; + gt64120_io_resource.end |= (1 << GT_PCI_DCRM_SHF) - 1; + + controller = >64120_controller; + break; + + case MIPS_REVISION_SCON_BONITO: + /* Set up resource ranges from the controller's registers. */ + map = BONITO_PCIMAP; + map1 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO0) >> + BONITO_PCIMAP_PCIMAP_LO0_SHIFT; + map2 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO1) >> + BONITO_PCIMAP_PCIMAP_LO1_SHIFT; + map3 = (BONITO_PCIMAP & BONITO_PCIMAP_PCIMAP_LO2) >> + BONITO_PCIMAP_PCIMAP_LO2_SHIFT; + /* Combine as many adjacent windows as possible. */ + map = map1; + start = BONITO_PCILO0_BASE; + end = 1; + if (map3 == map2 + 1) { + map = map2; + start = BONITO_PCILO1_BASE; + end++; + } + if (map2 == map1 + 1) { + map = map1; + start = BONITO_PCILO0_BASE; + end++; + } + bonito64_mem_resource.start = start; + bonito64_mem_resource.end = start + + BONITO_PCIMAP_WINBASE(end) - 1; + bonito64_controller.mem_offset = start - + BONITO_PCIMAP_WINBASE(map); + + controller = &bonito64_controller; + break; + + case MIPS_REVISION_SCON_SOCIT: + case MIPS_REVISION_SCON_ROCIT: + case MIPS_REVISION_SCON_SOCITSC: + case MIPS_REVISION_SCON_SOCITSCP: + /* Set up resource ranges from the controller's registers. */ + MSC_READ(MSC01_PCI_SC2PMBASL, start); + MSC_READ(MSC01_PCI_SC2PMMSKL, mask); + MSC_READ(MSC01_PCI_SC2PMMAPL, map); + msc_mem_resource.start = start & mask; + msc_mem_resource.end = (start & mask) | ~mask; + msc_controller.mem_offset = (start & mask) - (map & mask); + + MSC_READ(MSC01_PCI_SC2PIOBASL, start); + MSC_READ(MSC01_PCI_SC2PIOMSKL, mask); + MSC_READ(MSC01_PCI_SC2PIOMAPL, map); + msc_io_resource.start = map & mask; + msc_io_resource.end = (map & mask) | ~mask; + msc_controller.io_offset = 0; + ioport_resource.end = ~mask; + + /* If ranges overlap I/O takes precedence. */ + start = start & mask; + end = start | ~mask; + if ((start >= msc_mem_resource.start && + start <= msc_mem_resource.end) || + (end >= msc_mem_resource.start && + end <= msc_mem_resource.end)) { + /* Use the larger space. */ + start = max(start, msc_mem_resource.start); + end = min(end, msc_mem_resource.end); + if (start - msc_mem_resource.start >= + msc_mem_resource.end - end) + msc_mem_resource.end = start - 1; + else + msc_mem_resource.start = end + 1; + } + + controller = &msc_controller; + break; + default: + return; + } + + if (controller->io_resource->start < 0x00001000UL) /* FIXME */ + controller->io_resource->start = 0x00001000UL; + + iomem_resource.end &= 0xfffffffffULL; /* 64 GB */ + ioport_resource.end = controller->io_resource->end; + + register_pci_controller(controller); +} diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c new file mode 100644 index 000000000000..83b9bab3cd3f --- /dev/null +++ b/arch/mips/mti-malta/malta-platform.c @@ -0,0 +1,65 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 MIPS Technologies, Inc. + * written by Ralf Baechle (ralf@linux-mips.org) + * + * Probe driver for the Malta's UART ports: + * + * o 2 ports in the SMC SuperIO + * o 1 port in the CBUS UART, a discrete 16550 which normally is only used + * for bringups. + * + * We don't use 8250_platform.c on Malta as it would result in the CBUS + * UART becoming ttyS0. + */ +#include +#include +#include + +#define SMC_PORT(base, int) \ +{ \ + .iobase = base, \ + .irq = int, \ + .uartclk = 1843200, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +#define CBUS_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) + +static struct plat_serial8250_port uart8250_data[] = { + SMC_PORT(0x3F8, 4), + SMC_PORT(0x2F8, 3), + { + .mapbase = 0x1f000900, /* The CBUS UART */ + .irq = MIPS_CPU_IRQ_BASE + 2, + .uartclk = 3686400, /* Twice the usual clk! */ + .iotype = UPIO_MEM32, + .flags = CBUS_UART_FLAGS, + .regshift = 3, + }, + { }, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM2, + .dev = { + .platform_data = uart8250_data, + }, +}; + +static int __init uart8250_init(void) +{ + return platform_device_register(&uart8250_device); +} + +module_init(uart8250_init); + +MODULE_AUTHOR("Ralf Baechle "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("8250 UART probe driver for the Malta CBUS UART"); diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c new file mode 100644 index 000000000000..42dee4da37ba --- /dev/null +++ b/arch/mips/mti-malta/malta-reset.c @@ -0,0 +1,56 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * Reset the MIPS boards. + * + */ +#include + +#include +#include +#include + +static void mips_machine_restart(char *command); +static void mips_machine_halt(void); + +static void mips_machine_restart(char *command) +{ + unsigned int __iomem *softres_reg = + ioremap(SOFTRES_REG, sizeof(unsigned int)); + + __raw_writel(GORESET, softres_reg); +} + +static void mips_machine_halt(void) +{ + unsigned int __iomem *softres_reg = + ioremap(SOFTRES_REG, sizeof(unsigned int)); + + __raw_writel(GORESET, softres_reg); +} + + +void mips_reboot_setup(void) +{ + _machine_restart = mips_machine_restart; + _machine_halt = mips_machine_halt; + pm_power_off = mips_machine_halt; +} diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c new file mode 100644 index 000000000000..e7cad54936ca --- /dev/null +++ b/arch/mips/mti-malta/malta-setup.c @@ -0,0 +1,229 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2008 Dmitri Vorobiev + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_VT +#include +#endif + +extern void malta_be_init(void); +extern int malta_be_handler(struct pt_regs *regs, int is_fixup); + +static struct resource standard_io_resources[] = { + { + .name = "dma1", + .start = 0x00, + .end = 0x1f, + .flags = IORESOURCE_BUSY + }, + { + .name = "timer", + .start = 0x40, + .end = 0x5f, + .flags = IORESOURCE_BUSY + }, + { + .name = "keyboard", + .start = 0x60, + .end = 0x6f, + .flags = IORESOURCE_BUSY + }, + { + .name = "dma page reg", + .start = 0x80, + .end = 0x8f, + .flags = IORESOURCE_BUSY + }, + { + .name = "dma2", + .start = 0xc0, + .end = 0xdf, + .flags = IORESOURCE_BUSY + }, +}; + +const char *get_system_type(void) +{ + return "MIPS Malta"; +} + +#if defined(CONFIG_MIPS_MT_SMTC) +const char display_string[] = " SMTC LINUX ON MALTA "; +#else +const char display_string[] = " LINUX ON MALTA "; +#endif /* CONFIG_MIPS_MT_SMTC */ + +#ifdef CONFIG_BLK_DEV_FD +static void __init fd_activate(void) +{ + /* + * Activate Floppy Controller in the SMSC FDC37M817 Super I/O + * Controller. + * Done by YAMON 2.00 onwards + */ + /* Entering config state. */ + SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG); + + /* Activate floppy controller. */ + SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG); + SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG); + SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG); + SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG); + + /* Exit config state. */ + SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG); +} +#endif + +#ifdef CONFIG_BLK_DEV_IDE +static void __init pci_clock_check(void) +{ + unsigned int __iomem *jmpr_p = + (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int)); + int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07; + static const int pciclocks[] __initdata = { + 33, 20, 25, 30, 12, 16, 37, 10 + }; + int pciclock = pciclocks[jmpr]; + char *argptr = prom_getcmdline(); + + if (pciclock != 33 && !strstr(argptr, "idebus=")) { + printk(KERN_WARNING "WARNING: PCI clock is %dMHz, " + "setting idebus\n", pciclock); + argptr += strlen(argptr); + sprintf(argptr, " idebus=%d", pciclock); + if (pciclock < 20 || pciclock > 66) + printk(KERN_WARNING "WARNING: IDE timing " + "calculations will be incorrect\n"); + } +} +#endif + +#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) +static void __init screen_info_setup(void) +{ + screen_info = (struct screen_info) { + .orig_x = 0, + .orig_y = 25, + .ext_mem_k = 0, + .orig_video_page = 0, + .orig_video_mode = 0, + .orig_video_cols = 80, + .unused2 = 0, + .orig_video_ega_bx = 0, + .unused3 = 0, + .orig_video_lines = 25, + .orig_video_isVGA = VIDEO_TYPE_VGAC, + .orig_video_points = 16 + }; +} +#endif + +static void __init bonito_quirks_setup(void) +{ + char *argptr; + + argptr = prom_getcmdline(); + if (strstr(argptr, "debug")) { + BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE; + printk(KERN_INFO "Enabled Bonito debug mode\n"); + } else + BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE; + +#ifdef CONFIG_DMA_COHERENT + if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) { + BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN; + printk(KERN_INFO "Enabled Bonito CPU coherency\n"); + + argptr = prom_getcmdline(); + if (strstr(argptr, "iobcuncached")) { + BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN; + BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & + ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | + BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); + printk(KERN_INFO "Disabled Bonito IOBC coherency\n"); + } else { + BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN; + BONITO_PCIMEMBASECFG |= + (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | + BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); + printk(KERN_INFO "Enabled Bonito IOBC coherency\n"); + } + } else + panic("Hardware DMA cache coherency not supported"); +#endif +} + +void __init plat_mem_setup(void) +{ + unsigned int i; + + mips_pcibios_init(); + + /* Request I/O space for devices used on the Malta board. */ + for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) + request_resource(&ioport_resource, standard_io_resources+i); + + /* + * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge. + */ + enable_dma(4); + +#ifdef CONFIG_KGDB + kgdb_config(); +#endif + +#ifdef CONFIG_DMA_COHERENT + if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO) + panic("Hardware DMA cache coherency not supported"); +#endif + + if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO) + bonito_quirks_setup(); + +#ifdef CONFIG_BLK_DEV_IDE + pci_clock_check(); +#endif + +#ifdef CONFIG_BLK_DEV_FD + fd_activate(); +#endif + +#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) + screen_info_setup(); +#endif + mips_reboot_setup(); + + board_be_init = malta_be_init; + board_be_handler = malta_be_handler; +} diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c new file mode 100644 index 000000000000..5ea705e49454 --- /dev/null +++ b/arch/mips/mti-malta/malta-smtc.c @@ -0,0 +1,154 @@ +/* + * Malta Platform-specific hooks for SMP operation + */ +#include +#include + +#include +#include +#include +#include + +/* VPE/SMP Prototype implements platform interfaces directly */ + +/* + * Cause the specified action to be performed on a targeted "CPU" + */ + +static void msmtc_send_ipi_single(int cpu, unsigned int action) +{ + /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */ + smtc_send_ipi(cpu, LINUX_SMP_IPI, action); +} + +static void msmtc_send_ipi_mask(cpumask_t mask, unsigned int action) +{ + unsigned int i; + + for_each_cpu_mask(i, mask) + msmtc_send_ipi_single(i, action); +} + +/* + * Post-config but pre-boot cleanup entry point + */ +static void __cpuinit msmtc_init_secondary(void) +{ + void smtc_init_secondary(void); + int myvpe; + + /* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */ + myvpe = read_c0_tcbind() & TCBIND_CURVPE; + if (myvpe != 0) { + /* Ideally, this should be done only once per VPE, but... */ + clear_c0_status(ST0_IM); + set_c0_status((0x100 << cp0_compare_irq) + | (0x100 << MIPS_CPU_IPI_IRQ)); + if (cp0_perfcount_irq >= 0) + set_c0_status(0x100 << cp0_perfcount_irq); + } + + smtc_init_secondary(); +} + +/* + * Platform "CPU" startup hook + */ +static void __cpuinit msmtc_boot_secondary(int cpu, struct task_struct *idle) +{ + smtc_boot_secondary(cpu, idle); +} + +/* + * SMP initialization finalization entry point + */ +static void __cpuinit msmtc_smp_finish(void) +{ + smtc_smp_finish(); +} + +/* + * Hook for after all CPUs are online + */ + +static void msmtc_cpus_done(void) +{ +} + +/* + * Platform SMP pre-initialization + * + * As noted above, we can assume a single CPU for now + * but it may be multithreaded. + */ + +static void __init msmtc_smp_setup(void) +{ + mipsmt_build_cpu_map(0); +} + +static void __init msmtc_prepare_cpus(unsigned int max_cpus) +{ + mipsmt_prepare_cpus(); +} + +struct plat_smp_ops msmtc_smp_ops = { + .send_ipi_single = msmtc_send_ipi_single, + .send_ipi_mask = msmtc_send_ipi_mask, + .init_secondary = msmtc_init_secondary, + .smp_finish = msmtc_smp_finish, + .cpus_done = msmtc_cpus_done, + .boot_secondary = msmtc_boot_secondary, + .smp_setup = msmtc_smp_setup, + .prepare_cpus = msmtc_prepare_cpus, +}; + +#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF +/* + * IRQ affinity hook + */ + + +void plat_set_irq_affinity(unsigned int irq, cpumask_t affinity) +{ + cpumask_t tmask = affinity; + int cpu = 0; + void smtc_set_irq_affinity(unsigned int irq, cpumask_t aff); + + /* + * On the legacy Malta development board, all I/O interrupts + * are routed through the 8259 and combined in a single signal + * to the CPU daughterboard, and on the CoreFPGA2/3 34K models, + * that signal is brought to IP2 of both VPEs. To avoid racing + * concurrent interrupt service events, IP2 is enabled only on + * one VPE, by convention VPE0. So long as no bits are ever + * cleared in the affinity mask, there will never be any + * interrupt forwarding. But as soon as a program or operator + * sets affinity for one of the related IRQs, we need to make + * sure that we don't ever try to forward across the VPE boundry, + * at least not until we engineer a system where the interrupt + * _ack() or _end() function can somehow know that it corresponds + * to an interrupt taken on another VPE, and perform the appropriate + * restoration of Status.IM state using MFTR/MTTR instead of the + * normal local behavior. We also ensure that no attempt will + * be made to forward to an offline "CPU". + */ + + for_each_cpu_mask(cpu, affinity) { + if ((cpu_data[cpu].vpe_id != 0) || !cpu_online(cpu)) + cpu_clear(cpu, tmask); + } + irq_desc[irq].affinity = tmask; + + if (cpus_empty(tmask)) + /* + * We could restore a default mask here, but the + * runtime code can anyway deal with the null set + */ + printk(KERN_WARNING + "IRQ affinity leaves no legal CPU for IRQ %d\n", irq); + + /* Do any generic SMTC IRQ affinity setup */ + smtc_set_irq_affinity(irq, tmask); +} +#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */ diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c new file mode 100644 index 000000000000..0b97d47691fc --- /dev/null +++ b/arch/mips/mti-malta/malta-time.c @@ -0,0 +1,163 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Setting up the clock on the MIPS boards. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +unsigned long cpu_khz; + +static int mips_cpu_timer_irq; +static int mips_cpu_perf_irq; +extern int cp0_perfcount_irq; + +static void mips_timer_dispatch(void) +{ + do_IRQ(mips_cpu_timer_irq); +} + +static void mips_perf_dispatch(void) +{ + do_IRQ(mips_cpu_perf_irq); +} + +/* + * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect + */ +static unsigned int __init estimate_cpu_frequency(void) +{ + unsigned int prid = read_c0_prid() & 0xffff00; + unsigned int count; + + unsigned long flags; + unsigned int start; + + local_irq_save(flags); + + /* Start counter exactly on falling edge of update flag */ + while (CMOS_READ(RTC_REG_A) & RTC_UIP); + while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); + + /* Start r4k counter. */ + start = read_c0_count(); + + /* Read counter exactly on falling edge of update flag */ + while (CMOS_READ(RTC_REG_A) & RTC_UIP); + while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); + + count = read_c0_count() - start; + + /* restore interrupts */ + local_irq_restore(flags); + + mips_hpt_frequency = count; + if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && + (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) + count *= 2; + + count += 5000; /* round */ + count -= count%10000; + + return count; +} + +unsigned long read_persistent_clock(void) +{ + return mc146818_get_cmos_time(); +} + +static void __init plat_perf_setup(void) +{ +#ifdef MSC01E_INT_BASE + if (cpu_has_veic) { + set_vi_handler(MSC01E_INT_PERFCTR, mips_perf_dispatch); + mips_cpu_perf_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR; + } else +#endif + if (cp0_perfcount_irq >= 0) { + if (cpu_has_vint) + set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch); + mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq; +#ifdef CONFIG_SMP + set_irq_handler(mips_cpu_perf_irq, handle_percpu_irq); +#endif + } +} + +unsigned int __cpuinit get_c0_compare_int(void) +{ +#ifdef MSC01E_INT_BASE + if (cpu_has_veic) { + set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch); + mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR; + } else +#endif + { + if (cpu_has_vint) + set_vi_handler(cp0_compare_irq, mips_timer_dispatch); + mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; + } + + return mips_cpu_timer_irq; +} + +void __init plat_time_init(void) +{ + unsigned int est_freq; + + /* Set Data mode - binary. */ + CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); + + est_freq = estimate_cpu_frequency(); + + printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, + (est_freq%1000000)*100/1000000); + + cpu_khz = est_freq / 1000; + + mips_scroll_message(); +#ifdef CONFIG_I8253 /* Only Malta has a PIT */ + setup_pit_timer(); +#endif + + plat_perf_setup(); +} diff --git a/include/asm-mips/mach-malta/cpu-feature-overrides.h b/include/asm-mips/mach-malta/cpu-feature-overrides.h new file mode 100644 index 000000000000..7f3e3f9bd23a --- /dev/null +++ b/include/asm-mips/mach-malta/cpu-feature-overrides.h @@ -0,0 +1,72 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Chris Dearman + * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) + */ +#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H + + +/* + * CPU feature overrides for MIPS boards + */ +#ifdef CONFIG_CPU_MIPS32 +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +/* #define cpu_has_fpu ? */ +/* #define cpu_has_32fpr ? */ +#define cpu_has_counter 1 +/* #define cpu_has_watch ? */ +#define cpu_has_divec 1 +#define cpu_has_vce 0 +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_prefetch ? */ +#define cpu_has_mcheck 1 +/* #define cpu_has_ejtag ? */ +#ifdef CONFIG_CPU_HAS_LLSC +#define cpu_has_llsc 1 +#else +#define cpu_has_llsc 0 +#endif +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +#define cpu_has_nofpuex 0 +/* #define cpu_has_64bits ? */ +/* #define cpu_has_64bit_zero_reg ? */ +/* #define cpu_has_inclusive_pcaches ? */ +#define cpu_icache_snoops_remote_store 1 +#endif + +#ifdef CONFIG_CPU_MIPS64 +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +/* #define cpu_has_fpu ? */ +/* #define cpu_has_32fpr ? */ +#define cpu_has_counter 1 +/* #define cpu_has_watch ? */ +#define cpu_has_divec 1 +#define cpu_has_vce 0 +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +/* #define cpu_has_prefetch ? */ +#define cpu_has_mcheck 1 +/* #define cpu_has_ejtag ? */ +#define cpu_has_llsc 1 +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +#define cpu_has_nofpuex 0 +/* #define cpu_has_64bits ? */ +/* #define cpu_has_64bit_zero_reg ? */ +/* #define cpu_has_inclusive_pcaches ? */ +#define cpu_icache_snoops_remote_store 1 +#endif + +#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-malta/irq.h b/include/asm-mips/mach-malta/irq.h new file mode 100644 index 000000000000..9b9da26683c2 --- /dev/null +++ b/include/asm-mips/mach-malta/irq.h @@ -0,0 +1,9 @@ +#ifndef __ASM_MACH_MIPS_IRQ_H +#define __ASM_MACH_MIPS_IRQ_H + + +#define NR_IRQS 256 + +#include_next + +#endif /* __ASM_MACH_MIPS_IRQ_H */ diff --git a/include/asm-mips/mach-malta/kernel-entry-init.h b/include/asm-mips/mach-malta/kernel-entry-init.h new file mode 100644 index 000000000000..0b793e7bf67e --- /dev/null +++ b/include/asm-mips/mach-malta/kernel-entry-init.h @@ -0,0 +1,52 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Chris Dearman (chris@mips.com) + * Copyright (C) 2007 Mips Technologies, Inc. + */ +#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H +#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H + + .macro kernel_entry_setup +#ifdef CONFIG_MIPS_MT_SMTC + mfc0 t0, CP0_CONFIG + bgez t0, 9f + mfc0 t0, CP0_CONFIG, 1 + bgez t0, 9f + mfc0 t0, CP0_CONFIG, 2 + bgez t0, 9f + mfc0 t0, CP0_CONFIG, 3 + and t0, 1<<2 + bnez t0, 0f +9: + /* Assume we came from YAMON... */ + PTR_LA v0, 0x9fc00534 /* YAMON print */ + lw v0, (v0) + move a0, zero + PTR_LA a1, nonmt_processor + jal v0 + + PTR_LA v0, 0x9fc00520 /* YAMON exit */ + lw v0, (v0) + li a0, 1 + jal v0 + +1: b 1b + + __INITDATA +nonmt_processor: + .asciz "SMTC kernel requires the MT ASE to run\n" + __FINIT +0: +#endif + .endm + +/* + * Do SMP slave processor setup necessary before we can safely execute C code. + */ + .macro smp_slave_setup + .endm + +#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */ diff --git a/include/asm-mips/mach-malta/mach-gt64120.h b/include/asm-mips/mach-malta/mach-gt64120.h new file mode 100644 index 000000000000..0f863148f3b6 --- /dev/null +++ b/include/asm-mips/mach-malta/mach-gt64120.h @@ -0,0 +1,19 @@ +/* + * This is a direct copy of the ev96100.h file, with a global + * search and replace. The numbers are the same. + * + * The reason I'm duplicating this is so that the 64120/96100 + * defines won't be confusing in the source code. + */ +#ifndef _ASM_MACH_MIPS_MACH_GT64120_DEP_H +#define _ASM_MACH_MIPS_MACH_GT64120_DEP_H + +#define MIPS_GT_BASE 0x1be00000 + +extern unsigned long _pcictrl_gt64120; +/* + * GT64120 config space base address + */ +#define GT64120_BASE _pcictrl_gt64120 + +#endif /* _ASM_MACH_MIPS_MACH_GT64120_DEP_H */ diff --git a/include/asm-mips/mach-malta/mc146818rtc.h b/include/asm-mips/mach-malta/mc146818rtc.h new file mode 100644 index 000000000000..ea612f37f614 --- /dev/null +++ b/include/asm-mips/mach-malta/mc146818rtc.h @@ -0,0 +1,48 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2003 by Ralf Baechle + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * RTC routines for Malta style attached PIIX4 device, which contains a + * Motorola MC146818A-compatible Real Time Clock. + */ +#ifndef __ASM_MACH_MALTA_MC146818RTC_H +#define __ASM_MACH_MALTA_MC146818RTC_H + +#include +#include +#include + +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_IRQ 8 + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + outb(addr, MALTA_RTC_ADR_REG); + return inb(MALTA_RTC_DAT_REG); +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + outb(addr, MALTA_RTC_ADR_REG); + outb(data, MALTA_RTC_DAT_REG); +} + +#define RTC_ALWAYS_BCD 0 + +#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900) + +#endif /* __ASM_MACH_MALTA_MC146818RTC_H */ diff --git a/include/asm-mips/mach-malta/war.h b/include/asm-mips/mach-malta/war.h new file mode 100644 index 000000000000..7c6931d5f45f --- /dev/null +++ b/include/asm-mips/mach-malta/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_MIPS_WAR_H +#define __ASM_MIPS_MACH_MIPS_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 1 +#define MIPS_CACHE_SYNC_WAR 1 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 1 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */ diff --git a/include/asm-mips/mach-mips/cpu-feature-overrides.h b/include/asm-mips/mach-mips/cpu-feature-overrides.h deleted file mode 100644 index 7f3e3f9bd23a..000000000000 --- a/include/asm-mips/mach-mips/cpu-feature-overrides.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2004 Chris Dearman - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - */ -#ifndef __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H - - -/* - * CPU feature overrides for MIPS boards - */ -#ifdef CONFIG_CPU_MIPS32 -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_4k_cache 1 -/* #define cpu_has_fpu ? */ -/* #define cpu_has_32fpr ? */ -#define cpu_has_counter 1 -/* #define cpu_has_watch ? */ -#define cpu_has_divec 1 -#define cpu_has_vce 0 -/* #define cpu_has_cache_cdex_p ? */ -/* #define cpu_has_cache_cdex_s ? */ -/* #define cpu_has_prefetch ? */ -#define cpu_has_mcheck 1 -/* #define cpu_has_ejtag ? */ -#ifdef CONFIG_CPU_HAS_LLSC -#define cpu_has_llsc 1 -#else -#define cpu_has_llsc 0 -#endif -/* #define cpu_has_vtag_icache ? */ -/* #define cpu_has_dc_aliases ? */ -/* #define cpu_has_ic_fills_f_dc ? */ -#define cpu_has_nofpuex 0 -/* #define cpu_has_64bits ? */ -/* #define cpu_has_64bit_zero_reg ? */ -/* #define cpu_has_inclusive_pcaches ? */ -#define cpu_icache_snoops_remote_store 1 -#endif - -#ifdef CONFIG_CPU_MIPS64 -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_4k_cache 1 -/* #define cpu_has_fpu ? */ -/* #define cpu_has_32fpr ? */ -#define cpu_has_counter 1 -/* #define cpu_has_watch ? */ -#define cpu_has_divec 1 -#define cpu_has_vce 0 -/* #define cpu_has_cache_cdex_p ? */ -/* #define cpu_has_cache_cdex_s ? */ -/* #define cpu_has_prefetch ? */ -#define cpu_has_mcheck 1 -/* #define cpu_has_ejtag ? */ -#define cpu_has_llsc 1 -/* #define cpu_has_vtag_icache ? */ -/* #define cpu_has_dc_aliases ? */ -/* #define cpu_has_ic_fills_f_dc ? */ -#define cpu_has_nofpuex 0 -/* #define cpu_has_64bits ? */ -/* #define cpu_has_64bit_zero_reg ? */ -/* #define cpu_has_inclusive_pcaches ? */ -#define cpu_icache_snoops_remote_store 1 -#endif - -#endif /* __ASM_MACH_MIPS_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-mips/irq.h b/include/asm-mips/mach-mips/irq.h deleted file mode 100644 index 9b9da26683c2..000000000000 --- a/include/asm-mips/mach-mips/irq.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_MACH_MIPS_IRQ_H -#define __ASM_MACH_MIPS_IRQ_H - - -#define NR_IRQS 256 - -#include_next - -#endif /* __ASM_MACH_MIPS_IRQ_H */ diff --git a/include/asm-mips/mach-mips/kernel-entry-init.h b/include/asm-mips/mach-mips/kernel-entry-init.h deleted file mode 100644 index 0b793e7bf67e..000000000000 --- a/include/asm-mips/mach-mips/kernel-entry-init.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Chris Dearman (chris@mips.com) - * Copyright (C) 2007 Mips Technologies, Inc. - */ -#ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H -#define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H - - .macro kernel_entry_setup -#ifdef CONFIG_MIPS_MT_SMTC - mfc0 t0, CP0_CONFIG - bgez t0, 9f - mfc0 t0, CP0_CONFIG, 1 - bgez t0, 9f - mfc0 t0, CP0_CONFIG, 2 - bgez t0, 9f - mfc0 t0, CP0_CONFIG, 3 - and t0, 1<<2 - bnez t0, 0f -9: - /* Assume we came from YAMON... */ - PTR_LA v0, 0x9fc00534 /* YAMON print */ - lw v0, (v0) - move a0, zero - PTR_LA a1, nonmt_processor - jal v0 - - PTR_LA v0, 0x9fc00520 /* YAMON exit */ - lw v0, (v0) - li a0, 1 - jal v0 - -1: b 1b - - __INITDATA -nonmt_processor: - .asciz "SMTC kernel requires the MT ASE to run\n" - __FINIT -0: -#endif - .endm - -/* - * Do SMP slave processor setup necessary before we can safely execute C code. - */ - .macro smp_slave_setup - .endm - -#endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */ diff --git a/include/asm-mips/mach-mips/mach-gt64120.h b/include/asm-mips/mach-mips/mach-gt64120.h deleted file mode 100644 index 0f863148f3b6..000000000000 --- a/include/asm-mips/mach-mips/mach-gt64120.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * This is a direct copy of the ev96100.h file, with a global - * search and replace. The numbers are the same. - * - * The reason I'm duplicating this is so that the 64120/96100 - * defines won't be confusing in the source code. - */ -#ifndef _ASM_MACH_MIPS_MACH_GT64120_DEP_H -#define _ASM_MACH_MIPS_MACH_GT64120_DEP_H - -#define MIPS_GT_BASE 0x1be00000 - -extern unsigned long _pcictrl_gt64120; -/* - * GT64120 config space base address - */ -#define GT64120_BASE _pcictrl_gt64120 - -#endif /* _ASM_MACH_MIPS_MACH_GT64120_DEP_H */ diff --git a/include/asm-mips/mach-mips/mc146818rtc.h b/include/asm-mips/mach-mips/mc146818rtc.h deleted file mode 100644 index ea612f37f614..000000000000 --- a/include/asm-mips/mach-mips/mc146818rtc.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * Copyright (C) 2003 by Ralf Baechle - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * RTC routines for Malta style attached PIIX4 device, which contains a - * Motorola MC146818A-compatible Real Time Clock. - */ -#ifndef __ASM_MACH_MALTA_MC146818RTC_H -#define __ASM_MACH_MALTA_MC146818RTC_H - -#include -#include -#include - -#define RTC_PORT(x) (0x70 + (x)) -#define RTC_IRQ 8 - -static inline unsigned char CMOS_READ(unsigned long addr) -{ - outb(addr, MALTA_RTC_ADR_REG); - return inb(MALTA_RTC_DAT_REG); -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long addr) -{ - outb(addr, MALTA_RTC_ADR_REG); - outb(data, MALTA_RTC_DAT_REG); -} - -#define RTC_ALWAYS_BCD 0 - -#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900) - -#endif /* __ASM_MACH_MALTA_MC146818RTC_H */ diff --git a/include/asm-mips/mach-mips/war.h b/include/asm-mips/mach-mips/war.h deleted file mode 100644 index 7c6931d5f45f..000000000000 --- a/include/asm-mips/mach-mips/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_MIPS_WAR_H -#define __ASM_MIPS_MACH_MIPS_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 1 -#define MIPS_CACHE_SYNC_WAR 1 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 1 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */ -- cgit v1.2.3 From 14476007c90005c8992b786c15a59cca31f53268 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 10 Jul 2008 01:02:08 +0900 Subject: [MIPS] txx9: Make gpio_txx9 entirely spinlock-safe TXx9 GPIO set/get routines are spinlock-safe. This patch make gpio_direction_{input,output} routines also spinlock-safe so that they can be used during early board setup. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/kernel/gpio_txx9.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/mips/kernel/gpio_txx9.c b/arch/mips/kernel/gpio_txx9.c index b1436a857998..c6854d9df926 100644 --- a/arch/mips/kernel/gpio_txx9.c +++ b/arch/mips/kernel/gpio_txx9.c @@ -47,23 +47,25 @@ static void txx9_gpio_set(struct gpio_chip *chip, unsigned int offset, static int txx9_gpio_dir_in(struct gpio_chip *chip, unsigned int offset) { - spin_lock_irq(&txx9_gpio_lock); + unsigned long flags; + spin_lock_irqsave(&txx9_gpio_lock, flags); __raw_writel(__raw_readl(&txx9_pioptr->dir) & ~(1 << offset), &txx9_pioptr->dir); mmiowb(); - spin_unlock_irq(&txx9_gpio_lock); + spin_unlock_irqrestore(&txx9_gpio_lock, flags); return 0; } static int txx9_gpio_dir_out(struct gpio_chip *chip, unsigned int offset, int value) { - spin_lock_irq(&txx9_gpio_lock); + unsigned long flags; + spin_lock_irqsave(&txx9_gpio_lock, flags); txx9_gpio_set_raw(offset, value); __raw_writel(__raw_readl(&txx9_pioptr->dir) | (1 << offset), &txx9_pioptr->dir); mmiowb(); - spin_unlock_irq(&txx9_gpio_lock); + spin_unlock_irqrestore(&txx9_gpio_lock, flags); return 0; } -- cgit v1.2.3 From 22b1d707ffc99faebd86257ad19d5bb9fc624734 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 11 Jul 2008 00:31:36 +0900 Subject: [MIPS] TXx9: Reorganize code Move arch/mips/{jmr3927,tx4927,tx4938} into arch/mips/txx9/ tree. This will help more code sharing and maintainance. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 3 +- arch/mips/Makefile | 12 +- arch/mips/jmr3927/common/Makefile | 7 - arch/mips/jmr3927/common/prom.c | 72 -- arch/mips/jmr3927/common/puts.c | 60 -- arch/mips/jmr3927/rbhma3100/Makefile | 8 - arch/mips/jmr3927/rbhma3100/init.c | 57 - arch/mips/jmr3927/rbhma3100/irq.c | 174 --- arch/mips/jmr3927/rbhma3100/kgdb_io.c | 105 -- arch/mips/jmr3927/rbhma3100/setup.c | 445 -------- arch/mips/pci/Makefile | 2 +- arch/mips/pci/fixup-jmr3927.c | 2 +- arch/mips/pci/fixup-rbtx4927.c | 2 +- arch/mips/pci/fixup-rbtx4938.c | 92 ++ arch/mips/pci/fixup-tx4938.c | 92 -- arch/mips/pci/ops-tx3927.c | 2 +- arch/mips/pci/ops-tx4927.c | 2 +- arch/mips/pci/ops-tx4938.c | 2 +- arch/mips/pci/pci-jmr3927.c | 2 +- arch/mips/tx4927/Kconfig | 3 - arch/mips/tx4927/common/Makefile | 10 - arch/mips/tx4927/common/smsc_fdc37m81x.c | 172 --- arch/mips/tx4927/common/tx4927_dbgio.c | 43 - arch/mips/tx4927/common/tx4927_irq.c | 65 -- arch/mips/tx4927/common/tx4927_prom.c | 142 --- arch/mips/tx4927/toshiba_rbtx4927/Makefile | 5 - .../tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c | 216 ---- .../toshiba_rbtx4927/toshiba_rbtx4927_prom.c | 91 -- .../toshiba_rbtx4927/toshiba_rbtx4927_setup.c | 703 ------------ arch/mips/tx4938/Kconfig | 24 - arch/mips/tx4938/common/Makefile | 8 - arch/mips/tx4938/common/dbgio.c | 48 - arch/mips/tx4938/common/irq.c | 48 - arch/mips/tx4938/common/prom.c | 124 --- arch/mips/tx4938/toshiba_rbtx4938/Makefile | 7 - arch/mips/tx4938/toshiba_rbtx4938/irq.c | 161 --- arch/mips/tx4938/toshiba_rbtx4938/prom.c | 74 -- arch/mips/tx4938/toshiba_rbtx4938/setup.c | 1124 -------------------- arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c | 99 -- arch/mips/txx9/Kconfig | 28 + arch/mips/txx9/generic/Makefile | 10 + arch/mips/txx9/generic/dbgio.c | 48 + arch/mips/txx9/generic/irq_tx4927.c | 64 ++ arch/mips/txx9/generic/irq_tx4938.c | 48 + arch/mips/txx9/generic/mem_tx4927.c | 141 +++ arch/mips/txx9/generic/mem_tx4938.c | 124 +++ arch/mips/txx9/generic/smsc_fdc37m81x.c | 172 +++ arch/mips/txx9/jmr3927/Makefile | 8 + arch/mips/txx9/jmr3927/init.c | 57 + arch/mips/txx9/jmr3927/irq.c | 174 +++ arch/mips/txx9/jmr3927/kgdb_io.c | 105 ++ arch/mips/txx9/jmr3927/prom.c | 98 ++ arch/mips/txx9/jmr3927/setup.c | 445 ++++++++ arch/mips/txx9/rbtx4927/Makefile | 3 + arch/mips/txx9/rbtx4927/irq.c | 214 ++++ arch/mips/txx9/rbtx4927/prom.c | 91 ++ arch/mips/txx9/rbtx4927/setup.c | 703 ++++++++++++ arch/mips/txx9/rbtx4938/Makefile | 3 + arch/mips/txx9/rbtx4938/irq.c | 159 +++ arch/mips/txx9/rbtx4938/prom.c | 72 ++ arch/mips/txx9/rbtx4938/setup.c | 1122 +++++++++++++++++++ arch/mips/txx9/rbtx4938/spi_eeprom.c | 99 ++ include/asm-mips/jmr3927/jmr3927.h | 177 --- include/asm-mips/jmr3927/tx3927.h | 319 ------ include/asm-mips/jmr3927/txx927.h | 121 --- include/asm-mips/tx4927/smsc_fdc37m81x.h | 69 -- include/asm-mips/tx4927/toshiba_rbtx4927.h | 49 - include/asm-mips/tx4927/tx4927.h | 280 ----- include/asm-mips/tx4938/rbtx4938.h | 168 --- include/asm-mips/tx4938/spi.h | 20 - include/asm-mips/tx4938/tx4938.h | 628 ----------- include/asm-mips/txx9/jmr3927.h | 177 +++ include/asm-mips/txx9/rbtx4927.h | 49 + include/asm-mips/txx9/rbtx4938.h | 167 +++ include/asm-mips/txx9/smsc_fdc37m81x.h | 67 ++ include/asm-mips/txx9/spi.h | 19 + include/asm-mips/txx9/tx3927.h | 319 ++++++ include/asm-mips/txx9/tx4927.h | 280 +++++ include/asm-mips/txx9/tx4938.h | 627 +++++++++++ include/asm-mips/txx9/txx927.h | 121 +++ 80 files changed, 5920 insertions(+), 6033 deletions(-) delete mode 100644 arch/mips/jmr3927/common/Makefile delete mode 100644 arch/mips/jmr3927/common/prom.c delete mode 100644 arch/mips/jmr3927/common/puts.c delete mode 100644 arch/mips/jmr3927/rbhma3100/Makefile delete mode 100644 arch/mips/jmr3927/rbhma3100/init.c delete mode 100644 arch/mips/jmr3927/rbhma3100/irq.c delete mode 100644 arch/mips/jmr3927/rbhma3100/kgdb_io.c delete mode 100644 arch/mips/jmr3927/rbhma3100/setup.c create mode 100644 arch/mips/pci/fixup-rbtx4938.c delete mode 100644 arch/mips/pci/fixup-tx4938.c delete mode 100644 arch/mips/tx4927/Kconfig delete mode 100644 arch/mips/tx4927/common/Makefile delete mode 100644 arch/mips/tx4927/common/smsc_fdc37m81x.c delete mode 100644 arch/mips/tx4927/common/tx4927_dbgio.c delete mode 100644 arch/mips/tx4927/common/tx4927_irq.c delete mode 100644 arch/mips/tx4927/common/tx4927_prom.c delete mode 100644 arch/mips/tx4927/toshiba_rbtx4927/Makefile delete mode 100644 arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c delete mode 100644 arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c delete mode 100644 arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c delete mode 100644 arch/mips/tx4938/Kconfig delete mode 100644 arch/mips/tx4938/common/Makefile delete mode 100644 arch/mips/tx4938/common/dbgio.c delete mode 100644 arch/mips/tx4938/common/irq.c delete mode 100644 arch/mips/tx4938/common/prom.c delete mode 100644 arch/mips/tx4938/toshiba_rbtx4938/Makefile delete mode 100644 arch/mips/tx4938/toshiba_rbtx4938/irq.c delete mode 100644 arch/mips/tx4938/toshiba_rbtx4938/prom.c delete mode 100644 arch/mips/tx4938/toshiba_rbtx4938/setup.c delete mode 100644 arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c create mode 100644 arch/mips/txx9/Kconfig create mode 100644 arch/mips/txx9/generic/Makefile create mode 100644 arch/mips/txx9/generic/dbgio.c create mode 100644 arch/mips/txx9/generic/irq_tx4927.c create mode 100644 arch/mips/txx9/generic/irq_tx4938.c create mode 100644 arch/mips/txx9/generic/mem_tx4927.c create mode 100644 arch/mips/txx9/generic/mem_tx4938.c create mode 100644 arch/mips/txx9/generic/smsc_fdc37m81x.c create mode 100644 arch/mips/txx9/jmr3927/Makefile create mode 100644 arch/mips/txx9/jmr3927/init.c create mode 100644 arch/mips/txx9/jmr3927/irq.c create mode 100644 arch/mips/txx9/jmr3927/kgdb_io.c create mode 100644 arch/mips/txx9/jmr3927/prom.c create mode 100644 arch/mips/txx9/jmr3927/setup.c create mode 100644 arch/mips/txx9/rbtx4927/Makefile create mode 100644 arch/mips/txx9/rbtx4927/irq.c create mode 100644 arch/mips/txx9/rbtx4927/prom.c create mode 100644 arch/mips/txx9/rbtx4927/setup.c create mode 100644 arch/mips/txx9/rbtx4938/Makefile create mode 100644 arch/mips/txx9/rbtx4938/irq.c create mode 100644 arch/mips/txx9/rbtx4938/prom.c create mode 100644 arch/mips/txx9/rbtx4938/setup.c create mode 100644 arch/mips/txx9/rbtx4938/spi_eeprom.c delete mode 100644 include/asm-mips/jmr3927/jmr3927.h delete mode 100644 include/asm-mips/jmr3927/tx3927.h delete mode 100644 include/asm-mips/jmr3927/txx927.h delete mode 100644 include/asm-mips/tx4927/smsc_fdc37m81x.h delete mode 100644 include/asm-mips/tx4927/toshiba_rbtx4927.h delete mode 100644 include/asm-mips/tx4927/tx4927.h delete mode 100644 include/asm-mips/tx4938/rbtx4938.h delete mode 100644 include/asm-mips/tx4938/spi.h delete mode 100644 include/asm-mips/tx4938/tx4938.h create mode 100644 include/asm-mips/txx9/jmr3927.h create mode 100644 include/asm-mips/txx9/rbtx4927.h create mode 100644 include/asm-mips/txx9/rbtx4938.h create mode 100644 include/asm-mips/txx9/smsc_fdc37m81x.h create mode 100644 include/asm-mips/txx9/spi.h create mode 100644 include/asm-mips/txx9/tx3927.h create mode 100644 include/asm-mips/txx9/tx4927.h create mode 100644 include/asm-mips/txx9/tx4938.h create mode 100644 include/asm-mips/txx9/txx927.h diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a0381427ec5c..3202960f7597 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -642,8 +642,7 @@ source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" -source "arch/mips/tx4927/Kconfig" -source "arch/mips/tx4938/Kconfig" +source "arch/mips/txx9/Kconfig" source "arch/mips/vr41xx/Kconfig" endmenu diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 36aa690484c8..8e1e49c5186b 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -553,8 +553,8 @@ all-$(CONFIG_SNI_RM) := vmlinux.ecoff # # Toshiba JMR-TX3927 board # -core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/jmr3927/rbhma3100/ \ - arch/mips/jmr3927/common/ +core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/txx9/jmr3927/ \ + arch/mips/txx9/generic/ cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927 load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000 @@ -562,16 +562,16 @@ load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000 # Toshiba RBTX4927 board or # Toshiba RBTX4937 board # -core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/toshiba_rbtx4927/ -core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/tx4927/common/ +core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/rbtx4927/ +core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/generic/ cflags-$(CONFIG_TOSHIBA_RBTX4927) += -Iinclude/asm-mips/mach-tx49xx load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000 # # Toshiba RBTX4938 board # -core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/ -core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/ +core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/ +core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/generic/ cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000 diff --git a/arch/mips/jmr3927/common/Makefile b/arch/mips/jmr3927/common/Makefile deleted file mode 100644 index 8fd4fcccf10e..000000000000 --- a/arch/mips/jmr3927/common/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the common code of TOSHIBA JMR-TX3927 board -# - -obj-y += prom.o puts.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/jmr3927/common/prom.c b/arch/mips/jmr3927/common/prom.c deleted file mode 100644 index 5398813e50e6..000000000000 --- a/arch/mips/jmr3927/common/prom.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * PROM library initialisation code, assuming a version of - * pmon is the boot code. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * Based on arch/mips/au1000/common/prom.c - * - * This file was derived from Carsten Langgaard's - * arch/mips/mips-boards/xx files. - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include - -#include - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - int prom_argc = fw_arg0; - char **prom_argv = (char **) fw_arg1; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { - strcpy(cp, prom_argv[actr]); - cp += strlen(prom_argv[actr]); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ - --cp; - *cp = '\0'; -} - -void __init prom_free_prom_memory(void) -{ -} diff --git a/arch/mips/jmr3927/common/puts.c b/arch/mips/jmr3927/common/puts.c deleted file mode 100644 index c611ab497888..000000000000 --- a/arch/mips/jmr3927/common/puts.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Low level uart routines to directly access a TX[34]927 SIO. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com or source@mvista.com - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * Based on arch/mips/au1000/common/puts.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#define TIMEOUT 0xffffff - -void -prom_putchar(char c) -{ - int i = 0; - - do { - i++; - if (i>TIMEOUT) - break; - } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS)); - tx3927_sioptr(1)->tfifo = c; - return; -} - -void -puts(const char *cp) -{ - while (*cp) - prom_putchar(*cp++); - prom_putchar('\r'); - prom_putchar('\n'); -} diff --git a/arch/mips/jmr3927/rbhma3100/Makefile b/arch/mips/jmr3927/rbhma3100/Makefile deleted file mode 100644 index d86e30dca8f3..000000000000 --- a/arch/mips/jmr3927/rbhma3100/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for TOSHIBA JMR-TX3927 board -# - -obj-y += init.o irq.o setup.o -obj-$(CONFIG_KGDB) += kgdb_io.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/jmr3927/rbhma3100/init.c b/arch/mips/jmr3927/rbhma3100/init.c deleted file mode 100644 index 700b9cf8eb9d..000000000000 --- a/arch/mips/jmr3927/rbhma3100/init.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * arch/mips/jmr3927/common/init.c - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include - -extern void __init prom_init_cmdline(void); - -const char *get_system_type(void) -{ - return "Toshiba" -#ifdef CONFIG_TOSHIBA_JMR3927 - " JMR_TX3927" -#endif - ; -} - -extern void puts(const char *cp); - -void __init prom_init(void) -{ -#ifdef CONFIG_TOSHIBA_JMR3927 - /* CCFG */ - if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) - puts("Warning: TX3927 TLB off\n"); -#endif - - prom_init_cmdline(); - add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); -} diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c deleted file mode 100644 index 3a47e8ce1196..000000000000 --- a/arch/mips/jmr3927/rbhma3100/irq.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#if JMR3927_IRQ_END > NR_IRQS -#error JMR3927_IRQ_END > NR_IRQS -#endif - -static unsigned char irc_level[TX3927_NUM_IR] = { - 5, 5, 5, 5, 5, 5, /* INT[5:0] */ - 7, 7, /* SIO */ - 5, 5, 5, 0, 0, /* DMA, PIO, PCI */ - 6, 6, 6 /* TMR */ -}; - -/* - * CP0_STATUS is a thread's resource (saved/restored on context switch). - * So disable_irq/enable_irq MUST handle IOC/IRC registers. - */ -static void mask_irq_ioc(unsigned int irq) -{ - /* 0: mask */ - unsigned int irq_nr = irq - JMR3927_IRQ_IOC; - unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR); - unsigned int bit = 1 << irq_nr; - jmr3927_ioc_reg_out(imask & ~bit, JMR3927_IOC_INTM_ADDR); - /* flush write buffer */ - (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); -} -static void unmask_irq_ioc(unsigned int irq) -{ - /* 0: mask */ - unsigned int irq_nr = irq - JMR3927_IRQ_IOC; - unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR); - unsigned int bit = 1 << irq_nr; - jmr3927_ioc_reg_out(imask | bit, JMR3927_IOC_INTM_ADDR); - /* flush write buffer */ - (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned long cp0_cause = read_c0_cause(); - int irq; - - if ((cp0_cause & CAUSEF_IP7) == 0) - return; - irq = (cp0_cause >> CAUSEB_IP2) & 0x0f; - - do_IRQ(irq + JMR3927_IRQ_IRC); -} - -static irqreturn_t jmr3927_ioc_interrupt(int irq, void *dev_id) -{ - unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR); - int i; - - for (i = 0; i < JMR3927_NR_IRQ_IOC; i++) { - if (istat & (1 << i)) { - irq = JMR3927_IRQ_IOC + i; - do_IRQ(irq); - } - } - return IRQ_HANDLED; -} - -static struct irqaction ioc_action = { - .handler = jmr3927_ioc_interrupt, - .mask = CPU_MASK_NONE, - .name = "IOC", -}; - -static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id) -{ - printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq); - printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n", - tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat); - - return IRQ_HANDLED; -} -static struct irqaction pcierr_action = { - .handler = jmr3927_pcierr_interrupt, - .mask = CPU_MASK_NONE, - .name = "PCI error", -}; - -static void __init jmr3927_irq_init(void); - -void __init arch_init_irq(void) -{ - /* Now, interrupt control disabled, */ - /* all IRC interrupts are masked, */ - /* all IRC interrupt mode are Low Active. */ - - /* mask all IOC interrupts */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_INTM_ADDR); - /* setup IOC interrupt mode (SOFT:High Active, Others:Low Active) */ - jmr3927_ioc_reg_out(JMR3927_IOC_INTF_SOFT, JMR3927_IOC_INTP_ADDR); - - /* clear PCI Soft interrupts */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_INTS1_ADDR); - /* clear PCI Reset interrupts */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - - jmr3927_irq_init(); - - /* setup IOC interrupt 1 (PCI, MODEM) */ - setup_irq(JMR3927_IRQ_IOCINT, &ioc_action); - -#ifdef CONFIG_PCI - setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action); -#endif - - /* enable all CPU interrupt bits. */ - set_c0_status(ST0_IM); /* IE bit is still 0. */ -} - -static struct irq_chip jmr3927_irq_ioc = { - .name = "jmr3927_ioc", - .ack = mask_irq_ioc, - .mask = mask_irq_ioc, - .mask_ack = mask_irq_ioc, - .unmask = unmask_irq_ioc, -}; - -static void __init jmr3927_irq_init(void) -{ - u32 i; - - txx9_irq_init(TX3927_IRC_REG); - for (i = 0; i < TXx9_MAX_IR; i++) - txx9_irq_set_pri(i, irc_level[i]); - for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++) - set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq); -} diff --git a/arch/mips/jmr3927/rbhma3100/kgdb_io.c b/arch/mips/jmr3927/rbhma3100/kgdb_io.c deleted file mode 100644 index 342579cfdc01..000000000000 --- a/arch/mips/jmr3927/rbhma3100/kgdb_io.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Low level uart routines to directly access a TX[34]927 SIO. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com or source@mvista.com - * - * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include - -#define TIMEOUT 0xffffff - -static int remoteDebugInitialized = 0; -static void debugInit(int baud); - -int putDebugChar(unsigned char c) -{ - int i = 0; - - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(38400); - } - - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS)); - tx3927_sioptr(0)->tfifo = c; - - return 1; -} - -unsigned char getDebugChar(void) -{ - int i = 0; - int dicr; - char c; - - if (!remoteDebugInitialized) { - remoteDebugInitialized = 1; - debugInit(38400); - } - - /* diable RX int. */ - dicr = tx3927_sioptr(0)->dicr; - tx3927_sioptr(0)->dicr = 0; - - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID) - ; - c = tx3927_sioptr(0)->rfifo; - - /* clear RX int. status */ - tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS; - /* enable RX int. */ - tx3927_sioptr(0)->dicr = dicr; - - return c; -} - -static void debugInit(int baud) -{ - tx3927_sioptr(0)->lcr = 0x020; - tx3927_sioptr(0)->dicr = 0; - tx3927_sioptr(0)->disr = 0x4100; - tx3927_sioptr(0)->cisr = 0x014; - tx3927_sioptr(0)->fcr = 0; - tx3927_sioptr(0)->flcr = 0x02; - tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) | - TXx927_SIBGR_BCLK_T0; -} diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c deleted file mode 100644 index f39c444e42d4..000000000000 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ /dev/null @@ -1,445 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * Copyright (C) 2000-2001 Toshiba Corporation - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_SERIAL_TXX9 -#include -#endif - -#include -#include -#include -#include -#include - -extern void puts(const char *cp); - -/* don't enable - see errata */ -static int jmr3927_ccfg_toeon; - -static inline void do_reset(void) -{ -#if 1 /* Resetting PCI bus */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR); - (void)jmr3927_ioc_reg_in(JMR3927_IOC_RESET_ADDR); /* flush WB */ - mdelay(1); - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); -#endif - jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR); -} - -static void jmr3927_machine_restart(char *command) -{ - local_irq_disable(); - puts("Rebooting..."); - do_reset(); -} - -static void jmr3927_machine_halt(void) -{ - puts("JMR-TX3927 halted.\n"); - while (1); -} - -static void jmr3927_machine_power_off(void) -{ - puts("JMR-TX3927 halted. Please turn off the power.\n"); - while (1); -} - -void __init plat_time_init(void) -{ - txx9_clockevent_init(TX3927_TMR_REG(0), - TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0), - JMR3927_IMCLK); - txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK); -} - -#define DO_WRITE_THROUGH -#define DO_ENABLE_CACHE - -extern char * __init prom_getcmdline(void); -static void jmr3927_board_init(void); -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; - -void __init plat_mem_setup(void) -{ - char *argptr; - - set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO); - - _machine_restart = jmr3927_machine_restart; - _machine_halt = jmr3927_machine_halt; - pm_power_off = jmr3927_machine_power_off; - - /* - * IO/MEM resources. - */ - ioport_resource.start = pci_io_resource.start; - ioport_resource.end = pci_io_resource.end; - iomem_resource.start = 0; - iomem_resource.end = 0xffffffff; - - /* Reboot on panic */ - panic_timeout = 180; - - /* cache setup */ - { - unsigned int conf; -#ifdef DO_ENABLE_CACHE - int mips_ic_disable = 0, mips_dc_disable = 0; -#else - int mips_ic_disable = 1, mips_dc_disable = 1; -#endif -#ifdef DO_WRITE_THROUGH - int mips_config_cwfon = 0; - int mips_config_wbon = 0; -#else - int mips_config_cwfon = 1; - int mips_config_wbon = 1; -#endif - - conf = read_c0_conf(); - conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON); - conf |= mips_ic_disable ? 0 : TX39_CONF_ICE; - conf |= mips_dc_disable ? 0 : TX39_CONF_DCE; - conf |= mips_config_wbon ? TX39_CONF_WBON : 0; - conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0; - - write_c0_conf(conf); - write_c0_cache(0); - } - - /* initialize board */ - jmr3927_board_init(); - - argptr = prom_getcmdline(); - - if ((argptr = strstr(argptr, "toeon")) != NULL) - jmr3927_ccfg_toeon = 1; - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "ip=")) == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " ip=bootp"); - } - -#ifdef CONFIG_SERIAL_TXX9 - { - extern int early_serial_txx9_setup(struct uart_port *port); - int i; - struct uart_port req; - for(i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i); - req.mapbase = TX3927_SIO_REG(i); - req.irq = i == 0 ? - JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1; - if (i == 0) - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = JMR3927_IMCLK; - early_serial_txx9_setup(&req); - } - } -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "console=")) == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS1,115200"); - } -#endif -#endif -} - -static void tx3927_setup(void); - -static void __init jmr3927_board_init(void) -{ - tx3927_setup(); - - /* SIO0 DTR on */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); - - jmr3927_led_set(0); - - printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", - jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, - jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, - jmr3927_dipsw1(), jmr3927_dipsw2(), - jmr3927_dipsw3(), jmr3927_dipsw4()); -} - -static void __init tx3927_setup(void) -{ - int i; -#ifdef CONFIG_PCI - unsigned long mips_pci_io_base = JMR3927_PCIIO; - unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE; - unsigned long mips_pci_mem_base = JMR3927_PCIMEM; - unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE; - /* for legacy I/O, PCI I/O PCI Bus address must be 0 */ - unsigned long mips_pci_io_pciaddr = 0; -#endif - - /* SDRAMC are configured by PROM */ - - /* ROMC */ - tx3927_romcptr->cr[1] = JMR3927_ROMCE1 | 0x00030048; - tx3927_romcptr->cr[2] = JMR3927_ROMCE2 | 0x000064c8; - tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698; - tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218; - - /* CCFG */ - /* enable Timeout BusError */ - if (jmr3927_ccfg_toeon) - tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; - - /* clear BusErrorOnWrite flag */ - tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; - /* Disable PCI snoop */ - tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; - /* do reset on watchdog */ - tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; - -#ifdef DO_WRITE_THROUGH - /* Enable PCI SNOOP - with write through only */ - tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; -#endif - - /* Pin selection */ - tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL; - tx3927_ccfgptr->pcfg |= - TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL | - (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1)); - - printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", - tx3927_ccfgptr->crir, - tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); - - /* TMR */ - for (i = 0; i < TX3927_NR_TMR; i++) - txx9_tmr_init(TX3927_TMR_REG(i)); - - /* DMA */ - tx3927_dmaptr->mcr = 0; - for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { - /* reset channel */ - tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; - tx3927_dmaptr->ch[i].ccr = 0; - } - /* enable DMA */ -#ifdef __BIG_ENDIAN - tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; -#else - tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; -#endif - -#ifdef CONFIG_PCI - /* PCIC */ - printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:", - tx3927_pcicptr->did, tx3927_pcicptr->vid, - tx3927_pcicptr->rid); - if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) { - printk("External\n"); - /* XXX */ - } else { - printk("Internal\n"); - - /* Reset PCI Bus */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - udelay(100); - jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, - JMR3927_IOC_RESET_ADDR); - udelay(100); - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - - - /* Disable External PCI Config. Access */ - tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD; -#ifdef __BIG_ENDIAN - tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE | - TX3927_PCIC_LBC_TIBSE | - TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE; -#endif - /* LB->PCI mappings */ - tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1); - tx3927_pcicptr->ilbioma = mips_pci_io_base; - tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr; - tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1); - tx3927_pcicptr->ilbmma = mips_pci_mem_base; - tx3927_pcicptr->ipbmma = mips_pci_mem_base; - /* PCI->LB mappings */ - tx3927_pcicptr->iobas = 0xffffffff; - tx3927_pcicptr->ioba = 0; - tx3927_pcicptr->tlbioma = 0; - tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1); - tx3927_pcicptr->mba = 0; - tx3927_pcicptr->tlbmma = 0; - /* Enable Direct mapping Address Space Decoder */ - tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE; - - /* Clear All Local Bus Status */ - tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL; - /* Enable All Local Bus Interrupts */ - tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL; - /* Clear All PCI Status Error */ - tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL; - /* Enable All PCI Status Error Interrupts */ - tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL; - - /* PCIC Int => IRC IRQ10 */ - tx3927_pcicptr->il = TX3927_IR_PCI; - /* Target Control (per errata) */ - tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E; - - /* Enable Bus Arbiter */ - tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN; - - tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | - PCI_COMMAND_IO | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - } -#endif /* CONFIG_PCI */ - - /* PIO */ - /* PIO[15:12] connected to LEDs */ - __raw_writel(0x0000f000, &tx3927_pioptr->dir); - __raw_writel(0, &tx3927_pioptr->maskcpu); - __raw_writel(0, &tx3927_pioptr->maskext); - txx9_gpio_init(TX3927_PIO_REG, 0, 16); - gpio_request(11, "dipsw1"); - gpio_request(10, "dipsw2"); - { - unsigned int conf; - - conf = read_c0_conf(); - if (!(conf & TX39_CONF_ICE)) - printk("TX3927 I-Cache disabled.\n"); - if (!(conf & TX39_CONF_DCE)) - printk("TX3927 D-Cache disabled.\n"); - else if (!(conf & TX39_CONF_WBON)) - printk("TX3927 D-Cache WriteThrough.\n"); - else if (!(conf & TX39_CONF_CWFON)) - printk("TX3927 D-Cache WriteBack.\n"); - else - printk("TX3927 D-Cache WriteBack (CWF) .\n"); - } -} - -/* This trick makes rtc-ds1742 driver usable as is. */ -unsigned long __swizzle_addr_b(unsigned long port) -{ - if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR) - return port; - port = (port & 0xffff0000) | (port & 0x7fff << 1); -#ifdef __BIG_ENDIAN - return port; -#else - return port | 1; -#endif -} -EXPORT_SYMBOL(__swizzle_addr_b); - -static int __init jmr3927_rtc_init(void) -{ - static struct resource __initdata res = { - .start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE, - .end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev; - dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} -device_initcall(jmr3927_rtc_init); - -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init jmr3927_wdt_init(void) -{ - return txx9_wdt_init(TX3927_TMR_REG(2)); -} -device_initcall(jmr3927_wdt_init); - -/* Minimum CLK support */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "imbus_clk")) - return (struct clk *)JMR3927_IMCLK; - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return (unsigned long)clk; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 80fa5abb25d4..4608e43de28c 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -43,7 +43,7 @@ obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o pci-jmr3927.o obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o ops-tx4927.o -obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-tx4938.o ops-tx4938.o +obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o ops-tx4938.o obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c index e974394be7bc..41dcd6a3aae5 100644 --- a/arch/mips/pci/fixup-jmr3927.c +++ b/arch/mips/pci/fixup-jmr3927.c @@ -31,7 +31,7 @@ #include #include -#include +#include int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c index 2d234ca017db..26013badfe1f 100644 --- a/arch/mips/pci/fixup-rbtx4927.c +++ b/arch/mips/pci/fixup-rbtx4927.c @@ -37,7 +37,7 @@ #include #include -#include +#include #undef DEBUG #ifdef DEBUG diff --git a/arch/mips/pci/fixup-rbtx4938.c b/arch/mips/pci/fixup-rbtx4938.c new file mode 100644 index 000000000000..64d4510c0265 --- /dev/null +++ b/arch/mips/pci/fixup-rbtx4938.c @@ -0,0 +1,92 @@ +/* + * Toshiba rbtx4938 pci routines + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#include +#include +#include +#include + +#include + +extern struct pci_controller tx4938_pci_controller[]; + +static int pci_get_irq(const struct pci_dev *dev, int pin) +{ + int irq = pin; + u8 slot = PCI_SLOT(dev->devfn); + struct pci_controller *controller = (struct pci_controller *)dev->sysdata; + + if (controller == &tx4938_pci_controller[1]) { + /* TX4938 PCIC1 */ + switch (slot) { + case TX4938_PCIC_IDSEL_AD_TO_SLOT(31): + if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL) + return RBTX4938_IRQ_IRC + TX4938_IR_ETH0; + break; + case TX4938_PCIC_IDSEL_AD_TO_SLOT(30): + if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL) + return RBTX4938_IRQ_IRC + TX4938_IR_ETH1; + break; + } + return 0; + } + + /* IRQ rotation */ + irq--; /* 0-3 */ + if (dev->bus->parent == NULL && + (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) { + /* PCI CardSlot (IDSEL=A23) */ + /* PCIA => PCIA (IDSEL=A23) */ + irq = (irq + 0 + slot) % 4; + } else { + /* PCI Backplane */ + irq = (irq + 33 - slot) % 4; + } + irq++; /* 1-4 */ + + switch (irq) { + case 1: + irq = RBTX4938_IRQ_IOC_PCIA; + break; + case 2: + irq = RBTX4938_IRQ_IOC_PCIB; + break; + case 3: + irq = RBTX4938_IRQ_IOC_PCIC; + break; + case 4: + irq = RBTX4938_IRQ_IOC_PCID; + break; + } + return irq; +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + unsigned char irq = 0; + + irq = pci_get_irq(dev, pin); + + printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n", + dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn), + PCI_FUNC(dev->devfn), irq); + + return irq; +} + +/* + * Do platform specific device initialization at pci_enable_device() time + */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + diff --git a/arch/mips/pci/fixup-tx4938.c b/arch/mips/pci/fixup-tx4938.c deleted file mode 100644 index f2ba06ee0c10..000000000000 --- a/arch/mips/pci/fixup-tx4938.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Toshiba rbtx4938 pci routines - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include - -#include - -extern struct pci_controller tx4938_pci_controller[]; - -static int pci_get_irq(const struct pci_dev *dev, int pin) -{ - int irq = pin; - u8 slot = PCI_SLOT(dev->devfn); - struct pci_controller *controller = (struct pci_controller *)dev->sysdata; - - if (controller == &tx4938_pci_controller[1]) { - /* TX4938 PCIC1 */ - switch (slot) { - case TX4938_PCIC_IDSEL_AD_TO_SLOT(31): - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL) - return RBTX4938_IRQ_IRC + TX4938_IR_ETH0; - break; - case TX4938_PCIC_IDSEL_AD_TO_SLOT(30): - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL) - return RBTX4938_IRQ_IRC + TX4938_IR_ETH1; - break; - } - return 0; - } - - /* IRQ rotation */ - irq--; /* 0-3 */ - if (dev->bus->parent == NULL && - (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) { - /* PCI CardSlot (IDSEL=A23) */ - /* PCIA => PCIA (IDSEL=A23) */ - irq = (irq + 0 + slot) % 4; - } else { - /* PCI Backplane */ - irq = (irq + 33 - slot) % 4; - } - irq++; /* 1-4 */ - - switch (irq) { - case 1: - irq = RBTX4938_IRQ_IOC_PCIA; - break; - case 2: - irq = RBTX4938_IRQ_IOC_PCIB; - break; - case 3: - irq = RBTX4938_IRQ_IOC_PCIC; - break; - case 4: - irq = RBTX4938_IRQ_IOC_PCID; - break; - } - return irq; -} - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - unsigned char irq = 0; - - irq = pci_get_irq(dev, pin); - - printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n", - dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn), - PCI_FUNC(dev->devfn), irq); - - return irq; -} - -/* - * Do platform specific device initialization at pci_enable_device() time - */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} - diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index aa698bd0d5e3..5d398f694682 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -39,7 +39,7 @@ #include #include -#include +#include static inline int mkaddr(unsigned char bus, unsigned char dev_fn, unsigned char where) diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index 1bbafeb4a774..54730eee451b 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -40,7 +40,7 @@ #include #include #include -#include +#include /* initialize in setup */ struct resource pci_io_resource = { diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c index a450c4062031..34494b82cb22 100644 --- a/arch/mips/pci/ops-tx4938.c +++ b/arch/mips/pci/ops-tx4938.c @@ -15,7 +15,7 @@ #include #include -#include +#include /* initialize in setup */ struct resource pci_io_resource = { diff --git a/arch/mips/pci/pci-jmr3927.c b/arch/mips/pci/pci-jmr3927.c index cb84f4e8ccae..7fb6bd71901a 100644 --- a/arch/mips/pci/pci-jmr3927.c +++ b/arch/mips/pci/pci-jmr3927.c @@ -31,7 +31,7 @@ #include #include -#include +#include #include struct resource pci_io_resource = { diff --git a/arch/mips/tx4927/Kconfig b/arch/mips/tx4927/Kconfig deleted file mode 100644 index 5fbbe12e0fc1..000000000000 --- a/arch/mips/tx4927/Kconfig +++ /dev/null @@ -1,3 +0,0 @@ -config TOSHIBA_FPCIB0 - bool "FPCIB0 Backplane Support" - depends on TOSHIBA_RBTX4927 diff --git a/arch/mips/tx4927/common/Makefile b/arch/mips/tx4927/common/Makefile deleted file mode 100644 index a7fe76a64964..000000000000 --- a/arch/mips/tx4927/common/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# -# Makefile for common code for Toshiba TX4927 based systems -# - -obj-y += tx4927_prom.o tx4927_irq.o - -obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o -obj-$(CONFIG_KGDB) += tx4927_dbgio.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4927/common/smsc_fdc37m81x.c b/arch/mips/tx4927/common/smsc_fdc37m81x.c deleted file mode 100644 index 33f517bc9a08..000000000000 --- a/arch/mips/tx4927/common/smsc_fdc37m81x.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Interface for smsc fdc48m81x Super IO chip - * - * Author: MontaVista Software, Inc. source@mvista.com - * - * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Copyright 2004 (c) MontaVista Software, Inc. - */ -#include -#include -#include -#include - -#define DEBUG - -/* Common Registers */ -#define SMSC_FDC37M81X_CONFIG_INDEX 0x00 -#define SMSC_FDC37M81X_CONFIG_DATA 0x01 -#define SMSC_FDC37M81X_CONF 0x02 -#define SMSC_FDC37M81X_INDEX 0x03 -#define SMSC_FDC37M81X_DNUM 0x07 -#define SMSC_FDC37M81X_DID 0x20 -#define SMSC_FDC37M81X_DREV 0x21 -#define SMSC_FDC37M81X_PCNT 0x22 -#define SMSC_FDC37M81X_PMGT 0x23 -#define SMSC_FDC37M81X_OSC 0x24 -#define SMSC_FDC37M81X_CONFPA0 0x26 -#define SMSC_FDC37M81X_CONFPA1 0x27 -#define SMSC_FDC37M81X_TEST4 0x2B -#define SMSC_FDC37M81X_TEST5 0x2C -#define SMSC_FDC37M81X_TEST1 0x2D -#define SMSC_FDC37M81X_TEST2 0x2E -#define SMSC_FDC37M81X_TEST3 0x2F - -/* Logical device numbers */ -#define SMSC_FDC37M81X_FDD 0x00 -#define SMSC_FDC37M81X_SERIAL1 0x04 -#define SMSC_FDC37M81X_SERIAL2 0x05 -#define SMSC_FDC37M81X_KBD 0x07 - -/* Logical device Config Registers */ -#define SMSC_FDC37M81X_ACTIVE 0x30 -#define SMSC_FDC37M81X_BASEADDR0 0x60 -#define SMSC_FDC37M81X_BASEADDR1 0x61 -#define SMSC_FDC37M81X_INT 0x70 -#define SMSC_FDC37M81X_INT2 0x72 -#define SMSC_FDC37M81X_MODE 0xF0 - -/* Chip Config Values */ -#define SMSC_FDC37M81X_CONFIG_ENTER 0x55 -#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa -#define SMSC_FDC37M81X_CHIP_ID 0x4d - -static unsigned long g_smsc_fdc37m81x_base = 0; - -static inline unsigned char smsc_fdc37m81x_rd(unsigned char index) -{ - outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); - - return inb(g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA); -} - -static inline void smsc_dc37m81x_wr(unsigned char index, unsigned char data) -{ - outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); - outb(data, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA); -} - -void smsc_fdc37m81x_config_beg(void) -{ - if (g_smsc_fdc37m81x_base) { - outb(SMSC_FDC37M81X_CONFIG_ENTER, - g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); - } -} - -void smsc_fdc37m81x_config_end(void) -{ - if (g_smsc_fdc37m81x_base) - outb(SMSC_FDC37M81X_CONFIG_EXIT, - g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); -} - -u8 smsc_fdc37m81x_config_get(u8 reg) -{ - u8 val = 0; - - if (g_smsc_fdc37m81x_base) - val = smsc_fdc37m81x_rd(reg); - - return val; -} - -void smsc_fdc37m81x_config_set(u8 reg, u8 val) -{ - if (g_smsc_fdc37m81x_base) - smsc_dc37m81x_wr(reg, val); -} - -unsigned long __init smsc_fdc37m81x_init(unsigned long port) -{ - const int field = sizeof(unsigned long) * 2; - u8 chip_id; - - if (g_smsc_fdc37m81x_base) - printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n", - field, g_smsc_fdc37m81x_base); - - g_smsc_fdc37m81x_base = port; - - smsc_fdc37m81x_config_beg(); - - chip_id = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DID); - if (chip_id == SMSC_FDC37M81X_CHIP_ID) - smsc_fdc37m81x_config_end(); - else { - printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n", - chip_id); - g_smsc_fdc37m81x_base = 0; - } - - return g_smsc_fdc37m81x_base; -} - -#ifdef DEBUG -void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg) -{ - printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg, - smsc_fdc37m81x_rd(reg)); -} - -void smsc_fdc37m81x_config_dump(void) -{ - u8 orig; - char *fname = "smsc_fdc37m81x_config_dump()"; - - smsc_fdc37m81x_config_beg(); - - orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM); - - printk("%s: common\n", fname); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, - SMSC_FDC37M81X_DNUM); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, - SMSC_FDC37M81X_DID); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, - SMSC_FDC37M81X_DREV); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, - SMSC_FDC37M81X_PCNT); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, - SMSC_FDC37M81X_PMGT); - - printk("%s: keyboard\n", fname); - smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, - SMSC_FDC37M81X_ACTIVE); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, - SMSC_FDC37M81X_INT); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, - SMSC_FDC37M81X_INT2); - smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, - SMSC_FDC37M81X_LDCR_F0); - - smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, orig); - - smsc_fdc37m81x_config_end(); -} -#endif diff --git a/arch/mips/tx4927/common/tx4927_dbgio.c b/arch/mips/tx4927/common/tx4927_dbgio.c deleted file mode 100644 index ea1ff23f4b72..000000000000 --- a/arch/mips/tx4927/common/tx4927_dbgio.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * linux/arch/mips/tx4927/common/tx4927_dbgio.c - * - * kgdb interface for gdb - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include - -u8 getDebugChar(void) -{ - extern u8 txx9_sio_kdbg_rd(void); - return (txx9_sio_kdbg_rd()); -} - -int putDebugChar(u8 byte) -{ - extern int txx9_sio_kdbg_wr( u8 ch ); - return (txx9_sio_kdbg_wr(byte)); -} diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/tx4927/common/tx4927_irq.c deleted file mode 100644 index 0aabd57fdad2..000000000000 --- a/arch/mips/tx4927/common/tx4927_irq.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Common tx4927 irq handler - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include -#ifdef CONFIG_TOSHIBA_RBTX4927 -#include -#endif - -void __init tx4927_irq_init(void) -{ - mips_cpu_irq_init(); - txx9_irq_init(TX4927_IRC_REG); - set_irq_chained_handler(TX4927_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP7) /* cpu timer */ - do_IRQ(TX4927_IRQ_CPU_TIMER); - else if (pending & STATUSF_IP2) { /* tx4927 pic */ - int irq = txx9_irq(); -#ifdef CONFIG_TOSHIBA_RBTX4927 - if (irq == TX4927_IRQ_NEST_EXT_ON_PIC) - irq = toshiba_rbtx4927_irq_nested(irq); -#endif - if (unlikely(irq < 0)) { - spurious_interrupt(); - return; - } - do_IRQ(irq); - } else if (pending & STATUSF_IP0) /* user line 0 */ - do_IRQ(TX4927_IRQ_USER0); - else if (pending & STATUSF_IP1) /* user line 1 */ - do_IRQ(TX4927_IRQ_USER1); - else - spurious_interrupt(); -} diff --git a/arch/mips/tx4927/common/tx4927_prom.c b/arch/mips/tx4927/common/tx4927_prom.c deleted file mode 100644 index cc2aa9d63e82..000000000000 --- a/arch/mips/tx4927/common/tx4927_prom.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * linux/arch/mips/tx4927/common/tx4927_prom.c - * - * common tx4927 memory interface - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include - -static unsigned int __init tx4927_process_sdccr(unsigned long addr) -{ - u64 val; - unsigned int sdccr_ce; - unsigned int sdccr_bs; - unsigned int sdccr_rs; - unsigned int sdccr_cs; - unsigned int sdccr_mw; - unsigned int bs = 0; - unsigned int rs = 0; - unsigned int cs = 0; - unsigned int mw = 0; - unsigned int msize = 0; - - val = __raw_readq((void __iomem *)addr); - - /* MVMCP -- need #defs for these bits masks */ - sdccr_ce = ((val & (1 << 10)) >> 10); - sdccr_bs = ((val & (1 << 8)) >> 8); - sdccr_rs = ((val & (3 << 5)) >> 5); - sdccr_cs = ((val & (3 << 2)) >> 2); - sdccr_mw = ((val & (1 << 0)) >> 0); - - if (sdccr_ce) { - switch (sdccr_bs) { - case 0:{ - bs = 2; - break; - } - case 1:{ - bs = 4; - break; - } - } - switch (sdccr_rs) { - case 0:{ - rs = 2048; - break; - } - case 1:{ - rs = 4096; - break; - } - case 2:{ - rs = 8192; - break; - } - case 3:{ - rs = 0; - break; - } - } - switch (sdccr_cs) { - case 0:{ - cs = 256; - break; - } - case 1:{ - cs = 512; - break; - } - case 2:{ - cs = 1024; - break; - } - case 3:{ - cs = 2048; - break; - } - } - switch (sdccr_mw) { - case 0:{ - mw = 8; - break; - } /* 8 bytes = 64 bits */ - case 1:{ - mw = 4; - break; - } /* 4 bytes = 32 bits */ - } - } - - /* bytes per chip MB per chip num chips */ - msize = (((rs * cs * mw) / (1024 * 1024)) * bs); - - return (msize); -} - - -unsigned int __init tx4927_get_mem_size(void) -{ - unsigned int c0; - unsigned int c1; - unsigned int c2; - unsigned int c3; - unsigned int total; - - /* MVMCP -- need #defs for these registers */ - c0 = tx4927_process_sdccr(0xff1f8000); - c1 = tx4927_process_sdccr(0xff1f8008); - c2 = tx4927_process_sdccr(0xff1f8010); - c3 = tx4927_process_sdccr(0xff1f8018); - total = c0 + c1 + c2 + c3; - - return (total); -} diff --git a/arch/mips/tx4927/toshiba_rbtx4927/Makefile b/arch/mips/tx4927/toshiba_rbtx4927/Makefile deleted file mode 100644 index 13f96725d772..000000000000 --- a/arch/mips/tx4927/toshiba_rbtx4927/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -obj-y += toshiba_rbtx4927_prom.o -obj-y += toshiba_rbtx4927_setup.o -obj-y += toshiba_rbtx4927_irq.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c deleted file mode 100644 index c18901a75cc4..000000000000 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c +++ /dev/null @@ -1,216 +0,0 @@ -/* - * linux/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c - * - * Toshiba RBTX4927 specific interrupt handlers - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -/* -IRQ Device -00 RBTX4927-ISA/00 -01 RBTX4927-ISA/01 PS2/Keyboard -02 RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15) -03 RBTX4927-ISA/03 -04 RBTX4927-ISA/04 -05 RBTX4927-ISA/05 -06 RBTX4927-ISA/06 -07 RBTX4927-ISA/07 -08 RBTX4927-ISA/08 -09 RBTX4927-ISA/09 -10 RBTX4927-ISA/10 -11 RBTX4927-ISA/11 -12 RBTX4927-ISA/12 PS2/Mouse (not supported at this time) -13 RBTX4927-ISA/13 -14 RBTX4927-ISA/14 IDE -15 RBTX4927-ISA/15 - -16 TX4927-CP0/00 Software 0 -17 TX4927-CP0/01 Software 1 -18 TX4927-CP0/02 Cascade TX4927-CP0 -19 TX4927-CP0/03 Multiplexed -- do not use -20 TX4927-CP0/04 Multiplexed -- do not use -21 TX4927-CP0/05 Multiplexed -- do not use -22 TX4927-CP0/06 Multiplexed -- do not use -23 TX4927-CP0/07 CPU TIMER - -24 TX4927-PIC/00 -25 TX4927-PIC/01 -26 TX4927-PIC/02 -27 TX4927-PIC/03 Cascade RBTX4927-IOC -28 TX4927-PIC/04 -29 TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet -30 TX4927-PIC/06 -31 TX4927-PIC/07 -32 TX4927-PIC/08 TX4927 SerialIO Channel 0 -33 TX4927-PIC/09 TX4927 SerialIO Channel 1 -34 TX4927-PIC/10 -35 TX4927-PIC/11 -36 TX4927-PIC/12 -37 TX4927-PIC/13 -38 TX4927-PIC/14 -39 TX4927-PIC/15 -40 TX4927-PIC/16 TX4927 PCI PCI-C -41 TX4927-PIC/17 -42 TX4927-PIC/18 -43 TX4927-PIC/19 -44 TX4927-PIC/20 -45 TX4927-PIC/21 -46 TX4927-PIC/22 TX4927 PCI PCI-ERR -47 TX4927-PIC/23 TX4927 PCI PCI-PMA (not used) -48 TX4927-PIC/24 -49 TX4927-PIC/25 -50 TX4927-PIC/26 -51 TX4927-PIC/27 -52 TX4927-PIC/28 -53 TX4927-PIC/29 -54 TX4927-PIC/30 -55 TX4927-PIC/31 - -56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed) [RTL-8139=PJ4] -57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed) [RTL-8139=PJ5] -58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported] -59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4) [RTL-8139=PJ6] -60 RBTX4927-IOC/04 -61 RBTX4927-IOC/05 -62 RBTX4927-IOC/06 -63 RBTX4927-IOC/07 - -NOTES: -SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58 -SouthBridge/ISA/pin=0 no pci irq used by this device -SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14 -SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59 -SouthBridge/PMC/pin=0 no pci irq used by this device -SuperIO/PS2/Keyboard, using INTR via ISA IRQ1 -SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported) -JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6 -*/ - -#include -#include -#include -#include -#ifdef CONFIG_TOSHIBA_FPCIB0 -#include -#endif -#include - -#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG 0 -#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_END 7 - -#define TOSHIBA_RBTX4927_IRQ_IOC_BEG ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG) /* 56 */ -#define TOSHIBA_RBTX4927_IRQ_IOC_END ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_END) /* 63 */ - -#define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC -#define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2) - -extern int tx4927_using_backplane; - -static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq); -static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq); - -#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC" -static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { - .name = TOSHIBA_RBTX4927_IOC_NAME, - .ack = toshiba_rbtx4927_irq_ioc_disable, - .mask = toshiba_rbtx4927_irq_ioc_disable, - .mask_ack = toshiba_rbtx4927_irq_ioc_disable, - .unmask = toshiba_rbtx4927_irq_ioc_enable, -}; -#define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL -#define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL - -int toshiba_rbtx4927_irq_nested(int sw_irq) -{ - u8 level3; - - level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f; - if (level3) { - sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + fls(level3) - 1; -#ifdef CONFIG_TOSHIBA_FPCIB0 - if (sw_irq == TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC && - tx4927_using_backplane) { - int irq = i8259_irq(); - if (irq >= 0) - sw_irq = irq; - } -#endif - } - return (sw_irq); -} - -static struct irqaction toshiba_rbtx4927_irq_ioc_action = { - .handler = no_action, - .flags = IRQF_SHARED, - .mask = CPU_MASK_NONE, - .name = TOSHIBA_RBTX4927_IOC_NAME -}; - -static void __init toshiba_rbtx4927_irq_ioc_init(void) -{ - int i; - - for (i = TOSHIBA_RBTX4927_IRQ_IOC_BEG; - i <= TOSHIBA_RBTX4927_IRQ_IOC_END; i++) - set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type, - handle_level_irq); - - setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC, - &toshiba_rbtx4927_irq_ioc_action); -} - -static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq) -{ - unsigned char v; - - v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); - v |= (1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); - writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); -} - -static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq) -{ - unsigned char v; - - v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); - v &= ~(1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); - writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); - mmiowb(); -} - -void __init arch_init_irq(void) -{ - extern void tx4927_irq_init(void); - - tx4927_irq_init(); - toshiba_rbtx4927_irq_ioc_init(); -#ifdef CONFIG_TOSHIBA_FPCIB0 - if (tx4927_using_backplane) - init_i8259_irqs(); -#endif - /* Onboard 10M Ether: High Active */ - set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH); -} diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c deleted file mode 100644 index fdbad4bc6021..000000000000 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * rbtx4927 specific prom routines - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include -#include - -void __init prom_init_cmdline(void) -{ - int argc = (int) fw_arg0; - char **argv = (char **) fw_arg1; - int i; /* Always ignore the "-c" at argv[0] */ - - /* ignore all built-in args if any f/w args given */ - if (argc > 1) { - *arcs_cmdline = '\0'; - } - - for (i = 1; i < argc; i++) { - if (i != 1) { - strcat(arcs_cmdline, " "); - } - strcat(arcs_cmdline, argv[i]); - } -} - -void __init prom_init(void) -{ - extern int tx4927_get_mem_size(void); - extern char* toshiba_name; - int msize; - - prom_init_cmdline(); - - if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) { - mips_machtype = MACH_TOSHIBA_RBTX4927; - toshiba_name = "TX4927"; - } else { - mips_machtype = MACH_TOSHIBA_RBTX4937; - toshiba_name = "TX4937"; - } - - msize = tx4927_get_mem_size(); - add_memory_region(0, msize << 20, BOOT_MEM_RAM); -} - -void __init prom_free_prom_memory(void) -{ -} - -const char *get_system_type(void) -{ - return "Toshiba RBTX4927/RBTX4937"; -} - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c deleted file mode 100644 index 185f303c0e2a..000000000000 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c +++ /dev/null @@ -1,703 +0,0 @@ -/* - * Toshiba rbtx4927 specific setup - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2000 RidgeRun, Inc. - * Author: RidgeRun, Inc. - * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com - * - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * Copyright 2002 MontaVista Software Inc. - * Author: Michael Pruznick, michael_pruznick@mvista.com - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * Copyright (C) 2004 MontaVista Software Inc. - * Author: Manish Lachwani, mlachwani@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_TOSHIBA_FPCIB0 -#include -#endif -#include -#ifdef CONFIG_SERIAL_TXX9 -#include -#endif - -/* These functions are used for rebooting or halting the machine*/ -extern void toshiba_rbtx4927_restart(char *command); -extern void toshiba_rbtx4927_halt(void); -extern void toshiba_rbtx4927_power_off(void); - -int tx4927_using_backplane = 0; - -extern void toshiba_rbtx4927_irq_setup(void); - -char *prom_getcmdline(void); - -#ifdef CONFIG_PCI -#undef TX4927_SUPPORT_COMMAND_IO -#undef TX4927_SUPPORT_PCI_66 -int tx4927_cpu_clock = 100000000; /* 100MHz */ -unsigned long mips_pci_io_base; -unsigned long mips_pci_io_size; -unsigned long mips_pci_mem_base; -unsigned long mips_pci_mem_size; -/* for legacy I/O, PCI I/O PCI Bus address must be 0 */ -unsigned long mips_pci_io_pciaddr = 0; -unsigned long mips_memory_upper; -static int tx4927_ccfg_toeon = 1; -static int tx4927_pcic_trdyto = 0; /* default: disabled */ -unsigned long tx4927_ce_base[8]; -int tx4927_pci66 = 0; /* 0:auto */ -#endif - -char *toshiba_name = ""; - -#ifdef CONFIG_PCI -extern struct pci_controller tx4927_controller; - -static struct pci_dev *fake_pci_dev(struct pci_controller *hose, - int top_bus, int busnr, int devfn) -{ - static struct pci_dev dev; - static struct pci_bus bus; - - dev.sysdata = (void *)hose; - dev.devfn = devfn; - bus.number = busnr; - bus.ops = hose->pci_ops; - bus.parent = NULL; - dev.bus = &bus; - - return &dev; -} - -#define EARLY_PCI_OP(rw, size, type) \ -static int early_##rw##_config_##size(struct pci_controller *hose, \ - int top_bus, int bus, int devfn, int offset, type value) \ -{ \ - return pci_##rw##_config_##size( \ - fake_pci_dev(hose, top_bus, bus, devfn), \ - offset, value); \ -} - -EARLY_PCI_OP(read, byte, u8 *) -EARLY_PCI_OP(read, dword, u32 *) -EARLY_PCI_OP(write, byte, u8) -EARLY_PCI_OP(write, dword, u32) - -static int __init tx4927_pcibios_init(void) -{ - unsigned int id; - u32 pci_devfn; - int devfn_start = 0; - int devfn_stop = 0xff; - int busno = 0; /* One bus on the Toshiba */ - struct pci_controller *hose = &tx4927_controller; - - for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) { - early_read_config_dword(hose, busno, busno, pci_devfn, - PCI_VENDOR_ID, &id); - - if (id == 0xffffffff) { - continue; - } - - if (id == 0x94601055) { - u8 v08_64; - u32 v32_b0; - u8 v08_e1; - - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x64, &v08_64); - early_read_config_dword(hose, busno, busno, - pci_devfn, 0xb0, &v32_b0); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0xe1, &v08_e1); - - /* serial irq control */ - v08_64 = 0xd0; - - /* serial irq pin */ - v32_b0 |= 0x00010000; - - /* ide irq on isa14 */ - v08_e1 &= 0xf0; - v08_e1 |= 0x0d; - - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x64, v08_64); - early_write_config_dword(hose, busno, busno, - pci_devfn, 0xb0, v32_b0); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0xe1, v08_e1); - } - - if (id == 0x91301055) { - u8 v08_04; - u8 v08_09; - u8 v08_41; - u8 v08_43; - u8 v08_5c; - - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x04, &v08_04); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x09, &v08_09); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x41, &v08_41); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x43, &v08_43); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x5c, &v08_5c); - - /* enable ide master/io */ - v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO); - - /* enable ide native mode */ - v08_09 |= 0x05; - - /* enable primary ide */ - v08_41 |= 0x80; - - /* enable secondary ide */ - v08_43 |= 0x80; - - /* - * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! - * - * This line of code is intended to provide the user with a work - * around solution to the anomalies cited in SMSC's anomaly sheet - * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"". - * - * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! - */ - v08_5c |= 0x01; - - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x5c, v08_5c); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x04, v08_04); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x09, v08_09); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x41, v08_41); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x43, v08_43); - } - - } - - register_pci_controller(&tx4927_controller); - return 0; -} - -arch_initcall(tx4927_pcibios_init); - -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; - -void __init tx4927_pci_setup(void) -{ - static int called = 0; - extern unsigned int tx4927_get_mem_size(void); - - mips_memory_upper = tx4927_get_mem_size() << 20; - mips_memory_upper += KSEG0; - mips_pci_io_base = TX4927_PCIIO; - mips_pci_io_size = TX4927_PCIIO_SIZE; - mips_pci_mem_base = TX4927_PCIMEM; - mips_pci_mem_size = TX4927_PCIMEM_SIZE; - - if (!called) { - printk - ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", - toshiba_name, - (unsigned short) (tx4927_pcicptr->pciid >> 16), - (unsigned short) (tx4927_pcicptr->pciid & 0xffff), - (unsigned short) (tx4927_pcicptr->pciccrev & 0xff), - (!(tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIXARB)) ? "External" : - "Internal"); - called = 1; - } - printk("%s PCIC --%s PCICLK:", toshiba_name, - (tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : ""); - if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) { - int pciclk = 0; - if (mips_machtype == MACH_TOSHIBA_RBTX4937) - switch ((unsigned long) tx4927_ccfgptr-> - ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { - case TX4937_CCFG_PCIDIVMODE_4: - pciclk = tx4927_cpu_clock / 4; - break; - case TX4937_CCFG_PCIDIVMODE_4_5: - pciclk = tx4927_cpu_clock * 2 / 9; - break; - case TX4937_CCFG_PCIDIVMODE_5: - pciclk = tx4927_cpu_clock / 5; - break; - case TX4937_CCFG_PCIDIVMODE_5_5: - pciclk = tx4927_cpu_clock * 2 / 11; - break; - case TX4937_CCFG_PCIDIVMODE_8: - pciclk = tx4927_cpu_clock / 8; - break; - case TX4937_CCFG_PCIDIVMODE_9: - pciclk = tx4927_cpu_clock / 9; - break; - case TX4937_CCFG_PCIDIVMODE_10: - pciclk = tx4927_cpu_clock / 10; - break; - case TX4937_CCFG_PCIDIVMODE_11: - pciclk = tx4927_cpu_clock / 11; - break; - } - - else - switch ((unsigned long) tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { - case TX4927_CCFG_PCIDIVMODE_2_5: - pciclk = tx4927_cpu_clock * 2 / 5; - break; - case TX4927_CCFG_PCIDIVMODE_3: - pciclk = tx4927_cpu_clock / 3; - break; - case TX4927_CCFG_PCIDIVMODE_5: - pciclk = tx4927_cpu_clock / 5; - break; - case TX4927_CCFG_PCIDIVMODE_6: - pciclk = tx4927_cpu_clock / 6; - break; - } - - printk("Internal(%dMHz)", pciclk / 1000000); - } else - printk("External"); - printk("\n"); - - /* GB->PCI mappings */ - tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4; - tx4927_pcicptr->g2piogbase = mips_pci_io_base | -#ifdef __BIG_ENDIAN - TX4927_PCIC_G2PIOGBASE_ECHG -#else - TX4927_PCIC_G2PIOGBASE_BSDIS -#endif - ; - - tx4927_pcicptr->g2piopbase = 0; - - tx4927_pcicptr->g2pmmask[0] = (mips_pci_mem_size - 1) >> 4; - tx4927_pcicptr->g2pmgbase[0] = mips_pci_mem_base | -#ifdef __BIG_ENDIAN - TX4927_PCIC_G2PMnGBASE_ECHG -#else - TX4927_PCIC_G2PMnGBASE_BSDIS -#endif - ; - tx4927_pcicptr->g2pmpbase[0] = mips_pci_mem_base; - - tx4927_pcicptr->g2pmmask[1] = 0; - tx4927_pcicptr->g2pmgbase[1] = 0; - tx4927_pcicptr->g2pmpbase[1] = 0; - tx4927_pcicptr->g2pmmask[2] = 0; - tx4927_pcicptr->g2pmgbase[2] = 0; - tx4927_pcicptr->g2pmpbase[2] = 0; - - - /* PCI->GB mappings (I/O 256B) */ - tx4927_pcicptr->p2giopbase = 0; /* 256B */ - - /* PCI->GB mappings (MEM 512MB) M0 gets all of memory */ - tx4927_pcicptr->p2gm0plbase = 0; - tx4927_pcicptr->p2gm0pubase = 0; - tx4927_pcicptr->p2gmgbase[0] = 0 | TX4927_PCIC_P2GMnGBASE_TMEMEN | -#ifdef __BIG_ENDIAN - TX4927_PCIC_P2GMnGBASE_TECHG -#else - TX4927_PCIC_P2GMnGBASE_TBSDIS -#endif - ; - - /* PCI->GB mappings (MEM 16MB) -not used */ - tx4927_pcicptr->p2gm1plbase = 0xffffffff; - tx4927_pcicptr->p2gm1pubase = 0xffffffff; - tx4927_pcicptr->p2gmgbase[1] = 0; - - /* PCI->GB mappings (MEM 1MB) -not used */ - tx4927_pcicptr->p2gm2pbase = 0xffffffff; - tx4927_pcicptr->p2gmgbase[2] = 0; - - - /* Enable Initiator Memory 0 Space, I/O Space, Config */ - tx4927_pcicptr->pciccfg &= TX4927_PCIC_PCICCFG_LBWC_MASK; - tx4927_pcicptr->pciccfg |= - TX4927_PCIC_PCICCFG_IMSE0 | TX4927_PCIC_PCICCFG_IISE | - TX4927_PCIC_PCICCFG_ICAE | TX4927_PCIC_PCICCFG_ATR; - - - /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ - tx4927_pcicptr->pcicfg1 = 0; - - if (tx4927_pcic_trdyto >= 0) { - tx4927_pcicptr->g2ptocnt &= ~0xff; - tx4927_pcicptr->g2ptocnt |= (tx4927_pcic_trdyto & 0xff); - } - - /* Clear All Local Bus Status */ - tx4927_pcicptr->pcicstatus = TX4927_PCIC_PCICSTATUS_ALL; - /* Enable All Local Bus Interrupts */ - tx4927_pcicptr->pcicmask = TX4927_PCIC_PCICSTATUS_ALL; - /* Clear All Initiator Status */ - tx4927_pcicptr->g2pstatus = TX4927_PCIC_G2PSTATUS_ALL; - /* Enable All Initiator Interrupts */ - tx4927_pcicptr->g2pmask = TX4927_PCIC_G2PSTATUS_ALL; - /* Clear All PCI Status Error */ - tx4927_pcicptr->pcistatus = - (tx4927_pcicptr->pcistatus & 0x0000ffff) | - (TX4927_PCIC_PCISTATUS_ALL << 16); - /* Enable All PCI Status Error Interrupts */ - tx4927_pcicptr->pcimask = TX4927_PCIC_PCISTATUS_ALL; - - /* PCIC Int => IRC IRQ16 */ - tx4927_pcicptr->pcicfg2 = - (tx4927_pcicptr->pcicfg2 & 0xffffff00) | TX4927_IR_PCIC; - - if (!(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCIXARB)) { - /* XXX */ - } else { - /* Reset Bus Arbiter */ - tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_RPBA; - /* Enable Bus Arbiter */ - tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_PBAEN; - } - - tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; -} -#endif /* CONFIG_PCI */ - -static void __noreturn wait_forever(void) -{ - while (1) - if (cpu_wait) - (*cpu_wait)(); -} - -void toshiba_rbtx4927_restart(char *command) -{ - printk(KERN_NOTICE "System Rebooting...\n"); - - /* enable the s/w reset register */ - writeb(RBTX4927_SW_RESET_ENABLE_SET, RBTX4927_SW_RESET_ENABLE); - - /* wait for enable to be seen */ - while ((readb(RBTX4927_SW_RESET_ENABLE) & - RBTX4927_SW_RESET_ENABLE_SET) == 0x00); - - /* do a s/w reset */ - writeb(RBTX4927_SW_RESET_DO_SET, RBTX4927_SW_RESET_DO); - - /* do something passive while waiting for reset */ - local_irq_disable(); - wait_forever(); - /* no return */ -} - -void toshiba_rbtx4927_halt(void) -{ - printk(KERN_NOTICE "System Halted\n"); - local_irq_disable(); - wait_forever(); - /* no return */ -} - -void toshiba_rbtx4927_power_off(void) -{ - toshiba_rbtx4927_halt(); - /* no return */ -} - -void __init plat_mem_setup(void) -{ - int i; - u32 cp0_config; - char *argptr; - - printk("CPU is %s\n", toshiba_name); - - /* f/w leaves this on at startup */ - clear_c0_status(ST0_ERL); - - /* enable caches -- HCP5 does this, pmon does not */ - cp0_config = read_c0_config(); - cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); - write_c0_config(cp0_config); - - set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET); - - ioport_resource.end = 0xffffffff; - iomem_resource.end = 0xffffffff; - - _machine_restart = toshiba_rbtx4927_restart; - _machine_halt = toshiba_rbtx4927_halt; - pm_power_off = toshiba_rbtx4927_power_off; - - for (i = 0; i < TX4927_NR_TMR; i++) - txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL); - -#ifdef CONFIG_PCI - - /* PCIC */ - /* - * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. - * - * For TX4927: - * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1). - * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5) - * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3) - * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) - * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) - * i.e. S9[3]: ON (83MHz), OFF (100MHz) - * - * For TX4937: - * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) - * PCIDIVMODE[10] is 0. - * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8) - * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4) - * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9) - * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5) - * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) - * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) - * - */ - if (mips_machtype == MACH_TOSHIBA_RBTX4937) - switch ((unsigned long)tx4927_ccfgptr-> - ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { - case TX4937_CCFG_PCIDIVMODE_8: - case TX4937_CCFG_PCIDIVMODE_4: - tx4927_cpu_clock = 266666666; /* 266MHz */ - break; - case TX4937_CCFG_PCIDIVMODE_9: - case TX4937_CCFG_PCIDIVMODE_4_5: - tx4927_cpu_clock = 300000000; /* 300MHz */ - break; - default: - tx4927_cpu_clock = 333333333; /* 333MHz */ - } - else - switch ((unsigned long)tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { - case TX4927_CCFG_PCIDIVMODE_2_5: - case TX4927_CCFG_PCIDIVMODE_5: - tx4927_cpu_clock = 166666666; /* 166MHz */ - break; - default: - tx4927_cpu_clock = 200000000; /* 200MHz */ - } - - /* CCFG */ - /* do reset on watchdog */ - tx4927_ccfgptr->ccfg |= TX4927_CCFG_WR; - /* enable Timeout BusError */ - if (tx4927_ccfg_toeon) - tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE; - - tx4927_pci_setup(); - if (tx4927_using_backplane == 1) - printk("backplane board IS installed\n"); - else - printk("No Backplane \n"); - - /* this is on ISA bus behind PCI bus, so need PCI up first */ -#ifdef CONFIG_TOSHIBA_FPCIB0 - if (tx4927_using_backplane) { - smsc_fdc37m81x_init(0x3f0); - smsc_fdc37m81x_config_beg(); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, - SMSC_FDC37M81X_KBD); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, - 1); - smsc_fdc37m81x_config_end(); - } -#endif -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_SERIAL_TXX9 - { - extern int early_serial_txx9_setup(struct uart_port *port); - struct uart_port req; - for(i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (char *)(0xff1ff300 + i * 0x100); - req.mapbase = 0xff1ff300 + i * 0x100; - req.irq = TX4927_IRQ_PIC_BEG + 8 + i; - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = 50000000; - early_serial_txx9_setup(&req); - } - } -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (strstr(argptr, "console=") == NULL) { - strcat(argptr, " console=ttyS0,38400"); - } -#endif -#endif - -#ifdef CONFIG_ROOT_NFS - argptr = prom_getcmdline(); - if (strstr(argptr, "root=") == NULL) { - strcat(argptr, " root=/dev/nfs rw"); - } -#endif - -#ifdef CONFIG_IP_PNP - argptr = prom_getcmdline(); - if (strstr(argptr, "ip=") == NULL) { - strcat(argptr, " ip=any"); - } -#endif -} - -void __init plat_time_init(void) -{ - mips_hpt_frequency = tx4927_cpu_clock / 2; - if (tx4927_ccfgptr->ccfg & TX4927_CCFG_TINTDIS) - txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL, - TXX9_IRQ_BASE + 17, - 50000000); -} - -static int __init toshiba_rbtx4927_rtc_init(void) -{ - static struct resource __initdata res = { - .start = 0x1c010000, - .end = 0x1c010000 + 0x800 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("rtc-ds1742", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} -device_initcall(toshiba_rbtx4927_rtc_init); - -static int __init rbtx4927_ne_init(void) -{ - static struct resource __initdata res[] = { - { - .start = RBTX4927_RTL_8019_BASE, - .end = RBTX4927_RTL_8019_BASE + 0x20 - 1, - .flags = IORESOURCE_IO, - }, { - .start = RBTX4927_RTL_8019_IRQ, - .flags = IORESOURCE_IRQ, - } - }; - struct platform_device *dev = - platform_device_register_simple("ne", -1, - res, ARRAY_SIZE(res)); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} -device_initcall(rbtx4927_ne_init); - -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init rbtx4927_wdt_init(void) -{ - return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); -} -device_initcall(rbtx4927_wdt_init); - -/* Minimum CLK support */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "imbus_clk")) - return (struct clk *)50000000; - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return (unsigned long)clk; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/tx4938/Kconfig b/arch/mips/tx4938/Kconfig deleted file mode 100644 index d90e9cd85138..000000000000 --- a/arch/mips/tx4938/Kconfig +++ /dev/null @@ -1,24 +0,0 @@ -if TOSHIBA_RBTX4938 - -comment "Multiplex Pin Select" -choice - prompt "PIO[58:61]" - default TOSHIBA_RBTX4938_MPLEX_PIO58_61 - -config TOSHIBA_RBTX4938_MPLEX_PIO58_61 - bool "PIO" -config TOSHIBA_RBTX4938_MPLEX_NAND - bool "NAND" -config TOSHIBA_RBTX4938_MPLEX_ATA - bool "ATA" - -endchoice - -config TX4938_NAND_BOOT - depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND - bool "NAND Boot Support (EXPERIMENTAL)" - help - This is only for Toshiba RBTX4938 reference board, which has NAND IPL. - Select this option if you need to use NAND boot. - -endif diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile deleted file mode 100644 index 56aa1ed1ee0c..000000000000 --- a/arch/mips/tx4938/common/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for common code for Toshiba TX4927 based systems -# - -obj-y += prom.o irq.o -obj-$(CONFIG_KGDB) += dbgio.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4938/common/dbgio.c b/arch/mips/tx4938/common/dbgio.c deleted file mode 100644 index 33b9c672a322..000000000000 --- a/arch/mips/tx4938/common/dbgio.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/dbgio.c - * - * kgdb interface for gdb - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Support for TX4938 in 2.6 - Hiroshi DOYU - */ - -#include - -extern u8 txx9_sio_kdbg_rd(void); -extern int txx9_sio_kdbg_wr( u8 ch ); - -u8 getDebugChar(void) -{ - return (txx9_sio_kdbg_rd()); -} - -int putDebugChar(u8 byte) -{ - return (txx9_sio_kdbg_wr(byte)); -} - diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c deleted file mode 100644 index c059b899d120..000000000000 --- a/arch/mips/tx4938/common/irq.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/irq.c - * - * Common tx4938 irq handler - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include -#include - -void __init -tx4938_irq_init(void) -{ - mips_cpu_irq_init(); - txx9_irq_init(TX4938_IRC_REG); - set_irq_chained_handler(TX4938_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); -} - -int toshiba_rbtx4938_irq_nested(int irq); - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status(); - - if (pending & STATUSF_IP7) - do_IRQ(TX4938_IRQ_CPU_TIMER); - else if (pending & STATUSF_IP2) { - int irq = txx9_irq(); - if (irq == TX4938_IRQ_PIC_BEG + TX4938_IR_INT(0)) - irq = toshiba_rbtx4938_irq_nested(irq); - if (irq >= 0) - do_IRQ(irq); - else - spurious_interrupt(); - } else if (pending & STATUSF_IP1) - do_IRQ(TX4938_IRQ_USER1); - else if (pending & STATUSF_IP0) - do_IRQ(TX4938_IRQ_USER0); -} diff --git a/arch/mips/tx4938/common/prom.c b/arch/mips/tx4938/common/prom.c deleted file mode 100644 index 20baeaeba4cd..000000000000 --- a/arch/mips/tx4938/common/prom.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/prom.c - * - * common tx4938 memory interface - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ - -#include -#include -#include - -static unsigned int __init -tx4938_process_sdccr(u64 * addr) -{ - u64 val; - unsigned int sdccr_ce; - unsigned int sdccr_rs; - unsigned int sdccr_cs; - unsigned int sdccr_mw; - unsigned int rs = 0; - unsigned int cs = 0; - unsigned int mw = 0; - unsigned int bc = 4; - unsigned int msize = 0; - - val = ____raw_readq((void __iomem *)addr); - - /* MVMCP -- need #defs for these bits masks */ - sdccr_ce = ((val & (1 << 10)) >> 10); - sdccr_rs = ((val & (3 << 5)) >> 5); - sdccr_cs = ((val & (7 << 2)) >> 2); - sdccr_mw = ((val & (1 << 0)) >> 0); - - if (sdccr_ce) { - switch (sdccr_rs) { - case 0:{ - rs = 2048; - break; - } - case 1:{ - rs = 4096; - break; - } - case 2:{ - rs = 8192; - break; - } - default:{ - rs = 0; - break; - } - } - switch (sdccr_cs) { - case 0:{ - cs = 256; - break; - } - case 1:{ - cs = 512; - break; - } - case 2:{ - cs = 1024; - break; - } - case 3:{ - cs = 2048; - break; - } - case 4:{ - cs = 4096; - break; - } - default:{ - cs = 0; - break; - } - } - switch (sdccr_mw) { - case 0:{ - mw = 8; - break; - } /* 8 bytes = 64 bits */ - case 1:{ - mw = 4; - break; - } /* 4 bytes = 32 bits */ - } - } - - /* bytes per chip MB per chip bank count */ - msize = (((rs * cs * mw) / (1024 * 1024)) * (bc)); - - /* MVMCP -- bc hard coded to 4 from table 9.3.1 */ - /* boad supports bc=2 but no way to detect */ - - return (msize); -} - -unsigned int __init -tx4938_get_mem_size(void) -{ - unsigned int c0; - unsigned int c1; - unsigned int c2; - unsigned int c3; - unsigned int total; - - /* MVMCP -- need #defs for these registers */ - c0 = tx4938_process_sdccr((u64 *) 0xff1f8000); - c1 = tx4938_process_sdccr((u64 *) 0xff1f8008); - c2 = tx4938_process_sdccr((u64 *) 0xff1f8010); - c3 = tx4938_process_sdccr((u64 *) 0xff1f8018); - total = c0 + c1 + c2 + c3; - - return (total); -} diff --git a/arch/mips/tx4938/toshiba_rbtx4938/Makefile b/arch/mips/tx4938/toshiba_rbtx4938/Makefile deleted file mode 100644 index 2316dd7dd1bd..000000000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for common code for Toshiba TX4927 based systems -# - -obj-y += prom.o setup.o irq.o spi_eeprom.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c deleted file mode 100644 index 4d6a8dc46c76..000000000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * linux/arch/mips/tx4938/toshiba_rbtx4938/irq.c - * - * Toshiba RBTX4938 specific interrupt handlers - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ - -/* -IRQ Device - -16 TX4938-CP0/00 Software 0 -17 TX4938-CP0/01 Software 1 -18 TX4938-CP0/02 Cascade TX4938-CP0 -19 TX4938-CP0/03 Multiplexed -- do not use -20 TX4938-CP0/04 Multiplexed -- do not use -21 TX4938-CP0/05 Multiplexed -- do not use -22 TX4938-CP0/06 Multiplexed -- do not use -23 TX4938-CP0/07 CPU TIMER - -24 TX4938-PIC/00 -25 TX4938-PIC/01 -26 TX4938-PIC/02 Cascade RBTX4938-IOC -27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet -28 TX4938-PIC/04 -29 TX4938-PIC/05 TX4938 ETH1 -30 TX4938-PIC/06 TX4938 ETH0 -31 TX4938-PIC/07 -32 TX4938-PIC/08 TX4938 SIO 0 -33 TX4938-PIC/09 TX4938 SIO 1 -34 TX4938-PIC/10 TX4938 DMA0 -35 TX4938-PIC/11 TX4938 DMA1 -36 TX4938-PIC/12 TX4938 DMA2 -37 TX4938-PIC/13 TX4938 DMA3 -38 TX4938-PIC/14 -39 TX4938-PIC/15 -40 TX4938-PIC/16 TX4938 PCIC -41 TX4938-PIC/17 TX4938 TMR0 -42 TX4938-PIC/18 TX4938 TMR1 -43 TX4938-PIC/19 TX4938 TMR2 -44 TX4938-PIC/20 -45 TX4938-PIC/21 -46 TX4938-PIC/22 TX4938 PCIERR -47 TX4938-PIC/23 -48 TX4938-PIC/24 -49 TX4938-PIC/25 -50 TX4938-PIC/26 -51 TX4938-PIC/27 -52 TX4938-PIC/28 -53 TX4938-PIC/29 -54 TX4938-PIC/30 -55 TX4938-PIC/31 TX4938 SPI - -56 RBTX4938-IOC/00 PCI-D -57 RBTX4938-IOC/01 PCI-C -58 RBTX4938-IOC/02 PCI-B -59 RBTX4938-IOC/03 PCI-A -60 RBTX4938-IOC/04 RTC -61 RBTX4938-IOC/05 ATA -62 RBTX4938-IOC/06 MODEM -63 RBTX4938-IOC/07 SWINT -*/ -#include -#include -#include - -static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq); -static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq); - -#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC" -static struct irq_chip toshiba_rbtx4938_irq_ioc_type = { - .name = TOSHIBA_RBTX4938_IOC_NAME, - .ack = toshiba_rbtx4938_irq_ioc_disable, - .mask = toshiba_rbtx4938_irq_ioc_disable, - .mask_ack = toshiba_rbtx4938_irq_ioc_disable, - .unmask = toshiba_rbtx4938_irq_ioc_enable, -}; - -int -toshiba_rbtx4938_irq_nested(int sw_irq) -{ - u8 level3; - - level3 = readb(rbtx4938_imstat_addr); - if (level3) - /* must use fls so onboard ATA has priority */ - sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1; - - return sw_irq; -} - -static struct irqaction toshiba_rbtx4938_irq_ioc_action = { - .handler = no_action, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = TOSHIBA_RBTX4938_IOC_NAME, -}; - -/**********************************************************************************/ -/* Functions for ioc */ -/**********************************************************************************/ -static void __init -toshiba_rbtx4938_irq_ioc_init(void) -{ - int i; - - for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG; - i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++) - set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type, - handle_level_irq); - - setup_irq(RBTX4938_IRQ_IOCINT, - &toshiba_rbtx4938_irq_ioc_action); -} - -static void -toshiba_rbtx4938_irq_ioc_enable(unsigned int irq) -{ - unsigned char v; - - v = readb(rbtx4938_imask_addr); - v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); - writeb(v, rbtx4938_imask_addr); - mmiowb(); -} - -static void -toshiba_rbtx4938_irq_ioc_disable(unsigned int irq) -{ - unsigned char v; - - v = readb(rbtx4938_imask_addr); - v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); - writeb(v, rbtx4938_imask_addr); - mmiowb(); -} - -void __init arch_init_irq(void) -{ - extern void tx4938_irq_init(void); - - /* Now, interrupt control disabled, */ - /* all IRC interrupts are masked, */ - /* all IRC interrupt mode are Low Active. */ - - /* mask all IOC interrupts */ - writeb(0, rbtx4938_imask_addr); - - /* clear SoftInt interrupts */ - writeb(0, rbtx4938_softint_addr); - tx4938_irq_init(); - toshiba_rbtx4938_irq_ioc_init(); - /* Onboard 10M Ether: High Active */ - set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH); -} diff --git a/arch/mips/tx4938/toshiba_rbtx4938/prom.c b/arch/mips/tx4938/toshiba_rbtx4938/prom.c deleted file mode 100644 index 1644bffa501a..000000000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/prom.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/arch/mips/tx4938/toshiba_rbtx4938/prom.c - * - * rbtx4938 specific prom routines - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ - -#include -#include -#include -#include - -#include -#include -#include - -void __init prom_init_cmdline(void) -{ - int argc = (int) fw_arg0; - char **argv = (char **) fw_arg1; - int i; - - /* ignore all built-in args if any f/w args given */ - if (argc > 1) { - *arcs_cmdline = '\0'; - } - - for (i = 1; i < argc; i++) { - if (i != 1) { - strcat(arcs_cmdline, " "); - } - strcat(arcs_cmdline, argv[i]); - } -} - -void __init prom_init(void) -{ - extern int tx4938_get_mem_size(void); - int msize; -#ifndef CONFIG_TX4938_NAND_BOOT - prom_init_cmdline(); -#endif - - msize = tx4938_get_mem_size(); - add_memory_region(0, msize << 20, BOOT_MEM_RAM); - - return; -} - -void __init prom_free_prom_memory(void) -{ -} - -void __init prom_fixup_mem_map(unsigned long start, unsigned long end) -{ - return; -} - -const char *get_system_type(void) -{ - return "Toshiba RBTX4938"; -} - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c deleted file mode 100644 index 3a3659e8633a..000000000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c +++ /dev/null @@ -1,1124 +0,0 @@ -/* - * linux/arch/mips/tx4938/toshiba_rbtx4938/setup.c - * - * Setup pointers to hardware-dependent routines. - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_SERIAL_TXX9 -#include -#endif -#include -#include -#include - -extern char * __init prom_getcmdline(void); -static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr); - -/* These functions are used for rebooting or halting the machine*/ -extern void rbtx4938_machine_restart(char *command); -extern void rbtx4938_machine_halt(void); -extern void rbtx4938_machine_power_off(void); - -/* clocks */ -unsigned int txx9_master_clock; -unsigned int txx9_cpu_clock; -unsigned int txx9_gbus_clock; - -unsigned long rbtx4938_ce_base[8]; -unsigned long rbtx4938_ce_size[8]; -int txboard_pci66_mode; -static int tx4938_pcic_trdyto; /* default: disabled */ -static int tx4938_pcic_retryto; /* default: disabled */ -static int tx4938_ccfg_toeon = 1; - -struct tx4938_pcic_reg *pcicptrs[4] = { - tx4938_pcicptr /* default setting for TX4938 */ -}; - -static struct { - unsigned long base; - unsigned long size; -} phys_regions[16] __initdata; -static int num_phys_regions __initdata; - -#define PHYS_REGION_MINSIZE 0x10000 - -void rbtx4938_machine_halt(void) -{ - printk(KERN_NOTICE "System Halted\n"); - local_irq_disable(); - - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -void rbtx4938_machine_power_off(void) -{ - rbtx4938_machine_halt(); - /* no return */ -} - -void rbtx4938_machine_restart(char *command) -{ - local_irq_disable(); - - printk("Rebooting..."); - writeb(1, rbtx4938_softresetlock_addr); - writeb(1, rbtx4938_sfvol_addr); - writeb(1, rbtx4938_softreset_addr); - while(1) - ; -} - -void __init -txboard_add_phys_region(unsigned long base, unsigned long size) -{ - if (num_phys_regions >= ARRAY_SIZE(phys_regions)) { - printk("phys_region overflow\n"); - return; - } - phys_regions[num_phys_regions].base = base; - phys_regions[num_phys_regions].size = size; - num_phys_regions++; -} -unsigned long __init -txboard_find_free_phys_region(unsigned long begin, unsigned long end, - unsigned long size) -{ - unsigned long base; - int i; - - for (base = begin / size * size; base < end; base += size) { - for (i = 0; i < num_phys_regions; i++) { - if (phys_regions[i].size && - base <= phys_regions[i].base + (phys_regions[i].size - 1) && - base + (size - 1) >= phys_regions[i].base) - break; - } - if (i == num_phys_regions) - return base; - } - return 0; -} -unsigned long __init -txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end, - unsigned long *size) -{ - unsigned long sz, base; - for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) { - base = txboard_find_free_phys_region(begin, end, sz); - if (base) { - *size = sz; - return base; - } - } - return 0; -} -unsigned long __init -txboard_request_phys_region_range(unsigned long begin, unsigned long end, - unsigned long size) -{ - unsigned long base; - base = txboard_find_free_phys_region(begin, end, size); - if (base) - txboard_add_phys_region(base, size); - return base; -} -unsigned long __init -txboard_request_phys_region(unsigned long size) -{ - unsigned long base; - unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ - base = txboard_find_free_phys_region(begin, end, size); - if (base) - txboard_add_phys_region(base, size); - return base; -} -unsigned long __init -txboard_request_phys_region_shrink(unsigned long *size) -{ - unsigned long base; - unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ - base = txboard_find_free_phys_region_shrink(begin, end, size); - if (base) - txboard_add_phys_region(base, *size); - return base; -} - -#ifdef CONFIG_PCI -void __init -tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr, - struct pci_controller *channel, - unsigned long pci_io_base, - int extarb) -{ - int i; - - /* Disable All Initiator Space */ - pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)| - TX4938_PCIC_PCICCFG_G2PMEN(1)| - TX4938_PCIC_PCICCFG_G2PMEN(2)| - TX4938_PCIC_PCICCFG_G2PIOEN); - - /* GB->PCI mappings */ - pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4; - pcicptr->g2piogbase = pci_io_base | -#ifdef __BIG_ENDIAN - TX4938_PCIC_G2PIOGBASE_ECHG -#else - TX4938_PCIC_G2PIOGBASE_BSDIS -#endif - ; - pcicptr->g2piopbase = 0; - for (i = 0; i < 3; i++) { - pcicptr->g2pmmask[i] = 0; - pcicptr->g2pmgbase[i] = 0; - pcicptr->g2pmpbase[i] = 0; - } - if (channel->mem_resource->end) { - pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4; - pcicptr->g2pmgbase[0] = channel->mem_resource->start | -#ifdef __BIG_ENDIAN - TX4938_PCIC_G2PMnGBASE_ECHG -#else - TX4938_PCIC_G2PMnGBASE_BSDIS -#endif - ; - pcicptr->g2pmpbase[0] = channel->mem_resource->start; - } - /* PCI->GB mappings (I/O 256B) */ - pcicptr->p2giopbase = 0; /* 256B */ - pcicptr->p2giogbase = 0; - /* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */ - pcicptr->p2gm0plbase = 0; - pcicptr->p2gm0pubase = 0; - pcicptr->p2gmgbase[0] = 0 | - TX4938_PCIC_P2GMnGBASE_TMEMEN | -#ifdef __BIG_ENDIAN - TX4938_PCIC_P2GMnGBASE_TECHG -#else - TX4938_PCIC_P2GMnGBASE_TBSDIS -#endif - ; - /* PCI->GB mappings (MEM 16MB) */ - pcicptr->p2gm1plbase = 0xffffffff; - pcicptr->p2gm1pubase = 0xffffffff; - pcicptr->p2gmgbase[1] = 0; - /* PCI->GB mappings (MEM 1MB) */ - pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */ - pcicptr->p2gmgbase[2] = 0; - - pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK; - /* Enable Initiator Memory Space */ - if (channel->mem_resource->end) - pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0); - /* Enable Initiator I/O Space */ - if (channel->io_resource->end) - pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN; - /* Enable Initiator Config */ - pcicptr->pciccfg |= - TX4938_PCIC_PCICCFG_ICAEN | - TX4938_PCIC_PCICCFG_TCAR; - - /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ - pcicptr->pcicfg1 = 0; - - pcicptr->g2ptocnt &= ~0xffff; - - if (tx4938_pcic_trdyto >= 0) { - pcicptr->g2ptocnt &= ~0xff; - pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff); - } - - if (tx4938_pcic_retryto >= 0) { - pcicptr->g2ptocnt &= ~0xff00; - pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00); - } - - /* Clear All Local Bus Status */ - pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL; - /* Enable All Local Bus Interrupts */ - pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL; - /* Clear All Initiator Status */ - pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL; - /* Enable All Initiator Interrupts */ - pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL; - /* Clear All PCI Status Error */ - pcicptr->pcistatus = - (pcicptr->pcistatus & 0x0000ffff) | - (TX4938_PCIC_PCISTATUS_ALL << 16); - /* Enable All PCI Status Error Interrupts */ - pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL; - - if (!extarb) { - /* Reset Bus Arbiter */ - pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA; - pcicptr->pbabm = 0; - /* Enable Bus Arbiter */ - pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN; - } - - /* PCIC Int => IRC IRQ16 */ - pcicptr->pcicfg2 = - (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC; - - pcicptr->pcistatus = PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; -} - -int __init -tx4938_report_pciclk(void) -{ - unsigned long pcode = TX4938_REV_PCODE(); - int pciclk = 0; - printk("TX%lx PCIC --%s PCICLK:", - pcode, - (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : ""); - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { - - switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) { - case TX4938_CCFG_PCIDIVMODE_4: - pciclk = txx9_cpu_clock / 4; break; - case TX4938_CCFG_PCIDIVMODE_4_5: - pciclk = txx9_cpu_clock * 2 / 9; break; - case TX4938_CCFG_PCIDIVMODE_5: - pciclk = txx9_cpu_clock / 5; break; - case TX4938_CCFG_PCIDIVMODE_5_5: - pciclk = txx9_cpu_clock * 2 / 11; break; - case TX4938_CCFG_PCIDIVMODE_8: - pciclk = txx9_cpu_clock / 8; break; - case TX4938_CCFG_PCIDIVMODE_9: - pciclk = txx9_cpu_clock / 9; break; - case TX4938_CCFG_PCIDIVMODE_10: - pciclk = txx9_cpu_clock / 10; break; - case TX4938_CCFG_PCIDIVMODE_11: - pciclk = txx9_cpu_clock / 11; break; - } - printk("Internal(%dMHz)", pciclk / 1000000); - } else { - printk("External"); - pciclk = -1; - } - printk("\n"); - return pciclk; -} - -void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr) -{ - pcicptrs[ch] = pcicptr; -} - -struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch) -{ - return pcicptrs[ch]; -} - -static struct pci_dev *fake_pci_dev(struct pci_controller *hose, - int top_bus, int busnr, int devfn) -{ - static struct pci_dev dev; - static struct pci_bus bus; - - dev.sysdata = bus.sysdata = hose; - dev.devfn = devfn; - bus.number = busnr; - bus.ops = hose->pci_ops; - bus.parent = NULL; - dev.bus = &bus; - - return &dev; -} - -#define EARLY_PCI_OP(rw, size, type) \ -static int early_##rw##_config_##size(struct pci_controller *hose, \ - int top_bus, int bus, int devfn, int offset, type value) \ -{ \ - return pci_##rw##_config_##size( \ - fake_pci_dev(hose, top_bus, bus, devfn), \ - offset, value); \ -} - -EARLY_PCI_OP(read, word, u16 *) - -int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus) -{ - u32 pci_devfn; - unsigned short vid; - int devfn_start = 0; - int devfn_stop = 0xff; - int cap66 = -1; - u16 stat; - - printk("PCI: Checking 66MHz capabilities...\n"); - - for (pci_devfn=devfn_start; pci_devfn 0; -} - -int __init -tx4938_pciclk66_setup(void) -{ - int pciclk; - - /* Assert M66EN */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66; - /* Double PCICLK (if possible) */ - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { - unsigned int pcidivmode = - tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK; - switch (pcidivmode) { - case TX4938_CCFG_PCIDIVMODE_8: - case TX4938_CCFG_PCIDIVMODE_4: - pcidivmode = TX4938_CCFG_PCIDIVMODE_4; - pciclk = txx9_cpu_clock / 4; - break; - case TX4938_CCFG_PCIDIVMODE_9: - case TX4938_CCFG_PCIDIVMODE_4_5: - pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5; - pciclk = txx9_cpu_clock * 2 / 9; - break; - case TX4938_CCFG_PCIDIVMODE_10: - case TX4938_CCFG_PCIDIVMODE_5: - pcidivmode = TX4938_CCFG_PCIDIVMODE_5; - pciclk = txx9_cpu_clock / 5; - break; - case TX4938_CCFG_PCIDIVMODE_11: - case TX4938_CCFG_PCIDIVMODE_5_5: - default: - pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5; - pciclk = txx9_cpu_clock * 2 / 11; - break; - } - tx4938_ccfgptr->ccfg = - (tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK) - | pcidivmode; - printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n", - (unsigned long)tx4938_ccfgptr->ccfg); - } else { - pciclk = -1; - } - return pciclk; -} - -extern struct pci_controller tx4938_pci_controller[]; -static int __init tx4938_pcibios_init(void) -{ - unsigned long mem_base[2]; - unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0, TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */ - unsigned long io_base[2]; - unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0, TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */ - /* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */ - int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB); - - PCIBIOS_MIN_IO = 0x00001000UL; - - mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]); - io_base[0] = txboard_request_phys_region_shrink(&io_size[0]); - - printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", - (unsigned short)(tx4938_pcicptr->pciid >> 16), - (unsigned short)(tx4938_pcicptr->pciid & 0xffff), - (unsigned short)(tx4938_pcicptr->pciccrev & 0xff), - extarb ? "External" : "Internal"); - - /* setup PCI area */ - tx4938_pci_controller[0].io_resource->start = io_base[0]; - tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1; - tx4938_pci_controller[0].mem_resource->start = mem_base[0]; - tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1; - - set_tx4938_pcicptr(0, tx4938_pcicptr); - - register_pci_controller(&tx4938_pci_controller[0]); - - if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) { - printk("TX4938_CCFG_PCI66 already configured\n"); - txboard_pci66_mode = -1; /* already configured */ - } - - /* Reset PCI Bus */ - writeb(0, rbtx4938_pcireset_addr); - /* Reset PCIC */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; - if (txboard_pci66_mode > 0) - tx4938_pciclk66_setup(); - mdelay(10); - /* clear PCIC reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; - writeb(1, rbtx4938_pcireset_addr); - mmiowb(); - tx4938_report_pcic_status1(tx4938_pcicptr); - - tx4938_report_pciclk(); - tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); - if (txboard_pci66_mode == 0 && - txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) { - /* Reset PCI Bus */ - writeb(0, rbtx4938_pcireset_addr); - /* Reset PCIC */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; - tx4938_pciclk66_setup(); - mdelay(10); - /* clear PCIC reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; - writeb(1, rbtx4938_pcireset_addr); - mmiowb(); - /* Reinitialize PCIC */ - tx4938_report_pciclk(); - tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); - } - - mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]); - io_base[1] = txboard_request_phys_region_shrink(&io_size[1]); - /* Reset PCIC1 */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST; - /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */ - if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD)) - tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66; - else - tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66; - mdelay(10); - /* clear PCIC1 reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; - tx4938_report_pcic_status1(tx4938_pcic1ptr); - - printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x", - (unsigned short)(tx4938_pcic1ptr->pciid >> 16), - (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff), - (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff)); - printk("%s PCICLK:%dMHz\n", - (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "", - txx9_gbus_clock / - ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) / - 1000000); - - /* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */ - tx4938_pci_controller[1].io_resource->start = - io_base[1] - io_base[0]; - tx4938_pci_controller[1].io_resource->end = - io_base[1] - io_base[0] + io_size[1] - 1; - tx4938_pci_controller[1].mem_resource->start = mem_base[1]; - tx4938_pci_controller[1].mem_resource->end = - mem_base[1] + mem_size[1] - 1; - set_tx4938_pcicptr(1, tx4938_pcic1ptr); - - register_pci_controller(&tx4938_pci_controller[1]); - - tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb); - - /* map ioport 0 to PCI I/O space address 0 */ - set_io_port_base(KSEG1 + io_base[0]); - - return 0; -} - -arch_initcall(tx4938_pcibios_init); - -#endif /* CONFIG_PCI */ - -/* SPI support */ - -/* chip select for SPI devices */ -#define SEEPROM1_CS 7 /* PIO7 */ -#define SEEPROM2_CS 0 /* IOC */ -#define SEEPROM3_CS 1 /* IOC */ -#define SRTC_CS 2 /* IOC */ - -#ifdef CONFIG_PCI -static int __init rbtx4938_ethaddr_init(void) -{ - unsigned char dat[17]; - unsigned char sum; - int i; - - /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ - if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) { - printk(KERN_ERR "seeprom: read error.\n"); - return -ENODEV; - } else { - if (strcmp(dat, "MAC") != 0) - printk(KERN_WARNING "seeprom: bad signature.\n"); - for (i = 0, sum = 0; i < sizeof(dat); i++) - sum += dat[i]; - if (sum) - printk(KERN_WARNING "seeprom: bad checksum.\n"); - } - for (i = 0; i < 2; i++) { - unsigned int id = - TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0); - struct platform_device *pdev; - if (!(tx4938_ccfgptr->pcfg & - (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL))) - continue; - pdev = platform_device_alloc("tc35815-mac", id); - if (!pdev || - platform_device_add_data(pdev, &dat[4 + 6 * i], 6) || - platform_device_add(pdev)) - platform_device_put(pdev); - } - return 0; -} -device_initcall(rbtx4938_ethaddr_init); -#endif /* CONFIG_PCI */ - -static void __init rbtx4938_spi_setup(void) -{ - /* set SPI_SEL */ - tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL; -} - -static struct resource rbtx4938_fpga_resource; - -static char pcode_str[8]; -static struct resource tx4938_reg_resource = { - .start = TX4938_REG_BASE, - .end = TX4938_REG_BASE + TX4938_REG_SIZE, - .name = pcode_str, - .flags = IORESOURCE_MEM -}; - -void __init tx4938_board_setup(void) -{ - int i; - unsigned long divmode; - int cpuclk = 0; - unsigned long pcode = TX4938_REV_PCODE(); - - ioport_resource.start = 0x1000; - ioport_resource.end = 0xffffffff; - iomem_resource.start = 0x1000; - iomem_resource.end = 0xffffffff; /* expand to 4GB */ - - sprintf(pcode_str, "TX%lx", pcode); - /* SDRAMC,EBUSC are configured by PROM */ - for (i = 0; i < 8; i++) { - if (!(tx4938_ebuscptr->cr[i] & 0x8)) - continue; /* disabled */ - rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i); - txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i)); - } - - /* clocks */ - if (txx9_master_clock) { - /* calculate gbus_clock and cpu_clock_freq from master_clock */ - divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; - switch (divmode) { - case TX4938_CCFG_DIVMODE_8: - case TX4938_CCFG_DIVMODE_10: - case TX4938_CCFG_DIVMODE_12: - case TX4938_CCFG_DIVMODE_16: - case TX4938_CCFG_DIVMODE_18: - txx9_gbus_clock = txx9_master_clock * 4; break; - default: - txx9_gbus_clock = txx9_master_clock; - } - switch (divmode) { - case TX4938_CCFG_DIVMODE_2: - case TX4938_CCFG_DIVMODE_8: - cpuclk = txx9_gbus_clock * 2; break; - case TX4938_CCFG_DIVMODE_2_5: - case TX4938_CCFG_DIVMODE_10: - cpuclk = txx9_gbus_clock * 5 / 2; break; - case TX4938_CCFG_DIVMODE_3: - case TX4938_CCFG_DIVMODE_12: - cpuclk = txx9_gbus_clock * 3; break; - case TX4938_CCFG_DIVMODE_4: - case TX4938_CCFG_DIVMODE_16: - cpuclk = txx9_gbus_clock * 4; break; - case TX4938_CCFG_DIVMODE_4_5: - case TX4938_CCFG_DIVMODE_18: - cpuclk = txx9_gbus_clock * 9 / 2; break; - } - txx9_cpu_clock = cpuclk; - } else { - if (txx9_cpu_clock == 0) { - txx9_cpu_clock = 300000000; /* 300MHz */ - } - /* calculate gbus_clock and master_clock from cpu_clock_freq */ - cpuclk = txx9_cpu_clock; - divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; - switch (divmode) { - case TX4938_CCFG_DIVMODE_2: - case TX4938_CCFG_DIVMODE_8: - txx9_gbus_clock = cpuclk / 2; break; - case TX4938_CCFG_DIVMODE_2_5: - case TX4938_CCFG_DIVMODE_10: - txx9_gbus_clock = cpuclk * 2 / 5; break; - case TX4938_CCFG_DIVMODE_3: - case TX4938_CCFG_DIVMODE_12: - txx9_gbus_clock = cpuclk / 3; break; - case TX4938_CCFG_DIVMODE_4: - case TX4938_CCFG_DIVMODE_16: - txx9_gbus_clock = cpuclk / 4; break; - case TX4938_CCFG_DIVMODE_4_5: - case TX4938_CCFG_DIVMODE_18: - txx9_gbus_clock = cpuclk * 2 / 9; break; - } - switch (divmode) { - case TX4938_CCFG_DIVMODE_8: - case TX4938_CCFG_DIVMODE_10: - case TX4938_CCFG_DIVMODE_12: - case TX4938_CCFG_DIVMODE_16: - case TX4938_CCFG_DIVMODE_18: - txx9_master_clock = txx9_gbus_clock / 4; break; - default: - txx9_master_clock = txx9_gbus_clock; - } - } - /* change default value to udelay/mdelay take reasonable time */ - loops_per_jiffy = txx9_cpu_clock / HZ / 2; - - /* CCFG */ - /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW; - /* do reset on watchdog */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_WR; - /* clear PCIC1 reset */ - if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST) - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; - - /* enable Timeout BusError */ - if (tx4938_ccfg_toeon) - tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE; - - /* DMA selection */ - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL; - - /* Use external clock for external arbiter */ - if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB)) - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL; - - printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n", - pcode_str, - cpuclk / 1000000, txx9_master_clock / 1000000, - (unsigned long)tx4938_ccfgptr->crir, - tx4938_ccfgptr->ccfg, - tx4938_ccfgptr->pcfg); - - printk("%s SDRAMC --", pcode_str); - for (i = 0; i < 4; i++) { - unsigned long long cr = tx4938_sdramcptr->cr[i]; - unsigned long ram_base, ram_size; - if (!((unsigned long)cr & 0x00000400)) - continue; /* disabled */ - ram_base = (unsigned long)(cr >> 49) << 21; - ram_size = ((unsigned long)(cr >> 33) + 1) << 21; - if (ram_base >= 0x20000000) - continue; /* high memory (ignore) */ - printk(" CR%d:%016Lx", i, cr); - txboard_add_phys_region(ram_base, ram_size); - } - printk(" TR:%09Lx\n", tx4938_sdramcptr->tr); - - /* SRAM */ - if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) { - unsigned int size = 0x800; - unsigned long base = - (tx4938_sramcptr->cr >> (39-11)) & ~(size - 1); - txboard_add_phys_region(base, size); - } - - /* TMR */ - for (i = 0; i < TX4938_NR_TMR; i++) - txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL); - - /* enable DMA */ - for (i = 0; i < 2; i++) - ____raw_writeq(TX4938_DMA_MCR_MSTEN, - (void __iomem *)(TX4938_DMA_REG(i) + 0x50)); - - /* PIO */ - __raw_writel(0, &tx4938_pioptr->maskcpu); - __raw_writel(0, &tx4938_pioptr->maskext); - - /* TX4938 internal registers */ - if (request_resource(&iomem_resource, &tx4938_reg_resource)) - printk("request resource for internal registers failed\n"); -} - -#ifdef CONFIG_PCI -static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr) -{ - unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16); - unsigned long g2pstatus = pcicptr->g2pstatus; - unsigned long pcicstatus = pcicptr->pcicstatus; - static struct { - unsigned long flag; - const char *str; - } pcistat_tbl[] = { - { PCI_STATUS_DETECTED_PARITY, "DetectedParityError" }, - { PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" }, - { PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" }, - { PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" }, - { PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" }, - { PCI_STATUS_PARITY, "MasterParityError" }, - }, g2pstat_tbl[] = { - { TX4938_PCIC_G2PSTATUS_TTOE, "TIOE" }, - { TX4938_PCIC_G2PSTATUS_RTOE, "RTOE" }, - }, pcicstat_tbl[] = { - { TX4938_PCIC_PCICSTATUS_PME, "PME" }, - { TX4938_PCIC_PCICSTATUS_TLB, "TLB" }, - { TX4938_PCIC_PCICSTATUS_NIB, "NIB" }, - { TX4938_PCIC_PCICSTATUS_ZIB, "ZIB" }, - { TX4938_PCIC_PCICSTATUS_PERR, "PERR" }, - { TX4938_PCIC_PCICSTATUS_SERR, "SERR" }, - { TX4938_PCIC_PCICSTATUS_GBE, "GBE" }, - { TX4938_PCIC_PCICSTATUS_IWB, "IWB" }, - }; - int i; - - printk("pcistat:%04x(", pcistatus); - for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++) - if (pcistatus & pcistat_tbl[i].flag) - printk("%s ", pcistat_tbl[i].str); - printk("), g2pstatus:%08lx(", g2pstatus); - for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++) - if (g2pstatus & g2pstat_tbl[i].flag) - printk("%s ", g2pstat_tbl[i].str); - printk("), pcicstatus:%08lx(", pcicstatus); - for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++) - if (pcicstatus & pcicstat_tbl[i].flag) - printk("%s ", pcicstat_tbl[i].str); - printk(")\n"); -} - -void tx4938_report_pcic_status(void) -{ - int i; - struct tx4938_pcic_reg *pcicptr; - for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++) - tx4938_report_pcic_status1(pcicptr); -} - -#endif /* CONFIG_PCI */ - -void __init plat_time_init(void) -{ - mips_hpt_frequency = txx9_cpu_clock / 2; - if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS) - txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL, - TXX9_IRQ_BASE + TX4938_IR_TMR(0), - txx9_gbus_clock / 2); -} - -void __init plat_mem_setup(void) -{ - unsigned long long pcfg; - char *argptr; - - iomem_resource.end = 0xffffffff; /* 4GB */ - - if (txx9_master_clock == 0) - txx9_master_clock = 25000000; /* 25MHz */ - tx4938_board_setup(); -#ifndef CONFIG_PCI - set_io_port_base(RBTX4938_ETHER_BASE); -#endif - -#ifdef CONFIG_SERIAL_TXX9 - { - extern int early_serial_txx9_setup(struct uart_port *port); - int i; - struct uart_port req; - for(i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (char *)(0xff1ff300 + i * 0x100); - req.mapbase = 0xff1ff300 + i * 0x100; - req.irq = RBTX4938_IRQ_IRC_SIO(i); - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = 50000000; - early_serial_txx9_setup(&req); - } - } -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (strstr(argptr, "console=") == NULL) { - strcat(argptr, " console=ttyS0,38400"); - } -#endif -#endif - -#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 - printk("PIOSEL: disabling both ata and nand selection\n"); - local_irq_disable(); - tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); -#endif - -#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND - printk("PIOSEL: enabling nand selection\n"); - tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL; - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL; -#endif - -#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA - printk("PIOSEL: enabling ata selection\n"); - tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL; - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL; -#endif - -#ifdef CONFIG_IP_PNP - argptr = prom_getcmdline(); - if (strstr(argptr, "ip=") == NULL) { - strcat(argptr, " ip=any"); - } -#endif - - -#ifdef CONFIG_FB - { - conswitchp = &dummy_con; - } -#endif - - rbtx4938_spi_setup(); - pcfg = tx4938_ccfgptr->pcfg; /* updated */ - /* fixup piosel */ - if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == - TX4938_PCFG_ATA_SEL) - writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04, - rbtx4938_piosel_addr); - else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == - TX4938_PCFG_NDF_SEL) - writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08, - rbtx4938_piosel_addr); - else - writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04), - rbtx4938_piosel_addr); - - rbtx4938_fpga_resource.name = "FPGA Registers"; - rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR); - rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff; - rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY; - if (request_resource(&iomem_resource, &rbtx4938_fpga_resource)) - printk("request resource for fpga failed\n"); - - _machine_restart = rbtx4938_machine_restart; - _machine_halt = rbtx4938_machine_halt; - pm_power_off = rbtx4938_machine_power_off; - - writeb(0xff, rbtx4938_led_addr); - printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", - readb(rbtx4938_fpga_rev_addr), - readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr)); -} - -static int __init rbtx4938_ne_init(void) -{ - struct resource res[] = { - { - .start = RBTX4938_RTL_8019_BASE, - .end = RBTX4938_RTL_8019_BASE + 0x20 - 1, - .flags = IORESOURCE_IO, - }, { - .start = RBTX4938_RTL_8019_IRQ, - .flags = IORESOURCE_IRQ, - } - }; - struct platform_device *dev = - platform_device_register_simple("ne", -1, - res, ARRAY_SIZE(res)); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} -device_initcall(rbtx4938_ne_init); - -/* GPIO support */ - -int gpio_to_irq(unsigned gpio) -{ - return -EINVAL; -} - -int irq_to_gpio(unsigned irq) -{ - return -EINVAL; -} - -static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock); - -static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset, - int value) -{ - u8 val; - unsigned long flags; - spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags); - val = readb(rbtx4938_spics_addr); - if (value) - val |= 1 << offset; - else - val &= ~(1 << offset); - writeb(val, rbtx4938_spics_addr); - mmiowb(); - spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags); -} - -static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip, - unsigned int offset, int value) -{ - rbtx4938_spi_gpio_set(chip, offset, value); - return 0; -} - -static struct gpio_chip rbtx4938_spi_gpio_chip = { - .set = rbtx4938_spi_gpio_set, - .direction_output = rbtx4938_spi_gpio_dir_out, - .label = "RBTX4938-SPICS", - .base = 16, - .ngpio = 3, -}; - -/* SPI support */ - -static void __init txx9_spi_init(unsigned long base, int irq) -{ - struct resource res[] = { - { - .start = base, - .end = base + 0x20 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = irq, - .flags = IORESOURCE_IRQ, - }, - }; - platform_device_register_simple("spi_txx9", 0, - res, ARRAY_SIZE(res)); -} - -static int __init rbtx4938_spi_init(void) -{ - struct spi_board_info srtc_info = { - .modalias = "rtc-rs5c348", - .max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */ - .bus_num = 0, - .chip_select = 16 + SRTC_CS, - /* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS */ - .mode = SPI_MODE_1 | SPI_CS_HIGH, - }; - spi_register_board_info(&srtc_info, 1); - spi_eeprom_register(SEEPROM1_CS); - spi_eeprom_register(16 + SEEPROM2_CS); - spi_eeprom_register(16 + SEEPROM3_CS); - gpio_request(16 + SRTC_CS, "rtc-rs5c348"); - gpio_direction_output(16 + SRTC_CS, 0); - gpio_request(SEEPROM1_CS, "seeprom1"); - gpio_direction_output(SEEPROM1_CS, 1); - gpio_request(16 + SEEPROM2_CS, "seeprom2"); - gpio_direction_output(16 + SEEPROM2_CS, 1); - gpio_request(16 + SEEPROM3_CS, "seeprom3"); - gpio_direction_output(16 + SEEPROM3_CS, 1); - txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI); - return 0; -} - -static int __init rbtx4938_arch_init(void) -{ - txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16); - gpiochip_add(&rbtx4938_spi_gpio_chip); - return rbtx4938_spi_init(); -} -arch_initcall(rbtx4938_arch_init); - -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init rbtx4938_wdt_init(void) -{ - return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); -} -device_initcall(rbtx4938_wdt_init); - -/* Minimum CLK support */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "spi-baseclk")) - return (struct clk *)(txx9_gbus_clock / 2 / 4); - if (!strcmp(id, "imbus_clk")) - return (struct clk *)(txx9_gbus_clock / 2); - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return (unsigned long)clk; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c deleted file mode 100644 index 4d6b4ade5e8c..000000000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include -#include - -#define AT250X0_PAGE_SIZE 8 - -/* register board information for at25 driver */ -int __init spi_eeprom_register(int chipid) -{ - static struct spi_eeprom eeprom = { - .name = "at250x0", - .byte_len = 128, - .page_size = AT250X0_PAGE_SIZE, - .flags = EE_ADDR1, - }; - struct spi_board_info info = { - .modalias = "at25", - .max_speed_hz = 1500000, /* 1.5Mbps */ - .bus_num = 0, - .chip_select = chipid, - .platform_data = &eeprom, - /* Mode 0: High-Active, Sample-Then-Shift */ - }; - - return spi_register_board_info(&info, 1); -} - -/* simple temporary spi driver to provide early access to seeprom. */ - -static struct read_param { - int chipid; - int address; - unsigned char *buf; - int len; -} *read_param; - -static int __init early_seeprom_probe(struct spi_device *spi) -{ - int stat = 0; - u8 cmd[2]; - int len = read_param->len; - char *buf = read_param->buf; - int address = read_param->address; - - dev_info(&spi->dev, "spiclk %u KHz.\n", - (spi->max_speed_hz + 500) / 1000); - if (read_param->chipid != spi->chip_select) - return -ENODEV; - while (len > 0) { - /* spi_write_then_read can only work with small chunk */ - int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE; - cmd[0] = 0x03; /* AT25_READ */ - cmd[1] = address; - stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c); - buf += c; - len -= c; - address += c; - } - return stat; -} - -static struct spi_driver early_seeprom_driver __initdata = { - .driver = { - .name = "at25", - .owner = THIS_MODULE, - }, - .probe = early_seeprom_probe, -}; - -int __init spi_eeprom_read(int chipid, int address, - unsigned char *buf, int len) -{ - int ret; - struct read_param param = { - .chipid = chipid, - .address = address, - .buf = buf, - .len = len - }; - - read_param = ¶m; - ret = spi_register_driver(&early_seeprom_driver); - if (!ret) - spi_unregister_driver(&early_seeprom_driver); - return ret; -} diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig new file mode 100644 index 000000000000..98d103402b10 --- /dev/null +++ b/arch/mips/txx9/Kconfig @@ -0,0 +1,28 @@ +config TOSHIBA_FPCIB0 + bool "FPCIB0 Backplane Support" + depends on TOSHIBA_RBTX4927 + +if TOSHIBA_RBTX4938 + +comment "Multiplex Pin Select" +choice + prompt "PIO[58:61]" + default TOSHIBA_RBTX4938_MPLEX_PIO58_61 + +config TOSHIBA_RBTX4938_MPLEX_PIO58_61 + bool "PIO" +config TOSHIBA_RBTX4938_MPLEX_NAND + bool "NAND" +config TOSHIBA_RBTX4938_MPLEX_ATA + bool "ATA" + +endchoice + +config TX4938_NAND_BOOT + depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND + bool "NAND Boot Support (EXPERIMENTAL)" + help + This is only for Toshiba RBTX4938 reference board, which has NAND IPL. + Select this option if you need to use NAND boot. + +endif diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile new file mode 100644 index 000000000000..8cb4a7e81473 --- /dev/null +++ b/arch/mips/txx9/generic/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for common code for TXx9 based systems +# + +obj-$(CONFIG_TOSHIBA_RBTX4927) += mem_tx4927.o irq_tx4927.o +obj-$(CONFIG_TOSHIBA_RBTX4938) += mem_tx4938.o irq_tx4938.o +obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o +obj-$(CONFIG_KGDB) += dbgio.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/generic/dbgio.c b/arch/mips/txx9/generic/dbgio.c new file mode 100644 index 000000000000..33b9c672a322 --- /dev/null +++ b/arch/mips/txx9/generic/dbgio.c @@ -0,0 +1,48 @@ +/* + * linux/arch/mips/tx4938/common/dbgio.c + * + * kgdb interface for gdb + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2005 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Support for TX4938 in 2.6 - Hiroshi DOYU + */ + +#include + +extern u8 txx9_sio_kdbg_rd(void); +extern int txx9_sio_kdbg_wr( u8 ch ); + +u8 getDebugChar(void) +{ + return (txx9_sio_kdbg_rd()); +} + +int putDebugChar(u8 byte) +{ + return (txx9_sio_kdbg_wr(byte)); +} + diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c new file mode 100644 index 000000000000..685ecc2ed551 --- /dev/null +++ b/arch/mips/txx9/generic/irq_tx4927.c @@ -0,0 +1,64 @@ +/* + * Common tx4927 irq handler + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#ifdef CONFIG_TOSHIBA_RBTX4927 +#include +#endif + +void __init tx4927_irq_init(void) +{ + mips_cpu_irq_init(); + txx9_irq_init(TX4927_IRC_REG); + set_irq_chained_handler(TX4927_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + + if (pending & STATUSF_IP7) /* cpu timer */ + do_IRQ(TX4927_IRQ_CPU_TIMER); + else if (pending & STATUSF_IP2) { /* tx4927 pic */ + int irq = txx9_irq(); +#ifdef CONFIG_TOSHIBA_RBTX4927 + if (irq == TX4927_IRQ_NEST_EXT_ON_PIC) + irq = toshiba_rbtx4927_irq_nested(irq); +#endif + if (unlikely(irq < 0)) { + spurious_interrupt(); + return; + } + do_IRQ(irq); + } else if (pending & STATUSF_IP0) /* user line 0 */ + do_IRQ(TX4927_IRQ_USER0); + else if (pending & STATUSF_IP1) /* user line 1 */ + do_IRQ(TX4927_IRQ_USER1); + else + spurious_interrupt(); +} diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c new file mode 100644 index 000000000000..0886d9138818 --- /dev/null +++ b/arch/mips/txx9/generic/irq_tx4938.c @@ -0,0 +1,48 @@ +/* + * linux/arch/mips/tx4938/common/irq.c + * + * Common tx4938 irq handler + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#include +#include +#include +#include +#include + +void __init +tx4938_irq_init(void) +{ + mips_cpu_irq_init(); + txx9_irq_init(TX4938_IRC_REG); + set_irq_chained_handler(TX4938_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); +} + +int toshiba_rbtx4938_irq_nested(int irq); + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_cause() & read_c0_status(); + + if (pending & STATUSF_IP7) + do_IRQ(TX4938_IRQ_CPU_TIMER); + else if (pending & STATUSF_IP2) { + int irq = txx9_irq(); + if (irq == TX4938_IRQ_PIC_BEG + TX4938_IR_INT(0)) + irq = toshiba_rbtx4938_irq_nested(irq); + if (irq >= 0) + do_IRQ(irq); + else + spurious_interrupt(); + } else if (pending & STATUSF_IP1) + do_IRQ(TX4938_IRQ_USER1); + else if (pending & STATUSF_IP0) + do_IRQ(TX4938_IRQ_USER0); +} diff --git a/arch/mips/txx9/generic/mem_tx4927.c b/arch/mips/txx9/generic/mem_tx4927.c new file mode 100644 index 000000000000..12dfc377bf2f --- /dev/null +++ b/arch/mips/txx9/generic/mem_tx4927.c @@ -0,0 +1,141 @@ +/* + * linux/arch/mips/tx4927/common/tx4927_prom.c + * + * common tx4927 memory interface + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include + +static unsigned int __init tx4927_process_sdccr(unsigned long addr) +{ + u64 val; + unsigned int sdccr_ce; + unsigned int sdccr_bs; + unsigned int sdccr_rs; + unsigned int sdccr_cs; + unsigned int sdccr_mw; + unsigned int bs = 0; + unsigned int rs = 0; + unsigned int cs = 0; + unsigned int mw = 0; + unsigned int msize = 0; + + val = __raw_readq((void __iomem *)addr); + + /* MVMCP -- need #defs for these bits masks */ + sdccr_ce = ((val & (1 << 10)) >> 10); + sdccr_bs = ((val & (1 << 8)) >> 8); + sdccr_rs = ((val & (3 << 5)) >> 5); + sdccr_cs = ((val & (3 << 2)) >> 2); + sdccr_mw = ((val & (1 << 0)) >> 0); + + if (sdccr_ce) { + switch (sdccr_bs) { + case 0:{ + bs = 2; + break; + } + case 1:{ + bs = 4; + break; + } + } + switch (sdccr_rs) { + case 0:{ + rs = 2048; + break; + } + case 1:{ + rs = 4096; + break; + } + case 2:{ + rs = 8192; + break; + } + case 3:{ + rs = 0; + break; + } + } + switch (sdccr_cs) { + case 0:{ + cs = 256; + break; + } + case 1:{ + cs = 512; + break; + } + case 2:{ + cs = 1024; + break; + } + case 3:{ + cs = 2048; + break; + } + } + switch (sdccr_mw) { + case 0:{ + mw = 8; + break; + } /* 8 bytes = 64 bits */ + case 1:{ + mw = 4; + break; + } /* 4 bytes = 32 bits */ + } + } + + /* bytes per chip MB per chip num chips */ + msize = (((rs * cs * mw) / (1024 * 1024)) * bs); + + return (msize); +} + + +unsigned int __init tx4927_get_mem_size(void) +{ + unsigned int c0; + unsigned int c1; + unsigned int c2; + unsigned int c3; + unsigned int total; + + /* MVMCP -- need #defs for these registers */ + c0 = tx4927_process_sdccr(0xff1f8000); + c1 = tx4927_process_sdccr(0xff1f8008); + c2 = tx4927_process_sdccr(0xff1f8010); + c3 = tx4927_process_sdccr(0xff1f8018); + total = c0 + c1 + c2 + c3; + + return (total); +} diff --git a/arch/mips/txx9/generic/mem_tx4938.c b/arch/mips/txx9/generic/mem_tx4938.c new file mode 100644 index 000000000000..20baeaeba4cd --- /dev/null +++ b/arch/mips/txx9/generic/mem_tx4938.c @@ -0,0 +1,124 @@ +/* + * linux/arch/mips/tx4938/common/prom.c + * + * common tx4938 memory interface + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ + +#include +#include +#include + +static unsigned int __init +tx4938_process_sdccr(u64 * addr) +{ + u64 val; + unsigned int sdccr_ce; + unsigned int sdccr_rs; + unsigned int sdccr_cs; + unsigned int sdccr_mw; + unsigned int rs = 0; + unsigned int cs = 0; + unsigned int mw = 0; + unsigned int bc = 4; + unsigned int msize = 0; + + val = ____raw_readq((void __iomem *)addr); + + /* MVMCP -- need #defs for these bits masks */ + sdccr_ce = ((val & (1 << 10)) >> 10); + sdccr_rs = ((val & (3 << 5)) >> 5); + sdccr_cs = ((val & (7 << 2)) >> 2); + sdccr_mw = ((val & (1 << 0)) >> 0); + + if (sdccr_ce) { + switch (sdccr_rs) { + case 0:{ + rs = 2048; + break; + } + case 1:{ + rs = 4096; + break; + } + case 2:{ + rs = 8192; + break; + } + default:{ + rs = 0; + break; + } + } + switch (sdccr_cs) { + case 0:{ + cs = 256; + break; + } + case 1:{ + cs = 512; + break; + } + case 2:{ + cs = 1024; + break; + } + case 3:{ + cs = 2048; + break; + } + case 4:{ + cs = 4096; + break; + } + default:{ + cs = 0; + break; + } + } + switch (sdccr_mw) { + case 0:{ + mw = 8; + break; + } /* 8 bytes = 64 bits */ + case 1:{ + mw = 4; + break; + } /* 4 bytes = 32 bits */ + } + } + + /* bytes per chip MB per chip bank count */ + msize = (((rs * cs * mw) / (1024 * 1024)) * (bc)); + + /* MVMCP -- bc hard coded to 4 from table 9.3.1 */ + /* boad supports bc=2 but no way to detect */ + + return (msize); +} + +unsigned int __init +tx4938_get_mem_size(void) +{ + unsigned int c0; + unsigned int c1; + unsigned int c2; + unsigned int c3; + unsigned int total; + + /* MVMCP -- need #defs for these registers */ + c0 = tx4938_process_sdccr((u64 *) 0xff1f8000); + c1 = tx4938_process_sdccr((u64 *) 0xff1f8008); + c2 = tx4938_process_sdccr((u64 *) 0xff1f8010); + c3 = tx4938_process_sdccr((u64 *) 0xff1f8018); + total = c0 + c1 + c2 + c3; + + return (total); +} diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c new file mode 100644 index 000000000000..69e487467fa5 --- /dev/null +++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c @@ -0,0 +1,172 @@ +/* + * Interface for smsc fdc48m81x Super IO chip + * + * Author: MontaVista Software, Inc. source@mvista.com + * + * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright 2004 (c) MontaVista Software, Inc. + */ +#include +#include +#include +#include + +#define DEBUG + +/* Common Registers */ +#define SMSC_FDC37M81X_CONFIG_INDEX 0x00 +#define SMSC_FDC37M81X_CONFIG_DATA 0x01 +#define SMSC_FDC37M81X_CONF 0x02 +#define SMSC_FDC37M81X_INDEX 0x03 +#define SMSC_FDC37M81X_DNUM 0x07 +#define SMSC_FDC37M81X_DID 0x20 +#define SMSC_FDC37M81X_DREV 0x21 +#define SMSC_FDC37M81X_PCNT 0x22 +#define SMSC_FDC37M81X_PMGT 0x23 +#define SMSC_FDC37M81X_OSC 0x24 +#define SMSC_FDC37M81X_CONFPA0 0x26 +#define SMSC_FDC37M81X_CONFPA1 0x27 +#define SMSC_FDC37M81X_TEST4 0x2B +#define SMSC_FDC37M81X_TEST5 0x2C +#define SMSC_FDC37M81X_TEST1 0x2D +#define SMSC_FDC37M81X_TEST2 0x2E +#define SMSC_FDC37M81X_TEST3 0x2F + +/* Logical device numbers */ +#define SMSC_FDC37M81X_FDD 0x00 +#define SMSC_FDC37M81X_SERIAL1 0x04 +#define SMSC_FDC37M81X_SERIAL2 0x05 +#define SMSC_FDC37M81X_KBD 0x07 + +/* Logical device Config Registers */ +#define SMSC_FDC37M81X_ACTIVE 0x30 +#define SMSC_FDC37M81X_BASEADDR0 0x60 +#define SMSC_FDC37M81X_BASEADDR1 0x61 +#define SMSC_FDC37M81X_INT 0x70 +#define SMSC_FDC37M81X_INT2 0x72 +#define SMSC_FDC37M81X_MODE 0xF0 + +/* Chip Config Values */ +#define SMSC_FDC37M81X_CONFIG_ENTER 0x55 +#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa +#define SMSC_FDC37M81X_CHIP_ID 0x4d + +static unsigned long g_smsc_fdc37m81x_base = 0; + +static inline unsigned char smsc_fdc37m81x_rd(unsigned char index) +{ + outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); + + return inb(g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA); +} + +static inline void smsc_dc37m81x_wr(unsigned char index, unsigned char data) +{ + outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); + outb(data, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA); +} + +void smsc_fdc37m81x_config_beg(void) +{ + if (g_smsc_fdc37m81x_base) { + outb(SMSC_FDC37M81X_CONFIG_ENTER, + g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); + } +} + +void smsc_fdc37m81x_config_end(void) +{ + if (g_smsc_fdc37m81x_base) + outb(SMSC_FDC37M81X_CONFIG_EXIT, + g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); +} + +u8 smsc_fdc37m81x_config_get(u8 reg) +{ + u8 val = 0; + + if (g_smsc_fdc37m81x_base) + val = smsc_fdc37m81x_rd(reg); + + return val; +} + +void smsc_fdc37m81x_config_set(u8 reg, u8 val) +{ + if (g_smsc_fdc37m81x_base) + smsc_dc37m81x_wr(reg, val); +} + +unsigned long __init smsc_fdc37m81x_init(unsigned long port) +{ + const int field = sizeof(unsigned long) * 2; + u8 chip_id; + + if (g_smsc_fdc37m81x_base) + printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n", + field, g_smsc_fdc37m81x_base); + + g_smsc_fdc37m81x_base = port; + + smsc_fdc37m81x_config_beg(); + + chip_id = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DID); + if (chip_id == SMSC_FDC37M81X_CHIP_ID) + smsc_fdc37m81x_config_end(); + else { + printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n", + chip_id); + g_smsc_fdc37m81x_base = 0; + } + + return g_smsc_fdc37m81x_base; +} + +#ifdef DEBUG +void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg) +{ + printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg, + smsc_fdc37m81x_rd(reg)); +} + +void smsc_fdc37m81x_config_dump(void) +{ + u8 orig; + char *fname = "smsc_fdc37m81x_config_dump()"; + + smsc_fdc37m81x_config_beg(); + + orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM); + + printk("%s: common\n", fname); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_DNUM); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_DID); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_DREV); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_PCNT); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_PMGT); + + printk("%s: keyboard\n", fname); + smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, + SMSC_FDC37M81X_ACTIVE); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, + SMSC_FDC37M81X_INT); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, + SMSC_FDC37M81X_INT2); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, + SMSC_FDC37M81X_LDCR_F0); + + smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, orig); + + smsc_fdc37m81x_config_end(); +} +#endif diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile new file mode 100644 index 000000000000..5f83ea375225 --- /dev/null +++ b/arch/mips/txx9/jmr3927/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for TOSHIBA JMR-TX3927 board +# + +obj-y += prom.o init.o irq.o setup.o +obj-$(CONFIG_KGDB) += kgdb_io.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/jmr3927/init.c b/arch/mips/txx9/jmr3927/init.c new file mode 100644 index 000000000000..1bbb5343baf4 --- /dev/null +++ b/arch/mips/txx9/jmr3927/init.c @@ -0,0 +1,57 @@ +/* + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com + * + * arch/mips/jmr3927/common/init.c + * + * Copyright (C) 2000-2001 Toshiba Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include + +extern void __init prom_init_cmdline(void); + +const char *get_system_type(void) +{ + return "Toshiba" +#ifdef CONFIG_TOSHIBA_JMR3927 + " JMR_TX3927" +#endif + ; +} + +extern void puts(const char *cp); + +void __init prom_init(void) +{ +#ifdef CONFIG_TOSHIBA_JMR3927 + /* CCFG */ + if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) + puts("Warning: TX3927 TLB off\n"); +#endif + + prom_init_cmdline(); + add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); +} diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c new file mode 100644 index 000000000000..85e1daf15c7b --- /dev/null +++ b/arch/mips/txx9/jmr3927/irq.c @@ -0,0 +1,174 @@ +/* + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2001 Toshiba Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#if JMR3927_IRQ_END > NR_IRQS +#error JMR3927_IRQ_END > NR_IRQS +#endif + +static unsigned char irc_level[TX3927_NUM_IR] = { + 5, 5, 5, 5, 5, 5, /* INT[5:0] */ + 7, 7, /* SIO */ + 5, 5, 5, 0, 0, /* DMA, PIO, PCI */ + 6, 6, 6 /* TMR */ +}; + +/* + * CP0_STATUS is a thread's resource (saved/restored on context switch). + * So disable_irq/enable_irq MUST handle IOC/IRC registers. + */ +static void mask_irq_ioc(unsigned int irq) +{ + /* 0: mask */ + unsigned int irq_nr = irq - JMR3927_IRQ_IOC; + unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR); + unsigned int bit = 1 << irq_nr; + jmr3927_ioc_reg_out(imask & ~bit, JMR3927_IOC_INTM_ADDR); + /* flush write buffer */ + (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); +} +static void unmask_irq_ioc(unsigned int irq) +{ + /* 0: mask */ + unsigned int irq_nr = irq - JMR3927_IRQ_IOC; + unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR); + unsigned int bit = 1 << irq_nr; + jmr3927_ioc_reg_out(imask | bit, JMR3927_IOC_INTM_ADDR); + /* flush write buffer */ + (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long cp0_cause = read_c0_cause(); + int irq; + + if ((cp0_cause & CAUSEF_IP7) == 0) + return; + irq = (cp0_cause >> CAUSEB_IP2) & 0x0f; + + do_IRQ(irq + JMR3927_IRQ_IRC); +} + +static irqreturn_t jmr3927_ioc_interrupt(int irq, void *dev_id) +{ + unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR); + int i; + + for (i = 0; i < JMR3927_NR_IRQ_IOC; i++) { + if (istat & (1 << i)) { + irq = JMR3927_IRQ_IOC + i; + do_IRQ(irq); + } + } + return IRQ_HANDLED; +} + +static struct irqaction ioc_action = { + .handler = jmr3927_ioc_interrupt, + .mask = CPU_MASK_NONE, + .name = "IOC", +}; + +static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id) +{ + printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq); + printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n", + tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat); + + return IRQ_HANDLED; +} +static struct irqaction pcierr_action = { + .handler = jmr3927_pcierr_interrupt, + .mask = CPU_MASK_NONE, + .name = "PCI error", +}; + +static void __init jmr3927_irq_init(void); + +void __init arch_init_irq(void) +{ + /* Now, interrupt control disabled, */ + /* all IRC interrupts are masked, */ + /* all IRC interrupt mode are Low Active. */ + + /* mask all IOC interrupts */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_INTM_ADDR); + /* setup IOC interrupt mode (SOFT:High Active, Others:Low Active) */ + jmr3927_ioc_reg_out(JMR3927_IOC_INTF_SOFT, JMR3927_IOC_INTP_ADDR); + + /* clear PCI Soft interrupts */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_INTS1_ADDR); + /* clear PCI Reset interrupts */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + + jmr3927_irq_init(); + + /* setup IOC interrupt 1 (PCI, MODEM) */ + setup_irq(JMR3927_IRQ_IOCINT, &ioc_action); + +#ifdef CONFIG_PCI + setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action); +#endif + + /* enable all CPU interrupt bits. */ + set_c0_status(ST0_IM); /* IE bit is still 0. */ +} + +static struct irq_chip jmr3927_irq_ioc = { + .name = "jmr3927_ioc", + .ack = mask_irq_ioc, + .mask = mask_irq_ioc, + .mask_ack = mask_irq_ioc, + .unmask = unmask_irq_ioc, +}; + +static void __init jmr3927_irq_init(void) +{ + u32 i; + + txx9_irq_init(TX3927_IRC_REG); + for (i = 0; i < TXx9_MAX_IR; i++) + txx9_irq_set_pri(i, irc_level[i]); + for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++) + set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq); +} diff --git a/arch/mips/txx9/jmr3927/kgdb_io.c b/arch/mips/txx9/jmr3927/kgdb_io.c new file mode 100644 index 000000000000..5bd757e56f79 --- /dev/null +++ b/arch/mips/txx9/jmr3927/kgdb_io.c @@ -0,0 +1,105 @@ +/* + * BRIEF MODULE DESCRIPTION + * Low level uart routines to directly access a TX[34]927 SIO. + * + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com or source@mvista.com + * + * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c + * + * Copyright (C) 2000-2001 Toshiba Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +#define TIMEOUT 0xffffff + +static int remoteDebugInitialized = 0; +static void debugInit(int baud); + +int putDebugChar(unsigned char c) +{ + int i = 0; + + if (!remoteDebugInitialized) { + remoteDebugInitialized = 1; + debugInit(38400); + } + + do { + slow_down(); + i++; + if (i>TIMEOUT) { + break; + } + } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS)); + tx3927_sioptr(0)->tfifo = c; + + return 1; +} + +unsigned char getDebugChar(void) +{ + int i = 0; + int dicr; + char c; + + if (!remoteDebugInitialized) { + remoteDebugInitialized = 1; + debugInit(38400); + } + + /* diable RX int. */ + dicr = tx3927_sioptr(0)->dicr; + tx3927_sioptr(0)->dicr = 0; + + do { + slow_down(); + i++; + if (i>TIMEOUT) { + break; + } + } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID) + ; + c = tx3927_sioptr(0)->rfifo; + + /* clear RX int. status */ + tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS; + /* enable RX int. */ + tx3927_sioptr(0)->dicr = dicr; + + return c; +} + +static void debugInit(int baud) +{ + tx3927_sioptr(0)->lcr = 0x020; + tx3927_sioptr(0)->dicr = 0; + tx3927_sioptr(0)->disr = 0x4100; + tx3927_sioptr(0)->cisr = 0x014; + tx3927_sioptr(0)->fcr = 0; + tx3927_sioptr(0)->flcr = 0x02; + tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) | + TXx927_SIBGR_BCLK_T0; +} diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c new file mode 100644 index 000000000000..8bc1049b622e --- /dev/null +++ b/arch/mips/txx9/jmr3927/prom.c @@ -0,0 +1,98 @@ +/* + * BRIEF MODULE DESCRIPTION + * PROM library initialisation code, assuming a version of + * pmon is the boot code. + * + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com + * + * Based on arch/mips/au1000/common/prom.c + * + * This file was derived from Carsten Langgaard's + * arch/mips/mips-boards/xx files. + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include + +#include +#include + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +void __init prom_init_cmdline(void) +{ + char *cp; + int actr; + int prom_argc = fw_arg0; + char **prom_argv = (char **) fw_arg1; + + actr = 1; /* Always ignore argv[0] */ + + cp = &(arcs_cmdline[0]); + while(actr < prom_argc) { + strcpy(cp, prom_argv[actr]); + cp += strlen(prom_argv[actr]); + *cp++ = ' '; + actr++; + } + if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ + --cp; + *cp = '\0'; +} + +void __init prom_free_prom_memory(void) +{ +} + +#define TIMEOUT 0xffffff + +void +prom_putchar(char c) +{ + int i = 0; + + do { + i++; + if (i>TIMEOUT) + break; + } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS)); + tx3927_sioptr(1)->tfifo = c; + return; +} + +void +puts(const char *cp) +{ + while (*cp) + prom_putchar(*cp++); + prom_putchar('\r'); + prom_putchar('\n'); +} diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c new file mode 100644 index 000000000000..41e0f3b3af2c --- /dev/null +++ b/arch/mips/txx9/jmr3927/setup.c @@ -0,0 +1,445 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ahennessy@mvista.com + * + * Copyright (C) 2000-2001 Toshiba Corporation + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SERIAL_TXX9 +#include +#endif + +#include +#include +#include +#include +#include + +extern void puts(const char *cp); + +/* don't enable - see errata */ +static int jmr3927_ccfg_toeon; + +static inline void do_reset(void) +{ +#if 1 /* Resetting PCI bus */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR); + (void)jmr3927_ioc_reg_in(JMR3927_IOC_RESET_ADDR); /* flush WB */ + mdelay(1); + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); +#endif + jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR); +} + +static void jmr3927_machine_restart(char *command) +{ + local_irq_disable(); + puts("Rebooting..."); + do_reset(); +} + +static void jmr3927_machine_halt(void) +{ + puts("JMR-TX3927 halted.\n"); + while (1); +} + +static void jmr3927_machine_power_off(void) +{ + puts("JMR-TX3927 halted. Please turn off the power.\n"); + while (1); +} + +void __init plat_time_init(void) +{ + txx9_clockevent_init(TX3927_TMR_REG(0), + TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0), + JMR3927_IMCLK); + txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK); +} + +#define DO_WRITE_THROUGH +#define DO_ENABLE_CACHE + +extern char * __init prom_getcmdline(void); +static void jmr3927_board_init(void); +extern struct resource pci_io_resource; +extern struct resource pci_mem_resource; + +void __init plat_mem_setup(void) +{ + char *argptr; + + set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO); + + _machine_restart = jmr3927_machine_restart; + _machine_halt = jmr3927_machine_halt; + pm_power_off = jmr3927_machine_power_off; + + /* + * IO/MEM resources. + */ + ioport_resource.start = pci_io_resource.start; + ioport_resource.end = pci_io_resource.end; + iomem_resource.start = 0; + iomem_resource.end = 0xffffffff; + + /* Reboot on panic */ + panic_timeout = 180; + + /* cache setup */ + { + unsigned int conf; +#ifdef DO_ENABLE_CACHE + int mips_ic_disable = 0, mips_dc_disable = 0; +#else + int mips_ic_disable = 1, mips_dc_disable = 1; +#endif +#ifdef DO_WRITE_THROUGH + int mips_config_cwfon = 0; + int mips_config_wbon = 0; +#else + int mips_config_cwfon = 1; + int mips_config_wbon = 1; +#endif + + conf = read_c0_conf(); + conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON); + conf |= mips_ic_disable ? 0 : TX39_CONF_ICE; + conf |= mips_dc_disable ? 0 : TX39_CONF_DCE; + conf |= mips_config_wbon ? TX39_CONF_WBON : 0; + conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0; + + write_c0_conf(conf); + write_c0_cache(0); + } + + /* initialize board */ + jmr3927_board_init(); + + argptr = prom_getcmdline(); + + if ((argptr = strstr(argptr, "toeon")) != NULL) + jmr3927_ccfg_toeon = 1; + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "ip=")) == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " ip=bootp"); + } + +#ifdef CONFIG_SERIAL_TXX9 + { + extern int early_serial_txx9_setup(struct uart_port *port); + int i; + struct uart_port req; + for(i = 0; i < 2; i++) { + memset(&req, 0, sizeof(req)); + req.line = i; + req.iotype = UPIO_MEM; + req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i); + req.mapbase = TX3927_SIO_REG(i); + req.irq = i == 0 ? + JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1; + if (i == 0) + req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; + req.uartclk = JMR3927_IMCLK; + early_serial_txx9_setup(&req); + } + } +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + argptr = prom_getcmdline(); + if ((argptr = strstr(argptr, "console=")) == NULL) { + argptr = prom_getcmdline(); + strcat(argptr, " console=ttyS1,115200"); + } +#endif +#endif +} + +static void tx3927_setup(void); + +static void __init jmr3927_board_init(void) +{ + tx3927_setup(); + + /* SIO0 DTR on */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); + + jmr3927_led_set(0); + + printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", + jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, + jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, + jmr3927_dipsw1(), jmr3927_dipsw2(), + jmr3927_dipsw3(), jmr3927_dipsw4()); +} + +static void __init tx3927_setup(void) +{ + int i; +#ifdef CONFIG_PCI + unsigned long mips_pci_io_base = JMR3927_PCIIO; + unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE; + unsigned long mips_pci_mem_base = JMR3927_PCIMEM; + unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE; + /* for legacy I/O, PCI I/O PCI Bus address must be 0 */ + unsigned long mips_pci_io_pciaddr = 0; +#endif + + /* SDRAMC are configured by PROM */ + + /* ROMC */ + tx3927_romcptr->cr[1] = JMR3927_ROMCE1 | 0x00030048; + tx3927_romcptr->cr[2] = JMR3927_ROMCE2 | 0x000064c8; + tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698; + tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218; + + /* CCFG */ + /* enable Timeout BusError */ + if (jmr3927_ccfg_toeon) + tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE; + + /* clear BusErrorOnWrite flag */ + tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW; + /* Disable PCI snoop */ + tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP; + /* do reset on watchdog */ + tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR; + +#ifdef DO_WRITE_THROUGH + /* Enable PCI SNOOP - with write through only */ + tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP; +#endif + + /* Pin selection */ + tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL; + tx3927_ccfgptr->pcfg |= + TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL | + (TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1)); + + printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n", + tx3927_ccfgptr->crir, + tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg); + + /* TMR */ + for (i = 0; i < TX3927_NR_TMR; i++) + txx9_tmr_init(TX3927_TMR_REG(i)); + + /* DMA */ + tx3927_dmaptr->mcr = 0; + for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) { + /* reset channel */ + tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST; + tx3927_dmaptr->ch[i].ccr = 0; + } + /* enable DMA */ +#ifdef __BIG_ENDIAN + tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN; +#else + tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; +#endif + +#ifdef CONFIG_PCI + /* PCIC */ + printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:", + tx3927_pcicptr->did, tx3927_pcicptr->vid, + tx3927_pcicptr->rid); + if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) { + printk("External\n"); + /* XXX */ + } else { + printk("Internal\n"); + + /* Reset PCI Bus */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + udelay(100); + jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, + JMR3927_IOC_RESET_ADDR); + udelay(100); + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + + + /* Disable External PCI Config. Access */ + tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD; +#ifdef __BIG_ENDIAN + tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE | + TX3927_PCIC_LBC_TIBSE | + TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE; +#endif + /* LB->PCI mappings */ + tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1); + tx3927_pcicptr->ilbioma = mips_pci_io_base; + tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr; + tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1); + tx3927_pcicptr->ilbmma = mips_pci_mem_base; + tx3927_pcicptr->ipbmma = mips_pci_mem_base; + /* PCI->LB mappings */ + tx3927_pcicptr->iobas = 0xffffffff; + tx3927_pcicptr->ioba = 0; + tx3927_pcicptr->tlbioma = 0; + tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1); + tx3927_pcicptr->mba = 0; + tx3927_pcicptr->tlbmma = 0; + /* Enable Direct mapping Address Space Decoder */ + tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE; + + /* Clear All Local Bus Status */ + tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL; + /* Enable All Local Bus Interrupts */ + tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL; + /* Clear All PCI Status Error */ + tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL; + /* Enable All PCI Status Error Interrupts */ + tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL; + + /* PCIC Int => IRC IRQ10 */ + tx3927_pcicptr->il = TX3927_IR_PCI; + /* Target Control (per errata) */ + tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E; + + /* Enable Bus Arbiter */ + tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN; + + tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | + PCI_COMMAND_IO | + PCI_COMMAND_PARITY | PCI_COMMAND_SERR; + } +#endif /* CONFIG_PCI */ + + /* PIO */ + /* PIO[15:12] connected to LEDs */ + __raw_writel(0x0000f000, &tx3927_pioptr->dir); + __raw_writel(0, &tx3927_pioptr->maskcpu); + __raw_writel(0, &tx3927_pioptr->maskext); + txx9_gpio_init(TX3927_PIO_REG, 0, 16); + gpio_request(11, "dipsw1"); + gpio_request(10, "dipsw2"); + { + unsigned int conf; + + conf = read_c0_conf(); + if (!(conf & TX39_CONF_ICE)) + printk("TX3927 I-Cache disabled.\n"); + if (!(conf & TX39_CONF_DCE)) + printk("TX3927 D-Cache disabled.\n"); + else if (!(conf & TX39_CONF_WBON)) + printk("TX3927 D-Cache WriteThrough.\n"); + else if (!(conf & TX39_CONF_CWFON)) + printk("TX3927 D-Cache WriteBack.\n"); + else + printk("TX3927 D-Cache WriteBack (CWF) .\n"); + } +} + +/* This trick makes rtc-ds1742 driver usable as is. */ +unsigned long __swizzle_addr_b(unsigned long port) +{ + if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR) + return port; + port = (port & 0xffff0000) | (port & 0x7fff << 1); +#ifdef __BIG_ENDIAN + return port; +#else + return port | 1; +#endif +} +EXPORT_SYMBOL(__swizzle_addr_b); + +static int __init jmr3927_rtc_init(void) +{ + static struct resource __initdata res = { + .start = JMR3927_IOC_NVRAMB_ADDR - IO_BASE, + .end = JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev; + dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} +device_initcall(jmr3927_rtc_init); + +/* Watchdog support */ + +static int __init txx9_wdt_init(unsigned long base) +{ + struct resource res = { + .start = base, + .end = base + 0x100 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev = + platform_device_register_simple("txx9wdt", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} + +static int __init jmr3927_wdt_init(void) +{ + return txx9_wdt_init(TX3927_TMR_REG(2)); +} +device_initcall(jmr3927_wdt_init); + +/* Minimum CLK support */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "imbus_clk")) + return (struct clk *)JMR3927_IMCLK; + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/txx9/rbtx4927/Makefile b/arch/mips/txx9/rbtx4927/Makefile new file mode 100644 index 000000000000..f3e1f597b4f1 --- /dev/null +++ b/arch/mips/txx9/rbtx4927/Makefile @@ -0,0 +1,3 @@ +obj-y += prom.o setup.o irq.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c new file mode 100644 index 000000000000..936e50e91d95 --- /dev/null +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -0,0 +1,214 @@ +/* + * Toshiba RBTX4927 specific interrupt handlers + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +/* +IRQ Device +00 RBTX4927-ISA/00 +01 RBTX4927-ISA/01 PS2/Keyboard +02 RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15) +03 RBTX4927-ISA/03 +04 RBTX4927-ISA/04 +05 RBTX4927-ISA/05 +06 RBTX4927-ISA/06 +07 RBTX4927-ISA/07 +08 RBTX4927-ISA/08 +09 RBTX4927-ISA/09 +10 RBTX4927-ISA/10 +11 RBTX4927-ISA/11 +12 RBTX4927-ISA/12 PS2/Mouse (not supported at this time) +13 RBTX4927-ISA/13 +14 RBTX4927-ISA/14 IDE +15 RBTX4927-ISA/15 + +16 TX4927-CP0/00 Software 0 +17 TX4927-CP0/01 Software 1 +18 TX4927-CP0/02 Cascade TX4927-CP0 +19 TX4927-CP0/03 Multiplexed -- do not use +20 TX4927-CP0/04 Multiplexed -- do not use +21 TX4927-CP0/05 Multiplexed -- do not use +22 TX4927-CP0/06 Multiplexed -- do not use +23 TX4927-CP0/07 CPU TIMER + +24 TX4927-PIC/00 +25 TX4927-PIC/01 +26 TX4927-PIC/02 +27 TX4927-PIC/03 Cascade RBTX4927-IOC +28 TX4927-PIC/04 +29 TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet +30 TX4927-PIC/06 +31 TX4927-PIC/07 +32 TX4927-PIC/08 TX4927 SerialIO Channel 0 +33 TX4927-PIC/09 TX4927 SerialIO Channel 1 +34 TX4927-PIC/10 +35 TX4927-PIC/11 +36 TX4927-PIC/12 +37 TX4927-PIC/13 +38 TX4927-PIC/14 +39 TX4927-PIC/15 +40 TX4927-PIC/16 TX4927 PCI PCI-C +41 TX4927-PIC/17 +42 TX4927-PIC/18 +43 TX4927-PIC/19 +44 TX4927-PIC/20 +45 TX4927-PIC/21 +46 TX4927-PIC/22 TX4927 PCI PCI-ERR +47 TX4927-PIC/23 TX4927 PCI PCI-PMA (not used) +48 TX4927-PIC/24 +49 TX4927-PIC/25 +50 TX4927-PIC/26 +51 TX4927-PIC/27 +52 TX4927-PIC/28 +53 TX4927-PIC/29 +54 TX4927-PIC/30 +55 TX4927-PIC/31 + +56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed) [RTL-8139=PJ4] +57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed) [RTL-8139=PJ5] +58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported] +59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4) [RTL-8139=PJ6] +60 RBTX4927-IOC/04 +61 RBTX4927-IOC/05 +62 RBTX4927-IOC/06 +63 RBTX4927-IOC/07 + +NOTES: +SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58 +SouthBridge/ISA/pin=0 no pci irq used by this device +SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14 +SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59 +SouthBridge/PMC/pin=0 no pci irq used by this device +SuperIO/PS2/Keyboard, using INTR via ISA IRQ1 +SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported) +JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6 +*/ + +#include +#include +#include +#include +#ifdef CONFIG_TOSHIBA_FPCIB0 +#include +#endif +#include + +#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG 0 +#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_END 7 + +#define TOSHIBA_RBTX4927_IRQ_IOC_BEG ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG) /* 56 */ +#define TOSHIBA_RBTX4927_IRQ_IOC_END ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_END) /* 63 */ + +#define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC +#define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2) + +extern int tx4927_using_backplane; + +static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq); +static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq); + +#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC" +static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { + .name = TOSHIBA_RBTX4927_IOC_NAME, + .ack = toshiba_rbtx4927_irq_ioc_disable, + .mask = toshiba_rbtx4927_irq_ioc_disable, + .mask_ack = toshiba_rbtx4927_irq_ioc_disable, + .unmask = toshiba_rbtx4927_irq_ioc_enable, +}; +#define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL +#define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL + +int toshiba_rbtx4927_irq_nested(int sw_irq) +{ + u8 level3; + + level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f; + if (level3) { + sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + fls(level3) - 1; +#ifdef CONFIG_TOSHIBA_FPCIB0 + if (sw_irq == TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC && + tx4927_using_backplane) { + int irq = i8259_irq(); + if (irq >= 0) + sw_irq = irq; + } +#endif + } + return (sw_irq); +} + +static struct irqaction toshiba_rbtx4927_irq_ioc_action = { + .handler = no_action, + .flags = IRQF_SHARED, + .mask = CPU_MASK_NONE, + .name = TOSHIBA_RBTX4927_IOC_NAME +}; + +static void __init toshiba_rbtx4927_irq_ioc_init(void) +{ + int i; + + for (i = TOSHIBA_RBTX4927_IRQ_IOC_BEG; + i <= TOSHIBA_RBTX4927_IRQ_IOC_END; i++) + set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type, + handle_level_irq); + + setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC, + &toshiba_rbtx4927_irq_ioc_action); +} + +static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq) +{ + unsigned char v; + + v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); + v |= (1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); + writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); +} + +static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq) +{ + unsigned char v; + + v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); + v &= ~(1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); + writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); + mmiowb(); +} + +void __init arch_init_irq(void) +{ + extern void tx4927_irq_init(void); + + tx4927_irq_init(); + toshiba_rbtx4927_irq_ioc_init(); +#ifdef CONFIG_TOSHIBA_FPCIB0 + if (tx4927_using_backplane) + init_i8259_irqs(); +#endif + /* Onboard 10M Ether: High Active */ + set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH); +} diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c new file mode 100644 index 000000000000..0020bbee838b --- /dev/null +++ b/arch/mips/txx9/rbtx4927/prom.c @@ -0,0 +1,91 @@ +/* + * rbtx4927 specific prom routines + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * Copyright (C) 2004 MontaVista Software Inc. + * Author: Manish Lachwani, mlachwani@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include + +void __init prom_init_cmdline(void) +{ + int argc = (int) fw_arg0; + char **argv = (char **) fw_arg1; + int i; /* Always ignore the "-c" at argv[0] */ + + /* ignore all built-in args if any f/w args given */ + if (argc > 1) { + *arcs_cmdline = '\0'; + } + + for (i = 1; i < argc; i++) { + if (i != 1) { + strcat(arcs_cmdline, " "); + } + strcat(arcs_cmdline, argv[i]); + } +} + +void __init prom_init(void) +{ + extern int tx4927_get_mem_size(void); + extern char* toshiba_name; + int msize; + + prom_init_cmdline(); + + if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) { + mips_machtype = MACH_TOSHIBA_RBTX4927; + toshiba_name = "TX4927"; + } else { + mips_machtype = MACH_TOSHIBA_RBTX4937; + toshiba_name = "TX4937"; + } + + msize = tx4927_get_mem_size(); + add_memory_region(0, msize << 20, BOOT_MEM_RAM); +} + +void __init prom_free_prom_memory(void) +{ +} + +const char *get_system_type(void) +{ + return "Toshiba RBTX4927/RBTX4937"; +} + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c new file mode 100644 index 000000000000..df1b6e99b666 --- /dev/null +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -0,0 +1,703 @@ +/* + * Toshiba rbtx4927 specific setup + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2000 RidgeRun, Inc. + * Author: RidgeRun, Inc. + * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com + * + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * Copyright 2002 MontaVista Software Inc. + * Author: Michael Pruznick, michael_pruznick@mvista.com + * + * Copyright (C) 2000-2001 Toshiba Corporation + * + * Copyright (C) 2004 MontaVista Software Inc. + * Author: Manish Lachwani, mlachwani@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_TOSHIBA_FPCIB0 +#include +#endif +#include +#ifdef CONFIG_SERIAL_TXX9 +#include +#endif + +/* These functions are used for rebooting or halting the machine*/ +extern void toshiba_rbtx4927_restart(char *command); +extern void toshiba_rbtx4927_halt(void); +extern void toshiba_rbtx4927_power_off(void); + +int tx4927_using_backplane = 0; + +extern void toshiba_rbtx4927_irq_setup(void); + +char *prom_getcmdline(void); + +#ifdef CONFIG_PCI +#undef TX4927_SUPPORT_COMMAND_IO +#undef TX4927_SUPPORT_PCI_66 +int tx4927_cpu_clock = 100000000; /* 100MHz */ +unsigned long mips_pci_io_base; +unsigned long mips_pci_io_size; +unsigned long mips_pci_mem_base; +unsigned long mips_pci_mem_size; +/* for legacy I/O, PCI I/O PCI Bus address must be 0 */ +unsigned long mips_pci_io_pciaddr = 0; +unsigned long mips_memory_upper; +static int tx4927_ccfg_toeon = 1; +static int tx4927_pcic_trdyto = 0; /* default: disabled */ +unsigned long tx4927_ce_base[8]; +int tx4927_pci66 = 0; /* 0:auto */ +#endif + +char *toshiba_name = ""; + +#ifdef CONFIG_PCI +extern struct pci_controller tx4927_controller; + +static struct pci_dev *fake_pci_dev(struct pci_controller *hose, + int top_bus, int busnr, int devfn) +{ + static struct pci_dev dev; + static struct pci_bus bus; + + dev.sysdata = (void *)hose; + dev.devfn = devfn; + bus.number = busnr; + bus.ops = hose->pci_ops; + bus.parent = NULL; + dev.bus = &bus; + + return &dev; +} + +#define EARLY_PCI_OP(rw, size, type) \ +static int early_##rw##_config_##size(struct pci_controller *hose, \ + int top_bus, int bus, int devfn, int offset, type value) \ +{ \ + return pci_##rw##_config_##size( \ + fake_pci_dev(hose, top_bus, bus, devfn), \ + offset, value); \ +} + +EARLY_PCI_OP(read, byte, u8 *) +EARLY_PCI_OP(read, dword, u32 *) +EARLY_PCI_OP(write, byte, u8) +EARLY_PCI_OP(write, dword, u32) + +static int __init tx4927_pcibios_init(void) +{ + unsigned int id; + u32 pci_devfn; + int devfn_start = 0; + int devfn_stop = 0xff; + int busno = 0; /* One bus on the Toshiba */ + struct pci_controller *hose = &tx4927_controller; + + for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) { + early_read_config_dword(hose, busno, busno, pci_devfn, + PCI_VENDOR_ID, &id); + + if (id == 0xffffffff) { + continue; + } + + if (id == 0x94601055) { + u8 v08_64; + u32 v32_b0; + u8 v08_e1; + + early_read_config_byte(hose, busno, busno, + pci_devfn, 0x64, &v08_64); + early_read_config_dword(hose, busno, busno, + pci_devfn, 0xb0, &v32_b0); + early_read_config_byte(hose, busno, busno, + pci_devfn, 0xe1, &v08_e1); + + /* serial irq control */ + v08_64 = 0xd0; + + /* serial irq pin */ + v32_b0 |= 0x00010000; + + /* ide irq on isa14 */ + v08_e1 &= 0xf0; + v08_e1 |= 0x0d; + + early_write_config_byte(hose, busno, busno, + pci_devfn, 0x64, v08_64); + early_write_config_dword(hose, busno, busno, + pci_devfn, 0xb0, v32_b0); + early_write_config_byte(hose, busno, busno, + pci_devfn, 0xe1, v08_e1); + } + + if (id == 0x91301055) { + u8 v08_04; + u8 v08_09; + u8 v08_41; + u8 v08_43; + u8 v08_5c; + + early_read_config_byte(hose, busno, busno, + pci_devfn, 0x04, &v08_04); + early_read_config_byte(hose, busno, busno, + pci_devfn, 0x09, &v08_09); + early_read_config_byte(hose, busno, busno, + pci_devfn, 0x41, &v08_41); + early_read_config_byte(hose, busno, busno, + pci_devfn, 0x43, &v08_43); + early_read_config_byte(hose, busno, busno, + pci_devfn, 0x5c, &v08_5c); + + /* enable ide master/io */ + v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO); + + /* enable ide native mode */ + v08_09 |= 0x05; + + /* enable primary ide */ + v08_41 |= 0x80; + + /* enable secondary ide */ + v08_43 |= 0x80; + + /* + * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! + * + * This line of code is intended to provide the user with a work + * around solution to the anomalies cited in SMSC's anomaly sheet + * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"". + * + * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! + */ + v08_5c |= 0x01; + + early_write_config_byte(hose, busno, busno, + pci_devfn, 0x5c, v08_5c); + early_write_config_byte(hose, busno, busno, + pci_devfn, 0x04, v08_04); + early_write_config_byte(hose, busno, busno, + pci_devfn, 0x09, v08_09); + early_write_config_byte(hose, busno, busno, + pci_devfn, 0x41, v08_41); + early_write_config_byte(hose, busno, busno, + pci_devfn, 0x43, v08_43); + } + + } + + register_pci_controller(&tx4927_controller); + return 0; +} + +arch_initcall(tx4927_pcibios_init); + +extern struct resource pci_io_resource; +extern struct resource pci_mem_resource; + +void __init tx4927_pci_setup(void) +{ + static int called = 0; + extern unsigned int tx4927_get_mem_size(void); + + mips_memory_upper = tx4927_get_mem_size() << 20; + mips_memory_upper += KSEG0; + mips_pci_io_base = TX4927_PCIIO; + mips_pci_io_size = TX4927_PCIIO_SIZE; + mips_pci_mem_base = TX4927_PCIMEM; + mips_pci_mem_size = TX4927_PCIMEM_SIZE; + + if (!called) { + printk + ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", + toshiba_name, + (unsigned short) (tx4927_pcicptr->pciid >> 16), + (unsigned short) (tx4927_pcicptr->pciid & 0xffff), + (unsigned short) (tx4927_pcicptr->pciccrev & 0xff), + (!(tx4927_ccfgptr-> + ccfg & TX4927_CCFG_PCIXARB)) ? "External" : + "Internal"); + called = 1; + } + printk("%s PCIC --%s PCICLK:", toshiba_name, + (tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : ""); + if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) { + int pciclk = 0; + if (mips_machtype == MACH_TOSHIBA_RBTX4937) + switch ((unsigned long) tx4927_ccfgptr-> + ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { + case TX4937_CCFG_PCIDIVMODE_4: + pciclk = tx4927_cpu_clock / 4; + break; + case TX4937_CCFG_PCIDIVMODE_4_5: + pciclk = tx4927_cpu_clock * 2 / 9; + break; + case TX4937_CCFG_PCIDIVMODE_5: + pciclk = tx4927_cpu_clock / 5; + break; + case TX4937_CCFG_PCIDIVMODE_5_5: + pciclk = tx4927_cpu_clock * 2 / 11; + break; + case TX4937_CCFG_PCIDIVMODE_8: + pciclk = tx4927_cpu_clock / 8; + break; + case TX4937_CCFG_PCIDIVMODE_9: + pciclk = tx4927_cpu_clock / 9; + break; + case TX4937_CCFG_PCIDIVMODE_10: + pciclk = tx4927_cpu_clock / 10; + break; + case TX4937_CCFG_PCIDIVMODE_11: + pciclk = tx4927_cpu_clock / 11; + break; + } + + else + switch ((unsigned long) tx4927_ccfgptr-> + ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { + case TX4927_CCFG_PCIDIVMODE_2_5: + pciclk = tx4927_cpu_clock * 2 / 5; + break; + case TX4927_CCFG_PCIDIVMODE_3: + pciclk = tx4927_cpu_clock / 3; + break; + case TX4927_CCFG_PCIDIVMODE_5: + pciclk = tx4927_cpu_clock / 5; + break; + case TX4927_CCFG_PCIDIVMODE_6: + pciclk = tx4927_cpu_clock / 6; + break; + } + + printk("Internal(%dMHz)", pciclk / 1000000); + } else + printk("External"); + printk("\n"); + + /* GB->PCI mappings */ + tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4; + tx4927_pcicptr->g2piogbase = mips_pci_io_base | +#ifdef __BIG_ENDIAN + TX4927_PCIC_G2PIOGBASE_ECHG +#else + TX4927_PCIC_G2PIOGBASE_BSDIS +#endif + ; + + tx4927_pcicptr->g2piopbase = 0; + + tx4927_pcicptr->g2pmmask[0] = (mips_pci_mem_size - 1) >> 4; + tx4927_pcicptr->g2pmgbase[0] = mips_pci_mem_base | +#ifdef __BIG_ENDIAN + TX4927_PCIC_G2PMnGBASE_ECHG +#else + TX4927_PCIC_G2PMnGBASE_BSDIS +#endif + ; + tx4927_pcicptr->g2pmpbase[0] = mips_pci_mem_base; + + tx4927_pcicptr->g2pmmask[1] = 0; + tx4927_pcicptr->g2pmgbase[1] = 0; + tx4927_pcicptr->g2pmpbase[1] = 0; + tx4927_pcicptr->g2pmmask[2] = 0; + tx4927_pcicptr->g2pmgbase[2] = 0; + tx4927_pcicptr->g2pmpbase[2] = 0; + + + /* PCI->GB mappings (I/O 256B) */ + tx4927_pcicptr->p2giopbase = 0; /* 256B */ + + /* PCI->GB mappings (MEM 512MB) M0 gets all of memory */ + tx4927_pcicptr->p2gm0plbase = 0; + tx4927_pcicptr->p2gm0pubase = 0; + tx4927_pcicptr->p2gmgbase[0] = 0 | TX4927_PCIC_P2GMnGBASE_TMEMEN | +#ifdef __BIG_ENDIAN + TX4927_PCIC_P2GMnGBASE_TECHG +#else + TX4927_PCIC_P2GMnGBASE_TBSDIS +#endif + ; + + /* PCI->GB mappings (MEM 16MB) -not used */ + tx4927_pcicptr->p2gm1plbase = 0xffffffff; + tx4927_pcicptr->p2gm1pubase = 0xffffffff; + tx4927_pcicptr->p2gmgbase[1] = 0; + + /* PCI->GB mappings (MEM 1MB) -not used */ + tx4927_pcicptr->p2gm2pbase = 0xffffffff; + tx4927_pcicptr->p2gmgbase[2] = 0; + + + /* Enable Initiator Memory 0 Space, I/O Space, Config */ + tx4927_pcicptr->pciccfg &= TX4927_PCIC_PCICCFG_LBWC_MASK; + tx4927_pcicptr->pciccfg |= + TX4927_PCIC_PCICCFG_IMSE0 | TX4927_PCIC_PCICCFG_IISE | + TX4927_PCIC_PCICCFG_ICAE | TX4927_PCIC_PCICCFG_ATR; + + + /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ + tx4927_pcicptr->pcicfg1 = 0; + + if (tx4927_pcic_trdyto >= 0) { + tx4927_pcicptr->g2ptocnt &= ~0xff; + tx4927_pcicptr->g2ptocnt |= (tx4927_pcic_trdyto & 0xff); + } + + /* Clear All Local Bus Status */ + tx4927_pcicptr->pcicstatus = TX4927_PCIC_PCICSTATUS_ALL; + /* Enable All Local Bus Interrupts */ + tx4927_pcicptr->pcicmask = TX4927_PCIC_PCICSTATUS_ALL; + /* Clear All Initiator Status */ + tx4927_pcicptr->g2pstatus = TX4927_PCIC_G2PSTATUS_ALL; + /* Enable All Initiator Interrupts */ + tx4927_pcicptr->g2pmask = TX4927_PCIC_G2PSTATUS_ALL; + /* Clear All PCI Status Error */ + tx4927_pcicptr->pcistatus = + (tx4927_pcicptr->pcistatus & 0x0000ffff) | + (TX4927_PCIC_PCISTATUS_ALL << 16); + /* Enable All PCI Status Error Interrupts */ + tx4927_pcicptr->pcimask = TX4927_PCIC_PCISTATUS_ALL; + + /* PCIC Int => IRC IRQ16 */ + tx4927_pcicptr->pcicfg2 = + (tx4927_pcicptr->pcicfg2 & 0xffffff00) | TX4927_IR_PCIC; + + if (!(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCIXARB)) { + /* XXX */ + } else { + /* Reset Bus Arbiter */ + tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_RPBA; + /* Enable Bus Arbiter */ + tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_PBAEN; + } + + tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | + PCI_COMMAND_PARITY | PCI_COMMAND_SERR; +} +#endif /* CONFIG_PCI */ + +static void __noreturn wait_forever(void) +{ + while (1) + if (cpu_wait) + (*cpu_wait)(); +} + +void toshiba_rbtx4927_restart(char *command) +{ + printk(KERN_NOTICE "System Rebooting...\n"); + + /* enable the s/w reset register */ + writeb(RBTX4927_SW_RESET_ENABLE_SET, RBTX4927_SW_RESET_ENABLE); + + /* wait for enable to be seen */ + while ((readb(RBTX4927_SW_RESET_ENABLE) & + RBTX4927_SW_RESET_ENABLE_SET) == 0x00); + + /* do a s/w reset */ + writeb(RBTX4927_SW_RESET_DO_SET, RBTX4927_SW_RESET_DO); + + /* do something passive while waiting for reset */ + local_irq_disable(); + wait_forever(); + /* no return */ +} + +void toshiba_rbtx4927_halt(void) +{ + printk(KERN_NOTICE "System Halted\n"); + local_irq_disable(); + wait_forever(); + /* no return */ +} + +void toshiba_rbtx4927_power_off(void) +{ + toshiba_rbtx4927_halt(); + /* no return */ +} + +void __init plat_mem_setup(void) +{ + int i; + u32 cp0_config; + char *argptr; + + printk("CPU is %s\n", toshiba_name); + + /* f/w leaves this on at startup */ + clear_c0_status(ST0_ERL); + + /* enable caches -- HCP5 does this, pmon does not */ + cp0_config = read_c0_config(); + cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); + write_c0_config(cp0_config); + + set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET); + + ioport_resource.end = 0xffffffff; + iomem_resource.end = 0xffffffff; + + _machine_restart = toshiba_rbtx4927_restart; + _machine_halt = toshiba_rbtx4927_halt; + pm_power_off = toshiba_rbtx4927_power_off; + + for (i = 0; i < TX4927_NR_TMR; i++) + txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL); + +#ifdef CONFIG_PCI + + /* PCIC */ + /* + * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. + * + * For TX4927: + * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1). + * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5) + * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3) + * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) + * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) + * i.e. S9[3]: ON (83MHz), OFF (100MHz) + * + * For TX4937: + * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) + * PCIDIVMODE[10] is 0. + * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8) + * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4) + * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9) + * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5) + * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) + * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) + * + */ + if (mips_machtype == MACH_TOSHIBA_RBTX4937) + switch ((unsigned long)tx4927_ccfgptr-> + ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { + case TX4937_CCFG_PCIDIVMODE_8: + case TX4937_CCFG_PCIDIVMODE_4: + tx4927_cpu_clock = 266666666; /* 266MHz */ + break; + case TX4937_CCFG_PCIDIVMODE_9: + case TX4937_CCFG_PCIDIVMODE_4_5: + tx4927_cpu_clock = 300000000; /* 300MHz */ + break; + default: + tx4927_cpu_clock = 333333333; /* 333MHz */ + } + else + switch ((unsigned long)tx4927_ccfgptr-> + ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { + case TX4927_CCFG_PCIDIVMODE_2_5: + case TX4927_CCFG_PCIDIVMODE_5: + tx4927_cpu_clock = 166666666; /* 166MHz */ + break; + default: + tx4927_cpu_clock = 200000000; /* 200MHz */ + } + + /* CCFG */ + /* do reset on watchdog */ + tx4927_ccfgptr->ccfg |= TX4927_CCFG_WR; + /* enable Timeout BusError */ + if (tx4927_ccfg_toeon) + tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE; + + tx4927_pci_setup(); + if (tx4927_using_backplane == 1) + printk("backplane board IS installed\n"); + else + printk("No Backplane \n"); + + /* this is on ISA bus behind PCI bus, so need PCI up first */ +#ifdef CONFIG_TOSHIBA_FPCIB0 + if (tx4927_using_backplane) { + smsc_fdc37m81x_init(0x3f0); + smsc_fdc37m81x_config_beg(); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, + SMSC_FDC37M81X_KBD); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, + 1); + smsc_fdc37m81x_config_end(); + } +#endif +#endif /* CONFIG_PCI */ + +#ifdef CONFIG_SERIAL_TXX9 + { + extern int early_serial_txx9_setup(struct uart_port *port); + struct uart_port req; + for(i = 0; i < 2; i++) { + memset(&req, 0, sizeof(req)); + req.line = i; + req.iotype = UPIO_MEM; + req.membase = (char *)(0xff1ff300 + i * 0x100); + req.mapbase = 0xff1ff300 + i * 0x100; + req.irq = TX4927_IRQ_PIC_BEG + 8 + i; + req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; + req.uartclk = 50000000; + early_serial_txx9_setup(&req); + } + } +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + argptr = prom_getcmdline(); + if (strstr(argptr, "console=") == NULL) { + strcat(argptr, " console=ttyS0,38400"); + } +#endif +#endif + +#ifdef CONFIG_ROOT_NFS + argptr = prom_getcmdline(); + if (strstr(argptr, "root=") == NULL) { + strcat(argptr, " root=/dev/nfs rw"); + } +#endif + +#ifdef CONFIG_IP_PNP + argptr = prom_getcmdline(); + if (strstr(argptr, "ip=") == NULL) { + strcat(argptr, " ip=any"); + } +#endif +} + +void __init plat_time_init(void) +{ + mips_hpt_frequency = tx4927_cpu_clock / 2; + if (tx4927_ccfgptr->ccfg & TX4927_CCFG_TINTDIS) + txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL, + TXX9_IRQ_BASE + 17, + 50000000); +} + +static int __init toshiba_rbtx4927_rtc_init(void) +{ + static struct resource __initdata res = { + .start = 0x1c010000, + .end = 0x1c010000 + 0x800 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev = + platform_device_register_simple("rtc-ds1742", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} +device_initcall(toshiba_rbtx4927_rtc_init); + +static int __init rbtx4927_ne_init(void) +{ + static struct resource __initdata res[] = { + { + .start = RBTX4927_RTL_8019_BASE, + .end = RBTX4927_RTL_8019_BASE + 0x20 - 1, + .flags = IORESOURCE_IO, + }, { + .start = RBTX4927_RTL_8019_IRQ, + .flags = IORESOURCE_IRQ, + } + }; + struct platform_device *dev = + platform_device_register_simple("ne", -1, + res, ARRAY_SIZE(res)); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} +device_initcall(rbtx4927_ne_init); + +/* Watchdog support */ + +static int __init txx9_wdt_init(unsigned long base) +{ + struct resource res = { + .start = base, + .end = base + 0x100 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev = + platform_device_register_simple("txx9wdt", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} + +static int __init rbtx4927_wdt_init(void) +{ + return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); +} +device_initcall(rbtx4927_wdt_init); + +/* Minimum CLK support */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "imbus_clk")) + return (struct clk *)50000000; + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/txx9/rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile new file mode 100644 index 000000000000..9dcc52ae5b9d --- /dev/null +++ b/arch/mips/txx9/rbtx4938/Makefile @@ -0,0 +1,3 @@ +obj-y += prom.o setup.o irq.o spi_eeprom.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c new file mode 100644 index 000000000000..f4984820251a --- /dev/null +++ b/arch/mips/txx9/rbtx4938/irq.c @@ -0,0 +1,159 @@ +/* + * Toshiba RBTX4938 specific interrupt handlers + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ + +/* +IRQ Device + +16 TX4938-CP0/00 Software 0 +17 TX4938-CP0/01 Software 1 +18 TX4938-CP0/02 Cascade TX4938-CP0 +19 TX4938-CP0/03 Multiplexed -- do not use +20 TX4938-CP0/04 Multiplexed -- do not use +21 TX4938-CP0/05 Multiplexed -- do not use +22 TX4938-CP0/06 Multiplexed -- do not use +23 TX4938-CP0/07 CPU TIMER + +24 TX4938-PIC/00 +25 TX4938-PIC/01 +26 TX4938-PIC/02 Cascade RBTX4938-IOC +27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet +28 TX4938-PIC/04 +29 TX4938-PIC/05 TX4938 ETH1 +30 TX4938-PIC/06 TX4938 ETH0 +31 TX4938-PIC/07 +32 TX4938-PIC/08 TX4938 SIO 0 +33 TX4938-PIC/09 TX4938 SIO 1 +34 TX4938-PIC/10 TX4938 DMA0 +35 TX4938-PIC/11 TX4938 DMA1 +36 TX4938-PIC/12 TX4938 DMA2 +37 TX4938-PIC/13 TX4938 DMA3 +38 TX4938-PIC/14 +39 TX4938-PIC/15 +40 TX4938-PIC/16 TX4938 PCIC +41 TX4938-PIC/17 TX4938 TMR0 +42 TX4938-PIC/18 TX4938 TMR1 +43 TX4938-PIC/19 TX4938 TMR2 +44 TX4938-PIC/20 +45 TX4938-PIC/21 +46 TX4938-PIC/22 TX4938 PCIERR +47 TX4938-PIC/23 +48 TX4938-PIC/24 +49 TX4938-PIC/25 +50 TX4938-PIC/26 +51 TX4938-PIC/27 +52 TX4938-PIC/28 +53 TX4938-PIC/29 +54 TX4938-PIC/30 +55 TX4938-PIC/31 TX4938 SPI + +56 RBTX4938-IOC/00 PCI-D +57 RBTX4938-IOC/01 PCI-C +58 RBTX4938-IOC/02 PCI-B +59 RBTX4938-IOC/03 PCI-A +60 RBTX4938-IOC/04 RTC +61 RBTX4938-IOC/05 ATA +62 RBTX4938-IOC/06 MODEM +63 RBTX4938-IOC/07 SWINT +*/ +#include +#include +#include + +static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq); +static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq); + +#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC" +static struct irq_chip toshiba_rbtx4938_irq_ioc_type = { + .name = TOSHIBA_RBTX4938_IOC_NAME, + .ack = toshiba_rbtx4938_irq_ioc_disable, + .mask = toshiba_rbtx4938_irq_ioc_disable, + .mask_ack = toshiba_rbtx4938_irq_ioc_disable, + .unmask = toshiba_rbtx4938_irq_ioc_enable, +}; + +int +toshiba_rbtx4938_irq_nested(int sw_irq) +{ + u8 level3; + + level3 = readb(rbtx4938_imstat_addr); + if (level3) + /* must use fls so onboard ATA has priority */ + sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1; + + return sw_irq; +} + +static struct irqaction toshiba_rbtx4938_irq_ioc_action = { + .handler = no_action, + .flags = 0, + .mask = CPU_MASK_NONE, + .name = TOSHIBA_RBTX4938_IOC_NAME, +}; + +/**********************************************************************************/ +/* Functions for ioc */ +/**********************************************************************************/ +static void __init +toshiba_rbtx4938_irq_ioc_init(void) +{ + int i; + + for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG; + i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++) + set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type, + handle_level_irq); + + setup_irq(RBTX4938_IRQ_IOCINT, + &toshiba_rbtx4938_irq_ioc_action); +} + +static void +toshiba_rbtx4938_irq_ioc_enable(unsigned int irq) +{ + unsigned char v; + + v = readb(rbtx4938_imask_addr); + v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); + writeb(v, rbtx4938_imask_addr); + mmiowb(); +} + +static void +toshiba_rbtx4938_irq_ioc_disable(unsigned int irq) +{ + unsigned char v; + + v = readb(rbtx4938_imask_addr); + v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); + writeb(v, rbtx4938_imask_addr); + mmiowb(); +} + +void __init arch_init_irq(void) +{ + extern void tx4938_irq_init(void); + + /* Now, interrupt control disabled, */ + /* all IRC interrupts are masked, */ + /* all IRC interrupt mode are Low Active. */ + + /* mask all IOC interrupts */ + writeb(0, rbtx4938_imask_addr); + + /* clear SoftInt interrupts */ + writeb(0, rbtx4938_softint_addr); + tx4938_irq_init(); + toshiba_rbtx4938_irq_ioc_init(); + /* Onboard 10M Ether: High Active */ + set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH); +} diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c new file mode 100644 index 000000000000..134fcc2dc7d2 --- /dev/null +++ b/arch/mips/txx9/rbtx4938/prom.c @@ -0,0 +1,72 @@ +/* + * rbtx4938 specific prom routines + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ + +#include +#include +#include +#include + +#include +#include +#include + +void __init prom_init_cmdline(void) +{ + int argc = (int) fw_arg0; + char **argv = (char **) fw_arg1; + int i; + + /* ignore all built-in args if any f/w args given */ + if (argc > 1) { + *arcs_cmdline = '\0'; + } + + for (i = 1; i < argc; i++) { + if (i != 1) { + strcat(arcs_cmdline, " "); + } + strcat(arcs_cmdline, argv[i]); + } +} + +void __init prom_init(void) +{ + extern int tx4938_get_mem_size(void); + int msize; +#ifndef CONFIG_TX4938_NAND_BOOT + prom_init_cmdline(); +#endif + + msize = tx4938_get_mem_size(); + add_memory_region(0, msize << 20, BOOT_MEM_RAM); + + return; +} + +void __init prom_free_prom_memory(void) +{ +} + +void __init prom_fixup_mem_map(unsigned long start, unsigned long end) +{ + return; +} + +const char *get_system_type(void) +{ + return "Toshiba RBTX4938"; +} + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c new file mode 100644 index 000000000000..bbd572c9675b --- /dev/null +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -0,0 +1,1122 @@ +/* + * Setup pointers to hardware-dependent routines. + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SERIAL_TXX9 +#include +#endif +#include +#include +#include + +extern char * __init prom_getcmdline(void); +static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr); + +/* These functions are used for rebooting or halting the machine*/ +extern void rbtx4938_machine_restart(char *command); +extern void rbtx4938_machine_halt(void); +extern void rbtx4938_machine_power_off(void); + +/* clocks */ +unsigned int txx9_master_clock; +unsigned int txx9_cpu_clock; +unsigned int txx9_gbus_clock; + +unsigned long rbtx4938_ce_base[8]; +unsigned long rbtx4938_ce_size[8]; +int txboard_pci66_mode; +static int tx4938_pcic_trdyto; /* default: disabled */ +static int tx4938_pcic_retryto; /* default: disabled */ +static int tx4938_ccfg_toeon = 1; + +struct tx4938_pcic_reg *pcicptrs[4] = { + tx4938_pcicptr /* default setting for TX4938 */ +}; + +static struct { + unsigned long base; + unsigned long size; +} phys_regions[16] __initdata; +static int num_phys_regions __initdata; + +#define PHYS_REGION_MINSIZE 0x10000 + +void rbtx4938_machine_halt(void) +{ + printk(KERN_NOTICE "System Halted\n"); + local_irq_disable(); + + while (1) + __asm__(".set\tmips3\n\t" + "wait\n\t" + ".set\tmips0"); +} + +void rbtx4938_machine_power_off(void) +{ + rbtx4938_machine_halt(); + /* no return */ +} + +void rbtx4938_machine_restart(char *command) +{ + local_irq_disable(); + + printk("Rebooting..."); + writeb(1, rbtx4938_softresetlock_addr); + writeb(1, rbtx4938_sfvol_addr); + writeb(1, rbtx4938_softreset_addr); + while(1) + ; +} + +void __init +txboard_add_phys_region(unsigned long base, unsigned long size) +{ + if (num_phys_regions >= ARRAY_SIZE(phys_regions)) { + printk("phys_region overflow\n"); + return; + } + phys_regions[num_phys_regions].base = base; + phys_regions[num_phys_regions].size = size; + num_phys_regions++; +} +unsigned long __init +txboard_find_free_phys_region(unsigned long begin, unsigned long end, + unsigned long size) +{ + unsigned long base; + int i; + + for (base = begin / size * size; base < end; base += size) { + for (i = 0; i < num_phys_regions; i++) { + if (phys_regions[i].size && + base <= phys_regions[i].base + (phys_regions[i].size - 1) && + base + (size - 1) >= phys_regions[i].base) + break; + } + if (i == num_phys_regions) + return base; + } + return 0; +} +unsigned long __init +txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end, + unsigned long *size) +{ + unsigned long sz, base; + for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) { + base = txboard_find_free_phys_region(begin, end, sz); + if (base) { + *size = sz; + return base; + } + } + return 0; +} +unsigned long __init +txboard_request_phys_region_range(unsigned long begin, unsigned long end, + unsigned long size) +{ + unsigned long base; + base = txboard_find_free_phys_region(begin, end, size); + if (base) + txboard_add_phys_region(base, size); + return base; +} +unsigned long __init +txboard_request_phys_region(unsigned long size) +{ + unsigned long base; + unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ + base = txboard_find_free_phys_region(begin, end, size); + if (base) + txboard_add_phys_region(base, size); + return base; +} +unsigned long __init +txboard_request_phys_region_shrink(unsigned long *size) +{ + unsigned long base; + unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ + base = txboard_find_free_phys_region_shrink(begin, end, size); + if (base) + txboard_add_phys_region(base, *size); + return base; +} + +#ifdef CONFIG_PCI +void __init +tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr, + struct pci_controller *channel, + unsigned long pci_io_base, + int extarb) +{ + int i; + + /* Disable All Initiator Space */ + pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)| + TX4938_PCIC_PCICCFG_G2PMEN(1)| + TX4938_PCIC_PCICCFG_G2PMEN(2)| + TX4938_PCIC_PCICCFG_G2PIOEN); + + /* GB->PCI mappings */ + pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4; + pcicptr->g2piogbase = pci_io_base | +#ifdef __BIG_ENDIAN + TX4938_PCIC_G2PIOGBASE_ECHG +#else + TX4938_PCIC_G2PIOGBASE_BSDIS +#endif + ; + pcicptr->g2piopbase = 0; + for (i = 0; i < 3; i++) { + pcicptr->g2pmmask[i] = 0; + pcicptr->g2pmgbase[i] = 0; + pcicptr->g2pmpbase[i] = 0; + } + if (channel->mem_resource->end) { + pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4; + pcicptr->g2pmgbase[0] = channel->mem_resource->start | +#ifdef __BIG_ENDIAN + TX4938_PCIC_G2PMnGBASE_ECHG +#else + TX4938_PCIC_G2PMnGBASE_BSDIS +#endif + ; + pcicptr->g2pmpbase[0] = channel->mem_resource->start; + } + /* PCI->GB mappings (I/O 256B) */ + pcicptr->p2giopbase = 0; /* 256B */ + pcicptr->p2giogbase = 0; + /* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */ + pcicptr->p2gm0plbase = 0; + pcicptr->p2gm0pubase = 0; + pcicptr->p2gmgbase[0] = 0 | + TX4938_PCIC_P2GMnGBASE_TMEMEN | +#ifdef __BIG_ENDIAN + TX4938_PCIC_P2GMnGBASE_TECHG +#else + TX4938_PCIC_P2GMnGBASE_TBSDIS +#endif + ; + /* PCI->GB mappings (MEM 16MB) */ + pcicptr->p2gm1plbase = 0xffffffff; + pcicptr->p2gm1pubase = 0xffffffff; + pcicptr->p2gmgbase[1] = 0; + /* PCI->GB mappings (MEM 1MB) */ + pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */ + pcicptr->p2gmgbase[2] = 0; + + pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK; + /* Enable Initiator Memory Space */ + if (channel->mem_resource->end) + pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0); + /* Enable Initiator I/O Space */ + if (channel->io_resource->end) + pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN; + /* Enable Initiator Config */ + pcicptr->pciccfg |= + TX4938_PCIC_PCICCFG_ICAEN | + TX4938_PCIC_PCICCFG_TCAR; + + /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ + pcicptr->pcicfg1 = 0; + + pcicptr->g2ptocnt &= ~0xffff; + + if (tx4938_pcic_trdyto >= 0) { + pcicptr->g2ptocnt &= ~0xff; + pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff); + } + + if (tx4938_pcic_retryto >= 0) { + pcicptr->g2ptocnt &= ~0xff00; + pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00); + } + + /* Clear All Local Bus Status */ + pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL; + /* Enable All Local Bus Interrupts */ + pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL; + /* Clear All Initiator Status */ + pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL; + /* Enable All Initiator Interrupts */ + pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL; + /* Clear All PCI Status Error */ + pcicptr->pcistatus = + (pcicptr->pcistatus & 0x0000ffff) | + (TX4938_PCIC_PCISTATUS_ALL << 16); + /* Enable All PCI Status Error Interrupts */ + pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL; + + if (!extarb) { + /* Reset Bus Arbiter */ + pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA; + pcicptr->pbabm = 0; + /* Enable Bus Arbiter */ + pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN; + } + + /* PCIC Int => IRC IRQ16 */ + pcicptr->pcicfg2 = + (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC; + + pcicptr->pcistatus = PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | + PCI_COMMAND_PARITY | PCI_COMMAND_SERR; +} + +int __init +tx4938_report_pciclk(void) +{ + unsigned long pcode = TX4938_REV_PCODE(); + int pciclk = 0; + printk("TX%lx PCIC --%s PCICLK:", + pcode, + (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : ""); + if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { + + switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) { + case TX4938_CCFG_PCIDIVMODE_4: + pciclk = txx9_cpu_clock / 4; break; + case TX4938_CCFG_PCIDIVMODE_4_5: + pciclk = txx9_cpu_clock * 2 / 9; break; + case TX4938_CCFG_PCIDIVMODE_5: + pciclk = txx9_cpu_clock / 5; break; + case TX4938_CCFG_PCIDIVMODE_5_5: + pciclk = txx9_cpu_clock * 2 / 11; break; + case TX4938_CCFG_PCIDIVMODE_8: + pciclk = txx9_cpu_clock / 8; break; + case TX4938_CCFG_PCIDIVMODE_9: + pciclk = txx9_cpu_clock / 9; break; + case TX4938_CCFG_PCIDIVMODE_10: + pciclk = txx9_cpu_clock / 10; break; + case TX4938_CCFG_PCIDIVMODE_11: + pciclk = txx9_cpu_clock / 11; break; + } + printk("Internal(%dMHz)", pciclk / 1000000); + } else { + printk("External"); + pciclk = -1; + } + printk("\n"); + return pciclk; +} + +void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr) +{ + pcicptrs[ch] = pcicptr; +} + +struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch) +{ + return pcicptrs[ch]; +} + +static struct pci_dev *fake_pci_dev(struct pci_controller *hose, + int top_bus, int busnr, int devfn) +{ + static struct pci_dev dev; + static struct pci_bus bus; + + dev.sysdata = bus.sysdata = hose; + dev.devfn = devfn; + bus.number = busnr; + bus.ops = hose->pci_ops; + bus.parent = NULL; + dev.bus = &bus; + + return &dev; +} + +#define EARLY_PCI_OP(rw, size, type) \ +static int early_##rw##_config_##size(struct pci_controller *hose, \ + int top_bus, int bus, int devfn, int offset, type value) \ +{ \ + return pci_##rw##_config_##size( \ + fake_pci_dev(hose, top_bus, bus, devfn), \ + offset, value); \ +} + +EARLY_PCI_OP(read, word, u16 *) + +int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus) +{ + u32 pci_devfn; + unsigned short vid; + int devfn_start = 0; + int devfn_stop = 0xff; + int cap66 = -1; + u16 stat; + + printk("PCI: Checking 66MHz capabilities...\n"); + + for (pci_devfn=devfn_start; pci_devfn 0; +} + +int __init +tx4938_pciclk66_setup(void) +{ + int pciclk; + + /* Assert M66EN */ + tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66; + /* Double PCICLK (if possible) */ + if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { + unsigned int pcidivmode = + tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK; + switch (pcidivmode) { + case TX4938_CCFG_PCIDIVMODE_8: + case TX4938_CCFG_PCIDIVMODE_4: + pcidivmode = TX4938_CCFG_PCIDIVMODE_4; + pciclk = txx9_cpu_clock / 4; + break; + case TX4938_CCFG_PCIDIVMODE_9: + case TX4938_CCFG_PCIDIVMODE_4_5: + pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5; + pciclk = txx9_cpu_clock * 2 / 9; + break; + case TX4938_CCFG_PCIDIVMODE_10: + case TX4938_CCFG_PCIDIVMODE_5: + pcidivmode = TX4938_CCFG_PCIDIVMODE_5; + pciclk = txx9_cpu_clock / 5; + break; + case TX4938_CCFG_PCIDIVMODE_11: + case TX4938_CCFG_PCIDIVMODE_5_5: + default: + pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5; + pciclk = txx9_cpu_clock * 2 / 11; + break; + } + tx4938_ccfgptr->ccfg = + (tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK) + | pcidivmode; + printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n", + (unsigned long)tx4938_ccfgptr->ccfg); + } else { + pciclk = -1; + } + return pciclk; +} + +extern struct pci_controller tx4938_pci_controller[]; +static int __init tx4938_pcibios_init(void) +{ + unsigned long mem_base[2]; + unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0, TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */ + unsigned long io_base[2]; + unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0, TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */ + /* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */ + int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB); + + PCIBIOS_MIN_IO = 0x00001000UL; + + mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]); + io_base[0] = txboard_request_phys_region_shrink(&io_size[0]); + + printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", + (unsigned short)(tx4938_pcicptr->pciid >> 16), + (unsigned short)(tx4938_pcicptr->pciid & 0xffff), + (unsigned short)(tx4938_pcicptr->pciccrev & 0xff), + extarb ? "External" : "Internal"); + + /* setup PCI area */ + tx4938_pci_controller[0].io_resource->start = io_base[0]; + tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1; + tx4938_pci_controller[0].mem_resource->start = mem_base[0]; + tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1; + + set_tx4938_pcicptr(0, tx4938_pcicptr); + + register_pci_controller(&tx4938_pci_controller[0]); + + if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) { + printk("TX4938_CCFG_PCI66 already configured\n"); + txboard_pci66_mode = -1; /* already configured */ + } + + /* Reset PCI Bus */ + writeb(0, rbtx4938_pcireset_addr); + /* Reset PCIC */ + tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; + if (txboard_pci66_mode > 0) + tx4938_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; + writeb(1, rbtx4938_pcireset_addr); + mmiowb(); + tx4938_report_pcic_status1(tx4938_pcicptr); + + tx4938_report_pciclk(); + tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); + if (txboard_pci66_mode == 0 && + txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) { + /* Reset PCI Bus */ + writeb(0, rbtx4938_pcireset_addr); + /* Reset PCIC */ + tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; + tx4938_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; + writeb(1, rbtx4938_pcireset_addr); + mmiowb(); + /* Reinitialize PCIC */ + tx4938_report_pciclk(); + tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); + } + + mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]); + io_base[1] = txboard_request_phys_region_shrink(&io_size[1]); + /* Reset PCIC1 */ + tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST; + /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */ + if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD)) + tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66; + else + tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66; + mdelay(10); + /* clear PCIC1 reset */ + tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; + tx4938_report_pcic_status1(tx4938_pcic1ptr); + + printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x", + (unsigned short)(tx4938_pcic1ptr->pciid >> 16), + (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff), + (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff)); + printk("%s PCICLK:%dMHz\n", + (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "", + txx9_gbus_clock / + ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) / + 1000000); + + /* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */ + tx4938_pci_controller[1].io_resource->start = + io_base[1] - io_base[0]; + tx4938_pci_controller[1].io_resource->end = + io_base[1] - io_base[0] + io_size[1] - 1; + tx4938_pci_controller[1].mem_resource->start = mem_base[1]; + tx4938_pci_controller[1].mem_resource->end = + mem_base[1] + mem_size[1] - 1; + set_tx4938_pcicptr(1, tx4938_pcic1ptr); + + register_pci_controller(&tx4938_pci_controller[1]); + + tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb); + + /* map ioport 0 to PCI I/O space address 0 */ + set_io_port_base(KSEG1 + io_base[0]); + + return 0; +} + +arch_initcall(tx4938_pcibios_init); + +#endif /* CONFIG_PCI */ + +/* SPI support */ + +/* chip select for SPI devices */ +#define SEEPROM1_CS 7 /* PIO7 */ +#define SEEPROM2_CS 0 /* IOC */ +#define SEEPROM3_CS 1 /* IOC */ +#define SRTC_CS 2 /* IOC */ + +#ifdef CONFIG_PCI +static int __init rbtx4938_ethaddr_init(void) +{ + unsigned char dat[17]; + unsigned char sum; + int i; + + /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ + if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) { + printk(KERN_ERR "seeprom: read error.\n"); + return -ENODEV; + } else { + if (strcmp(dat, "MAC") != 0) + printk(KERN_WARNING "seeprom: bad signature.\n"); + for (i = 0, sum = 0; i < sizeof(dat); i++) + sum += dat[i]; + if (sum) + printk(KERN_WARNING "seeprom: bad checksum.\n"); + } + for (i = 0; i < 2; i++) { + unsigned int id = + TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0); + struct platform_device *pdev; + if (!(tx4938_ccfgptr->pcfg & + (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL))) + continue; + pdev = platform_device_alloc("tc35815-mac", id); + if (!pdev || + platform_device_add_data(pdev, &dat[4 + 6 * i], 6) || + platform_device_add(pdev)) + platform_device_put(pdev); + } + return 0; +} +device_initcall(rbtx4938_ethaddr_init); +#endif /* CONFIG_PCI */ + +static void __init rbtx4938_spi_setup(void) +{ + /* set SPI_SEL */ + tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL; +} + +static struct resource rbtx4938_fpga_resource; + +static char pcode_str[8]; +static struct resource tx4938_reg_resource = { + .start = TX4938_REG_BASE, + .end = TX4938_REG_BASE + TX4938_REG_SIZE, + .name = pcode_str, + .flags = IORESOURCE_MEM +}; + +void __init tx4938_board_setup(void) +{ + int i; + unsigned long divmode; + int cpuclk = 0; + unsigned long pcode = TX4938_REV_PCODE(); + + ioport_resource.start = 0x1000; + ioport_resource.end = 0xffffffff; + iomem_resource.start = 0x1000; + iomem_resource.end = 0xffffffff; /* expand to 4GB */ + + sprintf(pcode_str, "TX%lx", pcode); + /* SDRAMC,EBUSC are configured by PROM */ + for (i = 0; i < 8; i++) { + if (!(tx4938_ebuscptr->cr[i] & 0x8)) + continue; /* disabled */ + rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i); + txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i)); + } + + /* clocks */ + if (txx9_master_clock) { + /* calculate gbus_clock and cpu_clock_freq from master_clock */ + divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; + switch (divmode) { + case TX4938_CCFG_DIVMODE_8: + case TX4938_CCFG_DIVMODE_10: + case TX4938_CCFG_DIVMODE_12: + case TX4938_CCFG_DIVMODE_16: + case TX4938_CCFG_DIVMODE_18: + txx9_gbus_clock = txx9_master_clock * 4; break; + default: + txx9_gbus_clock = txx9_master_clock; + } + switch (divmode) { + case TX4938_CCFG_DIVMODE_2: + case TX4938_CCFG_DIVMODE_8: + cpuclk = txx9_gbus_clock * 2; break; + case TX4938_CCFG_DIVMODE_2_5: + case TX4938_CCFG_DIVMODE_10: + cpuclk = txx9_gbus_clock * 5 / 2; break; + case TX4938_CCFG_DIVMODE_3: + case TX4938_CCFG_DIVMODE_12: + cpuclk = txx9_gbus_clock * 3; break; + case TX4938_CCFG_DIVMODE_4: + case TX4938_CCFG_DIVMODE_16: + cpuclk = txx9_gbus_clock * 4; break; + case TX4938_CCFG_DIVMODE_4_5: + case TX4938_CCFG_DIVMODE_18: + cpuclk = txx9_gbus_clock * 9 / 2; break; + } + txx9_cpu_clock = cpuclk; + } else { + if (txx9_cpu_clock == 0) { + txx9_cpu_clock = 300000000; /* 300MHz */ + } + /* calculate gbus_clock and master_clock from cpu_clock_freq */ + cpuclk = txx9_cpu_clock; + divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; + switch (divmode) { + case TX4938_CCFG_DIVMODE_2: + case TX4938_CCFG_DIVMODE_8: + txx9_gbus_clock = cpuclk / 2; break; + case TX4938_CCFG_DIVMODE_2_5: + case TX4938_CCFG_DIVMODE_10: + txx9_gbus_clock = cpuclk * 2 / 5; break; + case TX4938_CCFG_DIVMODE_3: + case TX4938_CCFG_DIVMODE_12: + txx9_gbus_clock = cpuclk / 3; break; + case TX4938_CCFG_DIVMODE_4: + case TX4938_CCFG_DIVMODE_16: + txx9_gbus_clock = cpuclk / 4; break; + case TX4938_CCFG_DIVMODE_4_5: + case TX4938_CCFG_DIVMODE_18: + txx9_gbus_clock = cpuclk * 2 / 9; break; + } + switch (divmode) { + case TX4938_CCFG_DIVMODE_8: + case TX4938_CCFG_DIVMODE_10: + case TX4938_CCFG_DIVMODE_12: + case TX4938_CCFG_DIVMODE_16: + case TX4938_CCFG_DIVMODE_18: + txx9_master_clock = txx9_gbus_clock / 4; break; + default: + txx9_master_clock = txx9_gbus_clock; + } + } + /* change default value to udelay/mdelay take reasonable time */ + loops_per_jiffy = txx9_cpu_clock / HZ / 2; + + /* CCFG */ + /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */ + tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW; + /* do reset on watchdog */ + tx4938_ccfgptr->ccfg |= TX4938_CCFG_WR; + /* clear PCIC1 reset */ + if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST) + tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; + + /* enable Timeout BusError */ + if (tx4938_ccfg_toeon) + tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE; + + /* DMA selection */ + tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL; + + /* Use external clock for external arbiter */ + if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB)) + tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL; + + printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n", + pcode_str, + cpuclk / 1000000, txx9_master_clock / 1000000, + (unsigned long)tx4938_ccfgptr->crir, + tx4938_ccfgptr->ccfg, + tx4938_ccfgptr->pcfg); + + printk("%s SDRAMC --", pcode_str); + for (i = 0; i < 4; i++) { + unsigned long long cr = tx4938_sdramcptr->cr[i]; + unsigned long ram_base, ram_size; + if (!((unsigned long)cr & 0x00000400)) + continue; /* disabled */ + ram_base = (unsigned long)(cr >> 49) << 21; + ram_size = ((unsigned long)(cr >> 33) + 1) << 21; + if (ram_base >= 0x20000000) + continue; /* high memory (ignore) */ + printk(" CR%d:%016Lx", i, cr); + txboard_add_phys_region(ram_base, ram_size); + } + printk(" TR:%09Lx\n", tx4938_sdramcptr->tr); + + /* SRAM */ + if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) { + unsigned int size = 0x800; + unsigned long base = + (tx4938_sramcptr->cr >> (39-11)) & ~(size - 1); + txboard_add_phys_region(base, size); + } + + /* TMR */ + for (i = 0; i < TX4938_NR_TMR; i++) + txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL); + + /* enable DMA */ + for (i = 0; i < 2; i++) + ____raw_writeq(TX4938_DMA_MCR_MSTEN, + (void __iomem *)(TX4938_DMA_REG(i) + 0x50)); + + /* PIO */ + __raw_writel(0, &tx4938_pioptr->maskcpu); + __raw_writel(0, &tx4938_pioptr->maskext); + + /* TX4938 internal registers */ + if (request_resource(&iomem_resource, &tx4938_reg_resource)) + printk("request resource for internal registers failed\n"); +} + +#ifdef CONFIG_PCI +static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr) +{ + unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16); + unsigned long g2pstatus = pcicptr->g2pstatus; + unsigned long pcicstatus = pcicptr->pcicstatus; + static struct { + unsigned long flag; + const char *str; + } pcistat_tbl[] = { + { PCI_STATUS_DETECTED_PARITY, "DetectedParityError" }, + { PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" }, + { PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" }, + { PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" }, + { PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" }, + { PCI_STATUS_PARITY, "MasterParityError" }, + }, g2pstat_tbl[] = { + { TX4938_PCIC_G2PSTATUS_TTOE, "TIOE" }, + { TX4938_PCIC_G2PSTATUS_RTOE, "RTOE" }, + }, pcicstat_tbl[] = { + { TX4938_PCIC_PCICSTATUS_PME, "PME" }, + { TX4938_PCIC_PCICSTATUS_TLB, "TLB" }, + { TX4938_PCIC_PCICSTATUS_NIB, "NIB" }, + { TX4938_PCIC_PCICSTATUS_ZIB, "ZIB" }, + { TX4938_PCIC_PCICSTATUS_PERR, "PERR" }, + { TX4938_PCIC_PCICSTATUS_SERR, "SERR" }, + { TX4938_PCIC_PCICSTATUS_GBE, "GBE" }, + { TX4938_PCIC_PCICSTATUS_IWB, "IWB" }, + }; + int i; + + printk("pcistat:%04x(", pcistatus); + for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++) + if (pcistatus & pcistat_tbl[i].flag) + printk("%s ", pcistat_tbl[i].str); + printk("), g2pstatus:%08lx(", g2pstatus); + for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++) + if (g2pstatus & g2pstat_tbl[i].flag) + printk("%s ", g2pstat_tbl[i].str); + printk("), pcicstatus:%08lx(", pcicstatus); + for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++) + if (pcicstatus & pcicstat_tbl[i].flag) + printk("%s ", pcicstat_tbl[i].str); + printk(")\n"); +} + +void tx4938_report_pcic_status(void) +{ + int i; + struct tx4938_pcic_reg *pcicptr; + for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++) + tx4938_report_pcic_status1(pcicptr); +} + +#endif /* CONFIG_PCI */ + +void __init plat_time_init(void) +{ + mips_hpt_frequency = txx9_cpu_clock / 2; + if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS) + txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL, + TXX9_IRQ_BASE + TX4938_IR_TMR(0), + txx9_gbus_clock / 2); +} + +void __init plat_mem_setup(void) +{ + unsigned long long pcfg; + char *argptr; + + iomem_resource.end = 0xffffffff; /* 4GB */ + + if (txx9_master_clock == 0) + txx9_master_clock = 25000000; /* 25MHz */ + tx4938_board_setup(); +#ifndef CONFIG_PCI + set_io_port_base(RBTX4938_ETHER_BASE); +#endif + +#ifdef CONFIG_SERIAL_TXX9 + { + extern int early_serial_txx9_setup(struct uart_port *port); + int i; + struct uart_port req; + for(i = 0; i < 2; i++) { + memset(&req, 0, sizeof(req)); + req.line = i; + req.iotype = UPIO_MEM; + req.membase = (char *)(0xff1ff300 + i * 0x100); + req.mapbase = 0xff1ff300 + i * 0x100; + req.irq = RBTX4938_IRQ_IRC_SIO(i); + req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; + req.uartclk = 50000000; + early_serial_txx9_setup(&req); + } + } +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + argptr = prom_getcmdline(); + if (strstr(argptr, "console=") == NULL) { + strcat(argptr, " console=ttyS0,38400"); + } +#endif +#endif + +#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 + printk("PIOSEL: disabling both ata and nand selection\n"); + local_irq_disable(); + tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); +#endif + +#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND + printk("PIOSEL: enabling nand selection\n"); + tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL; + tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL; +#endif + +#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA + printk("PIOSEL: enabling ata selection\n"); + tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL; + tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL; +#endif + +#ifdef CONFIG_IP_PNP + argptr = prom_getcmdline(); + if (strstr(argptr, "ip=") == NULL) { + strcat(argptr, " ip=any"); + } +#endif + + +#ifdef CONFIG_FB + { + conswitchp = &dummy_con; + } +#endif + + rbtx4938_spi_setup(); + pcfg = tx4938_ccfgptr->pcfg; /* updated */ + /* fixup piosel */ + if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == + TX4938_PCFG_ATA_SEL) + writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04, + rbtx4938_piosel_addr); + else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == + TX4938_PCFG_NDF_SEL) + writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08, + rbtx4938_piosel_addr); + else + writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04), + rbtx4938_piosel_addr); + + rbtx4938_fpga_resource.name = "FPGA Registers"; + rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR); + rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff; + rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY; + if (request_resource(&iomem_resource, &rbtx4938_fpga_resource)) + printk("request resource for fpga failed\n"); + + _machine_restart = rbtx4938_machine_restart; + _machine_halt = rbtx4938_machine_halt; + pm_power_off = rbtx4938_machine_power_off; + + writeb(0xff, rbtx4938_led_addr); + printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", + readb(rbtx4938_fpga_rev_addr), + readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr)); +} + +static int __init rbtx4938_ne_init(void) +{ + struct resource res[] = { + { + .start = RBTX4938_RTL_8019_BASE, + .end = RBTX4938_RTL_8019_BASE + 0x20 - 1, + .flags = IORESOURCE_IO, + }, { + .start = RBTX4938_RTL_8019_IRQ, + .flags = IORESOURCE_IRQ, + } + }; + struct platform_device *dev = + platform_device_register_simple("ne", -1, + res, ARRAY_SIZE(res)); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} +device_initcall(rbtx4938_ne_init); + +/* GPIO support */ + +int gpio_to_irq(unsigned gpio) +{ + return -EINVAL; +} + +int irq_to_gpio(unsigned irq) +{ + return -EINVAL; +} + +static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock); + +static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + u8 val; + unsigned long flags; + spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags); + val = readb(rbtx4938_spics_addr); + if (value) + val |= 1 << offset; + else + val &= ~(1 << offset); + writeb(val, rbtx4938_spics_addr); + mmiowb(); + spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags); +} + +static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip, + unsigned int offset, int value) +{ + rbtx4938_spi_gpio_set(chip, offset, value); + return 0; +} + +static struct gpio_chip rbtx4938_spi_gpio_chip = { + .set = rbtx4938_spi_gpio_set, + .direction_output = rbtx4938_spi_gpio_dir_out, + .label = "RBTX4938-SPICS", + .base = 16, + .ngpio = 3, +}; + +/* SPI support */ + +static void __init txx9_spi_init(unsigned long base, int irq) +{ + struct resource res[] = { + { + .start = base, + .end = base + 0x20 - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .flags = IORESOURCE_IRQ, + }, + }; + platform_device_register_simple("spi_txx9", 0, + res, ARRAY_SIZE(res)); +} + +static int __init rbtx4938_spi_init(void) +{ + struct spi_board_info srtc_info = { + .modalias = "rtc-rs5c348", + .max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */ + .bus_num = 0, + .chip_select = 16 + SRTC_CS, + /* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS */ + .mode = SPI_MODE_1 | SPI_CS_HIGH, + }; + spi_register_board_info(&srtc_info, 1); + spi_eeprom_register(SEEPROM1_CS); + spi_eeprom_register(16 + SEEPROM2_CS); + spi_eeprom_register(16 + SEEPROM3_CS); + gpio_request(16 + SRTC_CS, "rtc-rs5c348"); + gpio_direction_output(16 + SRTC_CS, 0); + gpio_request(SEEPROM1_CS, "seeprom1"); + gpio_direction_output(SEEPROM1_CS, 1); + gpio_request(16 + SEEPROM2_CS, "seeprom2"); + gpio_direction_output(16 + SEEPROM2_CS, 1); + gpio_request(16 + SEEPROM3_CS, "seeprom3"); + gpio_direction_output(16 + SEEPROM3_CS, 1); + txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI); + return 0; +} + +static int __init rbtx4938_arch_init(void) +{ + txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16); + gpiochip_add(&rbtx4938_spi_gpio_chip); + return rbtx4938_spi_init(); +} +arch_initcall(rbtx4938_arch_init); + +/* Watchdog support */ + +static int __init txx9_wdt_init(unsigned long base) +{ + struct resource res = { + .start = base, + .end = base + 0x100 - 1, + .flags = IORESOURCE_MEM, + }; + struct platform_device *dev = + platform_device_register_simple("txx9wdt", -1, &res, 1); + return IS_ERR(dev) ? PTR_ERR(dev) : 0; +} + +static int __init rbtx4938_wdt_init(void) +{ + return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); +} +device_initcall(rbtx4938_wdt_init); + +/* Minimum CLK support */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "spi-baseclk")) + return (struct clk *)(txx9_gbus_clock / 2 / 4); + if (!strcmp(id, "imbus_clk")) + return (struct clk *)(txx9_gbus_clock / 2); + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/txx9/rbtx4938/spi_eeprom.c b/arch/mips/txx9/rbtx4938/spi_eeprom.c new file mode 100644 index 000000000000..a7ea8b041c1d --- /dev/null +++ b/arch/mips/txx9/rbtx4938/spi_eeprom.c @@ -0,0 +1,99 @@ +/* + * spi_eeprom.c + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#include +#include +#include +#include +#include + +#define AT250X0_PAGE_SIZE 8 + +/* register board information for at25 driver */ +int __init spi_eeprom_register(int chipid) +{ + static struct spi_eeprom eeprom = { + .name = "at250x0", + .byte_len = 128, + .page_size = AT250X0_PAGE_SIZE, + .flags = EE_ADDR1, + }; + struct spi_board_info info = { + .modalias = "at25", + .max_speed_hz = 1500000, /* 1.5Mbps */ + .bus_num = 0, + .chip_select = chipid, + .platform_data = &eeprom, + /* Mode 0: High-Active, Sample-Then-Shift */ + }; + + return spi_register_board_info(&info, 1); +} + +/* simple temporary spi driver to provide early access to seeprom. */ + +static struct read_param { + int chipid; + int address; + unsigned char *buf; + int len; +} *read_param; + +static int __init early_seeprom_probe(struct spi_device *spi) +{ + int stat = 0; + u8 cmd[2]; + int len = read_param->len; + char *buf = read_param->buf; + int address = read_param->address; + + dev_info(&spi->dev, "spiclk %u KHz.\n", + (spi->max_speed_hz + 500) / 1000); + if (read_param->chipid != spi->chip_select) + return -ENODEV; + while (len > 0) { + /* spi_write_then_read can only work with small chunk */ + int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE; + cmd[0] = 0x03; /* AT25_READ */ + cmd[1] = address; + stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c); + buf += c; + len -= c; + address += c; + } + return stat; +} + +static struct spi_driver early_seeprom_driver __initdata = { + .driver = { + .name = "at25", + .owner = THIS_MODULE, + }, + .probe = early_seeprom_probe, +}; + +int __init spi_eeprom_read(int chipid, int address, + unsigned char *buf, int len) +{ + int ret; + struct read_param param = { + .chipid = chipid, + .address = address, + .buf = buf, + .len = len + }; + + read_param = ¶m; + ret = spi_register_driver(&early_seeprom_driver); + if (!ret) + spi_unregister_driver(&early_seeprom_driver); + return ret; +} diff --git a/include/asm-mips/jmr3927/jmr3927.h b/include/asm-mips/jmr3927/jmr3927.h deleted file mode 100644 index a162268f17df..000000000000 --- a/include/asm-mips/jmr3927/jmr3927.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Defines for the TJSYS JMR-TX3927 - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000-2001 Toshiba Corporation - */ -#ifndef __ASM_TX3927_JMR3927_H -#define __ASM_TX3927_JMR3927_H - -#include -#include -#include -#include - -/* CS */ -#define JMR3927_ROMCE0 0x1fc00000 /* 4M */ -#define JMR3927_ROMCE1 0x1e000000 /* 4M */ -#define JMR3927_ROMCE2 0x14000000 /* 16M */ -#define JMR3927_ROMCE3 0x10000000 /* 64M */ -#define JMR3927_ROMCE5 0x1d000000 /* 4M */ -#define JMR3927_SDCS0 0x00000000 /* 32M */ -#define JMR3927_SDCS1 0x02000000 /* 32M */ -/* PCI Direct Mappings */ - -#define JMR3927_PCIMEM 0x08000000 -#define JMR3927_PCIMEM_SIZE 0x08000000 /* 128M */ -#define JMR3927_PCIIO 0x15000000 -#define JMR3927_PCIIO_SIZE 0x01000000 /* 16M */ - -#define JMR3927_SDRAM_SIZE 0x02000000 /* 32M */ -#define JMR3927_PORT_BASE KSEG1 - -/* Address map (virtual address) */ -#define JMR3927_ROM0_BASE (KSEG1 + JMR3927_ROMCE0) -#define JMR3927_ROM1_BASE (KSEG1 + JMR3927_ROMCE1) -#define JMR3927_IOC_BASE (KSEG1 + JMR3927_ROMCE2) -#define JMR3927_PCIMEM_BASE (KSEG1 + JMR3927_PCIMEM) -#define JMR3927_PCIIO_BASE (KSEG1 + JMR3927_PCIIO) - -#define JMR3927_IOC_REV_ADDR (JMR3927_IOC_BASE + 0x00000000) -#define JMR3927_IOC_NVRAMB_ADDR (JMR3927_IOC_BASE + 0x00010000) -#define JMR3927_IOC_LED_ADDR (JMR3927_IOC_BASE + 0x00020000) -#define JMR3927_IOC_DIPSW_ADDR (JMR3927_IOC_BASE + 0x00030000) -#define JMR3927_IOC_BREV_ADDR (JMR3927_IOC_BASE + 0x00040000) -#define JMR3927_IOC_DTR_ADDR (JMR3927_IOC_BASE + 0x00050000) -#define JMR3927_IOC_INTS1_ADDR (JMR3927_IOC_BASE + 0x00080000) -#define JMR3927_IOC_INTS2_ADDR (JMR3927_IOC_BASE + 0x00090000) -#define JMR3927_IOC_INTM_ADDR (JMR3927_IOC_BASE + 0x000a0000) -#define JMR3927_IOC_INTP_ADDR (JMR3927_IOC_BASE + 0x000b0000) -#define JMR3927_IOC_RESET_ADDR (JMR3927_IOC_BASE + 0x000f0000) - -/* Flash ROM */ -#define JMR3927_FLASH_BASE (JMR3927_ROM0_BASE) -#define JMR3927_FLASH_SIZE 0x00400000 - -/* bits for IOC_REV/IOC_BREV (high byte) */ -#define JMR3927_IDT_MASK 0xfc -#define JMR3927_REV_MASK 0x03 -#define JMR3927_IOC_IDT 0xe0 - -/* bits for IOC_INTS1/IOC_INTS2/IOC_INTM/IOC_INTP (high byte) */ -#define JMR3927_IOC_INTB_PCIA 0 -#define JMR3927_IOC_INTB_PCIB 1 -#define JMR3927_IOC_INTB_PCIC 2 -#define JMR3927_IOC_INTB_PCID 3 -#define JMR3927_IOC_INTB_MODEM 4 -#define JMR3927_IOC_INTB_INT6 5 -#define JMR3927_IOC_INTB_INT7 6 -#define JMR3927_IOC_INTB_SOFT 7 -#define JMR3927_IOC_INTF_PCIA (1 << JMR3927_IOC_INTF_PCIA) -#define JMR3927_IOC_INTF_PCIB (1 << JMR3927_IOC_INTB_PCIB) -#define JMR3927_IOC_INTF_PCIC (1 << JMR3927_IOC_INTB_PCIC) -#define JMR3927_IOC_INTF_PCID (1 << JMR3927_IOC_INTB_PCID) -#define JMR3927_IOC_INTF_MODEM (1 << JMR3927_IOC_INTB_MODEM) -#define JMR3927_IOC_INTF_INT6 (1 << JMR3927_IOC_INTB_INT6) -#define JMR3927_IOC_INTF_INT7 (1 << JMR3927_IOC_INTB_INT7) -#define JMR3927_IOC_INTF_SOFT (1 << JMR3927_IOC_INTB_SOFT) - -/* bits for IOC_RESET (high byte) */ -#define JMR3927_IOC_RESET_CPU 1 -#define JMR3927_IOC_RESET_PCI 2 - -#if defined(__BIG_ENDIAN) -#define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned char *)(a)) = (d)) -#define jmr3927_ioc_reg_in(a) (*(volatile unsigned char *)(a)) -#elif defined(__LITTLE_ENDIAN) -#define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned char *)((a)^1)) = (d)) -#define jmr3927_ioc_reg_in(a) (*(volatile unsigned char *)((a)^1)) -#else -#error "No Endian" -#endif - -/* LED macro */ -#define jmr3927_led_set(n/*0-16*/) jmr3927_ioc_reg_out(~(n), JMR3927_IOC_LED_ADDR) - -#define jmr3927_led_and_set(n/*0-16*/) jmr3927_ioc_reg_out((~(n)) & jmr3927_ioc_reg_in(JMR3927_IOC_LED_ADDR), JMR3927_IOC_LED_ADDR) - -/* DIPSW4 macro */ -#define jmr3927_dipsw1() (gpio_get_value(11) == 0) -#define jmr3927_dipsw2() (gpio_get_value(10) == 0) -#define jmr3927_dipsw3() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 2) == 0) -#define jmr3927_dipsw4() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 1) == 0) - -/* - * IRQ mappings - */ - -/* These are the virtual IRQ numbers, we divide all IRQ's into - * 'spaces', the 'space' determines where and how to enable/disable - * that particular IRQ on an JMR machine. Add new 'spaces' as new - * IRQ hardware is supported. - */ -#define JMR3927_NR_IRQ_IRC 16 /* On-Chip IRC */ -#define JMR3927_NR_IRQ_IOC 8 /* PCI/MODEM/INT[6:7] */ - -#define JMR3927_IRQ_IRC TXX9_IRQ_BASE -#define JMR3927_IRQ_IOC (JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC) -#define JMR3927_IRQ_END (JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC) - -#define JMR3927_IRQ_IRC_INT0 (JMR3927_IRQ_IRC + TX3927_IR_INT0) -#define JMR3927_IRQ_IRC_INT1 (JMR3927_IRQ_IRC + TX3927_IR_INT1) -#define JMR3927_IRQ_IRC_INT2 (JMR3927_IRQ_IRC + TX3927_IR_INT2) -#define JMR3927_IRQ_IRC_INT3 (JMR3927_IRQ_IRC + TX3927_IR_INT3) -#define JMR3927_IRQ_IRC_INT4 (JMR3927_IRQ_IRC + TX3927_IR_INT4) -#define JMR3927_IRQ_IRC_INT5 (JMR3927_IRQ_IRC + TX3927_IR_INT5) -#define JMR3927_IRQ_IRC_SIO0 (JMR3927_IRQ_IRC + TX3927_IR_SIO0) -#define JMR3927_IRQ_IRC_SIO1 (JMR3927_IRQ_IRC + TX3927_IR_SIO1) -#define JMR3927_IRQ_IRC_SIO(ch) (JMR3927_IRQ_IRC + TX3927_IR_SIO(ch)) -#define JMR3927_IRQ_IRC_DMA (JMR3927_IRQ_IRC + TX3927_IR_DMA) -#define JMR3927_IRQ_IRC_PIO (JMR3927_IRQ_IRC + TX3927_IR_PIO) -#define JMR3927_IRQ_IRC_PCI (JMR3927_IRQ_IRC + TX3927_IR_PCI) -#define JMR3927_IRQ_IRC_TMR(ch) (JMR3927_IRQ_IRC + TX3927_IR_TMR(ch)) -#define JMR3927_IRQ_IOC_PCIA (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIA) -#define JMR3927_IRQ_IOC_PCIB (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIB) -#define JMR3927_IRQ_IOC_PCIC (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIC) -#define JMR3927_IRQ_IOC_PCID (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCID) -#define JMR3927_IRQ_IOC_MODEM (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_MODEM) -#define JMR3927_IRQ_IOC_INT6 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT6) -#define JMR3927_IRQ_IOC_INT7 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT7) -#define JMR3927_IRQ_IOC_SOFT (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_SOFT) - -/* IOC (PCI, MODEM) */ -#define JMR3927_IRQ_IOCINT JMR3927_IRQ_IRC_INT1 -/* TC35815 100M Ether (JMR-TX3912:JPW4:2-3 Short) */ -#define JMR3927_IRQ_ETHER0 JMR3927_IRQ_IRC_INT3 - -/* Clocks */ -#define JMR3927_CORECLK 132710400 /* 132.7MHz */ -#define JMR3927_GBUSCLK (JMR3927_CORECLK / 2) /* 66.35MHz */ -#define JMR3927_IMCLK (JMR3927_CORECLK / 4) /* 33.17MHz */ - -/* - * TX3927 Pin Configuration: - * - * PCFG bits Avail Dead - * SELSIO[1:0]:11 RXD[1:0], TXD[1:0] PIO[6:3] - * SELSIOC[0]:1 CTS[0], RTS[0] INT[5:4] - * SELSIOC[1]:0,SELDSF:0, GSDAO[0],GPCST[3] CTS[1], RTS[1],DSF, - * GDBGE* PIO[2:1] - * SELDMA[2]:1 DMAREQ[2],DMAACK[2] PIO[13:12] - * SELTMR[2:0]:000 TIMER[1:0] - * SELCS:0,SELDMA[1]:0 PIO[11;10] SDCS_CE[7:6], - * DMAREQ[1],DMAACK[1] - * SELDMA[0]:1 DMAREQ[0],DMAACK[0] PIO[9:8] - * SELDMA[3]:1 DMAREQ[3],DMAACK[3] PIO[15:14] - * SELDONE:1 DMADONE PIO[7] - * - * Usable pins are: - * RXD[1;0],TXD[1:0],CTS[0],RTS[0], - * DMAREQ[0,2,3],DMAACK[0,2,3],DMADONE,PIO[0,10,11] - * INT[3:0] - */ - -#endif /* __ASM_TX3927_JMR3927_H */ diff --git a/include/asm-mips/jmr3927/tx3927.h b/include/asm-mips/jmr3927/tx3927.h deleted file mode 100644 index fb580333c102..000000000000 --- a/include/asm-mips/jmr3927/tx3927.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Toshiba Corporation - */ -#ifndef __ASM_TX3927_H -#define __ASM_TX3927_H - -#include - -#define TX3927_SDRAMC_REG 0xfffe8000 -#define TX3927_ROMC_REG 0xfffe9000 -#define TX3927_DMA_REG 0xfffeb000 -#define TX3927_IRC_REG 0xfffec000 -#define TX3927_PCIC_REG 0xfffed000 -#define TX3927_CCFG_REG 0xfffee000 -#define TX3927_NR_TMR 3 -#define TX3927_TMR_REG(ch) (0xfffef000 + (ch) * 0x100) -#define TX3927_NR_SIO 2 -#define TX3927_SIO_REG(ch) (0xfffef300 + (ch) * 0x100) -#define TX3927_PIO_REG 0xfffef500 - -struct tx3927_sdramc_reg { - volatile unsigned long cr[8]; - volatile unsigned long tr[3]; - volatile unsigned long cmd; - volatile unsigned long smrs[2]; -}; - -struct tx3927_romc_reg { - volatile unsigned long cr[8]; -}; - -struct tx3927_dma_reg { - struct tx3927_dma_ch_reg { - volatile unsigned long cha; - volatile unsigned long sar; - volatile unsigned long dar; - volatile unsigned long cntr; - volatile unsigned long sair; - volatile unsigned long dair; - volatile unsigned long ccr; - volatile unsigned long csr; - } ch[4]; - volatile unsigned long dbr[8]; - volatile unsigned long tdhr; - volatile unsigned long mcr; - volatile unsigned long unused0; -}; - -#include - -#ifdef __BIG_ENDIAN -#define endian_def_s2(e1, e2) \ - volatile unsigned short e1, e2 -#define endian_def_sb2(e1, e2, e3) \ - volatile unsigned short e1;volatile unsigned char e2, e3 -#define endian_def_b2s(e1, e2, e3) \ - volatile unsigned char e1, e2;volatile unsigned short e3 -#define endian_def_b4(e1, e2, e3, e4) \ - volatile unsigned char e1, e2, e3, e4 -#else -#define endian_def_s2(e1, e2) \ - volatile unsigned short e2, e1 -#define endian_def_sb2(e1, e2, e3) \ - volatile unsigned char e3, e2;volatile unsigned short e1 -#define endian_def_b2s(e1, e2, e3) \ - volatile unsigned short e3;volatile unsigned char e2, e1 -#define endian_def_b4(e1, e2, e3, e4) \ - volatile unsigned char e4, e3, e2, e1 -#endif - -struct tx3927_pcic_reg { - endian_def_s2(did, vid); - endian_def_s2(pcistat, pcicmd); - endian_def_b4(cc, scc, rpli, rid); - endian_def_b4(unused0, ht, mlt, cls); - volatile unsigned long ioba; /* +10 */ - volatile unsigned long mba; - volatile unsigned long unused1[5]; - endian_def_s2(svid, ssvid); - volatile unsigned long unused2; /* +30 */ - endian_def_sb2(unused3, unused4, capptr); - volatile unsigned long unused5; - endian_def_b4(ml, mg, ip, il); - volatile unsigned long unused6; /* +40 */ - volatile unsigned long istat; - volatile unsigned long iim; - volatile unsigned long rrt; - volatile unsigned long unused7[3]; /* +50 */ - volatile unsigned long ipbmma; - volatile unsigned long ipbioma; /* +60 */ - volatile unsigned long ilbmma; - volatile unsigned long ilbioma; - volatile unsigned long unused8[9]; - volatile unsigned long tc; /* +90 */ - volatile unsigned long tstat; - volatile unsigned long tim; - volatile unsigned long tccmd; - volatile unsigned long pcirrt; /* +a0 */ - volatile unsigned long pcirrt_cmd; - volatile unsigned long pcirrdt; - volatile unsigned long unused9[3]; - volatile unsigned long tlboap; - volatile unsigned long tlbiap; - volatile unsigned long tlbmma; /* +c0 */ - volatile unsigned long tlbioma; - volatile unsigned long sc_msg; - volatile unsigned long sc_be; - volatile unsigned long tbl; /* +d0 */ - volatile unsigned long unused10[3]; - volatile unsigned long pwmng; /* +e0 */ - volatile unsigned long pwmngs; - volatile unsigned long unused11[6]; - volatile unsigned long req_trace; /* +100 */ - volatile unsigned long pbapmc; - volatile unsigned long pbapms; - volatile unsigned long pbapmim; - volatile unsigned long bm; /* +110 */ - volatile unsigned long cpcibrs; - volatile unsigned long cpcibgs; - volatile unsigned long pbacs; - volatile unsigned long iobas; /* +120 */ - volatile unsigned long mbas; - volatile unsigned long lbc; - volatile unsigned long lbstat; - volatile unsigned long lbim; /* +130 */ - volatile unsigned long pcistatim; - volatile unsigned long ica; - volatile unsigned long icd; - volatile unsigned long iiadp; /* +140 */ - volatile unsigned long iscdp; - volatile unsigned long mmas; - volatile unsigned long iomas; - volatile unsigned long ipciaddr; /* +150 */ - volatile unsigned long ipcidata; - volatile unsigned long ipcibe; -}; - -struct tx3927_ccfg_reg { - volatile unsigned long ccfg; - volatile unsigned long crir; - volatile unsigned long pcfg; - volatile unsigned long tear; - volatile unsigned long pdcr; -}; - -/* - * SDRAMC - */ - -/* - * ROMC - */ - -/* - * DMA - */ -/* bits for MCR */ -#define TX3927_DMA_MCR_EIS(ch) (0x10000000<<(ch)) -#define TX3927_DMA_MCR_DIS(ch) (0x01000000<<(ch)) -#define TX3927_DMA_MCR_RSFIF 0x00000080 -#define TX3927_DMA_MCR_FIFUM(ch) (0x00000008<<(ch)) -#define TX3927_DMA_MCR_LE 0x00000004 -#define TX3927_DMA_MCR_RPRT 0x00000002 -#define TX3927_DMA_MCR_MSTEN 0x00000001 - -/* bits for CCRn */ -#define TX3927_DMA_CCR_DBINH 0x04000000 -#define TX3927_DMA_CCR_SBINH 0x02000000 -#define TX3927_DMA_CCR_CHRST 0x01000000 -#define TX3927_DMA_CCR_RVBYTE 0x00800000 -#define TX3927_DMA_CCR_ACKPOL 0x00400000 -#define TX3927_DMA_CCR_REQPL 0x00200000 -#define TX3927_DMA_CCR_EGREQ 0x00100000 -#define TX3927_DMA_CCR_CHDN 0x00080000 -#define TX3927_DMA_CCR_DNCTL 0x00060000 -#define TX3927_DMA_CCR_EXTRQ 0x00010000 -#define TX3927_DMA_CCR_INTRQD 0x0000e000 -#define TX3927_DMA_CCR_INTENE 0x00001000 -#define TX3927_DMA_CCR_INTENC 0x00000800 -#define TX3927_DMA_CCR_INTENT 0x00000400 -#define TX3927_DMA_CCR_CHNEN 0x00000200 -#define TX3927_DMA_CCR_XFACT 0x00000100 -#define TX3927_DMA_CCR_SNOP 0x00000080 -#define TX3927_DMA_CCR_DSTINC 0x00000040 -#define TX3927_DMA_CCR_SRCINC 0x00000020 -#define TX3927_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c) -#define TX3927_DMA_CCR_XFSZ_1W TX3927_DMA_CCR_XFSZ(2) -#define TX3927_DMA_CCR_XFSZ_4W TX3927_DMA_CCR_XFSZ(4) -#define TX3927_DMA_CCR_XFSZ_8W TX3927_DMA_CCR_XFSZ(5) -#define TX3927_DMA_CCR_XFSZ_16W TX3927_DMA_CCR_XFSZ(6) -#define TX3927_DMA_CCR_XFSZ_32W TX3927_DMA_CCR_XFSZ(7) -#define TX3927_DMA_CCR_MEMIO 0x00000002 -#define TX3927_DMA_CCR_ONEAD 0x00000001 - -/* bits for CSRn */ -#define TX3927_DMA_CSR_CHNACT 0x00000100 -#define TX3927_DMA_CSR_ABCHC 0x00000080 -#define TX3927_DMA_CSR_NCHNC 0x00000040 -#define TX3927_DMA_CSR_NTRNFC 0x00000020 -#define TX3927_DMA_CSR_EXTDN 0x00000010 -#define TX3927_DMA_CSR_CFERR 0x00000008 -#define TX3927_DMA_CSR_CHERR 0x00000004 -#define TX3927_DMA_CSR_DESERR 0x00000002 -#define TX3927_DMA_CSR_SORERR 0x00000001 - -/* - * IRC - */ -#define TX3927_IR_INT0 0 -#define TX3927_IR_INT1 1 -#define TX3927_IR_INT2 2 -#define TX3927_IR_INT3 3 -#define TX3927_IR_INT4 4 -#define TX3927_IR_INT5 5 -#define TX3927_IR_SIO0 6 -#define TX3927_IR_SIO1 7 -#define TX3927_IR_SIO(ch) (6 + (ch)) -#define TX3927_IR_DMA 8 -#define TX3927_IR_PIO 9 -#define TX3927_IR_PCI 10 -#define TX3927_IR_TMR(ch) (13 + (ch)) -#define TX3927_NUM_IR 16 - -/* - * PCIC - */ -/* bits for PCICMD */ -/* see PCI_COMMAND_XXX in linux/pci.h */ - -/* bits for PCISTAT */ -/* see PCI_STATUS_XXX in linux/pci.h */ -#define PCI_STATUS_NEW_CAP 0x0010 - -/* bits for TC */ -#define TX3927_PCIC_TC_OF16E 0x00000020 -#define TX3927_PCIC_TC_IF8E 0x00000010 -#define TX3927_PCIC_TC_OF8E 0x00000008 - -/* bits for IOBA/MBA */ -/* see PCI_BASE_ADDRESS_XXX in linux/pci.h */ - -/* bits for PBAPMC */ -#define TX3927_PCIC_PBAPMC_RPBA 0x00000004 -#define TX3927_PCIC_PBAPMC_PBAEN 0x00000002 -#define TX3927_PCIC_PBAPMC_BMCEN 0x00000001 - -/* bits for LBSTAT/LBIM */ -#define TX3927_PCIC_LBIM_ALL 0x0000003e - -/* bits for PCISTATIM (see also PCI_STATUS_XXX in linux/pci.h */ -#define TX3927_PCIC_PCISTATIM_ALL 0x0000f900 - -/* bits for LBC */ -#define TX3927_PCIC_LBC_IBSE 0x00004000 -#define TX3927_PCIC_LBC_TIBSE 0x00002000 -#define TX3927_PCIC_LBC_TMFBSE 0x00001000 -#define TX3927_PCIC_LBC_HRST 0x00000800 -#define TX3927_PCIC_LBC_SRST 0x00000400 -#define TX3927_PCIC_LBC_EPCAD 0x00000200 -#define TX3927_PCIC_LBC_MSDSE 0x00000100 -#define TX3927_PCIC_LBC_CRR 0x00000080 -#define TX3927_PCIC_LBC_ILMDE 0x00000040 -#define TX3927_PCIC_LBC_ILIDE 0x00000020 - -#define TX3927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) -#define TX3927_PCIC_MAX_DEVNU TX3927_PCIC_IDSEL_AD_TO_SLOT(32) - -/* - * CCFG - */ -/* CCFG : Chip Configuration */ -#define TX3927_CCFG_TLBOFF 0x00020000 -#define TX3927_CCFG_BEOW 0x00010000 -#define TX3927_CCFG_WR 0x00008000 -#define TX3927_CCFG_TOE 0x00004000 -#define TX3927_CCFG_PCIXARB 0x00002000 -#define TX3927_CCFG_PCI3 0x00001000 -#define TX3927_CCFG_PSNP 0x00000800 -#define TX3927_CCFG_PPRI 0x00000400 -#define TX3927_CCFG_PLLM 0x00000030 -#define TX3927_CCFG_ENDIAN 0x00000004 -#define TX3927_CCFG_HALT 0x00000002 -#define TX3927_CCFG_ACEHOLD 0x00000001 - -/* PCFG : Pin Configuration */ -#define TX3927_PCFG_SYSCLKEN 0x08000000 -#define TX3927_PCFG_SDRCLKEN_ALL 0x07c00000 -#define TX3927_PCFG_SDRCLKEN(ch) (0x00400000<<(ch)) -#define TX3927_PCFG_PCICLKEN_ALL 0x003c0000 -#define TX3927_PCFG_PCICLKEN(ch) (0x00040000<<(ch)) -#define TX3927_PCFG_SELALL 0x0003ffff -#define TX3927_PCFG_SELCS 0x00020000 -#define TX3927_PCFG_SELDSF 0x00010000 -#define TX3927_PCFG_SELSIOC_ALL 0x0000c000 -#define TX3927_PCFG_SELSIOC(ch) (0x00004000<<(ch)) -#define TX3927_PCFG_SELSIO_ALL 0x00003000 -#define TX3927_PCFG_SELSIO(ch) (0x00001000<<(ch)) -#define TX3927_PCFG_SELTMR_ALL 0x00000e00 -#define TX3927_PCFG_SELTMR(ch) (0x00000200<<(ch)) -#define TX3927_PCFG_SELDONE 0x00000100 -#define TX3927_PCFG_INTDMA_ALL 0x000000f0 -#define TX3927_PCFG_INTDMA(ch) (0x00000010<<(ch)) -#define TX3927_PCFG_SELDMA_ALL 0x0000000f -#define TX3927_PCFG_SELDMA(ch) (0x00000001<<(ch)) - -#define tx3927_sdramcptr ((struct tx3927_sdramc_reg *)TX3927_SDRAMC_REG) -#define tx3927_romcptr ((struct tx3927_romc_reg *)TX3927_ROMC_REG) -#define tx3927_dmaptr ((struct tx3927_dma_reg *)TX3927_DMA_REG) -#define tx3927_pcicptr ((struct tx3927_pcic_reg *)TX3927_PCIC_REG) -#define tx3927_ccfgptr ((struct tx3927_ccfg_reg *)TX3927_CCFG_REG) -#define tx3927_tmrptr(ch) ((struct txx927_tmr_reg *)TX3927_TMR_REG(ch)) -#define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch)) -#define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG) - -#endif /* __ASM_TX3927_H */ diff --git a/include/asm-mips/jmr3927/txx927.h b/include/asm-mips/jmr3927/txx927.h deleted file mode 100644 index 25dcf2feb095..000000000000 --- a/include/asm-mips/jmr3927/txx927.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Common definitions for TX3927/TX4927 - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000 Toshiba Corporation - */ -#ifndef __ASM_TXX927_H -#define __ASM_TXX927_H - -struct txx927_sio_reg { - volatile unsigned long lcr; - volatile unsigned long dicr; - volatile unsigned long disr; - volatile unsigned long cisr; - volatile unsigned long fcr; - volatile unsigned long flcr; - volatile unsigned long bgr; - volatile unsigned long tfifo; - volatile unsigned long rfifo; -}; - -/* - * SIO - */ -/* SILCR : Line Control */ -#define TXx927_SILCR_SCS_MASK 0x00000060 -#define TXx927_SILCR_SCS_IMCLK 0x00000000 -#define TXx927_SILCR_SCS_IMCLK_BG 0x00000020 -#define TXx927_SILCR_SCS_SCLK 0x00000040 -#define TXx927_SILCR_SCS_SCLK_BG 0x00000060 -#define TXx927_SILCR_UEPS 0x00000010 -#define TXx927_SILCR_UPEN 0x00000008 -#define TXx927_SILCR_USBL_MASK 0x00000004 -#define TXx927_SILCR_USBL_1BIT 0x00000004 -#define TXx927_SILCR_USBL_2BIT 0x00000000 -#define TXx927_SILCR_UMODE_MASK 0x00000003 -#define TXx927_SILCR_UMODE_8BIT 0x00000000 -#define TXx927_SILCR_UMODE_7BIT 0x00000001 - -/* SIDICR : DMA/Int. Control */ -#define TXx927_SIDICR_TDE 0x00008000 -#define TXx927_SIDICR_RDE 0x00004000 -#define TXx927_SIDICR_TIE 0x00002000 -#define TXx927_SIDICR_RIE 0x00001000 -#define TXx927_SIDICR_SPIE 0x00000800 -#define TXx927_SIDICR_CTSAC 0x00000600 -#define TXx927_SIDICR_STIE_MASK 0x0000003f -#define TXx927_SIDICR_STIE_OERS 0x00000020 -#define TXx927_SIDICR_STIE_CTSS 0x00000010 -#define TXx927_SIDICR_STIE_RBRKD 0x00000008 -#define TXx927_SIDICR_STIE_TRDY 0x00000004 -#define TXx927_SIDICR_STIE_TXALS 0x00000002 -#define TXx927_SIDICR_STIE_UBRKD 0x00000001 - -/* SIDISR : DMA/Int. Status */ -#define TXx927_SIDISR_UBRK 0x00008000 -#define TXx927_SIDISR_UVALID 0x00004000 -#define TXx927_SIDISR_UFER 0x00002000 -#define TXx927_SIDISR_UPER 0x00001000 -#define TXx927_SIDISR_UOER 0x00000800 -#define TXx927_SIDISR_ERI 0x00000400 -#define TXx927_SIDISR_TOUT 0x00000200 -#define TXx927_SIDISR_TDIS 0x00000100 -#define TXx927_SIDISR_RDIS 0x00000080 -#define TXx927_SIDISR_STIS 0x00000040 -#define TXx927_SIDISR_RFDN_MASK 0x0000001f - -/* SICISR : Change Int. Status */ -#define TXx927_SICISR_OERS 0x00000020 -#define TXx927_SICISR_CTSS 0x00000010 -#define TXx927_SICISR_RBRKD 0x00000008 -#define TXx927_SICISR_TRDY 0x00000004 -#define TXx927_SICISR_TXALS 0x00000002 -#define TXx927_SICISR_UBRKD 0x00000001 - -/* SIFCR : FIFO Control */ -#define TXx927_SIFCR_SWRST 0x00008000 -#define TXx927_SIFCR_RDIL_MASK 0x00000180 -#define TXx927_SIFCR_RDIL_1 0x00000000 -#define TXx927_SIFCR_RDIL_4 0x00000080 -#define TXx927_SIFCR_RDIL_8 0x00000100 -#define TXx927_SIFCR_RDIL_12 0x00000180 -#define TXx927_SIFCR_RDIL_MAX 0x00000180 -#define TXx927_SIFCR_TDIL_MASK 0x00000018 -#define TXx927_SIFCR_TDIL_MASK 0x00000018 -#define TXx927_SIFCR_TDIL_1 0x00000000 -#define TXx927_SIFCR_TDIL_4 0x00000001 -#define TXx927_SIFCR_TDIL_8 0x00000010 -#define TXx927_SIFCR_TDIL_MAX 0x00000010 -#define TXx927_SIFCR_TFRST 0x00000004 -#define TXx927_SIFCR_RFRST 0x00000002 -#define TXx927_SIFCR_FRSTE 0x00000001 -#define TXx927_SIO_TX_FIFO 8 -#define TXx927_SIO_RX_FIFO 16 - -/* SIFLCR : Flow Control */ -#define TXx927_SIFLCR_RCS 0x00001000 -#define TXx927_SIFLCR_TES 0x00000800 -#define TXx927_SIFLCR_RTSSC 0x00000200 -#define TXx927_SIFLCR_RSDE 0x00000100 -#define TXx927_SIFLCR_TSDE 0x00000080 -#define TXx927_SIFLCR_RTSTL_MASK 0x0000001e -#define TXx927_SIFLCR_RTSTL_MAX 0x0000001e -#define TXx927_SIFLCR_TBRK 0x00000001 - -/* SIBGR : Baudrate Control */ -#define TXx927_SIBGR_BCLK_MASK 0x00000300 -#define TXx927_SIBGR_BCLK_T0 0x00000000 -#define TXx927_SIBGR_BCLK_T2 0x00000100 -#define TXx927_SIBGR_BCLK_T4 0x00000200 -#define TXx927_SIBGR_BCLK_T6 0x00000300 -#define TXx927_SIBGR_BRD_MASK 0x000000ff - -/* - * PIO - */ - -#endif /* __ASM_TXX927_H */ diff --git a/include/asm-mips/tx4927/smsc_fdc37m81x.h b/include/asm-mips/tx4927/smsc_fdc37m81x.h deleted file mode 100644 index 5d93bab51254..000000000000 --- a/include/asm-mips/tx4927/smsc_fdc37m81x.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * linux/include/asm-mips/tx4927/smsc_fdc37m81x.h - * - * Interface for smsc fdc48m81x Super IO chip - * - * Author: MontaVista Software, Inc. source@mvista.com - * - * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Copyright (C) 2004 MontaVista Software Inc. - * Manish Lachwani, mlachwani@mvista.com - */ - -#ifndef _SMSC_FDC37M81X_H_ -#define _SMSC_FDC37M81X_H_ - -/* Common Registers */ -#define SMSC_FDC37M81X_CONFIG_INDEX 0x00 -#define SMSC_FDC37M81X_CONFIG_DATA 0x01 -#define SMSC_FDC37M81X_CONF 0x02 -#define SMSC_FDC37M81X_INDEX 0x03 -#define SMSC_FDC37M81X_DNUM 0x07 -#define SMSC_FDC37M81X_DID 0x20 -#define SMSC_FDC37M81X_DREV 0x21 -#define SMSC_FDC37M81X_PCNT 0x22 -#define SMSC_FDC37M81X_PMGT 0x23 -#define SMSC_FDC37M81X_OSC 0x24 -#define SMSC_FDC37M81X_CONFPA0 0x26 -#define SMSC_FDC37M81X_CONFPA1 0x27 -#define SMSC_FDC37M81X_TEST4 0x2B -#define SMSC_FDC37M81X_TEST5 0x2C -#define SMSC_FDC37M81X_TEST1 0x2D -#define SMSC_FDC37M81X_TEST2 0x2E -#define SMSC_FDC37M81X_TEST3 0x2F - -/* Logical device numbers */ -#define SMSC_FDC37M81X_FDD 0x00 -#define SMSC_FDC37M81X_PARALLEL 0x03 -#define SMSC_FDC37M81X_SERIAL1 0x04 -#define SMSC_FDC37M81X_SERIAL2 0x05 -#define SMSC_FDC37M81X_KBD 0x07 -#define SMSC_FDC37M81X_AUXIO 0x08 -#define SMSC_FDC37M81X_NONE 0xff - -/* Logical device Config Registers */ -#define SMSC_FDC37M81X_ACTIVE 0x30 -#define SMSC_FDC37M81X_BASEADDR0 0x60 -#define SMSC_FDC37M81X_BASEADDR1 0x61 -#define SMSC_FDC37M81X_INT 0x70 -#define SMSC_FDC37M81X_INT2 0x72 -#define SMSC_FDC37M81X_LDCR_F0 0xF0 - -/* Chip Config Values */ -#define SMSC_FDC37M81X_CONFIG_ENTER 0x55 -#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa -#define SMSC_FDC37M81X_CHIP_ID 0x4d - -unsigned long __init smsc_fdc37m81x_init(unsigned long port); - -void smsc_fdc37m81x_config_beg(void); - -void smsc_fdc37m81x_config_end(void); - -void smsc_fdc37m81x_config_set(u8 reg, u8 val); - -#endif diff --git a/include/asm-mips/tx4927/toshiba_rbtx4927.h b/include/asm-mips/tx4927/toshiba_rbtx4927.h deleted file mode 100644 index d6b32acd6b7b..000000000000 --- a/include/asm-mips/tx4927/toshiba_rbtx4927.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_TX4927_TOSHIBA_RBTX4927_H -#define __ASM_TX4927_TOSHIBA_RBTX4927_H - -#include - -#ifdef CONFIG_PCI -#define TBTX4927_ISA_IO_OFFSET TX4927_PCIIO -#else -#define TBTX4927_ISA_IO_OFFSET 0 -#endif - -#define RBTX4927_SW_RESET_DO (void __iomem *)0xbc00f000UL -#define RBTX4927_SW_RESET_DO_SET 0x01 - -#define RBTX4927_SW_RESET_ENABLE (void __iomem *)0xbc00f002UL -#define RBTX4927_SW_RESET_ENABLE_SET 0x01 - -#define RBTX4927_RTL_8019_BASE (0x1c020280-TBTX4927_ISA_IO_OFFSET) -#define RBTX4927_RTL_8019_IRQ (TX4927_IRQ_PIC_BEG + 5) - -int toshiba_rbtx4927_irq_nested(int sw_irq); - -#endif /* __ASM_TX4927_TOSHIBA_RBTX4927_H */ diff --git a/include/asm-mips/tx4927/tx4927.h b/include/asm-mips/tx4927/tx4927.h deleted file mode 100644 index 1d4816f3266f..000000000000 --- a/include/asm-mips/tx4927/tx4927.h +++ /dev/null @@ -1,280 +0,0 @@ -/* - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2006 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_TX4927_TX4927_H -#define __ASM_TX4927_TX4927_H - -#include - -#define TX4927_IRQ_CP0_BEG MIPS_CPU_IRQ_BASE -#define TX4927_IRQ_CP0_END (MIPS_CPU_IRQ_BASE + 8 - 1) - -#define TX4927_IRQ_PIC_BEG TXX9_IRQ_BASE -#define TX4927_IRQ_PIC_END (TXX9_IRQ_BASE + TXx9_MAX_IR - 1) - - -#define TX4927_IRQ_USER0 (TX4927_IRQ_CP0_BEG+0) -#define TX4927_IRQ_USER1 (TX4927_IRQ_CP0_BEG+1) -#define TX4927_IRQ_NEST_PIC_ON_CP0 (TX4927_IRQ_CP0_BEG+2) -#define TX4927_IRQ_CPU_TIMER (TX4927_IRQ_CP0_BEG+7) - -#define TX4927_IRQ_NEST_EXT_ON_PIC (TX4927_IRQ_PIC_BEG+3) - -#define TX4927_CCFG_TOE 0x00004000 -#define TX4927_CCFG_WR 0x00008000 -#define TX4927_CCFG_TINTDIS 0x01000000 - -#define TX4927_PCIMEM 0x08000000 -#define TX4927_PCIMEM_SIZE 0x08000000 -#define TX4927_PCIIO 0x16000000 -#define TX4927_PCIIO_SIZE 0x01000000 - -#define TX4927_SDRAMC_REG 0xff1f8000 -#define TX4927_EBUSC_REG 0xff1f9000 -#define TX4927_PCIC_REG 0xff1fd000 -#define TX4927_CCFG_REG 0xff1fe000 -#define TX4927_IRC_REG 0xff1ff600 -#define TX4927_NR_TMR 3 -#define TX4927_TMR_REG(ch) (0xff1ff000 + (ch) * 0x100) - -/* bits for ISTAT3/IMASK3/IMSTAT3 */ -#define TX4927_INT3B_PCID 0 -#define TX4927_INT3B_PCIC 1 -#define TX4927_INT3B_PCIB 2 -#define TX4927_INT3B_PCIA 3 -#define TX4927_INT3F_PCID (1 << TX4927_INT3B_PCID) -#define TX4927_INT3F_PCIC (1 << TX4927_INT3B_PCIC) -#define TX4927_INT3F_PCIB (1 << TX4927_INT3B_PCIB) -#define TX4927_INT3F_PCIA (1 << TX4927_INT3B_PCIA) - -#define TX4927_NR_IRQ_LOCAL TX4927_IRQ_PIC_BEG -#define TX4927_NR_IRQ_IRC 32 /* On-Chip IRC */ - -#define TX4927_IR_PCIC 16 -#define TX4927_IR_PCIERR 22 -#define TX4927_IR_PCIPMA 23 -#define TX4927_IRQ_IRC_PCIC (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIC) -#define TX4927_IRQ_IRC_PCIERR (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIERR) -#define TX4927_IRQ_IOC1 (TX4927_NR_IRQ_LOCAL + TX4927_NR_IRQ_IRC) -#define TX4927_IRQ_IOC_PCID (TX4927_IRQ_IOC1 + TX4927_INT3B_PCID) -#define TX4927_IRQ_IOC_PCIC (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIC) -#define TX4927_IRQ_IOC_PCIB (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIB) -#define TX4927_IRQ_IOC_PCIA (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIA) - -#ifdef _LANGUAGE_ASSEMBLY -#define _CONST64(c) c -#else -#define _CONST64(c) c##ull - -#include - -struct tx4927_sdramc_reg { - volatile unsigned long long cr[4]; - volatile unsigned long long unused0[4]; - volatile unsigned long long tr; - volatile unsigned long long unused1[2]; - volatile unsigned long long cmd; -}; - -struct tx4927_ebusc_reg { - volatile unsigned long long cr[8]; -}; - -struct tx4927_ccfg_reg { - volatile unsigned long long ccfg; - volatile unsigned long long crir; - volatile unsigned long long pcfg; - volatile unsigned long long tear; - volatile unsigned long long clkctr; - volatile unsigned long long unused0; - volatile unsigned long long garbc; - volatile unsigned long long unused1; - volatile unsigned long long unused2; - volatile unsigned long long ramp; -}; - -struct tx4927_pcic_reg { - volatile unsigned long pciid; - volatile unsigned long pcistatus; - volatile unsigned long pciccrev; - volatile unsigned long pcicfg1; - volatile unsigned long p2gm0plbase; /* +10 */ - volatile unsigned long p2gm0pubase; - volatile unsigned long p2gm1plbase; - volatile unsigned long p2gm1pubase; - volatile unsigned long p2gm2pbase; /* +20 */ - volatile unsigned long p2giopbase; - volatile unsigned long unused0; - volatile unsigned long pcisid; - volatile unsigned long unused1; /* +30 */ - volatile unsigned long pcicapptr; - volatile unsigned long unused2; - volatile unsigned long pcicfg2; - volatile unsigned long g2ptocnt; /* +40 */ - volatile unsigned long unused3[15]; - volatile unsigned long g2pstatus; /* +80 */ - volatile unsigned long g2pmask; - volatile unsigned long pcisstatus; - volatile unsigned long pcimask; - volatile unsigned long p2gcfg; /* +90 */ - volatile unsigned long p2gstatus; - volatile unsigned long p2gmask; - volatile unsigned long p2gccmd; - volatile unsigned long unused4[24]; /* +a0 */ - volatile unsigned long pbareqport; /* +100 */ - volatile unsigned long pbacfg; - volatile unsigned long pbastatus; - volatile unsigned long pbamask; - volatile unsigned long pbabm; /* +110 */ - volatile unsigned long pbacreq; - volatile unsigned long pbacgnt; - volatile unsigned long pbacstate; - volatile unsigned long long g2pmgbase[3]; /* +120 */ - volatile unsigned long long g2piogbase; - volatile unsigned long g2pmmask[3]; /* +140 */ - volatile unsigned long g2piomask; - volatile unsigned long long g2pmpbase[3]; /* +150 */ - volatile unsigned long long g2piopbase; - volatile unsigned long pciccfg; /* +170 */ - volatile unsigned long pcicstatus; - volatile unsigned long pcicmask; - volatile unsigned long unused5; - volatile unsigned long long p2gmgbase[3]; /* +180 */ - volatile unsigned long long p2giogbase; - volatile unsigned long g2pcfgadrs; /* +1a0 */ - volatile unsigned long g2pcfgdata; - volatile unsigned long unused6[8]; - volatile unsigned long g2pintack; - volatile unsigned long g2pspc; - volatile unsigned long unused7[12]; /* +1d0 */ - volatile unsigned long long pdmca; /* +200 */ - volatile unsigned long long pdmga; - volatile unsigned long long pdmpa; - volatile unsigned long long pdmcut; - volatile unsigned long long pdmcnt; /* +220 */ - volatile unsigned long long pdmsts; - volatile unsigned long long unused8[2]; - volatile unsigned long long pdmdb[4]; /* +240 */ - volatile unsigned long long pdmtdh; /* +260 */ - volatile unsigned long long pdmdms; -}; - -#endif /* _LANGUAGE_ASSEMBLY */ - -/* - * PCIC - */ - -/* bits for G2PSTATUS/G2PMASK */ -#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003 -#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002 -#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001 - -/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */ -#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900 - -/* bits for PBACFG */ -#define TX4927_PCIC_PBACFG_RPBA 0x00000004 -#define TX4927_PCIC_PBACFG_PBAEN 0x00000002 -#define TX4927_PCIC_PBACFG_BMCEN 0x00000001 - -/* bits for G2PMnGBASE */ -#define TX4927_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for G2PIOGBASE */ -#define TX4927_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for PCICSTATUS/PCICMASK */ -#define TX4927_PCIC_PCICSTATUS_ALL 0x000007dc - -/* bits for PCICCFG */ -#define TX4927_PCIC_PCICCFG_LBWC_MASK 0x0fff0000 -#define TX4927_PCIC_PCICCFG_HRST 0x00000800 -#define TX4927_PCIC_PCICCFG_SRST 0x00000400 -#define TX4927_PCIC_PCICCFG_IRBER 0x00000200 -#define TX4927_PCIC_PCICCFG_IMSE0 0x00000100 -#define TX4927_PCIC_PCICCFG_IMSE1 0x00000080 -#define TX4927_PCIC_PCICCFG_IMSE2 0x00000040 -#define TX4927_PCIC_PCICCFG_IISE 0x00000020 -#define TX4927_PCIC_PCICCFG_ATR 0x00000010 -#define TX4927_PCIC_PCICCFG_ICAE 0x00000008 - -/* bits for P2GMnGBASE */ -#define TX4927_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000) -#define TX4927_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000) - -/* bits for P2GIOGBASE */ -#define TX4927_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000) -#define TX4927_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000) - -#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) -#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32) - -/* - * CCFG - */ -/* CCFG : Chip Configuration */ -#define TX4927_CCFG_PCI66 0x00800000 -#define TX4927_CCFG_PCIMIDE 0x00400000 -#define TX4927_CCFG_PCIXARB 0x00002000 -#define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800 -#define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000 -#define TX4927_CCFG_PCIDIVMODE_3 0x00000800 -#define TX4927_CCFG_PCIDIVMODE_5 0x00001000 -#define TX4927_CCFG_PCIDIVMODE_6 0x00001800 - -#define TX4937_CCFG_PCIDIVMODE_MASK 0x00001c00 -#define TX4937_CCFG_PCIDIVMODE_8 0x00000000 -#define TX4937_CCFG_PCIDIVMODE_4 0x00000400 -#define TX4937_CCFG_PCIDIVMODE_9 0x00000800 -#define TX4937_CCFG_PCIDIVMODE_4_5 0x00000c00 -#define TX4937_CCFG_PCIDIVMODE_10 0x00001000 -#define TX4937_CCFG_PCIDIVMODE_5 0x00001400 -#define TX4937_CCFG_PCIDIVMODE_11 0x00001800 -#define TX4937_CCFG_PCIDIVMODE_5_5 0x00001c00 - -/* PCFG : Pin Configuration */ -#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000 -#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) - -/* CLKCTR : Clock Control */ -#define TX4927_CLKCTR_PCICKD 0x00400000 -#define TX4927_CLKCTR_PCIRST 0x00000040 - -#ifndef _LANGUAGE_ASSEMBLY - -#define tx4927_sdramcptr ((struct tx4927_sdramc_reg *)TX4927_SDRAMC_REG) -#define tx4927_pcicptr ((struct tx4927_pcic_reg *)TX4927_PCIC_REG) -#define tx4927_ccfgptr ((struct tx4927_ccfg_reg *)TX4927_CCFG_REG) -#define tx4927_ebuscptr ((struct tx4927_ebusc_reg *)TX4927_EBUSC_REG) - -#endif /* _LANGUAGE_ASSEMBLY */ - -#endif /* __ASM_TX4927_TX4927_H */ diff --git a/include/asm-mips/tx4938/rbtx4938.h b/include/asm-mips/tx4938/rbtx4938.h deleted file mode 100644 index dfed7beb533f..000000000000 --- a/include/asm-mips/tx4938/rbtx4938.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * linux/include/asm-mips/tx4938/rbtx4938.h - * Definitions for TX4937/TX4938 - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#ifndef __ASM_TX_BOARDS_RBTX4938_H -#define __ASM_TX_BOARDS_RBTX4938_H - -#include -#include -#include - -/* CS */ -#define RBTX4938_CE0 0x1c000000 /* 64M */ -#define RBTX4938_CE2 0x17f00000 /* 1M */ - -/* Address map */ -#define RBTX4938_FPGA_REG_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000000) -#define RBTX4938_FPGA_REV_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000002) -#define RBTX4938_CONFIG1_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000004) -#define RBTX4938_CONFIG2_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000006) -#define RBTX4938_CONFIG3_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000008) -#define RBTX4938_LED_ADDR (KSEG1 + RBTX4938_CE2 + 0x00001000) -#define RBTX4938_DIPSW_ADDR (KSEG1 + RBTX4938_CE2 + 0x00001002) -#define RBTX4938_BDIPSW_ADDR (KSEG1 + RBTX4938_CE2 + 0x00001004) -#define RBTX4938_IMASK_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002000) -#define RBTX4938_IMASK2_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002002) -#define RBTX4938_INTPOL_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002004) -#define RBTX4938_ISTAT_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002006) -#define RBTX4938_ISTAT2_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002008) -#define RBTX4938_IMSTAT_ADDR (KSEG1 + RBTX4938_CE2 + 0x0000200a) -#define RBTX4938_IMSTAT2_ADDR (KSEG1 + RBTX4938_CE2 + 0x0000200c) -#define RBTX4938_SOFTINT_ADDR (KSEG1 + RBTX4938_CE2 + 0x00003000) -#define RBTX4938_PIOSEL_ADDR (KSEG1 + RBTX4938_CE2 + 0x00005000) -#define RBTX4938_SPICS_ADDR (KSEG1 + RBTX4938_CE2 + 0x00005002) -#define RBTX4938_SFPWR_ADDR (KSEG1 + RBTX4938_CE2 + 0x00005008) -#define RBTX4938_SFVOL_ADDR (KSEG1 + RBTX4938_CE2 + 0x0000500a) -#define RBTX4938_SOFTRESET_ADDR (KSEG1 + RBTX4938_CE2 + 0x00007000) -#define RBTX4938_SOFTRESETLOCK_ADDR (KSEG1 + RBTX4938_CE2 + 0x00007002) -#define RBTX4938_PCIRESET_ADDR (KSEG1 + RBTX4938_CE2 + 0x00007004) -#define RBTX4938_ETHER_BASE (KSEG1 + RBTX4938_CE2 + 0x00020000) - -/* Ethernet port address (Jumperless Mode (W12:Open)) */ -#define RBTX4938_ETHER_ADDR (RBTX4938_ETHER_BASE + 0x280) - -/* bits for ISTAT/IMASK/IMSTAT */ -#define RBTX4938_INTB_PCID 0 -#define RBTX4938_INTB_PCIC 1 -#define RBTX4938_INTB_PCIB 2 -#define RBTX4938_INTB_PCIA 3 -#define RBTX4938_INTB_RTC 4 -#define RBTX4938_INTB_ATA 5 -#define RBTX4938_INTB_MODEM 6 -#define RBTX4938_INTB_SWINT 7 -#define RBTX4938_INTF_PCID (1 << RBTX4938_INTB_PCID) -#define RBTX4938_INTF_PCIC (1 << RBTX4938_INTB_PCIC) -#define RBTX4938_INTF_PCIB (1 << RBTX4938_INTB_PCIB) -#define RBTX4938_INTF_PCIA (1 << RBTX4938_INTB_PCIA) -#define RBTX4938_INTF_RTC (1 << RBTX4938_INTB_RTC) -#define RBTX4938_INTF_ATA (1 << RBTX4938_INTB_ATA) -#define RBTX4938_INTF_MODEM (1 << RBTX4938_INTB_MODEM) -#define RBTX4938_INTF_SWINT (1 << RBTX4938_INTB_SWINT) - -#define rbtx4938_fpga_rev_addr ((__u8 __iomem *)RBTX4938_FPGA_REV_ADDR) -#define rbtx4938_led_addr ((__u8 __iomem *)RBTX4938_LED_ADDR) -#define rbtx4938_dipsw_addr ((__u8 __iomem *)RBTX4938_DIPSW_ADDR) -#define rbtx4938_bdipsw_addr ((__u8 __iomem *)RBTX4938_BDIPSW_ADDR) -#define rbtx4938_imask_addr ((__u8 __iomem *)RBTX4938_IMASK_ADDR) -#define rbtx4938_imask2_addr ((__u8 __iomem *)RBTX4938_IMASK2_ADDR) -#define rbtx4938_intpol_addr ((__u8 __iomem *)RBTX4938_INTPOL_ADDR) -#define rbtx4938_istat_addr ((__u8 __iomem *)RBTX4938_ISTAT_ADDR) -#define rbtx4938_istat2_addr ((__u8 __iomem *)RBTX4938_ISTAT2_ADDR) -#define rbtx4938_imstat_addr ((__u8 __iomem *)RBTX4938_IMSTAT_ADDR) -#define rbtx4938_imstat2_addr ((__u8 __iomem *)RBTX4938_IMSTAT2_ADDR) -#define rbtx4938_softint_addr ((__u8 __iomem *)RBTX4938_SOFTINT_ADDR) -#define rbtx4938_piosel_addr ((__u8 __iomem *)RBTX4938_PIOSEL_ADDR) -#define rbtx4938_spics_addr ((__u8 __iomem *)RBTX4938_SPICS_ADDR) -#define rbtx4938_sfpwr_addr ((__u8 __iomem *)RBTX4938_SFPWR_ADDR) -#define rbtx4938_sfvol_addr ((__u8 __iomem *)RBTX4938_SFVOL_ADDR) -#define rbtx4938_softreset_addr ((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR) -#define rbtx4938_softresetlock_addr \ - ((__u8 __iomem *)RBTX4938_SOFTRESETLOCK_ADDR) -#define rbtx4938_pcireset_addr ((__u8 __iomem *)RBTX4938_PCIRESET_ADDR) - -/* - * IRQ mappings - */ - -#define RBTX4938_SOFT_INT0 0 /* not used */ -#define RBTX4938_SOFT_INT1 1 /* not used */ -#define RBTX4938_IRC_INT 2 -#define RBTX4938_TIMER_INT 7 - -/* These are the virtual IRQ numbers, we divide all IRQ's into - * 'spaces', the 'space' determines where and how to enable/disable - * that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new - * IRQ hardware is supported. - */ -#define RBTX4938_NR_IRQ_LOCAL 8 -#define RBTX4938_NR_IRQ_IRC 32 /* On-Chip IRC */ -#define RBTX4938_NR_IRQ_IOC 8 - -#define TX4938_IRQ_CP0_BEG MIPS_CPU_IRQ_BASE -#define TX4938_IRQ_CP0_END (MIPS_CPU_IRQ_BASE + 8 - 1) - -#define TX4938_IRQ_PIC_BEG TXX9_IRQ_BASE -#define TX4938_IRQ_PIC_END (TXX9_IRQ_BASE + TXx9_MAX_IR - 1) -#define TX4938_IRQ_NEST_EXT_ON_PIC (TX4938_IRQ_PIC_BEG+2) -#define TX4938_IRQ_NEST_PIC_ON_CP0 (TX4938_IRQ_CP0_BEG+2) -#define TX4938_IRQ_USER0 (TX4938_IRQ_CP0_BEG+0) -#define TX4938_IRQ_USER1 (TX4938_IRQ_CP0_BEG+1) -#define TX4938_IRQ_CPU_TIMER (TX4938_IRQ_CP0_BEG+7) - -#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG 0 -#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_END 7 - -#define TOSHIBA_RBTX4938_IRQ_IOC_BEG ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG) /* 56 */ -#define TOSHIBA_RBTX4938_IRQ_IOC_END ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_END) /* 63 */ -#define RBTX4938_IRQ_LOCAL TX4938_IRQ_CP0_BEG -#define RBTX4938_IRQ_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_NR_IRQ_LOCAL) -#define RBTX4938_IRQ_IOC (RBTX4938_IRQ_IRC + RBTX4938_NR_IRQ_IRC) -#define RBTX4938_IRQ_END (RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC) - -#define RBTX4938_IRQ_LOCAL_SOFT0 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT0) -#define RBTX4938_IRQ_LOCAL_SOFT1 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT1) -#define RBTX4938_IRQ_LOCAL_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_IRC_INT) -#define RBTX4938_IRQ_LOCAL_TIMER (RBTX4938_IRQ_LOCAL + RBTX4938_TIMER_INT) -#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR) -#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR) -#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n)) -#define RBTX4938_IRQ_IRC_SIO(n) (RBTX4938_IRQ_IRC + TX4938_IR_SIO(n)) -#define RBTX4938_IRQ_IRC_DMA(ch, n) (RBTX4938_IRQ_IRC + TX4938_IR_DMA(ch, n)) -#define RBTX4938_IRQ_IRC_PIO (RBTX4938_IRQ_IRC + TX4938_IR_PIO) -#define RBTX4938_IRQ_IRC_PDMAC (RBTX4938_IRQ_IRC + TX4938_IR_PDMAC) -#define RBTX4938_IRQ_IRC_PCIC (RBTX4938_IRQ_IRC + TX4938_IR_PCIC) -#define RBTX4938_IRQ_IRC_TMR(n) (RBTX4938_IRQ_IRC + TX4938_IR_TMR(n)) -#define RBTX4938_IRQ_IRC_NDFMC (RBTX4938_IRQ_IRC + TX4938_IR_NDFMC) -#define RBTX4938_IRQ_IRC_PCIERR (RBTX4938_IRQ_IRC + TX4938_IR_PCIERR) -#define RBTX4938_IRQ_IRC_PCIPME (RBTX4938_IRQ_IRC + TX4938_IR_PCIPME) -#define RBTX4938_IRQ_IRC_ACLC (RBTX4938_IRQ_IRC + TX4938_IR_ACLC) -#define RBTX4938_IRQ_IRC_ACLCPME (RBTX4938_IRQ_IRC + TX4938_IR_ACLCPME) -#define RBTX4938_IRQ_IRC_PCIC1 (RBTX4938_IRQ_IRC + TX4938_IR_PCIC1) -#define RBTX4938_IRQ_IRC_SPI (RBTX4938_IRQ_IRC + TX4938_IR_SPI) -#define RBTX4938_IRQ_IOC_PCID (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCID) -#define RBTX4938_IRQ_IOC_PCIC (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIC) -#define RBTX4938_IRQ_IOC_PCIB (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIB) -#define RBTX4938_IRQ_IOC_PCIA (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIA) -#define RBTX4938_IRQ_IOC_RTC (RBTX4938_IRQ_IOC + RBTX4938_INTB_RTC) -#define RBTX4938_IRQ_IOC_ATA (RBTX4938_IRQ_IOC + RBTX4938_INTB_ATA) -#define RBTX4938_IRQ_IOC_MODEM (RBTX4938_IRQ_IOC + RBTX4938_INTB_MODEM) -#define RBTX4938_IRQ_IOC_SWINT (RBTX4938_IRQ_IOC + RBTX4938_INTB_SWINT) - - -/* IOC (PCI, etc) */ -#define RBTX4938_IRQ_IOCINT (TX4938_IRQ_NEST_EXT_ON_PIC) -/* Onboard 10M Ether */ -#define RBTX4938_IRQ_ETHER (TX4938_IRQ_NEST_EXT_ON_PIC + 1) - -#define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base) -#define RBTX4938_RTL_8019_IRQ (RBTX4938_IRQ_ETHER) - -#endif /* __ASM_TX_BOARDS_RBTX4938_H */ diff --git a/include/asm-mips/tx4938/spi.h b/include/asm-mips/tx4938/spi.h deleted file mode 100644 index 6a60c83e152b..000000000000 --- a/include/asm-mips/tx4938/spi.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * linux/include/asm-mips/tx4938/spi.h - * Definitions for TX4937/TX4938 SPI - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#ifndef __ASM_TX_BOARDS_TX4938_SPI_H -#define __ASM_TX_BOARDS_TX4938_SPI_H - -extern int spi_eeprom_register(int chipid); -extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len); - -#endif /* __ASM_TX_BOARDS_TX4938_SPI_H */ diff --git a/include/asm-mips/tx4938/tx4938.h b/include/asm-mips/tx4938/tx4938.h deleted file mode 100644 index e8807f5c61e9..000000000000 --- a/include/asm-mips/tx4938/tx4938.h +++ /dev/null @@ -1,628 +0,0 @@ -/* - * linux/include/asm-mips/tx4938/tx4938.h - * Definitions for TX4937/TX4938 - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#ifndef __ASM_TX_BOARDS_TX4938_H -#define __ASM_TX_BOARDS_TX4938_H - -#define tx4938_read_nfmc(addr) (*(volatile unsigned int *)(addr)) -#define tx4938_write_nfmc(b, addr) (*(volatile unsigned int *)(addr)) = (b) - -#define TX4938_NR_IRQ_LOCAL TX4938_IRQ_PIC_BEG - -#define TX4938_IRQ_IRC_PCIC (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIC) -#define TX4938_IRQ_IRC_PCIERR (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIERR) - -#define TX4938_PCIIO_0 0x10000000 -#define TX4938_PCIIO_1 0x01010000 -#define TX4938_PCIMEM_0 0x08000000 -#define TX4938_PCIMEM_1 0x11000000 - -#define TX4938_PCIIO_SIZE_0 0x01000000 -#define TX4938_PCIIO_SIZE_1 0x00010000 -#define TX4938_PCIMEM_SIZE_0 0x08000000 -#define TX4938_PCIMEM_SIZE_1 0x00010000 - -#define TX4938_REG_BASE 0xff1f0000 /* == TX4937_REG_BASE */ -#define TX4938_REG_SIZE 0x00010000 /* == TX4937_REG_SIZE */ - -/* NDFMC, SRAMC, PCIC1, SPIC: TX4938 only */ -#define TX4938_NDFMC_REG (TX4938_REG_BASE + 0x5000) -#define TX4938_SRAMC_REG (TX4938_REG_BASE + 0x6000) -#define TX4938_PCIC1_REG (TX4938_REG_BASE + 0x7000) -#define TX4938_SDRAMC_REG (TX4938_REG_BASE + 0x8000) -#define TX4938_EBUSC_REG (TX4938_REG_BASE + 0x9000) -#define TX4938_DMA_REG(ch) (TX4938_REG_BASE + 0xb000 + (ch) * 0x800) -#define TX4938_PCIC_REG (TX4938_REG_BASE + 0xd000) -#define TX4938_CCFG_REG (TX4938_REG_BASE + 0xe000) -#define TX4938_NR_TMR 3 -#define TX4938_TMR_REG(ch) ((TX4938_REG_BASE + 0xf000) + (ch) * 0x100) -#define TX4938_NR_SIO 2 -#define TX4938_SIO_REG(ch) ((TX4938_REG_BASE + 0xf300) + (ch) * 0x100) -#define TX4938_PIO_REG (TX4938_REG_BASE + 0xf500) -#define TX4938_IRC_REG (TX4938_REG_BASE + 0xf600) -#define TX4938_ACLC_REG (TX4938_REG_BASE + 0xf700) -#define TX4938_SPI_REG (TX4938_REG_BASE + 0xf800) - -#ifdef __ASSEMBLY__ -#define _CONST64(c) c -#else -#define _CONST64(c) c##ull - -#include - -#ifdef __BIG_ENDIAN -#define endian_def_l2(e1, e2) \ - volatile unsigned long e1, e2 -#define endian_def_s2(e1, e2) \ - volatile unsigned short e1, e2 -#define endian_def_sb2(e1, e2, e3) \ - volatile unsigned short e1;volatile unsigned char e2, e3 -#define endian_def_b2s(e1, e2, e3) \ - volatile unsigned char e1, e2;volatile unsigned short e3 -#define endian_def_b4(e1, e2, e3, e4) \ - volatile unsigned char e1, e2, e3, e4 -#else -#define endian_def_l2(e1, e2) \ - volatile unsigned long e2, e1 -#define endian_def_s2(e1, e2) \ - volatile unsigned short e2, e1 -#define endian_def_sb2(e1, e2, e3) \ - volatile unsigned char e3, e2;volatile unsigned short e1 -#define endian_def_b2s(e1, e2, e3) \ - volatile unsigned short e3;volatile unsigned char e2, e1 -#define endian_def_b4(e1, e2, e3, e4) \ - volatile unsigned char e4, e3, e2, e1 -#endif - - -struct tx4938_sdramc_reg { - volatile unsigned long long cr[4]; - volatile unsigned long long unused0[4]; - volatile unsigned long long tr; - volatile unsigned long long unused1[2]; - volatile unsigned long long cmd; - volatile unsigned long long sfcmd; -}; - -struct tx4938_ebusc_reg { - volatile unsigned long long cr[8]; -}; - -struct tx4938_dma_reg { - struct tx4938_dma_ch_reg { - volatile unsigned long long cha; - volatile unsigned long long sar; - volatile unsigned long long dar; - endian_def_l2(unused0, cntr); - endian_def_l2(unused1, sair); - endian_def_l2(unused2, dair); - endian_def_l2(unused3, ccr); - endian_def_l2(unused4, csr); - } ch[4]; - volatile unsigned long long dbr[8]; - volatile unsigned long long tdhr; - volatile unsigned long long midr; - endian_def_l2(unused0, mcr); -}; - -struct tx4938_pcic_reg { - volatile unsigned long pciid; - volatile unsigned long pcistatus; - volatile unsigned long pciccrev; - volatile unsigned long pcicfg1; - volatile unsigned long p2gm0plbase; /* +10 */ - volatile unsigned long p2gm0pubase; - volatile unsigned long p2gm1plbase; - volatile unsigned long p2gm1pubase; - volatile unsigned long p2gm2pbase; /* +20 */ - volatile unsigned long p2giopbase; - volatile unsigned long unused0; - volatile unsigned long pcisid; - volatile unsigned long unused1; /* +30 */ - volatile unsigned long pcicapptr; - volatile unsigned long unused2; - volatile unsigned long pcicfg2; - volatile unsigned long g2ptocnt; /* +40 */ - volatile unsigned long unused3[15]; - volatile unsigned long g2pstatus; /* +80 */ - volatile unsigned long g2pmask; - volatile unsigned long pcisstatus; - volatile unsigned long pcimask; - volatile unsigned long p2gcfg; /* +90 */ - volatile unsigned long p2gstatus; - volatile unsigned long p2gmask; - volatile unsigned long p2gccmd; - volatile unsigned long unused4[24]; /* +a0 */ - volatile unsigned long pbareqport; /* +100 */ - volatile unsigned long pbacfg; - volatile unsigned long pbastatus; - volatile unsigned long pbamask; - volatile unsigned long pbabm; /* +110 */ - volatile unsigned long pbacreq; - volatile unsigned long pbacgnt; - volatile unsigned long pbacstate; - volatile unsigned long long g2pmgbase[3]; /* +120 */ - volatile unsigned long long g2piogbase; - volatile unsigned long g2pmmask[3]; /* +140 */ - volatile unsigned long g2piomask; - volatile unsigned long long g2pmpbase[3]; /* +150 */ - volatile unsigned long long g2piopbase; - volatile unsigned long pciccfg; /* +170 */ - volatile unsigned long pcicstatus; - volatile unsigned long pcicmask; - volatile unsigned long unused5; - volatile unsigned long long p2gmgbase[3]; /* +180 */ - volatile unsigned long long p2giogbase; - volatile unsigned long g2pcfgadrs; /* +1a0 */ - volatile unsigned long g2pcfgdata; - volatile unsigned long unused6[8]; - volatile unsigned long g2pintack; - volatile unsigned long g2pspc; - volatile unsigned long unused7[12]; /* +1d0 */ - volatile unsigned long long pdmca; /* +200 */ - volatile unsigned long long pdmga; - volatile unsigned long long pdmpa; - volatile unsigned long long pdmctr; - volatile unsigned long long pdmcfg; /* +220 */ - volatile unsigned long long pdmsts; -}; - -struct tx4938_aclc_reg { - volatile unsigned long acctlen; - volatile unsigned long acctldis; - volatile unsigned long acregacc; - volatile unsigned long unused0; - volatile unsigned long acintsts; - volatile unsigned long acintmsts; - volatile unsigned long acinten; - volatile unsigned long acintdis; - volatile unsigned long acsemaph; - volatile unsigned long unused1[7]; - volatile unsigned long acgpidat; - volatile unsigned long acgpodat; - volatile unsigned long acslten; - volatile unsigned long acsltdis; - volatile unsigned long acfifosts; - volatile unsigned long unused2[11]; - volatile unsigned long acdmasts; - volatile unsigned long acdmasel; - volatile unsigned long unused3[6]; - volatile unsigned long acaudodat; - volatile unsigned long acsurrdat; - volatile unsigned long accentdat; - volatile unsigned long aclfedat; - volatile unsigned long acaudiat; - volatile unsigned long unused4; - volatile unsigned long acmodoat; - volatile unsigned long acmodidat; - volatile unsigned long unused5[15]; - volatile unsigned long acrevid; -}; - - -struct tx4938_tmr_reg { - volatile unsigned long tcr; - volatile unsigned long tisr; - volatile unsigned long cpra; - volatile unsigned long cprb; - volatile unsigned long itmr; - volatile unsigned long unused0[3]; - volatile unsigned long ccdr; - volatile unsigned long unused1[3]; - volatile unsigned long pgmr; - volatile unsigned long unused2[3]; - volatile unsigned long wtmr; - volatile unsigned long unused3[43]; - volatile unsigned long trr; -}; - -struct tx4938_sio_reg { - volatile unsigned long lcr; - volatile unsigned long dicr; - volatile unsigned long disr; - volatile unsigned long cisr; - volatile unsigned long fcr; - volatile unsigned long flcr; - volatile unsigned long bgr; - volatile unsigned long tfifo; - volatile unsigned long rfifo; -}; - -struct tx4938_ndfmc_reg { - endian_def_l2(unused0, dtr); - endian_def_l2(unused1, mcr); - endian_def_l2(unused2, sr); - endian_def_l2(unused3, isr); - endian_def_l2(unused4, imr); - endian_def_l2(unused5, spr); - endian_def_l2(unused6, rstr); -}; - -struct tx4938_spi_reg { - volatile unsigned long mcr; - volatile unsigned long cr0; - volatile unsigned long cr1; - volatile unsigned long fs; - volatile unsigned long unused1; - volatile unsigned long sr; - volatile unsigned long dr; - volatile unsigned long unused2; -}; - -struct tx4938_sramc_reg { - volatile unsigned long long cr; -}; - -struct tx4938_ccfg_reg { - volatile unsigned long long ccfg; - volatile unsigned long long crir; - volatile unsigned long long pcfg; - volatile unsigned long long tear; - volatile unsigned long long clkctr; - volatile unsigned long long unused0; - volatile unsigned long long garbc; - volatile unsigned long long unused1; - volatile unsigned long long unused2; - volatile unsigned long long ramp; - volatile unsigned long long unused3; - volatile unsigned long long jmpadr; -}; - -#undef endian_def_l2 -#undef endian_def_s2 -#undef endian_def_sb2 -#undef endian_def_b2s -#undef endian_def_b4 - -#endif /* __ASSEMBLY__ */ - -/* - * NDFMC - */ - -/* NDFMCR : NDFMC Mode Control */ -#define TX4938_NDFMCR_WE 0x80 -#define TX4938_NDFMCR_ECC_ALL 0x60 -#define TX4938_NDFMCR_ECC_RESET 0x60 -#define TX4938_NDFMCR_ECC_READ 0x40 -#define TX4938_NDFMCR_ECC_ON 0x20 -#define TX4938_NDFMCR_ECC_OFF 0x00 -#define TX4938_NDFMCR_CE 0x10 -#define TX4938_NDFMCR_BSPRT 0x04 -#define TX4938_NDFMCR_ALE 0x02 -#define TX4938_NDFMCR_CLE 0x01 - -/* NDFMCR : NDFMC Status */ -#define TX4938_NDFSR_BUSY 0x80 - -/* NDFMCR : NDFMC Reset */ -#define TX4938_NDFRSTR_RST 0x01 - -/* - * IRC - */ - -#define TX4938_IR_ECCERR 0 -#define TX4938_IR_WTOERR 1 -#define TX4938_NUM_IR_INT 6 -#define TX4938_IR_INT(n) (2 + (n)) -#define TX4938_NUM_IR_SIO 2 -#define TX4938_IR_SIO(n) (8 + (n)) -#define TX4938_NUM_IR_DMA 4 -#define TX4938_IR_DMA(ch, n) ((ch ? 27 : 10) + (n)) /* 10-13, 27-30 */ -#define TX4938_IR_PIO 14 -#define TX4938_IR_PDMAC 15 -#define TX4938_IR_PCIC 16 -#define TX4938_NUM_IR_TMR 3 -#define TX4938_IR_TMR(n) (17 + (n)) -#define TX4938_IR_NDFMC 21 -#define TX4938_IR_PCIERR 22 -#define TX4938_IR_PCIPME 23 -#define TX4938_IR_ACLC 24 -#define TX4938_IR_ACLCPME 25 -#define TX4938_IR_PCIC1 26 -#define TX4938_IR_SPI 31 -#define TX4938_NUM_IR 32 -/* multiplex */ -#define TX4938_IR_ETH0 TX4938_IR_INT(4) -#define TX4938_IR_ETH1 TX4938_IR_INT(3) - -/* - * CCFG - */ -/* CCFG : Chip Configuration */ -#define TX4938_CCFG_WDRST _CONST64(0x0000020000000000) -#define TX4938_CCFG_WDREXEN _CONST64(0x0000010000000000) -#define TX4938_CCFG_BCFG_MASK _CONST64(0x000000ff00000000) -#define TX4938_CCFG_TINTDIS 0x01000000 -#define TX4938_CCFG_PCI66 0x00800000 -#define TX4938_CCFG_PCIMODE 0x00400000 -#define TX4938_CCFG_PCI1_66 0x00200000 -#define TX4938_CCFG_DIVMODE_MASK 0x001e0000 -#define TX4938_CCFG_DIVMODE_2 (0x4 << 17) -#define TX4938_CCFG_DIVMODE_2_5 (0xf << 17) -#define TX4938_CCFG_DIVMODE_3 (0x5 << 17) -#define TX4938_CCFG_DIVMODE_4 (0x6 << 17) -#define TX4938_CCFG_DIVMODE_4_5 (0xd << 17) -#define TX4938_CCFG_DIVMODE_8 (0x0 << 17) -#define TX4938_CCFG_DIVMODE_10 (0xb << 17) -#define TX4938_CCFG_DIVMODE_12 (0x1 << 17) -#define TX4938_CCFG_DIVMODE_16 (0x2 << 17) -#define TX4938_CCFG_DIVMODE_18 (0x9 << 17) -#define TX4938_CCFG_BEOW 0x00010000 -#define TX4938_CCFG_WR 0x00008000 -#define TX4938_CCFG_TOE 0x00004000 -#define TX4938_CCFG_PCIXARB 0x00002000 -#define TX4938_CCFG_PCIDIVMODE_MASK 0x00001c00 -#define TX4938_CCFG_PCIDIVMODE_4 (0x1 << 10) -#define TX4938_CCFG_PCIDIVMODE_4_5 (0x3 << 10) -#define TX4938_CCFG_PCIDIVMODE_5 (0x5 << 10) -#define TX4938_CCFG_PCIDIVMODE_5_5 (0x7 << 10) -#define TX4938_CCFG_PCIDIVMODE_8 (0x0 << 10) -#define TX4938_CCFG_PCIDIVMODE_9 (0x2 << 10) -#define TX4938_CCFG_PCIDIVMODE_10 (0x4 << 10) -#define TX4938_CCFG_PCIDIVMODE_11 (0x6 << 10) -#define TX4938_CCFG_PCI1DMD 0x00000100 -#define TX4938_CCFG_SYSSP_MASK 0x000000c0 -#define TX4938_CCFG_ENDIAN 0x00000004 -#define TX4938_CCFG_HALT 0x00000002 -#define TX4938_CCFG_ACEHOLD 0x00000001 - -/* PCFG : Pin Configuration */ -#define TX4938_PCFG_ETH0_SEL _CONST64(0x8000000000000000) -#define TX4938_PCFG_ETH1_SEL _CONST64(0x4000000000000000) -#define TX4938_PCFG_ATA_SEL _CONST64(0x2000000000000000) -#define TX4938_PCFG_ISA_SEL _CONST64(0x1000000000000000) -#define TX4938_PCFG_SPI_SEL _CONST64(0x0800000000000000) -#define TX4938_PCFG_NDF_SEL _CONST64(0x0400000000000000) -#define TX4938_PCFG_SDCLKDLY_MASK 0x30000000 -#define TX4938_PCFG_SDCLKDLY(d) ((d)<<28) -#define TX4938_PCFG_SYSCLKEN 0x08000000 -#define TX4938_PCFG_SDCLKEN_ALL 0x07800000 -#define TX4938_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) -#define TX4938_PCFG_PCICLKEN_ALL 0x003f0000 -#define TX4938_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) -#define TX4938_PCFG_SEL2 0x00000200 -#define TX4938_PCFG_SEL1 0x00000100 -#define TX4938_PCFG_DMASEL_ALL 0x0000000f -#define TX4938_PCFG_DMASEL0_DRQ0 0x00000000 -#define TX4938_PCFG_DMASEL0_SIO1 0x00000001 -#define TX4938_PCFG_DMASEL1_DRQ1 0x00000000 -#define TX4938_PCFG_DMASEL1_SIO1 0x00000002 -#define TX4938_PCFG_DMASEL2_DRQ2 0x00000000 -#define TX4938_PCFG_DMASEL2_SIO0 0x00000004 -#define TX4938_PCFG_DMASEL3_DRQ3 0x00000000 -#define TX4938_PCFG_DMASEL3_SIO0 0x00000008 - -/* CLKCTR : Clock Control */ -#define TX4938_CLKCTR_NDFCKD _CONST64(0x0001000000000000) -#define TX4938_CLKCTR_NDFRST _CONST64(0x0000000100000000) -#define TX4938_CLKCTR_ETH1CKD 0x80000000 -#define TX4938_CLKCTR_ETH0CKD 0x40000000 -#define TX4938_CLKCTR_SPICKD 0x20000000 -#define TX4938_CLKCTR_SRAMCKD 0x10000000 -#define TX4938_CLKCTR_PCIC1CKD 0x08000000 -#define TX4938_CLKCTR_DMA1CKD 0x04000000 -#define TX4938_CLKCTR_ACLCKD 0x02000000 -#define TX4938_CLKCTR_PIOCKD 0x01000000 -#define TX4938_CLKCTR_DMACKD 0x00800000 -#define TX4938_CLKCTR_PCICKD 0x00400000 -#define TX4938_CLKCTR_TM0CKD 0x00100000 -#define TX4938_CLKCTR_TM1CKD 0x00080000 -#define TX4938_CLKCTR_TM2CKD 0x00040000 -#define TX4938_CLKCTR_SIO0CKD 0x00020000 -#define TX4938_CLKCTR_SIO1CKD 0x00010000 -#define TX4938_CLKCTR_ETH1RST 0x00008000 -#define TX4938_CLKCTR_ETH0RST 0x00004000 -#define TX4938_CLKCTR_SPIRST 0x00002000 -#define TX4938_CLKCTR_SRAMRST 0x00001000 -#define TX4938_CLKCTR_PCIC1RST 0x00000800 -#define TX4938_CLKCTR_DMA1RST 0x00000400 -#define TX4938_CLKCTR_ACLRST 0x00000200 -#define TX4938_CLKCTR_PIORST 0x00000100 -#define TX4938_CLKCTR_DMARST 0x00000080 -#define TX4938_CLKCTR_PCIRST 0x00000040 -#define TX4938_CLKCTR_TM0RST 0x00000010 -#define TX4938_CLKCTR_TM1RST 0x00000008 -#define TX4938_CLKCTR_TM2RST 0x00000004 -#define TX4938_CLKCTR_SIO0RST 0x00000002 -#define TX4938_CLKCTR_SIO1RST 0x00000001 - -/* bits for G2PSTATUS/G2PMASK */ -#define TX4938_PCIC_G2PSTATUS_ALL 0x00000003 -#define TX4938_PCIC_G2PSTATUS_TTOE 0x00000002 -#define TX4938_PCIC_G2PSTATUS_RTOE 0x00000001 - -/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */ -#define TX4938_PCIC_PCISTATUS_ALL 0x0000f900 - -/* bits for PBACFG */ -#define TX4938_PCIC_PBACFG_FIXPA 0x00000008 -#define TX4938_PCIC_PBACFG_RPBA 0x00000004 -#define TX4938_PCIC_PBACFG_PBAEN 0x00000002 -#define TX4938_PCIC_PBACFG_BMCEN 0x00000001 - -/* bits for G2PMnGBASE */ -#define TX4938_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4938_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for G2PIOGBASE */ -#define TX4938_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4938_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for PCICSTATUS/PCICMASK */ -#define TX4938_PCIC_PCICSTATUS_ALL 0x000007b8 -#define TX4938_PCIC_PCICSTATUS_PME 0x00000400 -#define TX4938_PCIC_PCICSTATUS_TLB 0x00000200 -#define TX4938_PCIC_PCICSTATUS_NIB 0x00000100 -#define TX4938_PCIC_PCICSTATUS_ZIB 0x00000080 -#define TX4938_PCIC_PCICSTATUS_PERR 0x00000020 -#define TX4938_PCIC_PCICSTATUS_SERR 0x00000010 -#define TX4938_PCIC_PCICSTATUS_GBE 0x00000008 -#define TX4938_PCIC_PCICSTATUS_IWB 0x00000002 -#define TX4938_PCIC_PCICSTATUS_E2PDONE 0x00000001 - -/* bits for PCICCFG */ -#define TX4938_PCIC_PCICCFG_GBWC_MASK 0x0fff0000 -#define TX4938_PCIC_PCICCFG_HRST 0x00000800 -#define TX4938_PCIC_PCICCFG_SRST 0x00000400 -#define TX4938_PCIC_PCICCFG_IRBER 0x00000200 -#define TX4938_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch)) -#define TX4938_PCIC_PCICCFG_G2PM0EN 0x00000100 -#define TX4938_PCIC_PCICCFG_G2PM1EN 0x00000080 -#define TX4938_PCIC_PCICCFG_G2PM2EN 0x00000040 -#define TX4938_PCIC_PCICCFG_G2PIOEN 0x00000020 -#define TX4938_PCIC_PCICCFG_TCAR 0x00000010 -#define TX4938_PCIC_PCICCFG_ICAEN 0x00000008 - -/* bits for P2GMnGBASE */ -#define TX4938_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000) -#define TX4938_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4938_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000) - -/* bits for P2GIOGBASE */ -#define TX4938_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000) -#define TX4938_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4938_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000) - -#define TX4938_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) -#define TX4938_PCIC_MAX_DEVNU TX4938_PCIC_IDSEL_AD_TO_SLOT(32) - -/* bits for PDMCFG */ -#define TX4938_PCIC_PDMCFG_RSTFIFO 0x00200000 -#define TX4938_PCIC_PDMCFG_EXFER 0x00100000 -#define TX4938_PCIC_PDMCFG_REQDLY_MASK 0x00003800 -#define TX4938_PCIC_PDMCFG_REQDLY_NONE (0 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_16 (1 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_32 (2 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_64 (3 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_128 (4 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_256 (5 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_512 (6 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_1024 (7 << 11) -#define TX4938_PCIC_PDMCFG_ERRIE 0x00000400 -#define TX4938_PCIC_PDMCFG_NCCMPIE 0x00000200 -#define TX4938_PCIC_PDMCFG_NTCMPIE 0x00000100 -#define TX4938_PCIC_PDMCFG_CHNEN 0x00000080 -#define TX4938_PCIC_PDMCFG_XFRACT 0x00000040 -#define TX4938_PCIC_PDMCFG_BSWAP 0x00000020 -#define TX4938_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c -#define TX4938_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000 -#define TX4938_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004 -#define TX4938_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008 -#define TX4938_PCIC_PDMCFG_XFRDIRC 0x00000002 -#define TX4938_PCIC_PDMCFG_CHRST 0x00000001 - -/* bits for PDMSTS */ -#define TX4938_PCIC_PDMSTS_REQCNT_MASK 0x3f000000 -#define TX4938_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000 -#define TX4938_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000 -#define TX4938_PCIC_PDMSTS_FIFORP_MASK 0x00030000 -#define TX4938_PCIC_PDMSTS_ERRINT 0x00000800 -#define TX4938_PCIC_PDMSTS_DONEINT 0x00000400 -#define TX4938_PCIC_PDMSTS_CHNEN 0x00000200 -#define TX4938_PCIC_PDMSTS_XFRACT 0x00000100 -#define TX4938_PCIC_PDMSTS_ACCMP 0x00000080 -#define TX4938_PCIC_PDMSTS_NCCMP 0x00000040 -#define TX4938_PCIC_PDMSTS_NTCMP 0x00000020 -#define TX4938_PCIC_PDMSTS_CFGERR 0x00000008 -#define TX4938_PCIC_PDMSTS_PCIERR 0x00000004 -#define TX4938_PCIC_PDMSTS_CHNERR 0x00000002 -#define TX4938_PCIC_PDMSTS_DATAERR 0x00000001 -#define TX4938_PCIC_PDMSTS_ALL_CMP 0x000000e0 -#define TX4938_PCIC_PDMSTS_ALL_ERR 0x0000000f - -/* - * DMA - */ -/* bits for MCR */ -#define TX4938_DMA_MCR_EIS(ch) (0x10000000<<(ch)) -#define TX4938_DMA_MCR_DIS(ch) (0x01000000<<(ch)) -#define TX4938_DMA_MCR_RSFIF 0x00000080 -#define TX4938_DMA_MCR_FIFUM(ch) (0x00000008<<(ch)) -#define TX4938_DMA_MCR_RPRT 0x00000002 -#define TX4938_DMA_MCR_MSTEN 0x00000001 - -/* bits for CCRn */ -#define TX4938_DMA_CCR_IMMCHN 0x20000000 -#define TX4938_DMA_CCR_USEXFSZ 0x10000000 -#define TX4938_DMA_CCR_LE 0x08000000 -#define TX4938_DMA_CCR_DBINH 0x04000000 -#define TX4938_DMA_CCR_SBINH 0x02000000 -#define TX4938_DMA_CCR_CHRST 0x01000000 -#define TX4938_DMA_CCR_RVBYTE 0x00800000 -#define TX4938_DMA_CCR_ACKPOL 0x00400000 -#define TX4938_DMA_CCR_REQPL 0x00200000 -#define TX4938_DMA_CCR_EGREQ 0x00100000 -#define TX4938_DMA_CCR_CHDN 0x00080000 -#define TX4938_DMA_CCR_DNCTL 0x00060000 -#define TX4938_DMA_CCR_EXTRQ 0x00010000 -#define TX4938_DMA_CCR_INTRQD 0x0000e000 -#define TX4938_DMA_CCR_INTENE 0x00001000 -#define TX4938_DMA_CCR_INTENC 0x00000800 -#define TX4938_DMA_CCR_INTENT 0x00000400 -#define TX4938_DMA_CCR_CHNEN 0x00000200 -#define TX4938_DMA_CCR_XFACT 0x00000100 -#define TX4938_DMA_CCR_SMPCHN 0x00000020 -#define TX4938_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c) -#define TX4938_DMA_CCR_XFSZ_1W TX4938_DMA_CCR_XFSZ(2) -#define TX4938_DMA_CCR_XFSZ_2W TX4938_DMA_CCR_XFSZ(3) -#define TX4938_DMA_CCR_XFSZ_4W TX4938_DMA_CCR_XFSZ(4) -#define TX4938_DMA_CCR_XFSZ_8W TX4938_DMA_CCR_XFSZ(5) -#define TX4938_DMA_CCR_XFSZ_16W TX4938_DMA_CCR_XFSZ(6) -#define TX4938_DMA_CCR_XFSZ_32W TX4938_DMA_CCR_XFSZ(7) -#define TX4938_DMA_CCR_MEMIO 0x00000002 -#define TX4938_DMA_CCR_SNGAD 0x00000001 - -/* bits for CSRn */ -#define TX4938_DMA_CSR_CHNEN 0x00000400 -#define TX4938_DMA_CSR_STLXFER 0x00000200 -#define TX4938_DMA_CSR_CHNACT 0x00000100 -#define TX4938_DMA_CSR_ABCHC 0x00000080 -#define TX4938_DMA_CSR_NCHNC 0x00000040 -#define TX4938_DMA_CSR_NTRNFC 0x00000020 -#define TX4938_DMA_CSR_EXTDN 0x00000010 -#define TX4938_DMA_CSR_CFERR 0x00000008 -#define TX4938_DMA_CSR_CHERR 0x00000004 -#define TX4938_DMA_CSR_DESERR 0x00000002 -#define TX4938_DMA_CSR_SORERR 0x00000001 - -#ifndef __ASSEMBLY__ - -#define tx4938_sdramcptr ((struct tx4938_sdramc_reg *)TX4938_SDRAMC_REG) -#define tx4938_ebuscptr ((struct tx4938_ebusc_reg *)TX4938_EBUSC_REG) -#define tx4938_dmaptr(ch) ((struct tx4938_dma_reg *)TX4938_DMA_REG(ch)) -#define tx4938_ndfmcptr ((struct tx4938_ndfmc_reg *)TX4938_NDFMC_REG) -#define tx4938_pcicptr ((struct tx4938_pcic_reg *)TX4938_PCIC_REG) -#define tx4938_pcic1ptr ((struct tx4938_pcic_reg *)TX4938_PCIC1_REG) -#define tx4938_ccfgptr ((struct tx4938_ccfg_reg *)TX4938_CCFG_REG) -#define tx4938_sioptr(ch) ((struct tx4938_sio_reg *)TX4938_SIO_REG(ch)) -#define tx4938_pioptr ((struct txx9_pio_reg __iomem *)TX4938_PIO_REG) -#define tx4938_aclcptr ((struct tx4938_aclc_reg *)TX4938_ACLC_REG) -#define tx4938_spiptr ((struct tx4938_spi_reg *)TX4938_SPI_REG) -#define tx4938_sramcptr ((struct tx4938_sramc_reg *)TX4938_SRAMC_REG) - - -#define TX4938_REV_MAJ_MIN() ((unsigned long)tx4938_ccfgptr->crir & 0x00ff) -#define TX4938_REV_PCODE() ((unsigned long)tx4938_ccfgptr->crir >> 16) - -#define TX4938_SDRAMC_BA(ch) ((tx4938_sdramcptr->cr[ch] >> 49) << 21) -#define TX4938_SDRAMC_SIZE(ch) (((tx4938_sdramcptr->cr[ch] >> 33) + 1) << 21) - -#define TX4938_EBUSC_BA(ch) ((tx4938_ebuscptr->cr[ch] >> 48) << 20) -#define TX4938_EBUSC_SIZE(ch) \ - (0x00100000 << ((unsigned long)(tx4938_ebuscptr->cr[ch] >> 8) & 0xf)) - - -#endif /* !__ASSEMBLY__ */ - -#endif diff --git a/include/asm-mips/txx9/jmr3927.h b/include/asm-mips/txx9/jmr3927.h new file mode 100644 index 000000000000..29e54981a86e --- /dev/null +++ b/include/asm-mips/txx9/jmr3927.h @@ -0,0 +1,177 @@ +/* + * Defines for the TJSYS JMR-TX3927 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000-2001 Toshiba Corporation + */ +#ifndef __ASM_TXX9_JMR3927_H +#define __ASM_TXX9_JMR3927_H + +#include +#include +#include +#include + +/* CS */ +#define JMR3927_ROMCE0 0x1fc00000 /* 4M */ +#define JMR3927_ROMCE1 0x1e000000 /* 4M */ +#define JMR3927_ROMCE2 0x14000000 /* 16M */ +#define JMR3927_ROMCE3 0x10000000 /* 64M */ +#define JMR3927_ROMCE5 0x1d000000 /* 4M */ +#define JMR3927_SDCS0 0x00000000 /* 32M */ +#define JMR3927_SDCS1 0x02000000 /* 32M */ +/* PCI Direct Mappings */ + +#define JMR3927_PCIMEM 0x08000000 +#define JMR3927_PCIMEM_SIZE 0x08000000 /* 128M */ +#define JMR3927_PCIIO 0x15000000 +#define JMR3927_PCIIO_SIZE 0x01000000 /* 16M */ + +#define JMR3927_SDRAM_SIZE 0x02000000 /* 32M */ +#define JMR3927_PORT_BASE KSEG1 + +/* Address map (virtual address) */ +#define JMR3927_ROM0_BASE (KSEG1 + JMR3927_ROMCE0) +#define JMR3927_ROM1_BASE (KSEG1 + JMR3927_ROMCE1) +#define JMR3927_IOC_BASE (KSEG1 + JMR3927_ROMCE2) +#define JMR3927_PCIMEM_BASE (KSEG1 + JMR3927_PCIMEM) +#define JMR3927_PCIIO_BASE (KSEG1 + JMR3927_PCIIO) + +#define JMR3927_IOC_REV_ADDR (JMR3927_IOC_BASE + 0x00000000) +#define JMR3927_IOC_NVRAMB_ADDR (JMR3927_IOC_BASE + 0x00010000) +#define JMR3927_IOC_LED_ADDR (JMR3927_IOC_BASE + 0x00020000) +#define JMR3927_IOC_DIPSW_ADDR (JMR3927_IOC_BASE + 0x00030000) +#define JMR3927_IOC_BREV_ADDR (JMR3927_IOC_BASE + 0x00040000) +#define JMR3927_IOC_DTR_ADDR (JMR3927_IOC_BASE + 0x00050000) +#define JMR3927_IOC_INTS1_ADDR (JMR3927_IOC_BASE + 0x00080000) +#define JMR3927_IOC_INTS2_ADDR (JMR3927_IOC_BASE + 0x00090000) +#define JMR3927_IOC_INTM_ADDR (JMR3927_IOC_BASE + 0x000a0000) +#define JMR3927_IOC_INTP_ADDR (JMR3927_IOC_BASE + 0x000b0000) +#define JMR3927_IOC_RESET_ADDR (JMR3927_IOC_BASE + 0x000f0000) + +/* Flash ROM */ +#define JMR3927_FLASH_BASE (JMR3927_ROM0_BASE) +#define JMR3927_FLASH_SIZE 0x00400000 + +/* bits for IOC_REV/IOC_BREV (high byte) */ +#define JMR3927_IDT_MASK 0xfc +#define JMR3927_REV_MASK 0x03 +#define JMR3927_IOC_IDT 0xe0 + +/* bits for IOC_INTS1/IOC_INTS2/IOC_INTM/IOC_INTP (high byte) */ +#define JMR3927_IOC_INTB_PCIA 0 +#define JMR3927_IOC_INTB_PCIB 1 +#define JMR3927_IOC_INTB_PCIC 2 +#define JMR3927_IOC_INTB_PCID 3 +#define JMR3927_IOC_INTB_MODEM 4 +#define JMR3927_IOC_INTB_INT6 5 +#define JMR3927_IOC_INTB_INT7 6 +#define JMR3927_IOC_INTB_SOFT 7 +#define JMR3927_IOC_INTF_PCIA (1 << JMR3927_IOC_INTF_PCIA) +#define JMR3927_IOC_INTF_PCIB (1 << JMR3927_IOC_INTB_PCIB) +#define JMR3927_IOC_INTF_PCIC (1 << JMR3927_IOC_INTB_PCIC) +#define JMR3927_IOC_INTF_PCID (1 << JMR3927_IOC_INTB_PCID) +#define JMR3927_IOC_INTF_MODEM (1 << JMR3927_IOC_INTB_MODEM) +#define JMR3927_IOC_INTF_INT6 (1 << JMR3927_IOC_INTB_INT6) +#define JMR3927_IOC_INTF_INT7 (1 << JMR3927_IOC_INTB_INT7) +#define JMR3927_IOC_INTF_SOFT (1 << JMR3927_IOC_INTB_SOFT) + +/* bits for IOC_RESET (high byte) */ +#define JMR3927_IOC_RESET_CPU 1 +#define JMR3927_IOC_RESET_PCI 2 + +#if defined(__BIG_ENDIAN) +#define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned char *)(a)) = (d)) +#define jmr3927_ioc_reg_in(a) (*(volatile unsigned char *)(a)) +#elif defined(__LITTLE_ENDIAN) +#define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned char *)((a)^1)) = (d)) +#define jmr3927_ioc_reg_in(a) (*(volatile unsigned char *)((a)^1)) +#else +#error "No Endian" +#endif + +/* LED macro */ +#define jmr3927_led_set(n/*0-16*/) jmr3927_ioc_reg_out(~(n), JMR3927_IOC_LED_ADDR) + +#define jmr3927_led_and_set(n/*0-16*/) jmr3927_ioc_reg_out((~(n)) & jmr3927_ioc_reg_in(JMR3927_IOC_LED_ADDR), JMR3927_IOC_LED_ADDR) + +/* DIPSW4 macro */ +#define jmr3927_dipsw1() (gpio_get_value(11) == 0) +#define jmr3927_dipsw2() (gpio_get_value(10) == 0) +#define jmr3927_dipsw3() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 2) == 0) +#define jmr3927_dipsw4() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 1) == 0) + +/* + * IRQ mappings + */ + +/* These are the virtual IRQ numbers, we divide all IRQ's into + * 'spaces', the 'space' determines where and how to enable/disable + * that particular IRQ on an JMR machine. Add new 'spaces' as new + * IRQ hardware is supported. + */ +#define JMR3927_NR_IRQ_IRC 16 /* On-Chip IRC */ +#define JMR3927_NR_IRQ_IOC 8 /* PCI/MODEM/INT[6:7] */ + +#define JMR3927_IRQ_IRC TXX9_IRQ_BASE +#define JMR3927_IRQ_IOC (JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC) +#define JMR3927_IRQ_END (JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC) + +#define JMR3927_IRQ_IRC_INT0 (JMR3927_IRQ_IRC + TX3927_IR_INT0) +#define JMR3927_IRQ_IRC_INT1 (JMR3927_IRQ_IRC + TX3927_IR_INT1) +#define JMR3927_IRQ_IRC_INT2 (JMR3927_IRQ_IRC + TX3927_IR_INT2) +#define JMR3927_IRQ_IRC_INT3 (JMR3927_IRQ_IRC + TX3927_IR_INT3) +#define JMR3927_IRQ_IRC_INT4 (JMR3927_IRQ_IRC + TX3927_IR_INT4) +#define JMR3927_IRQ_IRC_INT5 (JMR3927_IRQ_IRC + TX3927_IR_INT5) +#define JMR3927_IRQ_IRC_SIO0 (JMR3927_IRQ_IRC + TX3927_IR_SIO0) +#define JMR3927_IRQ_IRC_SIO1 (JMR3927_IRQ_IRC + TX3927_IR_SIO1) +#define JMR3927_IRQ_IRC_SIO(ch) (JMR3927_IRQ_IRC + TX3927_IR_SIO(ch)) +#define JMR3927_IRQ_IRC_DMA (JMR3927_IRQ_IRC + TX3927_IR_DMA) +#define JMR3927_IRQ_IRC_PIO (JMR3927_IRQ_IRC + TX3927_IR_PIO) +#define JMR3927_IRQ_IRC_PCI (JMR3927_IRQ_IRC + TX3927_IR_PCI) +#define JMR3927_IRQ_IRC_TMR(ch) (JMR3927_IRQ_IRC + TX3927_IR_TMR(ch)) +#define JMR3927_IRQ_IOC_PCIA (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIA) +#define JMR3927_IRQ_IOC_PCIB (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIB) +#define JMR3927_IRQ_IOC_PCIC (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCIC) +#define JMR3927_IRQ_IOC_PCID (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_PCID) +#define JMR3927_IRQ_IOC_MODEM (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_MODEM) +#define JMR3927_IRQ_IOC_INT6 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT6) +#define JMR3927_IRQ_IOC_INT7 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT7) +#define JMR3927_IRQ_IOC_SOFT (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_SOFT) + +/* IOC (PCI, MODEM) */ +#define JMR3927_IRQ_IOCINT JMR3927_IRQ_IRC_INT1 +/* TC35815 100M Ether (JMR-TX3912:JPW4:2-3 Short) */ +#define JMR3927_IRQ_ETHER0 JMR3927_IRQ_IRC_INT3 + +/* Clocks */ +#define JMR3927_CORECLK 132710400 /* 132.7MHz */ +#define JMR3927_GBUSCLK (JMR3927_CORECLK / 2) /* 66.35MHz */ +#define JMR3927_IMCLK (JMR3927_CORECLK / 4) /* 33.17MHz */ + +/* + * TX3927 Pin Configuration: + * + * PCFG bits Avail Dead + * SELSIO[1:0]:11 RXD[1:0], TXD[1:0] PIO[6:3] + * SELSIOC[0]:1 CTS[0], RTS[0] INT[5:4] + * SELSIOC[1]:0,SELDSF:0, GSDAO[0],GPCST[3] CTS[1], RTS[1],DSF, + * GDBGE* PIO[2:1] + * SELDMA[2]:1 DMAREQ[2],DMAACK[2] PIO[13:12] + * SELTMR[2:0]:000 TIMER[1:0] + * SELCS:0,SELDMA[1]:0 PIO[11;10] SDCS_CE[7:6], + * DMAREQ[1],DMAACK[1] + * SELDMA[0]:1 DMAREQ[0],DMAACK[0] PIO[9:8] + * SELDMA[3]:1 DMAREQ[3],DMAACK[3] PIO[15:14] + * SELDONE:1 DMADONE PIO[7] + * + * Usable pins are: + * RXD[1;0],TXD[1:0],CTS[0],RTS[0], + * DMAREQ[0,2,3],DMAACK[0,2,3],DMADONE,PIO[0,10,11] + * INT[3:0] + */ + +#endif /* __ASM_TXX9_JMR3927_H */ diff --git a/include/asm-mips/txx9/rbtx4927.h b/include/asm-mips/txx9/rbtx4927.h new file mode 100644 index 000000000000..5531342bcc01 --- /dev/null +++ b/include/asm-mips/txx9/rbtx4927.h @@ -0,0 +1,49 @@ +/* + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2002 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_TXX9_RBTX4927_H +#define __ASM_TXX9_RBTX4927_H + +#include + +#ifdef CONFIG_PCI +#define TBTX4927_ISA_IO_OFFSET TX4927_PCIIO +#else +#define TBTX4927_ISA_IO_OFFSET 0 +#endif + +#define RBTX4927_SW_RESET_DO (void __iomem *)0xbc00f000UL +#define RBTX4927_SW_RESET_DO_SET 0x01 + +#define RBTX4927_SW_RESET_ENABLE (void __iomem *)0xbc00f002UL +#define RBTX4927_SW_RESET_ENABLE_SET 0x01 + +#define RBTX4927_RTL_8019_BASE (0x1c020280-TBTX4927_ISA_IO_OFFSET) +#define RBTX4927_RTL_8019_IRQ (TX4927_IRQ_PIC_BEG + 5) + +int toshiba_rbtx4927_irq_nested(int sw_irq); + +#endif /* __ASM_TXX9_RBTX4927_H */ diff --git a/include/asm-mips/txx9/rbtx4938.h b/include/asm-mips/txx9/rbtx4938.h new file mode 100644 index 000000000000..8450f735d056 --- /dev/null +++ b/include/asm-mips/txx9/rbtx4938.h @@ -0,0 +1,167 @@ +/* + * Definitions for TX4937/TX4938 + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#ifndef __ASM_TXX9_RBTX4938_H +#define __ASM_TXX9_RBTX4938_H + +#include +#include +#include + +/* CS */ +#define RBTX4938_CE0 0x1c000000 /* 64M */ +#define RBTX4938_CE2 0x17f00000 /* 1M */ + +/* Address map */ +#define RBTX4938_FPGA_REG_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000000) +#define RBTX4938_FPGA_REV_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000002) +#define RBTX4938_CONFIG1_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000004) +#define RBTX4938_CONFIG2_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000006) +#define RBTX4938_CONFIG3_ADDR (KSEG1 + RBTX4938_CE2 + 0x00000008) +#define RBTX4938_LED_ADDR (KSEG1 + RBTX4938_CE2 + 0x00001000) +#define RBTX4938_DIPSW_ADDR (KSEG1 + RBTX4938_CE2 + 0x00001002) +#define RBTX4938_BDIPSW_ADDR (KSEG1 + RBTX4938_CE2 + 0x00001004) +#define RBTX4938_IMASK_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002000) +#define RBTX4938_IMASK2_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002002) +#define RBTX4938_INTPOL_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002004) +#define RBTX4938_ISTAT_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002006) +#define RBTX4938_ISTAT2_ADDR (KSEG1 + RBTX4938_CE2 + 0x00002008) +#define RBTX4938_IMSTAT_ADDR (KSEG1 + RBTX4938_CE2 + 0x0000200a) +#define RBTX4938_IMSTAT2_ADDR (KSEG1 + RBTX4938_CE2 + 0x0000200c) +#define RBTX4938_SOFTINT_ADDR (KSEG1 + RBTX4938_CE2 + 0x00003000) +#define RBTX4938_PIOSEL_ADDR (KSEG1 + RBTX4938_CE2 + 0x00005000) +#define RBTX4938_SPICS_ADDR (KSEG1 + RBTX4938_CE2 + 0x00005002) +#define RBTX4938_SFPWR_ADDR (KSEG1 + RBTX4938_CE2 + 0x00005008) +#define RBTX4938_SFVOL_ADDR (KSEG1 + RBTX4938_CE2 + 0x0000500a) +#define RBTX4938_SOFTRESET_ADDR (KSEG1 + RBTX4938_CE2 + 0x00007000) +#define RBTX4938_SOFTRESETLOCK_ADDR (KSEG1 + RBTX4938_CE2 + 0x00007002) +#define RBTX4938_PCIRESET_ADDR (KSEG1 + RBTX4938_CE2 + 0x00007004) +#define RBTX4938_ETHER_BASE (KSEG1 + RBTX4938_CE2 + 0x00020000) + +/* Ethernet port address (Jumperless Mode (W12:Open)) */ +#define RBTX4938_ETHER_ADDR (RBTX4938_ETHER_BASE + 0x280) + +/* bits for ISTAT/IMASK/IMSTAT */ +#define RBTX4938_INTB_PCID 0 +#define RBTX4938_INTB_PCIC 1 +#define RBTX4938_INTB_PCIB 2 +#define RBTX4938_INTB_PCIA 3 +#define RBTX4938_INTB_RTC 4 +#define RBTX4938_INTB_ATA 5 +#define RBTX4938_INTB_MODEM 6 +#define RBTX4938_INTB_SWINT 7 +#define RBTX4938_INTF_PCID (1 << RBTX4938_INTB_PCID) +#define RBTX4938_INTF_PCIC (1 << RBTX4938_INTB_PCIC) +#define RBTX4938_INTF_PCIB (1 << RBTX4938_INTB_PCIB) +#define RBTX4938_INTF_PCIA (1 << RBTX4938_INTB_PCIA) +#define RBTX4938_INTF_RTC (1 << RBTX4938_INTB_RTC) +#define RBTX4938_INTF_ATA (1 << RBTX4938_INTB_ATA) +#define RBTX4938_INTF_MODEM (1 << RBTX4938_INTB_MODEM) +#define RBTX4938_INTF_SWINT (1 << RBTX4938_INTB_SWINT) + +#define rbtx4938_fpga_rev_addr ((__u8 __iomem *)RBTX4938_FPGA_REV_ADDR) +#define rbtx4938_led_addr ((__u8 __iomem *)RBTX4938_LED_ADDR) +#define rbtx4938_dipsw_addr ((__u8 __iomem *)RBTX4938_DIPSW_ADDR) +#define rbtx4938_bdipsw_addr ((__u8 __iomem *)RBTX4938_BDIPSW_ADDR) +#define rbtx4938_imask_addr ((__u8 __iomem *)RBTX4938_IMASK_ADDR) +#define rbtx4938_imask2_addr ((__u8 __iomem *)RBTX4938_IMASK2_ADDR) +#define rbtx4938_intpol_addr ((__u8 __iomem *)RBTX4938_INTPOL_ADDR) +#define rbtx4938_istat_addr ((__u8 __iomem *)RBTX4938_ISTAT_ADDR) +#define rbtx4938_istat2_addr ((__u8 __iomem *)RBTX4938_ISTAT2_ADDR) +#define rbtx4938_imstat_addr ((__u8 __iomem *)RBTX4938_IMSTAT_ADDR) +#define rbtx4938_imstat2_addr ((__u8 __iomem *)RBTX4938_IMSTAT2_ADDR) +#define rbtx4938_softint_addr ((__u8 __iomem *)RBTX4938_SOFTINT_ADDR) +#define rbtx4938_piosel_addr ((__u8 __iomem *)RBTX4938_PIOSEL_ADDR) +#define rbtx4938_spics_addr ((__u8 __iomem *)RBTX4938_SPICS_ADDR) +#define rbtx4938_sfpwr_addr ((__u8 __iomem *)RBTX4938_SFPWR_ADDR) +#define rbtx4938_sfvol_addr ((__u8 __iomem *)RBTX4938_SFVOL_ADDR) +#define rbtx4938_softreset_addr ((__u8 __iomem *)RBTX4938_SOFTRESET_ADDR) +#define rbtx4938_softresetlock_addr \ + ((__u8 __iomem *)RBTX4938_SOFTRESETLOCK_ADDR) +#define rbtx4938_pcireset_addr ((__u8 __iomem *)RBTX4938_PCIRESET_ADDR) + +/* + * IRQ mappings + */ + +#define RBTX4938_SOFT_INT0 0 /* not used */ +#define RBTX4938_SOFT_INT1 1 /* not used */ +#define RBTX4938_IRC_INT 2 +#define RBTX4938_TIMER_INT 7 + +/* These are the virtual IRQ numbers, we divide all IRQ's into + * 'spaces', the 'space' determines where and how to enable/disable + * that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new + * IRQ hardware is supported. + */ +#define RBTX4938_NR_IRQ_LOCAL 8 +#define RBTX4938_NR_IRQ_IRC 32 /* On-Chip IRC */ +#define RBTX4938_NR_IRQ_IOC 8 + +#define TX4938_IRQ_CP0_BEG MIPS_CPU_IRQ_BASE +#define TX4938_IRQ_CP0_END (MIPS_CPU_IRQ_BASE + 8 - 1) + +#define TX4938_IRQ_PIC_BEG TXX9_IRQ_BASE +#define TX4938_IRQ_PIC_END (TXX9_IRQ_BASE + TXx9_MAX_IR - 1) +#define TX4938_IRQ_NEST_EXT_ON_PIC (TX4938_IRQ_PIC_BEG+2) +#define TX4938_IRQ_NEST_PIC_ON_CP0 (TX4938_IRQ_CP0_BEG+2) +#define TX4938_IRQ_USER0 (TX4938_IRQ_CP0_BEG+0) +#define TX4938_IRQ_USER1 (TX4938_IRQ_CP0_BEG+1) +#define TX4938_IRQ_CPU_TIMER (TX4938_IRQ_CP0_BEG+7) + +#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG 0 +#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_END 7 + +#define TOSHIBA_RBTX4938_IRQ_IOC_BEG ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG) /* 56 */ +#define TOSHIBA_RBTX4938_IRQ_IOC_END ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_END) /* 63 */ +#define RBTX4938_IRQ_LOCAL TX4938_IRQ_CP0_BEG +#define RBTX4938_IRQ_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_NR_IRQ_LOCAL) +#define RBTX4938_IRQ_IOC (RBTX4938_IRQ_IRC + RBTX4938_NR_IRQ_IRC) +#define RBTX4938_IRQ_END (RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC) + +#define RBTX4938_IRQ_LOCAL_SOFT0 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT0) +#define RBTX4938_IRQ_LOCAL_SOFT1 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT1) +#define RBTX4938_IRQ_LOCAL_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_IRC_INT) +#define RBTX4938_IRQ_LOCAL_TIMER (RBTX4938_IRQ_LOCAL + RBTX4938_TIMER_INT) +#define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR) +#define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR) +#define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n)) +#define RBTX4938_IRQ_IRC_SIO(n) (RBTX4938_IRQ_IRC + TX4938_IR_SIO(n)) +#define RBTX4938_IRQ_IRC_DMA(ch, n) (RBTX4938_IRQ_IRC + TX4938_IR_DMA(ch, n)) +#define RBTX4938_IRQ_IRC_PIO (RBTX4938_IRQ_IRC + TX4938_IR_PIO) +#define RBTX4938_IRQ_IRC_PDMAC (RBTX4938_IRQ_IRC + TX4938_IR_PDMAC) +#define RBTX4938_IRQ_IRC_PCIC (RBTX4938_IRQ_IRC + TX4938_IR_PCIC) +#define RBTX4938_IRQ_IRC_TMR(n) (RBTX4938_IRQ_IRC + TX4938_IR_TMR(n)) +#define RBTX4938_IRQ_IRC_NDFMC (RBTX4938_IRQ_IRC + TX4938_IR_NDFMC) +#define RBTX4938_IRQ_IRC_PCIERR (RBTX4938_IRQ_IRC + TX4938_IR_PCIERR) +#define RBTX4938_IRQ_IRC_PCIPME (RBTX4938_IRQ_IRC + TX4938_IR_PCIPME) +#define RBTX4938_IRQ_IRC_ACLC (RBTX4938_IRQ_IRC + TX4938_IR_ACLC) +#define RBTX4938_IRQ_IRC_ACLCPME (RBTX4938_IRQ_IRC + TX4938_IR_ACLCPME) +#define RBTX4938_IRQ_IRC_PCIC1 (RBTX4938_IRQ_IRC + TX4938_IR_PCIC1) +#define RBTX4938_IRQ_IRC_SPI (RBTX4938_IRQ_IRC + TX4938_IR_SPI) +#define RBTX4938_IRQ_IOC_PCID (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCID) +#define RBTX4938_IRQ_IOC_PCIC (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIC) +#define RBTX4938_IRQ_IOC_PCIB (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIB) +#define RBTX4938_IRQ_IOC_PCIA (RBTX4938_IRQ_IOC + RBTX4938_INTB_PCIA) +#define RBTX4938_IRQ_IOC_RTC (RBTX4938_IRQ_IOC + RBTX4938_INTB_RTC) +#define RBTX4938_IRQ_IOC_ATA (RBTX4938_IRQ_IOC + RBTX4938_INTB_ATA) +#define RBTX4938_IRQ_IOC_MODEM (RBTX4938_IRQ_IOC + RBTX4938_INTB_MODEM) +#define RBTX4938_IRQ_IOC_SWINT (RBTX4938_IRQ_IOC + RBTX4938_INTB_SWINT) + + +/* IOC (PCI, etc) */ +#define RBTX4938_IRQ_IOCINT (TX4938_IRQ_NEST_EXT_ON_PIC) +/* Onboard 10M Ether */ +#define RBTX4938_IRQ_ETHER (TX4938_IRQ_NEST_EXT_ON_PIC + 1) + +#define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base) +#define RBTX4938_RTL_8019_IRQ (RBTX4938_IRQ_ETHER) + +#endif /* __ASM_TXX9_RBTX4938_H */ diff --git a/include/asm-mips/txx9/smsc_fdc37m81x.h b/include/asm-mips/txx9/smsc_fdc37m81x.h new file mode 100644 index 000000000000..9375e4fc2289 --- /dev/null +++ b/include/asm-mips/txx9/smsc_fdc37m81x.h @@ -0,0 +1,67 @@ +/* + * Interface for smsc fdc48m81x Super IO chip + * + * Author: MontaVista Software, Inc. source@mvista.com + * + * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright (C) 2004 MontaVista Software Inc. + * Manish Lachwani, mlachwani@mvista.com + */ + +#ifndef _SMSC_FDC37M81X_H_ +#define _SMSC_FDC37M81X_H_ + +/* Common Registers */ +#define SMSC_FDC37M81X_CONFIG_INDEX 0x00 +#define SMSC_FDC37M81X_CONFIG_DATA 0x01 +#define SMSC_FDC37M81X_CONF 0x02 +#define SMSC_FDC37M81X_INDEX 0x03 +#define SMSC_FDC37M81X_DNUM 0x07 +#define SMSC_FDC37M81X_DID 0x20 +#define SMSC_FDC37M81X_DREV 0x21 +#define SMSC_FDC37M81X_PCNT 0x22 +#define SMSC_FDC37M81X_PMGT 0x23 +#define SMSC_FDC37M81X_OSC 0x24 +#define SMSC_FDC37M81X_CONFPA0 0x26 +#define SMSC_FDC37M81X_CONFPA1 0x27 +#define SMSC_FDC37M81X_TEST4 0x2B +#define SMSC_FDC37M81X_TEST5 0x2C +#define SMSC_FDC37M81X_TEST1 0x2D +#define SMSC_FDC37M81X_TEST2 0x2E +#define SMSC_FDC37M81X_TEST3 0x2F + +/* Logical device numbers */ +#define SMSC_FDC37M81X_FDD 0x00 +#define SMSC_FDC37M81X_PARALLEL 0x03 +#define SMSC_FDC37M81X_SERIAL1 0x04 +#define SMSC_FDC37M81X_SERIAL2 0x05 +#define SMSC_FDC37M81X_KBD 0x07 +#define SMSC_FDC37M81X_AUXIO 0x08 +#define SMSC_FDC37M81X_NONE 0xff + +/* Logical device Config Registers */ +#define SMSC_FDC37M81X_ACTIVE 0x30 +#define SMSC_FDC37M81X_BASEADDR0 0x60 +#define SMSC_FDC37M81X_BASEADDR1 0x61 +#define SMSC_FDC37M81X_INT 0x70 +#define SMSC_FDC37M81X_INT2 0x72 +#define SMSC_FDC37M81X_LDCR_F0 0xF0 + +/* Chip Config Values */ +#define SMSC_FDC37M81X_CONFIG_ENTER 0x55 +#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa +#define SMSC_FDC37M81X_CHIP_ID 0x4d + +unsigned long __init smsc_fdc37m81x_init(unsigned long port); + +void smsc_fdc37m81x_config_beg(void); + +void smsc_fdc37m81x_config_end(void); + +void smsc_fdc37m81x_config_set(u8 reg, u8 val); + +#endif diff --git a/include/asm-mips/txx9/spi.h b/include/asm-mips/txx9/spi.h new file mode 100644 index 000000000000..ddfb2a0dc432 --- /dev/null +++ b/include/asm-mips/txx9/spi.h @@ -0,0 +1,19 @@ +/* + * Definitions for TX4937/TX4938 SPI + * + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#ifndef __ASM_TXX9_SPI_H +#define __ASM_TXX9_SPI_H + +extern int spi_eeprom_register(int chipid); +extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len); + +#endif /* __ASM_TXX9_SPI_H */ diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h new file mode 100644 index 000000000000..63b62d6061f5 --- /dev/null +++ b/include/asm-mips/txx9/tx3927.h @@ -0,0 +1,319 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Toshiba Corporation + */ +#ifndef __ASM_TXX9_TX3927_H +#define __ASM_TXX9_TX3927_H + +#include + +#define TX3927_SDRAMC_REG 0xfffe8000 +#define TX3927_ROMC_REG 0xfffe9000 +#define TX3927_DMA_REG 0xfffeb000 +#define TX3927_IRC_REG 0xfffec000 +#define TX3927_PCIC_REG 0xfffed000 +#define TX3927_CCFG_REG 0xfffee000 +#define TX3927_NR_TMR 3 +#define TX3927_TMR_REG(ch) (0xfffef000 + (ch) * 0x100) +#define TX3927_NR_SIO 2 +#define TX3927_SIO_REG(ch) (0xfffef300 + (ch) * 0x100) +#define TX3927_PIO_REG 0xfffef500 + +struct tx3927_sdramc_reg { + volatile unsigned long cr[8]; + volatile unsigned long tr[3]; + volatile unsigned long cmd; + volatile unsigned long smrs[2]; +}; + +struct tx3927_romc_reg { + volatile unsigned long cr[8]; +}; + +struct tx3927_dma_reg { + struct tx3927_dma_ch_reg { + volatile unsigned long cha; + volatile unsigned long sar; + volatile unsigned long dar; + volatile unsigned long cntr; + volatile unsigned long sair; + volatile unsigned long dair; + volatile unsigned long ccr; + volatile unsigned long csr; + } ch[4]; + volatile unsigned long dbr[8]; + volatile unsigned long tdhr; + volatile unsigned long mcr; + volatile unsigned long unused0; +}; + +#include + +#ifdef __BIG_ENDIAN +#define endian_def_s2(e1, e2) \ + volatile unsigned short e1, e2 +#define endian_def_sb2(e1, e2, e3) \ + volatile unsigned short e1;volatile unsigned char e2, e3 +#define endian_def_b2s(e1, e2, e3) \ + volatile unsigned char e1, e2;volatile unsigned short e3 +#define endian_def_b4(e1, e2, e3, e4) \ + volatile unsigned char e1, e2, e3, e4 +#else +#define endian_def_s2(e1, e2) \ + volatile unsigned short e2, e1 +#define endian_def_sb2(e1, e2, e3) \ + volatile unsigned char e3, e2;volatile unsigned short e1 +#define endian_def_b2s(e1, e2, e3) \ + volatile unsigned short e3;volatile unsigned char e2, e1 +#define endian_def_b4(e1, e2, e3, e4) \ + volatile unsigned char e4, e3, e2, e1 +#endif + +struct tx3927_pcic_reg { + endian_def_s2(did, vid); + endian_def_s2(pcistat, pcicmd); + endian_def_b4(cc, scc, rpli, rid); + endian_def_b4(unused0, ht, mlt, cls); + volatile unsigned long ioba; /* +10 */ + volatile unsigned long mba; + volatile unsigned long unused1[5]; + endian_def_s2(svid, ssvid); + volatile unsigned long unused2; /* +30 */ + endian_def_sb2(unused3, unused4, capptr); + volatile unsigned long unused5; + endian_def_b4(ml, mg, ip, il); + volatile unsigned long unused6; /* +40 */ + volatile unsigned long istat; + volatile unsigned long iim; + volatile unsigned long rrt; + volatile unsigned long unused7[3]; /* +50 */ + volatile unsigned long ipbmma; + volatile unsigned long ipbioma; /* +60 */ + volatile unsigned long ilbmma; + volatile unsigned long ilbioma; + volatile unsigned long unused8[9]; + volatile unsigned long tc; /* +90 */ + volatile unsigned long tstat; + volatile unsigned long tim; + volatile unsigned long tccmd; + volatile unsigned long pcirrt; /* +a0 */ + volatile unsigned long pcirrt_cmd; + volatile unsigned long pcirrdt; + volatile unsigned long unused9[3]; + volatile unsigned long tlboap; + volatile unsigned long tlbiap; + volatile unsigned long tlbmma; /* +c0 */ + volatile unsigned long tlbioma; + volatile unsigned long sc_msg; + volatile unsigned long sc_be; + volatile unsigned long tbl; /* +d0 */ + volatile unsigned long unused10[3]; + volatile unsigned long pwmng; /* +e0 */ + volatile unsigned long pwmngs; + volatile unsigned long unused11[6]; + volatile unsigned long req_trace; /* +100 */ + volatile unsigned long pbapmc; + volatile unsigned long pbapms; + volatile unsigned long pbapmim; + volatile unsigned long bm; /* +110 */ + volatile unsigned long cpcibrs; + volatile unsigned long cpcibgs; + volatile unsigned long pbacs; + volatile unsigned long iobas; /* +120 */ + volatile unsigned long mbas; + volatile unsigned long lbc; + volatile unsigned long lbstat; + volatile unsigned long lbim; /* +130 */ + volatile unsigned long pcistatim; + volatile unsigned long ica; + volatile unsigned long icd; + volatile unsigned long iiadp; /* +140 */ + volatile unsigned long iscdp; + volatile unsigned long mmas; + volatile unsigned long iomas; + volatile unsigned long ipciaddr; /* +150 */ + volatile unsigned long ipcidata; + volatile unsigned long ipcibe; +}; + +struct tx3927_ccfg_reg { + volatile unsigned long ccfg; + volatile unsigned long crir; + volatile unsigned long pcfg; + volatile unsigned long tear; + volatile unsigned long pdcr; +}; + +/* + * SDRAMC + */ + +/* + * ROMC + */ + +/* + * DMA + */ +/* bits for MCR */ +#define TX3927_DMA_MCR_EIS(ch) (0x10000000<<(ch)) +#define TX3927_DMA_MCR_DIS(ch) (0x01000000<<(ch)) +#define TX3927_DMA_MCR_RSFIF 0x00000080 +#define TX3927_DMA_MCR_FIFUM(ch) (0x00000008<<(ch)) +#define TX3927_DMA_MCR_LE 0x00000004 +#define TX3927_DMA_MCR_RPRT 0x00000002 +#define TX3927_DMA_MCR_MSTEN 0x00000001 + +/* bits for CCRn */ +#define TX3927_DMA_CCR_DBINH 0x04000000 +#define TX3927_DMA_CCR_SBINH 0x02000000 +#define TX3927_DMA_CCR_CHRST 0x01000000 +#define TX3927_DMA_CCR_RVBYTE 0x00800000 +#define TX3927_DMA_CCR_ACKPOL 0x00400000 +#define TX3927_DMA_CCR_REQPL 0x00200000 +#define TX3927_DMA_CCR_EGREQ 0x00100000 +#define TX3927_DMA_CCR_CHDN 0x00080000 +#define TX3927_DMA_CCR_DNCTL 0x00060000 +#define TX3927_DMA_CCR_EXTRQ 0x00010000 +#define TX3927_DMA_CCR_INTRQD 0x0000e000 +#define TX3927_DMA_CCR_INTENE 0x00001000 +#define TX3927_DMA_CCR_INTENC 0x00000800 +#define TX3927_DMA_CCR_INTENT 0x00000400 +#define TX3927_DMA_CCR_CHNEN 0x00000200 +#define TX3927_DMA_CCR_XFACT 0x00000100 +#define TX3927_DMA_CCR_SNOP 0x00000080 +#define TX3927_DMA_CCR_DSTINC 0x00000040 +#define TX3927_DMA_CCR_SRCINC 0x00000020 +#define TX3927_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c) +#define TX3927_DMA_CCR_XFSZ_1W TX3927_DMA_CCR_XFSZ(2) +#define TX3927_DMA_CCR_XFSZ_4W TX3927_DMA_CCR_XFSZ(4) +#define TX3927_DMA_CCR_XFSZ_8W TX3927_DMA_CCR_XFSZ(5) +#define TX3927_DMA_CCR_XFSZ_16W TX3927_DMA_CCR_XFSZ(6) +#define TX3927_DMA_CCR_XFSZ_32W TX3927_DMA_CCR_XFSZ(7) +#define TX3927_DMA_CCR_MEMIO 0x00000002 +#define TX3927_DMA_CCR_ONEAD 0x00000001 + +/* bits for CSRn */ +#define TX3927_DMA_CSR_CHNACT 0x00000100 +#define TX3927_DMA_CSR_ABCHC 0x00000080 +#define TX3927_DMA_CSR_NCHNC 0x00000040 +#define TX3927_DMA_CSR_NTRNFC 0x00000020 +#define TX3927_DMA_CSR_EXTDN 0x00000010 +#define TX3927_DMA_CSR_CFERR 0x00000008 +#define TX3927_DMA_CSR_CHERR 0x00000004 +#define TX3927_DMA_CSR_DESERR 0x00000002 +#define TX3927_DMA_CSR_SORERR 0x00000001 + +/* + * IRC + */ +#define TX3927_IR_INT0 0 +#define TX3927_IR_INT1 1 +#define TX3927_IR_INT2 2 +#define TX3927_IR_INT3 3 +#define TX3927_IR_INT4 4 +#define TX3927_IR_INT5 5 +#define TX3927_IR_SIO0 6 +#define TX3927_IR_SIO1 7 +#define TX3927_IR_SIO(ch) (6 + (ch)) +#define TX3927_IR_DMA 8 +#define TX3927_IR_PIO 9 +#define TX3927_IR_PCI 10 +#define TX3927_IR_TMR(ch) (13 + (ch)) +#define TX3927_NUM_IR 16 + +/* + * PCIC + */ +/* bits for PCICMD */ +/* see PCI_COMMAND_XXX in linux/pci.h */ + +/* bits for PCISTAT */ +/* see PCI_STATUS_XXX in linux/pci.h */ +#define PCI_STATUS_NEW_CAP 0x0010 + +/* bits for TC */ +#define TX3927_PCIC_TC_OF16E 0x00000020 +#define TX3927_PCIC_TC_IF8E 0x00000010 +#define TX3927_PCIC_TC_OF8E 0x00000008 + +/* bits for IOBA/MBA */ +/* see PCI_BASE_ADDRESS_XXX in linux/pci.h */ + +/* bits for PBAPMC */ +#define TX3927_PCIC_PBAPMC_RPBA 0x00000004 +#define TX3927_PCIC_PBAPMC_PBAEN 0x00000002 +#define TX3927_PCIC_PBAPMC_BMCEN 0x00000001 + +/* bits for LBSTAT/LBIM */ +#define TX3927_PCIC_LBIM_ALL 0x0000003e + +/* bits for PCISTATIM (see also PCI_STATUS_XXX in linux/pci.h */ +#define TX3927_PCIC_PCISTATIM_ALL 0x0000f900 + +/* bits for LBC */ +#define TX3927_PCIC_LBC_IBSE 0x00004000 +#define TX3927_PCIC_LBC_TIBSE 0x00002000 +#define TX3927_PCIC_LBC_TMFBSE 0x00001000 +#define TX3927_PCIC_LBC_HRST 0x00000800 +#define TX3927_PCIC_LBC_SRST 0x00000400 +#define TX3927_PCIC_LBC_EPCAD 0x00000200 +#define TX3927_PCIC_LBC_MSDSE 0x00000100 +#define TX3927_PCIC_LBC_CRR 0x00000080 +#define TX3927_PCIC_LBC_ILMDE 0x00000040 +#define TX3927_PCIC_LBC_ILIDE 0x00000020 + +#define TX3927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) +#define TX3927_PCIC_MAX_DEVNU TX3927_PCIC_IDSEL_AD_TO_SLOT(32) + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX3927_CCFG_TLBOFF 0x00020000 +#define TX3927_CCFG_BEOW 0x00010000 +#define TX3927_CCFG_WR 0x00008000 +#define TX3927_CCFG_TOE 0x00004000 +#define TX3927_CCFG_PCIXARB 0x00002000 +#define TX3927_CCFG_PCI3 0x00001000 +#define TX3927_CCFG_PSNP 0x00000800 +#define TX3927_CCFG_PPRI 0x00000400 +#define TX3927_CCFG_PLLM 0x00000030 +#define TX3927_CCFG_ENDIAN 0x00000004 +#define TX3927_CCFG_HALT 0x00000002 +#define TX3927_CCFG_ACEHOLD 0x00000001 + +/* PCFG : Pin Configuration */ +#define TX3927_PCFG_SYSCLKEN 0x08000000 +#define TX3927_PCFG_SDRCLKEN_ALL 0x07c00000 +#define TX3927_PCFG_SDRCLKEN(ch) (0x00400000<<(ch)) +#define TX3927_PCFG_PCICLKEN_ALL 0x003c0000 +#define TX3927_PCFG_PCICLKEN(ch) (0x00040000<<(ch)) +#define TX3927_PCFG_SELALL 0x0003ffff +#define TX3927_PCFG_SELCS 0x00020000 +#define TX3927_PCFG_SELDSF 0x00010000 +#define TX3927_PCFG_SELSIOC_ALL 0x0000c000 +#define TX3927_PCFG_SELSIOC(ch) (0x00004000<<(ch)) +#define TX3927_PCFG_SELSIO_ALL 0x00003000 +#define TX3927_PCFG_SELSIO(ch) (0x00001000<<(ch)) +#define TX3927_PCFG_SELTMR_ALL 0x00000e00 +#define TX3927_PCFG_SELTMR(ch) (0x00000200<<(ch)) +#define TX3927_PCFG_SELDONE 0x00000100 +#define TX3927_PCFG_INTDMA_ALL 0x000000f0 +#define TX3927_PCFG_INTDMA(ch) (0x00000010<<(ch)) +#define TX3927_PCFG_SELDMA_ALL 0x0000000f +#define TX3927_PCFG_SELDMA(ch) (0x00000001<<(ch)) + +#define tx3927_sdramcptr ((struct tx3927_sdramc_reg *)TX3927_SDRAMC_REG) +#define tx3927_romcptr ((struct tx3927_romc_reg *)TX3927_ROMC_REG) +#define tx3927_dmaptr ((struct tx3927_dma_reg *)TX3927_DMA_REG) +#define tx3927_pcicptr ((struct tx3927_pcic_reg *)TX3927_PCIC_REG) +#define tx3927_ccfgptr ((struct tx3927_ccfg_reg *)TX3927_CCFG_REG) +#define tx3927_tmrptr(ch) ((struct txx927_tmr_reg *)TX3927_TMR_REG(ch)) +#define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch)) +#define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG) + +#endif /* __ASM_TXX9_TX3927_H */ diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h new file mode 100644 index 000000000000..f21a7b1831e5 --- /dev/null +++ b/include/asm-mips/txx9/tx4927.h @@ -0,0 +1,280 @@ +/* + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2006 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_TXX9_TX4927_H +#define __ASM_TXX9_TX4927_H + +#include + +#define TX4927_IRQ_CP0_BEG MIPS_CPU_IRQ_BASE +#define TX4927_IRQ_CP0_END (MIPS_CPU_IRQ_BASE + 8 - 1) + +#define TX4927_IRQ_PIC_BEG TXX9_IRQ_BASE +#define TX4927_IRQ_PIC_END (TXX9_IRQ_BASE + TXx9_MAX_IR - 1) + + +#define TX4927_IRQ_USER0 (TX4927_IRQ_CP0_BEG+0) +#define TX4927_IRQ_USER1 (TX4927_IRQ_CP0_BEG+1) +#define TX4927_IRQ_NEST_PIC_ON_CP0 (TX4927_IRQ_CP0_BEG+2) +#define TX4927_IRQ_CPU_TIMER (TX4927_IRQ_CP0_BEG+7) + +#define TX4927_IRQ_NEST_EXT_ON_PIC (TX4927_IRQ_PIC_BEG+3) + +#define TX4927_CCFG_TOE 0x00004000 +#define TX4927_CCFG_WR 0x00008000 +#define TX4927_CCFG_TINTDIS 0x01000000 + +#define TX4927_PCIMEM 0x08000000 +#define TX4927_PCIMEM_SIZE 0x08000000 +#define TX4927_PCIIO 0x16000000 +#define TX4927_PCIIO_SIZE 0x01000000 + +#define TX4927_SDRAMC_REG 0xff1f8000 +#define TX4927_EBUSC_REG 0xff1f9000 +#define TX4927_PCIC_REG 0xff1fd000 +#define TX4927_CCFG_REG 0xff1fe000 +#define TX4927_IRC_REG 0xff1ff600 +#define TX4927_NR_TMR 3 +#define TX4927_TMR_REG(ch) (0xff1ff000 + (ch) * 0x100) + +/* bits for ISTAT3/IMASK3/IMSTAT3 */ +#define TX4927_INT3B_PCID 0 +#define TX4927_INT3B_PCIC 1 +#define TX4927_INT3B_PCIB 2 +#define TX4927_INT3B_PCIA 3 +#define TX4927_INT3F_PCID (1 << TX4927_INT3B_PCID) +#define TX4927_INT3F_PCIC (1 << TX4927_INT3B_PCIC) +#define TX4927_INT3F_PCIB (1 << TX4927_INT3B_PCIB) +#define TX4927_INT3F_PCIA (1 << TX4927_INT3B_PCIA) + +#define TX4927_NR_IRQ_LOCAL TX4927_IRQ_PIC_BEG +#define TX4927_NR_IRQ_IRC 32 /* On-Chip IRC */ + +#define TX4927_IR_PCIC 16 +#define TX4927_IR_PCIERR 22 +#define TX4927_IR_PCIPMA 23 +#define TX4927_IRQ_IRC_PCIC (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIC) +#define TX4927_IRQ_IRC_PCIERR (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIERR) +#define TX4927_IRQ_IOC1 (TX4927_NR_IRQ_LOCAL + TX4927_NR_IRQ_IRC) +#define TX4927_IRQ_IOC_PCID (TX4927_IRQ_IOC1 + TX4927_INT3B_PCID) +#define TX4927_IRQ_IOC_PCIC (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIC) +#define TX4927_IRQ_IOC_PCIB (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIB) +#define TX4927_IRQ_IOC_PCIA (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIA) + +#ifdef _LANGUAGE_ASSEMBLY +#define _CONST64(c) c +#else +#define _CONST64(c) c##ull + +#include + +struct tx4927_sdramc_reg { + volatile unsigned long long cr[4]; + volatile unsigned long long unused0[4]; + volatile unsigned long long tr; + volatile unsigned long long unused1[2]; + volatile unsigned long long cmd; +}; + +struct tx4927_ebusc_reg { + volatile unsigned long long cr[8]; +}; + +struct tx4927_ccfg_reg { + volatile unsigned long long ccfg; + volatile unsigned long long crir; + volatile unsigned long long pcfg; + volatile unsigned long long tear; + volatile unsigned long long clkctr; + volatile unsigned long long unused0; + volatile unsigned long long garbc; + volatile unsigned long long unused1; + volatile unsigned long long unused2; + volatile unsigned long long ramp; +}; + +struct tx4927_pcic_reg { + volatile unsigned long pciid; + volatile unsigned long pcistatus; + volatile unsigned long pciccrev; + volatile unsigned long pcicfg1; + volatile unsigned long p2gm0plbase; /* +10 */ + volatile unsigned long p2gm0pubase; + volatile unsigned long p2gm1plbase; + volatile unsigned long p2gm1pubase; + volatile unsigned long p2gm2pbase; /* +20 */ + volatile unsigned long p2giopbase; + volatile unsigned long unused0; + volatile unsigned long pcisid; + volatile unsigned long unused1; /* +30 */ + volatile unsigned long pcicapptr; + volatile unsigned long unused2; + volatile unsigned long pcicfg2; + volatile unsigned long g2ptocnt; /* +40 */ + volatile unsigned long unused3[15]; + volatile unsigned long g2pstatus; /* +80 */ + volatile unsigned long g2pmask; + volatile unsigned long pcisstatus; + volatile unsigned long pcimask; + volatile unsigned long p2gcfg; /* +90 */ + volatile unsigned long p2gstatus; + volatile unsigned long p2gmask; + volatile unsigned long p2gccmd; + volatile unsigned long unused4[24]; /* +a0 */ + volatile unsigned long pbareqport; /* +100 */ + volatile unsigned long pbacfg; + volatile unsigned long pbastatus; + volatile unsigned long pbamask; + volatile unsigned long pbabm; /* +110 */ + volatile unsigned long pbacreq; + volatile unsigned long pbacgnt; + volatile unsigned long pbacstate; + volatile unsigned long long g2pmgbase[3]; /* +120 */ + volatile unsigned long long g2piogbase; + volatile unsigned long g2pmmask[3]; /* +140 */ + volatile unsigned long g2piomask; + volatile unsigned long long g2pmpbase[3]; /* +150 */ + volatile unsigned long long g2piopbase; + volatile unsigned long pciccfg; /* +170 */ + volatile unsigned long pcicstatus; + volatile unsigned long pcicmask; + volatile unsigned long unused5; + volatile unsigned long long p2gmgbase[3]; /* +180 */ + volatile unsigned long long p2giogbase; + volatile unsigned long g2pcfgadrs; /* +1a0 */ + volatile unsigned long g2pcfgdata; + volatile unsigned long unused6[8]; + volatile unsigned long g2pintack; + volatile unsigned long g2pspc; + volatile unsigned long unused7[12]; /* +1d0 */ + volatile unsigned long long pdmca; /* +200 */ + volatile unsigned long long pdmga; + volatile unsigned long long pdmpa; + volatile unsigned long long pdmcut; + volatile unsigned long long pdmcnt; /* +220 */ + volatile unsigned long long pdmsts; + volatile unsigned long long unused8[2]; + volatile unsigned long long pdmdb[4]; /* +240 */ + volatile unsigned long long pdmtdh; /* +260 */ + volatile unsigned long long pdmdms; +}; + +#endif /* _LANGUAGE_ASSEMBLY */ + +/* + * PCIC + */ + +/* bits for G2PSTATUS/G2PMASK */ +#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003 +#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002 +#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001 + +/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */ +#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900 + +/* bits for PBACFG */ +#define TX4927_PCIC_PBACFG_RPBA 0x00000004 +#define TX4927_PCIC_PBACFG_PBAEN 0x00000002 +#define TX4927_PCIC_PBACFG_BMCEN 0x00000001 + +/* bits for G2PMnGBASE */ +#define TX4927_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000) +#define TX4927_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000) + +/* bits for G2PIOGBASE */ +#define TX4927_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000) +#define TX4927_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000) + +/* bits for PCICSTATUS/PCICMASK */ +#define TX4927_PCIC_PCICSTATUS_ALL 0x000007dc + +/* bits for PCICCFG */ +#define TX4927_PCIC_PCICCFG_LBWC_MASK 0x0fff0000 +#define TX4927_PCIC_PCICCFG_HRST 0x00000800 +#define TX4927_PCIC_PCICCFG_SRST 0x00000400 +#define TX4927_PCIC_PCICCFG_IRBER 0x00000200 +#define TX4927_PCIC_PCICCFG_IMSE0 0x00000100 +#define TX4927_PCIC_PCICCFG_IMSE1 0x00000080 +#define TX4927_PCIC_PCICCFG_IMSE2 0x00000040 +#define TX4927_PCIC_PCICCFG_IISE 0x00000020 +#define TX4927_PCIC_PCICCFG_ATR 0x00000010 +#define TX4927_PCIC_PCICCFG_ICAE 0x00000008 + +/* bits for P2GMnGBASE */ +#define TX4927_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000) +#define TX4927_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000) +#define TX4927_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000) + +/* bits for P2GIOGBASE */ +#define TX4927_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000) +#define TX4927_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000) +#define TX4927_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000) + +#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) +#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32) + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX4927_CCFG_PCI66 0x00800000 +#define TX4927_CCFG_PCIMIDE 0x00400000 +#define TX4927_CCFG_PCIXARB 0x00002000 +#define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800 +#define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000 +#define TX4927_CCFG_PCIDIVMODE_3 0x00000800 +#define TX4927_CCFG_PCIDIVMODE_5 0x00001000 +#define TX4927_CCFG_PCIDIVMODE_6 0x00001800 + +#define TX4937_CCFG_PCIDIVMODE_MASK 0x00001c00 +#define TX4937_CCFG_PCIDIVMODE_8 0x00000000 +#define TX4937_CCFG_PCIDIVMODE_4 0x00000400 +#define TX4937_CCFG_PCIDIVMODE_9 0x00000800 +#define TX4937_CCFG_PCIDIVMODE_4_5 0x00000c00 +#define TX4937_CCFG_PCIDIVMODE_10 0x00001000 +#define TX4937_CCFG_PCIDIVMODE_5 0x00001400 +#define TX4937_CCFG_PCIDIVMODE_11 0x00001800 +#define TX4937_CCFG_PCIDIVMODE_5_5 0x00001c00 + +/* PCFG : Pin Configuration */ +#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000 +#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) + +/* CLKCTR : Clock Control */ +#define TX4927_CLKCTR_PCICKD 0x00400000 +#define TX4927_CLKCTR_PCIRST 0x00000040 + +#ifndef _LANGUAGE_ASSEMBLY + +#define tx4927_sdramcptr ((struct tx4927_sdramc_reg *)TX4927_SDRAMC_REG) +#define tx4927_pcicptr ((struct tx4927_pcic_reg *)TX4927_PCIC_REG) +#define tx4927_ccfgptr ((struct tx4927_ccfg_reg *)TX4927_CCFG_REG) +#define tx4927_ebuscptr ((struct tx4927_ebusc_reg *)TX4927_EBUSC_REG) + +#endif /* _LANGUAGE_ASSEMBLY */ + +#endif /* __ASM_TXX9_TX4927_H */ diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h new file mode 100644 index 000000000000..7f9cfef1c6d2 --- /dev/null +++ b/include/asm-mips/txx9/tx4938.h @@ -0,0 +1,627 @@ +/* + * Definitions for TX4937/TX4938 + * Copyright (C) 2000-2001 Toshiba Corporation + * + * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is + * licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) + */ +#ifndef __ASM_TXX9_TX4938_H +#define __ASM_TXX9_TX4938_H + +#define tx4938_read_nfmc(addr) (*(volatile unsigned int *)(addr)) +#define tx4938_write_nfmc(b, addr) (*(volatile unsigned int *)(addr)) = (b) + +#define TX4938_NR_IRQ_LOCAL TX4938_IRQ_PIC_BEG + +#define TX4938_IRQ_IRC_PCIC (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIC) +#define TX4938_IRQ_IRC_PCIERR (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIERR) + +#define TX4938_PCIIO_0 0x10000000 +#define TX4938_PCIIO_1 0x01010000 +#define TX4938_PCIMEM_0 0x08000000 +#define TX4938_PCIMEM_1 0x11000000 + +#define TX4938_PCIIO_SIZE_0 0x01000000 +#define TX4938_PCIIO_SIZE_1 0x00010000 +#define TX4938_PCIMEM_SIZE_0 0x08000000 +#define TX4938_PCIMEM_SIZE_1 0x00010000 + +#define TX4938_REG_BASE 0xff1f0000 /* == TX4937_REG_BASE */ +#define TX4938_REG_SIZE 0x00010000 /* == TX4937_REG_SIZE */ + +/* NDFMC, SRAMC, PCIC1, SPIC: TX4938 only */ +#define TX4938_NDFMC_REG (TX4938_REG_BASE + 0x5000) +#define TX4938_SRAMC_REG (TX4938_REG_BASE + 0x6000) +#define TX4938_PCIC1_REG (TX4938_REG_BASE + 0x7000) +#define TX4938_SDRAMC_REG (TX4938_REG_BASE + 0x8000) +#define TX4938_EBUSC_REG (TX4938_REG_BASE + 0x9000) +#define TX4938_DMA_REG(ch) (TX4938_REG_BASE + 0xb000 + (ch) * 0x800) +#define TX4938_PCIC_REG (TX4938_REG_BASE + 0xd000) +#define TX4938_CCFG_REG (TX4938_REG_BASE + 0xe000) +#define TX4938_NR_TMR 3 +#define TX4938_TMR_REG(ch) ((TX4938_REG_BASE + 0xf000) + (ch) * 0x100) +#define TX4938_NR_SIO 2 +#define TX4938_SIO_REG(ch) ((TX4938_REG_BASE + 0xf300) + (ch) * 0x100) +#define TX4938_PIO_REG (TX4938_REG_BASE + 0xf500) +#define TX4938_IRC_REG (TX4938_REG_BASE + 0xf600) +#define TX4938_ACLC_REG (TX4938_REG_BASE + 0xf700) +#define TX4938_SPI_REG (TX4938_REG_BASE + 0xf800) + +#ifdef __ASSEMBLY__ +#define _CONST64(c) c +#else +#define _CONST64(c) c##ull + +#include + +#ifdef __BIG_ENDIAN +#define endian_def_l2(e1, e2) \ + volatile unsigned long e1, e2 +#define endian_def_s2(e1, e2) \ + volatile unsigned short e1, e2 +#define endian_def_sb2(e1, e2, e3) \ + volatile unsigned short e1;volatile unsigned char e2, e3 +#define endian_def_b2s(e1, e2, e3) \ + volatile unsigned char e1, e2;volatile unsigned short e3 +#define endian_def_b4(e1, e2, e3, e4) \ + volatile unsigned char e1, e2, e3, e4 +#else +#define endian_def_l2(e1, e2) \ + volatile unsigned long e2, e1 +#define endian_def_s2(e1, e2) \ + volatile unsigned short e2, e1 +#define endian_def_sb2(e1, e2, e3) \ + volatile unsigned char e3, e2;volatile unsigned short e1 +#define endian_def_b2s(e1, e2, e3) \ + volatile unsigned short e3;volatile unsigned char e2, e1 +#define endian_def_b4(e1, e2, e3, e4) \ + volatile unsigned char e4, e3, e2, e1 +#endif + + +struct tx4938_sdramc_reg { + volatile unsigned long long cr[4]; + volatile unsigned long long unused0[4]; + volatile unsigned long long tr; + volatile unsigned long long unused1[2]; + volatile unsigned long long cmd; + volatile unsigned long long sfcmd; +}; + +struct tx4938_ebusc_reg { + volatile unsigned long long cr[8]; +}; + +struct tx4938_dma_reg { + struct tx4938_dma_ch_reg { + volatile unsigned long long cha; + volatile unsigned long long sar; + volatile unsigned long long dar; + endian_def_l2(unused0, cntr); + endian_def_l2(unused1, sair); + endian_def_l2(unused2, dair); + endian_def_l2(unused3, ccr); + endian_def_l2(unused4, csr); + } ch[4]; + volatile unsigned long long dbr[8]; + volatile unsigned long long tdhr; + volatile unsigned long long midr; + endian_def_l2(unused0, mcr); +}; + +struct tx4938_pcic_reg { + volatile unsigned long pciid; + volatile unsigned long pcistatus; + volatile unsigned long pciccrev; + volatile unsigned long pcicfg1; + volatile unsigned long p2gm0plbase; /* +10 */ + volatile unsigned long p2gm0pubase; + volatile unsigned long p2gm1plbase; + volatile unsigned long p2gm1pubase; + volatile unsigned long p2gm2pbase; /* +20 */ + volatile unsigned long p2giopbase; + volatile unsigned long unused0; + volatile unsigned long pcisid; + volatile unsigned long unused1; /* +30 */ + volatile unsigned long pcicapptr; + volatile unsigned long unused2; + volatile unsigned long pcicfg2; + volatile unsigned long g2ptocnt; /* +40 */ + volatile unsigned long unused3[15]; + volatile unsigned long g2pstatus; /* +80 */ + volatile unsigned long g2pmask; + volatile unsigned long pcisstatus; + volatile unsigned long pcimask; + volatile unsigned long p2gcfg; /* +90 */ + volatile unsigned long p2gstatus; + volatile unsigned long p2gmask; + volatile unsigned long p2gccmd; + volatile unsigned long unused4[24]; /* +a0 */ + volatile unsigned long pbareqport; /* +100 */ + volatile unsigned long pbacfg; + volatile unsigned long pbastatus; + volatile unsigned long pbamask; + volatile unsigned long pbabm; /* +110 */ + volatile unsigned long pbacreq; + volatile unsigned long pbacgnt; + volatile unsigned long pbacstate; + volatile unsigned long long g2pmgbase[3]; /* +120 */ + volatile unsigned long long g2piogbase; + volatile unsigned long g2pmmask[3]; /* +140 */ + volatile unsigned long g2piomask; + volatile unsigned long long g2pmpbase[3]; /* +150 */ + volatile unsigned long long g2piopbase; + volatile unsigned long pciccfg; /* +170 */ + volatile unsigned long pcicstatus; + volatile unsigned long pcicmask; + volatile unsigned long unused5; + volatile unsigned long long p2gmgbase[3]; /* +180 */ + volatile unsigned long long p2giogbase; + volatile unsigned long g2pcfgadrs; /* +1a0 */ + volatile unsigned long g2pcfgdata; + volatile unsigned long unused6[8]; + volatile unsigned long g2pintack; + volatile unsigned long g2pspc; + volatile unsigned long unused7[12]; /* +1d0 */ + volatile unsigned long long pdmca; /* +200 */ + volatile unsigned long long pdmga; + volatile unsigned long long pdmpa; + volatile unsigned long long pdmctr; + volatile unsigned long long pdmcfg; /* +220 */ + volatile unsigned long long pdmsts; +}; + +struct tx4938_aclc_reg { + volatile unsigned long acctlen; + volatile unsigned long acctldis; + volatile unsigned long acregacc; + volatile unsigned long unused0; + volatile unsigned long acintsts; + volatile unsigned long acintmsts; + volatile unsigned long acinten; + volatile unsigned long acintdis; + volatile unsigned long acsemaph; + volatile unsigned long unused1[7]; + volatile unsigned long acgpidat; + volatile unsigned long acgpodat; + volatile unsigned long acslten; + volatile unsigned long acsltdis; + volatile unsigned long acfifosts; + volatile unsigned long unused2[11]; + volatile unsigned long acdmasts; + volatile unsigned long acdmasel; + volatile unsigned long unused3[6]; + volatile unsigned long acaudodat; + volatile unsigned long acsurrdat; + volatile unsigned long accentdat; + volatile unsigned long aclfedat; + volatile unsigned long acaudiat; + volatile unsigned long unused4; + volatile unsigned long acmodoat; + volatile unsigned long acmodidat; + volatile unsigned long unused5[15]; + volatile unsigned long acrevid; +}; + + +struct tx4938_tmr_reg { + volatile unsigned long tcr; + volatile unsigned long tisr; + volatile unsigned long cpra; + volatile unsigned long cprb; + volatile unsigned long itmr; + volatile unsigned long unused0[3]; + volatile unsigned long ccdr; + volatile unsigned long unused1[3]; + volatile unsigned long pgmr; + volatile unsigned long unused2[3]; + volatile unsigned long wtmr; + volatile unsigned long unused3[43]; + volatile unsigned long trr; +}; + +struct tx4938_sio_reg { + volatile unsigned long lcr; + volatile unsigned long dicr; + volatile unsigned long disr; + volatile unsigned long cisr; + volatile unsigned long fcr; + volatile unsigned long flcr; + volatile unsigned long bgr; + volatile unsigned long tfifo; + volatile unsigned long rfifo; +}; + +struct tx4938_ndfmc_reg { + endian_def_l2(unused0, dtr); + endian_def_l2(unused1, mcr); + endian_def_l2(unused2, sr); + endian_def_l2(unused3, isr); + endian_def_l2(unused4, imr); + endian_def_l2(unused5, spr); + endian_def_l2(unused6, rstr); +}; + +struct tx4938_spi_reg { + volatile unsigned long mcr; + volatile unsigned long cr0; + volatile unsigned long cr1; + volatile unsigned long fs; + volatile unsigned long unused1; + volatile unsigned long sr; + volatile unsigned long dr; + volatile unsigned long unused2; +}; + +struct tx4938_sramc_reg { + volatile unsigned long long cr; +}; + +struct tx4938_ccfg_reg { + volatile unsigned long long ccfg; + volatile unsigned long long crir; + volatile unsigned long long pcfg; + volatile unsigned long long tear; + volatile unsigned long long clkctr; + volatile unsigned long long unused0; + volatile unsigned long long garbc; + volatile unsigned long long unused1; + volatile unsigned long long unused2; + volatile unsigned long long ramp; + volatile unsigned long long unused3; + volatile unsigned long long jmpadr; +}; + +#undef endian_def_l2 +#undef endian_def_s2 +#undef endian_def_sb2 +#undef endian_def_b2s +#undef endian_def_b4 + +#endif /* __ASSEMBLY__ */ + +/* + * NDFMC + */ + +/* NDFMCR : NDFMC Mode Control */ +#define TX4938_NDFMCR_WE 0x80 +#define TX4938_NDFMCR_ECC_ALL 0x60 +#define TX4938_NDFMCR_ECC_RESET 0x60 +#define TX4938_NDFMCR_ECC_READ 0x40 +#define TX4938_NDFMCR_ECC_ON 0x20 +#define TX4938_NDFMCR_ECC_OFF 0x00 +#define TX4938_NDFMCR_CE 0x10 +#define TX4938_NDFMCR_BSPRT 0x04 +#define TX4938_NDFMCR_ALE 0x02 +#define TX4938_NDFMCR_CLE 0x01 + +/* NDFMCR : NDFMC Status */ +#define TX4938_NDFSR_BUSY 0x80 + +/* NDFMCR : NDFMC Reset */ +#define TX4938_NDFRSTR_RST 0x01 + +/* + * IRC + */ + +#define TX4938_IR_ECCERR 0 +#define TX4938_IR_WTOERR 1 +#define TX4938_NUM_IR_INT 6 +#define TX4938_IR_INT(n) (2 + (n)) +#define TX4938_NUM_IR_SIO 2 +#define TX4938_IR_SIO(n) (8 + (n)) +#define TX4938_NUM_IR_DMA 4 +#define TX4938_IR_DMA(ch, n) ((ch ? 27 : 10) + (n)) /* 10-13, 27-30 */ +#define TX4938_IR_PIO 14 +#define TX4938_IR_PDMAC 15 +#define TX4938_IR_PCIC 16 +#define TX4938_NUM_IR_TMR 3 +#define TX4938_IR_TMR(n) (17 + (n)) +#define TX4938_IR_NDFMC 21 +#define TX4938_IR_PCIERR 22 +#define TX4938_IR_PCIPME 23 +#define TX4938_IR_ACLC 24 +#define TX4938_IR_ACLCPME 25 +#define TX4938_IR_PCIC1 26 +#define TX4938_IR_SPI 31 +#define TX4938_NUM_IR 32 +/* multiplex */ +#define TX4938_IR_ETH0 TX4938_IR_INT(4) +#define TX4938_IR_ETH1 TX4938_IR_INT(3) + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX4938_CCFG_WDRST _CONST64(0x0000020000000000) +#define TX4938_CCFG_WDREXEN _CONST64(0x0000010000000000) +#define TX4938_CCFG_BCFG_MASK _CONST64(0x000000ff00000000) +#define TX4938_CCFG_TINTDIS 0x01000000 +#define TX4938_CCFG_PCI66 0x00800000 +#define TX4938_CCFG_PCIMODE 0x00400000 +#define TX4938_CCFG_PCI1_66 0x00200000 +#define TX4938_CCFG_DIVMODE_MASK 0x001e0000 +#define TX4938_CCFG_DIVMODE_2 (0x4 << 17) +#define TX4938_CCFG_DIVMODE_2_5 (0xf << 17) +#define TX4938_CCFG_DIVMODE_3 (0x5 << 17) +#define TX4938_CCFG_DIVMODE_4 (0x6 << 17) +#define TX4938_CCFG_DIVMODE_4_5 (0xd << 17) +#define TX4938_CCFG_DIVMODE_8 (0x0 << 17) +#define TX4938_CCFG_DIVMODE_10 (0xb << 17) +#define TX4938_CCFG_DIVMODE_12 (0x1 << 17) +#define TX4938_CCFG_DIVMODE_16 (0x2 << 17) +#define TX4938_CCFG_DIVMODE_18 (0x9 << 17) +#define TX4938_CCFG_BEOW 0x00010000 +#define TX4938_CCFG_WR 0x00008000 +#define TX4938_CCFG_TOE 0x00004000 +#define TX4938_CCFG_PCIXARB 0x00002000 +#define TX4938_CCFG_PCIDIVMODE_MASK 0x00001c00 +#define TX4938_CCFG_PCIDIVMODE_4 (0x1 << 10) +#define TX4938_CCFG_PCIDIVMODE_4_5 (0x3 << 10) +#define TX4938_CCFG_PCIDIVMODE_5 (0x5 << 10) +#define TX4938_CCFG_PCIDIVMODE_5_5 (0x7 << 10) +#define TX4938_CCFG_PCIDIVMODE_8 (0x0 << 10) +#define TX4938_CCFG_PCIDIVMODE_9 (0x2 << 10) +#define TX4938_CCFG_PCIDIVMODE_10 (0x4 << 10) +#define TX4938_CCFG_PCIDIVMODE_11 (0x6 << 10) +#define TX4938_CCFG_PCI1DMD 0x00000100 +#define TX4938_CCFG_SYSSP_MASK 0x000000c0 +#define TX4938_CCFG_ENDIAN 0x00000004 +#define TX4938_CCFG_HALT 0x00000002 +#define TX4938_CCFG_ACEHOLD 0x00000001 + +/* PCFG : Pin Configuration */ +#define TX4938_PCFG_ETH0_SEL _CONST64(0x8000000000000000) +#define TX4938_PCFG_ETH1_SEL _CONST64(0x4000000000000000) +#define TX4938_PCFG_ATA_SEL _CONST64(0x2000000000000000) +#define TX4938_PCFG_ISA_SEL _CONST64(0x1000000000000000) +#define TX4938_PCFG_SPI_SEL _CONST64(0x0800000000000000) +#define TX4938_PCFG_NDF_SEL _CONST64(0x0400000000000000) +#define TX4938_PCFG_SDCLKDLY_MASK 0x30000000 +#define TX4938_PCFG_SDCLKDLY(d) ((d)<<28) +#define TX4938_PCFG_SYSCLKEN 0x08000000 +#define TX4938_PCFG_SDCLKEN_ALL 0x07800000 +#define TX4938_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) +#define TX4938_PCFG_PCICLKEN_ALL 0x003f0000 +#define TX4938_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) +#define TX4938_PCFG_SEL2 0x00000200 +#define TX4938_PCFG_SEL1 0x00000100 +#define TX4938_PCFG_DMASEL_ALL 0x0000000f +#define TX4938_PCFG_DMASEL0_DRQ0 0x00000000 +#define TX4938_PCFG_DMASEL0_SIO1 0x00000001 +#define TX4938_PCFG_DMASEL1_DRQ1 0x00000000 +#define TX4938_PCFG_DMASEL1_SIO1 0x00000002 +#define TX4938_PCFG_DMASEL2_DRQ2 0x00000000 +#define TX4938_PCFG_DMASEL2_SIO0 0x00000004 +#define TX4938_PCFG_DMASEL3_DRQ3 0x00000000 +#define TX4938_PCFG_DMASEL3_SIO0 0x00000008 + +/* CLKCTR : Clock Control */ +#define TX4938_CLKCTR_NDFCKD _CONST64(0x0001000000000000) +#define TX4938_CLKCTR_NDFRST _CONST64(0x0000000100000000) +#define TX4938_CLKCTR_ETH1CKD 0x80000000 +#define TX4938_CLKCTR_ETH0CKD 0x40000000 +#define TX4938_CLKCTR_SPICKD 0x20000000 +#define TX4938_CLKCTR_SRAMCKD 0x10000000 +#define TX4938_CLKCTR_PCIC1CKD 0x08000000 +#define TX4938_CLKCTR_DMA1CKD 0x04000000 +#define TX4938_CLKCTR_ACLCKD 0x02000000 +#define TX4938_CLKCTR_PIOCKD 0x01000000 +#define TX4938_CLKCTR_DMACKD 0x00800000 +#define TX4938_CLKCTR_PCICKD 0x00400000 +#define TX4938_CLKCTR_TM0CKD 0x00100000 +#define TX4938_CLKCTR_TM1CKD 0x00080000 +#define TX4938_CLKCTR_TM2CKD 0x00040000 +#define TX4938_CLKCTR_SIO0CKD 0x00020000 +#define TX4938_CLKCTR_SIO1CKD 0x00010000 +#define TX4938_CLKCTR_ETH1RST 0x00008000 +#define TX4938_CLKCTR_ETH0RST 0x00004000 +#define TX4938_CLKCTR_SPIRST 0x00002000 +#define TX4938_CLKCTR_SRAMRST 0x00001000 +#define TX4938_CLKCTR_PCIC1RST 0x00000800 +#define TX4938_CLKCTR_DMA1RST 0x00000400 +#define TX4938_CLKCTR_ACLRST 0x00000200 +#define TX4938_CLKCTR_PIORST 0x00000100 +#define TX4938_CLKCTR_DMARST 0x00000080 +#define TX4938_CLKCTR_PCIRST 0x00000040 +#define TX4938_CLKCTR_TM0RST 0x00000010 +#define TX4938_CLKCTR_TM1RST 0x00000008 +#define TX4938_CLKCTR_TM2RST 0x00000004 +#define TX4938_CLKCTR_SIO0RST 0x00000002 +#define TX4938_CLKCTR_SIO1RST 0x00000001 + +/* bits for G2PSTATUS/G2PMASK */ +#define TX4938_PCIC_G2PSTATUS_ALL 0x00000003 +#define TX4938_PCIC_G2PSTATUS_TTOE 0x00000002 +#define TX4938_PCIC_G2PSTATUS_RTOE 0x00000001 + +/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */ +#define TX4938_PCIC_PCISTATUS_ALL 0x0000f900 + +/* bits for PBACFG */ +#define TX4938_PCIC_PBACFG_FIXPA 0x00000008 +#define TX4938_PCIC_PBACFG_RPBA 0x00000004 +#define TX4938_PCIC_PBACFG_PBAEN 0x00000002 +#define TX4938_PCIC_PBACFG_BMCEN 0x00000001 + +/* bits for G2PMnGBASE */ +#define TX4938_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000) +#define TX4938_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000) + +/* bits for G2PIOGBASE */ +#define TX4938_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000) +#define TX4938_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000) + +/* bits for PCICSTATUS/PCICMASK */ +#define TX4938_PCIC_PCICSTATUS_ALL 0x000007b8 +#define TX4938_PCIC_PCICSTATUS_PME 0x00000400 +#define TX4938_PCIC_PCICSTATUS_TLB 0x00000200 +#define TX4938_PCIC_PCICSTATUS_NIB 0x00000100 +#define TX4938_PCIC_PCICSTATUS_ZIB 0x00000080 +#define TX4938_PCIC_PCICSTATUS_PERR 0x00000020 +#define TX4938_PCIC_PCICSTATUS_SERR 0x00000010 +#define TX4938_PCIC_PCICSTATUS_GBE 0x00000008 +#define TX4938_PCIC_PCICSTATUS_IWB 0x00000002 +#define TX4938_PCIC_PCICSTATUS_E2PDONE 0x00000001 + +/* bits for PCICCFG */ +#define TX4938_PCIC_PCICCFG_GBWC_MASK 0x0fff0000 +#define TX4938_PCIC_PCICCFG_HRST 0x00000800 +#define TX4938_PCIC_PCICCFG_SRST 0x00000400 +#define TX4938_PCIC_PCICCFG_IRBER 0x00000200 +#define TX4938_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch)) +#define TX4938_PCIC_PCICCFG_G2PM0EN 0x00000100 +#define TX4938_PCIC_PCICCFG_G2PM1EN 0x00000080 +#define TX4938_PCIC_PCICCFG_G2PM2EN 0x00000040 +#define TX4938_PCIC_PCICCFG_G2PIOEN 0x00000020 +#define TX4938_PCIC_PCICCFG_TCAR 0x00000010 +#define TX4938_PCIC_PCICCFG_ICAEN 0x00000008 + +/* bits for P2GMnGBASE */ +#define TX4938_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000) +#define TX4938_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000) +#define TX4938_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000) + +/* bits for P2GIOGBASE */ +#define TX4938_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000) +#define TX4938_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000) +#define TX4938_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000) + +#define TX4938_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) +#define TX4938_PCIC_MAX_DEVNU TX4938_PCIC_IDSEL_AD_TO_SLOT(32) + +/* bits for PDMCFG */ +#define TX4938_PCIC_PDMCFG_RSTFIFO 0x00200000 +#define TX4938_PCIC_PDMCFG_EXFER 0x00100000 +#define TX4938_PCIC_PDMCFG_REQDLY_MASK 0x00003800 +#define TX4938_PCIC_PDMCFG_REQDLY_NONE (0 << 11) +#define TX4938_PCIC_PDMCFG_REQDLY_16 (1 << 11) +#define TX4938_PCIC_PDMCFG_REQDLY_32 (2 << 11) +#define TX4938_PCIC_PDMCFG_REQDLY_64 (3 << 11) +#define TX4938_PCIC_PDMCFG_REQDLY_128 (4 << 11) +#define TX4938_PCIC_PDMCFG_REQDLY_256 (5 << 11) +#define TX4938_PCIC_PDMCFG_REQDLY_512 (6 << 11) +#define TX4938_PCIC_PDMCFG_REQDLY_1024 (7 << 11) +#define TX4938_PCIC_PDMCFG_ERRIE 0x00000400 +#define TX4938_PCIC_PDMCFG_NCCMPIE 0x00000200 +#define TX4938_PCIC_PDMCFG_NTCMPIE 0x00000100 +#define TX4938_PCIC_PDMCFG_CHNEN 0x00000080 +#define TX4938_PCIC_PDMCFG_XFRACT 0x00000040 +#define TX4938_PCIC_PDMCFG_BSWAP 0x00000020 +#define TX4938_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c +#define TX4938_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000 +#define TX4938_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004 +#define TX4938_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008 +#define TX4938_PCIC_PDMCFG_XFRDIRC 0x00000002 +#define TX4938_PCIC_PDMCFG_CHRST 0x00000001 + +/* bits for PDMSTS */ +#define TX4938_PCIC_PDMSTS_REQCNT_MASK 0x3f000000 +#define TX4938_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000 +#define TX4938_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000 +#define TX4938_PCIC_PDMSTS_FIFORP_MASK 0x00030000 +#define TX4938_PCIC_PDMSTS_ERRINT 0x00000800 +#define TX4938_PCIC_PDMSTS_DONEINT 0x00000400 +#define TX4938_PCIC_PDMSTS_CHNEN 0x00000200 +#define TX4938_PCIC_PDMSTS_XFRACT 0x00000100 +#define TX4938_PCIC_PDMSTS_ACCMP 0x00000080 +#define TX4938_PCIC_PDMSTS_NCCMP 0x00000040 +#define TX4938_PCIC_PDMSTS_NTCMP 0x00000020 +#define TX4938_PCIC_PDMSTS_CFGERR 0x00000008 +#define TX4938_PCIC_PDMSTS_PCIERR 0x00000004 +#define TX4938_PCIC_PDMSTS_CHNERR 0x00000002 +#define TX4938_PCIC_PDMSTS_DATAERR 0x00000001 +#define TX4938_PCIC_PDMSTS_ALL_CMP 0x000000e0 +#define TX4938_PCIC_PDMSTS_ALL_ERR 0x0000000f + +/* + * DMA + */ +/* bits for MCR */ +#define TX4938_DMA_MCR_EIS(ch) (0x10000000<<(ch)) +#define TX4938_DMA_MCR_DIS(ch) (0x01000000<<(ch)) +#define TX4938_DMA_MCR_RSFIF 0x00000080 +#define TX4938_DMA_MCR_FIFUM(ch) (0x00000008<<(ch)) +#define TX4938_DMA_MCR_RPRT 0x00000002 +#define TX4938_DMA_MCR_MSTEN 0x00000001 + +/* bits for CCRn */ +#define TX4938_DMA_CCR_IMMCHN 0x20000000 +#define TX4938_DMA_CCR_USEXFSZ 0x10000000 +#define TX4938_DMA_CCR_LE 0x08000000 +#define TX4938_DMA_CCR_DBINH 0x04000000 +#define TX4938_DMA_CCR_SBINH 0x02000000 +#define TX4938_DMA_CCR_CHRST 0x01000000 +#define TX4938_DMA_CCR_RVBYTE 0x00800000 +#define TX4938_DMA_CCR_ACKPOL 0x00400000 +#define TX4938_DMA_CCR_REQPL 0x00200000 +#define TX4938_DMA_CCR_EGREQ 0x00100000 +#define TX4938_DMA_CCR_CHDN 0x00080000 +#define TX4938_DMA_CCR_DNCTL 0x00060000 +#define TX4938_DMA_CCR_EXTRQ 0x00010000 +#define TX4938_DMA_CCR_INTRQD 0x0000e000 +#define TX4938_DMA_CCR_INTENE 0x00001000 +#define TX4938_DMA_CCR_INTENC 0x00000800 +#define TX4938_DMA_CCR_INTENT 0x00000400 +#define TX4938_DMA_CCR_CHNEN 0x00000200 +#define TX4938_DMA_CCR_XFACT 0x00000100 +#define TX4938_DMA_CCR_SMPCHN 0x00000020 +#define TX4938_DMA_CCR_XFSZ(order) (((order) << 2) & 0x0000001c) +#define TX4938_DMA_CCR_XFSZ_1W TX4938_DMA_CCR_XFSZ(2) +#define TX4938_DMA_CCR_XFSZ_2W TX4938_DMA_CCR_XFSZ(3) +#define TX4938_DMA_CCR_XFSZ_4W TX4938_DMA_CCR_XFSZ(4) +#define TX4938_DMA_CCR_XFSZ_8W TX4938_DMA_CCR_XFSZ(5) +#define TX4938_DMA_CCR_XFSZ_16W TX4938_DMA_CCR_XFSZ(6) +#define TX4938_DMA_CCR_XFSZ_32W TX4938_DMA_CCR_XFSZ(7) +#define TX4938_DMA_CCR_MEMIO 0x00000002 +#define TX4938_DMA_CCR_SNGAD 0x00000001 + +/* bits for CSRn */ +#define TX4938_DMA_CSR_CHNEN 0x00000400 +#define TX4938_DMA_CSR_STLXFER 0x00000200 +#define TX4938_DMA_CSR_CHNACT 0x00000100 +#define TX4938_DMA_CSR_ABCHC 0x00000080 +#define TX4938_DMA_CSR_NCHNC 0x00000040 +#define TX4938_DMA_CSR_NTRNFC 0x00000020 +#define TX4938_DMA_CSR_EXTDN 0x00000010 +#define TX4938_DMA_CSR_CFERR 0x00000008 +#define TX4938_DMA_CSR_CHERR 0x00000004 +#define TX4938_DMA_CSR_DESERR 0x00000002 +#define TX4938_DMA_CSR_SORERR 0x00000001 + +#ifndef __ASSEMBLY__ + +#define tx4938_sdramcptr ((struct tx4938_sdramc_reg *)TX4938_SDRAMC_REG) +#define tx4938_ebuscptr ((struct tx4938_ebusc_reg *)TX4938_EBUSC_REG) +#define tx4938_dmaptr(ch) ((struct tx4938_dma_reg *)TX4938_DMA_REG(ch)) +#define tx4938_ndfmcptr ((struct tx4938_ndfmc_reg *)TX4938_NDFMC_REG) +#define tx4938_pcicptr ((struct tx4938_pcic_reg *)TX4938_PCIC_REG) +#define tx4938_pcic1ptr ((struct tx4938_pcic_reg *)TX4938_PCIC1_REG) +#define tx4938_ccfgptr ((struct tx4938_ccfg_reg *)TX4938_CCFG_REG) +#define tx4938_sioptr(ch) ((struct tx4938_sio_reg *)TX4938_SIO_REG(ch)) +#define tx4938_pioptr ((struct txx9_pio_reg __iomem *)TX4938_PIO_REG) +#define tx4938_aclcptr ((struct tx4938_aclc_reg *)TX4938_ACLC_REG) +#define tx4938_spiptr ((struct tx4938_spi_reg *)TX4938_SPI_REG) +#define tx4938_sramcptr ((struct tx4938_sramc_reg *)TX4938_SRAMC_REG) + + +#define TX4938_REV_MAJ_MIN() ((unsigned long)tx4938_ccfgptr->crir & 0x00ff) +#define TX4938_REV_PCODE() ((unsigned long)tx4938_ccfgptr->crir >> 16) + +#define TX4938_SDRAMC_BA(ch) ((tx4938_sdramcptr->cr[ch] >> 49) << 21) +#define TX4938_SDRAMC_SIZE(ch) (((tx4938_sdramcptr->cr[ch] >> 33) + 1) << 21) + +#define TX4938_EBUSC_BA(ch) ((tx4938_ebuscptr->cr[ch] >> 48) << 20) +#define TX4938_EBUSC_SIZE(ch) \ + (0x00100000 << ((unsigned long)(tx4938_ebuscptr->cr[ch] >> 8) & 0xf)) + + +#endif /* !__ASSEMBLY__ */ + +#endif diff --git a/include/asm-mips/txx9/txx927.h b/include/asm-mips/txx9/txx927.h new file mode 100644 index 000000000000..97dd7ad1a890 --- /dev/null +++ b/include/asm-mips/txx9/txx927.h @@ -0,0 +1,121 @@ +/* + * Common definitions for TX3927/TX4927 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2000 Toshiba Corporation + */ +#ifndef __ASM_TXX9_TXX927_H +#define __ASM_TXX9_TXX927_H + +struct txx927_sio_reg { + volatile unsigned long lcr; + volatile unsigned long dicr; + volatile unsigned long disr; + volatile unsigned long cisr; + volatile unsigned long fcr; + volatile unsigned long flcr; + volatile unsigned long bgr; + volatile unsigned long tfifo; + volatile unsigned long rfifo; +}; + +/* + * SIO + */ +/* SILCR : Line Control */ +#define TXx927_SILCR_SCS_MASK 0x00000060 +#define TXx927_SILCR_SCS_IMCLK 0x00000000 +#define TXx927_SILCR_SCS_IMCLK_BG 0x00000020 +#define TXx927_SILCR_SCS_SCLK 0x00000040 +#define TXx927_SILCR_SCS_SCLK_BG 0x00000060 +#define TXx927_SILCR_UEPS 0x00000010 +#define TXx927_SILCR_UPEN 0x00000008 +#define TXx927_SILCR_USBL_MASK 0x00000004 +#define TXx927_SILCR_USBL_1BIT 0x00000004 +#define TXx927_SILCR_USBL_2BIT 0x00000000 +#define TXx927_SILCR_UMODE_MASK 0x00000003 +#define TXx927_SILCR_UMODE_8BIT 0x00000000 +#define TXx927_SILCR_UMODE_7BIT 0x00000001 + +/* SIDICR : DMA/Int. Control */ +#define TXx927_SIDICR_TDE 0x00008000 +#define TXx927_SIDICR_RDE 0x00004000 +#define TXx927_SIDICR_TIE 0x00002000 +#define TXx927_SIDICR_RIE 0x00001000 +#define TXx927_SIDICR_SPIE 0x00000800 +#define TXx927_SIDICR_CTSAC 0x00000600 +#define TXx927_SIDICR_STIE_MASK 0x0000003f +#define TXx927_SIDICR_STIE_OERS 0x00000020 +#define TXx927_SIDICR_STIE_CTSS 0x00000010 +#define TXx927_SIDICR_STIE_RBRKD 0x00000008 +#define TXx927_SIDICR_STIE_TRDY 0x00000004 +#define TXx927_SIDICR_STIE_TXALS 0x00000002 +#define TXx927_SIDICR_STIE_UBRKD 0x00000001 + +/* SIDISR : DMA/Int. Status */ +#define TXx927_SIDISR_UBRK 0x00008000 +#define TXx927_SIDISR_UVALID 0x00004000 +#define TXx927_SIDISR_UFER 0x00002000 +#define TXx927_SIDISR_UPER 0x00001000 +#define TXx927_SIDISR_UOER 0x00000800 +#define TXx927_SIDISR_ERI 0x00000400 +#define TXx927_SIDISR_TOUT 0x00000200 +#define TXx927_SIDISR_TDIS 0x00000100 +#define TXx927_SIDISR_RDIS 0x00000080 +#define TXx927_SIDISR_STIS 0x00000040 +#define TXx927_SIDISR_RFDN_MASK 0x0000001f + +/* SICISR : Change Int. Status */ +#define TXx927_SICISR_OERS 0x00000020 +#define TXx927_SICISR_CTSS 0x00000010 +#define TXx927_SICISR_RBRKD 0x00000008 +#define TXx927_SICISR_TRDY 0x00000004 +#define TXx927_SICISR_TXALS 0x00000002 +#define TXx927_SICISR_UBRKD 0x00000001 + +/* SIFCR : FIFO Control */ +#define TXx927_SIFCR_SWRST 0x00008000 +#define TXx927_SIFCR_RDIL_MASK 0x00000180 +#define TXx927_SIFCR_RDIL_1 0x00000000 +#define TXx927_SIFCR_RDIL_4 0x00000080 +#define TXx927_SIFCR_RDIL_8 0x00000100 +#define TXx927_SIFCR_RDIL_12 0x00000180 +#define TXx927_SIFCR_RDIL_MAX 0x00000180 +#define TXx927_SIFCR_TDIL_MASK 0x00000018 +#define TXx927_SIFCR_TDIL_MASK 0x00000018 +#define TXx927_SIFCR_TDIL_1 0x00000000 +#define TXx927_SIFCR_TDIL_4 0x00000001 +#define TXx927_SIFCR_TDIL_8 0x00000010 +#define TXx927_SIFCR_TDIL_MAX 0x00000010 +#define TXx927_SIFCR_TFRST 0x00000004 +#define TXx927_SIFCR_RFRST 0x00000002 +#define TXx927_SIFCR_FRSTE 0x00000001 +#define TXx927_SIO_TX_FIFO 8 +#define TXx927_SIO_RX_FIFO 16 + +/* SIFLCR : Flow Control */ +#define TXx927_SIFLCR_RCS 0x00001000 +#define TXx927_SIFLCR_TES 0x00000800 +#define TXx927_SIFLCR_RTSSC 0x00000200 +#define TXx927_SIFLCR_RSDE 0x00000100 +#define TXx927_SIFLCR_TSDE 0x00000080 +#define TXx927_SIFLCR_RTSTL_MASK 0x0000001e +#define TXx927_SIFLCR_RTSTL_MAX 0x0000001e +#define TXx927_SIFLCR_TBRK 0x00000001 + +/* SIBGR : Baudrate Control */ +#define TXx927_SIBGR_BCLK_MASK 0x00000300 +#define TXx927_SIBGR_BCLK_T0 0x00000000 +#define TXx927_SIBGR_BCLK_T2 0x00000100 +#define TXx927_SIBGR_BCLK_T4 0x00000200 +#define TXx927_SIBGR_BCLK_T6 0x00000300 +#define TXx927_SIBGR_BRD_MASK 0x000000ff + +/* + * PIO + */ + +#endif /* __ASM_TXX9_TXX927_H */ -- cgit v1.2.3 From 89d63fe179520b11f54de1f26755b7444c79e73a Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 11 Jul 2008 00:33:08 +0900 Subject: [MIPS] TXx9: Reorganize PCI code Split out PCIC dependent code and SoC dependent code from board dependent code. Now TX4927 PCIC code is independent from TX4927/TX4938 SoC code. Also fix some build problems on CONFIG_PCI=n. As a bonus, "FPCIB0 Backplane Support" is available for all TX39/TX49 boards and PCI66 support is available for all TX49 boards. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 3 +- arch/mips/pci/Makefile | 8 +- arch/mips/pci/fixup-jmr3927.c | 25 +- arch/mips/pci/fixup-rbtx4927.c | 112 ++----- arch/mips/pci/fixup-rbtx4938.c | 52 +-- arch/mips/pci/ops-tx3927.c | 87 ++++- arch/mips/pci/ops-tx4927.c | 514 +++++++++++++++++++--------- arch/mips/pci/ops-tx4938.c | 214 ------------ arch/mips/pci/pci-jmr3927.c | 58 ---- arch/mips/pci/pci-tx4927.c | 83 +++++ arch/mips/pci/pci-tx4938.c | 134 ++++++++ arch/mips/txx9/Kconfig | 11 +- arch/mips/txx9/generic/Makefile | 2 + arch/mips/txx9/generic/pci.c | 377 +++++++++++++++++++++ arch/mips/txx9/generic/setup.c | 51 +++ arch/mips/txx9/jmr3927/irq.c | 2 + arch/mips/txx9/jmr3927/setup.c | 108 ++---- arch/mips/txx9/rbtx4927/irq.c | 20 +- arch/mips/txx9/rbtx4927/setup.c | 499 +++++++-------------------- arch/mips/txx9/rbtx4938/setup.c | 667 ++++++------------------------------- include/asm-mips/txx9/generic.h | 23 ++ include/asm-mips/txx9/pci.h | 36 ++ include/asm-mips/txx9/rbtx4927.h | 29 +- include/asm-mips/txx9/tx3927.h | 4 + include/asm-mips/txx9/tx4927.h | 318 ++++++++---------- include/asm-mips/txx9/tx4927pcic.h | 199 +++++++++++ include/asm-mips/txx9/tx4938.h | 226 ++----------- 27 files changed, 1851 insertions(+), 2011 deletions(-) delete mode 100644 arch/mips/pci/ops-tx4938.c delete mode 100644 arch/mips/pci/pci-jmr3927.c create mode 100644 arch/mips/pci/pci-tx4927.c create mode 100644 arch/mips/pci/pci-tx4938.c create mode 100644 arch/mips/txx9/generic/pci.c create mode 100644 arch/mips/txx9/generic/setup.c create mode 100644 include/asm-mips/txx9/generic.h create mode 100644 include/asm-mips/txx9/pci.h create mode 100644 include/asm-mips/txx9/tx4927pcic.h diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 3202960f7597..2ea6fff88811 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -575,7 +575,7 @@ config TOSHIBA_RBTX4927 select HW_HAS_PCI select IRQ_CPU select IRQ_TXX9 - select I8259 if TOSHIBA_FPCIB0 + select PCI_TX4927 select SWAP_IO_SPACE select SYS_HAS_CPU_TX49XX select SYS_SUPPORTS_32BIT_KERNEL @@ -598,6 +598,7 @@ config TOSHIBA_RBTX4938 select HW_HAS_PCI select IRQ_CPU select IRQ_TXX9 + select PCI_TX4927 select SWAP_IO_SPACE select SYS_HAS_CPU_TX49XX select SYS_SUPPORTS_32BIT_KERNEL diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 4608e43de28c..908764878ac8 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -15,6 +15,8 @@ obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o +obj-$(CONFIG_PCI_TX3927) += ops-tx3927.o +obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o # # These are still pretty much in the old state, watch, go blind. @@ -41,9 +43,9 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o -obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o pci-jmr3927.o -obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o ops-tx4927.o -obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o ops-tx4938.o +obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o +obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o pci-tx4927.o pci-tx4938.o +obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o pci-tx4938.o obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c index 41dcd6a3aae5..d5edaf21e088 100644 --- a/arch/mips/pci/fixup-jmr3927.c +++ b/arch/mips/pci/fixup-jmr3927.c @@ -28,36 +28,31 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include -#include -#include - +#include #include int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq = pin; - /* SMSC SLC90E66 IDE uses irq 14, 15 (default) */ - if (dev->vendor == PCI_VENDOR_ID_EFAR && - dev->device == PCI_DEVICE_ID_EFAR_SLC90E66_1) - return irq; /* IRQ rotation (PICMG) */ irq--; /* 0-3 */ - if (dev->bus->parent == NULL && - slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(23)) { + if (slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(23)) { /* PCI CardSlot (IDSEL=A23, DevNu=12) */ /* PCIA => PCIC (IDSEL=A23) */ /* NOTE: JMR3927 JP1 must be set to OPEN */ irq = (irq + 2) % 4; - } else if (dev->bus->parent == NULL && - slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(22)) { + } else if (slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(22)) { /* PCI CardSlot (IDSEL=A22, DevNu=11) */ /* PCIA => PCIA (IDSEL=A22) */ /* NOTE: JMR3927 JP1 must be set to OPEN */ irq = (irq + 0) % 4; } else { /* PCI Backplane */ - irq = (irq + 3 + slot) % 4; + if (txx9_pci_option & TXX9_PCI_OPT_PICMG) + irq = (irq + 33 - slot) % 4; + else + irq = (irq + 3 + slot) % 4; } irq++; /* 1-4 */ @@ -66,15 +61,13 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) irq = JMR3927_IRQ_IOC_PCIA; break; case 2: - // wrong for backplane irq = JMR3927_IRQ_IOC_PCIB; - irq = JMR3927_IRQ_IOC_PCID; + irq = JMR3927_IRQ_IOC_PCIB; break; case 3: irq = JMR3927_IRQ_IOC_PCIC; break; case 4: - // wrong for backplane irq = JMR3927_IRQ_IOC_PCID; - irq = JMR3927_IRQ_IOC_PCIB; + irq = JMR3927_IRQ_IOC_PCID; break; } diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c index 26013badfe1f..abab4852d158 100644 --- a/arch/mips/pci/fixup-rbtx4927.c +++ b/arch/mips/pci/fixup-rbtx4927.c @@ -33,102 +33,42 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include -#include -#include -#include +#include +#include -#include - -#undef DEBUG -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -/* look up table for backplane pci irq for slots 17-20 by pin # */ -static unsigned char backplane_pci_irq[4][4] = { - /* PJ6 SLOT: 17, PIN: 1 */ {TX4927_IRQ_IOC_PCIA, - /* PJ6 SLOT: 17, PIN: 2 */ - TX4927_IRQ_IOC_PCIB, - /* PJ6 SLOT: 17, PIN: 3 */ - TX4927_IRQ_IOC_PCIC, - /* PJ6 SLOT: 17, PIN: 4 */ - TX4927_IRQ_IOC_PCID}, - /* SB SLOT: 18, PIN: 1 */ {TX4927_IRQ_IOC_PCIB, - /* SB SLOT: 18, PIN: 2 */ - TX4927_IRQ_IOC_PCIC, - /* SB SLOT: 18, PIN: 3 */ - TX4927_IRQ_IOC_PCID, - /* SB SLOT: 18, PIN: 4 */ - TX4927_IRQ_IOC_PCIA}, - /* PJ5 SLOT: 19, PIN: 1 */ {TX4927_IRQ_IOC_PCIC, - /* PJ5 SLOT: 19, PIN: 2 */ - TX4927_IRQ_IOC_PCID, - /* PJ5 SLOT: 19, PIN: 3 */ - TX4927_IRQ_IOC_PCIA, - /* PJ5 SLOT: 19, PIN: 4 */ - TX4927_IRQ_IOC_PCIB}, - /* PJ4 SLOT: 20, PIN: 1 */ {TX4927_IRQ_IOC_PCID, - /* PJ4 SLOT: 20, PIN: 2 */ - TX4927_IRQ_IOC_PCIA, - /* PJ4 SLOT: 20, PIN: 3 */ - TX4927_IRQ_IOC_PCIB, - /* PJ4 SLOT: 20, PIN: 4 */ - TX4927_IRQ_IOC_PCIC} -}; - -static int pci_get_irq(const struct pci_dev *dev, int pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq = pin; - DBG("pci_get_irq: pin is %d\n", pin); /* IRQ rotation */ irq--; /* 0-3 */ - if (dev->bus->parent == NULL && - PCI_SLOT(dev->devfn) == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) { - printk("Onboard PCI_SLOT(dev->devfn) is %d\n", - PCI_SLOT(dev->devfn)); - /* IDSEL=A23 is tx4927 onboard pci slot */ - irq = (irq + PCI_SLOT(dev->devfn)) % 4; - irq++; /* 1-4 */ - DBG("irq is now %d\n", irq); - - switch (irq) { - case 1: - irq = TX4927_IRQ_IOC_PCIA; - break; - case 2: - irq = TX4927_IRQ_IOC_PCIB; - break; - case 3: - irq = TX4927_IRQ_IOC_PCIC; - break; - case 4: - irq = TX4927_IRQ_IOC_PCID; - break; - } + if (slot == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) { + /* PCI CardSlot (IDSEL=A23) */ + /* PCIA => PCIA */ + irq = (irq + 0 + slot) % 4; } else { /* PCI Backplane */ - DBG("PCI Backplane PCI_SLOT(dev->devfn) is %d\n", - PCI_SLOT(dev->devfn)); - irq = backplane_pci_irq[PCI_SLOT(dev->devfn) - 17][irq]; + if (txx9_pci_option & TXX9_PCI_OPT_PICMG) + irq = (irq + 33 - slot) % 4; + else + irq = (irq + 3 + slot) % 4; } - DBG("assigned irq %d\n", irq); - return irq; -} - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - unsigned char irq; - - printk("PCI Setup for pin %d \n", pin); - - if (dev->device == 0x9130) /* IDE */ - irq = 14; - else - irq = pci_get_irq(dev, pin); + irq++; /* 1-4 */ + switch (irq) { + case 1: + irq = RBTX4927_IRQ_IOC_PCIA; + break; + case 2: + irq = RBTX4927_IRQ_IOC_PCIB; + break; + case 3: + irq = RBTX4927_IRQ_IOC_PCIC; + break; + case 4: + irq = RBTX4927_IRQ_IOC_PCID; + break; + } return irq; } diff --git a/arch/mips/pci/fixup-rbtx4938.c b/arch/mips/pci/fixup-rbtx4938.c index 64d4510c0265..39c995830384 100644 --- a/arch/mips/pci/fixup-rbtx4938.c +++ b/arch/mips/pci/fixup-rbtx4938.c @@ -10,45 +10,28 @@ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) */ #include -#include -#include -#include - +#include #include -extern struct pci_controller tx4938_pci_controller[]; - -static int pci_get_irq(const struct pci_dev *dev, int pin) +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { - int irq = pin; - u8 slot = PCI_SLOT(dev->devfn); - struct pci_controller *controller = (struct pci_controller *)dev->sysdata; - - if (controller == &tx4938_pci_controller[1]) { - /* TX4938 PCIC1 */ - switch (slot) { - case TX4938_PCIC_IDSEL_AD_TO_SLOT(31): - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL) - return RBTX4938_IRQ_IRC + TX4938_IR_ETH0; - break; - case TX4938_PCIC_IDSEL_AD_TO_SLOT(30): - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL) - return RBTX4938_IRQ_IRC + TX4938_IR_ETH1; - break; - } - return 0; - } + int irq = tx4938_pcic1_map_irq(dev, slot); + if (irq >= 0) + return irq; + irq = pin; /* IRQ rotation */ irq--; /* 0-3 */ - if (dev->bus->parent == NULL && - (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) { + if (slot == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) { /* PCI CardSlot (IDSEL=A23) */ /* PCIA => PCIA (IDSEL=A23) */ irq = (irq + 0 + slot) % 4; } else { /* PCI Backplane */ - irq = (irq + 33 - slot) % 4; + if (txx9_pci_option & TXX9_PCI_OPT_PICMG) + irq = (irq + 33 - slot) % 4; + else + irq = (irq + 3 + slot) % 4; } irq++; /* 1-4 */ @@ -69,19 +52,6 @@ static int pci_get_irq(const struct pci_dev *dev, int pin) return irq; } -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - unsigned char irq = 0; - - irq = pci_get_irq(dev, pin); - - printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n", - dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn), - PCI_FUNC(dev->devfn), irq); - - return irq; -} - /* * Do platform specific device initialization at pci_enable_device() time */ diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index 5d398f694682..8a17a39e5bf2 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -8,7 +8,7 @@ * * Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c * - * Define the pci_ops for JMR3927. + * Define the pci_ops for TX3927. * * Much of the code is derived from the original DDB5074 port by * Geert Uytterhoeven @@ -39,7 +39,7 @@ #include #include -#include +#include static inline int mkaddr(unsigned char bus, unsigned char dev_fn, unsigned char where) @@ -68,7 +68,7 @@ static inline int check_abort(void) return PCIBIOS_SUCCESSFUL; } -static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, +static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) { int ret; @@ -94,7 +94,7 @@ static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn, return check_abort(); } -static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, +static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { int ret; @@ -125,7 +125,80 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn, return check_abort(); } -struct pci_ops jmr3927_pci_ops = { - jmr3927_pci_read_config, - jmr3927_pci_write_config, +static struct pci_ops tx3927_pci_ops = { + .read = tx3927_pci_read_config, + .write = tx3927_pci_write_config, }; + +void __init tx3927_pcic_setup(struct pci_controller *channel, + unsigned long sdram_size, int extarb) +{ + unsigned long flags; + unsigned long io_base = + channel->io_resource->start + mips_io_port_base - IO_BASE; + unsigned long io_size = + channel->io_resource->end - channel->io_resource->start; + unsigned long io_pciaddr = + channel->io_resource->start - channel->io_offset; + unsigned long mem_base = + channel->mem_resource->start; + unsigned long mem_size = + channel->mem_resource->end - channel->mem_resource->start; + unsigned long mem_pciaddr = + channel->mem_resource->start - channel->mem_offset; + + printk(KERN_INFO "TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s", + tx3927_pcicptr->did, tx3927_pcicptr->vid, + tx3927_pcicptr->rid, + extarb ? "External" : "Internal"); + channel->pci_ops = &tx3927_pci_ops; + + local_irq_save(flags); + /* Disable External PCI Config. Access */ + tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD; +#ifdef __BIG_ENDIAN + tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE | + TX3927_PCIC_LBC_TIBSE | + TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE; +#endif + /* LB->PCI mappings */ + tx3927_pcicptr->iomas = ~(io_size - 1); + tx3927_pcicptr->ilbioma = io_base; + tx3927_pcicptr->ipbioma = io_pciaddr; + tx3927_pcicptr->mmas = ~(mem_size - 1); + tx3927_pcicptr->ilbmma = mem_base; + tx3927_pcicptr->ipbmma = mem_pciaddr; + /* PCI->LB mappings */ + tx3927_pcicptr->iobas = 0xffffffff; + tx3927_pcicptr->ioba = 0; + tx3927_pcicptr->tlbioma = 0; + tx3927_pcicptr->mbas = ~(sdram_size - 1); + tx3927_pcicptr->mba = 0; + tx3927_pcicptr->tlbmma = 0; + /* Enable Direct mapping Address Space Decoder */ + tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE; + + /* Clear All Local Bus Status */ + tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL; + /* Enable All Local Bus Interrupts */ + tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL; + /* Clear All PCI Status Error */ + tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL; + /* Enable All PCI Status Error Interrupts */ + tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL; + + /* PCIC Int => IRC IRQ10 */ + tx3927_pcicptr->il = TX3927_IR_PCI; + /* Target Control (per errata) */ + tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E; + + /* Enable Bus Arbiter */ + if (!extarb) + tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN; + + tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER | + PCI_COMMAND_MEMORY | + PCI_COMMAND_IO | + PCI_COMMAND_PARITY | PCI_COMMAND_SERR; + local_irq_restore(flags); +} diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index 54730eee451b..c6b49bccd274 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -1,206 +1,408 @@ /* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com + * Define the pci_ops for the PCIC on Toshiba TX4927, TX4938, etc. * - * Copyright (C) 2000-2001 Toshiba Corporation - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c - * - * Define the pci_ops for the Toshiba rbtx4927 - * - * Much of the code is derived from the original DDB5074 port by - * Geert Uytterhoeven - * - * Copyright 2004 MontaVista Software Inc. - * Author: Manish Lachwani (mlachwani@mvista.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. + * Based on linux/arch/mips/pci/ops-tx4938.c, + * linux/arch/mips/pci/fixup-rbtx4938.c, + * linux/arch/mips/txx9/rbtx4938/setup.c, + * and RBTX49xx patch from CELF patch archive. * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * 2003-2005 (c) MontaVista Software, Inc. + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. */ -#include -#include #include -#include -#include - -/* initialize in setup */ -struct resource pci_io_resource = { - .name = "TX4927 PCI IO SPACE", - .start = 0x1000, - .end = (0x1000 + (TX4927_PCIIO_SIZE)) - 1, - .flags = IORESOURCE_IO -}; +#include -/* initialize in setup */ -struct resource pci_mem_resource = { - .name = "TX4927 PCI MEM SPACE", - .start = TX4927_PCIMEM, - .end = TX4927_PCIMEM + TX4927_PCIMEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; +static struct { + struct pci_controller *channel; + struct tx4927_pcic_reg __iomem *pcicptr; +} pcicptrs[2]; /* TX4938 has 2 pcic */ + +static void __init set_tx4927_pcicptr(struct pci_controller *channel, + struct tx4927_pcic_reg __iomem *pcicptr) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) { + if (pcicptrs[i].channel == channel) { + pcicptrs[i].pcicptr = pcicptr; + return; + } + } + for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) { + if (!pcicptrs[i].channel) { + pcicptrs[i].channel = channel; + pcicptrs[i].pcicptr = pcicptr; + return; + } + } + BUG(); +} -static int mkaddr(int bus, int dev_fn, int where, int *flagsp) +struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr( + struct pci_controller *channel) { - if (bus > 0) { - /* Type 1 configuration */ - tx4927_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | - ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1; - } else { - if (dev_fn >= PCI_DEVFN(TX4927_PCIC_MAX_DEVNU, 0)) - return -1; + int i; - /* Type 0 configuration */ - tx4927_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | - ((dev_fn & 0xff) << 0x08) | (where & 0xfc); + for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) { + if (pcicptrs[i].channel == channel) + return pcicptrs[i].pcicptr; } + return NULL; +} + +static int mkaddr(struct pci_bus *bus, unsigned int devfn, int where, + struct tx4927_pcic_reg __iomem *pcicptr) +{ + if (bus->parent == NULL && + devfn >= PCI_DEVFN(TX4927_PCIC_MAX_DEVNU, 0)) + return -1; + __raw_writel(((bus->number & 0xff) << 0x10) + | ((devfn & 0xff) << 0x08) | (where & 0xfc) + | (bus->parent ? 1 : 0), + &pcicptr->g2pcfgadrs); /* clear M_ABORT and Disable M_ABORT Int. */ - tx4927_pcicptr->pcistatus = - (tx4927_pcicptr->pcistatus & 0x0000ffff) | - (PCI_STATUS_REC_MASTER_ABORT << 16); - tx4927_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT; + __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff) + | (PCI_STATUS_REC_MASTER_ABORT << 16), + &pcicptr->pcistatus); return 0; } -static int check_abort(int flags) +static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr) { int code = PCIBIOS_SUCCESSFUL; - if (tx4927_pcicptr-> - pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) { - tx4927_pcicptr->pcistatus = - (tx4927_pcicptr-> - pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT - << 16); - tx4927_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT; + + /* wait write cycle completion before checking error status */ + while (__raw_readl(&pcicptr->pcicstatus) & TX4927_PCIC_PCICSTATUS_IWB) + ; + if (__raw_readl(&pcicptr->pcistatus) + & (PCI_STATUS_REC_MASTER_ABORT << 16)) { + __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff) + | (PCI_STATUS_REC_MASTER_ABORT << 16), + &pcicptr->pcistatus); code = PCIBIOS_DEVICE_NOT_FOUND; } return code; } -static int tx4927_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 * val) +static u8 icd_readb(int offset, struct tx4927_pcic_reg __iomem *pcicptr) +{ +#ifdef __BIG_ENDIAN + offset ^= 3; +#endif + return __raw_readb((void __iomem *)&pcicptr->g2pcfgdata + offset); +} +static u16 icd_readw(int offset, struct tx4927_pcic_reg __iomem *pcicptr) +{ +#ifdef __BIG_ENDIAN + offset ^= 2; +#endif + return __raw_readw((void __iomem *)&pcicptr->g2pcfgdata + offset); +} +static u32 icd_readl(struct tx4927_pcic_reg __iomem *pcicptr) +{ + return __raw_readl(&pcicptr->g2pcfgdata); +} +static void icd_writeb(u8 val, int offset, + struct tx4927_pcic_reg __iomem *pcicptr) +{ +#ifdef __BIG_ENDIAN + offset ^= 3; +#endif + __raw_writeb(val, (void __iomem *)&pcicptr->g2pcfgdata + offset); +} +static void icd_writew(u16 val, int offset, + struct tx4927_pcic_reg __iomem *pcicptr) +{ +#ifdef __BIG_ENDIAN + offset ^= 2; +#endif + __raw_writew(val, (void __iomem *)&pcicptr->g2pcfgdata + offset); +} +static void icd_writel(u32 val, struct tx4927_pcic_reg __iomem *pcicptr) { - int flags, retval, dev, busno, func; + __raw_writel(val, &pcicptr->g2pcfgdata); +} - busno = bus->number; - dev = PCI_SLOT(devfn); - func = PCI_FUNC(devfn); +static struct tx4927_pcic_reg __iomem *pci_bus_to_pcicptr(struct pci_bus *bus) +{ + struct pci_controller *channel = bus->sysdata; + return get_tx4927_pcicptr(channel); +} - /* check if the bus is top-level */ - if (bus->parent != NULL) { - busno = bus->number; - } else { - busno = 0; - } +static int tx4927_pci_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(bus); - if (mkaddr(busno, devfn, where, &flags)) + if (mkaddr(bus, devfn, where, pcicptr)) { + *val = 0xffffffff; return -1; - + } switch (size) { case 1: - *val = *(volatile u8 *) ((unsigned long) & tx4927_pcicptr-> - g2pcfgdata | -#ifdef __LITTLE_ENDIAN - (where & 3)); -#else - ((where & 0x3) ^ 0x3)); -#endif + *val = icd_readb(where & 3, pcicptr); break; case 2: - *val = *(volatile u16 *) ((unsigned long) & tx4927_pcicptr-> - g2pcfgdata | -#ifdef __LITTLE_ENDIAN - (where & 3)); -#else - ((where & 0x3) ^ 0x2)); -#endif - break; - case 4: - *val = tx4927_pcicptr->g2pcfgdata; + *val = icd_readw(where & 3, pcicptr); break; + default: + *val = icd_readl(pcicptr); } + return check_abort(pcicptr); +} - retval = check_abort(flags); - if (retval == PCIBIOS_DEVICE_NOT_FOUND) - *val = 0xffffffff; +static int tx4927_pci_config_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(bus); - return retval; + if (mkaddr(bus, devfn, where, pcicptr)) + return -1; + switch (size) { + case 1: + icd_writeb(val, where & 3, pcicptr); + break; + case 2: + icd_writew(val, where & 3, pcicptr); + break; + default: + icd_writel(val, pcicptr); + } + return check_abort(pcicptr); } -static int tx4927_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) +static struct pci_ops tx4927_pci_ops = { + .read = tx4927_pci_config_read, + .write = tx4927_pci_config_write, +}; + +static struct { + u8 trdyto; + u8 retryto; + u16 gbwc; +} tx4927_pci_opts __devinitdata = { + .trdyto = 0, + .retryto = 0, + .gbwc = 0xfe0, /* 4064 GBUSCLK for CCFG.GTOT=0b11 */ +}; + +void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, + struct pci_controller *channel, int extarb) { - int flags, dev, busno, func; - busno = bus->number; - dev = PCI_SLOT(devfn); - func = PCI_FUNC(devfn); + int i; + unsigned long flags; - /* check if the bus is top-level */ - if (bus->parent != NULL) { - busno = bus->number; - } else { - busno = 0; - } + set_tx4927_pcicptr(channel, pcicptr); - if (mkaddr(busno, devfn, where, &flags)) - return -1; + if (!channel->pci_ops) + printk(KERN_INFO + "PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", + __raw_readl(&pcicptr->pciid) >> 16, + __raw_readl(&pcicptr->pciid) & 0xffff, + __raw_readl(&pcicptr->pciccrev) & 0xff, + extarb ? "External" : "Internal"); + channel->pci_ops = &tx4927_pci_ops; - switch (size) { - case 1: - *(volatile u8 *) ((unsigned long) & tx4927_pcicptr-> - g2pcfgdata | -#ifdef __LITTLE_ENDIAN - (where & 3)) = val; + local_irq_save(flags); + + /* Disable All Initiator Space */ + __raw_writel(__raw_readl(&pcicptr->pciccfg) + & ~(TX4927_PCIC_PCICCFG_G2PMEN(0) + | TX4927_PCIC_PCICCFG_G2PMEN(1) + | TX4927_PCIC_PCICCFG_G2PMEN(2) + | TX4927_PCIC_PCICCFG_G2PIOEN), + &pcicptr->pciccfg); + + /* GB->PCI mappings */ + __raw_writel((channel->io_resource->end - channel->io_resource->start) + >> 4, + &pcicptr->g2piomask); + ____raw_writeq((channel->io_resource->start + + channel->io_map_base - IO_BASE) | +#ifdef __BIG_ENDIAN + TX4927_PCIC_G2PIOGBASE_ECHG #else - ((where & 0x3) ^ 0x3)) = val; + TX4927_PCIC_G2PIOGBASE_BSDIS #endif - break; - - case 2: - *(volatile u16 *) ((unsigned long) & tx4927_pcicptr-> - g2pcfgdata | -#ifdef __LITTLE_ENDIAN - (where & 3)) = val; + , &pcicptr->g2piogbase); + ____raw_writeq(channel->io_resource->start - channel->io_offset, + &pcicptr->g2piopbase); + for (i = 0; i < 3; i++) { + __raw_writel(0, &pcicptr->g2pmmask[i]); + ____raw_writeq(0, &pcicptr->g2pmgbase[i]); + ____raw_writeq(0, &pcicptr->g2pmpbase[i]); + } + if (channel->mem_resource->end) { + __raw_writel((channel->mem_resource->end + - channel->mem_resource->start) >> 4, + &pcicptr->g2pmmask[0]); + ____raw_writeq(channel->mem_resource->start | +#ifdef __BIG_ENDIAN + TX4927_PCIC_G2PMnGBASE_ECHG #else - ((where & 0x3) ^ 0x2)) = val; + TX4927_PCIC_G2PMnGBASE_BSDIS #endif - break; - case 4: - tx4927_pcicptr->g2pcfgdata = val; - break; + , &pcicptr->g2pmgbase[0]); + ____raw_writeq(channel->mem_resource->start - + channel->mem_offset, + &pcicptr->g2pmpbase[0]); + } + /* PCI->GB mappings (I/O 256B) */ + __raw_writel(0, &pcicptr->p2giopbase); /* 256B */ + ____raw_writeq(0, &pcicptr->p2giogbase); + /* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */ + __raw_writel(0, &pcicptr->p2gm0plbase); + __raw_writel(0, &pcicptr->p2gm0pubase); + ____raw_writeq(TX4927_PCIC_P2GMnGBASE_TMEMEN | +#ifdef __BIG_ENDIAN + TX4927_PCIC_P2GMnGBASE_TECHG +#else + TX4927_PCIC_P2GMnGBASE_TBSDIS +#endif + , &pcicptr->p2gmgbase[0]); + /* PCI->GB mappings (MEM 16MB) */ + __raw_writel(0xffffffff, &pcicptr->p2gm1plbase); + __raw_writel(0xffffffff, &pcicptr->p2gm1pubase); + ____raw_writeq(0, &pcicptr->p2gmgbase[1]); + /* PCI->GB mappings (MEM 1MB) */ + __raw_writel(0xffffffff, &pcicptr->p2gm2pbase); /* 1MB */ + ____raw_writeq(0, &pcicptr->p2gmgbase[2]); + + /* Clear all (including IRBER) except for GBWC */ + __raw_writel((tx4927_pci_opts.gbwc << 16) + & TX4927_PCIC_PCICCFG_GBWC_MASK, + &pcicptr->pciccfg); + /* Enable Initiator Memory Space */ + if (channel->mem_resource->end) + __raw_writel(__raw_readl(&pcicptr->pciccfg) + | TX4927_PCIC_PCICCFG_G2PMEN(0), + &pcicptr->pciccfg); + /* Enable Initiator I/O Space */ + if (channel->io_resource->end) + __raw_writel(__raw_readl(&pcicptr->pciccfg) + | TX4927_PCIC_PCICCFG_G2PIOEN, + &pcicptr->pciccfg); + /* Enable Initiator Config */ + __raw_writel(__raw_readl(&pcicptr->pciccfg) + | TX4927_PCIC_PCICCFG_ICAEN | TX4927_PCIC_PCICCFG_TCAR, + &pcicptr->pciccfg); + + /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ + __raw_writel(0, &pcicptr->pcicfg1); + + __raw_writel((__raw_readl(&pcicptr->g2ptocnt) & ~0xffff) + | (tx4927_pci_opts.trdyto & 0xff) + | ((tx4927_pci_opts.retryto & 0xff) << 8), + &pcicptr->g2ptocnt); + + /* Clear All Local Bus Status */ + __raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus); + /* Enable All Local Bus Interrupts */ + __raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicmask); + /* Clear All Initiator Status */ + __raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus); + /* Enable All Initiator Interrupts */ + __raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pmask); + /* Clear All PCI Status Error */ + __raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff) + | (TX4927_PCIC_PCISTATUS_ALL << 16), + &pcicptr->pcistatus); + /* Enable All PCI Status Error Interrupts */ + __raw_writel(TX4927_PCIC_PCISTATUS_ALL, &pcicptr->pcimask); + + if (!extarb) { + /* Reset Bus Arbiter */ + __raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg); + __raw_writel(0, &pcicptr->pbabm); + /* Enable Bus Arbiter */ + __raw_writel(TX4927_PCIC_PBACFG_PBAEN, &pcicptr->pbacfg); } - return check_abort(flags); + __raw_writel(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY + | PCI_COMMAND_PARITY | PCI_COMMAND_SERR, + &pcicptr->pcistatus); + local_irq_restore(flags); + + printk(KERN_DEBUG + "PCI: COMMAND=%04x,PCIMASK=%04x," + "TRDYTO=%02x,RETRYTO=%02x,GBWC=%03x\n", + __raw_readl(&pcicptr->pcistatus) & 0xffff, + __raw_readl(&pcicptr->pcimask) & 0xffff, + __raw_readl(&pcicptr->g2ptocnt) & 0xff, + (__raw_readl(&pcicptr->g2ptocnt) & 0xff00) >> 8, + (__raw_readl(&pcicptr->pciccfg) >> 16) & 0xfff); } -struct pci_ops tx4927_pci_ops = { - tx4927_pcibios_read_config, - tx4927_pcibios_write_config -}; +static void tx4927_report_pcic_status1(struct tx4927_pcic_reg __iomem *pcicptr) +{ + __u16 pcistatus = (__u16)(__raw_readl(&pcicptr->pcistatus) >> 16); + __u32 g2pstatus = __raw_readl(&pcicptr->g2pstatus); + __u32 pcicstatus = __raw_readl(&pcicptr->pcicstatus); + static struct { + __u32 flag; + const char *str; + } pcistat_tbl[] = { + { PCI_STATUS_DETECTED_PARITY, "DetectedParityError" }, + { PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" }, + { PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" }, + { PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" }, + { PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" }, + { PCI_STATUS_PARITY, "MasterParityError" }, + }, g2pstat_tbl[] = { + { TX4927_PCIC_G2PSTATUS_TTOE, "TIOE" }, + { TX4927_PCIC_G2PSTATUS_RTOE, "RTOE" }, + }, pcicstat_tbl[] = { + { TX4927_PCIC_PCICSTATUS_PME, "PME" }, + { TX4927_PCIC_PCICSTATUS_TLB, "TLB" }, + { TX4927_PCIC_PCICSTATUS_NIB, "NIB" }, + { TX4927_PCIC_PCICSTATUS_ZIB, "ZIB" }, + { TX4927_PCIC_PCICSTATUS_PERR, "PERR" }, + { TX4927_PCIC_PCICSTATUS_SERR, "SERR" }, + { TX4927_PCIC_PCICSTATUS_GBE, "GBE" }, + { TX4927_PCIC_PCICSTATUS_IWB, "IWB" }, + }; + int i, cont; -/* - * h/w only supports devices 0x00 to 0x14 - */ -struct pci_controller tx4927_controller = { - .pci_ops = &tx4927_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; + printk(KERN_ERR ""); + if (pcistatus & TX4927_PCIC_PCISTATUS_ALL) { + printk(KERN_CONT "pcistat:%04x(", pcistatus); + for (i = 0, cont = 0; i < ARRAY_SIZE(pcistat_tbl); i++) + if (pcistatus & pcistat_tbl[i].flag) + printk(KERN_CONT "%s%s", + cont++ ? " " : "", pcistat_tbl[i].str); + printk(KERN_CONT ") "); + } + if (g2pstatus & TX4927_PCIC_G2PSTATUS_ALL) { + printk(KERN_CONT "g2pstatus:%08x(", g2pstatus); + for (i = 0, cont = 0; i < ARRAY_SIZE(g2pstat_tbl); i++) + if (g2pstatus & g2pstat_tbl[i].flag) + printk(KERN_CONT "%s%s", + cont++ ? " " : "", g2pstat_tbl[i].str); + printk(KERN_CONT ") "); + } + if (pcicstatus & TX4927_PCIC_PCICSTATUS_ALL) { + printk(KERN_CONT "pcicstatus:%08x(", pcicstatus); + for (i = 0, cont = 0; i < ARRAY_SIZE(pcicstat_tbl); i++) + if (pcicstatus & pcicstat_tbl[i].flag) + printk(KERN_CONT "%s%s", + cont++ ? " " : "", pcicstat_tbl[i].str); + printk(KERN_CONT ")"); + } + printk(KERN_CONT "\n"); +} + +void tx4927_report_pcic_status(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) { + if (pcicptrs[i].pcicptr) + tx4927_report_pcic_status1(pcicptrs[i].pcicptr); + } +} diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c deleted file mode 100644 index 34494b82cb22..000000000000 --- a/arch/mips/pci/ops-tx4938.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Define the pci_ops for the Toshiba rbtx4938 - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include - -#include -#include - -/* initialize in setup */ -struct resource pci_io_resource = { - .name = "pci IO space", - .start = 0, - .end = 0, - .flags = IORESOURCE_IO -}; - -/* initialize in setup */ -struct resource pci_mem_resource = { - .name = "pci memory space", - .start = 0, - .end = 0, - .flags = IORESOURCE_MEM -}; - -struct resource tx4938_pcic1_pci_io_resource = { - .name = "PCI1 IO", - .start = 0, - .end = 0, - .flags = IORESOURCE_IO -}; -struct resource tx4938_pcic1_pci_mem_resource = { - .name = "PCI1 mem", - .start = 0, - .end = 0, - .flags = IORESOURCE_MEM -}; - -static int mkaddr(int bus, int dev_fn, int where, - struct tx4938_pcic_reg *pcicptr) -{ - if (bus > 0) { - /* Type 1 configuration */ - pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | - ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1; - } else { - if (dev_fn >= PCI_DEVFN(TX4938_PCIC_MAX_DEVNU, 0)) - return -1; - - /* Type 0 configuration */ - pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) | - ((dev_fn & 0xff) << 0x08) | (where & 0xfc); - } - /* clear M_ABORT and Disable M_ABORT Int. */ - pcicptr->pcistatus = - (pcicptr->pcistatus & 0x0000ffff) | - (PCI_STATUS_REC_MASTER_ABORT << 16); - pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT; - - return 0; -} - -static int check_abort(struct tx4938_pcic_reg *pcicptr) -{ - int code = PCIBIOS_SUCCESSFUL; - /* wait write cycle completion before checking error status */ - while (pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB) - ; - if (pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) { - pcicptr->pcistatus = - (pcicptr-> - pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT - << 16); - pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT; - code = PCIBIOS_DEVICE_NOT_FOUND; - } - return code; -} - -extern struct pci_controller tx4938_pci_controller[]; -extern struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch); - -static struct tx4938_pcic_reg *pci_bus_to_pcicptr(struct pci_bus *bus) -{ - struct pci_controller *channel = bus->sysdata; - return get_tx4938_pcicptr(channel - &tx4938_pci_controller[0]); -} - -static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 * val) -{ - int retval, dev, busno, func; - struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus); - void __iomem *cfgdata = - (void __iomem *)(unsigned long)&pcicptr->g2pcfgdata; - - dev = PCI_SLOT(devfn); - func = PCI_FUNC(devfn); - - /* check if the bus is top-level */ - if (bus->parent != NULL) - busno = bus->number; - else { - busno = 0; - } - - if (mkaddr(busno, devfn, where, pcicptr)) - return -1; - - switch (size) { - case 1: -#ifdef __BIG_ENDIAN - cfgdata += (where & 3) ^ 3; -#else - cfgdata += where & 3; -#endif - *val = __raw_readb(cfgdata); - break; - case 2: -#ifdef __BIG_ENDIAN - cfgdata += (where & 2) ^ 2; -#else - cfgdata += where & 2; -#endif - *val = __raw_readw(cfgdata); - break; - case 4: - *val = __raw_readl(cfgdata); - break; - } - - retval = check_abort(pcicptr); - if (retval == PCIBIOS_DEVICE_NOT_FOUND) - *val = 0xffffffff; - - return retval; -} - -static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - int dev, busno, func; - struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus); - void __iomem *cfgdata = - (void __iomem *)(unsigned long)&pcicptr->g2pcfgdata; - - busno = bus->number; - dev = PCI_SLOT(devfn); - func = PCI_FUNC(devfn); - - /* check if the bus is top-level */ - if (bus->parent != NULL) { - busno = bus->number; - } else { - busno = 0; - } - - if (mkaddr(busno, devfn, where, pcicptr)) - return -1; - - switch (size) { - case 1: -#ifdef __BIG_ENDIAN - cfgdata += (where & 3) ^ 3; -#else - cfgdata += where & 3; -#endif - __raw_writeb(val, cfgdata); - break; - case 2: -#ifdef __BIG_ENDIAN - cfgdata += (where & 2) ^ 2; -#else - cfgdata += where & 2; -#endif - __raw_writew(val, cfgdata); - break; - case 4: - __raw_writel(val, cfgdata); - break; - } - - return check_abort(pcicptr); -} - -struct pci_ops tx4938_pci_ops = { - tx4938_pcibios_read_config, - tx4938_pcibios_write_config -}; - -struct pci_controller tx4938_pci_controller[] = { - /* h/w only supports devices 0x00 to 0x14 */ - { - .pci_ops = &tx4938_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, - }, - /* h/w only supports devices 0x00 to 0x14 */ - { - .pci_ops = &tx4938_pci_ops, - .io_resource = &tx4938_pcic1_pci_io_resource, - .mem_resource = &tx4938_pcic1_pci_mem_resource, - } -}; diff --git a/arch/mips/pci/pci-jmr3927.c b/arch/mips/pci/pci-jmr3927.c deleted file mode 100644 index 7fb6bd71901a..000000000000 --- a/arch/mips/pci/pci-jmr3927.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * Copyright (C) 2000-2001 Toshiba Corporation - * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include -#include - -#include -#include - -struct resource pci_io_resource = { - .name = "IO MEM", - .start = 0x1000, /* reserve regacy I/O space */ - .end = 0x1000 + JMR3927_PCIIO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -struct resource pci_mem_resource = { - .name = "PCI MEM", - .start = JMR3927_PCIMEM, - .end = JMR3927_PCIMEM + JMR3927_PCIMEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops jmr3927_pci_ops; - -struct pci_controller jmr3927_controller = { - .pci_ops = &jmr3927_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, - .mem_offset = JMR3927_PCIMEM -}; diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c new file mode 100644 index 000000000000..27e86a09dd41 --- /dev/null +++ b/arch/mips/pci/pci-tx4927.c @@ -0,0 +1,83 @@ +/* + * linux/arch/mips/pci/pci-tx4927.c + * + * Based on linux/arch/mips/txx9/rbtx4938/setup.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright 2001, 2003-2005 MontaVista Software Inc. + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +int __init tx4927_report_pciclk(void) +{ + int pciclk = 0; + + printk(KERN_INFO "PCIC --%s PCICLK:", + (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66) ? + " PCI66" : ""); + if (__raw_readq(&tx4927_ccfgptr->pcfg) & TX4927_PCFG_PCICLKEN_ALL) { + u64 ccfg = __raw_readq(&tx4927_ccfgptr->ccfg); + switch ((unsigned long)ccfg & + TX4927_CCFG_PCIDIVMODE_MASK) { + case TX4927_CCFG_PCIDIVMODE_2_5: + pciclk = txx9_cpu_clock * 2 / 5; break; + case TX4927_CCFG_PCIDIVMODE_3: + pciclk = txx9_cpu_clock / 3; break; + case TX4927_CCFG_PCIDIVMODE_5: + pciclk = txx9_cpu_clock / 5; break; + case TX4927_CCFG_PCIDIVMODE_6: + pciclk = txx9_cpu_clock / 6; break; + } + printk("Internal(%u.%uMHz)", + (pciclk + 50000) / 1000000, + ((pciclk + 50000) / 100000) % 10); + } else { + printk("External"); + pciclk = -1; + } + printk("\n"); + return pciclk; +} + +int __init tx4927_pciclk66_setup(void) +{ + int pciclk; + + /* Assert M66EN */ + tx4927_ccfg_set(TX4927_CCFG_PCI66); + /* Double PCICLK (if possible) */ + if (__raw_readq(&tx4927_ccfgptr->pcfg) & TX4927_PCFG_PCICLKEN_ALL) { + unsigned int pcidivmode = 0; + u64 ccfg = __raw_readq(&tx4927_ccfgptr->ccfg); + pcidivmode = (unsigned long)ccfg & + TX4927_CCFG_PCIDIVMODE_MASK; + switch (pcidivmode) { + case TX4927_CCFG_PCIDIVMODE_5: + case TX4927_CCFG_PCIDIVMODE_2_5: + pcidivmode = TX4927_CCFG_PCIDIVMODE_2_5; + pciclk = txx9_cpu_clock * 2 / 5; + break; + case TX4927_CCFG_PCIDIVMODE_6: + case TX4927_CCFG_PCIDIVMODE_3: + default: + pcidivmode = TX4927_CCFG_PCIDIVMODE_3; + pciclk = txx9_cpu_clock / 3; + } + tx4927_ccfg_change(TX4927_CCFG_PCIDIVMODE_MASK, + pcidivmode); + printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n", + (unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg)); + } else + pciclk = -1; + return pciclk; +} diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c new file mode 100644 index 000000000000..e5375511c2b7 --- /dev/null +++ b/arch/mips/pci/pci-tx4938.c @@ -0,0 +1,134 @@ +/* + * linux/arch/mips/pci/pci-tx4938.c + * + * Based on linux/arch/mips/txx9/rbtx4938/setup.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright 2001, 2003-2005 MontaVista Software Inc. + * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +int __init tx4938_report_pciclk(void) +{ + int pciclk = 0; + + printk(KERN_INFO "PCIC --%s PCICLK:", + (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) ? + " PCI66" : ""); + if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_PCICLKEN_ALL) { + u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg); + switch ((unsigned long)ccfg & + TX4938_CCFG_PCIDIVMODE_MASK) { + case TX4938_CCFG_PCIDIVMODE_4: + pciclk = txx9_cpu_clock / 4; break; + case TX4938_CCFG_PCIDIVMODE_4_5: + pciclk = txx9_cpu_clock * 2 / 9; break; + case TX4938_CCFG_PCIDIVMODE_5: + pciclk = txx9_cpu_clock / 5; break; + case TX4938_CCFG_PCIDIVMODE_5_5: + pciclk = txx9_cpu_clock * 2 / 11; break; + case TX4938_CCFG_PCIDIVMODE_8: + pciclk = txx9_cpu_clock / 8; break; + case TX4938_CCFG_PCIDIVMODE_9: + pciclk = txx9_cpu_clock / 9; break; + case TX4938_CCFG_PCIDIVMODE_10: + pciclk = txx9_cpu_clock / 10; break; + case TX4938_CCFG_PCIDIVMODE_11: + pciclk = txx9_cpu_clock / 11; break; + } + printk("Internal(%u.%uMHz)", + (pciclk + 50000) / 1000000, + ((pciclk + 50000) / 100000) % 10); + } else { + printk("External"); + pciclk = -1; + } + printk("\n"); + return pciclk; +} + +void __init tx4938_report_pci1clk(void) +{ + __u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg); + unsigned int pciclk = + txx9_gbus_clock / ((ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2); + + printk(KERN_INFO "PCIC1 -- %sPCICLK:%u.%uMHz\n", + (ccfg & TX4938_CCFG_PCI1_66) ? "PCI66 " : "", + (pciclk + 50000) / 1000000, + ((pciclk + 50000) / 100000) % 10); +} + +int __init tx4938_pciclk66_setup(void) +{ + int pciclk; + + /* Assert M66EN */ + tx4938_ccfg_set(TX4938_CCFG_PCI66); + /* Double PCICLK (if possible) */ + if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_PCICLKEN_ALL) { + unsigned int pcidivmode = 0; + u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg); + pcidivmode = (unsigned long)ccfg & + TX4938_CCFG_PCIDIVMODE_MASK; + switch (pcidivmode) { + case TX4938_CCFG_PCIDIVMODE_8: + case TX4938_CCFG_PCIDIVMODE_4: + pcidivmode = TX4938_CCFG_PCIDIVMODE_4; + pciclk = txx9_cpu_clock / 4; + break; + case TX4938_CCFG_PCIDIVMODE_9: + case TX4938_CCFG_PCIDIVMODE_4_5: + pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5; + pciclk = txx9_cpu_clock * 2 / 9; + break; + case TX4938_CCFG_PCIDIVMODE_10: + case TX4938_CCFG_PCIDIVMODE_5: + pcidivmode = TX4938_CCFG_PCIDIVMODE_5; + pciclk = txx9_cpu_clock / 5; + break; + case TX4938_CCFG_PCIDIVMODE_11: + case TX4938_CCFG_PCIDIVMODE_5_5: + default: + pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5; + pciclk = txx9_cpu_clock * 2 / 11; + break; + } + tx4938_ccfg_change(TX4938_CCFG_PCIDIVMODE_MASK, + pcidivmode); + printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n", + (unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg)); + } else + pciclk = -1; + return pciclk; +} + +int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot) +{ + if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4938_pcic1ptr) { + switch (slot) { + case TX4927_PCIC_IDSEL_AD_TO_SLOT(31): + if (__raw_readq(&tx4938_ccfgptr->pcfg) & + TX4938_PCFG_ETH0_SEL) + return TXX9_IRQ_BASE + TX4938_IR_ETH0; + break; + case TX4927_PCIC_IDSEL_AD_TO_SLOT(30): + if (__raw_readq(&tx4938_ccfgptr->pcfg) & + TX4938_PCFG_ETH1_SEL) + return TXX9_IRQ_BASE + TX4938_IR_ETH1; + break; + } + return 0; + } + return -1; +} diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index 98d103402b10..b8cdb192543a 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -1,6 +1,12 @@ config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" - depends on TOSHIBA_RBTX4927 + depends on PCI && (SYS_HAS_CPU_TX49XX || SYS_HAS_CPU_TX39XX) + select I8259 + +config PICMG_PCI_BACKPLANE_DEFAULT + bool "Support for PICMG PCI Backplane" + depends on PCI && (SYS_HAS_CPU_TX49XX || SYS_HAS_CPU_TX39XX) + default y if !TOSHIBA_FPCIB0 if TOSHIBA_RBTX4938 @@ -26,3 +32,6 @@ config TX4938_NAND_BOOT Select this option if you need to use NAND boot. endif + +config PCI_TX4927 + bool diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index 8cb4a7e81473..b80b6e072284 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -2,6 +2,8 @@ # Makefile for common code for TXx9 based systems # +obj-y += setup.o +obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_TOSHIBA_RBTX4927) += mem_tx4927.o irq_tx4927.o obj-$(CONFIG_TOSHIBA_RBTX4938) += mem_tx4938.o irq_tx4938.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c new file mode 100644 index 000000000000..8173faab99bb --- /dev/null +++ b/arch/mips/txx9/generic/pci.c @@ -0,0 +1,377 @@ +/* + * linux/arch/mips/txx9/pci.c + * + * Based on linux/arch/mips/txx9/rbtx4927/setup.c, + * linux/arch/mips/txx9/rbtx4938/setup.c, + * and RBTX49xx patch from CELF patch archive. + * + * Copyright 2001-2005 MontaVista Software Inc. + * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org) + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#ifdef CONFIG_TOSHIBA_FPCIB0 +#include +#include +#include +#endif + +static int __init +early_read_config_word(struct pci_controller *hose, + int top_bus, int bus, int devfn, int offset, u16 *value) +{ + struct pci_dev fake_dev; + struct pci_bus fake_bus; + + fake_dev.bus = &fake_bus; + fake_dev.sysdata = hose; + fake_dev.devfn = devfn; + fake_bus.number = bus; + fake_bus.sysdata = hose; + fake_bus.ops = hose->pci_ops; + + if (bus != top_bus) + /* Fake a parent bus structure. */ + fake_bus.parent = &fake_bus; + else + fake_bus.parent = NULL; + + return pci_read_config_word(&fake_dev, offset, value); +} + +int __init txx9_pci66_check(struct pci_controller *hose, int top_bus, + int current_bus) +{ + u32 pci_devfn; + unsigned short vid; + int cap66 = -1; + u16 stat; + + /* It seems SLC90E66 needs some time after PCI reset... */ + mdelay(80); + + printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n"); + + for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { + if (PCI_FUNC(pci_devfn)) + continue; + if (early_read_config_word(hose, top_bus, current_bus, + pci_devfn, PCI_VENDOR_ID, &vid) != + PCIBIOS_SUCCESSFUL) + continue; + if (vid == 0xffff) + continue; + + /* check 66MHz capability */ + if (cap66 < 0) + cap66 = 1; + if (cap66) { + early_read_config_word(hose, top_bus, current_bus, + pci_devfn, PCI_STATUS, &stat); + if (!(stat & PCI_STATUS_66MHZ)) { + printk(KERN_DEBUG + "PCI: %02x:%02x not 66MHz capable.\n", + current_bus, pci_devfn); + cap66 = 0; + break; + } + } + } + return cap66 > 0; +} + +static struct resource primary_pci_mem_res[2] = { + { .name = "PCI MEM" }, + { .name = "PCI MMIO" }, +}; +static struct resource primary_pci_io_res = { .name = "PCI IO" }; +struct pci_controller txx9_primary_pcic = { + .mem_resource = &primary_pci_mem_res[0], + .io_resource = &primary_pci_io_res, +}; + +#ifdef CONFIG_64BIT +int txx9_pci_mem_high __initdata = 1; +#else +int txx9_pci_mem_high __initdata; +#endif + +/* + * allocate pci_controller and resources. + * mem_base, io_base: physical addresss. 0 for auto assignment. + * mem_size and io_size means max size on auto assignment. + * pcic must be &txx9_primary_pcic or NULL. + */ +struct pci_controller *__init +txx9_alloc_pci_controller(struct pci_controller *pcic, + unsigned long mem_base, unsigned long mem_size, + unsigned long io_base, unsigned long io_size) +{ + struct pcic { + struct pci_controller c; + struct resource r_mem[2]; + struct resource r_io; + } *new = NULL; + int min_size = 0x10000; + + if (!pcic) { + new = kzalloc(sizeof(*new), GFP_KERNEL); + if (!new) + return NULL; + new->r_mem[0].name = "PCI mem"; + new->r_mem[1].name = "PCI mmio"; + new->r_io.name = "PCI io"; + new->c.mem_resource = new->r_mem; + new->c.io_resource = &new->r_io; + pcic = &new->c; + } else + BUG_ON(pcic != &txx9_primary_pcic); + pcic->io_resource->flags = IORESOURCE_IO; + + /* + * for auto assignment, first search a (big) region for PCI + * MEM, then search a region for PCI IO. + */ + if (mem_base) { + pcic->mem_resource[0].start = mem_base; + pcic->mem_resource[0].end = mem_base + mem_size - 1; + if (request_resource(&iomem_resource, &pcic->mem_resource[0])) + goto free_and_exit; + } else { + unsigned long min = 0, max = 0x20000000; /* low 512MB */ + if (!mem_size) { + /* default size for auto assignment */ + if (txx9_pci_mem_high) + mem_size = 0x20000000; /* mem:512M(max) */ + else + mem_size = 0x08000000; /* mem:128M(max) */ + } + if (txx9_pci_mem_high) { + min = 0x20000000; + max = 0xe0000000; + } + /* search free region for PCI MEM */ + for (; mem_size >= min_size; mem_size /= 2) { + if (allocate_resource(&iomem_resource, + &pcic->mem_resource[0], + mem_size, min, max, + mem_size, NULL, NULL) == 0) + break; + } + if (mem_size < min_size) + goto free_and_exit; + } + + pcic->mem_resource[1].flags = IORESOURCE_MEM | IORESOURCE_BUSY; + if (io_base) { + pcic->mem_resource[1].start = io_base; + pcic->mem_resource[1].end = io_base + io_size - 1; + if (request_resource(&iomem_resource, &pcic->mem_resource[1])) + goto release_and_exit; + } else { + if (!io_size) + /* default size for auto assignment */ + io_size = 0x01000000; /* io:16M(max) */ + /* search free region for PCI IO in low 512MB */ + for (; io_size >= min_size; io_size /= 2) { + if (allocate_resource(&iomem_resource, + &pcic->mem_resource[1], + io_size, 0, 0x20000000, + io_size, NULL, NULL) == 0) + break; + } + if (io_size < min_size) + goto release_and_exit; + io_base = pcic->mem_resource[1].start; + } + + pcic->mem_resource[0].flags = IORESOURCE_MEM; + if (pcic == &txx9_primary_pcic && + mips_io_port_base == (unsigned long)-1) { + /* map ioport 0 to PCI I/O space address 0 */ + set_io_port_base(IO_BASE + pcic->mem_resource[1].start); + pcic->io_resource->start = 0; + pcic->io_offset = 0; /* busaddr == ioaddr */ + pcic->io_map_base = IO_BASE + pcic->mem_resource[1].start; + } else { + /* physaddr to ioaddr */ + pcic->io_resource->start = + io_base - (mips_io_port_base - IO_BASE); + pcic->io_offset = io_base - (mips_io_port_base - IO_BASE); + pcic->io_map_base = mips_io_port_base; + } + pcic->io_resource->end = pcic->io_resource->start + io_size - 1; + + pcic->mem_offset = 0; /* busaddr == physaddr */ + + printk(KERN_INFO "PCI: IO 0x%08llx-0x%08llx MEM 0x%08llx-0x%08llx\n", + (unsigned long long)pcic->mem_resource[1].start, + (unsigned long long)pcic->mem_resource[1].end, + (unsigned long long)pcic->mem_resource[0].start, + (unsigned long long)pcic->mem_resource[0].end); + + /* register_pci_controller() will request MEM resource */ + release_resource(&pcic->mem_resource[0]); + return pcic; + release_and_exit: + release_resource(&pcic->mem_resource[0]); + free_and_exit: + kfree(new); + printk(KERN_ERR "PCI: Failed to allocate resources.\n"); + return NULL; +} + +static int __init +txx9_arch_pci_init(void) +{ + PCIBIOS_MIN_IO = 0x8000; /* reseve legacy I/O space */ + return 0; +} +arch_initcall(txx9_arch_pci_init); + +/* IRQ/IDSEL mapping */ +int txx9_pci_option = +#ifdef CONFIG_PICMG_PCI_BACKPLANE_DEFAULT + TXX9_PCI_OPT_PICMG | +#endif + TXX9_PCI_OPT_CLK_AUTO; + +enum txx9_pci_err_action txx9_pci_err_action = TXX9_PCI_ERR_REPORT; + +#ifdef CONFIG_TOSHIBA_FPCIB0 +static irqreturn_t i8259_interrupt(int irq, void *dev_id) +{ + int isairq; + + isairq = i8259_irq(); + if (unlikely(isairq <= I8259A_IRQ_BASE)) + return IRQ_NONE; + generic_handle_irq(isairq); + return IRQ_HANDLED; +} + +static int __init +txx9_i8259_irq_setup(int irq) +{ + int err; + + init_i8259_irqs(); + err = request_irq(irq, &i8259_interrupt, IRQF_DISABLED|IRQF_SHARED, + "cascade(i8259)", (void *)(long)irq); + if (!err) + printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq); + return err; +} + +static void __init quirk_slc90e66_bridge(struct pci_dev *dev) +{ + int irq; /* PCI/ISA Bridge interrupt */ + u8 reg_64; + u32 reg_b0; + u8 reg_e1; + irq = pcibios_map_irq(dev, PCI_SLOT(dev->devfn), 1); /* INTA */ + if (!irq) + return; + txx9_i8259_irq_setup(irq); + pci_read_config_byte(dev, 0x64, ®_64); + pci_read_config_dword(dev, 0xb0, ®_b0); + pci_read_config_byte(dev, 0xe1, ®_e1); + /* serial irq control */ + reg_64 = 0xd0; + /* serial irq pin */ + reg_b0 |= 0x00010000; + /* ide irq on isa14 */ + reg_e1 &= 0xf0; + reg_e1 |= 0x0d; + pci_write_config_byte(dev, 0x64, reg_64); + pci_write_config_dword(dev, 0xb0, reg_b0); + pci_write_config_byte(dev, 0xe1, reg_e1); + + smsc_fdc37m81x_init(0x3f0); + smsc_fdc37m81x_config_beg(); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, + SMSC_FDC37M81X_KBD); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); + smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, + 1); + smsc_fdc37m81x_config_end(); +} + +static void quirk_slc90e66_ide(struct pci_dev *dev) +{ + unsigned char dat; + int regs[2] = {0x41, 0x43}; + int i; + + /* SMSC SLC90E66 IDE uses irq 14, 15 (default) */ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14); + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat); + printk(KERN_INFO "PCI: %s: IRQ %02x", pci_name(dev), dat); + /* enable SMSC SLC90E66 IDE */ + for (i = 0; i < ARRAY_SIZE(regs); i++) { + pci_read_config_byte(dev, regs[i], &dat); + pci_write_config_byte(dev, regs[i], dat | 0x80); + pci_read_config_byte(dev, regs[i], &dat); + printk(KERN_CONT " IDETIM%d %02x", i, dat); + } + pci_read_config_byte(dev, 0x5c, &dat); + /* + * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! + * + * This line of code is intended to provide the user with a work + * around solution to the anomalies cited in SMSC's anomaly sheet + * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"". + * + * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! + */ + dat |= 0x01; + pci_write_config_byte(dev, regs[i], dat); + pci_read_config_byte(dev, 0x5c, &dat); + printk(KERN_CONT " REG5C %02x", dat); + printk(KERN_CONT "\n"); +} +#endif /* CONFIG_TOSHIBA_FPCIB0 */ + +static void final_fixup(struct pci_dev *dev) +{ + unsigned char bist; + + /* Do build-in self test */ + if (pci_read_config_byte(dev, PCI_BIST, &bist) == PCIBIOS_SUCCESSFUL && + (bist & PCI_BIST_CAPABLE)) { + unsigned long timeout; + pci_set_power_state(dev, PCI_D0); + printk(KERN_INFO "PCI: %s BIST...", pci_name(dev)); + pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START); + timeout = jiffies + HZ * 2; /* timeout after 2 sec */ + do { + pci_read_config_byte(dev, PCI_BIST, &bist); + if (time_after(jiffies, timeout)) + break; + } while (bist & PCI_BIST_START); + if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START)) + printk(KERN_CONT "failed. (0x%x)\n", bist); + else + printk(KERN_CONT "OK.\n"); + } +} + +#ifdef CONFIG_TOSHIBA_FPCIB0 +#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460 +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0, + quirk_slc90e66_bridge); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, + quirk_slc90e66_ide); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, + quirk_slc90e66_ide); +#endif +DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup); +DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup); diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c new file mode 100644 index 000000000000..46a631177757 --- /dev/null +++ b/arch/mips/txx9/generic/setup.c @@ -0,0 +1,51 @@ +/* + * linux/arch/mips/txx9/generic/setup.c + * + * Based on linux/arch/mips/txx9/rbtx4938/setup.c, + * and RBTX49xx patch from CELF patch archive. + * + * 2003-2005 (c) MontaVista Software, Inc. + * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include + +/* EBUSC settings of TX4927, etc. */ +struct resource txx9_ce_res[8]; +static char txx9_ce_res_name[8][4]; /* "CEn" */ + +/* pcode, internal register */ +char txx9_pcode_str[8]; +static struct resource txx9_reg_res = { + .name = txx9_pcode_str, + .flags = IORESOURCE_MEM, +}; +void __init +txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(txx9_ce_res); i++) { + sprintf(txx9_ce_res_name[i], "CE%d", i); + txx9_ce_res[i].flags = IORESOURCE_MEM; + txx9_ce_res[i].name = txx9_ce_res_name[i]; + } + + sprintf(txx9_pcode_str, "TX%x", pcode); + if (base) { + txx9_reg_res.start = base & 0xfffffffffULL; + txx9_reg_res.end = (base & 0xfffffffffULL) + (size - 1); + request_resource(&iomem_resource, &txx9_reg_res); + } +} + +/* clocks */ +unsigned int txx9_master_clock; +unsigned int txx9_cpu_clock; +unsigned int txx9_gbus_clock; diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c index 85e1daf15c7b..b97d22e15da6 100644 --- a/arch/mips/txx9/jmr3927/irq.c +++ b/arch/mips/txx9/jmr3927/irq.c @@ -109,6 +109,7 @@ static struct irqaction ioc_action = { .name = "IOC", }; +#ifdef CONFIG_PCI static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id) { printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq); @@ -122,6 +123,7 @@ static struct irqaction pcierr_action = { .mask = CPU_MASK_NONE, .name = "PCI error", }; +#endif static void __init jmr3927_irq_init(void); diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 41e0f3b3af2c..baa8c8db9a94 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -30,7 +30,6 @@ #include #include #include -#include #include #include #include @@ -44,6 +43,7 @@ #include #include #include +#include #include #include @@ -96,8 +96,6 @@ void __init plat_time_init(void) extern char * __init prom_getcmdline(void); static void jmr3927_board_init(void); -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; void __init plat_mem_setup(void) { @@ -112,8 +110,8 @@ void __init plat_mem_setup(void) /* * IO/MEM resources. */ - ioport_resource.start = pci_io_resource.start; - ioport_resource.end = pci_io_resource.end; + ioport_resource.start = 0; + ioport_resource.end = 0xffffffff; iomem_resource.start = 0; iomem_resource.end = 0xffffffff; @@ -191,9 +189,33 @@ void __init plat_mem_setup(void) static void tx3927_setup(void); +static void __init jmr3927_pci_setup(void) +{ +#ifdef CONFIG_PCI + int extarb = !(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB); + struct pci_controller *c; + + c = txx9_alloc_pci_controller(&txx9_primary_pcic, + JMR3927_PCIMEM, JMR3927_PCIMEM_SIZE, + JMR3927_PCIIO, JMR3927_PCIIO_SIZE); + register_pci_controller(c); + if (!extarb) { + /* Reset PCI Bus */ + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + udelay(100); + jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, + JMR3927_IOC_RESET_ADDR); + udelay(100); + jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); + } + tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb); +#endif /* CONFIG_PCI */ +} + static void __init jmr3927_board_init(void) { tx3927_setup(); + jmr3927_pci_setup(); /* SIO0 DTR on */ jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); @@ -210,14 +232,6 @@ static void __init jmr3927_board_init(void) static void __init tx3927_setup(void) { int i; -#ifdef CONFIG_PCI - unsigned long mips_pci_io_base = JMR3927_PCIIO; - unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE; - unsigned long mips_pci_mem_base = JMR3927_PCIMEM; - unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE; - /* for legacy I/O, PCI I/O PCI Bus address must be 0 */ - unsigned long mips_pci_io_pciaddr = 0; -#endif /* SDRAMC are configured by PROM */ @@ -272,74 +286,6 @@ static void __init tx3927_setup(void) tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE; #endif -#ifdef CONFIG_PCI - /* PCIC */ - printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:", - tx3927_pcicptr->did, tx3927_pcicptr->vid, - tx3927_pcicptr->rid); - if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) { - printk("External\n"); - /* XXX */ - } else { - printk("Internal\n"); - - /* Reset PCI Bus */ - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - udelay(100); - jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, - JMR3927_IOC_RESET_ADDR); - udelay(100); - jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR); - - - /* Disable External PCI Config. Access */ - tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD; -#ifdef __BIG_ENDIAN - tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE | - TX3927_PCIC_LBC_TIBSE | - TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE; -#endif - /* LB->PCI mappings */ - tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1); - tx3927_pcicptr->ilbioma = mips_pci_io_base; - tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr; - tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1); - tx3927_pcicptr->ilbmma = mips_pci_mem_base; - tx3927_pcicptr->ipbmma = mips_pci_mem_base; - /* PCI->LB mappings */ - tx3927_pcicptr->iobas = 0xffffffff; - tx3927_pcicptr->ioba = 0; - tx3927_pcicptr->tlbioma = 0; - tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1); - tx3927_pcicptr->mba = 0; - tx3927_pcicptr->tlbmma = 0; - /* Enable Direct mapping Address Space Decoder */ - tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE; - - /* Clear All Local Bus Status */ - tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL; - /* Enable All Local Bus Interrupts */ - tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL; - /* Clear All PCI Status Error */ - tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL; - /* Enable All PCI Status Error Interrupts */ - tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL; - - /* PCIC Int => IRC IRQ10 */ - tx3927_pcicptr->il = TX3927_IR_PCI; - /* Target Control (per errata) */ - tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E; - - /* Enable Bus Arbiter */ - tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN; - - tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | - PCI_COMMAND_IO | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - } -#endif /* CONFIG_PCI */ - /* PIO */ /* PIO[15:12] connected to LEDs */ __raw_writel(0x0000f000, &tx3927_pioptr->dir); diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c index 936e50e91d95..bef1447aeed2 100644 --- a/arch/mips/txx9/rbtx4927/irq.c +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -111,9 +111,6 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB #include #include #include -#ifdef CONFIG_TOSHIBA_FPCIB0 -#include -#endif #include #define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG 0 @@ -125,8 +122,6 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB #define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC #define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2) -extern int tx4927_using_backplane; - static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq); static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq); @@ -146,17 +141,8 @@ int toshiba_rbtx4927_irq_nested(int sw_irq) u8 level3; level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f; - if (level3) { + if (level3) sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + fls(level3) - 1; -#ifdef CONFIG_TOSHIBA_FPCIB0 - if (sw_irq == TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC && - tx4927_using_backplane) { - int irq = i8259_irq(); - if (irq >= 0) - sw_irq = irq; - } -#endif - } return (sw_irq); } @@ -205,10 +191,6 @@ void __init arch_init_irq(void) tx4927_irq_init(); toshiba_rbtx4927_irq_ioc_init(); -#ifdef CONFIG_TOSHIBA_FPCIB0 - if (tx4927_using_backplane) - init_i8259_irqs(); -#endif /* Onboard 10M Ether: High Active */ set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH); } diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index df1b6e99b666..86b870abc319 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -47,10 +47,10 @@ #include #include #include -#include #include #include #include +#include #include #include @@ -58,10 +58,10 @@ #include #include #include -#ifdef CONFIG_TOSHIBA_FPCIB0 -#include -#endif +#include +#include #include +#include /* for TX4937 */ #ifdef CONFIG_SERIAL_TXX9 #include #endif @@ -70,356 +70,116 @@ extern void toshiba_rbtx4927_restart(char *command); extern void toshiba_rbtx4927_halt(void); extern void toshiba_rbtx4927_power_off(void); - -int tx4927_using_backplane = 0; - extern void toshiba_rbtx4927_irq_setup(void); char *prom_getcmdline(void); -#ifdef CONFIG_PCI -#undef TX4927_SUPPORT_COMMAND_IO -#undef TX4927_SUPPORT_PCI_66 -int tx4927_cpu_clock = 100000000; /* 100MHz */ -unsigned long mips_pci_io_base; -unsigned long mips_pci_io_size; -unsigned long mips_pci_mem_base; -unsigned long mips_pci_mem_size; -/* for legacy I/O, PCI I/O PCI Bus address must be 0 */ -unsigned long mips_pci_io_pciaddr = 0; -unsigned long mips_memory_upper; static int tx4927_ccfg_toeon = 1; -static int tx4927_pcic_trdyto = 0; /* default: disabled */ -unsigned long tx4927_ce_base[8]; -int tx4927_pci66 = 0; /* 0:auto */ -#endif char *toshiba_name = ""; #ifdef CONFIG_PCI -extern struct pci_controller tx4927_controller; - -static struct pci_dev *fake_pci_dev(struct pci_controller *hose, - int top_bus, int busnr, int devfn) +static void __init tx4927_pci_setup(void) { - static struct pci_dev dev; - static struct pci_bus bus; - - dev.sysdata = (void *)hose; - dev.devfn = devfn; - bus.number = busnr; - bus.ops = hose->pci_ops; - bus.parent = NULL; - dev.bus = &bus; - - return &dev; -} - -#define EARLY_PCI_OP(rw, size, type) \ -static int early_##rw##_config_##size(struct pci_controller *hose, \ - int top_bus, int bus, int devfn, int offset, type value) \ -{ \ - return pci_##rw##_config_##size( \ - fake_pci_dev(hose, top_bus, bus, devfn), \ - offset, value); \ + int extarb = !(__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB); + struct pci_controller *c = &txx9_primary_pcic; + + register_pci_controller(c); + + if (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66) + txx9_pci_option = + (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | + TXX9_PCI_OPT_CLK_66; /* already configured */ + + /* Reset PCI Bus */ + writeb(1, rbtx4927_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_66) + tx4927_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); + writeb(0, rbtx4927_pcireset_addr); + iob(); + + tx4927_report_pciclk(); + tx4927_pcic_setup(tx4927_pcicptr, c, extarb); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_AUTO && + txx9_pci66_check(c, 0, 0)) { + /* Reset PCI Bus */ + writeb(1, rbtx4927_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); + tx4927_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST); + writeb(0, rbtx4927_pcireset_addr); + iob(); + /* Reinitialize PCIC */ + tx4927_report_pciclk(); + tx4927_pcic_setup(tx4927_pcicptr, c, extarb); + } } -EARLY_PCI_OP(read, byte, u8 *) -EARLY_PCI_OP(read, dword, u32 *) -EARLY_PCI_OP(write, byte, u8) -EARLY_PCI_OP(write, dword, u32) - -static int __init tx4927_pcibios_init(void) +static void __init tx4937_pci_setup(void) { - unsigned int id; - u32 pci_devfn; - int devfn_start = 0; - int devfn_stop = 0xff; - int busno = 0; /* One bus on the Toshiba */ - struct pci_controller *hose = &tx4927_controller; - - for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) { - early_read_config_dword(hose, busno, busno, pci_devfn, - PCI_VENDOR_ID, &id); - - if (id == 0xffffffff) { - continue; - } - - if (id == 0x94601055) { - u8 v08_64; - u32 v32_b0; - u8 v08_e1; - - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x64, &v08_64); - early_read_config_dword(hose, busno, busno, - pci_devfn, 0xb0, &v32_b0); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0xe1, &v08_e1); - - /* serial irq control */ - v08_64 = 0xd0; - - /* serial irq pin */ - v32_b0 |= 0x00010000; - - /* ide irq on isa14 */ - v08_e1 &= 0xf0; - v08_e1 |= 0x0d; - - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x64, v08_64); - early_write_config_dword(hose, busno, busno, - pci_devfn, 0xb0, v32_b0); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0xe1, v08_e1); - } - - if (id == 0x91301055) { - u8 v08_04; - u8 v08_09; - u8 v08_41; - u8 v08_43; - u8 v08_5c; - - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x04, &v08_04); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x09, &v08_09); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x41, &v08_41); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x43, &v08_43); - early_read_config_byte(hose, busno, busno, - pci_devfn, 0x5c, &v08_5c); - - /* enable ide master/io */ - v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO); - - /* enable ide native mode */ - v08_09 |= 0x05; - - /* enable primary ide */ - v08_41 |= 0x80; - - /* enable secondary ide */ - v08_43 |= 0x80; - - /* - * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! - * - * This line of code is intended to provide the user with a work - * around solution to the anomalies cited in SMSC's anomaly sheet - * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"". - * - * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! - */ - v08_5c |= 0x01; - - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x5c, v08_5c); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x04, v08_04); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x09, v08_09); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x41, v08_41); - early_write_config_byte(hose, busno, busno, - pci_devfn, 0x43, v08_43); - } - + int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB); + struct pci_controller *c = &txx9_primary_pcic; + + register_pci_controller(c); + + if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) + txx9_pci_option = + (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | + TXX9_PCI_OPT_CLK_66; /* already configured */ + + /* Reset PCI Bus */ + writeb(1, rbtx4927_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_66) + tx4938_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + writeb(0, rbtx4927_pcireset_addr); + iob(); + + tx4938_report_pciclk(); + tx4927_pcic_setup(tx4938_pcicptr, c, extarb); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_AUTO && + txx9_pci66_check(c, 0, 0)) { + /* Reset PCI Bus */ + writeb(1, rbtx4927_pcireset_addr); + /* Reset PCIC */ + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + tx4938_pciclk66_setup(); + mdelay(10); + /* clear PCIC reset */ + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + writeb(0, rbtx4927_pcireset_addr); + iob(); + /* Reinitialize PCIC */ + tx4938_report_pciclk(); + tx4927_pcic_setup(tx4938_pcicptr, c, extarb); } - - register_pci_controller(&tx4927_controller); - return 0; } -arch_initcall(tx4927_pcibios_init); - -extern struct resource pci_io_resource; -extern struct resource pci_mem_resource; - -void __init tx4927_pci_setup(void) +static int __init rbtx4927_arch_init(void) { - static int called = 0; - extern unsigned int tx4927_get_mem_size(void); - - mips_memory_upper = tx4927_get_mem_size() << 20; - mips_memory_upper += KSEG0; - mips_pci_io_base = TX4927_PCIIO; - mips_pci_io_size = TX4927_PCIIO_SIZE; - mips_pci_mem_base = TX4927_PCIMEM; - mips_pci_mem_size = TX4927_PCIMEM_SIZE; - - if (!called) { - printk - ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", - toshiba_name, - (unsigned short) (tx4927_pcicptr->pciid >> 16), - (unsigned short) (tx4927_pcicptr->pciid & 0xffff), - (unsigned short) (tx4927_pcicptr->pciccrev & 0xff), - (!(tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIXARB)) ? "External" : - "Internal"); - called = 1; - } - printk("%s PCIC --%s PCICLK:", toshiba_name, - (tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : ""); - if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) { - int pciclk = 0; - if (mips_machtype == MACH_TOSHIBA_RBTX4937) - switch ((unsigned long) tx4927_ccfgptr-> - ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { - case TX4937_CCFG_PCIDIVMODE_4: - pciclk = tx4927_cpu_clock / 4; - break; - case TX4937_CCFG_PCIDIVMODE_4_5: - pciclk = tx4927_cpu_clock * 2 / 9; - break; - case TX4937_CCFG_PCIDIVMODE_5: - pciclk = tx4927_cpu_clock / 5; - break; - case TX4937_CCFG_PCIDIVMODE_5_5: - pciclk = tx4927_cpu_clock * 2 / 11; - break; - case TX4937_CCFG_PCIDIVMODE_8: - pciclk = tx4927_cpu_clock / 8; - break; - case TX4937_CCFG_PCIDIVMODE_9: - pciclk = tx4927_cpu_clock / 9; - break; - case TX4937_CCFG_PCIDIVMODE_10: - pciclk = tx4927_cpu_clock / 10; - break; - case TX4937_CCFG_PCIDIVMODE_11: - pciclk = tx4927_cpu_clock / 11; - break; - } - - else - switch ((unsigned long) tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { - case TX4927_CCFG_PCIDIVMODE_2_5: - pciclk = tx4927_cpu_clock * 2 / 5; - break; - case TX4927_CCFG_PCIDIVMODE_3: - pciclk = tx4927_cpu_clock / 3; - break; - case TX4927_CCFG_PCIDIVMODE_5: - pciclk = tx4927_cpu_clock / 5; - break; - case TX4927_CCFG_PCIDIVMODE_6: - pciclk = tx4927_cpu_clock / 6; - break; - } - - printk("Internal(%dMHz)", pciclk / 1000000); - } else - printk("External"); - printk("\n"); - - /* GB->PCI mappings */ - tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4; - tx4927_pcicptr->g2piogbase = mips_pci_io_base | -#ifdef __BIG_ENDIAN - TX4927_PCIC_G2PIOGBASE_ECHG -#else - TX4927_PCIC_G2PIOGBASE_BSDIS -#endif - ; - - tx4927_pcicptr->g2piopbase = 0; - - tx4927_pcicptr->g2pmmask[0] = (mips_pci_mem_size - 1) >> 4; - tx4927_pcicptr->g2pmgbase[0] = mips_pci_mem_base | -#ifdef __BIG_ENDIAN - TX4927_PCIC_G2PMnGBASE_ECHG -#else - TX4927_PCIC_G2PMnGBASE_BSDIS -#endif - ; - tx4927_pcicptr->g2pmpbase[0] = mips_pci_mem_base; - - tx4927_pcicptr->g2pmmask[1] = 0; - tx4927_pcicptr->g2pmgbase[1] = 0; - tx4927_pcicptr->g2pmpbase[1] = 0; - tx4927_pcicptr->g2pmmask[2] = 0; - tx4927_pcicptr->g2pmgbase[2] = 0; - tx4927_pcicptr->g2pmpbase[2] = 0; - - - /* PCI->GB mappings (I/O 256B) */ - tx4927_pcicptr->p2giopbase = 0; /* 256B */ - - /* PCI->GB mappings (MEM 512MB) M0 gets all of memory */ - tx4927_pcicptr->p2gm0plbase = 0; - tx4927_pcicptr->p2gm0pubase = 0; - tx4927_pcicptr->p2gmgbase[0] = 0 | TX4927_PCIC_P2GMnGBASE_TMEMEN | -#ifdef __BIG_ENDIAN - TX4927_PCIC_P2GMnGBASE_TECHG -#else - TX4927_PCIC_P2GMnGBASE_TBSDIS -#endif - ; - - /* PCI->GB mappings (MEM 16MB) -not used */ - tx4927_pcicptr->p2gm1plbase = 0xffffffff; - tx4927_pcicptr->p2gm1pubase = 0xffffffff; - tx4927_pcicptr->p2gmgbase[1] = 0; - - /* PCI->GB mappings (MEM 1MB) -not used */ - tx4927_pcicptr->p2gm2pbase = 0xffffffff; - tx4927_pcicptr->p2gmgbase[2] = 0; - - - /* Enable Initiator Memory 0 Space, I/O Space, Config */ - tx4927_pcicptr->pciccfg &= TX4927_PCIC_PCICCFG_LBWC_MASK; - tx4927_pcicptr->pciccfg |= - TX4927_PCIC_PCICCFG_IMSE0 | TX4927_PCIC_PCICCFG_IISE | - TX4927_PCIC_PCICCFG_ICAE | TX4927_PCIC_PCICCFG_ATR; - - - /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ - tx4927_pcicptr->pcicfg1 = 0; - - if (tx4927_pcic_trdyto >= 0) { - tx4927_pcicptr->g2ptocnt &= ~0xff; - tx4927_pcicptr->g2ptocnt |= (tx4927_pcic_trdyto & 0xff); - } - - /* Clear All Local Bus Status */ - tx4927_pcicptr->pcicstatus = TX4927_PCIC_PCICSTATUS_ALL; - /* Enable All Local Bus Interrupts */ - tx4927_pcicptr->pcicmask = TX4927_PCIC_PCICSTATUS_ALL; - /* Clear All Initiator Status */ - tx4927_pcicptr->g2pstatus = TX4927_PCIC_G2PSTATUS_ALL; - /* Enable All Initiator Interrupts */ - tx4927_pcicptr->g2pmask = TX4927_PCIC_G2PSTATUS_ALL; - /* Clear All PCI Status Error */ - tx4927_pcicptr->pcistatus = - (tx4927_pcicptr->pcistatus & 0x0000ffff) | - (TX4927_PCIC_PCISTATUS_ALL << 16); - /* Enable All PCI Status Error Interrupts */ - tx4927_pcicptr->pcimask = TX4927_PCIC_PCISTATUS_ALL; - - /* PCIC Int => IRC IRQ16 */ - tx4927_pcicptr->pcicfg2 = - (tx4927_pcicptr->pcicfg2 & 0xffffff00) | TX4927_IR_PCIC; - - if (!(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCIXARB)) { - /* XXX */ - } else { - /* Reset Bus Arbiter */ - tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_RPBA; - /* Enable Bus Arbiter */ - tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_PBAEN; - } - - tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; + if (mips_machtype == MACH_TOSHIBA_RBTX4937) + tx4937_pci_setup(); + else + tx4927_pci_setup(); + return 0; } +arch_initcall(rbtx4927_arch_init); #endif /* CONFIG_PCI */ static void __noreturn wait_forever(void) @@ -479,8 +239,6 @@ void __init plat_mem_setup(void) cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC); write_c0_config(cp0_config); - set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET); - ioport_resource.end = 0xffffffff; iomem_resource.end = 0xffffffff; @@ -492,8 +250,13 @@ void __init plat_mem_setup(void) txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL); #ifdef CONFIG_PCI + txx9_alloc_pci_controller(&txx9_primary_pcic, + RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE, + RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE); +#else + set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET); +#endif - /* PCIC */ /* * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. * @@ -517,58 +280,38 @@ void __init plat_mem_setup(void) * */ if (mips_machtype == MACH_TOSHIBA_RBTX4937) - switch ((unsigned long)tx4927_ccfgptr-> - ccfg & TX4937_CCFG_PCIDIVMODE_MASK) { - case TX4937_CCFG_PCIDIVMODE_8: - case TX4937_CCFG_PCIDIVMODE_4: - tx4927_cpu_clock = 266666666; /* 266MHz */ + switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) & + TX4938_CCFG_PCIDIVMODE_MASK) { + case TX4938_CCFG_PCIDIVMODE_8: + case TX4938_CCFG_PCIDIVMODE_4: + txx9_cpu_clock = 266666666; /* 266MHz */ break; - case TX4937_CCFG_PCIDIVMODE_9: - case TX4937_CCFG_PCIDIVMODE_4_5: - tx4927_cpu_clock = 300000000; /* 300MHz */ + case TX4938_CCFG_PCIDIVMODE_9: + case TX4938_CCFG_PCIDIVMODE_4_5: + txx9_cpu_clock = 300000000; /* 300MHz */ break; default: - tx4927_cpu_clock = 333333333; /* 333MHz */ + txx9_cpu_clock = 333333333; /* 333MHz */ } else - switch ((unsigned long)tx4927_ccfgptr-> - ccfg & TX4927_CCFG_PCIDIVMODE_MASK) { + switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) & + TX4927_CCFG_PCIDIVMODE_MASK) { case TX4927_CCFG_PCIDIVMODE_2_5: case TX4927_CCFG_PCIDIVMODE_5: - tx4927_cpu_clock = 166666666; /* 166MHz */ + txx9_cpu_clock = 166666666; /* 166MHz */ break; default: - tx4927_cpu_clock = 200000000; /* 200MHz */ + txx9_cpu_clock = 200000000; /* 200MHz */ } + /* change default value to udelay/mdelay take reasonable time */ + loops_per_jiffy = txx9_cpu_clock / HZ / 2; /* CCFG */ /* do reset on watchdog */ - tx4927_ccfgptr->ccfg |= TX4927_CCFG_WR; + tx4927_ccfg_set(TX4927_CCFG_WR); /* enable Timeout BusError */ if (tx4927_ccfg_toeon) - tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE; - - tx4927_pci_setup(); - if (tx4927_using_backplane == 1) - printk("backplane board IS installed\n"); - else - printk("No Backplane \n"); - - /* this is on ISA bus behind PCI bus, so need PCI up first */ -#ifdef CONFIG_TOSHIBA_FPCIB0 - if (tx4927_using_backplane) { - smsc_fdc37m81x_init(0x3f0); - smsc_fdc37m81x_config_beg(); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, - SMSC_FDC37M81X_KBD); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); - smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, - 1); - smsc_fdc37m81x_config_end(); - } -#endif -#endif /* CONFIG_PCI */ + tx4927_ccfg_set(TX4927_CCFG_TOE); #ifdef CONFIG_SERIAL_TXX9 { @@ -611,8 +354,8 @@ void __init plat_mem_setup(void) void __init plat_time_init(void) { - mips_hpt_frequency = tx4927_cpu_clock / 2; - if (tx4927_ccfgptr->ccfg & TX4927_CCFG_TINTDIS) + mips_hpt_frequency = txx9_cpu_clock / 2; + if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS) txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL, TXX9_IRQ_BASE + 17, 50000000); diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index bbd572c9675b..144d2cada820 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -26,6 +25,8 @@ #include #include #include +#include +#include #include #ifdef CONFIG_SERIAL_TXX9 #include @@ -35,37 +36,13 @@ #include extern char * __init prom_getcmdline(void); -static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr); - /* These functions are used for rebooting or halting the machine*/ extern void rbtx4938_machine_restart(char *command); extern void rbtx4938_machine_halt(void); extern void rbtx4938_machine_power_off(void); -/* clocks */ -unsigned int txx9_master_clock; -unsigned int txx9_cpu_clock; -unsigned int txx9_gbus_clock; - -unsigned long rbtx4938_ce_base[8]; -unsigned long rbtx4938_ce_size[8]; -int txboard_pci66_mode; -static int tx4938_pcic_trdyto; /* default: disabled */ -static int tx4938_pcic_retryto; /* default: disabled */ static int tx4938_ccfg_toeon = 1; -struct tx4938_pcic_reg *pcicptrs[4] = { - tx4938_pcicptr /* default setting for TX4938 */ -}; - -static struct { - unsigned long base; - unsigned long size; -} phys_regions[16] __initdata; -static int num_phys_regions __initdata; - -#define PHYS_REGION_MINSIZE 0x10000 - void rbtx4938_machine_halt(void) { printk(KERN_NOTICE "System Halted\n"); @@ -95,473 +72,72 @@ void rbtx4938_machine_restart(char *command) ; } -void __init -txboard_add_phys_region(unsigned long base, unsigned long size) -{ - if (num_phys_regions >= ARRAY_SIZE(phys_regions)) { - printk("phys_region overflow\n"); - return; - } - phys_regions[num_phys_regions].base = base; - phys_regions[num_phys_regions].size = size; - num_phys_regions++; -} -unsigned long __init -txboard_find_free_phys_region(unsigned long begin, unsigned long end, - unsigned long size) -{ - unsigned long base; - int i; - - for (base = begin / size * size; base < end; base += size) { - for (i = 0; i < num_phys_regions; i++) { - if (phys_regions[i].size && - base <= phys_regions[i].base + (phys_regions[i].size - 1) && - base + (size - 1) >= phys_regions[i].base) - break; - } - if (i == num_phys_regions) - return base; - } - return 0; -} -unsigned long __init -txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end, - unsigned long *size) -{ - unsigned long sz, base; - for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) { - base = txboard_find_free_phys_region(begin, end, sz); - if (base) { - *size = sz; - return base; - } - } - return 0; -} -unsigned long __init -txboard_request_phys_region_range(unsigned long begin, unsigned long end, - unsigned long size) -{ - unsigned long base; - base = txboard_find_free_phys_region(begin, end, size); - if (base) - txboard_add_phys_region(base, size); - return base; -} -unsigned long __init -txboard_request_phys_region(unsigned long size) +static void __init rbtx4938_pci_setup(void) { - unsigned long base; - unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ - base = txboard_find_free_phys_region(begin, end, size); - if (base) - txboard_add_phys_region(base, size); - return base; -} -unsigned long __init -txboard_request_phys_region_shrink(unsigned long *size) -{ - unsigned long base; - unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ - base = txboard_find_free_phys_region_shrink(begin, end, size); - if (base) - txboard_add_phys_region(base, *size); - return base; -} - #ifdef CONFIG_PCI -void __init -tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr, - struct pci_controller *channel, - unsigned long pci_io_base, - int extarb) -{ - int i; + int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB); + struct pci_controller *c = &txx9_primary_pcic; - /* Disable All Initiator Space */ - pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)| - TX4938_PCIC_PCICCFG_G2PMEN(1)| - TX4938_PCIC_PCICCFG_G2PMEN(2)| - TX4938_PCIC_PCICCFG_G2PIOEN); - - /* GB->PCI mappings */ - pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4; - pcicptr->g2piogbase = pci_io_base | -#ifdef __BIG_ENDIAN - TX4938_PCIC_G2PIOGBASE_ECHG -#else - TX4938_PCIC_G2PIOGBASE_BSDIS -#endif - ; - pcicptr->g2piopbase = 0; - for (i = 0; i < 3; i++) { - pcicptr->g2pmmask[i] = 0; - pcicptr->g2pmgbase[i] = 0; - pcicptr->g2pmpbase[i] = 0; - } - if (channel->mem_resource->end) { - pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4; - pcicptr->g2pmgbase[0] = channel->mem_resource->start | -#ifdef __BIG_ENDIAN - TX4938_PCIC_G2PMnGBASE_ECHG -#else - TX4938_PCIC_G2PMnGBASE_BSDIS -#endif - ; - pcicptr->g2pmpbase[0] = channel->mem_resource->start; - } - /* PCI->GB mappings (I/O 256B) */ - pcicptr->p2giopbase = 0; /* 256B */ - pcicptr->p2giogbase = 0; - /* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */ - pcicptr->p2gm0plbase = 0; - pcicptr->p2gm0pubase = 0; - pcicptr->p2gmgbase[0] = 0 | - TX4938_PCIC_P2GMnGBASE_TMEMEN | -#ifdef __BIG_ENDIAN - TX4938_PCIC_P2GMnGBASE_TECHG -#else - TX4938_PCIC_P2GMnGBASE_TBSDIS -#endif - ; - /* PCI->GB mappings (MEM 16MB) */ - pcicptr->p2gm1plbase = 0xffffffff; - pcicptr->p2gm1pubase = 0xffffffff; - pcicptr->p2gmgbase[1] = 0; - /* PCI->GB mappings (MEM 1MB) */ - pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */ - pcicptr->p2gmgbase[2] = 0; - - pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK; - /* Enable Initiator Memory Space */ - if (channel->mem_resource->end) - pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0); - /* Enable Initiator I/O Space */ - if (channel->io_resource->end) - pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN; - /* Enable Initiator Config */ - pcicptr->pciccfg |= - TX4938_PCIC_PCICCFG_ICAEN | - TX4938_PCIC_PCICCFG_TCAR; - - /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ - pcicptr->pcicfg1 = 0; - - pcicptr->g2ptocnt &= ~0xffff; - - if (tx4938_pcic_trdyto >= 0) { - pcicptr->g2ptocnt &= ~0xff; - pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff); - } - - if (tx4938_pcic_retryto >= 0) { - pcicptr->g2ptocnt &= ~0xff00; - pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00); - } - - /* Clear All Local Bus Status */ - pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL; - /* Enable All Local Bus Interrupts */ - pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL; - /* Clear All Initiator Status */ - pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL; - /* Enable All Initiator Interrupts */ - pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL; - /* Clear All PCI Status Error */ - pcicptr->pcistatus = - (pcicptr->pcistatus & 0x0000ffff) | - (TX4938_PCIC_PCISTATUS_ALL << 16); - /* Enable All PCI Status Error Interrupts */ - pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL; - - if (!extarb) { - /* Reset Bus Arbiter */ - pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA; - pcicptr->pbabm = 0; - /* Enable Bus Arbiter */ - pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN; - } - - /* PCIC Int => IRC IRQ16 */ - pcicptr->pcicfg2 = - (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC; - - pcicptr->pcistatus = PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; -} - -int __init -tx4938_report_pciclk(void) -{ - unsigned long pcode = TX4938_REV_PCODE(); - int pciclk = 0; - printk("TX%lx PCIC --%s PCICLK:", - pcode, - (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : ""); - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { - - switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) { - case TX4938_CCFG_PCIDIVMODE_4: - pciclk = txx9_cpu_clock / 4; break; - case TX4938_CCFG_PCIDIVMODE_4_5: - pciclk = txx9_cpu_clock * 2 / 9; break; - case TX4938_CCFG_PCIDIVMODE_5: - pciclk = txx9_cpu_clock / 5; break; - case TX4938_CCFG_PCIDIVMODE_5_5: - pciclk = txx9_cpu_clock * 2 / 11; break; - case TX4938_CCFG_PCIDIVMODE_8: - pciclk = txx9_cpu_clock / 8; break; - case TX4938_CCFG_PCIDIVMODE_9: - pciclk = txx9_cpu_clock / 9; break; - case TX4938_CCFG_PCIDIVMODE_10: - pciclk = txx9_cpu_clock / 10; break; - case TX4938_CCFG_PCIDIVMODE_11: - pciclk = txx9_cpu_clock / 11; break; - } - printk("Internal(%dMHz)", pciclk / 1000000); - } else { - printk("External"); - pciclk = -1; - } - printk("\n"); - return pciclk; -} - -void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr) -{ - pcicptrs[ch] = pcicptr; -} - -struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch) -{ - return pcicptrs[ch]; -} - -static struct pci_dev *fake_pci_dev(struct pci_controller *hose, - int top_bus, int busnr, int devfn) -{ - static struct pci_dev dev; - static struct pci_bus bus; + register_pci_controller(c); - dev.sysdata = bus.sysdata = hose; - dev.devfn = devfn; - bus.number = busnr; - bus.ops = hose->pci_ops; - bus.parent = NULL; - dev.bus = &bus; - - return &dev; -} - -#define EARLY_PCI_OP(rw, size, type) \ -static int early_##rw##_config_##size(struct pci_controller *hose, \ - int top_bus, int bus, int devfn, int offset, type value) \ -{ \ - return pci_##rw##_config_##size( \ - fake_pci_dev(hose, top_bus, bus, devfn), \ - offset, value); \ -} - -EARLY_PCI_OP(read, word, u16 *) - -int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus) -{ - u32 pci_devfn; - unsigned short vid; - int devfn_start = 0; - int devfn_stop = 0xff; - int cap66 = -1; - u16 stat; - - printk("PCI: Checking 66MHz capabilities...\n"); - - for (pci_devfn=devfn_start; pci_devfn 0; -} - -int __init -tx4938_pciclk66_setup(void) -{ - int pciclk; - - /* Assert M66EN */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66; - /* Double PCICLK (if possible) */ - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { - unsigned int pcidivmode = - tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK; - switch (pcidivmode) { - case TX4938_CCFG_PCIDIVMODE_8: - case TX4938_CCFG_PCIDIVMODE_4: - pcidivmode = TX4938_CCFG_PCIDIVMODE_4; - pciclk = txx9_cpu_clock / 4; - break; - case TX4938_CCFG_PCIDIVMODE_9: - case TX4938_CCFG_PCIDIVMODE_4_5: - pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5; - pciclk = txx9_cpu_clock * 2 / 9; - break; - case TX4938_CCFG_PCIDIVMODE_10: - case TX4938_CCFG_PCIDIVMODE_5: - pcidivmode = TX4938_CCFG_PCIDIVMODE_5; - pciclk = txx9_cpu_clock / 5; - break; - case TX4938_CCFG_PCIDIVMODE_11: - case TX4938_CCFG_PCIDIVMODE_5_5: - default: - pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5; - pciclk = txx9_cpu_clock * 2 / 11; - break; - } - tx4938_ccfgptr->ccfg = - (tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK) - | pcidivmode; - printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n", - (unsigned long)tx4938_ccfgptr->ccfg); - } else { - pciclk = -1; - } - return pciclk; -} - -extern struct pci_controller tx4938_pci_controller[]; -static int __init tx4938_pcibios_init(void) -{ - unsigned long mem_base[2]; - unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0, TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */ - unsigned long io_base[2]; - unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0, TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */ - /* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */ - int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB); - - PCIBIOS_MIN_IO = 0x00001000UL; - - mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]); - io_base[0] = txboard_request_phys_region_shrink(&io_size[0]); - - printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", - (unsigned short)(tx4938_pcicptr->pciid >> 16), - (unsigned short)(tx4938_pcicptr->pciid & 0xffff), - (unsigned short)(tx4938_pcicptr->pciccrev & 0xff), - extarb ? "External" : "Internal"); - - /* setup PCI area */ - tx4938_pci_controller[0].io_resource->start = io_base[0]; - tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1; - tx4938_pci_controller[0].mem_resource->start = mem_base[0]; - tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1; - - set_tx4938_pcicptr(0, tx4938_pcicptr); - - register_pci_controller(&tx4938_pci_controller[0]); - - if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) { - printk("TX4938_CCFG_PCI66 already configured\n"); - txboard_pci66_mode = -1; /* already configured */ - } + if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) + txx9_pci_option = + (txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) | + TXX9_PCI_OPT_CLK_66; /* already configured */ /* Reset PCI Bus */ writeb(0, rbtx4938_pcireset_addr); /* Reset PCIC */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; - if (txboard_pci66_mode > 0) + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_66) tx4938_pciclk66_setup(); mdelay(10); /* clear PCIC reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); writeb(1, rbtx4938_pcireset_addr); - mmiowb(); - tx4938_report_pcic_status1(tx4938_pcicptr); + iob(); tx4938_report_pciclk(); - tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); - if (txboard_pci66_mode == 0 && - txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) { + tx4927_pcic_setup(tx4938_pcicptr, c, extarb); + if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) == + TXX9_PCI_OPT_CLK_AUTO && + txx9_pci66_check(c, 0, 0)) { /* Reset PCI Bus */ writeb(0, rbtx4938_pcireset_addr); /* Reset PCIC */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); tx4938_pciclk66_setup(); mdelay(10); /* clear PCIC reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST); writeb(1, rbtx4938_pcireset_addr); - mmiowb(); + iob(); /* Reinitialize PCIC */ tx4938_report_pciclk(); - tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); + tx4927_pcic_setup(tx4938_pcicptr, c, extarb); } - mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]); - io_base[1] = txboard_request_phys_region_shrink(&io_size[1]); - /* Reset PCIC1 */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST; - /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */ - if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD)) - tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66; - else - tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66; - mdelay(10); - /* clear PCIC1 reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; - tx4938_report_pcic_status1(tx4938_pcic1ptr); - - printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x", - (unsigned short)(tx4938_pcic1ptr->pciid >> 16), - (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff), - (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff)); - printk("%s PCICLK:%dMHz\n", - (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "", - txx9_gbus_clock / - ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) / - 1000000); - - /* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */ - tx4938_pci_controller[1].io_resource->start = - io_base[1] - io_base[0]; - tx4938_pci_controller[1].io_resource->end = - io_base[1] - io_base[0] + io_size[1] - 1; - tx4938_pci_controller[1].mem_resource->start = mem_base[1]; - tx4938_pci_controller[1].mem_resource->end = - mem_base[1] + mem_size[1] - 1; - set_tx4938_pcicptr(1, tx4938_pcic1ptr); - - register_pci_controller(&tx4938_pci_controller[1]); - - tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb); - - /* map ioport 0 to PCI I/O space address 0 */ - set_io_port_base(KSEG1 + io_base[0]); - - return 0; -} - -arch_initcall(tx4938_pcibios_init); - + if (__raw_readq(&tx4938_ccfgptr->pcfg) & + (TX4938_PCFG_ETH0_SEL|TX4938_PCFG_ETH1_SEL)) { + /* Reset PCIC1 */ + txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST); + /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */ + if (!(__raw_readq(&tx4938_ccfgptr->ccfg) + & TX4938_CCFG_PCI1DMD)) + tx4938_ccfg_set(TX4938_CCFG_PCI1_66); + mdelay(10); + /* clear PCIC1 reset */ + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST); + tx4938_report_pci1clk(); + + /* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */ + c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000); + register_pci_controller(c); + tx4927_pcic_setup(tx4938_pcic1ptr, c, 0); + } #endif /* CONFIG_PCI */ +} /* SPI support */ @@ -594,7 +170,7 @@ static int __init rbtx4938_ethaddr_init(void) unsigned int id = TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0); struct platform_device *pdev; - if (!(tx4938_ccfgptr->pcfg & + if (!(__raw_readq(&tx4938_ccfgptr->pcfg) & (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL))) continue; pdev = platform_device_alloc("tc35815-mac", id); @@ -611,18 +187,12 @@ device_initcall(rbtx4938_ethaddr_init); static void __init rbtx4938_spi_setup(void) { /* set SPI_SEL */ - tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL; + txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_SPI_SEL); } static struct resource rbtx4938_fpga_resource; - -static char pcode_str[8]; -static struct resource tx4938_reg_resource = { - .start = TX4938_REG_BASE, - .end = TX4938_REG_BASE + TX4938_REG_SIZE, - .name = pcode_str, - .flags = IORESOURCE_MEM -}; +static struct resource tx4938_sdram_resource[4]; +static struct resource tx4938_sram_resource; void __init tx4938_board_setup(void) { @@ -631,24 +201,28 @@ void __init tx4938_board_setup(void) int cpuclk = 0; unsigned long pcode = TX4938_REV_PCODE(); - ioport_resource.start = 0x1000; + ioport_resource.start = 0; ioport_resource.end = 0xffffffff; - iomem_resource.start = 0x1000; + iomem_resource.start = 0; iomem_resource.end = 0xffffffff; /* expand to 4GB */ - sprintf(pcode_str, "TX%lx", pcode); + txx9_reg_res_init(pcode, TX4938_REG_BASE, + TX4938_REG_SIZE); /* SDRAMC,EBUSC are configured by PROM */ for (i = 0; i < 8; i++) { - if (!(tx4938_ebuscptr->cr[i] & 0x8)) + if (!(TX4938_EBUSC_CR(i) & 0x8)) continue; /* disabled */ - rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i); - txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i)); + txx9_ce_res[i].start = (unsigned long)TX4938_EBUSC_BA(i); + txx9_ce_res[i].end = + txx9_ce_res[i].start + TX4938_EBUSC_SIZE(i) - 1; + request_resource(&iomem_resource, &txx9_ce_res[i]); } /* clocks */ if (txx9_master_clock) { + u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg); /* calculate gbus_clock and cpu_clock_freq from master_clock */ - divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; + divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK; switch (divmode) { case TX4938_CCFG_DIVMODE_8: case TX4938_CCFG_DIVMODE_10: @@ -678,12 +252,13 @@ void __init tx4938_board_setup(void) } txx9_cpu_clock = cpuclk; } else { + u64 ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg); if (txx9_cpu_clock == 0) { txx9_cpu_clock = 300000000; /* 300MHz */ } /* calculate gbus_clock and master_clock from cpu_clock_freq */ cpuclk = txx9_cpu_clock; - divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; + divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK; switch (divmode) { case TX4938_CCFG_DIVMODE_2: case TX4938_CCFG_DIVMODE_8: @@ -717,32 +292,32 @@ void __init tx4938_board_setup(void) /* CCFG */ /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW; + tx4938_ccfg_set(TX4938_CCFG_WDRST | TX4938_CCFG_BEOW); /* do reset on watchdog */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_WR; + tx4938_ccfg_set(TX4938_CCFG_WR); /* clear PCIC1 reset */ - if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST) - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; + txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST); /* enable Timeout BusError */ if (tx4938_ccfg_toeon) - tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE; + tx4938_ccfg_set(TX4938_CCFG_TOE); /* DMA selection */ - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL; + txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_DMASEL_ALL); /* Use external clock for external arbiter */ - if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB)) - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL; - - printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n", - pcode_str, - cpuclk / 1000000, txx9_master_clock / 1000000, - (unsigned long)tx4938_ccfgptr->crir, - tx4938_ccfgptr->ccfg, - tx4938_ccfgptr->pcfg); - - printk("%s SDRAMC --", pcode_str); + if (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB)) + txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_PCICLKEN_ALL); + + printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n", + txx9_pcode_str, + (cpuclk + 500000) / 1000000, + (txx9_master_clock + 500000) / 1000000, + (__u32)____raw_readq(&tx4938_ccfgptr->crir), + (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg), + (unsigned long long)____raw_readq(&tx4938_ccfgptr->pcfg)); + + printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str); for (i = 0; i < 4; i++) { unsigned long long cr = tx4938_sdramcptr->cr[i]; unsigned long ram_base, ram_size; @@ -753,16 +328,24 @@ void __init tx4938_board_setup(void) if (ram_base >= 0x20000000) continue; /* high memory (ignore) */ printk(" CR%d:%016Lx", i, cr); - txboard_add_phys_region(ram_base, ram_size); + tx4938_sdram_resource[i].name = "SDRAM"; + tx4938_sdram_resource[i].start = ram_base; + tx4938_sdram_resource[i].end = ram_base + ram_size - 1; + tx4938_sdram_resource[i].flags = IORESOURCE_MEM; + request_resource(&iomem_resource, &tx4938_sdram_resource[i]); } printk(" TR:%09Lx\n", tx4938_sdramcptr->tr); /* SRAM */ - if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) { + if (tx4938_sramcptr->cr & 1) { unsigned int size = 0x800; unsigned long base = (tx4938_sramcptr->cr >> (39-11)) & ~(size - 1); - txboard_add_phys_region(base, size); + tx4938_sram_resource.name = "SRAM"; + tx4938_sram_resource.start = base; + tx4938_sram_resource.end = base + size - 1; + tx4938_sram_resource.flags = IORESOURCE_MEM; + request_resource(&iomem_resource, &tx4938_sram_resource); } /* TMR */ @@ -778,71 +361,15 @@ void __init tx4938_board_setup(void) __raw_writel(0, &tx4938_pioptr->maskcpu); __raw_writel(0, &tx4938_pioptr->maskext); - /* TX4938 internal registers */ - if (request_resource(&iomem_resource, &tx4938_reg_resource)) - printk("request resource for internal registers failed\n"); -} - #ifdef CONFIG_PCI -static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr) -{ - unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16); - unsigned long g2pstatus = pcicptr->g2pstatus; - unsigned long pcicstatus = pcicptr->pcicstatus; - static struct { - unsigned long flag; - const char *str; - } pcistat_tbl[] = { - { PCI_STATUS_DETECTED_PARITY, "DetectedParityError" }, - { PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" }, - { PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" }, - { PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" }, - { PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" }, - { PCI_STATUS_PARITY, "MasterParityError" }, - }, g2pstat_tbl[] = { - { TX4938_PCIC_G2PSTATUS_TTOE, "TIOE" }, - { TX4938_PCIC_G2PSTATUS_RTOE, "RTOE" }, - }, pcicstat_tbl[] = { - { TX4938_PCIC_PCICSTATUS_PME, "PME" }, - { TX4938_PCIC_PCICSTATUS_TLB, "TLB" }, - { TX4938_PCIC_PCICSTATUS_NIB, "NIB" }, - { TX4938_PCIC_PCICSTATUS_ZIB, "ZIB" }, - { TX4938_PCIC_PCICSTATUS_PERR, "PERR" }, - { TX4938_PCIC_PCICSTATUS_SERR, "SERR" }, - { TX4938_PCIC_PCICSTATUS_GBE, "GBE" }, - { TX4938_PCIC_PCICSTATUS_IWB, "IWB" }, - }; - int i; - - printk("pcistat:%04x(", pcistatus); - for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++) - if (pcistatus & pcistat_tbl[i].flag) - printk("%s ", pcistat_tbl[i].str); - printk("), g2pstatus:%08lx(", g2pstatus); - for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++) - if (g2pstatus & g2pstat_tbl[i].flag) - printk("%s ", g2pstat_tbl[i].str); - printk("), pcicstatus:%08lx(", pcicstatus); - for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++) - if (pcicstatus & pcicstat_tbl[i].flag) - printk("%s ", pcicstat_tbl[i].str); - printk(")\n"); -} - -void tx4938_report_pcic_status(void) -{ - int i; - struct tx4938_pcic_reg *pcicptr; - for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++) - tx4938_report_pcic_status1(pcicptr); + txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0); +#endif } -#endif /* CONFIG_PCI */ - void __init plat_time_init(void) { mips_hpt_frequency = txx9_cpu_clock / 2; - if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS) + if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS) txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL, TXX9_IRQ_BASE + TX4938_IR_TMR(0), txx9_gbus_clock / 2); @@ -890,19 +417,20 @@ void __init plat_mem_setup(void) #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 printk("PIOSEL: disabling both ata and nand selection\n"); local_irq_disable(); - tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); + txx9_clear64(&tx4938_ccfgptr->pcfg, + TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND printk("PIOSEL: enabling nand selection\n"); - tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL; - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL; + txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); + txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); #endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA printk("PIOSEL: enabling ata selection\n"); - tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL; - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL; + txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL); + txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL); #endif #ifdef CONFIG_IP_PNP @@ -920,7 +448,7 @@ void __init plat_mem_setup(void) #endif rbtx4938_spi_setup(); - pcfg = tx4938_ccfgptr->pcfg; /* updated */ + pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg); /* updated */ /* fixup piosel */ if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == TX4938_PCFG_ATA_SEL) @@ -1063,6 +591,7 @@ static int __init rbtx4938_arch_init(void) { txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16); gpiochip_add(&rbtx4938_spi_gpio_chip); + rbtx4938_pci_setup(); return rbtx4938_spi_init(); } arch_initcall(rbtx4938_arch_init); diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h new file mode 100644 index 000000000000..2ff6c2002204 --- /dev/null +++ b/include/asm-mips/txx9/generic.h @@ -0,0 +1,23 @@ +/* + * linux/include/asm-mips/txx9/generic.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9_GENERIC_H +#define __ASM_TXX9_GENERIC_H + +#include +#include /* for struct resource */ + +extern struct resource txx9_ce_res[]; +extern char txx9_pcode_str[8]; +void txx9_reg_res_init(unsigned int pcode, unsigned long base, + unsigned long size); + +extern unsigned int txx9_master_clock; +extern unsigned int txx9_cpu_clock; +extern unsigned int txx9_gbus_clock; + +#endif /* __ASM_TXX9_GENERIC_H */ diff --git a/include/asm-mips/txx9/pci.h b/include/asm-mips/txx9/pci.h new file mode 100644 index 000000000000..d89a45091e24 --- /dev/null +++ b/include/asm-mips/txx9/pci.h @@ -0,0 +1,36 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9_PCI_H +#define __ASM_TXX9_PCI_H + +#include + +extern struct pci_controller txx9_primary_pcic; +struct pci_controller * +txx9_alloc_pci_controller(struct pci_controller *pcic, + unsigned long mem_base, unsigned long mem_size, + unsigned long io_base, unsigned long io_size); + +int txx9_pci66_check(struct pci_controller *hose, int top_bus, + int current_bus); +extern int txx9_pci_mem_high __initdata; + +extern int txx9_pci_option; +#define TXX9_PCI_OPT_PICMG 0x0002 +#define TXX9_PCI_OPT_CLK_33 0x0008 +#define TXX9_PCI_OPT_CLK_66 0x0010 +#define TXX9_PCI_OPT_CLK_MASK \ + (TXX9_PCI_OPT_CLK_33 | TXX9_PCI_OPT_CLK_66) +#define TXX9_PCI_OPT_CLK_AUTO TXX9_PCI_OPT_CLK_MASK + +enum txx9_pci_err_action { + TXX9_PCI_ERR_REPORT, + TXX9_PCI_ERR_IGNORE, + TXX9_PCI_ERR_PANIC, +}; +extern enum txx9_pci_err_action txx9_pci_err_action; + +#endif /* __ASM_TXX9_PCI_H */ diff --git a/include/asm-mips/txx9/rbtx4927.h b/include/asm-mips/txx9/rbtx4927.h index 5531342bcc01..5b6f488b1b3c 100644 --- a/include/asm-mips/txx9/rbtx4927.h +++ b/include/asm-mips/txx9/rbtx4927.h @@ -29,10 +29,33 @@ #include +#define RBTX4927_PCIMEM 0x08000000 +#define RBTX4927_PCIMEM_SIZE 0x08000000 +#define RBTX4927_PCIIO 0x16000000 +#define RBTX4927_PCIIO_SIZE 0x01000000 + +#define rbtx4927_pcireset_addr ((__u8 __iomem *)0xbc00f006UL) + +/* bits for ISTAT/IMASK/IMSTAT */ +#define RBTX4927_INTB_PCID 0 +#define RBTX4927_INTB_PCIC 1 +#define RBTX4927_INTB_PCIB 2 +#define RBTX4927_INTB_PCIA 3 +#define RBTX4927_INTF_PCID (1 << RBTX4927_INTB_PCID) +#define RBTX4927_INTF_PCIC (1 << RBTX4927_INTB_PCIC) +#define RBTX4927_INTF_PCIB (1 << RBTX4927_INTB_PCIB) +#define RBTX4927_INTF_PCIA (1 << RBTX4927_INTB_PCIA) + +#define RBTX4927_IRQ_IOC (TX4927_IRQ_PIC_BEG + TX4927_NUM_IR) +#define RBTX4927_IRQ_IOC_PCID (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCID) +#define RBTX4927_IRQ_IOC_PCIC (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIC) +#define RBTX4927_IRQ_IOC_PCIB (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIB) +#define RBTX4927_IRQ_IOC_PCIA (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIA) + #ifdef CONFIG_PCI -#define TBTX4927_ISA_IO_OFFSET TX4927_PCIIO +#define RBTX4927_ISA_IO_OFFSET RBTX4927_PCIIO #else -#define TBTX4927_ISA_IO_OFFSET 0 +#define RBTX4927_ISA_IO_OFFSET 0 #endif #define RBTX4927_SW_RESET_DO (void __iomem *)0xbc00f000UL @@ -41,7 +64,7 @@ #define RBTX4927_SW_RESET_ENABLE (void __iomem *)0xbc00f002UL #define RBTX4927_SW_RESET_ENABLE_SET 0x01 -#define RBTX4927_RTL_8019_BASE (0x1c020280-TBTX4927_ISA_IO_OFFSET) +#define RBTX4927_RTL_8019_BASE (0x1c020280 - RBTX4927_ISA_IO_OFFSET) #define RBTX4927_RTL_8019_IRQ (TX4927_IRQ_PIC_BEG + 5) int toshiba_rbtx4927_irq_nested(int sw_irq); diff --git a/include/asm-mips/txx9/tx3927.h b/include/asm-mips/txx9/tx3927.h index 63b62d6061f5..ca414c7624e1 100644 --- a/include/asm-mips/txx9/tx3927.h +++ b/include/asm-mips/txx9/tx3927.h @@ -316,4 +316,8 @@ struct tx3927_ccfg_reg { #define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch)) #define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG) +struct pci_controller; +void __init tx3927_pcic_setup(struct pci_controller *channel, + unsigned long sdram_size, int extarb); + #endif /* __ASM_TXX9_TX3927_H */ diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h index f21a7b1831e5..c0382fd2ae7f 100644 --- a/include/asm-mips/txx9/tx4927.h +++ b/include/asm-mips/txx9/tx4927.h @@ -27,7 +27,10 @@ #ifndef __ASM_TXX9_TX4927_H #define __ASM_TXX9_TX4927_H +#include +#include #include +#include #define TX4927_IRQ_CP0_BEG MIPS_CPU_IRQ_BASE #define TX4927_IRQ_CP0_END (MIPS_CPU_IRQ_BASE + 8 - 1) @@ -43,15 +46,6 @@ #define TX4927_IRQ_NEST_EXT_ON_PIC (TX4927_IRQ_PIC_BEG+3) -#define TX4927_CCFG_TOE 0x00004000 -#define TX4927_CCFG_WR 0x00008000 -#define TX4927_CCFG_TINTDIS 0x01000000 - -#define TX4927_PCIMEM 0x08000000 -#define TX4927_PCIMEM_SIZE 0x08000000 -#define TX4927_PCIIO 0x16000000 -#define TX4927_PCIIO_SIZE 0x01000000 - #define TX4927_SDRAMC_REG 0xff1f8000 #define TX4927_EBUSC_REG 0xff1f9000 #define TX4927_PCIC_REG 0xff1fd000 @@ -60,36 +54,9 @@ #define TX4927_NR_TMR 3 #define TX4927_TMR_REG(ch) (0xff1ff000 + (ch) * 0x100) -/* bits for ISTAT3/IMASK3/IMSTAT3 */ -#define TX4927_INT3B_PCID 0 -#define TX4927_INT3B_PCIC 1 -#define TX4927_INT3B_PCIB 2 -#define TX4927_INT3B_PCIA 3 -#define TX4927_INT3F_PCID (1 << TX4927_INT3B_PCID) -#define TX4927_INT3F_PCIC (1 << TX4927_INT3B_PCIC) -#define TX4927_INT3F_PCIB (1 << TX4927_INT3B_PCIB) -#define TX4927_INT3F_PCIA (1 << TX4927_INT3B_PCIA) - -#define TX4927_NR_IRQ_LOCAL TX4927_IRQ_PIC_BEG -#define TX4927_NR_IRQ_IRC 32 /* On-Chip IRC */ - #define TX4927_IR_PCIC 16 #define TX4927_IR_PCIERR 22 -#define TX4927_IR_PCIPMA 23 -#define TX4927_IRQ_IRC_PCIC (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIC) -#define TX4927_IRQ_IRC_PCIERR (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIERR) -#define TX4927_IRQ_IOC1 (TX4927_NR_IRQ_LOCAL + TX4927_NR_IRQ_IRC) -#define TX4927_IRQ_IOC_PCID (TX4927_IRQ_IOC1 + TX4927_INT3B_PCID) -#define TX4927_IRQ_IOC_PCIC (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIC) -#define TX4927_IRQ_IOC_PCIB (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIB) -#define TX4927_IRQ_IOC_PCIA (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIA) - -#ifdef _LANGUAGE_ASSEMBLY -#define _CONST64(c) c -#else -#define _CONST64(c) c##ull - -#include +#define TX4927_NUM_IR 32 struct tx4927_sdramc_reg { volatile unsigned long long cr[4]; @@ -104,177 +71,158 @@ struct tx4927_ebusc_reg { }; struct tx4927_ccfg_reg { - volatile unsigned long long ccfg; - volatile unsigned long long crir; - volatile unsigned long long pcfg; - volatile unsigned long long tear; - volatile unsigned long long clkctr; - volatile unsigned long long unused0; - volatile unsigned long long garbc; - volatile unsigned long long unused1; - volatile unsigned long long unused2; - volatile unsigned long long ramp; -}; - -struct tx4927_pcic_reg { - volatile unsigned long pciid; - volatile unsigned long pcistatus; - volatile unsigned long pciccrev; - volatile unsigned long pcicfg1; - volatile unsigned long p2gm0plbase; /* +10 */ - volatile unsigned long p2gm0pubase; - volatile unsigned long p2gm1plbase; - volatile unsigned long p2gm1pubase; - volatile unsigned long p2gm2pbase; /* +20 */ - volatile unsigned long p2giopbase; - volatile unsigned long unused0; - volatile unsigned long pcisid; - volatile unsigned long unused1; /* +30 */ - volatile unsigned long pcicapptr; - volatile unsigned long unused2; - volatile unsigned long pcicfg2; - volatile unsigned long g2ptocnt; /* +40 */ - volatile unsigned long unused3[15]; - volatile unsigned long g2pstatus; /* +80 */ - volatile unsigned long g2pmask; - volatile unsigned long pcisstatus; - volatile unsigned long pcimask; - volatile unsigned long p2gcfg; /* +90 */ - volatile unsigned long p2gstatus; - volatile unsigned long p2gmask; - volatile unsigned long p2gccmd; - volatile unsigned long unused4[24]; /* +a0 */ - volatile unsigned long pbareqport; /* +100 */ - volatile unsigned long pbacfg; - volatile unsigned long pbastatus; - volatile unsigned long pbamask; - volatile unsigned long pbabm; /* +110 */ - volatile unsigned long pbacreq; - volatile unsigned long pbacgnt; - volatile unsigned long pbacstate; - volatile unsigned long long g2pmgbase[3]; /* +120 */ - volatile unsigned long long g2piogbase; - volatile unsigned long g2pmmask[3]; /* +140 */ - volatile unsigned long g2piomask; - volatile unsigned long long g2pmpbase[3]; /* +150 */ - volatile unsigned long long g2piopbase; - volatile unsigned long pciccfg; /* +170 */ - volatile unsigned long pcicstatus; - volatile unsigned long pcicmask; - volatile unsigned long unused5; - volatile unsigned long long p2gmgbase[3]; /* +180 */ - volatile unsigned long long p2giogbase; - volatile unsigned long g2pcfgadrs; /* +1a0 */ - volatile unsigned long g2pcfgdata; - volatile unsigned long unused6[8]; - volatile unsigned long g2pintack; - volatile unsigned long g2pspc; - volatile unsigned long unused7[12]; /* +1d0 */ - volatile unsigned long long pdmca; /* +200 */ - volatile unsigned long long pdmga; - volatile unsigned long long pdmpa; - volatile unsigned long long pdmcut; - volatile unsigned long long pdmcnt; /* +220 */ - volatile unsigned long long pdmsts; - volatile unsigned long long unused8[2]; - volatile unsigned long long pdmdb[4]; /* +240 */ - volatile unsigned long long pdmtdh; /* +260 */ - volatile unsigned long long pdmdms; + u64 ccfg; + u64 crir; + u64 pcfg; + u64 toea; + u64 clkctr; + u64 unused0; + u64 garbc; + u64 unused1; + u64 unused2; + u64 ramp; }; -#endif /* _LANGUAGE_ASSEMBLY */ - -/* - * PCIC - */ - -/* bits for G2PSTATUS/G2PMASK */ -#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003 -#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002 -#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001 - -/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */ -#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900 - -/* bits for PBACFG */ -#define TX4927_PCIC_PBACFG_RPBA 0x00000004 -#define TX4927_PCIC_PBACFG_PBAEN 0x00000002 -#define TX4927_PCIC_PBACFG_BMCEN 0x00000001 - -/* bits for G2PMnGBASE */ -#define TX4927_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for G2PIOGBASE */ -#define TX4927_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for PCICSTATUS/PCICMASK */ -#define TX4927_PCIC_PCICSTATUS_ALL 0x000007dc - -/* bits for PCICCFG */ -#define TX4927_PCIC_PCICCFG_LBWC_MASK 0x0fff0000 -#define TX4927_PCIC_PCICCFG_HRST 0x00000800 -#define TX4927_PCIC_PCICCFG_SRST 0x00000400 -#define TX4927_PCIC_PCICCFG_IRBER 0x00000200 -#define TX4927_PCIC_PCICCFG_IMSE0 0x00000100 -#define TX4927_PCIC_PCICCFG_IMSE1 0x00000080 -#define TX4927_PCIC_PCICCFG_IMSE2 0x00000040 -#define TX4927_PCIC_PCICCFG_IISE 0x00000020 -#define TX4927_PCIC_PCICCFG_ATR 0x00000010 -#define TX4927_PCIC_PCICCFG_ICAE 0x00000008 - -/* bits for P2GMnGBASE */ -#define TX4927_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000) -#define TX4927_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000) - -/* bits for P2GIOGBASE */ -#define TX4927_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000) -#define TX4927_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000) - -#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) -#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32) - /* * CCFG */ /* CCFG : Chip Configuration */ +#define TX4927_CCFG_WDRST 0x0000020000000000ULL +#define TX4927_CCFG_WDREXEN 0x0000010000000000ULL +#define TX4927_CCFG_BCFG_MASK 0x000000ff00000000ULL +#define TX4927_CCFG_TINTDIS 0x01000000 #define TX4927_CCFG_PCI66 0x00800000 -#define TX4927_CCFG_PCIMIDE 0x00400000 -#define TX4927_CCFG_PCIXARB 0x00002000 +#define TX4927_CCFG_PCIMODE 0x00400000 +#define TX4927_CCFG_DIVMODE_MASK 0x000e0000 +#define TX4927_CCFG_DIVMODE_8 (0x0 << 17) +#define TX4927_CCFG_DIVMODE_12 (0x1 << 17) +#define TX4927_CCFG_DIVMODE_16 (0x2 << 17) +#define TX4927_CCFG_DIVMODE_10 (0x3 << 17) +#define TX4927_CCFG_DIVMODE_2 (0x4 << 17) +#define TX4927_CCFG_DIVMODE_3 (0x5 << 17) +#define TX4927_CCFG_DIVMODE_4 (0x6 << 17) +#define TX4927_CCFG_DIVMODE_2_5 (0x7 << 17) +#define TX4927_CCFG_BEOW 0x00010000 +#define TX4927_CCFG_WR 0x00008000 +#define TX4927_CCFG_TOE 0x00004000 +#define TX4927_CCFG_PCIARB 0x00002000 #define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800 #define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000 #define TX4927_CCFG_PCIDIVMODE_3 0x00000800 #define TX4927_CCFG_PCIDIVMODE_5 0x00001000 #define TX4927_CCFG_PCIDIVMODE_6 0x00001800 - -#define TX4937_CCFG_PCIDIVMODE_MASK 0x00001c00 -#define TX4937_CCFG_PCIDIVMODE_8 0x00000000 -#define TX4937_CCFG_PCIDIVMODE_4 0x00000400 -#define TX4937_CCFG_PCIDIVMODE_9 0x00000800 -#define TX4937_CCFG_PCIDIVMODE_4_5 0x00000c00 -#define TX4937_CCFG_PCIDIVMODE_10 0x00001000 -#define TX4937_CCFG_PCIDIVMODE_5 0x00001400 -#define TX4937_CCFG_PCIDIVMODE_11 0x00001800 -#define TX4937_CCFG_PCIDIVMODE_5_5 0x00001c00 +#define TX4927_CCFG_SYSSP_MASK 0x000000c0 +#define TX4927_CCFG_ENDIAN 0x00000004 +#define TX4927_CCFG_HALT 0x00000002 +#define TX4927_CCFG_ACEHOLD 0x00000001 +#define TX4927_CCFG_W1CBITS (TX4927_CCFG_WDRST | TX4927_CCFG_BEOW) /* PCFG : Pin Configuration */ +#define TX4927_PCFG_SDCLKDLY_MASK 0x30000000 +#define TX4927_PCFG_SDCLKDLY(d) ((d)<<28) +#define TX4927_PCFG_SYSCLKEN 0x08000000 +#define TX4927_PCFG_SDCLKEN_ALL 0x07800000 +#define TX4927_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) #define TX4927_PCFG_PCICLKEN_ALL 0x003f0000 #define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) +#define TX4927_PCFG_SEL2 0x00000200 +#define TX4927_PCFG_SEL1 0x00000100 +#define TX4927_PCFG_DMASEL_ALL 0x000000ff +#define TX4927_PCFG_DMASEL0_MASK 0x00000003 +#define TX4927_PCFG_DMASEL1_MASK 0x0000000c +#define TX4927_PCFG_DMASEL2_MASK 0x00000030 +#define TX4927_PCFG_DMASEL3_MASK 0x000000c0 +#define TX4927_PCFG_DMASEL0_DRQ0 0x00000000 +#define TX4927_PCFG_DMASEL0_SIO1 0x00000001 +#define TX4927_PCFG_DMASEL0_ACL0 0x00000002 +#define TX4927_PCFG_DMASEL0_ACL2 0x00000003 +#define TX4927_PCFG_DMASEL1_DRQ1 0x00000000 +#define TX4927_PCFG_DMASEL1_SIO1 0x00000004 +#define TX4927_PCFG_DMASEL1_ACL1 0x00000008 +#define TX4927_PCFG_DMASEL1_ACL3 0x0000000c +#define TX4927_PCFG_DMASEL2_DRQ2 0x00000000 /* SEL2=0 */ +#define TX4927_PCFG_DMASEL2_SIO0 0x00000010 /* SEL2=0 */ +#define TX4927_PCFG_DMASEL2_ACL1 0x00000000 /* SEL2=1 */ +#define TX4927_PCFG_DMASEL2_ACL2 0x00000020 /* SEL2=1 */ +#define TX4927_PCFG_DMASEL2_ACL0 0x00000030 /* SEL2=1 */ +#define TX4927_PCFG_DMASEL3_DRQ3 0x00000000 +#define TX4927_PCFG_DMASEL3_SIO0 0x00000040 +#define TX4927_PCFG_DMASEL3_ACL3 0x00000080 +#define TX4927_PCFG_DMASEL3_ACL1 0x000000c0 /* CLKCTR : Clock Control */ +#define TX4927_CLKCTR_ACLCKD 0x02000000 +#define TX4927_CLKCTR_PIOCKD 0x01000000 +#define TX4927_CLKCTR_DMACKD 0x00800000 #define TX4927_CLKCTR_PCICKD 0x00400000 +#define TX4927_CLKCTR_TM0CKD 0x00100000 +#define TX4927_CLKCTR_TM1CKD 0x00080000 +#define TX4927_CLKCTR_TM2CKD 0x00040000 +#define TX4927_CLKCTR_SIO0CKD 0x00020000 +#define TX4927_CLKCTR_SIO1CKD 0x00010000 +#define TX4927_CLKCTR_ACLRST 0x00000200 +#define TX4927_CLKCTR_PIORST 0x00000100 +#define TX4927_CLKCTR_DMARST 0x00000080 #define TX4927_CLKCTR_PCIRST 0x00000040 - -#ifndef _LANGUAGE_ASSEMBLY +#define TX4927_CLKCTR_TM0RST 0x00000010 +#define TX4927_CLKCTR_TM1RST 0x00000008 +#define TX4927_CLKCTR_TM2RST 0x00000004 +#define TX4927_CLKCTR_SIO0RST 0x00000002 +#define TX4927_CLKCTR_SIO1RST 0x00000001 #define tx4927_sdramcptr ((struct tx4927_sdramc_reg *)TX4927_SDRAMC_REG) -#define tx4927_pcicptr ((struct tx4927_pcic_reg *)TX4927_PCIC_REG) -#define tx4927_ccfgptr ((struct tx4927_ccfg_reg *)TX4927_CCFG_REG) +#define tx4927_pcicptr \ + ((struct tx4927_pcic_reg __iomem *)TX4927_PCIC_REG) +#define tx4927_ccfgptr \ + ((struct tx4927_ccfg_reg __iomem *)TX4927_CCFG_REG) #define tx4927_ebuscptr ((struct tx4927_ebusc_reg *)TX4927_EBUSC_REG) -#endif /* _LANGUAGE_ASSEMBLY */ +/* utilities */ +static inline void txx9_clear64(__u64 __iomem *adr, __u64 bits) +{ +#ifdef CONFIG_32BIT + unsigned long flags; + local_irq_save(flags); +#endif + ____raw_writeq(____raw_readq(adr) & ~bits, adr); +#ifdef CONFIG_32BIT + local_irq_restore(flags); +#endif +} +static inline void txx9_set64(__u64 __iomem *adr, __u64 bits) +{ +#ifdef CONFIG_32BIT + unsigned long flags; + local_irq_save(flags); +#endif + ____raw_writeq(____raw_readq(adr) | bits, adr); +#ifdef CONFIG_32BIT + local_irq_restore(flags); +#endif +} + +/* These functions are not interrupt safe. */ +static inline void tx4927_ccfg_clear(__u64 bits) +{ + ____raw_writeq(____raw_readq(&tx4927_ccfgptr->ccfg) + & ~(TX4927_CCFG_W1CBITS | bits), + &tx4927_ccfgptr->ccfg); +} +static inline void tx4927_ccfg_set(__u64 bits) +{ + ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg) + & ~TX4927_CCFG_W1CBITS) | bits, + &tx4927_ccfgptr->ccfg); +} +static inline void tx4927_ccfg_change(__u64 change, __u64 new) +{ + ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg) + & ~(TX4927_CCFG_W1CBITS | change)) | + new, + &tx4927_ccfgptr->ccfg); +} + +int tx4927_report_pciclk(void); +int tx4927_pciclk66_setup(void); #endif /* __ASM_TXX9_TX4927_H */ diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h new file mode 100644 index 000000000000..d61c3d09c4a2 --- /dev/null +++ b/include/asm-mips/txx9/tx4927pcic.h @@ -0,0 +1,199 @@ +/* + * include/asm-mips/txx9/tx4927pcic.h + * TX4927 PCI controller definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9_TX4927PCIC_H +#define __ASM_TXX9_TX4927PCIC_H + +#include + +struct tx4927_pcic_reg { + u32 pciid; + u32 pcistatus; + u32 pciccrev; + u32 pcicfg1; + u32 p2gm0plbase; /* +10 */ + u32 p2gm0pubase; + u32 p2gm1plbase; + u32 p2gm1pubase; + u32 p2gm2pbase; /* +20 */ + u32 p2giopbase; + u32 unused0; + u32 pcisid; + u32 unused1; /* +30 */ + u32 pcicapptr; + u32 unused2; + u32 pcicfg2; + u32 g2ptocnt; /* +40 */ + u32 unused3[15]; + u32 g2pstatus; /* +80 */ + u32 g2pmask; + u32 pcisstatus; + u32 pcimask; + u32 p2gcfg; /* +90 */ + u32 p2gstatus; + u32 p2gmask; + u32 p2gccmd; + u32 unused4[24]; /* +a0 */ + u32 pbareqport; /* +100 */ + u32 pbacfg; + u32 pbastatus; + u32 pbamask; + u32 pbabm; /* +110 */ + u32 pbacreq; + u32 pbacgnt; + u32 pbacstate; + u64 g2pmgbase[3]; /* +120 */ + u64 g2piogbase; + u32 g2pmmask[3]; /* +140 */ + u32 g2piomask; + u64 g2pmpbase[3]; /* +150 */ + u64 g2piopbase; + u32 pciccfg; /* +170 */ + u32 pcicstatus; + u32 pcicmask; + u32 unused5; + u64 p2gmgbase[3]; /* +180 */ + u64 p2giogbase; + u32 g2pcfgadrs; /* +1a0 */ + u32 g2pcfgdata; + u32 unused6[8]; + u32 g2pintack; + u32 g2pspc; + u32 unused7[12]; /* +1d0 */ + u64 pdmca; /* +200 */ + u64 pdmga; + u64 pdmpa; + u64 pdmctr; + u64 pdmcfg; /* +220 */ + u64 pdmsts; +}; + +/* bits for PCICMD */ +/* see PCI_COMMAND_XXX in linux/pci_regs.h */ + +/* bits for PCISTAT */ +/* see PCI_STATUS_XXX in linux/pci_regs.h */ + +/* bits for IOBA/MBA */ +/* see PCI_BASE_ADDRESS_XXX in linux/pci_regs.h */ + +/* bits for G2PSTATUS/G2PMASK */ +#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003 +#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002 +#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001 + +/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci_regs.h */ +#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900 + +/* bits for PBACFG */ +#define TX4927_PCIC_PBACFG_FIXPA 0x00000008 +#define TX4927_PCIC_PBACFG_RPBA 0x00000004 +#define TX4927_PCIC_PBACFG_PBAEN 0x00000002 +#define TX4927_PCIC_PBACFG_BMCEN 0x00000001 + +/* bits for PBASTATUS/PBAMASK */ +#define TX4927_PCIC_PBASTATUS_ALL 0x00000001 +#define TX4927_PCIC_PBASTATUS_BM 0x00000001 + +/* bits for G2PMnGBASE */ +#define TX4927_PCIC_G2PMnGBASE_BSDIS 0x0000002000000000ULL +#define TX4927_PCIC_G2PMnGBASE_ECHG 0x0000001000000000ULL + +/* bits for G2PIOGBASE */ +#define TX4927_PCIC_G2PIOGBASE_BSDIS 0x0000002000000000ULL +#define TX4927_PCIC_G2PIOGBASE_ECHG 0x0000001000000000ULL + +/* bits for PCICSTATUS/PCICMASK */ +#define TX4927_PCIC_PCICSTATUS_ALL 0x000007b8 +#define TX4927_PCIC_PCICSTATUS_PME 0x00000400 +#define TX4927_PCIC_PCICSTATUS_TLB 0x00000200 +#define TX4927_PCIC_PCICSTATUS_NIB 0x00000100 +#define TX4927_PCIC_PCICSTATUS_ZIB 0x00000080 +#define TX4927_PCIC_PCICSTATUS_PERR 0x00000020 +#define TX4927_PCIC_PCICSTATUS_SERR 0x00000010 +#define TX4927_PCIC_PCICSTATUS_GBE 0x00000008 +#define TX4927_PCIC_PCICSTATUS_IWB 0x00000002 +#define TX4927_PCIC_PCICSTATUS_E2PDONE 0x00000001 + +/* bits for PCICCFG */ +#define TX4927_PCIC_PCICCFG_GBWC_MASK 0x0fff0000 +#define TX4927_PCIC_PCICCFG_HRST 0x00000800 +#define TX4927_PCIC_PCICCFG_SRST 0x00000400 +#define TX4927_PCIC_PCICCFG_IRBER 0x00000200 +#define TX4927_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch)) +#define TX4927_PCIC_PCICCFG_G2PM0EN 0x00000100 +#define TX4927_PCIC_PCICCFG_G2PM1EN 0x00000080 +#define TX4927_PCIC_PCICCFG_G2PM2EN 0x00000040 +#define TX4927_PCIC_PCICCFG_G2PIOEN 0x00000020 +#define TX4927_PCIC_PCICCFG_TCAR 0x00000010 +#define TX4927_PCIC_PCICCFG_ICAEN 0x00000008 + +/* bits for P2GMnGBASE */ +#define TX4927_PCIC_P2GMnGBASE_TMEMEN 0x0000004000000000ULL +#define TX4927_PCIC_P2GMnGBASE_TBSDIS 0x0000002000000000ULL +#define TX4927_PCIC_P2GMnGBASE_TECHG 0x0000001000000000ULL + +/* bits for P2GIOGBASE */ +#define TX4927_PCIC_P2GIOGBASE_TIOEN 0x0000004000000000ULL +#define TX4927_PCIC_P2GIOGBASE_TBSDIS 0x0000002000000000ULL +#define TX4927_PCIC_P2GIOGBASE_TECHG 0x0000001000000000ULL + +#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) +#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32) + +/* bits for PDMCFG */ +#define TX4927_PCIC_PDMCFG_RSTFIFO 0x00200000 +#define TX4927_PCIC_PDMCFG_EXFER 0x00100000 +#define TX4927_PCIC_PDMCFG_REQDLY_MASK 0x00003800 +#define TX4927_PCIC_PDMCFG_REQDLY_NONE (0 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_16 (1 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_32 (2 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_64 (3 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_128 (4 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_256 (5 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_512 (6 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_1024 (7 << 11) +#define TX4927_PCIC_PDMCFG_ERRIE 0x00000400 +#define TX4927_PCIC_PDMCFG_NCCMPIE 0x00000200 +#define TX4927_PCIC_PDMCFG_NTCMPIE 0x00000100 +#define TX4927_PCIC_PDMCFG_CHNEN 0x00000080 +#define TX4927_PCIC_PDMCFG_XFRACT 0x00000040 +#define TX4927_PCIC_PDMCFG_BSWAP 0x00000020 +#define TX4927_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c +#define TX4927_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000 +#define TX4927_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004 +#define TX4927_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008 +#define TX4927_PCIC_PDMCFG_XFRDIRC 0x00000002 +#define TX4927_PCIC_PDMCFG_CHRST 0x00000001 + +/* bits for PDMSTS */ +#define TX4927_PCIC_PDMSTS_REQCNT_MASK 0x3f000000 +#define TX4927_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000 +#define TX4927_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000 +#define TX4927_PCIC_PDMSTS_FIFORP_MASK 0x00030000 +#define TX4927_PCIC_PDMSTS_ERRINT 0x00000800 +#define TX4927_PCIC_PDMSTS_DONEINT 0x00000400 +#define TX4927_PCIC_PDMSTS_CHNEN 0x00000200 +#define TX4927_PCIC_PDMSTS_XFRACT 0x00000100 +#define TX4927_PCIC_PDMSTS_ACCMP 0x00000080 +#define TX4927_PCIC_PDMSTS_NCCMP 0x00000040 +#define TX4927_PCIC_PDMSTS_NTCMP 0x00000020 +#define TX4927_PCIC_PDMSTS_CFGERR 0x00000008 +#define TX4927_PCIC_PDMSTS_PCIERR 0x00000004 +#define TX4927_PCIC_PDMSTS_CHNERR 0x00000002 +#define TX4927_PCIC_PDMSTS_DATAERR 0x00000001 +#define TX4927_PCIC_PDMSTS_ALL_CMP 0x000000e0 +#define TX4927_PCIC_PDMSTS_ALL_ERR 0x0000000f + +struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr( + struct pci_controller *channel); +void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, + struct pci_controller *channel, int extarb); +void tx4927_report_pcic_status(void); + +#endif /* __ASM_TXX9_TX4927PCIC_H */ diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h index 7f9cfef1c6d2..0bb891993b08 100644 --- a/include/asm-mips/txx9/tx4938.h +++ b/include/asm-mips/txx9/tx4938.h @@ -12,6 +12,9 @@ #ifndef __ASM_TXX9_TX4938_H #define __ASM_TXX9_TX4938_H +/* some controllers are compatible with 4927 */ +#include + #define tx4938_read_nfmc(addr) (*(volatile unsigned int *)(addr)) #define tx4938_write_nfmc(b, addr) (*(volatile unsigned int *)(addr)) = (b) @@ -51,9 +54,6 @@ #define TX4938_ACLC_REG (TX4938_REG_BASE + 0xf700) #define TX4938_SPI_REG (TX4938_REG_BASE + 0xf800) -#ifdef __ASSEMBLY__ -#define _CONST64(c) c -#else #define _CONST64(c) c##ull #include @@ -113,68 +113,6 @@ struct tx4938_dma_reg { endian_def_l2(unused0, mcr); }; -struct tx4938_pcic_reg { - volatile unsigned long pciid; - volatile unsigned long pcistatus; - volatile unsigned long pciccrev; - volatile unsigned long pcicfg1; - volatile unsigned long p2gm0plbase; /* +10 */ - volatile unsigned long p2gm0pubase; - volatile unsigned long p2gm1plbase; - volatile unsigned long p2gm1pubase; - volatile unsigned long p2gm2pbase; /* +20 */ - volatile unsigned long p2giopbase; - volatile unsigned long unused0; - volatile unsigned long pcisid; - volatile unsigned long unused1; /* +30 */ - volatile unsigned long pcicapptr; - volatile unsigned long unused2; - volatile unsigned long pcicfg2; - volatile unsigned long g2ptocnt; /* +40 */ - volatile unsigned long unused3[15]; - volatile unsigned long g2pstatus; /* +80 */ - volatile unsigned long g2pmask; - volatile unsigned long pcisstatus; - volatile unsigned long pcimask; - volatile unsigned long p2gcfg; /* +90 */ - volatile unsigned long p2gstatus; - volatile unsigned long p2gmask; - volatile unsigned long p2gccmd; - volatile unsigned long unused4[24]; /* +a0 */ - volatile unsigned long pbareqport; /* +100 */ - volatile unsigned long pbacfg; - volatile unsigned long pbastatus; - volatile unsigned long pbamask; - volatile unsigned long pbabm; /* +110 */ - volatile unsigned long pbacreq; - volatile unsigned long pbacgnt; - volatile unsigned long pbacstate; - volatile unsigned long long g2pmgbase[3]; /* +120 */ - volatile unsigned long long g2piogbase; - volatile unsigned long g2pmmask[3]; /* +140 */ - volatile unsigned long g2piomask; - volatile unsigned long long g2pmpbase[3]; /* +150 */ - volatile unsigned long long g2piopbase; - volatile unsigned long pciccfg; /* +170 */ - volatile unsigned long pcicstatus; - volatile unsigned long pcicmask; - volatile unsigned long unused5; - volatile unsigned long long p2gmgbase[3]; /* +180 */ - volatile unsigned long long p2giogbase; - volatile unsigned long g2pcfgadrs; /* +1a0 */ - volatile unsigned long g2pcfgdata; - volatile unsigned long unused6[8]; - volatile unsigned long g2pintack; - volatile unsigned long g2pspc; - volatile unsigned long unused7[12]; /* +1d0 */ - volatile unsigned long long pdmca; /* +200 */ - volatile unsigned long long pdmga; - volatile unsigned long long pdmpa; - volatile unsigned long long pdmctr; - volatile unsigned long long pdmcfg; /* +220 */ - volatile unsigned long long pdmsts; -}; - struct tx4938_aclc_reg { volatile unsigned long acctlen; volatile unsigned long acctldis; @@ -262,18 +200,18 @@ struct tx4938_sramc_reg { }; struct tx4938_ccfg_reg { - volatile unsigned long long ccfg; - volatile unsigned long long crir; - volatile unsigned long long pcfg; - volatile unsigned long long tear; - volatile unsigned long long clkctr; - volatile unsigned long long unused0; - volatile unsigned long long garbc; - volatile unsigned long long unused1; - volatile unsigned long long unused2; - volatile unsigned long long ramp; - volatile unsigned long long unused3; - volatile unsigned long long jmpadr; + u64 ccfg; + u64 crir; + u64 pcfg; + u64 toea; + u64 clkctr; + u64 unused0; + u64 garbc; + u64 unused1; + u64 unused2; + u64 ramp; + u64 unused3; + u64 jmpadr; }; #undef endian_def_l2 @@ -282,8 +220,6 @@ struct tx4938_ccfg_reg { #undef endian_def_b2s #undef endian_def_b4 -#endif /* __ASSEMBLY__ */ - /* * NDFMC */ @@ -360,7 +296,7 @@ struct tx4938_ccfg_reg { #define TX4938_CCFG_BEOW 0x00010000 #define TX4938_CCFG_WR 0x00008000 #define TX4938_CCFG_TOE 0x00004000 -#define TX4938_CCFG_PCIXARB 0x00002000 +#define TX4938_CCFG_PCIARB 0x00002000 #define TX4938_CCFG_PCIDIVMODE_MASK 0x00001c00 #define TX4938_CCFG_PCIDIVMODE_4 (0x1 << 10) #define TX4938_CCFG_PCIDIVMODE_4_5 (0x3 << 10) @@ -436,110 +372,6 @@ struct tx4938_ccfg_reg { #define TX4938_CLKCTR_SIO0RST 0x00000002 #define TX4938_CLKCTR_SIO1RST 0x00000001 -/* bits for G2PSTATUS/G2PMASK */ -#define TX4938_PCIC_G2PSTATUS_ALL 0x00000003 -#define TX4938_PCIC_G2PSTATUS_TTOE 0x00000002 -#define TX4938_PCIC_G2PSTATUS_RTOE 0x00000001 - -/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */ -#define TX4938_PCIC_PCISTATUS_ALL 0x0000f900 - -/* bits for PBACFG */ -#define TX4938_PCIC_PBACFG_FIXPA 0x00000008 -#define TX4938_PCIC_PBACFG_RPBA 0x00000004 -#define TX4938_PCIC_PBACFG_PBAEN 0x00000002 -#define TX4938_PCIC_PBACFG_BMCEN 0x00000001 - -/* bits for G2PMnGBASE */ -#define TX4938_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4938_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for G2PIOGBASE */ -#define TX4938_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4938_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for PCICSTATUS/PCICMASK */ -#define TX4938_PCIC_PCICSTATUS_ALL 0x000007b8 -#define TX4938_PCIC_PCICSTATUS_PME 0x00000400 -#define TX4938_PCIC_PCICSTATUS_TLB 0x00000200 -#define TX4938_PCIC_PCICSTATUS_NIB 0x00000100 -#define TX4938_PCIC_PCICSTATUS_ZIB 0x00000080 -#define TX4938_PCIC_PCICSTATUS_PERR 0x00000020 -#define TX4938_PCIC_PCICSTATUS_SERR 0x00000010 -#define TX4938_PCIC_PCICSTATUS_GBE 0x00000008 -#define TX4938_PCIC_PCICSTATUS_IWB 0x00000002 -#define TX4938_PCIC_PCICSTATUS_E2PDONE 0x00000001 - -/* bits for PCICCFG */ -#define TX4938_PCIC_PCICCFG_GBWC_MASK 0x0fff0000 -#define TX4938_PCIC_PCICCFG_HRST 0x00000800 -#define TX4938_PCIC_PCICCFG_SRST 0x00000400 -#define TX4938_PCIC_PCICCFG_IRBER 0x00000200 -#define TX4938_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch)) -#define TX4938_PCIC_PCICCFG_G2PM0EN 0x00000100 -#define TX4938_PCIC_PCICCFG_G2PM1EN 0x00000080 -#define TX4938_PCIC_PCICCFG_G2PM2EN 0x00000040 -#define TX4938_PCIC_PCICCFG_G2PIOEN 0x00000020 -#define TX4938_PCIC_PCICCFG_TCAR 0x00000010 -#define TX4938_PCIC_PCICCFG_ICAEN 0x00000008 - -/* bits for P2GMnGBASE */ -#define TX4938_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000) -#define TX4938_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4938_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000) - -/* bits for P2GIOGBASE */ -#define TX4938_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000) -#define TX4938_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4938_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000) - -#define TX4938_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) -#define TX4938_PCIC_MAX_DEVNU TX4938_PCIC_IDSEL_AD_TO_SLOT(32) - -/* bits for PDMCFG */ -#define TX4938_PCIC_PDMCFG_RSTFIFO 0x00200000 -#define TX4938_PCIC_PDMCFG_EXFER 0x00100000 -#define TX4938_PCIC_PDMCFG_REQDLY_MASK 0x00003800 -#define TX4938_PCIC_PDMCFG_REQDLY_NONE (0 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_16 (1 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_32 (2 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_64 (3 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_128 (4 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_256 (5 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_512 (6 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_1024 (7 << 11) -#define TX4938_PCIC_PDMCFG_ERRIE 0x00000400 -#define TX4938_PCIC_PDMCFG_NCCMPIE 0x00000200 -#define TX4938_PCIC_PDMCFG_NTCMPIE 0x00000100 -#define TX4938_PCIC_PDMCFG_CHNEN 0x00000080 -#define TX4938_PCIC_PDMCFG_XFRACT 0x00000040 -#define TX4938_PCIC_PDMCFG_BSWAP 0x00000020 -#define TX4938_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c -#define TX4938_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000 -#define TX4938_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004 -#define TX4938_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008 -#define TX4938_PCIC_PDMCFG_XFRDIRC 0x00000002 -#define TX4938_PCIC_PDMCFG_CHRST 0x00000001 - -/* bits for PDMSTS */ -#define TX4938_PCIC_PDMSTS_REQCNT_MASK 0x3f000000 -#define TX4938_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000 -#define TX4938_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000 -#define TX4938_PCIC_PDMSTS_FIFORP_MASK 0x00030000 -#define TX4938_PCIC_PDMSTS_ERRINT 0x00000800 -#define TX4938_PCIC_PDMSTS_DONEINT 0x00000400 -#define TX4938_PCIC_PDMSTS_CHNEN 0x00000200 -#define TX4938_PCIC_PDMSTS_XFRACT 0x00000100 -#define TX4938_PCIC_PDMSTS_ACCMP 0x00000080 -#define TX4938_PCIC_PDMSTS_NCCMP 0x00000040 -#define TX4938_PCIC_PDMSTS_NTCMP 0x00000020 -#define TX4938_PCIC_PDMSTS_CFGERR 0x00000008 -#define TX4938_PCIC_PDMSTS_PCIERR 0x00000004 -#define TX4938_PCIC_PDMSTS_CHNERR 0x00000002 -#define TX4938_PCIC_PDMSTS_DATAERR 0x00000001 -#define TX4938_PCIC_PDMSTS_ALL_CMP 0x000000e0 -#define TX4938_PCIC_PDMSTS_ALL_ERR 0x0000000f - /* * DMA */ @@ -595,15 +427,15 @@ struct tx4938_ccfg_reg { #define TX4938_DMA_CSR_DESERR 0x00000002 #define TX4938_DMA_CSR_SORERR 0x00000001 -#ifndef __ASSEMBLY__ - #define tx4938_sdramcptr ((struct tx4938_sdramc_reg *)TX4938_SDRAMC_REG) #define tx4938_ebuscptr ((struct tx4938_ebusc_reg *)TX4938_EBUSC_REG) #define tx4938_dmaptr(ch) ((struct tx4938_dma_reg *)TX4938_DMA_REG(ch)) #define tx4938_ndfmcptr ((struct tx4938_ndfmc_reg *)TX4938_NDFMC_REG) -#define tx4938_pcicptr ((struct tx4938_pcic_reg *)TX4938_PCIC_REG) -#define tx4938_pcic1ptr ((struct tx4938_pcic_reg *)TX4938_PCIC1_REG) -#define tx4938_ccfgptr ((struct tx4938_ccfg_reg *)TX4938_CCFG_REG) +#define tx4938_pcicptr tx4927_pcicptr +#define tx4938_pcic1ptr \ + ((struct tx4927_pcic_reg __iomem *)TX4938_PCIC1_REG) +#define tx4938_ccfgptr \ + ((struct tx4938_ccfg_reg __iomem *)TX4938_CCFG_REG) #define tx4938_sioptr(ch) ((struct tx4938_sio_reg *)TX4938_SIO_REG(ch)) #define tx4938_pioptr ((struct txx9_pio_reg __iomem *)TX4938_PIO_REG) #define tx4938_aclcptr ((struct tx4938_aclc_reg *)TX4938_ACLC_REG) @@ -611,17 +443,25 @@ struct tx4938_ccfg_reg { #define tx4938_sramcptr ((struct tx4938_sramc_reg *)TX4938_SRAMC_REG) -#define TX4938_REV_MAJ_MIN() ((unsigned long)tx4938_ccfgptr->crir & 0x00ff) -#define TX4938_REV_PCODE() ((unsigned long)tx4938_ccfgptr->crir >> 16) +#define TX4938_REV_PCODE() \ + ((__u32)__raw_readq(&tx4938_ccfgptr->crir) >> 16) + +#define tx4938_ccfg_clear(bits) tx4927_ccfg_clear(bits) +#define tx4938_ccfg_set(bits) tx4927_ccfg_set(bits) +#define tx4938_ccfg_change(change, new) tx4927_ccfg_change(change, new) #define TX4938_SDRAMC_BA(ch) ((tx4938_sdramcptr->cr[ch] >> 49) << 21) #define TX4938_SDRAMC_SIZE(ch) (((tx4938_sdramcptr->cr[ch] >> 33) + 1) << 21) +#define TX4938_EBUSC_CR(ch) __raw_readq(&tx4938_ebuscptr->cr[(ch)]) #define TX4938_EBUSC_BA(ch) ((tx4938_ebuscptr->cr[ch] >> 48) << 20) #define TX4938_EBUSC_SIZE(ch) \ (0x00100000 << ((unsigned long)(tx4938_ebuscptr->cr[ch] >> 8) & 0xf)) - -#endif /* !__ASSEMBLY__ */ +int tx4938_report_pciclk(void); +void tx4938_report_pci1clk(void); +int tx4938_pciclk66_setup(void); +struct pci_dev; +int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot); #endif -- cgit v1.2.3 From 766891565bdaf605ea4aebe3e75de77e848254d0 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 11 Jul 2008 00:33:21 +0900 Subject: [MIPS] TXx9: Update defconfigs Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/configs/jmr3927_defconfig | 180 ++++++++++++++++++++----------- arch/mips/configs/rbhma4200_defconfig | 153 +++++++++++++++----------- arch/mips/configs/rbhma4500_defconfig | 196 ++++++++++++++++++++++------------ 3 files changed, 340 insertions(+), 189 deletions(-) diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 92000a3a871d..ab16e67ff08b 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc1 -# Thu Aug 2 23:07:36 2007 +# Linux kernel version: 2.6.26-rc9 +# Fri Jul 11 00:25:19 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set @@ -24,6 +26,7 @@ CONFIG_MIPS=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -38,18 +41,27 @@ CONFIG_TOSHIBA_JMR3927=y # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set # CONFIG_WR_PPMC is not set +# CONFIG_TOSHIBA_FPCIB0 is not set +CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_TXX9=y +CONFIG_GPIO_TXX9=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y @@ -102,13 +114,20 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -142,18 +161,25 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -166,6 +192,14 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -187,19 +221,18 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y -# -# PCCARD (PCMCIA/CardBus) support -# - # # Executable file formats # @@ -210,6 +243,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -243,25 +277,21 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set +# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -269,6 +299,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -277,6 +308,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -305,6 +337,7 @@ CONFIG_BLK_DEV=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -316,10 +349,6 @@ CONFIG_BLK_DEV=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # @@ -327,7 +356,7 @@ CONFIG_BLK_DEV=y # # -# An alternative FireWire stack is available with EXPERIMENTAL=y +# A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -337,10 +366,27 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=y +# CONFIG_MII is not set # CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set @@ -349,6 +395,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -356,13 +406,13 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_TC35815=y -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -377,6 +427,7 @@ CONFIG_TC35815=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -398,7 +449,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -422,6 +472,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set @@ -429,7 +480,6 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set -# CONFIG_MOXA_SMARTIO_NEW is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set @@ -461,22 +511,30 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_HAVE_GPIO_LIB=y # -# SPI support +# GPIO Support +# + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -492,30 +550,47 @@ CONFIG_TXX9_WDT=y # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Sound @@ -524,7 +599,9 @@ CONFIG_TXX9_WDT=y # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -549,9 +626,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_DS1742=y +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -559,23 +637,6 @@ CONFIG_RTC_DRV_DS1742=y # # on-CPU RTC drivers # - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -588,12 +649,10 @@ CONFIG_RTC_DRV_DS1742=y # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -620,7 +679,7 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -628,17 +687,15 @@ CONFIG_RAMFS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -654,10 +711,6 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set # @@ -665,13 +718,15 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" # @@ -685,6 +740,7 @@ CONFIG_CMDLINE="" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig index f89482a2aa6b..e0af6a9f9f0c 100644 --- a/arch/mips/configs/rbhma4200_defconfig +++ b/arch/mips/configs/rbhma4200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc1 -# Thu Aug 2 22:55:57 2007 +# Linux kernel version: 2.6.26-rc9 +# Thu Jul 10 23:52:40 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set @@ -24,6 +26,7 @@ CONFIG_MIPS=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -39,17 +42,26 @@ CONFIG_TOSHIBA_RBTX4927=y # CONFIG_TOSHIBA_RBTX4938 is not set # CONFIG_WR_PPMC is not set # CONFIG_TOSHIBA_FPCIB0 is not set +CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y +CONFIG_PCI_TX4927=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_TXX9=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set @@ -107,13 +119,20 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -148,19 +167,26 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set CONFIG_ANON_INODES=y @@ -173,9 +199,18 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set @@ -197,19 +232,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set CONFIG_MMU=y -# -# PCCARD (PCMCIA/CardBus) support -# - # # Executable file formats # @@ -220,6 +254,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -254,26 +289,22 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set +# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -281,6 +312,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -289,6 +321,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -317,10 +350,11 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -332,10 +366,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # @@ -343,7 +373,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # -# An alternative FireWire stack is available with EXPERIMENTAL=y +# A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -353,6 +383,7 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -366,7 +397,12 @@ CONFIG_NET_ETHERNET=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NE2000=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set +# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -376,6 +412,7 @@ CONFIG_NE2000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -405,6 +442,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -428,22 +466,17 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -451,7 +484,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_TXX9_WDT=m +CONFIG_TXX9_WDT=y # # PCI-based Watchdog Cards @@ -459,30 +492,47 @@ CONFIG_TXX9_WDT=m # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Sound @@ -490,7 +540,9 @@ CONFIG_TXX9_WDT=m # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -515,9 +567,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_DS1742=y +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -525,23 +578,6 @@ CONFIG_RTC_DRV_DS1742=y # # on-CPU RTC drivers # - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -554,12 +590,10 @@ CONFIG_RTC_DRV_DS1742=y CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -588,7 +622,7 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -596,18 +630,16 @@ CONFIG_RAMFS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -624,10 +656,6 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set # @@ -635,13 +663,15 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" CONFIG_SYS_SUPPORTS_KGDB=y @@ -656,6 +686,7 @@ CONFIG_SYS_SUPPORTS_KGDB=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig index 70cf69761673..50aa1b641360 100644 --- a/arch/mips/configs/rbhma4500_defconfig +++ b/arch/mips/configs/rbhma4500_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc1 -# Thu Aug 2 22:59:53 2007 +# Linux kernel version: 2.6.26-rc9 +# Thu Jul 10 23:53:27 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set @@ -24,6 +26,7 @@ CONFIG_MIPS=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -38,6 +41,8 @@ CONFIG_MIPS=y # CONFIG_TOSHIBA_RBTX4927 is not set CONFIG_TOSHIBA_RBTX4938=y # CONFIG_WR_PPMC is not set +# CONFIG_TOSHIBA_FPCIB0 is not set +CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y # # Multiplex Pin Select @@ -45,21 +50,30 @@ CONFIG_TOSHIBA_RBTX4938=y CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set +CONFIG_PCI_TX4927=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_TXX9=y +CONFIG_CSRC_R4K=y +CONFIG_GPIO_TXX9=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_CPU=y @@ -113,13 +127,20 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -154,19 +175,26 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set CONFIG_ANON_INODES=y @@ -179,9 +207,18 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set @@ -203,19 +240,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set CONFIG_MMU=y -# -# PCCARD (PCMCIA/CardBus) support -# - # # Executable file formats # @@ -226,6 +262,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -260,26 +297,22 @@ CONFIG_IP_PNP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set +# CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -287,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -295,6 +329,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -323,10 +358,11 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -338,10 +374,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # @@ -349,7 +381,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # -# An alternative FireWire stack is available with EXPERIMENTAL=y +# A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set @@ -359,10 +391,27 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=y +# CONFIG_MII is not set # CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set @@ -372,6 +421,10 @@ CONFIG_MII=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NE2000=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -379,13 +432,13 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_TC35815=y -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -400,6 +453,7 @@ CONFIG_TC35815=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -424,6 +478,7 @@ CONFIG_TC35815=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -447,17 +502,11 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -471,9 +520,25 @@ CONFIG_SPI_TXX9=y # CONFIG_SPI_AT25=y # CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -489,30 +554,47 @@ CONFIG_TXX9_WDT=m # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Sound @@ -520,7 +602,9 @@ CONFIG_TXX9_WDT=m # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -540,16 +624,18 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y # # SPI RTC drivers # -CONFIG_RTC_DRV_RS5C348=y # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +CONFIG_RTC_DRV_RS5C348=y # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -557,23 +643,6 @@ CONFIG_RTC_DRV_RS5C348=y # # on-CPU RTC drivers # - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -586,12 +655,10 @@ CONFIG_RTC_DRV_RS5C348=y CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -620,7 +687,7 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -628,18 +695,16 @@ CONFIG_RAMFS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -656,10 +721,6 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set # @@ -667,13 +728,15 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" CONFIG_SYS_SUPPORTS_KGDB=y @@ -688,6 +751,7 @@ CONFIG_SYS_SUPPORTS_KGDB=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set -- cgit v1.2.3 From edcaf1a6a77315562e9781245cc8e028c9a921dc Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 11 Jul 2008 23:27:54 +0900 Subject: [MIPS] TXx9: Make single kernel can support multiple boards Make single kernel can be used on RBTX4927/37/38. Also make some SoC-specific code independent from board-specific code. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 67 +------------- arch/mips/Makefile | 21 ++--- arch/mips/pci/Makefile | 9 +- arch/mips/pci/fixup-jmr3927.c | 8 +- arch/mips/pci/fixup-rbtx4927.c | 8 +- arch/mips/pci/fixup-rbtx4938.c | 11 +-- arch/mips/txx9/Kconfig | 82 ++++++++++++++++- arch/mips/txx9/generic/Makefile | 4 +- arch/mips/txx9/generic/irq_tx4927.c | 33 +------ arch/mips/txx9/generic/irq_tx4938.c | 31 +------ arch/mips/txx9/generic/pci.c | 11 +++ arch/mips/txx9/generic/setup.c | 169 ++++++++++++++++++++++++++++++++++++ arch/mips/txx9/jmr3927/Makefile | 2 +- arch/mips/txx9/jmr3927/init.c | 57 ------------ arch/mips/txx9/jmr3927/irq.c | 45 +++++----- arch/mips/txx9/jmr3927/prom.c | 46 +++------- arch/mips/txx9/jmr3927/setup.c | 54 +++++------- arch/mips/txx9/rbtx4927/irq.c | 57 ++++++------ arch/mips/txx9/rbtx4927/prom.c | 52 +---------- arch/mips/txx9/rbtx4927/setup.c | 78 ++++++++--------- arch/mips/txx9/rbtx4938/irq.c | 48 ++++++---- arch/mips/txx9/rbtx4938/prom.c | 49 +---------- arch/mips/txx9/rbtx4938/setup.c | 64 +++++--------- include/asm-mips/txx9/generic.h | 18 ++++ include/asm-mips/txx9/jmr3927.h | 5 ++ include/asm-mips/txx9/rbtx4927.h | 13 ++- include/asm-mips/txx9/rbtx4938.h | 36 ++------ include/asm-mips/txx9/tx4927.h | 19 ++-- include/asm-mips/txx9/tx4938.h | 8 +- 29 files changed, 520 insertions(+), 585 deletions(-) delete mode 100644 arch/mips/txx9/jmr3927/init.c diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 2ea6fff88811..72baa1a70fcb 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -550,66 +550,11 @@ config SNI_RM Technology and now in turn merged with Fujitsu. Say Y here to support this machine type. -config TOSHIBA_JMR3927 - bool "Toshiba JMR-TX3927 board" - select CEVT_TXX9 - select DMA_NONCOHERENT - select HW_HAS_PCI - select MIPS_TX3927 - select IRQ_TXX9 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX39XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ - select GPIO_TXX9 +config MACH_TX39XX + bool "Toshiba TX39 series based machines" -config TOSHIBA_RBTX4927 - bool "Toshiba RBTX49[23]7 board" - select CEVT_R4K - select CSRC_R4K - select CEVT_TXX9 - select DMA_NONCOHERENT - select HAS_TXX9_SERIAL - select HW_HAS_PCI - select IRQ_CPU - select IRQ_TXX9 - select PCI_TX4927 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ - help - This Toshiba board is based on the TX4927 processor. Say Y here to - support this machine type - -config TOSHIBA_RBTX4938 - bool "Toshiba RBTX4938 board" - select CEVT_R4K - select CSRC_R4K - select CEVT_TXX9 - select DMA_NONCOHERENT - select HAS_TXX9_SERIAL - select HW_HAS_PCI - select IRQ_CPU - select IRQ_TXX9 - select PCI_TX4927 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ - select GPIO_TXX9 - help - This Toshiba board is based on the TX4938 processor. Say Y here to - support this machine type +config MACH_TX49XX + bool "Toshiba TX49 series based machines" config WR_PPMC bool "Wind River PPMC board" @@ -887,10 +832,6 @@ config PCI_GT64XXX_PCI0 config NO_EXCEPT_FILL bool -config MIPS_TX3927 - bool - select HAS_TXX9_SERIAL - config MIPS_RM9122 bool select SERIAL_RM9000 diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 8e1e49c5186b..d319cd624135 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -550,30 +550,31 @@ load-$(CONFIG_SNI_RM) += 0xffffffff80030000 endif all-$(CONFIG_SNI_RM) := vmlinux.ecoff +# +# Common TXx9 +# +core-$(CONFIG_MACH_TX39XX) += arch/mips/txx9/generic/ +cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-jmr3927 +load-$(CONFIG_MACH_TX39XX) += 0xffffffff80050000 +core-$(CONFIG_MACH_TX49XX) += arch/mips/txx9/generic/ +cflags-$(CONFIG_MACH_TX49XX) += -Iinclude/asm-mips/mach-tx49xx +load-$(CONFIG_MACH_TX49XX) += 0xffffffff80100000 + # # Toshiba JMR-TX3927 board # -core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/txx9/jmr3927/ \ - arch/mips/txx9/generic/ -cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927 -load-$(CONFIG_TOSHIBA_JMR3927) += 0xffffffff80050000 +core-$(CONFIG_TOSHIBA_JMR3927) += arch/mips/txx9/jmr3927/ # # Toshiba RBTX4927 board or # Toshiba RBTX4937 board # core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/rbtx4927/ -core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/generic/ -cflags-$(CONFIG_TOSHIBA_RBTX4927) += -Iinclude/asm-mips/mach-tx49xx -load-$(CONFIG_TOSHIBA_RBTX4927) += 0xffffffff80020000 # # Toshiba RBTX4938 board # core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/ -core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/generic/ -cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx -load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000 cflags-y += -Iinclude/asm-mips/mach-generic drivers-$(CONFIG_PCI) += arch/mips/pci/ diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 908764878ac8..875b643438c0 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -11,11 +11,10 @@ obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o obj-$(CONFIG_PCI_GT64XXX_PCI0) += ops-gt64xxx_pci0.o obj-$(CONFIG_MIPS_MSC) += ops-msc.o obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o -obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o +obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o -obj-$(CONFIG_PCI_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o # @@ -44,8 +43,10 @@ obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o obj-$(CONFIG_TOSHIBA_JMR3927) += fixup-jmr3927.o -obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o pci-tx4927.o pci-tx4938.o -obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o pci-tx4938.o +obj-$(CONFIG_SOC_TX4927) += pci-tx4927.o +obj-$(CONFIG_SOC_TX4938) += pci-tx4938.o +obj-$(CONFIG_TOSHIBA_RBTX4927) += fixup-rbtx4927.o +obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-rbtx4938.o obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c index d5edaf21e088..0f1069527cba 100644 --- a/arch/mips/pci/fixup-jmr3927.c +++ b/arch/mips/pci/fixup-jmr3927.c @@ -31,7 +31,7 @@ #include #include -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +int __init jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq = pin; @@ -77,9 +77,3 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) irq = JMR3927_IRQ_ETHER0; return irq; } - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c index abab4852d158..321db265829c 100644 --- a/arch/mips/pci/fixup-rbtx4927.c +++ b/arch/mips/pci/fixup-rbtx4927.c @@ -36,7 +36,7 @@ #include #include -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +int __init rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char irq = pin; @@ -71,9 +71,3 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) } return irq; } - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/arch/mips/pci/fixup-rbtx4938.c b/arch/mips/pci/fixup-rbtx4938.c index 39c995830384..a80579af609b 100644 --- a/arch/mips/pci/fixup-rbtx4938.c +++ b/arch/mips/pci/fixup-rbtx4938.c @@ -13,7 +13,7 @@ #include #include -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +int __init rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq = tx4938_pcic1_map_irq(dev, slot); @@ -51,12 +51,3 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) } return irq; } - -/* - * Do platform specific device initialization at pci_enable_device() time - */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} - diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index b8cdb192543a..b92a134ef124 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -1,11 +1,89 @@ +config TOSHIBA_JMR3927 + bool "Toshiba JMR-TX3927 board" + depends on MACH_TX39XX + select SOC_TX3927 + +config TOSHIBA_RBTX4927 + bool "Toshiba RBTX49[23]7 board" + depends on MACH_TX49XX + select SOC_TX4927 + help + This Toshiba board is based on the TX4927 processor. Say Y here to + support this machine type + +config TOSHIBA_RBTX4938 + bool "Toshiba RBTX4938 board" + depends on MACH_TX49XX + select SOC_TX4938 + help + This Toshiba board is based on the TX4938 processor. Say Y here to + support this machine type + +config SOC_TX3927 + bool + select CEVT_TXX9 + select DMA_NONCOHERENT + select HAS_TXX9_SERIAL + select HW_HAS_PCI + select IRQ_TXX9 + select SWAP_IO_SPACE + select SYS_HAS_CPU_TX39XX + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_BIG_ENDIAN + select GENERIC_HARDIRQS_NO__DO_IRQ + select GPIO_TXX9 + +config SOC_TX4927 + bool + select CEVT_R4K + select CSRC_R4K + select CEVT_TXX9 + select DMA_NONCOHERENT + select HAS_TXX9_SERIAL + select HW_HAS_PCI + select IRQ_CPU + select IRQ_TXX9 + select PCI_TX4927 + select SWAP_IO_SPACE + select SYS_HAS_CPU_TX49XX + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB + select GENERIC_HARDIRQS_NO__DO_IRQ + select GPIO_TXX9 + +config SOC_TX4938 + bool + select CEVT_R4K + select CSRC_R4K + select CEVT_TXX9 + select DMA_NONCOHERENT + select HAS_TXX9_SERIAL + select HW_HAS_PCI + select IRQ_CPU + select IRQ_TXX9 + select PCI_TX4927 + select SWAP_IO_SPACE + select SYS_HAS_CPU_TX49XX + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_KGDB + select GENERIC_HARDIRQS_NO__DO_IRQ + select GPIO_TXX9 + config TOSHIBA_FPCIB0 bool "FPCIB0 Backplane Support" - depends on PCI && (SYS_HAS_CPU_TX49XX || SYS_HAS_CPU_TX39XX) + depends on PCI && (MACH_TX39XX || MACH_TX49XX) select I8259 config PICMG_PCI_BACKPLANE_DEFAULT bool "Support for PICMG PCI Backplane" - depends on PCI && (SYS_HAS_CPU_TX49XX || SYS_HAS_CPU_TX39XX) + depends on PCI && (MACH_TX39XX || MACH_TX49XX) default y if !TOSHIBA_FPCIB0 if TOSHIBA_RBTX4938 diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile index b80b6e072284..668fdaad6448 100644 --- a/arch/mips/txx9/generic/Makefile +++ b/arch/mips/txx9/generic/Makefile @@ -4,8 +4,8 @@ obj-y += setup.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_TOSHIBA_RBTX4927) += mem_tx4927.o irq_tx4927.o -obj-$(CONFIG_TOSHIBA_RBTX4938) += mem_tx4938.o irq_tx4938.o +obj-$(CONFIG_SOC_TX4927) += mem_tx4927.o irq_tx4927.o +obj-$(CONFIG_SOC_TX4938) += mem_tx4938.o irq_tx4938.o obj-$(CONFIG_TOSHIBA_FPCIB0) += smsc_fdc37m81x.o obj-$(CONFIG_KGDB) += dbgio.o diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c index 685ecc2ed551..6377bd8a9050 100644 --- a/arch/mips/txx9/generic/irq_tx4927.c +++ b/arch/mips/txx9/generic/irq_tx4927.c @@ -26,39 +26,12 @@ #include #include #include -#include -#ifdef CONFIG_TOSHIBA_RBTX4927 -#include -#endif +#include void __init tx4927_irq_init(void) { mips_cpu_irq_init(); txx9_irq_init(TX4927_IRC_REG); - set_irq_chained_handler(TX4927_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP7) /* cpu timer */ - do_IRQ(TX4927_IRQ_CPU_TIMER); - else if (pending & STATUSF_IP2) { /* tx4927 pic */ - int irq = txx9_irq(); -#ifdef CONFIG_TOSHIBA_RBTX4927 - if (irq == TX4927_IRQ_NEST_EXT_ON_PIC) - irq = toshiba_rbtx4927_irq_nested(irq); -#endif - if (unlikely(irq < 0)) { - spurious_interrupt(); - return; - } - do_IRQ(irq); - } else if (pending & STATUSF_IP0) /* user line 0 */ - do_IRQ(TX4927_IRQ_USER0); - else if (pending & STATUSF_IP1) /* user line 1 */ - do_IRQ(TX4927_IRQ_USER1); - else - spurious_interrupt(); + set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4927_IRC_INT, + handle_simple_irq); } diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c index 0886d9138818..5fc86c9c9d2f 100644 --- a/arch/mips/txx9/generic/irq_tx4938.c +++ b/arch/mips/txx9/generic/irq_tx4938.c @@ -14,35 +14,12 @@ #include #include #include -#include -#include +#include -void __init -tx4938_irq_init(void) +void __init tx4938_irq_init(void) { mips_cpu_irq_init(); txx9_irq_init(TX4938_IRC_REG); - set_irq_chained_handler(TX4938_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); -} - -int toshiba_rbtx4938_irq_nested(int irq); - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status(); - - if (pending & STATUSF_IP7) - do_IRQ(TX4938_IRQ_CPU_TIMER); - else if (pending & STATUSF_IP2) { - int irq = txx9_irq(); - if (irq == TX4938_IRQ_PIC_BEG + TX4938_IR_INT(0)) - irq = toshiba_rbtx4938_irq_nested(irq); - if (irq >= 0) - do_IRQ(irq); - else - spurious_interrupt(); - } else if (pending & STATUSF_IP1) - do_IRQ(TX4938_IRQ_USER1); - else if (pending & STATUSF_IP0) - do_IRQ(TX4938_IRQ_USER0); + set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4938_IRC_INT, + handle_simple_irq); } diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c index 8173faab99bb..0b92d8c13208 100644 --- a/arch/mips/txx9/generic/pci.c +++ b/arch/mips/txx9/generic/pci.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #ifdef CONFIG_TOSHIBA_FPCIB0 #include @@ -375,3 +376,13 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, #endif DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup); DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup); + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return txx9_board_vec->pci_map_irq(dev, slot, pin); +} diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 46a631177757..66ff74f80c6b 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -14,7 +14,16 @@ #include #include #include +#include +#include +#include +#include +#include +#include #include +#ifdef CONFIG_CPU_TX49XX +#include +#endif /* EBUSC settings of TX4927, etc. */ struct resource txx9_ce_res[8]; @@ -49,3 +58,163 @@ txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size) unsigned int txx9_master_clock; unsigned int txx9_cpu_clock; unsigned int txx9_gbus_clock; + + +/* Minimum CLK support */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "spi-baseclk")) + return (struct clk *)(txx9_gbus_clock / 2 / 4); + if (!strcmp(id, "imbus_clk")) + return (struct clk *)(txx9_gbus_clock / 2); + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return (unsigned long)clk; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + +extern struct txx9_board_vec jmr3927_vec; +extern struct txx9_board_vec rbtx4927_vec; +extern struct txx9_board_vec rbtx4937_vec; +extern struct txx9_board_vec rbtx4938_vec; + +/* board definitions */ +static struct txx9_board_vec *board_vecs[] __initdata = { +#ifdef CONFIG_TOSHIBA_JMR3927 + &jmr3927_vec, +#endif +#ifdef CONFIG_TOSHIBA_RBTX4927 + &rbtx4927_vec, + &rbtx4937_vec, +#endif +#ifdef CONFIG_TOSHIBA_RBTX4938 + &rbtx4938_vec, +#endif +}; +struct txx9_board_vec *txx9_board_vec __initdata; +static char txx9_system_type[32]; + +void __init prom_init_cmdline(void) +{ + int argc = (int)fw_arg0; + char **argv = (char **)fw_arg1; + int i; /* Always ignore the "-c" at argv[0] */ + + /* ignore all built-in args if any f/w args given */ + if (argc > 1) + *arcs_cmdline = '\0'; + + for (i = 1; i < argc; i++) { + if (i != 1) + strcat(arcs_cmdline, " "); + strcat(arcs_cmdline, argv[i]); + } +} + +void __init prom_init(void) +{ + int i; + +#ifdef CONFIG_CPU_TX39XX + mips_machtype = MACH_TOSHIBA_JMR3927; +#endif +#ifdef CONFIG_CPU_TX49XX + switch (TX4938_REV_PCODE()) { + case 0x4927: + mips_machtype = MACH_TOSHIBA_RBTX4927; + break; + case 0x4937: + mips_machtype = MACH_TOSHIBA_RBTX4937; + break; + case 0x4938: + mips_machtype = MACH_TOSHIBA_RBTX4938; + break; + } +#endif + for (i = 0; i < ARRAY_SIZE(board_vecs); i++) { + if (board_vecs[i]->type == mips_machtype) { + txx9_board_vec = board_vecs[i]; + strcpy(txx9_system_type, txx9_board_vec->system); + return txx9_board_vec->prom_init(); + } + } +} + +void __init prom_free_prom_memory(void) +{ +} + +const char *get_system_type(void) +{ + return txx9_system_type; +} + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +/* wrappers */ +void __init plat_mem_setup(void) +{ + txx9_board_vec->mem_setup(); +} + +void __init arch_init_irq(void) +{ + txx9_board_vec->irq_setup(); +} + +void __init plat_time_init(void) +{ + txx9_board_vec->time_init(); +} + +static int __init _txx9_arch_init(void) +{ + if (txx9_board_vec->arch_init) + txx9_board_vec->arch_init(); + return 0; +} +arch_initcall(_txx9_arch_init); + +static int __init _txx9_device_init(void) +{ + if (txx9_board_vec->device_init) + txx9_board_vec->device_init(); + return 0; +} +device_initcall(_txx9_device_init); + +int (*txx9_irq_dispatch)(int pending); +asmlinkage void plat_irq_dispatch(void) +{ + int pending = read_c0_status() & read_c0_cause() & ST0_IM; + int irq = txx9_irq_dispatch(pending); + + if (likely(irq >= 0)) + do_IRQ(irq); + else + spurious_interrupt(); +} diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile index 5f83ea375225..ba292c945669 100644 --- a/arch/mips/txx9/jmr3927/Makefile +++ b/arch/mips/txx9/jmr3927/Makefile @@ -2,7 +2,7 @@ # Makefile for TOSHIBA JMR-TX3927 board # -obj-y += prom.o init.o irq.o setup.o +obj-y += prom.o irq.o setup.o obj-$(CONFIG_KGDB) += kgdb_io.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/txx9/jmr3927/init.c b/arch/mips/txx9/jmr3927/init.c deleted file mode 100644 index 1bbb5343baf4..000000000000 --- a/arch/mips/txx9/jmr3927/init.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ahennessy@mvista.com - * - * arch/mips/jmr3927/common/init.c - * - * Copyright (C) 2000-2001 Toshiba Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include -#include -#include - -extern void __init prom_init_cmdline(void); - -const char *get_system_type(void) -{ - return "Toshiba" -#ifdef CONFIG_TOSHIBA_JMR3927 - " JMR_TX3927" -#endif - ; -} - -extern void puts(const char *cp); - -void __init prom_init(void) -{ -#ifdef CONFIG_TOSHIBA_JMR3927 - /* CCFG */ - if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) - puts("Warning: TX3927 TLB off\n"); -#endif - - prom_init_cmdline(); - add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); -} diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c index b97d22e15da6..070c9a115e57 100644 --- a/arch/mips/txx9/jmr3927/irq.c +++ b/arch/mips/txx9/jmr3927/irq.c @@ -39,6 +39,7 @@ #include #include +#include #include #if JMR3927_IRQ_END > NR_IRQS @@ -77,37 +78,30 @@ static void unmask_irq_ioc(unsigned int irq) (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); } -asmlinkage void plat_irq_dispatch(void) -{ - unsigned long cp0_cause = read_c0_cause(); - int irq; - - if ((cp0_cause & CAUSEF_IP7) == 0) - return; - irq = (cp0_cause >> CAUSEB_IP2) & 0x0f; - - do_IRQ(irq + JMR3927_IRQ_IRC); -} - -static irqreturn_t jmr3927_ioc_interrupt(int irq, void *dev_id) +static int jmr3927_ioc_irqroute(void) { unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR); int i; for (i = 0; i < JMR3927_NR_IRQ_IOC; i++) { - if (istat & (1 << i)) { - irq = JMR3927_IRQ_IOC + i; - do_IRQ(irq); - } + if (istat & (1 << i)) + return JMR3927_IRQ_IOC + i; } - return IRQ_HANDLED; + return -1; } -static struct irqaction ioc_action = { - .handler = jmr3927_ioc_interrupt, - .mask = CPU_MASK_NONE, - .name = "IOC", -}; +static int jmr3927_irq_dispatch(int pending) +{ + int irq; + + if ((pending & CAUSEF_IP7) == 0) + return -1; + irq = (pending >> CAUSEB_IP2) & 0x0f; + irq += JMR3927_IRQ_IRC; + if (irq == JMR3927_IRQ_IOCINT) + irq = jmr3927_ioc_irqroute(); + return irq; +} #ifdef CONFIG_PCI static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id) @@ -127,8 +121,9 @@ static struct irqaction pcierr_action = { static void __init jmr3927_irq_init(void); -void __init arch_init_irq(void) +void __init jmr3927_irq_setup(void) { + txx9_irq_dispatch = jmr3927_irq_dispatch; /* Now, interrupt control disabled, */ /* all IRC interrupts are masked, */ /* all IRC interrupt mode are Low Active. */ @@ -146,7 +141,7 @@ void __init arch_init_irq(void) jmr3927_irq_init(); /* setup IOC interrupt 1 (PCI, MODEM) */ - setup_irq(JMR3927_IRQ_IOCINT, &ioc_action); + set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq); #ifdef CONFIG_PCI setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action); diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c index 8bc1049b622e..2cadb423face 100644 --- a/arch/mips/txx9/jmr3927/prom.c +++ b/arch/mips/txx9/jmr3927/prom.c @@ -35,42 +35,10 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include -#include - #include -#include - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - -void __init prom_init_cmdline(void) -{ - char *cp; - int actr; - int prom_argc = fw_arg0; - char **prom_argv = (char **) fw_arg1; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { - strcpy(cp, prom_argv[actr]); - cp += strlen(prom_argv[actr]); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ - --cp; - *cp = '\0'; -} - -void __init prom_free_prom_memory(void) -{ -} +#include +#include #define TIMEOUT 0xffffff @@ -96,3 +64,13 @@ puts(const char *cp) prom_putchar('\r'); prom_putchar('\n'); } + +void __init jmr3927_prom_init(void) +{ + /* CCFG */ + if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) + puts("Warning: TX3927 TLB off\n"); + + prom_init_cmdline(); + add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM); +} diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index baa8c8db9a94..128a4ae3e72e 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -34,15 +34,16 @@ #include #include #include -#include #include #ifdef CONFIG_SERIAL_TXX9 #include #endif +#include #include #include #include +#include #include #include #include @@ -83,7 +84,7 @@ static void jmr3927_machine_power_off(void) while (1); } -void __init plat_time_init(void) +static void __init jmr3927_time_init(void) { txx9_clockevent_init(TX3927_TMR_REG(0), TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0), @@ -97,7 +98,7 @@ void __init plat_time_init(void) extern char * __init prom_getcmdline(void); static void jmr3927_board_init(void); -void __init plat_mem_setup(void) +static void __init jmr3927_mem_setup(void) { char *argptr; @@ -233,6 +234,8 @@ static void __init tx3927_setup(void) { int i; + txx9_cpu_clock = JMR3927_CORECLK; + txx9_gbus_clock = JMR3927_GBUSCLK; /* SDRAMC are configured by PROM */ /* ROMC */ @@ -336,7 +339,6 @@ static int __init jmr3927_rtc_init(void) dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1); return IS_ERR(dev) ? PTR_ERR(dev) : 0; } -device_initcall(jmr3927_rtc_init); /* Watchdog support */ @@ -356,36 +358,22 @@ static int __init jmr3927_wdt_init(void) { return txx9_wdt_init(TX3927_TMR_REG(2)); } -device_initcall(jmr3927_wdt_init); -/* Minimum CLK support */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "imbus_clk")) - return (struct clk *)JMR3927_IMCLK; - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) +static void __init jmr3927_device_init(void) { + jmr3927_rtc_init(); + jmr3927_wdt_init(); } -EXPORT_SYMBOL(clk_disable); -unsigned long clk_get_rate(struct clk *clk) -{ - return (unsigned long)clk; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); +struct txx9_board_vec jmr3927_vec __initdata = { + .type = MACH_TOSHIBA_JMR3927, + .system = "Toshiba JMR_TX3927", + .prom_init = jmr3927_prom_init, + .mem_setup = jmr3927_mem_setup, + .irq_setup = jmr3927_irq_setup, + .time_init = jmr3927_time_init, + .device_init = jmr3927_device_init, +#ifdef CONFIG_PCI + .pci_map_irq = jmr3927_pci_map_irq, +#endif +}; diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c index bef1447aeed2..70f13211bc2a 100644 --- a/arch/mips/txx9/rbtx4927/irq.c +++ b/arch/mips/txx9/rbtx4927/irq.c @@ -111,17 +111,10 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB #include #include #include +#include +#include #include -#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG 0 -#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_END 7 - -#define TOSHIBA_RBTX4927_IRQ_IOC_BEG ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG) /* 56 */ -#define TOSHIBA_RBTX4927_IRQ_IOC_END ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_END) /* 63 */ - -#define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC -#define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2) - static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq); static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq); @@ -136,34 +129,25 @@ static struct irq_chip toshiba_rbtx4927_irq_ioc_type = { #define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL #define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL -int toshiba_rbtx4927_irq_nested(int sw_irq) +static int toshiba_rbtx4927_irq_nested(int sw_irq) { u8 level3; level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f; if (level3) - sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + fls(level3) - 1; + sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1; return (sw_irq); } -static struct irqaction toshiba_rbtx4927_irq_ioc_action = { - .handler = no_action, - .flags = IRQF_SHARED, - .mask = CPU_MASK_NONE, - .name = TOSHIBA_RBTX4927_IOC_NAME -}; - static void __init toshiba_rbtx4927_irq_ioc_init(void) { int i; - for (i = TOSHIBA_RBTX4927_IRQ_IOC_BEG; - i <= TOSHIBA_RBTX4927_IRQ_IOC_END; i++) + for (i = RBTX4927_IRQ_IOC; + i < RBTX4927_IRQ_IOC + RBTX4927_NR_IRQ_IOC; i++) set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type, handle_level_irq); - - setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC, - &toshiba_rbtx4927_irq_ioc_action); + set_irq_chained_handler(RBTX4927_IRQ_IOCINT, handle_simple_irq); } static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq) @@ -171,7 +155,7 @@ static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq) unsigned char v; v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); - v |= (1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); + v |= (1 << (irq - RBTX4927_IRQ_IOC)); writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); } @@ -180,15 +164,34 @@ static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq) unsigned char v; v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB); - v &= ~(1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG)); + v &= ~(1 << (irq - RBTX4927_IRQ_IOC)); writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB); mmiowb(); } -void __init arch_init_irq(void) + +static int rbtx4927_irq_dispatch(int pending) { - extern void tx4927_irq_init(void); + int irq; + + if (pending & STATUSF_IP7) /* cpu timer */ + irq = MIPS_CPU_IRQ_BASE + 7; + else if (pending & STATUSF_IP2) { /* tx4927 pic */ + irq = txx9_irq(); + if (irq == RBTX4927_IRQ_IOCINT) + irq = toshiba_rbtx4927_irq_nested(irq); + } else if (pending & STATUSF_IP0) /* user line 0 */ + irq = MIPS_CPU_IRQ_BASE + 0; + else if (pending & STATUSF_IP1) /* user line 1 */ + irq = MIPS_CPU_IRQ_BASE + 1; + else + irq = -1; + return irq; +} +void __init rbtx4927_irq_setup(void) +{ + txx9_irq_dispatch = rbtx4927_irq_dispatch; tx4927_irq_init(); toshiba_rbtx4927_irq_ioc_init(); /* Onboard 10M Ether: High Active */ diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c index 0020bbee838b..942e627d2dc1 100644 --- a/arch/mips/txx9/rbtx4927/prom.c +++ b/arch/mips/txx9/rbtx4927/prom.c @@ -30,62 +30,16 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include -#include #include -#include -#include -#include +#include +#include -void __init prom_init_cmdline(void) -{ - int argc = (int) fw_arg0; - char **argv = (char **) fw_arg1; - int i; /* Always ignore the "-c" at argv[0] */ - - /* ignore all built-in args if any f/w args given */ - if (argc > 1) { - *arcs_cmdline = '\0'; - } - - for (i = 1; i < argc; i++) { - if (i != 1) { - strcat(arcs_cmdline, " "); - } - strcat(arcs_cmdline, argv[i]); - } -} - -void __init prom_init(void) +void __init rbtx4927_prom_init(void) { extern int tx4927_get_mem_size(void); - extern char* toshiba_name; int msize; prom_init_cmdline(); - - if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) { - mips_machtype = MACH_TOSHIBA_RBTX4927; - toshiba_name = "TX4927"; - } else { - mips_machtype = MACH_TOSHIBA_RBTX4937; - toshiba_name = "TX4937"; - } - msize = tx4927_get_mem_size(); add_memory_region(0, msize << 20, BOOT_MEM_RAM); } - -void __init prom_free_prom_memory(void) -{ -} - -const char *get_system_type(void) -{ - return "Toshiba RBTX4927/RBTX4937"; -} - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index 86b870abc319..c3566c39c26c 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -49,7 +49,6 @@ #include #include #include -#include #include #include @@ -76,8 +75,6 @@ char *prom_getcmdline(void); static int tx4927_ccfg_toeon = 1; -char *toshiba_name = ""; - #ifdef CONFIG_PCI static void __init tx4927_pci_setup(void) { @@ -171,15 +168,15 @@ static void __init tx4937_pci_setup(void) } } -static int __init rbtx4927_arch_init(void) +static void __init rbtx4927_arch_init(void) { if (mips_machtype == MACH_TOSHIBA_RBTX4937) tx4937_pci_setup(); else tx4927_pci_setup(); - return 0; } -arch_initcall(rbtx4927_arch_init); +#else +#define rbtx4927_arch_init NULL #endif /* CONFIG_PCI */ static void __noreturn wait_forever(void) @@ -223,14 +220,12 @@ void toshiba_rbtx4927_power_off(void) /* no return */ } -void __init plat_mem_setup(void) +static void __init rbtx4927_mem_setup(void) { int i; u32 cp0_config; char *argptr; - printk("CPU is %s\n", toshiba_name); - /* f/w leaves this on at startup */ clear_c0_status(ST0_ERL); @@ -323,7 +318,7 @@ void __init plat_mem_setup(void) req.iotype = UPIO_MEM; req.membase = (char *)(0xff1ff300 + i * 0x100); req.mapbase = 0xff1ff300 + i * 0x100; - req.irq = TX4927_IRQ_PIC_BEG + 8 + i; + req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i); req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; req.uartclk = 50000000; early_serial_txx9_setup(&req); @@ -352,7 +347,7 @@ void __init plat_mem_setup(void) #endif } -void __init plat_time_init(void) +static void __init rbtx4927_time_init(void) { mips_hpt_frequency = txx9_cpu_clock / 2; if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS) @@ -372,7 +367,6 @@ static int __init toshiba_rbtx4927_rtc_init(void) platform_device_register_simple("rtc-ds1742", -1, &res, 1); return IS_ERR(dev) ? PTR_ERR(dev) : 0; } -device_initcall(toshiba_rbtx4927_rtc_init); static int __init rbtx4927_ne_init(void) { @@ -391,7 +385,6 @@ static int __init rbtx4927_ne_init(void) res, ARRAY_SIZE(res)); return IS_ERR(dev) ? PTR_ERR(dev) : 0; } -device_initcall(rbtx4927_ne_init); /* Watchdog support */ @@ -411,36 +404,37 @@ static int __init rbtx4927_wdt_init(void) { return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL); } -device_initcall(rbtx4927_wdt_init); - -/* Minimum CLK support */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "imbus_clk")) - return (struct clk *)50000000; - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); -void clk_disable(struct clk *clk) +static void __init rbtx4927_device_init(void) { + toshiba_rbtx4927_rtc_init(); + rbtx4927_ne_init(); + rbtx4927_wdt_init(); } -EXPORT_SYMBOL(clk_disable); -unsigned long clk_get_rate(struct clk *clk) -{ - return (unsigned long)clk; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); +struct txx9_board_vec rbtx4927_vec __initdata = { + .type = MACH_TOSHIBA_RBTX4927, + .system = "Toshiba RBTX4927", + .prom_init = rbtx4927_prom_init, + .mem_setup = rbtx4927_mem_setup, + .irq_setup = rbtx4927_irq_setup, + .time_init = rbtx4927_time_init, + .device_init = rbtx4927_device_init, + .arch_init = rbtx4927_arch_init, +#ifdef CONFIG_PCI + .pci_map_irq = rbtx4927_pci_map_irq, +#endif +}; +struct txx9_board_vec rbtx4937_vec __initdata = { + .type = MACH_TOSHIBA_RBTX4937, + .system = "Toshiba RBTX4937", + .prom_init = rbtx4927_prom_init, + .mem_setup = rbtx4927_mem_setup, + .irq_setup = rbtx4927_irq_setup, + .time_init = rbtx4927_time_init, + .device_init = rbtx4927_device_init, + .arch_init = rbtx4927_arch_init, +#ifdef CONFIG_PCI + .pci_map_irq = rbtx4927_pci_map_irq, +#endif +}; diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c index f4984820251a..3971a061657a 100644 --- a/arch/mips/txx9/rbtx4938/irq.c +++ b/arch/mips/txx9/rbtx4938/irq.c @@ -66,6 +66,8 @@ IRQ Device */ #include #include +#include +#include #include static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq); @@ -80,26 +82,17 @@ static struct irq_chip toshiba_rbtx4938_irq_ioc_type = { .unmask = toshiba_rbtx4938_irq_ioc_enable, }; -int -toshiba_rbtx4938_irq_nested(int sw_irq) +static int toshiba_rbtx4938_irq_nested(int sw_irq) { u8 level3; level3 = readb(rbtx4938_imstat_addr); if (level3) /* must use fls so onboard ATA has priority */ - sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1; - + sw_irq = RBTX4938_IRQ_IOC + fls(level3) - 1; return sw_irq; } -static struct irqaction toshiba_rbtx4938_irq_ioc_action = { - .handler = no_action, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = TOSHIBA_RBTX4938_IOC_NAME, -}; - /**********************************************************************************/ /* Functions for ioc */ /**********************************************************************************/ @@ -108,13 +101,12 @@ toshiba_rbtx4938_irq_ioc_init(void) { int i; - for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG; - i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++) + for (i = RBTX4938_IRQ_IOC; + i < RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC; i++) set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type, handle_level_irq); - setup_irq(RBTX4938_IRQ_IOCINT, - &toshiba_rbtx4938_irq_ioc_action); + set_irq_chained_handler(RBTX4938_IRQ_IOCINT, handle_simple_irq); } static void @@ -123,7 +115,7 @@ toshiba_rbtx4938_irq_ioc_enable(unsigned int irq) unsigned char v; v = readb(rbtx4938_imask_addr); - v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); + v |= (1 << (irq - RBTX4938_IRQ_IOC)); writeb(v, rbtx4938_imask_addr); mmiowb(); } @@ -134,15 +126,33 @@ toshiba_rbtx4938_irq_ioc_disable(unsigned int irq) unsigned char v; v = readb(rbtx4938_imask_addr); - v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); + v &= ~(1 << (irq - RBTX4938_IRQ_IOC)); writeb(v, rbtx4938_imask_addr); mmiowb(); } -void __init arch_init_irq(void) +static int rbtx4938_irq_dispatch(int pending) { - extern void tx4938_irq_init(void); + int irq; + + if (pending & STATUSF_IP7) + irq = MIPS_CPU_IRQ_BASE + 7; + else if (pending & STATUSF_IP2) { + irq = txx9_irq(); + if (irq == RBTX4938_IRQ_IOCINT) + irq = toshiba_rbtx4938_irq_nested(irq); + } else if (pending & STATUSF_IP1) + irq = MIPS_CPU_IRQ_BASE + 0; + else if (pending & STATUSF_IP0) + irq = MIPS_CPU_IRQ_BASE + 1; + else + irq = -1; + return irq; +} +void __init rbtx4938_irq_setup(void) +{ + txx9_irq_dispatch = rbtx4938_irq_dispatch; /* Now, interrupt control disabled, */ /* all IRC interrupts are masked, */ /* all IRC interrupt mode are Low Active. */ diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c index 134fcc2dc7d2..fbb37458ddb2 100644 --- a/arch/mips/txx9/rbtx4938/prom.c +++ b/arch/mips/txx9/rbtx4938/prom.c @@ -11,34 +11,12 @@ */ #include -#include -#include #include - -#include #include -#include - -void __init prom_init_cmdline(void) -{ - int argc = (int) fw_arg0; - char **argv = (char **) fw_arg1; - int i; - - /* ignore all built-in args if any f/w args given */ - if (argc > 1) { - *arcs_cmdline = '\0'; - } - - for (i = 1; i < argc; i++) { - if (i != 1) { - strcat(arcs_cmdline, " "); - } - strcat(arcs_cmdline, argv[i]); - } -} +#include +#include -void __init prom_init(void) +void __init rbtx4938_prom_init(void) { extern int tx4938_get_mem_size(void); int msize; @@ -48,25 +26,4 @@ void __init prom_init(void) msize = tx4938_get_mem_size(); add_memory_region(0, msize << 20, BOOT_MEM_RAM); - - return; -} - -void __init prom_free_prom_memory(void) -{ -} - -void __init prom_fixup_mem_map(unsigned long start, unsigned long end) -{ - return; -} - -const char *get_system_type(void) -{ - return "Toshiba RBTX4938"; -} - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); } diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 144d2cada820..8306ba333dda 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include @@ -147,9 +146,9 @@ static void __init rbtx4938_pci_setup(void) #define SEEPROM3_CS 1 /* IOC */ #define SRTC_CS 2 /* IOC */ -#ifdef CONFIG_PCI static int __init rbtx4938_ethaddr_init(void) { +#ifdef CONFIG_PCI unsigned char dat[17]; unsigned char sum; int i; @@ -179,10 +178,9 @@ static int __init rbtx4938_ethaddr_init(void) platform_device_add(pdev)) platform_device_put(pdev); } +#endif /* CONFIG_PCI */ return 0; } -device_initcall(rbtx4938_ethaddr_init); -#endif /* CONFIG_PCI */ static void __init rbtx4938_spi_setup(void) { @@ -366,7 +364,7 @@ void __init tx4938_board_setup(void) #endif } -void __init plat_time_init(void) +static void __init rbtx4938_time_init(void) { mips_hpt_frequency = txx9_cpu_clock / 2; if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS) @@ -375,7 +373,7 @@ void __init plat_time_init(void) txx9_gbus_clock / 2); } -void __init plat_mem_setup(void) +static void __init rbtx4938_mem_setup(void) { unsigned long long pcfg; char *argptr; @@ -496,7 +494,6 @@ static int __init rbtx4938_ne_init(void) res, ARRAY_SIZE(res)); return IS_ERR(dev) ? PTR_ERR(dev) : 0; } -device_initcall(rbtx4938_ne_init); /* GPIO support */ @@ -587,14 +584,13 @@ static int __init rbtx4938_spi_init(void) return 0; } -static int __init rbtx4938_arch_init(void) +static void __init rbtx4938_arch_init(void) { txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16); gpiochip_add(&rbtx4938_spi_gpio_chip); rbtx4938_pci_setup(); - return rbtx4938_spi_init(); + rbtx4938_spi_init(); } -arch_initcall(rbtx4938_arch_init); /* Watchdog support */ @@ -614,38 +610,24 @@ static int __init rbtx4938_wdt_init(void) { return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); } -device_initcall(rbtx4938_wdt_init); - -/* Minimum CLK support */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "spi-baseclk")) - return (struct clk *)(txx9_gbus_clock / 2 / 4); - if (!strcmp(id, "imbus_clk")) - return (struct clk *)(txx9_gbus_clock / 2); - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); -unsigned long clk_get_rate(struct clk *clk) +static void __init rbtx4938_device_init(void) { - return (unsigned long)clk; + rbtx4938_ethaddr_init(); + rbtx4938_ne_init(); + rbtx4938_wdt_init(); } -EXPORT_SYMBOL(clk_get_rate); -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); +struct txx9_board_vec rbtx4938_vec __initdata = { + .type = MACH_TOSHIBA_RBTX4938, + .system = "Toshiba RBTX4938", + .prom_init = rbtx4938_prom_init, + .mem_setup = rbtx4938_mem_setup, + .irq_setup = rbtx4938_irq_setup, + .time_init = rbtx4938_time_init, + .device_init = rbtx4938_device_init, + .arch_init = rbtx4938_arch_init, +#ifdef CONFIG_PCI + .pci_map_irq = rbtx4938_pci_map_irq, +#endif +}; diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index 2ff6c2002204..6cd147764f19 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -20,4 +20,22 @@ extern unsigned int txx9_master_clock; extern unsigned int txx9_cpu_clock; extern unsigned int txx9_gbus_clock; +struct pci_dev; +struct txx9_board_vec { + unsigned long type; + const char *system; + void (*prom_init)(void); + void (*mem_setup)(void); + void (*irq_setup)(void); + void (*time_init)(void); + void (*arch_init)(void); + void (*device_init)(void); +#ifdef CONFIG_PCI + int (*pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin); +#endif +}; +extern struct txx9_board_vec *txx9_board_vec; +extern int (*txx9_irq_dispatch)(int pending); +void prom_init_cmdline(void); + #endif /* __ASM_TXX9_GENERIC_H */ diff --git a/include/asm-mips/txx9/jmr3927.h b/include/asm-mips/txx9/jmr3927.h index 29e54981a86e..d6eb1b6a54eb 100644 --- a/include/asm-mips/txx9/jmr3927.h +++ b/include/asm-mips/txx9/jmr3927.h @@ -174,4 +174,9 @@ * INT[3:0] */ +void jmr3927_prom_init(void); +void jmr3927_irq_setup(void); +struct pci_dev; +int jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + #endif /* __ASM_TXX9_JMR3927_H */ diff --git a/include/asm-mips/txx9/rbtx4927.h b/include/asm-mips/txx9/rbtx4927.h index 5b6f488b1b3c..bf194589216f 100644 --- a/include/asm-mips/txx9/rbtx4927.h +++ b/include/asm-mips/txx9/rbtx4927.h @@ -46,12 +46,16 @@ #define RBTX4927_INTF_PCIB (1 << RBTX4927_INTB_PCIB) #define RBTX4927_INTF_PCIA (1 << RBTX4927_INTB_PCIA) -#define RBTX4927_IRQ_IOC (TX4927_IRQ_PIC_BEG + TX4927_NUM_IR) +#define RBTX4927_NR_IRQ_IOC 8 /* IOC */ + +#define RBTX4927_IRQ_IOC (TXX9_IRQ_BASE + TX4927_NUM_IR) #define RBTX4927_IRQ_IOC_PCID (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCID) #define RBTX4927_IRQ_IOC_PCIC (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIC) #define RBTX4927_IRQ_IOC_PCIB (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIB) #define RBTX4927_IRQ_IOC_PCIA (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIA) +#define RBTX4927_IRQ_IOCINT (TXX9_IRQ_BASE + TX4927_IR_INT(1)) + #ifdef CONFIG_PCI #define RBTX4927_ISA_IO_OFFSET RBTX4927_PCIIO #else @@ -65,8 +69,11 @@ #define RBTX4927_SW_RESET_ENABLE_SET 0x01 #define RBTX4927_RTL_8019_BASE (0x1c020280 - RBTX4927_ISA_IO_OFFSET) -#define RBTX4927_RTL_8019_IRQ (TX4927_IRQ_PIC_BEG + 5) +#define RBTX4927_RTL_8019_IRQ (TXX9_IRQ_BASE + TX4927_IR_INT(3)) -int toshiba_rbtx4927_irq_nested(int sw_irq); +void rbtx4927_prom_init(void); +void rbtx4927_irq_setup(void); +struct pci_dev; +int rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); #endif /* __ASM_TXX9_RBTX4927_H */ diff --git a/include/asm-mips/txx9/rbtx4938.h b/include/asm-mips/txx9/rbtx4938.h index 8450f735d056..2f5d5e705a41 100644 --- a/include/asm-mips/txx9/rbtx4938.h +++ b/include/asm-mips/txx9/rbtx4938.h @@ -101,35 +101,12 @@ * that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new * IRQ hardware is supported. */ -#define RBTX4938_NR_IRQ_LOCAL 8 -#define RBTX4938_NR_IRQ_IRC 32 /* On-Chip IRC */ #define RBTX4938_NR_IRQ_IOC 8 -#define TX4938_IRQ_CP0_BEG MIPS_CPU_IRQ_BASE -#define TX4938_IRQ_CP0_END (MIPS_CPU_IRQ_BASE + 8 - 1) - -#define TX4938_IRQ_PIC_BEG TXX9_IRQ_BASE -#define TX4938_IRQ_PIC_END (TXX9_IRQ_BASE + TXx9_MAX_IR - 1) -#define TX4938_IRQ_NEST_EXT_ON_PIC (TX4938_IRQ_PIC_BEG+2) -#define TX4938_IRQ_NEST_PIC_ON_CP0 (TX4938_IRQ_CP0_BEG+2) -#define TX4938_IRQ_USER0 (TX4938_IRQ_CP0_BEG+0) -#define TX4938_IRQ_USER1 (TX4938_IRQ_CP0_BEG+1) -#define TX4938_IRQ_CPU_TIMER (TX4938_IRQ_CP0_BEG+7) - -#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG 0 -#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_END 7 - -#define TOSHIBA_RBTX4938_IRQ_IOC_BEG ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG) /* 56 */ -#define TOSHIBA_RBTX4938_IRQ_IOC_END ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_END) /* 63 */ -#define RBTX4938_IRQ_LOCAL TX4938_IRQ_CP0_BEG -#define RBTX4938_IRQ_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_NR_IRQ_LOCAL) -#define RBTX4938_IRQ_IOC (RBTX4938_IRQ_IRC + RBTX4938_NR_IRQ_IRC) +#define RBTX4938_IRQ_IRC TXX9_IRQ_BASE +#define RBTX4938_IRQ_IOC (TXX9_IRQ_BASE + TX4938_NUM_IR) #define RBTX4938_IRQ_END (RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC) -#define RBTX4938_IRQ_LOCAL_SOFT0 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT0) -#define RBTX4938_IRQ_LOCAL_SOFT1 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT1) -#define RBTX4938_IRQ_LOCAL_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_IRC_INT) -#define RBTX4938_IRQ_LOCAL_TIMER (RBTX4938_IRQ_LOCAL + RBTX4938_TIMER_INT) #define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR) #define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR) #define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n)) @@ -157,11 +134,16 @@ /* IOC (PCI, etc) */ -#define RBTX4938_IRQ_IOCINT (TX4938_IRQ_NEST_EXT_ON_PIC) +#define RBTX4938_IRQ_IOCINT (TXX9_IRQ_BASE + TX4938_IR_INT(0)) /* Onboard 10M Ether */ -#define RBTX4938_IRQ_ETHER (TX4938_IRQ_NEST_EXT_ON_PIC + 1) +#define RBTX4938_IRQ_ETHER (TXX9_IRQ_BASE + TX4938_IR_INT(1)) #define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base) #define RBTX4938_RTL_8019_IRQ (RBTX4938_IRQ_ETHER) +void rbtx4938_prom_init(void); +void rbtx4938_irq_setup(void); +struct pci_dev; +int rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + #endif /* __ASM_TXX9_RBTX4938_H */ diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h index c0382fd2ae7f..46d60afc038b 100644 --- a/include/asm-mips/txx9/tx4927.h +++ b/include/asm-mips/txx9/tx4927.h @@ -32,20 +32,6 @@ #include #include -#define TX4927_IRQ_CP0_BEG MIPS_CPU_IRQ_BASE -#define TX4927_IRQ_CP0_END (MIPS_CPU_IRQ_BASE + 8 - 1) - -#define TX4927_IRQ_PIC_BEG TXX9_IRQ_BASE -#define TX4927_IRQ_PIC_END (TXX9_IRQ_BASE + TXx9_MAX_IR - 1) - - -#define TX4927_IRQ_USER0 (TX4927_IRQ_CP0_BEG+0) -#define TX4927_IRQ_USER1 (TX4927_IRQ_CP0_BEG+1) -#define TX4927_IRQ_NEST_PIC_ON_CP0 (TX4927_IRQ_CP0_BEG+2) -#define TX4927_IRQ_CPU_TIMER (TX4927_IRQ_CP0_BEG+7) - -#define TX4927_IRQ_NEST_EXT_ON_PIC (TX4927_IRQ_PIC_BEG+3) - #define TX4927_SDRAMC_REG 0xff1f8000 #define TX4927_EBUSC_REG 0xff1f9000 #define TX4927_PCIC_REG 0xff1fd000 @@ -54,10 +40,14 @@ #define TX4927_NR_TMR 3 #define TX4927_TMR_REG(ch) (0xff1ff000 + (ch) * 0x100) +#define TX4927_IR_INT(n) (2 + (n)) +#define TX4927_IR_SIO(n) (8 + (n)) #define TX4927_IR_PCIC 16 #define TX4927_IR_PCIERR 22 #define TX4927_NUM_IR 32 +#define TX4927_IRC_INT 2 /* IP[2] in Status register */ + struct tx4927_sdramc_reg { volatile unsigned long long cr[4]; volatile unsigned long long unused0[4]; @@ -224,5 +214,6 @@ static inline void tx4927_ccfg_change(__u64 change, __u64 new) int tx4927_report_pciclk(void); int tx4927_pciclk66_setup(void); +void tx4927_irq_init(void); #endif /* __ASM_TXX9_TX4927_H */ diff --git a/include/asm-mips/txx9/tx4938.h b/include/asm-mips/txx9/tx4938.h index 0bb891993b08..12de68a4c10a 100644 --- a/include/asm-mips/txx9/tx4938.h +++ b/include/asm-mips/txx9/tx4938.h @@ -18,11 +18,6 @@ #define tx4938_read_nfmc(addr) (*(volatile unsigned int *)(addr)) #define tx4938_write_nfmc(b, addr) (*(volatile unsigned int *)(addr)) = (b) -#define TX4938_NR_IRQ_LOCAL TX4938_IRQ_PIC_BEG - -#define TX4938_IRQ_IRC_PCIC (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIC) -#define TX4938_IRQ_IRC_PCIERR (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIERR) - #define TX4938_PCIIO_0 0x10000000 #define TX4938_PCIIO_1 0x01010000 #define TX4938_PCIMEM_0 0x08000000 @@ -271,6 +266,8 @@ struct tx4938_ccfg_reg { #define TX4938_IR_ETH0 TX4938_IR_INT(4) #define TX4938_IR_ETH1 TX4938_IR_INT(3) +#define TX4938_IRC_INT 2 /* IP[2] in Status register */ + /* * CCFG */ @@ -463,5 +460,6 @@ void tx4938_report_pci1clk(void); int tx4938_pciclk66_setup(void); struct pci_dev; int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot); +void tx4938_irq_init(void); #endif -- cgit v1.2.3 From bf744d417ff2fe1e8e386c7ad06e79c34a078642 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 11 Jul 2008 23:28:04 +0900 Subject: [MIPS] TXx9: Update and merge defconfigs Merge rbhma4200(RBTX4927/37) and rbhma4500(RBTX4938) defconfig into single rbtx49xx defconfig. And jmr3927 defconfig is also updated. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/configs/jmr3927_defconfig | 10 +- arch/mips/configs/rbhma4200_defconfig | 698 ------------------------------- arch/mips/configs/rbhma4500_defconfig | 763 --------------------------------- arch/mips/configs/rbtx49xx_defconfig | 767 ++++++++++++++++++++++++++++++++++ 4 files changed, 772 insertions(+), 1466 deletions(-) delete mode 100644 arch/mips/configs/rbhma4200_defconfig delete mode 100644 arch/mips/configs/rbhma4500_defconfig create mode 100644 arch/mips/configs/rbtx49xx_defconfig diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index ab16e67ff08b..9d5bd2a0af3d 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc9 -# Fri Jul 11 00:25:19 2008 +# Fri Jul 11 23:01:36 2008 # CONFIG_MIPS=y @@ -37,10 +37,11 @@ CONFIG_MIPS=y # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -CONFIG_TOSHIBA_JMR3927=y -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_MACH_TX39XX=y +# CONFIG_MACH_TX49XX is not set # CONFIG_WR_PPMC is not set +CONFIG_TOSHIBA_JMR3927=y +CONFIG_SOC_TX3927=y # CONFIG_TOSHIBA_FPCIB0 is not set CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -67,7 +68,6 @@ CONFIG_CPU_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_IRQ_TXX9=y -CONFIG_MIPS_TX3927=y CONFIG_SWAP_IO_SPACE=y CONFIG_MIPS_L1_CACHE_SHIFT=5 diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig deleted file mode 100644 index e0af6a9f9f0c..000000000000 --- a/arch/mips/configs/rbhma4200_defconfig +++ /dev/null @@ -1,698 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc9 -# Thu Jul 10 23:52:40 2008 -# -CONFIG_MIPS=y - -# -# Machine selection -# -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_BCM47XX is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -CONFIG_TOSHIBA_RBTX4927=y -# CONFIG_TOSHIBA_RBTX4938 is not set -# CONFIG_WR_PPMC is not set -# CONFIG_TOSHIBA_FPCIB0 is not set -CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y -CONFIG_PCI_TX4927=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_TXX9=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -# CONFIG_HOTPLUG_CPU is not set -# CONFIG_NO_IOPORT is not set -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_TXX9=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_LOONGSON2 is not set -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -CONFIG_CPU_TX49XX=y -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_TX49XX=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_VIRT_TO_BUS=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_256 is not set -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_SECCOMP is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -# CONFIG_EXPERIMENTAL is not set -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -# CONFIG_PCSPKR_PLATFORM is not set -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y -# CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -# CONFIG_MODULE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCI_LEGACY is not set -CONFIG_MMU=y - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# A new alternative FireWire stack is available with EXPERIMENTAL=y -# -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_AX88796 is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NE2000=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_TXX9=y -CONFIG_HAS_TXX9_SERIAL=y -CONFIG_SERIAL_TXX9_NR_UARTS=6 -CONFIG_SERIAL_TXX9_CONSOLE=y -CONFIG_SERIAL_TXX9_STDSERIAL=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -CONFIG_DEVPORT=y -# CONFIG_I2C is not set -# CONFIG_SPI is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_TXX9_WDT=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -CONFIG_RTC_DRV_DS1742=y -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_HFSPLUS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig deleted file mode 100644 index 50aa1b641360..000000000000 --- a/arch/mips/configs/rbhma4500_defconfig +++ /dev/null @@ -1,763 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc9 -# Thu Jul 10 23:53:27 2008 -# -CONFIG_MIPS=y - -# -# Machine selection -# -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_BCM47XX is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -CONFIG_TOSHIBA_RBTX4938=y -# CONFIG_WR_PPMC is not set -# CONFIG_TOSHIBA_FPCIB0 is not set -CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y - -# -# Multiplex Pin Select -# -CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y -# CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set -# CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set -CONFIG_PCI_TX4927=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_TXX9=y -CONFIG_CSRC_R4K=y -CONFIG_GPIO_TXX9=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -# CONFIG_HOTPLUG_CPU is not set -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_GPIO=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_TXX9=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_LOONGSON2 is not set -# CONFIG_CPU_MIPS32_R1 is not set -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -CONFIG_CPU_TX49XX=y -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_TX49XX=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_VIRT_TO_BUS=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_256 is not set -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_SECCOMP is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -# CONFIG_EXPERIMENTAL is not set -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_HOTPLUG is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -# CONFIG_PCSPKR_PLATFORM is not set -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y -# CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SLABINFO=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -# CONFIG_MODULE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCI_LEGACY is not set -CONFIG_MMU=y - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# A new alternative FireWire stack is available with EXPERIMENTAL=y -# -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_AX88796 is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NE2000=y -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -CONFIG_TC35815=y -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139TOO is not set -# CONFIG_R6040 is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_TXX9=y -CONFIG_HAS_TXX9_SERIAL=y -CONFIG_SERIAL_TXX9_NR_UARTS=6 -CONFIG_SERIAL_TXX9_CONSOLE=y -CONFIG_SERIAL_TXX9_STDSERIAL=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -CONFIG_DEVPORT=y -# CONFIG_I2C is not set -CONFIG_SPI=y -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -CONFIG_SPI_TXX9=y - -# -# SPI Protocol Masters -# -CONFIG_SPI_AT25=y -# CONFIG_SPI_TLE62X0 is not set -CONFIG_HAVE_GPIO_LIB=y - -# -# GPIO Support -# - -# -# I2C GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_GPIO_MCP23S08 is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_TXX9_WDT=m - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -# CONFIG_RTC_DRV_TEST is not set - -# -# SPI RTC drivers -# -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_R9701 is not set -CONFIG_RTC_DRV_RS5C348=y - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set -CONFIG_GENERIC_ACL=y - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_HFSPLUS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SAMPLES is not set -CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig new file mode 100644 index 000000000000..e42aed5a38bb --- /dev/null +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -0,0 +1,767 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc9 +# Fri Jul 11 23:03:21 2008 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +CONFIG_MACH_TX49XX=y +# CONFIG_WR_PPMC is not set +CONFIG_TOSHIBA_RBTX4927=y +CONFIG_TOSHIBA_RBTX4938=y +CONFIG_SOC_TX4927=y +CONFIG_SOC_TX4938=y +# CONFIG_TOSHIBA_FPCIB0 is not set +CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y + +# +# Multiplex Pin Select +# +CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y +# CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set +# CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set +CONFIG_PCI_TX4927=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CEVT_TXX9=y +CONFIG_CSRC_R4K=y +CONFIG_GPIO_TXX9=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_TXX9=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_MIPS32_R1 is not set +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +CONFIG_CPU_TX49XX=y +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_SYS_HAS_CPU_TX49XX=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y +# CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +CONFIG_MMU=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# A new alternative FireWire stack is available with EXPERIMENTAL=y +# +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_DM9000 is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NE2000=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +CONFIG_TC35815=y +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139TOO is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_TXX9=y +CONFIG_HAS_TXX9_SERIAL=y +CONFIG_SERIAL_TXX9_NR_UARTS=6 +CONFIG_SERIAL_TXX9_CONSOLE=y +CONFIG_SERIAL_TXX9_STDSERIAL=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_TXX9=y + +# +# SPI Protocol Masters +# +CONFIG_SPI_AT25=y +# CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_TXX9_WDT=m + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +CONFIG_RTC_DRV_RS5C348=y + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +CONFIG_RTC_DRV_DS1742=y +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_HFSPLUS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="" +CONFIG_SYS_SUPPORTS_KGDB=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3 From 5b438c44082d9f09fed10f3621fe8d5c93d3676d Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 10 Jul 2008 20:29:55 +0200 Subject: [MIPS] IP22/28: Add platform devices for HAL2 Create platform devices for hal2 and add option for selecting HAL2 alsa driver. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 5 +++++ arch/mips/sgi-ip22/ip22-platform.c | 7 +++++++ 2 files changed, 12 insertions(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 72baa1a70fcb..d23204e29e16 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -385,6 +385,8 @@ config SGI_IP28 select SGI_HAS_DS1286 select SGI_HAS_I8042 select SGI_HAS_INDYDOG + select SGI_HAS_HAL2 + select SGI_HAS_HAL2 select SGI_HAS_SEEQ select SGI_HAS_WD93 select SGI_HAS_ZILOG @@ -868,6 +870,9 @@ config SGI_HAS_DS1286 config SGI_HAS_INDYDOG bool +config SGI_HAS_HAL2 + bool + config SGI_HAS_SEEQ bool diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c index 28ffec8e5d1a..d93d07a8c317 100644 --- a/arch/mips/sgi-ip22/ip22-platform.c +++ b/arch/mips/sgi-ip22/ip22-platform.c @@ -175,3 +175,10 @@ static int __init sgiseeq_devinit(void) } device_initcall(sgiseeq_devinit); + +static int __init sgi_hal2_devinit(void) +{ + return IS_ERR(platform_device_register_simple("sgihal2", 0, NULL, 0)); +} + +device_initcall(sgi_hal2_devinit); -- cgit v1.2.3 From 9ecb1ff1b295a515b21d0ac83d8bd39b07335aab Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 11 Jul 2008 22:39:14 +0900 Subject: [MIPS] replace inline assembler to cpu_wait() Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/gt64120/wrppmc/reset.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/mips/gt64120/wrppmc/reset.c b/arch/mips/gt64120/wrppmc/reset.c index c355cff38f6c..e66c87164a02 100644 --- a/arch/mips/gt64120/wrppmc/reset.c +++ b/arch/mips/gt64120/wrppmc/reset.c @@ -5,10 +5,12 @@ * * Copyright (C) 1997 Ralf Baechle */ +#include #include #include #include +#include void wrppmc_machine_restart(char *command) { @@ -32,11 +34,8 @@ void wrppmc_machine_halt(void) printk(KERN_NOTICE "You can safely turn off the power\n"); while (1) { - __asm__( - ".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0" - ); + if (cpu_wait) + cpu_wait(); } } -- cgit v1.2.3 From 3f16654f36723f5ef1ca38c4e2078ca377a0f86f Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 11 Jul 2008 22:39:18 +0900 Subject: [MIPS] remove wrppmc_machine_power_off() It can be replace wrppmc_machine_halt(). Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/gt64120/wrppmc/reset.c | 5 ----- arch/mips/gt64120/wrppmc/setup.c | 3 +-- 2 files changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/mips/gt64120/wrppmc/reset.c b/arch/mips/gt64120/wrppmc/reset.c index e66c87164a02..cc5474b24f06 100644 --- a/arch/mips/gt64120/wrppmc/reset.c +++ b/arch/mips/gt64120/wrppmc/reset.c @@ -38,8 +38,3 @@ void wrppmc_machine_halt(void) cpu_wait(); } } - -void wrppmc_machine_power_off(void) -{ - wrppmc_machine_halt(); -} diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c index 728ef6a80edd..ca65c84031a7 100644 --- a/arch/mips/gt64120/wrppmc/setup.c +++ b/arch/mips/gt64120/wrppmc/setup.c @@ -98,11 +98,10 @@ void __init plat_mem_setup(void) { extern void wrppmc_machine_restart(char *command); extern void wrppmc_machine_halt(void); - extern void wrppmc_machine_power_off(void); _machine_restart = wrppmc_machine_restart; _machine_halt = wrppmc_machine_halt; - pm_power_off = wrppmc_machine_power_off; + pm_power_off = wrppmc_machine_halt; /* This makes the operations of 'in/out[bwl]' to the * physical address ( < KSEG0) can work via KSEG1 -- cgit v1.2.3 From efff4ae259b8f750ea426d3084007f85c0a15a85 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 11 Jul 2008 22:45:21 +0900 Subject: [MIPS] cmbvr4133: Remove support It cannot be built for a long time and nobody maintains it. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 6 - arch/mips/pci/Makefile | 1 - arch/mips/pci/fixup-vr4133.c | 194 ---------------------- arch/mips/vr41xx/Kconfig | 17 -- arch/mips/vr41xx/nec-cmbvr4133/Makefile | 8 - arch/mips/vr41xx/nec-cmbvr4133/init.c | 65 -------- arch/mips/vr41xx/nec-cmbvr4133/irq.c | 46 ------ arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c | 249 ----------------------------- arch/mips/vr41xx/nec-cmbvr4133/setup.c | 89 ----------- include/asm-mips/mach-vr41xx/irq.h | 3 - include/asm-mips/vr41xx/cmbvr4133.h | 56 ------- 11 files changed, 734 deletions(-) delete mode 100644 arch/mips/pci/fixup-vr4133.c delete mode 100644 arch/mips/vr41xx/nec-cmbvr4133/Makefile delete mode 100644 arch/mips/vr41xx/nec-cmbvr4133/init.c delete mode 100644 arch/mips/vr41xx/nec-cmbvr4133/irq.c delete mode 100644 arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c delete mode 100644 arch/mips/vr41xx/nec-cmbvr4133/setup.c delete mode 100644 include/asm-mips/vr41xx/cmbvr4133.h diff --git a/arch/mips/Makefile b/arch/mips/Makefile index d319cd624135..c4a3098a58c6 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -354,12 +354,6 @@ load-$(CONFIG_LASAT) += 0xffffffff80000000 core-$(CONFIG_MACH_VR41XX) += arch/mips/vr41xx/common/ cflags-$(CONFIG_MACH_VR41XX) += -Iinclude/asm-mips/mach-vr41xx -# -# NEC VR4133 -# -core-$(CONFIG_NEC_CMBVR4133) += arch/mips/vr41xx/nec-cmbvr4133/ -load-$(CONFIG_NEC_CMBVR4133) += 0xffffffff80100000 - # # ZAO Networks Capcella (VR4131) # diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 875b643438c0..57e34cafa497 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_MIPS_MSC) += ops-msc.o obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o -obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c deleted file mode 100644 index 34e651bd2b5e..000000000000 --- a/arch/mips/pci/fixup-vr4133.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * arch/mips/pci/fixup-vr4133.c - * - * The NEC CMB-VR4133 Board specific PCI fixups. - * - * Author: Yoichi Yuasa and - * Alex Sapkov - * - * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Modified for support in 2.6 - * Author: Manish Lachwani (mlachwani@mvista.com) - * - */ -#include -#include -#include - -#include -#include -#include - -extern int vr4133_rockhopper; -extern void ali_m1535plus_init(struct pci_dev *dev); -extern void ali_m5229_init(struct pci_dev *dev); - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - /* - * We have to reset AMD PCnet adapter on Rockhopper since - * PMON leaves it enabled and generating interrupts. This leads - * to a lock if some PCI device driver later enables the IRQ line - * shared with PCnet and there is no AMD PCnet driver to catch its - * interrupts. - */ -#ifdef CONFIG_ROCKHOPPER - if (dev->vendor == PCI_VENDOR_ID_AMD && - dev->device == PCI_DEVICE_ID_AMD_LANCE) { - inl(pci_resource_start(dev, 0) + 0x18); - } -#endif - - /* - * we have to open the bridges' windows down to 0 because otherwise - * we cannot access ISA south bridge I/O registers that get mapped from - * 0. for example, 8259 PIC would be unaccessible without that - */ - if(dev->vendor == PCI_VENDOR_ID_INTEL && dev->device == PCI_DEVICE_ID_INTEL_S21152BB) { - pci_write_config_byte(dev, PCI_IO_BASE, 0); - if(dev->bus->number == 0) { - pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0); - } else { - pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 1); - } - } - - return 0; -} - -/* - * M1535 IRQ mapping - * Feel free to change this, although it shouldn't be needed - */ -#define M1535_IRQ_INTA 7 -#define M1535_IRQ_INTB 9 -#define M1535_IRQ_INTC 10 -#define M1535_IRQ_INTD 11 - -#define M1535_IRQ_USB 9 -#define M1535_IRQ_IDE 14 -#define M1535_IRQ_IDE2 15 -#define M1535_IRQ_PS2 12 -#define M1535_IRQ_RTC 8 -#define M1535_IRQ_FDC 6 -#define M1535_IRQ_AUDIO 5 -#define M1535_IRQ_COM1 4 -#define M1535_IRQ_COM2 4 -#define M1535_IRQ_IRDA 3 -#define M1535_IRQ_KBD 1 -#define M1535_IRQ_TMR 0 - -/* Rockhopper "slots" assignment; this is hard-coded ... */ -#define ROCKHOPPER_M5451_SLOT 1 -#define ROCKHOPPER_M1535_SLOT 2 -#define ROCKHOPPER_M5229_SLOT 11 -#define ROCKHOPPER_M5237_SLOT 15 -#define ROCKHOPPER_PMU_SLOT 12 -/* ... and hard-wired. */ -#define ROCKHOPPER_PCI1_SLOT 3 -#define ROCKHOPPER_PCI2_SLOT 4 -#define ROCKHOPPER_PCI3_SLOT 5 -#define ROCKHOPPER_PCI4_SLOT 6 -#define ROCKHOPPER_PCNET_SLOT 1 - -#define M1535_IRQ_MASK(n) (1 << (n)) - -#define M1535_IRQ_EDGE (M1535_IRQ_MASK(M1535_IRQ_TMR) | \ - M1535_IRQ_MASK(M1535_IRQ_KBD) | \ - M1535_IRQ_MASK(M1535_IRQ_COM1) | \ - M1535_IRQ_MASK(M1535_IRQ_COM2) | \ - M1535_IRQ_MASK(M1535_IRQ_IRDA) | \ - M1535_IRQ_MASK(M1535_IRQ_RTC) | \ - M1535_IRQ_MASK(M1535_IRQ_FDC) | \ - M1535_IRQ_MASK(M1535_IRQ_PS2)) - -#define M1535_IRQ_LEVEL (M1535_IRQ_MASK(M1535_IRQ_IDE) | \ - M1535_IRQ_MASK(M1535_IRQ_USB) | \ - M1535_IRQ_MASK(M1535_IRQ_INTA) | \ - M1535_IRQ_MASK(M1535_IRQ_INTB) | \ - M1535_IRQ_MASK(M1535_IRQ_INTC) | \ - M1535_IRQ_MASK(M1535_IRQ_INTD)) - -struct irq_map_entry { - u16 bus; - u8 slot; - u8 irq; -}; -static struct irq_map_entry int_map[] = { - {1, ROCKHOPPER_M5451_SLOT, M1535_IRQ_AUDIO}, /* Audio controller */ - {1, ROCKHOPPER_PCI1_SLOT, M1535_IRQ_INTD}, /* PCI slot #1 */ - {1, ROCKHOPPER_PCI2_SLOT, M1535_IRQ_INTC}, /* PCI slot #2 */ - {1, ROCKHOPPER_M5237_SLOT, M1535_IRQ_USB}, /* USB host controller */ - {1, ROCKHOPPER_M5229_SLOT, IDE_PRIMARY_IRQ}, /* IDE controller */ - {2, ROCKHOPPER_PCNET_SLOT, M1535_IRQ_INTD}, /* AMD Am79c973 on-board - ethernet */ - {2, ROCKHOPPER_PCI3_SLOT, M1535_IRQ_INTB}, /* PCI slot #3 */ - {2, ROCKHOPPER_PCI4_SLOT, M1535_IRQ_INTC} /* PCI slot #4 */ -}; - -static int pci_intlines[] = - { M1535_IRQ_INTA, M1535_IRQ_INTB, M1535_IRQ_INTC, M1535_IRQ_INTD }; - -/* Determine the Rockhopper IRQ line number for the PCI device */ -int rockhopper_get_irq(struct pci_dev *dev, u8 pin, u8 slot) -{ - struct pci_bus *bus; - int i; - - bus = dev->bus; - if (bus == NULL) - return -1; - - for (i = 0; i < ARRAY_SIZE(int_map); i++) { - if (int_map[i].bus == bus->number && int_map[i].slot == slot) { - int line; - for (line = 0; line < 4; line++) - if (pci_intlines[line] == int_map[i].irq) - break; - if (line < 4) - return pci_intlines[(line + (pin - 1)) % 4]; - else - return int_map[i].irq; - } - } - return -1; -} - -#ifdef CONFIG_ROCKHOPPER -void i8259_init(void) -{ - init_i8259_irqs(); - - outb(0x00, 0x4d0); - outb(0x02, 0x4d1); /* USB IRQ9 is level */ -} -#endif - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - pci_probe_only = 1; - -#ifdef CONFIG_ROCKHOPPER - if( dev->bus->number == 1 && vr4133_rockhopper ) { - if(slot == ROCKHOPPER_PCI1_SLOT || slot == ROCKHOPPER_PCI2_SLOT) - dev->irq = CMBVR41XX_INTA_IRQ; - else - dev->irq = rockhopper_get_irq(dev, pin, slot); - } else - dev->irq = CMBVR41XX_INTA_IRQ; -#else - dev->irq = CMBVR41XX_INTA_IRQ; -#endif - - return dev->irq; -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, ali_m1535plus_init); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, ali_m5229_init); - - diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig index 559acc09c819..c1be6b37fb2a 100644 --- a/arch/mips/vr41xx/Kconfig +++ b/arch/mips/vr41xx/Kconfig @@ -23,16 +23,6 @@ config IBM_WORKPAD select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN -config NEC_CMBVR4133 - bool "NEC CMB-VR4133" - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select IRQ_CPU - select HW_HAS_PCI - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - config TANBAC_TB022X bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM" select CEVT_R4K @@ -73,13 +63,6 @@ config ZAO_CAPCELLA endchoice -config ROCKHOPPER - bool "Support for Rockhopper base board" - depends on NEC_CMBVR4133 - select PCI_VR41XX - select I8259 - select HAVE_STD_PC_SERIAL_PORT - choice prompt "Base board type" depends on TANBAC_TB022X diff --git a/arch/mips/vr41xx/nec-cmbvr4133/Makefile b/arch/mips/vr41xx/nec-cmbvr4133/Makefile deleted file mode 100644 index 5835cae54aca..000000000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the NEC-CMBVR4133 -# - -obj-y := init.o setup.o - -obj-$(CONFIG_PCI) += m1535plus.o -obj-$(CONFIG_ROCKHOPPER) += irq.o diff --git a/arch/mips/vr41xx/nec-cmbvr4133/init.c b/arch/mips/vr41xx/nec-cmbvr4133/init.c deleted file mode 100644 index 7c5e18ee2231..000000000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/init.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * arch/mips/vr41xx/nec-cmbvr4133/init.c - * - * PROM library initialisation code for NEC CMB-VR4133 board. - * - * Author: Yoichi Yuasa and - * Jun Sun and - * Alex Sapkov - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for NEC-CMBVR4133 in 2.6 - * Manish Lachwani (mlachwani@mvista.com) - */ - -#ifdef CONFIG_ROCKHOPPER -#include -#include - -#define PCICONFDREG 0xaf000c14 -#define PCICONFAREG 0xaf000c18 - -void disable_pcnet(void) -{ - u32 data; - - /* - * Workaround for the bug in PMON on VR4133. PMON leaves - * AMD PCNet controller (on Rockhopper) initialized and running in - * bus master mode. We have do disable it before doing any - * further initialization. Or we get problems with PCI bus 2 - * and random lockups and crashes. - */ - - writel((2 << 16) | - (PCI_DEVFN(1, 0) << 8) | - (0 & 0xfc) | - 1UL, - PCICONFAREG); - - data = readl(PCICONFDREG); - - writel((2 << 16) | - (PCI_DEVFN(1, 0) << 8) | - (4 & 0xfc) | - 1UL, - PCICONFAREG); - - data = readl(PCICONFDREG); - - writel((2 << 16) | - (PCI_DEVFN(1, 0) << 8) | - (4 & 0xfc) | - 1UL, - PCICONFAREG); - - data &= ~4; - - writel(data, PCICONFDREG); -} -#endif - diff --git a/arch/mips/vr41xx/nec-cmbvr4133/irq.c b/arch/mips/vr41xx/nec-cmbvr4133/irq.c deleted file mode 100644 index 7d2d076b0f54..000000000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/irq.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/mips/vr41xx/nec-cmbvr4133/irq.c - * - * Interrupt routines for the NEC CMB-VR4133 board. - * - * Author: Yoichi Yuasa and - * Alex Sapkov - * - * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for NEC-CMBVR4133 in 2.6 - * Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include -#include -#include - -#include -#include -#include - -extern int vr4133_rockhopper; - -static int i8259_get_irq_number(int irq) -{ - return i8259_irq(); -} - -void __init rockhopper_init_irq(void) -{ - int i; - - if(!vr4133_rockhopper) { - printk(KERN_ERR "Not a Rockhopper Board \n"); - return; - } - - vr41xx_set_irq_trigger(CMBVR41XX_INTC_PIN, TRIGGER_LEVEL, SIGNAL_THROUGH); - vr41xx_set_irq_level(CMBVR41XX_INTC_PIN, LEVEL_HIGH); - vr41xx_cascade_irq(CMBVR41XX_INTC_IRQ, i8259_get_irq_number); -} diff --git a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c b/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c deleted file mode 100644 index 1341f3287d04..000000000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c - * - * Initialize for ALi M1535+(included M5229 and M5237). - * - * Author: Yoichi Yuasa and - * Alex Sapkov - * - * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for NEC-CMBVR4133 in 2.6 - * Author: Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include - -#include -#include -#include - -#define CONFIG_PORT(port) ((port) ? 0x3f0 : 0x370) -#define DATA_PORT(port) ((port) ? 0x3f1 : 0x371) -#define INDEX_PORT(port) CONFIG_PORT(port) - -#define ENTER_CONFIG_MODE(port) \ - do { \ - outb_p(0x51, CONFIG_PORT(port)); \ - outb_p(0x23, CONFIG_PORT(port)); \ - } while(0) - -#define SELECT_LOGICAL_DEVICE(port, dev_no) \ - do { \ - outb_p(0x07, INDEX_PORT(port)); \ - outb_p((dev_no), DATA_PORT(port)); \ - } while(0) - -#define WRITE_CONFIG_DATA(port, index, data) \ - do { \ - outb_p((index), INDEX_PORT(port)); \ - outb_p((data), DATA_PORT(port)); \ - } while(0) - -#define EXIT_CONFIG_MODE(port) outb(0xbb, CONFIG_PORT(port)) - -#define PCI_CONFIG_ADDR KSEG1ADDR(0x0f000c18) -#define PCI_CONFIG_DATA KSEG1ADDR(0x0f000c14) - -#ifdef CONFIG_BLK_DEV_FD - -void __devinit ali_m1535plus_fdc_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 0); /* FDC */ - WRITE_CONFIG_DATA(port, 0x30, 0x01); /* FDC: enable */ - WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x3f0 */ - WRITE_CONFIG_DATA(port, 0x61, 0xf0); - WRITE_CONFIG_DATA(port, 0x70, 0x06); /* IRQ: 6 */ - WRITE_CONFIG_DATA(port, 0x74, 0x02); /* DMA: channel 2 */ - WRITE_CONFIG_DATA(port, 0xf0, 0x08); - WRITE_CONFIG_DATA(port, 0xf1, 0x00); - WRITE_CONFIG_DATA(port, 0xf2, 0xff); - WRITE_CONFIG_DATA(port, 0xf4, 0x00); - EXIT_CONFIG_MODE(port); -} - -#endif - -void __devinit ali_m1535plus_parport_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 3); /* Parallel Port */ - WRITE_CONFIG_DATA(port, 0x30, 0x01); - WRITE_CONFIG_DATA(port, 0x60, 0x03); /* I/O port base: 0x378 */ - WRITE_CONFIG_DATA(port, 0x61, 0x78); - WRITE_CONFIG_DATA(port, 0x70, 0x07); /* IRQ: 7 */ - WRITE_CONFIG_DATA(port, 0x74, 0x04); /* DMA: None */ - WRITE_CONFIG_DATA(port, 0xf0, 0x8c); /* IRQ polarity: Active Low */ - WRITE_CONFIG_DATA(port, 0xf1, 0xc5); - EXIT_CONFIG_MODE(port); -} - -void __devinit ali_m1535plus_keyboard_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 7); /* KEYBOARD */ - WRITE_CONFIG_DATA(port, 0x30, 0x01); /* KEYBOARD: eable */ - WRITE_CONFIG_DATA(port, 0x70, 0x01); /* IRQ: 1 */ - WRITE_CONFIG_DATA(port, 0x72, 0x0c); /* PS/2 Mouse IRQ: 12 */ - WRITE_CONFIG_DATA(port, 0xf0, 0x00); - EXIT_CONFIG_MODE(port); -} - -void __devinit ali_m1535plus_hotkey_init(int port) -{ - ENTER_CONFIG_MODE(port); - SELECT_LOGICAL_DEVICE(port, 0xc); /* HOTKEY */ - WRITE_CONFIG_DATA(port, 0x30, 0x00); - WRITE_CONFIG_DATA(port, 0xf0, 0x35); - WRITE_CONFIG_DATA(port, 0xf1, 0x14); - WRITE_CONFIG_DATA(port, 0xf2, 0x11); - WRITE_CONFIG_DATA(port, 0xf3, 0x71); - WRITE_CONFIG_DATA(port, 0xf5, 0x05); - EXIT_CONFIG_MODE(port); -} - -void ali_m1535plus_init(struct pci_dev *dev) -{ - pci_write_config_byte(dev, 0x40, 0x18); /* PCI Interface Control */ - pci_write_config_byte(dev, 0x41, 0xc0); /* PS2 keyb & mouse enable */ - pci_write_config_byte(dev, 0x42, 0x41); /* ISA bus cycle control */ - pci_write_config_byte(dev, 0x43, 0x00); /* ISA bus cycle control 2 */ - pci_write_config_byte(dev, 0x44, 0x5d); /* IDE enable & IRQ 14 */ - pci_write_config_byte(dev, 0x45, 0x0b); /* PCI int polling mode */ - pci_write_config_byte(dev, 0x47, 0x00); /* BIOS chip select control */ - - /* IRQ routing */ - pci_write_config_byte(dev, 0x48, 0x03); /* INTA IRQ10, INTB disable */ - pci_write_config_byte(dev, 0x49, 0x00); /* INTC and INTD disable */ - pci_write_config_byte(dev, 0x4a, 0x00); /* INTE and INTF disable */ - pci_write_config_byte(dev, 0x4b, 0x90); /* Audio IRQ11, Modem disable */ - - pci_write_config_word(dev, 0x50, 0x4000); /* Parity check IDE enable */ - pci_write_config_word(dev, 0x52, 0x0000); /* USB & RTC disable */ - pci_write_config_word(dev, 0x54, 0x0002); /* ??? no info */ - pci_write_config_word(dev, 0x56, 0x0002); /* PCS1J signal disable */ - - pci_write_config_byte(dev, 0x59, 0x00); /* PCSDS */ - pci_write_config_byte(dev, 0x5a, 0x00); - pci_write_config_byte(dev, 0x5b, 0x00); - pci_write_config_word(dev, 0x5c, 0x0000); - pci_write_config_byte(dev, 0x5e, 0x00); - pci_write_config_byte(dev, 0x5f, 0x00); - pci_write_config_word(dev, 0x60, 0x0000); - - pci_write_config_byte(dev, 0x6c, 0x00); - pci_write_config_byte(dev, 0x6d, 0x48); /* ROM address mapping */ - pci_write_config_byte(dev, 0x6e, 0x00); /* ??? what for? */ - - pci_write_config_byte(dev, 0x70, 0x12); /* Serial IRQ control */ - pci_write_config_byte(dev, 0x71, 0xEF); /* DMA channel select */ - pci_write_config_byte(dev, 0x72, 0x03); /* USB IDSEL */ - pci_write_config_byte(dev, 0x73, 0x00); /* ??? no info */ - - /* - * IRQ setup ALi M5237 USB Host Controller - * IRQ: 9 - */ - pci_write_config_byte(dev, 0x74, 0x01); /* USB IRQ9 */ - - pci_write_config_byte(dev, 0x75, 0x1f); /* IDE2 IRQ 15 */ - pci_write_config_byte(dev, 0x76, 0x80); /* ACPI disable */ - pci_write_config_byte(dev, 0x77, 0x40); /* Modem disable */ - pci_write_config_dword(dev, 0x78, 0x20000000); /* Pin select 2 */ - pci_write_config_byte(dev, 0x7c, 0x00); /* Pin select 3 */ - pci_write_config_byte(dev, 0x81, 0x00); /* ID read/write control */ - pci_write_config_byte(dev, 0x90, 0x00); /* PCI PM block control */ - pci_write_config_word(dev, 0xa4, 0x0000); /* PMSCR */ - -#ifdef CONFIG_BLK_DEV_FD - ali_m1535plus_fdc_init(1); -#endif - - ali_m1535plus_keyboard_init(1); - ali_m1535plus_hotkey_init(1); -} - -static inline void ali_config_writeb(u8 reg, u8 val, int devfn) -{ - u32 data; - int shift; - - writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR); - data = readl(PCI_CONFIG_DATA); - - shift = (reg & 3) << 3; - data &= ~(0xff << shift); - data |= (((u32)val) << shift); - - writel(data, PCI_CONFIG_DATA); -} - -static inline u8 ali_config_readb(u8 reg, int devfn) -{ - u32 data; - - writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR); - data = readl(PCI_CONFIG_DATA); - - return (u8)(data >> ((reg & 3) << 3)); -} - -static inline u16 ali_config_readw(u8 reg, int devfn) -{ - u32 data; - - writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR); - data = readl(PCI_CONFIG_DATA); - - return (u16)(data >> ((reg & 2) << 3)); -} - -int vr4133_rockhopper = 0; -void __init ali_m5229_preinit(void) -{ - if (ali_config_readw(PCI_VENDOR_ID, 16) == PCI_VENDOR_ID_AL && - ali_config_readw(PCI_DEVICE_ID, 16) == PCI_DEVICE_ID_AL_M1533) { - printk(KERN_INFO "Found an NEC Rockhopper \n"); - vr4133_rockhopper = 1; - /* - * Enable ALi M5229 IDE Controller (both channels) - * IDSEL: A27 - */ - ali_config_writeb(0x58, 0x4c, 16); - } -} - -void __init ali_m5229_init(struct pci_dev *dev) -{ - /* - * Enable Primary/Secondary Channel Cable Detect 40-Pin - */ - pci_write_config_word(dev, 0x4a, 0xc023); - - /* - * Set only the 3rd byteis for the master IDE's cycle and - * enable Internal IDE Function - */ - pci_write_config_byte(dev, 0x50, 0x23); /* Class code attr register */ - - pci_write_config_byte(dev, 0x09, 0xff); /* Set native mode & stuff */ - pci_write_config_byte(dev, 0x52, 0x00); /* use timing registers */ - pci_write_config_byte(dev, 0x58, 0x02); /* Primary addr setup timing */ - pci_write_config_byte(dev, 0x59, 0x22); /* Primary cmd block timing */ - pci_write_config_byte(dev, 0x5a, 0x22); /* Pr drv 0 R/W timing */ - pci_write_config_byte(dev, 0x5b, 0x22); /* Pr drv 1 R/W timing */ - pci_write_config_byte(dev, 0x5c, 0x02); /* Sec addr setup timing */ - pci_write_config_byte(dev, 0x5d, 0x22); /* Sec cmd block timing */ - pci_write_config_byte(dev, 0x5e, 0x22); /* Sec drv 0 R/W timing */ - pci_write_config_byte(dev, 0x5f, 0x22); /* Sec drv 1 R/W timing */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20); - pci_write_config_word(dev, PCI_COMMAND, - PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | - PCI_COMMAND_IO); -} - diff --git a/arch/mips/vr41xx/nec-cmbvr4133/setup.c b/arch/mips/vr41xx/nec-cmbvr4133/setup.c deleted file mode 100644 index 7723d2011b08..000000000000 --- a/arch/mips/vr41xx/nec-cmbvr4133/setup.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/mips/vr41xx/nec-cmbvr4133/setup.c - * - * Setup for the NEC CMB-VR4133. - * - * Author: Yoichi Yuasa and - * Alex Sapkov - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for CMBVR4133 board in 2.6 - * Author: Manish Lachwani (mlachwani@mvista.com) - */ -#include -#include -#include - -#include -#include -#include -#include - -#ifdef CONFIG_MTD -#include -#include -#include -#include - -static struct mtd_partition cmbvr4133_mtd_parts[] = { - { - .name = "User FS", - .size = 0x1be0000, - .offset = 0, - .mask_flags = 0, - }, - { - .name = "PMON", - .size = 0x140000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "User FS2", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - .mask_flags = 0, - } -}; - -#define number_partitions ARRAY_SIZE(cmbvr4133_mtd_parts) -#endif - -extern void i8259_init(void); - -static void __init nec_cmbvr4133_setup(void) -{ -#ifdef CONFIG_ROCKHOPPER - extern void disable_pcnet(void); - - disable_pcnet(); -#endif - set_io_port_base(KSEG1ADDR(0x16000000)); - -#ifdef CONFIG_PCI -#ifdef CONFIG_ROCKHOPPER - ali_m5229_preinit(); -#endif -#endif - -#ifdef CONFIG_ROCKHOPPER - rockhopper_init_irq(); -#endif - -#ifdef CONFIG_MTD - /* we use generic physmap mapping driver and we use partitions */ - physmap_configure(0x1C000000, 0x02000000, 4, NULL); - physmap_set_partitions(cmbvr4133_mtd_parts, number_partitions); -#endif - - /* 128 MB memory support */ - add_memory_region(0, 0x08000000, BOOT_MEM_RAM); - -#ifdef CONFIG_ROCKHOPPER - i8259_init(); -#endif -} diff --git a/include/asm-mips/mach-vr41xx/irq.h b/include/asm-mips/mach-vr41xx/irq.h index 848812296052..862058d3f81b 100644 --- a/include/asm-mips/mach-vr41xx/irq.h +++ b/include/asm-mips/mach-vr41xx/irq.h @@ -2,9 +2,6 @@ #define __ASM_MACH_VR41XX_IRQ_H #include /* for MIPS_CPU_IRQ_BASE */ -#ifdef CONFIG_NEC_CMBVR4133 -#include /* for I8259A_IRQ_BASE */ -#endif #include_next diff --git a/include/asm-mips/vr41xx/cmbvr4133.h b/include/asm-mips/vr41xx/cmbvr4133.h deleted file mode 100644 index 42300037d593..000000000000 --- a/include/asm-mips/vr41xx/cmbvr4133.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * include/asm-mips/vr41xx/cmbvr4133.h - * - * Include file for NEC CMB-VR4133. - * - * Author: Yoichi Yuasa and - * Jun Sun and - * Alex Sapkov - * - * 2002-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __NEC_CMBVR4133_H -#define __NEC_CMBVR4133_H - -#include - -/* - * General-Purpose I/O Pin Number - */ -#define CMBVR41XX_INTA_PIN 1 -#define CMBVR41XX_INTB_PIN 1 -#define CMBVR41XX_INTC_PIN 3 -#define CMBVR41XX_INTD_PIN 1 -#define CMBVR41XX_INTE_PIN 1 - -/* - * Interrupt Number - */ -#define CMBVR41XX_INTA_IRQ GIU_IRQ(CMBVR41XX_INTA_PIN) -#define CMBVR41XX_INTB_IRQ GIU_IRQ(CMBVR41XX_INTB_PIN) -#define CMBVR41XX_INTC_IRQ GIU_IRQ(CMBVR41XX_INTC_PIN) -#define CMBVR41XX_INTD_IRQ GIU_IRQ(CMBVR41XX_INTD_PIN) -#define CMBVR41XX_INTE_IRQ GIU_IRQ(CMBVR41XX_INTE_PIN) - -#define I8259A_IRQ_BASE 72 -#define I8259_IRQ(x) (I8259A_IRQ_BASE + (x)) -#define TIMER_IRQ I8259_IRQ(0) -#define KEYBOARD_IRQ I8259_IRQ(1) -#define I8259_SLAVE_IRQ I8259_IRQ(2) -#define UART3_IRQ I8259_IRQ(3) -#define UART1_IRQ I8259_IRQ(4) -#define UART2_IRQ I8259_IRQ(5) -#define FDC_IRQ I8259_IRQ(6) -#define PARPORT_IRQ I8259_IRQ(7) -#define RTC_IRQ I8259_IRQ(8) -#define USB_IRQ I8259_IRQ(9) -#define I8259_INTA_IRQ I8259_IRQ(10) -#define AUDIO_IRQ I8259_IRQ(11) -#define AUX_IRQ I8259_IRQ(12) -#define IDE_PRIMARY_IRQ I8259_IRQ(14) -#define IDE_SECONDARY_IRQ I8259_IRQ(15) - -#endif /* __NEC_CMBVR4133_H */ -- cgit v1.2.3 From b03d7b18fd783f39e31560d568e7db954f3080af Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Fri, 11 Jul 2008 23:03:03 +0200 Subject: [MIPS] IP22: Add platform device for Indy volume buttons Create platform device for Indy volume buttons and remove button handling from ip22-reset.c Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip22/ip22-platform.c | 11 ++++++++ arch/mips/sgi-ip22/ip22-reset.c | 51 ++------------------------------------ 2 files changed, 13 insertions(+), 49 deletions(-) diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c index d93d07a8c317..fc6df96305ed 100644 --- a/arch/mips/sgi-ip22/ip22-platform.c +++ b/arch/mips/sgi-ip22/ip22-platform.c @@ -182,3 +182,14 @@ static int __init sgi_hal2_devinit(void) } device_initcall(sgi_hal2_devinit); + +static int __init sgi_button_devinit(void) +{ + if (ip22_is_fullhouse()) + return 0; /* full house has no volume buttons */ + + return IS_ERR(platform_device_register_simple("sgiindybtns", + -1, NULL, 0)); +} + +device_initcall(sgi_button_devinit); diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c index a435b31cf031..4ad5c3393fd3 100644 --- a/arch/mips/sgi-ip22/ip22-reset.c +++ b/arch/mips/sgi-ip22/ip22-reset.c @@ -39,7 +39,7 @@ #define POWERDOWN_FREQ (HZ / 4) #define PANIC_FREQ (HZ / 8) -static struct timer_list power_timer, blink_timer, debounce_timer, volume_timer; +static struct timer_list power_timer, blink_timer, debounce_timer; #define MACHINE_PANICED 1 #define MACHINE_SHUTTING_DOWN 2 @@ -139,36 +139,6 @@ static inline void power_button(void) add_timer(&power_timer); } -void (*indy_volume_button)(int) = NULL; - -EXPORT_SYMBOL(indy_volume_button); - -static inline void volume_up_button(unsigned long data) -{ - del_timer(&volume_timer); - - if (indy_volume_button) - indy_volume_button(1); - - if (sgint->istat1 & SGINT_ISTAT1_PWR) { - volume_timer.expires = jiffies + (HZ / 100); - add_timer(&volume_timer); - } -} - -static inline void volume_down_button(unsigned long data) -{ - del_timer(&volume_timer); - - if (indy_volume_button) - indy_volume_button(-1); - - if (sgint->istat1 & SGINT_ISTAT1_PWR) { - volume_timer.expires = jiffies + (HZ / 100); - add_timer(&volume_timer); - } -} - static irqreturn_t panel_int(int irq, void *dev_id) { unsigned int buttons; @@ -190,25 +160,8 @@ static irqreturn_t panel_int(int irq, void *dev_id) * House. Only lowest 2 bits are used. Guiness uses upper four bits * for volume control". This is not true, all bits are pulled high * on fullhouse */ - if (ip22_is_fullhouse() || !(buttons & SGIOC_PANEL_POWERINTR)) { + if (!(buttons & SGIOC_PANEL_POWERINTR)) power_button(); - return IRQ_HANDLED; - } - /* TODO: mute/unmute */ - /* Volume up button was pressed */ - if (!(buttons & SGIOC_PANEL_VOLUPINTR)) { - init_timer(&volume_timer); - volume_timer.function = volume_up_button; - volume_timer.expires = jiffies + (HZ / 100); - add_timer(&volume_timer); - } - /* Volume down button was pressed */ - if (!(buttons & SGIOC_PANEL_VOLDNINTR)) { - init_timer(&volume_timer); - volume_timer.function = volume_down_button; - volume_timer.expires = jiffies + (HZ / 100); - add_timer(&volume_timer); - } return IRQ_HANDLED; } -- cgit v1.2.3 From 7a1fdf1946b641f7c2866b3386414657eeb88084 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 13 Jul 2008 19:51:55 +0900 Subject: [MIPS] txx9_board_vec set directly without mips_machtype Signed-off-by: Yoichi Yuasa Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 34 ++++++++-------------------------- 1 file changed, 8 insertions(+), 26 deletions(-) diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 66ff74f80c6b..517828e1ec92 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -99,19 +99,6 @@ extern struct txx9_board_vec rbtx4927_vec; extern struct txx9_board_vec rbtx4937_vec; extern struct txx9_board_vec rbtx4938_vec; -/* board definitions */ -static struct txx9_board_vec *board_vecs[] __initdata = { -#ifdef CONFIG_TOSHIBA_JMR3927 - &jmr3927_vec, -#endif -#ifdef CONFIG_TOSHIBA_RBTX4927 - &rbtx4927_vec, - &rbtx4937_vec, -#endif -#ifdef CONFIG_TOSHIBA_RBTX4938 - &rbtx4938_vec, -#endif -}; struct txx9_board_vec *txx9_board_vec __initdata; static char txx9_system_type[32]; @@ -134,31 +121,26 @@ void __init prom_init_cmdline(void) void __init prom_init(void) { - int i; - #ifdef CONFIG_CPU_TX39XX - mips_machtype = MACH_TOSHIBA_JMR3927; + txx9_board_vec = &jmr3927_vec; #endif #ifdef CONFIG_CPU_TX49XX switch (TX4938_REV_PCODE()) { case 0x4927: - mips_machtype = MACH_TOSHIBA_RBTX4927; + txx9_board_vec = &rbtx4927_vec; break; case 0x4937: - mips_machtype = MACH_TOSHIBA_RBTX4937; + txx9_board_vec = &rbtx4937_vec; break; case 0x4938: - mips_machtype = MACH_TOSHIBA_RBTX4938; + txx9_board_vec = &rbtx4938_vec; break; } #endif - for (i = 0; i < ARRAY_SIZE(board_vecs); i++) { - if (board_vecs[i]->type == mips_machtype) { - txx9_board_vec = board_vecs[i]; - strcpy(txx9_system_type, txx9_board_vec->system); - return txx9_board_vec->prom_init(); - } - } + + strcpy(txx9_system_type, txx9_board_vec->system); + + return txx9_board_vec->prom_init(); } void __init prom_free_prom_memory(void) -- cgit v1.2.3 From a00fb6694f15b3bccf105f34f10bbcb6b47af67c Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 13 Jul 2008 19:54:08 +0900 Subject: [MIPS] txx9_cpu_clock setup move to rbtx4927_time_init() Signed-off-by: Yoichi Yuasa Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/rbtx4927/setup.c | 98 ++++++++++++++++++++--------------------- 1 file changed, 49 insertions(+), 49 deletions(-) diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index c3566c39c26c..bba6ef9db068 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -252,55 +252,6 @@ static void __init rbtx4927_mem_setup(void) set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET); #endif - /* - * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. - * - * For TX4927: - * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1). - * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5) - * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3) - * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) - * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) - * i.e. S9[3]: ON (83MHz), OFF (100MHz) - * - * For TX4937: - * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) - * PCIDIVMODE[10] is 0. - * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8) - * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4) - * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9) - * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5) - * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) - * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) - * - */ - if (mips_machtype == MACH_TOSHIBA_RBTX4937) - switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) & - TX4938_CCFG_PCIDIVMODE_MASK) { - case TX4938_CCFG_PCIDIVMODE_8: - case TX4938_CCFG_PCIDIVMODE_4: - txx9_cpu_clock = 266666666; /* 266MHz */ - break; - case TX4938_CCFG_PCIDIVMODE_9: - case TX4938_CCFG_PCIDIVMODE_4_5: - txx9_cpu_clock = 300000000; /* 300MHz */ - break; - default: - txx9_cpu_clock = 333333333; /* 333MHz */ - } - else - switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) & - TX4927_CCFG_PCIDIVMODE_MASK) { - case TX4927_CCFG_PCIDIVMODE_2_5: - case TX4927_CCFG_PCIDIVMODE_5: - txx9_cpu_clock = 166666666; /* 166MHz */ - break; - default: - txx9_cpu_clock = 200000000; /* 200MHz */ - } - /* change default value to udelay/mdelay take reasonable time */ - loops_per_jiffy = txx9_cpu_clock / HZ / 2; - /* CCFG */ /* do reset on watchdog */ tx4927_ccfg_set(TX4927_CCFG_WR); @@ -349,6 +300,55 @@ static void __init rbtx4927_mem_setup(void) static void __init rbtx4927_time_init(void) { + /* + * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. + * + * For TX4927: + * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1). + * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5) + * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3) + * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) + * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) + * i.e. S9[3]: ON (83MHz), OFF (100MHz) + * + * For TX4937: + * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) + * PCIDIVMODE[10] is 0. + * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8) + * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4) + * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9) + * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5) + * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) + * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) + */ + if (mips_machtype == MACH_TOSHIBA_RBTX4937) + switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) & + TX4938_CCFG_PCIDIVMODE_MASK) { + case TX4938_CCFG_PCIDIVMODE_8: + case TX4938_CCFG_PCIDIVMODE_4: + txx9_cpu_clock = 266666666; /* 266MHz */ + break; + case TX4938_CCFG_PCIDIVMODE_9: + case TX4938_CCFG_PCIDIVMODE_4_5: + txx9_cpu_clock = 300000000; /* 300MHz */ + break; + default: + txx9_cpu_clock = 333333333; /* 333MHz */ + } + else + switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) & + TX4927_CCFG_PCIDIVMODE_MASK) { + case TX4927_CCFG_PCIDIVMODE_2_5: + case TX4927_CCFG_PCIDIVMODE_5: + txx9_cpu_clock = 166666666; /* 166MHz */ + break; + default: + txx9_cpu_clock = 200000000; /* 200MHz */ + } + + /* change default value to udelay/mdelay take reasonable time */ + loops_per_jiffy = txx9_cpu_clock / HZ / 2; + mips_hpt_frequency = txx9_cpu_clock / 2; if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS) txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL, -- cgit v1.2.3 From a38c47519832f22659244fd8437722b7aaa67f9a Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 13 Jul 2008 20:01:04 +0900 Subject: [MIPS] separate rbtx4927_arch_init() and rbtx4937_arch_init() Signed-off-by: Yoichi Yuasa Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/rbtx4927/setup.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index bba6ef9db068..b4c4178607c4 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -170,13 +170,16 @@ static void __init tx4937_pci_setup(void) static void __init rbtx4927_arch_init(void) { - if (mips_machtype == MACH_TOSHIBA_RBTX4937) - tx4937_pci_setup(); - else - tx4927_pci_setup(); + tx4927_pci_setup(); +} + +static void __init rbtx4937_arch_init(void) +{ + tx4937_pci_setup(); } #else #define rbtx4927_arch_init NULL +#define rbtx4937_arch_init NULL #endif /* CONFIG_PCI */ static void __noreturn wait_forever(void) @@ -433,7 +436,7 @@ struct txx9_board_vec rbtx4937_vec __initdata = { .irq_setup = rbtx4927_irq_setup, .time_init = rbtx4927_time_init, .device_init = rbtx4927_device_init, - .arch_init = rbtx4927_arch_init, + .arch_init = rbtx4937_arch_init, #ifdef CONFIG_PCI .pci_map_irq = rbtx4927_pci_map_irq, #endif -- cgit v1.2.3 From b6c4053610f04011bc0ecbc5a0417afe169b2693 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 13 Jul 2008 20:02:13 +0900 Subject: [MIPS] separate rbtx4927_time_init() and rbtx4937_time_init() Signed-off-by: Yoichi Yuasa Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/rbtx4927/setup.c | 78 ++++++++++++++++++++++++----------------- 1 file changed, 45 insertions(+), 33 deletions(-) diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index b4c4178607c4..adc91c0bbb95 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -301,6 +301,18 @@ static void __init rbtx4927_mem_setup(void) #endif } +static void __init rbtx49x7_common_time_init(void) +{ + /* change default value to udelay/mdelay take reasonable time */ + loops_per_jiffy = txx9_cpu_clock / HZ / 2; + + mips_hpt_frequency = txx9_cpu_clock / 2; + if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS) + txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL, + TXX9_IRQ_BASE + 17, + 50000000); +} + static void __init rbtx4927_time_init(void) { /* @@ -313,6 +325,24 @@ static void __init rbtx4927_time_init(void) * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5) * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6) * i.e. S9[3]: ON (83MHz), OFF (100MHz) + */ + switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) & + TX4927_CCFG_PCIDIVMODE_MASK) { + case TX4927_CCFG_PCIDIVMODE_2_5: + case TX4927_CCFG_PCIDIVMODE_5: + txx9_cpu_clock = 166666666; /* 166MHz */ + break; + default: + txx9_cpu_clock = 200000000; /* 200MHz */ + } + + rbtx49x7_common_time_init(); +} + +static void __init rbtx4937_time_init(void) +{ + /* + * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz. * * For TX4937: * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1) @@ -324,39 +354,21 @@ static void __init rbtx4927_time_init(void) * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10) * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5) */ - if (mips_machtype == MACH_TOSHIBA_RBTX4937) - switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) & - TX4938_CCFG_PCIDIVMODE_MASK) { - case TX4938_CCFG_PCIDIVMODE_8: - case TX4938_CCFG_PCIDIVMODE_4: - txx9_cpu_clock = 266666666; /* 266MHz */ - break; - case TX4938_CCFG_PCIDIVMODE_9: - case TX4938_CCFG_PCIDIVMODE_4_5: - txx9_cpu_clock = 300000000; /* 300MHz */ - break; - default: - txx9_cpu_clock = 333333333; /* 333MHz */ - } - else - switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) & - TX4927_CCFG_PCIDIVMODE_MASK) { - case TX4927_CCFG_PCIDIVMODE_2_5: - case TX4927_CCFG_PCIDIVMODE_5: - txx9_cpu_clock = 166666666; /* 166MHz */ - break; - default: - txx9_cpu_clock = 200000000; /* 200MHz */ - } - - /* change default value to udelay/mdelay take reasonable time */ - loops_per_jiffy = txx9_cpu_clock / HZ / 2; + switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) & + TX4938_CCFG_PCIDIVMODE_MASK) { + case TX4938_CCFG_PCIDIVMODE_8: + case TX4938_CCFG_PCIDIVMODE_4: + txx9_cpu_clock = 266666666; /* 266MHz */ + break; + case TX4938_CCFG_PCIDIVMODE_9: + case TX4938_CCFG_PCIDIVMODE_4_5: + txx9_cpu_clock = 300000000; /* 300MHz */ + break; + default: + txx9_cpu_clock = 333333333; /* 333MHz */ + } - mips_hpt_frequency = txx9_cpu_clock / 2; - if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS) - txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL, - TXX9_IRQ_BASE + 17, - 50000000); + rbtx49x7_common_time_init(); } static int __init toshiba_rbtx4927_rtc_init(void) @@ -434,7 +446,7 @@ struct txx9_board_vec rbtx4937_vec __initdata = { .prom_init = rbtx4927_prom_init, .mem_setup = rbtx4927_mem_setup, .irq_setup = rbtx4927_irq_setup, - .time_init = rbtx4927_time_init, + .time_init = rbtx4937_time_init, .device_init = rbtx4927_device_init, .arch_init = rbtx4937_arch_init, #ifdef CONFIG_PCI -- cgit v1.2.3 From 6e68665e51b9937b132a990b9ae7f04118e64688 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Sun, 13 Jul 2008 20:04:18 +0900 Subject: [MIPS] remove machtype for group Toshiba Signed-off-by: Yoichi Yuasa Acked-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/jmr3927/setup.c | 1 - arch/mips/txx9/rbtx4927/setup.c | 2 -- arch/mips/txx9/rbtx4938/setup.c | 1 - include/asm-mips/bootinfo.h | 11 ----------- include/asm-mips/txx9/generic.h | 1 - 5 files changed, 16 deletions(-) diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 128a4ae3e72e..43a8dad22ef7 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -366,7 +366,6 @@ static void __init jmr3927_device_init(void) } struct txx9_board_vec jmr3927_vec __initdata = { - .type = MACH_TOSHIBA_JMR3927, .system = "Toshiba JMR_TX3927", .prom_init = jmr3927_prom_init, .mem_setup = jmr3927_mem_setup, diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index adc91c0bbb95..aba11f376a51 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -428,7 +428,6 @@ static void __init rbtx4927_device_init(void) } struct txx9_board_vec rbtx4927_vec __initdata = { - .type = MACH_TOSHIBA_RBTX4927, .system = "Toshiba RBTX4927", .prom_init = rbtx4927_prom_init, .mem_setup = rbtx4927_mem_setup, @@ -441,7 +440,6 @@ struct txx9_board_vec rbtx4927_vec __initdata = { #endif }; struct txx9_board_vec rbtx4937_vec __initdata = { - .type = MACH_TOSHIBA_RBTX4937, .system = "Toshiba RBTX4937", .prom_init = rbtx4927_prom_init, .mem_setup = rbtx4927_mem_setup, diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 8306ba333dda..2ef71adea827 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -619,7 +619,6 @@ static void __init rbtx4938_device_init(void) } struct txx9_board_vec rbtx4938_vec __initdata = { - .type = MACH_TOSHIBA_RBTX4938, .system = "Toshiba RBTX4938", .prom_init = rbtx4938_prom_init, .mem_setup = rbtx4938_mem_setup, diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index e031bdff9920..c70848d4f632 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -61,17 +61,6 @@ #define MACH_SGI_IP32 3 /* O2 */ #define MACH_SGI_IP30 4 /* Octane, Octane2 */ -/* - * Valid machtypes for group Toshiba - */ -#define MACH_PALLAS 0 -#define MACH_TOPAS 1 -#define MACH_JMR 2 -#define MACH_TOSHIBA_JMR3927 3 /* JMR-TX3927 CPU/IO board */ -#define MACH_TOSHIBA_RBTX4927 4 -#define MACH_TOSHIBA_RBTX4937 5 -#define MACH_TOSHIBA_RBTX4938 6 - /* * Valid machtype for group LASAT */ diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index 6cd147764f19..715d7c8ade5c 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -22,7 +22,6 @@ extern unsigned int txx9_gbus_clock; struct pci_dev; struct txx9_board_vec { - unsigned long type; const char *system; void (*prom_init)(void); void (*mem_setup)(void); -- cgit v1.2.3 From 4c642f3f5e9f3f1a2fcce2c3fa1a94bf80142202 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 13 Jul 2008 23:37:56 +0900 Subject: [MIPS] TXx9: rename asm-mips/mach-jmr3927 to asm-mips/mach-tx39xx Rename mach-jmr3927 directory to more proper name to make adding other platforms easier. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 2 +- arch/mips/txx9/generic/setup.c | 10 ++++++++ arch/mips/txx9/jmr3927/setup.c | 4 +-- include/asm-mips/mach-jmr3927/ioremap.h | 38 ----------------------------- include/asm-mips/mach-jmr3927/mangle-port.h | 18 -------------- include/asm-mips/mach-jmr3927/war.h | 25 ------------------- include/asm-mips/mach-tx39xx/ioremap.h | 38 +++++++++++++++++++++++++++++ include/asm-mips/mach-tx39xx/mangle-port.h | 23 +++++++++++++++++ include/asm-mips/mach-tx39xx/war.h | 25 +++++++++++++++++++ 9 files changed, 99 insertions(+), 84 deletions(-) delete mode 100644 include/asm-mips/mach-jmr3927/ioremap.h delete mode 100644 include/asm-mips/mach-jmr3927/mangle-port.h delete mode 100644 include/asm-mips/mach-jmr3927/war.h create mode 100644 include/asm-mips/mach-tx39xx/ioremap.h create mode 100644 include/asm-mips/mach-tx39xx/mangle-port.h create mode 100644 include/asm-mips/mach-tx39xx/war.h diff --git a/arch/mips/Makefile b/arch/mips/Makefile index c4a3098a58c6..356453322b49 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -548,7 +548,7 @@ all-$(CONFIG_SNI_RM) := vmlinux.ecoff # Common TXx9 # core-$(CONFIG_MACH_TX39XX) += arch/mips/txx9/generic/ -cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-jmr3927 +cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-tx39xx load-$(CONFIG_MACH_TX39XX) += 0xffffffff80050000 core-$(CONFIG_MACH_TX49XX) += arch/mips/txx9/generic/ cflags-$(CONFIG_MACH_TX49XX) += -Iinclude/asm-mips/mach-tx49xx diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 517828e1ec92..452cb9ea12c0 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -200,3 +200,13 @@ asmlinkage void plat_irq_dispatch(void) else spurious_interrupt(); } + +/* see include/asm-mips/mach-tx39xx/mangle-port.h, for example. */ +#ifdef NEEDS_TXX9_SWIZZLE_ADDR_B +static unsigned long __swizzle_addr_none(unsigned long port) +{ + return port; +} +unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none; +EXPORT_SYMBOL(__swizzle_addr_b); +#endif diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 43a8dad22ef7..61edc4ac1dbc 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -315,7 +315,7 @@ static void __init tx3927_setup(void) } /* This trick makes rtc-ds1742 driver usable as is. */ -unsigned long __swizzle_addr_b(unsigned long port) +static unsigned long jmr3927_swizzle_addr_b(unsigned long port) { if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR) return port; @@ -326,7 +326,6 @@ unsigned long __swizzle_addr_b(unsigned long port) return port | 1; #endif } -EXPORT_SYMBOL(__swizzle_addr_b); static int __init jmr3927_rtc_init(void) { @@ -361,6 +360,7 @@ static int __init jmr3927_wdt_init(void) static void __init jmr3927_device_init(void) { + __swizzle_addr_b = jmr3927_swizzle_addr_b; jmr3927_rtc_init(); jmr3927_wdt_init(); } diff --git a/include/asm-mips/mach-jmr3927/ioremap.h b/include/asm-mips/mach-jmr3927/ioremap.h deleted file mode 100644 index 29989ff10d66..000000000000 --- a/include/asm-mips/mach-jmr3927/ioremap.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * include/asm-mips/mach-jmr3927/ioremap.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_MACH_JMR3927_IOREMAP_H -#define __ASM_MACH_JMR3927_IOREMAP_H - -#include - -/* - * Allow physical addresses to be fixed up to help peripherals located - * outside the low 32-bit range -- generic pass-through version. - */ -static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) -{ - return phys_addr; -} - -static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, - unsigned long flags) -{ -#define TXX9_DIRECTMAP_BASE 0xff000000ul - if (offset >= TXX9_DIRECTMAP_BASE && - offset < TXX9_DIRECTMAP_BASE + 0xff0000) - return (void __iomem *)offset; - return NULL; -} - -static inline int plat_iounmap(const volatile void __iomem *addr) -{ - return (unsigned long)addr >= TXX9_DIRECTMAP_BASE; -} - -#endif /* __ASM_MACH_JMR3927_IOREMAP_H */ diff --git a/include/asm-mips/mach-jmr3927/mangle-port.h b/include/asm-mips/mach-jmr3927/mangle-port.h deleted file mode 100644 index 11bffcd1043b..000000000000 --- a/include/asm-mips/mach-jmr3927/mangle-port.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef __ASM_MACH_JMR3927_MANGLE_PORT_H -#define __ASM_MACH_JMR3927_MANGLE_PORT_H - -extern unsigned long __swizzle_addr_b(unsigned long port); -#define __swizzle_addr_w(port) (port) -#define __swizzle_addr_l(port) (port) -#define __swizzle_addr_q(port) (port) - -#define ioswabb(a, x) (x) -#define __mem_ioswabb(a, x) (x) -#define ioswabw(a, x) le16_to_cpu(x) -#define __mem_ioswabw(a, x) (x) -#define ioswabl(a, x) le32_to_cpu(x) -#define __mem_ioswabl(a, x) (x) -#define ioswabq(a, x) le64_to_cpu(x) -#define __mem_ioswabq(a, x) (x) - -#endif /* __ASM_MACH_JMR3927_MANGLE_PORT_H */ diff --git a/include/asm-mips/mach-jmr3927/war.h b/include/asm-mips/mach-jmr3927/war.h deleted file mode 100644 index 1ff55fb3fbcb..000000000000 --- a/include/asm-mips/mach-jmr3927/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_JMR3927_WAR_H -#define __ASM_MIPS_MACH_JMR3927_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_JMR3927_WAR_H */ diff --git a/include/asm-mips/mach-tx39xx/ioremap.h b/include/asm-mips/mach-tx39xx/ioremap.h new file mode 100644 index 000000000000..93c6c04ffda3 --- /dev/null +++ b/include/asm-mips/mach-tx39xx/ioremap.h @@ -0,0 +1,38 @@ +/* + * include/asm-mips/mach-tx39xx/ioremap.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#ifndef __ASM_MACH_TX39XX_IOREMAP_H +#define __ASM_MACH_TX39XX_IOREMAP_H + +#include + +/* + * Allow physical addresses to be fixed up to help peripherals located + * outside the low 32-bit range -- generic pass-through version. + */ +static inline phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size) +{ + return phys_addr; +} + +static inline void __iomem *plat_ioremap(phys_t offset, unsigned long size, + unsigned long flags) +{ +#define TXX9_DIRECTMAP_BASE 0xff000000ul + if (offset >= TXX9_DIRECTMAP_BASE && + offset < TXX9_DIRECTMAP_BASE + 0xff0000) + return (void __iomem *)offset; + return NULL; +} + +static inline int plat_iounmap(const volatile void __iomem *addr) +{ + return (unsigned long)addr >= TXX9_DIRECTMAP_BASE; +} + +#endif /* __ASM_MACH_TX39XX_IOREMAP_H */ diff --git a/include/asm-mips/mach-tx39xx/mangle-port.h b/include/asm-mips/mach-tx39xx/mangle-port.h new file mode 100644 index 000000000000..ef0b502fd8b7 --- /dev/null +++ b/include/asm-mips/mach-tx39xx/mangle-port.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MACH_TX39XX_MANGLE_PORT_H +#define __ASM_MACH_TX39XX_MANGLE_PORT_H + +#if defined(CONFIG_TOSHIBA_JMR3927) +extern unsigned long (*__swizzle_addr_b)(unsigned long port); +#define NEEDS_TXX9_SWIZZLE_ADDR_B +#else +#define __swizzle_addr_b(port) (port) +#endif +#define __swizzle_addr_w(port) (port) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +#define ioswabb(a, x) (x) +#define __mem_ioswabb(a, x) (x) +#define ioswabw(a, x) le16_to_cpu(x) +#define __mem_ioswabw(a, x) (x) +#define ioswabl(a, x) le32_to_cpu(x) +#define __mem_ioswabl(a, x) (x) +#define ioswabq(a, x) le64_to_cpu(x) +#define __mem_ioswabq(a, x) (x) + +#endif /* __ASM_MACH_TX39XX_MANGLE_PORT_H */ diff --git a/include/asm-mips/mach-tx39xx/war.h b/include/asm-mips/mach-tx39xx/war.h new file mode 100644 index 000000000000..433814616359 --- /dev/null +++ b/include/asm-mips/mach-tx39xx/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_TX39XX_WAR_H +#define __ASM_MIPS_MACH_TX39XX_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_TX39XX_WAR_H */ -- cgit v1.2.3 From 7b22609442a32050e37cec5f6735376af61e68a1 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 14 Jul 2008 00:15:04 +0900 Subject: [MIPS] TXx9: cleanup and fix some sparse warnings * Do not return void value * Make some functions static * Do not include unnecessary bootinfo.h Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 2 +- arch/mips/txx9/jmr3927/setup.c | 3 --- arch/mips/txx9/rbtx4927/setup.c | 16 +++------------- arch/mips/txx9/rbtx4938/setup.c | 13 +++---------- include/asm-mips/txx9/generic.h | 1 + 5 files changed, 8 insertions(+), 27 deletions(-) diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 452cb9ea12c0..5afc5d5cab03 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -140,7 +140,7 @@ void __init prom_init(void) strcpy(txx9_system_type, txx9_board_vec->system); - return txx9_board_vec->prom_init(); + txx9_board_vec->prom_init(); } void __init prom_free_prom_memory(void) diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 61edc4ac1dbc..5e35ef73c5a5 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -38,8 +38,6 @@ #ifdef CONFIG_SERIAL_TXX9 #include #endif - -#include #include #include #include @@ -95,7 +93,6 @@ static void __init jmr3927_time_init(void) #define DO_WRITE_THROUGH #define DO_ENABLE_CACHE -extern char * __init prom_getcmdline(void); static void jmr3927_board_init(void); static void __init jmr3927_mem_setup(void) diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index aba11f376a51..1657fd935da8 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -50,8 +50,6 @@ #include #include #include - -#include #include #include #include @@ -65,14 +63,6 @@ #include #endif -/* These functions are used for rebooting or halting the machine*/ -extern void toshiba_rbtx4927_restart(char *command); -extern void toshiba_rbtx4927_halt(void); -extern void toshiba_rbtx4927_power_off(void); -extern void toshiba_rbtx4927_irq_setup(void); - -char *prom_getcmdline(void); - static int tx4927_ccfg_toeon = 1; #ifdef CONFIG_PCI @@ -189,7 +179,7 @@ static void __noreturn wait_forever(void) (*cpu_wait)(); } -void toshiba_rbtx4927_restart(char *command) +static void toshiba_rbtx4927_restart(char *command) { printk(KERN_NOTICE "System Rebooting...\n"); @@ -209,7 +199,7 @@ void toshiba_rbtx4927_restart(char *command) /* no return */ } -void toshiba_rbtx4927_halt(void) +static void toshiba_rbtx4927_halt(void) { printk(KERN_NOTICE "System Halted\n"); local_irq_disable(); @@ -217,7 +207,7 @@ void toshiba_rbtx4927_halt(void) /* no return */ } -void toshiba_rbtx4927_power_off(void) +static void toshiba_rbtx4927_power_off(void) { toshiba_rbtx4927_halt(); /* no return */ diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index 2ef71adea827..aaa987ae0f83 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include #include @@ -34,15 +33,9 @@ #include #include -extern char * __init prom_getcmdline(void); -/* These functions are used for rebooting or halting the machine*/ -extern void rbtx4938_machine_restart(char *command); -extern void rbtx4938_machine_halt(void); -extern void rbtx4938_machine_power_off(void); - static int tx4938_ccfg_toeon = 1; -void rbtx4938_machine_halt(void) +static void rbtx4938_machine_halt(void) { printk(KERN_NOTICE "System Halted\n"); local_irq_disable(); @@ -53,13 +46,13 @@ void rbtx4938_machine_halt(void) ".set\tmips0"); } -void rbtx4938_machine_power_off(void) +static void rbtx4938_machine_power_off(void) { rbtx4938_machine_halt(); /* no return */ } -void rbtx4938_machine_restart(char *command) +static void rbtx4938_machine_restart(char *command) { local_irq_disable(); diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h index 715d7c8ade5c..d8756660523d 100644 --- a/include/asm-mips/txx9/generic.h +++ b/include/asm-mips/txx9/generic.h @@ -36,5 +36,6 @@ struct txx9_board_vec { extern struct txx9_board_vec *txx9_board_vec; extern int (*txx9_irq_dispatch)(int pending); void prom_init_cmdline(void); +char *prom_getcmdline(void); #endif /* __ASM_TXX9_GENERIC_H */ -- cgit v1.2.3 From 9528356308ecd2fb6368472615996a8602c02964 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Fri, 11 Jul 2008 22:34:48 +0900 Subject: [MIPS] MTX-1 flash partition setup move to platform devices registration Signed-off-by: Yoichi Yuasa Acked-By: David Woodhouse Signed-off-by: Ralf Baechle --- arch/mips/au1000/mtx-1/platform.c | 51 ++++++++++++++++++++- drivers/mtd/maps/Kconfig | 7 --- drivers/mtd/maps/Makefile | 1 - drivers/mtd/maps/mtx-1_flash.c | 95 --------------------------------------- 4 files changed, 50 insertions(+), 104 deletions(-) delete mode 100644 drivers/mtd/maps/mtx-1_flash.c diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c index 9807be37c32f..8b5914d1241f 100644 --- a/arch/mips/au1000/mtx-1/platform.c +++ b/arch/mips/au1000/mtx-1/platform.c @@ -24,6 +24,9 @@ #include #include #include +#include +#include +#include static struct gpio_keys_button mtx1_gpio_button[] = { { @@ -85,10 +88,56 @@ static struct platform_device mtx1_gpio_leds = { } }; +static struct mtd_partition mtx1_mtd_partitions[] = { + { + .name = "filesystem", + .size = 0x01C00000, + .offset = 0, + }, + { + .name = "yamon", + .size = 0x00100000, + .offset = MTDPART_OFS_APPEND, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "kernel", + .size = 0x002c0000, + .offset = MTDPART_OFS_APPEND, + }, + { + .name = "yamon env", + .size = 0x00040000, + .offset = MTDPART_OFS_APPEND, + }, +}; + +static struct physmap_flash_data mtx1_flash_data = { + .width = 4, + .nr_parts = 4, + .parts = mtx1_mtd_partitions, +}; + +static struct resource mtx1_mtd_resource = { + .start = 0x1e000000, + .end = 0x1fffffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mtx1_mtd = { + .name = "physmap-flash", + .dev = { + .platform_data = &mtx1_flash_data, + }, + .num_resources = 1, + .resource = &mtx1_mtd_resource, +}; + static struct __initdata platform_device * mtx1_devs[] = { &mtx1_gpio_leds, &mtx1_wdt, - &mtx1_button + &mtx1_button, + &mtx1_mtd, }; static int __init mtx1_register_devices(void) diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 17bc87a43ff4..d2fbc2964523 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -258,13 +258,6 @@ config MTD_ALCHEMY help Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards -config MTD_MTX1 - tristate "4G Systems MTX-1 Flash device" - depends on MIPS_MTX1 && MTD_CFI - help - Flash memory access on 4G Systems MTX-1 Board. If you have one of - these boards and would like to use the flash chips on it, say 'Y'. - config MTD_DILNETPC tristate "CFI Flash device mapped on DIL/Net PC" depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 957fb5f70f5e..c6ce8673dab2 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -65,5 +65,4 @@ obj-$(CONFIG_MTD_DMV182) += dmv182.o obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o -obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o diff --git a/drivers/mtd/maps/mtx-1_flash.c b/drivers/mtd/maps/mtx-1_flash.c deleted file mode 100644 index 2a8fde9b92f0..000000000000 --- a/drivers/mtd/maps/mtx-1_flash.c +++ /dev/null @@ -1,95 +0,0 @@ -/* - * Flash memory access on 4G Systems MTX-1 boards - * - * $Id: mtx-1_flash.c,v 1.2 2005/11/07 11:14:27 gleixner Exp $ - * - * (C) 2005 Bruno Randolf - * (C) 2005 Joern Engel - * - */ - -#include -#include -#include -#include - -#include -#include -#include - -#include - -static struct map_info mtx1_map = { - .name = "MTX-1 flash", - .bankwidth = 4, - .size = 0x2000000, - .phys = 0x1E000000, -}; - -static struct mtd_partition mtx1_partitions[] = { - { - .name = "filesystem", - .size = 0x01C00000, - .offset = 0, - },{ - .name = "yamon", - .size = 0x00100000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE, - },{ - .name = "kernel", - .size = 0x002c0000, - .offset = MTDPART_OFS_APPEND, - },{ - .name = "yamon env", - .size = 0x00040000, - .offset = MTDPART_OFS_APPEND, - } -}; - -static struct mtd_info *mtx1_mtd; - -int __init mtx1_mtd_init(void) -{ - int ret = -ENXIO; - - simple_map_init(&mtx1_map); - - mtx1_map.virt = ioremap(mtx1_map.phys, mtx1_map.size); - if (!mtx1_map.virt) - return -EIO; - - mtx1_mtd = do_map_probe("cfi_probe", &mtx1_map); - if (!mtx1_mtd) - goto err; - - mtx1_mtd->owner = THIS_MODULE; - - ret = add_mtd_partitions(mtx1_mtd, mtx1_partitions, - ARRAY_SIZE(mtx1_partitions)); - if (ret) - goto err; - - return 0; - -err: - iounmap(mtx1_map.virt); - return ret; -} - -static void __exit mtx1_mtd_cleanup(void) -{ - if (mtx1_mtd) { - del_mtd_partitions(mtx1_mtd); - map_destroy(mtx1_mtd); - } - if (mtx1_map.virt) - iounmap(mtx1_map.virt); -} - -module_init(mtx1_mtd_init); -module_exit(mtx1_mtd_cleanup); - -MODULE_AUTHOR("Bruno Randolf "); -MODULE_DESCRIPTION("MTX-1 flash map"); -MODULE_LICENSE("GPL"); -- cgit v1.2.3 From c660729501894e0b88054ad4b66a5f98a1a2a37e Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 14 Jul 2008 15:11:40 +0200 Subject: [MIPS] Remove mips_machtype from ARC based machines This is the ARC part of the mips_machtype removal. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/fw/arc/identify.c | 11 ----------- arch/mips/jazz/setup.c | 3 +-- include/asm-mips/bootinfo.h | 21 --------------------- 3 files changed, 1 insertion(+), 34 deletions(-) diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c index 23066985a734..0ce9acf10c39 100644 --- a/arch/mips/fw/arc/identify.c +++ b/arch/mips/fw/arc/identify.c @@ -22,7 +22,6 @@ struct smatch { char *arcname; char *liname; - int type; int flags; }; @@ -30,47 +29,38 @@ static struct smatch mach_table[] = { { .arcname = "SGI-IP22", .liname = "SGI Indy", - .type = MACH_SGI_IP22, .flags = PROM_FLAG_ARCS, }, { .arcname = "SGI-IP27", .liname = "SGI Origin", - .type = MACH_SGI_IP27, .flags = PROM_FLAG_ARCS, }, { .arcname = "SGI-IP28", .liname = "SGI IP28", - .type = MACH_SGI_IP28, .flags = PROM_FLAG_ARCS, }, { .arcname = "SGI-IP30", .liname = "SGI Octane", - .type = MACH_SGI_IP30, .flags = PROM_FLAG_ARCS, }, { .arcname = "SGI-IP32", .liname = "SGI O2", - .type = MACH_SGI_IP32, .flags = PROM_FLAG_ARCS, }, { .arcname = "Microsoft-Jazz", .liname = "Jazz MIPS_Magnum_4000", - .type = MACH_MIPS_MAGNUM_4000, .flags = 0, }, { .arcname = "PICA-61", .liname = "Jazz Acer_PICA_61", - .type = MACH_ACER_PICA_61, .flags = 0, }, { .arcname = "RM200PCI", .liname = "SNI RM200_PCI", - .type = MACH_SNI_RM200_PCI, .flags = PROM_FLAG_DONT_FREE_TEMP, }, { .arcname = "RM200PCI-R5K", .liname = "SNI RM200_PCI-R5K", - .type = MACH_SNI_RM200_PCI, .flags = PROM_FLAG_DONT_FREE_TEMP, } }; @@ -121,6 +111,5 @@ void __init prom_identify_arch(void) mach = string_to_mach(iname); system_type = mach->liname; - mips_machtype = mach->type; prom_flags = mach->flags; } diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index f136c8a8591c..f60524e8bc44 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -76,8 +76,7 @@ void __init plat_mem_setup(void) set_io_port_base(JAZZ_PORT_BASE); #ifdef CONFIG_EISA - if (mips_machtype == MACH_MIPS_MAGNUM_4000) - EISA_bus = 1; + EISA_bus = 1; #endif /* request I/O space for devices used on all i[345]86 PCs */ diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index c70848d4f632..653096a69d16 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -25,13 +25,6 @@ */ #define MACH_UNKNOWN 0 /* whatever... */ -/* - * Valid machtype values for group JAZZ - */ -#define MACH_ACER_PICA_61 0 /* Acer PICA-61 (PICA1) */ -#define MACH_MIPS_MAGNUM_4000 1 /* Mips Magnum 4000 "RC4030" */ -#define MACH_OLIVETTI_M700 2 /* Olivetti M700-10 (-15 ??) */ - /* * Valid machtype for group DEC */ @@ -47,20 +40,6 @@ #define MACH_DS5800 9 /* DECsystem 5800 */ #define MACH_DS5900 10 /* DECsystem 5900 */ -/* - * Valid machtype for group SNI_RM - */ -#define MACH_SNI_RM200_PCI 0 /* RM200/RM300/RM400 PCI series */ - -/* - * Valid machtype for group SGI - */ -#define MACH_SGI_IP22 0 /* Indy, Indigo2, Challenge S */ -#define MACH_SGI_IP27 1 /* Origin 200, Origin 2000, Onyx 2 */ -#define MACH_SGI_IP28 2 /* Indigo2 Impact */ -#define MACH_SGI_IP32 3 /* O2 */ -#define MACH_SGI_IP30 4 /* Octane, Octane2 */ - /* * Valid machtype for group LASAT */ -- cgit v1.2.3 From 0b56fd8c7abbf85baeecb77be25c54d3c7d11587 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 14 Jul 2008 15:54:30 +0200 Subject: [MIPS] Remove mips_machtype from EMMA2RH machines This is the EMMA2RH part of the mips_machtype removal. [Ralf: Fixed to the #error statements] Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/emma2rh/common/prom.c | 15 +++++++-------- include/asm-mips/bootinfo.h | 5 ----- 2 files changed, 7 insertions(+), 13 deletions(-) diff --git a/arch/mips/emma2rh/common/prom.c b/arch/mips/emma2rh/common/prom.c index 0f791eb6bb66..5e92b3a9c5b8 100644 --- a/arch/mips/emma2rh/common/prom.c +++ b/arch/mips/emma2rh/common/prom.c @@ -34,12 +34,11 @@ const char *get_system_type(void) { - switch (mips_machtype) { - case MACH_NEC_MARKEINS: - return "NEC EMMA2RH Mark-eins"; - default: - return "Unknown NEC board"; - } +#if defined(CONFIG_MARKEINS) + return "NEC EMMA2RH Mark-eins"; +#else +#error Unknown NEC board +#endif } /* [jsun@junsun.net] PMON passes arguments in C main() style */ @@ -63,10 +62,10 @@ void __init prom_init(void) } #if defined(CONFIG_MARKEINS) - mips_machtype = MACH_NEC_MARKEINS; add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM); +#else +#error Unknown NEC board #endif - } void __init prom_free_prom_memory(void) diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index 653096a69d16..51dbec9dabfd 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -46,11 +46,6 @@ #define MACH_LASAT_100 0 /* Masquerade II/SP100/SP50/SP25 */ #define MACH_LASAT_200 1 /* Masquerade PRO/SP200 */ -/* - * Valid machtype for group NEC EMMA2RH - */ -#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ - /* * Valid machtype for group PMC-MSP */ -- cgit v1.2.3 From b27418aa551a153e8bf1bd16cf93e5786f9590a9 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 14 Jul 2008 16:58:47 +0200 Subject: [MIPS] Remove mips_machtype for LASAT machines This is the LASAT part of the mips_machtype removal. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle --- arch/mips/lasat/interrupt.c | 21 ++++++++------------- arch/mips/lasat/lasat_board.c | 3 +-- arch/mips/lasat/prom.c | 8 +++----- arch/mips/lasat/serial.c | 3 +-- arch/mips/lasat/setup.c | 8 +++++--- arch/mips/pci/pci-lasat.c | 14 ++++---------- include/asm-mips/bootinfo.h | 6 ------ include/asm-mips/lasat/lasat.h | 2 ++ 8 files changed, 24 insertions(+), 41 deletions(-) diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index a56c15026965..d1ac7a25c856 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -22,8 +22,8 @@ #include #include -#include #include +#include #include #include @@ -112,23 +112,18 @@ void __init arch_init_irq(void) { int i; - switch (mips_machtype) { - case MACH_LASAT_100: - lasat_int_status = (void *)LASAT_INT_STATUS_REG_100; - lasat_int_mask = (void *)LASAT_INT_MASK_REG_100; - lasat_int_mask_shift = LASATINT_MASK_SHIFT_100; - get_int_status = get_int_status_100; - *lasat_int_mask = 0; - break; - case MACH_LASAT_200: + if (IS_LASAT_200()) { lasat_int_status = (void *)LASAT_INT_STATUS_REG_200; lasat_int_mask = (void *)LASAT_INT_MASK_REG_200; lasat_int_mask_shift = LASATINT_MASK_SHIFT_200; get_int_status = get_int_status_200; *lasat_int_mask &= 0xffff; - break; - default: - panic("arch_init_irq: mips_machtype incorrect"); + } else { + lasat_int_status = (void *)LASAT_INT_STATUS_REG_100; + lasat_int_mask = (void *)LASAT_INT_MASK_REG_100; + lasat_int_mask_shift = LASATINT_MASK_SHIFT_100; + get_int_status = get_int_status_100; + *lasat_int_mask = 0; } mips_cpu_irq_init(); diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c index 31e328b3814d..577bb463a871 100644 --- a/arch/mips/lasat/lasat_board.c +++ b/arch/mips/lasat/lasat_board.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include "at93c.h" /* New model description table */ @@ -66,7 +65,7 @@ static void init_flash_sizes(void) ls[LASAT_MTD_SERVICE] = 0xC0000; ls[LASAT_MTD_NORMAL] = 0x100000; - if (mips_machtype == MACH_LASAT_100) { + if (!IS_LASAT_200()) { lasat_board_info.li_flash_base = 0x1e000000; lb[LASAT_MTD_BOOTLOADER] = 0x1e400000; diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c index 209edcc26f07..6acc6cb85f0a 100644 --- a/arch/mips/lasat/prom.c +++ b/arch/mips/lasat/prom.c @@ -86,18 +86,16 @@ void __init prom_init(void) setup_prom_vectors(); - if (current_cpu_data.cputype == CPU_R5000) { + if (IS_LASAT_200()) { printk(KERN_INFO "LASAT 200 board\n"); - mips_machtype = MACH_LASAT_200; lasat_ndelay_divider = LASAT_200_DIVIDER; + at93c = &at93c_defs[1]; } else { printk(KERN_INFO "LASAT 100 board\n"); - mips_machtype = MACH_LASAT_100; lasat_ndelay_divider = LASAT_100_DIVIDER; + at93c = &at93c_defs[0]; } - at93c = &at93c_defs[mips_machtype]; - lasat_init_board_info(); /* Read info from EEPROM */ /* Get the command line */ diff --git a/arch/mips/lasat/serial.c b/arch/mips/lasat/serial.c index 205bd397d75b..5bcb6e89ab78 100644 --- a/arch/mips/lasat/serial.c +++ b/arch/mips/lasat/serial.c @@ -23,7 +23,6 @@ #include #include -#include #include #include @@ -47,7 +46,7 @@ static __init int lasat_uart_add(void) if (!pdev) return -ENOMEM; - if (mips_machtype == MACH_LASAT_100) { + if (!IS_LASAT_200()) { lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_100); lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_100 * 8 - 1; lasat_serial_res[0].flags = IORESOURCE_MEM; diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c index e072da4ff3b3..dbd3163a85c2 100644 --- a/arch/mips/lasat/setup.c +++ b/arch/mips/lasat/setup.c @@ -127,9 +127,11 @@ void __init plat_time_init(void) void __init plat_mem_setup(void) { int i; - lasat_misc = &lasat_misc_info[mips_machtype]; + int lasat_type = IS_LASAT_200() ? 1 : 0; + + lasat_misc = &lasat_misc_info[lasat_type]; #ifdef CONFIG_PICVUE - picvue = &pvc_defs[mips_machtype]; + picvue = &pvc_defs[lasat_type]; #endif /* Set up panic notifier */ @@ -140,7 +142,7 @@ void __init plat_mem_setup(void) lasat_reboot_setup(); #ifdef CONFIG_DS1603 - ds1603 = &ds_defs[mips_machtype]; + ds1603 = &ds_defs[lasat_type]; #endif #ifdef DYNAMIC_SERIAL_INIT diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c index e70ae3236e0b..a98e543a514a 100644 --- a/arch/mips/pci/pci-lasat.c +++ b/arch/mips/pci/pci-lasat.c @@ -10,7 +10,7 @@ #include #include -#include +#include #include @@ -39,16 +39,10 @@ static int __init lasat_pci_setup(void) { printk(KERN_DEBUG "PCI: starting\n"); - switch (mips_machtype) { - case MACH_LASAT_100: - lasat_pci_controller.pci_ops = >64xxx_pci0_ops; - break; - case MACH_LASAT_200: + if (IS_LASAT_200()) lasat_pci_controller.pci_ops = &nile4_pci_ops; - break; - default: - panic("pcibios_init: mips_machtype incorrect"); - } + else + lasat_pci_controller.pci_ops = >64xxx_pci0_ops; register_pci_controller(&lasat_pci_controller); diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index 51dbec9dabfd..d39e143b4a3c 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -40,12 +40,6 @@ #define MACH_DS5800 9 /* DECsystem 5800 */ #define MACH_DS5900 10 /* DECsystem 5900 */ -/* - * Valid machtype for group LASAT - */ -#define MACH_LASAT_100 0 /* Masquerade II/SP100/SP50/SP25 */ -#define MACH_LASAT_200 1 /* Masquerade PRO/SP200 */ - /* * Valid machtype for group PMC-MSP */ diff --git a/include/asm-mips/lasat/lasat.h b/include/asm-mips/lasat/lasat.h index ea04d9262edc..caeba1e302a2 100644 --- a/include/asm-mips/lasat/lasat.h +++ b/include/asm-mips/lasat/lasat.h @@ -240,6 +240,8 @@ static inline void lasat_ndelay(unsigned int ns) __delay(ns / lasat_ndelay_divider); } +#define IS_LASAT_200() (current_cpu_data.cputype == CPU_R5000) + #endif /* !defined (_LANGUAGE_ASSEMBLY) */ #define LASAT_SERVICEMODE_MAGIC_1 0xdeadbeef -- cgit v1.2.3 From 14351760e314b8a9720804b11c6bd11d0c0b1258 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 15 Jul 2008 11:01:39 -0700 Subject: Fix printk format warning in clocksource/acpi_pm.c For real, this time. The earlier attempt just moved the warning around. Signed-off-by: Linus Torvalds --- drivers/clocksource/acpi_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index bcd7d0e429e8..5ca1d80de182 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -227,7 +227,7 @@ static int __init parse_pmtmr(char *arg) if (strict_strtoul(arg, 16, &base)) return -EINVAL; - printk(KERN_INFO "PMTMR IOPort override: 0x%04x -> 0x%04x\n", + printk(KERN_INFO "PMTMR IOPort override: 0x%04x -> 0x%04lx\n", (unsigned int)pmtmr_ioport, base); pmtmr_ioport = base; -- cgit v1.2.3 From 8c6e46ddb343004e33653f62f0b09c0721cd8c12 Mon Sep 17 00:00:00 2001 From: Mikhail Cherkashin Date: Tue, 15 Jul 2008 21:21:40 +0200 Subject: palm_bk3710: fix tRP for UDMA mode 4 Fix tRP timing for UDMA mode 4 according to the ATA specification. Signed-off-by: Mikhail Cherkashin Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/palm_bk3710.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 2f2b4f4cf229..74a05dc6d1e6 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -83,7 +83,7 @@ static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = { {125, 160}, /* UDMA Mode 1 */ {100, 120}, /* UDMA Mode 2 */ {100, 90}, /* UDMA Mode 3 */ - {85, 60}, /* UDMA Mode 4 */ + {100, 60}, /* UDMA Mode 4 */ }; static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, -- cgit v1.2.3 From 5ddee516dae1acc779b36cb7565720a80503196d Mon Sep 17 00:00:00 2001 From: Mikhail Cherkashin Date: Tue, 15 Jul 2008 21:21:40 +0200 Subject: ide: disable drive interrupts in ide_driveid_update() Since ide_driveid_update() uses polling to execute the IDENTIFY DEVICE command but clears nIEN bit in the control register and doesn't mask the IDE interrupt, the latter does happen and lead to the corresponding message to appear: ide0: unexpected interrupt, status=0x58, count=1 when e.g. running hdparm with option -X with a non-PCI IDE driver... Signed-off-by: Mikhail Cherkashin Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 0daf923541ff..c2dd20aa15a6 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -689,7 +689,7 @@ int ide_driveid_update(ide_drive_t *drive) */ SELECT_MASK(drive, 1); - ide_set_irq(drive, 1); + ide_set_irq(drive, 0); msleep(50); hwif->OUTBSYNC(drive, WIN_IDENTIFY, hwif->io_ports.command_addr); timeout = jiffies + WAIT_WORSTCASE; -- cgit v1.2.3 From d6cddd3cac6650f273a2595c9f403aacee01ab05 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Tue, 15 Jul 2008 21:21:41 +0200 Subject: ide: eliminate FIT() macro Replace the FIT() macro with the kernel-provided clamp_val() macro. FIT was always being called with a member of a struct ide_timing, which are shorts, and constant constraints for the min and max. Thus we can use clamp_val, rather than clamp_t. Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-timing.h | 1 - drivers/ide/pci/amd74xx.c | 14 +++++++------- drivers/ide/pci/via82cxxx.c | 14 +++++++------- 3 files changed, 14 insertions(+), 15 deletions(-) diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index 3b12ffe77071..2e91c5870b4c 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -95,7 +95,6 @@ static struct ide_timing ide_timing[] = { #define IDE_TIMING_UDMA 0x80 #define IDE_TIMING_ALL 0xff -#define FIT(v,vmin,vmax) max_t(short,min_t(short,v,vmax),vmin) #define ENOUGH(v,unit) (((v)-1)/(unit)+1) #define EZ(v,unit) ((v)?ENOUGH(v,unit):0) diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index efcf54338be7..a373101747b6 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -53,20 +53,20 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask, u8 t = 0, offset = amd_offset(dev); pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t); - t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); + t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t); pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)), - ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1)); + ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1)); pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn), - ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); + ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1)); switch (udma_mask) { - case ATA_UDMA2: t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; - case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break; - case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break; - case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break; + case ATA_UDMA2: t = timing->udma ? (0xc0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break; + case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 2, 10)]) : 0x03; break; + case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 10)]) : 0x03; break; + case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 15)]) : 0x03; break; default: return; } diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 566e0ecb8db1..e8c2570003ff 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -120,21 +120,21 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) if (~vdev->via_config->flags & VIA_BAD_AST) { pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); - t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); + t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t); } pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)), - ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1)); + ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1)); pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn), - ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1)); + ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1)); switch (vdev->via_config->udma_mask) { - case ATA_UDMA2: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break; - case ATA_UDMA4: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break; - case ATA_UDMA5: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; - case ATA_UDMA6: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break; + case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break; + case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break; + case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; + case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; default: return; } -- cgit v1.2.3 From a792bd5a407872714942f50bf24083874ce03745 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Tue, 15 Jul 2008 21:21:41 +0200 Subject: ide-tape: use clamp_t() rather than nested min_t()/max_t() Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1e1f26331a24..2d822df08658 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2746,9 +2746,8 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) * Ensure that the number we got makes sense; limit it within * IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX. */ - tape->best_dsc_rw_freq = max_t(unsigned long, - min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), - IDETAPE_DSC_RW_MIN); + tape->best_dsc_rw_freq = clamp_t(unsigned long, t, IDETAPE_DSC_RW_MIN, + IDETAPE_DSC_RW_MAX); printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, " "%lums tDSC%s\n", drive->name, tape->name, *(u16 *)&tape->caps[14], -- cgit v1.2.3 From 5d0cc8ae29b310ceb6516a6840ca22738aab7820 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Tue, 15 Jul 2008 21:21:41 +0200 Subject: ide: use get_unaligned_* helpers Signed-off-by: Harvey Harrison Cc: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2d822df08658..1a96cc503994 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -538,7 +538,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) if (pc->flags & PC_FLAG_DMA_ERROR) { pc->xferred = pc->req_xfer - tape->blk_size * - be32_to_cpu(get_unaligned((u32 *)&sense[3])); + get_unaligned_be32(&sense[3]); idetape_update_buffers(pc); } -- cgit v1.2.3 From e8a96aa71355edef9f40ce01459acf25c50cb78c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:41 +0200 Subject: ide: set REQ_PREEMPT request flag in ide_do_drive_cmd() users * Set REQ_PREEMPT request flag in ide_do_drive_cmd() users for ide_preempt and ide_head_wait action types. * Remove setting REQ_PREEMPT from ide_do_drive_cmd(). While at it: * Set 'where' variable outside ide_lock. This is a preparation for converting IDE to use blk_execute_rq(). There should be no functional changes caused by this patch. Cc: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 1 + drivers/ide/ide-floppy.c | 1 + drivers/ide/ide-io.c | 7 +++---- drivers/ide/ide-tape.c | 1 + drivers/ide/ide.c | 1 + drivers/scsi/ide-scsi.c | 1 + 6 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 68e7f19dc036..ff8815937d32 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -216,6 +216,7 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, rq->data_len = 18; rq->cmd_type = REQ_TYPE_SENSE; + rq->cmd_flags |= REQ_PREEMPT; /* NOTE! Save the failed command in "rq->buffer" */ rq->buffer = (void *) failed_command; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index f05fbc2bd7a8..7d75240c2e26 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -289,6 +289,7 @@ static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, ide_init_drive_cmd(rq); rq->buffer = (char *) pc; rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_flags |= REQ_PREEMPT; rq->rq_disk = floppy->disk; (void) ide_do_drive_cmd(drive, rq, ide_preempt); } diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 696525342e9a..5aed79ed4586 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1600,13 +1600,12 @@ int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t actio rq->end_io = blk_end_sync_rq; } + if (action == ide_preempt || action == ide_head_wait) + where = ELEVATOR_INSERT_FRONT; + spin_lock_irqsave(&ide_lock, flags); if (action == ide_preempt) hwgroup->rq = NULL; - if (action == ide_preempt || action == ide_head_wait) { - where = ELEVATOR_INSERT_FRONT; - rq->cmd_flags |= REQ_PREEMPT; - } __elv_add_request(drive->queue, rq, where, 0); ide_do_request(hwgroup, IDE_NO_IRQ); spin_unlock_irqrestore(&ide_lock, flags); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1a96cc503994..d67a17891786 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -688,6 +688,7 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, struct ide_tape_obj *tape = drive->driver_data; idetape_init_rq(rq, REQ_IDETAPE_PC1); + rq->cmd_flags |= REQ_PREEMPT; rq->buffer = (char *) pc; rq->rq_disk = tape->disk; (void) ide_do_drive_cmd(drive, rq, ide_preempt); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 300431d080a9..c9a05721360e 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -606,6 +606,7 @@ static int generic_ide_resume(struct device *dev) memset(&rqpm, 0, sizeof(rqpm)); memset(&args, 0, sizeof(args)); rq.cmd_type = REQ_TYPE_PM_RESUME; + rq.cmd_flags |= REQ_PREEMPT; rq.special = &args; rq.data = &rqpm; rqpm.pm_step = ide_pm_state_start_resume; diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 44d8d5163a1a..89ecf0132191 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -235,6 +235,7 @@ static int idescsi_check_condition(ide_drive_t *drive, pc->c[0] = REQUEST_SENSE; pc->c[4] = pc->req_xfer = pc->buf_size = SCSI_SENSE_BUFFERSIZE; rq->cmd_type = REQ_TYPE_SENSE; + rq->cmd_flags |= REQ_PREEMPT; pc->timeout = jiffies + WAIT_READY; /* NOTE! Save the failed packet command in "rq->buffer" */ rq->buffer = (void *) failed_cmd->special; -- cgit v1.2.3 From c6866a6ff571eebebda45bf14b5b62188768893a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:42 +0200 Subject: ide: use __generic_unplug_device() in ide_do_drive_cmd() (take 2) * Call __elv_add_request() with 'plug' == 1 (so the device will be plugged) and then use __generic_unplug_device() instead of calling ide_do_request() directly. v2: * For blk_pm_resume_request() requests the queue is stopped so we need to call ->request_fn explicitly. Thanks to: - Rafael for reporting/bisecting the bug - Borislav/Rafael for testing the fix This is a preparation for converting IDE to use blk_execute_rq(). Cc: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Cc: "Rafael J. Wysocki" Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 5aed79ed4586..1eb3f5cce556 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1606,8 +1606,11 @@ int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t actio spin_lock_irqsave(&ide_lock, flags); if (action == ide_preempt) hwgroup->rq = NULL; - __elv_add_request(drive->queue, rq, where, 0); - ide_do_request(hwgroup, IDE_NO_IRQ); + __elv_add_request(drive->queue, rq, where, 1); + __generic_unplug_device(drive->queue); + /* the queue is stopped so it won't be plugged+unplugged */ + if (blk_pm_resume_request(rq)) + do_ide_request(drive->queue); spin_unlock_irqrestore(&ide_lock, flags); err = 0; -- cgit v1.2.3 From 5f828546e1acb45678e73d3a9a796c1a3a8c7846 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:42 +0200 Subject: ide-cd: convert ide_cd_queue_pc to use blk_execute_rq This converts ide_cd_queue_pc to use blk_execute_rq, necessitating changing the ide_cd_queue_pc prototype into a form that doesn't takes a pointer to request struct. ide_cd_queue_pc works like scsi_execute. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 96 +++++++++++++++++++++++------------------- drivers/ide/ide-cd.h | 3 +- drivers/ide/ide-cd_ioctl.c | 101 +++++++++++++++++++++------------------------ 3 files changed, 103 insertions(+), 97 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index ff8815937d32..792a3cf73d6e 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -839,34 +839,54 @@ static void ide_cd_request_sense_fixup(struct request *rq) } } -int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq) +int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd, + int write, void *buffer, unsigned *bufflen, + struct request_sense *sense, int timeout, + unsigned int cmd_flags) { - struct request_sense sense; + struct cdrom_info *info = drive->driver_data; + struct request_sense local_sense; int retries = 10; - unsigned int flags = rq->cmd_flags; + unsigned int flags = 0; - if (rq->sense == NULL) - rq->sense = &sense; + if (!sense) + sense = &local_sense; /* start of retry loop */ do { + struct request *rq; int error; - unsigned long time = jiffies; - rq->cmd_flags = flags; - error = ide_do_drive_cmd(drive, rq, ide_wait); - time = jiffies - time; + rq = blk_get_request(drive->queue, write, __GFP_WAIT); + + memcpy(rq->cmd, cmd, BLK_MAX_CDB); + rq->cmd_type = REQ_TYPE_ATA_PC; + rq->sense = sense; + rq->cmd_flags |= cmd_flags; + rq->timeout = timeout; + if (buffer) { + rq->data = buffer; + rq->data_len = *bufflen; + } + + error = blk_execute_rq(drive->queue, info->disk, rq, 0); + + if (buffer) + *bufflen = rq->data_len; + + flags = rq->cmd_flags; + blk_put_request(rq); /* * FIXME: we should probably abort/retry or something in case of * failure. */ - if (rq->cmd_flags & REQ_FAILED) { + if (flags & REQ_FAILED) { /* * The request failed. Retry if it was due to a unit * attention status (usually means media was changed). */ - struct request_sense *reqbuf = rq->sense; + struct request_sense *reqbuf = sense; if (reqbuf->sense_key == UNIT_ATTENTION) cdrom_saw_media_change(drive); @@ -886,10 +906,10 @@ int ide_cd_queue_pc(ide_drive_t *drive, struct request *rq) } /* end of retry loop */ - } while ((rq->cmd_flags & REQ_FAILED) && retries >= 0); + } while ((flags & REQ_FAILED) && retries >= 0); /* return an error if the command failed */ - return (rq->cmd_flags & REQ_FAILED) ? -EIO : 0; + return (flags & REQ_FAILED) ? -EIO : 0; } /* @@ -1269,23 +1289,20 @@ static void msf_from_bcd(struct atapi_msf *msf) int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense) { - struct request req; struct cdrom_info *info = drive->driver_data; struct cdrom_device_info *cdi = &info->devinfo; + unsigned char cmd[BLK_MAX_CDB]; - ide_cd_init_rq(drive, &req); - - req.sense = sense; - req.cmd[0] = GPCMD_TEST_UNIT_READY; - req.cmd_flags |= REQ_QUIET; + memset(cmd, 0, BLK_MAX_CDB); + cmd[0] = GPCMD_TEST_UNIT_READY; /* * Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to switch CDs * instead of supporting the LOAD_UNLOAD opcode. */ - req.cmd[7] = cdi->sanyo_slot % 3; + cmd[7] = cdi->sanyo_slot % 3; - return ide_cd_queue_pc(drive, &req); + return ide_cd_queue_pc(drive, cmd, 0, NULL, 0, sense, 0, REQ_QUIET); } static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, @@ -1298,17 +1315,14 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity, } capbuf; int stat; - struct request req; - - ide_cd_init_rq(drive, &req); + unsigned char cmd[BLK_MAX_CDB]; + unsigned len = sizeof(capbuf); - req.sense = sense; - req.cmd[0] = GPCMD_READ_CDVD_CAPACITY; - req.data = (char *)&capbuf; - req.data_len = sizeof(capbuf); - req.cmd_flags |= REQ_QUIET; + memset(cmd, 0, BLK_MAX_CDB); + cmd[0] = GPCMD_READ_CDVD_CAPACITY; - stat = ide_cd_queue_pc(drive, &req); + stat = ide_cd_queue_pc(drive, cmd, 0, &capbuf, &len, sense, 0, + REQ_QUIET); if (stat == 0) { *capacity = 1 + be32_to_cpu(capbuf.lba); *sectors_per_frame = @@ -1322,24 +1336,20 @@ static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag, int format, char *buf, int buflen, struct request_sense *sense) { - struct request req; + unsigned char cmd[BLK_MAX_CDB]; - ide_cd_init_rq(drive, &req); + memset(cmd, 0, BLK_MAX_CDB); - req.sense = sense; - req.data = buf; - req.data_len = buflen; - req.cmd_flags |= REQ_QUIET; - req.cmd[0] = GPCMD_READ_TOC_PMA_ATIP; - req.cmd[6] = trackno; - req.cmd[7] = (buflen >> 8); - req.cmd[8] = (buflen & 0xff); - req.cmd[9] = (format << 6); + cmd[0] = GPCMD_READ_TOC_PMA_ATIP; + cmd[6] = trackno; + cmd[7] = (buflen >> 8); + cmd[8] = (buflen & 0xff); + cmd[9] = (format << 6); if (msf_flag) - req.cmd[1] = 2; + cmd[1] = 2; - return ide_cd_queue_pc(drive, &req); + return ide_cd_queue_pc(drive, cmd, 0, buf, &buflen, sense, 0, REQ_QUIET); } /* Try to read the entire TOC for the disk into our internal buffer. */ diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index a58801c4484d..df01cfd797cf 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -144,7 +144,8 @@ void ide_cd_log_error(const char *, struct request *, struct request_sense *); /* ide-cd.c functions used by ide-cd_ioctl.c */ void ide_cd_init_rq(ide_drive_t *, struct request *); -int ide_cd_queue_pc(ide_drive_t *, struct request *); +int ide_cd_queue_pc(ide_drive_t *, const unsigned char *, int, void *, + unsigned *, struct request_sense *, int, unsigned int); int ide_cd_read_toc(ide_drive_t *, struct request_sense *); int ide_cdrom_get_capabilities(ide_drive_t *, u8 *); void ide_cdrom_update_speed(ide_drive_t *, u8 *); diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c index 6d147ce6782f..851277074302 100644 --- a/drivers/ide/ide-cd_ioctl.c +++ b/drivers/ide/ide-cd_ioctl.c @@ -104,8 +104,8 @@ int cdrom_eject(ide_drive_t *drive, int ejectflag, { struct cdrom_info *cd = drive->driver_data; struct cdrom_device_info *cdi = &cd->devinfo; - struct request req; char loej = 0x02; + unsigned char cmd[BLK_MAX_CDB]; if ((cd->cd_flags & IDE_CD_FLAG_NO_EJECT) && !ejectflag) return -EDRIVE_CANT_DO_THIS; @@ -114,17 +114,16 @@ int cdrom_eject(ide_drive_t *drive, int ejectflag, if ((cd->cd_flags & IDE_CD_FLAG_DOOR_LOCKED) && ejectflag) return 0; - ide_cd_init_rq(drive, &req); - /* only tell drive to close tray if open, if it can do that */ if (ejectflag && (cdi->mask & CDC_CLOSE_TRAY)) loej = 0; - req.sense = sense; - req.cmd[0] = GPCMD_START_STOP_UNIT; - req.cmd[4] = loej | (ejectflag != 0); + memset(cmd, 0, BLK_MAX_CDB); + + cmd[0] = GPCMD_START_STOP_UNIT; + cmd[4] = loej | (ejectflag != 0); - return ide_cd_queue_pc(drive, &req); + return ide_cd_queue_pc(drive, cmd, 0, NULL, 0, sense, 0, 0); } /* Lock the door if LOCKFLAG is nonzero; unlock it otherwise. */ @@ -134,7 +133,6 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag, { struct cdrom_info *cd = drive->driver_data; struct request_sense my_sense; - struct request req; int stat; if (sense == NULL) @@ -144,11 +142,15 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag, if (cd->cd_flags & IDE_CD_FLAG_NO_DOORLOCK) { stat = 0; } else { - ide_cd_init_rq(drive, &req); - req.sense = sense; - req.cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL; - req.cmd[4] = lockflag ? 1 : 0; - stat = ide_cd_queue_pc(drive, &req); + unsigned char cmd[BLK_MAX_CDB]; + + memset(cmd, 0, BLK_MAX_CDB); + + cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL; + cmd[4] = lockflag ? 1 : 0; + + stat = ide_cd_queue_pc(drive, cmd, 0, NULL, 0, + sense, 0, 0); } /* If we got an illegal field error, the drive @@ -206,32 +208,30 @@ int ide_cdrom_select_speed(struct cdrom_device_info *cdi, int speed) { ide_drive_t *drive = cdi->handle; struct cdrom_info *cd = drive->driver_data; - struct request rq; struct request_sense sense; u8 buf[ATAPI_CAPABILITIES_PAGE_SIZE]; int stat; - - ide_cd_init_rq(drive, &rq); - - rq.sense = &sense; + unsigned char cmd[BLK_MAX_CDB]; if (speed == 0) speed = 0xffff; /* set to max */ else speed *= 177; /* Nx to kbytes/s */ - rq.cmd[0] = GPCMD_SET_SPEED; + memset(cmd, 0, BLK_MAX_CDB); + + cmd[0] = GPCMD_SET_SPEED; /* Read Drive speed in kbytes/second MSB/LSB */ - rq.cmd[2] = (speed >> 8) & 0xff; - rq.cmd[3] = speed & 0xff; + cmd[2] = (speed >> 8) & 0xff; + cmd[3] = speed & 0xff; if ((cdi->mask & (CDC_CD_R | CDC_CD_RW | CDC_DVD_R)) != (CDC_CD_R | CDC_CD_RW | CDC_DVD_R)) { /* Write Drive speed in kbytes/second MSB/LSB */ - rq.cmd[4] = (speed >> 8) & 0xff; - rq.cmd[5] = speed & 0xff; + cmd[4] = (speed >> 8) & 0xff; + cmd[5] = speed & 0xff; } - stat = ide_cd_queue_pc(drive, &rq); + stat = ide_cd_queue_pc(drive, cmd, 0, NULL, 0, &sense, 0, 0); if (!ide_cdrom_get_capabilities(drive, buf)) { ide_cdrom_update_speed(drive, buf); @@ -268,21 +268,19 @@ int ide_cdrom_get_mcn(struct cdrom_device_info *cdi, { ide_drive_t *drive = cdi->handle; int stat, mcnlen; - struct request rq; char buf[24]; + unsigned char cmd[BLK_MAX_CDB]; + unsigned len = sizeof(buf); - ide_cd_init_rq(drive, &rq); + memset(cmd, 0, BLK_MAX_CDB); - rq.data = buf; - rq.data_len = sizeof(buf); + cmd[0] = GPCMD_READ_SUBCHANNEL; + cmd[1] = 2; /* MSF addressing */ + cmd[2] = 0x40; /* request subQ data */ + cmd[3] = 2; /* format */ + cmd[8] = len; - rq.cmd[0] = GPCMD_READ_SUBCHANNEL; - rq.cmd[1] = 2; /* MSF addressing */ - rq.cmd[2] = 0x40; /* request subQ data */ - rq.cmd[3] = 2; /* format */ - rq.cmd[8] = sizeof(buf); - - stat = ide_cd_queue_pc(drive, &rq); + stat = ide_cd_queue_pc(drive, cmd, 0, buf, &len, NULL, 0, 0); if (stat) return stat; @@ -351,8 +349,8 @@ static int ide_cd_fake_play_trkind(ide_drive_t *drive, void *arg) struct atapi_toc_entry *first_toc, *last_toc; unsigned long lba_start, lba_end; int stat; - struct request rq; struct request_sense sense; + unsigned char cmd[BLK_MAX_CDB]; stat = ide_cd_get_toc_entry(drive, ti->cdti_trk0, &first_toc); if (stat) @@ -370,14 +368,13 @@ static int ide_cd_fake_play_trkind(ide_drive_t *drive, void *arg) if (lba_end <= lba_start) return -EINVAL; - ide_cd_init_rq(drive, &rq); + memset(cmd, 0, BLK_MAX_CDB); - rq.sense = &sense; - rq.cmd[0] = GPCMD_PLAY_AUDIO_MSF; - lba_to_msf(lba_start, &rq.cmd[3], &rq.cmd[4], &rq.cmd[5]); - lba_to_msf(lba_end - 1, &rq.cmd[6], &rq.cmd[7], &rq.cmd[8]); + cmd[0] = GPCMD_PLAY_AUDIO_MSF; + lba_to_msf(lba_start, &cmd[3], &cmd[4], &cmd[5]); + lba_to_msf(lba_end - 1, &cmd[6], &cmd[7], &cmd[8]); - return ide_cd_queue_pc(drive, &rq); + return ide_cd_queue_pc(drive, cmd, 0, NULL, 0, &sense, 0, 0); } static int ide_cd_read_tochdr(ide_drive_t *drive, void *arg) @@ -447,8 +444,9 @@ int ide_cdrom_audio_ioctl(struct cdrom_device_info *cdi, int ide_cdrom_packet(struct cdrom_device_info *cdi, struct packet_command *cgc) { - struct request req; ide_drive_t *drive = cdi->handle; + unsigned int flags = 0; + unsigned len = cgc->buflen; if (cgc->timeout <= 0) cgc->timeout = ATAPI_WAIT_PC; @@ -456,24 +454,21 @@ int ide_cdrom_packet(struct cdrom_device_info *cdi, /* here we queue the commands from the uniform CD-ROM layer. the packet must be complete, as we do not touch it at all. */ - ide_cd_init_rq(drive, &req); if (cgc->data_direction == CGC_DATA_WRITE) - req.cmd_flags |= REQ_RW; + flags |= REQ_RW; - memcpy(req.cmd, cgc->cmd, CDROM_PACKET_SIZE); if (cgc->sense) memset(cgc->sense, 0, sizeof(struct request_sense)); - req.data = cgc->buffer; - req.data_len = cgc->buflen; - req.timeout = cgc->timeout; if (cgc->quiet) - req.cmd_flags |= REQ_QUIET; + flags |= REQ_QUIET; - req.sense = cgc->sense; - cgc->stat = ide_cd_queue_pc(drive, &req); + cgc->stat = ide_cd_queue_pc(drive, cgc->cmd, + cgc->data_direction == CGC_DATA_WRITE, + cgc->buffer, &len, + cgc->sense, cgc->timeout, flags); if (!cgc->stat) - cgc->buflen -= req.data_len; + cgc->buflen -= len; return cgc->stat; } -- cgit v1.2.3 From 0ef4c4db7faabe4fb8a516e9e991e1e8e87a647f Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:42 +0200 Subject: ide-cd: convert ide_do_drive_cmd path to use blk_execute_rq This converts the ide_do_drive_cmd path using ide_wait to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd_ioctl.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/ide/ide-cd_ioctl.c b/drivers/ide/ide-cd_ioctl.c index 851277074302..24d002addf73 100644 --- a/drivers/ide/ide-cd_ioctl.c +++ b/drivers/ide/ide-cd_ioctl.c @@ -296,14 +296,14 @@ int ide_cdrom_reset(struct cdrom_device_info *cdi) ide_drive_t *drive = cdi->handle; struct cdrom_info *cd = drive->driver_data; struct request_sense sense; - struct request req; + struct request *rq; int ret; - ide_cd_init_rq(drive, &req); - req.cmd_type = REQ_TYPE_SPECIAL; - req.cmd_flags = REQ_QUIET; - ret = ide_do_drive_cmd(drive, &req, ide_wait); - + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_flags = REQ_QUIET; + ret = blk_execute_rq(drive->queue, cd->disk, rq, 0); + blk_put_request(rq); /* * A reset will unlock the door. If it was previously locked, * lock it again. -- cgit v1.2.3 From dd47087bc173a84e8c42644b315d38b30dc02263 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:43 +0200 Subject: ide-disk: convert ide_do_drive_cmd path to use blk_execute_rq This converts the ide_do_drive_cmd path using ide_wait to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 8e08d083fce9..c5f22ef8ed24 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -617,7 +617,8 @@ static void idedisk_prepare_flush(struct request_queue *q, struct request *rq) */ static int set_multcount(ide_drive_t *drive, int arg) { - struct request rq; + struct request *rq; + int error; if (arg < 0 || arg > drive->id->max_multsect) return -EINVAL; @@ -625,12 +626,13 @@ static int set_multcount(ide_drive_t *drive, int arg) if (drive->special.b.set_multmode) return -EBUSY; - ide_init_drive_cmd(&rq); - rq.cmd_type = REQ_TYPE_ATA_TASKFILE; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_ATA_TASKFILE; drive->mult_req = arg; drive->special.b.set_multmode = 1; - (void)ide_do_drive_cmd(drive, &rq, ide_wait); + error = blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); return (drive->mult_count == arg) ? 0 : -EIO; } -- cgit v1.2.3 From 6fe162381e547f457252e68521eb42fd36ec1418 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:43 +0200 Subject: ide-floppy: convert ide_do_drive_cmd path to use blk_execute_rq This converts the ide_do_drive_cmd path using ide_wait to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 7d75240c2e26..b10e9a813cde 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -887,14 +887,16 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, static int idefloppy_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct ide_floppy_obj *floppy = drive->driver_data; - struct request rq; + struct request *rq; + int error; - ide_init_drive_cmd(&rq); - rq.buffer = (char *) pc; - rq.cmd_type = REQ_TYPE_SPECIAL; - rq.rq_disk = floppy->disk; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->buffer = (char *) pc; + rq->cmd_type = REQ_TYPE_SPECIAL; + error = blk_execute_rq(drive->queue, floppy->disk, rq, 0); + blk_put_request(rq); - return ide_do_drive_cmd(drive, &rq, ide_wait); + return error; } /* -- cgit v1.2.3 From 154ed280e3f48995d0689b57f10b7063add63019 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:43 +0200 Subject: ide-taskfile: convert ide_do_drive_cmd path to use blk_execute_rq This converts the ide_do_drive_cmd path using ide_wait to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-taskfile.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index ab545ffa1549..b6a1c4b51129 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -492,11 +492,12 @@ static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq) int ide_raw_taskfile(ide_drive_t *drive, ide_task_t *task, u8 *buf, u16 nsect) { - struct request rq; + struct request *rq; + int error; - blk_rq_init(NULL, &rq); - rq.cmd_type = REQ_TYPE_ATA_TASKFILE; - rq.buffer = buf; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_ATA_TASKFILE; + rq->buffer = buf; /* * (ks) We transfer currently only whole sectors. @@ -504,16 +505,19 @@ int ide_raw_taskfile(ide_drive_t *drive, ide_task_t *task, u8 *buf, u16 nsect) * if we would find a solution to transfer any size. * To support special commands like READ LONG. */ - rq.hard_nr_sectors = rq.nr_sectors = nsect; - rq.hard_cur_sectors = rq.current_nr_sectors = nsect; + rq->hard_nr_sectors = rq->nr_sectors = nsect; + rq->hard_cur_sectors = rq->current_nr_sectors = nsect; if (task->tf_flags & IDE_TFLAG_WRITE) - rq.cmd_flags |= REQ_RW; + rq->cmd_flags |= REQ_RW; - rq.special = task; - task->rq = &rq; + rq->special = task; + task->rq = rq; - return ide_do_drive_cmd(drive, &rq, ide_wait); + error = blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); + + return error; } EXPORT_SYMBOL(ide_raw_taskfile); @@ -739,12 +743,14 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) struct hd_driveid *id = drive->id; if (NULL == (void *) arg) { - struct request rq; + struct request *rq; - ide_init_drive_cmd(&rq); - rq.cmd_type = REQ_TYPE_ATA_TASKFILE; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_ATA_TASKFILE; + err = blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); - return ide_do_drive_cmd(drive, &rq, ide_wait); + return err; } if (copy_from_user(args, (void __user *)arg, 4)) -- cgit v1.2.3 From 64ea1b4ab7f51c5de601d291a51508c27d445f70 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:43 +0200 Subject: ide-tape: convert ide_do_drive_cmd path to use blk_execute_rq This converts the ide_do_drive_cmd path using ide_wait to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 41 ++++++++++++++++++++++++++--------------- 1 file changed, 26 insertions(+), 15 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d67a17891786..a5f0b774527b 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1519,12 +1519,16 @@ static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc) static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct ide_tape_obj *tape = drive->driver_data; - struct request rq; + struct request *rq; + int error; - idetape_init_rq(&rq, REQ_IDETAPE_PC1); - rq.buffer = (char *) pc; - rq.rq_disk = tape->disk; - return ide_do_drive_cmd(drive, &rq, ide_wait); + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd[0] = REQ_IDETAPE_PC1; + rq->buffer = (char *)pc; + error = blk_execute_rq(drive->queue, tape->disk, rq, 0); + blk_put_request(rq); + return error; } static void idetape_create_load_unload_cmd(ide_drive_t *drive, @@ -1701,26 +1705,33 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh) { idetape_tape_t *tape = drive->driver_data; - struct request rq; + struct request *rq; + int ret, errors; debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); - idetape_init_rq(&rq, cmd); - rq.rq_disk = tape->disk; - rq.special = (void *)bh; - rq.sector = tape->first_frame; - rq.nr_sectors = blocks; - rq.current_nr_sectors = blocks; - (void) ide_do_drive_cmd(drive, &rq, ide_wait); + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd[0] = cmd; + rq->rq_disk = tape->disk; + rq->special = (void *)bh; + rq->sector = tape->first_frame; + rq->nr_sectors = blocks; + rq->current_nr_sectors = blocks; + blk_execute_rq(drive->queue, tape->disk, rq, 0); + + errors = rq->errors; + ret = tape->blk_size * (blocks - rq->current_nr_sectors); + blk_put_request(rq); if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0) return 0; if (tape->merge_bh) idetape_init_merge_buffer(tape); - if (rq.errors == IDETAPE_ERROR_GENERAL) + if (errors == IDETAPE_ERROR_GENERAL) return -EIO; - return (tape->blk_size * (blocks-rq.current_nr_sectors)); + return ret; } static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc) -- cgit v1.2.3 From 9a2d43b7566caeeeb414aa628bc2759028897dbb Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:43 +0200 Subject: block: handle blk_pm_resume_request() requests in blk_execute_rq_nowait() For blk_pm_resume_request() requests (which are used only by IDE subsystem currently) the queue is stopped so we need to call ->request_fn explicitly. Thanks to: - Rafael for reporting/bisecting the bug - Borislav/Rafael for testing the fix This is a preparation for converting IDE to use blk_execute_rq(). Cc: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Cc: "Rafael J. Wysocki" Signed-off-by: Bartlomiej Zolnierkiewicz --- block/blk-exec.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/block/blk-exec.c b/block/blk-exec.c index 391dd6224890..4f52f2792059 100644 --- a/block/blk-exec.c +++ b/block/blk-exec.c @@ -58,6 +58,9 @@ void blk_execute_rq_nowait(struct request_queue *q, struct gendisk *bd_disk, spin_lock_irq(q->queue_lock); __elv_add_request(q, rq, where, 1); __generic_unplug_device(q); + /* the queue is stopped so it won't be plugged+unplugged */ + if (blk_pm_resume_request(rq)) + q->request_fn(q); spin_unlock_irq(q->queue_lock); } EXPORT_SYMBOL_GPL(blk_execute_rq_nowait); -- cgit v1.2.3 From 5b114715ed63f3a4fdf790f5df61364fc4adadf1 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:44 +0200 Subject: ide: convert ide_do_drive_cmd path to use blk_execute_rq This converts the ide_do_drive_cmd path using ide_[head_]wait to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 39 ++++++++++++++++++++++----------------- 1 file changed, 22 insertions(+), 17 deletions(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index c9a05721360e..8823df1b8716 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -498,7 +498,7 @@ out: int set_pio_mode(ide_drive_t *drive, int arg) { - struct request rq; + struct request *rq; ide_hwif_t *hwif = drive->hwif; const struct ide_port_ops *port_ops = hwif->port_ops; @@ -512,12 +512,15 @@ int set_pio_mode(ide_drive_t *drive, int arg) if (drive->special.b.set_tune) return -EBUSY; - ide_init_drive_cmd(&rq); - rq.cmd_type = REQ_TYPE_ATA_TASKFILE; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_ATA_TASKFILE; drive->tune_req = (u8) arg; drive->special.b.set_tune = 1; - (void) ide_do_drive_cmd(drive, &rq, ide_wait); + + blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); + return 0; } @@ -555,7 +558,7 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg) { ide_drive_t *drive = dev->driver_data; ide_hwif_t *hwif = HWIF(drive); - struct request rq; + struct request *rq; struct request_pm_state rqpm; ide_task_t args; int ret; @@ -564,18 +567,19 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg) if (!(drive->dn % 2)) ide_acpi_get_timing(hwif); - blk_rq_init(NULL, &rq); memset(&rqpm, 0, sizeof(rqpm)); memset(&args, 0, sizeof(args)); - rq.cmd_type = REQ_TYPE_PM_SUSPEND; - rq.special = &args; - rq.data = &rqpm; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_PM_SUSPEND; + rq->special = &args; + rq->data = &rqpm; rqpm.pm_step = ide_pm_state_start_suspend; if (mesg.event == PM_EVENT_PRETHAW) mesg.event = PM_EVENT_FREEZE; rqpm.pm_state = mesg.event; - ret = ide_do_drive_cmd(drive, &rq, ide_wait); + ret = blk_execute_rq(drive->queue, NULL, rq, 0); + blk_put_request(rq); /* only call ACPI _PS3 after both drivers are suspended */ if (!ret && (((drive->dn % 2) && hwif->drives[0].present && hwif->drives[1].present) @@ -589,7 +593,7 @@ static int generic_ide_resume(struct device *dev) { ide_drive_t *drive = dev->driver_data; ide_hwif_t *hwif = HWIF(drive); - struct request rq; + struct request *rq; struct request_pm_state rqpm; ide_task_t args; int err; @@ -602,17 +606,18 @@ static int generic_ide_resume(struct device *dev) ide_acpi_exec_tfs(drive); - blk_rq_init(NULL, &rq); memset(&rqpm, 0, sizeof(rqpm)); memset(&args, 0, sizeof(args)); - rq.cmd_type = REQ_TYPE_PM_RESUME; - rq.cmd_flags |= REQ_PREEMPT; - rq.special = &args; - rq.data = &rqpm; + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_PM_RESUME; + rq->cmd_flags |= REQ_PREEMPT; + rq->special = &args; + rq->data = &rqpm; rqpm.pm_step = ide_pm_state_start_resume; rqpm.pm_state = PM_EVENT_ON; - err = ide_do_drive_cmd(drive, &rq, ide_head_wait); + err = blk_execute_rq(drive->queue, NULL, rq, 1); + blk_put_request(rq); if (err == 0 && dev->driver) { ide_driver_t *drv = to_ide_driver(dev->driver); -- cgit v1.2.3 From 5f2e1ceef45ac07d7c52d16de2531a56c453bb0f Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:44 +0200 Subject: ide: remove ide_wait/head_wait path in ide_do_drive_cmd Now all the users of ide_do_drive_cmd using ide_wait/head_wait are converted to use blk_execute_rq this removes the ide_wait/head_wait path in ide_do_drive_cmd. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 27 +++------------------------ 1 file changed, 3 insertions(+), 24 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 1eb3f5cce556..29f5cc863f6e 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1584,23 +1584,11 @@ int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t actio { unsigned long flags; ide_hwgroup_t *hwgroup = HWGROUP(drive); - DECLARE_COMPLETION_ONSTACK(wait); - int where = ELEVATOR_INSERT_BACK, err; - int must_wait = (action == ide_wait || action == ide_head_wait); + int where = ELEVATOR_INSERT_BACK; rq->errors = 0; - /* - * we need to hold an extra reference to request for safe inspection - * after completion - */ - if (must_wait) { - rq->ref_count++; - rq->end_io_data = &wait; - rq->end_io = blk_end_sync_rq; - } - - if (action == ide_preempt || action == ide_head_wait) + if (action == ide_preempt) where = ELEVATOR_INSERT_FRONT; spin_lock_irqsave(&ide_lock, flags); @@ -1613,16 +1601,7 @@ int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t actio do_ide_request(drive->queue); spin_unlock_irqrestore(&ide_lock, flags); - err = 0; - if (must_wait) { - wait_for_completion(&wait); - if (rq->errors) - err = -EIO; - - blk_put_request(rq); - } - - return err; + return 0; } EXPORT_SYMBOL(ide_do_drive_cmd); -- cgit v1.2.3 From 124cafc5eb973e748c4ce3dc1caad29274e64613 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:44 +0200 Subject: ide: remove ide_init_drive_cmd ide_init_drive_cmd just calls blk_rq_init. This converts the users of ide_init_drive_cmd to use blk_rq_init directly and removes ide_init_drive_cmd. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 2 +- drivers/ide/ide-floppy.c | 2 +- drivers/ide/ide-io.c | 17 ----------------- drivers/scsi/ide-scsi.c | 4 ++-- include/linux/ide.h | 2 -- 5 files changed, 4 insertions(+), 23 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 792a3cf73d6e..7917cd576446 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -193,7 +193,7 @@ void ide_cd_init_rq(ide_drive_t *drive, struct request *rq) { struct cdrom_info *cd = drive->driver_data; - ide_init_drive_cmd(rq); + blk_rq_init(NULL, rq); rq->cmd_type = REQ_TYPE_ATA_PC; rq->rq_disk = cd->disk; } diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index b10e9a813cde..9161cd92a842 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -286,7 +286,7 @@ static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, { struct ide_floppy_obj *floppy = drive->driver_data; - ide_init_drive_cmd(rq); + blk_rq_init(NULL, rq); rq->buffer = (char *) pc; rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_flags |= REQ_PREEMPT; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 29f5cc863f6e..d8b4d9f81ae2 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1538,23 +1538,6 @@ irqreturn_t ide_intr (int irq, void *dev_id) return IRQ_HANDLED; } -/** - * ide_init_drive_cmd - initialize a drive command request - * @rq: request object - * - * Initialize a request before we fill it in and send it down to - * ide_do_drive_cmd. Commands must be set up by this function. Right - * now it doesn't do a lot, but if that changes abusers will have a - * nasty surprise. - */ - -void ide_init_drive_cmd (struct request *rq) -{ - blk_rq_init(NULL, rq); -} - -EXPORT_SYMBOL(ide_init_drive_cmd); - /** * ide_do_drive_cmd - issue IDE special command * @drive: device to issue command diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 89ecf0132191..da261806d62a 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -228,7 +228,7 @@ static int idescsi_check_condition(ide_drive_t *drive, kfree(pc); return -ENOMEM; } - ide_init_drive_cmd(rq); + blk_rq_init(NULL, rq); rq->special = (char *) pc; pc->rq = rq; pc->buf = buf; @@ -786,7 +786,7 @@ static int idescsi_queue (struct scsi_cmnd *cmd, } } - ide_init_drive_cmd (rq); + blk_rq_init(NULL, rq); rq->special = (char *) pc; rq->cmd_type = REQ_TYPE_SPECIAL; spin_unlock_irq(host->host_lock); diff --git a/include/linux/ide.h b/include/linux/ide.h index eddb6daadf4a..3261c6691759 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -857,8 +857,6 @@ int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long); extern ide_startstop_t ide_do_reset (ide_drive_t *); -extern void ide_init_drive_cmd (struct request *rq); - /* * "action" parameter type for ide_do_drive_cmd() below. */ -- cgit v1.2.3 From ed820f19521de246c5b7978f8f78290733a55b20 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:45 +0200 Subject: ide-cd: remove ide_cd_init_rq ide_cd_init_rq is not used by ide-cd_ioctl any more. Only cdrom_queue_request_sense use it. This converts cdrom_queue_request_sense to use blk_rq_init directly and removes ide_cd_init_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 14 +++----------- drivers/ide/ide-cd.h | 1 - 2 files changed, 3 insertions(+), 12 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 7917cd576446..ac542ffffa49 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -188,16 +188,6 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive, ide_cd_log_error(drive->name, failed_command, sense); } -/* Initialize a ide-cd packet command request */ -void ide_cd_init_rq(ide_drive_t *drive, struct request *rq) -{ - struct cdrom_info *cd = drive->driver_data; - - blk_rq_init(NULL, rq); - rq->cmd_type = REQ_TYPE_ATA_PC; - rq->rq_disk = cd->disk; -} - static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, struct request *failed_command) { @@ -208,7 +198,9 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, sense = &info->sense_data; /* stuff the sense request in front of our current request */ - ide_cd_init_rq(drive, rq); + blk_rq_init(NULL, rq); + rq->cmd_type = REQ_TYPE_ATA_PC; + rq->rq_disk = info->disk; rq->data = sense; rq->cmd[0] = GPCMD_REQUEST_SENSE; diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h index df01cfd797cf..fe0ea36e4124 100644 --- a/drivers/ide/ide-cd.h +++ b/drivers/ide/ide-cd.h @@ -143,7 +143,6 @@ struct cdrom_info { void ide_cd_log_error(const char *, struct request *, struct request_sense *); /* ide-cd.c functions used by ide-cd_ioctl.c */ -void ide_cd_init_rq(ide_drive_t *, struct request *); int ide_cd_queue_pc(ide_drive_t *, const unsigned char *, int, void *, unsigned *, struct request_sense *, int, unsigned int); int ide_cd_read_toc(ide_drive_t *, struct request_sense *); -- cgit v1.2.3 From d79c5a670ddf076a346ddcf3d9e21785ecab963f Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:45 +0200 Subject: block: convert pd_special_command to use blk_execute_rq pd_special_command uses blk_put_request with struct request on the stack. As a result, blk_put_request needs a hack to catch a NULL request_queue. This converts pd_special_command to use blk_execute_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Signed-off-by: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/block/paride/pd.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/block/paride/pd.c b/drivers/block/paride/pd.c index 570f3b70dce7..5fdfa7c888ce 100644 --- a/drivers/block/paride/pd.c +++ b/drivers/block/paride/pd.c @@ -712,19 +712,17 @@ static void do_pd_request(struct request_queue * q) static int pd_special_command(struct pd_unit *disk, enum action (*func)(struct pd_unit *disk)) { - DECLARE_COMPLETION_ONSTACK(wait); - struct request rq; + struct request *rq; int err = 0; - blk_rq_init(NULL, &rq); - rq.rq_disk = disk->gd; - rq.end_io_data = &wait; - rq.end_io = blk_end_sync_rq; - blk_insert_request(disk->gd->queue, &rq, 0, func); - wait_for_completion(&wait); - if (rq.errors) - err = -EIO; - blk_put_request(&rq); + rq = blk_get_request(disk->gd->queue, READ, __GFP_WAIT); + + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->special = func; + + err = blk_execute_rq(disk->gd->queue, disk->gd, rq, 0); + + blk_put_request(rq); return err; } -- cgit v1.2.3 From 52a93ba815737e3877f85b46850cffe993a22429 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:45 +0200 Subject: block: remove the checking for NULL queue in blk_put_request Some uses blk_put_request asymmetrically, that is, they uses it with requests that not allocated by blk_get_request. As a result, blk_put_request has a hack to catch a NULL request_queue. Now such callers are fixed (they use blk_get_request properly). So we can safely remove the hack in blk_put_request. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Signed-off-by: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- block/blk-core.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 1905aaba49fb..ac83cf9a19ae 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1042,15 +1042,9 @@ void blk_put_request(struct request *req) unsigned long flags; struct request_queue *q = req->q; - /* - * Gee, IDE calls in w/ NULL q. Fix IDE and remove the - * following if (q) test. - */ - if (q) { - spin_lock_irqsave(q->queue_lock, flags); - __blk_put_request(q, req); - spin_unlock_irqrestore(q->queue_lock, flags); - } + spin_lock_irqsave(q->queue_lock, flags); + __blk_put_request(q, req); + spin_unlock_irqrestore(q->queue_lock, flags); } EXPORT_SYMBOL(blk_put_request); -- cgit v1.2.3 From 681a561b7ec7fdcd8f35b68e44ac6d6c70aecc04 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:45 +0200 Subject: block: unexport blk_end_sync_rq All the users of blk_end_sync_rq has gone (they are converted to use blk_execute_rq). This unexports blk_end_sync_rq. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Signed-off-by: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- block/blk-exec.c | 3 +-- include/linux/blkdev.h | 1 - 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/block/blk-exec.c b/block/blk-exec.c index 4f52f2792059..9bceff7674f2 100644 --- a/block/blk-exec.c +++ b/block/blk-exec.c @@ -18,7 +18,7 @@ * @rq: request to complete * @error: end io status of the request */ -void blk_end_sync_rq(struct request *rq, int error) +static void blk_end_sync_rq(struct request *rq, int error) { struct completion *waiting = rq->end_io_data; @@ -31,7 +31,6 @@ void blk_end_sync_rq(struct request *rq, int error) */ complete(waiting); } -EXPORT_SYMBOL(blk_end_sync_rq); /** * blk_execute_rq_nowait - insert a request into queue for execution diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index d2a1b71e93c3..1171abd7eb17 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -623,7 +623,6 @@ extern void generic_make_request(struct bio *bio); extern void blk_rq_init(struct request_queue *q, struct request *rq); extern void blk_put_request(struct request *); extern void __blk_put_request(struct request_queue *, struct request *); -extern void blk_end_sync_rq(struct request *rq, int error); extern struct request *blk_get_request(struct request_queue *, int, gfp_t); extern void blk_insert_request(struct request_queue *, struct request *, int, void *); extern void blk_requeue_request(struct request_queue *, struct request *); -- cgit v1.2.3 From 30e5ee4d1a651a0c66e86c6612c003034bd20ba2 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:46 +0200 Subject: ide: remove obsoleted "idebus=" kernel parameter * Remove obsoleted "idebus=" kernel parameter. * Remove no longer needed ide_system_bus_speed() and system_bus_clock() (together with idebus_parameter and system_bus_speed variables). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 71 +------------------------------------------- drivers/ide/legacy/ali14xx.c | 2 +- drivers/ide/legacy/ht6560b.c | 2 +- drivers/ide/legacy/qd65xx.c | 4 +-- drivers/ide/pci/aec62xx.c | 2 +- drivers/ide/pci/alim15x3.c | 2 +- drivers/ide/pci/amd74xx.c | 2 +- drivers/ide/pci/cmd640.c | 8 ++--- drivers/ide/pci/cmd64x.c | 4 +-- drivers/ide/pci/cy82c693.c | 2 +- drivers/ide/pci/via82cxxx.c | 2 +- include/linux/ide.h | 2 -- 12 files changed, 15 insertions(+), 88 deletions(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 8823df1b8716..f65be738b16a 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -86,9 +86,6 @@ static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR, IDE6_MAJOR, IDE7_MAJOR, IDE8_MAJOR, IDE9_MAJOR }; -static int idebus_parameter; /* holds the "idebus=" parameter */ -static int system_bus_speed; /* holds what we think is VESA/PCI bus speed */ - DEFINE_MUTEX(ide_cfg_mtx); __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); @@ -189,38 +186,6 @@ static void __init init_ide_data (void) } } -/** - * ide_system_bus_speed - guess bus speed - * - * ide_system_bus_speed() returns what we think is the system VESA/PCI - * bus speed (in MHz). This is used for calculating interface PIO timings. - * The default is 40 for known PCI systems, 50 otherwise. - * The "idebus=xx" parameter can be used to override this value. - * The actual value to be used is computed/displayed the first time - * through. Drivers should only use this as a last resort. - * - * Returns a guessed speed in MHz. - */ - -static int ide_system_bus_speed(void) -{ -#ifdef CONFIG_PCI - static struct pci_device_id pci_default[] = { - { PCI_DEVICE(PCI_ANY_ID, PCI_ANY_ID) }, - { } - }; -#else -#define pci_default 0 -#endif /* CONFIG_PCI */ - - /* user supplied value */ - if (idebus_parameter) - return idebus_parameter; - - /* safe default value for PCI or VESA and PCI*/ - return pci_dev_present(pci_default) ? 33 : 50; -} - void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) { ide_hwgroup_t *hwgroup = hwif->hwgroup; @@ -540,20 +505,6 @@ static int set_unmaskirq(ide_drive_t *drive, int arg) return 0; } -/** - * system_bus_clock - clock guess - * - * External version of the bus clock guess used by very old IDE drivers - * for things like VLB timings. Should not be used. - */ - -int system_bus_clock (void) -{ - return system_bus_speed; -} - -EXPORT_SYMBOL(system_bus_clock); - static int generic_ide_suspend(struct device *dev, pm_message_t mesg) { ide_drive_t *drive = dev->driver_data; @@ -851,7 +802,7 @@ static int __init ide_setup(char *s) if (strncmp(s,"hd",2) == 0 && s[2] == '=') /* hd= is for hd.c */ return 0; /* driver and not us */ - if (strncmp(s,"ide",3) && strncmp(s,"idebus",6) && strncmp(s,"hd",2)) + if (strncmp(s, "ide", 3) && strncmp(s, "hd", 2)) return 0; printk(KERN_INFO "ide_setup: %s", s); @@ -951,21 +902,6 @@ static int __init ide_setup(char *s) } } - if (s[0] != 'i' || s[1] != 'd' || s[2] != 'e') - goto bad_option; - /* - * Look for bus speed option: "idebus=" - */ - if (s[3] == 'b' && s[4] == 'u' && s[5] == 's') { - if (match_parm(&s[6], NULL, vals, 1) != 1) - goto bad_option; - if (vals[0] >= 20 && vals[0] <= 66) { - idebus_parameter = vals[0]; - } else - printk(" -- BAD BUS SPEED! Expected value from 20 to 66"); - goto obsolete_option; - } - bad_option: printk(" -- BAD OPTION\n"); return 1; @@ -1287,11 +1223,6 @@ static int __init ide_init(void) int ret; printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n"); - system_bus_speed = ide_system_bus_speed(); - - printk(KERN_INFO "ide: Assuming %dMHz system bus speed " - "for PIO modes%s\n", system_bus_speed, - idebus_parameter ? "" : "; override with idebus=xx"); ret = bus_register(&ide_bus_type); if (ret < 0) { diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index 90c65cf97448..052125fafcfa 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -116,7 +116,7 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) int time1, time2; u8 param1, param2, param3, param4; unsigned long flags; - int bus_speed = ide_vlb_clk ? ide_vlb_clk : system_bus_clock(); + int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; /* calculate timing, according to PIO mode */ time1 = ide_pio_cycle_time(drive, pio); diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index 4fe516df9f74..dd6dfb32e853 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -212,7 +212,7 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio) { int active_time, recovery_time; int active_cycles, recovery_cycles; - int bus_speed = ide_vlb_clk ? ide_vlb_clk : system_bus_clock(); + int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; if (pio) { unsigned int cycle_time; diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 6424af154325..51dba82f8812 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -110,7 +110,7 @@ static void qd65xx_select(ide_drive_t *drive) static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time) { - int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock(); + int clk = ide_vlb_clk ? ide_vlb_clk : 50; u8 act_cyc, rec_cyc; if (clk <= 33) { @@ -132,7 +132,7 @@ static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery static u8 qd6580_compute_timing (int active_time, int recovery_time) { - int clk = ide_vlb_clk ? ide_vlb_clk : system_bus_clock(); + int clk = ide_vlb_clk ? ide_vlb_clk : 50; u8 act_cyc, rec_cyc; act_cyc = 17 - IDE_IN(active_time * clk / 1000 + 1, 2, 17); diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 7f46c224b7c4..ae7a4329a581 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -140,7 +140,7 @@ static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name) { - int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; if (bus_speed <= 33) pci_set_drvdata(dev, (void *) aec6xxx_33_base); diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index f2129d5e07f2..f2de00adf147 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -72,7 +72,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) int s_time, a_time, c_time; u8 s_clc, a_clc, r_clc; unsigned long flags; - int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; int port = hwif->channel ? 0x5c : 0x58; int portFIFO = hwif->channel ? 0x55 : 0x54; u8 cd_dma_fifo = 0; diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index a373101747b6..ad222206a429 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -179,7 +179,7 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, * Determine the system bus clock. */ - amd_clock = (ide_pci_clk ? ide_pci_clk : system_bus_clock()) * 1000; + amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000; switch (amd_clock) { case 33000: amd_clock = 33333; break; diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index b38a1980dcd5..cd1ba14984ab 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -525,12 +525,10 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count; int bus_speed; - if (cmd640_vlb && ide_vlb_clk) - bus_speed = ide_vlb_clk; - else if (!cmd640_vlb && ide_pci_clk) - bus_speed = ide_pci_clk; + if (cmd640_vlb) + bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; else - bus_speed = system_bus_clock(); + bus_speed = ide_pci_clk ? ide_pci_clk : 33; if (pio_mode > 5) pio_mode = 5; diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 08674711d089..ca4774aa27ee 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -69,7 +69,7 @@ static u8 quantize_timing(int timing, int quant) static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time) { struct pci_dev *dev = to_pci_dev(drive->hwif->dev); - int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : system_bus_clock()); + int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33); u8 cycle_count, active_count, recovery_count, drwtim; static const u8 recovery_values[] = {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; @@ -128,7 +128,7 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) ide_pio_timings[pio].active_time); setup_count = quantize_timing(ide_pio_timings[pio].setup_time, - 1000 / (ide_pci_clk ? ide_pci_clk : system_bus_clock())); + 1000 / (ide_pci_clk ? ide_pci_clk : 33)); /* * The primary channel has individual address setup timing registers diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 77cc22c2ad45..8c534afcb6c8 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -134,7 +134,7 @@ static int calc_clk(int time, int bus_speed) static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) { int clk1, clk2; - int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); + int bus_speed = ide_pci_clk ? ide_pci_clk : 33; /* we don't check against CY82C693's min and max speed, * so you can play with the idebus=xx parameter diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index e8c2570003ff..3ed9728abd24 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -340,7 +340,7 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const * Determine system bus clock. */ - via_clock = (ide_pci_clk ? ide_pci_clk : system_bus_clock()) * 1000; + via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000; switch (via_clock) { case 33000: via_clock = 33333; break; diff --git a/include/linux/ide.h b/include/linux/ide.h index 3261c6691759..dad535659249 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -994,8 +994,6 @@ int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long); int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long); int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long); -extern int system_bus_clock(void); - extern int ide_driveid_update(ide_drive_t *); extern int ide_config_drive_speed(ide_drive_t *, u8); extern u8 eighty_ninty_three (ide_drive_t *); -- cgit v1.2.3 From 232595eaff951e96cabe5e85fed35f66b72ff51e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:46 +0200 Subject: ide: remove obsoleted "hdx=" kernel parameters * Remove obsoleted "hdx=" kernel parameters. * Remove no longer used stridx() and match_parm(). Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/kernel-parameters.txt | 3 - drivers/ide/ide.c | 139 +----------------------------------- 2 files changed, 1 insertion(+), 141 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index b52f47d588b4..faeea507cdca 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -722,9 +722,6 @@ and is between 256 and 4096 characters. It is defined in the file hd= [EIDE] (E)IDE hard drive subsystem geometry Format: ,, - hd?= [HW] (E)IDE subsystem - hd?lun= See Documentation/ide/ide.txt. - highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact size of . This works even on boxes that have no highmem otherwise. This also works to reduce highmem diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index f65be738b16a..6f600d81a972 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -721,90 +721,14 @@ set_val: EXPORT_SYMBOL(generic_ide_ioctl); -/* - * stridx() returns the offset of c within s, - * or -1 if c is '\0' or not found within s. - */ -static int __init stridx (const char *s, char c) -{ - char *i = strchr(s, c); - return (i && c) ? i - s : -1; -} - -/* - * match_parm() does parsing for ide_setup(): - * - * 1. the first char of s must be '='. - * 2. if the remainder matches one of the supplied keywords, - * the index (1 based) of the keyword is negated and returned. - * 3. if the remainder is a series of no more than max_vals numbers - * separated by commas, the numbers are saved in vals[] and a - * count of how many were saved is returned. Base10 is assumed, - * and base16 is allowed when prefixed with "0x". - * 4. otherwise, zero is returned. - */ -static int __init match_parm (char *s, const char *keywords[], int vals[], int max_vals) -{ - static const char *decimal = "0123456789"; - static const char *hex = "0123456789abcdef"; - int i, n; - - if (*s++ == '=') { - /* - * Try matching against the supplied keywords, - * and return -(index+1) if we match one - */ - if (keywords != NULL) { - for (i = 0; *keywords != NULL; ++i) { - if (!strcmp(s, *keywords++)) - return -(i+1); - } - } - /* - * Look for a series of no more than "max_vals" - * numeric values separated by commas, in base10, - * or base16 when prefixed with "0x". - * Return a count of how many were found. - */ - for (n = 0; (i = stridx(decimal, *s)) >= 0;) { - vals[n] = i; - while ((i = stridx(decimal, *++s)) >= 0) - vals[n] = (vals[n] * 10) + i; - if (*s == 'x' && !vals[n]) { - while ((i = stridx(hex, *++s)) >= 0) - vals[n] = (vals[n] * 0x10) + i; - } - if (++n == max_vals) - break; - if (*s == ',' || *s == ';') - ++s; - } - if (!*s) - return n; - } - return 0; /* zero = nothing matched */ -} - /* * ide_setup() gets called VERY EARLY during initialization, - * to handle kernel "command line" strings beginning with "hdx=" or "ide". + * to handle kernel "command line" strings beginning with "ide". * * Remember to update Documentation/ide/ide.txt if you change something here. */ static int __init ide_setup(char *s) { - ide_hwif_t *hwif; - ide_drive_t *drive; - unsigned int hw, unit; - int vals[3]; - const char max_drive = 'a' + ((MAX_HWIFS * MAX_DRIVES) - 1); - - if (strncmp(s,"hd",2) == 0 && s[2] == '=') /* hd= is for hd.c */ - return 0; /* driver and not us */ - - if (strncmp(s, "ide", 3) && strncmp(s, "hd", 2)) - return 0; - printk(KERN_INFO "ide_setup: %s", s); init_ide_data (); @@ -842,67 +766,6 @@ static int __init ide_setup(char *s) } #endif /* CONFIG_BLK_DEV_IDEACPI */ - /* - * Look for drive options: "hdx=" - */ - if (s[0] == 'h' && s[1] == 'd' && s[2] >= 'a' && s[2] <= max_drive) { - const char *hd_words[] = { - "none", "noprobe", "nowerr", "cdrom", "nodma", - "-6", "-7", "-8", "-9", "-10", - "noflush", "remap", "remap63", "scsi", NULL }; - unit = s[2] - 'a'; - hw = unit / MAX_DRIVES; - unit = unit % MAX_DRIVES; - hwif = &ide_hwifs[hw]; - drive = &hwif->drives[unit]; - if (strncmp(s + 4, "ide-", 4) == 0) { - strlcpy(drive->driver_req, s + 4, sizeof(drive->driver_req)); - goto obsolete_option; - } - switch (match_parm(&s[3], hd_words, vals, 3)) { - case -1: /* "none" */ - case -2: /* "noprobe" */ - drive->noprobe = 1; - goto obsolete_option; - case -3: /* "nowerr" */ - drive->bad_wstat = BAD_R_STAT; - goto obsolete_option; - case -4: /* "cdrom" */ - drive->present = 1; - drive->media = ide_cdrom; - /* an ATAPI device ignores DRDY */ - drive->ready_stat = 0; - goto obsolete_option; - case -5: /* nodma */ - drive->nodma = 1; - goto obsolete_option; - case -11: /* noflush */ - drive->noflush = 1; - goto obsolete_option; - case -12: /* "remap" */ - drive->remap_0_to_1 = 1; - goto obsolete_option; - case -13: /* "remap63" */ - drive->sect0 = 63; - goto obsolete_option; - case -14: /* "scsi" */ - drive->scsi = 1; - goto obsolete_option; - case 3: /* cyl,head,sect */ - drive->media = ide_disk; - drive->ready_stat = READY_STAT; - drive->cyl = drive->bios_cyl = vals[0]; - drive->head = drive->bios_head = vals[1]; - drive->sect = drive->bios_sect = vals[2]; - drive->present = 1; - drive->forced_geom = 1; - goto obsolete_option; - default: - goto bad_option; - } - } - -bad_option: printk(" -- BAD OPTION\n"); return 1; obsolete_option: -- cgit v1.2.3 From dbac9f895f628deebc99dee86dfd21c1823013c3 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:46 +0200 Subject: ide: cleanup init_ide_data() * Remove no longer need init_ide_data() call from ide_setup(). * Cleanup init_ide_data(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 24 ------------------------ 1 file changed, 24 deletions(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 6f600d81a972..e8c88ff2f6b6 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -151,32 +151,9 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif) } } -/* - * init_ide_data() sets reasonable default values into all fields - * of all instances of the hwifs and drives, but only on the first call. - * Subsequent calls have no effect (they don't wipe out anything). - * - * This routine is normally called at driver initialization time, - * but may also be called MUCH earlier during kernel "command-line" - * parameter processing. As such, we cannot depend on any other parts - * of the kernel (such as memory allocation) to be functioning yet. - * - * This is too bad, as otherwise we could dynamically allocate the - * ide_drive_t structs as needed, rather than always consuming memory - * for the max possible number (MAX_HWIFS * MAX_DRIVES) of them. - * - * FIXME: We should stuff the setup data into __init and copy the - * relevant hwifs/allocate them properly during boot. - */ -#define MAGIC_COOKIE 0x12345678 static void __init init_ide_data (void) { unsigned int index; - static unsigned long magic_cookie = MAGIC_COOKIE; - - if (magic_cookie != MAGIC_COOKIE) - return; /* already initialized */ - magic_cookie = 0; /* Initialise all interface structures */ for (index = 0; index < MAX_HWIFS; ++index) { @@ -730,7 +707,6 @@ EXPORT_SYMBOL(generic_ide_ioctl); static int __init ide_setup(char *s) { printk(KERN_INFO "ide_setup: %s", s); - init_ide_data (); #ifdef CONFIG_BLK_DEV_IDEDOUBLER if (!strcmp(s, "ide=doubler")) { -- cgit v1.2.3 From 931ee0dc5c69e8113233d21942681ab8fecde7f9 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:47 +0200 Subject: ide: remove obsoleted "ide=" kernel parameters * Remove obsoleted "ide=" kernel parameters. * Remove no longer needed: - ide_setup() - parse_options() - __setup("", ...) - module_param(options, ...) * Use module_{init,exit}() for MODULE=y case and remove MODULE ifdef. * Make ide_*acpi* and ide_doubler variables static. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-acpi.c | 6 +-- drivers/ide/ide-dma.c | 2 +- drivers/ide/ide.c | 91 +++------------------------------------------- drivers/ide/legacy/gayle.c | 4 +- include/linux/ide.h | 4 -- 5 files changed, 10 insertions(+), 97 deletions(-) diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 9d3601fa5680..6f704628c27d 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -60,15 +60,15 @@ struct ide_acpi_hwif_link { #define DEBPRINT(fmt, args...) do {} while (0) #endif /* DEBUGGING */ -int ide_noacpi; +static int ide_noacpi; module_param_named(noacpi, ide_noacpi, bool, 0); MODULE_PARM_DESC(noacpi, "disable IDE ACPI support"); -int ide_acpigtf; +static int ide_acpigtf; module_param_named(acpigtf, ide_acpigtf, bool, 0); MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support"); -int ide_acpionboot; +static int ide_acpionboot; module_param_named(acpionboot, ide_acpionboot, bool, 0); MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot"); diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 653b1ade13d3..174f4704614c 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -692,7 +692,7 @@ static int ide_tune_dma(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; u8 speed; - if (noautodma || drive->nodma || (drive->id->capability & 1) == 0) + if (drive->nodma || (drive->id->capability & 1) == 0) return 0; /* consult the list of known "bad" drives */ diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index e8c88ff2f6b6..1defba3eefe7 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -87,9 +87,9 @@ static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR, IDE8_MAJOR, IDE9_MAJOR }; DEFINE_MUTEX(ide_cfg_mtx); - __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); -int noautodma = 0; +__cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); +EXPORT_SYMBOL(ide_lock); ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ @@ -698,59 +698,6 @@ set_val: EXPORT_SYMBOL(generic_ide_ioctl); -/* - * ide_setup() gets called VERY EARLY during initialization, - * to handle kernel "command line" strings beginning with "ide". - * - * Remember to update Documentation/ide/ide.txt if you change something here. - */ -static int __init ide_setup(char *s) -{ - printk(KERN_INFO "ide_setup: %s", s); - -#ifdef CONFIG_BLK_DEV_IDEDOUBLER - if (!strcmp(s, "ide=doubler")) { - extern int ide_doubler; - - printk(" : Enabled support for IDE doublers\n"); - ide_doubler = 1; - goto obsolete_option; - } -#endif /* CONFIG_BLK_DEV_IDEDOUBLER */ - - if (!strcmp(s, "ide=nodma")) { - printk(" : Prevented DMA\n"); - noautodma = 1; - goto obsolete_option; - } - -#ifdef CONFIG_BLK_DEV_IDEACPI - if (!strcmp(s, "ide=noacpi")) { - //printk(" : Disable IDE ACPI support.\n"); - ide_noacpi = 1; - goto obsolete_option; - } - if (!strcmp(s, "ide=acpigtf")) { - //printk(" : Enable IDE ACPI _GTF support.\n"); - ide_acpigtf = 1; - goto obsolete_option; - } - if (!strcmp(s, "ide=acpionboot")) { - //printk(" : Call IDE ACPI methods on boot.\n"); - ide_acpionboot = 1; - goto obsolete_option; - } -#endif /* CONFIG_BLK_DEV_IDEACPI */ - - printk(" -- BAD OPTION\n"); - return 1; -obsolete_option: - printk(" -- OBSOLETE OPTION, WILL BE REMOVED SOON!\n"); - return 1; -} - -EXPORT_SYMBOL(ide_lock); - static int ide_bus_match(struct device *dev, struct device_driver *drv) { return 1; @@ -1087,32 +1034,7 @@ out_port_class: return ret; } -#ifdef MODULE -static char *options = NULL; -module_param(options, charp, 0); -MODULE_LICENSE("GPL"); - -static void __init parse_options (char *line) -{ - char *next = line; - - if (line == NULL || !*line) - return; - while ((line = next) != NULL) { - if ((next = strchr(line,' ')) != NULL) - *next++ = 0; - if (!ide_setup(line)) - printk (KERN_INFO "Unknown option '%s'\n", line); - } -} - -int __init init_module (void) -{ - parse_options(options); - return ide_init(); -} - -void __exit cleanup_module (void) +static void __exit ide_exit(void) { proc_ide_destroy(); @@ -1121,10 +1043,7 @@ void __exit cleanup_module (void) bus_unregister(&ide_bus_type); } -#else /* !MODULE */ - -__setup("", ide_setup); - module_init(ide_init); +module_exit(ide_exit); -#endif /* MODULE */ +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index fed7d812761c..b78941680c32 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -64,9 +64,7 @@ #define GAYLE_HAS_CONTROL_REG (!ide_doubler) #define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000) -int ide_doubler = 0; /* support IDE doublers? */ -EXPORT_SYMBOL_GPL(ide_doubler); - +static int ide_doubler; module_param_named(doubler, ide_doubler, bool, 0); MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); #endif /* CONFIG_BLK_DEV_IDEDOUBLER */ diff --git a/include/linux/ide.h b/include/linux/ide.h index dad535659249..0fa1812d0438 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -813,10 +813,6 @@ int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsig #ifndef _IDE_C extern ide_hwif_t ide_hwifs[]; /* master data repository */ #endif -extern int ide_noacpi; -extern int ide_acpigtf; -extern int ide_acpionboot; -extern int noautodma; extern int ide_vlb_clk; extern int ide_pci_clk; -- cgit v1.2.3 From 57279a7a401eed844ded4346c5ff512e622ac1de Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:47 +0200 Subject: ide: remove try_to_flush_leftover_data() Just use the new & shiny ide_pad_transfer() helper instead. Also remove the superfluous check for 'drive->media == ide_disk' while at it (ide_ata_error() is used only for ide_disk devices). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 32 +++++--------------------------- 1 file changed, 5 insertions(+), 27 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index d8b4d9f81ae2..c22a337ced4e 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -358,31 +358,6 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) EXPORT_SYMBOL(ide_end_drive_cmd); -/** - * try_to_flush_leftover_data - flush junk - * @drive: drive to flush - * - * try_to_flush_leftover_data() is invoked in response to a drive - * unexpectedly having its DRQ_STAT bit set. As an alternative to - * resetting the drive, this routine tries to clear the condition - * by read a sector's worth of data from the drive. Of course, - * this may not help if the drive is *waiting* for data from *us*. - */ -static void try_to_flush_leftover_data (ide_drive_t *drive) -{ - int i = (drive->mult_count ? drive->mult_count : 1) * SECTOR_WORDS; - - if (drive->media != ide_disk) - return; - while (i > 0) { - u32 buffer[16]; - u32 wcount = (i > 16) ? 16 : i; - - i -= wcount; - drive->hwif->input_data(drive, NULL, buffer, wcount * 4); - } -} - static void ide_kill_rq(ide_drive_t *drive, struct request *rq) { if (rq->rq_disk) { @@ -422,8 +397,11 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 } if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ && - (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) - try_to_flush_leftover_data(drive); + (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) { + int nsect = drive->mult_count ? drive->mult_count : 1; + + ide_pad_transfer(drive, READ, nsect * SECTOR_SIZE); + } if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) { ide_kill_rq(drive, rq); -- cgit v1.2.3 From 912ef6d94cc07ce5db19a8ed8953676727d4f30c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:47 +0200 Subject: sgiioc4: use ->extra_base instead of ->dma_status for dma_handle This is a preparation for removal of ->dma_status field from ide_hwif_t. There should be no functional changes caused by this patch. Acked-by: Jeremy Higdon Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sgiioc4.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 16a0bce17d69..c1b667c53f2b 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -369,8 +369,7 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d) hwif->sg_max_nents = IOC4_PRD_ENTRIES; pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE, - (dma_addr_t *) &(hwif->dma_status)); - + (dma_addr_t *)&hwif->extra_base); if (pad) { ide_set_hwifdata(hwif, pad); return 0; @@ -439,7 +438,7 @@ sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive) /* Address of the Ending DMA */ memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE); - ending_dma_addr = cpu_to_le32(hwif->dma_status); + ending_dma_addr = cpu_to_le32(hwif->extra_base); writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4)); writel(dma_direction, (void __iomem *)ioc4_dma_addr); -- cgit v1.2.3 From 49e153e68187454e296f1e03442393f1a3f1d69c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:47 +0200 Subject: ide: remove commented out code from ide_config_drive_speed() Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index c2dd20aa15a6..2de4c8f581eb 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -744,9 +744,6 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) int error = 0; u8 stat; -// while (HWGROUP(drive)->busy) -// msleep(50); - #ifdef CONFIG_BLK_DEV_IDEDMA if (hwif->dma_ops) /* check if host supports DMA */ hwif->dma_ops->dma_host_set(drive, 0); -- cgit v1.2.3 From e81a3bde13343bc36613aff8f864def7171b376a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:48 +0200 Subject: ide: fix do_probe() to use SELECT_DRIVE() Fix one place in do_probe() which used ->OUTB directly instead of calling SELECT_DRIVE() (so ->selectproc method is also used). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 26e68b65b7cf..12513c45d700 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -478,7 +478,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) printk(KERN_ERR "%s: no response (status = 0x%02x), " "resetting drive\n", drive->name, stat); msleep(50); - hwif->OUTB(drive->select.all, io_ports->device_addr); + SELECT_DRIVE(drive); msleep(50); hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr); (void)ide_busy_sleep(hwif); -- cgit v1.2.3 From 9a410e79b552bacb4481f85618aa7333b7776ed7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:48 +0200 Subject: ide: remove IDE_TFLAG_NO_SELECT_MASK taskfile flag Always call SELECT_MASK(..., 0) in ide_tf_load() (needs to be done to match ide_set_irq(..., 1)) and then remove IDE_TFLAG_NO_SELECT_MASK taskfile flag. This change should only affect hpt366 and icside host drivers since ->maskproc(..., 0) for sgiioc4 is equivalent to ide_set_irq(..., 1). Cc: Sergei Shtylyov Cc: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 4 ++-- drivers/ide/ide-disk.c | 3 +-- drivers/ide/ide-floppy.c | 3 +-- drivers/ide/ide-iops.c | 4 +--- drivers/ide/ide-tape.c | 3 +-- drivers/scsi/ide-scsi.c | 2 +- include/linux/ide.h | 1 - 7 files changed, 7 insertions(+), 13 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index ac542ffffa49..0fbc2d8d0d53 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -530,8 +530,8 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, info->dma = !hwif->dma_ops->dma_setup(drive); /* set up the controller registers */ - ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL | - IDE_TFLAG_NO_SELECT_MASK, xferlen, info->dma); + ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL, + xferlen, info->dma); if (info->cd_flags & IDE_CD_FLAG_DRQ_INTERRUPT) { /* waiting for CDB interrupt, not DMA yet. */ diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index c5f22ef8ed24..5f49a4ae9dd8 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -198,8 +198,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq, } memset(&task, 0, sizeof(task)); - task.tf_flags = IDE_TFLAG_NO_SELECT_MASK; /* FIXME? */ - task.tf_flags |= (IDE_TFLAG_TF | IDE_TFLAG_DEVICE); + task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; if (drive->select.b.lba) { if (lba48) { diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 9161cd92a842..1852008d9ee4 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -667,8 +667,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) dma = !hwif->dma_ops->dma_setup(drive); - ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | - IDE_TFLAG_OUT_DEVICE, bcount, dma); + ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma); if (dma) { /* Begin DMA, if necessary */ diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 2de4c8f581eb..9f9916fe6c2f 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -121,9 +121,7 @@ static void ide_tf_load(ide_drive_t *drive, ide_task_t *task) HIHI = 0xFF; ide_set_irq(drive, 1); - - if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0) - SELECT_MASK(drive, 0); + SELECT_MASK(drive, 0); if (task->tf_flags & IDE_TFLAG_OUT_DATA) { u16 data = (tf->hob_data << 8) | tf->data; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index a5f0b774527b..cc7991c7c252 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1046,8 +1046,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) dma_ok = !hwif->dma_ops->dma_setup(drive); - ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | - IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); + ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); if (dma_ok) /* Will begin DMA later */ diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index da261806d62a..3222aa589dbf 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -564,7 +564,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, hwif->sg_mapped = 0; } - ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK, bcount, dma); + ide_pktcmd_tf_load(drive, 0, bcount, dma); if (dma) pc->flags |= PC_FLAG_DMA_OK; diff --git a/include/linux/ide.h b/include/linux/ide.h index 0fa1812d0438..d4a910cdb907 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -869,7 +869,6 @@ extern void ide_end_drive_cmd(ide_drive_t *, u8, u8); enum { IDE_TFLAG_LBA48 = (1 << 0), - IDE_TFLAG_NO_SELECT_MASK = (1 << 1), IDE_TFLAG_FLAGGED = (1 << 2), IDE_TFLAG_OUT_DATA = (1 << 3), IDE_TFLAG_OUT_HOB_FEATURE = (1 << 4), -- cgit v1.2.3 From ed4af48fd660176680da905817f6e40d51436e4c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:48 +0200 Subject: ide: move IRQ unmasking out from ->tf_load method Move IRQ unmasking out from ->tf_load method to its users. There should be no functional changes caused by this patch (SELECT_MASK() is NOP except for hpt366, icside and sgiioc4). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/h8300/ide-h8300.c | 2 -- drivers/ide/ide-io.c | 2 ++ drivers/ide/ide-iops.c | 5 +---- drivers/ide/ide-taskfile.c | 2 ++ drivers/ide/pci/scc_pata.c | 2 -- include/linux/ide.h | 1 + 6 files changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index ecf53bb0d2aa..d5afc28eaae7 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -52,8 +52,6 @@ static void h8300_tf_load(ide_drive_t *drive, ide_task_t *task) if (task->tf_flags & IDE_TFLAG_FLAGGED) HIHI = 0xFF; - ide_set_irq(drive, 1); - if (task->tf_flags & IDE_TFLAG_OUT_DATA) mm_outw((tf->hob_data << 8) | tf->data, io_ports->data_addr); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index c22a337ced4e..2083cc08b2ce 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1579,6 +1579,8 @@ void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma) task.tf.lbah = (bcount >> 8) & 0xff; ide_tf_dump(drive->name, &task.tf); + ide_set_irq(drive, 1); + SELECT_MASK(drive, 0); drive->hwif->tf_load(drive, &task); } diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 9f9916fe6c2f..491980aab866 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -95,7 +95,7 @@ void SELECT_DRIVE (ide_drive_t *drive) hwif->OUTB(drive->select.all, hwif->io_ports.device_addr); } -static void SELECT_MASK(ide_drive_t *drive, int mask) +void SELECT_MASK(ide_drive_t *drive, int mask) { const struct ide_port_ops *port_ops = drive->hwif->port_ops; @@ -120,9 +120,6 @@ static void ide_tf_load(ide_drive_t *drive, ide_task_t *task) if (task->tf_flags & IDE_TFLAG_FLAGGED) HIHI = 0xFF; - ide_set_irq(drive, 1); - SELECT_MASK(drive, 0); - if (task->tf_flags & IDE_TFLAG_OUT_DATA) { u16 data = (tf->hob_data << 8) | tf->data; diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index b6a1c4b51129..6a17ab54f801 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -109,6 +109,8 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) { ide_tf_dump(drive->name, tf); + ide_set_irq(drive, 1); + SELECT_MASK(drive, 0); hwif->tf_load(drive, task); } diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 910fb00deb71..37e8cfcabb4b 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -662,8 +662,6 @@ static void scc_tf_load(ide_drive_t *drive, ide_task_t *task) if (task->tf_flags & IDE_TFLAG_FLAGGED) HIHI = 0xFF; - ide_set_irq(drive, 1); - if (task->tf_flags & IDE_TFLAG_OUT_DATA) out_be32((void *)io_ports->data_addr, (tf->hob_data << 8) | tf->data); diff --git a/include/linux/ide.h b/include/linux/ide.h index d4a910cdb907..56d0bc2dffee 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -973,6 +973,7 @@ typedef struct ide_task_s { void ide_tf_dump(const char *, struct ide_taskfile *); extern void SELECT_DRIVE(ide_drive_t *); +void SELECT_MASK(ide_drive_t *, int); extern int drive_is_ready(ide_drive_t *); -- cgit v1.2.3 From 135721446144af005109c25eeacca4fdddcd9a66 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:49 +0200 Subject: ide: remove ->mmio flag from ide_hwif_t Since scc_pata host driver no longer uses IDE PCI layer / ide_dma_setup() and all other ->mmio users set also IDE_HFLAG_MMIO host flag we can safely remove ->mmio flag. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/palm_bk3710.c | 1 - drivers/ide/ide-dma.c | 2 +- drivers/ide/pci/scc_pata.c | 1 - drivers/ide/pci/siimage.c | 25 +++++++++++++------------ drivers/ide/setup-pci.c | 4 ++-- include/linux/ide.h | 1 - 6 files changed, 16 insertions(+), 18 deletions(-) diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 74a05dc6d1e6..3839f5722985 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -405,7 +405,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); - hwif->mmio = 1; default_hwif_mmiops(hwif); idx[0] = i; diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 174f4704614c..7ee44f86bc54 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -463,7 +463,7 @@ int ide_dma_setup(ide_drive_t *drive) } /* PRD table */ - if (hwif->mmio) + if (hwif->host_flags & IDE_HFLAG_MMIO) writel(hwif->dmatable_dma, (void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS)); else diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 37e8cfcabb4b..133053c7a480 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -793,7 +793,6 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif) hwif->dma_base = dma_base; hwif->config_data = ports->ctl; - hwif->mmio = 1; } /** diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 0006b9e58567..b75e9bb390a7 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -94,7 +94,7 @@ static unsigned long siimage_selreg(ide_hwif_t *hwif, int r) unsigned long base = (unsigned long)hwif->hwif_data; base += 0xA0 + r; - if (hwif->mmio) + if (hwif->host_flags & IDE_HFLAG_MMIO) base += hwif->channel << 6; else base += hwif->channel << 4; @@ -117,7 +117,7 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r) unsigned long base = (unsigned long)hwif->hwif_data; base += 0xA0 + r; - if (hwif->mmio) + if (hwif->host_flags & IDE_HFLAG_MMIO) base += hwif->channel << 6; else base += hwif->channel << 4; @@ -190,7 +190,9 @@ static u8 sil_pata_udma_filter(ide_drive_t *drive) unsigned long base = (unsigned long)hwif->hwif_data; u8 scsc, mask = 0; - scsc = sil_ioread8(dev, base + (hwif->mmio ? 0x4A : 0x8A)); + base += (hwif->host_flags & IDE_HFLAG_MMIO) ? 0x4A : 0x8A; + + scsc = sil_ioread8(dev, base); switch (scsc & 0x30) { case 0x10: /* 133 */ @@ -238,8 +240,9 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) unsigned long tfaddr = siimage_selreg(hwif, 0x02); unsigned long base = (unsigned long)hwif->hwif_data; u8 tf_pio = pio; - u8 addr_mask = hwif->channel ? (hwif->mmio ? 0xF4 : 0x84) - : (hwif->mmio ? 0xB4 : 0x80); + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) + : (mmio ? 0xB4 : 0x80); u8 mode = 0; u8 unit = drive->select.b.unit; @@ -290,13 +293,13 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) u16 ultra = 0, multi = 0; u8 mode = 0, unit = drive->select.b.unit; unsigned long base = (unsigned long)hwif->hwif_data; - u8 scsc = 0, addr_mask = hwif->channel ? - (hwif->mmio ? 0xF4 : 0x84) : - (hwif->mmio ? 0xB4 : 0x80); + u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; + u8 scsc = 0, addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) + : (mmio ? 0xB4 : 0x80); unsigned long ma = siimage_seldev(drive, 0x08); unsigned long ua = siimage_seldev(drive, 0x0C); - scsc = sil_ioread8 (dev, base + (hwif->mmio ? 0x4A : 0x8A)); + scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A)); mode = sil_ioread8 (dev, base + addr_mask); multi = sil_ioread16(dev, ma); ultra = sil_ioread16(dev, ua); @@ -391,7 +394,7 @@ static int siimage_mmio_dma_test_irq(ide_drive_t *drive) static int siimage_dma_test_irq(ide_drive_t *drive) { - if (drive->hwif->mmio) + if (drive->hwif->host_flags & IDE_HFLAG_MMIO) return siimage_mmio_dma_test_irq(drive); else return siimage_io_dma_test_irq(drive); @@ -640,8 +643,6 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) hwif->irq = dev->irq; hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00); - - hwif->mmio = 1; } static int is_dev_seagate_sata(ide_drive_t *drive) diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 5171601fb255..abcfb1739d4d 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -87,7 +87,7 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d) unsigned long dma_base = 0; u8 dma_stat = 0; - if (hwif->mmio) + if (hwif->host_flags & IDE_HFLAG_MMIO) return hwif->dma_base; if (hwif->mate && hwif->mate->dma_base) { @@ -374,7 +374,7 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) if (base == 0 || ide_pci_set_master(dev, d->name) < 0) return -1; - if (hwif->mmio) + if (hwif->host_flags & IDE_HFLAG_MMIO) printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name); else printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n", diff --git a/include/linux/ide.h b/include/linux/ide.h index 56d0bc2dffee..b01b102be4de 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -532,7 +532,6 @@ typedef struct hwif_s { unsigned serialized : 1; /* serialized all channel operation */ unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */ unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */ - unsigned mmio : 1; /* host uses MMIO */ struct device gendev; struct device *portdev; -- cgit v1.2.3 From f8c4bd0ab2b8783c0f080957781e9f70bee48eaa Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:49 +0200 Subject: ide: pass 'hwif *' instead of 'drive *' to ->OUTBSYNC method There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 2 +- drivers/ide/ide-iops.c | 18 +++++++++--------- drivers/ide/ide-probe.c | 6 +++--- drivers/ide/ide-taskfile.c | 2 +- drivers/ide/pci/scc_pata.c | 5 +---- drivers/ide/ppc/pmac.c | 6 +++--- drivers/scsi/ide-scsi.c | 2 +- include/linux/ide.h | 2 +- 8 files changed, 20 insertions(+), 23 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 2083cc08b2ce..c28fcdf0ee9e 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -437,7 +437,7 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT)) /* force an abort */ - hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE, + hwif->OUTBSYNC(hwif, WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr); if (rq->errors >= ERROR_MAX) { diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 491980aab866..4c32cf0b623c 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -42,7 +42,7 @@ static void ide_outb (u8 val, unsigned long port) outb(val, port); } -static void ide_outbsync (ide_drive_t *drive, u8 addr, unsigned long port) +static void ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port) { outb(addr, port); } @@ -68,7 +68,7 @@ static void ide_mm_outb (u8 value, unsigned long port) writeb(value, (void __iomem *) port); } -static void ide_mm_outbsync (ide_drive_t *drive, u8 value, unsigned long port) +static void ide_mm_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port) { writeb(value, (void __iomem *) port); } @@ -686,7 +686,7 @@ int ide_driveid_update(ide_drive_t *drive) SELECT_MASK(drive, 1); ide_set_irq(drive, 0); msleep(50); - hwif->OUTBSYNC(drive, WIN_IDENTIFY, hwif->io_ports.command_addr); + hwif->OUTBSYNC(hwif, WIN_IDENTIFY, hwif->io_ports.command_addr); timeout = jiffies + WAIT_WORSTCASE; do { if (time_after(jiffies, timeout)) { @@ -773,7 +773,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) ide_set_irq(drive, 0); hwif->OUTB(speed, io_ports->nsect_addr); hwif->OUTB(SETFEATURES_XFER, io_ports->feature_addr); - hwif->OUTBSYNC(drive, WIN_SETFEATURES, io_ports->command_addr); + hwif->OUTBSYNC(hwif, WIN_SETFEATURES, io_ports->command_addr); if (drive->quirk_list == 2) ide_set_irq(drive, 1); @@ -881,7 +881,7 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler, spin_lock_irqsave(&ide_lock, flags); __ide_set_handler(drive, handler, timeout, expiry); - hwif->OUTBSYNC(drive, cmd, hwif->io_ports.command_addr); + hwif->OUTBSYNC(hwif, cmd, hwif->io_ports.command_addr); /* * Drive takes 400nS to respond, we must avoid the IRQ being * serviced before that. @@ -899,7 +899,7 @@ void ide_execute_pkt_cmd(ide_drive_t *drive) unsigned long flags; spin_lock_irqsave(&ide_lock, flags); - hwif->OUTBSYNC(drive, WIN_PACKETCMD, hwif->io_ports.command_addr); + hwif->OUTBSYNC(hwif, WIN_PACKETCMD, hwif->io_ports.command_addr); ndelay(400); spin_unlock_irqrestore(&ide_lock, flags); } @@ -1094,7 +1094,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) pre_reset(drive); SELECT_DRIVE(drive); udelay (20); - hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr); + hwif->OUTBSYNC(hwif, WIN_SRST, io_ports->command_addr); ndelay(400); hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; hwgroup->polling = 1; @@ -1125,14 +1125,14 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) * recover from reset very quickly, saving us the first 50ms wait time. */ /* set SRST and nIEN */ - hwif->OUTBSYNC(drive, drive->ctl|6, io_ports->ctl_addr); + hwif->OUTBSYNC(hwif, drive->ctl | 6, io_ports->ctl_addr); /* more than enough time */ udelay(10); if (drive->quirk_list == 2) ctl = drive->ctl; /* clear SRST and nIEN */ else ctl = drive->ctl | 2; /* clear SRST, leave nIEN */ - hwif->OUTBSYNC(drive, ctl, io_ports->ctl_addr); + hwif->OUTBSYNC(hwif, ctl, io_ports->ctl_addr); /* more than enough time */ udelay(10); hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 12513c45d700..b010633eb5ba 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -293,7 +293,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) hwif->OUTB(0, io_ports->feature_addr); /* ask drive for ID */ - hwif->OUTBSYNC(drive, cmd, io_ports->command_addr); + hwif->OUTBSYNC(hwif, cmd, hwif->io_ports.command_addr); timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; timeout += jiffies; @@ -480,7 +480,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) msleep(50); SELECT_DRIVE(drive); msleep(50); - hwif->OUTBSYNC(drive, WIN_SRST, io_ports->command_addr); + hwif->OUTBSYNC(hwif, WIN_SRST, io_ports->command_addr); (void)ide_busy_sleep(hwif); rc = try_to_identify(drive, cmd); } @@ -516,7 +516,7 @@ static void enable_nest (ide_drive_t *drive) printk("%s: enabling %s -- ", hwif->name, drive->id->model); SELECT_DRIVE(drive); msleep(50); - hwif->OUTBSYNC(drive, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr); + hwif->OUTBSYNC(hwif, EXABYTE_ENABLE_NEST, hwif->io_ports.command_addr); if (ide_busy_sleep(hwif)) { printk(KERN_CONT "failed (timeout)\n"); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 6a17ab54f801..cf55a48a7dd2 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -117,7 +117,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) switch (task->data_phase) { case TASKFILE_MULTI_OUT: case TASKFILE_OUT: - hwif->OUTBSYNC(drive, tf->command, hwif->io_ports.command_addr); + hwif->OUTBSYNC(hwif, tf->command, hwif->io_ports.command_addr); ndelay(400); /* FIXME */ return pre_task_out_intr(drive, task->rq); case TASKFILE_MULTI_IN: diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 133053c7a480..32eb0877fce2 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -148,11 +148,8 @@ static void scc_ide_outb(u8 addr, unsigned long port) out_be32((void*)port, addr); } -static void -scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port) +static void scc_ide_outbsync(ide_hwif_t *hwif, u8 addr, unsigned long port) { - ide_hwif_t *hwif = HWIF(drive); - out_be32((void*)port, addr); eieio(); in_be32((void*)(hwif->dma_base + 0x01c)); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index ba2d58727964..dcb2c466bb97 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -480,13 +480,13 @@ pmac_ide_do_update_timings(ide_drive_t *drive) pmac_ide_selectproc(drive); } -static void -pmac_outbsync(ide_drive_t *drive, u8 value, unsigned long port) +static void pmac_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port) { u32 tmp; writeb(value, (void __iomem *) port); - tmp = readl(PMAC_IDE_REG(IDE_TIMING_CONFIG)); + tmp = readl((void __iomem *)(hwif->io_ports.data_addr + + IDE_TIMING_CONFIG)); } /* diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 3222aa589dbf..d7fd5e550a25 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -257,7 +257,7 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT)) /* force an abort */ - hwif->OUTBSYNC(drive, WIN_IDLEIMMEDIATE, + hwif->OUTBSYNC(hwif, WIN_IDLEIMMEDIATE, hwif->io_ports.command_addr); rq->errors++; diff --git a/include/linux/ide.h b/include/linux/ide.h index b01b102be4de..1c3431469649 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -493,7 +493,7 @@ typedef struct hwif_s { void (*ide_dma_clear_irq)(ide_drive_t *drive); void (*OUTB)(u8 addr, unsigned long port); - void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port); + void (*OUTBSYNC)(struct hwif_s *hwif, u8 addr, unsigned long port); u8 (*INB)(unsigned long port); -- cgit v1.2.3 From 6a732e11be1355baeeca7c47f19ab20e7baa6ce7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:50 +0200 Subject: ide: use ->OUTBSYNC in init_irq() Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index b010633eb5ba..809362b13c99 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1065,7 +1065,7 @@ static int init_irq (ide_hwif_t *hwif) if (io_ports->ctl_addr) /* clear nIEN */ - hwif->OUTB(0x08, io_ports->ctl_addr); + hwif->OUTBSYNC(hwif, 0x08, io_ports->ctl_addr); if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup)) goto out_unlink; -- cgit v1.2.3 From 0fd04dcc2ebb6ec9088c24b368b0ce1f42a98ef5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:50 +0200 Subject: ide: use ->OUTBSYNC in ide_set_irq() Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/ide.h b/include/linux/ide.h index 1c3431469649..4d1c9714f1d9 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1340,7 +1340,8 @@ static inline void ide_set_irq(ide_drive_t *drive, int on) { ide_hwif_t *hwif = drive->hwif; - hwif->OUTB(drive->ctl | (on ? 0 : 2), hwif->io_ports.ctl_addr); + hwif->OUTBSYNC(hwif, drive->ctl | (on ? 0 : 2), + hwif->io_ports.ctl_addr); } static inline u8 ide_read_status(ide_drive_t *drive) -- cgit v1.2.3 From ff07488346702f554aaeb6aae982540aa0302373 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:50 +0200 Subject: ide: remove drive->ctl Remove drive->ctl (it is always equal to 0x08 after init time). While at it: * Use ATA_DEVCTL_OBS define. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/h8300/ide-h8300.c | 4 ++-- drivers/ide/ide-iops.c | 10 +++++----- drivers/ide/ide-probe.c | 2 +- drivers/ide/ide.c | 1 - drivers/ide/pci/hpt366.c | 3 +-- drivers/ide/pci/ns87415.c | 4 ++-- drivers/ide/pci/scc_pata.c | 4 ++-- drivers/ide/pci/sgiioc4.c | 2 +- include/linux/ide.h | 3 +-- 9 files changed, 15 insertions(+), 18 deletions(-) diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index d5afc28eaae7..ae37ee58bae2 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -96,7 +96,7 @@ static void h8300_tf_read(ide_drive_t *drive, ide_task_t *task) } /* be sure we're looking at the low order bits */ - outb(drive->ctl & ~0x80, io_ports->ctl_addr); + outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_NSECT) tf->nsect = inb(io_ports->nsect_addr); @@ -110,7 +110,7 @@ static void h8300_tf_read(ide_drive_t *drive, ide_task_t *task) tf->device = inb(io_ports->device_addr); if (task->tf_flags & IDE_TFLAG_LBA48) { - outb(drive->ctl | 0x80, io_ports->ctl_addr); + outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) tf->hob_feature = inb(io_ports->feature_addr); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 4c32cf0b623c..80ad4f234f3f 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -186,7 +186,7 @@ static void ide_tf_read(ide_drive_t *drive, ide_task_t *task) } /* be sure we're looking at the low order bits */ - tf_outb(drive->ctl & ~0x80, io_ports->ctl_addr); + tf_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_NSECT) tf->nsect = tf_inb(io_ports->nsect_addr); @@ -200,7 +200,7 @@ static void ide_tf_read(ide_drive_t *drive, ide_task_t *task) tf->device = tf_inb(io_ports->device_addr); if (task->tf_flags & IDE_TFLAG_LBA48) { - tf_outb(drive->ctl | 0x80, io_ports->ctl_addr); + tf_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) tf->hob_feature = tf_inb(io_ports->feature_addr); @@ -1125,13 +1125,13 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) * recover from reset very quickly, saving us the first 50ms wait time. */ /* set SRST and nIEN */ - hwif->OUTBSYNC(hwif, drive->ctl | 6, io_ports->ctl_addr); + hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | 6, io_ports->ctl_addr); /* more than enough time */ udelay(10); if (drive->quirk_list == 2) - ctl = drive->ctl; /* clear SRST and nIEN */ + ctl = ATA_DEVCTL_OBS; /* clear SRST and nIEN */ else - ctl = drive->ctl | 2; /* clear SRST, leave nIEN */ + ctl = ATA_DEVCTL_OBS | 2; /* clear SRST, leave nIEN */ hwif->OUTBSYNC(hwif, ctl, io_ports->ctl_addr); /* more than enough time */ udelay(10); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 809362b13c99..d21e51a02c3e 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1065,7 +1065,7 @@ static int init_irq (ide_hwif_t *hwif) if (io_ports->ctl_addr) /* clear nIEN */ - hwif->OUTBSYNC(hwif, 0x08, io_ports->ctl_addr); + hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS, io_ports->ctl_addr); if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup)) goto out_unlink; diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 1defba3eefe7..2b8453510e09 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -136,7 +136,6 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif) drive->media = ide_disk; drive->select.all = (unit<<4)|0xa0; drive->hwif = hwif; - drive->ctl = 0x08; drive->ready_stat = READY_STAT; drive->bad_wstat = BAD_W_STAT; drive->special.b.recalibrate = 1; diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index c929dadaaaff..397c6cbe953c 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -759,8 +759,7 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask) enable_irq (hwif->irq); } } else - outb(mask ? (drive->ctl | 2) : (drive->ctl & ~2), - hwif->io_ports.ctl_addr); + outb(ATA_DEVCTL_OBS | (mask ? 2 : 0), hwif->io_ports.ctl_addr); } /* diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c index a7a41bb82778..45ba71a7182f 100644 --- a/drivers/ide/pci/ns87415.c +++ b/drivers/ide/pci/ns87415.c @@ -76,7 +76,7 @@ static void superio_tf_read(ide_drive_t *drive, ide_task_t *task) } /* be sure we're looking at the low order bits */ - outb(drive->ctl & ~0x80, io_ports->ctl_addr); + outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_NSECT) tf->nsect = inb(io_ports->nsect_addr); @@ -90,7 +90,7 @@ static void superio_tf_read(ide_drive_t *drive, ide_task_t *task) tf->device = superio_ide_inb(io_ports->device_addr); if (task->tf_flags & IDE_TFLAG_LBA48) { - outb(drive->ctl | 0x80, io_ports->ctl_addr); + outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) tf->hob_feature = inb(io_ports->feature_addr); diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 32eb0877fce2..1584ebb6a185 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -703,7 +703,7 @@ static void scc_tf_read(ide_drive_t *drive, ide_task_t *task) } /* be sure we're looking at the low order bits */ - scc_ide_outb(drive->ctl & ~0x80, io_ports->ctl_addr); + scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_NSECT) tf->nsect = scc_ide_inb(io_ports->nsect_addr); @@ -717,7 +717,7 @@ static void scc_tf_read(ide_drive_t *drive, ide_task_t *task) tf->device = scc_ide_inb(io_ports->device_addr); if (task->tf_flags & IDE_TFLAG_LBA48) { - scc_ide_outb(drive->ctl | 0x80, io_ports->ctl_addr); + scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr); if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE) tf->hob_feature = scc_ide_inb(io_ports->feature_addr); diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index c1b667c53f2b..24513e3dcd6b 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -111,7 +111,7 @@ sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, static void sgiioc4_maskproc(ide_drive_t * drive, int mask) { - writeb(mask ? (drive->ctl | 2) : (drive->ctl & ~2), + writeb(ATA_DEVCTL_OBS | (mask ? 2 : 0), (void __iomem *)drive->hwif->io_ports.ctl_addr); } diff --git a/include/linux/ide.h b/include/linux/ide.h index 4d1c9714f1d9..d8c86f0362c4 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -364,7 +364,6 @@ typedef struct ide_drive_s { u8 wcache; /* status of write cache */ u8 acoustic; /* acoustic management */ u8 media; /* disk, cdrom, tape, floppy, ... */ - u8 ctl; /* "normal" value for Control register */ u8 ready_stat; /* min status value for drive ready */ u8 mult_count; /* current multiple sector setting */ u8 mult_req; /* requested multiple sector setting */ @@ -1340,7 +1339,7 @@ static inline void ide_set_irq(ide_drive_t *drive, int on) { ide_hwif_t *hwif = drive->hwif; - hwif->OUTBSYNC(hwif, drive->ctl | (on ? 0 : 2), + hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | (on ? 0 : 2), hwif->io_ports.ctl_addr); } -- cgit v1.2.3 From 7e12ca11d65f4cb29ed58ea3948f8c5d4f57b35e Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:50 +0200 Subject: ide-scsi: replace ide_do_drive_cmd with blk_execute_rq_nowait All the callers of ide_do_drive_cmd() except for ide-scsi use ide_preempt action argument. This converts ide-scsi to use blk_execute_rq_nowait instead of ide_do_drive_cmd so that we can remove the action argument in ide_do_drive_cmd and ide_action_t typedef. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index d7fd5e550a25..58e30efe7a74 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -790,8 +790,7 @@ static int idescsi_queue (struct scsi_cmnd *cmd, rq->special = (char *) pc; rq->cmd_type = REQ_TYPE_SPECIAL; spin_unlock_irq(host->host_lock); - rq->rq_disk = scsi->disk; - (void) ide_do_drive_cmd (drive, rq, ide_end); + blk_execute_rq_nowait(drive->queue, scsi->disk, rq, 0, NULL); spin_lock_irq(host->host_lock); return 0; abort: -- cgit v1.2.3 From 63f5abb0959337db0d5bece9cefba03cdcadec51 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 15 Jul 2008 21:21:51 +0200 Subject: ide: remove action argument in ide_do_drive_cmd ide_do_drive_cmd is called only with ide_preempt action argument. So we can remove the action argument in ide_do_drive_cmd and ide_action_t typedef. This patch also includes two minor cleanups: 1) ide_do_drive_cmd always succeeds so we don't need the return value; 2) the callers use blk_rq_init before ide_do_drive_cmd so there is no need to initialize rq->errors. Signed-off-by: FUJITA Tomonori Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 2 +- drivers/ide/ide-floppy.c | 2 +- drivers/ide/ide-io.c | 40 +++++++++------------------------------- drivers/ide/ide-tape.c | 2 +- drivers/scsi/ide-scsi.c | 3 ++- include/linux/ide.h | 12 +----------- 6 files changed, 15 insertions(+), 46 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 0fbc2d8d0d53..043129c422fe 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -213,7 +213,7 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense, /* NOTE! Save the failed command in "rq->buffer" */ rq->buffer = (void *) failed_command; - (void) ide_do_drive_cmd(drive, rq, ide_preempt); + ide_do_drive_cmd(drive, rq); } static void cdrom_end_request(ide_drive_t *drive, int uptodate) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 1852008d9ee4..53209a473937 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -291,7 +291,7 @@ static void idefloppy_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_flags |= REQ_PREEMPT; rq->rq_disk = floppy->disk; - (void) ide_do_drive_cmd(drive, rq, ide_preempt); + ide_do_drive_cmd(drive, rq); } static struct ide_atapi_pc *idefloppy_next_pc_storage(ide_drive_t *drive) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index c28fcdf0ee9e..28057747c1f8 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -1520,49 +1520,27 @@ irqreturn_t ide_intr (int irq, void *dev_id) * ide_do_drive_cmd - issue IDE special command * @drive: device to issue command * @rq: request to issue - * @action: action for processing * * This function issues a special IDE device request * onto the request queue. * - * If action is ide_wait, then the rq is queued at the end of the - * request queue, and the function sleeps until it has been processed. - * This is for use when invoked from an ioctl handler. - * - * If action is ide_preempt, then the rq is queued at the head of - * the request queue, displacing the currently-being-processed - * request and this function returns immediately without waiting - * for the new rq to be completed. This is VERY DANGEROUS, and is - * intended for careful use by the ATAPI tape/cdrom driver code. - * - * If action is ide_end, then the rq is queued at the end of the - * request queue, and the function returns immediately without waiting - * for the new rq to be completed. This is again intended for careful - * use by the ATAPI tape/cdrom driver code. + * the rq is queued at the head of the request queue, displacing + * the currently-being-processed request and this function + * returns immediately without waiting for the new rq to be + * completed. This is VERY DANGEROUS, and is intended for + * careful use by the ATAPI tape/cdrom driver code. */ - -int ide_do_drive_cmd (ide_drive_t *drive, struct request *rq, ide_action_t action) + +void ide_do_drive_cmd(ide_drive_t *drive, struct request *rq) { unsigned long flags; ide_hwgroup_t *hwgroup = HWGROUP(drive); - int where = ELEVATOR_INSERT_BACK; - - rq->errors = 0; - - if (action == ide_preempt) - where = ELEVATOR_INSERT_FRONT; spin_lock_irqsave(&ide_lock, flags); - if (action == ide_preempt) - hwgroup->rq = NULL; - __elv_add_request(drive->queue, rq, where, 1); + hwgroup->rq = NULL; + __elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 1); __generic_unplug_device(drive->queue); - /* the queue is stopped so it won't be plugged+unplugged */ - if (blk_pm_resume_request(rq)) - do_ide_request(drive->queue); spin_unlock_irqrestore(&ide_lock, flags); - - return 0; } EXPORT_SYMBOL(ide_do_drive_cmd); diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index cc7991c7c252..a562df820777 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -691,7 +691,7 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, rq->cmd_flags |= REQ_PREEMPT; rq->buffer = (char *) pc; rq->rq_disk = tape->disk; - (void) ide_do_drive_cmd(drive, rq, ide_preempt); + ide_do_drive_cmd(drive, rq); } /* diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 58e30efe7a74..569ffde6d047 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -245,7 +245,8 @@ static int idescsi_check_condition(ide_drive_t *drive, ide_scsi_hex_dump(pc->c, 6); } rq->rq_disk = scsi->disk; - return ide_do_drive_cmd(drive, rq, ide_preempt); + ide_do_drive_cmd(drive, rq); + return 0; } static int idescsi_end_request(ide_drive_t *, int, int); diff --git a/include/linux/ide.h b/include/linux/ide.h index d8c86f0362c4..04267dc1edf2 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -851,17 +851,7 @@ int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long); extern ide_startstop_t ide_do_reset (ide_drive_t *); -/* - * "action" parameter type for ide_do_drive_cmd() below. - */ -typedef enum { - ide_wait, /* insert rq at end of list, and wait for it */ - ide_preempt, /* insert rq in front of current request */ - ide_head_wait, /* insert rq in front of current request and wait for it */ - ide_end /* insert rq at end of list, but don't wait for it */ -} ide_action_t; - -extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t); +extern void ide_do_drive_cmd(ide_drive_t *, struct request *); extern void ide_end_drive_cmd(ide_drive_t *, u8, u8); -- cgit v1.2.3 From b3d96afccf8b5c67b66a61efb88c53ff029c6611 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:51 +0200 Subject: ide-scsi: fix race in idescsi_transfer_pc() Start DMA engine before sending content of packet command (otherwise it is possible that IRQ will happen before DMA engine is started). Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 569ffde6d047..2553ef4d5a91 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -494,13 +494,14 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) /* Set the interrupt routine */ ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); - /* Send the actual packet */ - hwif->output_data(drive, NULL, scsi->pc->c, 12); - if (pc->flags & PC_FLAG_DMA_OK) { pc->flags |= PC_FLAG_DMA_IN_PROGRESS; hwif->dma_ops->dma_start(drive); } + + /* Send the actual packet */ + hwif->output_data(drive, NULL, scsi->pc->c, 12); + return ide_started; } -- cgit v1.2.3 From e8e25f03e19c2c47834c821511625c0b80567827 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:51 +0200 Subject: ide-scsi: fix DRQ checking for DMA transfers in idescsi_pc_intr() If DRQ bit of Status Register is not cleared it is an error condition and should be handled accordingly (disable DMA + reset the device). Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 2553ef4d5a91..e67cf8aa9462 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -388,7 +388,6 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) return ide_stopped; } if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; #if IDESCSI_DEBUG_LOG printk ("ide-scsi: %s: DMA complete\n", drive->name); #endif /* IDESCSI_DEBUG_LOG */ @@ -404,12 +403,20 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) printk(KERN_INFO "Packet command completed, %d bytes" " transferred\n", pc->xferred); + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); if (stat & ERR_STAT) rq->errors++; idescsi_end_request (drive, 1, 0); return ide_stopped; } + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; + printk(KERN_ERR "%s: The device wants to issue more interrupts " + "in DMA mode\n", drive->name); + ide_dma_off(drive); + return ide_do_reset(drive); + } bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | hwif->INB(hwif->io_ports.lbam_addr); ireason = hwif->INB(hwif->io_ports.nsect_addr); -- cgit v1.2.3 From c04bbc812b05b304a9118687d0e0a47e35f00d1d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:51 +0200 Subject: ide-scsi: fix handling of DMA errors in idescsi_pc_intr() Check return value of ->dma_end method and if there was a DMA error handle it accordingly (set PC_FLAG_DMA_ERROR pc flag, don't update pc->xferred and increase rq->errors). Also move debug message in the right place while at it. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index e67cf8aa9462..ed92cf7a7682 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -388,11 +388,13 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) return ide_stopped; } if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + if (hwif->dma_ops->dma_end(drive)) + pc->flags |= PC_FLAG_DMA_ERROR; + else + pc->xferred = pc->req_xfer; #if IDESCSI_DEBUG_LOG printk ("ide-scsi: %s: DMA complete\n", drive->name); #endif /* IDESCSI_DEBUG_LOG */ - pc->xferred = pc->req_xfer; - (void)hwif->dma_ops->dma_end(drive); } /* Clear the interrupt */ @@ -405,7 +407,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) " transferred\n", pc->xferred); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); - if (stat & ERR_STAT) + if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) rq->errors++; idescsi_end_request (drive, 1, 0); return ide_stopped; -- cgit v1.2.3 From 6c60bd8ea7aa536d67830bc8384ef0ebdfb8aad4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:52 +0200 Subject: ide-scsi: fix Interrupt Reason checking in idescsi_pc_intr() Set PC_FLAG_WRITING pc flag in idescsi_queue() (if needed) and then fix Interrupt Reason checking in idescsi_pc_intr(). Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index ed92cf7a7682..08807070e083 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -427,7 +427,15 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n"); return ide_do_reset (drive); } - if (ireason & IO) { + if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { + /* Hopefully, we will never get here */ + printk(KERN_ERR "%s: We wanted to %s, but the device wants us " + "to %s!\n", drive->name, + (ireason & IO) ? "Write" : "Read", + (ireason & IO) ? "Read" : "Write"); + return ide_do_reset(drive); + } + if (!(pc->flags & PC_FLAG_WRITING)) { temp = pc->xferred + bcount; if (temp > pc->req_xfer) { if (temp > pc->buf_size) { @@ -436,7 +444,6 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) "- discarding data\n"); temp = pc->buf_size - pc->xferred; if (temp) { - pc->flags &= ~PC_FLAG_WRITING; if (pc->sg) idescsi_input_buffers(drive, pc, temp); @@ -457,15 +464,11 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) printk (KERN_NOTICE "ide-scsi: The scsi wants to send us more data than expected - allowing transfer\n"); #endif /* IDESCSI_DEBUG_LOG */ } - } - if (ireason & IO) { - pc->flags &= ~PC_FLAG_WRITING; if (pc->sg) idescsi_input_buffers(drive, pc, bcount); else hwif->input_data(drive, NULL, pc->cur_pos, bcount); } else { - pc->flags |= PC_FLAG_WRITING; if (pc->sg) idescsi_output_buffers(drive, pc, bcount); else @@ -777,6 +780,8 @@ static int idescsi_queue (struct scsi_cmnd *cmd, memset (pc->c, 0, 12); pc->flags = 0; + if (cmd->sc_data_direction == DMA_TO_DEVICE) + pc->flags |= PC_FLAG_WRITING; pc->rq = rq; memcpy (pc->c, cmd->cmnd, cmd->cmd_len); pc->buf = NULL; -- cgit v1.2.3 From 3e52fb4d1f4cc9630422982b6c5fa571e30f9889 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:52 +0200 Subject: ide-scsi: merge idescsi_input_buffers() and idescsi_output_buffers() * Merge idescsi_input_buffers() and idescsi_output_buffers() into ide_scsi_io_buffers() helper. While at it: * Log device name instead of driver name on error. * Use xfer_func_t. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 81 +++++++++++++++---------------------------------- 1 file changed, 24 insertions(+), 57 deletions(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 08807070e083..36c2c3bf111d 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -129,51 +129,15 @@ static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive) #define IDESCSI_PC_RQ 90 /* - * PIO data transfer routines using the scatter gather table. + * PIO data transfer routine using the scatter gather table. */ -static void idescsi_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) +static void ide_scsi_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, + unsigned int bcount, int write) { ide_hwif_t *hwif = drive->hwif; - int count; + xfer_func_t *xf = write ? hwif->output_data : hwif->input_data; char *buf; - - while (bcount) { - count = min(pc->sg->length - pc->b_count, bcount); - if (PageHighMem(sg_page(pc->sg))) { - unsigned long flags; - - local_irq_save(flags); - buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) + - pc->sg->offset; - hwif->input_data(drive, NULL, buf + pc->b_count, count); - kunmap_atomic(buf - pc->sg->offset, KM_IRQ0); - local_irq_restore(flags); - } else { - buf = sg_virt(pc->sg); - hwif->input_data(drive, NULL, buf + pc->b_count, count); - } - bcount -= count; pc->b_count += count; - if (pc->b_count == pc->sg->length) { - if (!--pc->sg_cnt) - break; - pc->sg = sg_next(pc->sg); - pc->b_count = 0; - } - } - - if (bcount) { - printk (KERN_ERR "ide-scsi: scatter gather table too small, discarding data\n"); - ide_pad_transfer(drive, 0, bcount); - } -} - -static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, - unsigned int bcount) -{ - ide_hwif_t *hwif = drive->hwif; int count; - char *buf; while (bcount) { count = min(pc->sg->length - pc->b_count, bcount); @@ -182,13 +146,13 @@ static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, local_irq_save(flags); buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) + - pc->sg->offset; - hwif->output_data(drive, NULL, buf + pc->b_count, count); + pc->sg->offset; + xf(drive, NULL, buf + pc->b_count, count); kunmap_atomic(buf - pc->sg->offset, KM_IRQ0); local_irq_restore(flags); } else { buf = sg_virt(pc->sg); - hwif->output_data(drive, NULL, buf + pc->b_count, count); + xf(drive, NULL, buf + pc->b_count, count); } bcount -= count; pc->b_count += count; if (pc->b_count == pc->sg->length) { @@ -200,8 +164,10 @@ static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, } if (bcount) { - printk (KERN_ERR "ide-scsi: scatter gather table too small, padding with zeros\n"); - ide_pad_transfer(drive, 1, bcount); + printk(KERN_ERR "%s: scatter gather table too small, %s\n", + drive->name, write ? "padding with zeros" + : "discarding data"); + ide_pad_transfer(drive, write, bcount); } } @@ -370,6 +336,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; struct ide_atapi_pc *pc = scsi->pc; struct request *rq = pc->rq; + xfer_func_t *xferfunc; unsigned int temp; u16 bcount; u8 stat, ireason; @@ -445,8 +412,8 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) temp = pc->buf_size - pc->xferred; if (temp) { if (pc->sg) - idescsi_input_buffers(drive, pc, - temp); + ide_scsi_io_buffers(drive, pc, + temp, 0); else hwif->input_data(drive, NULL, pc->cur_pos, temp); @@ -464,16 +431,16 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) printk (KERN_NOTICE "ide-scsi: The scsi wants to send us more data than expected - allowing transfer\n"); #endif /* IDESCSI_DEBUG_LOG */ } - if (pc->sg) - idescsi_input_buffers(drive, pc, bcount); - else - hwif->input_data(drive, NULL, pc->cur_pos, bcount); - } else { - if (pc->sg) - idescsi_output_buffers(drive, pc, bcount); - else - hwif->output_data(drive, NULL, pc->cur_pos, bcount); - } + xferfunc = hwif->input_data; + } else + xferfunc = hwif->output_data; + + if (pc->sg) + ide_scsi_io_buffers(drive, pc, bcount, + !!(pc->flags & PC_FLAG_WRITING)); + else + xferfunc(drive, NULL, pc->cur_pos, bcount); + /* Update the current position */ pc->xferred += bcount; pc->cur_pos += bcount; -- cgit v1.2.3 From c8c51129805c0efb32f34afd3af8fe94f5757363 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:52 +0200 Subject: ide-scsi: remove superfluous BUG_ON() from idescsi_transfer_pc() ide_set_handler() bugs on ->handler == NULL so no need to do it in idescsi_transfer_pc(). There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 36c2c3bf111d..e9d3dbf596c7 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -469,7 +469,7 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) "issuing a packet command\n"); return ide_do_reset (drive); } - BUG_ON(HWGROUP(drive)->handler != NULL); + /* Set the interrupt routine */ ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); -- cgit v1.2.3 From 43a2b5b29385a3e0997a47c86f286d3645e5cb44 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:52 +0200 Subject: ide-scsi: add debug_log() macro Add debug_log() macro and convert the driver to use it. [ This makes debug messages to be always prefixed with "ide-scsi: " and use KERN_INFO level. ] While at it: * Change "DMA complete" debug message to "DMA finished" to match other ATAPI device drivers. * Use __func__. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 51 ++++++++++++++++++++++++------------------------- 1 file changed, 25 insertions(+), 26 deletions(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index e9d3dbf596c7..d2dad9039e0d 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -60,6 +60,13 @@ #define IDESCSI_DEBUG_LOG 0 +#if IDESCSI_DEBUG_LOG +#define debug_log(fmt, args...) \ + printk(KERN_INFO "ide-scsi: " fmt, ## args) +#else +#define debug_log(fmt, args...) do {} while (0) +#endif + /* * SCSI command transformation layer */ @@ -237,10 +244,9 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) static ide_startstop_t idescsi_atapi_abort(ide_drive_t *drive, struct request *rq) { -#if IDESCSI_DEBUG_LOG - printk(KERN_WARNING "idescsi_atapi_abort called for %lu\n", + debug_log("%s called for %lu\n", __func__, ((struct ide_atapi_pc *) rq->special)->scsi_cmd->serial_number); -#endif + rq->errors |= ERROR_MAX; idescsi_end_request(drive, 0, 0); @@ -319,9 +325,9 @@ static int idescsi_expiry(ide_drive_t *drive) idescsi_scsi_t *scsi = drive_to_idescsi(drive); struct ide_atapi_pc *pc = scsi->pc; -#if IDESCSI_DEBUG_LOG - printk(KERN_WARNING "idescsi_expiry called for %lu at %lu\n", pc->scsi_cmd->serial_number, jiffies); -#endif + debug_log("%s called for %lu at %lu\n", __func__, + pc->scsi_cmd->serial_number, jiffies); + pc->flags |= PC_FLAG_TIMEDOUT; return 0; /* we do not want the ide subsystem to retry */ @@ -341,15 +347,11 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) u16 bcount; u8 stat, ireason; -#if IDESCSI_DEBUG_LOG - printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n"); -#endif /* IDESCSI_DEBUG_LOG */ + debug_log("Reached %s interrupt handler\n", __func__); if (pc->flags & PC_FLAG_TIMEDOUT) { -#if IDESCSI_DEBUG_LOG - printk(KERN_WARNING "idescsi_pc_intr: got timed out packet %lu at %lu\n", - pc->scsi_cmd->serial_number, jiffies); -#endif + debug_log("%s: got timed out packet %lu at %lu\n", __func__, + pc->scsi_cmd->serial_number, jiffies); /* end this request now - scsi should retry it*/ idescsi_end_request (drive, 1, 0); return ide_stopped; @@ -359,9 +361,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) pc->flags |= PC_FLAG_DMA_ERROR; else pc->xferred = pc->req_xfer; -#if IDESCSI_DEBUG_LOG - printk ("ide-scsi: %s: DMA complete\n", drive->name); -#endif /* IDESCSI_DEBUG_LOG */ + debug_log("%s: DMA finished\n", drive->name); } /* Clear the interrupt */ @@ -427,9 +427,8 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); return ide_started; } -#if IDESCSI_DEBUG_LOG - printk (KERN_NOTICE "ide-scsi: The scsi wants to send us more data than expected - allowing transfer\n"); -#endif /* IDESCSI_DEBUG_LOG */ + debug_log("The scsi wants to send us more data than " + "expected - allowing transfer\n"); } xferfunc = hwif->input_data; } else @@ -566,10 +565,10 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, */ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *rq, sector_t block) { -#if IDESCSI_DEBUG_LOG - printk (KERN_INFO "dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name,rq->cmd[0],rq->errors); - printk (KERN_INFO "sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",rq->sector,rq->nr_sectors,rq->current_nr_sectors); -#endif /* IDESCSI_DEBUG_LOG */ + debug_log("dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name, + rq->cmd[0], rq->errors); + debug_log("sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n", + rq->sector, rq->nr_sectors, rq->current_nr_sectors); if (blk_sense_request(rq) || blk_special_request(rq)) { return idescsi_issue_pc(drive, @@ -976,10 +975,10 @@ static int ide_scsi_probe(ide_drive_t *drive) host->max_id = 1; -#if IDESCSI_DEBUG_LOG if (drive->id->last_lun) - printk(KERN_NOTICE "%s: id->last_lun=%u\n", drive->name, drive->id->last_lun); -#endif + debug_log("%s: id->last_lun=%u\n", drive->name, + drive->id->last_lun); + if ((drive->id->last_lun & 0x7) != 7) host->max_lun = (drive->id->last_lun & 0x7) + 1; else -- cgit v1.2.3 From 87429bdc2e0701fa33a455297de01e79797b4210 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:53 +0200 Subject: ide-tape: idetape_pc_intr() should use local_irq_enable_in_hardirq() Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index a562df820777..58c5a5a98858 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -794,7 +794,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) " transferred\n", pc->xferred); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - local_irq_enable(); + local_irq_enable_in_hardirq(); #if SIMULATE_ERRORS if ((pc->c[0] == WRITE_6 || pc->c[0] == READ_6) && -- cgit v1.2.3 From 1e049a8ea190b7cc22320c7797b36b2c6128c9c5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:53 +0200 Subject: ide-tape: remove superfluous error message from idetape_pc_intr() ide_dma_off() prints info about DMA being disabled. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 58c5a5a98858..92fadd5a5f8a 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -842,7 +842,6 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; printk(KERN_ERR "ide-tape: The tape wants to issue more " "interrupts in DMA mode\n"); - printk(KERN_ERR "ide-tape: DMA disabled, reverting to PIO\n"); ide_dma_off(drive); return ide_do_reset(drive); } -- cgit v1.2.3 From 6bd3b0bfb8fccdcce3b8524d6761e0a3ab6e23f0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:53 +0200 Subject: ide-tape: remove superfluous warning message from idetape_issue_pc() ide_dma_off() prints info about DMA being disabled. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 92fadd5a5f8a..5aa7e2dbaa0c 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1038,8 +1038,6 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, if (pc->flags & PC_FLAG_DMA_ERROR) { pc->flags &= ~PC_FLAG_DMA_ERROR; - printk(KERN_WARNING "ide-tape: DMA disabled, " - "reverting to PIO\n"); ide_dma_off(drive); } if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) -- cgit v1.2.3 From 91395a16309596c2e78439aa5f9f6004f0365ef9 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:54 +0200 Subject: ide-tape: remove unneeded CONFIG_BLK_DEV_IDEDMA ifdef PC_FLAG_DMA_IN_PROGRESS flag is never set if DMA support is disabled. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 5aa7e2dbaa0c..b8cc0d5cde0e 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -973,11 +973,11 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) } /* Set the interrupt routine */ ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); -#ifdef CONFIG_BLK_DEV_IDEDMA + /* Begin DMA, if necessary */ if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) hwif->dma_ops->dma_start(drive); -#endif + /* Send the actual packet */ hwif->output_data(drive, NULL, pc->c, 12); -- cgit v1.2.3 From 531e9e50543ebf562237b8ac64529ae09b344a43 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:54 +0200 Subject: ide-tape: remove stale comments from idetape_pc_intr() Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 21 --------------------- 1 file changed, 21 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b8cc0d5cde0e..41aa8b3ccab3 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -758,27 +758,6 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { if (hwif->dma_ops->dma_end(drive) || (stat & ERR_STAT)) { - /* - * A DMA error is sometimes expected. For example, - * if the tape is crossing a filemark during a - * READ command, it will issue an irq and position - * itself before the filemark, so that only a partial - * data transfer will occur (which causes the DMA - * error). In that case, we will later ask the tape - * how much bytes of the original request were - * actually transferred (we can't receive that - * information from the DMA engine on most chipsets). - */ - - /* - * On the contrary, a DMA error is never expected; - * it usually indicates a hardware error or abort. - * If the tape crosses a filemark during a READ - * command, it will issue an irq and position itself - * after the filemark (not before). Only a partial - * data transfer will occur, but no DMA error. - * (AS, 19 Apr 2001) - */ pc->flags |= PC_FLAG_DMA_ERROR; } else { pc->xferred = pc->req_xfer; -- cgit v1.2.3 From 170ee569bbe1005baebf2e9e4c3f4622d14ec851 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:54 +0200 Subject: ide-tape: remove SIMULATE_ERRORS debug code Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 41aa8b3ccab3..cc70e759fc8e 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -144,9 +144,6 @@ enum { /*************************** End of tunable parameters ***********************/ -/* Read/Write error simulation */ -#define SIMULATE_ERRORS 0 - /* tape directions */ enum { IDETAPE_DIR_NONE = (1 << 0), @@ -745,9 +742,6 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) xfer_func_t *xferfunc; idetape_io_buf *iobuf; unsigned int temp; -#if SIMULATE_ERRORS - static int error_sim_count; -#endif u16 bcount; u8 stat, ireason; @@ -775,14 +769,6 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); -#if SIMULATE_ERRORS - if ((pc->c[0] == WRITE_6 || pc->c[0] == READ_6) && - (++error_sim_count % 100) == 0) { - printk(KERN_INFO "ide-tape: %s: simulating error\n", - tape->name); - stat |= ERR_STAT; - } -#endif if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE) stat &= ~ERR_STAT; if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { -- cgit v1.2.3 From 0b2eea4c5594ceaf13c57eaff7ff226263f1c36f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:54 +0200 Subject: ide-floppy: merge idefloppy_transfer_pc() and idefloppy_transfer_pc1() * Check IDEFLOPPY_FLAG_ZIP_DRIVE flag in idefloppy_transfer_pc1() and skip idefloppy_transfer_pc2()-phase if the flag is not set. * Always use idefloppy_transfer_pc1() in idefloppy_issue_pc() and remove no longer needed idefloppy_transfer_pc(). There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 65 +++++++++++++----------------------------------- 1 file changed, 17 insertions(+), 48 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 53209a473937..8dbb340dbfc0 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -521,40 +521,6 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) return ide_started; } -/* - * This is the original routine that did the packet transfer. - * It fails at high speeds on the Iomega ZIP drive, so there's a slower version - * for that drive below. The algorithm is chosen based on drive type - */ -static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - ide_startstop_t startstop; - idefloppy_floppy_t *floppy = drive->driver_data; - u8 ireason; - - if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "ide-floppy: Strange, packet command " - "initiated yet DRQ isn't asserted\n"); - return startstop; - } - ireason = hwif->INB(hwif->io_ports.nsect_addr); - if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) while " - "issuing a packet command\n"); - return ide_do_reset(drive); - } - - /* Set the interrupt routine */ - ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); - - /* Send the actual packet */ - hwif->output_data(drive, NULL, floppy->pc->c, 12); - - return ide_started; -} - - /* * What we have here is a classic case of a top half / bottom half interrupt * service routine. In interrupt mode, the device sends an interrupt to signal @@ -580,6 +546,8 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; idefloppy_floppy_t *floppy = drive->driver_data; + ide_expiry_t *expiry; + unsigned int timeout; ide_startstop_t startstop; u8 ireason; @@ -602,9 +570,20 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) * 40 and 50msec work well. idefloppy_pc_intr will not be actually * used until after the packet is moved in about 50 msec. */ + if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) { + timeout = floppy->ticks; + expiry = &idefloppy_transfer_pc2; + } else { + timeout = IDEFLOPPY_WAIT_CMD; + expiry = NULL; + } + + ide_set_handler(drive, &idefloppy_pc_intr, timeout, expiry); + + if ((floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) == 0) + /* Send the actual packet */ + hwif->output_data(drive, NULL, floppy->pc->c, 12); - ide_set_handler(drive, &idefloppy_pc_intr, floppy->ticks, - &idefloppy_transfer_pc2); return ide_started; } @@ -629,7 +608,6 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - ide_handler_t *pkt_xfer_routine; u16 bcount; u8 dma; @@ -675,26 +653,17 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, hwif->dma_ops->dma_start(drive); } - /* Can we transfer the packet when we get the interrupt or wait? */ - if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) { - /* wait */ - pkt_xfer_routine = &idefloppy_transfer_pc1; - } else { - /* immediate */ - pkt_xfer_routine = &idefloppy_transfer_pc; - } - if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) { /* Issue the packet command */ ide_execute_command(drive, WIN_PACKETCMD, - pkt_xfer_routine, + &idefloppy_transfer_pc1, IDEFLOPPY_WAIT_CMD, NULL); return ide_started; } else { /* Issue the packet command */ ide_execute_pkt_cmd(drive); - return (*pkt_xfer_routine) (drive); + return idefloppy_transfer_pc1(drive); } } -- cgit v1.2.3 From 568ca92774d2f6be4a7e2f8357559bfdc9424056 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:54 +0200 Subject: ide-{floppy,tape,scsi}: log device name instead of driver name Log device name instead of driver name in *_pc_intr() and *_transfer_pc*(). While at it: * Merge two consecutive printk()-s in *_pc_intr() together. * Replace "floppy"/"tape"/"scsi" references in printk()-s by "device". Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 35 ++++++++++++++++++----------------- drivers/ide/ide-tape.c | 42 ++++++++++++++++++++++-------------------- drivers/scsi/ide-scsi.c | 24 +++++++++++++----------- 3 files changed, 53 insertions(+), 48 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 8dbb340dbfc0..dae1c90d421f 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -438,8 +438,8 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) debug_log("%s: I/O error\n", drive->name); rq->errors++; if (pc->c[0] == GPCMD_REQUEST_SENSE) { - printk(KERN_ERR "ide-floppy: I/O error in " - "request sense command\n"); + printk(KERN_ERR "%s: I/O error in request sense" + " command\n", drive->name); return ide_do_reset(drive); } /* Retry operation */ @@ -457,8 +457,8 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - printk(KERN_ERR "ide-floppy: The floppy wants to issue " - "more interrupts in DMA mode\n"); + printk(KERN_ERR "%s: The device wants to issue more interrupts " + "in DMA mode\n", drive->name); ide_dma_off(drive); return ide_do_reset(drive); } @@ -470,14 +470,14 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) ireason = hwif->INB(hwif->io_ports.nsect_addr); if (ireason & CD) { - printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__); + printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); return ide_do_reset(drive); } if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { /* Hopefully, we will never get here */ - printk(KERN_ERR "ide-floppy: We wanted to %s, ", - (ireason & IO) ? "Write" : "Read"); - printk(KERN_ERR "but the floppy wants us to %s !\n", + printk(KERN_ERR "%s: We wanted to %s, but the device wants us " + "to %s!\n", drive->name, + (ireason & IO) ? "Write" : "Read", (ireason & IO) ? "Read" : "Write"); return ide_do_reset(drive); } @@ -486,9 +486,10 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) temp = pc->xferred + bcount; if (temp > pc->req_xfer) { if (temp > pc->buf_size) { - printk(KERN_ERR "ide-floppy: The floppy wants " - "to send us more data than expected " - "- discarding data\n"); + printk(KERN_ERR "%s: The device wants to send " + "us more data than expected - " + "discarding data\n", + drive->name); ide_pad_transfer(drive, 0, bcount); ide_set_handler(drive, @@ -497,8 +498,8 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) NULL); return ide_started; } - debug_log("The floppy wants to send us more data than" - " expected - allowing transfer\n"); + debug_log("The device wants to send us more data than " + "expected - allowing transfer\n"); } } if (pc->flags & PC_FLAG_WRITING) @@ -552,14 +553,14 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) u8 ireason; if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "ide-floppy: Strange, packet command " - "initiated yet DRQ isn't asserted\n"); + printk(KERN_ERR "%s: Strange, packet command initiated yet " + "DRQ isn't asserted\n", drive->name); return startstop; } ireason = hwif->INB(hwif->io_ports.nsect_addr); if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "ide-floppy: (IO,CoD) != (0,1) " - "while issuing a packet command\n"); + printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " + "a packet command\n", drive->name); return ide_do_reset(drive); } /* diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index cc70e759fc8e..8f10211c2b08 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -776,8 +776,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) debug_log(DBG_ERR, "%s: I/O error\n", tape->name); if (pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "ide-tape: I/O error in request" - " sense command\n"); + printk(KERN_ERR "%s: I/O error in request sense" + " command\n", drive->name); return ide_do_reset(drive); } debug_log(DBG_ERR, "[cmd %x]: check condition\n", @@ -805,8 +805,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - printk(KERN_ERR "ide-tape: The tape wants to issue more " - "interrupts in DMA mode\n"); + printk(KERN_ERR "%s: The device wants to issue more interrupts " + "in DMA mode\n", drive->name); ide_dma_off(drive); return ide_do_reset(drive); } @@ -817,14 +817,14 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) ireason = hwif->INB(hwif->io_ports.nsect_addr); if (ireason & CD) { - printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__); + printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); return ide_do_reset(drive); } if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { /* Hopefully, we will never get here */ - printk(KERN_ERR "ide-tape: We wanted to %s, ", - (ireason & IO) ? "Write" : "Read"); - printk(KERN_ERR "ide-tape: but the tape wants us to %s !\n", + printk(KERN_ERR "%s: We wanted to %s, but the device wants us " + "to %s!\n", drive->name, + (ireason & IO) ? "Write" : "Read", (ireason & IO) ? "Read" : "Write"); return ide_do_reset(drive); } @@ -833,15 +833,16 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) temp = pc->xferred + bcount; if (temp > pc->req_xfer) { if (temp > pc->buf_size) { - printk(KERN_ERR "ide-tape: The tape wants to " - "send us more data than expected " - "- discarding data\n"); + printk(KERN_ERR "%s: The device wants to send " + "us more data than expected - " + "discarding data\n", + drive->name); ide_pad_transfer(drive, 0, bcount); ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); return ide_started; } - debug_log(DBG_SENSE, "The tape wants to send us more " + debug_log(DBG_SENSE, "The device wants to send us more " "data than expected - allowing transfer\n"); } iobuf = &idetape_input_buffers; @@ -914,26 +915,27 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) u8 ireason; if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "ide-tape: Strange, packet command initiated " - "yet DRQ isn't asserted\n"); + printk(KERN_ERR "%s: Strange, packet command initiated yet " + "DRQ isn't asserted\n", drive->name); return startstop; } ireason = hwif->INB(hwif->io_ports.nsect_addr); while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { - printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while issuing " - "a packet command, retrying\n"); + printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " + "a packet command, retrying\n", drive->name); udelay(100); ireason = hwif->INB(hwif->io_ports.nsect_addr); if (retries == 0) { - printk(KERN_ERR "ide-tape: (IO,CoD != (0,1) while " - "issuing a packet command, ignoring\n"); + printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " + "a packet command, ignoring\n", + drive->name); ireason |= CD; ireason &= ~IO; } } if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "ide-tape: (IO,CoD) != (0,1) while issuing " - "a packet command\n"); + printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " + "a packet command\n", drive->name); return ide_do_reset(drive); } /* Set the interrupt routine */ diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index d2dad9039e0d..5b8a1931ac9b 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -391,7 +391,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) ireason = hwif->INB(hwif->io_ports.nsect_addr); if (ireason & CD) { - printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n"); + printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); return ide_do_reset (drive); } if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { @@ -406,9 +406,10 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) temp = pc->xferred + bcount; if (temp > pc->req_xfer) { if (temp > pc->buf_size) { - printk(KERN_ERR "ide-scsi: The scsi wants to " - "send us more data than expected " - "- discarding data\n"); + printk(KERN_ERR "%s: The device wants to send " + "us more data than expected - " + "discarding data\n", + drive->name); temp = pc->buf_size - pc->xferred; if (temp) { if (pc->sg) @@ -417,8 +418,9 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) else hwif->input_data(drive, NULL, pc->cur_pos, temp); - printk(KERN_ERR "ide-scsi: transferred" - " %d of %d bytes\n", + printk(KERN_ERR "%s: transferred %d of " + "%d bytes\n", + drive->name, temp, bcount); } pc->xferred += temp; @@ -427,7 +429,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); return ide_started; } - debug_log("The scsi wants to send us more data than " + debug_log("The device wants to send us more data than " "expected - allowing transfer\n"); } xferfunc = hwif->input_data; @@ -458,14 +460,14 @@ static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) u8 ireason; if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) { - printk(KERN_ERR "ide-scsi: Strange, packet command " - "initiated yet DRQ isn't asserted\n"); + printk(KERN_ERR "%s: Strange, packet command initiated yet " + "DRQ isn't asserted\n", drive->name); return startstop; } ireason = hwif->INB(hwif->io_ports.nsect_addr); if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while " - "issuing a packet command\n"); + printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " + "a packet command\n", drive->name); return ide_do_reset (drive); } -- cgit v1.2.3 From 258ec4113081c2b63117dc2df6d94c3e484e9747 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:55 +0200 Subject: ide-tape: make idetape_retry_pc() void idetape_retry_pc() always returns ide_stopped so make it void. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8f10211c2b08..48fccf154f68 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -696,7 +696,7 @@ static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc, * last packet command. We queue a request sense packet command in * the head of the request list. */ -static ide_startstop_t idetape_retry_pc (ide_drive_t *drive) +static void idetape_retry_pc(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc *pc; @@ -708,7 +708,6 @@ static ide_startstop_t idetape_retry_pc (ide_drive_t *drive) idetape_create_request_sense_cmd(pc); set_bit(IDETAPE_FLAG_IGNORE_DSC, &tape->flags); idetape_queue_pc_head(drive, pc, rq); - return ide_stopped; } /* @@ -784,7 +783,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) pc->c[0]); /* Retry operation */ - return idetape_retry_pc(drive); + idetape_retry_pc(drive); + return ide_stopped; } pc->error = 0; if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && @@ -1078,7 +1078,8 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) printk(KERN_ERR "ide-tape: %s: I/O error, ", tape->name); /* Retry operation */ - return idetape_retry_pc(drive); + idetape_retry_pc(drive); + return ide_stopped; } pc->error = 0; if (tape->failed_pc == pc) -- cgit v1.2.3 From 5985e6abbd89f969c17fd80ab864c80f089827a3 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:55 +0200 Subject: ide-tape: merge callbacks The appropriate functionality of the callback is established through querying the ATAPI packet command in pc->c[0]. While at it: - add uptodate variable + leave just one idetape_end_request() call - don't use HWGROUP() macro Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 168 +++++++++++++++++++------------------------------ 1 file changed, 64 insertions(+), 104 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 48fccf154f68..d387aaf0eb39 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -503,18 +503,6 @@ static struct request *idetape_next_rq_storage(ide_drive_t *drive) return (&tape->rq_stack[tape->rq_stack_index++]); } -static void idetape_init_pc(struct ide_atapi_pc *pc) -{ - memset(pc->c, 0, 12); - pc->retries = 0; - pc->flags = 0; - pc->req_xfer = 0; - pc->buf = pc->pc_buf; - pc->buf_size = IDETAPE_PC_BUFFER_SIZE; - pc->bh = NULL; - pc->b_data = NULL; -} - /* * called on each failed packet command retry to analyze the request sense. We * currently do not utilize this information. @@ -631,30 +619,85 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) return 0; } -static ide_startstop_t idetape_request_sense_callback(ide_drive_t *drive) +static ide_startstop_t ide_tape_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; + struct ide_atapi_pc *pc = tape->pc; + int uptodate = pc->error ? 0 : 1; debug_log(DBG_PROCS, "Enter %s\n", __func__); - if (!tape->pc->error) { - idetape_analyze_error(drive, tape->pc->buf); - idetape_end_request(drive, 1, 0); - } else { - printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - " - "Aborting request!\n"); - idetape_end_request(drive, 0, 0); + if (pc->c[0] == REQUEST_SENSE) { + if (uptodate) + idetape_analyze_error(drive, pc->buf); + else + printk(KERN_ERR "ide-tape: Error in REQUEST SENSE " + "itself - Aborting request!\n"); + } else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) { + struct request *rq = drive->hwif->hwgroup->rq; + int blocks = pc->xferred / tape->blk_size; + + tape->avg_size += blocks * tape->blk_size; + + if (time_after_eq(jiffies, tape->avg_time + HZ)) { + tape->avg_speed = tape->avg_size * HZ / + (jiffies - tape->avg_time) / 1024; + tape->avg_size = 0; + tape->avg_time = jiffies; + } + + tape->first_frame += blocks; + rq->current_nr_sectors -= blocks; + + if (pc->error) + uptodate = pc->error; + } else if (pc->c[0] == READ_POSITION && uptodate) { + u8 *readpos = tape->pc->buf; + + debug_log(DBG_SENSE, "BOP - %s\n", + (readpos[0] & 0x80) ? "Yes" : "No"); + debug_log(DBG_SENSE, "EOP - %s\n", + (readpos[0] & 0x40) ? "Yes" : "No"); + + if (readpos[0] & 0x4) { + printk(KERN_INFO "ide-tape: Block location is unknown" + "to the tape\n"); + clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags); + uptodate = 0; + } else { + debug_log(DBG_SENSE, "Block Location - %u\n", + be32_to_cpu(*(u32 *)&readpos[4])); + + tape->partition = readpos[1]; + tape->first_frame = be32_to_cpu(*(u32 *)&readpos[4]); + set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags); + } } + + idetape_end_request(drive, uptodate, 0); + return ide_stopped; } +static void idetape_init_pc(struct ide_atapi_pc *pc) +{ + memset(pc->c, 0, 12); + pc->retries = 0; + pc->flags = 0; + pc->req_xfer = 0; + pc->buf = pc->pc_buf; + pc->buf_size = IDETAPE_PC_BUFFER_SIZE; + pc->bh = NULL; + pc->b_data = NULL; + pc->idetape_callback = ide_tape_callback; +} + static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc) { idetape_init_pc(pc); pc->c[0] = REQUEST_SENSE; pc->c[4] = 20; pc->req_xfer = 20; - pc->idetape_callback = &idetape_request_sense_callback; } static void idetape_init_rq(struct request *rq, u8 cmd) @@ -1025,16 +1068,6 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, } } -static ide_startstop_t idetape_pc_callback(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - idetape_end_request(drive, tape->pc->error ? 0 : 1, 0); - return ide_stopped; -} - /* A mode sense command is used to "sense" tape parameters. */ static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code) { @@ -1060,7 +1093,6 @@ static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code) pc->req_xfer = 24; else pc->req_xfer = 50; - pc->idetape_callback = &idetape_pc_callback; } static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) @@ -1091,32 +1123,6 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) return pc->idetape_callback(drive); } -static ide_startstop_t idetape_rw_callback(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - struct request *rq = HWGROUP(drive)->rq; - int blocks = tape->pc->xferred / tape->blk_size; - - tape->avg_size += blocks * tape->blk_size; - - if (time_after_eq(jiffies, tape->avg_time + HZ)) { - tape->avg_speed = tape->avg_size * HZ / - (jiffies - tape->avg_time) / 1024; - tape->avg_size = 0; - tape->avg_time = jiffies; - } - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - tape->first_frame += blocks; - rq->current_nr_sectors -= blocks; - - if (!tape->pc->error) - idetape_end_request(drive, 1, 0); - else - idetape_end_request(drive, tape->pc->error, 0); - return ide_stopped; -} - static void idetape_create_read_cmd(idetape_tape_t *tape, struct ide_atapi_pc *pc, unsigned int length, struct idetape_bh *bh) @@ -1125,7 +1131,6 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, pc->c[0] = READ_6; put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->idetape_callback = &idetape_rw_callback; pc->bh = bh; atomic_set(&bh->b_count, 0); pc->buf = NULL; @@ -1143,7 +1148,6 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, pc->c[0] = WRITE_6; put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; - pc->idetape_callback = &idetape_rw_callback; pc->flags |= PC_FLAG_WRITING; pc->bh = bh; pc->b_data = bh->b_data; @@ -1412,40 +1416,6 @@ static void idetape_init_merge_buffer(idetape_tape_t *tape) } } -static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - u8 *readpos = tape->pc->buf; - - debug_log(DBG_PROCS, "Enter %s\n", __func__); - - if (!tape->pc->error) { - debug_log(DBG_SENSE, "BOP - %s\n", - (readpos[0] & 0x80) ? "Yes" : "No"); - debug_log(DBG_SENSE, "EOP - %s\n", - (readpos[0] & 0x40) ? "Yes" : "No"); - - if (readpos[0] & 0x4) { - printk(KERN_INFO "ide-tape: Block location is unknown" - "to the tape\n"); - clear_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags); - idetape_end_request(drive, 0, 0); - } else { - debug_log(DBG_SENSE, "Block Location - %u\n", - be32_to_cpu(*(u32 *)&readpos[4])); - - tape->partition = readpos[1]; - tape->first_frame = - be32_to_cpu(*(u32 *)&readpos[4]); - set_bit(IDETAPE_FLAG_ADDRESS_VALID, &tape->flags); - idetape_end_request(drive, 1, 0); - } - } else { - idetape_end_request(drive, 0, 0); - } - return ide_stopped; -} - /* * Write a filemark if write_filemark=1. Flush the device buffers without * writing a filemark otherwise. @@ -1457,14 +1427,12 @@ static void idetape_create_write_filemark_cmd(ide_drive_t *drive, pc->c[0] = WRITE_FILEMARKS; pc->c[4] = write_filemark; pc->flags |= PC_FLAG_WAIT_FOR_DSC; - pc->idetape_callback = &idetape_pc_callback; } static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc) { idetape_init_pc(pc); pc->c[0] = TEST_UNIT_READY; - pc->idetape_callback = &idetape_pc_callback; } /* @@ -1502,7 +1470,6 @@ static void idetape_create_load_unload_cmd(ide_drive_t *drive, pc->c[0] = START_STOP; pc->c[4] = cmd; pc->flags |= PC_FLAG_WAIT_FOR_DSC; - pc->idetape_callback = &idetape_pc_callback; } static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) @@ -1554,7 +1521,6 @@ static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc) idetape_init_pc(pc); pc->c[0] = READ_POSITION; pc->req_xfer = 20; - pc->idetape_callback = &idetape_read_position_callback; } static int idetape_read_position(ide_drive_t *drive) @@ -1582,7 +1548,6 @@ static void idetape_create_locate_cmd(ide_drive_t *drive, put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]); pc->c[8] = partition; pc->flags |= PC_FLAG_WAIT_FOR_DSC; - pc->idetape_callback = &idetape_pc_callback; } static int idetape_create_prevent_cmd(ide_drive_t *drive, @@ -1597,7 +1562,6 @@ static int idetape_create_prevent_cmd(ide_drive_t *drive, idetape_init_pc(pc); pc->c[0] = ALLOW_MEDIUM_REMOVAL; pc->c[4] = prevent; - pc->idetape_callback = &idetape_pc_callback; return 1; } @@ -1704,7 +1668,6 @@ static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc) pc->c[0] = INQUIRY; pc->c[4] = 254; pc->req_xfer = 254; - pc->idetape_callback = &idetape_pc_callback; } static void idetape_create_rewind_cmd(ide_drive_t *drive, @@ -1713,7 +1676,6 @@ static void idetape_create_rewind_cmd(ide_drive_t *drive, idetape_init_pc(pc); pc->c[0] = REZERO_UNIT; pc->flags |= PC_FLAG_WAIT_FOR_DSC; - pc->idetape_callback = &idetape_pc_callback; } static void idetape_create_erase_cmd(struct ide_atapi_pc *pc) @@ -1722,7 +1684,6 @@ static void idetape_create_erase_cmd(struct ide_atapi_pc *pc) pc->c[0] = ERASE; pc->c[1] = 1; pc->flags |= PC_FLAG_WAIT_FOR_DSC; - pc->idetape_callback = &idetape_pc_callback; } static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) @@ -1732,7 +1693,6 @@ static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd) put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]); pc->c[1] = cmd; pc->flags |= PC_FLAG_WAIT_FOR_DSC; - pc->idetape_callback = &idetape_pc_callback; } /* Queue up a character device originated write request. */ -- cgit v1.2.3 From 92f5daff2b8439fa4c57c57f47823ffc459c3bd9 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:55 +0200 Subject: ide-tape: make pc->idetape_callback void There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 13 +++++++------ include/linux/ide.h | 2 +- 2 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index d387aaf0eb39..88d26efdf844 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -619,7 +619,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) return 0; } -static ide_startstop_t ide_tape_callback(ide_drive_t *drive) +static void ide_tape_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc *pc = tape->pc; @@ -675,8 +675,6 @@ static ide_startstop_t ide_tape_callback(ide_drive_t *drive) } idetape_end_request(drive, uptodate, 0); - - return ide_stopped; } static void idetape_init_pc(struct ide_atapi_pc *pc) @@ -843,7 +841,8 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) if (tape->failed_pc == pc) tape->failed_pc = NULL; /* Command finished - Call the callback function */ - return pc->idetape_callback(drive); + pc->idetape_callback(drive); + return ide_stopped; } if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { @@ -1035,7 +1034,8 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, pc->error = IDETAPE_ERROR_GENERAL; } tape->failed_pc = NULL; - return pc->idetape_callback(drive); + pc->idetape_callback(drive); + return ide_stopped; } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); @@ -1120,7 +1120,8 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) pc->error = IDETAPE_ERROR_GENERAL; tape->failed_pc = NULL; } - return pc->idetape_callback(drive); + pc->idetape_callback(drive); + return ide_stopped; } static void idetape_create_read_cmd(idetape_tape_t *tape, diff --git a/include/linux/ide.h b/include/linux/ide.h index 04267dc1edf2..8936b21a7030 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -641,7 +641,7 @@ struct ide_atapi_pc { */ u8 pc_buf[256]; void (*idefloppy_callback) (ide_drive_t *); - ide_startstop_t (*idetape_callback) (ide_drive_t *); + void (*idetape_callback) (ide_drive_t *); /* idetape only */ struct idetape_bh *bh; -- cgit v1.2.3 From 81f4938239fea86d0a7529194a37fb81041171e0 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 15 Jul 2008 21:21:56 +0200 Subject: ide-floppy: merge callbacks The appropriate functionality of the callback is established through querying the ATAPI packet command in pc->c[0]. While at it, simplify if (floppy->failed_pc)-branch to be found in the original idefloppy_request_sense_callback(). Bart: - keep handling for blk_pc_request() requests unchanged + add FIXME - add uptodate variable + leave just one idefloppy_end_request() call - add newline to the debug message Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 69 ++++++++++++++++-------------------------------- 1 file changed, 23 insertions(+), 46 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index dae1c90d421f..2058a6f3f331 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -312,50 +312,38 @@ static struct request *idefloppy_next_rq_storage(ide_drive_t *drive) return (&floppy->rq_stack[floppy->rq_stack_index++]); } -static void idefloppy_request_sense_callback(ide_drive_t *drive) +static void ide_floppy_callback(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - u8 *buf = floppy->pc->buf; + struct ide_atapi_pc *pc = floppy->pc; + int uptodate = pc->error ? 0 : 1; debug_log("Reached %s\n", __func__); - if (!floppy->pc->error) { - floppy->sense_key = buf[2] & 0x0F; - floppy->asc = buf[12]; - floppy->ascq = buf[13]; - floppy->progress_indication = buf[15] & 0x80 ? - (u16)get_unaligned((u16 *)&buf[16]) : 0x10000; + if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 || + (pc->rq && blk_pc_request(pc->rq))) + uptodate = 1; /* FIXME */ + else if (pc->c[0] == GPCMD_REQUEST_SENSE) { + u8 *buf = floppy->pc->buf; - if (floppy->failed_pc) - debug_log("pc = %x, sense key = %x, asc = %x," - " ascq = %x\n", - floppy->failed_pc->c[0], - floppy->sense_key, - floppy->asc, - floppy->ascq); - else - debug_log("sense key = %x, asc = %x, ascq = %x\n", - floppy->sense_key, - floppy->asc, - floppy->ascq); + if (!pc->error) { + floppy->sense_key = buf[2] & 0x0F; + floppy->asc = buf[12]; + floppy->ascq = buf[13]; + floppy->progress_indication = buf[15] & 0x80 ? + (u16)get_unaligned((u16 *)&buf[16]) : 0x10000; + if (floppy->failed_pc) + debug_log("pc = %x, ", floppy->failed_pc->c[0]); - idefloppy_end_request(drive, 1, 0); - } else { - printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting" - " request!\n"); - idefloppy_end_request(drive, 0, 0); + debug_log("sense key = %x, asc = %x, ascq = %x\n", + floppy->sense_key, floppy->asc, floppy->ascq); + } else + printk(KERN_ERR "Error in REQUEST SENSE itself - " + "Aborting request!\n"); } -} -/* General packet command callback function. */ -static void idefloppy_pc_callback(ide_drive_t *drive) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - debug_log("Reached %s\n", __func__); - - idefloppy_end_request(drive, floppy->pc->error ? 0 : 1, 0); + idefloppy_end_request(drive, uptodate, 0); } static void idefloppy_init_pc(struct ide_atapi_pc *pc) @@ -366,7 +354,7 @@ static void idefloppy_init_pc(struct ide_atapi_pc *pc) pc->req_xfer = 0; pc->buf = pc->pc_buf; pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE; - pc->idefloppy_callback = &idefloppy_pc_callback; + pc->idefloppy_callback = &ide_floppy_callback; } static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc) @@ -375,7 +363,6 @@ static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc) pc->c[0] = GPCMD_REQUEST_SENSE; pc->c[4] = 255; pc->req_xfer = 18; - pc->idefloppy_callback = &idefloppy_request_sense_callback; } /* @@ -668,14 +655,6 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, } } -static void idefloppy_rw_callback(ide_drive_t *drive) -{ - debug_log("Reached %s\n", __func__); - - idefloppy_end_request(drive, 1, 0); - return; -} - static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent) { debug_log("creating prevent removal command, prevent = %d\n", prevent); @@ -770,7 +749,6 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]); - pc->idefloppy_callback = &idefloppy_rw_callback; pc->rq = rq; pc->b_count = cmd == READ ? 0 : rq->bio->bi_size; if (rq->cmd_flags & REQ_RW) @@ -784,7 +762,6 @@ static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, struct ide_atapi_pc *pc, struct request *rq) { idefloppy_init_pc(pc); - pc->idefloppy_callback = &idefloppy_rw_callback; memcpy(pc->c, rq->cmd, sizeof(pc->c)); pc->rq = rq; pc->b_count = rq->data_len; -- cgit v1.2.3 From 1b06e92aa03018e4b3ba281e03a7711d9b71a998 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:56 +0200 Subject: ide-{floppy,tape}: merge pc->idefloppy_callback and pc->idetape_callback Merge pc->idefloppy_callback and pc->idetape_callback into pc->callback. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 6 +++--- drivers/ide/ide-tape.c | 8 ++++---- include/linux/ide.h | 4 ++-- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 2058a6f3f331..a9f3127a74ed 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -354,7 +354,7 @@ static void idefloppy_init_pc(struct ide_atapi_pc *pc) pc->req_xfer = 0; pc->buf = pc->pc_buf; pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE; - pc->idefloppy_callback = &ide_floppy_callback; + pc->callback = ide_floppy_callback; } static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc) @@ -438,7 +438,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) if (floppy->failed_pc == pc) floppy->failed_pc = NULL; /* Command finished - Call the callback function */ - pc->idefloppy_callback(drive); + pc->callback(drive); return ide_stopped; } @@ -612,7 +612,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, pc->error = IDEFLOPPY_ERROR_GENERAL; floppy->failed_pc = NULL; - pc->idefloppy_callback(drive); + pc->callback(drive); return ide_stopped; } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 88d26efdf844..ce9b6d327528 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -687,7 +687,7 @@ static void idetape_init_pc(struct ide_atapi_pc *pc) pc->buf_size = IDETAPE_PC_BUFFER_SIZE; pc->bh = NULL; pc->b_data = NULL; - pc->idetape_callback = ide_tape_callback; + pc->callback = ide_tape_callback; } static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc) @@ -841,7 +841,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) if (tape->failed_pc == pc) tape->failed_pc = NULL; /* Command finished - Call the callback function */ - pc->idetape_callback(drive); + pc->callback(drive); return ide_stopped; } @@ -1034,7 +1034,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, pc->error = IDETAPE_ERROR_GENERAL; } tape->failed_pc = NULL; - pc->idetape_callback(drive); + pc->callback(drive); return ide_stopped; } debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); @@ -1120,7 +1120,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) pc->error = IDETAPE_ERROR_GENERAL; tape->failed_pc = NULL; } - pc->idetape_callback(drive); + pc->callback(drive); return ide_stopped; } diff --git a/include/linux/ide.h b/include/linux/ide.h index 8936b21a7030..f079456adfdb 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -640,8 +640,8 @@ struct ide_atapi_pc { * to change/removal later. */ u8 pc_buf[256]; - void (*idefloppy_callback) (ide_drive_t *); - void (*idetape_callback) (ide_drive_t *); + + void (*callback)(ide_drive_t *); /* idetape only */ struct idetape_bh *bh; -- cgit v1.2.3 From 5e3310958204912f3f00be2592c945fbc37db6ae Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:56 +0200 Subject: ide-{floppy,tape}: PC_FLAG_DMA_RECOMMENDED -> PC_FLAG_DMA_OK * Use PC_FLAG_DMA_OK flag instead of PC_FLAG_DMA_RECOMMENDED one. * Remove no longer used PC_FLAG_DMA_RECOMMENDED flag. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 6 +++--- drivers/ide/ide-tape.c | 6 +++--- include/linux/ide.h | 9 ++++----- 3 files changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index a9f3127a74ed..dbefe35c1396 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -630,7 +630,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, } dma = 0; - if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) + if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) dma = !hwif->dma_ops->dma_setup(drive); ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma); @@ -755,7 +755,7 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, pc->flags |= PC_FLAG_WRITING; pc->buf = NULL; pc->req_xfer = pc->buf_size = blocks * floppy->block_size; - pc->flags |= PC_FLAG_DMA_RECOMMENDED; + pc->flags |= PC_FLAG_DMA_OK; } static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, @@ -769,7 +769,7 @@ static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, pc->flags |= PC_FLAG_WRITING; pc->buf = rq->data; if (rq->bio) - pc->flags |= PC_FLAG_DMA_RECOMMENDED; + pc->flags |= PC_FLAG_DMA_OK; /* * possibly problematic, doesn't look like ide-floppy correctly * handled scattered requests if dma fails... diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index ce9b6d327528..e8a5852fa2d4 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1050,7 +1050,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, pc->flags &= ~PC_FLAG_DMA_ERROR; ide_dma_off(drive); } - if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) + if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) dma_ok = !hwif->dma_ops->dma_setup(drive); ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); @@ -1138,7 +1138,7 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; if (pc->req_xfer == tape->buffer_size) - pc->flags |= PC_FLAG_DMA_RECOMMENDED; + pc->flags |= PC_FLAG_DMA_OK; } static void idetape_create_write_cmd(idetape_tape_t *tape, @@ -1157,7 +1157,7 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; if (pc->req_xfer == tape->buffer_size) - pc->flags |= PC_FLAG_DMA_RECOMMENDED; + pc->flags |= PC_FLAG_DMA_OK; } static ide_startstop_t idetape_do_request(ide_drive_t *drive, diff --git a/include/linux/ide.h b/include/linux/ide.h index f079456adfdb..63cee2947f60 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -602,12 +602,11 @@ enum { PC_FLAG_SUPPRESS_ERROR = (1 << 1), PC_FLAG_WAIT_FOR_DSC = (1 << 2), PC_FLAG_DMA_OK = (1 << 3), - PC_FLAG_DMA_RECOMMENDED = (1 << 4), - PC_FLAG_DMA_IN_PROGRESS = (1 << 5), - PC_FLAG_DMA_ERROR = (1 << 6), - PC_FLAG_WRITING = (1 << 7), + PC_FLAG_DMA_IN_PROGRESS = (1 << 4), + PC_FLAG_DMA_ERROR = (1 << 5), + PC_FLAG_WRITING = (1 << 6), /* command timed out */ - PC_FLAG_TIMEDOUT = (1 << 8), + PC_FLAG_TIMEDOUT = (1 << 7), }; struct ide_atapi_pc { -- cgit v1.2.3 From 6ffb66410dd9f5f383d9265d51ab667333a8296c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:56 +0200 Subject: ide-floppy: start DMA engine in idefloppy_transfer_pc1() Start DMA engine and set PC_FLAG_DMA_IN_PROGRESS flag in idefloppy_transfer_pc1() instead of idefloppy_issue_pc() so the Status Register and the Interrupt Reason Register are checked first. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index dbefe35c1396..1df6a3143596 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -534,6 +534,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; idefloppy_floppy_t *floppy = drive->driver_data; + struct ide_atapi_pc *pc = floppy->pc; ide_expiry_t *expiry; unsigned int timeout; ide_startstop_t startstop; @@ -568,6 +569,12 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) ide_set_handler(drive, &idefloppy_pc_intr, timeout, expiry); + /* Begin DMA, if necessary */ + if (pc->flags & PC_FLAG_DMA_OK) { + pc->flags |= PC_FLAG_DMA_IN_PROGRESS; + hwif->dma_ops->dma_start(drive); + } + if ((floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) == 0) /* Send the actual packet */ hwif->output_data(drive, NULL, floppy->pc->c, 12); @@ -633,13 +640,10 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) dma = !hwif->dma_ops->dma_setup(drive); - ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma); + if (!dma) + pc->flags &= ~PC_FLAG_DMA_OK; - if (dma) { - /* Begin DMA, if necessary */ - pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_ops->dma_start(drive); - } + ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma); if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) { /* Issue the packet command */ -- cgit v1.2.3 From 9fd13a27c8a35ff1986793cb96aaedb5e75b5368 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:57 +0200 Subject: ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc() Set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc() instead of idetape_issue_pc() to match the other ATAPI device drivers. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index e8a5852fa2d4..1ce8b31453c5 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -984,8 +984,10 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); /* Begin DMA, if necessary */ - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) + if (pc->flags & PC_FLAG_DMA_OK) { + pc->flags |= PC_FLAG_DMA_IN_PROGRESS; hwif->dma_ops->dma_start(drive); + } /* Send the actual packet */ hwif->output_data(drive, NULL, pc->c, 12); @@ -1053,11 +1055,11 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) dma_ok = !hwif->dma_ops->dma_setup(drive); + if (!dma_ok) + pc->flags &= ~PC_FLAG_DMA_OK; + ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); - if (dma_ok) - /* Will begin DMA later */ - pc->flags |= PC_FLAG_DMA_IN_PROGRESS; if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags)) { ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc, IDETAPE_WAIT_CMD, NULL); -- cgit v1.2.3 From 5a7b75ab429e9ed568be50cfbf7091f097457cb8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:57 +0200 Subject: ide-tape: factor out waiting for good ireason from idetape_transfer_pc() Factor out waiting for good ireason from idetape_transfer_pc() to ide_tape_wait_ireason() as a preparation for adding generic ide_transfer_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 34 +++++++++++++++++++++++----------- 1 file changed, 23 insertions(+), 11 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1ce8b31453c5..63b837ef7e05 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -947,21 +947,12 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) * again, the callback function will be called and then we will handle the next * request. */ -static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) + +static u8 ide_tape_wait_ireason(ide_drive_t *drive, u8 ireason) { ide_hwif_t *hwif = drive->hwif; - idetape_tape_t *tape = drive->driver_data; - struct ide_atapi_pc *pc = tape->pc; int retries = 100; - ide_startstop_t startstop; - u8 ireason; - if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "%s: Strange, packet command initiated yet " - "DRQ isn't asserted\n", drive->name); - return startstop; - } - ireason = hwif->INB(hwif->io_ports.nsect_addr); while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " "a packet command, retrying\n", drive->name); @@ -975,6 +966,27 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) ireason &= ~IO; } } + + return ireason; +} + +static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + idetape_tape_t *tape = drive->driver_data; + struct ide_atapi_pc *pc = tape->pc; + ide_startstop_t startstop; + u8 ireason; + + if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { + printk(KERN_ERR "%s: Strange, packet command initiated yet " + "DRQ isn't asserted\n", drive->name); + return startstop; + } + + ireason = hwif->INB(hwif->io_ports.nsect_addr); + ireason = ide_tape_wait_ireason(drive, ireason); + if ((ireason & CD) == 0 || (ireason & IO)) { printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " "a packet command\n", drive->name); -- cgit v1.2.3 From 5d41893c0f9caf94b449eada0279a08c86f0212e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:57 +0200 Subject: ide: add PC_FLAG_ZIP_DRIVE pc flag Add PC_FLAG_ZIP_DRIVE pc flag, set it in idefloppy_do_request() and check for it (instead of checking for IDEFLOPPY_FLAG_ZIP_DRIVE) in idefloppy_transfer_pc(). This is a preparation for adding generic ide_transfer_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 8 ++++++-- include/linux/ide.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 1df6a3143596..cff90c4b217e 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -559,7 +559,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) * 40 and 50msec work well. idefloppy_pc_intr will not be actually * used until after the packet is moved in about 50 msec. */ - if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) { + if (pc->flags & PC_FLAG_ZIP_DRIVE) { timeout = floppy->ticks; expiry = &idefloppy_transfer_pc2; } else { @@ -575,7 +575,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) hwif->dma_ops->dma_start(drive); } - if ((floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) == 0) + if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0) /* Send the actual packet */ hwif->output_data(drive, NULL, floppy->pc->c, 12); @@ -826,7 +826,11 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, return ide_stopped; } + if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) + pc->flags |= PC_FLAG_ZIP_DRIVE; + pc->rq = rq; + return idefloppy_issue_pc(drive, pc); } diff --git a/include/linux/ide.h b/include/linux/ide.h index 63cee2947f60..89feaea9e20b 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -607,6 +607,7 @@ enum { PC_FLAG_WRITING = (1 << 6), /* command timed out */ PC_FLAG_TIMEDOUT = (1 << 7), + PC_FLAG_ZIP_DRIVE = (1 << 8), }; struct ide_atapi_pc { -- cgit v1.2.3 From 794cc6804bb946826b7427d205ac391a5370d361 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:57 +0200 Subject: ide-{cd,floppy,tape}: remove checking for drive->scsi Remove checking for drive->scsi which is no longer set by IDE core code (leave the flag since it will be re-used for generic ATAPI support). Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 5 ----- drivers/ide/ide-floppy.c | 5 ----- drivers/ide/ide-tape.c | 5 ----- 3 files changed, 15 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 043129c422fe..d99847157186 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -2106,11 +2106,6 @@ static int ide_cd_probe(ide_drive_t *drive) goto failed; } } - if (drive->scsi) { - printk(KERN_INFO "ide-cd: passing drive %s to ide-scsi " - "emulation.\n", drive->name); - goto failed; - } info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL); if (info == NULL) { printk(KERN_ERR "%s: Can't allocate a cdrom structure\n", diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index cff90c4b217e..a7c138dc324c 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1579,11 +1579,6 @@ static int ide_floppy_probe(ide_drive_t *drive) " of ide-floppy\n", drive->name); goto failed; } - if (drive->scsi) { - printk(KERN_INFO "ide-floppy: passing drive %s to ide-scsi" - " emulation.\n", drive->name); - goto failed; - } floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL); if (!floppy) { printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy" diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 63b837ef7e05..2a362138f973 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2850,11 +2850,6 @@ static int ide_tape_probe(ide_drive_t *drive) " the driver\n", drive->name); goto failed; } - if (drive->scsi) { - printk(KERN_INFO "ide-tape: passing drive %s to ide-scsi" - " emulation.\n", drive->name); - goto failed; - } tape = kzalloc(sizeof(idetape_tape_t), GFP_KERNEL); if (tape == NULL) { printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n", -- cgit v1.2.3 From f83cbc77b0d5521b4f0f591ede4870316944481a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:58 +0200 Subject: ide-scsi: set drive->scsi flag for devices handled by the driver This is a preparation for adding generic ide_transfer_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 5b8a1931ac9b..c9fdf60c9dcf 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -629,6 +629,8 @@ static void ide_scsi_remove(ide_drive_t *drive) put_disk(g); ide_scsi_put(scsi); + + drive->scsi = 0; } static int ide_scsi_probe(ide_drive_t *); @@ -969,6 +971,8 @@ static int ide_scsi_probe(ide_drive_t *drive) !(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t)))) return -ENODEV; + drive->scsi = 1; + g = alloc_disk(1 << PARTN_BITS); if (!g) goto out_host_put; @@ -1009,6 +1013,7 @@ static int ide_scsi_probe(ide_drive_t *drive) put_disk(g); out_host_put: + drive->scsi = 0; scsi_host_put(host); return err; } -- cgit v1.2.3 From 594c16d8dd54cd7b1c5ef1ec3ac0f6bf34301dad Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:58 +0200 Subject: ide: add ide_transfer_pc() helper * Add ide-atapi.c file for generic ATAPI support together with CONFIG_IDE_ATAPI config option. * Add generic ide_transfer_pc() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 6 +++++ drivers/ide/Makefile | 1 + drivers/ide/ide-atapi.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/ide/ide-floppy.c | 28 +------------------ drivers/ide/ide-tape.c | 56 ++------------------------------------ drivers/scsi/ide-scsi.c | 30 ++------------------- include/linux/ide.h | 3 +++ 7 files changed, 85 insertions(+), 109 deletions(-) create mode 100644 drivers/ide/ide-atapi.c diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 1607536ff5fb..cf707c8f08d4 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -98,6 +98,9 @@ if BLK_DEV_IDE comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" +config IDE_ATAPI + bool + config BLK_DEV_IDE_SATA bool "Support for SATA (deprecated; conflicts with libata SATA driver)" default n @@ -201,6 +204,7 @@ config BLK_DEV_IDECD_VERBOSE_ERRORS config BLK_DEV_IDETAPE tristate "Include IDE/ATAPI TAPE support" + select IDE_ATAPI help If you have an IDE tape drive using the ATAPI protocol, say Y. ATAPI is a newer protocol used by IDE tape and CD-ROM drives, @@ -223,6 +227,7 @@ config BLK_DEV_IDETAPE config BLK_DEV_IDEFLOPPY tristate "Include IDE/ATAPI FLOPPY support" + select IDE_ATAPI ---help--- If you have an IDE floppy drive which uses the ATAPI protocol, answer Y. ATAPI is a newer protocol used by IDE CD-ROM/tape/floppy @@ -246,6 +251,7 @@ config BLK_DEV_IDEFLOPPY config BLK_DEV_IDESCSI tristate "SCSI emulation support" depends on SCSI + select IDE_ATAPI ---help--- WARNING: ide-scsi is no longer needed for cd writing applications! The 2.6 kernel supports direct writing to ide-cd, which eliminates diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index f94b679b611e..a2b3f84d710d 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -14,6 +14,7 @@ EXTRA_CFLAGS += -Idrivers/ide ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o # core IDE code +ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c new file mode 100644 index 000000000000..25939bc60402 --- /dev/null +++ b/drivers/ide/ide-atapi.c @@ -0,0 +1,70 @@ +/* + * ATAPI support. + */ + +#include +#include +#include + +static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) +{ + ide_hwif_t *hwif = drive->hwif; + int retries = 100; + + while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { + printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " + "a packet command, retrying\n", drive->name); + udelay(100); + ireason = hwif->INB(hwif->io_ports.nsect_addr); + if (retries == 0) { + printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " + "a packet command, ignoring\n", + drive->name); + ireason |= CD; + ireason &= ~IO; + } + } + + return ireason; +} + +ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, + ide_handler_t *handler, unsigned int timeout, + ide_expiry_t *expiry) +{ + ide_hwif_t *hwif = drive->hwif; + ide_startstop_t startstop; + u8 ireason; + + if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { + printk(KERN_ERR "%s: Strange, packet command initiated yet " + "DRQ isn't asserted\n", drive->name); + return startstop; + } + + ireason = hwif->INB(hwif->io_ports.nsect_addr); + if (drive->media == ide_tape && !drive->scsi) + ireason = ide_wait_ireason(drive, ireason); + + if ((ireason & CD) == 0 || (ireason & IO)) { + printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " + "a packet command\n", drive->name); + return ide_do_reset(drive); + } + + /* Set the interrupt routine */ + ide_set_handler(drive, handler, timeout, expiry); + + /* Begin DMA, if necessary */ + if (pc->flags & PC_FLAG_DMA_OK) { + pc->flags |= PC_FLAG_DMA_IN_PROGRESS; + hwif->dma_ops->dma_start(drive); + } + + /* Send the actual packet */ + if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0) + hwif->output_data(drive, NULL, pc->c, 12); + + return ide_started; +} +EXPORT_SYMBOL_GPL(ide_transfer_pc); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index a7c138dc324c..e7a1025c03c4 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -532,25 +532,11 @@ static int idefloppy_transfer_pc2(ide_drive_t *drive) static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; idefloppy_floppy_t *floppy = drive->driver_data; struct ide_atapi_pc *pc = floppy->pc; ide_expiry_t *expiry; unsigned int timeout; - ide_startstop_t startstop; - u8 ireason; - if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "%s: Strange, packet command initiated yet " - "DRQ isn't asserted\n", drive->name); - return startstop; - } - ireason = hwif->INB(hwif->io_ports.nsect_addr); - if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " - "a packet command\n", drive->name); - return ide_do_reset(drive); - } /* * The following delay solves a problem with ATAPI Zip 100 drives * where the Busy flag was apparently being deasserted before the @@ -567,19 +553,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) expiry = NULL; } - ide_set_handler(drive, &idefloppy_pc_intr, timeout, expiry); - - /* Begin DMA, if necessary */ - if (pc->flags & PC_FLAG_DMA_OK) { - pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_ops->dma_start(drive); - } - - if ((pc->flags & PC_FLAG_ZIP_DRIVE) == 0) - /* Send the actual packet */ - hwif->output_data(drive, NULL, floppy->pc->c, 12); - - return ide_started; + return ide_transfer_pc(drive, pc, idefloppy_pc_intr, timeout, expiry); } static void ide_floppy_report_error(idefloppy_floppy_t *floppy, diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2a362138f973..5adc2c9ae418 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -947,64 +947,12 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) * again, the callback function will be called and then we will handle the next * request. */ - -static u8 ide_tape_wait_ireason(ide_drive_t *drive, u8 ireason) -{ - ide_hwif_t *hwif = drive->hwif; - int retries = 100; - - while (retries-- && ((ireason & CD) == 0 || (ireason & IO))) { - printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " - "a packet command, retrying\n", drive->name); - udelay(100); - ireason = hwif->INB(hwif->io_ports.nsect_addr); - if (retries == 0) { - printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing " - "a packet command, ignoring\n", - drive->name); - ireason |= CD; - ireason &= ~IO; - } - } - - return ireason; -} - static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - struct ide_atapi_pc *pc = tape->pc; - ide_startstop_t startstop; - u8 ireason; - - if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { - printk(KERN_ERR "%s: Strange, packet command initiated yet " - "DRQ isn't asserted\n", drive->name); - return startstop; - } - - ireason = hwif->INB(hwif->io_ports.nsect_addr); - ireason = ide_tape_wait_ireason(drive, ireason); - if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " - "a packet command\n", drive->name); - return ide_do_reset(drive); - } - /* Set the interrupt routine */ - ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); - - /* Begin DMA, if necessary */ - if (pc->flags & PC_FLAG_DMA_OK) { - pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_ops->dma_start(drive); - } - - /* Send the actual packet */ - hwif->output_data(drive, NULL, pc->c, 12); - - return ide_started; + return ide_transfer_pc(drive, tape->pc, idetape_pc_intr, + IDETAPE_WAIT_CMD, NULL); } static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index c9fdf60c9dcf..d41348f2245e 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -453,36 +453,10 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; idescsi_scsi_t *scsi = drive_to_idescsi(drive); - struct ide_atapi_pc *pc = scsi->pc; - ide_startstop_t startstop; - u8 ireason; - - if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) { - printk(KERN_ERR "%s: Strange, packet command initiated yet " - "DRQ isn't asserted\n", drive->name); - return startstop; - } - ireason = hwif->INB(hwif->io_ports.nsect_addr); - if ((ireason & CD) == 0 || (ireason & IO)) { - printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing " - "a packet command\n", drive->name); - return ide_do_reset (drive); - } - /* Set the interrupt routine */ - ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); - - if (pc->flags & PC_FLAG_DMA_OK) { - pc->flags |= PC_FLAG_DMA_IN_PROGRESS; - hwif->dma_ops->dma_start(drive); - } - - /* Send the actual packet */ - hwif->output_data(drive, NULL, scsi->pc->c, 12); - - return ide_started; + return ide_transfer_pc(drive, scsi->pc, idescsi_pc_intr, + get_timeout(scsi->pc), idescsi_expiry); } static inline int idescsi_set_direction(struct ide_atapi_pc *pc) diff --git a/include/linux/ide.h b/include/linux/ide.h index 89feaea9e20b..bed3c58798ae 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -967,6 +967,9 @@ extern int drive_is_ready(ide_drive_t *); void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); +ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *, + ide_handler_t *, unsigned int, ide_expiry_t *); + ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *); void task_end_request(ide_drive_t *, struct request *, u8); -- cgit v1.2.3 From 4cc196897de9e6c02cf86debc5b9f7cf1b69a214 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:58 +0200 Subject: ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc() Move idescsi_map_sg() call out from idescsi_issue_pc() to idescsi_do_request() as a preparation to adding generic ide_issue_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index d41348f2245e..1d261298d61a 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -514,16 +514,16 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, /* Request to transfer the entire buffer at once */ bcount = min(pc->req_xfer, 63 * 1024); - if (drive->using_dma && !idescsi_map_sg(drive, pc)) { + if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) { hwif->sg_mapped = 1; dma = !hwif->dma_ops->dma_setup(drive); hwif->sg_mapped = 0; } - ide_pktcmd_tf_load(drive, 0, bcount, dma); + if (!dma) + pc->flags &= ~PC_FLAG_DMA_OK; - if (dma) - pc->flags |= PC_FLAG_DMA_OK; + ide_pktcmd_tf_load(drive, 0, bcount, dma); if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) { ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc, @@ -547,8 +547,12 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r rq->sector, rq->nr_sectors, rq->current_nr_sectors); if (blk_sense_request(rq) || blk_special_request(rq)) { - return idescsi_issue_pc(drive, - (struct ide_atapi_pc *) rq->special); + struct ide_atapi_pc *pc = (struct ide_atapi_pc *)rq->special; + + if (drive->using_dma && !idescsi_map_sg(drive, pc)) + pc->flags |= PC_FLAG_DMA_OK; + + return idescsi_issue_pc(drive, pc); } blk_dump_rq_flags(rq, "ide-scsi: unsup command"); idescsi_end_request (drive, 0, 0); -- cgit v1.2.3 From 28c7214bd8c2bbd4873b8f1e7f58d86d3731124f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:21:59 +0200 Subject: ide: add PC_FLAG_DRQ_INTERRUPT pc flag Add PC_FLAG_DRQ_INTERRUPT pc flag, set it in ide*_do_request() and check for it (instead of checking for IDE*_FLAG_DRQ_INTERRUPT) in ide*_issue_pc(). This is a preparation for adding generic ide_issue_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 5 ++++- drivers/ide/ide-tape.c | 11 ++++++++--- drivers/scsi/ide-scsi.c | 6 +++++- include/linux/ide.h | 1 + 4 files changed, 18 insertions(+), 5 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index e7a1025c03c4..13f650fa2125 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -619,7 +619,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma); - if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) { + if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { /* Issue the packet command */ ide_execute_command(drive, WIN_PACKETCMD, &idefloppy_transfer_pc1, @@ -800,6 +800,9 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, return ide_stopped; } + if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) + pc->flags |= PC_FLAG_DRQ_INTERRUPT; + if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) pc->flags |= PC_FLAG_ZIP_DRIVE; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 5adc2c9ae418..cba18a675506 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1020,7 +1020,7 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); - if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags)) { + if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc, IDETAPE_WAIT_CMD, NULL); return ide_started; @@ -1143,8 +1143,10 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } /* Retry a failed packet command */ - if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) - return idetape_issue_pc(drive, tape->failed_pc); + if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) { + pc = tape->failed_pc; + goto out; + } if (postponed_rq != NULL) if (rq != postponed_rq) { @@ -1216,6 +1218,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } BUG(); out: + if (test_bit(IDETAPE_FLAG_DRQ_INTERRUPT, &tape->flags)) + pc->flags |= PC_FLAG_DRQ_INTERRUPT; + return idetape_issue_pc(drive, pc); } diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 1d261298d61a..b7c5e8391575 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -525,7 +525,7 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, ide_pktcmd_tf_load(drive, 0, bcount, dma); - if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) { + if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc, get_timeout(pc), idescsi_expiry); return ide_started; @@ -548,6 +548,10 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r if (blk_sense_request(rq) || blk_special_request(rq)) { struct ide_atapi_pc *pc = (struct ide_atapi_pc *)rq->special; + idescsi_scsi_t *scsi = drive_to_idescsi(drive); + + if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) + pc->flags |= PC_FLAG_DRQ_INTERRUPT; if (drive->using_dma && !idescsi_map_sg(drive, pc)) pc->flags |= PC_FLAG_DMA_OK; diff --git a/include/linux/ide.h b/include/linux/ide.h index bed3c58798ae..c2274ad44b2e 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -608,6 +608,7 @@ enum { /* command timed out */ PC_FLAG_TIMEDOUT = (1 << 7), PC_FLAG_ZIP_DRIVE = (1 << 8), + PC_FLAG_DRQ_INTERRUPT = (1 << 9), }; struct ide_atapi_pc { -- cgit v1.2.3 From 6bf1641ca1c7554f0da54aaf89788731b541bacc Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:00 +0200 Subject: ide: add ide_issue_pc() helper Add generic ide_issue_pc() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-atapi.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/ide/ide-floppy.c | 35 ++-------------------------------- drivers/ide/ide-tape.c | 30 ++--------------------------- drivers/scsi/ide-scsi.c | 30 ++--------------------------- include/linux/ide.h | 2 ++ 5 files changed, 57 insertions(+), 89 deletions(-) diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 25939bc60402..932a83abaf06 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -68,3 +68,52 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, return ide_started; } EXPORT_SYMBOL_GPL(ide_transfer_pc); + +ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc, + ide_handler_t *handler, unsigned int timeout, + ide_expiry_t *expiry) +{ + ide_hwif_t *hwif = drive->hwif; + u16 bcount; + u8 dma = 0; + + /* We haven't transferred any data yet */ + pc->xferred = 0; + pc->cur_pos = pc->buf; + + /* Request to transfer the entire buffer at once */ + if (drive->media == ide_tape && !drive->scsi) + bcount = pc->req_xfer; + else + bcount = min(pc->req_xfer, 63 * 1024); + + if (pc->flags & PC_FLAG_DMA_ERROR) { + pc->flags &= ~PC_FLAG_DMA_ERROR; + ide_dma_off(drive); + } + + if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) { + if (drive->scsi) + hwif->sg_mapped = 1; + dma = !hwif->dma_ops->dma_setup(drive); + if (drive->scsi) + hwif->sg_mapped = 0; + } + + if (!dma) + pc->flags &= ~PC_FLAG_DMA_OK; + + ide_pktcmd_tf_load(drive, drive->scsi ? 0 : IDE_TFLAG_OUT_DEVICE, + bcount, dma); + + /* Issue the packet command */ + if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { + ide_execute_command(drive, WIN_PACKETCMD, handler, + timeout, NULL); + return ide_started; + } else { + ide_execute_pkt_cmd(drive); + return (*handler)(drive); + } +} +EXPORT_SYMBOL_GPL(ide_issue_pc); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 13f650fa2125..e658aafc51da 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -576,9 +576,6 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc) { idefloppy_floppy_t *floppy = drive->driver_data; - ide_hwif_t *hwif = drive->hwif; - u16 bcount; - u8 dma; if (floppy->failed_pc == NULL && pc->c[0] != GPCMD_REQUEST_SENSE) @@ -600,37 +597,9 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, debug_log("Retry number - %d\n", pc->retries); pc->retries++; - /* We haven't transferred any data yet */ - pc->xferred = 0; - pc->cur_pos = pc->buf; - bcount = min(pc->req_xfer, 63 * 1024); - - if (pc->flags & PC_FLAG_DMA_ERROR) { - pc->flags &= ~PC_FLAG_DMA_ERROR; - ide_dma_off(drive); - } - dma = 0; - if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) - dma = !hwif->dma_ops->dma_setup(drive); - - if (!dma) - pc->flags &= ~PC_FLAG_DMA_OK; - - ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma); - - if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { - /* Issue the packet command */ - ide_execute_command(drive, WIN_PACKETCMD, - &idefloppy_transfer_pc1, - IDEFLOPPY_WAIT_CMD, - NULL); - return ide_started; - } else { - /* Issue the packet command */ - ide_execute_pkt_cmd(drive); - return idefloppy_transfer_pc1(drive); - } + return ide_issue_pc(drive, pc, idefloppy_transfer_pc1, + IDEFLOPPY_WAIT_CMD, NULL); } static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index cba18a675506..7907a1e41918 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -958,10 +958,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc) { - ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - int dma_ok = 0; - u16 bcount; if (tape->pc->c[0] == REQUEST_SENSE && pc->c[0] == REQUEST_SENSE) { @@ -1002,32 +999,9 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); pc->retries++; - /* We haven't transferred any data yet */ - pc->xferred = 0; - pc->cur_pos = pc->buf; - /* Request to transfer the entire buffer at once */ - bcount = pc->req_xfer; - - if (pc->flags & PC_FLAG_DMA_ERROR) { - pc->flags &= ~PC_FLAG_DMA_ERROR; - ide_dma_off(drive); - } - if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) - dma_ok = !hwif->dma_ops->dma_setup(drive); - - if (!dma_ok) - pc->flags &= ~PC_FLAG_DMA_OK; - - ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_DEVICE, bcount, dma_ok); - if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { - ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc, - IDETAPE_WAIT_CMD, NULL); - return ide_started; - } else { - ide_execute_pkt_cmd(drive); - return idetape_transfer_pc(drive); - } + return ide_issue_pc(drive, pc, idetape_transfer_pc, + IDETAPE_WAIT_CMD, NULL); } /* A mode sense command is used to "sense" tape parameters. */ diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index b7c5e8391575..32415466fbfe 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -502,38 +502,12 @@ static ide_startstop_t idescsi_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); - ide_hwif_t *hwif = drive->hwif; - u16 bcount; - u8 dma = 0; /* Set the current packet command */ scsi->pc = pc; - /* We haven't transferred any data yet */ - pc->xferred = 0; - pc->cur_pos = pc->buf; - /* Request to transfer the entire buffer at once */ - bcount = min(pc->req_xfer, 63 * 1024); - - if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) { - hwif->sg_mapped = 1; - dma = !hwif->dma_ops->dma_setup(drive); - hwif->sg_mapped = 0; - } - - if (!dma) - pc->flags &= ~PC_FLAG_DMA_OK; - ide_pktcmd_tf_load(drive, 0, bcount, dma); - - if (pc->flags & PC_FLAG_DRQ_INTERRUPT) { - ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc, - get_timeout(pc), idescsi_expiry); - return ide_started; - } else { - /* Issue the packet command */ - ide_execute_pkt_cmd(drive); - return idescsi_transfer_pc(drive); - } + return ide_issue_pc(drive, pc, idescsi_transfer_pc, + get_timeout(pc), idescsi_expiry); } /* diff --git a/include/linux/ide.h b/include/linux/ide.h index c2274ad44b2e..fee07a7edb19 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -970,6 +970,8 @@ void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *, ide_handler_t *, unsigned int, ide_expiry_t *); +ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_atapi_pc *, + ide_handler_t *, unsigned int, ide_expiry_t *); ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *); -- cgit v1.2.3 From dd2e9a032bc552f6e2ae852e81cde602c09d7d3e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:01 +0200 Subject: ide-{floppy,tape}: move checking of ->failed_pc to ->callback Move checking/resetting of ->failed_pc from ide*_pc_intr() to ->callback as a preparation for adding generic ide_pc_intr() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- --- drivers/ide/ide-floppy.c | 5 +++-- drivers/ide/ide-tape.c | 7 +++---- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index e658aafc51da..b1d6905fd8ea 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -320,6 +320,9 @@ static void ide_floppy_callback(ide_drive_t *drive) debug_log("Reached %s\n", __func__); + if (floppy->failed_pc == pc) + floppy->failed_pc = NULL; + if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 || (pc->rq && blk_pc_request(pc->rq))) uptodate = 1; /* FIXME */ @@ -435,8 +438,6 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) return ide_stopped; } pc->error = 0; - if (floppy->failed_pc == pc) - floppy->failed_pc = NULL; /* Command finished - Call the callback function */ pc->callback(drive); return ide_stopped; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 7907a1e41918..0fec58ebee85 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -627,6 +627,9 @@ static void ide_tape_callback(ide_drive_t *drive) debug_log(DBG_PROCS, "Enter %s\n", __func__); + if (tape->failed_pc == pc) + tape->failed_pc = NULL; + if (pc->c[0] == REQUEST_SENSE) { if (uptodate) idetape_analyze_error(drive, pc->buf); @@ -838,8 +841,6 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) idetape_postpone_request(drive); return ide_stopped; } - if (tape->failed_pc == pc) - tape->failed_pc = NULL; /* Command finished - Call the callback function */ pc->callback(drive); return ide_stopped; @@ -1050,8 +1051,6 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) return ide_stopped; } pc->error = 0; - if (tape->failed_pc == pc) - tape->failed_pc = NULL; } else { pc->error = IDETAPE_ERROR_GENERAL; tape->failed_pc = NULL; -- cgit v1.2.3 From 74e63e74ea57e06839aa5fcf016eace35da26050 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:01 +0200 Subject: ide-tape: factor out DSC handling from idetape_pc_intr() Factor out DSC handling from idetape_pc_intr() to ide_tape_handle_dsc() helper as a preparation for adding generic ide_pc_intr() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 0fec58ebee85..b224823a8ae7 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -768,6 +768,18 @@ static void idetape_postpone_request(ide_drive_t *drive) ide_stall_queue(drive, tape->dsc_poll_freq); } +static void ide_tape_handle_dsc(ide_drive_t *drive) +{ + idetape_tape_t *tape = drive->driver_data; + + /* Media access command */ + tape->dsc_polling_start = jiffies; + tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST; + tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT; + /* Allow ide.c to handle other requests */ + idetape_postpone_request(drive); +} + typedef void idetape_io_buf(ide_drive_t *, struct ide_atapi_pc *, unsigned int); /* @@ -833,12 +845,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) pc->error = 0; if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & SEEK_STAT) == 0) { - /* Media access command */ - tape->dsc_polling_start = jiffies; - tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST; - tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT; - /* Allow ide.c to handle other requests */ - idetape_postpone_request(drive); + ide_tape_handle_dsc(drive); return ide_stopped; } /* Command finished - Call the callback function */ -- cgit v1.2.3 From 08424ac24a35b505463919a897b097f27e4dca96 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:01 +0200 Subject: ide-tape: add ide_tape_io_buffers() helper * Add ide_tape_io_buffers() helper which is a wrapper for idetape_{in,out}put_buffers() and convert idetape_pc_intr() to use it. * Remove no longer used idetape_io_buf typedef. There should be no functional changes caused by this patch. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- --- drivers/ide/ide-tape.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b224823a8ae7..6801c68ee7da 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -780,7 +780,14 @@ static void ide_tape_handle_dsc(ide_drive_t *drive) idetape_postpone_request(drive); } -typedef void idetape_io_buf(ide_drive_t *, struct ide_atapi_pc *, unsigned int); +static void ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, + unsigned int bcount, int write) +{ + if (write) + idetape_output_buffers(drive, pc, bcount); + else + idetape_input_buffers(drive, pc, bcount); +} /* * This is the usual interrupt handler which will be called during a packet @@ -795,7 +802,6 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc *pc = tape->pc; xfer_func_t *xferfunc; - idetape_io_buf *iobuf; unsigned int temp; u16 bcount; u8 stat, ireason; @@ -895,15 +901,14 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) debug_log(DBG_SENSE, "The device wants to send us more " "data than expected - allowing transfer\n"); } - iobuf = &idetape_input_buffers; xferfunc = hwif->input_data; } else { - iobuf = &idetape_output_buffers; xferfunc = hwif->output_data; } if (pc->bh) - iobuf(drive, pc, bcount); + ide_tape_io_buffers(drive, pc, bcount, + !!(pc->flags & PC_FLAG_WRITING)); else xferfunc(drive, NULL, pc->cur_pos, bcount); -- cgit v1.2.3 From 3e421d324c003f8f002f402141b15d758adbfaef Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:01 +0200 Subject: ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled Add DBG_PC_INTR debug level and use it to always log debug info in idetape_pc_intr() if debugging is enabled. While at it: * Use drive->name instead of tape->name. * Log device name with "DMA finished" message. This is a preparation for adding generic ide_pc_intr() helper. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 6801c68ee7da..10f2d3336286 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -56,6 +56,8 @@ enum { DBG_PROCS = (1 << 3), /* buffer alloc info (pc_stack & rq_stack) */ DBG_PCRQ_STACK = (1 << 4), + /* IRQ handler (always log debug info if debugging is on) */ + DBG_PC_INTR = (1 << 5), }; /* define to see debug info */ @@ -64,7 +66,7 @@ enum { #if IDETAPE_DEBUG_LOG #define debug_log(lvl, fmt, args...) \ { \ - if (tape->debug_mask & lvl) \ + if ((lvl & DBG_PC_INTR) || (tape->debug_mask & lvl)) \ printk(KERN_INFO "ide-tape: " fmt, ## args); \ } #else @@ -806,7 +808,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) u16 bcount; u8 stat, ireason; - debug_log(DBG_PROCS, "Enter %s - interrupt handler\n", __func__); + debug_log(DBG_PC_INTR, "Enter %s - interrupt handler\n", __func__); /* Clear the interrupt */ stat = ide_read_status(drive); @@ -818,13 +820,12 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) pc->xferred = pc->req_xfer; idetape_update_buffers(pc); } - debug_log(DBG_PROCS, "DMA finished\n"); - + debug_log(DBG_PC_INTR, "%s: DMA finished\n", drive->name); } /* No more interrupts */ if ((stat & DRQ_STAT) == 0) { - debug_log(DBG_SENSE, "Packet command completed, %d bytes" + debug_log(DBG_PC_INTR, "Packet command completed, %d bytes" " transferred\n", pc->xferred); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; @@ -834,14 +835,14 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) stat &= ~ERR_STAT; if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { /* Error detected */ - debug_log(DBG_ERR, "%s: I/O error\n", tape->name); + debug_log(DBG_PC_INTR, "%s: I/O error\n", drive->name); if (pc->c[0] == REQUEST_SENSE) { printk(KERN_ERR "%s: I/O error in request sense" " command\n", drive->name); return ide_do_reset(drive); } - debug_log(DBG_ERR, "[cmd %x]: check condition\n", + debug_log(DBG_PC_INTR, "[cmd %x]: check condition\n", pc->c[0]); /* Retry operation */ @@ -898,7 +899,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) IDETAPE_WAIT_CMD, NULL); return ide_started; } - debug_log(DBG_SENSE, "The device wants to send us more " + debug_log(DBG_PC_INTR, "The device wants to send us more " "data than expected - allowing transfer\n"); } xferfunc = hwif->input_data; @@ -916,7 +917,7 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) pc->xferred += bcount; pc->cur_pos += bcount; - debug_log(DBG_SENSE, "[cmd %x] transferred %d bytes on that intr.\n", + debug_log(DBG_PC_INTR, "[cmd %x] transferred %d bytes on that intr.\n", pc->c[0], bcount); /* And set the interrupt handler again */ -- cgit v1.2.3 From 4c93067ea9e5eca9d975bec74dae641228ac1bbe Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:02 +0200 Subject: ide-floppy: add more debugging to idefloppy_pc_intr() Add more debugging to idefloppy_pc_intr() to match ide-tape's idetape_pc_intr(). While at it: * Correct the first debug message. * Log device name with "DMA finished" message. This is a preparation for adding generic ide_pc_intr() helper. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index b1d6905fd8ea..502ef9dcc5b9 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -397,7 +397,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) u16 bcount; u8 stat, ireason; - debug_log("Reached %s interrupt handler\n", __func__); + debug_log("Enter %s - interrupt handler\n", __func__); if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { dma_error = hwif->dma_ops->dma_end(drive); @@ -409,7 +409,7 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) pc->xferred = pc->req_xfer; idefloppy_update_buffers(drive, pc); } - debug_log("DMA finished\n"); + debug_log("%s: DMA finished\n", drive->name); } /* Clear the interrupt */ @@ -432,6 +432,9 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) " command\n", drive->name); return ide_do_reset(drive); } + + debug_log("[cmd %x]: check condition\n", pc->c[0]); + /* Retry operation */ idefloppy_retry_pc(drive); /* queued, but not started */ @@ -505,6 +508,9 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) pc->xferred += bcount; pc->cur_pos += bcount; + debug_log("[cmd %x] transferred %d bytes on that intr.\n", + pc->c[0], bcount); + /* And set the interrupt handler again */ ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); return ide_started; -- cgit v1.2.3 From c6b2d260b5a7a5ed32aa2ce370d81183fc37eeb1 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:02 +0200 Subject: ide-scsi: use pc->callback * Add ide_scsi_callback() pc->callback implementation, then update idescsi_check_condition() and idescsi_queue() to setup ->callback. * Convert idescsi_pc_intr() to use pc->callback. This is a preparation for adding generic ide_pc_intr() helper. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 32 ++++++++++++++++++++++---------- 1 file changed, 22 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 32415466fbfe..c0b39b9e5c14 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -183,6 +183,24 @@ static void ide_scsi_hex_dump(u8 *data, int len) print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0); } +static int idescsi_end_request(ide_drive_t *, int, int); + +static void ide_scsi_callback(ide_drive_t *drive) +{ + idescsi_scsi_t *scsi = drive_to_idescsi(drive); + struct ide_atapi_pc *pc = scsi->pc; + + if (pc->flags & PC_FLAG_TIMEDOUT) + debug_log("%s: got timed out packet %lu at %lu\n", __func__, + pc->scsi_cmd->serial_number, jiffies); + /* end this request now - scsi should retry it*/ + else if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) + printk(KERN_INFO "Packet command completed, %d bytes" + " transferred\n", pc->xferred); + + idescsi_end_request(drive, 1, 0); +} + static int idescsi_check_condition(ide_drive_t *drive, struct request *failed_cmd) { @@ -210,6 +228,7 @@ static int idescsi_check_condition(ide_drive_t *drive, rq->cmd_type = REQ_TYPE_SENSE; rq->cmd_flags |= REQ_PREEMPT; pc->timeout = jiffies + WAIT_READY; + pc->callback = ide_scsi_callback; /* NOTE! Save the failed packet command in "rq->buffer" */ rq->buffer = (void *) failed_cmd->special; pc->scsi_cmd = ((struct ide_atapi_pc *) failed_cmd->special)->scsi_cmd; @@ -222,8 +241,6 @@ static int idescsi_check_condition(ide_drive_t *drive, return 0; } -static int idescsi_end_request(ide_drive_t *, int, int); - static ide_startstop_t idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) { @@ -350,10 +367,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) debug_log("Reached %s interrupt handler\n", __func__); if (pc->flags & PC_FLAG_TIMEDOUT) { - debug_log("%s: got timed out packet %lu at %lu\n", __func__, - pc->scsi_cmd->serial_number, jiffies); - /* end this request now - scsi should retry it*/ - idescsi_end_request (drive, 1, 0); + pc->callback(drive); return ide_stopped; } if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { @@ -369,14 +383,11 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ - if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) - printk(KERN_INFO "Packet command completed, %d bytes" - " transferred\n", pc->xferred); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) rq->errors++; - idescsi_end_request (drive, 1, 0); + pc->callback(drive); return ide_stopped; } if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { @@ -718,6 +729,7 @@ static int idescsi_queue (struct scsi_cmnd *cmd, pc->scsi_cmd = cmd; pc->done = done; pc->timeout = jiffies + cmd->timeout_per_command; + pc->callback = ide_scsi_callback; if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) { printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number); -- cgit v1.2.3 From cdca5c1f3b769eb2cdfc9cadc254cb74ba73c7d6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:02 +0200 Subject: ide-scsi: add more debugging to idescsi_pc_intr() Add more debugging to idescsi_pc_intr() to match ide-tape's idetape_pc_intr(). While at it: * Correct the first debug message. This is a preparation for adding generic ide_pc_intr() helper. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index c0b39b9e5c14..ec9a5de2e75e 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -364,7 +364,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) u16 bcount; u8 stat, ireason; - debug_log("Reached %s interrupt handler\n", __func__); + debug_log("Enter %s - interrupt handler\n", __func__); if (pc->flags & PC_FLAG_TIMEDOUT) { pc->callback(drive); @@ -383,10 +383,16 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ + debug_log("Packet command completed, %d bytes transferred\n", + pc->xferred); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); - if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) + if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { + /* Error detected */ + debug_log("%s: I/O error\n", drive->name); + rq->errors++; + } pc->callback(drive); return ide_stopped; } @@ -457,6 +463,9 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) pc->xferred += bcount; pc->cur_pos += bcount; + debug_log("[cmd %x] transferred %d bytes on that intr.\n", + pc->c[0], bcount); + /* And set the interrupt handler again */ ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); return ide_started; -- cgit v1.2.3 From 55d82bfa6763d6761670d740ab3bac2f1c042d87 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:03 +0200 Subject: ide-{floppy,scsi}: read Status Register before stopping DMA engine Read Status Register before stopping DMA engine to match ide-tape device driver - it should be safe and shouldn't affect anything. This is a preparation for adding generic ide_pc_intr() helper. Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 6 +++--- drivers/scsi/ide-scsi.c | 7 ++++--- 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 502ef9dcc5b9..70aef97fb8bc 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -399,6 +399,9 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) debug_log("Enter %s - interrupt handler\n", __func__); + /* Clear the interrupt */ + stat = ide_read_status(drive); + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { dma_error = hwif->dma_ops->dma_end(drive); if (dma_error) { @@ -412,9 +415,6 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) debug_log("%s: DMA finished\n", drive->name); } - /* Clear the interrupt */ - stat = ide_read_status(drive); - /* No more interrupts */ if ((stat & DRQ_STAT) == 0) { debug_log("Packet command completed, %d bytes transferred\n", diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index ec9a5de2e75e..ada733ca6725 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -370,6 +370,10 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) pc->callback(drive); return ide_stopped; } + + /* Clear the interrupt */ + stat = ide_read_status(drive); + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { if (hwif->dma_ops->dma_end(drive)) pc->flags |= PC_FLAG_DMA_ERROR; @@ -378,9 +382,6 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) debug_log("%s: DMA finished\n", drive->name); } - /* Clear the interrupt */ - stat = ide_read_status(drive); - if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ debug_log("Packet command completed, %d bytes transferred\n", -- cgit v1.2.3 From 646c0cb6c430f8d3ad3769dd1518fe664ff0ce27 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 15 Jul 2008 21:22:03 +0200 Subject: ide: add ide_pc_intr() helper * ide-tape.c: add 'drive' argument to idetape_update_buffers(). * Add generic ide_pc_intr() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. * ide-tape.c: remove no longer needed DBG_PC_INTR. There should be no functional changes caused by this patch (unless the debugging is explicitely compiled in). Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-atapi.c | 177 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/ide/ide-floppy.c | 128 +--------------------------------- drivers/ide/ide-tape.c | 132 ++--------------------------------- drivers/scsi/ide-scsi.c | 115 +----------------------------- include/linux/ide.h | 6 ++ 5 files changed, 195 insertions(+), 363 deletions(-) diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c index 932a83abaf06..2802031de670 100644 --- a/drivers/ide/ide-atapi.c +++ b/drivers/ide/ide-atapi.c @@ -5,6 +5,183 @@ #include #include #include +#include + +#ifdef DEBUG +#define debug_log(fmt, args...) \ + printk(KERN_INFO "ide: " fmt, ## args) +#else +#define debug_log(fmt, args...) do {} while (0) +#endif + +/* TODO: unify the code thus making some arguments go away */ +ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc, + ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry, + void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *), + void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *), + void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int)) +{ + ide_hwif_t *hwif = drive->hwif; + xfer_func_t *xferfunc; + unsigned int temp; + u16 bcount; + u8 stat, ireason, scsi = drive->scsi; + + debug_log("Enter %s - interrupt handler\n", __func__); + + if (pc->flags & PC_FLAG_TIMEDOUT) { + pc->callback(drive); + return ide_stopped; + } + + /* Clear the interrupt */ + stat = ide_read_status(drive); + + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + if (hwif->dma_ops->dma_end(drive) || + (drive->media == ide_tape && !scsi && (stat & ERR_STAT))) { + if (drive->media == ide_floppy && !scsi) + printk(KERN_ERR "%s: DMA %s error\n", + drive->name, rq_data_dir(pc->rq) + ? "write" : "read"); + pc->flags |= PC_FLAG_DMA_ERROR; + } else { + pc->xferred = pc->req_xfer; + if (update_buffers) + update_buffers(drive, pc); + } + debug_log("%s: DMA finished\n", drive->name); + } + + /* No more interrupts */ + if ((stat & DRQ_STAT) == 0) { + debug_log("Packet command completed, %d bytes transferred\n", + pc->xferred); + + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; + + local_irq_enable_in_hardirq(); + + if (drive->media == ide_tape && !scsi && + (stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE) + stat &= ~ERR_STAT; + if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { + /* Error detected */ + debug_log("%s: I/O error\n", drive->name); + + if (drive->media != ide_tape || scsi) { + pc->rq->errors++; + if (scsi) + goto cmd_finished; + } + + if (pc->c[0] == REQUEST_SENSE) { + printk(KERN_ERR "%s: I/O error in request sense" + " command\n", drive->name); + return ide_do_reset(drive); + } + + debug_log("[cmd %x]: check condition\n", pc->c[0]); + + /* Retry operation */ + retry_pc(drive); + /* queued, but not started */ + return ide_stopped; + } +cmd_finished: + pc->error = 0; + if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && + (stat & SEEK_STAT) == 0) { + dsc_handle(drive); + return ide_stopped; + } + /* Command finished - Call the callback function */ + pc->callback(drive); + return ide_stopped; + } + + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; + printk(KERN_ERR "%s: The device wants to issue more interrupts " + "in DMA mode\n", drive->name); + ide_dma_off(drive); + return ide_do_reset(drive); + } + /* Get the number of bytes to transfer on this interrupt. */ + bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | + hwif->INB(hwif->io_ports.lbam_addr); + + ireason = hwif->INB(hwif->io_ports.nsect_addr); + + if (ireason & CD) { + printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); + return ide_do_reset(drive); + } + if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { + /* Hopefully, we will never get here */ + printk(KERN_ERR "%s: We wanted to %s, but the device wants us " + "to %s!\n", drive->name, + (ireason & IO) ? "Write" : "Read", + (ireason & IO) ? "Read" : "Write"); + return ide_do_reset(drive); + } + if (!(pc->flags & PC_FLAG_WRITING)) { + /* Reading - Check that we have enough space */ + temp = pc->xferred + bcount; + if (temp > pc->req_xfer) { + if (temp > pc->buf_size) { + printk(KERN_ERR "%s: The device wants to send " + "us more data than expected - " + "discarding data\n", + drive->name); + if (scsi) + temp = pc->buf_size - pc->xferred; + else + temp = 0; + if (temp) { + if (pc->sg) + io_buffers(drive, pc, temp, 0); + else + hwif->input_data(drive, NULL, + pc->cur_pos, temp); + printk(KERN_ERR "%s: transferred %d of " + "%d bytes\n", + drive->name, + temp, bcount); + } + pc->xferred += temp; + pc->cur_pos += temp; + ide_pad_transfer(drive, 0, bcount - temp); + ide_set_handler(drive, handler, timeout, + expiry); + return ide_started; + } + debug_log("The device wants to send us more data than " + "expected - allowing transfer\n"); + } + xferfunc = hwif->input_data; + } else + xferfunc = hwif->output_data; + + if ((drive->media == ide_floppy && !scsi && !pc->buf) || + (drive->media == ide_tape && !scsi && pc->bh) || + (scsi && pc->sg)) + io_buffers(drive, pc, bcount, !!(pc->flags & PC_FLAG_WRITING)); + else + xferfunc(drive, NULL, pc->cur_pos, bcount); + + /* Update the current position */ + pc->xferred += bcount; + pc->cur_pos += bcount; + + debug_log("[cmd %x] transferred %d bytes on that intr.\n", + pc->c[0], bcount); + + /* And set the interrupt handler again */ + ide_set_handler(drive, handler, timeout, expiry); + return ide_started; +} +EXPORT_SYMBOL_GPL(ide_pc_intr); static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason) { diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 70aef97fb8bc..0f3602a5efb0 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -388,132 +388,10 @@ static void idefloppy_retry_pc(ide_drive_t *drive) static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - ide_hwif_t *hwif = drive->hwif; - struct ide_atapi_pc *pc = floppy->pc; - struct request *rq = pc->rq; - xfer_func_t *xferfunc; - unsigned int temp; - int dma_error = 0; - u16 bcount; - u8 stat, ireason; - - debug_log("Enter %s - interrupt handler\n", __func__); - - /* Clear the interrupt */ - stat = ide_read_status(drive); - - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - dma_error = hwif->dma_ops->dma_end(drive); - if (dma_error) { - printk(KERN_ERR "%s: DMA %s error\n", drive->name, - rq_data_dir(rq) ? "write" : "read"); - pc->flags |= PC_FLAG_DMA_ERROR; - } else { - pc->xferred = pc->req_xfer; - idefloppy_update_buffers(drive, pc); - } - debug_log("%s: DMA finished\n", drive->name); - } - - /* No more interrupts */ - if ((stat & DRQ_STAT) == 0) { - debug_log("Packet command completed, %d bytes transferred\n", - pc->xferred); - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - - local_irq_enable_in_hardirq(); - - if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { - /* Error detected */ - debug_log("%s: I/O error\n", drive->name); - rq->errors++; - if (pc->c[0] == GPCMD_REQUEST_SENSE) { - printk(KERN_ERR "%s: I/O error in request sense" - " command\n", drive->name); - return ide_do_reset(drive); - } - - debug_log("[cmd %x]: check condition\n", pc->c[0]); - - /* Retry operation */ - idefloppy_retry_pc(drive); - /* queued, but not started */ - return ide_stopped; - } - pc->error = 0; - /* Command finished - Call the callback function */ - pc->callback(drive); - return ide_stopped; - } - - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - printk(KERN_ERR "%s: The device wants to issue more interrupts " - "in DMA mode\n", drive->name); - ide_dma_off(drive); - return ide_do_reset(drive); - } - - /* Get the number of bytes to transfer */ - bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | - hwif->INB(hwif->io_ports.lbam_addr); - /* on this interrupt */ - ireason = hwif->INB(hwif->io_ports.nsect_addr); - - if (ireason & CD) { - printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); - return ide_do_reset(drive); - } - if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { - /* Hopefully, we will never get here */ - printk(KERN_ERR "%s: We wanted to %s, but the device wants us " - "to %s!\n", drive->name, - (ireason & IO) ? "Write" : "Read", - (ireason & IO) ? "Read" : "Write"); - return ide_do_reset(drive); - } - if (!(pc->flags & PC_FLAG_WRITING)) { - /* Reading - Check that we have enough space */ - temp = pc->xferred + bcount; - if (temp > pc->req_xfer) { - if (temp > pc->buf_size) { - printk(KERN_ERR "%s: The device wants to send " - "us more data than expected - " - "discarding data\n", - drive->name); - ide_pad_transfer(drive, 0, bcount); - - ide_set_handler(drive, - &idefloppy_pc_intr, - IDEFLOPPY_WAIT_CMD, - NULL); - return ide_started; - } - debug_log("The device wants to send us more data than " - "expected - allowing transfer\n"); - } - } - if (pc->flags & PC_FLAG_WRITING) - xferfunc = hwif->output_data; - else - xferfunc = hwif->input_data; - - if (pc->buf) - xferfunc(drive, NULL, pc->cur_pos, bcount); - else - ide_floppy_io_buffers(drive, pc, bcount, - !!(pc->flags & PC_FLAG_WRITING)); - - /* Update the current position */ - pc->xferred += bcount; - pc->cur_pos += bcount; - - debug_log("[cmd %x] transferred %d bytes on that intr.\n", - pc->c[0], bcount); - /* And set the interrupt handler again */ - ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); - return ide_started; + return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr, + IDEFLOPPY_WAIT_CMD, NULL, idefloppy_update_buffers, + idefloppy_retry_pc, NULL, ide_floppy_io_buffers); } /* diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 10f2d3336286..0afa109ec99a 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -56,8 +56,6 @@ enum { DBG_PROCS = (1 << 3), /* buffer alloc info (pc_stack & rq_stack) */ DBG_PCRQ_STACK = (1 << 4), - /* IRQ handler (always log debug info if debugging is on) */ - DBG_PC_INTR = (1 << 5), }; /* define to see debug info */ @@ -66,7 +64,7 @@ enum { #if IDETAPE_DEBUG_LOG #define debug_log(lvl, fmt, args...) \ { \ - if ((lvl & DBG_PC_INTR) || (tape->debug_mask & lvl)) \ + if (tape->debug_mask & lvl) \ printk(KERN_INFO "ide-tape: " fmt, ## args); \ } #else @@ -441,7 +439,7 @@ static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, } } -static void idetape_update_buffers(struct ide_atapi_pc *pc) +static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc) { struct idetape_bh *bh = pc->bh; int count; @@ -526,7 +524,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) pc->xferred = pc->req_xfer - tape->blk_size * get_unaligned_be32(&sense[3]); - idetape_update_buffers(pc); + idetape_update_buffers(drive, pc); } /* @@ -800,129 +798,11 @@ static void ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc, */ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) { - ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; - struct ide_atapi_pc *pc = tape->pc; - xfer_func_t *xferfunc; - unsigned int temp; - u16 bcount; - u8 stat, ireason; - - debug_log(DBG_PC_INTR, "Enter %s - interrupt handler\n", __func__); - - /* Clear the interrupt */ - stat = ide_read_status(drive); - - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - if (hwif->dma_ops->dma_end(drive) || (stat & ERR_STAT)) { - pc->flags |= PC_FLAG_DMA_ERROR; - } else { - pc->xferred = pc->req_xfer; - idetape_update_buffers(pc); - } - debug_log(DBG_PC_INTR, "%s: DMA finished\n", drive->name); - } - - /* No more interrupts */ - if ((stat & DRQ_STAT) == 0) { - debug_log(DBG_PC_INTR, "Packet command completed, %d bytes" - " transferred\n", pc->xferred); - - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - local_irq_enable_in_hardirq(); - - if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE) - stat &= ~ERR_STAT; - if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { - /* Error detected */ - debug_log(DBG_PC_INTR, "%s: I/O error\n", drive->name); - - if (pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "%s: I/O error in request sense" - " command\n", drive->name); - return ide_do_reset(drive); - } - debug_log(DBG_PC_INTR, "[cmd %x]: check condition\n", - pc->c[0]); - - /* Retry operation */ - idetape_retry_pc(drive); - return ide_stopped; - } - pc->error = 0; - if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && - (stat & SEEK_STAT) == 0) { - ide_tape_handle_dsc(drive); - return ide_stopped; - } - /* Command finished - Call the callback function */ - pc->callback(drive); - return ide_stopped; - } - - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - printk(KERN_ERR "%s: The device wants to issue more interrupts " - "in DMA mode\n", drive->name); - ide_dma_off(drive); - return ide_do_reset(drive); - } - /* Get the number of bytes to transfer on this interrupt. */ - bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | - hwif->INB(hwif->io_ports.lbam_addr); - - ireason = hwif->INB(hwif->io_ports.nsect_addr); - - if (ireason & CD) { - printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); - return ide_do_reset(drive); - } - if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { - /* Hopefully, we will never get here */ - printk(KERN_ERR "%s: We wanted to %s, but the device wants us " - "to %s!\n", drive->name, - (ireason & IO) ? "Write" : "Read", - (ireason & IO) ? "Read" : "Write"); - return ide_do_reset(drive); - } - if (!(pc->flags & PC_FLAG_WRITING)) { - /* Reading - Check that we have enough space */ - temp = pc->xferred + bcount; - if (temp > pc->req_xfer) { - if (temp > pc->buf_size) { - printk(KERN_ERR "%s: The device wants to send " - "us more data than expected - " - "discarding data\n", - drive->name); - ide_pad_transfer(drive, 0, bcount); - ide_set_handler(drive, &idetape_pc_intr, - IDETAPE_WAIT_CMD, NULL); - return ide_started; - } - debug_log(DBG_PC_INTR, "The device wants to send us more " - "data than expected - allowing transfer\n"); - } - xferfunc = hwif->input_data; - } else { - xferfunc = hwif->output_data; - } - - if (pc->bh) - ide_tape_io_buffers(drive, pc, bcount, - !!(pc->flags & PC_FLAG_WRITING)); - else - xferfunc(drive, NULL, pc->cur_pos, bcount); - - /* Update the current position */ - pc->xferred += bcount; - pc->cur_pos += bcount; - - debug_log(DBG_PC_INTR, "[cmd %x] transferred %d bytes on that intr.\n", - pc->c[0], bcount); - /* And set the interrupt handler again */ - ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); - return ide_started; + return ide_pc_intr(drive, tape->pc, idetape_pc_intr, IDETAPE_WAIT_CMD, + NULL, idetape_update_buffers, idetape_retry_pc, + ide_tape_handle_dsc, ide_tape_io_buffers); } /* diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index ada733ca6725..683bce375c74 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -356,120 +356,11 @@ static int idescsi_expiry(ide_drive_t *drive) static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); - ide_hwif_t *hwif = drive->hwif; struct ide_atapi_pc *pc = scsi->pc; - struct request *rq = pc->rq; - xfer_func_t *xferfunc; - unsigned int temp; - u16 bcount; - u8 stat, ireason; - - debug_log("Enter %s - interrupt handler\n", __func__); - - if (pc->flags & PC_FLAG_TIMEDOUT) { - pc->callback(drive); - return ide_stopped; - } - - /* Clear the interrupt */ - stat = ide_read_status(drive); - - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - if (hwif->dma_ops->dma_end(drive)) - pc->flags |= PC_FLAG_DMA_ERROR; - else - pc->xferred = pc->req_xfer; - debug_log("%s: DMA finished\n", drive->name); - } - - if ((stat & DRQ_STAT) == 0) { - /* No more interrupts */ - debug_log("Packet command completed, %d bytes transferred\n", - pc->xferred); - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - local_irq_enable_in_hardirq(); - if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { - /* Error detected */ - debug_log("%s: I/O error\n", drive->name); - - rq->errors++; - } - pc->callback(drive); - return ide_stopped; - } - if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { - pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; - printk(KERN_ERR "%s: The device wants to issue more interrupts " - "in DMA mode\n", drive->name); - ide_dma_off(drive); - return ide_do_reset(drive); - } - bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) | - hwif->INB(hwif->io_ports.lbam_addr); - ireason = hwif->INB(hwif->io_ports.nsect_addr); - - if (ireason & CD) { - printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__); - return ide_do_reset (drive); - } - if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { - /* Hopefully, we will never get here */ - printk(KERN_ERR "%s: We wanted to %s, but the device wants us " - "to %s!\n", drive->name, - (ireason & IO) ? "Write" : "Read", - (ireason & IO) ? "Read" : "Write"); - return ide_do_reset(drive); - } - if (!(pc->flags & PC_FLAG_WRITING)) { - temp = pc->xferred + bcount; - if (temp > pc->req_xfer) { - if (temp > pc->buf_size) { - printk(KERN_ERR "%s: The device wants to send " - "us more data than expected - " - "discarding data\n", - drive->name); - temp = pc->buf_size - pc->xferred; - if (temp) { - if (pc->sg) - ide_scsi_io_buffers(drive, pc, - temp, 0); - else - hwif->input_data(drive, NULL, - pc->cur_pos, temp); - printk(KERN_ERR "%s: transferred %d of " - "%d bytes\n", - drive->name, - temp, bcount); - } - pc->xferred += temp; - pc->cur_pos += temp; - ide_pad_transfer(drive, 0, bcount - temp); - ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); - return ide_started; - } - debug_log("The device wants to send us more data than " - "expected - allowing transfer\n"); - } - xferfunc = hwif->input_data; - } else - xferfunc = hwif->output_data; - - if (pc->sg) - ide_scsi_io_buffers(drive, pc, bcount, - !!(pc->flags & PC_FLAG_WRITING)); - else - xferfunc(drive, NULL, pc->cur_pos, bcount); - - /* Update the current position */ - pc->xferred += bcount; - pc->cur_pos += bcount; - - debug_log("[cmd %x] transferred %d bytes on that intr.\n", - pc->c[0], bcount); - /* And set the interrupt handler again */ - ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry); - return ide_started; + return ide_pc_intr(drive, pc, idescsi_pc_intr, get_timeout(pc), + idescsi_expiry, NULL, NULL, NULL, + ide_scsi_io_buffers); } static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive) diff --git a/include/linux/ide.h b/include/linux/ide.h index fee07a7edb19..ac4eeb2932ef 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -968,6 +968,12 @@ extern int drive_is_ready(ide_drive_t *); void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); +ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc, + ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry, + void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *), + void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *), + void (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned int, + int)); ide_startstop_t ide_transfer_pc(ide_drive_t *, struct ide_atapi_pc *, ide_handler_t *, unsigned int, ide_expiry_t *); ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_atapi_pc *, -- cgit v1.2.3 From cd2abbfec84f43db740483daf4ea528d49d8858f Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 15 Jul 2008 21:22:03 +0200 Subject: ide-tape: unify idetape_create_read/write_cmd A straightforward one. There should be no functional change resulting from this change. [bart: minor fixups] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 45 ++++++++++++++++++--------------------------- 1 file changed, 18 insertions(+), 27 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 0afa109ec99a..6e1233bdf3a0 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -952,40 +952,29 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) return ide_stopped; } -static void idetape_create_read_cmd(idetape_tape_t *tape, - struct ide_atapi_pc *pc, - unsigned int length, struct idetape_bh *bh) +static void ide_tape_create_rw_cmd(idetape_tape_t *tape, + struct ide_atapi_pc *pc, unsigned int length, + struct idetape_bh *bh, u8 opcode) { idetape_init_pc(pc); - pc->c[0] = READ_6; put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; pc->bh = bh; - atomic_set(&bh->b_count, 0); pc->buf = NULL; pc->buf_size = length * tape->blk_size; pc->req_xfer = pc->buf_size; if (pc->req_xfer == tape->buffer_size) pc->flags |= PC_FLAG_DMA_OK; -} -static void idetape_create_write_cmd(idetape_tape_t *tape, - struct ide_atapi_pc *pc, - unsigned int length, struct idetape_bh *bh) -{ - idetape_init_pc(pc); - pc->c[0] = WRITE_6; - put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); - pc->c[1] = 1; - pc->flags |= PC_FLAG_WRITING; - pc->bh = bh; - pc->b_data = bh->b_data; - pc->b_count = atomic_read(&bh->b_count); - pc->buf = NULL; - pc->buf_size = length * tape->blk_size; - pc->req_xfer = pc->buf_size; - if (pc->req_xfer == tape->buffer_size) - pc->flags |= PC_FLAG_DMA_OK; + if (opcode == READ_6) { + pc->c[0] = READ_6; + atomic_set(&bh->b_count, 0); + } else if (opcode == WRITE_6) { + pc->c[0] = WRITE_6; + pc->flags |= PC_FLAG_WRITING; + pc->b_data = bh->b_data; + pc->b_count = atomic_read(&bh->b_count); + } } static ide_startstop_t idetape_do_request(ide_drive_t *drive, @@ -1062,14 +1051,16 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } if (rq->cmd[0] & REQ_IDETAPE_READ) { pc = idetape_next_pc_storage(drive); - idetape_create_read_cmd(tape, pc, rq->current_nr_sectors, - (struct idetape_bh *)rq->special); + ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors, + (struct idetape_bh *)rq->special, + READ_6); goto out; } if (rq->cmd[0] & REQ_IDETAPE_WRITE) { pc = idetape_next_pc_storage(drive); - idetape_create_write_cmd(tape, pc, rq->current_nr_sectors, - (struct idetape_bh *)rq->special); + ide_tape_create_rw_cmd(tape, pc, rq->current_nr_sectors, + (struct idetape_bh *)rq->special, + WRITE_6); goto out; } if (rq->cmd[0] & REQ_IDETAPE_PC1) { -- cgit v1.2.3 From cbbc4e818de4451cdef75a112b7fc8a523d5d2a0 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 15 Jul 2008 21:22:03 +0200 Subject: ide-floppy: fix unfortunate function naming mv idefloppy_transfer_pc1 idefloppy_start_pc_transfer mv idefloppy_transfer_pc2 idefloppy_transfer_pc which describes their functionality and disambiguates them. There should be no functionality change introduced by this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 0f3602a5efb0..b3689437269f 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -399,12 +399,8 @@ static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive) * service routine. In interrupt mode, the device sends an interrupt to signal * that it is ready to receive a packet. However, we need to delay about 2-3 * ticks before issuing the packet or we gets in trouble. - * - * So, follow carefully. transfer_pc1 is called as an interrupt (or directly). - * In either case, when the device says it's ready for a packet, we schedule - * the packet transfer to occur about 2-3 ticks later in transfer_pc2. */ -static int idefloppy_transfer_pc2(ide_drive_t *drive) +static int idefloppy_transfer_pc(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; @@ -415,7 +411,13 @@ static int idefloppy_transfer_pc2(ide_drive_t *drive) return IDEFLOPPY_WAIT_CMD; } -static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) + +/* + * Called as an interrupt (or directly). When the device says it's ready for a + * packet, we schedule the packet transfer to occur about 2-3 ticks later in + * transfer_pc. + */ +static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; struct ide_atapi_pc *pc = floppy->pc; @@ -432,7 +434,7 @@ static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) */ if (pc->flags & PC_FLAG_ZIP_DRIVE) { timeout = floppy->ticks; - expiry = &idefloppy_transfer_pc2; + expiry = &idefloppy_transfer_pc; } else { timeout = IDEFLOPPY_WAIT_CMD; expiry = NULL; @@ -483,7 +485,7 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, pc->retries++; - return ide_issue_pc(drive, pc, idefloppy_transfer_pc1, + return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer, IDEFLOPPY_WAIT_CMD, NULL); } -- cgit v1.2.3 From d93c768e66d8c3970187c179a91a2553b077d9e8 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Tue, 15 Jul 2008 20:11:21 +0200 Subject: pcmcia: fix return value in cm4000_cs.c should be -EINVAL, not EINVAL. Found by Peter Stuge. Signed-off-by: Dominik Brodowski --- drivers/char/pcmcia/cm4000_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 59ca35156d81..e4a4fbd37d7a 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1439,7 +1439,7 @@ static long cmm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) DEBUGP(4, dev, "CMM_ABSENT flag set\n"); goto out; } - rc = EINVAL; + rc = -EINVAL; if (_IOC_TYPE(cmd) != CM_IOC_MAGIC) { DEBUGP(4, dev, "ioctype mismatch\n"); -- cgit v1.2.3 From 002b90a1bf5fe9c8de7a8634403a685621841ff3 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 15 Jul 2008 15:26:15 +0200 Subject: pcmcia: fix cisinfo_t removal The cisinfo_t removal patch (c5081d5f4775b2a3f858f91151bbf9163e473075 pcmcia: simplify pccard_validate_cis ) introduced a bug that prevented card detection, for the (info->Chains == MAX_TUPLES) check was replaced by (count), which is always true. Restoring the comparison to MAX_TUPLES makes everybody happy... [linux@dominikbrodowski.net: update changelog comment] Signed-off-by: Marc Zyngier Signed-off-by: Dominik Brodowski --- drivers/pcmcia/cistpl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index 9fcff0c33619..65129b54eb09 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -1490,7 +1490,7 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned ((tuple->TupleCode > 0x90) && (tuple->TupleCode < 0xff))) reserved++; } - if ((count) || (reserved > 5) || + if ((count == MAX_TUPLES) || (reserved > 5) || ((!dev_ok || !ident_ok) && (count > 10))) count = 0; -- cgit v1.2.3 From 417e1494fd70715b737428cc3c3d924255f22ba1 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 15 Jul 2008 11:30:00 -0500 Subject: pcmcia: ide-cs: Remove outdated comment There is an outdated version information comment in ide-cs. Signed-off-by: Larry Finger Signed-off-by: Dominik Brodowski --- drivers/ide/legacy/ide-cs.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 8dbf4d9b6447..41a2e251d53d 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -66,8 +66,6 @@ MODULE_LICENSE("Dual MPL/GPL"); #ifdef CONFIG_PCMCIA_DEBUG INT_MODULE_PARM(pc_debug, 0); #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) -/*static char *version = -"ide-cs.c 1.3 2002/10/26 05:45:31 (David Hinds)";*/ #else #define DEBUG(n, args...) #endif -- cgit v1.2.3 From b3c9816b9fa9a7b75ab36111eb76eca03e5bab78 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 15 Jul 2008 22:03:56 +0200 Subject: generic-ipi: merge fix MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix merge fallout: arch/x86/pci/amd_bus.c: In function ‘enable_pci_io_ecs': arch/x86/pci/amd_bus.c:581: error: too many arguments to function ‘on_each_cpu' Signed-off-by: Ingo Molnar --- arch/x86/pci/amd_bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index a18141ae3f02..dbf532369711 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -578,7 +578,7 @@ static int __init enable_pci_io_ecs(void) /* assume all cpus from fam10h have IO ECS */ if (boot_cpu_data.x86 < 0x10) return 0; - on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1, 1); + on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1); pci_probe |= PCI_HAS_IO_ECS; return 0; } -- cgit v1.2.3 From f6f88e9bfb6ced9871ed65ebe85c371de3c9e4be Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 15 Jul 2008 22:08:52 +0200 Subject: generic-ipi: more merge fallout fix more API change fallout in recently merged upstream changes. Signed-off-by: Ingo Molnar --- arch/mips/oprofile/op_model_mipsxx.c | 4 ++-- arch/ppc/kernel/smp.c | 2 +- arch/s390/kernel/time.c | 4 ++-- drivers/watchdog/booke_wdt.c | 6 +++--- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index b40df7d2cf44..54759f1669d3 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -313,7 +313,7 @@ static int __init mipsxx_init(void) if (!cpu_has_mipsmt_pertccounters) counters = counters_total_to_per_cpu(counters); #endif - on_each_cpu(reset_counters, (void *)(long)counters, 0, 1); + on_each_cpu(reset_counters, (void *)(long)counters, 1); op_model_mipsxx_ops.num_counters = counters; switch (current_cpu_type()) { @@ -382,7 +382,7 @@ static void mipsxx_exit(void) int counters = op_model_mipsxx_ops.num_counters; counters = counters_per_cpu_to_total(counters); - on_each_cpu(reset_counters, (void *)(long)counters, 0, 1); + on_each_cpu(reset_counters, (void *)(long)counters, 1); perf_irq = save_perf_irq; } diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c index 055998575cb4..bcab0d210e30 100644 --- a/arch/ppc/kernel/smp.c +++ b/arch/ppc/kernel/smp.c @@ -152,7 +152,7 @@ static void stop_this_cpu(void *dummy) void smp_send_stop(void) { - smp_call_function(stop_this_cpu, NULL, 1, 0); + smp_call_function(stop_this_cpu, NULL, 0); } /* diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 8051e9326dfc..f2cede3947b2 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -1432,7 +1432,7 @@ static void stp_work_fn(struct work_struct *work) */ memset(&stp_sync, 0, sizeof(stp_sync)); preempt_disable(); - smp_call_function(clock_sync_cpu_start, &stp_sync, 0, 0); + smp_call_function(clock_sync_cpu_start, &stp_sync, 0); local_irq_disable(); enable_sync_clock(); @@ -1465,7 +1465,7 @@ static void stp_work_fn(struct work_struct *work) stp_sync.in_sync = 1; local_irq_enable(); - smp_call_function(clock_sync_cpu_end, NULL, 0, 0); + smp_call_function(clock_sync_cpu_end, NULL, 0); preempt_enable(); } diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index c1ba0db48501..770824458d45 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -55,7 +55,7 @@ static void __booke_wdt_ping(void *data) static void booke_wdt_ping(void) { - on_each_cpu(__booke_wdt_ping, NULL, 0, 0); + on_each_cpu(__booke_wdt_ping, NULL, 0); } static void __booke_wdt_enable(void *data) @@ -131,7 +131,7 @@ static int booke_wdt_open(struct inode *inode, struct file *file) spin_lock(&booke_wdt_lock); if (booke_wdt_enabled == 0) { booke_wdt_enabled = 1; - on_each_cpu(__booke_wdt_enable, NULL, 0, 0); + on_each_cpu(__booke_wdt_enable, NULL, 0); printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled " "(wdt_period=%d)\n", booke_wdt_period); } @@ -177,7 +177,7 @@ static int __init booke_wdt_init(void) if (booke_wdt_enabled == 1) { printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled " "(wdt_period=%d)\n", booke_wdt_period); - on_each_cpu(__booke_wdt_enable, NULL, 0, 0); + on_each_cpu(__booke_wdt_enable, NULL, 0); } spin_unlock(&booke_wdt_lock); -- cgit v1.2.3 From 431ceb83f703a343bdd14350480a2224fa4bfedf Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 15 Jul 2008 22:08:04 +0200 Subject: x86: fix TSC build error on 32bit Dave Hansen reported a build error on 32bit which went unnoticed as newer gcc versions seem to optimize unused static functions away before compiling them. Make vread_tsc() depend on CONFIG_X86_64 Signed-off-by: Thomas Gleixner --- arch/x86/kernel/tsc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 3c36f92160c9..7603c0553909 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -358,6 +358,7 @@ static cycle_t read_tsc(void) ret : clocksource_tsc.cycle_last; } +#ifdef CONFIG_X86_64 static cycle_t __vsyscall_fn vread_tsc(void) { cycle_t ret = (cycle_t)vget_cycles(); @@ -365,6 +366,7 @@ static cycle_t __vsyscall_fn vread_tsc(void) return ret >= __vsyscall_gtod_data.clock.cycle_last ? ret : __vsyscall_gtod_data.clock.cycle_last; } +#endif static struct clocksource clocksource_tsc = { .name = "tsc", -- cgit v1.2.3 From de3b69d7d87e1e86c0307f0f15b377dcebeab906 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 15 Jul 2008 13:28:14 -0400 Subject: ftrace: maintainer I'm willing to take responsibility for ftrace, and follow up on any issues that arise due to it. Signed-off-by: Steven Rostedt Signed-off-by: Linus Torvalds --- MAINTAINERS | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 6198fa3deb99..fc6c005c531a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1777,6 +1777,11 @@ M: hch@infradead.org W: ftp://ftp.openlinux.org/pub/people/hch/vxfs S: Maintained +FTRACE +P: Steven Rostedt +M: srostedt@redhat.com +S: Maintained + FUJITSU FR-V (FRV) PORT P: David Howells M: dhowells@redhat.com -- cgit v1.2.3 From fe1a6875fcaaac2041945008a9875d2c07be1d9b Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Tue, 15 Jul 2008 22:28:46 +0200 Subject: mm: fix build on non-mmu machines Commit 1ea0704e0d aka "mm: add a ptep_modify_prot transaction abstraction" caused: | CC init/main.o |In file included from include2/asm/pgtable.h:68, | from /home/bigeasy/git/linux-2.6-m68k/include/linux/mm.h:39, | from include2/asm/uaccess.h:8, | from /home/bigeasy/git/linux-2.6-m68k/include/linux/poll.h:13, | from /home/bigeasy/git/linux-2.6-m68k/include/linux/rtc.h:113, | from /home/bigeasy/git/linux-2.6-m68k/include/linux/efi.h:19, | from /home/bigeasy/git/linux-2.6-m68k/init/main.c:43: |/linux-2.6/include/asm-generic/pgtable.h: In function '__ptep_modify_prot_start': |/linux-2.6/include/asm-generic/pgtable.h:209: error: implicit declaration of function 'ptep_get_and_clear' |/linux-2.6/include/asm-generic/pgtable.h:209: error: incompatible types in return |/linux-2.6/include/asm-generic/pgtable.h: In function '__ptep_modify_prot_commit': |/linux-2.6/include/asm-generic/pgtable.h:220: error: implicit declaration of function 'set_pte_at' |make[2]: *** [init/main.o] Error 1 |make[1]: *** [init] Error 2 |make: *** [sub-make] Error 2 on my m68knommu box. Acked-by: Jeremy Fitzhardinge Cc: Linus Torvalds Cc: Hugh Dickins Cc: Ingo Molnar Signed-off-by: Sebastian Siewior Signed-off-by: Linus Torvalds --- include/asm-generic/pgtable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 4fce3db2cecc..ef87f889ef62 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -195,7 +195,6 @@ static inline int pmd_none_or_clear_bad(pmd_t *pmd) } return 0; } -#endif /* CONFIG_MMU */ static inline pte_t __ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, @@ -253,6 +252,7 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm, __ptep_modify_prot_commit(mm, addr, ptep, pte); } #endif /* __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION */ +#endif /* CONFIG_MMU */ /* * A facility to provide lazy MMU batching. This allows PTE updates and -- cgit v1.2.3 From 63cf13b77ab785e87c867defa8545e6d4a989774 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 15 Jul 2008 13:22:49 -0700 Subject: generic ipi function calls: wait on alloc failure fallback When a GFP_ATOMIC allocation fails, it falls back to allocating the data on the stack and converting it to a waiting call. Make sure we actually wait in this case. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Linus Torvalds --- kernel/smp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/smp.c b/kernel/smp.c index ab10793b0707..462c785ca1ee 100644 --- a/kernel/smp.c +++ b/kernel/smp.c @@ -312,6 +312,7 @@ int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info, if (!data) { data = &d; data->csd.flags = CSD_FLAG_WAIT; + wait = 1; } spin_lock_init(&data->lock); -- cgit v1.2.3 From 987ff954cda2a206f5e694f267b0ccad869c257c Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 15 Jul 2008 17:15:41 -0400 Subject: Fix endianity in A100U2W SCSI driver Support big endian systems in a100u2w driver. Signed-off-by: Mikulas Patocka Signed-off-by: Linus Torvalds --- drivers/scsi/a100u2w.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index ced3eebe252c..1dd0fcfe1d70 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -389,7 +389,7 @@ static u8 orc_load_firmware(struct orc_host * host) outb(PRGMRST | DOWNLOAD, host->base + ORC_RISCCTL); /* Enable SRAM programming */ data32_ptr = (u8 *) & data32; - data32 = 0; /* Initial FW address to 0 */ + data32 = cpu_to_le32(0); /* Initial FW address to 0 */ outw(0x0010, host->base + ORC_EBIOSADR0); *data32_ptr = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */ outw(0x0011, host->base + ORC_EBIOSADR0); @@ -397,18 +397,18 @@ static u8 orc_load_firmware(struct orc_host * host) outw(0x0012, host->base + ORC_EBIOSADR0); *(data32_ptr + 2) = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */ outw(*(data32_ptr + 2), host->base + ORC_EBIOSADR2); - outl(data32, host->base + ORC_FWBASEADR); /* Write FW address */ + outl(le32_to_cpu(data32), host->base + ORC_FWBASEADR); /* Write FW address */ /* Copy the code from the BIOS to the SRAM */ - bios_addr = (u16) data32; /* FW code locate at BIOS address + ? */ + bios_addr = (u16) le32_to_cpu(data32); /* FW code locate at BIOS address + ? */ for (i = 0, data32_ptr = (u8 *) & data32; /* Download the code */ i < 0x1000; /* Firmware code size = 4K */ i++, bios_addr++) { outw(bios_addr, host->base + ORC_EBIOSADR0); *data32_ptr++ = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */ if ((i % 4) == 3) { - outl(data32, host->base + ORC_RISCRAM); /* Write every 4 bytes */ + outl(le32_to_cpu(data32), host->base + ORC_RISCRAM); /* Write every 4 bytes */ data32_ptr = (u8 *) & data32; } } @@ -423,7 +423,7 @@ static u8 orc_load_firmware(struct orc_host * host) outw(bios_addr, host->base + ORC_EBIOSADR0); *data32_ptr++ = inb(host->base + ORC_EBIOSDATA); /* Read from BIOS */ if ((i % 4) == 3) { - if (inl(host->base + ORC_RISCRAM) != data32) { + if (inl(host->base + ORC_RISCRAM) != le32_to_cpu(data32)) { outb(PRGMRST, host->base + ORC_RISCCTL); /* Reset program to 0 */ outb(data, host->base + ORC_GCFG); /*Disable EEPROM programming */ return 0; @@ -459,8 +459,8 @@ static void setup_SCBs(struct orc_host * host) for (i = 0; i < ORC_MAXQUEUE; i++) { escb_phys = (host->escb_phys + (sizeof(struct orc_extended_scb) * i)); - scb->sg_addr = (u32) escb_phys; - scb->sense_addr = (u32) escb_phys; + scb->sg_addr = cpu_to_le32((u32) escb_phys); + scb->sense_addr = cpu_to_le32((u32) escb_phys); scb->escb = escb; scb->scbidx = i; scb++; @@ -642,8 +642,8 @@ static int orc_device_reset(struct orc_host * host, struct scsi_cmnd *cmd, unsig scb->link = 0xFF; scb->reserved0 = 0; scb->reserved1 = 0; - scb->xferlen = 0; - scb->sg_len = 0; + scb->xferlen = cpu_to_le32(0); + scb->sg_len = cpu_to_le32(0); escb->srb = NULL; escb->srb = cmd; @@ -858,9 +858,9 @@ static void inia100_build_scb(struct orc_host * host, struct orc_scb * scb, stru scb->lun = cmd->device->lun; scb->reserved0 = 0; scb->reserved1 = 0; - scb->sg_len = 0; + scb->sg_len = cpu_to_le32(0); - scb->xferlen = (u32) scsi_bufflen(cmd); + scb->xferlen = cpu_to_le32((u32) scsi_bufflen(cmd)); sgent = (struct orc_sgent *) & escb->sglist[0]; count_sg = scsi_dma_map(cmd); @@ -868,18 +868,18 @@ static void inia100_build_scb(struct orc_host * host, struct orc_scb * scb, stru /* Build the scatter gather lists */ if (count_sg) { - scb->sg_len = (u32) (count_sg * 8); + scb->sg_len = cpu_to_le32((u32) (count_sg * 8)); scsi_for_each_sg(cmd, sg, count_sg, i) { - sgent->base = (u32) sg_dma_address(sg); - sgent->length = (u32) sg_dma_len(sg); + sgent->base = cpu_to_le32((u32) sg_dma_address(sg)); + sgent->length = cpu_to_le32((u32) sg_dma_len(sg)); sgent++; } } else { - scb->sg_len = 0; - sgent->base = 0; - sgent->length = 0; + scb->sg_len = cpu_to_le32(0); + sgent->base = cpu_to_le32(0); + sgent->length = cpu_to_le32(0); } - scb->sg_addr = (u32) scb->sense_addr; + scb->sg_addr = (u32) scb->sense_addr; /* sense_addr is already little endian */ scb->hastat = 0; scb->tastat = 0; scb->link = 0xFF; -- cgit v1.2.3 From 56d387ec210049be2fdb0fe26ba6d6de1b3c1b15 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 15 Jul 2008 17:16:38 -0400 Subject: Add udelay to A100U2W SCSI driver udelay is required on Sun Ultra 5. I don't know any reason or explanation for this, it was found purely experimentally. Signed-off-by: Mikulas Patocka Signed-off-by: Linus Torvalds --- drivers/scsi/a100u2w.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index 1dd0fcfe1d70..1e8bdd457834 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -401,6 +401,7 @@ static u8 orc_load_firmware(struct orc_host * host) /* Copy the code from the BIOS to the SRAM */ + udelay(500); /* Required on Sun Ultra 5 ... 350 -> failures */ bios_addr = (u16) le32_to_cpu(data32); /* FW code locate at BIOS address + ? */ for (i = 0, data32_ptr = (u8 *) & data32; /* Download the code */ i < 0x1000; /* Firmware code size = 4K */ -- cgit v1.2.3 From a5db33411ae762e597bfcde6bb9d0c8c2ea9c0eb Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 15 Jul 2008 17:18:38 -0400 Subject: BUG_ON on kernel misbehavior on A100U2W driver With broken Sparc64 IOMMU accounting, the kernel submits larger requests then allowed. Better to crash on BUG than corrupt memory. Signed-off-by: Mikulas Patocka Acked-by: James Bottomley Signed-off-by: Linus Torvalds --- drivers/scsi/a100u2w.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index 1e8bdd457834..f5051f4301d7 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -866,6 +866,7 @@ static void inia100_build_scb(struct orc_host * host, struct orc_scb * scb, stru count_sg = scsi_dma_map(cmd); BUG_ON(count_sg < 0); + BUG_ON(count_sg > TOTAL_SG_ENTRY); /* Build the scatter gather lists */ if (count_sg) { -- cgit v1.2.3 From 3a628b0fd42f7eaf9d052447784d48ceae9ffb8e Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 15 Jul 2008 17:19:55 -0400 Subject: Don't crash on IOMMU overflow in A100U2W driver Handle IOMMU overflow correctly, by retrying. IOMMU errors can happen and drivers must deal with them. Signed-off-by: Mikulas Patocka Signed-off-by: Linus Torvalds --- drivers/scsi/a100u2w.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c index f5051f4301d7..84bb61628372 100644 --- a/drivers/scsi/a100u2w.c +++ b/drivers/scsi/a100u2w.c @@ -840,7 +840,7 @@ static irqreturn_t orc_interrupt(struct orc_host * host) * Build a host adapter control block from the SCSI mid layer command */ -static void inia100_build_scb(struct orc_host * host, struct orc_scb * scb, struct scsi_cmnd * cmd) +static int inia100_build_scb(struct orc_host * host, struct orc_scb * scb, struct scsi_cmnd * cmd) { /* Create corresponding SCB */ struct scatterlist *sg; struct orc_sgent *sgent; /* Pointer to SG list */ @@ -865,7 +865,8 @@ static void inia100_build_scb(struct orc_host * host, struct orc_scb * scb, stru sgent = (struct orc_sgent *) & escb->sglist[0]; count_sg = scsi_dma_map(cmd); - BUG_ON(count_sg < 0); + if (count_sg < 0) + return count_sg; BUG_ON(count_sg > TOTAL_SG_ENTRY); /* Build the scatter gather lists */ @@ -898,6 +899,7 @@ static void inia100_build_scb(struct orc_host * host, struct orc_scb * scb, stru scb->tag_msg = 0; /* No tag support */ } memcpy(scb->cdb, cmd->cmnd, scb->cdb_len); + return 0; } /** @@ -921,7 +923,10 @@ static int inia100_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd if ((scb = orc_alloc_scb(host)) == NULL) return SCSI_MLQUEUE_HOST_BUSY; - inia100_build_scb(host, scb, cmd); + if (inia100_build_scb(host, scb, cmd)) { + orc_release_scb(host, scb); + return SCSI_MLQUEUE_HOST_BUSY; + } orc_exec_scb(host, scb); /* Start execute SCB */ return 0; } -- cgit v1.2.3 From 166b88d755f925139af7f7b75aa0a1b896ca0670 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 14 Jul 2008 16:03:26 -0400 Subject: SUNRPC: Use correct XDR encoding procedure for rpcbind SET/UNSET The rpcbind versions 3 and 4 SET and UNSET procedures use the same arguments as the GETADDR procedure. While definitely a bug, this hasn't been a problem so far since the kernel hasn't used version 3 or 4 SET and UNSET. But this will change in just a moment. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- net/sunrpc/rpcb_clnt.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c index 24e93e0a0a22..0021fad464e0 100644 --- a/net/sunrpc/rpcb_clnt.c +++ b/net/sunrpc/rpcb_clnt.c @@ -426,6 +426,10 @@ static void rpcb_getport_done(struct rpc_task *child, void *data) map->r_status = status; } +/* + * XDR functions for rpcbind + */ + static int rpcb_encode_mapping(struct rpc_rqst *req, __be32 *p, struct rpcbind_args *rpcb) { @@ -581,14 +585,14 @@ static struct rpc_procinfo rpcb_procedures2[] = { }; static struct rpc_procinfo rpcb_procedures3[] = { - PROC(SET, mapping, set), - PROC(UNSET, mapping, set), + PROC(SET, getaddr, set), + PROC(UNSET, getaddr, set), PROC(GETADDR, getaddr, getaddr), }; static struct rpc_procinfo rpcb_procedures4[] = { - PROC(SET, mapping, set), - PROC(UNSET, mapping, set), + PROC(SET, getaddr, set), + PROC(UNSET, getaddr, set), PROC(GETADDR, getaddr, getaddr), PROC(GETVERSADDR, getaddr, getaddr), }; -- cgit v1.2.3 From cc5598b78fd320dd6d1f90c14491e08029f3c4f6 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 14 Jul 2008 16:03:27 -0400 Subject: SUNRPC: Introduce a specific rpcb_create for contacting localhost Add rpcb_create_local() for use by rpcb_register() and upcoming IPv6 registration functions. Ensure any errors encountered by rpcb_create_local() are properly reported. We can also use a statically allocated constant loopback socket address instead of one allocated on the stack and initialized every time the function is called. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- net/sunrpc/rpcb_clnt.c | 42 +++++++++++++++++++++++++++++++----------- 1 file changed, 31 insertions(+), 11 deletions(-) diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c index 0021fad464e0..35c1ded1fc47 100644 --- a/net/sunrpc/rpcb_clnt.c +++ b/net/sunrpc/rpcb_clnt.c @@ -116,6 +116,29 @@ static void rpcb_map_release(void *data) kfree(map); } +static const struct sockaddr_in rpcb_inaddr_loopback = { + .sin_family = AF_INET, + .sin_addr.s_addr = htonl(INADDR_LOOPBACK), + .sin_port = htons(RPCBIND_PORT), +}; + +static struct rpc_clnt *rpcb_create_local(struct sockaddr *addr, + size_t addrlen, u32 version) +{ + struct rpc_create_args args = { + .protocol = XPRT_TRANSPORT_UDP, + .address = addr, + .addrsize = addrlen, + .servername = "localhost", + .program = &rpcb_program, + .version = version, + .authflavor = RPC_AUTH_UNIX, + .flags = RPC_CLNT_CREATE_NOPING, + }; + + return rpc_create(&args); +} + static struct rpc_clnt *rpcb_create(char *hostname, struct sockaddr *srvaddr, size_t salen, int proto, u32 version, int privileged) @@ -161,10 +184,6 @@ static struct rpc_clnt *rpcb_create(char *hostname, struct sockaddr *srvaddr, */ int rpcb_register(u32 prog, u32 vers, int prot, unsigned short port, int *okay) { - struct sockaddr_in sin = { - .sin_family = AF_INET, - .sin_addr.s_addr = htonl(INADDR_LOOPBACK), - }; struct rpcbind_args map = { .r_prog = prog, .r_vers = vers, @@ -184,14 +203,15 @@ int rpcb_register(u32 prog, u32 vers, int prot, unsigned short port, int *okay) "rpcbind\n", (port ? "" : "un"), prog, vers, prot, port); - rpcb_clnt = rpcb_create("localhost", (struct sockaddr *) &sin, - sizeof(sin), XPRT_TRANSPORT_UDP, RPCBVERS_2, 1); - if (IS_ERR(rpcb_clnt)) - return PTR_ERR(rpcb_clnt); + rpcb_clnt = rpcb_create_local((struct sockaddr *)&rpcb_inaddr_loopback, + sizeof(rpcb_inaddr_loopback), + RPCBVERS_2); + if (!IS_ERR(rpcb_clnt)) { + error = rpc_call_sync(rpcb_clnt, &msg, 0); + rpc_shutdown_client(rpcb_clnt); + } else + error = PTR_ERR(rpcb_clnt); - error = rpc_call_sync(rpcb_clnt, &msg, 0); - - rpc_shutdown_client(rpcb_clnt); if (error < 0) printk(KERN_WARNING "RPC: failed to contact local rpcbind " "server (errno %d).\n", -error); -- cgit v1.2.3 From 423d8b064771f5cd8b706a4839b18db9bb6c3c59 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 14 Jul 2008 16:03:28 -0400 Subject: SUNRPC: None of rpcb_create's callers wants a privileged source port Clean up: Callers that required a privileged source port now use rpcb_create_local(), so we can remove the @privileged argument from rpcb_create(). Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- net/sunrpc/rpcb_clnt.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c index 35c1ded1fc47..691bd216f469 100644 --- a/net/sunrpc/rpcb_clnt.c +++ b/net/sunrpc/rpcb_clnt.c @@ -140,8 +140,7 @@ static struct rpc_clnt *rpcb_create_local(struct sockaddr *addr, } static struct rpc_clnt *rpcb_create(char *hostname, struct sockaddr *srvaddr, - size_t salen, int proto, u32 version, - int privileged) + size_t salen, int proto, u32 version) { struct rpc_create_args args = { .protocol = proto, @@ -151,7 +150,8 @@ static struct rpc_clnt *rpcb_create(char *hostname, struct sockaddr *srvaddr, .program = &rpcb_program, .version = version, .authflavor = RPC_AUTH_UNIX, - .flags = RPC_CLNT_CREATE_NOPING, + .flags = (RPC_CLNT_CREATE_NOPING | + RPC_CLNT_CREATE_NONPRIVPORT), }; switch (srvaddr->sa_family) { @@ -165,8 +165,6 @@ static struct rpc_clnt *rpcb_create(char *hostname, struct sockaddr *srvaddr, return NULL; } - if (!privileged) - args.flags |= RPC_CLNT_CREATE_NONPRIVPORT; return rpc_create(&args); } @@ -255,7 +253,7 @@ int rpcb_getport_sync(struct sockaddr_in *sin, u32 prog, u32 vers, int prot) __func__, NIPQUAD(sin->sin_addr.s_addr), prog, vers, prot); rpcb_clnt = rpcb_create(NULL, (struct sockaddr *)sin, - sizeof(*sin), prot, RPCBVERS_2, 0); + sizeof(*sin), prot, RPCBVERS_2); if (IS_ERR(rpcb_clnt)) return PTR_ERR(rpcb_clnt); @@ -365,7 +363,7 @@ void rpcb_getport_async(struct rpc_task *task) task->tk_pid, __func__, bind_version); rpcb_clnt = rpcb_create(clnt->cl_server, sap, salen, xprt->prot, - bind_version, 0); + bind_version); if (IS_ERR(rpcb_clnt)) { status = PTR_ERR(rpcb_clnt); dprintk("RPC: %5u %s: rpcb_create failed, error %ld\n", -- cgit v1.2.3 From babe80eb4994dfdc97d5be19a68b5af66d667585 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 14 Jul 2008 16:03:29 -0400 Subject: SUNRPC: Refactor rpcb_register to make rpcbindv4 support easier rpcbind version 4 registration will reuse part of rpcb_register, so just split it out into a separate function now. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- net/sunrpc/rpcb_clnt.c | 48 ++++++++++++++++++++++++++++++------------------ 1 file changed, 30 insertions(+), 18 deletions(-) diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c index 691bd216f469..8b75c306e661 100644 --- a/net/sunrpc/rpcb_clnt.c +++ b/net/sunrpc/rpcb_clnt.c @@ -168,6 +168,30 @@ static struct rpc_clnt *rpcb_create(char *hostname, struct sockaddr *srvaddr, return rpc_create(&args); } +static int rpcb_register_call(struct sockaddr *addr, size_t addrlen, + u32 version, struct rpc_message *msg, + int *result) +{ + struct rpc_clnt *rpcb_clnt; + int error = 0; + + *result = 0; + + rpcb_clnt = rpcb_create_local(addr, addrlen, version); + if (!IS_ERR(rpcb_clnt)) { + error = rpc_call_sync(rpcb_clnt, msg, 0); + rpc_shutdown_client(rpcb_clnt); + } else + error = PTR_ERR(rpcb_clnt); + + if (error < 0) + printk(KERN_WARNING "RPC: failed to contact local rpcbind " + "server (errno %d).\n", -error); + dprintk("RPC: registration status %d/%d\n", error, *result); + + return error; +} + /** * rpcb_register - set or unset a port registration with the local rpcbind svc * @prog: RPC program number to bind @@ -189,33 +213,21 @@ int rpcb_register(u32 prog, u32 vers, int prot, unsigned short port, int *okay) .r_port = port, }; struct rpc_message msg = { - .rpc_proc = &rpcb_procedures2[port ? - RPCBPROC_SET : RPCBPROC_UNSET], .rpc_argp = &map, .rpc_resp = okay, }; - struct rpc_clnt *rpcb_clnt; - int error = 0; dprintk("RPC: %sregistering (%u, %u, %d, %u) with local " "rpcbind\n", (port ? "" : "un"), prog, vers, prot, port); - rpcb_clnt = rpcb_create_local((struct sockaddr *)&rpcb_inaddr_loopback, - sizeof(rpcb_inaddr_loopback), - RPCBVERS_2); - if (!IS_ERR(rpcb_clnt)) { - error = rpc_call_sync(rpcb_clnt, &msg, 0); - rpc_shutdown_client(rpcb_clnt); - } else - error = PTR_ERR(rpcb_clnt); + msg.rpc_proc = &rpcb_procedures2[RPCBPROC_UNSET]; + if (port) + msg.rpc_proc = &rpcb_procedures2[RPCBPROC_SET]; - if (error < 0) - printk(KERN_WARNING "RPC: failed to contact local rpcbind " - "server (errno %d).\n", -error); - dprintk("RPC: registration status %d/%d\n", error, *okay); - - return error; + return rpcb_register_call((struct sockaddr *)&rpcb_inaddr_loopback, + sizeof(rpcb_inaddr_loopback), + RPCBVERS_2, &msg, okay); } /** -- cgit v1.2.3 From c2e1b09ff237c0a3687b9a804cc8bf489743cffc Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 14 Jul 2008 16:03:30 -0400 Subject: SUNRPC: Support registering IPv6 interfaces with local rpcbind daemon Introduce a new API to register RPC services on IPv6 interfaces to allow the NFS server and lockd to advertise on IPv6 networks. Unlike rpcb_register(), the new rpcb_v4_register() function uses rpcbind protocol version 4 to contact the local rpcbind daemon. The version 4 SET/UNSET procedures allow services to register address families besides AF_INET, register at specific network interfaces, and register transport protocols besides UDP and TCP. All of this functionality is exposed via the new rpcb_v4_register() kernel API. A user-space rpcbind daemon implementation that supports version 4 of the rpcbind protocol is required in order to make use of this new API. Note that rpcbind version 3 is sufficient to support the new rpcbind facilities listed above, but most extant implementations use version 4. Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields Signed-off-by: Trond Myklebust --- include/linux/sunrpc/clnt.h | 3 + net/sunrpc/rpcb_clnt.c | 178 +++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 177 insertions(+), 4 deletions(-) diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index 764fd4c286e0..e5bfe01ee305 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -125,6 +125,9 @@ void rpc_shutdown_client(struct rpc_clnt *); void rpc_release_client(struct rpc_clnt *); int rpcb_register(u32, u32, int, unsigned short, int *); +int rpcb_v4_register(const u32 program, const u32 version, + const struct sockaddr *address, + const char *netid, int *result); int rpcb_getport_sync(struct sockaddr_in *, u32, u32, int); void rpcb_getport_async(struct rpc_task *); diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c index 8b75c306e661..24db2b4d12d3 100644 --- a/net/sunrpc/rpcb_clnt.c +++ b/net/sunrpc/rpcb_clnt.c @@ -87,6 +87,7 @@ struct rpcbind_args { static struct rpc_procinfo rpcb_procedures2[]; static struct rpc_procinfo rpcb_procedures3[]; +static struct rpc_procinfo rpcb_procedures4[]; struct rpcb_info { u32 rpc_vers; @@ -122,6 +123,12 @@ static const struct sockaddr_in rpcb_inaddr_loopback = { .sin_port = htons(RPCBIND_PORT), }; +static const struct sockaddr_in6 rpcb_in6addr_loopback = { + .sin6_family = AF_INET6, + .sin6_addr = IN6ADDR_LOOPBACK_INIT, + .sin6_port = htons(RPCBIND_PORT), +}; + static struct rpc_clnt *rpcb_create_local(struct sockaddr *addr, size_t addrlen, u32 version) { @@ -196,13 +203,38 @@ static int rpcb_register_call(struct sockaddr *addr, size_t addrlen, * rpcb_register - set or unset a port registration with the local rpcbind svc * @prog: RPC program number to bind * @vers: RPC version number to bind - * @prot: transport protocol to use to make this request + * @prot: transport protocol to register * @port: port value to register - * @okay: result code + * @okay: OUT: result code + * + * RPC services invoke this function to advertise their contact + * information via the system's rpcbind daemon. RPC services + * invoke this function once for each [program, version, transport] + * tuple they wish to advertise. + * + * Callers may also unregister RPC services that are no longer + * available by setting the passed-in port to zero. This removes + * all registered transports for [program, version] from the local + * rpcbind database. + * + * Returns zero if the registration request was dispatched + * successfully and a reply was received. The rpcbind daemon's + * boolean result code is stored in *okay. * - * port == 0 means unregister, port != 0 means register. + * Returns an errno value and sets *result to zero if there was + * some problem that prevented the rpcbind request from being + * dispatched, or if the rpcbind daemon did not respond within + * the timeout. * - * This routine supports only rpcbind version 2. + * This function uses rpcbind protocol version 2 to contact the + * local rpcbind daemon. + * + * Registration works over both AF_INET and AF_INET6, and services + * registered via this function are advertised as available for any + * address. If the local rpcbind daemon is listening on AF_INET6, + * services registered via this function will be advertised on + * IN6ADDR_ANY (ie available for all AF_INET and AF_INET6 + * addresses). */ int rpcb_register(u32 prog, u32 vers, int prot, unsigned short port, int *okay) { @@ -230,6 +262,144 @@ int rpcb_register(u32 prog, u32 vers, int prot, unsigned short port, int *okay) RPCBVERS_2, &msg, okay); } +/* + * Fill in AF_INET family-specific arguments to register + */ +static int rpcb_register_netid4(struct sockaddr_in *address_to_register, + struct rpc_message *msg) +{ + struct rpcbind_args *map = msg->rpc_argp; + unsigned short port = ntohs(address_to_register->sin_port); + char buf[32]; + + /* Construct AF_INET universal address */ + snprintf(buf, sizeof(buf), + NIPQUAD_FMT".%u.%u", + NIPQUAD(address_to_register->sin_addr.s_addr), + port >> 8, port & 0xff); + map->r_addr = buf; + + dprintk("RPC: %sregistering [%u, %u, %s, '%s'] with " + "local rpcbind\n", (port ? "" : "un"), + map->r_prog, map->r_vers, + map->r_addr, map->r_netid); + + msg->rpc_proc = &rpcb_procedures4[RPCBPROC_UNSET]; + if (port) + msg->rpc_proc = &rpcb_procedures4[RPCBPROC_SET]; + + return rpcb_register_call((struct sockaddr *)&rpcb_inaddr_loopback, + sizeof(rpcb_inaddr_loopback), + RPCBVERS_4, msg, msg->rpc_resp); +} + +/* + * Fill in AF_INET6 family-specific arguments to register + */ +static int rpcb_register_netid6(struct sockaddr_in6 *address_to_register, + struct rpc_message *msg) +{ + struct rpcbind_args *map = msg->rpc_argp; + unsigned short port = ntohs(address_to_register->sin6_port); + char buf[64]; + + /* Construct AF_INET6 universal address */ + snprintf(buf, sizeof(buf), + NIP6_FMT".%u.%u", + NIP6(address_to_register->sin6_addr), + port >> 8, port & 0xff); + map->r_addr = buf; + + dprintk("RPC: %sregistering [%u, %u, %s, '%s'] with " + "local rpcbind\n", (port ? "" : "un"), + map->r_prog, map->r_vers, + map->r_addr, map->r_netid); + + msg->rpc_proc = &rpcb_procedures4[RPCBPROC_UNSET]; + if (port) + msg->rpc_proc = &rpcb_procedures4[RPCBPROC_SET]; + + return rpcb_register_call((struct sockaddr *)&rpcb_in6addr_loopback, + sizeof(rpcb_in6addr_loopback), + RPCBVERS_4, msg, msg->rpc_resp); +} + +/** + * rpcb_v4_register - set or unset a port registration with the local rpcbind + * @program: RPC program number of service to (un)register + * @version: RPC version number of service to (un)register + * @address: address family, IP address, and port to (un)register + * @netid: netid of transport protocol to (un)register + * @result: result code from rpcbind RPC call + * + * RPC services invoke this function to advertise their contact + * information via the system's rpcbind daemon. RPC services + * invoke this function once for each [program, version, address, + * netid] tuple they wish to advertise. + * + * Callers may also unregister RPC services that are no longer + * available by setting the port number in the passed-in address + * to zero. Callers pass a netid of "" to unregister all + * transport netids associated with [program, version, address]. + * + * Returns zero if the registration request was dispatched + * successfully and a reply was received. The rpcbind daemon's + * result code is stored in *result. + * + * Returns an errno value and sets *result to zero if there was + * some problem that prevented the rpcbind request from being + * dispatched, or if the rpcbind daemon did not respond within + * the timeout. + * + * This function uses rpcbind protocol version 4 to contact the + * local rpcbind daemon. The local rpcbind daemon must support + * version 4 of the rpcbind protocol in order for these functions + * to register a service successfully. + * + * Supported netids include "udp" and "tcp" for UDP and TCP over + * IPv4, and "udp6" and "tcp6" for UDP and TCP over IPv6, + * respectively. + * + * The contents of @address determine the address family and the + * port to be registered. The usual practice is to pass INADDR_ANY + * as the raw address, but specifying a non-zero address is also + * supported by this API if the caller wishes to advertise an RPC + * service on a specific network interface. + * + * Note that passing in INADDR_ANY does not create the same service + * registration as IN6ADDR_ANY. The former advertises an RPC + * service on any IPv4 address, but not on IPv6. The latter + * advertises the service on all IPv4 and IPv6 addresses. + */ +int rpcb_v4_register(const u32 program, const u32 version, + const struct sockaddr *address, const char *netid, + int *result) +{ + struct rpcbind_args map = { + .r_prog = program, + .r_vers = version, + .r_netid = netid, + .r_owner = RPCB_OWNER_STRING, + }; + struct rpc_message msg = { + .rpc_argp = &map, + .rpc_resp = result, + }; + + *result = 0; + + switch (address->sa_family) { + case AF_INET: + return rpcb_register_netid4((struct sockaddr_in *)address, + &msg); + case AF_INET6: + return rpcb_register_netid6((struct sockaddr_in6 *)address, + &msg); + } + + return -EAFNOSUPPORT; +} + /** * rpcb_getport_sync - obtain the port for an RPC service on a given host * @sin: address of remote peer -- cgit v1.2.3 From d67d1c7bf948341fd8678c8e337ec27f4b46b206 Mon Sep 17 00:00:00 2001 From: Felix Blyakher Date: Tue, 15 Jul 2008 12:40:22 -0500 Subject: nfs: set correct fl_len in nlmclnt_test() fcntl(F_GETLK) on an nfs client incorrectly returns the values for the conflicting lock. fl_len value is always 1. If the conflicting lock is (0, 4095) the F_GETLK request for (1024, 10) returns (0, 1), which doesn't even cover the requested range, and is quite confusing. The fix is trivial, set fl_end from the fl_end value recieved from the nfs server. Signed-off-by: Felix Blyakher Signed-off-by: "J. Bruce Fields" Signed-off-by: Trond Myklebust --- fs/lockd/clntproc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c index 5df517b81f3f..fd7d4669776e 100644 --- a/fs/lockd/clntproc.c +++ b/fs/lockd/clntproc.c @@ -430,7 +430,7 @@ nlmclnt_test(struct nlm_rqst *req, struct file_lock *fl) * Report the conflicting lock back to the application. */ fl->fl_start = req->a_res.lock.fl.fl_start; - fl->fl_end = req->a_res.lock.fl.fl_start; + fl->fl_end = req->a_res.lock.fl.fl_end; fl->fl_type = req->a_res.lock.fl.fl_type; fl->fl_pid = 0; break; -- cgit v1.2.3 From 1b83d707032a1be40a60ed0a9bd841662cc04a5d Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 15:44:04 -0400 Subject: NFS: Protect inode->i_nlink updates using inode->i_lock Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index b1940660502f..d6ec1c85995a 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -870,6 +870,14 @@ static int nfs_dentry_delete(struct dentry *dentry) } +static void nfs_drop_nlink(struct inode *inode) +{ + spin_lock(&inode->i_lock); + if (inode->i_nlink > 0) + drop_nlink(inode); + spin_unlock(&inode->i_lock); +} + /* * Called when the dentry loses inode. * We use it to clean up silly-renamed files. @@ -1420,7 +1428,7 @@ static int nfs_safe_remove(struct dentry *dentry) error = NFS_PROTO(dir)->remove(dir, &dentry->d_name); /* The VFS may want to delete this inode */ if (error == 0) - drop_nlink(inode); + nfs_drop_nlink(inode); nfs_mark_for_revalidate(inode); } else error = NFS_PROTO(dir)->remove(dir, &dentry->d_name); @@ -1647,7 +1655,7 @@ static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, /* dentry still busy? */ goto out; } else - drop_nlink(new_inode); + nfs_drop_nlink(new_inode); go_ahead: /* -- cgit v1.2.3 From a3d01454bc58b5a211ef64a7670572a40b71e682 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 12:21:19 -0400 Subject: NFS: Remove BKL requirement from attribute updates The main problem is dealing with inode->i_size: we need to set the inode->i_lock on all attribute updates, and so vmtruncate won't cut it. Make an NFS-private version of vmtruncate that has the necessary locking semantics. The result should be that the following inode attribute updates are protected by inode->i_lock nfsi->cache_validity nfsi->read_cache_jiffies nfsi->attrtimeo nfsi->attrtimeo_timestamp nfsi->change_attr nfsi->last_updated nfsi->cache_change_attribute nfsi->access_cache nfsi->access_cache_entry_lru nfsi->access_cache_inode_lru nfsi->acl_access nfsi->acl_default nfsi->nfs_page_tree nfsi->ncommit nfsi->npages nfsi->open_files nfsi->silly_list nfsi->acl nfsi->open_states inode->i_size inode->i_atime inode->i_mtime inode->i_ctime inode->i_nlink inode->i_uid inode->i_gid The following is protected by dir->i_mutex nfsi->cookieverf Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++++++++------ fs/nfs/write.c | 15 ++++++++----- 2 files changed, 71 insertions(+), 11 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 2c23d067e2a6..3adabd154779 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -388,6 +388,62 @@ nfs_setattr(struct dentry *dentry, struct iattr *attr) return error; } +/** + * nfs_vmtruncate - unmap mappings "freed" by truncate() syscall + * @inode: inode of the file used + * @offset: file offset to start truncating + * + * This is a copy of the common vmtruncate, but with the locking + * corrected to take into account the fact that NFS requires + * inode->i_size to be updated under the inode->i_lock. + */ +static int nfs_vmtruncate(struct inode * inode, loff_t offset) +{ + if (i_size_read(inode) < offset) { + unsigned long limit; + + limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur; + if (limit != RLIM_INFINITY && offset > limit) + goto out_sig; + if (offset > inode->i_sb->s_maxbytes) + goto out_big; + spin_lock(&inode->i_lock); + i_size_write(inode, offset); + spin_unlock(&inode->i_lock); + } else { + struct address_space *mapping = inode->i_mapping; + + /* + * truncation of in-use swapfiles is disallowed - it would + * cause subsequent swapout to scribble on the now-freed + * blocks. + */ + if (IS_SWAPFILE(inode)) + return -ETXTBSY; + spin_lock(&inode->i_lock); + i_size_write(inode, offset); + spin_unlock(&inode->i_lock); + + /* + * unmap_mapping_range is called twice, first simply for + * efficiency so that truncate_inode_pages does fewer + * single-page unmaps. However after this first call, and + * before truncate_inode_pages finishes, it is possible for + * private pages to be COWed, which remain after + * truncate_inode_pages finishes, hence the second + * unmap_mapping_range call must be made for correctness. + */ + unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1); + truncate_inode_pages(mapping, offset); + unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1); + } + return 0; +out_sig: + send_sig(SIGXFSZ, current, 0); +out_big: + return -EFBIG; +} + /** * nfs_setattr_update_inode - Update inode metadata after a setattr call. * @inode: pointer to struct inode @@ -414,8 +470,7 @@ void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr) } if ((attr->ia_valid & ATTR_SIZE) != 0) { nfs_inc_stats(inode, NFSIOS_SETATTRTRUNC); - inode->i_size = attr->ia_size; - vmtruncate(inode, attr->ia_size); + nfs_vmtruncate(inode, attr->ia_size); } } @@ -829,9 +884,9 @@ static void nfs_wcc_update_inode(struct inode *inode, struct nfs_fattr *fattr) if (S_ISDIR(inode->i_mode)) nfsi->cache_validity |= NFS_INO_INVALID_DATA; } - if (inode->i_size == nfs_size_to_loff_t(fattr->pre_size) && + if (i_size_read(inode) == nfs_size_to_loff_t(fattr->pre_size) && nfsi->npages == 0) - inode->i_size = nfs_size_to_loff_t(fattr->size); + i_size_write(inode, nfs_size_to_loff_t(fattr->size)); } } @@ -972,7 +1027,7 @@ int nfs_post_op_update_inode_force_wcc(struct inode *inode, struct nfs_fattr *fa (fattr->valid & NFS_ATTR_WCC) == 0) { memcpy(&fattr->pre_ctime, &inode->i_ctime, sizeof(fattr->pre_ctime)); memcpy(&fattr->pre_mtime, &inode->i_mtime, sizeof(fattr->pre_mtime)); - fattr->pre_size = inode->i_size; + fattr->pre_size = i_size_read(inode); fattr->valid |= NFS_ATTR_WCC; } return nfs_post_op_update_inode(inode, fattr); @@ -1057,7 +1112,7 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) /* Do we perhaps have any outstanding writes, or has * the file grown beyond our last write? */ if (nfsi->npages == 0 || new_isize > cur_isize) { - inode->i_size = new_isize; + i_size_write(inode, new_isize); invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA; } dprintk("NFS: isize change on server for file %s/%ld\n", diff --git a/fs/nfs/write.c b/fs/nfs/write.c index feca8c648766..3229e217c773 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -133,16 +133,21 @@ static struct nfs_page *nfs_page_find_request(struct page *page) static void nfs_grow_file(struct page *page, unsigned int offset, unsigned int count) { struct inode *inode = page->mapping->host; - loff_t end, i_size = i_size_read(inode); - pgoff_t end_index = (i_size - 1) >> PAGE_CACHE_SHIFT; + loff_t end, i_size; + pgoff_t end_index; + spin_lock(&inode->i_lock); + i_size = i_size_read(inode); + end_index = (i_size - 1) >> PAGE_CACHE_SHIFT; if (i_size > 0 && page->index < end_index) - return; + goto out; end = ((loff_t)page->index << PAGE_CACHE_SHIFT) + ((loff_t)offset+count); if (i_size >= end) - return; - nfs_inc_stats(inode, NFSIOS_EXTENDWRITE); + goto out; i_size_write(inode, end); + nfs_inc_stats(inode, NFSIOS_EXTENDWRITE); +out: + spin_unlock(&inode->i_lock); } /* A writeback failed: mark the page as bad, and invalidate the page cache */ -- cgit v1.2.3 From fa6dc9dc59c3a76fd209a97c8cf37395980fb903 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 13:26:14 -0400 Subject: NFS: Remove attribute update related BKL references Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 4 ---- fs/nfs/super.c | 4 ---- 2 files changed, 8 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 3adabd154779..df23f987da6b 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -370,7 +370,6 @@ nfs_setattr(struct dentry *dentry, struct iattr *attr) if ((attr->ia_valid & ~ATTR_FILE) == 0) return 0; - lock_kernel(); /* Write all dirty data */ if (S_ISREG(inode->i_mode)) { filemap_write_and_wait(inode->i_mapping); @@ -384,7 +383,6 @@ nfs_setattr(struct dentry *dentry, struct iattr *attr) error = NFS_PROTO(inode)->setattr(dentry, &fattr, attr); if (error == 0) nfs_refresh_inode(inode, &fattr); - unlock_kernel(); return error; } @@ -700,7 +698,6 @@ __nfs_revalidate_inode(struct nfs_server *server, struct inode *inode) inode->i_sb->s_id, (long long)NFS_FILEID(inode)); nfs_inc_stats(inode, NFSIOS_INODEREVALIDATE); - lock_kernel(); if (is_bad_inode(inode)) goto out_nowait; if (NFS_STALE(inode)) @@ -749,7 +746,6 @@ __nfs_revalidate_inode(struct nfs_server *server, struct inode *inode) nfs_wake_up_inode(inode); out_nowait: - unlock_kernel(); return status; } diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 47cf83e917be..1b94e3650f5c 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -374,8 +374,6 @@ static int nfs_statfs(struct dentry *dentry, struct kstatfs *buf) }; int error; - lock_kernel(); - error = server->nfs_client->rpc_ops->statfs(server, fh, &res); if (error < 0) goto out_err; @@ -407,12 +405,10 @@ static int nfs_statfs(struct dentry *dentry, struct kstatfs *buf) buf->f_namelen = server->namelen; - unlock_kernel(); return 0; out_err: dprintk("%s: statfs error = %d\n", __func__, -error); - unlock_kernel(); return error; } -- cgit v1.2.3 From 4d80f2ecd506d9732ad94a6da104580bb47680d6 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 15:44:18 -0400 Subject: NFS: Remove the BKL from the permission checking code Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index d6ec1c85995a..73e0f9740dd1 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1982,8 +1982,6 @@ int nfs_permission(struct inode *inode, int mask, struct nameidata *nd) } force_lookup: - lock_kernel(); - if (!NFS_PROTO(inode)->access) goto out_notsup; @@ -1993,7 +1991,6 @@ force_lookup: put_rpccred(cred); } else res = PTR_ERR(cred); - unlock_kernel(); out: dfprintk(VFS, "NFS: permission(%s/%ld), mask=0x%x, res=%d\n", inode->i_sb->s_id, inode->i_ino, mask, res); @@ -2002,7 +1999,6 @@ out_notsup: res = nfs_revalidate_inode(NFS_SERVER(inode), inode); if (res == 0) res = generic_permission(inode, mask, NULL); - unlock_kernel(); goto out; } -- cgit v1.2.3 From b6a2e569e2157509951c9f3f58dfa18b44ce91b3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 13:26:16 -0400 Subject: NFS: Remove BKL usage from the write path Signed-off-by: Trond Myklebust --- fs/nfs/file.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 509dcb58959e..f919d9a01a27 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -393,9 +393,7 @@ static int nfs_write_end(struct file *file, struct address_space *mapping, zero_user_segment(page, pglen, PAGE_CACHE_SIZE); } - lock_kernel(); status = nfs_updatepage(file, page, offset, copied); - unlock_kernel(); unlock_page(page); page_cache_release(page); -- cgit v1.2.3 From bba67e0e3f4caba2b2b90b48ed798fb0461bcb86 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 13:26:23 -0400 Subject: NFS: Remove BKL usage from open() All the NFSv4 stateful operations are already protected by other locks (in particular by the rpc_sequence locks. Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 6 ------ fs/nfs/file.c | 2 -- fs/nfs/nfs4proc.c | 2 -- 3 files changed, 10 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 73e0f9740dd1..c68ec447ace1 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -139,10 +139,8 @@ nfs_opendir(struct inode *inode, struct file *filp) nfs_inc_stats(inode, NFSIOS_VFSOPEN); - lock_kernel(); /* Call generic open code in order to cache credentials */ res = nfs_open(inode, filp); - unlock_kernel(); return res; } @@ -1019,9 +1017,7 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry } /* Open the file on the server */ - lock_kernel(); res = nfs4_atomic_open(dir, dentry, nd); - unlock_kernel(); if (IS_ERR(res)) { error = PTR_ERR(res); switch (error) { @@ -1083,9 +1079,7 @@ static int nfs_open_revalidate(struct dentry *dentry, struct nameidata *nd) * operations that change the directory. We therefore save the * change attribute *before* we do the RPC call. */ - lock_kernel(); ret = nfs4_open_revalidate(dir, dentry, openflags, nd); - unlock_kernel(); out: dput(parent); if (!ret) diff --git a/fs/nfs/file.c b/fs/nfs/file.c index f919d9a01a27..9f1bed944b2e 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -128,9 +128,7 @@ nfs_file_open(struct inode *inode, struct file *filp) return res; nfs_inc_stats(inode, NFSIOS_VFSOPEN); - lock_kernel(); res = nfs_open(inode, filp); - unlock_kernel(); return res; } diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 4451287a81d1..c910413eaeca 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -451,9 +451,7 @@ static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata) /* Save the delegation */ memcpy(stateid.data, delegation->stateid.data, sizeof(stateid.data)); rcu_read_unlock(); - lock_kernel(); ret = nfs_may_open(state->inode, state->owner->so_cred, open_mode); - unlock_kernel(); if (ret != 0) goto out; ret = -EAGAIN; -- cgit v1.2.3 From f1e2eda23513b68003202bddf1f84158baad8844 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 15:50:50 -0400 Subject: NFS: Remove the BKL from the inode creation operations nfs_instantiate() does not require the BKL, neither do the attribute updates or the RPC code. Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index c68ec447ace1..d40e91e5c94a 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1232,14 +1232,11 @@ static int nfs_create(struct inode *dir, struct dentry *dentry, int mode, if ((nd->flags & LOOKUP_CREATE) != 0) open_flags = nd->intent.open.flags; - lock_kernel(); error = NFS_PROTO(dir)->create(dir, dentry, &attr, open_flags, nd); if (error != 0) goto out_err; - unlock_kernel(); return 0; out_err: - unlock_kernel(); d_drop(dentry); return error; } @@ -1262,14 +1259,11 @@ nfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t rdev) attr.ia_mode = mode; attr.ia_valid = ATTR_MODE; - lock_kernel(); status = NFS_PROTO(dir)->mknod(dir, dentry, &attr, rdev); if (status != 0) goto out_err; - unlock_kernel(); return 0; out_err: - unlock_kernel(); d_drop(dentry); return status; } @@ -1288,15 +1282,12 @@ static int nfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) attr.ia_valid = ATTR_MODE; attr.ia_mode = mode | S_IFDIR; - lock_kernel(); error = NFS_PROTO(dir)->mkdir(dir, dentry, &attr); if (error != 0) goto out_err; - unlock_kernel(); return 0; out_err: d_drop(dentry); - unlock_kernel(); return error; } -- cgit v1.2.3 From fc81af535e462764e17f638d542973fbef13b026 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 15:52:40 -0400 Subject: NFS: Remove the BKL from nfs_link() Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index d40e91e5c94a..5ae8ee6b298f 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1549,14 +1549,12 @@ nfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry) old_dentry->d_parent->d_name.name, old_dentry->d_name.name, dentry->d_parent->d_name.name, dentry->d_name.name); - lock_kernel(); d_drop(dentry); error = NFS_PROTO(dir)->link(inode, dir, &dentry->d_name); if (error == 0) { atomic_inc(&inode->i_count); d_add(dentry, inode); } - unlock_kernel(); return error; } -- cgit v1.2.3 From fc0f684c21b5d4b41dc2ec76f7c0897ac98f5b6e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 15:44:20 -0400 Subject: NFS: Remove BKL from NFS lookup code All dentry-related operations are already BKL-safe, since they are protected by the VFS locking. No extra locks should be needed in the NFS code. In the case of nfs_revalidate_inode(), we're only doing an attribute update (protected by the inode->i_lock). In the case of nfs_lookup(), we're instantiating a new dentry, so there should be no contention possible until after we call d_materialise_unique. Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 5ae8ee6b298f..60da7550133c 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -777,7 +777,6 @@ static int nfs_lookup_revalidate(struct dentry * dentry, struct nameidata *nd) struct nfs_fattr fattr; parent = dget_parent(dentry); - lock_kernel(); dir = parent->d_inode; nfs_inc_stats(dir, NFSIOS_DENTRYREVALIDATE); inode = dentry->d_inode; @@ -815,7 +814,6 @@ static int nfs_lookup_revalidate(struct dentry * dentry, struct nameidata *nd) nfs_set_verifier(dentry, nfs_save_change_attribute(dir)); out_valid: - unlock_kernel(); dput(parent); dfprintk(LOOKUPCACHE, "NFS: %s(%s/%s) is valid\n", __func__, dentry->d_parent->d_name.name, @@ -834,7 +832,6 @@ out_zap_parent: shrink_dcache_parent(dentry); } d_drop(dentry); - unlock_kernel(); dput(parent); dfprintk(LOOKUPCACHE, "NFS: %s(%s/%s) is invalid\n", __func__, dentry->d_parent->d_name.name, @@ -921,8 +918,6 @@ static struct dentry *nfs_lookup(struct inode *dir, struct dentry * dentry, stru res = ERR_PTR(-ENOMEM); dentry->d_op = NFS_PROTO(dir)->dentry_ops; - lock_kernel(); - /* * If we're doing an exclusive create, optimize away the lookup * but don't hash the dentry. @@ -930,7 +925,7 @@ static struct dentry *nfs_lookup(struct inode *dir, struct dentry * dentry, stru if (nfs_is_exclusive_create(dir, nd)) { d_instantiate(dentry, NULL); res = NULL; - goto out_unlock; + goto out; } parent = dentry->d_parent; @@ -958,8 +953,6 @@ no_entry: nfs_set_verifier(dentry, nfs_save_change_attribute(dir)); out_unblock_sillyrename: nfs_unblock_sillyrename(parent); -out_unlock: - unlock_kernel(); out: return res; } -- cgit v1.2.3 From bd9bb454b76fb6ca2d00f17313f9f9df5f5c404a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 16:09:59 -0400 Subject: NFS: Remove the BKL from the rename, rmdir and unlink operations Attribute updates are safe, and dentry operations are protected using VFS level locks. Defer removing the BKL from sillyrename until a separate patch. Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 60da7550133c..68e0688904ea 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1297,14 +1297,12 @@ static int nfs_rmdir(struct inode *dir, struct dentry *dentry) dfprintk(VFS, "NFS: rmdir(%s/%ld), %s\n", dir->i_sb->s_id, dir->i_ino, dentry->d_name.name); - lock_kernel(); error = NFS_PROTO(dir)->rmdir(dir, &dentry->d_name); /* Ensure the VFS deletes this inode */ if (error == 0 && dentry->d_inode != NULL) clear_nlink(dentry->d_inode); else if (error == -ENOENT) nfs_dentry_handle_enoent(dentry); - unlock_kernel(); return error; } @@ -1429,7 +1427,6 @@ static int nfs_unlink(struct inode *dir, struct dentry *dentry) dfprintk(VFS, "NFS: unlink(%s/%ld, %s)\n", dir->i_sb->s_id, dir->i_ino, dentry->d_name.name); - lock_kernel(); spin_lock(&dcache_lock); spin_lock(&dentry->d_lock); if (atomic_read(&dentry->d_count) > 1) { @@ -1437,6 +1434,7 @@ static int nfs_unlink(struct inode *dir, struct dentry *dentry) spin_unlock(&dcache_lock); /* Start asynchronous writeout of the inode */ write_inode_now(dentry->d_inode, 0); + lock_kernel(); error = nfs_sillyrename(dir, dentry); unlock_kernel(); return error; @@ -1452,7 +1450,6 @@ static int nfs_unlink(struct inode *dir, struct dentry *dentry) nfs_set_verifier(dentry, nfs_save_change_attribute(dir)); } else if (need_rehash) d_rehash(dentry); - unlock_kernel(); return error; } @@ -1587,7 +1584,6 @@ static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, * To prevent any new references to the target during the rename, * we unhash the dentry and free the inode in advance. */ - lock_kernel(); if (!d_unhashed(new_dentry)) { d_drop(new_dentry); rehash = new_dentry; @@ -1621,7 +1617,9 @@ static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, goto out; /* silly-rename the existing target ... */ + lock_kernel(); err = nfs_sillyrename(new_dir, new_dentry); + unlock_kernel(); if (!err) { new_dentry = rehash = dentry; new_inode = NULL; @@ -1665,7 +1663,6 @@ out: /* new dentry created? */ if (dentry) dput(dentry); - unlock_kernel(); return error; } -- cgit v1.2.3 From 52e2e8d37e01edf38ccdccc983fb13ec1456d63d Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 15:44:21 -0400 Subject: NFS: Remove BKL from the sillydelete operations Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 68e0688904ea..1bdc36bf1782 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -884,10 +884,8 @@ static void nfs_dentry_iput(struct dentry *dentry, struct inode *inode) NFS_I(inode)->cache_validity |= NFS_INO_INVALID_DATA; if (dentry->d_flags & DCACHE_NFSFS_RENAMED) { - lock_kernel(); drop_nlink(inode); nfs_complete_unlink(dentry, inode); - unlock_kernel(); } iput(inode); } @@ -1434,9 +1432,7 @@ static int nfs_unlink(struct inode *dir, struct dentry *dentry) spin_unlock(&dcache_lock); /* Start asynchronous writeout of the inode */ write_inode_now(dentry->d_inode, 0); - lock_kernel(); error = nfs_sillyrename(dir, dentry); - unlock_kernel(); return error; } if (!d_unhashed(dentry)) { @@ -1617,9 +1613,7 @@ static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry, goto out; /* silly-rename the existing target ... */ - lock_kernel(); err = nfs_sillyrename(new_dir, new_dentry); - unlock_kernel(); if (!err) { new_dentry = rehash = dentry; new_inode = NULL; -- cgit v1.2.3 From 76566991f94c206d9c5881edcaf99ba72c9e9d61 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 15:44:22 -0400 Subject: NFS: Remove BKL from the symlink code Page cache accesses are serialised using page locks, whereas attribute updates are serialised using inode->i_lock. Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 1bdc36bf1782..e5f950291928 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1482,13 +1482,9 @@ static int nfs_symlink(struct inode *dir, struct dentry *dentry, const char *sym attr.ia_mode = S_IFLNK | S_IRWXUGO; attr.ia_valid = ATTR_MODE; - lock_kernel(); - page = alloc_page(GFP_HIGHUSER); - if (!page) { - unlock_kernel(); + if (!page) return -ENOMEM; - } kaddr = kmap_atomic(page, KM_USER0); memcpy(kaddr, symname, pathlen); @@ -1503,7 +1499,6 @@ static int nfs_symlink(struct inode *dir, struct dentry *dentry, const char *sym dentry->d_name.name, symname, error); d_drop(dentry); __free_page(page); - unlock_kernel(); return error; } @@ -1521,7 +1516,6 @@ static int nfs_symlink(struct inode *dir, struct dentry *dentry, const char *sym } else __free_page(page); - unlock_kernel(); return 0; } -- cgit v1.2.3 From c3cc8c019ca09767d7c9b5457d5cf8ac65085f44 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 15:44:23 -0400 Subject: NFS: Remove BKL from the readdir code Page accesses are serialised using the page locks, whereas all attribute updates are serialised using the inode->i_lock. Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index e5f950291928..28a238dab23a 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -534,8 +534,6 @@ static int nfs_readdir(struct file *filp, void *dirent, filldir_t filldir) (long long)filp->f_pos); nfs_inc_stats(inode, NFSIOS_VFSGETDENTS); - lock_kernel(); - /* * filp->f_pos points to the dirent entry number. * *desc->dir_cookie has the cookie for the next entry. We have @@ -593,7 +591,6 @@ static int nfs_readdir(struct file *filp, void *dirent, filldir_t filldir) } out: nfs_unblock_sillyrename(dentry); - unlock_kernel(); if (res > 0) res = 0; dfprintk(FILE, "NFS: readdir(%s/%s) returns %ld\n", -- cgit v1.2.3 From a86dc496b764ebb1431677b38eab45310e5a2ad4 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 13:37:09 -0400 Subject: SUNRPC: Remove the BKL from the callback functions Push it into those callback functions that actually need it. Note that all the NFS operations use their own locking, so don't need the BKL. Ditto for the rpcbind client. Signed-off-by: Trond Myklebust --- fs/lockd/clntproc.c | 6 ++++++ fs/lockd/svc4proc.c | 2 ++ fs/lockd/svclock.c | 7 ++++++- fs/lockd/svcproc.c | 2 ++ net/sunrpc/sched.c | 9 +-------- 5 files changed, 17 insertions(+), 9 deletions(-) diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c index fd7d4669776e..1f6dc518505c 100644 --- a/fs/lockd/clntproc.c +++ b/fs/lockd/clntproc.c @@ -224,7 +224,9 @@ void nlm_release_call(struct nlm_rqst *call) static void nlmclnt_rpc_release(void *data) { + lock_kernel(); nlm_release_call(data); + unlock_kernel(); } static int nlm_wait_on_grace(wait_queue_head_t *queue) @@ -710,7 +712,9 @@ static void nlmclnt_unlock_callback(struct rpc_task *task, void *data) die: return; retry_rebind: + lock_kernel(); nlm_rebind_host(req->a_host); + unlock_kernel(); retry_unlock: rpc_restart_call(task); } @@ -788,7 +792,9 @@ retry_cancel: /* Don't ever retry more than 3 times */ if (req->a_retries++ >= NLMCLNT_MAX_RETRIES) goto die; + lock_kernel(); nlm_rebind_host(req->a_host); + unlock_kernel(); rpc_restart_call(task); rpc_delay(task, 30 * HZ); } diff --git a/fs/lockd/svc4proc.c b/fs/lockd/svc4proc.c index 385437e3387d..2e27176ff42f 100644 --- a/fs/lockd/svc4proc.c +++ b/fs/lockd/svc4proc.c @@ -248,7 +248,9 @@ static void nlm4svc_callback_exit(struct rpc_task *task, void *data) static void nlm4svc_callback_release(void *data) { + lock_kernel(); nlm_release_call(data); + unlock_kernel(); } static const struct rpc_call_ops nlm4svc_callback_ops = { diff --git a/fs/lockd/svclock.c b/fs/lockd/svclock.c index 81aca859bfde..56a08ab9a4cb 100644 --- a/fs/lockd/svclock.c +++ b/fs/lockd/svclock.c @@ -795,6 +795,7 @@ static void nlmsvc_grant_callback(struct rpc_task *task, void *data) dprintk("lockd: GRANT_MSG RPC callback\n"); + lock_kernel(); /* if the block is not on a list at this point then it has * been invalidated. Don't try to requeue it. * @@ -804,7 +805,7 @@ static void nlmsvc_grant_callback(struct rpc_task *task, void *data) * for nlm_blocked? */ if (list_empty(&block->b_list)) - return; + goto out; /* Technically, we should down the file semaphore here. Since we * move the block towards the head of the queue only, no harm @@ -818,13 +819,17 @@ static void nlmsvc_grant_callback(struct rpc_task *task, void *data) } nlmsvc_insert_block(block, timeout); svc_wake_up(block->b_daemon); +out: + unlock_kernel(); } static void nlmsvc_grant_release(void *data) { struct nlm_rqst *call = data; + lock_kernel(); nlmsvc_release_block(call->a_block); + unlock_kernel(); } static const struct rpc_call_ops nlmsvc_grant_ops = { diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c index 88379cc6e0b1..ce6952b50a75 100644 --- a/fs/lockd/svcproc.c +++ b/fs/lockd/svcproc.c @@ -278,7 +278,9 @@ static void nlmsvc_callback_exit(struct rpc_task *task, void *data) static void nlmsvc_callback_release(void *data) { + lock_kernel(); nlm_release_call(data); + unlock_kernel(); } static const struct rpc_call_ops nlmsvc_callback_ops = { diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index 6288af05c20f..385f427bedad 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -576,9 +576,7 @@ EXPORT_SYMBOL_GPL(rpc_delay); */ static void rpc_prepare_task(struct rpc_task *task) { - lock_kernel(); task->tk_ops->rpc_call_prepare(task, task->tk_calldata); - unlock_kernel(); } /* @@ -588,9 +586,7 @@ void rpc_exit_task(struct rpc_task *task) { task->tk_action = NULL; if (task->tk_ops->rpc_call_done != NULL) { - lock_kernel(); task->tk_ops->rpc_call_done(task, task->tk_calldata); - unlock_kernel(); if (task->tk_action != NULL) { WARN_ON(RPC_ASSASSINATED(task)); /* Always release the RPC slot and buffer memory */ @@ -602,11 +598,8 @@ EXPORT_SYMBOL_GPL(rpc_exit_task); void rpc_release_calldata(const struct rpc_call_ops *ops, void *calldata) { - if (ops->rpc_release != NULL) { - lock_kernel(); + if (ops->rpc_release != NULL) ops->rpc_release(calldata); - unlock_kernel(); - } } /* -- cgit v1.2.3 From f839c4c1991cc9b580ae38f98f54554938a7f49c Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Jun 2008 15:44:26 -0400 Subject: NFSv4: Remove BKL from the nfsv4 state recovery Signed-off-by: Trond Myklebust --- fs/nfs/nfs4state.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 856a8934f610..401ef8b28f97 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -940,7 +940,6 @@ static int reclaimer(void *ptr) allow_signal(SIGKILL); /* Ensure exclusive access to NFSv4 state */ - lock_kernel(); down_write(&clp->cl_sem); /* Are there any NFS mounts out there? */ if (list_empty(&clp->cl_superblocks)) @@ -1000,7 +999,6 @@ restart_loop: nfs_delegation_reap_unclaimed(clp); out: up_write(&clp->cl_sem); - unlock_kernel(); if (status == -NFS4ERR_CB_PATH_DOWN) nfs_handle_cb_pathdown(clp); nfs4_clear_recover_bit(clp); -- cgit v1.2.3 From 809d9a8f93bd8504dcc34b16bbfdfd1a8c9bb1ed Mon Sep 17 00:00:00 2001 From: Alok Kataria Date: Tue, 15 Jul 2008 11:59:42 -0700 Subject: x86/PCI: ACPI based PCI gap calculation Using ACPI to find free address space allows us to find a gap for the unallocated PCI resources or MMIO resources for hotplug devices within the BIOS allowed PCI regions. It works by evaluating the _CRS object under PCI0 looking for producer resources. Then searches the e820 memory space for a gap within these producer resources. Signed-off-by: Alok N Kataria Cc: Andi Kleen Cc: Len Brown Cc: Ingo Molnar Signed-off-by: Jesse Barnes --- arch/x86/pci/acpi.c | 80 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index d95de2f199cd..d1ffb5709174 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -4,6 +4,7 @@ #include #include #include +#include #include "pci.h" struct pci_root_info { @@ -14,6 +15,11 @@ struct pci_root_info { int busnum; }; +struct gap_info { + unsigned long gapstart; + unsigned long gapsize; +}; + static acpi_status resource_to_addr(struct acpi_resource *resource, struct acpi_resource_address64 *addr) @@ -110,6 +116,78 @@ adjust_transparent_bridge_resources(struct pci_bus *bus) } } +static acpi_status search_gap(struct acpi_resource *resource, void *data) +{ + struct acpi_resource_address64 addr; + acpi_status status; + struct gap_info *gap = data; + unsigned long long start_addr, end_addr; + + status = resource_to_addr(resource, &addr); + if (ACPI_SUCCESS(status) && + addr.resource_type == ACPI_MEMORY_RANGE && + addr.address_length > gap->gapsize) { + start_addr = addr.minimum + addr.translation_offset; + /* + * We want space only in the 32bit address range + */ + if (start_addr < UINT_MAX) { + end_addr = start_addr + addr.address_length; + e820_search_gap(&gap->gapstart, &gap->gapsize, + start_addr, end_addr); + } + } + + return AE_OK; +} + +/* + * Search for a hole in the 32 bit address space for PCI to assign MMIO + * resources, for hotplug or unconfigured resources. + * We query the CRS object of the PCI root device to look for possible producer + * resources in the tree and consider these while calulating the start address + * for this hole. + */ +static void pci_setup_gap(acpi_handle *handle) +{ + struct gap_info gap; + acpi_status status; + + gap.gapstart = 0; + gap.gapsize = 0x400000; + + status = acpi_walk_resources(handle, METHOD_NAME__CRS, + search_gap, &gap); + + if (ACPI_SUCCESS(status)) { + unsigned long round; + + if (!gap.gapstart) { + printk(KERN_ERR "ACPI: Warning: Cannot find a gap " + "in the 32bit address range for PCI\n" + "ACPI: PCI devices may collide with " + "hotpluggable memory address range\n"); + } + /* + * Round the gapstart, uses the same logic as in + * e820_gap_setup + */ + round = 0x100000; + while ((gap.gapsize >> 4) > round) + round += round; + /* Fun with two's complement */ + pci_mem_start = (gap.gapstart + round) & -round; + + printk(KERN_INFO "ACPI: PCI resources should " + "start at %lx (gap: %lx:%lx)\n", + pci_mem_start, gap.gapstart, gap.gapsize); + } else { + printk(KERN_ERR "ACPI: Error while searching for gap in " + "the 32bit address range for PCI\n"); + } +} + + static void get_current_resources(struct acpi_device *device, int busnum, int domain, struct pci_bus *bus) @@ -215,6 +293,8 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do if (bus && (pci_probe & PCI_USE__CRS)) get_current_resources(device, busnum, domain, bus); + + pci_setup_gap(device->handle); return bus; } -- cgit v1.2.3 From f2d9c740f6b9f92608dfb2a2bdd797e0350cabe4 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 15 Jul 2008 10:57:33 -0400 Subject: ftrace: ftrace.txt updates This patch includes ftrace.txt updates that address (mostly) comments from Andrew Morton. It also includes updates that were suggested by Randy Dunlap, John Kacur and David Teigland. Signed-off-by: Steven Rostedt Signed-off-by: Linus Torvalds --- Documentation/ftrace.txt | 305 +++++++++++++++++++++++------------------------ 1 file changed, 152 insertions(+), 153 deletions(-) diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt index 77d3faa1a611..f218f616ff6b 100644 --- a/Documentation/ftrace.txt +++ b/Documentation/ftrace.txt @@ -4,9 +4,10 @@ Copyright 2008 Red Hat Inc. Author: Steven Rostedt License: The GNU Free Documentation License, Version 1.2 -Reviewers: Elias Oltmanns and Randy Dunlap +Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton, + John Kacur, and David Teigland. -Writen for: 2.6.26-rc8 linux-2.6-tip.git tip/tracing/ftrace branch +Written for: 2.6.27-rc1 Introduction ------------ @@ -18,10 +19,11 @@ issues that take place outside of user-space. Although ftrace is the function tracer, it also includes an infrastructure that allows for other types of tracing. Some of the -tracers that are currently in ftrace is a tracer to trace +tracers that are currently in ftrace include a tracer to trace context switches, the time it takes for a high priority task to run after it was woken up, the time interrupts are disabled, and -more. +more (ftrace allows for tracer plugins, which means that the list of +tracers can always grow). The File System @@ -35,6 +37,8 @@ To mount the debugfs system: # mkdir /debug # mount -t debugfs nodev /debug +(Note: it is more common to mount at /sys/kernel/debug, but for simplicity + this document will use /debug) That's it! (assuming that you have ftrace configured into your kernel) @@ -50,20 +54,19 @@ of ftrace. Here is a list of some of the key files: available_tracers : This holds the different types of tracers that have been compiled into the kernel. The tracers - listed here can be configured by echoing in their - name into current_tracer. + listed here can be configured by echoing their name + into current_tracer. tracing_enabled : This sets or displays whether the current_tracer is activated and tracing or not. Echo 0 into this - file to disable the tracer or 1 (or non-zero) to - enable it. + file to disable the tracer or 1 to enable it. trace : This file holds the output of the trace in a human readable - format. + format (described below). latency_trace : This file shows the same trace but the information is organized more to display possible latencies - in the system. + in the system (described below). trace_pipe : The output is the same as the "trace" file but this file is meant to be streamed with live tracing. @@ -75,7 +78,7 @@ of ftrace. Here is a list of some of the key files: file, it is consumed, and will not be read again with a sequential read. The "trace" and "latency_trace" files are static, and if the - tracer isn't adding more data, they will display + tracer is not adding more data, they will display the same information every time they are read. iter_ctrl : This file lets the user control the amount of data @@ -92,10 +95,10 @@ of ftrace. Here is a list of some of the key files: trace_entries : This sets or displays the number of trace entries each CPU buffer can hold. The tracer buffers - are the same size for each CPU, so care must be - taken when modifying the trace_entries. The trace - buffers are allocated in pages (blocks of memory that - the kernel uses for allocation, usually 4 KB in size). + are the same size for each CPU. The displayed number + is the size of the CPU buffer and not total size. The + trace buffers are allocated in pages (blocks of memory + that the kernel uses for allocation, usually 4 KB in size). Since each entry is smaller than a page, if the last allocated page has room for more entries than were requested, the rest of the page is used to allocate @@ -112,20 +115,19 @@ of ftrace. Here is a list of some of the key files: on specified CPUS. The format is a hex string representing the CPUS. - set_ftrace_filter : When dynamic ftrace is configured in, the - code is dynamically modified to disable calling - of the function profiler (mcount). This lets - tracing be configured in with practically no overhead - in performance. This also has a side effect of - enabling or disabling specific functions to be - traced. Echoing in names of functions into this - file will limit the trace to only these functions. - - set_ftrace_notrace: This has the opposite effect that - set_ftrace_filter has. Any function that is added - here will not be traced. If a function exists - in both set_ftrace_filter and set_ftrace_notrace, - the function will _not_ be traced. + set_ftrace_filter : When dynamic ftrace is configured in (see the + section below "dynamic ftrace"), the code is dynamically + modified (code text rewrite) to disable calling of the + function profiler (mcount). This lets tracing be configured + in with practically no overhead in performance. This also + has a side effect of enabling or disabling specific functions + to be traced. Echoing names of functions into this file + will limit the trace to only those functions. + + set_ftrace_notrace: This has an effect opposite to that of + set_ftrace_filter. Any function that is added here will not + be traced. If a function exists in both set_ftrace_filter + and set_ftrace_notrace, the function will _not_ be traced. available_filter_functions : When a function is encountered the first time by the dynamic tracer, it is recorded and @@ -133,32 +135,31 @@ of ftrace. Here is a list of some of the key files: lists the functions that have been recorded by the dynamic tracer and these functions can be used to set the ftrace filter by the above - "set_ftrace_filter" file. + "set_ftrace_filter" file. (See the section "dynamic ftrace" + below for more details). The Tracers ----------- -Here are the list of current tracers that can be configured. +Here is the list of current tracers that may be configured. ftrace - function tracer that uses mcount to trace all functions. - It is possible to filter out which functions that are - to be traced when dynamic ftrace is configured in. sched_switch - traces the context switches between tasks. - irqsoff - traces the areas that disable interrupts and saves off + irqsoff - traces the areas that disable interrupts and saves the trace with the longest max latency. See tracing_max_latency. When a new max is recorded, it replaces the old trace. It is best to view this - trace with the latency_trace file. + trace via the latency_trace file. - preemptoff - Similar to irqsoff but traces and records the time - preemption is disabled. + preemptoff - Similar to irqsoff but traces and records the amount of + time for which preemption is disabled. preemptirqsoff - Similar to irqsoff and preemptoff, but traces and - records the largest time irqs and/or preemption is - disabled. + records the largest time for which irqs and/or preemption + is disabled. wakeup - Traces and records the max latency that it takes for the highest priority task to get scheduled after @@ -171,13 +172,13 @@ Here are the list of current tracers that can be configured. Examples of using the tracer ---------------------------- -Here are typical examples of using the tracers with only controlling -them with the debugfs interface (without using any user-land utilities). +Here are typical examples of using the tracers when controlling them only +with the debugfs interface (without using any user-land utilities). Output format: -------------- -Here's an example of the output format of the file "trace" +Here is an example of the output format of the file "trace" -------- # tracer: ftrace @@ -189,14 +190,15 @@ Here's an example of the output format of the file "trace" bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput -------- -A header is printed with the trace that is represented. In this case -the tracer is "ftrace". Then a header showing the format. Task name -"bash", the task PID "4251", the CPU that it was running on +A header is printed with the tracer name that is represented by the trace. +In this case the tracer is "ftrace". Then a header showing the format. Task +name "bash", the task PID "4251", the CPU that it was running on "01", the timestamp in . format, the function name that was traced "path_put" and the parent function that called this function -"path_walk". +"path_walk". The timestamp is the time at which the function was +entered. -The sched_switch tracer also includes tracing of task wake ups and +The sched_switch tracer also includes tracing of task wakeups and context switches. ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S @@ -206,7 +208,7 @@ context switches. kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R -Wake ups are represented by a "+" and the context switches show +Wake ups are represented by a "+" and the context switches are shown as "==>". The format is: Context switches: @@ -221,7 +223,7 @@ Wake ups are represented by a "+" and the context switches show :: + :: -The prio is the internal kernel priority, which is inverse to the +The prio is the internal kernel priority, which is the inverse of the priority that is usually displayed by user-space tools. Zero represents the highest priority (99). Prio 100 starts the "nice" priorities with 100 being equal to nice -20 and 139 being nice 19. The prio "140" is @@ -232,7 +234,7 @@ Latency trace format -------------------- For traces that display latency times, the latency_trace file gives -a bit more information to see why a latency happened. Here's a typical +somewhat more information to see why a latency happened. Here is a typical trace. # tracer: irqsoff @@ -260,21 +262,20 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8 -0 0d.s1 98us : trace_hardirqs_on (do_softirq) -vim:ft=help - -This shows that the current tracer is "irqsoff" tracing the time -interrupts are disabled. It gives the trace version and the kernel -this was executed on (2.6.26-rc8). Then it displays the max latency -in microsecs (97 us). The number of trace entries displayed -by the total number recorded (both are three: #3/3). The type of +This shows that the current tracer is "irqsoff" tracing the time for which +interrupts were disabled. It gives the trace version and the version +of the kernel upon which this was executed on (2.6.26-rc8). Then it displays +the max latency in microsecs (97 us). The number of trace entries displayed +and the total number recorded (both are three: #3/3). The type of preemption that was used (PREEMPT). VP, KP, SP, and HP are always zero -and reserved for later use. #P is the number of online CPUS (#P:2). +and are reserved for later use. #P is the number of online CPUS (#P:2). -The task is the process that was running when the latency happened. +The task is the process that was running when the latency occurred. (swapper pid: 0). -The start and stop that caused the latencies: +The start and stop (the functions in which the interrupts were disabled and +enabled respectively) that caused the latencies: apic_timer_interrupt is where the interrupts were disabled. do_softirq is where they were enabled again. @@ -286,14 +287,14 @@ explains which is which. pid: The PID of that process. - CPU#: The CPU that the process was running on. + CPU#: The CPU which the process was running on. irqs-off: 'd' interrupts are disabled. '.' otherwise. need-resched: 'N' task need_resched is set, '.' otherwise. hardirq/softirq: - 'H' - hard irq happened inside a softirq. + 'H' - hard irq occurred inside a softirq. 'h' - hard irq is running 's' - soft irq is running '.' - normal context. @@ -303,7 +304,7 @@ explains which is which. The above is mostly meaningful for kernel developers. time: This differs from the trace file output. The trace file output - included an absolute timestamp. The timestamp used by the + includes an absolute timestamp. The timestamp used by the latency_trace file is relative to the start of the trace. delay: This is just to help catch your eye a bit better. And @@ -385,7 +386,7 @@ Here are the available options: sched_switch ------------ -This tracer simply records schedule switches. Here's an example +This tracer simply records schedule switches. Here is an example of how to use it. # echo sched_switch > /debug/tracing/current_tracer @@ -421,8 +422,8 @@ the name of the trace and points to the options. The "FUNCTION" is a misnomer since here it represents the wake ups and context switches. -The sched_switch only lists the wake ups (represented with '+') -and context switches ('==>') with the previous task or current +The sched_switch file only lists the wake ups (represented with '+') +and context switches ('==>') with the previous task or current task first followed by the next task or task waking up. The format for both of these is PID:KERNEL-PRIO:TASK-STATE. Remember that the KERNEL-PRIO is the inverse of the actual priority with zero (0) being the highest @@ -437,7 +438,8 @@ The task states are: R - running : wants to run, may not actually be running S - sleep : process is waiting to be woken up (handles signals) - D - deep sleep : process must be woken up (ignores signals) + D - disk sleep (uninterruptible sleep) : process must be woken up + (ignores signals) T - stopped : process suspended t - traced : process is being traced (with something like gdb) Z - zombie : process waiting to be cleaned up @@ -447,8 +449,8 @@ The task states are: ftrace_enabled -------------- -The following tracers give different output depending on whether -or not the sysctl ftrace_enabled is set. To set ftrace_enabled, +The following tracers (listed below) give different output depending +on whether or not the sysctl ftrace_enabled is set. To set ftrace_enabled, one can either use the sysctl function or set it via the proc file system interface. @@ -475,13 +477,12 @@ interrupt from triggering or the mouse interrupt from letting the kernel know of a new mouse event. The result is a latency with the reaction time. -The irqsoff tracer tracks the time interrupts are disabled to the time -they are re-enabled. When a new maximum latency is hit, it saves off -the trace so that it may be retrieved at a later time. Every time a -new maximum in reached, the old saved trace is discarded and the new -trace is saved. +The irqsoff tracer tracks the time for which interrupts are disabled. +When a new maximum latency is hit, the tracer saves the trace leading up +to that latency point so that every time a new maximum is reached, the old +saved trace is discarded and the new trace is saved. -To reset the maximum, echo 0 into tracing_max_latency. Here's an +To reset the maximum, echo 0 into tracing_max_latency. Here is an example: # echo irqsoff > /debug/tracing/current_tracer @@ -493,14 +494,14 @@ example: # cat /debug/tracing/latency_trace # tracer: irqsoff # -irqsoff latency trace v1.1.5 on 2.6.26-rc8 +irqsoff latency trace v1.1.5 on 2.6.26 -------------------------------------------------------------------- - latency: 6 us, #3/3, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) + latency: 12 us, #3/3, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2) ----------------- - | task: bash-4269 (uid:0 nice:0 policy:0 rt_prio:0) + | task: bash-3730 (uid:0 nice:0 policy:0 rt_prio:0) ----------------- - => started at: copy_page_range - => ended at: copy_page_range + => started at: sys_setpgid + => ended at: sys_setpgid # _------=> CPU# # / _-----=> irqs-off @@ -511,21 +512,19 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8 # ||||| delay # cmd pid ||||| time | caller # \ / ||||| \ | / - bash-4269 1...1 0us+: _spin_lock (copy_page_range) - bash-4269 1...1 7us : _spin_unlock (copy_page_range) - bash-4269 1...2 7us : trace_preempt_on (copy_page_range) - + bash-3730 1d... 0us : _write_lock_irq (sys_setpgid) + bash-3730 1d..1 1us+: _write_unlock_irq (sys_setpgid) + bash-3730 1d..2 14us : trace_hardirqs_on (sys_setpgid) -vim:ft=help -Here we see that that we had a latency of 6 microsecs (which is -very good). The spin_lock in copy_page_range disabled interrupts. -The difference between the 6 and the displayed timestamp 7us is -because the clock must have incremented between the time of recording -the max latency and recording the function that had that latency. +Here we see that that we had a latency of 12 microsecs (which is +very good). The _write_lock_irq in sys_setpgid disabled interrupts. +The difference between the 12 and the displayed timestamp 14us occurred +because the clock was incremented between the time of recording the max +latency and the time of recording the function that had that latency. -Note the above had ftrace_enabled not set. If we set the ftrace_enabled, -we get a much larger output: +Note the above example had ftrace_enabled not set. If we set the +ftrace_enabled, we get a much larger output: # tracer: irqsoff # @@ -571,12 +570,10 @@ irqsoff latency trace v1.1.5 on 2.6.26-rc8 ls-4339 0d..2 51us : trace_hardirqs_on (__alloc_pages_internal) -vim:ft=help - Here we traced a 50 microsecond latency. But we also see all the functions that were called during that time. Note that by enabling -function tracing, we endure an added overhead. This overhead may +function tracing, we incur an added overhead. This overhead may extend the latency times. But nevertheless, this trace has provided some very helpful debugging information. @@ -590,8 +587,9 @@ for preemption to be enabled again before it can preempt a lower priority task. The preemptoff tracer traces the places that disable preemption. -Like the irqsoff, it records the maximum latency that preemption -was disabled. The control of preemptoff is much like the irqsoff. +Like the irqsoff tracer, it records the maximum latency for which preemption +was disabled. The control of preemptoff tracer is much like the irqsoff +tracer. # echo preemptoff > /debug/tracing/current_tracer # echo 0 > /debug/tracing/tracing_max_latency @@ -625,8 +623,6 @@ preemptoff latency trace v1.1.5 on 2.6.26-rc8 sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq) -vim:ft=help - This has some more changes. Preemption was disabled when an interrupt came in (notice the 'h'), and was enabled while doing a softirq. (notice the 's'). But we also see that interrupts have been disabled @@ -694,16 +690,16 @@ The above is an example of the preemptoff trace with ftrace_enabled set. Here we see that interrupts were disabled the entire time. The irq_enter code lets us know that we entered an interrupt 'h'. Before that, the functions being traced still show that it is not -in an interrupt, but we can see by the functions themselves that +in an interrupt, but we can see from the functions themselves that this is not the case. -Notice that the __do_softirq when called doesn't have a preempt_count. -It may seem that we missed a preempt enabled. What really happened -is that the preempt count is held on the threads stack and we +Notice that __do_softirq when called does not have a preempt_count. +It may seem that we missed a preempt enabling. What really happened +is that the preempt count is held on the thread's stack and we switched to the softirq stack (4K stacks in effect). The code does not copy the preempt count, but because interrupts are disabled, -we don't need to worry about it. Having a tracer like this is good -to let people know what really happens inside the kernel. +we do not need to worry about it. Having a tracer like this is good +for letting people know what really happens inside the kernel. preemptirqsoff @@ -713,7 +709,7 @@ Knowing the locations that have interrupts disabled or preemption disabled for the longest times is helpful. But sometimes we would like to know when either preemption and/or interrupts are disabled. -The following code: +Consider the following code: local_irq_disable(); call_function_with_irqs_off(); @@ -769,12 +765,10 @@ preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 ls-4860 0d.s1 294us : trace_preempt_on (__do_softirq) -vim:ft=help - The trace_hardirqs_off_thunk is called from assembly on x86 when interrupts are disabled in the assembly code. Without the function -tracing, we don't know if interrupts were enabled within the preemption +tracing, we do not know if interrupts were enabled within the preemption points. We do see that it started with preemption enabled. Here is a trace with ftrace_enabled set: @@ -865,19 +859,19 @@ preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8 This is a very interesting trace. It started with the preemption of the ls task. We see that the task had the "need_resched" bit set -with the 'N' in the trace. Interrupts are disabled in the spin_lock -and the trace started. We see that a schedule took place to run +via the 'N' in the trace. Interrupts were disabled before the spin_lock +at the beginning of the trace. We see that a schedule took place to run sshd. When the interrupts were enabled, we took an interrupt. On return from the interrupt handler, the softirq ran. We took another -interrupt while running the softirq as we see with the capital 'H'. +interrupt while running the softirq as we see from the capital 'H'. wakeup ------ -In Real-Time environment it is very important to know the wakeup -time it takes for the highest priority task that wakes up to the -time it executes. This is also known as "schedule latency". +In a Real-Time environment it is very important to know the wakeup +time it takes for the highest priority task that is woken up to the +time that it executes. This is also known as "schedule latency". I stress the point that this is about RT tasks. It is also important to know the scheduling latency of non-RT tasks, but the average schedule latency is better for non-RT tasks. Tools like @@ -926,8 +920,6 @@ wakeup latency trace v1.1.5 on 2.6.26-rc8 -0 1d..4 4us : schedule (cpu_idle) -vim:ft=help - Running this on an idle system, we see that it only took 4 microseconds to perform the task switch. Note, since the trace marker in the @@ -996,15 +988,15 @@ ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock) ksoftirq-7 1d..4 50us : schedule (__cond_resched) The interrupt went off while running ksoftirqd. This task runs at -SCHED_OTHER. Why didn't we see the 'N' set early? This may be +SCHED_OTHER. Why did not we see the 'N' set early? This may be a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K stacks -configured, the interrupt and softirq runs with their own stack. +configured, the interrupt and softirq run with their own stack. Some information is held on the top of the task's stack (need_resched and preempt_count are both stored there). The setting of the NEED_RESCHED bit is done directly to the task's stack, but the reading of the NEED_RESCHED is done by looking at the current stack, which in this case is the stack for the hard interrupt. This hides the fact that NEED_RESCHED -has been set. We don't see the 'N' until we switch back to the task's +has been set. We do not see the 'N' until we switch back to the task's assigned stack. ftrace @@ -1044,14 +1036,14 @@ this tracer is a nop. [...] -Note: It is sometimes better to enable or disable tracing directly from -a program, because the buffer may be overflowed by the echo commands -before you get to the point you want to trace. It is also easier to -stop the tracing at the point that you hit the part that you are -interested in. Since the ftrace buffer is a ring buffer with the -oldest data being overwritten, usually it is sufficient to start the -tracer with an echo command but have you code stop it. Something -like the following is usually appropriate for this. +Note: ftrace uses ring buffers to store the above entries. The newest data +may overwrite the oldest data. Sometimes using echo to stop the trace +is not sufficient because the tracing could have overwritten the data +that you wanted to record. For this reason, it is sometimes better to +disable tracing directly from a program. This allows you to stop the +tracing at the point that you hit the part that you are interested in. +To disable the tracing directly from a C program, something like following +code snippet can be used: int trace_fd; [...] @@ -1060,20 +1052,26 @@ int main(int argc, char *argv[]) { trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY); [...] if (condition_hit()) { - write(trace_fd, "0", 1); + write(trace_fd, "0", 1); } [...] } +Note: Here we hard coded the path name. The debugfs mount is not +guaranteed to be at /debug (and is more commonly at /sys/kernel/debug). +For simple one time traces, the above is sufficent. For anything else, +a search through /proc/mounts may be needed to find where the debugfs +file-system is mounted. dynamic ftrace -------------- -If CONFIG_DYNAMIC_FTRACE is set, then the system will run with +If CONFIG_DYNAMIC_FTRACE is set, the system will run with virtually no overhead when function tracing is disabled. The way this works is the mcount function call (placed at the start of every kernel function, produced by the -pg switch in gcc), starts -of pointing to a simple return. +of pointing to a simple return. (Enabling FTRACE will include the +-pg switch in the compiling of the kernel.) When dynamic ftrace is initialized, it calls kstop_machine to make the machine act like a uniprocessor so that it can freely modify code @@ -1086,15 +1084,15 @@ Later on the ftraced kernel thread is awoken and will again call kstop_machine if new functions have been recorded. The ftraced thread will change all calls to mcount to "nop". Just calling mcount and having mcount return has shown a 10% overhead. By converting -it to a nop, there is no recordable overhead to the system. +it to a nop, there is no measurable overhead to the system. One special side-effect to the recording of the functions being -traced, is that we can now selectively choose which functions we -want to trace and which ones we want the mcount calls to remain as +traced is that we can now selectively choose which functions we +wish to trace and which ones we want the mcount calls to remain as nops. Two files are used, one for enabling and one for disabling the tracing -of recorded functions. They are: +of specified functions. They are: set_ftrace_filter @@ -1116,7 +1114,7 @@ pick_next_task_fair mutex_lock [...] -If I'm only interested in sys_nanosleep and hrtimer_interrupt: +If I am only interested in sys_nanosleep and hrtimer_interrupt: # echo sys_nanosleep hrtimer_interrupt \ > /debug/tracing/set_ftrace_filter @@ -1133,21 +1131,21 @@ If I'm only interested in sys_nanosleep and hrtimer_interrupt: usleep-4134 [00] 1317.070111: sys_nanosleep <-syscall_call -0 [00] 1317.070115: hrtimer_interrupt <-smp_apic_timer_interrupt -To see what functions are being traced, you can cat the file: +To see which functions are being traced, you can cat the file: # cat /debug/tracing/set_ftrace_filter hrtimer_interrupt sys_nanosleep -Perhaps this isn't enough. The filters also allow simple wild cards. +Perhaps this is not enough. The filters also allow simple wild cards. Only the following are currently available * - will match functions that begin with * - will match functions that end with ** - will match functions that have in it -Thats all the wild cards that are allowed. +These are the only wild cards which are supported. * will not work. @@ -1258,15 +1256,15 @@ calls that need to be converted into nops. If there are not any, then it simply goes back to sleep. But if there are some, it will call kstop_machine to convert the calls to nops. -There may be a case that you do not want this added latency. +There may be a case in which you do not want this added latency. Perhaps you are doing some audio recording and this activity might cause skips in the playback. There is an interface to disable -and enable the ftraced kernel thread. +and enable the "ftraced" kernel thread. # echo 0 > /debug/tracing/ftraced_enabled -This will disable the calling of the kstop_machine to update the -mcount calls to nops. Remember that there's a large overhead +This will disable the calling of kstop_machine to update the +mcount calls to nops. Remember that there is a large overhead to calling mcount. Without this kernel thread, that overhead will exist. @@ -1282,8 +1280,8 @@ that uses ftrace function recording. trace_pipe ---------- -The trace_pipe outputs the same as trace, but the effect on the -tracing is different. Every read from trace_pipe is consumed. +The trace_pipe outputs the same content as the trace file, but the effect +on the tracing is different. Every read from trace_pipe is consumed. This means that subsequent reads will be different. The trace is live. @@ -1313,7 +1311,7 @@ is live. bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up -Note, reading the trace_pipe will block until more input is added. +Note, reading the trace_pipe file will block until more input is added. By changing the tracer, trace_pipe will issue an EOF. We needed to set the ftrace tracer _before_ cating the trace_pipe file. @@ -1322,7 +1320,7 @@ trace entries ------------- Having too much or not enough data can be troublesome in diagnosing -some issue in the kernel. The file trace_entries is used to modify +an issue in the kernel. The file trace_entries is used to modify the size of the internal trace buffers. The number listed is the number of entries that can be recorded per CPU. To know the full size, multiply the number of possible CPUS with the @@ -1332,7 +1330,8 @@ number of entries. 65620 Note, to modify this, you must have tracing completely disabled. To do that, -echo "none" into the current_tracer. +echo "none" into the current_tracer. If the current_tracer is not set +to "none", an EINVAL error will be returned. # echo none > /debug/tracing/current_tracer # echo 100000 > /debug/tracing/trace_entries @@ -1341,18 +1340,18 @@ echo "none" into the current_tracer. Notice that we echoed in 100,000 but the size is 100,045. The entries -are held by individual pages. It allocates the number of pages it takes +are held in individual pages. It allocates the number of pages it takes to fulfill the request. If more entries may fit on the last page -it will add them. +then they will be added. # echo 1 > /debug/tracing/trace_entries # cat /debug/tracing/trace_entries 85 -This shows us that 85 entries can fit on a single page. +This shows us that 85 entries can fit in a single page. -The number of pages that will be allocated is a percentage of available -memory. Allocating too much will produce an error. +The number of pages which will be allocated is limited to a percentage +of available memory. Allocating too much will produce an error. # echo 1000000000000 > /debug/tracing/trace_entries -bash: echo: write error: Cannot allocate memory -- cgit v1.2.3 From d25dc7fd4740decf4c66e2f17dbaa288448fabd5 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Tue, 15 Jul 2008 22:54:04 -0700 Subject: Fix 'make clean' and .gitignore for firmware/ directory. Provide a .gitignore file, and fix a typo which prevented some of the generated binary files from being removed on 'make clean'. Signed-off-by: David Woodhouse Reported-and-tested-by: Alexey Dobriyan Signed-off-by: Linus Torvalds --- firmware/.gitignore | 6 ++++++ firmware/Makefile | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-) create mode 100644 firmware/.gitignore diff --git a/firmware/.gitignore b/firmware/.gitignore new file mode 100644 index 000000000000..d9c69017bc9a --- /dev/null +++ b/firmware/.gitignore @@ -0,0 +1,6 @@ +*.gen.S +*.fw +*.bin +*.csp +*.dsp +ihex2fw diff --git a/firmware/Makefile b/firmware/Makefile index e4f2fb3d1917..9fe86041f86e 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -56,7 +56,7 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw else -fw-shipped- := keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \ +fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \ keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \ keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \ keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw -- cgit v1.2.3 From 9fce1bc956c21dfe0f46be028f18c4d5057f2bd7 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 16 Jul 2008 22:54:30 +0800 Subject: PCI: remove unnecessary volatile in PCIe hotplug struct controller Proper memory barriers have been added to order accesses to ->cmd_busy, so volatile declaration for cmd_busy can be removed. Signed-off-by: Ming Lei Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/pciehp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index d17233ae06f5..e3a1e7e7dba2 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -97,7 +97,7 @@ struct controller { u32 slot_cap; u8 cap_base; struct timer_list poll_timer; - volatile int cmd_busy; + int cmd_busy; unsigned int no_cmd_complete:1; }; -- cgit v1.2.3 From e22146e610bb7aed63282148740ab1d1b91e1d90 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Wed, 16 Jul 2008 11:11:59 -0500 Subject: x86: fix kernel_physical_mapping_init() for large x86 systems Fix bug in kernel_physical_mapping_init() that causes kernel page table to be built incorrectly for systems with greater than 512GB of memory. Signed-off-by: Jack Steiner Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar --- arch/x86/mm/init_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 27de2435e008..306049edd553 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -644,7 +644,7 @@ static unsigned long __init kernel_physical_mapping_init(unsigned long start, unsigned long pud_phys; pud_t *pud; - next = start + PGDIR_SIZE; + next = (start + PGDIR_SIZE) & PGDIR_MASK; if (next > end) next = end; -- cgit v1.2.3 From bd4bc3dbded9cd7b2bdca6bba1aecb4251a8039d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:05 +0200 Subject: i2c: Clear i2c_adapter.dev on adapter removal Clear i2c_adapter.dev on adapter removal. This makes it possible to re-add the adapter at a later point, which some drivers (i2c-amd756-s4882, i2c-nforce2-s4985) actually do. This fixes a bug reported by John Stultz here: http://lkml.org/lkml/2008/7/15/720 and by Ingo Molar there: http://lkml.org/lkml/2008/7/16/78 Signed-off-by: Jean Delvare Cc: John Stultz Cc: Ingo Molnar --- drivers/i2c/busses/i2c-amd756-s4882.c | 27 +++++++++++++-------------- drivers/i2c/busses/i2c-nforce2-s4985.c | 31 +++++++++++++++---------------- drivers/i2c/i2c-core.c | 4 ++++ 3 files changed, 32 insertions(+), 30 deletions(-) diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c index 2f150e33c74c..72872d1e63ef 100644 --- a/drivers/i2c/busses/i2c-amd756-s4882.c +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -155,6 +155,16 @@ static int __init amd756_s4882_init(void) int i, error; union i2c_smbus_data ioconfig; + /* Configure the PCA9556 multiplexer */ + ioconfig.byte = 0x00; /* All I/O to output mode */ + error = i2c_smbus_xfer(&amd756_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03, + I2C_SMBUS_BYTE_DATA, &ioconfig); + if (error) { + dev_err(&amd756_smbus.dev, "PCA9556 configuration failed\n"); + error = -EIO; + goto ERROR0; + } + /* Unregister physical bus */ error = i2c_del_adapter(&amd756_smbus); if (error) { @@ -198,22 +208,11 @@ static int __init amd756_s4882_init(void) s4882_algo[3].smbus_xfer = amd756_access_virt3; s4882_algo[4].smbus_xfer = amd756_access_virt4; - /* Configure the PCA9556 multiplexer */ - ioconfig.byte = 0x00; /* All I/O to output mode */ - error = amd756_smbus.algo->smbus_xfer(&amd756_smbus, 0x18, 0, - I2C_SMBUS_WRITE, 0x03, - I2C_SMBUS_BYTE_DATA, &ioconfig); - if (error) { - dev_err(&amd756_smbus.dev, "PCA9556 configuration failed\n"); - error = -EIO; - goto ERROR3; - } - /* Register virtual adapters */ for (i = 0; i < 5; i++) { error = i2c_add_adapter(s4882_adapter+i); if (error) { - dev_err(&amd756_smbus.dev, + printk(KERN_ERR "i2c-amd756-s4882: " "Virtual adapter %d registration " "failed, module not inserted\n", i); for (i--; i >= 0; i--) @@ -252,8 +251,8 @@ static void __exit amd756_s4882_exit(void) /* Restore physical bus */ if (i2c_add_adapter(&amd756_smbus)) - dev_err(&amd756_smbus.dev, "Physical bus restoration " - "failed\n"); + printk(KERN_ERR "i2c-amd756-s4882: " + "Physical bus restoration failed\n"); } MODULE_AUTHOR("Jean Delvare "); diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c index 6a8995dfd0bb..d1a4cbcf2aa4 100644 --- a/drivers/i2c/busses/i2c-nforce2-s4985.c +++ b/drivers/i2c/busses/i2c-nforce2-s4985.c @@ -150,6 +150,16 @@ static int __init nforce2_s4985_init(void) int i, error; union i2c_smbus_data ioconfig; + /* Configure the PCA9556 multiplexer */ + ioconfig.byte = 0x00; /* All I/O to output mode */ + error = i2c_smbus_xfer(nforce2_smbus, 0x18, 0, I2C_SMBUS_WRITE, 0x03, + I2C_SMBUS_BYTE_DATA, &ioconfig); + if (error) { + dev_err(&nforce2_smbus->dev, "PCA9556 configuration failed\n"); + error = -EIO; + goto ERROR0; + } + /* Unregister physical bus */ if (!nforce2_smbus) return -ENODEV; @@ -191,24 +201,13 @@ static int __init nforce2_s4985_init(void) s4985_algo[3].smbus_xfer = nforce2_access_virt3; s4985_algo[4].smbus_xfer = nforce2_access_virt4; - /* Configure the PCA9556 multiplexer */ - ioconfig.byte = 0x00; /* All I/O to output mode */ - error = nforce2_smbus->algo->smbus_xfer(nforce2_smbus, 0x18, 0, - I2C_SMBUS_WRITE, 0x03, - I2C_SMBUS_BYTE_DATA, &ioconfig); - if (error) { - dev_err(&nforce2_smbus->dev, "PCA9556 configuration failed\n"); - error = -EIO; - goto ERROR3; - } - /* Register virtual adapters */ for (i = 0; i < 5; i++) { error = i2c_add_adapter(s4985_adapter + i); if (error) { - dev_err(&nforce2_smbus->dev, - "Virtual adapter %d registration " - "failed, module not inserted\n", i); + printk(KERN_ERR "i2c-nforce2-s4985: " + "Virtual adapter %d registration " + "failed, module not inserted\n", i); for (i--; i >= 0; i--) i2c_del_adapter(s4985_adapter + i); goto ERROR3; @@ -245,8 +244,8 @@ static void __exit nforce2_s4985_exit(void) /* Restore physical bus */ if (i2c_add_adapter(nforce2_smbus)) - dev_err(&nforce2_smbus->dev, "Physical bus restoration " - "failed\n"); + printk(KERN_ERR "i2c-nforce2-s4985: " + "Physical bus restoration failed\n"); } MODULE_AUTHOR("Jean Delvare "); diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 0a79f7661017..7608df83d6d1 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -654,6 +654,10 @@ int i2c_del_adapter(struct i2c_adapter *adap) dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name); + /* Clear the device structure in case this adapter is ever going to be + added again */ + memset(&adap->dev, 0, sizeof(adap->dev)); + out_unlock: mutex_unlock(&core_lock); return res; -- cgit v1.2.3 From 68be3363740e4ac3b4309faebcdf8fe5bf62ed2f Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:05 +0200 Subject: i2c: Convert the eeprom driver to a new-style i2c driver The new-style eeprom driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/i2c/chips/eeprom.c | 92 ++++++++++++++++++++-------------------------- 1 file changed, 40 insertions(+), 52 deletions(-) diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index 373ea8d8fe8f..2c27193aeaa0 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -47,7 +47,6 @@ enum eeprom_nature { /* Each client has this additional data */ struct eeprom_data { - struct i2c_client client; struct mutex update_lock; u8 valid; /* bitfield, bit!=0 if slice is valid */ unsigned long last_updated[8]; /* In jiffies, 8 slices */ @@ -56,19 +55,6 @@ struct eeprom_data { }; -static int eeprom_attach_adapter(struct i2c_adapter *adapter); -static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind); -static int eeprom_detach_client(struct i2c_client *client); - -/* This is the driver that will be inserted */ -static struct i2c_driver eeprom_driver = { - .driver = { - .name = "eeprom", - }, - .attach_adapter = eeprom_attach_adapter, - .detach_client = eeprom_detach_client, -}; - static void eeprom_update_client(struct i2c_client *client, u8 slice) { struct eeprom_data *data = i2c_get_clientdata(client); @@ -148,25 +134,17 @@ static struct bin_attribute eeprom_attr = { .read = eeprom_read, }; -static int eeprom_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & (I2C_CLASS_DDC | I2C_CLASS_SPD))) - return 0; - return i2c_probe(adapter, &addr_data, eeprom_detect); -} - -/* This function is called by i2c_probe */ -static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int eeprom_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct eeprom_data *data; - int err = 0; + struct i2c_adapter *adapter = client->adapter; /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all addresses 0x50-0x57, but we only care about 0x50. So decline attaching to addresses >= 0x51 on DDC buses */ - if (!(adapter->class & I2C_CLASS_SPD) && address >= 0x51) - goto exit; + if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51) + return -ENODEV; /* There are four ways we can read the EEPROM data: (1) I2C block reads (faster, but unsupported by most adapters) @@ -177,32 +155,33 @@ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) because all known adapters support one of the first two. */ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA) && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) - goto exit; + return -ENODEV; + + strlcpy(info->type, "eeprom", I2C_NAME_SIZE); + + return 0; +} + +static int eeprom_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = client->adapter; + struct eeprom_data *data; + int err; if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - client = &data->client; memset(data->data, 0xff, EEPROM_SIZE); i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &eeprom_driver; - - /* Fill in the remaining client fields */ - strlcpy(client->name, "eeprom", I2C_NAME_SIZE); mutex_init(&data->update_lock); data->nature = UNKNOWN; - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_kfree; - /* Detect the Vaio nature of EEPROMs. We use the "PCG-" or "VGN-" prefix as the signature. */ - if (address == 0x57 + if (client->addr == 0x57 && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) { char name[4]; @@ -221,33 +200,42 @@ static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) /* create the sysfs eeprom file */ err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr); if (err) - goto exit_detach; + goto exit_kfree; return 0; -exit_detach: - i2c_detach_client(client); exit_kfree: kfree(data); exit: return err; } -static int eeprom_detach_client(struct i2c_client *client) +static int eeprom_remove(struct i2c_client *client) { - int err; - sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr); - - err = i2c_detach_client(client); - if (err) - return err; - kfree(i2c_get_clientdata(client)); return 0; } +static const struct i2c_device_id eeprom_id[] = { + { "eeprom", 0 }, + { } +}; + +static struct i2c_driver eeprom_driver = { + .driver = { + .name = "eeprom", + }, + .probe = eeprom_probe, + .remove = eeprom_remove, + .id_table = eeprom_id, + + .class = I2C_CLASS_DDC | I2C_CLASS_SPD, + .detect = eeprom_detect, + .address_data = &addr_data, +}; + static int __init eeprom_init(void) { return i2c_add_driver(&eeprom_driver); -- cgit v1.2.3 From 8b77e6ac4911a79993e583ece719736a9e035b1d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:06 +0200 Subject: i2c: Convert the pcf8591 driver to a new-style i2c driver The new-style pcf8591 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/i2c/chips/pcf8591.c | 94 +++++++++++++++++++-------------------------- 1 file changed, 40 insertions(+), 54 deletions(-) diff --git a/drivers/i2c/chips/pcf8591.c b/drivers/i2c/chips/pcf8591.c index db735379f22f..16ce3e193776 100644 --- a/drivers/i2c/chips/pcf8591.c +++ b/drivers/i2c/chips/pcf8591.c @@ -72,28 +72,15 @@ MODULE_PARM_DESC(input_mode, #define REG_TO_SIGNED(reg) (((reg) & 0x80)?((reg) - 256):(reg)) struct pcf8591_data { - struct i2c_client client; struct mutex update_lock; u8 control; u8 aout; }; -static int pcf8591_attach_adapter(struct i2c_adapter *adapter); -static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind); -static int pcf8591_detach_client(struct i2c_client *client); static void pcf8591_init_client(struct i2c_client *client); static int pcf8591_read_channel(struct device *dev, int channel); -/* This is the driver that will be inserted */ -static struct i2c_driver pcf8591_driver = { - .driver = { - .name = "pcf8591", - }, - .attach_adapter = pcf8591_attach_adapter, - .detach_client = pcf8591_detach_client, -}; - /* following are the sysfs callback functions */ #define show_in_channel(channel) \ static ssize_t show_in##channel##_input(struct device *dev, struct device_attribute *attr, char *buf) \ @@ -180,58 +167,46 @@ static const struct attribute_group pcf8591_attr_group_opt = { /* * Real code */ -static int pcf8591_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_probe(adapter, &addr_data, pcf8591_detect); -} -/* This function is called by i2c_probe */ -static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int pcf8591_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct pcf8591_data *data; - int err = 0; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) - goto exit; + return -ENODEV; + + /* Now, we would do the remaining detection. But the PCF8591 is plainly + impossible to detect! Stupid chip. */ + + strlcpy(info->type, "pcf8591", I2C_NAME_SIZE); + + return 0; +} + +static int pcf8591_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pcf8591_data *data; + int err; - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. */ if (!(data = kzalloc(sizeof(struct pcf8591_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - client = &data->client; i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &pcf8591_driver; - - /* Now, we would do the remaining detection. But the PCF8591 is plainly - impossible to detect! Stupid chip. */ - - /* Determine the chip type - only one kind supported! */ - if (kind <= 0) - kind = pcf8591; - - /* Fill in the remaining client fields and put it into the global - list */ - strlcpy(client->name, "pcf8591", I2C_NAME_SIZE); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_kfree; - /* Initialize the PCF8591 chip */ pcf8591_init_client(client); /* Register sysfs hooks */ err = sysfs_create_group(&client->dev.kobj, &pcf8591_attr_group); if (err) - goto exit_detach; + goto exit_kfree; /* Register input2 if not in "two differential inputs" mode */ if (input_mode != 3) { @@ -252,24 +227,16 @@ static int pcf8591_detect(struct i2c_adapter *adapter, int address, int kind) exit_sysfs_remove: sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group_opt); sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group); -exit_detach: - i2c_detach_client(client); exit_kfree: kfree(data); exit: return err; } -static int pcf8591_detach_client(struct i2c_client *client) +static int pcf8591_remove(struct i2c_client *client) { - int err; - sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group_opt); sysfs_remove_group(&client->dev.kobj, &pcf8591_attr_group); - - if ((err = i2c_detach_client(client))) - return err; - kfree(i2c_get_clientdata(client)); return 0; } @@ -316,6 +283,25 @@ static int pcf8591_read_channel(struct device *dev, int channel) return (10 * value); } +static const struct i2c_device_id pcf8591_id[] = { + { "pcf8591", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, pcf8591_id); + +static struct i2c_driver pcf8591_driver = { + .driver = { + .name = "pcf8591", + }, + .probe = pcf8591_probe, + .remove = pcf8591_remove, + .id_table = pcf8591_id, + + .class = I2C_CLASS_HWMON, /* Nearest choice */ + .detect = pcf8591_detect, + .address_data = &addr_data, +}; + static int __init pcf8591_init(void) { if (input_mode < 0 || input_mode > 3) { -- cgit v1.2.3 From 833bedb813689807385ae73175389c73a3f855c1 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:06 +0200 Subject: i2c: Convert the pcf8574 driver to a new-style i2c driver The new-style pcf8574 driver implements the optional detect() callback to cover the use cases of the legacy driver. Warning: users will now have to use the force module parameter to get the driver to attach to their device. That's not a bad thing as these devices can't be detected anyway. Note that this doesn't change the fact that this driver is deprecated in favor of gpio/pcf857x. Signed-off-by: Jean Delvare --- Documentation/i2c/chips/pcf8574 | 12 ++--- drivers/i2c/chips/pcf8574.c | 108 +++++++++++++++++----------------------- 2 files changed, 51 insertions(+), 69 deletions(-) diff --git a/Documentation/i2c/chips/pcf8574 b/Documentation/i2c/chips/pcf8574 index 5c1ad1376b62..235815c075ff 100644 --- a/Documentation/i2c/chips/pcf8574 +++ b/Documentation/i2c/chips/pcf8574 @@ -4,13 +4,13 @@ Kernel driver pcf8574 Supported chips: * Philips PCF8574 Prefix: 'pcf8574' - Addresses scanned: I2C 0x20 - 0x27 + Addresses scanned: none Datasheet: Publicly available at the Philips Semiconductors website http://www.semiconductors.philips.com/pip/PCF8574P.html * Philips PCF8574A Prefix: 'pcf8574a' - Addresses scanned: I2C 0x38 - 0x3f + Addresses scanned: none Datasheet: Publicly available at the Philips Semiconductors website http://www.semiconductors.philips.com/pip/PCF8574P.html @@ -38,12 +38,10 @@ For more informations see the datasheet. Accessing PCF8574(A) via /sys interface ------------------------------------- -! Be careful ! The PCF8574(A) is plainly impossible to detect ! Stupid chip. -So every chip with address in the interval [20..27] and [38..3f] are -detected as PCF8574(A). If you have other chips in this address -range, the workaround is to load this module after the one -for your others chips. +So, you have to pass the I2C bus and address of the installed PCF857A +and PCF8574A devices explicitly to the driver at load time via the +force=... parameter. On detection (i.e. insmod, modprobe et al.), directories are being created for each detected PCF8574(A): diff --git a/drivers/i2c/chips/pcf8574.c b/drivers/i2c/chips/pcf8574.c index 1b3db2b3ada9..6ec309894c88 100644 --- a/drivers/i2c/chips/pcf8574.c +++ b/drivers/i2c/chips/pcf8574.c @@ -38,37 +38,19 @@ #include #include -/* Addresses to scan */ -static const unsigned short normal_i2c[] = { - 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, - 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - I2C_CLIENT_END -}; +/* Addresses to scan: none, device can't be detected */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a); /* Each client has this additional data */ struct pcf8574_data { - struct i2c_client client; - int write; /* Remember last written value */ }; -static int pcf8574_attach_adapter(struct i2c_adapter *adapter); -static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind); -static int pcf8574_detach_client(struct i2c_client *client); static void pcf8574_init_client(struct i2c_client *client); -/* This is the driver that will be inserted */ -static struct i2c_driver pcf8574_driver = { - .driver = { - .name = "pcf8574", - }, - .attach_adapter = pcf8574_attach_adapter, - .detach_client = pcf8574_detach_client, -}; - /* following are the sysfs callback functions */ static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf) { @@ -119,41 +101,22 @@ static const struct attribute_group pcf8574_attr_group = { * Real code */ -static int pcf8574_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_probe(adapter, &addr_data, pcf8574_detect); -} - -/* This function is called by i2c_probe */ -static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int pcf8574_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct pcf8574_data *data; - int err = 0; - const char *client_name = ""; + struct i2c_adapter *adapter = client->adapter; + const char *client_name; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. */ - if (!(data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &pcf8574_driver; + return -ENODEV; /* Now, we would do the remaining detection. But the PCF8574 is plainly impossible to detect! Stupid chip. */ /* Determine the chip type */ if (kind <= 0) { - if (address >= 0x38 && address <= 0x3f) + if (client->addr >= 0x38 && client->addr <= 0x3f) kind = pcf8574a; else kind = pcf8574; @@ -163,40 +126,43 @@ static int pcf8574_detect(struct i2c_adapter *adapter, int address, int kind) client_name = "pcf8574a"; else client_name = "pcf8574"; + strlcpy(info->type, client_name, I2C_NAME_SIZE); - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(client->name, client_name, I2C_NAME_SIZE); + return 0; +} + +static int pcf8574_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pcf8574_data *data; + int err; + + data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; - /* Initialize the PCF8574 chip */ pcf8574_init_client(client); /* Register sysfs hooks */ err = sysfs_create_group(&client->dev.kobj, &pcf8574_attr_group); if (err) - goto exit_detach; + goto exit_free; return 0; - exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int pcf8574_detach_client(struct i2c_client *client) +static int pcf8574_remove(struct i2c_client *client) { - int err; - sysfs_remove_group(&client->dev.kobj, &pcf8574_attr_group); - - if ((err = i2c_detach_client(client))) - return err; - kfree(i2c_get_clientdata(client)); return 0; } @@ -208,6 +174,24 @@ static void pcf8574_init_client(struct i2c_client *client) data->write = -EAGAIN; } +static const struct i2c_device_id pcf8574_id[] = { + { "pcf8574", 0 }, + { "pcf8574a", 0 }, + { } +}; + +static struct i2c_driver pcf8574_driver = { + .driver = { + .name = "pcf8574", + }, + .probe = pcf8574_probe, + .remove = pcf8574_remove, + .id_table = pcf8574_id, + + .detect = pcf8574_detect, + .address_data = &addr_data, +}; + static int __init pcf8574_init(void) { return i2c_add_driver(&pcf8574_driver); -- cgit v1.2.3 From 97addff6def3f8e228a634fa017589f45c69de5c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:06 +0200 Subject: i2c: Convert the pcf8575 driver to a new-style i2c driver The new-style pcf8575 driver implements the optional detect() callback to cover the use cases of the legacy driver. Warning: users will now have to use the force module parameter to get the driver to attach to their device. That's not a bad thing as these devices can't be detected anyway. Note that this doesn't change the fact that this driver is deprecated in favor of gpio/pcf857x. Signed-off-by: Jean Delvare --- Documentation/i2c/chips/pcf8575 | 9 ++-- drivers/i2c/chips/pcf8575.c | 96 +++++++++++++++++------------------------ 2 files changed, 43 insertions(+), 62 deletions(-) diff --git a/Documentation/i2c/chips/pcf8575 b/Documentation/i2c/chips/pcf8575 index 25f5698a61cf..40b268eb276f 100644 --- a/Documentation/i2c/chips/pcf8575 +++ b/Documentation/i2c/chips/pcf8575 @@ -40,12 +40,9 @@ Detection --------- There is no method known to detect whether a chip on a given I2C address is -a PCF8575 or whether it is any other I2C device. So there are two alternatives -to let the driver find the installed PCF8575 devices: -- Load this driver after any other I2C driver for I2C devices with addresses - in the range 0x20 .. 0x27. -- Pass the I2C bus and address of the installed PCF8575 devices explicitly to - the driver at load time via the probe=... or force=... parameters. +a PCF8575 or whether it is any other I2C device, so you have to pass the I2C +bus and address of the installed PCF8575 devices explicitly to the driver at +load time via the force=... parameter. /sys interface -------------- diff --git a/drivers/i2c/chips/pcf8575.c b/drivers/i2c/chips/pcf8575.c index 3ea08ac0bfa3..07fd7cb3c57d 100644 --- a/drivers/i2c/chips/pcf8575.c +++ b/drivers/i2c/chips/pcf8575.c @@ -32,11 +32,8 @@ #include /* kzalloc() */ #include /* sysfs_create_group() */ -/* Addresses to scan */ -static const unsigned short normal_i2c[] = { - 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, - I2C_CLIENT_END -}; +/* Addresses to scan: none, device can't be detected */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD; @@ -44,24 +41,9 @@ I2C_CLIENT_INSMOD; /* Each client has this additional data */ struct pcf8575_data { - struct i2c_client client; int write; /* last written value, or error code */ }; -static int pcf8575_attach_adapter(struct i2c_adapter *adapter); -static int pcf8575_detect(struct i2c_adapter *adapter, int address, int kind); -static int pcf8575_detach_client(struct i2c_client *client); - -/* This is the driver that will be inserted */ -static struct i2c_driver pcf8575_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "pcf8575", - }, - .attach_adapter = pcf8575_attach_adapter, - .detach_client = pcf8575_detach_client, -}; - /* following are the sysfs callback functions */ static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf) @@ -126,75 +108,77 @@ static const struct attribute_group pcf8575_attr_group = { * Real code */ -static int pcf8575_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int pcf8575_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - return i2c_probe(adapter, &addr_data, pcf8575_detect); + struct i2c_adapter *adapter = client->adapter; + + if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) + return -ENODEV; + + /* This is the place to detect whether the chip at the specified + address really is a PCF8575 chip. However, there is no method known + to detect whether an I2C chip is a PCF8575 or any other I2C chip. */ + + strlcpy(info->type, "pcf8575", I2C_NAME_SIZE); + + return 0; } -/* This function is called by i2c_probe */ -static int pcf8575_detect(struct i2c_adapter *adapter, int address, int kind) +static int pcf8575_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; struct pcf8575_data *data; - int err = 0; - - if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) - goto exit; + int err; - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. */ data = kzalloc(sizeof(struct pcf8575_data), GFP_KERNEL); if (!data) { err = -ENOMEM; goto exit; } - client = &data->client; i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &pcf8575_driver; - strlcpy(client->name, "pcf8575", I2C_NAME_SIZE); data->write = -EAGAIN; - /* This is the place to detect whether the chip at the specified - address really is a PCF8575 chip. However, there is no method known - to detect whether an I2C chip is a PCF8575 or any other I2C chip. */ - - /* Tell the I2C layer a new client has arrived */ - err = i2c_attach_client(client); - if (err) - goto exit_free; - /* Register sysfs hooks */ err = sysfs_create_group(&client->dev.kobj, &pcf8575_attr_group); if (err) - goto exit_detach; + goto exit_free; return 0; -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int pcf8575_detach_client(struct i2c_client *client) +static int pcf8575_remove(struct i2c_client *client) { - int err; - sysfs_remove_group(&client->dev.kobj, &pcf8575_attr_group); - - err = i2c_detach_client(client); - if (err) - return err; - kfree(i2c_get_clientdata(client)); return 0; } +static const struct i2c_device_id pcf8575_id[] = { + { "pcf8575", 0 }, + { } +}; + +static struct i2c_driver pcf8575_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "pcf8575", + }, + .probe = pcf8575_probe, + .remove = pcf8575_remove, + .id_table = pcf8575_id, + + .detect = pcf8575_detect, + .address_data = &addr_data, +}; + static int __init pcf8575_init(void) { return i2c_add_driver(&pcf8575_driver); -- cgit v1.2.3 From 3d63430a26b91fe3daee0dd933f899c225e66daa Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:07 +0200 Subject: i2c: Convert the pca9539 driver to a new-style i2c driver The new-style pca9539 driver implements the optional detect() callback to cover the use cases of the legacy driver. Warning: users will now have to use the force module parameter to get the driver to attach to their device. That's not a bad thing as these devices can't be detected anyway. Note that this doesn't change the fact that this driver is deprecated in favor of gpio/pca953x. Signed-off-by: Jean Delvare --- Documentation/i2c/chips/pca9539 | 10 +++- drivers/i2c/chips/pca9539.c | 109 ++++++++++++---------------------------- 2 files changed, 42 insertions(+), 77 deletions(-) diff --git a/Documentation/i2c/chips/pca9539 b/Documentation/i2c/chips/pca9539 index 1d81c530c4a5..6aff890088b1 100644 --- a/Documentation/i2c/chips/pca9539 +++ b/Documentation/i2c/chips/pca9539 @@ -7,7 +7,7 @@ drivers/gpio/pca9539.c instead. Supported chips: * Philips PCA9539 Prefix: 'pca9539' - Addresses scanned: 0x74 - 0x77 + Addresses scanned: none Datasheet: http://www.semiconductors.philips.com/acrobat/datasheets/PCA9539_2.pdf @@ -23,6 +23,14 @@ The input sense can also be inverted. The 16 lines are split between two bytes. +Detection +--------- + +The PCA9539 is difficult to detect and not commonly found in PC machines, +so you have to pass the I2C bus and address of the installed PCA9539 +devices explicitly to the driver at load time via the force=... parameter. + + Sysfs entries ------------- diff --git a/drivers/i2c/chips/pca9539.c b/drivers/i2c/chips/pca9539.c index 58ab7f26be26..270de4e56a81 100644 --- a/drivers/i2c/chips/pca9539.c +++ b/drivers/i2c/chips/pca9539.c @@ -14,8 +14,8 @@ #include #include -/* Addresses to scan */ -static unsigned short normal_i2c[] = {0x74, 0x75, 0x76, 0x77, I2C_CLIENT_END}; +/* Addresses to scan: none, device is not autodetected */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; /* Insmod parameters */ I2C_CLIENT_INSMOD_1(pca9539); @@ -32,23 +32,6 @@ enum pca9539_cmd PCA9539_DIRECTION_1 = 7, }; -static int pca9539_attach_adapter(struct i2c_adapter *adapter); -static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind); -static int pca9539_detach_client(struct i2c_client *client); - -/* This is the driver that will be inserted */ -static struct i2c_driver pca9539_driver = { - .driver = { - .name = "pca9539", - }, - .attach_adapter = pca9539_attach_adapter, - .detach_client = pca9539_detach_client, -}; - -struct pca9539_data { - struct i2c_client client; -}; - /* following are the sysfs callback functions */ static ssize_t pca9539_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -105,77 +88,51 @@ static struct attribute_group pca9539_defattr_group = { .attrs = pca9539_attributes, }; -static int pca9539_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int pca9539_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - return i2c_probe(adapter, &addr_data, pca9539_detect); -} - -/* This function is called by i2c_probe */ -static int pca9539_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client; - struct pca9539_data *data; - int err = 0; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. */ - if (!(data = kzalloc(sizeof(struct pca9539_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &pca9539_driver; - - if (kind < 0) { - /* Detection: the pca9539 only has 8 registers (0-7). - A read of 7 should succeed, but a read of 8 should fail. */ - if ((i2c_smbus_read_byte_data(client, 7) < 0) || - (i2c_smbus_read_byte_data(client, 8) >= 0)) - goto exit_kfree; - } - - strlcpy(client->name, "pca9539", I2C_NAME_SIZE); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_kfree; + return -ENODEV; - /* Register sysfs hooks */ - err = sysfs_create_group(&client->dev.kobj, - &pca9539_defattr_group); - if (err) - goto exit_detach; + strlcpy(info->type, "pca9539", I2C_NAME_SIZE); return 0; - -exit_detach: - i2c_detach_client(client); -exit_kfree: - kfree(data); -exit: - return err; } -static int pca9539_detach_client(struct i2c_client *client) +static int pca9539_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - int err; + /* Register sysfs hooks */ + return sysfs_create_group(&client->dev.kobj, + &pca9539_defattr_group); +} +static int pca9539_remove(struct i2c_client *client) +{ sysfs_remove_group(&client->dev.kobj, &pca9539_defattr_group); - - if ((err = i2c_detach_client(client))) - return err; - - kfree(i2c_get_clientdata(client)); return 0; } +static const struct i2c_device_id pca9539_id[] = { + { "pca9539", 0 }, + { } +}; + +static struct i2c_driver pca9539_driver = { + .driver = { + .name = "pca9539", + }, + .probe = pca9539_probe, + .remove = pca9539_remove, + .id_table = pca9539_id, + + .detect = pca9539_detect, + .address_data = &addr_data, +}; + static int __init pca9539_init(void) { return i2c_add_driver(&pca9539_driver); -- cgit v1.2.3 From bd8d421f7ca9f8da3d820d28379d796500f69529 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:07 +0200 Subject: i2c: Convert the max6875 driver to a new-style i2c driver The new-style max6875 driver implements the optional detect() callback to cover the use cases of the legacy driver. I'm curious if anyone really needs this though, so it might be removed in the feature. Signed-off-by: Jean Delvare --- Documentation/i2c/chips/max6875 | 2 +- drivers/i2c/chips/max6875.c | 120 ++++++++++++++++------------------------ 2 files changed, 50 insertions(+), 72 deletions(-) diff --git a/Documentation/i2c/chips/max6875 b/Documentation/i2c/chips/max6875 index a0cd8af2f408..10ca43cd1a72 100644 --- a/Documentation/i2c/chips/max6875 +++ b/Documentation/i2c/chips/max6875 @@ -49,7 +49,7 @@ $ modprobe max6875 force=0,0x50 The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple addresses. For example, for address 0x50, it also reserves 0x51. -The even-address instance is called 'max6875', the odd one is 'max6875 subclient'. +The even-address instance is called 'max6875', the odd one is 'dummy'. Programming the chip using i2c-dev diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c index 5a0285d8b6f9..033d9d81ec8a 100644 --- a/drivers/i2c/chips/max6875.c +++ b/drivers/i2c/chips/max6875.c @@ -53,7 +53,7 @@ I2C_CLIENT_INSMOD_1(max6875); /* Each client has this additional data */ struct max6875_data { - struct i2c_client client; + struct i2c_client *fake_client; struct mutex update_lock; u32 valid; @@ -61,19 +61,6 @@ struct max6875_data { unsigned long last_updated[USER_EEPROM_SLICES]; }; -static int max6875_attach_adapter(struct i2c_adapter *adapter); -static int max6875_detect(struct i2c_adapter *adapter, int address, int kind); -static int max6875_detach_client(struct i2c_client *client); - -/* This is the driver that will be inserted */ -static struct i2c_driver max6875_driver = { - .driver = { - .name = "max6875", - }, - .attach_adapter = max6875_attach_adapter, - .detach_client = max6875_detach_client, -}; - static void max6875_update_slice(struct i2c_client *client, int slice) { struct max6875_data *data = i2c_get_clientdata(client); @@ -159,96 +146,87 @@ static struct bin_attribute user_eeprom_attr = { .read = max6875_read, }; -static int max6875_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int max6875_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - return i2c_probe(adapter, &addr_data, max6875_detect); -} - -/* This function is called by i2c_probe */ -static int max6875_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *real_client; - struct i2c_client *fake_client; - struct max6875_data *data; - int err; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA | I2C_FUNC_SMBUS_READ_BYTE)) - return 0; + return -ENODEV; /* Only check even addresses */ - if (address & 1) - return 0; + if (client->addr & 1) + return -ENODEV; + + strlcpy(info->type, "max6875", I2C_NAME_SIZE); + + return 0; +} + +static int max6875_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max6875_data *data; + int err; if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL))) return -ENOMEM; /* A fake client is created on the odd address */ - if (!(fake_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL))) { + data->fake_client = i2c_new_dummy(client->adapter, client->addr + 1); + if (!data->fake_client) { err = -ENOMEM; - goto exit_kfree1; + goto exit_kfree; } /* Init real i2c_client */ - real_client = &data->client; - i2c_set_clientdata(real_client, data); - real_client->addr = address; - real_client->adapter = adapter; - real_client->driver = &max6875_driver; - strlcpy(real_client->name, "max6875", I2C_NAME_SIZE); + i2c_set_clientdata(client, data); mutex_init(&data->update_lock); - /* Init fake client data */ - i2c_set_clientdata(fake_client, NULL); - fake_client->addr = address | 1; - fake_client->adapter = adapter; - fake_client->driver = &max6875_driver; - strlcpy(fake_client->name, "max6875 subclient", I2C_NAME_SIZE); - - if ((err = i2c_attach_client(real_client)) != 0) - goto exit_kfree2; - - if ((err = i2c_attach_client(fake_client)) != 0) - goto exit_detach1; - - err = sysfs_create_bin_file(&real_client->dev.kobj, &user_eeprom_attr); + err = sysfs_create_bin_file(&client->dev.kobj, &user_eeprom_attr); if (err) - goto exit_detach2; + goto exit_remove_fake; return 0; -exit_detach2: - i2c_detach_client(fake_client); -exit_detach1: - i2c_detach_client(real_client); -exit_kfree2: - kfree(fake_client); -exit_kfree1: +exit_remove_fake: + i2c_unregister_device(data->fake_client); +exit_kfree: kfree(data); return err; } -/* Will be called for both the real client and the fake client */ -static int max6875_detach_client(struct i2c_client *client) +static int max6875_remove(struct i2c_client *client) { - int err; struct max6875_data *data = i2c_get_clientdata(client); - /* data is NULL for the fake client */ - if (data) - sysfs_remove_bin_file(&client->dev.kobj, &user_eeprom_attr); + i2c_unregister_device(data->fake_client); - err = i2c_detach_client(client); - if (err) - return err; + sysfs_remove_bin_file(&client->dev.kobj, &user_eeprom_attr); + kfree(data); - if (data) /* real client */ - kfree(data); - else /* fake client */ - kfree(client); return 0; } +static const struct i2c_device_id max6875_id[] = { + { "max6875", 0 }, + { } +}; + +static struct i2c_driver max6875_driver = { + .driver = { + .name = "max6875", + }, + .probe = max6875_probe, + .remove = max6875_remove, + .id_table = max6875_id, + + .detect = max6875_detect, + .address_data = &addr_data, +}; + static int __init max6875_init(void) { return i2c_add_driver(&max6875_driver); -- cgit v1.2.3 From 61c91f7ded640bb2b340cc89d9ca3a3ca0229c74 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:07 +0200 Subject: w1/ds2482: Convert to a new-style driver The new-style ds2482 driver implements the optional detect() callback to cover the use cases of the legacy driver. I'm curious if anyone really needs this though, so it might be removed in the feature. Signed-off-by: Jean Delvare --- drivers/w1/masters/ds2482.c | 104 +++++++++++++++++++------------------------- 1 file changed, 44 insertions(+), 60 deletions(-) diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c index 0fd5820d5c61..df52cb355f7d 100644 --- a/drivers/w1/masters/ds2482.c +++ b/drivers/w1/masters/ds2482.c @@ -94,21 +94,31 @@ static const u8 ds2482_chan_rd[8] = #define DS2482_REG_STS_1WB 0x01 -static int ds2482_attach_adapter(struct i2c_adapter *adapter); -static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind); -static int ds2482_detach_client(struct i2c_client *client); +static int ds2482_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int ds2482_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int ds2482_remove(struct i2c_client *client); /** * Driver data (common to all clients) */ +static const struct i2c_device_id ds2482_id[] = { + { "ds2482", 0 }, + { } +}; + static struct i2c_driver ds2482_driver = { .driver = { .owner = THIS_MODULE, .name = "ds2482", }, - .attach_adapter = ds2482_attach_adapter, - .detach_client = ds2482_detach_client, + .probe = ds2482_probe, + .remove = ds2482_remove, + .id_table = ds2482_id, + .detect = ds2482_detect, + .address_data = &addr_data, }; /* @@ -124,7 +134,7 @@ struct ds2482_w1_chan { }; struct ds2482_data { - struct i2c_client client; + struct i2c_client *client; struct mutex access_lock; /* 1-wire interface(s) */ @@ -147,7 +157,7 @@ struct ds2482_data { static inline int ds2482_select_register(struct ds2482_data *pdev, u8 read_ptr) { if (pdev->read_prt != read_ptr) { - if (i2c_smbus_write_byte_data(&pdev->client, + if (i2c_smbus_write_byte_data(pdev->client, DS2482_CMD_SET_READ_PTR, read_ptr) < 0) return -1; @@ -167,7 +177,7 @@ static inline int ds2482_select_register(struct ds2482_data *pdev, u8 read_ptr) */ static inline int ds2482_send_cmd(struct ds2482_data *pdev, u8 cmd) { - if (i2c_smbus_write_byte(&pdev->client, cmd) < 0) + if (i2c_smbus_write_byte(pdev->client, cmd) < 0) return -1; pdev->read_prt = DS2482_PTR_CODE_STATUS; @@ -187,7 +197,7 @@ static inline int ds2482_send_cmd(struct ds2482_data *pdev, u8 cmd) static inline int ds2482_send_cmd_data(struct ds2482_data *pdev, u8 cmd, u8 byte) { - if (i2c_smbus_write_byte_data(&pdev->client, cmd, byte) < 0) + if (i2c_smbus_write_byte_data(pdev->client, cmd, byte) < 0) return -1; /* all cmds leave in STATUS, except CONFIG */ @@ -216,7 +226,7 @@ static int ds2482_wait_1wire_idle(struct ds2482_data *pdev) if (!ds2482_select_register(pdev, DS2482_PTR_CODE_STATUS)) { do { - temp = i2c_smbus_read_byte(&pdev->client); + temp = i2c_smbus_read_byte(pdev->client); } while ((temp >= 0) && (temp & DS2482_REG_STS_1WB) && (++retries < DS2482_WAIT_IDLE_TIMEOUT)); } @@ -238,13 +248,13 @@ static int ds2482_wait_1wire_idle(struct ds2482_data *pdev) */ static int ds2482_set_channel(struct ds2482_data *pdev, u8 channel) { - if (i2c_smbus_write_byte_data(&pdev->client, DS2482_CMD_CHANNEL_SELECT, + if (i2c_smbus_write_byte_data(pdev->client, DS2482_CMD_CHANNEL_SELECT, ds2482_chan_wr[channel]) < 0) return -1; pdev->read_prt = DS2482_PTR_CODE_CHANNEL; pdev->channel = -1; - if (i2c_smbus_read_byte(&pdev->client) == ds2482_chan_rd[channel]) { + if (i2c_smbus_read_byte(pdev->client) == ds2482_chan_rd[channel]) { pdev->channel = channel; return 0; } @@ -368,7 +378,7 @@ static u8 ds2482_w1_read_byte(void *data) ds2482_select_register(pdev, DS2482_PTR_CODE_DATA); /* Read the data byte */ - result = i2c_smbus_read_byte(&pdev->client); + result = i2c_smbus_read_byte(pdev->client); mutex_unlock(&pdev->access_lock); @@ -415,47 +425,38 @@ static u8 ds2482_w1_reset_bus(void *data) } -/** - * Called to see if the device exists on an i2c bus. - */ -static int ds2482_attach_adapter(struct i2c_adapter *adapter) +static int ds2482_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - return i2c_probe(adapter, &addr_data, ds2482_detect); -} + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE_DATA | + I2C_FUNC_SMBUS_BYTE)) + return -ENODEV; + strlcpy(info->type, "ds2482", I2C_NAME_SIZE); -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind) + return 0; +} + +static int ds2482_probe(struct i2c_client *client, + const struct i2c_device_id *id) { struct ds2482_data *data; - struct i2c_client *new_client; - int err = 0; + int err = -ENODEV; int temp1; int idx; - if (!i2c_check_functionality(adapter, - I2C_FUNC_SMBUS_WRITE_BYTE_DATA | - I2C_FUNC_SMBUS_BYTE)) - goto exit; - if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->driver = &ds2482_driver; - new_client->adapter = adapter; + data->client = client; + i2c_set_clientdata(client, data); /* Reset the device (sets the read_ptr to status) */ if (ds2482_send_cmd(data, DS2482_CMD_RESET) < 0) { - dev_dbg(&adapter->dev, "DS2482 reset failed at 0x%02x.\n", - address); + dev_warn(&client->dev, "DS2482 reset failed.\n"); goto exit_free; } @@ -463,10 +464,10 @@ static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind) ndelay(525); /* Read the status byte - only reset bit and line should be set */ - temp1 = i2c_smbus_read_byte(new_client); + temp1 = i2c_smbus_read_byte(client); if (temp1 != (DS2482_REG_STS_LL | DS2482_REG_STS_RST)) { - dev_dbg(&adapter->dev, "DS2482 (0x%02x) reset status " - "0x%02X - not a DS2482\n", address, temp1); + dev_warn(&client->dev, "DS2482 reset status " + "0x%02X - not a DS2482\n", temp1); goto exit_free; } @@ -478,16 +479,8 @@ static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind) /* Set all config items to 0 (off) */ ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, 0xF0); - /* We can fill in the remaining client fields */ - snprintf(new_client->name, sizeof(new_client->name), "ds2482-%d00", - data->w1_count); - mutex_init(&data->access_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Register 1-wire interface(s) */ for (idx = 0; idx < data->w1_count; idx++) { data->w1_ch[idx].pdev = data; @@ -511,8 +504,6 @@ static int ds2482_detect(struct i2c_adapter *adapter, int address, int kind) return 0; exit_w1_remove: - i2c_detach_client(new_client); - for (idx = 0; idx < data->w1_count; idx++) { if (data->w1_ch[idx].pdev != NULL) w1_remove_master_device(&data->w1_ch[idx].w1_bm); @@ -523,10 +514,10 @@ exit: return err; } -static int ds2482_detach_client(struct i2c_client *client) +static int ds2482_remove(struct i2c_client *client) { struct ds2482_data *data = i2c_get_clientdata(client); - int err, idx; + int idx; /* Unregister the 1-wire bridge(s) */ for (idx = 0; idx < data->w1_count; idx++) { @@ -534,13 +525,6 @@ static int ds2482_detach_client(struct i2c_client *client) w1_remove_master_device(&data->w1_ch[idx].w1_bm); } - /* Detach the i2c device */ - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, - "Deregistration failed, client not detached.\n"); - return err; - } - /* Free the memory */ kfree(data); return 0; -- cgit v1.2.3 From 369932f6f840aedfbc717dd156bba7668a11d916 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:08 +0200 Subject: hwmon: (ad7418) Convert to a new-style i2c driver The ad7418 driver is only used on embedded platforms where i2c devices can easily be declared in platform code. Thus a new-style i2c driver makes perfect sense. This lets us get rid of quirky detection code (these chips have no identification registers) and shrinks the binary driver size by 38%. Signed-off-by: Jean Delvare Cc: Alessandro Zummo --- drivers/hwmon/ad7418.c | 109 ++++++++++++------------------------------------- 1 file changed, 26 insertions(+), 83 deletions(-) diff --git a/drivers/hwmon/ad7418.c b/drivers/hwmon/ad7418.c index 466b9ee92797..f97b5b356875 100644 --- a/drivers/hwmon/ad7418.c +++ b/drivers/hwmon/ad7418.c @@ -23,12 +23,9 @@ #include "lm75.h" -#define DRV_VERSION "0.3" +#define DRV_VERSION "0.4" -/* Addresses to scan */ -static const unsigned short normal_i2c[] = { 0x28, I2C_CLIENT_END }; -/* Insmod parameters */ -I2C_CLIENT_INSMOD_3(ad7416, ad7417, ad7418); +enum chips { ad7416, ad7417, ad7418 }; /* AD7418 registers */ #define AD7418_REG_TEMP_IN 0x00 @@ -46,7 +43,6 @@ static const u8 AD7418_REG_TEMP[] = { AD7418_REG_TEMP_IN, AD7418_REG_TEMP_OS }; struct ad7418_data { - struct i2c_client client; struct device *hwmon_dev; struct attribute_group attrs; enum chips type; @@ -58,16 +54,25 @@ struct ad7418_data { u16 in[4]; }; -static int ad7418_attach_adapter(struct i2c_adapter *adapter); -static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind); -static int ad7418_detach_client(struct i2c_client *client); +static int ad7418_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int ad7418_remove(struct i2c_client *client); + +static const struct i2c_device_id ad7418_id[] = { + { "ad7416", ad7416 }, + { "ad7417", ad7417 }, + { "ad7418", ad7418 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad7418_id); static struct i2c_driver ad7418_driver = { .driver = { .name = "ad7418", }, - .attach_adapter = ad7418_attach_adapter, - .detach_client = ad7418_detach_client, + .probe = ad7418_probe, + .remove = ad7418_remove, + .id_table = ad7418_id, }; /* All registers are word-sized, except for the configuration registers. @@ -192,13 +197,6 @@ static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_adc, NULL, 1); static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_adc, NULL, 2); static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_adc, NULL, 3); -static int ad7418_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, ad7418_detect); -} - static struct attribute *ad7416_attributes[] = { &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, @@ -225,98 +223,46 @@ static struct attribute *ad7418_attributes[] = { NULL }; -static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind) +static int ad7418_probe(struct i2c_client *client, + const struct i2c_device_id *id) { - struct i2c_client *client; + struct i2c_adapter *adapter = client->adapter; struct ad7418_data *data; - int err = 0; + int err; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_WORD_DATA)) + I2C_FUNC_SMBUS_WORD_DATA)) { + err = -EOPNOTSUPP; goto exit; + } if (!(data = kzalloc(sizeof(struct ad7418_data), GFP_KERNEL))) { err = -ENOMEM; goto exit; } - client = &data->client; - client->addr = address; - client->adapter = adapter; - client->driver = &ad7418_driver; - i2c_set_clientdata(client, data); mutex_init(&data->lock); - - /* AD7418 has a curious behaviour on registers 6 and 7. They - * both always read 0xC071 and are not documented on the datasheet. - * We use them to detect the chip. - */ - if (kind <= 0) { - int reg, reg6, reg7; - - /* the AD7416 lies within this address range, but I have - * no means to check. - */ - if (address >= 0x48 && address <= 0x4f) { - /* XXX add tests for AD7416 here */ - /* data->type = ad7416; */ - } - /* here we might have AD7417 or AD7418 */ - else if (address >= 0x28 && address <= 0x2f) { - reg6 = i2c_smbus_read_word_data(client, 0x06); - reg7 = i2c_smbus_read_word_data(client, 0x07); - - if (address == 0x28 && reg6 == 0xC071 && reg7 == 0xC071) - data->type = ad7418; - - /* XXX add tests for AD7417 here */ - - - /* both AD7417 and AD7418 have bits 0-5 of - * the CONF2 register at 0 - */ - reg = i2c_smbus_read_byte_data(client, - AD7418_REG_CONF2); - if (reg & 0x3F) - data->type = any_chip; /* detection failed */ - } - } else { - dev_dbg(&adapter->dev, "detection forced\n"); - } - - if (kind > 0) - data->type = kind; - else if (kind < 0 && data->type == any_chip) { - err = -ENODEV; - goto exit_free; - } + data->type = id->driver_data; switch (data->type) { - case any_chip: case ad7416: data->adc_max = 0; data->attrs.attrs = ad7416_attributes; - strlcpy(client->name, "ad7416", I2C_NAME_SIZE); break; case ad7417: data->adc_max = 4; data->attrs.attrs = ad7417_attributes; - strlcpy(client->name, "ad7417", I2C_NAME_SIZE); break; case ad7418: data->adc_max = 1; data->attrs.attrs = ad7418_attributes; - strlcpy(client->name, "ad7418", I2C_NAME_SIZE); break; } - if ((err = i2c_attach_client(client))) - goto exit_free; - dev_info(&client->dev, "%s chip found\n", client->name); /* Initialize the AD7418 chip */ @@ -324,7 +270,7 @@ static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind) /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -336,20 +282,17 @@ static int ad7418_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &data->attrs); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int ad7418_detach_client(struct i2c_client *client) +static int ad7418_remove(struct i2c_client *client) { struct ad7418_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &data->attrs); - i2c_detach_client(client); kfree(data); return 0; } -- cgit v1.2.3 From 65817ed8d1376afff21019b5c0e0109e5a7d9cc0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:08 +0200 Subject: hwmon: (adm1021) Convert to a new-style i2c driver The new-style adm1021 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/adm1021.c | 105 ++++++++++++++++++++++++------------------------ 1 file changed, 53 insertions(+), 52 deletions(-) diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index ecbf69484bf5..b11e06f644b1 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -78,7 +78,6 @@ clearing it. Weird, ey? --Phil */ /* Each client has this additional data */ struct adm1021_data { - struct i2c_client client; struct device *hwmon_dev; enum chips type; @@ -98,23 +97,42 @@ struct adm1021_data { u8 remote_temp_offset_prec; }; -static int adm1021_attach_adapter(struct i2c_adapter *adapter); -static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind); +static int adm1021_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adm1021_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void adm1021_init_client(struct i2c_client *client); -static int adm1021_detach_client(struct i2c_client *client); +static int adm1021_remove(struct i2c_client *client); static struct adm1021_data *adm1021_update_device(struct device *dev); /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ static int read_only; +static const struct i2c_device_id adm1021_id[] = { + { "adm1021", adm1021 }, + { "adm1023", adm1023 }, + { "max1617", max1617 }, + { "max1617a", max1617a }, + { "thmc10", thmc10 }, + { "lm84", lm84 }, + { "gl523sm", gl523sm }, + { "mc1066", mc1066 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1021_id); + /* This is the driver that will be inserted */ static struct i2c_driver adm1021_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adm1021", }, - .attach_adapter = adm1021_attach_adapter, - .detach_client = adm1021_detach_client, + .probe = adm1021_probe, + .remove = adm1021_remove, + .id_table = adm1021_id, + .detect = adm1021_detect, + .address_data = &addr_data, }; static ssize_t show_temp(struct device *dev, @@ -216,13 +234,6 @@ static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); -static int adm1021_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adm1021_detect); -} - static struct attribute *adm1021_attributes[] = { &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp1_min.dev_attr.attr, @@ -243,36 +254,21 @@ static const struct attribute_group adm1021_group = { .attrs = adm1021_attributes, }; -static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm1021_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { + struct i2c_adapter *adapter = client->adapter; int i; - struct i2c_client *client; - struct adm1021_data *data; - int err = 0; const char *type_name = ""; int conv_rate, status, config; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { pr_debug("adm1021: detect failed, " "smbus byte data not supported!\n"); - goto error0; - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access adm1021 register values. */ - - if (!(data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL))) { - pr_debug("adm1021: detect failed, kzalloc failed!\n"); - err = -ENOMEM; - goto error0; + return -ENODEV; } - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &adm1021_driver; status = i2c_smbus_read_byte_data(client, ADM1021_REG_STATUS); conv_rate = i2c_smbus_read_byte_data(client, ADM1021_REG_CONV_RATE_R); @@ -284,8 +280,7 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) || (conv_rate & 0xF8) != 0x00) { pr_debug("adm1021: detect failed, " "chip not detected!\n"); - err = -ENODEV; - goto error1; + return -ENODEV; } } @@ -336,24 +331,36 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) type_name = "mc1066"; } pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n", - type_name, i2c_adapter_id(adapter), address); + type_name, i2c_adapter_id(adapter), client->addr); + strlcpy(info->type, type_name, I2C_NAME_SIZE); - /* Fill in the remaining client fields */ - strlcpy(client->name, type_name, I2C_NAME_SIZE); - data->type = kind; - mutex_init(&data->update_lock); + return 0; +} - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto error1; +static int adm1021_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adm1021_data *data; + int err; + + data = kzalloc(sizeof(struct adm1021_data), GFP_KERNEL); + if (!data) { + pr_debug("adm1021: detect failed, kzalloc failed!\n"); + err = -ENOMEM; + goto error0; + } + + i2c_set_clientdata(client, data); + data->type = id->driver_data; + mutex_init(&data->update_lock); /* Initialize the ADM1021 chip */ - if (kind != lm84 && !read_only) + if (data->type != lm84 && !read_only) adm1021_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &adm1021_group))) - goto error2; + goto error1; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -365,8 +372,6 @@ static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) error3: sysfs_remove_group(&client->dev.kobj, &adm1021_group); -error2: - i2c_detach_client(client); error1: kfree(data); error0: @@ -382,17 +387,13 @@ static void adm1021_init_client(struct i2c_client *client) i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04); } -static int adm1021_detach_client(struct i2c_client *client) +static int adm1021_remove(struct i2c_client *client) { struct adm1021_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &adm1021_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } -- cgit v1.2.3 From 7dbafe021ba360bf25674a7e290d3e4a5c953981 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:08 +0200 Subject: hwmon: (adm1025) Convert to a new-style i2c driver The new-style adm1025 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/adm1025.c | 101 +++++++++++++++++++++++------------------------- 1 file changed, 49 insertions(+), 52 deletions(-) diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c index 1d76de7d75c7..4db04d603ec9 100644 --- a/drivers/hwmon/adm1025.c +++ b/drivers/hwmon/adm1025.c @@ -2,7 +2,7 @@ * adm1025.c * * Copyright (C) 2000 Chen-Yuan Wu - * Copyright (C) 2003-2004 Jean Delvare + * Copyright (C) 2003-2008 Jean Delvare * * The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6 * voltages (including its own power source) and up to two temperatures @@ -109,22 +109,35 @@ static const int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 }; * Functions declaration */ -static int adm1025_attach_adapter(struct i2c_adapter *adapter); -static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind); +static int adm1025_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adm1025_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void adm1025_init_client(struct i2c_client *client); -static int adm1025_detach_client(struct i2c_client *client); +static int adm1025_remove(struct i2c_client *client); static struct adm1025_data *adm1025_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id adm1025_id[] = { + { "adm1025", adm1025 }, + { "ne1619", ne1619 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1025_id); + static struct i2c_driver adm1025_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adm1025", }, - .attach_adapter = adm1025_attach_adapter, - .detach_client = adm1025_detach_client, + .probe = adm1025_probe, + .remove = adm1025_remove, + .id_table = adm1025_id, + .detect = adm1025_detect, + .address_data = &addr_data, }; /* @@ -132,7 +145,6 @@ static struct i2c_driver adm1025_driver = { */ struct adm1025_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -344,13 +356,6 @@ static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm); * Real code */ -static int adm1025_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adm1025_detect); -} - static struct attribute *adm1025_attributes[] = { &sensor_dev_attr_in0_input.dev_attr.attr, &sensor_dev_attr_in1_input.dev_attr.attr, @@ -403,31 +408,16 @@ static const struct attribute_group adm1025_group_in4 = { .attrs = adm1025_attributes_in4, }; -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm1025_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct adm1025_data *data; - int err = 0; + struct i2c_adapter *adapter = client->adapter; const char *name = ""; u8 config; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &adm1025_driver; + return -ENODEV; /* * Now we do the remaining detection. A negative kind means that @@ -448,8 +438,8 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) ADM1025_REG_STATUS2) & 0xBC) != 0x00) { dev_dbg(&adapter->dev, "ADM1025 detection failed at 0x%02x.\n", - address); - goto exit_free; + client->addr); + return -ENODEV; } } @@ -465,7 +455,7 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) } } else if (man_id == 0xA1) { /* Philips */ - if (address != 0x2E + if (client->addr != 0x2E && (chip_id & 0xF0) == 0x20) { /* NE1619 */ kind = ne1619; } @@ -475,7 +465,7 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Unsupported chip (man_id=0x%02X, " "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } @@ -484,23 +474,36 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) } else if (kind == ne1619) { name = "ne1619"; } + strlcpy(info->type, name, I2C_NAME_SIZE); - /* We can fill in the remaining client fields */ - strlcpy(client->name, name, I2C_NAME_SIZE); - mutex_init(&data->update_lock); + return 0; +} - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; +static int adm1025_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adm1025_data *data; + int err; + u8 config; + + data = kzalloc(sizeof(struct adm1025_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); /* Initialize the ADM1025 chip */ adm1025_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &adm1025_group))) - goto exit_detach; + goto exit_free; /* Pin 11 is either in4 (+12V) or VID4 */ + config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG); if (!(config & 0x20)) { if ((err = sysfs_create_group(&client->dev.kobj, &adm1025_group_in4))) @@ -518,8 +521,6 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &adm1025_group); sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: @@ -568,18 +569,14 @@ static void adm1025_init_client(struct i2c_client *client) (reg&0x7E)|0x01); } -static int adm1025_detach_client(struct i2c_client *client) +static int adm1025_remove(struct i2c_client *client) { struct adm1025_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &adm1025_group); sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } -- cgit v1.2.3 From 57f7eb0bcb2316dc264cd26f38b33dd2cf3151c1 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:08 +0200 Subject: hwmon: (adm1026) Convert to a new-style i2c driver The new-style adm1026 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/adm1026.c | 109 +++++++++++++++++++----------------------------- 1 file changed, 44 insertions(+), 65 deletions(-) diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index 904c6ce9d83f..7fe2441fc845 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -259,7 +259,6 @@ struct pwm_data { }; struct adm1026_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; @@ -293,10 +292,11 @@ struct adm1026_data { u8 config3; /* Register value */ }; -static int adm1026_attach_adapter(struct i2c_adapter *adapter); -static int adm1026_detect(struct i2c_adapter *adapter, int address, - int kind); -static int adm1026_detach_client(struct i2c_client *client); +static int adm1026_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adm1026_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adm1026_remove(struct i2c_client *client); static int adm1026_read_value(struct i2c_client *client, u8 reg); static int adm1026_write_value(struct i2c_client *client, u8 reg, int value); static void adm1026_print_gpio(struct i2c_client *client); @@ -305,22 +305,24 @@ static struct adm1026_data *adm1026_update_device(struct device *dev); static void adm1026_init_client(struct i2c_client *client); +static const struct i2c_device_id adm1026_id[] = { + { "adm1026", adm1026 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1026_id); + static struct i2c_driver adm1026_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adm1026", }, - .attach_adapter = adm1026_attach_adapter, - .detach_client = adm1026_detach_client, + .probe = adm1026_probe, + .remove = adm1026_remove, + .id_table = adm1026_id, + .detect = adm1026_detect, + .address_data = &addr_data, }; -static int adm1026_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) { - return 0; - } - return i2c_probe(adapter, &addr_data, adm1026_detect); -} - static int adm1026_read_value(struct i2c_client *client, u8 reg) { int res; @@ -1647,48 +1649,32 @@ static const struct attribute_group adm1026_group_in8_9 = { .attrs = adm1026_attributes_in8_9, }; -static int adm1026_detect(struct i2c_adapter *adapter, int address, - int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm1026_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { + struct i2c_adapter *adapter = client->adapter; + int address = client->addr; int company, verstep; - struct i2c_client *client; - struct adm1026_data *data; - int err = 0; - const char *type_name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { /* We need to be able to do byte I/O */ - goto exit; + return -ENODEV; }; - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access adm1026_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct adm1026_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &adm1026_driver; - /* Now, we do the remaining detection. */ company = adm1026_read_value(client, ADM1026_REG_COMPANY); verstep = adm1026_read_value(client, ADM1026_REG_VERSTEP); - dev_dbg(&client->dev, "Detecting device at %d,0x%02x with" + dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with" " COMPANY: 0x%02x and VERSTEP: 0x%02x\n", i2c_adapter_id(client->adapter), client->addr, company, verstep); /* If auto-detecting, Determine the chip type. */ if (kind <= 0) { - dev_dbg(&client->dev, "Autodetecting device at %d,0x%02x " + dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x " "...\n", i2c_adapter_id(adapter), address); if (company == ADM1026_COMPANY_ANALOG_DEV && verstep == ADM1026_VERSTEP_ADM1026) { @@ -1704,7 +1690,7 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address, verstep); kind = any_chip; } else { - dev_dbg(&client->dev, ": Autodetection " + dev_dbg(&adapter->dev, ": Autodetection " "failed\n"); /* Not an ADM1026 ... */ if (kind == 0) { /* User used force=x,y */ @@ -1713,33 +1699,29 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address, "force_adm1026.\n", i2c_adapter_id(adapter), address); } - goto exitfree; + return -ENODEV; } } + strlcpy(info->type, "adm1026", I2C_NAME_SIZE); - /* Fill in the chip specific driver values */ - switch (kind) { - case any_chip : - type_name = "adm1026"; - break; - case adm1026 : - type_name = "adm1026"; - break; - default : - dev_err(&adapter->dev, ": Internal error, invalid " - "kind (%d)!\n", kind); - err = -EFAULT; - goto exitfree; + return 0; +} + +static int adm1026_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adm1026_data *data; + int err; + + data = kzalloc(sizeof(struct adm1026_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; } - strlcpy(client->name, type_name, I2C_NAME_SIZE); - /* Fill in the remaining client fields */ + i2c_set_clientdata(client, data); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exitfree; - /* Set the VRM version */ data->vrm = vid_which_vrm(); @@ -1748,7 +1730,7 @@ static int adm1026_detect(struct i2c_adapter *adapter, int address, /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &adm1026_group))) - goto exitdetach; + goto exitfree; if (data->config1 & CFG1_AIN8_9) err = sysfs_create_group(&client->dev.kobj, &adm1026_group_in8_9); @@ -1773,15 +1755,13 @@ exitremove: sysfs_remove_group(&client->dev.kobj, &adm1026_group_in8_9); else sysfs_remove_group(&client->dev.kobj, &adm1026_group_temp3); -exitdetach: - i2c_detach_client(client); exitfree: kfree(data); exit: return err; } -static int adm1026_detach_client(struct i2c_client *client) +static int adm1026_remove(struct i2c_client *client) { struct adm1026_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); @@ -1790,7 +1770,6 @@ static int adm1026_detach_client(struct i2c_client *client) sysfs_remove_group(&client->dev.kobj, &adm1026_group_in8_9); else sysfs_remove_group(&client->dev.kobj, &adm1026_group_temp3); - i2c_detach_client(client); kfree(data); return 0; } -- cgit v1.2.3 From 9c97fb4d255fbf6713ee2d77dd8ed8ae770a7e49 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:09 +0200 Subject: hwmon: (adm1029) Convert to a new-style i2c driver The new-style adm1029 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Corentin Labbe --- drivers/hwmon/adm1029.c | 97 ++++++++++++++++++++++--------------------------- 1 file changed, 44 insertions(+), 53 deletions(-) diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c index 2c6608d453c2..ba84ca5923f9 100644 --- a/drivers/hwmon/adm1029.c +++ b/drivers/hwmon/adm1029.c @@ -115,9 +115,11 @@ static const u8 ADM1029_REG_FAN_DIV[] = { * Functions declaration */ -static int adm1029_attach_adapter(struct i2c_adapter *adapter); -static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind); -static int adm1029_detach_client(struct i2c_client *client); +static int adm1029_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adm1029_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adm1029_remove(struct i2c_client *client); static struct adm1029_data *adm1029_update_device(struct device *dev); static int adm1029_init_client(struct i2c_client *client); @@ -125,12 +127,22 @@ static int adm1029_init_client(struct i2c_client *client); * Driver data (common to all clients) */ +static const struct i2c_device_id adm1029_id[] = { + { "adm1029", adm1029 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1029_id); + static struct i2c_driver adm1029_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adm1029", }, - .attach_adapter = adm1029_attach_adapter, - .detach_client = adm1029_detach_client, + .probe = adm1029_probe, + .remove = adm1029_remove, + .id_table = adm1029_id, + .detect = adm1029_detect, + .address_data = &addr_data, }; /* @@ -138,7 +150,6 @@ static struct i2c_driver adm1029_driver = { */ struct adm1029_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -284,37 +295,14 @@ static const struct attribute_group adm1029_group = { * Real code */ -static int adm1029_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm1029_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adm1029_detect); -} + struct i2c_adapter *adapter = client->adapter; -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ - -static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client; - struct adm1029_data *data; - int err = 0; - const char *name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &adm1029_driver; + return -ENODEV; /* Now we do the detection and identification. A negative kind * means that the driver was loaded with no force parameter @@ -362,32 +350,41 @@ static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind) if (kind <= 0) { /* identification failed */ pr_debug("adm1029: Unsupported chip (man_id=0x%02X, " "chip_id=0x%02X)\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } + strlcpy(info->type, "adm1029", I2C_NAME_SIZE); - if (kind == adm1029) { - name = "adm1029"; + return 0; +} + +static int adm1029_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adm1029_data *data; + int err; + + data = kzalloc(sizeof(struct adm1029_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; } - /* We can fill in the remaining client fields */ - strlcpy(client->name, name, I2C_NAME_SIZE); + i2c_set_clientdata(client, data); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; - /* * Initialize the ADM1029 chip * Check config register */ - if (adm1029_init_client(client) == 0) - goto exit_detach; + if (adm1029_init_client(client) == 0) { + err = -ENODEV; + goto exit_free; + } /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &adm1029_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -399,8 +396,6 @@ static int adm1029_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&client->dev.kobj, &adm1029_group); - exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: @@ -424,17 +419,13 @@ static int adm1029_init_client(struct i2c_client *client) return 1; } -static int adm1029_detach_client(struct i2c_client *client) +static int adm1029_remove(struct i2c_client *client) { struct adm1029_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &adm1029_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } -- cgit v1.2.3 From af200f881d2cbf3ba2f4c505fa1ae5cfef36f46a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:09 +0200 Subject: hwmon: (adm1031) Convert to a new-style i2c driver The new-style adm1031 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Alexandre d'Alton --- drivers/hwmon/adm1031.c | 96 +++++++++++++++++++++++++------------------------ 1 file changed, 49 insertions(+), 47 deletions(-) diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index 2bffcab7dc9f..789441830cd8 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -70,7 +70,6 @@ typedef u8 auto_chan_table_t[8][2]; /* Each client has this additional data */ struct adm1031_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; int chip_type; @@ -99,19 +98,32 @@ struct adm1031_data { s8 temp_crit[3]; }; -static int adm1031_attach_adapter(struct i2c_adapter *adapter); -static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind); +static int adm1031_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adm1031_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void adm1031_init_client(struct i2c_client *client); -static int adm1031_detach_client(struct i2c_client *client); +static int adm1031_remove(struct i2c_client *client); static struct adm1031_data *adm1031_update_device(struct device *dev); +static const struct i2c_device_id adm1031_id[] = { + { "adm1030", adm1030 }, + { "adm1031", adm1031 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm1031_id); + /* This is the driver that will be inserted */ static struct i2c_driver adm1031_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adm1031", }, - .attach_adapter = adm1031_attach_adapter, - .detach_client = adm1031_detach_client, + .probe = adm1031_probe, + .remove = adm1031_remove, + .id_table = adm1031_id, + .detect = adm1031_detect, + .address_data = &addr_data, }; static inline u8 adm1031_read_value(struct i2c_client *client, u8 reg) @@ -693,13 +705,6 @@ static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 12); static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13); static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14); -static int adm1031_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adm1031_detect); -} - static struct attribute *adm1031_attributes[] = { &sensor_dev_attr_fan1_input.dev_attr.attr, &sensor_dev_attr_fan1_div.dev_attr.attr, @@ -770,27 +775,15 @@ static const struct attribute_group adm1031_group_opt = { .attrs = adm1031_attributes_opt, }; -/* This function is called by i2c_probe */ -static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm1031_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct adm1031_data *data; - int err = 0; + struct i2c_adapter *adapter = client->adapter; const char *name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &adm1031_driver; + return -ENODEV; if (kind < 0) { int id, co; @@ -798,7 +791,7 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) co = i2c_smbus_read_byte_data(client, 0x3e); if (!((id == 0x31 || id == 0x30) && co == 0x41)) - goto exit_free; + return -ENODEV; kind = (id == 0x30) ? adm1030 : adm1031; } @@ -809,28 +802,43 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) * auto fan control helper table. */ if (kind == adm1030) { name = "adm1030"; - data->chan_select_table = &auto_channel_select_table_adm1030; } else if (kind == adm1031) { name = "adm1031"; - data->chan_select_table = &auto_channel_select_table_adm1031; } - data->chip_type = kind; + strlcpy(info->type, name, I2C_NAME_SIZE); - strlcpy(client->name, name, I2C_NAME_SIZE); + return 0; +} + +static int adm1031_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adm1031_data *data; + int err; + + data = kzalloc(sizeof(struct adm1031_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->chip_type = id->driver_data; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; + if (data->chip_type == adm1030) + data->chan_select_table = &auto_channel_select_table_adm1030; + else + data->chan_select_table = &auto_channel_select_table_adm1031; /* Initialize the ADM1031 chip */ adm1031_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &adm1031_group))) - goto exit_detach; + goto exit_free; - if (kind == adm1031) { + if (data->chip_type == adm1031) { if ((err = sysfs_create_group(&client->dev.kobj, &adm1031_group_opt))) goto exit_remove; @@ -847,25 +855,19 @@ static int adm1031_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &adm1031_group); sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int adm1031_detach_client(struct i2c_client *client) +static int adm1031_remove(struct i2c_client *client) { struct adm1031_data *data = i2c_get_clientdata(client); - int ret; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &adm1031_group); sysfs_remove_group(&client->dev.kobj, &adm1031_group_opt); - if ((ret = i2c_detach_client(client)) != 0) { - return ret; - } kfree(data); return 0; } -- cgit v1.2.3 From 7fae8283109e155467bc1c622178d3a475cdbddf Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:09 +0200 Subject: hwmon: (adm9240) Convert to a new-style i2c driver The new-style adm9240 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Grant Coady --- drivers/hwmon/adm9240.c | 93 ++++++++++++++++++++++++------------------------- 1 file changed, 46 insertions(+), 47 deletions(-) diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c index 149ef25252e7..2444b15f2e9d 100644 --- a/drivers/hwmon/adm9240.c +++ b/drivers/hwmon/adm9240.c @@ -130,25 +130,37 @@ static inline unsigned int AOUT_FROM_REG(u8 reg) return SCALE(reg, 1250, 255); } -static int adm9240_attach_adapter(struct i2c_adapter *adapter); -static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind); +static int adm9240_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adm9240_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void adm9240_init_client(struct i2c_client *client); -static int adm9240_detach_client(struct i2c_client *client); +static int adm9240_remove(struct i2c_client *client); static struct adm9240_data *adm9240_update_device(struct device *dev); /* driver data */ +static const struct i2c_device_id adm9240_id[] = { + { "adm9240", adm9240 }, + { "ds1780", ds1780 }, + { "lm81", lm81 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adm9240_id); + static struct i2c_driver adm9240_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adm9240", }, - .attach_adapter = adm9240_attach_adapter, - .detach_client = adm9240_detach_client, + .probe = adm9240_probe, + .remove = adm9240_remove, + .id_table = adm9240_id, + .detect = adm9240_detect, + .address_data = &addr_data, }; /* per client data */ struct adm9240_data { - enum chips type; - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; @@ -532,28 +544,17 @@ static const struct attribute_group adm9240_group = { /*** sensor chip detect and driver install ***/ -static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adm9240_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct adm9240_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; const char *name = ""; + int address = new_client->addr; u8 man_id, die_rev; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(*data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &adm9240_driver; - new_client->flags = 0; + return -ENODEV; if (kind == 0) { kind = adm9240; @@ -566,7 +567,7 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) != address) { dev_err(&adapter->dev, "detect fail: address match, " "0x%02x\n", address); - goto exit_free; + return -ENODEV; } /* check known chip manufacturer */ @@ -581,7 +582,7 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) } else { dev_err(&adapter->dev, "detect fail: unknown manuf, " "0x%02x\n", man_id); - goto exit_free; + return -ENODEV; } /* successful detect, print chip info */ @@ -600,20 +601,31 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) } else if (kind == lm81) { name = "lm81"; } + strlcpy(info->type, name, I2C_NAME_SIZE); - /* fill in the remaining client fields and attach */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->type = kind; - mutex_init(&data->update_lock); + return 0; +} - if ((err = i2c_attach_client(new_client))) - goto exit_free; +static int adm9240_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct adm9240_data *data; + int err; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); + mutex_init(&data->update_lock); adm9240_init_client(new_client); /* populate sysfs filesystem */ if ((err = sysfs_create_group(&new_client->dev.kobj, &adm9240_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -625,32 +637,19 @@ static int adm9240_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&new_client->dev.kobj, &adm9240_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } -static int adm9240_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adm9240_detect); -} - -static int adm9240_detach_client(struct i2c_client *client) +static int adm9240_remove(struct i2c_client *client) { struct adm9240_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &adm9240_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } -- cgit v1.2.3 From 7347cb388e5aecffc4920bd5ea6a61e4a4690bae Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:10 +0200 Subject: hwmon: (ads7828) Convert to a new-style i2c driver The new-style ads7828 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/ads7828.c | 89 +++++++++++++++++++++---------------------------- 1 file changed, 38 insertions(+), 51 deletions(-) diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c index 5c8b6e0ff47c..5c39b4af1b23 100644 --- a/drivers/hwmon/ads7828.c +++ b/drivers/hwmon/ads7828.c @@ -64,7 +64,6 @@ static unsigned int ads7828_lsb_resol; /* resolution of the ADC sample lsb */ /* Each client has this additional data */ struct ads7828_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; /* mutex protect updates */ char valid; /* !=0 if following fields are valid */ @@ -73,7 +72,10 @@ struct ads7828_data { }; /* Function declaration - necessary due to function dependencies */ -static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind); +static int ads7828_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int ads7828_probe(struct i2c_client *client, + const struct i2c_device_id *id); /* The ADS7828 returns the 12-bit sample in two bytes, these are read as a word then byte-swapped */ @@ -156,58 +158,43 @@ static const struct attribute_group ads7828_group = { .attrs = ads7828_attributes, }; -static int ads7828_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, ads7828_detect); -} - -static int ads7828_detach_client(struct i2c_client *client) +static int ads7828_remove(struct i2c_client *client) { struct ads7828_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &ads7828_group); - i2c_detach_client(client); kfree(i2c_get_clientdata(client)); return 0; } +static const struct i2c_device_id ads7828_id[] = { + { "ads7828", ads7828 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ads7828_id); + /* This is the driver that will be inserted */ static struct i2c_driver ads7828_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "ads7828", }, - .attach_adapter = ads7828_attach_adapter, - .detach_client = ads7828_detach_client, + .probe = ads7828_probe, + .remove = ads7828_remove, + .id_table = ads7828_id, + .detect = ads7828_detect, + .address_data = &addr_data, }; -/* This function is called by i2c_probe */ -static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int ads7828_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct ads7828_data *data; - int err = 0; - const char *name = ""; + struct i2c_adapter *adapter = client->adapter; /* Check we have a valid client */ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access ads7828_read_value. */ - data = kzalloc(sizeof(struct ads7828_data), GFP_KERNEL); - if (!data) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &ads7828_driver; + return -ENODEV; /* Now, we do the remaining detection. There is no identification dedicated register so attempt to sanity check using knowledge of @@ -225,32 +212,34 @@ static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind) printk(KERN_DEBUG "%s : Doesn't look like an ads7828 device\n", __func__); - goto exit_free; + return -ENODEV; } } } + strlcpy(info->type, "ads7828", I2C_NAME_SIZE); - /* Determine the chip type - only one kind supported! */ - if (kind <= 0) - kind = ads7828; + return 0; +} - if (kind == ads7828) - name = "ads7828"; +static int ads7828_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ads7828_data *data; + int err; - /* Fill in the remaining client fields, put it into the global list */ - strlcpy(client->name, name, I2C_NAME_SIZE); + data = kzalloc(sizeof(struct ads7828_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + i2c_set_clientdata(client, data); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - err = i2c_attach_client(client); - if (err) - goto exit_free; - /* Register sysfs hooks */ err = sysfs_create_group(&client->dev.kobj, &ads7828_group); if (err) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -262,8 +251,6 @@ static int ads7828_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &ads7828_group); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: -- cgit v1.2.3 From 008f1ca51e4a25ee3e34b8faa901dbeefaf0081a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:10 +0200 Subject: hwmon: (adt7470) Convert to a new-style i2c driver The new-style adt7470 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Darrick J. Wong --- drivers/hwmon/adt7470.c | 100 +++++++++++++++++++++++------------------------- 1 file changed, 48 insertions(+), 52 deletions(-) diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c index 6b5325f33a2c..d368d8f845e1 100644 --- a/drivers/hwmon/adt7470.c +++ b/drivers/hwmon/adt7470.c @@ -138,7 +138,6 @@ I2C_CLIENT_INSMOD_1(adt7470); #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) struct adt7470_data { - struct i2c_client client; struct device *hwmon_dev; struct attribute_group attrs; struct mutex lock; @@ -164,16 +163,28 @@ struct adt7470_data { u8 pwm_auto_temp[ADT7470_PWM_COUNT]; }; -static int adt7470_attach_adapter(struct i2c_adapter *adapter); -static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind); -static int adt7470_detach_client(struct i2c_client *client); +static int adt7470_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adt7470_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adt7470_remove(struct i2c_client *client); + +static const struct i2c_device_id adt7470_id[] = { + { "adt7470", adt7470 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adt7470_id); static struct i2c_driver adt7470_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adt7470", }, - .attach_adapter = adt7470_attach_adapter, - .detach_client = adt7470_detach_client, + .probe = adt7470_probe, + .remove = adt7470_remove, + .id_table = adt7470_id, + .detect = adt7470_detect, + .address_data = &addr_data, }; /* @@ -1004,64 +1015,52 @@ static struct attribute *adt7470_attr[] = NULL }; -static int adt7470_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adt7470_detect); -} - -static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adt7470_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct adt7470_data *data; - int err = 0; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct adt7470_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - client->addr = address; - client->adapter = adapter; - client->driver = &adt7470_driver; - - i2c_set_clientdata(client, data); - - mutex_init(&data->lock); + return -ENODEV; if (kind <= 0) { int vendor, device, revision; vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR); - if (vendor != ADT7470_VENDOR) { - err = -ENODEV; - goto exit_free; - } + if (vendor != ADT7470_VENDOR) + return -ENODEV; device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE); - if (device != ADT7470_DEVICE) { - err = -ENODEV; - goto exit_free; - } + if (device != ADT7470_DEVICE) + return -ENODEV; revision = i2c_smbus_read_byte_data(client, ADT7470_REG_REVISION); - if (revision != ADT7470_REVISION) { - err = -ENODEV; - goto exit_free; - } + if (revision != ADT7470_REVISION) + return -ENODEV; } else dev_dbg(&adapter->dev, "detection forced\n"); - strlcpy(client->name, "adt7470", I2C_NAME_SIZE); + strlcpy(info->type, "adt7470", I2C_NAME_SIZE); - if ((err = i2c_attach_client(client))) - goto exit_free; + return 0; +} + +static int adt7470_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adt7470_data *data; + int err; + + data = kzalloc(sizeof(struct adt7470_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); dev_info(&client->dev, "%s chip found\n", client->name); @@ -1071,7 +1070,7 @@ static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind) /* Register sysfs hooks */ data->attrs.attrs = adt7470_attr; if ((err = sysfs_create_group(&client->dev.kobj, &data->attrs))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -1083,21 +1082,18 @@ static int adt7470_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &data->attrs); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int adt7470_detach_client(struct i2c_client *client) +static int adt7470_remove(struct i2c_client *client) { struct adt7470_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &data->attrs); - i2c_detach_client(client); kfree(data); return 0; } -- cgit v1.2.3 From eea54766c6e3f9850affa91061164aeb6bba44b6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:10 +0200 Subject: hwmon: (adt7473) Convert to a new-style i2c driver The new-style adt7473 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Darrick J. Wong --- drivers/hwmon/adt7473.c | 102 +++++++++++++++++++++++------------------------- 1 file changed, 48 insertions(+), 54 deletions(-) diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index 93dbf5e7ff8a..ce4a7cb5a116 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -143,7 +143,6 @@ I2C_CLIENT_INSMOD_1(adt7473); #define FAN_DATA_VALID(x) ((x) && (x) != FAN_PERIOD_INVALID) struct adt7473_data { - struct i2c_client client; struct device *hwmon_dev; struct attribute_group attrs; struct mutex lock; @@ -178,16 +177,28 @@ struct adt7473_data { u8 max_duty_at_overheat; }; -static int adt7473_attach_adapter(struct i2c_adapter *adapter); -static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind); -static int adt7473_detach_client(struct i2c_client *client); +static int adt7473_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int adt7473_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int adt7473_remove(struct i2c_client *client); + +static const struct i2c_device_id adt7473_id[] = { + { "adt7473", adt7473 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adt7473_id); static struct i2c_driver adt7473_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "adt7473", }, - .attach_adapter = adt7473_attach_adapter, - .detach_client = adt7473_detach_client, + .probe = adt7473_probe, + .remove = adt7473_remove, + .id_table = adt7473_id, + .detect = adt7473_detect, + .address_data = &addr_data, }; /* @@ -1042,66 +1053,52 @@ static struct attribute *adt7473_attr[] = NULL }; -static int adt7473_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int adt7473_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, adt7473_detect); -} - -static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client; - struct adt7473_data *data; - int err = 0; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL); - if (!data) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - client->addr = address; - client->adapter = adapter; - client->driver = &adt7473_driver; - - i2c_set_clientdata(client, data); - - mutex_init(&data->lock); + return -ENODEV; if (kind <= 0) { int vendor, device, revision; vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR); - if (vendor != ADT7473_VENDOR) { - err = -ENODEV; - goto exit_free; - } + if (vendor != ADT7473_VENDOR) + return -ENODEV; device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE); - if (device != ADT7473_DEVICE) { - err = -ENODEV; - goto exit_free; - } + if (device != ADT7473_DEVICE) + return -ENODEV; revision = i2c_smbus_read_byte_data(client, ADT7473_REG_REVISION); - if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) { - err = -ENODEV; - goto exit_free; - } + if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) + return -ENODEV; } else dev_dbg(&adapter->dev, "detection forced\n"); - strlcpy(client->name, "adt7473", I2C_NAME_SIZE); + strlcpy(info->type, "adt7473", I2C_NAME_SIZE); - err = i2c_attach_client(client); - if (err) - goto exit_free; + return 0; +} + +static int adt7473_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct adt7473_data *data; + int err; + + data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); dev_info(&client->dev, "%s chip found\n", client->name); @@ -1112,7 +1109,7 @@ static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind) data->attrs.attrs = adt7473_attr; err = sysfs_create_group(&client->dev.kobj, &data->attrs); if (err) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -1124,21 +1121,18 @@ static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &data->attrs); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int adt7473_detach_client(struct i2c_client *client) +static int adt7473_remove(struct i2c_client *client) { struct adt7473_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &data->attrs); - i2c_detach_client(client); kfree(data); return 0; } -- cgit v1.2.3 From 063675b15608dfbb8404b3a19546d579bd039d02 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:11 +0200 Subject: hwmon: (asb100) Convert to a new-style i2c driver The new-style asb100 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/asb100.c | 207 ++++++++++++++++++++----------------------------- 1 file changed, 83 insertions(+), 124 deletions(-) diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index fe2eea4d799b..8a45a2e6ba8a 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -176,10 +176,8 @@ static u8 DIV_TO_REG(long val) data is pointed to by client->data. The structure itself is dynamically allocated, at the same time the client itself is allocated. */ struct asb100_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex lock; - enum chips type; struct mutex update_lock; unsigned long last_updated; /* In jiffies */ @@ -206,18 +204,30 @@ struct asb100_data { static int asb100_read_value(struct i2c_client *client, u16 reg); static void asb100_write_value(struct i2c_client *client, u16 reg, u16 val); -static int asb100_attach_adapter(struct i2c_adapter *adapter); -static int asb100_detect(struct i2c_adapter *adapter, int address, int kind); -static int asb100_detach_client(struct i2c_client *client); +static int asb100_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int asb100_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int asb100_remove(struct i2c_client *client); static struct asb100_data *asb100_update_device(struct device *dev); static void asb100_init_client(struct i2c_client *client); +static const struct i2c_device_id asb100_id[] = { + { "asb100", asb100 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, asb100_id); + static struct i2c_driver asb100_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "asb100", }, - .attach_adapter = asb100_attach_adapter, - .detach_client = asb100_detach_client, + .probe = asb100_probe, + .remove = asb100_remove, + .id_table = asb100_id, + .detect = asb100_detect, + .address_data = &addr_data, }; /* 7 Voltages */ @@ -619,35 +629,13 @@ static const struct attribute_group asb100_group = { .attrs = asb100_attributes, }; -/* This function is called when: - asb100_driver is inserted (when this module is loaded), for each - available adapter - when a new adapter is inserted (and asb100_driver is still present) - */ -static int asb100_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, asb100_detect); -} - -static int asb100_detect_subclients(struct i2c_adapter *adapter, int address, - int kind, struct i2c_client *client) +static int asb100_detect_subclients(struct i2c_client *client) { int i, id, err; + int address = client->addr; + unsigned short sc_addr[2]; struct asb100_data *data = i2c_get_clientdata(client); - - data->lm75[0] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(data->lm75[0])) { - err = -ENOMEM; - goto ERROR_SC_0; - } - - data->lm75[1] = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(data->lm75[1])) { - err = -ENOMEM; - goto ERROR_SC_1; - } + struct i2c_adapter *adapter = client->adapter; id = i2c_adapter_id(adapter); @@ -665,37 +653,34 @@ static int asb100_detect_subclients(struct i2c_adapter *adapter, int address, asb100_write_value(client, ASB100_REG_I2C_SUBADDR, (force_subclients[2] & 0x07) | ((force_subclients[3] & 0x07) << 4)); - data->lm75[0]->addr = force_subclients[2]; - data->lm75[1]->addr = force_subclients[3]; + sc_addr[0] = force_subclients[2]; + sc_addr[1] = force_subclients[3]; } else { int val = asb100_read_value(client, ASB100_REG_I2C_SUBADDR); - data->lm75[0]->addr = 0x48 + (val & 0x07); - data->lm75[1]->addr = 0x48 + ((val >> 4) & 0x07); + sc_addr[0] = 0x48 + (val & 0x07); + sc_addr[1] = 0x48 + ((val >> 4) & 0x07); } - if (data->lm75[0]->addr == data->lm75[1]->addr) { + if (sc_addr[0] == sc_addr[1]) { dev_err(&client->dev, "duplicate addresses 0x%x " - "for subclients\n", data->lm75[0]->addr); + "for subclients\n", sc_addr[0]); err = -ENODEV; goto ERROR_SC_2; } - for (i = 0; i <= 1; i++) { - i2c_set_clientdata(data->lm75[i], NULL); - data->lm75[i]->adapter = adapter; - data->lm75[i]->driver = &asb100_driver; - strlcpy(data->lm75[i]->name, "asb100 subclient", I2C_NAME_SIZE); - } - - if ((err = i2c_attach_client(data->lm75[0]))) { + data->lm75[0] = i2c_new_dummy(adapter, sc_addr[0]); + if (!data->lm75[0]) { dev_err(&client->dev, "subclient %d registration " - "at address 0x%x failed.\n", i, data->lm75[0]->addr); + "at address 0x%x failed.\n", 1, sc_addr[0]); + err = -ENOMEM; goto ERROR_SC_2; } - if ((err = i2c_attach_client(data->lm75[1]))) { + data->lm75[1] = i2c_new_dummy(adapter, sc_addr[1]); + if (!data->lm75[1]) { dev_err(&client->dev, "subclient %d registration " - "at address 0x%x failed.\n", i, data->lm75[1]->addr); + "at address 0x%x failed.\n", 2, sc_addr[1]); + err = -ENOMEM; goto ERROR_SC_3; } @@ -703,55 +688,31 @@ static int asb100_detect_subclients(struct i2c_adapter *adapter, int address, /* Undo inits in case of errors */ ERROR_SC_3: - i2c_detach_client(data->lm75[0]); + i2c_unregister_device(data->lm75[0]); ERROR_SC_2: - kfree(data->lm75[1]); -ERROR_SC_1: - kfree(data->lm75[0]); -ERROR_SC_0: return err; } -static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int asb100_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - int err; - struct i2c_client *client; - struct asb100_data *data; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { pr_debug("asb100.o: detect failed, " "smbus byte data not supported!\n"); - err = -ENODEV; - goto ERROR0; + return -ENODEV; } - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access asb100_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL))) { - pr_debug("asb100.o: detect failed, kzalloc failed!\n"); - err = -ENOMEM; - goto ERROR0; - } - - client = &data->client; - mutex_init(&data->lock); - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &asb100_driver; - - /* Now, we do the remaining detection. */ - /* The chip may be stuck in some other bank than bank 0. This may make reading other information impossible. Specify a force=... or force_*=... parameter, and the chip will be reset to the right bank. */ if (kind < 0) { - int val1 = asb100_read_value(client, ASB100_REG_BANK); - int val2 = asb100_read_value(client, ASB100_REG_CHIPMAN); + int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK); + int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN); /* If we're in bank 0 */ if ((!(val1 & 0x07)) && @@ -761,48 +722,60 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) ((val1 & 0x80) && (val2 != 0x06)))) { pr_debug("asb100.o: detect failed, " "bad chip id 0x%02x!\n", val2); - err = -ENODEV; - goto ERROR1; + return -ENODEV; } } /* kind < 0 */ /* We have either had a force parameter, or we have already detected Winbond. Put it now into bank 0 and Vendor ID High Byte */ - asb100_write_value(client, ASB100_REG_BANK, - (asb100_read_value(client, ASB100_REG_BANK) & 0x78) | 0x80); + i2c_smbus_write_byte_data(client, ASB100_REG_BANK, + (i2c_smbus_read_byte_data(client, ASB100_REG_BANK) & 0x78) + | 0x80); /* Determine the chip type. */ if (kind <= 0) { - int val1 = asb100_read_value(client, ASB100_REG_WCHIPID); - int val2 = asb100_read_value(client, ASB100_REG_CHIPMAN); + int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID); + int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN); if ((val1 == 0x31) && (val2 == 0x06)) kind = asb100; else { if (kind == 0) - dev_warn(&client->dev, "ignoring " + dev_warn(&adapter->dev, "ignoring " "'force' parameter for unknown chip " "at adapter %d, address 0x%02x.\n", - i2c_adapter_id(adapter), address); - err = -ENODEV; - goto ERROR1; + i2c_adapter_id(adapter), client->addr); + return -ENODEV; } } - /* Fill in remaining client fields and put it into the global list */ - strlcpy(client->name, "asb100", I2C_NAME_SIZE); - data->type = kind; - mutex_init(&data->update_lock); + strlcpy(info->type, "asb100", I2C_NAME_SIZE); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto ERROR1; + return 0; +} + +static int asb100_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int err; + struct asb100_data *data; + + data = kzalloc(sizeof(struct asb100_data), GFP_KERNEL); + if (!data) { + pr_debug("asb100.o: probe failed, kzalloc failed!\n"); + err = -ENOMEM; + goto ERROR0; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + mutex_init(&data->update_lock); /* Attach secondary lm75 clients */ - if ((err = asb100_detect_subclients(adapter, address, kind, - client))) - goto ERROR2; + err = asb100_detect_subclients(client); + if (err) + goto ERROR1; /* Initialize the chip */ asb100_init_client(client); @@ -827,39 +800,25 @@ static int asb100_detect(struct i2c_adapter *adapter, int address, int kind) ERROR4: sysfs_remove_group(&client->dev.kobj, &asb100_group); ERROR3: - i2c_detach_client(data->lm75[1]); - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[1]); - kfree(data->lm75[0]); -ERROR2: - i2c_detach_client(client); + i2c_unregister_device(data->lm75[1]); + i2c_unregister_device(data->lm75[0]); ERROR1: kfree(data); ERROR0: return err; } -static int asb100_detach_client(struct i2c_client *client) +static int asb100_remove(struct i2c_client *client) { struct asb100_data *data = i2c_get_clientdata(client); - int err; - - /* main client */ - if (data) { - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &asb100_group); - } - if ((err = i2c_detach_client(client))) - return err; + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &asb100_group); - /* main client */ - if (data) - kfree(data); + i2c_unregister_device(data->lm75[1]); + i2c_unregister_device(data->lm75[0]); - /* subclient */ - else - kfree(client); + kfree(data); return 0; } -- cgit v1.2.3 From 71163c7c36fa76bb5a72feca7fb685677444070a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:11 +0200 Subject: hwmon: (atxp1) Convert to a new-style i2c driver The new-style atxp1 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/atxp1.c | 109 ++++++++++++++++++++++++-------------------------- 1 file changed, 52 insertions(+), 57 deletions(-) diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index 01c17e387f03..d191118ba0cb 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -46,21 +46,32 @@ static const unsigned short normal_i2c[] = { 0x37, 0x4e, I2C_CLIENT_END }; I2C_CLIENT_INSMOD_1(atxp1); -static int atxp1_attach_adapter(struct i2c_adapter * adapter); -static int atxp1_detach_client(struct i2c_client * client); +static int atxp1_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int atxp1_remove(struct i2c_client *client); static struct atxp1_data * atxp1_update_device(struct device *dev); -static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind); +static int atxp1_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); + +static const struct i2c_device_id atxp1_id[] = { + { "atxp1", atxp1 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, atxp1_id); static struct i2c_driver atxp1_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "atxp1", }, - .attach_adapter = atxp1_attach_adapter, - .detach_client = atxp1_detach_client, + .probe = atxp1_probe, + .remove = atxp1_remove, + .id_table = atxp1_id, + .detect = atxp1_detect, + .address_data = &addr_data, }; struct atxp1_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; unsigned long last_updated; @@ -263,35 +274,16 @@ static const struct attribute_group atxp1_group = { }; -static int atxp1_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int atxp1_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, &atxp1_detect); -}; + struct i2c_adapter *adapter = new_client->adapter; -static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client * new_client; - struct atxp1_data * data; - int err = 0; u8 temp; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct atxp1_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &atxp1_driver; - new_client->flags = 0; + return -ENODEV; /* Detect ATXP1, checking if vendor ID registers are all zero */ if (!((i2c_smbus_read_byte_data(new_client, 0x3e) == 0) && @@ -305,35 +297,46 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) if (!((i2c_smbus_read_byte_data(new_client, 0x10) == temp) && (i2c_smbus_read_byte_data(new_client, 0x11) == temp) )) - goto exit_free; + return -ENODEV; } /* Get VRM */ - data->vrm = vid_which_vrm(); + temp = vid_which_vrm(); - if ((data->vrm != 90) && (data->vrm != 91)) { - dev_err(&new_client->dev, "Not supporting VRM %d.%d\n", - data->vrm / 10, data->vrm % 10); - goto exit_free; + if ((temp != 90) && (temp != 91)) { + dev_err(&adapter->dev, "atxp1: Not supporting VRM %d.%d\n", + temp / 10, temp % 10); + return -ENODEV; } - strncpy(new_client->name, "atxp1", I2C_NAME_SIZE); - - data->valid = 0; + strlcpy(info->type, "atxp1", I2C_NAME_SIZE); - mutex_init(&data->update_lock); + return 0; +} - err = i2c_attach_client(new_client); +static int atxp1_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct atxp1_data *data; + int err; - if (err) - { - dev_err(&new_client->dev, "Attach client error.\n"); - goto exit_free; + data = kzalloc(sizeof(struct atxp1_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; } + /* Get VRM */ + data->vrm = vid_which_vrm(); + + i2c_set_clientdata(new_client, data); + data->valid = 0; + + mutex_init(&data->update_lock); + /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &atxp1_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -348,30 +351,22 @@ static int atxp1_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &atxp1_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; }; -static int atxp1_detach_client(struct i2c_client * client) +static int atxp1_remove(struct i2c_client *client) { struct atxp1_data * data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &atxp1_group); - err = i2c_detach_client(client); - - if (err) - dev_err(&client->dev, "Failed to detach client.\n"); - else - kfree(data); + kfree(data); - return err; + return 0; }; static int __init atxp1_init(void) -- cgit v1.2.3 From 70313eabfc63ce6aa89b9fa3074129e5c521568a Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:11 +0200 Subject: hwmon: (ds1621) Convert to a new-style i2c driver The new-style ds1621 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/ds1621.c | 99 ++++++++++++++++++++++++-------------------------- 1 file changed, 47 insertions(+), 52 deletions(-) diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index 5f300ffed657..7415381601c3 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -72,7 +72,6 @@ static const u8 DS1621_REG_TEMP[3] = { /* Each client has this additional data */ struct ds1621_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ @@ -82,20 +81,32 @@ struct ds1621_data { u8 conf; /* Register encoding, combined */ }; -static int ds1621_attach_adapter(struct i2c_adapter *adapter); -static int ds1621_detect(struct i2c_adapter *adapter, int address, - int kind); +static int ds1621_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int ds1621_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void ds1621_init_client(struct i2c_client *client); -static int ds1621_detach_client(struct i2c_client *client); +static int ds1621_remove(struct i2c_client *client); static struct ds1621_data *ds1621_update_client(struct device *dev); +static const struct i2c_device_id ds1621_id[] = { + { "ds1621", ds1621 }, + { "ds1625", ds1621 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ds1621_id); + /* This is the driver that will be inserted */ static struct i2c_driver ds1621_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "ds1621", }, - .attach_adapter = ds1621_attach_adapter, - .detach_client = ds1621_detach_client, + .probe = ds1621_probe, + .remove = ds1621_remove, + .id_table = ds1621_id, + .detect = ds1621_detect, + .address_data = &addr_data, }; /* All registers are word-sized, except for the configuration register. @@ -199,40 +210,18 @@ static const struct attribute_group ds1621_group = { }; -static int ds1621_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, ds1621_detect); -} - -/* This function is called by i2c_probe */ -static int ds1621_detect(struct i2c_adapter *adapter, int address, - int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int ds1621_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { + struct i2c_adapter *adapter = client->adapter; int conf, temp; - struct i2c_client *client; - struct ds1621_data *data; - int i, err = 0; + int i; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_WRITE_BYTE)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access ds1621_{read,write}_value. */ - if (!(data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &ds1621_driver; + return -ENODEV; /* Now, we do the remaining detection. It is lousy. */ if (kind < 0) { @@ -241,29 +230,41 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, improbable in our case. */ conf = ds1621_read_value(client, DS1621_REG_CONF); if (conf & DS1621_REG_CONFIG_NVB) - goto exit_free; + return -ENODEV; /* The 7 lowest bits of a temperature should always be 0. */ - for (i = 0; i < ARRAY_SIZE(data->temp); i++) { + for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) { temp = ds1621_read_value(client, DS1621_REG_TEMP[i]); if (temp & 0x007f) - goto exit_free; + return -ENODEV; } } - /* Fill in remaining client fields and put it into the global list */ - strlcpy(client->name, "ds1621", I2C_NAME_SIZE); - mutex_init(&data->update_lock); + strlcpy(info->type, "ds1621", I2C_NAME_SIZE); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; + return 0; +} + +static int ds1621_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ds1621_data *data; + int err; + + data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); /* Initialize the DS1621 chip */ ds1621_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -275,25 +276,19 @@ static int ds1621_detect(struct i2c_adapter *adapter, int address, exit_remove_files: sysfs_remove_group(&client->dev.kobj, &ds1621_group); - exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int ds1621_detach_client(struct i2c_client *client) +static int ds1621_remove(struct i2c_client *client) { struct ds1621_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &ds1621_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; -- cgit v1.2.3 From 935ada8c4481f9591caa1b88c83127c5931a8855 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:11 +0200 Subject: hwmon: (f75375s) Drop legacy i2c driver Drop the legacy f75375s i2c driver, and add a detect callback to the new-style i2c driver to achieve the same functionality. Signed-off-by: Jean Delvare Acked-by: Riku Voipio --- drivers/hwmon/f75375s.c | 89 +++++++------------------------------------------ 1 file changed, 12 insertions(+), 77 deletions(-) diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index dc1f30e432ea..1692de369969 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -87,7 +87,6 @@ I2C_CLIENT_INSMOD_2(f75373, f75375); struct f75375_data { unsigned short addr; - struct i2c_client *client; struct device *hwmon_dev; const char *name; @@ -114,21 +113,12 @@ struct f75375_data { s8 temp_max_hyst[2]; }; -static int f75375_attach_adapter(struct i2c_adapter *adapter); -static int f75375_detect(struct i2c_adapter *adapter, int address, int kind); -static int f75375_detach_client(struct i2c_client *client); +static int f75375_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static int f75375_probe(struct i2c_client *client, const struct i2c_device_id *id); static int f75375_remove(struct i2c_client *client); -static struct i2c_driver f75375_legacy_driver = { - .driver = { - .name = "f75375_legacy", - }, - .attach_adapter = f75375_attach_adapter, - .detach_client = f75375_detach_client, -}; - static const struct i2c_device_id f75375_id[] = { { "f75373", f75373 }, { "f75375", f75375 }, @@ -137,12 +127,15 @@ static const struct i2c_device_id f75375_id[] = { MODULE_DEVICE_TABLE(i2c, f75375_id); static struct i2c_driver f75375_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "f75375", }, .probe = f75375_probe, .remove = f75375_remove, .id_table = f75375_id, + .detect = f75375_detect, + .address_data = &addr_data, }; static inline int f75375_read8(struct i2c_client *client, u8 reg) @@ -607,22 +600,6 @@ static const struct attribute_group f75375_group = { .attrs = f75375_attributes, }; -static int f75375_detach_client(struct i2c_client *client) -{ - int err; - - f75375_remove(client); - err = i2c_detach_client(client); - if (err) { - dev_err(&client->dev, - "Client deregistration failed, " - "client not detached.\n"); - return err; - } - kfree(client); - return 0; -} - static void f75375_init(struct i2c_client *client, struct f75375_data *data, struct f75375s_platform_data *f75375s_pdata) { @@ -651,7 +628,6 @@ static int f75375_probe(struct i2c_client *client, return -ENOMEM; i2c_set_clientdata(client, data); - data->client = client; mutex_init(&data->update_lock); data->kind = id->driver_data; @@ -700,29 +676,13 @@ static int f75375_remove(struct i2c_client *client) return 0; } -static int f75375_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, f75375_detect); -} - -/* This function is called by i2c_probe */ -static int f75375_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int f75375_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; + struct i2c_adapter *adapter = client->adapter; u8 version = 0; - int err = 0; const char *name = ""; - struct i2c_device_id id; - - if (!(client = kzalloc(sizeof(*client), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - client->addr = address; - client->adapter = adapter; - client->driver = &f75375_legacy_driver; if (kind < 0) { u16 vendid = f75375_read16(client, F75375_REG_VENDOR); @@ -736,7 +696,7 @@ static int f75375_detect(struct i2c_adapter *adapter, int address, int kind) dev_err(&adapter->dev, "failed,%02X,%02X,%02X\n", chipid, version, vendid); - goto exit_free; + return -ENODEV; } } @@ -746,43 +706,18 @@ static int f75375_detect(struct i2c_adapter *adapter, int address, int kind) name = "f75373"; } dev_info(&adapter->dev, "found %s version: %02X\n", name, version); - strlcpy(client->name, name, I2C_NAME_SIZE); - - if ((err = i2c_attach_client(client))) - goto exit_free; - - strlcpy(id.name, name, I2C_NAME_SIZE); - id.driver_data = kind; - if ((err = f75375_probe(client, &id)) < 0) - goto exit_detach; + strlcpy(info->type, name, I2C_NAME_SIZE); return 0; - -exit_detach: - i2c_detach_client(client); -exit_free: - kfree(client); -exit: - return err; } static int __init sensors_f75375_init(void) { - int status; - status = i2c_add_driver(&f75375_driver); - if (status) - return status; - - status = i2c_add_driver(&f75375_legacy_driver); - if (status) - i2c_del_driver(&f75375_driver); - - return status; + return i2c_add_driver(&f75375_driver); } static void __exit sensors_f75375_exit(void) { - i2c_del_driver(&f75375_legacy_driver); i2c_del_driver(&f75375_driver); } -- cgit v1.2.3 From c2df1591df3ea83b4a5890a1131dd821ca07e761 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:12 +0200 Subject: hwmon: (fscher) Convert to a new-style i2c driver The new-style fscher driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Reinhard Nissl --- drivers/hwmon/fscher.c | 93 +++++++++++++++++++++++--------------------------- 1 file changed, 42 insertions(+), 51 deletions(-) diff --git a/drivers/hwmon/fscher.c b/drivers/hwmon/fscher.c index ed26b66e0831..12c70e402cb2 100644 --- a/drivers/hwmon/fscher.c +++ b/drivers/hwmon/fscher.c @@ -106,9 +106,11 @@ I2C_CLIENT_INSMOD_1(fscher); * Functions declaration */ -static int fscher_attach_adapter(struct i2c_adapter *adapter); -static int fscher_detect(struct i2c_adapter *adapter, int address, int kind); -static int fscher_detach_client(struct i2c_client *client); +static int fscher_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int fscher_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int fscher_remove(struct i2c_client *client); static struct fscher_data *fscher_update_device(struct device *dev); static void fscher_init_client(struct i2c_client *client); @@ -119,12 +121,21 @@ static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value); * Driver data (common to all clients) */ +static const struct i2c_device_id fscher_id[] = { + { "fscher", fscher }, + { } +}; + static struct i2c_driver fscher_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "fscher", }, - .attach_adapter = fscher_attach_adapter, - .detach_client = fscher_detach_client, + .probe = fscher_probe, + .remove = fscher_remove, + .id_table = fscher_id, + .detect = fscher_detect, + .address_data = &addr_data, }; /* @@ -132,7 +143,6 @@ static struct i2c_driver fscher_driver = { */ struct fscher_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -283,38 +293,14 @@ static const struct attribute_group fscher_group = { * Real code */ -static int fscher_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, fscher_detect); -} - -static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int fscher_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct fscher_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - * client structure, even though we cannot fill it completely yet. - * But it allows us to access i2c_smbus_read_byte_data. */ - if (!(data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right before the - * Hermes-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &fscher_driver; - new_client->flags = 0; + return -ENODEV; /* Do the remaining detection unless force or force_fscher parameter */ if (kind < 0) { @@ -324,24 +310,35 @@ static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) FSCHER_REG_IDENT_1) != 0x45) /* 'E' */ || (i2c_smbus_read_byte_data(new_client, FSCHER_REG_IDENT_2) != 0x52)) /* 'R' */ - goto exit_free; + return -ENODEV; + } + + strlcpy(info->type, "fscher", I2C_NAME_SIZE); + + return 0; +} + +static int fscher_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct fscher_data *data; + int err; + + data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; } - /* Fill in the remaining client fields and put it into the - * global list */ - strlcpy(new_client->name, "fscher", I2C_NAME_SIZE); + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - fscher_init_client(new_client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &fscher_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -353,25 +350,19 @@ static int fscher_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &fscher_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } -static int fscher_detach_client(struct i2c_client *client) +static int fscher_remove(struct i2c_client *client) { struct fscher_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &fscher_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } -- cgit v1.2.3 From 40ac1994bf988dac05434f856c2a4fa24e22b2ea Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:12 +0200 Subject: hwmon: (fschmd) Convert to a new-style i2c driver The new-style fschmd driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Hans de Goede --- drivers/hwmon/fschmd.c | 112 +++++++++++++++++++++++++------------------------ 1 file changed, 57 insertions(+), 55 deletions(-) diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index bd89d270a5ed..967170368933 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -171,20 +171,37 @@ static const int FSCHMD_NO_TEMP_SENSORS[5] = { 3, 3, 4, 3, 5 }; * Functions declarations */ -static int fschmd_attach_adapter(struct i2c_adapter *adapter); -static int fschmd_detach_client(struct i2c_client *client); +static int fschmd_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int fschmd_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int fschmd_remove(struct i2c_client *client); static struct fschmd_data *fschmd_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id fschmd_id[] = { + { "fscpos", fscpos }, + { "fscher", fscher }, + { "fscscy", fscscy }, + { "fschrc", fschrc }, + { "fschmd", fschmd }, + { } +}; +MODULE_DEVICE_TABLE(i2c, fschmd_id); + static struct i2c_driver fschmd_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = FSCHMD_NAME, }, - .attach_adapter = fschmd_attach_adapter, - .detach_client = fschmd_detach_client, + .probe = fschmd_probe, + .remove = fschmd_remove, + .id_table = fschmd_id, + .detect = fschmd_detect, + .address_data = &addr_data, }; /* @@ -192,7 +209,6 @@ static struct i2c_driver fschmd_driver = { */ struct fschmd_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; int kind; @@ -269,7 +285,7 @@ static ssize_t store_temp_max(struct device *dev, struct device_attribute v = SENSORS_LIMIT(v, -128, 127) + 128; mutex_lock(&data->update_lock); - i2c_smbus_write_byte_data(&data->client, + i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_TEMP_LIMIT[data->kind][index], v); data->temp_max[index] = v; mutex_unlock(&data->update_lock); @@ -346,14 +362,14 @@ static ssize_t store_fan_div(struct device *dev, struct device_attribute mutex_lock(&data->update_lock); - reg = i2c_smbus_read_byte_data(&data->client, + reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_FAN_RIPPLE[data->kind][index]); /* bits 2..7 reserved => mask with 0x03 */ reg &= ~0x03; reg |= v; - i2c_smbus_write_byte_data(&data->client, + i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_FAN_RIPPLE[data->kind][index], reg); data->fan_ripple[index] = reg; @@ -416,7 +432,7 @@ static ssize_t store_pwm_auto_point1_pwm(struct device *dev, mutex_lock(&data->update_lock); - i2c_smbus_write_byte_data(&data->client, + i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_FAN_MIN[data->kind][index], v); data->fan_min[index] = v; @@ -448,14 +464,14 @@ static ssize_t store_alert_led(struct device *dev, mutex_lock(&data->update_lock); - reg = i2c_smbus_read_byte_data(&data->client, FSCHMD_REG_CONTROL); + reg = i2c_smbus_read_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL); if (v) reg |= FSCHMD_CONTROL_ALERT_LED_MASK; else reg &= ~FSCHMD_CONTROL_ALERT_LED_MASK; - i2c_smbus_write_byte_data(&data->client, FSCHMD_REG_CONTROL, reg); + i2c_smbus_write_byte_data(to_i2c_client(dev), FSCHMD_REG_CONTROL, reg); data->global_control = reg; @@ -600,32 +616,15 @@ static void fschmd_dmi_decode(const struct dmi_header *header) } } -static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind) +static int fschmd_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct fschmd_data *data; - u8 revision; - const char * const names[5] = { "Poseidon", "Hermes", "Scylla", - "Heracles", "Heimdall" }; + struct i2c_adapter *adapter = client->adapter; const char * const client_names[5] = { "fscpos", "fscher", "fscscy", "fschrc", "fschmd" }; - int i, err = 0; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - return 0; - - /* OK. For now, we presume we have a valid client. We now create the - * client structure, even though we cannot fill it completely yet. - * But it allows us to access i2c_smbus_read_byte_data. */ - if (!(data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL))) - return -ENOMEM; - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &fschmd_driver; - mutex_init(&data->update_lock); + return -ENODEV; /* Detect & Identify the chip */ if (kind <= 0) { @@ -650,9 +649,31 @@ static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind) else if (!strcmp(id, "HMD")) kind = fschmd; else - goto exit_free; + return -ENODEV; } + strlcpy(info->type, client_names[kind - 1], I2C_NAME_SIZE); + + return 0; +} + +static int fschmd_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fschmd_data *data; + u8 revision; + const char * const names[5] = { "Poseidon", "Hermes", "Scylla", + "Heracles", "Heimdall" }; + int i, err; + enum chips kind = id->driver_data; + + data = kzalloc(sizeof(struct fschmd_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + if (kind == fscpos) { /* The Poseidon has hardwired temp limits, fill these in for the alarm resetting code */ @@ -674,11 +695,6 @@ static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind) /* i2c kind goes from 1-5, we want from 0-4 to address arrays */ data->kind = kind - 1; - strlcpy(client->name, client_names[data->kind], I2C_NAME_SIZE); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; for (i = 0; i < ARRAY_SIZE(fschmd_attr); i++) { err = device_create_file(&client->dev, @@ -726,25 +742,14 @@ static int fschmd_detect(struct i2c_adapter *adapter, int address, int kind) return 0; exit_detach: - fschmd_detach_client(client); /* will also free data for us */ - return err; - -exit_free: - kfree(data); + fschmd_remove(client); /* will also free data for us */ return err; } -static int fschmd_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, fschmd_detect); -} - -static int fschmd_detach_client(struct i2c_client *client) +static int fschmd_remove(struct i2c_client *client) { struct fschmd_data *data = i2c_get_clientdata(client); - int i, err; + int i; /* Check if registered in case we're called from fschmd_detect to cleanup after an error */ @@ -760,9 +765,6 @@ static int fschmd_detach_client(struct i2c_client *client) device_remove_file(&client->dev, &fschmd_fan_attr[i].dev_attr); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } -- cgit v1.2.3 From b9e39b1b1b79d3e074ca79b63f548ac48c85ca98 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:12 +0200 Subject: hwmon: (fscpos) Convert to a new-style i2c driver The new-style fscpos driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/fscpos.c | 94 ++++++++++++++++++++++---------------------------- 1 file changed, 41 insertions(+), 53 deletions(-) diff --git a/drivers/hwmon/fscpos.c b/drivers/hwmon/fscpos.c index 00f48484e54b..8a7bcf500b4e 100644 --- a/drivers/hwmon/fscpos.c +++ b/drivers/hwmon/fscpos.c @@ -87,9 +87,11 @@ static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 }; /* * Functions declaration */ -static int fscpos_attach_adapter(struct i2c_adapter *adapter); -static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind); -static int fscpos_detach_client(struct i2c_client *client); +static int fscpos_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int fscpos_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int fscpos_remove(struct i2c_client *client); static int fscpos_read_value(struct i2c_client *client, u8 reg); static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value); @@ -101,19 +103,27 @@ static void reset_fan_alarm(struct i2c_client *client, int nr); /* * Driver data (common to all clients) */ +static const struct i2c_device_id fscpos_id[] = { + { "fscpos", fscpos }, + { } +}; + static struct i2c_driver fscpos_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "fscpos", }, - .attach_adapter = fscpos_attach_adapter, - .detach_client = fscpos_detach_client, + .probe = fscpos_probe, + .remove = fscpos_remove, + .id_table = fscpos_id, + .detect = fscpos_detect, + .address_data = &addr_data, }; /* * Client data (each client gets its own) */ struct fscpos_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* 0 until following fields are valid */ @@ -470,39 +480,14 @@ static const struct attribute_group fscpos_group = { .attrs = fscpos_attributes, }; -static int fscpos_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, fscpos_detect); -} - -static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int fscpos_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct fscpos_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - /* - * OK. For now, we presume we have a valid client. We now create the - * client structure, even though we cannot fill it completely yet. - * But it allows us to access fscpos_{read,write}_value. - */ - - if (!(data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &fscpos_driver; - new_client->flags = 0; + return -ENODEV; /* Do the remaining detection unless force or force_fscpos parameter */ if (kind < 0) { @@ -512,22 +497,30 @@ static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) != 0x45) /* 'E' */ || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2) != 0x47))/* 'G' */ - { - dev_dbg(&new_client->dev, "fscpos detection failed\n"); - goto exit_free; - } + return -ENODEV; } - /* Fill in the remaining client fields and put it in the global list */ - strlcpy(new_client->name, "fscpos", I2C_NAME_SIZE); + strlcpy(info->type, "fscpos", I2C_NAME_SIZE); + return 0; +} + +static int fscpos_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct fscpos_data *data; + int err; + + data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Inizialize the fscpos chip */ fscpos_init_client(new_client); @@ -536,7 +529,7 @@ static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -548,24 +541,19 @@ static int fscpos_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &fscpos_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } -static int fscpos_detach_client(struct i2c_client *client) +static int fscpos_remove(struct i2c_client *client) { struct fscpos_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &fscpos_group); - if ((err = i2c_detach_client(client))) - return err; kfree(data); return 0; } -- cgit v1.2.3 From 95d80e7c834d8742da38e2b9d2f36dec36da03a6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:13 +0200 Subject: hwmon: (gl518sm) Convert to a new-style i2c driver The new-style gl518sm driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/gl518sm.c | 99 +++++++++++++++++++++++-------------------------- 1 file changed, 47 insertions(+), 52 deletions(-) diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c index 33e9e8a8d1ce..7820df45d77a 100644 --- a/drivers/hwmon/gl518sm.c +++ b/drivers/hwmon/gl518sm.c @@ -114,7 +114,6 @@ static inline u8 FAN_TO_REG(long rpm, int div) /* Each client has this additional data */ struct gl518_data { - struct i2c_client client; struct device *hwmon_dev; enum chips type; @@ -138,21 +137,33 @@ struct gl518_data { u8 beep_enable; /* Boolean */ }; -static int gl518_attach_adapter(struct i2c_adapter *adapter); -static int gl518_detect(struct i2c_adapter *adapter, int address, int kind); +static int gl518_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int gl518_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void gl518_init_client(struct i2c_client *client); -static int gl518_detach_client(struct i2c_client *client); +static int gl518_remove(struct i2c_client *client); static int gl518_read_value(struct i2c_client *client, u8 reg); static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value); static struct gl518_data *gl518_update_device(struct device *dev); +static const struct i2c_device_id gl518_id[] = { + { "gl518sm", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, gl518_id); + /* This is the driver that will be inserted */ static struct i2c_driver gl518_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "gl518sm", }, - .attach_adapter = gl518_attach_adapter, - .detach_client = gl518_detach_client, + .probe = gl518_probe, + .remove = gl518_remove, + .id_table = gl518_id, + .detect = gl518_detect, + .address_data = &addr_data, }; /* @@ -472,46 +483,23 @@ static const struct attribute_group gl518_group_r80 = { * Real code */ -static int gl518_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, gl518_detect); -} - -static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int gl518_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { + struct i2c_adapter *adapter = client->adapter; int i; - struct i2c_client *client; - struct gl518_data *data; - int err = 0; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access gl518_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - - client->addr = address; - client->adapter = adapter; - client->driver = &gl518_driver; + return -ENODEV; /* Now, we do the remaining detection. */ if (kind < 0) { if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80) || (gl518_read_value(client, GL518_REG_CONF) & 0x80)) - goto exit_free; + return -ENODEV; } /* Determine the chip type. */ @@ -526,19 +514,32 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Ignoring 'force' parameter for unknown " "chip at adapter %d, address 0x%02x\n", - i2c_adapter_id(adapter), address); - goto exit_free; + i2c_adapter_id(adapter), client->addr); + return -ENODEV; } } - /* Fill in the remaining client fields */ - strlcpy(client->name, "gl518sm", I2C_NAME_SIZE); - data->type = kind; - mutex_init(&data->update_lock); + strlcpy(info->type, "gl518sm", I2C_NAME_SIZE); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; + return 0; +} + +static int gl518_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct gl518_data *data; + int err, revision; + + data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + revision = gl518_read_value(client, GL518_REG_REVISION); + data->type = revision == 0x80 ? gl518sm_r80 : gl518sm_r00; + mutex_init(&data->update_lock); /* Initialize the GL518SM chip */ data->alarm_mask = 0xff; @@ -546,7 +547,7 @@ static int gl518_detect(struct i2c_adapter *adapter, int address, int kind) /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &gl518_group))) - goto exit_detach; + goto exit_free; if (data->type == gl518sm_r80) if ((err = sysfs_create_group(&client->dev.kobj, &gl518_group_r80))) @@ -564,8 +565,6 @@ exit_remove_files: sysfs_remove_group(&client->dev.kobj, &gl518_group); if (data->type == gl518sm_r80) sysfs_remove_group(&client->dev.kobj, &gl518_group_r80); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: @@ -591,19 +590,15 @@ static void gl518_init_client(struct i2c_client *client) gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue); } -static int gl518_detach_client(struct i2c_client *client) +static int gl518_remove(struct i2c_client *client) { struct gl518_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &gl518_group); if (data->type == gl518sm_r80) sysfs_remove_group(&client->dev.kobj, &gl518_group_r80); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } -- cgit v1.2.3 From a23a9fe1d4d725e1624635f49e9790ec32deffd0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:13 +0200 Subject: hwmon: (gl520sm) Convert to a new-style i2c driver The new-style gl520sm driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Maarten Deprez --- drivers/hwmon/gl520sm.c | 91 +++++++++++++++++++++++-------------------------- 1 file changed, 43 insertions(+), 48 deletions(-) diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c index 8984ef141627..19616f2242b0 100644 --- a/drivers/hwmon/gl520sm.c +++ b/drivers/hwmon/gl520sm.c @@ -79,26 +79,37 @@ static const u8 GL520_REG_TEMP_MAX_HYST[] = { 0x06, 0x18 }; * Function declarations */ -static int gl520_attach_adapter(struct i2c_adapter *adapter); -static int gl520_detect(struct i2c_adapter *adapter, int address, int kind); +static int gl520_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int gl520_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void gl520_init_client(struct i2c_client *client); -static int gl520_detach_client(struct i2c_client *client); +static int gl520_remove(struct i2c_client *client); static int gl520_read_value(struct i2c_client *client, u8 reg); static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value); static struct gl520_data *gl520_update_device(struct device *dev); /* Driver data */ +static const struct i2c_device_id gl520_id[] = { + { "gl520sm", gl520sm }, + { } +}; +MODULE_DEVICE_TABLE(i2c, gl520_id); + static struct i2c_driver gl520_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "gl520sm", }, - .attach_adapter = gl520_attach_adapter, - .detach_client = gl520_detach_client, + .probe = gl520_probe, + .remove = gl520_remove, + .id_table = gl520_id, + .detect = gl520_detect, + .address_data = &addr_data, }; /* Client data */ struct gl520_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until the following fields are valid */ @@ -669,37 +680,15 @@ static const struct attribute_group gl520_group_opt = { * Real code */ -static int gl520_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, gl520_detect); -} - -static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int gl520_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct gl520_data *data; - int err = 0; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access gl520_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &gl520_driver; + return -ENODEV; /* Determine the chip type. */ if (kind < 0) { @@ -707,24 +696,36 @@ static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) || ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) { dev_dbg(&client->dev, "Unknown chip type, skipping\n"); - goto exit_free; + return -ENODEV; } } - /* Fill in the remaining client fields */ - strlcpy(client->name, "gl520sm", I2C_NAME_SIZE); - mutex_init(&data->update_lock); + strlcpy(info->type, "gl520sm", I2C_NAME_SIZE); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; + return 0; +} + +static int gl520_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct gl520_data *data; + int err; + + data = kzalloc(sizeof(struct gl520_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); /* Initialize the GL520SM chip */ gl520_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &gl520_group))) - goto exit_detach; + goto exit_free; if (data->two_temps) { if ((err = device_create_file(&client->dev, @@ -764,8 +765,6 @@ static int gl520_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&client->dev.kobj, &gl520_group); sysfs_remove_group(&client->dev.kobj, &gl520_group_opt); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: @@ -811,18 +810,14 @@ static void gl520_init_client(struct i2c_client *client) gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); } -static int gl520_detach_client(struct i2c_client *client) +static int gl520_remove(struct i2c_client *client) { struct gl520_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &gl520_group); sysfs_remove_group(&client->dev.kobj, &gl520_group_opt); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } -- cgit v1.2.3 From d5957be2f1535b1a6c77eabba0781ec7245c5dea Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:13 +0200 Subject: hwmon: (lm63) Convert to a new-style i2c driver The new-style lm63 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/lm63.c | 99 +++++++++++++++++++++++----------------------------- 1 file changed, 44 insertions(+), 55 deletions(-) diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index 116287008083..3195a265f0e9 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -1,7 +1,7 @@ /* * lm63.c - driver for the National Semiconductor LM63 temperature sensor * with integrated fan control - * Copyright (C) 2004-2006 Jean Delvare + * Copyright (C) 2004-2008 Jean Delvare * Based on the lm90 driver. * * The LM63 is a sensor chip made by National Semiconductor. It measures @@ -128,24 +128,36 @@ I2C_CLIENT_INSMOD_1(lm63); * Functions declaration */ -static int lm63_attach_adapter(struct i2c_adapter *adapter); -static int lm63_detach_client(struct i2c_client *client); +static int lm63_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int lm63_remove(struct i2c_client *client); static struct lm63_data *lm63_update_device(struct device *dev); -static int lm63_detect(struct i2c_adapter *adapter, int address, int kind); +static int lm63_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void lm63_init_client(struct i2c_client *client); /* * Driver data (common to all clients) */ +static const struct i2c_device_id lm63_id[] = { + { "lm63", lm63 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm63_id); + static struct i2c_driver lm63_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm63", }, - .attach_adapter = lm63_attach_adapter, - .detach_client = lm63_detach_client, + .probe = lm63_probe, + .remove = lm63_remove, + .id_table = lm63_id, + .detect = lm63_detect, + .address_data = &addr_data, }; /* @@ -153,7 +165,6 @@ static struct i2c_driver lm63_driver = { */ struct lm63_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -411,43 +422,14 @@ static const struct attribute_group lm63_group_fan1 = { * Real code */ -static int lm63_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm63_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm63_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct lm63_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right before the - LM63-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm63_driver; - new_client->flags = 0; - - /* Default to an LM63 if forced */ - if (kind == 0) - kind = lm63; + return -ENODEV; if (kind < 0) { /* must identify */ u8 man_id, chip_id, reg_config1, reg_config2; @@ -477,25 +459,38 @@ static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) dev_dbg(&adapter->dev, "Unsupported chip " "(man_id=0x%02X, chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } - strlcpy(new_client->name, "lm63", I2C_NAME_SIZE); + strlcpy(info->type, "lm63", I2C_NAME_SIZE); + + return 0; +} + +static int lm63_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct lm63_data *data; + int err; + + data = kzalloc(sizeof(struct lm63_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Initialize the LM63 chip */ lm63_init_client(new_client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm63_group))) - goto exit_detach; + goto exit_free; if (data->config & 0x04) { /* tachometer enabled */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm63_group_fan1))) @@ -513,8 +508,6 @@ static int lm63_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &lm63_group); sysfs_remove_group(&new_client->dev.kobj, &lm63_group_fan1); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -556,18 +549,14 @@ static void lm63_init_client(struct i2c_client *client) (data->config_fan & 0x20) ? "manual" : "auto"); } -static int lm63_detach_client(struct i2c_client *client) +static int lm63_remove(struct i2c_client *client) { struct lm63_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm63_group); sysfs_remove_group(&client->dev.kobj, &lm63_group_fan1); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } -- cgit v1.2.3 From a189dd62d328db7bf8ba68de6a948fdbc93dca25 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:13 +0200 Subject: hwmon: (lm77) Convert to a new-style i2c driver The new-style lm77 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Andras Bali --- drivers/hwmon/lm77.c | 102 +++++++++++++++++++++++---------------------------- 1 file changed, 45 insertions(+), 57 deletions(-) diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c index 36d5a8c3ad8c..866b401ab6e8 100644 --- a/drivers/hwmon/lm77.c +++ b/drivers/hwmon/lm77.c @@ -52,7 +52,6 @@ I2C_CLIENT_INSMOD_1(lm77); /* Each client has this additional data */ struct lm77_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; @@ -65,23 +64,35 @@ struct lm77_data { u8 alarms; }; -static int lm77_attach_adapter(struct i2c_adapter *adapter); -static int lm77_detect(struct i2c_adapter *adapter, int address, int kind); +static int lm77_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int lm77_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void lm77_init_client(struct i2c_client *client); -static int lm77_detach_client(struct i2c_client *client); +static int lm77_remove(struct i2c_client *client); static u16 lm77_read_value(struct i2c_client *client, u8 reg); static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value); static struct lm77_data *lm77_update_device(struct device *dev); +static const struct i2c_device_id lm77_id[] = { + { "lm77", lm77 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm77_id); + /* This is the driver that will be inserted */ static struct i2c_driver lm77_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm77", }, - .attach_adapter = lm77_attach_adapter, - .detach_client = lm77_detach_client, + .probe = lm77_probe, + .remove = lm77_remove, + .id_table = lm77_id, + .detect = lm77_detect, + .address_data = &addr_data, }; /* straight from the datasheet */ @@ -215,13 +226,6 @@ static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 2); static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 1); -static int lm77_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm77_detect); -} - static struct attribute *lm77_attributes[] = { &dev_attr_temp1_input.attr, &dev_attr_temp1_crit.attr, @@ -240,32 +244,15 @@ static const struct attribute_group lm77_group = { .attrs = lm77_attributes, }; -/* This function is called by i2c_probe */ -static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm77_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct lm77_data *data; - int err = 0; - const char *name = ""; + struct i2c_adapter *adapter = new_client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm77_{read,write}_value. */ - if (!(data = kzalloc(sizeof(struct lm77_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm77_driver; - new_client->flags = 0; + return -ENODEV; /* Here comes the remaining detection. Since the LM77 has no register dedicated to identification, we have to rely on the @@ -294,7 +281,7 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) || i2c_smbus_read_word_data(new_client, i + 3) != crit || i2c_smbus_read_word_data(new_client, i + 4) != min || i2c_smbus_read_word_data(new_client, i + 5) != max) - goto exit_free; + return -ENODEV; /* sign bits */ if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0) @@ -302,51 +289,55 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0) || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0) || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0)) - goto exit_free; + return -ENODEV; /* unused bits */ if (conf & 0xe0) - goto exit_free; + return -ENODEV; /* 0x06 and 0x07 return the last read value */ cur = i2c_smbus_read_word_data(new_client, 0); if (i2c_smbus_read_word_data(new_client, 6) != cur || i2c_smbus_read_word_data(new_client, 7) != cur) - goto exit_free; + return -ENODEV; hyst = i2c_smbus_read_word_data(new_client, 2); if (i2c_smbus_read_word_data(new_client, 6) != hyst || i2c_smbus_read_word_data(new_client, 7) != hyst) - goto exit_free; + return -ENODEV; min = i2c_smbus_read_word_data(new_client, 4); if (i2c_smbus_read_word_data(new_client, 6) != min || i2c_smbus_read_word_data(new_client, 7) != min) - goto exit_free; + return -ENODEV; } - /* Determine the chip type - only one kind supported! */ - if (kind <= 0) - kind = lm77; + strlcpy(info->type, "lm77", I2C_NAME_SIZE); - if (kind == lm77) { - name = "lm77"; + return 0; +} + +static int lm77_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct lm77_data *data; + int err; + + data = kzalloc(sizeof(struct lm77_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; } - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Initialize the LM77 chip */ lm77_init_client(new_client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm77_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -358,20 +349,17 @@ static int lm77_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&new_client->dev.kobj, &lm77_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } -static int lm77_detach_client(struct i2c_client *client) +static int lm77_remove(struct i2c_client *client) { struct lm77_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm77_group); - i2c_detach_client(client); kfree(data); return 0; } -- cgit v1.2.3 From 8c8bacc883610b672d3f08dc6ebf1f17e495f5b9 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:14 +0200 Subject: hwmon: (lm80) Convert to a new-style i2c driver The new-style lm80 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/lm80.c | 94 ++++++++++++++++++++++++---------------------------- 1 file changed, 43 insertions(+), 51 deletions(-) diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c index 26c91c9d4769..bcffc1899403 100644 --- a/drivers/hwmon/lm80.c +++ b/drivers/hwmon/lm80.c @@ -108,7 +108,6 @@ static inline long TEMP_FROM_REG(u16 temp) */ struct lm80_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ @@ -132,10 +131,12 @@ struct lm80_data { * Functions declaration */ -static int lm80_attach_adapter(struct i2c_adapter *adapter); -static int lm80_detect(struct i2c_adapter *adapter, int address, int kind); +static int lm80_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int lm80_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void lm80_init_client(struct i2c_client *client); -static int lm80_detach_client(struct i2c_client *client); +static int lm80_remove(struct i2c_client *client); static struct lm80_data *lm80_update_device(struct device *dev); static int lm80_read_value(struct i2c_client *client, u8 reg); static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value); @@ -144,12 +145,22 @@ static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value); * Driver data (common to all clients) */ +static const struct i2c_device_id lm80_id[] = { + { "lm80", lm80 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm80_id); + static struct i2c_driver lm80_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm80", }, - .attach_adapter = lm80_attach_adapter, - .detach_client = lm80_detach_client, + .probe = lm80_probe, + .remove = lm80_remove, + .id_table = lm80_id, + .detect = lm80_detect, + .address_data = &addr_data, }; /* @@ -383,13 +394,6 @@ static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 13); * Real code */ -static int lm80_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm80_detect); -} - static struct attribute *lm80_attributes[] = { &sensor_dev_attr_in0_min.dev_attr.attr, &sensor_dev_attr_in1_min.dev_attr.attr, @@ -442,53 +446,46 @@ static const struct attribute_group lm80_group = { .attrs = lm80_attributes, }; -static int lm80_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm80_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { + struct i2c_adapter *adapter = client->adapter; int i, cur; - struct i2c_client *client; - struct lm80_data *data; - int err = 0; - const char *name; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm80_{read,write}_value. */ - if (!(data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &lm80_driver; + return -ENODEV; /* Now, we do the remaining detection. It is lousy. */ if (lm80_read_value(client, LM80_REG_ALARM2) & 0xc0) - goto error_free; + return -ENODEV; for (i = 0x2a; i <= 0x3d; i++) { cur = i2c_smbus_read_byte_data(client, i); if ((i2c_smbus_read_byte_data(client, i + 0x40) != cur) || (i2c_smbus_read_byte_data(client, i + 0x80) != cur) || (i2c_smbus_read_byte_data(client, i + 0xc0) != cur)) - goto error_free; + return -ENODEV; } - /* Determine the chip type - only one kind supported! */ - kind = lm80; - name = "lm80"; + strlcpy(info->type, "lm80", I2C_NAME_SIZE); - /* Fill in the remaining client fields */ - strlcpy(client->name, name, I2C_NAME_SIZE); - mutex_init(&data->update_lock); + return 0; +} - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto error_free; +static int lm80_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lm80_data *data; + int err; + + data = kzalloc(sizeof(struct lm80_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); /* Initialize the LM80 chip */ lm80_init_client(client); @@ -499,7 +496,7 @@ static int lm80_detect(struct i2c_adapter *adapter, int address, int kind) /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &lm80_group))) - goto error_detach; + goto error_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -511,23 +508,18 @@ static int lm80_detect(struct i2c_adapter *adapter, int address, int kind) error_remove: sysfs_remove_group(&client->dev.kobj, &lm80_group); -error_detach: - i2c_detach_client(client); error_free: kfree(data); exit: return err; } -static int lm80_detach_client(struct i2c_client *client) +static int lm80_remove(struct i2c_client *client) { struct lm80_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm80_group); - if ((err = i2c_detach_client(client))) - return err; kfree(data); return 0; -- cgit v1.2.3 From b6aacdcefac8ed60e77930b6e74129da6478e20e Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:14 +0200 Subject: hwmon: (lm83) Convert to a new-style i2c driver The new-style lm83 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/lm83.c | 104 ++++++++++++++++++++++++--------------------------- 1 file changed, 49 insertions(+), 55 deletions(-) diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c index 6a8642fa25fb..e59e2d1f080c 100644 --- a/drivers/hwmon/lm83.c +++ b/drivers/hwmon/lm83.c @@ -1,7 +1,7 @@ /* * lm83.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring - * Copyright (C) 2003-2006 Jean Delvare + * Copyright (C) 2003-2008 Jean Delvare * * Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is * a sensor chip made by National Semiconductor. It reports up to four @@ -118,21 +118,34 @@ static const u8 LM83_REG_W_HIGH[] = { * Functions declaration */ -static int lm83_attach_adapter(struct i2c_adapter *adapter); -static int lm83_detect(struct i2c_adapter *adapter, int address, int kind); -static int lm83_detach_client(struct i2c_client *client); +static int lm83_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info); +static int lm83_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int lm83_remove(struct i2c_client *client); static struct lm83_data *lm83_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id lm83_id[] = { + { "lm83", lm83 }, + { "lm82", lm82 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm83_id); + static struct i2c_driver lm83_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm83", }, - .attach_adapter = lm83_attach_adapter, - .detach_client = lm83_detach_client, + .probe = lm83_probe, + .remove = lm83_remove, + .id_table = lm83_id, + .detect = lm83_detect, + .address_data = &addr_data, }; /* @@ -140,7 +153,6 @@ static struct i2c_driver lm83_driver = { */ struct lm83_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -278,40 +290,15 @@ static const struct attribute_group lm83_group_opt = { * Real code */ -static int lm83_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm83_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm83_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *new_client; - struct lm83_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; const char *name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right after the - * LM83-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm83_driver; - new_client->flags = 0; + return -ENODEV; /* Now we do the detection and identification. A negative kind * means that the driver was loaded with no force parameter @@ -335,8 +322,9 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) & 0x41) != 0x00)) { dev_dbg(&adapter->dev, - "LM83 detection failed at 0x%02x.\n", address); - goto exit_free; + "LM83 detection failed at 0x%02x.\n", + new_client->addr); + return -ENODEV; } } @@ -361,7 +349,7 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Unsupported chip (man_id=0x%02X, " "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } @@ -372,15 +360,27 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) name = "lm82"; } - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); + strlcpy(info->type, name, I2C_NAME_SIZE); + + return 0; +} + +static int lm83_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct lm83_data *data; + int err; + + data = kzalloc(sizeof(struct lm83_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* * Register sysfs hooks * The LM82 can only monitor one external diode which is @@ -389,9 +389,9 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm83_group))) - goto exit_detach; + goto exit_free; - if (kind == lm83) { + if (id->driver_data == lm83) { if ((err = sysfs_create_group(&new_client->dev.kobj, &lm83_group_opt))) goto exit_remove_files; @@ -408,26 +408,20 @@ static int lm83_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &lm83_group); sysfs_remove_group(&new_client->dev.kobj, &lm83_group_opt); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } -static int lm83_detach_client(struct i2c_client *client) +static int lm83_remove(struct i2c_client *client) { struct lm83_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm83_group); sysfs_remove_group(&client->dev.kobj, &lm83_group_opt); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } -- cgit v1.2.3 From a888420af07b9a26b6d518328baa913fb704e950 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:14 +0200 Subject: hwmon: (lm87) Convert to a new-style i2c driver The new-style lm87 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Ben Hutchings --- drivers/hwmon/lm87.c | 99 ++++++++++++++++++++++++---------------------------- 1 file changed, 46 insertions(+), 53 deletions(-) diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index e1c183f0aae0..21970f0d53a1 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -5,7 +5,7 @@ * Philip Edelbrock * Stephen Rousset * Dan Eaton - * Copyright (C) 2004,2007 Jean Delvare + * Copyright (C) 2004-2008 Jean Delvare * * Original port to Linux 2.6 by Jeff Oliver. * @@ -157,22 +157,35 @@ static u8 LM87_REG_TEMP_LOW[3] = { 0x3A, 0x38, 0x2C }; * Functions declaration */ -static int lm87_attach_adapter(struct i2c_adapter *adapter); -static int lm87_detect(struct i2c_adapter *adapter, int address, int kind); +static int lm87_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int lm87_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info); static void lm87_init_client(struct i2c_client *client); -static int lm87_detach_client(struct i2c_client *client); +static int lm87_remove(struct i2c_client *client); static struct lm87_data *lm87_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id lm87_id[] = { + { "lm87", lm87 }, + { "adm1024", adm1024 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm87_id); + static struct i2c_driver lm87_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm87", }, - .attach_adapter = lm87_attach_adapter, - .detach_client = lm87_detach_client, + .probe = lm87_probe, + .remove = lm87_remove, + .id_table = lm87_id, + .detect = lm87_detect, + .address_data = &addr_data, }; /* @@ -180,7 +193,6 @@ static struct i2c_driver lm87_driver = { */ struct lm87_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -562,13 +574,6 @@ static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 15); * Real code */ -static int lm87_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm87_detect); -} - static struct attribute *lm87_attributes[] = { &dev_attr_in1_input.attr, &dev_attr_in1_min.attr, @@ -656,33 +661,15 @@ static const struct attribute_group lm87_group_opt = { .attrs = lm87_attributes_opt, }; -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm87_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct lm87_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; static const char *names[] = { "lm87", "adm1024" }; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right before the - LM87-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm87_driver; - new_client->flags = 0; + return -ENODEV; /* Default to an LM87 if forced */ if (kind == 0) @@ -704,20 +691,32 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)) { dev_dbg(&adapter->dev, "LM87 detection failed at 0x%02x.\n", - address); - goto exit_free; + new_client->addr); + return -ENODEV; } } - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, names[kind - 1], I2C_NAME_SIZE); + strlcpy(info->type, names[kind - 1], I2C_NAME_SIZE); + + return 0; +} + +static int lm87_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct lm87_data *data; + int err; + + data = kzalloc(sizeof(struct lm87_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Initialize the LM87 chip */ lm87_init_client(new_client); @@ -732,7 +731,7 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm87_group))) - goto exit_detach; + goto exit_free; if (data->channel & CHAN_NO_FAN(0)) { if ((err = device_create_file(&new_client->dev, @@ -832,8 +831,6 @@ static int lm87_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&new_client->dev.kobj, &lm87_group); sysfs_remove_group(&new_client->dev.kobj, &lm87_group_opt); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -877,18 +874,14 @@ static void lm87_init_client(struct i2c_client *client) } } -static int lm87_detach_client(struct i2c_client *client) +static int lm87_remove(struct i2c_client *client) { struct lm87_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm87_group); sysfs_remove_group(&client->dev.kobj, &lm87_group_opt); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } -- cgit v1.2.3 From 9b0e85269275159a1f9c3e4a5d254caf5211950b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:15 +0200 Subject: hwmon: (lm90) Convert to a new-style i2c driver The new-style lm90 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/lm90.c | 119 +++++++++++++++++++++++++++------------------------ 1 file changed, 63 insertions(+), 56 deletions(-) diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index d1a3da3dd8e0..c24fe36ac787 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -187,23 +187,44 @@ I2C_CLIENT_INSMOD_7(lm90, adm1032, lm99, lm86, max6657, adt7461, max6680); * Functions declaration */ -static int lm90_attach_adapter(struct i2c_adapter *adapter); -static int lm90_detect(struct i2c_adapter *adapter, int address, - int kind); +static int lm90_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int lm90_probe(struct i2c_client *client, + const struct i2c_device_id *id); static void lm90_init_client(struct i2c_client *client); -static int lm90_detach_client(struct i2c_client *client); +static int lm90_remove(struct i2c_client *client); static struct lm90_data *lm90_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id lm90_id[] = { + { "adm1032", adm1032 }, + { "adt7461", adt7461 }, + { "lm90", lm90 }, + { "lm86", lm86 }, + { "lm89", lm99 }, + { "lm99", lm99 }, /* Missing temperature offset */ + { "max6657", max6657 }, + { "max6658", max6657 }, + { "max6659", max6657 }, + { "max6680", max6680 }, + { "max6681", max6680 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm90_id); + static struct i2c_driver lm90_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm90", }, - .attach_adapter = lm90_attach_adapter, - .detach_client = lm90_detach_client, + .probe = lm90_probe, + .remove = lm90_remove, + .id_table = lm90_id, + .detect = lm90_detect, + .address_data = &addr_data, }; /* @@ -211,7 +232,6 @@ static struct i2c_driver lm90_driver = { */ struct lm90_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -477,40 +497,16 @@ static int lm90_read_reg(struct i2c_client* client, u8 reg, u8 *value) return 0; } -static int lm90_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm90_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm90_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct lm90_data *data; - int err = 0; + struct i2c_adapter *adapter = new_client->adapter; + int address = new_client->addr; const char *name = ""; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right before the - LM90-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm90_driver; - new_client->flags = 0; + return -ENODEV; /* * Now we do the remaining detection. A negative kind means that @@ -538,7 +534,7 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) LM90_REG_R_CONFIG1)) < 0 || (reg_convrate = i2c_smbus_read_byte_data(new_client, LM90_REG_R_CONVRATE)) < 0) - goto exit_free; + return -ENODEV; if ((address == 0x4C || address == 0x4D) && man_id == 0x01) { /* National Semiconductor */ @@ -546,7 +542,7 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) if ((reg_config2 = i2c_smbus_read_byte_data(new_client, LM90_REG_R_CONFIG2)) < 0) - goto exit_free; + return -ENODEV; if ((reg_config1 & 0x2A) == 0x00 && (reg_config2 & 0xF8) == 0x00 @@ -610,10 +606,11 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Unsupported chip (man_id=0x%02X, " "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } + /* Fill the i2c board info */ if (kind == lm90) { name = "lm90"; } else if (kind == adm1032) { @@ -621,7 +618,7 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) /* The ADM1032 supports PEC, but only if combined transactions are not used. */ if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) - new_client->flags |= I2C_CLIENT_PEC; + info->flags |= I2C_CLIENT_PEC; } else if (kind == lm99) { name = "lm99"; } else if (kind == lm86) { @@ -633,23 +630,39 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) } else if (kind == adt7461) { name = "adt7461"; } + strlcpy(info->type, name, I2C_NAME_SIZE); + + return 0; +} + +static int lm90_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = to_i2c_adapter(new_client->dev.parent); + struct lm90_data *data; + int err; - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - data->kind = kind; + data = kzalloc(sizeof(struct lm90_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + i2c_set_clientdata(new_client, data); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; + /* Set the device type */ + data->kind = id->driver_data; + if (data->kind == adm1032) { + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) + new_client->flags &= ~I2C_CLIENT_PEC; + } /* Initialize the LM90 chip */ lm90_init_client(new_client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm90_group))) - goto exit_detach; + goto exit_free; if (new_client->flags & I2C_CLIENT_PEC) { if ((err = device_create_file(&new_client->dev, &dev_attr_pec))) @@ -672,8 +685,6 @@ static int lm90_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &lm90_group); device_remove_file(&new_client->dev, &dev_attr_pec); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -710,10 +721,9 @@ static void lm90_init_client(struct i2c_client *client) i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config); } -static int lm90_detach_client(struct i2c_client *client) +static int lm90_remove(struct i2c_client *client) { struct lm90_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm90_group); @@ -722,9 +732,6 @@ static int lm90_detach_client(struct i2c_client *client) device_remove_file(&client->dev, &sensor_dev_attr_temp2_offset.dev_attr); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } -- cgit v1.2.3 From 910e8dcf16dd7afc08dc1791155cc69e07ca4183 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:15 +0200 Subject: hwmon: (lm92) Convert to a new-style i2c driver The new-style lm92 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/lm92.c | 98 +++++++++++++++++++++------------------------------- 1 file changed, 40 insertions(+), 58 deletions(-) diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c index c31942e08246..b2e00c5a7eec 100644 --- a/drivers/hwmon/lm92.c +++ b/drivers/hwmon/lm92.c @@ -1,6 +1,6 @@ /* * lm92 - Hardware monitoring driver - * Copyright (C) 2005 Jean Delvare + * Copyright (C) 2005-2008 Jean Delvare * * Based on the lm90 driver, with some ideas taken from the lm_sensors * lm92 driver as well. @@ -96,7 +96,6 @@ static struct i2c_driver lm92_driver; /* Client data (each client gets its own) */ struct lm92_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -319,32 +318,15 @@ static const struct attribute_group lm92_group = { .attrs = lm92_attributes, }; -/* The following function does more than just detection. If detection - succeeds, it also registers the new chip. */ -static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm92_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct lm92_data *data; - int err = 0; - char *name; + struct i2c_adapter *adapter = new_client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct lm92_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* Fill in enough client fields so that we can read from the chip, - which is required for identication */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm92_driver; - new_client->flags = 0; + return -ENODEV; /* A negative kind means that the driver was loaded with no force parameter (default), so we must identify the chip. */ @@ -364,34 +346,36 @@ static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) kind = lm92; /* No separate prefix */ } else - goto exit_free; - } else - if (kind == 0) /* Default to an LM92 if forced */ - kind = lm92; - - /* Give it the proper name */ - if (kind == lm92) { - name = "lm92"; - } else { /* Supposedly cannot happen */ - dev_dbg(&new_client->dev, "Kind out of range?\n"); - goto exit_free; + return -ENODEV; } - /* Fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); + strlcpy(info->type, "lm92", I2C_NAME_SIZE); + + return 0; +} + +static int lm92_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct lm92_data *data; + int err; + + data = kzalloc(sizeof(struct lm92_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the i2c subsystem a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Initialize the chipset */ lm92_init_client(new_client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm92_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -403,32 +387,19 @@ static int lm92_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&new_client->dev.kobj, &lm92_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: return err; } -static int lm92_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, lm92_detect); -} - -static int lm92_detach_client(struct i2c_client *client) +static int lm92_remove(struct i2c_client *client) { struct lm92_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm92_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } @@ -438,12 +409,23 @@ static int lm92_detach_client(struct i2c_client *client) * Module and driver stuff */ +static const struct i2c_device_id lm92_id[] = { + { "lm92", lm92 }, + /* max6635 could be added here */ + { } +}; +MODULE_DEVICE_TABLE(i2c, lm92_id); + static struct i2c_driver lm92_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm92", }, - .attach_adapter = lm92_attach_adapter, - .detach_client = lm92_detach_client, + .probe = lm92_probe, + .remove = lm92_remove, + .id_table = lm92_id, + .detect = lm92_detect, + .address_data = &addr_data, }; static int __init sensors_lm92_init(void) -- cgit v1.2.3 From 70b724063f789a443aff1e1a6f0f04d971342116 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:15 +0200 Subject: hwmon: (lm93) Convert to a new-style i2c driver The new-style lm93 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Mark M. Hoffman Cc: Eric J. Bowersox Cc: Carsten Emde Cc: Hans J. Koch --- drivers/hwmon/lm93.c | 126 ++++++++++++++++++++++++--------------------------- 1 file changed, 60 insertions(+), 66 deletions(-) diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c index 5e678f5c883d..fc36cadf36fb 100644 --- a/drivers/hwmon/lm93.c +++ b/drivers/hwmon/lm93.c @@ -200,7 +200,6 @@ struct block1_t { * Client-specific data */ struct lm93_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; @@ -2501,45 +2500,14 @@ static void lm93_init_client(struct i2c_client *client) "chip to signal ready!\n"); } -static int lm93_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm93_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct lm93_data *data; - struct i2c_client *client; - - int err = -ENODEV, func; - void (*update)(struct lm93_data *, struct i2c_client *); - - /* choose update routine based on bus capabilities */ - func = i2c_get_functionality(adapter); - if ( ((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) && - (!disable_block) ) { - dev_dbg(&adapter->dev,"using SMBus block data transactions\n"); - update = lm93_update_client_full; - } else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) { - dev_dbg(&adapter->dev,"disabled SMBus block data " - "transactions\n"); - update = lm93_update_client_min; - } else { - dev_dbg(&adapter->dev,"detect failed, " - "smbus byte and/or word data not supported!\n"); - goto err_out; - } + struct i2c_adapter *adapter = client->adapter; - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm78_{read,write}_value. */ - - if ( !(data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL))) { - dev_dbg(&adapter->dev,"out of memory!\n"); - err = -ENOMEM; - goto err_out; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &lm93_driver; + if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN)) + return -ENODEV; /* detection */ if (kind < 0) { @@ -2548,7 +2516,7 @@ static int lm93_detect(struct i2c_adapter *adapter, int address, int kind) if (mfr != 0x01) { dev_dbg(&adapter->dev,"detect failed, " "bad manufacturer id 0x%02x!\n", mfr); - goto err_free; + return -ENODEV; } } @@ -2563,31 +2531,61 @@ static int lm93_detect(struct i2c_adapter *adapter, int address, int kind) if (kind == 0) dev_dbg(&adapter->dev, "(ignored 'force' parameter)\n"); - goto err_free; + return -ENODEV; } } - /* fill in remaining client fields */ - strlcpy(client->name, "lm93", I2C_NAME_SIZE); + strlcpy(info->type, "lm93", I2C_NAME_SIZE); dev_dbg(&adapter->dev,"loading %s at %d,0x%02x\n", client->name, i2c_adapter_id(client->adapter), client->addr); + return 0; +} + +static int lm93_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lm93_data *data; + int err, func; + void (*update)(struct lm93_data *, struct i2c_client *); + + /* choose update routine based on bus capabilities */ + func = i2c_get_functionality(client->adapter); + if (((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) && + (!disable_block)) { + dev_dbg(&client->dev, "using SMBus block data transactions\n"); + update = lm93_update_client_full; + } else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) { + dev_dbg(&client->dev, "disabled SMBus block data " + "transactions\n"); + update = lm93_update_client_min; + } else { + dev_dbg(&client->dev, "detect failed, " + "smbus byte and/or word data not supported!\n"); + err = -ENODEV; + goto err_out; + } + + data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL); + if (!data) { + dev_dbg(&client->dev, "out of memory!\n"); + err = -ENOMEM; + goto err_out; + } + i2c_set_clientdata(client, data); + /* housekeeping */ data->valid = 0; data->update = update; mutex_init(&data->update_lock); - /* tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto err_free; - /* initialize the chip */ lm93_init_client(client); err = sysfs_create_group(&client->dev.kobj, &lm93_attr_grp); if (err) - goto err_detach; + goto err_free; /* Register hwmon driver class */ data->hwmon_dev = hwmon_device_register(&client->dev); @@ -2597,43 +2595,39 @@ static int lm93_detect(struct i2c_adapter *adapter, int address, int kind) err = PTR_ERR(data->hwmon_dev); dev_err(&client->dev, "error registering hwmon device.\n"); sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp); -err_detach: - i2c_detach_client(client); err_free: kfree(data); err_out: return err; } -/* This function is called when: - * lm93_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and lm93_driver is still present) */ -static int lm93_attach_adapter(struct i2c_adapter *adapter) -{ - return i2c_probe(adapter, &addr_data, lm93_detect); -} - -static int lm93_detach_client(struct i2c_client *client) +static int lm93_remove(struct i2c_client *client) { struct lm93_data *data = i2c_get_clientdata(client); - int err = 0; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp); - err = i2c_detach_client(client); - if (!err) - kfree(data); - return err; + kfree(data); + return 0; } +static const struct i2c_device_id lm93_id[] = { + { "lm93", lm93 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm93_id); + static struct i2c_driver lm93_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "lm93", }, - .attach_adapter = lm93_attach_adapter, - .detach_client = lm93_detach_client, + .probe = lm93_probe, + .remove = lm93_remove, + .id_table = lm93_id, + .detect = lm93_detect, + .address_data = &addr_data, }; static int __init lm93_init(void) -- cgit v1.2.3 From c6d3f6fa1b0b984991d6e2a261c7dd7f2685c7bd Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:15 +0200 Subject: hwmon: (max1619) Convert to a new-style i2c driver The new-style max1619 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Alexey Fisher --- drivers/hwmon/max1619.c | 101 +++++++++++++++++++++--------------------------- 1 file changed, 44 insertions(+), 57 deletions(-) diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c index 7e7267a04544..1ab1cacad598 100644 --- a/drivers/hwmon/max1619.c +++ b/drivers/hwmon/max1619.c @@ -79,23 +79,34 @@ I2C_CLIENT_INSMOD_1(max1619); * Functions declaration */ -static int max1619_attach_adapter(struct i2c_adapter *adapter); -static int max1619_detect(struct i2c_adapter *adapter, int address, - int kind); +static int max1619_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int max1619_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static void max1619_init_client(struct i2c_client *client); -static int max1619_detach_client(struct i2c_client *client); +static int max1619_remove(struct i2c_client *client); static struct max1619_data *max1619_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id max1619_id[] = { + { "max1619", max1619 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max1619_id); + static struct i2c_driver max1619_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "max1619", }, - .attach_adapter = max1619_attach_adapter, - .detach_client = max1619_detach_client, + .probe = max1619_probe, + .remove = max1619_remove, + .id_table = max1619_id, + .detect = max1619_detect, + .address_data = &addr_data, }; /* @@ -103,7 +114,6 @@ static struct i2c_driver max1619_driver = { */ struct max1619_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -208,41 +218,15 @@ static const struct attribute_group max1619_group = { * Real code */ -static int max1619_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, max1619_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int max1619_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct max1619_data *data; - int err = 0; - const char *name = ""; + struct i2c_adapter *adapter = new_client->adapter; u8 reg_config=0, reg_convrate=0, reg_status=0; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right before the - MAX1619-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &max1619_driver; - new_client->flags = 0; + return -ENODEV; /* * Now we do the remaining detection. A negative kind means that @@ -265,8 +249,8 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) { dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x.\n", - address); - goto exit_free; + new_client->addr); + return -ENODEV; } } @@ -285,28 +269,37 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Unsupported chip (man_id=0x%02X, " "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } - if (kind == max1619) - name = "max1619"; + strlcpy(info->type, "max1619", I2C_NAME_SIZE); + + return 0; +} + +static int max1619_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct max1619_data *data; + int err; + + data = kzalloc(sizeof(struct max1619_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } - /* We can fill in the remaining client fields */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* Initialize the MAX1619 chip */ max1619_init_client(new_client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&new_client->dev.kobj, &max1619_group))) - goto exit_detach; + goto exit_free; data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -318,8 +311,6 @@ static int max1619_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove_files: sysfs_remove_group(&new_client->dev.kobj, &max1619_group); -exit_detach: - i2c_detach_client(new_client); exit_free: kfree(data); exit: @@ -341,17 +332,13 @@ static void max1619_init_client(struct i2c_client *client) config & 0xBF); /* run */ } -static int max1619_detach_client(struct i2c_client *client) +static int max1619_remove(struct i2c_client *client) { struct max1619_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &max1619_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; } -- cgit v1.2.3 From 0d57abd5b87e2e82d8d2e8d5c9a3b56743ffa5ab Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:16 +0200 Subject: hwmon: (max6650) Convert to a new-style i2c driver The new-style max6650 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Hans J. Koch --- drivers/hwmon/max6650.c | 102 ++++++++++++++++++++++-------------------------- 1 file changed, 47 insertions(+), 55 deletions(-) diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c index 52d528b76cc3..f27af6a9da41 100644 --- a/drivers/hwmon/max6650.c +++ b/drivers/hwmon/max6650.c @@ -104,22 +104,34 @@ I2C_CLIENT_INSMOD_1(max6650); #define DIV_FROM_REG(reg) (1 << (reg & 7)) -static int max6650_attach_adapter(struct i2c_adapter *adapter); -static int max6650_detect(struct i2c_adapter *adapter, int address, int kind); +static int max6650_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int max6650_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); static int max6650_init_client(struct i2c_client *client); -static int max6650_detach_client(struct i2c_client *client); +static int max6650_remove(struct i2c_client *client); static struct max6650_data *max6650_update_device(struct device *dev); /* * Driver data (common to all clients) */ +static const struct i2c_device_id max6650_id[] = { + { "max6650", max6650 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max6650_id); + static struct i2c_driver max6650_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "max6650", }, - .attach_adapter = max6650_attach_adapter, - .detach_client = max6650_detach_client, + .probe = max6650_probe, + .remove = max6650_remove, + .id_table = max6650_id, + .detect = max6650_detect, + .address_data = &addr_data, }; /* @@ -128,7 +140,6 @@ static struct i2c_driver max6650_driver = { struct max6650_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -437,47 +448,21 @@ static struct attribute_group max6650_attr_grp = { * Real code */ -static int max6650_attach_adapter(struct i2c_adapter *adapter) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int max6650_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) { - dev_dbg(&adapter->dev, - "FATAL: max6650_attach_adapter class HWMON not set\n"); - return 0; - } - - return i2c_probe(adapter, &addr_data, max6650_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ - -static int max6650_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client; - struct max6650_data *data; - int err = -ENODEV; + struct i2c_adapter *adapter = client->adapter; + int address = client->addr; dev_dbg(&adapter->dev, "max6650_detect called, kind = %d\n", kind); if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { dev_dbg(&adapter->dev, "max6650: I2C bus doesn't support " "byte read mode, skipping.\n"); - return 0; - } - - if (!(data = kzalloc(sizeof(struct max6650_data), GFP_KERNEL))) { - dev_err(&adapter->dev, "max6650: out of memory.\n"); - return -ENOMEM; + return -ENODEV; } - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &max6650_driver; - /* * Now we do the remaining detection. A negative kind means that * the driver was loaded with no force parameter (default), so we @@ -501,28 +486,40 @@ static int max6650_detect(struct i2c_adapter *adapter, int address, int kind) ||(i2c_smbus_read_byte_data(client, MAX6650_REG_COUNT) & 0xFC))) { dev_dbg(&adapter->dev, "max6650: detection failed at 0x%02x.\n", address); - goto err_free; + return -ENODEV; } dev_info(&adapter->dev, "max6650: chip found at 0x%02x.\n", address); - strlcpy(client->name, "max6650", I2C_NAME_SIZE); - mutex_init(&data->update_lock); + strlcpy(info->type, "max6650", I2C_NAME_SIZE); - if ((err = i2c_attach_client(client))) { - dev_err(&adapter->dev, "max6650: failed to attach client.\n"); - goto err_free; + return 0; +} + +static int max6650_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max6650_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct max6650_data), GFP_KERNEL))) { + dev_err(&client->dev, "out of memory.\n"); + return -ENOMEM; } + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + /* * Initialize the max6650 chip */ - if (max6650_init_client(client)) - goto err_detach; + err = max6650_init_client(client); + if (err) + goto err_free; err = sysfs_create_group(&client->dev.kobj, &max6650_attr_grp); if (err) - goto err_detach; + goto err_free; data->hwmon_dev = hwmon_device_register(&client->dev); if (!IS_ERR(data->hwmon_dev)) @@ -531,24 +528,19 @@ static int max6650_detect(struct i2c_adapter *adapter, int address, int kind) err = PTR_ERR(data->hwmon_dev); dev_err(&client->dev, "error registering hwmon device.\n"); sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp); -err_detach: - i2c_detach_client(client); err_free: kfree(data); return err; } -static int max6650_detach_client(struct i2c_client *client) +static int max6650_remove(struct i2c_client *client) { struct max6650_data *data = i2c_get_clientdata(client); - int err; sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp); hwmon_device_unregister(data->hwmon_dev); - err = i2c_detach_client(client); - if (!err) - kfree(data); - return err; + kfree(data); + return 0; } static int max6650_init_client(struct i2c_client *client) -- cgit v1.2.3 From 8fb597bb6ec80d53836229bf3576c7b848b909e3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:16 +0200 Subject: hwmon: (smsc47m192) Convert to a new-style i2c driver The new-style smsc47m192 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Hartmut Rick --- drivers/hwmon/smsc47m192.c | 102 ++++++++++++++++++++------------------------- 1 file changed, 46 insertions(+), 56 deletions(-) diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c index 3c9db6598ba7..8bb5cb532d4d 100644 --- a/drivers/hwmon/smsc47m192.c +++ b/drivers/hwmon/smsc47m192.c @@ -96,7 +96,6 @@ static inline int TEMP_FROM_REG(s8 val) } struct smsc47m192_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ @@ -114,18 +113,29 @@ struct smsc47m192_data { u8 vrm; }; -static int smsc47m192_attach_adapter(struct i2c_adapter *adapter); -static int smsc47m192_detect(struct i2c_adapter *adapter, int address, - int kind); -static int smsc47m192_detach_client(struct i2c_client *client); +static int smsc47m192_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int smsc47m192_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int smsc47m192_remove(struct i2c_client *client); static struct smsc47m192_data *smsc47m192_update_device(struct device *dev); +static const struct i2c_device_id smsc47m192_id[] = { + { "smsc47m192", smsc47m192 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, smsc47m192_id); + static struct i2c_driver smsc47m192_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "smsc47m192", }, - .attach_adapter = smsc47m192_attach_adapter, - .detach_client = smsc47m192_detach_client, + .probe = smsc47m192_probe, + .remove = smsc47m192_remove, + .id_table = smsc47m192_id, + .detect = smsc47m192_detect, + .address_data = &addr_data, }; /* Voltages */ @@ -440,17 +450,6 @@ static const struct attribute_group smsc47m192_group_in4 = { .attrs = smsc47m192_attributes_in4, }; -/* This function is called when: - * smsc47m192_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and smsc47m192_driver is still present) */ -static int smsc47m192_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, smsc47m192_detect); -} - static void smsc47m192_init_client(struct i2c_client *client) { int i; @@ -481,31 +480,15 @@ static void smsc47m192_init_client(struct i2c_client *client) } } -/* This function is called by i2c_probe */ -static int smsc47m192_detect(struct i2c_adapter *adapter, int address, - int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int smsc47m192_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct smsc47m192_data *data; - int err = 0; - int version, config; + struct i2c_adapter *adapter = client->adapter; + int version; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct smsc47m192_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &smsc47m192_driver; - - if (kind == 0) - kind = smsc47m192; + return -ENODEV; /* Detection criteria from sensors_detect script */ if (kind < 0) { @@ -523,26 +506,39 @@ static int smsc47m192_detect(struct i2c_adapter *adapter, int address, } else { dev_dbg(&adapter->dev, "SMSC47M192 detection failed at 0x%02x\n", - address); - goto exit_free; + client->addr); + return -ENODEV; } } - /* Fill in the remaining client fields and put into the global list */ - strlcpy(client->name, "smsc47m192", I2C_NAME_SIZE); + strlcpy(info->type, "smsc47m192", I2C_NAME_SIZE); + + return 0; +} + +static int smsc47m192_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct smsc47m192_data *data; + int config; + int err; + + data = kzalloc(sizeof(struct smsc47m192_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); data->vrm = vid_which_vrm(); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; - /* Initialize the SMSC47M192 chip */ smsc47m192_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &smsc47m192_group))) - goto exit_detach; + goto exit_free; /* Pin 110 is either in4 (+12V) or VID4 */ config = i2c_smbus_read_byte_data(client, SMSC47M192_REG_CONFIG); @@ -563,26 +559,20 @@ static int smsc47m192_detect(struct i2c_adapter *adapter, int address, exit_remove_files: sysfs_remove_group(&client->dev.kobj, &smsc47m192_group); sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int smsc47m192_detach_client(struct i2c_client *client) +static int smsc47m192_remove(struct i2c_client *client) { struct smsc47m192_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &smsc47m192_group); sysfs_remove_group(&client->dev.kobj, &smsc47m192_group_in4); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; -- cgit v1.2.3 From ccf37488322429bf8709f2227f3d48466add2b6b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:16 +0200 Subject: hwmon: (thmc50) Convert to a new-style i2c driver The new-style thmc50 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Krzysztof Helt --- drivers/hwmon/thmc50.c | 107 ++++++++++++++++++++++++------------------------- 1 file changed, 53 insertions(+), 54 deletions(-) diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c index 76a3859c3fbe..3b01001108c1 100644 --- a/drivers/hwmon/thmc50.c +++ b/drivers/hwmon/thmc50.c @@ -60,7 +60,6 @@ static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B }; /* Each client has this additional data */ struct thmc50_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; @@ -77,17 +76,31 @@ struct thmc50_data { u8 alarms; }; -static int thmc50_attach_adapter(struct i2c_adapter *adapter); -static int thmc50_detach_client(struct i2c_client *client); +static int thmc50_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int thmc50_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int thmc50_remove(struct i2c_client *client); static void thmc50_init_client(struct i2c_client *client); static struct thmc50_data *thmc50_update_device(struct device *dev); +static const struct i2c_device_id thmc50_id[] = { + { "adm1022", adm1022 }, + { "thmc50", thmc50 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, thmc50_id); + static struct i2c_driver thmc50_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "thmc50", }, - .attach_adapter = thmc50_attach_adapter, - .detach_client = thmc50_detach_client, + .probe = thmc50_probe, + .remove = thmc50_remove, + .id_table = thmc50_id, + .detect = thmc50_detect, + .address_data = &addr_data, }; static ssize_t show_analog_out(struct device *dev, @@ -250,39 +263,23 @@ static const struct attribute_group temp3_group = { .attrs = temp3_attributes, }; -static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int thmc50_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { unsigned company; unsigned revision; unsigned config; - struct i2c_client *client; - struct thmc50_data *data; - struct device *dev; + struct i2c_adapter *adapter = client->adapter; int err = 0; const char *type_name; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { pr_debug("thmc50: detect failed, " "smbus byte data not supported!\n"); - goto exit; - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access thmc50 registers. */ - if (!(data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL))) { - pr_debug("thmc50: detect failed, kzalloc failed!\n"); - err = -ENOMEM; - goto exit; + return -ENODEV; } - client = &data->client; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &thmc50_driver; - dev = &client->dev; - pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n", client->addr, i2c_adapter_id(client->adapter)); @@ -307,21 +304,22 @@ static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind) } if (err == -ENODEV) { pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n"); - goto exit_free; + return err; } - data->type = kind; if (kind == adm1022) { int id = i2c_adapter_id(client->adapter); int i; type_name = "adm1022"; - data->has_temp3 = (config >> 7) & 1; /* config MSB */ for (i = 0; i + 1 < adm1022_temp3_num; i += 2) if (adm1022_temp3[i] == id && - adm1022_temp3[i + 1] == address) { + adm1022_temp3[i + 1] == client->addr) { /* enable 2nd remote temp */ - data->has_temp3 = 1; + config |= (1 << 7); + i2c_smbus_write_byte_data(client, + THMC50_REG_CONF, + config); break; } } else { @@ -330,19 +328,33 @@ static int thmc50_detect(struct i2c_adapter *adapter, int address, int kind) pr_debug("thmc50: Detected %s (version %x, revision %x)\n", type_name, (revision >> 4) - 0xc, revision & 0xf); - /* Fill in the remaining client fields & put it into the global list */ - strlcpy(client->name, type_name, I2C_NAME_SIZE); - mutex_init(&data->update_lock); + strlcpy(info->type, type_name, I2C_NAME_SIZE); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; + return 0; +} + +static int thmc50_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct thmc50_data *data; + int err; + + data = kzalloc(sizeof(struct thmc50_data), GFP_KERNEL); + if (!data) { + pr_debug("thmc50: detect failed, kzalloc failed!\n"); + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->type = id->driver_data; + mutex_init(&data->update_lock); thmc50_init_client(client); /* Register sysfs hooks */ if ((err = sysfs_create_group(&client->dev.kobj, &thmc50_group))) - goto exit_detach; + goto exit_free; /* Register ADM1022 sysfs hooks */ if (data->has_temp3) @@ -364,34 +376,21 @@ exit_remove_sysfs: sysfs_remove_group(&client->dev.kobj, &temp3_group); exit_remove_sysfs_thmc50: sysfs_remove_group(&client->dev.kobj, &thmc50_group); -exit_detach: - i2c_detach_client(client); exit_free: kfree(data); exit: return err; } -static int thmc50_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, thmc50_detect); -} - -static int thmc50_detach_client(struct i2c_client *client) +static int thmc50_remove(struct i2c_client *client) { struct thmc50_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &thmc50_group); if (data->has_temp3) sysfs_remove_group(&client->dev.kobj, &temp3_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; @@ -412,8 +411,8 @@ static void thmc50_init_client(struct i2c_client *client) } config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF); config |= 0x1; /* start the chip if it is in standby mode */ - if (data->has_temp3) - config |= 0x80; /* enable 2nd remote temp */ + if (data->type == adm1022 && (config & (1 << 7))) + data->has_temp3 = 1; i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config); } -- cgit v1.2.3 From cb0c1af37996f3016e34e9c709e5f727646f7207 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:17 +0200 Subject: hwmon: (w83791d) Convert to a new-style i2c driver The new-style w83791d driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Marc Hulsman --- drivers/hwmon/w83791d.c | 205 +++++++++++++++++------------------------------- 1 file changed, 71 insertions(+), 134 deletions(-) diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 85077c4c8039..e4e91c9d480a 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -247,7 +247,6 @@ static u8 div_to_reg(int nr, long val) } struct w83791d_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; @@ -286,9 +285,11 @@ struct w83791d_data { u8 vrm; /* hwmon-vid */ }; -static int w83791d_attach_adapter(struct i2c_adapter *adapter); -static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind); -static int w83791d_detach_client(struct i2c_client *client); +static int w83791d_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int w83791d_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int w83791d_remove(struct i2c_client *client); static int w83791d_read(struct i2c_client *client, u8 register); static int w83791d_write(struct i2c_client *client, u8 register, u8 value); @@ -300,12 +301,22 @@ static void w83791d_print_debug(struct w83791d_data *data, struct device *dev); static void w83791d_init_client(struct i2c_client *client); +static const struct i2c_device_id w83791d_id[] = { + { "w83791d", w83791d }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83791d_id); + static struct i2c_driver w83791d_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "w83791d", }, - .attach_adapter = w83791d_attach_adapter, - .detach_client = w83791d_detach_client, + .probe = w83791d_probe, + .remove = w83791d_remove, + .id_table = w83791d_id, + .detect = w83791d_detect, + .address_data = &addr_data, }; /* following are the sysfs callback functions */ @@ -905,49 +916,12 @@ static const struct attribute_group w83791d_group = { .attrs = w83791d_attributes, }; -/* This function is called when: - * w83791d_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and w83791d_driver is still present) */ -static int w83791d_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, w83791d_detect); -} - -static int w83791d_create_subclient(struct i2c_adapter *adapter, - struct i2c_client *client, int addr, - struct i2c_client **sub_cli) -{ - int err; - struct i2c_client *sub_client; - - (*sub_cli) = sub_client = - kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(sub_client)) { - return -ENOMEM; - } - sub_client->addr = 0x48 + addr; - i2c_set_clientdata(sub_client, NULL); - sub_client->adapter = adapter; - sub_client->driver = &w83791d_driver; - strlcpy(sub_client->name, "w83791d subclient", I2C_NAME_SIZE); - if ((err = i2c_attach_client(sub_client))) { - dev_err(&client->dev, "subclient registration " - "at address 0x%x failed\n", sub_client->addr); - kfree(sub_client); - return err; - } - return 0; -} - - -static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address, - int kind, struct i2c_client *client) +static int w83791d_detect_subclients(struct i2c_client *client) { + struct i2c_adapter *adapter = client->adapter; struct w83791d_data *data = i2c_get_clientdata(client); + int address = client->addr; int i, id, err; u8 val; @@ -971,10 +945,7 @@ static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address, val = w83791d_read(client, W83791D_REG_I2C_SUBADDR); if (!(val & 0x08)) { - err = w83791d_create_subclient(adapter, client, - val & 0x7, &data->lm75[0]); - if (err < 0) - goto error_sc_0; + data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7)); } if (!(val & 0x80)) { if ((data->lm75[0] != NULL) && @@ -986,10 +957,8 @@ static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address, err = -ENODEV; goto error_sc_1; } - err = w83791d_create_subclient(adapter, client, - (val >> 4) & 0x7, &data->lm75[1]); - if (err < 0) - goto error_sc_1; + data->lm75[1] = i2c_new_dummy(adapter, + 0x48 + ((val >> 4) & 0x7)); } return 0; @@ -997,53 +966,31 @@ static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address, /* Undo inits in case of errors */ error_sc_1: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); error_sc_0: return err; } -static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int w83791d_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - struct i2c_client *client; - struct device *dev; - struct w83791d_data *data; - int i, val1, val2; - int err = 0; - const char *client_name = ""; + struct i2c_adapter *adapter = client->adapter; + int val1, val2; + unsigned short address = client->addr; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - goto error0; + return -ENODEV; } - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access w83791d_{read,write}_value. */ - if (!(data = kzalloc(sizeof(struct w83791d_data), GFP_KERNEL))) { - err = -ENOMEM; - goto error0; - } - - client = &data->client; - dev = &client->dev; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &w83791d_driver; - mutex_init(&data->update_lock); - - /* Now, we do the remaining detection. */ - /* The w83791d may be stuck in some other bank than bank 0. This may make reading other information impossible. Specify a force=... parameter, and the Winbond will be reset to the right bank. */ if (kind < 0) { if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) { - dev_dbg(dev, "Detection failed at step 1\n"); - goto error1; + return -ENODEV; } val1 = w83791d_read(client, W83791D_REG_BANK); val2 = w83791d_read(client, W83791D_REG_CHIPMAN); @@ -1052,15 +999,13 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind) /* yes it is Bank0 */ if (((!(val1 & 0x80)) && (val2 != 0xa3)) || ((val1 & 0x80) && (val2 != 0x5c))) { - dev_dbg(dev, "Detection failed at step 2\n"); - goto error1; + return -ENODEV; } } /* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR should match */ if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) { - dev_dbg(dev, "Detection failed at step 3\n"); - goto error1; + return -ENODEV; } } @@ -1075,30 +1020,33 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind) /* get vendor ID */ val2 = w83791d_read(client, W83791D_REG_CHIPMAN); if (val2 != 0x5c) { /* the vendor is NOT Winbond */ - dev_dbg(dev, "Detection failed at step 4\n"); - goto error1; + return -ENODEV; } val1 = w83791d_read(client, W83791D_REG_WCHIPID); if (val1 == 0x71) { kind = w83791d; } else { if (kind == 0) - dev_warn(dev, + dev_warn(&adapter->dev, "w83791d: Ignoring 'force' parameter " "for unknown chip at adapter %d, " "address 0x%02x\n", i2c_adapter_id(adapter), address); - goto error1; + return -ENODEV; } } - if (kind == w83791d) { - client_name = "w83791d"; - } else { - dev_err(dev, "w83791d: Internal error: unknown kind (%d)?!?\n", - kind); - goto error1; - } + strlcpy(info->type, "w83791d", I2C_NAME_SIZE); + + return 0; +} + +static int w83791d_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct w83791d_data *data; + struct device *dev = &client->dev; + int i, val1, err; #ifdef DEBUG val1 = w83791d_read(client, W83791D_REG_DID_VID4); @@ -1106,15 +1054,18 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind) (val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1); #endif - /* Fill in the remaining client fields and put into the global list */ - strlcpy(client->name, client_name, I2C_NAME_SIZE); + data = kzalloc(sizeof(struct w83791d_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto error0; + } - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto error1; + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); - if ((err = w83791d_detect_subclients(adapter, address, kind, client))) - goto error2; + err = w83791d_detect_subclients(client); + if (err) + goto error1; /* Initialize the chip */ w83791d_init_client(client); @@ -1141,43 +1092,29 @@ static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind) error4: sysfs_remove_group(&client->dev.kobj, &w83791d_group); error3: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } - if (data->lm75[1] != NULL) { - i2c_detach_client(data->lm75[1]); - kfree(data->lm75[1]); - } -error2: - i2c_detach_client(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); error1: kfree(data); error0: return err; } -static int w83791d_detach_client(struct i2c_client *client) +static int w83791d_remove(struct i2c_client *client) { struct w83791d_data *data = i2c_get_clientdata(client); - int err; - - /* main client */ - if (data) { - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &w83791d_group); - } - if ((err = i2c_detach_client(client))) - return err; + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &w83791d_group); - /* main client */ - if (data) - kfree(data); - /* subclient */ - else - kfree(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); + kfree(data); return 0; } -- cgit v1.2.3 From 31d5d275a118527a2b9b0f68613428f176efbb8f Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:17 +0200 Subject: hwmon: (w83792d) Convert to a new-style i2c driver The new-style w83792d driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/w83792d.c | 214 ++++++++++++++++-------------------------------- 1 file changed, 72 insertions(+), 142 deletions(-) diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 299629d47ed6..cf94c5b0c879 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -267,9 +267,7 @@ DIV_TO_REG(long val) } struct w83792d_data { - struct i2c_client client; struct device *hwmon_dev; - enum chips type; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ @@ -299,9 +297,11 @@ struct w83792d_data { u8 sf2_levels[3][4]; /* Smart FanII: Fan1,2,3 duty cycle levels */ }; -static int w83792d_attach_adapter(struct i2c_adapter *adapter); -static int w83792d_detect(struct i2c_adapter *adapter, int address, int kind); -static int w83792d_detach_client(struct i2c_client *client); +static int w83792d_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int w83792d_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int w83792d_remove(struct i2c_client *client); static struct w83792d_data *w83792d_update_device(struct device *dev); #ifdef DEBUG @@ -310,12 +310,22 @@ static void w83792d_print_debug(struct w83792d_data *data, struct device *dev); static void w83792d_init_client(struct i2c_client *client); +static const struct i2c_device_id w83792d_id[] = { + { "w83792d", w83792d }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83792d_id); + static struct i2c_driver w83792d_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "w83792d", }, - .attach_adapter = w83792d_attach_adapter, - .detach_client = w83792d_detach_client, + .probe = w83792d_probe, + .remove = w83792d_remove, + .id_table = w83792d_id, + .detect = w83792d_detect, + .address_data = &addr_data, }; static inline long in_count_from_reg(int nr, struct w83792d_data *data) @@ -864,53 +874,14 @@ store_sf2_level(struct device *dev, struct device_attribute *attr, return count; } -/* This function is called when: - * w83792d_driver is inserted (when this module is loaded), for each - available adapter - * when a new adapter is inserted (and w83792d_driver is still present) */ -static int -w83792d_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, w83792d_detect); -} - - -static int -w83792d_create_subclient(struct i2c_adapter *adapter, - struct i2c_client *new_client, int addr, - struct i2c_client **sub_cli) -{ - int err; - struct i2c_client *sub_client; - - (*sub_cli) = sub_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(sub_client)) { - return -ENOMEM; - } - sub_client->addr = 0x48 + addr; - i2c_set_clientdata(sub_client, NULL); - sub_client->adapter = adapter; - sub_client->driver = &w83792d_driver; - sub_client->flags = 0; - strlcpy(sub_client->name, "w83792d subclient", I2C_NAME_SIZE); - if ((err = i2c_attach_client(sub_client))) { - dev_err(&new_client->dev, "subclient registration " - "at address 0x%x failed\n", sub_client->addr); - kfree(sub_client); - return err; - } - return 0; -} - static int -w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, - struct i2c_client *new_client) +w83792d_detect_subclients(struct i2c_client *new_client) { int i, id, err; + int address = new_client->addr; u8 val; + struct i2c_adapter *adapter = new_client->adapter; struct w83792d_data *data = i2c_get_clientdata(new_client); id = i2c_adapter_id(adapter); @@ -932,10 +903,7 @@ w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, val = w83792d_read_value(new_client, W83792D_REG_I2C_SUBADDR); if (!(val & 0x08)) { - err = w83792d_create_subclient(adapter, new_client, val & 0x7, - &data->lm75[0]); - if (err < 0) - goto ERROR_SC_0; + data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (val & 0x7)); } if (!(val & 0x80)) { if ((data->lm75[0] != NULL) && @@ -945,10 +913,8 @@ w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, err = -ENODEV; goto ERROR_SC_1; } - err = w83792d_create_subclient(adapter, new_client, - (val >> 4) & 0x7, &data->lm75[1]); - if (err < 0) - goto ERROR_SC_1; + data->lm75[1] = i2c_new_dummy(adapter, + 0x48 + ((val >> 4) & 0x7)); } return 0; @@ -956,10 +922,8 @@ w83792d_detect_subclients(struct i2c_adapter *adapter, int address, int kind, /* Undo inits in case of errors */ ERROR_SC_1: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); ERROR_SC_0: return err; } @@ -1294,47 +1258,25 @@ static const struct attribute_group w83792d_group = { .attrs = w83792d_attributes, }; +/* Return 0 if detection is successful, -ENODEV otherwise */ static int -w83792d_detect(struct i2c_adapter *adapter, int address, int kind) +w83792d_detect(struct i2c_client *client, int kind, struct i2c_board_info *info) { - int i = 0, val1 = 0, val2; - struct i2c_client *client; - struct device *dev; - struct w83792d_data *data; - int err = 0; - const char *client_name = ""; + struct i2c_adapter *adapter = client->adapter; + int val1, val2; + unsigned short address = client->addr; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - goto ERROR0; - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access w83792d_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL))) { - err = -ENOMEM; - goto ERROR0; + return -ENODEV; } - client = &data->client; - dev = &client->dev; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &w83792d_driver; - client->flags = 0; - - /* Now, we do the remaining detection. */ - /* The w83792d may be stuck in some other bank than bank 0. This may make reading other information impossible. Specify a force=... or force_*=... parameter, and the Winbond will be reset to the right bank. */ if (kind < 0) { if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) { - dev_dbg(dev, "Detection failed at step 1\n"); - goto ERROR1; + return -ENODEV; } val1 = w83792d_read_value(client, W83792D_REG_BANK); val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); @@ -1342,16 +1284,14 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) if (!(val1 & 0x07)) { /* is Bank0 */ if (((!(val1 & 0x80)) && (val2 != 0xa3)) || ((val1 & 0x80) && (val2 != 0x5c))) { - dev_dbg(dev, "Detection failed at step 2\n"); - goto ERROR1; + return -ENODEV; } } /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR should match */ if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address) { - dev_dbg(dev, "Detection failed at step 3\n"); - goto ERROR1; + return -ENODEV; } } @@ -1367,45 +1307,48 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind) /* get vendor ID */ val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN); if (val2 != 0x5c) { /* the vendor is NOT Winbond */ - goto ERROR1; + return -ENODEV; } val1 = w83792d_read_value(client, W83792D_REG_WCHIPID); if (val1 == 0x7a) { kind = w83792d; } else { if (kind == 0) - dev_warn(dev, + dev_warn(&adapter->dev, "w83792d: Ignoring 'force' parameter for" " unknown chip at adapter %d, address" " 0x%02x\n", i2c_adapter_id(adapter), address); - goto ERROR1; + return -ENODEV; } } - if (kind == w83792d) { - client_name = "w83792d"; - } else { - dev_err(dev, "w83792d: Internal error: unknown kind (%d)?!?\n", - kind); - goto ERROR1; - } + strlcpy(info->type, "w83792d", I2C_NAME_SIZE); + + return 0; +} + +static int +w83792d_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct w83792d_data *data; + struct device *dev = &client->dev; + int i, val1, err; - /* Fill in the remaining client fields and put into the global list */ - strlcpy(client->name, client_name, I2C_NAME_SIZE); - data->type = kind; + data = kzalloc(sizeof(struct w83792d_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto ERROR0; + } + i2c_set_clientdata(client, data); data->valid = 0; mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) + err = w83792d_detect_subclients(client); + if (err) goto ERROR1; - if ((err = w83792d_detect_subclients(adapter, address, - kind, client))) - goto ERROR2; - /* Initialize the chip */ w83792d_init_client(client); @@ -1457,16 +1400,10 @@ exit_remove_files: for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++) sysfs_remove_group(&dev->kobj, &w83792d_group_fan[i]); ERROR3: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } - if (data->lm75[1] != NULL) { - i2c_detach_client(data->lm75[1]); - kfree(data->lm75[1]); - } -ERROR2: - i2c_detach_client(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); ERROR1: kfree(data); ERROR0: @@ -1474,30 +1411,23 @@ ERROR0: } static int -w83792d_detach_client(struct i2c_client *client) +w83792d_remove(struct i2c_client *client) { struct w83792d_data *data = i2c_get_clientdata(client); - int err, i; - - /* main client */ - if (data) { - hwmon_device_unregister(data->hwmon_dev); - sysfs_remove_group(&client->dev.kobj, &w83792d_group); - for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++) - sysfs_remove_group(&client->dev.kobj, - &w83792d_group_fan[i]); - } + int i; - if ((err = i2c_detach_client(client))) - return err; + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &w83792d_group); + for (i = 0; i < ARRAY_SIZE(w83792d_group_fan); i++) + sysfs_remove_group(&client->dev.kobj, + &w83792d_group_fan[i]); - /* main client */ - if (data) - kfree(data); - /* subclient */ - else - kfree(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); + kfree(data); return 0; } -- cgit v1.2.3 From a7f13a6ec40379fe2116c647ac8e569227ba8d4f Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:17 +0200 Subject: hwmon: (w83793) Convert to a new-style i2c driver The new-style w83793 driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/w83793.c | 227 ++++++++++++++++++++----------------------------- 1 file changed, 90 insertions(+), 137 deletions(-) diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index ed3c019b78c7..0a739f1c69be 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -179,7 +179,6 @@ static inline s8 TEMP_TO_REG(long val, s8 min, s8 max) } struct w83793_data { - struct i2c_client client; struct i2c_client *lm75[2]; struct device *hwmon_dev; struct mutex update_lock; @@ -226,19 +225,31 @@ struct w83793_data { static u8 w83793_read_value(struct i2c_client *client, u16 reg); static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value); -static int w83793_attach_adapter(struct i2c_adapter *adapter); -static int w83793_detect(struct i2c_adapter *adapter, int address, int kind); -static int w83793_detach_client(struct i2c_client *client); +static int w83793_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int w83793_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int w83793_remove(struct i2c_client *client); static void w83793_init_client(struct i2c_client *client); static void w83793_update_nonvolatile(struct device *dev); static struct w83793_data *w83793_update_device(struct device *dev); +static const struct i2c_device_id w83793_id[] = { + { "w83793", w83793 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83793_id); + static struct i2c_driver w83793_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "w83793", }, - .attach_adapter = w83793_attach_adapter, - .detach_client = w83793_detach_client, + .probe = w83793_probe, + .remove = w83793_remove, + .id_table = w83793_id, + .detect = w83793_detect, + .address_data = &addr_data, }; static ssize_t @@ -1053,89 +1064,51 @@ static void w83793_init_client(struct i2c_client *client) } -static int w83793_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, w83793_detect); -} - -static int w83793_detach_client(struct i2c_client *client) +static int w83793_remove(struct i2c_client *client) { struct w83793_data *data = i2c_get_clientdata(client); struct device *dev = &client->dev; - int err, i; + int i; - /* main client */ - if (data) { - hwmon_device_unregister(data->hwmon_dev); + hwmon_device_unregister(data->hwmon_dev); - for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) - device_remove_file(dev, - &w83793_sensor_attr_2[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) + device_remove_file(dev, + &w83793_sensor_attr_2[i].dev_attr); - for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) - device_remove_file(dev, &sda_single_files[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) + device_remove_file(dev, &sda_single_files[i].dev_attr); - for (i = 0; i < ARRAY_SIZE(w83793_vid); i++) - device_remove_file(dev, &w83793_vid[i].dev_attr); - device_remove_file(dev, &dev_attr_vrm); + for (i = 0; i < ARRAY_SIZE(w83793_vid); i++) + device_remove_file(dev, &w83793_vid[i].dev_attr); + device_remove_file(dev, &dev_attr_vrm); - for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++) - device_remove_file(dev, &w83793_left_fan[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++) + device_remove_file(dev, &w83793_left_fan[i].dev_attr); - for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++) - device_remove_file(dev, &w83793_left_pwm[i].dev_attr); + for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++) + device_remove_file(dev, &w83793_left_pwm[i].dev_attr); - for (i = 0; i < ARRAY_SIZE(w83793_temp); i++) - device_remove_file(dev, &w83793_temp[i].dev_attr); - } + for (i = 0; i < ARRAY_SIZE(w83793_temp); i++) + device_remove_file(dev, &w83793_temp[i].dev_attr); - if ((err = i2c_detach_client(client))) - return err; + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); - /* main client */ - if (data) - kfree(data); - /* subclient */ - else - kfree(client); + kfree(data); return 0; } static int -w83793_create_subclient(struct i2c_adapter *adapter, - struct i2c_client *client, int addr, - struct i2c_client **sub_cli) -{ - int err = 0; - struct i2c_client *sub_client; - - (*sub_cli) = sub_client = - kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (!(sub_client)) { - return -ENOMEM; - } - sub_client->addr = 0x48 + addr; - i2c_set_clientdata(sub_client, NULL); - sub_client->adapter = adapter; - sub_client->driver = &w83793_driver; - strlcpy(sub_client->name, "w83793 subclient", I2C_NAME_SIZE); - if ((err = i2c_attach_client(sub_client))) { - dev_err(&client->dev, "subclient registration " - "at address 0x%x failed\n", sub_client->addr); - kfree(sub_client); - } - return err; -} - -static int -w83793_detect_subclients(struct i2c_adapter *adapter, int address, - int kind, struct i2c_client *client) +w83793_detect_subclients(struct i2c_client *client) { int i, id, err; + int address = client->addr; u8 tmp; + struct i2c_adapter *adapter = client->adapter; struct w83793_data *data = i2c_get_clientdata(client); id = i2c_adapter_id(adapter); @@ -1158,11 +1131,7 @@ w83793_detect_subclients(struct i2c_adapter *adapter, int address, tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR); if (!(tmp & 0x08)) { - err = - w83793_create_subclient(adapter, client, tmp & 0x7, - &data->lm75[0]); - if (err < 0) - goto ERROR_SC_0; + data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (tmp & 0x7)); } if (!(tmp & 0x80)) { if ((data->lm75[0] != NULL) @@ -1173,10 +1142,8 @@ w83793_detect_subclients(struct i2c_adapter *adapter, int address, err = -ENODEV; goto ERROR_SC_1; } - err = w83793_create_subclient(adapter, client, - (tmp >> 4) & 0x7, &data->lm75[1]); - if (err < 0) - goto ERROR_SC_1; + data->lm75[1] = i2c_new_dummy(adapter, + 0x48 + ((tmp >> 4) & 0x7)); } return 0; @@ -1184,69 +1151,44 @@ w83793_detect_subclients(struct i2c_adapter *adapter, int address, /* Undo inits in case of errors */ ERROR_SC_1: - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); ERROR_SC_0: return err; } -static int w83793_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int w83793_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - int i; - u8 tmp, val; - struct i2c_client *client; - struct device *dev; - struct w83793_data *data; - int files_fan = ARRAY_SIZE(w83793_left_fan) / 7; - int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5; - int files_temp = ARRAY_SIZE(w83793_temp) / 6; - int err = 0; + u8 tmp, bank; + struct i2c_adapter *adapter = client->adapter; + unsigned short address = client->addr; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - goto exit; + return -ENODEV; } - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access w83793_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct w83793_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - client = &data->client; - dev = &client->dev; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &w83793_driver; + bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL); - data->bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL); - - /* Now, we do the remaining detection. */ if (kind < 0) { - tmp = data->bank & 0x80 ? 0x5c : 0xa3; + tmp = bank & 0x80 ? 0x5c : 0xa3; /* Check Winbond vendor ID */ if (tmp != i2c_smbus_read_byte_data(client, W83793_REG_VENDORID)) { pr_debug("w83793: Detection failed at check " "vendor id\n"); - err = -ENODEV; - goto free_mem; + return -ENODEV; } /* If Winbond chip, address of chip and W83793_REG_I2C_ADDR should match */ - if ((data->bank & 0x07) == 0 + if ((bank & 0x07) == 0 && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) != (address << 1)) { pr_debug("w83793: Detection failed at check " "i2c addr\n"); - err = -ENODEV; - goto free_mem; + return -ENODEV; } } @@ -1255,30 +1197,47 @@ static int w83793_detect(struct i2c_adapter *adapter, int address, int kind) Winbond. Determine the chip type now */ if (kind <= 0) { - if (0x7b == w83793_read_value(client, W83793_REG_CHIPID)) { + if (0x7b == i2c_smbus_read_byte_data(client, + W83793_REG_CHIPID)) { kind = w83793; } else { if (kind == 0) dev_warn(&adapter->dev, "w83793: Ignoring " "'force' parameter for unknown chip " "at address 0x%02x\n", address); - err = -ENODEV; - goto free_mem; + return -ENODEV; } } - /* Fill in the remaining client fields and put into the global list */ - strlcpy(client->name, "w83793", I2C_NAME_SIZE); + strlcpy(info->type, "w83793", I2C_NAME_SIZE); + + return 0; +} +static int w83793_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct w83793_data *data; + int i, tmp, val, err; + int files_fan = ARRAY_SIZE(w83793_left_fan) / 7; + int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5; + int files_temp = ARRAY_SIZE(w83793_temp) / 6; + + data = kzalloc(sizeof(struct w83793_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL); mutex_init(&data->update_lock); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) + err = w83793_detect_subclients(client); + if (err) goto free_mem; - if ((err = w83793_detect_subclients(adapter, address, kind, client))) - goto detach_client; - /* Initialize the chip */ w83793_init_client(client); @@ -1459,16 +1418,10 @@ exit_remove: for (i = 0; i < ARRAY_SIZE(w83793_temp); i++) device_remove_file(dev, &w83793_temp[i].dev_attr); - if (data->lm75[0] != NULL) { - i2c_detach_client(data->lm75[0]); - kfree(data->lm75[0]); - } - if (data->lm75[1] != NULL) { - i2c_detach_client(data->lm75[1]); - kfree(data->lm75[1]); - } -detach_client: - i2c_detach_client(client); + if (data->lm75[0] != NULL) + i2c_unregister_device(data->lm75[0]); + if (data->lm75[1] != NULL) + i2c_unregister_device(data->lm75[1]); free_mem: kfree(data); exit: -- cgit v1.2.3 From dc18a4184d6794e2e5c6f05142f3f8aaeeaee506 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:18 +0200 Subject: hwmon: (w83l785ts) Convert to a new-style i2c driver The new-style w83l785ts driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare --- drivers/hwmon/w83l785ts.c | 117 ++++++++++++++++++++++++---------------------- 1 file changed, 60 insertions(+), 57 deletions(-) diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index 52e268e25dab..ea295b9fc4f4 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -81,10 +81,11 @@ I2C_CLIENT_INSMOD_1(w83l785ts); * Functions declaration */ -static int w83l785ts_attach_adapter(struct i2c_adapter *adapter); -static int w83l785ts_detect(struct i2c_adapter *adapter, int address, - int kind); -static int w83l785ts_detach_client(struct i2c_client *client); +static int w83l785ts_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int w83l785ts_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int w83l785ts_remove(struct i2c_client *client); static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval); static struct w83l785ts_data *w83l785ts_update_device(struct device *dev); @@ -92,12 +93,22 @@ static struct w83l785ts_data *w83l785ts_update_device(struct device *dev); * Driver data (common to all clients) */ +static const struct i2c_device_id w83l785ts_id[] = { + { "w83l785ts", w83l785ts }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83l785ts_id); + static struct i2c_driver w83l785ts_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "w83l785ts", }, - .attach_adapter = w83l785ts_attach_adapter, - .detach_client = w83l785ts_detach_client, + .probe = w83l785ts_probe, + .remove = w83l785ts_remove, + .id_table = w83l785ts_id, + .detect = w83l785ts_detect, + .address_data = &addr_data, }; /* @@ -105,7 +116,6 @@ static struct i2c_driver w83l785ts_driver = { */ struct w83l785ts_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* zero until following fields are valid */ @@ -135,40 +145,14 @@ static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1); * Real code */ -static int w83l785ts_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, w83l785ts_detect); -} - -/* - * The following function does more than just detection. If detection - * succeeds, it also registers the new chip. - */ -static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int w83l785ts_detect(struct i2c_client *new_client, int kind, + struct i2c_board_info *info) { - struct i2c_client *new_client; - struct w83l785ts_data *data; - int err = 0; - + struct i2c_adapter *adapter = new_client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - if (!(data = kzalloc(sizeof(struct w83l785ts_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* The common I2C client data is placed right before the - * W83L785TS-specific data. */ - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &w83l785ts_driver; - new_client->flags = 0; + return -ENODEV; /* * Now we do the remaining detection. A negative kind means that @@ -188,8 +172,8 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) { dev_dbg(&adapter->dev, "W83L785TS-S detection failed at 0x%02x.\n", - address); - goto exit_free; + new_client->addr); + return -ENODEV; } } @@ -214,22 +198,34 @@ static int w83l785ts_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Unsupported chip (man_id=0x%04X, " "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } - /* We can fill in the remaining client fields. */ - strlcpy(new_client->name, "w83l785ts", I2C_NAME_SIZE); + strlcpy(info->type, "w83l785ts", I2C_NAME_SIZE); + + return 0; +} + +static int w83l785ts_probe(struct i2c_client *new_client, + const struct i2c_device_id *id) +{ + struct w83l785ts_data *data; + int err = 0; + + data = kzalloc(sizeof(struct w83l785ts_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(new_client, data); data->valid = 0; mutex_init(&data->update_lock); /* Default values in case the first read fails (unlikely). */ data->temp[1] = data->temp[0] = 0; - /* Tell the I2C layer a new client has arrived. */ - if ((err = i2c_attach_client(new_client))) - goto exit_free; - /* * Initialize the W83L785TS chip * Nothing yet, assume it is already started. @@ -259,25 +255,20 @@ exit_remove: &sensor_dev_attr_temp1_input.dev_attr); device_remove_file(&new_client->dev, &sensor_dev_attr_temp1_max.dev_attr); - i2c_detach_client(new_client); -exit_free: kfree(data); exit: return err; } -static int w83l785ts_detach_client(struct i2c_client *client) +static int w83l785ts_remove(struct i2c_client *client) { struct w83l785ts_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); device_remove_file(&client->dev, &sensor_dev_attr_temp1_input.dev_attr); device_remove_file(&client->dev, &sensor_dev_attr_temp1_max.dev_attr); - if ((err = i2c_detach_client(client))) - return err; kfree(data); return 0; @@ -286,6 +277,18 @@ static int w83l785ts_detach_client(struct i2c_client *client) static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval) { int value, i; + struct device *dev; + const char *prefix; + + /* We might be called during detection, at which point the client + isn't yet fully initialized, so we can't use dev_dbg on it */ + if (i2c_get_clientdata(client)) { + dev = &client->dev; + prefix = ""; + } else { + dev = &client->adapter->dev; + prefix = "w83l785ts: "; + } /* Frequent read errors have been reported on Asus boards, so we * retry on read errors. If it still fails (unlikely), return the @@ -293,15 +296,15 @@ static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval) for (i = 1; i <= MAX_RETRIES; i++) { value = i2c_smbus_read_byte_data(client, reg); if (value >= 0) { - dev_dbg(&client->dev, "Read 0x%02x from register " - "0x%02x.\n", value, reg); + dev_dbg(dev, "%sRead 0x%02x from register 0x%02x.\n", + prefix, value, reg); return value; } - dev_dbg(&client->dev, "Read failed, will retry in %d.\n", i); + dev_dbg(dev, "%sRead failed, will retry in %d.\n", prefix, i); msleep(i); } - dev_err(&client->dev, "Couldn't read value from register 0x%02x.\n", + dev_err(dev, "%sCouldn't read value from register 0x%02x.\n", prefix, reg); return defval; } -- cgit v1.2.3 From 33468e7637c53b5516902422d66ca3d3fe64a9c3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Jul 2008 19:30:18 +0200 Subject: hwmon: (w83l786ng) Convert to a new-style i2c driver The new-style w83l786ng driver implements the optional detect() callback to cover the use cases of the legacy driver. Signed-off-by: Jean Delvare Cc: Kevin Lo --- drivers/hwmon/w83l786ng.c | 98 ++++++++++++++++++++++------------------------- 1 file changed, 45 insertions(+), 53 deletions(-) diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c index 41e22ddb568a..badca769f350 100644 --- a/drivers/hwmon/w83l786ng.c +++ b/drivers/hwmon/w83l786ng.c @@ -121,7 +121,6 @@ DIV_TO_REG(long val) } struct w83l786ng_data { - struct i2c_client client; struct device *hwmon_dev; struct mutex update_lock; char valid; /* !=0 if following fields are valid */ @@ -146,18 +145,30 @@ struct w83l786ng_data { u8 tolerance[2]; }; -static int w83l786ng_attach_adapter(struct i2c_adapter *adapter); -static int w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind); -static int w83l786ng_detach_client(struct i2c_client *client); +static int w83l786ng_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int w83l786ng_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info); +static int w83l786ng_remove(struct i2c_client *client); static void w83l786ng_init_client(struct i2c_client *client); static struct w83l786ng_data *w83l786ng_update_device(struct device *dev); +static const struct i2c_device_id w83l786ng_id[] = { + { "w83l786ng", w83l786ng }, + { } +}; +MODULE_DEVICE_TABLE(i2c, w83l786ng_id); + static struct i2c_driver w83l786ng_driver = { + .class = I2C_CLASS_HWMON, .driver = { .name = "w83l786ng", }, - .attach_adapter = w83l786ng_attach_adapter, - .detach_client = w83l786ng_detach_client, + .probe = w83l786ng_probe, + .remove = w83l786ng_remove, + .id_table = w83l786ng_id, + .detect = w83l786ng_detect, + .address_data = &addr_data, }; static u8 @@ -575,42 +586,15 @@ static const struct attribute_group w83l786ng_group = { }; static int -w83l786ng_attach_adapter(struct i2c_adapter *adapter) +w83l786ng_detect(struct i2c_client *client, int kind, + struct i2c_board_info *info) { - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_probe(adapter, &addr_data, w83l786ng_detect); -} - -static int -w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client; - struct device *dev; - struct w83l786ng_data *data; - int i, err = 0; - u8 reg_tmp; + struct i2c_adapter *adapter = client->adapter; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { - goto exit; - } - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access w83l786ng_{read,write}_value. */ - - if (!(data = kzalloc(sizeof(struct w83l786ng_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; + return -ENODEV; } - client = &data->client; - dev = &client->dev; - i2c_set_clientdata(client, data); - client->addr = address; - client->adapter = adapter; - client->driver = &w83l786ng_driver; - /* * Now we do the remaining detection. A negative kind means that * the driver was loaded with no force parameter (default), so we @@ -627,8 +611,8 @@ w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind) W83L786NG_REG_CONFIG) & 0x80) != 0x00)) { dev_dbg(&adapter->dev, "W83L786NG detection failed at 0x%02x.\n", - address); - goto exit_free; + client->addr); + return -ENODEV; } } @@ -651,17 +635,31 @@ w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind) dev_info(&adapter->dev, "Unsupported chip (man_id=0x%04X, " "chip_id=0x%02X).\n", man_id, chip_id); - goto exit_free; + return -ENODEV; } } - /* Fill in the remaining client fields and put into the global list */ - strlcpy(client->name, "w83l786ng", I2C_NAME_SIZE); - mutex_init(&data->update_lock); + strlcpy(info->type, "w83l786ng", I2C_NAME_SIZE); - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto exit_free; + return 0; +} + +static int +w83l786ng_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct w83l786ng_data *data; + int i, err = 0; + u8 reg_tmp; + + data = kzalloc(sizeof(struct w83l786ng_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); /* Initialize the chip */ w83l786ng_init_client(client); @@ -693,25 +691,19 @@ w83l786ng_detect(struct i2c_adapter *adapter, int address, int kind) exit_remove: sysfs_remove_group(&client->dev.kobj, &w83l786ng_group); - i2c_detach_client(client); -exit_free: kfree(data); exit: return err; } static int -w83l786ng_detach_client(struct i2c_client *client) +w83l786ng_remove(struct i2c_client *client) { struct w83l786ng_data *data = i2c_get_clientdata(client); - int err; hwmon_device_unregister(data->hwmon_dev); sysfs_remove_group(&client->dev.kobj, &w83l786ng_group); - if ((err = i2c_detach_client(client))) - return err; - kfree(data); return 0; -- cgit v1.2.3 From 84e0f3f6c1e26588fdcb9f1b0f99d0275229bc99 Mon Sep 17 00:00:00 2001 From: Dimitri Gorokhovik Date: Wed, 16 Jul 2008 20:33:34 +0200 Subject: ide: it821x in pass-through mode segfaults in 2.6.26-stable The driver of ITE8212 in pass-through mode (it8212.noraid=1 on cmndline) attempts to use the field `.dma_host_set' of the struct ide_dma_ops in `ide_config_drive_speed' which is set to NULL by default. So give a value to all fields of the struct ide_dma_ops. Signed-off-by: Dimitri Gorokhovik Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/it821x.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 6ab04115286b..cbf647202994 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -512,8 +512,14 @@ static void __devinit it821x_quirkproc(ide_drive_t *drive) } static struct ide_dma_ops it821x_pass_through_dma_ops = { + .dma_host_set = ide_dma_host_set, + .dma_setup = ide_dma_setup, + .dma_exec_cmd = ide_dma_exec_cmd, .dma_start = it821x_dma_start, .dma_end = it821x_dma_end, + .dma_test_irq = ide_dma_test_irq, + .dma_timeout = ide_dma_timeout, + .dma_lost_irq = ide_dma_lost_irq, }; /** -- cgit v1.2.3 From 0b6abc17700a7843b165c677da0ac94522f83083 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 16 Jul 2008 20:33:35 +0200 Subject: ide: avoid DMA on the stack for REQ_TYPE_ATA_PC Some REQ_TYPE_ATA_PC commands uses the stack buffers for DMA, which leads to memory corruption on a non-coherent platform. With regard to alignment and padding, ide-cd has the the dma safe check for sg requests and REQ_TYPE_ATA_PC. This adds the stack buffer check to that check. Signed-off-by: FUJITA Tomonori Acked-by: Borislav Petkov Cc: Thomas Bogendoerfer Cc: Tejun Heo Cc: Jens Axboe Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index d99847157186..d6667c36568c 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1195,6 +1195,7 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) int mask = drive->queue->dma_alignment; unsigned long addr = (unsigned long)page_address(bio_page(rq->bio)); + unsigned long stack_mask = ~(THREAD_SIZE - 1); info->dma = drive->using_dma; @@ -1206,6 +1207,10 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) */ if ((rq->data_len & 15) || (addr & mask)) info->dma = 0; + + if (!((addr & stack_mask) ^ + ((unsigned long)current->stack & stack_mask))) + info->dma = 0; } /* start sending the command to the drive */ -- cgit v1.2.3 From e5318b531b008c79d2a0c0df06a7b8628da38e2f Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 16 Jul 2008 20:33:35 +0200 Subject: ide: use the dma safe check for REQ_TYPE_ATA_PC This uses the dma safe check for REQ_TYPE_ATA_PC. The dma safe check is used for only sg requests but it should be used for other non fs commands. This uses blk_queue_update_dma_pad to make the intention clear though ide don't use the blk APIs so it doesn't change anything. Signed-off-by: FUJITA Tomonori Acked-by: Borislav Petkov Cc: Thomas Bogendoerfer Cc: Tejun Heo Cc: Jens Axboe Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index d6667c36568c..e12d60278210 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1191,12 +1191,17 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) info->dma = 0; /* sg request */ - if (rq->bio) { - int mask = drive->queue->dma_alignment; - unsigned long addr = - (unsigned long)page_address(bio_page(rq->bio)); + if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) { + struct request_queue *q = drive->queue; + unsigned int alignment; + unsigned long addr; unsigned long stack_mask = ~(THREAD_SIZE - 1); + if (rq->bio) + addr = (unsigned long)bio_data(rq->bio); + else + addr = (unsigned long)rq->data; + info->dma = drive->using_dma; /* @@ -1205,7 +1210,8 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) * NOTE! The "len" and "addr" checks should possibly have * separate masks. */ - if ((rq->data_len & 15) || (addr & mask)) + alignment = queue_dma_alignment(q) | q->dma_pad_mask; + if (addr & alignment || rq->data_len & alignment) info->dma = 0; if (!((addr & stack_mask) ^ @@ -1877,6 +1883,7 @@ static int ide_cdrom_setup(ide_drive_t *drive) blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn); blk_queue_dma_alignment(drive->queue, 31); + blk_queue_update_dma_pad(drive->queue, 15); drive->queue->unplug_delay = (1 * HZ) / 1000; if (!drive->queue->unplug_delay) drive->queue->unplug_delay = 1; -- cgit v1.2.3 From 96b1dfe8fe02e35f017c885b11f0beb10ff4f316 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 20 Jun 2008 20:53:35 +0200 Subject: BAST: Remove old IDE driver Remove the old BAST IDE driver, as we are now using the platform-pata support. Signed-off-by: Ben Dooks Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 7 ---- drivers/ide/arm/Makefile | 1 - drivers/ide/arm/bast-ide.c | 90 ---------------------------------------------- 3 files changed, 98 deletions(-) delete mode 100644 drivers/ide/arm/bast-ide.c diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index cf707c8f08d4..cd08dba8261b 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -829,13 +829,6 @@ config BLK_DEV_IDE_RAPIDE Say Y here if you want to support the Yellowstone RapIDE controller manufactured for use with Acorn computers. -config BLK_DEV_IDE_BAST - tristate "Simtec BAST / Thorcom VR1000 IDE support" - depends on ARM && (ARCH_BAST || MACH_VR1000) - help - Say Y here if you want to support the onboard IDE channels on the - Simtec BAST or the Thorcom VR1000 - config IDE_H8300 tristate "H8300 IDE support" depends on H8300 diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile index 936e7b0237f5..5bc26053afa6 100644 --- a/drivers/ide/arm/Makefile +++ b/drivers/ide/arm/Makefile @@ -1,7 +1,6 @@ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o -obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o ifeq ($(CONFIG_IDE_ARM), m) diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c deleted file mode 100644 index 8e8c28104b45..000000000000 --- a/drivers/ide/arm/bast-ide.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include - -#define DRV_NAME "bast-ide" - -static int __init bastide_register(unsigned int base, unsigned int aux, int irq) -{ - ide_hwif_t *hwif; - hw_regs_t hw; - int i; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - - memset(&hw, 0, sizeof(hw)); - - base += BAST_IDE_CS; - aux += BAST_IDE_CS; - - for (i = 0; i <= 7; i++) { - hw.io_ports_array[i] = (unsigned long)base; - base += 0x20; - } - - hw.io_ports.ctl_addr = aux + (6 * 0x20); - hw.irq = irq; - hw.chipset = ide_generic; - - hwif = ide_find_port(); - if (hwif == NULL) - goto out; - - i = hwif->index; - - ide_init_port_data(hwif, i); - ide_init_port_hw(hwif, &hw); - hwif->port_ops = NULL; - - idx[0] = i; - - ide_device_add(idx, NULL); -out: - return 0; -} - -static int __init bastide_init(void) -{ - unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS; - - /* we can treat the VR1000 and the BAST the same */ - - if (!(machine_is_bast() || machine_is_vr1000())) - return 0; - - printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n"); - - if (!request_mem_region(base, 0x400000, DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0); - bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1); - - return 0; -} - -module_init(bastide_init); - -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver"); -- cgit v1.2.3 From e4e8d02f56f5c0cefc6713384629e068193d706a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:35 +0200 Subject: ide: remove needless includes from ide-lib.c Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 47af80df6872..7e053d217732 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -1,26 +1,11 @@ -#include #include #include #include -#include -#include #include -#include -#include -#include -#include -#include -#include -#include #include #include #include -#include -#include -#include -#include - static const char *udma_str[] = { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44", "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" }; -- cgit v1.2.3 From f0ffc9872e972e9d9fe8f7ae577ff046dbdba51b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:36 +0200 Subject: ide: remove unused XFER_UDMA_SLOW Remove unused XFER_UDMA_SLOW from ide_timing[]. While at it: - fix re-defining XFER_PIO_5 (no need to define it in ide-timing.h as it is defined in which is included by ) - fix whitespace damage There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-timing.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index 2e91c5870b4c..a20c4cbbfcdb 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -28,9 +28,6 @@ #include #include -#define XFER_PIO_5 0x0d -#define XFER_UDMA_SLOW 0x4f - struct ide_timing { short mode; short setup; /* t1 */ @@ -61,12 +58,10 @@ static struct ide_timing ide_timing[] = { { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, - { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, - { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, -- cgit v1.2.3 From 71d5161426c26742ba053fe93637559cbe2cea37 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:36 +0200 Subject: ide: use u8 for xfer modes in ide-timing.h There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-timing.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index a20c4cbbfcdb..ebe884d76881 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -29,7 +29,7 @@ #include struct ide_timing { - short mode; + u8 mode; short setup; /* t1 */ short act8b; /* t2 for 8-bit io */ short rec8b; /* t2i for 8-bit io */ @@ -76,7 +76,7 @@ static struct ide_timing ide_timing[] = { { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, - { -1 } + { 0xff } }; #define IDE_TIMING_SETUP 0x01 @@ -122,17 +122,18 @@ static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, struct if (what & IDE_TIMING_UDMA ) m->udma = max(a->udma, b->udma); } -static struct ide_timing* ide_timing_find_mode(short speed) +static struct ide_timing *ide_timing_find_mode(u8 speed) { struct ide_timing *t; for (t = ide_timing; t->mode != speed; t++) - if (t->mode < 0) + if (t->mode == 0xff) return NULL; return t; } -static int ide_timing_compute(ide_drive_t *drive, short speed, struct ide_timing *t, int T, int UT) +static int ide_timing_compute(ide_drive_t *drive, u8 speed, + struct ide_timing *t, int T, int UT) { struct hd_driveid *id = drive->id; struct ide_timing *s, p; -- cgit v1.2.3 From 3be53f3f213223f50d8e29b5e1869685bf040a1e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:36 +0200 Subject: ide: move some bits from ide-timing.h to Move struct ide_timing and IDE_TIMING_* defines to from drivers/ide/ide-timing.h. While at it: - use u8/u16 instead of short for struct ide_timing fields - use enum for IDE_TIMING_* There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-timing.h | 23 ----------------------- include/linux/ide.h | 28 ++++++++++++++++++++++++++++ 2 files changed, 28 insertions(+), 23 deletions(-) diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index ebe884d76881..724879910ac8 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -28,18 +28,6 @@ #include #include -struct ide_timing { - u8 mode; - short setup; /* t1 */ - short act8b; /* t2 for 8-bit io */ - short rec8b; /* t2i for 8-bit io */ - short cyc8b; /* t0 for 8-bit io */ - short active; /* t2 or tD */ - short recover; /* t2i or tK */ - short cycle; /* t0 */ - short udma; /* t2CYCTYP/2 */ -}; - /* * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). * These were taken from ATA/ATAPI-6 standard, rev 0a, except @@ -79,17 +67,6 @@ static struct ide_timing ide_timing[] = { { 0xff } }; -#define IDE_TIMING_SETUP 0x01 -#define IDE_TIMING_ACT8B 0x02 -#define IDE_TIMING_REC8B 0x04 -#define IDE_TIMING_CYC8B 0x08 -#define IDE_TIMING_8BIT 0x0e -#define IDE_TIMING_ACTIVE 0x10 -#define IDE_TIMING_RECOVER 0x20 -#define IDE_TIMING_CYCLE 0x40 -#define IDE_TIMING_UDMA 0x80 -#define IDE_TIMING_ALL 0xff - #define ENOUGH(v,unit) (((v)-1)/(unit)+1) #define EZ(v,unit) ((v)?ENOUGH(v,unit):0) diff --git a/include/linux/ide.h b/include/linux/ide.h index ac4eeb2932ef..81c6ea436beb 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1271,6 +1271,34 @@ static inline int ide_dev_is_sata(struct hd_driveid *id) u64 ide_get_lba_addr(struct ide_taskfile *, int); u8 ide_dump_status(ide_drive_t *, const char *, u8); +struct ide_timing { + u8 mode; + u8 setup; /* t1 */ + u16 act8b; /* t2 for 8-bit io */ + u16 rec8b; /* t2i for 8-bit io */ + u16 cyc8b; /* t0 for 8-bit io */ + u16 active; /* t2 or tD */ + u16 recover; /* t2i or tK */ + u16 cycle; /* t0 */ + u16 udma; /* t2CYCTYP/2 */ +}; + +enum { + IDE_TIMING_SETUP = (1 << 0), + IDE_TIMING_ACT8B = (1 << 1), + IDE_TIMING_REC8B = (1 << 2), + IDE_TIMING_CYC8B = (1 << 3), + IDE_TIMING_8BIT = IDE_TIMING_ACT8B | IDE_TIMING_REC8B | + IDE_TIMING_CYC8B, + IDE_TIMING_ACTIVE = (1 << 4), + IDE_TIMING_RECOVER = (1 << 5), + IDE_TIMING_CYCLE = (1 << 6), + IDE_TIMING_UDMA = (1 << 7), + IDE_TIMING_ALL = IDE_TIMING_SETUP | IDE_TIMING_8BIT | + IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER | + IDE_TIMING_CYCLE | IDE_TIMING_UDMA, +}; + typedef struct ide_pio_timings_s { int setup_time; /* Address setup (ns) minimum */ int active_time; /* Active pulse (ns) minimum */ -- cgit v1.2.3 From bd887f72d2a28a8202519e67fd9ed93ee3c4e78d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:36 +0200 Subject: ide: remove XFER_* masks from ide-timing.h * Check requested xfer mode against xfer modes instead of XFER_* masks in ide_timing_compute() and cs5535.c::cs5535_set_speed(). * Remove XFER_[MODE,MWDMA,EPIO,PIO] masks. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-timing.h | 24 +++++++----------------- drivers/ide/pci/cs5535.c | 4 +--- 2 files changed, 8 insertions(+), 20 deletions(-) diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index 724879910ac8..a401d8f82b50 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -70,11 +70,6 @@ static struct ide_timing ide_timing[] = { #define ENOUGH(v,unit) (((v)-1)/(unit)+1) #define EZ(v,unit) ((v)?ENOUGH(v,unit):0) -#define XFER_MODE 0xf0 -#define XFER_MWDMA 0x20 -#define XFER_EPIO 0x01 -#define XFER_PIO 0x00 - static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int T, int UT) { q->setup = EZ(t->setup * 1000, T); @@ -137,17 +132,12 @@ static int ide_timing_compute(ide_drive_t *drive, u8 speed, memset(&p, 0, sizeof(p)); - switch (speed & XFER_MODE) { - - case XFER_PIO: - if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = id->eide_pio; - else p.cycle = p.cyc8b = id->eide_pio_iordy; - break; - - case XFER_MWDMA: - p.cycle = id->eide_dma_min; - break; - } + if (speed <= XFER_PIO_2) + p.cycle = p.cyc8b = id->eide_pio; + else if (speed <= XFER_PIO_5) + p.cycle = p.cyc8b = id->eide_pio_iordy; + else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) + p.cycle = id->eide_dma_min; ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); } @@ -164,7 +154,7 @@ static int ide_timing_compute(ide_drive_t *drive, u8 speed, * slower/equal than the fastest PIO timing. */ - if ((speed & XFER_MODE) != XFER_PIO) { + if (speed >= XFER_SW_DMA_0) { u8 pio = ide_get_best_pio_mode(drive, 255, 5); ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT); ide_timing_merge(&p, t, t, IDE_TIMING_ALL); diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index 99fe91a191b8..2a2cb4911905 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -75,13 +75,11 @@ static unsigned int cs5535_udma_timings[5] = */ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) { - u32 reg = 0, dummy; int unit = drive->select.b.unit; - /* Set the PIO timings */ - if ((speed & XFER_MODE) == XFER_PIO) { + if (speed < XFER_SW_DMA_0) { ide_drive_t *pair = ide_get_paired_drive(drive); u8 cmd, pioa; -- cgit v1.2.3 From 2c139e7a7152f66ff93b173f8770c94ea53a691e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:36 +0200 Subject: ide: checkpatch.pl fixes for ide-timing.h Also fix placement of comments in ide_timing_compute() while at it. There should be no functional changes caused by this patch (md5sum was verified to be the same before/after the patch). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-timing.h | 93 +++++++++++++++++++++++++----------------------- 1 file changed, 48 insertions(+), 45 deletions(-) diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h index a401d8f82b50..98e05f545450 100644 --- a/drivers/ide/ide-timing.h +++ b/drivers/ide/ide-timing.h @@ -3,9 +3,7 @@ /* * Copyright (c) 1999-2001 Vojtech Pavlik - */ - -/* + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -32,7 +30,7 @@ * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). * These were taken from ATA/ATAPI-6 standard, rev 0a, except * for PIO 5, which is a nonstandard extension and UDMA6, which - * is currently supported only by Maxtor drives. + * is currently supported only by Maxtor drives. */ static struct ide_timing ide_timing[] = { @@ -67,10 +65,11 @@ static struct ide_timing ide_timing[] = { { 0xff } }; -#define ENOUGH(v,unit) (((v)-1)/(unit)+1) -#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) +#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1) +#define EZ(v, unit) ((v) ? ENOUGH(v, unit) : 0) -static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int T, int UT) +static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, + int T, int UT) { q->setup = EZ(t->setup * 1000, T); q->act8b = EZ(t->act8b * 1000, T); @@ -82,16 +81,25 @@ static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, int q->udma = EZ(t->udma * 1000, UT); } -static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, struct ide_timing *m, unsigned int what) +static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, + struct ide_timing *m, unsigned int what) { - if (what & IDE_TIMING_SETUP ) m->setup = max(a->setup, b->setup); - if (what & IDE_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); - if (what & IDE_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); - if (what & IDE_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); - if (what & IDE_TIMING_ACTIVE ) m->active = max(a->active, b->active); - if (what & IDE_TIMING_RECOVER) m->recover = max(a->recover, b->recover); - if (what & IDE_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); - if (what & IDE_TIMING_UDMA ) m->udma = max(a->udma, b->udma); + if (what & IDE_TIMING_SETUP) + m->setup = max(a->setup, b->setup); + if (what & IDE_TIMING_ACT8B) + m->act8b = max(a->act8b, b->act8b); + if (what & IDE_TIMING_REC8B) + m->rec8b = max(a->rec8b, b->rec8b); + if (what & IDE_TIMING_CYC8B) + m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & IDE_TIMING_ACTIVE) + m->active = max(a->active, b->active); + if (what & IDE_TIMING_RECOVER) + m->recover = max(a->recover, b->recover); + if (what & IDE_TIMING_CYCLE) + m->cycle = max(a->cycle, b->cycle); + if (what & IDE_TIMING_UDMA) + m->udma = max(a->udma, b->udma); } static struct ide_timing *ide_timing_find_mode(u8 speed) @@ -101,7 +109,7 @@ static struct ide_timing *ide_timing_find_mode(u8 speed) for (t = ide_timing; t->mode != speed; t++) if (t->mode == 0xff) return NULL; - return t; + return t; } static int ide_timing_compute(ide_drive_t *drive, u8 speed, @@ -110,24 +118,22 @@ static int ide_timing_compute(ide_drive_t *drive, u8 speed, struct hd_driveid *id = drive->id; struct ide_timing *s, p; -/* - * Find the mode. - */ - - if (!(s = ide_timing_find_mode(speed))) + /* + * Find the mode. + */ + s = ide_timing_find_mode(speed); + if (s == NULL) return -EINVAL; -/* - * Copy the timing from the table. - */ - + /* + * Copy the timing from the table. + */ *t = *s; -/* - * If the drive is an EIDE drive, it can tell us it needs extended - * PIO/MWDMA cycle timing. - */ - + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MWDMA cycle timing. + */ if (id && id->field_valid & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); @@ -142,28 +148,25 @@ static int ide_timing_compute(ide_drive_t *drive, u8 speed, ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); } -/* - * Convert the timing to bus clock counts. - */ - + /* + * Convert the timing to bus clock counts. + */ ide_timing_quantize(t, t, T, UT); -/* - * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T - * and some other commands. We have to ensure that the DMA cycle timing is - * slower/equal than the fastest PIO timing. - */ - + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, + * S.M.A.R.T and some other commands. We have to ensure that the + * DMA cycle timing is slower/equal than the fastest PIO timing. + */ if (speed >= XFER_SW_DMA_0) { u8 pio = ide_get_best_pio_mode(drive, 255, 5); ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT); ide_timing_merge(&p, t, t, IDE_TIMING_ALL); } -/* - * Lengthen active & recovery time so that cycle time is correct. - */ - + /* + * Lengthen active & recovery time so that cycle time is correct. + */ if (t->act8b + t->rec8b < t->cyc8b) { t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; t->rec8b = t->cyc8b - t->act8b; -- cgit v1.2.3 From f06ab3402aa2d6de060442c1053ea10b24b65076 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:37 +0200 Subject: ide: convert ide-timing.h to ide-timings.c library (take 2) * Don't include ide-timing.h in cs5535 and sis5513 host drivers (they don't need it currently). * Convert ide-timing.h to ide-timings.c library and add CONFIG_IDE_TIMINGS config option to be selected by host drivers using the library. While at it: - fix ide_timing_find_mode() placement v2: * Add missing EXPORT_SYMBOLs. (Stephen Rothwell ) There should be no functional changes caused by this patch. Cc: Stephen Rothwell Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 7 ++ drivers/ide/Makefile | 1 + drivers/ide/arm/palm_bk3710.c | 2 - drivers/ide/ide-timing.h | 183 ------------------------------------------ drivers/ide/ide-timings.c | 183 ++++++++++++++++++++++++++++++++++++++++++ drivers/ide/pci/amd74xx.c | 2 - drivers/ide/pci/cs5535.c | 2 - drivers/ide/pci/sis5513.c | 3 - drivers/ide/pci/via82cxxx.c | 2 - drivers/ide/ppc/pmac.c | 2 - include/linux/ide.h | 5 ++ 11 files changed, 196 insertions(+), 196 deletions(-) delete mode 100644 drivers/ide/ide-timing.h create mode 100644 drivers/ide/ide-timings.c diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index cd08dba8261b..994b6d39b559 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -98,6 +98,9 @@ if BLK_DEV_IDE comment "Please see Documentation/ide/ide.txt for help/info on IDE drives" +config IDE_TIMINGS + bool + config IDE_ATAPI bool @@ -469,6 +472,7 @@ config BLK_DEV_ALI15X3 config BLK_DEV_AMD74XX tristate "AMD and nVidia IDE support" depends on !ARM + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver adds explicit support for AMD-7xx and AMD-8111 chips @@ -725,6 +729,7 @@ config BLK_DEV_TRM290 config BLK_DEV_VIA82CXXX tristate "VIA82CXXX chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver adds explicit support for VIA BusMastering IDE chips. @@ -751,6 +756,7 @@ endif config BLK_DEV_IDE_PMAC tristate "PowerMac on-board IDE support" depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y + select IDE_TIMINGS help This driver provides support for the on-board IDE controller on most of the recent Apple Power Macintoshes and PowerBooks. @@ -912,6 +918,7 @@ config BLK_DEV_Q40IDE config BLK_DEV_PALMCHIP_BK3710 tristate "Palmchip bk3710 IDE controller support" depends on ARCH_DAVINCI + select IDE_TIMINGS select BLK_DEV_IDEDMA_SFF help Say Y here if you want to support the onchip IDE controller on the diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index a2b3f84d710d..cb1350684c9a 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -14,6 +14,7 @@ EXTRA_CFLAGS += -Idrivers/ide ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o # core IDE code +ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 3839f5722985..9b8a45d2cf17 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -74,8 +74,6 @@ struct palm_bk3710_udmatiming { #define BK3710_IORDYTMP 0x78 #define BK3710_IORDYTMS 0x7C -#include "../ide-timing.h" - static unsigned ideclk_period; /* in nanoseconds */ static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = { diff --git a/drivers/ide/ide-timing.h b/drivers/ide/ide-timing.h deleted file mode 100644 index 98e05f545450..000000000000 --- a/drivers/ide/ide-timing.h +++ /dev/null @@ -1,183 +0,0 @@ -#ifndef _IDE_TIMING_H -#define _IDE_TIMING_H - -/* - * Copyright (c) 1999-2001 Vojtech Pavlik - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Should you need to contact me, the author, you can do so either by - * e-mail - mail your message to , or by paper mail: - * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic - */ - -#include -#include - -/* - * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). - * These were taken from ATA/ATAPI-6 standard, rev 0a, except - * for PIO 5, which is a nonstandard extension and UDMA6, which - * is currently supported only by Maxtor drives. - */ - -static struct ide_timing ide_timing[] = { - - { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, - { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, - { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, - { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, - - { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, - { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, - { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, - - { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, - { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, - { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - - { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, - { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, - { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, - - { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, - { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, - { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, - - { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, - { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, - { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, - - { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, - - { 0xff } -}; - -#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1) -#define EZ(v, unit) ((v) ? ENOUGH(v, unit) : 0) - -static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, - int T, int UT) -{ - q->setup = EZ(t->setup * 1000, T); - q->act8b = EZ(t->act8b * 1000, T); - q->rec8b = EZ(t->rec8b * 1000, T); - q->cyc8b = EZ(t->cyc8b * 1000, T); - q->active = EZ(t->active * 1000, T); - q->recover = EZ(t->recover * 1000, T); - q->cycle = EZ(t->cycle * 1000, T); - q->udma = EZ(t->udma * 1000, UT); -} - -static void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, - struct ide_timing *m, unsigned int what) -{ - if (what & IDE_TIMING_SETUP) - m->setup = max(a->setup, b->setup); - if (what & IDE_TIMING_ACT8B) - m->act8b = max(a->act8b, b->act8b); - if (what & IDE_TIMING_REC8B) - m->rec8b = max(a->rec8b, b->rec8b); - if (what & IDE_TIMING_CYC8B) - m->cyc8b = max(a->cyc8b, b->cyc8b); - if (what & IDE_TIMING_ACTIVE) - m->active = max(a->active, b->active); - if (what & IDE_TIMING_RECOVER) - m->recover = max(a->recover, b->recover); - if (what & IDE_TIMING_CYCLE) - m->cycle = max(a->cycle, b->cycle); - if (what & IDE_TIMING_UDMA) - m->udma = max(a->udma, b->udma); -} - -static struct ide_timing *ide_timing_find_mode(u8 speed) -{ - struct ide_timing *t; - - for (t = ide_timing; t->mode != speed; t++) - if (t->mode == 0xff) - return NULL; - return t; -} - -static int ide_timing_compute(ide_drive_t *drive, u8 speed, - struct ide_timing *t, int T, int UT) -{ - struct hd_driveid *id = drive->id; - struct ide_timing *s, p; - - /* - * Find the mode. - */ - s = ide_timing_find_mode(speed); - if (s == NULL) - return -EINVAL; - - /* - * Copy the timing from the table. - */ - *t = *s; - - /* - * If the drive is an EIDE drive, it can tell us it needs extended - * PIO/MWDMA cycle timing. - */ - if (id && id->field_valid & 2) { /* EIDE drive */ - - memset(&p, 0, sizeof(p)); - - if (speed <= XFER_PIO_2) - p.cycle = p.cyc8b = id->eide_pio; - else if (speed <= XFER_PIO_5) - p.cycle = p.cyc8b = id->eide_pio_iordy; - else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) - p.cycle = id->eide_dma_min; - - ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); - } - - /* - * Convert the timing to bus clock counts. - */ - ide_timing_quantize(t, t, T, UT); - - /* - * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, - * S.M.A.R.T and some other commands. We have to ensure that the - * DMA cycle timing is slower/equal than the fastest PIO timing. - */ - if (speed >= XFER_SW_DMA_0) { - u8 pio = ide_get_best_pio_mode(drive, 255, 5); - ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT); - ide_timing_merge(&p, t, t, IDE_TIMING_ALL); - } - - /* - * Lengthen active & recovery time so that cycle time is correct. - */ - if (t->act8b + t->rec8b < t->cyc8b) { - t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; - t->rec8b = t->cyc8b - t->act8b; - } - - if (t->active + t->recover < t->cycle) { - t->active += (t->cycle - (t->active + t->recover)) / 2; - t->recover = t->cycle - t->active; - } - - return 0; -} - -#endif diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c new file mode 100644 index 000000000000..ebef6d4e3f63 --- /dev/null +++ b/drivers/ide/ide-timings.c @@ -0,0 +1,183 @@ +/* + * Copyright (c) 1999-2001 Vojtech Pavlik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Should you need to contact me, the author, you can do so either by + * e-mail - mail your message to , or by paper mail: + * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic + */ + +#include +#include +#include +#include + +/* + * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * These were taken from ATA/ATAPI-6 standard, rev 0a, except + * for PIO 5, which is a nonstandard extension and UDMA6, which + * is currently supported only by Maxtor drives. + */ + +static struct ide_timing ide_timing[] = { + + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + + { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + + { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, + + { 0xff } +}; + +struct ide_timing *ide_timing_find_mode(u8 speed) +{ + struct ide_timing *t; + + for (t = ide_timing; t->mode != speed; t++) + if (t->mode == 0xff) + return NULL; + return t; +} +EXPORT_SYMBOL_GPL(ide_timing_find_mode); + +#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1) +#define EZ(v, unit) ((v) ? ENOUGH(v, unit) : 0) + +static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, + int T, int UT) +{ + q->setup = EZ(t->setup * 1000, T); + q->act8b = EZ(t->act8b * 1000, T); + q->rec8b = EZ(t->rec8b * 1000, T); + q->cyc8b = EZ(t->cyc8b * 1000, T); + q->active = EZ(t->active * 1000, T); + q->recover = EZ(t->recover * 1000, T); + q->cycle = EZ(t->cycle * 1000, T); + q->udma = EZ(t->udma * 1000, UT); +} + +void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, + struct ide_timing *m, unsigned int what) +{ + if (what & IDE_TIMING_SETUP) + m->setup = max(a->setup, b->setup); + if (what & IDE_TIMING_ACT8B) + m->act8b = max(a->act8b, b->act8b); + if (what & IDE_TIMING_REC8B) + m->rec8b = max(a->rec8b, b->rec8b); + if (what & IDE_TIMING_CYC8B) + m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & IDE_TIMING_ACTIVE) + m->active = max(a->active, b->active); + if (what & IDE_TIMING_RECOVER) + m->recover = max(a->recover, b->recover); + if (what & IDE_TIMING_CYCLE) + m->cycle = max(a->cycle, b->cycle); + if (what & IDE_TIMING_UDMA) + m->udma = max(a->udma, b->udma); +} +EXPORT_SYMBOL_GPL(ide_timing_merge); + +int ide_timing_compute(ide_drive_t *drive, u8 speed, + struct ide_timing *t, int T, int UT) +{ + struct hd_driveid *id = drive->id; + struct ide_timing *s, p; + + /* + * Find the mode. + */ + s = ide_timing_find_mode(speed); + if (s == NULL) + return -EINVAL; + + /* + * Copy the timing from the table. + */ + *t = *s; + + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MWDMA cycle timing. + */ + if (id && id->field_valid & 2) { /* EIDE drive */ + + memset(&p, 0, sizeof(p)); + + if (speed <= XFER_PIO_2) + p.cycle = p.cyc8b = id->eide_pio; + else if (speed <= XFER_PIO_5) + p.cycle = p.cyc8b = id->eide_pio_iordy; + else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) + p.cycle = id->eide_dma_min; + + ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); + } + + /* + * Convert the timing to bus clock counts. + */ + ide_timing_quantize(t, t, T, UT); + + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, + * S.M.A.R.T and some other commands. We have to ensure that the + * DMA cycle timing is slower/equal than the fastest PIO timing. + */ + if (speed >= XFER_SW_DMA_0) { + u8 pio = ide_get_best_pio_mode(drive, 255, 5); + ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT); + ide_timing_merge(&p, t, t, IDE_TIMING_ALL); + } + + /* + * Lengthen active & recovery time so that cycle time is correct. + */ + if (t->act8b + t->rec8b < t->cyc8b) { + t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; + t->rec8b = t->cyc8b - t->act8b; + } + + if (t->active + t->recover < t->cycle) { + t->active += (t->cycle - (t->active + t->recover)) / 2; + t->recover = t->cycle - t->active; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ide_timing_compute); diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index ad222206a429..0bfcdd0e77b3 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -21,8 +21,6 @@ #include #include -#include "ide-timing.h" - enum { AMD_IDE_CONFIG = 0x41, AMD_CABLE_DETECT = 0x42, diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index 2a2cb4911905..dc97c48623f3 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -26,8 +26,6 @@ #include #include -#include "ide-timing.h" - #define MSR_ATAC_BASE 0x51300000 #define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0) #define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01) diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index e127eb25ab63..2389945ca95d 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -52,8 +52,6 @@ #include #include -#include "ide-timing.h" - /* registers layout and init values are chipset family dependant */ #define ATA_16 0x01 @@ -616,7 +614,6 @@ MODULE_LICENSE("GPL"); /* * TODO: * - CLEANUP - * - Use drivers/ide/ide-timing.h ! * - More checks in the config registers (force values instead of * relying on the BIOS setting them correctly). * - Further optimisations ? diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 3ed9728abd24..e47384c70c40 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -35,8 +35,6 @@ #include #endif -#include "ide-timing.h" - #define VIA_IDE_ENABLE 0x40 #define VIA_IDE_CONFIG 0x41 #define VIA_FIFO_CONFIG 0x43 diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index dcb2c466bb97..5b91d23269d3 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -48,8 +48,6 @@ #include #endif -#include "../ide-timing.h" - #undef IDE_PMAC_DEBUG #define DMA_WAIT_TIMEOUT 50 diff --git a/include/linux/ide.h b/include/linux/ide.h index 81c6ea436beb..057001f6b1dc 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1299,6 +1299,11 @@ enum { IDE_TIMING_CYCLE | IDE_TIMING_UDMA, }; +struct ide_timing *ide_timing_find_mode(u8); +void ide_timing_merge(struct ide_timing *, struct ide_timing *, + struct ide_timing *, unsigned int); +int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int); + typedef struct ide_pio_timings_s { int setup_time; /* Address setup (ns) minimum */ int active_time; /* Active pulse (ns) minimum */ -- cgit v1.2.3 From cc57ccc03d2a9b5622300f4b59fc8b54408c6e24 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:37 +0200 Subject: ali14xx: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/legacy/ali14xx.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 994b6d39b559..e9afafd55cd0 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -981,6 +981,7 @@ config BLK_DEV_4DRIVES config BLK_DEV_ALI14XX tristate "ALI M14xx support" + select IDE_TIMINGS help This driver is enabled at runtime using the "ali14xx.probe" kernel boot parameter. It enables support for the secondary IDE interface diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index 052125fafcfa..4ec19737f3c5 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -117,10 +117,11 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 param1, param2, param3, param4; unsigned long flags; int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); /* calculate timing, according to PIO mode */ time1 = ide_pio_cycle_time(drive, pio); - time2 = ide_pio_timings[pio].active_time; + time2 = t->active; param3 = param1 = (time2 * bus_speed + 999) / 1000; param4 = param2 = (time1 * bus_speed + 999) / 1000 - param1; if (pio < 3) { -- cgit v1.2.3 From b32b76f72df17de891181b47e714f9f897bb62a1 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:37 +0200 Subject: ht6560b: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/legacy/ht6560b.c | 7 +++---- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index e9afafd55cd0..615e0bc01844 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1001,6 +1001,7 @@ config BLK_DEV_DTC2278 config BLK_DEV_HT6560B tristate "Holtek HT6560B support" + select IDE_TIMINGS help This driver is enabled at runtime using the "ht6560b.probe" kernel boot parameter. It enables support for the secondary IDE interface diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index dd6dfb32e853..bd2f579946fa 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -216,6 +216,7 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio) if (pio) { unsigned int cycle_time; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); cycle_time = ide_pio_cycle_time(drive, pio); @@ -224,10 +225,8 @@ static u8 ht_pio2timings(ide_drive_t *drive, const u8 pio) * actual cycle time for recovery and activity * according system bus speed. */ - active_time = ide_pio_timings[pio].active_time; - recovery_time = cycle_time - - active_time - - ide_pio_timings[pio].setup_time; + active_time = t->active; + recovery_time = cycle_time - active_time - t->setup; /* * Cycle times should be Vesa bus cycles */ -- cgit v1.2.3 From 2feecface7fd62be75bd4961324dc279a04bef22 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:37 +0200 Subject: qd65xx: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/legacy/qd65xx.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 615e0bc01844..86db707ad6cc 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1011,6 +1011,7 @@ config BLK_DEV_HT6560B config BLK_DEV_QD65XX tristate "QDI QD65xx support" + select IDE_TIMINGS help This driver is enabled at runtime using the "qd65xx.probe" kernel boot parameter. It permits faster I/O speeds to be set. See the diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 51dba82f8812..63f6c31d16ea 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -207,6 +207,7 @@ static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = drive->hwif; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); unsigned int cycle_time; int active_time = 175; int recovery_time = 415; /* worst case values from the dos driver */ @@ -236,7 +237,7 @@ static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio) active_time = 110; recovery_time = cycle_time - 120; } else { - active_time = ide_pio_timings[pio].active_time; + active_time = t->active; recovery_time = cycle_time - active_time; } } -- cgit v1.2.3 From 288911af1209f5aa6119c9ec6d5a9bdb16a385b5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:37 +0200 Subject: alim15x3: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/pci/alim15x3.c | 6 ++---- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 86db707ad6cc..cadce92047fb 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -458,6 +458,7 @@ config BLK_DEV_AEC62XX config BLK_DEV_ALI15X3 tristate "ALI M15x3 chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index f2de00adf147..80d19c0eb780 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -69,7 +69,8 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); - int s_time, a_time, c_time; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); + int s_time = t->setup, a_time = t->active, c_time = t->cycle; u8 s_clc, a_clc, r_clc; unsigned long flags; int bus_speed = ide_pci_clk ? ide_pci_clk : 33; @@ -78,13 +79,10 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 cd_dma_fifo = 0; int unit = drive->select.b.unit & 1; - s_time = ide_pio_timings[pio].setup_time; - a_time = ide_pio_timings[pio].active_time; if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) s_clc = 0; if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8) a_clc = 0; - c_time = ide_pio_timings[pio].cycle_time; if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) { r_clc = 1; -- cgit v1.2.3 From 17b500de0ad79a306a0cd8acfe9a9f086ad28b4c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:38 +0200 Subject: cmd640: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/pci/cmd640.c | 8 ++++++-- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index cadce92047fb..e072bdea907a 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -329,6 +329,7 @@ config BLK_DEV_PLATFORM config BLK_DEV_CMD640 tristate "CMD640 chipset bugfix/support" depends on X86 + select IDE_TIMINGS ---help--- The CMD-Technologies CMD640 IDE chip is used on many common 486 and Pentium motherboards, usually in combination with a "Neptune" or diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index cd1ba14984ab..baa26a26709a 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -521,6 +521,7 @@ static void program_drive_counts(ide_drive_t *drive, unsigned int index) static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, u8 pio_mode, unsigned int cycle_time) { + struct ide_timing *t; int setup_time, active_time, recovery_time, clock_time; u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count; int bus_speed; @@ -532,8 +533,11 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, if (pio_mode > 5) pio_mode = 5; - setup_time = ide_pio_timings[pio_mode].setup_time; - active_time = ide_pio_timings[pio_mode].active_time; + + t = ide_timing_find_mode(XFER_PIO_0 + pio_mode); + setup_time = t->setup; + active_time = t->active; + recovery_time = cycle_time - (setup_time + active_time); clock_time = 1000 / bus_speed; cycle_count = DIV_ROUND_UP(cycle_time, clock_time); -- cgit v1.2.3 From 86a0e12fcb590a6a84b90ae00e6d6564ce770749 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:38 +0200 Subject: cmd64x: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/pci/cmd64x.c | 6 +++--- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index e072bdea907a..d5526d3af623 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -495,6 +495,7 @@ config BLK_DEV_ATIIXP config BLK_DEV_CMD64X tristate "CMD64{3|6|8|9} chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help Say Y here if you have an IDE controller which uses any of these diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index ca4774aa27ee..cfa784bacf48 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -116,6 +116,7 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = to_pci_dev(hwif->dev); + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); unsigned int cycle_time; u8 setup_count, arttim = 0; @@ -124,10 +125,9 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) cycle_time = ide_pio_cycle_time(drive, pio); - program_cycle_times(drive, cycle_time, - ide_pio_timings[pio].active_time); + program_cycle_times(drive, cycle_time, t->active); - setup_count = quantize_timing(ide_pio_timings[pio].setup_time, + setup_count = quantize_timing(t->setup, 1000 / (ide_pci_clk ? ide_pci_clk : 33)); /* -- cgit v1.2.3 From 713a590dea9a61e84f2837e75c5e9429d95908b5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:38 +0200 Subject: cy82c693: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/pci/cy82c693.c | 9 ++++----- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index d5526d3af623..7446db649064 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -510,6 +510,7 @@ config BLK_DEV_TRIFLEX config BLK_DEV_CY82C693 tristate "CY82C693 chipset support" + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help This driver adds detection and support for the CY82C693 chipset diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 8c534afcb6c8..e14ad5530fa4 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -133,6 +133,7 @@ static int calc_clk(int time, int bus_speed) */ static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) { + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); int clk1, clk2; int bus_speed = ide_pci_clk ? ide_pci_clk : 33; @@ -141,15 +142,13 @@ static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) */ /* let's calc the address setup time clocks */ - p_pclk->address_time = (u8)calc_clk(ide_pio_timings[pio].setup_time, bus_speed); + p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed); /* let's calc the active and recovery time clocks */ - clk1 = calc_clk(ide_pio_timings[pio].active_time, bus_speed); + clk1 = calc_clk(t->active, bus_speed); /* calc recovery timing */ - clk2 = ide_pio_timings[pio].cycle_time - - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + clk2 = t->cycle - t->active - t->setup; clk2 = calc_clk(clk2, bus_speed); -- cgit v1.2.3 From 3f847571a1cf845a338bcd352f31240b3615f40d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:38 +0200 Subject: sl82c105: convert to use ide_timing_find_mode() There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 1 + drivers/ide/pci/sl82c105.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 7446db649064..5f4d6ea379f6 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -703,6 +703,7 @@ config BLK_DEV_SIS5513 config BLK_DEV_SL82C105 tristate "Winbond SL82c105 support" depends on (PPC || ARM) + select IDE_TIMINGS select BLK_DEV_IDEDMA_PCI help If you have a Winbond SL82c105 IDE controller, say Y here to enable diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index ce84fa045d39..6efbde297174 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -47,10 +47,11 @@ */ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio) { + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); unsigned int cmd_on, cmd_off; u8 iordy = 0; - cmd_on = (ide_pio_timings[pio].active_time + 29) / 30; + cmd_on = (t->active + 29) / 30; cmd_off = (ide_pio_cycle_time(drive, pio) - 30 * cmd_on + 29) / 30; if (cmd_on == 0) -- cgit v1.2.3 From b96f7384646519da54ad50bfad8d53b915b70cb3 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:38 +0200 Subject: ide-mpc8xx: convert to use ide_timing_find_mode() Also fix (disabled) debugging code while at it. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ppc/mpc8xx.c | 33 +++++++++++++-------------------- 1 file changed, 13 insertions(+), 20 deletions(-) diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index 236f9c38e519..33bc699814d7 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -89,7 +89,7 @@ ide_ioport_desc_t ioport_dsc[MAX_HWIFS] = { #endif /* IDE0_BASE_OFFSET */ }; -ide_pio_timings_t ide_pio_clocks[6]; +struct ide_timing ide_pio_clocks[6]; int hold_time[6] = {30, 20, 15, 10, 10, 10 }; /* PIO Mode 5 with IORDY (nonstandard) */ /* @@ -200,30 +200,23 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) /* Compute clock cycles for PIO timings */ for (i=0; i<6; ++i) { bd_t *binfo = (bd_t *)__res; + struct ide_timing *t, *n; hold_time[i] = PCMCIA_MK_CLKS (hold_time[i], binfo->bi_busfreq); - ide_pio_clocks[i].setup_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].setup_time, - binfo->bi_busfreq); - ide_pio_clocks[i].active_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].active_time, - binfo->bi_busfreq); - ide_pio_clocks[i].cycle_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].cycle_time, - binfo->bi_busfreq); + + t = ide_timing_find_mode(XFER_PIO_0 + i); + n = &ide_pio_clocks[i]; + + n->setup = PCMCIA_MK_CLKS(t->setup, binfo->bi_busfreq); + n->active = PCMCIA_MK_CLKS(t->active, binfo->bi_busfreq); + n->cycle = PCMCIA_MK_CLKS(t->cycle, binfo->bi_busfreq); #if 0 printk ("PIO mode %d timings: %d/%d/%d => %d/%d/%d\n", i, - ide_pio_clocks[i].setup_time, - ide_pio_clocks[i].active_time, - ide_pio_clocks[i].hold_time, - ide_pio_clocks[i].cycle_time, - ide_pio_timings[i].setup_time, - ide_pio_timings[i].active_time, - ide_pio_timings[i].hold_time, - ide_pio_timings[i].cycle_time); + t->setup, t->active, t->cycle, + n->setup, n->active, n->cycle); #endif } } @@ -408,8 +401,8 @@ static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) mask = ~(PCMCIA_SHT(0xFF) | PCMCIA_SST(0xFF) | PCMCIA_SL(0xFF)); timing = PCMCIA_SHT(hold_time[pio] ) - | PCMCIA_SST(ide_pio_clocks[pio].setup_time ) - | PCMCIA_SL (ide_pio_clocks[pio].active_time) + | PCMCIA_SST(ide_pio_clocks[pio].setup) + | PCMCIA_SL (ide_pio_clocks[pio].active) ; #if 1 -- cgit v1.2.3 From 8a97206e31dc2e2f8f9b4d97e234b5c701fe9894 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:38 +0200 Subject: ide-pmac: convert to use ide_timing_find_mode() Also update my Copyrights while at it. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ppc/pmac.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 5b91d23269d3..cfa103a51b31 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -5,7 +5,7 @@ * for doing DMA. * * Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -493,6 +493,7 @@ static void pmac_outbsync(ide_hwif_t *hwif, u8 value, unsigned long port) static void pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) { + struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); u32 *timings, t; unsigned accessTicks, recTicks; unsigned accessTime, recTime; @@ -524,10 +525,9 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) } case controller_kl_ata4: /* 66Mhz cell */ - recTime = cycle_time - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + recTime = cycle_time - tim->active - tim->setup; recTime = max(recTime, 150U); - accessTime = ide_pio_timings[pio].active_time; + accessTime = tim->active; accessTime = max(accessTime, 150U); accessTicks = SYSCLK_TICKS_66(accessTime); accessTicks = min(accessTicks, 0x1fU); @@ -540,10 +540,9 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) default: { /* 33Mhz cell */ int ebit = 0; - recTime = cycle_time - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + recTime = cycle_time - tim->active - tim->setup; recTime = max(recTime, 150U); - accessTime = ide_pio_timings[pio].active_time; + accessTime = tim->active; accessTime = max(accessTime, 150U); accessTicks = SYSCLK_TICKS(accessTime); accessTicks = min(accessTicks, 0x1fU); -- cgit v1.2.3 From c9d6c1a2379373219bb3271bdcbdc0ab2edf349d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:39 +0200 Subject: ide: move ide_pio_cycle_time() to ide-timings.c All ide_pio_cycle_time() users already select CONFIG_IDE_TIMINGS so move the function from ide-lib.c to ide-timings.c. While at it: - convert ide_pio_cycle_time() to use ide_timing_find_mode() - cleanup ide_pio_cycle_time() a bit There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 23 ----------------------- drivers/ide/ide-timings.c | 22 ++++++++++++++++++++++ include/linux/ide.h | 2 +- 3 files changed, 23 insertions(+), 24 deletions(-) diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 7e053d217732..efa5bfa64d01 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -188,29 +188,6 @@ static int ide_scan_pio_blacklist (char *model) return -1; } -unsigned int ide_pio_cycle_time(ide_drive_t *drive, u8 pio) -{ - struct hd_driveid *id = drive->id; - int cycle_time = 0; - - if (id->field_valid & 2) { - if (id->capability & 8) - cycle_time = id->eide_pio_iordy; - else - cycle_time = id->eide_pio; - } - - /* conservative "downgrade" for all pre-ATA2 drives */ - if (pio < 3) { - if (cycle_time && cycle_time < ide_pio_timings[pio].cycle_time) - cycle_time = 0; /* use standard timing */ - } - - return cycle_time ? cycle_time : ide_pio_timings[pio].cycle_time; -} - -EXPORT_SYMBOL_GPL(ide_pio_cycle_time); - /** * ide_get_best_pio_mode - get PIO mode from drive * @drive: drive to consider diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c index ebef6d4e3f63..8c2f8327f487 100644 --- a/drivers/ide/ide-timings.c +++ b/drivers/ide/ide-timings.c @@ -1,5 +1,6 @@ /* * Copyright (c) 1999-2001 Vojtech Pavlik + * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -75,6 +76,27 @@ struct ide_timing *ide_timing_find_mode(u8 speed) } EXPORT_SYMBOL_GPL(ide_timing_find_mode); +u16 ide_pio_cycle_time(ide_drive_t *drive, u8 pio) +{ + struct hd_driveid *id = drive->id; + struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); + u16 cycle = 0; + + if (id->field_valid & 2) { + if (id->capability & 8) + cycle = id->eide_pio_iordy; + else + cycle = id->eide_pio; + + /* conservative "downgrade" for all pre-ATA2 drives */ + if (pio < 3 && cycle < t->cycle) + cycle = 0; /* use standard timing */ + } + + return cycle ? cycle : t->cycle; +} +EXPORT_SYMBOL_GPL(ide_pio_cycle_time); + #define ENOUGH(v, unit) (((v) - 1) / (unit) + 1) #define EZ(v, unit) ((v) ? ENOUGH(v, unit) : 0) diff --git a/include/linux/ide.h b/include/linux/ide.h index 057001f6b1dc..3899c761b302 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1300,6 +1300,7 @@ enum { }; struct ide_timing *ide_timing_find_mode(u8); +u16 ide_pio_cycle_time(ide_drive_t *, u8); void ide_timing_merge(struct ide_timing *, struct ide_timing *, struct ide_timing *, unsigned int); int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int); @@ -1311,7 +1312,6 @@ typedef struct ide_pio_timings_s { /* active + recovery (+ setup for some chips) */ } ide_pio_timings_t; -unsigned int ide_pio_cycle_time(ide_drive_t *, u8); u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8); extern const ide_pio_timings_t ide_pio_timings[6]; -- cgit v1.2.3 From 3e153cfb5e38ae237ff27a10a833946ac95db8a4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:39 +0200 Subject: ide: remove no longer used ide_pio_timings[] Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 17 ----------------- include/linux/ide.h | 8 -------- 2 files changed, 25 deletions(-) diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index efa5bfa64d01..3e12f229bd5f 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -75,23 +75,6 @@ static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) return min(speed, mode); } -/* - * Standard (generic) timings for PIO modes, from ATA2 specification. - * These timings are for access to the IDE data port register *only*. - * Some drives may specify a mode, while also specifying a different - * value for cycle_time (from drive identification data). - */ -const ide_pio_timings_t ide_pio_timings[6] = { - { 70, 165, 600 }, /* PIO Mode 0 */ - { 50, 125, 383 }, /* PIO Mode 1 */ - { 30, 100, 240 }, /* PIO Mode 2 */ - { 30, 80, 180 }, /* PIO Mode 3 with IORDY */ - { 25, 70, 120 }, /* PIO Mode 4 with IORDY */ - { 20, 50, 100 } /* PIO Mode 5 with IORDY (nonstandard) */ -}; - -EXPORT_SYMBOL_GPL(ide_pio_timings); - /* * Shared data/functions for determining best PIO mode for an IDE drive. * Most of this stuff originally lived in cmd640.c, and changes to the diff --git a/include/linux/ide.h b/include/linux/ide.h index 3899c761b302..4e44525fa5ca 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1305,15 +1305,7 @@ void ide_timing_merge(struct ide_timing *, struct ide_timing *, struct ide_timing *, unsigned int); int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int); -typedef struct ide_pio_timings_s { - int setup_time; /* Address setup (ns) minimum */ - int active_time; /* Active pulse (ns) minimum */ - int cycle_time; /* Cycle time (ns) minimum = */ - /* active + recovery (+ setup for some chips) */ -} ide_pio_timings_t; - u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8); -extern const ide_pio_timings_t ide_pio_timings[6]; int ide_set_pio_mode(ide_drive_t *, u8); int ide_set_dma_mode(ide_drive_t *, u8); -- cgit v1.2.3 From 9ad540937554a3779c5fe7af13aa390b1d2aeb3e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:39 +0200 Subject: ide: move PIO blacklist to ide-pio-blacklist.c Move PIO blacklist to ide-pio-blacklist.c. While at it: - fix comment - fix whitespace damage There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Makefile | 3 +- drivers/ide/ide-lib.c | 96 ----------------------------------------- drivers/ide/ide-pio-blacklist.c | 94 ++++++++++++++++++++++++++++++++++++++++ include/linux/ide.h | 2 + 4 files changed, 98 insertions(+), 97 deletions(-) create mode 100644 drivers/ide/ide-pio-blacklist.c diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index cb1350684c9a..8605536ea18f 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -11,7 +11,8 @@ EXTRA_CFLAGS += -Idrivers/ide -ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o +ide-core-y += ide.o ide-io.o ide-iops.o ide-lib.o ide-probe.o ide-taskfile.o \ + ide-pio-blacklist.o # core IDE code ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 3e12f229bd5f..13af72f09ec4 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -75,102 +75,6 @@ static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) return min(speed, mode); } -/* - * Shared data/functions for determining best PIO mode for an IDE drive. - * Most of this stuff originally lived in cmd640.c, and changes to the - * ide_pio_blacklist[] table should be made with EXTREME CAUTION to avoid - * breaking the fragile cmd640.c support. - */ - -/* - * Black list. Some drives incorrectly report their maximal PIO mode, - * at least in respect to CMD640. Here we keep info on some known drives. - */ -static struct ide_pio_info { - const char *name; - int pio; -} ide_pio_blacklist [] = { - { "Conner Peripherals 540MB - CFS540A", 3 }, - - { "WDC AC2700", 3 }, - { "WDC AC2540", 3 }, - { "WDC AC2420", 3 }, - { "WDC AC2340", 3 }, - { "WDC AC2250", 0 }, - { "WDC AC2200", 0 }, - { "WDC AC21200", 4 }, - { "WDC AC2120", 0 }, - { "WDC AC2850", 3 }, - { "WDC AC1270", 3 }, - { "WDC AC1170", 1 }, - { "WDC AC1210", 1 }, - { "WDC AC280", 0 }, - { "WDC AC31000", 3 }, - { "WDC AC31200", 3 }, - - { "Maxtor 7131 AT", 1 }, - { "Maxtor 7171 AT", 1 }, - { "Maxtor 7213 AT", 1 }, - { "Maxtor 7245 AT", 1 }, - { "Maxtor 7345 AT", 1 }, - { "Maxtor 7546 AT", 3 }, - { "Maxtor 7540 AV", 3 }, - - { "SAMSUNG SHD-3121A", 1 }, - { "SAMSUNG SHD-3122A", 1 }, - { "SAMSUNG SHD-3172A", 1 }, - - { "ST5660A", 3 }, - { "ST3660A", 3 }, - { "ST3630A", 3 }, - { "ST3655A", 3 }, - { "ST3391A", 3 }, - { "ST3390A", 1 }, - { "ST3600A", 1 }, - { "ST3290A", 0 }, - { "ST3144A", 0 }, - { "ST3491A", 1 }, /* reports 3, should be 1 or 2 (depending on */ - /* drive) according to Seagates FIND-ATA program */ - - { "QUANTUM ELS127A", 0 }, - { "QUANTUM ELS170A", 0 }, - { "QUANTUM LPS240A", 0 }, - { "QUANTUM LPS210A", 3 }, - { "QUANTUM LPS270A", 3 }, - { "QUANTUM LPS365A", 3 }, - { "QUANTUM LPS540A", 3 }, - { "QUANTUM LIGHTNING 540A", 3 }, - { "QUANTUM LIGHTNING 730A", 3 }, - - { "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */ - { "QUANTUM FIREBALL_640", 3 }, - { "QUANTUM FIREBALL_1080", 3 }, - { "QUANTUM FIREBALL_1280", 3 }, - { NULL, 0 } -}; - -/** - * ide_scan_pio_blacklist - check for a blacklisted drive - * @model: Drive model string - * - * This routine searches the ide_pio_blacklist for an entry - * matching the start/whole of the supplied model name. - * - * Returns -1 if no match found. - * Otherwise returns the recommended PIO mode from ide_pio_blacklist[]. - */ - -static int ide_scan_pio_blacklist (char *model) -{ - struct ide_pio_info *p; - - for (p = ide_pio_blacklist; p->name != NULL; p++) { - if (strncmp(p->name, model, strlen(p->name)) == 0) - return p->pio; - } - return -1; -} - /** * ide_get_best_pio_mode - get PIO mode from drive * @drive: drive to consider diff --git a/drivers/ide/ide-pio-blacklist.c b/drivers/ide/ide-pio-blacklist.c new file mode 100644 index 000000000000..a8c2c8f8660a --- /dev/null +++ b/drivers/ide/ide-pio-blacklist.c @@ -0,0 +1,94 @@ +/* + * PIO blacklist. Some drives incorrectly report their maximal PIO mode, + * at least in respect to CMD640. Here we keep info on some known drives. + * + * Changes to the ide_pio_blacklist[] should be made with EXTREME CAUTION + * to avoid breaking the fragile cmd640.c support. + */ + +#include + +static struct ide_pio_info { + const char *name; + int pio; +} ide_pio_blacklist [] = { + { "Conner Peripherals 540MB - CFS540A", 3 }, + + { "WDC AC2700", 3 }, + { "WDC AC2540", 3 }, + { "WDC AC2420", 3 }, + { "WDC AC2340", 3 }, + { "WDC AC2250", 0 }, + { "WDC AC2200", 0 }, + { "WDC AC21200", 4 }, + { "WDC AC2120", 0 }, + { "WDC AC2850", 3 }, + { "WDC AC1270", 3 }, + { "WDC AC1170", 1 }, + { "WDC AC1210", 1 }, + { "WDC AC280", 0 }, + { "WDC AC31000", 3 }, + { "WDC AC31200", 3 }, + + { "Maxtor 7131 AT", 1 }, + { "Maxtor 7171 AT", 1 }, + { "Maxtor 7213 AT", 1 }, + { "Maxtor 7245 AT", 1 }, + { "Maxtor 7345 AT", 1 }, + { "Maxtor 7546 AT", 3 }, + { "Maxtor 7540 AV", 3 }, + + { "SAMSUNG SHD-3121A", 1 }, + { "SAMSUNG SHD-3122A", 1 }, + { "SAMSUNG SHD-3172A", 1 }, + + { "ST5660A", 3 }, + { "ST3660A", 3 }, + { "ST3630A", 3 }, + { "ST3655A", 3 }, + { "ST3391A", 3 }, + { "ST3390A", 1 }, + { "ST3600A", 1 }, + { "ST3290A", 0 }, + { "ST3144A", 0 }, + { "ST3491A", 1 }, /* reports 3, should be 1 or 2 (depending on drive) + according to Seagate's FIND-ATA program */ + + { "QUANTUM ELS127A", 0 }, + { "QUANTUM ELS170A", 0 }, + { "QUANTUM LPS240A", 0 }, + { "QUANTUM LPS210A", 3 }, + { "QUANTUM LPS270A", 3 }, + { "QUANTUM LPS365A", 3 }, + { "QUANTUM LPS540A", 3 }, + { "QUANTUM LIGHTNING 540A", 3 }, + { "QUANTUM LIGHTNING 730A", 3 }, + + { "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */ + { "QUANTUM FIREBALL_640", 3 }, + { "QUANTUM FIREBALL_1080", 3 }, + { "QUANTUM FIREBALL_1280", 3 }, + { NULL, 0 } +}; + +/** + * ide_scan_pio_blacklist - check for a blacklisted drive + * @model: Drive model string + * + * This routine searches the ide_pio_blacklist for an entry + * matching the start/whole of the supplied model name. + * + * Returns -1 if no match found. + * Otherwise returns the recommended PIO mode from ide_pio_blacklist[]. + */ + +int ide_scan_pio_blacklist(char *model) +{ + struct ide_pio_info *p; + + for (p = ide_pio_blacklist; p->name != NULL; p++) { + if (strncmp(p->name, model, strlen(p->name)) == 0) + return p->pio; + } + return -1; +} diff --git a/include/linux/ide.h b/include/linux/ide.h index 4e44525fa5ca..535c439fd8f0 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1305,6 +1305,8 @@ void ide_timing_merge(struct ide_timing *, struct ide_timing *, struct ide_timing *, unsigned int); int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int); +int ide_scan_pio_blacklist(char *); + u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8); int ide_set_pio_mode(ide_drive_t *, u8); -- cgit v1.2.3 From 256c5f8eef7b9a8c8a85c15c58cda9df455f947e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:39 +0200 Subject: ide: fix hwif-s initialization * Add ide_hwifs[] entry initialization to ide_find_port_slot() and remove ide_init_port_data() calls from host drivers. * Unexport ide_init_port_data(). * Remove no longer needed init_ide_data(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/palm_bk3710.c | 1 - drivers/ide/h8300/ide-h8300.c | 1 - drivers/ide/ide-pnp.c | 1 - drivers/ide/ide-probe.c | 10 +++++++--- drivers/ide/ide.c | 15 --------------- drivers/ide/legacy/buddha.c | 1 - drivers/ide/legacy/falconide.c | 1 - drivers/ide/legacy/gayle.c | 1 - drivers/ide/legacy/ide-cs.c | 1 - drivers/ide/legacy/macide.c | 1 - drivers/ide/legacy/q40ide.c | 1 - drivers/ide/pci/delkin_cb.c | 1 - 12 files changed, 7 insertions(+), 28 deletions(-) diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 9b8a45d2cf17..c79b85b6e4a3 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -400,7 +400,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) i = hwif->index; - ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); default_hwif_mmiops(hwif); diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index ae37ee58bae2..dfce105bae64 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -199,7 +199,6 @@ static int __init h8300_ide_init(void) } index = hwif->index; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); hwif_setup(hwif); hwif->host_flags = IDE_HFLAG_NO_IO_32BIT; diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index adbd01784162..fc1e10c9d1cd 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -62,7 +62,6 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index d21e51a02c3e..592d424412ea 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1473,22 +1473,26 @@ ide_hwif_t *ide_find_port_slot(const struct ide_port_info *d) for (; i < MAX_HWIFS; i++) { hwif = &ide_hwifs[i]; if (hwif->chipset == ide_unknown) - return hwif; + goto out_found; } } else { for (i = 2; i < MAX_HWIFS; i++) { hwif = &ide_hwifs[i]; if (hwif->chipset == ide_unknown) - return hwif; + goto out_found; } for (i = 0; i < 2 && i < MAX_HWIFS; i++) { hwif = &ide_hwifs[i]; if (hwif->chipset == ide_unknown) - return hwif; + goto out_found; } } return NULL; + +out_found: + ide_init_port_data(hwif, i); + return hwif; } EXPORT_SYMBOL_GPL(ide_find_port_slot); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 2b8453510e09..32d8ee281d56 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -121,7 +121,6 @@ void ide_init_port_data(ide_hwif_t *hwif, unsigned int index) ide_port_init_devices_data(hwif); } -EXPORT_SYMBOL_GPL(ide_init_port_data); static void ide_port_init_devices_data(ide_hwif_t *hwif) { @@ -150,18 +149,6 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif) } } -static void __init init_ide_data (void) -{ - unsigned int index; - - /* Initialise all interface structures */ - for (index = 0; index < MAX_HWIFS; ++index) { - ide_hwif_t *hwif = &ide_hwifs[index]; - - ide_init_port_data(hwif, index); - } -} - void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) { ide_hwgroup_t *hwgroup = hwif->hwgroup; @@ -1021,8 +1008,6 @@ static int __init ide_init(void) goto out_port_class; } - init_ide_data(); - proc_ide_create(); return 0; diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 9a1d27ef3f8a..0497e7f85b09 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -227,7 +227,6 @@ fail_base2: if (hwif) { u8 index = hwif->index; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); idx[i] = index; diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index af11028b4794..129a812bb57f 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -111,7 +111,6 @@ static int __init falconide_init(void) u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); /* Atari has a byte-swapped IDE interface */ diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index b78941680c32..7e74b20202df 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -185,7 +185,6 @@ found: if (hwif) { u8 index = hwif->index; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); idx[i] = index; diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 8dbf4d9b6447..7c69608154c2 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -187,7 +187,6 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, i = hwif->index; - ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); hwif->port_ops = &idecs_port_ops; diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index 2e84290d0bcc..0a6195bcfeda 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -130,7 +130,6 @@ static int __init macide_init(void) u8 index = hwif->index; u8 idx[4] = { index, 0xff, 0xff, 0xff }; - ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); ide_device_add(idx, NULL); diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 8ff6e2d20834..9c2b9d078f69 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -142,7 +142,6 @@ static int __init q40ide_init(void) hwif = ide_find_port(); if (hwif) { - ide_init_port_data(hwif, hwif->index); ide_init_port_hw(hwif, &hw); /* Q40 has a byte-swapped IDE interface */ diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index af0f30051d5a..0106e2a2df77 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -93,7 +93,6 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) i = hwif->index; - ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); idx[0] = i; -- cgit v1.2.3 From 63b51c6d1d63276fd320615c042f1ff5d94ebab8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:40 +0200 Subject: ide: make ide_hwifs[] static Move ide_hwifs[] from ide.c to ide-probe.c and make it static. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 2 ++ drivers/ide/ide.c | 2 -- include/linux/ide.h | 12 ------------ 3 files changed, 2 insertions(+), 14 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 592d424412ea..97dda05914a1 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -39,6 +39,8 @@ #include #include +static ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ + /** * generic_id - add a generic drive id * @drive: drive to make an ID block for diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 32d8ee281d56..b7855a13f0ef 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -91,8 +91,6 @@ DEFINE_MUTEX(ide_cfg_mtx); __cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock); EXPORT_SYMBOL(ide_lock); -ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ - static void ide_port_init_devices_data(ide_hwif_t *); /* diff --git a/include/linux/ide.h b/include/linux/ide.h index 535c439fd8f0..15d5668198a6 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -801,18 +801,6 @@ struct ide_driver_s { int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long); -/* - * ide_hwifs[] is the master data structure used to keep track - * of just about everything in ide.c. Whenever possible, routines - * should be using pointers to a drive (ide_drive_t *) or - * pointers to a hwif (ide_hwif_t *), rather than indexing this - * structure directly (the allocation/layout may change!). - * - */ -#ifndef _IDE_C -extern ide_hwif_t ide_hwifs[]; /* master data repository */ -#endif - extern int ide_vlb_clk; extern int ide_pci_clk; -- cgit v1.2.3 From c56c5648a3bd15ff14c50f284b261140cd5b5472 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:40 +0200 Subject: ide: set hwif->dev in ide_init_port_hw() (take 2) * Add 'parent' field to hw_regs_t for optional parent device pointer (needed by macio PMAC IDE controllers) and set hwif->dev in ide_init_port_hw(). * Update au1xxx-ide.c, sgiioc4.c, pmac.c and setup-pci.c accordingly. v2: * Update scc_pata.c. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 3 ++- drivers/ide/mips/au1xxx-ide.c | 2 -- drivers/ide/pci/scc_pata.c | 1 - drivers/ide/pci/sgiioc4.c | 2 -- drivers/ide/ppc/pmac.c | 6 ++---- drivers/ide/setup-pci.c | 2 -- include/linux/ide.h | 2 +- 7 files changed, 5 insertions(+), 13 deletions(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index b7855a13f0ef..9240888e5efd 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -297,7 +297,8 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports)); hwif->irq = hw->irq; hwif->chipset = hw->chipset; - hwif->gendev.parent = hw->dev; + hwif->dev = hw->dev; + hwif->gendev.parent = hw->parent ? hw->parent : hw->dev; hwif->ack_intr = hw->ack_intr; } EXPORT_SYMBOL_GPL(ide_init_port_hw); diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 1a6c27b32498..08c46c36b7e7 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -600,8 +600,6 @@ static int au_ide_probe(struct device *dev) ide_init_port_hw(hwif, &hw); - hwif->dev = dev; - /* If the user has selected DDMA assisted copies, then set up a few local I/O function entry points */ diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 1584ebb6a185..71bff3131b96 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -572,7 +572,6 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev, hw.dev = &dev->dev; hw.chipset = ide_pci; ide_init_port_hw(hwif, &hw); - hwif->dev = &dev->dev; idx[0] = hwif->index; diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 24513e3dcd6b..af91cc525789 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -625,8 +625,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) hw.dev = &dev->dev; ide_init_port_hw(hwif, &hw); - hwif->dev = &dev->dev; - /* The IOC4 uses MMIO rather than Port IO. */ default_hwif_mmiops(hwif); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index cfa103a51b31..93fb9067c043 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -1148,8 +1148,6 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) base = ioremap(macio_resource_start(mdev, 0), 0x400); regbase = (unsigned long) base; - hwif->dev = &mdev->bus->pdev->dev; - pmif->mdev = mdev; pmif->node = mdev->ofdev.node; pmif->regbase = regbase; @@ -1171,7 +1169,8 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) memset(&hw, 0, sizeof(hw)); pmac_ide_init_ports(&hw, pmif->regbase); hw.irq = irq; - hw.dev = &mdev->ofdev.dev; + hw.dev = &mdev->bus->pdev->dev; + hw.parent = &mdev->ofdev.dev; rc = pmac_ide_setup_device(pmif, hwif, &hw); if (rc != 0) { @@ -1271,7 +1270,6 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) goto out_free_pmif; } - hwif->dev = &pdev->dev; pmif->mdev = NULL; pmif->node = np; diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index abcfb1739d4d..3dea5a59626e 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -346,8 +346,6 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, ide_init_port_hw(hwif, &hw); - hwif->dev = &dev->dev; - return hwif; } diff --git a/include/linux/ide.h b/include/linux/ide.h index 15d5668198a6..a6a2eccb6526 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -171,7 +171,7 @@ typedef struct hw_regs_s { int irq; /* our irq number */ ide_ack_intr_t *ack_intr; /* acknowledge interrupt */ hwif_chipset_t chipset; - struct device *dev; + struct device *dev, *parent; } hw_regs_t; void ide_init_port_data(struct hwif_s *, unsigned int); -- cgit v1.2.3 From a536f326a2223c951818e199e23847c2ac5e483b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:40 +0200 Subject: au1xxx-ide: don't use hwif->hwif_data * Use &auide_hwif directly instead of using hwif->hwif_data. While at it: * No need to initialize hwif->{select,config}_data. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/mips/au1xxx-ide.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 08c46c36b7e7..48d57cae63c6 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -213,10 +213,8 @@ static int auide_build_dmatable(ide_drive_t *drive) { int i, iswrite, count = 0; ide_hwif_t *hwif = HWIF(drive); - struct request *rq = HWGROUP(drive)->rq; - - _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; + _auide_hwif *ahwif = &auide_hwif; struct scatterlist *sg; iswrite = (rq_data_dir(rq) == WRITE); @@ -402,7 +400,7 @@ static const struct ide_dma_ops au1xxx_dma_ops = { static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) { - _auide_hwif *auide = (_auide_hwif *)hwif->hwif_data; + _auide_hwif *auide = &auide_hwif; dbdev_tab_t source_dev_tab, target_dev_tab; u32 dev_id, tsize, devwidth, flags; @@ -463,7 +461,7 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) #else static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d) { - _auide_hwif *auide = (_auide_hwif *)hwif->hwif_data; + _auide_hwif *auide = &auide_hwif; dbdev_tab_t source_dev_tab; int flags; @@ -608,11 +606,8 @@ static int au_ide_probe(struct device *dev) hwif->input_data = au1xxx_input_data; hwif->output_data = au1xxx_output_data; #endif - hwif->select_data = 0; /* no chipset-specific code */ - hwif->config_data = 0; /* no chipset-specific code */ auide_hwif.hwif = hwif; - hwif->hwif_data = &auide_hwif; idx[0] = hwif->index; -- cgit v1.2.3 From f333f92bf9040fb63d13c184295629c7a0ff449f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:40 +0200 Subject: ide_4drives: use struct ide_port_info Convert the driver to use struct ide_port_info - as a nice side-effect this fixes hwif->channel initialization. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/ide-4drives.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c index ecae916a3385..5cd6ce537eea 100644 --- a/drivers/ide/legacy/ide-4drives.c +++ b/drivers/ide/legacy/ide-4drives.c @@ -11,6 +11,23 @@ static int probe_4drives; module_param_named(probe, probe_4drives, bool, 0); MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); +static void ide_4drives_port_init_devs(ide_hwif_t *hwif) +{ + if (hwif->channel) { + hwif->drives[0].select.all ^= 0x20; + hwif->drives[1].select.all ^= 0x20; + } +} + +static const struct ide_port_ops ide_4drives_port_ops = { + .port_init_devs = ide_4drives_port_init_devs, +}; + +static const struct ide_port_info ide_4drives_port_info = { + .port_ops = &ide_4drives_port_ops, + .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA, +}; + static int __init ide_4drives_init(void) { ide_hwif_t *hwif, *mate; @@ -49,18 +66,10 @@ static int __init ide_4drives_init(void) mate = ide_find_port(); if (mate) { ide_init_port_hw(mate, &hw); - mate->drives[0].select.all ^= 0x20; - mate->drives[1].select.all ^= 0x20; idx[1] = mate->index; - - if (hwif) { - hwif->mate = mate; - mate->mate = hwif; - hwif->serialized = mate->serialized = 1; - } } - ide_device_add(idx, NULL); + ide_device_add(idx, &ide_4drives_port_info); return 0; } -- cgit v1.2.3 From dccdf527379dc2fe8a4efc5c75601d1d4035a750 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:40 +0200 Subject: ide-cs: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/ide-cs.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 7c69608154c2..fc53dcfbfe38 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -154,6 +154,11 @@ static const struct ide_port_ops idecs_port_ops = { .quirkproc = ide_undecoded_slave, }; +static const struct ide_port_info idecs_port_info = { + .port_ops = &idecs_port_ops, + .host_flags = IDE_HFLAG_NO_DMA, +}; + static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle) { @@ -188,11 +193,10 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, i = hwif->index; ide_init_port_hw(hwif, &hw); - hwif->port_ops = &idecs_port_ops; idx[0] = i; - ide_device_add(idx, NULL); + ide_device_add(idx, &idecs_port_info); if (hwif->present) return hwif; -- cgit v1.2.3 From 26839f09ca2d0f4239e546cd912bc9f4694f3c5e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:40 +0200 Subject: icside: don't use hwif->hwif_data * Move ecard_set_drvdata() from icside_probe() to icside_register_v{5,6}(), then use state->ioc_base instead of hwif->hwif_data in icside_maskproc() and icside_dma_test_irq(). While at it: * Add sel field to struct icside_state, then use state->{sel,ioc_base} instead of ->{select,config}_data in icside_dma_setup(). There should be no functional changes caused by this patch. Cc: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/icside.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 061456914ca3..743958044278 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -68,6 +68,7 @@ struct icside_state { unsigned int enabled; void __iomem *irq_port; void __iomem *ioc_base; + unsigned int sel; unsigned int type; ide_hwif_t *hwif[2]; }; @@ -165,7 +166,8 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = { static void icside_maskproc(ide_drive_t *drive, int mask) { ide_hwif_t *hwif = HWIF(drive); - struct icside_state *state = hwif->hwif_data; + struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); unsigned long flags; local_irq_save(flags); @@ -308,6 +310,7 @@ static int icside_dma_setup(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); struct request *rq = hwif->hwgroup->rq; unsigned int dma_mode; @@ -331,7 +334,7 @@ static int icside_dma_setup(ide_drive_t *drive) /* * Route the DMA signals to the correct interface. */ - writeb(hwif->select_data, hwif->config_data); + writeb(state->sel | hwif->channel, state->ioc_base); /* * Select the correct timing for this drive. @@ -359,7 +362,8 @@ static void icside_dma_exec_cmd(ide_drive_t *drive, u8 cmd) static int icside_dma_test_irq(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - struct icside_state *state = hwif->hwif_data; + struct expansion_card *ec = ECARD_DEV(hwif->dev); + struct icside_state *state = ecard_get_drvdata(ec); return readb(state->irq_port + (hwif->channel ? @@ -472,6 +476,8 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) state->hwif[0] = hwif; + ecard_set_drvdata(ec, state); + idx[0] = hwif->index; ide_device_add(idx, NULL); @@ -525,6 +531,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) state->irq_port = easi_base; state->ioc_base = ioc_base; + state->sel = sel; /* * Be on the safe side - disable interrupts @@ -545,13 +552,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) state->hwif[0] = hwif; state->hwif[1] = mate; - hwif->hwif_data = state; - hwif->config_data = (unsigned long)ioc_base; - hwif->select_data = sel; - - mate->hwif_data = state; - mate->config_data = (unsigned long)ioc_base; - mate->select_data = sel | 1; + ecard_set_drvdata(ec, state); if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) { d.init_dma = icside_dma_init; @@ -627,10 +628,8 @@ icside_probe(struct expansion_card *ec, const struct ecard_id *id) break; } - if (ret == 0) { - ecard_set_drvdata(ec, state); + if (ret == 0) goto out; - } kfree(state); release: -- cgit v1.2.3 From b25afdf1336237fb0e4021eb35744e577e19bd14 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:41 +0200 Subject: icside: use ide_init_port_hw() * Move ide_find_port() and default_hwif_mmiops() calls from icside_setup() to icside_register_v{5,6}(). * Convert icside_setup() to initialize hw_regs_t instead ide_hwif_t and icside_register_v{5,6}() to use ide_init_port_hw(). * Rename icside_setup() to icside_setup_ports(). There should be no functional changes caused by this patch. Cc: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/icside.c | 72 +++++++++++++++++++++++++----------------------- 1 file changed, 38 insertions(+), 34 deletions(-) diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 743958044278..c8d860060329 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -415,36 +415,24 @@ static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d) return -EOPNOTSUPP; } -static ide_hwif_t * -icside_setup(void __iomem *base, struct cardinfo *info, struct expansion_card *ec) +static void icside_setup_ports(hw_regs_t *hw, void __iomem *base, + struct cardinfo *info, struct expansion_card *ec) { unsigned long port = (unsigned long)base + info->dataoffset; - ide_hwif_t *hwif; - hwif = ide_find_port(); - if (hwif) { - /* - * Ensure we're using MMIO - */ - default_hwif_mmiops(hwif); - - hwif->io_ports.data_addr = port; - hwif->io_ports.error_addr = port + (1 << info->stepping); - hwif->io_ports.nsect_addr = port + (2 << info->stepping); - hwif->io_ports.lbal_addr = port + (3 << info->stepping); - hwif->io_ports.lbam_addr = port + (4 << info->stepping); - hwif->io_ports.lbah_addr = port + (5 << info->stepping); - hwif->io_ports.device_addr = port + (6 << info->stepping); - hwif->io_ports.status_addr = port + (7 << info->stepping); - hwif->io_ports.ctl_addr = - (unsigned long)base + info->ctrloffset; - hwif->irq = ec->irq; - hwif->chipset = ide_acorn; - hwif->gendev.parent = &ec->dev; - hwif->dev = &ec->dev; - } - - return hwif; + hw->io_ports.data_addr = port; + hw->io_ports.error_addr = port + (1 << info->stepping); + hw->io_ports.nsect_addr = port + (2 << info->stepping); + hw->io_ports.lbal_addr = port + (3 << info->stepping); + hw->io_ports.lbam_addr = port + (4 << info->stepping); + hw->io_ports.lbah_addr = port + (5 << info->stepping); + hw->io_ports.device_addr = port + (6 << info->stepping); + hw->io_ports.status_addr = port + (7 << info->stepping); + hw->io_ports.ctl_addr = (unsigned long)base + info->ctrloffset; + + hw->irq = ec->irq; + hw->dev = &ec->dev; + hw->chipset = ide_acorn; } static int __init @@ -453,6 +441,7 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) ide_hwif_t *hwif; void __iomem *base; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + hw_regs_t hw; base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0); if (!base) @@ -470,10 +459,15 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) */ icside_irqdisable_arcin_v5(ec, 0); - hwif = icside_setup(base, &icside_cardinfo_v5, ec); + icside_setup_ports(&hw, base, &icside_cardinfo_v5, ec); + + hwif = ide_find_port(); if (!hwif) return -ENODEV; + ide_init_port_hw(hwif, &hw); + default_hwif_mmiops(hwif); + state->hwif[0] = hwif; ecard_set_drvdata(ec, state); @@ -503,6 +497,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) int ret; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; struct ide_port_info d = icside_v6_port_info; + hw_regs_t hw[2]; ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); if (!ioc_base) { @@ -538,16 +533,25 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) */ icside_irqdisable_arcin_v6(ec, 0); + icside_setup_ports(&hw[0], easi_base, &icside_cardinfo_v6_1, ec); + icside_setup_ports(&hw[1], easi_base, &icside_cardinfo_v6_2, ec); + /* * Find and register the interfaces. */ - hwif = icside_setup(easi_base, &icside_cardinfo_v6_1, ec); - mate = icside_setup(easi_base, &icside_cardinfo_v6_2, ec); + hwif = ide_find_port(); + if (hwif == NULL) + return -ENODEV; - if (!hwif || !mate) { - ret = -ENODEV; - goto out; - } + ide_init_port_hw(hwif, &hw[0]); + default_hwif_mmiops(hwif); + + mate = ide_find_port(); + if (mate == NULL) + return -ENODEV; + + ide_init_port_hw(mate, &hw[1]); + default_hwif_mmiops(mate); state->hwif[0] = hwif; state->hwif[1] = mate; -- cgit v1.2.3 From 01397012b3129147890bb116431d5a794dfc3990 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:41 +0200 Subject: sgiioc4: use driver name for resource allocation Cc: Jeremy Higdon Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sgiioc4.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index af91cc525789..dd0d0f73ab16 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -608,11 +608,11 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) cmd_phys_base = bar0 + IOC4_CMD_OFFSET; if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE, - hwif->name)) { + DRV_NAME)) { printk(KERN_ERR "%s : %s -- ERROR, Addresses " "0x%p to 0x%p ALREADY in use\n", - __func__, hwif->name, (void *) cmd_phys_base, + __func__, DRV_NAME, (void *) cmd_phys_base, (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE); return -ENOMEM; } -- cgit v1.2.3 From c1da678b5b4d8ce7836ed1ded80109d1db37efe0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:41 +0200 Subject: ide: tighten checks on PCI BARs in ide_hwif_configure() Alan has fixed PCI layer handling of PCI IDE in Compatibility mode so PCI BAR 0/1 (and/or 2/3) content reported by kernel should never be zero. Tighten checks on PCI BARs and also fix printk() message while on it. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/setup-pci.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 3dea5a59626e..166211f53f17 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -319,18 +319,18 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, ctl = pci_resource_start(dev, 2*port+1); base = pci_resource_start(dev, 2*port); - if ((ctl && !base) || (base && !ctl)) { - printk(KERN_ERR "%s: inconsistent baseregs (BIOS) " - "for port %d, skipping\n", d->name, port); - return NULL; - } - } - if (!ctl) { + } else { /* Use default values */ ctl = port ? 0x374 : 0x3f4; base = port ? 0x170 : 0x1f0; } + if (!base || !ctl) { + printk(KERN_ERR "%s: bad PCI BARs for port %d, skipping\n", + d->name, port); + return NULL; + } + hwif = ide_find_port_slot(d); if (hwif == NULL) { printk(KERN_ERR "%s: too many IDE interfaces, no room in " -- cgit v1.2.3 From e48905e9cfffd21861c3521d828ae992a53aac67 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:41 +0200 Subject: swarm: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Acked-by: Maciej W. Rozycki Tested-by: Maciej W. Rozycki Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/mips/swarm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index 52fee3d2771a..57a0138d0db6 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -61,6 +61,10 @@ static struct resource swarm_ide_resource = { static struct platform_device *swarm_ide_dev; +static const struct ide_port_info swarm_port_info = { + .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, +}; + /* * swarm_ide_probe - if the board header indicates the existence of * Generic Bus IDE, allocate a HWIF for it. @@ -110,7 +114,6 @@ static int __devinit swarm_ide_probe(struct device *dev) base = ioremap(offset, size); /* Setup MMIO ops. */ - hwif->host_flags = IDE_HFLAG_MMIO; default_hwif_mmiops(hwif); for (i = 0; i <= 7; i++) @@ -125,7 +128,7 @@ static int __devinit swarm_ide_probe(struct device *dev) idx[0] = hwif->index; - ide_device_add(idx, NULL); + ide_device_add(idx, &swarm_port_info); dev_set_drvdata(dev, hwif); -- cgit v1.2.3 From ba1d0de70d64e68f0e035f00dbb041c1e05b49c9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 16 Jul 2008 20:33:41 +0200 Subject: powerpc/ide: remove mpc8xx-ide driver This driver was only used by arch/ppc code and is obsolete now with the move to common arch/powerpc code. [bart: port it over IDE tree, remove leftover 'choice' from Kconfig] Signed-off-by: Arnd Bergmann Acked-by: Kumar Gala Cc: Paul Mackerras Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 40 --- drivers/ide/ppc/Makefile | 1 - drivers/ide/ppc/mpc8xx.c | 844 ----------------------------------------------- 3 files changed, 885 deletions(-) delete mode 100644 drivers/ide/ppc/mpc8xx.c diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 5f4d6ea379f6..21511d47d926 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -929,46 +929,6 @@ config BLK_DEV_PALMCHIP_BK3710 Say Y here if you want to support the onchip IDE controller on the TI DaVinci SoC - -config BLK_DEV_MPC8xx_IDE - tristate "MPC8xx IDE support" - depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE - help - This option provides support for IDE on Motorola MPC8xx Systems. - Please see 'Type of MPC8xx IDE interface' for details. - - If unsure, say N. - -choice - prompt "Type of MPC8xx IDE interface" - depends on BLK_DEV_MPC8xx_IDE - default IDE_8xx_PCCARD - -config IDE_8xx_PCCARD - bool "8xx_PCCARD" - ---help--- - Select how the IDE devices are connected to the MPC8xx system: - - 8xx_PCCARD uses the 8xx internal PCMCIA interface in combination - with a PC Card (e.g. ARGOSY portable Hard Disk Adapter), - ATA PC Card HDDs or ATA PC Flash Cards (example: TQM8xxL - systems) - - 8xx_DIRECT is used for directly connected IDE devices using the 8xx - internal PCMCIA interface (example: IVMS8 systems) - - EXT_DIRECT is used for IDE devices directly connected to the 8xx - bus using some glue logic, but _not_ the 8xx internal - PCMCIA interface (example: IDIF860 systems) - -config IDE_8xx_DIRECT - bool "8xx_DIRECT" - -config IDE_EXT_DIRECT - bool "EXT_DIRECT" - -endchoice - # no isa -> no vlb if ISA && (ALPHA || X86 || MIPS) diff --git a/drivers/ide/ppc/Makefile b/drivers/ide/ppc/Makefile index 65af5848b28c..74e52adcdf4b 100644 --- a/drivers/ide/ppc/Makefile +++ b/drivers/ide/ppc/Makefile @@ -1,3 +1,2 @@ obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o -obj-$(CONFIG_BLK_DEV_MPC8xx_IDE) += mpc8xx.o diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c deleted file mode 100644 index 33bc699814d7..000000000000 --- a/drivers/ide/ppc/mpc8xx.c +++ /dev/null @@ -1,844 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Wolfgang Denk, wd@denx.de - * Modified for direct IDE interface - * by Thomas Lange, thomas@corelatus.com - * Modified for direct IDE interface on 8xx without using the PCMCIA - * controller - * by Steven.Scholz@imc-berlin.de - * Moved out of arch/ppc/kernel/m8xx_setup.c, other minor cleanups - * by Mathew Locke - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "ide-mpc8xx" - -static int identify (volatile u8 *p); -static void print_fixed (volatile u8 *p); -static void print_funcid (int func); -static int check_ide_device (unsigned long base); - -static void ide_interrupt_ack (void *dev); -static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio); - -typedef struct ide_ioport_desc { - unsigned long base_off; /* Offset to PCMCIA memory */ - unsigned long reg_off[IDE_NR_PORTS]; /* controller register offsets */ - int irq; /* IRQ */ -} ide_ioport_desc_t; - -ide_ioport_desc_t ioport_dsc[MAX_HWIFS] = { -#ifdef IDE0_BASE_OFFSET - { IDE0_BASE_OFFSET, - { - IDE0_DATA_REG_OFFSET, - IDE0_ERROR_REG_OFFSET, - IDE0_NSECTOR_REG_OFFSET, - IDE0_SECTOR_REG_OFFSET, - IDE0_LCYL_REG_OFFSET, - IDE0_HCYL_REG_OFFSET, - IDE0_SELECT_REG_OFFSET, - IDE0_STATUS_REG_OFFSET, - IDE0_CONTROL_REG_OFFSET, - IDE0_IRQ_REG_OFFSET, - }, - IDE0_INTERRUPT, - }, -#ifdef IDE1_BASE_OFFSET - { IDE1_BASE_OFFSET, - { - IDE1_DATA_REG_OFFSET, - IDE1_ERROR_REG_OFFSET, - IDE1_NSECTOR_REG_OFFSET, - IDE1_SECTOR_REG_OFFSET, - IDE1_LCYL_REG_OFFSET, - IDE1_HCYL_REG_OFFSET, - IDE1_SELECT_REG_OFFSET, - IDE1_STATUS_REG_OFFSET, - IDE1_CONTROL_REG_OFFSET, - IDE1_IRQ_REG_OFFSET, - }, - IDE1_INTERRUPT, - }, -#endif /* IDE1_BASE_OFFSET */ -#endif /* IDE0_BASE_OFFSET */ -}; - -struct ide_timing ide_pio_clocks[6]; -int hold_time[6] = {30, 20, 15, 10, 10, 10 }; /* PIO Mode 5 with IORDY (nonstandard) */ - -/* - * Warning: only 1 (ONE) PCMCIA slot supported here, - * which must be correctly initialized by the firmware (PPCBoot). - */ -static int _slot_ = -1; /* will be read from PCMCIA registers */ - -/* Make clock cycles and always round up */ -#define PCMCIA_MK_CLKS( t, T ) (( (t) * ((T)/1000000) + 999U ) / 1000U ) - -#define M8XX_PCMCIA_CD2(slot) (0x10000000 >> (slot << 4)) -#define M8XX_PCMCIA_CD1(slot) (0x08000000 >> (slot << 4)) - -/* - * The TQM850L hardware has two pins swapped! Grrrrgh! - */ -#ifdef CONFIG_TQM850L -#define __MY_PCMCIA_GCRX_CXRESET PCMCIA_GCRX_CXOE -#define __MY_PCMCIA_GCRX_CXOE PCMCIA_GCRX_CXRESET -#else -#define __MY_PCMCIA_GCRX_CXRESET PCMCIA_GCRX_CXRESET -#define __MY_PCMCIA_GCRX_CXOE PCMCIA_GCRX_CXOE -#endif - -#if defined(CONFIG_BLK_DEV_MPC8xx_IDE) && defined(CONFIG_IDE_8xx_PCCARD) -#define PCMCIA_SCHLVL IDE0_INTERRUPT /* Status Change Interrupt Level */ -static int pcmcia_schlvl = PCMCIA_SCHLVL; -#endif - -/* - * See include/linux/ide.h for definition of hw_regs_t (p, base) - */ - -/* - * m8xx_ide_init_ports() for a direct IDE interface _using_ - * MPC8xx's internal PCMCIA interface - */ -#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) -static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) -{ - unsigned long *p = hw->io_ports_array; - int i; - - typedef struct { - ulong br; - ulong or; - } pcmcia_win_t; - volatile pcmcia_win_t *win; - volatile pcmconf8xx_t *pcmp; - - uint *pgcrx; - u32 pcmcia_phy_base; - u32 pcmcia_phy_end; - static unsigned long pcmcia_base = 0; - unsigned long base; - - *p = 0; - - pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia)); - - if (!pcmcia_base) { - /* - * Read out PCMCIA registers. Since the reset values - * are undefined, we sure hope that they have been - * set up by firmware - */ - - /* Scan all registers for valid settings */ - pcmcia_phy_base = 0xFFFFFFFF; - pcmcia_phy_end = 0; - /* br0 is start of brX and orX regs */ - win = (pcmcia_win_t *) \ - (&(((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0)); - for (i = 0; i < 8; i++) { - if (win->or & 1) { /* This bank is marked as valid */ - if (win->br < pcmcia_phy_base) { - pcmcia_phy_base = win->br; - } - if ((win->br + PCMCIA_MEM_SIZE) > pcmcia_phy_end) { - pcmcia_phy_end = win->br + PCMCIA_MEM_SIZE; - } - /* Check which slot that has been defined */ - _slot_ = (win->or >> 2) & 1; - - } /* Valid bank */ - win++; - } /* for */ - - printk ("PCMCIA slot %c: phys mem %08x...%08x (size %08x)\n", - 'A' + _slot_, - pcmcia_phy_base, pcmcia_phy_end, - pcmcia_phy_end - pcmcia_phy_base); - - if (!request_mem_region(pcmcia_phy_base, - pcmcia_phy_end - pcmcia_phy_base, - DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - pcmcia_base=(unsigned long)ioremap(pcmcia_phy_base, - pcmcia_phy_end-pcmcia_phy_base); - -#ifdef DEBUG - printk ("PCMCIA virt base: %08lx\n", pcmcia_base); -#endif - /* Compute clock cycles for PIO timings */ - for (i=0; i<6; ++i) { - bd_t *binfo = (bd_t *)__res; - struct ide_timing *t, *n; - - hold_time[i] = - PCMCIA_MK_CLKS (hold_time[i], - binfo->bi_busfreq); - - t = ide_timing_find_mode(XFER_PIO_0 + i); - n = &ide_pio_clocks[i]; - - n->setup = PCMCIA_MK_CLKS(t->setup, binfo->bi_busfreq); - n->active = PCMCIA_MK_CLKS(t->active, binfo->bi_busfreq); - n->cycle = PCMCIA_MK_CLKS(t->cycle, binfo->bi_busfreq); -#if 0 - printk ("PIO mode %d timings: %d/%d/%d => %d/%d/%d\n", - i, - t->setup, t->active, t->cycle, - n->setup, n->active, n->cycle); -#endif - } - } - - if (_slot_ == -1) { - printk ("PCMCIA slot has not been defined! Using A as default\n"); - _slot_ = 0; - } - -#ifdef CONFIG_IDE_8xx_PCCARD - -#ifdef DEBUG - printk ("PIPR = 0x%08X slot %c ==> mask = 0x%X\n", - pcmp->pcmc_pipr, - 'A' + _slot_, - M8XX_PCMCIA_CD1(_slot_) | M8XX_PCMCIA_CD2(_slot_) ); -#endif /* DEBUG */ - - if (pcmp->pcmc_pipr & (M8XX_PCMCIA_CD1(_slot_)|M8XX_PCMCIA_CD2(_slot_))) { - printk ("No card in slot %c: PIPR=%08x\n", - 'A' + _slot_, (u32) pcmp->pcmc_pipr); - return -ENODEV; /* No card in slot */ - } - - check_ide_device (pcmcia_base); - -#endif /* CONFIG_IDE_8xx_PCCARD */ - - base = pcmcia_base + ioport_dsc[data_port].base_off; -#ifdef DEBUG - printk ("base: %08x + %08x = %08x\n", - pcmcia_base, ioport_dsc[data_port].base_off, base); -#endif - - for (i = 0; i < IDE_NR_PORTS; ++i) { -#ifdef DEBUG - printk ("port[%d]: %08x + %08x = %08x\n", - i, - base, - ioport_dsc[data_port].reg_off[i], - i, base + ioport_dsc[data_port].reg_off[i]); -#endif - *p++ = base + ioport_dsc[data_port].reg_off[i]; - } - - hw->irq = ioport_dsc[data_port].irq; - hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack; - -#ifdef CONFIG_IDE_8xx_PCCARD - { - unsigned int reg; - - if (_slot_) - pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcrb; - else - pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcra; - - reg = *pgcrx; - reg |= mk_int_int_mask (pcmcia_schlvl) << 24; - reg |= mk_int_int_mask (pcmcia_schlvl) << 16; - *pgcrx = reg; - } -#endif /* CONFIG_IDE_8xx_PCCARD */ - - /* Enable Harddisk Interrupt, - * and make it edge sensitive - */ - /* (11-18) Set edge detect for irq, no wakeup from low power mode */ - ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |= - (0x80000000 >> ioport_dsc[data_port].irq); - -#ifdef CONFIG_IDE_8xx_PCCARD - /* Make sure we don't get garbage irq */ - ((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pscr = 0xFFFF; - - /* Enable falling edge irq */ - pcmp->pcmc_per = 0x100000 >> (16 * _slot_); -#endif /* CONFIG_IDE_8xx_PCCARD */ - - hw->chipset = ide_generic; - - return 0; -} -#endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */ - -/* - * m8xx_ide_init_ports() for a direct IDE interface _not_ using - * MPC8xx's internal PCMCIA interface - */ -#if defined(CONFIG_IDE_EXT_DIRECT) -static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) -{ - unsigned long *p = hw->io_ports_array; - int i; - - u32 ide_phy_base; - u32 ide_phy_end; - static unsigned long ide_base = 0; - unsigned long base; - - *p = 0; - - if (!ide_base) { - - /* TODO: - * - add code to read ORx, BRx - */ - ide_phy_base = CFG_ATA_BASE_ADDR; - ide_phy_end = CFG_ATA_BASE_ADDR + 0x200; - - printk ("IDE phys mem : %08x...%08x (size %08x)\n", - ide_phy_base, ide_phy_end, - ide_phy_end - ide_phy_base); - - if (!request_mem_region(ide_phy_base, 0x200, DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - ide_base=(unsigned long)ioremap(ide_phy_base, - ide_phy_end-ide_phy_base); - -#ifdef DEBUG - printk ("IDE virt base: %08lx\n", ide_base); -#endif - } - - base = ide_base + ioport_dsc[data_port].base_off; -#ifdef DEBUG - printk ("base: %08x + %08x = %08x\n", - ide_base, ioport_dsc[data_port].base_off, base); -#endif - - for (i = 0; i < IDE_NR_PORTS; ++i) { -#ifdef DEBUG - printk ("port[%d]: %08x + %08x = %08x\n", - i, - base, - ioport_dsc[data_port].reg_off[i], - i, base + ioport_dsc[data_port].reg_off[i]); -#endif - *p++ = base + ioport_dsc[data_port].reg_off[i]; - } - - /* direct connected IDE drive, i.e. external IRQ */ - hw->irq = ioport_dsc[data_port].irq; - hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack; - - /* Enable Harddisk Interrupt, - * and make it edge sensitive - */ - /* (11-18) Set edge detect for irq, no wakeup from low power mode */ - ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |= - (0x80000000 >> ioport_dsc[data_port].irq); - - hw->chipset = ide_generic; - - return 0; -} -#endif /* CONFIG_IDE_8xx_DIRECT */ - - -/* -------------------------------------------------------------------- */ - - -/* PCMCIA Timing */ -#ifndef PCMCIA_SHT -#define PCMCIA_SHT(t) ((t & 0x0F)<<16) /* Strobe Hold Time */ -#define PCMCIA_SST(t) ((t & 0x0F)<<12) /* Strobe Setup Time */ -#define PCMCIA_SL(t) ((t==32) ? 0 : ((t & 0x1F)<<7)) /* Strobe Length */ -#endif - -/* Calculate PIO timings */ -static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ -#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) - volatile pcmconf8xx_t *pcmp; - ulong timing, mask, reg; - - pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia)); - - mask = ~(PCMCIA_SHT(0xFF) | PCMCIA_SST(0xFF) | PCMCIA_SL(0xFF)); - - timing = PCMCIA_SHT(hold_time[pio] ) - | PCMCIA_SST(ide_pio_clocks[pio].setup) - | PCMCIA_SL (ide_pio_clocks[pio].active) - ; - -#if 1 - printk ("Setting timing bits 0x%08lx in PCMCIA controller\n", timing); -#endif - if ((reg = pcmp->pcmc_por0 & mask) != 0) - pcmp->pcmc_por0 = reg | timing; - - if ((reg = pcmp->pcmc_por1 & mask) != 0) - pcmp->pcmc_por1 = reg | timing; - - if ((reg = pcmp->pcmc_por2 & mask) != 0) - pcmp->pcmc_por2 = reg | timing; - - if ((reg = pcmp->pcmc_por3 & mask) != 0) - pcmp->pcmc_por3 = reg | timing; - - if ((reg = pcmp->pcmc_por4 & mask) != 0) - pcmp->pcmc_por4 = reg | timing; - - if ((reg = pcmp->pcmc_por5 & mask) != 0) - pcmp->pcmc_por5 = reg | timing; - - if ((reg = pcmp->pcmc_por6 & mask) != 0) - pcmp->pcmc_por6 = reg | timing; - - if ((reg = pcmp->pcmc_por7 & mask) != 0) - pcmp->pcmc_por7 = reg | timing; - -#elif defined(CONFIG_IDE_EXT_DIRECT) - - printk("%s[%d] %s: not implemented yet!\n", - __FILE__, __LINE__, __func__); -#endif /* defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_PCMCIA */ -} - -static const struct ide_port_ops m8xx_port_ops = { - .set_pio_mode = m8xx_ide_set_pio_mode, -}; - -static void -ide_interrupt_ack (void *dev) -{ -#ifdef CONFIG_IDE_8xx_PCCARD - u_int pscr, pipr; - -#if (PCMCIA_SOCKETS_NO == 2) - u_int _slot_; -#endif - - /* get interrupt sources */ - - pscr = ((volatile immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr; - pipr = ((volatile immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr; - - /* - * report only if both card detect signals are the same - * not too nice done, - * we depend on that CD2 is the bit to the left of CD1... - */ - - if(_slot_==-1){ - printk("PCMCIA slot has not been defined! Using A as default\n"); - _slot_=0; - } - - if(((pipr & M8XX_PCMCIA_CD2(_slot_)) >> 1) ^ - (pipr & M8XX_PCMCIA_CD1(_slot_)) ) { - printk ("card detect interrupt\n"); - } - /* clear the interrupt sources */ - ((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr = pscr; - -#else /* ! CONFIG_IDE_8xx_PCCARD */ - /* - * Only CONFIG_IDE_8xx_PCCARD is using the interrupt of the - * MPC8xx's PCMCIA controller, so there is nothing to be done here - * for CONFIG_IDE_8xx_DIRECT and CONFIG_IDE_EXT_DIRECT. - * The interrupt is handled somewhere else. -- Steven - */ -#endif /* CONFIG_IDE_8xx_PCCARD */ -} - - - -/* - * CIS Tupel codes - */ -#define CISTPL_NULL 0x00 -#define CISTPL_DEVICE 0x01 -#define CISTPL_LONGLINK_CB 0x02 -#define CISTPL_INDIRECT 0x03 -#define CISTPL_CONFIG_CB 0x04 -#define CISTPL_CFTABLE_ENTRY_CB 0x05 -#define CISTPL_LONGLINK_MFC 0x06 -#define CISTPL_BAR 0x07 -#define CISTPL_PWR_MGMNT 0x08 -#define CISTPL_EXTDEVICE 0x09 -#define CISTPL_CHECKSUM 0x10 -#define CISTPL_LONGLINK_A 0x11 -#define CISTPL_LONGLINK_C 0x12 -#define CISTPL_LINKTARGET 0x13 -#define CISTPL_NO_LINK 0x14 -#define CISTPL_VERS_1 0x15 -#define CISTPL_ALTSTR 0x16 -#define CISTPL_DEVICE_A 0x17 -#define CISTPL_JEDEC_C 0x18 -#define CISTPL_JEDEC_A 0x19 -#define CISTPL_CONFIG 0x1a -#define CISTPL_CFTABLE_ENTRY 0x1b -#define CISTPL_DEVICE_OC 0x1c -#define CISTPL_DEVICE_OA 0x1d -#define CISTPL_DEVICE_GEO 0x1e -#define CISTPL_DEVICE_GEO_A 0x1f -#define CISTPL_MANFID 0x20 -#define CISTPL_FUNCID 0x21 -#define CISTPL_FUNCE 0x22 -#define CISTPL_SWIL 0x23 -#define CISTPL_END 0xff - -/* - * CIS Function ID codes - */ -#define CISTPL_FUNCID_MULTI 0x00 -#define CISTPL_FUNCID_MEMORY 0x01 -#define CISTPL_FUNCID_SERIAL 0x02 -#define CISTPL_FUNCID_PARALLEL 0x03 -#define CISTPL_FUNCID_FIXED 0x04 -#define CISTPL_FUNCID_VIDEO 0x05 -#define CISTPL_FUNCID_NETWORK 0x06 -#define CISTPL_FUNCID_AIMS 0x07 -#define CISTPL_FUNCID_SCSI 0x08 - -/* - * Fixed Disk FUNCE codes - */ -#define CISTPL_IDE_INTERFACE 0x01 - -#define CISTPL_FUNCE_IDE_IFACE 0x01 -#define CISTPL_FUNCE_IDE_MASTER 0x02 -#define CISTPL_FUNCE_IDE_SLAVE 0x03 - -/* First feature byte */ -#define CISTPL_IDE_SILICON 0x04 -#define CISTPL_IDE_UNIQUE 0x08 -#define CISTPL_IDE_DUAL 0x10 - -/* Second feature byte */ -#define CISTPL_IDE_HAS_SLEEP 0x01 -#define CISTPL_IDE_HAS_STANDBY 0x02 -#define CISTPL_IDE_HAS_IDLE 0x04 -#define CISTPL_IDE_LOW_POWER 0x08 -#define CISTPL_IDE_REG_INHIBIT 0x10 -#define CISTPL_IDE_HAS_INDEX 0x20 -#define CISTPL_IDE_IOIS16 0x40 - - -/* -------------------------------------------------------------------- */ - - -#define MAX_TUPEL_SZ 512 -#define MAX_FEATURES 4 - -static int check_ide_device (unsigned long base) -{ - volatile u8 *ident = NULL; - volatile u8 *feature_p[MAX_FEATURES]; - volatile u8 *p, *start; - int n_features = 0; - u8 func_id = ~0; - u8 code, len; - unsigned short config_base = 0; - int found = 0; - int i; - -#ifdef DEBUG - printk ("PCMCIA MEM: %08lX\n", base); -#endif - start = p = (volatile u8 *) base; - - while ((p - start) < MAX_TUPEL_SZ) { - - code = *p; p += 2; - - if (code == 0xFF) { /* End of chain */ - break; - } - - len = *p; p += 2; -#ifdef DEBUG_PCMCIA - { volatile u8 *q = p; - printk ("\nTuple code %02x length %d\n\tData:", - code, len); - - for (i = 0; i < len; ++i) { - printk (" %02x", *q); - q+= 2; - } - } -#endif /* DEBUG_PCMCIA */ - switch (code) { - case CISTPL_VERS_1: - ident = p + 4; - break; - case CISTPL_FUNCID: - func_id = *p; - break; - case CISTPL_FUNCE: - if (n_features < MAX_FEATURES) - feature_p[n_features++] = p; - break; - case CISTPL_CONFIG: - config_base = (*(p+6) << 8) + (*(p+4)); - default: - break; - } - p += 2 * len; - } - - found = identify (ident); - - if (func_id != ((u8)~0)) { - print_funcid (func_id); - - if (func_id == CISTPL_FUNCID_FIXED) - found = 1; - else - return (1); /* no disk drive */ - } - - for (i=0; i id_str) { - if (*t == ' ') - *t = '\0'; - else - break; - } - printk ("Card ID: %s\n", id_str); - - for (card=known_cards; *card; ++card) { - if (strcmp(*card, id_str) == 0) { /* found! */ - return (1); - } - } - - return (0); /* don't know */ -} - -static int __init mpc8xx_ide_probe(void) -{ - hw_regs_t hw; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - -#ifdef IDE0_BASE_OFFSET - memset(&hw, 0, sizeof(hw)); - if (!m8xx_ide_init_ports(&hw, 0)) { - ide_hwif_t *hwif = ide_find_port(); - - if (hwif) { - ide_init_port_hw(hwif, &hw); - hwif->pio_mask = ATA_PIO4; - hwif->port_ops = &m8xx_port_ops; - - idx[0] = hwif->index; - } - } -#ifdef IDE1_BASE_OFFSET - memset(&hw, 0, sizeof(hw)); - if (!m8xx_ide_init_ports(&hw, 1)) { - ide_hwif_t *mate = ide_find_port(); - - if (mate) { - ide_init_port_hw(mate, &hw); - mate->pio_mask = ATA_PIO4; - mate->port_ops = &m8xx_port_ops; - - idx[1] = mate->index; - } - } -#endif -#endif - - ide_device_add(idx, NULL); - - return 0; -} - -module_init(mpc8xx_ide_probe); - -MODULE_LICENSE("GPL"); -- cgit v1.2.3 From a698400a1556cf9f0376d1a41e536973dd5c4747 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:41 +0200 Subject: cmd640: fix warm-plug support for the secondary interface Register secondary interface also when user requested not to probe devices. While at it: - remove write-only second_port_toggled variable Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/cmd640.c | 51 ++++++++++++++++++++---------------------------- 1 file changed, 21 insertions(+), 30 deletions(-) diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index baa26a26709a..ab7d7274d8b1 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -687,9 +687,6 @@ static int cmd640x_init_one(unsigned long base, unsigned long ctl) */ static int __init cmd640x_init(void) { -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - int second_port_toggled = 0; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ int second_port_cmd640 = 0, rc; const char *bus_type, *port2; unsigned int index; @@ -778,46 +775,40 @@ static int __init cmd640x_init(void) put_cmd640_reg(CMDTIM, 0); put_cmd640_reg(BRST, 0x40); - cmd_hwif1 = ide_find_port(); + b = get_cmd640_reg(CNTRL); /* * Try to enable the secondary interface, if not already enabled */ - if (cmd_hwif1 && - cmd_hwif1->drives[0].noprobe && cmd_hwif1->drives[1].noprobe) { - port2 = "not probed"; + if (secondary_port_responding()) { + if ((b & CNTRL_ENA_2ND)) { + second_port_cmd640 = 1; + port2 = "okay"; + } else if (cmd640_vlb) { + second_port_cmd640 = 1; + port2 = "alive"; + } else + port2 = "not cmd640"; } else { - b = get_cmd640_reg(CNTRL); + put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */ if (secondary_port_responding()) { - if ((b & CNTRL_ENA_2ND)) { - second_port_cmd640 = 1; - port2 = "okay"; - } else if (cmd640_vlb) { - second_port_cmd640 = 1; - port2 = "alive"; - } else - port2 = "not cmd640"; + second_port_cmd640 = 1; + port2 = "enabled"; } else { - put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */ - if (secondary_port_responding()) { - second_port_cmd640 = 1; -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - second_port_toggled = 1; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - port2 = "enabled"; - } else { - put_cmd640_reg(CNTRL, b); /* restore original setting */ - port2 = "not responding"; - } + put_cmd640_reg(CNTRL, b); /* restore original setting */ + port2 = "not responding"; } } /* * Initialize data for secondary cmd640 port, if enabled */ - if (second_port_cmd640 && cmd_hwif1) { - ide_init_port_hw(cmd_hwif1, &hw[1]); - idx[1] = cmd_hwif1->index; + if (second_port_cmd640) { + cmd_hwif1 = ide_find_port(); + if (cmd_hwif1) { + ide_init_port_hw(cmd_hwif1, &hw[1]); + idx[1] = cmd_hwif1->index; + } } printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n", second_port_cmd640 ? "" : "not ", port2); -- cgit v1.2.3 From e6d95bd14928926d6658b5e4ace905e8b83ed27a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:42 +0200 Subject: ide: ->port_init_devs -> ->init_dev Change ->port_init_devs method to take 'ide_drive_t *' as an argument instead of 'ide_hwif_t *' and rename it to ->init_dev. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 6 +++--- drivers/ide/legacy/ht6560b.c | 8 ++++---- drivers/ide/legacy/ide-4drives.c | 10 ++++------ drivers/ide/legacy/qd65xx.c | 16 ++++++++-------- include/linux/ide.h | 4 ++-- 5 files changed, 21 insertions(+), 23 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 97dda05914a1..c5dc18849303 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1320,10 +1320,10 @@ static void ide_port_init_devices(ide_hwif_t *hwif) drive->unmask = 1; if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) drive->no_unmask = 1; - } - if (port_ops && port_ops->port_init_devs) - port_ops->port_init_devs(hwif); + if (port_ops && port_ops->init_dev) + port_ops->init_dev(drive); + } } static void ide_init_port(ide_hwif_t *hwif, unsigned int port, diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index bd2f579946fa..7bc8fd59ea9e 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -310,16 +310,16 @@ static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio) #endif } -static void __init ht6560b_port_init_devs(ide_hwif_t *hwif) +static void __init ht6560b_init_dev(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; /* Setting default configurations for drives. */ int t = (HT_CONFIG_DEFAULT << 8) | HT_TIMING_DEFAULT; if (hwif->channel) t |= (HT_SECONDARY_IF << 8); - hwif->drives[0].drive_data = t; - hwif->drives[1].drive_data = t; + drive->drive_data = t; } static int probe_ht6560b; @@ -328,7 +328,7 @@ module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); static const struct ide_port_ops ht6560b_port_ops = { - .port_init_devs = ht6560b_port_init_devs, + .init_dev = ht6560b_init_dev, .set_pio_mode = ht6560b_set_pio_mode, .selectproc = ht6560b_selectproc, }; diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c index 5cd6ce537eea..89c8ff0a4d08 100644 --- a/drivers/ide/legacy/ide-4drives.c +++ b/drivers/ide/legacy/ide-4drives.c @@ -11,16 +11,14 @@ static int probe_4drives; module_param_named(probe, probe_4drives, bool, 0); MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port"); -static void ide_4drives_port_init_devs(ide_hwif_t *hwif) +static void ide_4drives_init_dev(ide_drive_t *drive) { - if (hwif->channel) { - hwif->drives[0].select.all ^= 0x20; - hwif->drives[1].select.all ^= 0x20; - } + if (drive->hwif->channel) + drive->select.all ^= 0x20; } static const struct ide_port_ops ide_4drives_port_ops = { - .port_init_devs = ide_4drives_port_init_devs, + .init_dev = ide_4drives_init_dev, }; static const struct ide_port_info ide_4drives_port_info = { diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 63f6c31d16ea..2338f344ea24 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -282,17 +282,18 @@ static int __init qd_testreg(int port) return (readreg != QD_TESTVAL); } -static void __init qd6500_port_init_devs(ide_hwif_t *hwif) +static void __init qd6500_init_dev(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; u8 base = (hwif->config_data & 0xff00) >> 8; u8 config = QD_CONFIG(hwif); - hwif->drives[0].drive_data = QD6500_DEF_DATA; - hwif->drives[1].drive_data = QD6500_DEF_DATA; + drive->drive_data = QD6500_DEF_DATA; } -static void __init qd6580_port_init_devs(ide_hwif_t *hwif) +static void __init qd6580_init_dev(ide_drive_t *drive) { + ide_hwif_t *hwif = drive->hwif; u16 t1, t2; u8 base = (hwif->config_data & 0xff00) >> 8; u8 config = QD_CONFIG(hwif); @@ -303,18 +304,17 @@ static void __init qd6580_port_init_devs(ide_hwif_t *hwif) } else t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA; - hwif->drives[0].drive_data = t1; - hwif->drives[1].drive_data = t2; + drive->drive_data = drive->select.b.unit ? t2 : t1; } static const struct ide_port_ops qd6500_port_ops = { - .port_init_devs = qd6500_port_init_devs, + .init_dev = qd6500_init_dev, .set_pio_mode = qd6500_set_pio_mode, .selectproc = qd65xx_select, }; static const struct ide_port_ops qd6580_port_ops = { - .port_init_devs = qd6580_port_init_devs, + .init_dev = qd6580_init_dev, .set_pio_mode = qd6580_set_pio_mode, .selectproc = qd65xx_select, }; diff --git a/include/linux/ide.h b/include/linux/ide.h index a6a2eccb6526..f9cbe9350cad 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -405,8 +405,8 @@ typedef struct ide_drive_s { struct ide_port_info; struct ide_port_ops { - /* host specific initialization of devices on a port */ - void (*port_init_devs)(struct hwif_s *); + /* host specific initialization of a device */ + void (*init_dev)(ide_drive_t *); /* routine to program host for PIO mode */ void (*set_pio_mode)(ide_drive_t *, const u8); /* routine to program host for DMA mode */ -- cgit v1.2.3 From b48c89a9699f451e4e236fa7313461281c00e69b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:42 +0200 Subject: cmd640: add ->init_dev method Convert the driver to use ->init_dev method instead of open-coding devices init in cmd640x_init(). While at it: - fix printk()-s to use KERN_INFO level instead of the default KERN_ERR - use DRV_NAME define in printk()-s - set proper ->pio_mask also for CONFIG_BLK_DEV_CMD640_ENHANCED=n There should be no functional changes caused by this patch (except fixing printk()-s levels). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/cmd640.c | 72 ++++++++++++++++++++---------------------------- 1 file changed, 30 insertions(+), 42 deletions(-) diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index ab7d7274d8b1..1ad1e23e3105 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -611,11 +611,40 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) display_clocks(index); } +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + +static void cmd640_init_dev(ide_drive_t *drive) +{ + unsigned int i = drive->hwif->channel * 2 + drive->select.b.unit; + +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + /* + * Reset timing to the slowest speed and turn off prefetch. + * This way, the drive identify code has a better chance. + */ + setup_counts[i] = 4; /* max possible */ + active_counts[i] = 16; /* max possible */ + recovery_counts[i] = 16; /* max possible */ + program_drive_counts(drive, i); + set_prefetch_mode(drive, i, 0); + printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch cleared\n", i); +#else + /* + * Set the drive unmask flags to match the prefetch setting. + */ + check_prefetch(drive, i); + printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n", + i, drive->no_io_32bit ? "off" : "on"); +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ +} + static const struct ide_port_ops cmd640_port_ops = { + .init_dev = cmd640_init_dev, +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED .set_pio_mode = cmd640_set_pio_mode, +#endif }; -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ static int pci_conf1(void) { @@ -658,10 +687,8 @@ static const struct ide_port_info cmd640_port_info __initdata = { IDE_HFLAG_NO_DMA | IDE_HFLAG_ABUSE_PREFETCH | IDE_HFLAG_ABUSE_FAST_DEVSEL, -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED .port_ops = &cmd640_port_ops, .pio_mask = ATA_PIO5, -#endif }; static int cmd640x_init_one(unsigned long base, unsigned long ctl) @@ -689,7 +716,6 @@ static int __init cmd640x_init(void) { int second_port_cmd640 = 0, rc; const char *bus_type, *port2; - unsigned int index; u8 b, cfr; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw[2]; @@ -813,44 +839,6 @@ static int __init cmd640x_init(void) printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n", second_port_cmd640 ? "" : "not ", port2); - /* - * Establish initial timings/prefetch for all drives. - * Do not unnecessarily disturb any prior BIOS setup of these. - */ - for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) { - ide_drive_t *drive; - - if (index > 1) { - if (cmd_hwif1 == NULL) - continue; - drive = &cmd_hwif1->drives[index & 1]; - } else { - if (cmd_hwif0 == NULL) - continue; - drive = &cmd_hwif0->drives[index & 1]; - } - -#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - /* - * Reset timing to the slowest speed and turn off prefetch. - * This way, the drive identify code has a better chance. - */ - setup_counts [index] = 4; /* max possible */ - active_counts [index] = 16; /* max possible */ - recovery_counts [index] = 16; /* max possible */ - program_drive_counts(drive, index); - set_prefetch_mode(drive, index, 0); - printk("cmd640: drive%d timings/prefetch cleared\n", index); -#else - /* - * Set the drive unmask flags to match the prefetch setting - */ - check_prefetch(drive, index); - printk("cmd640: drive%d timings/prefetch(%s) preserved\n", - index, drive->no_io_32bit ? "off" : "on"); -#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ - } - #ifdef CMD640_DUMP_REGS cmd640_dump_regs(); #endif -- cgit v1.2.3 From 9a5ae1faaaf43933dee48c223b193d5e1c4b8b0c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:42 +0200 Subject: rapide: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/rapide.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index 1747b2358775..bb081ad53f31 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -11,6 +11,10 @@ #include +static struct const ide_port_info rapide_port_info = { + .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, +}; + static void rapide_setup_ports(hw_regs_t *hw, void __iomem *base, void __iomem *ctrl, unsigned int sz, int irq) { @@ -53,12 +57,11 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) ide_init_port_hw(hwif, &hw); - hwif->host_flags = IDE_HFLAG_MMIO; default_hwif_mmiops(hwif); idx[0] = hwif->index; - ide_device_add(idx, NULL); + ide_device_add(idx, &rapide_port_info); ecard_set_drvdata(ec, hwif); goto out; -- cgit v1.2.3 From f81eb80bbb949f9498980c785ef7dd4c994a4909 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:42 +0200 Subject: ide-h8300: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/h8300/ide-h8300.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index dfce105bae64..ff6a98afefb7 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -176,6 +176,10 @@ static inline void hwif_setup(ide_hwif_t *hwif) hwif->output_data = h8300_output_data; } +static const struct ide_port_info h8300_port_info = { + .host_flags = IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA, +}; + static int __init h8300_ide_init(void) { hw_regs_t hw; @@ -201,12 +205,11 @@ static int __init h8300_ide_init(void) index = hwif->index; ide_init_port_hw(hwif, &hw); hwif_setup(hwif); - hwif->host_flags = IDE_HFLAG_NO_IO_32BIT; printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index); idx[0] = index; - ide_device_add(idx, NULL); + ide_device_add(idx, &h8300_port_info); return 0; -- cgit v1.2.3 From 7b60fa16ca50b0f8cb9d007faee0dff71b397fb8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:42 +0200 Subject: ide_platform: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/ide_platform.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index d3bc3f24e05d..a249562b34b5 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -44,6 +44,10 @@ static void __devinit plat_ide_setup_ports(hw_regs_t *hw, hw->chipset = ide_generic; } +static const struct ide_port_info platform_ide_port_info = { + .host_flags = IDE_HFLAG_NO_DMA, +}; + static int __devinit plat_ide_probe(struct platform_device *pdev) { struct resource *res_base, *res_alt, *res_irq; @@ -54,6 +58,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) int ret = 0; int mmio = 0; hw_regs_t hw; + struct ide_port_info d = platform_ide_port_info; pdata = pdev->dev.platform_data; @@ -102,13 +107,13 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) ide_init_port_hw(hwif, &hw); if (mmio) { - hwif->host_flags = IDE_HFLAG_MMIO; + d.host_flags |= IDE_HFLAG_MMIO; default_hwif_mmiops(hwif); } idx[0] = hwif->index; - ide_device_add(idx, NULL); + ide_device_add(idx, &d); platform_set_drvdata(pdev, hwif); -- cgit v1.2.3 From eb3aff5530d22eb4be0a99c9d39c9ffde7b9891a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:42 +0200 Subject: ide: print message on error in ide_find_port_slot() * Add DRV_NAME define to ide-h8300.c. * Fix ide-h8300.c, swarm.c and sgiioc4.c to set .name field in struct ide_port_info to DRV_NAME, then convert these host drivers to use ide_find_port_slot() instead of ide_find_port(). * Print message on error in ide_find_port_slot(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/h8300/ide-h8300.c | 8 ++++---- drivers/ide/ide-probe.c | 3 +++ drivers/ide/mips/swarm.c | 7 +++---- drivers/ide/pci/scc_pata.c | 7 ++----- drivers/ide/pci/sgiioc4.c | 8 +++----- drivers/ide/setup-pci.c | 5 +---- 6 files changed, 16 insertions(+), 22 deletions(-) diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index ff6a98afefb7..c445298f7eb8 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -8,6 +8,8 @@ #include #include +#define DRV_NAME "ide-h8300" + #define bswap(d) \ ({ \ u16 r; \ @@ -196,11 +198,9 @@ static int __init h8300_ide_init(void) hw_setup(&hw); - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR "ide-h8300: IDE I/F register failed\n"); + hwif = ide_find_port_slot(&h8300_port_info); + if (hwif == NULL) return -ENOENT; - } index = hwif->index; ide_init_port_hw(hwif, &hw); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index c5dc18849303..235ebdb29b28 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1490,6 +1490,9 @@ ide_hwif_t *ide_find_port_slot(const struct ide_port_info *d) } } + printk(KERN_ERR "%s: no free slot for interface\n", + d ? d->name : "ide"); + return NULL; out_found: diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index 57a0138d0db6..bae92acea343 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -62,6 +62,7 @@ static struct resource swarm_ide_resource = { static struct platform_device *swarm_ide_dev; static const struct ide_port_info swarm_port_info = { + .name = DRV_NAME, .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, }; @@ -81,11 +82,9 @@ static int __devinit swarm_ide_probe(struct device *dev) if (!SIBYTE_HAVE_IDE) return -ENODEV; - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR DRV_NAME ": no free slot for interface\n"); + hwif = ide_find_port_slot(&swarm_port_info); + if (hwif == NULL) return -ENOMEM; - } base = ioremap(A_IO_EXT_BASE, 0x800); offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 71bff3131b96..789c66dfbde5 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -558,12 +558,9 @@ static int scc_ide_setup_pci_device(struct pci_dev *dev, u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; int i; - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR "%s: too many IDE interfaces, " - "no room in table\n", SCC_PATA_NAME); + hwif = ide_find_port_slot(d); + if (hwif == NULL) return -ENOMEM; - } memset(&hw, 0, sizeof(hw)); for (i = 0; i <= 8; i++) diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index dd0d0f73ab16..be73acb2080d 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -568,6 +568,7 @@ static const struct ide_dma_ops sgiioc4_dma_ops = { }; static const struct ide_port_info sgiioc4_port_info __devinitdata = { + .name = DRV_NAME, .chipset = ide_pci, .init_dma = ide_dma_sgiioc4, .port_ops = &sgiioc4_port_ops, @@ -587,12 +588,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) hw_regs_t hw; struct ide_port_info d = sgiioc4_port_info; - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR "%s: too many IDE interfaces, no room in table\n", - DRV_NAME); + hwif = ide_find_port_slot(&d); + if (hwif == NULL) return -ENOMEM; - } /* Get the CmdBlk and CtrlBlk Base Registers */ bar0 = pci_resource_start(dev, 0); diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 166211f53f17..4321d20fe874 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -332,11 +332,8 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, } hwif = ide_find_port_slot(d); - if (hwif == NULL) { - printk(KERN_ERR "%s: too many IDE interfaces, no room in " - "table\n", d->name); + if (hwif == NULL) return NULL; - } memset(&hw, 0, sizeof(hw)); hw.irq = irq; -- cgit v1.2.3 From 740c397cc64272917a4c4c283649579d2044a836 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:43 +0200 Subject: ide-h8300: print driver banner message early Print driver banner message early and without interface number. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/h8300/ide-h8300.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index c445298f7eb8..20fad6d542cc 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -189,6 +189,8 @@ static int __init h8300_ide_init(void) int index; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + printk(KERN_INFO DRV_NAME ": H8/300 generic IDE interface\n"); + if (!request_region(CONFIG_H8300_IDE_BASE, H8300_IDE_GAP*8, "ide-h8300")) goto out_busy; if (!request_region(CONFIG_H8300_IDE_ALT, H8300_IDE_GAP, "ide-h8300")) { @@ -205,7 +207,6 @@ static int __init h8300_ide_init(void) index = hwif->index; ide_init_port_hw(hwif, &hw); hwif_setup(hwif); - printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index); idx[0] = index; -- cgit v1.2.3 From e193c3e141df4b536ed077b29c83a96768333607 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:43 +0200 Subject: ide-pnp: print driver banner message early Print driver banner message early and without interface number. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-pnp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index fc1e10c9d1cd..03f2ef5470a3 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -33,6 +33,8 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) ide_hwif_t *hwif; unsigned long base, ctl; + printk(KERN_INFO DRV_NAME ": generic PnP IDE interface\n"); + if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0))) return -1; @@ -64,7 +66,6 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) ide_init_port_hw(hwif, &hw); - printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); pnp_set_drvdata(dev, hwif); ide_device_add(idx, NULL); -- cgit v1.2.3 From 07fe69d5d0b6e476cecaf75e81c0c6093571087b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:43 +0200 Subject: ide: allow any command requesting DMA data phase for HDIO_DRIVE_TASKFILE Allow any command requesting DMA data phase for HDIO_DRIVE_TASKFILE ioctl and remove no longer needed task_dma_ok() Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-taskfile.c | 22 +--------------------- 1 file changed, 1 insertion(+), 21 deletions(-) diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index cf55a48a7dd2..994a5161c040 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -62,25 +62,6 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) return ide_raw_taskfile(drive, &args, buf, 1); } -static int inline task_dma_ok(ide_task_t *task) -{ - if (blk_fs_request(task->rq) || (task->tf_flags & IDE_TFLAG_FLAGGED)) - return 1; - - switch (task->tf.command) { - case WIN_WRITEDMA_ONCE: - case WIN_WRITEDMA: - case WIN_WRITEDMA_EXT: - case WIN_READDMA_ONCE: - case WIN_READDMA: - case WIN_READDMA_EXT: - case WIN_IDENTIFY_DMA: - return 1; - } - - return 0; -} - static ide_startstop_t task_no_data_intr(ide_drive_t *); static ide_startstop_t set_geometry_intr(ide_drive_t *); static ide_startstop_t recal_intr(ide_drive_t *); @@ -139,8 +120,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) WAIT_WORSTCASE, NULL); return ide_started; default: - if (task_dma_ok(task) == 0 || drive->using_dma == 0 || - dma_ops->dma_setup(drive)) + if (drive->using_dma == 0 || dma_ops->dma_setup(drive)) return ide_stopped; dma_ops->dma_exec_cmd(drive, tf->command); dma_ops->dma_start(drive); -- cgit v1.2.3 From 605cfe8270cb182f494575c5a608404bb19fdfc5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:43 +0200 Subject: ide: remove superfluous BUG_ON() from set_geometry_intr() ide_set_handler() bugs on ->handler == NULL so no need to do it in set_geometry_intr(). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-taskfile.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 994a5161c040..0d0bf292c418 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -163,7 +163,6 @@ static ide_startstop_t set_geometry_intr(ide_drive_t *drive) if (stat & (ERR_STAT|DRQ_STAT)) return ide_error(drive, "set_geometry_intr", stat); - BUG_ON(HWGROUP(drive)->handler != NULL); ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL); return ide_started; } -- cgit v1.2.3 From 61729415e64a1149d4eb36c3fac26a28728ad1d7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:43 +0200 Subject: ide: remove needless includes from ide.c Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 9240888e5efd..90ae00d4aaf5 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -50,29 +50,16 @@ #include #include #include -#include -#include #include #include #include #include -#include #include #include #include -#include #include #include -#include -#include -#include #include -#include - -#include -#include -#include -#include /* default maximum number of failures */ -- cgit v1.2.3 From ad15e9fc8913b704978ffdda7d1f31c79ed6814d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:44 +0200 Subject: ide: remove needless includes from ide-taskfile.c (take 2) v2: On Sunday 15 June 2008, Geert Uytterhoeven wrote: > As ide-taskfile.c uses scatterlists, it should include . (v1 broke IDE build on m68k, thanks to Geert for finding the bug) Cc: Geert Uytterhoeven Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-taskfile.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 0d0bf292c418..1fbdb746dc88 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -8,28 +8,18 @@ * The big the bad and the ugly. */ -#include #include #include #include -#include -#include #include #include -#include #include -#include -#include #include -#include #include #include #include -#include #include -#include -#include #include #include -- cgit v1.2.3 From ff23712e791fd80f3b088d5e1c5733c0944cfe64 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:44 +0200 Subject: ide: remove needless includes from setup-pci.c (take 2) v2: * sparc build fix. (From Stephen Rothwell) Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/setup-pci.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 4321d20fe874..65fc08b6b6d0 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -6,19 +6,15 @@ * May be copied or modified under the terms of the GNU General Public License */ -#include #include #include #include #include -#include -#include #include #include #include #include -#include /** * ide_setup_pci_baseregs - place a PCI IDE controller native -- cgit v1.2.3 From 47bc7e7425d198ad1f8c4597b0bf28619fcce0fd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:44 +0200 Subject: rapide: fix rapide_probe() return value Return -ENOENT on ide_find_port() failure. While at it: - Cleanup rapide_probe() a bit. Cc: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/rapide.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index bb081ad53f31..43057e0303c8 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -48,24 +48,26 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) goto release; } - hwif = ide_find_port(); - if (hwif) { - memset(&hw, 0, sizeof(hw)); - rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq); - hw.chipset = ide_generic; - hw.dev = &ec->dev; + memset(&hw, 0, sizeof(hw)); + rapide_setup_ports(&hw, base, base + 0x818, 1 << 6, ec->irq); + hw.chipset = ide_generic; + hw.dev = &ec->dev; - ide_init_port_hw(hwif, &hw); + hwif = ide_find_port(); + if (hwif == NULL) { + ret = -ENOENT; + goto release; + } - default_hwif_mmiops(hwif); + ide_init_port_hw(hwif, &hw); + default_hwif_mmiops(hwif); - idx[0] = hwif->index; + idx[0] = hwif->index; - ide_device_add(idx, &rapide_port_info); + ide_device_add(idx, &rapide_port_info); - ecard_set_drvdata(ec, hwif); - goto out; - } + ecard_set_drvdata(ec, hwif); + goto out; release: ecard_release_resources(ec); -- cgit v1.2.3 From 67717e224181527987cce800fa2ddb5c8c1e9315 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:44 +0200 Subject: icside: always try to probe first interface Try to probe first interface even if ide_hwifs[]'s slot for the second interface cannot be obtained. While at it: - Add DRV_NAME define and use it for request_dma() instead of hwif->name. Cc: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/icside.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index c8d860060329..52f58c885783 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -21,6 +21,8 @@ #include #include +#define DRV_NAME "icside" + #define ICS_IDENT_OFFSET 0x2280 #define ICS_ARCIN_V5_INTRSTAT 0x0000 @@ -546,27 +548,27 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) ide_init_port_hw(hwif, &hw[0]); default_hwif_mmiops(hwif); + idx[0] = hwif->index; + mate = ide_find_port(); - if (mate == NULL) - return -ENODEV; + if (mate) { + ide_init_port_hw(mate, &hw[1]); + default_hwif_mmiops(mate); - ide_init_port_hw(mate, &hw[1]); - default_hwif_mmiops(mate); + idx[1] = mate->index; + } state->hwif[0] = hwif; state->hwif[1] = mate; ecard_set_drvdata(ec, state); - if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) { + if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) { d.init_dma = icside_dma_init; d.port_ops = &icside_v6_port_ops; d.dma_ops = NULL; } - idx[0] = hwif->index; - idx[1] = mate->index; - ide_device_add(idx, &d); return 0; -- cgit v1.2.3 From cb8ea0929c9cb899d61c4e155aace0b34d8cffe3 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:44 +0200 Subject: swarm: call ide_find_port_slot() later Move ide_find_port_slot() call closer to ide_device_add(). This is basically a preparation for the future changes. Cc: Maciej W. Rozycki Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/mips/swarm.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index bae92acea343..9f1212cc4aed 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -82,10 +82,6 @@ static int __devinit swarm_ide_probe(struct device *dev) if (!SIBYTE_HAVE_IDE) return -ENODEV; - hwif = ide_find_port_slot(&swarm_port_info); - if (hwif == NULL) - return -ENOMEM; - base = ioremap(A_IO_EXT_BASE, 0x800); offset = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_START_ADDR, IDE_CS)); size = __raw_readq(base + R_IO_EXT_REG(R_IO_EXT_MULT_SIZE, IDE_CS)); @@ -112,9 +108,6 @@ static int __devinit swarm_ide_probe(struct device *dev) base = ioremap(offset, size); - /* Setup MMIO ops. */ - default_hwif_mmiops(hwif); - for (i = 0; i <= 7; i++) hw.io_ports_array[i] = (unsigned long)(base + ((0x1f0 + i) << 5)); @@ -123,8 +116,15 @@ static int __devinit swarm_ide_probe(struct device *dev) hw.irq = K_INT_GB_IDE; hw.chipset = ide_generic; + hwif = ide_find_port_slot(&swarm_port_info); + if (hwif == NULL) + goto err; + ide_init_port_hw(hwif, &hw); + /* Setup MMIO ops. */ + default_hwif_mmiops(hwif); + idx[0] = hwif->index; ide_device_add(idx, &swarm_port_info); @@ -132,6 +132,10 @@ static int __devinit swarm_ide_probe(struct device *dev) dev_set_drvdata(dev, hwif); return 0; +err: + release_resource(&swarm_ide_resource); + iounmap(base); + return -ENOMEM; } static struct device_driver swarm_ide_driver = { -- cgit v1.2.3 From ce30e4015954e281f682aa8d158a47885d8e1262 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 16 Jul 2008 20:33:44 +0200 Subject: sgiioc4: call ide_find_port_slot() later Move ide_find_port_slot() call closer to ide_device_add(). This is basically a preparation for the future changes. Cc: Jeremy Higdon Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/sgiioc4.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index be73acb2080d..c79ff5b41088 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -588,10 +588,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) hw_regs_t hw; struct ide_port_info d = sgiioc4_port_info; - hwif = ide_find_port_slot(&d); - if (hwif == NULL) - return -ENOMEM; - /* Get the CmdBlk and CtrlBlk Base Registers */ bar0 = pci_resource_start(dev, 0); virt_base = ioremap(bar0, pci_resource_len(dev, 0)); @@ -621,6 +617,11 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) hw.irq = dev->irq; hw.chipset = ide_pci; hw.dev = &dev->dev; + + hwif = ide_find_port_slot(&d); + if (hwif == NULL) + goto err; + ide_init_port_hw(hwif, &hw); /* The IOC4 uses MMIO rather than Port IO. */ @@ -637,6 +638,10 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) return -EIO; return 0; +err: + release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE); + iounmap(virt_base); + return -ENOMEM; } static unsigned int __devinit -- cgit v1.2.3 From af6765ce9f535f20e6f9975269660fe49594745a Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:45 +0200 Subject: ide-cd: remove wait-for-idle-controller bit in cdrom_start_packet_command This is done in the request issue path anyway. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index e12d60278210..eb4b27548caf 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -517,14 +517,9 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive, int xferlen, ide_handler_t *handler) { - ide_startstop_t startstop; struct cdrom_info *info = drive->driver_data; ide_hwif_t *hwif = drive->hwif; - /* wait for the controller to be idle */ - if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY)) - return startstop; - /* FIXME: for Virtual DMA we must check harder */ if (info->dma) info->dma = !hwif->dma_ops->dma_setup(drive); -- cgit v1.2.3 From ae8789f034ffa077105575817ec0cc581fd18d83 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:45 +0200 Subject: ide-cd: remove ide_cd_drain_data and ide_cd_pad_transfer Use the generic ide_pad_transfer() helper instead. [bart: fixup ide_cd_drain_data() -> ide_pad_transfer() conversion] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 33 ++++----------------------------- 1 file changed, 4 insertions(+), 29 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index eb4b27548caf..789b19cf5e55 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -598,28 +598,6 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive, return ide_started; } -/* - * Block read functions. - */ -static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len) -{ - while (len > 0) { - int dum = 0; - xf(drive, NULL, &dum, sizeof(dum)); - len -= sizeof(dum); - } -} - -static void ide_cd_drain_data(ide_drive_t *drive, int nsects) -{ - while (nsects > 0) { - static char dum[SECTOR_SIZE]; - - drive->hwif->input_data(drive, NULL, dum, sizeof(dum)); - nsects--; - } -} - /* * Check the contents of the interrupt reason register from the cdrom * and attempt to recover if there are problems. Returns 0 if everything's @@ -635,15 +613,12 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq, if (ireason == (!rw << 1)) return 0; else if (ireason == (rw << 1)) { - ide_hwif_t *hwif = drive->hwif; - xfer_func_t *xf; /* whoops... */ printk(KERN_ERR "%s: %s: wrong transfer direction!\n", drive->name, __func__); - xf = rw ? hwif->output_data : hwif->input_data; - ide_cd_pad_transfer(drive, xf, len); + ide_pad_transfer(drive, rw, len); } else if (rw == 0 && ireason == 1) { /* * Some drives (ASUS) seem to tell us that status info is @@ -1006,7 +981,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) - bio_cur_sectors(rq->bio), thislen >> 9); if (nskip > 0) { - ide_cd_drain_data(drive, nskip); + ide_pad_transfer(drive, write, nskip << 9); rq->current_nr_sectors -= nskip; thislen -= (nskip << 9); } @@ -1043,7 +1018,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) * If the buffers are full, pipe the rest into * oblivion. */ - ide_cd_drain_data(drive, thislen >> 9); + ide_pad_transfer(drive, 0, thislen); else { printk(KERN_ERR "%s: confused, missing data\n", drive->name); @@ -1091,7 +1066,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) /* pad, if necessary */ if (!blk_fs_request(rq) && len > 0) - ide_cd_pad_transfer(drive, xferfunc, len); + ide_pad_transfer(drive, write, len); if (blk_pc_request(rq)) { timeout = rq->timeout; -- cgit v1.2.3 From ab9d6e3374d938cf3d941fbed5ba32a19ad263b8 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:45 +0200 Subject: ide-cd: ide_do_rw_cdrom: add the catch-all bad request case to the if-else block There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 789b19cf5e55..6ade498cd2fe 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1235,11 +1235,11 @@ static ide_startstop_t ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, /* right now this can only be a reset... */ cdrom_end_request(drive, 1); return ide_stopped; + } else { + blk_dump_rq_flags(rq, "ide-cd bad flags"); + cdrom_end_request(drive, 0); + return ide_stopped; } - - blk_dump_rq_flags(rq, "ide-cd bad flags"); - cdrom_end_request(drive, 0); - return ide_stopped; } -- cgit v1.2.3 From 8ea1d17b962c35401fe26428e25c4652023e2652 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:45 +0200 Subject: ide-cd: cdrom_start_seek: remove unused argument block There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 6ade498cd2fe..ff98222ece01 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -753,7 +753,7 @@ static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr); } -static ide_startstop_t cdrom_start_seek(ide_drive_t *drive, unsigned int block) +static ide_startstop_t cdrom_start_seek(ide_drive_t *drive) { struct cdrom_info *info = drive->driver_data; @@ -1223,7 +1223,7 @@ static ide_startstop_t ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, IDE_LARGE_SEEK(info->last_block, block, IDECD_SEEK_THRESHOLD) && drive->dsc_overlap) - action = cdrom_start_seek(drive, block); + action = cdrom_start_seek(drive); else action = cdrom_start_rw(drive, rq); info->last_block = block; -- cgit v1.2.3 From 99384aeafe3a78d8a2e66b09b67aa6a219cd7897 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:45 +0200 Subject: ide-cd: mv ide_do_rw_cdrom ide_cd_do_request There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index ff98222ece01..a9be4bf87dd5 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1197,7 +1197,7 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) /* * cdrom driver request routine. */ -static ide_startstop_t ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq, +static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, sector_t block) { ide_startstop_t action; @@ -1936,7 +1936,7 @@ static ide_driver_t ide_cdrom_driver = { .version = IDECD_VERSION, .media = ide_cdrom, .supports_dsc_overlap = 1, - .do_request = ide_do_rw_cdrom, + .do_request = ide_cd_do_request, .end_request = ide_end_request, .error = __ide_error, .abort = __ide_abort, -- cgit v1.2.3 From b6ca440a8ff15e12478ea6f026a52970e7a0c54c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:46 +0200 Subject: ide-cd: simplify request issuing path Call cdrom_start_packet_command() only from the ->do_request() routine. As a nice side effect, this improves code readability a bit. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 39 +++++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 18 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index a9be4bf87dd5..b61ce5ee08e2 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -753,14 +753,12 @@ static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr); } -static ide_startstop_t cdrom_start_seek(ide_drive_t *drive) +static void cdrom_start_seek(ide_drive_t *drive) { struct cdrom_info *info = drive->driver_data; info->dma = 0; info->start_seek = jiffies; - return cdrom_start_packet_command(drive, 0, - cdrom_start_seek_continuation); } /* @@ -1135,8 +1133,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq) if (write) cd->devinfo.media_written = 1; - /* start sending the read/write request to the drive */ - return cdrom_start_packet_command(drive, 32768, cdrom_start_rw_cont); + return ide_started; } static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive) @@ -1149,7 +1146,7 @@ static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive) return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr); } -static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) +static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) { struct cdrom_info *info = drive->driver_data; @@ -1188,10 +1185,6 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) ((unsigned long)current->stack & stack_mask))) info->dma = 0; } - - /* start sending the command to the drive */ - return cdrom_start_packet_command(drive, rq->data_len, - cdrom_do_newpc_cont); } /* @@ -1200,8 +1193,9 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, sector_t block) { - ide_startstop_t action; struct cdrom_info *info = drive->driver_data; + ide_handler_t *fn; + int xferlen; if (blk_fs_request(rq)) { if (info->cd_flags & IDE_CD_FLAG_SEEKING) { @@ -1221,16 +1215,23 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, } if (rq_data_dir(rq) == READ && IDE_LARGE_SEEK(info->last_block, block, - IDECD_SEEK_THRESHOLD) && - drive->dsc_overlap) - action = cdrom_start_seek(drive); - else - action = cdrom_start_rw(drive, rq); + IDECD_SEEK_THRESHOLD) && + drive->dsc_overlap) { + xferlen = 0; + fn = cdrom_start_seek_continuation; + cdrom_start_seek(drive); + } else { + xferlen = 32768; + fn = cdrom_start_rw_cont; + if (cdrom_start_rw(drive, rq) == ide_stopped) + return ide_stopped; + } info->last_block = block; - return action; } else if (blk_sense_request(rq) || blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) { - return cdrom_do_block_pc(drive, rq); + xferlen = rq->data_len; + fn = cdrom_do_newpc_cont; + cdrom_do_block_pc(drive, rq); } else if (blk_special_request(rq)) { /* right now this can only be a reset... */ cdrom_end_request(drive, 1); @@ -1240,6 +1241,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, cdrom_end_request(drive, 0); return ide_stopped; } + + return cdrom_start_packet_command(drive, xferlen, fn); } -- cgit v1.2.3 From 4b01fcbbe69bba34a8494fca6376ac0804f0f51d Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:46 +0200 Subject: ide-cd: fold cdrom_start_seek into ide_cd_do_request Do what the compiler does anyway: inline a function that is used only once. This saves us the overhead of a function call and the function is small enough to be embedded in the callsite anyways. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index b61ce5ee08e2..66d82c1b16eb 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -753,14 +753,6 @@ static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr); } -static void cdrom_start_seek(ide_drive_t *drive) -{ - struct cdrom_info *info = drive->driver_data; - - info->dma = 0; - info->start_seek = jiffies; -} - /* * Fix up a possibly partially-processed request so that we can start it over * entirely, or even put it back on the request queue. @@ -1219,7 +1211,8 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, drive->dsc_overlap) { xferlen = 0; fn = cdrom_start_seek_continuation; - cdrom_start_seek(drive); + info->dma = 0; + info->start_seek = jiffies; } else { xferlen = 32768; fn = cdrom_start_rw_cont; -- cgit v1.2.3 From e529c6087a845e64a6a36a2d17b8754b20bc7c0d Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:46 +0200 Subject: ide-cd: move request prep from cdrom_start_seek_continuation to rq issue path ... by factoring out the rq preparation code into a separate function called in the request routine. As a nice side effect, this minimizes the IRQ handler execution time. There should be no functionality change resulting from this patch. [bart: s/HWGROUP()/drive->hwif->hwgroup/ and remove extra newlines] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 66d82c1b16eb..275d5ba12027 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -738,9 +738,8 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive) return ide_stopped; } -static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) +static void ide_cd_prepare_seek_request(ide_drive_t *drive, struct request *rq) { - struct request *rq = HWGROUP(drive)->rq; sector_t frame = rq->sector; sector_div(frame, queue_hardsect_size(drive->queue) >> SECTOR_BITS); @@ -750,6 +749,12 @@ static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) put_unaligned(cpu_to_be32(frame), (unsigned int *) &rq->cmd[2]); rq->timeout = ATAPI_WAIT_PC; +} + +static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive) +{ + struct request *rq = drive->hwif->hwgroup->rq; + return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr); } @@ -1211,8 +1216,11 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, drive->dsc_overlap) { xferlen = 0; fn = cdrom_start_seek_continuation; + info->dma = 0; info->start_seek = jiffies; + + ide_cd_prepare_seek_request(drive, rq); } else { xferlen = 32768; fn = cdrom_start_rw_cont; -- cgit v1.2.3 From 90eb808e0fd3cbda8a8b085238930c533f603642 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:46 +0200 Subject: ide-cd: move request prep from cdrom_start_rw_cont to rq issue path ... by factoring out the rq preparation code into a separate function called in the request routine. As a nice side effect, this minimizes the IRQ handler execution time. There should be no functionality change resulting from this patch. [bart: s/HWGROUP()/drive->hwif->hwgroup/ and remove extra newline] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 275d5ba12027..9e593cebc00c 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -666,16 +666,9 @@ static int ide_cd_check_transfer_size(ide_drive_t *drive, int len) static ide_startstop_t cdrom_newpc_intr(ide_drive_t *); -/* - * Routine to send a read/write packet command to the drive. This is usually - * called directly from cdrom_start_{read,write}(). However, for drq_interrupt - * devices, it is called from an interrupt when the drive is ready to accept - * the command. - */ -static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) +static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive, + struct request *rq) { - struct request *rq = HWGROUP(drive)->rq; - if (rq_data_dir(rq) == READ) { unsigned short sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS; @@ -712,6 +705,19 @@ static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) /* set up the command */ rq->timeout = ATAPI_WAIT_PC; + return ide_started; +} + +/* + * Routine to send a read/write packet command to the drive. This is usually + * called directly from cdrom_start_{read,write}(). However, for drq_interrupt + * devices, it is called from an interrupt when the drive is ready to accept + * the command. + */ +static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive) +{ + struct request *rq = drive->hwif->hwgroup->rq; + /* send the command to the drive and return */ return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr); } @@ -1224,8 +1230,12 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, } else { xferlen = 32768; fn = cdrom_start_rw_cont; + if (cdrom_start_rw(drive, rq) == ide_stopped) return ide_stopped; + + if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped) + return ide_stopped; } info->last_block = block; } else if (blk_sense_request(rq) || blk_pc_request(rq) || -- cgit v1.2.3 From 7fcebda501681080a242733b8db3f09f5ccb5d3f Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:46 +0200 Subject: ide-cd: move request prep chunk from cdrom_do_newpc_cont to rq issue path As a nice side effect, this minimizes the IRQ handler execution time. There should be no functionality change resulting from this patch. [bart: remove extra newlines from ide_cd_do_request()] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 9e593cebc00c..2b3c69d1f53f 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1143,9 +1143,6 @@ static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive) { struct request *rq = HWGROUP(drive)->rq; - if (!rq->timeout) - rq->timeout = ATAPI_WAIT_PC; - return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr); } @@ -1242,6 +1239,10 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, rq->cmd_type == REQ_TYPE_ATA_PC) { xferlen = rq->data_len; fn = cdrom_do_newpc_cont; + + if (!rq->timeout) + rq->timeout = ATAPI_WAIT_PC; + cdrom_do_block_pc(drive, rq); } else if (blk_special_request(rq)) { /* right now this can only be a reset... */ @@ -1256,8 +1257,6 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq, return cdrom_start_packet_command(drive, xferlen, fn); } - - /* * Ioctl handling. * -- cgit v1.2.3 From c96a7df8dba5800c03b0f1edd87b2f3d0473a119 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:46 +0200 Subject: ide-floppy: fold idefloppy_create_test_unit_ready_cmd into idefloppy_open There's no need for this function since it is used only once. [bart: ported it over IDE changes] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index b3689437269f..df19ede73884 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -561,12 +561,6 @@ static void idefloppy_create_start_stop_cmd(struct ide_atapi_pc *pc, int start) pc->c[4] = start; } -static void idefloppy_create_test_unit_ready_cmd(struct ide_atapi_pc *pc) -{ - idefloppy_init_pc(pc); - pc->c[0] = GPCMD_TEST_UNIT_READY; -} - static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, struct ide_atapi_pc *pc, struct request *rq, unsigned long sector) @@ -1166,7 +1160,9 @@ static int idefloppy_open(struct inode *inode, struct file *filp) floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; /* Just in case */ - idefloppy_create_test_unit_ready_cmd(&pc); + idefloppy_init_pc(&pc); + pc.c[0] = GPCMD_TEST_UNIT_READY; + if (idefloppy_queue_pc_tail(drive, &pc)) { idefloppy_create_start_stop_cmd(&pc, 1); (void) idefloppy_queue_pc_tail(drive, &pc); -- cgit v1.2.3 From 68dc3575e064a5655cbd656fbf32d6ceeb85ac9e Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 16 Jul 2008 20:33:47 +0200 Subject: ide-floppy: zero out the whole struct ide_atapi_pc on init This is a precaution just to make sure a new pc is clean when allocated. There should be no functional change introduced by this patch. [bart: ported it over IDE changes] Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index df19ede73884..00948c39822b 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -351,10 +351,7 @@ static void ide_floppy_callback(ide_drive_t *drive) static void idefloppy_init_pc(struct ide_atapi_pc *pc) { - memset(pc->c, 0, 12); - pc->retries = 0; - pc->flags = 0; - pc->req_xfer = 0; + memset(pc, 0, sizeof(*pc)); pc->buf = pc->pc_buf; pc->buf_size = IDEFLOPPY_PC_BUFFER_SIZE; pc->callback = ide_floppy_callback; -- cgit v1.2.3 From 85ae98a3dff2da860a4f8f9e4a0de69ad82ce633 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 16 Jul 2008 20:33:47 +0200 Subject: ide: endian annotations in ide-floppy.c Signed-off-by: Harvey Harrison Cc: Al Viro Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 00948c39822b..c7e4433fcbcf 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -702,10 +702,10 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) set_disk_ro(floppy->disk, floppy->wp); page = &pc.buf[8]; - transfer_rate = be16_to_cpu(*(u16 *)&pc.buf[8 + 2]); - sector_size = be16_to_cpu(*(u16 *)&pc.buf[8 + 6]); - cyls = be16_to_cpu(*(u16 *)&pc.buf[8 + 8]); - rpm = be16_to_cpu(*(u16 *)&pc.buf[8 + 28]); + transfer_rate = be16_to_cpup((__be16 *)&pc.buf[8 + 2]); + sector_size = be16_to_cpup((__be16 *)&pc.buf[8 + 6]); + cyls = be16_to_cpup((__be16 *)&pc.buf[8 + 8]); + rpm = be16_to_cpup((__be16 *)&pc.buf[8 + 28]); heads = pc.buf[8 + 4]; sectors = pc.buf[8 + 5]; @@ -780,8 +780,8 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) for (i = 0; i < desc_cnt; i++) { unsigned int desc_start = 4 + i*8; - blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]); - length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]); + blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); + length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", i, blocks * length / 1024, blocks, length); @@ -902,8 +902,8 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) if (u_index >= u_array_size) break; /* User-supplied buffer too small */ - blocks = be32_to_cpu(*(u32 *)&pc.buf[desc_start]); - length = be16_to_cpu(*(u16 *)&pc.buf[desc_start + 6]); + blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]); + length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]); if (put_user(blocks, argp)) return(-EFAULT); -- cgit v1.2.3 From ffa793f9bb5b563edb4cacc43a4d6677eec0e36b Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 16 Jul 2008 20:33:47 +0200 Subject: remove BLK_DEV_HD_ONLY After commit 80aa31cb460d12c1e02327b43eceb3eebc6e7090 (ide: remove CONFIG_BLK_DEV_HD_IDE config option (take 2)) the indirection through BLK_DEV_HD_ONLY is no longer required. Signed-off-by: Adrian Bunk Cc: rmk@arm.linux.org.uk Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 21511d47d926..39b95f9c2ad1 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1000,7 +1000,7 @@ config BLK_DEV_IDEDMA endif -config BLK_DEV_HD_ONLY +config BLK_DEV_HD bool "Old hard disk (MFM/RLL/IDE) driver" depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN help @@ -1023,7 +1023,4 @@ config BLK_DEV_HD_ONLY Disk-HOWTO, available from . -config BLK_DEV_HD - def_bool BLK_DEV_HD_ONLY - endif # IDE -- cgit v1.2.3 From 01c22bfc30a3f40fed08cfd2779348edcb6c5e53 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 16 Jul 2008 20:33:47 +0200 Subject: ide/legacy/hd.c: use late_initcall() Since the later move to drivers/block/ will break the link order, the module_init() has to become a late_initcall(). Signed-off-by: Adrian Bunk Cc: rmk@arm.linux.org.uk Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Makefile | 1 - drivers/ide/legacy/hd.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 8605536ea18f..39e99ace5cd3 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -62,7 +62,6 @@ endif obj-$(CONFIG_BLK_DEV_IDE) += arm/ mips/ -# old hd driver must be last ifeq ($(CONFIG_BLK_DEV_HD), y) hd-core-y += legacy/hd.o obj-y += hd-core.o diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c index abdedf56643e..00b695652b2a 100644 --- a/drivers/ide/legacy/hd.c +++ b/drivers/ide/legacy/hd.c @@ -812,4 +812,4 @@ static int __init parse_hd_setup(char *line) } __setup("hd=", parse_hd_setup); -module_init(hd_init); +late_initcall(hd_init); -- cgit v1.2.3 From 453ea3ed0b3e8ad67d4ee9d2fccf3d95a3e1f709 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 16 Jul 2008 20:33:47 +0200 Subject: move ide/legacy/hd.c to drivers/block/ This patch moves hd.c to drivers/block/ Signed-off-by: Adrian Bunk Cc: rmk@arm.linux.org.uk Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/block/Kconfig | 24 ++ drivers/block/Makefile | 1 + drivers/block/hd.c | 815 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/ide/Kconfig | 23 -- drivers/ide/Makefile | 5 - drivers/ide/legacy/hd.c | 815 ------------------------------------------------ 6 files changed, 840 insertions(+), 843 deletions(-) create mode 100644 drivers/block/hd.c delete mode 100644 drivers/ide/legacy/hd.c diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 0d1d2133d9bc..c3909743c484 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -433,4 +433,28 @@ config VIRTIO_BLK This is the virtual block driver for virtio. It can be used with lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. +config BLK_DEV_HD + bool "Old hard disk (MFM/RLL/IDE) driver" + depends on HAVE_IDE + depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN + help + There are two drivers for MFM/RLL/IDE hard disks. Most people use + the newer enhanced driver, but this old one is still around for two + reasons. Some older systems have strange timing problems and seem to + work only with the old driver (which itself does not work with some + newer systems). The other reason is that the old driver is smaller, + since it lacks the enhanced functionality of the new one. This makes + it a good choice for systems with very tight memory restrictions, or + for systems with only older MFM/RLL/ESDI drives. Choosing the old + driver can save 13 KB or so of kernel memory. + + If you want to use this driver together with the new one you have + to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new + driver from probing the primary interface. + + If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver + instead of this one. For more detailed information, read the + Disk-HOWTO, available from + . + endif # BLK_DEV diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 5e584306be99..204332b29578 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -29,5 +29,6 @@ obj-$(CONFIG_VIRTIO_BLK) += virtio_blk.o obj-$(CONFIG_VIODASD) += viodasd.o obj-$(CONFIG_BLK_DEV_SX8) += sx8.o obj-$(CONFIG_BLK_DEV_UB) += ub.o +obj-$(CONFIG_BLK_DEV_HD) += hd.o obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += xen-blkfront.o diff --git a/drivers/block/hd.c b/drivers/block/hd.c new file mode 100644 index 000000000000..00b695652b2a --- /dev/null +++ b/drivers/block/hd.c @@ -0,0 +1,815 @@ +/* + * Copyright (C) 1991, 1992 Linus Torvalds + * + * This is the low-level hd interrupt support. It traverses the + * request-list, using interrupts to jump between functions. As + * all the functions are called within interrupts, we may not + * sleep. Special care is recommended. + * + * modified by Drew Eckhardt to check nr of hd's from the CMOS. + * + * Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug + * in the early extended-partition checks and added DM partitions + * + * IRQ-unmask, drive-id, multiple-mode, support for ">16 heads", + * and general streamlining by Mark Lord. + * + * Removed 99% of above. Use Mark's ide driver for those options. + * This is now a lightweight ST-506 driver. (Paul Gortmaker) + * + * Modified 1995 Russell King for ARM processor. + * + * Bugfix: max_sectors must be <= 255 or the wheels tend to come + * off in a hurry once you queue things up - Paul G. 02/2001 + */ + +/* Uncomment the following if you want verbose error reports. */ +/* #define VERBOSE_ERRORS */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* CMOS defines */ +#include +#include +#include + +#define REALLY_SLOW_IO +#include +#include +#include + +#ifdef __arm__ +#undef HD_IRQ +#endif +#include +#ifdef __arm__ +#define HD_IRQ IRQ_HARDDISK +#endif + +/* Hd controller regster ports */ + +#define HD_DATA 0x1f0 /* _CTL when writing */ +#define HD_ERROR 0x1f1 /* see err-bits */ +#define HD_NSECTOR 0x1f2 /* nr of sectors to read/write */ +#define HD_SECTOR 0x1f3 /* starting sector */ +#define HD_LCYL 0x1f4 /* starting cylinder */ +#define HD_HCYL 0x1f5 /* high byte of starting cyl */ +#define HD_CURRENT 0x1f6 /* 101dhhhh , d=drive, hhhh=head */ +#define HD_STATUS 0x1f7 /* see status-bits */ +#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */ +#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */ +#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */ + +#define HD_CMD 0x3f6 /* used for resets */ +#define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */ + +/* Bits of HD_STATUS */ +#define ERR_STAT 0x01 +#define INDEX_STAT 0x02 +#define ECC_STAT 0x04 /* Corrected error */ +#define DRQ_STAT 0x08 +#define SEEK_STAT 0x10 +#define SERVICE_STAT SEEK_STAT +#define WRERR_STAT 0x20 +#define READY_STAT 0x40 +#define BUSY_STAT 0x80 + +/* Bits for HD_ERROR */ +#define MARK_ERR 0x01 /* Bad address mark */ +#define TRK0_ERR 0x02 /* couldn't find track 0 */ +#define ABRT_ERR 0x04 /* Command aborted */ +#define MCR_ERR 0x08 /* media change request */ +#define ID_ERR 0x10 /* ID field not found */ +#define MC_ERR 0x20 /* media changed */ +#define ECC_ERR 0x40 /* Uncorrectable ECC error */ +#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */ +#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */ + +static DEFINE_SPINLOCK(hd_lock); +static struct request_queue *hd_queue; + +#define MAJOR_NR HD_MAJOR +#define QUEUE (hd_queue) +#define CURRENT elv_next_request(hd_queue) + +#define TIMEOUT_VALUE (6*HZ) +#define HD_DELAY 0 + +#define MAX_ERRORS 16 /* Max read/write errors/sector */ +#define RESET_FREQ 8 /* Reset controller every 8th retry */ +#define RECAL_FREQ 4 /* Recalibrate every 4th retry */ +#define MAX_HD 2 + +#define STAT_OK (READY_STAT|SEEK_STAT) +#define OK_STATUS(s) (((s)&(STAT_OK|(BUSY_STAT|WRERR_STAT|ERR_STAT)))==STAT_OK) + +static void recal_intr(void); +static void bad_rw_intr(void); + +static int reset; +static int hd_error; + +/* + * This struct defines the HD's and their types. + */ +struct hd_i_struct { + unsigned int head, sect, cyl, wpcom, lzone, ctl; + int unit; + int recalibrate; + int special_op; +}; + +#ifdef HD_TYPE +static struct hd_i_struct hd_info[] = { HD_TYPE }; +static int NR_HD = ARRAY_SIZE(hd_info); +#else +static struct hd_i_struct hd_info[MAX_HD]; +static int NR_HD; +#endif + +static struct gendisk *hd_gendisk[MAX_HD]; + +static struct timer_list device_timer; + +#define TIMEOUT_VALUE (6*HZ) + +#define SET_TIMER \ + do { \ + mod_timer(&device_timer, jiffies + TIMEOUT_VALUE); \ + } while (0) + +static void (*do_hd)(void) = NULL; +#define SET_HANDLER(x) \ +if ((do_hd = (x)) != NULL) \ + SET_TIMER; \ +else \ + del_timer(&device_timer); + + +#if (HD_DELAY > 0) + +#include + +unsigned long last_req; + +unsigned long read_timer(void) +{ + unsigned long t, flags; + int i; + + spin_lock_irqsave(&i8253_lock, flags); + t = jiffies * 11932; + outb_p(0, 0x43); + i = inb_p(0x40); + i |= inb(0x40) << 8; + spin_unlock_irqrestore(&i8253_lock, flags); + return(t - i); +} +#endif + +static void __init hd_setup(char *str, int *ints) +{ + int hdind = 0; + + if (ints[0] != 3) + return; + if (hd_info[0].head != 0) + hdind = 1; + hd_info[hdind].head = ints[2]; + hd_info[hdind].sect = ints[3]; + hd_info[hdind].cyl = ints[1]; + hd_info[hdind].wpcom = 0; + hd_info[hdind].lzone = ints[1]; + hd_info[hdind].ctl = (ints[2] > 8 ? 8 : 0); + NR_HD = hdind+1; +} + +static void dump_status(const char *msg, unsigned int stat) +{ + char *name = "hd?"; + if (CURRENT) + name = CURRENT->rq_disk->disk_name; + +#ifdef VERBOSE_ERRORS + printk("%s: %s: status=0x%02x { ", name, msg, stat & 0xff); + if (stat & BUSY_STAT) printk("Busy "); + if (stat & READY_STAT) printk("DriveReady "); + if (stat & WRERR_STAT) printk("WriteFault "); + if (stat & SEEK_STAT) printk("SeekComplete "); + if (stat & DRQ_STAT) printk("DataRequest "); + if (stat & ECC_STAT) printk("CorrectedError "); + if (stat & INDEX_STAT) printk("Index "); + if (stat & ERR_STAT) printk("Error "); + printk("}\n"); + if ((stat & ERR_STAT) == 0) { + hd_error = 0; + } else { + hd_error = inb(HD_ERROR); + printk("%s: %s: error=0x%02x { ", name, msg, hd_error & 0xff); + if (hd_error & BBD_ERR) printk("BadSector "); + if (hd_error & ECC_ERR) printk("UncorrectableError "); + if (hd_error & ID_ERR) printk("SectorIdNotFound "); + if (hd_error & ABRT_ERR) printk("DriveStatusError "); + if (hd_error & TRK0_ERR) printk("TrackZeroNotFound "); + if (hd_error & MARK_ERR) printk("AddrMarkNotFound "); + printk("}"); + if (hd_error & (BBD_ERR|ECC_ERR|ID_ERR|MARK_ERR)) { + printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL), + inb(HD_CURRENT) & 0xf, inb(HD_SECTOR)); + if (CURRENT) + printk(", sector=%ld", CURRENT->sector); + } + printk("\n"); + } +#else + printk("%s: %s: status=0x%02x.\n", name, msg, stat & 0xff); + if ((stat & ERR_STAT) == 0) { + hd_error = 0; + } else { + hd_error = inb(HD_ERROR); + printk("%s: %s: error=0x%02x.\n", name, msg, hd_error & 0xff); + } +#endif +} + +static void check_status(void) +{ + int i = inb_p(HD_STATUS); + + if (!OK_STATUS(i)) { + dump_status("check_status", i); + bad_rw_intr(); + } +} + +static int controller_busy(void) +{ + int retries = 100000; + unsigned char status; + + do { + status = inb_p(HD_STATUS); + } while ((status & BUSY_STAT) && --retries); + return status; +} + +static int status_ok(void) +{ + unsigned char status = inb_p(HD_STATUS); + + if (status & BUSY_STAT) + return 1; /* Ancient, but does it make sense??? */ + if (status & WRERR_STAT) + return 0; + if (!(status & READY_STAT)) + return 0; + if (!(status & SEEK_STAT)) + return 0; + return 1; +} + +static int controller_ready(unsigned int drive, unsigned int head) +{ + int retry = 100; + + do { + if (controller_busy() & BUSY_STAT) + return 0; + outb_p(0xA0 | (drive<<4) | head, HD_CURRENT); + if (status_ok()) + return 1; + } while (--retry); + return 0; +} + +static void hd_out(struct hd_i_struct *disk, + unsigned int nsect, + unsigned int sect, + unsigned int head, + unsigned int cyl, + unsigned int cmd, + void (*intr_addr)(void)) +{ + unsigned short port; + +#if (HD_DELAY > 0) + while (read_timer() - last_req < HD_DELAY) + /* nothing */; +#endif + if (reset) + return; + if (!controller_ready(disk->unit, head)) { + reset = 1; + return; + } + SET_HANDLER(intr_addr); + outb_p(disk->ctl, HD_CMD); + port = HD_DATA; + outb_p(disk->wpcom >> 2, ++port); + outb_p(nsect, ++port); + outb_p(sect, ++port); + outb_p(cyl, ++port); + outb_p(cyl >> 8, ++port); + outb_p(0xA0 | (disk->unit << 4) | head, ++port); + outb_p(cmd, ++port); +} + +static void hd_request (void); + +static int drive_busy(void) +{ + unsigned int i; + unsigned char c; + + for (i = 0; i < 500000 ; i++) { + c = inb_p(HD_STATUS); + if ((c & (BUSY_STAT | READY_STAT | SEEK_STAT)) == STAT_OK) + return 0; + } + dump_status("reset timed out", c); + return 1; +} + +static void reset_controller(void) +{ + int i; + + outb_p(4, HD_CMD); + for (i = 0; i < 1000; i++) barrier(); + outb_p(hd_info[0].ctl & 0x0f, HD_CMD); + for (i = 0; i < 1000; i++) barrier(); + if (drive_busy()) + printk("hd: controller still busy\n"); + else if ((hd_error = inb(HD_ERROR)) != 1) + printk("hd: controller reset failed: %02x\n", hd_error); +} + +static void reset_hd(void) +{ + static int i; + +repeat: + if (reset) { + reset = 0; + i = -1; + reset_controller(); + } else { + check_status(); + if (reset) + goto repeat; + } + if (++i < NR_HD) { + struct hd_i_struct *disk = &hd_info[i]; + disk->special_op = disk->recalibrate = 1; + hd_out(disk, disk->sect, disk->sect, disk->head-1, + disk->cyl, WIN_SPECIFY, &reset_hd); + if (reset) + goto repeat; + } else + hd_request(); +} + +/* + * Ok, don't know what to do with the unexpected interrupts: on some machines + * doing a reset and a retry seems to result in an eternal loop. Right now I + * ignore it, and just set the timeout. + * + * On laptops (and "green" PCs), an unexpected interrupt occurs whenever the + * drive enters "idle", "standby", or "sleep" mode, so if the status looks + * "good", we just ignore the interrupt completely. + */ +static void unexpected_hd_interrupt(void) +{ + unsigned int stat = inb_p(HD_STATUS); + + if (stat & (BUSY_STAT|DRQ_STAT|ECC_STAT|ERR_STAT)) { + dump_status("unexpected interrupt", stat); + SET_TIMER; + } +} + +/* + * bad_rw_intr() now tries to be a bit smarter and does things + * according to the error returned by the controller. + * -Mika Liljeberg (liljeber@cs.Helsinki.FI) + */ +static void bad_rw_intr(void) +{ + struct request *req = CURRENT; + if (req != NULL) { + struct hd_i_struct *disk = req->rq_disk->private_data; + if (++req->errors >= MAX_ERRORS || (hd_error & BBD_ERR)) { + end_request(req, 0); + disk->special_op = disk->recalibrate = 1; + } else if (req->errors % RESET_FREQ == 0) + reset = 1; + else if ((hd_error & TRK0_ERR) || req->errors % RECAL_FREQ == 0) + disk->special_op = disk->recalibrate = 1; + /* Otherwise just retry */ + } +} + +static inline int wait_DRQ(void) +{ + int retries; + int stat; + + for (retries = 0; retries < 100000; retries++) { + stat = inb_p(HD_STATUS); + if (stat & DRQ_STAT) + return 0; + } + dump_status("wait_DRQ", stat); + return -1; +} + +static void read_intr(void) +{ + struct request *req; + int i, retries = 100000; + + do { + i = (unsigned) inb_p(HD_STATUS); + if (i & BUSY_STAT) + continue; + if (!OK_STATUS(i)) + break; + if (i & DRQ_STAT) + goto ok_to_read; + } while (--retries > 0); + dump_status("read_intr", i); + bad_rw_intr(); + hd_request(); + return; +ok_to_read: + req = CURRENT; + insw(HD_DATA, req->buffer, 256); + req->sector++; + req->buffer += 512; + req->errors = 0; + i = --req->nr_sectors; + --req->current_nr_sectors; +#ifdef DEBUG + printk("%s: read: sector %ld, remaining = %ld, buffer=%p\n", + req->rq_disk->disk_name, req->sector, req->nr_sectors, + req->buffer+512); +#endif + if (req->current_nr_sectors <= 0) + end_request(req, 1); + if (i > 0) { + SET_HANDLER(&read_intr); + return; + } + (void) inb_p(HD_STATUS); +#if (HD_DELAY > 0) + last_req = read_timer(); +#endif + if (elv_next_request(QUEUE)) + hd_request(); + return; +} + +static void write_intr(void) +{ + struct request *req = CURRENT; + int i; + int retries = 100000; + + do { + i = (unsigned) inb_p(HD_STATUS); + if (i & BUSY_STAT) + continue; + if (!OK_STATUS(i)) + break; + if ((req->nr_sectors <= 1) || (i & DRQ_STAT)) + goto ok_to_write; + } while (--retries > 0); + dump_status("write_intr", i); + bad_rw_intr(); + hd_request(); + return; +ok_to_write: + req->sector++; + i = --req->nr_sectors; + --req->current_nr_sectors; + req->buffer += 512; + if (!i || (req->bio && req->current_nr_sectors <= 0)) + end_request(req, 1); + if (i > 0) { + SET_HANDLER(&write_intr); + outsw(HD_DATA, req->buffer, 256); + local_irq_enable(); + } else { +#if (HD_DELAY > 0) + last_req = read_timer(); +#endif + hd_request(); + } + return; +} + +static void recal_intr(void) +{ + check_status(); +#if (HD_DELAY > 0) + last_req = read_timer(); +#endif + hd_request(); +} + +/* + * This is another of the error-routines I don't know what to do with. The + * best idea seems to just set reset, and start all over again. + */ +static void hd_times_out(unsigned long dummy) +{ + char *name; + + do_hd = NULL; + + if (!CURRENT) + return; + + disable_irq(HD_IRQ); + local_irq_enable(); + reset = 1; + name = CURRENT->rq_disk->disk_name; + printk("%s: timeout\n", name); + if (++CURRENT->errors >= MAX_ERRORS) { +#ifdef DEBUG + printk("%s: too many errors\n", name); +#endif + end_request(CURRENT, 0); + } + local_irq_disable(); + hd_request(); + enable_irq(HD_IRQ); +} + +static int do_special_op(struct hd_i_struct *disk, struct request *req) +{ + if (disk->recalibrate) { + disk->recalibrate = 0; + hd_out(disk, disk->sect, 0, 0, 0, WIN_RESTORE, &recal_intr); + return reset; + } + if (disk->head > 16) { + printk("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name); + end_request(req, 0); + } + disk->special_op = 0; + return 1; +} + +/* + * The driver enables interrupts as much as possible. In order to do this, + * (a) the device-interrupt is disabled before entering hd_request(), + * and (b) the timeout-interrupt is disabled before the sti(). + * + * Interrupts are still masked (by default) whenever we are exchanging + * data/cmds with a drive, because some drives seem to have very poor + * tolerance for latency during I/O. The IDE driver has support to unmask + * interrupts for non-broken hardware, so use that driver if required. + */ +static void hd_request(void) +{ + unsigned int block, nsect, sec, track, head, cyl; + struct hd_i_struct *disk; + struct request *req; + + if (do_hd) + return; +repeat: + del_timer(&device_timer); + local_irq_enable(); + + req = CURRENT; + if (!req) { + do_hd = NULL; + return; + } + + if (reset) { + local_irq_disable(); + reset_hd(); + return; + } + disk = req->rq_disk->private_data; + block = req->sector; + nsect = req->nr_sectors; + if (block >= get_capacity(req->rq_disk) || + ((block+nsect) > get_capacity(req->rq_disk))) { + printk("%s: bad access: block=%d, count=%d\n", + req->rq_disk->disk_name, block, nsect); + end_request(req, 0); + goto repeat; + } + + if (disk->special_op) { + if (do_special_op(disk, req)) + goto repeat; + return; + } + sec = block % disk->sect + 1; + track = block / disk->sect; + head = track % disk->head; + cyl = track / disk->head; +#ifdef DEBUG + printk("%s: %sing: CHS=%d/%d/%d, sectors=%d, buffer=%p\n", + req->rq_disk->disk_name, + req_data_dir(req) == READ ? "read" : "writ", + cyl, head, sec, nsect, req->buffer); +#endif + if (blk_fs_request(req)) { + switch (rq_data_dir(req)) { + case READ: + hd_out(disk, nsect, sec, head, cyl, WIN_READ, + &read_intr); + if (reset) + goto repeat; + break; + case WRITE: + hd_out(disk, nsect, sec, head, cyl, WIN_WRITE, + &write_intr); + if (reset) + goto repeat; + if (wait_DRQ()) { + bad_rw_intr(); + goto repeat; + } + outsw(HD_DATA, req->buffer, 256); + break; + default: + printk("unknown hd-command\n"); + end_request(req, 0); + break; + } + } +} + +static void do_hd_request(struct request_queue *q) +{ + disable_irq(HD_IRQ); + hd_request(); + enable_irq(HD_IRQ); +} + +static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo) +{ + struct hd_i_struct *disk = bdev->bd_disk->private_data; + + geo->heads = disk->head; + geo->sectors = disk->sect; + geo->cylinders = disk->cyl; + return 0; +} + +/* + * Releasing a block device means we sync() it, so that it can safely + * be forgotten about... + */ + +static irqreturn_t hd_interrupt(int irq, void *dev_id) +{ + void (*handler)(void) = do_hd; + + do_hd = NULL; + del_timer(&device_timer); + if (!handler) + handler = unexpected_hd_interrupt; + handler(); + local_irq_enable(); + return IRQ_HANDLED; +} + +static struct block_device_operations hd_fops = { + .getgeo = hd_getgeo, +}; + +/* + * This is the hard disk IRQ description. The IRQF_DISABLED in sa_flags + * means we run the IRQ-handler with interrupts disabled: this is bad for + * interrupt latency, but anything else has led to problems on some + * machines. + * + * We enable interrupts in some of the routines after making sure it's + * safe. + */ + +static int __init hd_init(void) +{ + int drive; + + if (register_blkdev(MAJOR_NR, "hd")) + return -1; + + hd_queue = blk_init_queue(do_hd_request, &hd_lock); + if (!hd_queue) { + unregister_blkdev(MAJOR_NR, "hd"); + return -ENOMEM; + } + + blk_queue_max_sectors(hd_queue, 255); + init_timer(&device_timer); + device_timer.function = hd_times_out; + blk_queue_hardsect_size(hd_queue, 512); + + if (!NR_HD) { + /* + * We don't know anything about the drive. This means + * that you *MUST* specify the drive parameters to the + * kernel yourself. + * + * If we were on an i386, we used to read this info from + * the BIOS or CMOS. This doesn't work all that well, + * since this assumes that this is a primary or secondary + * drive, and if we're using this legacy driver, it's + * probably an auxilliary controller added to recover + * legacy data off an ST-506 drive. Either way, it's + * definitely safest to have the user explicitly specify + * the information. + */ + printk("hd: no drives specified - use hd=cyl,head,sectors" + " on kernel command line\n"); + goto out; + } + + for (drive = 0 ; drive < NR_HD ; drive++) { + struct gendisk *disk = alloc_disk(64); + struct hd_i_struct *p = &hd_info[drive]; + if (!disk) + goto Enomem; + disk->major = MAJOR_NR; + disk->first_minor = drive << 6; + disk->fops = &hd_fops; + sprintf(disk->disk_name, "hd%c", 'a'+drive); + disk->private_data = p; + set_capacity(disk, p->head * p->sect * p->cyl); + disk->queue = hd_queue; + p->unit = drive; + hd_gendisk[drive] = disk; + printk("%s: %luMB, CHS=%d/%d/%d\n", + disk->disk_name, (unsigned long)get_capacity(disk)/2048, + p->cyl, p->head, p->sect); + } + + if (request_irq(HD_IRQ, hd_interrupt, IRQF_DISABLED, "hd", NULL)) { + printk("hd: unable to get IRQ%d for the hard disk driver\n", + HD_IRQ); + goto out1; + } + if (!request_region(HD_DATA, 8, "hd")) { + printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA); + goto out2; + } + if (!request_region(HD_CMD, 1, "hd(cmd)")) { + printk(KERN_WARNING "hd: port 0x%x busy\n", HD_CMD); + goto out3; + } + + /* Let them fly */ + for (drive = 0; drive < NR_HD; drive++) + add_disk(hd_gendisk[drive]); + + return 0; + +out3: + release_region(HD_DATA, 8); +out2: + free_irq(HD_IRQ, NULL); +out1: + for (drive = 0; drive < NR_HD; drive++) + put_disk(hd_gendisk[drive]); + NR_HD = 0; +out: + del_timer(&device_timer); + unregister_blkdev(MAJOR_NR, "hd"); + blk_cleanup_queue(hd_queue); + return -1; +Enomem: + while (drive--) + put_disk(hd_gendisk[drive]); + goto out; +} + +static int __init parse_hd_setup(char *line) +{ + int ints[6]; + + (void) get_options(line, ARRAY_SIZE(ints), ints); + hd_setup(NULL, ints); + + return 1; +} +__setup("hd=", parse_hd_setup); + +late_initcall(hd_init); diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 39b95f9c2ad1..15b09b89588a 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1000,27 +1000,4 @@ config BLK_DEV_IDEDMA endif -config BLK_DEV_HD - bool "Old hard disk (MFM/RLL/IDE) driver" - depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN - help - There are two drivers for MFM/RLL/IDE hard disks. Most people use - the newer enhanced driver, but this old one is still around for two - reasons. Some older systems have strange timing problems and seem to - work only with the old driver (which itself does not work with some - newer systems). The other reason is that the old driver is smaller, - since it lacks the enhanced functionality of the new one. This makes - it a good choice for systems with very tight memory restrictions, or - for systems with only older MFM/RLL/ESDI drives. Choosing the old - driver can save 13 KB or so of kernel memory. - - If you want to use this driver together with the new one you have - to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new - driver from probing the primary interface. - - If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver - instead of this one. For more detailed information, read the - Disk-HOWTO, available from - . - endif # IDE diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 39e99ace5cd3..5d414e301a5a 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -61,8 +61,3 @@ ifeq ($(CONFIG_BLK_DEV_PLATFORM), y) endif obj-$(CONFIG_BLK_DEV_IDE) += arm/ mips/ - -ifeq ($(CONFIG_BLK_DEV_HD), y) - hd-core-y += legacy/hd.o - obj-y += hd-core.o -endif diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c deleted file mode 100644 index 00b695652b2a..000000000000 --- a/drivers/ide/legacy/hd.c +++ /dev/null @@ -1,815 +0,0 @@ -/* - * Copyright (C) 1991, 1992 Linus Torvalds - * - * This is the low-level hd interrupt support. It traverses the - * request-list, using interrupts to jump between functions. As - * all the functions are called within interrupts, we may not - * sleep. Special care is recommended. - * - * modified by Drew Eckhardt to check nr of hd's from the CMOS. - * - * Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug - * in the early extended-partition checks and added DM partitions - * - * IRQ-unmask, drive-id, multiple-mode, support for ">16 heads", - * and general streamlining by Mark Lord. - * - * Removed 99% of above. Use Mark's ide driver for those options. - * This is now a lightweight ST-506 driver. (Paul Gortmaker) - * - * Modified 1995 Russell King for ARM processor. - * - * Bugfix: max_sectors must be <= 255 or the wheels tend to come - * off in a hurry once you queue things up - Paul G. 02/2001 - */ - -/* Uncomment the following if you want verbose error reports. */ -/* #define VERBOSE_ERRORS */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include /* CMOS defines */ -#include -#include -#include - -#define REALLY_SLOW_IO -#include -#include -#include - -#ifdef __arm__ -#undef HD_IRQ -#endif -#include -#ifdef __arm__ -#define HD_IRQ IRQ_HARDDISK -#endif - -/* Hd controller regster ports */ - -#define HD_DATA 0x1f0 /* _CTL when writing */ -#define HD_ERROR 0x1f1 /* see err-bits */ -#define HD_NSECTOR 0x1f2 /* nr of sectors to read/write */ -#define HD_SECTOR 0x1f3 /* starting sector */ -#define HD_LCYL 0x1f4 /* starting cylinder */ -#define HD_HCYL 0x1f5 /* high byte of starting cyl */ -#define HD_CURRENT 0x1f6 /* 101dhhhh , d=drive, hhhh=head */ -#define HD_STATUS 0x1f7 /* see status-bits */ -#define HD_FEATURE HD_ERROR /* same io address, read=error, write=feature */ -#define HD_PRECOMP HD_FEATURE /* obsolete use of this port - predates IDE */ -#define HD_COMMAND HD_STATUS /* same io address, read=status, write=cmd */ - -#define HD_CMD 0x3f6 /* used for resets */ -#define HD_ALTSTATUS 0x3f6 /* same as HD_STATUS but doesn't clear irq */ - -/* Bits of HD_STATUS */ -#define ERR_STAT 0x01 -#define INDEX_STAT 0x02 -#define ECC_STAT 0x04 /* Corrected error */ -#define DRQ_STAT 0x08 -#define SEEK_STAT 0x10 -#define SERVICE_STAT SEEK_STAT -#define WRERR_STAT 0x20 -#define READY_STAT 0x40 -#define BUSY_STAT 0x80 - -/* Bits for HD_ERROR */ -#define MARK_ERR 0x01 /* Bad address mark */ -#define TRK0_ERR 0x02 /* couldn't find track 0 */ -#define ABRT_ERR 0x04 /* Command aborted */ -#define MCR_ERR 0x08 /* media change request */ -#define ID_ERR 0x10 /* ID field not found */ -#define MC_ERR 0x20 /* media changed */ -#define ECC_ERR 0x40 /* Uncorrectable ECC error */ -#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */ -#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */ - -static DEFINE_SPINLOCK(hd_lock); -static struct request_queue *hd_queue; - -#define MAJOR_NR HD_MAJOR -#define QUEUE (hd_queue) -#define CURRENT elv_next_request(hd_queue) - -#define TIMEOUT_VALUE (6*HZ) -#define HD_DELAY 0 - -#define MAX_ERRORS 16 /* Max read/write errors/sector */ -#define RESET_FREQ 8 /* Reset controller every 8th retry */ -#define RECAL_FREQ 4 /* Recalibrate every 4th retry */ -#define MAX_HD 2 - -#define STAT_OK (READY_STAT|SEEK_STAT) -#define OK_STATUS(s) (((s)&(STAT_OK|(BUSY_STAT|WRERR_STAT|ERR_STAT)))==STAT_OK) - -static void recal_intr(void); -static void bad_rw_intr(void); - -static int reset; -static int hd_error; - -/* - * This struct defines the HD's and their types. - */ -struct hd_i_struct { - unsigned int head, sect, cyl, wpcom, lzone, ctl; - int unit; - int recalibrate; - int special_op; -}; - -#ifdef HD_TYPE -static struct hd_i_struct hd_info[] = { HD_TYPE }; -static int NR_HD = ARRAY_SIZE(hd_info); -#else -static struct hd_i_struct hd_info[MAX_HD]; -static int NR_HD; -#endif - -static struct gendisk *hd_gendisk[MAX_HD]; - -static struct timer_list device_timer; - -#define TIMEOUT_VALUE (6*HZ) - -#define SET_TIMER \ - do { \ - mod_timer(&device_timer, jiffies + TIMEOUT_VALUE); \ - } while (0) - -static void (*do_hd)(void) = NULL; -#define SET_HANDLER(x) \ -if ((do_hd = (x)) != NULL) \ - SET_TIMER; \ -else \ - del_timer(&device_timer); - - -#if (HD_DELAY > 0) - -#include - -unsigned long last_req; - -unsigned long read_timer(void) -{ - unsigned long t, flags; - int i; - - spin_lock_irqsave(&i8253_lock, flags); - t = jiffies * 11932; - outb_p(0, 0x43); - i = inb_p(0x40); - i |= inb(0x40) << 8; - spin_unlock_irqrestore(&i8253_lock, flags); - return(t - i); -} -#endif - -static void __init hd_setup(char *str, int *ints) -{ - int hdind = 0; - - if (ints[0] != 3) - return; - if (hd_info[0].head != 0) - hdind = 1; - hd_info[hdind].head = ints[2]; - hd_info[hdind].sect = ints[3]; - hd_info[hdind].cyl = ints[1]; - hd_info[hdind].wpcom = 0; - hd_info[hdind].lzone = ints[1]; - hd_info[hdind].ctl = (ints[2] > 8 ? 8 : 0); - NR_HD = hdind+1; -} - -static void dump_status(const char *msg, unsigned int stat) -{ - char *name = "hd?"; - if (CURRENT) - name = CURRENT->rq_disk->disk_name; - -#ifdef VERBOSE_ERRORS - printk("%s: %s: status=0x%02x { ", name, msg, stat & 0xff); - if (stat & BUSY_STAT) printk("Busy "); - if (stat & READY_STAT) printk("DriveReady "); - if (stat & WRERR_STAT) printk("WriteFault "); - if (stat & SEEK_STAT) printk("SeekComplete "); - if (stat & DRQ_STAT) printk("DataRequest "); - if (stat & ECC_STAT) printk("CorrectedError "); - if (stat & INDEX_STAT) printk("Index "); - if (stat & ERR_STAT) printk("Error "); - printk("}\n"); - if ((stat & ERR_STAT) == 0) { - hd_error = 0; - } else { - hd_error = inb(HD_ERROR); - printk("%s: %s: error=0x%02x { ", name, msg, hd_error & 0xff); - if (hd_error & BBD_ERR) printk("BadSector "); - if (hd_error & ECC_ERR) printk("UncorrectableError "); - if (hd_error & ID_ERR) printk("SectorIdNotFound "); - if (hd_error & ABRT_ERR) printk("DriveStatusError "); - if (hd_error & TRK0_ERR) printk("TrackZeroNotFound "); - if (hd_error & MARK_ERR) printk("AddrMarkNotFound "); - printk("}"); - if (hd_error & (BBD_ERR|ECC_ERR|ID_ERR|MARK_ERR)) { - printk(", CHS=%d/%d/%d", (inb(HD_HCYL)<<8) + inb(HD_LCYL), - inb(HD_CURRENT) & 0xf, inb(HD_SECTOR)); - if (CURRENT) - printk(", sector=%ld", CURRENT->sector); - } - printk("\n"); - } -#else - printk("%s: %s: status=0x%02x.\n", name, msg, stat & 0xff); - if ((stat & ERR_STAT) == 0) { - hd_error = 0; - } else { - hd_error = inb(HD_ERROR); - printk("%s: %s: error=0x%02x.\n", name, msg, hd_error & 0xff); - } -#endif -} - -static void check_status(void) -{ - int i = inb_p(HD_STATUS); - - if (!OK_STATUS(i)) { - dump_status("check_status", i); - bad_rw_intr(); - } -} - -static int controller_busy(void) -{ - int retries = 100000; - unsigned char status; - - do { - status = inb_p(HD_STATUS); - } while ((status & BUSY_STAT) && --retries); - return status; -} - -static int status_ok(void) -{ - unsigned char status = inb_p(HD_STATUS); - - if (status & BUSY_STAT) - return 1; /* Ancient, but does it make sense??? */ - if (status & WRERR_STAT) - return 0; - if (!(status & READY_STAT)) - return 0; - if (!(status & SEEK_STAT)) - return 0; - return 1; -} - -static int controller_ready(unsigned int drive, unsigned int head) -{ - int retry = 100; - - do { - if (controller_busy() & BUSY_STAT) - return 0; - outb_p(0xA0 | (drive<<4) | head, HD_CURRENT); - if (status_ok()) - return 1; - } while (--retry); - return 0; -} - -static void hd_out(struct hd_i_struct *disk, - unsigned int nsect, - unsigned int sect, - unsigned int head, - unsigned int cyl, - unsigned int cmd, - void (*intr_addr)(void)) -{ - unsigned short port; - -#if (HD_DELAY > 0) - while (read_timer() - last_req < HD_DELAY) - /* nothing */; -#endif - if (reset) - return; - if (!controller_ready(disk->unit, head)) { - reset = 1; - return; - } - SET_HANDLER(intr_addr); - outb_p(disk->ctl, HD_CMD); - port = HD_DATA; - outb_p(disk->wpcom >> 2, ++port); - outb_p(nsect, ++port); - outb_p(sect, ++port); - outb_p(cyl, ++port); - outb_p(cyl >> 8, ++port); - outb_p(0xA0 | (disk->unit << 4) | head, ++port); - outb_p(cmd, ++port); -} - -static void hd_request (void); - -static int drive_busy(void) -{ - unsigned int i; - unsigned char c; - - for (i = 0; i < 500000 ; i++) { - c = inb_p(HD_STATUS); - if ((c & (BUSY_STAT | READY_STAT | SEEK_STAT)) == STAT_OK) - return 0; - } - dump_status("reset timed out", c); - return 1; -} - -static void reset_controller(void) -{ - int i; - - outb_p(4, HD_CMD); - for (i = 0; i < 1000; i++) barrier(); - outb_p(hd_info[0].ctl & 0x0f, HD_CMD); - for (i = 0; i < 1000; i++) barrier(); - if (drive_busy()) - printk("hd: controller still busy\n"); - else if ((hd_error = inb(HD_ERROR)) != 1) - printk("hd: controller reset failed: %02x\n", hd_error); -} - -static void reset_hd(void) -{ - static int i; - -repeat: - if (reset) { - reset = 0; - i = -1; - reset_controller(); - } else { - check_status(); - if (reset) - goto repeat; - } - if (++i < NR_HD) { - struct hd_i_struct *disk = &hd_info[i]; - disk->special_op = disk->recalibrate = 1; - hd_out(disk, disk->sect, disk->sect, disk->head-1, - disk->cyl, WIN_SPECIFY, &reset_hd); - if (reset) - goto repeat; - } else - hd_request(); -} - -/* - * Ok, don't know what to do with the unexpected interrupts: on some machines - * doing a reset and a retry seems to result in an eternal loop. Right now I - * ignore it, and just set the timeout. - * - * On laptops (and "green" PCs), an unexpected interrupt occurs whenever the - * drive enters "idle", "standby", or "sleep" mode, so if the status looks - * "good", we just ignore the interrupt completely. - */ -static void unexpected_hd_interrupt(void) -{ - unsigned int stat = inb_p(HD_STATUS); - - if (stat & (BUSY_STAT|DRQ_STAT|ECC_STAT|ERR_STAT)) { - dump_status("unexpected interrupt", stat); - SET_TIMER; - } -} - -/* - * bad_rw_intr() now tries to be a bit smarter and does things - * according to the error returned by the controller. - * -Mika Liljeberg (liljeber@cs.Helsinki.FI) - */ -static void bad_rw_intr(void) -{ - struct request *req = CURRENT; - if (req != NULL) { - struct hd_i_struct *disk = req->rq_disk->private_data; - if (++req->errors >= MAX_ERRORS || (hd_error & BBD_ERR)) { - end_request(req, 0); - disk->special_op = disk->recalibrate = 1; - } else if (req->errors % RESET_FREQ == 0) - reset = 1; - else if ((hd_error & TRK0_ERR) || req->errors % RECAL_FREQ == 0) - disk->special_op = disk->recalibrate = 1; - /* Otherwise just retry */ - } -} - -static inline int wait_DRQ(void) -{ - int retries; - int stat; - - for (retries = 0; retries < 100000; retries++) { - stat = inb_p(HD_STATUS); - if (stat & DRQ_STAT) - return 0; - } - dump_status("wait_DRQ", stat); - return -1; -} - -static void read_intr(void) -{ - struct request *req; - int i, retries = 100000; - - do { - i = (unsigned) inb_p(HD_STATUS); - if (i & BUSY_STAT) - continue; - if (!OK_STATUS(i)) - break; - if (i & DRQ_STAT) - goto ok_to_read; - } while (--retries > 0); - dump_status("read_intr", i); - bad_rw_intr(); - hd_request(); - return; -ok_to_read: - req = CURRENT; - insw(HD_DATA, req->buffer, 256); - req->sector++; - req->buffer += 512; - req->errors = 0; - i = --req->nr_sectors; - --req->current_nr_sectors; -#ifdef DEBUG - printk("%s: read: sector %ld, remaining = %ld, buffer=%p\n", - req->rq_disk->disk_name, req->sector, req->nr_sectors, - req->buffer+512); -#endif - if (req->current_nr_sectors <= 0) - end_request(req, 1); - if (i > 0) { - SET_HANDLER(&read_intr); - return; - } - (void) inb_p(HD_STATUS); -#if (HD_DELAY > 0) - last_req = read_timer(); -#endif - if (elv_next_request(QUEUE)) - hd_request(); - return; -} - -static void write_intr(void) -{ - struct request *req = CURRENT; - int i; - int retries = 100000; - - do { - i = (unsigned) inb_p(HD_STATUS); - if (i & BUSY_STAT) - continue; - if (!OK_STATUS(i)) - break; - if ((req->nr_sectors <= 1) || (i & DRQ_STAT)) - goto ok_to_write; - } while (--retries > 0); - dump_status("write_intr", i); - bad_rw_intr(); - hd_request(); - return; -ok_to_write: - req->sector++; - i = --req->nr_sectors; - --req->current_nr_sectors; - req->buffer += 512; - if (!i || (req->bio && req->current_nr_sectors <= 0)) - end_request(req, 1); - if (i > 0) { - SET_HANDLER(&write_intr); - outsw(HD_DATA, req->buffer, 256); - local_irq_enable(); - } else { -#if (HD_DELAY > 0) - last_req = read_timer(); -#endif - hd_request(); - } - return; -} - -static void recal_intr(void) -{ - check_status(); -#if (HD_DELAY > 0) - last_req = read_timer(); -#endif - hd_request(); -} - -/* - * This is another of the error-routines I don't know what to do with. The - * best idea seems to just set reset, and start all over again. - */ -static void hd_times_out(unsigned long dummy) -{ - char *name; - - do_hd = NULL; - - if (!CURRENT) - return; - - disable_irq(HD_IRQ); - local_irq_enable(); - reset = 1; - name = CURRENT->rq_disk->disk_name; - printk("%s: timeout\n", name); - if (++CURRENT->errors >= MAX_ERRORS) { -#ifdef DEBUG - printk("%s: too many errors\n", name); -#endif - end_request(CURRENT, 0); - } - local_irq_disable(); - hd_request(); - enable_irq(HD_IRQ); -} - -static int do_special_op(struct hd_i_struct *disk, struct request *req) -{ - if (disk->recalibrate) { - disk->recalibrate = 0; - hd_out(disk, disk->sect, 0, 0, 0, WIN_RESTORE, &recal_intr); - return reset; - } - if (disk->head > 16) { - printk("%s: cannot handle device with more than 16 heads - giving up\n", req->rq_disk->disk_name); - end_request(req, 0); - } - disk->special_op = 0; - return 1; -} - -/* - * The driver enables interrupts as much as possible. In order to do this, - * (a) the device-interrupt is disabled before entering hd_request(), - * and (b) the timeout-interrupt is disabled before the sti(). - * - * Interrupts are still masked (by default) whenever we are exchanging - * data/cmds with a drive, because some drives seem to have very poor - * tolerance for latency during I/O. The IDE driver has support to unmask - * interrupts for non-broken hardware, so use that driver if required. - */ -static void hd_request(void) -{ - unsigned int block, nsect, sec, track, head, cyl; - struct hd_i_struct *disk; - struct request *req; - - if (do_hd) - return; -repeat: - del_timer(&device_timer); - local_irq_enable(); - - req = CURRENT; - if (!req) { - do_hd = NULL; - return; - } - - if (reset) { - local_irq_disable(); - reset_hd(); - return; - } - disk = req->rq_disk->private_data; - block = req->sector; - nsect = req->nr_sectors; - if (block >= get_capacity(req->rq_disk) || - ((block+nsect) > get_capacity(req->rq_disk))) { - printk("%s: bad access: block=%d, count=%d\n", - req->rq_disk->disk_name, block, nsect); - end_request(req, 0); - goto repeat; - } - - if (disk->special_op) { - if (do_special_op(disk, req)) - goto repeat; - return; - } - sec = block % disk->sect + 1; - track = block / disk->sect; - head = track % disk->head; - cyl = track / disk->head; -#ifdef DEBUG - printk("%s: %sing: CHS=%d/%d/%d, sectors=%d, buffer=%p\n", - req->rq_disk->disk_name, - req_data_dir(req) == READ ? "read" : "writ", - cyl, head, sec, nsect, req->buffer); -#endif - if (blk_fs_request(req)) { - switch (rq_data_dir(req)) { - case READ: - hd_out(disk, nsect, sec, head, cyl, WIN_READ, - &read_intr); - if (reset) - goto repeat; - break; - case WRITE: - hd_out(disk, nsect, sec, head, cyl, WIN_WRITE, - &write_intr); - if (reset) - goto repeat; - if (wait_DRQ()) { - bad_rw_intr(); - goto repeat; - } - outsw(HD_DATA, req->buffer, 256); - break; - default: - printk("unknown hd-command\n"); - end_request(req, 0); - break; - } - } -} - -static void do_hd_request(struct request_queue *q) -{ - disable_irq(HD_IRQ); - hd_request(); - enable_irq(HD_IRQ); -} - -static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo) -{ - struct hd_i_struct *disk = bdev->bd_disk->private_data; - - geo->heads = disk->head; - geo->sectors = disk->sect; - geo->cylinders = disk->cyl; - return 0; -} - -/* - * Releasing a block device means we sync() it, so that it can safely - * be forgotten about... - */ - -static irqreturn_t hd_interrupt(int irq, void *dev_id) -{ - void (*handler)(void) = do_hd; - - do_hd = NULL; - del_timer(&device_timer); - if (!handler) - handler = unexpected_hd_interrupt; - handler(); - local_irq_enable(); - return IRQ_HANDLED; -} - -static struct block_device_operations hd_fops = { - .getgeo = hd_getgeo, -}; - -/* - * This is the hard disk IRQ description. The IRQF_DISABLED in sa_flags - * means we run the IRQ-handler with interrupts disabled: this is bad for - * interrupt latency, but anything else has led to problems on some - * machines. - * - * We enable interrupts in some of the routines after making sure it's - * safe. - */ - -static int __init hd_init(void) -{ - int drive; - - if (register_blkdev(MAJOR_NR, "hd")) - return -1; - - hd_queue = blk_init_queue(do_hd_request, &hd_lock); - if (!hd_queue) { - unregister_blkdev(MAJOR_NR, "hd"); - return -ENOMEM; - } - - blk_queue_max_sectors(hd_queue, 255); - init_timer(&device_timer); - device_timer.function = hd_times_out; - blk_queue_hardsect_size(hd_queue, 512); - - if (!NR_HD) { - /* - * We don't know anything about the drive. This means - * that you *MUST* specify the drive parameters to the - * kernel yourself. - * - * If we were on an i386, we used to read this info from - * the BIOS or CMOS. This doesn't work all that well, - * since this assumes that this is a primary or secondary - * drive, and if we're using this legacy driver, it's - * probably an auxilliary controller added to recover - * legacy data off an ST-506 drive. Either way, it's - * definitely safest to have the user explicitly specify - * the information. - */ - printk("hd: no drives specified - use hd=cyl,head,sectors" - " on kernel command line\n"); - goto out; - } - - for (drive = 0 ; drive < NR_HD ; drive++) { - struct gendisk *disk = alloc_disk(64); - struct hd_i_struct *p = &hd_info[drive]; - if (!disk) - goto Enomem; - disk->major = MAJOR_NR; - disk->first_minor = drive << 6; - disk->fops = &hd_fops; - sprintf(disk->disk_name, "hd%c", 'a'+drive); - disk->private_data = p; - set_capacity(disk, p->head * p->sect * p->cyl); - disk->queue = hd_queue; - p->unit = drive; - hd_gendisk[drive] = disk; - printk("%s: %luMB, CHS=%d/%d/%d\n", - disk->disk_name, (unsigned long)get_capacity(disk)/2048, - p->cyl, p->head, p->sect); - } - - if (request_irq(HD_IRQ, hd_interrupt, IRQF_DISABLED, "hd", NULL)) { - printk("hd: unable to get IRQ%d for the hard disk driver\n", - HD_IRQ); - goto out1; - } - if (!request_region(HD_DATA, 8, "hd")) { - printk(KERN_WARNING "hd: port 0x%x busy\n", HD_DATA); - goto out2; - } - if (!request_region(HD_CMD, 1, "hd(cmd)")) { - printk(KERN_WARNING "hd: port 0x%x busy\n", HD_CMD); - goto out3; - } - - /* Let them fly */ - for (drive = 0; drive < NR_HD; drive++) - add_disk(hd_gendisk[drive]); - - return 0; - -out3: - release_region(HD_DATA, 8); -out2: - free_irq(HD_IRQ, NULL); -out1: - for (drive = 0; drive < NR_HD; drive++) - put_disk(hd_gendisk[drive]); - NR_HD = 0; -out: - del_timer(&device_timer); - unregister_blkdev(MAJOR_NR, "hd"); - blk_cleanup_queue(hd_queue); - return -1; -Enomem: - while (drive--) - put_disk(hd_gendisk[drive]); - goto out; -} - -static int __init parse_hd_setup(char *line) -{ - int ints[6]; - - (void) get_options(line, ARRAY_SIZE(ints), ints); - hd_setup(NULL, ints); - - return 1; -} -__setup("hd=", parse_hd_setup); - -late_initcall(hd_init); -- cgit v1.2.3 From f327c1c33f4882c70f29ff3a9ff7c55c1951d1f6 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 16 Jul 2008 20:33:47 +0200 Subject: update the BLK_DEV_HD help text Many people will see this option the first time now that it is in drivers/block/ Make it clear that virtually noone needs it. Signed-off-by: Adrian Bunk Cc: rmk@arm.linux.org.uk Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/block/Kconfig | 26 +++++++------------------- 1 file changed, 7 insertions(+), 19 deletions(-) diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index c3909743c484..61ad8d639ba3 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -434,27 +434,15 @@ config VIRTIO_BLK lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. config BLK_DEV_HD - bool "Old hard disk (MFM/RLL/IDE) driver" + bool "Very old hard disk (MFM/RLL/IDE) driver" depends on HAVE_IDE depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN help - There are two drivers for MFM/RLL/IDE hard disks. Most people use - the newer enhanced driver, but this old one is still around for two - reasons. Some older systems have strange timing problems and seem to - work only with the old driver (which itself does not work with some - newer systems). The other reason is that the old driver is smaller, - since it lacks the enhanced functionality of the new one. This makes - it a good choice for systems with very tight memory restrictions, or - for systems with only older MFM/RLL/ESDI drives. Choosing the old - driver can save 13 KB or so of kernel memory. - - If you want to use this driver together with the new one you have - to use "hda=noprobe hdb=noprobe" kernel parameters to prevent the new - driver from probing the primary interface. - - If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver - instead of this one. For more detailed information, read the - Disk-HOWTO, available from - . + This is a very old hard disk driver that lacks the enhanced + functionality of the newer ones. + + It is required for systems with ancient MFM/RLL/ESDI drives. + + If unsure, say N. endif # BLK_DEV -- cgit v1.2.3 From 72a3d651b2fe341a8ae2ca164c395aa3007350cd Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 16 Jul 2008 20:33:48 +0200 Subject: hd.c: remove the #include The code that needed this #include was removed one year ago. Signed-off-by: Adrian Bunk Cc: rmk@arm.linux.org.uk Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/block/hd.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/block/hd.c b/drivers/block/hd.c index 00b695652b2a..682243bf2e46 100644 --- a/drivers/block/hd.c +++ b/drivers/block/hd.c @@ -37,7 +37,6 @@ #include #include #include -#include /* CMOS defines */ #include #include #include -- cgit v1.2.3 From 79e36a9f54aaf4a52eb2d9520953aa3960e99294 Mon Sep 17 00:00:00 2001 From: Elias Oltmanns Date: Wed, 16 Jul 2008 20:33:48 +0200 Subject: IDE: Fix HDIO_DRIVE_RESET handling Currently, the code path executing an HDIO_DRIVE_RESET ioctl is broken in various ways. Most importantly, it is treated as an out of band request in an illegal way which may very likely lead to system lock ups. Use the drive's request queue to avoid this problem (and fix a locking issue for free along the way). Signed-off-by: Elias Oltmanns Cc: "Alan Cox" Cc: "Randy Dunlap" Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 23 ++++++++++++++++++++++- drivers/ide/ide-iops.c | 18 +++++++++++++----- drivers/ide/ide.c | 41 +++++++++++++++-------------------------- include/linux/ide.h | 6 ++++++ 4 files changed, 56 insertions(+), 32 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 28057747c1f8..2b33c129740b 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -766,6 +766,18 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, return ide_stopped; } +static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq) +{ + switch (rq->cmd[0]) { + case REQ_DRIVE_RESET: + return ide_do_reset(drive); + default: + blk_dump_rq_flags(rq, "ide_special_rq - bad request"); + ide_end_request(drive, 0, 0); + return ide_stopped; + } +} + static void ide_check_pm_state(ide_drive_t *drive, struct request *rq) { struct request_pm_state *pm = rq->data; @@ -869,7 +881,16 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) pm->pm_step == ide_pm_state_completed) ide_complete_pm_request(drive, rq); return startstop; - } + } else if (!rq->rq_disk && blk_special_request(rq)) + /* + * TODO: Once all ULDs have been modified to + * check for specific op codes rather than + * blindly accepting any special request, the + * check for ->rq_disk above may be replaced + * by a more suitable mechanism or even + * dropped entirely. + */ + return ide_special_rq(drive, rq); drv = *(ide_driver_t **)rq->rq_disk->private_data; return drv->do_request(drive, rq, block); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 80ad4f234f3f..96f63eb12092 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -905,6 +905,14 @@ void ide_execute_pkt_cmd(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd); +static inline void ide_complete_drive_reset(ide_drive_t *drive) +{ + struct request *rq = drive->hwif->hwgroup->rq; + + if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) + ide_end_request(drive, 1, 0); +} + /* needed below */ static ide_startstop_t do_reset1 (ide_drive_t *, int); @@ -940,7 +948,7 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) } /* done polling */ hwgroup->polling = 0; - hwgroup->resetting = 0; + ide_complete_drive_reset(drive); return ide_stopped; } @@ -961,7 +969,7 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) if (port_ops->reset_poll(drive)) { printk(KERN_ERR "%s: host reset_poll failure for %s.\n", hwif->name, drive->name); - return ide_stopped; + goto out; } } @@ -1004,7 +1012,8 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) } } hwgroup->polling = 0; /* done polling */ - hwgroup->resetting = 0; /* done reset attempt */ +out: + ide_complete_drive_reset(drive); return ide_stopped; } @@ -1090,7 +1099,6 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) /* For an ATAPI device, first try an ATAPI SRST. */ if (drive->media != ide_disk && !do_not_try_atapi) { - hwgroup->resetting = 1; pre_reset(drive); SELECT_DRIVE(drive); udelay (20); @@ -1112,10 +1120,10 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) if (io_ports->ctl_addr == 0) { spin_unlock_irqrestore(&ide_lock, flags); + ide_complete_drive_reset(drive); return ide_stopped; } - hwgroup->resetting = 1; /* * Note that we also set nIEN while resetting the device, * to mask unwanted interrupts from the interface during the reset. diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 90ae00d4aaf5..1ec983b00511 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -529,6 +529,19 @@ static int generic_ide_resume(struct device *dev) return err; } +static void generic_drive_reset(ide_drive_t *drive) +{ + struct request *rq; + + rq = blk_get_request(drive->queue, READ, __GFP_WAIT); + rq->cmd_type = REQ_TYPE_SPECIAL; + rq->cmd_len = 1; + rq->cmd[0] = REQ_DRIVE_RESET; + rq->cmd_flags |= REQ_SOFTBARRIER; + blk_execute_rq(drive->queue, NULL, rq, 1); + blk_put_request(rq); +} + int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev, unsigned int cmd, unsigned long arg) { @@ -603,33 +616,9 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device if (!capable(CAP_SYS_ADMIN)) return -EACCES; - /* - * Abort the current command on the - * group if there is one, taking - * care not to allow anything else - * to be queued and to die on the - * spot if we miss one somehow - */ - - spin_lock_irqsave(&ide_lock, flags); - - if (HWGROUP(drive)->resetting) { - spin_unlock_irqrestore(&ide_lock, flags); - return -EBUSY; - } - - ide_abort(drive, "drive reset"); - - BUG_ON(HWGROUP(drive)->handler); - - /* Ensure nothing gets queued after we - drop the lock. Reset will clear the busy */ - - HWGROUP(drive)->busy = 1; - spin_unlock_irqrestore(&ide_lock, flags); - (void) ide_do_reset(drive); - + generic_drive_reset(drive); return 0; + case HDIO_GET_BUSSTATE: if (!capable(CAP_SYS_ADMIN)) return -EACCES; diff --git a/include/linux/ide.h b/include/linux/ide.h index f9cbe9350cad..021710cc1b1c 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -138,6 +138,12 @@ struct ide_io_ports { #define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */ #define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */ +/* + * Op codes for special requests to be handled by ide_special_rq(). + * Values should be in the range of 0x20 to 0x3f. + */ +#define REQ_DRIVE_RESET 0x20 + /* * Check for an interrupt and acknowledge the interrupt status */ -- cgit v1.2.3 From 3ef5eb424ebf0cd981192a416358fd707a9f959b Mon Sep 17 00:00:00 2001 From: Elias Oltmanns Date: Wed, 16 Jul 2008 20:33:48 +0200 Subject: IDE: Remove unused code Remove some code which has been made obsolete and hasn't worked properly before anyway. Part of the infrastructure may be reintroduced in a follow up patch to implement a working command aborting facility. Signed-off-by: Elias Oltmanns Cc: "Alan Cox" Cc: "Randy Dunlap" Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 1 - drivers/ide/ide-disk.c | 1 - drivers/ide/ide-floppy.c | 1 - drivers/ide/ide-io.c | 49 ------------------------------------------------ drivers/ide/ide-tape.c | 1 - drivers/scsi/ide-scsi.c | 14 -------------- include/linux/ide.h | 7 ------- 7 files changed, 74 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 2b3c69d1f53f..6e29dd532090 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1952,7 +1952,6 @@ static ide_driver_t ide_cdrom_driver = { .do_request = ide_cd_do_request, .end_request = ide_end_request, .error = __ide_error, - .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idecd_proc, #endif diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 5f49a4ae9dd8..3a2e80237c10 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -985,7 +985,6 @@ static ide_driver_t idedisk_driver = { .do_request = ide_do_rw_disk, .end_request = ide_end_request, .error = __ide_error, - .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idedisk_proc, #endif diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index c7e4433fcbcf..011d72011cc4 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1129,7 +1129,6 @@ static ide_driver_t idefloppy_driver = { .do_request = idefloppy_do_request, .end_request = idefloppy_end_request, .error = __ide_error, - .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idefloppy_proc, #endif diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 2b33c129740b..661b75a89d4d 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -504,55 +504,6 @@ ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, u8 stat) EXPORT_SYMBOL_GPL(ide_error); -ide_startstop_t __ide_abort(ide_drive_t *drive, struct request *rq) -{ - if (drive->media != ide_disk) - rq->errors |= ERROR_RESET; - - ide_kill_rq(drive, rq); - - return ide_stopped; -} - -EXPORT_SYMBOL_GPL(__ide_abort); - -/** - * ide_abort - abort pending IDE operations - * @drive: drive the error occurred on - * @msg: message to report - * - * ide_abort kills and cleans up when we are about to do a - * host initiated reset on active commands. Longer term we - * want handlers to have sensible abort handling themselves - * - * This differs fundamentally from ide_error because in - * this case the command is doing just fine when we - * blow it away. - */ - -ide_startstop_t ide_abort(ide_drive_t *drive, const char *msg) -{ - struct request *rq; - - if (drive == NULL || (rq = HWGROUP(drive)->rq) == NULL) - return ide_stopped; - - /* retry only "normal" I/O: */ - if (!blk_fs_request(rq)) { - rq->errors = 1; - ide_end_drive_cmd(drive, BUSY_STAT, 0); - return ide_stopped; - } - - if (rq->rq_disk) { - ide_driver_t *drv; - - drv = *(ide_driver_t **)rq->rq_disk->private_data; - return drv->abort(drive, rq); - } else - return __ide_abort(drive, rq); -} - static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf) { tf->nsect = drive->sect; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index f9cf1670e4e1..b711ab96e287 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2591,7 +2591,6 @@ static ide_driver_t idetape_driver = { .do_request = idetape_do_request, .end_request = idetape_end_request, .error = __ide_error, - .abort = __ide_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idetape_proc, #endif diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 683bce375c74..f843c1383a4b 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -258,19 +258,6 @@ idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) return ide_stopped; } -static ide_startstop_t -idescsi_atapi_abort(ide_drive_t *drive, struct request *rq) -{ - debug_log("%s called for %lu\n", __func__, - ((struct ide_atapi_pc *) rq->special)->scsi_cmd->serial_number); - - rq->errors |= ERROR_MAX; - - idescsi_end_request(drive, 0, 0); - - return ide_stopped; -} - static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); @@ -524,7 +511,6 @@ static ide_driver_t idescsi_driver = { .do_request = idescsi_do_request, .end_request = idescsi_end_request, .error = idescsi_atapi_error, - .abort = idescsi_atapi_abort, #ifdef CONFIG_IDE_PROC_FS .proc = idescsi_proc, #endif diff --git a/include/linux/ide.h b/include/linux/ide.h index 021710cc1b1c..4726126f5a59 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -571,8 +571,6 @@ typedef struct hwgroup_s { unsigned int sleeping : 1; /* BOOL: polling active & poll_timeout field valid */ unsigned int polling : 1; - /* BOOL: in a polling reset situation. Must not trigger another reset yet */ - unsigned int resetting : 1; /* current drive */ ide_drive_t *drive; @@ -792,7 +790,6 @@ struct ide_driver_s { ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t); int (*end_request)(ide_drive_t *, int, int); ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8); - ide_startstop_t (*abort)(ide_drive_t *, struct request *rq); struct device_driver gen_driver; int (*probe)(ide_drive_t *); void (*remove)(ide_drive_t *); @@ -834,10 +831,6 @@ ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8); ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat); -ide_startstop_t __ide_abort(ide_drive_t *, struct request *); - -extern ide_startstop_t ide_abort(ide_drive_t *, const char *); - extern void ide_fix_driveid(struct hd_driveid *); extern void ide_fixstring(u8 *, const int, const int); -- cgit v1.2.3 From bb7ee9b1ec15358af870a81b0c6a03af29417f99 Mon Sep 17 00:00:00 2001 From: Elias Oltmanns Date: Wed, 16 Jul 2008 20:33:48 +0200 Subject: Update documentation of HDIO_DRIVE_RESET ioctl Alter the entry for HDIO_DRIVE_RESET in Documentation/ioctl/hdio.txt to reflect a functional change in the driver. Besides, the entry has been inaccurate before. Signed-off-by: Elias Oltmanns Cc: "Alan Cox" Cc: "Randy Dunlap" Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/ioctl/hdio.txt | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/Documentation/ioctl/hdio.txt b/Documentation/ioctl/hdio.txt index c19efdeace2c..44d283d6b136 100644 --- a/Documentation/ioctl/hdio.txt +++ b/Documentation/ioctl/hdio.txt @@ -511,9 +511,8 @@ HDIO_DRIVE_RESET execute a device reset notes: - Abort any current command, prevent anything else from being - queued, execute a reset on the device, and issue BLKRRPART - ioctl on the block device. + Execute a reset on the device as soon as the current IO + operation has completed. Executes an ATAPI soft reset if applicable, otherwise executes an ATA soft reset on the controller. -- cgit v1.2.3 From 64a8f00ff19508b3962c8a932375dbae88bee4d6 Mon Sep 17 00:00:00 2001 From: Elias Oltmanns Date: Wed, 16 Jul 2008 20:33:48 +0200 Subject: IDE: Report errors during drive reset back to user space Make sure that each error condition during the execution of an HDIO_DRIVE_RESET ioctl is actually reported to the calling process. Also, unify the exit path of reset_pollfunc() when returning ide_stopped since the need of ->port_ops->reset_poll() to be treated specially has vanished (way back, it seems). Signed-off-by: Elias Oltmanns Cc: "Alan Cox" Cc: "Randy Dunlap" Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/ioctl/hdio.txt | 2 ++ drivers/ide/ide-iops.c | 18 +++++++++++------- drivers/ide/ide.c | 10 ++++++---- drivers/ide/pci/siimage.c | 3 +-- 4 files changed, 20 insertions(+), 13 deletions(-) diff --git a/Documentation/ioctl/hdio.txt b/Documentation/ioctl/hdio.txt index 44d283d6b136..91a6ecbae0bb 100644 --- a/Documentation/ioctl/hdio.txt +++ b/Documentation/ioctl/hdio.txt @@ -508,6 +508,8 @@ HDIO_DRIVE_RESET execute a device reset error returns: EACCES Access denied: requires CAP_SYS_ADMIN + ENXIO No such device: phy dead or ctl_addr == 0 + EIO I/O error: reset timed out or hardware error notes: diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 96f63eb12092..44aaec256a30 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -905,12 +905,12 @@ void ide_execute_pkt_cmd(ide_drive_t *drive) } EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd); -static inline void ide_complete_drive_reset(ide_drive_t *drive) +static inline void ide_complete_drive_reset(ide_drive_t *drive, int err) { struct request *rq = drive->hwif->hwgroup->rq; if (rq && blk_special_request(rq) && rq->cmd[0] == REQ_DRIVE_RESET) - ide_end_request(drive, 1, 0); + ide_end_request(drive, err ? err : 1, 0); } /* needed below */ @@ -948,7 +948,7 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) } /* done polling */ hwgroup->polling = 0; - ide_complete_drive_reset(drive); + ide_complete_drive_reset(drive, 0); return ide_stopped; } @@ -964,9 +964,11 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) ide_hwif_t *hwif = HWIF(drive); const struct ide_port_ops *port_ops = hwif->port_ops; u8 tmp; + int err = 0; if (port_ops && port_ops->reset_poll) { - if (port_ops->reset_poll(drive)) { + err = port_ops->reset_poll(drive); + if (err) { printk(KERN_ERR "%s: host reset_poll failure for %s.\n", hwif->name, drive->name); goto out; @@ -983,6 +985,7 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) } printk("%s: reset timed-out, status=0x%02x\n", hwif->name, tmp); drive->failures++; + err = -EIO; } else { printk("%s: reset: ", hwif->name); tmp = ide_read_error(drive); @@ -1009,11 +1012,12 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) if (tmp & 0x80) printk("; slave: failed"); printk("\n"); + err = -EIO; } } - hwgroup->polling = 0; /* done polling */ out: - ide_complete_drive_reset(drive); + hwgroup->polling = 0; /* done polling */ + ide_complete_drive_reset(drive, err); return ide_stopped; } @@ -1120,7 +1124,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) if (io_ports->ctl_addr == 0) { spin_unlock_irqrestore(&ide_lock, flags); - ide_complete_drive_reset(drive); + ide_complete_drive_reset(drive, -ENXIO); return ide_stopped; } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 1ec983b00511..d4a6b102a772 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -529,17 +529,20 @@ static int generic_ide_resume(struct device *dev) return err; } -static void generic_drive_reset(ide_drive_t *drive) +static int generic_drive_reset(ide_drive_t *drive) { struct request *rq; + int ret = 0; rq = blk_get_request(drive->queue, READ, __GFP_WAIT); rq->cmd_type = REQ_TYPE_SPECIAL; rq->cmd_len = 1; rq->cmd[0] = REQ_DRIVE_RESET; rq->cmd_flags |= REQ_SOFTBARRIER; - blk_execute_rq(drive->queue, NULL, rq, 1); + if (blk_execute_rq(drive->queue, NULL, rq, 1)) + ret = rq->errors; blk_put_request(rq); + return ret; } int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev, @@ -616,8 +619,7 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device if (!capable(CAP_SYS_ADMIN)) return -EACCES; - generic_drive_reset(drive); - return 0; + return generic_drive_reset(drive); case HDIO_GET_BUSSTATE: if (!capable(CAP_SYS_ADMIN)) diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index b75e9bb390a7..6e9d7655d89c 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -421,8 +421,7 @@ static int sil_sata_reset_poll(ide_drive_t *drive) if ((sata_stat & 0x03) != 0x03) { printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n", hwif->name, sata_stat); - HWGROUP(drive)->polling = 0; - return ide_started; + return -ENXIO; } } -- cgit v1.2.3 From bef5b54bd7bf8117c75cb943d64549134c6d9a1f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 16 Jul 2008 13:02:24 +0100 Subject: Fix MIPS cross-compile problem Crosscompiling on a Fedora 9 machine running gcc 4.3.0 as its host compiler and gcc 3.4.6 for the mips-linux target results in the following build error: $ make malta_defconfig $ make cc1: error: unrecognized command line option "-fno-stack-protector" scripts/kconfig/conf -s arch/mips/Kconfig cc1: error: unrecognized command line option "-fno-stack-protector" The arch Makefile is included too late so the host compiler is feature tested, not the crosscompiler as intended and thus the Makefile applies adds -fno-stack-protector to crosscompiler's flags which fails for gcc 3.4.6. The bug was introduced by e06b8b98da071f7dd78fb7822991694288047df0 in 2.6.25; 35bb5b1e0e84cfa1a8906f7e6a77f391ff315791 did add more flags testing before the arch Makefile inclusion. Signed-off-by: Ralf Baechle Signed-off-by: Linus Torvalds --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 8a2a275be304..1564577bdc53 100644 --- a/Makefile +++ b/Makefile @@ -508,6 +508,8 @@ else KBUILD_CFLAGS += -O2 endif +include $(srctree)/arch/$(SRCARCH)/Makefile + ifneq (CONFIG_FRAME_WARN,0) KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN}) endif @@ -516,8 +518,6 @@ endif # Arch Makefiles may override this setting KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector) -include $(srctree)/arch/$(SRCARCH)/Makefile - ifdef CONFIG_FRAME_POINTER KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls else -- cgit v1.2.3 From e3621ee633810be1079d0fa65ac2c904f53b73fa Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 16 Jul 2008 08:39:12 -0500 Subject: powerpc/ep8248e: Fix compile problem if !CONFIG_FS_ENET If we don't enable FS_ENET we get build issues: arch/powerpc/platforms/built-in.o: In function `ep8248e_mdio_probe': arch/powerpc/platforms/82xx/ep8248e.c:129: undefined reference to `alloc_mdio_bitbang' arch/powerpc/platforms/82xx/ep8248e.c:143: undefined reference to `mdiobus_register' Signed-off-by: Kumar Gala Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/82xx/ep8248e.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c index d5770fdf7f09..373e993a5ed5 100644 --- a/arch/powerpc/platforms/82xx/ep8248e.c +++ b/arch/powerpc/platforms/82xx/ep8248e.c @@ -59,6 +59,7 @@ static void __init ep8248e_pic_init(void) of_node_put(np); } +#ifdef CONFIG_FS_ENET_MDIO_FCC static void ep8248e_set_mdc(struct mdiobb_ctrl *ctrl, int level) { if (level) @@ -164,6 +165,7 @@ static struct of_platform_driver ep8248e_mdio_driver = { .probe = ep8248e_mdio_probe, .remove = ep8248e_mdio_remove, }; +#endif struct cpm_pin { int port, pin, flags; @@ -296,7 +298,9 @@ static __initdata struct of_device_id of_bus_ids[] = { static int __init declare_of_platform_devices(void) { of_platform_bus_probe(NULL, of_bus_ids, NULL); +#ifdef CONFIG_FS_ENET_MDIO_FCC of_register_platform_driver(&ep8248e_mdio_driver); +#endif return 0; } -- cgit v1.2.3 From 3c3622dcb64c76c9abd2e468f802db9ba523421c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 16 Jul 2008 08:52:00 -0500 Subject: Fix compile issues in fs/compat_ioctl.c when CONFIG_BLOCK is disabled Fix fs/compat_ioctl.c to handle CONFIG_BLOCK=n, CONFIG_SCSI=n to avoid build errors: In file included from include/scsi/scsi.h:12, from fs/compat_ioctl.c:71: include/scsi/scsi_cmnd.h:27:25: warning: "BLK_MAX_CDB" is not defined include/scsi/scsi_cmnd.h:28:3: error: #error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB In file included from include/scsi/scsi.h:12, from fs/compat_ioctl.c:71: include/scsi/scsi_cmnd.h: In function 'scsi_bidi_cmnd': include/scsi/scsi_cmnd.h:182: error: implicit declaration of function 'blk_bidi_rq' include/scsi/scsi_cmnd.h:183: error: dereferencing pointer to incomplete type include/scsi/scsi_cmnd.h: In function 'scsi_in': include/scsi/scsi_cmnd.h:189: error: dereferencing pointer to incomplete type Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- fs/compat_ioctl.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 97dba0d92348..c54eaab71a19 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -69,9 +69,11 @@ #include #include +#ifdef CONFIG_BLOCK #include #include #include +#endif #include #include @@ -2024,6 +2026,7 @@ COMPATIBLE_IOCTL(GIO_UNISCRNMAP) COMPATIBLE_IOCTL(PIO_UNISCRNMAP) COMPATIBLE_IOCTL(PIO_FONTRESET) COMPATIBLE_IOCTL(PIO_UNIMAPCLR) +#ifdef CONFIG_BLOCK /* Big S */ COMPATIBLE_IOCTL(SCSI_IOCTL_GET_IDLUN) COMPATIBLE_IOCTL(SCSI_IOCTL_DOORLOCK) @@ -2033,6 +2036,7 @@ COMPATIBLE_IOCTL(SCSI_IOCTL_GET_BUS_NUMBER) COMPATIBLE_IOCTL(SCSI_IOCTL_SEND_COMMAND) COMPATIBLE_IOCTL(SCSI_IOCTL_PROBE_HOST) COMPATIBLE_IOCTL(SCSI_IOCTL_GET_PCI) +#endif /* Big T */ COMPATIBLE_IOCTL(TUNSETNOCSUM) COMPATIBLE_IOCTL(TUNSETDEBUG) @@ -2103,6 +2107,7 @@ COMPATIBLE_IOCTL(SIOCGIFVLAN) COMPATIBLE_IOCTL(SIOCSIFVLAN) COMPATIBLE_IOCTL(SIOCBRADDBR) COMPATIBLE_IOCTL(SIOCBRDELBR) +#ifdef CONFIG_BLOCK /* SG stuff */ COMPATIBLE_IOCTL(SG_SET_TIMEOUT) COMPATIBLE_IOCTL(SG_GET_TIMEOUT) @@ -2127,6 +2132,7 @@ COMPATIBLE_IOCTL(SG_SCSI_RESET) COMPATIBLE_IOCTL(SG_GET_REQUEST_TABLE) COMPATIBLE_IOCTL(SG_SET_KEEP_ORPHAN) COMPATIBLE_IOCTL(SG_GET_KEEP_ORPHAN) +#endif /* PPP stuff */ COMPATIBLE_IOCTL(PPPIOCGFLAGS) COMPATIBLE_IOCTL(PPPIOCSFLAGS) -- cgit v1.2.3 From 26d46867b7d27f68a446b073dac7817721ae4c8f Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 29 Apr 2008 02:35:48 -0400 Subject: fix a deadlock issue when poking "eject" file "/sys/devices/LNXSYSTM:00/.../eject" is used to evaluate _EJx method and eject a device in user space. But system hangs when poking the "eject" file because that the device hot-removal code invoke the driver .remove method which will try to remove the "eject" file as a result. Queues the hot-removal function for deferred execution in this patch. http://bugzilla.kernel.org/show_bug.cgi?id=9772 Signed-off-by: Zhang Rui Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/scan.c | 56 ++++++++++++++++++++++++++++++----------------------- 1 file changed, 32 insertions(+), 24 deletions(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 6d85289f1c12..9a84ed250d9f 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #include /* for acpi_ex_eisa_id_to_string() */ @@ -92,17 +93,37 @@ acpi_device_modalias_show(struct device *dev, struct device_attribute *attr, cha } static DEVICE_ATTR(modalias, 0444, acpi_device_modalias_show, NULL); -static int acpi_eject_operation(acpi_handle handle, int lockable) +static int acpi_bus_hot_remove_device(void *context) { + struct acpi_device *device; + acpi_handle handle = context; struct acpi_object_list arg_list; union acpi_object arg; acpi_status status = AE_OK; - /* - * TBD: evaluate _PS3? - */ + if (acpi_bus_get_device(handle, &device)) + return 0; - if (lockable) { + if (!device) + return 0; + + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Hot-removing device %s...\n", device->dev.bus_id)); + + + if (acpi_bus_trim(device, 1)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Removing device failed\n")); + return -1; + } + + /* power off device */ + status = acpi_evaluate_object(handle, "_PS3", NULL, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) + ACPI_DEBUG_PRINT((ACPI_DB_WARN, + "Power-off device failed\n")); + + if (device->flags.lockable) { arg_list.count = 1; arg_list.pointer = &arg; arg.type = ACPI_TYPE_INTEGER; @@ -118,24 +139,19 @@ static int acpi_eject_operation(acpi_handle handle, int lockable) /* * TBD: _EJD support. */ - status = acpi_evaluate_object(handle, "_EJ0", &arg_list, NULL); - if (ACPI_FAILURE(status)) { - return (-ENODEV); - } + if (ACPI_FAILURE(status)) + return -ENODEV; - return (0); + return 0; } static ssize_t acpi_eject_store(struct device *d, struct device_attribute *attr, const char *buf, size_t count) { - int result; int ret = count; - int islockable; acpi_status status; - acpi_handle handle; acpi_object_type type = 0; struct acpi_device *acpi_device = to_acpi_device(d); @@ -154,17 +170,9 @@ acpi_eject_store(struct device *d, struct device_attribute *attr, goto err; } - islockable = acpi_device->flags.lockable; - handle = acpi_device->handle; - - result = acpi_bus_trim(acpi_device, 1); - - if (!result) - result = acpi_eject_operation(handle, islockable); - - if (result) { - ret = -EBUSY; - } + /* remove the device in another thread to fix the deadlock issue */ + ret = kernel_thread(acpi_bus_hot_remove_device, + acpi_device->handle, SIGCHLD); err: return ret; } -- cgit v1.2.3 From b62b8ef906cdf7115af579ce7378886ce3e0ce00 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 29 Apr 2008 02:35:56 -0400 Subject: force offline the processor during hot-removal The ACPI device node for the cpu has already been unregistered when acpi_processor_handle_eject is called. Thus we should offline the cpu and continue, rather than a failure here. http://bugzilla.kernel.org/show_bug.cgi?id=9772 Signed-off-by: Zhang Rui Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/processor_core.c | 6 +++--- kernel/cpu.c | 1 + 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 9dd0fa93b9e1..1c0008edccda 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -1014,9 +1014,9 @@ static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu) static int acpi_processor_handle_eject(struct acpi_processor *pr) { - if (cpu_online(pr->id)) { - return (-EINVAL); - } + if (cpu_online(pr->id)) + cpu_down(pr->id); + arch_unregister_cpu(pr->id); acpi_unmap_lsapic(pr->id); return (0); diff --git a/kernel/cpu.c b/kernel/cpu.c index b11f06dc149a..cfb1d43ab801 100644 --- a/kernel/cpu.c +++ b/kernel/cpu.c @@ -299,6 +299,7 @@ int __ref cpu_down(unsigned int cpu) cpu_maps_update_done(); return err; } +EXPORT_SYMBOL(cpu_down); #endif /*CONFIG_HOTPLUG_CPU*/ /* Requires cpu_add_remove_lock to be held */ -- cgit v1.2.3 From 9f1eb99c757939b0b1783f926130993e9c298bae Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 29 Apr 2008 02:36:07 -0400 Subject: create sysfs link from acpi device to sysdev for cpu Sys I/F under acpi device node and sysdev device node are both needed for cpu hot-removal. User space need this link so that they know they are poking the sys I/F for the same cpu. http://bugzilla.kernel.org/show_bug.cgi?id=9772 Signed-off-by: Zhang Rui Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/processor_core.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 1c0008edccda..feddc8ed870a 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -621,7 +621,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) int result = 0; acpi_status status = AE_OK; struct acpi_processor *pr; - + struct sys_device *sysdev; pr = acpi_driver_data(device); @@ -652,6 +652,10 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) if (result) goto end; + sysdev = get_cpu_sysdev(pr->id); + if (sysfs_create_link(&device->dev.kobj, &sysdev->kobj, "sysdev")) + return -EFAULT; + status = acpi_install_notify_handler(pr->handle, ACPI_DEVICE_NOTIFY, acpi_processor_notify, pr); @@ -810,6 +814,8 @@ static int acpi_processor_remove(struct acpi_device *device, int type) status = acpi_remove_notify_handler(pr->handle, ACPI_DEVICE_NOTIFY, acpi_processor_notify); + sysfs_remove_link(&device->dev.kobj, "sysdev"); + acpi_processor_remove_fs(device); if (pr->cdev) { -- cgit v1.2.3 From 5411552c707f4b7387ad63141ef3a559e7488091 Mon Sep 17 00:00:00 2001 From: Cezary Jackiewicz Date: Mon, 9 Jun 2008 16:22:22 -0700 Subject: misc,acpi,backlight: compal Laptop Extras This is driver for Compal Laptop: FL90/IFL90, based on MSI driver. This driver exports a few files in /sys/devices/platform/compal-laptop/: lcd_level - screen brightness: contains a single integer in the range 0..7 (rw) wlan - wlan subsystem state: contains 0 or 1 (rw) bluetooth - bluetooth subsystem state: contains 0 or 1 (rw) raw - raw value taken from embedded controller register (ro) In addition to these platform device attributes the driver registers itself in the Linux backlight control subsystem and is available to userspace under /sys/class/backlight/compal-laptop/. Signed-off-by: Cezary Jackiewicz Signed-off-by: Andi Kleen Cc: Richard Purdie Cc: Henrique de Moraes Holschuh Cc: Len Brown Cc: Alexey Starikovskiy Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- MAINTAINERS | 5 + drivers/misc/Kconfig | 17 ++ drivers/misc/Makefile | 5 +- drivers/misc/compal-laptop.c | 437 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 462 insertions(+), 2 deletions(-) create mode 100644 drivers/misc/compal-laptop.c diff --git a/MAINTAINERS b/MAINTAINERS index ee1c56a20750..2bfde0326300 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1160,6 +1160,11 @@ M: scott@spiteful.org L: pcihpd-discuss@lists.sourceforge.net S: Supported +COMPAL LAPTOP SUPPORT +P: Cezary Jackiewicz +M: cezary.jackiewicz@gmail.com +S: Maintained + COMPUTONE INTELLIPORT MULTIPORT CARD P: Michael H. Warfield M: mhw@wittsend.com diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 636af2862308..7fce0da86548 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -219,6 +219,23 @@ config MSI_LAPTOP If you have an MSI S270 laptop, say Y or M here. +config COMPAL_LAPTOP + tristate "Compal Laptop Extras" + depends on X86 + depends on ACPI_EC + depends on BACKLIGHT_CLASS_DEVICE + ---help--- + This is a driver for laptops built by Compal: + + Compal FL90/IFL90 + Compal FL91/IFL91 + Compal FL92/JFL92 + Compal FT00/IFT00 + + It adds support for Bluetooth, WLAN and LCD brightness control. + + If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here. + config SONY_LAPTOP tristate "Sony Laptop Extras" depends on X86 && ACPI diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 1952875a272e..a6dac6a2e7e5 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -5,10 +5,11 @@ obj- := misc.o # Dummy rule to force built-in.o to be made obj-$(CONFIG_IBM_ASM) += ibmasm/ obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/ -obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o -obj-$(CONFIG_ACER_WMI) += acer-wmi.o obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o +obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o +obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o +obj-$(CONFIG_ACER_WMI) += acer-wmi.o obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o diff --git a/drivers/misc/compal-laptop.c b/drivers/misc/compal-laptop.c new file mode 100644 index 000000000000..0c1f5875fbb9 --- /dev/null +++ b/drivers/misc/compal-laptop.c @@ -0,0 +1,437 @@ +/*-*-linux-c-*-*/ + +/* + Copyright (C) 2008 Cezary Jackiewicz + + based on MSI driver + + Copyright (C) 2006 Lennart Poettering + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. + */ + +/* + * comapl-laptop.c - Compal laptop support. + * + * This driver exports a few files in /sys/devices/platform/compal-laptop/: + * + * lcd_level - Screen brightness: contains a single integer in the + * range 0..7. (rw) + * + * wlan - wlan subsystem state: contains 0 or 1 (rw) + * + * bluetooth - Bluetooth subsystem state: contains 0 or 1 (rw) + * + * raw - raw value taken from embedded controller register (ro) + * + * In addition to these platform device attributes the driver + * registers itself in the Linux backlight control subsystem and is + * available to userspace under /sys/class/backlight/compal-laptop/. + * + * This driver might work on other laptops produced by Compal. If you + * want to try it you can pass force=1 as argument to the module which + * will force it to load even when the DMI data doesn't identify the + * laptop as IFL90. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define COMPAL_DRIVER_VERSION "0.2.5" + +#define COMPAL_LCD_LEVEL_MAX 8 + +#define COMPAL_EC_COMMAND_WIRELESS 0xBB +#define COMPAL_EC_COMMAND_LCD_LEVEL 0xB9 + +#define KILLSWITCH_MASK 0x10 +#define WLAN_MASK 0x01 +#define BT_MASK 0x02 + +static int force; +module_param(force, bool, 0); +MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); + +/* Hardware access */ + +static int set_lcd_level(int level) +{ + if (level < 0 || level >= COMPAL_LCD_LEVEL_MAX) + return -EINVAL; + + ec_write(COMPAL_EC_COMMAND_LCD_LEVEL, level); + + return 0; +} + +static int get_lcd_level(void) +{ + u8 result; + + ec_read(COMPAL_EC_COMMAND_LCD_LEVEL, &result); + + return (int) result; +} + +static int set_wlan_state(int state) +{ + u8 result, value; + + ec_read(COMPAL_EC_COMMAND_WIRELESS, &result); + + if ((result & KILLSWITCH_MASK) == 0) + return -EINVAL; + else { + if (state) + value = (u8) (result | WLAN_MASK); + else + value = (u8) (result & ~WLAN_MASK); + ec_write(COMPAL_EC_COMMAND_WIRELESS, value); + } + + return 0; +} + +static int set_bluetooth_state(int state) +{ + u8 result, value; + + ec_read(COMPAL_EC_COMMAND_WIRELESS, &result); + + if ((result & KILLSWITCH_MASK) == 0) + return -EINVAL; + else { + if (state) + value = (u8) (result | BT_MASK); + else + value = (u8) (result & ~BT_MASK); + ec_write(COMPAL_EC_COMMAND_WIRELESS, value); + } + + return 0; +} + +static int get_wireless_state(int *wlan, int *bluetooth) +{ + u8 result; + + ec_read(COMPAL_EC_COMMAND_WIRELESS, &result); + + if (wlan) { + if ((result & KILLSWITCH_MASK) == 0) + *wlan = 0; + else + *wlan = result & WLAN_MASK; + } + + if (bluetooth) { + if ((result & KILLSWITCH_MASK) == 0) + *bluetooth = 0; + else + *bluetooth = (result & BT_MASK) >> 1; + } + + return 0; +} + +/* Backlight device stuff */ + +static int bl_get_brightness(struct backlight_device *b) +{ + return get_lcd_level(); +} + + +static int bl_update_status(struct backlight_device *b) +{ + return set_lcd_level(b->props.brightness); +} + +static struct backlight_ops compalbl_ops = { + .get_brightness = bl_get_brightness, + .update_status = bl_update_status, +}; + +static struct backlight_device *compalbl_device; + +/* Platform device */ + +static ssize_t show_wlan(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret, enabled; + + ret = get_wireless_state(&enabled, NULL); + if (ret < 0) + return ret; + + return sprintf(buf, "%i\n", enabled); +} + +static ssize_t show_raw(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u8 result; + + ec_read(COMPAL_EC_COMMAND_WIRELESS, &result); + + return sprintf(buf, "%i\n", result); +} + +static ssize_t show_bluetooth(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret, enabled; + + ret = get_wireless_state(NULL, &enabled); + if (ret < 0) + return ret; + + return sprintf(buf, "%i\n", enabled); +} + +static ssize_t show_lcd_level(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret; + + ret = get_lcd_level(); + if (ret < 0) + return ret; + + return sprintf(buf, "%i\n", ret); +} + +static ssize_t store_lcd_level(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int level, ret; + + if (sscanf(buf, "%i", &level) != 1 || + (level < 0 || level >= COMPAL_LCD_LEVEL_MAX)) + return -EINVAL; + + ret = set_lcd_level(level); + if (ret < 0) + return ret; + + return count; +} + +static ssize_t store_wlan_state(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int state, ret; + + if (sscanf(buf, "%i", &state) != 1 || (state < 0 || state > 1)) + return -EINVAL; + + ret = set_wlan_state(state); + if (ret < 0) + return ret; + + return count; +} + +static ssize_t store_bluetooth_state(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + int state, ret; + + if (sscanf(buf, "%i", &state) != 1 || (state < 0 || state > 1)) + return -EINVAL; + + ret = set_bluetooth_state(state); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR(lcd_level, 0644, show_lcd_level, store_lcd_level); +static DEVICE_ATTR(bluetooth, 0644, show_bluetooth, store_bluetooth_state); +static DEVICE_ATTR(wlan, 0644, show_wlan, store_wlan_state); +static DEVICE_ATTR(raw, 0444, show_raw, NULL); + +static struct attribute *compal_attributes[] = { + &dev_attr_lcd_level.attr, + &dev_attr_bluetooth.attr, + &dev_attr_wlan.attr, + &dev_attr_raw.attr, + NULL +}; + +static struct attribute_group compal_attribute_group = { + .attrs = compal_attributes +}; + +static struct platform_driver compal_driver = { + .driver = { + .name = "compal-laptop", + .owner = THIS_MODULE, + } +}; + +static struct platform_device *compal_device; + +/* Initialization */ + +static int dmi_check_cb(const struct dmi_system_id *id) +{ + printk(KERN_INFO "compal-laptop: Identified laptop model '%s'.\n", + id->ident); + + return 0; +} + +static struct dmi_system_id __initdata compal_dmi_table[] = { + { + .ident = "FL90/IFL90", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "IFL90"), + DMI_MATCH(DMI_BOARD_VERSION, "IFT00"), + }, + .callback = dmi_check_cb + }, + { + .ident = "FL90/IFL90", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "IFL90"), + DMI_MATCH(DMI_BOARD_VERSION, "REFERENCE"), + }, + .callback = dmi_check_cb + }, + { + .ident = "FL91/IFL91", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "IFL91"), + DMI_MATCH(DMI_BOARD_VERSION, "IFT00"), + }, + .callback = dmi_check_cb + }, + { + .ident = "FL92/JFL92", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "JFL92"), + DMI_MATCH(DMI_BOARD_VERSION, "IFT00"), + }, + .callback = dmi_check_cb + }, + { + .ident = "FT00/IFT00", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "IFT00"), + DMI_MATCH(DMI_BOARD_VERSION, "IFT00"), + }, + .callback = dmi_check_cb + }, + { } +}; + +static int __init compal_init(void) +{ + int ret; + + if (acpi_disabled) + return -ENODEV; + + if (!force && !dmi_check_system(compal_dmi_table)) + return -ENODEV; + + /* Register backlight stuff */ + + compalbl_device = backlight_device_register("compal-laptop", NULL, NULL, + &compalbl_ops); + if (IS_ERR(compalbl_device)) + return PTR_ERR(compalbl_device); + + compalbl_device->props.max_brightness = COMPAL_LCD_LEVEL_MAX-1; + + ret = platform_driver_register(&compal_driver); + if (ret) + goto fail_backlight; + + /* Register platform stuff */ + + compal_device = platform_device_alloc("compal-laptop", -1); + if (!compal_device) { + ret = -ENOMEM; + goto fail_platform_driver; + } + + ret = platform_device_add(compal_device); + if (ret) + goto fail_platform_device1; + + ret = sysfs_create_group(&compal_device->dev.kobj, + &compal_attribute_group); + if (ret) + goto fail_platform_device2; + + printk(KERN_INFO "compal-laptop: driver "COMPAL_DRIVER_VERSION + " successfully loaded.\n"); + + return 0; + +fail_platform_device2: + + platform_device_del(compal_device); + +fail_platform_device1: + + platform_device_put(compal_device); + +fail_platform_driver: + + platform_driver_unregister(&compal_driver); + +fail_backlight: + + backlight_device_unregister(compalbl_device); + + return ret; +} + +static void __exit compal_cleanup(void) +{ + + sysfs_remove_group(&compal_device->dev.kobj, &compal_attribute_group); + platform_device_unregister(compal_device); + platform_driver_unregister(&compal_driver); + backlight_device_unregister(compalbl_device); + + printk(KERN_INFO "compal-laptop: driver unloaded.\n"); +} + +module_init(compal_init); +module_exit(compal_cleanup); + +MODULE_AUTHOR("Cezary Jackiewicz"); +MODULE_DESCRIPTION("Compal Laptop Support"); +MODULE_VERSION(COMPAL_DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +MODULE_ALIAS("dmi:*:rnIFL90:rvrIFT00:*"); +MODULE_ALIAS("dmi:*:rnIFL90:rvrREFERENCE:*"); +MODULE_ALIAS("dmi:*:rnIFL91:rvrIFT00:*"); +MODULE_ALIAS("dmi:*:rnJFL92:rvrIFT00:*"); +MODULE_ALIAS("dmi:*:rnIFT00:rvrIFT00:*"); -- cgit v1.2.3 From 706546d02384b64e083bd9130c56eaa599c66038 Mon Sep 17 00:00:00 2001 From: Mike Travis Date: Mon, 9 Jun 2008 16:22:23 -0700 Subject: ACPI: change processors from array to per_cpu variable Change processors from an array sized by NR_CPUS to a per_cpu variable. Signed-off-by: Mike Travis Signed-off-by: Andrew Morton Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/processor_core.c | 20 +++++++++----------- drivers/acpi/processor_idle.c | 8 ++++---- drivers/acpi/processor_perflib.c | 18 +++++++++--------- drivers/acpi/processor_throttling.c | 14 +++++++------- include/acpi/processor.h | 2 +- 5 files changed, 30 insertions(+), 32 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index feddc8ed870a..9a803f85ccfe 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -118,7 +118,7 @@ static const struct file_operations acpi_processor_info_fops = { .release = single_release, }; -struct acpi_processor *processors[NR_CPUS]; +DEFINE_PER_CPU(struct acpi_processor *, processors); struct acpi_processor_errata errata __read_mostly; /* -------------------------------------------------------------------------- @@ -614,7 +614,7 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid) return 0; } -static void *processor_device_array[NR_CPUS]; +static DEFINE_PER_CPU(void *, processor_device_array); static int __cpuinit acpi_processor_start(struct acpi_device *device) { @@ -638,15 +638,15 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device) * ACPI id of processors can be reported wrongly by the BIOS. * Don't trust it blindly */ - if (processor_device_array[pr->id] != NULL && - processor_device_array[pr->id] != device) { + if (per_cpu(processor_device_array, pr->id) != NULL && + per_cpu(processor_device_array, pr->id) != device) { printk(KERN_WARNING "BIOS reported wrong ACPI id " "for the processor\n"); return -ENODEV; } - processor_device_array[pr->id] = device; + per_cpu(processor_device_array, pr->id) = device; - processors[pr->id] = pr; + per_cpu(processors, pr->id) = pr; result = acpi_processor_add_fs(device); if (result) @@ -753,7 +753,7 @@ static int acpi_cpu_soft_notify(struct notifier_block *nfb, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned long)hcpu; - struct acpi_processor *pr = processors[cpu]; + struct acpi_processor *pr = per_cpu(processors, cpu); if (action == CPU_ONLINE && pr) { acpi_processor_ppc_has_changed(pr); @@ -825,8 +825,8 @@ static int acpi_processor_remove(struct acpi_device *device, int type) pr->cdev = NULL; } - processors[pr->id] = NULL; - processor_device_array[pr->id] = NULL; + per_cpu(processors, pr->id) = NULL; + per_cpu(processor_device_array, pr->id) = NULL; kfree(pr); return 0; @@ -1074,8 +1074,6 @@ static int __init acpi_processor_init(void) { int result = 0; - - memset(&processors, 0, sizeof(processors)); memset(&errata, 0, sizeof(errata)); #ifdef CONFIG_SMP diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 4976e5db2b3f..0fc310e7dfd6 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -401,7 +401,7 @@ static void acpi_processor_idle(void) */ local_irq_disable(); - pr = processors[smp_processor_id()]; + pr = __get_cpu_var(processors); if (!pr) { local_irq_enable(); return; @@ -1431,7 +1431,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev, struct acpi_processor *pr; struct acpi_processor_cx *cx = cpuidle_get_statedata(state); - pr = processors[smp_processor_id()]; + pr = __get_cpu_var(processors); if (unlikely(!pr)) return 0; @@ -1471,7 +1471,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, u32 t1, t2; int sleep_ticks = 0; - pr = processors[smp_processor_id()]; + pr = __get_cpu_var(processors); if (unlikely(!pr)) return 0; @@ -1549,7 +1549,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, u32 t1, t2; int sleep_ticks = 0; - pr = processors[smp_processor_id()]; + pr = __get_cpu_var(processors); if (unlikely(!pr)) return 0; diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index d80b2d1441af..b4749969c6b4 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -89,7 +89,7 @@ static int acpi_processor_ppc_notifier(struct notifier_block *nb, if (event != CPUFREQ_INCOMPATIBLE) goto out; - pr = processors[policy->cpu]; + pr = per_cpu(processors, policy->cpu); if (!pr || !pr->performance) goto out; @@ -572,7 +572,7 @@ int acpi_processor_preregister_performance( /* Call _PSD for all CPUs */ for_each_possible_cpu(i) { - pr = processors[i]; + pr = per_cpu(processors, i); if (!pr) { /* Look only at processors in ACPI namespace */ continue; @@ -603,7 +603,7 @@ int acpi_processor_preregister_performance( * domain info. */ for_each_possible_cpu(i) { - pr = processors[i]; + pr = per_cpu(processors, i); if (!pr) continue; @@ -624,7 +624,7 @@ int acpi_processor_preregister_performance( cpus_clear(covered_cpus); for_each_possible_cpu(i) { - pr = processors[i]; + pr = per_cpu(processors, i); if (!pr) continue; @@ -651,7 +651,7 @@ int acpi_processor_preregister_performance( if (i == j) continue; - match_pr = processors[j]; + match_pr = per_cpu(processors, j); if (!match_pr) continue; @@ -680,7 +680,7 @@ int acpi_processor_preregister_performance( if (i == j) continue; - match_pr = processors[j]; + match_pr = per_cpu(processors, j); if (!match_pr) continue; @@ -697,7 +697,7 @@ int acpi_processor_preregister_performance( err_ret: for_each_possible_cpu(i) { - pr = processors[i]; + pr = per_cpu(processors, i); if (!pr || !pr->performance) continue; @@ -728,7 +728,7 @@ acpi_processor_register_performance(struct acpi_processor_performance mutex_lock(&performance_mutex); - pr = processors[cpu]; + pr = per_cpu(processors, cpu); if (!pr) { mutex_unlock(&performance_mutex); return -ENODEV; @@ -766,7 +766,7 @@ acpi_processor_unregister_performance(struct acpi_processor_performance mutex_lock(&performance_mutex); - pr = processors[cpu]; + pr = per_cpu(processors, cpu); if (!pr) { mutex_unlock(&performance_mutex); return; diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index bb06738860c4..8728782aad3b 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -71,7 +71,7 @@ static int acpi_processor_update_tsd_coord(void) * coordination between all CPUs. */ for_each_possible_cpu(i) { - pr = processors[i]; + pr = per_cpu(processors, i); if (!pr) continue; @@ -93,7 +93,7 @@ static int acpi_processor_update_tsd_coord(void) cpus_clear(covered_cpus); for_each_possible_cpu(i) { - pr = processors[i]; + pr = per_cpu(processors, i); if (!pr) continue; @@ -119,7 +119,7 @@ static int acpi_processor_update_tsd_coord(void) if (i == j) continue; - match_pr = processors[j]; + match_pr = per_cpu(processors, j); if (!match_pr) continue; @@ -152,7 +152,7 @@ static int acpi_processor_update_tsd_coord(void) if (i == j) continue; - match_pr = processors[j]; + match_pr = per_cpu(processors, j); if (!match_pr) continue; @@ -172,7 +172,7 @@ static int acpi_processor_update_tsd_coord(void) err_ret: for_each_possible_cpu(i) { - pr = processors[i]; + pr = per_cpu(processors, i); if (!pr) continue; @@ -214,7 +214,7 @@ static int acpi_processor_throttling_notifier(unsigned long event, void *data) struct acpi_processor_throttling *p_throttling; cpu = p_tstate->cpu; - pr = processors[cpu]; + pr = per_cpu(processors, cpu); if (!pr) { ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Invalid pr pointer\n")); return 0; @@ -1035,7 +1035,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr, int state) * cpus. */ for_each_cpu_mask(i, online_throttling_cpus) { - match_pr = processors[i]; + match_pr = per_cpu(processors, i); /* * If the pointer is invalid, we will report the * error message and continue. diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 06ebb6ef72aa..3795590e152a 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -255,7 +255,7 @@ extern void acpi_processor_unregister_performance(struct int acpi_processor_notify_smm(struct module *calling_module); /* for communication between multiple parts of the processor kernel module */ -extern struct acpi_processor *processors[NR_CPUS]; +DECLARE_PER_CPU(struct acpi_processor *, processors); extern struct acpi_processor_errata errata; void arch_acpi_processor_init_pdc(struct acpi_processor *pr); -- cgit v1.2.3 From 20b937343e55c16e37b1a4ad2176760b4a11002c Mon Sep 17 00:00:00 2001 From: Jonathan Woithe Date: Wed, 11 Jun 2008 10:14:56 +0930 Subject: Fujitsu-laptop update Add additional capabilities to the Fujitsu-laptop driver. * Brightness hotkey actions are sent to userspace. This can be disabled using a module parameter if it causes issues with models which handle these keys transparently in the BIOS. * Actions of additional hotkeys found on some Fujitsu models (eg: the suspend key and the dedicated "power on passphrase" keys) are broadcast to userspace. * An alternative brightness control method used by some Fujitsu models (for example, the S6410) is now supported, enabling software brightness controls on models using this method. * DMI-based module aliases are configured for the S6410 and S7020. * The current LCD brightness after booting should now be reflected in the standard backlight interface sysfs file (previously it was always set to 0). The platform brightness sysfs interface has always been fine. Thanks go to Peter Gruber who provided a significant portion of this code and tested various iterations of the patch on his S6410. Signed-off-by: Peter Gruber Signed-off-by: Jonathan Woithe Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- MAINTAINERS | 6 + drivers/misc/Kconfig | 13 +- drivers/misc/fujitsu-laptop.c | 825 +++++++++++++++++++++++++++++++++++++++--- 3 files changed, 792 insertions(+), 52 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 2bfde0326300..ec5c8ee30907 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1792,6 +1792,12 @@ P: David Howells M: dhowells@redhat.com S: Maintained +FUJITSU LAPTOP EXTRAS +P: Jonathan Woithe +M: jwoithe@physics.adelaide.edu.au +L: linux-acpi@vger.kernel.org +S: Maintained + FUSE: FILESYSTEM IN USERSPACE P: Miklos Szeredi M: miklos@szeredi.hu diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 7fce0da86548..0551d95a749a 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -185,11 +185,22 @@ config FUJITSU_LAPTOP * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks * Possibly other Fujitsu laptop models + * Tested with S6410 and S7020 - It adds support for LCD brightness control. + It adds support for LCD brightness control and some hotkeys. If you have a Fujitsu laptop, say Y or M here. +config FUJITSU_LAPTOP_DEBUG + bool "Verbose debug mode for Fujitsu Laptop Extras" + depends on FUJITSU_LAPTOP + default n + ---help--- + Enables extra debug output from the fujitsu extras driver, at the + expense of a slight increase in driver size. + + If you are not sure, say N here. + config TC1100_WMI tristate "HP Compaq TC1100 Tablet WMI Extras (EXPERIMENTAL)" depends on X86 && !X86_64 diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index 6d14e8fe1537..7a1ef6c262de 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -1,12 +1,14 @@ /*-*-linux-c-*-*/ /* - Copyright (C) 2007 Jonathan Woithe + Copyright (C) 2007,2008 Jonathan Woithe + Copyright (C) 2008 Peter Gruber Based on earlier work: Copyright (C) 2003 Shane Spencer Adrian Yee - Templated from msi-laptop.c which is copyright by its respective authors. + Templated from msi-laptop.c and thinkpad_acpi.c which is copyright + by its respective authors. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -39,8 +41,17 @@ * registers itself in the Linux backlight control subsystem and is * available to userspace under /sys/class/backlight/fujitsu-laptop/. * - * This driver has been tested on a Fujitsu Lifebook S7020. It should - * work on most P-series and S-series Lifebooks, but YMMV. + * Hotkeys present on certain Fujitsu laptops (eg: the S6xxx series) are + * also supported by this driver. + * + * This driver has been tested on a Fujitsu Lifebook S6410 and S7020. It + * should work on most P-series and S-series Lifebooks, but YMMV. + * + * The module parameter use_alt_lcd_levels switches between different ACPI + * brightness controls which are used by different Fujitsu laptops. In most + * cases the correct method is automatically detected. "use_alt_lcd_levels=1" + * is applicable for a Fujitsu Lifebook S6410 if autodetection fails. + * */ #include @@ -49,30 +60,105 @@ #include #include #include +#include +#include +#include #include -#define FUJITSU_DRIVER_VERSION "0.3" +#define FUJITSU_DRIVER_VERSION "0.4.2" #define FUJITSU_LCD_N_LEVELS 8 #define ACPI_FUJITSU_CLASS "fujitsu" #define ACPI_FUJITSU_HID "FUJ02B1" -#define ACPI_FUJITSU_DRIVER_NAME "Fujitsu laptop FUJ02B1 ACPI extras driver" +#define ACPI_FUJITSU_DRIVER_NAME "Fujitsu laptop FUJ02B1 ACPI brightness driver" #define ACPI_FUJITSU_DEVICE_NAME "Fujitsu FUJ02B1" - +#define ACPI_FUJITSU_HOTKEY_HID "FUJ02E3" +#define ACPI_FUJITSU_HOTKEY_DRIVER_NAME "Fujitsu laptop FUJ02E3 ACPI hotkeys driver" +#define ACPI_FUJITSU_HOTKEY_DEVICE_NAME "Fujitsu FUJ02E3" + +#define ACPI_FUJITSU_NOTIFY_CODE1 0x80 + +#define ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS 0x86 +#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS 0x87 + +/* Hotkey details */ +#define LOCK_KEY 0x410 /* codes for the keys in the GIRB register */ +#define DISPLAY_KEY 0x411 /* keys are mapped to KEY_SCREENLOCK (the key with the key symbol) */ +#define ENERGY_KEY 0x412 /* KEY_MEDIA (the key with the laptop symbol, KEY_EMAIL (E key)) */ +#define REST_KEY 0x413 /* KEY_SUSPEND (R key) */ + +#define MAX_HOTKEY_RINGBUFFER_SIZE 100 +#define RINGBUFFERSIZE 40 + +/* Debugging */ +#define FUJLAPTOP_LOG ACPI_FUJITSU_HID ": " +#define FUJLAPTOP_ERR KERN_ERR FUJLAPTOP_LOG +#define FUJLAPTOP_NOTICE KERN_NOTICE FUJLAPTOP_LOG +#define FUJLAPTOP_INFO KERN_INFO FUJLAPTOP_LOG +#define FUJLAPTOP_DEBUG KERN_DEBUG FUJLAPTOP_LOG + +#define FUJLAPTOP_DBG_ALL 0xffff +#define FUJLAPTOP_DBG_ERROR 0x0001 +#define FUJLAPTOP_DBG_WARN 0x0002 +#define FUJLAPTOP_DBG_INFO 0x0004 +#define FUJLAPTOP_DBG_TRACE 0x0008 + +#define dbg_printk(a_dbg_level, format, arg...) \ + do { if (dbg_level & a_dbg_level) \ + printk(FUJLAPTOP_DEBUG "%s: " format, __func__ , ## arg); \ + } while (0) +#ifdef CONFIG_FUJITSU_LAPTOP_DEBUG +#define vdbg_printk(a_dbg_level, format, arg...) \ + dbg_printk(a_dbg_level, format, ## arg) +#else +#define vdbg_printk(a_dbg_level, format, arg...) +#endif + +/* Device controlling the backlight and associated keys */ struct fujitsu_t { acpi_handle acpi_handle; + struct acpi_device *dev; + struct input_dev *input; + char phys[32]; struct backlight_device *bl_device; struct platform_device *pf_device; - unsigned long fuj02b1_state; + unsigned int max_brightness; unsigned int brightness_changed; unsigned int brightness_level; }; static struct fujitsu_t *fujitsu; +static int use_alt_lcd_levels = -1; +static int disable_brightness_keys = -1; +static int disable_brightness_adjust = -1; + +/* Device used to access other hotkeys on the laptop */ +struct fujitsu_hotkey_t { + acpi_handle acpi_handle; + struct acpi_device *dev; + struct input_dev *input; + char phys[32]; + struct platform_device *pf_device; + struct kfifo *fifo; + spinlock_t fifo_lock; + + unsigned int irb; /* info about the pressed buttons */ +}; -/* Hardware access */ +static struct fujitsu_hotkey_t *fujitsu_hotkey; + +static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event, + void *data); + +#ifdef CONFIG_FUJITSU_LAPTOP_DEBUG +static u32 dbg_level = 0x03; +#endif + +static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data); + +/* Hardware access for LCD brightness control */ static int set_lcd_level(int level) { @@ -81,7 +167,10 @@ static int set_lcd_level(int level) struct acpi_object_list arg_list = { 1, &arg0 }; acpi_handle handle = NULL; - if (level < 0 || level >= FUJITSU_LCD_N_LEVELS) + vdbg_printk(FUJLAPTOP_DBG_TRACE, "set lcd level via SBLL [%d]\n", + level); + + if (level < 0 || level >= fujitsu->max_brightness) return -EINVAL; if (!fujitsu) @@ -89,7 +178,38 @@ static int set_lcd_level(int level) status = acpi_get_handle(fujitsu->acpi_handle, "SBLL", &handle); if (ACPI_FAILURE(status)) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "SBLL not present\n")); + vdbg_printk(FUJLAPTOP_DBG_ERROR, "SBLL not present\n"); + return -ENODEV; + } + + arg0.integer.value = level; + + status = acpi_evaluate_object(handle, NULL, &arg_list, NULL); + if (ACPI_FAILURE(status)) + return -ENODEV; + + return 0; +} + +static int set_lcd_level_alt(int level) +{ + acpi_status status = AE_OK; + union acpi_object arg0 = { ACPI_TYPE_INTEGER }; + struct acpi_object_list arg_list = { 1, &arg0 }; + acpi_handle handle = NULL; + + vdbg_printk(FUJLAPTOP_DBG_TRACE, "set lcd level via SBL2 [%d]\n", + level); + + if (level < 0 || level >= fujitsu->max_brightness) + return -EINVAL; + + if (!fujitsu) + return -EINVAL; + + status = acpi_get_handle(fujitsu->acpi_handle, "SBL2", &handle); + if (ACPI_FAILURE(status)) { + vdbg_printk(FUJLAPTOP_DBG_ERROR, "SBL2 not present\n"); return -ENODEV; } @@ -107,13 +227,52 @@ static int get_lcd_level(void) unsigned long state = 0; acpi_status status = AE_OK; - // Get the Brightness + vdbg_printk(FUJLAPTOP_DBG_TRACE, "get lcd level via GBLL\n"); + status = acpi_evaluate_integer(fujitsu->acpi_handle, "GBLL", NULL, &state); if (status < 0) return status; - fujitsu->fuj02b1_state = state; + fujitsu->brightness_level = state & 0x0fffffff; + + if (state & 0x80000000) + fujitsu->brightness_changed = 1; + else + fujitsu->brightness_changed = 0; + + return fujitsu->brightness_level; +} + +static int get_max_brightness(void) +{ + unsigned long state = 0; + acpi_status status = AE_OK; + + vdbg_printk(FUJLAPTOP_DBG_TRACE, "get max lcd level via RBLL\n"); + + status = + acpi_evaluate_integer(fujitsu->acpi_handle, "RBLL", NULL, &state); + if (status < 0) + return status; + + fujitsu->max_brightness = state; + + return fujitsu->max_brightness; +} + +static int get_lcd_level_alt(void) +{ + unsigned long state = 0; + acpi_status status = AE_OK; + + vdbg_printk(FUJLAPTOP_DBG_TRACE, "get lcd level via GBLS\n"); + + status = + acpi_evaluate_integer(fujitsu->acpi_handle, "GBLS", NULL, &state); + if (status < 0) + return status; + fujitsu->brightness_level = state & 0x0fffffff; if (state & 0x80000000) @@ -128,12 +287,18 @@ static int get_lcd_level(void) static int bl_get_brightness(struct backlight_device *b) { - return get_lcd_level(); + if (use_alt_lcd_levels) + return get_lcd_level_alt(); + else + return get_lcd_level(); } static int bl_update_status(struct backlight_device *b) { - return set_lcd_level(b->props.brightness); + if (use_alt_lcd_levels) + return set_lcd_level_alt(b->props.brightness); + else + return set_lcd_level(b->props.brightness); } static struct backlight_ops fujitsubl_ops = { @@ -141,7 +306,35 @@ static struct backlight_ops fujitsubl_ops = { .update_status = bl_update_status, }; -/* Platform device */ +/* Platform LCD brightness device */ + +static ssize_t +show_max_brightness(struct device *dev, + struct device_attribute *attr, char *buf) +{ + + int ret; + + ret = get_max_brightness(); + if (ret < 0) + return ret; + + return sprintf(buf, "%i\n", ret); +} + +static ssize_t +show_brightness_changed(struct device *dev, + struct device_attribute *attr, char *buf) +{ + + int ret; + + ret = fujitsu->brightness_changed; + if (ret < 0) + return ret; + + return sprintf(buf, "%i\n", ret); +} static ssize_t show_lcd_level(struct device *dev, struct device_attribute *attr, char *buf) @@ -149,7 +342,10 @@ static ssize_t show_lcd_level(struct device *dev, int ret; - ret = get_lcd_level(); + if (use_alt_lcd_levels) + ret = get_lcd_level_alt(); + else + ret = get_lcd_level(); if (ret < 0) return ret; @@ -164,19 +360,61 @@ static ssize_t store_lcd_level(struct device *dev, int level, ret; if (sscanf(buf, "%i", &level) != 1 - || (level < 0 || level >= FUJITSU_LCD_N_LEVELS)) + || (level < 0 || level >= fujitsu->max_brightness)) return -EINVAL; - ret = set_lcd_level(level); + if (use_alt_lcd_levels) + ret = set_lcd_level_alt(level); + else + ret = set_lcd_level(level); + if (ret < 0) + return ret; + + if (use_alt_lcd_levels) + ret = get_lcd_level_alt(); + else + ret = get_lcd_level(); if (ret < 0) return ret; return count; } +/* Hardware access for hotkey device */ + +static int get_irb(void) +{ + unsigned long state = 0; + acpi_status status = AE_OK; + + vdbg_printk(FUJLAPTOP_DBG_TRACE, "Get irb\n"); + + status = + acpi_evaluate_integer(fujitsu_hotkey->acpi_handle, "GIRB", NULL, + &state); + if (status < 0) + return status; + + fujitsu_hotkey->irb = state; + + return fujitsu_hotkey->irb; +} + +static ssize_t +ignore_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + return count; +} + +static DEVICE_ATTR(max_brightness, 0444, show_max_brightness, ignore_store); +static DEVICE_ATTR(brightness_changed, 0444, show_brightness_changed, + ignore_store); static DEVICE_ATTR(lcd_level, 0644, show_lcd_level, store_lcd_level); static struct attribute *fujitsupf_attributes[] = { + &dev_attr_brightness_changed.attr, + &dev_attr_max_brightness.attr, &dev_attr_lcd_level.attr, NULL }; @@ -192,14 +430,52 @@ static struct platform_driver fujitsupf_driver = { } }; -/* ACPI device */ +static int dmi_check_cb_s6410(const struct dmi_system_id *id) +{ + acpi_handle handle; + int have_blnf; + printk(KERN_INFO "fujitsu-laptop: Identified laptop model '%s'.\n", + id->ident); + have_blnf = ACPI_SUCCESS + (acpi_get_handle(NULL, "\\_SB.PCI0.GFX0.LCD.BLNF", &handle)); + if (use_alt_lcd_levels == -1) { + vdbg_printk(FUJLAPTOP_DBG_TRACE, "auto-detecting usealt\n"); + use_alt_lcd_levels = 1; + } + if (disable_brightness_keys == -1) { + vdbg_printk(FUJLAPTOP_DBG_TRACE, + "auto-detecting disable_keys\n"); + disable_brightness_keys = have_blnf ? 1 : 0; + } + if (disable_brightness_adjust == -1) { + vdbg_printk(FUJLAPTOP_DBG_TRACE, + "auto-detecting disable_adjust\n"); + disable_brightness_adjust = have_blnf ? 0 : 1; + } + return 0; +} + +static struct dmi_system_id __initdata fujitsu_dmi_table[] = { + { + .ident = "Fujitsu Siemens", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"), + }, + .callback = dmi_check_cb_s6410}, + {} +}; + +/* ACPI device for LCD brightness control */ static int acpi_fujitsu_add(struct acpi_device *device) { + acpi_status status; + acpi_handle handle; int result = 0; int state = 0; - - ACPI_FUNCTION_TRACE("acpi_fujitsu_add"); + struct input_dev *input; + int error; if (!device) return -EINVAL; @@ -209,10 +485,42 @@ static int acpi_fujitsu_add(struct acpi_device *device) sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS); acpi_driver_data(device) = fujitsu; + status = acpi_install_notify_handler(device->handle, + ACPI_DEVICE_NOTIFY, + acpi_fujitsu_notify, fujitsu); + + if (ACPI_FAILURE(status)) { + printk(KERN_ERR "Error installing notify handler\n"); + error = -ENODEV; + goto err_stop; + } + + fujitsu->input = input = input_allocate_device(); + if (!input) { + error = -ENOMEM; + goto err_uninstall_notify; + } + + snprintf(fujitsu->phys, sizeof(fujitsu->phys), + "%s/video/input0", acpi_device_hid(device)); + + input->name = acpi_device_name(device); + input->phys = fujitsu->phys; + input->id.bustype = BUS_HOST; + input->id.product = 0x06; + input->dev.parent = &device->dev; + input->evbit[0] = BIT(EV_KEY); + set_bit(KEY_BRIGHTNESSUP, input->keybit); + set_bit(KEY_BRIGHTNESSDOWN, input->keybit); + set_bit(KEY_UNKNOWN, input->keybit); + + error = input_register_device(input); + if (error) + goto err_free_input_dev; + result = acpi_bus_get_power(fujitsu->acpi_handle, &state); if (result) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Error reading power state\n")); + printk(KERN_ERR "Error reading power state\n"); goto end; } @@ -220,22 +528,373 @@ static int acpi_fujitsu_add(struct acpi_device *device) acpi_device_name(device), acpi_device_bid(device), !device->power.state ? "on" : "off"); - end: + fujitsu->dev = device; + + if (ACPI_SUCCESS + (acpi_get_handle(device->handle, METHOD_NAME__INI, &handle))) { + vdbg_printk(FUJLAPTOP_DBG_INFO, "Invoking _INI\n"); + if (ACPI_FAILURE + (acpi_evaluate_object + (device->handle, METHOD_NAME__INI, NULL, NULL))) + printk(KERN_ERR "_INI Method failed\n"); + } + + /* do config (detect defaults) */ + dmi_check_system(fujitsu_dmi_table); + use_alt_lcd_levels = use_alt_lcd_levels == 1 ? 1 : 0; + disable_brightness_keys = disable_brightness_keys == 1 ? 1 : 0; + disable_brightness_adjust = disable_brightness_adjust == 1 ? 1 : 0; + vdbg_printk(FUJLAPTOP_DBG_INFO, + "config: [alt interface: %d], [key disable: %d], [adjust disable: %d]\n", + use_alt_lcd_levels, disable_brightness_keys, + disable_brightness_adjust); + + if (get_max_brightness() <= 0) + fujitsu->max_brightness = FUJITSU_LCD_N_LEVELS; + if (use_alt_lcd_levels) + get_lcd_level_alt(); + else + get_lcd_level(); + + return result; + +end: +err_free_input_dev: + input_free_device(input); +err_uninstall_notify: + acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_fujitsu_notify); +err_stop: return result; } static int acpi_fujitsu_remove(struct acpi_device *device, int type) { - ACPI_FUNCTION_TRACE("acpi_fujitsu_remove"); + acpi_status status; + struct fujitsu_t *fujitsu = NULL; if (!device || !acpi_driver_data(device)) return -EINVAL; + + fujitsu = acpi_driver_data(device); + + status = acpi_remove_notify_handler(fujitsu->acpi_handle, + ACPI_DEVICE_NOTIFY, + acpi_fujitsu_notify); + + if (!device || !acpi_driver_data(device)) + return -EINVAL; + fujitsu->acpi_handle = NULL; return 0; } +/* Brightness notify */ + +static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data) +{ + struct input_dev *input; + int keycode; + int oldb, newb; + + input = fujitsu->input; + + switch (event) { + case ACPI_FUJITSU_NOTIFY_CODE1: + keycode = 0; + oldb = fujitsu->brightness_level; + get_lcd_level(); /* the alt version always yields changed */ + newb = fujitsu->brightness_level; + + vdbg_printk(FUJLAPTOP_DBG_TRACE, + "brightness button event [%i -> %i (%i)]\n", + oldb, newb, fujitsu->brightness_changed); + + if (oldb == newb && fujitsu->brightness_changed) { + keycode = 0; + if (disable_brightness_keys != 1) { + if (oldb == 0) { + acpi_bus_generate_proc_event(fujitsu-> + dev, + ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS, + 0); + keycode = KEY_BRIGHTNESSDOWN; + } else if (oldb == + (fujitsu->max_brightness) - 1) { + acpi_bus_generate_proc_event(fujitsu-> + dev, + ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS, + 0); + keycode = KEY_BRIGHTNESSUP; + } + } + } else if (oldb < newb) { + if (disable_brightness_adjust != 1) { + if (use_alt_lcd_levels) + set_lcd_level_alt(newb); + else + set_lcd_level(newb); + } + if (disable_brightness_keys != 1) { + acpi_bus_generate_proc_event(fujitsu->dev, + ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS, + 0); + keycode = KEY_BRIGHTNESSUP; + } + } else if (oldb > newb) { + if (disable_brightness_adjust != 1) { + if (use_alt_lcd_levels) + set_lcd_level_alt(newb); + else + set_lcd_level(newb); + } + if (disable_brightness_keys != 1) { + acpi_bus_generate_proc_event(fujitsu->dev, + ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS, + 0); + keycode = KEY_BRIGHTNESSDOWN; + } + } else { + keycode = KEY_UNKNOWN; + } + break; + default: + keycode = KEY_UNKNOWN; + vdbg_printk(FUJLAPTOP_DBG_WARN, + "unsupported event [0x%x]\n", event); + break; + } + + if (keycode != 0) { + input_report_key(input, keycode, 1); + input_sync(input); + input_report_key(input, keycode, 0); + input_sync(input); + } + + return; +} + +/* ACPI device for hotkey handling */ + +static int acpi_fujitsu_hotkey_add(struct acpi_device *device) +{ + acpi_status status; + acpi_handle handle; + int result = 0; + int state = 0; + struct input_dev *input; + int error; + int i; + + if (!device) + return -EINVAL; + + fujitsu_hotkey->acpi_handle = device->handle; + sprintf(acpi_device_name(device), "%s", + ACPI_FUJITSU_HOTKEY_DEVICE_NAME); + sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS); + acpi_driver_data(device) = fujitsu_hotkey; + + status = acpi_install_notify_handler(device->handle, + ACPI_DEVICE_NOTIFY, + acpi_fujitsu_hotkey_notify, + fujitsu_hotkey); + + if (ACPI_FAILURE(status)) { + printk(KERN_ERR "Error installing notify handler\n"); + error = -ENODEV; + goto err_stop; + } + + /* kfifo */ + spin_lock_init(&fujitsu_hotkey->fifo_lock); + fujitsu_hotkey->fifo = + kfifo_alloc(RINGBUFFERSIZE * sizeof(int), GFP_KERNEL, + &fujitsu_hotkey->fifo_lock); + if (IS_ERR(fujitsu_hotkey->fifo)) { + printk(KERN_ERR "kfifo_alloc failed\n"); + error = PTR_ERR(fujitsu_hotkey->fifo); + goto err_stop; + } + + fujitsu_hotkey->input = input = input_allocate_device(); + if (!input) { + error = -ENOMEM; + goto err_uninstall_notify; + } + + snprintf(fujitsu_hotkey->phys, sizeof(fujitsu_hotkey->phys), + "%s/video/input0", acpi_device_hid(device)); + + input->name = acpi_device_name(device); + input->phys = fujitsu_hotkey->phys; + input->id.bustype = BUS_HOST; + input->id.product = 0x06; + input->dev.parent = &device->dev; + input->evbit[0] = BIT(EV_KEY); + set_bit(KEY_SCREENLOCK, input->keybit); + set_bit(KEY_MEDIA, input->keybit); + set_bit(KEY_EMAIL, input->keybit); + set_bit(KEY_SUSPEND, input->keybit); + set_bit(KEY_UNKNOWN, input->keybit); + + error = input_register_device(input); + if (error) + goto err_free_input_dev; + + result = acpi_bus_get_power(fujitsu_hotkey->acpi_handle, &state); + if (result) { + printk(KERN_ERR "Error reading power state\n"); + goto end; + } + + printk(KERN_INFO PREFIX "%s [%s] (%s)\n", + acpi_device_name(device), acpi_device_bid(device), + !device->power.state ? "on" : "off"); + + fujitsu_hotkey->dev = device; + + if (ACPI_SUCCESS + (acpi_get_handle(device->handle, METHOD_NAME__INI, &handle))) { + vdbg_printk(FUJLAPTOP_DBG_INFO, "Invoking _INI\n"); + if (ACPI_FAILURE + (acpi_evaluate_object + (device->handle, METHOD_NAME__INI, NULL, NULL))) + printk(KERN_ERR "_INI Method failed\n"); + } + + i = 0; /* Discard hotkey ringbuffer */ + while (get_irb() != 0 && (i++) < MAX_HOTKEY_RINGBUFFER_SIZE) ; + vdbg_printk(FUJLAPTOP_DBG_INFO, "Discarded %i ringbuffer entries\n", i); + + return result; + +end: +err_free_input_dev: + input_free_device(input); +err_uninstall_notify: + acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, + acpi_fujitsu_hotkey_notify); + kfifo_free(fujitsu_hotkey->fifo); +err_stop: + + return result; +} + +static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type) +{ + acpi_status status; + struct fujitsu_hotkey_t *fujitsu_hotkey = NULL; + + if (!device || !acpi_driver_data(device)) + return -EINVAL; + + fujitsu_hotkey = acpi_driver_data(device); + + status = acpi_remove_notify_handler(fujitsu_hotkey->acpi_handle, + ACPI_DEVICE_NOTIFY, + acpi_fujitsu_hotkey_notify); + + fujitsu_hotkey->acpi_handle = NULL; + + kfifo_free(fujitsu_hotkey->fifo); + + return 0; +} + +static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event, + void *data) +{ + struct input_dev *input; + int keycode, keycode_r; + unsigned int irb = 1; + int i, status; + + input = fujitsu_hotkey->input; + + vdbg_printk(FUJLAPTOP_DBG_TRACE, "Hotkey event\n"); + + switch (event) { + case ACPI_FUJITSU_NOTIFY_CODE1: + i = 0; + while ((irb = get_irb()) != 0 + && (i++) < MAX_HOTKEY_RINGBUFFER_SIZE) { + vdbg_printk(FUJLAPTOP_DBG_TRACE, "GIRB result [%x]\n", + irb); + + switch (irb & 0x4ff) { + case LOCK_KEY: + keycode = KEY_SCREENLOCK; + break; + case DISPLAY_KEY: + keycode = KEY_MEDIA; + break; + case ENERGY_KEY: + keycode = KEY_EMAIL; + break; + case REST_KEY: + keycode = KEY_SUSPEND; + break; + case 0: + keycode = 0; + break; + default: + vdbg_printk(FUJLAPTOP_DBG_WARN, + "Unknown GIRB result [%x]\n", irb); + keycode = -1; + break; + } + if (keycode > 0) { + vdbg_printk(FUJLAPTOP_DBG_TRACE, + "Push keycode into ringbuffer [%d]\n", + keycode); + status = kfifo_put(fujitsu_hotkey->fifo, + (unsigned char *)&keycode, + sizeof(keycode)); + if (status != sizeof(keycode)) { + vdbg_printk(FUJLAPTOP_DBG_WARN, + "Could not push keycode [0x%x]\n", + keycode); + } else { + input_report_key(input, keycode, 1); + input_sync(input); + } + } else if (keycode == 0) { + while ((status = + kfifo_get + (fujitsu_hotkey->fifo, (unsigned char *) + &keycode_r, + sizeof + (keycode_r))) == sizeof(keycode_r)) { + input_report_key(input, keycode_r, 0); + input_sync(input); + vdbg_printk(FUJLAPTOP_DBG_TRACE, + "Pop keycode from ringbuffer [%d]\n", + keycode_r); + } + } + } + + break; + default: + keycode = KEY_UNKNOWN; + vdbg_printk(FUJLAPTOP_DBG_WARN, + "Unsupported event [0x%x]\n", event); + input_report_key(input, keycode, 1); + input_sync(input); + input_report_key(input, keycode, 0); + input_sync(input); + break; + } + + return; +} + +/* Initialization */ + static const struct acpi_device_id fujitsu_device_ids[] = { {ACPI_FUJITSU_HID, 0}, {"", 0}, @@ -251,11 +910,24 @@ static struct acpi_driver acpi_fujitsu_driver = { }, }; -/* Initialization */ +static const struct acpi_device_id fujitsu_hotkey_device_ids[] = { + {ACPI_FUJITSU_HOTKEY_HID, 0}, + {"", 0}, +}; + +static struct acpi_driver acpi_fujitsu_hotkey_driver = { + .name = ACPI_FUJITSU_HOTKEY_DRIVER_NAME, + .class = ACPI_FUJITSU_CLASS, + .ids = fujitsu_hotkey_device_ids, + .ops = { + .add = acpi_fujitsu_hotkey_add, + .remove = acpi_fujitsu_hotkey_remove, + }, +}; static int __init fujitsu_init(void) { - int ret, result; + int ret, result, max_brightness; if (acpi_disabled) return -ENODEV; @@ -271,19 +943,6 @@ static int __init fujitsu_init(void) goto fail_acpi; } - /* Register backlight stuff */ - - fujitsu->bl_device = - backlight_device_register("fujitsu-laptop", NULL, NULL, - &fujitsubl_ops); - if (IS_ERR(fujitsu->bl_device)) - return PTR_ERR(fujitsu->bl_device); - - fujitsu->bl_device->props.max_brightness = FUJITSU_LCD_N_LEVELS - 1; - ret = platform_driver_register(&fujitsupf_driver); - if (ret) - goto fail_backlight; - /* Register platform stuff */ fujitsu->pf_device = platform_device_alloc("fujitsu-laptop", -1); @@ -302,28 +961,68 @@ static int __init fujitsu_init(void) if (ret) goto fail_platform_device2; + /* Register backlight stuff */ + + fujitsu->bl_device = + backlight_device_register("fujitsu-laptop", NULL, NULL, + &fujitsubl_ops); + if (IS_ERR(fujitsu->bl_device)) + return PTR_ERR(fujitsu->bl_device); + + max_brightness = fujitsu->max_brightness; + + fujitsu->bl_device->props.max_brightness = max_brightness - 1; + fujitsu->bl_device->props.brightness = fujitsu->brightness_level; + + ret = platform_driver_register(&fujitsupf_driver); + if (ret) + goto fail_backlight; + + /* Register hotkey driver */ + + fujitsu_hotkey = kmalloc(sizeof(struct fujitsu_hotkey_t), GFP_KERNEL); + if (!fujitsu_hotkey) { + ret = -ENOMEM; + goto fail_hotkey; + } + memset(fujitsu_hotkey, 0, sizeof(struct fujitsu_hotkey_t)); + + result = acpi_bus_register_driver(&acpi_fujitsu_hotkey_driver); + if (result < 0) { + ret = -ENODEV; + goto fail_hotkey1; + } + printk(KERN_INFO "fujitsu-laptop: driver " FUJITSU_DRIVER_VERSION " successfully loaded.\n"); return 0; - fail_platform_device2: +fail_hotkey1: - platform_device_del(fujitsu->pf_device); - - fail_platform_device1: - - platform_device_put(fujitsu->pf_device); + kfree(fujitsu_hotkey); - fail_platform_driver: +fail_hotkey: platform_driver_unregister(&fujitsupf_driver); - fail_backlight: +fail_backlight: backlight_device_unregister(fujitsu->bl_device); - fail_acpi: +fail_platform_device2: + + platform_device_del(fujitsu->pf_device); + +fail_platform_device1: + + platform_device_put(fujitsu->pf_device); + +fail_platform_driver: + + acpi_bus_unregister_driver(&acpi_fujitsu_driver); + +fail_acpi: kfree(fujitsu); @@ -342,19 +1041,43 @@ static void __exit fujitsu_cleanup(void) kfree(fujitsu); + acpi_bus_unregister_driver(&acpi_fujitsu_hotkey_driver); + + kfree(fujitsu_hotkey); + printk(KERN_INFO "fujitsu-laptop: driver unloaded.\n"); } module_init(fujitsu_init); module_exit(fujitsu_cleanup); -MODULE_AUTHOR("Jonathan Woithe"); +module_param(use_alt_lcd_levels, uint, 0644); +MODULE_PARM_DESC(use_alt_lcd_levels, + "Use alternative interface for lcd_levels (needed for Lifebook s6410)."); +module_param(disable_brightness_keys, uint, 0644); +MODULE_PARM_DESC(disable_brightness_keys, + "Disable brightness keys (eg. if they are already handled by the generic ACPI_VIDEO device)."); +module_param(disable_brightness_adjust, uint, 0644); +MODULE_PARM_DESC(disable_brightness_adjust, "Disable brightness adjustment ."); +#ifdef CONFIG_FUJITSU_LAPTOP_DEBUG +module_param_named(debug, dbg_level, uint, 0644); +MODULE_PARM_DESC(debug, "Sets debug level bit-mask"); +#endif + +MODULE_AUTHOR("Jonathan Woithe, Peter Gruber"); MODULE_DESCRIPTION("Fujitsu laptop extras support"); MODULE_VERSION(FUJITSU_DRIVER_VERSION); MODULE_LICENSE("GPL"); +MODULE_ALIAS + ("dmi:*:svnFUJITSUSIEMENS:*:pvr:rvnFUJITSU:rnFJNB1D3:*:cvrS6410:*"); +MODULE_ALIAS + ("dmi:*:svnFUJITSU:*:pvr:rvnFUJITSU:rnFJNB19C:*:cvrS7020:*"); + static struct pnp_device_id pnp_ids[] = { { .id = "FUJ02bf" }, + { .id = "FUJ02B1" }, + { .id = "FUJ02E3" }, { .id = "" } }; MODULE_DEVICE_TABLE(pnp, pnp_ids); -- cgit v1.2.3 From 74523c901342a773ddd9f14c14539ec3d4197ecf Mon Sep 17 00:00:00 2001 From: Alok N Kataria Date: Fri, 13 Jun 2008 12:54:24 -0400 Subject: ACPI: fix checkpatch.pl complaints in scan.c http://bugzilla.kernel.org/show_bug.cgi?id=9772 Signed-off-by: Alok N Kataria Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/scan.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 9a84ed250d9f..5b049cd79553 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -6,7 +6,8 @@ #include #include #include -#include +#include +#include #include #include /* for acpi_ex_eisa_id_to_string() */ @@ -154,6 +155,7 @@ acpi_eject_store(struct device *d, struct device_attribute *attr, acpi_status status; acpi_object_type type = 0; struct acpi_device *acpi_device = to_acpi_device(d); + struct task_struct *task; if ((!count) || (buf[0] != '1')) { return -EINVAL; @@ -171,9 +173,11 @@ acpi_eject_store(struct device *d, struct device_attribute *attr, } /* remove the device in another thread to fix the deadlock issue */ - ret = kernel_thread(acpi_bus_hot_remove_device, - acpi_device->handle, SIGCHLD); - err: + task = kthread_run(acpi_bus_hot_remove_device, + acpi_device->handle, "acpi_hot_remove_device"); + if (IS_ERR(task)) + ret = PTR_ERR(task); +err: return ret; } -- cgit v1.2.3 From 6594d87ebd8371f4b67f7ab4b68f172b139b78d6 Mon Sep 17 00:00:00 2001 From: Yi Yang Date: Sat, 14 Jun 2008 00:52:06 -0400 Subject: ACPI: fix acpi fan state set error Under /proc/acpi, there is a fan control interface, a user can set 0 or 3 to /proc/acpi/fan/*/state, 0 denotes D0 state, 3 denotes D3 state, but in current implementation, a user can set a fan to D1 state by any char excluding '1', '2' and '3'. For example: [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "xxxxx" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on Obviously, such inputs as "" and "xxxxx" are invalid for fan state. This patch fixes this issue, it strictly limits fan state only to accept 0, 1, 2 and 3, any other inputs are invalid. Before applying this patch, the test result is: [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "xxxxx" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "3x" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: off [root@localhost acpi]# echo "-1x" > /proc/acpi/fan/C31B/state [root@localhost acpi]# cat /proc/acpi/fan/C31B/state status: on [root@localhost acpi]# After applying this patch, the test result is: [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "" > /proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "3" > /proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "xxxxx" > /proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "-1x" > /proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "0" > //proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: on [root@localhost ~]# echo "4" > //proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: on [root@localhost ~]# echo "3" > //proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: off [root@localhost ~]# echo "0" > //proc/acpi/fan/C31B/state [root@localhost ~]# cat /proc/acpi/fan/C31B/state status: on [root@localhost ~]# echo "3x" > //proc/acpi/fan/C31B/state -bash: echo: write error: Invalid argument [root@localhost ~]# Signed-off-by: Yi Yang Signed-off-by: Andi Kleen Acked-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/fan.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 6cf10cbc1eee..55c17afbe669 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -148,7 +148,7 @@ acpi_fan_write_state(struct file *file, const char __user * buffer, int result = 0; struct seq_file *m = file->private_data; struct acpi_device *device = m->private; - char state_string[12] = { '\0' }; + char state_string[3] = { '\0' }; if (count > sizeof(state_string) - 1) return -EINVAL; @@ -157,6 +157,12 @@ acpi_fan_write_state(struct file *file, const char __user * buffer, return -EFAULT; state_string[count] = '\0'; + if ((state_string[0] < '0') || (state_string[0] > '3')) + return -EINVAL; + if (state_string[1] == '\n') + state_string[1] = '\0'; + if (state_string[1] != '\0') + return -EINVAL; result = acpi_bus_set_power(device->handle, simple_strtoul(state_string, NULL, 0)); -- cgit v1.2.3 From 3d532d5e3882c1387a2722df2a368c4a9224b12f Mon Sep 17 00:00:00 2001 From: Yi Yang Date: Sat, 14 Jun 2008 00:54:37 -0400 Subject: ACPI: fix processor throttling set error http://bugzilla.kernel.org/show_bug.cgi?id=9704 When echo some invalid values to /proc/acpi/processor/*/throttling, there isn't any error info returned, on the contray, it sets throttling value to some T* successfully, obviously, this is incorrect, a correct way should be to let it fail and return error info. This patch fixed the aforementioned issue, it also enables /proc/acpi/processor/*/throttling to accept such values as 't0' and 'T0', it also strictly limits /proc/acpi/processor/*/throttling only to accept "*", "t*" and "T*", "*" is the throttling state value the processor can support, current, it is 0 - 7. Before applying this patch, the test result is below: [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "1xxxxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T1 state available: T0 to T7 states: T0: 100% *T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost acpi]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost acpi]# cd / [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "T100" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "2xxxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T2 state available: T0 to T7 states: T0: 100% T1: 87% *T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost /]# echo "7777" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost /]# echo "7xxx" > /proc/acpi/processor/CPU0/throttling [root@localhost /]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost /]# After applying this patch, the test result is below: [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "T0" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T0 state available: T0 to T7 states: *T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# vi drivers/acpi/processor_throttling.c [root@localhost linux-2.6.24-rc6]# echo "T8" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "t7" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo "t70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "7000" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "70" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo "xxx" > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo -n > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo $? 0 [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo -n "" > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# cat /proc/acpi/processor/CPU0/throttling state count: 8 active state: T7 state available: T0 to T7 states: T0: 100% T1: 87% T2: 75% T3: 62% T4: 50% T5: 37% T6: 25% *T7: 12% [root@localhost linux-2.6.24-rc6]# echo t0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo T0 > /proc/acpi/processor/CPU0/throttling [root@localhost linux-2.6.24-rc6]# echo Tt0 > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# echo T > /proc/acpi/processor/CPU0/throttling -bash: echo: write error: Invalid argument [root@localhost linux-2.6.24-rc6]# Signed-off-by: Yi Yang Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/processor_throttling.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 8728782aad3b..53345dbc5027 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -1232,7 +1232,10 @@ static ssize_t acpi_processor_write_throttling(struct file *file, int result = 0; struct seq_file *m = file->private_data; struct acpi_processor *pr = m->private; - char state_string[12] = { '\0' }; + char state_string[5] = ""; + char *charp = NULL; + size_t state_val = 0; + char tmpbuf[5] = ""; if (!pr || (count > sizeof(state_string) - 1)) return -EINVAL; @@ -1241,10 +1244,23 @@ static ssize_t acpi_processor_write_throttling(struct file *file, return -EFAULT; state_string[count] = '\0'; + if ((count > 0) && (state_string[count-1] == '\n')) + state_string[count-1] = '\0'; - result = acpi_processor_set_throttling(pr, - simple_strtoul(state_string, - NULL, 0)); + charp = state_string; + if ((state_string[0] == 't') || (state_string[0] == 'T')) + charp++; + + state_val = simple_strtoul(charp, NULL, 0); + if (state_val >= pr->throttling.state_count) + return -EINVAL; + + snprintf(tmpbuf, 5, "%d", state_val); + + if (strcmp(tmpbuf, charp) != 0) + return -EINVAL; + + result = acpi_processor_set_throttling(pr, state_val); if (result) return result; -- cgit v1.2.3 From 12b2b34e240a24bdbb2fdacf26a54b24ebf1ed81 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 17 Jun 2008 09:43:41 -0700 Subject: acpi: fix printk format warning Fix printk format warning: linux-next-20080617/drivers/acpi/processor_throttling.c:1258: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by: Randy Dunlap Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/processor_throttling.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 53345dbc5027..0622ace05220 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -1255,7 +1255,7 @@ static ssize_t acpi_processor_write_throttling(struct file *file, if (state_val >= pr->throttling.state_count) return -EINVAL; - snprintf(tmpbuf, 5, "%d", state_val); + snprintf(tmpbuf, 5, "%zu", state_val); if (strcmp(tmpbuf, charp) != 0) return -EINVAL; -- cgit v1.2.3 From 87dc5e3218ba3d7a9293f9113f58455747a233ac Mon Sep 17 00:00:00 2001 From: Cezary Jackiewicz Date: Thu, 12 Jun 2008 22:08:59 +0200 Subject: compal-laptop: remove unnecessary lcd_level attribute Signed-off-by: Cezary Jackiewicz Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/misc/compal-laptop.c | 37 ++----------------------------------- 1 file changed, 2 insertions(+), 35 deletions(-) diff --git a/drivers/misc/compal-laptop.c b/drivers/misc/compal-laptop.c index 0c1f5875fbb9..344b790a6253 100644 --- a/drivers/misc/compal-laptop.c +++ b/drivers/misc/compal-laptop.c @@ -28,9 +28,6 @@ * * This driver exports a few files in /sys/devices/platform/compal-laptop/: * - * lcd_level - Screen brightness: contains a single integer in the - * range 0..7. (rw) - * * wlan - wlan subsystem state: contains 0 or 1 (rw) * * bluetooth - Bluetooth subsystem state: contains 0 or 1 (rw) @@ -44,7 +41,7 @@ * This driver might work on other laptops produced by Compal. If you * want to try it you can pass force=1 as argument to the module which * will force it to load even when the DMI data doesn't identify the - * laptop as IFL90. + * laptop as FL9x. */ #include @@ -56,7 +53,7 @@ #include #include -#define COMPAL_DRIVER_VERSION "0.2.5" +#define COMPAL_DRIVER_VERSION "0.2.6" #define COMPAL_LCD_LEVEL_MAX 8 @@ -209,34 +206,6 @@ static ssize_t show_bluetooth(struct device *dev, return sprintf(buf, "%i\n", enabled); } -static ssize_t show_lcd_level(struct device *dev, - struct device_attribute *attr, char *buf) -{ - int ret; - - ret = get_lcd_level(); - if (ret < 0) - return ret; - - return sprintf(buf, "%i\n", ret); -} - -static ssize_t store_lcd_level(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - int level, ret; - - if (sscanf(buf, "%i", &level) != 1 || - (level < 0 || level >= COMPAL_LCD_LEVEL_MAX)) - return -EINVAL; - - ret = set_lcd_level(level); - if (ret < 0) - return ret; - - return count; -} - static ssize_t store_wlan_state(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { @@ -267,13 +236,11 @@ static ssize_t store_bluetooth_state(struct device *dev, return count; } -static DEVICE_ATTR(lcd_level, 0644, show_lcd_level, store_lcd_level); static DEVICE_ATTR(bluetooth, 0644, show_bluetooth, store_bluetooth_state); static DEVICE_ATTR(wlan, 0644, show_wlan, store_wlan_state); static DEVICE_ATTR(raw, 0444, show_raw, NULL); static struct attribute *compal_attributes[] = { - &dev_attr_lcd_level.attr, &dev_attr_bluetooth.attr, &dev_attr_wlan.attr, &dev_attr_raw.attr, -- cgit v1.2.3 From e38e8a0743b0e996a8a3fbea8908fe75a84f02c7 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 13 Jun 2008 08:28:55 +0800 Subject: Make GPE disable more robust Implemented another change for the GPE disable. We now perform a read-change-write of the enable register instead of simply writing out the cached enable mask. This will prevent inadvertent enabling of GPEs if a rogue GPE is received during initialization (before GPE handlers are installed.) http://bugzilla.kernel.org/show_bug.cgi?id=6217 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/events/evgpe.c | 18 ++++++++++++---- drivers/acpi/hardware/hwgpe.c | 50 ++++++++++++++++++++++++++++++++++++++++++- include/acpi/achware.h | 2 ++ 3 files changed, 65 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c index 5354be44f876..e0339d4139a4 100644 --- a/drivers/acpi/events/evgpe.c +++ b/drivers/acpi/events/evgpe.c @@ -256,7 +256,7 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) return_ACPI_STATUS(status); } - /* Mark wake-disabled or HW disable, or both */ + /* Clear the appropriate enabled flags for this GPE */ switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) { case ACPI_GPE_TYPE_WAKE: @@ -273,13 +273,23 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) /* Disable the requested runtime GPE */ ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_RUN_ENABLED); - - /* fallthrough */ + break; default: - acpi_hw_write_gpe_enable_reg(gpe_event_info); + break; } + /* + * Even if we don't know the GPE type, make sure that we always + * disable it. low_disable_gpe will just clear the enable bit for this + * GPE and write it. It will not write out the current GPE enable mask, + * since this may inadvertently enable GPEs too early, if a rogue GPE has + * come in during ACPICA initialization - possibly as a result of AML or + * other code that has enabled the GPE. + */ + status = acpi_hw_low_disable_gpe(gpe_event_info); + return_ACPI_STATUS(status); + return_ACPI_STATUS(AE_OK); } diff --git a/drivers/acpi/hardware/hwgpe.c b/drivers/acpi/hardware/hwgpe.c index 14bc4f456ae8..58347d6c43f8 100644 --- a/drivers/acpi/hardware/hwgpe.c +++ b/drivers/acpi/hardware/hwgpe.c @@ -53,6 +53,54 @@ static acpi_status acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, struct acpi_gpe_block_info *gpe_block); +/****************************************************************************** + * + * FUNCTION: acpi_hw_low_disable_gpe + * + * PARAMETERS: gpe_event_info - Info block for the GPE to be disabled + * + * RETURN: Status + * + * DESCRIPTION: Disable a single GPE in the enable register. + * + ******************************************************************************/ + +acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) +{ + struct acpi_gpe_register_info *gpe_register_info; + acpi_status status; + u32 enable_mask; + + /* Get the info block for the entire GPE register */ + + gpe_register_info = gpe_event_info->register_info; + if (!gpe_register_info) { + return (AE_NOT_EXIST); + } + + /* Get current value of the enable register that contains this GPE */ + + status = acpi_hw_low_level_read(ACPI_GPE_REGISTER_WIDTH, &enable_mask, + &gpe_register_info->enable_address); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Clear just the bit that corresponds to this GPE */ + + ACPI_CLEAR_BIT(enable_mask, + ((u32) 1 << + (gpe_event_info->gpe_number - + gpe_register_info->base_gpe_number))); + + /* Write the updated enable mask */ + + status = acpi_hw_low_level_write(ACPI_GPE_REGISTER_WIDTH, enable_mask, + &gpe_register_info->enable_address); + + return (status); +} + /****************************************************************************** * * FUNCTION: acpi_hw_write_gpe_enable_reg @@ -68,7 +116,7 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, ******************************************************************************/ acpi_status -acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info) +acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info) { struct acpi_gpe_register_info *gpe_register_info; acpi_status status; diff --git a/include/acpi/achware.h b/include/acpi/achware.h index d4fb9bbc903c..45e985961f4c 100644 --- a/include/acpi/achware.h +++ b/include/acpi/achware.h @@ -87,6 +87,8 @@ acpi_status acpi_hw_clear_acpi_status(void); /* * hwgpe - GPE support */ +acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); + acpi_status acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info); -- cgit v1.2.3 From 47c00d2bc2ef2cf8a608688144fe2093a2aa9507 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 20 Jun 2008 13:56:56 +0200 Subject: ACPICA: fix mutex names in debug code. Reorder the mutex names to match the preceding #defines Signed-off-by: Vegard Nossum Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- include/acpi/aclocal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h index c5cdc32ac2f8..62d7468ed3f9 100644 --- a/include/acpi/aclocal.h +++ b/include/acpi/aclocal.h @@ -98,8 +98,8 @@ union acpi_parse_object; static char *acpi_gbl_mutex_names[ACPI_NUM_MUTEX] = { "ACPI_MTX_Interpreter", - "ACPI_MTX_Tables", "ACPI_MTX_Namespace", + "ACPI_MTX_Tables", "ACPI_MTX_Events", "ACPI_MTX_Caches", "ACPI_MTX_Memory", -- cgit v1.2.3 From 141094612d2606395a7b9e8658d10ef5c487cf97 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 25 Jun 2008 19:25:47 +0300 Subject: eeepc-laptop: static make the needlessly global cm_{g,s}etv[] static. Signed-off-by: Adrian Bunk Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/misc/eeepc-laptop.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c index 6d727609097f..9e8d79e7e9f4 100644 --- a/drivers/misc/eeepc-laptop.c +++ b/drivers/misc/eeepc-laptop.c @@ -87,7 +87,7 @@ enum { CM_ASL_LID }; -const char *cm_getv[] = { +static const char *cm_getv[] = { "WLDG", NULL, NULL, NULL, "CAMG", NULL, NULL, NULL, NULL, "PBLG", NULL, NULL, @@ -96,7 +96,7 @@ const char *cm_getv[] = { "CRDG", "LIDG" }; -const char *cm_setv[] = { +static const char *cm_setv[] = { "WLDS", NULL, NULL, NULL, "CAMS", NULL, NULL, NULL, "SDSP", "PBLS", "HDPS", NULL, -- cgit v1.2.3 From a0bbaf83311cd995136c9047f174d79c1075ee2d Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sat, 21 Jun 2008 09:09:08 +0100 Subject: acer-wmi: Remove LED colour comment from documentation This should have been removed when the colour was removed from the LED device name. Signed-off-by: Carlos Corbacho Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- Documentation/laptops/acer-wmi.txt | 2 -- 1 file changed, 2 deletions(-) diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt index 79b7dbd22141..69b5dd4e5a59 100644 --- a/Documentation/laptops/acer-wmi.txt +++ b/Documentation/laptops/acer-wmi.txt @@ -174,8 +174,6 @@ The LED is exposed through the LED subsystem, and can be found in: The mail LED is autodetected, so if you don't have one, the LED device won't be registered. -If you have a mail LED that is not green, please report this to me. - Backlight ********* -- cgit v1.2.3 From 9991d9f2bc75dc8735932240b67432d4073b8f60 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sat, 21 Jun 2008 09:09:22 +0100 Subject: acer-wmi: Blacklist backlight on Acer Aspire 1520 & 1360 series A newer BIOS for these laptops adds ACPI-WMI support to them. However, it does not add support for the backlight via the EC, and we have no way to detect this on older machines, so blacklist it from them. Signed-off-by: Carlos Corbacho Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/misc/acer-wmi.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index dd13a3749927..b82ff25a7b54 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -174,7 +174,7 @@ static struct wmi_interface *interface; struct quirk_entry { u8 wireless; u8 mailled; - u8 brightness; + s8 brightness; u8 bluetooth; }; @@ -198,6 +198,10 @@ static int dmi_matched(const struct dmi_system_id *dmi) static struct quirk_entry quirk_unknown = { }; +static struct quirk_entry quirk_acer_aspire_1520 = { + .brightness = -1, +}; + static struct quirk_entry quirk_acer_travelmate_2490 = { .mailled = 1, }; @@ -208,6 +212,24 @@ static struct quirk_entry quirk_medion_md_98300 = { }; static struct dmi_system_id acer_quirks[] = { + { + .callback = dmi_matched, + .ident = "Acer Aspire 1360", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1360"), + }, + .driver_data = &quirk_acer_aspire_1520, + }, + { + .callback = dmi_matched, + .ident = "Acer Aspire 1520", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1520"), + }, + .driver_data = &quirk_acer_aspire_1520, + }, { .callback = dmi_matched, .ident = "Acer Aspire 3100", @@ -552,7 +574,8 @@ static acpi_status AMW0_set_capabilities(void) * appear to use the same EC register for brightness, even if they * differ for wireless, etc */ - interface->capability |= ACER_CAP_BRIGHTNESS; + if (quirks->brightness >= 0) + interface->capability |= ACER_CAP_BRIGHTNESS; return AE_OK; } @@ -1059,6 +1082,8 @@ static int __init acer_wmi_init(void) printk(ACER_INFO "Acer Laptop ACPI-WMI Extras version %s\n", ACER_WMI_VERSION); + find_quirks(); + /* * Detect which ACPI-WMI interface we're using. */ @@ -1092,8 +1117,6 @@ static int __init acer_wmi_init(void) if (wmi_has_guid(AMW0_GUID1)) AMW0_find_mailled(); - find_quirks(); - if (!interface) { printk(ACER_ERR "No or unsupported WMI interface, unable to " "load\n"); -- cgit v1.2.3 From f2b585b4a31731b17b9769eae523986fa7fddcde Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sat, 21 Jun 2008 09:09:27 +0100 Subject: acer-wmi: Respect framebuffer blanking in backlight If the framebuffer has requested blanking, turn the backlight down. Also offer the user the option to do this. Reported-by: Michal Pecio Signed-off-by: Carlos Corbacho Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/misc/acer-wmi.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index b82ff25a7b54..e35825f7e7ba 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -830,7 +831,15 @@ static int read_brightness(struct backlight_device *bd) static int update_bl_status(struct backlight_device *bd) { - set_u32(bd->props.brightness, ACER_CAP_BRIGHTNESS); + int intensity = bd->props.brightness; + + if (bd->props.power != FB_BLANK_UNBLANK) + intensity = 0; + if (bd->props.fb_blank != FB_BLANK_UNBLANK) + intensity = 0; + + set_u32(intensity, ACER_CAP_BRIGHTNESS); + return 0; } @@ -852,8 +861,9 @@ static int __devinit acer_backlight_init(struct device *dev) acer_backlight_device = bd; + bd->props.power = FB_BLANK_UNBLANK; + bd->props.brightness = max_brightness; bd->props.max_brightness = max_brightness; - bd->props.brightness = read_brightness(NULL); backlight_update_status(bd); return 0; } -- cgit v1.2.3 From 6f061ab5e55d7fe6ce0c36e8954f56f0d95348fb Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sat, 21 Jun 2008 09:09:38 +0100 Subject: acer-wmi: Add EC quirk for Fujitsu Siemens Amilo Li 1718 This laptop needs a different EC quirk from the standard Acer one to read the wireless status. Signed-off-by: Carlos Corbacho Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/misc/acer-wmi.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index e35825f7e7ba..5b7c5fcd5af7 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -212,6 +212,10 @@ static struct quirk_entry quirk_medion_md_98300 = { .wireless = 1, }; +static struct quirk_entry quirk_fujitsu_amilo_li_1718 = { + .wireless = 2, +}; + static struct dmi_system_id acer_quirks[] = { { .callback = dmi_matched, @@ -321,6 +325,15 @@ static struct dmi_system_id acer_quirks[] = { }, .driver_data = &quirk_acer_travelmate_2490, }, + { + .callback = dmi_matched, + .ident = "Fujitsu Siemens Amilo Li 1718", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Li 1718"), + }, + .driver_data = &quirk_fujitsu_amilo_li_1718, + }, { .callback = dmi_matched, .ident = "Medion MD 98300", @@ -416,6 +429,12 @@ struct wmi_interface *iface) return AE_ERROR; *value = result & 0x1; return AE_OK; + case 2: + err = ec_read(0x71, &result); + if (err) + return AE_ERROR; + *value = result & 0x1; + return AE_OK; default: err = ec_read(0xA, &result); if (err) -- cgit v1.2.3 From 5753dd539a86d8fc40a25e1a2cd1005a6525f083 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sat, 21 Jun 2008 09:09:48 +0100 Subject: acer-wmi: Disable device autodetection on Fujitsu Siemens Amilo Li2732 The AMW0 (V1) device detection method doesn't work properly on this laptop, so disable it, and for other laptops that may have this problem, by switching on a strange GUID. Signed-off-by: Carlos Corbacho Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/misc/acer-wmi.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index 5b7c5fcd5af7..dd0b8d8b5bd9 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -88,6 +88,7 @@ struct acer_quirks { * Acer ACPI method GUIDs */ #define AMW0_GUID1 "67C3371D-95A3-4C37-BB61-DD47B491DAAB" +#define AMW0_GUID2 "431F16ED-0C2B-444C-B267-27DEB140CF9C" #define WMID_GUID1 "6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3" #define WMID_GUID2 "95764E09-FB56-4e83-B31A-37761F60994A" @@ -548,6 +549,15 @@ static acpi_status AMW0_set_capabilities(void) struct acpi_buffer out = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *obj; + /* + * On laptops with this strange GUID (non Acer), normal probing doesn't + * work. + */ + if (wmi_has_guid(AMW0_GUID2)) { + interface->capability |= ACER_CAP_WIRELESS; + return AE_OK; + } + args.eax = ACER_AMW0_WRITE; args.ecx = args.edx = 0; -- cgit v1.2.3 From 81143522aa823036c4aa35bdd3b2e41966cf6e15 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sat, 21 Jun 2008 09:09:53 +0100 Subject: acer-wmi: Add debugfs file for device detection Add a debugfs file for showing the full results of the method we use to detect devices on WMID laptops. This should be useful in the case that a Linux user gets an Acer laptop with 3G support (and/ or people who enjoy ripping their wireless cards out) so we can get some feedback on how this value changes in these cases. (At the moment, we always enable the wireless and 3G control. In the case of the former, this is fairly safe. In the case of the latter though, trying to toggle this device if it doesn't exist on a laptop causes ACPI warnings/ errors). To summarise: If you have an Acer laptop with a built in 3G card, please report back the value from this file. Signed-off-by: Carlos Corbacho Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/misc/acer-wmi.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index dd0b8d8b5bd9..d8b8574e303c 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -35,6 +35,7 @@ #include #include #include +#include #include @@ -152,6 +153,12 @@ struct acer_data { int brightness; }; +struct acer_debug { + struct dentry *root; + struct dentry *devices; + u32 wmid_devices; +}; + /* Each low-level interface must define at least some of the following */ struct wmi_interface { /* The WMI device type */ @@ -162,6 +169,9 @@ struct wmi_interface { /* Private data for the current interface */ struct acer_data data; + + /* debugfs entries associated with this interface */ + struct acer_debug debug; }; /* The static interface pointer, points to the currently detected interface */ @@ -955,6 +965,28 @@ static ssize_t show_interface(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(interface, S_IWUGO | S_IRUGO | S_IWUSR, show_interface, NULL); +/* + * debugfs functions + */ +static u32 get_wmid_devices(void) +{ + struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object *obj; + acpi_status status; + + status = wmi_query_block(WMID_GUID2, 1, &out); + if (ACPI_FAILURE(status)) + return 0; + + obj = (union acpi_object *) out.pointer; + if (obj && obj->type == ACPI_TYPE_BUFFER && + obj->buffer.length == sizeof(u32)) { + return *((u32 *) obj->buffer.pointer); + } else { + return 0; + } +} + /* * Platform device */ @@ -1114,6 +1146,33 @@ error_sysfs: return retval; } +static void remove_debugfs(void) +{ + debugfs_remove(interface->debug.devices); + debugfs_remove(interface->debug.root); +} + +static int create_debugfs(void) +{ + interface->debug.root = debugfs_create_dir("acer-wmi", NULL); + if (!interface->debug.root) { + printk(ACER_ERR "Failed to create debugfs directory"); + return -ENOMEM; + } + + interface->debug.devices = debugfs_create_u32("devices", S_IRUGO, + interface->debug.root, + &interface->debug.wmid_devices); + if (!interface->debug.devices) + goto error_debugfs; + + return 0; + +error_debugfs: + remove_debugfs(); + return -ENOMEM; +} + static int __init acer_wmi_init(void) { int err; @@ -1173,6 +1232,13 @@ static int __init acer_wmi_init(void) if (err) return err; + if (wmi_has_guid(WMID_GUID2)) { + interface->debug.wmid_devices = get_wmid_devices(); + err = create_debugfs(); + if (err) + return err; + } + /* Override any initial settings with values from the commandline */ acer_commandline_init(); -- cgit v1.2.3 From 860f0c6b3dcaa455894f690647442dc97cab19c8 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Sat, 21 Jun 2008 09:09:58 +0100 Subject: acer-wmi: Remove version number It doesn't make much sense these days. Signed-off-by: Carlos Corbacho Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/misc/acer-wmi.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index d8b8574e303c..e7a3fe508dff 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -22,8 +22,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define ACER_WMI_VERSION "0.1" - #include #include #include @@ -1177,8 +1175,7 @@ static int __init acer_wmi_init(void) { int err; - printk(ACER_INFO "Acer Laptop ACPI-WMI Extras version %s\n", - ACER_WMI_VERSION); + printk(ACER_INFO "Acer Laptop ACPI-WMI Extras\n"); find_quirks(); -- cgit v1.2.3 From d1857056904d5f313f11184fcfa624652ff9620a Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 20 Jun 2008 15:39:09 +0200 Subject: ACPI: don't walk tables if ACPI was disabled Ingo Molnar wrote: > -tip auto-testing started triggering this spinlock corruption message > yesterday: > > [ 3.976213] calling acpi_rtc_init+0x0/0xd3 > [ 3.980213] ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread F7C50000 could not acquire Mutex [3] [20080321] > [ 3.992213] BUG: spinlock bad magic on CPU#0, swapper/1 > [ 3.992213] lock: c2508dc4, .magic: 00000000, .owner: swapper/1, .owner_cpu: 0 This is apparently because some parts of ACPI, including mutexes, are not initialized when acpi=off is passed to the kernel. Reported-by: Ingo Molnar Signed-off-by: Vegard Nossum Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/glue.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 9b227d4dc9c9..6d18ca34b6aa 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -333,6 +333,9 @@ static int __init acpi_rtc_init(void) { struct device *dev = get_rtc_dev(); + if (acpi_disabled) + return 0; + if (acpi_disabled) return 0; -- cgit v1.2.3 From cc7e51666d82aedfd6b9a033ca1a10d71c21f1ca Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 24 Jun 2008 22:57:12 -0400 Subject: dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled. Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/bay.c | 3 +++ drivers/acpi/dock.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c index 61b6c5beb2d3..e6caf5d42e0e 100644 --- a/drivers/acpi/bay.c +++ b/drivers/acpi/bay.c @@ -377,6 +377,9 @@ static int __init bay_init(void) INIT_LIST_HEAD(&drive_bays); + if (acpi_disabled) + return -ENODEV; + if (acpi_disabled) return -ENODEV; diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index bb7c51f712bd..1e872e79db33 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -917,6 +917,9 @@ static int __init dock_init(void) dock_station = NULL; + if (acpi_disabled) + return 0; + if (acpi_disabled) return 0; -- cgit v1.2.3 From 2fe2de5f6c283a7d2a82c1b99a19012079cee555 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 5 Jun 2008 01:15:40 +0200 Subject: ACPI PM: acpi_pm_device_sleep_state() cleanup Get rid of a superfluous acpi_pm_device_sleep_state() parameter. The only legitimate value of that parameter must be derived from the first parameter, which is what all the callers already do. (However, this does not address the fact that ACPI still doesn't set up those flags.) Signed-off-by: David Brownell Signed-off-by: Andi Kleen Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/sleep/main.c | 8 ++++---- drivers/pci/pci-acpi.c | 3 +-- drivers/pnp/pnpacpi/core.c | 4 +--- include/acpi/acpi_bus.h | 4 ++-- 4 files changed, 8 insertions(+), 11 deletions(-) diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 495c63a3e0af..b45806d77288 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -368,8 +368,8 @@ int acpi_suspend(u32 acpi_state) /** * acpi_pm_device_sleep_state - return preferred power state of ACPI device * in the system sleep state given by %acpi_target_sleep_state - * @dev: device to examine - * @wake: if set, the device should be able to wake up the system + * @dev: device to examine; its driver model wakeup flags control + * whether it should be able to wake up the system * @d_min_p: used to store the upper limit of allowed states range * Return value: preferred power state of the device on success, -ENODEV on * failure (ie. if there's no 'struct acpi_device' for @dev) @@ -387,7 +387,7 @@ int acpi_suspend(u32 acpi_state) * via @wake. */ -int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p) +int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) { acpi_handle handle = DEVICE_ACPI_HANDLE(dev); struct acpi_device *adev; @@ -426,7 +426,7 @@ int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p) * can wake the system. _S0W may be valid, too. */ if (acpi_target_sleep_state == ACPI_STATE_S0 || - (wake && adev->wakeup.state.enabled && + (device_may_wakeup(dev) && adev->wakeup.state.enabled && adev->wakeup.sleep_state <= acpi_target_sleep_state)) { acpi_status status; diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 9d6fc8e6285d..caabf0573c3d 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -298,8 +298,7 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev, { int acpi_state; - acpi_state = acpi_pm_device_sleep_state(&pdev->dev, - device_may_wakeup(&pdev->dev), NULL); + acpi_state = acpi_pm_device_sleep_state(&pdev->dev, NULL); if (acpi_state < 0) return PCI_POWER_ERROR; diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index 50902773beaf..c1b9ea34977b 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -117,9 +117,7 @@ static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state) { int power_state; - power_state = acpi_pm_device_sleep_state(&dev->dev, - device_may_wakeup(&dev->dev), - NULL); + power_state = acpi_pm_device_sleep_state(&dev->dev, NULL); if (power_state < 0) power_state = (state.event == PM_EVENT_ON) ? ACPI_STATE_D0 : ACPI_STATE_D3; diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 2f1c68c7a727..db90a74f8714 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -376,9 +376,9 @@ acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int); #define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle)) #ifdef CONFIG_PM_SLEEP -int acpi_pm_device_sleep_state(struct device *, int, int *); +int acpi_pm_device_sleep_state(struct device *, int *); #else /* !CONFIG_PM_SLEEP */ -static inline int acpi_pm_device_sleep_state(struct device *d, int w, int *p) +static inline int acpi_pm_device_sleep_state(struct device *d, int *p) { if (p) *p = ACPI_STATE_D0; -- cgit v1.2.3 From a80a6da145bab8ee77af304961fc926de7a8ac84 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 5 Jun 2008 01:16:37 +0200 Subject: PCI ACPI: Drop the second argument of platform_pci_choose_state Since the second argument of acpi_pci_choose_state() and platform_pci_choose_state() is never used, remove it. Signed-off-by: Rafael J. Wysocki Signed-off-by: Andi Kleen Acked-by: Pavel Machek Signed-off-by: Len Brown --- drivers/pci/pci-acpi.c | 3 +-- drivers/pci/pci.c | 4 ++-- drivers/pci/pci.h | 3 +-- 3 files changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index caabf0573c3d..dab9d471914c 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -293,8 +293,7 @@ EXPORT_SYMBOL(pci_osc_control_set); * choose highest power _SxD or any lower power */ -static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev, - pm_message_t state) +static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) { int acpi_state; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e4548ab2a93c..75c60239cadd 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -508,7 +508,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) return 0; } -pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state); +pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev); /** * pci_choose_state - Choose the power state of a PCI device @@ -528,7 +528,7 @@ pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) return PCI_D0; if (platform_pci_choose_state) { - ret = platform_pci_choose_state(dev, state); + ret = platform_pci_choose_state(dev); if (ret != PCI_POWER_ERROR) return ret; } diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 00408c97e5fc..312daff834b6 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -6,8 +6,7 @@ extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev); extern void pci_cleanup_rom(struct pci_dev *dev); /* Firmware callbacks */ -extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, - pm_message_t state); +extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev); extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state); -- cgit v1.2.3 From 741438b5008791327d2183cebcd7ac9cfad64ec6 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 5 Jun 2008 01:17:28 +0200 Subject: ACPI PM: Remove obsolete Toshiba workaround Remove the obsolete workaround for a Toshiba Satellite 4030cdt S1 problem from drivers/acpi/sleep/main.c . Signed-off-by: Rafael J. Wysocki Signed-off-by: Andi Kleen Acked-by: Pavel Machek Signed-off-by: Len Brown --- drivers/acpi/sleep/main.c | 31 ------------------------------- 1 file changed, 31 deletions(-) diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index b45806d77288..244e352f7661 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -61,8 +61,6 @@ static u32 acpi_suspend_states[] = { [PM_SUSPEND_MAX] = ACPI_STATE_S5 }; -static int init_8259A_after_S1; - /** * acpi_suspend_begin - Set the target system sleep state to the state * associated with given @pm_state, if supported. @@ -185,13 +183,6 @@ static void acpi_suspend_finish(void) acpi_set_firmware_waking_vector((acpi_physical_address) 0); acpi_target_sleep_state = ACPI_STATE_S0; - -#ifdef CONFIG_X86 - if (init_8259A_after_S1) { - printk("Broken toshiba laptop -> kicking interrupts\n"); - init_8259A(0); - } -#endif } /** @@ -231,26 +222,6 @@ static struct platform_suspend_ops acpi_suspend_ops = { .finish = acpi_suspend_finish, .end = acpi_suspend_end, }; - -/* - * Toshiba fails to preserve interrupts over S1, reinitialization - * of 8259 is needed after S1 resume. - */ -static int __init init_ints_after_s1(const struct dmi_system_id *d) -{ - printk(KERN_WARNING "%s with broken S1 detected.\n", d->ident); - init_8259A_after_S1 = 1; - return 0; -} - -static struct dmi_system_id __initdata acpisleep_dmi_table[] = { - { - .callback = init_ints_after_s1, - .ident = "Toshiba Satellite 4030cdt", - .matches = {DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),}, - }, - {}, -}; #endif /* CONFIG_SUSPEND */ #ifdef CONFIG_HIBERNATION @@ -472,8 +443,6 @@ int __init acpi_sleep_init(void) u8 type_a, type_b; #ifdef CONFIG_SUSPEND int i = 0; - - dmi_check_system(acpisleep_dmi_table); #endif if (acpi_disabled) -- cgit v1.2.3 From d20a4dca47d2cd027ed58a13f91b424affd1f449 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 11 Jun 2008 22:03:10 +0200 Subject: APM emulation: Notify about all suspend events, not just APM invoked ones (v2) This revamps the apm-emulation code to get suspend notifications regardless of what way pm_suspend() was invoked, whether via the apm ioctl or via /sys/power/state. Also do some code cleanup and add comments while at it. Signed-off-by: Johannes Berg Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/char/apm-emulation.c | 346 ++++++++++++++++++++++++++----------------- 1 file changed, 207 insertions(+), 139 deletions(-) diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c index da8a1658a273..aaca40283be9 100644 --- a/drivers/char/apm-emulation.c +++ b/drivers/char/apm-emulation.c @@ -58,6 +58,55 @@ struct apm_queue { apm_event_t events[APM_MAX_EVENTS]; }; +/* + * thread states (for threads using a writable /dev/apm_bios fd): + * + * SUSPEND_NONE: nothing happening + * SUSPEND_PENDING: suspend event queued for thread and pending to be read + * SUSPEND_READ: suspend event read, pending acknowledgement + * SUSPEND_ACKED: acknowledgement received from thread (via ioctl), + * waiting for resume + * SUSPEND_ACKTO: acknowledgement timeout + * SUSPEND_DONE: thread had acked suspend and is now notified of + * resume + * + * SUSPEND_WAIT: this thread invoked suspend and is waiting for resume + * + * A thread migrates in one of three paths: + * NONE -1-> PENDING -2-> READ -3-> ACKED -4-> DONE -5-> NONE + * -6-> ACKTO -7-> NONE + * NONE -8-> WAIT -9-> NONE + * + * While in PENDING or READ, the thread is accounted for in the + * suspend_acks_pending counter. + * + * The transitions are invoked as follows: + * 1: suspend event is signalled from the core PM code + * 2: the suspend event is read from the fd by the userspace thread + * 3: userspace thread issues the APM_IOC_SUSPEND ioctl (as ack) + * 4: core PM code signals that we have resumed + * 5: APM_IOC_SUSPEND ioctl returns + * + * 6: the notifier invoked from the core PM code timed out waiting + * for all relevant threds to enter ACKED state and puts those + * that haven't into ACKTO + * 7: those threads issue APM_IOC_SUSPEND ioctl too late, + * get an error + * + * 8: userspace thread issues the APM_IOC_SUSPEND ioctl (to suspend), + * ioctl code invokes pm_suspend() + * 9: pm_suspend() returns indicating resume + */ +enum apm_suspend_state { + SUSPEND_NONE, + SUSPEND_PENDING, + SUSPEND_READ, + SUSPEND_ACKED, + SUSPEND_ACKTO, + SUSPEND_WAIT, + SUSPEND_DONE, +}; + /* * The per-file APM data */ @@ -69,13 +118,7 @@ struct apm_user { unsigned int reader: 1; int suspend_result; - unsigned int suspend_state; -#define SUSPEND_NONE 0 /* no suspend pending */ -#define SUSPEND_PENDING 1 /* suspend pending read */ -#define SUSPEND_READ 2 /* suspend read, pending ack */ -#define SUSPEND_ACKED 3 /* suspend acked */ -#define SUSPEND_WAIT 4 /* waiting for suspend */ -#define SUSPEND_DONE 5 /* suspend completed */ + enum apm_suspend_state suspend_state; struct apm_queue queue; }; @@ -83,7 +126,8 @@ struct apm_user { /* * Local variables */ -static int suspends_pending; +static atomic_t suspend_acks_pending = ATOMIC_INIT(0); +static atomic_t userspace_notification_inhibit = ATOMIC_INIT(0); static int apm_disabled; static struct task_struct *kapmd_tsk; @@ -166,78 +210,6 @@ static void queue_event(apm_event_t event) wake_up_interruptible(&apm_waitqueue); } -/* - * queue_suspend_event - queue an APM suspend event. - * - * Check that we're in a state where we can suspend. If not, - * return -EBUSY. Otherwise, queue an event to all "writer" - * users. If there are no "writer" users, return '1' to - * indicate that we can immediately suspend. - */ -static int queue_suspend_event(apm_event_t event, struct apm_user *sender) -{ - struct apm_user *as; - int ret = 1; - - mutex_lock(&state_lock); - down_read(&user_list_lock); - - /* - * If a thread is still processing, we can't suspend, so reject - * the request. - */ - list_for_each_entry(as, &apm_user_list, list) { - if (as != sender && as->reader && as->writer && as->suser && - as->suspend_state != SUSPEND_NONE) { - ret = -EBUSY; - goto out; - } - } - - list_for_each_entry(as, &apm_user_list, list) { - if (as != sender && as->reader && as->writer && as->suser) { - as->suspend_state = SUSPEND_PENDING; - suspends_pending++; - queue_add_event(&as->queue, event); - ret = 0; - } - } - out: - up_read(&user_list_lock); - mutex_unlock(&state_lock); - wake_up_interruptible(&apm_waitqueue); - return ret; -} - -static void apm_suspend(void) -{ - struct apm_user *as; - int err = pm_suspend(PM_SUSPEND_MEM); - - /* - * Anyone on the APM queues will think we're still suspended. - * Send a message so everyone knows we're now awake again. - */ - queue_event(APM_NORMAL_RESUME); - - /* - * Finally, wake up anyone who is sleeping on the suspend. - */ - mutex_lock(&state_lock); - down_read(&user_list_lock); - list_for_each_entry(as, &apm_user_list, list) { - if (as->suspend_state == SUSPEND_WAIT || - as->suspend_state == SUSPEND_ACKED) { - as->suspend_result = err; - as->suspend_state = SUSPEND_DONE; - } - } - up_read(&user_list_lock); - mutex_unlock(&state_lock); - - wake_up(&apm_suspend_waitqueue); -} - static ssize_t apm_read(struct file *fp, char __user *buf, size_t count, loff_t *ppos) { struct apm_user *as = fp->private_data; @@ -308,25 +280,22 @@ apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg) as->suspend_result = -EINTR; - if (as->suspend_state == SUSPEND_READ) { - int pending; - + switch (as->suspend_state) { + case SUSPEND_READ: /* * If we read a suspend command from /dev/apm_bios, * then the corresponding APM_IOC_SUSPEND ioctl is * interpreted as an acknowledge. */ as->suspend_state = SUSPEND_ACKED; - suspends_pending--; - pending = suspends_pending == 0; + atomic_dec(&suspend_acks_pending); mutex_unlock(&state_lock); /* - * If there are no further acknowledges required, - * suspend the system. + * suspend_acks_pending changed, the notifier needs to + * be woken up for this */ - if (pending) - apm_suspend(); + wake_up(&apm_suspend_waitqueue); /* * Wait for the suspend/resume to complete. If there @@ -342,35 +311,21 @@ apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg) * try_to_freeze() in freezer_count() will not trigger */ freezer_count(); - } else { + break; + case SUSPEND_ACKTO: + as->suspend_result = -ETIMEDOUT; + mutex_unlock(&state_lock); + break; + default: as->suspend_state = SUSPEND_WAIT; mutex_unlock(&state_lock); /* * Otherwise it is a request to suspend the system. - * Queue an event for all readers, and expect an - * acknowledge from all writers who haven't already - * acknowledged. - */ - err = queue_suspend_event(APM_USER_SUSPEND, as); - if (err < 0) { - /* - * Avoid taking the lock here - this - * should be fine. - */ - as->suspend_state = SUSPEND_NONE; - break; - } - - if (err > 0) - apm_suspend(); - - /* - * Wait for the suspend/resume to complete. If there - * are pending acknowledges, we wait here for them. + * Just invoke pm_suspend(), we'll handle it from + * there via the notifier. */ - wait_event_freezable(apm_suspend_waitqueue, - as->suspend_state == SUSPEND_DONE); + as->suspend_result = pm_suspend(PM_SUSPEND_MEM); } mutex_lock(&state_lock); @@ -386,7 +341,6 @@ apm_ioctl(struct inode * inode, struct file *filp, u_int cmd, u_long arg) static int apm_release(struct inode * inode, struct file * filp) { struct apm_user *as = filp->private_data; - int pending = 0; filp->private_data = NULL; @@ -396,18 +350,15 @@ static int apm_release(struct inode * inode, struct file * filp) /* * We are now unhooked from the chain. As far as new - * events are concerned, we no longer exist. However, we - * need to balance suspends_pending, which means the - * possibility of sleeping. + * events are concerned, we no longer exist. */ mutex_lock(&state_lock); - if (as->suspend_state != SUSPEND_NONE) { - suspends_pending -= 1; - pending = suspends_pending == 0; - } + if (as->suspend_state == SUSPEND_PENDING || + as->suspend_state == SUSPEND_READ) + atomic_dec(&suspend_acks_pending); mutex_unlock(&state_lock); - if (pending) - apm_suspend(); + + wake_up(&apm_suspend_waitqueue); kfree(as); return 0; @@ -545,7 +496,6 @@ static int kapmd(void *arg) { do { apm_event_t event; - int ret; wait_event_interruptible(kapmd_wait, !queue_empty(&kapmd_queue) || kthread_should_stop()); @@ -570,20 +520,13 @@ static int kapmd(void *arg) case APM_USER_SUSPEND: case APM_SYS_SUSPEND: - ret = queue_suspend_event(event, NULL); - if (ret < 0) { - /* - * We were busy. Try again in 50ms. - */ - queue_add_event(&kapmd_queue, event); - msleep(50); - } - if (ret > 0) - apm_suspend(); + pm_suspend(PM_SUSPEND_MEM); break; case APM_CRITICAL_SUSPEND: - apm_suspend(); + atomic_inc(&userspace_notification_inhibit); + pm_suspend(PM_SUSPEND_MEM); + atomic_dec(&userspace_notification_inhibit); break; } } while (1); @@ -591,6 +534,120 @@ static int kapmd(void *arg) return 0; } +static int apm_suspend_notifier(struct notifier_block *nb, + unsigned long event, + void *dummy) +{ + struct apm_user *as; + int err; + + /* short-cut emergency suspends */ + if (atomic_read(&userspace_notification_inhibit)) + return NOTIFY_DONE; + + switch (event) { + case PM_SUSPEND_PREPARE: + /* + * Queue an event to all "writer" users that we want + * to suspend and need their ack. + */ + mutex_lock(&state_lock); + down_read(&user_list_lock); + + list_for_each_entry(as, &apm_user_list, list) { + if (as->suspend_state != SUSPEND_WAIT && as->reader && + as->writer && as->suser) { + as->suspend_state = SUSPEND_PENDING; + atomic_inc(&suspend_acks_pending); + queue_add_event(&as->queue, APM_USER_SUSPEND); + } + } + + up_read(&user_list_lock); + mutex_unlock(&state_lock); + wake_up_interruptible(&apm_waitqueue); + + /* + * Wait for the the suspend_acks_pending variable to drop to + * zero, meaning everybody acked the suspend event (or the + * process was killed.) + * + * If the app won't answer within a short while we assume it + * locked up and ignore it. + */ + err = wait_event_interruptible_timeout( + apm_suspend_waitqueue, + atomic_read(&suspend_acks_pending) == 0, + 5*HZ); + + /* timed out */ + if (err == 0) { + /* + * Move anybody who timed out to "ack timeout" state. + * + * We could time out and the userspace does the ACK + * right after we time out but before we enter the + * locked section here, but that's fine. + */ + mutex_lock(&state_lock); + down_read(&user_list_lock); + list_for_each_entry(as, &apm_user_list, list) { + if (as->suspend_state == SUSPEND_PENDING || + as->suspend_state == SUSPEND_READ) { + as->suspend_state = SUSPEND_ACKTO; + atomic_dec(&suspend_acks_pending); + } + } + up_read(&user_list_lock); + mutex_unlock(&state_lock); + } + + /* let suspend proceed */ + if (err >= 0) + return NOTIFY_OK; + + /* interrupted by signal */ + return NOTIFY_BAD; + + case PM_POST_SUSPEND: + /* + * Anyone on the APM queues will think we're still suspended. + * Send a message so everyone knows we're now awake again. + */ + queue_event(APM_NORMAL_RESUME); + + /* + * Finally, wake up anyone who is sleeping on the suspend. + */ + mutex_lock(&state_lock); + down_read(&user_list_lock); + list_for_each_entry(as, &apm_user_list, list) { + if (as->suspend_state == SUSPEND_ACKED) { + /* + * TODO: maybe grab error code, needs core + * changes to push the error to the notifier + * chain (could use the second parameter if + * implemented) + */ + as->suspend_result = 0; + as->suspend_state = SUSPEND_DONE; + } + } + up_read(&user_list_lock); + mutex_unlock(&state_lock); + + wake_up(&apm_suspend_waitqueue); + return NOTIFY_OK; + + default: + return NOTIFY_DONE; + } +} + +static struct notifier_block apm_notif_block = { + .notifier_call = apm_suspend_notifier, +}; + static int __init apm_init(void) { int ret; @@ -604,7 +661,7 @@ static int __init apm_init(void) if (IS_ERR(kapmd_tsk)) { ret = PTR_ERR(kapmd_tsk); kapmd_tsk = NULL; - return ret; + goto out; } wake_up_process(kapmd_tsk); @@ -613,16 +670,27 @@ static int __init apm_init(void) #endif ret = misc_register(&apm_device); - if (ret != 0) { - remove_proc_entry("apm", NULL); - kthread_stop(kapmd_tsk); - } + if (ret) + goto out_stop; + ret = register_pm_notifier(&apm_notif_block); + if (ret) + goto out_unregister; + + return 0; + + out_unregister: + misc_deregister(&apm_device); + out_stop: + remove_proc_entry("apm", NULL); + kthread_stop(kapmd_tsk); + out: return ret; } static void __exit apm_exit(void) { + unregister_pm_notifier(&apm_notif_block); misc_deregister(&apm_device); remove_proc_entry("apm", NULL); -- cgit v1.2.3 From ebb12db51f6c13b30752fcf506baad4c617b153c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 11 Jun 2008 22:04:29 +0200 Subject: Freezer: Introduce PF_FREEZER_NOSIG The freezer currently attempts to distinguish kernel threads from user space tasks by checking if their mm pointer is unset and it does not send fake signals to kernel threads. However, there are kernel threads, mostly related to networking, that behave like user space tasks and may want to be sent a fake signal to be frozen. Introduce the new process flag PF_FREEZER_NOSIG that will be set by default for all kernel threads and make the freezer only send fake signals to the tasks having PF_FREEZER_NOSIG unset. Provide the set_freezable_with_signal() function to be called by the kernel threads that want to be sent a fake signal for freezing. This patch should not change the freezer's observable behavior. Signed-off-by: Rafael J. Wysocki Signed-off-by: Andi Kleen Acked-by: Pavel Machek Signed-off-by: Len Brown --- include/linux/freezer.h | 10 +++++ include/linux/sched.h | 1 + kernel/kthread.c | 2 +- kernel/power/process.c | 97 +++++++++++++++++++++---------------------------- 4 files changed, 54 insertions(+), 56 deletions(-) diff --git a/include/linux/freezer.h b/include/linux/freezer.h index 08934995c7ab..deddeedf3257 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -127,6 +127,15 @@ static inline void set_freezable(void) current->flags &= ~PF_NOFREEZE; } +/* + * Tell the freezer that the current task should be frozen by it and that it + * should send a fake signal to the task to freeze it. + */ +static inline void set_freezable_with_signal(void) +{ + current->flags &= ~(PF_NOFREEZE | PF_FREEZER_NOSIG); +} + /* * Freezer-friendly wrappers around wait_event_interruptible() and * wait_event_interruptible_timeout(), originally defined in @@ -174,6 +183,7 @@ static inline void freezer_do_not_count(void) {} static inline void freezer_count(void) {} static inline int freezer_should_skip(struct task_struct *p) { return 0; } static inline void set_freezable(void) {} +static inline void set_freezable_with_signal(void) {} #define wait_event_freezable(wq, condition) \ wait_event_interruptible(wq, condition) diff --git a/include/linux/sched.h b/include/linux/sched.h index 21349173d148..ba2f859c6e4f 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1494,6 +1494,7 @@ static inline void put_task_struct(struct task_struct *t) #define PF_MEMPOLICY 0x10000000 /* Non-default NUMA mempolicy */ #define PF_MUTEX_TESTER 0x20000000 /* Thread belongs to the rt mutex tester */ #define PF_FREEZER_SKIP 0x40000000 /* Freezer should not count it as freezeable */ +#define PF_FREEZER_NOSIG 0x80000000 /* Freezer won't send signals to it */ /* * Only the _current_ task can read/write to tsk->flags, but other diff --git a/kernel/kthread.c b/kernel/kthread.c index 97747cdd37c9..ac3fb7326641 100644 --- a/kernel/kthread.c +++ b/kernel/kthread.c @@ -235,7 +235,7 @@ int kthreadd(void *unused) set_user_nice(tsk, KTHREAD_NICE_LEVEL); set_cpus_allowed(tsk, CPU_MASK_ALL); - current->flags |= PF_NOFREEZE; + current->flags |= PF_NOFREEZE | PF_FREEZER_NOSIG; for (;;) { set_current_state(TASK_INTERRUPTIBLE); diff --git a/kernel/power/process.c b/kernel/power/process.c index f1d0b345c9ba..5fb87652f214 100644 --- a/kernel/power/process.c +++ b/kernel/power/process.c @@ -19,9 +19,6 @@ */ #define TIMEOUT (20 * HZ) -#define FREEZER_KERNEL_THREADS 0 -#define FREEZER_USER_SPACE 1 - static inline int freezeable(struct task_struct * p) { if ((p == current) || @@ -84,63 +81,53 @@ static void fake_signal_wake_up(struct task_struct *p) spin_unlock_irqrestore(&p->sighand->siglock, flags); } -static int has_mm(struct task_struct *p) +static inline bool should_send_signal(struct task_struct *p) { - return (p->mm && !(p->flags & PF_BORROWED_MM)); + return !(p->flags & PF_FREEZER_NOSIG); } /** * freeze_task - send a freeze request to given task * @p: task to send the request to - * @with_mm_only: if set, the request will only be sent if the task has its - * own mm - * Return value: 0, if @with_mm_only is set and the task has no mm of its - * own or the task is frozen, 1, otherwise + * @sig_only: if set, the request will only be sent if the task has the + * PF_FREEZER_NOSIG flag unset + * Return value: 'false', if @sig_only is set and the task has + * PF_FREEZER_NOSIG set or the task is frozen, 'true', otherwise * - * The freeze request is sent by seting the tasks's TIF_FREEZE flag and + * The freeze request is sent by setting the tasks's TIF_FREEZE flag and * either sending a fake signal to it or waking it up, depending on whether - * or not it has its own mm (ie. it is a user land task). If @with_mm_only - * is set and the task has no mm of its own (ie. it is a kernel thread), - * its TIF_FREEZE flag should not be set. - * - * The task_lock() is necessary to prevent races with exit_mm() or - * use_mm()/unuse_mm() from occuring. + * or not it has PF_FREEZER_NOSIG set. If @sig_only is set and the task + * has PF_FREEZER_NOSIG set (ie. it is a typical kernel thread), its + * TIF_FREEZE flag will not be set. */ -static int freeze_task(struct task_struct *p, int with_mm_only) +static bool freeze_task(struct task_struct *p, bool sig_only) { - int ret = 1; + /* + * We first check if the task is freezing and next if it has already + * been frozen to avoid the race with frozen_process() which first marks + * the task as frozen and next clears its TIF_FREEZE. + */ + if (!freezing(p)) { + rmb(); + if (frozen(p)) + return false; - task_lock(p); - if (freezing(p)) { - if (has_mm(p)) { - if (!signal_pending(p)) - fake_signal_wake_up(p); - } else { - if (with_mm_only) - ret = 0; - else - wake_up_state(p, TASK_INTERRUPTIBLE); - } + if (!sig_only || should_send_signal(p)) + set_freeze_flag(p); + else + return false; + } + + if (should_send_signal(p)) { + if (!signal_pending(p)) + fake_signal_wake_up(p); + } else if (sig_only) { + return false; } else { - rmb(); - if (frozen(p)) { - ret = 0; - } else { - if (has_mm(p)) { - set_freeze_flag(p); - fake_signal_wake_up(p); - } else { - if (with_mm_only) { - ret = 0; - } else { - set_freeze_flag(p); - wake_up_state(p, TASK_INTERRUPTIBLE); - } - } - } + wake_up_state(p, TASK_INTERRUPTIBLE); } - task_unlock(p); - return ret; + + return true; } static void cancel_freezing(struct task_struct *p) @@ -156,7 +143,7 @@ static void cancel_freezing(struct task_struct *p) } } -static int try_to_freeze_tasks(int freeze_user_space) +static int try_to_freeze_tasks(bool sig_only) { struct task_struct *g, *p; unsigned long end_time; @@ -175,7 +162,7 @@ static int try_to_freeze_tasks(int freeze_user_space) if (frozen(p) || !freezeable(p)) continue; - if (!freeze_task(p, freeze_user_space)) + if (!freeze_task(p, sig_only)) continue; /* @@ -235,13 +222,13 @@ int freeze_processes(void) int error; printk("Freezing user space processes ... "); - error = try_to_freeze_tasks(FREEZER_USER_SPACE); + error = try_to_freeze_tasks(true); if (error) goto Exit; printk("done.\n"); printk("Freezing remaining freezable tasks ... "); - error = try_to_freeze_tasks(FREEZER_KERNEL_THREADS); + error = try_to_freeze_tasks(false); if (error) goto Exit; printk("done."); @@ -251,7 +238,7 @@ int freeze_processes(void) return error; } -static void thaw_tasks(int thaw_user_space) +static void thaw_tasks(bool nosig_only) { struct task_struct *g, *p; @@ -260,7 +247,7 @@ static void thaw_tasks(int thaw_user_space) if (!freezeable(p)) continue; - if (!p->mm == thaw_user_space) + if (nosig_only && should_send_signal(p)) continue; thaw_process(p); @@ -271,8 +258,8 @@ static void thaw_tasks(int thaw_user_space) void thaw_processes(void) { printk("Restarting tasks ... "); - thaw_tasks(FREEZER_KERNEL_THREADS); - thaw_tasks(FREEZER_USER_SPACE); + thaw_tasks(true); + thaw_tasks(false); schedule(); printk("done.\n"); } -- cgit v1.2.3 From 52d11025dba32bed696eaee1822b26529e764770 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 11 Jun 2008 22:07:52 +0200 Subject: snapshot: Push BKL down into ioctl handlers Push BKL down into ioctl handlers - snapshot device. Signed-off-by: Alan Cox Signed-off-by: Rafael J. Wysocki Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- kernel/power/user.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/kernel/power/user.c b/kernel/power/user.c index f5512cb3aa86..658262b15994 100644 --- a/kernel/power/user.c +++ b/kernel/power/user.c @@ -23,6 +23,7 @@ #include #include #include +#include #include @@ -164,8 +165,8 @@ static ssize_t snapshot_write(struct file *filp, const char __user *buf, return res; } -static int snapshot_ioctl(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) +static long snapshot_ioctl(struct file *filp, unsigned int cmd, + unsigned long arg) { int error = 0; struct snapshot_data *data; @@ -181,6 +182,8 @@ static int snapshot_ioctl(struct inode *inode, struct file *filp, data = filp->private_data; + lock_kernel(); + switch (cmd) { case SNAPSHOT_FREEZE: @@ -389,7 +392,7 @@ static int snapshot_ioctl(struct inode *inode, struct file *filp, error = -ENOTTY; } - + unlock_kernel(); return error; } @@ -399,7 +402,7 @@ static const struct file_operations snapshot_fops = { .read = snapshot_read, .write = snapshot_write, .llseek = no_llseek, - .ioctl = snapshot_ioctl, + .unlocked_ioctl = snapshot_ioctl, }; static struct miscdevice snapshot_device = { -- cgit v1.2.3 From 25f2f3daadaf0768a61d02ee3ed3d9a21e9dc46c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 11 Jun 2008 22:09:45 +0200 Subject: snapshot: Use pm_mutex for mutual exclusion We can avoid taking the BKL in snapshot_ioctl() if pm_mutex is used to prevent the ioctls from being executed concurrently. In addition, although it is only possible to open /dev/snapshot once, the task which has done that may spawn a child that will inherit the open descriptor, so in theory they can call snapshot_write(), snapshot_read() and snapshot_release() concurrently. pm_mutex can also be used for mutual exclusion in such cases. Signed-off-by: Rafael J. Wysocki Signed-off-by: Andi Kleen Acked-by: Pavel Machek Signed-off-by: Len Brown --- kernel/power/user.c | 68 +++++++++++++++++++++++++++++++++-------------------- 1 file changed, 42 insertions(+), 26 deletions(-) diff --git a/kernel/power/user.c b/kernel/power/user.c index 658262b15994..a6332a313262 100644 --- a/kernel/power/user.c +++ b/kernel/power/user.c @@ -70,16 +70,22 @@ static int snapshot_open(struct inode *inode, struct file *filp) struct snapshot_data *data; int error; - if (!atomic_add_unless(&snapshot_device_available, -1, 0)) - return -EBUSY; + mutex_lock(&pm_mutex); + + if (!atomic_add_unless(&snapshot_device_available, -1, 0)) { + error = -EBUSY; + goto Unlock; + } if ((filp->f_flags & O_ACCMODE) == O_RDWR) { atomic_inc(&snapshot_device_available); - return -ENOSYS; + error = -ENOSYS; + goto Unlock; } if(create_basic_memory_bitmaps()) { atomic_inc(&snapshot_device_available); - return -ENOMEM; + error = -ENOMEM; + goto Unlock; } nonseekable_open(inode, filp); data = &snapshot_state; @@ -99,33 +105,36 @@ static int snapshot_open(struct inode *inode, struct file *filp) if (error) pm_notifier_call_chain(PM_POST_HIBERNATION); } - if (error) { + if (error) atomic_inc(&snapshot_device_available); - return error; - } data->frozen = 0; data->ready = 0; data->platform_support = 0; - return 0; + Unlock: + mutex_unlock(&pm_mutex); + + return error; } static int snapshot_release(struct inode *inode, struct file *filp) { struct snapshot_data *data; + mutex_lock(&pm_mutex); + swsusp_free(); free_basic_memory_bitmaps(); data = filp->private_data; free_all_swap_pages(data->swap); - if (data->frozen) { - mutex_lock(&pm_mutex); + if (data->frozen) thaw_processes(); - mutex_unlock(&pm_mutex); - } pm_notifier_call_chain(data->mode == O_WRONLY ? PM_POST_HIBERNATION : PM_POST_RESTORE); atomic_inc(&snapshot_device_available); + + mutex_unlock(&pm_mutex); + return 0; } @@ -135,9 +144,13 @@ static ssize_t snapshot_read(struct file *filp, char __user *buf, struct snapshot_data *data; ssize_t res; + mutex_lock(&pm_mutex); + data = filp->private_data; - if (!data->ready) - return -ENODATA; + if (!data->ready) { + res = -ENODATA; + goto Unlock; + } res = snapshot_read_next(&data->handle, count); if (res > 0) { if (copy_to_user(buf, data_of(data->handle), res)) @@ -145,6 +158,10 @@ static ssize_t snapshot_read(struct file *filp, char __user *buf, else *offp = data->handle.offset; } + + Unlock: + mutex_unlock(&pm_mutex); + return res; } @@ -154,6 +171,8 @@ static ssize_t snapshot_write(struct file *filp, const char __user *buf, struct snapshot_data *data; ssize_t res; + mutex_lock(&pm_mutex); + data = filp->private_data; res = snapshot_write_next(&data->handle, count); if (res > 0) { @@ -162,6 +181,9 @@ static ssize_t snapshot_write(struct file *filp, const char __user *buf, else *offp = data->handle.offset; } + + mutex_unlock(&pm_mutex); + return res; } @@ -180,16 +202,16 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd, if (!capable(CAP_SYS_ADMIN)) return -EPERM; - data = filp->private_data; + if (!mutex_trylock(&pm_mutex)) + return -EBUSY; - lock_kernel(); + data = filp->private_data; switch (cmd) { case SNAPSHOT_FREEZE: if (data->frozen) break; - mutex_lock(&pm_mutex); printk("Syncing filesystems ... "); sys_sync(); printk("done.\n"); @@ -197,7 +219,6 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd, error = freeze_processes(); if (error) thaw_processes(); - mutex_unlock(&pm_mutex); if (!error) data->frozen = 1; break; @@ -205,9 +226,7 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd, case SNAPSHOT_UNFREEZE: if (!data->frozen || data->ready) break; - mutex_lock(&pm_mutex); thaw_processes(); - mutex_unlock(&pm_mutex); data->frozen = 0; break; @@ -310,16 +329,11 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd, error = -EPERM; break; } - if (!mutex_trylock(&pm_mutex)) { - error = -EBUSY; - break; - } /* * Tasks are frozen and the notifiers have been called with * PM_HIBERNATION_PREPARE */ error = suspend_devices_and_enter(PM_SUSPEND_MEM); - mutex_unlock(&pm_mutex); break; case SNAPSHOT_PLATFORM_SUPPORT: @@ -392,7 +406,9 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd, error = -ENOTTY; } - unlock_kernel(); + + mutex_unlock(&pm_mutex); + return error; } -- cgit v1.2.3 From c735ab7da3414c3e639d5c5223092b74689e5d87 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 26 Jun 2008 22:27:21 -0400 Subject: fujitsu-laptop: depends on INPUT fujitsu-laptop uses input_* functions, so it should depend on INPUT. drivers/built-in.o: In function `acpi_fujitsu_add': fujitsu-laptop.c:(.text+0xaaec7): undefined reference to `input_allocate_device' fujitsu-laptop.c:(.text+0xaaf39): undefined reference to `input_register_device' fujitsu-laptop.c:(.text+0xab025): undefined reference to `input_free_device' drivers/built-in.o: In function `acpi_fujitsu_notify': fujitsu-laptop.c:(.text+0xab0d8): undefined reference to `input_event' fujitsu-laptop.c:(.text+0xab0e5): undefined reference to `input_event' fujitsu-laptop.c:(.text+0xab0f5): undefined reference to `input_event' fujitsu-laptop.c:(.text+0xab102): undefined reference to `input_event' drivers/built-in.o: In function `acpi_fujitsu_hotkey_notify': fujitsu-laptop.c:(.text+0xab261): undefined reference to `input_event' drivers/built-in.o:fujitsu-laptop.c:(.text+0xab26e): more undefined references to `input_event' follow drivers/built-in.o: In function `acpi_fujitsu_hotkey_add': fujitsu-laptop.c:(.text+0xab49c): undefined reference to `input_allocate_device' fujitsu-laptop.c:(.text+0xab51a): undefined reference to `input_register_device' fujitsu-laptop.c:(.text+0xab5e4): undefined reference to `input_free_device' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap Signed-off-by: Andi Kleen Acked-by: Jonathan Woithe Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/misc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 0551d95a749a..1921b8dbb242 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -179,6 +179,7 @@ config FUJITSU_LAPTOP tristate "Fujitsu Laptop Extras" depends on X86 depends on ACPI + depends on INPUT depends on BACKLIGHT_CLASS_DEVICE ---help--- This is a driver for laptops built by Fujitsu: -- cgit v1.2.3 From f3454ae8104efb2dbf0d08ec42c6f5d0fe9225bc Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 12:25:42 +0800 Subject: ACPICA: Add argument count checking to control method invocation via acpi_evaluate_object Error if too few arguments, warning if too many. This applies only to external programmatic control method execution, not method-to-method calls within the AML. Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/namespace/nseval.c | 35 +++++++++++++++++++++++++++++++++++ include/acpi/acexcep.h | 6 ++++-- include/acpi/acstruct.h | 1 + 3 files changed, 40 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/namespace/nseval.c b/drivers/acpi/namespace/nseval.c index 14bdfa92bea0..d369164e00b0 100644 --- a/drivers/acpi/namespace/nseval.c +++ b/drivers/acpi/namespace/nseval.c @@ -138,6 +138,41 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info * info) return_ACPI_STATUS(AE_NULL_OBJECT); } + /* + * Calculate the number of arguments being passed to the method + */ + + info->param_count = 0; + if (info->parameters) { + while (info->parameters[info->param_count]) + info->param_count++; + } + + /* Error if too few arguments were passed in */ + + if (info->param_count < info->obj_desc->method.param_count) { + ACPI_ERROR((AE_INFO, + "Insufficient arguments - " + "method [%4.4s] needs %d, found %d", + acpi_ut_get_node_name(info->resolved_node), + info->obj_desc->method.param_count, + info->param_count)); + return_ACPI_STATUS(AE_MISSING_ARGUMENTS); + } + + /* Just a warning if too many arguments */ + + else if (info->param_count > + info->obj_desc->method.param_count) { + ACPI_WARNING((AE_INFO, + "Excess arguments - " + "method [%4.4s] needs %d, found %d", + acpi_ut_get_node_name(info-> + resolved_node), + info->obj_desc->method.param_count, + info->param_count)); + } + ACPI_DUMP_PATHNAME(info->resolved_node, "Execute Method:", ACPI_LV_INFO, _COMPONENT); diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h index 1f591171bf31..ea627ed2420d 100644 --- a/include/acpi/acexcep.h +++ b/include/acpi/acexcep.h @@ -108,8 +108,9 @@ #define AE_BAD_HEX_CONSTANT (acpi_status) (0x0007 | AE_CODE_PROGRAMMER) #define AE_BAD_OCTAL_CONSTANT (acpi_status) (0x0008 | AE_CODE_PROGRAMMER) #define AE_BAD_DECIMAL_CONSTANT (acpi_status) (0x0009 | AE_CODE_PROGRAMMER) +#define AE_MISSING_ARGUMENTS (acpi_status) (0x000A | AE_CODE_PROGRAMMER) -#define AE_CODE_PGM_MAX 0x0009 +#define AE_CODE_PGM_MAX 0x000A /* * Acpi table exceptions @@ -233,7 +234,8 @@ char const *acpi_gbl_exception_names_pgm[] = { "AE_ALIGNMENT", "AE_BAD_HEX_CONSTANT", "AE_BAD_OCTAL_CONSTANT", - "AE_BAD_DECIMAL_CONSTANT" + "AE_BAD_DECIMAL_CONSTANT", + "AE_MISSING_ARGUMENTS" }; char const *acpi_gbl_exception_names_tbl[] = { diff --git a/include/acpi/acstruct.h b/include/acpi/acstruct.h index a907c67d651e..1cc74504f1c4 100644 --- a/include/acpi/acstruct.h +++ b/include/acpi/acstruct.h @@ -189,6 +189,7 @@ struct acpi_evaluate_info { union acpi_operand_object **parameters; struct acpi_namespace_node *resolved_node; union acpi_operand_object *return_object; + u8 param_count; u8 pass_number; u8 parameter_type; u8 return_object_type; -- cgit v1.2.3 From c91d924e3af08d4f98eab6ebf81f2b8ce132448f Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 12:38:10 +0800 Subject: ACPICA: Fix for hang on GPE method invocation Fixes problem where the new method argument count validation mechanism will enter an infinite loop when a GPE method is dispatched. Problem fixed be removing the obsolete code that passes GPE block information to the notify handler via the control method parameter pointer. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/dispatcher/dsmethod.c | 1 - drivers/acpi/dispatcher/dswstate.c | 10 ++-------- drivers/acpi/events/evgpe.c | 4 ---- drivers/acpi/events/evregion.c | 1 - drivers/acpi/namespace/nsinit.c | 1 - drivers/acpi/namespace/nsxfeval.c | 1 - drivers/acpi/parser/psxface.c | 2 +- drivers/acpi/resources/rsutils.c | 1 - drivers/acpi/utilities/uteval.c | 1 - include/acpi/acstruct.h | 7 ------- 10 files changed, 3 insertions(+), 26 deletions(-) diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c index 2509809a36cf..4613b9ca5792 100644 --- a/drivers/acpi/dispatcher/dsmethod.c +++ b/drivers/acpi/dispatcher/dsmethod.c @@ -377,7 +377,6 @@ acpi_ds_call_control_method(struct acpi_thread_state *thread, } info->parameters = &this_walk_state->operands[0]; - info->parameter_type = ACPI_PARAM_ARGS; status = acpi_ds_init_aml_walk(next_walk_state, NULL, method_node, obj_desc->method.aml_start, diff --git a/drivers/acpi/dispatcher/dswstate.c b/drivers/acpi/dispatcher/dswstate.c index 1386ced332ec..bda23ed60645 100644 --- a/drivers/acpi/dispatcher/dswstate.c +++ b/drivers/acpi/dispatcher/dswstate.c @@ -615,14 +615,8 @@ acpi_ds_init_aml_walk(struct acpi_walk_state *walk_state, walk_state->pass_number = pass_number; if (info) { - if (info->parameter_type == ACPI_PARAM_GPE) { - walk_state->gpe_event_info = - ACPI_CAST_PTR(struct acpi_gpe_event_info, - info->parameters); - } else { - walk_state->params = info->parameters; - walk_state->caller_return_desc = &info->return_object; - } + walk_state->params = info->parameters; + walk_state->caller_return_desc = &info->return_object; } status = acpi_ps_init_scope(&walk_state->parser_state, op); diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c index e0339d4139a4..ca356e5ae2c3 100644 --- a/drivers/acpi/events/evgpe.c +++ b/drivers/acpi/events/evgpe.c @@ -565,10 +565,6 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) */ info->prefix_node = local_gpe_event_info.dispatch.method_node; - info->parameters = - ACPI_CAST_PTR(union acpi_operand_object *, - gpe_event_info); - info->parameter_type = ACPI_PARAM_GPE; info->flags = ACPI_IGNORE_RETURN_VALUE; status = acpi_ns_evaluate(info); diff --git a/drivers/acpi/events/evregion.c b/drivers/acpi/events/evregion.c index 1628f5934752..5ab4c01417df 100644 --- a/drivers/acpi/events/evregion.c +++ b/drivers/acpi/events/evregion.c @@ -219,7 +219,6 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function) info->prefix_node = region_obj2->extra.method_REG; info->pathname = NULL; info->parameters = args; - info->parameter_type = ACPI_PARAM_ARGS; info->flags = ACPI_IGNORE_RETURN_VALUE; /* diff --git a/drivers/acpi/namespace/nsinit.c b/drivers/acpi/namespace/nsinit.c index 6d6d930c8e18..e4c57510d798 100644 --- a/drivers/acpi/namespace/nsinit.c +++ b/drivers/acpi/namespace/nsinit.c @@ -542,7 +542,6 @@ acpi_ns_init_one_device(acpi_handle obj_handle, info->prefix_node = device_node; info->pathname = METHOD_NAME__INI; info->parameters = NULL; - info->parameter_type = ACPI_PARAM_ARGS; info->flags = ACPI_IGNORE_RETURN_VALUE; /* diff --git a/drivers/acpi/namespace/nsxfeval.c b/drivers/acpi/namespace/nsxfeval.c index a8d549187c84..b4e135eab7c7 100644 --- a/drivers/acpi/namespace/nsxfeval.c +++ b/drivers/acpi/namespace/nsxfeval.c @@ -182,7 +182,6 @@ acpi_evaluate_object(acpi_handle handle, } info->pathname = pathname; - info->parameter_type = ACPI_PARAM_ARGS; /* Convert and validate the device handle */ diff --git a/drivers/acpi/parser/psxface.c b/drivers/acpi/parser/psxface.c index 52581454c47c..5ee09e1245e3 100644 --- a/drivers/acpi/parser/psxface.c +++ b/drivers/acpi/parser/psxface.c @@ -335,7 +335,7 @@ acpi_ps_update_parameter_list(struct acpi_evaluate_info *info, u16 action) { acpi_native_uint i; - if ((info->parameter_type == ACPI_PARAM_ARGS) && (info->parameters)) { + if (info->parameters) { /* Update reference count for each parameter */ diff --git a/drivers/acpi/resources/rsutils.c b/drivers/acpi/resources/rsutils.c index befe2302f41b..90ed83d05375 100644 --- a/drivers/acpi/resources/rsutils.c +++ b/drivers/acpi/resources/rsutils.c @@ -679,7 +679,6 @@ acpi_rs_set_srs_method_data(struct acpi_namespace_node *node, info->prefix_node = node; info->pathname = METHOD_NAME__SRS; info->parameters = args; - info->parameter_type = ACPI_PARAM_ARGS; info->flags = ACPI_IGNORE_RETURN_VALUE; /* diff --git a/drivers/acpi/utilities/uteval.c b/drivers/acpi/utilities/uteval.c index 05e61be267d5..7f1f6341242d 100644 --- a/drivers/acpi/utilities/uteval.c +++ b/drivers/acpi/utilities/uteval.c @@ -217,7 +217,6 @@ acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node, info->prefix_node = prefix_node; info->pathname = path; - info->parameter_type = ACPI_PARAM_ARGS; /* Evaluate the object/method */ diff --git a/include/acpi/acstruct.h b/include/acpi/acstruct.h index 1cc74504f1c4..818c24d7d2d1 100644 --- a/include/acpi/acstruct.h +++ b/include/acpi/acstruct.h @@ -108,7 +108,6 @@ struct acpi_walk_state { union acpi_operand_object **caller_return_desc; union acpi_generic_state *control_state; /* List of control states (nested IFs) */ struct acpi_namespace_node *deferred_node; /* Used when executing deferred opcodes */ - struct acpi_gpe_event_info *gpe_event_info; /* Info for GPE (_Lxx/_Exx methods only */ union acpi_operand_object *implicit_return_obj; struct acpi_namespace_node *method_call_node; /* Called method Node */ union acpi_parse_object *method_call_op; /* method_call Op if running a method */ @@ -191,16 +190,10 @@ struct acpi_evaluate_info { union acpi_operand_object *return_object; u8 param_count; u8 pass_number; - u8 parameter_type; u8 return_object_type; u8 flags; }; -/* Types for parameter_type above */ - -#define ACPI_PARAM_ARGS 0 -#define ACPI_PARAM_GPE 1 - /* Values for Flags above */ #define ACPI_IGNORE_RETURN_VALUE 1 -- cgit v1.2.3 From 6719561f9b4281491f58ed9f0bbc179dc7db95b7 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Tue, 10 Jun 2008 12:49:56 +0800 Subject: ACPICA: Update tracking macros to reduce code/data size Changed ACPI_MODULE_NAME and ACPI_FUNCTION_NAME to use arrays of strings instead of pointers to static strings. Jan Beulich and Bob Moore. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- include/acpi/acmacros.h | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h index fb41a3b802fc..5ad6e3992304 100644 --- a/include/acpi/acmacros.h +++ b/include/acpi/acmacros.h @@ -414,7 +414,7 @@ struct acpi_integer_overlay { * error messages. The __FILE__ macro is not very useful for this, because it * often includes the entire pathname to the module */ -#define ACPI_MODULE_NAME(name) static char ACPI_UNUSED_VAR *_acpi_module_name = name; +#define ACPI_MODULE_NAME(name) static char ACPI_UNUSED_VAR _acpi_module_name[] = name; #else #define ACPI_MODULE_NAME(name) #endif @@ -467,19 +467,17 @@ struct acpi_integer_overlay { /* * If ACPI_GET_FUNCTION_NAME was not defined in the compiler-dependent header, * define it now. This is the case where there the compiler does not support - * a __FUNCTION__ macro or equivalent. We save the function name on the - * local stack. + * a __FUNCTION__ macro or equivalent. */ #ifndef ACPI_GET_FUNCTION_NAME #define ACPI_GET_FUNCTION_NAME _acpi_function_name /* * The Name parameter should be the procedure name as a quoted string. - * This is declared as a local string ("MyFunctionName") so that it can - * be also used by the function exit macros below. + * The function name is also used by the function exit macros below. * Note: (const char) is used to be compatible with the debug interfaces * and macros such as __FUNCTION__. */ -#define ACPI_FUNCTION_NAME(name) const char *_acpi_function_name = #name; +#define ACPI_FUNCTION_NAME(name) static const char _acpi_function_name[] = #name; #else /* Compiler supports __FUNCTION__ (or equivalent) -- Ignore this macro */ -- cgit v1.2.3 From 11f2a61ab418305167f9a3f3a31a50449222f64b Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 12:53:01 +0800 Subject: ACPICA: Fix possible negative array index in acpi_ut_validate_exception Added NULL fields to the exception string arrays to eliminate the -1 subtraction on the SubStatus field. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/utilities/utmisc.c | 14 +++++--------- include/acpi/acexcep.h | 4 ++++ 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c index 1f057b71db1a..47354d9b0e56 100644 --- a/drivers/acpi/utilities/utmisc.c +++ b/drivers/acpi/utilities/utmisc.c @@ -64,7 +64,7 @@ ACPI_MODULE_NAME("utmisc") ******************************************************************************/ const char *acpi_ut_validate_exception(acpi_status status) { - acpi_status sub_status; + u32 sub_status; const char *exception = NULL; ACPI_FUNCTION_ENTRY(); @@ -85,32 +85,28 @@ const char *acpi_ut_validate_exception(acpi_status status) case AE_CODE_PROGRAMMER: if (sub_status <= AE_CODE_PGM_MAX) { - exception = - acpi_gbl_exception_names_pgm[sub_status - 1]; + exception = acpi_gbl_exception_names_pgm[sub_status]; } break; case AE_CODE_ACPI_TABLES: if (sub_status <= AE_CODE_TBL_MAX) { - exception = - acpi_gbl_exception_names_tbl[sub_status - 1]; + exception = acpi_gbl_exception_names_tbl[sub_status]; } break; case AE_CODE_AML: if (sub_status <= AE_CODE_AML_MAX) { - exception = - acpi_gbl_exception_names_aml[sub_status - 1]; + exception = acpi_gbl_exception_names_aml[sub_status]; } break; case AE_CODE_CONTROL: if (sub_status <= AE_CODE_CTRL_MAX) { - exception = - acpi_gbl_exception_names_ctrl[sub_status - 1]; + exception = acpi_gbl_exception_names_ctrl[sub_status]; } break; diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h index ea627ed2420d..e5a890ffeb02 100644 --- a/include/acpi/acexcep.h +++ b/include/acpi/acexcep.h @@ -226,6 +226,7 @@ char const *acpi_gbl_exception_names_env[] = { }; char const *acpi_gbl_exception_names_pgm[] = { + NULL, "AE_BAD_PARAMETER", "AE_BAD_CHARACTER", "AE_BAD_PATHNAME", @@ -239,6 +240,7 @@ char const *acpi_gbl_exception_names_pgm[] = { }; char const *acpi_gbl_exception_names_tbl[] = { + NULL, "AE_BAD_SIGNATURE", "AE_BAD_HEADER", "AE_BAD_CHECKSUM", @@ -248,6 +250,7 @@ char const *acpi_gbl_exception_names_tbl[] = { }; char const *acpi_gbl_exception_names_aml[] = { + NULL, "AE_AML_ERROR", "AE_AML_PARSE", "AE_AML_BAD_OPCODE", @@ -285,6 +288,7 @@ char const *acpi_gbl_exception_names_aml[] = { }; char const *acpi_gbl_exception_names_ctrl[] = { + NULL, "AE_CTRL_RETURN_VALUE", "AE_CTRL_PENDING", "AE_CTRL_TERMINATE", -- cgit v1.2.3 From 67a119f990063f5662574f6d6414fe9bc5ece86a Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 13:42:13 +0800 Subject: ACPICA: Eliminate acpi_native_uint type v2 No longer needed; replaced mostly with u32, but also acpi_size where a type that changes 32/64 bit on 32/64-bit platforms is required. v2: Fix a cast of a 32-bit int to a pointer in ACPI to avoid a compiler warning. from David Howells Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/bus.c | 2 +- drivers/acpi/dispatcher/dsinit.c | 2 +- drivers/acpi/dispatcher/dsopcode.c | 2 +- drivers/acpi/dispatcher/dswstate.c | 10 +++++----- drivers/acpi/events/evevent.c | 6 +++--- drivers/acpi/events/evgpe.c | 14 ++++---------- drivers/acpi/events/evgpeblk.c | 18 ++++++++++-------- drivers/acpi/events/evmisc.c | 4 ++-- drivers/acpi/events/evregion.c | 4 ++-- drivers/acpi/events/evrgnini.c | 2 +- drivers/acpi/executer/exconfig.c | 17 +++++++++-------- drivers/acpi/executer/exconvrt.c | 12 ++++++------ drivers/acpi/executer/exdump.c | 2 +- drivers/acpi/executer/exfldio.c | 9 +++++---- drivers/acpi/executer/exmisc.c | 8 ++++---- drivers/acpi/executer/exregion.c | 2 +- drivers/acpi/namespace/nsdump.c | 2 +- drivers/acpi/namespace/nsload.c | 3 +-- drivers/acpi/namespace/nsparse.c | 15 +++++++-------- drivers/acpi/namespace/nsutils.c | 26 ++++++++++++-------------- drivers/acpi/namespace/nsxfeval.c | 2 +- drivers/acpi/parser/psargs.c | 4 ++-- drivers/acpi/parser/psxface.c | 2 +- drivers/acpi/resources/rscalc.c | 4 ++-- drivers/acpi/resources/rsmisc.c | 2 +- drivers/acpi/resources/rsutils.c | 12 ++++++------ drivers/acpi/tables/tbfadt.c | 6 +++--- drivers/acpi/tables/tbfind.c | 5 ++--- drivers/acpi/tables/tbinstal.c | 30 ++++++++++++++---------------- drivers/acpi/tables/tbutils.c | 15 +++++++-------- drivers/acpi/tables/tbxface.c | 28 +++++++++++++--------------- drivers/acpi/tables/tbxfroot.c | 4 ++-- drivers/acpi/utilities/utcopy.c | 4 ++-- drivers/acpi/utilities/utdebug.c | 28 +++++++++++++++++----------- drivers/acpi/utilities/utdelete.c | 2 +- drivers/acpi/utilities/uteval.c | 4 ++-- drivers/acpi/utilities/utmisc.c | 14 +++++++------- drivers/acpi/utilities/utobject.c | 4 ++-- include/acpi/acdispat.h | 2 +- include/acpi/acglobal.h | 2 +- include/acpi/acmacros.h | 24 ++++++++++++------------ include/acpi/acnamesp.h | 10 ++++------ include/acpi/acpiosxf.h | 2 +- include/acpi/acpixf.h | 8 ++++---- include/acpi/acstruct.h | 2 +- include/acpi/actables.h | 27 ++++++++++++--------------- include/acpi/actypes.h | 16 ++++++---------- include/acpi/acutils.h | 4 ++-- 48 files changed, 206 insertions(+), 221 deletions(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index a6dbcf4d9ef5..afb34387d5f2 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -612,7 +612,7 @@ static int __init acpi_bus_init_irq(void) return 0; } -acpi_native_uint acpi_gbl_permanent_mmap; +u8 acpi_gbl_permanent_mmap; void __init acpi_early_init(void) diff --git a/drivers/acpi/dispatcher/dsinit.c b/drivers/acpi/dispatcher/dsinit.c index 610b1ee102b0..949f7c75029e 100644 --- a/drivers/acpi/dispatcher/dsinit.c +++ b/drivers/acpi/dispatcher/dsinit.c @@ -151,7 +151,7 @@ acpi_ds_init_one_object(acpi_handle obj_handle, ******************************************************************************/ acpi_status -acpi_ds_initialize_objects(acpi_native_uint table_index, +acpi_ds_initialize_objects(u32 table_index, struct acpi_namespace_node * start_node) { acpi_status status; diff --git a/drivers/acpi/dispatcher/dsopcode.c b/drivers/acpi/dispatcher/dsopcode.c index a818e0ddb996..ac0bfb1b16fe 100644 --- a/drivers/acpi/dispatcher/dsopcode.c +++ b/drivers/acpi/dispatcher/dsopcode.c @@ -848,7 +848,7 @@ acpi_ds_eval_table_region_operands(struct acpi_walk_state *walk_state, union acpi_operand_object **operand; struct acpi_namespace_node *node; union acpi_parse_object *next_op; - acpi_native_uint table_index; + u32 table_index; struct acpi_table_header *table; ACPI_FUNCTION_TRACE_PTR(ds_eval_table_region_operands, op); diff --git a/drivers/acpi/dispatcher/dswstate.c b/drivers/acpi/dispatcher/dswstate.c index bda23ed60645..b00d4af791aa 100644 --- a/drivers/acpi/dispatcher/dswstate.c +++ b/drivers/acpi/dispatcher/dswstate.c @@ -70,7 +70,7 @@ acpi_status acpi_ds_result_pop(union acpi_operand_object **object, struct acpi_walk_state *walk_state) { - acpi_native_uint index; + u32 index; union acpi_generic_state *state; acpi_status status; @@ -122,7 +122,7 @@ acpi_ds_result_pop(union acpi_operand_object **object, ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Obj=%p [%s] Index=%X State=%p Num=%X\n", *object, acpi_ut_get_object_type_name(*object), - (u32) index, walk_state, walk_state->result_count)); + index, walk_state, walk_state->result_count)); return (AE_OK); } @@ -146,7 +146,7 @@ acpi_ds_result_push(union acpi_operand_object * object, { union acpi_generic_state *state; acpi_status status; - acpi_native_uint index; + u32 index; ACPI_FUNCTION_NAME(ds_result_push); @@ -400,7 +400,7 @@ void acpi_ds_obj_stack_pop_and_delete(u32 pop_count, struct acpi_walk_state *walk_state) { - acpi_native_int i; + s32 i; union acpi_operand_object *obj_desc; ACPI_FUNCTION_NAME(ds_obj_stack_pop_and_delete); @@ -409,7 +409,7 @@ acpi_ds_obj_stack_pop_and_delete(u32 pop_count, return; } - for (i = (acpi_native_int) (pop_count - 1); i >= 0; i--) { + for (i = (s32) pop_count - 1; i >= 0; i--) { if (walk_state->num_operands == 0) { return; } diff --git a/drivers/acpi/events/evevent.c b/drivers/acpi/events/evevent.c index 5d30e5be1b1c..c56c5c6ea77b 100644 --- a/drivers/acpi/events/evevent.c +++ b/drivers/acpi/events/evevent.c @@ -188,7 +188,7 @@ acpi_status acpi_ev_install_xrupt_handlers(void) static acpi_status acpi_ev_fixed_event_initialize(void) { - acpi_native_uint i; + u32 i; acpi_status status; /* @@ -231,7 +231,7 @@ u32 acpi_ev_fixed_event_detect(void) u32 int_status = ACPI_INTERRUPT_NOT_HANDLED; u32 fixed_status; u32 fixed_enable; - acpi_native_uint i; + u32 i; ACPI_FUNCTION_NAME(ev_fixed_event_detect); @@ -260,7 +260,7 @@ u32 acpi_ev_fixed_event_detect(void) /* Found an active (signalled) event */ acpi_os_fixed_event_count(i); - int_status |= acpi_ev_fixed_event_dispatch((u32) i); + int_status |= acpi_ev_fixed_event_dispatch(i); } } diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c index ca356e5ae2c3..c5e53aae86f7 100644 --- a/drivers/acpi/events/evgpe.c +++ b/drivers/acpi/events/evgpe.c @@ -315,7 +315,7 @@ struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device, { union acpi_operand_object *obj_desc; struct acpi_gpe_block_info *gpe_block; - acpi_native_uint i; + u32 i; ACPI_FUNCTION_ENTRY(); @@ -389,8 +389,8 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list) u32 status_reg; u32 enable_reg; acpi_cpu_flags flags; - acpi_native_uint i; - acpi_native_uint j; + u32 i; + u32 j; ACPI_FUNCTION_NAME(ev_gpe_detect); @@ -472,13 +472,7 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list) */ int_status |= acpi_ev_gpe_dispatch(&gpe_block-> - event_info[(i * - ACPI_GPE_REGISTER_WIDTH) - + - j], - (u32) j + - gpe_register_info-> - base_gpe_number); + event_info[((acpi_size) i * ACPI_GPE_REGISTER_WIDTH) + j], j + gpe_register_info->base_gpe_number); } } } diff --git a/drivers/acpi/events/evgpeblk.c b/drivers/acpi/events/evgpeblk.c index e6c4d4c49e79..73c058e2f5c2 100644 --- a/drivers/acpi/events/evgpeblk.c +++ b/drivers/acpi/events/evgpeblk.c @@ -189,8 +189,8 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, struct acpi_gpe_block_info *gpe_block) { struct acpi_gpe_event_info *gpe_event_info; - acpi_native_uint i; - acpi_native_uint j; + u32 i; + u32 j; ACPI_FUNCTION_TRACE(ev_delete_gpe_handlers); @@ -203,7 +203,8 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info, for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) { gpe_event_info = &gpe_block-> - event_info[(i * ACPI_GPE_REGISTER_WIDTH) + j]; + event_info[((acpi_size) i * + ACPI_GPE_REGISTER_WIDTH) + j]; if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == ACPI_GPE_DISPATCH_HANDLER) { @@ -744,8 +745,8 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block) struct acpi_gpe_event_info *gpe_event_info = NULL; struct acpi_gpe_event_info *this_event; struct acpi_gpe_register_info *this_register; - acpi_native_uint i; - acpi_native_uint j; + u32 i; + u32 j; acpi_status status; ACPI_FUNCTION_TRACE(ev_create_gpe_info_blocks); @@ -983,8 +984,8 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, struct acpi_gpe_walk_info gpe_info; u32 wake_gpe_count; u32 gpe_enabled_count; - acpi_native_uint i; - acpi_native_uint j; + u32 i; + u32 j; ACPI_FUNCTION_TRACE(ev_initialize_gpe_block); @@ -1033,7 +1034,8 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, gpe_event_info = &gpe_block-> - event_info[(i * ACPI_GPE_REGISTER_WIDTH) + j]; + event_info[((acpi_size) i * + ACPI_GPE_REGISTER_WIDTH) + j]; if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) == ACPI_GPE_DISPATCH_METHOD) diff --git a/drivers/acpi/events/evmisc.c b/drivers/acpi/events/evmisc.c index 2113e58e2221..1d5670be729a 100644 --- a/drivers/acpi/events/evmisc.c +++ b/drivers/acpi/events/evmisc.c @@ -575,7 +575,7 @@ acpi_status acpi_ev_release_global_lock(void) void acpi_ev_terminate(void) { - acpi_native_uint i; + u32 i; acpi_status status; ACPI_FUNCTION_TRACE(ev_terminate); @@ -589,7 +589,7 @@ void acpi_ev_terminate(void) /* Disable all fixed events */ for (i = 0; i < ACPI_NUM_FIXED_EVENTS; i++) { - status = acpi_disable_event((u32) i, 0); + status = acpi_disable_event(i, 0); if (ACPI_FAILURE(status)) { ACPI_ERROR((AE_INFO, "Could not disable fixed event %d", diff --git a/drivers/acpi/events/evregion.c b/drivers/acpi/events/evregion.c index 5ab4c01417df..236fbd1ca438 100644 --- a/drivers/acpi/events/evregion.c +++ b/drivers/acpi/events/evregion.c @@ -81,7 +81,7 @@ acpi_ev_install_handler(acpi_handle obj_handle, acpi_status acpi_ev_install_region_handlers(void) { acpi_status status; - acpi_native_uint i; + u32 i; ACPI_FUNCTION_TRACE(ev_install_region_handlers); @@ -151,7 +151,7 @@ acpi_status acpi_ev_install_region_handlers(void) acpi_status acpi_ev_initialize_op_regions(void) { acpi_status status; - acpi_native_uint i; + u32 i; ACPI_FUNCTION_TRACE(ev_initialize_op_regions); diff --git a/drivers/acpi/events/evrgnini.c b/drivers/acpi/events/evrgnini.c index 2e3d2c5e4f4d..6b94b38df07d 100644 --- a/drivers/acpi/events/evrgnini.c +++ b/drivers/acpi/events/evrgnini.c @@ -380,7 +380,7 @@ static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node) acpi_status status; struct acpica_device_id hid; struct acpi_compatible_id_list *cid; - acpi_native_uint i; + u32 i; /* * Get the _HID and check for a PCI Root Bridge diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c index 39d742190584..2a32c843cb4a 100644 --- a/drivers/acpi/executer/exconfig.c +++ b/drivers/acpi/executer/exconfig.c @@ -53,7 +53,7 @@ ACPI_MODULE_NAME("exconfig") /* Local prototypes */ static acpi_status -acpi_ex_add_table(acpi_native_uint table_index, +acpi_ex_add_table(u32 table_index, struct acpi_namespace_node *parent_node, union acpi_operand_object **ddb_handle); @@ -73,7 +73,7 @@ acpi_ex_add_table(acpi_native_uint table_index, ******************************************************************************/ static acpi_status -acpi_ex_add_table(acpi_native_uint table_index, +acpi_ex_add_table(u32 table_index, struct acpi_namespace_node *parent_node, union acpi_operand_object **ddb_handle) { @@ -96,7 +96,8 @@ acpi_ex_add_table(acpi_native_uint table_index, /* Install the new table into the local data structures */ - obj_desc->reference.object = ACPI_CAST_PTR(void, table_index); + obj_desc->reference.object = ACPI_CAST_PTR(void, + (unsigned long)table_index); /* Add the table to the namespace */ @@ -128,12 +129,12 @@ acpi_ex_load_table_op(struct acpi_walk_state *walk_state, { acpi_status status; union acpi_operand_object **operand = &walk_state->operands[0]; - acpi_native_uint table_index; struct acpi_namespace_node *parent_node; struct acpi_namespace_node *start_node; struct acpi_namespace_node *parameter_node = NULL; union acpi_operand_object *ddb_handle; struct acpi_table_header *table; + u32 table_index; ACPI_FUNCTION_TRACE(ex_load_table_op); @@ -280,7 +281,7 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc, { union acpi_operand_object *ddb_handle; struct acpi_table_desc table_desc; - acpi_native_uint table_index; + u32 table_index; acpi_status status; u32 length; @@ -437,7 +438,7 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle) { acpi_status status = AE_OK; union acpi_operand_object *table_desc = ddb_handle; - acpi_native_uint table_index; + u32 table_index; struct acpi_table_header *table; ACPI_FUNCTION_TRACE(ex_unload_table); @@ -454,9 +455,9 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle) return_ACPI_STATUS(AE_BAD_PARAMETER); } - /* Get the table index from the ddb_handle */ + /* Get the table index from the ddb_handle (acpi_size for 64-bit case) */ - table_index = (acpi_native_uint) table_desc->reference.object; + table_index = (u32) (acpi_size) table_desc->reference.object; /* Invoke table handler if present */ diff --git a/drivers/acpi/executer/exconvrt.c b/drivers/acpi/executer/exconvrt.c index fd954b4ed83d..261d97516d9b 100644 --- a/drivers/acpi/executer/exconvrt.c +++ b/drivers/acpi/executer/exconvrt.c @@ -288,11 +288,11 @@ acpi_ex_convert_to_ascii(acpi_integer integer, u16 base, u8 * string, u8 data_width) { acpi_integer digit; - acpi_native_uint i; - acpi_native_uint j; - acpi_native_uint k = 0; - acpi_native_uint hex_length; - acpi_native_uint decimal_length; + u32 i; + u32 j; + u32 k = 0; + u32 hex_length; + u32 decimal_length; u32 remainder; u8 supress_zeros; @@ -348,7 +348,7 @@ acpi_ex_convert_to_ascii(acpi_integer integer, /* hex_length: 2 ascii hex chars per data byte */ - hex_length = (acpi_native_uint) ACPI_MUL_2(data_width); + hex_length = ACPI_MUL_2(data_width); for (i = 0, j = (hex_length - 1); i < hex_length; i++, j--) { /* Get one hex digit, most significant digits first */ diff --git a/drivers/acpi/executer/exdump.c b/drivers/acpi/executer/exdump.c index 74f1b22601b3..976016fda66a 100644 --- a/drivers/acpi/executer/exdump.c +++ b/drivers/acpi/executer/exdump.c @@ -775,7 +775,7 @@ acpi_ex_dump_operands(union acpi_operand_object **operands, u32 num_levels, char *note, char *module_name, u32 line_number) { - acpi_native_uint i; + u32 i; ACPI_FUNCTION_NAME(ex_dump_operands); diff --git a/drivers/acpi/executer/exfldio.c b/drivers/acpi/executer/exfldio.c index e336b5dc7a50..9ff9d1f4615d 100644 --- a/drivers/acpi/executer/exfldio.c +++ b/drivers/acpi/executer/exfldio.c @@ -153,14 +153,15 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, /* * Slack mode only: We will go ahead and allow access to this * field if it is within the region length rounded up to the next - * access width boundary. + * access width boundary. acpi_size cast for 64-bit compile. */ if (ACPI_ROUND_UP(rgn_desc->region.length, obj_desc->common_field. access_byte_width) >= - (obj_desc->common_field.base_byte_offset + - (acpi_native_uint) obj_desc->common_field. - access_byte_width + field_datum_byte_offset)) { + ((acpi_size) obj_desc->common_field. + base_byte_offset + + obj_desc->common_field.access_byte_width + + field_datum_byte_offset)) { return_ACPI_STATUS(AE_OK); } } diff --git a/drivers/acpi/executer/exmisc.c b/drivers/acpi/executer/exmisc.c index cc956a5b5267..731414a581a6 100644 --- a/drivers/acpi/executer/exmisc.c +++ b/drivers/acpi/executer/exmisc.c @@ -329,8 +329,8 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0, /* Result of two Strings is a String */ - return_desc = acpi_ut_create_string_object((acpi_size) - (operand0->string. + return_desc = acpi_ut_create_string_object(((acpi_size) + operand0->string. length + local_operand1-> string.length)); @@ -352,8 +352,8 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0, /* Result of two Buffers is a Buffer */ - return_desc = acpi_ut_create_buffer_object((acpi_size) - (operand0->buffer. + return_desc = acpi_ut_create_buffer_object(((acpi_size) + operand0->buffer. length + local_operand1-> buffer.length)); diff --git a/drivers/acpi/executer/exregion.c b/drivers/acpi/executer/exregion.c index 7cd8bb54fa01..7a41c409ae4d 100644 --- a/drivers/acpi/executer/exregion.c +++ b/drivers/acpi/executer/exregion.c @@ -156,7 +156,7 @@ acpi_ex_system_memory_space_handler(u32 function, /* Create a new mapping starting at the address given */ mem_info->mapped_logical_address = - acpi_os_map_memory((acpi_native_uint) address, window_size); + acpi_os_map_memory((acpi_physical_address) address, window_size); if (!mem_info->mapped_logical_address) { ACPI_ERROR((AE_INFO, "Could not map memory at %8.8X%8.8X, size %X", diff --git a/drivers/acpi/namespace/nsdump.c b/drivers/acpi/namespace/nsdump.c index 5445751b8a3e..904f9510c0e2 100644 --- a/drivers/acpi/namespace/nsdump.c +++ b/drivers/acpi/namespace/nsdump.c @@ -73,7 +73,7 @@ acpi_ns_dump_one_device(acpi_handle obj_handle, void acpi_ns_print_pathname(u32 num_segments, char *pathname) { - acpi_native_uint i; + u32 i; ACPI_FUNCTION_NAME(ns_print_pathname); diff --git a/drivers/acpi/namespace/nsload.c b/drivers/acpi/namespace/nsload.c index 2c92f6cf5ce1..a4a412b7c029 100644 --- a/drivers/acpi/namespace/nsload.c +++ b/drivers/acpi/namespace/nsload.c @@ -71,8 +71,7 @@ static acpi_status acpi_ns_delete_subtree(acpi_handle start_handle); ******************************************************************************/ acpi_status -acpi_ns_load_table(acpi_native_uint table_index, - struct acpi_namespace_node *node) +acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node) { acpi_status status; diff --git a/drivers/acpi/namespace/nsparse.c b/drivers/acpi/namespace/nsparse.c index 46a79b0103b6..a82271a9dbb3 100644 --- a/drivers/acpi/namespace/nsparse.c +++ b/drivers/acpi/namespace/nsparse.c @@ -63,13 +63,13 @@ ACPI_MODULE_NAME("nsparse") * ******************************************************************************/ acpi_status -acpi_ns_one_complete_parse(acpi_native_uint pass_number, - acpi_native_uint table_index, - struct acpi_namespace_node * start_node) +acpi_ns_one_complete_parse(u32 pass_number, + u32 table_index, + struct acpi_namespace_node *start_node) { union acpi_parse_object *parse_root; acpi_status status; - acpi_native_uint aml_length; + u32 aml_length; u8 *aml_start; struct acpi_walk_state *walk_state; struct acpi_table_header *table; @@ -112,8 +112,8 @@ acpi_ns_one_complete_parse(acpi_native_uint pass_number, aml_start = (u8 *) table + sizeof(struct acpi_table_header); aml_length = table->length - sizeof(struct acpi_table_header); status = acpi_ds_init_aml_walk(walk_state, parse_root, NULL, - aml_start, (u32) aml_length, - NULL, (u8) pass_number); + aml_start, aml_length, NULL, + (u8) pass_number); } if (ACPI_FAILURE(status)) { @@ -158,8 +158,7 @@ acpi_ns_one_complete_parse(acpi_native_uint pass_number, ******************************************************************************/ acpi_status -acpi_ns_parse_table(acpi_native_uint table_index, - struct acpi_namespace_node *start_node) +acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node) { acpi_status status; diff --git a/drivers/acpi/namespace/nsutils.c b/drivers/acpi/namespace/nsutils.c index 64c039843ed2..5b5619c54594 100644 --- a/drivers/acpi/namespace/nsutils.c +++ b/drivers/acpi/namespace/nsutils.c @@ -365,7 +365,7 @@ acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info) char *internal_name = info->internal_name; char *external_name = info->next_external_char; char *result = NULL; - acpi_native_uint i; + u32 i; ACPI_FUNCTION_TRACE(ns_build_internal_name); @@ -400,12 +400,11 @@ acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info) result = &internal_name[i]; } else if (num_segments == 2) { internal_name[i] = AML_DUAL_NAME_PREFIX; - result = &internal_name[(acpi_native_uint) (i + 1)]; + result = &internal_name[(acpi_size) i + 1]; } else { internal_name[i] = AML_MULTI_NAME_PREFIX_OP; - internal_name[(acpi_native_uint) (i + 1)] = - (char)num_segments; - result = &internal_name[(acpi_native_uint) (i + 2)]; + internal_name[(acpi_size) i + 1] = (char)num_segments; + result = &internal_name[(acpi_size) i + 2]; } } @@ -531,12 +530,12 @@ acpi_ns_externalize_name(u32 internal_name_length, char *internal_name, u32 * converted_name_length, char **converted_name) { - acpi_native_uint names_index = 0; - acpi_native_uint num_segments = 0; - acpi_native_uint required_length; - acpi_native_uint prefix_length = 0; - acpi_native_uint i = 0; - acpi_native_uint j = 0; + u32 names_index = 0; + u32 num_segments = 0; + u32 required_length; + u32 prefix_length = 0; + u32 i = 0; + u32 j = 0; ACPI_FUNCTION_TRACE(ns_externalize_name); @@ -582,9 +581,8 @@ acpi_ns_externalize_name(u32 internal_name_length, /* 4-byte names */ names_index = prefix_length + 2; - num_segments = (acpi_native_uint) (u8) - internal_name[(acpi_native_uint) - (prefix_length + 1)]; + num_segments = (u8) + internal_name[(acpi_size) prefix_length + 1]; break; case AML_DUAL_NAME_PREFIX: diff --git a/drivers/acpi/namespace/nsxfeval.c b/drivers/acpi/namespace/nsxfeval.c index b4e135eab7c7..38be5865d95d 100644 --- a/drivers/acpi/namespace/nsxfeval.c +++ b/drivers/acpi/namespace/nsxfeval.c @@ -441,7 +441,7 @@ acpi_ns_get_device_callback(acpi_handle obj_handle, u32 flags; struct acpica_device_id hid; struct acpi_compatible_id_list *cid; - acpi_native_uint i; + u32 i; int found; status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); diff --git a/drivers/acpi/parser/psargs.c b/drivers/acpi/parser/psargs.c index e94463778845..d830b29b85b1 100644 --- a/drivers/acpi/parser/psargs.c +++ b/drivers/acpi/parser/psargs.c @@ -76,7 +76,7 @@ acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state) { u8 *aml = parser_state->aml; u32 package_length = 0; - acpi_native_uint byte_count; + u32 byte_count; u8 byte_zero_mask = 0x3F; /* Default [0:5] */ ACPI_FUNCTION_TRACE(ps_get_next_package_length); @@ -86,7 +86,7 @@ acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state) * used to encode the package length, either 0,1,2, or 3 */ byte_count = (aml[0] >> 6); - parser_state->aml += (byte_count + 1); + parser_state->aml += ((acpi_size) byte_count + 1); /* Get bytes 3, 2, 1 as needed */ diff --git a/drivers/acpi/parser/psxface.c b/drivers/acpi/parser/psxface.c index 5ee09e1245e3..270469aae842 100644 --- a/drivers/acpi/parser/psxface.c +++ b/drivers/acpi/parser/psxface.c @@ -333,7 +333,7 @@ acpi_status acpi_ps_execute_method(struct acpi_evaluate_info *info) static void acpi_ps_update_parameter_list(struct acpi_evaluate_info *info, u16 action) { - acpi_native_uint i; + u32 i; if (info->parameters) { diff --git a/drivers/acpi/resources/rscalc.c b/drivers/acpi/resources/rscalc.c index 8a112d11d491..f61ebc679e66 100644 --- a/drivers/acpi/resources/rscalc.c +++ b/drivers/acpi/resources/rscalc.c @@ -73,7 +73,7 @@ acpi_rs_stream_option_length(u32 resource_length, u32 minimum_total_length); static u8 acpi_rs_count_set_bits(u16 bit_field) { - acpi_native_uint bits_set; + u8 bits_set; ACPI_FUNCTION_ENTRY(); @@ -84,7 +84,7 @@ static u8 acpi_rs_count_set_bits(u16 bit_field) bit_field &= (u16) (bit_field - 1); } - return ((u8) bits_set); + return bits_set; } /******************************************************************************* diff --git a/drivers/acpi/resources/rsmisc.c b/drivers/acpi/resources/rsmisc.c index de1ac3881b22..96a6c0353255 100644 --- a/drivers/acpi/resources/rsmisc.c +++ b/drivers/acpi/resources/rsmisc.c @@ -82,7 +82,7 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, ACPI_FUNCTION_TRACE(rs_convert_aml_to_resource); - if (((acpi_native_uint) resource) & 0x3) { + if (((acpi_size) resource) & 0x3) { /* Each internal resource struct is expected to be 32-bit aligned */ diff --git a/drivers/acpi/resources/rsutils.c b/drivers/acpi/resources/rsutils.c index 90ed83d05375..f7b3bcd59ba7 100644 --- a/drivers/acpi/resources/rsutils.c +++ b/drivers/acpi/resources/rsutils.c @@ -62,7 +62,7 @@ ACPI_MODULE_NAME("rsutils") ******************************************************************************/ u8 acpi_rs_decode_bitmask(u16 mask, u8 * list) { - acpi_native_uint i; + u8 i; u8 bit_count; ACPI_FUNCTION_ENTRY(); @@ -71,7 +71,7 @@ u8 acpi_rs_decode_bitmask(u16 mask, u8 * list) for (i = 0, bit_count = 0; mask; i++) { if (mask & 0x0001) { - list[bit_count] = (u8) i; + list[bit_count] = i; bit_count++; } @@ -96,8 +96,8 @@ u8 acpi_rs_decode_bitmask(u16 mask, u8 * list) u16 acpi_rs_encode_bitmask(u8 * list, u8 count) { - acpi_native_uint i; - acpi_native_uint mask; + u32 i; + u16 mask; ACPI_FUNCTION_ENTRY(); @@ -107,7 +107,7 @@ u16 acpi_rs_encode_bitmask(u8 * list, u8 count) mask |= (0x1 << list[i]); } - return ((u16) mask); + return mask; } /******************************************************************************* @@ -130,7 +130,7 @@ u16 acpi_rs_encode_bitmask(u8 * list, u8 count) void acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type) { - acpi_native_uint i; + u32 i; ACPI_FUNCTION_ENTRY(); diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c index 949d4114eb9f..a4a41ba2484b 100644 --- a/drivers/acpi/tables/tbfadt.c +++ b/drivers/acpi/tables/tbfadt.c @@ -155,7 +155,7 @@ acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, * ******************************************************************************/ -void acpi_tb_parse_fadt(acpi_native_uint table_index, u8 flags) +void acpi_tb_parse_fadt(u32 table_index, u8 flags) { u32 length; struct acpi_table_header *table; @@ -280,7 +280,7 @@ static void acpi_tb_convert_fadt(void) { u8 pm1_register_length; struct acpi_generic_address *target; - acpi_native_uint i; + u32 i; /* Update the local FADT table header length */ @@ -396,7 +396,7 @@ static void acpi_tb_validate_fadt(void) u32 *address32; struct acpi_generic_address *address64; u8 length; - acpi_native_uint i; + u32 i; /* Examine all of the 64-bit extended address fields (X fields) */ diff --git a/drivers/acpi/tables/tbfind.c b/drivers/acpi/tables/tbfind.c index 9ca3afc98c80..531584defbb8 100644 --- a/drivers/acpi/tables/tbfind.c +++ b/drivers/acpi/tables/tbfind.c @@ -65,10 +65,9 @@ ACPI_MODULE_NAME("tbfind") ******************************************************************************/ acpi_status acpi_tb_find_table(char *signature, - char *oem_id, - char *oem_table_id, acpi_native_uint * table_index) + char *oem_id, char *oem_table_id, u32 *table_index) { - acpi_native_uint i; + u32 i; acpi_status status; struct acpi_table_header header; diff --git a/drivers/acpi/tables/tbinstal.c b/drivers/acpi/tables/tbinstal.c index 5336ce88f89f..b22185f55a16 100644 --- a/drivers/acpi/tables/tbinstal.c +++ b/drivers/acpi/tables/tbinstal.c @@ -107,11 +107,10 @@ acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc) ******************************************************************************/ acpi_status -acpi_tb_add_table(struct acpi_table_desc *table_desc, - acpi_native_uint * table_index) +acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index) { - acpi_native_uint i; - acpi_native_uint length; + u32 i; + u32 length; acpi_status status = AE_OK; ACPI_FUNCTION_TRACE(tb_add_table); @@ -207,8 +206,8 @@ acpi_status acpi_tb_resize_root_table_list(void) /* Increase the Table Array size */ - tables = ACPI_ALLOCATE_ZEROED((acpi_gbl_root_table_list.size + - ACPI_ROOT_TABLE_SIZE_INCREMENT) + tables = ACPI_ALLOCATE_ZEROED(((acpi_size) acpi_gbl_root_table_list. + size + ACPI_ROOT_TABLE_SIZE_INCREMENT) * sizeof(struct acpi_table_desc)); if (!tables) { ACPI_ERROR((AE_INFO, @@ -220,7 +219,7 @@ acpi_status acpi_tb_resize_root_table_list(void) if (acpi_gbl_root_table_list.tables) { ACPI_MEMCPY(tables, acpi_gbl_root_table_list.tables, - acpi_gbl_root_table_list.size * + (acpi_size) acpi_gbl_root_table_list.size * sizeof(struct acpi_table_desc)); if (acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) { @@ -253,7 +252,7 @@ acpi_status acpi_tb_resize_root_table_list(void) acpi_status acpi_tb_store_table(acpi_physical_address address, struct acpi_table_header *table, - u32 length, u8 flags, acpi_native_uint * table_index) + u32 length, u8 flags, u32 *table_index) { acpi_status status = AE_OK; @@ -334,7 +333,7 @@ void acpi_tb_delete_table(struct acpi_table_desc *table_desc) void acpi_tb_terminate(void) { - acpi_native_uint i; + u32 i; ACPI_FUNCTION_TRACE(tb_terminate); @@ -374,7 +373,7 @@ void acpi_tb_terminate(void) * ******************************************************************************/ -void acpi_tb_delete_namespace_by_owner(acpi_native_uint table_index) +void acpi_tb_delete_namespace_by_owner(u32 table_index) { acpi_owner_id owner_id; @@ -403,7 +402,7 @@ void acpi_tb_delete_namespace_by_owner(acpi_native_uint table_index) * ******************************************************************************/ -acpi_status acpi_tb_allocate_owner_id(acpi_native_uint table_index) +acpi_status acpi_tb_allocate_owner_id(u32 table_index) { acpi_status status = AE_BAD_PARAMETER; @@ -431,7 +430,7 @@ acpi_status acpi_tb_allocate_owner_id(acpi_native_uint table_index) * ******************************************************************************/ -acpi_status acpi_tb_release_owner_id(acpi_native_uint table_index) +acpi_status acpi_tb_release_owner_id(u32 table_index) { acpi_status status = AE_BAD_PARAMETER; @@ -462,8 +461,7 @@ acpi_status acpi_tb_release_owner_id(acpi_native_uint table_index) * ******************************************************************************/ -acpi_status -acpi_tb_get_owner_id(acpi_native_uint table_index, acpi_owner_id * owner_id) +acpi_status acpi_tb_get_owner_id(u32 table_index, acpi_owner_id *owner_id) { acpi_status status = AE_BAD_PARAMETER; @@ -490,7 +488,7 @@ acpi_tb_get_owner_id(acpi_native_uint table_index, acpi_owner_id * owner_id) * ******************************************************************************/ -u8 acpi_tb_is_table_loaded(acpi_native_uint table_index) +u8 acpi_tb_is_table_loaded(u32 table_index) { u8 is_loaded = FALSE; @@ -518,7 +516,7 @@ u8 acpi_tb_is_table_loaded(acpi_native_uint table_index) * ******************************************************************************/ -void acpi_tb_set_table_loaded_flag(acpi_native_uint table_index, u8 is_loaded) +void acpi_tb_set_table_loaded_flag(u32 table_index, u8 is_loaded) { (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); diff --git a/drivers/acpi/tables/tbutils.c b/drivers/acpi/tables/tbutils.c index bc019b9b6a68..0cc92ef5236f 100644 --- a/drivers/acpi/tables/tbutils.c +++ b/drivers/acpi/tables/tbutils.c @@ -49,8 +49,8 @@ ACPI_MODULE_NAME("tbutils") /* Local prototypes */ static acpi_physical_address -acpi_tb_get_root_table_entry(u8 * table_entry, - acpi_native_uint table_entry_size); +acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size); + /******************************************************************************* * * FUNCTION: acpi_tb_check_xsdt @@ -238,7 +238,7 @@ acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length) * ******************************************************************************/ -u8 acpi_tb_checksum(u8 * buffer, acpi_native_uint length) +u8 acpi_tb_checksum(u8 *buffer, u32 length) { u8 sum = 0; u8 *end = buffer + length; @@ -268,7 +268,7 @@ u8 acpi_tb_checksum(u8 * buffer, acpi_native_uint length) void acpi_tb_install_table(acpi_physical_address address, - u8 flags, char *signature, acpi_native_uint table_index) + u8 flags, char *signature, u32 table_index) { struct acpi_table_header *table; @@ -336,8 +336,7 @@ acpi_tb_install_table(acpi_physical_address address, ******************************************************************************/ static acpi_physical_address -acpi_tb_get_root_table_entry(u8 * table_entry, - acpi_native_uint table_entry_size) +acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size) { u64 address64; @@ -395,8 +394,8 @@ acpi_status __init acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags) { struct acpi_table_rsdp *rsdp; - acpi_native_uint table_entry_size; - acpi_native_uint i; + u32 table_entry_size; + u32 i; u32 table_count; struct acpi_table_header *table; acpi_physical_address address; diff --git a/drivers/acpi/tables/tbxface.c b/drivers/acpi/tables/tbxface.c index 0e319604d3e7..fd7770aa1061 100644 --- a/drivers/acpi/tables/tbxface.c +++ b/drivers/acpi/tables/tbxface.c @@ -125,7 +125,7 @@ acpi_initialize_tables(struct acpi_table_desc * initial_table_array, /* Root Table Array has been statically allocated by the host */ ACPI_MEMSET(initial_table_array, 0, - initial_table_count * + (acpi_size) initial_table_count * sizeof(struct acpi_table_desc)); acpi_gbl_root_table_list.tables = initial_table_array; @@ -183,9 +183,9 @@ acpi_status acpi_reallocate_root_table(void) return_ACPI_STATUS(AE_SUPPORT); } - new_size = - (acpi_gbl_root_table_list.count + - ACPI_ROOT_TABLE_SIZE_INCREMENT) * sizeof(struct acpi_table_desc); + new_size = ((acpi_size) acpi_gbl_root_table_list.count + + ACPI_ROOT_TABLE_SIZE_INCREMENT) * + sizeof(struct acpi_table_desc); /* Create new array and copy the old array */ @@ -222,7 +222,7 @@ acpi_status acpi_reallocate_root_table(void) acpi_status acpi_load_table(struct acpi_table_header *table_ptr) { acpi_status status; - acpi_native_uint table_index; + u32 table_index; struct acpi_table_desc table_desc; if (!table_ptr) @@ -264,11 +264,10 @@ ACPI_EXPORT_SYMBOL(acpi_load_table) *****************************************************************************/ acpi_status acpi_get_table_header(char *signature, - acpi_native_uint instance, - struct acpi_table_header * out_table_header) + u32 instance, struct acpi_table_header *out_table_header) { - acpi_native_uint i; - acpi_native_uint j; + u32 i; + u32 j; struct acpi_table_header *header; /* Parameter validation */ @@ -378,10 +377,10 @@ ACPI_EXPORT_SYMBOL(acpi_unload_table_id) *****************************************************************************/ acpi_status acpi_get_table(char *signature, - acpi_native_uint instance, struct acpi_table_header **out_table) + u32 instance, struct acpi_table_header **out_table) { - acpi_native_uint i; - acpi_native_uint j; + u32 i; + u32 j; acpi_status status; /* Parameter validation */ @@ -435,8 +434,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_table) * ******************************************************************************/ acpi_status -acpi_get_table_by_index(acpi_native_uint table_index, - struct acpi_table_header ** table) +acpi_get_table_by_index(u32 table_index, struct acpi_table_header **table) { acpi_status status; @@ -493,7 +491,7 @@ static acpi_status acpi_tb_load_namespace(void) { acpi_status status; struct acpi_table_header *table; - acpi_native_uint i; + u32 i; ACPI_FUNCTION_TRACE(tb_load_namespace); diff --git a/drivers/acpi/tables/tbxfroot.c b/drivers/acpi/tables/tbxfroot.c index b8c0dfa084f6..2d157e0f98d2 100644 --- a/drivers/acpi/tables/tbxfroot.c +++ b/drivers/acpi/tables/tbxfroot.c @@ -118,7 +118,7 @@ static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp) * ******************************************************************************/ -acpi_status acpi_find_root_pointer(acpi_native_uint * table_address) +acpi_status acpi_find_root_pointer(acpi_size *table_address) { u8 *table_ptr; u8 *mem_rover; @@ -153,7 +153,7 @@ acpi_status acpi_find_root_pointer(acpi_native_uint * table_address) * 1b) Search EBDA paragraphs (EBDA is required to be a * minimum of 1_k length) */ - table_ptr = acpi_os_map_memory((acpi_native_uint) + table_ptr = acpi_os_map_memory((acpi_physical_address) physical_address, ACPI_EBDA_WINDOW_SIZE); if (!table_ptr) { diff --git a/drivers/acpi/utilities/utcopy.c b/drivers/acpi/utilities/utcopy.c index 655c290aca7b..53499ac90988 100644 --- a/drivers/acpi/utilities/utcopy.c +++ b/drivers/acpi/utilities/utcopy.c @@ -572,7 +572,7 @@ acpi_ut_copy_epackage_to_ipackage(union acpi_object *external_object, acpi_status status = AE_OK; union acpi_operand_object *package_object; union acpi_operand_object **package_elements; - acpi_native_uint i; + u32 i; ACPI_FUNCTION_TRACE(ut_copy_epackage_to_ipackage); @@ -599,7 +599,7 @@ acpi_ut_copy_epackage_to_ipackage(union acpi_object *external_object, /* Truncate package and delete it */ - package_object->package.count = (u32) i; + package_object->package.count = i; package_elements[i] = NULL; acpi_ut_remove_reference(package_object); return_ACPI_STATUS(status); diff --git a/drivers/acpi/utilities/utdebug.c b/drivers/acpi/utilities/utdebug.c index f938f465efa4..3919fe599f94 100644 --- a/drivers/acpi/utilities/utdebug.c +++ b/drivers/acpi/utilities/utdebug.c @@ -519,8 +519,8 @@ acpi_ut_ptr_exit(u32 line_number, void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display) { - acpi_native_uint i = 0; - acpi_native_uint j; + u32 i = 0; + u32 j; u32 temp32; u8 buf_char; @@ -539,7 +539,7 @@ void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display) /* Print current offset */ - acpi_os_printf("%6.4X: ", (u32) i); + acpi_os_printf("%6.4X: ", i); /* Print 16 hex chars */ @@ -549,7 +549,7 @@ void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display) /* Dump fill spaces */ acpi_os_printf("%*s", ((display * 2) + 1), " "); - j += (acpi_native_uint) display; + j += display; continue; } @@ -557,32 +557,38 @@ void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display) case DB_BYTE_DISPLAY: default: /* Default is BYTE display */ - acpi_os_printf("%02X ", buffer[i + j]); + acpi_os_printf("%02X ", + buffer[(acpi_size) i + j]); break; case DB_WORD_DISPLAY: - ACPI_MOVE_16_TO_32(&temp32, &buffer[i + j]); + ACPI_MOVE_16_TO_32(&temp32, + &buffer[(acpi_size) i + j]); acpi_os_printf("%04X ", temp32); break; case DB_DWORD_DISPLAY: - ACPI_MOVE_32_TO_32(&temp32, &buffer[i + j]); + ACPI_MOVE_32_TO_32(&temp32, + &buffer[(acpi_size) i + j]); acpi_os_printf("%08X ", temp32); break; case DB_QWORD_DISPLAY: - ACPI_MOVE_32_TO_32(&temp32, &buffer[i + j]); + ACPI_MOVE_32_TO_32(&temp32, + &buffer[(acpi_size) i + j]); acpi_os_printf("%08X", temp32); - ACPI_MOVE_32_TO_32(&temp32, &buffer[i + j + 4]); + ACPI_MOVE_32_TO_32(&temp32, + &buffer[(acpi_size) i + j + + 4]); acpi_os_printf("%08X ", temp32); break; } - j += (acpi_native_uint) display; + j += display; } /* @@ -596,7 +602,7 @@ void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display) return; } - buf_char = buffer[i + j]; + buf_char = buffer[(acpi_size) i + j]; if (ACPI_IS_PRINT(buf_char)) { acpi_os_printf("%c", buf_char); } else { diff --git a/drivers/acpi/utilities/utdelete.c b/drivers/acpi/utilities/utdelete.c index 1fbc35139e84..c5c791a575c9 100644 --- a/drivers/acpi/utilities/utdelete.c +++ b/drivers/acpi/utilities/utdelete.c @@ -442,7 +442,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action) union acpi_generic_state *state_list = NULL; union acpi_operand_object *next_object = NULL; union acpi_generic_state *state; - acpi_native_uint i; + u32 i; ACPI_FUNCTION_TRACE_PTR(ut_update_object_reference, object); diff --git a/drivers/acpi/utilities/uteval.c b/drivers/acpi/utilities/uteval.c index 7f1f6341242d..352747e49c7a 100644 --- a/drivers/acpi/utilities/uteval.c +++ b/drivers/acpi/utilities/uteval.c @@ -97,7 +97,7 @@ acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state) acpi_status status; union acpi_operand_object *string_desc; union acpi_operand_object *return_desc; - acpi_native_uint i; + u32 i; ACPI_FUNCTION_TRACE(ut_osi_implementation); @@ -513,7 +513,7 @@ acpi_ut_execute_CID(struct acpi_namespace_node * device_node, u32 count; u32 size; struct acpi_compatible_id_list *cid_list; - acpi_native_uint i; + u32 i; ACPI_FUNCTION_TRACE(ut_execute_CID); diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c index 47354d9b0e56..6175ca5d73bf 100644 --- a/drivers/acpi/utilities/utmisc.c +++ b/drivers/acpi/utilities/utmisc.c @@ -161,9 +161,9 @@ u8 acpi_ut_is_aml_table(struct acpi_table_header *table) acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id) { - acpi_native_uint i; - acpi_native_uint j; - acpi_native_uint k; + u32 i; + u32 j; + u32 k; acpi_status status; ACPI_FUNCTION_TRACE(ut_allocate_owner_id); @@ -269,7 +269,7 @@ void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr) { acpi_owner_id owner_id = *owner_id_ptr; acpi_status status; - acpi_native_uint index; + u32 index; u32 bit; ACPI_FUNCTION_TRACE_U32(ut_release_owner_id, owner_id); @@ -589,7 +589,7 @@ acpi_ut_display_init_pathname(u8 type, * ******************************************************************************/ -u8 acpi_ut_valid_acpi_char(char character, acpi_native_uint position) +u8 acpi_ut_valid_acpi_char(char character, u32 position) { if (!((character >= 'A' && character <= 'Z') || @@ -624,7 +624,7 @@ u8 acpi_ut_valid_acpi_char(char character, acpi_native_uint position) u8 acpi_ut_valid_acpi_name(u32 name) { - acpi_native_uint i; + u32 i; ACPI_FUNCTION_ENTRY(); @@ -653,7 +653,7 @@ u8 acpi_ut_valid_acpi_name(u32 name) acpi_name acpi_ut_repair_name(char *name) { - acpi_native_uint i; + u32 i; char new_name[ACPI_NAME_SIZE]; for (i = 0; i < ACPI_NAME_SIZE; i++) { diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c index e68466de8044..ede6a80837df 100644 --- a/drivers/acpi/utilities/utobject.c +++ b/drivers/acpi/utilities/utobject.c @@ -175,8 +175,8 @@ union acpi_operand_object *acpi_ut_create_package_object(u32 count) * Create the element array. Count+1 allows the array to be null * terminated. */ - package_elements = ACPI_ALLOCATE_ZEROED((acpi_size) - (count + 1) * sizeof(void *)); + package_elements = ACPI_ALLOCATE_ZEROED(((acpi_size) count + + 1) * sizeof(void *)); if (!package_elements) { acpi_ut_remove_reference(package_desc); return_PTR(NULL); diff --git a/include/acpi/acdispat.h b/include/acpi/acdispat.h index 910f018d92c7..21a73a105d0a 100644 --- a/include/acpi/acdispat.h +++ b/include/acpi/acdispat.h @@ -221,7 +221,7 @@ acpi_ds_method_error(acpi_status status, struct acpi_walk_state *walk_state); * dsinit */ acpi_status -acpi_ds_initialize_objects(acpi_native_uint table_index, +acpi_ds_initialize_objects(u32 table_index, struct acpi_namespace_node *start_node); /* diff --git a/include/acpi/acglobal.h b/include/acpi/acglobal.h index 74ad971241db..15dda46b70d1 100644 --- a/include/acpi/acglobal.h +++ b/include/acpi/acglobal.h @@ -140,7 +140,7 @@ ACPI_EXTERN u32 acpi_gbl_trace_flags; */ ACPI_EXTERN struct acpi_internal_rsdt acpi_gbl_root_table_list; ACPI_EXTERN struct acpi_table_fadt acpi_gbl_FADT; -extern acpi_native_uint acpi_gbl_permanent_mmap; +extern u8 acpi_gbl_permanent_mmap; /* These addresses are calculated from FADT address values */ diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h index 5ad6e3992304..d0494ea74b22 100644 --- a/include/acpi/acmacros.h +++ b/include/acpi/acmacros.h @@ -80,12 +80,12 @@ */ #define ACPI_CAST_PTR(t, p) ((t *) (acpi_uintptr_t) (p)) #define ACPI_CAST_INDIRECT_PTR(t, p) ((t **) (acpi_uintptr_t) (p)) -#define ACPI_ADD_PTR(t,a,b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8,(a)) + (acpi_native_uint)(b))) -#define ACPI_PTR_DIFF(a,b) (acpi_native_uint) (ACPI_CAST_PTR (u8,(a)) - ACPI_CAST_PTR (u8,(b))) +#define ACPI_ADD_PTR(t, a, b) ACPI_CAST_PTR (t, (ACPI_CAST_PTR (u8,(a)) + (acpi_size)(b))) +#define ACPI_PTR_DIFF(a, b) (acpi_size) (ACPI_CAST_PTR (u8,(a)) - ACPI_CAST_PTR (u8,(b))) /* Pointer/Integer type conversions */ -#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void,(void *) NULL,(acpi_native_uint) i) +#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void, (void *) NULL, (acpi_size) i) #define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p,(void *) NULL) #define ACPI_OFFSET(d,f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL) #define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i) @@ -296,22 +296,22 @@ struct acpi_integer_overlay { /* * Rounding macros (Power of two boundaries only) */ -#define ACPI_ROUND_DOWN(value,boundary) (((acpi_native_uint)(value)) & \ - (~(((acpi_native_uint) boundary)-1))) +#define ACPI_ROUND_DOWN(value, boundary) (((acpi_size)(value)) & \ + (~(((acpi_size) boundary)-1))) -#define ACPI_ROUND_UP(value,boundary) ((((acpi_native_uint)(value)) + \ - (((acpi_native_uint) boundary)-1)) & \ - (~(((acpi_native_uint) boundary)-1))) +#define ACPI_ROUND_UP(value, boundary) ((((acpi_size)(value)) + \ + (((acpi_size) boundary)-1)) & \ + (~(((acpi_size) boundary)-1))) -/* Note: sizeof(acpi_native_uint) evaluates to either 2, 4, or 8 */ +/* Note: sizeof(acpi_size) evaluates to either 4 or 8 (32- vs 64-bit mode) */ #define ACPI_ROUND_DOWN_TO_32BIT(a) ACPI_ROUND_DOWN(a,4) #define ACPI_ROUND_DOWN_TO_64BIT(a) ACPI_ROUND_DOWN(a,8) -#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a,sizeof(acpi_native_uint)) +#define ACPI_ROUND_DOWN_TO_NATIVE_WORD(a) ACPI_ROUND_DOWN(a,sizeof(acpi_size)) #define ACPI_ROUND_UP_TO_32BIT(a) ACPI_ROUND_UP(a,4) #define ACPI_ROUND_UP_TO_64BIT(a) ACPI_ROUND_UP(a,8) -#define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a,sizeof(acpi_native_uint)) +#define ACPI_ROUND_UP_TO_NATIVE_WORD(a) ACPI_ROUND_UP(a,sizeof(acpi_size)) #define ACPI_ROUND_BITS_UP_TO_BYTES(a) ACPI_DIV_8((a) + 7) #define ACPI_ROUND_BITS_DOWN_TO_BYTES(a) ACPI_DIV_8((a)) @@ -322,7 +322,7 @@ struct acpi_integer_overlay { #define ACPI_ROUND_UP_TO(value,boundary) (((value) + ((boundary)-1)) / (boundary)) -#define ACPI_IS_MISALIGNED(value) (((acpi_native_uint)value) & (sizeof(acpi_native_uint)-1)) +#define ACPI_IS_MISALIGNED(value) (((acpi_size)value) & (sizeof(acpi_size)-1)) /* * Bitmask creation diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h index 713b30903fe5..d622c309002e 100644 --- a/include/acpi/acnamesp.h +++ b/include/acpi/acnamesp.h @@ -86,8 +86,7 @@ acpi_status acpi_ns_initialize_devices(void); acpi_status acpi_ns_load_namespace(void); acpi_status -acpi_ns_load_table(acpi_native_uint table_index, - struct acpi_namespace_node *node); +acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node); /* * nswalk - walk the namespace @@ -108,12 +107,11 @@ struct acpi_namespace_node *acpi_ns_get_next_node(acpi_object_type type, struct * nsparse - table parsing */ acpi_status -acpi_ns_parse_table(acpi_native_uint table_index, - struct acpi_namespace_node *start_node); +acpi_ns_parse_table(u32 table_index, struct acpi_namespace_node *start_node); acpi_status -acpi_ns_one_complete_parse(acpi_native_uint pass_number, - acpi_native_uint table_index, +acpi_ns_one_complete_parse(u32 pass_number, + u32 table_index, struct acpi_namespace_node *start_node); /* diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index d4a560d2deb6..3f93a6b4e17f 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -144,7 +144,7 @@ void acpi_os_release_mutex(acpi_mutex handle); void *acpi_os_allocate(acpi_size size); void __iomem *acpi_os_map_memory(acpi_physical_address where, - acpi_native_uint length); + acpi_size length); void acpi_os_unmap_memory(void __iomem * logical_address, acpi_size size); diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 2c3806e6546f..bd95ecc6e0fa 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -98,7 +98,7 @@ void acpi_free(void *address); */ acpi_status acpi_reallocate_root_table(void); -acpi_status acpi_find_root_pointer(acpi_native_uint * rsdp_address); +acpi_status acpi_find_root_pointer(acpi_size *rsdp_address); acpi_status acpi_load_tables(void); @@ -108,15 +108,15 @@ acpi_status acpi_unload_table_id(acpi_owner_id id); acpi_status acpi_get_table_header(acpi_string signature, - acpi_native_uint instance, + u32 instance, struct acpi_table_header *out_table_header); acpi_status acpi_get_table(acpi_string signature, - acpi_native_uint instance, struct acpi_table_header **out_table); + u32 instance, struct acpi_table_header **out_table); acpi_status -acpi_get_table_by_index(acpi_native_uint table_index, +acpi_get_table_by_index(u32 table_index, struct acpi_table_header **out_table); acpi_status diff --git a/include/acpi/acstruct.h b/include/acpi/acstruct.h index 818c24d7d2d1..7980a26bad35 100644 --- a/include/acpi/acstruct.h +++ b/include/acpi/acstruct.h @@ -142,7 +142,7 @@ struct acpi_init_walk_info { u16 package_init; u16 object_count; acpi_owner_id owner_id; - acpi_native_uint table_index; + u32 table_index; }; struct acpi_get_devices_info { diff --git a/include/acpi/actables.h b/include/acpi/actables.h index 4b36a55b0b3b..0cbe1b9ab522 100644 --- a/include/acpi/actables.h +++ b/include/acpi/actables.h @@ -49,7 +49,7 @@ acpi_status acpi_allocate_root_table(u32 initial_table_count); /* * tbfadt - FADT parse/convert/validate */ -void acpi_tb_parse_fadt(acpi_native_uint table_index, u8 flags); +void acpi_tb_parse_fadt(u32 table_index, u8 flags); void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length); @@ -58,8 +58,7 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length); */ acpi_status acpi_tb_find_table(char *signature, - char *oem_id, - char *oem_table_id, acpi_native_uint * table_index); + char *oem_id, char *oem_table_id, u32 *table_index); /* * tbinstal - Table removal and deletion @@ -69,30 +68,28 @@ acpi_status acpi_tb_resize_root_table_list(void); acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc); acpi_status -acpi_tb_add_table(struct acpi_table_desc *table_desc, - acpi_native_uint * table_index); +acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index); acpi_status acpi_tb_store_table(acpi_physical_address address, struct acpi_table_header *table, - u32 length, u8 flags, acpi_native_uint * table_index); + u32 length, u8 flags, u32 *table_index); void acpi_tb_delete_table(struct acpi_table_desc *table_desc); void acpi_tb_terminate(void); -void acpi_tb_delete_namespace_by_owner(acpi_native_uint table_index); +void acpi_tb_delete_namespace_by_owner(u32 table_index); -acpi_status acpi_tb_allocate_owner_id(acpi_native_uint table_index); +acpi_status acpi_tb_allocate_owner_id(u32 table_index); -acpi_status acpi_tb_release_owner_id(acpi_native_uint table_index); +acpi_status acpi_tb_release_owner_id(u32 table_index); -acpi_status -acpi_tb_get_owner_id(acpi_native_uint table_index, acpi_owner_id * owner_id); +acpi_status acpi_tb_get_owner_id(u32 table_index, acpi_owner_id *owner_id); -u8 acpi_tb_is_table_loaded(acpi_native_uint table_index); +u8 acpi_tb_is_table_loaded(u32 table_index); -void acpi_tb_set_table_loaded_flag(acpi_native_uint table_index, u8 is_loaded); +void acpi_tb_set_table_loaded_flag(u32 table_index, u8 is_loaded); /* * tbutils - table manager utilities @@ -103,14 +100,14 @@ void acpi_tb_print_table_header(acpi_physical_address address, struct acpi_table_header *header); -u8 acpi_tb_checksum(u8 * buffer, acpi_native_uint length); +u8 acpi_tb_checksum(u8 *buffer, u32 length); acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length); void acpi_tb_install_table(acpi_physical_address address, - u8 flags, char *signature, acpi_native_uint table_index); + u8 flags, char *signature, u32 table_index); acpi_status acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags); diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index dfea2d440488..4ea4f40bf894 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -110,10 +110,10 @@ * usually used for memory allocation, efficient loop counters, and array * indexes. The types are similar to the size_t type in the C library and are * required because there is no C type that consistently represents the native - * data width. + * data width. ACPI_SIZE is needed because there is no guarantee that a + * kernel-level C library is present. * * ACPI_SIZE 16/32/64-bit unsigned value - * ACPI_NATIVE_UINT 16/32/64-bit unsigned value * ACPI_NATIVE_INT 16/32/64-bit signed value * */ @@ -147,9 +147,9 @@ typedef int INT32; /*! [End] no source code translation !*/ -typedef u64 acpi_native_uint; typedef s64 acpi_native_int; +typedef u64 acpi_size; typedef u64 acpi_io_address; typedef u64 acpi_physical_address; @@ -186,9 +186,9 @@ typedef int INT32; /*! [End] no source code translation !*/ -typedef u32 acpi_native_uint; typedef s32 acpi_native_int; +typedef u32 acpi_size; typedef u32 acpi_io_address; typedef u32 acpi_physical_address; @@ -202,10 +202,6 @@ typedef u32 acpi_physical_address; #error unknown ACPI_MACHINE_WIDTH #endif -/* Variable-width type, used instead of clib size_t */ - -typedef acpi_native_uint acpi_size; - /******************************************************************************* * * OS-dependent and compiler-dependent types @@ -219,7 +215,7 @@ typedef acpi_native_uint acpi_size; /* Value returned by acpi_os_get_thread_id */ #ifndef acpi_thread_id -#define acpi_thread_id acpi_native_uint +#define acpi_thread_id acpi_size #endif /* Object returned from acpi_os_create_lock */ @@ -231,7 +227,7 @@ typedef acpi_native_uint acpi_size; /* Flags for acpi_os_acquire_lock/acpi_os_release_lock */ #ifndef acpi_cpu_flags -#define acpi_cpu_flags acpi_native_uint +#define acpi_cpu_flags acpi_size #endif /* Object returned from acpi_os_create_cache */ diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h index b42cadf07302..3f663a0077be 100644 --- a/include/acpi/acutils.h +++ b/include/acpi/acutils.h @@ -172,7 +172,7 @@ char *acpi_ut_strstr(char *string1, char *string2); void *acpi_ut_memcpy(void *dest, const void *src, acpi_size count); -void *acpi_ut_memset(void *dest, acpi_native_uint value, acpi_size count); +void *acpi_ut_memset(void *dest, u8 value, acpi_size count); int acpi_ut_to_upper(int c); @@ -476,7 +476,7 @@ u8 acpi_ut_valid_acpi_name(u32 name); acpi_name acpi_ut_repair_name(char *name); -u8 acpi_ut_valid_acpi_char(char character, acpi_native_uint position); +u8 acpi_ut_valid_acpi_char(char character, u32 position); acpi_status acpi_ut_strtoul64(char *string, u32 base, acpi_integer * ret_integer); -- cgit v1.2.3 From d97b4358da9bdaee5789c85415d770e36aebca52 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 13:43:34 +0800 Subject: ACPICA: Removed unused include files from source files From lint. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/executer/excreate.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/acpi/executer/excreate.c b/drivers/acpi/executer/excreate.c index 60e62c4f0577..ad09696d5069 100644 --- a/drivers/acpi/executer/excreate.c +++ b/drivers/acpi/executer/excreate.c @@ -45,8 +45,6 @@ #include #include #include -#include -#include #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME("excreate") -- cgit v1.2.3 From b52437641edf63cee2f2f73a189154989b4a7ff4 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 13:44:48 +0800 Subject: ACPICA: Several lint changes, no functional changes Remove pointer cast warnings and fix for a debug printf. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/executer/exprep.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/executer/exprep.c b/drivers/acpi/executer/exprep.c index 3a2f8cd4c62a..5d438c32989d 100644 --- a/drivers/acpi/executer/exprep.c +++ b/drivers/acpi/executer/exprep.c @@ -503,11 +503,11 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info) */ second_desc = obj_desc->common.next_object; second_desc->extra.aml_start = - ((union acpi_parse_object *)(info->data_register_node))-> - named.data; + ACPI_CAST_PTR(union acpi_parse_object, + info->data_register_node)->named.data; second_desc->extra.aml_length = - ((union acpi_parse_object *)(info->data_register_node))-> - named.length; + ACPI_CAST_PTR(union acpi_parse_object, + info->data_register_node)->named.length; break; -- cgit v1.2.3 From 4b8ed631679070c183c8ae7519d2bdb9df124ae4 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 13:55:53 +0800 Subject: ACPICA: Add const qualifier for appropriate string constants Mostly MODULE_NAME and printf format strings. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/executer/exdump.c | 5 +-- drivers/acpi/namespace/nsutils.c | 24 +++++++------- drivers/acpi/utilities/utalloc.c | 5 +-- drivers/acpi/utilities/utdebug.c | 26 +++++++++------ drivers/acpi/utilities/utmisc.c | 11 ++++--- drivers/acpi/utilities/utobject.c | 5 +-- include/acpi/acinterp.h | 5 +-- include/acpi/aclocal.h | 4 +-- include/acpi/acmacros.h | 2 +- include/acpi/acnamesp.h | 20 ++++++------ include/acpi/acutils.h | 66 ++++++++++++++++++++++----------------- 11 files changed, 99 insertions(+), 74 deletions(-) diff --git a/drivers/acpi/executer/exdump.c b/drivers/acpi/executer/exdump.c index 976016fda66a..c94638dc42e5 100644 --- a/drivers/acpi/executer/exdump.c +++ b/drivers/acpi/executer/exdump.c @@ -771,9 +771,10 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth) void acpi_ex_dump_operands(union acpi_operand_object **operands, acpi_interpreter_mode interpreter_mode, - char *ident, + const char *ident, u32 num_levels, - char *note, char *module_name, u32 line_number) + const char *note, + const char *module_name, u32 line_number) { u32 i; diff --git a/drivers/acpi/namespace/nsutils.c b/drivers/acpi/namespace/nsutils.c index 5b5619c54594..b0817e1127b1 100644 --- a/drivers/acpi/namespace/nsutils.c +++ b/drivers/acpi/namespace/nsutils.c @@ -73,9 +73,9 @@ acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node *node_to_search); ******************************************************************************/ void -acpi_ns_report_error(char *module_name, +acpi_ns_report_error(const char *module_name, u32 line_number, - char *internal_name, acpi_status lookup_status) + const char *internal_name, acpi_status lookup_status) { acpi_status status; u32 bad_name; @@ -130,11 +130,11 @@ acpi_ns_report_error(char *module_name, ******************************************************************************/ void -acpi_ns_report_method_error(char *module_name, +acpi_ns_report_method_error(const char *module_name, u32 line_number, - char *message, + const char *message, struct acpi_namespace_node *prefix_node, - char *path, acpi_status method_status) + const char *path, acpi_status method_status) { acpi_status status; struct acpi_namespace_node *node = prefix_node; @@ -167,7 +167,8 @@ acpi_ns_report_method_error(char *module_name, ******************************************************************************/ void -acpi_ns_print_node_pathname(struct acpi_namespace_node *node, char *message) +acpi_ns_print_node_pathname(struct acpi_namespace_node *node, + const char *message) { struct acpi_buffer buffer; acpi_status status; @@ -296,7 +297,7 @@ u32 acpi_ns_local(acpi_object_type type) void acpi_ns_get_internal_name_length(struct acpi_namestring_info *info) { - char *next_external_char; + const char *next_external_char; u32 i; ACPI_FUNCTION_ENTRY(); @@ -363,7 +364,7 @@ acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info) { u32 num_segments = info->num_segments; char *internal_name = info->internal_name; - char *external_name = info->next_external_char; + const char *external_name = info->next_external_char; char *result = NULL; u32 i; @@ -471,7 +472,8 @@ acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info) * *******************************************************************************/ -acpi_status acpi_ns_internalize_name(char *external_name, char **converted_name) +acpi_status +acpi_ns_internalize_name(const char *external_name, char **converted_name) { char *internal_name; struct acpi_namestring_info info; @@ -527,7 +529,7 @@ acpi_status acpi_ns_internalize_name(char *external_name, char **converted_name) acpi_status acpi_ns_externalize_name(u32 internal_name_length, - char *internal_name, + const char *internal_name, u32 * converted_name_length, char **converted_name) { u32 names_index = 0; @@ -821,7 +823,7 @@ u32 acpi_ns_opens_scope(acpi_object_type type) acpi_status acpi_ns_get_node(struct acpi_namespace_node *prefix_node, - char *pathname, + const char *pathname, u32 flags, struct acpi_namespace_node **return_node) { union acpi_generic_state scope_info; diff --git a/drivers/acpi/utilities/utalloc.c b/drivers/acpi/utilities/utalloc.c index ede084829a70..3dfb8a442b26 100644 --- a/drivers/acpi/utilities/utalloc.c +++ b/drivers/acpi/utilities/utalloc.c @@ -309,7 +309,8 @@ acpi_ut_initialize_buffer(struct acpi_buffer * buffer, * ******************************************************************************/ -void *acpi_ut_allocate(acpi_size size, u32 component, char *module, u32 line) +void *acpi_ut_allocate(acpi_size size, + u32 component, const char *module, u32 line) { void *allocation; @@ -353,7 +354,7 @@ void *acpi_ut_allocate(acpi_size size, u32 component, char *module, u32 line) ******************************************************************************/ void *acpi_ut_allocate_zeroed(acpi_size size, - u32 component, char *module, u32 line) + u32 component, const char *module, u32 line) { void *allocation; diff --git a/drivers/acpi/utilities/utdebug.c b/drivers/acpi/utilities/utdebug.c index 3919fe599f94..fd66ecb6741e 100644 --- a/drivers/acpi/utilities/utdebug.c +++ b/drivers/acpi/utilities/utdebug.c @@ -157,7 +157,8 @@ void ACPI_INTERNAL_VAR_XFACE acpi_ut_debug_print(u32 requested_debug_level, u32 line_number, const char *function_name, - char *module_name, u32 component_id, char *format, ...) + const char *module_name, + u32 component_id, const char *format, ...) { acpi_thread_id thread_id; va_list args; @@ -228,7 +229,8 @@ void ACPI_INTERNAL_VAR_XFACE acpi_ut_debug_print_raw(u32 requested_debug_level, u32 line_number, const char *function_name, - char *module_name, u32 component_id, char *format, ...) + const char *module_name, + u32 component_id, const char *format, ...) { va_list args; @@ -261,7 +263,8 @@ ACPI_EXPORT_SYMBOL(acpi_ut_debug_print_raw) ******************************************************************************/ void acpi_ut_trace(u32 line_number, - const char *function_name, char *module_name, u32 component_id) + const char *function_name, + const char *module_name, u32 component_id) { acpi_gbl_nesting_level++; @@ -293,7 +296,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_trace) void acpi_ut_trace_ptr(u32 line_number, const char *function_name, - char *module_name, u32 component_id, void *pointer) + const char *module_name, u32 component_id, void *pointer) { acpi_gbl_nesting_level++; acpi_ut_track_stack_ptr(); @@ -324,7 +327,7 @@ acpi_ut_trace_ptr(u32 line_number, void acpi_ut_trace_str(u32 line_number, const char *function_name, - char *module_name, u32 component_id, char *string) + const char *module_name, u32 component_id, char *string) { acpi_gbl_nesting_level++; @@ -356,7 +359,7 @@ acpi_ut_trace_str(u32 line_number, void acpi_ut_trace_u32(u32 line_number, const char *function_name, - char *module_name, u32 component_id, u32 integer) + const char *module_name, u32 component_id, u32 integer) { acpi_gbl_nesting_level++; @@ -386,7 +389,8 @@ acpi_ut_trace_u32(u32 line_number, void acpi_ut_exit(u32 line_number, - const char *function_name, char *module_name, u32 component_id) + const char *function_name, + const char *module_name, u32 component_id) { acpi_ut_debug_print(ACPI_LV_FUNCTIONS, @@ -417,7 +421,8 @@ ACPI_EXPORT_SYMBOL(acpi_ut_exit) void acpi_ut_status_exit(u32 line_number, const char *function_name, - char *module_name, u32 component_id, acpi_status status) + const char *module_name, + u32 component_id, acpi_status status) { if (ACPI_SUCCESS(status)) { @@ -458,7 +463,8 @@ ACPI_EXPORT_SYMBOL(acpi_ut_status_exit) void acpi_ut_value_exit(u32 line_number, const char *function_name, - char *module_name, u32 component_id, acpi_integer value) + const char *module_name, + u32 component_id, acpi_integer value) { acpi_ut_debug_print(ACPI_LV_FUNCTIONS, @@ -490,7 +496,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_value_exit) void acpi_ut_ptr_exit(u32 line_number, const char *function_name, - char *module_name, u32 component_id, u8 * ptr) + const char *module_name, u32 component_id, u8 *ptr) { acpi_ut_debug_print(ACPI_LV_FUNCTIONS, diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c index 6175ca5d73bf..f34be6773556 100644 --- a/drivers/acpi/utilities/utmisc.c +++ b/drivers/acpi/utilities/utmisc.c @@ -1020,7 +1020,7 @@ acpi_ut_walk_package_tree(union acpi_operand_object * source_object, ******************************************************************************/ void ACPI_INTERNAL_VAR_XFACE -acpi_ut_error(char *module_name, u32 line_number, char *format, ...) +acpi_ut_error(const char *module_name, u32 line_number, const char *format, ...) { va_list args; @@ -1033,8 +1033,8 @@ acpi_ut_error(char *module_name, u32 line_number, char *format, ...) } void ACPI_INTERNAL_VAR_XFACE -acpi_ut_exception(char *module_name, - u32 line_number, acpi_status status, char *format, ...) +acpi_ut_exception(const char *module_name, + u32 line_number, acpi_status status, const char *format, ...) { va_list args; @@ -1050,7 +1050,8 @@ acpi_ut_exception(char *module_name, EXPORT_SYMBOL(acpi_ut_exception); void ACPI_INTERNAL_VAR_XFACE -acpi_ut_warning(char *module_name, u32 line_number, char *format, ...) +acpi_ut_warning(const char *module_name, + u32 line_number, const char *format, ...) { va_list args; @@ -1063,7 +1064,7 @@ acpi_ut_warning(char *module_name, u32 line_number, char *format, ...) } void ACPI_INTERNAL_VAR_XFACE -acpi_ut_info(char *module_name, u32 line_number, char *format, ...) +acpi_ut_info(const char *module_name, u32 line_number, const char *format, ...) { va_list args; diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c index ede6a80837df..e25484495e65 100644 --- a/drivers/acpi/utilities/utobject.c +++ b/drivers/acpi/utilities/utobject.c @@ -83,7 +83,8 @@ acpi_ut_get_element_length(u8 object_type, * ******************************************************************************/ -union acpi_operand_object *acpi_ut_create_internal_object_dbg(char *module_name, +union acpi_operand_object *acpi_ut_create_internal_object_dbg(const char + *module_name, u32 line_number, u32 component_id, acpi_object_type @@ -347,7 +348,7 @@ u8 acpi_ut_valid_internal_object(void *object) * ******************************************************************************/ -void *acpi_ut_allocate_object_desc_dbg(char *module_name, +void *acpi_ut_allocate_object_desc_dbg(const char *module_name, u32 line_number, u32 component_id) { union acpi_operand_object *object; diff --git a/include/acpi/acinterp.h b/include/acpi/acinterp.h index e249ce5d3300..accd1208dfe3 100644 --- a/include/acpi/acinterp.h +++ b/include/acpi/acinterp.h @@ -367,9 +367,10 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth); void acpi_ex_dump_operands(union acpi_operand_object **operands, acpi_interpreter_mode interpreter_mode, - char *ident, + const char *ident, u32 num_levels, - char *note, char *module_name, u32 line_number); + const char *note, + const char *module_name, u32 line_number); #ifdef ACPI_FUTURE_USAGE void diff --git a/include/acpi/aclocal.h b/include/acpi/aclocal.h index 62d7468ed3f9..b221c8583ddd 100644 --- a/include/acpi/aclocal.h +++ b/include/acpi/aclocal.h @@ -282,8 +282,8 @@ struct acpi_predefined_names { /* Info structure used to convert external<->internal namestrings */ struct acpi_namestring_info { - char *external_name; - char *next_external_char; + const char *external_name; + const char *next_external_char; char *internal_name; u32 length; u32 num_segments; diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h index d0494ea74b22..77439df4632b 100644 --- a/include/acpi/acmacros.h +++ b/include/acpi/acmacros.h @@ -414,7 +414,7 @@ struct acpi_integer_overlay { * error messages. The __FILE__ macro is not very useful for this, because it * often includes the entire pathname to the module */ -#define ACPI_MODULE_NAME(name) static char ACPI_UNUSED_VAR _acpi_module_name[] = name; +#define ACPI_MODULE_NAME(name) static const char ACPI_UNUSED_VAR _acpi_module_name[] = name; #else #define ACPI_MODULE_NAME(name) #endif diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h index d622c309002e..9ed70a050580 100644 --- a/include/acpi/acnamesp.h +++ b/include/acpi/acnamesp.h @@ -199,7 +199,7 @@ acpi_ns_pattern_match(struct acpi_namespace_node *obj_node, char *search_for); acpi_status acpi_ns_get_node(struct acpi_namespace_node *prefix_node, - char *external_pathname, + const char *external_pathname, u32 flags, struct acpi_namespace_node **out_node); acpi_size acpi_ns_get_pathname_length(struct acpi_namespace_node *node); @@ -263,28 +263,30 @@ acpi_object_type acpi_ns_get_type(struct acpi_namespace_node *node); u32 acpi_ns_local(acpi_object_type type); void -acpi_ns_report_error(char *module_name, +acpi_ns_report_error(const char *module_name, u32 line_number, - char *internal_name, acpi_status lookup_status); + const char *internal_name, acpi_status lookup_status); void -acpi_ns_report_method_error(char *module_name, +acpi_ns_report_method_error(const char *module_name, u32 line_number, - char *message, + const char *message, struct acpi_namespace_node *node, - char *path, acpi_status lookup_status); + const char *path, acpi_status lookup_status); -void acpi_ns_print_node_pathname(struct acpi_namespace_node *node, char *msg); +void +acpi_ns_print_node_pathname(struct acpi_namespace_node *node, const char *msg); acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info); void acpi_ns_get_internal_name_length(struct acpi_namestring_info *info); -acpi_status acpi_ns_internalize_name(char *dotted_name, char **converted_name); +acpi_status +acpi_ns_internalize_name(const char *dotted_name, char **converted_name); acpi_status acpi_ns_externalize_name(u32 internal_name_length, - char *internal_name, + const char *internal_name, u32 * converted_name_length, char **converted_name); struct acpi_namespace_node *acpi_ns_map_handle_to_node(acpi_handle handle); diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h index 3f663a0077be..69f8888771ff 100644 --- a/include/acpi/acutils.h +++ b/include/acpi/acutils.h @@ -245,41 +245,45 @@ void acpi_ut_track_stack_ptr(void); void acpi_ut_trace(u32 line_number, - const char *function_name, char *module_name, u32 component_id); + const char *function_name, + const char *module_name, u32 component_id); void acpi_ut_trace_ptr(u32 line_number, const char *function_name, - char *module_name, u32 component_id, void *pointer); + const char *module_name, u32 component_id, void *pointer); void acpi_ut_trace_u32(u32 line_number, const char *function_name, - char *module_name, u32 component_id, u32 integer); + const char *module_name, u32 component_id, u32 integer); void acpi_ut_trace_str(u32 line_number, const char *function_name, - char *module_name, u32 component_id, char *string); + const char *module_name, u32 component_id, char *string); void acpi_ut_exit(u32 line_number, - const char *function_name, char *module_name, u32 component_id); + const char *function_name, + const char *module_name, u32 component_id); void acpi_ut_status_exit(u32 line_number, const char *function_name, - char *module_name, u32 component_id, acpi_status status); + const char *module_name, + u32 component_id, acpi_status status); void acpi_ut_value_exit(u32 line_number, const char *function_name, - char *module_name, u32 component_id, acpi_integer value); + const char *module_name, + u32 component_id, acpi_integer value); void acpi_ut_ptr_exit(u32 line_number, const char *function_name, - char *module_name, u32 component_id, u8 * ptr); + const char *module_name, u32 component_id, u8 *ptr); void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id); @@ -297,33 +301,35 @@ void ACPI_INTERNAL_VAR_XFACE acpi_ut_debug_print(u32 requested_debug_level, u32 line_number, const char *function_name, - char *module_name, - u32 component_id, char *format, ...) ACPI_PRINTF_LIKE(6); + const char *module_name, + u32 component_id, + const char *format, ...) ACPI_PRINTF_LIKE(6); void ACPI_INTERNAL_VAR_XFACE acpi_ut_debug_print_raw(u32 requested_debug_level, u32 line_number, const char *function_name, - char *module_name, + const char *module_name, u32 component_id, - char *format, ...) ACPI_PRINTF_LIKE(6); + const char *format, ...) ACPI_PRINTF_LIKE(6); void ACPI_INTERNAL_VAR_XFACE -acpi_ut_error(char *module_name, - u32 line_number, char *format, ...) ACPI_PRINTF_LIKE(3); +acpi_ut_error(const char *module_name, + u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3); void ACPI_INTERNAL_VAR_XFACE -acpi_ut_exception(char *module_name, +acpi_ut_exception(const char *module_name, u32 line_number, - acpi_status status, char *format, ...) ACPI_PRINTF_LIKE(4); + acpi_status status, + const char *format, ...) ACPI_PRINTF_LIKE(4); void ACPI_INTERNAL_VAR_XFACE -acpi_ut_warning(char *module_name, - u32 line_number, char *format, ...) ACPI_PRINTF_LIKE(3); +acpi_ut_warning(const char *module_name, + u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3); void ACPI_INTERNAL_VAR_XFACE -acpi_ut_info(char *module_name, - u32 line_number, char *format, ...) ACPI_PRINTF_LIKE(3); +acpi_ut_info(const char *module_name, + u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3); /* * utdelete - Object deletion and reference counts @@ -376,13 +382,14 @@ acpi_ut_execute_sxds(struct acpi_namespace_node *device_node, u8 * highest); /* * utobject - internal object create/delete/cache routines */ -union acpi_operand_object *acpi_ut_create_internal_object_dbg(char *module_name, +union acpi_operand_object *acpi_ut_create_internal_object_dbg(const char + *module_name, u32 line_number, u32 component_id, acpi_object_type type); -void *acpi_ut_allocate_object_desc_dbg(char *module_name, +void *acpi_ut_allocate_object_desc_dbg(const char *module_name, u32 line_number, u32 component_id); #define acpi_ut_create_internal_object(t) acpi_ut_create_internal_object_dbg (_acpi_module_name,__LINE__,_COMPONENT,t) @@ -543,26 +550,29 @@ acpi_status acpi_ut_initialize_buffer(struct acpi_buffer *buffer, acpi_size required_length); -void *acpi_ut_allocate(acpi_size size, u32 component, char *module, u32 line); +void *acpi_ut_allocate(acpi_size size, + u32 component, const char *module, u32 line); void *acpi_ut_allocate_zeroed(acpi_size size, - u32 component, char *module, u32 line); + u32 component, const char *module, u32 line); #ifdef ACPI_DBG_TRACK_ALLOCATIONS void *acpi_ut_allocate_and_track(acpi_size size, - u32 component, char *module, u32 line); + u32 component, const char *module, u32 line); void *acpi_ut_allocate_zeroed_and_track(acpi_size size, - u32 component, char *module, u32 line); + u32 component, + const char *module, u32 line); void -acpi_ut_free_and_track(void *address, u32 component, char *module, u32 line); +acpi_ut_free_and_track(void *address, + u32 component, const char *module, u32 line); #ifdef ACPI_FUTURE_USAGE void acpi_ut_dump_allocation_info(void); #endif /* ACPI_FUTURE_USAGE */ -void acpi_ut_dump_allocations(u32 component, char *module); +void acpi_ut_dump_allocations(u32 component, const char *module); acpi_status acpi_ut_create_list(char *list_name, -- cgit v1.2.3 From b25d2a470bc9ffef4c34248952d914bd6fc0fcf6 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:15:05 +0800 Subject: ACPICA: Update version to 20080514 Update version to 20080514 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- include/acpi/acconfig.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index 28fe8bae1037..f81ba6041d34 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -63,7 +63,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20080321 +#define ACPI_CA_VERSION 0x20080514 /* * OS name, used for the _OS object. The _OS object is essentially obsolete, -- cgit v1.2.3 From d0e184abc5983281ef189db2c759d65d56eb1b80 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:16:47 +0800 Subject: ACPICA: Workaround for reversed _PRT entries from BIOS Some BIOSs erroneously reverse the _PRT SourceName and the SourceIndex. Detect and repair this problem. MS ACPI also allows and repairs this problem, thus ACPICA must also. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/resources/rscreate.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/acpi/resources/rscreate.c b/drivers/acpi/resources/rscreate.c index faddaee1bc07..70c84ece87f1 100644 --- a/drivers/acpi/resources/rscreate.c +++ b/drivers/acpi/resources/rscreate.c @@ -284,6 +284,23 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, } } + /* + * If the BIOS has erroneously reversed the _PRT source_name (index 2) + * and the source_index (index 3), fix it. _PRT is important enough to + * workaround this BIOS error. This also provides compatibility with + * other ACPI implementations. + */ + obj_desc = sub_object_list[3]; + if (!obj_desc + || (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_INTEGER)) { + sub_object_list[3] = sub_object_list[2]; + sub_object_list[2] = obj_desc; + + ACPI_WARNING((AE_INFO, + "(PRT[%X].Source) SourceName and SourceIndex are reversed, fixed", + index)); + } + /* * 3) Third subobject: Dereference the PRT.source_name * The name may be unresolved (slack mode), so allow a null object -- cgit v1.2.3 From 19d0cfe9ddfdf7afa8d1765ab0bd2a7dd30e47c9 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 15:54:40 +0800 Subject: ACPICA: Update DMAR and SRAT table definitions Synchronized tables with current specifications. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- arch/x86/mm/srat_32.c | 3 +-- drivers/acpi/numa.c | 4 ++-- include/acpi/actbl1.h | 19 +++++++++++++++++-- 3 files changed, 20 insertions(+), 6 deletions(-) diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c index f41d67f8f831..1eb2973a301c 100644 --- a/arch/x86/mm/srat_32.c +++ b/arch/x86/mm/srat_32.c @@ -156,10 +156,9 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *memory_affinity) num_memory_chunks++; - printk(KERN_DEBUG "Memory range %08lx to %08lx (type %x)" + printk(KERN_DEBUG "Memory range %08lx to %08lx" " in proximity domain %02x %s\n", start_pfn, end_pfn, - memory_affinity->memory_type, pxm, ((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ? "enabled and removable" : "enabled" ) ); diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index 658e5f3abae0..cb9864e39bae 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -120,10 +120,10 @@ acpi_table_print_srat_entry(struct acpi_subtable_header *header) struct acpi_srat_mem_affinity *p = (struct acpi_srat_mem_affinity *)header; ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "SRAT Memory (0x%lx length 0x%lx type 0x%x) in proximity domain %d %s%s\n", + "SRAT Memory (0x%lx length 0x%lx) in proximity domain %d %s%s\n", (unsigned long)p->base_address, (unsigned long)p->length, - p->memory_type, p->proximity_domain, + p->proximity_domain, (p->flags & ACPI_SRAT_MEM_ENABLED)? "enabled" : "disabled", (p->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)? diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index 9af239bd1153..dfb0fb577d97 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -300,6 +300,7 @@ struct acpi_table_dbgp { /******************************************************************************* * * DMAR - DMA Remapping table + * From "Intel Virtualization Technology for Directed I/O", Sept. 2007 * ******************************************************************************/ @@ -382,6 +383,20 @@ struct acpi_dmar_reserved_memory { #define ACPI_DMAR_ALLOW_ALL (1) + +/* 2: Root Port ATS Capability Reporting Structure */ + +struct acpi_dmar_atsr { + struct acpi_dmar_header header; + u8 flags; + u8 reserved; + u16 segment; +}; + +/* Flags */ + +#define ACPI_DMAR_ALL_PORTS (1) + /******************************************************************************* * * ECDT - Embedded Controller Boot Resources Table @@ -1156,9 +1171,9 @@ struct acpi_srat_mem_affinity { u16 reserved; /* Reserved, must be zero */ u64 base_address; u64 length; - u32 memory_type; /* See acpi_address_range_id */ + u32 reserved1; u32 flags; - u64 reserved1; /* Reserved, must be zero */ + u64 reserved2; /* Reserved, must be zero */ }; /* Flags */ -- cgit v1.2.3 From 75e5b5fb778646a93d98adb1ca697435362d2856 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:19:32 +0800 Subject: ACPICA: Update disassembler for DMAR table changes Now supports the 2007 intel Virtualization Technology for Directed I/O specification. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- include/acpi/acdisasm.h | 1 + include/acpi/actbl1.h | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/include/acpi/acdisasm.h b/include/acpi/acdisasm.h index 788f88782012..f53faca8ec80 100644 --- a/include/acpi/acdisasm.h +++ b/include/acpi/acdisasm.h @@ -162,6 +162,7 @@ extern struct acpi_dmtable_info acpi_dm_table_info_dmar_hdr[]; extern struct acpi_dmtable_info acpi_dm_table_info_dmar_scope[]; extern struct acpi_dmtable_info acpi_dm_table_info_dmar0[]; extern struct acpi_dmtable_info acpi_dm_table_info_dmar1[]; +extern struct acpi_dmtable_info acpi_dm_table_info_dmar2[]; extern struct acpi_dmtable_info acpi_dm_table_info_ecdt[]; extern struct acpi_dmtable_info acpi_dm_table_info_einj[]; extern struct acpi_dmtable_info acpi_dm_table_info_einj0[]; diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index dfb0fb577d97..d38f9be2f6ee 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -311,6 +311,10 @@ struct acpi_table_dmar { u8 reserved[10]; }; +/* Flags */ + +#define ACPI_DMAR_INTR_REMAP (1) + /* DMAR subtable header */ struct acpi_dmar_header { -- cgit v1.2.3 From 5a1a57efeb152d6b8a3b2a20f6b192d074e919ec Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:21:05 +0800 Subject: ACPICA: Fix for invalid large array index on 64-bit systems This problem was introduced in 20080514 as a result of the elimination of the acpi_native_uint type. Code uses a negative array index, which should be eliminated. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/executer/exdump.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/executer/exdump.c b/drivers/acpi/executer/exdump.c index c94638dc42e5..f337c3f73e0c 100644 --- a/drivers/acpi/executer/exdump.c +++ b/drivers/acpi/executer/exdump.c @@ -776,7 +776,7 @@ acpi_ex_dump_operands(union acpi_operand_object **operands, const char *note, const char *module_name, u32 line_number) { - u32 i; + s32 i; ACPI_FUNCTION_NAME(ex_dump_operands); -- cgit v1.2.3 From 71d993e115706a4108bdc7e3cb3cf25309f17aa6 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:25:05 +0800 Subject: ACPICA: Cleanup debug operand dump mechanism Eliminated unnecessary operands; eliminated use of negative index in loop. Operands now displayed in correct order, not backwards. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/dispatcher/dsopcode.c | 20 ++--------- drivers/acpi/dispatcher/dswexec.c | 8 ----- drivers/acpi/executer/exdump.c | 68 +++++++++++++++----------------------- drivers/acpi/executer/exresop.c | 4 +++ drivers/acpi/executer/exstore.c | 6 ---- drivers/acpi/namespace/nsdump.c | 4 +-- include/acpi/acinterp.h | 6 +--- include/acpi/acmacros.h | 4 +-- 8 files changed, 37 insertions(+), 83 deletions(-) diff --git a/drivers/acpi/dispatcher/dsopcode.c b/drivers/acpi/dispatcher/dsopcode.c index ac0bfb1b16fe..6a81c4400edf 100644 --- a/drivers/acpi/dispatcher/dsopcode.c +++ b/drivers/acpi/dispatcher/dsopcode.c @@ -691,12 +691,6 @@ acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state, status = acpi_ex_resolve_operands(op->common.aml_opcode, ACPI_WALK_OPERANDS, walk_state); - - ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE, - acpi_ps_get_opcode_name(op->common.aml_opcode), - walk_state->num_operands, - "after AcpiExResolveOperands"); - if (ACPI_FAILURE(status)) { ACPI_ERROR((AE_INFO, "(%s) bad operand(s) (%X)", acpi_ps_get_opcode_name(op->common.aml_opcode), @@ -785,10 +779,6 @@ acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state, return_ACPI_STATUS(status); } - ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE, - acpi_ps_get_opcode_name(op->common.aml_opcode), - 1, "after AcpiExResolveOperands"); - obj_desc = acpi_ns_get_attached_object(node); if (!obj_desc) { return_ACPI_STATUS(AE_NOT_EXIST); @@ -882,10 +872,6 @@ acpi_ds_eval_table_region_operands(struct acpi_walk_state *walk_state, return_ACPI_STATUS(status); } - ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE, - acpi_ps_get_opcode_name(op->common.aml_opcode), - 1, "after AcpiExResolveOperands"); - operand = &walk_state->operands[0]; /* Find the ACPI table */ @@ -1091,10 +1077,8 @@ acpi_ds_eval_bank_field_operands(struct acpi_walk_state *walk_state, return_ACPI_STATUS(status); } - ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS, ACPI_IMODE_EXECUTE, - acpi_ps_get_opcode_name(op->common.aml_opcode), - 1, "after AcpiExResolveOperands"); - + ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS, + acpi_ps_get_opcode_name(op->common.aml_opcode), 1); /* * Get the bank_value operand and save it * (at Top of stack) diff --git a/drivers/acpi/dispatcher/dswexec.c b/drivers/acpi/dispatcher/dswexec.c index b246b9657ead..b5072fa9c920 100644 --- a/drivers/acpi/dispatcher/dswexec.c +++ b/drivers/acpi/dispatcher/dswexec.c @@ -408,14 +408,6 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state) [walk_state-> num_operands - 1]), walk_state); - if (ACPI_SUCCESS(status)) { - ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS, - ACPI_IMODE_EXECUTE, - acpi_ps_get_opcode_name - (walk_state->opcode), - walk_state->num_operands, - "after ExResolveOperands"); - } } if (ACPI_SUCCESS(status)) { diff --git a/drivers/acpi/executer/exdump.c b/drivers/acpi/executer/exdump.c index f337c3f73e0c..2be2e2bf95bf 100644 --- a/drivers/acpi/executer/exdump.c +++ b/drivers/acpi/executer/exdump.c @@ -580,25 +580,22 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth) case ACPI_TYPE_BUFFER: - acpi_os_printf("Buffer len %X @ %p\n", + acpi_os_printf("Buffer length %.2X @ %p\n", obj_desc->buffer.length, obj_desc->buffer.pointer); - length = obj_desc->buffer.length; - if (length > 64) { - length = 64; - } - /* Debug only -- dump the buffer contents */ if (obj_desc->buffer.pointer) { - acpi_os_printf("Buffer Contents: "); - - for (index = 0; index < length; index++) { - acpi_os_printf(" %02x", - obj_desc->buffer.pointer[index]); + length = obj_desc->buffer.length; + if (length > 128) { + length = 128; } - acpi_os_printf("\n"); + + acpi_os_printf + ("Buffer Contents: (displaying length 0x%.2X)\n", + length); + ACPI_DUMP_BUFFER(obj_desc->buffer.pointer, length); } break; @@ -756,55 +753,42 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth) * * FUNCTION: acpi_ex_dump_operands * - * PARAMETERS: Operands - Operand list - * interpreter_mode - Load or Exec - * Ident - Identification - * num_levels - # of stack entries to dump above line - * Note - Output notation - * module_name - Caller's module name - * line_number - Caller's invocation line number + * PARAMETERS: Operands - A list of Operand objects + * opcode_name - AML opcode name + * num_operands - Operand count for this opcode * - * DESCRIPTION: Dump the object stack + * DESCRIPTION: Dump the operands associated with the opcode * ******************************************************************************/ void acpi_ex_dump_operands(union acpi_operand_object **operands, - acpi_interpreter_mode interpreter_mode, - const char *ident, - u32 num_levels, - const char *note, - const char *module_name, u32 line_number) + const char *opcode_name, u32 num_operands) { - s32 i; - ACPI_FUNCTION_NAME(ex_dump_operands); - if (!ident) { - ident = "?"; - } - - if (!note) { - note = "?"; + if (!opcode_name) { + opcode_name = "UNKNOWN"; } ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "************* Operand Stack Contents (Opcode [%s], %d Operands)\n", - ident, num_levels)); + "**** Start operand dump for opcode [%s], %d operands\n", + opcode_name, num_operands)); - if (num_levels == 0) { - num_levels = 1; + if (num_operands == 0) { + num_operands = 1; } - /* Dump the operand stack starting at the top */ + /* Dump the individual operands */ - for (i = 0; num_levels > 0; i--, num_levels--) { - acpi_ex_dump_operand(operands[i], 0); + while (num_operands) { + acpi_ex_dump_operand(*operands, 0); + operands++; + num_operands--; } ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "************* Operand Stack dump from %s(%d), %s\n", - module_name, line_number, note)); + "**** End operand dump for [%s]\n", opcode_name)); return; } diff --git a/drivers/acpi/executer/exresop.c b/drivers/acpi/executer/exresop.c index 73e29e566a70..54085f16ec28 100644 --- a/drivers/acpi/executer/exresop.c +++ b/drivers/acpi/executer/exresop.c @@ -698,5 +698,9 @@ acpi_ex_resolve_operands(u16 opcode, } } + ACPI_DUMP_OPERANDS(walk_state->operands, + acpi_ps_get_opcode_name(opcode), + walk_state->num_operands); + return_ACPI_STATUS(status); } diff --git a/drivers/acpi/executer/exstore.c b/drivers/acpi/executer/exstore.c index 76c875bc3154..38b55e352495 100644 --- a/drivers/acpi/executer/exstore.c +++ b/drivers/acpi/executer/exstore.c @@ -343,12 +343,6 @@ acpi_ex_store(union acpi_operand_object *source_desc, acpi_ut_get_object_type_name(dest_desc), dest_desc)); - ACPI_DUMP_STACK_ENTRY(source_desc); - ACPI_DUMP_STACK_ENTRY(dest_desc); - ACPI_DUMP_OPERANDS(&dest_desc, ACPI_IMODE_EXECUTE, "ExStore", - 2, - "Target is not a Reference or Constant object"); - return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } diff --git a/drivers/acpi/namespace/nsdump.c b/drivers/acpi/namespace/nsdump.c index 904f9510c0e2..0ab22004728a 100644 --- a/drivers/acpi/namespace/nsdump.c +++ b/drivers/acpi/namespace/nsdump.c @@ -515,12 +515,12 @@ acpi_ns_dump_one_object(acpi_handle obj_handle, if (obj_type > ACPI_TYPE_LOCAL_MAX) { acpi_os_printf - ("(Ptr to ACPI Object type %X [UNKNOWN])\n", + ("(Pointer to ACPI Object type %.2X [UNKNOWN])\n", obj_type); bytes_to_dump = 32; } else { acpi_os_printf - ("(Ptr to ACPI Object type %X [%s])\n", + ("(Pointer to ACPI Object type %.2X [%s])\n", obj_type, acpi_ut_get_type_name(obj_type)); bytes_to_dump = sizeof(union acpi_operand_object); diff --git a/include/acpi/acinterp.h b/include/acpi/acinterp.h index accd1208dfe3..e8db7a3143a5 100644 --- a/include/acpi/acinterp.h +++ b/include/acpi/acinterp.h @@ -366,11 +366,7 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth); void acpi_ex_dump_operands(union acpi_operand_object **operands, - acpi_interpreter_mode interpreter_mode, - const char *ident, - u32 num_levels, - const char *note, - const char *module_name, u32 line_number); + const char *opcode_name, u32 num_opcodes); #ifdef ACPI_FUTURE_USAGE void diff --git a/include/acpi/acmacros.h b/include/acpi/acmacros.h index 77439df4632b..57ab9e9d7593 100644 --- a/include/acpi/acmacros.h +++ b/include/acpi/acmacros.h @@ -597,7 +597,7 @@ struct acpi_integer_overlay { /* Stack and buffer dumping */ #define ACPI_DUMP_STACK_ENTRY(a) acpi_ex_dump_operand((a),0) -#define ACPI_DUMP_OPERANDS(a,b,c,d,e) acpi_ex_dump_operands(a,b,c,d,e,_acpi_module_name,__LINE__) +#define ACPI_DUMP_OPERANDS(a,b,c) acpi_ex_dump_operands(a,b,c) #define ACPI_DUMP_ENTRY(a,b) acpi_ns_dump_entry (a,b) #define ACPI_DUMP_PATHNAME(a,b,c,d) acpi_ns_dump_pathname(a,b,c,d) @@ -633,7 +633,7 @@ struct acpi_integer_overlay { #define ACPI_FUNCTION_VALUE_EXIT(s) do { } while(0) #define ACPI_FUNCTION_ENTRY() do { } while(0) #define ACPI_DUMP_STACK_ENTRY(a) do { } while(0) -#define ACPI_DUMP_OPERANDS(a,b,c,d,e) do { } while(0) +#define ACPI_DUMP_OPERANDS(a,b,c) do { } while(0) #define ACPI_DUMP_ENTRY(a,b) do { } while(0) #define ACPI_DUMP_TABLES(a,b) do { } while(0) #define ACPI_DUMP_PATHNAME(a,b,c,d) do { } while(0) -- cgit v1.2.3 From fd0a43276dc986e186eb27e5755a18e97e07a7eb Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:27:55 +0800 Subject: ACPICA: Cleanup of _PRT parsing code Removed extraneous else clauses, other general cleanup. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/resources/rscreate.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/acpi/resources/rscreate.c b/drivers/acpi/resources/rscreate.c index 70c84ece87f1..7804a8c40e7a 100644 --- a/drivers/acpi/resources/rscreate.c +++ b/drivers/acpi/resources/rscreate.c @@ -181,9 +181,9 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, } /* - * Loop through the ACPI_INTERNAL_OBJECTS - Each object - * should be a package that in turn contains an - * acpi_integer Address, a u8 Pin, a Name and a u8 source_index. + * Loop through the ACPI_INTERNAL_OBJECTS - Each object should be a + * package that in turn contains an acpi_integer Address, a u8 Pin, + * a Name, and a u8 source_index. */ top_object_list = package_object->package.elements; number_of_elements = package_object->package.count; @@ -240,9 +240,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, /* 1) First subobject: Dereference the PRT.Address */ obj_desc = sub_object_list[0]; - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) { - user_prt->address = obj_desc->integer.value; - } else { + if (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_INTEGER) { ACPI_ERROR((AE_INFO, "(PRT[%X].Address) Need Integer, found %s", index, @@ -250,12 +248,12 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, return_ACPI_STATUS(AE_BAD_DATA); } + user_prt->address = obj_desc->integer.value; + /* 2) Second subobject: Dereference the PRT.Pin */ obj_desc = sub_object_list[1]; - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) { - user_prt->pin = (u32) obj_desc->integer.value; - } else { + if (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_INTEGER) { ACPI_ERROR((AE_INFO, "(PRT[%X].Pin) Need Integer, found %s", index, @@ -284,6 +282,8 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, } } + user_prt->pin = (u32) obj_desc->integer.value; + /* * If the BIOS has erroneously reversed the _PRT source_name (index 2) * and the source_index (index 3), fix it. _PRT is important enough to @@ -381,9 +381,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, /* 4) Fourth subobject: Dereference the PRT.source_index */ obj_desc = sub_object_list[source_index_index]; - if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_INTEGER) { - user_prt->source_index = (u32) obj_desc->integer.value; - } else { + if (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_INTEGER) { ACPI_ERROR((AE_INFO, "(PRT[%X].SourceIndex) Need Integer, found %s", index, @@ -391,6 +389,8 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, return_ACPI_STATUS(AE_BAD_DATA); } + user_prt->source_index = (u32) obj_desc->integer.value; + /* Point to the next union acpi_operand_object in the top level package */ top_object_list++; -- cgit v1.2.3 From b53ce3f7186e2fc561f02085b5021df10d715ce2 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:30:04 +0800 Subject: ACPICA: Fix mutex debug code for wrong loop termination value Loop was terminating one iteration early, missing one of the debugger handshake mutexes. Linn Crosetto. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/utilities/utmutex.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/utilities/utmutex.c b/drivers/acpi/utilities/utmutex.c index f7d602b1a894..7331dde9e1b3 100644 --- a/drivers/acpi/utilities/utmutex.c +++ b/drivers/acpi/utilities/utmutex.c @@ -218,7 +218,7 @@ acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id) * the mutex ordering rule. This indicates a coding error somewhere in * the ACPI subsystem code. */ - for (i = mutex_id; i < ACPI_MAX_MUTEX; i++) { + for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) { if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) { if (i == mutex_id) { ACPI_ERROR((AE_INFO, @@ -315,7 +315,7 @@ acpi_status acpi_ut_release_mutex(acpi_mutex_handle mutex_id) * ordering rule. This indicates a coding error somewhere in * the ACPI subsystem code. */ - for (i = mutex_id; i < ACPI_MAX_MUTEX; i++) { + for (i = mutex_id; i < ACPI_NUM_MUTEX; i++) { if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) { if (i == mutex_id) { continue; -- cgit v1.2.3 From 9c9f6d052dc6f469431461a97d49cf9c5558b8ad Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:37:53 +0800 Subject: ACPICA: Update version to 20080609 Update version to 20080609. Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- include/acpi/acconfig.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/acpi/acconfig.h b/include/acpi/acconfig.h index f81ba6041d34..4eb75a88795a 100644 --- a/include/acpi/acconfig.h +++ b/include/acpi/acconfig.h @@ -63,7 +63,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20080514 +#define ACPI_CA_VERSION 0x20080609 /* * OS name, used for the _OS object. The _OS object is essentially obsolete, -- cgit v1.2.3 From 71b58cbb0c30d1f78636a48c4721529449d6ea37 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 20 Jun 2008 09:42:47 +0800 Subject: ACPI: Enhance /sys/firmware/interrupts to allow enable/disable/clear from user-space Allow users to enable/disable/clear a specific & valid GPE/Fixed Event in user space. This is useful for debugging, especially for some interrupt storm issues. All wakeup GPEs are disabled and they can not be enabled at runtime, and we mark them as invalid. All GPEs that don't have a _Lxx/_Exx method are marked as invalid. All Fixed Events that don't have an event handler are marked as invalid and they can't be enabled until an event handler is registered. Signed-off-by: Zhang Rui Signed-off-by: Ling Ming Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- Documentation/ABI/testing/sysfs-firmware-acpi | 127 +++++++++++++------ drivers/acpi/events/evxfevnt.c | 18 ++- drivers/acpi/hardware/hwgpe.c | 2 - drivers/acpi/system.c | 169 ++++++++++++++++++++++++-- include/acpi/achware.h | 2 - include/acpi/acpixf.h | 4 - 6 files changed, 258 insertions(+), 64 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index 9470ed9afcc0..f27be7d1a49f 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -29,46 +29,46 @@ Description: $ cd /sys/firmware/acpi/interrupts $ grep . * - error:0 - ff_gbl_lock:0 - ff_pmtimer:0 - ff_pwr_btn:0 - ff_rt_clk:0 - ff_slp_btn:0 - gpe00:0 - gpe01:0 - gpe02:0 - gpe03:0 - gpe04:0 - gpe05:0 - gpe06:0 - gpe07:0 - gpe08:0 - gpe09:174 - gpe0A:0 - gpe0B:0 - gpe0C:0 - gpe0D:0 - gpe0E:0 - gpe0F:0 - gpe10:0 - gpe11:60 - gpe12:0 - gpe13:0 - gpe14:0 - gpe15:0 - gpe16:0 - gpe17:0 - gpe18:0 - gpe19:7 - gpe1A:0 - gpe1B:0 - gpe1C:0 - gpe1D:0 - gpe1E:0 - gpe1F:0 - gpe_all:241 - sci:241 + error: 0 + ff_gbl_lock: 0 enable + ff_pmtimer: 0 invalid + ff_pwr_btn: 0 enable + ff_rt_clk: 2 disable + ff_slp_btn: 0 invalid + gpe00: 0 invalid + gpe01: 0 enable + gpe02: 108 enable + gpe03: 0 invalid + gpe04: 0 invalid + gpe05: 0 invalid + gpe06: 0 enable + gpe07: 0 enable + gpe08: 0 invalid + gpe09: 0 invalid + gpe0A: 0 invalid + gpe0B: 0 invalid + gpe0C: 0 invalid + gpe0D: 0 invalid + gpe0E: 0 invalid + gpe0F: 0 invalid + gpe10: 0 invalid + gpe11: 0 invalid + gpe12: 0 invalid + gpe13: 0 invalid + gpe14: 0 invalid + gpe15: 0 invalid + gpe16: 0 invalid + gpe17: 1084 enable + gpe18: 0 enable + gpe19: 0 invalid + gpe1A: 0 invalid + gpe1B: 0 invalid + gpe1C: 0 invalid + gpe1D: 0 invalid + gpe1E: 0 invalid + gpe1F: 0 invalid + gpe_all: 1192 + sci: 1194 sci - The total number of times the ACPI SCI has claimed an interrupt. @@ -89,6 +89,13 @@ Description: error - an interrupt that can't be accounted for above. + invalid: it's either a wakeup GPE or a GPE/Fixed Event that + doesn't have an event handler. + + disable: the GPE/Fixed Event is valid but disabled. + + enable: the GPE/Fixed Event is valid and enabled. + Root has permission to clear any of these counters. Eg. # echo 0 > gpe11 @@ -97,3 +104,43 @@ Description: None of these counters has an effect on the function of the system, they are simply statistics. + + Besides this, user can also write specific strings to these files + to enable/disable/clear ACPI interrupts in user space, which can be + used to debug some ACPI interrupt storm issues. + + Note that only writting to VALID GPE/Fixed Event is allowed, + i.e. user can only change the status of runtime GPE and + Fixed Event with event handler installed. + + Let's take power button fixed event for example, please kill acpid + and other user space applications so that the machine won't shutdown + when pressing the power button. + # cat ff_pwr_btn + 0 + # press the power button for 3 times; + # cat ff_pwr_btn + 3 + # echo disable > ff_pwr_btn + # cat ff_pwr_btn + disable + # press the power button for 3 times; + # cat ff_pwr_btn + disable + # echo enable > ff_pwr_btn + # cat ff_pwr_btn + 4 + /* + * this is because the status bit is set even if the enable bit is cleared, + * and it triggers an ACPI fixed event when the enable bit is set again + */ + # press the power button for 3 times; + # cat ff_pwr_btn + 7 + # echo disable > ff_pwr_btn + # press the power button for 3 times; + # echo clear > ff_pwr_btn /* clear the status bit */ + # echo disable > ff_pwr_btn + # cat ff_pwr_btn + 7 + diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c index 99a7502e6a87..73bfd6bf962f 100644 --- a/drivers/acpi/events/evxfevnt.c +++ b/drivers/acpi/events/evxfevnt.c @@ -472,7 +472,6 @@ acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) } ACPI_EXPORT_SYMBOL(acpi_clear_gpe) -#ifdef ACPI_FUTURE_USAGE /******************************************************************************* * * FUNCTION: acpi_get_event_status @@ -489,6 +488,7 @@ ACPI_EXPORT_SYMBOL(acpi_clear_gpe) acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) { acpi_status status = AE_OK; + u32 value; ACPI_FUNCTION_TRACE(acpi_get_event_status); @@ -506,7 +506,20 @@ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) status = acpi_get_register(acpi_gbl_fixed_event_info[event]. - status_register_id, event_status); + enable_register_id, &value); + if (ACPI_FAILURE(status)) + return_ACPI_STATUS(status); + + *event_status = value; + + status = + acpi_get_register(acpi_gbl_fixed_event_info[event]. + status_register_id, &value); + if (ACPI_FAILURE(status)) + return_ACPI_STATUS(status); + + if (value) + *event_status |= ACPI_EVENT_FLAG_SET; return_ACPI_STATUS(status); } @@ -566,7 +579,6 @@ acpi_get_gpe_status(acpi_handle gpe_device, } ACPI_EXPORT_SYMBOL(acpi_get_gpe_status) -#endif /* ACPI_FUTURE_USAGE */ /******************************************************************************* * * FUNCTION: acpi_install_gpe_block diff --git a/drivers/acpi/hardware/hwgpe.c b/drivers/acpi/hardware/hwgpe.c index 58347d6c43f8..0b80db9d9197 100644 --- a/drivers/acpi/hardware/hwgpe.c +++ b/drivers/acpi/hardware/hwgpe.c @@ -186,7 +186,6 @@ acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info) * ******************************************************************************/ -#ifdef ACPI_FUTURE_USAGE acpi_status acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info, acpi_event_status * event_status) @@ -246,7 +245,6 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info, unlock_and_exit: return (status); } -#endif /* ACPI_FUTURE_USAGE */ /****************************************************************************** * diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 5bd2dec9a7ac..d8e3f153b295 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -167,7 +167,13 @@ static int acpi_system_sysfs_init(void) #define COUNT_ERROR 2 /* other */ #define NUM_COUNTERS_EXTRA 3 -static u32 *all_counters; +#define ACPI_EVENT_VALID 0x01 +struct event_counter { + u32 count; + u32 flags; +}; + +static struct event_counter *all_counters; static u32 num_gpes; static u32 num_counters; static struct attribute **all_attrs; @@ -202,9 +208,44 @@ static int count_num_gpes(void) return count; } +static int get_gpe_device(int index, acpi_handle *handle) +{ + struct acpi_gpe_xrupt_info *gpe_xrupt_info; + struct acpi_gpe_block_info *gpe_block; + acpi_cpu_flags flags; + struct acpi_namespace_node *node; + + flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); + + gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; + while (gpe_xrupt_info) { + gpe_block = gpe_xrupt_info->gpe_block_list_head; + node = gpe_block->node; + while (gpe_block) { + index -= gpe_block->register_count * + ACPI_GPE_REGISTER_WIDTH; + if (index < 0) { + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + /* return NULL if it's FADT GPE */ + if (node->type != ACPI_TYPE_DEVICE) + *handle = NULL; + else + *handle = node; + return 0; + } + node = gpe_block->node; + gpe_block = gpe_block->next; + } + gpe_xrupt_info = gpe_xrupt_info->next; + } + acpi_os_release_lock(acpi_gbl_gpe_lock, flags); + + return -ENODEV; +} + static void delete_gpe_attr_array(void) { - u32 *tmp = all_counters; + struct event_counter *tmp = all_counters; all_counters = NULL; kfree(tmp); @@ -230,9 +271,10 @@ void acpi_os_gpe_count(u32 gpe_number) return; if (gpe_number < num_gpes) - all_counters[gpe_number]++; + all_counters[gpe_number].count++; else - all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR]++; + all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR]. + count++; return; } @@ -243,44 +285,144 @@ void acpi_os_fixed_event_count(u32 event_number) return; if (event_number < ACPI_NUM_FIXED_EVENTS) - all_counters[num_gpes + event_number]++; + all_counters[num_gpes + event_number].count++; else - all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR]++; + all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR]. + count++; return; } +static int get_status(u32 index, acpi_event_status *status, acpi_handle *handle) +{ + int result = 0; + + if (index >= num_gpes + ACPI_NUM_FIXED_EVENTS) + goto end; + + if (index < num_gpes) { + result = get_gpe_device(index, handle); + if (result) { + ACPI_EXCEPTION((AE_INFO, AE_NOT_FOUND, + "Invalid GPE 0x%x\n", index)); + goto end; + } + result = acpi_get_gpe_status(*handle, index, + ACPI_NOT_ISR, status); + } else if (index < (num_gpes + ACPI_NUM_FIXED_EVENTS)) + result = acpi_get_event_status(index - num_gpes, status); + + /* + * sleep/power button GPE/Fixed Event is enabled after acpi_system_init, + * check the status at runtime and mark it as valid once it's enabled + */ + if (!result && (*status & ACPI_EVENT_FLAG_ENABLED)) + all_counters[index].flags |= ACPI_EVENT_VALID; +end: + return result; +} + static ssize_t counter_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { - all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI] = + int index = attr - counter_attrs; + int size; + acpi_handle handle; + acpi_event_status status; + int result = 0; + + all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI].count = acpi_irq_handled; - all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE] = + all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE].count = acpi_gpe_count; - return sprintf(buf, "%d\n", all_counters[attr - counter_attrs]); + size = sprintf(buf, "%8d", all_counters[index].count); + + /* "gpe_all" or "sci" */ + if (index >= num_gpes + ACPI_NUM_FIXED_EVENTS) + goto end; + + result = get_status(index, &status, &handle); + if (result) + goto end; + + if (!(all_counters[index].flags & ACPI_EVENT_VALID)) + size += sprintf(buf + size, " invalid"); + else if (status & ACPI_EVENT_FLAG_ENABLED) + size += sprintf(buf + size, " enable"); + else + size += sprintf(buf + size, " disable"); + +end: + size += sprintf(buf + size, "\n"); + return result ? result : size; } /* * counter_set() sets the specified counter. * setting the total "sci" file to any value clears all counters. + * enable/disable/clear a gpe/fixed event in user space. */ static ssize_t counter_set(struct kobject *kobj, struct kobj_attribute *attr, const char *buf, size_t size) { int index = attr - counter_attrs; + acpi_event_status status; + acpi_handle handle; + int result = 0; if (index == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI) { int i; for (i = 0; i < num_counters; ++i) - all_counters[i] = 0; + all_counters[i].count = 0; acpi_gpe_count = 0; acpi_irq_handled = 0; + goto end; + } + /* show the event status for both GPEs and Fixed Events */ + result = get_status(index, &status, &handle); + if (result) + goto end; + + if (!(all_counters[index].flags & ACPI_EVENT_VALID)) { + ACPI_DEBUG_PRINT((ACPI_DB_WARN, + "Can not change Invalid GPE/Fixed Event status\n")); + return -EINVAL; + } + + if (index < num_gpes) { + if (!strcmp(buf, "disable\n") && + (status & ACPI_EVENT_FLAG_ENABLED)) + result = acpi_disable_gpe(handle, index, ACPI_NOT_ISR); + else if (!strcmp(buf, "enable\n") && + !(status & ACPI_EVENT_FLAG_ENABLED)) + result = acpi_enable_gpe(handle, index, ACPI_NOT_ISR); + else if (!strcmp(buf, "clear\n") && + (status & ACPI_EVENT_FLAG_SET)) + result = acpi_clear_gpe(handle, index, ACPI_NOT_ISR); + else + all_counters[index].count = strtoul(buf, NULL, 0); + } else if (index < num_gpes + ACPI_NUM_FIXED_EVENTS) { + int event = index - num_gpes; + if (!strcmp(buf, "disable\n") && + (status & ACPI_EVENT_FLAG_ENABLED)) + result = acpi_disable_event(event, ACPI_NOT_ISR); + else if (!strcmp(buf, "enable\n") && + !(status & ACPI_EVENT_FLAG_ENABLED)) + result = acpi_enable_event(event, ACPI_NOT_ISR); + else if (!strcmp(buf, "clear\n") && + (status & ACPI_EVENT_FLAG_SET)) + result = acpi_clear_event(event); + else + all_counters[index].count = strtoul(buf, NULL, 0); } else - all_counters[index] = strtoul(buf, NULL, 0); + all_counters[index].count = strtoul(buf, NULL, 0); - return size; + if (ACPI_FAILURE(result)) + result = -EINVAL; +end: + return result ? result : size; } void acpi_irq_stats_init(void) @@ -298,7 +440,8 @@ void acpi_irq_stats_init(void) if (all_attrs == NULL) return; - all_counters = kzalloc(sizeof(u32) * (num_counters), GFP_KERNEL); + all_counters = kzalloc(sizeof(struct event_counter) * (num_counters), + GFP_KERNEL); if (all_counters == NULL) goto fail; diff --git a/include/acpi/achware.h b/include/acpi/achware.h index 45e985961f4c..97a72b193276 100644 --- a/include/acpi/achware.h +++ b/include/acpi/achware.h @@ -102,11 +102,9 @@ acpi_status acpi_hw_clear_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, struct acpi_gpe_block_info *gpe_block); -#ifdef ACPI_FUTURE_USAGE acpi_status acpi_hw_get_gpe_status(struct acpi_gpe_event_info *gpe_event_info, acpi_event_status * event_status); -#endif /* ACPI_FUTURE_USAGE */ acpi_status acpi_hw_disable_all_gpes(void); diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index bd95ecc6e0fa..94d94e126e9f 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -248,9 +248,7 @@ acpi_status acpi_disable_event(u32 event, u32 flags); acpi_status acpi_clear_event(u32 event); -#ifdef ACPI_FUTURE_USAGE acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status); -#endif /* ACPI_FUTURE_USAGE */ acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type); @@ -260,12 +258,10 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags); acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags); -#ifdef ACPI_FUTURE_USAGE acpi_status acpi_get_gpe_status(acpi_handle gpe_device, u32 gpe_number, u32 flags, acpi_event_status * event_status); -#endif /* ACPI_FUTURE_USAGE */ acpi_status acpi_install_gpe_block(acpi_handle gpe_device, -- cgit v1.2.3 From 5b53496a5ad79e91052f72761a7c5516b069bc99 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Tue, 17 Jun 2008 14:39:59 +0800 Subject: ACPI: Disable the C2C3_FFH access mode HW has no MWAIT support 991528d7348667924176f3e29addea0675298944 (ACPI: Processor native C-states using MWAIT) started passing C2C3_FFH to _PDC to tell the BIOS that Linux supports MWAIT for deep C-states. However, we should first double check with the hardware that it actually supports MWAIT before potentially exposing a BIOS bug of an MWAIT _CST on HW that doesn't support MWAIT. Signed-off-by: Zhao Yakui Signed-off-by: Li Shaohua Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- arch/x86/kernel/acpi/processor.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c index de2d2e4ebad9..7c074eec39fb 100644 --- a/arch/x86/kernel/acpi/processor.c +++ b/arch/x86/kernel/acpi/processor.c @@ -56,6 +56,12 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c) if (cpu_has(c, X86_FEATURE_ACPI)) buf[2] |= ACPI_PDC_T_FFH; + /* + * If mwait/monitor is unsupported, C2/C3_FFH will be disabled + */ + if (!cpu_has(c, X86_FEATURE_MWAIT)) + buf[2] &= ~(ACPI_PDC_C_C2C3_FFH); + obj->type = ACPI_TYPE_BUFFER; obj->buffer.length = 12; obj->buffer.pointer = (u8 *) buf; -- cgit v1.2.3 From c1e3b377ad48febba6f91b8ae42c44ee4d4ab45e Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Tue, 24 Jun 2008 17:58:53 +0800 Subject: ACPI: Create "idle=halt" bootparam "idle=halt" limits the idle loop to using the halt instruction. No MWAIT, no IO accesses, no C-states deeper than C1. If something is broken in the idle code, "idle=halt" is a less severe workaround than "idle=poll" which disables all power savings. Signed-off-by: Zhao Yakui Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- Documentation/kernel-parameters.txt | 4 +++- arch/ia64/kernel/process.c | 2 ++ arch/x86/kernel/process.c | 17 ++++++++++++++++- drivers/acpi/processor_idle.c | 22 ++++++++++++++++++++++ include/asm-ia64/processor.h | 1 + include/asm-x86/processor.h | 1 + 6 files changed, 45 insertions(+), 2 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 312fe77764a4..65db7f4711aa 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -818,7 +818,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/ide/ide.txt. idle= [X86] - Format: idle=poll or idle=mwait + Format: idle=poll or idle=mwait, idle=halt Poll forces a polling idle loop that can slightly improves the performance of waking up a idle CPU, but will use a lot of power and make the system run hot. Not recommended. @@ -826,6 +826,8 @@ and is between 256 and 4096 characters. It is defined in the file to not use it because it doesn't save as much power as a normal idle loop use the MONITOR/MWAIT idle loop anyways. Performance should be the same as idle=poll. + idle=halt. Halt is forced to be used for CPU idle. + In such case C2/C3 won't be used again. ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem Claim all unknown PCI IDE storage controllers. diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index fabaf08d9a69..612b3c4a0603 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -55,6 +55,8 @@ void (*ia64_mark_idle)(int); unsigned long boot_option_idle_override = 0; EXPORT_SYMBOL(boot_option_idle_override); +unsigned long idle_halt; +EXPORT_SYMBOL(idle_halt); void ia64_do_show_stack (struct unw_frame_info *info, void *arg) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 7dceea947232..7fc729498760 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -7,6 +7,10 @@ #include #include #include +#include + +unsigned long idle_halt; +EXPORT_SYMBOL(idle_halt); struct kmem_cache *task_xstate_cachep; @@ -325,7 +329,18 @@ static int __init idle_setup(char *str) pm_idle = poll_idle; } else if (!strcmp(str, "mwait")) force_mwait = 1; - else + else if (!strcmp(str, "halt")) { + /* + * When the boot option of idle=halt is added, halt is + * forced to be used for CPU idle. In such case CPU C2/C3 + * won't be used again. + * To continue to load the CPU idle driver, don't touch + * the boot_option_idle_override. + */ + pm_idle = default_idle; + idle_halt = 1; + return 0; + } else return -1; boot_option_idle_override = 1; diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 0fc310e7dfd6..c75c7ace8c13 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -41,6 +41,7 @@ #include #include #include +#include /* * Include the apic definitions for x86 to have the APIC timer related defines @@ -57,6 +58,7 @@ #include #include +#include #define ACPI_PROCESSOR_COMPONENT 0x01000000 #define ACPI_PROCESSOR_CLASS "processor" @@ -955,6 +957,17 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) } else { continue; } + if (cx.type == ACPI_STATE_C1 && idle_halt) { + /* + * In most cases the C1 space_id obtained from + * _CST object is FIXED_HARDWARE access mode. + * But when the option of idle=halt is added, + * the entry_method type should be changed from + * CSTATE_FFH to CSTATE_HALT. + */ + cx.entry_method = ACPI_CSTATE_HALT; + snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT"); + } } else { snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI IOPORT 0x%x", cx.address); @@ -1780,6 +1793,15 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, return 0; if (!first_run) { + if (idle_halt) { + /* + * When the boot option of "idle=halt" is added, halt + * is used for CPU IDLE. + * In such case C2/C3 is meaningless. So the max_cstate + * is set to one. + */ + max_cstate = 1; + } dmi_check_system(processor_power_dmi_table); max_cstate = acpi_processor_cstate_check(max_cstate); if (max_cstate < ACPI_C_STATES_MAX) diff --git a/include/asm-ia64/processor.h b/include/asm-ia64/processor.h index 6aff126fc07e..f36e28a5f61e 100644 --- a/include/asm-ia64/processor.h +++ b/include/asm-ia64/processor.h @@ -763,6 +763,7 @@ prefetchw (const void *x) #define spin_lock_prefetch(x) prefetchw(x) extern unsigned long boot_option_idle_override; +extern unsigned long idle_halt; #endif /* !__ASSEMBLY__ */ diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index 7f7382704592..bc221623248e 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -727,6 +727,7 @@ extern int force_mwait; extern void select_idle_routine(const struct cpuinfo_x86 *c); extern unsigned long boot_option_idle_override; +extern unsigned long idle_halt; extern void enable_sep_cpu(void); extern int sysenter_setup(void); -- cgit v1.2.3 From da5e09a1b3e5a9fc0b15a3feb64e921ccc55ba74 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Tue, 24 Jun 2008 18:01:09 +0800 Subject: ACPI : Create "idle=nomwait" bootparam "idle=nomwait" disables the use of the MWAIT instruction from both C1 (C1_FFH) and deeper (C2C3_FFH) C-states. When MWAIT is unavailable, the BIOS and OS generally negotiate to use the HALT instruction for C1, and use IO accesses for deeper C-states. This option is useful for power and performance comparisons, and also to work around BIOS bugs where broken MWAIT support is advertised. http://bugzilla.kernel.org/show_bug.cgi?id=10807 http://bugzilla.kernel.org/show_bug.cgi?id=10914 Signed-off-by: Zhao Yakui Signed-off-by: Li Shaohua Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- Documentation/kernel-parameters.txt | 3 ++- arch/ia64/kernel/process.c | 2 ++ arch/x86/kernel/process.c | 11 +++++++++++ drivers/acpi/processor_core.c | 13 +++++++++++++ drivers/acpi/processor_idle.c | 6 +++++- include/asm-ia64/processor.h | 1 + include/asm-x86/processor.h | 1 + 7 files changed, 35 insertions(+), 2 deletions(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 65db7f4711aa..5e497d16fb51 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -818,7 +818,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/ide/ide.txt. idle= [X86] - Format: idle=poll or idle=mwait, idle=halt + Format: idle=poll or idle=mwait, idle=halt, idle=nomwait Poll forces a polling idle loop that can slightly improves the performance of waking up a idle CPU, but will use a lot of power and make the system run hot. Not recommended. @@ -828,6 +828,7 @@ and is between 256 and 4096 characters. It is defined in the file as idle=poll. idle=halt. Halt is forced to be used for CPU idle. In such case C2/C3 won't be used again. + idle=nomwait. Disable mwait for CPU C-states ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem Claim all unknown PCI IDE storage controllers. diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 612b3c4a0603..3ab8373103ec 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -57,6 +57,8 @@ unsigned long boot_option_idle_override = 0; EXPORT_SYMBOL(boot_option_idle_override); unsigned long idle_halt; EXPORT_SYMBOL(idle_halt); +unsigned long idle_nomwait; +EXPORT_SYMBOL(idle_nomwait); void ia64_do_show_stack (struct unw_frame_info *info, void *arg) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 7fc729498760..4d629c62f4f8 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -11,6 +11,8 @@ unsigned long idle_halt; EXPORT_SYMBOL(idle_halt); +unsigned long idle_nomwait; +EXPORT_SYMBOL(idle_nomwait); struct kmem_cache *task_xstate_cachep; @@ -340,6 +342,15 @@ static int __init idle_setup(char *str) pm_idle = default_idle; idle_halt = 1; return 0; + } else if (!strcmp(str, "nomwait")) { + /* + * If the boot option of "idle=nomwait" is added, + * it means that mwait will be disabled for CPU C2/C3 + * states. In such case it won't touch the variable + * of boot_option_idle_override. + */ + idle_nomwait = 1; + return 0; } else return -1; diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 9a803f85ccfe..4e1bb89fd6c3 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -265,7 +265,20 @@ static int acpi_processor_set_pdc(struct acpi_processor *pr) if (!pdc_in) return status; + if (idle_nomwait) { + /* + * If mwait is disabled for CPU C-states, the C2C3_FFH access + * mode will be disabled in the parameter of _PDC object. + * Of course C1_FFH access mode will also be disabled. + */ + union acpi_object *obj; + u32 *buffer = NULL; + obj = pdc_in->pointer; + buffer = (u32 *)(obj->buffer.pointer); + buffer[2] &= ~(ACPI_PDC_C_C2C3_FFH | ACPI_PDC_C_C1_FFH); + + } status = acpi_evaluate_object(pr->handle, "_PDC", pdc_in, NULL); if (ACPI_FAILURE(status)) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index c75c7ace8c13..d592dbb1d12a 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -957,13 +957,17 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) } else { continue; } - if (cx.type == ACPI_STATE_C1 && idle_halt) { + if (cx.type == ACPI_STATE_C1 && + (idle_halt || idle_nomwait)) { /* * In most cases the C1 space_id obtained from * _CST object is FIXED_HARDWARE access mode. * But when the option of idle=halt is added, * the entry_method type should be changed from * CSTATE_FFH to CSTATE_HALT. + * When the option of idle=nomwait is added, + * the C1 entry_method type should be + * CSTATE_HALT. */ cx.entry_method = ACPI_CSTATE_HALT; snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT"); diff --git a/include/asm-ia64/processor.h b/include/asm-ia64/processor.h index f36e28a5f61e..f88fa054d01d 100644 --- a/include/asm-ia64/processor.h +++ b/include/asm-ia64/processor.h @@ -764,6 +764,7 @@ prefetchw (const void *x) extern unsigned long boot_option_idle_override; extern unsigned long idle_halt; +extern unsigned long idle_nomwait; #endif /* !__ASSEMBLY__ */ diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index bc221623248e..55402d2ab938 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -728,6 +728,7 @@ extern void select_idle_routine(const struct cpuinfo_x86 *c); extern unsigned long boot_option_idle_override; extern unsigned long idle_halt; +extern unsigned long idle_nomwait; extern void enable_sep_cpu(void); extern int sysenter_setup(void); -- cgit v1.2.3 From 2a2a64714d9c40f7705c4de1e79a5b855c7211a9 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Tue, 24 Jun 2008 18:02:57 +0800 Subject: ACPI: Disable MWAIT via DMI on broken Compal board If a system matches in this DMI table, Linux will disable MWAIT support for idle. ie. "idle=nomwait" is automatically invoked and C1_FFH and C2C3_FFH access mode are disabled. http://bugzilla.kernel.org/show_bug.cgi?id=10807 http://bugzilla.kernel.org/show_bug.cgi?id=10914 Signed-off-by: Zhao Yakui Signed-off-by: Li Shaohua Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/processor_core.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 4e1bb89fd6c3..ec0f2d581ece 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -120,6 +120,29 @@ static const struct file_operations acpi_processor_info_fops = { DEFINE_PER_CPU(struct acpi_processor *, processors); struct acpi_processor_errata errata __read_mostly; +static int set_no_mwait(const struct dmi_system_id *id) +{ + printk(KERN_NOTICE PREFIX "%s detected - " + "disable mwait for CPU C-stetes\n", id->ident); + idle_nomwait = 1; + return 0; +} + +static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = { + { + set_no_mwait, "IFL91 board", { + DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"), + DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"), + DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL}, + { + set_no_mwait, "Extensa 5220", { + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_SYS_VENDOR, "ACER"), + DMI_MATCH(DMI_PRODUCT_VERSION, "0100"), + DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL}, + {}, +}; /* -------------------------------------------------------------------------- Errata Handling @@ -1100,6 +1123,11 @@ static int __init acpi_processor_init(void) return -ENOMEM; acpi_processor_dir->owner = THIS_MODULE; + /* + * Check whether the system is DMI table. If yes, OSPM + * should not use mwait for CPU-states. + */ + dmi_check_system(processor_idle_dmi_table); result = cpuidle_register_driver(&acpi_idle_driver); if (result < 0) goto out_proc; -- cgit v1.2.3 From 65573ee72e34e767a135a0841ac5380a2be1a390 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 27 Jun 2008 11:22:46 -0400 Subject: ACPI: Zhang Rui maintains ACPI THERMAL and FAN Reflect that Zhang-Rui has been the sub-maintainer for ACPI THERMAL and FAN for some time now. Also, the Chinese custom is to speak family name first, so rather than "Rui Zhang", write "Zhang Rui", as he does on e-mail. Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- MAINTAINERS | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ec5c8ee30907..4e49e9c8195a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -239,8 +239,8 @@ W: http://www.lesswatts.org/projects/acpi/ S: Supported ACPI FAN DRIVER -P: Len Brown -M: len.brown@intel.com +P: Zhang Rui +M: rui.zhang@intel.com L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported @@ -252,14 +252,14 @@ L: pcihpd-discuss@lists.sourceforge.net S: Supported ACPI THERMAL DRIVER -P: Len Brown -M: len.brown@intel.com +P: Zhang Rui +M: rui.zhang@intel.com L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ S: Supported ACPI VIDEO DRIVER -P: Rui Zhang +P: Zhang Rui M: rui.zhang@intel.com L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ -- cgit v1.2.3 From 8aa863b8ca0855378e3409b5e55ad57a856f6412 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 27 Jun 2008 11:31:50 -0400 Subject: ACPI: Andi Kleen maintains the ACPI sub-system ...while Len is on sabbatical from Intel Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4e49e9c8195a..633bda666e45 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -216,8 +216,8 @@ W: http://code.google.com/p/aceracpi S: Maintained ACPI -P: Len Brown -M: len.brown@intel.com +P: Andi Kleen +M: ak@linux.intel.com M: lenb@kernel.org L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ -- cgit v1.2.3 From 469778c1740fcf3113498b6fdf4559bdec25c58f Mon Sep 17 00:00:00 2001 From: Julia Jomantaite Date: Mon, 23 Jun 2008 22:50:42 +0100 Subject: ACPI: video: fix brightness allocation Fix use of uninitialized device->brightness. Signed-off-by: Julia Jomantaite Signed-off-by: Andi Kleen Acked-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 123 ++++++++++++++++++++++++++++++--------------------- 1 file changed, 73 insertions(+), 50 deletions(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index d089c4519d45..64c889331f3b 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -631,6 +631,76 @@ acpi_video_bus_DOS(struct acpi_video_bus *video, int bios_flag, int lcd_flag) * device : video output device (LCD, CRT, ..) * * Return Value: + * Maximum brightness level + * + * Allocate and initialize device->brightness. + */ + +static int +acpi_video_init_brightness(struct acpi_video_device *device) +{ + union acpi_object *obj = NULL; + int i, max_level = 0, count = 0; + union acpi_object *o; + struct acpi_video_device_brightness *br = NULL; + + if (!ACPI_SUCCESS(acpi_video_device_lcd_query_levels(device, &obj))) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Could not query available " + "LCD brightness level\n")); + goto out; + } + + if (obj->package.count < 2) + goto out; + + br = kzalloc(sizeof(*br), GFP_KERNEL); + if (!br) { + printk(KERN_ERR "can't allocate memory\n"); + goto out; + } + + br->levels = kmalloc(obj->package.count * sizeof *(br->levels), + GFP_KERNEL); + if (!br->levels) + goto out_free; + + for (i = 0; i < obj->package.count; i++) { + o = (union acpi_object *)&obj->package.elements[i]; + if (o->type != ACPI_TYPE_INTEGER) { + printk(KERN_ERR PREFIX "Invalid data\n"); + continue; + } + br->levels[count] = (u32) o->integer.value; + + if (br->levels[count] > max_level) + max_level = br->levels[count]; + count++; + } + + if (count < 2) + goto out_free_levels; + + br->count = count; + device->brightness = br; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "found %d brightness levels\n", count)); + kfree(obj); + return max_level; + +out_free_levels: + kfree(br->levels); +out_free: + kfree(br); +out: + device->brightness = NULL; + kfree(obj); + return 0; +} + +/* + * Arg: + * device : video output device (LCD, CRT, ..) + * + * Return Value: * None * * Find out all required AML methods defined under the output @@ -640,10 +710,7 @@ acpi_video_bus_DOS(struct acpi_video_bus *video, int bios_flag, int lcd_flag) static void acpi_video_device_find_cap(struct acpi_video_device *device) { acpi_handle h_dummy1; - int i; u32 max_level = 0; - union acpi_object *obj = NULL; - struct acpi_video_device_brightness *br = NULL; memset(&device->cap, 0, sizeof(device->cap)); @@ -672,53 +739,7 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device) device->cap._DSS = 1; } - if (ACPI_SUCCESS(acpi_video_device_lcd_query_levels(device, &obj))) { - - if (obj->package.count >= 2) { - int count = 0; - union acpi_object *o; - - br = kzalloc(sizeof(*br), GFP_KERNEL); - if (!br) { - printk(KERN_ERR "can't allocate memory\n"); - } else { - br->levels = kmalloc(obj->package.count * - sizeof *(br->levels), GFP_KERNEL); - if (!br->levels) - goto out; - - for (i = 0; i < obj->package.count; i++) { - o = (union acpi_object *)&obj->package. - elements[i]; - if (o->type != ACPI_TYPE_INTEGER) { - printk(KERN_ERR PREFIX "Invalid data\n"); - continue; - } - br->levels[count] = (u32) o->integer.value; - - if (br->levels[count] > max_level) - max_level = br->levels[count]; - count++; - } - out: - if (count < 2) { - kfree(br->levels); - kfree(br); - } else { - br->count = count; - device->brightness = br; - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "found %d brightness levels\n", - count)); - } - } - } - - } else { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Could not query available LCD brightness level\n")); - } - - kfree(obj); + max_level = acpi_video_init_brightness(device); if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){ int result; @@ -1695,6 +1716,8 @@ static void acpi_video_switch_brightness(struct acpi_video_device *device, int event) { unsigned long level_current, level_next; + if (!device->brightness) + return; acpi_video_device_lcd_get_level_current(device, &level_current); level_next = acpi_video_get_next_level(device, level_current, event); acpi_video_device_lcd_set_level(device, level_next); -- cgit v1.2.3 From b897f46cf7941fff8130ccdaf85f39528bff6a51 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:56:52 -0600 Subject: PNP: add detail to debug resource dump In the debug resource dump, decode the flags and indicate when a resource is disabled or has been automatically assigned. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/pnp/support.c | 34 ++++++++++++++++++++++++++-------- 1 file changed, 26 insertions(+), 8 deletions(-) diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c index 95b076c18c07..7f594ccf4958 100644 --- a/drivers/pnp/support.c +++ b/drivers/pnp/support.c @@ -63,28 +63,46 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc) for (i = 0; i < PNP_MAX_IRQ; i++) { res = pnp_get_resource(dev, IORESOURCE_IRQ, i); if (res && !(res->flags & IORESOURCE_UNSET)) - dev_dbg(&dev->dev, " irq %lld flags %#lx\n", - (unsigned long long) res->start, res->flags); + dev_dbg(&dev->dev, " irq %lld flags %#lx%s%s\n", + (unsigned long long) res->start, res->flags, + res->flags & IORESOURCE_DISABLED ? + " DISABLED" : "", + res->flags & IORESOURCE_AUTO ? + " AUTO" : ""); } for (i = 0; i < PNP_MAX_DMA; i++) { res = pnp_get_resource(dev, IORESOURCE_DMA, i); if (res && !(res->flags & IORESOURCE_UNSET)) - dev_dbg(&dev->dev, " dma %lld flags %#lx\n", - (unsigned long long) res->start, res->flags); + dev_dbg(&dev->dev, " dma %lld flags %#lx%s%s\n", + (unsigned long long) res->start, res->flags, + res->flags & IORESOURCE_DISABLED ? + " DISABLED" : "", + res->flags & IORESOURCE_AUTO ? + " AUTO" : ""); } for (i = 0; i < PNP_MAX_PORT; i++) { res = pnp_get_resource(dev, IORESOURCE_IO, i); if (res && !(res->flags & IORESOURCE_UNSET)) - dev_dbg(&dev->dev, " io %#llx-%#llx flags %#lx\n", + dev_dbg(&dev->dev, " io %#llx-%#llx flags %#lx" + "%s%s\n", (unsigned long long) res->start, - (unsigned long long) res->end, res->flags); + (unsigned long long) res->end, res->flags, + res->flags & IORESOURCE_DISABLED ? + " DISABLED" : "", + res->flags & IORESOURCE_AUTO ? + " AUTO" : ""); } for (i = 0; i < PNP_MAX_MEM; i++) { res = pnp_get_resource(dev, IORESOURCE_MEM, i); if (res && !(res->flags & IORESOURCE_UNSET)) - dev_dbg(&dev->dev, " mem %#llx-%#llx flags %#lx\n", + dev_dbg(&dev->dev, " mem %#llx-%#llx flags %#lx" + "%s%s\n", (unsigned long long) res->start, - (unsigned long long) res->end, res->flags); + (unsigned long long) res->end, res->flags, + res->flags & IORESOURCE_DISABLED ? + " DISABLED" : "", + res->flags & IORESOURCE_AUTO ? + " AUTO" : ""); } #endif } -- cgit v1.2.3 From 87e4acf3ebc02c9d0a2f7a37b655c49176c4d765 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:56:53 -0600 Subject: PNP: remove pnp_resource.index We used pnp_resource.index to keep track of which ISAPNP configuration register a resource should be written to. We needed this only to handle the case where a register is disabled but a subsequent register in the same set is enabled. Rather than explicitly maintaining the pnp_resource.index, this patch adds a resource every time we read an ISAPNP configuration register and marks the resource as IORESOURCE_DISABLED when appropriate. This makes the position in the pnp_resource_table always correspond to the config register index. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/pnp/base.h | 1 - drivers/pnp/interface.c | 20 +++-------- drivers/pnp/isapnp/core.c | 84 ++++++++++++++++------------------------------- drivers/pnp/manager.c | 4 --- 4 files changed, 33 insertions(+), 76 deletions(-) diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h index 886dac823ed6..6f60097c4212 100644 --- a/drivers/pnp/base.h +++ b/drivers/pnp/base.h @@ -57,7 +57,6 @@ struct pnp_resource *pnp_get_pnp_resource(struct pnp_dev *dev, struct pnp_resource { struct resource res; - unsigned int index; /* ISAPNP config register index */ }; struct pnp_resource_table { diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c index 5695a79f3a52..3f8007ab94e3 100644 --- a/drivers/pnp/interface.c +++ b/drivers/pnp/interface.c @@ -320,7 +320,6 @@ pnp_set_current_resources(struct device *dmdev, struct device_attribute *attr, const char *ubuf, size_t count) { struct pnp_dev *dev = to_pnp_dev(dmdev); - struct pnp_resource *pnp_res; char *buf = (void *)ubuf; int retval = 0; resource_size_t start, end; @@ -368,7 +367,6 @@ pnp_set_current_resources(struct device *dmdev, struct device_attribute *attr, goto done; } if (!strnicmp(buf, "set", 3)) { - int nport = 0, nmem = 0, nirq = 0, ndma = 0; if (dev->active) goto done; buf += 3; @@ -391,10 +389,7 @@ pnp_set_current_resources(struct device *dmdev, struct device_attribute *attr, end = simple_strtoul(buf, &buf, 0); } else end = start; - pnp_res = pnp_add_io_resource(dev, start, end, - 0); - if (pnp_res) - pnp_res->index = nport++; + pnp_add_io_resource(dev, start, end, 0); continue; } if (!strnicmp(buf, "mem", 3)) { @@ -411,10 +406,7 @@ pnp_set_current_resources(struct device *dmdev, struct device_attribute *attr, end = simple_strtoul(buf, &buf, 0); } else end = start; - pnp_res = pnp_add_mem_resource(dev, start, end, - 0); - if (pnp_res) - pnp_res->index = nmem++; + pnp_add_mem_resource(dev, start, end, 0); continue; } if (!strnicmp(buf, "irq", 3)) { @@ -422,9 +414,7 @@ pnp_set_current_resources(struct device *dmdev, struct device_attribute *attr, while (isspace(*buf)) ++buf; start = simple_strtoul(buf, &buf, 0); - pnp_res = pnp_add_irq_resource(dev, start, 0); - if (pnp_res) - pnp_res->index = nirq++; + pnp_add_irq_resource(dev, start, 0); continue; } if (!strnicmp(buf, "dma", 3)) { @@ -432,9 +422,7 @@ pnp_set_current_resources(struct device *dmdev, struct device_attribute *attr, while (isspace(*buf)) ++buf; start = simple_strtoul(buf, &buf, 0); - pnp_res = pnp_add_dma_resource(dev, start, 0); - if (pnp_res) - pnp_res->index = ndma++; + pnp_add_dma_resource(dev, start, 0); continue; } break; diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c index f1bccdbdeb08..752b51fbaa6c 100644 --- a/drivers/pnp/isapnp/core.c +++ b/drivers/pnp/isapnp/core.c @@ -928,7 +928,6 @@ EXPORT_SYMBOL(isapnp_write_byte); static int isapnp_get_resources(struct pnp_dev *dev) { - struct pnp_resource *pnp_res; int i, ret; dev_dbg(&dev->dev, "get resources\n"); @@ -940,35 +939,23 @@ static int isapnp_get_resources(struct pnp_dev *dev) for (i = 0; i < ISAPNP_MAX_PORT; i++) { ret = isapnp_read_word(ISAPNP_CFG_PORT + (i << 1)); - if (ret) { - pnp_res = pnp_add_io_resource(dev, ret, ret, 0); - if (pnp_res) - pnp_res->index = i; - } + pnp_add_io_resource(dev, ret, ret, + ret == 0 ? IORESOURCE_DISABLED : 0); } for (i = 0; i < ISAPNP_MAX_MEM; i++) { ret = isapnp_read_word(ISAPNP_CFG_MEM + (i << 3)) << 8; - if (ret) { - pnp_res = pnp_add_mem_resource(dev, ret, ret, 0); - if (pnp_res) - pnp_res->index = i; - } + pnp_add_mem_resource(dev, ret, ret, + ret == 0 ? IORESOURCE_DISABLED : 0); } for (i = 0; i < ISAPNP_MAX_IRQ; i++) { ret = isapnp_read_word(ISAPNP_CFG_IRQ + (i << 1)) >> 8; - if (ret) { - pnp_res = pnp_add_irq_resource(dev, ret, 0); - if (pnp_res) - pnp_res->index = i; - } + pnp_add_irq_resource(dev, ret, + ret == 0 ? IORESOURCE_DISABLED : 0); } for (i = 0; i < ISAPNP_MAX_DMA; i++) { ret = isapnp_read_byte(ISAPNP_CFG_DMA + i); - if (ret != 4) { - pnp_res = pnp_add_dma_resource(dev, ret, 0); - if (pnp_res) - pnp_res->index = i; - } + pnp_add_dma_resource(dev, ret, + ret == 4 ? IORESOURCE_DISABLED : 0); } __end: @@ -978,62 +965,49 @@ __end: static int isapnp_set_resources(struct pnp_dev *dev) { - struct pnp_resource *pnp_res; struct resource *res; - int tmp, index; + int tmp; dev_dbg(&dev->dev, "set resources\n"); isapnp_cfg_begin(dev->card->number, dev->number); dev->active = 1; for (tmp = 0; tmp < ISAPNP_MAX_PORT; tmp++) { - pnp_res = pnp_get_pnp_resource(dev, IORESOURCE_IO, tmp); - if (!pnp_res) - continue; - res = &pnp_res->res; - if (pnp_resource_valid(res)) { - index = pnp_res->index; + res = pnp_get_resource(dev, IORESOURCE_IO, tmp); + if (res && pnp_resource_valid(res) && + !(res->flags & IORESOURCE_DISABLED)) { dev_dbg(&dev->dev, " set io %d to %#llx\n", - index, (unsigned long long) res->start); - isapnp_write_word(ISAPNP_CFG_PORT + (index << 1), + tmp, (unsigned long long) res->start); + isapnp_write_word(ISAPNP_CFG_PORT + (tmp << 1), res->start); } } for (tmp = 0; tmp < ISAPNP_MAX_IRQ; tmp++) { - pnp_res = pnp_get_pnp_resource(dev, IORESOURCE_IRQ, tmp); - if (!pnp_res) - continue; - res = &pnp_res->res; - if (pnp_resource_valid(res)) { + res = pnp_get_resource(dev, IORESOURCE_IRQ, tmp); + if (res && pnp_resource_valid(res) && + !(res->flags & IORESOURCE_DISABLED)) { int irq = res->start; if (irq == 2) irq = 9; - index = pnp_res->index; - dev_dbg(&dev->dev, " set irq %d to %d\n", index, irq); - isapnp_write_byte(ISAPNP_CFG_IRQ + (index << 1), irq); + dev_dbg(&dev->dev, " set irq %d to %d\n", tmp, irq); + isapnp_write_byte(ISAPNP_CFG_IRQ + (tmp << 1), irq); } } for (tmp = 0; tmp < ISAPNP_MAX_DMA; tmp++) { - pnp_res = pnp_get_pnp_resource(dev, IORESOURCE_DMA, tmp); - if (!pnp_res) - continue; - res = &pnp_res->res; - if (pnp_resource_valid(res)) { - index = pnp_res->index; + res = pnp_get_resource(dev, IORESOURCE_DMA, tmp); + if (res && pnp_resource_valid(res) && + !(res->flags & IORESOURCE_DISABLED)) { dev_dbg(&dev->dev, " set dma %d to %lld\n", - index, (unsigned long long) res->start); - isapnp_write_byte(ISAPNP_CFG_DMA + index, res->start); + tmp, (unsigned long long) res->start); + isapnp_write_byte(ISAPNP_CFG_DMA + tmp, res->start); } } for (tmp = 0; tmp < ISAPNP_MAX_MEM; tmp++) { - pnp_res = pnp_get_pnp_resource(dev, IORESOURCE_MEM, tmp); - if (!pnp_res) - continue; - res = &pnp_res->res; - if (pnp_resource_valid(res)) { - index = pnp_res->index; + res = pnp_get_resource(dev, IORESOURCE_MEM, tmp); + if (res && pnp_resource_valid(res) && + !(res->flags & IORESOURCE_DISABLED)) { dev_dbg(&dev->dev, " set mem %d to %#llx\n", - index, (unsigned long long) res->start); - isapnp_write_word(ISAPNP_CFG_MEM + (index << 3), + tmp, (unsigned long long) res->start); + isapnp_write_word(ISAPNP_CFG_MEM + (tmp << 3), (res->start >> 8) & 0xffff); } } diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c index bea0914ff947..90bd9cb65563 100644 --- a/drivers/pnp/manager.c +++ b/drivers/pnp/manager.c @@ -40,7 +40,6 @@ static int pnp_assign_port(struct pnp_dev *dev, struct pnp_port *rule, int idx) } /* set the initial values */ - pnp_res->index = idx; res->flags |= rule->flags | IORESOURCE_IO; res->flags &= ~IORESOURCE_UNSET; @@ -90,7 +89,6 @@ static int pnp_assign_mem(struct pnp_dev *dev, struct pnp_mem *rule, int idx) } /* set the initial values */ - pnp_res->index = idx; res->flags |= rule->flags | IORESOURCE_MEM; res->flags &= ~IORESOURCE_UNSET; @@ -155,7 +153,6 @@ static int pnp_assign_irq(struct pnp_dev *dev, struct pnp_irq *rule, int idx) } /* set the initial values */ - pnp_res->index = idx; res->flags |= rule->flags | IORESOURCE_IRQ; res->flags &= ~IORESOURCE_UNSET; @@ -214,7 +211,6 @@ static void pnp_assign_dma(struct pnp_dev *dev, struct pnp_dma *rule, int idx) } /* set the initial values */ - pnp_res->index = idx; res->flags |= rule->flags | IORESOURCE_DMA; res->flags &= ~IORESOURCE_UNSET; -- cgit v1.2.3 From 940e98dbc616f1df7b63b73858a966969baf261d Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:56:54 -0600 Subject: PNP: add pnp_resource_type() internal interface Given a struct resource, this returns the type (IO, MEM, IRQ, DMA). Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/pnp/base.h | 1 + drivers/pnp/resource.c | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h index 6f60097c4212..4c2a62564994 100644 --- a/drivers/pnp/base.h +++ b/drivers/pnp/base.h @@ -46,6 +46,7 @@ int pnp_check_dma(struct pnp_dev *dev, struct resource *res); void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc); void pnp_init_resource(struct resource *res); +int pnp_resource_type(struct resource *res); struct pnp_resource *pnp_get_pnp_resource(struct pnp_dev *dev, unsigned int type, unsigned int num); diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c index 390b50096e30..cce341f743d4 100644 --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c @@ -499,6 +499,12 @@ int pnp_check_dma(struct pnp_dev *dev, struct resource *res) #endif } +int pnp_resource_type(struct resource *res) +{ + return res->flags & (IORESOURCE_IO | IORESOURCE_MEM | + IORESOURCE_IRQ | IORESOURCE_DMA); +} + struct pnp_resource *pnp_get_pnp_resource(struct pnp_dev *dev, unsigned int type, unsigned int num) { -- cgit v1.2.3 From 9fdee4e02e3b214cde8e4f3beb6776075a3d08a7 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:56:55 -0600 Subject: PNP: add pnp_resource_type_name() helper function This patch adds a "pnp_resource_type_name(struct resource *)" that returns the string resource type. This will be used by the sysfs "show resources" function and the debug resource dump function. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/pnp/base.h | 1 + drivers/pnp/support.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h index 4c2a62564994..c91315826da2 100644 --- a/drivers/pnp/base.h +++ b/drivers/pnp/base.h @@ -43,6 +43,7 @@ int pnp_check_mem(struct pnp_dev *dev, struct resource *res); int pnp_check_irq(struct pnp_dev *dev, struct resource *res); int pnp_check_dma(struct pnp_dev *dev, struct resource *res); +char *pnp_resource_type_name(struct resource *res); void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc); void pnp_init_resource(struct resource *res); diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c index 7f594ccf4958..eb07345f5cf7 100644 --- a/drivers/pnp/support.c +++ b/drivers/pnp/support.c @@ -52,6 +52,21 @@ void pnp_eisa_id_to_string(u32 id, char *str) str[7] = '\0'; } +char *pnp_resource_type_name(struct resource *res) +{ + switch (pnp_resource_type(res)) { + case IORESOURCE_IO: + return "io"; + case IORESOURCE_MEM: + return "mem"; + case IORESOURCE_IRQ: + return "irq"; + case IORESOURCE_DMA: + return "dma"; + } + return NULL; +} + void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc) { #ifdef DEBUG -- cgit v1.2.3 From 20bfdbba7212d19613b93dcea93f26cb65af91fe Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:56:56 -0600 Subject: PNP: make pnp_{port,mem,etc}_start(), et al work for invalid resources Some callers use pnp_port_start() and similar functions without making sure the resource is valid. This patch makes us fall back to returning the initial values if the resource is not valid or not even present. This mostly preserves the previous behavior, where we would just return the initial values set by pnp_init_resource_table(). The original 2.6.25 code didn't range-check the "bar", so it would return garbage if the bar exceeded the table size. This code returns sensible values instead. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- include/linux/pnp.h | 72 ++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 60 insertions(+), 12 deletions(-) diff --git a/include/linux/pnp.h b/include/linux/pnp.h index 63b128d512fb..8b607aecd959 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -40,19 +40,31 @@ static inline resource_size_t pnp_resource_len(struct resource *res) static inline resource_size_t pnp_port_start(struct pnp_dev *dev, unsigned int bar) { - return pnp_get_resource(dev, IORESOURCE_IO, bar)->start; + struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar); + + if (pnp_resource_valid(res)) + return res->start; + return 0; } static inline resource_size_t pnp_port_end(struct pnp_dev *dev, unsigned int bar) { - return pnp_get_resource(dev, IORESOURCE_IO, bar)->end; + struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar); + + if (pnp_resource_valid(res)) + return res->end; + return 0; } static inline unsigned long pnp_port_flags(struct pnp_dev *dev, unsigned int bar) { - return pnp_get_resource(dev, IORESOURCE_IO, bar)->flags; + struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar); + + if (pnp_resource_valid(res)) + return res->flags; + return IORESOURCE_IO | IORESOURCE_AUTO | IORESOURCE_UNSET; } static inline int pnp_port_valid(struct pnp_dev *dev, unsigned int bar) @@ -63,25 +75,41 @@ static inline int pnp_port_valid(struct pnp_dev *dev, unsigned int bar) static inline resource_size_t pnp_port_len(struct pnp_dev *dev, unsigned int bar) { - return pnp_resource_len(pnp_get_resource(dev, IORESOURCE_IO, bar)); + struct resource *res = pnp_get_resource(dev, IORESOURCE_IO, bar); + + if (pnp_resource_valid(res)) + return pnp_resource_len(res); + return 0; } static inline resource_size_t pnp_mem_start(struct pnp_dev *dev, unsigned int bar) { - return pnp_get_resource(dev, IORESOURCE_MEM, bar)->start; + struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar); + + if (pnp_resource_valid(res)) + return res->start; + return 0; } static inline resource_size_t pnp_mem_end(struct pnp_dev *dev, unsigned int bar) { - return pnp_get_resource(dev, IORESOURCE_MEM, bar)->end; + struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar); + + if (pnp_resource_valid(res)) + return res->end; + return 0; } static inline unsigned long pnp_mem_flags(struct pnp_dev *dev, unsigned int bar) { - return pnp_get_resource(dev, IORESOURCE_MEM, bar)->flags; + struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar); + + if (pnp_resource_valid(res)) + return res->flags; + return IORESOURCE_MEM | IORESOURCE_AUTO | IORESOURCE_UNSET; } static inline int pnp_mem_valid(struct pnp_dev *dev, unsigned int bar) @@ -92,18 +120,30 @@ static inline int pnp_mem_valid(struct pnp_dev *dev, unsigned int bar) static inline resource_size_t pnp_mem_len(struct pnp_dev *dev, unsigned int bar) { - return pnp_resource_len(pnp_get_resource(dev, IORESOURCE_MEM, bar)); + struct resource *res = pnp_get_resource(dev, IORESOURCE_MEM, bar); + + if (pnp_resource_valid(res)) + return pnp_resource_len(res); + return 0; } static inline resource_size_t pnp_irq(struct pnp_dev *dev, unsigned int bar) { - return pnp_get_resource(dev, IORESOURCE_IRQ, bar)->start; + struct resource *res = pnp_get_resource(dev, IORESOURCE_IRQ, bar); + + if (pnp_resource_valid(res)) + return res->start; + return -1; } static inline unsigned long pnp_irq_flags(struct pnp_dev *dev, unsigned int bar) { - return pnp_get_resource(dev, IORESOURCE_IRQ, bar)->flags; + struct resource *res = pnp_get_resource(dev, IORESOURCE_IRQ, bar); + + if (pnp_resource_valid(res)) + return res->flags; + return IORESOURCE_IRQ | IORESOURCE_AUTO | IORESOURCE_UNSET; } static inline int pnp_irq_valid(struct pnp_dev *dev, unsigned int bar) @@ -114,12 +154,20 @@ static inline int pnp_irq_valid(struct pnp_dev *dev, unsigned int bar) static inline resource_size_t pnp_dma(struct pnp_dev *dev, unsigned int bar) { - return pnp_get_resource(dev, IORESOURCE_DMA, bar)->start; + struct resource *res = pnp_get_resource(dev, IORESOURCE_DMA, bar); + + if (pnp_resource_valid(res)) + return res->start; + return -1; } static inline unsigned long pnp_dma_flags(struct pnp_dev *dev, unsigned int bar) { - return pnp_get_resource(dev, IORESOURCE_DMA, bar)->flags; + struct resource *res = pnp_get_resource(dev, IORESOURCE_DMA, bar); + + if (pnp_resource_valid(res)) + return res->flags; + return IORESOURCE_DMA | IORESOURCE_AUTO | IORESOURCE_UNSET; } static inline int pnp_dma_valid(struct pnp_dev *dev, unsigned int bar) -- cgit v1.2.3 From aee3ad815dd291a7193ab01da0f1a30c84d00061 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:56:57 -0600 Subject: PNP: replace pnp_resource_table with dynamically allocated resources PNP used to have a fixed-size pnp_resource_table for tracking the resources used by a device. This table often overflowed, so we've had to increase the table size, which wastes memory because most devices have very few resources. This patch replaces the table with a linked list of resources where the entries are allocated on demand. This removes messages like these: pnpacpi: exceeded the max number of IO resources 00:01: too many I/O port resources References: http://bugzilla.kernel.org/show_bug.cgi?id=9535 http://bugzilla.kernel.org/show_bug.cgi?id=9740 http://lkml.org/lkml/2007/11/30/110 This patch also changes the way PNP uses the IORESOURCE_UNSET, IORESOURCE_AUTO, and IORESOURCE_DISABLED flags. Prior to this patch, the pnp_resource_table entries used the flags like this: IORESOURCE_UNSET This table entry is unused and available for use. When this flag is set, we shouldn't look at anything else in the resource structure. This flag is set when a resource table entry is initialized. IORESOURCE_AUTO This resource was assigned automatically by pnp_assign_{io,mem,etc}(). This flag is set when a resource table entry is initialized and cleared whenever we discover a resource setting by reading an ISAPNP config register, parsing a PNPBIOS resource data stream, parsing an ACPI _CRS list, or interpreting a sysfs "set" command. Resources marked IORESOURCE_AUTO are reinitialized and marked as IORESOURCE_UNSET by pnp_clean_resource_table() in these cases: - before we attempt to assign resources automatically, - if we fail to assign resources automatically, - after disabling a device IORESOURCE_DISABLED Set by pnp_assign_{io,mem,etc}() when automatic assignment fails. Also set by PNPBIOS and PNPACPI for: - invalid IRQs or GSI registration failures - invalid DMA channels - I/O ports above 0x10000 - mem ranges with negative length After this patch, there is no pnp_resource_table, and the resource list entries use the flags like this: IORESOURCE_UNSET This flag is no longer used in PNP. Instead of keeping IORESOURCE_UNSET entries in the resource list, we remove entries from the list and free them. IORESOURCE_AUTO No change in meaning: it still means the resource was assigned automatically by pnp_assign_{port,mem,etc}(), but these functions now set the bit explicitly. We still "clean" a device's resource list in the same places, but rather than reinitializing IORESOURCE_AUTO entries, we just remove them from the list. Note that IORESOURCE_AUTO entries are always at the end of the list, so removing them doesn't reorder other list entries. This is because non-IORESOURCE_AUTO entries are added by the ISAPNP, PNPBIOS, or PNPACPI "get resources" methods and by the sysfs "set" command. In each of these cases, we completely free the resource list first. IORESOURCE_DISABLED In addition to the cases where we used to set this flag, ISAPNP now adds an IORESOURCE_DISABLED resource when it reads a configuration register with a "disabled" value. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/pnp/base.h | 18 +--- drivers/pnp/core.c | 25 +++-- drivers/pnp/interface.c | 60 +++++------ drivers/pnp/isapnp/core.c | 12 +-- drivers/pnp/manager.c | 220 +++++++++++------------------------------ drivers/pnp/pnpacpi/rsparser.c | 131 ++++++++++++++++-------- drivers/pnp/pnpbios/rsparser.c | 95 +++++++++++++----- drivers/pnp/quirks.c | 3 +- drivers/pnp/resource.c | 86 ++++------------ drivers/pnp/support.c | 79 +++++++-------- drivers/pnp/system.c | 4 +- include/linux/pnp.h | 20 ++-- 12 files changed, 331 insertions(+), 422 deletions(-) diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h index c91315826da2..1667ac3ca45b 100644 --- a/drivers/pnp/base.h +++ b/drivers/pnp/base.h @@ -46,27 +46,15 @@ int pnp_check_dma(struct pnp_dev *dev, struct resource *res); char *pnp_resource_type_name(struct resource *res); void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc); -void pnp_init_resource(struct resource *res); +void pnp_free_resources(struct pnp_dev *dev); int pnp_resource_type(struct resource *res); -struct pnp_resource *pnp_get_pnp_resource(struct pnp_dev *dev, - unsigned int type, unsigned int num); - -#define PNP_MAX_PORT 40 -#define PNP_MAX_MEM 24 -#define PNP_MAX_IRQ 2 -#define PNP_MAX_DMA 2 - struct pnp_resource { + struct list_head list; struct resource res; }; -struct pnp_resource_table { - struct pnp_resource port[PNP_MAX_PORT]; - struct pnp_resource mem[PNP_MAX_MEM]; - struct pnp_resource dma[PNP_MAX_DMA]; - struct pnp_resource irq[PNP_MAX_IRQ]; -}; +void pnp_free_resource(struct pnp_resource *pnp_res); struct pnp_resource *pnp_add_irq_resource(struct pnp_dev *dev, int irq, int flags); diff --git a/drivers/pnp/core.c b/drivers/pnp/core.c index 20771b7d4482..7182da92aec3 100644 --- a/drivers/pnp/core.c +++ b/drivers/pnp/core.c @@ -99,6 +99,21 @@ static void pnp_free_ids(struct pnp_dev *dev) } } +void pnp_free_resource(struct pnp_resource *pnp_res) +{ + list_del(&pnp_res->list); + kfree(pnp_res); +} + +void pnp_free_resources(struct pnp_dev *dev) +{ + struct pnp_resource *pnp_res, *tmp; + + list_for_each_entry_safe(pnp_res, tmp, &dev->resources, list) { + pnp_free_resource(pnp_res); + } +} + static void pnp_release_device(struct device *dmdev) { struct pnp_dev *dev = to_pnp_dev(dmdev); @@ -106,7 +121,7 @@ static void pnp_release_device(struct device *dmdev) pnp_free_option(dev->independent); pnp_free_option(dev->dependent); pnp_free_ids(dev); - kfree(dev->res); + pnp_free_resources(dev); kfree(dev); } @@ -119,12 +134,7 @@ struct pnp_dev *pnp_alloc_dev(struct pnp_protocol *protocol, int id, char *pnpid if (!dev) return NULL; - dev->res = kzalloc(sizeof(struct pnp_resource_table), GFP_KERNEL); - if (!dev->res) { - kfree(dev); - return NULL; - } - + INIT_LIST_HEAD(&dev->resources); dev->protocol = protocol; dev->number = id; dev->dma_mask = DMA_24BIT_MASK; @@ -140,7 +150,6 @@ struct pnp_dev *pnp_alloc_dev(struct pnp_protocol *protocol, int id, char *pnpid dev_id = pnp_add_id(dev, pnpid); if (!dev_id) { - kfree(dev->res); kfree(dev); return NULL; } diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c index 3f8007ab94e3..7fc86bbed88e 100644 --- a/drivers/pnp/interface.c +++ b/drivers/pnp/interface.c @@ -269,46 +269,38 @@ static ssize_t pnp_show_current_resources(struct device *dmdev, pnp_printf(buffer, "disabled\n"); for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_IO, i)); i++) { - if (pnp_resource_valid(res)) { - pnp_printf(buffer, "io"); - if (res->flags & IORESOURCE_DISABLED) - pnp_printf(buffer, " disabled\n"); - else - pnp_printf(buffer, " 0x%llx-0x%llx\n", - (unsigned long long) res->start, - (unsigned long long) res->end); - } + pnp_printf(buffer, "io"); + if (res->flags & IORESOURCE_DISABLED) + pnp_printf(buffer, " disabled\n"); + else + pnp_printf(buffer, " 0x%llx-0x%llx\n", + (unsigned long long) res->start, + (unsigned long long) res->end); } for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) { - if (pnp_resource_valid(res)) { - pnp_printf(buffer, "mem"); - if (res->flags & IORESOURCE_DISABLED) - pnp_printf(buffer, " disabled\n"); - else - pnp_printf(buffer, " 0x%llx-0x%llx\n", - (unsigned long long) res->start, - (unsigned long long) res->end); - } + pnp_printf(buffer, "mem"); + if (res->flags & IORESOURCE_DISABLED) + pnp_printf(buffer, " disabled\n"); + else + pnp_printf(buffer, " 0x%llx-0x%llx\n", + (unsigned long long) res->start, + (unsigned long long) res->end); } for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_IRQ, i)); i++) { - if (pnp_resource_valid(res)) { - pnp_printf(buffer, "irq"); - if (res->flags & IORESOURCE_DISABLED) - pnp_printf(buffer, " disabled\n"); - else - pnp_printf(buffer, " %lld\n", - (unsigned long long) res->start); - } + pnp_printf(buffer, "irq"); + if (res->flags & IORESOURCE_DISABLED) + pnp_printf(buffer, " disabled\n"); + else + pnp_printf(buffer, " %lld\n", + (unsigned long long) res->start); } for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_DMA, i)); i++) { - if (pnp_resource_valid(res)) { - pnp_printf(buffer, "dma"); - if (res->flags & IORESOURCE_DISABLED) - pnp_printf(buffer, " disabled\n"); - else - pnp_printf(buffer, " %lld\n", - (unsigned long long) res->start); - } + pnp_printf(buffer, "dma"); + if (res->flags & IORESOURCE_DISABLED) + pnp_printf(buffer, " disabled\n"); + else + pnp_printf(buffer, " %lld\n", + (unsigned long long) res->start); } ret = (buffer->curr - buf); kfree(buffer); diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c index 752b51fbaa6c..ca4457ec403b 100644 --- a/drivers/pnp/isapnp/core.c +++ b/drivers/pnp/isapnp/core.c @@ -973,8 +973,7 @@ static int isapnp_set_resources(struct pnp_dev *dev) dev->active = 1; for (tmp = 0; tmp < ISAPNP_MAX_PORT; tmp++) { res = pnp_get_resource(dev, IORESOURCE_IO, tmp); - if (res && pnp_resource_valid(res) && - !(res->flags & IORESOURCE_DISABLED)) { + if (pnp_resource_enabled(res)) { dev_dbg(&dev->dev, " set io %d to %#llx\n", tmp, (unsigned long long) res->start); isapnp_write_word(ISAPNP_CFG_PORT + (tmp << 1), @@ -983,8 +982,7 @@ static int isapnp_set_resources(struct pnp_dev *dev) } for (tmp = 0; tmp < ISAPNP_MAX_IRQ; tmp++) { res = pnp_get_resource(dev, IORESOURCE_IRQ, tmp); - if (res && pnp_resource_valid(res) && - !(res->flags & IORESOURCE_DISABLED)) { + if (pnp_resource_enabled(res)) { int irq = res->start; if (irq == 2) irq = 9; @@ -994,8 +992,7 @@ static int isapnp_set_resources(struct pnp_dev *dev) } for (tmp = 0; tmp < ISAPNP_MAX_DMA; tmp++) { res = pnp_get_resource(dev, IORESOURCE_DMA, tmp); - if (res && pnp_resource_valid(res) && - !(res->flags & IORESOURCE_DISABLED)) { + if (pnp_resource_enabled(res)) { dev_dbg(&dev->dev, " set dma %d to %lld\n", tmp, (unsigned long long) res->start); isapnp_write_byte(ISAPNP_CFG_DMA + tmp, res->start); @@ -1003,8 +1000,7 @@ static int isapnp_set_resources(struct pnp_dev *dev) } for (tmp = 0; tmp < ISAPNP_MAX_MEM; tmp++) { res = pnp_get_resource(dev, IORESOURCE_MEM, tmp); - if (res && pnp_resource_valid(res) && - !(res->flags & IORESOURCE_DISABLED)) { + if (pnp_resource_enabled(res)) { dev_dbg(&dev->dev, " set mem %d to %#llx\n", tmp, (unsigned long long) res->start); isapnp_write_word(ISAPNP_CFG_MEM + (tmp << 3), diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c index 90bd9cb65563..165b624081ad 100644 --- a/drivers/pnp/manager.c +++ b/drivers/pnp/manager.c @@ -19,40 +19,30 @@ DEFINE_MUTEX(pnp_res_mutex); static int pnp_assign_port(struct pnp_dev *dev, struct pnp_port *rule, int idx) { - struct pnp_resource *pnp_res; - struct resource *res; + struct resource *res, local_res; - pnp_res = pnp_get_pnp_resource(dev, IORESOURCE_IO, idx); - if (!pnp_res) { - dev_err(&dev->dev, "too many I/O port resources\n"); - /* pretend we were successful so at least the manager won't try again */ - return 1; - } - - res = &pnp_res->res; - - /* check if this resource has been manually set, if so skip */ - if (!(res->flags & IORESOURCE_AUTO)) { + res = pnp_get_resource(dev, IORESOURCE_IO, idx); + if (res) { dev_dbg(&dev->dev, " io %d already set to %#llx-%#llx " "flags %#lx\n", idx, (unsigned long long) res->start, (unsigned long long) res->end, res->flags); return 1; } - /* set the initial values */ - res->flags |= rule->flags | IORESOURCE_IO; - res->flags &= ~IORESOURCE_UNSET; + res = &local_res; + res->flags = rule->flags | IORESOURCE_AUTO; + res->start = 0; + res->end = 0; if (!rule->size) { res->flags |= IORESOURCE_DISABLED; dev_dbg(&dev->dev, " io %d disabled\n", idx); - return 1; /* skip disabled resource requests */ + goto __add; } res->start = rule->min; res->end = res->start + rule->size - 1; - /* run through until pnp_check_port is happy */ while (!pnp_check_port(dev, res)) { res->start += rule->align; res->end = res->start + rule->size - 1; @@ -61,38 +51,29 @@ static int pnp_assign_port(struct pnp_dev *dev, struct pnp_port *rule, int idx) return 0; } } - dev_dbg(&dev->dev, " assign io %d %#llx-%#llx\n", idx, - (unsigned long long) res->start, (unsigned long long) res->end); + +__add: + pnp_add_io_resource(dev, res->start, res->end, res->flags); return 1; } static int pnp_assign_mem(struct pnp_dev *dev, struct pnp_mem *rule, int idx) { - struct pnp_resource *pnp_res; - struct resource *res; + struct resource *res, local_res; - pnp_res = pnp_get_pnp_resource(dev, IORESOURCE_MEM, idx); - if (!pnp_res) { - dev_err(&dev->dev, "too many memory resources\n"); - /* pretend we were successful so at least the manager won't try again */ - return 1; - } - - res = &pnp_res->res; - - /* check if this resource has been manually set, if so skip */ - if (!(res->flags & IORESOURCE_AUTO)) { + res = pnp_get_resource(dev, IORESOURCE_MEM, idx); + if (res) { dev_dbg(&dev->dev, " mem %d already set to %#llx-%#llx " "flags %#lx\n", idx, (unsigned long long) res->start, (unsigned long long) res->end, res->flags); return 1; } - /* set the initial values */ - res->flags |= rule->flags | IORESOURCE_MEM; - res->flags &= ~IORESOURCE_UNSET; + res = &local_res; + res->flags = rule->flags | IORESOURCE_AUTO; + res->start = 0; + res->end = 0; - /* convert pnp flags to standard Linux flags */ if (!(rule->flags & IORESOURCE_MEM_WRITEABLE)) res->flags |= IORESOURCE_READONLY; if (rule->flags & IORESOURCE_MEM_CACHEABLE) @@ -105,13 +86,12 @@ static int pnp_assign_mem(struct pnp_dev *dev, struct pnp_mem *rule, int idx) if (!rule->size) { res->flags |= IORESOURCE_DISABLED; dev_dbg(&dev->dev, " mem %d disabled\n", idx); - return 1; /* skip disabled resource requests */ + goto __add; } res->start = rule->min; res->end = res->start + rule->size - 1; - /* run through until pnp_check_mem is happy */ while (!pnp_check_mem(dev, res)) { res->start += rule->align; res->end = res->start + rule->size - 1; @@ -120,15 +100,15 @@ static int pnp_assign_mem(struct pnp_dev *dev, struct pnp_mem *rule, int idx) return 0; } } - dev_dbg(&dev->dev, " assign mem %d %#llx-%#llx\n", idx, - (unsigned long long) res->start, (unsigned long long) res->end); + +__add: + pnp_add_mem_resource(dev, res->start, res->end, res->flags); return 1; } static int pnp_assign_irq(struct pnp_dev *dev, struct pnp_irq *rule, int idx) { - struct pnp_resource *pnp_res; - struct resource *res; + struct resource *res, local_res; int i; /* IRQ priority: this table is good for i386 */ @@ -136,58 +116,48 @@ static int pnp_assign_irq(struct pnp_dev *dev, struct pnp_irq *rule, int idx) 5, 10, 11, 12, 9, 14, 15, 7, 3, 4, 13, 0, 1, 6, 8, 2 }; - pnp_res = pnp_get_pnp_resource(dev, IORESOURCE_IRQ, idx); - if (!pnp_res) { - dev_err(&dev->dev, "too many IRQ resources\n"); - /* pretend we were successful so at least the manager won't try again */ - return 1; - } - - res = &pnp_res->res; - - /* check if this resource has been manually set, if so skip */ - if (!(res->flags & IORESOURCE_AUTO)) { + res = pnp_get_resource(dev, IORESOURCE_IRQ, idx); + if (res) { dev_dbg(&dev->dev, " irq %d already set to %d flags %#lx\n", idx, (int) res->start, res->flags); return 1; } - /* set the initial values */ - res->flags |= rule->flags | IORESOURCE_IRQ; - res->flags &= ~IORESOURCE_UNSET; + res = &local_res; + res->flags = rule->flags | IORESOURCE_AUTO; + res->start = -1; + res->end = -1; if (bitmap_empty(rule->map, PNP_IRQ_NR)) { res->flags |= IORESOURCE_DISABLED; dev_dbg(&dev->dev, " irq %d disabled\n", idx); - return 1; /* skip disabled resource requests */ + goto __add; } /* TBD: need check for >16 IRQ */ res->start = find_next_bit(rule->map, PNP_IRQ_NR, 16); if (res->start < PNP_IRQ_NR) { res->end = res->start; - dev_dbg(&dev->dev, " assign irq %d %d\n", idx, - (int) res->start); - return 1; + goto __add; } for (i = 0; i < 16; i++) { if (test_bit(xtab[i], rule->map)) { res->start = res->end = xtab[i]; - if (pnp_check_irq(dev, res)) { - dev_dbg(&dev->dev, " assign irq %d %d\n", idx, - (int) res->start); - return 1; - } + if (pnp_check_irq(dev, res)) + goto __add; } } dev_dbg(&dev->dev, " couldn't assign irq %d\n", idx); return 0; + +__add: + pnp_add_irq_resource(dev, res->start, res->flags); + return 1; } static void pnp_assign_dma(struct pnp_dev *dev, struct pnp_dma *rule, int idx) { - struct pnp_resource *pnp_res; - struct resource *res; + struct resource *res, local_res; int i; /* DMA priority: this table is good for i386 */ @@ -195,127 +165,47 @@ static void pnp_assign_dma(struct pnp_dev *dev, struct pnp_dma *rule, int idx) 1, 3, 5, 6, 7, 0, 2, 4 }; - pnp_res = pnp_get_pnp_resource(dev, IORESOURCE_DMA, idx); - if (!pnp_res) { - dev_err(&dev->dev, "too many DMA resources\n"); - return; - } - - res = &pnp_res->res; - - /* check if this resource has been manually set, if so skip */ - if (!(res->flags & IORESOURCE_AUTO)) { + res = pnp_get_resource(dev, IORESOURCE_DMA, idx); + if (res) { dev_dbg(&dev->dev, " dma %d already set to %d flags %#lx\n", idx, (int) res->start, res->flags); return; } - /* set the initial values */ - res->flags |= rule->flags | IORESOURCE_DMA; - res->flags &= ~IORESOURCE_UNSET; + res = &local_res; + res->flags = rule->flags | IORESOURCE_AUTO; + res->start = -1; + res->end = -1; for (i = 0; i < 8; i++) { if (rule->map & (1 << xtab[i])) { res->start = res->end = xtab[i]; - if (pnp_check_dma(dev, res)) { - dev_dbg(&dev->dev, " assign dma %d %d\n", idx, - (int) res->start); - return; - } + if (pnp_check_dma(dev, res)) + goto __add; } } #ifdef MAX_DMA_CHANNELS res->start = res->end = MAX_DMA_CHANNELS; #endif - res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED; + res->flags |= IORESOURCE_DISABLED; dev_dbg(&dev->dev, " disable dma %d\n", idx); -} -void pnp_init_resource(struct resource *res) -{ - unsigned long type; - - type = res->flags & (IORESOURCE_IO | IORESOURCE_MEM | - IORESOURCE_IRQ | IORESOURCE_DMA); - - res->name = NULL; - res->flags = type | IORESOURCE_AUTO | IORESOURCE_UNSET; - if (type == IORESOURCE_IRQ || type == IORESOURCE_DMA) { - res->start = -1; - res->end = -1; - } else { - res->start = 0; - res->end = 0; - } +__add: + pnp_add_dma_resource(dev, res->start, res->flags); } -/** - * pnp_init_resources - Resets a resource table to default values. - * @table: pointer to the desired resource table - */ void pnp_init_resources(struct pnp_dev *dev) { - struct resource *res; - int idx; - - for (idx = 0; idx < PNP_MAX_IRQ; idx++) { - res = &dev->res->irq[idx].res; - res->flags = IORESOURCE_IRQ; - pnp_init_resource(res); - } - for (idx = 0; idx < PNP_MAX_DMA; idx++) { - res = &dev->res->dma[idx].res; - res->flags = IORESOURCE_DMA; - pnp_init_resource(res); - } - for (idx = 0; idx < PNP_MAX_PORT; idx++) { - res = &dev->res->port[idx].res; - res->flags = IORESOURCE_IO; - pnp_init_resource(res); - } - for (idx = 0; idx < PNP_MAX_MEM; idx++) { - res = &dev->res->mem[idx].res; - res->flags = IORESOURCE_MEM; - pnp_init_resource(res); - } + pnp_free_resources(dev); } -/** - * pnp_clean_resources - clears resources that were not manually set - * @res: the resources to clean - */ static void pnp_clean_resource_table(struct pnp_dev *dev) { - struct resource *res; - int idx; - - for (idx = 0; idx < PNP_MAX_IRQ; idx++) { - res = &dev->res->irq[idx].res; - if (res->flags & IORESOURCE_AUTO) { - res->flags = IORESOURCE_IRQ; - pnp_init_resource(res); - } - } - for (idx = 0; idx < PNP_MAX_DMA; idx++) { - res = &dev->res->dma[idx].res; - if (res->flags & IORESOURCE_AUTO) { - res->flags = IORESOURCE_DMA; - pnp_init_resource(res); - } - } - for (idx = 0; idx < PNP_MAX_PORT; idx++) { - res = &dev->res->port[idx].res; - if (res->flags & IORESOURCE_AUTO) { - res->flags = IORESOURCE_IO; - pnp_init_resource(res); - } - } - for (idx = 0; idx < PNP_MAX_MEM; idx++) { - res = &dev->res->mem[idx].res; - if (res->flags & IORESOURCE_AUTO) { - res->flags = IORESOURCE_MEM; - pnp_init_resource(res); - } + struct pnp_resource *pnp_res, *tmp; + + list_for_each_entry_safe(pnp_res, tmp, &dev->resources, list) { + if (pnp_res->res.flags & IORESOURCE_AUTO) + pnp_free_resource(pnp_res); } } diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 46c791adb894..9a45c25b46d2 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -806,6 +806,13 @@ static void pnpacpi_encode_irq(struct pnp_dev *dev, struct acpi_resource_irq *irq = &resource->data.irq; int triggering, polarity, shareable; + if (!pnp_resource_enabled(p)) { + irq->interrupt_count = 0; + dev_dbg(&dev->dev, " encode irq (%s)\n", + p ? "disabled" : "missing"); + return; + } + decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable); irq->triggering = triggering; irq->polarity = polarity; @@ -828,6 +835,13 @@ static void pnpacpi_encode_ext_irq(struct pnp_dev *dev, struct acpi_resource_extended_irq *extended_irq = &resource->data.extended_irq; int triggering, polarity, shareable; + if (!pnp_resource_enabled(p)) { + extended_irq->interrupt_count = 0; + dev_dbg(&dev->dev, " encode extended irq (%s)\n", + p ? "disabled" : "missing"); + return; + } + decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable); extended_irq->producer_consumer = ACPI_CONSUMER; extended_irq->triggering = triggering; @@ -848,6 +862,13 @@ static void pnpacpi_encode_dma(struct pnp_dev *dev, { struct acpi_resource_dma *dma = &resource->data.dma; + if (!pnp_resource_enabled(p)) { + dma->channel_count = 0; + dev_dbg(&dev->dev, " encode dma (%s)\n", + p ? "disabled" : "missing"); + return; + } + /* Note: pnp_assign_dma will copy pnp_dma->flags into p->flags */ switch (p->flags & IORESOURCE_DMA_SPEED_MASK) { case IORESOURCE_DMA_TYPEA: @@ -889,17 +910,21 @@ static void pnpacpi_encode_io(struct pnp_dev *dev, { struct acpi_resource_io *io = &resource->data.io; - /* Note: pnp_assign_port will copy pnp_port->flags into p->flags */ - io->io_decode = (p->flags & PNP_PORT_FLAG_16BITADDR) ? - ACPI_DECODE_16 : ACPI_DECODE_10; - io->minimum = p->start; - io->maximum = p->end; - io->alignment = 0; /* Correct? */ - io->address_length = p->end - p->start + 1; - - dev_dbg(&dev->dev, " encode io %#llx-%#llx decode %#x\n", - (unsigned long long) p->start, (unsigned long long) p->end, - io->io_decode); + if (pnp_resource_enabled(p)) { + /* Note: pnp_assign_port copies pnp_port->flags into p->flags */ + io->io_decode = (p->flags & PNP_PORT_FLAG_16BITADDR) ? + ACPI_DECODE_16 : ACPI_DECODE_10; + io->minimum = p->start; + io->maximum = p->end; + io->alignment = 0; /* Correct? */ + io->address_length = p->end - p->start + 1; + } else { + io->minimum = 0; + io->address_length = 0; + } + + dev_dbg(&dev->dev, " encode io %#x-%#x decode %#x\n", io->minimum, + io->minimum + io->address_length - 1, io->io_decode); } static void pnpacpi_encode_fixed_io(struct pnp_dev *dev, @@ -908,11 +933,16 @@ static void pnpacpi_encode_fixed_io(struct pnp_dev *dev, { struct acpi_resource_fixed_io *fixed_io = &resource->data.fixed_io; - fixed_io->address = p->start; - fixed_io->address_length = p->end - p->start + 1; + if (pnp_resource_enabled(p)) { + fixed_io->address = p->start; + fixed_io->address_length = p->end - p->start + 1; + } else { + fixed_io->address = 0; + fixed_io->address_length = 0; + } - dev_dbg(&dev->dev, " encode fixed_io %#llx-%#llx\n", - (unsigned long long) p->start, (unsigned long long) p->end); + dev_dbg(&dev->dev, " encode fixed_io %#x-%#x\n", fixed_io->address, + fixed_io->address + fixed_io->address_length - 1); } static void pnpacpi_encode_mem24(struct pnp_dev *dev, @@ -921,17 +951,22 @@ static void pnpacpi_encode_mem24(struct pnp_dev *dev, { struct acpi_resource_memory24 *memory24 = &resource->data.memory24; - /* Note: pnp_assign_mem will copy pnp_mem->flags into p->flags */ - memory24->write_protect = - (p->flags & IORESOURCE_MEM_WRITEABLE) ? - ACPI_READ_WRITE_MEMORY : ACPI_READ_ONLY_MEMORY; - memory24->minimum = p->start; - memory24->maximum = p->end; - memory24->alignment = 0; - memory24->address_length = p->end - p->start + 1; - - dev_dbg(&dev->dev, " encode mem24 %#llx-%#llx write_protect %#x\n", - (unsigned long long) p->start, (unsigned long long) p->end, + if (pnp_resource_enabled(p)) { + /* Note: pnp_assign_mem copies pnp_mem->flags into p->flags */ + memory24->write_protect = p->flags & IORESOURCE_MEM_WRITEABLE ? + ACPI_READ_WRITE_MEMORY : ACPI_READ_ONLY_MEMORY; + memory24->minimum = p->start; + memory24->maximum = p->end; + memory24->alignment = 0; + memory24->address_length = p->end - p->start + 1; + } else { + memory24->minimum = 0; + memory24->address_length = 0; + } + + dev_dbg(&dev->dev, " encode mem24 %#x-%#x write_protect %#x\n", + memory24->minimum, + memory24->minimum + memory24->address_length - 1, memory24->write_protect); } @@ -941,16 +976,21 @@ static void pnpacpi_encode_mem32(struct pnp_dev *dev, { struct acpi_resource_memory32 *memory32 = &resource->data.memory32; - memory32->write_protect = - (p->flags & IORESOURCE_MEM_WRITEABLE) ? - ACPI_READ_WRITE_MEMORY : ACPI_READ_ONLY_MEMORY; - memory32->minimum = p->start; - memory32->maximum = p->end; - memory32->alignment = 0; - memory32->address_length = p->end - p->start + 1; + if (pnp_resource_enabled(p)) { + memory32->write_protect = p->flags & IORESOURCE_MEM_WRITEABLE ? + ACPI_READ_WRITE_MEMORY : ACPI_READ_ONLY_MEMORY; + memory32->minimum = p->start; + memory32->maximum = p->end; + memory32->alignment = 0; + memory32->address_length = p->end - p->start + 1; + } else { + memory32->minimum = 0; + memory32->alignment = 0; + } - dev_dbg(&dev->dev, " encode mem32 %#llx-%#llx write_protect %#x\n", - (unsigned long long) p->start, (unsigned long long) p->end, + dev_dbg(&dev->dev, " encode mem32 %#x-%#x write_protect %#x\n", + memory32->minimum, + memory32->minimum + memory32->address_length - 1, memory32->write_protect); } @@ -960,15 +1000,20 @@ static void pnpacpi_encode_fixed_mem32(struct pnp_dev *dev, { struct acpi_resource_fixed_memory32 *fixed_memory32 = &resource->data.fixed_memory32; - fixed_memory32->write_protect = - (p->flags & IORESOURCE_MEM_WRITEABLE) ? - ACPI_READ_WRITE_MEMORY : ACPI_READ_ONLY_MEMORY; - fixed_memory32->address = p->start; - fixed_memory32->address_length = p->end - p->start + 1; + if (pnp_resource_enabled(p)) { + fixed_memory32->write_protect = + p->flags & IORESOURCE_MEM_WRITEABLE ? + ACPI_READ_WRITE_MEMORY : ACPI_READ_ONLY_MEMORY; + fixed_memory32->address = p->start; + fixed_memory32->address_length = p->end - p->start + 1; + } else { + fixed_memory32->address = 0; + fixed_memory32->address_length = 0; + } - dev_dbg(&dev->dev, " encode fixed_mem32 %#llx-%#llx " - "write_protect %#x\n", - (unsigned long long) p->start, (unsigned long long) p->end, + dev_dbg(&dev->dev, " encode fixed_mem32 %#x-%#x write_protect %#x\n", + fixed_memory32->address, + fixed_memory32->address + fixed_memory32->address_length - 1, fixed_memory32->write_protect); } diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c index 5ff9a4c0447e..01f0c3dd1b08 100644 --- a/drivers/pnp/pnpbios/rsparser.c +++ b/drivers/pnp/pnpbios/rsparser.c @@ -526,8 +526,16 @@ len_err: static void pnpbios_encode_mem(struct pnp_dev *dev, unsigned char *p, struct resource *res) { - unsigned long base = res->start; - unsigned long len = res->end - res->start + 1; + unsigned long base; + unsigned long len; + + if (pnp_resource_enabled(res)) { + base = res->start; + len = res->end - res->start + 1; + } else { + base = 0; + len = 0; + } p[4] = (base >> 8) & 0xff; p[5] = ((base >> 8) >> 8) & 0xff; @@ -536,15 +544,22 @@ static void pnpbios_encode_mem(struct pnp_dev *dev, unsigned char *p, p[10] = (len >> 8) & 0xff; p[11] = ((len >> 8) >> 8) & 0xff; - dev_dbg(&dev->dev, " encode mem %#llx-%#llx\n", - (unsigned long long) res->start, (unsigned long long) res->end); + dev_dbg(&dev->dev, " encode mem %#lx-%#lx\n", base, base + len - 1); } static void pnpbios_encode_mem32(struct pnp_dev *dev, unsigned char *p, struct resource *res) { - unsigned long base = res->start; - unsigned long len = res->end - res->start + 1; + unsigned long base; + unsigned long len; + + if (pnp_resource_enabled(res)) { + base = res->start; + len = res->end - res->start + 1; + } else { + base = 0; + len = 0; + } p[4] = base & 0xff; p[5] = (base >> 8) & 0xff; @@ -559,15 +574,22 @@ static void pnpbios_encode_mem32(struct pnp_dev *dev, unsigned char *p, p[18] = (len >> 16) & 0xff; p[19] = (len >> 24) & 0xff; - dev_dbg(&dev->dev, " encode mem32 %#llx-%#llx\n", - (unsigned long long) res->start, (unsigned long long) res->end); + dev_dbg(&dev->dev, " encode mem32 %#lx-%#lx\n", base, base + len - 1); } static void pnpbios_encode_fixed_mem32(struct pnp_dev *dev, unsigned char *p, struct resource *res) { - unsigned long base = res->start; - unsigned long len = res->end - res->start + 1; + unsigned long base; + unsigned long len; + + if (pnp_resource_enabled(res)) { + base = res->start; + len = res->end - res->start + 1; + } else { + base = 0; + len = 0; + } p[4] = base & 0xff; p[5] = (base >> 8) & 0xff; @@ -578,40 +600,54 @@ static void pnpbios_encode_fixed_mem32(struct pnp_dev *dev, unsigned char *p, p[10] = (len >> 16) & 0xff; p[11] = (len >> 24) & 0xff; - dev_dbg(&dev->dev, " encode fixed_mem32 %#llx-%#llx\n", - (unsigned long long) res->start, (unsigned long long) res->end); + dev_dbg(&dev->dev, " encode fixed_mem32 %#lx-%#lx\n", base, + base + len - 1); } static void pnpbios_encode_irq(struct pnp_dev *dev, unsigned char *p, struct resource *res) { - unsigned long map = 0; + unsigned long map; + + if (pnp_resource_enabled(res)) + map = 1 << res->start; + else + map = 0; - map = 1 << res->start; p[1] = map & 0xff; p[2] = (map >> 8) & 0xff; - dev_dbg(&dev->dev, " encode irq %llu\n", - (unsigned long long)res->start); + dev_dbg(&dev->dev, " encode irq mask %#lx\n", map); } static void pnpbios_encode_dma(struct pnp_dev *dev, unsigned char *p, struct resource *res) { - unsigned long map = 0; + unsigned long map; + + if (pnp_resource_enabled(res)) + map = 1 << res->start; + else + map = 0; - map = 1 << res->start; p[1] = map & 0xff; - dev_dbg(&dev->dev, " encode dma %llu\n", - (unsigned long long)res->start); + dev_dbg(&dev->dev, " encode dma mask %#lx\n", map); } static void pnpbios_encode_port(struct pnp_dev *dev, unsigned char *p, struct resource *res) { - unsigned long base = res->start; - unsigned long len = res->end - res->start + 1; + unsigned long base; + unsigned long len; + + if (pnp_resource_enabled(res)) { + base = res->start; + len = res->end - res->start + 1; + } else { + base = 0; + len = 0; + } p[2] = base & 0xff; p[3] = (base >> 8) & 0xff; @@ -619,8 +655,7 @@ static void pnpbios_encode_port(struct pnp_dev *dev, unsigned char *p, p[5] = (base >> 8) & 0xff; p[7] = len & 0xff; - dev_dbg(&dev->dev, " encode io %#llx-%#llx\n", - (unsigned long long) res->start, (unsigned long long) res->end); + dev_dbg(&dev->dev, " encode io %#lx-%#lx\n", base, base + len - 1); } static void pnpbios_encode_fixed_port(struct pnp_dev *dev, unsigned char *p, @@ -629,12 +664,20 @@ static void pnpbios_encode_fixed_port(struct pnp_dev *dev, unsigned char *p, unsigned long base = res->start; unsigned long len = res->end - res->start + 1; + if (pnp_resource_enabled(res)) { + base = res->start; + len = res->end - res->start + 1; + } else { + base = 0; + len = 0; + } + p[1] = base & 0xff; p[2] = (base >> 8) & 0xff; p[3] = len & 0xff; - dev_dbg(&dev->dev, " encode fixed_io %#llx-%#llx\n", - (unsigned long long) res->start, (unsigned long long) res->end); + dev_dbg(&dev->dev, " encode fixed_io %#lx-%#lx\n", base, + base + len - 1); } static unsigned char *pnpbios_encode_allocated_resource_data(struct pnp_dev diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index 1ff3bb585ab2..21acb54eff6d 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -248,8 +248,7 @@ static void quirk_system_pci_resources(struct pnp_dev *dev) for (j = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, j)); j++) { - if (res->flags & IORESOURCE_UNSET || - (res->start == 0 && res->end == 0)) + if (res->start == 0 && res->end == 0) continue; pnp_start = res->start; diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c index cce341f743d4..0797a77bd042 100644 --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c @@ -237,7 +237,7 @@ void pnp_free_option(struct pnp_option *option) !((*(enda) < *(startb)) || (*(endb) < *(starta))) #define cannot_compare(flags) \ -((flags) & (IORESOURCE_UNSET | IORESOURCE_DISABLED)) +((flags) & IORESOURCE_DISABLED) int pnp_check_port(struct pnp_dev *dev, struct resource *res) { @@ -505,81 +505,31 @@ int pnp_resource_type(struct resource *res) IORESOURCE_IRQ | IORESOURCE_DMA); } -struct pnp_resource *pnp_get_pnp_resource(struct pnp_dev *dev, - unsigned int type, unsigned int num) -{ - struct pnp_resource_table *res = dev->res; - - switch (type) { - case IORESOURCE_IO: - if (num >= PNP_MAX_PORT) - return NULL; - return &res->port[num]; - case IORESOURCE_MEM: - if (num >= PNP_MAX_MEM) - return NULL; - return &res->mem[num]; - case IORESOURCE_IRQ: - if (num >= PNP_MAX_IRQ) - return NULL; - return &res->irq[num]; - case IORESOURCE_DMA: - if (num >= PNP_MAX_DMA) - return NULL; - return &res->dma[num]; - } - return NULL; -} - struct resource *pnp_get_resource(struct pnp_dev *dev, unsigned int type, unsigned int num) { struct pnp_resource *pnp_res; + struct resource *res; - pnp_res = pnp_get_pnp_resource(dev, type, num); - if (pnp_res) - return &pnp_res->res; - + list_for_each_entry(pnp_res, &dev->resources, list) { + res = &pnp_res->res; + if (pnp_resource_type(res) == type && num-- == 0) + return res; + } return NULL; } EXPORT_SYMBOL(pnp_get_resource); -static struct pnp_resource *pnp_new_resource(struct pnp_dev *dev, int type) +static struct pnp_resource *pnp_new_resource(struct pnp_dev *dev) { struct pnp_resource *pnp_res; - int i; - switch (type) { - case IORESOURCE_IO: - for (i = 0; i < PNP_MAX_PORT; i++) { - pnp_res = pnp_get_pnp_resource(dev, IORESOURCE_IO, i); - if (pnp_res && !pnp_resource_valid(&pnp_res->res)) - return pnp_res; - } - break; - case IORESOURCE_MEM: - for (i = 0; i < PNP_MAX_MEM; i++) { - pnp_res = pnp_get_pnp_resource(dev, IORESOURCE_MEM, i); - if (pnp_res && !pnp_resource_valid(&pnp_res->res)) - return pnp_res; - } - break; - case IORESOURCE_IRQ: - for (i = 0; i < PNP_MAX_IRQ; i++) { - pnp_res = pnp_get_pnp_resource(dev, IORESOURCE_IRQ, i); - if (pnp_res && !pnp_resource_valid(&pnp_res->res)) - return pnp_res; - } - break; - case IORESOURCE_DMA: - for (i = 0; i < PNP_MAX_DMA; i++) { - pnp_res = pnp_get_pnp_resource(dev, IORESOURCE_DMA, i); - if (pnp_res && !pnp_resource_valid(&pnp_res->res)) - return pnp_res; - } - break; - } - return NULL; + pnp_res = kzalloc(sizeof(struct pnp_resource), GFP_KERNEL); + if (!pnp_res) + return NULL; + + list_add_tail(&pnp_res->list, &dev->resources); + return pnp_res; } struct pnp_resource *pnp_add_irq_resource(struct pnp_dev *dev, int irq, @@ -589,7 +539,7 @@ struct pnp_resource *pnp_add_irq_resource(struct pnp_dev *dev, int irq, struct resource *res; static unsigned char warned; - pnp_res = pnp_new_resource(dev, IORESOURCE_IRQ); + pnp_res = pnp_new_resource(dev); if (!pnp_res) { if (!warned) { dev_err(&dev->dev, "can't add resource for IRQ %d\n", @@ -615,7 +565,7 @@ struct pnp_resource *pnp_add_dma_resource(struct pnp_dev *dev, int dma, struct resource *res; static unsigned char warned; - pnp_res = pnp_new_resource(dev, IORESOURCE_DMA); + pnp_res = pnp_new_resource(dev); if (!pnp_res) { if (!warned) { dev_err(&dev->dev, "can't add resource for DMA %d\n", @@ -642,7 +592,7 @@ struct pnp_resource *pnp_add_io_resource(struct pnp_dev *dev, struct resource *res; static unsigned char warned; - pnp_res = pnp_new_resource(dev, IORESOURCE_IO); + pnp_res = pnp_new_resource(dev); if (!pnp_res) { if (!warned) { dev_err(&dev->dev, "can't add resource for IO " @@ -671,7 +621,7 @@ struct pnp_resource *pnp_add_mem_resource(struct pnp_dev *dev, struct resource *res; static unsigned char warned; - pnp_res = pnp_new_resource(dev, IORESOURCE_MEM); + pnp_res = pnp_new_resource(dev); if (!pnp_res) { if (!warned) { dev_err(&dev->dev, "can't add resource for MEM " diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c index eb07345f5cf7..1566e4a73849 100644 --- a/drivers/pnp/support.c +++ b/drivers/pnp/support.c @@ -16,6 +16,10 @@ */ int pnp_is_active(struct pnp_dev *dev) { + /* + * I don't think this is very reliable because pnp_disable_dev() + * only clears out auto-assigned resources. + */ if (!pnp_port_start(dev, 0) && pnp_port_len(dev, 0) <= 1 && !pnp_mem_start(dev, 0) && pnp_mem_len(dev, 0) <= 1 && pnp_irq(dev, 0) == -1 && pnp_dma(dev, 0) == -1) @@ -70,54 +74,41 @@ char *pnp_resource_type_name(struct resource *res) void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc) { #ifdef DEBUG + char buf[128]; + int len = 0; + struct pnp_resource *pnp_res; struct resource *res; - int i; dev_dbg(&dev->dev, "current resources: %s\n", desc); + list_for_each_entry(pnp_res, &dev->resources, list) { + res = &pnp_res->res; - for (i = 0; i < PNP_MAX_IRQ; i++) { - res = pnp_get_resource(dev, IORESOURCE_IRQ, i); - if (res && !(res->flags & IORESOURCE_UNSET)) - dev_dbg(&dev->dev, " irq %lld flags %#lx%s%s\n", - (unsigned long long) res->start, res->flags, - res->flags & IORESOURCE_DISABLED ? - " DISABLED" : "", - res->flags & IORESOURCE_AUTO ? - " AUTO" : ""); - } - for (i = 0; i < PNP_MAX_DMA; i++) { - res = pnp_get_resource(dev, IORESOURCE_DMA, i); - if (res && !(res->flags & IORESOURCE_UNSET)) - dev_dbg(&dev->dev, " dma %lld flags %#lx%s%s\n", - (unsigned long long) res->start, res->flags, - res->flags & IORESOURCE_DISABLED ? - " DISABLED" : "", - res->flags & IORESOURCE_AUTO ? - " AUTO" : ""); - } - for (i = 0; i < PNP_MAX_PORT; i++) { - res = pnp_get_resource(dev, IORESOURCE_IO, i); - if (res && !(res->flags & IORESOURCE_UNSET)) - dev_dbg(&dev->dev, " io %#llx-%#llx flags %#lx" - "%s%s\n", - (unsigned long long) res->start, - (unsigned long long) res->end, res->flags, - res->flags & IORESOURCE_DISABLED ? - " DISABLED" : "", - res->flags & IORESOURCE_AUTO ? - " AUTO" : ""); - } - for (i = 0; i < PNP_MAX_MEM; i++) { - res = pnp_get_resource(dev, IORESOURCE_MEM, i); - if (res && !(res->flags & IORESOURCE_UNSET)) - dev_dbg(&dev->dev, " mem %#llx-%#llx flags %#lx" - "%s%s\n", - (unsigned long long) res->start, - (unsigned long long) res->end, res->flags, - res->flags & IORESOURCE_DISABLED ? - " DISABLED" : "", - res->flags & IORESOURCE_AUTO ? - " AUTO" : ""); + len += snprintf(buf + len, sizeof(buf) - len, " %-3s ", + pnp_resource_type_name(res)); + + if (res->flags & IORESOURCE_DISABLED) { + dev_dbg(&dev->dev, "%sdisabled\n", buf); + continue; + } + + switch (pnp_resource_type(res)) { + case IORESOURCE_IO: + case IORESOURCE_MEM: + len += snprintf(buf + len, sizeof(buf) - len, + "%#llx-%#llx flags %#lx", + (unsigned long long) res->start, + (unsigned long long) res->end, + res->flags); + break; + case IORESOURCE_IRQ: + case IORESOURCE_DMA: + len += snprintf(buf + len, sizeof(buf) - len, + "%lld flags %#lx", + (unsigned long long) res->start, + res->flags); + break; + } + dev_dbg(&dev->dev, "%s\n", buf); } #endif } diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c index cf4e07b01d48..764f3a310685 100644 --- a/drivers/pnp/system.c +++ b/drivers/pnp/system.c @@ -60,7 +60,7 @@ static void reserve_resources_of_dev(struct pnp_dev *dev) int i; for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_IO, i)); i++) { - if (res->flags & IORESOURCE_UNSET) + if (res->flags & IORESOURCE_DISABLED) continue; if (res->start == 0) continue; /* disabled */ @@ -81,7 +81,7 @@ static void reserve_resources_of_dev(struct pnp_dev *dev) } for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) { - if (res->flags & (IORESOURCE_UNSET | IORESOURCE_DISABLED)) + if (res->flags & IORESOURCE_DISABLED) continue; reserve_range(dev, res->start, res->end, 0); diff --git a/include/linux/pnp.h b/include/linux/pnp.h index 8b607aecd959..dfaa567e04a8 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -15,7 +15,6 @@ struct pnp_protocol; struct pnp_dev; -struct pnp_resource_table; /* * Resource Management @@ -24,7 +23,14 @@ struct resource *pnp_get_resource(struct pnp_dev *, unsigned int, unsigned int); static inline int pnp_resource_valid(struct resource *res) { - if (res && !(res->flags & IORESOURCE_UNSET)) + if (res) + return 1; + return 0; +} + +static inline int pnp_resource_enabled(struct resource *res) +{ + if (res && !(res->flags & IORESOURCE_DISABLED)) return 1; return 0; } @@ -64,7 +70,7 @@ static inline unsigned long pnp_port_flags(struct pnp_dev *dev, if (pnp_resource_valid(res)) return res->flags; - return IORESOURCE_IO | IORESOURCE_AUTO | IORESOURCE_UNSET; + return IORESOURCE_IO | IORESOURCE_AUTO; } static inline int pnp_port_valid(struct pnp_dev *dev, unsigned int bar) @@ -109,7 +115,7 @@ static inline unsigned long pnp_mem_flags(struct pnp_dev *dev, unsigned int bar) if (pnp_resource_valid(res)) return res->flags; - return IORESOURCE_MEM | IORESOURCE_AUTO | IORESOURCE_UNSET; + return IORESOURCE_MEM | IORESOURCE_AUTO; } static inline int pnp_mem_valid(struct pnp_dev *dev, unsigned int bar) @@ -143,7 +149,7 @@ static inline unsigned long pnp_irq_flags(struct pnp_dev *dev, unsigned int bar) if (pnp_resource_valid(res)) return res->flags; - return IORESOURCE_IRQ | IORESOURCE_AUTO | IORESOURCE_UNSET; + return IORESOURCE_IRQ | IORESOURCE_AUTO; } static inline int pnp_irq_valid(struct pnp_dev *dev, unsigned int bar) @@ -167,7 +173,7 @@ static inline unsigned long pnp_dma_flags(struct pnp_dev *dev, unsigned int bar) if (pnp_resource_valid(res)) return res->flags; - return IORESOURCE_DMA | IORESOURCE_AUTO | IORESOURCE_UNSET; + return IORESOURCE_DMA | IORESOURCE_AUTO; } static inline int pnp_dma_valid(struct pnp_dev *dev, unsigned int bar) @@ -296,7 +302,7 @@ struct pnp_dev { int capabilities; struct pnp_option *independent; struct pnp_option *dependent; - struct pnp_resource_table *res; + struct list_head resources; char name[PNP_NAME_LEN]; /* contains a human-readable name */ int flags; /* used by protocols */ -- cgit v1.2.3 From 5acf91415799025410cc0d13101340d352f34c89 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:56:58 -0600 Subject: PNPACPI: keep disabled resources when parsing current config When we parse a device's _CRS data (the current resource settings), we should keep track of everything we find, even if it's currently disabled or invalid. This is what we already do for ISAPNP and PNPBIOS, and it helps keep things matched up when we subsequently re-encode resources. For example, consider a device with (mem, irq0, irq1, io), where irq0 is disabled. If we drop irq0 when parsing the _CRS, we will mistakenly put irq1 in the irq0 slot when we encode resources for an _SRS call. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/pnp/pnpacpi/rsparser.c | 70 +++++++++++++++++++++++++++++++----------- 1 file changed, 52 insertions(+), 18 deletions(-) diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 9a45c25b46d2..595252b65205 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -98,8 +98,10 @@ static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev, int irq, flags; int p, t; - if (!valid_IRQ(gsi)) + if (!valid_IRQ(gsi)) { + pnp_add_irq_resource(dev, gsi, IORESOURCE_DISABLED); return; + } /* * in IO-APIC mode, use overrided attribute. Two reasons: @@ -248,24 +250,39 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res, * _CRS, but some firmware violates this, so parse them all. */ irq = &res->data.irq; - for (i = 0; i < irq->interrupt_count; i++) { - pnpacpi_parse_allocated_irqresource(dev, - irq->interrupts[i], - irq->triggering, - irq->polarity, - irq->sharable); + if (irq->interrupt_count == 0) + pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED); + else { + for (i = 0; i < irq->interrupt_count; i++) { + pnpacpi_parse_allocated_irqresource(dev, + irq->interrupts[i], + irq->triggering, + irq->polarity, + irq->sharable); + } + + /* + * The IRQ encoder puts a single interrupt in each + * descriptor, so if a _CRS descriptor has more than + * one interrupt, we won't be able to re-encode it. + */ + if (pnp_can_write(dev) && irq->interrupt_count > 1) { + dev_warn(&dev->dev, "multiple interrupts in " + "_CRS descriptor; configuration can't " + "be changed\n"); + dev->capabilities &= ~PNP_WRITE; + } } break; case ACPI_RESOURCE_TYPE_DMA: dma = &res->data.dma; - if (dma->channel_count > 0) { + if (dma->channel_count > 0 && dma->channels[0] != (u8) -1) flags = dma_flags(dma->type, dma->bus_master, dma->transfer); - if (dma->channels[0] == (u8) -1) - flags |= IORESOURCE_DISABLED; - pnp_add_dma_resource(dev, dma->channels[0], flags); - } + else + flags = IORESOURCE_DISABLED; + pnp_add_dma_resource(dev, dma->channels[0], flags); break; case ACPI_RESOURCE_TYPE_IO: @@ -331,12 +348,29 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res, if (extended_irq->producer_consumer == ACPI_PRODUCER) return AE_OK; - for (i = 0; i < extended_irq->interrupt_count; i++) { - pnpacpi_parse_allocated_irqresource(dev, - extended_irq->interrupts[i], - extended_irq->triggering, - extended_irq->polarity, - extended_irq->sharable); + if (extended_irq->interrupt_count == 0) + pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED); + else { + for (i = 0; i < extended_irq->interrupt_count; i++) { + pnpacpi_parse_allocated_irqresource(dev, + extended_irq->interrupts[i], + extended_irq->triggering, + extended_irq->polarity, + extended_irq->sharable); + } + + /* + * The IRQ encoder puts a single interrupt in each + * descriptor, so if a _CRS descriptor has more than + * one interrupt, we won't be able to re-encode it. + */ + if (pnp_can_write(dev) && + extended_irq->interrupt_count > 1) { + dev_warn(&dev->dev, "multiple interrupts in " + "_CRS descriptor; configuration can't " + "be changed\n"); + dev->capabilities &= ~PNP_WRITE; + } } break; -- cgit v1.2.3 From 25d39c39d82d062f4be685146abd054a3bafdf12 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:56:59 -0600 Subject: PNP: remove ratelimit on add resource failures We used to have a fixed-size resource table. If a device had twenty resources when the table only had space for ten, we didn't need ten warnings, so we added the ratelimit. Now that we can dynamically allocate new resources, we should only get failures if the allocation fails. That should be rare enough that we don't need to ratelimit the messages. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/pnp/resource.c | 34 ++++++++-------------------------- 1 file changed, 8 insertions(+), 26 deletions(-) diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c index 0797a77bd042..ff79aa6168cf 100644 --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c @@ -537,15 +537,10 @@ struct pnp_resource *pnp_add_irq_resource(struct pnp_dev *dev, int irq, { struct pnp_resource *pnp_res; struct resource *res; - static unsigned char warned; pnp_res = pnp_new_resource(dev); if (!pnp_res) { - if (!warned) { - dev_err(&dev->dev, "can't add resource for IRQ %d\n", - irq); - warned = 1; - } + dev_err(&dev->dev, "can't add resource for IRQ %d\n", irq); return NULL; } @@ -563,15 +558,10 @@ struct pnp_resource *pnp_add_dma_resource(struct pnp_dev *dev, int dma, { struct pnp_resource *pnp_res; struct resource *res; - static unsigned char warned; pnp_res = pnp_new_resource(dev); if (!pnp_res) { - if (!warned) { - dev_err(&dev->dev, "can't add resource for DMA %d\n", - dma); - warned = 1; - } + dev_err(&dev->dev, "can't add resource for DMA %d\n", dma); return NULL; } @@ -590,16 +580,12 @@ struct pnp_resource *pnp_add_io_resource(struct pnp_dev *dev, { struct pnp_resource *pnp_res; struct resource *res; - static unsigned char warned; pnp_res = pnp_new_resource(dev); if (!pnp_res) { - if (!warned) { - dev_err(&dev->dev, "can't add resource for IO " - "%#llx-%#llx\n",(unsigned long long) start, - (unsigned long long) end); - warned = 1; - } + dev_err(&dev->dev, "can't add resource for IO %#llx-%#llx\n", + (unsigned long long) start, + (unsigned long long) end); return NULL; } @@ -619,16 +605,12 @@ struct pnp_resource *pnp_add_mem_resource(struct pnp_dev *dev, { struct pnp_resource *pnp_res; struct resource *res; - static unsigned char warned; pnp_res = pnp_new_resource(dev); if (!pnp_res) { - if (!warned) { - dev_err(&dev->dev, "can't add resource for MEM " - "%#llx-%#llx\n",(unsigned long long) start, - (unsigned long long) end); - warned = 1; - } + dev_err(&dev->dev, "can't add resource for MEM %#llx-%#llx\n", + (unsigned long long) start, + (unsigned long long) end); return NULL; } -- cgit v1.2.3 From f61ed7e32d2d6a0a8c3c101da513ccedd542e14d Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:00 -0600 Subject: PNP: dont sort by type in /sys/.../resources Rather than stepping through all IO resources, then stepping through all MMIO resources, etc., we can just iterate over the resource list once directly. This can change the order in /sys, e.g., # cat /sys/devices/pnp0/00:07/resources # OLD state = active io 0x3f8-0x3ff irq 4 # cat /sys/devices/pnp0/00:07/resources # NEW state = active irq 4 io 0x3f8-0x3ff The old code artificially sorted resources by type; the new code just lists them in the order we read them from the ISAPNP hardware or the BIOS. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/pnp/interface.c | 56 +++++++++++++++++++------------------------------ 1 file changed, 22 insertions(+), 34 deletions(-) diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c index 7fc86bbed88e..674e8ba0377f 100644 --- a/drivers/pnp/interface.c +++ b/drivers/pnp/interface.c @@ -248,8 +248,9 @@ static ssize_t pnp_show_current_resources(struct device *dmdev, char *buf) { struct pnp_dev *dev = to_pnp_dev(dmdev); + struct pnp_resource *pnp_res; struct resource *res; - int i, ret; + int ret; pnp_info_buffer_t *buffer; if (!dev) @@ -262,46 +263,33 @@ static ssize_t pnp_show_current_resources(struct device *dmdev, buffer->buffer = buf; buffer->curr = buffer->buffer; - pnp_printf(buffer, "state = "); - if (dev->active) - pnp_printf(buffer, "active\n"); - else - pnp_printf(buffer, "disabled\n"); + pnp_printf(buffer, "state = %s\n", dev->active ? "active" : "disabled"); - for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_IO, i)); i++) { - pnp_printf(buffer, "io"); - if (res->flags & IORESOURCE_DISABLED) - pnp_printf(buffer, " disabled\n"); - else - pnp_printf(buffer, " 0x%llx-0x%llx\n", - (unsigned long long) res->start, - (unsigned long long) res->end); - } - for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) { - pnp_printf(buffer, "mem"); - if (res->flags & IORESOURCE_DISABLED) + list_for_each_entry(pnp_res, &dev->resources, list) { + res = &pnp_res->res; + + pnp_printf(buffer, pnp_resource_type_name(res)); + + if (res->flags & IORESOURCE_DISABLED) { pnp_printf(buffer, " disabled\n"); - else - pnp_printf(buffer, " 0x%llx-0x%llx\n", + continue; + } + + switch (pnp_resource_type(res)) { + case IORESOURCE_IO: + case IORESOURCE_MEM: + pnp_printf(buffer, " %#llx-%#llx\n", (unsigned long long) res->start, (unsigned long long) res->end); - } - for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_IRQ, i)); i++) { - pnp_printf(buffer, "irq"); - if (res->flags & IORESOURCE_DISABLED) - pnp_printf(buffer, " disabled\n"); - else - pnp_printf(buffer, " %lld\n", - (unsigned long long) res->start); - } - for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_DMA, i)); i++) { - pnp_printf(buffer, "dma"); - if (res->flags & IORESOURCE_DISABLED) - pnp_printf(buffer, " disabled\n"); - else + break; + case IORESOURCE_IRQ: + case IORESOURCE_DMA: pnp_printf(buffer, " %lld\n", (unsigned long long) res->start); + break; + } } + ret = (buffer->curr - buf); kfree(buffer); return ret; -- cgit v1.2.3 From 57fd51a8be26921b56747ddd09d1d9e01c11c9e0 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:01 -0600 Subject: PNP: add pnp_possible_config() -- can a device could be configured this way? As part of a heuristic to identify modem devices, 8250_pnp.c checks to see whether a device can be configured at any of the legacy COM port addresses. This patch moves the code that traverses the PNP "possible resource options" from 8250_pnp.c to the PNP subsystem. This encapsulation is important because a future patch will change the implementation of those resource options. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/resource.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/serial/8250_pnp.c | 24 ++++++------------ include/linux/pnp.h | 5 ++++ 3 files changed, 74 insertions(+), 17 deletions(-) diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c index ff79aa6168cf..786fd356916d 100644 --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c @@ -624,6 +624,68 @@ struct pnp_resource *pnp_add_mem_resource(struct pnp_dev *dev, return pnp_res; } +static int pnp_possible_option(struct pnp_option *option, int type, + resource_size_t start, resource_size_t size) +{ + struct pnp_option *tmp; + struct pnp_port *port; + struct pnp_mem *mem; + struct pnp_irq *irq; + struct pnp_dma *dma; + + if (!option) + return 0; + + for (tmp = option; tmp; tmp = tmp->next) { + switch (type) { + case IORESOURCE_IO: + for (port = tmp->port; port; port = port->next) { + if (port->min == start && port->size == size) + return 1; + } + break; + case IORESOURCE_MEM: + for (mem = tmp->mem; mem; mem = mem->next) { + if (mem->min == start && mem->size == size) + return 1; + } + break; + case IORESOURCE_IRQ: + for (irq = tmp->irq; irq; irq = irq->next) { + if (start < PNP_IRQ_NR && + test_bit(start, irq->map)) + return 1; + } + break; + case IORESOURCE_DMA: + for (dma = tmp->dma; dma; dma = dma->next) { + if (dma->map & (1 << start)) + return 1; + } + break; + } + } + + return 0; +} + +/* + * Determine whether the specified resource is a possible configuration + * for this device. + */ +int pnp_possible_config(struct pnp_dev *dev, int type, resource_size_t start, + resource_size_t size) +{ + if (pnp_possible_option(dev->independent, type, start, size)) + return 1; + + if (pnp_possible_option(dev->dependent, type, start, size)) + return 1; + + return 0; +} +EXPORT_SYMBOL(pnp_possible_config); + /* format is: pnp_reserve_irq=irq1[,irq2] .... */ static int __init pnp_setup_reserve_irq(char *str) { diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index 97c68d021d28..638b68649e79 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -383,21 +383,14 @@ static int __devinit check_name(char *name) return 0; } -static int __devinit check_resources(struct pnp_option *option) +static int __devinit check_resources(struct pnp_dev *dev) { - struct pnp_option *tmp; - if (!option) - return 0; + resource_size_t base[] = {0x2f8, 0x3f8, 0x2e8, 0x3e8}; + int i; - for (tmp = option; tmp; tmp = tmp->next) { - struct pnp_port *port; - for (port = tmp->port; port; port = port->next) - if ((port->size == 8) && - ((port->min == 0x2f8) || - (port->min == 0x3f8) || - (port->min == 0x2e8) || - (port->min == 0x3e8))) - return 1; + for (i = 0; i < ARRAY_SIZE(base); i++) { + if (pnp_possible_config(dev, IORESOURCE_IO, base[i], 8)) + return 1; } return 0; @@ -420,10 +413,7 @@ static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags) (dev->card && check_name(dev->card->name)))) return -ENODEV; - if (check_resources(dev->independent)) - return 0; - - if (check_resources(dev->dependent)) + if (check_resources(dev)) return 0; return -ENODEV; diff --git a/include/linux/pnp.h b/include/linux/pnp.h index dfaa567e04a8..e033e1b14c27 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -479,6 +479,8 @@ void pnp_unregister_card_driver(struct pnp_card_driver *drv); extern struct list_head pnp_cards; /* resource management */ +int pnp_possible_config(struct pnp_dev *dev, int type, resource_size_t base, + resource_size_t size); int pnp_auto_config_dev(struct pnp_dev *dev); int pnp_start_dev(struct pnp_dev *dev); int pnp_stop_dev(struct pnp_dev *dev); @@ -506,6 +508,9 @@ static inline int pnp_register_card_driver(struct pnp_card_driver *drv) { return static inline void pnp_unregister_card_driver(struct pnp_card_driver *drv) { } /* resource management */ +static inline int pnp_possible_config(struct pnp_dev *dev, int type, + resource_size_t base, + resource_size_t size) { return 0; } static inline int pnp_auto_config_dev(struct pnp_dev *dev) { return -ENODEV; } static inline int pnp_start_dev(struct pnp_dev *dev) { return -ENODEV; } static inline int pnp_stop_dev(struct pnp_dev *dev) { return -ENODEV; } -- cgit v1.2.3 From b72ee1f11e373179ec703e0e5afaf585ed3a950a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:02 -0600 Subject: PNP: whitespace/coding style fixes No functional change; just make a couple declarations consistent with the rest of the file. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/interface.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c index 674e8ba0377f..239923a300cd 100644 --- a/drivers/pnp/interface.c +++ b/drivers/pnp/interface.c @@ -216,12 +216,12 @@ static ssize_t pnp_show_options(struct device *dmdev, struct device_attribute *attr, char *buf) { struct pnp_dev *dev = to_pnp_dev(dmdev); + pnp_info_buffer_t *buffer; struct pnp_option *independent = dev->independent; struct pnp_option *dependent = dev->dependent; int ret, dep = 1; - pnp_info_buffer_t *buffer = (pnp_info_buffer_t *) - pnp_alloc(sizeof(pnp_info_buffer_t)); + buffer = pnp_alloc(sizeof(pnp_info_buffer_t)); if (!buffer) return -ENOMEM; @@ -248,17 +248,18 @@ static ssize_t pnp_show_current_resources(struct device *dmdev, char *buf) { struct pnp_dev *dev = to_pnp_dev(dmdev); + pnp_info_buffer_t *buffer; struct pnp_resource *pnp_res; struct resource *res; int ret; - pnp_info_buffer_t *buffer; if (!dev) return -EINVAL; - buffer = (pnp_info_buffer_t *) pnp_alloc(sizeof(pnp_info_buffer_t)); + buffer = pnp_alloc(sizeof(pnp_info_buffer_t)); if (!buffer) return -ENOMEM; + buffer->len = PAGE_SIZE; buffer->buffer = buf; buffer->curr = buffer->buffer; @@ -295,9 +296,9 @@ static ssize_t pnp_show_current_resources(struct device *dmdev, return ret; } -static ssize_t -pnp_set_current_resources(struct device *dmdev, struct device_attribute *attr, - const char *ubuf, size_t count) +static ssize_t pnp_set_current_resources(struct device *dmdev, + struct device_attribute *attr, + const char *ubuf, size_t count) { struct pnp_dev *dev = to_pnp_dev(dmdev); char *buf = (void *)ubuf; -- cgit v1.2.3 From 08c9f262f268f7948be13bf3a5bda1d635c649b4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:03 -0600 Subject: PNP: define PNP-specific IORESOURCE_IO_* flags alongside IRQ, DMA, MEM PNP previously defined PNP_PORT_FLAG_16BITADDR and PNP_PORT_FLAG_FIXED in a private header file, but put those flags in struct resource.flags fields. Better to make them IORESOURCE_IO_* flags like the existing IRQ, DMA, and MEM flags. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/interface.c | 2 +- drivers/pnp/isapnp/core.c | 4 ++-- drivers/pnp/pnpacpi/rsparser.c | 10 +++++----- drivers/pnp/pnpbios/rsparser.c | 4 ++-- include/linux/ioport.h | 4 ++++ include/linux/pnp.h | 3 --- 6 files changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c index 239923a300cd..c172b6de6b71 100644 --- a/drivers/pnp/interface.c +++ b/drivers/pnp/interface.c @@ -57,7 +57,7 @@ static void pnp_print_port(pnp_info_buffer_t * buffer, char *space, "%sport 0x%x-0x%x, align 0x%x, size 0x%x, %i-bit address decoding\n", space, port->min, port->max, port->align ? (port->align - 1) : 0, port->size, - port->flags & PNP_PORT_FLAG_16BITADDR ? 16 : 10); + port->flags & IORESOURCE_IO_16BIT_ADDR ? 16 : 10); } static void pnp_print_irq(pnp_info_buffer_t * buffer, char *space, diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c index ca4457ec403b..c5b92526963b 100644 --- a/drivers/pnp/isapnp/core.c +++ b/drivers/pnp/isapnp/core.c @@ -486,7 +486,7 @@ static void __init isapnp_parse_port_resource(struct pnp_dev *dev, port->max = (tmp[4] << 8) | tmp[3]; port->align = tmp[5]; port->size = tmp[6]; - port->flags = tmp[0] ? PNP_PORT_FLAG_16BITADDR : 0; + port->flags = tmp[0] ? IORESOURCE_IO_16BIT_ADDR : 0; pnp_register_port_resource(dev, option, port); } @@ -507,7 +507,7 @@ static void __init isapnp_parse_fixed_port_resource(struct pnp_dev *dev, port->min = port->max = (tmp[1] << 8) | tmp[0]; port->size = tmp[2]; port->align = 0; - port->flags = PNP_PORT_FLAG_FIXED; + port->flags = IORESOURCE_IO_FIXED; pnp_register_port_resource(dev, option, port); } diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 595252b65205..46069e64a6b2 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -180,7 +180,7 @@ static void pnpacpi_parse_allocated_ioresource(struct pnp_dev *dev, u64 start, u64 end = start + len - 1; if (io_decode == ACPI_DECODE_16) - flags |= PNP_PORT_FLAG_16BITADDR; + flags |= IORESOURCE_IO_16BIT_ADDR; if (len == 0 || end >= 0x10003) flags |= IORESOURCE_DISABLED; @@ -485,7 +485,7 @@ static __init void pnpacpi_parse_port_option(struct pnp_dev *dev, port->align = io->alignment; port->size = io->address_length; port->flags = ACPI_DECODE_16 == io->io_decode ? - PNP_PORT_FLAG_16BITADDR : 0; + IORESOURCE_IO_16BIT_ADDR : 0; pnp_register_port_resource(dev, option, port); } @@ -503,7 +503,7 @@ static __init void pnpacpi_parse_fixed_port_option(struct pnp_dev *dev, port->min = port->max = io->address; port->size = io->address_length; port->align = 0; - port->flags = PNP_PORT_FLAG_FIXED; + port->flags = IORESOURCE_IO_FIXED; pnp_register_port_resource(dev, option, port); } @@ -609,7 +609,7 @@ static __init void pnpacpi_parse_address_option(struct pnp_dev *dev, port->min = port->max = p->minimum; port->size = p->address_length; port->align = 0; - port->flags = PNP_PORT_FLAG_FIXED; + port->flags = IORESOURCE_IO_FIXED; pnp_register_port_resource(dev, option, port); } } @@ -946,7 +946,7 @@ static void pnpacpi_encode_io(struct pnp_dev *dev, if (pnp_resource_enabled(p)) { /* Note: pnp_assign_port copies pnp_port->flags into p->flags */ - io->io_decode = (p->flags & PNP_PORT_FLAG_16BITADDR) ? + io->io_decode = (p->flags & IORESOURCE_IO_16BIT_ADDR) ? ACPI_DECODE_16 : ACPI_DECODE_10; io->minimum = p->start; io->maximum = p->end; diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c index 01f0c3dd1b08..489fec3b7974 100644 --- a/drivers/pnp/pnpbios/rsparser.c +++ b/drivers/pnp/pnpbios/rsparser.c @@ -310,7 +310,7 @@ static __init void pnpbios_parse_port_option(struct pnp_dev *dev, port->max = (p[5] << 8) | p[4]; port->align = p[6]; port->size = p[7]; - port->flags = p[1] ? PNP_PORT_FLAG_16BITADDR : 0; + port->flags = p[1] ? IORESOURCE_IO_16BIT_ADDR : 0; pnp_register_port_resource(dev, option, port); } @@ -326,7 +326,7 @@ static __init void pnpbios_parse_fixed_port_option(struct pnp_dev *dev, port->min = port->max = (p[2] << 8) | p[1]; port->size = p[3]; port->align = 0; - port->flags = PNP_PORT_FLAG_FIXED; + port->flags = IORESOURCE_IO_FIXED; pnp_register_port_resource(dev, option, port); } diff --git a/include/linux/ioport.h b/include/linux/ioport.h index c6801bffe76d..39db059ffb8b 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -88,6 +88,10 @@ struct resource_list { #define IORESOURCE_MEM_SHADOWABLE (1<<5) /* dup: IORESOURCE_SHADOWABLE */ #define IORESOURCE_MEM_EXPANSIONROM (1<<6) +/* PnP I/O specific bits (IORESOURCE_BITS) */ +#define IORESOURCE_IO_16BIT_ADDR (1<<0) +#define IORESOURCE_IO_FIXED (1<<1) + /* PCI ROM control bits (IORESOURCE_BITS) */ #define IORESOURCE_ROM_ENABLE (1<<0) /* ROM is enabled, same as PCI_ROM_ADDRESS_ENABLE */ #define IORESOURCE_ROM_SHADOW (1<<1) /* ROM is copy at C000:0 */ diff --git a/include/linux/pnp.h b/include/linux/pnp.h index e033e1b14c27..e1454dabde10 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -182,9 +182,6 @@ static inline int pnp_dma_valid(struct pnp_dev *dev, unsigned int bar) } -#define PNP_PORT_FLAG_16BITADDR (1<<0) -#define PNP_PORT_FLAG_FIXED (1<<1) - struct pnp_port { unsigned short min; /* min base number */ unsigned short max; /* max base number */ -- cgit v1.2.3 From a1802c42950403657d07e64558eff612d550ce16 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:04 -0600 Subject: PNP: make resource option structures private to PNP subsystem Nothing outside the PNP subsystem should need access to a device's resource options, so this patch moves the option structure declarations to a private header file. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/base.h | 48 ++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/pnp.h | 48 ------------------------------------------------ 2 files changed, 48 insertions(+), 48 deletions(-) diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h index 1667ac3ca45b..3126e4582008 100644 --- a/drivers/pnp/base.h +++ b/drivers/pnp/base.h @@ -19,6 +19,54 @@ void pnp_remove_card(struct pnp_card *card); int pnp_add_card_device(struct pnp_card *card, struct pnp_dev *dev); void pnp_remove_card_device(struct pnp_dev *dev); +struct pnp_port { + unsigned short min; /* min base number */ + unsigned short max; /* max base number */ + unsigned char align; /* align boundary */ + unsigned char size; /* size of range */ + unsigned char flags; /* port flags */ + unsigned char pad; /* pad */ + struct pnp_port *next; /* next port */ +}; + +#define PNP_IRQ_NR 256 +struct pnp_irq { + DECLARE_BITMAP(map, PNP_IRQ_NR); /* bitmask for IRQ lines */ + unsigned char flags; /* IRQ flags */ + unsigned char pad; /* pad */ + struct pnp_irq *next; /* next IRQ */ +}; + +struct pnp_dma { + unsigned char map; /* bitmask for DMA channels */ + unsigned char flags; /* DMA flags */ + struct pnp_dma *next; /* next port */ +}; + +struct pnp_mem { + unsigned int min; /* min base number */ + unsigned int max; /* max base number */ + unsigned int align; /* align boundary */ + unsigned int size; /* size of range */ + unsigned char flags; /* memory flags */ + unsigned char pad; /* pad */ + struct pnp_mem *next; /* next memory resource */ +}; + +#define PNP_RES_PRIORITY_PREFERRED 0 +#define PNP_RES_PRIORITY_ACCEPTABLE 1 +#define PNP_RES_PRIORITY_FUNCTIONAL 2 +#define PNP_RES_PRIORITY_INVALID 65535 + +struct pnp_option { + unsigned short priority; /* priority */ + struct pnp_port *port; /* first port */ + struct pnp_irq *irq; /* first IRQ */ + struct pnp_dma *dma; /* first DMA */ + struct pnp_mem *mem; /* first memory resource */ + struct pnp_option *next; /* used to chain dependent resources */ +}; + struct pnp_option *pnp_build_option(int priority); struct pnp_option *pnp_register_independent_option(struct pnp_dev *dev); struct pnp_option *pnp_register_dependent_option(struct pnp_dev *dev, diff --git a/include/linux/pnp.h b/include/linux/pnp.h index e1454dabde10..785126ffcc11 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -182,54 +182,6 @@ static inline int pnp_dma_valid(struct pnp_dev *dev, unsigned int bar) } -struct pnp_port { - unsigned short min; /* min base number */ - unsigned short max; /* max base number */ - unsigned char align; /* align boundary */ - unsigned char size; /* size of range */ - unsigned char flags; /* port flags */ - unsigned char pad; /* pad */ - struct pnp_port *next; /* next port */ -}; - -#define PNP_IRQ_NR 256 -struct pnp_irq { - DECLARE_BITMAP(map, PNP_IRQ_NR); /* bitmask for IRQ lines */ - unsigned char flags; /* IRQ flags */ - unsigned char pad; /* pad */ - struct pnp_irq *next; /* next IRQ */ -}; - -struct pnp_dma { - unsigned char map; /* bitmask for DMA channels */ - unsigned char flags; /* DMA flags */ - struct pnp_dma *next; /* next port */ -}; - -struct pnp_mem { - unsigned int min; /* min base number */ - unsigned int max; /* max base number */ - unsigned int align; /* align boundary */ - unsigned int size; /* size of range */ - unsigned char flags; /* memory flags */ - unsigned char pad; /* pad */ - struct pnp_mem *next; /* next memory resource */ -}; - -#define PNP_RES_PRIORITY_PREFERRED 0 -#define PNP_RES_PRIORITY_ACCEPTABLE 1 -#define PNP_RES_PRIORITY_FUNCTIONAL 2 -#define PNP_RES_PRIORITY_INVALID 65535 - -struct pnp_option { - unsigned short priority; /* priority */ - struct pnp_port *port; /* first port */ - struct pnp_irq *irq; /* first IRQ */ - struct pnp_dma *dma; /* first DMA */ - struct pnp_mem *mem; /* first memory resource */ - struct pnp_option *next; /* used to chain dependent resources */ -}; - /* * Device Management */ -- cgit v1.2.3 From 7aefff51854ccd33599c40b4e360d94cb2b7622f Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:05 -0600 Subject: PNP: introduce pnp_irq_mask_t typedef This adds a typedef for the IRQ bitmap, which should cause no functional change, but will make it easier to pass a pointer to a bitmap to pnp_register_irq_resource(). Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/base.h | 4 +++- drivers/pnp/interface.c | 4 ++-- drivers/pnp/isapnp/core.c | 2 +- drivers/pnp/manager.c | 6 +++--- drivers/pnp/pnpacpi/rsparser.c | 4 ++-- drivers/pnp/pnpbios/rsparser.c | 2 +- drivers/pnp/quirks.c | 11 +++++++---- drivers/pnp/resource.c | 6 +++--- 8 files changed, 22 insertions(+), 17 deletions(-) diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h index 3126e4582008..a9ee0a9fec77 100644 --- a/drivers/pnp/base.h +++ b/drivers/pnp/base.h @@ -30,8 +30,10 @@ struct pnp_port { }; #define PNP_IRQ_NR 256 +typedef struct { DECLARE_BITMAP(bits, PNP_IRQ_NR); } pnp_irq_mask_t; + struct pnp_irq { - DECLARE_BITMAP(map, PNP_IRQ_NR); /* bitmask for IRQ lines */ + pnp_irq_mask_t map; /* bitmap for IRQ lines */ unsigned char flags; /* IRQ flags */ unsigned char pad; /* pad */ struct pnp_irq *next; /* next IRQ */ diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c index c172b6de6b71..249b4078d1ec 100644 --- a/drivers/pnp/interface.c +++ b/drivers/pnp/interface.c @@ -67,7 +67,7 @@ static void pnp_print_irq(pnp_info_buffer_t * buffer, char *space, pnp_printf(buffer, "%sirq ", space); for (i = 0; i < PNP_IRQ_NR; i++) - if (test_bit(i, irq->map)) { + if (test_bit(i, irq->map.bits)) { if (!first) { pnp_printf(buffer, ","); } else { @@ -78,7 +78,7 @@ static void pnp_print_irq(pnp_info_buffer_t * buffer, char *space, else pnp_printf(buffer, "%i", i); } - if (bitmap_empty(irq->map, PNP_IRQ_NR)) + if (bitmap_empty(irq->map.bits, PNP_IRQ_NR)) pnp_printf(buffer, ""); if (irq->flags & IORESOURCE_IRQ_HIGHEDGE) pnp_printf(buffer, " High-Edge"); diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c index c5b92526963b..e0caa71b16c0 100644 --- a/drivers/pnp/isapnp/core.c +++ b/drivers/pnp/isapnp/core.c @@ -441,7 +441,7 @@ static void __init isapnp_parse_irq_resource(struct pnp_dev *dev, if (!irq) return; bits = (tmp[1] << 8) | tmp[0]; - bitmap_copy(irq->map, &bits, 16); + bitmap_copy(irq->map.bits, &bits, 16); if (size > 2) irq->flags = tmp[2]; else diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c index 165b624081ad..e758dd225576 100644 --- a/drivers/pnp/manager.c +++ b/drivers/pnp/manager.c @@ -128,20 +128,20 @@ static int pnp_assign_irq(struct pnp_dev *dev, struct pnp_irq *rule, int idx) res->start = -1; res->end = -1; - if (bitmap_empty(rule->map, PNP_IRQ_NR)) { + if (bitmap_empty(rule->map.bits, PNP_IRQ_NR)) { res->flags |= IORESOURCE_DISABLED; dev_dbg(&dev->dev, " irq %d disabled\n", idx); goto __add; } /* TBD: need check for >16 IRQ */ - res->start = find_next_bit(rule->map, PNP_IRQ_NR, 16); + res->start = find_next_bit(rule->map.bits, PNP_IRQ_NR, 16); if (res->start < PNP_IRQ_NR) { res->end = res->start; goto __add; } for (i = 0; i < 16; i++) { - if (test_bit(xtab[i], rule->map)) { + if (test_bit(xtab[i], rule->map.bits)) { res->start = res->end = xtab[i]; if (pnp_check_irq(dev, res)) goto __add; diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 46069e64a6b2..ae65454a23bb 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -442,7 +442,7 @@ static __init void pnpacpi_parse_irq_option(struct pnp_dev *dev, for (i = 0; i < p->interrupt_count; i++) if (p->interrupts[i]) - __set_bit(p->interrupts[i], irq->map); + __set_bit(p->interrupts[i], irq->map.bits); irq->flags = irq_flags(p->triggering, p->polarity, p->sharable); pnp_register_irq_resource(dev, option, irq); @@ -463,7 +463,7 @@ static __init void pnpacpi_parse_ext_irq_option(struct pnp_dev *dev, for (i = 0; i < p->interrupt_count; i++) if (p->interrupts[i]) - __set_bit(p->interrupts[i], irq->map); + __set_bit(p->interrupts[i], irq->map.bits); irq->flags = irq_flags(p->triggering, p->polarity, p->sharable); pnp_register_irq_resource(dev, option, irq); diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c index 489fec3b7974..dd2ea7b03605 100644 --- a/drivers/pnp/pnpbios/rsparser.c +++ b/drivers/pnp/pnpbios/rsparser.c @@ -275,7 +275,7 @@ static __init void pnpbios_parse_irq_option(struct pnp_dev *dev, if (!irq) return; bits = (p[2] << 8) | p[1]; - bitmap_copy(irq->map, &bits, 16); + bitmap_copy(irq->map.bits, &bits, 16); if (size > 2) irq->flags = p[3]; else diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index 21acb54eff6d..48e60171b3ba 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -66,15 +66,18 @@ static void quirk_cmi8330_resources(struct pnp_dev *dev) struct pnp_irq *irq; struct pnp_dma *dma; - for (irq = res->irq; irq; irq = irq->next) { // Valid irqs are 5, 7, 10 + for (irq = res->irq; irq; irq = irq->next) { + /* Valid irqs are 5, 7, 10 */ tmp = 0x04A0; - bitmap_copy(irq->map, &tmp, 16); // 0000 0100 1010 0000 + bitmap_copy(irq->map.bits, &tmp, 16); } - for (dma = res->dma; dma; dma = dma->next) // Valid 8bit dma channels are 1,3 + for (dma = res->dma; dma; dma = dma->next) { + /* Valid 8bit dma channels are 1,3 */ if ((dma->flags & IORESOURCE_DMA_TYPE_MASK) == IORESOURCE_DMA_8BIT) dma->map = 0x000A; + } } dev_info(&dev->dev, "CMI8330 quirk - forced possible IRQs to 5, 7, 10 " "and DMA channels to 1, 3\n"); @@ -187,7 +190,7 @@ static void quirk_ad1815_mpu_resources(struct pnp_dev *dev) if (!copy) break; - memcpy(copy->map, irq->map, sizeof copy->map); + bitmap_copy(copy->map.bits, irq->map.bits, PNP_IRQ_NR); copy->flags = irq->flags; copy->next = res->irq; /* Yes, this is NULL */ diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c index 786fd356916d..55a57cded24a 100644 --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c @@ -98,13 +98,13 @@ int pnp_register_irq_resource(struct pnp_dev *dev, struct pnp_option *option, int i; for (i = 0; i < 16; i++) - if (test_bit(i, data->map)) + if (test_bit(i, data->map.bits)) pcibios_penalize_isa_irq(i, 0); } #endif #ifdef DEBUG - bitmap_scnprintf(buf, sizeof(buf), data->map, PNP_IRQ_NR); + bitmap_scnprintf(buf, sizeof(buf), data->map.bits, PNP_IRQ_NR); dev_dbg(&dev->dev, " irq bitmask %s flags %#x\n", buf, data->flags); #endif @@ -653,7 +653,7 @@ static int pnp_possible_option(struct pnp_option *option, int type, case IORESOURCE_IRQ: for (irq = tmp->irq; irq; irq = irq->next) { if (start < PNP_IRQ_NR && - test_bit(start, irq->map)) + test_bit(start, irq->map.bits)) return 1; } break; -- cgit v1.2.3 From 169aaffe885c56745188e7913f212a67beaa3b80 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:06 -0600 Subject: PNP: increase I/O port & memory option address sizes ACPI Address Space Descriptors can be up to 64 bits wide. We should keep track of the whole thing when parsing resource options, so this patch changes PNP port and mem option fields from "unsigned short" and "unsigned int" to "resource_size_t". Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/base.h | 16 ++++++++-------- drivers/pnp/interface.c | 17 +++++++++++------ drivers/pnp/resource.c | 14 ++++++++++---- 3 files changed, 29 insertions(+), 18 deletions(-) diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h index a9ee0a9fec77..afbeee5b8af6 100644 --- a/drivers/pnp/base.h +++ b/drivers/pnp/base.h @@ -20,10 +20,10 @@ int pnp_add_card_device(struct pnp_card *card, struct pnp_dev *dev); void pnp_remove_card_device(struct pnp_dev *dev); struct pnp_port { - unsigned short min; /* min base number */ - unsigned short max; /* max base number */ - unsigned char align; /* align boundary */ - unsigned char size; /* size of range */ + resource_size_t min; /* min base number */ + resource_size_t max; /* max base number */ + resource_size_t align; /* align boundary */ + resource_size_t size; /* size of range */ unsigned char flags; /* port flags */ unsigned char pad; /* pad */ struct pnp_port *next; /* next port */ @@ -46,10 +46,10 @@ struct pnp_dma { }; struct pnp_mem { - unsigned int min; /* min base number */ - unsigned int max; /* max base number */ - unsigned int align; /* align boundary */ - unsigned int size; /* size of range */ + resource_size_t min; /* min base number */ + resource_size_t max; /* max base number */ + resource_size_t align; /* align boundary */ + resource_size_t size; /* size of range */ unsigned char flags; /* memory flags */ unsigned char pad; /* pad */ struct pnp_mem *next; /* next memory resource */ diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c index 249b4078d1ec..b09f67de13d0 100644 --- a/drivers/pnp/interface.c +++ b/drivers/pnp/interface.c @@ -53,10 +53,12 @@ static int pnp_printf(pnp_info_buffer_t * buffer, char *fmt, ...) static void pnp_print_port(pnp_info_buffer_t * buffer, char *space, struct pnp_port *port) { - pnp_printf(buffer, - "%sport 0x%x-0x%x, align 0x%x, size 0x%x, %i-bit address decoding\n", - space, port->min, port->max, - port->align ? (port->align - 1) : 0, port->size, + pnp_printf(buffer, "%sport %#llx-%#llx, align %#llx, size %#llx, " + "%i-bit address decoding\n", space, + (unsigned long long) port->min, + (unsigned long long) port->max, + port->align ? ((unsigned long long) port->align - 1) : 0, + (unsigned long long) port->size, port->flags & IORESOURCE_IO_16BIT_ADDR ? 16 : 10); } @@ -148,8 +150,11 @@ static void pnp_print_mem(pnp_info_buffer_t * buffer, char *space, { char *s; - pnp_printf(buffer, "%sMemory 0x%x-0x%x, align 0x%x, size 0x%x", - space, mem->min, mem->max, mem->align, mem->size); + pnp_printf(buffer, "%sMemory %#llx-%#llx, align %#llx, size %#llx", + space, (unsigned long long) mem->min, + (unsigned long long) mem->max, + (unsigned long long) mem->align, + (unsigned long long) mem->size); if (mem->flags & IORESOURCE_MEM_WRITEABLE) pnp_printf(buffer, ", writeable"); if (mem->flags & IORESOURCE_MEM_CACHEABLE) diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c index 55a57cded24a..391828c7f207 100644 --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c @@ -143,8 +143,11 @@ int pnp_register_port_resource(struct pnp_dev *dev, struct pnp_option *option, option->port = data; dev_dbg(&dev->dev, " io " - "min %#x max %#x align %d size %d flags %#x\n", - data->min, data->max, data->align, data->size, data->flags); + "min %#llx max %#llx align %lld size %lld flags %#x\n", + (unsigned long long) data->min, + (unsigned long long) data->max, + (unsigned long long) data->align, + (unsigned long long) data->size, data->flags); return 0; } @@ -162,8 +165,11 @@ int pnp_register_mem_resource(struct pnp_dev *dev, struct pnp_option *option, option->mem = data; dev_dbg(&dev->dev, " mem " - "min %#x max %#x align %d size %d flags %#x\n", - data->min, data->max, data->align, data->size, data->flags); + "min %#llx max %#llx align %lld size %lld flags %#x\n", + (unsigned long long) data->min, + (unsigned long long) data->max, + (unsigned long long) data->align, + (unsigned long long) data->size, data->flags); return 0; } -- cgit v1.2.3 From fcfb7ce3d688d5c15fc9bc0a2a48e1ededdb046f Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:07 -0600 Subject: PNP: improve resource assignment debug When we fail to assign an I/O or MEM resource, include the min/max in the debug output to help match it with the options. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/manager.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c index e758dd225576..c706dd2ddb02 100644 --- a/drivers/pnp/manager.c +++ b/drivers/pnp/manager.c @@ -47,7 +47,10 @@ static int pnp_assign_port(struct pnp_dev *dev, struct pnp_port *rule, int idx) res->start += rule->align; res->end = res->start + rule->size - 1; if (res->start > rule->max || !rule->align) { - dev_dbg(&dev->dev, " couldn't assign io %d\n", idx); + dev_dbg(&dev->dev, " couldn't assign io %d " + "(min %#llx max %#llx)\n", idx, + (unsigned long long) rule->min, + (unsigned long long) rule->max); return 0; } } @@ -96,7 +99,10 @@ static int pnp_assign_mem(struct pnp_dev *dev, struct pnp_mem *rule, int idx) res->start += rule->align; res->end = res->start + rule->size - 1; if (res->start > rule->max || !rule->align) { - dev_dbg(&dev->dev, " couldn't assign mem %d\n", idx); + dev_dbg(&dev->dev, " couldn't assign mem %d " + "(min %#llx max %#llx)\n", idx, + (unsigned long long) rule->min, + (unsigned long long) rule->max); return 0; } } -- cgit v1.2.3 From 819beac3806a5e986d81f476b999b7fffce1a233 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:08 -0600 Subject: PNP: in debug resource dump, make empty list obvious If the resource list is empty, say that explicitly. Previously, it was confusing because often the heading was followed by zero resource lines, then some "add resource" lines from auto-assignment, so the "add" lines looked like current resources. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/support.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c index 1566e4a73849..0ad42db94884 100644 --- a/drivers/pnp/support.c +++ b/drivers/pnp/support.c @@ -79,7 +79,12 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc) struct pnp_resource *pnp_res; struct resource *res; - dev_dbg(&dev->dev, "current resources: %s\n", desc); + if (list_empty(&dev->resources)) { + dev_dbg(&dev->dev, "%s: no current resources\n", desc); + return; + } + + dev_dbg(&dev->dev, "%s: current resources:\n", desc); list_for_each_entry(pnp_res, &dev->resources, list) { res = &pnp_res->res; -- cgit v1.2.3 From 6e906f0e1c8633ed357a64e9861f1822789bee3d Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:09 -0600 Subject: PNP: make resource assignment functions return 0 (success) or -EBUSY (failure) This patch doesn't change any behavior; it just makes the return values more conventional. This changes pnp_assign_dma() from a void function to one that returns an int, just like the other assignment functions. For now, at least, pnp_assign_dma() always returns 0 (success), so it appears to never fail, just like before. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/manager.c | 41 ++++++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 19 deletions(-) diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c index c706dd2ddb02..1adc83fdabb6 100644 --- a/drivers/pnp/manager.c +++ b/drivers/pnp/manager.c @@ -26,7 +26,7 @@ static int pnp_assign_port(struct pnp_dev *dev, struct pnp_port *rule, int idx) dev_dbg(&dev->dev, " io %d already set to %#llx-%#llx " "flags %#lx\n", idx, (unsigned long long) res->start, (unsigned long long) res->end, res->flags); - return 1; + return 0; } res = &local_res; @@ -51,13 +51,13 @@ static int pnp_assign_port(struct pnp_dev *dev, struct pnp_port *rule, int idx) "(min %#llx max %#llx)\n", idx, (unsigned long long) rule->min, (unsigned long long) rule->max); - return 0; + return -EBUSY; } } __add: pnp_add_io_resource(dev, res->start, res->end, res->flags); - return 1; + return 0; } static int pnp_assign_mem(struct pnp_dev *dev, struct pnp_mem *rule, int idx) @@ -69,7 +69,7 @@ static int pnp_assign_mem(struct pnp_dev *dev, struct pnp_mem *rule, int idx) dev_dbg(&dev->dev, " mem %d already set to %#llx-%#llx " "flags %#lx\n", idx, (unsigned long long) res->start, (unsigned long long) res->end, res->flags); - return 1; + return 0; } res = &local_res; @@ -103,13 +103,13 @@ static int pnp_assign_mem(struct pnp_dev *dev, struct pnp_mem *rule, int idx) "(min %#llx max %#llx)\n", idx, (unsigned long long) rule->min, (unsigned long long) rule->max); - return 0; + return -EBUSY; } } __add: pnp_add_mem_resource(dev, res->start, res->end, res->flags); - return 1; + return 0; } static int pnp_assign_irq(struct pnp_dev *dev, struct pnp_irq *rule, int idx) @@ -126,7 +126,7 @@ static int pnp_assign_irq(struct pnp_dev *dev, struct pnp_irq *rule, int idx) if (res) { dev_dbg(&dev->dev, " irq %d already set to %d flags %#lx\n", idx, (int) res->start, res->flags); - return 1; + return 0; } res = &local_res; @@ -154,14 +154,14 @@ static int pnp_assign_irq(struct pnp_dev *dev, struct pnp_irq *rule, int idx) } } dev_dbg(&dev->dev, " couldn't assign irq %d\n", idx); - return 0; + return -EBUSY; __add: pnp_add_irq_resource(dev, res->start, res->flags); - return 1; + return 0; } -static void pnp_assign_dma(struct pnp_dev *dev, struct pnp_dma *rule, int idx) +static int pnp_assign_dma(struct pnp_dev *dev, struct pnp_dma *rule, int idx) { struct resource *res, local_res; int i; @@ -175,7 +175,7 @@ static void pnp_assign_dma(struct pnp_dev *dev, struct pnp_dma *rule, int idx) if (res) { dev_dbg(&dev->dev, " dma %d already set to %d flags %#lx\n", idx, (int) res->start, res->flags); - return; + return 0; } res = &local_res; @@ -198,6 +198,7 @@ static void pnp_assign_dma(struct pnp_dev *dev, struct pnp_dma *rule, int idx) __add: pnp_add_dma_resource(dev, res->start, res->flags); + return 0; } void pnp_init_resources(struct pnp_dev *dev) @@ -243,25 +244,26 @@ static int pnp_assign_resources(struct pnp_dev *dev, int depnum) irq = dev->independent->irq; dma = dev->independent->dma; while (port) { - if (!pnp_assign_port(dev, port, nport)) + if (pnp_assign_port(dev, port, nport) < 0) goto fail; nport++; port = port->next; } while (mem) { - if (!pnp_assign_mem(dev, mem, nmem)) + if (pnp_assign_mem(dev, mem, nmem) < 0) goto fail; nmem++; mem = mem->next; } while (irq) { - if (!pnp_assign_irq(dev, irq, nirq)) + if (pnp_assign_irq(dev, irq, nirq) < 0) goto fail; nirq++; irq = irq->next; } while (dma) { - pnp_assign_dma(dev, dma, ndma); + if (pnp_assign_dma(dev, dma, ndma) < 0) + goto fail; ndma++; dma = dma->next; } @@ -281,25 +283,26 @@ static int pnp_assign_resources(struct pnp_dev *dev, int depnum) irq = dep->irq; dma = dep->dma; while (port) { - if (!pnp_assign_port(dev, port, nport)) + if (pnp_assign_port(dev, port, nport) < 0) goto fail; nport++; port = port->next; } while (mem) { - if (!pnp_assign_mem(dev, mem, nmem)) + if (pnp_assign_mem(dev, mem, nmem) < 0) goto fail; nmem++; mem = mem->next; } while (irq) { - if (!pnp_assign_irq(dev, irq, nirq)) + if (pnp_assign_irq(dev, irq, nirq) < 0) goto fail; nirq++; irq = irq->next; } while (dma) { - pnp_assign_dma(dev, dma, ndma); + if (pnp_assign_dma(dev, dma, ndma) < 0) + goto fail; ndma++; dma = dma->next; } -- cgit v1.2.3 From b08395e5038e3337bb85c7246a635a3be6d5a29c Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:10 -0600 Subject: PNP: remove redundant pnp_can_configure() check pnp_assign_resources() is static and the only caller checks pnp_can_configure() before calling it, so no need to do it again. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/manager.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c index 1adc83fdabb6..7ea9e1e28003 100644 --- a/drivers/pnp/manager.c +++ b/drivers/pnp/manager.c @@ -231,9 +231,6 @@ static int pnp_assign_resources(struct pnp_dev *dev, int depnum) struct pnp_dma *dma; int nport = 0, nmem = 0, nirq = 0, ndma = 0; - if (!pnp_can_configure(dev)) - return -ENODEV; - dbg_pnp_show_resources(dev, "before pnp_assign_resources"); mutex_lock(&pnp_res_mutex); pnp_clean_resource_table(dev); -- cgit v1.2.3 From c227536b4cc2600fc9d22ba0067f699165f6621f Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:11 -0600 Subject: PNP: centralize resource option allocations This patch moves all the option allocations (pnp_mem, pnp_port, etc) into the pnp_register_{mem,port,irq,dma}_resource() functions. This will make it easier to rework the option data structures. The non-trivial part of this patch is the IRQ handling. The backends have to allocate a local pnp_irq_mask_t bitmap, populate it, and pass a pointer to pnp_register_irq_resource(). Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/base.h | 12 ++-- drivers/pnp/isapnp/core.c | 112 +++++++++++++------------------ drivers/pnp/pnpacpi/rsparser.c | 149 ++++++++++++++--------------------------- drivers/pnp/pnpbios/rsparser.c | 120 ++++++++++++++------------------- drivers/pnp/resource.c | 54 ++++++++++++--- 5 files changed, 198 insertions(+), 249 deletions(-) diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h index afbeee5b8af6..360c6385686c 100644 --- a/drivers/pnp/base.h +++ b/drivers/pnp/base.h @@ -74,13 +74,17 @@ struct pnp_option *pnp_register_independent_option(struct pnp_dev *dev); struct pnp_option *pnp_register_dependent_option(struct pnp_dev *dev, int priority); int pnp_register_irq_resource(struct pnp_dev *dev, struct pnp_option *option, - struct pnp_irq *data); + pnp_irq_mask_t *map, unsigned char flags); int pnp_register_dma_resource(struct pnp_dev *dev, struct pnp_option *option, - struct pnp_dma *data); + unsigned char map, unsigned char flags); int pnp_register_port_resource(struct pnp_dev *dev, struct pnp_option *option, - struct pnp_port *data); + resource_size_t min, resource_size_t max, + resource_size_t align, resource_size_t size, + unsigned char flags); int pnp_register_mem_resource(struct pnp_dev *dev, struct pnp_option *option, - struct pnp_mem *data); + resource_size_t min, resource_size_t max, + resource_size_t align, resource_size_t size, + unsigned char flags); void pnp_init_resources(struct pnp_dev *dev); void pnp_fixup_device(struct pnp_dev *dev); diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c index e0caa71b16c0..3f75fdbe6098 100644 --- a/drivers/pnp/isapnp/core.c +++ b/drivers/pnp/isapnp/core.c @@ -433,20 +433,20 @@ static void __init isapnp_parse_irq_resource(struct pnp_dev *dev, int size) { unsigned char tmp[3]; - struct pnp_irq *irq; unsigned long bits; + pnp_irq_mask_t map; + unsigned char flags = IORESOURCE_IRQ_HIGHEDGE; isapnp_peek(tmp, size); - irq = kzalloc(sizeof(struct pnp_irq), GFP_KERNEL); - if (!irq) - return; bits = (tmp[1] << 8) | tmp[0]; - bitmap_copy(irq->map.bits, &bits, 16); + + bitmap_zero(map.bits, PNP_IRQ_NR); + bitmap_copy(map.bits, &bits, 16); + if (size > 2) - irq->flags = tmp[2]; - else - irq->flags = IORESOURCE_IRQ_HIGHEDGE; - pnp_register_irq_resource(dev, option, irq); + flags = tmp[2]; + + pnp_register_irq_resource(dev, option, &map, flags); } /* @@ -457,15 +457,9 @@ static void __init isapnp_parse_dma_resource(struct pnp_dev *dev, int size) { unsigned char tmp[2]; - struct pnp_dma *dma; isapnp_peek(tmp, size); - dma = kzalloc(sizeof(struct pnp_dma), GFP_KERNEL); - if (!dma) - return; - dma->map = tmp[0]; - dma->flags = tmp[1]; - pnp_register_dma_resource(dev, option, dma); + pnp_register_dma_resource(dev, option, tmp[0], tmp[1]); } /* @@ -476,18 +470,16 @@ static void __init isapnp_parse_port_resource(struct pnp_dev *dev, int size) { unsigned char tmp[7]; - struct pnp_port *port; + resource_size_t min, max, align, len; + unsigned char flags; isapnp_peek(tmp, size); - port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL); - if (!port) - return; - port->min = (tmp[2] << 8) | tmp[1]; - port->max = (tmp[4] << 8) | tmp[3]; - port->align = tmp[5]; - port->size = tmp[6]; - port->flags = tmp[0] ? IORESOURCE_IO_16BIT_ADDR : 0; - pnp_register_port_resource(dev, option, port); + min = (tmp[2] << 8) | tmp[1]; + max = (tmp[4] << 8) | tmp[3]; + align = tmp[5]; + len = tmp[6]; + flags = tmp[0] ? IORESOURCE_IO_16BIT_ADDR : 0; + pnp_register_port_resource(dev, option, min, max, align, len, flags); } /* @@ -498,17 +490,13 @@ static void __init isapnp_parse_fixed_port_resource(struct pnp_dev *dev, int size) { unsigned char tmp[3]; - struct pnp_port *port; + resource_size_t base, len; isapnp_peek(tmp, size); - port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL); - if (!port) - return; - port->min = port->max = (tmp[1] << 8) | tmp[0]; - port->size = tmp[2]; - port->align = 0; - port->flags = IORESOURCE_IO_FIXED; - pnp_register_port_resource(dev, option, port); + base = (tmp[1] << 8) | tmp[0]; + len = tmp[2]; + pnp_register_port_resource(dev, option, base, base, 0, len, + IORESOURCE_IO_FIXED); } /* @@ -519,18 +507,16 @@ static void __init isapnp_parse_mem_resource(struct pnp_dev *dev, int size) { unsigned char tmp[9]; - struct pnp_mem *mem; + resource_size_t min, max, align, len; + unsigned char flags; isapnp_peek(tmp, size); - mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); - if (!mem) - return; - mem->min = ((tmp[2] << 8) | tmp[1]) << 8; - mem->max = ((tmp[4] << 8) | tmp[3]) << 8; - mem->align = (tmp[6] << 8) | tmp[5]; - mem->size = ((tmp[8] << 8) | tmp[7]) << 8; - mem->flags = tmp[0]; - pnp_register_mem_resource(dev, option, mem); + min = ((tmp[2] << 8) | tmp[1]) << 8; + max = ((tmp[4] << 8) | tmp[3]) << 8; + align = (tmp[6] << 8) | tmp[5]; + len = ((tmp[8] << 8) | tmp[7]) << 8; + flags = tmp[0]; + pnp_register_mem_resource(dev, option, min, max, align, len, flags); } /* @@ -541,20 +527,16 @@ static void __init isapnp_parse_mem32_resource(struct pnp_dev *dev, int size) { unsigned char tmp[17]; - struct pnp_mem *mem; + resource_size_t min, max, align, len; + unsigned char flags; isapnp_peek(tmp, size); - mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); - if (!mem) - return; - mem->min = (tmp[4] << 24) | (tmp[3] << 16) | (tmp[2] << 8) | tmp[1]; - mem->max = (tmp[8] << 24) | (tmp[7] << 16) | (tmp[6] << 8) | tmp[5]; - mem->align = - (tmp[12] << 24) | (tmp[11] << 16) | (tmp[10] << 8) | tmp[9]; - mem->size = - (tmp[16] << 24) | (tmp[15] << 16) | (tmp[14] << 8) | tmp[13]; - mem->flags = tmp[0]; - pnp_register_mem_resource(dev, option, mem); + min = (tmp[4] << 24) | (tmp[3] << 16) | (tmp[2] << 8) | tmp[1]; + max = (tmp[8] << 24) | (tmp[7] << 16) | (tmp[6] << 8) | tmp[5]; + align = (tmp[12] << 24) | (tmp[11] << 16) | (tmp[10] << 8) | tmp[9]; + len = (tmp[16] << 24) | (tmp[15] << 16) | (tmp[14] << 8) | tmp[13]; + flags = tmp[0]; + pnp_register_mem_resource(dev, option, min, max, align, len, flags); } /* @@ -565,18 +547,14 @@ static void __init isapnp_parse_fixed_mem32_resource(struct pnp_dev *dev, int size) { unsigned char tmp[9]; - struct pnp_mem *mem; + resource_size_t base, len; + unsigned char flags; isapnp_peek(tmp, size); - mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); - if (!mem) - return; - mem->min = mem->max = - (tmp[4] << 24) | (tmp[3] << 16) | (tmp[2] << 8) | tmp[1]; - mem->size = (tmp[8] << 24) | (tmp[7] << 16) | (tmp[6] << 8) | tmp[5]; - mem->align = 0; - mem->flags = tmp[0]; - pnp_register_mem_resource(dev, option, mem); + base = (tmp[4] << 24) | (tmp[3] << 16) | (tmp[2] << 8) | tmp[1]; + len = (tmp[8] << 24) | (tmp[7] << 16) | (tmp[6] << 8) | tmp[5]; + flags = tmp[0]; + pnp_register_mem_resource(dev, option, base, base, 0, len, flags); } /* diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index ae65454a23bb..3aaf406b67b8 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -411,20 +411,16 @@ static __init void pnpacpi_parse_dma_option(struct pnp_dev *dev, struct acpi_resource_dma *p) { int i; - struct pnp_dma *dma; + unsigned char map = 0, flags; if (p->channel_count == 0) return; - dma = kzalloc(sizeof(struct pnp_dma), GFP_KERNEL); - if (!dma) - return; for (i = 0; i < p->channel_count; i++) - dma->map |= 1 << p->channels[i]; - - dma->flags = dma_flags(p->type, p->bus_master, p->transfer); + map |= 1 << p->channels[i]; - pnp_register_dma_resource(dev, option, dma); + flags = dma_flags(p->type, p->bus_master, p->transfer); + pnp_register_dma_resource(dev, option, map, flags); } static __init void pnpacpi_parse_irq_option(struct pnp_dev *dev, @@ -432,20 +428,19 @@ static __init void pnpacpi_parse_irq_option(struct pnp_dev *dev, struct acpi_resource_irq *p) { int i; - struct pnp_irq *irq; + pnp_irq_mask_t map; + unsigned char flags; if (p->interrupt_count == 0) return; - irq = kzalloc(sizeof(struct pnp_irq), GFP_KERNEL); - if (!irq) - return; + bitmap_zero(map.bits, PNP_IRQ_NR); for (i = 0; i < p->interrupt_count; i++) if (p->interrupts[i]) - __set_bit(p->interrupts[i], irq->map.bits); - irq->flags = irq_flags(p->triggering, p->polarity, p->sharable); + __set_bit(p->interrupts[i], map.bits); - pnp_register_irq_resource(dev, option, irq); + flags = irq_flags(p->triggering, p->polarity, p->sharable); + pnp_register_irq_resource(dev, option, &map, flags); } static __init void pnpacpi_parse_ext_irq_option(struct pnp_dev *dev, @@ -453,123 +448,90 @@ static __init void pnpacpi_parse_ext_irq_option(struct pnp_dev *dev, struct acpi_resource_extended_irq *p) { int i; - struct pnp_irq *irq; + pnp_irq_mask_t map; + unsigned char flags; if (p->interrupt_count == 0) return; - irq = kzalloc(sizeof(struct pnp_irq), GFP_KERNEL); - if (!irq) - return; + bitmap_zero(map.bits, PNP_IRQ_NR); for (i = 0; i < p->interrupt_count; i++) if (p->interrupts[i]) - __set_bit(p->interrupts[i], irq->map.bits); - irq->flags = irq_flags(p->triggering, p->polarity, p->sharable); + __set_bit(p->interrupts[i], map.bits); - pnp_register_irq_resource(dev, option, irq); + flags = irq_flags(p->triggering, p->polarity, p->sharable); + pnp_register_irq_resource(dev, option, &map, flags); } static __init void pnpacpi_parse_port_option(struct pnp_dev *dev, struct pnp_option *option, struct acpi_resource_io *io) { - struct pnp_port *port; + unsigned char flags = 0; if (io->address_length == 0) return; - port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL); - if (!port) - return; - port->min = io->minimum; - port->max = io->maximum; - port->align = io->alignment; - port->size = io->address_length; - port->flags = ACPI_DECODE_16 == io->io_decode ? - IORESOURCE_IO_16BIT_ADDR : 0; - pnp_register_port_resource(dev, option, port); + + if (io->io_decode == ACPI_DECODE_16) + flags = IORESOURCE_IO_16BIT_ADDR; + pnp_register_port_resource(dev, option, io->minimum, io->maximum, + io->alignment, io->address_length, flags); } static __init void pnpacpi_parse_fixed_port_option(struct pnp_dev *dev, struct pnp_option *option, struct acpi_resource_fixed_io *io) { - struct pnp_port *port; - if (io->address_length == 0) return; - port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL); - if (!port) - return; - port->min = port->max = io->address; - port->size = io->address_length; - port->align = 0; - port->flags = IORESOURCE_IO_FIXED; - pnp_register_port_resource(dev, option, port); + + pnp_register_port_resource(dev, option, io->address, io->address, 0, + io->address_length, IORESOURCE_IO_FIXED); } static __init void pnpacpi_parse_mem24_option(struct pnp_dev *dev, struct pnp_option *option, struct acpi_resource_memory24 *p) { - struct pnp_mem *mem; + unsigned char flags = 0; if (p->address_length == 0) return; - mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); - if (!mem) - return; - mem->min = p->minimum; - mem->max = p->maximum; - mem->align = p->alignment; - mem->size = p->address_length; - mem->flags = (ACPI_READ_WRITE_MEMORY == p->write_protect) ? - IORESOURCE_MEM_WRITEABLE : 0; - - pnp_register_mem_resource(dev, option, mem); + if (p->write_protect == ACPI_READ_WRITE_MEMORY) + flags = IORESOURCE_MEM_WRITEABLE; + pnp_register_mem_resource(dev, option, p->minimum, p->maximum, + p->alignment, p->address_length, flags); } static __init void pnpacpi_parse_mem32_option(struct pnp_dev *dev, struct pnp_option *option, struct acpi_resource_memory32 *p) { - struct pnp_mem *mem; + unsigned char flags = 0; if (p->address_length == 0) return; - mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); - if (!mem) - return; - mem->min = p->minimum; - mem->max = p->maximum; - mem->align = p->alignment; - mem->size = p->address_length; - mem->flags = (ACPI_READ_WRITE_MEMORY == p->write_protect) ? - IORESOURCE_MEM_WRITEABLE : 0; - - pnp_register_mem_resource(dev, option, mem); + if (p->write_protect == ACPI_READ_WRITE_MEMORY) + flags = IORESOURCE_MEM_WRITEABLE; + pnp_register_mem_resource(dev, option, p->minimum, p->maximum, + p->alignment, p->address_length, flags); } static __init void pnpacpi_parse_fixed_mem32_option(struct pnp_dev *dev, struct pnp_option *option, struct acpi_resource_fixed_memory32 *p) { - struct pnp_mem *mem; + unsigned char flags = 0; if (p->address_length == 0) return; - mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); - if (!mem) - return; - mem->min = mem->max = p->address; - mem->size = p->address_length; - mem->align = 0; - mem->flags = (ACPI_READ_WRITE_MEMORY == p->write_protect) ? - IORESOURCE_MEM_WRITEABLE : 0; - - pnp_register_mem_resource(dev, option, mem); + if (p->write_protect == ACPI_READ_WRITE_MEMORY) + flags = IORESOURCE_MEM_WRITEABLE; + pnp_register_mem_resource(dev, option, p->address, p->address, + 0, p->address_length, flags); } static __init void pnpacpi_parse_address_option(struct pnp_dev *dev, @@ -578,8 +540,7 @@ static __init void pnpacpi_parse_address_option(struct pnp_dev *dev, { struct acpi_resource_address64 addr, *p = &addr; acpi_status status; - struct pnp_mem *mem; - struct pnp_port *port; + unsigned char flags = 0; status = acpi_resource_to_address64(r, p); if (!ACPI_SUCCESS(status)) { @@ -592,26 +553,14 @@ static __init void pnpacpi_parse_address_option(struct pnp_dev *dev, return; if (p->resource_type == ACPI_MEMORY_RANGE) { - mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); - if (!mem) - return; - mem->min = mem->max = p->minimum; - mem->size = p->address_length; - mem->align = 0; - mem->flags = (p->info.mem.write_protect == - ACPI_READ_WRITE_MEMORY) ? IORESOURCE_MEM_WRITEABLE - : 0; - pnp_register_mem_resource(dev, option, mem); - } else if (p->resource_type == ACPI_IO_RANGE) { - port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL); - if (!port) - return; - port->min = port->max = p->minimum; - port->size = p->address_length; - port->align = 0; - port->flags = IORESOURCE_IO_FIXED; - pnp_register_port_resource(dev, option, port); - } + if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY) + flags = IORESOURCE_MEM_WRITEABLE; + pnp_register_mem_resource(dev, option, p->minimum, p->minimum, + 0, p->address_length, flags); + } else if (p->resource_type == ACPI_IO_RANGE) + pnp_register_port_resource(dev, option, p->minimum, p->minimum, + 0, p->address_length, + IORESOURCE_IO_FIXED); } struct acpipnp_parse_option_s { diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c index dd2ea7b03605..26fb04cc12bb 100644 --- a/drivers/pnp/pnpbios/rsparser.c +++ b/drivers/pnp/pnpbios/rsparser.c @@ -218,116 +218,96 @@ static __init void pnpbios_parse_mem_option(struct pnp_dev *dev, unsigned char *p, int size, struct pnp_option *option) { - struct pnp_mem *mem; - - mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); - if (!mem) - return; - mem->min = ((p[5] << 8) | p[4]) << 8; - mem->max = ((p[7] << 8) | p[6]) << 8; - mem->align = (p[9] << 8) | p[8]; - mem->size = ((p[11] << 8) | p[10]) << 8; - mem->flags = p[3]; - pnp_register_mem_resource(dev, option, mem); + resource_size_t min, max, align, len; + unsigned char flags; + + min = ((p[5] << 8) | p[4]) << 8; + max = ((p[7] << 8) | p[6]) << 8; + align = (p[9] << 8) | p[8]; + len = ((p[11] << 8) | p[10]) << 8; + flags = p[3]; + pnp_register_mem_resource(dev, option, min, max, align, len, flags); } static __init void pnpbios_parse_mem32_option(struct pnp_dev *dev, unsigned char *p, int size, struct pnp_option *option) { - struct pnp_mem *mem; - - mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); - if (!mem) - return; - mem->min = (p[7] << 24) | (p[6] << 16) | (p[5] << 8) | p[4]; - mem->max = (p[11] << 24) | (p[10] << 16) | (p[9] << 8) | p[8]; - mem->align = (p[15] << 24) | (p[14] << 16) | (p[13] << 8) | p[12]; - mem->size = (p[19] << 24) | (p[18] << 16) | (p[17] << 8) | p[16]; - mem->flags = p[3]; - pnp_register_mem_resource(dev, option, mem); + resource_size_t min, max, align, len; + unsigned char flags; + + min = (p[7] << 24) | (p[6] << 16) | (p[5] << 8) | p[4]; + max = (p[11] << 24) | (p[10] << 16) | (p[9] << 8) | p[8]; + align = (p[15] << 24) | (p[14] << 16) | (p[13] << 8) | p[12]; + len = (p[19] << 24) | (p[18] << 16) | (p[17] << 8) | p[16]; + flags = p[3]; + pnp_register_mem_resource(dev, option, min, max, align, len, flags); } static __init void pnpbios_parse_fixed_mem32_option(struct pnp_dev *dev, unsigned char *p, int size, struct pnp_option *option) { - struct pnp_mem *mem; - - mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); - if (!mem) - return; - mem->min = mem->max = (p[7] << 24) | (p[6] << 16) | (p[5] << 8) | p[4]; - mem->size = (p[11] << 24) | (p[10] << 16) | (p[9] << 8) | p[8]; - mem->align = 0; - mem->flags = p[3]; - pnp_register_mem_resource(dev, option, mem); + resource_size_t base, len; + unsigned char flags; + + base = (p[7] << 24) | (p[6] << 16) | (p[5] << 8) | p[4]; + len = (p[11] << 24) | (p[10] << 16) | (p[9] << 8) | p[8]; + flags = p[3]; + pnp_register_mem_resource(dev, option, base, base, 0, len, flags); } static __init void pnpbios_parse_irq_option(struct pnp_dev *dev, unsigned char *p, int size, struct pnp_option *option) { - struct pnp_irq *irq; unsigned long bits; + pnp_irq_mask_t map; + unsigned char flags = IORESOURCE_IRQ_HIGHEDGE; - irq = kzalloc(sizeof(struct pnp_irq), GFP_KERNEL); - if (!irq) - return; bits = (p[2] << 8) | p[1]; - bitmap_copy(irq->map.bits, &bits, 16); + + bitmap_zero(map.bits, PNP_IRQ_NR); + bitmap_copy(map.bits, &bits, 16); + if (size > 2) - irq->flags = p[3]; - else - irq->flags = IORESOURCE_IRQ_HIGHEDGE; - pnp_register_irq_resource(dev, option, irq); + flags = p[3]; + + pnp_register_irq_resource(dev, option, &map, flags); } static __init void pnpbios_parse_dma_option(struct pnp_dev *dev, unsigned char *p, int size, struct pnp_option *option) { - struct pnp_dma *dma; - - dma = kzalloc(sizeof(struct pnp_dma), GFP_KERNEL); - if (!dma) - return; - dma->map = p[1]; - dma->flags = p[2]; - pnp_register_dma_resource(dev, option, dma); + pnp_register_dma_resource(dev, option, p[1], p[2]); } static __init void pnpbios_parse_port_option(struct pnp_dev *dev, unsigned char *p, int size, struct pnp_option *option) { - struct pnp_port *port; - - port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL); - if (!port) - return; - port->min = (p[3] << 8) | p[2]; - port->max = (p[5] << 8) | p[4]; - port->align = p[6]; - port->size = p[7]; - port->flags = p[1] ? IORESOURCE_IO_16BIT_ADDR : 0; - pnp_register_port_resource(dev, option, port); + resource_size_t min, max, align, len; + unsigned char flags; + + min = (p[3] << 8) | p[2]; + max = (p[5] << 8) | p[4]; + align = p[6]; + len = p[7]; + flags = p[1] ? IORESOURCE_IO_16BIT_ADDR : 0; + pnp_register_port_resource(dev, option, min, max, align, len, flags); } static __init void pnpbios_parse_fixed_port_option(struct pnp_dev *dev, unsigned char *p, int size, struct pnp_option *option) { - struct pnp_port *port; - - port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL); - if (!port) - return; - port->min = port->max = (p[2] << 8) | p[1]; - port->size = p[3]; - port->align = 0; - port->flags = IORESOURCE_IO_FIXED; - pnp_register_port_resource(dev, option, port); + resource_size_t base, len; + + base = (p[2] << 8) | p[1]; + len = p[3]; + pnp_register_port_resource(dev, option, base, base, 0, len, + IORESOURCE_IO_FIXED); } static __init unsigned char * diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c index 391828c7f207..61145491f363 100644 --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c @@ -78,13 +78,20 @@ struct pnp_option *pnp_register_dependent_option(struct pnp_dev *dev, } int pnp_register_irq_resource(struct pnp_dev *dev, struct pnp_option *option, - struct pnp_irq *data) + pnp_irq_mask_t *map, unsigned char flags) { - struct pnp_irq *ptr; + struct pnp_irq *data, *ptr; #ifdef DEBUG char buf[PNP_IRQ_NR]; /* hex-encoded, so this is overkill but safe */ #endif + data = kzalloc(sizeof(struct pnp_irq), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->map = *map; + data->flags = flags; + ptr = option->irq; while (ptr && ptr->next) ptr = ptr->next; @@ -112,9 +119,16 @@ int pnp_register_irq_resource(struct pnp_dev *dev, struct pnp_option *option, } int pnp_register_dma_resource(struct pnp_dev *dev, struct pnp_option *option, - struct pnp_dma *data) + unsigned char map, unsigned char flags) { - struct pnp_dma *ptr; + struct pnp_dma *data, *ptr; + + data = kzalloc(sizeof(struct pnp_dma), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->map = map; + data->flags = flags; ptr = option->dma; while (ptr && ptr->next) @@ -130,9 +144,21 @@ int pnp_register_dma_resource(struct pnp_dev *dev, struct pnp_option *option, } int pnp_register_port_resource(struct pnp_dev *dev, struct pnp_option *option, - struct pnp_port *data) + resource_size_t min, resource_size_t max, + resource_size_t align, resource_size_t size, + unsigned char flags) { - struct pnp_port *ptr; + struct pnp_port *data, *ptr; + + data = kzalloc(sizeof(struct pnp_port), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->min = min; + data->max = max; + data->align = align; + data->size = size; + data->flags = flags; ptr = option->port; while (ptr && ptr->next) @@ -152,9 +178,21 @@ int pnp_register_port_resource(struct pnp_dev *dev, struct pnp_option *option, } int pnp_register_mem_resource(struct pnp_dev *dev, struct pnp_option *option, - struct pnp_mem *data) + resource_size_t min, resource_size_t max, + resource_size_t align, resource_size_t size, + unsigned char flags) { - struct pnp_mem *ptr; + struct pnp_mem *data, *ptr; + + data = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->min = min; + data->max = max; + data->align = align; + data->size = size; + data->flags = flags; ptr = option->mem; while (ptr && ptr->next) -- cgit v1.2.3 From fe2cf598e6942abd8fb70fee230d74b1a1eae0d1 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:12 -0600 Subject: PNPACPI: ignore _PRS interrupt numbers larger than PNP_IRQ_NR ACPI Extended Interrupt Descriptors can encode 32-bit interrupt numbers, so an interrupt number may exceed the size of the bitmap we use to track possible IRQ settings. To avoid corrupting memory, complain and ignore too-large interrupt numbers. There's similar code in pnpacpi_parse_irq_option(), but I didn't change that because the small IRQ descriptor can only encode IRQs 0-15, which do not exceed bitmap size. In the future, we could handle IRQ numbers greater than PNP_IRQ_NR by replacing the bitmap with a table or list. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/pnpacpi/rsparser.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 3aaf406b67b8..851c773feae1 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -455,9 +455,16 @@ static __init void pnpacpi_parse_ext_irq_option(struct pnp_dev *dev, return; bitmap_zero(map.bits, PNP_IRQ_NR); - for (i = 0; i < p->interrupt_count; i++) - if (p->interrupts[i]) - __set_bit(p->interrupts[i], map.bits); + for (i = 0; i < p->interrupt_count; i++) { + if (p->interrupts[i]) { + if (p->interrupts[i] < PNP_IRQ_NR) + __set_bit(p->interrupts[i], map.bits); + else + dev_err(&dev->dev, "ignoring IRQ %d option " + "(too large for %d entry bitmap)\n", + p->interrupts[i], PNP_IRQ_NR); + } + } flags = irq_flags(p->triggering, p->polarity, p->sharable); pnp_register_irq_resource(dev, option, &map, flags); -- cgit v1.2.3 From 2d29a7a794c5bae982955cd5dd0a76e766e57f39 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:13 -0600 Subject: PNP: rename pnp_register_*_resource() local variables No functional change; just rename "data" to something more descriptive. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/resource.c | 94 +++++++++++++++++++++++++------------------------- 1 file changed, 47 insertions(+), 47 deletions(-) diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c index 61145491f363..a795864dc695 100644 --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c @@ -80,40 +80,40 @@ struct pnp_option *pnp_register_dependent_option(struct pnp_dev *dev, int pnp_register_irq_resource(struct pnp_dev *dev, struct pnp_option *option, pnp_irq_mask_t *map, unsigned char flags) { - struct pnp_irq *data, *ptr; + struct pnp_irq *irq, *ptr; #ifdef DEBUG char buf[PNP_IRQ_NR]; /* hex-encoded, so this is overkill but safe */ #endif - data = kzalloc(sizeof(struct pnp_irq), GFP_KERNEL); - if (!data) + irq = kzalloc(sizeof(struct pnp_irq), GFP_KERNEL); + if (!irq) return -ENOMEM; - data->map = *map; - data->flags = flags; + irq->map = *map; + irq->flags = flags; ptr = option->irq; while (ptr && ptr->next) ptr = ptr->next; if (ptr) - ptr->next = data; + ptr->next = irq; else - option->irq = data; + option->irq = irq; #ifdef CONFIG_PCI { int i; for (i = 0; i < 16; i++) - if (test_bit(i, data->map.bits)) + if (test_bit(i, irq->map.bits)) pcibios_penalize_isa_irq(i, 0); } #endif #ifdef DEBUG - bitmap_scnprintf(buf, sizeof(buf), data->map.bits, PNP_IRQ_NR); + bitmap_scnprintf(buf, sizeof(buf), irq->map.bits, PNP_IRQ_NR); dev_dbg(&dev->dev, " irq bitmask %s flags %#x\n", buf, - data->flags); + irq->flags); #endif return 0; } @@ -121,25 +121,25 @@ int pnp_register_irq_resource(struct pnp_dev *dev, struct pnp_option *option, int pnp_register_dma_resource(struct pnp_dev *dev, struct pnp_option *option, unsigned char map, unsigned char flags) { - struct pnp_dma *data, *ptr; + struct pnp_dma *dma, *ptr; - data = kzalloc(sizeof(struct pnp_dma), GFP_KERNEL); - if (!data) + dma = kzalloc(sizeof(struct pnp_dma), GFP_KERNEL); + if (!dma) return -ENOMEM; - data->map = map; - data->flags = flags; + dma->map = map; + dma->flags = flags; ptr = option->dma; while (ptr && ptr->next) ptr = ptr->next; if (ptr) - ptr->next = data; + ptr->next = dma; else - option->dma = data; + option->dma = dma; - dev_dbg(&dev->dev, " dma bitmask %#x flags %#x\n", data->map, - data->flags); + dev_dbg(&dev->dev, " dma bitmask %#x flags %#x\n", dma->map, + dma->flags); return 0; } @@ -148,32 +148,32 @@ int pnp_register_port_resource(struct pnp_dev *dev, struct pnp_option *option, resource_size_t align, resource_size_t size, unsigned char flags) { - struct pnp_port *data, *ptr; + struct pnp_port *port, *ptr; - data = kzalloc(sizeof(struct pnp_port), GFP_KERNEL); - if (!data) + port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL); + if (!port) return -ENOMEM; - data->min = min; - data->max = max; - data->align = align; - data->size = size; - data->flags = flags; + port->min = min; + port->max = max; + port->align = align; + port->size = size; + port->flags = flags; ptr = option->port; while (ptr && ptr->next) ptr = ptr->next; if (ptr) - ptr->next = data; + ptr->next = port; else - option->port = data; + option->port = port; dev_dbg(&dev->dev, " io " "min %#llx max %#llx align %lld size %lld flags %#x\n", - (unsigned long long) data->min, - (unsigned long long) data->max, - (unsigned long long) data->align, - (unsigned long long) data->size, data->flags); + (unsigned long long) port->min, + (unsigned long long) port->max, + (unsigned long long) port->align, + (unsigned long long) port->size, port->flags); return 0; } @@ -182,32 +182,32 @@ int pnp_register_mem_resource(struct pnp_dev *dev, struct pnp_option *option, resource_size_t align, resource_size_t size, unsigned char flags) { - struct pnp_mem *data, *ptr; + struct pnp_mem *mem, *ptr; - data = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); - if (!data) + mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); + if (!mem) return -ENOMEM; - data->min = min; - data->max = max; - data->align = align; - data->size = size; - data->flags = flags; + mem->min = min; + mem->max = max; + mem->align = align; + mem->size = size; + mem->flags = flags; ptr = option->mem; while (ptr && ptr->next) ptr = ptr->next; if (ptr) - ptr->next = data; + ptr->next = mem; else - option->mem = data; + option->mem = mem; dev_dbg(&dev->dev, " mem " "min %#llx max %#llx align %lld size %lld flags %#x\n", - (unsigned long long) data->min, - (unsigned long long) data->max, - (unsigned long long) data->align, - (unsigned long long) data->size, data->flags); + (unsigned long long) mem->min, + (unsigned long long) mem->max, + (unsigned long long) mem->align, + (unsigned long long) mem->size, mem->flags); return 0; } -- cgit v1.2.3 From d5ebde6ef5c2d51828f975a81d7d0e58bccfd833 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:14 -0600 Subject: PNP: support optional IRQ resources This patch adds an IORESOURCE_IRQ_OPTIONAL flag for use when assigning resources to a device. If the flag is set and we are unable to assign an IRQ to the device, we can leave the IRQ disabled but allow the overall resource allocation to succeed. Some devices request an IRQ, but can run without an IRQ (possibly with degraded performance). This flag lets us run the device without the IRQ instead of just leaving the device disabled. This is a reimplementation of this previous change by Rene Herman : http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3b73a223661ed137c5d3d2635f954382e94f5a43 I reimplemented this for two reasons: - to prepare for converting all resource options into a single linked list, as opposed to the per-resource-type lists we have now, and - to preserve the order and number of resource options. In PNPBIOS and ACPI, we configure a device by giving firmware a list of resource assignments. It is important that this list has exactly the same number of resources, in the same order, as the "template" list we got from the firmware in the first place. The problem of a sound card MPU401 being left disabled for want of an IRQ was reported by Uwe Bugla . Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/interface.c | 2 ++ drivers/pnp/manager.c | 9 +++++++ drivers/pnp/quirks.c | 71 +++++++++++++++++++------------------------------ include/linux/ioport.h | 1 + 4 files changed, 39 insertions(+), 44 deletions(-) diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c index b09f67de13d0..7a9fb5544b80 100644 --- a/drivers/pnp/interface.c +++ b/drivers/pnp/interface.c @@ -90,6 +90,8 @@ static void pnp_print_irq(pnp_info_buffer_t * buffer, char *space, pnp_printf(buffer, " High-Level"); if (irq->flags & IORESOURCE_IRQ_LOWLEVEL) pnp_printf(buffer, " Low-Level"); + if (irq->flags & IORESOURCE_IRQ_OPTIONAL) + pnp_printf(buffer, " (optional)"); pnp_printf(buffer, "\n"); } diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c index 7ea9e1e28003..a20accb5ef8f 100644 --- a/drivers/pnp/manager.c +++ b/drivers/pnp/manager.c @@ -153,6 +153,15 @@ static int pnp_assign_irq(struct pnp_dev *dev, struct pnp_irq *rule, int idx) goto __add; } } + + if (rule->flags & IORESOURCE_IRQ_OPTIONAL) { + res->start = -1; + res->end = -1; + res->flags |= IORESOURCE_DISABLED; + dev_dbg(&dev->dev, " irq %d disabled (optional)\n", idx); + goto __add; + } + dev_dbg(&dev->dev, " couldn't assign irq %d\n", idx); return -EBUSY; diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index 48e60171b3ba..e8515ce0d296 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -121,34 +121,46 @@ static struct pnp_option *quirk_isapnp_mpu_options(struct pnp_dev *dev) struct pnp_option *res; /* - * Build a functional IRQ-less variant of each MPU option. + * Build a functional IRQ-optional variant of each MPU option. */ for (res = dev->dependent; res; res = res->next) { struct pnp_option *curr; struct pnp_port *port; - struct pnp_port *copy; + struct pnp_port *copy_port; + struct pnp_irq *irq; + struct pnp_irq *copy_irq; port = res->port; - if (!port || !res->irq) + irq = res->irq; + if (!port || !irq) continue; - copy = pnp_alloc(sizeof *copy); - if (!copy) + copy_port = pnp_alloc(sizeof *copy_port); + if (!copy_port) + break; + + copy_irq = pnp_alloc(sizeof *copy_irq); + if (!copy_irq) { + kfree(copy_port); break; + } + + *copy_port = *port; + copy_port->next = NULL; - copy->min = port->min; - copy->max = port->max; - copy->align = port->align; - copy->size = port->size; - copy->flags = port->flags; + *copy_irq = *irq; + copy_irq->flags |= IORESOURCE_IRQ_OPTIONAL; + copy_irq->next = NULL; curr = pnp_build_option(PNP_RES_PRIORITY_FUNCTIONAL); if (!curr) { - kfree(copy); + kfree(copy_port); + kfree(copy_irq); break; } - curr->port = copy; + curr->port = copy_port; + curr->irq = copy_irq; if (prev) prev->next = curr; @@ -157,7 +169,7 @@ static struct pnp_option *quirk_isapnp_mpu_options(struct pnp_dev *dev) prev = curr; } if (head) - dev_info(&dev->dev, "adding IRQ-less MPU options\n"); + dev_info(&dev->dev, "adding IRQ-optional MPU options\n"); return head; } @@ -167,10 +179,6 @@ static void quirk_ad1815_mpu_resources(struct pnp_dev *dev) struct pnp_option *res; struct pnp_irq *irq; - /* - * Distribute the independent IRQ over the dependent options - */ - res = dev->independent; if (!res) return; @@ -179,33 +187,8 @@ static void quirk_ad1815_mpu_resources(struct pnp_dev *dev) if (!irq || irq->next) return; - res = dev->dependent; - if (!res) - return; - - while (1) { - struct pnp_irq *copy; - - copy = pnp_alloc(sizeof *copy); - if (!copy) - break; - - bitmap_copy(copy->map.bits, irq->map.bits, PNP_IRQ_NR); - copy->flags = irq->flags; - - copy->next = res->irq; /* Yes, this is NULL */ - res->irq = copy; - - if (!res->next) - break; - res = res->next; - } - kfree(irq); - - res->next = quirk_isapnp_mpu_options(dev); - - res = dev->independent; - res->irq = NULL; + irq->flags |= IORESOURCE_IRQ_OPTIONAL; + dev_info(&dev->dev, "made independent IRQ optional\n"); } static void quirk_isapnp_mpu_resources(struct pnp_dev *dev) diff --git a/include/linux/ioport.h b/include/linux/ioport.h index 39db059ffb8b..2cd07cc29687 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -59,6 +59,7 @@ struct resource_list { #define IORESOURCE_IRQ_HIGHLEVEL (1<<2) #define IORESOURCE_IRQ_LOWLEVEL (1<<3) #define IORESOURCE_IRQ_SHAREABLE (1<<4) +#define IORESOURCE_IRQ_OPTIONAL (1<<5) /* PnP DMA specific bits (IORESOURCE_BITS) */ #define IORESOURCE_DMA_TYPE_MASK (3<<0) -- cgit v1.2.3 From e2a1a6f1cfaf6ee770a8700e5df8a3708dae503b Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:15 -0600 Subject: PNP: remove extra 0x100 bit from option priority When building resource options, ISAPNP and PNPBIOS set the priority to something like "0x100 | PNP_RES_PRIORITY_ACCEPTABLE", but we immediately mask off the 0x100 again in pnp_build_option(), so that bit looks superfluous. Thanks to Rene Herman for pointing this out. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/isapnp/core.c | 8 +++----- drivers/pnp/pnpacpi/rsparser.c | 2 +- drivers/pnp/pnpbios/rsparser.c | 6 +++--- 3 files changed, 7 insertions(+), 9 deletions(-) diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c index 3f75fdbe6098..90718be66463 100644 --- a/drivers/pnp/isapnp/core.c +++ b/drivers/pnp/isapnp/core.c @@ -582,7 +582,7 @@ isapnp_parse_name(char *name, unsigned int name_max, unsigned short *size) static int __init isapnp_create_device(struct pnp_card *card, unsigned short size) { - int number = 0, skip = 0, priority = 0, compat = 0; + int number = 0, skip = 0, priority, compat = 0; unsigned char type, tmp[17]; struct pnp_option *option; struct pnp_dev *dev; @@ -621,7 +621,6 @@ static int __init isapnp_create_device(struct pnp_card *card, } else { skip = 1; } - priority = 0; compat = 0; break; case _STAG_COMPATDEVID: @@ -650,10 +649,10 @@ static int __init isapnp_create_device(struct pnp_card *card, case _STAG_STARTDEP: if (size > 1) goto __skip; - priority = 0x100 | PNP_RES_PRIORITY_ACCEPTABLE; + priority = PNP_RES_PRIORITY_ACCEPTABLE; if (size > 0) { isapnp_peek(tmp, size); - priority = 0x100 | tmp[0]; + priority = tmp[0]; size = 0; } option = pnp_register_dependent_option(dev, priority); @@ -663,7 +662,6 @@ static int __init isapnp_create_device(struct pnp_card *card, case _STAG_ENDDEP: if (size != 0) goto __skip; - priority = 0; dev_dbg(&dev->dev, "end dependent options\n"); break; case _STAG_IOPORT: diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 851c773feae1..e114b3d2b933 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -579,7 +579,7 @@ struct acpipnp_parse_option_s { static __init acpi_status pnpacpi_option_resource(struct acpi_resource *res, void *data) { - int priority = 0; + int priority; struct acpipnp_parse_option_s *parse_data = data; struct pnp_dev *dev = parse_data->dev; struct pnp_option *option = parse_data->option; diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c index 26fb04cc12bb..db23ba78d39c 100644 --- a/drivers/pnp/pnpbios/rsparser.c +++ b/drivers/pnp/pnpbios/rsparser.c @@ -315,7 +315,7 @@ pnpbios_parse_resource_option_data(unsigned char *p, unsigned char *end, struct pnp_dev *dev) { unsigned int len, tag; - int priority = 0; + int priority; struct pnp_option *option, *option_independent; if (!p) @@ -389,9 +389,9 @@ pnpbios_parse_resource_option_data(unsigned char *p, unsigned char *end, case SMALL_TAG_STARTDEP: if (len > 1) goto len_err; - priority = 0x100 | PNP_RES_PRIORITY_ACCEPTABLE; + priority = PNP_RES_PRIORITY_ACCEPTABLE; if (len > 0) - priority = 0x100 | p[1]; + priority = p[1]; option = pnp_register_dependent_option(dev, priority); if (!option) return NULL; -- cgit v1.2.3 From bbe413b4fc7f791248c7ee00ce7b3778491a3700 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:16 -0600 Subject: ISAPNP: handle independent options following dependent ones The ISAPNP spec recommends that independent options precede dependent ones, but this is not actually required. The current ISAPNP code incorrectly puts such trailing independent options at the end of the last dependent option list. This patch fixes that bug by resetting the current option list to the independent list when we see an "End Dependent Functions" tag. PNPBIOS and PNPACPI handle this the same way. Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/isapnp/core.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c index 90718be66463..53cc4d6133e6 100644 --- a/drivers/pnp/isapnp/core.c +++ b/drivers/pnp/isapnp/core.c @@ -584,14 +584,14 @@ static int __init isapnp_create_device(struct pnp_card *card, { int number = 0, skip = 0, priority, compat = 0; unsigned char type, tmp[17]; - struct pnp_option *option; + struct pnp_option *option, *option_independent; struct pnp_dev *dev; u32 eisa_id; char id[8]; if ((dev = isapnp_parse_device(card, size, number++)) == NULL) return 1; - option = pnp_register_independent_option(dev); + option_independent = option = pnp_register_independent_option(dev); if (!option) { kfree(dev); return 1; @@ -613,6 +613,7 @@ static int __init isapnp_create_device(struct pnp_card *card, size = 0; skip = 0; option = pnp_register_independent_option(dev); + option_independent = option; if (!option) { kfree(dev); return 1; @@ -662,6 +663,10 @@ static int __init isapnp_create_device(struct pnp_card *card, case _STAG_ENDDEP: if (size != 0) goto __skip; + if (option_independent == option) + dev_warn(&dev->dev, "missing " + "_STAG_STARTDEP tag\n"); + option = option_independent; dev_dbg(&dev->dev, "end dependent options\n"); break; case _STAG_IOPORT: -- cgit v1.2.3 From 1f32ca31e7409d37c1b25e5f81840fb184380cdf Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:17 -0600 Subject: PNP: convert resource options to single linked list ISAPNP, PNPBIOS, and ACPI describe the "possible resource settings" of a device, i.e., the possibilities an OS bus driver has when it assigns I/O port, MMIO, and other resources to the device. PNP used to maintain this "possible resource setting" information in one independent option structure and a list of dependent option structures for each device. Each of these option structures had lists of I/O, memory, IRQ, and DMA resources, for example: dev independent options ind-io0 -> ind-io1 ... ind-mem0 -> ind-mem1 ... ... dependent option set 0 dep0-io0 -> dep0-io1 ... dep0-mem0 -> dep0-mem1 ... ... dependent option set 1 dep1-io0 -> dep1-io1 ... dep1-mem0 -> dep1-mem1 ... ... ... This data structure was designed for ISAPNP, where the OS configures device resource settings by writing directly to configuration registers. The OS can write the registers in arbitrary order much like it writes PCI BARs. However, for PNPBIOS and ACPI devices, the OS uses firmware interfaces that perform device configuration, and it is important to pass the desired settings to those interfaces in the correct order. The OS learns the correct order by using firmware interfaces that return the "current resource settings" and "possible resource settings," but the option structures above doesn't store the ordering information. This patch replaces the independent and dependent lists with a single list of options. For example, a device might have possible resource settings like this: dev options ind-io0 -> dep0-io0 -> dep1->io0 -> ind-io1 ... All the possible settings are in the same list, in the order they come from the firmware "possible resource settings" list. Each entry is tagged with an independent/dependent flag. Dependent entries also have a "set number" and an optional priority value. All dependent entries must be assigned from the same set. For example, the OS can use all the entries from dependent set 0, or all the entries from dependent set 1, but it cannot mix entries from set 0 with entries from set 1. Prior to this patch PNP didn't keep track of the order of this list, and it assigned all independent options first, then all dependent ones. Using the example above, that resulted in a "desired configuration" list like this: ind->io0 -> ind->io1 -> depN-io0 ... instead of the list the firmware expects, which looks like this: ind->io0 -> depN-io0 -> ind-io1 ... Signed-off-by: Bjorn Helgaas Signed-off-by: Andi Kleen Acked-by: Rene Herman Signed-off-by: Len Brown --- drivers/pnp/base.h | 93 +++++++++---- drivers/pnp/core.c | 4 +- drivers/pnp/interface.c | 75 +++++------ drivers/pnp/isapnp/core.c | 72 +++++----- drivers/pnp/manager.c | 145 +++++++-------------- drivers/pnp/pnpacpi/rsparser.c | 93 ++++++------- drivers/pnp/pnpbios/rsparser.c | 67 +++++----- drivers/pnp/quirks.c | 290 ++++++++++++++++++++++------------------- drivers/pnp/resource.c | 268 +++++++++---------------------------- drivers/pnp/support.c | 92 +++++++++++++ include/linux/pnp.h | 6 +- 11 files changed, 571 insertions(+), 634 deletions(-) diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h index 360c6385686c..e3fa9a2d9a3d 100644 --- a/drivers/pnp/base.h +++ b/drivers/pnp/base.h @@ -1,3 +1,8 @@ +/* + * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas + */ + extern spinlock_t pnp_lock; void *pnp_alloc(long size); @@ -25,8 +30,6 @@ struct pnp_port { resource_size_t align; /* align boundary */ resource_size_t size; /* size of range */ unsigned char flags; /* port flags */ - unsigned char pad; /* pad */ - struct pnp_port *next; /* next port */ }; #define PNP_IRQ_NR 256 @@ -35,14 +38,11 @@ typedef struct { DECLARE_BITMAP(bits, PNP_IRQ_NR); } pnp_irq_mask_t; struct pnp_irq { pnp_irq_mask_t map; /* bitmap for IRQ lines */ unsigned char flags; /* IRQ flags */ - unsigned char pad; /* pad */ - struct pnp_irq *next; /* next IRQ */ }; struct pnp_dma { unsigned char map; /* bitmask for DMA channels */ unsigned char flags; /* DMA flags */ - struct pnp_dma *next; /* next port */ }; struct pnp_mem { @@ -51,44 +51,91 @@ struct pnp_mem { resource_size_t align; /* align boundary */ resource_size_t size; /* size of range */ unsigned char flags; /* memory flags */ - unsigned char pad; /* pad */ - struct pnp_mem *next; /* next memory resource */ }; +#define PNP_OPTION_DEPENDENT 0x80000000 +#define PNP_OPTION_SET_MASK 0xffff +#define PNP_OPTION_SET_SHIFT 12 +#define PNP_OPTION_PRIORITY_MASK 0xfff +#define PNP_OPTION_PRIORITY_SHIFT 0 + #define PNP_RES_PRIORITY_PREFERRED 0 #define PNP_RES_PRIORITY_ACCEPTABLE 1 #define PNP_RES_PRIORITY_FUNCTIONAL 2 -#define PNP_RES_PRIORITY_INVALID 65535 +#define PNP_RES_PRIORITY_INVALID PNP_OPTION_PRIORITY_MASK struct pnp_option { - unsigned short priority; /* priority */ - struct pnp_port *port; /* first port */ - struct pnp_irq *irq; /* first IRQ */ - struct pnp_dma *dma; /* first DMA */ - struct pnp_mem *mem; /* first memory resource */ - struct pnp_option *next; /* used to chain dependent resources */ + struct list_head list; + unsigned int flags; /* independent/dependent, set, priority */ + + unsigned long type; /* IORESOURCE_{IO,MEM,IRQ,DMA} */ + union { + struct pnp_port port; + struct pnp_irq irq; + struct pnp_dma dma; + struct pnp_mem mem; + } u; }; -struct pnp_option *pnp_build_option(int priority); -struct pnp_option *pnp_register_independent_option(struct pnp_dev *dev); -struct pnp_option *pnp_register_dependent_option(struct pnp_dev *dev, - int priority); -int pnp_register_irq_resource(struct pnp_dev *dev, struct pnp_option *option, +int pnp_register_irq_resource(struct pnp_dev *dev, unsigned int option_flags, pnp_irq_mask_t *map, unsigned char flags); -int pnp_register_dma_resource(struct pnp_dev *dev, struct pnp_option *option, +int pnp_register_dma_resource(struct pnp_dev *dev, unsigned int option_flags, unsigned char map, unsigned char flags); -int pnp_register_port_resource(struct pnp_dev *dev, struct pnp_option *option, +int pnp_register_port_resource(struct pnp_dev *dev, unsigned int option_flags, resource_size_t min, resource_size_t max, resource_size_t align, resource_size_t size, unsigned char flags); -int pnp_register_mem_resource(struct pnp_dev *dev, struct pnp_option *option, +int pnp_register_mem_resource(struct pnp_dev *dev, unsigned int option_flags, resource_size_t min, resource_size_t max, resource_size_t align, resource_size_t size, unsigned char flags); + +static inline int pnp_option_is_dependent(struct pnp_option *option) +{ + return option->flags & PNP_OPTION_DEPENDENT ? 1 : 0; +} + +static inline unsigned int pnp_option_set(struct pnp_option *option) +{ + return (option->flags >> PNP_OPTION_SET_SHIFT) & PNP_OPTION_SET_MASK; +} + +static inline unsigned int pnp_option_priority(struct pnp_option *option) +{ + return (option->flags >> PNP_OPTION_PRIORITY_SHIFT) & + PNP_OPTION_PRIORITY_MASK; +} + +static inline unsigned int pnp_new_dependent_set(struct pnp_dev *dev, + int priority) +{ + unsigned int flags; + + if (priority > PNP_RES_PRIORITY_FUNCTIONAL) { + dev_warn(&dev->dev, "invalid dependent option priority %d " + "clipped to %d", priority, + PNP_RES_PRIORITY_INVALID); + priority = PNP_RES_PRIORITY_INVALID; + } + + flags = PNP_OPTION_DEPENDENT | + ((dev->num_dependent_sets & PNP_OPTION_SET_MASK) << + PNP_OPTION_SET_SHIFT) | + ((priority & PNP_OPTION_PRIORITY_MASK) << + PNP_OPTION_PRIORITY_SHIFT); + + dev->num_dependent_sets++; + + return flags; +} + +char *pnp_option_priority_name(struct pnp_option *option); +void dbg_pnp_show_option(struct pnp_dev *dev, struct pnp_option *option); + void pnp_init_resources(struct pnp_dev *dev); void pnp_fixup_device(struct pnp_dev *dev); -void pnp_free_option(struct pnp_option *option); +void pnp_free_options(struct pnp_dev *dev); int __pnp_add_device(struct pnp_dev *dev); void __pnp_remove_device(struct pnp_dev *dev); diff --git a/drivers/pnp/core.c b/drivers/pnp/core.c index 7182da92aec3..a411582bcd72 100644 --- a/drivers/pnp/core.c +++ b/drivers/pnp/core.c @@ -118,10 +118,9 @@ static void pnp_release_device(struct device *dmdev) { struct pnp_dev *dev = to_pnp_dev(dmdev); - pnp_free_option(dev->independent); - pnp_free_option(dev->dependent); pnp_free_ids(dev); pnp_free_resources(dev); + pnp_free_options(dev); kfree(dev); } @@ -135,6 +134,7 @@ struct pnp_dev *pnp_alloc_dev(struct pnp_protocol *protocol, int id, char *pnpid return NULL; INIT_LIST_HEAD(&dev->resources); + INIT_LIST_HEAD(&dev->options); dev->protocol = protocol; dev->number = id; dev->dma_mask = DMA_24BIT_MASK; diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c index 7a9fb5544b80..a876ecf7028c 100644 --- a/drivers/pnp/interface.c +++ b/drivers/pnp/interface.c @@ -3,6 +3,8 @@ * * Some code, especially possible resource dumping is based on isapnp_proc.c (c) Jaroslav Kysela * Copyright 2002 Adam Belay + * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas */ #include @@ -184,39 +186,22 @@ static void pnp_print_mem(pnp_info_buffer_t * buffer, char *space, } static void pnp_print_option(pnp_info_buffer_t * buffer, char *space, - struct pnp_option *option, int dep) + struct pnp_option *option) { - char *s; - struct pnp_port *port; - struct pnp_irq *irq; - struct pnp_dma *dma; - struct pnp_mem *mem; - - if (dep) { - switch (option->priority) { - case PNP_RES_PRIORITY_PREFERRED: - s = "preferred"; - break; - case PNP_RES_PRIORITY_ACCEPTABLE: - s = "acceptable"; - break; - case PNP_RES_PRIORITY_FUNCTIONAL: - s = "functional"; - break; - default: - s = "invalid"; - } - pnp_printf(buffer, "Dependent: %02i - Priority %s\n", dep, s); + switch (option->type) { + case IORESOURCE_IO: + pnp_print_port(buffer, space, &option->u.port); + break; + case IORESOURCE_MEM: + pnp_print_mem(buffer, space, &option->u.mem); + break; + case IORESOURCE_IRQ: + pnp_print_irq(buffer, space, &option->u.irq); + break; + case IORESOURCE_DMA: + pnp_print_dma(buffer, space, &option->u.dma); + break; } - - for (port = option->port; port; port = port->next) - pnp_print_port(buffer, space, port); - for (irq = option->irq; irq; irq = irq->next) - pnp_print_irq(buffer, space, irq); - for (dma = option->dma; dma; dma = dma->next) - pnp_print_dma(buffer, space, dma); - for (mem = option->mem; mem; mem = mem->next) - pnp_print_mem(buffer, space, mem); } static ssize_t pnp_show_options(struct device *dmdev, @@ -224,9 +209,9 @@ static ssize_t pnp_show_options(struct device *dmdev, { struct pnp_dev *dev = to_pnp_dev(dmdev); pnp_info_buffer_t *buffer; - struct pnp_option *independent = dev->independent; - struct pnp_option *dependent = dev->dependent; - int ret, dep = 1; + struct pnp_option *option; + int ret, dep = 0, set = 0; + char *indent; buffer = pnp_alloc(sizeof(pnp_info_buffer_t)); if (!buffer) @@ -235,14 +220,24 @@ static ssize_t pnp_show_options(struct device *dmdev, buffer->len = PAGE_SIZE; buffer->buffer = buf; buffer->curr = buffer->buffer; - if (independent) - pnp_print_option(buffer, "", independent, 0); - while (dependent) { - pnp_print_option(buffer, " ", dependent, dep); - dependent = dependent->next; - dep++; + list_for_each_entry(option, &dev->options, list) { + if (pnp_option_is_dependent(option)) { + indent = " "; + if (!dep || pnp_option_set(option) != set) { + set = pnp_option_set(option); + dep = 1; + pnp_printf(buffer, "Dependent: %02i - " + "Priority %s\n", set, + pnp_option_priority_name(option)); + } + } else { + dep = 0; + indent = ""; + } + pnp_print_option(buffer, indent, option); } + ret = (buffer->curr - buf); kfree(buffer); return ret; diff --git a/drivers/pnp/isapnp/core.c b/drivers/pnp/isapnp/core.c index 53cc4d6133e6..101a835e8759 100644 --- a/drivers/pnp/isapnp/core.c +++ b/drivers/pnp/isapnp/core.c @@ -429,7 +429,7 @@ static struct pnp_dev *__init isapnp_parse_device(struct pnp_card *card, * Add IRQ resource to resources list. */ static void __init isapnp_parse_irq_resource(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, int size) { unsigned char tmp[3]; @@ -446,27 +446,27 @@ static void __init isapnp_parse_irq_resource(struct pnp_dev *dev, if (size > 2) flags = tmp[2]; - pnp_register_irq_resource(dev, option, &map, flags); + pnp_register_irq_resource(dev, option_flags, &map, flags); } /* * Add DMA resource to resources list. */ static void __init isapnp_parse_dma_resource(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, int size) { unsigned char tmp[2]; isapnp_peek(tmp, size); - pnp_register_dma_resource(dev, option, tmp[0], tmp[1]); + pnp_register_dma_resource(dev, option_flags, tmp[0], tmp[1]); } /* * Add port resource to resources list. */ static void __init isapnp_parse_port_resource(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, int size) { unsigned char tmp[7]; @@ -479,14 +479,15 @@ static void __init isapnp_parse_port_resource(struct pnp_dev *dev, align = tmp[5]; len = tmp[6]; flags = tmp[0] ? IORESOURCE_IO_16BIT_ADDR : 0; - pnp_register_port_resource(dev, option, min, max, align, len, flags); + pnp_register_port_resource(dev, option_flags, + min, max, align, len, flags); } /* * Add fixed port resource to resources list. */ static void __init isapnp_parse_fixed_port_resource(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, int size) { unsigned char tmp[3]; @@ -495,7 +496,7 @@ static void __init isapnp_parse_fixed_port_resource(struct pnp_dev *dev, isapnp_peek(tmp, size); base = (tmp[1] << 8) | tmp[0]; len = tmp[2]; - pnp_register_port_resource(dev, option, base, base, 0, len, + pnp_register_port_resource(dev, option_flags, base, base, 0, len, IORESOURCE_IO_FIXED); } @@ -503,7 +504,7 @@ static void __init isapnp_parse_fixed_port_resource(struct pnp_dev *dev, * Add memory resource to resources list. */ static void __init isapnp_parse_mem_resource(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, int size) { unsigned char tmp[9]; @@ -516,14 +517,15 @@ static void __init isapnp_parse_mem_resource(struct pnp_dev *dev, align = (tmp[6] << 8) | tmp[5]; len = ((tmp[8] << 8) | tmp[7]) << 8; flags = tmp[0]; - pnp_register_mem_resource(dev, option, min, max, align, len, flags); + pnp_register_mem_resource(dev, option_flags, + min, max, align, len, flags); } /* * Add 32-bit memory resource to resources list. */ static void __init isapnp_parse_mem32_resource(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, int size) { unsigned char tmp[17]; @@ -536,14 +538,15 @@ static void __init isapnp_parse_mem32_resource(struct pnp_dev *dev, align = (tmp[12] << 24) | (tmp[11] << 16) | (tmp[10] << 8) | tmp[9]; len = (tmp[16] << 24) | (tmp[15] << 16) | (tmp[14] << 8) | tmp[13]; flags = tmp[0]; - pnp_register_mem_resource(dev, option, min, max, align, len, flags); + pnp_register_mem_resource(dev, option_flags, + min, max, align, len, flags); } /* * Add 32-bit fixed memory resource to resources list. */ static void __init isapnp_parse_fixed_mem32_resource(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, int size) { unsigned char tmp[9]; @@ -554,7 +557,7 @@ static void __init isapnp_parse_fixed_mem32_resource(struct pnp_dev *dev, base = (tmp[4] << 24) | (tmp[3] << 16) | (tmp[2] << 8) | tmp[1]; len = (tmp[8] << 24) | (tmp[7] << 16) | (tmp[6] << 8) | tmp[5]; flags = tmp[0]; - pnp_register_mem_resource(dev, option, base, base, 0, len, flags); + pnp_register_mem_resource(dev, option_flags, base, base, 0, len, flags); } /* @@ -584,18 +587,14 @@ static int __init isapnp_create_device(struct pnp_card *card, { int number = 0, skip = 0, priority, compat = 0; unsigned char type, tmp[17]; - struct pnp_option *option, *option_independent; + unsigned int option_flags; struct pnp_dev *dev; u32 eisa_id; char id[8]; if ((dev = isapnp_parse_device(card, size, number++)) == NULL) return 1; - option_independent = option = pnp_register_independent_option(dev); - if (!option) { - kfree(dev); - return 1; - } + option_flags = 0; pnp_add_card_device(card, dev); while (1) { @@ -612,12 +611,7 @@ static int __init isapnp_create_device(struct pnp_card *card, return 1; size = 0; skip = 0; - option = pnp_register_independent_option(dev); - option_independent = option; - if (!option) { - kfree(dev); - return 1; - } + option_flags = 0; pnp_add_card_device(card, dev); } else { skip = 1; @@ -638,13 +632,13 @@ static int __init isapnp_create_device(struct pnp_card *card, case _STAG_IRQ: if (size < 2 || size > 3) goto __skip; - isapnp_parse_irq_resource(dev, option, size); + isapnp_parse_irq_resource(dev, option_flags, size); size = 0; break; case _STAG_DMA: if (size != 2) goto __skip; - isapnp_parse_dma_resource(dev, option, size); + isapnp_parse_dma_resource(dev, option_flags, size); size = 0; break; case _STAG_STARTDEP: @@ -656,29 +650,24 @@ static int __init isapnp_create_device(struct pnp_card *card, priority = tmp[0]; size = 0; } - option = pnp_register_dependent_option(dev, priority); - if (!option) - return 1; + option_flags = pnp_new_dependent_set(dev, priority); break; case _STAG_ENDDEP: if (size != 0) goto __skip; - if (option_independent == option) - dev_warn(&dev->dev, "missing " - "_STAG_STARTDEP tag\n"); - option = option_independent; - dev_dbg(&dev->dev, "end dependent options\n"); + option_flags = 0; break; case _STAG_IOPORT: if (size != 7) goto __skip; - isapnp_parse_port_resource(dev, option, size); + isapnp_parse_port_resource(dev, option_flags, size); size = 0; break; case _STAG_FIXEDIO: if (size != 3) goto __skip; - isapnp_parse_fixed_port_resource(dev, option, size); + isapnp_parse_fixed_port_resource(dev, option_flags, + size); size = 0; break; case _STAG_VENDOR: @@ -686,7 +675,7 @@ static int __init isapnp_create_device(struct pnp_card *card, case _LTAG_MEMRANGE: if (size != 9) goto __skip; - isapnp_parse_mem_resource(dev, option, size); + isapnp_parse_mem_resource(dev, option_flags, size); size = 0; break; case _LTAG_ANSISTR: @@ -701,13 +690,14 @@ static int __init isapnp_create_device(struct pnp_card *card, case _LTAG_MEM32RANGE: if (size != 17) goto __skip; - isapnp_parse_mem32_resource(dev, option, size); + isapnp_parse_mem32_resource(dev, option_flags, size); size = 0; break; case _LTAG_FIXEDMEM32RANGE: if (size != 9) goto __skip; - isapnp_parse_fixed_mem32_resource(dev, option, size); + isapnp_parse_fixed_mem32_resource(dev, option_flags, + size); size = 0; break; case _STAG_END: diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c index a20accb5ef8f..b526eaad3f6c 100644 --- a/drivers/pnp/manager.c +++ b/drivers/pnp/manager.c @@ -3,6 +3,8 @@ * * based on isapnp.c resource management (c) Jaroslav Kysela * Copyright 2003 Adam Belay + * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas */ #include @@ -228,102 +230,51 @@ static void pnp_clean_resource_table(struct pnp_dev *dev) /** * pnp_assign_resources - assigns resources to the device based on the specified dependent number * @dev: pointer to the desired device - * @depnum: the dependent function number - * - * Only set depnum to 0 if the device does not have dependent options. + * @set: the dependent function number */ -static int pnp_assign_resources(struct pnp_dev *dev, int depnum) +static int pnp_assign_resources(struct pnp_dev *dev, int set) { - struct pnp_port *port; - struct pnp_mem *mem; - struct pnp_irq *irq; - struct pnp_dma *dma; + struct pnp_option *option; int nport = 0, nmem = 0, nirq = 0, ndma = 0; + int ret = 0; - dbg_pnp_show_resources(dev, "before pnp_assign_resources"); + dev_dbg(&dev->dev, "pnp_assign_resources, try dependent set %d\n", set); mutex_lock(&pnp_res_mutex); pnp_clean_resource_table(dev); - if (dev->independent) { - dev_dbg(&dev->dev, "assigning independent options\n"); - port = dev->independent->port; - mem = dev->independent->mem; - irq = dev->independent->irq; - dma = dev->independent->dma; - while (port) { - if (pnp_assign_port(dev, port, nport) < 0) - goto fail; - nport++; - port = port->next; - } - while (mem) { - if (pnp_assign_mem(dev, mem, nmem) < 0) - goto fail; - nmem++; - mem = mem->next; - } - while (irq) { - if (pnp_assign_irq(dev, irq, nirq) < 0) - goto fail; - nirq++; - irq = irq->next; - } - while (dma) { - if (pnp_assign_dma(dev, dma, ndma) < 0) - goto fail; - ndma++; - dma = dma->next; - } - } - if (depnum) { - struct pnp_option *dep; - int i; - - dev_dbg(&dev->dev, "assigning dependent option %d\n", depnum); - for (i = 1, dep = dev->dependent; i < depnum; - i++, dep = dep->next) - if (!dep) - goto fail; - port = dep->port; - mem = dep->mem; - irq = dep->irq; - dma = dep->dma; - while (port) { - if (pnp_assign_port(dev, port, nport) < 0) - goto fail; - nport++; - port = port->next; - } - while (mem) { - if (pnp_assign_mem(dev, mem, nmem) < 0) - goto fail; - nmem++; - mem = mem->next; - } - while (irq) { - if (pnp_assign_irq(dev, irq, nirq) < 0) - goto fail; - nirq++; - irq = irq->next; - } - while (dma) { - if (pnp_assign_dma(dev, dma, ndma) < 0) - goto fail; - ndma++; - dma = dma->next; + list_for_each_entry(option, &dev->options, list) { + if (pnp_option_is_dependent(option) && + pnp_option_set(option) != set) + continue; + + switch (option->type) { + case IORESOURCE_IO: + ret = pnp_assign_port(dev, &option->u.port, nport++); + break; + case IORESOURCE_MEM: + ret = pnp_assign_mem(dev, &option->u.mem, nmem++); + break; + case IORESOURCE_IRQ: + ret = pnp_assign_irq(dev, &option->u.irq, nirq++); + break; + case IORESOURCE_DMA: + ret = pnp_assign_dma(dev, &option->u.dma, ndma++); + break; + default: + ret = -EINVAL; + break; } - } else if (dev->dependent) - goto fail; - - mutex_unlock(&pnp_res_mutex); - dbg_pnp_show_resources(dev, "after pnp_assign_resources"); - return 1; + if (ret < 0) + break; + } -fail: - pnp_clean_resource_table(dev); mutex_unlock(&pnp_res_mutex); - dbg_pnp_show_resources(dev, "after pnp_assign_resources (failed)"); - return 0; + if (ret < 0) { + dev_dbg(&dev->dev, "pnp_assign_resources failed (%d)\n", ret); + pnp_clean_resource_table(dev); + } else + dbg_pnp_show_resources(dev, "pnp_assign_resources succeeded"); + return ret; } /** @@ -332,29 +283,25 @@ fail: */ int pnp_auto_config_dev(struct pnp_dev *dev) { - struct pnp_option *dep; - int i = 1; + int i, ret; if (!pnp_can_configure(dev)) { dev_dbg(&dev->dev, "configuration not supported\n"); return -ENODEV; } - if (!dev->dependent) { - if (pnp_assign_resources(dev, 0)) + ret = pnp_assign_resources(dev, 0); + if (ret == 0) + return 0; + + for (i = 1; i < dev->num_dependent_sets; i++) { + ret = pnp_assign_resources(dev, i); + if (ret == 0) return 0; - } else { - dep = dev->dependent; - do { - if (pnp_assign_resources(dev, i)) - return 0; - dep = dep->next; - i++; - } while (dep); } dev_err(&dev->dev, "unable to assign resources\n"); - return -EBUSY; + return ret; } /** diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index e114b3d2b933..c2f59f4d20bc 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -407,7 +407,7 @@ int pnpacpi_parse_allocated_resource(struct pnp_dev *dev) } static __init void pnpacpi_parse_dma_option(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, struct acpi_resource_dma *p) { int i; @@ -420,11 +420,11 @@ static __init void pnpacpi_parse_dma_option(struct pnp_dev *dev, map |= 1 << p->channels[i]; flags = dma_flags(p->type, p->bus_master, p->transfer); - pnp_register_dma_resource(dev, option, map, flags); + pnp_register_dma_resource(dev, option_flags, map, flags); } static __init void pnpacpi_parse_irq_option(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, struct acpi_resource_irq *p) { int i; @@ -440,11 +440,11 @@ static __init void pnpacpi_parse_irq_option(struct pnp_dev *dev, __set_bit(p->interrupts[i], map.bits); flags = irq_flags(p->triggering, p->polarity, p->sharable); - pnp_register_irq_resource(dev, option, &map, flags); + pnp_register_irq_resource(dev, option_flags, &map, flags); } static __init void pnpacpi_parse_ext_irq_option(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, struct acpi_resource_extended_irq *p) { int i; @@ -467,11 +467,11 @@ static __init void pnpacpi_parse_ext_irq_option(struct pnp_dev *dev, } flags = irq_flags(p->triggering, p->polarity, p->sharable); - pnp_register_irq_resource(dev, option, &map, flags); + pnp_register_irq_resource(dev, option_flags, &map, flags); } static __init void pnpacpi_parse_port_option(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, struct acpi_resource_io *io) { unsigned char flags = 0; @@ -481,23 +481,23 @@ static __init void pnpacpi_parse_port_option(struct pnp_dev *dev, if (io->io_decode == ACPI_DECODE_16) flags = IORESOURCE_IO_16BIT_ADDR; - pnp_register_port_resource(dev, option, io->minimum, io->maximum, + pnp_register_port_resource(dev, option_flags, io->minimum, io->maximum, io->alignment, io->address_length, flags); } static __init void pnpacpi_parse_fixed_port_option(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, struct acpi_resource_fixed_io *io) { if (io->address_length == 0) return; - pnp_register_port_resource(dev, option, io->address, io->address, 0, - io->address_length, IORESOURCE_IO_FIXED); + pnp_register_port_resource(dev, option_flags, io->address, io->address, + 0, io->address_length, IORESOURCE_IO_FIXED); } static __init void pnpacpi_parse_mem24_option(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, struct acpi_resource_memory24 *p) { unsigned char flags = 0; @@ -507,12 +507,12 @@ static __init void pnpacpi_parse_mem24_option(struct pnp_dev *dev, if (p->write_protect == ACPI_READ_WRITE_MEMORY) flags = IORESOURCE_MEM_WRITEABLE; - pnp_register_mem_resource(dev, option, p->minimum, p->maximum, + pnp_register_mem_resource(dev, option_flags, p->minimum, p->maximum, p->alignment, p->address_length, flags); } static __init void pnpacpi_parse_mem32_option(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, struct acpi_resource_memory32 *p) { unsigned char flags = 0; @@ -522,12 +522,12 @@ static __init void pnpacpi_parse_mem32_option(struct pnp_dev *dev, if (p->write_protect == ACPI_READ_WRITE_MEMORY) flags = IORESOURCE_MEM_WRITEABLE; - pnp_register_mem_resource(dev, option, p->minimum, p->maximum, + pnp_register_mem_resource(dev, option_flags, p->minimum, p->maximum, p->alignment, p->address_length, flags); } static __init void pnpacpi_parse_fixed_mem32_option(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, struct acpi_resource_fixed_memory32 *p) { unsigned char flags = 0; @@ -537,12 +537,12 @@ static __init void pnpacpi_parse_fixed_mem32_option(struct pnp_dev *dev, if (p->write_protect == ACPI_READ_WRITE_MEMORY) flags = IORESOURCE_MEM_WRITEABLE; - pnp_register_mem_resource(dev, option, p->address, p->address, + pnp_register_mem_resource(dev, option_flags, p->address, p->address, 0, p->address_length, flags); } static __init void pnpacpi_parse_address_option(struct pnp_dev *dev, - struct pnp_option *option, + unsigned int option_flags, struct acpi_resource *r) { struct acpi_resource_address64 addr, *p = &addr; @@ -562,18 +562,18 @@ static __init void pnpacpi_parse_address_option(struct pnp_dev *dev, if (p->resource_type == ACPI_MEMORY_RANGE) { if (p->info.mem.write_protect == ACPI_READ_WRITE_MEMORY) flags = IORESOURCE_MEM_WRITEABLE; - pnp_register_mem_resource(dev, option, p->minimum, p->minimum, - 0, p->address_length, flags); + pnp_register_mem_resource(dev, option_flags, p->minimum, + p->minimum, 0, p->address_length, + flags); } else if (p->resource_type == ACPI_IO_RANGE) - pnp_register_port_resource(dev, option, p->minimum, p->minimum, - 0, p->address_length, + pnp_register_port_resource(dev, option_flags, p->minimum, + p->minimum, 0, p->address_length, IORESOURCE_IO_FIXED); } struct acpipnp_parse_option_s { - struct pnp_option *option; - struct pnp_option *option_independent; struct pnp_dev *dev; + unsigned int option_flags; }; static __init acpi_status pnpacpi_option_resource(struct acpi_resource *res, @@ -582,15 +582,15 @@ static __init acpi_status pnpacpi_option_resource(struct acpi_resource *res, int priority; struct acpipnp_parse_option_s *parse_data = data; struct pnp_dev *dev = parse_data->dev; - struct pnp_option *option = parse_data->option; + unsigned int option_flags = parse_data->option_flags; switch (res->type) { case ACPI_RESOURCE_TYPE_IRQ: - pnpacpi_parse_irq_option(dev, option, &res->data.irq); + pnpacpi_parse_irq_option(dev, option_flags, &res->data.irq); break; case ACPI_RESOURCE_TYPE_DMA: - pnpacpi_parse_dma_option(dev, option, &res->data.dma); + pnpacpi_parse_dma_option(dev, option_flags, &res->data.dma); break; case ACPI_RESOURCE_TYPE_START_DEPENDENT: @@ -610,31 +610,19 @@ static __init acpi_status pnpacpi_option_resource(struct acpi_resource *res, priority = PNP_RES_PRIORITY_INVALID; break; } - /* TBD: Consider performance/robustness bits */ - option = pnp_register_dependent_option(dev, priority); - if (!option) - return AE_ERROR; - parse_data->option = option; + parse_data->option_flags = pnp_new_dependent_set(dev, priority); break; case ACPI_RESOURCE_TYPE_END_DEPENDENT: - /*only one EndDependentFn is allowed */ - if (!parse_data->option_independent) { - dev_warn(&dev->dev, "more than one EndDependentFn " - "in _PRS\n"); - return AE_ERROR; - } - parse_data->option = parse_data->option_independent; - parse_data->option_independent = NULL; - dev_dbg(&dev->dev, "end dependent options\n"); + parse_data->option_flags = 0; break; case ACPI_RESOURCE_TYPE_IO: - pnpacpi_parse_port_option(dev, option, &res->data.io); + pnpacpi_parse_port_option(dev, option_flags, &res->data.io); break; case ACPI_RESOURCE_TYPE_FIXED_IO: - pnpacpi_parse_fixed_port_option(dev, option, + pnpacpi_parse_fixed_port_option(dev, option_flags, &res->data.fixed_io); break; @@ -643,29 +631,31 @@ static __init acpi_status pnpacpi_option_resource(struct acpi_resource *res, break; case ACPI_RESOURCE_TYPE_MEMORY24: - pnpacpi_parse_mem24_option(dev, option, &res->data.memory24); + pnpacpi_parse_mem24_option(dev, option_flags, + &res->data.memory24); break; case ACPI_RESOURCE_TYPE_MEMORY32: - pnpacpi_parse_mem32_option(dev, option, &res->data.memory32); + pnpacpi_parse_mem32_option(dev, option_flags, + &res->data.memory32); break; case ACPI_RESOURCE_TYPE_FIXED_MEMORY32: - pnpacpi_parse_fixed_mem32_option(dev, option, + pnpacpi_parse_fixed_mem32_option(dev, option_flags, &res->data.fixed_memory32); break; case ACPI_RESOURCE_TYPE_ADDRESS16: case ACPI_RESOURCE_TYPE_ADDRESS32: case ACPI_RESOURCE_TYPE_ADDRESS64: - pnpacpi_parse_address_option(dev, option, res); + pnpacpi_parse_address_option(dev, option_flags, res); break; case ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64: break; case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: - pnpacpi_parse_ext_irq_option(dev, option, + pnpacpi_parse_ext_irq_option(dev, option_flags, &res->data.extended_irq); break; @@ -689,12 +679,9 @@ int __init pnpacpi_parse_resource_option_data(struct pnp_dev *dev) dev_dbg(&dev->dev, "parse resource options\n"); - parse_data.option = pnp_register_independent_option(dev); - if (!parse_data.option) - return -ENOMEM; - - parse_data.option_independent = parse_data.option; parse_data.dev = dev; + parse_data.option_flags = 0; + status = acpi_walk_resources(handle, METHOD_NAME__PRS, pnpacpi_option_resource, &parse_data); diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c index db23ba78d39c..ca567671379e 100644 --- a/drivers/pnp/pnpbios/rsparser.c +++ b/drivers/pnp/pnpbios/rsparser.c @@ -216,7 +216,7 @@ len_err: static __init void pnpbios_parse_mem_option(struct pnp_dev *dev, unsigned char *p, int size, - struct pnp_option *option) + unsigned int option_flags) { resource_size_t min, max, align, len; unsigned char flags; @@ -226,12 +226,13 @@ static __init void pnpbios_parse_mem_option(struct pnp_dev *dev, align = (p[9] << 8) | p[8]; len = ((p[11] << 8) | p[10]) << 8; flags = p[3]; - pnp_register_mem_resource(dev, option, min, max, align, len, flags); + pnp_register_mem_resource(dev, option_flags, min, max, align, len, + flags); } static __init void pnpbios_parse_mem32_option(struct pnp_dev *dev, unsigned char *p, int size, - struct pnp_option *option) + unsigned int option_flags) { resource_size_t min, max, align, len; unsigned char flags; @@ -241,12 +242,13 @@ static __init void pnpbios_parse_mem32_option(struct pnp_dev *dev, align = (p[15] << 24) | (p[14] << 16) | (p[13] << 8) | p[12]; len = (p[19] << 24) | (p[18] << 16) | (p[17] << 8) | p[16]; flags = p[3]; - pnp_register_mem_resource(dev, option, min, max, align, len, flags); + pnp_register_mem_resource(dev, option_flags, min, max, align, len, + flags); } static __init void pnpbios_parse_fixed_mem32_option(struct pnp_dev *dev, unsigned char *p, int size, - struct pnp_option *option) + unsigned int option_flags) { resource_size_t base, len; unsigned char flags; @@ -254,12 +256,12 @@ static __init void pnpbios_parse_fixed_mem32_option(struct pnp_dev *dev, base = (p[7] << 24) | (p[6] << 16) | (p[5] << 8) | p[4]; len = (p[11] << 24) | (p[10] << 16) | (p[9] << 8) | p[8]; flags = p[3]; - pnp_register_mem_resource(dev, option, base, base, 0, len, flags); + pnp_register_mem_resource(dev, option_flags, base, base, 0, len, flags); } static __init void pnpbios_parse_irq_option(struct pnp_dev *dev, unsigned char *p, int size, - struct pnp_option *option) + unsigned int option_flags) { unsigned long bits; pnp_irq_mask_t map; @@ -273,19 +275,19 @@ static __init void pnpbios_parse_irq_option(struct pnp_dev *dev, if (size > 2) flags = p[3]; - pnp_register_irq_resource(dev, option, &map, flags); + pnp_register_irq_resource(dev, option_flags, &map, flags); } static __init void pnpbios_parse_dma_option(struct pnp_dev *dev, unsigned char *p, int size, - struct pnp_option *option) + unsigned int option_flags) { - pnp_register_dma_resource(dev, option, p[1], p[2]); + pnp_register_dma_resource(dev, option_flags, p[1], p[2]); } static __init void pnpbios_parse_port_option(struct pnp_dev *dev, unsigned char *p, int size, - struct pnp_option *option) + unsigned int option_flags) { resource_size_t min, max, align, len; unsigned char flags; @@ -295,38 +297,35 @@ static __init void pnpbios_parse_port_option(struct pnp_dev *dev, align = p[6]; len = p[7]; flags = p[1] ? IORESOURCE_IO_16BIT_ADDR : 0; - pnp_register_port_resource(dev, option, min, max, align, len, flags); + pnp_register_port_resource(dev, option_flags, min, max, align, len, + flags); } static __init void pnpbios_parse_fixed_port_option(struct pnp_dev *dev, unsigned char *p, int size, - struct pnp_option *option) + unsigned int option_flags) { resource_size_t base, len; base = (p[2] << 8) | p[1]; len = p[3]; - pnp_register_port_resource(dev, option, base, base, 0, len, + pnp_register_port_resource(dev, option_flags, base, base, 0, len, IORESOURCE_IO_FIXED); } static __init unsigned char * pnpbios_parse_resource_option_data(unsigned char *p, unsigned char *end, - struct pnp_dev *dev) + struct pnp_dev *dev) { unsigned int len, tag; int priority; - struct pnp_option *option, *option_independent; + unsigned int option_flags; if (!p) return NULL; dev_dbg(&dev->dev, "parse resource options\n"); - - option_independent = option = pnp_register_independent_option(dev); - if (!option) - return NULL; - + option_flags = 0; while ((char *)p < (char *)end) { /* determine the type of tag */ @@ -343,37 +342,38 @@ pnpbios_parse_resource_option_data(unsigned char *p, unsigned char *end, case LARGE_TAG_MEM: if (len != 9) goto len_err; - pnpbios_parse_mem_option(dev, p, len, option); + pnpbios_parse_mem_option(dev, p, len, option_flags); break; case LARGE_TAG_MEM32: if (len != 17) goto len_err; - pnpbios_parse_mem32_option(dev, p, len, option); + pnpbios_parse_mem32_option(dev, p, len, option_flags); break; case LARGE_TAG_FIXEDMEM32: if (len != 9) goto len_err; - pnpbios_parse_fixed_mem32_option(dev, p, len, option); + pnpbios_parse_fixed_mem32_option(dev, p, len, + option_flags); break; case SMALL_TAG_IRQ: if (len < 2 || len > 3) goto len_err; - pnpbios_parse_irq_option(dev, p, len, option); + pnpbios_parse_irq_option(dev, p, len, option_flags); break; case SMALL_TAG_DMA: if (len != 2) goto len_err; - pnpbios_parse_dma_option(dev, p, len, option); + pnpbios_parse_dma_option(dev, p, len, option_flags); break; case SMALL_TAG_PORT: if (len != 7) goto len_err; - pnpbios_parse_port_option(dev, p, len, option); + pnpbios_parse_port_option(dev, p, len, option_flags); break; case SMALL_TAG_VENDOR: @@ -383,7 +383,8 @@ pnpbios_parse_resource_option_data(unsigned char *p, unsigned char *end, case SMALL_TAG_FIXEDPORT: if (len != 3) goto len_err; - pnpbios_parse_fixed_port_option(dev, p, len, option); + pnpbios_parse_fixed_port_option(dev, p, len, + option_flags); break; case SMALL_TAG_STARTDEP: @@ -392,19 +393,13 @@ pnpbios_parse_resource_option_data(unsigned char *p, unsigned char *end, priority = PNP_RES_PRIORITY_ACCEPTABLE; if (len > 0) priority = p[1]; - option = pnp_register_dependent_option(dev, priority); - if (!option) - return NULL; + option_flags = pnp_new_dependent_set(dev, priority); break; case SMALL_TAG_ENDDEP: if (len != 0) goto len_err; - if (option_independent == option) - dev_warn(&dev->dev, "missing " - "SMALL_TAG_STARTDEP tag\n"); - option = option_independent; - dev_dbg(&dev->dev, "end dependent options\n"); + option_flags = 0; break; case SMALL_TAG_END: diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index e8515ce0d296..55f55ed72dc7 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -5,6 +5,8 @@ * when building up the resource structure for the first time. * * Copyright (c) 2000 Peter Denison + * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas * * Heavily based on PCI quirks handling which is * @@ -20,189 +22,207 @@ #include #include "base.h" +static void quirk_awe32_add_ports(struct pnp_dev *dev, + struct pnp_option *option, + unsigned int offset) +{ + struct pnp_option *new_option; + + new_option = kmalloc(sizeof(struct pnp_option), GFP_KERNEL); + if (!new_option) { + dev_err(&dev->dev, "couldn't add ioport region to option set " + "%d\n", pnp_option_set(option)); + return; + } + + *new_option = *option; + new_option->u.port.min += offset; + new_option->u.port.max += offset; + list_add(&new_option->list, &option->list); + + dev_info(&dev->dev, "added ioport region %#llx-%#llx to set %d\n", + (unsigned long long) new_option->u.port.min, + (unsigned long long) new_option->u.port.max, + pnp_option_set(option)); +} + static void quirk_awe32_resources(struct pnp_dev *dev) { - struct pnp_port *port, *port2, *port3; - struct pnp_option *res = dev->dependent; + struct pnp_option *option; + unsigned int set = ~0; /* - * Unfortunately the isapnp_add_port_resource is too tightly bound - * into the PnP discovery sequence, and cannot be used. Link in the - * two extra ports (at offset 0x400 and 0x800 from the one given) by - * hand. + * Add two extra ioport regions (at offset 0x400 and 0x800 from the + * one given) to every dependent option set. */ - for (; res; res = res->next) { - port2 = pnp_alloc(sizeof(struct pnp_port)); - if (!port2) - return; - port3 = pnp_alloc(sizeof(struct pnp_port)); - if (!port3) { - kfree(port2); - return; + list_for_each_entry(option, &dev->options, list) { + if (pnp_option_is_dependent(option) && + pnp_option_set(option) != set) { + set = pnp_option_set(option); + quirk_awe32_add_ports(dev, option, 0x800); + quirk_awe32_add_ports(dev, option, 0x400); } - port = res->port; - memcpy(port2, port, sizeof(struct pnp_port)); - memcpy(port3, port, sizeof(struct pnp_port)); - port->next = port2; - port2->next = port3; - port2->min += 0x400; - port2->max += 0x400; - port3->min += 0x800; - port3->max += 0x800; - dev_info(&dev->dev, - "AWE32 quirk - added ioports 0x%lx and 0x%lx\n", - (unsigned long)port2->min, - (unsigned long)port3->min); } } static void quirk_cmi8330_resources(struct pnp_dev *dev) { - struct pnp_option *res = dev->dependent; - unsigned long tmp; - - for (; res; res = res->next) { - - struct pnp_irq *irq; - struct pnp_dma *dma; + struct pnp_option *option; + struct pnp_irq *irq; + struct pnp_dma *dma; - for (irq = res->irq; irq; irq = irq->next) { - /* Valid irqs are 5, 7, 10 */ - tmp = 0x04A0; - bitmap_copy(irq->map.bits, &tmp, 16); - } + list_for_each_entry(option, &dev->options, list) { + if (!pnp_option_is_dependent(option)) + continue; - for (dma = res->dma; dma; dma = dma->next) { - /* Valid 8bit dma channels are 1,3 */ + if (option->type == IORESOURCE_IRQ) { + irq = &option->u.irq; + bitmap_zero(irq->map.bits, PNP_IRQ_NR); + __set_bit(5, irq->map.bits); + __set_bit(7, irq->map.bits); + __set_bit(10, irq->map.bits); + dev_info(&dev->dev, "set possible IRQs in " + "option set %d to 5, 7, 10\n", + pnp_option_set(option)); + } else if (option->type == IORESOURCE_DMA) { + dma = &option->u.dma; if ((dma->flags & IORESOURCE_DMA_TYPE_MASK) == - IORESOURCE_DMA_8BIT) - dma->map = 0x000A; + IORESOURCE_DMA_8BIT && + dma->map != 0x0A) { + dev_info(&dev->dev, "changing possible " + "DMA channel mask in option set %d " + "from %#02x to 0x0A (1, 3)\n", + pnp_option_set(option), dma->map); + dma->map = 0x0A; + } } } - dev_info(&dev->dev, "CMI8330 quirk - forced possible IRQs to 5, 7, 10 " - "and DMA channels to 1, 3\n"); } static void quirk_sb16audio_resources(struct pnp_dev *dev) { + struct pnp_option *option; + unsigned int prev_option_flags = ~0, n = 0; struct pnp_port *port; - struct pnp_option *res = dev->dependent; - int changed = 0; /* - * The default range on the mpu port for these devices is 0x388-0x388. + * The default range on the OPL port for these devices is 0x388-0x388. * Here we increase that range so that two such cards can be * auto-configured. */ + list_for_each_entry(option, &dev->options, list) { + if (prev_option_flags != option->flags) { + prev_option_flags = option->flags; + n = 0; + } - for (; res; res = res->next) { - port = res->port; - if (!port) - continue; - port = port->next; - if (!port) - continue; - port = port->next; - if (!port) - continue; - if (port->min != port->max) - continue; - port->max += 0x70; - changed = 1; + if (pnp_option_is_dependent(option) && + option->type == IORESOURCE_IO) { + n++; + port = &option->u.port; + if (n == 3 && port->min == port->max) { + port->max += 0x70; + dev_info(&dev->dev, "increased option port " + "range from %#llx-%#llx to " + "%#llx-%#llx\n", + (unsigned long long) port->min, + (unsigned long long) port->min, + (unsigned long long) port->min, + (unsigned long long) port->max); + } + } } - if (changed) - dev_info(&dev->dev, "SB audio device quirk - increased port range\n"); } -static struct pnp_option *quirk_isapnp_mpu_options(struct pnp_dev *dev) +static struct pnp_option *pnp_clone_dependent_set(struct pnp_dev *dev, + unsigned int set) { - struct pnp_option *head = NULL; - struct pnp_option *prev = NULL; - struct pnp_option *res; - - /* - * Build a functional IRQ-optional variant of each MPU option. - */ - - for (res = dev->dependent; res; res = res->next) { - struct pnp_option *curr; - struct pnp_port *port; - struct pnp_port *copy_port; - struct pnp_irq *irq; - struct pnp_irq *copy_irq; - - port = res->port; - irq = res->irq; - if (!port || !irq) - continue; + struct pnp_option *tail = NULL, *first_new_option = NULL; + struct pnp_option *option, *new_option; + unsigned int flags; - copy_port = pnp_alloc(sizeof *copy_port); - if (!copy_port) - break; - - copy_irq = pnp_alloc(sizeof *copy_irq); - if (!copy_irq) { - kfree(copy_port); - break; - } + list_for_each_entry(option, &dev->options, list) { + if (pnp_option_is_dependent(option)) + tail = option; + } + if (!tail) { + dev_err(&dev->dev, "no dependent option sets\n"); + return NULL; + } - *copy_port = *port; - copy_port->next = NULL; + flags = pnp_new_dependent_set(dev, PNP_RES_PRIORITY_FUNCTIONAL); + list_for_each_entry(option, &dev->options, list) { + if (pnp_option_is_dependent(option) && + pnp_option_set(option) == set) { + new_option = kmalloc(sizeof(struct pnp_option), + GFP_KERNEL); + if (!new_option) { + dev_err(&dev->dev, "couldn't clone dependent " + "set %d\n", set); + return NULL; + } - *copy_irq = *irq; - copy_irq->flags |= IORESOURCE_IRQ_OPTIONAL; - copy_irq->next = NULL; + *new_option = *option; + new_option->flags = flags; + if (!first_new_option) + first_new_option = new_option; - curr = pnp_build_option(PNP_RES_PRIORITY_FUNCTIONAL); - if (!curr) { - kfree(copy_port); - kfree(copy_irq); - break; + list_add(&new_option->list, &tail->list); + tail = new_option; } - curr->port = copy_port; - curr->irq = copy_irq; - - if (prev) - prev->next = curr; - else - head = curr; - prev = curr; } - if (head) - dev_info(&dev->dev, "adding IRQ-optional MPU options\n"); - return head; + return first_new_option; } -static void quirk_ad1815_mpu_resources(struct pnp_dev *dev) + +static void quirk_add_irq_optional_dependent_sets(struct pnp_dev *dev) { - struct pnp_option *res; + struct pnp_option *new_option; + unsigned int num_sets, i, set; struct pnp_irq *irq; - res = dev->independent; - if (!res) - return; + num_sets = dev->num_dependent_sets; + for (i = 0; i < num_sets; i++) { + new_option = pnp_clone_dependent_set(dev, i); + if (!new_option) + return; - irq = res->irq; - if (!irq || irq->next) - return; + set = pnp_option_set(new_option); + while (new_option && pnp_option_set(new_option) == set) { + if (new_option->type == IORESOURCE_IRQ) { + irq = &new_option->u.irq; + irq->flags |= IORESOURCE_IRQ_OPTIONAL; + } + dbg_pnp_show_option(dev, new_option); + new_option = list_entry(new_option->list.next, + struct pnp_option, list); + } - irq->flags |= IORESOURCE_IRQ_OPTIONAL; - dev_info(&dev->dev, "made independent IRQ optional\n"); + dev_info(&dev->dev, "added dependent option set %d (same as " + "set %d except IRQ optional)\n", set, i); + } } -static void quirk_isapnp_mpu_resources(struct pnp_dev *dev) +static void quirk_ad1815_mpu_resources(struct pnp_dev *dev) { - struct pnp_option *res; + struct pnp_option *option; + struct pnp_irq *irq = NULL; + unsigned int independent_irqs = 0; + + list_for_each_entry(option, &dev->options, list) { + if (option->type == IORESOURCE_IRQ && + !pnp_option_is_dependent(option)) { + independent_irqs++; + irq = &option->u.irq; + } + } - res = dev->dependent; - if (!res) + if (independent_irqs != 1) return; - while (res->next) - res = res->next; - - res->next = quirk_isapnp_mpu_options(dev); + irq->flags |= IORESOURCE_IRQ_OPTIONAL; + dev_info(&dev->dev, "made independent IRQ optional\n"); } #include @@ -297,10 +317,10 @@ static struct pnp_fixup pnp_fixups[] = { {"CTL0043", quirk_sb16audio_resources}, {"CTL0044", quirk_sb16audio_resources}, {"CTL0045", quirk_sb16audio_resources}, - /* Add IRQ-less MPU options */ + /* Add IRQ-optional MPU options */ {"ADS7151", quirk_ad1815_mpu_resources}, - {"ADS7181", quirk_isapnp_mpu_resources}, - {"AZT0002", quirk_isapnp_mpu_resources}, + {"ADS7181", quirk_add_irq_optional_dependent_sets}, + {"AZT0002", quirk_add_irq_optional_dependent_sets}, /* PnP resources that might overlap PCI BARs */ {"PNP0c01", quirk_system_pci_resources}, {"PNP0c02", quirk_system_pci_resources}, diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c index a795864dc695..d6388970a1a4 100644 --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c @@ -3,6 +3,8 @@ * * based on isapnp.c resource management (c) Jaroslav Kysela * Copyright 2003 Adam Belay + * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas */ #include @@ -28,78 +30,36 @@ static int pnp_reserve_mem[16] = {[0 ... 15] = -1 }; /* reserve (don't use) some * option registration */ -struct pnp_option *pnp_build_option(int priority) +struct pnp_option *pnp_build_option(struct pnp_dev *dev, unsigned long type, + unsigned int option_flags) { - struct pnp_option *option = pnp_alloc(sizeof(struct pnp_option)); + struct pnp_option *option; + option = kzalloc(sizeof(struct pnp_option), GFP_KERNEL); if (!option) return NULL; - option->priority = priority & 0xff; - /* make sure the priority is valid */ - if (option->priority > PNP_RES_PRIORITY_FUNCTIONAL) - option->priority = PNP_RES_PRIORITY_INVALID; - - return option; -} - -struct pnp_option *pnp_register_independent_option(struct pnp_dev *dev) -{ - struct pnp_option *option; - - option = pnp_build_option(PNP_RES_PRIORITY_PREFERRED); - - /* this should never happen but if it does we'll try to continue */ - if (dev->independent) - dev_err(&dev->dev, "independent resource already registered\n"); - dev->independent = option; - - dev_dbg(&dev->dev, "new independent option\n"); - return option; -} - -struct pnp_option *pnp_register_dependent_option(struct pnp_dev *dev, - int priority) -{ - struct pnp_option *option; + option->flags = option_flags; + option->type = type; - option = pnp_build_option(priority); - - if (dev->dependent) { - struct pnp_option *parent = dev->dependent; - while (parent->next) - parent = parent->next; - parent->next = option; - } else - dev->dependent = option; - - dev_dbg(&dev->dev, "new dependent option (priority %#x)\n", priority); + list_add_tail(&option->list, &dev->options); return option; } -int pnp_register_irq_resource(struct pnp_dev *dev, struct pnp_option *option, +int pnp_register_irq_resource(struct pnp_dev *dev, unsigned int option_flags, pnp_irq_mask_t *map, unsigned char flags) { - struct pnp_irq *irq, *ptr; -#ifdef DEBUG - char buf[PNP_IRQ_NR]; /* hex-encoded, so this is overkill but safe */ -#endif + struct pnp_option *option; + struct pnp_irq *irq; - irq = kzalloc(sizeof(struct pnp_irq), GFP_KERNEL); - if (!irq) + option = pnp_build_option(dev, IORESOURCE_IRQ, option_flags); + if (!option) return -ENOMEM; + irq = &option->u.irq; irq->map = *map; irq->flags = flags; - ptr = option->irq; - while (ptr && ptr->next) - ptr = ptr->next; - if (ptr) - ptr->next = irq; - else - option->irq = irq; - #ifdef CONFIG_PCI { int i; @@ -110,163 +70,81 @@ int pnp_register_irq_resource(struct pnp_dev *dev, struct pnp_option *option, } #endif -#ifdef DEBUG - bitmap_scnprintf(buf, sizeof(buf), irq->map.bits, PNP_IRQ_NR); - dev_dbg(&dev->dev, " irq bitmask %s flags %#x\n", buf, - irq->flags); -#endif + dbg_pnp_show_option(dev, option); return 0; } -int pnp_register_dma_resource(struct pnp_dev *dev, struct pnp_option *option, +int pnp_register_dma_resource(struct pnp_dev *dev, unsigned int option_flags, unsigned char map, unsigned char flags) { - struct pnp_dma *dma, *ptr; + struct pnp_option *option; + struct pnp_dma *dma; - dma = kzalloc(sizeof(struct pnp_dma), GFP_KERNEL); - if (!dma) + option = pnp_build_option(dev, IORESOURCE_DMA, option_flags); + if (!option) return -ENOMEM; + dma = &option->u.dma; dma->map = map; dma->flags = flags; - ptr = option->dma; - while (ptr && ptr->next) - ptr = ptr->next; - if (ptr) - ptr->next = dma; - else - option->dma = dma; - - dev_dbg(&dev->dev, " dma bitmask %#x flags %#x\n", dma->map, - dma->flags); + dbg_pnp_show_option(dev, option); return 0; } -int pnp_register_port_resource(struct pnp_dev *dev, struct pnp_option *option, +int pnp_register_port_resource(struct pnp_dev *dev, unsigned int option_flags, resource_size_t min, resource_size_t max, resource_size_t align, resource_size_t size, unsigned char flags) { - struct pnp_port *port, *ptr; + struct pnp_option *option; + struct pnp_port *port; - port = kzalloc(sizeof(struct pnp_port), GFP_KERNEL); - if (!port) + option = pnp_build_option(dev, IORESOURCE_IO, option_flags); + if (!option) return -ENOMEM; + port = &option->u.port; port->min = min; port->max = max; port->align = align; port->size = size; port->flags = flags; - ptr = option->port; - while (ptr && ptr->next) - ptr = ptr->next; - if (ptr) - ptr->next = port; - else - option->port = port; - - dev_dbg(&dev->dev, " io " - "min %#llx max %#llx align %lld size %lld flags %#x\n", - (unsigned long long) port->min, - (unsigned long long) port->max, - (unsigned long long) port->align, - (unsigned long long) port->size, port->flags); + dbg_pnp_show_option(dev, option); return 0; } -int pnp_register_mem_resource(struct pnp_dev *dev, struct pnp_option *option, +int pnp_register_mem_resource(struct pnp_dev *dev, unsigned int option_flags, resource_size_t min, resource_size_t max, resource_size_t align, resource_size_t size, unsigned char flags) { - struct pnp_mem *mem, *ptr; + struct pnp_option *option; + struct pnp_mem *mem; - mem = kzalloc(sizeof(struct pnp_mem), GFP_KERNEL); - if (!mem) + option = pnp_build_option(dev, IORESOURCE_MEM, option_flags); + if (!option) return -ENOMEM; + mem = &option->u.mem; mem->min = min; mem->max = max; mem->align = align; mem->size = size; mem->flags = flags; - ptr = option->mem; - while (ptr && ptr->next) - ptr = ptr->next; - if (ptr) - ptr->next = mem; - else - option->mem = mem; - - dev_dbg(&dev->dev, " mem " - "min %#llx max %#llx align %lld size %lld flags %#x\n", - (unsigned long long) mem->min, - (unsigned long long) mem->max, - (unsigned long long) mem->align, - (unsigned long long) mem->size, mem->flags); + dbg_pnp_show_option(dev, option); return 0; } -static void pnp_free_port(struct pnp_port *port) -{ - struct pnp_port *next; - - while (port) { - next = port->next; - kfree(port); - port = next; - } -} - -static void pnp_free_irq(struct pnp_irq *irq) -{ - struct pnp_irq *next; - - while (irq) { - next = irq->next; - kfree(irq); - irq = next; - } -} - -static void pnp_free_dma(struct pnp_dma *dma) -{ - struct pnp_dma *next; - - while (dma) { - next = dma->next; - kfree(dma); - dma = next; - } -} - -static void pnp_free_mem(struct pnp_mem *mem) +void pnp_free_options(struct pnp_dev *dev) { - struct pnp_mem *next; - - while (mem) { - next = mem->next; - kfree(mem); - mem = next; - } -} + struct pnp_option *option, *tmp; -void pnp_free_option(struct pnp_option *option) -{ - struct pnp_option *next; - - while (option) { - next = option->next; - pnp_free_port(option->port); - pnp_free_irq(option->irq); - pnp_free_dma(option->dma); - pnp_free_mem(option->mem); + list_for_each_entry_safe(option, tmp, &dev->options, list) { + list_del(&option->list); kfree(option); - option = next; } } @@ -668,66 +546,50 @@ struct pnp_resource *pnp_add_mem_resource(struct pnp_dev *dev, return pnp_res; } -static int pnp_possible_option(struct pnp_option *option, int type, - resource_size_t start, resource_size_t size) +/* + * Determine whether the specified resource is a possible configuration + * for this device. + */ +int pnp_possible_config(struct pnp_dev *dev, int type, resource_size_t start, + resource_size_t size) { - struct pnp_option *tmp; + struct pnp_option *option; struct pnp_port *port; struct pnp_mem *mem; struct pnp_irq *irq; struct pnp_dma *dma; - if (!option) - return 0; + list_for_each_entry(option, &dev->options, list) { + if (option->type != type) + continue; - for (tmp = option; tmp; tmp = tmp->next) { - switch (type) { + switch (option->type) { case IORESOURCE_IO: - for (port = tmp->port; port; port = port->next) { - if (port->min == start && port->size == size) - return 1; - } + port = &option->u.port; + if (port->min == start && port->size == size) + return 1; break; case IORESOURCE_MEM: - for (mem = tmp->mem; mem; mem = mem->next) { - if (mem->min == start && mem->size == size) - return 1; - } + mem = &option->u.mem; + if (mem->min == start && mem->size == size) + return 1; break; case IORESOURCE_IRQ: - for (irq = tmp->irq; irq; irq = irq->next) { - if (start < PNP_IRQ_NR && - test_bit(start, irq->map.bits)) - return 1; - } + irq = &option->u.irq; + if (start < PNP_IRQ_NR && + test_bit(start, irq->map.bits)) + return 1; break; case IORESOURCE_DMA: - for (dma = tmp->dma; dma; dma = dma->next) { - if (dma->map & (1 << start)) - return 1; - } + dma = &option->u.dma; + if (dma->map & (1 << start)) + return 1; break; } } return 0; } - -/* - * Determine whether the specified resource is a possible configuration - * for this device. - */ -int pnp_possible_config(struct pnp_dev *dev, int type, resource_size_t start, - resource_size_t size) -{ - if (pnp_possible_option(dev->independent, type, start, size)) - return 1; - - if (pnp_possible_option(dev->dependent, type, start, size)) - return 1; - - return 0; -} EXPORT_SYMBOL(pnp_possible_config); /* format is: pnp_reserve_irq=irq1[,irq2] .... */ diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c index 0ad42db94884..bbf78ef4ba02 100644 --- a/drivers/pnp/support.c +++ b/drivers/pnp/support.c @@ -2,6 +2,8 @@ * support.c - standard functions for the use of pnp protocol drivers * * Copyright 2003 Adam Belay + * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas */ #include @@ -117,3 +119,93 @@ void dbg_pnp_show_resources(struct pnp_dev *dev, char *desc) } #endif } + +char *pnp_option_priority_name(struct pnp_option *option) +{ + switch (pnp_option_priority(option)) { + case PNP_RES_PRIORITY_PREFERRED: + return "preferred"; + case PNP_RES_PRIORITY_ACCEPTABLE: + return "acceptable"; + case PNP_RES_PRIORITY_FUNCTIONAL: + return "functional"; + } + return "invalid"; +} + +void dbg_pnp_show_option(struct pnp_dev *dev, struct pnp_option *option) +{ +#ifdef DEBUG + char buf[128]; + int len = 0, i; + struct pnp_port *port; + struct pnp_mem *mem; + struct pnp_irq *irq; + struct pnp_dma *dma; + + if (pnp_option_is_dependent(option)) + len += snprintf(buf + len, sizeof(buf) - len, + " dependent set %d (%s) ", + pnp_option_set(option), + pnp_option_priority_name(option)); + else + len += snprintf(buf + len, sizeof(buf) - len, " independent "); + + switch (option->type) { + case IORESOURCE_IO: + port = &option->u.port; + len += snprintf(buf + len, sizeof(buf) - len, "io min %#llx " + "max %#llx align %lld size %lld flags %#x", + (unsigned long long) port->min, + (unsigned long long) port->max, + (unsigned long long) port->align, + (unsigned long long) port->size, port->flags); + break; + case IORESOURCE_MEM: + mem = &option->u.mem; + len += snprintf(buf + len, sizeof(buf) - len, "mem min %#llx " + "max %#llx align %lld size %lld flags %#x", + (unsigned long long) mem->min, + (unsigned long long) mem->max, + (unsigned long long) mem->align, + (unsigned long long) mem->size, mem->flags); + break; + case IORESOURCE_IRQ: + irq = &option->u.irq; + len += snprintf(buf + len, sizeof(buf) - len, "irq"); + if (bitmap_empty(irq->map.bits, PNP_IRQ_NR)) + len += snprintf(buf + len, sizeof(buf) - len, + " "); + else { + for (i = 0; i < PNP_IRQ_NR; i++) + if (test_bit(i, irq->map.bits)) + len += snprintf(buf + len, + sizeof(buf) - len, + " %d", i); + } + len += snprintf(buf + len, sizeof(buf) - len, " flags %#x", + irq->flags); + if (irq->flags & IORESOURCE_IRQ_OPTIONAL) + len += snprintf(buf + len, sizeof(buf) - len, + " (optional)"); + break; + case IORESOURCE_DMA: + dma = &option->u.dma; + len += snprintf(buf + len, sizeof(buf) - len, "dma"); + if (!dma->map) + len += snprintf(buf + len, sizeof(buf) - len, + " "); + else { + for (i = 0; i < 8; i++) + if (dma->map & (1 << i)) + len += snprintf(buf + len, + sizeof(buf) - len, + " %d", i); + } + len += snprintf(buf + len, sizeof(buf) - len, " (bitmask %#x) " + "flags %#x", dma->map, dma->flags); + break; + } + dev_dbg(&dev->dev, "%s\n", buf); +#endif +} diff --git a/include/linux/pnp.h b/include/linux/pnp.h index 785126ffcc11..1ce54b63085d 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -1,6 +1,8 @@ /* * Linux Plug and Play Support * Copyright by Adam Belay + * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas */ #ifndef _LINUX_PNP_H @@ -249,9 +251,9 @@ struct pnp_dev { int active; int capabilities; - struct pnp_option *independent; - struct pnp_option *dependent; + unsigned int num_dependent_sets; struct list_head resources; + struct list_head options; char name[PNP_NAME_LEN]; /* contains a human-readable name */ int flags; /* used by protocols */ -- cgit v1.2.3 From 84684c7469a2e6fcbf8c808ac5030ba2de14ff77 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:18 -0600 Subject: PNP: avoid legacy IDE IRQs If an IDE controller is in compatibility mode, it expects to use IRQs 14 and 15, so PNP should avoid them. This patch should resolve this problem report: parallel driver grabs IRQ14 preventing legacy SFF ATA controller from working https://bugzilla.novell.com/show_bug.cgi?id=375836 Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/pnp/resource.c | 68 ++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 57 insertions(+), 11 deletions(-) diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c index d6388970a1a4..4cfe3a1efdfb 100644 --- a/drivers/pnp/resource.c +++ b/drivers/pnp/resource.c @@ -286,6 +286,61 @@ static irqreturn_t pnp_test_handler(int irq, void *dev_id) return IRQ_HANDLED; } +#ifdef CONFIG_PCI +static int pci_dev_uses_irq(struct pnp_dev *pnp, struct pci_dev *pci, + unsigned int irq) +{ + u32 class; + u8 progif; + + if (pci->irq == irq) { + dev_dbg(&pnp->dev, "device %s using irq %d\n", + pci_name(pci), irq); + return 1; + } + + /* + * See pci_setup_device() and ata_pci_sff_activate_host() for + * similar IDE legacy detection. + */ + pci_read_config_dword(pci, PCI_CLASS_REVISION, &class); + class >>= 8; /* discard revision ID */ + progif = class & 0xff; + class >>= 8; + + if (class == PCI_CLASS_STORAGE_IDE) { + /* + * Unless both channels are native-PCI mode only, + * treat the compatibility IRQs as busy. + */ + if ((progif & 0x5) != 0x5) + if (pci_get_legacy_ide_irq(pci, 0) == irq || + pci_get_legacy_ide_irq(pci, 1) == irq) { + dev_dbg(&pnp->dev, "legacy IDE device %s " + "using irq %d\n", pci_name(pci), irq); + return 1; + } + } + + return 0; +} +#endif + +static int pci_uses_irq(struct pnp_dev *pnp, unsigned int irq) +{ +#ifdef CONFIG_PCI + struct pci_dev *pci = NULL; + + for_each_pci_dev(pci) { + if (pci_dev_uses_irq(pnp, pci, irq)) { + pci_dev_put(pci); + return 1; + } + } +#endif + return 0; +} + int pnp_check_irq(struct pnp_dev *dev, struct resource *res) { int i; @@ -317,18 +372,9 @@ int pnp_check_irq(struct pnp_dev *dev, struct resource *res) } } -#ifdef CONFIG_PCI /* check if the resource is being used by a pci device */ - { - struct pci_dev *pci = NULL; - for_each_pci_dev(pci) { - if (pci->irq == *irq) { - pci_dev_put(pci); - return 0; - } - } - } -#endif + if (pci_uses_irq(dev, *irq)) + return 0; /* check if the resource is already in use, skip if the * device is active because it itself may be in use */ -- cgit v1.2.3 From 40ab4f4c1d843362eb26d83425317e91fbd98b17 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 16:57:19 -0600 Subject: PNPACPI: add support for HP vendor-specific CCSR descriptors The HP CCSR descriptor describes MMIO address space that should appear as a MEM resource. This patch adds support for parsing these descriptors in the _CRS data. The visible effect of this is that these MEM resources will appear in /sys/devices/pnp0/.../resources, which means that "lspnp -v" will report it, user applications can use this to locate device CSR space, and kernel drivers can use the normal PNP resource accessors to locate them. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/pnp/pnpacpi/rsparser.c | 60 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index c2f59f4d20bc..d7e9f2152df0 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -3,6 +3,8 @@ * * Copyright (c) 2004 Matthieu Castet * Copyright (c) 2004 Li Shaohua + * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -187,6 +189,61 @@ static void pnpacpi_parse_allocated_ioresource(struct pnp_dev *dev, u64 start, pnp_add_io_resource(dev, start, end, flags); } +/* + * Device CSRs that do not appear in PCI config space should be described + * via ACPI. This would normally be done with Address Space Descriptors + * marked as "consumer-only," but old versions of Windows and Linux ignore + * the producer/consumer flag, so HP invented a vendor-defined resource to + * describe the location and size of CSR space. + */ +static struct acpi_vendor_uuid hp_ccsr_uuid = { + .subtype = 2, + .data = { 0xf9, 0xad, 0xe9, 0x69, 0x4f, 0x92, 0x5f, 0xab, 0xf6, 0x4a, + 0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad }, +}; + +static int vendor_resource_matches(struct pnp_dev *dev, + struct acpi_resource_vendor_typed *vendor, + struct acpi_vendor_uuid *match, + int expected_len) +{ + int uuid_len = sizeof(vendor->uuid); + u8 uuid_subtype = vendor->uuid_subtype; + u8 *uuid = vendor->uuid; + int actual_len; + + /* byte_length includes uuid_subtype and uuid */ + actual_len = vendor->byte_length - uuid_len - 1; + + if (uuid_subtype == match->subtype && + uuid_len == sizeof(match->data) && + memcmp(uuid, match->data, uuid_len) == 0) { + if (expected_len && expected_len != actual_len) { + dev_err(&dev->dev, "wrong vendor descriptor size; " + "expected %d, found %d bytes\n", + expected_len, actual_len); + return 0; + } + + return 1; + } + + return 0; +} + +static void pnpacpi_parse_allocated_vendor(struct pnp_dev *dev, + struct acpi_resource_vendor_typed *vendor) +{ + if (vendor_resource_matches(dev, vendor, &hp_ccsr_uuid, 16)) { + u64 start, length; + + memcpy(&start, vendor->byte_data, sizeof(start)); + memcpy(&length, vendor->byte_data + 8, sizeof(length)); + + pnp_add_mem_resource(dev, start, start + length - 1, 0); + } +} + static void pnpacpi_parse_allocated_memresource(struct pnp_dev *dev, u64 start, u64 len, int write_protect) @@ -237,6 +294,7 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res, struct acpi_resource_dma *dma; struct acpi_resource_io *io; struct acpi_resource_fixed_io *fixed_io; + struct acpi_resource_vendor_typed *vendor_typed; struct acpi_resource_memory24 *memory24; struct acpi_resource_memory32 *memory32; struct acpi_resource_fixed_memory32 *fixed_memory32; @@ -306,6 +364,8 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res, break; case ACPI_RESOURCE_TYPE_VENDOR: + vendor_typed = &res->data.vendor_typed; + pnpacpi_parse_allocated_vendor(dev, vendor_typed); break; case ACPI_RESOURCE_TYPE_END_TAG: -- cgit v1.2.3 From c83642d5123225a22cccd75adea6e97c245714cb Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 27 Jun 2008 08:45:39 -0600 Subject: ACPI: use dev_printk when possible Convert printks to use dev_printk(). The most obvious change will be messages like this: -ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 31 (level, low) -> IRQ 31 +cciss 0000:00:04.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown Signed-off-by: Andi Kleen --- drivers/acpi/pci_irq.c | 38 +++++++++++++++++--------------------- 1 file changed, 17 insertions(+), 21 deletions(-) diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index 89022a74faee..11acaee14d66 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -162,7 +162,7 @@ do_prt_fixups(struct acpi_prt_entry *entry, struct acpi_pci_routing_table *prt) !strcmp(prt->source, quirk->source) && strlen(prt->source) >= strlen(quirk->actual_source)) { printk(KERN_WARNING PREFIX "firmware reports " - "%04x:%02x:%02x[%c] connected to %s; " + "%04x:%02x:%02x PCI INT %c connected to %s; " "changing to %s\n", entry->id.segment, entry->id.bus, entry->id.device, 'A' + entry->pin, @@ -429,7 +429,7 @@ acpi_pci_irq_derive(struct pci_dev *dev, { struct pci_dev *bridge = dev; int irq = -1; - u8 bridge_pin = 0; + u8 bridge_pin = 0, orig_pin = pin; if (!dev) @@ -463,8 +463,8 @@ acpi_pci_irq_derive(struct pci_dev *dev, } if (irq < 0) { - printk(KERN_WARNING PREFIX "Unable to derive IRQ for device %s\n", - pci_name(dev)); + dev_warn(&dev->dev, "can't derive routing for PCI INT %c\n", + 'A' + orig_pin); return -1; } @@ -487,6 +487,7 @@ int acpi_pci_irq_enable(struct pci_dev *dev) int triggering = ACPI_LEVEL_SENSITIVE; int polarity = ACPI_ACTIVE_LOW; char *link = NULL; + char link_desc[16]; int rc; @@ -503,7 +504,7 @@ int acpi_pci_irq_enable(struct pci_dev *dev) pin--; if (!dev->bus) { - printk(KERN_ERR PREFIX "Invalid (NULL) 'bus' field\n"); + dev_err(&dev->dev, "invalid (NULL) 'bus' field\n"); return -ENODEV; } @@ -538,8 +539,7 @@ int acpi_pci_irq_enable(struct pci_dev *dev) * driver reported one, then use it. Exit in any case. */ if (irq < 0) { - printk(KERN_WARNING PREFIX "PCI Interrupt %s[%c]: no GSI", - pci_name(dev), ('A' + pin)); + dev_warn(&dev->dev, "PCI INT %c: no GSI", 'A' + pin); /* Interrupt Line values above 0xF are forbidden */ if (dev->irq > 0 && (dev->irq <= 0xF)) { printk(" - using IRQ %d\n", dev->irq); @@ -554,21 +554,21 @@ int acpi_pci_irq_enable(struct pci_dev *dev) rc = acpi_register_gsi(irq, triggering, polarity); if (rc < 0) { - printk(KERN_WARNING PREFIX "PCI Interrupt %s[%c]: failed " - "to register GSI\n", pci_name(dev), ('A' + pin)); + dev_warn(&dev->dev, "PCI INT %c: failed to register GSI\n", + 'A' + pin); return rc; } dev->irq = rc; - printk(KERN_INFO PREFIX "PCI Interrupt %s[%c] -> ", - pci_name(dev), 'A' + pin); - if (link) - printk("Link [%s] -> ", link); + snprintf(link_desc, sizeof(link_desc), " -> Link[%s]", link); + else + link_desc[0] = '\0'; - printk("GSI %u (%s, %s) -> IRQ %d\n", irq, - (triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge", - (polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq); + dev_info(&dev->dev, "PCI INT %c%s -> GSI %u (%s, %s) -> IRQ %d\n", + 'A' + pin, link_desc, irq, + (triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge", + (polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq); return 0; } @@ -616,10 +616,6 @@ void acpi_pci_irq_disable(struct pci_dev *dev) * (e.g. PCI_UNDEFINED_IRQ). */ - printk(KERN_INFO PREFIX "PCI interrupt for device %s disabled\n", - pci_name(dev)); - + dev_info(&dev->dev, "PCI INT %c disabled\n", 'A' + pin); acpi_unregister_gsi(gsi); - - return; } -- cgit v1.2.3 From 4d3870431d17346c4fdd80e087b7d76f1b5941d5 Mon Sep 17 00:00:00 2001 From: Aaron Durbin Date: Wed, 16 Jul 2008 23:27:08 +0200 Subject: Add the ability to reset the machine using the RESET_REG in ACPI's FADT table. Signed-off-by: Aaron Durbin Signed-off-by: Andi Kleen Cc: Len Brown Cc: Andi Kleen Signed-off-by: Andrew Morton --- drivers/acpi/Makefile | 2 +- drivers/acpi/reboot.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/acpi/reboot.h | 14 ++++++++------ 3 files changed, 59 insertions(+), 7 deletions(-) create mode 100644 drivers/acpi/reboot.c diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 40b0fcae4c78..4efbe598c817 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -21,7 +21,7 @@ obj-$(CONFIG_X86) += blacklist.o # # ACPI Core Subsystem (Interpreter) # -obj-y += osl.o utils.o \ +obj-y += osl.o utils.o reboot.o\ dispatcher/ events/ executer/ hardware/ \ namespace/ parser/ resources/ tables/ \ utilities/ diff --git a/drivers/acpi/reboot.c b/drivers/acpi/reboot.c new file mode 100644 index 000000000000..a6b662c00b67 --- /dev/null +++ b/drivers/acpi/reboot.c @@ -0,0 +1,50 @@ + +#include +#include +#include + +void acpi_reboot(void) +{ + struct acpi_generic_address *rr; + struct pci_bus *bus0; + u8 reset_value; + unsigned int devfn; + + if (acpi_disabled) + return; + + rr = &acpi_gbl_FADT.reset_register; + + /* Is the reset register supported? */ + if (!(acpi_gbl_FADT.flags & ACPI_FADT_RESET_REGISTER) || + rr->bit_width != 8 || rr->bit_offset != 0) + return; + + reset_value = acpi_gbl_FADT.reset_value; + + /* The reset register can only exist in I/O, Memory or PCI config space + * on a device on bus 0. */ + switch (rr->space_id) { + case ACPI_ADR_SPACE_PCI_CONFIG: + /* The reset register can only live on bus 0. */ + bus0 = pci_find_bus(0, 0); + if (!bus0) + return; + /* Form PCI device/function pair. */ + devfn = PCI_DEVFN((rr->address >> 32) & 0xffff, + (rr->address >> 16) & 0xffff); + printk(KERN_DEBUG "Resetting with ACPI PCI RESET_REG."); + /* Write the value that resets us. */ + pci_bus_write_config_byte(bus0, devfn, + (rr->address & 0xffff), reset_value); + break; + + case ACPI_ADR_SPACE_SYSTEM_MEMORY: + case ACPI_ADR_SPACE_SYSTEM_IO: + printk(KERN_DEBUG "ACPI MEMORY or I/O RESET_REG.\n"); + acpi_hw_low_level_write(8, reset_value, rr); + break; + } + /* Wait ten seconds */ + acpi_os_stall(10000000); +} diff --git a/include/acpi/reboot.h b/include/acpi/reboot.h index 8857f57e0b78..0419184ce886 100644 --- a/include/acpi/reboot.h +++ b/include/acpi/reboot.h @@ -1,9 +1,11 @@ +#ifndef __ACPI_REBOOT_H +#define __ACPI_REBOOT_H + +#ifdef CONFIG_ACPI +extern void acpi_reboot(void); +#else +static inline void acpi_reboot(void) { } +#endif -/* - * Dummy placeholder to make the EFI patches apply to the x86 tree. - * Andrew/Len, please just kill this file if you encounter it. - */ -#ifndef acpi_reboot -# define acpi_reboot() do { } while (0) #endif -- cgit v1.2.3 From 01a5bba576b9364b33f61f0cd9fa70c2cf5535e2 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 16 Jul 2008 23:27:08 +0200 Subject: Fix FADT parsing The (1.0 inherited) separate length fields in the FADT are byte granular. Further, PM1a/b may have distinct lengths and live in distinct address spaces. acpi_tb_convert_fadt() should account for all of these conditions. Apart from these changes I'm puzzled by the fact that, not just for acpi_gbl_xpm1{a,b}_enable, acpi_hw_low_level_{read,write}() get an explicit size passed rather than using the size found in the passed GAS. What happens on a platform that defines PM1{a,b} wider than 16 bits? Of course, acpi_hw_low_level_{read,write}() at present are entirely un-prepared to deal with sizes other than 8, 16, or 32, not to speak of a non-zero bit_offset or access_width... Signed-off-by: Jan Beulich Signed-off-by: Andi Kleen Cc: Len Brown Signed-off-by: Andrew Morton --- drivers/acpi/tables/tbfadt.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/acpi/tables/tbfadt.c b/drivers/acpi/tables/tbfadt.c index a4a41ba2484b..ccb5b64bbef3 100644 --- a/drivers/acpi/tables/tbfadt.c +++ b/drivers/acpi/tables/tbfadt.c @@ -124,7 +124,7 @@ static struct acpi_fadt_info fadt_info_table[] = { static void inline acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, - u8 bit_width, u64 address) + u8 byte_width, u64 address) { /* @@ -136,7 +136,7 @@ acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, /* All other fields are byte-wide */ generic_address->space_id = ACPI_ADR_SPACE_SYSTEM_IO; - generic_address->bit_width = bit_width; + generic_address->bit_width = byte_width << 3; generic_address->bit_offset = 0; generic_address->access_width = 0; } @@ -343,9 +343,11 @@ static void acpi_tb_convert_fadt(void) * * The PM event blocks are split into two register blocks, first is the * PM Status Register block, followed immediately by the PM Enable Register - * block. Each is of length (pm1_event_length/2) + * block. Each is of length (xpm1x_event_block.bit_width/2) */ - pm1_register_length = (u8) ACPI_DIV_2(acpi_gbl_FADT.pm1_event_length); + WARN_ON(ACPI_MOD_16(acpi_gbl_FADT.xpm1a_event_block.bit_width)); + pm1_register_length = (u8) ACPI_DIV_16(acpi_gbl_FADT + .xpm1a_event_block.bit_width); /* The PM1A register block is required */ @@ -360,14 +362,17 @@ static void acpi_tb_convert_fadt(void) /* The PM1B register block is optional, ignore if not present */ if (acpi_gbl_FADT.xpm1b_event_block.address) { + WARN_ON(ACPI_MOD_16(acpi_gbl_FADT.xpm1b_event_block.bit_width)); + pm1_register_length = (u8) ACPI_DIV_16(acpi_gbl_FADT + .xpm1b_event_block + .bit_width); acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable, pm1_register_length, (acpi_gbl_FADT.xpm1b_event_block. address + pm1_register_length)); /* Don't forget to copy space_id of the GAS */ acpi_gbl_xpm1b_enable.space_id = - acpi_gbl_FADT.xpm1a_event_block.space_id; - + acpi_gbl_FADT.xpm1b_event_block.space_id; } } -- cgit v1.2.3 From d442cc44c0db56e84ef6aa244a88427d2efe06cd Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 16 Jul 2008 16:09:06 -0400 Subject: block: Trivial fix for blk_integrity_rq() Fail integrity check gracefully when request does not have a bio attached (BLOCK_PC). Signed-off-by: Martin K. Petersen Signed-off-by: Linus Torvalds --- include/linux/blkdev.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 32a441b05fd5..88d68081a0f1 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -985,6 +985,9 @@ static inline int bdev_integrity_enabled(struct block_device *bdev, int rw) static inline int blk_integrity_rq(struct request *rq) { + if (rq->bio == NULL) + return 0; + return bio_integrity(rq->bio); } -- cgit v1.2.3 From c0420ad2ca514551ca086510b0e7d17a05c70492 Mon Sep 17 00:00:00 2001 From: Coly Li Date: Mon, 30 Jun 2008 18:45:45 +0800 Subject: [PATCH] ocfs2: fix oops in mmap_truncate testing This patch fixes a mmap_truncate bug which was found by ocfs2 test suite. In an ocfs2 cluster more than 1 node, run program mmap_truncate, which races mmap writes and truncates from multiple processes. While the test is running, a stat from another node forces writeout, causing an oops in ocfs2_get_block() because it sees a buffer to write which isn't allocated. This patch fixed the bug by clear dirty and uptodate bits in buffer, leave the buffer unmapped and return. Fix is suggested by Mark Fasheh, and I code up the patch. Signed-off-by: Coly Li Signed-off-by: Mark Fasheh --- fs/ocfs2/aops.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index 17964c0505a9..1db080135c6d 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -174,10 +174,17 @@ static int ocfs2_get_block(struct inode *inode, sector_t iblock, * need to use BH_New is when we're extending i_size on a file * system which doesn't support holes, in which case BH_New * allows block_prepare_write() to zero. + * + * If we see this on a sparse file system, then a truncate has + * raced us and removed the cluster. In this case, we clear + * the buffers dirty and uptodate bits and let the buffer code + * ignore it as a hole. */ - mlog_bug_on_msg(create && p_blkno == 0 && ocfs2_sparse_alloc(osb), - "ino %lu, iblock %llu\n", inode->i_ino, - (unsigned long long)iblock); + if (create && p_blkno == 0 && ocfs2_sparse_alloc(osb)) { + clear_buffer_dirty(bh_result); + clear_buffer_uptodate(bh_result); + goto bail; + } /* Treat the unwritten extent as a hole for zeroing purposes. */ if (p_blkno && !(ext_flags & OCFS2_EXT_UNWRITTEN)) -- cgit v1.2.3 From 58b6e5538460be358fdf1286d9a2fbcfcc2cfaba Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 16 Jul 2008 16:21:47 -0700 Subject: Revert "x86/PCI: ACPI based PCI gap calculation" This reverts commit 809d9a8f93bd8504dcc34b16bbfdfd1a8c9bb1ed. This one isn't quite ready for prime time. It needs more testing and additional feedback from the ACPI guys. --- arch/x86/pci/acpi.c | 80 ----------------------------------------------------- 1 file changed, 80 deletions(-) diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index d1ffb5709174..d95de2f199cd 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -4,7 +4,6 @@ #include #include #include -#include #include "pci.h" struct pci_root_info { @@ -15,11 +14,6 @@ struct pci_root_info { int busnum; }; -struct gap_info { - unsigned long gapstart; - unsigned long gapsize; -}; - static acpi_status resource_to_addr(struct acpi_resource *resource, struct acpi_resource_address64 *addr) @@ -116,78 +110,6 @@ adjust_transparent_bridge_resources(struct pci_bus *bus) } } -static acpi_status search_gap(struct acpi_resource *resource, void *data) -{ - struct acpi_resource_address64 addr; - acpi_status status; - struct gap_info *gap = data; - unsigned long long start_addr, end_addr; - - status = resource_to_addr(resource, &addr); - if (ACPI_SUCCESS(status) && - addr.resource_type == ACPI_MEMORY_RANGE && - addr.address_length > gap->gapsize) { - start_addr = addr.minimum + addr.translation_offset; - /* - * We want space only in the 32bit address range - */ - if (start_addr < UINT_MAX) { - end_addr = start_addr + addr.address_length; - e820_search_gap(&gap->gapstart, &gap->gapsize, - start_addr, end_addr); - } - } - - return AE_OK; -} - -/* - * Search for a hole in the 32 bit address space for PCI to assign MMIO - * resources, for hotplug or unconfigured resources. - * We query the CRS object of the PCI root device to look for possible producer - * resources in the tree and consider these while calulating the start address - * for this hole. - */ -static void pci_setup_gap(acpi_handle *handle) -{ - struct gap_info gap; - acpi_status status; - - gap.gapstart = 0; - gap.gapsize = 0x400000; - - status = acpi_walk_resources(handle, METHOD_NAME__CRS, - search_gap, &gap); - - if (ACPI_SUCCESS(status)) { - unsigned long round; - - if (!gap.gapstart) { - printk(KERN_ERR "ACPI: Warning: Cannot find a gap " - "in the 32bit address range for PCI\n" - "ACPI: PCI devices may collide with " - "hotpluggable memory address range\n"); - } - /* - * Round the gapstart, uses the same logic as in - * e820_gap_setup - */ - round = 0x100000; - while ((gap.gapsize >> 4) > round) - round += round; - /* Fun with two's complement */ - pci_mem_start = (gap.gapstart + round) & -round; - - printk(KERN_INFO "ACPI: PCI resources should " - "start at %lx (gap: %lx:%lx)\n", - pci_mem_start, gap.gapstart, gap.gapsize); - } else { - printk(KERN_ERR "ACPI: Error while searching for gap in " - "the 32bit address range for PCI\n"); - } -} - - static void get_current_resources(struct acpi_device *device, int busnum, int domain, struct pci_bus *bus) @@ -293,8 +215,6 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do if (bus && (pci_probe & PCI_USE__CRS)) get_current_resources(device, busnum, domain, bus); - - pci_setup_gap(device->handle); return bus; } -- cgit v1.2.3 From 33af79d12e0fa25545d49e86afc67ea8ad5f2f40 Mon Sep 17 00:00:00 2001 From: Chandra Seetharaman Date: Wed, 16 Jul 2008 17:35:08 -0700 Subject: scsi_dh: Verify "dev" is a sdev before accessing it. Before accessing the device data structure in hardware handlers, make sure it is a indeed a sdev device. Yinghai Lu found the bug on Jul 16, 2008, and later tested/verified the following fix. Signed-off-by: Chandra Seetharaman Signed-off-by: Linus Torvalds --- drivers/scsi/device_handler/scsi_dh_emc.c | 7 ++++++- drivers/scsi/device_handler/scsi_dh_hp_sw.c | 7 ++++++- drivers/scsi/device_handler/scsi_dh_rdac.c | 7 ++++++- 3 files changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c index ed53f14007a2..f2467e936e55 100644 --- a/drivers/scsi/device_handler/scsi_dh_emc.c +++ b/drivers/scsi/device_handler/scsi_dh_emc.c @@ -416,12 +416,17 @@ static int clariion_bus_notify(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; - struct scsi_device *sdev = to_scsi_device(dev); + struct scsi_device *sdev; struct scsi_dh_data *scsi_dh_data; struct clariion_dh_data *h; int i, found = 0; unsigned long flags; + if (!scsi_is_sdev_device(dev)) + return 0; + + sdev = to_scsi_device(dev); + if (action == BUS_NOTIFY_ADD_DEVICE) { for (i = 0; clariion_dev_list[i].vendor; i++) { if (!strncmp(sdev->vendor, clariion_dev_list[i].vendor, diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c index 12ceab7b3662..ae6be87d6a83 100644 --- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c +++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c @@ -131,11 +131,16 @@ static int hp_sw_bus_notify(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; - struct scsi_device *sdev = to_scsi_device(dev); + struct scsi_device *sdev; struct scsi_dh_data *scsi_dh_data; int i, found = 0; unsigned long flags; + if (!scsi_is_sdev_device(dev)) + return 0; + + sdev = to_scsi_device(dev); + if (action == BUS_NOTIFY_ADD_DEVICE) { for (i = 0; hp_sw_dh_data_list[i].vendor; i++) { if (!strncmp(sdev->vendor, hp_sw_dh_data_list[i].vendor, diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index 6fff077a888d..fdf34b0ec6e1 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -608,12 +608,17 @@ static int rdac_bus_notify(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; - struct scsi_device *sdev = to_scsi_device(dev); + struct scsi_device *sdev; struct scsi_dh_data *scsi_dh_data; struct rdac_dh_data *h; int i, found = 0; unsigned long flags; + if (!scsi_is_sdev_device(dev)) + return 0; + + sdev = to_scsi_device(dev); + if (action == BUS_NOTIFY_ADD_DEVICE) { for (i = 0; rdac_dev_list[i].vendor; i++) { if (!strncmp(sdev->vendor, rdac_dev_list[i].vendor, -- cgit v1.2.3 From 98abed02007b19bbfd68b6d06a5485afc3eeb01b Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Wed, 19 Mar 2008 19:24:59 -0700 Subject: do_wait reorganization This breaks out the guts of do_wait into three subfunctions. The control flow is less nonobvious without so much goto. do_wait_thread and ptrace_do_wait contain the main work of the outer loop. wait_consider_task contains the main work of the inner loop. Signed-off-by: Roland McGrath --- kernel/exit.c | 215 ++++++++++++++++++++++++++++++++++++---------------------- 1 file changed, 135 insertions(+), 80 deletions(-) diff --git a/kernel/exit.c b/kernel/exit.c index ceb258782835..7453356a961f 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -1238,7 +1238,7 @@ static int wait_noreap_copyout(struct task_struct *p, pid_t pid, uid_t uid, * the lock and this task is uninteresting. If we return nonzero, we have * released the lock and the system call should return. */ -static int wait_task_zombie(struct task_struct *p, int noreap, +static int wait_task_zombie(struct task_struct *p, int options, struct siginfo __user *infop, int __user *stat_addr, struct rusage __user *ru) { @@ -1246,7 +1246,10 @@ static int wait_task_zombie(struct task_struct *p, int noreap, int retval, status, traced; pid_t pid = task_pid_vnr(p); - if (unlikely(noreap)) { + if (!likely(options & WEXITED)) + return 0; + + if (unlikely(options & WNOWAIT)) { uid_t uid = p->uid; int exit_code = p->exit_code; int why, status; @@ -1397,13 +1400,16 @@ static int wait_task_zombie(struct task_struct *p, int noreap, * released the lock and the system call should return. */ static int wait_task_stopped(struct task_struct *p, - int noreap, struct siginfo __user *infop, + int options, struct siginfo __user *infop, int __user *stat_addr, struct rusage __user *ru) { int retval, exit_code, why; uid_t uid = 0; /* unneeded, required by compiler */ pid_t pid; + if (!(p->ptrace & PT_PTRACED) && !(options & WUNTRACED)) + return 0; + exit_code = 0; spin_lock_irq(&p->sighand->siglock); @@ -1421,7 +1427,7 @@ static int wait_task_stopped(struct task_struct *p, if (!exit_code) goto unlock_sig; - if (!noreap) + if (!unlikely(options & WNOWAIT)) p->exit_code = 0; uid = p->uid; @@ -1442,7 +1448,7 @@ unlock_sig: why = (p->ptrace & PT_PTRACED) ? CLD_TRAPPED : CLD_STOPPED; read_unlock(&tasklist_lock); - if (unlikely(noreap)) + if (unlikely(options & WNOWAIT)) return wait_noreap_copyout(p, pid, uid, why, exit_code, infop, ru); @@ -1476,7 +1482,7 @@ unlock_sig: * the lock and this task is uninteresting. If we return nonzero, we have * released the lock and the system call should return. */ -static int wait_task_continued(struct task_struct *p, int noreap, +static int wait_task_continued(struct task_struct *p, int options, struct siginfo __user *infop, int __user *stat_addr, struct rusage __user *ru) { @@ -1484,6 +1490,9 @@ static int wait_task_continued(struct task_struct *p, int noreap, pid_t pid; uid_t uid; + if (!unlikely(options & WCONTINUED)) + return 0; + if (!(p->signal->flags & SIGNAL_STOP_CONTINUED)) return 0; @@ -1493,7 +1502,7 @@ static int wait_task_continued(struct task_struct *p, int noreap, spin_unlock_irq(&p->sighand->siglock); return 0; } - if (!noreap) + if (!unlikely(options & WNOWAIT)) p->signal->flags &= ~SIGNAL_STOP_CONTINUED; spin_unlock_irq(&p->sighand->siglock); @@ -1519,89 +1528,137 @@ static int wait_task_continued(struct task_struct *p, int noreap, return retval; } +/* + * Consider @p for a wait by @parent. + * + * -ECHILD should be in *@notask_error before the first call. + * Returns nonzero for a final return, when we have unlocked tasklist_lock. + * Returns zero if the search for a child should continue; + * then *@notask_error is 0 if @p is an eligible child, or still -ECHILD. + */ +static int wait_consider_task(struct task_struct *parent, + struct task_struct *p, int *notask_error, + enum pid_type type, struct pid *pid, int options, + struct siginfo __user *infop, + int __user *stat_addr, struct rusage __user *ru) +{ + int ret = eligible_child(type, pid, options, p); + if (ret <= 0) + return ret; + + if (p->exit_state == EXIT_DEAD) + return 0; + + /* + * We don't reap group leaders with subthreads. + */ + if (p->exit_state == EXIT_ZOMBIE && !delay_group_leader(p)) + return wait_task_zombie(p, options, infop, stat_addr, ru); + + /* + * It's stopped or running now, so it might + * later continue, exit, or stop again. + */ + *notask_error = 0; + + if (task_is_stopped_or_traced(p)) + return wait_task_stopped(p, options, infop, stat_addr, ru); + + return wait_task_continued(p, options, infop, stat_addr, ru); +} + +/* + * Do the work of do_wait() for one thread in the group, @tsk. + * + * -ECHILD should be in *@notask_error before the first call. + * Returns nonzero for a final return, when we have unlocked tasklist_lock. + * Returns zero if the search for a child should continue; then + * *@notask_error is 0 if there were any eligible children, or still -ECHILD. + */ +static int do_wait_thread(struct task_struct *tsk, int *notask_error, + enum pid_type type, struct pid *pid, int options, + struct siginfo __user *infop, int __user *stat_addr, + struct rusage __user *ru) +{ + struct task_struct *p; + + list_for_each_entry(p, &tsk->children, sibling) { + int ret = wait_consider_task(tsk, p, notask_error, + type, pid, options, + infop, stat_addr, ru); + if (ret) + return ret; + } + + return 0; +} + +static int ptrace_do_wait(struct task_struct *tsk, int *notask_error, + enum pid_type type, struct pid *pid, int options, + struct siginfo __user *infop, int __user *stat_addr, + struct rusage __user *ru) +{ + struct task_struct *p; + + /* + * If we never saw an eligile child, check for children stolen by + * ptrace. We don't leave -ECHILD in *@notask_error if there are any, + * because we will eventually be allowed to wait for them again. + */ + if (!*notask_error) + return 0; + + list_for_each_entry(p, &tsk->ptrace_children, ptrace_list) { + int ret = eligible_child(type, pid, options, p); + if (unlikely(ret < 0)) + return ret; + if (ret) { + *notask_error = 0; + return 0; + } + } + + return 0; +} + static long do_wait(enum pid_type type, struct pid *pid, int options, struct siginfo __user *infop, int __user *stat_addr, struct rusage __user *ru) { DECLARE_WAITQUEUE(wait, current); struct task_struct *tsk; - int flag, retval; + int retval; add_wait_queue(¤t->signal->wait_chldexit,&wait); repeat: - /* If there is nothing that can match our critier just get out */ + /* + * If there is nothing that can match our critiera just get out. + * We will clear @retval to zero if we see any child that might later + * match our criteria, even if we are not able to reap it yet. + */ retval = -ECHILD; if ((type < PIDTYPE_MAX) && (!pid || hlist_empty(&pid->tasks[type]))) goto end; - /* - * We will set this flag if we see any child that might later - * match our criteria, even if we are not able to reap it yet. - */ - flag = retval = 0; current->state = TASK_INTERRUPTIBLE; read_lock(&tasklist_lock); tsk = current; do { - struct task_struct *p; - - list_for_each_entry(p, &tsk->children, sibling) { - int ret = eligible_child(type, pid, options, p); - if (!ret) - continue; - - if (unlikely(ret < 0)) { - retval = ret; - } else if (task_is_stopped_or_traced(p)) { - /* - * It's stopped now, so it might later - * continue, exit, or stop again. - */ - flag = 1; - if (!(p->ptrace & PT_PTRACED) && - !(options & WUNTRACED)) - continue; - - retval = wait_task_stopped(p, - (options & WNOWAIT), infop, - stat_addr, ru); - } else if (p->exit_state == EXIT_ZOMBIE && - !delay_group_leader(p)) { - /* - * We don't reap group leaders with subthreads. - */ - if (!likely(options & WEXITED)) - continue; - retval = wait_task_zombie(p, - (options & WNOWAIT), infop, - stat_addr, ru); - } else if (p->exit_state != EXIT_DEAD) { - /* - * It's running now, so it might later - * exit, stop, or stop and then continue. - */ - flag = 1; - if (!unlikely(options & WCONTINUED)) - continue; - retval = wait_task_continued(p, - (options & WNOWAIT), infop, - stat_addr, ru); - } - if (retval != 0) /* tasklist_lock released */ - goto end; - } - if (!flag) { - list_for_each_entry(p, &tsk->ptrace_children, - ptrace_list) { - flag = eligible_child(type, pid, options, p); - if (!flag) - continue; - if (likely(flag > 0)) - break; - retval = flag; - goto end; - } + int tsk_result = do_wait_thread(tsk, &retval, + type, pid, options, + infop, stat_addr, ru); + if (!tsk_result) + tsk_result = ptrace_do_wait(tsk, &retval, + type, pid, options, + infop, stat_addr, ru); + if (tsk_result) { + /* + * tasklist_lock is unlocked and we have a final result. + */ + retval = tsk_result; + goto end; } + if (options & __WNOTHREAD) break; tsk = next_thread(tsk); @@ -1609,16 +1666,14 @@ repeat: } while (tsk != current); read_unlock(&tasklist_lock); - if (flag) { - if (options & WNOHANG) - goto end; + if (!retval && !(options & WNOHANG)) { retval = -ERESTARTSYS; - if (signal_pending(current)) - goto end; - schedule(); - goto repeat; + if (!signal_pending(current)) { + schedule(); + goto repeat; + } } - retval = -ECHILD; + end: current->state = TASK_RUNNING; remove_wait_queue(¤t->signal->wait_chldexit,&wait); -- cgit v1.2.3 From f470021adb9190819c03d6d8c5c860a17480aa6d Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Mon, 24 Mar 2008 18:36:23 -0700 Subject: ptrace children revamp ptrace no longer fiddles with the children/sibling links, and the old ptrace_children list is gone. Now ptrace, whether of one's own children or another's via PTRACE_ATTACH, just uses the new ptraced list instead. There should be no user-visible difference that matters. The only change is the order in which do_wait() sees multiple stopped children and stopped ptrace attachees. Since wait_task_stopped() was changed earlier so it no longer reorders the children list, we already know this won't cause any new problems. Signed-off-by: Roland McGrath --- include/linux/init_task.h | 4 +- include/linux/sched.h | 26 +++--- kernel/exit.c | 226 ++++++++++++++++++++++++---------------------- kernel/fork.c | 6 +- kernel/ptrace.c | 37 +++++--- 5 files changed, 160 insertions(+), 139 deletions(-) diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 9927a88674a3..93c45acf249a 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -140,8 +140,8 @@ extern struct group_info init_groups; .nr_cpus_allowed = NR_CPUS, \ }, \ .tasks = LIST_HEAD_INIT(tsk.tasks), \ - .ptrace_children= LIST_HEAD_INIT(tsk.ptrace_children), \ - .ptrace_list = LIST_HEAD_INIT(tsk.ptrace_list), \ + .ptraced = LIST_HEAD_INIT(tsk.ptraced), \ + .ptrace_entry = LIST_HEAD_INIT(tsk.ptrace_entry), \ .real_parent = &tsk, \ .parent = &tsk, \ .children = LIST_HEAD_INIT(tsk.children), \ diff --git a/include/linux/sched.h b/include/linux/sched.h index ba2f859c6e4f..1941d8b5cf11 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1062,12 +1062,6 @@ struct task_struct { #endif struct list_head tasks; - /* - * ptrace_list/ptrace_children forms the list of my children - * that were stolen by a ptracer. - */ - struct list_head ptrace_children; - struct list_head ptrace_list; struct mm_struct *mm, *active_mm; @@ -1089,18 +1083,25 @@ struct task_struct { /* * pointers to (original) parent process, youngest child, younger sibling, * older sibling, respectively. (p->father can be replaced with - * p->parent->pid) + * p->real_parent->pid) */ - struct task_struct *real_parent; /* real parent process (when being debugged) */ - struct task_struct *parent; /* parent process */ + struct task_struct *real_parent; /* real parent process */ + struct task_struct *parent; /* recipient of SIGCHLD, wait4() reports */ /* - * children/sibling forms the list of my children plus the - * tasks I'm ptracing. + * children/sibling forms the list of my natural children */ struct list_head children; /* list of my children */ struct list_head sibling; /* linkage in my parent's children list */ struct task_struct *group_leader; /* threadgroup leader */ + /* + * ptraced is the list of tasks this task is using ptrace on. + * This includes both natural children and PTRACE_ATTACH targets. + * p->ptrace_entry is p's link on the p->parent->ptraced list. + */ + struct list_head ptraced; + struct list_head ptrace_entry; + /* PID/PID hash table linkage. */ struct pid_link pids[PIDTYPE_MAX]; struct list_head thread_group; @@ -1876,9 +1877,6 @@ extern void wait_task_inactive(struct task_struct * p); #define wait_task_inactive(p) do { } while (0) #endif -#define remove_parent(p) list_del_init(&(p)->sibling) -#define add_parent(p) list_add_tail(&(p)->sibling,&(p)->parent->children) - #define next_task(p) list_entry(rcu_dereference((p)->tasks.next), struct task_struct, tasks) #define for_each_process(p) \ diff --git a/kernel/exit.c b/kernel/exit.c index 7453356a961f..1e909826a804 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -71,7 +71,7 @@ static void __unhash_process(struct task_struct *p) __get_cpu_var(process_counts)--; } list_del_rcu(&p->thread_group); - remove_parent(p); + list_del_init(&p->sibling); } /* @@ -152,6 +152,18 @@ static void delayed_put_task_struct(struct rcu_head *rhp) put_task_struct(container_of(rhp, struct task_struct, rcu)); } +/* + * Do final ptrace-related cleanup of a zombie being reaped. + * + * Called with write_lock(&tasklist_lock) held. + */ +static void ptrace_release_task(struct task_struct *p) +{ + BUG_ON(!list_empty(&p->ptraced)); + ptrace_unlink(p); + BUG_ON(!list_empty(&p->ptrace_entry)); +} + void release_task(struct task_struct * p) { struct task_struct *leader; @@ -160,8 +172,7 @@ repeat: atomic_dec(&p->user->processes); proc_flush_task(p); write_lock_irq(&tasklist_lock); - ptrace_unlink(p); - BUG_ON(!list_empty(&p->ptrace_list) || !list_empty(&p->ptrace_children)); + ptrace_release_task(p); __exit_signal(p); /* @@ -315,9 +326,8 @@ static void reparent_to_kthreadd(void) ptrace_unlink(current); /* Reparent to init */ - remove_parent(current); current->real_parent = current->parent = kthreadd_task; - add_parent(current); + list_move_tail(¤t->sibling, ¤t->real_parent->children); /* Set the exit signal to SIGCHLD so we signal init on exit */ current->exit_signal = SIGCHLD; @@ -692,37 +702,71 @@ static void exit_mm(struct task_struct * tsk) mmput(mm); } -static void -reparent_thread(struct task_struct *p, struct task_struct *father, int traced) +/* + * Detach all tasks we were using ptrace on. + * Any that need to be release_task'd are put on the @dead list. + * + * Called with write_lock(&tasklist_lock) held. + */ +static void ptrace_exit(struct task_struct *parent, struct list_head *dead) { - if (p->pdeath_signal) - /* We already hold the tasklist_lock here. */ - group_send_sig_info(p->pdeath_signal, SEND_SIG_NOINFO, p); + struct task_struct *p, *n; - /* Move the child from its dying parent to the new one. */ - if (unlikely(traced)) { - /* Preserve ptrace links if someone else is tracing this child. */ - list_del_init(&p->ptrace_list); - if (ptrace_reparented(p)) - list_add(&p->ptrace_list, &p->real_parent->ptrace_children); - } else { - /* If this child is being traced, then we're the one tracing it - * anyway, so let go of it. + list_for_each_entry_safe(p, n, &parent->ptraced, ptrace_entry) { + __ptrace_unlink(p); + + if (p->exit_state != EXIT_ZOMBIE) + continue; + + /* + * If it's a zombie, our attachedness prevented normal + * parent notification or self-reaping. Do notification + * now if it would have happened earlier. If it should + * reap itself, add it to the @dead list. We can't call + * release_task() here because we already hold tasklist_lock. + * + * If it's our own child, there is no notification to do. */ - p->ptrace = 0; - remove_parent(p); - p->parent = p->real_parent; - add_parent(p); + if (!task_detached(p) && thread_group_empty(p)) { + if (!same_thread_group(p->real_parent, parent)) + do_notify_parent(p, p->exit_signal); + } - if (task_is_traced(p)) { + if (task_detached(p)) { /* - * If it was at a trace stop, turn it into - * a normal stop since it's no longer being - * traced. + * Mark it as in the process of being reaped. */ - ptrace_untrace(p); + p->exit_state = EXIT_DEAD; + list_add(&p->ptrace_entry, dead); } } +} + +/* + * Finish up exit-time ptrace cleanup. + * + * Called without locks. + */ +static void ptrace_exit_finish(struct task_struct *parent, + struct list_head *dead) +{ + struct task_struct *p, *n; + + BUG_ON(!list_empty(&parent->ptraced)); + + list_for_each_entry_safe(p, n, dead, ptrace_entry) { + list_del_init(&p->ptrace_entry); + release_task(p); + } +} + +static void reparent_thread(struct task_struct *p, struct task_struct *father) +{ + if (p->pdeath_signal) + /* We already hold the tasklist_lock here. */ + group_send_sig_info(p->pdeath_signal, SEND_SIG_NOINFO, p); + + list_move_tail(&p->sibling, &p->real_parent->children); /* If this is a threaded reparent there is no need to * notify anyone anything has happened. @@ -737,7 +781,8 @@ reparent_thread(struct task_struct *p, struct task_struct *father, int traced) /* If we'd notified the old parent about this child's death, * also notify the new parent. */ - if (!traced && p->exit_state == EXIT_ZOMBIE && + if (!ptrace_reparented(p) && + p->exit_state == EXIT_ZOMBIE && !task_detached(p) && thread_group_empty(p)) do_notify_parent(p, p->exit_signal); @@ -754,12 +799,15 @@ reparent_thread(struct task_struct *p, struct task_struct *father, int traced) static void forget_original_parent(struct task_struct *father) { struct task_struct *p, *n, *reaper = father; - struct list_head ptrace_dead; - - INIT_LIST_HEAD(&ptrace_dead); + LIST_HEAD(ptrace_dead); write_lock_irq(&tasklist_lock); + /* + * First clean up ptrace if we were using it. + */ + ptrace_exit(father, &ptrace_dead); + do { reaper = next_thread(reaper); if (reaper == father) { @@ -768,58 +816,19 @@ static void forget_original_parent(struct task_struct *father) } } while (reaper->flags & PF_EXITING); - /* - * There are only two places where our children can be: - * - * - in our child list - * - in our ptraced child list - * - * Search them and reparent children. - */ list_for_each_entry_safe(p, n, &father->children, sibling) { - int ptrace; - - ptrace = p->ptrace; - - /* if father isn't the real parent, then ptrace must be enabled */ - BUG_ON(father != p->real_parent && !ptrace); - - if (father == p->real_parent) { - /* reparent with a reaper, real father it's us */ - p->real_parent = reaper; - reparent_thread(p, father, 0); - } else { - /* reparent ptraced task to its real parent */ - __ptrace_unlink (p); - if (p->exit_state == EXIT_ZOMBIE && !task_detached(p) && - thread_group_empty(p)) - do_notify_parent(p, p->exit_signal); - } - - /* - * if the ptraced child is a detached zombie we must collect - * it before we exit, or it will remain zombie forever since - * we prevented it from self-reap itself while it was being - * traced by us, to be able to see it in wait4. - */ - if (unlikely(ptrace && p->exit_state == EXIT_ZOMBIE && task_detached(p))) - list_add(&p->ptrace_list, &ptrace_dead); - } - - list_for_each_entry_safe(p, n, &father->ptrace_children, ptrace_list) { p->real_parent = reaper; - reparent_thread(p, father, 1); + if (p->parent == father) { + BUG_ON(p->ptrace); + p->parent = p->real_parent; + } + reparent_thread(p, father); } write_unlock_irq(&tasklist_lock); BUG_ON(!list_empty(&father->children)); - BUG_ON(!list_empty(&father->ptrace_children)); - - list_for_each_entry_safe(p, n, &ptrace_dead, ptrace_list) { - list_del_init(&p->ptrace_list); - release_task(p); - } + ptrace_exit_finish(father, &ptrace_dead); } /* @@ -1180,13 +1189,6 @@ static int eligible_child(enum pid_type type, struct pid *pid, int options, return 0; } - /* - * Do not consider detached threads that are - * not ptraced: - */ - if (task_detached(p) && !p->ptrace) - return 0; - /* Wait for all children (clone and not) if __WALL is set; * otherwise, wait for clone children *only* if __WCLONE is * set; otherwise, wait for non-clone children *only*. (Note: @@ -1399,7 +1401,7 @@ static int wait_task_zombie(struct task_struct *p, int options, * the lock and this task is uninteresting. If we return nonzero, we have * released the lock and the system call should return. */ -static int wait_task_stopped(struct task_struct *p, +static int wait_task_stopped(int ptrace, struct task_struct *p, int options, struct siginfo __user *infop, int __user *stat_addr, struct rusage __user *ru) { @@ -1407,7 +1409,7 @@ static int wait_task_stopped(struct task_struct *p, uid_t uid = 0; /* unneeded, required by compiler */ pid_t pid; - if (!(p->ptrace & PT_PTRACED) && !(options & WUNTRACED)) + if (!(options & WUNTRACED)) return 0; exit_code = 0; @@ -1416,7 +1418,7 @@ static int wait_task_stopped(struct task_struct *p, if (unlikely(!task_is_stopped_or_traced(p))) goto unlock_sig; - if (!(p->ptrace & PT_PTRACED) && p->signal->group_stop_count > 0) + if (!ptrace && p->signal->group_stop_count > 0) /* * A group stop is in progress and this is the group leader. * We won't report until all threads have stopped. @@ -1445,7 +1447,7 @@ unlock_sig: */ get_task_struct(p); pid = task_pid_vnr(p); - why = (p->ptrace & PT_PTRACED) ? CLD_TRAPPED : CLD_STOPPED; + why = ptrace ? CLD_TRAPPED : CLD_STOPPED; read_unlock(&tasklist_lock); if (unlikely(options & WNOWAIT)) @@ -1536,7 +1538,7 @@ static int wait_task_continued(struct task_struct *p, int options, * Returns zero if the search for a child should continue; * then *@notask_error is 0 if @p is an eligible child, or still -ECHILD. */ -static int wait_consider_task(struct task_struct *parent, +static int wait_consider_task(struct task_struct *parent, int ptrace, struct task_struct *p, int *notask_error, enum pid_type type, struct pid *pid, int options, struct siginfo __user *infop, @@ -1546,6 +1548,15 @@ static int wait_consider_task(struct task_struct *parent, if (ret <= 0) return ret; + if (likely(!ptrace) && unlikely(p->ptrace)) { + /* + * This child is hidden by ptrace. + * We aren't allowed to see it now, but eventually we will. + */ + *notask_error = 0; + return 0; + } + if (p->exit_state == EXIT_DEAD) return 0; @@ -1562,7 +1573,8 @@ static int wait_consider_task(struct task_struct *parent, *notask_error = 0; if (task_is_stopped_or_traced(p)) - return wait_task_stopped(p, options, infop, stat_addr, ru); + return wait_task_stopped(ptrace, p, options, + infop, stat_addr, ru); return wait_task_continued(p, options, infop, stat_addr, ru); } @@ -1583,11 +1595,16 @@ static int do_wait_thread(struct task_struct *tsk, int *notask_error, struct task_struct *p; list_for_each_entry(p, &tsk->children, sibling) { - int ret = wait_consider_task(tsk, p, notask_error, - type, pid, options, - infop, stat_addr, ru); - if (ret) - return ret; + /* + * Do not consider detached threads. + */ + if (!task_detached(p)) { + int ret = wait_consider_task(tsk, 0, p, notask_error, + type, pid, options, + infop, stat_addr, ru); + if (ret) + return ret; + } } return 0; @@ -1601,21 +1618,16 @@ static int ptrace_do_wait(struct task_struct *tsk, int *notask_error, struct task_struct *p; /* - * If we never saw an eligile child, check for children stolen by - * ptrace. We don't leave -ECHILD in *@notask_error if there are any, - * because we will eventually be allowed to wait for them again. + * Traditionally we see ptrace'd stopped tasks regardless of options. */ - if (!*notask_error) - return 0; + options |= WUNTRACED; - list_for_each_entry(p, &tsk->ptrace_children, ptrace_list) { - int ret = eligible_child(type, pid, options, p); - if (unlikely(ret < 0)) + list_for_each_entry(p, &tsk->ptraced, ptrace_entry) { + int ret = wait_consider_task(tsk, 1, p, notask_error, + type, pid, options, + infop, stat_addr, ru); + if (ret) return ret; - if (ret) { - *notask_error = 0; - return 0; - } } return 0; diff --git a/kernel/fork.c b/kernel/fork.c index 4bd2f516401f..adefc1131f27 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -1125,8 +1125,8 @@ static struct task_struct *copy_process(unsigned long clone_flags, */ p->group_leader = p; INIT_LIST_HEAD(&p->thread_group); - INIT_LIST_HEAD(&p->ptrace_children); - INIT_LIST_HEAD(&p->ptrace_list); + INIT_LIST_HEAD(&p->ptrace_entry); + INIT_LIST_HEAD(&p->ptraced); /* Now that the task is set up, run cgroup callbacks if * necessary. We need to run them before the task is visible @@ -1198,7 +1198,7 @@ static struct task_struct *copy_process(unsigned long clone_flags, } if (likely(p->pid)) { - add_parent(p); + list_add_tail(&p->sibling, &p->real_parent->children); if (unlikely(p->ptrace & PT_PTRACED)) __ptrace_link(p, current->parent); diff --git a/kernel/ptrace.c b/kernel/ptrace.c index e337390fce01..8392a9da6450 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -33,13 +33,9 @@ */ void __ptrace_link(struct task_struct *child, struct task_struct *new_parent) { - BUG_ON(!list_empty(&child->ptrace_list)); - if (child->parent == new_parent) - return; - list_add(&child->ptrace_list, &child->parent->ptrace_children); - remove_parent(child); + BUG_ON(!list_empty(&child->ptrace_entry)); + list_add(&child->ptrace_entry, &new_parent->ptraced); child->parent = new_parent; - add_parent(child); } /* @@ -73,12 +69,8 @@ void __ptrace_unlink(struct task_struct *child) BUG_ON(!child->ptrace); child->ptrace = 0; - if (ptrace_reparented(child)) { - list_del_init(&child->ptrace_list); - remove_parent(child); - child->parent = child->real_parent; - add_parent(child); - } + child->parent = child->real_parent; + list_del_init(&child->ptrace_entry); if (task_is_traced(child)) ptrace_untrace(child); @@ -492,15 +484,34 @@ int ptrace_traceme(void) /* * Are we already being traced? */ +repeat: task_lock(current); if (!(current->ptrace & PT_PTRACED)) { + /* + * See ptrace_attach() comments about the locking here. + */ + unsigned long flags; + if (!write_trylock_irqsave(&tasklist_lock, flags)) { + task_unlock(current); + do { + cpu_relax(); + } while (!write_can_lock(&tasklist_lock)); + goto repeat; + } + ret = security_ptrace(current->parent, current, PTRACE_MODE_ATTACH); + /* * Set the ptrace bit in the process ptrace flags. + * Then link us on our parent's ptraced list. */ - if (!ret) + if (!ret) { current->ptrace |= PT_PTRACED; + __ptrace_link(current, current->real_parent); + } + + write_unlock_irqrestore(&tasklist_lock, flags); } task_unlock(current); return ret; -- cgit v1.2.3 From 14dd0b81414a58caf0296dbeace016bb0a5d11ab Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Sun, 30 Mar 2008 18:41:25 -0700 Subject: do_wait: return security_task_wait() error code in place of -ECHILD This reverts the effect of commit f2cc3eb133baa2e9dc8efd40f417106b2ee520f3 "do_wait: fix security checks". That change reverted the effect of commit 73243284463a761e04d69d22c7516b2be7de096c. The rationale for the original commit still stands. The inconsistent treatment of children hidden by ptrace was an unintended omission in the original change and in no way invalidates its purpose. This makes do_wait return the error returned by security_task_wait() (usually -EACCES) in place of -ECHILD when there are some children the caller would be able to wait for if not for the permission failure. A permission error will give the user a clue to look for security policy problems, rather than for mysterious wait bugs. Signed-off-by: Roland McGrath --- kernel/exit.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) diff --git a/kernel/exit.c b/kernel/exit.c index 1e909826a804..a2af6cac823c 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -1199,14 +1199,10 @@ static int eligible_child(enum pid_type type, struct pid *pid, int options, return 0; err = security_task_wait(p); - if (likely(!err)) - return 1; + if (err) + return err; - if (type != PIDTYPE_PID) - return 0; - /* This child was explicitly requested, abort */ - read_unlock(&tasklist_lock); - return err; + return 1; } static int wait_noreap_copyout(struct task_struct *p, pid_t pid, uid_t uid, @@ -1536,7 +1532,8 @@ static int wait_task_continued(struct task_struct *p, int options, * -ECHILD should be in *@notask_error before the first call. * Returns nonzero for a final return, when we have unlocked tasklist_lock. * Returns zero if the search for a child should continue; - * then *@notask_error is 0 if @p is an eligible child, or still -ECHILD. + * then *@notask_error is 0 if @p is an eligible child, + * or another error from security_task_wait(), or still -ECHILD. */ static int wait_consider_task(struct task_struct *parent, int ptrace, struct task_struct *p, int *notask_error, @@ -1545,9 +1542,21 @@ static int wait_consider_task(struct task_struct *parent, int ptrace, int __user *stat_addr, struct rusage __user *ru) { int ret = eligible_child(type, pid, options, p); - if (ret <= 0) + if (!ret) return ret; + if (unlikely(ret < 0)) { + /* + * If we have not yet seen any eligible child, + * then let this error code replace -ECHILD. + * A permission error will give the user a clue + * to look for security policy problems, rather + * than for mysterious wait bugs. + */ + if (*notask_error) + *notask_error = ret; + } + if (likely(!ptrace) && unlikely(p->ptrace)) { /* * This child is hidden by ptrace. @@ -1585,7 +1594,8 @@ static int wait_consider_task(struct task_struct *parent, int ptrace, * -ECHILD should be in *@notask_error before the first call. * Returns nonzero for a final return, when we have unlocked tasklist_lock. * Returns zero if the search for a child should continue; then - * *@notask_error is 0 if there were any eligible children, or still -ECHILD. + * *@notask_error is 0 if there were any eligible children, + * or another error from security_task_wait(), or still -ECHILD. */ static int do_wait_thread(struct task_struct *tsk, int *notask_error, enum pid_type type, struct pid *pid, int options, -- cgit v1.2.3 From 666f164f4fbfa78bd00fb4b74788b42a39842c64 Mon Sep 17 00:00:00 2001 From: Roland McGrath Date: Tue, 8 Apr 2008 23:12:30 -0700 Subject: fix dangling zombie when new parent ignores children This fixes an arcane bug that we think was a regression introduced by commit b2b2cbc4b2a2f389442549399a993a8306420baf. When a parent ignores SIGCHLD (or uses SA_NOCLDWAIT), its children would self-reap but they don't if it's using ptrace on them. When the parent thread later exits and ceases to ptrace a child but leaves other live threads in the parent's thread group, any zombie children are left dangling. The fix makes them self-reap then, as they would have done earlier if ptrace had not been in use. Signed-off-by: Roland McGrath --- kernel/exit.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/kernel/exit.c b/kernel/exit.c index a2af6cac823c..93d2711b9381 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -702,6 +702,23 @@ static void exit_mm(struct task_struct * tsk) mmput(mm); } +/* + * Return nonzero if @parent's children should reap themselves. + * + * Called with write_lock_irq(&tasklist_lock) held. + */ +static int ignoring_children(struct task_struct *parent) +{ + int ret; + struct sighand_struct *psig = parent->sighand; + unsigned long flags; + spin_lock_irqsave(&psig->siglock, flags); + ret = (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN || + (psig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDWAIT)); + spin_unlock_irqrestore(&psig->siglock, flags); + return ret; +} + /* * Detach all tasks we were using ptrace on. * Any that need to be release_task'd are put on the @dead list. @@ -711,6 +728,7 @@ static void exit_mm(struct task_struct * tsk) static void ptrace_exit(struct task_struct *parent, struct list_head *dead) { struct task_struct *p, *n; + int ign = -1; list_for_each_entry_safe(p, n, &parent->ptraced, ptrace_entry) { __ptrace_unlink(p); @@ -726,10 +744,18 @@ static void ptrace_exit(struct task_struct *parent, struct list_head *dead) * release_task() here because we already hold tasklist_lock. * * If it's our own child, there is no notification to do. + * But if our normal children self-reap, then this child + * was prevented by ptrace and we must reap it now. */ if (!task_detached(p) && thread_group_empty(p)) { if (!same_thread_group(p->real_parent, parent)) do_notify_parent(p, p->exit_signal); + else { + if (ign < 0) + ign = ignoring_children(parent); + if (ign) + p->exit_signal = -1; + } } if (task_detached(p)) { -- cgit v1.2.3 From 8e9509c827a28e2f365c203c04224f9e9dd1b63a Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 17 Jul 2008 13:26:50 +0200 Subject: ftrace: fix merge buglet -tip testing found a bootup hang here: initcall anon_inode_init+0x0/0x130 returned 0 after 0 msecs calling acpi_event_init+0x0/0x57 the bootup should have continued with: initcall acpi_event_init+0x0/0x57 returned 0 after 45 msecs but it hung hard there instead. bisection led to this commit: | commit 5806b81ac1c0c52665b91723fd4146a4f86e386b | Merge: d14c8a6... 6712e29... | Author: Ingo Molnar | Date: Mon Jul 14 16:11:52 2008 +0200 | Merge branch 'auto-ftrace-next' into tracing/for-linus turns out that i made this mistake in the merge: ifdef CONFIG_FTRACE # Do not profile debug utilities CFLAGS_REMOVE_tsc_64.o = -pg CFLAGS_REMOVE_tsc_32.o = -pg those two files got unified meanwhile - so the dont-profile annotation got lost. The proper rule is: CFLAGS_REMOVE_tsc.o = -pg i guess this could have been caught sooner if the CFLAGS_REMOVE* kbuild rule aborted the build if it met a target that does not exist anymore? Signed-off-by: Ingo Molnar --- arch/x86/kernel/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5112c84f5421..da140611bb57 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -8,8 +8,7 @@ CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE) ifdef CONFIG_FTRACE # Do not profile debug utilities -CFLAGS_REMOVE_tsc_64.o = -pg -CFLAGS_REMOVE_tsc_32.o = -pg +CFLAGS_REMOVE_tsc.o = -pg CFLAGS_REMOVE_rtc.o = -pg endif -- cgit v1.2.3 From 12e0c95e0ca99f633c9d9f90773037eb178685ad Mon Sep 17 00:00:00 2001 From: Frank Munzert Date: Thu, 17 Jul 2008 17:16:40 +0200 Subject: [S390] zfcpdump: Make SCSI disk dump tool recognize storage holes The kernel part of zfcpdump establishes a new debugfs file zcore/memmap which exports information on memory layout (start address and length of each memory chunk) to its userspace counterpart. Signed-off-by: Frank Munzert Signed-off-by: Heiko Carstens Cc: Martin Schwidefsky --- drivers/s390/char/zcore.c | 101 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 94 insertions(+), 7 deletions(-) diff --git a/drivers/s390/char/zcore.c b/drivers/s390/char/zcore.c index 047dd92ae804..7fd84be11931 100644 --- a/drivers/s390/char/zcore.c +++ b/drivers/s390/char/zcore.c @@ -29,6 +29,7 @@ #define TO_USER 0 #define TO_KERNEL 1 +#define CHUNK_INFO_SIZE 34 /* 2 16-byte char, each followed by blank */ enum arch_id { ARCH_S390 = 0, @@ -51,6 +52,7 @@ static struct debug_info *zcore_dbf; static int hsa_available; static struct dentry *zcore_dir; static struct dentry *zcore_file; +static struct dentry *zcore_memmap_file; /* * Copy memory from HSA to kernel or user memory (not reentrant): @@ -476,6 +478,54 @@ static const struct file_operations zcore_fops = { .release = zcore_release, }; +static ssize_t zcore_memmap_read(struct file *filp, char __user *buf, + size_t count, loff_t *ppos) +{ + return simple_read_from_buffer(buf, count, ppos, filp->private_data, + MEMORY_CHUNKS * CHUNK_INFO_SIZE); +} + +static int zcore_memmap_open(struct inode *inode, struct file *filp) +{ + int i; + char *buf; + struct mem_chunk *chunk_array; + + chunk_array = kzalloc(MEMORY_CHUNKS * sizeof(struct mem_chunk), + GFP_KERNEL); + if (!chunk_array) + return -ENOMEM; + detect_memory_layout(chunk_array); + buf = kzalloc(MEMORY_CHUNKS * CHUNK_INFO_SIZE, GFP_KERNEL); + if (!buf) { + kfree(chunk_array); + return -ENOMEM; + } + for (i = 0; i < MEMORY_CHUNKS; i++) { + sprintf(buf + (i * CHUNK_INFO_SIZE), "%016llx %016llx ", + (unsigned long long) chunk_array[i].addr, + (unsigned long long) chunk_array[i].size); + if (chunk_array[i].size == 0) + break; + } + kfree(chunk_array); + filp->private_data = buf; + return 0; +} + +static int zcore_memmap_release(struct inode *inode, struct file *filp) +{ + kfree(filp->private_data); + return 0; +} + +static const struct file_operations zcore_memmap_fops = { + .owner = THIS_MODULE, + .read = zcore_memmap_read, + .open = zcore_memmap_open, + .release = zcore_memmap_release, +}; + static void __init set_s390_lc_mask(union save_area *map) { @@ -554,18 +604,44 @@ static int __init check_sdias(void) return 0; } -static void __init zcore_header_init(int arch, struct zcore_header *hdr) +static int __init get_mem_size(unsigned long *mem) +{ + int i; + struct mem_chunk *chunk_array; + + chunk_array = kzalloc(MEMORY_CHUNKS * sizeof(struct mem_chunk), + GFP_KERNEL); + if (!chunk_array) + return -ENOMEM; + detect_memory_layout(chunk_array); + for (i = 0; i < MEMORY_CHUNKS; i++) { + if (chunk_array[i].size == 0) + break; + *mem += chunk_array[i].size; + } + kfree(chunk_array); + return 0; +} + +static int __init zcore_header_init(int arch, struct zcore_header *hdr) { + int rc; + unsigned long memory = 0; + if (arch == ARCH_S390X) hdr->arch_id = DUMP_ARCH_S390X; else hdr->arch_id = DUMP_ARCH_S390; - hdr->mem_size = sys_info.mem_size; - hdr->rmem_size = sys_info.mem_size; + rc = get_mem_size(&memory); + if (rc) + return rc; + hdr->mem_size = memory; + hdr->rmem_size = memory; hdr->mem_end = sys_info.mem_size; - hdr->num_pages = sys_info.mem_size / PAGE_SIZE; + hdr->num_pages = memory / PAGE_SIZE; hdr->tod = get_clock(); get_cpu_id(&hdr->cpu_id); + return 0; } static int __init zcore_init(void) @@ -608,7 +684,9 @@ static int __init zcore_init(void) if (rc) goto fail; - zcore_header_init(arch, &zcore_header); + rc = zcore_header_init(arch, &zcore_header); + if (rc) + goto fail; zcore_dir = debugfs_create_dir("zcore" , NULL); if (!zcore_dir) { @@ -618,13 +696,22 @@ static int __init zcore_init(void) zcore_file = debugfs_create_file("mem", S_IRUSR, zcore_dir, NULL, &zcore_fops); if (!zcore_file) { - debugfs_remove(zcore_dir); rc = -ENOMEM; - goto fail; + goto fail_dir; + } + zcore_memmap_file = debugfs_create_file("memmap", S_IRUSR, zcore_dir, + NULL, &zcore_memmap_fops); + if (!zcore_memmap_file) { + rc = -ENOMEM; + goto fail_file; } hsa_available = 1; return 0; +fail_file: + debugfs_remove(zcore_file); +fail_dir: + debugfs_remove(zcore_dir); fail: diag308(DIAG308_REL_HSA, NULL); return rc; -- cgit v1.2.3 From 9d853caf44e6f969a9ad056a9937e8d97bc2c761 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Thu, 17 Jul 2008 17:16:41 +0200 Subject: [S390] dasd: fix unsolicited SIM handling. Add missing schedule_bh and check that there is 32 bit sense data. Signed-off-by: Stefan Haberland Signed-off-by: Heiko Carstens Cc: Martin Schwidefsky --- drivers/s390/block/dasd_eckd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index e0b77210d37a..3590fdb5b2fd 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -1418,8 +1418,10 @@ static void dasd_eckd_handle_unsolicited_interrupt(struct dasd_device *device, /* service information message SIM */ - if ((irb->ecw[6] & DASD_SIM_SENSE) == DASD_SIM_SENSE) { + if (irb->esw.esw0.erw.cons && (irb->ecw[27] & DASD_SENSE_BIT_0) && + ((irb->ecw[6] & DASD_SIM_SENSE) == DASD_SIM_SENSE)) { dasd_3990_erp_handle_sim(device, irb->ecw); + dasd_schedule_device_bh(device); return; } -- cgit v1.2.3 From 626f311737770f0fb5c09a6da2ea795a559aa42a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 17 Jul 2008 17:16:42 +0200 Subject: [S390] chsc headers userspace cleanup Kernel headers shouldn't expose functions to userspace. Cc: Cornelia Huck Signed-off-by: Adrian Bunk Signed-off-by: Heiko Carstens Cc: Martin Schwidefsky --- include/asm-s390/Kbuild | 2 +- include/asm-s390/chpid.h | 6 +++--- include/asm-s390/schid.h | 3 +++ 3 files changed, 7 insertions(+), 4 deletions(-) diff --git a/include/asm-s390/Kbuild b/include/asm-s390/Kbuild index 09f312501eb5..bb5e9edb9825 100644 --- a/include/asm-s390/Kbuild +++ b/include/asm-s390/Kbuild @@ -8,9 +8,9 @@ header-y += ucontext.h header-y += vtoc.h header-y += zcrypt.h header-y += kvm.h -header-y += schid.h header-y += chsc.h unifdef-y += cmb.h unifdef-y += debug.h unifdef-y += chpid.h +unifdef-y += schid.h diff --git a/include/asm-s390/chpid.h b/include/asm-s390/chpid.h index 606844d0a5c3..dfe3c7f3439a 100644 --- a/include/asm-s390/chpid.h +++ b/include/asm-s390/chpid.h @@ -20,6 +20,9 @@ struct chp_id { u8 id; } __attribute__((packed)); +#ifdef __KERNEL__ +#include + static inline void chp_id_init(struct chp_id *chpid) { memset(chpid, 0, sizeof(struct chp_id)); @@ -40,9 +43,6 @@ static inline void chp_id_next(struct chp_id *chpid) } } -#ifdef __KERNEL__ -#include - static inline int chp_id_is_valid(struct chp_id *chpid) { return (chpid->cssid <= __MAX_CSSID); diff --git a/include/asm-s390/schid.h b/include/asm-s390/schid.h index 5017ffa78e04..7bdc0fe15691 100644 --- a/include/asm-s390/schid.h +++ b/include/asm-s390/schid.h @@ -10,6 +10,7 @@ struct subchannel_id { __u32 sch_no : 16; } __attribute__ ((packed, aligned(4))); +#ifdef __KERNEL__ /* Helper function for sane state of pre-allocated subchannel_id. */ static inline void @@ -25,4 +26,6 @@ schid_equal(struct subchannel_id *schid1, struct subchannel_id *schid2) return !memcmp(schid1, schid2, sizeof(struct subchannel_id)); } +#endif /* __KERNEL__ */ + #endif /* ASM_SCHID_H */ -- cgit v1.2.3 From 7337194f708bac977511c7890d7038ded187041a Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Thu, 17 Jul 2008 17:16:43 +0200 Subject: [S390] dasd: Fix cleanup in dasd_{fba,diag}_check_characteristics(). Signed-off-by: Cornelia Huck Signed-off-by: Heiko Carstens Cc: Martin Schwidefsky --- drivers/s390/block/dasd_diag.c | 25 ++++++++++++++++++------- drivers/s390/block/dasd_fba.c | 7 ++++++- 2 files changed, 24 insertions(+), 8 deletions(-) diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index d91df38ee4f7..ab5c5b43bdcf 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -333,7 +333,8 @@ dasd_diag_check_device(struct dasd_device *device) if (IS_ERR(block)) { DEV_MESSAGE(KERN_WARNING, device, "%s", "could not allocate dasd block structure"); - kfree(device->private); + device->private = NULL; + kfree(private); return PTR_ERR(block); } device->block = block; @@ -348,7 +349,8 @@ dasd_diag_check_device(struct dasd_device *device) if (rc) { DEV_MESSAGE(KERN_WARNING, device, "failed to retrieve device " "information (rc=%d)", rc); - return -ENOTSUPP; + rc = -ENOTSUPP; + goto out; } /* Figure out position of label block */ @@ -362,7 +364,8 @@ dasd_diag_check_device(struct dasd_device *device) default: DEV_MESSAGE(KERN_WARNING, device, "unsupported device class " "(class=%d)", private->rdc_data.vdev_class); - return -ENOTSUPP; + rc = -ENOTSUPP; + goto out; } DBF_DEV_EVENT(DBF_INFO, device, @@ -379,7 +382,8 @@ dasd_diag_check_device(struct dasd_device *device) if (label == NULL) { DEV_MESSAGE(KERN_WARNING, device, "%s", "No memory to allocate initialization request"); - return -ENOMEM; + rc = -ENOMEM; + goto out; } rc = 0; end_block = 0; @@ -403,7 +407,7 @@ dasd_diag_check_device(struct dasd_device *device) DEV_MESSAGE(KERN_WARNING, device, "%s", "DIAG call failed"); rc = -EOPNOTSUPP; - goto out; + goto out_label; } mdsk_term_io(device); if (rc == 0) @@ -413,7 +417,7 @@ dasd_diag_check_device(struct dasd_device *device) DEV_MESSAGE(KERN_WARNING, device, "device access failed " "(rc=%d)", rc); rc = -EIO; - goto out; + goto out_label; } /* check for label block */ if (memcmp(label->label_id, DASD_DIAG_CMS1, @@ -439,8 +443,15 @@ dasd_diag_check_device(struct dasd_device *device) (unsigned long) (block->blocks << block->s2b_shift) >> 1); } -out: +out_label: free_page((long) label); +out: + if (rc) { + device->block = NULL; + dasd_free_block(block); + device->private = NULL; + kfree(private); + } return rc; } diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c index aee4656127f7..aa0c533423a5 100644 --- a/drivers/s390/block/dasd_fba.c +++ b/drivers/s390/block/dasd_fba.c @@ -139,7 +139,8 @@ dasd_fba_check_characteristics(struct dasd_device *device) if (IS_ERR(block)) { DEV_MESSAGE(KERN_WARNING, device, "%s", "could not allocate dasd block structure"); - kfree(device->private); + device->private = NULL; + kfree(private); return PTR_ERR(block); } device->block = block; @@ -152,6 +153,10 @@ dasd_fba_check_characteristics(struct dasd_device *device) DEV_MESSAGE(KERN_WARNING, device, "Read device characteristics returned error %d", rc); + device->block = NULL; + dasd_free_block(block); + device->private = NULL; + kfree(private); return rc; } -- cgit v1.2.3 From c5a37255493a3a8bf527534c8700dd73bd591fc7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 17 Jul 2008 17:16:44 +0200 Subject: [S390] Increase default warning stacksize. Compiling a kernel with allmodconfig or allyesconfig results in tons of gcc warnings, because the default maximum stacksize from which on gcc will emit a warning is just 256 bytes. Increase this to 2048, so these warnings don't distract from the real warnings that we need to watch at. Signed-off-by: Heiko Carstens Cc: Martin Schwidefsky --- arch/s390/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 5dc8f8028d52..eb530b4128ba 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -289,7 +289,7 @@ config WARN_STACK_SIZE int "Maximum frame size considered safe (128-2048)" range 128 2048 depends on WARN_STACK - default "256" + default "2048" help This allows you to specify the maximum frame size a function may have without the compiler complaining about it. -- cgit v1.2.3 From 8de2ce86cdde64d00fc4a4034008b35d8fc0dc83 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 17 Jul 2008 17:16:45 +0200 Subject: [S390] Fix stacktrace compile bug. Add missing module.h include to fix this: CC arch/s390/kernel/stacktrace.o arch/s390/kernel/stacktrace.c:84: warning: data definition has no type or storage class arch/s390/kernel/stacktrace.c:84: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/s390/kernel/stacktrace.c:84: warning: parameter names (without types) in function declaration arch/s390/kernel/stacktrace.c:97: warning: data definition has no type or storage class arch/s390/kernel/stacktrace.c:97: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/s390/kernel/stacktrace.c:97: warning: parameter names (without types) in function declaration Signed-off-by: Heiko Carstens Cc: Martin Schwidefsky --- arch/s390/kernel/stacktrace.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c index 57571f10270c..8841919ef7e6 100644 --- a/arch/s390/kernel/stacktrace.c +++ b/arch/s390/kernel/stacktrace.c @@ -10,6 +10,7 @@ #include #include #include +#include static unsigned long save_context_stack(struct stack_trace *trace, unsigned long sp, -- cgit v1.2.3 From b9993a38a9b491a9df48a5bc82d2e03ab44e352a Mon Sep 17 00:00:00 2001 From: Frank Munzert Date: Thu, 17 Jul 2008 17:16:46 +0200 Subject: [S390] vmur: Fix return code handling. Use -EOPNOTSUPP instead of -ENOTSUPP. Signed-off-by: Frank Munzert Signed-off-by: Heiko Carstens Cc: Martin Schwidefsky --- drivers/s390/char/vmur.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c index 0a9f1cccbe58..b0ac44b27127 100644 --- a/drivers/s390/char/vmur.c +++ b/drivers/s390/char/vmur.c @@ -345,7 +345,7 @@ static int get_urd_class(struct urdev *urd) cc = diag210(&ur_diag210); switch (cc) { case 0: - return -ENOTSUPP; + return -EOPNOTSUPP; case 2: return ur_diag210.vrdcvcla; /* virtual device class */ case 3: @@ -621,7 +621,7 @@ static int verify_device(struct urdev *urd) case DEV_CLASS_UR_I: return verify_uri_device(urd); default: - return -ENOTSUPP; + return -EOPNOTSUPP; } } @@ -654,7 +654,7 @@ static int get_file_reclen(struct urdev *urd) case DEV_CLASS_UR_I: return get_uri_file_reclen(urd); default: - return -ENOTSUPP; + return -EOPNOTSUPP; } } @@ -827,7 +827,7 @@ static int ur_probe(struct ccw_device *cdev) goto fail_remove_attr; } if ((urd->class != DEV_CLASS_UR_I) && (urd->class != DEV_CLASS_UR_O)) { - rc = -ENOTSUPP; + rc = -EOPNOTSUPP; goto fail_remove_attr; } spin_lock_irq(get_ccwdev_lock(cdev)); @@ -892,7 +892,7 @@ static int ur_set_online(struct ccw_device *cdev) } else if (urd->cdev->id.cu_type == PRINTER_DEVTYPE) { sprintf(node_id, "vmprt-%s", cdev->dev.bus_id); } else { - rc = -ENOTSUPP; + rc = -EOPNOTSUPP; goto fail_free_cdev; } -- cgit v1.2.3 From dae39843f478d181da5b5e1c2c703dfcaaf838c1 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Thu, 17 Jul 2008 17:16:47 +0200 Subject: [S390] cio: Export chsc_error_from_response(). Make chsc_error_from_response() available to chsc callers outside of chsc.c (namely qdio) to avoid duplicating error checking code. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky Signed-off-by: Heiko Carstens --- drivers/s390/cio/chsc.c | 9 ++++++++- drivers/s390/cio/chsc.h | 2 ++ 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index 65264a38057d..29826fdd47b8 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -27,7 +27,13 @@ static void *sei_page; -static int chsc_error_from_response(int response) +/** + * chsc_error_from_response() - convert a chsc response to an error + * @response: chsc response code + * + * Returns an appropriate Linux error code for @response. + */ +int chsc_error_from_response(int response) { switch (response) { case 0x0001: @@ -45,6 +51,7 @@ static int chsc_error_from_response(int response) return -EIO; } } +EXPORT_SYMBOL_GPL(chsc_error_from_response); struct chsc_ssd_area { struct chsc_header request; diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h index fb6c4d6c45b4..ba59bceace98 100644 --- a/drivers/s390/cio/chsc.h +++ b/drivers/s390/cio/chsc.h @@ -101,4 +101,6 @@ void chsc_chp_online(struct chp_id chpid); void chsc_chp_offline(struct chp_id chpid); int chsc_get_channel_measurement_chars(struct channel_path *chp); +int chsc_error_from_response(int response); + #endif -- cgit v1.2.3 From 779e6e1c724d30e0fd1baca78b852e41e3a23c1d Mon Sep 17 00:00:00 2001 From: Jan Glauber Date: Thu, 17 Jul 2008 17:16:48 +0200 Subject: [S390] qdio: new qdio driver. List of major changes: - split qdio driver into several files - seperation of thin interrupt code - improved handling for multiple thin interrupt devices - inbound and outbound processing now always runs in tasklet context - significant less tasklet schedules per interrupt needed - merged qebsm with non-qebsm handling - cleanup qdio interface and added kerneldoc - coding style Reviewed-by: Cornelia Huck Reviewed-by: Utz Bacher Reviewed-by: Ursula Braun Signed-off-by: Jan Glauber Signed-off-by: Martin Schwidefsky Signed-off-by: Heiko Carstens --- drivers/s390/cio/Makefile | 2 + drivers/s390/cio/qdio.c | 3929 ------------------------------------- drivers/s390/cio/qdio.h | 835 +++----- drivers/s390/cio/qdio_debug.c | 240 +++ drivers/s390/cio/qdio_debug.h | 91 + drivers/s390/cio/qdio_main.c | 1755 +++++++++++++++++ drivers/s390/cio/qdio_perf.c | 151 ++ drivers/s390/cio/qdio_perf.h | 54 + drivers/s390/cio/qdio_setup.c | 521 +++++ drivers/s390/cio/qdio_thinint.c | 380 ++++ drivers/s390/net/qeth_core.h | 12 +- drivers/s390/net/qeth_core_main.c | 87 +- drivers/s390/net/qeth_l2_main.c | 26 +- drivers/s390/net/qeth_l3_main.c | 25 +- drivers/s390/scsi/zfcp_dbf.c | 12 +- drivers/s390/scsi/zfcp_dbf.h | 2 - drivers/s390/scsi/zfcp_ext.h | 5 +- drivers/s390/scsi/zfcp_qdio.c | 42 +- include/asm-s390/qdio.h | 646 +++--- include/asm-s390/setup.h | 2 +- 20 files changed, 3874 insertions(+), 4943 deletions(-) delete mode 100644 drivers/s390/cio/qdio.c create mode 100644 drivers/s390/cio/qdio_debug.c create mode 100644 drivers/s390/cio/qdio_debug.h create mode 100644 drivers/s390/cio/qdio_main.c create mode 100644 drivers/s390/cio/qdio_perf.c create mode 100644 drivers/s390/cio/qdio_perf.h create mode 100644 drivers/s390/cio/qdio_setup.c create mode 100644 drivers/s390/cio/qdio_thinint.c diff --git a/drivers/s390/cio/Makefile b/drivers/s390/cio/Makefile index 91e9e3f3073a..bd79bd165396 100644 --- a/drivers/s390/cio/Makefile +++ b/drivers/s390/cio/Makefile @@ -9,4 +9,6 @@ ccw_device-objs += device_id.o device_pgid.o device_status.o obj-y += ccw_device.o cmf.o obj-$(CONFIG_CHSC_SCH) += chsc_sch.o obj-$(CONFIG_CCWGROUP) += ccwgroup.o + +qdio-objs := qdio_main.o qdio_thinint.o qdio_debug.o qdio_perf.o qdio_setup.o obj-$(CONFIG_QDIO) += qdio.o diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c deleted file mode 100644 index 2bf36e14b102..000000000000 --- a/drivers/s390/cio/qdio.c +++ /dev/null @@ -1,3929 +0,0 @@ -/* - * - * linux/drivers/s390/cio/qdio.c - * - * Linux for S/390 QDIO base support, Hipersocket base support - * version 2 - * - * Copyright 2000,2002 IBM Corporation - * Author(s): Utz Bacher - * 2.6 cio integration by Cornelia Huck - * - * Restriction: only 63 iqdio subchannels would have its own indicator, - * after that, subsequent subchannels share one indicator - * - * - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "cio.h" -#include "css.h" -#include "device.h" -#include "qdio.h" -#include "ioasm.h" -#include "chsc.h" - -/****************** MODULE PARAMETER VARIABLES ********************/ -MODULE_AUTHOR("Utz Bacher "); -MODULE_DESCRIPTION("QDIO base support version 2, " \ - "Copyright 2000 IBM Corporation"); -MODULE_LICENSE("GPL"); - -/******************** HERE WE GO ***********************************/ - -static const char version[] = "QDIO base support version 2"; - -static int qdio_performance_stats = 0; -static int proc_perf_file_registration; -static struct qdio_perf_stats perf_stats; - -static int hydra_thinints; -static int is_passthrough = 0; -static int omit_svs; - -static int indicator_used[INDICATORS_PER_CACHELINE]; -static __u32 * volatile indicators; -static __u32 volatile spare_indicator; -static atomic_t spare_indicator_usecount; -#define QDIO_MEMPOOL_SCSSC_ELEMENTS 2 -static mempool_t *qdio_mempool_scssc; -static struct kmem_cache *qdio_q_cache; - -static debug_info_t *qdio_dbf_setup; -static debug_info_t *qdio_dbf_sbal; -static debug_info_t *qdio_dbf_trace; -static debug_info_t *qdio_dbf_sense; -#ifdef CONFIG_QDIO_DEBUG -static debug_info_t *qdio_dbf_slsb_out; -static debug_info_t *qdio_dbf_slsb_in; -#endif /* CONFIG_QDIO_DEBUG */ - -/* iQDIO stuff: */ -static volatile struct qdio_q *tiq_list=NULL; /* volatile as it could change - during a while loop */ -static DEFINE_SPINLOCK(ttiq_list_lock); -static void *tiqdio_ind; -static void tiqdio_tl(unsigned long); -static DECLARE_TASKLET(tiqdio_tasklet,tiqdio_tl,0); - -/* not a macro, as one of the arguments is atomic_read */ -static inline int -qdio_min(int a,int b) -{ - if (a> 12); /* time>>12 is microseconds */ -} - -/* - * unfortunately, we can't just xchg the values; in do_QDIO we want to reserve - * the q in any case, so that we'll not be interrupted when we are in - * qdio_mark_tiq... shouldn't have a really bad impact, as reserving almost - * ever works (last famous words) - */ -static inline int -qdio_reserve_q(struct qdio_q *q) -{ - return atomic_add_return(1,&q->use_count) - 1; -} - -static inline void -qdio_release_q(struct qdio_q *q) -{ - atomic_dec(&q->use_count); -} - -/*check ccq */ -static int -qdio_check_ccq(struct qdio_q *q, unsigned int ccq) -{ - char dbf_text[15]; - - if (ccq == 0 || ccq == 32) - return 0; - if (ccq == 96 || ccq == 97) - return 1; - /*notify devices immediately*/ - sprintf(dbf_text,"%d", ccq); - QDIO_DBF_TEXT2(1,trace,dbf_text); - return -EIO; -} -/* EQBS: extract buffer states */ -static int -qdio_do_eqbs(struct qdio_q *q, unsigned char *state, - unsigned int *start, unsigned int *cnt) -{ - struct qdio_irq *irq; - unsigned int tmp_cnt, q_no, ccq; - int rc ; - char dbf_text[15]; - - ccq = 0; - tmp_cnt = *cnt; - irq = (struct qdio_irq*)q->irq_ptr; - q_no = q->q_no; - if(!q->is_input_q) - q_no += irq->no_input_qs; -again: - ccq = do_eqbs(irq->sch_token, state, q_no, start, cnt); - rc = qdio_check_ccq(q, ccq); - if ((ccq == 96) && (tmp_cnt != *cnt)) - rc = 0; - if (rc == 1) { - QDIO_DBF_TEXT5(1,trace,"eqAGAIN"); - goto again; - } - if (rc < 0) { - QDIO_DBF_TEXT2(1,trace,"eqberr"); - sprintf(dbf_text,"%2x,%2x,%d,%d",tmp_cnt, *cnt, ccq, q_no); - QDIO_DBF_TEXT2(1,trace,dbf_text); - q->handler(q->cdev,QDIO_STATUS_ACTIVATE_CHECK_CONDITION| - QDIO_STATUS_LOOK_FOR_ERROR, - 0, 0, 0, -1, -1, q->int_parm); - return 0; - } - return (tmp_cnt - *cnt); -} - -/* SQBS: set buffer states */ -static int -qdio_do_sqbs(struct qdio_q *q, unsigned char state, - unsigned int *start, unsigned int *cnt) -{ - struct qdio_irq *irq; - unsigned int tmp_cnt, q_no, ccq; - int rc; - char dbf_text[15]; - - ccq = 0; - tmp_cnt = *cnt; - irq = (struct qdio_irq*)q->irq_ptr; - q_no = q->q_no; - if(!q->is_input_q) - q_no += irq->no_input_qs; -again: - ccq = do_sqbs(irq->sch_token, state, q_no, start, cnt); - rc = qdio_check_ccq(q, ccq); - if (rc == 1) { - QDIO_DBF_TEXT5(1,trace,"sqAGAIN"); - goto again; - } - if (rc < 0) { - QDIO_DBF_TEXT3(1,trace,"sqberr"); - sprintf(dbf_text,"%2x,%2x",tmp_cnt,*cnt); - QDIO_DBF_TEXT3(1,trace,dbf_text); - sprintf(dbf_text,"%d,%d",ccq,q_no); - QDIO_DBF_TEXT3(1,trace,dbf_text); - q->handler(q->cdev,QDIO_STATUS_ACTIVATE_CHECK_CONDITION| - QDIO_STATUS_LOOK_FOR_ERROR, - 0, 0, 0, -1, -1, q->int_parm); - return 0; - } - return (tmp_cnt - *cnt); -} - -static inline int -qdio_set_slsb(struct qdio_q *q, unsigned int *bufno, - unsigned char state, unsigned int *count) -{ - volatile char *slsb; - struct qdio_irq *irq; - - irq = (struct qdio_irq*)q->irq_ptr; - if (!irq->is_qebsm) { - slsb = (char *)&q->slsb.acc.val[(*bufno)]; - xchg(slsb, state); - return 1; - } - return qdio_do_sqbs(q, state, bufno, count); -} - -#ifdef CONFIG_QDIO_DEBUG -static inline void -qdio_trace_slsb(struct qdio_q *q) -{ - if (q->queue_type==QDIO_TRACE_QTYPE) { - if (q->is_input_q) - QDIO_DBF_HEX2(0,slsb_in,&q->slsb, - QDIO_MAX_BUFFERS_PER_Q); - else - QDIO_DBF_HEX2(0,slsb_out,&q->slsb, - QDIO_MAX_BUFFERS_PER_Q); - } -} -#endif - -static inline int -set_slsb(struct qdio_q *q, unsigned int *bufno, - unsigned char state, unsigned int *count) -{ - int rc; -#ifdef CONFIG_QDIO_DEBUG - qdio_trace_slsb(q); -#endif - rc = qdio_set_slsb(q, bufno, state, count); -#ifdef CONFIG_QDIO_DEBUG - qdio_trace_slsb(q); -#endif - return rc; -} -static inline int -qdio_siga_sync(struct qdio_q *q, unsigned int gpr2, - unsigned int gpr3) -{ - int cc; - - QDIO_DBF_TEXT4(0,trace,"sigasync"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - qdio_perf_stat_inc(&perf_stats.siga_syncs); - - cc = do_siga_sync(q->schid, gpr2, gpr3); - if (cc) - QDIO_DBF_HEX3(0,trace,&cc,sizeof(int*)); - - return cc; -} - -static inline int -qdio_siga_sync_q(struct qdio_q *q) -{ - if (q->is_input_q) - return qdio_siga_sync(q, 0, q->mask); - return qdio_siga_sync(q, q->mask, 0); -} - -static int -__do_siga_output(struct qdio_q *q, unsigned int *busy_bit) -{ - struct qdio_irq *irq; - unsigned int fc = 0; - unsigned long schid; - - irq = (struct qdio_irq *) q->irq_ptr; - if (!irq->is_qebsm) - schid = *((u32 *)&q->schid); - else { - schid = irq->sch_token; - fc |= 0x80; - } - return do_siga_output(schid, q->mask, busy_bit, fc); -} - -/* - * returns QDIO_SIGA_ERROR_ACCESS_EXCEPTION as cc, when SIGA returns - * an access exception - */ -static int -qdio_siga_output(struct qdio_q *q) -{ - int cc; - __u32 busy_bit; - __u64 start_time=0; - - qdio_perf_stat_inc(&perf_stats.siga_outs); - - QDIO_DBF_TEXT4(0,trace,"sigaout"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - for (;;) { - cc = __do_siga_output(q, &busy_bit); -//QDIO_PRINT_ERR("cc=%x, busy=%x\n",cc,busy_bit); - if ((cc==2) && (busy_bit) && (q->is_iqdio_q)) { - if (!start_time) - start_time=NOW; - if ((NOW-start_time)>QDIO_BUSY_BIT_PATIENCE) - break; - } else - break; - } - - if ((cc==2) && (busy_bit)) - cc |= QDIO_SIGA_ERROR_B_BIT_SET; - - if (cc) - QDIO_DBF_HEX3(0,trace,&cc,sizeof(int*)); - - return cc; -} - -static int -qdio_siga_input(struct qdio_q *q) -{ - int cc; - - QDIO_DBF_TEXT4(0,trace,"sigain"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - qdio_perf_stat_inc(&perf_stats.siga_ins); - - cc = do_siga_input(q->schid, q->mask); - - if (cc) - QDIO_DBF_HEX3(0,trace,&cc,sizeof(int*)); - - return cc; -} - -/* locked by the locks in qdio_activate and qdio_cleanup */ -static __u32 * -qdio_get_indicator(void) -{ - int i; - - for (i = 0; i < INDICATORS_PER_CACHELINE; i++) - if (!indicator_used[i]) { - indicator_used[i]=1; - return indicators+i; - } - atomic_inc(&spare_indicator_usecount); - return (__u32 * volatile) &spare_indicator; -} - -/* locked by the locks in qdio_activate and qdio_cleanup */ -static void -qdio_put_indicator(__u32 *addr) -{ - int i; - - if ( (addr) && (addr!=&spare_indicator) ) { - i=addr-indicators; - indicator_used[i]=0; - } - if (addr == &spare_indicator) - atomic_dec(&spare_indicator_usecount); -} - -static inline void -tiqdio_clear_summary_bit(__u32 *location) -{ - QDIO_DBF_TEXT5(0,trace,"clrsummb"); - QDIO_DBF_HEX5(0,trace,&location,sizeof(void*)); - - xchg(location,0); -} - -static inline void -tiqdio_set_summary_bit(__u32 *location) -{ - QDIO_DBF_TEXT5(0,trace,"setsummb"); - QDIO_DBF_HEX5(0,trace,&location,sizeof(void*)); - - xchg(location,-1); -} - -static inline void -tiqdio_sched_tl(void) -{ - tasklet_hi_schedule(&tiqdio_tasklet); -} - -static void -qdio_mark_tiq(struct qdio_q *q) -{ - unsigned long flags; - - QDIO_DBF_TEXT4(0,trace,"mark iq"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - spin_lock_irqsave(&ttiq_list_lock,flags); - if (unlikely(atomic_read(&q->is_in_shutdown))) - goto out_unlock; - - if (!q->is_input_q) - goto out_unlock; - - if ((q->list_prev) || (q->list_next)) - goto out_unlock; - - if (!tiq_list) { - tiq_list=q; - q->list_prev=q; - q->list_next=q; - } else { - q->list_next=tiq_list; - q->list_prev=tiq_list->list_prev; - tiq_list->list_prev->list_next=q; - tiq_list->list_prev=q; - } - spin_unlock_irqrestore(&ttiq_list_lock,flags); - - tiqdio_set_summary_bit((__u32*)q->dev_st_chg_ind); - tiqdio_sched_tl(); - return; -out_unlock: - spin_unlock_irqrestore(&ttiq_list_lock,flags); - return; -} - -static inline void -qdio_mark_q(struct qdio_q *q) -{ - QDIO_DBF_TEXT4(0,trace,"mark q"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - if (unlikely(atomic_read(&q->is_in_shutdown))) - return; - - tasklet_schedule(&q->tasklet); -} - -static int -qdio_stop_polling(struct qdio_q *q) -{ -#ifdef QDIO_USE_PROCESSING_STATE - unsigned int tmp, gsf, count = 1; - unsigned char state = 0; - struct qdio_irq *irq = (struct qdio_irq *) q->irq_ptr; - - if (!atomic_xchg(&q->polling,0)) - return 1; - - QDIO_DBF_TEXT4(0,trace,"stoppoll"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - /* show the card that we are not polling anymore */ - if (!q->is_input_q) - return 1; - - tmp = gsf = GET_SAVED_FRONTIER(q); - tmp = ((tmp + QDIO_MAX_BUFFERS_PER_Q-1) & (QDIO_MAX_BUFFERS_PER_Q-1) ); - set_slsb(q, &tmp, SLSB_P_INPUT_NOT_INIT, &count); - - /* - * we don't issue this SYNC_MEMORY, as we trust Rick T and - * moreover will not use the PROCESSING state under VM, so - * q->polling was 0 anyway - */ - /*SYNC_MEMORY;*/ - if (irq->is_qebsm) { - count = 1; - qdio_do_eqbs(q, &state, &gsf, &count); - } else - state = q->slsb.acc.val[gsf]; - if (state != SLSB_P_INPUT_PRIMED) - return 1; - /* - * set our summary bit again, as otherwise there is a - * small window we can miss between resetting it and - * checking for PRIMED state - */ - if (q->is_thinint_q) - tiqdio_set_summary_bit((__u32*)q->dev_st_chg_ind); - return 0; - -#else /* QDIO_USE_PROCESSING_STATE */ - return 1; -#endif /* QDIO_USE_PROCESSING_STATE */ -} - -/* - * see the comment in do_QDIO and before qdio_reserve_q about the - * sophisticated locking outside of unmark_q, so that we don't need to - * disable the interrupts :-) -*/ -static void -qdio_unmark_q(struct qdio_q *q) -{ - unsigned long flags; - - QDIO_DBF_TEXT4(0,trace,"unmark q"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - if ((!q->list_prev)||(!q->list_next)) - return; - - if ((q->is_thinint_q)&&(q->is_input_q)) { - /* iQDIO */ - spin_lock_irqsave(&ttiq_list_lock,flags); - /* in case cleanup has done this already and simultanously - * qdio_unmark_q is called from the interrupt handler, we've - * got to check this in this specific case again */ - if ((!q->list_prev)||(!q->list_next)) - goto out; - if (q->list_next==q) { - /* q was the only interesting q */ - tiq_list=NULL; - q->list_next=NULL; - q->list_prev=NULL; - } else { - q->list_next->list_prev=q->list_prev; - q->list_prev->list_next=q->list_next; - tiq_list=q->list_next; - q->list_next=NULL; - q->list_prev=NULL; - } -out: - spin_unlock_irqrestore(&ttiq_list_lock,flags); - } -} - -static inline unsigned long -tiqdio_clear_global_summary(void) -{ - unsigned long time; - - QDIO_DBF_TEXT5(0,trace,"clrglobl"); - - time = do_clear_global_summary(); - - QDIO_DBF_HEX5(0,trace,&time,sizeof(unsigned long)); - - return time; -} - - -/************************* OUTBOUND ROUTINES *******************************/ -static int -qdio_qebsm_get_outbound_buffer_frontier(struct qdio_q *q) -{ - struct qdio_irq *irq; - unsigned char state; - unsigned int cnt, count, ftc; - - irq = (struct qdio_irq *) q->irq_ptr; - if ((!q->is_iqdio_q) && (!q->hydra_gives_outbound_pcis)) - SYNC_MEMORY; - - ftc = q->first_to_check; - count = qdio_min(atomic_read(&q->number_of_buffers_used), - (QDIO_MAX_BUFFERS_PER_Q-1)); - if (count == 0) - return q->first_to_check; - cnt = qdio_do_eqbs(q, &state, &ftc, &count); - if (cnt == 0) - return q->first_to_check; - switch (state) { - case SLSB_P_OUTPUT_ERROR: - QDIO_DBF_TEXT3(0,trace,"outperr"); - atomic_sub(cnt , &q->number_of_buffers_used); - if (q->qdio_error) - q->error_status_flags |= - QDIO_STATUS_MORE_THAN_ONE_QDIO_ERROR; - q->qdio_error = SLSB_P_OUTPUT_ERROR; - q->error_status_flags |= QDIO_STATUS_LOOK_FOR_ERROR; - q->first_to_check = ftc; - break; - case SLSB_P_OUTPUT_EMPTY: - QDIO_DBF_TEXT5(0,trace,"outpempt"); - atomic_sub(cnt, &q->number_of_buffers_used); - q->first_to_check = ftc; - break; - case SLSB_CU_OUTPUT_PRIMED: - /* all buffers primed */ - QDIO_DBF_TEXT5(0,trace,"outpprim"); - break; - default: - break; - } - QDIO_DBF_HEX4(0,trace,&q->first_to_check,sizeof(int)); - return q->first_to_check; -} - -static int -qdio_qebsm_get_inbound_buffer_frontier(struct qdio_q *q) -{ - struct qdio_irq *irq; - unsigned char state; - int tmp, ftc, count, cnt; - char dbf_text[15]; - - - irq = (struct qdio_irq *) q->irq_ptr; - ftc = q->first_to_check; - count = qdio_min(atomic_read(&q->number_of_buffers_used), - (QDIO_MAX_BUFFERS_PER_Q-1)); - if (count == 0) - return q->first_to_check; - cnt = qdio_do_eqbs(q, &state, &ftc, &count); - if (cnt == 0) - return q->first_to_check; - switch (state) { - case SLSB_P_INPUT_ERROR : -#ifdef CONFIG_QDIO_DEBUG - QDIO_DBF_TEXT3(1,trace,"inperr"); - sprintf(dbf_text,"%2x,%2x",ftc,count); - QDIO_DBF_TEXT3(1,trace,dbf_text); -#endif /* CONFIG_QDIO_DEBUG */ - if (q->qdio_error) - q->error_status_flags |= - QDIO_STATUS_MORE_THAN_ONE_QDIO_ERROR; - q->qdio_error = SLSB_P_INPUT_ERROR; - q->error_status_flags |= QDIO_STATUS_LOOK_FOR_ERROR; - atomic_sub(cnt, &q->number_of_buffers_used); - q->first_to_check = ftc; - break; - case SLSB_P_INPUT_PRIMED : - QDIO_DBF_TEXT3(0,trace,"inptprim"); - sprintf(dbf_text,"%2x,%2x",ftc,count); - QDIO_DBF_TEXT3(1,trace,dbf_text); - tmp = 0; - ftc = q->first_to_check; -#ifdef QDIO_USE_PROCESSING_STATE - if (cnt > 1) { - cnt -= 1; - tmp = set_slsb(q, &ftc, SLSB_P_INPUT_NOT_INIT, &cnt); - if (!tmp) - break; - } - cnt = 1; - tmp += set_slsb(q, &ftc, - SLSB_P_INPUT_PROCESSING, &cnt); - atomic_set(&q->polling, 1); -#else - tmp = set_slsb(q, &ftc, SLSB_P_INPUT_NOT_INIT, &cnt); -#endif - atomic_sub(tmp, &q->number_of_buffers_used); - q->first_to_check = ftc; - break; - case SLSB_CU_INPUT_EMPTY: - case SLSB_P_INPUT_NOT_INIT: - case SLSB_P_INPUT_PROCESSING: - QDIO_DBF_TEXT5(0,trace,"inpnipro"); - break; - default: - break; - } - QDIO_DBF_HEX4(0,trace,&q->first_to_check,sizeof(int)); - return q->first_to_check; -} - -static int -qdio_get_outbound_buffer_frontier(struct qdio_q *q) -{ - struct qdio_irq *irq; - volatile char *slsb; - unsigned int count = 1; - int first_not_to_check, f, f_mod_no; - char dbf_text[15]; - - QDIO_DBF_TEXT4(0,trace,"getobfro"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - irq = (struct qdio_irq *) q->irq_ptr; - if (irq->is_qebsm) - return qdio_qebsm_get_outbound_buffer_frontier(q); - - slsb=&q->slsb.acc.val[0]; - f_mod_no=f=q->first_to_check; - /* - * f points to already processed elements, so f+no_used is correct... - * ... but: we don't check 128 buffers, as otherwise - * qdio_has_outbound_q_moved would return 0 - */ - first_not_to_check=f+qdio_min(atomic_read(&q->number_of_buffers_used), - (QDIO_MAX_BUFFERS_PER_Q-1)); - - if (((!q->is_iqdio_q) && (!q->hydra_gives_outbound_pcis)) || - (q->queue_type == QDIO_IQDIO_QFMT_ASYNCH)) - SYNC_MEMORY; - -check_next: - if (f==first_not_to_check) - goto out; - - switch(slsb[f_mod_no]) { - - /* the adapter has not fetched the output yet */ - case SLSB_CU_OUTPUT_PRIMED: - QDIO_DBF_TEXT5(0,trace,"outpprim"); - break; - - /* the adapter got it */ - case SLSB_P_OUTPUT_EMPTY: - atomic_dec(&q->number_of_buffers_used); - f++; - f_mod_no=f&(QDIO_MAX_BUFFERS_PER_Q-1); - QDIO_DBF_TEXT5(0,trace,"outpempt"); - goto check_next; - - case SLSB_P_OUTPUT_ERROR: - QDIO_DBF_TEXT3(0,trace,"outperr"); - sprintf(dbf_text,"%x-%x-%x",f_mod_no, - q->sbal[f_mod_no]->element[14].sbalf.value, - q->sbal[f_mod_no]->element[15].sbalf.value); - QDIO_DBF_TEXT3(1,trace,dbf_text); - QDIO_DBF_HEX2(1,sbal,q->sbal[f_mod_no],256); - - /* kind of process the buffer */ - set_slsb(q, &f_mod_no, SLSB_P_OUTPUT_NOT_INIT, &count); - - /* - * we increment the frontier, as this buffer - * was processed obviously - */ - atomic_dec(&q->number_of_buffers_used); - f_mod_no=(f_mod_no+1)&(QDIO_MAX_BUFFERS_PER_Q-1); - - if (q->qdio_error) - q->error_status_flags|= - QDIO_STATUS_MORE_THAN_ONE_QDIO_ERROR; - q->qdio_error=SLSB_P_OUTPUT_ERROR; - q->error_status_flags|=QDIO_STATUS_LOOK_FOR_ERROR; - - break; - - /* no new buffers */ - default: - QDIO_DBF_TEXT5(0,trace,"outpni"); - } -out: - return (q->first_to_check=f_mod_no); -} - -/* all buffers are processed */ -static int -qdio_is_outbound_q_done(struct qdio_q *q) -{ - int no_used; -#ifdef CONFIG_QDIO_DEBUG - char dbf_text[15]; -#endif - - no_used=atomic_read(&q->number_of_buffers_used); - -#ifdef CONFIG_QDIO_DEBUG - if (no_used) { - sprintf(dbf_text,"oqisnt%02x",no_used); - QDIO_DBF_TEXT4(0,trace,dbf_text); - } else { - QDIO_DBF_TEXT4(0,trace,"oqisdone"); - } - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); -#endif /* CONFIG_QDIO_DEBUG */ - return (no_used==0); -} - -static int -qdio_has_outbound_q_moved(struct qdio_q *q) -{ - int i; - - i=qdio_get_outbound_buffer_frontier(q); - - if ( (i!=GET_SAVED_FRONTIER(q)) || - (q->error_status_flags&QDIO_STATUS_LOOK_FOR_ERROR) ) { - SAVE_FRONTIER(q,i); - QDIO_DBF_TEXT4(0,trace,"oqhasmvd"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - return 1; - } else { - QDIO_DBF_TEXT4(0,trace,"oqhsntmv"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - return 0; - } -} - -static void -qdio_kick_outbound_q(struct qdio_q *q) -{ - int result; -#ifdef CONFIG_QDIO_DEBUG - char dbf_text[15]; - - QDIO_DBF_TEXT4(0,trace,"kickoutq"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); -#endif /* CONFIG_QDIO_DEBUG */ - - if (!q->siga_out) - return; - - /* here's the story with cc=2 and busy bit set (thanks, Rick): - * VM's CP could present us cc=2 and busy bit set on SIGA-write - * during reconfiguration of their Guest LAN (only in HIPERS mode, - * QDIO mode is asynchronous -- cc=2 and busy bit there will take - * the queues down immediately; and not being under VM we have a - * problem on cc=2 and busy bit set right away). - * - * Therefore qdio_siga_output will try for a short time constantly, - * if such a condition occurs. If it doesn't change, it will - * increase the busy_siga_counter and save the timestamp, and - * schedule the queue for later processing (via mark_q, using the - * queue tasklet). __qdio_outbound_processing will check out the - * counter. If non-zero, it will call qdio_kick_outbound_q as often - * as the value of the counter. This will attempt further SIGA - * instructions. For each successful SIGA, the counter is - * decreased, for failing SIGAs the counter remains the same, after - * all. - * After some time of no movement, qdio_kick_outbound_q will - * finally fail and reflect corresponding error codes to call - * the upper layer module and have it take the queues down. - * - * Note that this is a change from the original HiperSockets design - * (saying cc=2 and busy bit means take the queues down), but in - * these days Guest LAN didn't exist... excessive cc=2 with busy bit - * conditions will still take the queues down, but the threshold is - * higher due to the Guest LAN environment. - */ - - - result=qdio_siga_output(q); - - switch (result) { - case 0: - /* went smooth this time, reset timestamp */ -#ifdef CONFIG_QDIO_DEBUG - QDIO_DBF_TEXT3(0,trace,"cc2reslv"); - sprintf(dbf_text,"%4x%2x%2x",q->schid.sch_no,q->q_no, - atomic_read(&q->busy_siga_counter)); - QDIO_DBF_TEXT3(0,trace,dbf_text); -#endif /* CONFIG_QDIO_DEBUG */ - q->timing.busy_start=0; - break; - case (2|QDIO_SIGA_ERROR_B_BIT_SET): - /* cc=2 and busy bit: */ - atomic_inc(&q->busy_siga_counter); - - /* if the last siga was successful, save - * timestamp here */ - if (!q->timing.busy_start) - q->timing.busy_start=NOW; - - /* if we're in time, don't touch error_status_flags - * and siga_error */ - if (NOW-q->timing.busy_startschid.sch_no,q->q_no, - atomic_read(&q->busy_siga_counter)); - QDIO_DBF_TEXT3(0,trace,dbf_text); -#endif /* CONFIG_QDIO_DEBUG */ - /* else fallthrough and report error */ - default: - /* for plain cc=1, 2 or 3: */ - if (q->siga_error) - q->error_status_flags|= - QDIO_STATUS_MORE_THAN_ONE_SIGA_ERROR; - q->error_status_flags|= - QDIO_STATUS_LOOK_FOR_ERROR; - q->siga_error=result; - } -} - -static void -qdio_kick_outbound_handler(struct qdio_q *q) -{ - int start, end, real_end, count; -#ifdef CONFIG_QDIO_DEBUG - char dbf_text[15]; -#endif - - start = q->first_element_to_kick; - /* last_move_ftc was just updated */ - real_end = GET_SAVED_FRONTIER(q); - end = (real_end+QDIO_MAX_BUFFERS_PER_Q-1)& - (QDIO_MAX_BUFFERS_PER_Q-1); - count = (end+QDIO_MAX_BUFFERS_PER_Q+1-start)& - (QDIO_MAX_BUFFERS_PER_Q-1); - -#ifdef CONFIG_QDIO_DEBUG - QDIO_DBF_TEXT4(0,trace,"kickouth"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - sprintf(dbf_text,"s=%2xc=%2x",start,count); - QDIO_DBF_TEXT4(0,trace,dbf_text); -#endif /* CONFIG_QDIO_DEBUG */ - - if (q->state==QDIO_IRQ_STATE_ACTIVE) - q->handler(q->cdev,QDIO_STATUS_OUTBOUND_INT| - q->error_status_flags, - q->qdio_error,q->siga_error,q->q_no,start,count, - q->int_parm); - - /* for the next time: */ - q->first_element_to_kick=real_end; - q->qdio_error=0; - q->siga_error=0; - q->error_status_flags=0; -} - -static void -__qdio_outbound_processing(struct qdio_q *q) -{ - int siga_attempts; - - QDIO_DBF_TEXT4(0,trace,"qoutproc"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - if (unlikely(qdio_reserve_q(q))) { - qdio_release_q(q); - qdio_perf_stat_inc(&perf_stats.outbound_tl_runs_resched); - /* as we're sissies, we'll check next time */ - if (likely(!atomic_read(&q->is_in_shutdown))) { - qdio_mark_q(q); - QDIO_DBF_TEXT4(0,trace,"busy,agn"); - } - return; - } - qdio_perf_stat_inc(&perf_stats.outbound_tl_runs); - qdio_perf_stat_inc(&perf_stats.tl_runs); - - /* see comment in qdio_kick_outbound_q */ - siga_attempts=atomic_read(&q->busy_siga_counter); - while (siga_attempts) { - atomic_dec(&q->busy_siga_counter); - qdio_kick_outbound_q(q); - siga_attempts--; - } - - if (qdio_has_outbound_q_moved(q)) - qdio_kick_outbound_handler(q); - - if (q->queue_type == QDIO_ZFCP_QFMT) { - if ((!q->hydra_gives_outbound_pcis) && - (!qdio_is_outbound_q_done(q))) - qdio_mark_q(q); - } - else if (((!q->is_iqdio_q) && (!q->is_pci_out)) || - (q->queue_type == QDIO_IQDIO_QFMT_ASYNCH)) { - /* - * make sure buffer switch from PRIMED to EMPTY is noticed - * and outbound_handler is called - */ - if (qdio_is_outbound_q_done(q)) { - del_timer(&q->timer); - } else { - if (!timer_pending(&q->timer)) - mod_timer(&q->timer, jiffies + - QDIO_FORCE_CHECK_TIMEOUT); - } - } - - qdio_release_q(q); -} - -static void -qdio_outbound_processing(unsigned long q) -{ - __qdio_outbound_processing((struct qdio_q *) q); -} - -/************************* INBOUND ROUTINES *******************************/ - - -static int -qdio_get_inbound_buffer_frontier(struct qdio_q *q) -{ - struct qdio_irq *irq; - int f,f_mod_no; - volatile char *slsb; - unsigned int count = 1; - int first_not_to_check; -#ifdef CONFIG_QDIO_DEBUG - char dbf_text[15]; -#endif /* CONFIG_QDIO_DEBUG */ -#ifdef QDIO_USE_PROCESSING_STATE - int last_position=-1; -#endif /* QDIO_USE_PROCESSING_STATE */ - - QDIO_DBF_TEXT4(0,trace,"getibfro"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - irq = (struct qdio_irq *) q->irq_ptr; - if (irq->is_qebsm) - return qdio_qebsm_get_inbound_buffer_frontier(q); - - slsb=&q->slsb.acc.val[0]; - f_mod_no=f=q->first_to_check; - /* - * we don't check 128 buffers, as otherwise qdio_has_inbound_q_moved - * would return 0 - */ - first_not_to_check=f+qdio_min(atomic_read(&q->number_of_buffers_used), - (QDIO_MAX_BUFFERS_PER_Q-1)); - - /* - * we don't use this one, as a PCI or we after a thin interrupt - * will sync the queues - */ - /* SYNC_MEMORY;*/ - -check_next: - f_mod_no=f&(QDIO_MAX_BUFFERS_PER_Q-1); - if (f==first_not_to_check) - goto out; - switch (slsb[f_mod_no]) { - - /* CU_EMPTY means frontier is reached */ - case SLSB_CU_INPUT_EMPTY: - QDIO_DBF_TEXT5(0,trace,"inptempt"); - break; - - /* P_PRIMED means set slsb to P_PROCESSING and move on */ - case SLSB_P_INPUT_PRIMED: - QDIO_DBF_TEXT5(0,trace,"inptprim"); - -#ifdef QDIO_USE_PROCESSING_STATE - /* - * as soon as running under VM, polling the input queues will - * kill VM in terms of CP overhead - */ - if (q->siga_sync) { - set_slsb(q, &f_mod_no, SLSB_P_INPUT_NOT_INIT, &count); - } else { - /* set the previous buffer to NOT_INIT. The current - * buffer will be set to PROCESSING at the end of - * this function to avoid further interrupts. */ - if (last_position>=0) - set_slsb(q, &last_position, - SLSB_P_INPUT_NOT_INIT, &count); - atomic_set(&q->polling,1); - last_position=f_mod_no; - } -#else /* QDIO_USE_PROCESSING_STATE */ - set_slsb(q, &f_mod_no, SLSB_P_INPUT_NOT_INIT, &count); -#endif /* QDIO_USE_PROCESSING_STATE */ - /* - * not needed, as the inbound queue will be synced on the next - * siga-r, resp. tiqdio_is_inbound_q_done will do the siga-s - */ - /*SYNC_MEMORY;*/ - f++; - atomic_dec(&q->number_of_buffers_used); - goto check_next; - - case SLSB_P_INPUT_NOT_INIT: - case SLSB_P_INPUT_PROCESSING: - QDIO_DBF_TEXT5(0,trace,"inpnipro"); - break; - - /* P_ERROR means frontier is reached, break and report error */ - case SLSB_P_INPUT_ERROR: -#ifdef CONFIG_QDIO_DEBUG - sprintf(dbf_text,"inperr%2x",f_mod_no); - QDIO_DBF_TEXT3(1,trace,dbf_text); -#endif /* CONFIG_QDIO_DEBUG */ - QDIO_DBF_HEX2(1,sbal,q->sbal[f_mod_no],256); - - /* kind of process the buffer */ - set_slsb(q, &f_mod_no, SLSB_P_INPUT_NOT_INIT, &count); - - if (q->qdio_error) - q->error_status_flags|= - QDIO_STATUS_MORE_THAN_ONE_QDIO_ERROR; - q->qdio_error=SLSB_P_INPUT_ERROR; - q->error_status_flags|=QDIO_STATUS_LOOK_FOR_ERROR; - - /* we increment the frontier, as this buffer - * was processed obviously */ - f_mod_no=(f_mod_no+1)&(QDIO_MAX_BUFFERS_PER_Q-1); - atomic_dec(&q->number_of_buffers_used); - -#ifdef QDIO_USE_PROCESSING_STATE - last_position=-1; -#endif /* QDIO_USE_PROCESSING_STATE */ - - break; - - /* everything else means frontier not changed (HALTED or so) */ - default: - break; - } -out: - q->first_to_check=f_mod_no; - -#ifdef QDIO_USE_PROCESSING_STATE - if (last_position>=0) - set_slsb(q, &last_position, SLSB_P_INPUT_PROCESSING, &count); -#endif /* QDIO_USE_PROCESSING_STATE */ - - QDIO_DBF_HEX4(0,trace,&q->first_to_check,sizeof(int)); - - return q->first_to_check; -} - -static int -qdio_has_inbound_q_moved(struct qdio_q *q) -{ - int i; - - i=qdio_get_inbound_buffer_frontier(q); - if ( (i!=GET_SAVED_FRONTIER(q)) || - (q->error_status_flags&QDIO_STATUS_LOOK_FOR_ERROR) ) { - SAVE_FRONTIER(q,i); - if ((!q->siga_sync)&&(!q->hydra_gives_outbound_pcis)) - SAVE_TIMESTAMP(q); - - QDIO_DBF_TEXT4(0,trace,"inhasmvd"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - return 1; - } else { - QDIO_DBF_TEXT4(0,trace,"inhsntmv"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - return 0; - } -} - -/* means, no more buffers to be filled */ -static int -tiqdio_is_inbound_q_done(struct qdio_q *q) -{ - int no_used; - unsigned int start_buf, count; - unsigned char state = 0; - struct qdio_irq *irq = (struct qdio_irq *) q->irq_ptr; - -#ifdef CONFIG_QDIO_DEBUG - char dbf_text[15]; -#endif - - no_used=atomic_read(&q->number_of_buffers_used); - - /* propagate the change from 82 to 80 through VM */ - SYNC_MEMORY; - -#ifdef CONFIG_QDIO_DEBUG - if (no_used) { - sprintf(dbf_text,"iqisnt%02x",no_used); - QDIO_DBF_TEXT4(0,trace,dbf_text); - } else { - QDIO_DBF_TEXT4(0,trace,"iniqisdo"); - } - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); -#endif /* CONFIG_QDIO_DEBUG */ - - if (!no_used) - return 1; - if (irq->is_qebsm) { - count = 1; - start_buf = q->first_to_check; - qdio_do_eqbs(q, &state, &start_buf, &count); - } else - state = q->slsb.acc.val[q->first_to_check]; - if (state != SLSB_P_INPUT_PRIMED) - /* - * nothing more to do, if next buffer is not PRIMED. - * note that we did a SYNC_MEMORY before, that there - * has been a sychnronization. - * we will return 0 below, as there is nothing to do - * (stop_polling not necessary, as we have not been - * using the PROCESSING state - */ - return 0; - - /* - * ok, the next input buffer is primed. that means, that device state - * change indicator and adapter local summary are set, so we will find - * it next time. - * we will return 0 below, as there is nothing to do, except scheduling - * ourselves for the next time. - */ - tiqdio_set_summary_bit((__u32*)q->dev_st_chg_ind); - tiqdio_sched_tl(); - return 0; -} - -static int -qdio_is_inbound_q_done(struct qdio_q *q) -{ - int no_used; - unsigned int start_buf, count; - unsigned char state = 0; - struct qdio_irq *irq = (struct qdio_irq *) q->irq_ptr; - -#ifdef CONFIG_QDIO_DEBUG - char dbf_text[15]; -#endif - - no_used=atomic_read(&q->number_of_buffers_used); - - /* - * we need that one for synchronization with the adapter, as it - * does a kind of PCI avoidance - */ - SYNC_MEMORY; - - if (!no_used) { - QDIO_DBF_TEXT4(0,trace,"inqisdnA"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - return 1; - } - if (irq->is_qebsm) { - count = 1; - start_buf = q->first_to_check; - qdio_do_eqbs(q, &state, &start_buf, &count); - } else - state = q->slsb.acc.val[q->first_to_check]; - if (state == SLSB_P_INPUT_PRIMED) { - /* we got something to do */ - QDIO_DBF_TEXT4(0,trace,"inqisntA"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - return 0; - } - - /* on VM, we don't poll, so the q is always done here */ - if (q->siga_sync) - return 1; - if (q->hydra_gives_outbound_pcis) - return 1; - - /* - * at this point we know, that inbound first_to_check - * has (probably) not moved (see qdio_inbound_processing) - */ - if (NOW>GET_SAVED_TIMESTAMP(q)+q->timing.threshold) { -#ifdef CONFIG_QDIO_DEBUG - QDIO_DBF_TEXT4(0,trace,"inqisdon"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - sprintf(dbf_text,"pf%02xcn%02x",q->first_to_check,no_used); - QDIO_DBF_TEXT4(0,trace,dbf_text); -#endif /* CONFIG_QDIO_DEBUG */ - return 1; - } else { -#ifdef CONFIG_QDIO_DEBUG - QDIO_DBF_TEXT4(0,trace,"inqisntd"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - sprintf(dbf_text,"pf%02xcn%02x",q->first_to_check,no_used); - QDIO_DBF_TEXT4(0,trace,dbf_text); -#endif /* CONFIG_QDIO_DEBUG */ - return 0; - } -} - -static void -qdio_kick_inbound_handler(struct qdio_q *q) -{ - int count, start, end, real_end, i; -#ifdef CONFIG_QDIO_DEBUG - char dbf_text[15]; -#endif - - QDIO_DBF_TEXT4(0,trace,"kickinh"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - start=q->first_element_to_kick; - real_end=q->first_to_check; - end=(real_end+QDIO_MAX_BUFFERS_PER_Q-1)&(QDIO_MAX_BUFFERS_PER_Q-1); - - i=start; - count=0; - while (1) { - count++; - if (i==end) - break; - i=(i+1)&(QDIO_MAX_BUFFERS_PER_Q-1); - } - -#ifdef CONFIG_QDIO_DEBUG - sprintf(dbf_text,"s=%2xc=%2x",start,count); - QDIO_DBF_TEXT4(0,trace,dbf_text); -#endif /* CONFIG_QDIO_DEBUG */ - - if (likely(q->state==QDIO_IRQ_STATE_ACTIVE)) - q->handler(q->cdev, - QDIO_STATUS_INBOUND_INT|q->error_status_flags, - q->qdio_error,q->siga_error,q->q_no,start,count, - q->int_parm); - - /* for the next time: */ - q->first_element_to_kick=real_end; - q->qdio_error=0; - q->siga_error=0; - q->error_status_flags=0; - - qdio_perf_stat_inc(&perf_stats.inbound_cnt); -} - -static void -__tiqdio_inbound_processing(struct qdio_q *q, int spare_ind_was_set) -{ - struct qdio_irq *irq_ptr; - struct qdio_q *oq; - int i; - - QDIO_DBF_TEXT4(0,trace,"iqinproc"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - /* - * we first want to reserve the q, so that we know, that we don't - * interrupt ourselves and call qdio_unmark_q, as is_in_shutdown might - * be set - */ - if (unlikely(qdio_reserve_q(q))) { - qdio_release_q(q); - qdio_perf_stat_inc(&perf_stats.inbound_thin_tl_runs_resched); - /* - * as we might just be about to stop polling, we make - * sure that we check again at least once more - */ - tiqdio_sched_tl(); - return; - } - qdio_perf_stat_inc(&perf_stats.inbound_thin_tl_runs); - if (unlikely(atomic_read(&q->is_in_shutdown))) { - qdio_unmark_q(q); - goto out; - } - - /* - * we reset spare_ind_was_set, when the queue does not use the - * spare indicator - */ - if (spare_ind_was_set) - spare_ind_was_set = (q->dev_st_chg_ind == &spare_indicator); - - if (!(*(q->dev_st_chg_ind)) && !spare_ind_was_set) - goto out; - /* - * q->dev_st_chg_ind is the indicator, be it shared or not. - * only clear it, if indicator is non-shared - */ - if (q->dev_st_chg_ind != &spare_indicator) - tiqdio_clear_summary_bit((__u32*)q->dev_st_chg_ind); - - if (q->hydra_gives_outbound_pcis) { - if (!q->siga_sync_done_on_thinints) { - SYNC_MEMORY_ALL; - } else if (!q->siga_sync_done_on_outb_tis) { - SYNC_MEMORY_ALL_OUTB; - } - } else { - SYNC_MEMORY; - } - /* - * maybe we have to do work on our outbound queues... at least - * we have to check the outbound-int-capable thinint-capable - * queues - */ - if (q->hydra_gives_outbound_pcis) { - irq_ptr = (struct qdio_irq*)q->irq_ptr; - for (i=0;ino_output_qs;i++) { - oq = irq_ptr->output_qs[i]; - if (!qdio_is_outbound_q_done(oq)) { - qdio_perf_stat_dec(&perf_stats.tl_runs); - __qdio_outbound_processing(oq); - } - } - } - - if (!qdio_has_inbound_q_moved(q)) - goto out; - - qdio_kick_inbound_handler(q); - if (tiqdio_is_inbound_q_done(q)) - if (!qdio_stop_polling(q)) { - /* - * we set the flags to get into the stuff next time, - * see also comment in qdio_stop_polling - */ - tiqdio_set_summary_bit((__u32*)q->dev_st_chg_ind); - tiqdio_sched_tl(); - } -out: - qdio_release_q(q); -} - -static void -tiqdio_inbound_processing(unsigned long q) -{ - __tiqdio_inbound_processing((struct qdio_q *) q, - atomic_read(&spare_indicator_usecount)); -} - -static void -__qdio_inbound_processing(struct qdio_q *q) -{ - int q_laps=0; - - QDIO_DBF_TEXT4(0,trace,"qinproc"); - QDIO_DBF_HEX4(0,trace,&q,sizeof(void*)); - - if (unlikely(qdio_reserve_q(q))) { - qdio_release_q(q); - qdio_perf_stat_inc(&perf_stats.inbound_tl_runs_resched); - /* as we're sissies, we'll check next time */ - if (likely(!atomic_read(&q->is_in_shutdown))) { - qdio_mark_q(q); - QDIO_DBF_TEXT4(0,trace,"busy,agn"); - } - return; - } - qdio_perf_stat_inc(&perf_stats.inbound_tl_runs); - qdio_perf_stat_inc(&perf_stats.tl_runs); - -again: - if (qdio_has_inbound_q_moved(q)) { - qdio_kick_inbound_handler(q); - if (!qdio_stop_polling(q)) { - q_laps++; - if (q_lapssiga_sync) - return 2; - - if (unlikely(qdio_reserve_q(q))) { - qdio_release_q(q); - qdio_perf_stat_inc(&perf_stats.inbound_thin_tl_runs_resched); - /* - * as we might just be about to stop polling, we make - * sure that we check again at least once more - */ - - /* - * sanity -- we'd get here without setting the - * dev st chg ind - */ - tiqdio_set_summary_bit((__u32*)q->dev_st_chg_ind); - tiqdio_sched_tl(); - return 0; - } - if (qdio_stop_polling(q)) { - qdio_release_q(q); - return 2; - } - if (q_lapsdev_st_chg_ind); - tiqdio_sched_tl(); - qdio_release_q(q); - return 1; - -} -#endif /* QDIO_USE_PROCESSING_STATE */ - -static void -tiqdio_inbound_checks(void) -{ - struct qdio_q *q; - int spare_ind_was_set=0; -#ifdef QDIO_USE_PROCESSING_STATE - int q_laps=0; -#endif /* QDIO_USE_PROCESSING_STATE */ - - QDIO_DBF_TEXT4(0,trace,"iqdinbck"); - QDIO_DBF_TEXT5(0,trace,"iqlocsum"); - -#ifdef QDIO_USE_PROCESSING_STATE -again: -#endif /* QDIO_USE_PROCESSING_STATE */ - - /* when the spare indicator is used and set, save that and clear it */ - if ((atomic_read(&spare_indicator_usecount)) && spare_indicator) { - spare_ind_was_set = 1; - tiqdio_clear_summary_bit((__u32*)&spare_indicator); - } - - q=(struct qdio_q*)tiq_list; - do { - if (!q) - break; - __tiqdio_inbound_processing(q, spare_ind_was_set); - q=(struct qdio_q*)q->list_next; - } while (q!=(struct qdio_q*)tiq_list); - -#ifdef QDIO_USE_PROCESSING_STATE - q=(struct qdio_q*)tiq_list; - do { - int ret; - - ret = tiqdio_reset_processing_state(q, q_laps); - switch (ret) { - case 0: - return; - case 1: - q_laps++; - case 2: - q = (struct qdio_q*)q->list_next; - break; - default: - q_laps++; - goto again; - } - } while (q!=(struct qdio_q*)tiq_list); -#endif /* QDIO_USE_PROCESSING_STATE */ -} - -static void -tiqdio_tl(unsigned long data) -{ - QDIO_DBF_TEXT4(0,trace,"iqdio_tl"); - - qdio_perf_stat_inc(&perf_stats.tl_runs); - - tiqdio_inbound_checks(); -} - -/********************* GENERAL HELPER_ROUTINES ***********************/ - -static void -qdio_release_irq_memory(struct qdio_irq *irq_ptr) -{ - int i; - struct qdio_q *q; - - for (i = 0; i < QDIO_MAX_QUEUES_PER_IRQ; i++) { - q = irq_ptr->input_qs[i]; - if (q) { - free_page((unsigned long) q->slib); - kmem_cache_free(qdio_q_cache, q); - } - q = irq_ptr->output_qs[i]; - if (q) { - free_page((unsigned long) q->slib); - kmem_cache_free(qdio_q_cache, q); - } - } - free_page((unsigned long) irq_ptr->qdr); - free_page((unsigned long) irq_ptr); -} - -static void -qdio_set_impl_params(struct qdio_irq *irq_ptr, - unsigned int qib_param_field_format, - /* pointer to 128 bytes or NULL, if no param field */ - unsigned char *qib_param_field, - /* pointer to no_queues*128 words of data or NULL */ - unsigned int no_input_qs, - unsigned int no_output_qs, - unsigned long *input_slib_elements, - unsigned long *output_slib_elements) -{ - int i,j; - - if (!irq_ptr) - return; - - irq_ptr->qib.pfmt=qib_param_field_format; - if (qib_param_field) - memcpy(irq_ptr->qib.parm,qib_param_field, - QDIO_MAX_BUFFERS_PER_Q); - - if (input_slib_elements) - for (i=0;iinput_qs[i]->slib->slibe[j].parms= - input_slib_elements[ - i*QDIO_MAX_BUFFERS_PER_Q+j]; - } - if (output_slib_elements) - for (i=0;ioutput_qs[i]->slib->slibe[j].parms= - output_slib_elements[ - i*QDIO_MAX_BUFFERS_PER_Q+j]; - } -} - -static int -qdio_alloc_qs(struct qdio_irq *irq_ptr, - int no_input_qs, int no_output_qs) -{ - int i; - struct qdio_q *q; - - for (i = 0; i < no_input_qs; i++) { - q = kmem_cache_alloc(qdio_q_cache, GFP_KERNEL); - if (!q) - return -ENOMEM; - memset(q, 0, sizeof(*q)); - - q->slib = (struct slib *) __get_free_page(GFP_KERNEL); - if (!q->slib) { - kmem_cache_free(qdio_q_cache, q); - return -ENOMEM; - } - irq_ptr->input_qs[i]=q; - } - - for (i = 0; i < no_output_qs; i++) { - q = kmem_cache_alloc(qdio_q_cache, GFP_KERNEL); - if (!q) - return -ENOMEM; - memset(q, 0, sizeof(*q)); - - q->slib = (struct slib *) __get_free_page(GFP_KERNEL); - if (!q->slib) { - kmem_cache_free(qdio_q_cache, q); - return -ENOMEM; - } - irq_ptr->output_qs[i]=q; - } - return 0; -} - -static void -qdio_fill_qs(struct qdio_irq *irq_ptr, struct ccw_device *cdev, - int no_input_qs, int no_output_qs, - qdio_handler_t *input_handler, - qdio_handler_t *output_handler, - unsigned long int_parm,int q_format, - unsigned long flags, - void **inbound_sbals_array, - void **outbound_sbals_array) -{ - struct qdio_q *q; - int i,j; - char dbf_text[20]; /* see qdio_initialize */ - void *ptr; - int available; - - sprintf(dbf_text,"qfqs%4x",cdev->private->schid.sch_no); - QDIO_DBF_TEXT0(0,setup,dbf_text); - for (i=0;iinput_qs[i]; - - memset(q,0,((char*)&q->slib)-((char*)q)); - sprintf(dbf_text,"in-q%4x",i); - QDIO_DBF_TEXT0(0,setup,dbf_text); - QDIO_DBF_HEX0(0,setup,&q,sizeof(void*)); - - memset(q->slib,0,PAGE_SIZE); - q->sl=(struct sl*)(((char*)q->slib)+PAGE_SIZE/2); - - available=0; - - for (j=0;jsbal[j]=*(inbound_sbals_array++); - - q->queue_type=q_format; - q->int_parm=int_parm; - q->schid = irq_ptr->schid; - q->irq_ptr = irq_ptr; - q->cdev = cdev; - q->mask=1<<(31-i); - q->q_no=i; - q->is_input_q=1; - q->first_to_check=0; - q->last_move_ftc=0; - q->handler=input_handler; - q->dev_st_chg_ind=irq_ptr->dev_st_chg_ind; - - /* q->is_thinint_q isn't valid at this time, but - * irq_ptr->is_thinint_irq is - */ - if (irq_ptr->is_thinint_irq) - tasklet_init(&q->tasklet, tiqdio_inbound_processing, - (unsigned long) q); - else - tasklet_init(&q->tasklet, qdio_inbound_processing, - (unsigned long) q); - - /* actually this is not used for inbound queues. yet. */ - atomic_set(&q->busy_siga_counter,0); - q->timing.busy_start=0; - -/* for (j=0;jtiming.last_transfer_times[j]=(qdio_get_micros()/ - QDIO_STATS_NUMBER)*j; - q->timing.last_transfer_index=QDIO_STATS_NUMBER-1; -*/ - - /* fill in slib */ - if (i>0) irq_ptr->input_qs[i-1]->slib->nsliba= - (unsigned long)(q->slib); - q->slib->sla=(unsigned long)(q->sl); - q->slib->slsba=(unsigned long)(&q->slsb.acc.val[0]); - - /* fill in sl */ - for (j=0;jsl->element[j].sbal=(unsigned long)(q->sbal[j]); - - QDIO_DBF_TEXT2(0,setup,"sl-sb-b0"); - ptr=(void*)q->sl; - QDIO_DBF_HEX2(0,setup,&ptr,sizeof(void*)); - ptr=(void*)&q->slsb; - QDIO_DBF_HEX2(0,setup,&ptr,sizeof(void*)); - ptr=(void*)q->sbal[0]; - QDIO_DBF_HEX2(0,setup,&ptr,sizeof(void*)); - - /* fill in slsb */ - if (!irq_ptr->is_qebsm) { - unsigned int count = 1; - for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; j++) - set_slsb(q, &j, SLSB_P_INPUT_NOT_INIT, &count); - } - } - - for (i=0;ioutput_qs[i]; - memset(q,0,((char*)&q->slib)-((char*)q)); - - sprintf(dbf_text,"outq%4x",i); - QDIO_DBF_TEXT0(0,setup,dbf_text); - QDIO_DBF_HEX0(0,setup,&q,sizeof(void*)); - - memset(q->slib,0,PAGE_SIZE); - q->sl=(struct sl*)(((char*)q->slib)+PAGE_SIZE/2); - - available=0; - - for (j=0;jsbal[j]=*(outbound_sbals_array++); - - q->queue_type=q_format; - if ((q->queue_type == QDIO_IQDIO_QFMT) && - (no_output_qs > 1) && - (i == no_output_qs-1)) - q->queue_type = QDIO_IQDIO_QFMT_ASYNCH; - q->int_parm=int_parm; - q->is_input_q=0; - q->is_pci_out = 0; - q->schid = irq_ptr->schid; - q->cdev = cdev; - q->irq_ptr = irq_ptr; - q->mask=1<<(31-i); - q->q_no=i; - q->first_to_check=0; - q->last_move_ftc=0; - q->handler=output_handler; - - tasklet_init(&q->tasklet, qdio_outbound_processing, - (unsigned long) q); - setup_timer(&q->timer, qdio_outbound_processing, - (unsigned long) q); - - atomic_set(&q->busy_siga_counter,0); - q->timing.busy_start=0; - - /* fill in slib */ - if (i>0) irq_ptr->output_qs[i-1]->slib->nsliba= - (unsigned long)(q->slib); - q->slib->sla=(unsigned long)(q->sl); - q->slib->slsba=(unsigned long)(&q->slsb.acc.val[0]); - - /* fill in sl */ - for (j=0;jsl->element[j].sbal=(unsigned long)(q->sbal[j]); - - QDIO_DBF_TEXT2(0,setup,"sl-sb-b0"); - ptr=(void*)q->sl; - QDIO_DBF_HEX2(0,setup,&ptr,sizeof(void*)); - ptr=(void*)&q->slsb; - QDIO_DBF_HEX2(0,setup,&ptr,sizeof(void*)); - ptr=(void*)q->sbal[0]; - QDIO_DBF_HEX2(0,setup,&ptr,sizeof(void*)); - - /* fill in slsb */ - if (!irq_ptr->is_qebsm) { - unsigned int count = 1; - for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; j++) - set_slsb(q, &j, SLSB_P_OUTPUT_NOT_INIT, &count); - } - } -} - -static void -qdio_fill_thresholds(struct qdio_irq *irq_ptr, - unsigned int no_input_qs, - unsigned int no_output_qs, - unsigned int min_input_threshold, - unsigned int max_input_threshold, - unsigned int min_output_threshold, - unsigned int max_output_threshold) -{ - int i; - struct qdio_q *q; - - for (i=0;iinput_qs[i]; - q->timing.threshold=max_input_threshold; -/* for (j=0;jthreshold_classes[j].threshold= - min_input_threshold+ - (max_input_threshold-min_input_threshold)/ - QDIO_STATS_CLASSES; - } - qdio_use_thresholds(q,QDIO_STATS_CLASSES/2);*/ - } - for (i=0;ioutput_qs[i]; - q->timing.threshold=max_output_threshold; -/* for (j=0;jthreshold_classes[j].threshold= - min_output_threshold+ - (max_output_threshold-min_output_threshold)/ - QDIO_STATS_CLASSES; - } - qdio_use_thresholds(q,QDIO_STATS_CLASSES/2);*/ - } -} - -static void tiqdio_thinint_handler(void *ind, void *drv_data) -{ - QDIO_DBF_TEXT4(0,trace,"thin_int"); - - qdio_perf_stat_inc(&perf_stats.thinints); - - /* SVS only when needed: - * issue SVS to benefit from iqdio interrupt avoidance - * (SVS clears AISOI)*/ - if (!omit_svs) - tiqdio_clear_global_summary(); - - tiqdio_inbound_checks(); -} - -static void -qdio_set_state(struct qdio_irq *irq_ptr, enum qdio_irq_states state) -{ - int i; -#ifdef CONFIG_QDIO_DEBUG - char dbf_text[15]; - - QDIO_DBF_TEXT5(0,trace,"newstate"); - sprintf(dbf_text,"%4x%4x",irq_ptr->schid.sch_no,state); - QDIO_DBF_TEXT5(0,trace,dbf_text); -#endif /* CONFIG_QDIO_DEBUG */ - - irq_ptr->state=state; - for (i=0;ino_input_qs;i++) - irq_ptr->input_qs[i]->state=state; - for (i=0;ino_output_qs;i++) - irq_ptr->output_qs[i]->state=state; - mb(); -} - -static void -qdio_irq_check_sense(struct subchannel_id schid, struct irb *irb) -{ - char dbf_text[15]; - - if (irb->esw.esw0.erw.cons) { - sprintf(dbf_text,"sens%4x",schid.sch_no); - QDIO_DBF_TEXT2(1,trace,dbf_text); - QDIO_DBF_HEX0(0,sense,irb,QDIO_DBF_SENSE_LEN); - - QDIO_PRINT_WARN("sense data available on qdio channel.\n"); - QDIO_HEXDUMP16(WARN,"irb: ",irb); - QDIO_HEXDUMP16(WARN,"sense data: ",irb->ecw); - } - -} - -static void -qdio_handle_pci(struct qdio_irq *irq_ptr) -{ - int i; - struct qdio_q *q; - - qdio_perf_stat_inc(&perf_stats.pcis); - for (i=0;ino_input_qs;i++) { - q=irq_ptr->input_qs[i]; - if (q->is_input_q&QDIO_FLAG_NO_INPUT_INTERRUPT_CONTEXT) - qdio_mark_q(q); - else { - qdio_perf_stat_dec(&perf_stats.tl_runs); - __qdio_inbound_processing(q); - } - } - if (!irq_ptr->hydra_gives_outbound_pcis) - return; - for (i=0;ino_output_qs;i++) { - q=irq_ptr->output_qs[i]; - if (qdio_is_outbound_q_done(q)) - continue; - qdio_perf_stat_dec(&perf_stats.tl_runs); - if (!irq_ptr->sync_done_on_outb_pcis) - SYNC_MEMORY; - __qdio_outbound_processing(q); - } -} - -static void qdio_establish_handle_irq(struct ccw_device*, int, int); - -static void -qdio_handle_activate_check(struct ccw_device *cdev, unsigned long intparm, - int cstat, int dstat) -{ - struct qdio_irq *irq_ptr; - struct qdio_q *q; - char dbf_text[15]; - - irq_ptr = cdev->private->qdio_data; - - QDIO_DBF_TEXT2(1, trace, "ick2"); - sprintf(dbf_text,"%s", cdev->dev.bus_id); - QDIO_DBF_TEXT2(1,trace,dbf_text); - QDIO_DBF_HEX2(0,trace,&intparm,sizeof(int)); - QDIO_DBF_HEX2(0,trace,&dstat,sizeof(int)); - QDIO_DBF_HEX2(0,trace,&cstat,sizeof(int)); - QDIO_PRINT_ERR("received check condition on activate " \ - "queues on device %s (cs=x%x, ds=x%x).\n", - cdev->dev.bus_id, cstat, dstat); - if (irq_ptr->no_input_qs) { - q=irq_ptr->input_qs[0]; - } else if (irq_ptr->no_output_qs) { - q=irq_ptr->output_qs[0]; - } else { - QDIO_PRINT_ERR("oops... no queue registered for device %s!?\n", - cdev->dev.bus_id); - goto omit_handler_call; - } - q->handler(q->cdev,QDIO_STATUS_ACTIVATE_CHECK_CONDITION| - QDIO_STATUS_LOOK_FOR_ERROR, - 0,0,0,-1,-1,q->int_parm); -omit_handler_call: - qdio_set_state(irq_ptr,QDIO_IRQ_STATE_STOPPED); - -} - -static void -qdio_call_shutdown(struct work_struct *work) -{ - struct ccw_device_private *priv; - struct ccw_device *cdev; - - priv = container_of(work, struct ccw_device_private, kick_work); - cdev = priv->cdev; - qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); - put_device(&cdev->dev); -} - -static void -qdio_timeout_handler(struct ccw_device *cdev) -{ - struct qdio_irq *irq_ptr; - char dbf_text[15]; - - QDIO_DBF_TEXT2(0, trace, "qtoh"); - sprintf(dbf_text, "%s", cdev->dev.bus_id); - QDIO_DBF_TEXT2(0, trace, dbf_text); - - irq_ptr = cdev->private->qdio_data; - sprintf(dbf_text, "state:%d", irq_ptr->state); - QDIO_DBF_TEXT2(0, trace, dbf_text); - - switch (irq_ptr->state) { - case QDIO_IRQ_STATE_INACTIVE: - QDIO_PRINT_ERR("establish queues on irq 0.%x.%04x: timed out\n", - irq_ptr->schid.ssid, irq_ptr->schid.sch_no); - QDIO_DBF_TEXT2(1,setup,"eq:timeo"); - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); - break; - case QDIO_IRQ_STATE_CLEANUP: - QDIO_PRINT_INFO("Did not get interrupt on cleanup, " - "irq=0.%x.%x.\n", - irq_ptr->schid.ssid, irq_ptr->schid.sch_no); - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); - break; - case QDIO_IRQ_STATE_ESTABLISHED: - case QDIO_IRQ_STATE_ACTIVE: - /* I/O has been terminated by common I/O layer. */ - QDIO_PRINT_INFO("Queues on irq 0.%x.%04x killed by cio.\n", - irq_ptr->schid.ssid, irq_ptr->schid.sch_no); - QDIO_DBF_TEXT2(1, trace, "cio:term"); - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); - if (get_device(&cdev->dev)) { - /* Can't call shutdown from interrupt context. */ - PREPARE_WORK(&cdev->private->kick_work, - qdio_call_shutdown); - queue_work(ccw_device_work, &cdev->private->kick_work); - } - break; - default: - BUG(); - } - wake_up(&cdev->private->wait_q); -} - -static void -qdio_handler(struct ccw_device *cdev, unsigned long intparm, struct irb *irb) -{ - struct qdio_irq *irq_ptr; - int cstat,dstat; - char dbf_text[15]; - -#ifdef CONFIG_QDIO_DEBUG - QDIO_DBF_TEXT4(0, trace, "qint"); - sprintf(dbf_text, "%s", cdev->dev.bus_id); - QDIO_DBF_TEXT4(0, trace, dbf_text); -#endif /* CONFIG_QDIO_DEBUG */ - - if (!intparm) { - QDIO_PRINT_ERR("got unsolicited interrupt in qdio " \ - "handler, device %s\n", cdev->dev.bus_id); - return; - } - - irq_ptr = cdev->private->qdio_data; - if (!irq_ptr) { - QDIO_DBF_TEXT2(1, trace, "uint"); - sprintf(dbf_text,"%s", cdev->dev.bus_id); - QDIO_DBF_TEXT2(1,trace,dbf_text); - QDIO_PRINT_ERR("received interrupt on unused device %s!\n", - cdev->dev.bus_id); - return; - } - - if (IS_ERR(irb)) { - /* Currently running i/o is in error. */ - switch (PTR_ERR(irb)) { - case -EIO: - QDIO_PRINT_ERR("i/o error on device %s\n", - cdev->dev.bus_id); - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); - wake_up(&cdev->private->wait_q); - return; - case -ETIMEDOUT: - qdio_timeout_handler(cdev); - return; - default: - QDIO_PRINT_ERR("unknown error state %ld on device %s\n", - PTR_ERR(irb), cdev->dev.bus_id); - return; - } - } - - qdio_irq_check_sense(irq_ptr->schid, irb); - -#ifdef CONFIG_QDIO_DEBUG - sprintf(dbf_text, "state:%d", irq_ptr->state); - QDIO_DBF_TEXT4(0, trace, dbf_text); -#endif /* CONFIG_QDIO_DEBUG */ - - cstat = irb->scsw.cmd.cstat; - dstat = irb->scsw.cmd.dstat; - - switch (irq_ptr->state) { - case QDIO_IRQ_STATE_INACTIVE: - qdio_establish_handle_irq(cdev, cstat, dstat); - break; - - case QDIO_IRQ_STATE_CLEANUP: - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); - break; - - case QDIO_IRQ_STATE_ESTABLISHED: - case QDIO_IRQ_STATE_ACTIVE: - if (cstat & SCHN_STAT_PCI) { - qdio_handle_pci(irq_ptr); - break; - } - - if ((cstat&~SCHN_STAT_PCI)||dstat) { - qdio_handle_activate_check(cdev, intparm, cstat, dstat); - break; - } - default: - QDIO_PRINT_ERR("got interrupt for queues in state %d on " \ - "device %s?!\n", - irq_ptr->state, cdev->dev.bus_id); - } - wake_up(&cdev->private->wait_q); - -} - -int -qdio_synchronize(struct ccw_device *cdev, unsigned int flags, - unsigned int queue_number) -{ - int cc = 0; - struct qdio_q *q; - struct qdio_irq *irq_ptr; - void *ptr; -#ifdef CONFIG_QDIO_DEBUG - char dbf_text[15]="SyncXXXX"; -#endif - - irq_ptr = cdev->private->qdio_data; - if (!irq_ptr) - return -ENODEV; - -#ifdef CONFIG_QDIO_DEBUG - *((int*)(&dbf_text[4])) = irq_ptr->schid.sch_no; - QDIO_DBF_HEX4(0,trace,dbf_text,QDIO_DBF_TRACE_LEN); - *((int*)(&dbf_text[0]))=flags; - *((int*)(&dbf_text[4]))=queue_number; - QDIO_DBF_HEX4(0,trace,dbf_text,QDIO_DBF_TRACE_LEN); -#endif /* CONFIG_QDIO_DEBUG */ - - if (flags&QDIO_FLAG_SYNC_INPUT) { - q=irq_ptr->input_qs[queue_number]; - if (!q) - return -EINVAL; - if (!(irq_ptr->is_qebsm)) - cc = do_siga_sync(q->schid, 0, q->mask); - } else if (flags&QDIO_FLAG_SYNC_OUTPUT) { - q=irq_ptr->output_qs[queue_number]; - if (!q) - return -EINVAL; - if (!(irq_ptr->is_qebsm)) - cc = do_siga_sync(q->schid, q->mask, 0); - } else - return -EINVAL; - - ptr=&cc; - if (cc) - QDIO_DBF_HEX3(0,trace,&ptr,sizeof(int)); - - return cc; -} - -static int -qdio_get_ssqd_information(struct subchannel_id *schid, - struct qdio_chsc_ssqd **ssqd_area) -{ - int result; - - QDIO_DBF_TEXT0(0, setup, "getssqd"); - *ssqd_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC); - if (!ssqd_area) { - QDIO_PRINT_WARN("Could not get memory for chsc on sch x%x.\n", - schid->sch_no); - return -ENOMEM; - } - - (*ssqd_area)->request = (struct chsc_header) { - .length = 0x0010, - .code = 0x0024, - }; - (*ssqd_area)->first_sch = schid->sch_no; - (*ssqd_area)->last_sch = schid->sch_no; - (*ssqd_area)->ssid = schid->ssid; - result = chsc(*ssqd_area); - - if (result) { - QDIO_PRINT_WARN("CHSC returned cc %i on sch 0.%x.%x.\n", - result, schid->ssid, schid->sch_no); - goto out; - } - - if ((*ssqd_area)->response.code != QDIO_CHSC_RESPONSE_CODE_OK) { - QDIO_PRINT_WARN("CHSC response is 0x%x on sch 0.%x.%x.\n", - (*ssqd_area)->response.code, - schid->ssid, schid->sch_no); - goto out; - } - if (!((*ssqd_area)->flags & CHSC_FLAG_QDIO_CAPABILITY) || - !((*ssqd_area)->flags & CHSC_FLAG_VALIDITY) || - ((*ssqd_area)->sch != schid->sch_no)) { - QDIO_PRINT_WARN("huh? problems checking out sch 0.%x.%x... " \ - "using all SIGAs.\n", - schid->ssid, schid->sch_no); - goto out; - } - return 0; -out: - return -EINVAL; -} - -int -qdio_get_ssqd_pct(struct ccw_device *cdev) -{ - struct qdio_chsc_ssqd *ssqd_area; - struct subchannel_id schid; - char dbf_text[15]; - int rc; - int pct = 0; - - QDIO_DBF_TEXT0(0, setup, "getpct"); - schid = ccw_device_get_subchannel_id(cdev); - rc = qdio_get_ssqd_information(&schid, &ssqd_area); - if (!rc) - pct = (int)ssqd_area->pct; - if (rc != -ENOMEM) - mempool_free(ssqd_area, qdio_mempool_scssc); - sprintf(dbf_text, "pct: %d", pct); - QDIO_DBF_TEXT2(0, setup, dbf_text); - return pct; -} -EXPORT_SYMBOL(qdio_get_ssqd_pct); - -static void -qdio_check_subchannel_qebsm(struct qdio_irq *irq_ptr, unsigned long token) -{ - struct qdio_q *q; - int i; - unsigned int count, start_buf; - char dbf_text[15]; - - /*check if QEBSM is disabled */ - if (!(irq_ptr->is_qebsm) || !(irq_ptr->qdioac & 0x01)) { - irq_ptr->is_qebsm = 0; - irq_ptr->sch_token = 0; - irq_ptr->qib.rflags &= ~QIB_RFLAGS_ENABLE_QEBSM; - QDIO_DBF_TEXT0(0,setup,"noV=V"); - return; - } - irq_ptr->sch_token = token; - /*input queue*/ - for (i = 0; i < irq_ptr->no_input_qs;i++) { - q = irq_ptr->input_qs[i]; - count = QDIO_MAX_BUFFERS_PER_Q; - start_buf = 0; - set_slsb(q, &start_buf, SLSB_P_INPUT_NOT_INIT, &count); - } - sprintf(dbf_text,"V=V:%2x",irq_ptr->is_qebsm); - QDIO_DBF_TEXT0(0,setup,dbf_text); - sprintf(dbf_text,"%8lx",irq_ptr->sch_token); - QDIO_DBF_TEXT0(0,setup,dbf_text); - /*output queue*/ - for (i = 0; i < irq_ptr->no_output_qs; i++) { - q = irq_ptr->output_qs[i]; - count = QDIO_MAX_BUFFERS_PER_Q; - start_buf = 0; - set_slsb(q, &start_buf, SLSB_P_OUTPUT_NOT_INIT, &count); - } -} - -static void -qdio_get_ssqd_siga(struct qdio_irq *irq_ptr) -{ - int rc; - struct qdio_chsc_ssqd *ssqd_area; - - QDIO_DBF_TEXT0(0,setup,"getssqd"); - irq_ptr->qdioac = 0; - rc = qdio_get_ssqd_information(&irq_ptr->schid, &ssqd_area); - if (rc) { - QDIO_PRINT_WARN("using all SIGAs for sch x%x.n", - irq_ptr->schid.sch_no); - irq_ptr->qdioac = CHSC_FLAG_SIGA_INPUT_NECESSARY | - CHSC_FLAG_SIGA_OUTPUT_NECESSARY | - CHSC_FLAG_SIGA_SYNC_NECESSARY; /* all flags set */ - irq_ptr->is_qebsm = 0; - } else - irq_ptr->qdioac = ssqd_area->qdioac1; - - qdio_check_subchannel_qebsm(irq_ptr, ssqd_area->sch_token); - if (rc != -ENOMEM) - mempool_free(ssqd_area, qdio_mempool_scssc); -} - -static unsigned int -tiqdio_check_chsc_availability(void) -{ - char dbf_text[15]; - - /* Check for bit 41. */ - if (!css_general_characteristics.aif) { - QDIO_PRINT_WARN("Adapter interruption facility not " \ - "installed.\n"); - return -ENOENT; - } - - /* Check for bits 107 and 108. */ - if (!css_chsc_characteristics.scssc || - !css_chsc_characteristics.scsscf) { - QDIO_PRINT_WARN("Set Chan Subsys. Char. & Fast-CHSCs " \ - "not available.\n"); - return -ENOENT; - } - - /* Check for OSA/FCP thin interrupts (bit 67). */ - hydra_thinints = css_general_characteristics.aif_osa; - sprintf(dbf_text,"hydrati%1x", hydra_thinints); - QDIO_DBF_TEXT0(0,setup,dbf_text); - -#ifdef CONFIG_64BIT - /* Check for QEBSM support in general (bit 58). */ - is_passthrough = css_general_characteristics.qebsm; -#endif - sprintf(dbf_text,"cssQBS:%1x", is_passthrough); - QDIO_DBF_TEXT0(0,setup,dbf_text); - - /* Check for aif time delay disablement fac (bit 56). If installed, - * omit svs even under lpar (good point by rick again) */ - omit_svs = css_general_characteristics.aif_tdd; - sprintf(dbf_text,"omitsvs%1x", omit_svs); - QDIO_DBF_TEXT0(0,setup,dbf_text); - return 0; -} - - -static unsigned int -tiqdio_set_subchannel_ind(struct qdio_irq *irq_ptr, int reset_to_zero) -{ - unsigned long real_addr_local_summary_bit; - unsigned long real_addr_dev_st_chg_ind; - void *ptr; - char dbf_text[15]; - - unsigned int resp_code; - int result; - - struct { - struct chsc_header request; - u16 operation_code; - u16 reserved1; - u32 reserved2; - u32 reserved3; - u64 summary_indicator_addr; - u64 subchannel_indicator_addr; - u32 ks:4; - u32 kc:4; - u32 reserved4:21; - u32 isc:3; - u32 word_with_d_bit; - /* set to 0x10000000 to enable - * time delay disablement facility */ - u32 reserved5; - struct subchannel_id schid; - u32 reserved6[1004]; - struct chsc_header response; - u32 reserved7; - } *scssc_area; - - if (!irq_ptr->is_thinint_irq) - return -ENODEV; - - if (reset_to_zero) { - real_addr_local_summary_bit=0; - real_addr_dev_st_chg_ind=0; - } else { - real_addr_local_summary_bit= - virt_to_phys((volatile void *)tiqdio_ind); - real_addr_dev_st_chg_ind= - virt_to_phys((volatile void *)irq_ptr->dev_st_chg_ind); - } - - scssc_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC); - if (!scssc_area) { - QDIO_PRINT_WARN("No memory for setting indicators on " \ - "subchannel 0.%x.%x.\n", - irq_ptr->schid.ssid, irq_ptr->schid.sch_no); - return -ENOMEM; - } - scssc_area->request = (struct chsc_header) { - .length = 0x0fe0, - .code = 0x0021, - }; - scssc_area->operation_code = 0; - - scssc_area->summary_indicator_addr = real_addr_local_summary_bit; - scssc_area->subchannel_indicator_addr = real_addr_dev_st_chg_ind; - scssc_area->ks = QDIO_STORAGE_KEY; - scssc_area->kc = QDIO_STORAGE_KEY; - scssc_area->isc = TIQDIO_THININT_ISC; - scssc_area->schid = irq_ptr->schid; - /* enables the time delay disablement facility. Don't care - * whether it is really there (i.e. we haven't checked for - * it) */ - if (css_general_characteristics.aif_tdd) - scssc_area->word_with_d_bit = 0x10000000; - else - QDIO_PRINT_WARN("Time delay disablement facility " \ - "not available\n"); - - result = chsc(scssc_area); - if (result) { - QDIO_PRINT_WARN("could not set indicators on irq 0.%x.%x, " \ - "cc=%i.\n", - irq_ptr->schid.ssid, irq_ptr->schid.sch_no,result); - result = -EIO; - goto out; - } - - resp_code = scssc_area->response.code; - if (resp_code!=QDIO_CHSC_RESPONSE_CODE_OK) { - QDIO_PRINT_WARN("response upon setting indicators " \ - "is 0x%x.\n",resp_code); - sprintf(dbf_text,"sidR%4x",resp_code); - QDIO_DBF_TEXT1(0,trace,dbf_text); - QDIO_DBF_TEXT1(0,setup,dbf_text); - ptr=&scssc_area->response; - QDIO_DBF_HEX2(1,setup,&ptr,QDIO_DBF_SETUP_LEN); - result = -EIO; - goto out; - } - - QDIO_DBF_TEXT2(0,setup,"setscind"); - QDIO_DBF_HEX2(0,setup,&real_addr_local_summary_bit, - sizeof(unsigned long)); - QDIO_DBF_HEX2(0,setup,&real_addr_dev_st_chg_ind,sizeof(unsigned long)); - result = 0; -out: - mempool_free(scssc_area, qdio_mempool_scssc); - return result; - -} - -static unsigned int -tiqdio_set_delay_target(struct qdio_irq *irq_ptr, unsigned long delay_target) -{ - unsigned int resp_code; - int result; - void *ptr; - char dbf_text[15]; - - struct { - struct chsc_header request; - u16 operation_code; - u16 reserved1; - u32 reserved2; - u32 reserved3; - u32 reserved4[2]; - u32 delay_target; - u32 reserved5[1009]; - struct chsc_header response; - u32 reserved6; - } *scsscf_area; - - if (!irq_ptr->is_thinint_irq) - return -ENODEV; - - scsscf_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC); - if (!scsscf_area) { - QDIO_PRINT_WARN("No memory for setting delay target on " \ - "subchannel 0.%x.%x.\n", - irq_ptr->schid.ssid, irq_ptr->schid.sch_no); - return -ENOMEM; - } - scsscf_area->request = (struct chsc_header) { - .length = 0x0fe0, - .code = 0x1027, - }; - - scsscf_area->delay_target = delay_target<<16; - - result=chsc(scsscf_area); - if (result) { - QDIO_PRINT_WARN("could not set delay target on irq 0.%x.%x, " \ - "cc=%i. Continuing.\n", - irq_ptr->schid.ssid, irq_ptr->schid.sch_no, - result); - result = -EIO; - goto out; - } - - resp_code = scsscf_area->response.code; - if (resp_code!=QDIO_CHSC_RESPONSE_CODE_OK) { - QDIO_PRINT_WARN("response upon setting delay target " \ - "is 0x%x. Continuing.\n",resp_code); - sprintf(dbf_text,"sdtR%4x",resp_code); - QDIO_DBF_TEXT1(0,trace,dbf_text); - QDIO_DBF_TEXT1(0,setup,dbf_text); - ptr=&scsscf_area->response; - QDIO_DBF_HEX2(1,trace,&ptr,QDIO_DBF_TRACE_LEN); - } - QDIO_DBF_TEXT2(0,trace,"delytrgt"); - QDIO_DBF_HEX2(0,trace,&delay_target,sizeof(unsigned long)); - result = 0; /* not critical */ -out: - mempool_free(scsscf_area, qdio_mempool_scssc); - return result; -} - -int -qdio_cleanup(struct ccw_device *cdev, int how) -{ - struct qdio_irq *irq_ptr; - char dbf_text[15]; - int rc; - - irq_ptr = cdev->private->qdio_data; - if (!irq_ptr) - return -ENODEV; - - sprintf(dbf_text,"qcln%4x",irq_ptr->schid.sch_no); - QDIO_DBF_TEXT1(0,trace,dbf_text); - QDIO_DBF_TEXT0(0,setup,dbf_text); - - rc = qdio_shutdown(cdev, how); - if ((rc == 0) || (rc == -EINPROGRESS)) - rc = qdio_free(cdev); - return rc; -} - -int -qdio_shutdown(struct ccw_device *cdev, int how) -{ - struct qdio_irq *irq_ptr; - int i; - int result = 0; - int rc; - unsigned long flags; - int timeout; - char dbf_text[15]; - - irq_ptr = cdev->private->qdio_data; - if (!irq_ptr) - return -ENODEV; - - down(&irq_ptr->setting_up_sema); - - sprintf(dbf_text,"qsqs%4x",irq_ptr->schid.sch_no); - QDIO_DBF_TEXT1(0,trace,dbf_text); - QDIO_DBF_TEXT0(0,setup,dbf_text); - - /* mark all qs as uninteresting */ - for (i=0;ino_input_qs;i++) - atomic_set(&irq_ptr->input_qs[i]->is_in_shutdown,1); - - for (i=0;ino_output_qs;i++) - atomic_set(&irq_ptr->output_qs[i]->is_in_shutdown,1); - - tasklet_kill(&tiqdio_tasklet); - - for (i=0;ino_input_qs;i++) { - qdio_unmark_q(irq_ptr->input_qs[i]); - tasklet_kill(&irq_ptr->input_qs[i]->tasklet); - wait_event_interruptible_timeout(cdev->private->wait_q, - !atomic_read(&irq_ptr-> - input_qs[i]-> - use_count), - QDIO_NO_USE_COUNT_TIMEOUT); - if (atomic_read(&irq_ptr->input_qs[i]->use_count)) - result=-EINPROGRESS; - } - - for (i=0;ino_output_qs;i++) { - tasklet_kill(&irq_ptr->output_qs[i]->tasklet); - del_timer(&irq_ptr->output_qs[i]->timer); - wait_event_interruptible_timeout(cdev->private->wait_q, - !atomic_read(&irq_ptr-> - output_qs[i]-> - use_count), - QDIO_NO_USE_COUNT_TIMEOUT); - if (atomic_read(&irq_ptr->output_qs[i]->use_count)) - result=-EINPROGRESS; - } - - /* cleanup subchannel */ - spin_lock_irqsave(get_ccwdev_lock(cdev),flags); - if (how&QDIO_FLAG_CLEANUP_USING_CLEAR) { - rc = ccw_device_clear(cdev, QDIO_DOING_CLEANUP); - timeout=QDIO_CLEANUP_CLEAR_TIMEOUT; - } else if (how&QDIO_FLAG_CLEANUP_USING_HALT) { - rc = ccw_device_halt(cdev, QDIO_DOING_CLEANUP); - timeout=QDIO_CLEANUP_HALT_TIMEOUT; - } else { /* default behaviour */ - rc = ccw_device_halt(cdev, QDIO_DOING_CLEANUP); - timeout=QDIO_CLEANUP_HALT_TIMEOUT; - } - if (rc == -ENODEV) { - /* No need to wait for device no longer present. */ - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); - spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags); - } else if (((void *)cdev->handler != (void *)qdio_handler) && rc == 0) { - /* - * Whoever put another handler there, has to cope with the - * interrupt theirself. Might happen if qdio_shutdown was - * called on already shutdown queues, but this shouldn't have - * bad side effects. - */ - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); - spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags); - } else if (rc == 0) { - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_CLEANUP); - spin_unlock_irqrestore(get_ccwdev_lock(cdev),flags); - - wait_event_interruptible_timeout(cdev->private->wait_q, - irq_ptr->state == QDIO_IRQ_STATE_INACTIVE || - irq_ptr->state == QDIO_IRQ_STATE_ERR, - timeout); - } else { - QDIO_PRINT_INFO("ccw_device_{halt,clear} returned %d for " - "device %s\n", result, cdev->dev.bus_id); - spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags); - result = rc; - goto out; - } - if (irq_ptr->is_thinint_irq) { - qdio_put_indicator((__u32*)irq_ptr->dev_st_chg_ind); - tiqdio_set_subchannel_ind(irq_ptr,1); - /* reset adapter interrupt indicators */ - } - - /* exchange int handlers, if necessary */ - if ((void*)cdev->handler == (void*)qdio_handler) - cdev->handler=irq_ptr->original_int_handler; - - /* Ignore errors. */ - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); -out: - up(&irq_ptr->setting_up_sema); - return result; -} - -int -qdio_free(struct ccw_device *cdev) -{ - struct qdio_irq *irq_ptr; - char dbf_text[15]; - - irq_ptr = cdev->private->qdio_data; - if (!irq_ptr) - return -ENODEV; - - down(&irq_ptr->setting_up_sema); - - sprintf(dbf_text,"qfqs%4x",irq_ptr->schid.sch_no); - QDIO_DBF_TEXT1(0,trace,dbf_text); - QDIO_DBF_TEXT0(0,setup,dbf_text); - - cdev->private->qdio_data = NULL; - - up(&irq_ptr->setting_up_sema); - - qdio_release_irq_memory(irq_ptr); - module_put(THIS_MODULE); - return 0; -} - -static void -qdio_allocate_do_dbf(struct qdio_initialize *init_data) -{ - char dbf_text[20]; /* if a printf printed out more than 8 chars */ - - sprintf(dbf_text,"qfmt:%x",init_data->q_format); - QDIO_DBF_TEXT0(0,setup,dbf_text); - QDIO_DBF_HEX0(0,setup,init_data->adapter_name,8); - sprintf(dbf_text,"qpff%4x",init_data->qib_param_field_format); - QDIO_DBF_TEXT0(0,setup,dbf_text); - QDIO_DBF_HEX0(0,setup,&init_data->qib_param_field,sizeof(char*)); - QDIO_DBF_HEX0(0,setup,&init_data->input_slib_elements,sizeof(long*)); - QDIO_DBF_HEX0(0,setup,&init_data->output_slib_elements,sizeof(long*)); - sprintf(dbf_text,"miit%4x",init_data->min_input_threshold); - QDIO_DBF_TEXT0(0,setup,dbf_text); - sprintf(dbf_text,"mait%4x",init_data->max_input_threshold); - QDIO_DBF_TEXT0(0,setup,dbf_text); - sprintf(dbf_text,"miot%4x",init_data->min_output_threshold); - QDIO_DBF_TEXT0(0,setup,dbf_text); - sprintf(dbf_text,"maot%4x",init_data->max_output_threshold); - QDIO_DBF_TEXT0(0,setup,dbf_text); - sprintf(dbf_text,"niq:%4x",init_data->no_input_qs); - QDIO_DBF_TEXT0(0,setup,dbf_text); - sprintf(dbf_text,"noq:%4x",init_data->no_output_qs); - QDIO_DBF_TEXT0(0,setup,dbf_text); - QDIO_DBF_HEX0(0,setup,&init_data->input_handler,sizeof(void*)); - QDIO_DBF_HEX0(0,setup,&init_data->output_handler,sizeof(void*)); - QDIO_DBF_HEX0(0,setup,&init_data->int_parm,sizeof(long)); - QDIO_DBF_HEX0(0,setup,&init_data->flags,sizeof(long)); - QDIO_DBF_HEX0(0,setup,&init_data->input_sbal_addr_array,sizeof(void*)); - QDIO_DBF_HEX0(0,setup,&init_data->output_sbal_addr_array,sizeof(void*)); -} - -static void -qdio_allocate_fill_input_desc(struct qdio_irq *irq_ptr, int i, int iqfmt) -{ - irq_ptr->input_qs[i]->is_iqdio_q = iqfmt; - irq_ptr->input_qs[i]->is_thinint_q = irq_ptr->is_thinint_irq; - - irq_ptr->qdr->qdf0[i].sliba=(unsigned long)(irq_ptr->input_qs[i]->slib); - - irq_ptr->qdr->qdf0[i].sla=(unsigned long)(irq_ptr->input_qs[i]->sl); - - irq_ptr->qdr->qdf0[i].slsba= - (unsigned long)(&irq_ptr->input_qs[i]->slsb.acc.val[0]); - - irq_ptr->qdr->qdf0[i].akey=QDIO_STORAGE_KEY; - irq_ptr->qdr->qdf0[i].bkey=QDIO_STORAGE_KEY; - irq_ptr->qdr->qdf0[i].ckey=QDIO_STORAGE_KEY; - irq_ptr->qdr->qdf0[i].dkey=QDIO_STORAGE_KEY; -} - -static void -qdio_allocate_fill_output_desc(struct qdio_irq *irq_ptr, int i, - int j, int iqfmt) -{ - irq_ptr->output_qs[i]->is_iqdio_q = iqfmt; - irq_ptr->output_qs[i]->is_thinint_q = irq_ptr->is_thinint_irq; - - irq_ptr->qdr->qdf0[i+j].sliba=(unsigned long)(irq_ptr->output_qs[i]->slib); - - irq_ptr->qdr->qdf0[i+j].sla=(unsigned long)(irq_ptr->output_qs[i]->sl); - - irq_ptr->qdr->qdf0[i+j].slsba= - (unsigned long)(&irq_ptr->output_qs[i]->slsb.acc.val[0]); - - irq_ptr->qdr->qdf0[i+j].akey=QDIO_STORAGE_KEY; - irq_ptr->qdr->qdf0[i+j].bkey=QDIO_STORAGE_KEY; - irq_ptr->qdr->qdf0[i+j].ckey=QDIO_STORAGE_KEY; - irq_ptr->qdr->qdf0[i+j].dkey=QDIO_STORAGE_KEY; -} - - -static void -qdio_initialize_set_siga_flags_input(struct qdio_irq *irq_ptr) -{ - int i; - - for (i=0;ino_input_qs;i++) { - irq_ptr->input_qs[i]->siga_sync= - irq_ptr->qdioac&CHSC_FLAG_SIGA_SYNC_NECESSARY; - irq_ptr->input_qs[i]->siga_in= - irq_ptr->qdioac&CHSC_FLAG_SIGA_INPUT_NECESSARY; - irq_ptr->input_qs[i]->siga_out= - irq_ptr->qdioac&CHSC_FLAG_SIGA_OUTPUT_NECESSARY; - irq_ptr->input_qs[i]->siga_sync_done_on_thinints= - irq_ptr->qdioac&CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS; - irq_ptr->input_qs[i]->hydra_gives_outbound_pcis= - irq_ptr->hydra_gives_outbound_pcis; - irq_ptr->input_qs[i]->siga_sync_done_on_outb_tis= - ((irq_ptr->qdioac& - (CHSC_FLAG_SIGA_SYNC_DONE_ON_OUTB_PCIS| - CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS))== - (CHSC_FLAG_SIGA_SYNC_DONE_ON_OUTB_PCIS| - CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS)); - - } -} - -static void -qdio_initialize_set_siga_flags_output(struct qdio_irq *irq_ptr) -{ - int i; - - for (i=0;ino_output_qs;i++) { - irq_ptr->output_qs[i]->siga_sync= - irq_ptr->qdioac&CHSC_FLAG_SIGA_SYNC_NECESSARY; - irq_ptr->output_qs[i]->siga_in= - irq_ptr->qdioac&CHSC_FLAG_SIGA_INPUT_NECESSARY; - irq_ptr->output_qs[i]->siga_out= - irq_ptr->qdioac&CHSC_FLAG_SIGA_OUTPUT_NECESSARY; - irq_ptr->output_qs[i]->siga_sync_done_on_thinints= - irq_ptr->qdioac&CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS; - irq_ptr->output_qs[i]->hydra_gives_outbound_pcis= - irq_ptr->hydra_gives_outbound_pcis; - irq_ptr->output_qs[i]->siga_sync_done_on_outb_tis= - ((irq_ptr->qdioac& - (CHSC_FLAG_SIGA_SYNC_DONE_ON_OUTB_PCIS| - CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS))== - (CHSC_FLAG_SIGA_SYNC_DONE_ON_OUTB_PCIS| - CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS)); - - } -} - -static int -qdio_establish_irq_check_for_errors(struct ccw_device *cdev, int cstat, - int dstat) -{ - char dbf_text[15]; - struct qdio_irq *irq_ptr; - - irq_ptr = cdev->private->qdio_data; - - if (cstat || (dstat & ~(DEV_STAT_CHN_END|DEV_STAT_DEV_END))) { - sprintf(dbf_text,"ick1%4x",irq_ptr->schid.sch_no); - QDIO_DBF_TEXT2(1,trace,dbf_text); - QDIO_DBF_HEX2(0,trace,&dstat,sizeof(int)); - QDIO_DBF_HEX2(0,trace,&cstat,sizeof(int)); - QDIO_PRINT_ERR("received check condition on establish " \ - "queues on irq 0.%x.%x (cs=x%x, ds=x%x).\n", - irq_ptr->schid.ssid, irq_ptr->schid.sch_no, - cstat,dstat); - qdio_set_state(irq_ptr,QDIO_IRQ_STATE_ERR); - } - - if (!(dstat & DEV_STAT_DEV_END)) { - QDIO_DBF_TEXT2(1,setup,"eq:no de"); - QDIO_DBF_HEX2(0,setup,&dstat, sizeof(dstat)); - QDIO_DBF_HEX2(0,setup,&cstat, sizeof(cstat)); - QDIO_PRINT_ERR("establish queues on irq 0.%x.%04x: didn't get " - "device end: dstat=%02x, cstat=%02x\n", - irq_ptr->schid.ssid, irq_ptr->schid.sch_no, - dstat, cstat); - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); - return 1; - } - - if (dstat & ~(DEV_STAT_CHN_END|DEV_STAT_DEV_END)) { - QDIO_DBF_TEXT2(1,setup,"eq:badio"); - QDIO_DBF_HEX2(0,setup,&dstat, sizeof(dstat)); - QDIO_DBF_HEX2(0,setup,&cstat, sizeof(cstat)); - QDIO_PRINT_ERR("establish queues on irq 0.%x.%04x: got " - "the following devstat: dstat=%02x, " - "cstat=%02x\n", irq_ptr->schid.ssid, - irq_ptr->schid.sch_no, dstat, cstat); - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); - return 1; - } - return 0; -} - -static void -qdio_establish_handle_irq(struct ccw_device *cdev, int cstat, int dstat) -{ - struct qdio_irq *irq_ptr; - char dbf_text[15]; - - irq_ptr = cdev->private->qdio_data; - - sprintf(dbf_text,"qehi%4x",cdev->private->schid.sch_no); - QDIO_DBF_TEXT0(0,setup,dbf_text); - QDIO_DBF_TEXT0(0,trace,dbf_text); - - if (qdio_establish_irq_check_for_errors(cdev, cstat, dstat)) - return; - - qdio_set_state(irq_ptr,QDIO_IRQ_STATE_ESTABLISHED); -} - -int -qdio_initialize(struct qdio_initialize *init_data) -{ - int rc; - char dbf_text[15]; - - sprintf(dbf_text,"qini%4x",init_data->cdev->private->schid.sch_no); - QDIO_DBF_TEXT0(0,setup,dbf_text); - QDIO_DBF_TEXT0(0,trace,dbf_text); - - rc = qdio_allocate(init_data); - if (rc == 0) { - rc = qdio_establish(init_data); - if (rc != 0) - qdio_free(init_data->cdev); - } - - return rc; -} - - -int -qdio_allocate(struct qdio_initialize *init_data) -{ - struct qdio_irq *irq_ptr; - char dbf_text[15]; - - sprintf(dbf_text,"qalc%4x",init_data->cdev->private->schid.sch_no); - QDIO_DBF_TEXT0(0,setup,dbf_text); - QDIO_DBF_TEXT0(0,trace,dbf_text); - if ( (init_data->no_input_qs>QDIO_MAX_QUEUES_PER_IRQ) || - (init_data->no_output_qs>QDIO_MAX_QUEUES_PER_IRQ) || - ((init_data->no_input_qs) && (!init_data->input_handler)) || - ((init_data->no_output_qs) && (!init_data->output_handler)) ) - return -EINVAL; - - if (!init_data->input_sbal_addr_array) - return -EINVAL; - - if (!init_data->output_sbal_addr_array) - return -EINVAL; - - qdio_allocate_do_dbf(init_data); - - /* create irq */ - irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA); - - QDIO_DBF_TEXT0(0,setup,"irq_ptr:"); - QDIO_DBF_HEX0(0,setup,&irq_ptr,sizeof(void*)); - - if (!irq_ptr) { - QDIO_PRINT_ERR("allocation of irq_ptr failed!\n"); - return -ENOMEM; - } - - init_MUTEX(&irq_ptr->setting_up_sema); - - /* QDR must be in DMA area since CCW data address is only 32 bit */ - irq_ptr->qdr = (struct qdr *) __get_free_page(GFP_KERNEL | GFP_DMA); - if (!(irq_ptr->qdr)) { - free_page((unsigned long) irq_ptr); - QDIO_PRINT_ERR("allocation of irq_ptr->qdr failed!\n"); - return -ENOMEM; - } - QDIO_DBF_TEXT0(0,setup,"qdr:"); - QDIO_DBF_HEX0(0,setup,&irq_ptr->qdr,sizeof(void*)); - - if (qdio_alloc_qs(irq_ptr, - init_data->no_input_qs, - init_data->no_output_qs)) { - QDIO_PRINT_ERR("queue allocation failed!\n"); - qdio_release_irq_memory(irq_ptr); - return -ENOMEM; - } - - init_data->cdev->private->qdio_data = irq_ptr; - - qdio_set_state(irq_ptr,QDIO_IRQ_STATE_INACTIVE); - - return 0; -} - -static int qdio_fill_irq(struct qdio_initialize *init_data) -{ - int i; - char dbf_text[15]; - struct ciw *ciw; - int is_iqdio; - struct qdio_irq *irq_ptr; - - irq_ptr = init_data->cdev->private->qdio_data; - - memset(irq_ptr,0,((char*)&irq_ptr->qdr)-((char*)irq_ptr)); - - /* wipes qib.ac, required by ar7063 */ - memset(irq_ptr->qdr,0,sizeof(struct qdr)); - - irq_ptr->int_parm=init_data->int_parm; - - irq_ptr->schid = ccw_device_get_subchannel_id(init_data->cdev); - irq_ptr->no_input_qs=init_data->no_input_qs; - irq_ptr->no_output_qs=init_data->no_output_qs; - - if (init_data->q_format==QDIO_IQDIO_QFMT) { - irq_ptr->is_iqdio_irq=1; - irq_ptr->is_thinint_irq=1; - } else { - irq_ptr->is_iqdio_irq=0; - irq_ptr->is_thinint_irq=hydra_thinints; - } - sprintf(dbf_text,"is_i_t%1x%1x", - irq_ptr->is_iqdio_irq,irq_ptr->is_thinint_irq); - QDIO_DBF_TEXT2(0,setup,dbf_text); - - if (irq_ptr->is_thinint_irq) { - irq_ptr->dev_st_chg_ind = qdio_get_indicator(); - QDIO_DBF_HEX1(0,setup,&irq_ptr->dev_st_chg_ind,sizeof(void*)); - if (!irq_ptr->dev_st_chg_ind) { - QDIO_PRINT_WARN("no indicator location available " \ - "for irq 0.%x.%x\n", - irq_ptr->schid.ssid, irq_ptr->schid.sch_no); - qdio_release_irq_memory(irq_ptr); - return -ENOBUFS; - } - } - - /* defaults */ - irq_ptr->equeue.cmd=DEFAULT_ESTABLISH_QS_CMD; - irq_ptr->equeue.count=DEFAULT_ESTABLISH_QS_COUNT; - irq_ptr->aqueue.cmd=DEFAULT_ACTIVATE_QS_CMD; - irq_ptr->aqueue.count=DEFAULT_ACTIVATE_QS_COUNT; - - qdio_fill_qs(irq_ptr, init_data->cdev, - init_data->no_input_qs, - init_data->no_output_qs, - init_data->input_handler, - init_data->output_handler,init_data->int_parm, - init_data->q_format,init_data->flags, - init_data->input_sbal_addr_array, - init_data->output_sbal_addr_array); - - if (!try_module_get(THIS_MODULE)) { - QDIO_PRINT_CRIT("try_module_get() failed!\n"); - qdio_release_irq_memory(irq_ptr); - return -EINVAL; - } - - qdio_fill_thresholds(irq_ptr,init_data->no_input_qs, - init_data->no_output_qs, - init_data->min_input_threshold, - init_data->max_input_threshold, - init_data->min_output_threshold, - init_data->max_output_threshold); - - /* fill in qdr */ - irq_ptr->qdr->qfmt=init_data->q_format; - irq_ptr->qdr->iqdcnt=init_data->no_input_qs; - irq_ptr->qdr->oqdcnt=init_data->no_output_qs; - irq_ptr->qdr->iqdsz=sizeof(struct qdesfmt0)/4; /* size in words */ - irq_ptr->qdr->oqdsz=sizeof(struct qdesfmt0)/4; - - irq_ptr->qdr->qiba=(unsigned long)&irq_ptr->qib; - irq_ptr->qdr->qkey=QDIO_STORAGE_KEY; - - /* fill in qib */ - irq_ptr->is_qebsm = is_passthrough; - if (irq_ptr->is_qebsm) - irq_ptr->qib.rflags |= QIB_RFLAGS_ENABLE_QEBSM; - - irq_ptr->qib.qfmt=init_data->q_format; - if (init_data->no_input_qs) - irq_ptr->qib.isliba=(unsigned long)(irq_ptr->input_qs[0]->slib); - if (init_data->no_output_qs) - irq_ptr->qib.osliba=(unsigned long)(irq_ptr->output_qs[0]->slib); - memcpy(irq_ptr->qib.ebcnam,init_data->adapter_name,8); - - qdio_set_impl_params(irq_ptr,init_data->qib_param_field_format, - init_data->qib_param_field, - init_data->no_input_qs, - init_data->no_output_qs, - init_data->input_slib_elements, - init_data->output_slib_elements); - - /* first input descriptors, then output descriptors */ - is_iqdio = (init_data->q_format == QDIO_IQDIO_QFMT) ? 1 : 0; - for (i=0;ino_input_qs;i++) - qdio_allocate_fill_input_desc(irq_ptr, i, is_iqdio); - - for (i=0;ino_output_qs;i++) - qdio_allocate_fill_output_desc(irq_ptr, i, - init_data->no_input_qs, - is_iqdio); - - /* qdr, qib, sls, slsbs, slibs, sbales filled. */ - - /* get qdio commands */ - ciw = ccw_device_get_ciw(init_data->cdev, CIW_TYPE_EQUEUE); - if (!ciw) { - QDIO_DBF_TEXT2(1,setup,"no eq"); - QDIO_PRINT_INFO("No equeue CIW found for QDIO commands. " - "Trying to use default.\n"); - } else - irq_ptr->equeue = *ciw; - ciw = ccw_device_get_ciw(init_data->cdev, CIW_TYPE_AQUEUE); - if (!ciw) { - QDIO_DBF_TEXT2(1,setup,"no aq"); - QDIO_PRINT_INFO("No aqueue CIW found for QDIO commands. " - "Trying to use default.\n"); - } else - irq_ptr->aqueue = *ciw; - - /* Set new interrupt handler. */ - irq_ptr->original_int_handler = init_data->cdev->handler; - init_data->cdev->handler = qdio_handler; - - return 0; -} - -int -qdio_establish(struct qdio_initialize *init_data) -{ - struct qdio_irq *irq_ptr; - unsigned long saveflags; - int result, result2; - struct ccw_device *cdev; - char dbf_text[20]; - - cdev=init_data->cdev; - irq_ptr = cdev->private->qdio_data; - if (!irq_ptr) - return -EINVAL; - - if (cdev->private->state != DEV_STATE_ONLINE) - return -EINVAL; - - down(&irq_ptr->setting_up_sema); - - qdio_fill_irq(init_data); - - /* the thinint CHSC stuff */ - if (irq_ptr->is_thinint_irq) { - - result = tiqdio_set_subchannel_ind(irq_ptr,0); - if (result) { - up(&irq_ptr->setting_up_sema); - qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); - return result; - } - tiqdio_set_delay_target(irq_ptr,TIQDIO_DELAY_TARGET); - } - - sprintf(dbf_text,"qest%4x",cdev->private->schid.sch_no); - QDIO_DBF_TEXT0(0,setup,dbf_text); - QDIO_DBF_TEXT0(0,trace,dbf_text); - - /* establish q */ - irq_ptr->ccw.cmd_code=irq_ptr->equeue.cmd; - irq_ptr->ccw.flags=CCW_FLAG_SLI; - irq_ptr->ccw.count=irq_ptr->equeue.count; - irq_ptr->ccw.cda=QDIO_GET_ADDR(irq_ptr->qdr); - - spin_lock_irqsave(get_ccwdev_lock(cdev),saveflags); - - ccw_device_set_options_mask(cdev, 0); - result = ccw_device_start(cdev, &irq_ptr->ccw, - QDIO_DOING_ESTABLISH, 0, 0); - if (result) { - result2 = ccw_device_start(cdev, &irq_ptr->ccw, - QDIO_DOING_ESTABLISH, 0, 0); - sprintf(dbf_text,"eq:io%4x",result); - QDIO_DBF_TEXT2(1,setup,dbf_text); - if (result2) { - sprintf(dbf_text,"eq:io%4x",result); - QDIO_DBF_TEXT2(1,setup,dbf_text); - } - QDIO_PRINT_WARN("establish queues on irq 0.%x.%04x: do_IO " \ - "returned %i, next try returned %i\n", - irq_ptr->schid.ssid, irq_ptr->schid.sch_no, - result, result2); - result=result2; - } - - spin_unlock_irqrestore(get_ccwdev_lock(cdev),saveflags); - - if (result) { - up(&irq_ptr->setting_up_sema); - qdio_shutdown(cdev,QDIO_FLAG_CLEANUP_USING_CLEAR); - return result; - } - - wait_event_interruptible_timeout(cdev->private->wait_q, - irq_ptr->state == QDIO_IRQ_STATE_ESTABLISHED || - irq_ptr->state == QDIO_IRQ_STATE_ERR, - QDIO_ESTABLISH_TIMEOUT); - - if (irq_ptr->state == QDIO_IRQ_STATE_ESTABLISHED) - result = 0; - else { - up(&irq_ptr->setting_up_sema); - qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); - return -EIO; - } - - qdio_get_ssqd_siga(irq_ptr); - /* if this gets set once, we're running under VM and can omit SVSes */ - if (irq_ptr->qdioac&CHSC_FLAG_SIGA_SYNC_NECESSARY) - omit_svs=1; - - sprintf(dbf_text,"qdioac%2x",irq_ptr->qdioac); - QDIO_DBF_TEXT2(0,setup,dbf_text); - - sprintf(dbf_text,"qib ac%2x",irq_ptr->qib.ac); - QDIO_DBF_TEXT2(0,setup,dbf_text); - - irq_ptr->hydra_gives_outbound_pcis= - irq_ptr->qib.ac&QIB_AC_OUTBOUND_PCI_SUPPORTED; - irq_ptr->sync_done_on_outb_pcis= - irq_ptr->qdioac&CHSC_FLAG_SIGA_SYNC_DONE_ON_OUTB_PCIS; - - qdio_initialize_set_siga_flags_input(irq_ptr); - qdio_initialize_set_siga_flags_output(irq_ptr); - - up(&irq_ptr->setting_up_sema); - - return result; - -} - -int -qdio_activate(struct ccw_device *cdev, int flags) -{ - struct qdio_irq *irq_ptr; - int i,result=0,result2; - unsigned long saveflags; - char dbf_text[20]; /* see qdio_initialize */ - - irq_ptr = cdev->private->qdio_data; - if (!irq_ptr) - return -ENODEV; - - if (cdev->private->state != DEV_STATE_ONLINE) - return -EINVAL; - - down(&irq_ptr->setting_up_sema); - if (irq_ptr->state==QDIO_IRQ_STATE_INACTIVE) { - result=-EBUSY; - goto out; - } - - sprintf(dbf_text,"qact%4x", irq_ptr->schid.sch_no); - QDIO_DBF_TEXT2(0,setup,dbf_text); - QDIO_DBF_TEXT2(0,trace,dbf_text); - - /* activate q */ - irq_ptr->ccw.cmd_code=irq_ptr->aqueue.cmd; - irq_ptr->ccw.flags=CCW_FLAG_SLI; - irq_ptr->ccw.count=irq_ptr->aqueue.count; - irq_ptr->ccw.cda=QDIO_GET_ADDR(0); - - spin_lock_irqsave(get_ccwdev_lock(cdev),saveflags); - - ccw_device_set_options(cdev, CCWDEV_REPORT_ALL); - result=ccw_device_start(cdev,&irq_ptr->ccw,QDIO_DOING_ACTIVATE, - 0, DOIO_DENY_PREFETCH); - if (result) { - result2=ccw_device_start(cdev,&irq_ptr->ccw, - QDIO_DOING_ACTIVATE,0,0); - sprintf(dbf_text,"aq:io%4x",result); - QDIO_DBF_TEXT2(1,setup,dbf_text); - if (result2) { - sprintf(dbf_text,"aq:io%4x",result); - QDIO_DBF_TEXT2(1,setup,dbf_text); - } - QDIO_PRINT_WARN("activate queues on irq 0.%x.%04x: do_IO " \ - "returned %i, next try returned %i\n", - irq_ptr->schid.ssid, irq_ptr->schid.sch_no, - result, result2); - result=result2; - } - - spin_unlock_irqrestore(get_ccwdev_lock(cdev),saveflags); - if (result) - goto out; - - for (i=0;ino_input_qs;i++) { - if (irq_ptr->is_thinint_irq) { - /* - * that way we know, that, if we will get interrupted - * by tiqdio_inbound_processing, qdio_unmark_q will - * not be called - */ - qdio_reserve_q(irq_ptr->input_qs[i]); - qdio_mark_tiq(irq_ptr->input_qs[i]); - qdio_release_q(irq_ptr->input_qs[i]); - } - } - - if (flags&QDIO_FLAG_NO_INPUT_INTERRUPT_CONTEXT) { - for (i=0;ino_input_qs;i++) { - irq_ptr->input_qs[i]->is_input_q|= - QDIO_FLAG_NO_INPUT_INTERRUPT_CONTEXT; - } - } - - msleep(QDIO_ACTIVATE_TIMEOUT); - switch (irq_ptr->state) { - case QDIO_IRQ_STATE_STOPPED: - case QDIO_IRQ_STATE_ERR: - up(&irq_ptr->setting_up_sema); - qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); - down(&irq_ptr->setting_up_sema); - result = -EIO; - break; - default: - qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ACTIVE); - result = 0; - } - out: - up(&irq_ptr->setting_up_sema); - - return result; -} - -/* buffers filled forwards again to make Rick happy */ -static void -qdio_do_qdio_fill_input(struct qdio_q *q, unsigned int qidx, - unsigned int count, struct qdio_buffer *buffers) -{ - struct qdio_irq *irq = (struct qdio_irq *) q->irq_ptr; - int tmp = 0; - - qidx &= (QDIO_MAX_BUFFERS_PER_Q - 1); - if (irq->is_qebsm) { - while (count) { - tmp = set_slsb(q, &qidx, SLSB_CU_INPUT_EMPTY, &count); - if (!tmp) - return; - } - return; - } - for (;;) { - set_slsb(q, &qidx, SLSB_CU_INPUT_EMPTY, &count); - count--; - if (!count) break; - qidx = (qidx + 1) & (QDIO_MAX_BUFFERS_PER_Q - 1); - } -} - -static void -qdio_do_qdio_fill_output(struct qdio_q *q, unsigned int qidx, - unsigned int count, struct qdio_buffer *buffers) -{ - struct qdio_irq *irq = (struct qdio_irq *) q->irq_ptr; - int tmp = 0; - - qidx &= (QDIO_MAX_BUFFERS_PER_Q - 1); - if (irq->is_qebsm) { - while (count) { - tmp = set_slsb(q, &qidx, SLSB_CU_OUTPUT_PRIMED, &count); - if (!tmp) - return; - } - return; - } - - for (;;) { - set_slsb(q, &qidx, SLSB_CU_OUTPUT_PRIMED, &count); - count--; - if (!count) break; - qidx = (qidx + 1) & (QDIO_MAX_BUFFERS_PER_Q - 1); - } -} - -static void -do_qdio_handle_inbound(struct qdio_q *q, unsigned int callflags, - unsigned int qidx, unsigned int count, - struct qdio_buffer *buffers) -{ - int used_elements; - - /* This is the inbound handling of queues */ - used_elements=atomic_add_return(count, &q->number_of_buffers_used) - count; - - qdio_do_qdio_fill_input(q,qidx,count,buffers); - - if ((used_elements+count==QDIO_MAX_BUFFERS_PER_Q)&& - (callflags&QDIO_FLAG_UNDER_INTERRUPT)) - atomic_xchg(&q->polling,0); - - if (used_elements) - return; - if (callflags&QDIO_FLAG_DONT_SIGA) - return; - if (q->siga_in) { - int result; - - result=qdio_siga_input(q); - if (result) { - if (q->siga_error) - q->error_status_flags|= - QDIO_STATUS_MORE_THAN_ONE_SIGA_ERROR; - q->error_status_flags|=QDIO_STATUS_LOOK_FOR_ERROR; - q->siga_error=result; - } - } - - qdio_mark_q(q); -} - -static void -do_qdio_handle_outbound(struct qdio_q *q, unsigned int callflags, - unsigned int qidx, unsigned int count, - struct qdio_buffer *buffers) -{ - int used_elements; - unsigned int cnt, start_buf; - unsigned char state = 0; - struct qdio_irq *irq = (struct qdio_irq *) q->irq_ptr; - - /* This is the outbound handling of queues */ - qdio_do_qdio_fill_output(q,qidx,count,buffers); - - used_elements=atomic_add_return(count, &q->number_of_buffers_used) - count; - - if (callflags&QDIO_FLAG_DONT_SIGA) { - qdio_perf_stat_inc(&perf_stats.outbound_cnt); - return; - } - if (callflags & QDIO_FLAG_PCI_OUT) - q->is_pci_out = 1; - else - q->is_pci_out = 0; - if (q->is_iqdio_q) { - /* one siga for every sbal */ - while (count--) - qdio_kick_outbound_q(q); - - __qdio_outbound_processing(q); - } else { - /* under VM, we do a SIGA sync unconditionally */ - SYNC_MEMORY; - else { - /* - * w/o shadow queues (else branch of - * SYNC_MEMORY :-/ ), we try to - * fast-requeue buffers - */ - if (irq->is_qebsm) { - cnt = 1; - start_buf = ((qidx+QDIO_MAX_BUFFERS_PER_Q-1) & - (QDIO_MAX_BUFFERS_PER_Q-1)); - qdio_do_eqbs(q, &state, &start_buf, &cnt); - } else - state = q->slsb.acc.val[(qidx+QDIO_MAX_BUFFERS_PER_Q-1) - &(QDIO_MAX_BUFFERS_PER_Q-1) ]; - if (state != SLSB_CU_OUTPUT_PRIMED) { - qdio_kick_outbound_q(q); - } else { - QDIO_DBF_TEXT3(0,trace, "fast-req"); - qdio_perf_stat_inc(&perf_stats.fast_reqs); - } - } - /* - * only marking the q could take too long, - * the upper layer module could do a lot of - * traffic in that time - */ - __qdio_outbound_processing(q); - } - - qdio_perf_stat_inc(&perf_stats.outbound_cnt); -} - -/* count must be 1 in iqdio */ -int -do_QDIO(struct ccw_device *cdev,unsigned int callflags, - unsigned int queue_number, unsigned int qidx, - unsigned int count,struct qdio_buffer *buffers) -{ - struct qdio_irq *irq_ptr; -#ifdef CONFIG_QDIO_DEBUG - char dbf_text[20]; - - sprintf(dbf_text,"doQD%04x",cdev->private->schid.sch_no); - QDIO_DBF_TEXT3(0,trace,dbf_text); -#endif /* CONFIG_QDIO_DEBUG */ - - if ( (qidx>QDIO_MAX_BUFFERS_PER_Q) || - (count>QDIO_MAX_BUFFERS_PER_Q) || - (queue_number>QDIO_MAX_QUEUES_PER_IRQ) ) - return -EINVAL; - - if (count==0) - return 0; - - irq_ptr = cdev->private->qdio_data; - if (!irq_ptr) - return -ENODEV; - -#ifdef CONFIG_QDIO_DEBUG - if (callflags&QDIO_FLAG_SYNC_INPUT) - QDIO_DBF_HEX3(0,trace,&irq_ptr->input_qs[queue_number], - sizeof(void*)); - else - QDIO_DBF_HEX3(0,trace,&irq_ptr->output_qs[queue_number], - sizeof(void*)); - sprintf(dbf_text,"flag%04x",callflags); - QDIO_DBF_TEXT3(0,trace,dbf_text); - sprintf(dbf_text,"qi%02xct%02x",qidx,count); - QDIO_DBF_TEXT3(0,trace,dbf_text); -#endif /* CONFIG_QDIO_DEBUG */ - - if (irq_ptr->state!=QDIO_IRQ_STATE_ACTIVE) - return -EBUSY; - - if (callflags&QDIO_FLAG_SYNC_INPUT) - do_qdio_handle_inbound(irq_ptr->input_qs[queue_number], - callflags, qidx, count, buffers); - else if (callflags&QDIO_FLAG_SYNC_OUTPUT) - do_qdio_handle_outbound(irq_ptr->output_qs[queue_number], - callflags, qidx, count, buffers); - else { - QDIO_DBF_TEXT3(1,trace,"doQD:inv"); - return -EINVAL; - } - return 0; -} - -static int -qdio_perf_procfile_read(char *buffer, char **buffer_location, off_t offset, - int buffer_length, int *eof, void *data) -{ - int c=0; - - /* we are always called with buffer_length=4k, so we all - deliver on the first read */ - if (offset>0) - return 0; - -#define _OUTP_IT(x...) c+=sprintf(buffer+c,x) -#ifdef CONFIG_64BIT - _OUTP_IT("Number of tasklet runs (total) : %li\n", - (long)atomic64_read(&perf_stats.tl_runs)); - _OUTP_IT("Inbound tasklet runs tried/retried : %li/%li\n", - (long)atomic64_read(&perf_stats.inbound_tl_runs), - (long)atomic64_read(&perf_stats.inbound_tl_runs_resched)); - _OUTP_IT("Inbound-thin tasklet runs tried/retried : %li/%li\n", - (long)atomic64_read(&perf_stats.inbound_thin_tl_runs), - (long)atomic64_read(&perf_stats.inbound_thin_tl_runs_resched)); - _OUTP_IT("Outbound tasklet runs tried/retried : %li/%li\n", - (long)atomic64_read(&perf_stats.outbound_tl_runs), - (long)atomic64_read(&perf_stats.outbound_tl_runs_resched)); - _OUTP_IT("\n"); - _OUTP_IT("Number of SIGA sync's issued : %li\n", - (long)atomic64_read(&perf_stats.siga_syncs)); - _OUTP_IT("Number of SIGA in's issued : %li\n", - (long)atomic64_read(&perf_stats.siga_ins)); - _OUTP_IT("Number of SIGA out's issued : %li\n", - (long)atomic64_read(&perf_stats.siga_outs)); - _OUTP_IT("Number of PCIs caught : %li\n", - (long)atomic64_read(&perf_stats.pcis)); - _OUTP_IT("Number of adapter interrupts caught : %li\n", - (long)atomic64_read(&perf_stats.thinints)); - _OUTP_IT("Number of fast requeues (outg. SBALs w/o SIGA) : %li\n", - (long)atomic64_read(&perf_stats.fast_reqs)); - _OUTP_IT("\n"); - _OUTP_IT("Number of inbound transfers : %li\n", - (long)atomic64_read(&perf_stats.inbound_cnt)); - _OUTP_IT("Number of do_QDIOs outbound : %li\n", - (long)atomic64_read(&perf_stats.outbound_cnt)); -#else /* CONFIG_64BIT */ - _OUTP_IT("Number of tasklet runs (total) : %i\n", - atomic_read(&perf_stats.tl_runs)); - _OUTP_IT("Inbound tasklet runs tried/retried : %i/%i\n", - atomic_read(&perf_stats.inbound_tl_runs), - atomic_read(&perf_stats.inbound_tl_runs_resched)); - _OUTP_IT("Inbound-thin tasklet runs tried/retried : %i/%i\n", - atomic_read(&perf_stats.inbound_thin_tl_runs), - atomic_read(&perf_stats.inbound_thin_tl_runs_resched)); - _OUTP_IT("Outbound tasklet runs tried/retried : %i/%i\n", - atomic_read(&perf_stats.outbound_tl_runs), - atomic_read(&perf_stats.outbound_tl_runs_resched)); - _OUTP_IT("\n"); - _OUTP_IT("Number of SIGA sync's issued : %i\n", - atomic_read(&perf_stats.siga_syncs)); - _OUTP_IT("Number of SIGA in's issued : %i\n", - atomic_read(&perf_stats.siga_ins)); - _OUTP_IT("Number of SIGA out's issued : %i\n", - atomic_read(&perf_stats.siga_outs)); - _OUTP_IT("Number of PCIs caught : %i\n", - atomic_read(&perf_stats.pcis)); - _OUTP_IT("Number of adapter interrupts caught : %i\n", - atomic_read(&perf_stats.thinints)); - _OUTP_IT("Number of fast requeues (outg. SBALs w/o SIGA) : %i\n", - atomic_read(&perf_stats.fast_reqs)); - _OUTP_IT("\n"); - _OUTP_IT("Number of inbound transfers : %i\n", - atomic_read(&perf_stats.inbound_cnt)); - _OUTP_IT("Number of do_QDIOs outbound : %i\n", - atomic_read(&perf_stats.outbound_cnt)); -#endif /* CONFIG_64BIT */ - _OUTP_IT("\n"); - - return c; -} - -static struct proc_dir_entry *qdio_perf_proc_file; - -static void -qdio_add_procfs_entry(void) -{ - proc_perf_file_registration=0; - qdio_perf_proc_file=create_proc_entry(QDIO_PERF, - S_IFREG|0444,NULL); - if (qdio_perf_proc_file) { - qdio_perf_proc_file->read_proc=&qdio_perf_procfile_read; - } else proc_perf_file_registration=-1; - - if (proc_perf_file_registration) - QDIO_PRINT_WARN("was not able to register perf. " \ - "proc-file (%i).\n", - proc_perf_file_registration); -} - -static void -qdio_remove_procfs_entry(void) -{ - if (!proc_perf_file_registration) /* means if it went ok earlier */ - remove_proc_entry(QDIO_PERF,NULL); -} - -/** - * attributes in sysfs - *****************************************************************************/ - -static ssize_t -qdio_performance_stats_show(struct bus_type *bus, char *buf) -{ - return sprintf(buf, "%i\n", qdio_performance_stats ? 1 : 0); -} - -static ssize_t -qdio_performance_stats_store(struct bus_type *bus, const char *buf, size_t count) -{ - unsigned long i; - int ret; - - ret = strict_strtoul(buf, 16, &i); - if (!ret && ((i == 0) || (i == 1))) { - if (i == qdio_performance_stats) - return count; - qdio_performance_stats = i; - if (i==0) { - /* reset perf. stat. info */ -#ifdef CONFIG_64BIT - atomic64_set(&perf_stats.tl_runs, 0); - atomic64_set(&perf_stats.outbound_tl_runs, 0); - atomic64_set(&perf_stats.inbound_tl_runs, 0); - atomic64_set(&perf_stats.inbound_tl_runs_resched, 0); - atomic64_set(&perf_stats.inbound_thin_tl_runs, 0); - atomic64_set(&perf_stats.inbound_thin_tl_runs_resched, - 0); - atomic64_set(&perf_stats.siga_outs, 0); - atomic64_set(&perf_stats.siga_ins, 0); - atomic64_set(&perf_stats.siga_syncs, 0); - atomic64_set(&perf_stats.pcis, 0); - atomic64_set(&perf_stats.thinints, 0); - atomic64_set(&perf_stats.fast_reqs, 0); - atomic64_set(&perf_stats.outbound_cnt, 0); - atomic64_set(&perf_stats.inbound_cnt, 0); -#else /* CONFIG_64BIT */ - atomic_set(&perf_stats.tl_runs, 0); - atomic_set(&perf_stats.outbound_tl_runs, 0); - atomic_set(&perf_stats.inbound_tl_runs, 0); - atomic_set(&perf_stats.inbound_tl_runs_resched, 0); - atomic_set(&perf_stats.inbound_thin_tl_runs, 0); - atomic_set(&perf_stats.inbound_thin_tl_runs_resched, 0); - atomic_set(&perf_stats.siga_outs, 0); - atomic_set(&perf_stats.siga_ins, 0); - atomic_set(&perf_stats.siga_syncs, 0); - atomic_set(&perf_stats.pcis, 0); - atomic_set(&perf_stats.thinints, 0); - atomic_set(&perf_stats.fast_reqs, 0); - atomic_set(&perf_stats.outbound_cnt, 0); - atomic_set(&perf_stats.inbound_cnt, 0); -#endif /* CONFIG_64BIT */ - } - } else { - QDIO_PRINT_ERR("QDIO performance_stats: write 0 or 1 to this file!\n"); - return -EINVAL; - } - return count; -} - -static BUS_ATTR(qdio_performance_stats, 0644, qdio_performance_stats_show, - qdio_performance_stats_store); - -static void -tiqdio_register_thinints(void) -{ - char dbf_text[20]; - - tiqdio_ind = - s390_register_adapter_interrupt(&tiqdio_thinint_handler, NULL, - TIQDIO_THININT_ISC); - if (IS_ERR(tiqdio_ind)) { - sprintf(dbf_text, "regthn%lx", PTR_ERR(tiqdio_ind)); - QDIO_DBF_TEXT0(0,setup,dbf_text); - QDIO_PRINT_ERR("failed to register adapter handler " \ - "(rc=%li).\nAdapter interrupts might " \ - "not work. Continuing.\n", - PTR_ERR(tiqdio_ind)); - tiqdio_ind = NULL; - } -} - -static void -tiqdio_unregister_thinints(void) -{ - if (tiqdio_ind) - s390_unregister_adapter_interrupt(tiqdio_ind, - TIQDIO_THININT_ISC); -} - -static int -qdio_get_qdio_memory(void) -{ - int i; - indicator_used[0]=1; - - for (i=1;i + * Jan Glauber + */ #ifndef _CIO_QDIO_H #define _CIO_QDIO_H #include -#include #include +#include "chsc.h" -#ifdef CONFIG_QDIO_DEBUG -#define QDIO_VERBOSE_LEVEL 9 -#else /* CONFIG_QDIO_DEBUG */ -#define QDIO_VERBOSE_LEVEL 5 -#endif /* CONFIG_QDIO_DEBUG */ -#define QDIO_USE_PROCESSING_STATE - -#define QDIO_MINIMAL_BH_RELIEF_TIME 16 -#define QDIO_TIMER_POLL_VALUE 1 -#define IQDIO_TIMER_POLL_VALUE 1 - -/* - * unfortunately this can't be (QDIO_MAX_BUFFERS_PER_Q*4/3) or so -- as - * we never know, whether we'll get initiative again, e.g. to give the - * transmit skb's back to the stack, however the stack may be waiting for - * them... therefore we define 4 as threshold to start polling (which - * will stop as soon as the asynchronous queue catches up) - * btw, this only applies to the asynchronous HiperSockets queue - */ -#define IQDIO_FILL_LEVEL_TO_POLL 4 - -#define TIQDIO_THININT_ISC QDIO_AIRQ_ISC -#define TIQDIO_DELAY_TARGET 0 -#define QDIO_BUSY_BIT_PATIENCE 100 /* in microsecs */ -#define QDIO_BUSY_BIT_GIVE_UP 10000000 /* 10 seconds */ -#define IQDIO_GLOBAL_LAPS 2 /* GLOBAL_LAPS are not used as we */ -#define IQDIO_GLOBAL_LAPS_INT 1 /* don't global summary */ -#define IQDIO_LOCAL_LAPS 4 -#define IQDIO_LOCAL_LAPS_INT 1 -#define IQDIO_GLOBAL_SUMMARY_CC_MASK 2 -/*#define IQDIO_IQDC_INT_PARM 0x1234*/ - -#define QDIO_Q_LAPS 5 - -#define QDIO_STORAGE_KEY PAGE_DEFAULT_KEY - -#define L2_CACHELINE_SIZE 256 -#define INDICATORS_PER_CACHELINE (L2_CACHELINE_SIZE/sizeof(__u32)) - -#define QDIO_PERF "qdio_perf" - -/* must be a power of 2 */ -/*#define QDIO_STATS_NUMBER 4 - -#define QDIO_STATS_CLASSES 2 -#define QDIO_STATS_COUNT_NEEDED 2*/ - -#define QDIO_NO_USE_COUNT_TIMEOUT (1*HZ) /* wait for 1 sec on each q before - exiting without having use_count - of the queue to 0 */ - -#define QDIO_ESTABLISH_TIMEOUT (1*HZ) -#define QDIO_CLEANUP_CLEAR_TIMEOUT (20*HZ) -#define QDIO_CLEANUP_HALT_TIMEOUT (10*HZ) -#define QDIO_FORCE_CHECK_TIMEOUT (10*HZ) -#define QDIO_ACTIVATE_TIMEOUT (5) /* 5 ms */ +#define QDIO_BUSY_BIT_PATIENCE 100 /* 100 microseconds */ +#define QDIO_BUSY_BIT_GIVE_UP 2000000 /* 2 seconds = eternity */ +#define QDIO_INPUT_THRESHOLD 500 /* 500 microseconds */ enum qdio_irq_states { QDIO_IRQ_STATE_INACTIVE, @@ -72,565 +26,352 @@ enum qdio_irq_states { NR_QDIO_IRQ_STATES, }; -/* used as intparm in do_IO: */ -#define QDIO_DOING_SENSEID 0 -#define QDIO_DOING_ESTABLISH 1 -#define QDIO_DOING_ACTIVATE 2 -#define QDIO_DOING_CLEANUP 3 - -/************************* DEBUG FACILITY STUFF *********************/ - -#define QDIO_DBF_HEX(ex,name,level,addr,len) \ - do { \ - if (ex) \ - debug_exception(qdio_dbf_##name,level,(void*)(addr),len); \ - else \ - debug_event(qdio_dbf_##name,level,(void*)(addr),len); \ - } while (0) -#define QDIO_DBF_TEXT(ex,name,level,text) \ - do { \ - if (ex) \ - debug_text_exception(qdio_dbf_##name,level,text); \ - else \ - debug_text_event(qdio_dbf_##name,level,text); \ - } while (0) - - -#define QDIO_DBF_HEX0(ex,name,addr,len) QDIO_DBF_HEX(ex,name,0,addr,len) -#define QDIO_DBF_HEX1(ex,name,addr,len) QDIO_DBF_HEX(ex,name,1,addr,len) -#define QDIO_DBF_HEX2(ex,name,addr,len) QDIO_DBF_HEX(ex,name,2,addr,len) -#ifdef CONFIG_QDIO_DEBUG -#define QDIO_DBF_HEX3(ex,name,addr,len) QDIO_DBF_HEX(ex,name,3,addr,len) -#define QDIO_DBF_HEX4(ex,name,addr,len) QDIO_DBF_HEX(ex,name,4,addr,len) -#define QDIO_DBF_HEX5(ex,name,addr,len) QDIO_DBF_HEX(ex,name,5,addr,len) -#define QDIO_DBF_HEX6(ex,name,addr,len) QDIO_DBF_HEX(ex,name,6,addr,len) -#else /* CONFIG_QDIO_DEBUG */ -#define QDIO_DBF_HEX3(ex,name,addr,len) do {} while (0) -#define QDIO_DBF_HEX4(ex,name,addr,len) do {} while (0) -#define QDIO_DBF_HEX5(ex,name,addr,len) do {} while (0) -#define QDIO_DBF_HEX6(ex,name,addr,len) do {} while (0) -#endif /* CONFIG_QDIO_DEBUG */ - -#define QDIO_DBF_TEXT0(ex,name,text) QDIO_DBF_TEXT(ex,name,0,text) -#define QDIO_DBF_TEXT1(ex,name,text) QDIO_DBF_TEXT(ex,name,1,text) -#define QDIO_DBF_TEXT2(ex,name,text) QDIO_DBF_TEXT(ex,name,2,text) -#ifdef CONFIG_QDIO_DEBUG -#define QDIO_DBF_TEXT3(ex,name,text) QDIO_DBF_TEXT(ex,name,3,text) -#define QDIO_DBF_TEXT4(ex,name,text) QDIO_DBF_TEXT(ex,name,4,text) -#define QDIO_DBF_TEXT5(ex,name,text) QDIO_DBF_TEXT(ex,name,5,text) -#define QDIO_DBF_TEXT6(ex,name,text) QDIO_DBF_TEXT(ex,name,6,text) -#else /* CONFIG_QDIO_DEBUG */ -#define QDIO_DBF_TEXT3(ex,name,text) do {} while (0) -#define QDIO_DBF_TEXT4(ex,name,text) do {} while (0) -#define QDIO_DBF_TEXT5(ex,name,text) do {} while (0) -#define QDIO_DBF_TEXT6(ex,name,text) do {} while (0) -#endif /* CONFIG_QDIO_DEBUG */ - -#define QDIO_DBF_SETUP_NAME "qdio_setup" -#define QDIO_DBF_SETUP_LEN 8 -#define QDIO_DBF_SETUP_PAGES 4 -#define QDIO_DBF_SETUP_NR_AREAS 1 -#ifdef CONFIG_QDIO_DEBUG -#define QDIO_DBF_SETUP_LEVEL 6 -#else /* CONFIG_QDIO_DEBUG */ -#define QDIO_DBF_SETUP_LEVEL 2 -#endif /* CONFIG_QDIO_DEBUG */ - -#define QDIO_DBF_SBAL_NAME "qdio_labs" /* sbal */ -#define QDIO_DBF_SBAL_LEN 256 -#define QDIO_DBF_SBAL_PAGES 4 -#define QDIO_DBF_SBAL_NR_AREAS 2 -#ifdef CONFIG_QDIO_DEBUG -#define QDIO_DBF_SBAL_LEVEL 6 -#else /* CONFIG_QDIO_DEBUG */ -#define QDIO_DBF_SBAL_LEVEL 2 -#endif /* CONFIG_QDIO_DEBUG */ - -#define QDIO_DBF_TRACE_NAME "qdio_trace" -#define QDIO_DBF_TRACE_LEN 8 -#define QDIO_DBF_TRACE_NR_AREAS 2 -#ifdef CONFIG_QDIO_DEBUG -#define QDIO_DBF_TRACE_PAGES 16 -#define QDIO_DBF_TRACE_LEVEL 4 /* -------- could be even more verbose here */ -#else /* CONFIG_QDIO_DEBUG */ -#define QDIO_DBF_TRACE_PAGES 4 -#define QDIO_DBF_TRACE_LEVEL 2 -#endif /* CONFIG_QDIO_DEBUG */ - -#define QDIO_DBF_SENSE_NAME "qdio_sense" -#define QDIO_DBF_SENSE_LEN 64 -#define QDIO_DBF_SENSE_PAGES 2 -#define QDIO_DBF_SENSE_NR_AREAS 1 -#ifdef CONFIG_QDIO_DEBUG -#define QDIO_DBF_SENSE_LEVEL 6 -#else /* CONFIG_QDIO_DEBUG */ -#define QDIO_DBF_SENSE_LEVEL 2 -#endif /* CONFIG_QDIO_DEBUG */ - -#ifdef CONFIG_QDIO_DEBUG -#define QDIO_TRACE_QTYPE QDIO_ZFCP_QFMT - -#define QDIO_DBF_SLSB_OUT_NAME "qdio_slsb_out" -#define QDIO_DBF_SLSB_OUT_LEN QDIO_MAX_BUFFERS_PER_Q -#define QDIO_DBF_SLSB_OUT_PAGES 256 -#define QDIO_DBF_SLSB_OUT_NR_AREAS 1 -#define QDIO_DBF_SLSB_OUT_LEVEL 6 - -#define QDIO_DBF_SLSB_IN_NAME "qdio_slsb_in" -#define QDIO_DBF_SLSB_IN_LEN QDIO_MAX_BUFFERS_PER_Q -#define QDIO_DBF_SLSB_IN_PAGES 256 -#define QDIO_DBF_SLSB_IN_NR_AREAS 1 -#define QDIO_DBF_SLSB_IN_LEVEL 6 -#endif /* CONFIG_QDIO_DEBUG */ - -#define QDIO_PRINTK_HEADER QDIO_NAME ": " - -#if QDIO_VERBOSE_LEVEL>8 -#define QDIO_PRINT_STUPID(x...) printk( KERN_DEBUG QDIO_PRINTK_HEADER x) -#else -#define QDIO_PRINT_STUPID(x...) do { } while (0) -#endif +/* used as intparm in do_IO */ +#define QDIO_DOING_ESTABLISH 1 +#define QDIO_DOING_ACTIVATE 2 +#define QDIO_DOING_CLEANUP 3 + +#define SLSB_STATE_NOT_INIT 0x0 +#define SLSB_STATE_EMPTY 0x1 +#define SLSB_STATE_PRIMED 0x2 +#define SLSB_STATE_HALTED 0xe +#define SLSB_STATE_ERROR 0xf +#define SLSB_TYPE_INPUT 0x0 +#define SLSB_TYPE_OUTPUT 0x20 +#define SLSB_OWNER_PROG 0x80 +#define SLSB_OWNER_CU 0x40 + +#define SLSB_P_INPUT_NOT_INIT \ + (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_NOT_INIT) /* 0x80 */ +#define SLSB_P_INPUT_ACK \ + (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_EMPTY) /* 0x81 */ +#define SLSB_CU_INPUT_EMPTY \ + (SLSB_OWNER_CU | SLSB_TYPE_INPUT | SLSB_STATE_EMPTY) /* 0x41 */ +#define SLSB_P_INPUT_PRIMED \ + (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_PRIMED) /* 0x82 */ +#define SLSB_P_INPUT_HALTED \ + (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_HALTED) /* 0x8e */ +#define SLSB_P_INPUT_ERROR \ + (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_ERROR) /* 0x8f */ +#define SLSB_P_OUTPUT_NOT_INIT \ + (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_NOT_INIT) /* 0xa0 */ +#define SLSB_P_OUTPUT_EMPTY \ + (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_EMPTY) /* 0xa1 */ +#define SLSB_CU_OUTPUT_PRIMED \ + (SLSB_OWNER_CU | SLSB_TYPE_OUTPUT | SLSB_STATE_PRIMED) /* 0x62 */ +#define SLSB_P_OUTPUT_HALTED \ + (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_HALTED) /* 0xae */ +#define SLSB_P_OUTPUT_ERROR \ + (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_ERROR) /* 0xaf */ + +#define SLSB_ERROR_DURING_LOOKUP 0xff + +/* additional CIWs returned by extended Sense-ID */ +#define CIW_TYPE_EQUEUE 0x3 /* establish QDIO queues */ +#define CIW_TYPE_AQUEUE 0x4 /* activate QDIO queues */ -#if QDIO_VERBOSE_LEVEL>7 -#define QDIO_PRINT_ALL(x...) printk( QDIO_PRINTK_HEADER x) -#else -#define QDIO_PRINT_ALL(x...) do { } while (0) -#endif - -#if QDIO_VERBOSE_LEVEL>6 -#define QDIO_PRINT_INFO(x...) printk( QDIO_PRINTK_HEADER x) -#else -#define QDIO_PRINT_INFO(x...) do { } while (0) -#endif - -#if QDIO_VERBOSE_LEVEL>5 -#define QDIO_PRINT_WARN(x...) printk( QDIO_PRINTK_HEADER x) -#else -#define QDIO_PRINT_WARN(x...) do { } while (0) -#endif - -#if QDIO_VERBOSE_LEVEL>4 -#define QDIO_PRINT_ERR(x...) printk( QDIO_PRINTK_HEADER x) -#else -#define QDIO_PRINT_ERR(x...) do { } while (0) -#endif - -#if QDIO_VERBOSE_LEVEL>3 -#define QDIO_PRINT_CRIT(x...) printk( QDIO_PRINTK_HEADER x) -#else -#define QDIO_PRINT_CRIT(x...) do { } while (0) -#endif - -#if QDIO_VERBOSE_LEVEL>2 -#define QDIO_PRINT_ALERT(x...) printk( QDIO_PRINTK_HEADER x) -#else -#define QDIO_PRINT_ALERT(x...) do { } while (0) -#endif +/* flags for st qdio sch data */ +#define CHSC_FLAG_QDIO_CAPABILITY 0x80 +#define CHSC_FLAG_VALIDITY 0x40 + +/* qdio adapter-characteristics-1 flag */ +#define AC1_SIGA_INPUT_NEEDED 0x40 /* process input queues */ +#define AC1_SIGA_OUTPUT_NEEDED 0x20 /* process output queues */ +#define AC1_SIGA_SYNC_NEEDED 0x10 /* ask hypervisor to sync */ +#define AC1_AUTOMATIC_SYNC_ON_THININT 0x08 /* set by hypervisor */ +#define AC1_AUTOMATIC_SYNC_ON_OUT_PCI 0x04 /* set by hypervisor */ +#define AC1_SC_QEBSM_AVAILABLE 0x02 /* available for subchannel */ +#define AC1_SC_QEBSM_ENABLED 0x01 /* enabled for subchannel */ -#if QDIO_VERBOSE_LEVEL>1 -#define QDIO_PRINT_EMERG(x...) printk( QDIO_PRINTK_HEADER x) -#else -#define QDIO_PRINT_EMERG(x...) do { } while (0) -#endif - -#define QDIO_HEXDUMP16(importance,header,ptr) \ -QDIO_PRINT_##importance(header "%02x %02x %02x %02x " \ - "%02x %02x %02x %02x %02x %02x %02x %02x " \ - "%02x %02x %02x %02x\n",*(((char*)ptr)), \ - *(((char*)ptr)+1),*(((char*)ptr)+2), \ - *(((char*)ptr)+3),*(((char*)ptr)+4), \ - *(((char*)ptr)+5),*(((char*)ptr)+6), \ - *(((char*)ptr)+7),*(((char*)ptr)+8), \ - *(((char*)ptr)+9),*(((char*)ptr)+10), \ - *(((char*)ptr)+11),*(((char*)ptr)+12), \ - *(((char*)ptr)+13),*(((char*)ptr)+14), \ - *(((char*)ptr)+15)); \ -QDIO_PRINT_##importance(header "%02x %02x %02x %02x %02x %02x %02x %02x " \ - "%02x %02x %02x %02x %02x %02x %02x %02x\n", \ - *(((char*)ptr)+16),*(((char*)ptr)+17), \ - *(((char*)ptr)+18),*(((char*)ptr)+19), \ - *(((char*)ptr)+20),*(((char*)ptr)+21), \ - *(((char*)ptr)+22),*(((char*)ptr)+23), \ - *(((char*)ptr)+24),*(((char*)ptr)+25), \ - *(((char*)ptr)+26),*(((char*)ptr)+27), \ - *(((char*)ptr)+28),*(((char*)ptr)+29), \ - *(((char*)ptr)+30),*(((char*)ptr)+31)); - -/****************** END OF DEBUG FACILITY STUFF *********************/ +#ifdef CONFIG_64BIT +static inline int do_sqbs(u64 token, unsigned char state, int queue, + int *start, int *count) +{ + register unsigned long _ccq asm ("0") = *count; + register unsigned long _token asm ("1") = token; + unsigned long _queuestart = ((unsigned long)queue << 32) | *start; -/* - * Some instructions as assembly - */ + asm volatile( + " .insn rsy,0xeb000000008A,%1,0,0(%2)" + : "+d" (_ccq), "+d" (_queuestart) + : "d" ((unsigned long)state), "d" (_token) + : "memory", "cc"); + *count = _ccq & 0xff; + *start = _queuestart & 0xff; -static inline int -do_sqbs(unsigned long sch, unsigned char state, int queue, - unsigned int *start, unsigned int *count) -{ -#ifdef CONFIG_64BIT - register unsigned long _ccq asm ("0") = *count; - register unsigned long _sch asm ("1") = sch; - unsigned long _queuestart = ((unsigned long)queue << 32) | *start; - - asm volatile( - " .insn rsy,0xeb000000008A,%1,0,0(%2)" - : "+d" (_ccq), "+d" (_queuestart) - : "d" ((unsigned long)state), "d" (_sch) - : "memory", "cc"); - *count = _ccq & 0xff; - *start = _queuestart & 0xff; - - return (_ccq >> 32) & 0xff; -#else - return 0; -#endif + return (_ccq >> 32) & 0xff; } -static inline int -do_eqbs(unsigned long sch, unsigned char *state, int queue, - unsigned int *start, unsigned int *count) +static inline int do_eqbs(u64 token, unsigned char *state, int queue, + int *start, int *count) { -#ifdef CONFIG_64BIT register unsigned long _ccq asm ("0") = *count; - register unsigned long _sch asm ("1") = sch; + register unsigned long _token asm ("1") = token; unsigned long _queuestart = ((unsigned long)queue << 32) | *start; unsigned long _state = 0; asm volatile( " .insn rrf,0xB99c0000,%1,%2,0,0" : "+d" (_ccq), "+d" (_queuestart), "+d" (_state) - : "d" (_sch) - : "memory", "cc" ); + : "d" (_token) + : "memory", "cc"); *count = _ccq & 0xff; *start = _queuestart & 0xff; *state = _state & 0xff; return (_ccq >> 32) & 0xff; -#else - return 0; -#endif -} - - -static inline int -do_siga_sync(struct subchannel_id schid, unsigned int mask1, unsigned int mask2) -{ - register unsigned long reg0 asm ("0") = 2; - register struct subchannel_id reg1 asm ("1") = schid; - register unsigned long reg2 asm ("2") = mask1; - register unsigned long reg3 asm ("3") = mask2; - int cc; - - asm volatile( - " siga 0\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (cc) - : "d" (reg0), "d" (reg1), "d" (reg2), "d" (reg3) : "cc"); - return cc; -} - -static inline int -do_siga_input(struct subchannel_id schid, unsigned int mask) -{ - register unsigned long reg0 asm ("0") = 1; - register struct subchannel_id reg1 asm ("1") = schid; - register unsigned long reg2 asm ("2") = mask; - int cc; - - asm volatile( - " siga 0\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (cc) - : "d" (reg0), "d" (reg1), "d" (reg2) : "cc", "memory"); - return cc; -} - -static inline int -do_siga_output(unsigned long schid, unsigned long mask, __u32 *bb, - unsigned int fc) -{ - register unsigned long __fc asm("0") = fc; - register unsigned long __schid asm("1") = schid; - register unsigned long __mask asm("2") = mask; - int cc; - - asm volatile( - " siga 0\n" - "0: ipm %0\n" - " srl %0,28\n" - "1:\n" - EX_TABLE(0b,1b) - : "=d" (cc), "+d" (__fc), "+d" (__schid), "+d" (__mask) - : "0" (QDIO_SIGA_ERROR_ACCESS_EXCEPTION) - : "cc", "memory"); - (*bb) = ((unsigned int) __fc) >> 31; - return cc; -} - -static inline unsigned long -do_clear_global_summary(void) -{ - register unsigned long __fn asm("1") = 3; - register unsigned long __tmp asm("2"); - register unsigned long __time asm("3"); - - asm volatile( - " .insn rre,0xb2650000,2,0" - : "+d" (__fn), "=d" (__tmp), "=d" (__time)); - return __time; } - -/* - * QDIO device commands returned by extended Sense-ID - */ -#define DEFAULT_ESTABLISH_QS_CMD 0x1b -#define DEFAULT_ESTABLISH_QS_COUNT 0x1000 -#define DEFAULT_ACTIVATE_QS_CMD 0x1f -#define DEFAULT_ACTIVATE_QS_COUNT 0 - -/* - * additional CIWs returned by extended Sense-ID - */ -#define CIW_TYPE_EQUEUE 0x3 /* establish QDIO queues */ -#define CIW_TYPE_AQUEUE 0x4 /* activate QDIO queues */ +#else +static inline int do_sqbs(u64 token, unsigned char state, int queue, + int *start, int *count) { return 0; } +static inline int do_eqbs(u64 token, unsigned char *state, int queue, + int *start, int *count) { return 0; } +#endif /* CONFIG_64BIT */ -#define QDIO_CHSC_RESPONSE_CODE_OK 1 -/* flags for st qdio sch data */ -#define CHSC_FLAG_QDIO_CAPABILITY 0x80 -#define CHSC_FLAG_VALIDITY 0x40 +struct qdio_irq; -#define CHSC_FLAG_SIGA_INPUT_NECESSARY 0x40 -#define CHSC_FLAG_SIGA_OUTPUT_NECESSARY 0x20 -#define CHSC_FLAG_SIGA_SYNC_NECESSARY 0x10 -#define CHSC_FLAG_SIGA_SYNC_DONE_ON_THININTS 0x08 -#define CHSC_FLAG_SIGA_SYNC_DONE_ON_OUTB_PCIS 0x04 +struct siga_flag { + u8 input:1; + u8 output:1; + u8 sync:1; + u8 no_sync_ti:1; + u8 no_sync_out_ti:1; + u8 no_sync_out_pci:1; + u8:2; +} __attribute__ ((packed)); -struct qdio_chsc_ssqd { +struct chsc_ssqd_area { struct chsc_header request; - u16 reserved1:10; - u16 ssid:2; - u16 fmt:4; + u16:10; + u8 ssid:2; + u8 fmt:4; u16 first_sch; - u16 reserved2; + u16:16; u16 last_sch; - u32 reserved3; + u32:32; struct chsc_header response; - u32 reserved4; - u8 flags; - u8 reserved5; - u16 sch; - u8 qfmt; - u8 parm; - u8 qdioac1; - u8 sch_class; - u8 pct; - u8 icnt; - u8 reserved7; - u8 ocnt; - u8 reserved8; - u8 mbccnt; - u16 qdioac2; - u64 sch_token; -}; + u32:32; + struct qdio_ssqd_desc qdio_ssqd; +} __attribute__ ((packed)); -struct qdio_perf_stats { -#ifdef CONFIG_64BIT - atomic64_t tl_runs; - atomic64_t outbound_tl_runs; - atomic64_t outbound_tl_runs_resched; - atomic64_t inbound_tl_runs; - atomic64_t inbound_tl_runs_resched; - atomic64_t inbound_thin_tl_runs; - atomic64_t inbound_thin_tl_runs_resched; - - atomic64_t siga_outs; - atomic64_t siga_ins; - atomic64_t siga_syncs; - atomic64_t pcis; - atomic64_t thinints; - atomic64_t fast_reqs; - - atomic64_t outbound_cnt; - atomic64_t inbound_cnt; -#else /* CONFIG_64BIT */ - atomic_t tl_runs; - atomic_t outbound_tl_runs; - atomic_t outbound_tl_runs_resched; - atomic_t inbound_tl_runs; - atomic_t inbound_tl_runs_resched; - atomic_t inbound_thin_tl_runs; - atomic_t inbound_thin_tl_runs_resched; - - atomic_t siga_outs; - atomic_t siga_ins; - atomic_t siga_syncs; - atomic_t pcis; - atomic_t thinints; - atomic_t fast_reqs; - - atomic_t outbound_cnt; - atomic_t inbound_cnt; -#endif /* CONFIG_64BIT */ +struct scssc_area { + struct chsc_header request; + u16 operation_code; + u16:16; + u32:32; + u32:32; + u64 summary_indicator_addr; + u64 subchannel_indicator_addr; + u32 ks:4; + u32 kc:4; + u32:21; + u32 isc:3; + u32 word_with_d_bit; + u32:32; + struct subchannel_id schid; + u32 reserved[1004]; + struct chsc_header response; + u32:32; +} __attribute__ ((packed)); + +struct qdio_input_q { + /* input buffer acknowledgement flag */ + int polling; + + /* last time of noticing incoming data */ + u64 timestamp; + + /* lock for clearing the acknowledgement */ + spinlock_t lock; }; -/* unlikely as the later the better */ -#define SYNC_MEMORY if (unlikely(q->siga_sync)) qdio_siga_sync_q(q) -#define SYNC_MEMORY_ALL if (unlikely(q->siga_sync)) \ - qdio_siga_sync(q,~0U,~0U) -#define SYNC_MEMORY_ALL_OUTB if (unlikely(q->siga_sync)) \ - qdio_siga_sync(q,~0U,0) +struct qdio_output_q { + /* failed siga-w attempts*/ + atomic_t busy_siga_counter; -#define NOW qdio_get_micros() -#define SAVE_TIMESTAMP(q) q->timing.last_transfer_time=NOW -#define GET_SAVED_TIMESTAMP(q) (q->timing.last_transfer_time) -#define SAVE_FRONTIER(q,val) q->last_move_ftc=val -#define GET_SAVED_FRONTIER(q) (q->last_move_ftc) + /* start time of busy condition */ + u64 timestamp; -#define MY_MODULE_STRING(x) #x + /* PCIs are enabled for the queue */ + int pci_out_enabled; -#ifdef CONFIG_64BIT -#define QDIO_GET_ADDR(x) ((__u32)(unsigned long)x) -#else /* CONFIG_64BIT */ -#define QDIO_GET_ADDR(x) ((__u32)(long)x) -#endif /* CONFIG_64BIT */ + /* timer to check for more outbound work */ + struct timer_list timer; +}; struct qdio_q { - volatile struct slsb slsb; + struct slsb slsb; + union { + struct qdio_input_q in; + struct qdio_output_q out; + } u; - char unused[QDIO_MAX_BUFFERS_PER_Q]; + /* queue number */ + int nr; - __u32 * dev_st_chg_ind; + /* bitmask of queue number */ + int mask; + /* input or output queue */ int is_input_q; - struct subchannel_id schid; - struct ccw_device *cdev; - - unsigned int is_iqdio_q; - unsigned int is_thinint_q; - /* bit 0 means queue 0, bit 1 means queue 1, ... */ - unsigned int mask; - unsigned int q_no; + /* list of thinint input queues */ + struct list_head entry; + /* upper-layer program handler */ qdio_handler_t (*handler); - /* points to the next buffer to be checked for having - * been processed by the card (outbound) - * or to the next buffer the program should check for (inbound) */ - volatile int first_to_check; - /* and the last time it was: */ - volatile int last_move_ftc; + /* + * inbound: next buffer the program should check for + * outbound: next buffer to check for having been processed + * by the card + */ + int first_to_check; - atomic_t number_of_buffers_used; - atomic_t polling; + /* first_to_check of the last time */ + int last_move_ftc; - unsigned int siga_in; - unsigned int siga_out; - unsigned int siga_sync; - unsigned int siga_sync_done_on_thinints; - unsigned int siga_sync_done_on_outb_tis; - unsigned int hydra_gives_outbound_pcis; + /* beginning position for calling the program */ + int first_to_kick; - /* used to save beginning position when calling dd_handlers */ - int first_element_to_kick; + /* number of buffers in use by the adapter */ + atomic_t nr_buf_used; - atomic_t use_count; - atomic_t is_in_shutdown; - - void *irq_ptr; - - struct timer_list timer; -#ifdef QDIO_USE_TIMERS_FOR_POLLING - atomic_t timer_already_set; - spinlock_t timer_lock; -#else /* QDIO_USE_TIMERS_FOR_POLLING */ + struct qdio_irq *irq_ptr; struct tasklet_struct tasklet; -#endif /* QDIO_USE_TIMERS_FOR_POLLING */ - - enum qdio_irq_states state; - - /* used to store the error condition during a data transfer */ + /* error condition during a data transfer */ unsigned int qdio_error; - unsigned int siga_error; - unsigned int error_status_flags; - - /* list of interesting queues */ - volatile struct qdio_q *list_next; - volatile struct qdio_q *list_prev; struct sl *sl; - volatile struct sbal *sbal[QDIO_MAX_BUFFERS_PER_Q]; - - struct qdio_buffer *qdio_buffers[QDIO_MAX_BUFFERS_PER_Q]; - - unsigned long int_parm; - - /*struct { - int in_bh_check_limit; - int threshold; - } threshold_classes[QDIO_STATS_CLASSES];*/ - - struct { - /* inbound: the time to stop polling - outbound: the time to kick peer */ - int threshold; /* the real value */ - - /* outbound: last time of do_QDIO - inbound: last time of noticing incoming data */ - /*__u64 last_transfer_times[QDIO_STATS_NUMBER]; - int last_transfer_index; */ - - __u64 last_transfer_time; - __u64 busy_start; - } timing; - atomic_t busy_siga_counter; - unsigned int queue_type; - unsigned int is_pci_out; - - /* leave this member at the end. won't be cleared in qdio_fill_qs */ - struct slib *slib; /* a page is allocated under this pointer, - sl points into this page, offset PAGE_SIZE/2 - (after slib) */ + struct qdio_buffer *sbal[QDIO_MAX_BUFFERS_PER_Q]; + + /* + * Warning: Leave this member at the end so it won't be cleared in + * qdio_fill_qs. A page is allocated under this pointer and used for + * slib and sl. slib is 2048 bytes big and sl points to offset + * PAGE_SIZE / 2. + */ + struct slib *slib; } __attribute__ ((aligned(256))); struct qdio_irq { - __u32 * volatile dev_st_chg_ind; + struct qib qib; + u32 *dsci; /* address of device state change indicator */ + struct ccw_device *cdev; unsigned long int_parm; struct subchannel_id schid; - - unsigned int is_iqdio_irq; - unsigned int is_thinint_irq; - unsigned int hydra_gives_outbound_pcis; - unsigned int sync_done_on_outb_pcis; - - /* QEBSM facility */ - unsigned int is_qebsm; - unsigned long sch_token; + unsigned long sch_token; /* QEBSM facility */ enum qdio_irq_states state; - unsigned int no_input_qs; - unsigned int no_output_qs; + struct siga_flag siga_flag; /* siga sync information from qdioac */ - unsigned char qdioac; + int nr_input_qs; + int nr_output_qs; struct ccw1 ccw; - struct ciw equeue; struct ciw aqueue; - struct qib qib; - - void (*original_int_handler) (struct ccw_device *, - unsigned long, struct irb *); + struct qdio_ssqd_desc ssqd_desc; + + void (*orig_handler) (struct ccw_device *, unsigned long, struct irb *); - /* leave these four members together at the end. won't be cleared in qdio_fill_irq */ + /* + * Warning: Leave these members together at the end so they won't be + * cleared in qdio_setup_irq. + */ struct qdr *qdr; + unsigned long chsc_page; + struct qdio_q *input_qs[QDIO_MAX_QUEUES_PER_IRQ]; struct qdio_q *output_qs[QDIO_MAX_QUEUES_PER_IRQ]; - struct semaphore setting_up_sema; + + struct mutex setup_mutex; }; -#endif + +/* helper functions */ +#define queue_type(q) q->irq_ptr->qib.qfmt + +#define is_thinint_irq(irq) \ + (irq->qib.qfmt == QDIO_IQDIO_QFMT || \ + css_general_characteristics.aif_osa) + +/* the highest iqdio queue is used for multicast */ +static inline int multicast_outbound(struct qdio_q *q) +{ + return (q->irq_ptr->nr_output_qs > 1) && + (q->nr == q->irq_ptr->nr_output_qs - 1); +} + +static inline unsigned long long get_usecs(void) +{ + return monotonic_clock() >> 12; +} + +#define pci_out_supported(q) \ + (q->irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED) +#define is_qebsm(q) (q->irq_ptr->sch_token != 0) + +#define need_siga_sync_thinint(q) (!q->irq_ptr->siga_flag.no_sync_ti) +#define need_siga_sync_out_thinint(q) (!q->irq_ptr->siga_flag.no_sync_out_ti) +#define need_siga_in(q) (q->irq_ptr->siga_flag.input) +#define need_siga_out(q) (q->irq_ptr->siga_flag.output) +#define need_siga_sync(q) (q->irq_ptr->siga_flag.sync) +#define siga_syncs_out_pci(q) (q->irq_ptr->siga_flag.no_sync_out_pci) + +#define for_each_input_queue(irq_ptr, q, i) \ + for (i = 0, q = irq_ptr->input_qs[0]; \ + i < irq_ptr->nr_input_qs; \ + q = irq_ptr->input_qs[++i]) +#define for_each_output_queue(irq_ptr, q, i) \ + for (i = 0, q = irq_ptr->output_qs[0]; \ + i < irq_ptr->nr_output_qs; \ + q = irq_ptr->output_qs[++i]) + +#define prev_buf(bufnr) \ + ((bufnr + QDIO_MAX_BUFFERS_MASK) & QDIO_MAX_BUFFERS_MASK) +#define next_buf(bufnr) \ + ((bufnr + 1) & QDIO_MAX_BUFFERS_MASK) +#define add_buf(bufnr, inc) \ + ((bufnr + inc) & QDIO_MAX_BUFFERS_MASK) + +/* prototypes for thin interrupt */ +void qdio_sync_after_thinint(struct qdio_q *q); +int get_buf_state(struct qdio_q *q, unsigned int bufnr, unsigned char *state); +void qdio_check_outbound_after_thinint(struct qdio_q *q); +int qdio_inbound_q_moved(struct qdio_q *q); +void qdio_kick_inbound_handler(struct qdio_q *q); +void qdio_stop_polling(struct qdio_q *q); +int qdio_siga_sync_q(struct qdio_q *q); + +void qdio_setup_thinint(struct qdio_irq *irq_ptr); +int qdio_establish_thinint(struct qdio_irq *irq_ptr); +void qdio_shutdown_thinint(struct qdio_irq *irq_ptr); +void tiqdio_add_input_queues(struct qdio_irq *irq_ptr); +void tiqdio_remove_input_queues(struct qdio_irq *irq_ptr); +void tiqdio_inbound_processing(unsigned long q); +int tiqdio_allocate_memory(void); +void tiqdio_free_memory(void); +int tiqdio_register_thinints(void); +void tiqdio_unregister_thinints(void); + +/* prototypes for setup */ +void qdio_inbound_processing(unsigned long data); +void qdio_outbound_processing(unsigned long data); +void qdio_outbound_timer(unsigned long data); +void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, + struct irb *irb); +int qdio_allocate_qs(struct qdio_irq *irq_ptr, int nr_input_qs, + int nr_output_qs); +void qdio_setup_ssqd_info(struct qdio_irq *irq_ptr); +int qdio_setup_irq(struct qdio_initialize *init_data); +void qdio_print_subchannel_info(struct qdio_irq *irq_ptr, + struct ccw_device *cdev); +void qdio_release_memory(struct qdio_irq *irq_ptr); +int qdio_setup_init(void); +void qdio_setup_exit(void); + +#endif /* _CIO_QDIO_H */ diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c new file mode 100644 index 000000000000..337aa3087a78 --- /dev/null +++ b/drivers/s390/cio/qdio_debug.c @@ -0,0 +1,240 @@ +/* + * drivers/s390/cio/qdio_debug.c + * + * Copyright IBM Corp. 2008 + * + * Author: Jan Glauber (jang@linux.vnet.ibm.com) + */ +#include +#include +#include +#include +#include +#include "qdio_debug.h" +#include "qdio.h" + +debug_info_t *qdio_dbf_setup; +debug_info_t *qdio_dbf_trace; + +static struct dentry *debugfs_root; +#define MAX_DEBUGFS_QUEUES 32 +static struct dentry *debugfs_queues[MAX_DEBUGFS_QUEUES] = { NULL }; +static DEFINE_MUTEX(debugfs_mutex); + +void qdio_allocate_do_dbf(struct qdio_initialize *init_data) +{ + char dbf_text[20]; + + sprintf(dbf_text, "qfmt:%x", init_data->q_format); + QDIO_DBF_TEXT0(0, setup, dbf_text); + QDIO_DBF_HEX0(0, setup, init_data->adapter_name, 8); + sprintf(dbf_text, "qpff%4x", init_data->qib_param_field_format); + QDIO_DBF_TEXT0(0, setup, dbf_text); + QDIO_DBF_HEX0(0, setup, &init_data->qib_param_field, sizeof(void *)); + QDIO_DBF_HEX0(0, setup, &init_data->input_slib_elements, sizeof(void *)); + QDIO_DBF_HEX0(0, setup, &init_data->output_slib_elements, sizeof(void *)); + sprintf(dbf_text, "niq:%4x", init_data->no_input_qs); + QDIO_DBF_TEXT0(0, setup, dbf_text); + sprintf(dbf_text, "noq:%4x", init_data->no_output_qs); + QDIO_DBF_TEXT0(0, setup, dbf_text); + QDIO_DBF_HEX0(0, setup, &init_data->input_handler, sizeof(void *)); + QDIO_DBF_HEX0(0, setup, &init_data->output_handler, sizeof(void *)); + QDIO_DBF_HEX0(0, setup, &init_data->int_parm, sizeof(long)); + QDIO_DBF_HEX0(0, setup, &init_data->flags, sizeof(long)); + QDIO_DBF_HEX0(0, setup, &init_data->input_sbal_addr_array, sizeof(void *)); + QDIO_DBF_HEX0(0, setup, &init_data->output_sbal_addr_array, sizeof(void *)); +} + +static void qdio_unregister_dbf_views(void) +{ + if (qdio_dbf_setup) + debug_unregister(qdio_dbf_setup); + if (qdio_dbf_trace) + debug_unregister(qdio_dbf_trace); +} + +static int qdio_register_dbf_views(void) +{ + qdio_dbf_setup = debug_register("qdio_setup", QDIO_DBF_SETUP_PAGES, + QDIO_DBF_SETUP_NR_AREAS, + QDIO_DBF_SETUP_LEN); + if (!qdio_dbf_setup) + goto oom; + debug_register_view(qdio_dbf_setup, &debug_hex_ascii_view); + debug_set_level(qdio_dbf_setup, QDIO_DBF_SETUP_LEVEL); + + qdio_dbf_trace = debug_register("qdio_trace", QDIO_DBF_TRACE_PAGES, + QDIO_DBF_TRACE_NR_AREAS, + QDIO_DBF_TRACE_LEN); + if (!qdio_dbf_trace) + goto oom; + debug_register_view(qdio_dbf_trace, &debug_hex_ascii_view); + debug_set_level(qdio_dbf_trace, QDIO_DBF_TRACE_LEVEL); + return 0; +oom: + qdio_unregister_dbf_views(); + return -ENOMEM; +} + +static int qstat_show(struct seq_file *m, void *v) +{ + unsigned char state; + struct qdio_q *q = m->private; + int i; + + if (!q) + return 0; + + seq_printf(m, "device state indicator: %d\n", *q->irq_ptr->dsci); + seq_printf(m, "nr_used: %d\n", atomic_read(&q->nr_buf_used)); + seq_printf(m, "ftc: %d\n", q->first_to_check); + seq_printf(m, "last_move_ftc: %d\n", q->last_move_ftc); + seq_printf(m, "polling: %d\n", q->u.in.polling); + seq_printf(m, "slsb buffer states:\n"); + + qdio_siga_sync_q(q); + for (i = 0; i < QDIO_MAX_BUFFERS_PER_Q; i++) { + get_buf_state(q, i, &state); + switch (state) { + case SLSB_P_INPUT_NOT_INIT: + case SLSB_P_OUTPUT_NOT_INIT: + seq_printf(m, "N"); + break; + case SLSB_P_INPUT_PRIMED: + case SLSB_CU_OUTPUT_PRIMED: + seq_printf(m, "+"); + break; + case SLSB_P_INPUT_ACK: + seq_printf(m, "A"); + break; + case SLSB_P_INPUT_ERROR: + case SLSB_P_OUTPUT_ERROR: + seq_printf(m, "x"); + break; + case SLSB_CU_INPUT_EMPTY: + case SLSB_P_OUTPUT_EMPTY: + seq_printf(m, "-"); + break; + case SLSB_P_INPUT_HALTED: + case SLSB_P_OUTPUT_HALTED: + seq_printf(m, "."); + break; + default: + seq_printf(m, "?"); + } + if (i == 63) + seq_printf(m, "\n"); + } + seq_printf(m, "\n"); + return 0; +} + +static ssize_t qstat_seq_write(struct file *file, const char __user *buf, + size_t count, loff_t *off) +{ + struct seq_file *seq = file->private_data; + struct qdio_q *q = seq->private; + + if (!q) + return 0; + + if (q->is_input_q) + xchg(q->irq_ptr->dsci, 1); + local_bh_disable(); + tasklet_schedule(&q->tasklet); + local_bh_enable(); + return count; +} + +static int qstat_seq_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, qstat_show, + filp->f_path.dentry->d_inode->i_private); +} + +static void get_queue_name(struct qdio_q *q, struct ccw_device *cdev, char *name) +{ + memset(name, 0, sizeof(name)); + sprintf(name, "%s", cdev->dev.bus_id); + if (q->is_input_q) + sprintf(name + strlen(name), "_input"); + else + sprintf(name + strlen(name), "_output"); + sprintf(name + strlen(name), "_%d", q->nr); +} + +static void remove_debugfs_entry(struct qdio_q *q) +{ + int i; + + for (i = 0; i < MAX_DEBUGFS_QUEUES; i++) { + if (!debugfs_queues[i]) + continue; + if (debugfs_queues[i]->d_inode->i_private == q) { + debugfs_remove(debugfs_queues[i]); + debugfs_queues[i] = NULL; + } + } +} + +static struct file_operations debugfs_fops = { + .owner = THIS_MODULE, + .open = qstat_seq_open, + .read = seq_read, + .write = qstat_seq_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static void setup_debugfs_entry(struct qdio_q *q, struct ccw_device *cdev) +{ + int i = 0; + char name[40]; + + while (debugfs_queues[i] != NULL) { + i++; + if (i >= MAX_DEBUGFS_QUEUES) + return; + } + get_queue_name(q, cdev, name); + debugfs_queues[i] = debugfs_create_file(name, S_IFREG | S_IRUGO | S_IWUSR, + debugfs_root, q, &debugfs_fops); +} + +void qdio_setup_debug_entries(struct qdio_irq *irq_ptr, struct ccw_device *cdev) +{ + struct qdio_q *q; + int i; + + mutex_lock(&debugfs_mutex); + for_each_input_queue(irq_ptr, q, i) + setup_debugfs_entry(q, cdev); + for_each_output_queue(irq_ptr, q, i) + setup_debugfs_entry(q, cdev); + mutex_unlock(&debugfs_mutex); +} + +void qdio_shutdown_debug_entries(struct qdio_irq *irq_ptr, struct ccw_device *cdev) +{ + struct qdio_q *q; + int i; + + mutex_lock(&debugfs_mutex); + for_each_input_queue(irq_ptr, q, i) + remove_debugfs_entry(q); + for_each_output_queue(irq_ptr, q, i) + remove_debugfs_entry(q); + mutex_unlock(&debugfs_mutex); +} + +int __init qdio_debug_init(void) +{ + debugfs_root = debugfs_create_dir("qdio_queues", NULL); + return qdio_register_dbf_views(); +} + +void qdio_debug_exit(void) +{ + debugfs_remove(debugfs_root); + qdio_unregister_dbf_views(); +} diff --git a/drivers/s390/cio/qdio_debug.h b/drivers/s390/cio/qdio_debug.h new file mode 100644 index 000000000000..8484b83698e1 --- /dev/null +++ b/drivers/s390/cio/qdio_debug.h @@ -0,0 +1,91 @@ +/* + * drivers/s390/cio/qdio_debug.h + * + * Copyright IBM Corp. 2008 + * + * Author: Jan Glauber (jang@linux.vnet.ibm.com) + */ +#ifndef QDIO_DEBUG_H +#define QDIO_DEBUG_H + +#include +#include +#include "qdio.h" + +#define QDIO_DBF_HEX(ex, name, level, addr, len) \ + do { \ + if (ex) \ + debug_exception(qdio_dbf_##name, level, (void *)(addr), len); \ + else \ + debug_event(qdio_dbf_##name, level, (void *)(addr), len); \ + } while (0) +#define QDIO_DBF_TEXT(ex, name, level, text) \ + do { \ + if (ex) \ + debug_text_exception(qdio_dbf_##name, level, text); \ + else \ + debug_text_event(qdio_dbf_##name, level, text); \ + } while (0) + +#define QDIO_DBF_HEX0(ex, name, addr, len) QDIO_DBF_HEX(ex, name, 0, addr, len) +#define QDIO_DBF_HEX1(ex, name, addr, len) QDIO_DBF_HEX(ex, name, 1, addr, len) +#define QDIO_DBF_HEX2(ex, name, addr, len) QDIO_DBF_HEX(ex, name, 2, addr, len) + +#ifdef CONFIG_QDIO_DEBUG +#define QDIO_DBF_HEX3(ex, name, addr, len) QDIO_DBF_HEX(ex, name, 3, addr, len) +#define QDIO_DBF_HEX4(ex, name, addr, len) QDIO_DBF_HEX(ex, name, 4, addr, len) +#define QDIO_DBF_HEX5(ex, name, addr, len) QDIO_DBF_HEX(ex, name, 5, addr, len) +#define QDIO_DBF_HEX6(ex, name, addr, len) QDIO_DBF_HEX(ex, name, 6, addr, len) +#else +#define QDIO_DBF_HEX3(ex, name, addr, len) do {} while (0) +#define QDIO_DBF_HEX4(ex, name, addr, len) do {} while (0) +#define QDIO_DBF_HEX5(ex, name, addr, len) do {} while (0) +#define QDIO_DBF_HEX6(ex, name, addr, len) do {} while (0) +#endif /* CONFIG_QDIO_DEBUG */ + +#define QDIO_DBF_TEXT0(ex, name, text) QDIO_DBF_TEXT(ex, name, 0, text) +#define QDIO_DBF_TEXT1(ex, name, text) QDIO_DBF_TEXT(ex, name, 1, text) +#define QDIO_DBF_TEXT2(ex, name, text) QDIO_DBF_TEXT(ex, name, 2, text) + +#ifdef CONFIG_QDIO_DEBUG +#define QDIO_DBF_TEXT3(ex, name, text) QDIO_DBF_TEXT(ex, name, 3, text) +#define QDIO_DBF_TEXT4(ex, name, text) QDIO_DBF_TEXT(ex, name, 4, text) +#define QDIO_DBF_TEXT5(ex, name, text) QDIO_DBF_TEXT(ex, name, 5, text) +#define QDIO_DBF_TEXT6(ex, name, text) QDIO_DBF_TEXT(ex, name, 6, text) +#else +#define QDIO_DBF_TEXT3(ex, name, text) do {} while (0) +#define QDIO_DBF_TEXT4(ex, name, text) do {} while (0) +#define QDIO_DBF_TEXT5(ex, name, text) do {} while (0) +#define QDIO_DBF_TEXT6(ex, name, text) do {} while (0) +#endif /* CONFIG_QDIO_DEBUG */ + +/* s390dbf views */ +#define QDIO_DBF_SETUP_LEN 8 +#define QDIO_DBF_SETUP_PAGES 4 +#define QDIO_DBF_SETUP_NR_AREAS 1 + +#define QDIO_DBF_TRACE_LEN 8 +#define QDIO_DBF_TRACE_NR_AREAS 2 + +#ifdef CONFIG_QDIO_DEBUG +#define QDIO_DBF_TRACE_PAGES 16 +#define QDIO_DBF_SETUP_LEVEL 6 +#define QDIO_DBF_TRACE_LEVEL 4 +#else /* !CONFIG_QDIO_DEBUG */ +#define QDIO_DBF_TRACE_PAGES 4 +#define QDIO_DBF_SETUP_LEVEL 2 +#define QDIO_DBF_TRACE_LEVEL 2 +#endif /* CONFIG_QDIO_DEBUG */ + +extern debug_info_t *qdio_dbf_setup; +extern debug_info_t *qdio_dbf_trace; + +void qdio_allocate_do_dbf(struct qdio_initialize *init_data); +void debug_print_bstat(struct qdio_q *q); +void qdio_setup_debug_entries(struct qdio_irq *irq_ptr, + struct ccw_device *cdev); +void qdio_shutdown_debug_entries(struct qdio_irq *irq_ptr, + struct ccw_device *cdev); +int qdio_debug_init(void); +void qdio_debug_exit(void); +#endif diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c new file mode 100644 index 000000000000..d10c73cc1688 --- /dev/null +++ b/drivers/s390/cio/qdio_main.c @@ -0,0 +1,1755 @@ +/* + * linux/drivers/s390/cio/qdio_main.c + * + * Linux for s390 qdio support, buffer handling, qdio API and module support. + * + * Copyright 2000,2008 IBM Corp. + * Author(s): Utz Bacher + * Jan Glauber + * 2.6 cio integration by Cornelia Huck + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cio.h" +#include "css.h" +#include "device.h" +#include "qdio.h" +#include "qdio_debug.h" +#include "qdio_perf.h" + +MODULE_AUTHOR("Utz Bacher ,"\ + "Jan Glauber "); +MODULE_DESCRIPTION("QDIO base support"); +MODULE_LICENSE("GPL"); + +static inline int do_siga_sync(struct subchannel_id schid, + unsigned int out_mask, unsigned int in_mask) +{ + register unsigned long __fc asm ("0") = 2; + register struct subchannel_id __schid asm ("1") = schid; + register unsigned long out asm ("2") = out_mask; + register unsigned long in asm ("3") = in_mask; + int cc; + + asm volatile( + " siga 0\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (cc) + : "d" (__fc), "d" (__schid), "d" (out), "d" (in) : "cc"); + return cc; +} + +static inline int do_siga_input(struct subchannel_id schid, unsigned int mask) +{ + register unsigned long __fc asm ("0") = 1; + register struct subchannel_id __schid asm ("1") = schid; + register unsigned long __mask asm ("2") = mask; + int cc; + + asm volatile( + " siga 0\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (cc) + : "d" (__fc), "d" (__schid), "d" (__mask) : "cc", "memory"); + return cc; +} + +/** + * do_siga_output - perform SIGA-w/wt function + * @schid: subchannel id or in case of QEBSM the subchannel token + * @mask: which output queues to process + * @bb: busy bit indicator, set only if SIGA-w/wt could not access a buffer + * @fc: function code to perform + * + * Returns cc or QDIO_ERROR_SIGA_ACCESS_EXCEPTION. + * Note: For IQDC unicast queues only the highest priority queue is processed. + */ +static inline int do_siga_output(unsigned long schid, unsigned long mask, + u32 *bb, unsigned int fc) +{ + register unsigned long __fc asm("0") = fc; + register unsigned long __schid asm("1") = schid; + register unsigned long __mask asm("2") = mask; + int cc = QDIO_ERROR_SIGA_ACCESS_EXCEPTION; + + asm volatile( + " siga 0\n" + "0: ipm %0\n" + " srl %0,28\n" + "1:\n" + EX_TABLE(0b, 1b) + : "+d" (cc), "+d" (__fc), "+d" (__schid), "+d" (__mask) + : : "cc", "memory"); + *bb = ((unsigned int) __fc) >> 31; + return cc; +} + +static inline int qdio_check_ccq(struct qdio_q *q, unsigned int ccq) +{ + char dbf_text[15]; + + /* all done or next buffer state different */ + if (ccq == 0 || ccq == 32) + return 0; + /* not all buffers processed */ + if (ccq == 96 || ccq == 97) + return 1; + /* notify devices immediately */ + sprintf(dbf_text, "%d", ccq); + QDIO_DBF_TEXT2(1, trace, dbf_text); + return -EIO; +} + +/** + * qdio_do_eqbs - extract buffer states for QEBSM + * @q: queue to manipulate + * @state: state of the extracted buffers + * @start: buffer number to start at + * @count: count of buffers to examine + * + * Returns the number of successfull extracted equal buffer states. + * Stops processing if a state is different from the last buffers state. + */ +static int qdio_do_eqbs(struct qdio_q *q, unsigned char *state, + int start, int count) +{ + unsigned int ccq = 0; + int tmp_count = count, tmp_start = start; + int nr = q->nr; + int rc; + char dbf_text[15]; + + BUG_ON(!q->irq_ptr->sch_token); + + if (!q->is_input_q) + nr += q->irq_ptr->nr_input_qs; +again: + ccq = do_eqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count); + rc = qdio_check_ccq(q, ccq); + + /* At least one buffer was processed, return and extract the remaining + * buffers later. + */ + if ((ccq == 96) && (count != tmp_count)) + return (count - tmp_count); + if (rc == 1) { + QDIO_DBF_TEXT5(1, trace, "eqAGAIN"); + goto again; + } + + if (rc < 0) { + QDIO_DBF_TEXT2(1, trace, "eqberr"); + sprintf(dbf_text, "%2x,%2x,%d,%d", count, tmp_count, ccq, nr); + QDIO_DBF_TEXT2(1, trace, dbf_text); + q->handler(q->irq_ptr->cdev, + QDIO_ERROR_ACTIVATE_CHECK_CONDITION, + 0, -1, -1, q->irq_ptr->int_parm); + return 0; + } + return count - tmp_count; +} + +/** + * qdio_do_sqbs - set buffer states for QEBSM + * @q: queue to manipulate + * @state: new state of the buffers + * @start: first buffer number to change + * @count: how many buffers to change + * + * Returns the number of successfully changed buffers. + * Does retrying until the specified count of buffer states is set or an + * error occurs. + */ +static int qdio_do_sqbs(struct qdio_q *q, unsigned char state, int start, + int count) +{ + unsigned int ccq = 0; + int tmp_count = count, tmp_start = start; + int nr = q->nr; + int rc; + char dbf_text[15]; + + BUG_ON(!q->irq_ptr->sch_token); + + if (!q->is_input_q) + nr += q->irq_ptr->nr_input_qs; +again: + ccq = do_sqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count); + rc = qdio_check_ccq(q, ccq); + if (rc == 1) { + QDIO_DBF_TEXT5(1, trace, "sqAGAIN"); + goto again; + } + if (rc < 0) { + QDIO_DBF_TEXT3(1, trace, "sqberr"); + sprintf(dbf_text, "%2x,%2x", count, tmp_count); + QDIO_DBF_TEXT3(1, trace, dbf_text); + sprintf(dbf_text, "%d,%d", ccq, nr); + QDIO_DBF_TEXT3(1, trace, dbf_text); + + q->handler(q->irq_ptr->cdev, + QDIO_ERROR_ACTIVATE_CHECK_CONDITION, + 0, -1, -1, q->irq_ptr->int_parm); + return 0; + } + WARN_ON(tmp_count); + return count - tmp_count; +} + +/* returns number of examined buffers and their common state in *state */ +static inline int get_buf_states(struct qdio_q *q, unsigned int bufnr, + unsigned char *state, unsigned int count) +{ + unsigned char __state = 0; + int i; + + BUG_ON(bufnr > QDIO_MAX_BUFFERS_MASK); + BUG_ON(count > QDIO_MAX_BUFFERS_PER_Q); + + if (is_qebsm(q)) + return qdio_do_eqbs(q, state, bufnr, count); + + for (i = 0; i < count; i++) { + if (!__state) + __state = q->slsb.val[bufnr]; + else if (q->slsb.val[bufnr] != __state) + break; + bufnr = next_buf(bufnr); + } + *state = __state; + return i; +} + +inline int get_buf_state(struct qdio_q *q, unsigned int bufnr, + unsigned char *state) +{ + return get_buf_states(q, bufnr, state, 1); +} + +/* wrap-around safe setting of slsb states, returns number of changed buffers */ +static inline int set_buf_states(struct qdio_q *q, int bufnr, + unsigned char state, int count) +{ + int i; + + BUG_ON(bufnr > QDIO_MAX_BUFFERS_MASK); + BUG_ON(count > QDIO_MAX_BUFFERS_PER_Q); + + if (is_qebsm(q)) + return qdio_do_sqbs(q, state, bufnr, count); + + for (i = 0; i < count; i++) { + xchg(&q->slsb.val[bufnr], state); + bufnr = next_buf(bufnr); + } + return count; +} + +static inline int set_buf_state(struct qdio_q *q, int bufnr, + unsigned char state) +{ + return set_buf_states(q, bufnr, state, 1); +} + +/* set slsb states to initial state */ +void qdio_init_buf_states(struct qdio_irq *irq_ptr) +{ + struct qdio_q *q; + int i; + + for_each_input_queue(irq_ptr, q, i) + set_buf_states(q, 0, SLSB_P_INPUT_NOT_INIT, + QDIO_MAX_BUFFERS_PER_Q); + for_each_output_queue(irq_ptr, q, i) + set_buf_states(q, 0, SLSB_P_OUTPUT_NOT_INIT, + QDIO_MAX_BUFFERS_PER_Q); +} + +static int qdio_siga_sync(struct qdio_q *q, unsigned int output, + unsigned int input) +{ + int cc; + + if (!need_siga_sync(q)) + return 0; + + qdio_perf_stat_inc(&perf_stats.siga_sync); + + cc = do_siga_sync(q->irq_ptr->schid, output, input); + if (cc) { + QDIO_DBF_TEXT4(0, trace, "sigasync"); + QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); + QDIO_DBF_HEX3(0, trace, &cc, sizeof(int *)); + } + return cc; +} + +inline int qdio_siga_sync_q(struct qdio_q *q) +{ + if (q->is_input_q) + return qdio_siga_sync(q, 0, q->mask); + else + return qdio_siga_sync(q, q->mask, 0); +} + +static inline int qdio_siga_sync_out(struct qdio_q *q) +{ + return qdio_siga_sync(q, ~0U, 0); +} + +static inline int qdio_siga_sync_all(struct qdio_q *q) +{ + return qdio_siga_sync(q, ~0U, ~0U); +} + +static inline int qdio_do_siga_output(struct qdio_q *q, unsigned int *busy_bit) +{ + unsigned int fc = 0; + unsigned long schid; + + if (!is_qebsm(q)) + schid = *((u32 *)&q->irq_ptr->schid); + else { + schid = q->irq_ptr->sch_token; + fc |= 0x80; + } + return do_siga_output(schid, q->mask, busy_bit, fc); +} + +static int qdio_siga_output(struct qdio_q *q) +{ + int cc; + u32 busy_bit; + u64 start_time = 0; + + QDIO_DBF_TEXT5(0, trace, "sigaout"); + QDIO_DBF_HEX5(0, trace, &q, sizeof(void *)); + + qdio_perf_stat_inc(&perf_stats.siga_out); +again: + cc = qdio_do_siga_output(q, &busy_bit); + if (queue_type(q) == QDIO_IQDIO_QFMT && cc == 2 && busy_bit) { + if (!start_time) + start_time = get_usecs(); + else if ((get_usecs() - start_time) < QDIO_BUSY_BIT_PATIENCE) + goto again; + } + + if (cc == 2 && busy_bit) + cc |= QDIO_ERROR_SIGA_BUSY; + if (cc) + QDIO_DBF_HEX3(0, trace, &cc, sizeof(int *)); + return cc; +} + +static inline int qdio_siga_input(struct qdio_q *q) +{ + int cc; + + QDIO_DBF_TEXT4(0, trace, "sigain"); + QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); + + qdio_perf_stat_inc(&perf_stats.siga_in); + + cc = do_siga_input(q->irq_ptr->schid, q->mask); + if (cc) + QDIO_DBF_HEX3(0, trace, &cc, sizeof(int *)); + return cc; +} + +/* called from thinint inbound handler */ +void qdio_sync_after_thinint(struct qdio_q *q) +{ + if (pci_out_supported(q)) { + if (need_siga_sync_thinint(q)) + qdio_siga_sync_all(q); + else if (need_siga_sync_out_thinint(q)) + qdio_siga_sync_out(q); + } else + qdio_siga_sync_q(q); +} + +inline void qdio_stop_polling(struct qdio_q *q) +{ + spin_lock_bh(&q->u.in.lock); + if (!q->u.in.polling) { + spin_unlock_bh(&q->u.in.lock); + return; + } + q->u.in.polling = 0; + qdio_perf_stat_inc(&perf_stats.debug_stop_polling); + + /* show the card that we are not polling anymore */ + set_buf_state(q, q->last_move_ftc, SLSB_P_INPUT_NOT_INIT); + spin_unlock_bh(&q->u.in.lock); +} + +static void announce_buffer_error(struct qdio_q *q) +{ + char dbf_text[15]; + + if (q->is_input_q) + QDIO_DBF_TEXT3(1, trace, "inperr"); + else + QDIO_DBF_TEXT3(0, trace, "outperr"); + + sprintf(dbf_text, "%x-%x-%x", q->first_to_check, + q->sbal[q->first_to_check]->element[14].flags, + q->sbal[q->first_to_check]->element[15].flags); + QDIO_DBF_TEXT3(1, trace, dbf_text); + QDIO_DBF_HEX2(1, trace, q->sbal[q->first_to_check], 256); + + q->qdio_error = QDIO_ERROR_SLSB_STATE; +} + +static int get_inbound_buffer_frontier(struct qdio_q *q) +{ + int count, stop; + unsigned char state; + + /* + * If we still poll don't update last_move_ftc, keep the + * previously ACK buffer there. + */ + if (!q->u.in.polling) + q->last_move_ftc = q->first_to_check; + + /* + * Don't check 128 buffers, as otherwise qdio_inbound_q_moved + * would return 0. + */ + count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK); + stop = add_buf(q->first_to_check, count); + + /* + * No siga sync here, as a PCI or we after a thin interrupt + * will sync the queues. + */ + + /* need to set count to 1 for non-qebsm */ + if (!is_qebsm(q)) + count = 1; + +check_next: + if (q->first_to_check == stop) + goto out; + + count = get_buf_states(q, q->first_to_check, &state, count); + if (!count) + goto out; + + switch (state) { + case SLSB_P_INPUT_PRIMED: + QDIO_DBF_TEXT5(0, trace, "inptprim"); + + /* + * Only ACK the first buffer. The ACK will be removed in + * qdio_stop_polling. + */ + if (q->u.in.polling) + state = SLSB_P_INPUT_NOT_INIT; + else { + q->u.in.polling = 1; + state = SLSB_P_INPUT_ACK; + } + set_buf_state(q, q->first_to_check, state); + + /* + * Need to change all PRIMED buffers to NOT_INIT, otherwise + * we're loosing initiative in the thinint code. + */ + if (count > 1) + set_buf_states(q, next_buf(q->first_to_check), + SLSB_P_INPUT_NOT_INIT, count - 1); + + /* + * No siga-sync needed for non-qebsm here, as the inbound queue + * will be synced on the next siga-r, resp. + * tiqdio_is_inbound_q_done will do the siga-sync. + */ + q->first_to_check = add_buf(q->first_to_check, count); + atomic_sub(count, &q->nr_buf_used); + goto check_next; + case SLSB_P_INPUT_ERROR: + announce_buffer_error(q); + /* process the buffer, the upper layer will take care of it */ + q->first_to_check = add_buf(q->first_to_check, count); + atomic_sub(count, &q->nr_buf_used); + break; + case SLSB_CU_INPUT_EMPTY: + case SLSB_P_INPUT_NOT_INIT: + case SLSB_P_INPUT_ACK: + QDIO_DBF_TEXT5(0, trace, "inpnipro"); + break; + default: + BUG(); + } +out: + QDIO_DBF_HEX4(0, trace, &q->first_to_check, sizeof(int)); + return q->first_to_check; +} + +int qdio_inbound_q_moved(struct qdio_q *q) +{ + int bufnr; + + bufnr = get_inbound_buffer_frontier(q); + + if ((bufnr != q->last_move_ftc) || q->qdio_error) { + if (!need_siga_sync(q) && !pci_out_supported(q)) + q->u.in.timestamp = get_usecs(); + + QDIO_DBF_TEXT4(0, trace, "inhasmvd"); + QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); + return 1; + } else + return 0; +} + +static int qdio_inbound_q_done(struct qdio_q *q) +{ + unsigned char state; +#ifdef CONFIG_QDIO_DEBUG + char dbf_text[15]; +#endif + + if (!atomic_read(&q->nr_buf_used)) + return 1; + + /* + * We need that one for synchronization with the adapter, as it + * does a kind of PCI avoidance. + */ + qdio_siga_sync_q(q); + + get_buf_state(q, q->first_to_check, &state); + if (state == SLSB_P_INPUT_PRIMED) + /* we got something to do */ + return 0; + + /* on VM, we don't poll, so the q is always done here */ + if (need_siga_sync(q) || pci_out_supported(q)) + return 1; + + /* + * At this point we know, that inbound first_to_check + * has (probably) not moved (see qdio_inbound_processing). + */ + if (get_usecs() > q->u.in.timestamp + QDIO_INPUT_THRESHOLD) { +#ifdef CONFIG_QDIO_DEBUG + QDIO_DBF_TEXT4(0, trace, "inqisdon"); + QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); + sprintf(dbf_text, "pf%02x", q->first_to_check); + QDIO_DBF_TEXT4(0, trace, dbf_text); +#endif /* CONFIG_QDIO_DEBUG */ + return 1; + } else { +#ifdef CONFIG_QDIO_DEBUG + QDIO_DBF_TEXT4(0, trace, "inqisntd"); + QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); + sprintf(dbf_text, "pf%02x", q->first_to_check); + QDIO_DBF_TEXT4(0, trace, dbf_text); +#endif /* CONFIG_QDIO_DEBUG */ + return 0; + } +} + +void qdio_kick_inbound_handler(struct qdio_q *q) +{ + int count, start, end; +#ifdef CONFIG_QDIO_DEBUG + char dbf_text[15]; +#endif + + qdio_perf_stat_inc(&perf_stats.inbound_handler); + + start = q->first_to_kick; + end = q->first_to_check; + if (end >= start) + count = end - start; + else + count = end + QDIO_MAX_BUFFERS_PER_Q - start; + +#ifdef CONFIG_QDIO_DEBUG + sprintf(dbf_text, "s=%2xc=%2x", start, count); + QDIO_DBF_TEXT4(0, trace, dbf_text); +#endif /* CONFIG_QDIO_DEBUG */ + + if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)) + return; + + q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, + start, count, q->irq_ptr->int_parm); + + /* for the next time */ + q->first_to_kick = q->first_to_check; + q->qdio_error = 0; +} + +static void __qdio_inbound_processing(struct qdio_q *q) +{ + qdio_perf_stat_inc(&perf_stats.tasklet_inbound); +again: + if (!qdio_inbound_q_moved(q)) + return; + + qdio_kick_inbound_handler(q); + + if (!qdio_inbound_q_done(q)) + /* means poll time is not yet over */ + goto again; + + qdio_stop_polling(q); + /* + * We need to check again to not lose initiative after + * resetting the ACK state. + */ + if (!qdio_inbound_q_done(q)) + goto again; +} + +/* inbound tasklet */ +void qdio_inbound_processing(unsigned long data) +{ + struct qdio_q *q = (struct qdio_q *)data; + __qdio_inbound_processing(q); +} + +static int get_outbound_buffer_frontier(struct qdio_q *q) +{ + int count, stop; + unsigned char state; + + if (((queue_type(q) != QDIO_IQDIO_QFMT) && !pci_out_supported(q)) || + (queue_type(q) == QDIO_IQDIO_QFMT && multicast_outbound(q))) + qdio_siga_sync_q(q); + + /* + * Don't check 128 buffers, as otherwise qdio_inbound_q_moved + * would return 0. + */ + count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK); + stop = add_buf(q->first_to_check, count); + + /* need to set count to 1 for non-qebsm */ + if (!is_qebsm(q)) + count = 1; + +check_next: + if (q->first_to_check == stop) + return q->first_to_check; + + count = get_buf_states(q, q->first_to_check, &state, count); + if (!count) + return q->first_to_check; + + switch (state) { + case SLSB_P_OUTPUT_EMPTY: + /* the adapter got it */ + QDIO_DBF_TEXT5(0, trace, "outpempt"); + + atomic_sub(count, &q->nr_buf_used); + q->first_to_check = add_buf(q->first_to_check, count); + /* + * We fetch all buffer states at once. get_buf_states may + * return count < stop. For QEBSM we do not loop. + */ + if (is_qebsm(q)) + break; + goto check_next; + case SLSB_P_OUTPUT_ERROR: + announce_buffer_error(q); + /* process the buffer, the upper layer will take care of it */ + q->first_to_check = add_buf(q->first_to_check, count); + atomic_sub(count, &q->nr_buf_used); + break; + case SLSB_CU_OUTPUT_PRIMED: + /* the adapter has not fetched the output yet */ + QDIO_DBF_TEXT5(0, trace, "outpprim"); + break; + case SLSB_P_OUTPUT_NOT_INIT: + case SLSB_P_OUTPUT_HALTED: + break; + default: + BUG(); + } + return q->first_to_check; +} + +/* all buffers processed? */ +static inline int qdio_outbound_q_done(struct qdio_q *q) +{ + return atomic_read(&q->nr_buf_used) == 0; +} + +static inline int qdio_outbound_q_moved(struct qdio_q *q) +{ + int bufnr; + + bufnr = get_outbound_buffer_frontier(q); + + if ((bufnr != q->last_move_ftc) || q->qdio_error) { + q->last_move_ftc = bufnr; + QDIO_DBF_TEXT4(0, trace, "oqhasmvd"); + QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); + return 1; + } else + return 0; +} + +/* + * VM could present us cc=2 and busy bit set on SIGA-write + * during reconfiguration of their Guest LAN (only in iqdio mode, + * otherwise qdio is asynchronous and cc=2 and busy bit there will take + * the queues down immediately). + * + * Therefore qdio_siga_output will try for a short time constantly, + * if such a condition occurs. If it doesn't change, it will + * increase the busy_siga_counter and save the timestamp, and + * schedule the queue for later processing. qdio_outbound_processing + * will check out the counter. If non-zero, it will call qdio_kick_outbound_q + * as often as the value of the counter. This will attempt further SIGA + * instructions. For each successful SIGA, the counter is + * decreased, for failing SIGAs the counter remains the same, after + * all. After some time of no movement, qdio_kick_outbound_q will + * finally fail and reflect corresponding error codes to call + * the upper layer module and have it take the queues down. + * + * Note that this is a change from the original HiperSockets design + * (saying cc=2 and busy bit means take the queues down), but in + * these days Guest LAN didn't exist... excessive cc=2 with busy bit + * conditions will still take the queues down, but the threshold is + * higher due to the Guest LAN environment. + * + * Called from outbound tasklet and do_QDIO handler. + */ +static void qdio_kick_outbound_q(struct qdio_q *q) +{ + int rc; +#ifdef CONFIG_QDIO_DEBUG + char dbf_text[15]; + + QDIO_DBF_TEXT5(0, trace, "kickoutq"); + QDIO_DBF_HEX5(0, trace, &q, sizeof(void *)); +#endif /* CONFIG_QDIO_DEBUG */ + + if (!need_siga_out(q)) + return; + + rc = qdio_siga_output(q); + switch (rc) { + case 0: + /* went smooth this time, reset timestamp */ + q->u.out.timestamp = 0; + + /* TODO: improve error handling for CC=0 case */ +#ifdef CONFIG_QDIO_DEBUG + QDIO_DBF_TEXT3(0, trace, "cc2reslv"); + sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no, q->nr, + atomic_read(&q->u.out.busy_siga_counter)); + QDIO_DBF_TEXT3(0, trace, dbf_text); +#endif /* CONFIG_QDIO_DEBUG */ + break; + /* cc=2 and busy bit */ + case (2 | QDIO_ERROR_SIGA_BUSY): + atomic_inc(&q->u.out.busy_siga_counter); + + /* if the last siga was successful, save timestamp here */ + if (!q->u.out.timestamp) + q->u.out.timestamp = get_usecs(); + + /* if we're in time, don't touch qdio_error */ + if (get_usecs() - q->u.out.timestamp < QDIO_BUSY_BIT_GIVE_UP) { + tasklet_schedule(&q->tasklet); + break; + } + QDIO_DBF_TEXT2(0, trace, "cc2REPRT"); +#ifdef CONFIG_QDIO_DEBUG + sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no, q->nr, + atomic_read(&q->u.out.busy_siga_counter)); + QDIO_DBF_TEXT3(0, trace, dbf_text); +#endif /* CONFIG_QDIO_DEBUG */ + default: + /* for plain cc=1, 2 or 3 */ + q->qdio_error = rc; + } +} + +static void qdio_kick_outbound_handler(struct qdio_q *q) +{ + int start, end, count; +#ifdef CONFIG_QDIO_DEBUG + char dbf_text[15]; +#endif + + start = q->first_to_kick; + end = q->last_move_ftc; + if (end >= start) + count = end - start; + else + count = end + QDIO_MAX_BUFFERS_PER_Q - start; + +#ifdef CONFIG_QDIO_DEBUG + QDIO_DBF_TEXT4(0, trace, "kickouth"); + QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); + + sprintf(dbf_text, "s=%2xc=%2x", start, count); + QDIO_DBF_TEXT4(0, trace, dbf_text); +#endif /* CONFIG_QDIO_DEBUG */ + + if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)) + return; + + q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, start, count, + q->irq_ptr->int_parm); + + /* for the next time: */ + q->first_to_kick = q->last_move_ftc; + q->qdio_error = 0; +} + +static void __qdio_outbound_processing(struct qdio_q *q) +{ + int siga_attempts; + + qdio_perf_stat_inc(&perf_stats.tasklet_outbound); + + /* see comment in qdio_kick_outbound_q */ + siga_attempts = atomic_read(&q->u.out.busy_siga_counter); + while (siga_attempts--) { + atomic_dec(&q->u.out.busy_siga_counter); + qdio_kick_outbound_q(q); + } + + BUG_ON(atomic_read(&q->nr_buf_used) < 0); + + if (qdio_outbound_q_moved(q)) + qdio_kick_outbound_handler(q); + + if (queue_type(q) == QDIO_ZFCP_QFMT) { + if (!pci_out_supported(q) && !qdio_outbound_q_done(q)) + tasklet_schedule(&q->tasklet); + return; + } + + /* bail out for HiperSockets unicast queues */ + if (queue_type(q) == QDIO_IQDIO_QFMT && !multicast_outbound(q)) + return; + + if (q->u.out.pci_out_enabled) + return; + + /* + * Now we know that queue type is either qeth without pci enabled + * or HiperSockets multicast. Make sure buffer switch from PRIMED to + * EMPTY is noticed and outbound_handler is called after some time. + */ + if (qdio_outbound_q_done(q)) + del_timer(&q->u.out.timer); + else { + if (!timer_pending(&q->u.out.timer)) { + mod_timer(&q->u.out.timer, jiffies + 10 * HZ); + qdio_perf_stat_inc(&perf_stats.debug_tl_out_timer); + } + } +} + +/* outbound tasklet */ +void qdio_outbound_processing(unsigned long data) +{ + struct qdio_q *q = (struct qdio_q *)data; + __qdio_outbound_processing(q); +} + +void qdio_outbound_timer(unsigned long data) +{ + struct qdio_q *q = (struct qdio_q *)data; + tasklet_schedule(&q->tasklet); +} + +/* called from thinint inbound tasklet */ +void qdio_check_outbound_after_thinint(struct qdio_q *q) +{ + struct qdio_q *out; + int i; + + if (!pci_out_supported(q)) + return; + + for_each_output_queue(q->irq_ptr, out, i) + if (!qdio_outbound_q_done(out)) + tasklet_schedule(&out->tasklet); +} + +static inline void qdio_set_state(struct qdio_irq *irq_ptr, + enum qdio_irq_states state) +{ +#ifdef CONFIG_QDIO_DEBUG + char dbf_text[15]; + + QDIO_DBF_TEXT5(0, trace, "newstate"); + sprintf(dbf_text, "%4x%4x", irq_ptr->schid.sch_no, state); + QDIO_DBF_TEXT5(0, trace, dbf_text); +#endif /* CONFIG_QDIO_DEBUG */ + + irq_ptr->state = state; + mb(); +} + +static void qdio_irq_check_sense(struct subchannel_id schid, struct irb *irb) +{ + char dbf_text[15]; + + if (irb->esw.esw0.erw.cons) { + sprintf(dbf_text, "sens%4x", schid.sch_no); + QDIO_DBF_TEXT2(1, trace, dbf_text); + QDIO_DBF_HEX0(0, trace, irb, 64); + QDIO_DBF_HEX0(0, trace, irb->ecw, 64); + } +} + +/* PCI interrupt handler */ +static void qdio_int_handler_pci(struct qdio_irq *irq_ptr) +{ + int i; + struct qdio_q *q; + + qdio_perf_stat_inc(&perf_stats.pci_int); + + for_each_input_queue(irq_ptr, q, i) + tasklet_schedule(&q->tasklet); + + if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED)) + return; + + for_each_output_queue(irq_ptr, q, i) { + if (qdio_outbound_q_done(q)) + continue; + + if (!siga_syncs_out_pci(q)) + qdio_siga_sync_q(q); + + tasklet_schedule(&q->tasklet); + } +} + +static void qdio_handle_activate_check(struct ccw_device *cdev, + unsigned long intparm, int cstat, int dstat) +{ + struct qdio_irq *irq_ptr = cdev->private->qdio_data; + struct qdio_q *q; + char dbf_text[15]; + + QDIO_DBF_TEXT2(1, trace, "ick2"); + sprintf(dbf_text, "%s", cdev->dev.bus_id); + QDIO_DBF_TEXT2(1, trace, dbf_text); + QDIO_DBF_HEX2(0, trace, &intparm, sizeof(int)); + QDIO_DBF_HEX2(0, trace, &dstat, sizeof(int)); + QDIO_DBF_HEX2(0, trace, &cstat, sizeof(int)); + + if (irq_ptr->nr_input_qs) { + q = irq_ptr->input_qs[0]; + } else if (irq_ptr->nr_output_qs) { + q = irq_ptr->output_qs[0]; + } else { + dump_stack(); + goto no_handler; + } + q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION, + 0, -1, -1, irq_ptr->int_parm); +no_handler: + qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); +} + +static void qdio_call_shutdown(struct work_struct *work) +{ + struct ccw_device_private *priv; + struct ccw_device *cdev; + + priv = container_of(work, struct ccw_device_private, kick_work); + cdev = priv->cdev; + qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); + put_device(&cdev->dev); +} + +static void qdio_int_error(struct ccw_device *cdev) +{ + struct qdio_irq *irq_ptr = cdev->private->qdio_data; + + switch (irq_ptr->state) { + case QDIO_IRQ_STATE_INACTIVE: + case QDIO_IRQ_STATE_CLEANUP: + qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); + break; + case QDIO_IRQ_STATE_ESTABLISHED: + case QDIO_IRQ_STATE_ACTIVE: + qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); + if (get_device(&cdev->dev)) { + /* Can't call shutdown from interrupt context. */ + PREPARE_WORK(&cdev->private->kick_work, + qdio_call_shutdown); + queue_work(ccw_device_work, &cdev->private->kick_work); + } + break; + default: + WARN_ON(1); + } + wake_up(&cdev->private->wait_q); +} + +static int qdio_establish_check_errors(struct ccw_device *cdev, int cstat, + int dstat) +{ + struct qdio_irq *irq_ptr = cdev->private->qdio_data; + + if (cstat || (dstat & ~(DEV_STAT_CHN_END | DEV_STAT_DEV_END))) { + QDIO_DBF_TEXT2(1, setup, "eq:ckcon"); + goto error; + } + + if (!(dstat & DEV_STAT_DEV_END)) { + QDIO_DBF_TEXT2(1, setup, "eq:no de"); + goto error; + } + + if (dstat & ~(DEV_STAT_CHN_END | DEV_STAT_DEV_END)) { + QDIO_DBF_TEXT2(1, setup, "eq:badio"); + goto error; + } + return 0; +error: + QDIO_DBF_HEX2(0, trace, &cstat, sizeof(int)); + QDIO_DBF_HEX2(0, trace, &dstat, sizeof(int)); + qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); + return 1; +} + +static void qdio_establish_handle_irq(struct ccw_device *cdev, int cstat, + int dstat) +{ + struct qdio_irq *irq_ptr = cdev->private->qdio_data; + char dbf_text[15]; + + sprintf(dbf_text, "qehi%4x", cdev->private->schid.sch_no); + QDIO_DBF_TEXT0(0, setup, dbf_text); + QDIO_DBF_TEXT0(0, trace, dbf_text); + + if (!qdio_establish_check_errors(cdev, cstat, dstat)) + qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED); +} + +/* qdio interrupt handler */ +void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, + struct irb *irb) +{ + struct qdio_irq *irq_ptr = cdev->private->qdio_data; + int cstat, dstat; + char dbf_text[15]; + + qdio_perf_stat_inc(&perf_stats.qdio_int); + + if (!intparm || !irq_ptr) { + sprintf(dbf_text, "qihd%4x", cdev->private->schid.sch_no); + QDIO_DBF_TEXT2(1, setup, dbf_text); + return; + } + + if (IS_ERR(irb)) { + switch (PTR_ERR(irb)) { + case -EIO: + sprintf(dbf_text, "ierr%4x", + cdev->private->schid.sch_no); + QDIO_DBF_TEXT2(1, setup, dbf_text); + qdio_int_error(cdev); + return; + case -ETIMEDOUT: + sprintf(dbf_text, "qtoh%4x", + cdev->private->schid.sch_no); + QDIO_DBF_TEXT2(1, setup, dbf_text); + qdio_int_error(cdev); + return; + default: + WARN_ON(1); + return; + } + } + qdio_irq_check_sense(irq_ptr->schid, irb); + + cstat = irb->scsw.cmd.cstat; + dstat = irb->scsw.cmd.dstat; + + switch (irq_ptr->state) { + case QDIO_IRQ_STATE_INACTIVE: + qdio_establish_handle_irq(cdev, cstat, dstat); + break; + + case QDIO_IRQ_STATE_CLEANUP: + qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); + break; + + case QDIO_IRQ_STATE_ESTABLISHED: + case QDIO_IRQ_STATE_ACTIVE: + if (cstat & SCHN_STAT_PCI) { + qdio_int_handler_pci(irq_ptr); + /* no state change so no need to wake up wait_q */ + return; + } + if ((cstat & ~SCHN_STAT_PCI) || dstat) { + qdio_handle_activate_check(cdev, intparm, cstat, + dstat); + break; + } + default: + WARN_ON(1); + } + wake_up(&cdev->private->wait_q); +} + +/** + * qdio_get_ssqd_desc - get qdio subchannel description + * @cdev: ccw device to get description for + * + * Returns a pointer to the saved qdio subchannel description, + * or NULL for not setup qdio devices. + */ +struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev) +{ + struct qdio_irq *irq_ptr; + + QDIO_DBF_TEXT0(0, setup, "getssqd"); + + irq_ptr = cdev->private->qdio_data; + if (!irq_ptr) + return NULL; + + return &irq_ptr->ssqd_desc; +} +EXPORT_SYMBOL_GPL(qdio_get_ssqd_desc); + +/** + * qdio_cleanup - shutdown queues and free data structures + * @cdev: associated ccw device + * @how: use halt or clear to shutdown + * + * This function calls qdio_shutdown() for @cdev with method @how + * and on success qdio_free() for @cdev. + */ +int qdio_cleanup(struct ccw_device *cdev, int how) +{ + struct qdio_irq *irq_ptr; + char dbf_text[15]; + int rc; + + irq_ptr = cdev->private->qdio_data; + if (!irq_ptr) + return -ENODEV; + + sprintf(dbf_text, "qcln%4x", irq_ptr->schid.sch_no); + QDIO_DBF_TEXT1(0, trace, dbf_text); + QDIO_DBF_TEXT0(0, setup, dbf_text); + + rc = qdio_shutdown(cdev, how); + if (rc == 0) + rc = qdio_free(cdev); + return rc; +} +EXPORT_SYMBOL_GPL(qdio_cleanup); + +static void qdio_shutdown_queues(struct ccw_device *cdev) +{ + struct qdio_irq *irq_ptr = cdev->private->qdio_data; + struct qdio_q *q; + int i; + + for_each_input_queue(irq_ptr, q, i) + tasklet_disable(&q->tasklet); + + for_each_output_queue(irq_ptr, q, i) { + tasklet_disable(&q->tasklet); + del_timer(&q->u.out.timer); + } +} + +/** + * qdio_shutdown - shut down a qdio subchannel + * @cdev: associated ccw device + * @how: use halt or clear to shutdown + */ +int qdio_shutdown(struct ccw_device *cdev, int how) +{ + struct qdio_irq *irq_ptr; + int rc; + unsigned long flags; + char dbf_text[15]; + + irq_ptr = cdev->private->qdio_data; + if (!irq_ptr) + return -ENODEV; + + mutex_lock(&irq_ptr->setup_mutex); + /* + * Subchannel was already shot down. We cannot prevent being called + * twice since cio may trigger a shutdown asynchronously. + */ + if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) { + mutex_unlock(&irq_ptr->setup_mutex); + return 0; + } + + sprintf(dbf_text, "qsqs%4x", irq_ptr->schid.sch_no); + QDIO_DBF_TEXT1(0, trace, dbf_text); + QDIO_DBF_TEXT0(0, setup, dbf_text); + + tiqdio_remove_input_queues(irq_ptr); + qdio_shutdown_queues(cdev); + qdio_shutdown_debug_entries(irq_ptr, cdev); + + /* cleanup subchannel */ + spin_lock_irqsave(get_ccwdev_lock(cdev), flags); + + if (how & QDIO_FLAG_CLEANUP_USING_CLEAR) + rc = ccw_device_clear(cdev, QDIO_DOING_CLEANUP); + else + /* default behaviour is halt */ + rc = ccw_device_halt(cdev, QDIO_DOING_CLEANUP); + if (rc) { + sprintf(dbf_text, "sher%4x", irq_ptr->schid.sch_no); + QDIO_DBF_TEXT0(0, setup, dbf_text); + sprintf(dbf_text, "rc=%d", rc); + QDIO_DBF_TEXT0(0, setup, dbf_text); + goto no_cleanup; + } + + qdio_set_state(irq_ptr, QDIO_IRQ_STATE_CLEANUP); + spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags); + wait_event_interruptible_timeout(cdev->private->wait_q, + irq_ptr->state == QDIO_IRQ_STATE_INACTIVE || + irq_ptr->state == QDIO_IRQ_STATE_ERR, + 10 * HZ); + spin_lock_irqsave(get_ccwdev_lock(cdev), flags); + +no_cleanup: + qdio_shutdown_thinint(irq_ptr); + + /* restore interrupt handler */ + if ((void *)cdev->handler == (void *)qdio_int_handler) + cdev->handler = irq_ptr->orig_handler; + spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags); + + qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); + mutex_unlock(&irq_ptr->setup_mutex); + module_put(THIS_MODULE); + if (rc) + return rc; + return 0; +} +EXPORT_SYMBOL_GPL(qdio_shutdown); + +/** + * qdio_free - free data structures for a qdio subchannel + * @cdev: associated ccw device + */ +int qdio_free(struct ccw_device *cdev) +{ + struct qdio_irq *irq_ptr; + char dbf_text[15]; + + irq_ptr = cdev->private->qdio_data; + if (!irq_ptr) + return -ENODEV; + + mutex_lock(&irq_ptr->setup_mutex); + + sprintf(dbf_text, "qfqs%4x", irq_ptr->schid.sch_no); + QDIO_DBF_TEXT1(0, trace, dbf_text); + QDIO_DBF_TEXT0(0, setup, dbf_text); + + cdev->private->qdio_data = NULL; + mutex_unlock(&irq_ptr->setup_mutex); + + qdio_release_memory(irq_ptr); + return 0; +} +EXPORT_SYMBOL_GPL(qdio_free); + +/** + * qdio_initialize - allocate and establish queues for a qdio subchannel + * @init_data: initialization data + * + * This function first allocates queues via qdio_allocate() and on success + * establishes them via qdio_establish(). + */ +int qdio_initialize(struct qdio_initialize *init_data) +{ + int rc; + char dbf_text[15]; + + sprintf(dbf_text, "qini%4x", init_data->cdev->private->schid.sch_no); + QDIO_DBF_TEXT0(0, setup, dbf_text); + QDIO_DBF_TEXT0(0, trace, dbf_text); + + rc = qdio_allocate(init_data); + if (rc) + return rc; + + rc = qdio_establish(init_data); + if (rc) + qdio_free(init_data->cdev); + return rc; +} +EXPORT_SYMBOL_GPL(qdio_initialize); + +/** + * qdio_allocate - allocate qdio queues and associated data + * @init_data: initialization data + */ +int qdio_allocate(struct qdio_initialize *init_data) +{ + struct qdio_irq *irq_ptr; + char dbf_text[15]; + + sprintf(dbf_text, "qalc%4x", init_data->cdev->private->schid.sch_no); + QDIO_DBF_TEXT0(0, setup, dbf_text); + QDIO_DBF_TEXT0(0, trace, dbf_text); + + if ((init_data->no_input_qs && !init_data->input_handler) || + (init_data->no_output_qs && !init_data->output_handler)) + return -EINVAL; + + if ((init_data->no_input_qs > QDIO_MAX_QUEUES_PER_IRQ) || + (init_data->no_output_qs > QDIO_MAX_QUEUES_PER_IRQ)) + return -EINVAL; + + if ((!init_data->input_sbal_addr_array) || + (!init_data->output_sbal_addr_array)) + return -EINVAL; + + qdio_allocate_do_dbf(init_data); + + /* irq_ptr must be in GFP_DMA since it contains ccw1.cda */ + irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA); + if (!irq_ptr) + goto out_err; + QDIO_DBF_TEXT0(0, setup, "irq_ptr:"); + QDIO_DBF_HEX0(0, setup, &irq_ptr, sizeof(void *)); + + mutex_init(&irq_ptr->setup_mutex); + + /* + * Allocate a page for the chsc calls in qdio_establish. + * Must be pre-allocated since a zfcp recovery will call + * qdio_establish. In case of low memory and swap on a zfcp disk + * we may not be able to allocate memory otherwise. + */ + irq_ptr->chsc_page = get_zeroed_page(GFP_KERNEL); + if (!irq_ptr->chsc_page) + goto out_rel; + + /* qdr is used in ccw1.cda which is u32 */ + irq_ptr->qdr = kzalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA); + if (!irq_ptr->qdr) + goto out_rel; + WARN_ON((unsigned long)irq_ptr->qdr & 0xfff); + + QDIO_DBF_TEXT0(0, setup, "qdr:"); + QDIO_DBF_HEX0(0, setup, &irq_ptr->qdr, sizeof(void *)); + + if (qdio_allocate_qs(irq_ptr, init_data->no_input_qs, + init_data->no_output_qs)) + goto out_rel; + + init_data->cdev->private->qdio_data = irq_ptr; + qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); + return 0; +out_rel: + qdio_release_memory(irq_ptr); +out_err: + return -ENOMEM; +} +EXPORT_SYMBOL_GPL(qdio_allocate); + +/** + * qdio_establish - establish queues on a qdio subchannel + * @init_data: initialization data + */ +int qdio_establish(struct qdio_initialize *init_data) +{ + char dbf_text[20]; + struct qdio_irq *irq_ptr; + struct ccw_device *cdev = init_data->cdev; + unsigned long saveflags; + int rc; + + irq_ptr = cdev->private->qdio_data; + if (!irq_ptr) + return -ENODEV; + + if (cdev->private->state != DEV_STATE_ONLINE) + return -EINVAL; + + if (!try_module_get(THIS_MODULE)) + return -EINVAL; + + sprintf(dbf_text, "qest%4x", cdev->private->schid.sch_no); + QDIO_DBF_TEXT0(0, setup, dbf_text); + QDIO_DBF_TEXT0(0, trace, dbf_text); + + mutex_lock(&irq_ptr->setup_mutex); + qdio_setup_irq(init_data); + + rc = qdio_establish_thinint(irq_ptr); + if (rc) { + mutex_unlock(&irq_ptr->setup_mutex); + qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); + return rc; + } + + /* establish q */ + irq_ptr->ccw.cmd_code = irq_ptr->equeue.cmd; + irq_ptr->ccw.flags = CCW_FLAG_SLI; + irq_ptr->ccw.count = irq_ptr->equeue.count; + irq_ptr->ccw.cda = (u32)((addr_t)irq_ptr->qdr); + + spin_lock_irqsave(get_ccwdev_lock(cdev), saveflags); + ccw_device_set_options_mask(cdev, 0); + + rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ESTABLISH, 0, 0); + if (rc) { + sprintf(dbf_text, "eq:io%4x", irq_ptr->schid.sch_no); + QDIO_DBF_TEXT2(1, setup, dbf_text); + sprintf(dbf_text, "eq:rc%4x", rc); + QDIO_DBF_TEXT2(1, setup, dbf_text); + } + spin_unlock_irqrestore(get_ccwdev_lock(cdev), saveflags); + + if (rc) { + mutex_unlock(&irq_ptr->setup_mutex); + qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); + return rc; + } + + wait_event_interruptible_timeout(cdev->private->wait_q, + irq_ptr->state == QDIO_IRQ_STATE_ESTABLISHED || + irq_ptr->state == QDIO_IRQ_STATE_ERR, HZ); + + if (irq_ptr->state != QDIO_IRQ_STATE_ESTABLISHED) { + mutex_unlock(&irq_ptr->setup_mutex); + qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); + return -EIO; + } + + qdio_setup_ssqd_info(irq_ptr); + sprintf(dbf_text, "qib ac%2x", irq_ptr->qib.ac); + QDIO_DBF_TEXT2(0, setup, dbf_text); + + /* qebsm is now setup if available, initialize buffer states */ + qdio_init_buf_states(irq_ptr); + + mutex_unlock(&irq_ptr->setup_mutex); + qdio_print_subchannel_info(irq_ptr, cdev); + qdio_setup_debug_entries(irq_ptr, cdev); + return 0; +} +EXPORT_SYMBOL_GPL(qdio_establish); + +/** + * qdio_activate - activate queues on a qdio subchannel + * @cdev: associated cdev + */ +int qdio_activate(struct ccw_device *cdev) +{ + struct qdio_irq *irq_ptr; + int rc; + unsigned long saveflags; + char dbf_text[20]; + + irq_ptr = cdev->private->qdio_data; + if (!irq_ptr) + return -ENODEV; + + if (cdev->private->state != DEV_STATE_ONLINE) + return -EINVAL; + + mutex_lock(&irq_ptr->setup_mutex); + if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) { + rc = -EBUSY; + goto out; + } + + sprintf(dbf_text, "qact%4x", irq_ptr->schid.sch_no); + QDIO_DBF_TEXT2(0, setup, dbf_text); + QDIO_DBF_TEXT2(0, trace, dbf_text); + + irq_ptr->ccw.cmd_code = irq_ptr->aqueue.cmd; + irq_ptr->ccw.flags = CCW_FLAG_SLI; + irq_ptr->ccw.count = irq_ptr->aqueue.count; + irq_ptr->ccw.cda = 0; + + spin_lock_irqsave(get_ccwdev_lock(cdev), saveflags); + ccw_device_set_options(cdev, CCWDEV_REPORT_ALL); + + rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ACTIVATE, + 0, DOIO_DENY_PREFETCH); + if (rc) { + sprintf(dbf_text, "aq:io%4x", irq_ptr->schid.sch_no); + QDIO_DBF_TEXT2(1, setup, dbf_text); + sprintf(dbf_text, "aq:rc%4x", rc); + QDIO_DBF_TEXT2(1, setup, dbf_text); + } + spin_unlock_irqrestore(get_ccwdev_lock(cdev), saveflags); + + if (rc) + goto out; + + if (is_thinint_irq(irq_ptr)) + tiqdio_add_input_queues(irq_ptr); + + /* wait for subchannel to become active */ + msleep(5); + + switch (irq_ptr->state) { + case QDIO_IRQ_STATE_STOPPED: + case QDIO_IRQ_STATE_ERR: + mutex_unlock(&irq_ptr->setup_mutex); + qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); + return -EIO; + default: + qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ACTIVE); + rc = 0; + } +out: + mutex_unlock(&irq_ptr->setup_mutex); + return rc; +} +EXPORT_SYMBOL_GPL(qdio_activate); + +static inline int buf_in_between(int bufnr, int start, int count) +{ + int end = add_buf(start, count); + + if (end > start) { + if (bufnr >= start && bufnr < end) + return 1; + else + return 0; + } + + /* wrap-around case */ + if ((bufnr >= start && bufnr <= QDIO_MAX_BUFFERS_PER_Q) || + (bufnr < end)) + return 1; + else + return 0; +} + +/** + * handle_inbound - reset processed input buffers + * @q: queue containing the buffers + * @callflags: flags + * @bufnr: first buffer to process + * @count: how many buffers are emptied + */ +static void handle_inbound(struct qdio_q *q, unsigned int callflags, + int bufnr, int count) +{ + unsigned long flags; + int used, rc; + + /* + * do_QDIO could run in parallel with the queue tasklet so the + * upper-layer programm could empty the ACK'ed buffer here. + * If that happens we must clear the polling flag, otherwise + * qdio_stop_polling() could set the buffer to NOT_INIT after + * it was set to EMPTY which would kill us. + */ + spin_lock_irqsave(&q->u.in.lock, flags); + if (q->u.in.polling) + if (buf_in_between(q->last_move_ftc, bufnr, count)) + q->u.in.polling = 0; + + count = set_buf_states(q, bufnr, SLSB_CU_INPUT_EMPTY, count); + spin_unlock_irqrestore(&q->u.in.lock, flags); + + used = atomic_add_return(count, &q->nr_buf_used) - count; + BUG_ON(used + count > QDIO_MAX_BUFFERS_PER_Q); + + /* no need to signal as long as the adapter had free buffers */ + if (used) + return; + + if (need_siga_in(q)) { + rc = qdio_siga_input(q); + if (rc) + q->qdio_error = rc; + } +} + +/** + * handle_outbound - process filled outbound buffers + * @q: queue containing the buffers + * @callflags: flags + * @bufnr: first buffer to process + * @count: how many buffers are filled + */ +static void handle_outbound(struct qdio_q *q, unsigned int callflags, + int bufnr, int count) +{ + unsigned char state; + int used; + + qdio_perf_stat_inc(&perf_stats.outbound_handler); + + count = set_buf_states(q, bufnr, SLSB_CU_OUTPUT_PRIMED, count); + used = atomic_add_return(count, &q->nr_buf_used); + BUG_ON(used > QDIO_MAX_BUFFERS_PER_Q); + + if (callflags & QDIO_FLAG_PCI_OUT) + q->u.out.pci_out_enabled = 1; + else + q->u.out.pci_out_enabled = 0; + + if (queue_type(q) == QDIO_IQDIO_QFMT) { + if (multicast_outbound(q)) + qdio_kick_outbound_q(q); + else + /* + * One siga-w per buffer required for unicast + * HiperSockets. + */ + while (count--) + qdio_kick_outbound_q(q); + goto out; + } + + if (need_siga_sync(q)) { + qdio_siga_sync_q(q); + goto out; + } + + /* try to fast requeue buffers */ + get_buf_state(q, prev_buf(bufnr), &state); + if (state != SLSB_CU_OUTPUT_PRIMED) + qdio_kick_outbound_q(q); + else { + QDIO_DBF_TEXT5(0, trace, "fast-req"); + qdio_perf_stat_inc(&perf_stats.fast_requeue); + } +out: + /* Fixme: could wait forever if called from process context */ + tasklet_schedule(&q->tasklet); +} + +/** + * do_QDIO - process input or output buffers + * @cdev: associated ccw_device for the qdio subchannel + * @callflags: input or output and special flags from the program + * @q_nr: queue number + * @bufnr: buffer number + * @count: how many buffers to process + */ +int do_QDIO(struct ccw_device *cdev, unsigned int callflags, + int q_nr, int bufnr, int count) +{ + struct qdio_irq *irq_ptr; +#ifdef CONFIG_QDIO_DEBUG + char dbf_text[20]; + + sprintf(dbf_text, "doQD%04x", cdev->private->schid.sch_no); + QDIO_DBF_TEXT3(0, trace, dbf_text); +#endif /* CONFIG_QDIO_DEBUG */ + + if ((bufnr > QDIO_MAX_BUFFERS_PER_Q) || + (count > QDIO_MAX_BUFFERS_PER_Q) || + (q_nr > QDIO_MAX_QUEUES_PER_IRQ)) + return -EINVAL; + + if (!count) + return 0; + + irq_ptr = cdev->private->qdio_data; + if (!irq_ptr) + return -ENODEV; + +#ifdef CONFIG_QDIO_DEBUG + if (callflags & QDIO_FLAG_SYNC_INPUT) + QDIO_DBF_HEX3(0, trace, &irq_ptr->input_qs[q_nr], + sizeof(void *)); + else + QDIO_DBF_HEX3(0, trace, &irq_ptr->output_qs[q_nr], + sizeof(void *)); + + sprintf(dbf_text, "flag%04x", callflags); + QDIO_DBF_TEXT3(0, trace, dbf_text); + sprintf(dbf_text, "qi%02xct%02x", bufnr, count); + QDIO_DBF_TEXT3(0, trace, dbf_text); +#endif /* CONFIG_QDIO_DEBUG */ + + if (irq_ptr->state != QDIO_IRQ_STATE_ACTIVE) + return -EBUSY; + + if (callflags & QDIO_FLAG_SYNC_INPUT) + handle_inbound(irq_ptr->input_qs[q_nr], + callflags, bufnr, count); + else if (callflags & QDIO_FLAG_SYNC_OUTPUT) + handle_outbound(irq_ptr->output_qs[q_nr], + callflags, bufnr, count); + else { + QDIO_DBF_TEXT3(1, trace, "doQD:inv"); + return -EINVAL; + } + return 0; +} +EXPORT_SYMBOL_GPL(do_QDIO); + +static int __init init_QDIO(void) +{ + int rc; + + rc = qdio_setup_init(); + if (rc) + return rc; + rc = tiqdio_allocate_memory(); + if (rc) + goto out_cache; + rc = qdio_debug_init(); + if (rc) + goto out_ti; + rc = qdio_setup_perf_stats(); + if (rc) + goto out_debug; + rc = tiqdio_register_thinints(); + if (rc) + goto out_perf; + return 0; + +out_perf: + qdio_remove_perf_stats(); +out_debug: + qdio_debug_exit(); +out_ti: + tiqdio_free_memory(); +out_cache: + qdio_setup_exit(); + return rc; +} + +static void __exit exit_QDIO(void) +{ + tiqdio_unregister_thinints(); + tiqdio_free_memory(); + qdio_remove_perf_stats(); + qdio_debug_exit(); + qdio_setup_exit(); +} + +module_init(init_QDIO); +module_exit(exit_QDIO); diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c new file mode 100644 index 000000000000..ea01b85b1cc9 --- /dev/null +++ b/drivers/s390/cio/qdio_perf.c @@ -0,0 +1,151 @@ +/* + * drivers/s390/cio/qdio_perf.c + * + * Copyright IBM Corp. 2008 + * + * Author: Jan Glauber (jang@linux.vnet.ibm.com) + */ +#include +#include +#include +#include + +#include "cio.h" +#include "css.h" +#include "device.h" +#include "ioasm.h" +#include "chsc.h" +#include "qdio_debug.h" +#include "qdio_perf.h" + +int qdio_performance_stats; +struct qdio_perf_stats perf_stats; + +#ifdef CONFIG_PROC_FS +static struct proc_dir_entry *qdio_perf_pde; +#endif + +inline void qdio_perf_stat_inc(atomic_long_t *count) +{ + if (qdio_performance_stats) + atomic_long_inc(count); +} + +inline void qdio_perf_stat_dec(atomic_long_t *count) +{ + if (qdio_performance_stats) + atomic_long_dec(count); +} + +/* + * procfs functions + */ +static int qdio_perf_proc_show(struct seq_file *m, void *v) +{ + seq_printf(m, "Number of qdio interrupts\t\t\t: %li\n", + (long)atomic_long_read(&perf_stats.qdio_int)); + seq_printf(m, "Number of PCI interrupts\t\t\t: %li\n", + (long)atomic_long_read(&perf_stats.pci_int)); + seq_printf(m, "Number of adapter interrupts\t\t\t: %li\n", + (long)atomic_long_read(&perf_stats.thin_int)); + seq_printf(m, "\n"); + seq_printf(m, "Inbound tasklet runs\t\t\t\t: %li\n", + (long)atomic_long_read(&perf_stats.tasklet_inbound)); + seq_printf(m, "Outbound tasklet runs\t\t\t\t: %li\n", + (long)atomic_long_read(&perf_stats.tasklet_outbound)); + seq_printf(m, "Adapter interrupt tasklet runs/loops\t\t: %li/%li\n", + (long)atomic_long_read(&perf_stats.tasklet_thinint), + (long)atomic_long_read(&perf_stats.tasklet_thinint_loop)); + seq_printf(m, "Adapter interrupt inbound tasklet runs/loops\t: %li/%li\n", + (long)atomic_long_read(&perf_stats.thinint_inbound), + (long)atomic_long_read(&perf_stats.thinint_inbound_loop)); + seq_printf(m, "\n"); + seq_printf(m, "Number of SIGA In issued\t\t\t: %li\n", + (long)atomic_long_read(&perf_stats.siga_in)); + seq_printf(m, "Number of SIGA Out issued\t\t\t: %li\n", + (long)atomic_long_read(&perf_stats.siga_out)); + seq_printf(m, "Number of SIGA Sync issued\t\t\t: %li\n", + (long)atomic_long_read(&perf_stats.siga_sync)); + seq_printf(m, "\n"); + seq_printf(m, "Number of inbound transfers\t\t\t: %li\n", + (long)atomic_long_read(&perf_stats.inbound_handler)); + seq_printf(m, "Number of outbound transfers\t\t\t: %li\n", + (long)atomic_long_read(&perf_stats.outbound_handler)); + seq_printf(m, "\n"); + seq_printf(m, "Number of fast requeues (outg. SBAL w/o SIGA)\t: %li\n", + (long)atomic_long_read(&perf_stats.fast_requeue)); + seq_printf(m, "Number of outbound tasklet mod_timer calls\t: %li\n", + (long)atomic_long_read(&perf_stats.debug_tl_out_timer)); + seq_printf(m, "Number of stop polling calls\t\t\t: %li\n", + (long)atomic_long_read(&perf_stats.debug_stop_polling)); + seq_printf(m, "AI inbound tasklet loops after stop polling\t: %li\n", + (long)atomic_long_read(&perf_stats.thinint_inbound_loop2)); + seq_printf(m, "\n"); + return 0; +} +static int qdio_perf_seq_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, qdio_perf_proc_show, NULL); +} + +static struct file_operations qdio_perf_proc_fops = { + .owner = THIS_MODULE, + .open = qdio_perf_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* + * sysfs functions + */ +static ssize_t qdio_perf_stats_show(struct bus_type *bus, char *buf) +{ + return sprintf(buf, "%i\n", qdio_performance_stats ? 1 : 0); +} + +static ssize_t qdio_perf_stats_store(struct bus_type *bus, + const char *buf, size_t count) +{ + unsigned long i; + + if (strict_strtoul(buf, 16, &i) != 0) + return -EINVAL; + if ((i != 0) && (i != 1)) + return -EINVAL; + if (i == qdio_performance_stats) + return count; + + qdio_performance_stats = i; + /* reset performance statistics */ + if (i == 0) + memset(&perf_stats, 0, sizeof(struct qdio_perf_stats)); + return count; +} + +static BUS_ATTR(qdio_performance_stats, 0644, qdio_perf_stats_show, + qdio_perf_stats_store); + +int __init qdio_setup_perf_stats(void) +{ + int rc; + + rc = bus_create_file(&ccw_bus_type, &bus_attr_qdio_performance_stats); + if (rc) + return rc; + +#ifdef CONFIG_PROC_FS + memset(&perf_stats, 0, sizeof(struct qdio_perf_stats)); + qdio_perf_pde = proc_create("qdio_perf", S_IFREG | S_IRUGO, + NULL, &qdio_perf_proc_fops); +#endif + return 0; +} + +void __exit qdio_remove_perf_stats(void) +{ +#ifdef CONFIG_PROC_FS + remove_proc_entry("qdio_perf", NULL); +#endif + bus_remove_file(&ccw_bus_type, &bus_attr_qdio_performance_stats); +} diff --git a/drivers/s390/cio/qdio_perf.h b/drivers/s390/cio/qdio_perf.h new file mode 100644 index 000000000000..5c406a8b7387 --- /dev/null +++ b/drivers/s390/cio/qdio_perf.h @@ -0,0 +1,54 @@ +/* + * drivers/s390/cio/qdio_perf.h + * + * Copyright IBM Corp. 2008 + * + * Author: Jan Glauber (jang@linux.vnet.ibm.com) + */ +#ifndef QDIO_PERF_H +#define QDIO_PERF_H + +#include +#include +#include + +struct qdio_perf_stats { + /* interrupt handler calls */ + atomic_long_t qdio_int; + atomic_long_t pci_int; + atomic_long_t thin_int; + + /* tasklet runs */ + atomic_long_t tasklet_inbound; + atomic_long_t tasklet_outbound; + atomic_long_t tasklet_thinint; + atomic_long_t tasklet_thinint_loop; + atomic_long_t thinint_inbound; + atomic_long_t thinint_inbound_loop; + atomic_long_t thinint_inbound_loop2; + + /* signal adapter calls */ + atomic_long_t siga_out; + atomic_long_t siga_in; + atomic_long_t siga_sync; + + /* misc */ + atomic_long_t inbound_handler; + atomic_long_t outbound_handler; + atomic_long_t fast_requeue; + + /* for debugging */ + atomic_long_t debug_tl_out_timer; + atomic_long_t debug_stop_polling; +}; + +extern struct qdio_perf_stats perf_stats; +extern int qdio_performance_stats; + +int qdio_setup_perf_stats(void); +void qdio_remove_perf_stats(void); + +extern void qdio_perf_stat_inc(atomic_long_t *count); +extern void qdio_perf_stat_dec(atomic_long_t *count); + +#endif diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c new file mode 100644 index 000000000000..f0923a8aceda --- /dev/null +++ b/drivers/s390/cio/qdio_setup.c @@ -0,0 +1,521 @@ +/* + * driver/s390/cio/qdio_setup.c + * + * qdio queue initialization + * + * Copyright (C) IBM Corp. 2008 + * Author(s): Jan Glauber + */ +#include +#include +#include + +#include "cio.h" +#include "css.h" +#include "device.h" +#include "ioasm.h" +#include "chsc.h" +#include "qdio.h" +#include "qdio_debug.h" + +static struct kmem_cache *qdio_q_cache; + +/* + * qebsm is only available under 64bit but the adapter sets the feature + * flag anyway, so we manually override it. + */ +static inline int qebsm_possible(void) +{ +#ifdef CONFIG_64BIT + return css_general_characteristics.qebsm; +#endif + return 0; +} + +/* + * qib_param_field: pointer to 128 bytes or NULL, if no param field + * nr_input_qs: pointer to nr_queues*128 words of data or NULL + */ +static void set_impl_params(struct qdio_irq *irq_ptr, + unsigned int qib_param_field_format, + unsigned char *qib_param_field, + unsigned long *input_slib_elements, + unsigned long *output_slib_elements) +{ + struct qdio_q *q; + int i, j; + + if (!irq_ptr) + return; + + WARN_ON((unsigned long)&irq_ptr->qib & 0xff); + irq_ptr->qib.pfmt = qib_param_field_format; + if (qib_param_field) + memcpy(irq_ptr->qib.parm, qib_param_field, + QDIO_MAX_BUFFERS_PER_Q); + + if (!input_slib_elements) + goto output; + + for_each_input_queue(irq_ptr, q, i) { + for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; j++) + q->slib->slibe[j].parms = + input_slib_elements[i * QDIO_MAX_BUFFERS_PER_Q + j]; + } +output: + if (!output_slib_elements) + return; + + for_each_output_queue(irq_ptr, q, i) { + for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; j++) + q->slib->slibe[j].parms = + output_slib_elements[i * QDIO_MAX_BUFFERS_PER_Q + j]; + } +} + +static int __qdio_allocate_qs(struct qdio_q **irq_ptr_qs, int nr_queues) +{ + struct qdio_q *q; + int i; + + for (i = 0; i < nr_queues; i++) { + q = kmem_cache_alloc(qdio_q_cache, GFP_KERNEL); + if (!q) + return -ENOMEM; + WARN_ON((unsigned long)q & 0xff); + + q->slib = (struct slib *) __get_free_page(GFP_KERNEL); + if (!q->slib) { + kmem_cache_free(qdio_q_cache, q); + return -ENOMEM; + } + WARN_ON((unsigned long)q->slib & 0x7ff); + irq_ptr_qs[i] = q; + } + return 0; +} + +int qdio_allocate_qs(struct qdio_irq *irq_ptr, int nr_input_qs, int nr_output_qs) +{ + int rc; + + rc = __qdio_allocate_qs(irq_ptr->input_qs, nr_input_qs); + if (rc) + return rc; + rc = __qdio_allocate_qs(irq_ptr->output_qs, nr_output_qs); + return rc; +} + +static void setup_queues_misc(struct qdio_q *q, struct qdio_irq *irq_ptr, + qdio_handler_t *handler, int i) +{ + /* must be cleared by every qdio_establish */ + memset(q, 0, ((char *)&q->slib) - ((char *)q)); + memset(q->slib, 0, PAGE_SIZE); + + q->irq_ptr = irq_ptr; + q->mask = 1 << (31 - i); + q->nr = i; + q->handler = handler; +} + +static void setup_storage_lists(struct qdio_q *q, struct qdio_irq *irq_ptr, + void **sbals_array, char *dbf_text, int i) +{ + struct qdio_q *prev; + int j; + + QDIO_DBF_TEXT0(0, setup, dbf_text); + QDIO_DBF_HEX0(0, setup, &q, sizeof(void *)); + + q->sl = (struct sl *)((char *)q->slib + PAGE_SIZE / 2); + + /* fill in sbal */ + for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; j++) { + q->sbal[j] = *sbals_array++; + WARN_ON((unsigned long)q->sbal[j] & 0xff); + } + + /* fill in slib */ + if (i > 0) { + prev = (q->is_input_q) ? irq_ptr->input_qs[i - 1] + : irq_ptr->output_qs[i - 1]; + prev->slib->nsliba = (unsigned long)q->slib; + } + + q->slib->sla = (unsigned long)q->sl; + q->slib->slsba = (unsigned long)&q->slsb.val[0]; + + /* fill in sl */ + for (j = 0; j < QDIO_MAX_BUFFERS_PER_Q; j++) + q->sl->element[j].sbal = (unsigned long)q->sbal[j]; + + QDIO_DBF_TEXT2(0, setup, "sl-sb-b0"); + QDIO_DBF_HEX2(0, setup, q->sl, sizeof(void *)); + QDIO_DBF_HEX2(0, setup, &q->slsb, sizeof(void *)); + QDIO_DBF_HEX2(0, setup, q->sbal, sizeof(void *)); +} + +static void setup_queues(struct qdio_irq *irq_ptr, + struct qdio_initialize *qdio_init) +{ + char dbf_text[20]; + struct qdio_q *q; + void **input_sbal_array = qdio_init->input_sbal_addr_array; + void **output_sbal_array = qdio_init->output_sbal_addr_array; + int i; + + sprintf(dbf_text, "qfqs%4x", qdio_init->cdev->private->schid.sch_no); + QDIO_DBF_TEXT0(0, setup, dbf_text); + + for_each_input_queue(irq_ptr, q, i) { + sprintf(dbf_text, "in-q%4x", i); + setup_queues_misc(q, irq_ptr, qdio_init->input_handler, i); + + q->is_input_q = 1; + spin_lock_init(&q->u.in.lock); + setup_storage_lists(q, irq_ptr, input_sbal_array, dbf_text, i); + input_sbal_array += QDIO_MAX_BUFFERS_PER_Q; + + if (is_thinint_irq(irq_ptr)) + tasklet_init(&q->tasklet, tiqdio_inbound_processing, + (unsigned long) q); + else + tasklet_init(&q->tasklet, qdio_inbound_processing, + (unsigned long) q); + } + + for_each_output_queue(irq_ptr, q, i) { + sprintf(dbf_text, "outq%4x", i); + setup_queues_misc(q, irq_ptr, qdio_init->output_handler, i); + + q->is_input_q = 0; + setup_storage_lists(q, irq_ptr, output_sbal_array, + dbf_text, i); + output_sbal_array += QDIO_MAX_BUFFERS_PER_Q; + + tasklet_init(&q->tasklet, qdio_outbound_processing, + (unsigned long) q); + setup_timer(&q->u.out.timer, (void(*)(unsigned long)) + &qdio_outbound_timer, (unsigned long)q); + } +} + +static void process_ac_flags(struct qdio_irq *irq_ptr, unsigned char qdioac) +{ + if (qdioac & AC1_SIGA_INPUT_NEEDED) + irq_ptr->siga_flag.input = 1; + if (qdioac & AC1_SIGA_OUTPUT_NEEDED) + irq_ptr->siga_flag.output = 1; + if (qdioac & AC1_SIGA_SYNC_NEEDED) + irq_ptr->siga_flag.sync = 1; + if (qdioac & AC1_AUTOMATIC_SYNC_ON_THININT) + irq_ptr->siga_flag.no_sync_ti = 1; + if (qdioac & AC1_AUTOMATIC_SYNC_ON_OUT_PCI) + irq_ptr->siga_flag.no_sync_out_pci = 1; + + if (irq_ptr->siga_flag.no_sync_out_pci && + irq_ptr->siga_flag.no_sync_ti) + irq_ptr->siga_flag.no_sync_out_ti = 1; +} + +static void check_and_setup_qebsm(struct qdio_irq *irq_ptr, + unsigned char qdioac, unsigned long token) +{ + char dbf_text[15]; + + if (!(irq_ptr->qib.rflags & QIB_RFLAGS_ENABLE_QEBSM)) + goto no_qebsm; + if (!(qdioac & AC1_SC_QEBSM_AVAILABLE) || + (!(qdioac & AC1_SC_QEBSM_ENABLED))) + goto no_qebsm; + + irq_ptr->sch_token = token; + + QDIO_DBF_TEXT0(0, setup, "V=V:1"); + sprintf(dbf_text, "%8lx", irq_ptr->sch_token); + QDIO_DBF_TEXT0(0, setup, dbf_text); + return; + +no_qebsm: + irq_ptr->sch_token = 0; + irq_ptr->qib.rflags &= ~QIB_RFLAGS_ENABLE_QEBSM; + QDIO_DBF_TEXT0(0, setup, "noV=V"); +} + +static int __get_ssqd_info(struct qdio_irq *irq_ptr) +{ + struct chsc_ssqd_area *ssqd; + int rc; + + QDIO_DBF_TEXT0(0, setup, "getssqd"); + ssqd = (struct chsc_ssqd_area *)irq_ptr->chsc_page; + memset(ssqd, 0, PAGE_SIZE); + + ssqd->request = (struct chsc_header) { + .length = 0x0010, + .code = 0x0024, + }; + ssqd->first_sch = irq_ptr->schid.sch_no; + ssqd->last_sch = irq_ptr->schid.sch_no; + ssqd->ssid = irq_ptr->schid.ssid; + + if (chsc(ssqd)) + return -EIO; + rc = chsc_error_from_response(ssqd->response.code); + if (rc) + return rc; + + if (!(ssqd->qdio_ssqd.flags & CHSC_FLAG_QDIO_CAPABILITY) || + !(ssqd->qdio_ssqd.flags & CHSC_FLAG_VALIDITY) || + (ssqd->qdio_ssqd.sch != irq_ptr->schid.sch_no)) + return -EINVAL; + + memcpy(&irq_ptr->ssqd_desc, &ssqd->qdio_ssqd, + sizeof(struct qdio_ssqd_desc)); + return 0; +} + +void qdio_setup_ssqd_info(struct qdio_irq *irq_ptr) +{ + unsigned char qdioac; + char dbf_text[15]; + int rc; + + rc = __get_ssqd_info(irq_ptr); + if (rc) { + QDIO_DBF_TEXT2(0, setup, "ssqdasig"); + sprintf(dbf_text, "schno%x", irq_ptr->schid.sch_no); + QDIO_DBF_TEXT2(0, setup, dbf_text); + sprintf(dbf_text, "rc:%d", rc); + QDIO_DBF_TEXT2(0, setup, dbf_text); + /* all flags set, worst case */ + qdioac = AC1_SIGA_INPUT_NEEDED | AC1_SIGA_OUTPUT_NEEDED | + AC1_SIGA_SYNC_NEEDED; + } else + qdioac = irq_ptr->ssqd_desc.qdioac1; + + check_and_setup_qebsm(irq_ptr, qdioac, irq_ptr->ssqd_desc.sch_token); + process_ac_flags(irq_ptr, qdioac); + + sprintf(dbf_text, "qdioac%2x", qdioac); + QDIO_DBF_TEXT2(0, setup, dbf_text); +} + +void qdio_release_memory(struct qdio_irq *irq_ptr) +{ + struct qdio_q *q; + int i; + + /* + * Must check queue array manually since irq_ptr->nr_input_queues / + * irq_ptr->nr_input_queues may not yet be set. + */ + for (i = 0; i < QDIO_MAX_QUEUES_PER_IRQ; i++) { + q = irq_ptr->input_qs[i]; + if (q) { + free_page((unsigned long) q->slib); + kmem_cache_free(qdio_q_cache, q); + } + } + for (i = 0; i < QDIO_MAX_QUEUES_PER_IRQ; i++) { + q = irq_ptr->output_qs[i]; + if (q) { + free_page((unsigned long) q->slib); + kmem_cache_free(qdio_q_cache, q); + } + } + kfree(irq_ptr->qdr); + free_page(irq_ptr->chsc_page); + free_page((unsigned long) irq_ptr); +} + +static void __qdio_allocate_fill_qdr(struct qdio_irq *irq_ptr, + struct qdio_q **irq_ptr_qs, + int i, int nr) +{ + irq_ptr->qdr->qdf0[i + nr].sliba = + (unsigned long)irq_ptr_qs[i]->slib; + + irq_ptr->qdr->qdf0[i + nr].sla = + (unsigned long)irq_ptr_qs[i]->sl; + + irq_ptr->qdr->qdf0[i + nr].slsba = + (unsigned long)&irq_ptr_qs[i]->slsb.val[0]; + + irq_ptr->qdr->qdf0[i + nr].akey = PAGE_DEFAULT_KEY; + irq_ptr->qdr->qdf0[i + nr].bkey = PAGE_DEFAULT_KEY; + irq_ptr->qdr->qdf0[i + nr].ckey = PAGE_DEFAULT_KEY; + irq_ptr->qdr->qdf0[i + nr].dkey = PAGE_DEFAULT_KEY; +} + +static void setup_qdr(struct qdio_irq *irq_ptr, + struct qdio_initialize *qdio_init) +{ + int i; + + irq_ptr->qdr->qfmt = qdio_init->q_format; + irq_ptr->qdr->iqdcnt = qdio_init->no_input_qs; + irq_ptr->qdr->oqdcnt = qdio_init->no_output_qs; + irq_ptr->qdr->iqdsz = sizeof(struct qdesfmt0) / 4; /* size in words */ + irq_ptr->qdr->oqdsz = sizeof(struct qdesfmt0) / 4; + irq_ptr->qdr->qiba = (unsigned long)&irq_ptr->qib; + irq_ptr->qdr->qkey = PAGE_DEFAULT_KEY; + + for (i = 0; i < qdio_init->no_input_qs; i++) + __qdio_allocate_fill_qdr(irq_ptr, irq_ptr->input_qs, i, 0); + + for (i = 0; i < qdio_init->no_output_qs; i++) + __qdio_allocate_fill_qdr(irq_ptr, irq_ptr->output_qs, i, + qdio_init->no_input_qs); +} + +static void setup_qib(struct qdio_irq *irq_ptr, + struct qdio_initialize *init_data) +{ + if (qebsm_possible()) + irq_ptr->qib.rflags |= QIB_RFLAGS_ENABLE_QEBSM; + + irq_ptr->qib.qfmt = init_data->q_format; + if (init_data->no_input_qs) + irq_ptr->qib.isliba = + (unsigned long)(irq_ptr->input_qs[0]->slib); + if (init_data->no_output_qs) + irq_ptr->qib.osliba = + (unsigned long)(irq_ptr->output_qs[0]->slib); + memcpy(irq_ptr->qib.ebcnam, init_data->adapter_name, 8); +} + +int qdio_setup_irq(struct qdio_initialize *init_data) +{ + struct ciw *ciw; + struct qdio_irq *irq_ptr = init_data->cdev->private->qdio_data; + int rc; + + memset(irq_ptr, 0, ((char *)&irq_ptr->qdr) - ((char *)irq_ptr)); + /* wipes qib.ac, required by ar7063 */ + memset(irq_ptr->qdr, 0, sizeof(struct qdr)); + + irq_ptr->int_parm = init_data->int_parm; + irq_ptr->nr_input_qs = init_data->no_input_qs; + irq_ptr->nr_output_qs = init_data->no_output_qs; + + irq_ptr->schid = ccw_device_get_subchannel_id(init_data->cdev); + irq_ptr->cdev = init_data->cdev; + setup_queues(irq_ptr, init_data); + + setup_qib(irq_ptr, init_data); + qdio_setup_thinint(irq_ptr); + set_impl_params(irq_ptr, init_data->qib_param_field_format, + init_data->qib_param_field, + init_data->input_slib_elements, + init_data->output_slib_elements); + + /* fill input and output descriptors */ + setup_qdr(irq_ptr, init_data); + + /* qdr, qib, sls, slsbs, slibs, sbales are filled now */ + + /* get qdio commands */ + ciw = ccw_device_get_ciw(init_data->cdev, CIW_TYPE_EQUEUE); + if (!ciw) { + QDIO_DBF_TEXT2(1, setup, "no eq"); + rc = -EINVAL; + goto out_err; + } + irq_ptr->equeue = *ciw; + + ciw = ccw_device_get_ciw(init_data->cdev, CIW_TYPE_AQUEUE); + if (!ciw) { + QDIO_DBF_TEXT2(1, setup, "no aq"); + rc = -EINVAL; + goto out_err; + } + irq_ptr->aqueue = *ciw; + + /* set new interrupt handler */ + irq_ptr->orig_handler = init_data->cdev->handler; + init_data->cdev->handler = qdio_int_handler; + return 0; +out_err: + qdio_release_memory(irq_ptr); + return rc; +} + +void qdio_print_subchannel_info(struct qdio_irq *irq_ptr, + struct ccw_device *cdev) +{ + char s[80]; + + sprintf(s, "%s ", cdev->dev.bus_id); + + switch (irq_ptr->qib.qfmt) { + case QDIO_QETH_QFMT: + sprintf(s + strlen(s), "OSADE "); + break; + case QDIO_ZFCP_QFMT: + sprintf(s + strlen(s), "ZFCP "); + break; + case QDIO_IQDIO_QFMT: + sprintf(s + strlen(s), "HiperSockets "); + break; + } + sprintf(s + strlen(s), "using: "); + + if (!is_thinint_irq(irq_ptr)) + sprintf(s + strlen(s), "no"); + sprintf(s + strlen(s), "AdapterInterrupts "); + if (!(irq_ptr->sch_token != 0)) + sprintf(s + strlen(s), "no"); + sprintf(s + strlen(s), "QEBSM "); + if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED)) + sprintf(s + strlen(s), "no"); + sprintf(s + strlen(s), "OutboundPCI "); + if (!css_general_characteristics.aif_tdd) + sprintf(s + strlen(s), "no"); + sprintf(s + strlen(s), "TDD\n"); + printk(KERN_INFO "qdio: %s", s); + + memset(s, 0, sizeof(s)); + sprintf(s, "%s SIGA required: ", cdev->dev.bus_id); + if (irq_ptr->siga_flag.input) + sprintf(s + strlen(s), "Read "); + if (irq_ptr->siga_flag.output) + sprintf(s + strlen(s), "Write "); + if (irq_ptr->siga_flag.sync) + sprintf(s + strlen(s), "Sync "); + if (!irq_ptr->siga_flag.no_sync_ti) + sprintf(s + strlen(s), "SyncAI "); + if (!irq_ptr->siga_flag.no_sync_out_ti) + sprintf(s + strlen(s), "SyncOutAI "); + if (!irq_ptr->siga_flag.no_sync_out_pci) + sprintf(s + strlen(s), "SyncOutPCI"); + sprintf(s + strlen(s), "\n"); + printk(KERN_INFO "qdio: %s", s); +} + +int __init qdio_setup_init(void) +{ + char dbf_text[15]; + + qdio_q_cache = kmem_cache_create("qdio_q", sizeof(struct qdio_q), + 256, 0, NULL); + if (!qdio_q_cache) + return -ENOMEM; + + /* Check for OSA/FCP thin interrupts (bit 67). */ + sprintf(dbf_text, "thini%1x", + (css_general_characteristics.aif_osa) ? 1 : 0); + QDIO_DBF_TEXT0(0, setup, dbf_text); + + /* Check for QEBSM support in general (bit 58). */ + sprintf(dbf_text, "cssQBS:%1x", + (qebsm_possible()) ? 1 : 0); + QDIO_DBF_TEXT0(0, setup, dbf_text); + return 0; +} + +void __exit qdio_setup_exit(void) +{ + kmem_cache_destroy(qdio_q_cache); +} diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c new file mode 100644 index 000000000000..9291a771d812 --- /dev/null +++ b/drivers/s390/cio/qdio_thinint.c @@ -0,0 +1,380 @@ +/* + * linux/drivers/s390/cio/thinint_qdio.c + * + * thin interrupt support for qdio + * + * Copyright 2000-2008 IBM Corp. + * Author(s): Utz Bacher + * Cornelia Huck + * Jan Glauber + */ +#include +#include +#include +#include +#include +#include + +#include "cio.h" +#include "ioasm.h" +#include "qdio.h" +#include "qdio_debug.h" +#include "qdio_perf.h" + +/* + * Restriction: only 63 iqdio subchannels would have its own indicator, + * after that, subsequent subchannels share one indicator + */ +#define TIQDIO_NR_NONSHARED_IND 63 +#define TIQDIO_NR_INDICATORS (TIQDIO_NR_NONSHARED_IND + 1) +#define TIQDIO_SHARED_IND 63 + +/* list of thin interrupt input queues */ +static LIST_HEAD(tiq_list); + +/* adapter local summary indicator */ +static unsigned char *tiqdio_alsi; + +/* device state change indicators */ +struct indicator_t { + u32 ind; /* u32 because of compare-and-swap performance */ + atomic_t count; /* use count, 0 or 1 for non-shared indicators */ +}; +static struct indicator_t *q_indicators; + +static void tiqdio_tasklet_fn(unsigned long data); +static DECLARE_TASKLET(tiqdio_tasklet, tiqdio_tasklet_fn, 0); + +static int css_qdio_omit_svs; + +static inline unsigned long do_clear_global_summary(void) +{ + register unsigned long __fn asm("1") = 3; + register unsigned long __tmp asm("2"); + register unsigned long __time asm("3"); + + asm volatile( + " .insn rre,0xb2650000,2,0" + : "+d" (__fn), "=d" (__tmp), "=d" (__time)); + return __time; +} + +/* returns addr for the device state change indicator */ +static u32 *get_indicator(void) +{ + int i; + + for (i = 0; i < TIQDIO_NR_NONSHARED_IND; i++) + if (!atomic_read(&q_indicators[i].count)) { + atomic_set(&q_indicators[i].count, 1); + return &q_indicators[i].ind; + } + + /* use the shared indicator */ + atomic_inc(&q_indicators[TIQDIO_SHARED_IND].count); + return &q_indicators[TIQDIO_SHARED_IND].ind; +} + +static void put_indicator(u32 *addr) +{ + int i; + + if (!addr) + return; + i = ((unsigned long)addr - (unsigned long)q_indicators) / + sizeof(struct indicator_t); + atomic_dec(&q_indicators[i].count); +} + +void tiqdio_add_input_queues(struct qdio_irq *irq_ptr) +{ + struct qdio_q *q; + int i; + + /* No TDD facility? If we must use SIGA-s we can also omit SVS. */ + if (!css_qdio_omit_svs && irq_ptr->siga_flag.sync) + css_qdio_omit_svs = 1; + + for_each_input_queue(irq_ptr, q, i) { + list_add_rcu(&q->entry, &tiq_list); + synchronize_rcu(); + } + xchg(irq_ptr->dsci, 1); + tasklet_schedule(&tiqdio_tasklet); +} + +/* + * we cannot stop the tiqdio tasklet here since it is for all + * thinint qdio devices and it must run as long as there is a + * thinint device left + */ +void tiqdio_remove_input_queues(struct qdio_irq *irq_ptr) +{ + struct qdio_q *q; + int i; + + for_each_input_queue(irq_ptr, q, i) { + list_del_rcu(&q->entry); + synchronize_rcu(); + } +} + +static inline int tiqdio_inbound_q_done(struct qdio_q *q) +{ + unsigned char state; + + if (!atomic_read(&q->nr_buf_used)) + return 1; + + qdio_siga_sync_q(q); + get_buf_state(q, q->first_to_check, &state); + + if (state == SLSB_P_INPUT_PRIMED) + /* more work coming */ + return 0; + return 1; +} + +static inline int shared_ind(struct qdio_irq *irq_ptr) +{ + return irq_ptr->dsci == &q_indicators[TIQDIO_SHARED_IND].ind; +} + +static void __tiqdio_inbound_processing(struct qdio_q *q) +{ + qdio_perf_stat_inc(&perf_stats.thinint_inbound); + qdio_sync_after_thinint(q); + + /* + * Maybe we have work on our outbound queues... at least + * we have to check the PCI capable queues. + */ + qdio_check_outbound_after_thinint(q); + +again: + if (!qdio_inbound_q_moved(q)) + return; + + qdio_kick_inbound_handler(q); + + if (!tiqdio_inbound_q_done(q)) { + qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop); + goto again; + } + + qdio_stop_polling(q); + /* + * We need to check again to not lose initiative after + * resetting the ACK state. + */ + if (!tiqdio_inbound_q_done(q)) { + qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop2); + goto again; + } +} + +void tiqdio_inbound_processing(unsigned long data) +{ + struct qdio_q *q = (struct qdio_q *)data; + + __tiqdio_inbound_processing(q); +} + +/* check for work on all inbound thinint queues */ +static void tiqdio_tasklet_fn(unsigned long data) +{ + struct qdio_q *q; + + qdio_perf_stat_inc(&perf_stats.tasklet_thinint); +again: + + /* protect tiq_list entries, only changed in activate or shutdown */ + rcu_read_lock(); + + list_for_each_entry_rcu(q, &tiq_list, entry) + /* only process queues from changed sets */ + if (*q->irq_ptr->dsci) { + + /* only clear it if the indicator is non-shared */ + if (!shared_ind(q->irq_ptr)) + xchg(q->irq_ptr->dsci, 0); + /* + * don't call inbound processing directly since + * that could starve other thinint queues + */ + tasklet_schedule(&q->tasklet); + } + + rcu_read_unlock(); + + /* + * if we used the shared indicator clear it now after all queues + * were processed + */ + if (atomic_read(&q_indicators[TIQDIO_SHARED_IND].count)) { + xchg(&q_indicators[TIQDIO_SHARED_IND].ind, 0); + + /* prevent racing */ + if (*tiqdio_alsi) + xchg(&q_indicators[TIQDIO_SHARED_IND].ind, 1); + } + + /* check for more work */ + if (*tiqdio_alsi) { + xchg(tiqdio_alsi, 0); + qdio_perf_stat_inc(&perf_stats.tasklet_thinint_loop); + goto again; + } +} + +/** + * tiqdio_thinint_handler - thin interrupt handler for qdio + * @ind: pointer to adapter local summary indicator + * @drv_data: NULL + */ +static void tiqdio_thinint_handler(void *ind, void *drv_data) +{ + qdio_perf_stat_inc(&perf_stats.thin_int); + + /* + * SVS only when needed: issue SVS to benefit from iqdio interrupt + * avoidance (SVS clears adapter interrupt suppression overwrite) + */ + if (!css_qdio_omit_svs) + do_clear_global_summary(); + + /* + * reset local summary indicator (tiqdio_alsi) to stop adapter + * interrupts for now, the tasklet will clean all dsci's + */ + xchg((u8 *)ind, 0); + tasklet_hi_schedule(&tiqdio_tasklet); +} + +static int set_subchannel_ind(struct qdio_irq *irq_ptr, int reset) +{ + struct scssc_area *scssc_area; + char dbf_text[15]; + void *ptr; + int rc; + + scssc_area = (struct scssc_area *)irq_ptr->chsc_page; + memset(scssc_area, 0, PAGE_SIZE); + + if (reset) { + scssc_area->summary_indicator_addr = 0; + scssc_area->subchannel_indicator_addr = 0; + } else { + scssc_area->summary_indicator_addr = virt_to_phys(tiqdio_alsi); + scssc_area->subchannel_indicator_addr = + virt_to_phys(irq_ptr->dsci); + } + + scssc_area->request = (struct chsc_header) { + .length = 0x0fe0, + .code = 0x0021, + }; + scssc_area->operation_code = 0; + scssc_area->ks = PAGE_DEFAULT_KEY; + scssc_area->kc = PAGE_DEFAULT_KEY; + scssc_area->isc = QDIO_AIRQ_ISC; + scssc_area->schid = irq_ptr->schid; + + /* enable the time delay disablement facility */ + if (css_general_characteristics.aif_tdd) + scssc_area->word_with_d_bit = 0x10000000; + + rc = chsc(scssc_area); + if (rc) + return -EIO; + + rc = chsc_error_from_response(scssc_area->response.code); + if (rc) { + sprintf(dbf_text, "sidR%4x", scssc_area->response.code); + QDIO_DBF_TEXT1(0, trace, dbf_text); + QDIO_DBF_TEXT1(0, setup, dbf_text); + ptr = &scssc_area->response; + QDIO_DBF_HEX2(1, setup, &ptr, QDIO_DBF_SETUP_LEN); + return rc; + } + + QDIO_DBF_TEXT2(0, setup, "setscind"); + QDIO_DBF_HEX2(0, setup, &scssc_area->summary_indicator_addr, + sizeof(unsigned long)); + QDIO_DBF_HEX2(0, setup, &scssc_area->subchannel_indicator_addr, + sizeof(unsigned long)); + return 0; +} + +/* allocate non-shared indicators and shared indicator */ +int __init tiqdio_allocate_memory(void) +{ + q_indicators = kzalloc(sizeof(struct indicator_t) * TIQDIO_NR_INDICATORS, + GFP_KERNEL); + if (!q_indicators) + return -ENOMEM; + return 0; +} + +void tiqdio_free_memory(void) +{ + kfree(q_indicators); +} + +int __init tiqdio_register_thinints(void) +{ + char dbf_text[20]; + + isc_register(QDIO_AIRQ_ISC); + tiqdio_alsi = s390_register_adapter_interrupt(&tiqdio_thinint_handler, + NULL, QDIO_AIRQ_ISC); + if (IS_ERR(tiqdio_alsi)) { + sprintf(dbf_text, "regthn%lx", PTR_ERR(tiqdio_alsi)); + QDIO_DBF_TEXT0(0, setup, dbf_text); + tiqdio_alsi = NULL; + isc_unregister(QDIO_AIRQ_ISC); + return -ENOMEM; + } + return 0; +} + +int qdio_establish_thinint(struct qdio_irq *irq_ptr) +{ + if (!is_thinint_irq(irq_ptr)) + return 0; + + /* Check for aif time delay disablement. If installed, + * omit SVS even under LPAR + */ + if (css_general_characteristics.aif_tdd) + css_qdio_omit_svs = 1; + return set_subchannel_ind(irq_ptr, 0); +} + +void qdio_setup_thinint(struct qdio_irq *irq_ptr) +{ + if (!is_thinint_irq(irq_ptr)) + return; + irq_ptr->dsci = get_indicator(); + QDIO_DBF_HEX1(0, setup, &irq_ptr->dsci, sizeof(void *)); +} + +void qdio_shutdown_thinint(struct qdio_irq *irq_ptr) +{ + if (!is_thinint_irq(irq_ptr)) + return; + + /* reset adapter interrupt indicators */ + put_indicator(irq_ptr->dsci); + set_subchannel_ind(irq_ptr, 1); +} + +void __exit tiqdio_unregister_thinints(void) +{ + tasklet_disable(&tiqdio_tasklet); + + if (tiqdio_alsi) { + s390_unregister_adapter_interrupt(tiqdio_alsi, QDIO_AIRQ_ISC); + isc_unregister(QDIO_AIRQ_ISC); + } +} diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h index 699ac11debd8..1895dbb553cd 100644 --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -239,11 +239,6 @@ static inline int qeth_is_ipa_enabled(struct qeth_ipa_info *ipa, /*not used unless the microcode gets patched*/ #define QETH_PCI_TIMER_VALUE(card) 3 -#define QETH_MIN_INPUT_THRESHOLD 1 -#define QETH_MAX_INPUT_THRESHOLD 500 -#define QETH_MIN_OUTPUT_THRESHOLD 1 -#define QETH_MAX_OUTPUT_THRESHOLD 300 - /* priority queing */ #define QETH_PRIOQ_DEFAULT QETH_NO_PRIO_QUEUEING #define QETH_DEFAULT_QUEUE 2 @@ -811,17 +806,14 @@ int qeth_send_ipa_cmd(struct qeth_card *, struct qeth_cmd_buffer *, struct qeth_cmd_buffer *qeth_get_ipacmd_buffer(struct qeth_card *, enum qeth_ipa_cmds, enum qeth_prot_versions); int qeth_query_setadapterparms(struct qeth_card *); -int qeth_check_qdio_errors(struct qdio_buffer *, unsigned int, - unsigned int, const char *); +int qeth_check_qdio_errors(struct qdio_buffer *, unsigned int, const char *); void qeth_queue_input_buffer(struct qeth_card *, int); struct sk_buff *qeth_core_get_next_skb(struct qeth_card *, struct qdio_buffer *, struct qdio_buffer_element **, int *, struct qeth_hdr **); void qeth_schedule_recovery(struct qeth_card *); void qeth_qdio_output_handler(struct ccw_device *, unsigned int, - unsigned int, unsigned int, - unsigned int, int, int, - unsigned long); + int, int, int, unsigned long); void qeth_clear_ipacmd_list(struct qeth_card *); int qeth_qdio_clear_card(struct qeth_card *, int); void qeth_clear_working_pool_list(struct qeth_card *); diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 0ac54dc638c2..c3ad89e302bd 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2073,7 +2073,7 @@ static void qeth_create_qib_param_field_blkt(struct qeth_card *card, static int qeth_qdio_activate(struct qeth_card *card) { QETH_DBF_TEXT(SETUP, 3, "qdioact"); - return qdio_activate(CARD_DDEV(card), 0); + return qdio_activate(CARD_DDEV(card)); } static int qeth_dm_act(struct qeth_card *card) @@ -2349,16 +2349,11 @@ int qeth_init_qdio_queues(struct qeth_card *card) card->qdio.in_q->next_buf_to_init = card->qdio.in_buf_pool.buf_count - 1; rc = do_QDIO(CARD_DDEV(card), QDIO_FLAG_SYNC_INPUT, 0, 0, - card->qdio.in_buf_pool.buf_count - 1, NULL); + card->qdio.in_buf_pool.buf_count - 1); if (rc) { QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); return rc; } - rc = qdio_synchronize(CARD_DDEV(card), QDIO_FLAG_SYNC_INPUT, 0); - if (rc) { - QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc); - return rc; - } /* outbound queue */ for (i = 0; i < card->qdio.no_out_queues; ++i) { memset(card->qdio.out_qs[i]->qdio_bufs, 0, @@ -2559,9 +2554,9 @@ int qeth_query_setadapterparms(struct qeth_card *card) EXPORT_SYMBOL_GPL(qeth_query_setadapterparms); int qeth_check_qdio_errors(struct qdio_buffer *buf, unsigned int qdio_error, - unsigned int siga_error, const char *dbftext) + const char *dbftext) { - if (qdio_error || siga_error) { + if (qdio_error) { QETH_DBF_TEXT(TRACE, 2, dbftext); QETH_DBF_TEXT(QERR, 2, dbftext); QETH_DBF_TEXT_(QERR, 2, " F15=%02X", @@ -2569,7 +2564,6 @@ int qeth_check_qdio_errors(struct qdio_buffer *buf, unsigned int qdio_error, QETH_DBF_TEXT_(QERR, 2, " F14=%02X", buf->element[14].flags & 0xff); QETH_DBF_TEXT_(QERR, 2, " qerr=%X", qdio_error); - QETH_DBF_TEXT_(QERR, 2, " serr=%X", siga_error); return 1; } return 0; @@ -2622,9 +2616,8 @@ void qeth_queue_input_buffer(struct qeth_card *card, int index) card->perf_stats.inbound_do_qdio_start_time = qeth_get_micros(); } - rc = do_QDIO(CARD_DDEV(card), - QDIO_FLAG_SYNC_INPUT | QDIO_FLAG_UNDER_INTERRUPT, - 0, queue->next_buf_to_init, count, NULL); + rc = do_QDIO(CARD_DDEV(card), QDIO_FLAG_SYNC_INPUT, 0, + queue->next_buf_to_init, count); if (card->options.performance_stats) card->perf_stats.inbound_do_qdio_time += qeth_get_micros() - @@ -2643,14 +2636,13 @@ void qeth_queue_input_buffer(struct qeth_card *card, int index) EXPORT_SYMBOL_GPL(qeth_queue_input_buffer); static int qeth_handle_send_error(struct qeth_card *card, - struct qeth_qdio_out_buffer *buffer, unsigned int qdio_err, - unsigned int siga_err) + struct qeth_qdio_out_buffer *buffer, unsigned int qdio_err) { int sbalf15 = buffer->buffer->element[15].flags & 0xff; - int cc = siga_err & 3; + int cc = qdio_err & 3; QETH_DBF_TEXT(TRACE, 6, "hdsnderr"); - qeth_check_qdio_errors(buffer->buffer, qdio_err, siga_err, "qouterr"); + qeth_check_qdio_errors(buffer->buffer, qdio_err, "qouterr"); switch (cc) { case 0: if (qdio_err) { @@ -2662,7 +2654,7 @@ static int qeth_handle_send_error(struct qeth_card *card, } return QETH_SEND_ERROR_NONE; case 2: - if (siga_err & QDIO_SIGA_ERROR_B_BIT_SET) { + if (qdio_err & QDIO_ERROR_SIGA_BUSY) { QETH_DBF_TEXT(TRACE, 1, "SIGAcc2B"); QETH_DBF_TEXT_(TRACE, 1, "%s", CARD_BUS_ID(card)); return QETH_SEND_ERROR_KICK_IT; @@ -2758,8 +2750,8 @@ static int qeth_flush_buffers_on_no_pci(struct qeth_qdio_out_q *queue) return 0; } -static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int under_int, - int index, int count) +static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index, + int count) { struct qeth_qdio_out_buffer *buf; int rc; @@ -2807,12 +2799,10 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int under_int, qeth_get_micros(); } qdio_flags = QDIO_FLAG_SYNC_OUTPUT; - if (under_int) - qdio_flags |= QDIO_FLAG_UNDER_INTERRUPT; if (atomic_read(&queue->set_pci_flags_count)) qdio_flags |= QDIO_FLAG_PCI_OUT; rc = do_QDIO(CARD_DDEV(queue->card), qdio_flags, - queue->queue_no, index, count, NULL); + queue->queue_no, index, count); if (queue->card->options.performance_stats) queue->card->perf_stats.outbound_do_qdio_time += qeth_get_micros() - @@ -2866,16 +2856,15 @@ static void qeth_check_outbound_queue(struct qeth_qdio_out_q *queue) queue->card->perf_stats.bufs_sent_pack += flush_cnt; if (flush_cnt) - qeth_flush_buffers(queue, 1, index, flush_cnt); + qeth_flush_buffers(queue, index, flush_cnt); atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); } } } -void qeth_qdio_output_handler(struct ccw_device *ccwdev, unsigned int status, - unsigned int qdio_error, unsigned int siga_error, - unsigned int __queue, int first_element, int count, - unsigned long card_ptr) +void qeth_qdio_output_handler(struct ccw_device *ccwdev, + unsigned int qdio_error, int __queue, int first_element, + int count, unsigned long card_ptr) { struct qeth_card *card = (struct qeth_card *) card_ptr; struct qeth_qdio_out_q *queue = card->qdio.out_qs[__queue]; @@ -2883,15 +2872,12 @@ void qeth_qdio_output_handler(struct ccw_device *ccwdev, unsigned int status, int i; QETH_DBF_TEXT(TRACE, 6, "qdouhdl"); - if (status & QDIO_STATUS_LOOK_FOR_ERROR) { - if (status & QDIO_STATUS_ACTIVATE_CHECK_CONDITION) { - QETH_DBF_TEXT(TRACE, 2, "achkcond"); - QETH_DBF_TEXT_(TRACE, 2, "%s", CARD_BUS_ID(card)); - QETH_DBF_TEXT_(TRACE, 2, "%08x", status); - netif_stop_queue(card->dev); - qeth_schedule_recovery(card); - return; - } + if (qdio_error & QDIO_ERROR_ACTIVATE_CHECK_CONDITION) { + QETH_DBF_TEXT(TRACE, 2, "achkcond"); + QETH_DBF_TEXT_(TRACE, 2, "%s", CARD_BUS_ID(card)); + netif_stop_queue(card->dev); + qeth_schedule_recovery(card); + return; } if (card->options.performance_stats) { card->perf_stats.outbound_handler_cnt++; @@ -2901,8 +2887,7 @@ void qeth_qdio_output_handler(struct ccw_device *ccwdev, unsigned int status, for (i = first_element; i < (first_element + count); ++i) { buffer = &queue->bufs[i % QDIO_MAX_BUFFERS_PER_Q]; /*we only handle the KICK_IT error by doing a recovery */ - if (qeth_handle_send_error(card, buffer, - qdio_error, siga_error) + if (qeth_handle_send_error(card, buffer, qdio_error) == QETH_SEND_ERROR_KICK_IT){ netif_stop_queue(card->dev); qeth_schedule_recovery(card); @@ -3164,11 +3149,11 @@ int qeth_do_send_packet_fast(struct qeth_card *card, atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); if (ctx == NULL) { qeth_fill_buffer(queue, buffer, skb); - qeth_flush_buffers(queue, 0, index, 1); + qeth_flush_buffers(queue, index, 1); } else { flush_cnt = qeth_eddp_fill_buffer(queue, ctx, index); WARN_ON(buffers_needed != flush_cnt); - qeth_flush_buffers(queue, 0, index, flush_cnt); + qeth_flush_buffers(queue, index, flush_cnt); } return 0; out: @@ -3221,8 +3206,8 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue, * again */ if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY){ - qeth_flush_buffers(queue, 0, - start_index, flush_count); + qeth_flush_buffers(queue, start_index, + flush_count); atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); return -EBUSY; @@ -3253,7 +3238,7 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue, flush_count += tmp; out: if (flush_count) - qeth_flush_buffers(queue, 0, start_index, flush_count); + qeth_flush_buffers(queue, start_index, flush_count); else if (!atomic_read(&queue->set_pci_flags_count)) atomic_xchg(&queue->state, QETH_OUT_Q_LOCKED_FLUSH); /* @@ -3274,7 +3259,7 @@ out: if (!flush_count && !atomic_read(&queue->set_pci_flags_count)) flush_count += qeth_flush_buffers_on_no_pci(queue); if (flush_count) - qeth_flush_buffers(queue, 0, start_index, flush_count); + qeth_flush_buffers(queue, start_index, flush_count); } /* at this point the queue is UNLOCKED again */ if (queue->card->options.performance_stats && do_pack) @@ -3686,10 +3671,6 @@ static int qeth_qdio_establish(struct qeth_card *card) init_data.q_format = qeth_get_qdio_q_format(card); init_data.qib_param_field_format = 0; init_data.qib_param_field = qib_param_field; - init_data.min_input_threshold = QETH_MIN_INPUT_THRESHOLD; - init_data.max_input_threshold = QETH_MAX_INPUT_THRESHOLD; - init_data.min_output_threshold = QETH_MIN_OUTPUT_THRESHOLD; - init_data.max_output_threshold = QETH_MAX_OUTPUT_THRESHOLD; init_data.no_input_qs = 1; init_data.no_output_qs = card->qdio.no_out_queues; init_data.input_handler = card->discipline.input_handler; @@ -3751,8 +3732,9 @@ static int qeth_core_driver_group(const char *buf, struct device *root_dev, int qeth_core_hardsetup_card(struct qeth_card *card) { + struct qdio_ssqd_desc *qdio_ssqd; int retries = 3; - int mpno; + int mpno = 0; int rc; QETH_DBF_TEXT(SETUP, 2, "hrdsetup"); @@ -3784,7 +3766,10 @@ retry: QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc); return rc; } - mpno = qdio_get_ssqd_pct(CARD_DDEV(card)); + + qdio_ssqd = qdio_get_ssqd_desc(CARD_DDEV(card)); + if (qdio_ssqd) + mpno = qdio_ssqd->pcnt; if (mpno) mpno = min(mpno - 1, QETH_MAX_PORTNO); if (card->info.portno > mpno) { diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index f682f7b14480..3fbc3bdec0c5 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -726,8 +726,7 @@ tx_drop: } static void qeth_l2_qdio_input_handler(struct ccw_device *ccwdev, - unsigned int status, unsigned int qdio_err, - unsigned int siga_err, unsigned int queue, + unsigned int qdio_err, unsigned int queue, int first_element, int count, unsigned long card_ptr) { struct net_device *net_dev; @@ -742,23 +741,20 @@ static void qeth_l2_qdio_input_handler(struct ccw_device *ccwdev, card->perf_stats.inbound_cnt++; card->perf_stats.inbound_start_time = qeth_get_micros(); } - if (status & QDIO_STATUS_LOOK_FOR_ERROR) { - if (status & QDIO_STATUS_ACTIVATE_CHECK_CONDITION) { - QETH_DBF_TEXT(TRACE, 1, "qdinchk"); - QETH_DBF_TEXT_(TRACE, 1, "%s", CARD_BUS_ID(card)); - QETH_DBF_TEXT_(TRACE, 1, "%04X%04X", first_element, - count); - QETH_DBF_TEXT_(TRACE, 1, "%04X%04X", queue, status); - qeth_schedule_recovery(card); - return; - } + if (qdio_err & QDIO_ERROR_ACTIVATE_CHECK_CONDITION) { + QETH_DBF_TEXT(TRACE, 1, "qdinchk"); + QETH_DBF_TEXT_(TRACE, 1, "%s", CARD_BUS_ID(card)); + QETH_DBF_TEXT_(TRACE, 1, "%04X%04X", first_element, + count); + QETH_DBF_TEXT_(TRACE, 1, "%04X", queue); + qeth_schedule_recovery(card); + return; } for (i = first_element; i < (first_element + count); ++i) { index = i % QDIO_MAX_BUFFERS_PER_Q; buffer = &card->qdio.in_q->bufs[index]; - if (!((status & QDIO_STATUS_LOOK_FOR_ERROR) && - qeth_check_qdio_errors(buffer->buffer, - qdio_err, siga_err, "qinerr"))) + if (!(qdio_err && + qeth_check_qdio_errors(buffer->buffer, qdio_err, "qinerr"))) qeth_l2_process_inbound_buffer(card, buffer, index); /* clear buffer and give back to hardware */ qeth_put_buffer_pool_entry(card, buffer->pool_entry); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 06deaee50f6d..22f64aa6dd1f 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2939,8 +2939,7 @@ static int qeth_l3_setup_netdev(struct qeth_card *card) } static void qeth_l3_qdio_input_handler(struct ccw_device *ccwdev, - unsigned int status, unsigned int qdio_err, - unsigned int siga_err, unsigned int queue, int first_element, + unsigned int qdio_err, unsigned int queue, int first_element, int count, unsigned long card_ptr) { struct net_device *net_dev; @@ -2955,23 +2954,21 @@ static void qeth_l3_qdio_input_handler(struct ccw_device *ccwdev, card->perf_stats.inbound_cnt++; card->perf_stats.inbound_start_time = qeth_get_micros(); } - if (status & QDIO_STATUS_LOOK_FOR_ERROR) { - if (status & QDIO_STATUS_ACTIVATE_CHECK_CONDITION) { - QETH_DBF_TEXT(TRACE, 1, "qdinchk"); - QETH_DBF_TEXT_(TRACE, 1, "%s", CARD_BUS_ID(card)); - QETH_DBF_TEXT_(TRACE, 1, "%04X%04X", - first_element, count); - QETH_DBF_TEXT_(TRACE, 1, "%04X%04X", queue, status); - qeth_schedule_recovery(card); - return; - } + if (qdio_err & QDIO_ERROR_ACTIVATE_CHECK_CONDITION) { + QETH_DBF_TEXT(TRACE, 1, "qdinchk"); + QETH_DBF_TEXT_(TRACE, 1, "%s", CARD_BUS_ID(card)); + QETH_DBF_TEXT_(TRACE, 1, "%04X%04X", + first_element, count); + QETH_DBF_TEXT_(TRACE, 1, "%04X", queue); + qeth_schedule_recovery(card); + return; } for (i = first_element; i < (first_element + count); ++i) { index = i % QDIO_MAX_BUFFERS_PER_Q; buffer = &card->qdio.in_q->bufs[index]; - if (!((status & QDIO_STATUS_LOOK_FOR_ERROR) && + if (!(qdio_err && qeth_check_qdio_errors(buffer->buffer, - qdio_err, siga_err, "qinerr"))) + qdio_err, "qinerr"))) qeth_l3_process_inbound_buffer(card, buffer, index); /* clear buffer and give back to hardware */ qeth_put_buffer_pool_entry(card, buffer->pool_entry); diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c index 36169c6944fd..fca48b88fc53 100644 --- a/drivers/s390/scsi/zfcp_dbf.c +++ b/drivers/s390/scsi/zfcp_dbf.c @@ -297,15 +297,13 @@ void zfcp_hba_dbf_event_fsf_unsol(const char *tag, struct zfcp_adapter *adapter, /** * zfcp_hba_dbf_event_qdio - trace event for QDIO related failure * @adapter: adapter affected by this QDIO related event - * @status: as passed by qdio module * @qdio_error: as passed by qdio module - * @siga_error: as passed by qdio module * @sbal_index: first buffer with error condition, as passed by qdio module * @sbal_count: number of buffers affected, as passed by qdio module */ -void zfcp_hba_dbf_event_qdio(struct zfcp_adapter *adapter, unsigned int status, - unsigned int qdio_error, unsigned int siga_error, - int sbal_index, int sbal_count) +void zfcp_hba_dbf_event_qdio(struct zfcp_adapter *adapter, + unsigned int qdio_error, int sbal_index, + int sbal_count) { struct zfcp_hba_dbf_record *r = &adapter->hba_dbf_buf; unsigned long flags; @@ -313,9 +311,7 @@ void zfcp_hba_dbf_event_qdio(struct zfcp_adapter *adapter, unsigned int status, spin_lock_irqsave(&adapter->hba_dbf_lock, flags); memset(r, 0, sizeof(*r)); strncpy(r->tag, "qdio", ZFCP_DBF_TAG_SIZE); - r->u.qdio.status = status; r->u.qdio.qdio_error = qdio_error; - r->u.qdio.siga_error = siga_error; r->u.qdio.sbal_index = sbal_index; r->u.qdio.sbal_count = sbal_count; debug_event(adapter->hba_dbf, 0, r, sizeof(*r)); @@ -398,9 +394,7 @@ static void zfcp_hba_dbf_view_status(char **p, static void zfcp_hba_dbf_view_qdio(char **p, struct zfcp_hba_dbf_record_qdio *r) { - zfcp_dbf_out(p, "status", "0x%08x", r->status); zfcp_dbf_out(p, "qdio_error", "0x%08x", r->qdio_error); - zfcp_dbf_out(p, "siga_error", "0x%08x", r->siga_error); zfcp_dbf_out(p, "sbal_index", "0x%02x", r->sbal_index); zfcp_dbf_out(p, "sbal_count", "0x%02x", r->sbal_count); } diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h index d04aea604974..0ddb18449d11 100644 --- a/drivers/s390/scsi/zfcp_dbf.h +++ b/drivers/s390/scsi/zfcp_dbf.h @@ -139,9 +139,7 @@ struct zfcp_hba_dbf_record_status { } __attribute__ ((packed)); struct zfcp_hba_dbf_record_qdio { - u32 status; u32 qdio_error; - u32 siga_error; u8 sbal_index; u8 sbal_count; } __attribute__ ((packed)); diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 8065b2b224b7..edfdb21591f3 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -48,9 +48,8 @@ extern void zfcp_rec_dbf_event_action(u8, struct zfcp_erp_action *); extern void zfcp_hba_dbf_event_fsf_response(struct zfcp_fsf_req *); extern void zfcp_hba_dbf_event_fsf_unsol(const char *, struct zfcp_adapter *, struct fsf_status_read_buffer *); -extern void zfcp_hba_dbf_event_qdio(struct zfcp_adapter *, - unsigned int, unsigned int, unsigned int, - int, int); +extern void zfcp_hba_dbf_event_qdio(struct zfcp_adapter *, unsigned int, int, + int); extern void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *); extern void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *); extern void zfcp_san_dbf_event_els_request(struct zfcp_fsf_req *); diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c index 72e3094796d4..d6dbd653fde9 100644 --- a/drivers/s390/scsi/zfcp_qdio.c +++ b/drivers/s390/scsi/zfcp_qdio.c @@ -74,17 +74,15 @@ static void zfcp_qdio_zero_sbals(struct qdio_buffer *sbal[], int first, int cnt) } } -static void zfcp_qdio_int_req(struct ccw_device *cdev, unsigned int status, - unsigned int qdio_err, unsigned int siga_err, - unsigned int queue_no, int first, int count, +static void zfcp_qdio_int_req(struct ccw_device *cdev, unsigned int qdio_err, + int queue_no, int first, int count, unsigned long parm) { struct zfcp_adapter *adapter = (struct zfcp_adapter *) parm; struct zfcp_qdio_queue *queue = &adapter->req_q; - if (unlikely(status & QDIO_STATUS_LOOK_FOR_ERROR)) { - zfcp_hba_dbf_event_qdio(adapter, status, qdio_err, siga_err, - first, count); + if (unlikely(qdio_err)) { + zfcp_hba_dbf_event_qdio(adapter, qdio_err, first, count); zfcp_qdio_handler_error(adapter, 140); return; } @@ -129,8 +127,7 @@ static void zfcp_qdio_resp_put_back(struct zfcp_adapter *adapter, int processed) count = atomic_read(&queue->count) + processed; - retval = do_QDIO(cdev, QDIO_FLAG_SYNC_INPUT | QDIO_FLAG_UNDER_INTERRUPT, - 0, start, count, NULL); + retval = do_QDIO(cdev, QDIO_FLAG_SYNC_INPUT, 0, start, count); if (unlikely(retval)) { atomic_set(&queue->count, count); @@ -142,9 +139,8 @@ static void zfcp_qdio_resp_put_back(struct zfcp_adapter *adapter, int processed) } } -static void zfcp_qdio_int_resp(struct ccw_device *cdev, unsigned int status, - unsigned int qdio_err, unsigned int siga_err, - unsigned int queue_no, int first, int count, +static void zfcp_qdio_int_resp(struct ccw_device *cdev, unsigned int qdio_err, + int queue_no, int first, int count, unsigned long parm) { struct zfcp_adapter *adapter = (struct zfcp_adapter *) parm; @@ -152,9 +148,8 @@ static void zfcp_qdio_int_resp(struct ccw_device *cdev, unsigned int status, volatile struct qdio_buffer_element *sbale; int sbal_idx, sbale_idx, sbal_no; - if (unlikely(status & QDIO_STATUS_LOOK_FOR_ERROR)) { - zfcp_hba_dbf_event_qdio(adapter, status, qdio_err, siga_err, - first, count); + if (unlikely(qdio_err)) { + zfcp_hba_dbf_event_qdio(adapter, qdio_err, first, count); zfcp_qdio_handler_error(adapter, 147); return; } @@ -362,7 +357,7 @@ int zfcp_qdio_send(struct zfcp_fsf_req *fsf_req) } retval = do_QDIO(adapter->ccw_device, QDIO_FLAG_SYNC_OUTPUT, 0, first, - count, NULL); + count); if (unlikely(retval)) { zfcp_qdio_zero_sbals(req_q->sbal, first, count); return retval; @@ -400,10 +395,6 @@ int zfcp_qdio_allocate(struct zfcp_adapter *adapter) init_data->qib_param_field = NULL; init_data->input_slib_elements = NULL; init_data->output_slib_elements = NULL; - init_data->min_input_threshold = 1; - init_data->max_input_threshold = 5000; - init_data->min_output_threshold = 1; - init_data->max_output_threshold = 1000; init_data->no_input_qs = 1; init_data->no_output_qs = 1; init_data->input_handler = zfcp_qdio_int_resp; @@ -436,9 +427,7 @@ void zfcp_qdio_close(struct zfcp_adapter *adapter) atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status); spin_unlock(&req_q->lock); - while (qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR) - == -EINPROGRESS) - ssleep(1); + qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR); /* cleanup used outbound sbals */ count = atomic_read(&req_q->count); @@ -473,7 +462,7 @@ int zfcp_qdio_open(struct zfcp_adapter *adapter) return -EIO; } - if (qdio_activate(adapter->ccw_device, 0)) { + if (qdio_activate(adapter->ccw_device)) { dev_err(&adapter->ccw_device->dev, "Activate of QDIO queues failed.\n"); goto failed_qdio; @@ -487,7 +476,7 @@ int zfcp_qdio_open(struct zfcp_adapter *adapter) } if (do_QDIO(adapter->ccw_device, QDIO_FLAG_SYNC_INPUT, 0, 0, - QDIO_MAX_BUFFERS_PER_Q, NULL)) { + QDIO_MAX_BUFFERS_PER_Q)) { dev_err(&adapter->ccw_device->dev, "Init of QDIO response queue failed.\n"); goto failed_qdio; @@ -501,9 +490,6 @@ int zfcp_qdio_open(struct zfcp_adapter *adapter) return 0; failed_qdio: - while (qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR) - == -EINPROGRESS) - ssleep(1); - + qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR); return -EIO; } diff --git a/include/asm-s390/qdio.h b/include/asm-s390/qdio.h index 11240342a0f4..6813772171f2 100644 --- a/include/asm-s390/qdio.h +++ b/include/asm-s390/qdio.h @@ -1,404 +1,382 @@ /* * linux/include/asm-s390/qdio.h * - * Linux for S/390 QDIO base support, Hipersocket base support - * version 2 - * - * Copyright 2000,2002 IBM Corporation + * Copyright 2000,2008 IBM Corp. * Author(s): Utz Bacher + * Jan Glauber * */ #ifndef __QDIO_H__ #define __QDIO_H__ -/* note, that most of the typedef's are from ingo. */ - #include #include #include -#define QDIO_NAME "qdio " - -#ifndef __s390x__ -#define QDIO_32_BIT -#endif /* __s390x__ */ - -/**** CONSTANTS, that are relied on without using these symbols *****/ -#define QDIO_MAX_QUEUES_PER_IRQ 32 /* used in width of unsigned int */ -/************************ END of CONSTANTS **************************/ -#define QDIO_MAX_BUFFERS_PER_Q 128 /* must be a power of 2 (%x=&(x-1)*/ -#define QDIO_BUF_ORDER 7 /* 2**this == number of pages used for sbals in 1 q */ -#define QDIO_MAX_ELEMENTS_PER_BUFFER 16 -#define SBAL_SIZE 256 - -#define QDIO_QETH_QFMT 0 -#define QDIO_ZFCP_QFMT 1 -#define QDIO_IQDIO_QFMT 2 -#define QDIO_IQDIO_QFMT_ASYNCH 3 - -struct qdio_buffer_element{ - unsigned int flags; - unsigned int length; -#ifdef QDIO_32_BIT - void *reserved; -#endif /* QDIO_32_BIT */ - void *addr; -} __attribute__ ((packed,aligned(16))); - -struct qdio_buffer{ - volatile struct qdio_buffer_element element[16]; -} __attribute__ ((packed,aligned(256))); - - -/* params are: ccw_device, status, qdio_error, siga_error, - queue_number, first element processed, number of elements processed, - int_parm */ -typedef void qdio_handler_t(struct ccw_device *,unsigned int,unsigned int, - unsigned int,unsigned int,int,int,unsigned long); - - -#define QDIO_STATUS_INBOUND_INT 0x01 -#define QDIO_STATUS_OUTBOUND_INT 0x02 -#define QDIO_STATUS_LOOK_FOR_ERROR 0x04 -#define QDIO_STATUS_MORE_THAN_ONE_QDIO_ERROR 0x08 -#define QDIO_STATUS_MORE_THAN_ONE_SIGA_ERROR 0x10 -#define QDIO_STATUS_ACTIVATE_CHECK_CONDITION 0x20 - -#define QDIO_SIGA_ERROR_ACCESS_EXCEPTION 0x10 -#define QDIO_SIGA_ERROR_B_BIT_SET 0x20 - -/* for qdio_initialize */ -#define QDIO_INBOUND_0COPY_SBALS 0x01 -#define QDIO_OUTBOUND_0COPY_SBALS 0x02 -#define QDIO_USE_OUTBOUND_PCIS 0x04 - -/* for qdio_cleanup */ -#define QDIO_FLAG_CLEANUP_USING_CLEAR 0x01 -#define QDIO_FLAG_CLEANUP_USING_HALT 0x02 - -struct qdio_initialize { - struct ccw_device *cdev; - unsigned char q_format; - unsigned char adapter_name[8]; - unsigned int qib_param_field_format; /*adapter dependent*/ - /* pointer to 128 bytes or NULL, if no param field */ - unsigned char *qib_param_field; /* adapter dependent */ - /* pointer to no_queues*128 words of data or NULL */ - unsigned long *input_slib_elements; - unsigned long *output_slib_elements; - unsigned int min_input_threshold; - unsigned int max_input_threshold; - unsigned int min_output_threshold; - unsigned int max_output_threshold; - unsigned int no_input_qs; - unsigned int no_output_qs; - qdio_handler_t *input_handler; - qdio_handler_t *output_handler; - unsigned long int_parm; - unsigned long flags; - void **input_sbal_addr_array; /* addr of n*128 void ptrs */ - void **output_sbal_addr_array; /* addr of n*128 void ptrs */ -}; - -extern int qdio_initialize(struct qdio_initialize *init_data); -extern int qdio_allocate(struct qdio_initialize *init_data); -extern int qdio_establish(struct qdio_initialize *init_data); - -extern int qdio_activate(struct ccw_device *,int flags); - -#define QDIO_STATE_MUST_USE_OUTB_PCI 0x00000001 -#define QDIO_STATE_INACTIVE 0x00000002 /* after qdio_cleanup */ -#define QDIO_STATE_ESTABLISHED 0x00000004 /* after qdio_initialize */ -#define QDIO_STATE_ACTIVE 0x00000008 /* after qdio_activate */ -#define QDIO_STATE_STOPPED 0x00000010 /* after queues went down */ -extern unsigned long qdio_get_status(int irq); - - -#define QDIO_FLAG_SYNC_INPUT 0x01 -#define QDIO_FLAG_SYNC_OUTPUT 0x02 -#define QDIO_FLAG_UNDER_INTERRUPT 0x04 -#define QDIO_FLAG_NO_INPUT_INTERRUPT_CONTEXT 0x08 /* no effect on - adapter interrupts */ -#define QDIO_FLAG_DONT_SIGA 0x10 -#define QDIO_FLAG_PCI_OUT 0x20 - -extern int do_QDIO(struct ccw_device*, unsigned int flags, - unsigned int queue_number, - unsigned int qidx,unsigned int count, - struct qdio_buffer *buffers); - -extern int qdio_get_ssqd_pct(struct ccw_device*); -extern int qdio_synchronize(struct ccw_device*, unsigned int flags, - unsigned int queue_number); - -extern int qdio_cleanup(struct ccw_device*, int how); -extern int qdio_shutdown(struct ccw_device*, int how); -extern int qdio_free(struct ccw_device*); - -unsigned char qdio_get_slsb_state(struct ccw_device*, unsigned int flag, - unsigned int queue_number, - unsigned int qidx); - -extern void qdio_init_scrubber(void); - +#define QDIO_MAX_QUEUES_PER_IRQ 32 +#define QDIO_MAX_BUFFERS_PER_Q 128 +#define QDIO_MAX_BUFFERS_MASK (QDIO_MAX_BUFFERS_PER_Q - 1) +#define QDIO_MAX_ELEMENTS_PER_BUFFER 16 +#define QDIO_SBAL_SIZE 256 + +#define QDIO_QETH_QFMT 0 +#define QDIO_ZFCP_QFMT 1 +#define QDIO_IQDIO_QFMT 2 + +/** + * struct qdesfmt0 - queue descriptor, format 0 + * @sliba: storage list information block address + * @sla: storage list address + * @slsba: storage list state block address + * @akey: access key for DLIB + * @bkey: access key for SL + * @ckey: access key for SBALs + * @dkey: access key for SLSB + */ struct qdesfmt0 { -#ifdef QDIO_32_BIT - unsigned long res1; /* reserved */ -#endif /* QDIO_32_BIT */ - unsigned long sliba; /* storage-list-information-block - address */ -#ifdef QDIO_32_BIT - unsigned long res2; /* reserved */ -#endif /* QDIO_32_BIT */ - unsigned long sla; /* storage-list address */ -#ifdef QDIO_32_BIT - unsigned long res3; /* reserved */ -#endif /* QDIO_32_BIT */ - unsigned long slsba; /* storage-list-state-block address */ - unsigned int res4; /* reserved */ - unsigned int akey : 4; /* access key for DLIB */ - unsigned int bkey : 4; /* access key for SL */ - unsigned int ckey : 4; /* access key for SBALs */ - unsigned int dkey : 4; /* access key for SLSB */ - unsigned int res5 : 16; /* reserved */ + u64 sliba; + u64 sla; + u64 slsba; + u32 : 32; + u32 akey : 4; + u32 bkey : 4; + u32 ckey : 4; + u32 dkey : 4; + u32 : 16; } __attribute__ ((packed)); -/* - * Queue-Description record (QDR) +/** + * struct qdr - queue description record (QDR) + * @qfmt: queue format + * @pfmt: implementation dependent parameter format + * @ac: adapter characteristics + * @iqdcnt: input queue descriptor count + * @oqdcnt: output queue descriptor count + * @iqdsz: inpout queue descriptor size + * @oqdsz: output queue descriptor size + * @qiba: queue information block address + * @qkey: queue information block key + * @qdf0: queue descriptions */ struct qdr { - unsigned int qfmt : 8; /* queue format */ - unsigned int pfmt : 8; /* impl. dep. parameter format */ - unsigned int res1 : 8; /* reserved */ - unsigned int ac : 8; /* adapter characteristics */ - unsigned int res2 : 8; /* reserved */ - unsigned int iqdcnt : 8; /* input-queue-descriptor count */ - unsigned int res3 : 8; /* reserved */ - unsigned int oqdcnt : 8; /* output-queue-descriptor count */ - unsigned int res4 : 8; /* reserved */ - unsigned int iqdsz : 8; /* input-queue-descriptor size */ - unsigned int res5 : 8; /* reserved */ - unsigned int oqdsz : 8; /* output-queue-descriptor size */ - unsigned int res6[9]; /* reserved */ -#ifdef QDIO_32_BIT - unsigned long res7; /* reserved */ -#endif /* QDIO_32_BIT */ - unsigned long qiba; /* queue-information-block address */ - unsigned int res8; /* reserved */ - unsigned int qkey : 4; /* queue-information-block key */ - unsigned int res9 : 28; /* reserved */ -/* union _qd {*/ /* why this? */ - struct qdesfmt0 qdf0[126]; -/* } qd;*/ -} __attribute__ ((packed,aligned(4096))); - - -/* - * queue information block (QIB) - */ -#define QIB_AC_INBOUND_PCI_SUPPORTED 0x80 -#define QIB_AC_OUTBOUND_PCI_SUPPORTED 0x40 + u32 qfmt : 8; + u32 pfmt : 8; + u32 : 8; + u32 ac : 8; + u32 : 8; + u32 iqdcnt : 8; + u32 : 8; + u32 oqdcnt : 8; + u32 : 8; + u32 iqdsz : 8; + u32 : 8; + u32 oqdsz : 8; + /* private: */ + u32 res[9]; + /* public: */ + u64 qiba; + u32 : 32; + u32 qkey : 4; + u32 : 28; + struct qdesfmt0 qdf0[126]; +} __attribute__ ((packed, aligned(4096))); + +#define QIB_AC_OUTBOUND_PCI_SUPPORTED 0x40 #define QIB_RFLAGS_ENABLE_QEBSM 0x80 +/** + * struct qib - queue information block (QIB) + * @qfmt: queue format + * @pfmt: implementation dependent parameter format + * @rflags: QEBSM + * @ac: adapter characteristics + * @isliba: absolute address of first input SLIB + * @osliba: absolute address of first output SLIB + * @ebcnam: adapter identifier in EBCDIC + * @parm: implementation dependent parameters + */ struct qib { - unsigned int qfmt : 8; /* queue format */ - unsigned int pfmt : 8; /* impl. dep. parameter format */ - unsigned int rflags : 8; /* QEBSM */ - unsigned int ac : 8; /* adapter characteristics */ - unsigned int res2; /* reserved */ -#ifdef QDIO_32_BIT - unsigned long res3; /* reserved */ -#endif /* QDIO_32_BIT */ - unsigned long isliba; /* absolute address of 1st - input SLIB */ -#ifdef QDIO_32_BIT - unsigned long res4; /* reserved */ -#endif /* QDIO_32_BIT */ - unsigned long osliba; /* absolute address of 1st - output SLIB */ - unsigned int res5; /* reserved */ - unsigned int res6; /* reserved */ - unsigned char ebcnam[8]; /* adapter identifier in EBCDIC */ - unsigned char res7[88]; /* reserved */ - unsigned char parm[QDIO_MAX_BUFFERS_PER_Q]; - /* implementation dependent - parameters */ -} __attribute__ ((packed,aligned(256))); - - -/* - * storage-list-information block element (SLIBE) + u32 qfmt : 8; + u32 pfmt : 8; + u32 rflags : 8; + u32 ac : 8; + u32 : 32; + u64 isliba; + u64 osliba; + u32 : 32; + u32 : 32; + u8 ebcnam[8]; + /* private: */ + u8 res[88]; + /* public: */ + u8 parm[QDIO_MAX_BUFFERS_PER_Q]; +} __attribute__ ((packed, aligned(256))); + +/** + * struct slibe - storage list information block element (SLIBE) + * @parms: implementation dependent parameters */ struct slibe { -#ifdef QDIO_32_BIT - unsigned long res; /* reserved */ -#endif /* QDIO_32_BIT */ - unsigned long parms; /* implementation dependent - parameters */ + u64 parms; }; -/* - * storage-list-information block (SLIB) +/** + * struct slib - storage list information block (SLIB) + * @nsliba: next SLIB address (if any) + * @sla: SL address + * @slsba: SLSB address + * @slibe: SLIB elements */ struct slib { -#ifdef QDIO_32_BIT - unsigned long res1; /* reserved */ -#endif /* QDIO_32_BIT */ - unsigned long nsliba; /* next SLIB address (if any) */ -#ifdef QDIO_32_BIT - unsigned long res2; /* reserved */ -#endif /* QDIO_32_BIT */ - unsigned long sla; /* SL address */ -#ifdef QDIO_32_BIT - unsigned long res3; /* reserved */ -#endif /* QDIO_32_BIT */ - unsigned long slsba; /* SLSB address */ - unsigned char res4[1000]; /* reserved */ - struct slibe slibe[QDIO_MAX_BUFFERS_PER_Q]; /* SLIB elements */ -} __attribute__ ((packed,aligned(2048))); - + u64 nsliba; + u64 sla; + u64 slsba; + /* private: */ + u8 res[1000]; + /* public: */ + struct slibe slibe[QDIO_MAX_BUFFERS_PER_Q]; +} __attribute__ ((packed, aligned(2048))); + +/** + * struct sbal_flags - storage block address list flags + * @last: last entry + * @cont: contiguous storage + * @frag: fragmentation + */ struct sbal_flags { - unsigned char res1 : 1; /* reserved */ - unsigned char last : 1; /* last entry */ - unsigned char cont : 1; /* contiguous storage */ - unsigned char res2 : 1; /* reserved */ - unsigned char frag : 2; /* fragmentation (s.below) */ - unsigned char res3 : 2; /* reserved */ + u8 : 1; + u8 last : 1; + u8 cont : 1; + u8 : 1; + u8 frag : 2; + u8 : 2; } __attribute__ ((packed)); -#define SBAL_FLAGS_FIRST_FRAG 0x04000000UL -#define SBAL_FLAGS_MIDDLE_FRAG 0x08000000UL -#define SBAL_FLAGS_LAST_FRAG 0x0c000000UL -#define SBAL_FLAGS_LAST_ENTRY 0x40000000UL -#define SBAL_FLAGS_CONTIGUOUS 0x20000000UL +#define SBAL_FLAGS_FIRST_FRAG 0x04000000UL +#define SBAL_FLAGS_MIDDLE_FRAG 0x08000000UL +#define SBAL_FLAGS_LAST_FRAG 0x0c000000UL +#define SBAL_FLAGS_LAST_ENTRY 0x40000000UL +#define SBAL_FLAGS_CONTIGUOUS 0x20000000UL -#define SBAL_FLAGS0_DATA_CONTINUATION 0x20UL +#define SBAL_FLAGS0_DATA_CONTINUATION 0x20UL /* Awesome OpenFCP extensions */ -#define SBAL_FLAGS0_TYPE_STATUS 0x00UL -#define SBAL_FLAGS0_TYPE_WRITE 0x08UL -#define SBAL_FLAGS0_TYPE_READ 0x10UL -#define SBAL_FLAGS0_TYPE_WRITE_READ 0x18UL -#define SBAL_FLAGS0_MORE_SBALS 0x04UL -#define SBAL_FLAGS0_COMMAND 0x02UL -#define SBAL_FLAGS0_LAST_SBAL 0x00UL -#define SBAL_FLAGS0_ONLY_SBAL SBAL_FLAGS0_COMMAND -#define SBAL_FLAGS0_MIDDLE_SBAL SBAL_FLAGS0_MORE_SBALS -#define SBAL_FLAGS0_FIRST_SBAL SBAL_FLAGS0_MORE_SBALS | SBAL_FLAGS0_COMMAND -/* Naught of interest beyond this point */ - -#define SBAL_FLAGS0_PCI 0x40 +#define SBAL_FLAGS0_TYPE_STATUS 0x00UL +#define SBAL_FLAGS0_TYPE_WRITE 0x08UL +#define SBAL_FLAGS0_TYPE_READ 0x10UL +#define SBAL_FLAGS0_TYPE_WRITE_READ 0x18UL +#define SBAL_FLAGS0_MORE_SBALS 0x04UL +#define SBAL_FLAGS0_COMMAND 0x02UL +#define SBAL_FLAGS0_LAST_SBAL 0x00UL +#define SBAL_FLAGS0_ONLY_SBAL SBAL_FLAGS0_COMMAND +#define SBAL_FLAGS0_MIDDLE_SBAL SBAL_FLAGS0_MORE_SBALS +#define SBAL_FLAGS0_FIRST_SBAL SBAL_FLAGS0_MORE_SBALS | SBAL_FLAGS0_COMMAND +#define SBAL_FLAGS0_PCI 0x40 + +/** + * struct sbal_sbalf_0 - sbal flags for sbale 0 + * @pci: PCI indicator + * @cont: data continuation + * @sbtype: storage-block type (FCP) + */ struct sbal_sbalf_0 { - unsigned char res1 : 1; /* reserved */ - unsigned char pci : 1; /* PCI indicator */ - unsigned char cont : 1; /* data continuation */ - unsigned char sbtype: 2; /* storage-block type (OpenFCP) */ - unsigned char res2 : 3; /* reserved */ + u8 : 1; + u8 pci : 1; + u8 cont : 1; + u8 sbtype : 2; + u8 : 3; } __attribute__ ((packed)); +/** + * struct sbal_sbalf_1 - sbal flags for sbale 1 + * @key: storage key + */ struct sbal_sbalf_1 { - unsigned char res1 : 4; /* reserved */ - unsigned char key : 4; /* storage key */ + u8 : 4; + u8 key : 4; } __attribute__ ((packed)); +/** + * struct sbal_sbalf_14 - sbal flags for sbale 14 + * @erridx: error index + */ struct sbal_sbalf_14 { - unsigned char res1 : 4; /* reserved */ - unsigned char erridx : 4; /* error index */ + u8 : 4; + u8 erridx : 4; } __attribute__ ((packed)); +/** + * struct sbal_sbalf_15 - sbal flags for sbale 15 + * @reason: reason for error state + */ struct sbal_sbalf_15 { - unsigned char reason; /* reserved */ + u8 reason; } __attribute__ ((packed)); +/** + * union sbal_sbalf - storage block address list flags + * @i0: sbalf0 + * @i1: sbalf1 + * @i14: sbalf14 + * @i15: sblaf15 + * @value: raw value + */ union sbal_sbalf { struct sbal_sbalf_0 i0; struct sbal_sbalf_1 i1; struct sbal_sbalf_14 i14; struct sbal_sbalf_15 i15; - unsigned char value; + u8 value; }; -struct sbal_element { - union { - struct sbal_flags bits; /* flags */ - unsigned char value; - } flags; - unsigned int res1 : 16; /* reserved */ - union sbal_sbalf sbalf; /* SBAL flags */ - unsigned int res2 : 16; /* reserved */ - unsigned int count : 16; /* data count */ -#ifdef QDIO_32_BIT - unsigned long res3; /* reserved */ -#endif /* QDIO_32_BIT */ - unsigned long addr; /* absolute data address */ -} __attribute__ ((packed,aligned(16))); +/** + * struct qdio_buffer_element - SBAL entry + * @flags: flags + * @length: length + * @addr: address +*/ +struct qdio_buffer_element { + u32 flags; + u32 length; +#ifdef CONFIG_32BIT + /* private: */ + void *reserved; + /* public: */ +#endif + void *addr; +} __attribute__ ((packed, aligned(16))); -/* - * strorage-block access-list (SBAL) +/** + * struct qdio_buffer - storage block address list (SBAL) + * @element: SBAL entries */ -struct sbal { - struct sbal_element element[QDIO_MAX_ELEMENTS_PER_BUFFER]; -} __attribute__ ((packed,aligned(256))); +struct qdio_buffer { + struct qdio_buffer_element element[QDIO_MAX_ELEMENTS_PER_BUFFER]; +} __attribute__ ((packed, aligned(256))); -/* - * storage-list (SL) +/** + * struct sl_element - storage list entry + * @sbal: absolute SBAL address */ struct sl_element { -#ifdef QDIO_32_BIT - unsigned long res; /* reserved */ -#endif /* QDIO_32_BIT */ - unsigned long sbal; /* absolute SBAL address */ +#ifdef CONFIG_32BIT + /* private: */ + unsigned long reserved; + /* public: */ +#endif + unsigned long sbal; } __attribute__ ((packed)); +/** + * struct sl - storage list (SL) + * @element: SL entries + */ struct sl { struct sl_element element[QDIO_MAX_BUFFERS_PER_Q]; -} __attribute__ ((packed,aligned(1024))); +} __attribute__ ((packed, aligned(1024))); -/* - * storage-list-state block (SLSB) +/** + * struct slsb - storage list state block (SLSB) + * @val: state per buffer */ -struct slsb_flags { - unsigned char owner : 2; /* SBAL owner */ - unsigned char type : 1; /* buffer type */ - unsigned char state : 5; /* processing state */ +struct slsb { + u8 val[QDIO_MAX_BUFFERS_PER_Q]; +} __attribute__ ((packed, aligned(256))); + +struct qdio_ssqd_desc { + u8 flags; + u8:8; + u16 sch; + u8 qfmt; + u8 parm; + u8 qdioac1; + u8 sch_class; + u8 pcnt; + u8 icnt; + u8:8; + u8 ocnt; + u8:8; + u8 mbccnt; + u16 qdioac2; + u64 sch_token; + u64:64; } __attribute__ ((packed)); +/* params are: ccw_device, qdio_error, queue_number, + first element processed, number of elements processed, int_parm */ +typedef void qdio_handler_t(struct ccw_device *, unsigned int, int, + int, int, unsigned long); -struct slsb { - union { - unsigned char val[QDIO_MAX_BUFFERS_PER_Q]; - struct slsb_flags flags[QDIO_MAX_BUFFERS_PER_Q]; - } acc; -} __attribute__ ((packed,aligned(256))); +/* qdio errors reported to the upper-layer program */ +#define QDIO_ERROR_SIGA_ACCESS_EXCEPTION 0x10 +#define QDIO_ERROR_SIGA_BUSY 0x20 +#define QDIO_ERROR_ACTIVATE_CHECK_CONDITION 0x40 +#define QDIO_ERROR_SLSB_STATE 0x80 -/* - * SLSB values +/* for qdio_initialize */ +#define QDIO_INBOUND_0COPY_SBALS 0x01 +#define QDIO_OUTBOUND_0COPY_SBALS 0x02 +#define QDIO_USE_OUTBOUND_PCIS 0x04 + +/* for qdio_cleanup */ +#define QDIO_FLAG_CLEANUP_USING_CLEAR 0x01 +#define QDIO_FLAG_CLEANUP_USING_HALT 0x02 + +/** + * struct qdio_initialize - qdio initalization data + * @cdev: associated ccw device + * @q_format: queue format + * @adapter_name: name for the adapter + * @qib_param_field_format: format for qib_parm_field + * @qib_param_field: pointer to 128 bytes or NULL, if no param field + * @input_slib_elements: pointer to no_input_qs * 128 words of data or NULL + * @output_slib_elements: pointer to no_output_qs * 128 words of data or NULL + * @no_input_qs: number of input queues + * @no_output_qs: number of output queues + * @input_handler: handler to be called for input queues + * @output_handler: handler to be called for output queues + * @int_parm: interruption parameter + * @flags: initialization flags + * @input_sbal_addr_array: address of no_input_qs * 128 pointers + * @output_sbal_addr_array: address of no_output_qs * 128 pointers */ -#define SLSB_OWNER_PROG 1 -#define SLSB_OWNER_CU 2 - -#define SLSB_TYPE_INPUT 0 -#define SLSB_TYPE_OUTPUT 1 - -#define SLSB_STATE_NOT_INIT 0 -#define SLSB_STATE_EMPTY 1 -#define SLSB_STATE_PRIMED 2 -#define SLSB_STATE_HALTED 0xe -#define SLSB_STATE_ERROR 0xf - -#define SLSB_P_INPUT_NOT_INIT 0x80 -#define SLSB_P_INPUT_PROCESSING 0x81 -#define SLSB_CU_INPUT_EMPTY 0x41 -#define SLSB_P_INPUT_PRIMED 0x82 -#define SLSB_P_INPUT_HALTED 0x8E -#define SLSB_P_INPUT_ERROR 0x8F - -#define SLSB_P_OUTPUT_NOT_INIT 0xA0 -#define SLSB_P_OUTPUT_EMPTY 0xA1 -#define SLSB_CU_OUTPUT_PRIMED 0x62 -#define SLSB_P_OUTPUT_HALTED 0xAE -#define SLSB_P_OUTPUT_ERROR 0xAF - -#define SLSB_ERROR_DURING_LOOKUP 0xFF +struct qdio_initialize { + struct ccw_device *cdev; + unsigned char q_format; + unsigned char adapter_name[8]; + unsigned int qib_param_field_format; + unsigned char *qib_param_field; + unsigned long *input_slib_elements; + unsigned long *output_slib_elements; + unsigned int no_input_qs; + unsigned int no_output_qs; + qdio_handler_t *input_handler; + qdio_handler_t *output_handler; + unsigned long int_parm; + unsigned long flags; + void **input_sbal_addr_array; + void **output_sbal_addr_array; +}; + +#define QDIO_STATE_INACTIVE 0x00000002 /* after qdio_cleanup */ +#define QDIO_STATE_ESTABLISHED 0x00000004 /* after qdio_establish */ +#define QDIO_STATE_ACTIVE 0x00000008 /* after qdio_activate */ +#define QDIO_STATE_STOPPED 0x00000010 /* after queues went down */ + +#define QDIO_FLAG_SYNC_INPUT 0x01 +#define QDIO_FLAG_SYNC_OUTPUT 0x02 +#define QDIO_FLAG_PCI_OUT 0x10 + +extern int qdio_initialize(struct qdio_initialize *init_data); +extern int qdio_allocate(struct qdio_initialize *init_data); +extern int qdio_establish(struct qdio_initialize *init_data); +extern int qdio_activate(struct ccw_device *); + +extern int do_QDIO(struct ccw_device*, unsigned int flags, + int q_nr, int qidx, int count); +extern int qdio_cleanup(struct ccw_device*, int how); +extern int qdio_shutdown(struct ccw_device*, int how); +extern int qdio_free(struct ccw_device *); +extern struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev); #endif /* __QDIO_H__ */ diff --git a/include/asm-s390/setup.h b/include/asm-s390/setup.h index f09ee3f72977..4ba14e463e83 100644 --- a/include/asm-s390/setup.h +++ b/include/asm-s390/setup.h @@ -65,6 +65,7 @@ extern unsigned long machine_flags; #define MACHINE_FLAG_VM (1UL << 0) #define MACHINE_FLAG_IEEE (1UL << 1) +#define MACHINE_FLAG_P390 (1UL << 2) #define MACHINE_FLAG_CSP (1UL << 3) #define MACHINE_FLAG_MVPG (1UL << 4) #define MACHINE_FLAG_DIAG44 (1UL << 5) @@ -77,7 +78,6 @@ extern unsigned long machine_flags; #define MACHINE_IS_VM (machine_flags & MACHINE_FLAG_VM) #define MACHINE_IS_KVM (machine_flags & MACHINE_FLAG_KVM) -#define MACHINE_IS_P390 (machine_flags & MACHINE_FLAG_P390) #define MACHINE_HAS_DIAG9C (machine_flags & MACHINE_FLAG_DIAG9C) #ifndef __s390x__ -- cgit v1.2.3 From 8586cb60ce85f40431cf06fe97512269d3992f03 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Thu, 17 Jul 2008 17:16:49 +0200 Subject: [S390] dasd: use -EOPNOTSUPP instead of -ENOTSUPP return value -ENOTSUPP is not valid in userspace context, use -EOPNOTSUPP instead Signed-off-by: Stefan Haberland Cc: Martin Schwidefsky Signed-off-by: Heiko Carstens --- drivers/s390/block/dasd_diag.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index ab5c5b43bdcf..85fcb4371054 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -349,7 +349,7 @@ dasd_diag_check_device(struct dasd_device *device) if (rc) { DEV_MESSAGE(KERN_WARNING, device, "failed to retrieve device " "information (rc=%d)", rc); - rc = -ENOTSUPP; + rc = -EOPNOTSUPP; goto out; } @@ -364,7 +364,7 @@ dasd_diag_check_device(struct dasd_device *device) default: DEV_MESSAGE(KERN_WARNING, device, "unsupported device class " "(class=%d)", private->rdc_data.vdev_class); - rc = -ENOTSUPP; + rc = -EOPNOTSUPP; goto out; } -- cgit v1.2.3 From 9fa111372a54f695f65e0de2f2a2108fe6cf3584 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 17 Jul 2008 17:38:17 +0200 Subject: ftrace: fix lockup with MAXSMP MAXSMP brings in lots of use of various bitops in smp_processor_id() and friends - causing ftrace to lock up during bootup: calling anon_inode_init+0x0/0x130 initcall anon_inode_init+0x0/0x130 returned 0 after 0 msecs calling acpi_event_init+0x0/0x57 [ hard hang ] So exclude the bitops facilities from tracing. Signed-off-by: Ingo Molnar --- lib/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/lib/Makefile b/lib/Makefile index 2c62a9c06fbe..d90d31102e05 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -15,6 +15,9 @@ CFLAGS_REMOVE_string.o = -pg CFLAGS_REMOVE_spinlock_debug.o = -pg CFLAGS_REMOVE_list_debug.o = -pg CFLAGS_REMOVE_debugobjects.o = -pg +CFLAGS_REMOVE_find_next_bit.o = -pg +CFLAGS_REMOVE_cpumask.o = -pg +CFLAGS_REMOVE_bitmap.o = -pg endif lib-$(CONFIG_MMU) += ioremap.o -- cgit v1.2.3 From c349e0a01c3e0f70913db6a5bb61ab204e0602de Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 15 Apr 2008 22:39:31 +0200 Subject: ftrace: do not trace scheduler functions do not trace scheduler functions - it's still a bit fragile and can lock up with: http://redhat.com/~mingo/misc/config-Thu_Jul_17_13_34_52_CEST_2008 Signed-off-by: Ingo Molnar --- kernel/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/kernel/Makefile b/kernel/Makefile index 0a7ed838984b..985ddb7da4d0 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -11,8 +11,6 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o profile.o \ hrtimer.o rwsem.o nsproxy.o srcu.o semaphore.o \ notifier.o ksysfs.o pm_qos_params.o sched_clock.o -CFLAGS_REMOVE_sched.o = -mno-spe - ifdef CONFIG_FTRACE # Do not trace debug files and internal ftrace files CFLAGS_REMOVE_lockdep.o = -pg @@ -21,6 +19,7 @@ CFLAGS_REMOVE_mutex-debug.o = -pg CFLAGS_REMOVE_rtmutex-debug.o = -pg CFLAGS_REMOVE_cgroup-debug.o = -pg CFLAGS_REMOVE_sched_clock.o = -pg +CFLAGS_REMOVE_sched.o = -mno-spe -pg endif obj-$(CONFIG_SYSCTL_SYSCALL_CHECK) += sysctl_check.o -- cgit v1.2.3 From 2464a609ded094204a3aed24823745ec58e3c879 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 17 Jul 2008 17:40:48 +0200 Subject: ftrace: do not trace library functions make function tracing more robust: do not trace library functions. We've already got a sizable list of exceptions: ifdef CONFIG_FTRACE # Do not profile string.o, since it may be used in early boot or vdso CFLAGS_REMOVE_string.o = -pg # Also do not profile any debug utilities CFLAGS_REMOVE_spinlock_debug.o = -pg CFLAGS_REMOVE_list_debug.o = -pg CFLAGS_REMOVE_debugobjects.o = -pg CFLAGS_REMOVE_find_next_bit.o = -pg CFLAGS_REMOVE_cpumask.o = -pg CFLAGS_REMOVE_bitmap.o = -pg endif ... and the pattern has been that random library functionality showed up in ftrace's critical path (outside of its recursion check), causing hard to debug lockups. So be a bit defensive about it and exclude all lib/*.o functions by default. It's not that they are overly interesting for tracing purposes anyway. Specific ones can still be traced, in an opt-in manner. Signed-off-by: Ingo Molnar --- lib/Makefile | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/lib/Makefile b/lib/Makefile index d90d31102e05..818c4d455518 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -2,24 +2,17 @@ # Makefile for some libs needed in the kernel. # +ifdef CONFIG_FTRACE +ORIG_CFLAGS := $(KBUILD_CFLAGS) +KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS)) +endif + lib-y := ctype.o string.o vsprintf.o cmdline.o \ rbtree.o radix-tree.o dump_stack.o \ idr.o int_sqrt.o extable.o prio_tree.o \ sha1.o irq_regs.o reciprocal_div.o argv_split.o \ proportions.o prio_heap.o ratelimit.o -ifdef CONFIG_FTRACE -# Do not profile string.o, since it may be used in early boot or vdso -CFLAGS_REMOVE_string.o = -pg -# Also do not profile any debug utilities -CFLAGS_REMOVE_spinlock_debug.o = -pg -CFLAGS_REMOVE_list_debug.o = -pg -CFLAGS_REMOVE_debugobjects.o = -pg -CFLAGS_REMOVE_find_next_bit.o = -pg -CFLAGS_REMOVE_cpumask.o = -pg -CFLAGS_REMOVE_bitmap.o = -pg -endif - lib-$(CONFIG_MMU) += ioremap.o lib-$(CONFIG_SMP) += cpumask.o -- cgit v1.2.3 From 7023cc61292f9cd61d99521206480f6e387132ff Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 17 Jul 2008 01:06:55 -0600 Subject: Fix collateral damage to top level Makefile The patch named "powerpc/mpc5121: Add clock driver", also contained an unrelated and bogus change to the top-level makefile. This patch backs out the bad bit. SHA1 of offending patch: 137e95906e294913fab02162e8a1948ade49acb5) Signed-off-by: Grant Likely Acked-by: Benjamin Herrenschmidt Repented-by: John Rigby [ Heh. Normally I pick these out from the diffstats, but I guess I've grown to trust the ppc tree too much ;) - Linus ] Signed-off-by: Linus Torvalds --- Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/Makefile b/Makefile index 1564577bdc53..6192922de9c0 100644 --- a/Makefile +++ b/Makefile @@ -1,4 +1,3 @@ -FRED=42 VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -- cgit v1.2.3 From 7259d936c6af216198ae6af3a25ac6c9dbdbe779 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 16 Jul 2008 23:44:32 -0700 Subject: Update scripts/Makefile.fwinst to cope with older make Also fix unwanted rebuilds of the firmware/ihex2fw tool by including the .ihex2fw.cmd file when present. Signed-off-by: David Woodhouse Reported-and-tested-by: Wang Chen Signed-off-by: Linus Torvalds --- scripts/Makefile.fwinst | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst index 3d2f4609578f..c972c0f54ce0 100644 --- a/scripts/Makefile.fwinst +++ b/scripts/Makefile.fwinst @@ -28,18 +28,39 @@ endif installed-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-all)) installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/. +# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work. +PHONY += $(INSTALL_FW_PATH)/$$(%) install-all-dirs +$(INSTALL_FW_PATH)/$$(%): install-all-dirs + @true +install-all-dirs: $(installed-fw-dirs) + @true + quiet_cmd_install = INSTALL $(subst $(srctree)/,,$@) cmd_install = $(INSTALL) -m0644 $< $@ $(installed-fw-dirs): $(call cmd,mkdir) -$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $(INSTALL_FW_PATH)/$$(dir %)/ +$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $(INSTALL_FW_PATH)/$$(dir %) $(call cmd,install) -.PHONY: __fw_install __fw_modinst FORCE +PHONY += __fw_install __fw_modinst FORCE + +.PHONY: $(PHONY) __fw_install: $(installed-fw) __fw_modinst: $(mod-fw) FORCE: + +# Read all saved command lines and dependencies for the $(targets) we +# may be building using $(if_changed{,_dep}). As an optimization, we +# don't need to read them if the target does not exist; we will rebuild +# anyway in that case. + +targets := $(wildcard $(sort $(targets))) +cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) + +ifneq ($(cmd_files),) + include $(cmd_files) +endif -- cgit v1.2.3 From 2f73ccab5628b4f8e8f4b93fea8082dd31a87a10 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 17 Jul 2008 18:09:12 +0200 Subject: fix build error of arch/ia64/kvm/* Fix calls of smp_call_function*() in arch/ia64/kvm for recent API changes. CC [M] arch/ia64/kvm/kvm-ia64.o arch/ia64/kvm/kvm-ia64.c: In function 'handle_global_purge': arch/ia64/kvm/kvm-ia64.c:398: error: too many arguments to function 'smp_call_function_single' arch/ia64/kvm/kvm-ia64.c: In function 'kvm_vcpu_kick': arch/ia64/kvm/kvm-ia64.c:1696: error: too many arguments to function 'smp_call_function_single' Signed-off-by: Takashi Iwai Acked-by Xiantao Zhang Signed-off-by: Linus Torvalds --- arch/ia64/kvm/kvm-ia64.c | 4 ++-- arch/ia64/kvm/kvm_fw.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 318b81100623..68c978be9a51 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -395,7 +395,7 @@ static int handle_global_purge(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) if (kvm->vcpus[i]->cpu != -1) { call_data.vcpu = kvm->vcpus[i]; smp_call_function_single(kvm->vcpus[i]->cpu, - vcpu_global_purge, &call_data, 0, 1); + vcpu_global_purge, &call_data, 1); } else printk(KERN_WARNING"kvm: Uninit vcpu received ipi!\n"); @@ -1693,7 +1693,7 @@ void kvm_vcpu_kick(struct kvm_vcpu *vcpu) wake_up_interruptible(&vcpu->wq); if (vcpu->guest_mode) - smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0, 0); + smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0); } int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig) diff --git a/arch/ia64/kvm/kvm_fw.c b/arch/ia64/kvm/kvm_fw.c index 091f936c4485..0c69d9ec92d4 100644 --- a/arch/ia64/kvm/kvm_fw.c +++ b/arch/ia64/kvm/kvm_fw.c @@ -130,7 +130,7 @@ static struct ia64_pal_retval pal_cache_flush(struct kvm_vcpu *vcpu) args.cache_type = gr29; args.operation = gr30; smp_call_function(remote_pal_cache_flush, - (void *)&args, 1, 1); + (void *)&args, 1); if (args.status != 0) printk(KERN_ERR"pal_cache_flush error!," "status:0x%lx\n", args.status); -- cgit v1.2.3 From 9354094a95aed456a46b353b1051a7e2fab29045 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 14 Jul 2008 23:29:01 -0700 Subject: x86: fix numaq_tsc_disable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix: arch/x86/kernel/numaq_32.c: In function ‘numaq_tsc_disable’: arch/x86/kernel/numaq_32.c:99: warning: ‘return’ with a value, in function returning void Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar --- arch/x86/kernel/numaq_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c index 5b20a5e7ac28..a23e8233b9ac 100644 --- a/arch/x86/kernel/numaq_32.c +++ b/arch/x86/kernel/numaq_32.c @@ -96,7 +96,7 @@ int __init get_memcfg_numaq(void) void __init numaq_tsc_disable(void) { if (!found_numaq) - return -1; + return; if (num_online_nodes() > 1) { printk(KERN_DEBUG "NUMAQ: disabling TSC\n"); -- cgit v1.2.3 From 2567d71cc7acd99f0a0dd02e17fe17fd7df7b30c Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 15 Jul 2008 15:02:27 +1000 Subject: x86: fix asm/e820.h for userspace inclusion MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit asm-x86/e820.h is included from userspace. 'x86: make e820.c to have common functions' (b79cd8f1268bab57ff85b19d131f7f23deab2dee) broke it: make -C Documentation/lguest cc -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include lguest.c -lz -o lguest In file included from ../../include/asm-x86/bootparam.h:8, from lguest.c:45: ../../include/asm/e820.h:66: error: expected ‘)’ before ‘start’ ../../include/asm/e820.h:67: error: expected ‘)’ before ‘start’ ../../include/asm/e820.h:68: error: expected ‘)’ before ‘start’ ../../include/asm/e820.h:72: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘e820_update_range’ ... Signed-off-by: Rusty Russell Cc: Yinghai Lu Signed-off-by: Ingo Molnar --- include/asm-x86/e820.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/asm-x86/e820.h b/include/asm-x86/e820.h index 33e793e991d0..06633b01dd5b 100644 --- a/include/asm-x86/e820.h +++ b/include/asm-x86/e820.h @@ -59,6 +59,7 @@ struct e820map { struct e820entry map[E820_X_MAX]; }; +#ifdef __KERNEL__ /* see comment in arch/x86/kernel/e820.c */ extern struct e820map e820; extern struct e820map e820_saved; @@ -115,7 +116,7 @@ extern void setup_memory_map(void); extern char *default_machine_specific_memory_setup(void); extern char *machine_specific_memory_setup(void); extern char *memory_setup(void); - +#endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ #define ISA_START_ADDRESS 0xa0000 -- cgit v1.2.3